Keeping Naval Guns Ready

DTIC Science & Technology

2016-03-01

Keeping Naval Guns Ready David L. Rogers Rogers is the Deputy Department Head, Systems Integration Department, Naval Surface Warfare Center Indian...maritime routes and the global economy. This protection depends on keeping these forward naval ships ready, par- ticularly their guns and ammunition...the weapons of choice for counter- ing a multitude of threats. That gun readiness is assured with responsive technical support. It is done fast, and

Development of a New ReadiStep™ Scale Linked to the PSAT/NMSQT® Scale. Research Report 2013-4

ERIC Educational Resources Information Center

Kim, YoungKoung; Hendrickson, Amy; Patel, Priyank; Melican, Gerald; Sweeney, Kevin

2013-01-01

The purpose of this report is to describe the procedure for revising the ReadiStep™ score scale using the field trial data, and to provide technical information about the development of the new ReadiStep scale score. In doing so, this report briefly introduces the three assessments--ReadiStep, PSAT/NMSQT®, and SAT®--in the College Board Pathway…

Pedagogical Conditions of Ensuring Students' Readiness for Scientific Researches--Example of Technical University

ERIC Educational Resources Information Center

Slessarev, Yuri Vassilyevich; Moisseyev, Vassily Borisovich; Vostroknutov, Evgeniy Vladimirovich

2015-01-01

This article describes pedagogical conditions of ensuring students readiness for scientific researches on the basis of scientific literature and experience of Penza State Technological University students. Introduction of suggested conditions favors the process of training of highly skilled expert who is ready for generation of new ideas in fields…

Transition Planning for African-American Learning Disabled Students: Are Career and Technical Education Schools the Key to Postsecondary Success?

ERIC Educational Resources Information Center

Walker, Tara D.

2017-01-01

Career and technical education (CTE) programs have been a part of secondary education reform efforts in Georgia aimed at closing the achievement gaps among disadvantaged groups and preparing all students to be college and career ready. The problem is African-American students with learning disabilities (AASWLD) continue to have worse postsecondary…

Operational readiness for conducting global health research abroad.

PubMed

McDonald, Judy M; Gyorkos, Theresa W

2016-12-27

Research excellence is the goal of all researchers. Conducting quality research with the ultimate aim of improving health is a shared goal among researchers in the global health domain. The competencies required for conducting and producing quality research in global health go far beyond the academic or scientific spheres. They incorporate aspects of research partnership, which places humility, empathy, and mutual respect at its core. Conducting quality respectful global health research requires an appropriate balance of operational readiness (i.e., technical, physical, and mental readiness). This paper reports on the pertinence and potential shaping of conceptual work and exploratory research focusing on aspects of mental readiness. These aspects may be perceived to be significant enough to influence success and warrant further investigation in the context of conducting global health research abroad.

Improvements in State and Local Planning for Mass Dispensing of Medical Countermeasures: The Technical Assistance Review Program, United States, 2007-2014.

PubMed

Renard, Paul G; Vagi, Sara J; Reinold, Chris M; Silverman, Brenda L; Avchen, Rachel N

2017-09-01

To evaluate and describe outcomes of state and local medical countermeasure preparedness planning, which is critical to ensure rapid distribution and dispensing of a broad spectrum of life-saving medical assets during a public health emergency. We used 2007 to 2014 state and local data collected from the Centers for Disease Control and Prevention's Technical Assistance Review. We calculated descriptive statistics from 50 states and 72 local Cities Readiness Initiative jurisdictions that participated in the Technical Assistance Review annually. From 2007 to 2014, the average overall Technical Assistance Review score increased by 13% for states and 41% for Cities Readiness Initiative jurisdictions. In 2014, nearly half of states achieved the maximum possible overall score (100), and 94% of local Cities Readiness Initiative jurisdictions achieved a score of 90 or more. Despite challenges, effective and timely medical countermeasure distribution and dispensing is possible with appropriate planning, staff, and resources. However, vigilance in training, exercising, and improving plans from lessons learned in a sustained, coordinated way is critical to ensure continued public health preparedness success.

Using Readiness Tests To Route Kindergarten Students: The Snarled Intersection of Psychometrics, Policy, and Practice.

ERIC Educational Resources Information Center

Ellwein, Mary Catherine; And Others

The validity of inferences drawn from readiness tests used to place children in a regular or a 2-year kindergarten program was investigated. Data from nine school districts in Virginia were used in the study. The study explored technical characteristics of four commonly used readiness tests: the Brigance Kindergarten and First Grade Screen, the…

Improvements in State and Local Planning for Mass Dispensing of Medical Countermeasures: The Technical Assistance Review Program, United States, 2007–2014

PubMed Central

Vagi, Sara J.; Reinold, Chris M.; Silverman, Brenda L.; Avchen, Rachel N.

2017-01-01

Objectives. To evaluate and describe outcomes of state and local medical countermeasure preparedness planning, which is critical to ensure rapid distribution and dispensing of a broad spectrum of life-saving medical assets during a public health emergency. Methods. We used 2007 to 2014 state and local data collected from the Centers for Disease Control and Prevention’s Technical Assistance Review. We calculated descriptive statistics from 50 states and 72 local Cities Readiness Initiative jurisdictions that participated in the Technical Assistance Review annually. Results. From 2007 to 2014, the average overall Technical Assistance Review score increased by 13% for states and 41% for Cities Readiness Initiative jurisdictions. In 2014, nearly half of states achieved the maximum possible overall score (100), and 94% of local Cities Readiness Initiative jurisdictions achieved a score of 90 or more. Conclusions. Despite challenges, effective and timely medical countermeasure distribution and dispensing is possible with appropriate planning, staff, and resources. However, vigilance in training, exercising, and improving plans from lessons learned in a sustained, coordinated way is critical to ensure continued public health preparedness success. PMID:28892441

Installing the Future. Fiber Optics Program Readies Students for Lucrative Jobs.

ERIC Educational Resources Information Center

Serrano, Kenneth M.

1995-01-01

A fiber optics program at Somerset County Technical Institute (SCTI) prepares college students and trades workers for telecommunication's new wave of installation. The program was born of a partnership among an electricians' union, AT&T, and SCTI to meet the expected need for fiber optic technicians. (JOW)

Thermal energy storage effort at JPL

NASA Technical Reports Server (NTRS)

Young, D. L.

1980-01-01

The technical, operational, and economic readiness of parabolic dish systems for electric and thermal applications was investigated. A parabolic dish system was then developed to the point at which subsequent commercialization activities can lead to successful market penetration. The immediate possible applications of the dish system to thermal energy storage are discussed.

E-health readiness assessment framework in iran.

PubMed

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well.

E-Health Readiness Assessment Framework in Iran

PubMed Central

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Background: Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. Methods: The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. Results: The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). Conclusion: The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well. PMID:23304661

Use of Residual Solids from Pulp and Paper Mills for Enhancing Strength and Durability of Ready-Mixed Concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarun R. Naik; Yoon-moon Chun; Rudolph N. Kraus

2003-09-18

This research was conducted to establish mixture proportioning and production technologies for ready-mixed concrete containing pulp and paper mill residual solids and to study technical, economical, and performance benefits of using the residual solids in the concrete. Fibrous residuals generated from pulp and paper mills were used, and concrete mixture proportions and productions technologies were first optimized under controlled laboratory conditions. Based on the mixture proportions established in the laboratory, prototype field concrete mixtures were manufactured at a ready-mixed concrete plant. Afterward, a field construction demonstration was held to demonstrate the production and placement of structural-grade cold-weather-resistant concrete containing residualmore » solids.« less

77 FR 25995 - Western Technical College; Notice of Application Accepted for Filing With the Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... Technical College; Notice of Application Accepted for Filing With the Commission, Soliciting Motions To Intervene and Protests, Ready for Environmental Analysis, Intent To Waive Scoping, Soliciting Comments....: 13417-002. c. Date filed: October 21, 2011. d. Applicant: Western Technical College. e. Name of Project...

Non-Technical Skill Gaps in Australian Business Graduates

ERIC Educational Resources Information Center

Jackson, Denise; Chapman, Elaine

2012-01-01

Purpose: The need for "job-ready" graduates has catalysed the development of non-technical skills in higher education institutions worldwide. Continued criticism of business school outcomes has provoked this examination of non-technical skill deficiencies in Australian business graduates. The purpose of this paper is to compare findings…

Technical Manual. The ACT®

ERIC Educational Resources Information Center

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

Longitudinal Evaluation of Quality Improvement and Public Health Accreditation Readiness in Nebraska Local Health Departments, 2011-2016.

PubMed

Chen, Li-Wu; Gregg, Abbey; Palm, David

Public health accreditation is intended to improve the performance of public health departments, and quality improvement (QI) is an important component of the Public Health Accreditation Board process. The objective of this study was to evaluate the QI maturity and accreditation readiness of local health departments (LHDs) in Nebraska during a 6-year period that included several statewide initiatives to progress readiness, including funding and technical assistance. We used a mixed-methods approach that consisted of both online surveys and key informant interviews to assess QI maturity and accreditation readiness. Nineteen of Nebraska's 21 LHDs completed the survey in 2011 and 2013, 20 of 20 LHDs completed the survey in 2015, and 19 of 20 LHDs completed the survey in 2016. We facilitated a large group discussion with staff members from 16 LHDs in 2011, and we conducted key informant interviews with staff members from 4 LHDs in 2015. Both QI maturity and accreditation readiness improved from 2011 to 2016. In 2011, of 19 LHDs, only 6 LHD directors agreed that their LHD had a culture that focused on QI, but this number increased every year up to 12 in 2016. The number of LHDs that had a high capacity to engage in QI efforts improved from 3 in 2011 to 8 in 2016. The number of LHDs with a QI plan increased from 3 in 2011 to 10 in 2016. The number of LHDs that were confident in their ability to obtain Public Health Accreditation Board accreditation improved from 6 in 2011 to 13 in 2016. Although their QI maturity generally increased over time, LHDs interviewed in 2015 still faced challenges adopting a formal QI system. External financial and technical support helped LHDs build their QI maturity and accreditation readiness. Funding and technical assistance can improve LHDs' QI maturity and accreditation readiness. Improvement takes time and sustained efforts by LHDs, and support from external partners (eg, state health departments) helps build LHDs' QI maturity and accreditation readiness.

A Preliminary Report on Teaching Academic Readiness. Technical Report #34.

ERIC Educational Resources Information Center

Au, Kathryn H.

This Kamehameha Early Education Program (KEEP) report describes the development of a systematic program for teaching academic readiness skills to kindergarten children who require special help to develop attentional behaviors. The progress of eight kindergarten children (five boys and three girls) is described to illustrate the merit of the…

FRATIS concept of operations : assess test readiness of FRATIS (task 4).

DOT National Transportation Integrated Search

2012-08-01

This technical memorandum presents a concise assessment of the key technical and nontechnical issues and limitations related to field-testing the Freight Advanced Traveler Information System (FRATIS) Dynamic Mobility Applications (DMA) bundle and its...

Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Certa, P.J.

1998-01-07

Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations,more » work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined.« less

The Tobacco Control Network's Policy Readiness and Stage of Change Assessment: What the Results Suggest for Moving Tobacco Control Efforts Forward at the State and Territorial Levels.

PubMed

Roeseler, April; Solomon, Madeleine; Beatty, Carissa; Sipler, Alison M

2016-01-01

The Tobacco Control Network (TCN) is comprised of the tobacco control programs in the health departments of states, territories, and the District of Columbia. During the assessment period, the TCN was managed by the Tobacco Technical Assistance Consortium at Emory University. To assess the readiness of state and territory tobacco control programs to work on evidence-based, promising policy and system change strategies aimed at preventing and reducing tobacco use and secondhand smoke exposure. The Policy Readiness and Stage of Change Assessment was a Web-based survey fielded in September 2013, which was based on the Community Readiness Model. Fifty-nine comprehensive tobacco control programs. State and territory tobacco control program managers and their internal and external partners. The TCN's 2012 Policy Platform recommendations were used as the basis to assess state/territory readiness to adopt and implement evidence-based and promising tobacco control policy/system change strategies. Sixteen tobacco control strategies were rated on: (1) implementation status, (2) readiness, (3) stage of change, and (4) the appropriate level of action for work on the strategy. The 3 strategies with the highest readiness scores were as follows: (1) 100% smoke-free air in workplaces (64%), (2) tobacco-free schools (61%), and (3) $1.50 or less cigarette tax with funds to tobacco control (53%). The 3 strategies with lowest readiness scores were: 1) coupon redemption (17%), 2) tobacco mitigation fee (14%), and 3) disclosure or sunshine laws (8%). Readiness to work on tobacco control strategies varied by region and strategy. Many states/territories are ready to work on strategies for which there is less evidence of a population-level impact for reducing tobacco use, but which contribute to denormalizing tobacco use. Working toward less impactful policies may build support, capacity, and policy success, laying an important foundation to achieve more impactful strategies.

Skill Deterioration and Retraining Needs of Navy Individual Ready Reservists. Technical Report 86-007.

ERIC Educational Resources Information Center

Hall, Eugene R.; And Others

Skill deterioration and retraining needed to support mobilization were determined for Individual Ready Reservists (IRRs) in 16 critical Navy ratings. Mailed questionnaire were used to obtain job performance information (tasks performed and proficiency associated with their performance) from IRRs and active duty personnel. Skill deterioration was…

A practical implementation science heuristic for organizational readiness: R = MC2

PubMed Central

Cook, Brittany S.; Lamont, Andrea; Wandersman, Abraham; Castellow, Jennifer; Katz, Jason; Beidas, Rinad S.

2015-01-01

There are many challenges when an innovation (i.e., a program, process, or policy that is new to an organization) is actively introduced into an organization. One critical component for successful implementation is the organization’s readiness for the innovation. In this article, we propose a practical implementation science heuristic, abbreviated as R= MC2. We propose that organizational readiness involves: 1) the motivation to implement an innovation, 2) the general capacities of an organization, and 3) the innovation-specific capacities needed for a particular innovation. Each of these components can be assessed independently and be used formatively. The heuristic can be used by organizations to assess readiness to implement and by training and technical assistance providers to help build organizational readiness. We present an illustration of the heuristic by showing how behavioral health organizations differ in readiness to implement a peer specialist initiative. Implications for research and practice of organizational readiness are discussed. PMID:26668443

Harvard Education Letter. Volume 22, Number 4, July-August 2006

ERIC Educational Resources Information Center

Chauncey, Caroline, Ed.

2006-01-01

"Harvard Education Letter" is published bimonthly at the Harvard Graduate School of Education. This issue of "Harvard Education Letter" contains the following articles: (1) Beyond Auto Shop 1: Is Career and Technical Education a Promising Path for High School Reform? (Lucy Hood); (2) The School Readiness Gap:…

Motivation, Academic Assessments and First-Semester Success at a Midwestern Technical College

ERIC Educational Resources Information Center

Dillon, Sarah A.

2017-01-01

This study examined college admission criteria and college readiness in an effort to reduce barriers in college admission. The Academic Motivation Scale (AMS) was administered to a convenience sample of 74 participants among 503 students during their first semester at a two-year college. Scale scores were compared to demographic characteristics,…

Readiness for Mobile Learning: Multidisciplinary Cases from Yaroslavl State University

ERIC Educational Resources Information Center

Khryashchev, Vladimir; Kasatkina, Natalia; Sokolenko, Dmitry

2017-01-01

The survey data suggest a high technical and sufficient psychological readiness of Yaroslavl State University students to use mobile devices in learning. The results of the research prove that students have an above the average level of interest and motivation in learning with the help of mobile devices. Nevertheless, it is obvious that there is a…

Seizing the Future: How Ohio's Career-Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Careers

ERIC Educational Resources Information Center

Guarino, Heidi; Yoder, Shaun

2015-01-01

"Seizing the Future: How Ohio's Career and Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Work," demonstrates Ohio's progress in developing strong policies for career and technical education (CTE) programs to promote rigor, including college- and career-ready graduation…

"Educating 21st Century Students: A Close-Up Look at a Successful Career and Technical Center"

ERIC Educational Resources Information Center

Fala, John; Kathryn, Strouse; Tully, Christopher; Viviano, Thomas

2012-01-01

Through this paper we try to convey the necessity to provide the workforce with a labor force that is academically and technologically ready to meet the 21st century global demands. We feel this is accomplished by providing the students at MBIT [Middle Bucks Institute of Technology] with industry-standard equipment, academic and technology…

The Three R's: Resourceful, Resilient, and Ready

ERIC Educational Resources Information Center

Ramaswami, Rama

2009-01-01

The US economic downturn has resulted in many professionals, job seekers, and high school graduates heading back to school to develop new skills, but fewer of these students can afford a conventional four-year college education today. Community and technical colleges typically charge tuition fees that are less than half of those at public…

76 FR 4102 - Smart Grid Interoperability Standards; Supplemental Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid... Federal Energy Regulatory Commission announced that a Technical Conference on Smart Grid Interoperability... National Institute of Standards and Technology are ready for Commission consideration in a rulemaking...

Access Skills. Vocational Readiness Skills Inventory for Special Needs Students. (Revised Entry Level Skills Inventory.) Missouri LINC.

ERIC Educational Resources Information Center

Cassity, Sandra; Boyer-Stephens, Arden

This manual is intended to assist special educators and vocational educators in determining the vocational readiness skills of special needs students. The information in this Missouri inventory is based on data provided by the Michigan Occupational Data Analysis System (ODAS) as a part of the Vocational-Technical Education Consortium of States…

The Pedagogical Readiness of Instructors towards Achieving Integration of ICT's in TVET Institutions in Kenya

ERIC Educational Resources Information Center

Maina, Tirus Muya; Ogalo, James; Mwai, Naomi

2016-01-01

This paper points to the necessity to conduct research on the pedagogical readiness of instructors towards achieving integration of ICT's in Technical and Vocational Education and Training (TVET) institutions in Kenya. Research on the integration of ICTs in teaching and learning in TVET institution in Kenya have been done to improve the learning…

Agreement on Use of 11th Grade Smarter Balanced Assessment Results for Student Placement. Issue Brief

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

This issue brief lists the agreement principles relating to the use of 11th grade career and college readiness assessment results for student placement in Washington community and technical colleges. As part of the Washington implementation of the new Common Core State Standards for college- and career-readiness, the agreement described herein has…

Two Micron Laser Technology Advancements at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Singh, Upendra N.

2010-01-01

An Independent Laser Review Panel set up to examine NASA s space-based lidar missions and the technology readiness of lasers appropriate for space-based lidars indicated a critical need for an integrated research and development strategy to move laser transmitter technology from low technical readiness levels to the higher levels required for space missions. Based on the review, a multiyear Laser Risk Reduction Program (LRRP) was initiated by NASA in 2002 to develop technologies that ensure the successful development of the broad range of lidar missions envisioned by NASA. This presentation will provide an overview of the development of pulsed 2-micron solid-state laser technologies at NASA Langley Research Center for enabling space-based measurement of wind and carbon dioxide.

Control of Technology Transfer at JPL

NASA Technical Reports Server (NTRS)

Oliver, Ronald

2006-01-01

Controlled Technology: 1) Design: preliminary or critical design data, schematics, technical flow charts, SNV code/diagnostics, logic flow diagrams, wirelist, ICDs, detailed specifications or requirements. 2) Development: constraints, computations, configurations, technical analyses, acceptance criteria, anomaly resolution, detailed test plans, detailed technical proposals. 3) Production: process or how-to: assemble, operated, repair, maintain, modify. 4) Manufacturing: technical instructions, specific parts, specific materials, specific qualities, specific processes, specific flow. 5) Operations: how-to operate, contingency or standard operating plans, Ops handbooks. 6) Repair: repair instructions, troubleshooting schemes, detailed schematics. 7) Test: specific procedures, data, analysis, detailed test plan and retest plans, detailed anomaly resolutions, detailed failure causes and corrective actions, troubleshooting, trended test data, flight readiness data. 8) Maintenance: maintenance schedules and plans, methods for regular upkeep, overhaul instructions. 9) Modification: modification instructions, upgrades kit parts, including software

Physically Healthy and Ready to Learn. Technical Assistance Paper No. 1

ERIC Educational Resources Information Center

US Department of Health and Human Services, Head Start Bureau, 2006

2006-01-01

This Technical Assistance Paper offers guidance to programs regarding the implementation of the "Head Start Program Performance Standards" on child health and developmental services, child health and safety, and child nutrition. The paper examines how physical health influences children's development and how child health and development…

Evaluating Research in Career and Technical Education Using Scientifically-Based Research Standards

ERIC Educational Resources Information Center

Gemici, Sinan; Rojewski, Jay W.

2007-01-01

The recent emphasis on scientifically-based research (SBR) as the government's favored research paradigm has direct implications for career and technical education (CTE). From a practical standpoint, federal funds will now be appropriated exclusively on scholars' readiness and ability to engage the "right" research questions. While the…

75 FR 81605 - Smart Grid Interoperability Standards; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid Interoperability Standards; Notice of Technical Conference December 21, 2010. Take notice that the Federal Energy... National Institute of Standards and Technology and included in this proceeding are ready for Commission...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

[Dancing with Pointe Shoes: Characteristics and Assessment Criteria for Pointe Readiness].

PubMed

Wanke, Eileen M; Exner-Grave, Elisabeth

2017-12-01

Training with pointe shoes is an integral part of professional dance education and ambitious hobby dancing. Pointe shoes - developed more than hundred years ago and almost unaltered since then - are highly specific and strike a balance between aesthetics, function, protection, and health care. Therefore, pointe readiness should be tested prior to all dance training or career training. Medical specialists are often confronted with this issue. Specific anatomical dance technique-orientated general conditional and coordinative preconditions as well as dance-technical prerequisites must be met by pointe readiness tests in order to keep traumatic injuries or long-term damage at a minimum. In addition to a (training) history, medical counselling sessions have come to include various tests that enable a reliable decision for or against pointe work. This article suggests adequate testing procedures (STT TEST), taking account of professional dancing as well as hobby dancing. © Georg Thieme Verlag KG Stuttgart · New York.

Report on the oversight assessment of the operational readiness review of the Replacement Tritium Facility at Savannah River Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, B.T.

1993-03-01

This report presents the results of an oversight assessment (OA) conducted by the US Department of Energy's (DOE) Office of Environment, Safety and Health (EH) of operational readiness review (ORR) activities for the Replacement Tritium Facility (RTF) located at Savannah River Site (SRS). The EH OA of this facility took place concurrently with an ORR conducted by the DOE Office of Defense Programs (DP). The DP ORR was conducted from January 19 through February 5, 1993. The EH OA was performed in accordance with the protocol and procedures specified in EH Program for Oversight Assessment of Operational Readiness Evaluations formore » Startups and Restarts,'' dated September 15, 1992. The EH OA Team evaluated the DP ORR to determine whether it was thorough and demonstrated sufficient inquisitiveness to verify that the implementation of programs and procedures adequately ensures the protection of worker safety and health. The EH OA Team performed its evaluation of the DP ORR in the following technical areas: occupational safety, industrial hygiene, and respiratory protection; fire protection; and chemical safety. In the areas of fire protection and chemical safety, the EH OA Team conducted independent vertical-slice reviews to confirm DP ORR results. Within each technical area, the EH OA Team reviewed the DP ORR Plan, including the Criteria Review and Approach Documents (CRADs); the qualifications of individual DP ORR team members; the performance of planned DP ORR activities; and the results of the DP ORR.« less

Report on the oversight assessment of the operational readiness review of the Replacement Tritium Facility at Savannah River Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, B.T.

1993-03-01

This report presents the results of an oversight assessment (OA) conducted by the US Department of Energy`s (DOE) Office of Environment, Safety and Health (EH) of operational readiness review (ORR) activities for the Replacement Tritium Facility (RTF) located at Savannah River Site (SRS). The EH OA of this facility took place concurrently with an ORR conducted by the DOE Office of Defense Programs (DP). The DP ORR was conducted from January 19 through February 5, 1993. The EH OA was performed in accordance with the protocol and procedures specified in ``EH Program for Oversight Assessment of Operational Readiness Evaluations formore » Startups and Restarts,`` dated September 15, 1992. The EH OA Team evaluated the DP ORR to determine whether it was thorough and demonstrated sufficient inquisitiveness to verify that the implementation of programs and procedures adequately ensures the protection of worker safety and health. The EH OA Team performed its evaluation of the DP ORR in the following technical areas: occupational safety, industrial hygiene, and respiratory protection; fire protection; and chemical safety. In the areas of fire protection and chemical safety, the EH OA Team conducted independent vertical-slice reviews to confirm DP ORR results. Within each technical area, the EH OA Team reviewed the DP ORR Plan, including the Criteria Review and Approach Documents (CRADs); the qualifications of individual DP ORR team members; the performance of planned DP ORR activities; and the results of the DP ORR.« less

Setting Academic Performance Standards: MCAS vs. PARCC. Technical Report. Policy Brief

ERIC Educational Resources Information Center

Phelps, Richard P.

2015-01-01

Political realities dictate that, as with any tests, passing scores on those developed by the Partnership for Assessment of Readiness for College and Careers (PARCC) will be set at a level that avoids having an unacceptable number of students fail. Since Massachusetts is by far the highest performing of the states that remain in the PARCC…

The Future of CTE: Programs of Study

ERIC Educational Resources Information Center

Shumer, Rob; Digby, Cynthia

2012-01-01

Education in today's world is very challenging. From concerns over the funding of career and technical education (CTE) to discussions about the achievement gap and dropout prevention, to debates about what it means to be college- and career-ready, the role of CTE in educational reform paradoxically is both at the forefront and on the backburner of…

Multidimensional model to assess the readiness of Saudi Arabia to implement evidence based child maltreatment prevention programs at a large scale.

PubMed

Almuneef, Maha A; Qayad, Mohamed; Noor, Ismail K; Al-Eissa, Majid A; Albuhairan, Fadia S; Inam, Sarah; Mikton, Christopher

2014-03-01

There has been increased awareness of child maltreatment in Saudi Arabia recently. This study assessed the readiness for implementing large-scale evidence-based child maltreatment prevention programs in Saudi Arabia. Key informants, who were key decision makers and senior managers in the field of child maltreatment, were invited to participate in the study. A multidimensional tool, developed by WHO and collaborators from several middle and low income countries, was used to assess 10 dimensions of readiness. A group of experts also gave an objective assessment of the 10 dimensions and key informants' and experts' scores were compared. On a scale of 100, the key informants gave a readiness score of 43% for Saudi Arabia to implement large-scale, evidence-based CM prevention programs, and experts gave an overall readiness score of 40%. Both the key informants and experts agreed that 4 of the dimensions (attitudes toward child maltreatment prevention, institutional links and resources, material resources, and human and technical resources) had low readiness scores (<5) each and three dimensions (knowledge of child maltreatment prevention, scientific data on child maltreatment prevention, and will to address child maltreatment problem) had high readiness scores (≥5) each. There was significant disagreement between key informants and experts on the remaining 3 dimensions. Overall, Saudi Arabia has a moderate/fair readiness to implement large-scale child maltreatment prevention programs. Capacity building; strengthening of material resources; and improving institutional links, collaborations, and attitudes toward the child maltreatment problem are required to improve the country's readiness to implement such programs. Copyright © 2013 Elsevier Ltd. All rights reserved.

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

Reducing Risk in DoD Software-Intensive Systems Development

DTIC Science & Technology

2016-03-01

intensive systems development risk. This research addresses the use of the Technical Readiness Assessment (TRA) using the nine-level software Technology...The software TRLs are ineffective in reducing technical risk for the software component development. • Without the software TRLs, there is no...effective method to perform software TRA or reduce the technical development risk. The software component will behave as a new, untried technology in nearly

Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W; Laird, Daniel; Costello, Ronan

This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

Early Market TRL/MRL Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa; Stetson, Ned

he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less

Directory of AFRL/HEA Technical Publications Submitted to DTIC from 1969 to 2007

DTIC Science & Technology

2007-09-01

Research Division ( AFRL /HEA) 2004 to 30 September 1007 – Air Force Research Laboratory , Warfighter Readiness Research Division ( AFRL /HEA...NUMBER 2003 AIR FORCE RESEARCH LABORATORY WARFIGHTER TRAINING RESEARCH DIVISION ( AFRL /HEA) TECHNICAL DOCUMENTS AUTHOR(S) AFRL -HE-AZ-TP-2003...NUMBER WORK UNIT NUMBER 2002 AIR FORCE RESEARCH

Promoting Work-Based Learning: Efforts in Connecticut and Kentucky

ERIC Educational Resources Information Center

Alliance for Excellent Education, 2012

2012-01-01

In the summer of 2012, the National Association of State Directors of Career Technical Education Consortium (NASDCTEc) and the Alliance for Excellent Education conducted a survey of State Directors of Career Technical Education (CTE) to gauge state efforts to better connect CTE with a larger college- and career-readiness agenda. Survey questions…

Measuring School Effectiveness: Technical Report on the 2011 Value-Added Model. Technical Report

ERIC Educational Resources Information Center

National Center on Scaling Up Effective Schools, 2014

2014-01-01

High school dropout, enrollment, and graduation rates are important indicators of students' college and career readiness, which in turn significantly impact both individual income levels and the overall knowledge-driven economy. Despite the long-term benefits of a high school education, much of the current literature on raising school…

College Readiness and Workforce Challenges

ERIC Educational Resources Information Center

Evans, Thomas G.; Cook, Harry J.

2011-01-01

One of the key points of agreement among educators is that highly successful schools must disseminate best practices so that all can benefit. Eastern Technical High School, part of Baltimore County (MD) Public Schools, is a career and technical education (CTE) high school where students gain the knowledge and skills they need to pursue a career in…

NGST Science Instruments and Process

NASA Technical Reports Server (NTRS)

Mather, John

1999-01-01

Possible NGST (Next Generation Space Telescope) instruments have been studied by NASA, ESA (European Space Agency), and CSA (Canadian Space Agency) teams, and their reports were presented at this meeting and published on the NGST web sites. The instrument capabilities will be evaluated by the Ad Hoc Science Working Group and the technical readiness will be reviewed by a technical panel. Recommendations will be made to the NASA Project Scientist, who will present a report for public comment. NASA. ESA, and the CSA will then allocate instrument, responsibilities in early 2000. NASA will choose its scientific investigations with instruments in 2002.

ReadyVax: A new mobile vaccine information app.

PubMed

Bednarczyk, Robert A; Frew, Paula M; Salmon, Daniel A; Whitney, Ellen; Omer, Saad B

2017-05-04

Vaccine information of varying quality is available through many different sources. We describe the creation, release and utilization of ReadyVax, a new mobile smartphone app providing access to trustworthy, evidence-based vaccine information for a target audience of healthcare providers, pharmacists, and patients (including parents of children). We describe the information content and technical development of ReadyVax. Between the hard launch of the app on February 12, 2015 and October 8, 2016, the app has been downloaded by 5,142 unique users, with 6,841 total app sessions initiated, comprising a total of 15,491 screen views (2.3 screens/session on average). ReadyVax has been downloaded by users in 102 different countries; most users (52%) are from the United States. We are continuing outreach efforts to increase app use, and planning for development of an Android-compatible version of ReadyVax, to increase the available market for the app.

ReadyVax: A new mobile vaccine information app

PubMed Central

Bednarczyk, Robert A.; Frew, Paula M.; Salmon, Daniel A.; Whitney, Ellen; Omer, Saad B.

2017-01-01

Abstract Vaccine information of varying quality is available through many different sources. We describe the creation, release and utilization of ReadyVax, a new mobile smartphone app providing access to trustworthy, evidence-based vaccine information for a target audience of healthcare providers, pharmacists, and patients (including parents of children). We describe the information content and technical development of ReadyVax. Between the hard launch of the app on February 12, 2015 and October 8, 2016, the app has been downloaded by 5,142 unique users, with 6,841 total app sessions initiated, comprising a total of 15,491 screen views (2.3 screens/session on average). ReadyVax has been downloaded by users in 102 different countries; most users (52%) are from the United States. We are continuing outreach efforts to increase app use, and planning for development of an Android-compatible version of ReadyVax, to increase the available market for the app. PMID:28059610

State Transition to High-Quality, College/Career-Ready Assessments: A Workbook for State Action on Key Policy, Legal, and Technical Issues. Updated

ERIC Educational Resources Information Center

Achieve, Inc., 2013

2013-01-01

Over the next few years, states will be transitioning to new, high-quality assessments aligned to the Common Core State Standards (CCSS) or other state college- and career-ready (CCR) standards. States are committed to making this transition in a manner that is determined and thoughtful--to help transform teaching and learning, advance CCR…

The JPL isolated application experiment series

NASA Technical Reports Server (NTRS)

Levin, R. R.

1981-01-01

The technical, operational, and economic readiness of parabolic dish power systems for a variety of applications in the power range below 10 MWe are discussed. Power systems are developed and tested to the point where commercialization efforts lead to successful market penetration. A key element in this strategy is the use of experiments to test hardware and assess operational readiness. The Isolated Application Experiments are described and their objectives discussed.

Who Is Likely to Graduate High School Ready for College? Technical Brief

ERIC Educational Resources Information Center

Ling, Jizhi; Radunzel, Justine

2017-01-01

A majority of high school graduates aspire to earn a college degree (ACT, 2016), yet many students are graduating from high school unprepared to do college-level work. As a result, about one-third of college freshmen enroll in at least one developmental course upon entry to college (Skomsvold, 2014). Because developmental courses are often not…

Thermionic fuel element for the S-prime reactor

NASA Astrophysics Data System (ADS)

Van Hagan, Thomas H.; Drees, Elizabeth A.

1993-01-01

Technical aspects of the thermionic fuel element (TFE) design proposed for the S-PRIME space nuclear power system are discussed. Topics covered include the rational for selecting a multicell TFE approach, a technical description of the S-PRIME TFE and its estimated performance, and the technology readiness of the design, which emphasizes techology maturity and low risk.

The Future of Career Technical Education (CTE) Assessment. Executive Summary

ERIC Educational Resources Information Center

Council of Chief State School Officers, 2011

2011-01-01

On behalf of the states that participated in the 2009-10 State Collaborative on Assessment and Student Standards (SCASS) on Technical Skills Assessment, this paper addresses two significant issues facing the nation: ensuring that more students are both college and career ready and addressing the need for better and more quality data to evaluate…

Balancing Career and Technical Education with Academic Coursework: The Consequences for Mathematics Achievement in High School

ERIC Educational Resources Information Center

Bozick, Robert; Dalton, Benjamin

2013-01-01

Federal legislation has attempted to move career and technical education (CTE) from a segregated component of the high school curriculum to an integrated element that jointly improves both academic and career readiness. However, concerns remain about the ability of CTE to improve academic learning. Using a nationally representative sample of high…

Corrosion Control of Central Vehicle Wash Facility Pump Components Using Alternative Alloy Coatings

DTIC Science & Technology

2016-07-01

military installations are es- sential for supporting the readiness of tactical vehicles. Steel wash-rack pumps are vulnerable to accelerated...Management Command (IMCOM). The technical monitors were Daniel J. Dunmire (OUSD(AT&L)), Bernie Rodriguez (IMPW-FM), and Valerie D. Hines (DAIM-ODF...statement Large steel water pumps are used to pump water into the Central Vehicle Wash Facility (CVWF) for vehicle washing at Fort Polk, LA. The interior

Transforming Effective Army Units: Best Practices and Lessons Learned

DTIC Science & Technology

2013-08-01

Unlimited 106 Dorothy Young 703-545-2316 ii iii Technical Report 1326 Effective Army Units: Best Practices and Lessons Learned...SBCT units at Joint Base Lewis -McChord (JBLM), and two civilian subject matter experts on transformation from the Program Manager (PM) Stryker and...ISR Intelligence, Surveillance, Reconnaissance JBLM Joint Base Lewis -McChord JRTC Joint Readiness Training Center A-2 LNO Liaison

Smart Start and Preschool Child Care Quality in North Carolina: Change Over Time and Relation to Children's Readiness.

ERIC Educational Resources Information Center

Bryant, Donna; Maxwell, Kelly; Taylor, Karen; Poe, Michele; Peisner-Feinberg, Ellen; Bernier, Kathleen

The primary goal of Smart Start is to ensure that all children enter school healthy and prepared to succeed. Smart Start has funded a variety of technical assistance (TA) activities to improve child care, including on-site technical assistance, quality improvement and facility grant, teacher education scholarships, license upgrades, teacher salary…

Curriculum Integration: Helping Career and Technical Education Students Truly Develop College and Career Readiness

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Richardson, George B.

2017-01-01

All students need to learn how to read, write, solve mathematics problems, and understand and apply scientific principles to succeed in college and/or careers. The challenges posed by entry-level career fields are no less daunting than those posed by college-level study. Thus, career and technical education students must learn effective math,…

The Perkins Act of 2006: Connecting Career and Technical Education with the College and Career Readiness Agenda. Achieve Policy Brief

ERIC Educational Resources Information Center

Meeder, Hans

2008-01-01

Policymakers and educators around the nation are wrestling with an important challenge--how to raise expectations for high school achievement, while increasing relevance and engagement in learning to keep students in school. Career and technical education (CTE) is receiving renewed attention as a strategy for increasing school engagement and rigor…

21st Century Readiness Skills for Career and Technical Education

ERIC Educational Resources Information Center

Bennett, Tyrone L.

2012-01-01

The 21st century has embraced the technological age by storm and has approached us quicker than most have expected, leaving many still stuck in the 20th century. Technical careers require very skilled workers and their education has sprung as a strong vehicle all over the country but still most of our employed citizens, especially the youth, have…

PES-51

EPA Pesticide Factsheets

Technical product bulletin: this miscellaneous oil spill control agent comes already mixed and ready for use in cleanups. Through various application methods, it is effective in shoreline and surface treatment, tank cleaning, and equipment decontamination.

From carbon to actinides: A new universal 1MV accelerator mass spectrometer at ANSTO

NASA Astrophysics Data System (ADS)

Wilcken, K. M.; Hotchkis, M.; Levchenko, V.; Fink, D.; Hauser, T.; Kitchen, R.

2015-10-01

A new 1 MV NEC pelletron AMS system at ANSTO is presented. The spectrometer comprises large radius magnets for actinide measurements. A novel feature of the system is fast switching between isotopes both at low and high energy sections allowing measurements of up to 8 isotopes within a single sequence. Technical details and layout of the spectrometer is presented. Performance data for 14C, 10Be, 26Al and actinides demonstrate the system is ready for routine AMS measurements.

Assessment of the Technical Maturity of Generation IV Concepts for Test or Demonstration Reactor Applications, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

2015-10-01

The United States Department of Energy (DOE) commissioned a study the suitability of different advanced reactor concepts to support materials irradiations (i.e. a test reactor) or to demonstrate an advanced power plant/fuel cycle concept (demonstration reactor). As part of the study, an assessment of the technical maturity of the individual concepts was undertaken to see which, if any, can support near-term deployment. A Working Group composed of the authors of this document performed the maturity assessment using the Technical Readiness Levels as defined in DOE’s Technology Readiness Guide . One representative design was selected for assessment from of each ofmore » the six Generation-IV reactor types: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). Background information was obtained from previous detailed evaluations such as the Generation-IV Roadmap but other technical references were also used including consultations with concept proponents and subject matter experts. Outside of Generation IV activity in which the US is a party, non-U.S. experience or data sources were generally not factored into the evaluations as one cannot assume that this data is easily available or of sufficient quality to be used for licensing a US facility. The Working Group established the scope of the assessment (which systems and subsystems needed to be considered), adapted a specific technology readiness scale, and scored each system through discussions designed to achieve internal consistency across concepts. In general, the Working Group sought to determine which of the reactor options have sufficient maturity to serve either the test or demonstration reactor missions.« less

Ready, Set, Go!

ERIC Educational Resources Information Center

Thomas, Middleman Irene

1992-01-01

Presents personal accounts of Hispanic entrepreneurs who have successfully established small businesses. Young Hispanic entrepreneurs frequently experience age discrimination and have difficulty securing financing. The Small Business Administration can provide technical assistance, training, and development. (KS)

Entrepreneurship Education: A Shining Opportunity for Collaboration.

ERIC Educational Resources Information Center

Ely, Vivien King

1984-01-01

Characteristics of successful entrepreneurs are technical competence, business management skills, self-confidence, and intellectual honesty. Entrepreneurship education can be planned to coincide with the individual's life stages and readiness for entrepreneurship. (SK)

Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (12th, Oxford, Ohio, February 13-15, 1985).

ERIC Educational Resources Information Center

Samuels, Marilyn Schauer, Ed.

The papers in this proceedings of the Council for Programs in Technical and Scientific Communication (CPTSC) conference discuss collaboration with other disciplines, with business and industry, and with research foundations, reflecting the readiness to reach out that characterizes CPTSC in its second decade. Papers in the proceedings are:…

Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

DTIC Science & Technology

1981-02-01

Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

Book Review: Space Research at the Technical University of Moldova.

NASA Astrophysics Data System (ADS)

Gaina, Alex

Recently the historian of the Technical University of Moldova Aurel Marinchuk (Marinciuc) in a collaboration with the editorial team from the same University has published a Jubiliary Album "50 Years of the Technical University of Moldova". The Album is published at the Technical University in Chisinau (The Republic of Moldova). Two chapters of this album present major interest: 1) Space research at the Technical University of Moldova 2) The Foucault Pendulum manufactured at the same University under the supervision of the Rector of University, Dr. Hab. of Technical Sciences and Member of the Academy of Sciences of the Republic of Moldova Ion Bostan. The parameters of the Pendulums are: m=102 kg L=17,24 m T=8.35 sec. >From the first chapter We learn that 3 astronauts: Frank Lee Culbertson, Vladimir Dezhurov and Dumitru Dorin Prunariu are Doctors Honoris Causa of this University. As well we can found in the album informations about the Microsatellit "Republic of Moldova" built also by a team from the same University. It is ready to fly, but many depends on the funds for launch the Satellite. The Foucault Pendulum presents also interest in view of its possible applications to detect the influence of the relative position of the Sun and the Moon on Earthquakes. As is well known the tidal gravitational Force varies, depending on the relative position of the Sun and the Moon.

Social networks and community prevention coalitions.

PubMed

Feinberg, Mark E; Riggs, Nathaniel R; Greenberg, Mark T

2005-07-01

This study investigates the links between community readiness and the social networks among participants in Communities That Care (CTC), community-based prevention coalitions. The coalitions targeted adolescent behavior problems through community risk factor assessments, prioritization of risk factors, and selection/implementation of corresponding evidence-based family, school, and community programs. Key leaders (n = 219) in 23 new CTC sites completed questionnaires focusing on community readiness to implement CTC and the respondents' personal, work, and social organization links to other key leaders in the community. Outside technical assistants also completed ratings of each community's readiness and early CTC functioning. Measures of network cohesion/integration were positively associated with readiness, while centralization was negatively associated. These results suggest that non-centralized networks in which ties between members are close and direct may be an indicator of community readiness. In addition, we found different associations between readiness and different domains of social relations. EDITORS' STRATEGIC IMPLICATIONS: The authors present the promising practice of using social network analysis to characterize the functioning of local prevention coalitions and their readiness to implement a community-based prevention initiative. Researchers and community planners will benefit from the lessons in this article, which capitalizes on a large sample and multiple informants. This work raises interesting questions about how to combine the promotion of coalition functioning while simultaneously encouraging diversity of coalition membership.

A Phenomenological Study Examining the Experiences of High School Graduates Who Participated in a Career and Technical Education Program of Study

ERIC Educational Resources Information Center

Goins, Camille Locklear

2015-01-01

Career and Technical Education (CTE) programs are designed to help prepare students to become effective workers by equipping them with college and career readiness skills needed for the 21st century workplace. Students who participate in a CTE Program of Study (POS) have the potential for greater success during and after high school because they…

Part II: preparing and assessing first-year radiology resident on-call readiness technical implementation.

PubMed

Yam, Chun-Shan; Kruskal, Jonathan; Pedrosa, Ivan; Kressel, Herbert

2006-06-01

The effectiveness of using a Digital Imaging and Communications in Medicine (DICOM)-based interactive examination system in evaluating the readiness of first year radiology residents before taking overnight call in the emergency department (ED) was reported in part I of this article. This report describes technical aspects for the design and implementation of this system. The examination system consists of two modules: Data Collection and Image Viewing. The Data Collection module was a personal computer (PC)-based DICOM storage server based on a free public domain software package, the Mallinckrodt Central Test Node. The Image Viewing module was a Java-based DICOM viewer created using another freeware package: zDicom ActiveX component. The examination takes place once a year at the end of the first 6-month rotation. Cases selected for the examination were actual clinical cases according to the American Society of Emergency Radiology core curriculum. In the 3-hour timed examination, each resident was required to read the cases and provide clinical findings and recommendations. Upper-level residents also participated in the examination to serve as a control. Answers were scored by two staff radiologists. We have been using this examination system successfully in our institution since 2003 to evaluate the readiness of the first-year residents before they take overnight call in the ED. This report describes a step-by-step procedure for implementing this system into a PC-based platform. This DICOM viewing software is available as freeware to other academic radiology institutions. The total cost for implementing this system is approximately 2000 US dollars.

Commander’s ’Right to Know’ Health Information: A Strategically Flawed Innovation

DTIC Science & Technology

2011-03-21

calculus . Further, except in cases of exigency, the ―disclosure authority‖ should reside at least one supervisory level higher, in technical...adverse impact on promotion. Therefore, by excluding PTS or TBI-related counseling from the security clearance calculus , DOD recognized the real and...patients according to AR 40-400‖ ; to ―report the Soldier‘s dental classification‖; to ―carry out Soldier Readiness Program and mobilization processing

DoD Physical Security Technical Support at the 1980 Winter Olympics Village.

DTIC Science & Technology

1980-09-02

support were provided to the 1980 Winter Olympic Games were: (1) Physical Security, (2) Communications- Electronics , and (3) Medical via the New York Army...vibration-based Fence Pro- tection System (FPS), manufactured by General Telephone and Electronics (GT& E ) and installed for the Federal Bureau of Prisons...CM (Mr. Woomert) DRSXY-GB (Mr. R. E . Cam) Aberdeen Proving Ground, MD 21005 Commander US Army Communications and Electronics Material Readiness

Get Ready 'Cause Here It Comes: The Future of Marketing Communication (Marketing Writing for Technical Products).

ERIC Educational Resources Information Center

King, Janice

1995-01-01

Discusses trends for the future in marketing communication: expanding channels for communication, global marketing, product brands, and changing jobs. Suggests ways marketing communicators can prepare for these changes. (SR)

Checklists for 45/90 Preliminary Technical Screen

EPA Pesticide Factsheets

We use checklists to ensure that the application is ready for in depth review, as required by FIFRA. Applicants can use them to help ensure their applications are complete. You may submit the checklist with the application.

1994 OTC spotlights fall on technology, world operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-09

Expanding offshore technical capabilities and growing international cooperation were the key-notes last week at the 26th Offshore Technology Conference (OTC) in Houston. Sponsored by the Society of Petroleum Engineers, sessions heard many of the 244 technical papers presented this year focus on field-ready technology considered crucial to more efficient, safer, environmentally sound offshore oil and gas operations. Economic development of satellite and marginal fields was the topic at special technical sessions on the conference's first two mornings. Three dimensional seismic technology was thoroughly discussed in a day-long series of papers presented during the gathering's third day. OTC 1994 topical luncheonsmore » included descriptions by Shell Offshore Inc. of its record setting auger field development project in the Gulf of Mexico, offshore turnkey drilling by a panel of drilling contractors, and the international exploration and production alliance formed in 1990 by BP Exploration and Den norske stats oljeselskap AS. Highlights of the melting are discussed.« less

Our Theme for 2016: Sustaining Momentum

DTIC Science & Technology

2016-03-01

of design architectures and interfaces to make both open sys- tems and modularity a reality. This is “owning the technical baseline,” and the devil... write this year, although we will be implementing the changes required in the Fiscal Year (FY) 2016 National Defense Au- thorization Act. We still...Defense for Acquisition, Technology, and Logistics on the momentum we have gained as we get ready for a new administration next year. Promote Technical

Iteration and Prototyping in Creating Technical Specifications.

ERIC Educational Resources Information Center

Flynt, John P.

1994-01-01

Claims that the development process for computer software can be greatly aided by the writers of specifications if they employ basic iteration and prototyping techniques. Asserts that computer software configuration management practices provide ready models for iteration and prototyping. (HB)

Workforce Readiness: Competencies and Assessment.

ERIC Educational Resources Information Center

O'Neil, Harold F., Jr., Ed.

This book, which is intended for professionals in the assessment/evaluation/measurement, vocational and technical education, and educational psychology communities, contains 16 papers examining specifications of work force competencies and assessment of competencies. The following papers are included: "Review of Workforce Readiness…

SIMBIOS Project

NASA Technical Reports Server (NTRS)

Fargion, Giulietta S.; McClain, Charles R.; Busalacchi, Antonio J. (Technical Monitor)

2001-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRAI) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project.

OSD CALS Architecture Master Plan Study. Concept Paper. Configuration Management. Volume 28

DOT National Transportation Integrated Search

1989-10-01

The mission of CALS is to enhance operational readiness of DoD weapon systems through application of information technology to the management of technical information. CALS will automate the current paper-intensive processes involved in weapon system...

Feasibility and Requirements Analysis of MIS for Operational Patrol Squadrons in the United States Navy.

DTIC Science & Technology

1981-12-01

with statistical data on the -est questions themselves and allows upgrading of the test ques-ion bank or changes in the method of presentation. (5...accessed to meet on-line inquires from users at the OMA, INA, and SSC levels, utilizing a number of different to access similar data. A query capability...technical directive and configured item capability * nonthly Maintanance Plan *Individual material Readiness List (I21RL) SPIE calibration Expand JCN4 Tracki

Proceedings of the 16th Project Integration Meeting

NASA Technical Reports Server (NTRS)

Mcdonald, R. R.

1980-01-01

The principal achievement of the Low Cost Solar Array Project in 1980 was the attainment of $2.80/Wp Technical Readiness, and that processes and equipment now commercially available can make possible a deliverable product in 1982. A prototype array for intermediate load applications was demonstrated using frameless modules. It was proof tested to 40 lb/sq ft loading, and priced at $24/sq m, including array fabrication, module installation, shipping to the site and site installation for quantities of 20 MW.

U.S. Department of Energy Zero Energy Ready Home Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rothgeb, Stacey K; Schirber, T.; Mosiman, G.

The intention of this project is to assist home builders in the upper Midwest in achieving DOE Zero Energy Ready Home program certification, and to document the process and outcomes involved in meeting this rigorous standard. NorthernSTAR, in conjunction with our program partner Building Knowledge, Inc., provided technical support to the builders during the design and construction process. At the time of this publication, four qualifying homes have been completed and an additional three are currently under construction to be completed later this year. Three additional homes were excluded from certification due to the HVAC contractor not completing their requiredmore » credentialing until after completion of the homes, though the energy performance would have otherwise qualified the homes for program certification. Both Amaris Homes and Cobblestone Homes note that participation in the ZERH program provides them with competitive advantage in the market place at reasonable construction costs that also result in extremely satisfied clients who are willing to recommend the builders to friends and family.« less

Technical Evaluation Report on the Guidance and Control Panel Symposium (29th) on Air Traffic Management Civil/Military Systems and Technologies.

DTIC Science & Technology

1980-03-01

language, reliance upon instrumental (technical) versus biologi - cal ( human ) capabilities, etc. The latter - the appreciative one - is not expressed...infrastructure, and most of human contribution, should be ready for servi- cing the military scene in case of high tension, or in the context of hostility...already proven "feasible changes*. 10 81 In a similar way of improvement ( 751 and [ 771 give additional information about DABS and a DABS/ ATARS

SIMBIOS Project 1999 Annual Report

NASA Technical Reports Server (NTRS)

McClain, Charles R.; Fargion, Giulietta S.

1999-01-01

The purpose of this technical memorandum is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project.

SIMBIOS Project 1998 Annual Report

NASA Technical Reports Server (NTRS)

McClain, Charles R.; Fargion, Giulietta, S.

1999-01-01

The purpose of this series of technical reports is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Ocean Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant to substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issues by an operational project.

Success Stories Profiles.

ERIC Educational Resources Information Center

Douthitt, Frieda; And Others

This packet contains the stories of 20 successful alumni of Ohio's secondary vocational programs and postsecondary technical schools. They have been reproduced as loose-leaf camera-ready art. Suggested uses for these one-page biographies with accompanying photograph include the following: illustrations for use in speeches; reproduction of complete…

Readiness Based Sparing: A Research Summary

DTIC Science & Technology

2012-07-01

TIGER and SESAME. Retrieved from Defense Technical Information Center. (ADA283943) Geis, M. B., Camper, V. S., Measell , B. H., & Oi, J. S. (1995...Camper, V. S., & Measell , B. H. (1993). Aviation logistics support: Retail sparing issues. Retrieved from CNA. (2793002000) Kinskie, S. W. (1997). An

Special Vocational Program for Handicapped Youth and Adults. Revised Edition.

ERIC Educational Resources Information Center

Jernberg, Donald E.

The Salina Area Vocational Technical School has a special vocational program which provides selected vocational training courses for students with physical, emotional, or intellectual handicaps. The program offers vocational counseling, placement services, work evaluation, job readiness training, and vocational training tryouts. Vocational…

Common Standards for Career Education Programs

ERIC Educational Resources Information Center

Missouri Department of Elementary and Secondary Education, 2012

2012-01-01

The Office of College and Career Readiness has developed the "Common Standards for Career Education Programs." The six common standards are: (1) Program Management and Planning; (2) Curriculum; (3) Instruction; (4) Professional Development; (5) Career and Technical Student Organizations; and (6) Instructional Facilities and Equipment.…

An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

NASA Technical Reports Server (NTRS)

Flynn, Michael

2000-01-01

This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

NREL and Sandia National Laboratories (SNL) Support of Ocean Renewable Power Company's TidGen™ Power System Technology Readiness Advancement Initiative Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

LiVecchi, Al

2015-05-07

This document summarizes the tasks identified for National Laboratory technical support of Ocean Renewable Power Corporation (ORPC) DOE grant awarded under the FY10 Industry Solicitation DE-FOA-0000293: Technology Readiness Advancement Initiative. The system ORPC will deploy in Cobscook Bay, ME is known as the TidGen™ Power System. The Turbine Generator Unit (TGU) each have a rated capacity of 150 to 175 kW, and they are mounted on bottom support frames and connected to an onshore substation using an underwater power and control cable. This system is designed for tidal energy applications in water depths from 60 to 150 feet. In fundingmore » provided separately by DOE, National Laboratory partners NREL and SNL will provide in-kind resources and technical expertise to help ensure that industry projects meet DOE WWPP (Wind and Water Power Program) objectives by reducing risk to these high value projects.« less

Psychosocial and cessation-related differences between tobacco-marijuana co-users and single product users in a college student population.

PubMed

Masters, Matthew N; Haardörfer, Regine; Windle, Michael; Berg, Carla

2018-02-01

Limited research has examined psychosocial factors that differ among cigarette users, marijuana users, and co-users and influence their cessation efforts. We examined: 1) sociodemographic, mental health, and other substance use in relation to user category; and 2) associations among these factors in relation to recent quit attempts and readiness to quit among single product versus co-users. We used a cross-sectional design to study college students aged 18-25 from seven Georgia campuses, focusing on the 721 reporting cigarette and/or marijuana use in the past 4months (238 cigarette-only; 331 marijuana-only; 152 co-users). Multinomial logistic regression showed that correlates (p's<0.05) of cigarette-only versus co-use included attending public or technical colleges (vs. private) and not using little cigars/cigarillos (LCCs), e-cigarettes, and alcohol. Correlates of marijuana-only versus co-use included being Black or Hispanic (vs. White), not attending technical school, and not using LCCs and e-cigarettes. Importance was rated higher for quitting cigarettes versus marijuana, but confidence was rated lower for quitting cigarettes versus marijuana (p's<0.001). Co-users were more likely to report readiness to quit and quit attempts of cigarettes versus marijuana (p's<0.001). While 23.26% of marijuana-only and 15.13% of cigarette-only users reported readiness to quit, 41.18% of cigarette-only and 21.75% of marijuana-only users reported recent quit attempts (p's<0.001). Binary logistic regressions indicated distinct correlates of readiness to quit and quit attempts of cigarettes and marijuana. Cessation efforts of the respective products must attend to co-use with the other product to better understand relative perceptions of importance and confidence in quitting and actual cessation efforts. Copyright © 2017 Elsevier Ltd. All rights reserved.

National Water Infrastructure Adaptation Assessment, Part I: Climate Change Adaptation Readiness Analysis

EPA Science Inventory

The report “National Water Infrastructure Adaptation Assessment” is comprised of four parts (Part I to IV), each in an independent volume. The Part I report presented herein describes a preliminary regulatory and technical analysis of water infrastructure and regulations in the ...

USSR Report: Cybernetics, Computers and Automation Technology

DTIC Science & Technology

1986-12-03

Georgian SSR Academy of Sciences: "Ready for Dialogue"] [Text] Computers in schools, auditoria , and educational laboratories are an phenomenon to which we...professional-technical academies and VUZ auditoria . Obviously, the color of the screens and the characters on them is of major importance for people

PLANNING A NATURE CENTER.

ERIC Educational Resources Information Center

ASHBAUGH, BYRON L.

THIS BULLETIN IS PRODUCED BY THE NATURE CENTERS DIVISION, NATIONAL AUDUBON SOCIETY TO PROVIDE PROFESSIONAL GUIDANCE AND TECHNICAL KNOW-HOW IN THE DEVELOPMENT OF COMMUNITY NATURE AND CONSERVATION CENTERS. THE TOPICS COVERED ARE--(1) PURPOSE AND VALUE OF A NATURE AND CONSERVATION CENTER, (2) INITIAL CONSIDERATIONS SUCH AS COMMUNITY READINESS, LAND…

Technical Review of the CENWP Computational Fluid Dynamics Model of the John Day Dam Forebay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rakowski, Cynthia L.; Serkowski, John A.; Richmond, Marshall C.

The US Army Corps of Engineers Portland District (CENWP) has developed a computational fluid dynamics (CFD) model of the John Day forebay on the Columbia River to aid in the development and design of alternatives to improve juvenile salmon passage at the John Day Project. At the request of CENWP, Pacific Northwest National Laboratory (PNNL) Hydrology Group has conducted a technical review of CENWP's CFD model run in CFD solver software, STAR-CD. PNNL has extensive experience developing and applying 3D CFD models run in STAR-CD for Columbia River hydroelectric projects. The John Day forebay model developed by CENWP is adequatelymore » configured and validated. The model is ready for use simulating forebay hydraulics for structural and operational alternatives. The approach and method are sound, however CENWP has identified some improvements that need to be made for future models and for modifications to this existing model.« less

Vibration and loads in hingeless rotors. Volume 2: Experimental data

NASA Technical Reports Server (NTRS)

Watts, G. A.; London, R. J.

1972-01-01

Descriptions, geometry, and technical data covering three rotor systems are presented. Tables of experimental data gathered during wind tunnel testing of two of the systems are included. Both analyzed experimental data, ready for comparison with theory, and the basic reduced data from which they were obtained are reported.

Online Testing Suffers Setbacks in Multiple States

ERIC Educational Resources Information Center

Davis, Michelle R.

2013-01-01

Widespread technical failures and interruptions of recent online testing in a number of states have shaken the confidence of educators and policymakers in high-tech assessment methods and raised serious concerns about schools' technological readiness for the coming common-core online tests. The glitches arose as many districts in the 46 states…

A Virtual World with Real Results

ERIC Educational Resources Information Center

Hughes, Katherine L.; Golann, Joanne Wang

2008-01-01

This article describes how students learn invaluable job-readiness and academic skills by setting up and running their own businesses in a virtual world. Virtual Enterprises (VE) International is a high school career and technical education (CTE) program that teaches students about business by having a class create and operate its own virtual…

Technical College Graduate Perceptions of College and Career Readiness

ERIC Educational Resources Information Center

Hanson, Dale M.

2013-01-01

The United States workplace requires increased levels of postsecondary education to support workforce development for an economy driven by technology, automation and global competition. By 2018, 63 % of new jobs created will require postsecondary education (Carnevale, Smith, & Strohl, 2010). Currently, one in four graduates earns a bachelor's…

Assessing the Impact of a Summer Internship Program for Teachers and Counselors.

ERIC Educational Resources Information Center

Russell, Jill F.; Reiser, Mary Lynn

1999-01-01

Discusses an evaluation of a summer internship program for Omaha, Nebraska, educators that stressed scientific/technical work experience. Results suggest that internship programs can provide a growth experience for teachers and can positively influence students' knowledge, skills, and readiness for the world of work. (MLH)

A Response to Factory Closings: A Career Development Approach.

ERIC Educational Resources Information Center

Deady, John; White, Winifred Parker

This report describes the Career Planning Center, formerly the Institute for Vocational Readiness program, run by the Student Services Division of the Milwaukee Area Technical College. It briefly describes services offered by the center which are focused around a comprehensive diagnostic approach, offering students help in developing a positive…

Facing Disaster: A Tale of Two Colleges, One System, and Their Response to Hurricane Katrina

ERIC Educational Resources Information Center

Collins, Kelley Rhoe; Savage, Robert; Wainwright, William

2008-01-01

This article presents three situations (a community college, a technical college, and a state system) and describes the responses to substantial hurricane storm damages sustained by the physical infrastructure in each case. A disaster readiness checklist is provided. (Contains 1 table.)

KEEP Reading Research: 1972-1975. Technical Report No. 57.

ERIC Educational Resources Information Center

Au, Kathryn H.

This report presents a summary of reading research conducted by the Kamehameha Early Education Program (KEEP) during 1972-75. Research was conducted in four areas: student industriousness, reading readiness, teaching of sound-symbol relationships, and language (especially dialect interference). With regard to industriousness, it was found that…

Efficacy of Dual Enrollment in Rural Southwest Virginia

ERIC Educational Resources Information Center

Carter, Karen Glass

2009-01-01

The intent of this dissertation was to determine if enrollment into a career and technical education dual enrollment program encouraged students to continue their education into postsecondary education and if workplace readiness skills were increased. This study completed a factorial analysis of student demographic and factorial data as associated…

Pollution Analyzing and Monitoring Instruments.

ERIC Educational Resources Information Center

1972

Compiled in this book is basic, technical information useful in a systems approach to pollution control. Descriptions and specifications are given of what is available in ready made, on-the-line commercial equipment for sampling, monitoring, measuring and continuously analyzing the multitudinous types of pollutants found in the air, water, soil,…

Predictors of Postsecondary Success

ERIC Educational Resources Information Center

Hein, Vanessa; Smerdon, Becky; Sambolt, Megan

2013-01-01

The purpose of this brief is to provide information to state, district, and school personnel seeking support to determine whether their students are on a path to postsecondary success. The College and Career Readiness and Success Center (CCRS Center) has received technical assistance requests from a number of states regarding factors that predict…

Incoming Students: Are They Ready? FACTC Focus, 2009

ERIC Educational Resources Information Center

Doerr, Mark, Ed.

2009-01-01

"FACTC Focus" is a publication of Faculty Association of Community and Technical Colleges (FACTC) with the purpose of presenting diverse views on faculty issues. Included in this issue are: (1) Grade Forgiveness: A Good Idea? (Ruth Frickle); (2) Getting Pre-College Students Connected (Phil Venditti); (3) Abbreviations confusion: Are…

MODIS Validation, Data Merger and Other Activities Accomplished by the SIMBIOS Project: 2002-2003

NASA Technical Reports Server (NTRS)

Fargion, Giulietta S.; McClain, Charles R.

2003-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, satellite data processing, and data product validation. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report focuses on the SIMBIOS Project s efforts in support of the Moderate-Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) Terra platform (similar evaluations of MODIS/Aqua are underway). This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project.

NASA's 2004 Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jacobson, David T.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2004-01-01

An overview of NASA's Hall thruster research and development tasks conducted during fiscal year 2004 is presented. These tasks focus on: raising the technology readiness level of high power Hall thrusters, developing a moderate-power/ moderate specific impulse Hall thruster, demonstrating high-power/high specific impulse Hall thruster operation, and addressing the fundamental technical challenges of emerging Hall thruster concepts. Programmatic background information, technical accomplishments and out year plans for each program element performed under the sponsorship of the In-Space Transportation Program, Project Prometheus, and the Energetics Project are provided.

A Multi-Center Space Data System Prototype Based on CCSDS Standards

NASA Technical Reports Server (NTRS)

Rich, Thomas M.

2016-01-01

Deep space missions beyond earth orbit will require new methods of data communications in order to compensate for increasing RF propagation delay. The Consultative Committee for Space Data Systems (CCSDS) standard protocols Spacecraft Monitor & Control (SM&C), Asynchronous Message Service (AMS), and Delay/Disruption Tolerant Networking (DTN) provide such a method. The maturity level of this protocol set is, however, insufficient for mission inclusion at this time. This prototype is intended to provide experience which will raise the Technical Readiness Level (TRL) of these protocols..

Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honeyman, J.O.

1998-01-09

This Management Assessment of Tank Waste Remediation System (TWRS) Contractor Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technicalmore » Baselines, work breakdown structures, tank farms organizational structure and configurations, work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on-line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined.« less

The Role of the Technical Specialist in Disaster Response and Recovery

NASA Astrophysics Data System (ADS)

Curtis, J. C.

2017-12-01

Technical Specialists provide scientific expertise for making operational decisions during natural hazards emergencies. Technical Specialists are important members of any Incident Management Team (IMT) as is described in in the National Incident Management System (NIMS) that has been designed to respond to emergencies. Safety for the responders and the threatened population is the foremost consideration in command decisions and objectives, and the Technical Specialist is on scene and in the command post to support and promote safety while aiding decisions for incident objectives. The Technical Specialist's expertise can also support plans, logistics, and even finance as well as operations. This presentation will provide actual examples of the value of on-scene Technical Specialists, using National Weather Service "Decision Support Meteorologists" and "Incident Meteorologists". These examples will demonstrate the critical role of scientists that are trained in advising and presenting life-critical analysis and forecasts during emergencies. A case will be made for local, state, and/or a national registry of trained and deployment-ready scientists that can support emergency response.

What Schools Are Doing around Career Development: Implications for Policy and Practice

ERIC Educational Resources Information Center

Perry, Justin C.; Wallace, Eric W.

2012-01-01

This article describes the role that schools are playing in supporting career development for young people. It examines the history of career-related programming in schools, including school-to-work programs, career and technical education, the college and career readiness movement, and current school reform initiatives. This understanding of…

Trade and Technical Volumes I: Access Skills. Vocational Readiness Skills. Missouri LINC. Assessing Vocational Education.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Dept. of Practical Arts and Vocational-Technical Education.

This document contains trade and industrial occupations-related materials to help teachers and parents teach access skills to Missouri junior high and high school special needs students who want to pursue a vocational program in carpentry; commercial art; drafting; electronics; heating, air conditioning, and refrigeration; or offset lithography…

Dynamic Assessment: One Approach and Some Initial Data. Technical Report No. 361.

ERIC Educational Resources Information Center

Campione, Joseph C.; Brown, Ann L.

In an effort to validate dynamic assessment methods influenced by Vygotsky's (1978) definition of zones of proximal development (an indicator of readiness), three sets of experiments addressed two goals: the development of diagnostic assessment methods and the use of diagnostic results to guide the design of instructional programs. The first two…

Glossary of SSDC terms and acronyms. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horman, R.L.

1992-12-01

This combination glossary and list of acronyms and abbreviations was compiled to provide the user a ready reference to System Safety Development Center (SSDC) terms. The acronyms are from the publication INEL Acronyms published by the Technical Publications Group. This group updates these acronyms periodically; the version used in this report was dated October 1992.

Glossary of SSDC terms and acronyms. [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horman, R.L.

1992-12-01

This combination glossary and list of acronyms and abbreviations was compiled to provide the user a ready reference to System Safety Development Center (SSDC) terms. The acronyms are from the publication INEL Acronyms published by the Technical Publications Group. This group updates these acronyms periodically; the version used in this report was dated October 1992.

OR2020: The Operating Room of the Future

DTIC Science & Technology

2004-05-01

25 3.3 Technical Requirements: Standards and Tools for Improved Operating R oom Process Integration...Image processing and visualization tools must be made available to the operating room. 5. Communications issues must be addressed and aim toward...protocols for effectively performing advanced surgeries and using telecommunications-ready tools as needed. The following recommendations were made

Extending Social Networking into the Secondary Education Sector

ERIC Educational Resources Information Center

Kio, Su Iong

2016-01-01

Secondary schools do not have the same technical resources and capabilities as universities. They usually need to rely on ready-to-use tools to fulfill their information and communication technology (ICT) structure. Social networking site (SNS) has emerged as a practical solution to this need. However, few have collected empirical data on the…

The Need for Dedicated Technical Rescue Companies

DTIC Science & Technology

2010-08-01

California Task Force 1 (CA- TF1 ) from Los Angeles was deployed as an entire ele- ment of more than 200 personnel. Soldiers from the 911th Engineers...more Soldiers who deployed to Haiti had been ready to perform urban search and res- cue operations without on-site training, perhaps more CA- TF1

Globally Ready--or Not?

ERIC Educational Resources Information Center

Tucker, Marc

2016-01-01

To be prepared for the new world of work--one that outsourcing and automation have transformed--U.S. schools need to set a higher bar. Students need high-level cognitive skills, strong technical skills, character, good communications skills, a well-developed ethical frame, and the ability to relate to a wide range of people from all over the…

Technological Barriers to Success in Distance Education: The Revolving Door of Online Education

ERIC Educational Resources Information Center

Roe, Richard Thomas

2011-01-01

Taking online courses has become a delivery mode of choice for many students. This collaborative study focuses on the impact of college readiness; technological resources, and course design on student success in an online introduction to computers distance education course within the Kentucky Community and Technical College System (KCTCS). The…

Embedding Volunteer Activity into Paramedic Education.

PubMed

Ross, Linda; Kabidi, Sophia

2017-01-01

Paramedics require a wide range of skills that are beyond clinical or technical skills in order to meet the demands of the role and provide quality and compassionate care to patients. Non-technical or "soft" skills and attributes are generally challenging to teach and develop in the classroom setting. Volunteerism provides an opportunity for students to gain exposure to different communities and develop interpersonal skills. This cross-sectional study used one-on-one interviews with 12 third-year Bachelor of Emergency Health (Paramedic) students from Monash University, Australia, who completed a community volunteering program. Results suggest that paramedic students see volunteering as a highly valuable means of developing a number of skills crucial to their future roles and paramedic practice. Volunteering also provided students with an opportunity to learn about themselves and the broader community, develop confidence, and improve overall job-readiness and employability. This study demonstrates that embedding volunteering into paramedic education is an effective way to develop the broad range of paramedic attributes required for the role. These experiences allow students to make the important transition to a job-ready graduate paramedic who can provide holistic patient-centred care.

In Situ Aerosol Optical Thickness Collected by the SIMBIOS Program (1997-2000): Protocols, and and Data QC and Analysis

NASA Technical Reports Server (NTRS)

Fargion, Giulietta S.; Barnes, Robert; McClain, Charles

2001-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project Office activities on in situ aerosol optical thickness (i.e., protocols, and data QC and analysis). This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project.

Support activities to maintain SUMS flight readiness, volume 2. Attachment A: Flight 61-C report

NASA Technical Reports Server (NTRS)

Wright, Willie

1992-01-01

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation system (STS). The experiment mission operation begins about 1 hour to shuttle de-orbit entry maneuver and continues until reaching 1.6 torr (about 86 km altitude). The SUMS flew a total of three missions, 61C, STS-35, and STS-40. Between flights, the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399. This volume is the flight data report for flight 61-C.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobos, Peter Holmes; Malczynski, Leonard A.; Walker, La Tonya Nicole

People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and marketmore » acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’« less

Determination of technical readiness for an atmospheric carbon imaging spectrometer

NASA Astrophysics Data System (ADS)

Mobilia, Joseph; Kumer, John B.; Palmer, Alice; Sawyer, Kevin; Mao, Yalan; Katz, Noah; Mix, Jack; Nast, Ted; Clark, Charles S.; Vanbezooijen, Roel; Magoncelli, Antonio; Baraze, Ronald A.; Chenette, David L.

2013-09-01

The geoCARB sensor uses a 4-channel push broom slit-scan infrared imaging grating spectrometer to measure the absorption spectra of sunlight reflected from the ground in narrow wavelength regions. The instrument is designed for flight at geostationary orbit to provide mapping of greenhouse gases over continental scales, several times per day, with a spatial resolution of a few kilometers. The sensor provides multiple daily maps of column-averaged mixing ratios of CO2, CH4, and CO over the regions of interest, which enables flux determination at unprecedented time, space, and accuracy scales. The geoCARB sensor development is based on our experience in successful implementation of advanced space deployed optical instruments for remote sensing. A few recent examples include the Atmospheric Imaging Assembly (AIA) and Helioseismic and Magnetic Imager (HMI) on the geostationary Solar Dynamics Observatory (SDO), the Space Based Infrared System (SBIRS GEO-1) and the Interface Region Imaging Spectrograph (IRIS), along with sensors under development, the Near Infared camera (NIRCam) for James Webb (JWST), and the Global Lightning Mapper (GLM) and Solar UltraViolet Imager (SUVI) for the GOES-R series. The Tropospheric Infrared Mapping Spectrometer (TIMS), developed in part through the NASA Instrument Incubator Program (IIP), provides an important part of the strong technological foundation for geoCARB. The paper discusses subsystem heritage and technology readiness levels for these subsystems. The system level flight technology readiness and methods used to determine this level are presented along with plans to enhance the level.

Definition and Development of Habitation Readiness Levels (HRLs) for Planetary Surface Habitats

NASA Technical Reports Server (NTRS)

Connolly, Janis H.; Toups, Larry

2007-01-01

One could argue that NASA has never developed a true habitat for a planetary surface, with only the Lunar Module from the 1960's-era Apollo Program providing for a sparse 2 person, 3 day capability. An integral part of NASA's current National Vision for Space Exploration is missions back to the moon and eventually to Mars. One of the largest leaps i11 lunar surface exploration beyond the Apollo lunar missions will be the conduct of these extended duration human missions. These missions could range from 30 to 90 days in length initially and may eventually range up to 500 days in length. To enable these extended duration human missions, probably the single-most important lunar surface element is the Surface Habitat. The requirements that must be met by the Surface Habitat will go far beyond the safety, performance and operational requirements of the Lunar Module, and NASA needs to develop a basis for making intelligent, technically correct habitat design decisions. This paper will discuss the possibilities of the definition and development of a Habitation Readiness Level (HRL) scale that might be mapped to current Technology Readiness Levels (TRLs) for technology development. HRLs could help measure how well a particular technology thrust is advanced by a proposed planetary habitat concept. The readiness level would have to be measured differently than TRLs, and may include such milestones as habitat design performance under simulated mission operations and constraints (including relevant field testing), functional allocation demonstrations, crew interface evaluation and post-occupancy evaluation. With many concepts for planetary habitats proposed over the past 20 years, there are many strategic technical challenges facing designers of planetary habitats that will support NASA's exploration of the moon and Mars. The systematic assessment of a variety of planetary habitat options will be an important approach and will influence the associated requirements for human design, volumetrics, functionality, systems hardware and operations.

An Alignment Analysis of Washington State's College Readiness Mathematics Standards with Various Local Placement Tests

ERIC Educational Resources Information Center

Achieve, Inc., 2006

2006-01-01

For the past two years, Achieve, Inc. has worked with the Transition Mathematics Project (TMP), a collaborative project of K-12 schools, community and technical colleges, and baccalaureate institutions within the state of Washington, as it developed mathematics standards that "define the core knowledge and skills expected of students entering…

Trade and Technical. Volume II. Access Skills. Vocational Readiness Skills. Missouri LINC. Assessing Vocational Education.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Dept. of Practical Arts and Vocational-Technical Education.

This document contains trade and industrial occupations-related materials to help teachers and parents teach access skills to Missouri junior high and high school special needs students who want to pursue a vocational program in auto body repair, auto mechanics, building maintenance and custodial work, diesel mechanics, machinist, small engine…

A Social Media Practicum: An Action-Learning Approach to Social Media Marketing and Analytics

ERIC Educational Resources Information Center

Atwong, Catherine T.

2015-01-01

To prepare students for the rapidly evolving field of digital marketing, which requires more and more technical skills every year, a social media practicum creates a learning environment in which students can apply marketing principles and become ready for collaborative work in social media marketing and analytics. Using student newspapers as…

Business-School Cooperatives: Meeting Educational Needs. Bar/School Partnership Programs Series.

ERIC Educational Resources Information Center

Taylor, Elenor

Business-school cooperatives are a potential solution to the need of students and educators to learn more about business, its functions in U.S. society, and the need of businesses to have a future workforce ready to face the challenges of an increasingly more complicated and highly technical work atmosphere. Such cooperatives, which are an…

Pretest and Posttest Results of the First KEEP Program Year. Technical Report #5.

ERIC Educational Resources Information Center

Gallimore, Ronald; And Others

This report presents a pre- and posttest evaluation of the first program year of the Kamehameha Early Education Program (KEEP). Each of the 28 children in the KEEP kindergarten class received three tests: the Wechsler Preschool and Primary Scale of Intelligence (WPPSI), the Metropolitan Readiness Test (MRT), and the Standard English Repetition…

Pre- and Post-Test Results of KEEP Class 2: 1973-74. Technical Report #40.

ERIC Educational Resources Information Center

Fox, Candy

This report presents the pre-and posttest results for the kindergarten year of the Kamehameha Early Education Program (KEEP) Class 2, 1973-1974. Results are presented for the Wechsler Preschool and Primary Scale of Intelligence (WPPSI), the Metropolitan Readiness Test (MRT), and the Standard English Repetition Test (SERT). Comparisons are made…

User's Guide to OASIS, Oceanic and Atmospheric Scientific Information System. Key to Oceanic and Atmospheric Information Sources No. 1.

ERIC Educational Resources Information Center

National Oceanic and Atmospheric Administration (DOC), Washington, DC. Environmental Data Service.

OASIS (Oceanic and Atmospheric Scientific Information System) is an information retrieval service that furnishes ready reference to the technical literature and research efforts concerning the environmental sciences and marine and coastal resources. It provides computerized searches of both NOAA (National Oceanic and Atmospheric Administration)…

The Point of the Point: Washington's Student Achievement Initiative through the Looking Glass of a Community College

ERIC Educational Resources Information Center

Li, Amy Y.

2017-01-01

For 8 years Washington State has operated a performance funding policy, the Student Achievement Initiative (SAI). The policy allocates appropriations to the state's 34 community and technical colleges based on points earned through student achievement of college-readiness, retention, and completion milestones. Grounded in a conceptual framework of…

Molecular Shocks Associated with Massive Young Stars: CO Line Images with a New Far-Infrared Spectroscopic Camera on the Kuiper Airborne Observatory

NASA Technical Reports Server (NTRS)

Watson, Dan M.

1997-01-01

Under the terms of our contract with NASA Ames Research Center, the University of Rochester (UR) offers the following final technical report on grant NAG 2-958, Molecular shocks associated with massive young stars: CO line images with a new far-infrared spectroscopic camera, given for implementation of the UR Far-Infrared Spectroscopic Camera (FISC) on the Kuiper Airborne Observatory (KAO), and use of this camera for observations of star-formation regions 1. Two KAO flights in FY 1995, the final year of KAO operations, were awarded to this program, conditional upon a technical readiness confirmation which was given in January 1995. The funding period covered in this report is 1 October 1994 - 30 September 1996. The project was supported with $30,000, and no funds remained at the conclusion of the project.

Sources of Variability in Chlorophyll Analysis by Fluorometry and High-Performance Liquid Chromatography in a SIMBIOS Inter-Calibration Exercise

NASA Technical Reports Server (NTRS)

VanHeukelem, Laurie; Thomas, Crystal S.; Gilbert, Patricia M.; Fargion, Giulietta S. (Editor); McClain, Charles R. (Editor)

2002-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project. This particular document focus on the variability in chlorophyll pigment measurements resulting from differences in methodologies and laboratories conducting the pigment analysis.

8-Meter UV/Optical Space Telescope

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2008-01-01

This slide presentation proposes using the unprecedented capability of the planned Ares V launch vehicle, to place a 8 meter monolithic space telescope at the Earth-Sun L2 point. This new capability enables a new design pardigm -- simplicity. The six to eight meter class telescope with a massive high Technical Readiness Level ground observatory class monolithic primary mirror has been determined feasible. The proposed design, structural analysis, spacecraft design and shroud integration, thermal analysis, propulsion system, guidance navigation and pointing control assumptions about the avionics, and power systems, operational lifetime, and the idea of in-space servicing are reviewed.

X-ray satellite (ROSAT)

NASA Technical Reports Server (NTRS)

1986-01-01

With regards to technical performance, the project is running according to plan. An increase in total cost outlay was required. The new Dornier Systems schedule projects ROSAT launch readiness for April 27, 1988. However, as a result of the Challenger accident, no binding launch date has been received from NASA. The thirteenth status review was conducted at the prime contractor in March, 1986. Assembly of the FM mirror system has been interrupted due to irregularities in the gold damping; in addition, mission operation and simulator development are effected by understaffing. Postponements have been announced in the data transmission and components acquisition subsystems.

Broad Area Cooler Concepts for Cryogenic Propellant Tanks

NASA Technical Reports Server (NTRS)

Christie, R. J.; Tomsik, T. M.; Elchert, J. P.; Guzik, M. C.

2011-01-01

Numerous studies and ground tests have shown that broad area cooling (also known as distributed cooling) can reduce or eliminate cryogenic propellant boil-off and enable long duration storage in space. Various combinations of cryocoolers, circulators, heat exchangers and other hardware could be used to build the system. In this study, several configurations of broad area cooling systems were compared by weighing hardware combinations, input power requirements, component availability, and Technical Readiness Level (TRL). The preferred system has a high TRL and can be scaled up to provide cooling capacities on the order of 150W at 90K

Career Profile- Subscale UAS engineer/pilot Robert "Red" Jensen- Operations Engineering Branch

NASA Image and Video Library

2015-08-03

Robert “Red” Jensen is an Operations Engineer and Pilot for subscale aircraft here at NASA’s Armstrong Flight Research Center. As part fabricator, engineer and integrator, Red is responsible for testing subscale models of aircraft and ensuring they are safe, capable of flight and ready to support the center’s needs. Operations engineers are key leaders from technical concept to flight to ensure flight safety and mission success. This video highlights Red’s responsibilities and daily activities as well as some of the projects and missions he is currently working on.

NASA's Space Launch Transitions: From Design to Production

NASA Technical Reports Server (NTRS)

Askins, Bruce; Robinson, Kimberly

2016-01-01

NASA's Space Launch System (SLS) successfully completed its Critical Design Review (CDR) in 2015, a major milestone on the journey to an unprecedented era of exploration for humanity. CDR formally marked the program's transition from design to production phase just four years after the program's inception and the first such milestone for a human launch vehicle in 40 years. While challenges typical of a complex development program lie ahead, CDR evaluators concluded that the design is technically and programmatically sound and ready to press forward to Design Certification Review (DCR) and readiness for launch of Exploration Mission 1 (EM-1) in the 2018 timeframe. SLS is prudently based on existing propulsion systems, infrastructure and knowledge with a clear, evolutionary path as required by mission needs. In its initial configuration, designated Block I, SLS will a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). It can evolve to a 130 t payload capacity by upgrading its engines, boosters, and upper stage, dramatically increasing the mass and volume of human and robotic exploration while decreasing mission risk, increasing safety, and simplifying ground and mission operations. CDR was the central programmatic accomplishment among many technical accomplishments that will be described in this paper. The government/industry SLS team successfully test fired a flight-like five-segment solid rocket motor, as well as seven hotfire development tests of the RS-25 core stage engine. The majority of the major test article and flight barrels, rings, and domes for the core stage liquid oxygen, liquid hydrogen, engine section, intertank, and forward skirt were manufactured at NASA's Michoud Assembly Facility. Renovations to the B-2 test stand for stage green run testing were completed at NASA Stennis Space Center. Core stage test stands are rising at NASA Marshall Space Flight Center. The modified Pegasus barge for core stage transportation from manufacturing to testing and launch sites was delivered. The Interim Cryogenic Propulsion System test article was also completed. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Ultrastable Silicon Cavity in a Continuously Operating Closed-Cycle Cryostat at 4 K

NASA Astrophysics Data System (ADS)

Zhang, W.; Robinson, J. M.; Sonderhouse, L.; Oelker, E.; Benko, C.; Hall, J. L.; Legero, T.; Matei, D. G.; Riehle, F.; Sterr, U.; Ye, J.

2017-12-01

We report on a laser locked to a silicon cavity operating continuously at 4 K with 1 ×10-16 instability and a median linewidth of 17 mHz at 1542 nm. This is a tenfold improvement in short-term instability, and a 1 04 improvement in linewidth, over previous sub-10-K systems. Operating at low temperatures reduces the thermal noise floor and, thus, is advantageous toward reaching an instability of 10-18, a long-sought goal of the optical clock community. The performance of this system demonstrates the technical readiness for the development of the next generation of ultrastable lasers that operate with an ultranarrow linewidth and long-term stability without user intervention.

Ready-to-use foods for management of moderate acute malnutrition: considerations for scaling up production and use in programs.

PubMed

Osendarp, Saskia; Rogers, Beatrice; Ryan, Kelsey; Manary, Mark; Akomo, Peter; Bahwere, Paluku; Belete, Hilina; Zeilani, Mamane; Islam, Munirul; Dibari, Filippo; De Pee, Saskia

2015-03-01

Ready-to-use foods are one of the available strategies for the treatment of moderate acute malnutrition (MAM), but challenges remain in the use of these products in programs at scale. This paper focuses on two challenges: the need for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable local production facility; and the effective use of these products in large-scale community-based programs. Linear programming tools can be used successfully to design local compositions that are in line with international guidelines, low in cost, and acceptable, and the efficacy of these local formulations in the treatment of MAM was recently demonstrated in Malawi. The production of local formulations for programs at scale relies on the existence of a reliable and efficient local production facility. Technical assistance may be required in the development of sustainable business models at an early stage in the process, taking into account the stringent product quality and safety criteria and the required investments. The use of ready-to-use products, as of any food supplement, in programs at scale will be affected by the practice of household sharing and diversion of these products for other uses. Additional measures can be considered to account for sharing. These products designed for the treatment and prevention of MAM are to be used in community-based programs and should therefore be used in conjunction with other interventions and designed so that they do not replace the intake of other foods and breastmilk. Remaining challenges and implications for the (operations) research agenda are discussed.

The Effects of Mandated Career and Technical Education (CTE) on the College and Career Preparation of High School Students

ERIC Educational Resources Information Center

Hagen, Stephen N.

2010-01-01

College and career readiness offers a distinct purpose to the high school experience. This experience must provide a variety of options with a clear focus on fruitful opportunities for success. Meaningful citizenship in any learning community demands that all students participate in a pathway of sequenced, practical, related classes and achieve…

Army Independent Risk Assessment Guidebook

DTIC Science & Technology

2014-04-01

17 5.4.2 Step 2: Gather relevant technology and alternative information............... 17 5.4.3 Step 3: Secure SME support for readiness...level assessment. ................... 17 5.4.4 Step 4: SMEs assess TRL, IRL, and MRL for each technology. .............. 17 5.4.5 Step 5: Identify...technical risks, risk ratings, and mitigations. .................. 20 5.4.6 Step 6: SMEs identify key technologies

Planning and Management Systems for State Programs of Vocational and Technical Education: An Application of Research.

ERIC Educational Resources Information Center

Nowrasteh, Daryush M.

This publication is designed to serve state-level planners interested in reviewing the key concepts of state planning and management systems. The compact nature of the review and its organization in guideline format should provide a ready reference for the practitioner seeking to develop and improve management systems for vocational education in…

Cardinal Manufacturing: A Student-Run Manufacturing Shop

ERIC Educational Resources Information Center

McIntosh, Jamey

2012-01-01

The cardinal rule in career and technical education (CTE) is to train future workers so that they are career-ready when they jump into the working world. In theory, education is made for this; however, many a teacher has asked if they are helping students make the connection between what they are doing in the classroom and what is expected in a…

Fleet Readiness Center - Southeast Technology Development Program (Cadmium & Hexavalent Chromium Reduction)

DTIC Science & Technology

2014-11-01

Industrial Waste Water Treatment  Aircraft & Component Paint Removal (ABM & Chemical)  Chrome Electroplating  Corrosion Treatment  Aircraft...Hex Chrome post treatment )  Energy Use; Electrical (& Steam)  NDI- Florescent Penetrant  Solvent Tank Cleaning  Water (& Sanitary) Use...Engineer Corrosion Science & Engineering NAVAIR Jacksonville Phone: (904) 790-6405 Email: john.benfer@navy.mil ASETS Technical Workshop (NOV

Physics Department Accreditation: Preparing our physics students to enter the workforce

NASA Astrophysics Data System (ADS)

Svinarich, Kathryn

Most undergraduate physics majors enter the workforce after graduation instead of heading to graduate school. For most careers, it's clear that subject matter knowledge is not enough. Graduates must be able to effectively articulate that knowledge to multiple audiences at vastly different levels of technical expertise. Foreign language skills, global awareness, an entrepreneurial mindset, and knowledge of societal context are all important to employers today. These facets of workplace readiness are incorporated into learning outcomes at the heart of the ABET accreditation process. Through ABET accreditation, we are assuring employers that our applied physics graduates are achieving these outcomes and are better prepared for careers, both in and outside academia.

Measuring primary care organizational capacity for diabetes care coordination: the Diabetes Care Coordination Readiness Assessment.

PubMed

Weeks, Douglas L; Polello, Jennifer M; Hansen, Daniel T; Keeney, Benjamin J; Conrad, Douglas A

2014-01-01

Not all primary care clinics are prepared to implement care coordination services for chronic conditions, such as diabetes. Understanding true capacity to coordinate care is an important first-step toward establishing effective and efficient care coordination. Yet, we could identify no diabetes-specific instruments to systematically assess readiness and/or status of primary care clinics to engage in diabetes care coordination. This report describes the development and initial validation of the Diabetes Care Coordination Readiness Assessment (DCCRA), which is intended to measure primary care clinic readiness to coordinate care for adult patients with diabetes. The instrument was developed through iterative item generation within a framework of five domains of care coordination: Organizational Capacity, Care Coordination, Clinical Management, Quality Improvement, and Technical Infrastructure. Validation data was collected on 39 primary care clinics. Content validity, inter-rater reliability, internal consistency, and construct validity of the 49-item instrument were assessed. Inter-rater agreement indices per item ranged from 0.50 to 1.0. Cronbach's alpha of the entire instrument was 0.964, and for the five domain scales ranged from 0.688 to 0.961. Clinics with existing care coordinators were rated as more ready to support care coordination than clinics without care coordinators for the entire DCCRA and for each domain, supporting construct validity. As providers increasingly attempt to adopt patient-centered approaches, introduction of the DCCRA is timely and appropriate for assisting clinics with identifying gaps in provision of care coordination services. The DCCRA's strengths include promising psychometric properties. A valid measure of diabetes care coordination readiness should be useful in diabetes program evaluation, assistance with quality improvement initiatives, and measurement of patient-centered care in research.

The DOE photovoltaics program

NASA Technical Reports Server (NTRS)

Ferber, R. R.

1980-01-01

As part of the National Solar Energy program, the US Department of Energy is now engaged in the development of technically feasible, low cost candidate component and system technologies to the point where technical readiness can be demonstrated by 1982. The overall strategy is to pursue parallel options that continue to show promise of meeting the program goals, thus increasing the probability that at least one technology will be successful. Included in technology development are both flat plate solar collectors and concentrator solar collectors, as well as the balance of system components, such as structures, power conditioning, power controls, protection, and storage. Generally, these last items are common to both flat plate and concentrator systems, but otherwise there is considerable disparity in design philosophy, photovoltaic cell requirements, and possible applications between the two systems. Objectives for research activities at NASA Lewis for stand alone applications, and at Sandia Laboratories where intermediate load center applications are addressed, are highlighted as well as college projects directed by Oak Ridge National Laboratory, and international applications managed by the Solar Energy Research Institute. Joint DOD/DOE effects for military applications are also summarized.

Sensitivity analysis of the add-on price estimate for the silicon web growth process

NASA Technical Reports Server (NTRS)

Mokashi, A. R.

1981-01-01

The web growth process, a silicon-sheet technology option, developed for the flat plate solar array (FSA) project, was examined. Base case data for the technical and cost parameters for the technical and commercial readiness phase of the FSA project are projected. The process add on price, using the base case data for cost parameters such as equipment, space, direct labor, materials and utilities, and the production parameters such as growth rate and run length, using a computer program developed specifically to do the sensitivity analysis with improved price estimation are analyzed. Silicon price, sheet thickness and cell efficiency are also discussed.

Viability of telework at PROCEMPA.

PubMed

Fetzner, Maria Amelia de Mesquita

2003-02-01

At the end of the 20th century, telework appears as one of the modalities of flexible work, which is related to new organizational structures as well as to increasing use of technology. It revolutionizes the traditional ways of performing work. Its implementation creates a number of questions to be answered by the organizations and the individuals involved. This article presents a case study on the viability of implementing telework at Procempa (The Data Processing Company of the City of Porto Alegre). The case study analyzes the technical, organizational, psychological, legal, and labor union dimensions. As a result of this study, we can identify the organization's stage of readiness for telework, the conditions under which it would be implemented, and the specific issues of an implementation.

Heritage Systems Engineering Lessons from NASA Deep Space Missions

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn; Clardy, Dennon

2010-01-01

In the design and development of complex spacecraft missions, project teams frequently assume the use of advanced technology systems or heritage systems to enable a mission or reduce the overall mission risk and cost. As projects proceed through the development life cycle, increasingly detailed knowledge of the advanced and heritage systems within the spacecraft and mission environment identifies unanticipated technical issues. Resolving these issues often results in cost overruns and schedule impacts. The National Aeronautics and Space Administration (NASA) Discovery & New Frontiers (D&NF) Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for 5 missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that optimistic hardware/software inheritance and technology readiness assumptions caused cost and schedule growth for all five missions studied. The cost and schedule growth was not found to be the result of technical hurdles requiring significant technology development. The projects institutional inheritance and technology readiness processes appear to adequately assess technology viability and prevent technical issues from impacting the final mission success. However, the processes do not appear to identify critical issues early enough in the design cycle to ensure project schedules and estimated costs address the inherent risks. In general, the overruns were traceable to: an inadequate understanding of the heritage system s behavior within the proposed spacecraft design and mission environment; an insufficient level of development experience with the heritage system; or an inadequate scoping of the systemwide impacts necessary to implement an advanced technology for space flight applications. The paper summarizes the study s lessons learned in more detail and offers suggestions for improving the project s ability to identify and manage the technology and heritage risks inherent in the design solution.

Heritage and Advanced Technology Systems Engineering Lessons Learned from NASA Deep Space Missions

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn; Clardy, Dennon

2010-01-01

In the design and development of complex spacecraft missions, project teams frequently assume the use of advanced technology systems or heritage systems to enable a mission or reduce the overall mission risk and cost. As projects proceed through the development life cycle, increasingly detailed knowledge of the advanced and heritage systems within the spacecraft and mission environment identifies unanticipated technical issues. Resolving these issues often results in cost overruns and schedule impacts. The National Aeronautics and Space Administration (NASA) Discovery & New Frontiers (D&NF) Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for 5 missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that optimistic hardware/software inheritance and technology readiness assumptions caused cost and schedule growth for four of the five missions studied. The cost and schedule growth was not found to result from technical hurdles requiring significant technology development. The projects institutional inheritance and technology readiness processes appear to adequately assess technology viability and prevent technical issues from impacting the final mission success. However, the processes do not appear to identify critical issues early enough in the design cycle to ensure project schedules and estimated costs address the inherent risks. In general, the overruns were traceable to: an inadequate understanding of the heritage system s behavior within the proposed spacecraft design and mission environment; an insufficient level of development experience with the heritage system; or an inadequate scoping of the system-wide impacts necessary to implement an advanced technology for space flight applications. The paper summarizes the study's lessons learned in more detail and offers suggestions for improving the project's ability to identify and manage the technology and heritage risks inherent in the design solution.

Support activities to maintain SUMS flight readiness, volume 7. Attachment B: Flight STS-35 report, section E

NASA Technical Reports Server (NTRS)

Wright, Willie

1992-01-01

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation System (STS). The experiment mission operation begins about 1 hour prior to shuttle de-orbit entry maneuver and continues until reaching 1.6 torr (about 86 km altitude). The SUMS flew a total of three missions, 61C, STS-35, STS-40. Between flights, the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399. This volume presents data from the reentry of flight STS-35 in tabular and graphical format.

Support activities to maintain SUMS flight readiness, volume 8. Attachment B: Flight STS-35 report, section F

NASA Technical Reports Server (NTRS)

Wright, Willie

1992-01-01

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation System (STS). The experiment mission operation begins about 1 hour prior to shuttle de-orbit entry maneuver and continues until reaching 1.6 torr (about 86 km altitude). The SUMS flew a total of three missions, 61C, STS-35, STS-40. Between flights, the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399. This volume presents tabular and graphical spectral data of the reentry of flight STS-35.

Participatory Carbon Monitoring System in Community Forests of Nepal

NASA Astrophysics Data System (ADS)

Karki, S.

2016-12-01

With the adoption of climate change agreement, Reducing emissions from deforestation and forest degradation (REDD) has advanced as a performance based policy instruments to curtailing the deforestation and forest degradation. Developing countries are working to get REDD ready. However, the readiness assessment process entails criteria such as REDD+ Safeguards are met, monitoring and reporting of emission reductions are verified (MRV). For counties to have MRV in place, technical know-how on measuring forest carbon and capacity of the human resources are limited. International Centre for Integrated Mountain Development (ICIMOD) together with its national partners implemented REDD+ pilot project from 2009-2013 in 105 community forests (CF) of three watersheds namely Charnawati, Kayarkhola and Ludikhola in Nepal. This paper discuss prototype of the participatory carbon monitoring and measurement approach tested in these105 CFs that is systematic, transparent, and cost effective. Additionally it will demonstrate the enhanced carbon stock data from 2010-2013 assembled at ICIMOD Regional Database Initiative are made freely available. Such application can be scaled up or considered in decision making for performance based payment schemes.

Support activities to maintain SUMS flight readiness, volume 3. Attachment B: Flight STS-35 report, section A

NASA Technical Reports Server (NTRS)

Wright, Willie

1992-01-01

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation System (STS). The experiment mission operation begins about 1 hour prior to shuttle de-orbit entry maneuver and continues until reaching 1.6 torr (about 86 km altitude). The SUMS flew a total of three missions, 61C, STS-35, and STS-40. Between flights, the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399. This volume presents flight data for flight STS-35 in graphical format.

Quality improvement and accreditation readiness in state public health agencies.

PubMed

Madamala, Kusuma; Sellers, Katie; Beitsch, Leslie M; Pearsol, Jim; Jarris, Paul

2012-01-01

There were 3 specific objectives of this study. The first objective was to examine the progress of state/territorial health assessment, health improvement planning, performance management, and quality improvement (QI) activities at state/territorial health agencies and compare findings to the 2007 findings when available. A second objective was to examine respondent interest and readiness for national voluntary accreditation. A final objective was to explore organizational factors (eg, leadership and capacity) that may influence QI or accreditation readiness. Cross-sectional study. State and Territorial Public Health Agencies. Survey respondents were organizational leaders at State and Territorial Public Health Agencies. Sixty-seven percent of respondents reported having a formal performance management process in place. Approximately 77% of respondents reported a QI process in place. Seventy-three percent of respondents agreed or strongly agreed that they would seek accreditation and 36% agreed or strongly agreed that they would seek accreditation in the first 2 years of the program. In terms of accreditation prerequisites, a strategic plan was most frequently developed, followed by a state/territorial health assessment and health improvement plan, respectively. Advancements in the practice and applied research of QI in state public health agencies are necessary steps for improving performance. In particular, strengthening the measurement of the QI construct is essential for meaningfully assessing current practice patterns and informing future programming and policy decisions. Continued QI training and technical assistance to agency staff and leadership is also critical. Accreditation may be the pivotal factor to strengthen both QI practice and research. Respondent interest in seeking accreditation may indicate the perceived value of accreditation to the agency.

eHealth adoption factors in medical hospitals: A focus on the Netherlands.

PubMed

Faber, Sander; van Geenhuizen, Marina; de Reuver, Mark

2017-04-01

Despite strong policy interest in eHealth, actual adoption in many European hospitals is low. This study develops and tests in a preliminary way an organisational eHealth adoption model rooted in several adoption frameworks to improve understanding of this phenomenon. The model is explored through a survey among hospitals in the Netherlands using a Structural Equation Modelling (SEM) approach. Specific attention is paid to measurement of organisational readiness and to adoption as a process including different stages. Our results suggest a sharp decrease in the adoption process by hospitals after the stage of interest/commitment. Adoption tends to be significantly affected by size of the hospital, organisational readiness including technical aspects, and top management support. eHealth adoption tends to be not a linear process nor a linear function of contextual antecedents. Organisational readiness is an important antecedent for eHealth adoption. The paper concludes with organisational strategies and policies to foster eHealth adoption in hospitals and suggestions for future study. Copyright © 2017 Elsevier B.V. All rights reserved.

Digital government and public health.

PubMed

Fountain, Jane E

2004-10-01

Digital government is typically defined as the production and delivery of information and services inside government and between government and the public using a range of information and communication technologies. Two types of government relationships with other entities are government-to-citizen and government-to-government relationships. Both offer opportunities and challenges. Assessment of a public health agency's readiness for digital government includes examination of technical, managerial, and political capabilities. Public health agencies are especially challenged by a lack of funding for technical infrastructure and expertise, by privacy and security issues, and by lack of Internet access for low-income and marginalized populations. Public health agencies understand the difficulties of working across agencies and levels of government, but the development of new, integrated e-programs will require more than technical change - it will require a profound change in paradigm.

Renewing Liquid Fueled Molten Salt Reactor Research and Development

NASA Astrophysics Data System (ADS)

Towell, Rusty; NEXT Lab Team

2016-09-01

Globally there is a desperate need for affordable, safe, and clean energy on demand. More than anything else, this would raise the living conditions of those in poverty around the world. An advanced reactor that utilizes liquid fuel and molten salts is capable of meeting these needs. Although, this technology was demonstrated in the Molten Salt Reactor Experiment (MSRE) at ORNL in the 60's, little progress has been made since the program was cancelled over 40 years ago. A new research effort has been initiated to advance the technical readiness level of key reactor components. This presentation will explain the motivation and initial steps for this new research initiative.

Army Science Board FY2000 Summer Study. Technical and Tactical Opportunities for Revolutionary Advances in Rapidly Deployable Joint Ground Forces in the 2015-2025 Era. Volume III: Information Dominance Panel Report

DTIC Science & Technology

2001-04-01

Information Dominance , Sustainment and Support, and Training. The study concludes: 1) the FCS concept is sound, but senior level attention is required to ensure technologies are ready for 2006 FCS EMD; and 2) Key technologies will significantly improve force projection and combat power. The Information Dominance Panel was tasked to: 1) Assess required sensors at National and Theater level; 2) Assess the technological opportunity to provide necessary bandwidth for data, voice and video requirements; 3) Ascertain the requirements to deny the threat

Automated Array Assembly, Phase 2

NASA Technical Reports Server (NTRS)

Daiello, R. V.

1978-01-01

The purpose of the overall program is to establish technological readiness and provide verification for the elements of a manufacturing sequence which would ultimately be suitable for the large-scale production of silicon solar-array modules at a selling price of less than $500/kW. A program and process plan for accomplishing this objective was developed and put into operation. Three junction-formation processes are shown; since cost analysis shows that they do not differ greatly in cost, each should be considered for technical merits and possible future cost reduction. The progress made in the various process steps of the plan is described, and conclusions are presented.

Coalition Battle Management Language (C-BML) (Language de gestion du champ de bataille (C-BML)

DTIC Science & Technology

2012-02-01

de gestion du champ de bataille (C-BML)) NMSG-048 Final Report. This document...BML) (Langage de gestion du champ de bataille (C-BML)) NMSG-048 Final Report. This document contains information authorized by NATO RTA for...Technical Readiness Level (TRL) that is consistent with an operational deployment. ES - 2 RTO-TR-MSG-048 Langage de gestion du champ de

California Diploma Project Technical Report I: Crosswalk Study--Crosswalk of the Intersegmental Committee for the Academic Senate Statements of Competencies to the Common Core State Standards

ERIC Educational Resources Information Center

McGaughy, Charis; de Gonzalez, Alicia

2012-01-01

The Educational Policy Improvement Center (EPIC) conducted an investigation of the Intersegmental Committee for the Academic Senates (ICAS) Statements of Competencies for Mathematics and Academic Literacy. The purpose of this work is to understand how the ICAS competencies relate to college and career readiness, as represented by the augmented…

High-Temperature Gas-Cooled Test Reactor Point Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-04-01

A point design has been developed for a 200 MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched UCO fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technological readiness level, licensing approach and costs.

California Diploma Project Technical Report III: Validity Study--Validity Study of the Health Sciences and Medical Technology Standards

ERIC Educational Resources Information Center

McGaughy, Charis; Bryck, Rick; de Gonzalez, Alicia

2012-01-01

This study is a validity study of the recently revised version of the Health Science Standards. The purpose of this study is to understand how the Health Science Standards relate to college and career readiness, as represented by survey ratings submitted by entry-level college instructors of health science courses and industry representatives. For…

Format Guide for Scientific and Technical Reports.

DTIC Science & Technology

1984-01-01

supported by the discussion. Graphkic Services The Graphic Services Section (Code 2632) provides a variety of layout and design services. Camera-ready artwork...complex typography , elaborate graphic elements, extensive computer printouts, and other unusual materials that explain the project. With few exceptions...2630 Publications Branch Office 222/253 72379 S Publications Control Center 222/253 73508 Editorial 222/253 72782 Graphic Services 222/234 72756 73989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Environmental Engineering Committee conducted a preliminary review of the above document in March 1986, and identified obvious errors or omissions which are explained in detail in its initial report. The Office of Solid Waste asked the Committee to review the final draft ACL guidance when it was ready for publications in the Federal Register. This report represents the Committee's review of the final draft which was found to be well-written and technically sound.

The Role of Language and Literacy in College- and Career-Ready Standards: Rethinking Policy and Practice in Support of English Language Learners. Policy Brief

ERIC Educational Resources Information Center

Haynes, Mariana

2012-01-01

The Common Core State Standards spell out the sophisticated language competencies that students will need to perform in academic and technical subject areas. English language learners (ELLs) face a double challenge--they must learn grade-level content while simultaneously building their language proficiency. This policy brief discusses these…

Toward a "Common Definition of English Learner": A Brief Defining Policy and Technical Issues and Opportunities for State Assessment Consortia

ERIC Educational Resources Information Center

Linquanti, Robert; Cook, H. Gary

2013-01-01

The U.S. Department of Education (USED) requires states participating in either of the two Race to the Top assessment consortia (Smarter Balanced Assessment Consortium and Partnership for Assessment of Readiness for College and Careers [PARCC]), as well as those participating in either of the two Enhanced Assessment Grant (EAG) English language…

The Teacher Education and Development Study in Mathematics (TEDS-M): Policy, Practice, and Readiness to Teach Primary and Secondary Mathematics in 17 Countries. Technical Report

ERIC Educational Resources Information Center

Tatto, Maria Teresa, Ed.

2013-01-01

The Teacher Education and Development Study in Mathematics (TEDS-M), conducted under the aegis of the International Association for the Evaluation of Educational Achievement (IEA), was designed to inform policy and practice in mathematics teacher education. For educational policymakers, TEDS-M contributes data on institutional arrangements that…

ACT-CCREC Core Research Program: Study Questions and Design. ACT Working Paper Series. WP-2015-01

ERIC Educational Resources Information Center

Cruce, Ty M.

2015-01-01

This report provides a non-technical overview of the guiding research questions and research design for the ACT-led core research program conducted on behalf of the GEAR UP College and Career Readiness Evaluation Consortium (CCREC). The core research program is a longitudinal study of the effectiveness of 14 GEAR UP state grants on the academic…

SIMBIOS Project

NASA Technical Reports Server (NTRS)

Fargion, Giulietta S.; McClain, Charles R.

2002-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project. The SIMBIOS Science Team Principal Investigators' (PIs) original contributions to this report are in chapters four and above. The purpose of these contributions is to describe the current research status of the SIMBIOS-NRA-96 funded research. The contributions are published as submitted, with the exception of minor edits to correct obvious grammatical or clerical errors.

Integrated Display and Environmental Awareness System - System Architecture Definition

NASA Technical Reports Server (NTRS)

Doule, Ondrej; Miranda, David; Hochstadt, Jake

2017-01-01

The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

NASA Langley Systems Analysis & Concepts Directorate Technology Assessment/Portfolio Analysis

NASA Technical Reports Server (NTRS)

Cavanaugh, Stephen; Chytka, Trina; Arcara, Phil; Jones, Sharon; Stanley, Doug; Wilhite, Alan W.

2006-01-01

Systems analysis develops and documents candidate mission and architectures, associated system concepts, enabling capabilities and investment strategies to achieve NASA s strategic objectives. The technology assessment process connects the mission and architectures to the investment strategies. In order to successfully implement a technology assessment, there is a need to collect, manipulate, analyze, document, and disseminate technology-related information. Information must be collected and organized on the wide variety of potentially applicable technologies, including: previous research results, key technical parameters and characteristics, technology readiness levels, relationships to other technologies, costs, and potential barriers and risks. This information must be manipulated to facilitate planning and documentation. An assessment is included of the programmatic and technical risks associated with each technology task as well as potential risk mitigation plans. Risks are assessed and tracked in terms of likelihood of the risk occurring and consequences of the risk if it does occur. The risk assessments take into account cost, schedule, and technical risk dimensions. Assessment data must be simplified for presentation to decision makers. The Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center has a wealth of experience in performing Technology Assessment and Portfolio Analysis as this has been a business line since 1978.

Technical Readiness and Gaps Analysis of Commercial Optical Materials and Measurement Systems for Advanced Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anheier, Norman C.; Suter, Jonathan D.; Qiao, Hong

2013-08-06

This report intends to support Department of Energy’s Office of Nuclear Energy (DOE-NE) Nuclear Energy Research and Development Roadmap and industry stakeholders by evaluating optical-based instrumentation and control (I&C) concepts for advanced small modular reactor (AdvSMR) applications. These advanced designs will require innovative thinking in terms of engineering approaches, materials integration, and I&C concepts to realize their eventual viability and deployability. The primary goals of this report include: 1. Establish preliminary I&C needs, performance requirements, and possible gaps for AdvSMR designs based on best available published design data. 2. Document commercial off-the-shelf (COTS) optical sensors, components, and materials in termsmore » of their technical readiness to support essential AdvSMR in-vessel I&C systems. 3. Identify technology gaps by comparing the in-vessel monitoring requirements and environmental constraints to COTS optical sensor and materials performance specifications. 4. Outline a future research, development, and demonstration (RD&D) program plan that addresses these gaps and develops optical-based I&C systems that enhance the viability of future AdvSMR designs. The development of clean, affordable, safe, and proliferation-resistant nuclear power is a key goal that is documented in the Nuclear Energy Research and Development Roadmap. This roadmap outlines RD&D activities intended to overcome technical, economic, and other barriers, which currently limit advances in nuclear energy. These activities will ensure that nuclear energy remains a viable component to this nation’s energy security.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wassom, J.S.; Lu, P.Y.

Society today is faced with new health risk situations that have been brought about by recent scientific and technical advances. Federal and state governments are required to assess the many potential health risks to exposed populations from the products (chemicals) and by-products (pollutants) of these advances. Because a sound analysis of any potential health risk should be based on the use of relevant information, it behooves those individuals responsible for making the risk assessments to know where to obtain needed information. This paper reviews the origins of toxicology information systems and explores the specialized information center concept that was proposedmore » in 1963 as a means of providing ready access to scientific and technical information. As a means of illustrating this concept, the operation of one specialized information center (the Environmental Mutagen Information Center at Oak Ridge National Laboratory) will be discussed. Insights into how toxicological information resources came into being, their design and makeup, will be of value to those seeking to acquire information for risk assessment purposes. 7 refs., 1 fig., 4 tabs.« less

Making the Case for Reusable Booster Systems: The Operations Perspective

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2012-01-01

Presentation to the Aeronautics Space Engineering Board National Research Council Reusable Booster System: Review and Assessment Committee. Addresses: the criteria and assumptions used in the formulation of current RBS plans; the methodologies used in the current cost estimates for RBS; the modeling methodology used to frame the business case for an RBS capability including: the data used in the analysis, the models' robustness if new data become available, and the impact of unclassified government data that was previously unavailable and which will be supplied by the USAF; the technical maturity of key elements critical to RBS implementation and the ability of current technology development plans to meet technical readiness milestones.

Using the National Assessment of Educational Progress To Confirm State Test Results. A Report of the Ad Hoc Committee on Confirming Test Results.

ERIC Educational Resources Information Center

National Assessment Governing Board, Washington, DC.

The National Assessment Governing Board has recognized the need to study associated policy and technical issues to ensure that the National Assessment of Educational Progress (NAEP) is ready to do the best job possible if called on to confirm the results of state achievement testing under the No Child Left Behind Act. This report describes the…

Phase 1 of the automated array assembly task of the low cost silicon solar array project

NASA Technical Reports Server (NTRS)

Coleman, M. G.; Pryor, R. A.; Grenon, L. A.; Lesk, I. A.

1977-01-01

The state of technology readiness for the automated production of solar cells and modules is reviewed. Individual process steps and process sequences for making solar cells and modules were evaluated both technically and economically. High efficiency with a suggested cell goal of 15% was stressed. It is concluded that the technology exists to manufacture solar cells which will meet program goals.

Ready for Fall? Near-Term Effects of Voluntary Summer Learning Programs on Low-Income Students' Learning Opportunities and Outcomes. Technical Appendixes

ERIC Educational Resources Information Center

McCombs, Jennifer Sloan; Pane, John F.; Augustine, Catherine H.; Schwartz, Heather L.; Martorell, Paco; Zakaras, Laura

2014-01-01

Prior research has determined that low-income students lose more ground over the summer than their higher-income peers. Prior research has also shown that some summer learning programs can stem this loss, but we do not know whether large, district-run, voluntary programs can improve students' outcomes. To fill this gap, The Wallace Foundation…

Fiscal Year 2014 United States Army Corps of Engineers -Civil Works Annual Financial Report: Maintaining Readiness Through Fiscal Responsibility

DTIC Science & Technology

2014-01-01

modify previously authorized but unconstructed projects as needed to meet current science and engineering standards. Based on these completed...Everglades Planning Project feasibility report, which incorporates updated science and technical information gained over the last decade, was completed...report of the President’s Council of Advisors on Science and Technology on Sustaining Environmental Capital, recently formed a Biodiversity and Ecosystem

Low cost solar array project production process and equipment task. A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Technical readiness for the production of photovoltaic modules using single crystal silicon dendritic web sheet material is demonstrated by: (1) selection, design and implementation of solar cell and photovoltaic module process sequence in a Module Experimental Process System Development Unit; (2) demonstration runs; (3) passing of acceptance and qualification tests; and (4) achievement of a cost effective module.

KSC-2014-4217

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, helicopter crew chief Mark Smith, of URS Federal Technical Services Inc., checks out a Bambi Bucket prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Text processing for technical reports (direct computer-assisted origination, editing, and output of text)

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Volpi, A.; Fenrick, M. R.; Stanford, G. S.

1980-10-01

Documentation often is a primary residual of research and development. Because of this important role and because of the large amount of time consumed in generating technical reports, particularly those containing formulas and graphics, an existing data-processing computer system has been adapted so as to provide text-processing of technical documents. Emphasis has been on accuracy, turnaround time, and time savings for staff and secretaries, for the types of reports normally produced in the reactor development program. The computer-assisted text-processing system, called TXT, has been implemented to benefit primarily the originator of technical reports. The system is of particular value tomore » professional staff, such as scientists and engineers, who have responsibility for generating much correspondence or lengthy, complex reports or manuscripts - especially if prompt turnaround and high accuracy are required. It can produce text that contains special Greek or mathematical symbols. Written in FORTRAN and MACRO, the program TXT operates on a PDP-11 minicomputer under the RSX-11M multitask multiuser monitor. Peripheral hardware includes videoterminals, electrostatic printers, and magnetic disks. Either data- or word-processing tasks may be performed at the terminals. The repertoire of operations has been restricted so as to minimize user training and memory burden. Spectarial staff may be readily trained to make corrections from annotated copy. Some examples of camera-ready copy are provided.« less

Technical Feasibility Study for Zero Energy K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric

A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates requiredmore » a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.« less

NASA's Space Launch System Transitions From Design To Production

NASA Technical Reports Server (NTRS)

Askins, Bruce R.; Robinson, Kimberly F.

2016-01-01

NASA's Space Launch System (SLS) successfully completed its Critical Design Review (CDR) in 2015, a major milestone on the journey to an unprecedented era of exploration for humanity. CDR formally marked the program's transition from design to production phase just four years after the program's inception and the first such milestone for a human launch vehicle in 40 years. While challenges typical of a complex development program lie ahead, CDR evaluators concluded that the design is technically and programmatically sound and ready to press forward to Design Certification Review (DCR) and readiness for launch of Exploration Mission 1 (EM-1) in the 2018 timeframe. SLS is prudently based on existing propulsion systems, infrastructure and knowledge with a clear, evolutionary path as required by mission needs. In its initial configuration, designated Block 1, SLS will a minimum of 70 metric tons (t) (154,324 pounds) of payload to low Earth orbit (LEO). It will evolve to a 130 t (286,601 pound) payload capacity by upgrading its engines, boosters, and upper stage, dramatically increasing the mass and volume of human and robotic exploration while decreasing mission risk, increasing safety, and simplifying ground and mission operations. CDR was the central programmatic accomplishment among many technical accomplishments that will be described in this paper. The government/industry SLS team successfully test-fired a flight-like five-segment solid rocket motor, as well as seven hotfire development tests of the RS-25 core stage engine. The majority of the major test article and flight barrels, rings, and domes for the core stage liquid oxygen, liquid hydrogen, engine section, intertank, and forward skirt were manufactured at NASA's Michoud Assembly Facility in New Orleans, Louisiana. Renovations to the B-2 test stand for stage green run testing were completed at NASA's Stennis Space Center (SSC), near Bay St. Louis, Mississippi. Core stage test stands are reaching completion at NASA's Marshall Space Flight Center in Huntsville, Alabama. The modified Pegasus barge for core stage transportation from manufacturing to testing and launch sites was delivered to SSC. The Interim Cryogenic Propulsion System test article was also completed. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Automotive Stirling engine Market and Industrial Readiness Program (MIRP), phase 1

NASA Astrophysics Data System (ADS)

1982-05-01

A program, begun in 1978, has the goal of transferring Stirling engine technology from United Stirling of Sweden to the US and, then, following design, fabrication, and prototype testing, to secure US manufacturers for the engine. The ultimate objective is the large-scale commercial use of the Automotive Stirling Engine (ASE) by the year 2000. The fist phase of the Market and Industrial Readiness Program for the ASE was concerned with defining the market, product, economic and technical factors necessary to be addressed to assure a reasonable chance of ultimate commercial acceptance. Program results for this first phase are reported and discussed. These results pertain to licensing strategy development, economic analysis, market factors, product planning, market growth, cost studies, and engine performance as measured by fuel economy using conventional fuels and by vehicle speed and acceleration characteristics.

A Qualitative Readiness-Requirements Assessment Model for Enterprise Big-Data Infrastructure Investment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olama, Mohammed M; McNair, Wade; Sukumar, Sreenivas R

2014-01-01

In the last three decades, there has been an exponential growth in the area of information technology providing the information processing needs of data-driven businesses in government, science, and private industry in the form of capturing, staging, integrating, conveying, analyzing, and transferring data that will help knowledge workers and decision makers make sound business decisions. Data integration across enterprise warehouses is one of the most challenging steps in the big data analytics strategy. Several levels of data integration have been identified across enterprise warehouses: data accessibility, common data platform, and consolidated data model. Each level of integration has its ownmore » set of complexities that requires a certain amount of time, budget, and resources to implement. Such levels of integration are designed to address the technical challenges inherent in consolidating the disparate data sources. In this paper, we present a methodology based on industry best practices to measure the readiness of an organization and its data sets against the different levels of data integration. We introduce a new Integration Level Model (ILM) tool, which is used for quantifying an organization and data system s readiness to share data at a certain level of data integration. It is based largely on the established and accepted framework provided in the Data Management Association (DAMA-DMBOK). It comprises several key data management functions and supporting activities, together with several environmental elements that describe and apply to each function. The proposed model scores the maturity of a system s data governance processes and provides a pragmatic methodology for evaluating integration risks. The higher the computed scores, the better managed the source data system and the greater the likelihood that the data system can be brought in at a higher level of integration.« less

A qualitative readiness-requirements assessment model for enterprise big-data infrastructure investment

NASA Astrophysics Data System (ADS)

Olama, Mohammed M.; McNair, Allen W.; Sukumar, Sreenivas R.; Nutaro, James J.

2014-05-01

In the last three decades, there has been an exponential growth in the area of information technology providing the information processing needs of data-driven businesses in government, science, and private industry in the form of capturing, staging, integrating, conveying, analyzing, and transferring data that will help knowledge workers and decision makers make sound business decisions. Data integration across enterprise warehouses is one of the most challenging steps in the big data analytics strategy. Several levels of data integration have been identified across enterprise warehouses: data accessibility, common data platform, and consolidated data model. Each level of integration has its own set of complexities that requires a certain amount of time, budget, and resources to implement. Such levels of integration are designed to address the technical challenges inherent in consolidating the disparate data sources. In this paper, we present a methodology based on industry best practices to measure the readiness of an organization and its data sets against the different levels of data integration. We introduce a new Integration Level Model (ILM) tool, which is used for quantifying an organization and data system's readiness to share data at a certain level of data integration. It is based largely on the established and accepted framework provided in the Data Management Association (DAMADMBOK). It comprises several key data management functions and supporting activities, together with several environmental elements that describe and apply to each function. The proposed model scores the maturity of a system's data governance processes and provides a pragmatic methodology for evaluating integration risks. The higher the computed scores, the better managed the source data system and the greater the likelihood that the data system can be brought in at a higher level of integration.

Evaluation of Space Food for Commercial Astronauts

NASA Astrophysics Data System (ADS)

Ahlstrom, Britt Karin

As commercial aerospace companies advance toward manned spaceflight, they must overcome many hurdles - not only technical, but also human. One of the greatest human challenges they face is food. Throughout the history of human spaceflight, astronauts have primarily eaten food developed by government space agencies. Now, with manned commercial flights on the horizon, astronauts will be provided with an entirely new diet - one comprised of commercially available, ready-to-eat food. Yet will this diet keep astronauts nourished, satisfied with their diet, and both psychologically and physically healthy? The purpose of this parallel crossover design study was to evaluate (a) nutrient intake, (b) food satisfaction, (c) psychological health, and (d) physical health in commercial aerospace employees (N = 7) as they ate a diet of commercial, ready-to-eat food for four days, as compared to eating as normal for four days. Findings from this study showed that the ready-to-eat diet did not lead to any significant changes in caloric intake, psychological health, or physical health, aside from weight loss. It is not clear whether this weight loss was due to the loss of body fat, muscle, or water. When eating the ready-to-eat food, participants reported being slightly less satisfied with the variety, reported lower cravings for sweets, and reported the food was slightly less hedonically rewarding. In post-study interviews, participants reported they wanted to see more meats, fruits, vegetables, and desserts added to the ready-to-eat diet, so as to provide more meal-like structure. Overall, these findings show the diet could be used in commercial spaceflight after making simple changes. The diet could also be used by individuals in remote areas on Earth and to provide food assistance to individuals in disaster or emergency situations. Due to the increasing popularity of ready-to-eat food around the world, these findings also provide knowledge about the potential consequences of modern eating trends.

Mission Simulation Facility: Simulation Support for Autonomy Development

NASA Technical Reports Server (NTRS)

Pisanich, Greg; Plice, Laura; Neukom, Christian; Flueckiger, Lorenzo; Wagner, Michael

2003-01-01

The Mission Simulation Facility (MSF) supports research in autonomy technology for planetary exploration vehicles. Using HLA (High Level Architecture) across distributed computers, the MSF connects users autonomy algorithms with provided or third-party simulations of robotic vehicles and planetary surface environments, including onboard components and scientific instruments. Simulation fidelity is variable to meet changing needs as autonomy technology advances in Technical Readiness Level (TRL). A virtual robot operating in a virtual environment offers numerous advantages over actual hardware, including availability, simplicity, and risk mitigation. The MSF is in use by researchers at NASA Ames Research Center (ARC) and has demonstrated basic functionality. Continuing work will support the needs of a broader user base.

Objective assessment of technique in laparoscopic colorectal surgery: what are the existing tools?

PubMed

Foster, J D; Francis, N K

2015-01-01

Assessment can improve the effectiveness of surgical training and enable valid judgments of competence. Laparoscopic colon resection surgery is now taught within surgical residency programs, and assessment tools are increasingly used to stimulate formative feedback and enhance learning. Formal assessment of technical performance in laparoscopic colon resection has been successfully applied at the specialist level in the English "LAPCO" National Training Program. Objective assessment tools need to be developed for training and assessment in laparoscopic rectal cancer resection surgery. Simulation may have a future role in assessment and accreditation in laparoscopic colorectal surgery; however, existing virtual reality models are not ready to be used for assessment of this advanced surgery.

Reliability of mobile systems in construction

NASA Astrophysics Data System (ADS)

Narezhnaya, Tamara; Prykina, Larisa

2017-10-01

The purpose of the article is to analyze the influence of the mobility of construction production in the article taking into account the properties of reliability and readiness. Basing on the studied systems the effectiveness and efficiency is estimated. The construction system is considered to be the complete organizational structure providing creation or updating of construction facilities. At the same time the production sphere of these systems joins the production on the building site itself, material and technical resources of the construction production and live labour in these spheres within the construction dynamics. The author concludes, that the estimation of the degree of mobility of systems the of construction production makes a great positive effect in the project.

Study of the Technical Feasibility of Increasing the Amount of Recycled Concrete Waste Used in Ready-Mix Concrete Production

PubMed Central

Ferreiro-Cabello, Javier; López-González, Luis M.

2017-01-01

The construction industry generates a considerable amount of waste. Faced with this undesirable situation, the ready-mix concrete sector, in particular, has invested energy and resources into reusing its own waste in its production process as it works towards the goal of more sustainable construction. This study examines the feasibility of incorporating two types of concrete waste, which currently end up in landfill, into the production process of ready-mix concrete: the waste generated during the initial production stage (ready-mix concrete waste), and waste created when demolition waste is treated to obtain artificial aggregate. The first phase of the study’s methodology corroborates the suitability of the recycled aggregate through characterization tests. After this phase, the impact of incorporating different percentages of recycled coarse aggregate is evaluated by examining the performance of the produced concrete. The replacement rate varied between 15% and 50%. The results indicate that recycled aggregates are, indeed, suitable to be incorporated into ready-mix concrete production. The impact on the final product’s performance is different for the two cases examined herein. Incorporating aggregates from generic concrete blocks led to a 20% decrease in the produced concrete’s strength performance. On the other hand, using recycled aggregates made from the demolition waste led to a smaller decrease in the concrete’s performance: about 8%. The results indicate that with adequate management and prior treatment, the waste from these plants can be re-incorporated into their production processes. If concrete waste is re-used, concrete production, in general, becomes more sustainable for two reasons: less waste ends up as landfill and the consumption of natural aggregates is also reduced. PMID:28773183

Study of the Technical Feasibility of Increasing the Amount of Recycled Concrete Waste Used in Ready-Mix Concrete Production.

PubMed

Fraile-Garcia, Esteban; Ferreiro-Cabello, Javier; López-Ochoa, Luis M; López-González, Luis M

2017-07-18

The construction industry generates a considerable amount of waste. Faced with this undesirable situation, the ready-mix concrete sector, in particular, has invested energy and resources into reusing its own waste in its production process as it works towards the goal of more sustainable construction. This study examines the feasibility of incorporating two types of concrete waste, which currently end up in landfill, into the production process of ready-mix concrete: the waste generated during the initial production stage (ready-mix concrete waste), and waste created when demolition waste is treated to obtain artificial aggregate. The first phase of the study's methodology corroborates the suitability of the recycled aggregate through characterization tests. After this phase, the impact of incorporating different percentages of recycled coarse aggregate is evaluated by examining the performance of the produced concrete. The replacement rate varied between 15% and 50%. The results indicate that recycled aggregates are, indeed, suitable to be incorporated into ready-mix concrete production. The impact on the final product's performance is different for the two cases examined herein. Incorporating aggregates from generic concrete blocks led to a 20% decrease in the produced concrete's strength performance. On the other hand, using recycled aggregates made from the demolition waste led to a smaller decrease in the concrete's performance: about 8%. The results indicate that with adequate management and prior treatment, the waste from these plants can be re-incorporated into their production processes. If concrete waste is re-used, concrete production, in general, becomes more sustainable for two reasons: less waste ends up as landfill and the consumption of natural aggregates is also reduced.

Human Resource Information System implementation readiness in the Ethiopian health sector: a cross-sectional study.

PubMed

Dilu, Eyilachew; Gebreslassie, Measho; Kebede, Mihiretu

2017-12-20

Health workforce information systems in low-income countries tend to be defective with poor relationship to information sources. Human Resource Information System (HRIS) is currently in a pilot implementation phase in the Federal Ministry of Health and Regional Health Bureaus of Ethiopia. Before scaling up the implementation, it is important to understand the implementation readiness of hospitals and health departments. The aims of this study were to assess the readiness for HRIS implementation, identify associated factors, and explore the implementation challenges in public hospitals and health departments of the Amhara National Regional State, Ethiopia. An institution-based cross-sectional study supplemented with a qualitative study was conducted from the 15th of February to the 30th of March 2016 in 19 public hospitals and health departments of the Amhara National Regional State, Ethiopia. A self-administered questionnaire was used to collect the data. The questionnaire includes items on socio-demographic characteristics and questions measuring technical, personal, and organizational factors adapted from the 32-item questionnaire of the Management Science for Health (MSH) HRIS readiness assessment tool. The data were entered and analyzed with statistical software. Descriptive statistics and bivariate and multivariable logistic regression analyses were performed. Odds ratios with 95% confidence interval were computed to identify the factors statistically associated with readiness of HRIS implementation. In-depth interviews and observation checklists were used to collect qualitative data. Thematic content analysis was used to analyze the qualitative data. A total of 246 human resource (HR) employees and 16 key informants have been included in the study. The HR employee's level of readiness for HRIS implementation in this study was 35.8%. Employee's Internet access (AOR = 2.59, 95%CI = 1.19, 5.62), availability of separate HR section (AOR = 8.08, 95%CI = 3.69, 17.70), basic computer skills (AOR = 6.74, 95%CI = 2.75, 16.56), and fear of unemployment (AOR = 2.83, 95%CI = 1.27, 6.32) were associated with readiness of HRIS implementation. Poor logistic supply, lack of competency, poor commitment, and shortage of finance were the challenges of HRIS implementation. In this study, readiness of HRIS implementation was low. Strategies targeting to improve skills, awareness, and attitude of HR employees would facilitate the implementation process.

Organizational and Pedagogical Conditions for the Development of Professional Competencies in the Technical Students' Individual Work through the Example of Studying the Discipline "Hydraulics and Fluid Mechanics"

ERIC Educational Resources Information Center

Guseinova, Elena E.

2018-01-01

The urgency of the given problem is caused by the necessity to develop an innovative education system capable of producing highly qualified specialists with a wide range of social and professional activities and broad-based abilities ready for individual operating innovative activities. The article is intended to searching for the ways of…

Proceedings of the REAPS Technical Symposium (6th) Held in San Diego, California on September 11-13, 1979

DTIC Science & Technology

1979-09-01

of skilled workers . Recently, one yard was denied a contract by MarAd on the basis that a facility did not actually have a skilled...provide two medium -size diese l engines ins tead of the s ingle engine in the or ig inal des ign, Levingston contracted with IHI for on -site design... available information, which would reside on the computer ready for use

High spectral resolution lidar based on quad mach zehnder interferometer for aerosols and wind measurements on board space missions

NASA Astrophysics Data System (ADS)

Mariscal, Jean-François; Bruneau, Didier; Pelon, Jacques; Van Haecke, Mathilde; Blouzon, Frédéric; Montmessin, Franck; Chepfer, Hélène

2018-04-01

We present the measurement principle and the optical design of a Quad Mach Zehnder (QMZ) interferometer as HSRL technique, allowing simultaneous measurements of particle backscattering and wind velocity. Key features of this concept is to operate with a multimodal laser and do not require any frequency stabilization. These features are relevant especially for space applications for which high technical readiness level is required.

Distributed Networked Force Value Proposition Implications for Distributed Networked System Concept Development

DTIC Science & Technology

2008-08-18

Operations Concept Rules of engagement Reconnaissance, surveillance, and target acquisition Subject matter experts Technology readiness level Tactics...might call for the notification of an additional ASW platform, a pouncer, to reacquire, follow, and/or kill the transiter depending on the rules of...Naval Research Laboratory (E. Franchi , F. Erskine) 2 Naval Sea Systems Command (PEO-C4I and Space - D. Bauman, PEO-IWS - Technical Director, PEO-IWS5

Coal liquefaction processes and development requirements analysis for synthetic fuels production

NASA Technical Reports Server (NTRS)

1980-01-01

Focus of the study is on: (1) developing a technical and programmatic data base on direct and indirect liquefaction processes which have potential for commercialization during the 1980's and beyond, and (2) performing analyses to assess technology readiness and development trends, development requirements, commercial plant costs, and projected synthetic fuel costs. Numerous data sources and references were used as the basis for the analysis results and information presented.

High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-01-01

A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-03-01

A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

Getting Ready: The 2010-2011 Maryland School Readiness Report. Children Entering School Ready to Learn

ERIC Educational Resources Information Center

Maryland State Department of Education, 2011

2011-01-01

This report was developed in partnership with Ready At Five. It lays out the critical importance of children starting school fully prepared to succeed in kindergarten. Most importantly, the report shares what everyone has learned from the 2010-2011 Maryland Model for School Readiness (MMSR) data about the school readiness of Maryland's children:…

Design and Analysis of Modules for Segmented X-Ray Optics

NASA Technical Reports Server (NTRS)

McClelland, Ryan S.; BIskach, Michael P.; Chan, Kai-Wing; Saha, Timo T; Zhang, William W.

2012-01-01

Future X-ray astronomy missions demand thin, light, and closely packed optics which lend themselves to segmentation of the annular mirrors and, in turn, a modular approach to the mirror design. The modular approach to X-ray Flight Mirror Assembly (FMA) design allows excellent scalability of the mirror technology to support a variety of mission sizes and science objectives. This paper describes FMA designs using slumped glass mirror segments for several X-ray astrophysics missions studied by NASA and explores the driving requirements and subsequent verification tests necessary to qualify a slumped glass mirror module for space-flight. A rigorous testing program is outlined allowing Technical Development Modules to reach technical readiness for mission implementation while reducing mission cost and schedule risk.

KSC-2014-4219

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, Mike Tillema, chief of Flight Operations in the Operations Support Division of NASA Center Operations, center, discusses plans for a training session to practice use of a Bambi Bucket in honing firefighting techniques. Bill Martin, a URS Federal Technical Services pilot in NASA Flight Operations, is on the left, with crew chief Mark Smith, also of URS. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

SIMBIOS Project; 2003 Annual Report

NASA Technical Reports Server (NTRS)

McClain, Charles R.; Fargion, Giulietta S.

2003-01-01

The purpose of this technical report is to provide current documentation of the the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project. The SIMBIOS Science Team Principal Investigators (PIs) original contributions to this report are in chapters four and above. The purpose of these contributions is to describe the current research status of the SIMBIOS-NRA-99 funded research. The contributions are published as submitted, with the exception of minor edits to correct obvious grammatical or clerical errors.

Earned Value Management Considering Technical Readiness Level and Its Application to New Space Launcher Program

NASA Astrophysics Data System (ADS)

Choi, Young-In; Ahn, Jaemyung

2018-04-01

Earned value management (EVM) is a methodology for monitoring and controlling the performance of a project based on a comparison between planned and actual cost/schedule. This study proposes a concept of hybrid earned value management (H-EVM) that integrates the traditional EVM metrics with information on the technology readiness level. The proposed concept can reflect the progress of a project in a sensitive way and provides short-term perspective complementary to the traditional EVM metrics. A two-dimensional visualization on the cost/schedule status of a project reflecting both of the traditional EVM (long-term perspective) and the proposed H-EVM (short-term perspective) indices is introduced. A case study on the management of a new space launch vehicle development program is conducted to demonstrate the effectiveness of the proposed H-EVM concept, associated metrics, and the visualization technique.

KSC-2014-4220

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, John Miller of URS Federal Technical Services moves a Bambi Bucket and its associated cables are moved outside the Shuttle Landing Facility hangar prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Maturity Assessment of Space Plug-and-Play Architecture

DTIC Science & Technology

2013-03-01

SSM SPA Service Module SRL System Readiness Level TAT Time-at-Tone TRA Technology Readiness Assessment TRL Technology Readiness Level USB Universal...maturity assessment—the Technology Readiness Level (TRL) process, the Integration Readiness Level (IRL) process, and the System Readiness Level ( SRL ...is an important hallmark of the SPA concept, and makes possible the composability and scalability of system designs that employ it. 14 4. SPA

Review of NASA In-Space Propulsion Technology Program Inflatable Decelerator Investments

NASA Technical Reports Server (NTRS)

Richardson, E. H.; Mnk, M. M.; James, B. F.; Moon, S. A.

2005-01-01

The NASA In-Space Propulsion Technology (ISPT) Program is managed by the NASA Headquarters Science Mission Directorate and is implemented by the Marshall Space Flight Center in Huntsville, Alabama. The ISPT objective is to fund development of promising in-space propulsion technologies that can decrease flight times, decrease cost, or increase delivered payload mass for future science missions. Before ISPT will invest in a technology, the Technology Readiness Level (TRL) of the concept must be estimated to be at TRL 3. A TRL 3 signifies that the technical community agrees that the feasibility of the concept has been proven through experiment or analysis. One of the highest priority technology investments for ISPT is Aerocapture. The aerocapture maneuver uses a planetary atmosphere to reduce or alter the speed of a vehicle allowing for quick, propellantless (or using very little propellant) orbit capture. The atmosphere is used as a brake, transferring the energy associated with the vehicle's high speed into thermal energy. The ISPT Aerocapture Technology Area (ATA) is currently investing in the development of advanced lightweight ablative thermal protection systems, high temperature composite structures, and heat-flux sensors for rigid aeroshells. The heritage of rigid aeroshells extends back to the Apollo era and this technology will most likely be used by the first generation aerocapture vehicle. As a second generation aerocapture technology, ISPT is investing in three inflatable aerodynamic decelerator concepts for planetary aerocapture. They are: trailing ballute (balloon-parachute), attached afterbody ballute, and an inflatable aeroshell. ISPT also leverages the NASA Small Business Innovative Research Program for additional inflatable decelerator technology development. In mid-2004 ISPT requested an independent review of the three inflatable decelerator technologies funded directly by ISPT to validate the TRL and to identify technology maturation concerns. An independent panel with expertise in advanced thin film materials, aerothermodynamics, trajectory design, and inflatable structures was convened to assess the ISPT investments. The panel considered all major technical subsystems including materials, aerothermodynamics, structural dynamics, packaging, and inflation systems. The panel assessed the overall technology readiness of inflatable decelerators to be a 3 and identified fluid- structure interaction, aeroheating, and structural adhesives to be of highest technical concern.

Review of NASA In-Space Propulsion Technology Program Inflatable Decelerator Investments

NASA Technical Reports Server (NTRS)

Richardson, Erin H.; Munk, Michelle M.; James, Bonnie F.; Moon, Steve A.

2005-01-01

The NASA In-Space Propulsion Technology (ISPT) Program is managed by the NASA Headquarters Science Mission Directorate and is implemented by the Marshall Space Flight Center in Huntsville, Alabama. The ISPT objective is to fund development of promising in- space propulsion technologies that can decrease flight times, decrease cost, or increase delivered payload mass for future science missions. Before ISPT will invest in a technology, the Technology Readiness Level (TRL) of the concept must be estimated to be at TRL 3. A TRL 3 signifies that the technical community agrees that the feasibility of the concept has been proven through experiment or analysis. One of the highest priority technology investments for ISPT is Aerocapture. The aerocapture maneuver uses a planetary atmosphere to reduce or alter the speed of a vehicle allowing for quick, propellantless (or using very little propellant) orbit capture. The atmosphere is used as a brake, transferring the energy associated with the vehicle s high speed into thermal energy. The ISPT Aerocapture Technology Area (ATA) is currently investing in the development of advanced lightweight ablative thermal protection systems, high temperature composite structures, and heat-flux sensors for rigid aeroshells. The heritage of rigid aeroshells extends back to the Apollo era and this technology will most likely be used by the first generation aerocapture vehicle. As a second generation aerocapture technology, ISPT is investing in three inflatable aerodynamic decelerator concepts for planetary aerocapture. They are: trailing ballute (balloon-parachute), attached afterbody ballute, and an inflatable aeroshell. ISPT also leverages the NASA Small Business Innovative Research Program for additional inflatable decelerator technology development. In mid-2004 ISPT requested an independent review of the three inflatable decelerator technologies funded directly by ISPT to validate the TRL and to identify technology maturation concerns. An independent panel with expertise in advanced thin film materials, aerothermodynamics, trajectory design, and inflatable structures was convened to assess the ISPT investments. The panel considered all major technical subsystems including materials, aerothermodynamics, structural dynamics, packaging, and inflation systems. The panel assessed the overall technology readiness of inflatable decelerators to be a 3 and identified fluid-structure interaction, aeroheating, and structural adhesives to be of highest technical concern.

The quality of family planning services and client satisfaction in the public and private sectors in Kenya.

PubMed

Agha, Sohail; Do, Mai

2009-04-01

To compare the quality of family planning services delivered at public and private facilities in Kenya. Data from the 2004 Kenya Service Provision Assessment were analysed. The Kenya Service Provision Assessment is a representative sample of health facilities in the public and private sectors, and comprises data obtained from a facility inventory, service provider interviews, observations of client-provider interactions and exit interviews. Quality-of-care indicators are compared between the public and private sectors along three dimensions: structure, process and outcome. Private facilities were superior to public sector facilities in terms of physical infrastructure and the availability of services. Public sector facilities were more likely to have management systems in place. There was no difference between public and private providers in the technical quality of care provided. Private providers were better at managing interpersonal aspects of care. The higher level of client satisfaction at private facilities could not be explained by differences between public and private facilities in structural and process aspects of care. Formal private sector facilities providing family planning services exhibit greater readiness to provide services and greater attention to client needs than public sector facilities in Kenya. Consistent with this, client satisfaction is much higher at private facilities. Technical quality of care provided is similar in public and private facilities.

E-Learning Readiness in Medicine: Turkish Family Medicine (FM) Physicians Case

ERIC Educational Resources Information Center

Parlakkiliç, Alaattin

2015-01-01

This research investigates e-learning readiness level of family medicine physicians (FM) in Turkey. The study measures the level of e-learning readiness of Turkish FM physicians by an online e-learning readiness survey. According to results five areas are ready at Turkish FM physicians but need a few improvements:…

Photovoltaic system criteria documents. Volume 4: Review criteria for photovoltaic applications

NASA Technical Reports Server (NTRS)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

Guidelines are provided for the organization, preparation and conduct of program reviews for photovoltaic applications. These criteria apply to all photovoltaic applications. They include, but are not limited to, the following: (1) Conceptual design review; (2) Preliminary design review; (3) Critical design review; and (4) Operational readiness review. Contract goal's and objectives are met through program monitoring for cost, schedule, and performance for both managerial and technical elements for all PV applications activities.

Experimental and Analytic Evaluation of the Effects of Visual and Motion Simulation in SH-3 Helicopter Training. Technical Report 85-002.

ERIC Educational Resources Information Center

Pfeiffer, Mark G.; Scott, Paul G.

A fly-only group (N=16) of Navy replacement pilots undergoing fleet readiness training in the SH-3 helicopter was compared with groups pre-trained on Device 2F64C with: (1) visual only (N=13); (2) no visual/no motion (N=14); and (3) one visual plus motion group (N=19). Groups were compared for their SH-3 helicopter performance in the transition…

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1982-01-01

Restructuring research objectives from a technical readiness demonstration program to an investigation of high risk, high payoff activities associated with producing photovoltaic modules using non-CZ sheet material is reported. Deletion of the module frame in favor of a frameless design, and modification in cell series parallel electrical interconnect configuration are reviewed. A baseline process sequence was identified for the fabrication of modules using the selected dendritic web sheet material, and economic evaluations of the sequence were completed.

Evaluating Indicators and Life Cycle Inventories for Processes in Early Stages of Technical Readiness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Eric C; Smith, Raymond; Ruiz-Mercado, Gerardo

This presentation examines different methods for analyzing manufacturing processes in the early stages of technical readiness. Before developers know much detail about their processes, it is valuable to apply various assessments to evaluate their performance. One type of assessment evaluates performance indicators to describe how closely processes approach desirable objectives. Another type of assessment determines the life cycle inventories (LCI) of inputs and outputs for processes, where for a functional unit of product, the user evaluates the resources used and the releases to the environment. These results can be compared to similar processes or combined with the LCI of othermore » processes to examine up-and down-stream chemicals. The inventory also provides a listing of the up-stream chemicals, which permits study of the whole life cycle. Performance indicators are evaluated in this presentation with the U.S. Environmental Protection Agency's GREENSCOPE (Gauging Reaction Effectiveness for ENvironmental Sustainability with a multi-Objective Process Evaluator) methodology, which evaluates processes in four areas: Environment, Energy, Economics, and Efficiency. The method develops relative scores for indicators that allow comparisons across various technologies. In this contribution, two conversion pathways for producing cellulosic ethanol from biomass, via thermochemical and biochemical routes, are studied. The information developed from the indicators and LCI can be used to inform the process design and the potential life cycle effects of up- and down-stream chemicals.« less

Survey of reader preferences concerning the format of NASA technical reports

NASA Technical Reports Server (NTRS)

Pinelli, T. E.; Glassman, M.; Cordle, V. M.

1982-01-01

A survey was conducted to determine the opinions of readers concerning the format (organization) of NASA technical reports and usage of technical report components. A survey questionnaire was sent to 513 LaRC engineers and scientists and 600 engineers and scientists from three (3) professional/technical societies. The response rates were 74 and 85 percent, respectively. The questionnaire included the order in which users read report components, the components reviewed or read to determine whether to read a report, report components which could be deleted, the desirability of a table of contents, the desirability of both a summary and abstract, the location of the symbols list and glossary, the integration of illustrative material, the preferred format for reference citations, column layout and right margin treatment, and person/voice. The results of the reader preference survey indicated that the conclusion was the component most often ready by survey respondents. The summary, conclusion, abstract, title page, and introduction were the components used most frequently to determine if a report would actually be read. Respondents indicated that a summary as well as an abstract should be included, that the definition of symbols and glossary of terms should be located in the front of the report, and that illustrative material should be integrated with the text rather than grouped at the end of the report. Citation by number was the preferred format for references. A one-column, ragged right margin was preferred. Third person, passive voice was the style of writing preferred by the respondents.

REPORT OF ON-SITE INSPECTION WORKSHOP-16

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeney, J J

2009-07-07

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities formore » the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative maturity. By integrating such an assessment with considerations of integrated operational capabilities and the anticipated level of inspection team self-sufficiency and measurable milestone criteria, a set of priorities for OSI development can be developed. Once these priorities have been established, the Policy Making Organs can decide upon the milestones, strategic plan and action plan to serve as guidance for implementation by the Provisional Technical Secretariat. The suggested operational approach is as follows: (1) Assess the relative effectiveness (importance) of OSI elements versus their relative maturity; (2) Determine the anticipated level of self-sufficiency; (3) Define measurable milestone criteria; and (4) Result: Milestones for OSI readiness.« less

Genomic Epidemiology of Tuberculosis.

PubMed

Comas, Iñaki

2017-01-01

The application of next generation sequencing technologies has opened the door to a new molecular epidemiology of tuberculosis, in which we can now look at transmission at a resolution not possible before. At the same time, new technical and analytical challenges have appeared, and we are still exploring the wider potential of this new technology. Whole genome sequencing in tuberculosis still requires bacterial cultures. Thus, although whole genome sequencing has revolutionized the interpretation of transmission patterns, it is not yet ready to be applied at the point-of-care. In this chapter, I will review the promises and challenges of genomic epidemiology, as well as some of the new questions that have arisen from the use of this new technology. In addition, I will examine the role of molecular epidemiology within the general frame of global tuberculosis control and how genomic epidemiology can contribute towards the elimination of the disease.

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fourteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting January 1, 2004 and ending March 31, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale shakedown and performance testing, program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research (GEGR) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEGR (prime contractor) was awardedmore » a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GEGR, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on Aspen Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the third annual technical progress report for the UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2002 and ending September 30, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, bench-scale experimental testing, process modeling, pilot-scale system design and assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the thirteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL under Contract No. DE-FC26-00FT40974. This report summarizes program accomplishments for the period starting October 1, 2003 and ending December 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, pilot-scale demonstration and program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEmore » EER (prime contractor) was awarded a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE EER, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling work, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the tenth quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting January 1, 2003 and ending March 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision-21 program from U.S. DOE NETL tomore » develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the fifth quarterly technical progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2001 and ending December 31, 2001. The report includes an introduction summarizing the AGC concept, main program tasks, and program objectives; it also provides a summary of program activities covering program management and progress in tasks including lab- and bench-scale experimental testing, pilot-scale design, and economic studies.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program has determined the feasibility of the integrated UFP technology through pilot-scale testing, and investigated operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrated experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fifteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting April 1, 2004 and ending June 30, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale testing, kinetic modeling, program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision-21 program from U.S. DOE NETL tomore » develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the seventh quarterly technical progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting April 1, 2002 and ending June 30, 2002. The report includes an introduction summarizing the AGC concept, main program tasks, and program objectives; it also provides a summary of program activities covering program management and progress in tasks including lab-/bench-scale experimental testing and pilot-scale design.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. GE Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision 21 program from U.S. DOE NETL tomore » develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the second annual technical progress report for the Vision 21 AGC program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2001 and ending September 30, 2002. The report includes an introduction summarizing the AGC concept, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab- and bench-scale experimental testing, pilot-scale design and assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the thermodynamic efficiency and environmental impact performance of fossil fuel utilization. General Electric Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Advanced Gasification-Combustion (AGC) concept to produce H{sub 2} and sequestration-ready CO{sub 2} from solid fuels. The AGC module offers potential for reduced cost and increased energy efficiency relative to conventional gasification and combustion systems. GE EER was awarded a Vision-21 program from U.S. DOE NETL tomore » develop the AGC technology. Work on this three-year program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the AGC technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on preliminary modeling work in the first quarter of this program, has an estimated process efficiency of approximately 67% based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal. The three-year R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. This is the third quarterly technical progress report for the Vision-21 AGC program supported by U.S. DOE NETL (Contract: DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting April 1, 2001 and ending June 30, 2001. The report includes an introduction summarizing the AGC concept, main program tasks, objectives of this program, and provides a summary of program activities covering program management and progress in first year tasks including lab- and bench-scale design, facilities preparation, and engineering studies.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEmore » EER was awarded a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling work, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the ninth quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2002 and ending December 31, 2002. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab- and bench-scale experimental testing, pilot-scale design and assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research (GEGR) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEGR (prime contractor) was awardedmore » a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GEGR, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling with best-case scenario assumptions, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the eleventh quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting April 1, 2003 and ending June 30, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, and program management.« less

Robotic follower experimentation results: ready for FCS increment I

NASA Astrophysics Data System (ADS)

Jaczkowski, Jeffrey J.

2003-09-01

Robotics is a fundamental enabling technology required to meet the U.S. Army's vision to be a strategically responsive force capable of domination across the entire spectrum of conflict. The U. S. Army Research, Development and Engineering Command (RDECOM) Tank Automotive Research, Development & Engineering Center (TARDEC), in partnership with the U.S. Army Research Laboratory, is developing a leader-follower capability for Future Combat Systems. The Robotic Follower Advanced Technology Demonstration (ATD) utilizes a manned leader to provide a highlevel proofing of the follower's path, which operates with minimal user intervention. This paper will give a programmatic overview and discuss both the technical approach and operational experimentation results obtained during testing conducted at Ft. Bliss, New Mexico in February-March 2003.

KSC-07pd2863

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is ready to be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station ISS. Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

Iowa City Ready Mix, Inc.

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Iowa City Ready Mix, Inc., for alleged violations at a facility located at 1854 South Riverside, Iowa City, IA (“facility”). The facility produces and transports ready mixe

Streamlining and Standardizing Due Diligence to Ensure Quality of PV Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, Sarah

Those investing in PV power plants would like to have confidence that the plants will provide the anticipated return on investment. While due diligence is capably performed by independent engineers today, as PV systems mature, there will be benefit in standardization and streamlining of this process. The IECRE has defined technical information that is needed as a basis for each transaction step such as approving a design to begin construction, documenting readiness to operate, quantifying performance after a year of operation, and assessing the health of the plant in preparation for sale of the plant. The technical requirements have beenmore » defined by IEC Technical Committee 82 and have been designed to be both effective and efficient in completing the assessments. This workshop will describe these new tools that are now available to the community and will include a panel/audience discussion about how and when they can be most effectively used.« less

Support activities to maintain SUMS flight readiness

NASA Technical Reports Server (NTRS)

Wright, Willie

1992-01-01

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation System (STS). The experiment mission operation began about one hour prior to shuttle de-orbit entry maneuver and continued until reaching 1.6 torr (about 86 km altitude). The SUMS mass spectrometer consists of the spare unit from the Viking mission to Mars. Bendix Aerospace under contract to NASA LaRC incorporated the Viking mass spectrometer, a microprocessor based logic card, a pressurized instrument case, and the University of Texas at Dallas provided a gas inlet system into a configuration suited to interface with the shuttle Columbia. The SUMS experiment underwent static and dynamic calibration as well as vacuum maintenance before and after STS 40 shuttle flight. The SUMS flew a total of 3 times on the space shuttle Columbia. Between flights the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399.

DOE Office of Scientific and Technical Information (OSTI.GOV)

VANNONI, MICHAEL G.; BIRINGER, KENT L.; TROST, LAWRENCE C.

Missiles are attractive weapon systems because of their flexibility, survivability, and relatively low cost. Consequently, many nations are seeking to build missile forces resulting in regional arms races. Missile forces can be both stabilizing (e.g., providing a survivable force for deterrence) and destabilizing (e.g., creating strategic asymmetries). Efforts to control missile proliferation must account for these effects. A number of strategies to control the destabilizing effects of missiles were developed during the Cold War. Some of these strategies are applicable to regional missile control but new approaches, tailored to regional geographic and security conditions, are needed. Regional missile nonproliferation canmore » be pursued in a variety of ways: Reducing the demand for missiles by decreasing the perception of national threats; Restricting the export of missiles and associated equipment by supplier countries; Restricting information describing missile technology; Limiting missile development activities such as flight or engine tests; Restricting the operational deployment of existing missile forces; and Reducing existing missile forces by number and/or type. Even when development is complete, limits on deployment within range of potential targets or limits on operational readiness can help stabilize potential missile confrontations. Implementing these strategies often involves the collection and exchange of information about activities related to missile development or deployment. Monitoring is the process of collecting information used to for subsequent verification of commitments. A systematic approach to implementing verification is presented that identifies areas where monitoring could support missile nonproliferation agreements. The paper presents both non-technical and technical techniques for monitoring. Examples of non-technical techniques are declarations about planned test launches or on-site inspections. Examples of technical monitoring include remote monitoring (i.e., a sensor that is physically present at a facility) and remote sensing (i.e., a sensor that records activity without being physically present at a facility).« less

What schools are doing around career development: implications for policy and practice.

PubMed

Perry, Justin C; Wallace, Eric W

2012-01-01

This article describes the role that schools are playing in supporting career development for young people. It examines the history of career-related programming in schools, including school-to-work programs, career and technical education, the college and career readiness movement, and current school reform initiatives. This understanding of schools' history, roles, opportunities, and constraints can help practitioners and policymakers think about how to build a system that supports youth development. Copyright © 2012 Wiley Periodicals, Inc., A Wiley Company.

Heatshield for Extreme Entry Environment Technology (HEEET) for Missions to Saturn and Beyond

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Chinnapongse, R.; Fowler, M.; Gasch, M.; Hamm, K.; Kazemba, C.; Ma, J.; Milos, F.; Nishioka, O.;

Heatshield for Extreme Entry Environment Technology (HEEET) - Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzaes, G.;

Commissioning and first tests of the MAGIC telescope

NASA Astrophysics Data System (ADS)

Baixeras, C.; Bastieri, D.; Bigongiari, C.; Blanch, O.; Blanchot, G.; Bock, R.; Bretz, T.; Chilingarian, A.; Coarasa, J. A.; Colombo, E.; Contreras, J. C.; Corti, D.; Cortina, J.; Domingo, C.; Domingo, E.; Ferenc, D.; Fernández, E.; Flix, J.; Fonseca, V.; Font, L.; Galante, N.; Gaug, M.; Garczarczyk, M.; Gebauer, J.; Giller, M.; Goebel, F.; Hengstebeck, T.; Jacone, P.; de Jager, O. C.; Kalekin, O.; Kestel, M.; Kneiske, T.; Laille, A.; López, M.; López, J.; Lorenz, E.; Mannheim, K.; Mariotti, M.; Martínez, M.; Mase, K.; Merck, M.; Meucci, M.; Miralles, L.; Mirzoyan, R.; Moralejo, A.; Wilhelmi, E. Oña; Orduña, R.; Paneque, D.; Paoletti, R.; Pascoli, D.; Pavel, N.; Pegna, R.; Peruzzo, L.; Piccioli, A.; Roberts, A.; Reyes, R.; Saggion, A.; Sánchez, A.; Sartori, P.; Scalzotto, V.; Schweizer, T.; Sillanpaa, A.; Sobczynska, D.; Stamerra, A.; Stepanian, A.; Stiehler, R.; Takalo, L.; Teshima, M.; Tonello, N.; Torres, A.; Turini, N.; Vitale, V.; Volkov, S.; Wagner, R. M.; Wibig, T.; Wittek, W.

2004-02-01

Major Atmospheric Gamma Imaging Cherenkov telescope is starting its operations with a set of engineering runs to tune the telescope subsystem elements to be ready for the first physics campaign. Many technical improvements have been developed and implemented in several elements of the telescope to reach the lowest energy threshold ever obtained by an Imaging Atmospheric Cherenkov Telescope. A general description of the telescope is presented. The commissioning of the telescope's elements is described and the expected performances are reviewed with the final detector set-up.

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status for NF Missions

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Hamm, K.;

Energy Conversion Efficiency Potential for Forward-Deployed Generation Using Direct Carbon Fuel Cells

DTIC Science & Technology

2012-05-01

fuel cells vs. DCFCs. PEMFC PAFC MCFC SOFC DCFC Electrolyte Polymer Phosphoric acid Molten car- bonate salt Ceramic Fused KNO3 Operating...air O2/air CO2/O2/air O2/air Humidified air Efficiency (Higher Heating Value [HHV]) 30–35% 40–50% 50–60% 45–55% 80% PEMFC : Proton Exchange... PEMFC proton-exchange membrane fuel cell SOFC solid oxide fuel cell SRI Statistical Research, Inc. TR technical report TRL technology readiness level

Activities of the Space Studies Board

NASA Technical Reports Server (NTRS)

1994-01-01

Since its founding as the Space Science Board in 1958, the Space Studies Board has provided independent external scientific and technical advice on the nation's civil space program. This 1991 Annual Report of the SSB and its committees represents the first of its kind. The report contains a summary of the board's meetings, complete texts of letter reports, executive summaries of full reports issued during the year, and congressional testimony. It is intended to serve as a ready reference to board activities and advisory reports in 1991.

DoD Civilian Training: Source, Content, Frequency and Cost

DTIC Science & Technology

1994-03-01

Intelligence School Charleston, SC, and the Fire School will move to Fort Huachuca, AZ, from portion of the Naval Technical Training Fort Devens , MA...Recruiting & Retention School 2 10 Fort Bliss, TX Air Defense Artillery 2 I 11 Fort Devens , MA Army Intelligence School 4 12 Fort Eustis, VA Aviation...17457 4385 Gigllng Road- 8th Floor , Fort Ord, CA 93941-5800 94 6 8 07A’ The Assistant Secretary of Defense for Personnel and Readiness issued a tasker

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status

NASA Technical Reports Server (NTRS)

Ellerby, D.; Boghozian, T.; Driver, D.; Chavez-Garcia, J.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Kazemba, C.; Kellermann, C.;

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Jennifer B.; Biddy, Mary; Jones, Susanne

Twenty-four biomass-derived compounds and mixtures, identified based on their physical properties, which could be blended into fuels to improve spark ignition engine fuel economy, were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall economic and, to some extent, environmental viability is driven by projected yields for each of these processes. The metrics used in this analysismore » methodology highlight the near-term potential to achieve these targeted yield estimates when considering data quality and current technical readiness for these conversion strategies. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blending behavior of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Altogether, the technology to produce many of these blendstocks from biomass is emerging, and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors, in addition to physical properties of blendstocks that could be used to boost engine efficiency and fuel economy, in the early stages of project research and development can help spotlight those most likely to be viable in the near term.« less

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

DOE PAGES

Dunn, Jennifer B.; Biddy, Mary; Jones, Susanne; ...

2017-10-30

Twenty-four biomass-derived compounds and mixtures, identified based on their physical properties, which could be blended into fuels to improve spark ignition engine fuel economy, were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall economic and, to some extent, environmental viability is driven by projected yields for each of these processes. The metrics used in this analysismore » methodology highlight the near-term potential to achieve these targeted yield estimates when considering data quality and current technical readiness for these conversion strategies. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blending behavior of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Altogether, the technology to produce many of these blendstocks from biomass is emerging, and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors, in addition to physical properties of blendstocks that could be used to boost engine efficiency and fuel economy, in the early stages of project research and development can help spotlight those most likely to be viable in the near term.« less

Hatch Integration Testing of a NASA TransHab Derivative Woven Inflatable Module

NASA Technical Reports Server (NTRS)

Edgecombe, John; Valle, Gerald

2009-01-01

Current options for Lunar habitat architecture include inflatable habitats and airlocks. Inflatable structures can have mass and volume advantages over conventional structures. However, inflatable structures are also perceived to carry additional risk because they are at a lower Technical Readiness Level (TRL) than more conventional metallic structures. The use of inflatable structures for habitation will require large penetrations in the inflatable structure to accommodate hatches and/or windows The Hatch Integration Test is designed to study the structural integrity of an expandable structure with an integrated hatch, and to verify mathematical models of the structure. The TransHab project developed an experimental inflatable module at Johnson Space Center in the 1990's. The TransHab design was originally envisioned for use in Mars Transits but was also studied as a potential habitat for the International Space Station (ISS).

The Center for Aerospace Research: A NASA Center of Excellence at North Carolina Agricultural and Technical State University

NASA Technical Reports Server (NTRS)

Lai, Steven H.-Y.

1992-01-01

This report documents the efforts and outcomes of our research and educational programs at NASA-CORE in NCA&TSU. The goal of the center was to establish a quality aerospace research base and to develop an educational program to increase the participation of minority faculty and students in the areas of aerospace engineering. The major accomplishments of this center in the first year are summarized in terms of three different areas, namely, the center's research programs area, the center's educational programs area, and the center's management area. In the center's research programs area, we focus on developing capabilities needed to support the development of the aerospace plane and high speed civil transportation system technologies. In the educational programs area, we developed an aerospace engineering option program ready for university approval.

Stacked, Filtered Multi-Channel X-Ray Diode Array

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacNeil, Lawrence P.; Dutra, Eric C.; Raphaelian, Mark

2015-08-01

This system meets the need for a low-cost, robust X-ray diode array to use for experiments in hostile environments on multiple platforms, and for experiments utilizing forces that may destroy the diode(s). Since these uses require a small size with a minimal single line-of-sight, a parallel array often cannot be used. So a stacked, filtered multi-channel X-ray diode array was developed that was called the MiniXRD. The design was modeled, built, and tested at National Security Technologies, LLC (NSTec) Livermore Operations (LO) to determine fundamental characteristics. Then, several different systems were fielded as ancillary “ridealong” diagnostics at several national facilitiesmore » to allow us to iteratively improve the design and usability. Presented here are design considerations and experimental results. This filtered diode array is currently at Technical Readiness Level (TRL) 6.« less

MAPIR: An Airborne Polarmetric Imaging Radiometer in Support of Hydrologic Satellite Observations

NASA Technical Reports Server (NTRS)

Laymon, C.; Al-Hamdan, M.; Crosson, W.; Limaye, A.; McCracken, J.; Meyer, P.; Richeson, J.; Sims, W.; Srinivasan, K.; Varnevas, K.

2010-01-01

In this age of dwindling water resources and increasing demands, accurate estimation of water balance components at every scale is more critical to end users than ever before. Several near-term Earth science satellite missions are aimed at global hydrologic observations. The Marshall Airborne Polarimetric Imaging Radiometer (MAPIR) is a dual beam, dual angle polarimetric, scanning L band passive microwave radiometer system developed by the Observing Microwave Emissions for Geophysical Applications (OMEGA) team at MSFC to support algorithm development and validation efforts in support of these missions. MAPIR observes naturally-emitted radiation from the ground primarily for remote sensing of land surface brightness temperature from which we can retrieve soil moisture and possibly surface or water temperature and ocean salinity. MAPIR has achieved Technical Readiness Level 6 with flight heritage on two very different aircraft, the NASA P-3B, and a Piper Navajo.

Deep Space Test Bed for Radiation Studies

NASA Technical Reports Server (NTRS)

Adams, James H.; Christl, Mark; Watts, John; Kuznetsov, Eugene; Lin, Zi-Wei

2006-01-01

A key factor affecting the technical feasibility and cost of missions to Mars or the Moon is the need to protect the crew from ionizing radiation in space. Some analyses indicate that large amounts of spacecraft shielding may be necessary for crew safety. The shielding requirements are driven by the need to protect the crew from Galactic cosmic rays (GCR). Recent research activities aimed at enabling manned exploration have included shielding materials studies. A major goal of this research is to develop accurate radiation transport codes to calculate the shielding effectiveness of materials and to develop effective shielding strategies for spacecraft design. Validation of these models and calculations must be addressed in a relevant radiation environment to assure their technical readiness and accuracy. Test data obtained in the deep space radiation environment can provide definitive benchmarks and yield uncertainty estimates of the radiation transport codes. The two approaches presently used for code validation are ground based testing at particle accelerators and flight tests in high-inclination low-earth orbits provided by the shuttle, free-flyer platforms, or polar-orbiting satellites. These approaches have limitations in addressing all the radiation-shielding issues of deep space missions in both technical and practical areas. An approach based on long duration high altitude polar balloon flights provides exposure to the galactic cosmic ray composition and spectra encountered in deep space at a lower cost and with easier and more frequent access than afforded with spaceflight opportunities. This approach also results in shorter development times than spaceflight experiments, which is important for addressing changing program goals and requirements.

Assessing the School Readiness of Children in Jordan.

PubMed

Al-Hassan, Suha M; Lansford, Jennifer E

2009-01-01

In 2003, Jordan initiated a period of education reform, one component of which was an effort to improve readiness for first grade by opening public kindergartens. This study had three goals: (a) To describe the school readiness of Jordanian children; (b) To compare the first grade readiness of children who had and had not attended kindergarten; and (c) To compare the 2004 and 2007 readiness of children in areas that instituted kindergartens during that time period. Trained observers directly assessed 4,681 children's readiness, and teachers reported on children's social skills and behavioral readiness. At least 80% of children were rated as being almost or fully ready for first grade in each domain assessed. Children who had attended kindergarten were more ready for first grade than were children who had not attended kindergarten. In communities with newly established kindergartens, children were more ready for first grade in 2007 than in 2004.

Iowa City Ready Mix, Inc. - Clean Water Act Public Notice

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Iowa City Ready Mix, Inc., for alleged violations at a facility located at 1854 South Riverside, Iowa City, IA (“facility”). The facility produces and transports ready mixe

The Condition of College & Career Readiness 2016: Oregon Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Oregon: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Minnesota Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Minnesota: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Virginia Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Virginia: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

Neuroscience Perspectives on Disparities in School Readiness and Cognitive Achievement

ERIC Educational Resources Information Center

Noble, Kimberly G.; Tottenham, Nim; Casey, B. J.

2005-01-01

This article allows readers to look at racial and ethnic disparities in school readiness from a neuroscience perspective. Although researchers have traditionally measured gaps in school readiness using broad achievement tests, they can now assess readiness in terms of more specific brain-based cognitive functions. Three neurocognitive…

The Condition of College & Career Readiness 2016: Pennsylvania Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Pennsylvania: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

The Condition of College & Career Readiness 2016: Michigan Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Michigan: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Idaho Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Idaho: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline, and…

The Condition of College & Career Readiness 2016: Hawaii Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Hawaii: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Wisconsin Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Wisconsin: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

Why so few young women in mathematics, science, and technology classes?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wieda, K.J.

Many factors influence the success of women in scientific and technical careers. Women represent over 50% of the U.S. population, yet less than 16% of women are employed in scientific and technical careers. Research over the last decade makes it clear that disparities exist in the participation, achievement, and attitudes of young men and young women in science classes. Young women are as interested in science experiences as young men up until age nine. After that age, the number of young women interested in science, mathematics, and technology classes drops. Not enrolling in science and mathematics classes in high schoolmore » limits career options for young women, and their chance to succeed in a scientific or technical field becomes remote. Why is this happening? What can we, as educators, scientists, and parents do to address this problem? The literature identifies three principal factors that relate to the lack of female involvement in science classes: culture, attitude, and education. This paper reviews these factors and provides examples of programs that Pacific Northwest Laboratory (PNL) and others have developed to increase the number of young women entering college ready and wanting to pursue a career in a scientific or technical field.« less

The Condition of College & Career Readiness 2016: New York Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New York: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: West Virginia Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for West Virginia: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

ERIC Educational Resources Information Center

Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

2014-01-01

The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

Thoughts on a Multidimensional Middle School Index of College Readiness

ERIC Educational Resources Information Center

Mattern, Krista; Allen, Jeff; Camara, Wayne

2016-01-01

The findings of the Gaertner and McClarty article (2015) raised awareness on two extremely important topics related to college readiness: First, to effect change, we must measure students' progression towards college readiness throughout their K-12 career rather than just at the culmination of high school. Second, college readiness encompasses…

The Condition of College & Career Readiness 2016: New Hampshire Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New Hampshire: performance, STEM, career readiness, behaviors that impact access and opportunity, pipeline, and…

The Condition of College & Career Readiness 2016: New Mexico Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New Mexico: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

READINESS AND READING FOR THE RETARDED CHILD.

ERIC Educational Resources Information Center

BERNSTEIN, BEBE

THIS TEACHER'S BOOK AND MANUAL, DESIGNED TO ACCOMPANY TWO WORKBOOKS, PRESENTS A FUNCTIONAL APPROACH TO READINESS AND READING FOR YOUNG EDUCABLE RETARDED CHILDREN. THE WORKBOOKS THEMSELVES OFFER PREPARATORY ACTIVITIES FOR CHILDREN AT THE READINESS LEVEL AND SEQUENTIAL ACTIVITIES AND MATERIALS FOR THOSE AT THE BEGINNING READING STAGE. THE TEACHER'S…

The Framework Convention on Tobacco Control (FCTC) and the adoption of domestic tobacco control policies: the Ecuadorian experience.

PubMed

Albuja, S; Daynard, R A

2009-02-01

The present work concerns the adoption of domestic tobacco control legislation in Ecuador after ratification of the World Health Organization (WHO) Framework Convention on Tobacco Control (FCTC). Analysis of legislation, and data collection via interviews with key actors involved in the adoption and implementation of domestic legislation passed purportedly to implement the FCTC and research of the Ecuadorian Congressional Archives. While the FCTC helped raise awareness about tobacco's imminent and future threats to public health, paradoxically, it had the effect of further entrenching tobacco-friendly norms. Philip Morris, with 87% dominance over the Ecuadorian tobacco market, subtly harnessed the FCTC to protect its interests. This outcome was also influenced by poor governmental readiness and intervention, lack of legislative technical capabilities and weak civil society involvement. The Ecuadorian experience suggests that more support should be provided to health ministries, legislatures and local tobacco control organisations to offset the power of the tobacco industry as developing nations get ready to adopt domestic tobacco control legislation.

Space station propulsion test bed

NASA Technical Reports Server (NTRS)

Briley, G. L.; Evans, S. A.

1989-01-01

A test bed was fabricated to demonstrate hydrogen/oxygen propulsion technology readiness for the intital operating configuration (IOC) space station application. The test bed propulsion module and computer control system were delivered in December 1985, but activation was delayed until mid-1986 while the propulsion system baseline for the station was reexamined. A new baseline was selected with hydrogen/oxygen thruster modules supplied with gas produced by electrolysis of waste water from the space shuttle and space station. As a result, an electrolysis module was designed, fabricated, and added to the test bed to provide an end-to-end simulation of the baseline system. Subsequent testing of the test bed propulsion and electrolysis modules provided an end-to-end demonstration of the complete space station propulsion system, including thruster hot firings using the oxygen and hydrogen generated from electrolysis of water. Complete autonomous control and operation of all test bed components by the microprocessor control system designed and delivered during the program was demonstrated. The technical readiness of the system is now firmly established.

Fly-by-light flight control system technology development plan

NASA Technical Reports Server (NTRS)

Chakravarty, A.; Berwick, J. W.; Griffith, D. M.; Marston, S. E.; Norton, R. L.

1990-01-01

The results of a four-month, phased effort to develop a Fly-by-Light Technology Development Plan are documented. The technical shortfalls for each phase were identified and a development plan to bridge the technical gap was developed. The production configuration was defined for a 757-type airplane, but it is suggested that the demonstration flight be conducted on the NASA Transport Systems Research Vehicle. The modifications required and verification and validation issues are delineated in this report. A detailed schedule for the phased introduction of fly-by-light system components has been generated. It is concluded that a fiber-optics program would contribute significantly toward developing the required state of readiness that will make a fly-by-light control system not only cost effective but reliable without mitigating the weight and high-energy radio frequency related benefits.

Going digital: a checklist in preparing for hospital-wide electronic medical record implementation and digital transformation.

PubMed

Scott, Ian A; Sullivan, Clair; Staib, Andrew

2018-05-24

Objective In an era of rapid digitisation of Australian hospitals, practical guidance is needed in how to successfully implement electronic medical records (EMRs) as both a technical innovation and a major transformative change in clinical care. The aim of the present study was to develop a checklist that clearly and comprehensively defines the steps that best prepare hospitals for EMR implementation and digital transformation. Methods The checklist was developed using a formal methodological framework comprised of: literature reviews of relevant issues; an interactive workshop involving a multidisciplinary group of digital leads from Queensland hospitals; a draft document based on literature and workshop proceedings; and a review and feedback from senior clinical leads. Results The final checklist comprised 19 questions, 13 related to EMR implementation and six to digital transformation. Questions related to the former included organisational considerations (leadership, governance, change leaders, implementation plan), technical considerations (vendor choice, information technology and project management teams, system and hardware alignment with clinician workflows, interoperability with legacy systems) and training (user training, post-go-live contingency plans, roll-out sequence, staff support at point of care). Questions related to digital transformation included cultural considerations (clinically focused vision statement and communication strategy, readiness for change surveys), management of digital disruption syndromes and plans for further improvement in patient care (post-go-live optimisation of digital system, quality and benefit evaluation, ongoing digital innovation). Conclusion This evidence-based, field-tested checklist provides guidance to hospitals planning EMR implementation and separates readiness for EMR from readiness for digital transformation. What is known about the topic? Many hospitals throughout Australia have implemented, or are planning to implement, hospital wide electronic medical records (EMRs) with varying degrees of functionality. Few hospitals have implemented a complete end-to-end digital system with the ability to bring about major transformation in clinical care. Although the many challenges in implementing EMRs have been well documented, they have not been incorporated into an evidence-based, field-tested checklist that can practically assist hospitals in preparing for EMR implementation as both a technical innovation and a vehicle for major digital transformation of care. What does this paper add? This paper outlines a 19-question checklist that was developed using a formal methodological framework comprising literature review of relevant issues, proceedings from an interactive workshop involving a multidisciplinary group of digital leads from hospitals throughout Queensland, including three hospitals undertaking EMR implementation and one hospital with complete end-to-end EMR, and review of a draft checklist by senior clinical leads within a statewide digital healthcare improvement network. The checklist distinguishes between issues pertaining to EMR as a technical innovation and EMR as a vehicle for digital transformation of patient care. What are the implications for practitioners? Successful implementation of a hospital-wide EMR requires senior managers, clinical leads, information technology teams and project management teams to fully address key operational and strategic issues. Using an issues checklist may help prevent any one issue being inadvertently overlooked or underemphasised in the planning and implementation stages, and ensure the EMR is fully adopted and optimally used by clinician users in an ongoing digital transformation of care.

Soldier Quality of Life (Operational) and Readiness at Contingency Base Camps: Insights From Qualitative Interviews

DTIC Science & Technology

2017-03-13

camps and Soldier/small unit readiness to guide the development of a quantitative readiness survey . • During structured interviews, 31 Soldiers...camps and Soldier/small unit readiness to guide the development of a quantitative readiness survey . 11UNCLASSIFIED Click to hear quote Methods...We were rock stars.” 60UNCLASSIFIED • These data are driving the selection of attributes for a future quantitative survey of the link between QoL

SaludABLEOmaha: improving readiness to address obesity through healthy lifestyle in a Midwestern Latino community, 2011-2013.

PubMed

Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher; Huang, Terry T-K

2015-02-12

A community's readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. The community increased in readiness from stage 3 of the Community Readiness Model, "vague awareness," at baseline to stage 5, "preparation," at follow-up. SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities.

Enhancing professionalism among engineering students through involvements in technical societies.

PubMed

Ghosh, Sreejita; Samineni, Anvesh; Mandal, Subhamoy; Murari, Bhaskar Mohan

2015-08-01

A student chapter can be considered to be a miniature enterprise; however without the latter's major financial risks. Involvement in the student chapter of a professional society like IEEE at undergraduate level plays a pivotal role in the overall professional development of the student by keeping the students informed about the various career possibilities. A student chapter shapes the hitherto naive students into industry ready professionals and to suitable candidates for some of the best grad schools worldwide. This assertion has been discussed in-depth taking the example of IEEE EMBS Student Branch chapter of VIT University. It has been described how the entire process, - starting from inception of an idea to its materialization in to an activity, has shaped the volunteers and participants into better professionals.

Creative Practice : Design and Manufacturing of ‘CD Crusher’

NASA Astrophysics Data System (ADS)

Yamamoto, Koji; Senda, Shinkoh; Fukumori, Tsutom; Sato, Kazuo

A practice program for graduate students in mechanical engineering has been developed. The task of this training is to design and manufacture an original ‘CD crusher’ , a machine to mechanically destroy compact disks after use. This is a competition among groups of students creating their original CD crusher which fulfills the regulation. The regulation is that the crusher has to use rotational blades cutting the CDs. Same sized blades are supplied to the students groups. They are fabricated from a steel bar through cutting, annealing and quenching processes by the presence of students. Technical staffs are ready to help students on the whole way of the practice. However, they encourage initiative by the students from planning to manufacturing. Students satisfied at the practice according to the comments after competition.

The future of automotive lithium-ion battery recycling: Charting a sustainable course

DOE PAGES

Gaines, Linda

2014-12-01

This paper looks ahead, beyond the projected large-scale market penetration of vehicles containing advanced batteries, to the time when the spent batteries will be ready for final disposition. It describes a working system for recycling, using lead–acid battery recycling as a model. Recycling of automotive lithium-ion (Li-ion) batteries is more complicated and not yet established because few end-of-life batteries will need recycling for another decade. There is thus the opportunity now to obviate some of the technical, economic, and institutional roadblocks that might arise. The paper considers what actions can be started now to avoid the impediments to recycling andmore » ensure that economical and sustainable options are available at the end of the batteries' useful life.« less

CHARM: A CubeSat Water Vapor Radiometer for Earth Science

NASA Technical Reports Server (NTRS)

Lim, Boon; Mauro, David; DeRosee, Rodolphe; Sorgenfrei, Matthew; Vance, Steve

2012-01-01

The Jet Propulsion Laboratory (JPL) and Ames Research Center (ARC) are partnering in the CubeSat Hydrometric Atmospheric Radiometer Mission (CHARM), a water vapor radiometer integrated on a 3U CubeSat platform, selected for implementation under NASA Hands-On Project Experience (HOPE-3). CHARM will measure 4 channels at 183 GHz water vapor line, subsets of measurements currently performed by larger and more costly spacecraft (e.g. ATMS, AMSU-B and SSMI/S). While flying a payload that supports SMD science objectives, CHARM provides a hands-on opportunity to develop technical, leadership, and project skills. CHARM will furthermore advance the technology readiness level (TRL) of the 183 GHz receiver subsystem from TRL 4 to TRL 6 and the CubeSat 183 GHz radiometer system from TRL 4 to TRL 7.

Industrial 2-kW TEA CO2 laser for paint stripping of aircraft

NASA Astrophysics Data System (ADS)

Schweizer, Gerhard; Werner, L.

1995-03-01

Paint stripping of aircraft with pulsed laser radiation has several advantages compared to traditional methods of depainting: selective removal of individual layers possible, suitable for sensitive surfaces, workpiece ready for immediate repainting, and considerable reduction of contaminated waste. For paint stripping of large aircraft pulsed lasers with average power of at least 2 kW are required. Amongst the various types of pulsed lasers technical and economical considerations clearly favor TEA CO2 lasers for this application. The first commercially available TEA CO2 laser with an average power in excess of 2 kW, especially designed for depainting, has been developed by Urenco. The key data of this laser are: pulse energy up to 9 J, repetition rate up to 330 Hz, and beam quality: `flat top'.

The future of automotive lithium-ion battery recycling: Charting a sustainable course

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaines, Linda

This paper looks ahead, beyond the projected large-scale market penetration of vehicles containing advanced batteries, to the time when the spent batteries will be ready for final disposition. It describes a working system for recycling, using lead–acid battery recycling as a model. Recycling of automotive lithium-ion (Li-ion) batteries is more complicated and not yet established because few end-of-life batteries will need recycling for another decade. There is thus the opportunity now to obviate some of the technical, economic, and institutional roadblocks that might arise. The paper considers what actions can be started now to avoid the impediments to recycling andmore » ensure that economical and sustainable options are available at the end of the batteries' useful life.« less

Report from the Gravitational Observatory Advisory Team

NASA Astrophysics Data System (ADS)

Mueller, Guido; Gravitational Observatory Advisory Team

2016-03-01

As a response to the selection of the Gravitational Universe as the science theme for ESA's L3 mission, ESA formed the Gravitational-Wave Observatory Advisory Team (GOAT) to advise ESA on the scientific and technological approach for a gravitational wave observatory. NASA is participating with three US scientists and one NASA observer; JAXA was also invited and participates with one observer. The GOAT looked at a range of mission technologies and designs, discussed their technical readiness with respect to the ESA schedule, recommended technology development activities for selected technologies, and worked with the wider gravitational-wave community to analyze the impact on the science of the various mission designs. The final report is expected to be submitted to ESA early March and I plan to summarize its content.

A framework for community ownership of a text messaging programme to improve adherence to antiretroviral therapy and client-provider communication: a mixed methods study.

PubMed

Mbuagbaw, Lawrence; Bonono-Momnougui, Renee-Cecile; Thabane, Lehana; Kouanfack, Charles; Smieja, Marek; Ongolo-Zogo, Pierre

2014-09-26

Mobile phone text messaging has been shown to improve adherence to antiretroviral therapy and to improve communication between patients and health care workers. It is unclear which strategies are most appropriate for scaling up text messaging programmes. We sought to investigate acceptability and readiness for ownership (community members designing, sending and receiving text messages) of a text message programme among a community of clients living with human immunodeficiency virus (HIV) in Yaoundé, Cameroon and to develop a framework for implementation. We used the mixed-methods sequential exploratory design. In the qualitative strand we conducted 7 focus group discussions (57 participants) to elicit themes related to acceptability and readiness. In the quantitative strand we explored the generalizability of these themes in a survey of 420 clients. Qualitative and quantitative data were merged to generate meta-inferences. Both qualitative and quantitative strands showed high levels of acceptability and readiness despite low rates of participation in other community-led projects. In the qualitative strand, compared to the quantitative strand, more potential service users were willing to pay for a text messaging service, preferred participation of health personnel in managing the project and preferred that the project be based in the hospital rather than in the community. Some of the limitations identified to implementing a community-owned project were lack of management skills in the community, financial, technical and literacy challenges. Participants who were willing to pay were more likely to find the project acceptable and expressed positive feelings about community readiness to own a text messaging project. Community ownership of a text messaging programme is acceptable to the community of clients at the Yaoundé Central Hospital. Our framework for implementation includes components for community members who take on roles as services users (demonstrating clear benefits, allowing a trial period and ensuring high levels of confidentiality) or service providers (training in project management and securing sustainable funding). Such a project can be evaluated using participation rate, clinical outcomes, satisfaction with the service, cost and feedback from users.

The Kindergarten Academic and Behavior Readiness Screener: The Utility of Single-Item Teacher Ratings of Kindergarten Readiness

ERIC Educational Resources Information Center

Stormont, Melissa; Herman, Keith C.; Reinke, Wendy M.; King, Kathleen R.; Owens, Sarah

2015-01-01

The purpose of the study was to explore the effectiveness of a brief, feasible, and cost-effective universal screener for kindergarten readiness. The study examined whether teacher ratings of kindergarteners' academic, behavioral, and overall readiness at the beginning of the year were predictive of academic, emotional, and behavioral outcomes at…

An Investigation of Selected Readiness Variables As Predictors of Reading Achievement at Second Grade Level.

ERIC Educational Resources Information Center

Seals, Caryl Neman

This study was designed to determine the relationship of selected readiness variables to achievement in reading at the second grade level. The readiness variables were environment, mathematics, letters and sounds, aural comprehension, visual perception, auditory perception, vocabulary and concepts, word meaning, listening, matching, alphabet,…

Self-Directed Learning Readiness among Undergraduate Students at Saudi Electronic University in Saudi Arabia

ERIC Educational Resources Information Center

Alfaifi, Mousa S.

2016-01-01

This study aimed to determine the level of self-directed learning readiness (SDLR) among undergraduate students at Saudi Electronic University in Saudi Arabia. Also, investigated were potential relationships between the level of self-directed learning readiness and selected demographic variables such as gender and specific college within the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Billy D.; Akhil, Abbas Ali

This is the final report on a field evaluation by the Department of the Navy of twenty 5-kW PEM fuel cells carried out during 2004 and 2005 at five Navy sites located in New York, California, and Hawaii. The key objective of the effort was to obtain an engineering assessment of their military applications. Particular issues of interest were fuel cell cost, performance, reliability, and the readiness of commercial fuel cells for use as a standalone (grid-independent) power option. Two corollary objectives of the demonstration were to promote technological advances and to improve fuel performance and reliability. From a costmore » perspective, the capital cost of PEM fuel cells at this stage of their development is high compared to other power generation technologies. Sandia National Laboratories technical recommendation to the Navy is to remain involved in evaluating successive generations of this technology, particularly in locations with greater environmental extremes, and it encourages their increased use by the Navy.« less

Report on the first round of the Mock LISA Data Challenges

NASA Astrophysics Data System (ADS)

Arnaud, K. A.; Auger, G.; Babak, S.; Baker, J. G.; Benacquista, M. J.; Bloomer, E.; Brown, D. A.; Camp, J. B.; Cannizzo, J. K.; Christensen, N.; Clark, J.; Cornish, N. J.; Crowder, J.; Cutler, C.; Finn, L. S.; Halloin, H.; Hayama, K.; Hendry, M.; Jeannin, O.; Królak, A.; Larson, S. L.; Mandel, I.; Messenger, C.; Meyer, R.; Mohanty, S.; Nayak, R.; Numata, K.; Petiteau, A.; Pitkin, M.; Plagnol, E.; Porter, E. K.; Prix, R.; Roever, C.; Stroeer, A.; Thirumalainambi, R.; Thompson, D. E.; Toher, J.; Umstaetter, R.; Vallisneri, M.; Vecchio, A.; Veitch, J.; Vinet, J.-Y.; Whelan, J. T.; Woan, G.

2007-10-01

The Mock LISA Data Challenges (MLDCs) have the dual purpose of fostering the development of LISA data analysis tools and capabilities, and demonstrating the technical readiness already achieved by the gravitational-wave community in distilling a rich science payoff from the LISA data output. The first round of MLDCs has just been completed: nine challenges consisting of data sets containing simulated gravitational-wave signals produced either by galactic binaries or massive black hole binaries embedded in simulated LISA instrumental noise were released in June 2006 with deadline for submission of results at the beginning of December 2006. Ten groups have participated in this first round of challenges. All of the challenges had at least one entry which successfully characterized the signal to better than 95% when assessed via a correlation with phasing ambiguities accounted for. Here, we describe the challenges, summarize the results and provide a first critical assessment of the entries.

Readiness to change as a moderator of outcome in transdiagnostic treatment

PubMed Central

BOSWELL, JAMES F.; SAUER, SHANNON E.; GALLAGHER, MATTHEW W.; DELGADO, NICOLE; BARLOW, DAVID H.

2012-01-01

Initial symptom severity is a client characteristic associated with psychotherapy outcome, although this relationship is not well-understood. Readiness to change is a factor that may influence this relationship. This study tested readiness as a moderator of the relationship between initial severity and symptom change. Data were derived from an RCT examining the efficacy of a transdiagnostic CBT treatment. Readiness was assessed with the URICA, and symptom and functioning outcomes were assessed. Multiple regression models indicated that severity was associated with less overall change, yet readiness moderated this relationship. At higher levels of readiness, the effect of initial severity on outcome was essentially reversed; for clients with higher initial readiness, higher levels of severity were associated with greater change. PMID:22607634

Preparedness and Emergency Response Learning Centers: supporting the workforce for national health security.

PubMed

Richmond, Alyson L; Sobelson, Robyn K; Cioffi, Joan P

2014-01-01

The importance of a competent and prepared national public health workforce, ready to respond to threats to the public's health, has been acknowledged in numerous publications since the 1980s. The Preparedness and Emergency Response Learning Centers (PERLCs) were funded by the Centers for Disease Control and Prevention in 2010 to continue to build upon a decade of focused activities in public health workforce preparedness development initiated under the Centers for Public Health Preparedness program (http://www.cdc.gov/phpr/cphp/). All 14 PERLCs were located within Council on Education for Public Health (CEPH) accredited schools of public health. These centers aimed to improve workforce readiness and competence through the development, delivery, and evaluation of targeted learning programs designed to meet specific requirements of state, local, and tribal partners. The PERLCs supported organizational and community readiness locally, regionally, or nationally through the provision of technical consultation and dissemination of specific, practical tools aligned with national preparedness competency frameworks and public health preparedness capabilities. Public health agencies strive to address growing public needs and a continuous stream of current and emerging public health threats. The PERLC network represented a flexible, scalable, and experienced national learning system linking academia with practice. This system improved national health security by enhancing individual, organizational, and community performance through the application of public health science and learning technologies to frontline practice.

The READI Assessment as a Possible Predictor of Student Success in Online Communication Courses

ERIC Educational Resources Information Center

Fair, Brandy; Wickersham, Leah E.

2012-01-01

The problem under investigation for this study was to identify a method for determining a student's potential for success in an online communication course using the Readiness for Education At a Distance Indicator (READI) assessment instrument as a predictor. The READI tool focuses on six areas that students should score well on in order to be…

33 CFR 150.531 - How many fire pumps must be kept ready for use at all times?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How many fire pumps must be kept ready for use at all times? 150.531 Section 150.531 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Miscellaneous Operations § 150.531 How many fire pumps must be kept ready for use at all...

Child and environmental risk factors predicting readiness for learning in children at high risk of dyslexia.

PubMed

Dilnot, Julia; Hamilton, Lorna; Maughan, Barbara; Snowling, Margaret J

2017-02-01

We investigate the role of distal, proximal, and child risk factors as predictors of reading readiness and attention and behavior in children at risk of dyslexia. The parents of a longitudinal sample of 251 preschool children, including children at family risk of dyslexia and children with preschool language difficulties, provided measures of socioeconomic status, home literacy environment, family stresses, and child health via interviews and questionnaires. Assessments of children's reading-related skills, behavior, and attention were used to define their readiness for learning at school entry. Children at family risk of dyslexia and children with preschool language difficulties experienced more environmental adversities and health risks than controls. The risks associated with family risk of dyslexia and with language status were additive. Both home literacy environment and child health predicted reading readiness while home literacy environment and family stresses predicted attention and behavior. Family risk of dyslexia did not predict readiness to learn once other risks were controlled and so seems likely to be best conceptualized as representing gene-environment correlations. Pooling across risks defined a cumulative risk index, which was a significant predictor of reading readiness and, together with nonverbal ability, accounted for 31% of the variance between children.

[Component and System Level of the FASTRAC Engine

NASA Technical Reports Server (NTRS)

1999-01-01

The primary activities of Lee & Associates during the period 7/20/99 to 12/31/99 as specified in the referenced Purchase Order has been in direct support of the Advanced Space Technology Program OfFice's Core Propulsion Project. An independent review to assess the program readiness to conduct component and system level testing of the FASTRAC Engine and to proceed into Fabrication has been provided. This was accomplished through the identification of program weaknesses and potential failure areas and where applicable recommended solutions were suggested to the Program Office that would mitigate technical and program risk. The approach taken to satisfy the objectives has been for the contractor to provide a team of experts with relevant experience from past programs and a strong background of experience in the fields critical to the success of the program. The team participated in Test Planning, Test Readiness Reviews for system testing at Stennis Space Center, Anomaly Resolution Reviews, an Operations Audit, and data analysis. This approach worked well in satisfying the objectives and providing the Project Office with valuable information in real time and through monthly reports. During the month of December 1999 the primary effort involved the participation in anomaly resolution and the detailed review of the data from the final H3 and H4 test series performed on the FASTRAC engine in the b-2 Horizontal Test Facility at Stennis. The more significant findings and recommendations from this review are presented in this report.

Cost Estimate for Molybdenum and Tantalum Refractory Metal Alloy Flow Circuit Concepts

NASA Technical Reports Server (NTRS)

Hickman, Robert R.; Martin, James J.; Schmidt, George R.; Godfroy, Thomas J.; Bryhan, A.J.

2010-01-01

The Early Flight Fission-Test Facilities (EFF-TF) team at NASA Marshall Space Flight Center (MSFC) has been tasked by the Naval Reactors Prime Contract Team (NRPCT) to provide a cost and delivery rough order of magnitude estimate for a refractory metal-based lithium (Li) flow circuit. The design is based on the stainless steel Li flow circuit that is currently being assembled for an NRPCT task underway at the EFF-TF. While geometrically the flow circuit is not representative of a final flight prototype, knowledge has been gained to quantify (time and cost) the materials, manufacturing, fabrication, assembly, and operations to produce a testable configuration. This Technical Memorandum (TM) also identifies the following key issues that need to be addressed by the fabrication process: Alloy selection and forming, cost and availability, welding, bending, machining, assembly, and instrumentation. Several candidate materials were identified by NRPCT including molybdenum (Mo) alloy (Mo-47.5 %Re), tantalum (Ta) alloys (T-111, ASTAR-811C), and niobium (Nb) alloy (Nb-1 %Zr). This TM is focused only on the Mo and Ta alloys, since they are of higher concern to the ongoing effort. The initial estimate to complete a Mo-47%Re system ready for testing is =$9,000k over a period of 30 mo. The initial estimate to complete a T-111 or ASTAR-811C system ready for testing is =$12,000k over a period of 36 mo.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balkwill, D.L.; Reeves, R.H.

The present document is an interim technical report in which we describe the research which has been completed during the seven-month period since the start of the grant. Progress is summarized in two main areas. The first is microbiological characterization of subsurface materials from the Hanford reservation and the Idaho National Engineering Laboratory, and the second is phylogenetic characterization of these microorganisms. The major tools used for phylogenetic characterization are RFLP analysis of PCR derived material and 16S rRNA sequencing. A description of manuscripts ready for publication is also provided. 4 refs. (MHB)

Hydrologic almanac of Florida

USGS Publications Warehouse

Heath, Richard C.; Conover, Clyde Stuart

1981-01-01

This first edition is a ready reference source of information on various facts and features about water in Florida. It is aimed primarily to help bust politicians, writers, agency officials, water managers, planners, consultants, educators, hydrologists, engineers, scientists, and the general public answer questions that arise on comparative and statistical aspects on the hydrology of Florida. It contains statistical comparative data, much of which was especially prepared for the almanac, a glossary of technical terms, tabular material, and conversion factors. Also included is a selective bibliography of 174 reports on water in Florida. (USGS)

Airframe Technology Development for Next Generation Launch Vehicles

NASA Technical Reports Server (NTRS)

Glass, David E.

2004-01-01

The Airframe subproject within NASA's Next Generation Launch Technology (NGLT) program has the responsibility to develop airframe technology for both rocket and airbreathing vehicles for access to space. The Airframe sub-project pushes the state-of-the-art in airframe technology for low-cost, reliable, and safe space transportation. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas being addressed include design and integration, hot and integrated structures, cryogenic tanks, and thermal protection systems. Each of the technologies in these areas are discussed in this paper.

Evaluating the Validity of the Client Evaluation of Motivational Interviewing Scale in a Brief Motivational Intervention for College Student Drinkers.

PubMed

Madson, Michael B; Villarosa, Margo C; Schumacher, Julie A; Mohn, Richard S

2016-06-01

The Client Evaluation of Motivational Interviewing scale (CEMI) is a measure for assessing client perceptions of clinicians' use of motivational interviewing (MI). This study explored the factorial, convergent and predictive validity of the CEMI with a sample of 137 college students who completed a brief motivational intervention for alcohol harm reduction. A two factor structure was confirmed, supporting previous findings of relational and technical subscales. The CEMI technical subscale partially mediated an increase in readiness to change drinking, while the relational subscale did not. Higher scores on CEMI technical subscale predicted higher scores on the tasks, bond and goals subscales of the Working Alliance Inventory while higher scores on the CEMI relationship subscale predicted an increase in the goals subscale. Finally, the correlations between the CEMI subscales and observer-rated MI spirit score and MI adherent and non-adherent behavioral counts were in the expected directions but did not reach statistical significance. Further revision and evaluation of the CEMI is recommended. Clinical, training and research implications are provided. Copyright © 2016 Elsevier Inc. All rights reserved.

Human Spaceflight Safety for the Next Generation on Orbital Space Systems

NASA Technical Reports Server (NTRS)

Mango, Edward J.

2011-01-01

The National Aeronautics and Space Administration (NASA) Commercial Crew Program (CCP) has been chartered to facilitate the development of a United States (U.S.) commercial crew space transportation capability with the goal of achieving safe, reliable, and cost effective access to and from low Earth orbit (LEO) and the International Space Station (ISS) as soon as possible. Once the capability is matured and is available to the Government and other customers, NASA expects to purchase commercial services to meet its ISS crew rotation and emergency return objectives. The primary role of the CCP is to enable and ensure safe human spaceflight and processes for the next generation of earth orbital space systems. The architecture of the Program delineates the process for investment performance in safe orbital systems, Crew Transportation System (CTS) certification, and CTS Flight Readiness. A series of six technical documents build up the architecture to address the top-level CTS requirements and standards. They include Design Reference Missions, with the near term focus on ISS crew services, Certification and Service Requirements, Technical Management Processes, and Technical and Operations Standards Evaluation Processes.

Understanding how children’s engagement and teachers’ interactions combine to predict school readiness

PubMed Central

Williford, Amanda P.; Maier, Michelle F.; Downer, Jason T.; Pianta, Robert C.; Howes, Carolee

2015-01-01

This study examined the quality of preschool classroom experiences through the combination of teachers’ interactions at the classroom level and children’s individual patterns of engagement in predicting children’s gains in school readiness. A sample of 605 children and 309 teachers participated. The quality of children’s engagement and teacher interactions was directly observed in the classroom setting, and direct assessments of children’s school readiness skills were obtained in the fall and again in the spring. The quality of teacher interactions was associated with gains across all school readiness skills. The effect of children’s individual classroom engagement on their gains in school readiness skills (specifically phonological awareness and expressive vocabulary) was moderated by classroom level teacher interactions. The results suggest that if teachers provide highly responsive interactions at the classroom level, children may develop more equitable school readiness skills regardless of their individual engagement patterns. PMID:26722137

SaludABLEOmaha: Improving Readiness to Address Obesity Through Healthy Lifestyle in a Midwestern Latino Community, 2011–2013

PubMed Central

Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher

2015-01-01

Background A community’s readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. Community Context This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. Methods SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. Outcome The community increased in readiness from stage 3 of the Community Readiness Model, “vague awareness,” at baseline to stage 5, “preparation,” at follow-up. Interpretation SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities. PMID:25674679

Identifying Key Early Literacy and School Readiness Issues: Exploring a Strategy for Assessing Community Needs

ERIC Educational Resources Information Center

Weigel, Daniel J.; Martin, Sally S.

2006-01-01

Much effort has been expended in developing intervention programs to help improve the early literacy and school readiness skills of young children. This article presents the results of a needs assessment project aimed at identifying priorities for community intervention programs aimed at ensuring that young children enter school ready to learn. A…

Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

PubMed

Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

2016-06-01

Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Advances in participatory occupational health aimed at good practices in small enterprises and the informal sector.

PubMed

Kogi, Kazutaka

2006-01-01

Participatory programmes for occupational risk reduction are gaining importance particularly in small workplaces in both industrially developing and developed countries. To discuss the types of effective support, participatory steps commonly seen in our "work improvement-Asia" network are reviewed. The review covered training programmes for small enterprises, farmers, home workers and trade union members. Participatory steps commonly focusing on low-cost good practices locally achieved have led to concrete improvements in multiple technical areas including materials handling, workstation ergonomics, physical environment and work organization. These steps take advantage of positive features of small workplaces in two distinct ways. First, local key persons are ready to accept local good practices conveyed through personal, informal approaches. Second, workers and farmers are capable of understanding technical problems affecting routine work and taking flexible actions leading to solving them. This process is facilitated by the use of locally adjusted training tools such as local good examples, action checklists and group work methods. It is suggested that participatory occupational health programmes can work in small workplaces when they utilize low-cost good practices in a flexible manner. Networking of these positive experiences is essential.

Our Next Two Steps for Fukushima Daiichi Muon Tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyadera, Haruo

2012-04-11

After the vast disasters caused by the great earthquake and tsunami in eastern Japan, we proposed applying our Muon Tomography (MT) technique to help and improve the emergency situation at Fukushima Daiichi using cosmic-ray muons. A reactor-tomography team was formed at LANL which was supported by the Laboratory as a response to a request by the former Japanese Prime Minister, Naoto Kan. Our goal is to help the Japanese people and support remediation of the reactors. At LANL, we have carried out a proof-of-principle technical demonstration and simulation studies that established the feasibility of MT to image a reactor core.more » This proposal covers the next two critical steps for Fukushima Daiichi Muon Imaging: (1) undertake case study mock-up experiments of Fukushima Daiichi, and (2) system optimization. We requested funding to the US and Japanese government to assess damage of reactors at Fukushima Daiichi. The two steps will bring our project to the 'ready-to-go' level.« less

Readiness to Change among a Group of Heavy-Drinking College Students: Correlates of Readiness and a Comparison of Measures

ERIC Educational Resources Information Center

Harris, T. Robert; Walters, Scott T.; Leahy, Matthew M.

2008-01-01

Objective: Although several multi-item scales assess readiness to change alcohol consumption, some researchers have proposed that a small number of single-item rulers may assess readiness nearly as well. Participants: In fall 2006 and spring 2007, the authors assessed 279 participants who reported at least 1 heavy drinking episode in the 2 weeks…

Military Readiness: DODs Readiness Rebuilding Efforts May Be at Risk without a Comprehensive Plan

DTIC Science & Technology

2016-09-01

Congressional Committees September 2016 GAO-16-841 United States Government Accountability Office United States Government Accountability ...omits information DOD identified as SECRET, which must be protected from public disclosure . GAO analyzed and reviewed data on reported readiness...protected from public disclosure . Therefore, this report omits SECRET information and data such as readiness trend data, deployment data, and selected

Is School Community Readiness Related to Physical Activity before and after the Ready for Recess Intervention?

ERIC Educational Resources Information Center

Ehlers, Diane K.; Huberty, Jennifer L.; Beseler, Cheryl L.

2013-01-01

The purpose of this study was to determine: (i) the effect of schools' baseline community readiness (CR) on youth physical activity (PA) at recess prior to the Ready for Recess intervention; (ii) if changes in PA due to the intervention were explained by baseline CR and (iii) if specific components of the intervention altered an association…

Management of the Cs/Sr Capsule Project at the Hanford Site. Technology Readiness Assessment Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Federal Project Director (FPD) for the U.S. Department of Energy (DOE), Richland Operations Office (RL) Waste Management and D&D Division (WMD) requested a Technology Readiness Assessment (TRA) for the Management of the Cesium/Strontium Capsule Storage Project (MCSCP) at the Waste Encapsulation and Storage Facility (WESF) on the Hanford Site in Washington State. The MCSCP CD-1 TRA was performed by a team selected in collaboration between the Office of Environmental Management (EM) Chief Engineer (EM-3.3) and RL, WMD FPD. The TRA Team included subject matter and technical experts having experience in cask storage, process engineering, and system design who weremore » independent of the MCSCP, and the team was led by the Director of Operations and Processes from the EM Chief Engineer's Office (EM-3.32). Movement of the Cs/Sr capsules to dry storage, based on information from the conceptual design, involves (1) capsule packaging, (2) capsule transfer, and (3) capsule storage. The project has developed a conceptual process, described in 30059-R-02, "NAC Conceptual Design Report for the Management of the Cesium and Strontium Capsules Project", which identifies the five major activities in the process to complete the transfer from storage pool to pad-mounted cask storage. The process, shown schematically in Figure 1, is comprised of the following process steps: (1) loading capsules into the UCS; (2) UCS processing; (3) UCS insertion into the TSC Basket; (4) cask transport from WESF to CSA and (5) extended storage at the CSA.« less

Grid today, clouds on the horizon

NASA Astrophysics Data System (ADS)

Shiers, Jamie

2009-04-01

By the time of CCP 2008, the largest scientific machine in the world - the Large Hadron Collider - had been cooled down as scheduled to its operational temperature of below 2 degrees Kelvin and injection tests were starting. Collisions of proton beams at 5+5 TeV were expected within one to two months of the initial tests, with data taking at design energy ( 7+7 TeV) foreseen for 2009. In order to process the data from this world machine, we have put our "Higgs in one basket" - that of Grid computing [The Worldwide LHC Computing Grid (WLCG), in: Proceedings of the Conference on Computational Physics 2006 (CCP 2006), vol. 177, 2007, pp. 219-223]. After many years of preparation, 2008 saw a final "Common Computing Readiness Challenge" (CCRC'08) - aimed at demonstrating full readiness for 2008 data taking, processing and analysis. By definition, this relied on a world-wide production Grid infrastructure. But change - as always - is on the horizon. The current funding model for Grids - which in Europe has been through 3 generations of EGEE projects, together with related projects in other parts of the world, including South America - is evolving towards a long-term, sustainable e-infrastructure, like the European Grid Initiative (EGI) [The European Grid Initiative Design Study, website at http://web.eu-egi.eu/]. At the same time, potentially new paradigms, such as that of "Cloud Computing" are emerging. This paper summarizes the results of CCRC'08 and discusses the potential impact of future Grid funding on both regional and international application communities. It contrasts Grid and Cloud computing models from both technical and sociological points of view. Finally, it discusses the requirements from production application communities, in terms of stability and continuity in the medium to long term.

Contribution entrepreneurial knowledge, skills competence, and self-efficacy to student entrepreneurship readiness of multimedia expertise at vocational high school in Malang

NASA Astrophysics Data System (ADS)

Islami, Pio Arfianova Ftirizky; Elmunsyah, Hakkun; Muladi

2017-09-01

This study aims to determine the contribution of entrepreneurship knowledge, skills competence, and self-efficacy to entrepreneurship readiness. The design used in this research using a quantitative approach and knowledge test techniques using regression analysis. The number of samples in this study as many as 181 students. The results showed that there was a significant contribution between entrepreneurship knowledge to entrepreneurship readiness. There is also a significant contribution between the skills competence to entrepreneurship readiness and there is a significant contribution between self-efficacy to entrepreneurship readiness. Futhermore, there is a significant contribution simultaneously between entrepreneurship knowledge, skill competence; self-efficacy to entrepreneurship readiness.

Technology Area Roadmap for In Space Propulsion Technologies

NASA Technical Reports Server (NTRS)

Johnson, Les; Meyer, Mike; Coote, David; Goebel, Dan; Palaszewski, Bryan; White, Sonny

2010-01-01

This slide presentation reviews the technology area (TA) roadmap to develop propulsion technologies that will be used to enable further exploration of the solar system, and beyond. It is hoped that development of the technologies within this TA will result in technical solutions that will improve thrust levels, specific impulse, power, specific mass, volume, system mass, system complexity, operational complexity, commonality with other spacecraft systems, manufacturability and durability. Some of the propulsion technologies that are reviewed include: chemical and non-chemical propulsion, and advanced propulsion (i.e., those with a Technology Readiness level of less than 3). Examples of these advanced technologies include: Beamed Energy, Electric Sail, Fusion, High Energy Density Materials, Antimatter, Advanced Fission and Breakthrough propulsion technologies. Timeframes for development of some of these propulsion technologies are reviewed, and top technical challenges are reviewed. This roadmap describes a portfolio of in-space propulsion technologies that can meet future space science and exploration needs.

The GOAL-to-HAL/S translator specification. [for space shuttle

NASA Technical Reports Server (NTRS)

Stanten, S. F.; Flanders, J. H.

1973-01-01

The specification sets forth a technical framework within which to deal with the transfer of specific GOAL features to HAL/S. Key technical features of the translator are described which communicate with the data bank, handle repeat statements, and deal with software interrupts. GOAL programs, databank information, and GOAL system subroutines are integrated into one GOAL in HAL/S. This output is fully compatible HAL/S source ready for insertion into the HAL/S compiler. The Translator uses a PASS1 to establish all the global data needed for the HAL/S output program. Individual GOAL statements are translated in PASS2. The specification document makes extensive use of flowcharts to specify exactly how each variation of each GOAL statement is to be translated. The specification also deals with definitions and assumptions, executive support structure and implementation. An appendix, entitled GOAL-to-HAL Mapping, provides examples of translated GOAL statements.

Alliance College-Ready Public Schools: Alice M. Baxter College-Ready High School

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

The largest charter organization in Los Angeles serving more than 11,000 low-income students aims to prove it is possible to educate students at high levels across an entire system of schools. Alliance College-Ready Public Schools developed the PACE blended learning model, launched at the new Baxter High School, to more effectively prepare its…

Effectiveness of a handwriting readiness program in head start: a two-group controlled trial.

PubMed

Lust, Carol A; Donica, Denise K

2011-01-01

This study measured skill improvement in prewriting skills, kindergarten readiness, first-name writing, and handwriting-nonspecific fine motor skills of students at Head Start who participated in Handwriting Without Tears-Get Set for School (HWT-GSS) programming. We conducted a two-group, nonrandomized controlled trial using a pretest-posttest design at a rural Head Start. The effectiveness of adding the HWT-GSS curriculum in one preschool classroom was compared with a control classroom. On posttesting, the experimental group made significant improvements compared with the control group in prewriting, kindergarten readiness, and fine motor skills. Both groups made significant improvements between pretesting and posttesting in prewriting, first name writing, and school readiness. Adding HWT-GSS to the Head Start program would be beneficial in improving handwriting readiness skills.

Environmental and technical assessments of the potential utilization of sewage sludge ashes (SSAs) as secondary raw materials in construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Maozhe; Blanc, Denise, E-mail: denise.blanc-biscarat@insa-lyon.fr; Gautier, Mathieu

2013-05-15

Highlights: ► We used sewage sludge ashes in ready-mix concrete recipe. ► SSAs were used as a substitution of cement. ► Compressive strength of ready-mix concrete incorporating SSAs were similar as blank one. ► Contaminants leaching from concrete monoliths were above threshold limits. - Abstract: Ashes produced by thermal treatments of sewage sludge exhibit common properties with cement. For example, major elements present in SSA are the same of major elements of cement. Hydraulic properties of SSA are quite the same of cement ones. They may therefore be used to substitute part of cement in concrete or other cementitious materials,more » provided that technical prescriptions are satisfied and that environmental risks are not significantly increased. The objective of the present study was to determine the appropriate substitution ratios to satisfy both technical and environmental criteria. In a first step, the elemental composition and particle size distribution of the ashes were measured. Then the ashes were used along with Portland cement and sand at different ratios of substitution to produce mortar and concrete which were cured for up to 90 days into parallelepipedic or cylindrical monoliths. The mechanical properties of the monoliths were measured using standard procedures for flexural and compressive strengths, and compared to blanks containing no ashes. The environmental criteria were assessed using leaching tests conducted according to standard protocols both on the ashes and the monoliths, and compared to the blanks. Results showed that the characteristics of the ashes ranged between those of cement and sand because of their larger particle size and higher content in SiO{sub 2} as compared to cement. The monoliths made with the highest substitution ratios exhibited a significant decrease in flexural and compressive strengths. However, when the ashes were used in partial substitution of cement at appropriate ratios, the concrete monoliths exhibited similar compressive strengths as the blank samples. The most appropriate ratios were found to be 10% substitution of cement and 2% substitution of sand. The leaching tests conducted on the ashes in their powdery form revealed that amongst the potential contaminants analyzed only Mo and Se were leached at concentrations above the threshold limits considered. The leaching tests conducted on concrete monoliths showed however that none of the contaminants monitored, including Mo and Se, were leached above the limits. In addition, whether concrete recipe incorporated ashes or not, similar concentrations were measured for each potential contaminant in the leachates. This result indicated that mixing ash with cement and sand to produce mortar or concrete induced a stabilization of Mo and Se and thereby constituted in itself a good treatment of the ashes.« less

Mobil process converts methanol to high-quality synthetic gasoline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, A.

1978-12-11

If production of gasoline from coal becomes commercially attractive in the United States, a process under development at the Mobil Research and Development Corp. may compete with better known coal liquefaction processes. Mobil process converts methanol to high-octane, unleaded gasoline; methanol can be produced commercially from coal. If gasoline is the desired product, the Mobil process offers strong technical and cost advantages over H-coal, Exxon donor solvent, solvent-refined coal, and Fischer--Tropsch processes. The cost analysis, contained in a report to the Dept. of Energy, concludes that the Mobil process produces more-expensive liquid products than any other liquefaction process except Fischer--Tropsch.more » But Mobil's process produces ready-to-use gasoline, while the others produce oils which require further expensive refining to yield gasoline. Disadvantages and advantages are discussed.« less

Universal School Readiness Screening at Kindergarten Entry

ERIC Educational Resources Information Center

Quirk, Matthew; Dowdy, Erin; Dever, Bridget; Carnazzo, Katherine; Bolton, Courtney

2018-01-01

Researchers examined the concurrent and predictive validity of a brief (12-item) teacher-rated school readiness screener, the Kindergarten Student Entrance Profile (KSEP), using receiver operating characteristic (ROC) curve analysis to examine associations between (N = 78) children's social-emotional (SE) and cognitive (COG) readiness with…

Technology Performance Level Assessment Methodology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph

The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within themore » TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.« less

Readiness and motivation for change among young women with broadly defined eating disorders.

PubMed

Ålgars, Monica; Ramberg, Carin; Moszny, Josefine; Hagman, Jessica; Rintala, Hanna; Santtila, Pekka

2015-01-01

Readiness and motivation for change were examined in 32 women with broadly defined eating disorders who took part in a 10-week Cognitive Behavioral Therapy (CBT)-based group intervention. Readiness for change and eating disorder psychopathology were assessed before and after the intervention. The results revealed significant negative associations between degree of eating disorder symptoms and degree of readiness for change before the intervention started. In particular, higher levels of eating concern, shape concern, and body dissatisfaction were associated with lower motivation for change. No significant associations between degree of readiness for change before the intervention started and changes in eating disorder symptoms at the end of intervention were found. Readiness for change increased from the beginning to the end of the intervention, indicating that group CBT may be a cost-effective and time-efficient way of enhancing readiness and motivation for change in individuals with eating psychopathology.

Ready for Reuse (RfR) Determinations at Superfund Sites

EPA Pesticide Factsheets

A Ready for Reuse (RfR) determination is a redevelopment tool that EPA has created to provide information that a site is “ready for reuse” and will remain protective for that use, so long as any use limitations established by EPA continue to be met.

Evaluating Community Readiness to Implement Environmental and Policy-Based Alcohol Abuse Prevention Strategies in Wisconsin

PubMed Central

Paltzer, Jason; Black, Penny; Moberg, D. Paul

2013-01-01

Background Matching evidence-based alcohol prevention strategies with a community’s readiness to support those strategies is the basis for the Tri-Ethnic Community Readiness Model (CRM). The purpose of this evaluation was to assess the association of a community’s readiness to address alcohol abuse in their community with the implementation of environmental and policy-based strategies. Methods Twenty-one substance abuse prevention coalitions in Wisconsin participated in a pre-post intervention group-only evaluation using the CRM. As part of a Substance Abuse and Mental Health Services Administration (SAMHSA) grant, all grantees were obligated by the Wisconsin Department of Health Services to implement environmental and policy-based strategies focused on one of three priority areas: young adult binge drinking, underage drinking, and alcohol-related motor-vehicle injuries and fatalities. Results At baseline, all communities (n=21) scored at or below a Stage 4 (on a scale of 1–9) readiness level (“preparedness”). The mean change in community readiness over the three-year period (2009–2011) was significant, but was less than one complete CRM stage (0.77, p=<0.001; 95% CI: 0.49, 1.05). Conclusion These findings suggest that implementation of environmental and policy-based strategies may improve a community’s progression in perceived readiness to address alcohol abuse regardless of the community’s baseline level of readiness to address alcohol abuse. Recommendation An assessment specific for measuring community readiness for policy-related strategies should be developed. The assessment would include community-level factors (e.g. community climate) for implementing policy-related prevention strategies, and not assume a linear readiness model. PMID:25346555

The DAWN Project's Transition to Mission Operations: on Its Way to Rendezvous with (4) Vesta and (1) Ceres

NASA Technical Reports Server (NTRS)

Rayman, Marc D.; Patel, Keyur C.

2008-01-01

Dawn launched on 27 September 2007 on a mission to orbit main belt asteroids (4) Vesta in 2011 - 2012 and (1) Ceres in 2015. The operations team conducted an extensive set of assessments of the engineering subsystems and science instruments during the first 80 days of the mission. A major objective of this period was to thrust for one week with the ion propulsion system to verify flight and ground systems readiness for typical interplanetary operations. Upon successful conclusion of the checkout phase, the interplanetary cruise phase began, most of which will be devoted to thrusting. The flexibility afforded by the use of ion propulsion enabled the project to accommodate a launch postponement of more than 3 months caused by a combination of launch vehicle and tracking system readiness, unfavorable weather, and then conflicts with other launches. Even with the shift in the launch date, all of the science objectives are retained with the same schedule and greater technical margins. This paper describes the conclusion of the development phase of the project, launch operations, and the progress of mission operations.

Dropout Factories: The Profitability of "At-Risk" Students

ERIC Educational Resources Information Center

Eastman, Nicholas J.

2016-01-01

Every public school teacher today is charged, above all else, with a utilitarian form of workforce preparation: college and career readiness. The distinction between college and career is superficial. The overarching goal of both is career readiness, and STEM careers are the darlings of the "readiness" discourse. Within the STEM reform…

Career readiness in adult survivors of childhood cancer: a report from the St. Jude Lifetime Cohort study

PubMed Central

Strauser, David; Klosky, James L.; Brinkman, Tara M.; Wong, Alex W.K.; Chan, Fong; Lanctot, Jennifer Q.; Ojha, Rohit P.; Robison, Leslie L.; Hudson, Melissa M.; Ness, Kirsten K.

2014-01-01

Purpose Adult survivors of childhood cancer experience difficulties in obtaining and maintaining employment. Employment-related challenges are associated with treatment-related health conditions, and may also be related to vocational factors such as career readiness, skill acquisition, and work experience. Unfortunately, little is known about how treatment, health and vocational related factors interact to impact career development among childhood cancer survivors. Methods 385 adult survivors of childhood cancer (42.1% male, median age 38 (21-62) years), participating in the St. Jude Lifetime Cohort study, completed a work experiences survey that included measures of career readiness and vocational identity. Logistic regression was used to compare characteristics of survivors in the low career readiness category to those in the medium or high career readiness category, and structural equation modeling (SEM) was utilized to evaluate associations between career readiness, vocational identity, treatment intensity and physical/emotional health. Results Low career readiness was prevalent in 17.4% of survivors. Univariate analysis did not identify any significant associations between cancer treatment-related factors and career readiness. Unemployed survivors (Odds ratio (OR) 2.3, 95% Confidence Interval (CI) 1.2-4.5), those who were not college graduates (OR 3.0, 95% CI 1.6-5.6), and those who had no personal income (OR 5.9, 95% CI 1.7-30.9) were at increased risk of low career readiness. SEM indicated that associations between treatment intensity, physical health, age at diagnosis and career readiness were mediated by emotional health and vocational identity. 63%, 35%, and 10% of the variance in career readiness, vocational identity, and emotional health, respectively, were explained by this theoretical model. Conclusions The results of this study indicate that individuals who reported low levels of career readiness were more likely to be unemployed, earn less than $40,000 per year, and were less likely to graduate from high school. The final structural model indicates that vocational identity and emotional health accounted for the indirect effect of treatment intensity, age a diagnosis, and physical health on career readiness. Implications for Cancer Survivors Addressing career readiness may be important to improve employment outcomes for adult survivors of childhood cancer. PMID:25047713

Why Not an Informal Reading Readiness Inventory?

ERIC Educational Resources Information Center

Drake, Suzanne V.

1990-01-01

Reading readiness is defined, and the assessment of emergent literacy is discussed. An informal Reading Readiness Inventory is proposed to provide a profile of students' specific strengths and weaknesses at the beginning levels. The assessment comprises such subtests as oral cloze, sound/symbol relationships, and instant recognition of high…

75 FR 65620 - Inglis Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...: Inglis Hydropower, LLC. e. Name of Project: Inglis Hydropower Project. f. Location: The project would be... ready for environmental analysis at this time. l. The proposed 2.0-megawatt Inglis Hydropower Project...

Length of stay after vaginal birth: sociodemographic and readiness-for-discharge factors.

PubMed

Weiss, Marianne; Ryan, Polly; Lokken, Lisa; Nelson, Magdalen

2004-06-01

The impact of reductions in postpartum length of stay have been widely reported, but factors influencing length of hospital stay after vaginal birth have received less attention. The study purpose was to compare the sociodemographic characteristics and readiness for discharge of new mothers and their newborns at 3 discharge time intervals, and to determine which variables were associated with postpartum length of stay. The study sample comprised 1,192 mothers who were discharged within 2 postpartum days after uncomplicated vaginal birth at a tertiary perinatal center in the midwestern United States. The sample was divided into 3 postpartum length-of-stay groups: group 1 (18-30 hr), group 2 (31-42 hr), and group 3 (43-54 hr). Sociodemographic and readiness-for-discharge data were collected by self-report and from a computerized hospital information system. Measures of readiness for discharge included perceived readiness (single item and Readiness for Discharge After Birth Scale), documented maternal and neonatal clinical problems, and feeding method. Compared with other groups, the longest length-of-stay group was older; of higher socioeconomic status and education; and with more primiparous, breastfeeding, white, married mothers who were living with the baby's father, had adequate home help, and had a private payor source. This group also reported greater readiness for discharge, but their newborns had more documented clinical problems during the postbirth hospitalization. In logistic regression modeling, earlier discharge was associated with young age, multiparity, public payor source, low socioeconomic status, lack of readiness for discharge, bottle-feeding, and absence of a neonatal clinical problem. Sociodemographic characteristics and readiness for discharge (clinical and perceived) were associated with length of postpartum hospital stay. Length of stay is an outcome of a complex interface between patient, provider, and payor influences on discharge timing that requires additional study. Including perceived readiness for discharge in clinical discharge criteria will add an important dimension to assessment of readiness for discharge after birth.

Contaminated Human Remains: Transportable Decontamination - 1. Technical Readiness Level Estimate. 2. Vaccinia Virus Ionizing Radiation Inactivation in a Human Phantom. 3. Current State of Technology Relevant to Development of a Transportable System for Treatment of Contaminated Human Remains

DTIC Science & Technology

2011-05-30

affect chemical agents. Therefore no change in the methods for chemical or radiological decontamination would be necessary. 14. Radiation...here is the high radiation doses do affect the ability to polymerase chain reaction methods. It appears, depending on the dose and target, these...2001) Bacillus spore inactivation methods affect detection assays. Appl Environ Microbiol. 67(8): p. 3665‐70. DeCarlos, A. and Paez, E. (1991

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

1980-01-01

A process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use was developed. The process sequence was then critically analyzed from a technical and economic standpoint to determine the technological readiness of certain process steps for implementation. The steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect, both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development.

Overview of Heatshield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Driver, David M.; Ellerby, Donald T.; Gasch, Matthew J.; Mahzari, Milad; Milos, Frank S.; Nishioka, Owen S.; Stackpoole, Margaret M.; Venkatapathy, Ethiraj; Young, Zion W.; Gage, Peter J.;

Early results of percutaneous arteriovenous fistula creation with the Ellipsys Vascular Access System.

PubMed

Mallios, Alexandros; Jennings, William C; Boura, Benoit; Costanzo, Alessandro; Bourquelot, Pierre; Combes, Myriam

2018-04-18

We reviewed our initial experience creating a percutaneous arteriovenous fistula (pAVF) using a thermal resistance anastomosis device with proximal radial artery inflow. A retrospective review was conducted of all patients who underwent a pAVF creation procedure between May 2017 and October 2017. Primary end points of the study were technical success, patency by Doppler ultrasound examination or angiography, flow levels achieved, time to first use, and pAVF-related complications. A pAVF was attempted in 34 patients with technical success in 33 individuals (97%). Patency of the pAVF was 94%. Mean access flow was 946 mL/min (brachial artery measurement) at the latest follow-up visit (53-229 days; average, 141 days). At 6 weeks, all fistulas have been used or were ready for dialysis by clinical examination or ultrasound examination. Only one patient required superficialization of the upper arm cephalic vein by lipectomy. There were no adverse events related to the pAVF creation or use, nor was there need for further interventions. Successful pAVFs with proximal radial artery inflow were created with excellent initial results regarding technical success, patency, and safety. Advantages include avoidance of a surgical incision, short procedure times, good acceptance by patients, prompt access maturation, moderate flow, and low-pressure access, with possible reduction of risk for ischemic complications. Avoidance of vessel manipulation and side branch ligation might reduce risk of thrombosis and improve long-term patency and reduce need for further interventions. These early findings need to be confirmed in larger and longer follow-up studies. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Semiautomated external defibrillators for in-hospital early defibrillation: a comparative study.

PubMed

Nocchi, Federico; Derrico, Pietro; Masucci, Gerardina; Capussotto, Carlo; Cecchetti, Corrado; Ritrovato, Matteo

2014-01-01

Semiautomated external defibrillators (AEDs) should be considered as a means to facilitate in-hospital early defibrillation (IHED) in areas where advanced life support rescuers are not readily available. In this study, we aimed to develop a checklist and a measurement protocol to evaluate and compare AEDs by assessing factors that may affect IHED. A clinical and technical comparison of six AEDs was performed. Technical specifications were analyzed, while an emergency team evaluated ergonomics and appropriateness for IHED at Bambino Gesù Children's Hospital. A measurement protocol was implemented, which aimed to assess the ability of defibrillators to recognize shockable and nonshockable rhythms, accuracy of delivered energy, and charging time. Designs of AEDs differed in several features which influence their appropriateness for IHED. Some units showed poor ergonomics and instructions/feedback for cardiopulmonary resuscitation. Differences between defibrillators in recognizing shockable and nonshockable rhythms emerged for polymorphic ventricular tachycardia waveforms and when the frequency and amplitude of input signals varied. Tests for accuracy revealed poor performances at low and high impedance levels for most AEDs. Notably, differences greater than 20 seconds were found in the time from power-on to "ready for discharge." The approach we used to assess AEDs allowed us to evaluate their appropriateness with respect to the organizational context, to measure their parameters, and to compare models. Results showed that ergonomics and/or performances (timing and accuracy) could be improved in each device.

Profiles of Social-Emotional Readiness for 4-Year-Old Kindergarten

PubMed Central

Miller, Michele M.; Goldsmith, H. Hill

2017-01-01

Children who are viewed as ready for kindergarten and/or first grade typically exhibit high attention, approach, and adaptability coupled with low activity and reactivity. These characteristics tend to be especially valued by teachers and describe a child who is “teachable,” or school ready. Since many children enter formal schooling earlier by attending pre-K for 4-year olds, often called 4-year-old kindergarten, there is a need to examine school readiness earlier than kindergarten, which may look very different developmentally. If we expect children to enter formal schooling at age 4, then it should be clear what we expect of them in order to succeed. We explored which temperament, behavior, and cognitive items teachers of 4-year-old kindergarten (N = 29) rated as highly characteristic versus uncharacteristic of ready 4-year-olds. This teacher-generated data identified five clusters of children who were deemed ready for 4-year-old kindergarten. Teachers noted high cognitive skills and following directions as salient in many of the clusters, which aligns with the readiness expectations for kindergarten and first grade. However, items that distinguished the five clusters from one another referenced differences in activity level, sociability, shyness, enthusiasm, and patience that were not expected based on the previous literature with slightly older children. Given that some of the children teachers identified as especially ready for 4-year-old kindergarten did not fit this static model of a “teachable” child, a single profile of school readiness at an early age may be inappropriate. PMID:28197124

The Development of Model for Measuring Railway Wheels Manufacturing Readiness Level

NASA Astrophysics Data System (ADS)

Inrawan Wiratmadja, Iwan; Mufid, Anas

2016-02-01

In an effort to grow the railway wheel industry in Indonesia and reduce the dependence on imports, Metal Industries Development Center (MIDC) makes the implementation of the railway wheel manufacturing technology in Indonesia. MIDC is an institution based on research and development having a task to research the production of railway wheels prototype and acts as a supervisor to the industry in Indonesia, for implementing the railway wheel manufacturing technology. The process of implementing manufacturing technology requires a lot of resources. Therefore it is necessary to measure the manufacturing readiness process. Measurement of railway wheels manufacturing readiness was in this study done using the manufacturing readiness level (MRL) model from the United States Department of Defense. MRL consists of 10 manufacturing readiness levels described by 90 criteria and 184 sub-criteria. To get a manufacturing readiness measurement instrument that is good and accurate, the development process involved experts through expert judgment method and validated with a content validity ratio (CVR). Measurement instrument developed in this study consist of 448 indicators. The measurement results show that MIDC's railway wheels manufacturing readiness is at the level 4. This shows that there is a gap between the current level of manufacturing readiness owned by MIDC and manufacturing readiness levels required to achieve the program objectives, which is level 5. To achieve the program objectives at level 5, a number of actions were required to be done by MIDC. Indicators that must be improved to be able to achieve level 5 are indicators related to the cost and financing, process capability and control, quality management, workers, and manufacturing management criteria.

A review of planetary and space science projects presented at iCubeSat, the Interplanetary CubeSat Workshop

NASA Astrophysics Data System (ADS)

Johnson, Michael

2015-04-01

iCubeSat, the Interplanetary CubeSat Workshop, is an annual technical workshop for researchers working on an exciting new standardised platform and opportunity for planetary and space scientists. The first workshop was held in 2012 at MIT, 2013 at Cornell, 2014 at Caltech with the 2015 workshop scheduled to take place on the 26-27th May 2015 at Imperial College London. Mission concepts and flight projects presented since 2012 have included orbiters and landers targeting asteroids, the moon, Mars, Venus, Saturn and their satellites to perform science traditionally reserved for flagship missions at a fraction of their cost. Some of the first missions proposed are currently being readied for flight in Europe, taking advantage of multiple ride share launch opportunities and technology providers. A review of these and other interplanetary CubeSat projects will be presented, covering details of their science objectives, instrument capabilities, technology, team composition, budget, funding sources, and the other programattic elements required to implement this potentially revolutionary new class of mission.

The utility of single-item readiness screeners in middle school.

PubMed

Lewis, Crystal G; Herman, Keith C; Huang, Francis L; Stormont, Melissa; Grossman, Caroline; Eddy, Colleen; Reinke, Wendy M

2017-10-01

This study examined the benefit of utilizing one-item academic and one-item behavior readiness teacher-rated screeners at the beginning of the school year to predict end-of-school year outcomes for middle school students. The Middle School Academic and Behavior Readiness (M-ABR) screeners were developed to provide an efficient and effective way to assess readiness in students. Participants included 889 students in 62 middle school classrooms in an urban Missouri school district. Concurrent validity with the M-ABR items and other indicators of readiness in the fall were evaluated using Pearson product-moment correlation coefficients, with the academic readiness item having medium to strong correlations with other baseline academic indicators (r=±0.56 to 0.91) and the behavior readiness item having low to strong correlations with baseline behavior items (r=±0.20 to 0.79). Next, the predictive validity of the M-ABR items was analyzed with hierarchical linear regressions using end-of-year outcomes as the dependent variable. The academic and behavior readiness items demonstrated adequate validity for all outcomes with moderate effects (β=±0.31 to 0.73 for academic outcomes and β=±0.24 to 0.59 for behavioral outcomes) after controlling for baseline demographics. Even after controlling for baseline scores, the M-ABR items predicted unique variance in almost all outcome variables. Four conditional probability indices were calculated to obtain an optimal cut score, to determine ready vs. not ready, for both single-item M-ABR scales. The cut point of "fair" yielded the most acceptable values for the indices. The odd ratios (OR) of experiencing negative outcomes given a "fair" or lower readiness rating (2 or below on the M-ABR screeners) at the beginning of the year were significant and strong for all outcomes (OR=2.29 to OR=14.46), except for internalizing problems. These findings suggest promise for using single readiness items to screen for varying negative end-of-year student outcomes. Copyright © 2017 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Stage of Motivational Readiness: Predictive Ability for Exercise Behavior.

ERIC Educational Resources Information Center

Young, Deborah Rohm; King, Abby C.; Sheehan, Mary; Stefanick, Marcia L.

2002-01-01

Investigated whether stage of motivational readiness for exercise predicted adherence to an exercise intervention. Adults randomized into a trial had the exercise goal of completing or adding at least 10 miles of weekly brisk walking or jogging. Baseline exercise motivational readiness was assessed. Adherence was determined from logs. Overall, 64…

Predicting Early School Achievement with the EDI: A Longitudinal Population-Based Study

ERIC Educational Resources Information Center

Forget-Dubois, Nadine; Lemelin, Jean-Pascal; Boivin, Michel; Dionne, Ginette; Seguin, Jean R.; Vitaro, Frank; Tremblay, Richard E.

2007-01-01

School readiness tests are significant predictors of early school achievement. Measuring school readiness on a large scale would be necessary for the implementation of intervention programs at the community level. However, assessment of school readiness is costly and time consuming. This study assesses the predictive value of a school readiness…

READINESS AND PHONETIC ANALYSIS OF WORDS IN GRADES K-2.

ERIC Educational Resources Information Center

CAMPBELL, BONNIE; QUINN, GOLDIE

THE METHOD USED AT THE BELLEVUE, NEBRASKA, PUBLIC SCHOOLS TO TEACH READING READINESS AND THE PHONETIC ANALYSIS OF WORDS IN KINDERGARTEN THROUGH GRADE TWO IS DESCRIBED. SUGGESTIONS FOR TEACHING THE READINESS SKILLS OF AUDITORY AND VISUAL PERCEPTION, VOCABULARY SKILLS OF WORD RECOGNITION AND WORD MEANING, AND THE PHONETIC ANALYSIS OF WORDS IN GRADES…

Putting College and Career Readiness at the Forefront of District Priorities in Dallas

ERIC Educational Resources Information Center

Hall, Shane

2013-01-01

Dallas Independent School District's (ISD) efforts to develop a system of college readiness indicators began in 2008, when they received a Bill & Melinda Gates Foundation grant under the foundation's College-Ready Education initiative. With this grant, Dallas ISD's Performance Management and Analytics department developed a college readiness…

Getting on Board: The Private Sector and Learning Readiness.

ERIC Educational Resources Information Center

Koprowicz, Constance; Myers, John

Developed by the Women's NETWORK, a group representing women serving in state legislatures in the United States, this report examines how the private sector is involved in promoting learning readiness at the preschool level. The report begins with an introduction and a discussion of the importance of learning readiness as a national goal. The…

ELL School Readiness and Pre-Kindergarten Care

ERIC Educational Resources Information Center

Gottfried, Michael A.

2017-01-01

The increased utilization of non-parental pre-kindergarten care has spurred interest by both researchers and policy makers as to what types of care might be effective at boosting school readiness. Under-developed in the research has been an assessment of the influence of pre-kindergarten care on school readiness for English Language Learners…

Assessment of Readiness to Participate in Distance Learning of the Certified Florida Behavioral Workforce

ERIC Educational Resources Information Center

Baston, George R.

2011-01-01

This research study explored perceptions of readiness to participate in distance learning among the certified behavioral workforce in Florida. The study sought to determine if there were significant differences in perception of readiness to participate in distance learning between certified behavioral health professionals at the administrator…

78 FR 53002 - Notice of Proposed Buy America Waiver for a Video Ready Access Device Cabinet

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration [Docket No. FTA-2013-0035] Notice of Proposed Buy America Waiver for a Video Ready Access Device Cabinet AGENCY: Federal Transit Administration... rules for a Video Ready Access Device (VRAD) cabinet. The VRAD cabinet is needed for an AT&T utility...

Important skills for biomedical services: The perspectives of Malaysian employers and employees.

PubMed

Buntat, Yahya; Saud, Muhammad Sukri; Mokhtar, Mahani; Kamin, Yusri; Feh, Lim Set

2016-10-17

Increase in the occurrence of existing diseases, continual emergence of new or exotic diseases and re-emergence of old diseases have placed increasing demands on biomedical services in Malaysia. Biomedical technicians play an important role in operating biomedical instruments. However, there are no clear specifications about characteristics and traits for these semi-professional employees. Employers in a few studies claimed that biomedical graduates are not ready to enter and face challenges in the job market. Therefore, the purpose of this study is to identify technical and generic skills for a biomedical technician from the perspectives of the biomedical technicians and their employers. A quantitative survey design was employed whereby data were obtained through the administration of an instrument developed by the researchers. The sample consisted of 20 hospital managers and 186 biomedical technicians who are currently working in Malaysian government hospitals. The findings show that there are no difference in the perceptions of hospital managers and biomedical technicians regarding technical and non-technical skills. These findings resulted in a checklist which can be used for institutions to produce future biomedical technician graduates in order to meet job demands. However, future research is needed to validate the findings and explore the variables in depth.

Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Shah, Nihar; Phadke, Amol

Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less

Serving high-risk foods in a high-risk setting: survey of hospital food service practices after an outbreak of listeriosis in a hospital.

PubMed

Cokes, Carolyn; France, Anne Marie; Reddy, Vasudha; Hanson, Heather; Lee, Lillian; Kornstein, Laura; Stavinsky, Faina; Balter, Sharon

2011-04-01

Prepared ready-to-eat salads and ready-to-eat delicatessen-style meats present a high risk for Listeria contamination. Because no foodborne illness risk management guidelines exist specifically for US hospitals, a survey of New York City (NYC) hospitals was conducted to characterize policies and practices after a listeriosis outbreak occurred in a NYC hospital. From August through October 2008, a listeriosis outbreak in a NYC hospital was investigated. From February through April 2009, NYC's 61 acute-care hospitals were asked to participate in a telephone survey regarding food safety practices and policies, specifically service of high-risk foods to patients at increased risk for listeriosis. Five patients with medical conditions that put them at high risk for listeriosis had laboratory-confirmed Listeria monocytogenes infection. The Listeria outbreak strain was isolated from tuna salad prepared in the hospital. Fifty-four (89%) of 61 hospitals responded to the survey. Overall, 81% of respondents reported serving ready-to-eat deli meats to patients, and 100% reported serving prepared ready-to-eat salads. Pregnant women, patients receiving immunosuppressive drugs, and patients undergoing chemotherapy were served ready-to-eat deli meats at 77%, 59%, and 49% of hospitals, respectively, and were served prepared ready-to-eat salads at 94%, 89%, and 73% of hospitals, respectively. Only 4 (25%) of 16 respondents reported having a policy that ready-to-eat deli meats must be heated until steaming hot before serving. Despite the potential for severe outcomes of Listeria infection among hospitalized patients, the majority of NYC hospitals had no food preparation policies to minimize risk. Hospitals should implement policies to avoid serving high-risk foods to patients at risk for listeriosis.

Organizational readiness in specialty mental health care.

PubMed

Hamilton, Alison B; Cohen, Amy N; Young, Alexander S

2010-01-01

Implementing quality improvement efforts in clinics is challenging. Assessment of organizational "readiness" for change can set the stage for implementation by providing information regarding existing strengths and deficiencies, thereby increasing the chance of a successful improvement effort. This paper discusses organizational assessment in specialty mental health, in preparation for improving care for individuals with schizophrenia. To assess organizational readiness for change in specialty mental health in order to facilitate locally tailored implementation strategies. EQUIP-2 is a site-level controlled trial at nine VA medical centers (four intervention, five control). Providers at all sites completed an organizational readiness for change (ORC) measure, and key stakeholders at the intervention sites completed a semi-structured interview at baseline. At the four intervention sites, 16 administrators and 43 clinical staff completed the ORC, and 38 key stakeholders were interviewed. The readiness domains of training needs, communication, and change were the domains with lower mean scores (i.e., potential deficiencies) ranging from a low of 23.8 to a high of 36.2 on a scale of 10-50, while staff attributes of growth and adaptability had higher mean scores (i.e., potential strengths) ranging from a low of 35.4 to a high of 41.1. Semi-structured interviews revealed that staff perceptions and experiences of change and decision-making are affected by larger structural factors such as change mandates from VA headquarters. Motivation for change, organizational climate, staff perceptions and beliefs, and prior experience with change efforts contribute to readiness for change in specialty mental health. Sites with less readiness for change may require more flexibility in the implementation of a quality improvement intervention. We suggest that uptake of evidence-based practices can be enhanced by tailoring implementation efforts to the strengths and deficiencies of the organizations that are implementing quality improvement changes.

Late Talkers: A Population-Based Study of Risk Factors and School Readiness Consequences.

PubMed

Hammer, Carol Scheffner; Morgan, Paul; Farkas, George; Hillemeier, Marianne; Bitetti, Dana; Maczuga, Steve

2017-03-01

This study was designed to (a) identify sociodemographic, pregnancy and birth, family health, and parenting and child care risk factors for being a late talker at 24 months of age; (b) determine whether late talkers continue to have low vocabulary at 48 months; and (c) investigate whether being a late talker plays a unique role in children's school readiness at 60 months. We analyzed data from the Early Childhood Longitudinal Study, a population-based sample of 9,600 children. Data were gathered when the children were 9, 24, 48, and 60 months old. The risk of being a late talker at 24 months was significantly associated with being a boy, lower socioeconomic status, being a nonsingleton, older maternal age at birth, moderately low birth weight, lower quality parenting, receipt of day care for less than 10 hr/week, and attention problems. Being a late talker increased children's risk of having low vocabulary at 48 months and low school readiness at 60 months. Family socioeconomic status had the largest and most profound effect on children's school readiness. Limited vocabulary knowledge at 24 and 48 months is uniquely predictive of later school readiness. Young children with low vocabularies require additional supports prior to school entry.

Enhancing organizational capacity to provide cancer control programs among Latino churches: design and baseline findings of the CRUZA Study.

PubMed

Allen, Jennifer D; Torres, Maria Idali; Tom, Laura S; Rustan, Sarah; Leyva, Bryan; Negron, Rosalyn; Linnan, Laura A; Jandorf, Lina; Ospino, Hosffman

2015-04-09

Faith-based organizations (FBOs) have been successful in delivering health promotion programs for African Americans, though few studies have been conducted among Latinos. Even fewer have focused on organizational change, which is required to sustain community-based initiatives. We hypothesized that FBOs serving Latinos would be more likely to offer evidence-based strategies (EBS) for cancer control after receiving a capacity enhancement intervention to implement health programs, and designed the CRUZA trial to test this hypothesis. This paper describes the CRUZA design and baseline findings. We identified Catholic parishes in Massachusetts that provided Spanish-language mass (n = 65). A baseline survey assessed organizational characteristics relevant to adoption of health programs, including readiness for adoption, "fit" between innovation and organizational mission, implementation climate, and organizational culture. In the next study phase, parishes that completed the baseline assessment will be recruited to a randomized cluster trial, with the parish as the unit of analysis. Both groups will receive a Program Manual and Toolkit. Capacity Enhancement parishes will also be offered technical support, assistance forming health committees and building inter-institutional partnerships, and skills-based training. Of the 49 parishes surveyed at baseline (75%), one-third (33%) reported having provided at least one health program in the prior year. However, only two program offerings were cancer-specific. Nearly one-fifth (18%) had an active health ministry. There was a high level of organizational readiness to adopt cancer control programs, high congruence between parish missions and CRUZA objectives, moderately conducive implementation climates, and organizational cultures supportive of CRUZA programming. Having an existing health ministry was significantly associated with having offered health programs within the past year. Relationships between health program offerings and other organizational characteristics were not statistically significant. Findings suggest that many parishes do not offer cancer control programs, yet many may be ready to do so. However, the perceptions about existing organizational practices and policies may not be conducive to program initiation. A capacity enhancement intervention may hold promise as a means of increasing health programming. The efficacy of such an intervention will be tested in phase two of this study.

Global Competency Education Catches Fire at a Rural University

ERIC Educational Resources Information Center

Talbot, Patricia A.; Gustafson, Glenna; Mistele, Jean

2017-01-01

World-ready learners require world-ready educators. One group of inspiring teacher educators share how they ignited a fire of awareness around the importance of global competency education at a small, rural teacher college.

Cognitive skills training in digital era: A paradigm shift in surgical education using the TaTME model.

PubMed

Knol, Joep; Keller, Deborah S

2018-04-30

Surgical competence is a complex, multifactorial process, requiring ample time and training. Optimal training is based on acquiring knowledge and psychomotor and cognitive skills. Practicing surgical skills is one of the most crucial tasks for both the novice surgeon learning new procedures and surgeons already in practice learning new techniques. Focus is placed on teaching traditional technical skills, but the importance of cognitive skills cannot be underestimated. Cognitive skills allow recognizing environmental cues to improve technical performance including situational awareness, mental readiness, risk assessment, anticipating problems, decision-making, adaptation, and flexibility, and may also accelerate the trainee's understanding of a procedure, formalize the steps being practiced, and reduce the overall training time to become technically proficient. The introduction and implementation of the transanal total mesorectal excision (TaTME) into practice may be the best demonstration of this new model of teaching and training, including pre-training, course attendance, and post-course guidance on technical and cognitive skills. To date, the TaTME framework has been the ideal model for structured training to ensure safe implementation. Further development of metrics to grade successful learning and assessment of long term outcomes with the new pathway will confirm the success of this training model. Copyright © 2018 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. All rights reserved.

Consumer behaviors towards ready-to-eat foods based on food-related lifestyles in Korea

PubMed Central

Bae, Hyun-Joo; Chae, Mi-Jin

2010-01-01

The purpose of this study was to examine consumers' behaviors toward ready-to-eat foods and to develop ready-to-eat food market segmentation in Korea. The food-related lifestyle and purchase behaviors of ready-to-eat foods were evaluated using 410 ready-to-eat food consumers in the Republic of Korea. Four factors were extracted by exploratory factor analysis (health-orientation, taste-orientation, convenience-orientation, and tradition-orientation) to explain the ready-to eat food consumers' food-related lifestyles. The results of cluster analysis indicated that "tradition seekers" and "convenience seekers" should be regarded as the target segments. Chi-square tests and t-tests of the subdivided groups showed there were significant differences across marital status, education level, family type, eating-out expenditure, place of purchase, and reason for purchase. In conclusion, the tradition seekers consumed more ready-to-eat foods from discount marts or specialty stores and ate them between meals more often than the convenience seekers. In contrast, the convenience seekers purchased more ready-to-eat foods at convenience stores and ate them as meals more often than the tradition seekers. These findings suggest that ready-to-eat food market segmentation based on food-related lifestyles can be applied to develop proper marketing strategies. PMID:20827350

Consumer behaviors towards ready-to-eat foods based on food-related lifestyles in Korea.

PubMed

Bae, Hyun-Joo; Chae, Mi-Jin; Ryu, Kisang

2010-08-01

The purpose of this study was to examine consumers' behaviors toward ready-to-eat foods and to develop ready-to-eat food market segmentation in Korea. The food-related lifestyle and purchase behaviors of ready-to-eat foods were evaluated using 410 ready-to-eat food consumers in the Republic of Korea. Four factors were extracted by exploratory factor analysis (health-orientation, taste-orientation, convenience-orientation, and tradition-orientation) to explain the ready-to eat food consumers' food-related lifestyles. The results of cluster analysis indicated that "tradition seekers" and "convenience seekers" should be regarded as the target segments. Chi-square tests and t-tests of the subdivided groups showed there were significant differences across marital status, education level, family type, eating-out expenditure, place of purchase, and reason for purchase. In conclusion, the tradition seekers consumed more ready-to-eat foods from discount marts or specialty stores and ate them between meals more often than the convenience seekers. In contrast, the convenience seekers purchased more ready-to-eat foods at convenience stores and ate them as meals more often than the tradition seekers. These findings suggest that ready-to-eat food market segmentation based on food-related lifestyles can be applied to develop proper marketing strategies.

Nuclear thermal propulsion transportation systems for lunar/Mars exploration

NASA Technical Reports Server (NTRS)

Clark, John S.; Borowski, Stanley K.; Mcilwain, Melvin C.; Pellaccio, Dennis G.

1992-01-01

Nuclear thermal propulsion technology development is underway at NASA and DoE for Space Exploration Initiative (SEI) missions to Mars, with initial near-earth flights to validate flight readiness. Several reactor concepts are being considered for these missions, and important selection criteria will be evaluated before final selection of a system. These criteria include: safety and reliability, technical risk, cost, and performance, in that order. Of the concepts evaluated to date, the Nuclear Engine for Rocket Vehicle Applications (NERVA) derivative (NDR) is the only concept that has demonstrated full power, life, and performance in actual reactor tests. Other concepts will require significant design work and must demonstrate proof-of-concept. Technical risk, and hence, development cost should therefore be lowest for the concept, and the NDR concept is currently being considered for the initial SEI missions. As lighter weight, higher performance systems are developed and validated, including appropriate safety and astronaut-rating requirements, they will be considered to support future SEI application. A space transportation system using a modular nuclear thermal rocket (NTR) system for lunar and Mars missions is expected to result in significant life cycle cost savings. Finally, several key issues remain for NTR's, including public acceptance and operational issues. Nonetheless, NTR's are believed to be the 'next generation' of space propulsion systems - the key to space exploration.

Methodology to Calculate the ACE and HPQ Metrics Used in the Wave Energy Prize

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, Frederick R; Weber, Jochem W; Jenne, Dale S

The U.S. Department of Energy's Wave Energy Prize Competition encouraged the development of innovative deep-water wave energy conversion technologies that at least doubled device performance above the 2014 state of the art. Because levelized cost of energy (LCOE) metrics are challenging to apply equitably to new technologies where significant uncertainty exists in design and operation, the prize technical team developed a reduced metric as proxy for LCOE, which provides an equitable comparison of low technology readiness level wave energy converter (WEC) concepts. The metric is called 'ACE' which is short for the ratio of the average climate capture width tomore » the characteristic capital expenditure. The methodology and application of the ACE metric used to evaluate the performance of the technologies that competed in the Wave Energy Prize are explained in this report.« less

Deep fiber networks: new ready-to-deploy architectures yield technical and economic benefits

NASA Astrophysics Data System (ADS)

Sipes, Donald L., Jr.; Loveless, Robert

2001-07-01

The advent of digital technology in HFC networks has opened up a myriad of opportunities for MSOs. The introduction of these advanced services comes at a cost: namely, the need for increased capacity; and especially increased reusable bandwidth. In HFC networks all services are ostensibly broadcast: the prime difference between services being the footprint over which these services are broadcast. Channel lineups for broadcast video services typically cover the largest are. Advertising zones are typically second, usually on the order of a typical 20K home hub. For initial penetrations for high speed data services such as cable modems, a typical hub site will be divided into several sectors using a single 6 MHz channel. Telephony services are broadcast over the smallest area, typically a 6 MHz channel for each node. Naturally as penetration of these services increase, the broadcast area for each will also decrease.

Understanding Risk Tolerance and Building an Effective Safety Culture

NASA Technical Reports Server (NTRS)

Loyd, David

2018-01-01

Estimates range from 65-90 percent of catastrophic mishaps are due to human error. NASA's human factors-related mishaps causes are estimated at approximately 75 percent. As much as we'd like to error-proof our work environment, even the most automated and complex technical endeavors require human interaction... and are vulnerable to human frailty. Industry and government are focusing not only on human factors integration into hazardous work environments, but also looking for practical approaches to cultivating a strong Safety Culture that diminishes risk. Industry and government organizations have recognized the value of monitoring leading indicators to identify potential risk vulnerabilities. NASA has adapted this approach to assess risk controls associated with hazardous, critical, and complex facilities. NASA's facility risk assessments integrate commercial loss control, OSHA (Occupational Safety and Health Administration) Process Safety, API (American Petroleum Institute) Performance Indicator Standard, and NASA Operational Readiness Inspection concepts to identify risk control vulnerabilities.

Semi-autonomous inline water analyzer: design of a common light detector for bacterial, phage, and immunological biosensors.

PubMed

Descamps, Elodie C T; Meunier, Damien; Brutesco, Catherine; Prévéral, Sandra; Franche, Nathalie; Bazin, Ingrid; Miclot, Bertrand; Larosa, Philippe; Escoffier, Camille; Fantino, Jean-Raphael; Garcia, Daniel; Ansaldi, Mireille; Rodrigue, Agnès; Pignol, David; Cholat, Pierre; Ginet, Nicolas

2017-01-01

The use of biosensors as sensitive and rapid alert systems is a promising perspective to monitor accidental or intentional environmental pollution, but their implementation in the field is limited by the lack of adapted inline water monitoring devices. We describe here the design and initial qualification of an analyzer prototype able to accommodate three types of biosensors based on entirely different methodologies (immunological, whole-cell, and bacteriophage biosensors), but whose responses rely on the emission of light. We developed a custom light detector and a reaction chamber compatible with the specificities of the three systems and resulting in statutory detection limits. The water analyzer prototype resulting from the COMBITOX project can be situated at level 4 on the Technology Readiness Level (TRL) scale and this technical advance paves the way to the use of biosensors on-site.

Career Profile: Flight Operations Engineer (Airborne Science) Robert Rivera

NASA Image and Video Library

2015-05-14

Operations engineers at NASA's Armstrong Flight Research Center help to advance science, technology, aeronautics, and space exploration by managing operational aspects of a flight research project. They serve as the governing authority on airworthiness related to the modification, operation, or maintenance of specialized research or support aircraft so those aircraft can be flown safely without jeopardizing the pilots, persons on the ground or the flight test project. With extensive aircraft modifications often required to support new research and technology development efforts, operations engineers are key leaders from technical concept to flight to ensure flight safety and mission success. Other responsibilities of an operations engineer include configuration management, performing systems design and integration, system safety analysis, coordinating flight readiness activities, and providing real-time flight support. This video highlights the responsibilities and daily activities of NASA Armstrong operations engineer Robert Rivera during the preparation and execution of the Global Hawk airborne missions under NASA's Science Mission Directorate.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. Through Building America research and other innovative programs throughout the country, many of the technical challenges to building to the ZERH standard have been addressed. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, CA. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovationmore » worked with Mutual Housing throughout the project. The case study discusses challenges encountered, lessons learned, and how obstacles were overcome. An objective of this project was to gain a highly visible foothold for residential buildings built to the DOE ZERH specification that can be used to encourage participation by other California builders.« less

Modelling plankton ecosystems in the meta-omics era. Are we ready?

PubMed

Stec, Krzysztof Franciszek; Caputi, Luigi; Buttigieg, Pier Luigi; D'Alelio, Domenico; Ibarbalz, Federico Matias; Sullivan, Matthew B; Chaffron, Samuel; Bowler, Chris; Ribera d'Alcalà, Maurizio; Iudicone, Daniele

2017-04-01

Recent progress in applying meta-omics approaches to the study of marine ecosystems potentially allows scientists to study the genetic and functional diversity of plankton at an unprecedented depth and with enhanced precision. However, while a range of persistent technical issues still need to be resolved, a much greater obstacle currently preventing a complete and integrated view of the marine ecosystem is the absence of a clear conceptual framework. Herein, we discuss the knowledge that has thus far been derived from conceptual and statistical modelling of marine plankton ecosystems, and illustrate the potential power of integrated meta-omics approaches in the field. We then propose the use of a semantic framework is necessary to support integrative ecological modelling in the meta-omics era, particularly when having to face the increased interdisciplinarity needed to address global issues related to climate change. Copyright © 2017. Published by Elsevier B.V.

College Readiness Standards[TM] for EXPLORE[R], PLAN[R], and the ACT[R]: Includes Ideas for Progress

ERIC Educational Resources Information Center

ACT, Inc., 2008

2008-01-01

At the foundation of the Educational Planning and Assessment System (EPAS) programs are ACT's College Readiness Standards. The Standards offer learning strategies that are likely to help students meet state standards and acquire the more advanced concepts associated with higher EPAS test scores and, more importantly, increased college readiness.…

The Early Development Instrument: Translating School Readiness Assessment into Community Actions and Policy Planning

ERIC Educational Resources Information Center

Guhn, Martin; Janus, Magdalena; Hertzman, Clyde

2007-01-01

This invited special issue of "Early Education and Development" presents research related to the Early Development Instrument (EDI; Janus & Offord, 2007), a community tool to assess children's school readiness at a population level. In this editorial introduction, we first sketch out recent trends in school readiness research that call for a…

Promoting School Readiness in the Context of Socio-Economic Adversity: Associations with Parental Demoralization and Support for Learning

ERIC Educational Resources Information Center

Okado, Yuko; Bierman, Karen L.; Welsh, Janet A.

2014-01-01

Background: Existing research suggests that parenting stress and demoralization, as well as provision of learning activities at home, significantly affect child school readiness. However, the degree to which these dimensions of parenting uniquely influence child school readiness remains unclear. Objective: This study tested the hypothesis that…

Prediction of Academic Achievement with the McCarthy Screening Test and Metropolitan Readiness Test.

ERIC Educational Resources Information Center

Gullo, Dominic F.; And Others

1984-01-01

Examined the efficacy of the McCarthy Screening Test (MST) and Metropolitan Readiness Test (MRT) to predict academic readiness after kindergarten and achievement at the end of first grade. The MST significantly predicted children's scores of the MRT and SFAT. Additionally, the MRT was a significant predictor of the SFAT. (JAC)

Minnesota School Readiness Year Two Study: Developmental Assessment at Kindergarten Entrance, Fall 2003

ERIC Educational Resources Information Center

Minnesota Department of Education, 2004

2004-01-01

A large and growing body of research supports the critical relationship between early childhood experiences and successful life-long outcomes. Assessing the readiness of children as they enter school is a high priority. This report describes findings from Year Two of the assessment of school readiness with a larger random sample of children…

Kindergarten Readiness: Using Brigance Data to Prepare Students for School Entry

ERIC Educational Resources Information Center

Shires, Michael J.

2017-01-01

This study utilizes the Brigance screener historical data to make a prediction of which prior settings students will come to kindergarten not-ready. It also uses prior settings data to look at subcategories of the composite score to inform an intervention plan to combat kindergarten not-ready scores. The research concluded that there is a…

46 CFR 309.204 - Proof of loss.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of consumable stores on board at the time the vessel was ready to sail, determined by multiplying the...) The average daily consumption cost times the number of days from the date the vessel was ready to sail... time the vessel was ready to sail, determined by multiplying the agreed cost for one man per day by the...

46 CFR 309.204 - Proof of loss.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of consumable stores on board at the time the vessel was ready to sail, determined by multiplying the...) The average daily consumption cost times the number of days from the date the vessel was ready to sail... time the vessel was ready to sail, determined by multiplying the agreed cost for one man per day by the...

EVA tools and equipment reference book

NASA Technical Reports Server (NTRS)

Fullerton, R. K.

1993-01-01

This document contains a mixture of tools and equipment used throughout the space shuttle-based extravehicular activity (EVA) program. Promising items which have reached the prototype stage of development are also included, but should not be considered certified ready for flight. Each item is described with a photo, a written discussion, technical specifications, dimensional drawings, and points of contact for additional information. Numbers on the upper left-hand corner of each photo may be used to order specific pictures from NASA and contractor photo libraries. Points of contact were classified as either operational or technical. An operational contact is an engineer from JSC Mission Operations Directorate who is familiar with the basic function and on-orbit use of the tool. A technical contact would be the best source of detailed technical specifications and is typically the NASA subsystem manager. The technical information table for each item uses the following terms to describe the availability or status of each hardware item: Standard - Flown on every mission as standard manifest; Flight specific - Potentially available for flight, not flown every mission (flight certification cannot be guaranteed and recertification may be required); Reference only - Item no longer in active inventory or not recommended for future use, some items may be too application-specific for general use; and Developmental - In the prototype stage only and not yet available for flight. The current availability and certification of any flight-specific tool should be verified with the technical point of contact. Those tools built and fit checked for Hubble Space Telescope maintenance are program dedicated and are not available to other customers. Other customers may have identical tools built from the existing, already certified designs as an optional service.

Objectives for the Space Infrared Telescope Facility

NASA Technical Reports Server (NTRS)

Spehalski, Richard J.; Werner, Michael W.

1991-01-01

The Space Infrared Telescope Facility (SIRFT) is a one-meter-class, liquid-helium-cooled, earth-orbiting astronomical observatory that will be the infrared component of NASA's family of Great Observatories. SIRTF will investigate numerous scientific areas including formation and evolution of galaxies, stars, and other solar systems; supernovae; phenomena in our own solar system; and, undoubtedly, topics that are outside today's scientific domain. SIRTF's three instruments will permit imaging at all infrared wavelengths from 1.8 to 1200 microns and spectroscopy from 2.5 to 200 microns. The observatory will operate at an altitude of 100,000 km where it will achieve a five-year lifetime and operate with better than 80 percent on-target efficiency. The scientific importance and technical and programmatic readiness of SIRTF has been recognized by the 1991 report of the National Research Council's Astronomy and Astrophysics Survey Committee which recently identified SIRTF as the highest priority major new initiative in all of astronomy for the coming decade.

Recent Progress in Engine Noise Reduction Technologies

NASA Technical Reports Server (NTRS)

Huff, Dennis; Gliebe, Philip

2003-01-01

Highlights from NASA-funded research over the past ten years for aircraft engine noise reduction are presented showing overall technical plans, accomplishments, and selected applications to turbofan engines. The work was sponsored by NASA's Advanced Subsonic Technology (AST) Noise Reduction Program. Emphasis is given to only the engine noise reduction research and significant accomplishments that were investigated at Technology Readiness Levels ranging from 4 to 6. The Engine Noise Reduction sub-element was divided into four work areas: source noise prediction, model scale tests, engine validation, and active noise control. Highlights from each area include technologies for higher bypass ratio turbofans, scarf inlets, forward-swept fans, swept and leaned stators, chevron/tabbed nozzles, advanced noise prediction analyses, and active noise control for fans. Finally, an industry perspective is given from General Electric Aircraft Engines showing how these technologies are being applied to commercial products. This publication contains only presentation vu-graphs from an invited lecture given at the 41st AIAA Aerospace Sciences Meeting, January 6-9, 2003.

After the War: Stories of the women who did scientific and technical work on the Manhattan Project

NASA Astrophysics Data System (ADS)

Howes, Ruth

2014-03-01

When the Japanese surrendered on September 2, 1945, the crash research program of the Manhattan Project abruptly ended although the labs continued to produce nuclear weapons to supplement the single implosion bomb ready for deployment. The older (over 25) members of the scientific staff at Los Alamos and other Manhattan Project sites were eager to return to jobs at universities and in industry, and the younger staff members wanted to finish graduate degrees. Women were no exception to this rule. In addition, the government launched a huge propaganda effort to persuade women to leave the workforce and make jobs available for returning GIs. Doors that had been open to women scientists and technicians abruptly closed as the economy returned to a peacetime footing. Stories of the women scientists and technicians of the Manhattan Project illustrate the strategies they used to meet these challenges as well as their remarkable determination to continue their careers.

NASA's Space Launch System: Momentum Builds Towards First Launch

NASA Technical Reports Server (NTRS)

May, Todd; Lyles, Garry

2014-01-01

NASA's Space Launch System (SLS) is gaining momentum programmatically and technically toward the first launch of a new exploration-class heavy lift launch vehicle for international exploration and science initiatives. The SLS comprises an architecture that begins with a vehicle capable of launching 70 metric tons (t) into low Earth orbit. Its first mission will be the launch of the Orion Multi-Purpose Crew Vehicle (MPCV) on its first autonomous flight beyond the Moon and back. SLS will also launch the first Orion crewed flight in 2021. SLS can evolve to a 130-t lift capability and serve as a baseline for numerous robotic and human missions ranging from a Mars sample return to delivering the first astronauts to explore another planet. Managed by NASA's Marshall Space Flight Center, the SLS Program formally transitioned from the formulation phase to implementation with the successful completion of the rigorous Key Decision Point C review in 2014. At KDP-C, the Agency Planning Management Council determines the readiness of a program to go to the next life-cycle phase and makes technical, cost, and schedule commitments to its external stakeholders. As a result, the Agency authorized the Program to move forward to Critical Design Review, scheduled for 2015, and a launch readiness date of November 2018. Every SLS element is currently in testing or test preparations. The Program shipped its first flight hardware in 2014 in preparation for Orion's Exploration Flight Test-1 (EFT-1) launch on a Delta IV Heavy rocket in December, a significant first step toward human journeys into deep space. Accomplishments during 2014 included manufacture of Core Stage test articles and preparations for qualification testing the Solid Rocket Boosters and the RS-25 Core Stage engines. SLS was conceived with the goals of safety, affordability, and sustainability, while also providing unprecedented capability for human exploration and scientific discovery beyond Earth orbit. In an environment of economic challenges, the nationwide SLS team continues to meet ambitious budget and schedule targets through the studied use of hardware, infrastructure, and workforce investments the United States has already made in the last half century, while selectively using new technologies for design, manufacturing, and testing, as well as streamlined management approaches that have increased decision velocity and reduced associated costs. This paper will summarize recent SLS Program technical accomplishments, as well as the challenges and opportunities ahead for the most powerful and capable launch vehicle in history.

Treatment Readiness as a Determinant of Treatment Participation in a Prison-Based Rehabilitation Program: An Exploratory Study.

PubMed

Bosma, Anouk Q; Kunst, Maarten J J; Dirkzwager, Anja J E; Nieuwbeerta, Paul

2017-06-01

The current study had three aims. First, it measured treatment readiness among offenders who entered the Prevention of Recidivism program. This is a prison-based rehabilitation program in the Netherlands that aims to lower re-offending rates among offenders with a prison sentence of at least for months and that is carried out during the final months of incarceration. Second, the study evaluated whether treatment readiness was associated with treatment participation. Third, the study examined whether treatment readiness measured with a validated instrument predicted treatment participation above and beyond a clinical assessment of treatment readiness, currently used as a criterion to include offenders in rehabilitation programs. To address these aims, data were used from the fourth wave of a research project studying the effects of imprisonment on the life of detainees in the Netherlands. Results indicated that treatment readiness as measured with a validated instrument was a significant predictor of treatment participation. Also, the current study showed that treatment readiness measured with a validated instrument improved the prediction of treatment participation above and beyond a clinical assessment of treatment readiness. Outcomes were discussed in light of study limitations and implications.

Micronutrient deficiencies in the elderly - could ready meals be part of the solution?

PubMed

Hoffman, Richard

2017-01-01

Micronutrient deficiencies contribute to many age-related disorders. One group at particular risk of micronutrient deficiencies is the elderly. Many elderly, such as the frail and those living in institutions, rely on ready meals of variable, often poor, nutritional quality for a significant part of their daily nutritional needs. New policies are needed to ensure that micronutrients (vitamins and minerals) and phytochemicals of known nutritional value are retained during the manufacture of ready meals. This together with increased awareness of the importance of micronutrients for health, and simple, clear labelling of the micronutrient content of ready meals would help in the choice of healthier products. Professionally prepared ready meals monitored by nutritionists and dietitians can help achieve these goals so that ready meals become part of the solution to poor nutrition in the elderly, rather than being viewed as part of the problem.

Analysis of user readiness toward ICT usage at small medium enterprise in south tangerang

NASA Astrophysics Data System (ADS)

Napitupulu, D.; Syafrullah, M.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

Utilization of Information and Communication Technology (ICT) is still relatively low in the level of SMEs due to various limitations ranging from access to capital, till the marketing network. ICT is present to provide the ability for SMEs in improving the benefits and competitive advantage of the organization. This study aims to determine the level of readiness of SMEs in utilizing technology, especially ICT. The methodology used is a survey to see the technology readiness of 107 SMEs in South Tangerang selected by purposive sampling. The approach used is TRI (Technology Readiness Index) which is the individual perception of technology based on four criteria that is optimism, innovativeness, discomfort and insecurity. The results showed that the optimism and innovativeness variables significantly positively influence the technology readiness while the variables of discomfort and insecurity also significantly positively influence the readiness of ICT.

Science and technology integration for increased human potential and societal outcomes.

PubMed

Roco, Mihail C

2004-05-01

Unifying science based on the material unity of nature at the nanoscale provides a new foundation for knowledge, innovation, and integration of technology. Revolutionary and synergistic advances at the interfaces between previously separated fields of science, engineering and areas of relevance are ready to create nano-bio-info-cogno (NBIC) transforming tools. Developments in systems approach, mathematics, and computation in conjunction with NBIC allow us to understand the natural world and scientific research as closely coupled, complex, hierarchical entities. At this unique moment of scientific and technical achievement, improvement of human performance at individual and group levels, as well as development of suitable revolutionary products, becomes possible and these are primary goals for converging new technologies. NBIC addresses long-term advances in key areas of human activity, including working, learning, aging, group interaction, organizations, and human evolution ((Roco and Bainbridge, 2003)). Fundamentally new tools, technologies, and products will be integrated into individual and social human architecture. This introductory chapter of the Annals outlines research and education trends, funding activities, and the potential of development of revolutionary products and services.

Beyond signal functions in global obstetric care: Using a clinical cascade to measure emergency obstetric readiness

PubMed Central

Dettinger, Julia; Calkins, Kimberly; Kibore, Minnie; Gachuno, Onesmus; Walker, Dilys

2018-01-01

Background Globally, the rate of reduction in delivery-associated maternal and perinatal mortality has been slow compared to improvements in post-delivery mortality in children under five. Improving clinical readiness for basic obstetric emergencies is crucial for reducing facility-based maternal deaths. Emergency readiness is commonly assessed using tracers derived from the maternal signal functions model. Objective-method We compare emergency readiness using the signal functions model and a novel clinical cascade. The cascades model readiness as the proportion of facilities with resources to identify the emergency (stage 1), treat it (stage 2) and monitor-modify therapy (stage 3). Data were collected from 44 Kenyan clinics as part of an implementation trial. Findings Although most facilities (77.0%) stock maternal signal function tracer drugs, far fewer have resources to practically identify and treat emergencies. In hypertensive emergencies for example, 38.6% of facilities have resources to identify the emergency (Stage 1 readiness, including sphygmomanometer, stethoscope, urine collection device, protein test). 6.8% have the resources to treat the emergency (Stage 2, consumables (IV Kit, fluids), durable goods (IV pole) and drugs (magnesium sulfate and hydralazine). No facilities could monitor or modify therapy (Stage 3). Across five maternal emergencies, the signal functions overestimate readiness by 54.5%. A consistent, step-wise pattern of readiness loss across signal functions and care stage emerged and was profoundly consistent at 33.0%. Significance Comparing estimates from the maternal signal functions and cascades illustrates four themes. First, signal functions overestimate practical readiness by 55%. Second, the cascade’s intuitive indicators can support cross-sector health system or program planners to more precisely measure and improve emergency care. Third, adding few variables to existing readiness inventories permits step-wise modeling of readiness loss and can inform more precise interventions. Fourth, the novel aggregate readiness loss indicator provides an innovative and intuitive approach for modeling health system emergency readiness. Additional testing in diverse contexts is warranted. PMID:29474397

Status of NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Honeycutt, John; Lyles, Garry

2016-01-01

NASA's Space Launch System (SLS) continued to make significant progress in 2015 and 2016, completing hardware and testing that brings NASA closer to a new era of deep space exploration. Programmatically, SLS completed Critical Design Review (CDR) in 2015. A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just five years after program start, every major element has amassed development and flight hardware and completed key tests that will lead to an accelerated pace of manufacturing and testing in 2016 and 2017. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The existing fleet of RS-25 engines is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with a fifth propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100t and, ultimately, to 130t. Among the program's major 2015-2016 accomplishments were two booster qualification hotfire tests, a series of RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the completion of welding for all qualification and flight EM-1 core stage components and testing of flight avionics, completion of core stage structural test stands, casting of the EM-1 solid rocket motors, additional testing of RS-25 engines and flight engine controllers This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Status of NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Honeycutt, John; Cook, Jerry; Lyles, Garry

2016-01-01

NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100 metric tons and, ultimately, to 130 metric tons. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Status of NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Lyles, Garry

2016-01-01

NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100t and, ultimately, to 130t. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

The Influence of Learner Readiness on Student Satisfaction and Academic Achievement in an Online Program at Higher Education

ERIC Educational Resources Information Center

Kirmizi, Özkan

2015-01-01

The purpose of this study was to measure the self-perceptions of distance education learners in terms of learner readiness and to determine the predictors of satisfaction and success in distance education. Learner readiness consists of five sub-dimensions: (1) computer/internet self-efficacy, (2) self-directed learning, (3) learner control, (4)…

Relationships between Self-Regulating Behaviors and Predictor Exam Scores for Senior Nursing Students

ERIC Educational Resources Information Center

Gillespie, Maria

2012-01-01

Low pass rates on the National Council Licensure Exam for Registered Nurses have directed nursing faculty to examine how to predict the readiness of the nursing student. Exit exam testing that predicts readiness has become one way to assess the nursing student's readiness. Nursing students at the research site's school of nursing are…

An Analysis of Organizational Readiness at Anniston Army Depot for Information Technology Change

DTIC Science & Technology

2008-12-01

13 1. History of Readiness for Change Literature ...................................13 2. Research...the way IT change affects them individually and collectively are the focus of this thesis project. The history of the SDS and the LMP provided in...recommendations based on the survey instrument. 13 II. LITERATURE REVIEW A. INTRODUCTION 1. History of Readiness for Change Literature An

76 FR 38618 - Proposed Information Collection; Comment Request; StormReadyTM

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... Collection; Comment Request; StormReady\\TM\\, TsunamiReady\\TM\\ and StormReady/TsunamiReady\\TM\\ Application... information collection. The StormReady Program, like the TsunamiReady and StormReady/TsunamiReady programs... certain guidelines that qualify them for StormReady recognition. The full StormReady recognition is not...

Policy and Technology Readiness: Engaging the User and Developer Community to Develop a Research Roadmap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, Jarrod; Barr, Jonathan L.; Burtner, Edwin R.

A key challenge for research roadmapping in the crisis response and management domain is articulation of a shared vision that describes what the future can and should include. Visioning allows for far-reaching stakeholder engagement that can properly align research with stakeholders needs. Engagement includes feedback from researchers, policy makers, general public, and end-users on technical and non-technical factors. This work articulates a process and framework for the construction and maintenance of a stakeholder-centric research vision and roadmap in the emergency management domain. This novel roadmapping process integrates three pieces: analysis of the research and technology landscape, visioning, and stakeholder engagement.more » Our structured engagement process elicits research foci for the roadmap based on relevance to stakeholder mission, identifies collaborators, and builds consensus around the roadmap priorities. We find that the vision process and vision storyboard helps SMEs conceptualize and discuss a technology's strengths, weaknesses, and alignment with needs« less

Airframe Research and Technology for Hypersonic Airbreathing Vehicles

NASA Technical Reports Server (NTRS)

Glass, David E.; Merski, N. Ronald; Glass, Christopher E.

2002-01-01

The Hypersonics Investment Area (HIA) within NASA's Advanced Space Transportation Program (ASTP) has the responsibility to develop hypersonic airbreathing vehicles for access to space. The Airframe Research and Technology (AR and T) Project, as one of six projects in the HIA, will push the state-of-the-art in airframe and vehicle systems for low-cost, reliable, and safe space transportation. The individual technologies within the project are focused on advanced, breakthrough technologies in airframe and vehicle systems and cross-cutting activities that are the basis for improvements in these disciplines. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas that will be addressed by the project include analysis and design tools, integrated vehicle health management (IVHM), composite (polymer, metal, and ceramic matrix) materials development, thermal/structural wall concepts, thermal protection systems, seals, leading edges, aerothermodynamics, and airframe/propulsion flowpath technology. Each of the technical areas or sub-projects within the Airframe R and T Project is described in this paper.

Modeling the Technological Process for Harvesting of Agricultural Produce

NASA Astrophysics Data System (ADS)

Shepelev, S. D.; Shepelev, V. D.; Almetova, Z. V.; Shepeleva, N. P.; Cheskidov, M. V.

2018-01-01

The efficiency and the parameters of harvesting as a technological process being substantiated make it possible to reduce the cost of production and increase the profit of enterprises. To increase the efficiency of combine harvesters when the level of technical equipment declines is possible due to their efficient operating modes within daily and every season. Therefore, the correlation between the operational daily time and the seasonal load of combine harvesters is found, with the increase in the seasonal load causing the prolonged duration of operational daily time for harvesters being determined. To increase the efficient time of the seasonal load is possible due to a reasonable ratio of crop varieties according to their ripening periods, the necessary quantity of machines thereby to be reduced up to 40%. By timing and field testing the operational factor of the useful shift time of combine harvesters and the efficient modes of operating machines are defined, with the alternatives for improving the technical readiness of combine harvesters being identified.

Can Diversity in the Undergraduate Engineering Population BE Enhanced Through Curricular Change?

NASA Astrophysics Data System (ADS)

Busch-Vishniac, Ilene J.; Jarosz, Jeffrey P.

The lack of diversity in the engineering workforce is a persistent problem, with no signs of pending improvement. The situation continues despite a serious technical workforce shortage in the United States. Efforts to promote diversity in the student body in U.S. engineering schools, such as industrial partnerships, academic services, and the establishment of social networks, have produced modest gains. The authors intend to pursue a distinctly different approach to the problem of encouraging a diverse engineering student population, one that focuses on the curriculum. This study reviews curricular innovations attempted to date as a basis for rebuilding the undergraduate engineering curriculum from the ground up. The goal is to produce a curriculum that retains the salient technical material but enhances the link between fundamentals and applications, reduces critical path lengths in the course sequence, introduces team experiences into all courses, and creates an atmosphere of inclusion rather than exclusion. The new curriculum will require trial, assessment, and revision before it is ready for adoption.

Icelandic occupational therapists' attitudes towards educational issues.

PubMed

Asmundsd ttir, ELIN EBBA; Kaplan, SUSAN

2001-01-01

The purpose of this study was to assess the readiness of occupational therapists in Iceland to accept a professional as opposed to a technical view of the profession. Most Icelandic occupational therapists were educated in other countries, with little emphasis on liberal arts, sciences and research. The first Icelandic occupational therapy programme, a university-level programme, was founded in 1997. All Icelandic occupational therapists were surveyed. Eighty-seven questionnaires were sent out and 80 (92%) were returned and used for statistical analysis. The results of the study showed that Icelandic occupational therapists valued academic skills over technical skills, emphasizing occupational therapy theory unique to the profession and research to validate practice. More recognition among other health professionals was considered the most needed change in the profession. The results of the study showed that the clinicians' attitudes confirmed in general what is emphasized in the curriculum and in students' fieldwork. Further research is needed to explore whether the Icelandic occupational therapy profession succeeds in promoting research and recognition by other health professions.

Readiness of Wait-Listed Black Patients to Pursue Live Donor Kidney Transplantation

PubMed Central

Rodrigue, James R.; Paek, Matthew J.; Egbuna, Ogo; Waterman, Amy D.; Schold, Jesse D.; Pavlakis, Martha; Mandelbrot, Didier A.

2015-01-01

Context For adults with end-stage kidney disease, live donor kidney transplantation (LDKT) yields superior outcomes over long-term dialysis and deceased donor kidney transplantation. However, blacks receive LDKT at a much lower rate than adults of any other race or ethnicity. Objective To examine the LDKT readiness stage of blacks on the transplant waiting list and its association with LDKT knowledge, concerns, and willingness. Design Cross-sectional analysis of baseline data from a randomized controlled trial to improve knowledge and reduce concerns about LDKT. Patients and Setting One hundred fifty-two black patients on the kidney transplant waiting list at a single transplant center in the northeastern United States. Main Outcomes LDKT readiness stage, knowledge, concerns, and willingness to talk to others about living donation. Results Sixty percent of patients were not considering or not yet ready to pursue LDKT, while only 11% had taken action to talk to family members or friends about the possibility of living kidney donation. Patients in later stages of LDKT readiness (i.e., had talked to others about donation or were preparing to do so) had significantly more knowledge (p<0.001), fewer concerns (p=0.002), and more willingness (p=0.001) to talk to others about living donation than those in earlier readiness stages. Conclusions The large percentage of blacks who are in the earlier stages of LDKT readiness may account for the low rate of LDKT in this patient population at our transplant center. Innovative and tailored LDKT educational strategies for black patients are needed to help reduce racial disparities in LDKT. PMID:25488559

Evaluation of motivationally tailored vs. standard self-help physical activity interventions at the workplace.

PubMed

Marcus, B H; Emmons, K M; Simkin-Silverman, L R; Linnan, L A; Taylor, E R; Bock, B C; Roberts, M B; Rossi, J S; Abrams, D B

1998-01-01

This study compares the efficacy of a self-help intervention tailored to the individual's stage of motivational readiness for exercise adoption with a standard self-help exercise promotion intervention. Interventions were delivered at baseline and 1 month; assessments were collected at baseline and 3 months. Eleven worksites participating in the Working Healthy Research Trial. Participants (n = 1559) were a subsample of employees at participating worksites, individually randomized to one of two treatment conditions. Printed self-help exercise promotion materials either (1) matched to the individual's stage of motivational readiness for exercise adoption (motivationally tailored), or (2) standard materials (standard). Measures of stage of motivational readiness for exercise and items from the 7-Day Physical Activity Recall. Among intervention completers (n = 903), chi-square analyses showed that, compared to the standard intervention, those receiving the motivationally tailored intervention were significantly more likely to show increases (37% vs. 27%) and less likely to show either no change (52% vs. 58%) or regression (11% vs. 15%) in stage of motivational readiness. Multivariate analyses of variance showed that changes in stage of motivational readiness were significantly associated with changes in self-reported time spent in exercise. This is the first prospective, randomized, controlled trial demonstrating the efficacy of a brief motivationally tailored intervention compared to a standard self-help intervention for exercise adoption. These findings appear to support treatment approaches that tailor interventions to the individual's stage of motivational readiness for exercise adoption.

Consumption of ready-made meals and increased risk of obesity: findings from the Observation of Cardiovascular Risk Factors in Luxembourg (ORISCAV-LUX) study.

PubMed

Alkerwi, Ala'a; Crichton, Georgina E; Hébert, James R

2015-01-28

The consumption of ready-made meals, such as pre-packaged dishes, available at grocery stores and fast-food restaurants, is a habit related to our modern fast-paced lives. No study has examined the association of daily ready-made meal consumption with diet quality or health-related outcomes. The present study aimed to investigate the association between self-reported ready-made meal consumption and diet quality, as measured by compliance with dietary recommendations and with a set of adiposity measures, in a nationally representative sample of 1352 subjects, aged 18-69 years, participating in the nationwide population-based ORISCAV-LUX (Observation of Cardiovascular Risk Factors in Luxembourg) survey. The daily consumption of ready-made meals was calculated as follows: frequency of consumption × portion size × number of portions consumed. The sum of the daily consumption values of the eleven pre-packaged dishes included in the FFQ represented the total daily consumption of ready-made meals (g/d) for each participant. About 97% of the participants reported daily consumption of ready-made meals. The intake was highly prevalent in men living alone and varied according to education level. Ready-made meal consumption provided >7% of total daily energy. The fractions (%) of macro- and micronutrients derived from daily consumption of ready-made meals varied from 10% for total cholesterol to 0.65% for total fibre. Increased consumption of ready-made meals was found to be independently associated with abdominal obesity. On controlling for age, sex, socio-economic status and lifestyle factors, daily consumption of ready-made meals was found to be associated with higher energy intake and with poor compliance with national nutritional recommendations, and hence it could plausibly increase the risk of central obesity and fat deposition.

Parent Involvement in the Getting Ready for School Intervention Is Associated With Changes in School Readiness Skills.

PubMed

Marti, Maria; Merz, Emily C; Repka, Kelsey R; Landers, Cassie; Noble, Kimberly G; Duch, Helena

2018-01-01

The role of parent involvement in school readiness interventions is not well-understood. The Getting Ready for School (GRS) intervention is a novel program that has both home and school components and aims to improve early literacy, math, and self-regulatory skills in preschool children from socioeconomically disadvantaged families. In this study, we first examined associations between family characteristics and different indices of parent involvement in the GRS intervention. We then examined associations between parent involvement and change in children's school readiness skills over time. Participants were 133 preschool children attending Head Start and their parents who participated in the GRS intervention during the academic year 2014-2015. Parent involvement was operationalized as attendance to GRS events at the school, time spent at home doing GRS activities, and usage of digital program materials, which included a set of videos to support the implementation of parent-child activities at home. Although few family characteristics were significantly associated with parent involvement indices, there was a tendency for some markers of higher socioeconomic status to be linked with greater parent involvement. In addition, greater parent involvement in the GRS intervention was significantly associated with greater gains in children's early literacy, math, and self-regulatory skills. These findings suggest that parent involvement in comprehensive early interventions could be beneficial in terms of improving school readiness for preschoolers from disadvantaged families.

Parent Involvement in the Getting Ready for School Intervention Is Associated With Changes in School Readiness Skills

PubMed Central

Marti, Maria; Merz, Emily C.; Repka, Kelsey R.; Landers, Cassie; Noble, Kimberly G.; Duch, Helena

2018-01-01

The role of parent involvement in school readiness interventions is not well-understood. The Getting Ready for School (GRS) intervention is a novel program that has both home and school components and aims to improve early literacy, math, and self-regulatory skills in preschool children from socioeconomically disadvantaged families. In this study, we first examined associations between family characteristics and different indices of parent involvement in the GRS intervention. We then examined associations between parent involvement and change in children's school readiness skills over time. Participants were 133 preschool children attending Head Start and their parents who participated in the GRS intervention during the academic year 2014–2015. Parent involvement was operationalized as attendance to GRS events at the school, time spent at home doing GRS activities, and usage of digital program materials, which included a set of videos to support the implementation of parent-child activities at home. Although few family characteristics were significantly associated with parent involvement indices, there was a tendency for some markers of higher socioeconomic status to be linked with greater parent involvement. In addition, greater parent involvement in the GRS intervention was significantly associated with greater gains in children's early literacy, math, and self-regulatory skills. These findings suggest that parent involvement in comprehensive early interventions could be beneficial in terms of improving school readiness for preschoolers from disadvantaged families. PMID:29904362

Status of shuttle fuel cell technology program.

NASA Technical Reports Server (NTRS)

Rice, W. E.; Bell, D., III

1972-01-01

The hydrogen-oxygen fuel cell has been proved as an efficient and reliable electrical power supply for NASA manned-space-flight vehicles. It has thus ensured a role in the Space Shuttle Program as the primary electrical power supply for the Orbiter vehicle. The advanced fuel cell technology programs conducted under the management of the NASA Manned Spacecraft Center over the past two years have resulted in a high level of technical readiness in fuel cell power generation to support shuttle mission requirements. These programs have taken advantage of technological developments that have occurred since the designs were completed for the Gemini and Apollo fuel cells.

STI/DOE Solar decathlon- Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washington, Gregory

2016-04-14

Team Orange successfully designed and constructed a house driven by new design concepts and technical innovations that harmonize with Southern California’s lifestyle and respect its cultural heritage. The basic elements of our 2015 proposal can be summarized as follows: Increased emphasis on the passive solar design concept, with a visually stimulating design that enhances the Southern California lifestyle; Use of design and construction techniques to create a market-ready home for an efficient and affordable lifestyle; Integrated use of new technology to create a behavior-adaptive smart home; A zero net energy house complying with the Living Building philosophy; and compliance withmore » all DOE Solar Decathlon requirements.« less

A Module Experimental Process System Development Unit (MEPSDU). [development of low cost solar arrays

NASA Technical Reports Server (NTRS)

1981-01-01

The technical readiness of a cost effective process sequence that has the potential for the production of flat plate photovoltaic modules which met the price goal in 1986 of $.70 or less per Watt peak was demonstrated. The proposed process sequence was reviewed and laboratory verification experiments were conducted. The preliminary process includes the following features: semicrystalline silicon (10 cm by 10 cm) as the silicon input material; spray on dopant diffusion source; Al paste BSF formation; spray on AR coating; electroless Ni plate solder dip metallization; laser scribe edges; K & S tabbing and stringing machine; and laminated EVA modules.

[Preoperative psychoprophylaxis in childhood. Results of a hospital program].

PubMed

Admetlla i Admetlla, I A; Jover i Fulgueira, S

1988-05-01

Results of a surgical psychoprophylaxis program, theoretically and technically framed within psychoanalytic theory is presented. It also comprises a description of the method used, as well as criteria by which authors have determined whether or not a child is ready for surgery. Results obtained with 134 children and a description of those who showed post-surgical disturbances are presented. Analysis is carried out of the percentage of disorders according to age group, showing that highest risk is among children up to five years of age, coinciding with the finding put forth by other authors. Finally some conclusions in relation to prevention of psychologic iatrogenic disorders in pediatric surgery are drawn.

Advanced sensors and instrumentation

NASA Technical Reports Server (NTRS)

Calloway, Raymond S.; Zimmerman, Joe E.; Douglas, Kevin R.; Morrison, Rusty

1990-01-01

NASA is currently investigating the readiness of Advanced Sensors and Instrumentation to meet the requirements of new initiatives in space. The following technical objectives and technologies are briefly discussed: smart and nonintrusive sensors; onboard signal and data processing; high capacity and rate adaptive data acquisition systems; onboard computing; high capacity and rate onboard storage; efficient onboard data distribution; high capacity telemetry; ground and flight test support instrumentation; power distribution; and workstations, video/lighting. The requirements for high fidelity data (accuracy, frequency, quantity, spatial resolution) in hostile environments will continue to push the technology developers and users to extend the performance of their products and to develop new generations.

Nuclear Thermal Propulsion Technology - Summary of FY 1991 Interagency Panel Planning

NASA Technical Reports Server (NTRS)

Clark, John S.; Mcdaniel, Patrick; Howe, Steven; Stanley, Marland

1991-01-01

An Interagency (NASA/DOE/DOD) technical panel has been working in 1991 to evaluate nuclear thermal propulsion (NTP) concepts on a consistent basis, and to continue technology development project planning for a joint project in nuclear propulsion for Space Exploration Initiative (SEI). This paper summarizes the efforts of the panel to date and summarizes the technology plans defined for NTP. Concepts were categorized based on probable technology readiness data, and innovative 'proof-of-concept' tests and analyses were defined. While further studies will be required to provide a consistent comparison of all of the NTP concepts, the current status of the studies is presented.

New tools and approaches to newborn screening: ready to open Pandora's box?

PubMed

Ficicioglu, Can

2017-05-01

The landscape of newborn screening (NBS) is changing as new tools are developed. We must acknowledge that NBS is a very important and extraordinarily positive initiative especially for rare and serious inherited disorders; however, lessons learned from current NBS should guide the future of NBS as we enter the era of "omics" that will expand NBS for many other genetic disorders. In this article, I will first discuss new tools such as genomics and metabolomics for NBS. I will then turn to assessing how best to take advantage of new technical developments while considering the best interests of patients and the success of newborn screening.

Software to Manage the Unmanageable

NASA Technical Reports Server (NTRS)

2005-01-01

In 1995, NASA s Jet Propulsion Laboratory (JPL) contracted Redmond, Washington-based Lucidoc Corporation, to design a technology infrastructure to automate the intersection between policy management and operations management with advanced software that automates document workflow, document status, and uniformity of document layout. JPL had very specific parameters for the software. It expected to store and catalog over 8,000 technical and procedural documents integrated with hundreds of processes. The project ended in 2000, but NASA still uses the resulting highly secure document management system, and Lucidoc has managed to help other organizations, large and small, with integrating document flow and operations management to ensure a compliance-ready culture.

A strategy for Earth science from space in the 1980s. Part 1: Solid earth and oceans

NASA Technical Reports Server (NTRS)

1982-01-01

The report develops a ten-year science strategy for investigating the solid earth and dynamics of world oceans from Earth orbit. The strategy begins from the premise that earth studies have proceeded to the point where further advances in understanding Earth processes must be based on a global perspective and that the U.S. is technically ready to begin a global study approach from Earth orbit. The major areas of study and their fundamental problems are identified. The strategy defines the primary science objectives to be addressed and the essential measurements and precision to achieve them.

[Chronic pain patients' readiness to change after multimodal treatment. Short- and long-term effects].

PubMed

Küchler, A; Sabatowski, R; Kaiser, U

2012-12-01

Patients' readiness to behavioural changes according to the transtheoretical model (TTM) and criteria of treatment outcome are positively associated and have in part already been confirmed. For a stable effect of therapeutic treatment, patients' readiness to change seems indispensable for an independent and active pain management. Thus, in addition to an enhanced quality of life, increasing patients' motivation is a declared objective of the treatment at Dresden's Comprehensive Pain Center. In this study, it was examined how the readiness to change develops in the course of and during the 2 years following the multimodal treatment program. Furthermore, associations between outcome criteria of the treatment and patients' readiness to change were explored. The database constitutes 169 patients who took part in a 4-week interdisciplinary, partially residential pain treatment. Beside the Freiburg Pain Stages questionnaire ("Frieburger Fragebogen - Stadien der Bewältigung chronischer Schmerzen", FF-STABS), a comprehensive pain diagnostic inventory including the Pain Disability Index (PDI), the SF-36 questionnaire, and the Hospital Anxiety and Depression Scale (HADS) was completed at six different time points (beginning of treatment, end of treatment, booster session after 10 weeks, after 6, 12, and 24 months). The statistical analyses were performed with SPSS 16.0 including nonparametric analyses and variance analyses. Significant differences in the level of readiness to change between the beginning of treatment and all follow-up measures were observed. The average patients' readiness to change was still higher after 2 years than at the first measurement. However, a differentiated consideration revealed a small portion of patients who showed no change or even a reduction of motivation. After an additional week (booster session), the stages of readiness to change remained stable, irrespective of the direction of the previous change. Regarding therapeutic outcome, significant short- and long-term improvements were evident. For single outcome parameters, positive associations with the stages of readiness to change were found. The results indicate that the outpatient pain management program favorably affects patients' motivation and general quality of life. This effect also seems to be stable over a long period of time. As not all patients show an improvement in stage of readiness to change, the question arises whether the reason of the differences might lie within the patients' and whether specific interventions for motivation might be useful to enhance motivation before starting treatment.

Readiness Review of BWXT for Fabrication of AGR 5/6/7 Compacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, Douglas William; Sharp, Michelle Tracy

In support of preparations for fabricating compacts for the Advanced Gas Reactor (AGR) fuel qualification irradiation experiments (AGR-5/6/7), Idaho National Laboratory (INL) conducted a readiness review of the BWX Technology (BWXT) procedures, processes, and equipment associated with compact fabrication activities at the BWXT Nuclear Operations Group (BWXT-NOG) facility outside Lynchburg, VirginiaVA. The readiness review used quality assurance requirements taken from the American Society of Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008/1a-2009) as a basis to assess readiness to start compact fabrication.

Linking Ready Kids to Ready Schools: A View from Pennsylvania

ERIC Educational Resources Information Center

W. K. Kellogg Foundation, 2008

2008-01-01

Pennsylvania is one of a handful of states that are leading the way in ensuring children receive a continuum of care starting at birth and extending throughout childhood so that they can move seamlessly from home to child care to preschool to school, and then from grade to grade. That means children have to be ready for school. It also means that…

Children's Readiness Gains in Publically Funded, Community-Based Pre-Kindergarten Programs for 4 Year Olds and Preschool for 3 Year Olds

ERIC Educational Resources Information Center

Goldstein, Peggy; Warde, Beverly; Peluso, Paul

2013-01-01

Background: Many states provide public funding to facilitate school readiness for community-based pre-K and preschool programs for 4 year old children and "at risk" 3 year old children. Little research exists on the school readiness gains of children participating in these "garden variety" community-based programs. Objective:…

76 FR 31943 - Meeting of the Department of Defense Military Family Readiness Council (MFRC); Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

... DEPARTMENT OF DEFENSE Meeting of the Department of Defense Military Family Readiness Council (MFRC... Military Family Readiness Council (MFRC) gave notice of a meeting to be held on June 13, 2011, from 2 p.m. to 4 p.m. at the Pentagon Conference Center B6. Pursuant to Section 10(a), Public Law 92-463, as...

Montessori Public School Pre-K Programs and the School Readiness of Low-Income Black and Latino Children

ERIC Educational Resources Information Center

Ansari, Arya; Winsler, Adam

2014-01-01

Within the United States, there are a variety of early education models and curricula aimed at promoting young children's pre-academic, social, and behavioral skills. This study, using data from the Miami School Readiness Project (Winsler et al., 2008, 2012), examined the school readiness gains of low-income Latino (n = 7,045) and Black (n =…

Advancing HIV/AIDS prevention among American Indians through capacity building and the community readiness model.

PubMed

Thurman, Pamela Jumper; Vernon, Irene S; Plested, Barbara

2007-01-01

Although HIV/AIDS prevention has presented challenges over the past 25 years, prevention does work! To be most effective, however, prevention must be specific to the culture and the nature of the community. Building the capacity of a community for prevention efforts is not an easy process. If capacity is to be sustained, it must be practical and utilize the resources that already exist in the community. Attitudes vary across communities; resources vary, political climates are constantly varied and changing. Communities are fluid-always changing, adapting, growing. They are "ready" for different things at different times. Readiness is a key issue! This article presents a model that has experienced a high level of success in building community capacity for effective prevention/intervention for HIV/AIDS and offers case studies for review. The Community Readiness Model provides both quantitative and qualitative information in a user-friendly structure that guides a community through the process of understanding the importance of the measure of readiness. The model identifies readiness- appropriate strategies, provides readiness scores for evaluation, and most important, involves community stakeholders in the process. The article will demonstrate the importance of developing strategies consistent with readiness levels for more cost-effective and successful prevention efforts.

National Alliance for Radiation Readiness: Leveraging Partnerships to Increase Preparedness.

PubMed

Blumenstock, James S; Allen, Meredith

2016-02-01

The National Alliance for Radiation Readiness (NARR) is an alliance of 16 national member organizations that have banded together to serve as the collective "voice of health" in radiological preparedness through: • participation in national dialogues on radiological emergency issues; • provision of thoughtful feedback on documents, policies, and guidelines; and • convening of partners to raise awareness of and resolve radiological emergency issues. NARR benefits from the intersection and interaction of public health, radiation control, healthcare, and emergency management professionals--all with an interest in bolstering the nation's preparedness for a radiological or nuclear incident. NARR is able to provide a unique perspective on radiological and nuclear preparedness by creating multi-disciplinary workgroups to develop guidance, recommendations, and provide subject matter feedback. NARR aims to build response and recovery capacity and capabilities by supporting the sharing of resources and tools, including technical methods and information through the development of an online clearinghouse. NARR also aims to identify and disseminate best practices, as well as define and educate on the roles and responsibilities of local, state, and federal government and the numerous agencies involved with the response to a radiological emergency.

Lithium-Ion Batteries for Aerospace Applications

NASA Technical Reports Server (NTRS)

Surampudi, S.; Halpert, G.; Marsh, R. A.; James, R.

1999-01-01

This presentation reviews: (1) the goals and objectives, (2) the NASA and Airforce requirements, (3) the potential near term missions, (4) management approach, (5) the technical approach and (6) the program road map. The objectives of the program include: (1) develop high specific energy and long life lithium ion cells and smart batteries for aerospace and defense applications, (2) establish domestic production sources, and to demonstrate technological readiness for various missions. The management approach is to encourage the teaming of universities, R&D organizations, and battery manufacturing companies, to build on existing commercial and government technology, and to develop two sources for manufacturing cells and batteries. The technological approach includes: (1) develop advanced electrode materials and electrolytes to achieve improved low temperature performance and long cycle life, (2) optimize cell design to improve specific energy, cycle life and safety, (3) establish manufacturing processes to ensure predictable performance, (4) establish manufacturing processes to ensure predictable performance, (5) develop aerospace lithium ion cells in various AH sizes and voltages, (6) develop electronics for smart battery management, (7) develop a performance database required for various applications, and (8) demonstrate technology readiness for the various missions. Charts which review the requirements for the Li-ion battery development program are presented.

Rapid Maturation of Edge Sensor Technology and Potential Application in Large Space Telescopes with Segmented Primary Mirrors

NASA Technical Reports Server (NTRS)

Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

2002-01-01

This paper explores the history and results of the last two year's efforts to transition inductive edge sensor technology from Technology Readiness Level 2 to Technology Readiness Level 6. Both technical and programmatic challenges were overcome in the design, fabrication, test, and installation of over a thousand sensors making up the Segment Alignment Maintenance System (SAMs) for the 91 segment, 9.2-meter. Hobby Eberly Telescope (HET). The integration of these sensors with the control system will be discussed along with serendipitous leverage they provided for both initialization alignment and operational maintenance. The experience gained important insights into the fundamental motion mechanics of large segmented mirrors, the relative importance of the variance sources of misalignment errors, the efficient conduct of a program to mature the technology to the higher levels. Unanticipated factors required the team to develop new implementation strategies for the edge sensor information which enabled major segmented mirror controller design simplifications. The resulting increase in the science efficiency of HET will be shown. Finally, the on-going effort to complete the maturation of inductive edge sensor by delivering space qualified versions for future IR (infrared radiation) space telescopes.

Automation of Tooling Backup and Cutter Selection for Engineering Production

NASA Astrophysics Data System (ADS)

Terekhov, M. V.; Averchenkov, V. I.; Reutov, A. A.; Handozhko, A. V.

2017-01-01

This paper reports the analysis of a tool support procedure for mechanical engineering and basic trends in the automation of this field are revealed. The system of technical-organizational measures directed at the formation, management and development of the tool stock and a high degree of technological readiness of manufacturing are described. The problems of an automated optimum cutter selection are considered. A mathematical support for a choice of cutters with through-away tips is described. A simulator for the description of combined cutters is presented. Basic criteria defining cutter choice are established. The problem of a multi-criterion fuzzy estimation of alternatives at different significance of choice criteria is solved. The criterion significance ranking at the parameter choice of cutter plates and tool supports is carried out. A set of estimations of cutter plate forms and other cutter parameters taking into account a relative significance of criteria is defined. The application of a decisive rule in the choice of an alternative required is described, which consists in the definition of the intersection of sets of alternative estimations.

School Readiness of Moderately Preterm Children at Preschool Age

ERIC Educational Resources Information Center

Perricone, Giovanna; Morales, M. Regina; Anzalone, Germana

2013-01-01

The study investigates the preschool readiness of moderately preterm children and, in particular, the likely presence of learning disabilities at preschool age. Its theoretical model detects linguistic comprehension and expression; memory-related metacognition and cognition skills; orientation and motor coordination skills; premathematics and…

Ecological Factors Predict Transition Readiness/Self-Management in Youth With Chronic Conditions.

PubMed

Javalkar, Karina; Johnson, Meredith; Kshirsagar, Abhijit V; Ocegueda, Sofia; Detwiler, Randal K; Ferris, Maria

2016-01-01

Health care transition readiness or self-management among adolescents and young adults (AYA) with chronic conditions may be influenced by factors related to their surrounding environment. Study participants were AYA diagnosed with a chronic condition and evaluated at pediatric- and adult-focused subspecialty clinics at the University of North Carolina Hospital Systems. All participants were administered a provider-administered self-management/transition-readiness tool, the UNC TRxANSITION Scale. Geographic area and associated characteristics (ecological factors) were identified for each participant's ZIP code using the published U.S. Census data. The Level 1 model of the hierarchical linear regression used individual-level predictors of transition readiness/self-management. The Level 2 model incorporated the ecological factors. We enrolled 511 AYA with different chronic conditions aged 12-31 years with the following characteristics: mean age of 20± 4 years, 45% white, 42% black, and 54% female. Participants represented 214 ZIP codes in or around North Carolina, USA. The Level 1 model showed that age, gender, and race were significant predictors of transition readiness/self-management. On adding the ecological factors in the Level 2 model, race was no longer significant. Participants from a geographic area with a greater percentage of females (β = .114, p = .005) and a higher median income (β = .126, p = .002) had greater overall transition readiness. Ecological factors also predicted subdomains of transition readiness/self-management. In this cohort of adolescents and young adults with different chronic conditions, ecological disparities such as sex composition, median income, and language predict self-management/transition readiness. It is important to take ecological risk factors into consideration when preparing patients for health self-management or transition. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Conformal image-guided microbeam radiation therapy at the ESRF biomedical beamline ID17

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donzelli, Mattia, E-mail: donzelli@esrf.fr; Bräuer-Krisch, Elke; Nemoz, Christian

Purpose: Upcoming veterinary trials in microbeam radiation therapy (MRT) demand for more advanced irradiation techniques than in preclinical research with small animals. The treatment of deep-seated tumors in cats and dogs with MRT requires sophisticated irradiation geometries from multiple ports, which impose further efforts to spare the normal tissue surrounding the target. Methods: This work presents the development and benchmarking of a precise patient alignment protocol for MRT at the biomedical beamline ID17 of the European Synchrotron Radiation Facility (ESRF). The positioning of the patient prior to irradiation is verified by taking x-ray projection images from different angles. Results: Usingmore » four external fiducial markers of 1.7  mm diameter and computed tomography-based treatment planning, a target alignment error of less than 2  mm can be achieved with an angular deviation of less than 2{sup ∘}. Minor improvements on the protocol and the use of smaller markers indicate that even a precision better than 1  mm is technically feasible. Detailed investigations concerning the imaging dose lead to the conclusion that doses for skull radiographs lie in the same range as dose reference levels for human head radiographs. A currently used online dose monitor for MRT has been proven to give reliable results for the imaging beam. Conclusions: The ESRF biomedical beamline ID17 is technically ready to apply conformal image-guided MRT from multiple ports to large animals during future veterinary trials.« less

Health Professionals' readiness to implement electronic medical record system at three hospitals in Ethiopia: a cross sectional study.

PubMed

Biruk, Senafekesh; Yilma, Tesfahun; Andualem, Mulusew; Tilahun, Binyam

2014-12-12

Electronic medical record systems are being implemented in many countries to support healthcare services. However, its adoption rate remains low, especially in developing countries due to technological, financial, and organizational factors. There is lack of solid evidence and empirical research regarding the pre implementation readiness of healthcare providers. The aim of this study is to assess health professionals' readiness and to identify factors that affect the acceptance and use of electronic medical recording system in the pre implementation phase at hospitals of North Gondar Zone, Ethiopia. An institution based cross-sectional quantitative study was conducted on 606 study participants from January to July 2013 at 3 hospitals in northwest Ethiopia. A pretested self-administered questionnaire was used to collect the required data. The data were entered using the Epi-Info version 3.5.1 software and analyzed using SPSS version 16 software. Descriptive statistics, bi-variate, and multi-variate logistic regression analyses were used to describe the study objectives and assess the determinants of health professionals' readiness for the system. Odds ratio at 95% CI was used to describe the association between the study and the outcome variables. Out of 606 study participants only 328 (54.1%) were found ready to use the electronic medical recording system according to our criteria assessment. The majority of the study participants, 432 (71.3%) and 331(54.6%) had good knowledge and attitude for EMR system, respectively. Gender (AOR = 1.87, 95% CI: [1.26, 2.78]), attitude (AOR = 1.56, 95% CI: [1.03, 2.49]), knowledge (AOR = 2.12, 95% CI: [1.32, 3.56]), and computer literacy (AOR =1.64, 95% CI: [0.99, 2.68]) were significantly associated with the readiness for EMR system. In this study, the overall health professionals' readiness for electronic medical record system and utilization was 54.1% and 46.5%, respectively. Gender, knowledge, attitude, and computer related skills were the determinants of the presence of a relatively low readiness and utilization of the system. Increasing awareness, knowledge, and skills of healthcare professionals on EMR system before system implementation is necessary to increase its adoption.

The Readiness Nursery in a Medical School.

ERIC Educational Resources Information Center

Silver, Archie A.

Differential diagnosis of delayed language development in the preschool child at the Readiness Nursery of the New York University Medical School can be shown by three case histories. Diagnosis requires identification of factors involved in the origin and development of the child's language deficit both at the time of diagnosis and at the critical…

Predicting implementation from organizational readiness for change: a study protocol

PubMed Central

2011-01-01

Background There is widespread interest in measuring organizational readiness to implement evidence-based practices in clinical care. However, there are a number of challenges to validating organizational measures, including inferential bias arising from the halo effect and method bias - two threats to validity that, while well-documented by organizational scholars, are often ignored in health services research. We describe a protocol to comprehensively assess the psychometric properties of a previously developed survey, the Organizational Readiness to Change Assessment. Objectives Our objective is to conduct a comprehensive assessment of the psychometric properties of the Organizational Readiness to Change Assessment incorporating methods specifically to address threats from halo effect and method bias. Methods and Design We will conduct three sets of analyses using longitudinal, secondary data from four partner projects, each testing interventions to improve the implementation of an evidence-based clinical practice. Partner projects field the Organizational Readiness to Change Assessment at baseline (n = 208 respondents; 53 facilities), and prospectively assesses the degree to which the evidence-based practice is implemented. We will conduct predictive and concurrent validities using hierarchical linear modeling and multivariate regression, respectively. For predictive validity, the outcome is the change from baseline to follow-up in the use of the evidence-based practice. We will use intra-class correlations derived from hierarchical linear models to assess inter-rater reliability. Two partner projects will also field measures of job satisfaction for convergent and discriminant validity analyses, and will field Organizational Readiness to Change Assessment measures at follow-up for concurrent validity (n = 158 respondents; 33 facilities). Convergent and discriminant validities will test associations between organizational readiness and different aspects of job satisfaction: satisfaction with leadership, which should be highly correlated with readiness, versus satisfaction with salary, which should be less correlated with readiness. Content validity will be assessed using an expert panel and modified Delphi technique. Discussion We propose a comprehensive protocol for validating a survey instrument for assessing organizational readiness to change that specifically addresses key threats of bias related to halo effect, method bias and questions of construct validity that often go unexplored in research using measures of organizational constructs. PMID:21777479

Ready, Set, Change! Development and usability testing of an online readiness for change decision support tool for healthcare organizations.

PubMed

Timmings, Caitlyn; Khan, Sobia; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Straus, Sharon E

2016-02-24

To address challenges related to selecting a valid, reliable, and appropriate readiness assessment measure in practice, we developed an online decision support tool to aid frontline implementers in healthcare settings in this process. The focus of this paper is to describe a multi-step, end-user driven approach to developing this tool for use during the planning stages of implementation. A multi-phase, end-user driven approach was used to develop and test the usability of a readiness decision support tool. First, readiness assessment measures that are valid, reliable, and appropriate for healthcare settings were identified from a systematic review. Second, a mapping exercise was performed to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a modified Delphi process was used to collect stakeholder ratings of the included measures on domains of feasibility, relevance, and likelihood to recommend. Fourth, two versions of a decision support tool prototype were developed and evaluated for usability. Nine valid and reliable readiness assessment measures were included in the decision support tool. The mapping exercise revealed that of the nine measures, most measures (78 %) focused on assessing readiness for change at the organizational versus the individual level, and that four measures (44 %) represented all constructs of organizational readiness. During the modified Delphi process, stakeholders rated most measures as feasible and relevant for use in practice, and reported that they would be likely to recommend use of most measures. Using data from the mapping exercise and stakeholder panel, an algorithm was developed to link users to a measure based on characteristics of their organizational setting and their readiness for change assessment priorities. Usability testing yielded recommendations that were used to refine the Ready, Set, Change! decision support tool . Ready, Set, Change! decision support tool is an implementation support that is designed to facilitate the routine incorporation of a readiness assessment as an early step in implementation. Use of this tool in practice may offer time and resource-saving implications for implementation.

Health Facility Graduation from Donor-Supported Intensive Technical Assistance and Associated Factors in Zambia.

PubMed

Koni, Phillip; Chishinga, Nathaniel; Nyirenda, Lameck; Kasonde, Prisca; Nsakanya, Richard; Welsh, Michael

2015-01-01

The FHI360-led Zambia Prevention Care and Treatment partnership II (ZPCT II) with funding from United States Agency for International Development, supports the Zambian Ministry of Health in scaling up HIV/AIDS services. To improve the quality of HIV/AIDS services, ZPCT II provides technical assistance until desired standards are met and districts are weaned-off intensive technical support, a process referred to as district graduation. This study describes the graduation process and determines performance domains associated with district graduation. Data were collected from 275 health facilities in 39 districts in 5 provinces of Zambia between 2008 and 2012. Performance in technical capacity, commodity management, data management and human resources domains were assessed in the following services areas: HIV counselling and testing and prevention of mother to child transmission, antiretroviral therapy/clinical care, pharmacy and laboratory. The overall mean percentage score was calculated by obtaining the mean of mean percentage scores for the four domains. Logistic regression models were used to obtain odds ratios (OR) and 95% confidence intervals (CI) for the domain mean percentage scores in graduated versus non-graduated districts; according to rural-urban, and province strata. 24 districts out of 39 graduated from intensive donor supported technical assistance while 15 districts did not graduate. The overall mean percentage score for all four domains was statistically significantly higher in graduated than non-graduated districts (93.2% versus 91.2%, OR = 1.34, 95%CI:1.20-1.49); including rural settings (92.4% versus 89.4%, OR = 1.43,95%CI:1.24-1.65). The mean percentage score in human resource domain was statistically significantly higher in graduated than non-graduated districts (93.6% versus 71.6%, OR = 5.81, 95%CI: 4.29-7.86) and in both rural and urban settings. QA/QI tools can be used to assess performance at health facilities and determine readiness for district graduation. Human resources management domain was found to be an important factor associated with district graduation.

Health Facility Graduation from Donor-Supported Intensive Technical Assistance and Associated Factors in Zambia

PubMed Central

Koni, Phillip; Chishinga, Nathaniel; Nyirenda, Lameck; Kasonde, Prisca; Nsakanya, Richard; Welsh, Michael

2015-01-01

Introduction The FHI360-led Zambia Prevention Care and Treatment partnership II (ZPCT II) with funding from United States Agency for International Development, supports the Zambian Ministry of Health in scaling up HIV/AIDS services. To improve the quality of HIV/AIDS services, ZPCT II provides technical assistance until desired standards are met and districts are weaned-off intensive technical support, a process referred to as district graduation. This study describes the graduation process and determines performance domains associated with district graduation. Methods Data were collected from 275 health facilities in 39 districts in 5 provinces of Zambia between 2008 and 2012. Performance in technical capacity, commodity management, data management and human resources domains were assessed in the following services areas: HIV counselling and testing and prevention of mother to child transmission, antiretroviral therapy/clinical care, pharmacy and laboratory. The overall mean percentage score was calculated by obtaining the mean of mean percentage scores for the four domains. Logistic regression models were used to obtain odds ratios (OR) and 95% confidence intervals (CI) for the domain mean percentage scores in graduated versus non-graduated districts; according to rural-urban, and province strata. Results 24 districts out of 39 graduated from intensive donor supported technical assistance while 15 districts did not graduate. The overall mean percentage score for all four domains was statistically significantly higher in graduated than non-graduated districts (93.2% versus 91.2%, OR = 1.34, 95%CI:1.20–1.49); including rural settings (92.4% versus 89.4%, OR = 1.43,95%CI:1.24–1.65). The mean percentage score in human resource domain was statistically significantly higher in graduated than non-graduated districts (93.6% versus 71.6%, OR = 5.81, 95%CI: 4.29–7.86) and in both rural and urban settings. Conclusions QA/QI tools can be used to assess performance at health facilities and determine readiness for district graduation. Human resources management domain was found to be an important factor associated with district graduation. PMID:26098555

LBNL report of the vetting review of the GRETINA project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, K.E.; Bercovitz, J.H.; Bieser, F.S.

GRETINA is a gamma-ray detector array capable of reconstructing the energy and spatial positions of gamma-ray interactions within the germanium crystals. It will be used to study the structure and stability of nuclei under various conditions. The new capabilities provided by gamma-ray tracking will give large gains in sensitivity for a large number of experiments, particularly those aimed at nuclei far from beta stability. A proposal for GRETINA was submitted to DOE in June 2003. It presented the scientific case, the readiness of technical development, the design, the suggested management organizations, and a proposed cost and schedule. The GRETINA proposalmore » received its CD0 approval in August 2003. The CD-1 review will be held on December 3 and 4, 2003, and will be handled by the DOE-N. This report presents the charge to the GRETINA vetting review committee, and the findings, comments and recommendations of this committee. The purpose of this project vetting review was to assure that the GRETINA project is on track to provide DOE and the nuclear physics community with the agreed upon deliverables within the agreed upon budget and schedule. The vetting review committee was asked to cover both technical and management aspects of the GRETINA Project. Reviewers offer expert knowledge in relevant areas and provide recommendations and findings to the project's management team. Upon successful completion, the Laboratory's Integrated Project Management Office (IPMO) will recommend signoff of the project to the Laboratory Directorate. The GRETINA vetting review committee was asked to consider all relevant aspects of the project's management, project execution plan (PEP), technical approach and status, cost estimate, resources, schedule and risk and, in doing so, to advise as to whether the GRETINA Project was likely to successfully provide the agreed upon deliverables within the agreed upon budget and schedule. The review committee was asked to identify any project areas that may be incomplete for the current phase in the project and any area of significant risk for the project reaching its objectives. The committee was also asked to review and evaluate the technical status of the project and advise on any concerns or significant technical risks.« less

School readiness of children with language impairment: predicting literacy skills from pre-literacy and social-behavioural dimensions.

PubMed

Pentimonti, Jill M; Murphy, Kimberly A; Justice, Laura M; Logan, Jessica A R; Kaderavek, Joan N

2016-03-01

School readiness generally captures the notion that children do best when they arrive at formal schooling with a certain threshold of skill that will help them thrive in the classroom's academic and social milieu. To examine the dimensionality of the construct of school readiness among children with language impairment (LI), as well as the extent to which these dimensions relate to children's end-of-kindergarten literacy skills. Participants were 136 preschool-aged children with LI. Children were assessed on measures of pre-literacy, social, and behavioural skills in preschool and reading and spelling in kindergarten. Confirmatory factor analyses indicated that school readiness for this sample of children with LI is best characterized as two dimensions: pre-literacy and socio-emotional. Of the two dimensions, pre-literacy readiness was predictive of children's future performance in reading and spelling. The results further our theoretical understanding of the dimensions of school readiness, as well as our knowledge of how these skills are related among children with LI. Identifying domain-specific readiness skills that are predictive of kindergarten success can help to identify means of early assessment and targets for speech-language intervention. © 2015 Royal College of Speech and Language Therapists.

Improving ready biodegradability testing of fatty amine derivatives.

PubMed

van Ginkel, C G; Gancet, C; Hirschen, M; Galobardes, M; Lemaire, Ph; Rosenblom, J

2008-09-01

This study assesses the biodegradation potential of a number of fatty amine derivatives in tests following the OECD guidelines for ready biodegradability. A number of methods are used to reduce toxicity and improve the bioavailability of the fatty amine derivatives in these tests. Alkyl-1,3-diaminopropanes and octadecyltrimethylammonium chloride are toxic to microorganisms at concentrations used in OECD ready biodegradability tests. The concentration of these fatty amine derivatives in the aqueous phase can be reduced by reacting humic, or lignosulphonic acids with the derivatives or through the addition of silica gel to the test bottles. Using these non-biodegradable substances, ready biodegradability test results were obtained with tallow-1,3-diaminopropane and octadecyltrimethylammonium chloride. Demonstration of the ready biodegradability of the water-insoluble dioctadecylamine under the prescribed standard conditions is almost impossible due to the limited bioavailability of this compound. However, ready biodegradability results were achieved by using very low initial test substance concentrations and by introducing an organic phase. The contents of the bottles used to assess the biodegradability of dioctadecylamine were always mixed. False negative biodegradability results obtained with the fatty amine derivatives studied are the result of toxic effects and/or limited bioavailability. The aids investigated therefore improve ready biodegradability testing.

Parent Engagement and School Readiness: Effects of the Getting Ready Intervention on Preschool Children’s Social–Emotional Competencies

PubMed Central

Sheridan, Susan M.; Knoche, Lisa L.; Edwards, Carolyn P.; Bovaird, James A.; Kupzyk, Kevin A.

2014-01-01

Research Findings Parental engagement with children has been linked to a number of adaptive characteristics in preschool children, and relationships between families and professionals are an important contributor to school readiness. Furthermore, social–emotional competence is a key component of young children’s school readiness. This study reports the results of a randomized trial of a parent engagement intervention (Getting Ready) designed to facilitate school readiness among disadvantaged preschool children, with a particular focus on social–emotional outcomes. Two hundred and twenty children were involved over the 4-year study period. Statistically significant differences were observed between treatment and control participants in the rate of change over a 2-year period on teacher reports for certain interpersonal competencies (i.e., attachment, initiative, and anxiety/ withdrawal). In contrast, no statistically significant differences between groups over a 2-year period were noted for behavioral concerns (anger/aggression, self-control, or behavioral problems) as a function of the Getting Ready intervention. Practice or Policy The intervention appears to be particularly effective at building social–emotional competencies beyond the effects experienced as a function of participation in Head Start programming alone. Limitations and implications for future research are reviewed. PMID:24683299

Improving performance of Zambia Defence Force antiretroviral therapy providers: evaluation of a standards-based approach

PubMed Central

Kim, Young Mi; Banda, Joseph; Kanjipite, Webby; Sarkar, Supriya; Bazant, Eva; Hiner, Cyndi; Tholandi, Maya; Reinhardt, Stephanie; Njobvu, Panganani Dalisani; Kols, Adrienne; Benavides, Bruno

2013-01-01

ABSTRACT Background: The Zambia Defence Force (ZDF) has applied the Standards-Based Management and Recognition (SBM-R®) approach, which uses detailed performance standards, at some health facilities to improve HIV-related services offered to military personnel and surrounding civilian communities. This study examines the effectiveness of the SBM-R approach in improving facility readiness and provider performance at ZDF facilities. Methods: We collected data on facility readiness and provider performance before and after the 2010–2012 intervention at 4 intervention sites selected for their relatively poor performance and 4 comparison sites. Assessors observed whether each facility met 16 readiness standards and whether providers met 9 performance standards during consultations with 354 returning antiretroviral therapy (ART) clients. We then calculated the percentages of criteria achieved for each readiness and performance standard and conducted bivariate and multivariate analyses of provider performance data. Results: Facilities' ART readiness scores exceeded 80% before the intervention at both intervention and comparison sites. At endline, scores improved on 4 facility readiness standards in the intervention group but on only 1 standard in the comparison group. Multivariate analysis found that the overall provider performance score increased significantly in the intervention group (from 58% to 84%; P<.01) but not in the comparison group (from 62% to 70%). The before-and-after improvement in scores was significantly greater among intervention sites than among comparison sites for 2 standards—initial assessment of the client's condition and nutrition counseling. Conclusion: The standards-based approach, which involved intensive and mutually reinforcing intervention activities, showed modest improvements in some aspects of providers' performance during ART consultations. Further research is needed to determine whether improvements in provider performance affect client outcomes such as adherence to ART. PMID:25276534

76 FR 32359 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-06

... Readiness (FFR) Internship Program (March 10, 2008, 73 FR 12713). Reason: Commander, Navy Installations...) employees at an installation level. N12308- 1, The Navy Fleet and Family Readiness (FFR) Internship Program...

Using a health informatics system to assess effect of a federal cigarette tax increase on readiness to quit among low-income smokers, Louisiana, 2009.

PubMed

Tseng, Tung-Sung; Moody-Thomas, Sarah; Horswell, Ronald; Yi, Yong; Celestin, Michael D; Jones, Krysten D

2014-04-04

Health informatics systems are a proven tool for tobacco control interventions. To address the needs of low-income groups, the Tobacco Control Initiative was established in partnership with the Louisiana State University Health Care Services Division to provide cost-effective tobacco use cessation services through the health informatics system in the state public hospital system. In this study we used a Web-based, result-reporting application to monitor and assess the effect of the 2009 federal cigarette tax increase. We assessed readiness to quit tobacco use before and after a cigarette tax increase among low-income tobacco users who were outpatients in a public hospital system. Overall, there was an increase in readiness to quit, from 22% during the first week of February to 33% during the first week of April, when the tax went into effect. Smokers who were female, 31 or older, African American, and assessed at a clinic visit in April were more likely to report readiness to quit than were men, those aged 30 or younger, those who were white, and those who were assessed at a clinic visit in February. A health informatics system that efficiently tracks trends in readiness to quit can be used in combination with other strategies and thus optimize efforts to control tobacco use. Our data suggest that a cigarette tax increase affects smokers' readiness to quit and provides an opportunity to intervene at the most beneficial time.

Predicting school readiness from neurodevelopmental assessments at age 2 years after respiratory distress syndrome in infants born preterm.

PubMed

Patrianakos-Hoobler, Athena I; Msall, Michael E; Huo, Dezheng; Marks, Jeremy D; Plesha-Troyke, Susan; Schreiber, Michael D

2010-04-01

To determine whether neurodevelopmental outcomes at the age of 2 years accurately predict school readiness in children who survived respiratory distress syndrome after preterm birth. Our cohort included 121 preterm infants who received surfactant and ventilation and were enrolled in a randomized controlled study of inhaled nitric oxide for respiratory distress syndrome. Abnormal outcomes at the age of 2 years were defined as neurosensory disability (cerebral palsy, blindness, or bilateral hearing loss) or delay (no neurosensory disability but Bayley Scales of Infant Development mental or performance developmental index scores <70). School readiness (assessed at a mean age of 5y 6mo, SD 1y) was determined using neurodevelopmental assessments of motor, sensory, receptive vocabulary, perceptual, conceptual, and adaptive skills. The mean birthweight of the cohort (57 males, 64 females) was 987g (SD 374), and the mean gestational age was 27.3 weeks (SD 2.6). At the age of 2 years, the neurodevelopmental classification was 'disabled' in 11% and 'delayed' in 23%. At the age of 5 years 6 months, intensive special education was required for 11% and some special education for 21%. Disability and delay at the age of 2 years were 92% and 50% predictive of lack of school readiness respectively, whereas only 15% of children who were normal at the age of 2 years were not school ready at the later assessment. Children with delay at 2 years were more likely to need special education if they were socially disadvantaged. Without preschool developmental supports, preterm survivors living in poverty will require more special education services.

e-Health readiness assessment factors and measuring tools: A systematic review.

PubMed

Yusif, Salifu; Hafeez-Baig, Abdul; Soar, Jeffrey

2017-11-01

The evolving, adoption and high failure nature of health information technology (HIT)/IS/T systems requires effective readiness assessment to avert increasing failures while increasing system benefits. However, literature on HIT readiness assessment is myriad and fragmented. This review bares the contours of the available literature concluding in a set of manageable and usable recommendations for policymakers, researchers, individuals and organizations intending to assess readiness for any HIT implementation. Identify studies, analyze readiness factors and offer recommendations. Published articles 1995-2016 were searched using Medline/PubMed, Cinahl, Web of Science, PsychInfo, ProQuest. Studies were included if they were assessing IS/T/mHealth readiness in the context of HIT. Articles not written in English were excluded. Themes that emerged in the process of the data synthesis were thematically analysed and interpreted. Analyzed themes were found across 63 articles. In accordance with their prevalence of use, they included but not limited to "Technological readiness", 30 (46%); "Core/Need/Motivational readiness", 23 (37%); "Acceptance and use readiness", 19 (29%); "Organizational readiness", 20 (21%); "IT skills/Training/Learning readiness" (18%), "Engagement readiness", 16 (24%) and "Societal readiness" (14%). Despite their prevalence in use, "Technological readiness", "Motivational readiness" and "Engagement readiness" all had myriad and unreliable measuring tools. Core readiness had relatively reliable measuring tools, which repeatedly been used in various readiness assessment studies CONCLUSION: Thus, there is the need for reliable measuring tools for even the most commonly used readiness assessment factors/constructs: Core readiness, Engagement and buy-ins readiness, Technological readiness and IT Skills readiness as this could serve as an immediate step in conducting effective/reliable e-Health readiness assessment, which could lead to reduced HIT implementation failures. Copyright © 2017 Elsevier B.V. All rights reserved.

Characterization of environmental cues for initiation of reproductive cycling and spawning in shovelnose sturgeon Scaphirhynchus platorynchus in the Lower Missouri River, USA

USGS Publications Warehouse

Papoulias, D.M.; DeLonay, A.J.; Annis, M.L.; Wildhaber, M.L.; Tillitt, D.E.

2011-01-01

We presume that the shovelnose sturgeon (Scaphirhynchus platorynchus) has evolved to spawn in the springtime when environmental conditions are at some optimum, but this state has not yet been defined. In this study physiological readiness to spawn in shovelnose sturgeon was examined to define more closely when spawning could occur and thus identify and evaluate prevailing environmental conditions that could cue spawning during that period. Reproductive assessments of Lower Missouri River shovelnose during 4 years (2005-2008) and at two locations (Gavins Point Dam, South Dakota and Boonville, Missouri) were used to identify shovelnose sturgeon spawning periods. Initiation of the spawning period, as defined by the presence of reproductively ready fish, was a highly predictable yearly event and extended over several weeks at each reach. The spawning period occurred earlier in the lower reach than in the upper reach and environmental conditions during the periods varied between locations and among years. Shovelnose sturgeon collected during the presumed spawning periods were at varying degrees of readiness to spawn as indicated by oocyte polarization index and blood reproductive hormones. Evaluation of the influence of environmental factors on readiness to spawn using stepwise multiple regression analysis indicated photoperiod followed by temperature were the best candidate variables overall to explain the trend. However, within geographically distinct populations gravid females are not all reproductively synchronized. Assuming that this apparent asynchrony in readiness is normal and not an artifact of the disturbed Missouri River system, we infer that individual sturgeon can persist in a reproductively ready state until conditions appropriate for spawning occur. Taken together, our results lead us to hypothesize that gravid females early in the reproductive cycle (post-vitellogenesis) respond to day length, a reliable annual cue, become increasingly more ready to spawn in response to temperature, and that another set of cues, short-term and specific for localized environmental conditions or events, serve to signal ovulation and release of gametes.

An EarthCube Roadmap for Cross-Domain Interoperability in the Geosciences: Governance Aspects

NASA Astrophysics Data System (ADS)

Zaslavsky, I.; Couch, A.; Richard, S. M.; Valentine, D. W.; Stocks, K.; Murphy, P.; Lehnert, K. A.

2012-12-01

The goal of cross-domain interoperability is to enable reuse of data and models outside the original context in which these data and models are collected and used and to facilitate analysis and modeling of physical processes that are not confined to disciplinary or jurisdictional boundaries. A new research initiative of the U.S. National Science Foundation, called EarthCube, is developing a roadmap to address challenges of interoperability in the earth sciences and create a blueprint for community-guided cyberinfrastructure accessible to a broad range of geoscience researchers and students. Infrastructure readiness for cross-domain interoperability encompasses the capabilities that need to be in place for such secondary or derivative-use of information to be both scientifically sound and technically feasible. In this initial assessment we consider the following four basic infrastructure components that need to be present to enable cross-domain interoperability in the geosciences: metadata catalogs (at the appropriate community defined granularity) that provide standard discovery services over datasets, data access services, models and other resources of the domain; vocabularies that support unambiguous interpretation of domain resources and metadata; services used to access data repositories and other resources including models, visualizations and workflows; and formal information models that define structure and semantics of the information returned on service requests. General standards for these components have been proposed; they form the backbone of large scale integration activities in the geosciences. By utilizing these standards, EarthCube research designs can take advantage of data discovery across disciplines using the commonality in key data characteristics related to shared models of spatial features, time measurements, and observations. Data can be discovered via federated catalogs and linked nomenclatures from neighboring domains, while standard data services can be used to transparently compile composite data products. Key questions addressed in this presentation are: (1) How to define and assess readiness of existing domain information systems for cross-domain re-use? (2) How to determine EarthCube development priorities given a multitude of use cases that involve cross-domain data flows? and (3) How to involve a wider community of geoscientists in the development and curation of cross-domain resources and incorporate community feedback in the CI design? Answering them involves consideration of governance mechanisms for cross-domain interoperability: while domain information systems and projects developed governance mechanisms, managing cross-domain CI resources and supporting cross-domain information re-use hasn't been the development focus at the scale of the geosciences. We present a cross-domain readiness model as enabling effective communication among scientists, governance bodies, and information providers. We also present an initial readiness assessment and a cross-domain connectivity map for the geosciences, and outline processes for eliciting user requirements, setting priorities, and obtaining community consensus.

Libraries at the Ready

ERIC Educational Resources Information Center

Celano, Donna C.; Neuman, Susan B.

2016-01-01

Because English language learners enter kindergarten at a distinct disadvantage, Celano and Neuman examine the role public libraries can play in rallying around these young children to better prepare them for school. The authors document a new program called Every Child Ready to Read, which recently launched in 4,000 public libraries across the…

27. Photographic copy of original construction drawing, dated May 22, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Photographic copy of original construction drawing, dated May 22, 1951 (from paper copy at Engineering Flight, Ellsworth Air Force Base, SD). Readiness hangar architectural: plan at clerestory & elevation. - Ellsworth Air Force Base, Readiness Hangar, Kenny Road, southeast corner of interstction with G Avenue, Blackhawk, Meade County, SD

76 FR 66891 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... Respondents: 265. Average Hours per Response: StormReady, Tsunami-Ready and StormReady/TsunamiReady... request is for revision of a current information collection. The StormReady, TsunamiReady and and StormReady/TsunamiReady Programs are voluntary programs offered to provide guidance and incentive to...

Saudi EFL Teachers' Readiness and Perceptions of Young Learners Teaching at Elementary Schools

ERIC Educational Resources Information Center

Fahd Al Malihi, Joza

2015-01-01

This study aimed to investigate EFL elementary school teachers' perception of their own readiness to teach young learners at Saudi schools as it has been recently introduced at this level. Further, it inspects their major needs that should be considered when developing teacher-training programs. A questionnaire was distributed targeting elementary…

Idaho National Laboratory Emergency Readiness Assurance Plan - Fiscal Year 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, Carl J.

Department of Energy Order 151.1C, Comprehensive Emergency Management System requires that each Department of Energy field element documents readiness assurance activities, addressing emergency response planning and preparedness. Battelle Energy Alliance, LLC, as prime contractor at the Idaho National Laboratory (INL), has compiled this Emergency Readiness Assurance Plan to provide this assurance to the Department of Energy Idaho Operations Office. Stated emergency capabilities at the INL are sufficient to implement emergency plans. Summary tables augment descriptive paragraphs to provide easy access to data. Additionally, the plan furnishes budgeting, personnel, and planning forecasts for the next 5 years.

Evaluation of a Surgery-Based Adjunct Course for Senior Medical Students Entering Surgical Residencies.

PubMed

Green, Courtney A; Vaughn, Carolyn J; Wyles, Susannah M; O'Sullivan, Patricia S; Kim, Edward H; Chern, Hueylan

2016-01-01

Preparatory courses for senior medical students aim to ease the transition from medical school to residency. We designed a novel adjunct curriculum to enhance students' readiness for surgical internship. This study addresses the feasibility and outcomes of this course. A curriculum was designed based on ACGME surgical milestones. Students participated in 8 (3h) sessions held over 4 weeks as an adjunct to a well-established intern preparatory course. Course activities involved interactive simulation cases to emphasize care of surgical patients, and skills sessions focused on knot tying and suturing, which were reinforced with home video assignments. Students rated confidence on 14 management skills using a 5-point Likert scale (5 = high confidence). Faculty graded students' technical performance using a global scale (0-10) for 5 suturing exercises. Comparisons between precourse and postcourse data collected for all measures were made using t-tests (α = 0.05). A total of 11 students entering 4 different surgical fields participated. Overall confidence in patient management improved from 2.41 to 3.89 (standard deviation = 0.49, 0.35; p < 0.05). Students' scores on all 5 suturing tasks increased (p < 0.05). We developed a surgery-specific component to the existing preparatory course at our institution. Students demonstrated increased confidence in ward management skills and increased technical scores in all exercises. Although only 3 sessions were dedicated to technical skills, improvements may highlight the benefit of home video assignments. This course serves as a specialty-specific model for schools with existing preparatory courses. Our curriculum highlights skills specific for surgical residency, while maximizing resources. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Developing Research-Ready Skills: Preparing Early Academic Students for Participation in Research Experiences

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Morris, A. R.

2015-12-01

Engaging lower-division undergraduates in research experiences is a key but challenging aspect of guiding talented students into the geoscience research pipeline. UNAVCO conducted a summer internship program to prepare first and second year college students for participation in authentic, scientific research. Many students in their first two years of academic studies do not have the science content knowledge or sufficient math skills to conduct independent research. Students from groups historically underrepresented in the geosciences may face additional challenges in that they often have a less robust support structure to help them navigate the university environment and may be less aware of professional opportunities in the geosciences.UNAVCO, manager of NSF's geodetic facility, hosted four students during summer 2015 internship experience aimed to help them develop skills that will prepare them for research internships and skills that will help them advance professionally. Students spent eight weeks working with UNAVCO technical staff learning how to use equipment, prepare instrumentation for field campaigns, among other technical skills. Interns also participated in a suite of professional development activities including communications workshops, skills seminars, career circles, geology-focused field trips, and informal interactions with research interns and graduate student interns at UNAVCO. This presentation will outline the successes and challenges of engaging students early in their academic careers and outline the unique role such experiences can have in students' academic careers.

Readiness to change and therapy outcomes of an innovative psychotherapy program for surgical patients: results from a randomized controlled trial.

PubMed

Krampe, Henning; Salz, Anna-Lena; Kerper, Léonie F; Krannich, Alexander; Schnell, Tatjana; Wernecke, Klaus-Dieter; Spies, Claudia D

2017-12-29

Readiness to change is a pivotal construct for psychotherapy research and a major target of motivational interventions. Our primary objective was to examine whether pre-treatment readiness to change moderated therapy effects of Bridging Intervention in Anesthesiology (BRIA), an innovative psychotherapy approach for surgical patients. This stepped care program aims at motivating and supporting surgical patients with mental disorders to engage in psychosocial mental health care. The major steps of BRIA are two motivational interventions with different intensity. The first step of the program consists of preoperative computer-assisted psychosocial self-assessment including screening for psychological distress and automatically composed computerized brief written advice (BWA). In the second step, patients participate in postoperative psychotherapy sessions combining motivational interviewing with cognitive behavioural therapy (BRIA psychotherapy sessions). We performed regression-based moderator analyses on data from a recent randomized controlled trial published by our research group. The sample comprised 220 surgical patients with diverse comorbid mental disorders according to ICD-10. The most frequent disorders were mood, anxiety, substance use and adjustment disorders. The patients had a mean age of 43.31 years, and 60.90% were women. In a regression model adjusted for pre-treatment psychological distress, we investigated whether readiness to change moderated outcome differences between (1) the BRIA psychotherapy sessions and (2) no psychotherapy / BWA only. Multiple regression analyses showed that readiness to change moderated treatment effects regarding the primary outcomes "Participation in psychosocial mental health care options at month 6" (p = 0.03) and "Having approached psychosocial mental health care options at month 6" (p = 0.048) but not regarding the secondary outcome "Change of general psychological distress between baseline assessment and month 6" (p = 0.329). Probing the moderation effect with the Johnson-Neyman technique revealed that BRIA psychotherapy sessions were superior to BWA in patients with low to moderate readiness, but not in those with high readiness. Readiness to change may act as moderator of the efficacy of psychosocial therapy. Combinations of motivational interviewing and cognitive behavioural therapy may be effective particularly in patients with a variety of mental disorders and low readiness to change. clinicaltrials.gov Identifier: NCT01357694.

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE PAGES

See, Judi E.; Morris, Jason; Craft, Richard; ...

2018-01-24

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

See, Judi E.; Morris, Jason; Craft, Richard

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Organizational Readiness Tools for Global Health Intervention: A Review

PubMed Central

Dearing, James W.

2018-01-01

The ability of non-governmental organizations, government agencies, and corporations to deliver and support the availability and use of interventions for improved global public health depends on their readiness to do so. Yet readiness has proven to be a rather fluid concept in global public health, perhaps due to its multidimensional nature and because scholars and practitioners have applied the concept at different levels such as the individual, organization, and community. This review concerns 30 publically available tools created for the purpose of organizational readiness assessment in order to carry out global public health objectives. Results suggest that these tools assess organizational capacity in the absence of measuring organizational motivation, thus overlooking a key aspect of organizational readiness. Moreover, the tools reviewed are mostly untested by their developers to establish whether the tools do, in fact, measure capacity. These results suggest opportunities for implementation science researchers. PMID:29552552

Isolation of Salmonella from ready-to-eat poultry meat and evaluation of its survival at low temperature, microwaving and simulated gastric fluids.

PubMed

Akbar, Ali; Anal, Anil Kumar

2015-05-01

A study was conducted to evaluate the risk of Salmonella contamination and its survival at different stages in chill ready-to-eat poultry meat products chain. Samples (n = 181) were collected and examined for the presence of Salmonella species. The bacteria were initially identified against polyvalent antisera "O" and "H", followed by confirmation with 16 s rDNA. The single Salmonella, isolate from the tested food samples showed 99.8 % phylogenetic similarity with Salmonella enterica. It was further evaluated for antibiotic sensitivity pattern and found resistant to four antibiotics including ampicillin, chloramphenicol, tetracycline and nalidixic acid. Salmonella associated with ready-to-eat poultry meat products were found active at storage temperature ≥4 °C in a challenge study. It was revealed that shape and weight of the meat pieces have direct influence on the reduction of pathogens during microwave heating. The 30 and 60 s microwaving (with radiation power fixed at 900 W) was found ineffective for the elimination of target bacteria (10(6)-10(7) CFU/g) in meat pieces with weight ≥90 g. Salmonella enterica was able to survive in simulated gastric fluid. The storage temperature and microwaving were found critical point for the transfer of pathogens through ready-to-eat poultry meat products to consumer in chill ready-to-eat poultry meat chain.

The freight shuttle system : advancing commercial readiness.

DOT National Transportation Integrated Search

2011-01-01

This report summarizes the results of research aimed at advancing the commercial readiness of a new hybrid : mode of intermodal freight transportation called the Freight Shuttle System (FSS). The FSS represents a : unique combination of the best feat...

Addressing College Readiness Gaps at the College Door

ERIC Educational Resources Information Center

Friedmann, Elizabeth; Kurlaender, Michal; van Ommeren, Alice

2016-01-01

This chapter examines the Early Assessment Program, which provides California high school students with early signals about their college readiness and allows them to improve their skills and reduce the need for developmental education in college.

AGR-5/6/7 LEUCO Kernel Fabrication Readiness Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, Douglas W.; Bailey, Kirk W.

2015-02-01

In preparation for forming low-enriched uranium carbide/oxide (LEUCO) fuel kernels for the Advanced Gas Reactor (AGR) fuel development and qualification program, Idaho National Laboratory conducted an operational readiness review of the Babcock & Wilcox Nuclear Operations Group – Lynchburg (B&W NOG-L) procedures, processes, and equipment from January 14 – January 16, 2015. The readiness review focused on requirements taken from the American Society Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008, 1a-2009), a recent occurrence at the B&W NOG-L facility related to preparation of acid-deficient uranyl nitrate solution (ADUN), and a relook at concerns noted in a previous review. Topicmore » areas open for the review were communicated to B&W NOG-L in advance of the on-site visit to facilitate the collection of objective evidences attesting to the state of readiness.« less

Household Socioeconomic Status and Parental Investments: Direct and Indirect Relations With School Readiness in Ghana.

PubMed

Wolf, Sharon; McCoy, Dana Charles

2017-07-14

This study examines how parent socioeconomic status (SES) directly and indirectly predicts children's school readiness through pathways of parental investment. Data come from direct assessments with preschool children and surveys with their primary caregivers in Ghana at the start of the 2015-2016 school year (N = 2,137; M age  = 5.2 years). Results revealed SES-related gaps in all parental investment characteristics and child school readiness skills. Preschool involvement served as the primary mediating mechanism in the path from SES to most school readiness skills, though it did not predict executive function. The number of books in the household was marginally positively predictive of early literacy, whereas at-home stimulation was negatively related to motor, literacy, and numeracy skills. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Online suicide risk screening and intervention with college students: a pilot randomized controlled trial.

PubMed

King, Cheryl A; Eisenberg, Daniel; Zheng, Kai; Czyz, Ewa; Kramer, Anne; Horwitz, Adam; Chermack, Stephen

2015-06-01

This pilot randomized controlled trial examined the effect of an online intervention for college students at risk for suicide, Electronic Bridge to Mental Health Services (eBridge), which included personalized feedback and optional online counseling delivered in accordance with motivational interviewing principles. Primary outcomes were readiness to seek information or talk with family and friends about mental health treatment, readiness to seek mental health treatment, and actual treatment linkage. Participants were 76 college students (45 women, 31 men; mean age = 22.9 years, SD = 5.0 years) at a large public university who screened positive for suicide risk, defined by at least 2 of the following: suicidal thoughts, history of suicide attempt, depression, and alcohol abuse. Racial/ethnic self-identifications were primarily Caucasian (n = 54) and Asian (n = 21). Students were randomized to eBridge or the control condition (personalized feedback only, offered in plain report format). Outcomes were measured at 2-month follow-up. Despite relatively modest engagement in online counseling (29% of students posted ≥1 message), students assigned to eBridge reported significantly higher readiness for help-seeking scores, especially readiness to talk to family, talk to friends, and see a mental health professional. Students assigned to eBridge also reported lower stigma levels and were more likely to link to mental health treatment. Findings suggest that offering students personalized feedback and the option of online counseling, using motivational interviewing principles, has a positive impact on students' readiness to consider and engage in mental health treatment. Further research is warranted to determine the robustness of this effect, the mechanism by which improved readiness and treatment linkage occurs, and the longer term impact on student mental health outcomes. (c) 2015 APA, all rights reserved).

Elevated blood lead levels and reading readiness at the start of kindergarten.

PubMed

McLaine, Pat; Navas-Acien, Ana; Lee, Rebecca; Simon, Peter; Diener-West, Marie; Agnew, Jacqueline

2013-06-01

To evaluate the relationship between blood lead levels (BLLs) and reading readiness at kindergarten entry, an early marker of school performance, in a diverse urban school population. Kindergarten reading readiness test scores for children attending public kindergarten in Providence, Rhode Island, were linked to state health department records of blood lead testing by using individual identifiers. The study population (N = 3406) was 59% Hispanic. For each child, the geometric mean BLL was estimated by using all previously reported BLLs. Analyses were adjusted for gender, age, year enrolled, race, child language, and free/reduced lunch status as a measure of socioeconomic status. The median geometric mean BLL was 4.2 µg/dL; 20% of children had at least 1 venous BLL ≥10 µg/dL. Compared with children with BLLs <5 µg/dL, the adjusted prevalence ratios (95% confidence interval [CI]) for failing to achieve the national benchmark for reading readiness were 1.21 (1.19 to 1.23) and 1.56 (1.51 to 1.60) for children with BLLs of 5 to 9 and ≥10 µg/dL, respectively. On average, reading readiness scores decreased by 4.5 (95% CI: -2.9 to -6.2) and 10.0 (95% CI: -7.0 to -13.3) points for children with BLLs of 5 to 9 and ≥10 µg/dL, respectively, compared with BLLs <5 µg/dL. BLLs well below 10 µg/dL were associated with lower reading readiness at kindergarten entry. The high prevalence of elevated BLLs warrants additional investigation in other high-risk US populations. Results suggest benefits from additional collaboration between public health, public education, and community data providers.