Systems Measures of Water Distribution System Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klise, Katherine A.; Murray, Regan; Walker, La Tonya Nicole

2015-01-01

Resilience is a concept that is being used increasingly to refer to the capacity of infrastructure systems to be prepared for and able to respond effectively and rapidly to hazardous events. In Section 2 of this report, drinking water hazards, resilience literature, and available resilience tools are presented. Broader definitions, attributes and methods for measuring resilience are presented in Section 3. In Section 4, quantitative systems performance measures for water distribution systems are presented. Finally, in Section 5, the performance measures and their relevance to measuring the resilience of water systems to hazards is discussed along with needed improvements tomore » water distribution system modeling tools.« less

Methods for thermodynamic evaluation of battery state of health

DOEpatents

Yazami, Rachid; McMenamin, Joseph; Reynier, Yvan; Fultz, Brent T

2013-05-21

Described are systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and battery systems and for characterizing the state of health of electrodes and battery systems. Measurement of physical attributes of electrodes and batteries corresponding to thermodynamically stabilized electrode conditions permit determination of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and battery systems, such as energy, power density, current rate, cycle life and state of health. Also provided are systems and methods for charging a battery according to its state of health.

Factors affecting the diffusion of online end user literature searching.

PubMed

Ash, J S

1999-01-01

The aim of this study was to identify factors that affect diffusion of usage of online end user literature searching. Fifteen factors clustered into three attribute sets (innovation attributes, organizational attributes, and marketing attributes) were measured to study their effect on the diffusion of online searching within institutions. A random sample of sixty-seven academic health sciences centers was selected and then 1,335 library and informatics staff members at those institutions were surveyed by mail with electronic mail follow-up. Multiple regression analysis was performed. The survey yielded a 41% response rate with electronic mail follow-up being particularly effective. Two dependent variables, internal diffusion (spread of diffusion) and infusion (depth of diffusion), were measured. There was little correlation between them, indicating they measured different things. Fifteen independent variables clustered into three attribute sets were measured. The innovation attributes set was significant for both internal diffusion and infusion. Significant individual variables were visibility for internal diffusion and image enhancement effects (negative relation) as well as visibility for infusion (depth of diffusion). Organizational attributes were also significant predictors for both dependent variables. No individual variables were significant for internal diffusion. Communication, management support (negative relation), rewards, and existence of champions were significant for infusion. Marketing attributes were not significant predictors. Successful diffusion of online end user literature searching is dependent on the visibility of the systems, communication among, rewards to, and peers of possible users who promote use (champions). Personal image enhancement effects have a negative relation to infusion, possibly because the use of intermediaries is still seen as the more luxurious way to have searches done. Management support also has a negative relation to infusion, perhaps indicating that depth of diffusion can increase despite top-level management actions.

Fiber-Optic Current Sensor Validation with Triggered Lightning Measurements

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

2013-01-01

A fiber optic current sensor based on the Faraday Effect is developed that is highly suitable for aircraft installation and can measure total current enclosed in a fiber loop down to DC. Other attributes include being small, light-weight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate when exposed to a magnetic field in the direction of light propagation. Measuring the induced light polarization rotation in fiber loops yields the total current enclosed. Two sensor systems were constructed and installed at Camp Blanding, Florida, measuring rocket-triggered lightning. The systems were similar in design but with different laser wavelengths, sensitivities and ranges. Results are compared to a shunt resistor as reference. The 850nm wavelength system tested in summer 2011 showed good result comparison early. However, later results showed gradual amplitude increase with time, attributed to corroded connections affecting the 50-ohm output termination. The 1550nm system also yielded good results in the summer 2012. The successful measurements demonstrate the fiber optic sensor's accuracies in capturing real lightning currents, and represent an important step toward future aircraft installation.

Detection and attribution of climate extremes in the observed record

DOE PAGES

Easterling, David R.; Kunkel, Kenneth E.; Wehner, Michael F.; ...

2016-01-18

We present an overview of practices and challenges related to the detection and attribution of observed changes in climate extremes. Detection is the identification of a statistically significant change in the extreme values of a climate variable over some period of time. Issues in detection discussed include data quality, coverage, and completeness. Attribution takes that detection of a change and uses climate model simulations to evaluate whether a cause can be assigned to that change. Additionally, we discuss a newer field of attribution, event attribution, where individual extreme events are analyzed for the express purpose of assigning some measure ofmore » whether that event was directly influenced by anthropogenic forcing of the climate system.« less

Conceptualising computerized adaptive testing for measurement of latent variables associated with physical objects

NASA Astrophysics Data System (ADS)

Camargo, F. R.; Henson, B.

2015-02-01

The notion of that more or less of a physical feature affects in different degrees the users' impression with regard to an underlying attribute of a product has frequently been applied in affective engineering. However, those attributes exist only as a premise that cannot directly be measured and, therefore, inferences based on their assessment are error-prone. To establish and improve measurement of latent attributes it is presented in this paper the concept of a stochastic framework using the Rasch model for a wide range of independent variables referred to as an item bank. Based on an item bank, computerized adaptive testing (CAT) can be developed. A CAT system can converge into a sequence of items bracketing to convey information at a user's particular endorsement level. It is through item banking and CAT that the financial benefits of using the Rasch model in affective engineering can be realised.

Measuring the Effect of Management on Performance: A Modern Biblical Paradigm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corcoran, W.R.

1999-11-14

The ability to measure the effect of management on performance enables higher management and regulators to prescribe measures to ensure that actual management practices are compatible with results important to stakeholders. The principal stakeholders of higher management are the owners, and the principal stakeholders of the regulators are the public. Extended shutdowns and confirmatory action letters over the past decade or so at Cook, Millstone, Zion, Haddam Neck, Clinton, South Texas, Calvert Cliffs, Pilgrim, and other stations strongly suggest that neither higher management nor regulators have a firm grasp of the measurement of the effect of management on performance. Effortsmore » in the past have focused on attributes of effective management rather than data. For example, the U.S. Nuclear Regulatory Commission uses Appendix B, and the Institute of Nuclear Power Operations uses its ''Excellence in Human Performance'' among other guidance. In both cases, assessment focuses on the observation of what is going on in an organization and comparing it with the criteria. In this paper, the emphasis is on data, not attributes. The data of concern here are results (consequences, events, precursors). The biblical paradigm is that a good tree bears good fruit. It does not take a botanist to tell that the apples are firm and tasty. ''Not everything that counts can be counted, and not everything that can be counted counts'' is a popular defense of attribute-driven assessment. The validity of attribute-driven assessment is not disputed, but this paper explores data-driven assessment that is becoming more practical as information technology advances rapidly. This paper does not address a complete management effect measurement system but only explores one aspect of such a system. The aspect chosen is regulatory violation performance.« less

Medical-device risk management and public safety: using cost-benefit as a measurement of effectiveness

NASA Astrophysics Data System (ADS)

Hughes, Allen A.

1994-12-01

Public safety can be enhanced through the development of a comprehensive medical device risk management. This can be accomplished through case studies using a framework that incorporates cost-benefit analysis in the evaluation of risk management attributes. This paper presents a framework for evaluating the risk management system for regulatory Class III medical devices. The framework consists of the following sixteen attributes of a comprehensive medical device risk management system: fault/failure analysis, premarket testing/clinical trials, post-approval studies, manufacturer sponsored hospital studies, product labeling, establishment inspections, problem reporting program, mandatory hospital reporting, medical literature surveillance, device/patient registries, device performance monitoring, returned product analysis, autopsy program, emergency treatment funds/interim compensation, product liability, and alternative compensation mechanisms. Review of performance histories for several medical devices can reveal the value of information for many attributes, and also the inter-dependencies of the attributes in generating risk information flow. Such an information flow network is presented as a starting point for enhancing medical device risk management by focusing on attributes with high net benefit values and potential to spur information dissemination.

Using a Discrete-Choice Experiment Involving Cost to Value a Classification System Measuring the Quality-of-Life Impact of Self-Management for Diabetes.

PubMed

Rowen, Donna; Stevens, Katherine; Labeit, Alexander; Elliott, Jackie; Mulhern, Brendan; Carlton, Jill; Basarir, Hasan; Ratcliffe, Julie; Brazier, John

2018-01-01

To describe the use of a novel approach in health valuation of a discrete-choice experiment (DCE) including a cost attribute to value a recently developed classification system for measuring the quality-of-life impact (both health and treatment experience) of self-management for diabetes. A large online survey was conducted using DCE with cost on UK respondents from the general population (n = 1497) and individuals with diabetes (n = 405). The data were modeled using a conditional logit model with robust standard errors. The marginal rate of substitution was used to generate willingness-to-pay (WTP) estimates for every state defined by the classification system. Robustness of results was assessed by including interaction effects for household income. There were some logical inconsistencies and insignificant coefficients for the milder levels of some attributes. There were some differences in the rank ordering of different attributes for the general population and diabetic patients. The WTP to avoid the most severe state was £1118.53 per month for the general population and £2356.02 per month for the diabetic patient population. The results were largely robust. Health and self-management can be valued in a single classification system using DCE with cost. The marginal rate of substitution for key attributes can be used to inform cost-benefit analysis of self-management interventions in diabetes using results from clinical studies in which this new classification system has been applied. The method shows promise, but found large WTP estimates exceeding the cost levels used in the survey. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Sensing Attribute Weights: A Novel Basic Belief Assignment Method

PubMed Central

Jiang, Wen; Zhuang, Miaoyan; Xie, Chunhe; Wu, Jun

2017-01-01

Dempster–Shafer evidence theory is widely used in many soft sensors data fusion systems on account of its good performance for handling the uncertainty information of soft sensors. However, how to determine basic belief assignment (BBA) is still an open issue. The existing methods to determine BBA do not consider the reliability of each attribute; at the same time, they cannot effectively determine BBA in the open world. In this paper, based on attribute weights, a novel method to determine BBA is proposed not only in the closed world, but also in the open world. The Gaussian model of each attribute is built using the training samples firstly. Second, the similarity between the test sample and the attribute model is measured based on the Gaussian membership functions. Then, the attribute weights are generated using the overlap degree among the classes. Finally, BBA is determined according to the sensed attribute weights. Several examples with small datasets show the validity of the proposed method. PMID:28358325

Sensing Attribute Weights: A Novel Basic Belief Assignment Method.

PubMed

Jiang, Wen; Zhuang, Miaoyan; Xie, Chunhe; Wu, Jun

2017-03-30

Dempster-Shafer evidence theory is widely used in many soft sensors data fusion systems on account of its good performance for handling the uncertainty information of soft sensors. However, how to determine basic belief assignment (BBA) is still an open issue. The existing methods to determine BBA do not consider the reliability of each attribute; at the same time, they cannot effectively determine BBA in the open world. In this paper, based on attribute weights, a novel method to determine BBA is proposed not only in the closed world, but also in the open world. The Gaussian model of each attribute is built using the training samples firstly. Second, the similarity between the test sample and the attribute model is measured based on the Gaussian membership functions. Then, the attribute weights are generated using the overlap degree among the classes. Finally, BBA is determined according to the sensed attribute weights. Several examples with small datasets show the validity of the proposed method.

Reliability and Validity of a Measure of Preschool Teachers' Attributions for Disruptive Behavior

ERIC Educational Resources Information Center

Carter, Lauren M.; Williford, Amanda P.; LoCasale-Crouch, Jennifer

2014-01-01

Research Findings: This study examined the quality of teacher attributions for child disruptive behavior using a new measure, the Preschool Teaching Attributions measure. A sample of 153 early childhood teachers and 432 children participated. All teachers completed the behavior attributions measure, as well as measures regarding demographics,…

Validity of Walk Score® as a measure of neighborhood walkability in Japan.

PubMed

Koohsari, Mohammad Javad; Sugiyama, Takemi; Hanibuchi, Tomoya; Shibata, Ai; Ishii, Kaori; Liao, Yung; Oka, Koichiro

2018-03-01

Objective measures of environmental attributes have been used to understand how neighborhood environments relate to physical activity. However, this method relies on detailed spatial data, which are often not easily available. Walk Score® is a free, publicly available web-based tool that shows how walkable a given location is based on objectively-derived proximity to several types of local destinations and street connectivity. To date, several studies have tested the concurrent validity of Walk Score as a measure of neighborhood walkability in the USA and Canada. However, it is unknown whether Walk Score is a valid measure in other regions. The current study examined how Walk Score is correlated with objectively-derived attributes of neighborhood walkability, for residential addresses in Japan. Walk Scores were obtained for 1072 residential addresses in urban and rural areas in Japan. Five environmental attributes (residential density, intersection density, number of local destinations, sidewalk availability, and access to public transportation) were calculated using geographic information systems for each address. Pearson's correlation coefficients between Walk Score and these environmental attributes were calculated (conducted in May 2017). Significant positive correlations were observed between Walk Score and environmental attributes relevant to walking. Walk Score was most closely associated with intersection density ( r  = 0.82) and with the number of local destinations ( r  = 0.77). Walk Score appears to be a valid measure of neighborhood walkability in Japan. Walk Score will allow urban designers and public health practitioners to identify walkability of local areas without relying on detailed geographic data.

Optimized spectroscopic scheme for enhanced precision CO measurements with applications to urban source attribution

NASA Astrophysics Data System (ADS)

Nottrott, A.; Hoffnagle, J.; Farinas, A.; Rella, C.

2014-12-01

Carbon monoxide (CO) is an urban pollutant generated by internal combustion engines which contributes to the formation of ground level ozone (smog). CO is also an excellent tracer for emissions from mobile combustion sources. In this work we present an optimized spectroscopic sampling scheme that enables enhanced precision CO measurements. The scheme was implemented on the Picarro G2401 Cavity Ring-Down Spectroscopy (CRDS) analyzer which measures CO2, CO, CH4 and H2O at 0.2 Hz. The optimized scheme improved the raw precision of CO measurements by 40% from 5 ppb to 3 ppb. Correlations of measured CO2, CO, CH4 and H2O from an urban tower were partitioned by wind direction and combined with a concentration footprint model for source attribution. The application of a concentration footprint for source attribution has several advantages. The upwind extent of the concentration footprint for a given sensor is much larger than the flux footprint. Measurements of mean concentration at the sensor location can be used to estimate source strength from a concentration footprint, while measurements of the vertical concentration flux are necessary to determine source strength from the flux footprint. Direct measurement of vertical concentration flux requires high frequency temporal sampling and increases the cost and complexity of the measurement system.

Noncognitive Attributes in Physician Assistant Education.

PubMed

Brenneman, Anthony E; Goldgar, Constance; Hills, Karen J; Snyder, Jennifer H; VanderMeulen, Stephane P; Lane, Steven

2018-03-01

Physician assistant (PA) admissions processes have typically given more weight to cognitive attributes than to noncognitive ones, both because a high level of cognitive ability is needed for a career in medicine and because cognitive factors are easier to measure. However, there is a growing consensus across the health professions that noncognitive attributes such as emotional intelligence, empathy, and professionalism are important for success in clinical practice and optimal care of patients. There is also some evidence that a move toward more holistic admissions practices, including evaluation of noncognitive attributes, can have a positive effect on diversity. The need for these noncognitive attributes in clinicians is being reinforced by changes in the US health care system, including shifting patient demographics and a growing emphasis on team-based care and patient satisfaction, and the need for clinicians to help patients interpret complex medical information. The 2016 Physician Assistant Education Association Stakeholder Summit revealed certain behavioral and affective qualities that employers of PAs value and sometimes find lacking in new graduates. Although there are still gaps in the evidence base, some tools and technologies currently exist to more accurately measure noncognitive variables. We propose some possible strategies and tools that PA programs can use to formalize the way they select for noncognitive attributes. Since PA programs have, on average, only 27 months to educate students, programs may need to focus more resources on selecting for these attributes than teaching them.

Collectivity in Small Collision Systems: An Initial-State Perspective

DOE PAGES

Schlichting, Sören; Tribedy, Prithwish

2016-01-01

Measurements of multiparticle correlations in the collisions of small systems such as p+p, p/d/ 3 He+A show striking similarity to the observations in heavy-ion collisions. A number of observables measured in the high-multiplicity events of these systems resemble features that are attributed to collectivity driven by hydrodynamics. However, alternative explanations based on initial-state dynamics are able to describe many characteristic features of these measurements. In this brief review, we highlight some of the recent developments and outstanding issues in this direction.

The Relationship between National Culture and the Usability of an E-Learning System

ERIC Educational Resources Information Center

Downey, Steve; Wentling, Rose Mary; Wentling, Tim; Wadsworth, Andrew

2004-01-01

This study sought to measure the relationship between national culture and the usability of an e-Learning system by using Hofstede's cultural dimensions and Nielson's usability attributes. The study revealed that high uncertainty avoidance cultures found the system more frustrating to use. The study also revealed that individuals from cultures…

Property attribution in Bohm's interpretation of quantum mechanics

NASA Astrophysics Data System (ADS)

Kraus, Katherine Bedard

1997-09-01

Bohmian ontology includes particles and a wavefield. I explore how these objects give rise to the world we experience, which properties these fundamental objects have, and what kind of property is spin. Also, I present an example of how our choices about property attribution affect our evaluation of the nonlocality in the system. According to the traditional presentation of Bohm's interpretation, a Bohmian world is 'classical' in the sense that pointer states, mental states, etc., are composed of or supervene on particle properties alone. However, I show that this approach does not make sense and argue that a Bohmian account of these states must include both particle properties and wavefield properties. I then clarify the role this plays in a systematic account of Bohmian probability. Also, my discussion shows that Vink's interpretation does not give us the world we experience. I then focus on particle and wavefield properties. I start by evaluating the recent arguments given by Brown et. al. that Bohmian particles do not bear properties such as gravitational mass, charge, etc. I reject their arguments but agree that (with the exception of inertial mass) we should not attribute these properties to Bohmian particles. I continue by examining the confusions underlying Cushing's (1995) proposal that a tunneling time measurement might be able to falsify Bohm's interpretation but neither verify or falsify the Copenhagen interpretation. The recognition that tunneling time is both a wavefield property and a particle property clarifies many of the issues. Next, I explain how Bohm's interpretation models spin measurements, the ways in which spin is contextual, and how Bohmian spin relates to the Kochen-Specker theorem. I also provide several reasons why we should not attribute spin vectors to Bohmian particles. Finally, I use the framework of the Bell Inequalities to discuss a system in which the properties we decide to attribute, and the time at which we evaluate the system, affect the way in which the system evolves nonlocally.

Electrochemical thermodynamic measurement system

DOEpatents

Reynier, Yvan [Meylan, FR; Yazami, Rachid [Los Angeles, CA; Fultz, Brent T [Pasadena, CA

2009-09-29

The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy storage and conversion systems. Systems and methods of the present invention are configured for simultaneously collecting a suite of measurements characterizing a plurality of interconnected electrochemical and thermodynamic parameters relating to the electrode reaction state of advancement, voltage and temperature. Enhanced sensitivity provided by the present methods and systems combined with measurement conditions that reflect thermodynamically stabilized electrode conditions allow very accurate measurement of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and electrochemical systems, such as the energy, power density, current rate and the cycle life of an electrochemical cell.

Plate versus bulk trolley food service in a hospital: comparison of patients' satisfaction.

PubMed

Hartwell, Heather J; Edwards, John S A; Beavis, John

2007-03-01

The aim of this research was to compare plate with bulk trolley food service in hospitals in terms of patient satisfaction. Key factors distinguishing satisfaction with each system would also be identified. A consumer opinion card (n = 180), concentrating on the quality indicators of core foods, was used to measure patient satisfaction and compare two systems of delivery, plate and trolley. Binary logistic regression analysis was used to build a model that would predict food service style on the basis of the food attributes measured. Further investigation used multinomial logistic regression to predict opinion for the assessment of each food attribute within food service style. Results showed that the bulk trolley method of food distribution enables all foods to have a more acceptable texture, and for some foods (potato, P = 0.007; poached fish, P = 0.001; and minced beef, P < or = 0.0005) temperature, and for other foods (broccoli, P < or = 0.0005; carrots, P < or = 0.0005; and poached fish, P = 0.001) flavor, than the plate system of delivery, where flavor is associated with bad opinion or dissatisfaction. A model was built indicating patient satisfaction with the two service systems. This research confirms that patient satisfaction is enhanced by choice at the point of consumption (trolley system); however, portion size was not the controlling dimension. Temperature and texture were the most important attributes that measure patient satisfaction with food, thus defining the focus for hospital food service managers. To date, a model predicting patient satisfaction with the quality of food as served has not been proposed, and as such this work adds to the body of knowledge in this field. This report brings new information about the service style of dishes for improving the quality of food and thus enhancing patient satisfaction.

A comparison of protocols and observer precision for measuring physical stream attributes

USGS Publications Warehouse

Whitacre, H.W.; Roper, B.B.; Kershner, J.L.

2007-01-01

Stream monitoring programs commonly measure physical attributes to assess the effect of land management on stream habitat. Variability associated with the measurement of these attributes has been linked to a number of factors, but few studies have evaluated variability due to differences in protocols. We compared six protocols, five used by the U.S. Department of Agriculture Forest Service and one by the U.S. Environmental Protection Agency, on six streams in Oregon and Idaho to determine whether differences in protocol affect values for 10 physical stream attributes. Results from Oregon and Idaho were combined for groups participating in both states, with significant differences in attribute means for 9 out of the 10 stream attributes. Significant differences occurred in 5 of 10 in Idaho, and 10 of 10 in Oregon. Coefficients of variation, signal-to-noise ratio, and root mean square error were used to evaluate measurement precision. There were differences among protocols for all attributes when states were analyzed separately and as a combined dataset. Measurement differences were influenced by choice of instruments, measurement method, measurement location, attribute definitions, and training approach. Comparison of data gathered by observers using different protocols will be difficult unless a core set of protocols for commonly measured stream attributes can be standardized among monitoring programs.

Measurement of wood/plant cell or composite material attributes with computer assisted tomography

DOEpatents

West, Darrell C.; Paulus, Michael J.; Tuskan, Gerald A.; Wimmer, Rupert

2004-06-08

A method for obtaining wood-cell attributes from cellulose containing samples includes the steps of radiating a cellulose containing sample with a beam of radiation. Radiation attenuation information is collected from radiation which passes through the sample. The source is rotated relative to the sample and the radiation and collecting steps repeated. A projected image of the sample is formed from the collected radiation attenuation information, the projected image including resolvable features of the cellulose containing sample. Cell wall thickness, cell diameter (length) and cell vacoule diameter can be determined. A system for obtaining physical measures from cellulose containing samples includes a radiation source, a radiation detector, and structure for rotating the source relative to said sample. The system forms an image of the sample from the radiation attenuation information, the image including resolvable features of the sample.

Evaluation of the visual performance of image processing pipes: information value of subjective image attributes

NASA Astrophysics Data System (ADS)

Nyman, G.; Häkkinen, J.; Koivisto, E.-M.; Leisti, T.; Lindroos, P.; Orenius, O.; Virtanen, T.; Vuori, T.

2010-01-01

Subjective image quality data for 9 image processing pipes and 8 image contents (taken with mobile phone camera, 72 natural scene test images altogether) from 14 test subjects were collected. A triplet comparison setup and a hybrid qualitative/quantitative methodology were applied. MOS data and spontaneous, subjective image quality attributes to each test image were recorded. The use of positive and negative image quality attributes by the experimental subjects suggested a significant difference between the subjective spaces of low and high image quality. The robustness of the attribute data was shown by correlating DMOS data of the test images against their corresponding, average subjective attribute vector length data. The findings demonstrate the information value of spontaneous, subjective image quality attributes in evaluating image quality at variable quality levels. We discuss the implications of these findings for the development of sensitive performance measures and methods in profiling image processing systems and their components, especially at high image quality levels.

Assessing rangelands

USGS Publications Warehouse

Pyke, David A.

2002-01-01

It is important for land managers and technical assistance specialists to be able to assess the health of rangelands in order to know where to focus management efforts. The complexity of ecological processes, and the inherent expense of directly measuring site integrity, suggests a need for an evaluation process that focuses instead on biological and physical attributes. In a collaborative effort, the USGS, ARS, BLM, and NRCS have jointly developed a system in which 17 indicators are used to gauge three attributes of rangeland health. A qualitative, observational procedure provides an assessment of the functional status of these indicators. This quick assessment technique, by providing an understanding about each attribute, helps interpret rangeland health.

A neuroimaging investigation of attribute framing and individual differences

PubMed Central

Murch, Kevin B.

2014-01-01

Functional magnetic resonance imaging was used to evaluate the neural basis of framing effects. We tested the reflexive and reflective systems model of social cognition as it relates to framing. We also examined the relationships among frame susceptibility, intelligence and personality measures. Participants evaluated whether personal attributes applied to themselves from multiple perspectives and in positive and negative frames. Participants rated whether each statement was descriptive or not and endorsed positive frames more than negative frames. Individual differences on frame decisions enabled us to form high and low frame susceptibility groups. Endorsement of frame-consistent attributes was associated with personality factors, cognitive reflection and intelligence. Reflexive brain regions were associated with positive frames while reflective areas were associated with negative frames. Region of Interest analyses showed that frame-inconsistent responses were associated with increased activation within reflective cognitive control regions including the left dorsolateral prefrontal cortex (PFC), dorsomedial PFC and left ventrolateral PFC. Frame-consistent responses were associated with increased activation in the right orbitofrontal cortex. These results demonstrate that individual differences in frame susceptibility influence personal attribute evaluations. Overall, this study clarifies the neural correlates of the reflective and reflexive systems of social cognition as applied to decisions about social attributions. PMID:23988759

Acoustic sensor for real-time control for the inductive heating process

DOEpatents

Kelley, John Bruce; Lu, Wei-Yang; Zutavern, Fred J.

2003-09-30

Disclosed is a system and method for providing closed-loop control of the heating of a workpiece by an induction heating machine, including generating an acoustic wave in the workpiece with a pulsed laser; optically measuring displacements of the surface of the workpiece in response to the acoustic wave; calculating a sub-surface material property by analyzing the measured surface displacements; creating an error signal by comparing an attribute of the calculated sub-surface material properties with a desired attribute; and reducing the error signal below an acceptable limit by adjusting, in real-time, as often as necessary, the operation of the inductive heating machine.

76 FR 8715 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... Title; Associated Form; and OMB Number: Electronic Health Record (EHR) Usability Survey; OMB Control... longitudinal measure of how end-users perceive the usability of the Department of Defense (DoD) suite of... usability of a system. This usability attribute describes the ease with which people can use the system to...

Patient Preferences for Features of Health Care Delivery Systems: A Discrete Choice Experiment.

PubMed

Mühlbacher, Axel C; Bethge, Susanne; Reed, Shelby D; Schulman, Kevin A

2016-04-01

To estimate the relative importance of organizational-, procedural-, and interpersonal-level features of health care delivery systems from the patient perspective. We designed four discrete choice experiments (DCEs) to measure patient preferences for 21 health system attributes. Participants were recruited through the online patient portal of a large health system. We analyzed the DCE data using random effects logit models. DCEs were performed in which respondents were provided with descriptions of alternative scenarios and asked to indicate which scenario they prefer. Respondents were randomly assigned to one of the three possible health scenarios (current health, new lung cancer diagnosis, or diabetes) and asked to complete 15 choice tasks. Each choice task included an annual out-of-pocket cost attribute. A total of 3,900 respondents completed the survey. The out-of-pocket cost attribute was considered the most important across the four different DCEs. Following the cost attribute, trust and respect, multidisciplinary care, and shared decision making were judged as most important. The relative importance of out-of-pocket cost was consistently lower in the hypothetical context of a new lung cancer diagnosis compared with diabetes or the patient's current health. This study demonstrates the complexity of patient decision making processes regarding features of health care delivery systems. Our findings suggest the importance of these features may change as a function of an individual's medical conditions. © Health Research and Educational Trust.

Real-time product attribute control to manufacture antibodies with defined N-linked glycan levels.

PubMed

Zupke, Craig; Brady, Lowell J; Slade, Peter G; Clark, Philip; Caspary, R Guy; Livingston, Brittney; Taylor, Lisa; Bigham, Kyle; Morris, Arvia E; Bailey, Robert W

2015-01-01

Pressures for cost-effective new therapies and an increased emphasis on emerging markets require technological advancements and a flexible future manufacturing network for the production of biologic medicines. The safety and efficacy of a product is crucial, and consistent product quality is an essential feature of any therapeutic manufacturing process. The active control of product quality in a typical biologic process is challenging because of measurement lags and nonlinearities present in the system. The current study uses nonlinear model predictive control to maintain a critical product quality attribute at a predetermined value during pilot scale manufacturing operations. This approach to product quality control ensures a more consistent product for patients, enables greater manufacturing efficiency, and eliminates the need for extensive process characterization by providing direct measures of critical product quality attributes for real time release of drug product. © 2015 American Institute of Chemical Engineers.

Instrumental measurement of beer taste attributes using an electronic tongue.

PubMed

Rudnitskaya, Alisa; Polshin, Evgeny; Kirsanov, Dmitry; Lammertyn, Jeroen; Nicolai, Bart; Saison, Daan; Delvaux, Freddy R; Delvaux, Filip; Legin, Andrey

2009-07-30

The present study deals with the evaluation of the electronic tongue multisensor system as an analytical tool for the rapid assessment of taste and flavour of beer. Fifty samples of Belgian and Dutch beers of different types (lager beers, ales, wheat beers, etc.), which were characterized with respect to the sensory properties, were measured using the electronic tongue (ET) based on potentiometric chemical sensors developed in Laboratory of Chemical Sensors of St. Petersburg University. The analysis of the sensory data and the calculation of the compromise average scores was made using STATIS. The beer samples were discriminated using both sensory panel and ET data based on PCA, and both data sets were compared using Canonical Correlation Analysis. The ET data were related to the sensory beer attributes using Partial Least Square regression for each attribute separately. Validation was done based on a test set comprising one-third of all samples. The ET was capable of predicting with good precision 20 sensory attributes of beer including such as bitter, sweet, sour, fruity, caramel, artificial, burnt, intensity and body.

Analysis of MRSA-attributed costs of hospitalized patients in Germany.

PubMed

Hübner, C; Hübner, N-O; Hopert, K; Maletzki, S; Flessa, S

2014-10-01

Infections with methicillin-resistant Staphylococcus aureus (MRSA) are assumed to have a high economic impact due to increased hygienic measures and prolonged hospital length of stay. However, surveys on the real expenditure for the prevention and treatment of MRSA are scarce, in particular with regard to the German Diagnosis-Related Groups (G-DRG) payment system. The aim of our study is to empirically assess the additional cost for MRSA management measures and to identify the main cost drivers in the whole process from the hospital's point of view. We conducted a one-year retrospective analysis of MRSA-positive cases in a German university hospital and determined the cost of hygienic measures, laboratory costs, and opportunity costs due to isolation time and extended lengths of stay. A total of 182 cases were included in the analysis. The mean length of hospital stay was 22.75 days and the mean time in isolation was 17.08 days, respectively. Overall, the calculated MRSA-attributable costs were 8,673.04 per case, with opportunity costs making up, by far, the largest share (77.45 %). Our study provides a detailed up-to-date analysis of MRSA-attributed costs in a hospital. It allows a current comparison to previous studies worldwide. Moreover, it offers the prerequisites to investigate the adequate reimbursement of MRSA burden in the DRG payment system and to assess the efficiency of targeted hygienic measures in the prevention of MRSA.

A study of characteristics of intercity transportation systems. Phase 1: Definition of transportation comparison methodology

NASA Technical Reports Server (NTRS)

English, J. M.; Smith, J. L.; Lifson, M. W.

1978-01-01

Decision making in early transportation planning must be responsive to complex value systems representing various policies and objectives. The assessment of alternative transportation concepts during the early initial phases of the system life cycle, when supportive research and technology development activities are defined, requires estimates of transportation, environmental, and socio-economic impacts throughout the system life cycle, which is a period of some 40 or 50 years. A unified methodological framework for comparing intercity passenger and freight transportation systems is described and is extended to include the comparison of long term transportation trends arising from implementation of the various R & D programs. The attributes of existing and future transportation systems are reviewed in order to establish measures for comparison, define value functions, and attribute weightings needed for comparing alternative policy actions for furthering transportation goals. Comparison criteria definitions and an illustrative example are included.

Information prioritization for control and automation of space operations

NASA Technical Reports Server (NTRS)

Ray, Asock; Joshi, Suresh M.; Whitney, Cynthia K.; Jow, Hong N.

1987-01-01

The applicability of a real-time information prioritization technique to the development of a decision support system for control and automation of Space Station operations is considered. The steps involved in the technique are described, including the definition of abnormal scenarios and of attributes, measures of individual attributes, formulation and optimization of a cost function, simulation of test cases on the basis of the cost function, and examination of the simulation scenerios. A list is given comparing the intrinsic importances of various Space Station information data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shaobu; Lu, Shuai; Zhou, Ning

In interconnected power systems, dynamic model reduction can be applied on generators outside the area of interest to mitigate the computational cost with transient stability studies. This paper presents an approach of deriving the reduced dynamic model of the external area based on dynamic response measurements, which comprises of three steps, dynamic-feature extraction, attribution and reconstruction (DEAR). In the DEAR approach, a feature extraction technique, such as singular value decomposition (SVD), is applied to the measured generator dynamics after a disturbance. Characteristic generators are then identified in the feature attribution step for matching the extracted dynamic features with the highestmore » similarity, forming a suboptimal ‘basis’ of system dynamics. In the reconstruction step, generator state variables such as rotor angles and voltage magnitudes are approximated with a linear combination of the characteristic generators, resulting in a quasi-nonlinear reduced model of the original external system. Network model is un-changed in the DEAR method. Tests on several IEEE standard systems show that the proposed method gets better reduction ratio and response errors than the traditional coherency aggregation methods.« less

Guest Editorial Image Quality

NASA Astrophysics Data System (ADS)

Cheatham, Patrick S.

1982-02-01

The term image quality can, unfortunately, apply to anything from a public relations firm's discussion to a comparison between corner drugstores' film processing. If we narrow the discussion to optical systems, we clarify the problem somewhat, but only slightly. We are still faced with a multitude of image quality measures all different, and all couched in different terminology. Optical designers speak of MTF values, digital processors talk about summations of before and after image differences, pattern recognition engineers allude to correlation values, and radar imagers use side-lobe response values measured in decibels. Further complexity is introduced by terms such as information content, bandwidth, Strehl ratios, and, of course, limiting resolution. The problem is to compare these different yardsticks and try to establish some concrete ideas about evaluation of a final image. We need to establish the image attributes which are the most important to perception of the image in question and then begin to apply the different system parameters to those attributes.

Spatiotemporal conceptual platform for querying archaeological information systems

NASA Astrophysics Data System (ADS)

Partsinevelos, Panagiotis; Sartzetaki, Mary; Sarris, Apostolos

2015-04-01

Spatial and temporal distribution of archaeological sites has been shown to associate with several attributes including marine, water, mineral and food resources, climate conditions, geomorphological features, etc. In this study, archeological settlement attributes are evaluated under various associations in order to provide a specialized query platform in a geographic information system (GIS). Towards this end, a spatial database is designed to include a series of archaeological findings for a secluded geographic area of Crete in Greece. The key categories of the geodatabase include the archaeological type (palace, burial site, village, etc.), temporal information of the habitation/usage period (pre Minoan, Minoan, Byzantine, etc.), and the extracted geographical attributes of the sites (distance to sea, altitude, resources, etc.). Most of the related spatial attributes are extracted with readily available GIS tools. Additionally, a series of conceptual data attributes are estimated, including: Temporal relation of an era to a future one in terms of alteration of the archaeological type, topologic relations of various types and attributes, spatial proximity relations between various types. These complex spatiotemporal relational measures reveal new attributes towards better understanding of site selection for prehistoric and/or historic cultures, yet their potential combinations can become numerous. Therefore, after the quantification of the above mentioned attributes, they are classified as of their importance for archaeological site location modeling. Under this new classification scheme, the user may select a geographic area of interest and extract only the important attributes for a specific archaeological type. These extracted attributes may then be queried against the entire spatial database and provide a location map of possible new archaeological sites. This novel type of querying is robust since the user does not have to type a standard SQL query but graphically select an area of interest. In addition, according to the application at hand, novel spatiotemporal attributes and relations can be supported, towards the understanding of historical settlement patterns.

Bridge-Scour Data Management System user's manual

USGS Publications Warehouse

Landers, Mark N.; Mueller, David S.; Martin, Gary R.

1996-01-01

The Bridge-Scour Data Management System (BSDMS) supports preparation, compilation, and analysis of bridge-scour data. The BSDMS provides interactive storage, retrieval, selection, editing, and display of bridge-scour data sets. Bridge-scour data sets include more than 200 site and measurement attributes of the channel geometry, flow hydraulics, hydrology, sediment, geomorphic-setting, location, and bridge specifications. This user's manual provides a general overview of the structure and organization of BSDMS data sets and detailed instructions to operate the program. Attributes stored by the BSDMS are described along with an illustration of the input screen where the attribute can be entered or edited. Measured scour depths can be compared with scour depths predicted by selected published equations using the BSDMS. The selected published equations available in the computational portion of the BSDMS are described. This manual is written for BSDMS, version 2.0. The data base will facilitate: (1) developing improved estimators of scour for specific regions or conditions; (2) describing scour processes; and (3) reducing risk from scour at bridges. BSDMS is available in DOS and UNIX versions. The program was written to be portable and, therefore, can be used on multiple computer platforms. Installation procedures depend on the computer platform, and specific installation instructions are distributed with the software. Sample data files and data sets of 384 pier-scour measurements from 56 bridges in 14 States are also distributed with the software.

Theater Nuclear Force Survivability, Security and Safety Instrumentation. Volume I. Engineering Development Phase - Fiscal Year 1980.

DTIC Science & Technology

1980-12-31

development and acquisition program. It is generally agreed that the measures of merit in system acquisition programs are costs, schedule, and achievement...very few system acquisitions have successfully achieved their predicted measures of merit. The reasons for the poor record have been attributed to a...and Logistics -- The instrumentation must be easily maintained and easily transported to remote test sites in CONUS and Europe. 13 4. Useful Lifetime

ATTRIBUTES AND THRESHOLDS IN MEASUREMENTS FOR TRANSPARENCY INITIATIVES

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. W. JOHNSON

The collection of programs broadly termed Transparency Initiatives frequently involves physics measurements that are applied to items with sensitive or classified properties. The inability or reluctance to perform quantitative measurements, in the safeguards tradition, to such items, and then to expose the results to international examination, has impelled development of an attributes approach to measurements, following the philosophy if it looks like a duck, walks like a duck and quacks like a duck, call it a duck, This approach avoids certain of the classification issues that would otherwise be associated with such measurements. Use of the attributes approach, however, continuesmore » to pose problems of interpretation, in light of the need to establish numerical thresholds whereby data obtained from the measurements can be evaluated to determine whether the attribute is present. In this paper we examine the foundations of the attributes approach and the steps used to determine appropriate attributes and thresholds, using examples from contemporary threat-reduction initiatives where possible. Implications for the detector technologies used in the measurements will be discussed, as will the characteristics of so-called information barriers intended to prevent inadvertent release of sensitive information during attributes measurements.« less

The Intelligent Technologies of Electronic Information System

NASA Astrophysics Data System (ADS)

Li, Xianyu

2017-08-01

Based upon the synopsis of system intelligence and information services, this paper puts forward the attributes and the logic structure of information service, sets forth intelligent technology framework of electronic information system, and presents a series of measures, such as optimizing business information flow, advancing data decision capability, improving information fusion precision, strengthening deep learning application and enhancing prognostic and health management, and demonstrates system operation effectiveness. This will benefit the enhancement of system intelligence.

[Study on smoking-attributed mortality by using all causes of death surveillance system in Tianjin].

PubMed

Jiang, Guohong; Zhang, Hui; Li, Wei; Wang, Dezheng; Xu, Zhongliang; Song, Guide; Zhang, Ying; Shen, Chengfeng; Zheng, Wenlong; Xue, Xiaodan; Shen, Wenda

2016-03-01

To understand the smoking-attributed mortality by inclusion of smoking information into all causes of death surveillance. Since 2010, the information about smoking status, smoking history and the number of cigarettes smoked daily had been added in death surveillance system. The measures of training, supervision, check, sampling survey and telephone verifying were taken to increase death reporting rate and reduce data missing rate and underreporting rate. Multivariate logistic regression analysis was conducted to identify risk factors for smoking-attributed mortality. During the study period (2010-2014), the annual death reporting rates ranged from 6.5‰ to 7.0‰. The reporting rates of smoking status, smoking history and the number of cigarettes smoked daily were 95.53%, 98.63% and 98.58%, respectively. Compared with the nonsmokers, the RR of males was 1.38 (1.33-1.43) for all causes of death and 3.07 (2.91-3.24) for lung cancer due to smoking, the RR of females was 1.46 (1.39-1.54) for all causes of death and 4.07 (3.81-4.35) for lung cancer due to smoking, respectively. The study of smoking attributed mortality can be developed with less investment by using the stable and effective all causes of death surveillance system in Tianjin.

A neuroimaging investigation of attribute framing and individual differences.

PubMed

Murch, Kevin B; Krawczyk, Daniel C

2014-10-01

Functional magnetic resonance imaging was used to evaluate the neural basis of framing effects. We tested the reflexive and reflective systems model of social cognition as it relates to framing. We also examined the relationships among frame susceptibility, intelligence and personality measures. Participants evaluated whether personal attributes applied to themselves from multiple perspectives and in positive and negative frames. Participants rated whether each statement was descriptive or not and endorsed positive frames more than negative frames. Individual differences on frame decisions enabled us to form high and low frame susceptibility groups. Endorsement of frame-consistent attributes was associated with personality factors, cognitive reflection and intelligence. Reflexive brain regions were associated with positive frames while reflective areas were associated with negative frames. Region of Interest analyses showed that frame-inconsistent responses were associated with increased activation within reflective cognitive control regions including the left dorsolateral prefrontal cortex (PFC), dorsomedial PFC and left ventrolateral PFC. Frame-consistent responses were associated with increased activation in the right orbitofrontal cortex. These results demonstrate that individual differences in frame susceptibility influence personal attribute evaluations. Overall, this study clarifies the neural correlates of the reflective and reflexive systems of social cognition as applied to decisions about social attributions. © The Author (2013). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Auditory object salience: human cortical processing of non-biological action sounds and their acoustic signal attributes

PubMed Central

Lewis, James W.; Talkington, William J.; Tallaksen, Katherine C.; Frum, Chris A.

2012-01-01

Whether viewed or heard, an object in action can be segmented as a distinct salient event based on a number of different sensory cues. In the visual system, several low-level attributes of an image are processed along parallel hierarchies, involving intermediate stages wherein gross-level object form and/or motion features are extracted prior to stages that show greater specificity for different object categories (e.g., people, buildings, or tools). In the auditory system, though relying on a rather different set of low-level signal attributes, meaningful real-world acoustic events and “auditory objects” can also be readily distinguished from background scenes. However, the nature of the acoustic signal attributes or gross-level perceptual features that may be explicitly processed along intermediate cortical processing stages remain poorly understood. Examining mechanical and environmental action sounds, representing two distinct non-biological categories of action sources, we had participants assess the degree to which each sound was perceived as object-like versus scene-like. We re-analyzed data from two of our earlier functional magnetic resonance imaging (fMRI) task paradigms (Engel et al., 2009) and found that scene-like action sounds preferentially led to activation along several midline cortical structures, but with strong dependence on listening task demands. In contrast, bilateral foci along the superior temporal gyri (STG) showed parametrically increasing activation to action sounds rated as more “object-like,” independent of sound category or task demands. Moreover, these STG regions also showed parametric sensitivity to spectral structure variations (SSVs) of the action sounds—a quantitative measure of change in entropy of the acoustic signals over time—and the right STG additionally showed parametric sensitivity to measures of mean entropy and harmonic content of the environmental sounds. Analogous to the visual system, intermediate stages of the auditory system appear to process or extract a number of quantifiable low-order signal attributes that are characteristic of action events perceived as being object-like, representing stages that may begin to dissociate different perceptual dimensions and categories of every-day, real-world action sounds. PMID:22582038

Theory of Effectiveness Measurement

DTIC Science & Technology

2006-09-01

features, or properties). These attributes can be either directly or indirectly observable ( Cropley , 1998:238). Additionally, a system embodies a set...John Shawe-Taylor, An Introduction to Support Vector Machines, Cambridge University Press, Cambridge, 2000. Cropley , D. H., “Towards Formulating a

Application Principles for Multicolored Displays: A Workshop Report

DTIC Science & Technology

1990-01-01

Currently two systems, CIELUV and CIELAB , are recommended by the CIE for preliminary trials. Both systems start with measurement of the CIE chromaticity...difficulties in the extrapolation. In order to predict color appearance and take into account color constancy, both the CIELUV and CIELAB systems...both CIELUV and CIELAB it is possible to calculate approximate correlates of the perceived attributes of lightness, hue, saturation, and perceived

Habitat suitability index models: A low effort system for planned coolwater and coldwater reservoirs

USGS Publications Warehouse

McConnell, William J.; Bergersen, Eric P.; Williamson, Kathryn L.

1982-01-01

A novel approach to reservoir habitat evaluation is described and habitat ratings are proposed for five fish species in coolwater and coldwater reservoirs. This approach has the advantages of procedural simplicity and ready availability of input data; consequently, it has potential utility as a screening tool in the early stages of the reservoir planning process.Habitat suitability is determined on the basis of a composite score for five "primary" reservoir attributes (temperature, turbidity, nonliving cover, drawdown, and shallow cove frequency). The va 1ue of each primary reservoi r attribute is determined from one or more "secondary" attributes, which are easily measured variables. Secondary attributes (for example, length of growing season or mean July air temperature) can be directly obtained, prior to construction, from published documents, maps, reservoir plans, and on-site inspections of the proposed reservoir basin.Evaluation criteria and ratings are presented for rainbow trout (Salmo gairdneri), white sucker (Catostomus commersonii), yellow perch (Perca flavescens), common carp (Cyprinus carpio), and black crappie (PomoxTS nigromaculatus). These ratings were derived from literature reviews and from persona 1 experi ence and knowl edge of the authors; however, the system is easily adaptable to change upon further review, differences of opinion by experts, or evaluation of test results under diverse conditions.This technique can be used to evaluate the suitability of a proposed reservoir for different species and to compare the outcomes of alternative construction plans. It could also be expanded to include additional species, which will improve its utility. The system should be useful in determining losses relative to benefits, trade-offs, and potential mitigation measures in reservoir projects.

MedXN: an open source medication extraction and normalization tool for clinical text

PubMed Central

Sohn, Sunghwan; Clark, Cheryl; Halgrim, Scott R; Murphy, Sean P; Chute, Christopher G; Liu, Hongfang

2014-01-01

Objective We developed the Medication Extraction and Normalization (MedXN) system to extract comprehensive medication information and normalize it to the most appropriate RxNorm concept unique identifier (RxCUI) as specifically as possible. Methods Medication descriptions in clinical notes were decomposed into medication name and attributes, which were separately extracted using RxNorm dictionary lookup and regular expression. Then, each medication name and its attributes were combined together according to RxNorm convention to find the most appropriate RxNorm representation. To do this, we employed serialized hierarchical steps implemented in Apache's Unstructured Information Management Architecture. We also performed synonym expansion, removed false medications, and employed inference rules to improve the medication extraction and normalization performance. Results An evaluation on test data of 397 medication mentions showed F-measures of 0.975 for medication name and over 0.90 for most attributes. The RxCUI assignment produced F-measures of 0.932 for medication name and 0.864 for full medication information. Most false negative RxCUI assignments in full medication information are due to human assumption of missing attributes and medication names in the gold standard. Conclusions The MedXN system (http://sourceforge.net/projects/ohnlp/files/MedXN/) was able to extract comprehensive medication information with high accuracy and demonstrated good normalization capability to RxCUI as long as explicit evidence existed. More sophisticated inference rules might result in further improvements to specific RxCUI assignments for incomplete medication descriptions. PMID:24637954

Field and laboratory measurements of biomass burning and vehicle exhaust using a PTR-MS

NASA Astrophysics Data System (ADS)

VanderSchelden, Graham Samuel

The Proton Transfer Reaction Mass Spectrometer (PTR-MS) is a powerful tool for analyzing organic compounds in air and has been applied in field and laboratory applications to assess emissions from biomass burning and vehicles. Biomass burning is an important source of air pollution globally in the form of wild fires, burning of crop stubble, and combustion of organic material for home energy. In the United States, residential wood combustion combined with low inversion heights in winter time has caused air quality problems. Through field deployment of the PTR-MS in Xi'an China during August of 2011, it was determined that 27%, 16%, 26%, and 12% of ambient carbon monoxide (CO), acetaldehyde, benzene, and toluene could be attributed to biomass burning. The PTR-MS was also deployed to Yakima, Washington in January of 2013, finding that residential wood combustion was a substantial source of air toxics and PM. Residential wood combustion contributed 100%, 73%, 69%, 55%, 36%, 19%, 19%, and 17% of organic PM1, formaldehyde, acetaldehyde, black carbon, benzene, toluene, C2-alkylbenzenes, and CO respectively. Diesel vehicles are becoming a larger fraction of the vehicle fleet and can be held responsible for a substantial fraction of air pollution emissions from on and off road mobile sources. Diesel engines are a source of low volatility products that are difficult to measure and are thought to be important in the formation of secondary organic aerosol (SOA). This work focuses on measuring important diesel exhaust compounds with the PTR-MS and assessing oxidation processes of these compounds. When the PTR-MS was deployed to the field along with a thermal desorption pre-concentration system, we estimated that diesel vehicles were about 3-15% of the vehicle activity influencing our study site in Yakima, WA using the ratio of m/z 157 to m/z 129. SOA yields of diesel exhaust compounds were assessed and about 48% of the SOA was attributed to compounds measured by the PTR-MS; with 21% attributed to alkylbenzenes, 20% attributed to alkanes, 3% attributed to alkylnaphthalenes, 3% attributed to molecular weight 178 polycyclic aromatic hydrocarbons, and 1% attributable to cycloalkanes.

23 CFR 1200.22 - State traffic safety information system improvements grants.

Code of Federal Regulations, 2013 CFR

2013-04-01

... measures to be used to demonstrate quantitative progress in the accuracy, completeness, timeliness... to implement, provides an explanation. (d) Requirement for quantitative improvement. A State shall demonstrate quantitative improvement in the data attributes of accuracy, completeness, timeliness, uniformity...

23 CFR 1200.22 - State traffic safety information system improvements grants.

Code of Federal Regulations, 2014 CFR

2014-04-01

... measures to be used to demonstrate quantitative progress in the accuracy, completeness, timeliness... to implement, provides an explanation. (d) Requirement for quantitative improvement. A State shall demonstrate quantitative improvement in the data attributes of accuracy, completeness, timeliness, uniformity...

[Healthcare mistreatment attributed to discrimination among mapuche patients and discontinuation of diabetes care].

PubMed

Ortiz, Manuel S; Baeza-Rivera, María José; Salinas-Oñate, Natalia; Flynn, Patricia; Betancourt, Héctor

2016-10-01

The negative impact of perceived discrimination on health outcomes is well established. However, less attention has been directed towards understanding the effect of perceived discrimination on health behaviors relevant for the treatment of diabetes in ethnic minorities. To examine the effects of healthcare mistreatment attributed to discrimination on the continuity of Type 2 Diabetes (DM2) care among mapuche patients in a southern region of Chile. A non-probabilistic sample of 85 mapuche DM2 patients were recruited from public and private health systems. Eligibility criteria included having experienced at least one incident of interpersonal healthcare mistreatment. All participants answered an instrument designed to measure healthcare mistreatment and continuity of diabetes care. Healthcare mistreatment attributed to ethnic discrimination was associated with the discontinuation of diabetes care. Healthcare mistreatment attributed to discrimination negatively impacted the continuity of diabetes care, a fact which may provide a better understanding of health disparities in ethnic minorities.

Irrigation effects on soil attributes and grapevine performance in a 'Godello' vineyard of NW Spain

NASA Astrophysics Data System (ADS)

Fandiño, María; Trigo-Córdoba, Emiliano; Martínez, Emma M.; Bouzas-Cid, Yolanda; Rey, Benjamín J.; Cancela, Javier J.; Mirás-Avalos, Jose M.

2014-05-01

Irrigation systems are increasingly being used in Galician vineyards. However, a lack of information about irrigation management can cause a bad use of these systems and, consequently, reductions in berry quality and loss of water resources. In this context, experiences with Galician cultivars may provide useful information. A field experiment was carried out over two seasons (2012-2013) on Vitis vinifera (L.) cv. 'Godello' in order to assess the effects of irrigation on soil attributes, grapevine performance and berry composition. The field site was a commercial vineyard located in A Rúa (Ourense-NW Spain). Rain-fed vines (R) were compared with two irrigation systems: surface drip irrigation (DI) and subsurface drip irrigation (SDI). Physical and chemical characteristics of soil were analyzed after installing irrigation systems at the beginning of each season, in order to assess the effects that irrigation might have on soil attributes. Soil water content, leaf and stem water potentials and stomatal conductance were periodically measured over the two seasons. Yield components including number of clusters, yield per plant and cluster average weight were taken. Soluble solids, pH, total acidity and amino acids contents were measured on the grapes at harvest. Pruning weight was also recorded. Soil attributes did not significantly vary due to the irrigation treatments. Stem water potentials were significantly lower for R plants on certain dates through the season, whereas stomatal conductance was similar for the three treatments in 2013, while in 2012 SDI plants showed greater stomatal conductance values. SDI plants yielded more than those R due to both a greater number of clusters per plant and to heavier clusters. Pruning weight was significantly higher in SI plants. Berry composition was similar for the three treatments except for the amino acids content, which was higher under SDI conditions. These results may be helpful for a sustainable management of irrigation in Galician vineyards.

The habenula governs the attribution of incentive salience to reward predictive cues

PubMed Central

Danna, Carey L.; Shepard, Paul D.; Elmer, Greg I.

2013-01-01

The attribution of incentive salience to reward associated cues is critical for motivation and the pursuit of rewards. Disruptions in the integrity of the neural systems controlling these processes can lead to avolition and anhedonia, symptoms that cross the diagnostic boundaries of many neuropsychiatric illnesses. Here, we consider whether the habenula (Hb), a region recently demonstrated to encode negatively valenced events, also modulates the attribution of incentive salience to a neutral cue predicting a food reward. The Pavlovian autoshaping paradigm was used in the rat as an investigative tool to dissociate Pavlovian learning processes imparting strictly predictive value from learning that attributes incentive motivational value. Electrolytic lesions of the fasciculus retroflexus (fr), the sole pathway through which descending Hb efferents are conveyed, significantly increased incentive salience as measured by conditioned approaches to a cue light predictive of reward. Conversely, generation of a fictive Hb signal via fr stimulation during CS+ presentation significantly decreased the incentive salience of the predictive cue. Neither manipulation altered the reward predictive value of the cue as measured by conditioned approach to the food. Our results provide new evidence supporting a significant role for the Hb in governing the attribution of incentive motivational salience to reward predictive cues and further imply that pathological changes in Hb activity could contribute to the aberrant pursuit of debilitating goals or avolition and depression-like symptoms. PMID:24368898

Towards a balanced performance measurement system in a public health care organization.

PubMed

Yuen, Peter P; Ng, Artie W

2012-01-01

This article attempts to devise an integrated performance measurement framework to assess the Hong Kong Hospital Authority (HA) management system by harnessing previous performance measurement systems. An integrated evaluative framework based on the balanced score card (BSC) was developed and applied using the case study method and longitudinal data to evaluate the HA's performance management system. The authors unveil evolving HA performance indicators (P1). Despite the HA staffs explicit quality emphasis, cost control remains the primary focus in their performance measurements. RESEARCH LHNITATIONS/IMPLICATIONS: Data used in this study are from secondary sources, disclosed mostly by HA staff. This study shows public sector staff often attach too much importance to cost control and easily measurable activities at the expense of quality and other less easily measurable attributes'. A balanced performance measurement system, linked to health targets, with a complementary budgeting process that supports pertinent resource allocation is yet to be implemented in Hong Kong's public hospitals.

Real-time hostile attribution measurement and aggression in children.

PubMed

Yaros, Anna; Lochman, John E; Rosenbaum, Jill; Jimenez-Camargo, Luis Alberto

2014-01-01

Hostile attributions are an important predictor of aggression in children, but few studies have measured hostile attributions as they occur in real-time. The current study uses an interactive video racing game to measure hostile attributions while children played against a presumed peer. A sample of 75 children, ages 10-13, used nonverbal and verbal procedures to respond to ambiguous provocation by their opponent. Hostile attributions were significantly positively related to parent-rated reactive aggression, when controlling for proactive aggression. Hostile attributions using a nonverbal response procedure were negatively related to proactive aggression, when controlling for reactive aggression. Results suggest hostile attributions in real-time occur quickly and simultaneously with social interaction, which differs from the deliberative, controlled appraisals measured with vignette-based instruments. The relation between real-time hostile attributions and reactive aggression could be accounted for by the impulsive response style that is characteristic of reactive aggression, whereas children exhibiting proactive aggression may be more deliberate and intentional in their responding, resulting in a negative relation with real-time hostile attributions. These findings can be used both to identify children at risk for aggression and to enhance preventive interventions. © 2014 Wiley Periodicals, Inc.

Kids in the city study: research design and methodology.

PubMed

Oliver, Melody; Witten, Karen; Kearns, Robin A; Mavoa, Suzanne; Badland, Hannah M; Carroll, Penelope; Drumheller, Chelsea; Tavae, Nicola; Asiasiga, Lanuola; Jelley, Su; Kaiwai, Hector; Opit, Simon; Lin, En-Yi Judy; Sweetsur, Paul; Barnes, Helen Moewaka; Mason, Nic; Ergler, Christina

2011-07-24

Physical activity is essential for optimal physical and psychological health but substantial declines in children's activity levels have occurred in New Zealand and internationally. Children's independent mobility (i.e., outdoor play and traveling to destinations unsupervised), an integral component of physical activity in childhood, has also declined radically in recent decades. Safety-conscious parenting practices, car reliance and auto-centric urban design have converged to produce children living increasingly sedentary lives. This research investigates how urban neighborhood environments can support or enable or restrict children's independent mobility, thereby influencing physical activity accumulation and participation in daily life. The study is located in six Auckland, New Zealand neighborhoods, diverse in terms of urban design attributes, particularly residential density. Participants comprise 160 children aged 9-11 years and their parents/caregivers. Objective measures (global positioning systems, accelerometers, geographical information systems, observational audits) assessed children's independent mobility and physical activity, neighborhood infrastructure, and streetscape attributes. Parent and child neighborhood perceptions and experiences were assessed using qualitative research methods. This study is one of the first internationally to examine the association of specific urban design attributes with child independent mobility. Using robust, appropriate, and best practice objective measures, this study provides robust epidemiological information regarding the relationships between the built environment and health outcomes for this population.

Can global navigation satellite system signals reveal the ecological attributes of forests?

NASA Astrophysics Data System (ADS)

Liu, Jingbin; Hyyppä, Juha; Yu, Xiaowei; Jaakkola, Anttoni; Liang, Xinlian; Kaartinen, Harri; Kukko, Antero; Zhu, Lingli; Wang, Yunsheng; Hyyppä, Hannu

2016-08-01

Forests have important impacts on the global carbon cycle and climate, and they are also related to a wide range of industrial sectors. Currently, one of the biggest challenges in forestry research is effectively and accurately measuring and monitoring forest variables, as the exploitation potential of forest inventory products largely depends on the accuracy of estimates and on the cost of data collection. A low-cost crowdsourcing solution is needed for forest inventory to collect forest variables. Here, we propose global navigation satellite system (GNSS) signals as a novel type of observables for predicting forest attributes and show the feasibility of utilizing GNSS signals for estimating important attributes of forest plots, including mean tree height, mean diameter at breast height, basal area, stem volume and tree biomass. The prediction accuracies of the proposed technique were better in boreal forest conditions than those of the conventional techniques of 2D remote sensing. More importantly, this technique provides a novel, cost-effective way of collecting large-scale forest measurements in the crowdsourcing context. This technique can be applied by, for example, harvesters or persons hiking or working in forests because GNSS devices are widely used, and the field operation of this technique is simple and does not require professional forestry skills.

Kids in the city study: research design and methodology

PubMed Central

2011-01-01

Background Physical activity is essential for optimal physical and psychological health but substantial declines in children's activity levels have occurred in New Zealand and internationally. Children's independent mobility (i.e., outdoor play and traveling to destinations unsupervised), an integral component of physical activity in childhood, has also declined radically in recent decades. Safety-conscious parenting practices, car reliance and auto-centric urban design have converged to produce children living increasingly sedentary lives. This research investigates how urban neighborhood environments can support or enable or restrict children's independent mobility, thereby influencing physical activity accumulation and participation in daily life. Methods/Design The study is located in six Auckland, New Zealand neighborhoods, diverse in terms of urban design attributes, particularly residential density. Participants comprise 160 children aged 9-11 years and their parents/caregivers. Objective measures (global positioning systems, accelerometers, geographical information systems, observational audits) assessed children's independent mobility and physical activity, neighborhood infrastructure, and streetscape attributes. Parent and child neighborhood perceptions and experiences were assessed using qualitative research methods. Discussion This study is one of the first internationally to examine the association of specific urban design attributes with child independent mobility. Using robust, appropriate, and best practice objective measures, this study provides robust epidemiological information regarding the relationships between the built environment and health outcomes for this population. PMID:21781341

On the reliability, uncertainty, scaling and transferability of ecological production functions in ecological periodic tables

EPA Science Inventory

Ecological periodic tables are an information organizing system. Their elements are categorical habitat types. Their attributes are quantitative, predictably recurring (periodic) properties of a target biotic community. Since they translate habitats as inputs into measures of ...

Robotics in the Laboratory: A Generic Approach.

ERIC Educational Resources Information Center

Sharp, Robert L.; And Others

1988-01-01

Discusses the use of robotics in the analytical chemistry laboratory. Suggests using a modular setup to best use robots and laboratory space. Proposes a sample preparation system which can perform aliquot measurement, dilution, mixing, separation, and sample transfer. Recognizes attributes and shortcomings. (ML)

Differences between Subjective Balanced Occlusion and Measurements Reported With T-Scan III

PubMed Central

Lila-Krasniqi, Zana; Shala, Kujtim; Krasniqi, Teuta Pustina; Bicaj, Teuta; Ahmedi, Enis; Dula, Linda; Dragusha, Arlinda Tmava; Guguvcevski, Ljuben

2017-01-01

BACKGROUND: The aetiology of Temporomandibular disorder is multifactorial, and numerous studies have addressed that occlusion may be of great importance in the pathogenesis of Temporomandibular disorder. AIM: The aim of this study is to determine if any direct relationship exists between balanced occlusion and Temporomandibular disorder and to evaluate the differences between subjective balanced occlusion and measurements reported with T-scan III electronic system. MATERIAL AND METHODS: A total of 54 subjects were divided into three groups, selection based on anamnesis-responded to a Fonseca questionnaire and clinical measurements analysed with electronic system T-scan III. In the I study group were participants with fixed dentures with prosthetic ceramic restorations. In the II study group were symptomatic participants with TMD. In the third control group were healthy participants with full arch dentition that completed a subjective questionnaire that documented the absence of jaw pain, joint noise, locking and subjects without a history of TMD. The occlusal balance was reported subjectively through Fonseca questionnaire and compared with occlusion analysed with electronic system T-scan III. RESULTS: For attributive data were used percentage of the structure. Differences in P < 0.05 were considered significant. After distributing attributive data of occlusal balance subjectively reported and compared with measurements analysed with electronic system T-scan III were found significant difference P < 0.001 in all three groups. CONCLUSION: In our study, it was concluded that there were statistically significant differences of balanced occlusion in all three groups. Also it was concluded that subjective data are not exact with measurements reported with electronic device T-scan III. PMID:28932311

An importance-performance analysis of hospital information system attributes: A nurses' perspective.

PubMed

Cohen, Jason F; Coleman, Emma; Kangethe, Matheri J

2016-02-01

Health workers have numerous concerns about hospital IS (HIS) usage. Addressing these concerns requires understanding the system attributes most important to their satisfaction and productivity. Following a recent HIS implementation, our objective was to identify priorities for managerial intervention based on user evaluations of the performance of the HIS attributes as well as the relative importance of these attributes to user satisfaction and productivity outcomes. We collected data along a set of attributes representing system quality, data quality, information quality, and service quality from 154 nurse users. Their quantitative responses were analysed using the partial least squares approach followed by an importance-performance analysis. Qualitative responses were analysed using thematic analysis to triangulate and supplement the quantitative findings. Two system quality attributes (responsiveness and ease of learning), one information quality attribute (detail), one service quality attribute (sufficient support), and three data quality attributes (records complete, accurate and never missing) were identified as high priorities for intervention. Our application of importance-performance analysis is unique in HIS evaluation and we have illustrated its utility for identifying those system attributes for which underperformance is not acceptable to users and therefore should be high priorities for intervention. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Data Citation in Neuroimaging: Proposed Best Practices for Data Identification and Attribution

PubMed Central

Honor, Leah B.; Haselgrove, Christian; Frazier, Jean A.; Kennedy, David N.

2016-01-01

Data sharing and reuse, while widely accepted as good ideas, have been slow to catch on in any concrete and consistent way. One major hurdle within the scientific community has been the lack of widely accepted standards for citing that data, making it difficult to track usage and measure impact. Within the neuroimaging community, there is a need for a way to not only clearly identify and cite datasets, but also to derive new aggregate sets from multiple sources while clearly maintaining lines of attribution. This work presents a functional prototype of a system to integrate Digital Object Identifiers (DOI) and a standardized metadata schema into a XNAT-based repository workflow, allowing for identification of data at both the project and image level. These item and source level identifiers allow any newly defined combination of images, from any number of projects, to be tagged with a new group-level DOI that automatically inherits the individual attributes and provenance information of its constituent parts. This system enables the tracking of data reuse down to the level of individual images. The implementation of this type of data identification system would impact researchers and data creators, data hosting facilities, and data publishers, but the benefit of having widely accepted standards for data identification and attribution would go far toward making data citation practical and advantageous. PMID:27570508

Data Citation in Neuroimaging: Proposed Best Practices for Data Identification and Attribution.

PubMed

Honor, Leah B; Haselgrove, Christian; Frazier, Jean A; Kennedy, David N

2016-01-01

Data sharing and reuse, while widely accepted as good ideas, have been slow to catch on in any concrete and consistent way. One major hurdle within the scientific community has been the lack of widely accepted standards for citing that data, making it difficult to track usage and measure impact. Within the neuroimaging community, there is a need for a way to not only clearly identify and cite datasets, but also to derive new aggregate sets from multiple sources while clearly maintaining lines of attribution. This work presents a functional prototype of a system to integrate Digital Object Identifiers (DOI) and a standardized metadata schema into a XNAT-based repository workflow, allowing for identification of data at both the project and image level. These item and source level identifiers allow any newly defined combination of images, from any number of projects, to be tagged with a new group-level DOI that automatically inherits the individual attributes and provenance information of its constituent parts. This system enables the tracking of data reuse down to the level of individual images. The implementation of this type of data identification system would impact researchers and data creators, data hosting facilities, and data publishers, but the benefit of having widely accepted standards for data identification and attribution would go far toward making data citation practical and advantageous.

Gender Differences in Positive Social-Emotional Functioning

ERIC Educational Resources Information Center

Romer, Natalie; Ravitch, N. Kathryn; Tom, Karalyn; Merrell, Kenneth W.; Wesley, Katherine L.

2011-01-01

We investigated gender differences of children and adolescents on positive social and emotional competencies using a new strength-based measure of positive social-emotional attributes and resilience--the Social-Emotional Assets and Resilience Scales (SEARS) cross-informant system. Caregivers, teachers, and students in grades kindergarten through…

Magnetic Field Response Measurement Acquisition System

NASA Technical Reports Server (NTRS)

Woodard, Stanley E.; Taylor, Bryant D.; Shams, Qamar A.; Fox, Robert L.

2005-01-01

A measurement acquisition method that alleviates many shortcomings of traditional measurement systems is presented in this paper. The shortcomings are a finite number of measurement channels, weight penalty associated with measurements, electrical arcing, wire degradations due to wear or chemical decay and the logistics needed to add new sensors. The key to this method is the use of sensors designed as passive inductor-capacitor circuits that produce magnetic field responses. The response attributes correspond to states of physical properties for which the sensors measure. A radio frequency antenna produces a time-varying magnetic field used to power the sensor and receive the magnetic field response of the sensor. An interrogation system for discerning changes in the sensor response is presented herein. Multiple sensors can be interrogated using this method. The method eliminates the need for a data acquisition channel dedicated to each sensor. Methods of developing magnetic field response sensors and the influence of key parameters on measurement acquisition are discussed.

Recent advances in laser triangulation-based measurement of airfoil surfaces

NASA Astrophysics Data System (ADS)

Hageniers, Omer L.

1995-01-01

The measurement of aircraft jet engine turbine and compressor blades requires a high degree of accuracy. This paper will address the development and performance attributes of a noncontact electro-optical gaging system specifically designed to meet the airfoil dimensional measurement requirements inherent in turbine and compressor blade manufacture and repair. The system described consists of the following key components: a high accuracy, dual channel, laser based optical sensor, a four degree of freedom mechanical manipulator system and a computer based operator interface. Measurement modes of the system include point by point data gathering at rates up to 3 points per second and an 'on-the-fly' mode where points can be gathered at data rates up to 20 points per second at surface scanning speeds of up to 1 inch per second. Overall system accuracy is +/- 0.0005 inches in a configuration that is useable in the blade manufacturing area. The systems ability to input design data from CAD data bases and output measurement data in a CAD compatible data format is discussed.

High Density Planar High Temperature Superconducting Josephson Junctions Arrays

DTIC Science & Technology

2006-09-01

focusing effects in magnetic field measurements and are more comparable with classical sandwich type Josephson junctions. Low temper- ature (100TC...The result is shown in Figure 4.1(b). The noise temperature calculated from the fit was 71.9 K, which is close to the measurement temperature of 63 K...The additional noise temperature is attributed to the measurement system. Both of the fits produce similar IcR,, 35 WV, and 31 MV for the RSJ and

Estimation of a Preference-Based Summary Score for the Patient-Reported Outcomes Measurement Information System: The PROMIS®-Preference (PROPr) Scoring System.

PubMed

Dewitt, Barry; Feeny, David; Fischhoff, Baruch; Cella, David; Hays, Ron D; Hess, Rachel; Pilkonis, Paul A; Revicki, Dennis A; Roberts, Mark S; Tsevat, Joel; Yu, Lan; Hanmer, Janel

2018-06-01

Health-related quality of life (HRQL) preference-based scores are used to assess the health of populations and patients and for cost-effectiveness analyses. The National Institutes of Health Patient-Reported Outcomes Measurement Information System (PROMIS ® ) consists of patient-reported outcome measures developed using item response theory. PROMIS is in need of a direct preference-based scoring system for assigning values to health states. To produce societal preference-based scores for 7 PROMIS domains: Cognitive Function-Abilities, Depression, Fatigue, Pain Interference, Physical Function, Sleep Disturbance, and Ability to Participate in Social Roles and Activities. Online survey of a US nationally representative sample ( n = 983). Preferences for PROMIS health states were elicited with the standard gamble to obtain both single-attribute scoring functions for each of the 7 PROMIS domains and a multiplicative multiattribute utility (scoring) function. The 7 single-attribute scoring functions were fit using isotonic regression with linear interpolation. The multiplicative multiattribute summary function estimates utilities for PROMIS multiattribute health states on a scale where 0 is the utility of being dead and 1 the utility of "full health." The lowest possible score is -0.022 (for a state viewed as worse than dead), and the highest possible score is 1. The online survey systematically excludes some subgroups, such as the visually impaired and illiterate. A generic societal preference-based scoring system is now available for all studies using these 7 PROMIS health domains.

Are university rankings useful to improve research? A systematic review.

PubMed

Vernon, Marlo M; Balas, E Andrew; Momani, Shaher

2018-01-01

Concerns about reproducibility and impact of research urge improvement initiatives. Current university ranking systems evaluate and compare universities on measures of academic and research performance. Although often useful for marketing purposes, the value of ranking systems when examining quality and outcomes is unclear. The purpose of this study was to evaluate usefulness of ranking systems and identify opportunities to support research quality and performance improvement. A systematic review of university ranking systems was conducted to investigate research performance and academic quality measures. Eligibility requirements included: inclusion of at least 100 doctoral granting institutions, be currently produced on an ongoing basis and include both global and US universities, publish rank calculation methodology in English and independently calculate ranks. Ranking systems must also include some measures of research outcomes. Indicators were abstracted and contrasted with basic quality improvement requirements. Exploration of aggregation methods, validity of research and academic quality indicators, and suitability for quality improvement within ranking systems were also conducted. A total of 24 ranking systems were identified and 13 eligible ranking systems were evaluated. Six of the 13 rankings are 100% focused on research performance. For those reporting weighting, 76% of the total ranks are attributed to research indicators, with 24% attributed to academic or teaching quality. Seven systems rely on reputation surveys and/or faculty and alumni awards. Rankings influence academic choice yet research performance measures are the most weighted indicators. There are no generally accepted academic quality indicators in ranking systems. No single ranking system provides a comprehensive evaluation of research and academic quality. Utilizing a combined approach of the Leiden, Thomson Reuters Most Innovative Universities, and the SCImago ranking systems may provide institutions with a more effective feedback for research improvement. Rankings which extensively rely on subjective reputation and "luxury" indicators, such as award winning faculty or alumni who are high ranking executives, are not well suited for academic or research performance improvement initiatives. Future efforts should better explore measurement of the university research performance through comprehensive and standardized indicators. This paper could serve as a general literature citation when one or more of university ranking systems are used in efforts to improve academic prominence and research performance.

It was meant to happen: explaining cultural variations in fate attributions.

PubMed

Norenzayan, Ara; Lee, Albert

2010-05-01

People often perceive important and improbable life outcomes as "meant to happen," that is, predetermined and inevitable. In 4 studies, we constructed diverse measures of such fate attributions and examined the cultural correlates of this attributional tendency, focusing on ethnic culture and religious affiliation differences. Independently of ethnic culture, Christians were found to endorse fate attributions more than did the nonreligious; and independently of religious affiliation, East Asian Canadians attributed events to fate more than did European Canadians. Consistent with theoretical predictions, the religious affiliation difference was mediated by belief in God, whereas the ethnic cultural difference was mediated by a measure of causal complexity, although not by a measure of acculturation. Experimentally inducing thoughts of causal complexity in one domain increased fate attributions in unrelated domains. These results point to 2 independent psychological sources of fate attributions which also explain observed cultural differences in this tendency. 2010 APA, all rights reserved

Human Transportation System (HTS) study: Executive summary

NASA Technical Reports Server (NTRS)

Lance, N.; Geyer, M. S.; Gaunce, M. T.

1993-01-01

Work completed under the Human Transportation System Study is summarized. This study was conducted by the New Initiatives Office at JSC with the technical support of Boeing, General Dynamics, Lockheed, McDonnell-Douglas, Martin Marietta, and Rockwell. The study was designed to generate information on determining the appropriate path to follow for new system development to meet the Nation's space transportation needs. The study evaluates 18 transportation architecture options using a parametric set of mission requirements. These options include use of current systems as well as proposed systems to assess the impact of various considerations, such as the cost of alternate access, or the benefit of separating people and cargo. The architecture options are compared to each other with six measurable evaluation criteria or attributes. They are the following: funding profile, human safety, probability of mission success, architecture cost risk, launch schedule confidence, and environmental impact. Values for these attributes are presented for the architecture options, with pertinent conclusions and recommendations.

Human Transportation System (HTS) study, volume 2

NASA Technical Reports Server (NTRS)

Lance, N.; Geyer, M. S.; Gaunce, M. T.

1993-01-01

This report summarizes work completed under the Human Transportation System Study. This study was conducted by the New Initiatives Office at JSC with the technical support of Boeing, General Dynamics, Lockheed, McDonnell-Douglas, Martin Marietta, and Rockwell. The study was designed to generate information on determining the appropriate path to follow for new system development to meet the Nation's space transportation needs. The study evaluates 18 transportation architecture options using a parametric set of mission requirements. These options include use of current systems (e.g., Shuttle, Titan, etc. ) as well as proposed systems (e.g., PLS, Single-Stage-to-Orbit, etc.) to assess the impact of various considerations, such as the cost of alternate access, or the benefit of separating people and cargo. The architecture options are compared to each other with six measurable evaluation criteria or attributes. They are: funding profile, human safety, probability of mission success, architecture cost risk, launch schedule confidence, and environmental impact. Values for these attributes are presented for the architecture options, with pertinent conclusions and recommendations.

Human Transportation System (HTS) study, volume 1

NASA Technical Reports Server (NTRS)

Lance, N.; Geyer, M. S.; Gaunce, M. T.

1993-01-01

Work completed under the Human Transportation System Study is summarized. This study was conducted by the New Initiatives Office at JSC with the technical support of Boeing, General Dynamics, Lockheed, McDonnell-Douglas, Martin Marietta, and Rockwell. The study was designed to generate information on determining the appropriate path to follow for new system development to meet the Nation's space transportation needs. The study evaluates 18 transportation architecture options using a parametric set of mission requirements. These options include use of current systems as well as proposed systems to assess the impact of various considerations, such as the cost of alternate access, or the benefit of separating people and cargo. The architecture options are compared to each other with six measurable evaluation criteria or attributes. They are the following: funding profile, human safety, probability of mission success, architecture cost risk, launch schedule confidence, and environmental impact. Values for these attributes are presented for the architecture options, with pertinent conclusions and recommendations.

Entropy Based Feature Selection for Fuzzy Set-Valued Information Systems

NASA Astrophysics Data System (ADS)

Ahmed, Waseem; Sufyan Beg, M. M.; Ahmad, Tanvir

2018-06-01

In Set-valued Information Systems (SIS), several objects contain more than one value for some attributes. Tolerance relation used for handling SIS sometimes leads to loss of certain information. To surmount this problem, fuzzy rough model was introduced. However, in some cases, SIS may contain some real or continuous set-values. Therefore, the existing fuzzy rough model for handling Information system with fuzzy set-values needs some changes. In this paper, Fuzzy Set-valued Information System (FSIS) is proposed and fuzzy similarity relation for FSIS is defined. Yager's relative conditional entropy was studied to find the significance measure of a candidate attribute of FSIS. Later, using these significance values, three greedy forward algorithms are discussed for finding the reduct and relative reduct for the proposed FSIS. An experiment was conducted on a sample population of the real dataset and a comparison of classification accuracies of the proposed FSIS with the existing SIS and single-valued Fuzzy Information Systems was made, which demonstrated the effectiveness of proposed FSIS.

Using Teacher Ratings to Track the Growth and Development of Young Children Using the "Teaching Strategies GOLD"® Assessment System

ERIC Educational Resources Information Center

Lambert, Richard G.; Kim, Do-Hong; Burts, Diane C.

2014-01-01

An important consideration in determining the validity of an observational assessment measure for young children is the variability attributed to the child versus that ascribed to the assessor or to some other factor such as classroom context. The "Teaching Strategies GOLD"® assessment system was used to elicit teacher ratings of a…

Alfred binet and the concept of heterogeneous orders.

PubMed

Michell, Joel

2012-01-01

In a comment, hitherto unremarked upon, Alfred Binet, well known for constructing the first intelligence scale, claimed that his scale did not measure intelligence, but only enabled classification with respect to a hierarchy of intellectual qualities. Attempting to understand the reasoning behind this comment leads to an historical excursion, beginning with the ancient mathematician, Euclid and ending with the modern French philosopher, Henri Bergson. As Euclid explained (Heath, 1908), magnitudes constituting a given quantitative attribute are all of the same kind (i.e., homogeneous), but his criterion covered only extensive magnitudes. Duns Scotus (Cross, 1998) included intensive magnitudes by considering differences, which raised the possibility (later considered by Sutherland, 2004) of ordered attributes with heterogeneous differences between degrees ("heterogeneous orders"). Of necessity, such attributes are non-measurable. Subsequently, this became a basis for the "quantity objection" to psychological measurement, as developed first by Tannery (1875a,b) and then by Bergson (1889). It follows that for attributes investigated in science, there are three structural possibilities: (1) classificatory attributes (with heterogeneous differences between categories); (2) heterogeneous orders (with heterogeneous differences between degrees); and (3) quantitative attributes (with thoroughly homogeneous differences between magnitudes). Measurement is possible only with attributes of kind (3) and, as far as we know, psychological attributes are exclusively of kinds (1) or (2). However, contrary to the known facts, psychometricians, for their own special reasons insist that test scores provide measurements.

Alfred Binet and the Concept of Heterogeneous Orders†

PubMed Central

Michell, Joel

2012-01-01

In a comment, hitherto unremarked upon, Alfred Binet, well known for constructing the first intelligence scale, claimed that his scale did not measure intelligence, but only enabled classification with respect to a hierarchy of intellectual qualities. Attempting to understand the reasoning behind this comment leads to an historical excursion, beginning with the ancient mathematician, Euclid and ending with the modern French philosopher, Henri Bergson. As Euclid explained (Heath, 1908), magnitudes constituting a given quantitative attribute are all of the same kind (i.e., homogeneous), but his criterion covered only extensive magnitudes. Duns Scotus (Cross, 1998) included intensive magnitudes by considering differences, which raised the possibility (later considered by Sutherland, 2004) of ordered attributes with heterogeneous differences between degrees (“heterogeneous orders”). Of necessity, such attributes are non-measurable. Subsequently, this became a basis for the “quantity objection” to psychological measurement, as developed first by Tannery (1875a,b) and then by Bergson (1889). It follows that for attributes investigated in science, there are three structural possibilities: (1) classificatory attributes (with heterogeneous differences between categories); (2) heterogeneous orders (with heterogeneous differences between degrees); and (3) quantitative attributes (with thoroughly homogeneous differences between magnitudes). Measurement is possible only with attributes of kind (3) and, as far as we know, psychological attributes are exclusively of kinds (1) or (2). However, contrary to the known facts, psychometricians, for their own special reasons insist that test scores provide measurements. PMID:22912619

Understanding software faults and their role in software reliability modeling

NASA Technical Reports Server (NTRS)

Munson, John C.

1994-01-01

This study is a direct result of an on-going project to model the reliability of a large real-time control avionics system. In previous modeling efforts with this system, hardware reliability models were applied in modeling the reliability behavior of this system. In an attempt to enhance the performance of the adapted reliability models, certain software attributes were introduced in these models to control for differences between programs and also sequential executions of the same program. As the basic nature of the software attributes that affect software reliability become better understood in the modeling process, this information begins to have important implications on the software development process. A significant problem arises when raw attribute measures are to be used in statistical models as predictors, for example, of measures of software quality. This is because many of the metrics are highly correlated. Consider the two attributes: lines of code, LOC, and number of program statements, Stmts. In this case, it is quite obvious that a program with a high value of LOC probably will also have a relatively high value of Stmts. In the case of low level languages, such as assembly language programs, there might be a one-to-one relationship between the statement count and the lines of code. When there is a complete absence of linear relationship among the metrics, they are said to be orthogonal or uncorrelated. Usually the lack of orthogonality is not serious enough to affect a statistical analysis. However, for the purposes of some statistical analysis such as multiple regression, the software metrics are so strongly interrelated that the regression results may be ambiguous and possibly even misleading. Typically, it is difficult to estimate the unique effects of individual software metrics in the regression equation. The estimated values of the coefficients are very sensitive to slight changes in the data and to the addition or deletion of variables in the regression equation. Since most of the existing metrics have common elements and are linear combinations of these common elements, it seems reasonable to investigate the structure of the underlying common factors or components that make up the raw metrics. The technique we have chosen to use to explore this structure is a procedure called principal components analysis. Principal components analysis is a decomposition technique that may be used to detect and analyze collinearity in software metrics. When confronted with a large number of metrics measuring a single construct, it may be desirable to represent the set by some smaller number of variables that convey all, or most, of the information in the original set. Principal components are linear transformations of a set of random variables that summarize the information contained in the variables. The transformations are chosen so that the first component accounts for the maximal amount of variation of the measures of any possible linear transform; the second component accounts for the maximal amount of residual variation; and so on. The principal components are constructed so that they represent transformed scores on dimensions that are orthogonal. Through the use of principal components analysis, it is possible to have a set of highly related software attributes mapped into a small number of uncorrelated attribute domains. This definitively solves the problem of multi-collinearity in subsequent regression analysis. There are many software metrics in the literature, but principal component analysis reveals that there are few distinct sources of variation, i.e. dimensions, in this set of metrics. It would appear perfectly reasonable to characterize the measurable attributes of a program with a simple function of a small number of orthogonal metrics each of which represents a distinct software attribute domain.

Relationship of School-Based Attributions to Depression

ERIC Educational Resources Information Center

Bell, Sherry Mee; McCallum, R. Steve; Doucette, Janette A.

2004-01-01

Relationships among attributions for success and failure and depression were investigated for 63 5th-grade students. Significant relationships were found among school-based attributions, as measured by global scale scores from the Student Academic Attribution Scale (SAAS) and the Student Social Attribution Scale (SSAS), general attributions as…

[The cost of tobacco-related diseases for Brazil's Unified National Health System].

PubMed

Pinto, Márcia; Ugá, Maria Alicia Domínguez

2010-06-01

This study aimed to identify the direct costs of hospitalizations due to three smoking-related groups of diseases - cancer and circulatory and respiratory diseases - in Brazil's Unified National Health System (SUS) in 2005. For cancer, the cost of chemotherapy was also included. The study derived cost estimates using administrative databases, relative risks, smoking prevalence, and smoking-attributable fraction. According to the estimates, smoking- attributable medical expenditures for the three disease groups amounted to R$338,692,516.02 (approximately U$185 million), accounting for 27.6% of total medical expenditures. Considering all hospitalizations and chemotherapy provided by the National Health System, tobacco-related diseases accounted for 7.7% of total medical expenditures. These costs also represented 0.9% of expenditures by federally funded public health services. This study provides a conservative estimate of smoking-related costs and suggests the need for continued research on comprehensive approaches to measure the total burden of smoking for society.

Measurement of single soybean seed attributes by near infrared technologies. A comparative study

USDA-ARS?s Scientific Manuscript database

Four near infrared spectrophotometers, and their associated spectral collection methods, were tested and compared for measuring three soybean single seed attributes: weight (g), protein (%), and oil (%). Using partial least squares (PLS) and 4 preprocessing methods, the attribute which was significa...

Investigations on the defect dipole induced pyroelectric current in multiferroic GdMnO3 system

NASA Astrophysics Data System (ADS)

Pal, A.; Dhana Sekhar, C.; Venimadhav, A.; Prellier, W.; Murugavel, P.

2018-01-01

Pyroelectric current measurements on the orthorhombic GdMnO3 polycrystalline sample are done to explore the intrinsic and extrinsic contributions. The measurements reveal poling temperature dependent pyrocurrent peaks at 20, 50 and 108 K. The pyrocurrent at 20 K and at 108 K are attributed to ferroelectric transition induced by the incommensurate spiral magnetic ordering of Mn spins and the release of trapped charges from the localized states, respectively. A detailed analysis on the broad pyrocurrent signal at 50 K suggests that it could be attributed to the thermally stimulated depolarization current effect due to the relaxation of defect dipoles induced by negatively charged Mn3+ ions and excess holes localized at Mn4+ sites. Importantly, the effect of the electric field due to the defect dipoles on the ferroelectric state is highlighted. The temperature dependent dielectric measurements under the magnetic field brought out the correlation between pyroelectric and dielectric properties. The influence of poling temperature dependent extrinsic effects on pyrocurrent suggests the choice of poling temperature on the study of polarization and the resultant multiferroicity in a spin-driven ferroelectric rare earth manganite system.

77 FR 25707 - Submission for OMB Review; Comment request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

... and OMB Number: Electronic Health Record (EHR) Usability Survey; OMB Control Number 0720-TBD. Type of... information collection is to develop a longitudinal measure of how end-users perceive the usability of the... the focus has shifted towards understanding the usability of a system. This usability attribute...

Visualizing and quantifying microtopographic change of dryland landscapes from an unmanned aircraft system

USDA-ARS?s Scientific Manuscript database

Background/Question/Methods: Soil and site stability are key attributes of assessing the health of dryland landscapes because these lands are susceptible to high rates of wind- and water-caused erosion. Field techniques for measuring and monitoring soil erosion in drylands are often labor intensive...

76 FR 29765 - Determination of System Attributes for the Tracking and Tracing of Prescription Drugs; Reopening...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-23

... a track-and-trace system and for obtaining input from supply chain partners on potential attributes...-trace system and (2) input from supply chain partners on potential attributes and standards for the...

A review of data quality assessment methods for public health information systems.

PubMed

Chen, Hong; Hailey, David; Wang, Ning; Yu, Ping

2014-05-14

High quality data and effective data quality assessment are required for accurately evaluating the impact of public health interventions and measuring public health outcomes. Data, data use, and data collection process, as the three dimensions of data quality, all need to be assessed for overall data quality assessment. We reviewed current data quality assessment methods. The relevant study was identified in major databases and well-known institutional websites. We found the dimension of data was most frequently assessed. Completeness, accuracy, and timeliness were the three most-used attributes among a total of 49 attributes of data quality. The major quantitative assessment methods were descriptive surveys and data audits, whereas the common qualitative assessment methods were interview and documentation review. The limitations of the reviewed studies included inattentiveness to data use and data collection process, inconsistency in the definition of attributes of data quality, failure to address data users' concerns and a lack of systematic procedures in data quality assessment. This review study is limited by the coverage of the databases and the breadth of public health information systems. Further research could develop consistent data quality definitions and attributes. More research efforts should be given to assess the quality of data use and the quality of data collection process.

A Review of Data Quality Assessment Methods for Public Health Information Systems

PubMed Central

Chen, Hong; Hailey, David; Wang, Ning; Yu, Ping

2014-01-01

High quality data and effective data quality assessment are required for accurately evaluating the impact of public health interventions and measuring public health outcomes. Data, data use, and data collection process, as the three dimensions of data quality, all need to be assessed for overall data quality assessment. We reviewed current data quality assessment methods. The relevant study was identified in major databases and well-known institutional websites. We found the dimension of data was most frequently assessed. Completeness, accuracy, and timeliness were the three most-used attributes among a total of 49 attributes of data quality. The major quantitative assessment methods were descriptive surveys and data audits, whereas the common qualitative assessment methods were interview and documentation review. The limitations of the reviewed studies included inattentiveness to data use and data collection process, inconsistency in the definition of attributes of data quality, failure to address data users’ concerns and a lack of systematic procedures in data quality assessment. This review study is limited by the coverage of the databases and the breadth of public health information systems. Further research could develop consistent data quality definitions and attributes. More research efforts should be given to assess the quality of data use and the quality of data collection process. PMID:24830450

Singular value decomposition for photon-processing nuclear imaging systems and applications for reconstruction and computing null functions.

PubMed

Jha, Abhinav K; Barrett, Harrison H; Frey, Eric C; Clarkson, Eric; Caucci, Luca; Kupinski, Matthew A

2015-09-21

Recent advances in technology are enabling a new class of nuclear imaging systems consisting of detectors that use real-time maximum-likelihood (ML) methods to estimate the interaction position, deposited energy, and other attributes of each photon-interaction event and store these attributes in a list format. This class of systems, which we refer to as photon-processing (PP) nuclear imaging systems, can be described by a fundamentally different mathematical imaging operator that allows processing of the continuous-valued photon attributes on a per-photon basis. Unlike conventional photon-counting (PC) systems that bin the data into images, PP systems do not have any binning-related information loss. Mathematically, while PC systems have an infinite-dimensional null space due to dimensionality considerations, PP systems do not necessarily suffer from this issue. Therefore, PP systems have the potential to provide improved performance in comparison to PC systems. To study these advantages, we propose a framework to perform the singular-value decomposition (SVD) of the PP imaging operator. We use this framework to perform the SVD of operators that describe a general two-dimensional (2D) planar linear shift-invariant (LSIV) PP system and a hypothetical continuously rotating 2D single-photon emission computed tomography (SPECT) PP system. We then discuss two applications of the SVD framework. The first application is to decompose the object being imaged by the PP imaging system into measurement and null components. We compare these components to the measurement and null components obtained with PC systems. In the process, we also present a procedure to compute the null functions for a PC system. The second application is designing analytical reconstruction algorithms for PP systems. The proposed analytical approach exploits the fact that PP systems acquire data in a continuous domain to estimate a continuous object function. The approach is parallelizable and implemented for graphics processing units (GPUs). Further, this approach leverages another important advantage of PP systems, namely the possibility to perform photon-by-photon real-time reconstruction. We demonstrate the application of the approach to perform reconstruction in a simulated 2D SPECT system. The results help to validate and demonstrate the utility of the proposed method and show that PP systems can help overcome the aliasing artifacts that are otherwise intrinsically present in PC systems.

Singular value decomposition for photon-processing nuclear imaging systems and applications for reconstruction and computing null functions

NASA Astrophysics Data System (ADS)

Jha, Abhinav K.; Barrett, Harrison H.; Frey, Eric C.; Clarkson, Eric; Caucci, Luca; Kupinski, Matthew A.

2015-09-01

Recent advances in technology are enabling a new class of nuclear imaging systems consisting of detectors that use real-time maximum-likelihood (ML) methods to estimate the interaction position, deposited energy, and other attributes of each photon-interaction event and store these attributes in a list format. This class of systems, which we refer to as photon-processing (PP) nuclear imaging systems, can be described by a fundamentally different mathematical imaging operator that allows processing of the continuous-valued photon attributes on a per-photon basis. Unlike conventional photon-counting (PC) systems that bin the data into images, PP systems do not have any binning-related information loss. Mathematically, while PC systems have an infinite-dimensional null space due to dimensionality considerations, PP systems do not necessarily suffer from this issue. Therefore, PP systems have the potential to provide improved performance in comparison to PC systems. To study these advantages, we propose a framework to perform the singular-value decomposition (SVD) of the PP imaging operator. We use this framework to perform the SVD of operators that describe a general two-dimensional (2D) planar linear shift-invariant (LSIV) PP system and a hypothetical continuously rotating 2D single-photon emission computed tomography (SPECT) PP system. We then discuss two applications of the SVD framework. The first application is to decompose the object being imaged by the PP imaging system into measurement and null components. We compare these components to the measurement and null components obtained with PC systems. In the process, we also present a procedure to compute the null functions for a PC system. The second application is designing analytical reconstruction algorithms for PP systems. The proposed analytical approach exploits the fact that PP systems acquire data in a continuous domain to estimate a continuous object function. The approach is parallelizable and implemented for graphics processing units (GPUs). Further, this approach leverages another important advantage of PP systems, namely the possibility to perform photon-by-photon real-time reconstruction. We demonstrate the application of the approach to perform reconstruction in a simulated 2D SPECT system. The results help to validate and demonstrate the utility of the proposed method and show that PP systems can help overcome the aliasing artifacts that are otherwise intrinsically present in PC systems.

Systematic measurement of fast neutron background fluctuations in an urban area using a mobile detection system

NASA Astrophysics Data System (ADS)

Iyengar, A.; Beach, M.; Newby, R. J.; Fabris, L.; Heilbronn, L. H.; Hayward, J. P.

2015-02-01

Neutron background measurements using a mobile trailer-based system were conducted in Knoxville, Tennessee, USA. The 0.5 m2 system, consisting of eight EJ-301 liquid scintillation detectors, was used to collect neutron background measurements in order to better understand the systematic variations in background that depend solely on the street-level measurement position in a downtown area. Data was collected along 5 different streets, and the measurements were found to be repeatable. Using 10-min measurements, the fractional uncertainty in each measured data point was <2%. Compared with fast neutron background count rates measured away from downtown Knoxville, a reduction in background count rates ranging from 10% to 50% was observed in the downtown area, sometimes varying substantially over distances of tens of meters. These reductions are attributed to the net shielding of the cosmic ray neutron flux by adjacent buildings. For reference, the building structure as observed at street level is quantified in part here by a measured angle-of-open-sky metric.

Group Administration of the Children's Attributional Style Interview

ERIC Educational Resources Information Center

Rueger, Sandra Yu; Malecki, Christine Kerres

2007-01-01

Research testing the reformulated theory of learned helplessness has been limited by the psychometric properties of instruments used to measure children's attributional style. Thus, the goal of this investigation was to modify a relatively new measure of attributional style that has demonstrated strong psychometric properties with young children…

Systematic measurement of fast neutron background fluctuations in an urban area using a mobile detection system

DOE PAGES

Iyengar, Anagha; Beach, Matthew; Newby, Robert J.; ...

2015-11-12

Neutron background measurements using a mobile trailer-based system were conducted in Knoxville, Tennessee. The 0.5 m 2 system consisting of 8 EJ-301 liquid scintillation detectors was used to collect neutron background measurements in order to better understand the systematic background variations that depend solely on the street-level measurement position in a local, downtown area. Data was collected along 5 different streets in the downtown Knoxville area, and the measurements were found to be repeatable. Using 10-min measurements, fractional uncertainty in each measured data point was <2%. Compared with fast neutron background count rates measured away from downtown Knoxville, a reductionmore » in background count rates ranging from 10-50% was observed in the downtown area, sometimes varying substantially over distances of tens of meters. These reductions are attributed to the shielding of adjacent buildings, quantified in part here by the metric angle-of-open-sky. The adjacent buildings may serve to shield cosmic ray neutron flux.« less

Using Image Attributes to Assure Accurate Particle Size and Count Using Nanoparticle Tracking Analysis.

PubMed

Defante, Adrian P; Vreeland, Wyatt N; Benkstein, Kurt D; Ripple, Dean C

2018-05-01

Nanoparticle tracking analysis (NTA) obtains particle size by analysis of particle diffusion through a time series of micrographs and particle count by a count of imaged particles. The number of observed particles imaged is controlled by the scattering cross-section of the particles and by camera settings such as sensitivity and shutter speed. Appropriate camera settings are defined as those that image, track, and analyze a sufficient number of particles for statistical repeatability. Here, we test if image attributes, features captured within the image itself, can provide measurable guidelines to assess the accuracy for particle size and count measurements using NTA. The results show that particle sizing is a robust process independent of image attributes for model systems. However, particle count is sensitive to camera settings. Using open-source software analysis, it was found that a median pixel area, 4 pixels 2 , results in a particle concentration within 20% of the expected value. The distribution of these illuminated pixel areas can also provide clues about the polydispersity of particle solutions prior to using a particle tracking analysis. Using the median pixel area serves as an operator-independent means to assess the quality of the NTA measurement for count. Published by Elsevier Inc.

An interval-valued 2-tuple linguistic group decision-making model based on the Choquet integral operator

NASA Astrophysics Data System (ADS)

Liu, Bingsheng; Fu, Meiqing; Zhang, Shuibo; Xue, Bin; Zhou, Qi; Zhang, Shiruo

2018-01-01

The Choquet integral (IL) operator is an effective approach for handling interdependence among decision attributes in complex decision-making problems. However, the fuzzy measures of attributes and attribute sets required by IL are difficult to achieve directly, which limits the application of IL. This paper proposes a new method for determining fuzzy measures of attributes by extending Marichal's concept of entropy for fuzzy measure. To well represent the assessment information, interval-valued 2-tuple linguistic context is utilised to represent information. Then, we propose a Choquet integral operator in an interval-valued 2-tuple linguistic environment, which can effectively handle the correlation between attributes. In addition, we apply these methods to solve multi-attribute group decision-making problems. The feasibility and validity of the proposed operator is demonstrated by comparisons with other models in illustrative example part.

ARC-VM: An architecture real options complexity-based valuation methodology for military systems-of-systems acquisitions

NASA Astrophysics Data System (ADS)

Domercant, Jean Charles

The combination of today's national security environment and mandated acquisition policies makes it necessary for military systems to interoperate with each other to greater degrees. This growing interdependency results in complex Systems-of-Systems (SoS) that only continue to grow in complexity to meet evolving capability needs. Thus, timely and affordable acquisition becomes more difficult, especially in the face of mounting budgetary pressures. To counter this, architecting principles must be applied to SoS design. The research objective is to develop an Architecture Real Options Complexity-Based Valuation Methodology (ARC-VM) suitable for acquisition-level decision making, where there is a stated desire for more informed tradeoffs between cost, schedule, and performance during the early phases of design. First, a framework is introduced to measure architecture complexity as it directly relates to military SoS. Development of the framework draws upon a diverse set of disciplines, including Complexity Science, software architecting, measurement theory, and utility theory. Next, a Real Options based valuation strategy is developed using techniques established for financial stock options that have recently been adapted for use in business and engineering decisions. The derived complexity measure provides architects with an objective measure of complexity that focuses on relevant complex system attributes. These attributes are related to the organization and distribution of SoS functionality and the sharing and processing of resources. The use of Real Options provides the necessary conceptual and visual framework to quantifiably and traceably combine measured architecture complexity, time-valued performance levels, as well as programmatic risks and uncertainties. An example suppression of enemy air defenses (SEAD) capability demonstrates the development and usefulness of the resulting architecture complexity & Real Options based valuation methodology. Different portfolios of candidate system types are used to generate an array of architecture alternatives that are then evaluated using an engagement model. This performance data is combined with both measured architecture complexity and programmatic data to assign an acquisition value to each alternative. This proves useful when selecting alternatives most likely to meet current and future capability needs.

Implicit Measures: A Normative Analysis and Review

ERIC Educational Resources Information Center

De Houwer, Jan; Teige-Mocigemba, Sarah; Spruyt, Adriaan; Moors, Agnes

2009-01-01

Implicit measures can be defined as outcomes of measurement procedures that are caused in an automatic manner by psychological attributes. To establish that a measurement outcome is an implicit measure, one should examine (a) whether the outcome is causally produced by the psychological attribute it was designed to measure, (b) the nature of the…

Acute Gastrointestinal Illness Risks in North Carolina Community Water Systems: A Methodological Comparison.

PubMed

DeFelice, Nicholas B; Johnston, Jill E; Gibson, Jacqueline MacDonald

2015-08-18

The magnitude and spatial variability of acute gastrointestinal illness (AGI) cases attributable to microbial contamination of U.S. community drinking water systems are not well characterized. We compared three approaches (drinking water attributable risk, quantitative microbial risk assessment, and population intervention model) to estimate the annual number of emergency department visits for AGI attributable to microorganisms in North Carolina community water systems. All three methods used 2007-2013 water monitoring and emergency department data obtained from state agencies. The drinking water attributable risk method, which was the basis for previous U.S. Environmental Protection Agency national risk assessments, estimated that 7.9% of annual emergency department visits for AGI are attributable to microbial contamination of community water systems. However, the other methods' estimates were more than 2 orders of magnitude lower, each attributing 0.047% of annual emergency department visits for AGI to community water system contamination. The differences in results between the drinking water attributable risk method, which has been the main basis for previous national risk estimates, and the other two approaches highlight the need to improve methods for estimating endemic waterborne disease risks, in order to prioritize investments to improve community drinking water systems.

Modeling Psychological Attributes in Psychology – An Epistemological Discussion: Network Analysis vs. Latent Variables

PubMed Central

Guyon, Hervé; Falissard, Bruno; Kop, Jean-Luc

2017-01-01

Network Analysis is considered as a new method that challenges Latent Variable models in inferring psychological attributes. With Network Analysis, psychological attributes are derived from a complex system of components without the need to call on any latent variables. But the ontological status of psychological attributes is not adequately defined with Network Analysis, because a psychological attribute is both a complex system and a property emerging from this complex system. The aim of this article is to reappraise the legitimacy of latent variable models by engaging in an ontological and epistemological discussion on psychological attributes. Psychological attributes relate to the mental equilibrium of individuals embedded in their social interactions, as robust attractors within complex dynamic processes with emergent properties, distinct from physical entities located in precise areas of the brain. Latent variables thus possess legitimacy, because the emergent properties can be conceptualized and analyzed on the sole basis of their manifestations, without exploring the upstream complex system. However, in opposition with the usual Latent Variable models, this article is in favor of the integration of a dynamic system of manifestations. Latent Variables models and Network Analysis thus appear as complementary approaches. New approaches combining Latent Network Models and Network Residuals are certainly a promising new way to infer psychological attributes, placing psychological attributes in an inter-subjective dynamic approach. Pragmatism-realism appears as the epistemological framework required if we are to use latent variables as representations of psychological attributes. PMID:28572780

Attribution of irreversible loss to anthropogenic climate change

NASA Astrophysics Data System (ADS)

Huggel, Christian; Bresch, David; Hansen, Gerrit; James, Rachel; Mechler, Reinhard; Stone, Dáithí; Wallimann-Helmer, Ivo

2016-04-01

The Paris Agreement (2015) under the UNFCCC has anchored loss and damage in a separate article which specifies that understanding and support should be enhanced in areas addressing loss and damage such as early warning, preparedness, insurance and resilience. Irreversible loss is a special category under loss and damage but there is still missing clarity over what irreversible loss actually includes. Many negative impacts of climate change may be handled or mitigated by existing risk management, reduction and absorption approaches. Irreversible loss, however, is thought to be insufficiently addressed by risk management. Therefore, countries potentially or actually affected by irreversible loss are calling for other measures such as compensation, which however is highly contested in international climate policy. In Paris (2015) a decision was adopted that loss and damage as defined in the respective article of the agreement does not involve compensation and liability. Nevertheless, it is likely that some sort of mechanism will eventually need to come into play for irreversible loss due to anthropogenic climate change, which might involve compensation, other forms of non-monetary reparation, or transformation. Furthermore, climate litigation has increasingly been attempted to address negative effects of climate change. In this context, attribution is important to understand the drivers of change, what counts as irreversible loss due to climate change, and, possibly, who or what is responsible. Here we approach this issue by applying a detection and attribution perspective on irreversible loss. We first analyze detected climate change impacts as assessed in the IPCC Fifth Assessment Report. We distinguish between irreversible loss in physical, biological and human systems, and accordingly identify the following candidates of irreversible loss in these systems: loss of glaciers and ice sheets, loss of subsurface ice (permafrost) and related loss of lake systems; loss of land area due to coastal and hillslope erosion and sea level change; loss of plant and animal species, loss of ecosystems and biodiversity; loss of human lives, homelands, and cultural identity. Attribution to anthropogenic climate change is analyzed based on recent progress following from the IPCC AR5. Generally, high confidence in attributing irreversible loss to anthropogenic climate change is found in physical systems and more specifically in cryosphere environments, both in mountain and polar regions. Detected loss in terrestrial ecosystems has typically low confidence in attribution whereas loss in some ocean ecosystems (corals) has high confidence. Impacts in human systems that may be classified as irreversible loss are of low confidence in terms of attribution except for the Arctic where higher confidence for a relation with anthropogenic emissions was found. Our analysis suggests that scientific progress in detection and attribution is now at a level that would likely allow policy, or courts, to define mechanisms, or take decisions, as related to irreversible loss in many cryosphere systems. On the other hand, policy may need to consider that at least in the near future it will be difficult to establish clear tracks between irreversible loss in most human systems and anthropogenic climate change, a domain, which however is at the forefront of discussions. We end our discussion with setting out ideas for further clarification of different categories of irreversible loss, including in human systems, and the role of attribution in any policy or legal mechanism in order to help in the development of just and sensible solutions.

A Cost-Effectiveness Analysis of Tactical Satellites, High-Altitude Long-Endurance Airships, and High and Medium Altitude Unmanned Aerial Systems for ISR and Communication Missions

DTIC Science & Technology

2008-09-01

greatest coverage. Coverage rates will vary depending on the type of orbit. Orbits are generally optimized for the spacecraft mission. Imaging ... DETERMINING MEASURES OF EFFECTIVENESS (MOE) ............. 46 1. MOE Attributes...101 A. DETERMINING COST ALTERNATIVES ......................................... 101 1. All

Effects of mass air flow rate through an open-circuit gas quantification system when measuring carbon emissions

USDA-ARS?s Scientific Manuscript database

Methane (CH4) and carbon dioxide (CO2) represent 11 and 81%, respectively, of all anthropogenic greenhouse gas emissions. Agricultural CH4 emissions account for approximately 43% of all anthropogenic CH4 emissions. Most agricultural CH4 emissions are attributed to enteric fermentation within rumin...

Organisational Change: Communicating to Schein's Operator, Engineer and Executive Occupational Subcultures

ERIC Educational Resources Information Center

Chapman, Geoffrey R.; Hayes, Kathryn J.; Sloan, Terry; Fitzgerald, Janna Anneke

2011-01-01

There has been substantial academic interest surrounding innovation, change management and the individual attributes that permit and promote learning, organisational change and innovative behaviour. This research uses a psychometric tool known as the Instinctive Drives System[R] to measure preferred working styles in 3943 employees from a range of…

Collectivity and manifestations of minimum-bias jets in high-energy nuclear collisions

NASA Astrophysics Data System (ADS)

Trainor, Thomas A.

2018-01-01

Collectivity, as interpreted to mean flow of a dense medium in high-energy A-A collisions described by hydrodynamics, has been attributed to smaller collision systems - p-A and even p-p collisions - based on recent analysis of LHC data. However, alternative methods reveal that some data features attributed to flows are actually manifestations of minimum-bias (MB) jets. In this presentation I review the differential structure of single-particle pt spectra from SPS to LHC energies in the context of a two-component (soft + hard) model (TCM) of hadron production. I relate the spectrum hard component to measured properties of isolated jets. I use the spectrum TCM to predict accurately the systematics of ensemble-mean p̅t in p-p, p-A and A-A collision systems over a large energy interval. Detailed comparisons of the TCM with spectrum and correlation data suggest that MB jets play a dominant role in hadron production near midrapidity. Claimed flow phenomena are better explained as jet manifestations agreeing quantitatively with measured jet properties.

Attribution of the French human Salmonellosis cases to the main food-sources according to the type of surveillance data.

PubMed

David, J M; Sanders, P; Bemrah, N; Granier, S A; Denis, M; Weill, F-X; Guillemot, D; Watier, L

2013-05-15

Salmonella are the most common bacterial cause of foodborne infections in France and ubiquitous pathogens present in many animal productions. Assessing the relative contribution of the different food-animal sources to the burden of human cases is a key step towards the conception, prioritization and assessment of efficient control policy measures. For this purpose, we considered a Bayesian microbial subtyping attribution approach based on a previous published model (Hald et al., 2004). It requires quality integrated data on human cases and on the contamination of their food sources, per serotype and microbial subtype, which were retrieved from the French integrated surveillance system for Salmonella. The quality of the data available for such an approach is an issue for many countries in which the surveillance system has not been designed for this purpose. In France, the sources are monitored simultaneously by an active, regulation-based surveillance system that produces representative prevalence data (as ideally required for the approach) and a passive system relying on voluntary laboratories that produces data not meeting the standards set by Hald et al. (2004) but covering a broader range of sources. These data allowed us to study the impact of data quality on the attribution results, globally and focusing on specific features of the data (number of sources and contamination indicator). The microbial subtyping attribution model was run using an adapted parameterization previously proposed (David et al., 2012). A total of 9076 domestic sporadic cases were included in the analyses as well as 9 sources among which 5 were common to the active and the passive datasets. The greatest impact on the attribution results was observed for the number of sources. Thus, especially in the absence of data on imported products, the attribution estimates presented here should be considered with caution. The results were comparable for both types of surveillance, leading to the conclusion that passive data constitute a potential cost-effective complement to active data collection, especially interesting because the former encompass a greater number of sources. The model appeared robust to the type of surveillance, and provided that some methodological aspects of the model can be enhanced, it could also serve as a risk-based guidance tool for active surveillance systems. Copyright © 2013 Elsevier B.V. All rights reserved.

Parental Health Attributions of Childhood Health and Illness: Development of the Pediatric Cultural Health Attributions Questionnaire (Pedi-CHAQ).

PubMed

Vaughn, Lisa M; McLinden, Daniel J; Shellmer, Diana; Baker, Raymond C

2011-01-01

The causes attributed to childhood health and illness across cultures (cultural health attributions) are key factors that are now more frequently identified as affecting the health outcomes of children. Research suggests that the causes attributed to an event such as illness are thought to affect subsequent motivation, emotional response, decision making, and behavior. To date, there is no measure of health attributions appropriate for use with parents of pediatric patients. Using the Many-Facets approach to Rasch analysis, this study assesses the psychometrics of a newly developed instrument, the Pediatric Health Attributions Questionnaire (Pedi-CHAQ), a measure designed to assess the cultural health attributions of parents in diverse communities. Results suggest acceptable Rasch model statistics of fit and reliability for the Pedi-CHAQ. A shortened version of the questionnaire was developed as a result of this study and next steps are discussed.

Alcohol consumption and burden of disease in the Americas in 2012: implications for alcohol policy.

PubMed

Shield, Kevin D; Monteiro, Maristela; Roerecke, Michael; Smith, Blake; Rehm, Jürgen

2015-12-01

To describe the volume and patterns of alcohol consumption up to and including 2012, and to estimate the burden of disease attributable to alcohol consumption as measured in deaths and disability-adjusted life years (DALYs) lost in the Americas in 2012. Measures of alcohol consumption were obtained from the World Health Organization (WHO) Global Information System on Alcohol and Health (GISAH). The burden of alcohol consumption was estimated in both deaths and DALYs lost based on mortality data obtained from WHO, using alcohol-attributable fractions. Regional groupings for the Americas were based on the WHO classifications for 2004 (according to child and adult mortality). Regional variations were observed in the overall volume of alcohol consumed, the proportion of the alcohol market attributable to unrecorded alcohol consumption, drinking patterns, prevalence of drinking, and prevalence of heavy episodic drinking, with inhabitants of the Americas consuming more alcohol (8.4 L of pure alcohol per adult in 2012) compared to the world average. The Americas also experienced a high burden of disease attributable to alcohol consumption (4.7% of all deaths and 6.7% of all DALYs lost), especially in terms of injuries attributable to alcohol consumption. Alcohol is consumed in a harmful manner in the Americas, leading to a high burden of disease, especially in terms of injuries. New cost-effective alcohol policies, such as increasing alcohol taxation, increasing the minimum legal age to purchase alcohol, and decreasing the maximum legal blood alcohol content while driving, should be implemented to decrease the harmful consumption of alcohol and the resulting burden of disease.

Are university rankings useful to improve research? A systematic review

PubMed Central

Momani, Shaher

2018-01-01

Introduction Concerns about reproducibility and impact of research urge improvement initiatives. Current university ranking systems evaluate and compare universities on measures of academic and research performance. Although often useful for marketing purposes, the value of ranking systems when examining quality and outcomes is unclear. The purpose of this study was to evaluate usefulness of ranking systems and identify opportunities to support research quality and performance improvement. Methods A systematic review of university ranking systems was conducted to investigate research performance and academic quality measures. Eligibility requirements included: inclusion of at least 100 doctoral granting institutions, be currently produced on an ongoing basis and include both global and US universities, publish rank calculation methodology in English and independently calculate ranks. Ranking systems must also include some measures of research outcomes. Indicators were abstracted and contrasted with basic quality improvement requirements. Exploration of aggregation methods, validity of research and academic quality indicators, and suitability for quality improvement within ranking systems were also conducted. Results A total of 24 ranking systems were identified and 13 eligible ranking systems were evaluated. Six of the 13 rankings are 100% focused on research performance. For those reporting weighting, 76% of the total ranks are attributed to research indicators, with 24% attributed to academic or teaching quality. Seven systems rely on reputation surveys and/or faculty and alumni awards. Rankings influence academic choice yet research performance measures are the most weighted indicators. There are no generally accepted academic quality indicators in ranking systems. Discussion No single ranking system provides a comprehensive evaluation of research and academic quality. Utilizing a combined approach of the Leiden, Thomson Reuters Most Innovative Universities, and the SCImago ranking systems may provide institutions with a more effective feedback for research improvement. Rankings which extensively rely on subjective reputation and “luxury” indicators, such as award winning faculty or alumni who are high ranking executives, are not well suited for academic or research performance improvement initiatives. Future efforts should better explore measurement of the university research performance through comprehensive and standardized indicators. This paper could serve as a general literature citation when one or more of university ranking systems are used in efforts to improve academic prominence and research performance. PMID:29513762

Systems of attitudes towards production in the pork industry. A cross-national study.

PubMed

Sørensen, Bjarne Taulo; Barcellos, Marcia Dutra de; Olsen, Nina Veflen; Verbeke, Wim; Scholderer, Joachim

2012-12-01

Existing research on public attitudes towards agricultural production systems is largely descriptive, abstracting from the processes through which members of the general public generate their evaluations of such systems. The present paper adopts a systems perspective on such evaluations, understanding them as embedded into a wider attitude system that consists of attitudes towards objects of different abstraction levels, ranging from personal value orientations over general socio-political attitudes to evaluations of specific characteristics of agricultural production systems. It is assumed that evaluative affect propagates through the system in such a way that the system becomes evaluatively consistent and operates as a schema for the generation of evaluative judgments. In the empirical part of the paper, the causal structure of an attitude system from which people derive their evaluations of pork production systems was modelled. The analysis was based on data from a cross-national survey involving 1931 participants from Belgium, Denmark, Germany and Poland. The survey questionnaire contained measures of personal value orientations and attitudes towards environment and nature, industrial food production, food and the environment, technological progress, animal welfare, local employment and local economy. In addition, the survey included a conjoint task by which participants' evaluations of the importance of production system attributes were measured. The data were analysed by means of causal search algorithms and structural equation models. The results suggest that evaluative judgments of the importance of pork production system attributes are generated in a schematic manner, driven by personal value orientations. The effect of personal value orientations was strong and largely unmediated by attitudes of an intermediate level of generality, suggesting that the dependent variables in the particular attitude system that was modelled here can be understood as value judgments in a literal sense. Copyright © 2012. Published by Elsevier Ltd.

Nearest neighbor imputation of species-level, plot-scale forest structure attributes from LiDAR data

Treesearch

Andrew T. Hudak; Nicholas L. Crookston; Jeffrey S. Evans; David E. Hall; Michael J. Falkowski

2008-01-01

Meaningful relationships between forest structure attributes measured in representative field plots on the ground and remotely sensed data measured comprehensively across the same forested landscape facilitate the production of maps of forest attributes such as basal area (BA) and tree density (TD). Because imputation methods can efficiently predict multiple response...

Point pattern match-based change detection in a constellation of previously detected objects

DOEpatents

Paglieroni, David W.

2016-06-07

A method and system is provided that applies attribute- and topology-based change detection to objects that were detected on previous scans of a medium. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, detection strength, size, elongation, orientation, etc. The locations define a three-dimensional network topology forming a constellation of previously detected objects. The change detection system stores attributes of the previously detected objects in a constellation database. The change detection system detects changes by comparing the attributes and topological consistency of newly detected objects encountered during a new scan of the medium to previously detected objects in the constellation database. The change detection system may receive the attributes of the newly detected objects as the objects are detected by an object detection system in real time.

Computational methods in the development of a knowledge-based system for the prediction of solid catalyst performance.

PubMed

Procelewska, Joanna; Galilea, Javier Llamas; Clerc, Frederic; Farrusseng, David; Schüth, Ferdi

2007-01-01

The objective of this work is the construction of a correlation between characteristics of heterogeneous catalysts, encoded in a descriptor vector, and their experimentally measured performances in the propene oxidation reaction. In this paper the key issue in the modeling process, namely the selection of adequate input variables, is explored. Several data-driven feature selection strategies were applied in order to obtain an estimate of the differences in variance and information content of various attributes, furthermore to compare their relative importance. Quantitative property activity relationship techniques using probabilistic neural networks have been used for the creation of various semi-empirical models. Finally, a robust classification model, assigning selected attributes of solid compounds as input to an appropriate performance class in the model reaction was obtained. It has been evident that the mathematical support for the primary attributes set proposed by chemists can be highly desirable.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iyengar, Anagha; Beach, Matthew; Newby, Robert J.

Neutron background measurements using a mobile trailer-based system were conducted in Knoxville, Tennessee. The 0.5 m 2 system consisting of 8 EJ-301 liquid scintillation detectors was used to collect neutron background measurements in order to better understand the systematic background variations that depend solely on the street-level measurement position in a local, downtown area. Data was collected along 5 different streets in the downtown Knoxville area, and the measurements were found to be repeatable. Using 10-min measurements, fractional uncertainty in each measured data point was <2%. Compared with fast neutron background count rates measured away from downtown Knoxville, a reductionmore » in background count rates ranging from 10-50% was observed in the downtown area, sometimes varying substantially over distances of tens of meters. These reductions are attributed to the shielding of adjacent buildings, quantified in part here by the metric angle-of-open-sky. The adjacent buildings may serve to shield cosmic ray neutron flux.« less

Building MapObjects attribute field in cadastral database based on the method of Jackson system development

NASA Astrophysics Data System (ADS)

Chen, Zhu-an; Zhang, Li-ting; Liu, Lu

2009-10-01

ESRI's GIS components MapObjects are applied in many cadastral information system because of its miniaturization and flexibility. Some cadastral information was saved in cadastral database directly by MapObjects's Shape file format in this cadastral information system. However, MapObjects didn't provide the function of building attribute field for map layer's attribute data file in cadastral database and user cann't save the result of analysis. This present paper designed and realized the function of building attribute field in MapObjects based on the method of Jackson's system development.

Using Quality Attributes to Bridge Systems Engineering Gaps : A Juno Ground Data Systems Case Study

NASA Technical Reports Server (NTRS)

Dubon, Lydia P.; Jackson, Maddalena M.; Thornton, Marla S.

2012-01-01

The Juno Mission to Jupiter is the second mission selected by the NASA New Frontiers Program. Juno launched August 2011 and will reach Jupiter July 2016. Juno's payload system is composed of nine instruments plus a gravity science experiment. One of the primary functions of the Juno Ground Data System (GDS) is the assembly and distribution of the CFDP (CCSDS File Delivery Protocol) product telemetry, also referred to as raw science data, for eight out of the nine instruments. The GDS accomplishes this with the Instrument Data Pipeline (IDP). During payload integration, the first attempt to exercise the IDP in a flight like manner revealed that although the functional requirements were well understood, the system was unable to meet latency requirements with the as-is heritage design. A systems engineering gap emerged between Juno instrument data delivery requirements and the assumptions behind the heritage flight-ground interactions. This paper describes the use of quality attributes to measure and overcome this gap by introducing a new systems engineering activity, and a new monitoring service architecture that successfully delivered the performance metrics needed to validate Juno IDP.

Predicting bulk permeability using outcrop fracture attributes: The benefits of a Maximum Likelihood Estimator

NASA Astrophysics Data System (ADS)

Rizzo, R. E.; Healy, D.; De Siena, L.

2015-12-01

The success of any model prediction is largely dependent on the accuracy with which its parameters are known. In characterising fracture networks in naturally fractured rocks, the main issues are related with the difficulties in accurately up- and down-scaling the parameters governing the distribution of fracture attributes. Optimal characterisation and analysis of fracture attributes (fracture lengths, apertures, orientations and densities) represents a fundamental step which can aid the estimation of permeability and fluid flow, which are of primary importance in a number of contexts ranging from hydrocarbon production in fractured reservoirs and reservoir stimulation by hydrofracturing, to geothermal energy extraction and deeper Earth systems, such as earthquakes and ocean floor hydrothermal venting. This work focuses on linking fracture data collected directly from outcrops to permeability estimation and fracture network modelling. Outcrop studies can supplement the limited data inherent to natural fractured systems in the subsurface. The study area is a highly fractured upper Miocene biosiliceous mudstone formation cropping out along the coastline north of Santa Cruz (California, USA). These unique outcrops exposes a recently active bitumen-bearing formation representing a geological analogue of a fractured top seal. In order to validate field observations as useful analogues of subsurface reservoirs, we describe a methodology of statistical analysis for more accurate probability distribution of fracture attributes, using Maximum Likelihood Estimators. These procedures aim to understand whether the average permeability of a fracture network can be predicted reducing its uncertainties, and if outcrop measurements of fracture attributes can be used directly to generate statistically identical fracture network models.

Defining attributes of patient safety through a concept analysis.

PubMed

Kim, Linda; Lyder, Courtney H; McNeese-Smith, Donna; Leach, Linda Searle; Needleman, Jack

2015-11-01

The aim of this study was to report an analysis of the concept of patient safety. Despite recent increase in the number of work being done to clarify the concept and standardize measurement of patient safety, there are still huge variations in how the term is conceptualized and how to measure patient safety data across various healthcare settings and in research. Concept analysis. A literature search was conducted through PubMed and Cumulative Index to Nursing and Allied Health Literature, Plus using the terms 'patient safety' in the title and 'concept analysis,' 'attributes' or 'definition' in the title and or abstract. All English language literature published between 2002-2014 were considered for the review. Walker and Avant's method guided this analysis. The defining attributes of patient safety include prevention of medical errors and avoidable adverse events, protection of patients from harm or injury and collaborative efforts by individual healthcare providers and a strong, well-integrated healthcare system. The application of Collaborative Alliance of Nursing Outcomes indicators as empirical referents would facilitate the measurement of patient safety. With the knowledge gained from this analysis, nurses may improve patient surveillance efforts that identify potential hazards before they become adverse events and have a stronger voice in health policy decision-making that influence implementation efforts aimed at promoting patient safety, worldwide. Further studies are needed on development of a conceptual model and framework that can aid with collection and measurement of standardized patient safety data. © 2015 John Wiley & Sons Ltd.

Three-M in Word Problem Solving

ERIC Educational Resources Information Center

Hajra, Sayonita Ghosh; Kofman, Victoria

2018-01-01

We describe three activities that help undergraduates (pre-service teachers) to develop scientific vocabulary on measurable attributes and units of measurement. Measurable attributes are important features in understanding a word problem and solving the problem. These activities help students comprehend word problems better by identifying…

Online Game Addiction among Chinese College Students Measurement and Attribution.

PubMed

Zhou, Yuqiong; Li, Zhitian

2009-01-01

This study made an initial attempt to measure and attribute online game addiction among Chinese college students. We generated three factors of online game addiction: Control Disorder, Conflict, and Injury, as well as proposed a comprehensive model that attributed online game addiction to three groups of driving forces: environmental influences (most significant), characteristics of online games, and personal reasons.

A novel 3D imaging system for strawberry phenotyping.

PubMed

He, Joe Q; Harrison, Richard J; Li, Bo

2017-01-01

Accurate and quantitative phenotypic data in plant breeding programmes is vital in breeding to assess the performance of genotypes and to make selections. Traditional strawberry phenotyping relies on the human eye to assess most external fruit quality attributes, which is time-consuming and subjective. 3D imaging is a promising high-throughput technique that allows multiple external fruit quality attributes to be measured simultaneously. A low cost multi-view stereo (MVS) imaging system was developed, which captured data from 360° around a target strawberry fruit. A 3D point cloud of the sample was derived and analysed with custom-developed software to estimate berry height, length, width, volume, calyx size, colour and achene number. Analysis of these traits in 100 fruits showed good concordance with manual assessment methods. This study demonstrates the feasibility of an MVS based 3D imaging system for the rapid and quantitative phenotyping of seven agronomically important external strawberry traits. With further improvement, this method could be applied in strawberry breeding programmes as a cost effective phenotyping technique.

Causal attributions in parents of babies with a cleft lip and/or palate and their association with psychological well-being.

PubMed

Nelson, Jonathan; O'Leary, Catherine; Weinman, John

2009-07-01

This study aimed to assess causal attributions of parents of babies with a cleft lip and/or palate. Evidence from causal attribution theory and attribution studies in other medical conditions led to the hypothesis that parents who make internal attributions (self-blame) will have poorer psychological well-being. A cross-sectional survey. Postal questionnaires were sent to parents of children under the care of the South Thames Cleft Service at Guy's Hospital. PARTICIPANTS were recruited if they had a baby between 12 and 24 months old with a cleft lip and/or palate. Of 204 parents, 42 responded. A semistructured questionnaire about causal beliefs was completed alongside validated questionnaires measuring anxiety, depression (Hospital Anxiety and Depression Scale), and perceived stress (Perceived Stress Scale). Causal attributions were grouped according to type (environmental, chance, self-blame, and no belief) and loci (external or internal). The most common attribution made was to external factors (54.4%), followed by no causal attribution (38.1%). Parents making an internal (self-blaming) attribution (16.7%) had significantly (p < .05) higher scores on the Hospital Anxiety and Depression Scale anxiety measure (r = .32) and Perceived Stress Scale (r = .33), but not on the Hospital Anxiety and Depression Scale depression measure (p = .283). The high number of parents making an external attribution can be explained by causal attribution theory. However, the percentage of parents making no causal attribution was higher than seen in previous research. Surprisingly, no parents blamed others. The main hypothesis was tentatively accepted because there were significantly higher anxiety and stress scores in parents who self-blamed; although, depression scores were not significantly higher.

Measurement and Analysis of Soldiers’ Value Systems Change during Infantry Initial Entry Training.

DTIC Science & Technology

1982-12-01

Media". Journal of Advertising Research , 21, (October 1981): 37-43. Blair, John D. "Social and Value Integration of Youth in the Military". Youth and...Society 10 (September 1978): 33-46. Boote, Alfred S. "Market Segmentation by Personal Values and Salient Product Attributes". Journal of Advertising Research 21

Learner Centric in M-Learning: Integration of Security, Dependability and Trust

ERIC Educational Resources Information Center

Mahalingam, Sheila; Abdollah, Faizal Mohd; Sahib, Shahrin

2014-01-01

The paper focus on learner centric attributes in a m-learning environment encounters the security measurements. In order to build up a systematic threat and countermeasure for protecting the learners as well as providing awareness and satisfaction in utilizing the mobile learning system, a security model need to be overhauled. The brief literature…

A REVIEW OF HOUSEHOLD DRINKING WATER INTERVENTION TRIALS AND AN APPROACH TO THE ESTIMATION OF ENDEMIC WATERBORNE GASTROENTERITIS IN THE UNITED STATES

EPA Science Inventory

The incidence of acute gastrointestinal illness (AGI) attributable to public drinking water systems in the United States cannot be directly measured but must be estimated based on epidemiologic studies and other information. The randomized trial is one study design used to evalua...

A Methodology for Selection of a Satellite Servicing Architecture. Volume 3. Appendices.

DTIC Science & Technology

1985-12-01

draft copies of this work is greatly appreciated. Dis DII ii, I - A special measure of gratitude belongs to Major Dennis Clark for his help with...bute pair when its complementary set changed values, that pair of attributes can be considered PPI of its complemen- tary set. It is recommended that...a system. 2-2 Mission Accomplishment: The system is desired to accomplish its mission by meeting various specifica- tions. These specifications

Path integrals, the ABL rule and the three-box paradox

NASA Astrophysics Data System (ADS)

Sokolovski, D.; Puerto Giménez, I.; Sala Mayato, R.

2008-10-01

The three-box problem is analysed in terms of virtual pathways, interference between which is destroyed by a number of intermediate measurements. The Aharonov-Bergmann-Lebowitz (ABL) rule is shown to be a particular case of Feynman's recipe for assigning probabilities to exclusive alternatives. The ‘paradoxical’ features of the three box case arise in an attempt to attribute, in contradiction to the uncertainty principle, properties pertaining to different ensembles produced by different intermediate measurements to the same particle. The effect can be mimicked by a classical system, provided an observation is made to perturb the system in a non-local manner.

The association between attributions of responsibility for motor vehicle accidents and patient satisfaction: a study within a no-fault injury compensation system.

PubMed

Thompson, Jason; Berk, Michael; O'Donnell, Meaghan; Stafford, Lesley; Nordfjaern, Trond

2015-05-01

This study set out to test the relationship between attributions of responsibility for motor vehicle accidents and satisfaction with personal injury compensation systems. The study analysed survey data from 1394 people injured in a motor vehicle accident who were compensated under a no-fault personal injury compensation system. Patients' ratings of satisfaction with the compensation system across five domains (resolves your issues, keeps you up-to-date, treats you as an individual, cares about you, and overall satisfaction) were analysed alongside patient attributions of responsibility for their accident (not responsible, partly responsible, totally responsible). Postaccident physical and mental health status, age, gender, and duration of compensation claim were controlled for in the analysis. A multivariate analysis of covariance indicated attributions of responsibility for accidents were significantly associated with levels of patient satisfaction across all five domains under study (F (10, 2084) = 3.7, p<0.001, η(2)  =0.02). Despite access to virtually indistinguishable services, patients who attributed responsibility for their accidents to others were significantly less satisfied with the injury compensation system than those who attributed responsibility to themselves. Satisfaction with no-fault motor vehicle injury compensation services are associated with patients' attributions of responsibility for their accident. Compensation systems and other rehabilitation services monitoring patient satisfaction should adjust for attributions of responsibility when assessing levels of patient satisfaction between time periods, services, or injured populations. Differences in levels of patient satisfaction observed between compensation or rehabilitation populations may reflect differences in attributions of responsibility for accidents rather than objective service quality. © The Author(s) 2014.

Podium: Ranking Data Using Mixed-Initiative Visual Analytics.

PubMed

Wall, Emily; Das, Subhajit; Chawla, Ravish; Kalidindi, Bharath; Brown, Eli T; Endert, Alex

2018-01-01

People often rank and order data points as a vital part of making decisions. Multi-attribute ranking systems are a common tool used to make these data-driven decisions. Such systems often take the form of a table-based visualization in which users assign weights to the attributes representing the quantifiable importance of each attribute to a decision, which the system then uses to compute a ranking of the data. However, these systems assume that users are able to quantify their conceptual understanding of how important particular attributes are to a decision. This is not always easy or even possible for users to do. Rather, people often have a more holistic understanding of the data. They form opinions that data point A is better than data point B but do not necessarily know which attributes are important. To address these challenges, we present a visual analytic application to help people rank multi-variate data points. We developed a prototype system, Podium, that allows users to drag rows in the table to rank order data points based on their perception of the relative value of the data. Podium then infers a weighting model using Ranking SVM that satisfies the user's data preferences as closely as possible. Whereas past systems help users understand the relationships between data points based on changes to attribute weights, our approach helps users to understand the attributes that might inform their understanding of the data. We present two usage scenarios to describe some of the potential uses of our proposed technique: (1) understanding which attributes contribute to a user's subjective preferences for data, and (2) deconstructing attributes of importance for existing rankings. Our proposed approach makes powerful machine learning techniques more usable to those who may not have expertise in these areas.

The Benefits of Maximum Likelihood Estimators in Predicting Bulk Permeability and Upscaling Fracture Networks

NASA Astrophysics Data System (ADS)

Emanuele Rizzo, Roberto; Healy, David; De Siena, Luca

2016-04-01

The success of any predictive model is largely dependent on the accuracy with which its parameters are known. When characterising fracture networks in fractured rock, one of the main issues is accurately scaling the parameters governing the distribution of fracture attributes. Optimal characterisation and analysis of fracture attributes (lengths, apertures, orientations and densities) is fundamental to the estimation of permeability and fluid flow, which are of primary importance in a number of contexts including: hydrocarbon production from fractured reservoirs; geothermal energy extraction; and deeper Earth systems, such as earthquakes and ocean floor hydrothermal venting. Our work links outcrop fracture data to modelled fracture networks in order to numerically predict bulk permeability. We collected outcrop data from a highly fractured upper Miocene biosiliceous mudstone formation, cropping out along the coastline north of Santa Cruz (California, USA). Using outcrop fracture networks as analogues for subsurface fracture systems has several advantages, because key fracture attributes such as spatial arrangements and lengths can be effectively measured only on outcrops [1]. However, a limitation when dealing with outcrop data is the relative sparseness of natural data due to the intrinsic finite size of the outcrops. We make use of a statistical approach for the overall workflow, starting from data collection with the Circular Windows Method [2]. Then we analyse the data statistically using Maximum Likelihood Estimators, which provide greater accuracy compared to the more commonly used Least Squares linear regression when investigating distribution of fracture attributes. Finally, we estimate the bulk permeability of the fractured rock mass using Oda's tensorial approach [3]. The higher quality of this statistical analysis is fundamental: better statistics of the fracture attributes means more accurate permeability estimation, since the fracture attributes feed directly into the permeability calculations. The application of Maximum Likelihood Estimators can have important consequences, especially when we aim to predict the tendency of fracture attributes towards smaller and larger scales than those observed, in order to build consistent, useable models from outcrop observations. The procedures presented here aim to understand whether the average permeability of a fracture network can be predicted, reducing its uncertainties; and if outcrop measurements of fracture attributes can be used directly to generate statistically identical fracture network models, which can then be easily up-scaled into larger areas or volumes. Gale et al. "Natural Fracture in shale: A review and new observations", AAPG Bulletin 98.11 (2014). Mauldon et al. "Circular scanlines and circular windows: new tools for characterizing the geometry of fracture traces", Journal of Structural Geology, 23 (2001). Oda "Permeability tensor for discontinuous rock masses", Geotechnique 35.4 (1985).

Implicit measures: A normative analysis and review.

PubMed

De Houwer, Jan; Teige-Mocigemba, Sarah; Spruyt, Adriaan; Moors, Agnes

2009-05-01

Implicit measures can be defined as outcomes of measurement procedures that are caused in an automatic manner by psychological attributes. To establish that a measurement outcome is an implicit measure, one should examine (a) whether the outcome is causally produced by the psychological attribute it was designed to measure, (b) the nature of the processes by which the attribute causes the outcome, and (c) whether these processes operate automatically. This normative analysis provides a heuristic framework for organizing past and future research on implicit measures. The authors illustrate the heuristic function of their framework by using it to review past research on the 2 implicit measures that are currently most popular: effects in implicit association tests and affective priming tasks. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

How do different humanness measures relate? Confronting the attribution of secondary emotions, human uniqueness, and human nature traits.

PubMed

Martínez, Rocío; Rodriguez-Bailon, Rosa; Moya, Miguel; Vaes, Jeroen

2017-01-01

The present research examines the relationship between the infrahumanization approach and the two-dimensional model of humanness: an issue that has received very little empirical attention. In Study 1, we created three unknown groups (Humanized, Animalized, and Mechanized) granting/denying them Human Nature (HN) and Human Uniqueness (HU) traits. The attribution of primary/secondary emotions was measured. As expected, participants attributed more secondary emotions to the humanized compared to dehumanized groups. Importantly, both animalized and mechanized groups were attributed similar amounts of secondary emotions. In Study 2, the groups were described in terms of their capacity to express secondary emotions. We measured the attribution of HN/HU traits. Results showed that the infrahumanized group was denied both HU/HN traits. The results highlight the importance of considering the common aspects of both approaches in understanding processes of dehumanization.

Latent effects decision analysis

DOEpatents

Cooper, J Arlin [Albuquerque, NM; Werner, Paul W [Albuquerque, NM

2004-08-24

Latent effects on a system are broken down into components ranging from those far removed in time from the system under study (latent) to those which closely effect changes in the system. Each component is provided with weighted inputs either by a user or from outputs of other components. A non-linear mathematical process known as `soft aggregation` is performed on the inputs to each component to provide information relating to the component. This information is combined in decreasing order of latency to the system to provide a quantifiable measure of an attribute of a system (e.g., safety) or to test hypotheses (e.g., for forensic deduction or decisions about various system design options).

The relationship between basic audio quality and overall listening experience.

PubMed

Schoeffler, Michael; Herre, Jürgen

2016-09-01

Basic audio quality (BAQ) is a well-known perceptual attribute, which is rated in various listening test methods to measure the performance of audio systems. Unfortunately, when it comes to purchasing audio systems, BAQ might not have a significant influence on the customers' buying decisions since other factors, like brand loyalty, might be more important. In contrast to BAQ, overall listening experience (OLE) is an affective attribute which incorporates all aspects that are important to an individual assessor, including his or her preference for music genre and audio quality. In this work, the relationship between BAQ and OLE is investigated in more detail. To this end, an experiment was carried out, in which participants rated the BAQ and the OLE of music excerpts with different timbral and spatial degradations. In a between-group-design procedure, participants were assigned into two groups, in each of which a different set of stimuli was rated. The results indicate that rating of both attributes, BAQ and OLE, leads to similar rankings, even if a different set of stimuli is rated. In contrast to the BAQ ratings, which were more influenced by timbral than spatial degradations, the OLE ratings were almost equally influenced by timbral and spatial degradations.

Accelerated degradation of silicon metallization systems

NASA Technical Reports Server (NTRS)

Lathrop, J. W.

1983-01-01

Clemson University has been engaged for the past five years in a program to determine the reliability attributes of solar cells by means of accelerated test procedures. The cells are electrically measured and visually inspected and then subjected for a period of time to stress in excess of that normally encountered in use, and then they are reinspected. Changes are noted and the process repeated. This testing has thus far involved 23 different unencapsulated cell types from 12 different manufacturers, and 10 different encapsulated cell types from 9 different manufacturers. Reliability attributes of metallization systems can be classified as major or minor, depending on the severity of the effects observed. As a result of the accelerated testing conducted under the Clemson program, major effects have been observed related to contact resistance and to mechanical adherence and solderability. This paper does not attempt a generalized survey of accelerated test results, but rather concentrates on one particular attribute of metallization that has been observed to cause electrical degradation - increased contact resistance due to Schottky barrier formation. In this example basic semiconductor theory was able to provide an understanding of the electrical effects observed during accelerated stress testing.

Motivational Differences in Seeking Out Evaluative Categorization Information.

PubMed

Smallman, Rachel; Becker, Brittney

2017-07-01

Previous research shows that people draw finer evaluative distinctions when rating liked versus disliked objects (e.g., wanting a 5-point scale to evaluate liked cuisines and a 3-point scale to rate disliked cuisines). Known as the preference-categorization effect, this pattern may exist not only in how individuals form evaluative distinctions but also in how individuals seek out evaluative information. The current research presents three experiments that examine motivational differences in evaluative information seeking (rating scales and attributes). Experiment 1 found that freedom of choice (the ability to avoid undesirable stimuli) and sensitivity to punishment (as measured by the Behavior Inhibition System/Behavioral Approach System [BIS/BAS] scale) influenced preferences for desirable and undesirable evaluative information in a health-related decision. Experiment 2 examined choice optimization, finding that maximizers prefer finer evaluative information for both liked and disliked options in a consumer task. Experiment 3 found that this pattern generalizes to another type of evaluative categorization, attributes.

Probabilistic confidence for decisions based on uncertain reliability estimates

NASA Astrophysics Data System (ADS)

Reid, Stuart G.

2013-05-01

Reliability assessments are commonly carried out to provide a rational basis for risk-informed decisions concerning the design or maintenance of engineering systems and structures. However, calculated reliabilities and associated probabilities of failure often have significant uncertainties associated with the possible estimation errors relative to the 'true' failure probabilities. For uncertain probabilities of failure, a measure of 'probabilistic confidence' has been proposed to reflect the concern that uncertainty about the true probability of failure could result in a system or structure that is unsafe and could subsequently fail. The paper describes how the concept of probabilistic confidence can be applied to evaluate and appropriately limit the probabilities of failure attributable to particular uncertainties such as design errors that may critically affect the dependability of risk-acceptance decisions. This approach is illustrated with regard to the dependability of structural design processes based on prototype testing with uncertainties attributable to sampling variability.

Formation of Sharp Eccentric Rings in Debris Disks with Gas but Without Planets

NASA Technical Reports Server (NTRS)

Lyra, W.; Kuchner, M.

2013-01-01

'Debris disks' around young stars (analogues of the Kuiper Belt in our Solar System) show a variety of non-trivial structures attributed to planetary perturbations and used to constrain the properties of those planets. However, these analyses have largely ignored the fact that some debris disks are found to contain small quantities of gas, a component that all such disks should contain at some level. Several debris disks have been measured with a dust-to-gas ratio of about unity, at which the effect of hydrodynamics on the structure of the disk cannot be ignored. Here we report linear and nonlinear modelling that shows that dust-gas interactions can produce some of the key patterns attributed to planets. We find a robust clumping instability that organizes the dust into narrow, eccentric rings, similar to the Fomalhaut debris disk. The conclusion that such disks might contain planets is not necessarily required to explain these systems.

The Open Perimetry Interface: an enabling tool for clinical visual psychophysics.

PubMed

Turpin, Andrew; Artes, Paul H; McKendrick, Allison M

2012-01-01

Perimeters are commercially available instruments for measuring various attributes of the visual field in a clinical setting. They have several advantages over traditional lab-based systems for conducting vision experiments, including built-in gaze tracking and calibration, polished appearance, and attributes to increase participant comfort. Prior to this work, there was no standard to control such instruments, making it difficult and time consuming to use them for novel psychophysical experiments. This paper introduces the Open Perimetry Interface (OPI), a standard set of functions that can be used to control perimeters. Currently the standard is partially implemented in the open-source programming language R on two commercially available instruments: the Octopus 900 (a projection-based bowl perimeter produced by Haag-Streit, Switzerland) and the Heidelberg Edge Perimeter (a CRT-based system produced by Heidelberg Engineering, Germany), allowing these instruments to be used as a platform for psychophysical experimentation.

A Wearable Mobile Sensor Platform to Assist Fruit Grading

PubMed Central

Aroca, Rafael V.; Gomes, Rafael B.; Dantas, Rummennigue R.; Calbo, Adonai G.; Gonçalves, Luiz M. G.

2013-01-01

Wearable computing is a form of ubiquitous computing that offers flexible and useful tools for users. Specifically, glove-based systems have been used in the last 30 years in a variety of applications, but mostly focusing on sensing people's attributes, such as finger bending and heart rate. In contrast, we propose in this work a novel flexible and reconfigurable instrumentation platform in the form of a glove, which can be used to analyze and measure attributes of fruits by just pointing or touching them with the proposed glove. An architecture for such a platform is designed and its application for intuitive fruit grading is also presented, including experimental results for several fruits. PMID:23666134

Measuring Website Quality: Asymmetric Effect of User Satisfaction

ERIC Educational Resources Information Center

Kincl, Tomas; Strach, Pavel

2012-01-01

Website quality measurement tools have been largely static and have struggled to determine relevant attributes of user satisfaction. This study compares and contrasts attributes of user satisfaction based on usability guidelines seeking to identify practical easy-to-administer measurement tools. The website users assessed business school homepages…

Review of the CIE system of colorimetry and its use in dentistry.

PubMed

Westland, Stephen

2003-01-01

When we observe the light reflected from surfaces in a scene or look directly at light emitted by light sources, we experience the sensation of color. Color is just one attribute of a complex and not fully understood set of properties that define the appearance of our surroundings. To measure or specify the color of an object, we need to take into account the nature of the light under which the object is viewed, the spectral reflectance properties of the surface, and the properties of the human color vision system. In this article the CIE system of colorimetry is briefly reviewed and its limitations are described. The consequences of these limitations for color measurement in dentistry are discussed.

Method and apparatus for identifying conductive objects by monitoring the true resistive component of impedance change in a coil system caused by the object

DOEpatents

Gregory, William D.; Capots, Larry H.; George, James P.; Janik, Richard

1981-01-01

The type of conductor, its property, and if a metal, its type and cross-sectional area can be obtained from measurements made at different frequencies for the amount of unbalance created in a previously balanced stable coil detection system. The true resistive component is accurately measured and thus reflects only the voltage loss attributable to eddy currents caused by introduction of the test sample to the coil system. This voltage divided by corresponding applied frequency gives a curve which peaks at a frequency dependent upon type of conductor. For a metal this peak frequency is proportional to the samples resistivity divided by its cross-sectional area.

Fault detection of helicopter gearboxes using the multi-valued influence matrix method

NASA Technical Reports Server (NTRS)

Chin, Hsinyung; Danai, Kourosh; Lewicki, David G.

1993-01-01

In this paper we investigate the effectiveness of a pattern classifying fault detection system that is designed to cope with the variability of fault signatures inherent in helicopter gearboxes. For detection, the measurements are monitored on-line and flagged upon the detection of abnormalities, so that they can be attributed to a faulty or normal case. As such, the detection system is composed of two components, a quantization matrix to flag the measurements, and a multi-valued influence matrix (MVIM) that represents the behavior of measurements during normal operation and at fault instances. Both the quantization matrix and influence matrix are tuned during a training session so as to minimize the error in detection. To demonstrate the effectiveness of this detection system, it was applied to vibration measurements collected from a helicopter gearbox during normal operation and at various fault instances. The results indicate that the MVIM method provides excellent results when the full range of faults effects on the measurements are included in the training set.

Performance Measurement and Target-Setting in California's Safety Net Health Systems.

PubMed

Hemmat, Shirin; Schillinger, Dean; Lyles, Courtney; Ackerman, Sara; Gourley, Gato; Vittinghoff, Eric; Handley, Margaret; Sarkar, Urmimala

Health policies encourage implementing quality measurement with performance targets. The 2010-2015 California Medicaid waiver mandated quality measurement and reporting. In 2013, California safety net hospitals participating in the waiver set a voluntary performance target (the 90th percentile for Medicare preferred provider organization plans) for mammography screening and cholesterol control in diabetes. They did not reach the target, and the difference-in-differences analysis suggested that there was no difference for mammography ( P = .39) and low-density lipoprotein control ( P = .11) performance compared to measures for which no statewide quality improvement initiative existed. California's Medicaid waiver was associated with improved performance on a number of metrics, but this performance was not attributable to target setting on specific health conditions. Performance may have improved because of secular trends or systems improvements related to waiver funding. Relying on condition-specific targets to measure performance may underestimate improvements and disadvantage certain health systems. Achieving ambitious targets likely requires sustained fiscal, management, and workforce investments.

Group attributional training as an effective approach to human resource development under team work systems.

PubMed

Wang, Z M

1994-07-01

An experimental programme of group attributional training under team work system was conducted as part of human resource development in Chinese industrial enterprises. One hundred and ten shopfloor employees participated in the study. Among them, 58 employees took part in the factorial-designed experiment to find out the effects of attributions on performance, and 52 employees of ten work groups participated in the group attributional training programme twice a week for two months. The results showed that the group attributional training was effective in modifying employees' attributional patterns and enhancing group performance and satisfaction. On the basis of the results, an attributional model of work motivation is proposed, and its theoretical and practical implications for human resource management discussed.

The Role of Perceptual Similarity, Context, and Situation When Selecting Attributes: Considerations Made by 5-6-Year-Olds in Data Modeling Environments

ERIC Educational Resources Information Center

Leavy, Aisling; Hourigan, Mairead

2018-01-01

Classroom data modeling involves posing questions, identifying attributes of phenomena, measuring and structuring these attributes, and then composing, revising, and communicating the outcomes. Selecting attributes is a fundamental component of data modeling, and the considerations made when selecting attributes is the focus of this paper. A…

Simplified optical fiber RGB system in evaluating intrinsic quality of Sala mango

NASA Astrophysics Data System (ADS)

Yahaya, Ommi Kalsom Mardziah; Jafri, Mohd. Zubir Mat; Aziz, Azlan Abdul; Omar, Ahmad Fairuz

2015-06-01

This study presents an alternative approach for the nondestructive assessment of fruit quality parameters with the use of a simplified optical fiber red-green-blue system (OF-RGB). The optical sensor system presented in this work is designed to rapidly measure the firmness, acidity, and soluble solid content of an intact Sala mango on the basis of color properties. The system consists of three light-emitting diodes with peak emission at 635 (red), 525 (green), and 470 nm (blue), as well as a single photodetector capable of sensing visible light. The measurements were conducted using the reflectance technique. The analyses were conducted by comparing the results obtained through the proposed system with those measured using two commercial spectrometers, namely, QE65000 and FieldSpec 3. The developed RGB system showed satisfactory accuracy in the measurement of acidity (R2=0.795) and firmness (R2=0.761), but a relatively lower accuracy in the measurement of soluble solid content (R2=0.593) of intact mangoes. The results obtained through OF-RGB are comparable with those measured by QE65000 and FieldSpec 3. This system is a promising new technology with rapid response, easy operation, and low cost with potential applications in the nondestructive assessment of quality attributes.

MISAGA: An Algorithm for Mining Interesting Subgraphs in Attributed Graphs.

PubMed

He, Tiantian; Chan, Keith C C

2018-05-01

An attributed graph contains vertices that are associated with a set of attribute values. Mining clusters or communities, which are interesting subgraphs in the attributed graph is one of the most important tasks of graph analytics. Many problems can be defined as the mining of interesting subgraphs in attributed graphs. Algorithms that discover subgraphs based on predefined topologies cannot be used to tackle these problems. To discover interesting subgraphs in the attributed graph, we propose an algorithm called mining interesting subgraphs in attributed graph algorithm (MISAGA). MISAGA performs its tasks by first using a probabilistic measure to determine whether the strength of association between a pair of attribute values is strong enough to be interesting. Given the interesting pairs of attribute values, then the degree of association is computed for each pair of vertices using an information theoretic measure. Based on the edge structure and degree of association between each pair of vertices, MISAGA identifies interesting subgraphs by formulating it as a constrained optimization problem and solves it by identifying the optimal affiliation of subgraphs for the vertices in the attributed graph. MISAGA has been tested with several large-sized real graphs and is found to be potentially very useful for various applications.

The association between parental attributions of misbehavior and parenting practices in caregivers raising children with prenatal alcohol exposure: A mixed-methods study.

PubMed

Petrenko, Christie L M; Pandolfino, Mary E; Roddenbery, Rachael

2016-12-01

Limited research has focused on parenting practices used by caregivers raising children with fetal alcohol spectrum disorders (FASD). The current study hypothesized that parental attributions of children's misbehavior would relate to the parenting strategies caregivers utilize with children with FASD. This study also aimed to develop a coding scheme to allow quantification of these treatment-relevant constructs in future intervention trials. Thirty-one caregivers of children with FASD (age 4-8) were interviewed with the Parenting Practices Interview (PPI), a study-developed qualitative interview. Quantitative measures of FASD knowledge, parenting sense of competence and stress, and child behavior problems were included. Mixed-method analyses assessed the relationship between parental attributions of misbehavior and parenting practices. Caregivers who attributed their child's misbehavior to underlying neurodevelopmental disabilities were more likely to use antecedent strategies and feel more confident in managing their child's behavior. Parents who attributed their child's misbehavior to willful disobedience were more likely to rely on consequence strategies and feel more ineffective. Results are consistent with theoretical models for FASD parent training interventions. Assessment of theorized mechanisms of change in intervention trials is needed; the development of the PPI and quantitative coding system will facilitate this type of research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Representing sentence information

NASA Astrophysics Data System (ADS)

Perkins, Walton A., III

1991-03-01

This paper describes a computer-oriented representation for sentence information. Whereas many Artificial Intelligence (AI) natural language systems start with a syntactic parse of a sentence into the linguist's components: noun, verb, adjective, preposition, etc., we argue that it is better to parse the input sentence into 'meaning' components: attribute, attribute value, object class, object instance, and relation. AI systems need a representation that will allow rapid storage and retrieval of information and convenient reasoning with that information. The attribute-of-object representation has proven useful for handling information in relational databases (which are well known for their efficiency in storage and retrieval) and for reasoning in knowledge- based systems. On the other hand, the linguist's syntactic representation of the works in sentences has not been shown to be useful for information handling and reasoning. We think it is an unnecessary and misleading intermediate form. Our sentence representation is semantic based in terms of attribute, attribute value, object class, object instance, and relation. Every sentence is segmented into one or more components with the form: 'attribute' of 'object' 'relation' 'attribute value'. Using only one format for all information gives the system simplicity and good performance as a RISC architecture does for hardware. The attribute-of-object representation is not new; it is used extensively in relational databases and knowledge-based systems. However, we will show that it can be used as a meaning representation for natural language sentences with minor extensions. In this paper we describe how a computer system can parse English sentences into this representation and generate English sentences from this representation. Much of this has been tested with computer implementation.

Producing good font attribute determination using error-prone information

NASA Astrophysics Data System (ADS)

Cooperman, Robert

1997-04-01

A method to provide estimates of font attributes in an OCR system, using detectors of individual attributes that are error-prone. For an OCR system to preserve the appearance of a scanned document, it needs accurate detection of font attributes. However, OCR environments have noise and other sources of errors, tending to make font attribute detection unreliable. Certain assumptions about font use can greatly enhance accuracy. Attributes such as boldness and italics are more likely to change between neighboring words, while attributes such as serifness are less likely to change within the same paragraph. Furthermore, the document as a whole, tends to have a limited number of sets of font attributes. These assumptions allow a better use of context than the raw data, or what would be achieved by simpler methods that would oversmooth the data.

Male partners of women with provoked vestibulodynia: attributions for pain and their implications for dyadic adjustment, sexual satisfaction, and psychological distress.

PubMed

Jodoin, Mélanie; Bergeron, Sophie; Khalifé, Samir; Dupuis, Marie-José; Desrochers, Geneviève; Leclerc, Bianca

2008-12-01

Provoked vestibulodynia is a female genital pain condition that results in sexual dysfunction and impacts negatively on the couple. Although patients' causal attributions have been linked to worse psychosexual outcomes, no study has documented the male partners' perspective of this distressing problem and its potential influence on their psychosexual adaptation. To identify whether male partners' attributions for vestibulodynia are possible predictors of their dyadic adjustment, sexual functioning, sexual satisfaction, and psychological distress, as well as of women's pain and sexual functioning. Thirty-eight women with vestibulodynia first completed measures of pain intensity and sexual functioning. Male partners responded to mailed questionnaires assessing their own attributions for genital pain as well as their psychological distress, relationship adjustment, sexual functioning, and sexual satisfaction. Women completed the McGill-Melzack Pain Questionnaire (MPQ) and the Female Sexual Function Index (FSFI). Attributions of male partners were measured using an adapted version of the Attributional Style Questionnaire (ASQ)-Partner Version. Men also filled out the Brief Symptom Inventory (BSI), the Dyadic Adjustment Scale (DAS), the Sexual History Form (SHF), and the Global Measure of Sexual Satisfaction (GMSEX). All four negative attribution dimensions and higher levels of women's pain intensity successfully predicted increased psychological distress in male partners. Higher levels of both internal and global attributions were associated with men's poorer dyadic adjustment, whereas global and stable attributions were related to their lower sexual satisfaction. Attributions failed to significantly predict sexual functioning in male partners and women's pain and sexual functioning. Evaluation and treatment of sexual pain problems should involve both partners and should explore the role of negative attributions.

A comparative analysis of user preference-based and existing knowledge management systems attributes in the aerospace industry

NASA Astrophysics Data System (ADS)

Varghese, Nishad G.

Knowledge management (KM) exists in various forms throughout organizations. Process documentation, training courses, and experience sharing are examples of KM activities performed daily. The goal of KM systems (KMS) is to provide a tool set which serves to standardize the creation, sharing, and acquisition of business critical information. Existing literature provides numerous examples of targeted evaluations of KMS, focusing on specific system attributes. This research serves to bridge the targeted evaluations with an industry-specific, holistic approach. The user preferences of aerospace employees in engineering and engineering-related fields were compared to profiles of existing aerospace KMS based on three attribute categories: technical features, system administration, and user experience. The results indicated there is a statistically significant difference between aerospace user preferences and existing profiles in the user experience attribute category, but no statistically significant difference in the technical features and system administration attribute categories. Additional analysis indicated in-house developed systems exhibit higher technical features and user experience ratings than commercial-off-the-self (COTS) systems.

Development and Validation of the Poverty Attributions Survey

ERIC Educational Resources Information Center

Bennett, Robert M.; Raiz, Lisa; Davis, Tamara S.

2016-01-01

This article describes the process of developing and testing the Poverty Attribution Survey (PAS), a measure of poverty attributions. The PAS is theory based and includes original items as well as items from previously tested poverty attribution instruments. The PAS was electronically administered to a sample of state-licensed professional social…

Children's interpretive understanding, moral judgments, and emotion attributions: relations to social behaviour.

PubMed

Malti, Tina; Gasser, Luciano; Gutzwiller-Helfenfinger, Eveline

2010-06-01

The study investigated interpretive understanding, moral judgments, and emotion attributions in relation to social behaviour in a sample of 59 5-year-old, 123 7-year-old, and 130 9-year-old children. Interpretive understanding was assessed by two tasks measuring children's understanding of ambiguous situations. Moral judgments and emotion attributions were measured using two moral rule transgressions. Social behaviour was assessed using teachers' ratings of aggressive and prosocial behaviour. Aggressive behaviour was positively related to interpretive understanding and negatively related to moral reasoning. Prosocial behaviour was positively associated with attribution of fear. Moral judgments and emotion attributions were related, depending on age. Interpretive understanding was unrelated to moral judgments and emotion attributions. The findings are discussed in regard to the role of interpretive understanding and moral and affective knowledge in understanding children's social behaviour.

Integrated three-dimensional shape and reflection properties measurement system.

PubMed

Krzesłowski, Jakub; Sitnik, Robert; Maczkowski, Grzegorz

2011-02-01

Creating accurate three-dimensional (3D) digitalized models of cultural heritage objects requires that information about surface geometry be integrated with measurements of other material properties like color and reflectance. Up until now, these measurements have been performed in laboratories using manually integrated (subjective) data analyses. We describe an out-of-laboratory bidirectional reflectance distribution function (BRDF) and 3D shape measurement system that implements shape and BRDF measurement in a single setup with BRDF uncertainty evaluation. The setup aligns spatial data with the angular reflectance distribution, yielding a better estimation of the surface's reflective properties by integrating these two modality measurements into one setup using a single detector. This approach provides a better picture of an object's intrinsic material features, which in turn produces a higher-quality digitalized model reconstruction. Furthermore, this system simplifies the data processing by combining structured light projection and photometric stereo. The results of our method of data analysis describe the diffusive and specular attributes corresponding to every measured geometric point and can be used to render intricate 3D models in an arbitrarily illuminated scene.

Sky Mining - Application to Photomorphic Redshift Estimation

NASA Astrophysics Data System (ADS)

Nayak, Pragyansmita

The field of astronomy has evolved from the ancient craft of observing the sky. In it's present form, astronomers explore the cosmos not just by observing through the tiny visible window used by our eyes, but also by exploiting the electromagnetic spectrum from radio waves to gamma rays. The domain is undoubtedly at the forefront of data-driven science. The data growth rate is expected to be around 50%--100% per year. This data explosion is attributed largely to the large-scale wide and deep surveys of the different regions of the sky at multiple wavelengths (both ground and space-based surveys). This dissertation describes the application of machine learning methods to the estimation of galaxy redshifts leveraging such a survey data. Galaxy is a large system of stars held together by mutual gravitation and isolated from similar systems by vast regions of space. Our view of the universe is closely tied to our understanding of galaxy formation. Thus, a better understanding of the relative location of the multitudes of galaxies is crucial. The position of each galaxy can be characterized using three coordinates. Right Ascension (ra) and Declination (dec) are the two coordinates that locate the galaxy in two dimensions on the plane of the sky. It is relatively straightforward to measure them. In contrast, fixing the third coordinate that is the galaxy's distance from the observer along the line of sight (redshift 'z') is considerably more challenging. "Spectroscopic redshift" method gives us accurate and precise measurements of z. However, it is extremely time-intensive and unusable for faint objects. Additionally, the rate at which objects are being identified via photometric surveys far exceeds the rate at which the spectroscopic redshift measurements can keep pace in determining their distance. As the surveys go deeper into the sky, the proportion of faint objects being identified also continues to increase. In order to tackle both these drawbacks increasing in severity every day, alternative method "Photometric redshift" has been studied in the past. It uses the brightness of the object viewed through various standard filters, each of which lets through a relatively broad spectrum of colors. However, these methods are bound by the degeneracy problem (objects with different color profiles have the same redshift) which leads to low predictive accuracy. As part of our study, we are looking beyond color attributes to identify other measured attributes as degeneracy resolvers as well as generate estimators that are highly accurate; termed as "Photomorphic redshift" estimators. The present study investigates the photometric information of the objects such as color and magnitude (= observed flux) and morphology attributes such as shape, size, orientation and concentration in the different wavelengths. The specific type of magnitude used in this study are the PSF, Fiber and Petrosian magnitude. The morphology attributes are the ratio of Fiber to Petrosian magnitude, concentration index and Petrosian radius. All these attributes are in the five bands ugriz of the Sloan Digital Sky Survey (SDSS). Machine learning techniques based on Naive Bayes (NB), Bayesian Network (BN) and Generalized Linear Model (GLM) are researched to better understand their applicability, advantages and resulting predictive performance in terms of efficiency and accuracy. Note: The SDSS Data Release (DR) 10 data was used in the executed experiments (total of 700,777 galaxies with forty-five attributes associated with each galaxy). The significant findings of the present work are as follows: 1. Magnitude and morphology attributes have been found to be successful degeneracy resolvers. 2. Magnitude and morphology attributes have been found to be better redshift estimators than color attributes alone. 3. Naive Bayes, Bayesian Network and GLM have been found to be viable redshift estimation methods. Attribute selection is an important factor in computational performance. 4. In addition to the redshift estimate, the likelihood distribution of the estimate is even more useful, and my Bayesian Network models provide that information. This is particularly useful in ensemble methods as well as the kernel for mass distribution in the universe. 5. The generated Bayesian Network models can be applied to any of the variables, not just limited to redshift. Example applications include quality analysis and missing value imputation. Different types of Bayesian Network learning algorithms---constraint-based, score-based and hybrid---were investigated in detail.

Multiplicity Counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geist, William H.

2015-12-01

This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240Pu eff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

Evolutionary and Neural Computing Based Decision Support System for Disease Diagnosis from Clinical Data Sets in Medical Practice.

PubMed

Sudha, M

2017-09-27

As a recent trend, various computational intelligence and machine learning approaches have been used for mining inferences hidden in the large clinical databases to assist the clinician in strategic decision making. In any target data the irrelevant information may be detrimental, causing confusion for the mining algorithm and degrades the prediction outcome. To address this issue, this study attempts to identify an intelligent approach to assist disease diagnostic procedure using an optimal set of attributes instead of all attributes present in the clinical data set. In this proposed Application Specific Intelligent Computing (ASIC) decision support system, a rough set based genetic algorithm is employed in pre-processing phase and a back propagation neural network is applied in training and testing phase. ASIC has two phases, the first phase handles outliers, noisy data, and missing values to obtain a qualitative target data to generate appropriate attribute reduct sets from the input data using rough computing based genetic algorithm centred on a relative fitness function measure. The succeeding phase of this system involves both training and testing of back propagation neural network classifier on the selected reducts. The model performance is evaluated with widely adopted existing classifiers. The proposed ASIC system for clinical decision support has been tested with breast cancer, fertility diagnosis and heart disease data set from the University of California at Irvine (UCI) machine learning repository. The proposed system outperformed the existing approaches attaining the accuracy rate of 95.33%, 97.61%, and 93.04% for breast cancer, fertility issue and heart disease diagnosis.

The role of observer variation in determining Rosgen stream types in northeastern Oregon mountain streams

Treesearch

Brett B. Roper; John M. Buffington; Eric Archer; Chris Moyer; Mike Ward

2008-01-01

Consistency in determining Rosgen stream types was evaluated in 12 streams within the John Day Basin, northeastern Oregon. The Rosgen classification system is commonly used in the western United States and is based on the measurement of five stream attributes: entrenchment ratio, width-to-depth ratio, sinuosity, slope, and substrate size. Streams were classified from...

Do Inequalities in Neighborhood Walkability Drive Disparities in Older Adults' Outdoor Walking?

PubMed

Zandieh, Razieh; Flacke, Johannes; Martinez, Javier; Jones, Phil; van Maarseveen, Martin

2017-07-07

Older residents of high-deprivation areas walk less than those of low-deprivation areas. Previous research has shown that neighborhood built environment may support and encourage outdoor walking. The extent to which the built environment supports and encourages walking is called "walkability". This study examines inequalities in neighborhood walkability in high- versus low-deprivation areas and their possible influences on disparities in older adults' outdoor walking levels. For this purpose, it focuses on specific neighborhood built environment attributes (residential density, land-use mix and intensity, street connectivity, and retail density) relevant to neighborhood walkability. It applied a mixed-method approach, included 173 participants (≥65 years), and used a Geographic Information System (GIS) and walking interviews (with a sub-sample) to objectively and subjectively measure neighborhood built environment attributes. Outdoor walking levels were measured by using the Geographic Positioning System (GPS) technology. Data on personal characteristics was collected by completing a questionnaire. The results show that inequalities in certain land-use intensity (i.e., green spaces, recreation centers, schools and industries) in high- versus low-deprivation areas may influence disparities in older adults' outdoor walking levels. Modifying neighborhood land use intensity may help to encourage outdoor walking in high-deprivation areas.

From aggregative adsorption to surface depletion: Aqueous systems of C nE m amphiphiles at hydrophilic surfaces

DOE PAGES

Rother, Gernot; Müter, Dirk; Bock, Henry; ...

2017-03-27

Adsorption of a short-chain nonionic amphiphile (C 6E 3) at the surface of mesoporous silica glass (CPG-10) was studied by a combination of adsorption measurements and mesoscale simulations. Adsorption measurements covering a wide composition range of the C 6E 3 + water system show that no adsorption occurs up to the critical micelle concentration (cmc), at which a sharp increase of adsorption is observed that is attributed to ad-micelle formation at the pore walls. Intriguingly, as the concentration is increased further, the surface excess of the amphiphile begins to decrease and eventually becomes negative, which corresponds to preferential adsorption ofmore » water rather than amphiphile at high amphiphile concentrations. The existence of such a surface-azeotropic point has not previously been reported in the surfactant adsorption field. Dissipative particle dynamics (DPD) simulations were performed to reveal the structural origin of this transition from aggregative adsorption to surface depletion. Finally, the simulations indicate that this transition can be attributed to the repulsive interaction between head groups, causing amphiphilic depletion in the region around the corona of the surface micelles.« less

Research on efficiency evaluation model of integrated energy system based on hybrid multi-attribute decision-making.

PubMed

Li, Yan

2017-05-25

The efficiency evaluation model of integrated energy system, involving many influencing factors, and the attribute values are heterogeneous and non-deterministic, usually cannot give specific numerical or accurate probability distribution characteristics, making the final evaluation result deviation. According to the characteristics of the integrated energy system, a hybrid multi-attribute decision-making model is constructed. The evaluation model considers the decision maker's risk preference. In the evaluation of the efficiency of the integrated energy system, the evaluation value of some evaluation indexes is linguistic value, or the evaluation value of the evaluation experts is not consistent. These reasons lead to ambiguity in the decision information, usually in the form of uncertain linguistic values and numerical interval values. In this paper, the risk preference of decision maker is considered when constructing the evaluation model. Interval-valued multiple-attribute decision-making method and fuzzy linguistic multiple-attribute decision-making model are proposed. Finally, the mathematical model of efficiency evaluation of integrated energy system is constructed.

The Development and Validation of the Algebra Curriculum Based Measure: A Measure of Preschool Children's Sorting and Classifying Skills

ERIC Educational Resources Information Center

Maherally, Mohammad Iqbal

2014-01-01

The purpose of this study was to develop and validate an assessment tool entitled the Algebra Curriculum Based Measure (ACBM) with the intent of measuring preschool children's sorting and classifying skills based on one attribute (color, shape, and size) and two attributes (color and shape) simultaneously; and their ability to explain their…

Is the Speech Transmission Index (STI) a robust measure of sound system speech intelligibility performance?

NASA Astrophysics Data System (ADS)

Mapp, Peter

2002-11-01

Although RaSTI is a good indicator of the speech intelligibility capability of auditoria and similar spaces, during the past 2-3 years it has been shown that RaSTI is not a robust predictor of sound system intelligibility performance. Instead, it is now recommended, within both national and international codes and standards, that full STI measurement and analysis be employed. However, new research is reported, that indicates that STI is not as flawless, nor robust as many believe. The paper highlights a number of potential error mechanisms. It is shown that the measurement technique and signal excitation stimulus can have a significant effect on the overall result and accuracy, particularly where DSP-based equipment is employed. It is also shown that in its current state of development, STI is not capable of appropriately accounting for a number of fundamental speech and system attributes, including typical sound system frequency response variations and anomalies. This is particularly shown to be the case when a system is operating under reverberant conditions. Comparisons between actual system measurements and corresponding word score data are reported where errors of up to 50 implications for VA and PA system performance verification will be discussed.

Quality of protection evaluation of security mechanisms.

PubMed

Ksiezopolski, Bogdan; Zurek, Tomasz; Mokkas, Michail

2014-01-01

Recent research indicates that during the design of teleinformatic system the tradeoff between the systems performance and the system protection should be made. The traditional approach assumes that the best way is to apply the strongest possible security measures. Unfortunately, the overestimation of security measures can lead to the unreasonable increase of system load. This is especially important in multimedia systems where the performance has critical character. In many cases determination of the required level of protection and adjustment of some security measures to these requirements increase system efficiency. Such an approach is achieved by means of the quality of protection models where the security measures are evaluated according to their influence on the system security. In the paper, we propose a model for QoP evaluation of security mechanisms. Owing to this model, one can quantify the influence of particular security mechanisms on ensuring security attributes. The methodology of our model preparation is described and based on it the case study analysis is presented. We support our method by the tool where the models can be defined and QoP evaluation can be performed. Finally, we have modelled TLS cryptographic protocol and presented the QoP security mechanisms evaluation for the selected versions of this protocol.

Psychological Attributes in Foreign Language Reading: An Explorative Study of Japanese College Students

ERIC Educational Resources Information Center

Mikami, Hitoshi; Leung, Chi Yui; Yoshikawa, Lisa

2016-01-01

This study explores the internal structure of psychological attributes (i.e., motivation, belief and emotion) related to foreign language reading (FLR) (hereafter FLR attributes) and checks the utility of existing FLR attribute measurements for the specific learner group (i.e., Japanese university students studying English as their foreign…

The Quality Function Measure: reliability and discriminant validity of a new measure of quality of gross motor movement in ambulatory children with cerebral palsy.

PubMed

Wright, F Virginia; Rosenbaum, Peter; Fehlings, Darcy; Mesterman, Ronit; Breuer, Ute; Kim, Marie

2014-08-01

Optimizing movement quality is a common rehabilitation goal for children with cerebral palsy (CP). The new Quality Function Measure (QFM)--a revision of the Gross Motor Performance Measure (GMPM)--evaluates five attributes: Alignment, Co-ordination, Dissociated movement, Stability, and Weight-shift, for the Gross Motor Function Measure (GMFM) Stand and Walk/Run/Jump items. This study evaluated the reliability and discriminant validity of the QFM. Thirty-three children with CP (17 females, 16 males; mean age 8y 11mo, SD 3y 1mo; Gross Motor Function Classification System [GMFCS] levels I [n=17], II [n=7], III [n=9]) participated in reliability testing. Each did a GMFM Stand/Walk assessment, repeated 2 weeks later. Both GMFM assessments were videotaped. A physiotherapist assessor pair independently scored the QFM from an assigned child's GMFM video. GMFM data from 112 children. That is, (GMFCS I [n=38], II [n=27], III [n=47]) were used for discriminant validity evaluation. QFM mean scores varied from 45.0% (SD 27.2; Stability) to 56.2% (SD 27.5; Alignment). Reliability was excellent across all attributes: intraclass correlation coefficients (ICCs) ≥0.97 (95% confidence intervals [CI] 0.95-0.99), interrater ICCs ≥0.89 (95% CI 0.80-0.98), and test-retest ICCs ≥0.90 (95% CI 0.79-0.99). QFM discriminated qualitative attributes of motor function among GMFCS levels (maximum p<0.05). The QFM is reliable and valid, making it possible to assess how well young people with CP move and what areas of function to target to enhance quality of motor control. © 2014 Mac Keith Press.

Developing critical consciousness or justifying the system? A qualitative analysis of attributions for poverty and wealth among low-income racial/ethnic minority and immigrant women

PubMed Central

Godfrey, Erin B.; Wolf, Sharon

2015-01-01

Objectives Economic inequality is a growing concern in the United States and globally. The current study uses qualitative techniques to (1) explore the attributions low-income racial/ethnic minority and immigrant women make for poverty and wealth in the U.S., and (2) clarify important links between attributions, critical consciousness development and system justification theory. Methods In-depth interview transcripts from 19 low-income immigrant Dominican and Mexican and native African-American mothers in a large Northeastern city were analyzed using open coding techniques. Interview topics included perceptions of current economic inequality and mobility and experiences of daily economic hardships. Results Almost all respondents attributed economic inequality to individual factors (character flaws, lack of hard work). Structural explanations for poverty and wealth were expressed by less than half the sample and almost always paired with individual explanations. Moreover, individual attributions included system-justifying beliefs such as the belief in meritocracy and equality of opportunity and structural attributions represented varying levels of critical consciousness. Conclusions Our analysis sheds new light on how and why individuals simultaneously hold individual and structural attributions and highlights key links between system justification and critical consciousness. It shows that critical consciousness and system justification do not represent opposite stances along a single underlying continuum, but are distinct belief systems and motivations. It also suggests that the motive to justify the system is a key psychological process impeding the development of critical consciousness. Implications for scholarship and intervention are discussed. PMID:25915116

Developing critical consciousness or justifying the system? A qualitative analysis of attributions for poverty and wealth among low-income racial/ethnic minority and immigrant women.

PubMed

Godfrey, Erin B; Wolf, Sharon

2016-01-01

Economic inequality is a growing concern in the United States and globally. The current study uses qualitative techniques to (a) explore the attributions low-income racial/ethnic minority and immigrant women make for poverty and wealth in the U.S., and (b) clarify important links between attributions, critical consciousness development, and system justification theory. In-depth interview transcripts from 19 low-income immigrant Dominican and Mexican and native African American mothers in a large Northeastern city were analyzed using open coding techniques. Interview topics included perceptions of current economic inequality and mobility and experiences of daily economic hardships. Almost all respondents attributed economic inequality to individual factors (character flaws, lack of hard work). Structural explanations for poverty and wealth were expressed by fewer than half the sample and almost always paired with individual explanations. Moreover, individual attributions included system-justifying beliefs such as the belief in meritocracy and equality of opportunity and structural attributions represented varying levels of critical consciousness. Our analysis sheds new light on how and why individuals simultaneously hold individual and structural attributions and highlights key links between system justification and critical consciousness. It shows that critical consciousness and system justification do not represent opposite stances along a single underlying continuum, but are distinct belief systems and motivations. It also suggests that the motive to justify the system is a key psychological process impeding the development of critical consciousness. Implications for scholarship and intervention are discussed. (c) 2016 APA, all rights reserved).

Attributing Agency to Automated Systems: Reflections on Human-Robot Collaborations and Responsibility-Loci.

PubMed

Nyholm, Sven

2017-07-18

Many ethicists writing about automated systems (e.g. self-driving cars and autonomous weapons systems) attribute agency to these systems. Not only that; they seemingly attribute an autonomous or independent form of agency to these machines. This leads some ethicists to worry about responsibility-gaps and retribution-gaps in cases where automated systems harm or kill human beings. In this paper, I consider what sorts of agency it makes sense to attribute to most current forms of automated systems, in particular automated cars and military robots. I argue that whereas it indeed makes sense to attribute different forms of fairly sophisticated agency to these machines, we ought not to regard them as acting on their own, independently of any human beings. Rather, the right way to understand the agency exercised by these machines is in terms of human-robot collaborations, where the humans involved initiate, supervise, and manage the agency of their robotic collaborators. This means, I argue, that there is much less room for justified worries about responsibility-gaps and retribution-gaps than many ethicists think.

Nuclear field shift in natural environments

NASA Astrophysics Data System (ADS)

Moynier, Frédéric; Fujii, Toshiyuki; Brennecka, Gregory A.; Nielsen, Sune G.

2013-03-01

The nuclear field shift (NFS) is an isotope shift in atomic energy levels caused by a combination of differences in nuclear size and shape and electron densities at the nucleus. The effect of NFS in isotope fractionation was theoretically established by Bigeleisen in 1996 [Bigeleisen J. (1996) J. Am. Chem. Soc. 118:3676-3680] and has been analytically measured in laboratory chemical exchange reactions. More recently, some isotopic variations of heavy elements (Hg, Tl, U) measured in natural systems as well as isotopic anomalies measured for lower-mass elements in meteorites have been attributed to the NFS effect. These isotopic variations open up new and exciting fields of investigations in Earth sciences. In this paper, we review the different natural systems in which NFS has been proposed to be the origin of isotopic variations.

Income inequality and alcohol attributable harm in Australia.

PubMed

Dietze, Paul M; Jolley, Damien J; Chikritzhs, Tanya N; Clemens, Susan; Catalano, Paul; Stockwell, Tim

2009-02-25

There is little research on the relationship between key socioeconomic variables and alcohol related harms in Australia. The aim of this research was to examine the relationship between income inequality and the rates of alcohol-attributable hospitalisation and death at a local-area level in Australia. We conducted a cross sectional ecological analysis at a Local Government Area (LGA) level of associations between data on alcohol caused harms and income inequality data after adjusting for socioeconomic disadvantage and remoteness of LGAs.The main outcome measures used were matched rate ratios for four measures of alcohol caused harm; acute (primarily related to the short term consequences of drinking) and chronic (primarily related to the long term consequences of drinking) alcohol-attributable hospitalisation and acute and chronic alcohol-attributable death. Matching was undertaken using control conditions (non-alcohol-attributable) at an LGA level. A total of 885 alcohol-attributable deaths and 19467 alcohol-attributable hospitalisations across all LGAs were available for analysis. After weighting by the total number of cases in each LGA, the matched rate ratios of acute and chronic alcohol-attributable hospitalisation and chronic alcohol-attributable death were associated with the squared centred Gini coefficients of LGAs. This relationship was evident after adjusting for socioeconomic disadvantage and remoteness of LGAs. For both measures of hospitalisation the relationship was curvilinear; increases in income inequality were initially associated with declining rates of hospitalisation followed by large increases as the Gini coefficient increased beyond 0.15. The pattern for chronic alcohol-attributable death was similar, but without the initial decrease. There was no association between income inequality and acute alcohol-attributable death, probably due to the relatively small number of these types of death. We found a curvilinear relationship between income inequality and the rates of some types of alcohol-attributable hospitalisation and death at a local area level in Australia. While alcohol-attributable harms generally increased with increasing income inequality, alcohol-attributable hospitalisations actually showed the reverse relationship at low levels of income inequality. The curvilinear patterns we observed are inconsistent with monotonic trends found in previous research making our findings incompatible with previous explanations of the relationship between income inequality and health related harms.

Reuse Metrics for Object Oriented Software

NASA Technical Reports Server (NTRS)

Bieman, James M.

1998-01-01

One way to increase the quality of software products and the productivity of software development is to reuse existing software components when building new software systems. In order to monitor improvements in reuse, the level of reuse must be measured. In this NASA supported project we (1) derived a suite of metrics which quantify reuse attributes for object oriented, object based, and procedural software, (2) designed prototype tools to take these measurements in Ada, C++, Java, and C software, (3) evaluated the reuse in available software, (4) analyzed the relationship between coupling, cohesion, inheritance, and reuse, (5) collected object oriented software systems for our empirical analyses, and (6) developed quantitative criteria and methods for restructuring software to improve reusability.

Value Modeling for Enterprise Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Dale L.; Lancaster, Mary J.

2015-10-20

Abstract. The idea that resilience is a tangible, measureable, and desirable system attribute has grown rapidly over the last decade beyond is origins in explaining ecological, physiological, psychological, and social systems. Operational enterprise resilience requires two types of measurement. First, the system must monitor various operational conditions in order to respond to disruptions. These measurements are part of one or more observation, orientation, decision, and action (OODA) loops The OODA control processes that implement a resilience strategy use these measurements to provide robustness, rapid recovery and reconstitution. In order to assess the effectiveness of the resilience strategy, a different classmore » of measurements is necessary. This second type consists of measurements about how well the OODA processes cover critical enterprise functions and the hazards to which the enterprise is exposed. They allow assessment of how well enterprise management processes anticipate, mitigate, and adapt to a changing environment and the degree to which the system is fault tolerant. This paper nominates a theoretical framework, in the form of definitions, a model, and a syntax, that accounts for this important distinction, and in so doing provides a mechanism for bridging resilience management process models and the many proposed cyber-defense metric enumerations.« less

Review on recent research progress on laser power measurement based on light pressure

NASA Astrophysics Data System (ADS)

Lai, WenChang; Zhou, Pu

2018-03-01

Accurate measuring the laser power is one of the most important issue to evaluate the performance of high power laser. For the time being, most of the demonstrated technique could be attributed to direct measuring route. Indirect measuring laser power based on light pressure, which has been under intensive investigation, has the advantages such as fast response, real-time measuring and high accuracy, compared with direct measuring route. In this paper, we will review several non-traditional methods based on light pressure to precisely measure the laser power proposed recently. The system setup, measuring principle and scaling methods would be introduced and analyzed in detail. We also compare the benefit and the drawback of these methods and analyze the uncertainties of the measurements.

Neighborhood environment and physical activity among older adults: do the relationships differ by driving status?

PubMed

Ding, Ding; Sallis, James F; Norman, Gregory J; Frank, Lawrence D; Saelens, Brian E; Kerr, Jacqueline; Conway, Terry L; Cain, Kelli; Hovell, Melbourne F; Hofstetter, C Richard; King, Abby C

2014-07-01

Some attributes of neighborhood environments are associated with physical activity among older adults. This study examined whether the associations were moderated by driving status. Older adults from neighborhoods differing in walkability and income completed written surveys and wore accelerometers (N = 880, mean age = 75 years, 56% women). Neighborhood environments were measured by geographic information systems and validated questionnaires. Driving status was defined on the basis of a driver's license, car ownership, and feeling comfortable to drive. Outcome variables included accelerometer-based physical activity and self-reported transport and leisure walking. Multilevel generalized linear regression was used. There was no significant Neighborhood Attribute × Driving Status interaction with objective physical activity or reported transport walking. For leisure walking, almost all environmental attributes were positive and significant among driving older adults but not among nondriving older adults (five significant interactions at p < .05). The findings suggest that driving status is likely to moderate the association between neighborhood environments and older adults' leisure walking.

Visual Attention Allocation Between Robotic Arm and Environmental Process Control: Validating the STOM Task Switching Model

NASA Technical Reports Server (NTRS)

Wickens, Christopher; Vieanne, Alex; Clegg, Benjamin; Sebok, Angelia; Janes, Jessica

2015-01-01

Fifty six participants time shared a spacecraft environmental control system task with a realistic space robotic arm control task in either a manual or highly automated version. The former could suffer minor failures, whose diagnosis and repair were supported by a decision aid. At the end of the experiment this decision aid unexpectedly failed. We measured visual attention allocation and switching between the two tasks, in each of the eight conditions formed by manual-automated arm X expected-unexpected failure X monitoring- failure management. We also used our multi-attribute task switching model, based on task attributes of priority interest, difficulty and salience that were self-rated by participants, to predict allocation. An un-weighted model based on attributes of difficulty, interest and salience accounted for 96 percent of the task allocation variance across the 8 different conditions. Task difficulty served as an attractor, with more difficult tasks increasing the tendency to stay on task.

Getting off on the Wrong Foot: Longitudinal Effects of Hispanic Students' Stability Attributions Following Poor Initial Test Performance

ERIC Educational Resources Information Center

Cox, Cody B.; Yang, Yan

2012-01-01

Though studies have established that following poor performance, attributions to stable causes affect the performance of minority students, few studies have explored the impact of stability attributions over time. This study explored attributions following initial failure among a predominantly Hispanic student population. We measured students'…

An integrated data-analysis and database system for AMS 14C

NASA Astrophysics Data System (ADS)

Kjeldsen, Henrik; Olsen, Jesper; Heinemeier, Jan

2010-04-01

AMSdata is the name of a combined database and data-analysis system for AMS 14C and stable-isotope work that has been developed at Aarhus University. The system (1) contains routines for data analysis of AMS and MS data, (2) allows a flexible and accurate description of sample extraction and pretreatment, also when samples are split into several fractions, and (3) keeps track of all measured, calculated and attributed data. The structure of the database is flexible and allows an unlimited number of measurement and pretreatment procedures. The AMS 14C data analysis routine is fairly advanced and flexible, and it can be easily optimized for different kinds of measuring processes. Technically, the system is based on a Microsoft SQL server and includes stored SQL procedures for the data analysis. Microsoft Office Access is used for the (graphical) user interface, and in addition Excel, Word and Origin are exploited for input and output of data, e.g. for plotting data during data analysis.

Decision Making In Assignment Problem With Multiple Attributes Under Intuitionistic Fuzzy Environment

NASA Astrophysics Data System (ADS)

Mukherjee, Sathi; Basu, Kajla

2010-10-01

In this paper we develop a methodology to solve the multiple attribute assignment problems where the attributes are considered to be Intuitionistic Fuzzy Sets (IFS). We apply the concept of similarity measures of IFS to solve the Intuitionistic Fuzzy Multi-Attribute Assignment Problem (IFMAAP). The weights of the attributes are determined from expert opinion. An illustrative example is solved to verify the developed approach and to demonstrate its practicality.

Is it advisable to include negative attributes to assess the stereotype content? Yes, but only in the morality dimension.

PubMed

Sayans-Jiménez, Pablo; Rojas Tejada, Antonio José; Cuadrado Guirado, Isabel

2017-04-01

Competence, morality and sociability dimensions have shown to be essential to measure stereotypes. Theoretically, the attributes associated with the negative pole of morality are more reliable and have shown to have higher evaluative weight. However, the current research usually employs only positive attributes to measure each dimension. Since the advantages of the inclusion of negative morality are clear it would be interesting to know about the effects of the inclusion of such type of attributes (i.e., it is good or bad for the measurement). The purpose of this study is to examine if the addition of negative items makes possible to improve the stereotype content measures. This study compares the differences between scales with various compositions of positive and negative items of stereotypes to predict three related variables: anger, fear and a semantic differential of evaluation. The study was carried out with a sample of 550 Spaniards. The data found highlights the importance of using attributes of the negative pole of morality in studying stereotypes. Their use was able to explain the intergroup emotional responses and the semantic differential more efficiently. © 2017 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Diseases Burden of Chronic Obstructive Pulmonary Disease (COPD) Attributable to Ground-Level Ozone in Thailand: Estimates Based on Surface Monitoring Measurements Data.

PubMed

Pinichka, Chayut; Bundhamcharoen, Kanitta; Shibuya, Kenji

2015-05-14

Ambient ozone (O3) pollution has increased globally since preindustrial times. At present, O3 is one of the major air pollution concerns in Thailand, and is associated with health impacts such as chronic obstructive pulmonary disease (COPD). The objective of our study is to estimate the burden of disease attributed to O3 in 2009 in Thailand based on empirical evidence. We estimated disability-adjusted life years (DALYs) attributable to O3 using the comparative risk assessment framework in the Global Burden of Diseases (GBD) study. We quantified the population attributable fraction (PAF), integrated from Geographic Information Systems (GIS)-based spatial interpolation, the population distribution of exposure, and the exposure-response coefficient to spatially characterize exposure to ambient O3 pollution on a national scale. Exposure distribution was derived from GIS-based spatial interpolation O3 exposure model using Pollution Control Department Thailand (PCD) surface air pollution monitor network sources. Relative risk (RR) and population attributable fraction (PAF) were determined using health impact function estimates for O3. PAF (%) of COPD attributable to O3 were determined by region: at approximately, Northern=2.1, Northeastern=7.1, Central=9.6, Eastern=1.75, Western=1.47 and Southern=1.74. The total COPD burden attributable to O3 for Thailand in 2009 was 61,577 DALYs. Approximately 0.6% of the total DALYs in Thailand is male: 48,480 DALYs; and female: 13,097 DALYs. This study provides the first empirical evidence on the health burden (DALYs) attributable to O3 pollution in Thailand. Varying across regions, the disease burden attributable to O3 was 0.6% of the total national burden in 2009. Better empirical data on local specific sites, e.g. urban and rural areas, alternative exposure assessment, e.g. land use regression (LUR), and a local concentration-response coefficient are required for future studies in Thailand.

Quality Attributes for Mission Flight Software: A Reference for Architects

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan; Fesq, Lorraine; Dvorak, Dan

2016-01-01

In the international standards for architecture descriptions in systems and software engineering (ISO/IEC/IEEE 42010), "concern" is a primary concept that often manifests itself in relation to the quality attributes or "ilities" that a system is expected to exhibit - qualities such as reliability, security and modifiability. One of the main uses of an architecture description is to serve as a basis for analyzing how well the architecture achieves its quality attributes, and that requires architects to be as precise as possible about what they mean in claiming, for example, that an architecture supports "modifiability." This paper describes a table, generated by NASA's Software Architecture Review Board, which lists fourteen key quality attributes, identifies different important aspects of each quality attribute and considers each aspect in terms of requirements, rationale, evidence, and tactics to achieve the aspect. This quality attribute table is intended to serve as a guide to software architects, software developers, and software architecture reviewers in the domain of mission-critical real-time embedded systems, such as space mission flight software.

42 CFR 414.1235 - Cost measures.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Total per capita costs for all attributed beneficiaries with coronary artery disease. (4) Total per capita costs for all attributed beneficiaries with chronic obstructive pulmonary disease. (5) Total per capita costs for all attributed beneficiaries with heart failure. (6) Medicare Spending per Beneficiary...

Sharp Eccentric Rings in Planetless Hydrodynamical Models of Debris Disks

NASA Technical Reports Server (NTRS)

Lyra, W.; Kuchner, M. J.

2013-01-01

Exoplanets are often associated with disks of dust and debris, analogs of the Kuiper Belt in our solar system. These "debris disks" show a variety of non-trivial structures attributed to planetary perturbations and utilized to constrain the properties of the planets. However, analyses of these systems have largely ignored the fact that, increasingly, debris disks are found to contain small quantities of gas, a component all debris disks should contain at some level. Several debris disks have been measured with a dust-to-gas ratio around unity where the effect of hydrodynamics on the structure of the disk cannot be ignored. Here we report that dust-gas interactions can produce some of the key patterns seen in debris disks that were previously attributed to planets. Through linear and nonlinear modeling of the hydrodynamical problem, we find that a robust clumping instability exists in this configuration, organizing the dust into narrow, eccentric rings, similar to the Fomalhaut debris disk. The hypothesis that these disks might contain planets, though thrilling, is not necessarily required to explain these systems.

Generation And Understanding Of Natural Language Using Information In A Frame Structure

NASA Astrophysics Data System (ADS)

Perkins, Walton A.

1989-03-01

Many expert systems and relational database systems store factual information in the form of attributes values of objects. Problems arise in transforming from that attribute (frame) database representation into English surface structure and in transforming the English surface structure into a representation that references information in the frame database. In this paper we consider mainly the generation process, as it is this area in which we have made the most significant progress. In its interaction with the user, the expert system must generate questions, declarations, and uncertain declarations. Attributes such as COLOR, LENGTH, and ILLUMINATION can be referenced using the template: " of " for both questions and declarations. However, many other attributes, such as RATTLES, in "What is RATTLES of the light bulb?", and HAS_STREP_THROAT in, "HAS_STREP_THROAT of Dan is true." do not fit this template. We examined over 300 attributes from several knowledge bases and have grouped them into 16 classes. For each class there is one "question" template, one "declaration" template, and one "uncertain declaration" template for generating English surface structure. The internal databases identifiers (e.g., HAS_STREP_THROAT and DISEASE_35) must also be replaced by output synonyms. Classifying each attribute in combination with synonym translation remarkably improved the English surface structure that the system generated. In the area of understanding, synonym translation and knowledge of the attribute properties, such as legal values, has resulted in a robust database query capability.

Microfluidic and nanofluidic phase behaviour characterization for industrial CO2, oil and gas.

PubMed

Bao, Bo; Riordon, Jason; Mostowfi, Farshid; Sinton, David

2017-08-08

Microfluidic systems that leverage unique micro-scale phenomena have been developed to provide rapid, accurate and robust analysis, predominantly for biomedical applications. These attributes, in addition to the ability to access high temperatures and pressures, have motivated recent expanded applications in phase measurements relevant to industrial CO 2 , oil and gas applications. We here present a comprehensive review of this exciting new field, separating microfluidic and nanofluidic approaches. Microfluidics is practical, and provides similar phase properties analysis to established bulk methods with advantages in speed, control and sample size. Nanofluidic phase behaviour can deviate from bulk measurements, which is of particular relevance to emerging unconventional oil and gas production from nanoporous shale. In short, microfluidics offers a practical, compelling replacement of current bulk phase measurement systems, whereas nanofluidics is not practical, but uniquely provides insight into phase change phenomena at nanoscales. Challenges, trends and opportunities for phase measurements at both scales are highlighted.

Remote sensing of ecosystem health: opportunities, challenges, and future perspectives.

PubMed

Li, Zhaoqin; Xu, Dandan; Guo, Xulin

2014-11-07

Maintaining a healthy ecosystem is essential for maximizing sustainable ecological services of the best quality to human beings. Ecological and conservation research has provided a strong scientific background on identifying ecological health indicators and correspondingly making effective conservation plans. At the same time, ecologists have asserted a strong need for spatially explicit and temporally effective ecosystem health assessments based on remote sensing data. Currently, remote sensing of ecosystem health is only based on one ecosystem attribute: vigor, organization, or resilience. However, an effective ecosystem health assessment should be a comprehensive and dynamic measurement of the three attributes. This paper reviews opportunities of remote sensing, including optical, radar, and LiDAR, for directly estimating indicators of the three ecosystem attributes, discusses the main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system, and provides some future perspectives. The main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system are: (1) scale issue; (2) transportability issue; (3) data availability; and (4) uncertainties in health indicators estimated from remote sensing data. However, the Radarsat-2 constellation, upcoming new optical sensors on Worldview-3 and Sentinel-2 satellites, and improved technologies for the acquisition and processing of hyperspectral, multi-angle optical, radar, and LiDAR data and multi-sensoral data fusion may partly address the current challenges.

The effect of subjective awareness measures on performance in artificial grammar learning task.

PubMed

Ivanchei, Ivan I; Moroshkina, Nadezhda V

2018-01-01

Systematic research into implicit learning requires well-developed awareness-measurement techniques. Recently, trial-by-trial measures have been widely used. However, they can increase complexity of a study because they are an additional experimental variable. We tested the effects of these measures on performance in artificial grammar learning study. Four groups of participants were assigned to different awareness measures conditions: confidence ratings, post-decision wagering, decision strategy attribution or none. Decision-strategy-attribution participants demonstrated better grammar learning and longer response times compared to controls. They also exhibited a conservative bias. Grammaticality by itself was a stronger predictor of strings endorsement in decision-strategy-attribution group compared to other groups. Confidence ratings and post-decision wagering only affected the response times. These results were supported by an additional experiment that used a balanced chunk strength design. We conclude that a decision-strategy-attribution procedure may force participants to adopt an analytical decision-making strategy and rely mostly on conscious knowledge of artificial grammar. Copyright © 2017 Elsevier Inc. All rights reserved.

A longitudinal analysis of nursing home outcomes.

PubMed

Porell, F; Caro, F G; Silva, A; Monane, M

1998-10-01

To investigate resident and facility attributes associated with long-term care health outcomes in nursing homes. Quarterly Management Minutes Questionnaire (MMQ) survey data for Medicaid case-mix reimbursement of nursing homes in Massachusetts from 1991 to 1994, for specification of outcomes and resident attributes. Facility attributes are specified from cost report data. Multivariate logistic and "state-dependence" regression models are estimated for survival, ADL functional status, incontinence status, and mental status outcomes from longitudinal residence histories of Medicaid residents spanning 3 to 36 months in length. Outcomes are specified to be a function of resident demographic and diagnostic attributes and facility-level operating and nurse staffing attributes. The estimated parameters for resident demographic and diagnostic attributes showed a great deal of construct validity with respect to clinical expectations regarding risk factors for adverse outcomes. Few facility attributes were associated with outcomes generally, and none was significantly associated with all four outcomes. The absence of uniform associations between facility attributes and the various long-term care health outcomes studied suggests that strong facility performance on one health outcome may coexist with much weaker performance on other outcomes. This has implications for the aggregation of individual facility performance measures on multiple outcomes and the development of overall outcome performance measures.

Predicting Aggressive Tendencies by Visual Attention Bias Associated with Hostile Emotions

PubMed Central

Lin, Ping-I; Hsieh, Cheng-Da; Juan, Chi-Hung; Hossain, Md Monir; Erickson, Craig A.; Lee, Yang-Han; Su, Mu-Chun

2016-01-01

The goal of the current study is to clarify the relationship between social information processing (e.g., visual attention to cues of hostility, hostility attribution bias, and facial expression emotion labeling) and aggressive tendencies. Thirty adults were recruited in the eye-tracking study that measured various components in social information processing. Baseline aggressive tendencies were measured using the Buss-Perry Aggression Questionnaire (AQ). Visual attention towards hostile objects was measured as the proportion of eye gaze fixation duration on cues of hostility. Hostility attribution bias was measured with the rating results for emotions of characters in the images. The results show that the eye gaze duration on hostile characters was significantly inversely correlated with the AQ score and less eye contact with an angry face. The eye gaze duration on hostile object was not significantly associated with hostility attribution bias, although hostility attribution bias was significantly positively associated with the AQ score. Our findings suggest that eye gaze fixation time towards non-hostile cues may predict aggressive tendencies. PMID:26901770

Predicting Aggressive Tendencies by Visual Attention Bias Associated with Hostile Emotions.

PubMed

Lin, Ping-I; Hsieh, Cheng-Da; Juan, Chi-Hung; Hossain, Md Monir; Erickson, Craig A; Lee, Yang-Han; Su, Mu-Chun

2016-01-01

The goal of the current study is to clarify the relationship between social information processing (e.g., visual attention to cues of hostility, hostility attribution bias, and facial expression emotion labeling) and aggressive tendencies. Thirty adults were recruited in the eye-tracking study that measured various components in social information processing. Baseline aggressive tendencies were measured using the Buss-Perry Aggression Questionnaire (AQ). Visual attention towards hostile objects was measured as the proportion of eye gaze fixation duration on cues of hostility. Hostility attribution bias was measured with the rating results for emotions of characters in the images. The results show that the eye gaze duration on hostile characters was significantly inversely correlated with the AQ score and less eye contact with an angry face. The eye gaze duration on hostile object was not significantly associated with hostility attribution bias, although hostility attribution bias was significantly positively associated with the AQ score. Our findings suggest that eye gaze fixation time towards non-hostile cues may predict aggressive tendencies.

Alternative electrical distribution system architectures for automobiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Afridi, K.K.; Tabors, R.D.; Kassakian, J.G.

At present most automobiles use a 12 V electrical system with point-to-point wiring. The capability of this architecture in meeting the needs of future electrical loads is questionable. Furthermore, with the development of electric vehicles (EVs) there is a greater need for a better architecture. In this paper the authors outline the limitations of the conventional architecture and identify alternatives. They also present a multi-attribute trade-off methodology which compares these alternatives, and identifies a set of Pareto optimal architectures. The system attributes traded off are cost, weight, losses and probability of failure. These are calculated by a computer program thatmore » has built-in component attribute models. System attributes of a few dozen architectures are also reported and the results analyzed. 17 refs.« less

Parent Attributions of Ambiguous Symptoms in Their Children: A Preliminary Measure Validation in Parents of Children with Chronic Pain.

PubMed

Heathcote, Lauren C; Williams, Sara E; Smith, Allison M; Sieberg, Christine B; Simons, Laura E

2018-06-13

How parents attribute cause to their child’s physical symptoms is likely important in understanding how the parent responds to the child, as well as the child’s health outcomes, especially within the context of chronic illness. Here, we adapt the Symptom Interpretation Questionnaire for parent report (SIQ-PR) and provide preliminary validation in a sample of parents of children with chronic pain ( N = 311). Confirmatory factor analysis revealed that the SIQ-PR structure is consistent with the original measure, with three distinct attribution types: psychological (emotional/affective), somatic (illness/disease), and environmental (situational/transient) causes. All three subscales demonstrated satisfactory to good internal consistency, and temporal stability. Parents typically endorsed more than one attribution for each symptom, indicating that parents of children with chronic pain have a multidimensional interpretation of physical symptoms in their children. Further, parent psychological and somatic attributions, but not environmental attributions, were significantly associated with (i) parent protective responses towards their child, and (ii) the child’s self-reported somatic and psychological symptoms, indicating convergent and divergent validity. The SIQ-PR may be a useful measure for future studies investigating intergenerational and interpersonal models of pediatric chronic pain, and more broadly, to examine parent attributions of children’s ambiguous symptoms within the context of childhood chronic illness.

Quantifying multi-dimensional attributes of human activities at various geographic scales based on smartphone tracking.

PubMed

Zhou, Xiaolu; Li, Dongying

2018-05-09

Advancement in location-aware technologies, and information and communication technology in the past decades has furthered our knowledge of the interaction between human activities and the built environment. An increasing number of studies have collected data regarding individual activities to better understand how the environment shapes human behavior. Despite this growing interest, some challenges exist in collecting and processing individual's activity data, e.g., capturing people's precise environmental contexts and analyzing data at multiple spatial scales. In this study, we propose and implement an innovative system that integrates smartphone-based step tracking with an app and the sequential tile scan techniques to collect and process activity data. We apply the OpenStreetMap tile system to aggregate positioning points at various scales. We also propose duration, step and probability surfaces to quantify the multi-dimensional attributes of activities. Results show that, by running the app in the background, smartphones can measure multi-dimensional attributes of human activities, including space, duration, step, and location uncertainty at various spatial scales. By coordinating Global Positioning System (GPS) sensor with accelerometer sensor, this app can save battery which otherwise would be drained by GPS sensor quickly. Based on a test dataset, we were able to detect the recreational center and sports center as the space where the user was most active, among other places visited. The methods provide techniques to address key issues in analyzing human activity data. The system can support future studies on behavioral and health consequences related to individual's environmental exposure.

Farmers' Preferences for PES Contracts to Adopt Silvopastoral Systems in Southern Ecuador, Revealed Through a Choice Experiment

NASA Astrophysics Data System (ADS)

Raes, Leander; Speelman, Stijn; Aguirre, Nikolay

2017-08-01

This study investigates farmers' preferences to participate in payment contracts to adopt silvopastoral systems in Ecuador. A choice experiment was used to elicit preferences between different contract attributes, including differing payment amounts and land management requirements. The research was carried out in the buffer zone of Podocarpus National Park in Southern Ecuador, an area where most land is dedicated to cattle husbandry. A choice experiment was conducted to measure farmers' interest in different types of contracts. Based on existing incentive programs, contract choices varied with respect to the type of silvopastoral system, extra land-use requirements, payment levels and contract duration. In addition, contracts differed with regards to access by cattle to streams. Although the farmers did not show strong preferences for every contract attribute, the majority of farmers in the area showed interest in the proposed contracts. A latent class model identified three classes of respondents, based on their preferences for different contracts attributes or the "business as usual" option. The results suggest that farmland area, agricultural income, and landowners' perceptions of environmental problems provide a partial explanation for the heterogeneity observed in the choices for specific contracts. Participation might increase if contracts were targeted at specific groups of farmers, such as those identified through our latent class model. Offering flexible contracts with varying additional requirements within the same scheme, involving farmers from the start in payments for environmental services design, and combining payments for environmental services with integrated conservation and development projects may be a better way to convince more farmers to adopt silvopastoral systems.

Farmers' Preferences for PES Contracts to Adopt Silvopastoral Systems in Southern Ecuador, Revealed Through a Choice Experiment.

PubMed

Raes, Leander; Speelman, Stijn; Aguirre, Nikolay

2017-08-01

This study investigates farmers' preferences to participate in payment contracts to adopt silvopastoral systems in Ecuador. A choice experiment was used to elicit preferences between different contract attributes, including differing payment amounts and land management requirements. The research was carried out in the buffer zone of Podocarpus National Park in Southern Ecuador, an area where most land is dedicated to cattle husbandry. A choice experiment was conducted to measure farmers' interest in different types of contracts. Based on existing incentive programs, contract choices varied with respect to the type of silvopastoral system, extra land-use requirements, payment levels and contract duration. In addition, contracts differed with regards to access by cattle to streams. Although the farmers did not show strong preferences for every contract attribute, the majority of farmers in the area showed interest in the proposed contracts. A latent class model identified three classes of respondents, based on their preferences for different contracts attributes or the "business as usual" option. The results suggest that farmland area, agricultural income, and landowners' perceptions of environmental problems provide a partial explanation for the heterogeneity observed in the choices for specific contracts. Participation might increase if contracts were targeted at specific groups of farmers, such as those identified through our latent class model. Offering flexible contracts with varying additional requirements within the same scheme, involving farmers from the start in payments for environmental services design, and combining payments for environmental services with integrated conservation and development projects may be a better way to convince more farmers to adopt silvopastoral systems.

Trust-based information system architecture for personal wellness.

PubMed

Ruotsalainen, Pekka; Nykänen, Pirkko; Seppälä, Antto; Blobel, Bernd

2014-01-01

Modern eHealth, ubiquitous health and personal wellness systems take place in an unsecure and ubiquitous information space where no predefined trust occurs. This paper presents novel information model and an architecture for trust based privacy management of personal health and wellness information in ubiquitous environment. The architecture enables a person to calculate a dynamic and context-aware trust value for each service provider, and using it to design personal privacy policies for trustworthy use of health and wellness services. For trust calculation a novel set of measurable context-aware and health information-sensitive attributes is developed. The architecture enables a person to manage his or her privacy in ubiquitous environment by formulating context-aware and service provider specific policies. Focus groups and information modelling was used for developing a wellness information model. System analysis method based on sequential steps that enable to combine results of analysis of privacy and trust concerns and the selection of trust and privacy services was used for development of the information system architecture. Its services (e.g. trust calculation, decision support, policy management and policy binding services) and developed attributes enable a person to define situation-aware policies that regulate the way his or her wellness and health information is processed.

Calibrating Charisma: The many-facet Rasch model for leader measurement and automated coaching

NASA Astrophysics Data System (ADS)

Barney, Matt

2016-11-01

No one is a leader unless others follow. Consequently, leadership is fundamentally a social judgment construct, and may be best measured via a Many Facet Rasch Model designed for this purpose. Uniquely, the MFRM allows for objective, accurate and precise estimation of leader attributes, along with identification of rater biases and other distortions of the available information. This presentation will outline a mobile computer-adaptive measurement system that measures and develops charisma, among others. Uniquely, the approach calibrates and mass-personalizes artificially intelligent, Rasch-calibrated electronic coaching that is neither too hard nor too easy but “just right” to help each unique leader develop improved charisma.

Sensor Systems for Prognostics and Health Management

PubMed Central

Cheng, Shunfeng; Azarian, Michael H.; Pecht, Michael G.

2010-01-01

Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented. PMID:22219686

Sensor systems for prognostics and health management.

PubMed

Cheng, Shunfeng; Azarian, Michael H; Pecht, Michael G

2010-01-01

Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented.

Therapists' causal attributions of clients' problems and selection of intervention strategies.

PubMed

Royce, W S; Muehlke, C V

1991-04-01

Therapists' choices of intervention strategies are influenced by many factors, including judgments about the bases of clients' problems. To assess the relationships between such causal attributions and the selection of intervention strategies, 196 counselors, psychologists, and social workers responded to the written transcript of a client's interview by answering two questionnaires, a 1982 scale (Causal Dimension Scale by Russell) which measured causal attribution of the client's problem, and another which measured preference for emotional, rational, and active intervention strategies in dealing with the client, based on the 1979 E-R-A taxonomy of Frey and Raming. A significant relationship was found between the two sets of variables, with internal attributions linked to rational intervention strategies and stable attributions linked to active strategies. The results support Halleck's 1978 hypothesis that theories of psychotherapy tie interventions to etiological considerations.

Efficacy of monitoring the sensory taste characteristics in pomegranate juice with electronic tongue, and chemical measurements

USDA-ARS?s Scientific Manuscript database

In addition to flavor attributes, pomegranate juices have sweet, sour, bitter tastes, astringent, and toothetch feeling factors. Many factors influence tastes and feeling factors. Measuring these attributes without a sensory panel makes economic sense. This investigation compares descriptive sensory...

Digital Holographic Demonstration Systems by Stanford University and Siros Technologies

NASA Astrophysics Data System (ADS)

Hesselink, L.

Its useful capacity, transfer rate and access time measure the performance of a holographic data storage system (HDSS). Data should never be lost, requiring a corrected bit error rate (BER) of 10-12 to 10-15. To compete successfully in the large storage marketplace, an HDS drive should be cost-competitive with improved performance over other drives. The exception could be certain niche markets, where unique HDS attributes — all-solid-state implementation with extremely short access times or associative retrieval — are attractive or required.

PPO-ethanol system as wavelength shifter for the Cherenkov counting technique using a liquid scintillation counter

NASA Astrophysics Data System (ADS)

Takiue, Makoto; Fujii, Haruo; Ishikawa, Hiroaki

1984-12-01

2, 5-diphenyloxazole (PPO) has been proposed as a wavelength shifter for Cherenkov counting. Since PPO is not incorporated with water, we have introduced the fluor into water in the form of micelle using a PPO-ethanol system. This technique makes it possible to obtain a high Cherenkov counting efficiency under stable sample conditions, attributed to the proper spectrometric features of the PPO. The 32P Cherenkov counting efficiency (68.4%) obtained from this technique is large as that measured with a conventional Cherenkov technique.

Partial Measurements and the Realization of Quantum-Mechanical Counterfactuals

NASA Astrophysics Data System (ADS)

Paraoanu, G. S.

2011-07-01

We propose partial measurements as a conceptual tool to understand how to operate with counterfactual claims in quantum physics. Indeed, unlike standard von Neumann measurements, partial measurements can be reversed probabilistically. We first analyze the consequences of this rather unusual feature for the principle of superposition, for the complementarity principle, and for the issue of hidden variables. Then we move on to exploring non-local contexts, by reformulating the EPR paradox, the quantum teleportation experiment, and the entanglement-swapping protocol for the situation in which one uses partial measurements followed by their stochastic reversal. This leads to a number of counter-intuitive results, which are shown to be resolved if we give up the idea of attributing reality to the wavefunction of a single quantum system.

What can the national quality forum tell us about performance measurement in anesthesiology?

PubMed

Hyder, Joseph A; Niconchuk, Jonathan; Glance, Laurent G; Neuman, Mark D; Cima, Robert R; Dutton, Richard P; Nguyen, Louis L; Fleisher, Lee A; Bader, Angela M

2015-02-01

Anesthesiologists face increasing pressure to demonstrate the value of the care they provide, whether locally or nationally through public reporting and payor requirements. In this article, we describe the current state of performance measurement in anesthesia care at the national level and highlight gaps and opportunities in performance measurement for anesthesiologists. We evaluated all endorsed performance measures in the National Quality Forum (NQF), the clearinghouse for all federal performance measures, and classified all measures as follows: (1) anesthesia-specific; (2) surgery-specific; (3) jointly attributable; or (4) other. We used NQF-provided descriptors to characterize measures in terms of (1) structure, process, outcome, or efficiency; (2) patients, disease, and events targeted; (3) procedural specialty; (4) reporting eligibility; (5) measures stewards; and (6) timing in the care stream. Of the 637 endorsed performance measures, few (6, 1.0%) were anesthesia-specific. An additional 39 measures (6.1%) were surgery-specific, and 67 others (10.5%) were jointly attributable. "Anesthesia-specific" measures addressed preoperative antibiotic timing (n = 4), normothermia (n = 1), and protocol use for the placement of central venous catheter (n = 1). Jointly attributable measures included outcome measures (n = 49/67, 73.1%), which were weighted toward mortality alone (n = 24) and cardiac surgery (n = 14). Other jointly attributable measures addressed orthopedic surgery (n = 4), general surgical oncologic resections (n = 12), or nonspecified surgeries (n = 15), but none specifically addressed anesthesia care outside the operating room such as for endoscopy. Only 4 measures were eligible for value-based purchasing. No named anesthesiology professional groups were among measure stewards, but surgical professional groups (n = 33/67, 47%) were frequent measure stewards. Few NQF performance measures are specific to anesthesia practice, and none of these appears to demonstrate the value of anesthesia care or differentiate high-quality providers. To demonstrate their role in patient-centered, outcome-driven care, anesthesiologists may consider actively partnering in jointly attributable or team-based reporting. Future measures may incorporate surgical procedures not proportionally represented, as well as procedural and sedation care provided in nonoperating room settings.

An examination of the association between the 5-HTT promoter region polymorphism and depressogenic attributional styles in childhood

PubMed Central

Sheikh, Haroon I.; Hayden, Elizabeth P.; Singh, Shiva M.; Dougherty, Lea R.; Olino, Thomas M.; Durbin, C. Emily; Klein, Daniel N.

2008-01-01

Although a vast literature examining the role of attributional styles in depression has accumulated, the origins of such cognitions remain poorly understood. Investigators are increasingly interested in whether cognitive vulnerability to depression is linked to genetic variation. As a preliminary test of this hypothesis, we examined whether the serotonin transporter promoter polymorphism (5-HTTLPR) was associated with attributional styles in children. Thirty-eight children completed a self-report measure of attributional styles, the Child Attributional Style Questionnaire-Revised (CASQ-R). Children were also genotyped for the 5-HTTLPR polymorphism, including the single nucleotide polymorphism (SNP) rs25531 in the long allele of the 5-HTTLPR. The short alleles of the 5-HTTLPR and their putative functional equivalents were associated with increased levels of depressogenic attributions for negative events, as measured by the CASQ-R, lending support to the role of 5-HTTLPR polymorphisms in cognitive vulnerability to depression. PMID:19122845

System and method for statistically monitoring and analyzing sensed conditions

DOEpatents

Pebay, Philippe P [Livermore, CA; Brandt, James M [Dublin, CA; Gentile, Ann C [Dublin, CA; Marzouk, Youssef M [Oakland, CA; Hale, Darrian J [San Jose, CA; Thompson, David C [Livermore, CA

2011-01-04

A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

System and method for statistically monitoring and analyzing sensed conditions

DOEpatents

Pebay, Philippe P [Livermore, CA; Brandt, James M [Dublin, CA; Gentile, Ann C [Dublin, CA; Marzouk, Youssef M [Oakland, CA; Hale, Darrian J [San Jose, CA; Thompson, David C [Livermore, CA

2011-01-25

A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

System and method for statistically monitoring and analyzing sensed conditions

DOEpatents

Pebay, Philippe P [Livermore, CA; Brandt, James M. , Gentile; Ann C. , Marzouk; Youssef M. , Hale; Darrian J. , Thompson; David, C [Livermore, CA

2010-07-13

A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

Attribute and topology based change detection in a constellation of previously detected objects

DOEpatents

Paglieroni, David W.; Beer, Reginald N.

2016-01-19

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

[Financial impact of smoking on health systems in Latin America: A study of seven countries and extrapolation to the regional level].

PubMed

Pichon-Riviere, Andrés; Bardach, Ariel; Augustovski, Federico; Alcaraz, Andrea; Reynales-Shigematsu, Luz Myriam; Pinto, Márcia Teixeira; Castillo-Riquelme, Marianela; Torres, Esperanza Peña; Osorio, Diana Isabel; Huayanay, Leandro; Munarriz, César Loza; de Miera-Juárez, Belén Sáenz; Gallegos-Rivero, Verónica; Puente, Catherine De La; Navia-Bueno, María Del Pilar; Caporale, Joaquín

2016-10-01

Estimate smoking-attributable direct medical costs in Latin American health systems. A microsimulation model was used to quantify financial impact of cardiovascular and cerebrovascular disease, chronic obstructive pulmonary disease (COPD), pneumonia, lung cancer, and nine other neoplasms. A systematic search for epidemiological data and event costs was carried out. The model was calibrated and validated for Argentina, Bolivia, Brazil, Chile, Colombia, Mexico, and Peru, countries that account for 78% of Latin America's population; the results were then extrapolated to the regional level. Every year, smoking is responsible for 33 576 billion dollars in direct costs to health systems. This amounts to 0.7% of the region's gross domestic product (GDP) and 8.3% of its health budget. Cardiovascular disease, COPD, and cancer were responsible for 30.3%, 26.9%, and 23.7% of these expenditures, respectively. Smoking-attributable costs ranged from 0.4% (Mexico and Peru) to 0.9% (Chile) of GDP and from 5.2% (Brazil) to 12.7% (Bolivia) of health expenditures. In the region, tax revenues from cigarette sales barely cover 37% of smoking-attributable health expenditures (8.1% in Bolivia and 67.3% in Argentina). Smoking is responsible for a significant proportion of health spending in Latin America, and tax revenues from cigarette sales are far from covering it. The region's countries should seriously consider stronger measures, such as an increase in tobacco taxes.

Organizational Attributes Associated With Medicare ACO Quality Performance.

PubMed

Zhu, Xi; Mueller, Keith; Huang, Huang; Ullrich, Fred; Vaughn, Thomas; MacKinney, A Clinton

2018-05-08

To evaluate associations between geographic, structural, and service-provision attributes of Accountable Care Organizations (ACOs) participating in the Medicare Shared Savings Program (MSSP) and the ACOs' quality performance. We conducted cross-sectional and longitudinal analyses of ACO quality performance using data from the Centers for Medicare and Medicaid Services and additional sources. The sample included 322 and 385 MSSP ACOs that had successfully reported quality measures in 2014 and 2015, respectively. Results show that after adjusting for other organizational factors, rural ACOs' average quality score was comparable to that of ACOs serving other geographic categories. ACOs with hospital-system sponsorship, larger beneficiary panels, and higher posthospitalization follow-up rates achieved better quality performance. There is no significant difference in average quality performance between rural ACOs and other ACOs after adjusting for structural and service-provision factors. MSSP ACO quality performance is positively associated with hospital-system sponsorship, beneficiary panel size, and posthospitalization follow-up rate. © 2018 National Rural Health Association.

Trust Model for Protection of Personal Health Data in a Global Environment.

PubMed

Ruotsalainen, Pekka; Blobel, Bernd

2017-01-01

Successful health care, eHealth, digital health, and personal health systems increasingly take place in cross-jurisdictional, dynamic and risk-encumbered information space. They require rich amount of personal health information (PHI). Trust is and will be the cornerstone and prerequisite for successful health services. In global environments, trust cannot be expected as granted. In this paper, health service in the global environment is perceived as a meta-system, and a trust management model is developed to support it. The predefined trusting belief currently used in health care is not transferable to global environments. In the authors' model, the level of trust is dynamically calculated from measurable attributes. These attributes describe trust features of the service provider and its environment. The calculated trust value or profile can be used in defining the risk service user has to accept when disclosing PHI, and in definition of additional privacy and security safeguards before disclosing PHI and/or using services.

Galileo radio science investigations

NASA Technical Reports Server (NTRS)

Howard, H. T.; Eshleman, V. R.; Hinson, D. P.; Kliore, A. J.; Lindal, G. F.; Woo, R.; Bird, M. K.; Volland, H.; Edenhoffer, P.; Paetzold, M.

1992-01-01

Galileo radio-propagation experiments are based on measurements of absolute and differential propagation time delay, differential phase delay, Doppler shift, signal strength, and polarization. These measurements can be used to study: the atmospheric and ionospheric structure, constituents, and dynamics of Jupiter; the magnetic field of Jupiter; the diameter of Io, its ionospheric structure, and the distribution of plasma in the Io torus; the diameters of the other Galilean satellites, certain properties of their surfaces, and possibly their atmospheres and ionospheres; and the plasma dynamics and magnetic field of the solar corona. The spacecraft system provides linear rather than circular polarization on the S-band downlink signal, the capability to receive X-band uplink signals, and a differential downlink ranging mode. A highly-stable, dual-frequency, spacecraft radio system is developed that is suitable for simultaneous measurements of all the parameters normally attributed to radio waves.

A formulation of multidimensional growth models for the assessment and forecast of technology attributes

NASA Astrophysics Data System (ADS)

Danner, Travis W.

Developing technology systems requires all manner of investment---engineering talent, prototypes, test facilities, and more. Even for simple design problems the investment can be substantial; for complex technology systems, the development costs can be staggering. The profitability of a corporation in a technology-driven industry is crucially dependent on maximizing the effectiveness of research and development investment. Decision-makers charged with allocation of this investment are forced to choose between the further evolution of existing technologies and the pursuit of revolutionary technologies. At risk on the one hand is excessive investment in an evolutionary technology which has only limited availability for further improvement. On the other hand, the pursuit of a revolutionary technology may mean abandoning momentum and the potential for substantial evolutionary improvement resulting from the years of accumulated knowledge. The informed answer to this question, evolutionary or revolutionary, requires knowledge of the expected rate of improvement and the potential a technology offers for further improvement. This research is dedicated to formulating the assessment and forecasting tools necessary to acquire this knowledge. The same physical laws and principles that enable the development and improvement of specific technologies also limit the ultimate capability of those technologies. Researchers have long used this concept as the foundation for modeling technological advancement through extrapolation by analogy to biological growth models. These models are employed to depict technology development as it asymptotically approaches limits established by the fundamental principles on which the technological approach is based. This has proven an effective and accurate approach to modeling and forecasting simple single-attribute technologies. With increased system complexity and the introduction of multiple system objectives, however, the usefulness of this modeling technique begins to diminish. With the introduction of multiple objectives, researchers often abandon technology growth models for scoring models and technology frontiers. While both approaches possess advantages over current growth models for the assessment of multi-objective technologies, each lacks a necessary dimension for comprehensive technology assessment. By collapsing multiple system metrics into a single, non-intuitive technology measure, scoring models provide a succinct framework for multi-objective technology assessment and forecasting. Yet, with no consideration of physical limits, scoring models provide no insight as to the feasibility of a particular combination of system capabilities. They only indicate that a given combination of system capabilities yields a particular score. Conversely, technology frontiers are constructed with the distinct objective of providing insight into the feasibility of system capability combinations. Yet again, upper limits to overall system performance are ignored. Furthermore, the data required to forecast subsequent technology frontiers is often inhibitive. In an attempt to reincorporate the fundamental nature of technology advancement as bound by physical principles, researchers have sought to normalize multi-objective systems whereby the variability of a single system objective is eliminated as a result of changes in the remaining objectives. This drastically limits the applicability of the resulting technology model because it is only applicable for a single setting of all other system attributes. Attempts to maintain the interaction between the growth curves of each technical objective of a complex system have thus far been limited to qualitative and subjective consideration. This research proposes the formulation of multidimensional growth models as an approach to simulating the advancement of multi-objective technologies towards their upper limits. Multidimensional growth models were formulated by noticing and exploiting the correlation between technology growth models and technology frontiers. Both are frontiers in actuality. The technology growth curve is a frontier between capability levels of a single attribute and time, while a technology frontier is a frontier between the capability levels of two or more attributes. Multidimensional growth models are formulated by exploiting the mathematical significance of this correlation. The result is a model that can capture both the interaction between multiple system attributes and their expected rates of improvement over time. The fundamental nature of technology development is maintained, and interdependent growth curves are generated for each system metric with minimal data requirements. Being founded on the basic nature of technology advancement, relative to physical limits, the availability for further improvement can be determined for a single metric relative to other system measures of merit. A by-product of this modeling approach is a single n-dimensional technology frontier linking all n system attributes with time. This provides an environment capable of forecasting future system capability in the form of advancing technology frontiers. The ability of a multidimensional growth model to capture the expected improvement of a specific technological approach is dependent on accurately identifying the physical limitations to each pertinent attribute. This research investigates two potential approaches to identifying those physical limits, a physics-based approach and a regression-based approach. The regression-based approach has found limited acceptance among forecasters, although it does show potential for estimating upper limits with a specified degree of uncertainty. Forecasters have long favored physics-based approaches for establishing the upper limit to unidimensional growth models. The task of accurately identifying upper limits has become increasingly difficult with the extension of growth models into multiple dimensions. A lone researcher may be able to identify the physical limitation to a single attribute of a simple system; however, as system complexity and the number of attributes increases, the attention of researchers from multiple fields of study is required. Thus, limit identification is itself an area of research and development requiring some level of investment. Whether estimated by physics or regression-based approaches, predicted limits will always have some degree of uncertainty. This research takes the approach of quantifying the impact of that uncertainty on model forecasts rather than heavily endorsing a single technique to limit identification. In addition to formulating the multidimensional growth model, this research provides a systematic procedure for applying that model to specific technology architectures. Researchers and decision-makers are able to investigate the potential for additional improvement within that technology architecture and to estimate the expected cost of each incremental improvement relative to the cost of past improvements. In this manner, multidimensional growth models provide the necessary information to set reasonable program goals for the further evolution of a particular technological approach or to establish the need for revolutionary approaches in light of the constraining limits of conventional approaches.

An Exploratory Study of Residents' Perception of Place Image: The Case of Kavala.

PubMed

Stylidis, Dimitrios; Sit, Jason; Biran, Avital

2016-05-01

Studies on place image have predominantly focused on the tourists' destination image and have given limited attention to other stakeholders' perspectives. This study aims to address this gap by focusing on the notion of residents' place image, whereby it reviews existing literature on residents' place image in terms of whether common attributes can be identified, and examines the role of community-focused attributes in its measurement. Data collected from a sample of 481 Kavala residents (Greece) were subjected to exploratory and confirmatory factor analysis. The study reveals that the existing measurement tools have typically emphasized destination-focused attributes and neglected community-focused attributes. This study contributes to the residents' place image research by proposing a more holistic measurement, which consisted of four dimensions: physical appearance, community services, social environment, and entertainment opportunities. The study also offers practical insights for developing and promoting a tourist place while simultaneously enhancing its residents' quality of life.

An Exploratory Study of Residents’ Perception of Place Image

PubMed Central

Stylidis, Dimitrios; Sit, Jason; Biran, Avital

2014-01-01

Studies on place image have predominantly focused on the tourists’ destination image and have given limited attention to other stakeholders’ perspectives. This study aims to address this gap by focusing on the notion of residents’ place image, whereby it reviews existing literature on residents’ place image in terms of whether common attributes can be identified, and examines the role of community-focused attributes in its measurement. Data collected from a sample of 481 Kavala residents (Greece) were subjected to exploratory and confirmatory factor analysis. The study reveals that the existing measurement tools have typically emphasized destination-focused attributes and neglected community-focused attributes. This study contributes to the residents’ place image research by proposing a more holistic measurement, which consisted of four dimensions: physical appearance, community services, social environment, and entertainment opportunities. The study also offers practical insights for developing and promoting a tourist place while simultaneously enhancing its residents’ quality of life. PMID:29708109

Social Attribution in Children with High Functioning Autism and Asperger Syndrome: An Exploratory Study in the Chinese Setting

ERIC Educational Resources Information Center

Chan, Raymond C. K.; Hu, Zhou-yi; Cui, Ji-fang; Wang, Ya; McAlonan, Grainne M.

2011-01-01

The present study aimed to examine social attribution in children with high-functioning autism (HFA) and Asperger's syndrome (AS). A sample of 20 boys (9 with HFA and 11 with AS) and 20 age-matched controls were recruited for this study. All participated in two tasks measuring social attribution ability, the conventional Social Attribution Task…

Thermal power systems small power systems applications project. Decision analysis for evaluating and ranking small solar thermal power system technologies. Volume 1: A brief introduction to multiattribute decision analysis. [explanation of multiattribute decision analysis methods used in evaluating alternatives for small powered systems

NASA Technical Reports Server (NTRS)

Feinberg, A.; Miles, R. F., Jr.

1978-01-01

The principal concepts of the Keeney and Raiffa approach to multiattribute decision analysis are described. Topics discussed include the concepts of decision alternatives, outcomes, objectives, attributes and their states, attribute utility functions, and the necessary independence properties for the attribute states to be aggregated into a numerical representation of the preferences of the decision maker for the outcomes and decision alternatives.

Automatic Ability Attribution after Failure: A Dual Process View of Achievement Attribution

PubMed Central

Sakaki, Michiko; Murayama, Kou

2013-01-01

Causal attribution has been one of the most influential frameworks in the literature of achievement motivation, but previous studies considered achievement attribution as relatively deliberate and effortful processes. In the current study, we tested the hypothesis that people automatically attribute their achievement failure to their ability, but reduce the ability attribution in a controlled manner. To address this hypothesis, we measured participants’ causal attribution belief for their task failure either under the cognitive load (load condition) or with full attention (no-load condition). Across two studies, participants attributed task performance to their ability more in the load than in the no-load condition. The increased ability attribution under cognitive load further affected intrinsic motivation. These results indicate that cognitive resources available after feedback play crucial roles in determining causal attribution belief, as well as achievement motivations. PMID:23667576

Automatic ability attribution after failure: a dual process view of achievement attribution.

PubMed

Sakaki, Michiko; Murayama, Kou

2013-01-01

Causal attribution has been one of the most influential frameworks in the literature of achievement motivation, but previous studies considered achievement attribution as relatively deliberate and effortful processes. In the current study, we tested the hypothesis that people automatically attribute their achievement failure to their ability, but reduce the ability attribution in a controlled manner. To address this hypothesis, we measured participants' causal attribution belief for their task failure either under the cognitive load (load condition) or with full attention (no-load condition). Across two studies, participants attributed task performance to their ability more in the load than in the no-load condition. The increased ability attribution under cognitive load further affected intrinsic motivation. These results indicate that cognitive resources available after feedback play crucial roles in determining causal attribution belief, as well as achievement motivations.

Quality of Protection Evaluation of Security Mechanisms

PubMed Central

Ksiezopolski, Bogdan; Zurek, Tomasz; Mokkas, Michail

2014-01-01

Recent research indicates that during the design of teleinformatic system the tradeoff between the systems performance and the system protection should be made. The traditional approach assumes that the best way is to apply the strongest possible security measures. Unfortunately, the overestimation of security measures can lead to the unreasonable increase of system load. This is especially important in multimedia systems where the performance has critical character. In many cases determination of the required level of protection and adjustment of some security measures to these requirements increase system efficiency. Such an approach is achieved by means of the quality of protection models where the security measures are evaluated according to their influence on the system security. In the paper, we propose a model for QoP evaluation of security mechanisms. Owing to this model, one can quantify the influence of particular security mechanisms on ensuring security attributes. The methodology of our model preparation is described and based on it the case study analysis is presented. We support our method by the tool where the models can be defined and QoP evaluation can be performed. Finally, we have modelled TLS cryptographic protocol and presented the QoP security mechanisms evaluation for the selected versions of this protocol. PMID:25136683

Attributes and Behaviors of Performance-Centered Systems.

ERIC Educational Resources Information Center

Gery, Gloria

1995-01-01

Examines attributes, characteristics, and behaviors of performance-centered software packages that are emerging in the consumer software marketplace and compares them with large-scale systems software being designed by internal information systems staffs and vendors of large-scale software designed for financial, manufacturing, processing, and…

Manual for the Student Attributes Coding System.

ERIC Educational Resources Information Center

Brophy, Jere E.; And Others

The Student Attributes Coding System has been developed for gathering data about the personal characteristics and classroom behavior of elementary school students selected for observation because they engender predictable attitudes and expectations in their teachers. This system is designed to systematically record and categorize all interactions…

Measuring Environmental Quality in the Southern Appalachian Mountains

Treesearch

Linwood Pendleton; Brent Sohngen; Robert Mendelsohn; Thomas Holmes

1998-01-01

This study presents a method for valuing recreational environmental quality in the forests of the southeastern United States. The paper offers a method for choosing, measuring, and valuing forest attributes. Surveys and popular recreation literature are used to identify forest attributes that contribute to recreational quality. Standard ecological techniques are...

Evaluating Health Information Systems Using Ontologies.

PubMed

Eivazzadeh, Shahryar; Anderberg, Peter; Larsson, Tobias C; Fricker, Samuel A; Berglund, Johan

2016-06-16

There are several frameworks that attempt to address the challenges of evaluation of health information systems by offering models, methods, and guidelines about what to evaluate, how to evaluate, and how to report the evaluation results. Model-based evaluation frameworks usually suggest universally applicable evaluation aspects but do not consider case-specific aspects. On the other hand, evaluation frameworks that are case specific, by eliciting user requirements, limit their output to the evaluation aspects suggested by the users in the early phases of system development. In addition, these case-specific approaches extract different sets of evaluation aspects from each case, making it challenging to collectively compare, unify, or aggregate the evaluation of a set of heterogeneous health information systems. The aim of this paper is to find a method capable of suggesting evaluation aspects for a set of one or more health information systems-whether similar or heterogeneous-by organizing, unifying, and aggregating the quality attributes extracted from those systems and from an external evaluation framework. On the basis of the available literature in semantic networks and ontologies, a method (called Unified eValuation using Ontology; UVON) was developed that can organize, unify, and aggregate the quality attributes of several health information systems into a tree-style ontology structure. The method was extended to integrate its generated ontology with the evaluation aspects suggested by model-based evaluation frameworks. An approach was developed to extract evaluation aspects from the ontology that also considers evaluation case practicalities such as the maximum number of evaluation aspects to be measured or their required degree of specificity. The method was applied and tested in Future Internet Social and Technological Alignment Research (FI-STAR), a project of 7 cloud-based eHealth applications that were developed and deployed across European Union countries. The relevance of the evaluation aspects created by the UVON method for the FI-STAR project was validated by the corresponding stakeholders of each case. These evaluation aspects were extracted from a UVON-generated ontology structure that reflects both the internally declared required quality attributes in the 7 eHealth applications of the FI-STAR project and the evaluation aspects recommended by the Model for ASsessment of Telemedicine applications (MAST) evaluation framework. The extracted evaluation aspects were used to create questionnaires (for the corresponding patients and health professionals) to evaluate each individual case and the whole of the FI-STAR project. The UVON method can provide a relevant set of evaluation aspects for a heterogeneous set of health information systems by organizing, unifying, and aggregating the quality attributes through ontological structures. Those quality attributes can be either suggested by evaluation models or elicited from the stakeholders of those systems in the form of system requirements. The method continues to be systematic, context sensitive, and relevant across a heterogeneous set of health information systems.

Close Relationships and Attributions for Peer Victimization among Late Adolescents

ERIC Educational Resources Information Center

Chen, Xiaochen; Graham, Sandra

2012-01-01

This study examined the effect of close relationships (best friendship and romantic relationship) on late adolescents' casual attributions for peer victimization. A total of 1106 twelfth grade students completed self-report measures of perceived peer victimization, self-blame attribution, psychological maladjustment (loneliness and social…

Synchronization Design and Error Analysis of Near-Infrared Cameras in Surgical Navigation.

PubMed

Cai, Ken; Yang, Rongqian; Chen, Huazhou; Huang, Yizhou; Wen, Xiaoyan; Huang, Wenhua; Ou, Shanxing

2016-01-01

The accuracy of optical tracking systems is important to scientists. With the improvements reported in this regard, such systems have been applied to an increasing number of operations. To enhance the accuracy of these systems further and to reduce the effect of synchronization and visual field errors, this study introduces a field-programmable gate array (FPGA)-based synchronization control method, a method for measuring synchronous errors, and an error distribution map in field of view. Synchronization control maximizes the parallel processing capability of FPGA, and synchronous error measurement can effectively detect the errors caused by synchronization in an optical tracking system. The distribution of positioning errors can be detected in field of view through the aforementioned error distribution map. Therefore, doctors can perform surgeries in areas with few positioning errors, and the accuracy of optical tracking systems is considerably improved. The system is analyzed and validated in this study through experiments that involve the proposed methods, which can eliminate positioning errors attributed to asynchronous cameras and different fields of view.

[Stress and autonomic dysregulation in patients with fibromyalgia syndrome].

PubMed

Friederich, H-C; Schellberg, D; Mueller, K; Bieber, C; Zipfel, S; Eich, W

2005-06-01

The aim of the present study was to evaluate to what extent the orthostatic dysregulation of FMS patients can be attributed primarily to reduced baroreceptor-mediated activation of the sympathetic nervous system and whether a hyporeactive sympathetic nervous system can also be confirmed for mental stress. A total of 28 patients with primary FMS were examined and compared with 15 healthy subjects. Diagnostic investigations of the autonomic nervous system were based on measuring HRV in frequency range and assessing spontaneous baroreflex sensitivity (sBRS) under mental stress and passive orthostatism. Both under orthostatic and mental stress FMS patients exhibited reduced activation of the sympathetic nervous system as measured by the spectral power of HRV in the low-frequency range and the mean arterial blood pressure or heart rate. The present study provided no indications for dysregulation of sBRS. The results obtained confirm the hypothesis of a hyporeactive stress system in FMS patients for both peripherally and centrally mediated stimulation of the sympathetic nervous system.

Secondary Startup Neutron Sources as a Source of Tritium in a Pressurized Water Reactor (PWR) Reactor Coolant System (RCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaver, Mark W.; Lanning, Donald D.

2010-02-01

The hypothesis of this paper is that the Zircaloy clad fuel source is minimal and that secondary startup neutron sources are the significant contributors of the tritium in the RCS that was previously assigned to release from fuel. Currently there are large uncertainties in the attribution of tritium in a Pressurized Water Reactor (PWR) Reactor Coolant System (RCS). The measured amount of tritium in the coolant cannot be separated out empirically into its individual sources. Therefore, to quantify individual contributors, all sources of tritium in the RCS of a PWR must be understood theoretically and verified by the sum ofmore » the individual components equaling the measured values.« less

Do Inequalities in Neighborhood Walkability Drive Disparities in Older Adults’ Outdoor Walking?

PubMed Central

van Maarseveen, Martin

2017-01-01

Older residents of high-deprivation areas walk less than those of low-deprivation areas. Previous research has shown that neighborhood built environment may support and encourage outdoor walking. The extent to which the built environment supports and encourages walking is called “walkability”. This study examines inequalities in neighborhood walkability in high- versus low-deprivation areas and their possible influences on disparities in older adults’ outdoor walking levels. For this purpose, it focuses on specific neighborhood built environment attributes (residential density, land-use mix and intensity, street connectivity, and retail density) relevant to neighborhood walkability. It applied a mixed-method approach, included 173 participants (≥65 years), and used a Geographic Information System (GIS) and walking interviews (with a sub-sample) to objectively and subjectively measure neighborhood built environment attributes. Outdoor walking levels were measured by using the Geographic Positioning System (GPS) technology. Data on personal characteristics was collected by completing a questionnaire. The results show that inequalities in certain land-use intensity (i.e., green spaces, recreation centers, schools and industries) in high- versus low-deprivation areas may influence disparities in older adults’ outdoor walking levels. Modifying neighborhood land use intensity may help to encourage outdoor walking in high-deprivation areas. PMID:28686219

Neighborhood Environments and Objectively Measured Physical Activity in 11 Countries

PubMed Central

Cerin, Ester; Cain, Kelli L; Conway, Terry L; Dyck, Delfien Van; Hinckson, Erica; Schipperijn, Jasper; Bourdeaudhuij, Ilse De; Owen, Neville; Davey, Rachel C; Hino, Adriano Akira Ferreira; Mitáš, Josef; Orzanco-Garralda, Rosario; Salvo, Deborah; Sarmiento, Olga L; Christiansen, Lars B; Macfarlane, Duncan J; Schofield, Grant; Sallis, James F

2014-01-01

Purpose Environmental changes are potentially effective population-level physical activity (PA) promotion strategies. However, robust multi-site evidence to guide international action for developing activity-supportive environments is lacking. We estimated pooled associations of perceived environmental attributes with objectively-measured PA outcomes; between-site differences in such associations; and, the extent to which perceived environmental attributes explain between-site differences in PA. Methods This was a cross-sectional study conducted in 16 cities located in Belgium, Brazil, Colombia, Czech Republic, Denmark, China, Mexico, New Zealand, Spain, United Kingdom, and USA. Participants were 6,968 adults residing in administrative units stratified by socio-economic status and transport-related walkability. Predictors were 10 perceived neighborhood environmental attributes. Outcome measures were accelerometry-assessed weekly minutes of moderate-to-vigorous PA (MVPA) and meeting the PA guidelines for cancer/weight gain prevention (420 min/week of MVPA). Results Most perceived neighborhood attributes were positively associated with the PA outcomes in the pooled, site-adjusted, single-predictor models. Associations were generalizable across geographical locations. Aesthetics and land use mix – access were significant predictors of both PA outcomes in the fully-adjusted models. Environmental attributes accounted for within-site variability in MVPA corresponding to a 3 min/d or 21 min/week standard deviation. Large between-site differences in PA outcomes were observed: 15.9% to 16.8% of these differences were explained by perceived environmental attributes. All neighborhood attributes were associated with between-site differences in the total effects of the perceived environment on PA outcomes. Conclusions Residents’ perceptions of neighborhood attributes that facilitate walking were positively associated with objectively-measured MVPA and meeting the guidelines for cancer/weight gain prevention at the within- and between-site levels. Associations were similar across study sites, lending support for international recommendations for designing PA-friendly built environments. PMID:24781892

Comparing Selections of Environmental Variables for Ecological Studies: A Focus on Terrain Attributes.

PubMed

Lecours, Vincent; Brown, Craig J; Devillers, Rodolphe; Lucieer, Vanessa L; Edinger, Evan N

2016-01-01

Selecting appropriate environmental variables is a key step in ecology. Terrain attributes (e.g. slope, rugosity) are routinely used as abiotic surrogates of species distribution and to produce habitat maps that can be used in decision-making for conservation or management. Selecting appropriate terrain attributes for ecological studies may be a challenging process that can lead users to select a subjective, potentially sub-optimal combination of attributes for their applications. The objective of this paper is to assess the impacts of subjectively selecting terrain attributes for ecological applications by comparing the performance of different combinations of terrain attributes in the production of habitat maps and species distribution models. Seven different selections of terrain attributes, alone or in combination with other environmental variables, were used to map benthic habitats of German Bank (off Nova Scotia, Canada). 29 maps of potential habitats based on unsupervised classifications of biophysical characteristics of German Bank were produced, and 29 species distribution models of sea scallops were generated using MaxEnt. The performances of the 58 maps were quantified and compared to evaluate the effectiveness of the various combinations of environmental variables. One of the combinations of terrain attributes-recommended in a related study and that includes a measure of relative position, slope, two measures of orientation, topographic mean and a measure of rugosity-yielded better results than the other selections for both methodologies, confirming that they together best describe terrain properties. Important differences in performance (up to 47% in accuracy measurement) and spatial outputs (up to 58% in spatial distribution of habitats) highlighted the importance of carefully selecting variables for ecological applications. This paper demonstrates that making a subjective choice of variables may reduce map accuracy and produce maps that do not adequately represent habitats and species distributions, thus having important implications when these maps are used for decision-making.

Development and testing of indicators to measure coordination of clinical information and management across levels of care.

PubMed

Aller, Marta-Beatriz; Vargas, Ingrid; Coderch, Jordi; Calero, Sebastià; Cots, Francesc; Abizanda, Mercè; Farré, Joan; Llopart, Josep Ramon; Colomés, Lluís; Vázquez, María Luisa

2015-08-13

Coordination across levels of care is becoming increasingly important due to rapid advances in technology, high specialisation and changes in the organization of healthcare services; to date, however, the development of indicators to evaluate coordination has been limited. The aim of this study is to develop and test a set of indicators to comprehensively evaluate clinical coordination across levels of care. A systematic review of literature was conducted to identify indicators of clinical coordination across levels of care. These indicators were analysed to identify attributes of coordination and classified accordingly. They were then discussed within an expert team and adapted or newly developed, and their relevance, scientific soundness and feasibility were examined. The indicators were tested in three healthcare areas of the Catalan health system. 52 indicators were identified addressing 11 attributes of clinical coordination across levels of care. The final set consisted of 21 output indicators. Clinical information transfer is evaluated based on information flow (4) and the adequacy of shared information (3). Clinical management coordination indicators evaluate care coherence through diagnostic testing (2) and medication (1), provision of care at the most appropriate level (2), completion of diagnostic process (1), follow-up after hospital discharge (4) and accessibility across levels of care (4). The application of indicators showed differences in the degree of clinical coordination depending on the attribute and area. A set of rigorous and scientifically sound measures of clinical coordination across levels of care were developed based on a literature review and discussion with experts. This set of indicators comprehensively address the different attributes of clinical coordination in main transitions across levels of care. It could be employed to identify areas in which health services can be improved, as well as to measure the effect of efforts to improve clinical coordination in healthcare organizations.

Measurement of carbon capture efficiency and stored carbon leakage

DOEpatents

Keeling, Ralph F.; Dubey, Manvendra K.

2013-01-29

Data representative of a measured carbon dioxide (CO.sub.2) concentration and of a measured oxygen (O.sub.2) concentration at a measurement location can be used to determine whether the measured carbon dioxide concentration at the measurement location is elevated relative to a baseline carbon dioxide concentration due to escape of carbon dioxide from a source associated with a carbon capture and storage process. Optionally, the data can be used to quantify a carbon dioxide concentration increase at the first location that is attributable to escape of carbon dioxide from the source and to calculate a rate of escape of carbon dioxide from the source by executing a model of gas-phase transport using at least the first carbon dioxide concentration increase. Related systems, methods, and articles of manufacture are also described.

Neural Correlates of Belief and Emotion Attribution in Schizophrenia.

PubMed

Lee, Junghee; Horan, William P; Wynn, Jonathan K; Green, Michael F

2016-01-01

Impaired mental state attribution is a core social cognitive deficit in schizophrenia. With functional magnetic resonance imaging (fMRI), this study examined the extent to which the core neural system of mental state attribution is involved in mental state attribution, focusing on belief attribution and emotion attribution. Fifteen schizophrenia outpatients and 14 healthy controls performed two mental state attribution tasks in the scanner. In a Belief Attribution Task, after reading a short vignette, participants were asked infer either the belief of a character (a false belief condition) or a physical state of an affair (a false photograph condition). In an Emotion Attribution Task, participants were asked either to judge whether character(s) in pictures felt unpleasant, pleasant, or neutral emotion (other condition) or to look at pictures that did not have any human characters (view condition). fMRI data were analyzing focusing on a priori regions of interest (ROIs) of the core neural systems of mental state attribution: the medial prefrontal cortex (mPFC), temporoparietal junction (TPJ) and precuneus. An exploratory whole brain analysis was also performed. Both patients and controls showed greater activation in all four ROIs during the Belief Attribution Task than the Emotion Attribution Task. Patients also showed less activation in the precuneus and left TPJ compared to controls during the Belief Attribution Task. No significant group difference was found during the Emotion Attribution Task in any of ROIs. An exploratory whole brain analysis showed a similar pattern of neural activations. These findings suggest that while schizophrenia patients rely on the same neural network as controls do when attributing beliefs of others, patients did not show reduced activation in the key regions such as the TPJ. Further, this study did not find evidence for aberrant neural activation during emotion attribution or recruitment of compensatory brain regions in schizophrenia.

Abstracting Attribute Space for Transfer Function Exploration and Design.

PubMed

Maciejewski, Ross; Jang, Yun; Woo, Insoo; Jänicke, Heike; Gaither, Kelly P; Ebert, David S

2013-01-01

Currently, user centered transfer function design begins with the user interacting with a one or two-dimensional histogram of the volumetric attribute space. The attribute space is visualized as a function of the number of voxels, allowing the user to explore the data in terms of the attribute size/magnitude. However, such visualizations provide the user with no information on the relationship between various attribute spaces (e.g., density, temperature, pressure, x, y, z) within the multivariate data. In this work, we propose a modification to the attribute space visualization in which the user is no longer presented with the magnitude of the attribute; instead, the user is presented with an information metric detailing the relationship between attributes of the multivariate volumetric data. In this way, the user can guide their exploration based on the relationship between the attribute magnitude and user selected attribute information as opposed to being constrained by only visualizing the magnitude of the attribute. We refer to this modification to the traditional histogram widget as an abstract attribute space representation. Our system utilizes common one and two-dimensional histogram widgets where the bins of the abstract attribute space now correspond to an attribute relationship in terms of the mean, standard deviation, entropy, or skewness. In this manner, we exploit the relationships and correlations present in the underlying data with respect to the dimension(s) under examination. These relationships are often times key to insight and allow us to guide attribute discovery as opposed to automatic extraction schemes which try to calculate and extract distinct attributes a priori. In this way, our system aids in the knowledge discovery of the interaction of properties within volumetric data.

Social distance and behavioral attributes of developmentally handicapped and normal children.

PubMed

Sherman, L W; Burgess, D E

1985-12-01

20 behavioral attributes predicting social distance were examined among 101 junior high school students in six classrooms. The sample included 8 developmentally handicapped students, of whom at least one of each was mainstreamed into each classroom. Subjects were predominantly white, middle-class, suburban midwesterners. A sociometric nomination measure was used to obtain behavioral attribute profiles of the students which were then used to predict a psychometric measure of social distance. Handicapped students were not more socially distant than their normal peers. Factor analysis of the 20 behavioral attributes yielded four factors, three of which were significant predictors of classroom social distance, accounting for better than half the variance in social distance. These were described as Incompetent/Unassertive, Positive/Active/Assertive, and Passive/Unassertive. Social rejection in mainstreamed classrooms is more a function of perceived behavioral attributes than the label developmentally handicapped.

The moderating role of objective and subjective numeracy in attribute framing.

PubMed

Gamliel, Eyal; Kreiner, Hamutal; Garcia-Retamero, Rocio

2016-04-01

Previous research has found that objective numeracy moderates framing effects: People who are less numerate were found to be more susceptible to goal-framing and attribute-framing effects than people who are highly numerate. This study examined the possibility that subjective numeracy likewise moderates attribute framing in contexts where participants are presented with percentages of success or failure. The results show that compared with highly numerate participants, less numerate participants were more susceptible to the effect of attribute framing. Interestingly, this moderating effect was revealed only when using objective numeracy measures, and not when subjective numeracy measures were used. Future research is suggested to replicate these findings, to establish the generalizability of numeracy as a moderator of other cognitive biases, and to examine several possible theoretical explanations for the differential moderation of attribute-framing bias. © 2015 International Union of Psychological Science.

Wavefront attributes in anisotropic media

NASA Astrophysics Data System (ADS)

Vanelle, C.; Abakumov, I.; Gajewski, D.

2018-07-01

Surface-measured wavefront attributes are the key ingredient to multiparameter methods, which are nowadays standard tools in seismic data processing. However, most operators are restricted to application to isotropic media. Whereas application of an isotropic operator will still lead to satisfactory stack results, further processing steps that interpret isotropic stacking parameters in terms of wavefront attributes will lead to erroneous results if anisotropy is present but not accounted for. In this paper, we derive relationships between the stacking parameters and anisotropic wavefront attributes that allow us to apply the common reflection surface type operator to 3-D media with arbitrary anisotropy for the zero-offset and finite-offset configurations including converted waves. The operator itself is expressed in terms of wavefront attributes that are measured in the acquisition surface, that is, no model assumptions are made. Numerical results confirm that the accuracy of the new anisotropic operator is of the same magnitude as that of its isotropic counterpart.

Distinguishing dose, focus, and blur for lithography characterization and control

NASA Astrophysics Data System (ADS)

Ausschnitt, Christopher P.; Brunner, Timothy A.

2007-03-01

We derive a physical model to describe the dependence of pattern dimensions on dose, defocus and blur. The coefficients of our model are constants of a given lithographic process. Model inversion applied to dimensional measurements then determines effective dose, defocus and blur for wafers patterned with the same process. In practice, our approach entails the measurement of proximate grating targets of differing dose and focus sensitivity. In our embodiment, the measured attribute of one target is exclusively sensitive to dose, whereas the measured attributes of a second target are distinctly sensitive to defocus and blur. On step-and-scan exposure tools, z-blur is varied in a controlled manner by adjusting the across slit tilt of the image plane. The effects of z-blur and x,y-blur are shown to be equivalent. Furthermore, the exposure slit width is shown to determine the tilt response of the grating attributes. Thus, the response of the measured attributes can be characterized by a conventional focus-exposure matrix (FEM), over which the exposure tool settings are intentionally changed. The model coefficients are determined by a fit to the measured FEM response. The model then fully defines the response for wafers processed under "fixed" dose, focus and blur conditions. Model inversion applied to measurements from the same targets on all such wafers enables the simultaneous determination of effective dose and focus/tilt (DaFT) at each measurement site.

College-Student Personal-Growth and Attributions of Cause

ERIC Educational Resources Information Center

Anderson, W. P., Jr.; Lopez-Baez, Sandra I.

2012-01-01

Little is known about levels of personal growth attributed by students to typical college life experiences. This paper documents two studies of student self-reported and posttraumatic growth and compares growth levels across populations. Both studies measure student attributions of cause to academic and non-academic experiences, respectively. It…

Developing a Questionnaire to Measure Perceived Attributes of eHealth Innovations

ERIC Educational Resources Information Center

Atkinson, Nancy L.

2007-01-01

Objectives: To design a valid and reliable questionnaire to assess perceived attributes of technology-based health education innovations. Methods: College students in 12 personal health courses reviewed a prototype eHealth intervention using a 30-item instrument based upon diffusion theory's perceived attributes of an innovation. Results:…

Gender Differences in Cognitive and Affective Responses to Sexual Coercion

ERIC Educational Resources Information Center

Byers, E. Sandra; Glenn, Shannon A.

2012-01-01

This study examined gender differences in responses to sexual coercive experiences in mixed-sex (male-female) relationships. Participants were 112 women and 28 men who had experienced sexual coercion and completed measures of cognitive (attributions to self, attributions to the coercer, internal attributions) and affective (guilt, shame)…

Development and Validation of the Masculine Attributes Questionnaire

PubMed Central

Cho, Junhan; Kogan, Steven M.

2017-01-01

The present study describes the development and validation of the Masculine Attributes Questionnaire (MAQ). The purpose of this study was to develop a theoretically and empirically grounded measure of masculine attributes for sexual health research with African American young men. Consistent with Whitehead’s theory, the MAQ items were hypothesized to comprise two components representing reputation-based and respect-based attributes. The sample included 505 African American men aged 19 to 22 years (M = 20.29, SD = 1.10) living in resource-poor communities in the rural South. Convergent and discriminant validity of the MAQ were assessed by examining the associations of masculinity attributes with psychosocial factors. Criterion validity was assessed by examining the extent to which the MAQ subscales predicted sexual risk behavior outcomes. Consistent with study hypotheses, the MAQ was composed of (a) reputation-based attributes oriented toward sexual prowess, toughness, and authority-defying behavior and (b) respect-based attributes oriented toward economic independence, socially approved levels of hard work and education, and committed romantic relationships. Reputation-based attributes were associated positively with street code and negatively related to academic orientation, vocational engagement, and self-regulation, whereas respect-based attributes were associated positively with academic and vocational orientations and self-regulation. Finally, reputation-based attributes predicted sexual risk behaviors including concurrent sexual partnerships, multiple sexual partners, marijuana use, and incarceration, net of the influence of respect-based attributes. The development of the MAQ provides a new measure that permits systematic quantitative investigation of the associations between African American men’s masculinity ideology and sexual risk behavior. PMID:28413906

Development and Validation of the Masculine Attributes Questionnaire.

PubMed

Cho, Junhan; Kogan, Steven M

2017-07-01

The present study describes the development and validation of the Masculine Attributes Questionnaire (MAQ). The purpose of this study was to develop a theoretically and empirically grounded measure of masculine attributes for sexual health research with African American young men. Consistent with Whitehead's theory, the MAQ items were hypothesized to comprise two components representing reputation-based and respect-based attributes. The sample included 505 African American men aged 19 to 22 years ( M = 20.29, SD = 1.10) living in resource-poor communities in the rural South. Convergent and discriminant validity of the MAQ were assessed by examining the associations of masculinity attributes with psychosocial factors. Criterion validity was assessed by examining the extent to which the MAQ subscales predicted sexual risk behavior outcomes. Consistent with study hypotheses, the MAQ was composed of (a) reputation-based attributes oriented toward sexual prowess, toughness, and authority-defying behavior and (b) respect-based attributes oriented toward economic independence, socially approved levels of hard work and education, and committed romantic relationships. Reputation-based attributes were associated positively with street code and negatively related to academic orientation, vocational engagement, and self-regulation, whereas respect-based attributes were associated positively with academic and vocational orientations and self-regulation. Finally, reputation-based attributes predicted sexual risk behaviors including concurrent sexual partnerships, multiple sexual partners, marijuana use, and incarceration, net of the influence of respect-based attributes. The development of the MAQ provides a new measure that permits systematic quantitative investigation of the associations between African American men's masculinity ideology and sexual risk behavior.

Attribution-Based Nocebo Effects. Perceived Effects of a Placebo Pill and a Sham Magnetic Field on Cognitive Performance and Somatic Symptoms.

PubMed

Szemerszky, Renáta; Dömötör, Zsuzsanna; Berkes, Tímea; Köteles, Ferenc

2016-04-01

Negative non-specific (nocebo-like) effects of medications and electromagnetic fields are often described as results of mistaken attribution. The current study aimed to find empirical evidence supporting this theory. Participants completed questionnaires assessing modern health worries, health anxiety, and somatosensory amplification, were assigned to one of three conditions (placebo pill with sedative information, sham magnetic field, or control), and completed a 14-min vigilance task. Changes in physiological arousal (heart rate, heart rate variability, and skin conductance) and reported symptoms were also measured. Finally, causal attributions concerning cognitive performance and reported symptoms were assessed. No increase in symptom reports and physiological arousal was measured in the two intervention groups. A perceived negative effect on cognitive performance was attributed to both sham conditions, and attributions were connected to modern health worries. A proportion of reported symptoms was ascribed to the placebo pill but not to the sham magnetic field. Symptom attributions were not related to any assessed psychological variables. An aroused physiological state is not necessary for the automatic causal attribution process. Negative effects attributed to medication and environmental factors can be regarded as unavoidable side effects of human cognitive-emotional functioning; they might be alleviated, but cannot be completely eradicated.

A longitudinal analysis of nursing home outcomes.

PubMed Central

Porell, F; Caro, F G; Silva, A; Monane, M

1998-01-01

OBJECTIVE: To investigate resident and facility attributes associated with long-term care health outcomes in nursing homes. DATA SOURCES: Quarterly Management Minutes Questionnaire (MMQ) survey data for Medicaid case-mix reimbursement of nursing homes in Massachusetts from 1991 to 1994, for specification of outcomes and resident attributes. Facility attributes are specified from cost report data. STUDY DESIGN: Multivariate logistic and "state-dependence" regression models are estimated for survival, ADL functional status, incontinence status, and mental status outcomes from longitudinal residence histories of Medicaid residents spanning 3 to 36 months in length. Outcomes are specified to be a function of resident demographic and diagnostic attributes and facility-level operating and nurse staffing attributes. PRINCIPAL FINDINGS: The estimated parameters for resident demographic and diagnostic attributes showed a great deal of construct validity with respect to clinical expectations regarding risk factors for adverse outcomes. Few facility attributes were associated with outcomes generally, and none was significantly associated with all four outcomes. CONCLUSIONS: The absence of uniform associations between facility attributes and the various long-term care health outcomes studied suggests that strong facility performance on one health outcome may coexist with much weaker performance on other outcomes. This has implications for the aggregation of individual facility performance measures on multiple outcomes and the development of overall outcome performance measures. PMID:9776939

Initial steps toward automation of a propellant processor

NASA Technical Reports Server (NTRS)

Schallhorn, Paul; Ramohalli, Kumar

1990-01-01

This paper presents the results from an experimental study aimed at ultimately automating the mixing of propellants in order to minimize unintended variations usually attributed to human error. The water heater and delivery system of a one-pint Baker-Perkins (APV) vertical mixer are automated with computer control. Various innovations are employed to introduce economy and low thermal inertia. Some of these include twin heaters/reservoirs instead of one large reservoir, a compact water mixer for achieving the desired temperature quickly, and thorough insulation of the entire water system. The completed system is tested during two propellant mixes. The temperature uniformly is proven through careful measurements employing several local thermocouples.

Evaluating Health Information Systems Using Ontologies

PubMed Central

Anderberg, Peter; Larsson, Tobias C; Fricker, Samuel A; Berglund, Johan

2016-01-01

Background There are several frameworks that attempt to address the challenges of evaluation of health information systems by offering models, methods, and guidelines about what to evaluate, how to evaluate, and how to report the evaluation results. Model-based evaluation frameworks usually suggest universally applicable evaluation aspects but do not consider case-specific aspects. On the other hand, evaluation frameworks that are case specific, by eliciting user requirements, limit their output to the evaluation aspects suggested by the users in the early phases of system development. In addition, these case-specific approaches extract different sets of evaluation aspects from each case, making it challenging to collectively compare, unify, or aggregate the evaluation of a set of heterogeneous health information systems. Objectives The aim of this paper is to find a method capable of suggesting evaluation aspects for a set of one or more health information systems—whether similar or heterogeneous—by organizing, unifying, and aggregating the quality attributes extracted from those systems and from an external evaluation framework. Methods On the basis of the available literature in semantic networks and ontologies, a method (called Unified eValuation using Ontology; UVON) was developed that can organize, unify, and aggregate the quality attributes of several health information systems into a tree-style ontology structure. The method was extended to integrate its generated ontology with the evaluation aspects suggested by model-based evaluation frameworks. An approach was developed to extract evaluation aspects from the ontology that also considers evaluation case practicalities such as the maximum number of evaluation aspects to be measured or their required degree of specificity. The method was applied and tested in Future Internet Social and Technological Alignment Research (FI-STAR), a project of 7 cloud-based eHealth applications that were developed and deployed across European Union countries. Results The relevance of the evaluation aspects created by the UVON method for the FI-STAR project was validated by the corresponding stakeholders of each case. These evaluation aspects were extracted from a UVON-generated ontology structure that reflects both the internally declared required quality attributes in the 7 eHealth applications of the FI-STAR project and the evaluation aspects recommended by the Model for ASsessment of Telemedicine applications (MAST) evaluation framework. The extracted evaluation aspects were used to create questionnaires (for the corresponding patients and health professionals) to evaluate each individual case and the whole of the FI-STAR project. Conclusions The UVON method can provide a relevant set of evaluation aspects for a heterogeneous set of health information systems by organizing, unifying, and aggregating the quality attributes through ontological structures. Those quality attributes can be either suggested by evaluation models or elicited from the stakeholders of those systems in the form of system requirements. The method continues to be systematic, context sensitive, and relevant across a heterogeneous set of health information systems. PMID:27311735

Seismic attenuation and scattering tomography of rock samples using stochastic wavefields: linking seismology, volcanology, and rock physics.

NASA Astrophysics Data System (ADS)

Fazio, Marco; De Siena, Luca; Benson, Phillip

2016-04-01

Seismic attenuation and scattering are two attributes that can be linked with porosity and permeability in laboratory experiments. When measuring these two quantities using seismic waveforms recorder at lithospheric and volcanic scales the areas of highest heterogeneity, as batches of melt and zones of high deformation, produce anomalous values of the measured quantities, the seismic quality factor and scattering coefficient. When employed as indicators of heterogeneity and absorption in volcanic areas these anomalous effects become strong indicators of magma accumulation and tectonic boundaries, shaping magmatic chambers and conduit systems. We perform attenuation and scattering measurements and imaging using seismic waveforms produced in laboratory experiments, at frequencies ranging between the kHz and MHz. As attenuation and scattering are measured from the shape of the envelopes, disregarding phases, we are able to connect the observations with the micro fracturing and petrological quantities previously measured on the sample. Connecting the imaging of dry and saturated samples via these novel attributes with the burst of low-period events with increasing saturation and deformation is a challenge. Its solution could plant the seed for better relating attenuation and scattering tomography measurements to the presence of fluids and gas, therefore creating a novel path for reliable porosity and permeability tomography. In particular for volcanoes, being able to relate attenuation/scattering measurements with low-period micro seismicity could deliver new data to settle the debate about if both source and medium can produce seismic resonance.

A laser-optical sensor system for blade vibration detection of high-speed compressors

NASA Astrophysics Data System (ADS)

Neumann, Mathias; Dreier, Florian; Günther, Philipp; Wilke, Ulrich; Fischer, Andreas; Büttner, Lars; Holzinger, Felix; Schiffer, Heinz-Peter; Czarske, Jürgen

2015-12-01

Improved efficiency as well as increased lifetime of turbines and compressors are important goals in turbomachinery development. A significant enhancement to accomplish these aims can be seen in online monitoring of the operating parameters of the machines. During the operation of compressors it is of high interest to predict critical events like flutter or stall which can be achieved by observing blade deformations and vibrations. We have developed a laser Doppler distance sensor (LDDS), which is capable of simultaneously measuring the radial blade expansions, the circumferential blade deflections as well as the circumferential velocities of the rotor blade tips. As a result, an increase of blade vibrations is measured before stall at characteristic frequencies. While the detected vibration frequencies and the vibration increase are in agreement with the measurement results of a commercial capacitive blade tip timing system, the measured values of the vibration amplitudes differ by a factor of three. This difference can be mainly attributed to the different measurement locations and to the different measurement approaches. Since the LDDS is applicable to metal as well as ceramic, carbon-fiber and glass-fiber reinforced composite blades, a universally applicable sensor system for stall prediction and status monitoring is presented.

Exposure to airborne particulate matter in the subway system.

PubMed

Martins, Vânia; Moreno, Teresa; Minguillón, María Cruz; Amato, Fulvio; de Miguel, Eladio; Capdevila, Marta; Querol, Xavier

2015-04-01

The Barcelona subway system comprises eight subway lines, at different depths, with different tunnel dimensions, station designs and train frequencies. An extensive measurement campaign was performed in this subway system in order to characterise the airborne particulate matter (PM) measuring its concentration and investigating its variability, both inside trains and on platforms, in two different seasonal periods (warmer and colder), to better understand the main factors controlling it, and therefore the way to improve air quality. The majority of PM in the underground stations is generated within the subway system, due to abrasion and wear of rail tracks, wheels and braking pads caused during the motion of the trains. Substantial variation in average PM concentrations between underground stations was observed, which might be associated to different ventilation and air conditioning systems, characteristics/design of each station and variations in the train frequency. Average PM2.5 concentrations on the platforms in the subway operating hours ranged from 20 to 51 and from 41 to 91 μg m(-3) in the warmer and colder period, respectively, mainly related to the seasonal changes in the subway ventilation systems. The new subway lines with platform screen doors showed PM2.5 concentrations lower than those in the conventional system, which is probably attributable not only to the more advanced ventilation setup, but also to the lower train frequency and the design of the stations. PM concentrations inside the trains were generally lower than those on the platforms, which is attributable to the air conditioning systems operating inside the trains, which are equipped with air filters. This study allows the analysis and quantification of the impact of different ventilation settings on air quality, which provides an improvement on the knowledge for the general understanding and good management of air quality in the subway system. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

CAT & MAUS: A novel system for true dynamic motion measurement of underlying bony structures with compensation for soft tissue movement.

PubMed

Jia, Rui; Monk, Paul; Murray, David; Noble, J Alison; Mellon, Stephen

2017-09-06

Optoelectronic motion capture systems are widely employed to measure the movement of human joints. However, there can be a significant discrepancy between the data obtained by a motion capture system (MCS) and the actual movement of underlying bony structures, which is attributed to soft tissue artefact. In this paper, a computer-aided tracking and motion analysis with ultrasound (CAT & MAUS) system with an augmented globally optimal registration algorithm is presented to dynamically track the underlying bony structure during movement. The augmented registration part of CAT & MAUS was validated with a high system accuracy of 80%. The Euclidean distance between the marker-based bony landmark and the bony landmark tracked by CAT & MAUS was calculated to quantify the measurement error of an MCS caused by soft tissue artefact during movement. The average Euclidean distance between the target bony landmark measured by each of the CAT & MAUS system and the MCS alone varied from 8.32mm to 16.87mm in gait. This indicates the discrepancy between the MCS measured bony landmark and the actual underlying bony landmark. Moreover, Procrustes analysis was applied to demonstrate that CAT & MAUS reduces the deformation of the body segment shape modeled by markers during motion. The augmented CAT & MAUS system shows its potential to dynamically detect and locate actual underlying bony landmarks, which reduces the MCS measurement error caused by soft tissue artefact during movement. Copyright © 2017 Elsevier Ltd. All rights reserved.

Validation of the Consumer Values versus Perceived Product Attributes Model Measuring the Purchase of Athletic Team Merchandise

ERIC Educational Resources Information Center

Lee, Donghun; Byon, Kevin K.; Schoenstedt, Linda; Johns, Gary; Bussell, Leigh Ann; Choi, Hwansuk

2012-01-01

Various consumer values and perceived product attributes trigger consumptive behaviors of athletic team merchandise (Lee, Trail, Kwon, & Anderson, 2011). Likewise, using a principal component analysis technique on a student sample, a measurement scale was proposed that consisted of nine factors affecting the purchase of athletic team…

The Process of Indicator Selection

Treesearch

Barry R. Noon; Kevin S. McKelvey

2006-01-01

Of all the steps in monitoring, choosing the correct indicators is arguably the most important. The challenge is obvious: among all the possible attributes of an ecosystem that can be measured, select a small number whose measurement will tell you something about all of the unmeasured attributes and processes. Even if a monitoring program is fully funded and...

ASME B89.4.19 Performance Evaluation Tests and Geometric Misalignments in Laser Trackers

PubMed Central

Muralikrishnan, B.; Sawyer, D.; Blackburn, C.; Phillips, S.; Borchardt, B.; Estler, W. T.

2009-01-01

Small and unintended offsets, tilts, and eccentricity of the mechanical and optical components in laser trackers introduce systematic errors in the measured spherical coordinates (angles and range readings) and possibly in the calculated lengths of reference artifacts. It is desirable that the tests described in the ASME B89.4.19 Standard [1] be sensitive to these geometric misalignments so that any resulting systematic errors are identified during performance evaluation. In this paper, we present some analysis, using error models and numerical simulation, of the sensitivity of the length measurement system tests and two-face system tests in the B89.4.19 Standard to misalignments in laser trackers. We highlight key attributes of the testing strategy adopted in the Standard and propose new length measurement system tests that demonstrate improved sensitivity to some misalignments. Experimental results with a tracker that is not properly error corrected for the effects of the misalignments validate claims regarding the proposed new length tests. PMID:27504211

Source apportionment and air quality impact assessment studies in Beijing/China

NASA Astrophysics Data System (ADS)

Suppan, P.; Schrader, S.; Shen, R.; Ling, H.; Schäfer, K.; Norra, S.; Vogel, B.; Wang, Y.

2012-04-01

More than 15 million people in the greater area of Beijing are still suffering from severe air pollution levels caused by sources within the city itself but also from external impacts like severe dust storms and long range advection from the southern and central part of China. Within this context particulate matter (PM) is the major air pollutant in the greater area of Beijing (Garland et al., 2009). PM did not serve only as lead substance for air quality levels and therefore for adverse health impact effects but also for a strong influence on the climate system by changing e.g. the radiative balance. Investigations on emission reductions during the Olympic Summer Games in 2008 have caused a strong reduction on coarser particles (PM10) but not on smaller particles (PM2.5). In order to discriminate the composition of the particulate matter levels, the different behavior of coarser and smaller particles investigations on source attribution, particle characteristics and external impacts on the PM levels of the city of Beijing by measurements and modeling are performed: Examples of long term measurements of PM2.5 filter sampling in 2005 with the objectives of detailed chemical (source attribution, carbon fraction, organic speciation and inorganic composition) and isotopic analyses as well as toxicological assessment in cooperation with several institutions (Karlsruhe Institute of Technology (IfGG/IMG), Helmholtz Zentrum München (HMGU), University Rostock (UR), Chinese University of Mining and Technology Beijing, CUMTB) will be discussed. Further experimental studies include the operation of remote sensing systems to determine continuously the MLH (by a ceilometer) and gaseous air pollutants near the ground (by DOAS systems) as well as at the 320 m measurement tower (adhesive plates at different heights for passive particle collection) in cooperation with the Institute of Atmospheric Physics (IAP) of the Chinese Academy of Sciences (CAS). The influence of the MLH on the air pollution concentration could be demonstrated and will be discussed. The impact of dust storm events on the overall pollution level of particulate matter in the greater area of Beijing is being assessed by the online coupled comprehensive model system COSMO-ART. First results of the dust storm modeling in northern China (2006, April 3rd until 12th) demonstrates very well the general behavior of the meteorological parameters temperature and humidity as well as a good agreement between modeled and measured dust storm concentration variability at Beijing in the course of time. The results show the importance of intertwine investigations of measurements and modeling, the analysis of local air pollution levels as well as the impact and analysis of advective process in the greater region of Beijing. Comprehensive investigations on particulate matter are a prerequisite for the knowledge of the source strengths and source attribution to the overall air pollution level. Only this knowledge can help to formulate and to introduce specific reduction measures to reduce coarser as well as finer particulates.

Analysis of design attributes and crashes on the Oregon highway system : final report.

DOT National Transportation Integrated Search

2001-08-01

This report has investigated the statistical relationship between crash activity and roadway design attributes on the Oregon state : highway system. Crash models were estimated from highway segments distinguished by functional classification (freeway...

Magnetic Field Response Measurement Acquisition System

NASA Technical Reports Server (NTRS)

Woodard, Stanley E.; Taylor,Bryant D.; Shams, Qamar A.; Fox, Robert L.

2007-01-01

This paper presents a measurement acquisition method that alleviates many shortcomings of traditional measurement systems. The shortcomings are a finite number of measurement channels, weight penalty associated with measurements, electrical arcing, wire degradations due to wear or chemical decay and the logistics needed to add new sensors. Wire degradation has resulted in aircraft fatalities and critical space launches being delayed. The key to this method is the use of sensors designed as passive inductor-capacitor circuits that produce magnetic field responses. The response attributes correspond to states of physical properties for which the sensors measure. Power is wirelessly provided to the sensing element by using Faraday induction. A radio frequency antenna produces a time-varying magnetic field used to power the sensor and receive the magnetic field response of the sensor. An interrogation system for discerning changes in the sensor response frequency, resistance and amplitude has been developed and is presented herein. Multiple sensors can be interrogated using this method. The method eliminates the need for a data acquisition channel dedicated to each sensor. The method does not require the sensors to be near the acquisition hardware. Methods of developing magnetic field response sensors and the influence of key parameters on measurement acquisition are discussed. Examples of magnetic field response sensors and the respective measurement characterizations are presented. Implementation of this method on an aerospace system is discussed.

Chinese green product standards: international experience and pathway for a unified system

NASA Astrophysics Data System (ADS)

Yun, Fu; Ling, Lin; Dongfeng, Gao; Shuo, Yang

2017-11-01

The establishment of a unified green product standard system is of great importance regarding the effective supply of green products and meeting trend of the consumption upgrade. It also is helpful to reduce the cost of green information disclosure of enterprises, and facilitate the supply-side structural reform. Based on the experience of developing and implementing green product standards in the EU, Germany, America, Japan and so on, combined with current Chinese standard systems including environmental protection, energy conservation, water conservation, low carbon, recycling, regeneration and organic, with the adoption of the life cycle thinking, this paper brings forward basic requirements on organizations including pollutant emissions, establishment of management system, energy conservation and emission reduction technology and green supply chain management, and proposes indicator requirements on product including resource attributes, energy attributes, environmental attributes and quality attributes, so as to guide the establishment of green product evaluation standards in the context of China.

Improving sensitivity and source attribution of homemade explosives with low-frequency/THz-Raman spectroscopy

NASA Astrophysics Data System (ADS)

Carriere, James T. A.; Havermeyer, Frank; Heyler, Randy A.

2014-05-01

Rapid identification and source attribution of homemade explosives (HMEs) is vital to national defense and homeland security efforts. Since HMEs can be prepared in a variety of methods with different component ingredients, telltale traces can be left behind in the final structural form of the material. These differences manifest as polymorphs, isomers, conformers or even contaminants that can all impact the low energy vibrational modes of the molecule. Conventional Raman spectroscopy systems confine their measurements to the "chemical fingerprint" region and are unable to detect low frequency Raman signals (<200cm-1) where these low energy modes are found. This gap in sensitivity limits the conclusions that can be drawn from a single Raman measurement and creates the need for multiple measurement techniques to confirm any results. We present results from a new rugged, portable approach that is capable of extending the range of Raman to include these low frequency signals down to ~5cm-1, plus complementary anti-Stokes spectra, with measurement times on the order of seconds. We demonstrate the diversity of signals that lie in this region that directly correlate to the molecular structure of the material, resulting in a new Raman "structural fingerprint" region. By correlating the measured results with known samples from a spectral library, rapid identification of the specific method of manufacture can be made.

The VALS: A new tool to measure people's general valued attributes of landscapes.

PubMed

Kendal, Dave; Ford, Rebecca M; Anderson, Nerida M; Farrar, Alison

2015-11-01

Research on values for natural areas has largely focussed on theoretical concerns such as distinguishing different kinds of values held by people. However practice, policymaking, planning and management is typically focused on more tangible valued attributes of the landscape such as biodiversity and recreation infrastructure that can be manipulated by management actions. There is a need for valid psychometric measures of such values that are suited to informing land management policies. A Valued Attributes of Landscape Scale (VALS) was developed, derived from a document analysis of values expressed in public land policy documents. The validity of the VALS was tested in an online survey comparing values across one of three randomly presented landscape contexts in Victoria, Australia: all publicly managed natural land, coastal areas, and large urban parks. A purposive snowball sample was used to recruit participants with a range of views and professional experience with land management, including members of the urban public. Factor analysis of responses (n = 646) separated concepts relating to natural attributes, social functions, the experience of being in natural areas, cultural attributes and productive uses. Relative importance of valued attribute factors was similar across all landscape contexts, although there were small but significant differences in the way people valued social functions (higher in urban parks) and productive uses (lower in urban parks). We conclude that the concept of valued attributes is useful for linking theoretical understandings of people's environmental values to the way values are considered by land managers, and that these attributes can be measured using the VALS instrument to produce data that should be useful for the policy and planning of natural resources. Copyright © 2015 Elsevier Ltd. All rights reserved.

Investigations on the Use of Multi-Species Flask Measurements for Sector-Specific Fossil Fuel CO2 Attribution to Aid Policymakers

NASA Astrophysics Data System (ADS)

Nathan, B.; Lauvaux, T.; Turnbull, J. C.; Sweeney, C.; Karion, A.; Richardson, S.; Miles, N.; Gurney, K. R.; Patarasuk, R.

2016-12-01

Part of the Indianapolis Flux (INFLUX) Experiment has, since 2010, involved recording atmospheric trace gas measurements using NOAA flask packages. The goal of these measurements is to better inform policymakers about the behaviors of greenhouse gas emissions in the Indianapolis urban environment. Radiocarbon dioxide (14CO2) measurements recorded from the flasks allow for delineation of the fossil-fuel carbon dioxide (CO2ff) signal from the total carbon dioxide (CO2) measurement. To give policymakers even more detailed information, we investigate whether the co-measured trace gases could be used as tracers for economic source sectors of CO2ff as predefined by the bottom-up data product Hestia. This is extensively tested using an Observation System Simulation Experiment (OSSE) combining both a top-down approach for all species—influence functions from the tower flask measurements—, and attempting to assign sources via spatial overlaps with the available bottom-up inventory CO2ff source sector definitions. A self-organizing map is implemented for the mathematical attribution of signals to sources, because it can compensate for nonlinear signals (i.e. tracer emissions that do not scale linearly with CO2ff emissions). It is determined that proper attribution is at least not feasible with such a complete lack of bottom-up spatial information about all non-CO2ff potential tracers. This unfeasibility is shown not to be resolved by a test of expanding the dataset with many more theoretical measurements than are realistically available. Here we alter the approach to include the missing prior information: bottom-up estimates of the emission fluxes for a suite of species. We develop these bottom-up emission fluxes from existing whole-city emission fluxes, species-specific source sector partitioning, and the spatial patterns from Hestia CO2ff source sectors. We validate the general approach using the whole-city species: CO2ff ratios derived from all tower flask measurements. Finally, using these tools, multi-species, sector-specific inversions are investigated in the Bayesian framework.

Theory of reliable systems. [systems analysis and design

NASA Technical Reports Server (NTRS)

Meyer, J. F.

1973-01-01

The analysis and design of reliable systems are discussed. The attributes of system reliability studied are fault tolerance, diagnosability, and reconfigurability. Objectives of the study include: to determine properties of system structure that are conducive to a particular attribute; to determine methods for obtaining reliable realizations of a given system; and to determine how properties of system behavior relate to the complexity of fault tolerant realizations. A list of 34 references is included.

Why are hospital-based nursing homes so costly? Relative importance of acuity and treatment setting.

PubMed

Pizer, Steven D; White, Alan J; White, Chapin

2002-05-01

To determine the extent to which higher costs in hospital-based skilled nursing facilities (HBSNF) can be explained by observable resident characteristics and unobservable selection effects, implying a design shortcoming of the skilled nursing facility prospective payment system (SNF PPS) implemented for Medicare-covered stays by the Balanced Budget Act of 1997 (BBA 1997). Data on resident characteristics from the Minimum Data Set (MDS) are combined with staff time costs from the Centers for Medicare and Medicaid Services' (CMS, formerly HCFA) 1995 and 1997 SNF Staff Time Measurement (STM) studies and nontherapy ancillary claim costs extracted from CMS SNF claim records. An endogenous switching model was estimated to measure the effect on costs of the relatively high acuity of HBSNF residents, net of differences purely attributable to the treatment setting. It was found that virtually the entire HBSNF differential is attributable to setting effects with resident characteristics and selection effects playing a negligible role. In addition, it was found that marginal costs associated with particular services and conditions are often lower in hospital-based than in freestanding facilities. HBSNFs incur high costs regardless of the characteristics of their residents. Their high fixed costs accompany relatively low marginal costs associated with admitting high-acuity residents. Consequently, a PPS casemix system that depends on resident characteristics and excludes consideration of facility characteristics (as mandated by BBA 1997) need not unfairly penalize HBSNFs, provided a powerful casemix system is used and HBSNFs specialize in the care of high-acuity residents.

Space Object and Light Attribute Rendering (SOLAR) Projection System

DTIC Science & Technology

2017-05-08

AVAILABILITY STATEMENT A DISTRIBUTION UNLIMITED: PB Public Release 13. SUPPLEMENTARY NOTES 14. ABSTRACT A state of the art planetarium style projection system...Rendering (SOLAR) Projection System 1 Abstract A state of the art planetarium style projection system called Space Object and Light Attribute Rendering...planetarium style projection system for emulation of a variety of close proximity and long range imaging experiments. University at Buffalo’s Space

The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 (Version 2.1) Catchments for the Conterminous United States: PRISM Normals Data

EPA Pesticide Factsheets

This dataset represents climate observations within individual, local NHDPlusV2 catchments and upstream, contributing watersheds. Attributes of the landscape layer were calculated for every local NHDPlusV2 catchment and accumulated to provide watershed-level metrics. (See Supplementary Info for Glossary of Terms) PRISM is a set of monthly, yearly, and single-event gridded data products of mean temperature and precipitation, max/min temperatures, and dewpoints, primarily for the United States. In-situ point measurements are ingested into the PRISM (Parameter elevation Regression on Independent Slopes Model) statistical mapping system. The PRISM products use a weighted regression scheme to account for complex climate regimes associated with orography, rain shadows, temperature inversions, slope aspect, coastal proximity, and other factors. (see Data Sources for links to NHDPlusV2 data and USGS Data) These data are summarized by local catchment and by watershed to produce local catchment-level and watershed-level metrics as a continuous data type (see Data Structure and Attribute Information for a description).

The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 Catchments (Version 2.1) for the Conterminous United States: PRISM Data

EPA Pesticide Factsheets

This dataset represents climate observations within individual, local NHDPlusV2 catchments and upstream, contributing watersheds. Attributes of the landscape layer were calculated for every local NHDPlusV2 catchment and accumulated to provide watershed-level metrics. (See Supplementary Info for Glossary of Terms) PRISM is a set of monthly, yearly, and single-event gridded data products of mean temperature and precipitation, max/min temperatures, and dewpoints, primarily for the United States. In-situ point measurements are ingested into the PRISM (Parameter elevation Regression on Independent Slopes Model) statistical mapping system. The PRISM products use a weighted regression scheme to account for complex climate regimes associated with orography, rain shadows, temperature inversions, slope aspect, coastal proximity, and other factors. (see Data Sources for links to NHDPlusV2 data and USGS Data) These data are summarized by local catchment and by watershed to produce local catchment-level and watershed-level metrics as a continuous data type (see Data Structure and Attribute Information for a description).

Student pharmacists' perceptions of community pharmacy residency programs.

PubMed

Datar, Manasi V; Holmes, Erin R; Adams, Alex J; Stolpe, Samuel F

2013-01-01

To compare penultimate-year (next-to-last) and final-year student pharmacists' perceptions of the educational value of community pharmacy residency programs (CPRPs) and to compare student pharmacists' perceptions of the educational value of CPRPs and health-system residency programs (HSRPs). A self-administered online survey was sent to administrators at 119 Accreditation Council for Pharmacy Education-accredited schools of pharmacy for ultimate distribution to penultimate- and final-year student pharmacists. The survey included demographic measures and a 20-item residency program "perceived value of skill development" scale developed for this study. 1,722 completed surveys were received and analyzed. Penultimate-year students attributed greater value to CPRPs more frequently than final-year students. Students more often attributed higher value to CPRPs for skills related to business management, practice management, and medication therapy management, while they attributed higher value to HSRPs for skills related to teaching, research, and clinical knowledge. The results of this study suggest students' perceived value of CPRPs may be related to their year of pharmacy school and the pharmacy practice skill in question.

Technical note: Relating functional group measurements to carbon types for improved model-measurement comparisons of organic aerosol composition

NASA Astrophysics Data System (ADS)

Takahama, Satoshi; Ruggeri, Giulia

2017-04-01

Functional group (FG) analysis provides a means by which functionalization in organic aerosol can be attributed to the abundances of its underlying molecular structures. However, performing this attribution requires additional, unobserved details about the molecular mixture to provide constraints in the estimation process. We present an approach for conceptualizing FG measurements of organic aerosol in terms of its functionalized carbon atoms. This reformulation facilitates estimation of mass recovery and biases in popular carbon-centric metrics that describe the extent of functionalization (such as oxygen to carbon ratio, organic mass to organic carbon mass ratio, and mean carbon oxidation state) for any given set of molecules and FGs analyzed. Furthermore, this approach allows development of parameterizations to more precisely estimate the organic carbon content from measured FG abundance. We use simulated photooxidation products of α-pinene secondary organic aerosol previously reported by Ruggeri et al. (2016) and FG measurements by Fourier transform infrared (FT-IR) spectroscopy in chamber experiments by Sax et al. (2005) to infer the relationships among molecular composition, FG composition, and metrics of organic aerosol functionalization. We find that for this simulated system, ˜ 80 % of the carbon atoms should be detected by FGs for which calibration models are commonly developed, and ˜ 7 % of the carbon atoms are undetectable by FT-IR analysis because they are not associated with vibrational modes in the infrared. Estimated biases due to undetected carbon fraction for these simulations are used to make adjustments in these carbon-centric metrics such that model-measurement differences are framed in terms of unmeasured heteroatoms (e.g., in hydroperoxide and nitrate groups for the case studied in this demonstration). The formality of this method provides framework for extending FG analysis to not only model-measurement but also instrument intercomparisons in other chemical systems.

Requirements for benchmarking personal image retrieval systems

NASA Astrophysics Data System (ADS)

Bouguet, Jean-Yves; Dulong, Carole; Kozintsev, Igor; Wu, Yi

2006-01-01

It is now common to have accumulated tens of thousands of personal ictures. Efficient access to that many pictures can only be done with a robust image retrieval system. This application is of high interest to Intel processor architects. It is highly compute intensive, and could motivate end users to upgrade their personal computers to the next generations of processors. A key question is how to assess the robustness of a personal image retrieval system. Personal image databases are very different from digital libraries that have been used by many Content Based Image Retrieval Systems.1 For example a personal image database has a lot of pictures of people, but a small set of different people typically family, relatives, and friends. Pictures are taken in a limited set of places like home, work, school, and vacation destination. The most frequent queries are searched for people, and for places. These attributes, and many others affect how a personal image retrieval system should be benchmarked, and benchmarks need to be different from existing ones based on art images, or medical images for examples. The attributes of the data set do not change the list of components needed for the benchmarking of such systems as specified in2: - data sets - query tasks - ground truth - evaluation measures - benchmarking events. This paper proposed a way to build these components to be representative of personal image databases, and of the corresponding usage models.

Relationship between Attributional Errors and At-Risk Behaviors among Juvenile Delinquents.

ERIC Educational Resources Information Center

Daley, Christine E.; Onwuegbuzie, Anthony J.

The purpose of this study was to determine whether at-risk behaviors (e.g., substance abuse, gun ownership, sexual activity, and gang membership) are associated with violence attribution errors, as measured by Daley and Onwuegbuzie's (1995) Violence Attribution Survey, among 82 incarcerated male juvenile delinquents. Analysis revealed that the…

Attributional Bias Instrument (ABI): Validation of a Measure to Assess Ability and Effort Explanations for Math Performance

ERIC Educational Resources Information Center

Espinoza, Penelope P.; Quezada, Stephanie A.; Rincones, Rodolfo; Strobach, E. Natalia; Gutierrez, Maria Armida Estrada

2012-01-01

The present work investigates the validation of a newly developed instrument, the attributional bias instrument, based on achievement attribution theories that distinguish between effort and ability explanations of behavior. The instrument further incorporates the distinction between explanations for success versus failure in academic performance.…

A Study of the Relationship between Early Childhood Program Attributes and Early Childhood Reading Achievement

ERIC Educational Resources Information Center

Washington, Novella M.

2012-01-01

This quantitative correlational study focuses on the relationship between early childhood program attributes and early childhood reading success. Data will be gathered from early childhood sites with grades prekindergarten through second grade in which early childhood program attributes exist and early childhood reading is measured by the…

Appearance Idealization, Body Esteem, Causal Attributions, and Ethnic Variations in the Development of Obesity Stereotypes

ERIC Educational Resources Information Center

Klaczynski, Paul; Daniel, David B.; Keller, Peggy S.

2008-01-01

We explored the hypotheses that adolescents have more negative obesity stereotypes than children and that age differences in obesity stereotypes are mediated by weight attributions, body esteem, and appearance idealization. Hispanic- and Caucasian-American children completed measures of appearance idealization, body esteem, and attributions about…

Relationships between Attributional Style and Trait Anxiety for Preadolescent Australian Boys and Girls

ERIC Educational Resources Information Center

Khodayarifard, Mohammad; Anshel, Mark H.; Brinthaupt, Thomas M.

2006-01-01

This study examined relationships among components of attributional style and trait anxiety for 428 English-speaking boys and girls, grades 4-6, from primary public schools in New South Wales, Australia. Students completed general measures of attributional style and trait anxiety. Results showed a small but significant relationship between…

Noncognitive Skills in the Classroom: New Perspectives on Educational Research

ERIC Educational Resources Information Center

Rosen, Jeffrey A.; Glennie, Elizabeth J.; Dalton, Ben W.; Lennon, Jean M.; Bozick, Robert N.

2010-01-01

This book provides an overview of recent research on the relationship between noncognitive attributes (motivation, self efficacy, resilience) and academic outcomes (such as grades or test scores). The authors focus primarily on how these sets of attributes are measured and how they relate to important academic outcomes. Noncognitive attributes are…

Deficits in Social Attribution Ability in Prader-Willi Syndrome

ERIC Educational Resources Information Center

Koenig, Kathleen; Klin, Ami; Schultz, Robert

2004-01-01

Prader-Willi syndrome (PWS), a genetic form of mental retardation, involves a myriad of physical and behavioral problems. Poor social adjustment has been reported, but the origin of this difficulty is unknown. The Social Attribution Task, a measure of one's ability to make appropriate social attributions from an ambiguous visual display [Klin…

Identification of sensory attributes, instrumental and chemical measurements important for consumer acceptability of grilled lamb Longissimus lumborum.

PubMed

Oltra, O R; Farmer, L J; Gordon, A W; Moss, B W; Birnie, J; Devlin, D J; Tolland, E L C; Tollerton, I J; Beattie, A M; Kennedy, J T; Farrell, D

2015-02-01

In this study, important eating quality attributes that influence consumer liking for grilled lamb loin have been identified using preference mapping techniques. The eating quality attributes identified as driving the consumer liking of lamb loin steaks were “tenderness”, “sweet flavour”, “meaty aftertaste”, “roast lamb flavour” and “roast lamb aftertaste”. In contrast, the texture attribute “rubbery” and the flavour attributes “bitter flavour” and "bitter aftertaste" had a negative influence on consumer perceptions. Associations were observed between eating quality and a number of instrumental and chemical measurements. Warner Bratzler Shear Force showed an association with “rubbery” texture and a negative association with “tenderness” and consumer liking scores. The compounds, glucose, glucose-6-phosphate, inosine, inosine monophosphate and adenosine monophosphate were associated with the attributes, “sweet flavour”,“meaty aftertaste”, “roast lamb flavour”, “roast lamb aftertaste” and with consumer scores for liking of lamb which is probably caused by the role some of these compounds play as precursors of flavour and as taste compounds.

Physical And Medical Attributes Of Six Contemporary Noninvasive Imaging Techniques

NASA Astrophysics Data System (ADS)

Budinger, Thomas F.

1981-11-01

Digital subtraction angiography(DSA)is compared to five other noninvasive imaging methods with respect to physical attributes and medical applications. 1) Digital subtraction angiography measures flow channel (vessel) anatomy and vascular leaks in regions where signals from under and overlying vascular pools do not conflict in strength with the vessel or tissue of interest. 2) X-ray computed tomography, in principle, can separate the under and overlying signals, yet presently it is limited in speed, axial coverage, and computational burden for tasks DSA can efficiently perform. Possible exceptions are the dynamic spatial reconstructor (DSR) of Mayo Clinic and the system under construction at the University of California, San Francisco. 3) Heavy ion imaging measures electron density and is less sensitive to injected contrast than x-ray imaging which has the advantage of the photoelectric effect. A unique attribute of heavy ion imaging is its potential for treatment planning and the fact that beam hardening is not a physical problem. 4) Ultrasound detects surfaces, bulk tissue characteristics, and blood velocity. Doppler ultrasound competes with DSA in some regions of the body and generally involves less equipment and patient procedures. Ultrasound vessel imaging and range-gated Doppler have limitations due to sound absorption by atheromatous tissue and available imaging windows. 5) Emission tomography measures receptor site distribution, metabolism, permeability, and tissue perfusion. Resolution is limited to 7mm full width half maximum (FWHM) in the near future, and extraction of metabolic and perfusion information usually requires kinetic analyses with statistically poor data. The ability of positron tomography to measure metabolism (sugar, fatty acid, and oxygen utilization) and the ability to measure tissue perfusion with single photon tomography (17 mm FWHM) or PET (7 mm FWHM) using non-cyclotron produced radionuclides are the major unique features of emission tomography. 6) Nuclear magnetic resonance procedures measure the concentration of some nuclei (e.g., 1H, 23Na, 32P) as well as their chemical state and the local physical-chemical environment of the resolution volume. Velocity and diffusion are also potential measurements. Two unique capabilities of contemporary interest are the ability to image the spatial distribu-tion of relaxation parameters which give information about the local tissue characteristics, and the ability of NMR spectroscopy to sample (not image) the energy state of phosphorous in selected regions of the body. A third attribute of importance is that possible tissue heating seems to be the only hazard and this can be controlled.

DATA ATTRIBUTE RATING SYSTEM

EPA Science Inventory

The paper discusses a data attribute rating system (DARS), developed by EPA to assist in evaluating data associated with emission inventories. he paper presents DARS for evaluation by the potential user community. ARS was originally conceived as a method for evaluating country-sp...

Direct measurement of the effective infrared dielectric response of a highly doped semiconductor metamaterial.

PubMed

Al Mohtar, Abeer; Kazan, Michel; Taliercio, Thierry; Cerutti, Laurent; Blaize, Sylvain; Bruyant, Aurélien

2017-03-24

We have investigated the effective dielectric response of a subwavelength grating made of highly doped semiconductors (HDS) excited in reflection, using numerical simulations and spectroscopic measurement. The studied system can exhibit strong localized surface resonances and has, therefore, a great potential for surface-enhanced infrared absorption (SEIRA) spectroscopy application. It consists of a highly doped InAsSb grating deposited on lattice-matched GaSb. The numerical analysis demonstrated that the resonance frequencies can be inferred from the dielectric function of an equivalent homogeneous slab by accounting for the complex reflectivity of the composite layer. Fourier transform infrared reflectivity (FTIR) measurements, analyzed with the Kramers-Kronig conversion technique, were used to deduce the effective response in reflection of the investigated system. From the knowledge of this phenomenological dielectric function, transversal and longitudinal energy-loss functions were extracted and attributed to transverse and longitudinal resonance modes frequencies.

Interaction forces between DPPC bilayers on glass

PubMed Central

Orozco-Alcaraz, Raquel; Kuhl, Tonya L.

2013-01-01

The Surface Force Apparatus (SFA) was utilized to obtain force-distance profiles between silica supported membranes formed by Langmuir-Blodgett deposition of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). In the absence of a membrane, a long range electrostatic and short range steric repulsion is measured due to deprotonation of silica in water and roughness of the silica film. The electrostatic repulsion is partially screened by the lipid membrane and a van der Waals adhesion comparable to that measured with well packed DPPC membranes on mica is measured. This finding suggest that electrostatic interactions due to the underlying negatively charged silica are likely present in other systems of glass supported membranes. In contrast, the charge of an underlying mica substrate is almost completely screened when a lipid membrane is deposited on the mica. The difference in the two systems is attributed to stronger physisorption of zwitterionic lipids to molecularly smooth mica compared to rougher silica. PMID:23199333

Remote Sensing of Ecosystem Health: Opportunities, Challenges, and Future Perspectives

PubMed Central

Li, Zhaoqin; Xu, Dandan; Guo, Xulin

2014-01-01

Maintaining a healthy ecosystem is essential for maximizing sustainable ecological services of the best quality to human beings. Ecological and conservation research has provided a strong scientific background on identifying ecological health indicators and correspondingly making effective conservation plans. At the same time, ecologists have asserted a strong need for spatially explicit and temporally effective ecosystem health assessments based on remote sensing data. Currently, remote sensing of ecosystem health is only based on one ecosystem attribute: vigor, organization, or resilience. However, an effective ecosystem health assessment should be a comprehensive and dynamic measurement of the three attributes. This paper reviews opportunities of remote sensing, including optical, radar, and LiDAR, for directly estimating indicators of the three ecosystem attributes, discusses the main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system, and provides some future perspectives. The main challenges to develop a remote sensing-based spatially-explicit comprehensive ecosystem health system are: (1) scale issue; (2) transportability issue; (3) data availability; and (4) uncertainties in health indicators estimated from remote sensing data. However, the Radarsat-2 constellation, upcoming new optical sensors on Worldview-3 and Sentinel-2 satellites, and improved technologies for the acquisition and processing of hyperspectral, multi-angle optical, radar, and LiDAR data and multi-sensoral data fusion may partly address the current challenges. PMID:25386759

Privacy Protection on Multiple Sensitive Attributes

NASA Astrophysics Data System (ADS)

Li, Zhen; Ye, Xiaojun

In recent years, a privacy model called k-anonymity has gained popularity in the microdata releasing. As the microdata may contain multiple sensitive attributes about an individual, the protection of multiple sensitive attributes has become an important problem. Different from the existing models of single sensitive attribute, extra associations among multiple sensitive attributes should be invested. Two kinds of disclosure scenarios may happen because of logical associations. The Q&S Diversity is checked to prevent the foregoing disclosure risks, with an α Requirement definition used to ensure the diversity requirement. At last, a two-step greedy generalization algorithm is used to carry out the multiple sensitive attributes processing which deal with quasi-identifiers and sensitive attributes respectively. We reduce the overall distortion by the measure of Masking SA.

A Hearing-Based, Frequency Domain Sound Quality Model for Combined Aerodynamic and Power Transmission Response with Application to Rotorcraft Interior Noise

NASA Astrophysics Data System (ADS)

Sondkar, Pravin B.

The severity of combined aerodynamics and power transmission response in high-speed, high power density systems such as a rotorcraft is still a major cause of annoyance in spite of recent advancement in passive, semi-active and active control. With further increase in the capacity and power of this class of machinery systems, the acoustic noise levels are expected to increase even more. To achieve further improvements in sound quality, a more refined understanding of the factors and attributes controlling human perception is needed. In the case of rotorcraft systems, the perceived quality of the interior sound field is a major determining factor of passenger comfort. Traditionally, this sound quality factor is determined by measuring the response of a chosen set of juries who are asked to compare their qualitative reactions to two or more sounds based on their subjective impressions. This type of testing is very time-consuming, costly, often inconsistent, and not useful for practical design purposes. Furthermore, there is no known universal model for sound quality. The primary aim of this research is to achieve significant improvements in quantifying the sound quality of combined aerodynamic and power transmission response in high-speed, high power density machinery systems such as a rotorcraft by applying relevant objective measures related to the spectral characteristics of the sound field. Two models have been proposed in this dissertation research. First, a classical multivariate regression analysis model based on currently known sound quality metrics as well some new metrics derived in this study is presented. Even though the analysis resulted in the best possible multivariate model as a measure of the acoustic noise quality, it lacks incorporation of human judgment mechanism. The regression model can change depending on specific application, nature of the sounds and types of juries used in the study. Also, it predicts only the averaged preference scores and does not explain why two jury members differ in their judgment. To address the above shortcoming of applying regression analysis, a new human judgment model is proposed to further improve the ability to predict the degree of subjective annoyance. The human judgment model involves extraction of subjective attributes and their values using a proposed artificial jury processor. In this approach, a set of ear transfer functions are employed to compute the characteristics of sound pressure waves as perceived subjectively by human. The resulting basilar membrane displacement data from this proposed model is then applied to analyze the attribute values. Using this proposed human judgment model, the human judgment mechanism, which is highly sophisticated, will be examined. Since the human judgment model is essentially based on jury attributes that are not expected to change significantly with application or nature of the sound field, it gives a more common basis to evaluate sound quality. This model also attempts to explain the inter-juror differences in opinion, which is critical in understanding the variability in human response.

Estimating and validating harvesting system production through computer simulation

Treesearch

John E. Baumgras; Curt C. Hassler; Chris B. LeDoux

1993-01-01

A Ground Based Harvesting System Simulation model (GB-SIM) has been developed to estimate stump-to-truck production rates and multiproduct yields for conventional ground-based timber harvesting systems in Appalachian hardwood stands. Simulation results reflect inputs that define harvest site and timber stand attributes, wood utilization options, and key attributes of...

Users guide to the Most Similar Neighbor Imputation Program Version 2

Treesearch

Nicholas L. Crookston; Melinda Moeur; David Renner

2002-01-01

The Most Similar Neighbor (MSN, Moeur and Stage 1995) program is used to impute attributes measured on some sample units to sample units where they are not measured. In forestry applications, forest stands or vegetation polygons are examples of sample units. Attributes from detailed vegetation inventories are imputed to sample units where that information is not...

Panel Conditioning in a Longitudinal Study of Adolescents' Substance Use: Evidence from an Experiment

ERIC Educational Resources Information Center

Torche, Florencia; Warren, John Robert; Halpern-Manners, Andrew; Valenzuela, Eduardo

2012-01-01

Panel surveys are widely used in sociology to examine life-course trajectories and to assess causal effects. However, when using panel data researchers usually assume that the act of measuring respondents' attitudes and behaviors has no effect on the attributes being measured or on the accuracy of reports about those attributes. Evidence from…

Self-Perceptions on Sex-Typed Attributes and the Occupational Aspirations and Expectations of High School Females.

ERIC Educational Resources Information Center

Davis, Patricia C.; And Others

Relationships among high school females' self-perceptions on sex-stereotypic attributes and their occupational aspirations and expectations were investigated. Two measures were administered to, and data were collected from, 200 randomly selected females in grade 12 from a large urban school district. Occupational choice was measured by two…

Ventromedial prefrontal cortex lesions in humans eliminate implicit gender stereotyping.

PubMed

Milne, E; Grafman, J

2001-06-15

Patients with prefrontal cortex lesions and controls were administered an implicit association task (IAT) that measured the degree of association between male and female names and their stereotypical attributes of strength and weakness. They also completed three questionnaires measuring their explicit judgment regarding gender-related stereotypical attributes. There were no between-group differences on the explicit measures. On the IAT, patients with dorsolateral lesions and controls showed a strong association, whereas patients with ventromedial prefrontal cortex lesions had a significantly lower association, between the stereotypical attributes of men and women and their concepts of gender. This finding provides support for the hypothesis that patients with ventromedial prefrontal lesions have a deficit in automatically accessing certain aspects of overlearned associated social knowledge.

Determining root correspondence between previously and newly detected objects

DOEpatents

Paglieroni, David W.; Beer, N Reginald

2014-06-17

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

Team composition and chronic disease management within primary healthcare practices in eastern Ontario: an application of the Measuring Organizational Attributes of Primary Health Care Survey.

PubMed

Lukewich, Julia; Edge, Dana S; VanDenKerkhof, Elizabeth; Williamson, Tyler; Tranmer, Joan

2018-04-15

Various organizational-level attributes are being implemented in primary healthcare to improve healthcare delivery. There is a need to describe the distribution and nature of these attributes and explore differences across practices.AimThe aim of this study was to better understand organizational attributes of primary care teams, focusing specifically on team composition, nursing roles, and strategies that support chronic disease management. We employed a cross-sectional survey design. Team composition, nursing roles, availability of health services, and chronic disease management activities were described using the 'Measuring Organizational Attributes of Primary Health Care Survey.'FindingsA total of 76% (n=26 out of 34) of practice locations completed the survey, including family health teams (FHT; n=21) and community health centers (CHC; n=4). Nurse practitioners (NPs) and registered nurses (RNs) were the most common non-physician providers, and CHCs had a greater proportion of non-physician providers than FHTs. There was overlap in roles performed by NPs and RNs, and registered practical nurses engaged in fewer roles compared with NPs and RNs. A greater proportion of FHTs had systematic chronic disease management services for hypertension, depression and Alzheimer's disease compared with CHC practices. The 'Measuring Organizational Attributes of Primary Health Care Survey' was a useful tool to highlight variability in organizational attributes across PHC practices. Nurses are prominent within PHC practices, engaging in a wide range of roles related to chronic disease management, suggesting a need to better understand their contributions to patient care to optimize their roles.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanquist, Thomas F.; Mahy, Heidi A.; Morris, Fred A.

Understanding the issues surrounding public acceptance of homeland security systems is important for balancing security needs and potential civil liberties infringements. A psychometric survey was used to measure attitudes regarding homeland security systems. Psychometric rating data were obtained from 182 respondents on psychological attributes associated with 12 distinct types of homeland security systems. An inverse relationship was observed for the overall rating attributes of acceptability and risk of civil liberties infringement. Principal components analysis yielded a two factor solution, with the rating scale loading pattern suggesting factors of Perceived Effectiveness and Perceived Intrusiveness. These factors also showed an inverse relationship.more » The 12 different homeland security systems showed significantly different scores on the rating scales and PCA factors, which were used to rank the systems in terms of overall acceptability. Difference scores for the rating scales and PCA factors were used to compute a single acceptability value reflecting the relative weight of risks and benefits. Of the 12 systems studied, airport screening, canine detectors and radiation monitoring at borders were found to be relatively acceptable, i.e., the perceived benefits for homeland security outweighed the perceived risks to civil liberties. Students rated several systems as more effective than professionals, but the overall pattern of results for both types of subjects was similar. The data suggest that risk perception research and the psychometric paradigm are useful approaches for quantifying attitudes regarding homeland security systems and policies, and can be used to anticipate potentially significant public acceptance issues.« less

Cost and schedule management on the quiet short-haul research aircraft project

NASA Technical Reports Server (NTRS)

Wilcox, D. E.; Patterakis, P.

1979-01-01

The Quiet Short-Haul Research Aircraft (QSRA) Project, one of the largest aeronautical programs undertaken by NASA to date, achieved a significant cost underrun. This is attributed to numerous factors, not the least of which were the contractual arrangement and the system of cost and schedule management employed by the contractor. This paper summarizes that system and the methods used for cost/performance measurement by the contractor and by the NASA project management. Recommendations are made for the use of some of these concepts in particular for future programs of a similar nature.

A Framework for Usability Evaluation in EHR Procurement.

PubMed

Tyllinen, Mari; Kaipio, Johanna; Lääveri, Tinja

2018-01-01

Usability should be considered already by the procuring organizations when selecting future systems. In this paper, we present a framework for usability evaluation during electronic health record (EHR) system procurement. We describe the objectives of the evaluation, the procedure, selected usability attributes and the evaluation methods to measure them. We also present the emphasis usability had in the selection process. We do not elaborate on the details of the results, the application of methods or gathering of data. Instead we focus on the components of the framework to inform and give an example to other similar procurement projects.

Measurement of Sexual Health in the U.S.: An Inventory of Nationally Representative Surveys and Surveillance Systems

PubMed Central

Ivankovich, Megan B.; Leichliter, Jami S.; Douglas, John M.

2013-01-01

Objectives To identify opportunities within nationally representative surveys and surveillance systems to measure indicators of sexual health, we reviewed and inventoried existing data systems that include variables relevant to sexual health. Methods We searched for U.S. nationally representative surveys and surveillance systems that provided individual-level sexual health data. We assessed the methods of each data system and catalogued them by their measurement of the following domains of sexual health: knowledge, communication, attitudes, service access and utilization, sexual behaviors, relationships, and adverse health outcomes. Results We identified 18 U.S.-focused, nationally representative data systems: six assessing the general population, seven focused on special populations, and five addressing health outcomes. While these data systems provide a rich repository of information from which to assess national measures of sexual health, they present several limitations. Most importantly, apart from data on service utilization, routinely gathered, national data are currently focused primarily on negative aspects of sexual health (e.g., risk behaviors and adverse health outcomes) rather than more positive attributes (e.g., healthy communication and attitudes, and relationship quality). Conclusion Nationally representative data systems provide opportunities to measure a broad array of domains of sexual health. However, current measurement gaps indicate the need to modify existing surveys, where feasible and appropriate, and develop new tools to include additional indicators that address positive domains of sexual health of the U.S. population across the life span. Such data can inform the development of effective policy actions, services, prevention programs, and resource allocation to advance sexual health. PMID:23450886

Experimental validation of the Helmoltz equation for the surface potential of Langmuir monolayers

NASA Astrophysics Data System (ADS)

El Abed, Abdel I.

2009-10-01

We show in this paper that monolayers of the nonhydrophilic F8H18 semifluorinated n -alkane constitute when spread on the hydrophobic top of an alamethicin Langmuir monolayer, a very good experimental system in order to check the validity of Helmoltz equation. This system allows for a good agreement between measured and calculated surface potentials of unionized Langmuir monolayers. We show also that the relative dielectric constant of the F8H18 monolayer does not vary upon compression of the monolayer, the measured 2.9 value is in a very good agreement with literature data. We attribute this behavior to the self-aggregation of F8H18 molecules in nanosized circular domains whose size remains constant upon compression as shown by atomic force microscopy.

Cloud draft structure and trace gas transport

NASA Technical Reports Server (NTRS)

Scala, John R.; Tao, Wei-Kuo; Thompson, Anne M.; Simpson, Joanne; Garstang, Michael; Pickering, Kenneth E.; Browell, Edward V.; Sachse, Glen W.; Gregory, Gerald L.; Torres, Arnold L.

1990-01-01

During the second Amazon Boundary Layer Experiment (ABLE 2B), meteorological observations, chemical measurements, and model simulations are utilized in order to interpret convective cloud draft structure and to analyze its role in transport and vertical distribution of trace gases. One-dimensional photochemical model results suggest that the observed poststorm changes in ozone concentration can be attributed to convective transports rather than photochemical production and the results of a two-dimensional time-dependent cloud model simulation are presented for the May 6, 1987 squall system. The mesoscale convective system exhibited evidence of significant midlevel detrainment in addition to transports to anvil heights. Chemical measurements of O3 and CO obtained in the convective environment are used to predict photochemical production within the troposphere and to corroborate the cloud model results.

Effect of ammonia on the volatility of organic diacids.

PubMed

Paciga, Andrea L; Riipinen, Ilona; Pandis, Spyros N

2014-12-02

The effect of ammonia on the partitioning of two dicarboxylic acids, oxalic (C2) and adipic (C6) is determined. Measurements by a tandem differential mobility analysis system and a thermodenuder (TD-TDMA) system are used to estimate the saturation vapor pressure and enthalpy of vaporization of ammonium oxalate and adipate. Ammonia dramatically lowered the vapor pressure of oxalic acid, by several orders of magnitude, with an estimated vapor pressure of 1.7 ± 0.8 × 10(–6) Pa at 298 K. The vapor pressure of ammonium adipate was 2.5 ± 0.8 × 10(–5) Pa at 298 K, similar to that of adipic acid. These results suggest that the dominance of oxalate in diacid concentrations measured in ambient aerosol could be attributed to the salt formation with ammonia.

Challenges and strategies in applying performance measurement to federal public health programs.

PubMed

DeGroff, Amy; Schooley, Michael; Chapel, Thomas; Poister, Theodore H

2010-11-01

Performance measurement is widely accepted in public health as an important management tool supporting program improvement and accountability. However, several challenges impede developing and implementing performance measurement systems at the federal level, including the complexity of public health problems that reflect multiple determinants and involve outcomes that may take years to achieve, the decentralized and networked nature of public health program implementation, and the lack of reliable and consistent data sources and other issues related to measurement. All three of these challenges hinder the ability to attribute program results to specific public health program efforts. The purpose of this paper is to explore these issues in detail and offer potential solutions that support the development of robust and practical performance measures to meet the needs for program improvement and accountability. Adapting performance measurement to public health programs is both an evolving science and art. Through the strategies presented here, appropriate systems can be developed and monitored to support the production of meaningful data that will inform effective decision making at multiple levels. Published by Elsevier Ltd.

Financial burden is associated with worse health-related quality of life in adults with multiple endocrine neoplasia type 1.

PubMed

Peipert, Benjamin J; Goswami, Sneha; Helenowski, Irene; Yount, Susan E; Sturgeon, Cord

2017-12-01

Health-related quality of life and financial burden among patients with multiple endocrine neoplasia type 1 is poorly described. It is not known how financial burden influences health-related quality of life in this population. We hypothesized that the financial burden attributable to multiple endocrine neoplasia type 1 is associated with worse health-related quality of life. United States adults (≥18 years) with multiple endocrine neoplasia type 1 were recruited from the AMENSupport MEN online support group. Patient demographics, clinical characteristics, and financial burden were assessed via an online survey. The instrument Patient-Reported Outcomes Measurement Information System 29-item profile measure was used to assess health-related quality of life. Multivariable linear regression was used to identify significant variables in each Patient-Reported Outcomes Measurement Information System domain. Out of 1,378 members in AMENSupport, our survey link was accessed 449 times (33%). Of 153 US respondents who completed our survey, 84% reported financial burden attributable to multiple endocrine neoplasia type 1. The degree of financial burden had a linear relationship with worse health-related quality of life across all Patient-Reported Outcomes Measurement Information System domains (r = 0.36-0.55, P < .001); 63% reported experiencing ≥1 negative financial event(s). Borrowing money from friends/family (30%), unemployment (13%), and spending >$100/month out-of-pocket on prescription medications (46%) were associated consistently with impaired health-related quality of life (ß = 3.75-6.77, P < .05). Respondents were 3- and 34-times more likely to be unemployed and declare bankruptcy than the US population, respectively. This study characterizes the financial burden in patients with multiple endocrine neoplasia type 1. Individuals with multiple endocrine neoplasia type 1 report a high degree of financial burden, negative financial events, and unemployment. Each of these factors was associated with worse health-related quality of life. Copyright © 2017 Elsevier Inc. All rights reserved.

OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine

DOE PAGES

Robertson, Amy N.; Wendt, Fabian; Jonkman, Jason M.; ...

2017-10-01

This paper summarizes the findings from Phase II of the Offshore Code Comparison, Collaboration, Continued, with Correlation project. The project is run under the International Energy Agency Wind Research Task 30, and is focused on validating the tools used for modeling offshore wind systems through the comparison of simulated responses of select system designs to physical test data. Validation activities such as these lead to improvement of offshore wind modeling tools, which will enable the development of more innovative and cost-effective offshore wind designs. For Phase II of the project, numerical models of the DeepCwind floating semisubmersible wind system weremore » validated using measurement data from a 1/50th-scale validation campaign performed at the Maritime Research Institute Netherlands offshore wave basin. Validation of the models was performed by comparing the calculated ultimate and fatigue loads for eight different wave-only and combined wind/wave test cases against the measured data, after calibration was performed using free-decay, wind-only, and wave-only tests. The results show a decent estimation of both the ultimate and fatigue loads for the simulated results, but with a fairly consistent underestimation in the tower and upwind mooring line loads that can be attributed to an underestimation of wave-excitation forces outside the linear wave-excitation region, and the presence of broadband frequency excitation in the experimental measurements from wind. Participant results showed varied agreement with the experimental measurements based on the modeling approach used. Modeling attributes that enabled better agreement included: the use of a dynamic mooring model; wave stretching, or some other hydrodynamic modeling approach that excites frequencies outside the linear wave region; nonlinear wave kinematics models; and unsteady aerodynamics models. Also, it was observed that a Morison-only hydrodynamic modeling approach could create excessive pitch excitation and resulting tower loads in some frequency bands.« less

OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, Amy N.; Wendt, Fabian; Jonkman, Jason M.

This paper summarizes the findings from Phase II of the Offshore Code Comparison, Collaboration, Continued, with Correlation project. The project is run under the International Energy Agency Wind Research Task 30, and is focused on validating the tools used for modeling offshore wind systems through the comparison of simulated responses of select system designs to physical test data. Validation activities such as these lead to improvement of offshore wind modeling tools, which will enable the development of more innovative and cost-effective offshore wind designs. For Phase II of the project, numerical models of the DeepCwind floating semisubmersible wind system weremore » validated using measurement data from a 1/50th-scale validation campaign performed at the Maritime Research Institute Netherlands offshore wave basin. Validation of the models was performed by comparing the calculated ultimate and fatigue loads for eight different wave-only and combined wind/wave test cases against the measured data, after calibration was performed using free-decay, wind-only, and wave-only tests. The results show a decent estimation of both the ultimate and fatigue loads for the simulated results, but with a fairly consistent underestimation in the tower and upwind mooring line loads that can be attributed to an underestimation of wave-excitation forces outside the linear wave-excitation region, and the presence of broadband frequency excitation in the experimental measurements from wind. Participant results showed varied agreement with the experimental measurements based on the modeling approach used. Modeling attributes that enabled better agreement included: the use of a dynamic mooring model; wave stretching, or some other hydrodynamic modeling approach that excites frequencies outside the linear wave region; nonlinear wave kinematics models; and unsteady aerodynamics models. Also, it was observed that a Morison-only hydrodynamic modeling approach could create excessive pitch excitation and resulting tower loads in some frequency bands.« less

Self-regulated learning processes of medical students during an academic learning task.

PubMed

Gandomkar, Roghayeh; Mirzazadeh, Azim; Jalili, Mohammad; Yazdani, Kamran; Fata, Ladan; Sandars, John

2016-10-01

This study was designed to identify the self-regulated learning (SRL) processes of medical students during a biomedical science learning task and to examine the associations of the SRL processes with previous performance in biomedical science examinations and subsequent performance on a learning task. A sample of 76 Year 1 medical students were recruited based on their performance in biomedical science examinations and stratified into previous high and low performers. Participants were asked to complete a biomedical science learning task. Participants' SRL processes were assessed before (self-efficacy, goal setting and strategic planning), during (metacognitive monitoring) and after (causal attributions and adaptive inferences) their completion of the task using an SRL microanalytic interview. Descriptive statistics were used to analyse the means and frequencies of SRL processes. Univariate and multiple logistic regression analyses were conducted to examine the associations of SRL processes with previous examination performance and the learning task performance. Most participants (from 88.2% to 43.4%) reported task-specific processes for SRL measures. Students who exhibited higher self-efficacy (odds ratio [OR] 1.44, 95% confidence interval [CI] 1.09-1.90) and reported task-specific processes for metacognitive monitoring (OR 6.61, 95% CI 1.68-25.93) and causal attributions (OR 6.75, 95% CI 2.05-22.25) measures were more likely to be high previous performers. Multiple analysis revealed that similar SRL measures were associated with previous performance. The use of task-specific processes for causal attributions (OR 23.00, 95% CI 4.57-115.76) and adaptive inferences (OR 27.00, 95% CI 3.39-214.95) measures were associated with being a high learning task performer. In multiple analysis, only the causal attributions measure was associated with high learning task performance. Self-efficacy, metacognitive monitoring and causal attributions measures were associated positively with previous performance. Causal attributions and adaptive inferences measures were associated positively with learning task performance. These findings may inform remediation interventions in the early years of medical school training. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Literature Review of Associations among Attributes of Reported Drinking Water Disease Outbreaks

PubMed Central

Ligon, Grant; Bartram, Jamie

2016-01-01

Waterborne disease outbreaks attributed to various pathogens and drinking water system characteristics have adversely affected public health worldwide throughout recorded history. Data from drinking water disease outbreak (DWDO) reports of widely varying breadth and depth were synthesized to investigate associations between outbreak attributes and human health impacts. Among 1519 outbreaks described in 475 sources identified during review of the primarily peer-reviewed, English language literature, most occurred in the U.S., the U.K. and Canada (in descending order). The outbreaks are most frequently associated with pathogens of unknown etiology, groundwater and untreated systems, and catchment realm-associated deficiencies (i.e., contamination events). Relative frequencies of outbreaks by various attributes are comparable with those within other DWDO reviews, with water system size and treatment type likely driving most of the (often statistically-significant at p < 0.05) differences in outbreak frequency, case count and attack rate. Temporal analysis suggests that while implementation of surface (drinking) water management policies is associated with decreased disease burden, further strengthening of related policies is needed to address the remaining burden attributed to catchment and distribution realm-associated deficiencies and to groundwater viral and disinfection-only system outbreaks. PMID:27240387

Literature Review of Associations among Attributes of Reported Drinking Water Disease Outbreaks.

PubMed

Ligon, Grant; Bartram, Jamie

2016-05-27

Waterborne disease outbreaks attributed to various pathogens and drinking water system characteristics have adversely affected public health worldwide throughout recorded history. Data from drinking water disease outbreak (DWDO) reports of widely varying breadth and depth were synthesized to investigate associations between outbreak attributes and human health impacts. Among 1519 outbreaks described in 475 sources identified during review of the primarily peer-reviewed, English language literature, most occurred in the U.S., the U.K. and Canada (in descending order). The outbreaks are most frequently associated with pathogens of unknown etiology, groundwater and untreated systems, and catchment realm-associated deficiencies (i.e., contamination events). Relative frequencies of outbreaks by various attributes are comparable with those within other DWDO reviews, with water system size and treatment type likely driving most of the (often statistically-significant at p < 0.05) differences in outbreak frequency, case count and attack rate. Temporal analysis suggests that while implementation of surface (drinking) water management policies is associated with decreased disease burden, further strengthening of related policies is needed to address the remaining burden attributed to catchment and distribution realm-associated deficiencies and to groundwater viral and disinfection-only system outbreaks.

E-cigarettes, Hookah Pens and Vapes: Adolescent and Young Adult Perceptions of Electronic Nicotine Delivery Systems.

PubMed

Wagoner, Kimberly G; Cornacchione, Jennifer; Wiseman, Kimberly D; Teal, Randall; Moracco, Kathryn E; Sutfin, Erin L

2016-10-01

Most studies have assessed use of "e-cigarettes" or "electronic cigarettes," potentially excluding new electronic nicotine delivery systems (ENDS), such as e-hookahs and vape pens. Little is known about how adolescents and young adults perceive ENDS and if their perceptions vary by sub-type. We explored ENDS perceptions among these populations. Ten focus groups with 77 adolescents and young adults, ages 13-25, were conducted in spring 2014. Participants were users or susceptible nonusers of novel tobacco products. Focus group transcripts were coded for emergent themes. Participants reported positive ENDS attributes, including flavor variety; user control of nicotine content; and smoke trick facilitation. Negative attributes included different feel compared to combustible cigarettes, nicotine addiction potential, and no cue to stop use. Participants perceived less harm from ENDS compared to combustible cigarettes, perhaps due to marketing and lack of product regulation, but noted the uncertainty of ingredients in ENDS. Numerous terms were used to describe ENDS, including "e-cigarette," "e-hookah," "hookah pens," "tanks," and "vapes." Although no clear classification system emerged, participants used product characteristics like nicotine content and chargeability to attempt classification. Perceptions differed by product used. E-hookah users were perceived as young and trendy while e-cigarette users were perceived as old and addicted to nicotine. Young adults and adolescents report distinct ENDS sub-types with varying characteristics and social perceptions of users. Although they had more positive than negative perceptions of ENDS, prevention efforts should consider highlighting negative attributes as they may discourage use and product trial among young nonusers. Our study underscores the need for a standardized measurement system for ENDS sub-types and additional research on how ENDS sub-types are perceived among adolescents and young adults. In addition, our findings highlight negative product attributes reported by participants that may be useful in prevention and regulatory efforts to offset favorable marketing messages. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

E-cigarettes, Hookah Pens and Vapes: Adolescent and Young Adult Perceptions of Electronic Nicotine Delivery Systems

PubMed Central

Cornacchione, Jennifer; Wiseman, Kimberly D.; Teal, Randall; Moracco, Kathryn E.; Sutfin, Erin L.

2016-01-01

Introduction: Most studies have assessed use of “e-cigarettes” or “electronic cigarettes,” potentially excluding new electronic nicotine delivery systems (ENDS), such as e-hookahs and vape pens. Little is known about how adolescents and young adults perceive ENDS and if their perceptions vary by sub-type. We explored ENDS perceptions among these populations. Methods: Ten focus groups with 77 adolescents and young adults, ages 13–25, were conducted in spring 2014. Participants were users or susceptible nonusers of novel tobacco products. Focus group transcripts were coded for emergent themes. Results: Participants reported positive ENDS attributes, including flavor variety; user control of nicotine content; and smoke trick facilitation. Negative attributes included different feel compared to combustible cigarettes, nicotine addiction potential, and no cue to stop use. Participants perceived less harm from ENDS compared to combustible cigarettes, perhaps due to marketing and lack of product regulation, but noted the uncertainty of ingredients in ENDS. Numerous terms were used to describe ENDS, including “e-cigarette,” “e-hookah,” “hookah pens,” “tanks,” and “vapes.” Although no clear classification system emerged, participants used product characteristics like nicotine content and chargeability to attempt classification. Perceptions differed by product used. E-hookah users were perceived as young and trendy while e-cigarette users were perceived as old and addicted to nicotine. Conclusions: Young adults and adolescents report distinct ENDS sub-types with varying characteristics and social perceptions of users. Although they had more positive than negative perceptions of ENDS, prevention efforts should consider highlighting negative attributes as they may discourage use and product trial among young nonusers. Implications: Our study underscores the need for a standardized measurement system for ENDS sub-types and additional research on how ENDS sub-types are perceived among adolescents and young adults. In addition, our findings highlight negative product attributes reported by participants that may be useful in prevention and regulatory efforts to offset favorable marketing messages. PMID:27029821

A note on contagion indices for landscape analysis

Treesearch

Kurt H. Riitters; Robert V. O' Neill; James D. Wickham; K. Bruce Jones

1996-01-01

The landscape contagion index measures the degree of clumping of attributes on raster maps. The index is computed from the frequencies by which different pairs of attributes occur as adjacent pixels on a map. Because there are subtle differences in the way the attribute adjacencies may be tabulated, the standard index formula may not always apply, and published index...

I Think, Therefore I Am: A Twin Study of Attributional Style in Adolescents

ERIC Educational Resources Information Center

Lau, Jennifer Y. F.; Rijsdijk, Fruhling; Eley, Thalia C.

2006-01-01

Background: Parenting factors may be important to the development of attributional style in adolescence, which in turn relates to depression symptoms. These relationships have mainly been considered in terms of social risk mechanisms, and little is known about the role of genetic influences. Method: Self-reported measures of attributional style,…

The Impact of Q-Matrix Designs on Diagnostic Classification Accuracy in the Presence of Attribute Hierarchies

ERIC Educational Resources Information Center

Liu, Ren; Huggins-Manley, Anne Corinne; Bradshaw, Laine

2017-01-01

There is an increasing demand for assessments that can provide more fine-grained information about examinees. In response to the demand, diagnostic measurement provides students with feedback on their strengths and weaknesses on specific skills by classifying them into mastery or nonmastery attribute categories. These attributes often form a…

Neural Correlates of Belief and Emotion Attribution in Schizophrenia

PubMed Central

Lee, Junghee; Horan, William P.; Wynn, Jonathan K.; Green, Michael F.

2016-01-01

Impaired mental state attribution is a core social cognitive deficit in schizophrenia. With functional magnetic resonance imaging (fMRI), this study examined the extent to which the core neural system of mental state attribution is involved in mental state attribution, focusing on belief attribution and emotion attribution. Fifteen schizophrenia outpatients and 14 healthy controls performed two mental state attribution tasks in the scanner. In a Belief Attribution Task, after reading a short vignette, participants were asked infer either the belief of a character (a false belief condition) or a physical state of an affair (a false photograph condition). In an Emotion Attribution Task, participants were asked either to judge whether character(s) in pictures felt unpleasant, pleasant, or neutral emotion (other condition) or to look at pictures that did not have any human characters (view condition). fMRI data were analyzing focusing on a priori regions of interest (ROIs) of the core neural systems of mental state attribution: the medial prefrontal cortex (mPFC), temporoparietal junction (TPJ) and precuneus. An exploratory whole brain analysis was also performed. Both patients and controls showed greater activation in all four ROIs during the Belief Attribution Task than the Emotion Attribution Task. Patients also showed less activation in the precuneus and left TPJ compared to controls during the Belief Attribution Task. No significant group difference was found during the Emotion Attribution Task in any of ROIs. An exploratory whole brain analysis showed a similar pattern of neural activations. These findings suggest that while schizophrenia patients rely on the same neural network as controls do when attributing beliefs of others, patients did not show reduced activation in the key regions such as the TPJ. Further, this study did not find evidence for aberrant neural activation during emotion attribution or recruitment of compensatory brain regions in schizophrenia. PMID:27812142

Changing drivers' minds: the evaluation of an advanced driver coaching system.

PubMed

Stanton, N A; Walker, G H; Young, M S; Kazi, T; Salmon, P M

2007-08-01

This paper reports on the study of an advanced driver coaching system. The study distinguishes between different types of post-licensure programmes in order to explore a system based on a model of identifying and responding to hazards, called 'information, position, speed, gear and acceleration' (IPSGA). Previous literature has been sceptical about the benefits of advanced driver education; thus, the current study was designed to control for the effects of coaching drivers in the 'IPSGA' system (the treatment group) against the effects of being accompanied (control group 1), as well as the mere effects of time (control group 2). Measures were taken before the driver coaching began (as a baseline measure) and again after 8 weeks (to see if any changes had occurred). These measures included driver knowledge via a post-drive interview, observations of driving skill and driver attitude using a locus of control scale. The results suggest that advanced driver coaching using the IPSGA system had a beneficial effect on all of these measures. Drivers in the coaching condition improved their situation awareness, driving skills and reduced attributions of external locus of control. The study lends support to the case for one-to-one individualized driver coaching using a systematic model of driving.

Seismic data are rich in information about subsurface formations and fluids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farfour, Mohammed; Yoon, Wang Jung; Kim, Dongshin

2016-06-08

Seismic attributes are defined as any measured or computed information derived from seismic data. Throughout the last decades extensive work has been done in developing variety of mathematical approaches to extract maximum information from seismic data. Nevertheless, geoscientists found that seismic is still mature and rich in information. In this paper a new seismic attribute is introduced. Instantaneous energy seismic attribute is an amplitude based attribute that has the potential to emphasize anomalous amplitude associated with hydrocarbons. Promising results have been obtained from applying the attribute on seismic section traversing hydrocarbon filled sand from Alberta, Canada.

Measuring and managing health system performance: An update from New Zealand.

PubMed

Chalmers, Linda Maree; Ashton, Toni; Tenbensel, Tim

2017-08-01

In July 2016, New Zealand introduced a new approach to measuring and monitoring health system performance. This 'Systems Level Measure Framework' (SLMF) has evolved from the Integrated Performance and Incentive Framework (IPIF) previously reported in this journal. The SLMF is designed to stimulate a 'whole of system' approach that requires inter-organisational collaboration. Local 'Alliances' between government and non-government health sector organisations are responsible for planning and achieving improved health system outcomes such as reducing ambulatory sensitive hospitalisation for young children, and reducing acute hospital bed days. It marks a shift from the previous regime of output and process targets, and from a pay-for-performance approach to primary care. Some elements of the earlier IPIF proposal, such as general practice quality measures, and tiered levels of performance, were not included in the SLM framework. The focus on health system outcomes demonstrates policy commitment to effective integration of health services. However, there remain considerable challenges to successful implementation. An outcomes framework makes it challenging to attribute changes in outcomes to organisational and collaborative strategies. At the local level, the strength and functioning of collaborative relationships between organisations vary considerably. The extent and pace of change may also be constrained by existing funding arrangements in the health system. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Inorganic carbon and oxygen dynamics in a marsh‐dominated estuary

PubMed Central

Di Iorio, Daniela; Cai, Wei‐Jun; Hopkinson, Charles S.

2017-01-01

Abstract We conducted a free‐water mass balance‐based study to address the rate of metabolism and net carbon exchange for the tidal wetland and estuarine portion of the coastal ocean and the uncertainties associated with this approach were assessed. We measured open water diurnal O2 and dissolved inorganic carbon (DIC) dynamics seasonally in a salt marsh‐estuary in Georgia, U.S.A. with a focus on the marsh‐estuary linkage associated with tidal flooding. We observed that the overall estuarine system was a net source of CO2 to the atmosphere and coastal ocean and a net sink for oceanic and atmospheric O2. Rates of metabolism were extremely high, with respiration (43 mol m−2 yr−1) greatly exceeding gross primary production (28 mol m−2 yr−1), such that the overall system was net heterotrophic. Metabolism measured with DIC were higher than with O2, which we attribute to high rates of anaerobic respiration and reduced sulfur storage in salt marsh sediments, and we assume substantial levels of anoxygenic photosynthesis. We found gas exchange from a flooded marsh is substantial, accounting for about 28% of total O2 and CO2 air–water exchange. A significant percentage of the overall estuarine aquatic metabolism is attributable to metabolism of marsh organisms during inundation. Our study suggests not rely on oceanographic stoichiometry to convert from O2 to C based measurements when constructing C balances for the coastal ocean. We also suggest eddy covariance measurements of salt marsh net ecosystem exchange underestimate net ecosystem production as they do not account for lateral DIC exchange associated with marsh tidal inundation. PMID:29456267

Maternal Attributions of Infant Behavior and Parenting in Toddlerhood Predict Teacher-Rated Internalizing Problems in Childhood.

PubMed

Wagner, Nicholas J; Gueron-Sela, Noa; Bedford, Rachael; Propper, Cathi

2018-06-12

Social-information-processing theories of parenting posit that parents' beliefs and attributions about their children's behaviors contribute to how parents interact with their children. The purpose of this study was to examine the associations between negative parenting attributions in infancy, harsh-intrusive parenting in toddlerhood, and children's internalizing problems (IPs) in early childhood. Using data from a diverse longitudinal study (n = 206), the current study used a structural equation modeling approach to test if mothers' negative attributions measured at 6 months predicted teacher ratings of children's IPs in 1st grade, as well as the extent to which observed harsh-intrusive parenting behaviors measured at ages 1, 2, and 3 years mediated this link. Maternal negative attributions in infancy predict more IPs in 1st grade, but this link becomes nonsignificant when observed harsh-intrusive parenting is included as a mediator. A significant indirect effect suggests that harsh-intrusive parenting mediates the association between early negative attributions and eventual IPs. Findings from this study identify harsh-intrusive parenting behaviors as one potential mechanism through which the effects of early attributions are carried forward to influence children's IPs. The developmental and clinical implications of these findings are discussed.

Underlying construct of empathy, optimism, and burnout in medical students.

PubMed

Hojat, Mohammadreza; Vergare, Michael; Isenberg, Gerald; Cohen, Mitchell; Spandorfer, John

2015-01-29

This study was designed to explore the underlying construct of measures of empathy, optimism, and burnout in medical students. Three instruments for measuring empathy (Jefferson Scale of Empathy, JSE); Optimism (the Life Orientation Test-Revised, LOT-R); and burnout (the Maslach Burnout Inventory, MBI, which includes three scales of Emotional Exhaustion, Depersonalization, and Personal Accomplishment) were administered to 265 third-year students at Sidney Kimmel (formerly Jefferson) Medical College at Thomas Jefferson University. Data were subjected to factor analysis to examine relationships among measures of empathy, optimism, and burnout in a multivariate statistical model. Factor analysis (principal component with oblique rotation) resulted in two underlying constructs, each with an eigenvalue greater than one. The first factor involved "positive personality attributes" (factor coefficients greater than .58 for measures of empathy, optimism, and personal accomplishment). The second factor involved "negative personality attributes" (factor coefficients greater than .78 for measures of emotional exhaustion, and depersonalization). Results confirmed that an association exists between empathy in the context of patient care and personality characteristics that are conducive to relationship building, and considered to be "positive personality attributes," as opposed to personality characteristics that are considered as "negative personality attributes" that are detrimental to interpersonal relationships. Implications for the professional development of physicians-in-training and in-practice are discussed.

Building a biomedical cyberinfrastructure for collaborative research.

PubMed

Schad, Peter A; Mobley, Lee Rivers; Hamilton, Carol M

2011-05-01

For the potential power of genome-wide association studies (GWAS) and translational medicine to be realized, the biomedical research community must adopt standard measures, vocabularies, and systems to establish an extensible biomedical cyberinfrastructure. Incorporating standard measures will greatly facilitate combining and comparing studies via meta-analysis. Incorporating consensus-based and well-established measures into various studies should reduce the variability across studies due to attributes of measurement, making findings across studies more comparable. This article describes two well-established consensus-based approaches to identifying standard measures and systems: PhenX (consensus measures for phenotypes and eXposures), and the Open Geospatial Consortium (OGC). NIH support for these efforts has produced the PhenX Toolkit, an assembled catalog of standard measures for use in GWAS and other large-scale genomic research efforts, and the RTI Spatial Impact Factor Database (SIFD), a comprehensive repository of geo-referenced variables and extensive meta-data that conforms to OGC standards. The need for coordinated development of cyberinfrastructure to support measures and systems that enhance collaboration and data interoperability is clear; this paper includes a discussion of standard protocols for ensuring data compatibility and interoperability. Adopting a cyberinfrastructure that includes standard measures and vocabularies, and open-source systems architecture, such as the two well-established systems discussed here, will enhance the potential of future biomedical and translational research. Establishing and maintaining the cyberinfrastructure will require a fundamental change in the way researchers think about study design, collaboration, and data storage and analysis. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

The six critical attributes of the next generation of quality management software systems.

PubMed

Clark, Kathleen

2011-07-01

Driven by both the need to meet regulatory requirements and a genuine desire to drive improved quality, quality management systems encompassing standard operating procedure, corrective and preventative actions and related processes have existed for many years, both in paper and electronic form. The impact of quality management systems on 'actual' quality, however, is often reported as far less than desired. A quality management software system that moves beyond formal forms-driven processes to include a true closed loop design, manage disparate processes across the enterprise, provide support for collaborative processes and deliver insight into the overall state of control has the potential to close the gap between simply accomplishing regulatory compliance and delivering measurable improvements in quality and efficiency.

An experimental detrending approach to attributing change of pan evaporation in comparison with the traditional partial differential method

NASA Astrophysics Data System (ADS)

Wang, Tingting; Sun, Fubao; Xia, Jun; Liu, Wenbin; Sang, Yanfang

2017-04-01

In predicting how droughts and hydrological cycles would change in a warming climate, change of atmospheric evaporative demand measured by pan evaporation (Epan) is one crucial element to be understood. Over the last decade, the derived partial differential (PD) form of the PenPan equation is a prevailing attribution approach to attributing changes to Epan worldwide. However, the independency among climatic variables required by the PD approach cannot be met using long term observations. Here we designed a series of numerical experiments to attribute changes of Epan over China by detrending each climatic variable, i.e., an experimental detrending approach, to address the inter-correlation among climate variables, and made comparison with the traditional PD method. The results show that the detrending approach is superior not only to a complicate system with multi-variables and mixing algorithm like aerodynamic component (Ep,A) and Epan, but also to a simple case like radiative component (Ep,R), when compared with traditional PD method. The major reason for this is the strong and significant inter-correlation of input meteorological forcing. Very similar and fine attributing results have been achieved based on detrending approach and PD method after eliminating the inter-correlation of input through a randomize approach. The contribution of Rh and Ta in net radiation and thus Ep,R, which has been overlooked based on the PD method but successfully detected by detrending approach, provides some explanation to the comparing results. We adopted the control run from the detrending approach and applied it to made adjustment of PD method. Much improvement has been made and thus proven this adjustment an effective way in attributing changes to Epan. Hence, the detrending approach and the adjusted PD method are well recommended in attributing changes in hydrological models to better understand and predict water and energy cycle.

Recreational preferences of urban teenagers: the influence of cultural and environmental attributes

Treesearch

George L. Peterson

1977-01-01

The study tests the hypothesis that the recreational preferences of urban teenagers differ with age, sex, ethnicity, and measurable attributes of activity and environment. Photos of activities are used to measure preferences, and the photos are scaled for content by a detailed appraisal. The results show that sex and ethnicity modify the preference process, and that...

Online Multitasking Line-Scan Imaging Techniques for Simultaneous Safety and Quality Evaluation of Apples

NASA Astrophysics Data System (ADS)

Kim, Moon Sung; Lee, Kangjin; Chao, Kaunglin; Lefcourt, Alan; Cho, Byung-Kwan; Jun, Won

We developed a push-broom, line-scan imaging system capable of simultaneous measurements of reflectance and fluorescence. The system allows multitasking inspections for quality and safety attributes of apples due to its dynamic capabilities in simultaneously capturing fluorescence and reflectance, and selectivity in multispectral bands. A multitasking image-based inspection system for online applications has been suggested in that a single imaging device that could perform a multitude of both safety and quality inspection needs. The presented multitask inspection approach in online applications may provide an economically viable means for a number of food processing industries being able to adapt to operate and meet the dynamic and specific inspection and sorting needs.

Data rate enhancement of optical camera communications by compensating inter-frame gaps

NASA Astrophysics Data System (ADS)

Nguyen, Duy Thong; Park, Youngil

2017-07-01

Optical camera communications (OCC) is a convenient way of transmitting data between LED lamps and image sensors that are included in most smart devices. Although many schemes have been suggested to increase the data rate of the OCC system, it is still much lower than that of the photodiode-based LiFi system. One major reason of this low data rate is attributed to the inter-frame gap (IFG) of image sensor system, that is, the time gap between consecutive image frames. In this paper, we propose a way to compensate for this IFG efficiently by an interleaved Hamming coding scheme. The proposed scheme is implemented and the performance is measured.

Perceived Attributes Predict Course Management System Adopter Status

ERIC Educational Resources Information Center

Keesee, Gayla S.; Shepard, MaryFriend

2011-01-01

This quantitative, nonexperimental study utilized Rogers's diffusion of innovation theory as the theoretical base to determine instructors' perceptions of the attributes (relative advantage, compatibility, complexity, trialability, observability) of the course management system used in order to predict adopter status. The study used a convenience…

Developing Standard Exercises and Statistics to Measure the Impact of Cyber Defenses

DTIC Science & Technology

2014-06-01

partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN CYBER SYSTEMS AND OPERATIONS from the NAVAL POSTGRADUATE...attributed to insurers’ lack of experience with a new kind of risk, combined with insufficient actuarial data hindering competitive pricing.” Thus, it is...event. This “lack of actuarial data,” as will be seen later, is not just missing in insurance models—it is indeed the missing piece in the cost

Phase Retrieval System for Assessing Diamond Turning and Optical Surface Defects

NASA Technical Reports Server (NTRS)

Dean, Bruce; Maldonado, Alex; Bolcar, Matthew

2011-01-01

An optical design is presented for a measurement system used to assess the impact of surface errors originating from diamond turning artifacts. Diamond turning artifacts are common by-products of optical surface shaping using the diamond turning process (a diamond-tipped cutting tool used in a lathe configuration). Assessing and evaluating the errors imparted by diamond turning (including other surface errors attributed to optical manufacturing techniques) can be problematic and generally requires the use of an optical interferometer. Commercial interferometers can be expensive when compared to the simple optical setup developed here, which is used in combination with an image-based sensing technique (phase retrieval). Phase retrieval is a general term used in optics to describe the estimation of optical imperfections or aberrations. This turnkey system uses only image-based data and has minimal hardware requirements. The system is straightforward to set up, easy to align, and can provide nanometer accuracy on the measurement of optical surface defects.

Diffusion of Small Sticky Nanoparticles in a Polymer Melt: A Dynamic Light Scattering Study

NASA Astrophysics Data System (ADS)

Carroll, Bobby; Bocharova, Vera; Cheng, Shiwang; Yamamoto, Umi; Kisliuk, Alex; Schweizer, Ken; Sokolov, Alexei

The study of dynamics in complex fluids such as polymers has gained a broad interest in advanced materials and biomedical applications. Of particular interest is the motion of nanoparticles in these systems, which influences the mechanical and structural properties of composite materials, properties of colloidal systems, and biochemical processes in biological systems. Theoretical work predicts a violation of Stokes-Einstein (SE) relationship for diffusion of small nanoparticles in strongly-entangled polymer melt systems, with diffusion of nanoparticles much faster than expected DSE. It is attributed to differences between local and macroscopic viscosity. In this study, the diffusion of nanoparticles in polymer melts below and above entanglement molecular weight is measured using dynamic light scattering. The measured results are compared with simulations that provide quantitative predictions for SE violations. Our results are two-fold: (1) diffusion at lower molecular weights is slower than expected DSE due to chain absorption; and (2) diffusion becomes much (20 times) faster than DSE, at higher entanglements due to a reduced local viscosity.

Determining the importance of fundamental hearing aid attributes.

PubMed

Meister, Hartmut; Lausberg, Isabel; Kiessling, Juergen; Walger, Martin; von Wedel, Hasso

2002-07-01

To determine the importance of fundamental hearing aid attributes and to elicit measures of satisfaction and dissatisfaction. A prospective study based on a survey using a decompositional approach of preference measurement (conjoint analysis). Ear, nose, and throat university hospitals in Cologne and Giessen; various branches of hearing aid dispensers. A random sample of 175 experienced hearing aid users aged 20 to 91 years (mean age, 61 yr) recruited at two different sites. Relative importance of different hearing aid attributes, satisfaction and dissatisfaction with hearing aid attributes. Of the six fundamental hearing aid attributes assessed by the hearing aid users, the two features concerning speech perception attained the highest relative importance (25% speech in quiet, 27% speech in noise). The remaining four attributes (sound quality, handling, feedback, localization) had significantly lower values in a narrow range of 10 to 12%. Comparison of different subgroups of hearing aid wearers based on sociodemographic and user-specific data revealed a large interindividual scatter of the preferences for the attributes. A similar examination with 25 clinicians revealed overestimation of the importance of the attributes commonly associated with problems. Moreover, examination of satisfaction showed that speech in noise was the most frequent source of dissatisfaction (30% of all statements), whereas the subjects were satisfied with speech in quiet. The results emphasize the high importance of attributes related to speech perception. Speech discrimination in noise was the most important but also the most frequent source of negative statements. This attribute will be the outstanding parameter of future developments. Appropriate handling becomes an important factor for elderly subjects. However, because of the large interindividual scatter of data, the preferences of different hearing aid users were hardly predictable, giving evidence of multifactorial influences.

Beef quality attributes: A systematic review of consumer perspectives.

PubMed

Henchion, Maeve M; McCarthy, Mary; Resconi, Virginia C

2017-06-01

Informed by quality theory, this systematic literature review seeks to determine the relative importance of beef quality attributes from a consumer perspective, considering search, experience and credence quality attributes. While little change is anticipated in consumer ranking of search and experience attributes in the future, movement is expected in terms of ranking within the credence category and also in terms of the ranking of credence attributes overall. This highlights an opportunity for quality assurance schemes (QAS) to become more consumer focused through including a wider range of credence attributes. To capitalise on this opportunity, the meat industry should actively anticipate new relevant credence attributes and researchers need to develop new or better methods to measure them. This review attempts to identify the most relevant quality attributes in beef that may be considered in future iterations of QAS, to increase consumer satisfaction and, potentially, to increase returns to industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

Secure Data Access Control for Fog Computing Based on Multi-Authority Attribute-Based Signcryption with Computation Outsourcing and Attribute Revocation.

PubMed

Xu, Qian; Tan, Chengxiang; Fan, Zhijie; Zhu, Wenye; Xiao, Ya; Cheng, Fujia

2018-05-17

Nowadays, fog computing provides computation, storage, and application services to end users in the Internet of Things. One of the major concerns in fog computing systems is how fine-grained access control can be imposed. As a logical combination of attribute-based encryption and attribute-based signature, Attribute-based Signcryption (ABSC) can provide confidentiality and anonymous authentication for sensitive data and is more efficient than traditional "encrypt-then-sign" or "sign-then-encrypt" strategy. Thus, ABSC is suitable for fine-grained access control in a semi-trusted cloud environment and is gaining more and more attention recently. However, in many existing ABSC systems, the computation cost required for the end users in signcryption and designcryption is linear with the complexity of signing and encryption access policy. Moreover, only a single authority that is responsible for attribute management and key generation exists in the previous proposed ABSC schemes, whereas in reality, mostly, different authorities monitor different attributes of the user. In this paper, we propose OMDAC-ABSC, a novel data access control scheme based on Ciphertext-Policy ABSC, to provide data confidentiality, fine-grained control, and anonymous authentication in a multi-authority fog computing system. The signcryption and designcryption overhead for the user is significantly reduced by outsourcing the undesirable computation operations to fog nodes. The proposed scheme is proven to be secure in the standard model and can provide attribute revocation and public verifiability. The security analysis, asymptotic complexity comparison, and implementation results indicate that our construction can balance the security goals with practical efficiency in computation.

Teething troubles?

PubMed

McIntyre, G T; McIntyre, G M

2002-03-09

The relationship between the eruption of the deciduous teeth and the general health of infants has been documented for over 5,000 years. A variety of physical disturbances (anything from minor upsets to potentially fatal illnesses) have historically been attributed to teething, however a number of recent publications have alluded to a clarification of some of the disputed features of teething. It is now accepted that the localised symptoms of teething vary between individuals, however, 'teething' continues to be an inappropriate diagnosis proffered by both healthcare professionals and lay people. Severe systemic upsets are unrelated to teething and, if present, the infant should be promptly referred to a physician for an accurate diagnosis and appropriate treatment. The treatment modalities used in teething have been diverse throughout the ages, frequently depending on the tenets of the medical profession and lay people, but now principally involve pain relief. This article examines the signs and symptoms frequently attributed to teething and their possible alternative causes. The contemporary principles of the management of teething are discussed, including supportive measures, the diverse range of available topical and systemic pharmacological preparations and the 'alternative' holistic therapies.

A New Distance Metric for Unsupervised Learning of Categorical Data.

PubMed

Jia, Hong; Cheung, Yiu-Ming; Liu, Jiming

2016-05-01

Distance metric is the basis of many learning algorithms, and its effectiveness usually has a significant influence on the learning results. In general, measuring distance for numerical data is a tractable task, but it could be a nontrivial problem for categorical data sets. This paper, therefore, presents a new distance metric for categorical data based on the characteristics of categorical values. In particular, the distance between two values from one attribute measured by this metric is determined by both the frequency probabilities of these two values and the values of other attributes that have high interdependence with the calculated one. Dynamic attribute weight is further designed to adjust the contribution of each attribute-distance to the distance between the whole data objects. Promising experimental results on different real data sets have shown the effectiveness of the proposed distance metric.

Attributional style as a mediator between parental abuse risk and child internalizing symptomatology.

PubMed

Rodriguez, Christina M

2006-05-01

This study examined a model wherein children's attributional style mediates the relationship between parental physical child-abuse risk and children's internalizing problems. Using structural equation modeling, three indices of abuse risk were selected (child abuse potential, physical discipline use, and dysfunctional parenting style) and two indices of children's internalizing problems (depression and anxiety). The sample included 75 parent-child dyads, in which parents reported on their abuse risk and children independently completed measures of depressive and anxious symptomatology and a measure on their attributional style. Findings supported the model that children's attributional style for positive events (but not negative events) partially mediated the relationship between abuse risk and internalizing symptoms, with significant direct and indirect effects of abuse risk on internalizing symptomatology. Future directions to continue evaluating additional mediators and other possible contextual variables are discussed.

Predicting forested catchment evapotranspiration and streamflow from stand sapwood area and Aridity Index

NASA Astrophysics Data System (ADS)

Lane, Patrick

2016-04-01

Estimating the water balance of ungauged catchments has been the subject of decades of research. An extension of the fundamental problem of estimating the hydrology is then understanding how do changes in catchment attributes affect the water balance component? This is a particular issue in forest hydrology where vegetation exerts such a strong influence on evapotranspiration (ET), and consequent streamflow (Q). Given the primacy of trees in the water balance, and the potential for change to species and density through logging, fire, pests and diseases and drought, methods that directly relate ET/Q to vegetation structure, species, and stand density are very powerful. Plot studies on tree water use routinely use sapwood area (SA) to calculate transpiration and upscale to the stand/catchment scale. Recent work in south eastern Australian forests have found stand-wide SA to be linearly correlated (R2 = 0.89) with long term mean annual loss (P-Q), and hence, long term mean annual catchment streamflow. Robust relationships can be built between basal area (BA), tree density and stand SA. BA and density are common forest inventory measurements. Until now, no research has related the fundamental stand attribute of SA to streamflow. The data sets include catchments that have been thinned and with varying age classes. Thus far these analyses have been for energy limited systems in wetter forest types. SA has proven to be a more robust biometric than leaf area index which varies seasonally. That long term ET/Q is correlated with vegetation conforms to the Budyko framework. Use of a downscaled (20 m) Aridity Index (AI) has shown distinct correlations with stand SA, and therefore T. Structural patterns at a the hillslope scale not only correlate with SA and T, but also with interception (I) and forest floor evaporation (Es). These correlations between AI and I and Es have given R2 > 0.8. The result of these studies suggest an ability to estimate mean annual ET fluxes at sub hillslope scale using mappable attributes (AI, forest inventory data). Advances in forest inventory techniques, including LiDAR, mean stand attributes can increasingly be mapped over large areas. If combined with process measurements, these mapped attributes provide a powerful platform for simple but robust modelling at the sub-hillslope scale, including exploring hinge points of stand vulnerability to the drier, hotter climate predicted for SE Australia where energy limited systems may face water limitation.

Tobacco Policies in Louisiana: Recommendations for Future Tobacco Control Investment from SimSmoke, a Policy Simulation Model.

PubMed

Levy, David; Fergus, Cristin; Rudov, Lindsey; McCormick-Ricket, Iben; Carton, Thomas

2016-02-01

Despite the presence of tobacco control policies, Louisiana continues to experience a high smoking burden and elevated smoking-attributable deaths. The SimSmoke model provides projections of these health outcomes in the face of existing and expanded (simulated) tobacco control polices. The SimSmoke model utilizes population data, smoking rates, and various tobacco control policy measures from Louisiana to predict smoking prevalence and smoking-attributable deaths. The model begins in 1993 and estimates are projected through 2054. The model is validated against existing Louisiana smoking prevalence data. The most powerful individual policy measure for reducing smoking prevalence is cigarette excise tax. However, a comprehensive cessation treatment policy is predicted to save the most lives. A combination of tobacco control policies provides the greatest reduction in smoking prevalence and smoking-attributable deaths. The existing Louisiana excise tax ranks as one of the lowest in the country and the legislature is against further increases. Alternative policy measures aimed at lowering prevalence and attributable deaths are: cessation treatments, comprehensive smoke-free policies, and limiting youth access. These three policies have a substantial effect on smoking prevalence and attributable deaths and are likely to encounter more favor in the Louisiana legislature than increasing the state excise tax.

Retrieving the unretrievable in electronic imaging systems: emotions, themes, and stories

NASA Astrophysics Data System (ADS)

Joergensen, Corinne

1999-05-01

New paradigms such as 'affective computing' and user-based research are extending the realm of facets traditionally addressed in IR systems. This paper builds on previous research reported to the electronic imaging community concerning the need to provide access to more abstract attributes of images than those currently amenable to a variety of content-based and text-based indexing techniques. Empirical research suggest that, for visual materials, in addition to standard bibliographic data and broad subject, and in addition to such visually perceptual attributes such as color, texture, shape, and position or focal point, additional access points such as themes, abstract concepts, emotions, stories, and 'people-related' information such as social status would be useful in image retrieval. More recent research demonstrates that similar results are also obtained with 'fine arts' images, which generally have no access provided for these types of attributes. Current efforts to match image attributes as revealed in empirical research with those addressed both in current textural and content-based indexing systems are discussed, as well as the need for new representations for image attributes and for collaboration among diverse communities of researchers.

Modeling relationships between catchment attributes and river water quality in southern catchments of the Caspian Sea.

PubMed

Hasani Sangani, Mohammad; Jabbarian Amiri, Bahman; Alizadeh Shabani, Afshin; Sakieh, Yousef; Ashrafi, Sohrab

2015-04-01

Increasing land utilization through diverse forms of human activities, such as agriculture, forestry, urban growth, and industrial development, has led to negative impacts on the water quality of rivers. To find out how catchment attributes, such as land use, hydrologic soil groups, and lithology, can affect water quality variables (Ca(2+), Mg(2+), Na(+), Cl(-), HCO 3 (-) , pH, TDS, EC, SAR), a spatio-statistical approach was applied to 23 catchments in southern basins of the Caspian Sea. All input data layers (digital maps of land use, soil, and lithology) were prepared using geographic information system (GIS) and spatial analysis. Relationships between water quality variables and catchment attributes were then examined by Spearman rank correlation tests and multiple linear regression. Stepwise approach-based multiple linear regressions were developed to examine the relationship between catchment attributes and water quality variables. The areas (%) of marl, tuff, or diorite, as well as those of good-quality rangeland and bare land had negative effects on all water quality variables, while those of basalt, forest land cover were found to contribute to improved river water quality. Moreover, lithological variables showed the greatest most potential for predicting the mean concentration values of water quality variables, and noting that measure of EC and TDS have inversely associated with area (%) of urban land use.

Executive and social-cognitive determinants of environmental dependency syndrome in behavioral frontotemporal dementia.

PubMed

Flanagan, Emma C; Lagarde, Julien; Hahn, Valérie; Guichart-Gomez, Elodie; Sarazin, Marie; Hornberger, Michael; Bertoux, Maxime

2018-05-01

Environmental dependency syndrome (EDS), including utilization (UB) and imitation (IB) behaviors, is often reported in behavioral variant frontotemporal dementia (bvFTD). These behaviors are commonly attributed to executive dysfunction. However, inconsistent associations between EDS and poor executive performance has led to an alternative "social hypothesis," instead implicating patients' misinterpretation of the examiner's intention. We investigated the possible explanatory cognitive mechanisms of EDS in bvFTD by relating UB and IB to performance on tests of executive functioning and theory of mind (ToM). This study analyzed retrospective data of 32 bvFTD patients. Data included scores of UB and IB, various executive measures, and ToM assessment using the faux pas test, from which we extracted a mental attribution score. Of the patients, 15.6% and 40.6% exhibited UB and IB, respectively. We conducted an automatic linear modeling analysis with executive and mental attribution measures as predictor variables, and UB and IB sequentially considered as target variables. ToM mental attribution score, visual abstraction and flexibility measures from the Wisconsin Card Sorting Test, and motor sequence performance significantly (corrected ps < .05) predicted IB. No executive or ToM measures significantly predicted UB. These findings reveal a complex interaction between executive dysfunction and mental attribution deficits influencing the prevalence of EDS in bvFTD. Further investigation is required to improve our understanding of the mechanisms underlying these behaviors. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

From measurements to metrics: PCA-based indicators of cyber anomaly

NASA Astrophysics Data System (ADS)

Ahmed, Farid; Johnson, Tommy; Tsui, Sonia

2012-06-01

We present a framework of the application of Principal Component Analysis (PCA) to automatically obtain meaningful metrics from intrusion detection measurements. In particular, we report the progress made in applying PCA to analyze the behavioral measurements of malware and provide some preliminary results in selecting dominant attributes from an arbitrary number of malware attributes. The results will be useful in formulating an optimal detection threshold in the principal component space, which can both validate and augment existing malware classifiers.

Provider Monitoring and Pay-for-Performance When Multiple Providers Affect Outcomes: An Application to Renal Dialysis

PubMed Central

Hirth, Richard A; Turenne, Marc N; Wheeler, John RC; Pan, Qing; Ma, Yu; Messana, Joseph M

2009-01-01

Objective To characterize the influence of dialysis facilities and nephrologists on resource use and patient outcomes in the dialysis population and to illustrate how such information can be used to inform payment system design. Data Sources Medicare claims for all hemodialysis patients for whom Medicare was the primary payer in 2004, combined with the Medicare Enrollment Database and the CMS Medical Evidence Form (CMS Form 2728), which is completed at onset of renal replacement therapy. Study Design Resource use (mainly drugs and laboratory tests) per dialysis session and two clinical outcomes (achieving targets for anemia management and dose of dialysis) were modeled at the patient level with random effects for nephrologist and dialysis facility, controlling for patient characteristics. Results For each measure, both the physician and the facility had significant effects. However, facilities were more influential than physicians, as measured by the standard deviation of the random effects. Conclusions The success of tools such as P4P and provider profiling relies upon the identification of providers most able to enhance efficiency and quality. This paper demonstrates a method for determining the extent to which variation in health care costs and quality of care can be attributed to physicians and institutional providers. Because variation in quality and cost attributable to facilities is consistently larger than that attributable to physicians, if provider profiling or financial incentives are targeted to only one type of provider, the facility appears to be the appropriate locus. PMID:19555398

Systems and Methods for Data Visualization Using Three-Dimensional Displays

NASA Technical Reports Server (NTRS)

Davidoff, Scott (Inventor); Djorgovski, Stanislav G. (Inventor); Estrada, Vicente (Inventor); Donalek, Ciro (Inventor)

2017-01-01

Data visualization systems and methods for generating 3D visualizations of a multidimensional data space are described. In one embodiment a 3D data visualization application directs a processing system to: load a set of multidimensional data points into a visualization table; create representations of a set of 3D objects corresponding to the set of data points; receive mappings of data dimensions to visualization attributes; determine the visualization attributes of the set of 3D objects based upon the selected mappings of data dimensions to 3D object attributes; update a visibility dimension in the visualization table for each of the plurality of 3D object to reflect the visibility of each 3D object based upon the selected mappings of data dimensions to visualization attributes; and interactively render 3D data visualizations of the 3D objects within the virtual space from viewpoints determined based upon received user input.

The Role of Negative Affect and Physiological Regulation in maternal attribution

PubMed Central

Wang, Zhe; Deater-Deckard, Kirby; Bell, Martha Ann

2016-01-01

SYNOPSIS Objective Mothers who attribute child misbehaviors to children’s intentions, and not to situational causes, show more hostile parenting behaviors. Why are some mothers more likely than others to make more hostile attributions (i.e., high intentional attributions and low situational attributions) when confronted with child challenging behaviors? We examined the relation between mothers’ perception of child challenging behaviors and their hostile attributions of child misbehaviors, with an emphasis on how maternal negative affect and resting vagal activity moderated this relation. Design 160 mothers of 3- to 7-year-old children reported their perceptions of child problem behaviors, their attributions regarding child misbehaviors, and their temperamental negative affect. Mothers’ respiratory sinus arrhythmia (RSA) was measured during resting state. Results Maternal perceptions of child challenging behaviors were positively related to hostile maternal attributions, and this relation was strongest in mothers with high negative affect and low resting RSA. Conclusions These findings indicate the importance of considering mothers’ affective and physiological attributes when examining social-cognitive processes in parenting. PMID:27667969

Anaphylaxis triggered by prick test with latex extract: a case report.

PubMed

Mendonça, Leonardo Oliveira; de Lima, Cynthia Mafra Fonseca; Macedo, Priscilla Rios Cordeiro; Cunha, Victor do Espirito Santo; Hahnstadt, Ruppert Ludwig; Kalil, Jorge; Galvão, Clóvis Eduardo Santos

2018-06-11

Adverse reactions associated with prick tests are rare but may be present as serious systemic reactions. A 38-year-old female nursing technician complained of three episodes of anaphylaxis in one year, all in the workplace. To investigate latex allergy, the patient underwent the prick test with latex, and immediately developed a rash, itchy skin, hoarseness, dyspnea and dry cough. Her condition improved promptly after appropriate measures were established for controlling her anaphylaxis. The skin test must be performed under medical supervision, since complications that can lead to life-threatening reactions, if support measures are not readily implemented, have been attributed to this test.

Correlates of non-concordance between perceived and objective measures of walkability.

PubMed

Gebel, Klaus; Bauman, Adrian; Owen, Neville

2009-04-01

Objective and self-reported physical environmental attributes have been related to physical activity. We examined the characteristics of adults who are resident in objectively identified high walkable neighborhoods but whose perceptions of neighborhood attributes are not concordant with objective attributes relating to high walkability. Neighborhood built-environment attributes relating to walkability (dwelling density, intersection density, land use mix, and net retail area) were determined objectively, using Geographic Information System databases; data on corresponding perceptions of local environment attributes (from the Neighborhood Environment Walkability Scale) were derived from a self-completion survey of a socially diverse sample of 2,650 adults aged 19 to 65. Objective and perceived walkability attributes were categorized using median splits, and correlates of non-concordance were determined using multiple logistic regression models. There was a fair overall agreement between objectively determined walkability and perceived walkability (Kappa = 0.35, 95% CI = 0.31-0.39). Among those resident in objectively assessed high walkable areas (n = 1,063), 32.1% perceived them to be low walkable; conversely, 32.7% (n = 1,021) resident in objectively determined low walkability areas perceived them to be high. For residents of objectively determined high walkable areas, the characteristics that differentiated those with perceptions of low walkability (non-concordant perceptions) from those with concordant perceptions of high walkability were: not being university-educated (OR = 1.47, 95% CI = 1.06-2.04); having lower household incomes (OR = 1.54, 95% CI = 1.09-2.17); being overweight (OR = 1.46, 95% CI = 1.03-2.07); and walking fewer days per week for transport (OR = 1.75, 95% CI = 1.11-2.70). Higher walking times and more positive cognitive variables were noted among participants who lived in a neighborhood with low walkability that was perceived as high compared to those who lived in a high walkable environment that was perceived as low walkable. Adults with lower educational attainment and lower incomes, who were overweight, or who were less physically active for transportation purposes, were more likely to misperceive their high walkable neighborhood as low walkable. There is the potential for physical activity promotion and persuasion strategies to address non-concordant perceptions, especially among those who live in high walkable environments but perceive them to be low and also among those who are socially disadvantaged and are less active. Perceptions of environmental attributes may be more strongly correlated with cognitive antecedents and with behavior than are objective measures.

Magnetic-Field-Response Measurement-Acquisition System

NASA Technical Reports Server (NTRS)

Woodward, Stanley E.; Shams, Qamar A.; Fox, Robert L.; Taylor, Bryant D.

2006-01-01

A measurement-acquisition system uses magnetic fields to power sensors and to acquire measurements from sensors. The system alleviates many shortcomings of traditional measurement-acquisition systems, which include a finite number of measurement channels, weight penalty associated with wires, use limited to a single type of measurement, wire degradation due to wear or chemical decay, and the logistics needed to add new sensors. Eliminating wiring for acquiring measurements can alleviate potential hazards associated with wires, such as damaged wires becoming ignition sources due to arcing. The sensors are designed as electrically passive inductive-capacitive or passive inductive-capacitive-resistive circuits that produce magnetic-field-responses. One or more electrical parameters (inductance, capacitance, and resistance) of each sensor can be variable and corresponds to a measured physical state of interest. The magnetic-field- response attributes (frequency, amplitude, and bandwidth) of the inductor correspond to the states of physical properties for which each sensor measures. For each sensor, the measurement-acquisition system produces a series of increasing magnetic-field harmonics within a frequency range dedicated to that sensor. For each harmonic, an antenna electrically coupled to an oscillating current (the frequency of which is that of the harmonic) produces an oscillating magnetic field. Faraday induction via the harmonic magnetic fields produces an electromotive force and therefore a current in the sensor. Once electrically active, the sensor produces its own harmonic magnetic field as the inductor stores and releases magnetic energy. The antenna of the measurement- acquisition system is switched from a transmitting to a receiving mode to acquire the magnetic-field response of the sensor. The rectified amplitude of the received response is compared to previous responses to prior transmitted harmonics, to ascertain if the measurement system has detected a response inflection. The "transmit-receive-compare" of sequential harmonics is repeated until the inflection is identified. The harmonic producing the amplitude inflection is the sensor resonant frequency. Resonant frequency and response amplitude are stored and then correlated to calibration data.

Measurement of skin dose from cone-beam computed tomography imaging.

PubMed

Akyalcin, Sercan; English, Jeryl D; Abramovitch, Kenneth M; Rong, Xiujiang J

2013-10-09

To measure surface skin dose from various cone-beam computed tomography (CBCT) scanners using point-dosimeters. A head anthropomorphic phantom was used with nanoDOT optically stimulated luminescence (OSL) dosimeters (Landauer Corp., Glenwood, IL) attached to various anatomic landmarks. The phantom was scanned using multiple exposure protocols for craniofacial evaluations in three different CBCT units and a conventional x-ray imaging system. The dosimeters were calibrated for each of the scan protocols on the different imaging systems. Peak skin dose and surface doses at the eye lens, thyroid, submandibular and parotid gland levels were measured. The measured skin doses ranged from 0.09 to 4.62 mGy depending on dosimeter positions and imaging systems. The average surface doses to the lens locations were ~4.0 mGy, well below the threshold for cataractogenesis (500 mGy). The results changed accordingly with x-ray tube output (mAs and kV) and also were sensitive to scan field of view (SFOV). As compared to the conventional panoramic and cephalometric imaging system, doses from all three CBCT systems were at least an order of magnitude higher. Peak skin dose and surface doses at the eye lens, thyroid, and salivary gland levels measured from the CBCT imaging systems were lower than the thresholds to induce deterministic effects. However, our findings do not justify the routine use of CBCT imaging in orthodontics considering the lifetime-attributable risk to the individual.

Measurement of skin dose from cone-beam computed tomography imaging

PubMed Central

2013-01-01

Objective To measure surface skin dose from various cone-beam computed tomography (CBCT) scanners using point-dosimeters. Materials & methods A head anthropomorphic phantom was used with nanoDOT optically stimulated luminescence (OSL) dosimeters (Landauer Corp., Glenwood, IL) attached to various anatomic landmarks. The phantom was scanned using multiple exposure protocols for craniofacial evaluations in three different CBCT units and a conventional x-ray imaging system. The dosimeters were calibrated for each of the scan protocols on the different imaging systems. Peak skin dose and surface doses at the eye lens, thyroid, submandibular and parotid gland levels were measured. Results The measured skin doses ranged from 0.09 to 4.62 mGy depending on dosimeter positions and imaging systems. The average surface doses to the lens locations were ~4.0 mGy, well below the threshold for cataractogenesis (500 mGy). The results changed accordingly with x-ray tube output (mAs and kV) and also were sensitive to scan field of view (SFOV). As compared to the conventional panoramic and cephalometric imaging system, doses from all three CBCT systems were at least an order of magnitude higher. Conclusions Peak skin dose and surface doses at the eye lens, thyroid, and salivary gland levels measured from the CBCT imaging systems were lower than the thresholds to induce deterministic effects. However, our findings do not justify the routine use of CBCT imaging in orthodontics considering the lifetime-attributable risk to the individual. PMID:24192155

GIS measured environmental correlates of active school transport: A systematic review of 14 studies

PubMed Central

2011-01-01

Background Emerging frameworks to examine active school transportation (AST) commonly emphasize the built environment (BE) as having an influence on travel mode decisions. Objective measures of BE attributes have been recommended for advancing knowledge about the influence of the BE on school travel mode choice. An updated systematic review on the relationships between GIS-measured BE attributes and AST is required to inform future research in this area. The objectives of this review are: i) to examine and summarize the relationships between objectively measured BE features and AST in children and adolescents and ii) to critically discuss GIS methodologies used in this context. Methods Six electronic databases, and websites were systematically searched, and reference lists were searched and screened to identify studies examining AST in students aged five to 18 and reporting GIS as an environmental measurement tool. Fourteen cross-sectional studies were identified. The analyses were classified in terms of density, diversity, and design and further differentiated by the measures used or environmental condition examined. Results Only distance was consistently found to be negatively associated with AST. Consistent findings of positive or negative associations were not found for land use mix, residential density, and intersection density. Potential modifiers of any relationship between these attributes and AST included age, school travel mode, route direction (e.g., to/from school), and trip-end (home or school). Methodological limitations included inconsistencies in geocoding, selection of study sites, buffer methods and the shape of zones (Modifiable Areal Unit Problem [MAUP]), the quality of road and pedestrian infrastructure data, and school route estimation. Conclusions The inconsistent use of spatial concepts limits the ability to draw conclusions about the relationship between objectively measured environmental attributes and AST. Future research should explore standardizing buffer size, assess the quality of street network datasets and, if necessary, customize existing datasets, and explore further attributes linked to safety. PMID:21545750

African American Children's Affective Attributions and Consequences Regarding Sociomoral Events

ERIC Educational Resources Information Center

Humphries, Marisha L.

2013-01-01

Research Findings: This study examined 56 young (prekindergarten through 2nd grade) urban-dwelling African American children's understanding of the affective attributions and consequences of 3 types of sociomoral rule systems: prosocial, active, and inhibitive morality. It also tested the relationship of affective attributions and consequences to…

Perceptions of Leadership Attributes of South Carolina Technical College Presidents

ERIC Educational Resources Information Center

McKenzie, Kevin Michael

2010-01-01

This study examined the leadership attributes perceived to be possessed by the presidents in South Carolina's Technical College System. The participants consisted of 16 presidents and 80 subordinates that were selected by the presidents. All participants were asked to complete the "Leader Attribute Inventory." Additionally, each…

Evaluation of new flux attribution methods for mapping N2O emissions at the landscape scale from EC measurements

NASA Astrophysics Data System (ADS)

Grossel, Agnes; Bureau, Jordan; Loubet, Benjamin; Laville, Patricia; Massad, Raia; Haas, Edwin; Butterbach-Bahl, Klaus; Guimbaud, Christophe; Hénault, Catherine

2017-04-01

The objective of this study was to develop and evaluate an attribution method based on a combination of Eddy Covariance (EC) and chamber measurements to map N2O emissions over a 3-km2 area of croplands and forests in France. During 2 months of spring 2015, N2O fluxes were measured (i) by EC at 15 m height and (ii) punctually with a mobile chamber at 16 places within 1-km of EC mast. The attribution method was based on coupling the EC measurements, information on footprints (Loubet et al., 20101) and emission ratios based on crops and fertilizations, calculated based on chamber measurements. The results were evaluated against an independent flux dataset measured by automatic chambers in a wheat field within the area. At the landscape scale, the method estimated a total emission of 114-271 kg N-N2O during the campaign. This new approach allowed estimating continuously N2O emission and better accounting for the spatial variability of N2O emission at the landscape scale.

Spectroscopic studies of Np(V) complexation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stout, B.E.

The complexation of Np(V) with aliphatic (oxalic, malonic, succinic, glutaric, and maleic) and aromatic (phthalic, pyromellitic, hemimellitic, trimellitic, and mellitic) polycarboxylic acids was studied by spectrophotometry at 1 M ionic strength (NaClO{sub 4}) and 23 C. For the aliphatic systems, the stability of the neptunyl complexes was found to decrease as the carbon chain length of the ligand increased which was attributed to an entropy effect. In polycarboxylate systems, the stability constant decreased in the order hemimellitate > mellitate > pyromellitate > trimellitate, phthalate. With the exception of hemimellitate, this trend follows the order of decreasing basicity of the ligand.more » After correction of the stability constant for statistical effects, the stability of the mellitate, pyromellitate, trimellitate, and phthalate complexes were approximately the same. The unexpected strength the hemimellitate complexation was attributed to an increase in electron density at the binding site from the non-chelating carboxylate group through induction. The complexation of phthalate, trimellitate and hemimellitate and mellitate were studied as a function of pH. Trimellitate and mellitate were found to form ML as well as ML complexes while for phthalate and hemimellitate only ML species were observed. The stability constants of the cation-cation complexes Np(V)-U(VI) and Np(V)-Np(V), measured at 6 M ionic strength (HClO{sub 4}) and 25 C, were found to be 2.45 {+-} 0.05 and 1.41 {+-} 0.14, respectively. The change in enthalpy for the Np(V)-U(VI) system as determined by the measurement of the stability constant as function of temperature was -14.3 {+-} 1.6 kJ/mol.« less

Personalized Recommendation of Learning Material Using Sequential Pattern Mining and Attribute Based Collaborative Filtering

ERIC Educational Resources Information Center

Salehi, Mojtaba; Nakhai Kamalabadi, Isa; Ghaznavi Ghoushchi, Mohammad Bagher

2014-01-01

Material recommender system is a significant part of e-learning systems for personalization and recommendation of appropriate materials to learners. However, in the existing recommendation algorithms, dynamic interests and multi-preference of learners and multidimensional-attribute of materials are not fully considered simultaneously. Moreover,…

Local connectome phenotypes predict social, health, and cognitive factors

PubMed Central

Powell, Michael A.; Garcia, Javier O.; Yeh, Fang-Cheng; Vettel, Jean M.

2018-01-01

The unique architecture of the human connectome is defined initially by genetics and subsequently sculpted over time with experience. Thus, similarities in predisposition and experience that lead to similarities in social, biological, and cognitive attributes should also be reflected in the local architecture of white matter fascicles. Here we employ a method known as local connectome fingerprinting that uses diffusion MRI to measure the fiber-wise characteristics of macroscopic white matter pathways throughout the brain. This fingerprinting approach was applied to a large sample (N = 841) of subjects from the Human Connectome Project, revealing a reliable degree of between-subject correlation in the local connectome fingerprints, with a relatively complex, low-dimensional substructure. Using a cross-validated, high-dimensional regression analysis approach, we derived local connectome phenotype (LCP) maps that could reliably predict a subset of subject attributes measured, including demographic, health, and cognitive measures. These LCP maps were highly specific to the attribute being predicted but also sensitive to correlations between attributes. Collectively, these results indicate that the local architecture of white matter fascicles reflects a meaningful portion of the variability shared between subjects along several dimensions. PMID:29911679

Local connectome phenotypes predict social, health, and cognitive factors.

PubMed

Powell, Michael A; Garcia, Javier O; Yeh, Fang-Cheng; Vettel, Jean M; Verstynen, Timothy

2018-01-01

The unique architecture of the human connectome is defined initially by genetics and subsequently sculpted over time with experience. Thus, similarities in predisposition and experience that lead to similarities in social, biological, and cognitive attributes should also be reflected in the local architecture of white matter fascicles. Here we employ a method known as local connectome fingerprinting that uses diffusion MRI to measure the fiber-wise characteristics of macroscopic white matter pathways throughout the brain. This fingerprinting approach was applied to a large sample ( N = 841) of subjects from the Human Connectome Project, revealing a reliable degree of between-subject correlation in the local connectome fingerprints, with a relatively complex, low-dimensional substructure. Using a cross-validated, high-dimensional regression analysis approach, we derived local connectome phenotype (LCP) maps that could reliably predict a subset of subject attributes measured, including demographic, health, and cognitive measures. These LCP maps were highly specific to the attribute being predicted but also sensitive to correlations between attributes. Collectively, these results indicate that the local architecture of white matter fascicles reflects a meaningful portion of the variability shared between subjects along several dimensions.

Interrelations of Justice, Rejection, Provocation, and Moral Disgust Sensitivity and Their Links with the Hostile Attribution Bias, Trait Anger, and Aggression

PubMed Central

Bondü, Rebecca; Richter, Philipp

2016-01-01

Several personality dispositions with common features capturing sensitivities to negative social cues have recently been introduced into psychological research. To date, however, little is known about their interrelations, their conjoint effects on behavior, or their interplay with other risk factors. We asked N = 349 adults from Germany to rate their justice, rejection, moral disgust, and provocation sensitivity, hostile attribution bias, trait anger, and forms and functions of aggression. The sensitivity measures were mostly positively correlated; particularly those with an egoistic focus, such as victim justice, rejection, and provocation sensitivity, hostile attributions and trait anger as well as those with an altruistic focus, such as observer justice, perpetrator justice, and moral disgust sensitivity. The sensitivity measures had independent and differential effects on forms and functions of aggression when considered simultaneously and when controlling for hostile attributions and anger. They could not be integrated into a single factor of interpersonal sensitivity or reduced to other well-known risk factors for aggression. The sensitivity measures, therefore, require consideration in predicting and preventing aggression. PMID:27303351

Ontology for Life-Cycle Modeling of Water Distribution Systems: Application of Model View Definition Attributes

DTIC Science & Technology

2013-06-01

ER D C/ CE RL C R- 13 -5 Ontology for Life-Cycle Modeling of Water Distribution Systems : Application of Model View Definition...2013 Ontology for Life-Cycle Modeling of Water Distribution Systems : Application of Model View Definition Attributes Kristine K. Fallon, Robert A...interior plumbing systems and the information exchange requirements for every participant in the design. The findings were used to develop an

Feasibility study on sensor data fusion for the CP-140 aircraft: fusion architecture analyses

NASA Astrophysics Data System (ADS)

Shahbazian, Elisa

1995-09-01

Loral Canada completed (May 1995) a Department of National Defense (DND) Chief of Research and Development (CRAD) contract, to study the feasibility of implementing a multi- sensor data fusion (MSDF) system onboard the CP-140 Aurora aircraft. This system is expected to fuse data from: (a) attributed measurement oriented sensors (ESM, IFF, etc.); (b) imaging sensors (FLIR, SAR, etc.); (c) tracking sensors (radar, acoustics, etc.); (d) data from remote platforms (data links); and (e) non-sensor data (intelligence reports, environmental data, visual sightings, encyclopedic data, etc.). Based on purely theoretical considerations a central-level fusion architecture will lead to a higher performance fusion system. However, there are a number of systems and fusion architecture issues involving fusion of such dissimilar data: (1) the currently existing sensors are not designed to provide the type of data required by a fusion system; (2) the different types (attribute, imaging, tracking, etc.) of data may require different degree of processing, before they can be used within a fusion system efficiently; (3) the data quality from different sensors, and more importantly from remote platforms via the data links must be taken into account before fusing; and (4) the non-sensor data may impose specific requirements on the fusion architecture (e.g. variable weight/priority for the data from different sensors). This paper presents the analyses performed for the selection of the fusion architecture for the enhanced sensor suite planned for the CP-140 aircraft in the context of the mission requirements and environmental conditions.

Method and system for control of upstream flowfields of vehicle in supersonic or hypersonic atmospheric flight

NASA Technical Reports Server (NTRS)

Daso, Endwell O. (Inventor); Pritchett, II, Victor E. (Inventor); Wang, Ten-See (Inventor); Farr, Rebecca Ann (Inventor)

2012-01-01

The upstream flowfield of a vehicle traveling in supersonic or hypersonic atmospheric flight is actively controlled using attribute(s) experienced by the vehicle. Sensed attribute(s) include pressure along the vehicle's outer mold line, temperature along the vehicle's outer mold line, heat flux along the vehicle's outer mold line, and/or local acceleration response of the vehicle. A non-heated, non-plasma-producing gas is injected into an upstream flowfield of the vehicle from at least one surface location along the vehicle's outer mold line. The pressure of the gas so-injected is adjusted based on the attribute(s) so-sensed.

Research on Attribute Reduction in Hoisting Motor State Recognition of Quayside Container Crane

NASA Astrophysics Data System (ADS)

Li, F.; Tang, G.; Hu, X.

2017-07-01

In view of too many attributes in hoisting motor state recognition of quayside container crane. Attribute reduction method based on discernibility matrix is introduced to attribute reduction of lifting motor state information table. A method of attribute reduction based on the combination of rough set and genetic algorithm is proposed to deal with the hoisting motor state decision table. Under the condition that the information system's decision-making ability is unchanged, the redundant attribute is deleted. Which reduces the complexity and computation of the recognition process of the hoisting motor. It is possible to realize the fast state recognition.

Attributional style and depressive symptoms in a male prison sample.

PubMed

O'Sullivan, Danny J; O'Sullivan, Maura E; O'Connell, Brendan D; O'Reilly, Ken; Sarma, Kiran M

2018-01-01

The reformulated learned helplessness model proposes that people who tend to make internal, stable, and global attributions in response to uncontrollable aversive events are more likely to develop depression. The present study sought to investigate the nature of the relationship between attributional style and depression in a male prison sample. One hundred and one adult male prisoners from four medium security prisons in Ireland completed the Attributional Style Questionnaire and measures of depression (BDI-II) and anxiety (BAI). Severity of self-reported depressive symptoms in the present sample was comparable to other prison and clinical samples, but higher than community samples. Participants were more severely affected by depressive symptoms than anxiety. The original attributional dimensions (i.e. internal, stable, and global) predicted a significant amount of variance in depression, but the model was not significant after controlling for anxiety. A subsequent regression model, comprising attributional dimensions for both negative events and positive events including a measure of 'uncontrollability', accounted for 35% of the variance in depression and the model retained significance while controlling for anxiety. An attributional model of depression may be relevant to the prison population and could provide a valid insight into the development and treatment of depressive symptoms in prisoners. The findings are interpreted in relation to previous research and implications for theory, clinical practice, and rehabilitation are discussed.

Attributional style and depressive symptoms in a male prison sample

PubMed Central

O’Sullivan, Danny J.; O’Sullivan, Maura E.; O’Connell, Brendan D.; O’Reilly, Ken; Sarma, Kiran M.

2018-01-01

The reformulated learned helplessness model proposes that people who tend to make internal, stable, and global attributions in response to uncontrollable aversive events are more likely to develop depression. The present study sought to investigate the nature of the relationship between attributional style and depression in a male prison sample. One hundred and one adult male prisoners from four medium security prisons in Ireland completed the Attributional Style Questionnaire and measures of depression (BDI-II) and anxiety (BAI). Severity of self-reported depressive symptoms in the present sample was comparable to other prison and clinical samples, but higher than community samples. Participants were more severely affected by depressive symptoms than anxiety. The original attributional dimensions (i.e. internal, stable, and global) predicted a significant amount of variance in depression, but the model was not significant after controlling for anxiety. A subsequent regression model, comprising attributional dimensions for both negative events and positive events including a measure of ‘uncontrollability’, accounted for 35% of the variance in depression and the model retained significance while controlling for anxiety. An attributional model of depression may be relevant to the prison population and could provide a valid insight into the development and treatment of depressive symptoms in prisoners. The findings are interpreted in relation to previous research and implications for theory, clinical practice, and rehabilitation are discussed. PMID:29444084

Successful Language Learning in a Corporate Setting: The Role of Attribution Theory and Its Relation to Intrinsic and Extrinsic Motivation

ERIC Educational Resources Information Center

Kálmán, Csaba; Eugenio, Esther Gutierrez

2015-01-01

Attribution theory (Weiner, 1985) and self-determination theory (Deci & Ryan, 1985) have been explored as contributors to L2 motivation (cf. Dörnyei, 2001) but have never been studied quantitatively in concert. In addition, students' attributions for success in learning a foreign language have never been measured through the use of a…

Race Attribution Modifies the Association Between Daily Discrimination and Major Depressive Disorder Among Blacks: the Role of Gender and Ethnicity.

PubMed

Assari, Shervin; Watkins, Daphne C; Caldwell, Cleopatra H

2015-06-01

Although the association between discrimination and depression among Blacks is well-known, we do not know if this effect is influenced by race attribution. In this current study, we investigated the effect modification of race attribution on the association between everyday discrimination and major depressive disorder (MDD) among Blacks in the United States, and whether this effect modification is influenced by the intersection of ethnicity and gender. With a cross-sectional design, this study used data from the National Survey of American Life (NSAL), 2001-2003. The study included a nationally representative sample of Blacks (n = 5,008), composed of 3,570 African Americans and 1,438 Caribbean Blacks. Everyday discrimination, two single-item measures of race attribution (race as the major barrier against upward social mobility, and race as the main cause for being discriminated against) and 12-month MDD were measured. In the first step, we fit logistic regressions to the pooled sample. In the next step, we ran regressions specific to the intersections of ethnicity and gender. Interaction between race attribution and discrimination were also entered into the models. Among Caribbean Black men, the belief that race is a major barrier against one's own upward social mobility modified the association between exposure to daily discrimination and MDD. In this group, the association between discrimination and MDD was weaker among those who believed that race is a major barrier against one's own upward social mobility. Race attribution did not modify the association between discrimination and MDD among African American men, African American women, and Caribbean Black women. The other measure of race attribution (race as the main cause of being discriminated against) did not modify the association between discrimination and MDD in any ethnicity by gender subgroups. Among Caribbean Black men, the link between everyday discrimination and depression may depend on seeing race as the main barrier against upward social mobility. Among African American men and women, however, the link between discrimination and MDD does not depend on race attribution. Our results suggest that ethnicity, gender, and race attribution may alter the association between discrimination and risk of MDD among Blacks.

The response to challenging behaviour by care staff: emotional responses, attributions of cause and observations of practice.

PubMed

Bailey, B A; Hare, D J; Hatton, C; Limb, K

2006-03-01

Previous studies have attempted to apply Weiner's attributional model of helping behaviour to care staff who work with service users with intellectual disabilities and challenging behaviours by using studies based on vignettes. The aims of the current study were to investigate the application of Weiner's model to 'real' service users with intellectual disabilities and challenging behaviours and to observe the care staff's actual responses to challenging behaviours displayed by service users. Also, to compare care staff attributions, emotions, optimism, willingness to help and observed helping behaviours for self-injurious behaviours in comparison to other forms of challenging behaviours. A total of 27 care staff completed two sets of measures, one set regarding a self-injurious behaviour and the other regarding other forms of challenging behaviour. An additional 16 staff completed one set of measures. The measures focused on care staff attributions, emotions, optimism and willingness to help. Also, 16 of the care staff were observed interacting with the service users to collect data regarding their responses to challenging behaviours. For both self-injurious behaviours and other forms of challenging behaviour, associations were found between the care staff internal, stable and uncontrollable attribution scores and care staff negative emotion scores. However, no associations were found between the care staff levels of emotion, optimism and willingness to help. Some associations were found between the care staff levels of willingness to help and observed helping behaviours. There were significant differences between the care staff attribution scores with higher scores being obtained for uncontrollable and stable attributions for other forms of challenging behaviours. No significant differences were found between the care staff emotions, optimism, willingness to help and observed helping behaviours. The results did not provide support for Weiner's attributional model of helping behaviour. However, a preliminary model of negative care staff behaviour was derived from the exploratory analyses completed. This model proposes that there are associations between internal, stable and uncontrollable attributions and negative emotions in care staff and also between negative emotions and negative behaviours displayed by care staff in response to the actions of service users.

How to determine the GHG budget of a pasture field with grazing animals

NASA Astrophysics Data System (ADS)

Ammann, Christof; Neftel, Albrecht; Felber, Raphael

2016-04-01

Up to now the scientific investigation and description of the agriculture related greenhouse gas (GHG) exchange has been largely separated into (i) direct animal related and (ii) ecosystem area related processes and measurement methods. An overlap of the two usually separated topics occurs for grazed pastures, where direct animal and pasture area emissions are relevant. In the present study eddy covariance (EC) flux measurements on the field scale were combined with a source location attribution (footprint) model and with GPS position measurements of the individual animals. The experiment was performed on a pasture field in Switzerland under a rotational full grazing regime with dairy cows. The exchange fluxes of CH4, CO2, and N2O were measured simultaneously over the entire year. The observed CH4 emission fluxes correlated well with the presence of cows in the flux footprint. When converted to average emission per cow, the results agreed with published values from respiration chamber experiments with similar cows. For CO2 a sophisticated partitioning algorithm was applied to separate the pasture and animal contributions, because both were in the same order of magnitude. The N2O exchange fully attributable to the pasture soil showed considerable and continuous emissions through the entire seasonal course mainly modulated by soil moisture and temperature. The resulting GHG budget shows that the largest GHG effect of the pasture system was due to enteric CH4 emissions followed by soil N2O emissions, but that the carbon storage change was affected by a much larger uncertainty. The results demonstrate that the EC technique in combination with animal position information allows to consistently quantify the exchange of all three GHG on the pasture and to adequately distinguish between direct animal and diffuse area sources (and sinks). Yet questions concerning a standardized attribution of animal related emissions to the pasture GHG budget still need to be resolved.

The effect of clock, media, and station location errors on Doppler measurement accuracy

NASA Technical Reports Server (NTRS)

Miller, J. K.

1993-01-01

Doppler tracking by the Deep Space Network (DSN) is the primary radio metric data type used by navigation to determine the orbit of a spacecraft. The accuracy normally attributed to orbits determined exclusively with Doppler data is about 0.5 microradians in geocentric angle. Recently, the Doppler measurement system has evolved to a high degree of precision primarily because of tracking at X-band frequencies (7.2 to 8.5 GHz). However, the orbit determination system has not been able to fully utilize this improved measurement accuracy because of calibration errors associated with transmission media, the location of tracking stations on the Earth's surface, the orientation of the Earth as an observing platform, and timekeeping. With the introduction of Global Positioning System (GPS) data, it may be possible to remove a significant error associated with the troposphere. In this article, the effect of various calibration errors associated with transmission media, Earth platform parameters, and clocks are examined. With the introduction of GPS calibrations, it is predicted that a Doppler tracking accuracy of 0.05 microradians is achievable.

CME Velocity and Acceleration Error Estimates Using the Bootstrap Method

NASA Technical Reports Server (NTRS)

Michalek, Grzegorz; Gopalswamy, Nat; Yashiro, Seiji

2017-01-01

The bootstrap method is used to determine errors of basic attributes of coronal mass ejections (CMEs) visually identified in images obtained by the Solar and Heliospheric Observatory (SOHO) mission's Large Angle and Spectrometric Coronagraph (LASCO) instruments. The basic parameters of CMEs are stored, among others, in a database known as the SOHO/LASCO CME catalog and are widely employed for many research studies. The basic attributes of CMEs (e.g. velocity and acceleration) are obtained from manually generated height-time plots. The subjective nature of manual measurements introduces random errors that are difficult to quantify. In many studies the impact of such measurement errors is overlooked. In this study we present a new possibility to estimate measurements errors in the basic attributes of CMEs. This approach is a computer-intensive method because it requires repeating the original data analysis procedure several times using replicate datasets. This is also commonly called the bootstrap method in the literature. We show that the bootstrap approach can be used to estimate the errors of the basic attributes of CMEs having moderately large numbers of height-time measurements. The velocity errors are in the vast majority small and depend mostly on the number of height-time points measured for a particular event. In the case of acceleration, the errors are significant, and for more than half of all CMEs, they are larger than the acceleration itself.

Cross-sectional associations of objectively assessed neighbourhood attributes with depressive symptoms in older adults of an ultra-dense urban environment: the Hong Kong ALECS study

PubMed Central

Zhang, Casper J P; Barnett, Anthony; Sit, Cindy H P; Lai, Poh-chin; Johnston, Janice M; Lee, Ruby S Y; Cerin, Ester

2018-01-01

Objectives This study aimed to examine the associations between objectively assessed neighbourhood environmental attributes and depressive symptoms in Hong Kong Chinese older adults and the moderating effects of neighbourhood environmental attributes on the associations between living arrangements and depressive symptoms. Design Cross-sectional observational study. Setting Hong Kong. Participants 909 Hong Kong Chinese community dwellers aged 65+ years residing in preselected areas stratified by walkability and socioeconomic status. Exposure and outcome measures Attributes of participants’ neighbourhood environment were objectively assessed using geographic information systems and environmental audits. Depressive symptoms were measured using the Geriatric Depression Scale. Results Overall, pedestrian infrastructure (OR=1.025; P=0.008), connectivity (OR=1.039; P=0.002) and prevalence of public transport stops (OR=1.056; P=0.012) were positively associated with the odds of reporting depressive symptoms. Older adults living alone were at higher risk of reporting any depressive symptoms than those living with others (OR=1.497; P=0.039). This association was moderated by neighbourhood crowdedness, perceptible pollution, access to destinations and presence of people. Residing in neighbourhoods with lower levels of these attributes was associated with increased deleterious effects of living alone. Living in neighbourhoods with lower public transport density also increased the deleterious effects of living alone on the number of depressive symptoms. Those living alone and residing in neighbourhoods with higher levels of connectivity tended to report more depressive symptoms than their counterparts. Conclusions The level of access to destinations and social networks across Hong Kong may be sufficiently high to reduce the risk of depressive symptoms in older adults. Yet, exposure to extreme levels of public transport density and associated traffic volumes may increase the risk of depressive symptoms. The provision of good access to a variety of destinations, public transport and public open spaces for socialising in the neighbourhood may help reduce the risk of depressive symptoms in older adults who live alone. PMID:29581207

Effects of geomorphology, habitat, and spatial location on fish assemblages in a watershed in Ohio, USA.

PubMed

D'Ambrosio, Jessica L; Williams, Lance R; Witter, Jonathan D; Ward, Andy

2009-01-01

In this paper, we evaluate relationships between in-stream habitat, water chemistry, spatial distribution within a predominantly agricultural Midwestern watershed and geomorphic features and fish assemblage attributes and abundances. Our specific objectives were to: (1) identify and quantify key environmental variables at reach and system wide (watershed) scales; and (2) evaluate the relative influence of those environmental factors in structuring and explaining fish assemblage attributes at reach scales to help prioritize stream monitoring efforts and better incorporate all factors that influence aquatic biology in watershed management programs. The original combined data set consisted of 31 variables measured at 32 sites, which was reduced to 9 variables through correlation and linear regression analysis: stream order, percent wooded riparian zone, drainage area, in-stream cover quality, substrate quality, gradient, cross-sectional area, width of the flood prone area, and average substrate size. Canonical correspondence analysis (CCA) and variance partitioning were used to relate environmental variables to fish species abundance and assemblage attributes. Fish assemblages and abundances were explained best by stream size, gradient, substrate size and quality, and percent wooded riparian zone. Further data are needed to investigate why water chemistry variables had insignificant relationships with IBI scores. Results suggest that more quantifiable variables and consideration of spatial location of a stream reach within a watershed system should be standard data incorporated into stream monitoring programs to identify impairments that, while biologically limiting, are not fully captured or elucidated using current bioassessment methods.

In Situ μGISAXS: II. Thaumatin Crystal Growth Kinetic

PubMed Central

Gebhardt, Ronald; Pechkova, Eugenia; Riekel, Christian; Nicolini, Claudio

2010-01-01

The formation of thaumatin crystals by Langmuir-Blodgett (LB) film nanotemplates was studied by the hanging-drop technique in a flow-through cell by synchrotron radiation micrograzing-incidence small-angle x-ray scattering. The kinetics of crystallization was measured directly on the interface of the LB film crystallization nanotemplate. The evolution of the micrograzing-incidence small-angle x-ray scattering patterns suggests that the increase in intensity in the Yoneda region is due to protein incorporation into the LB film. The intensity variation suggests several steps, which were modeled by system dynamics based on first-order differential equations. The kinetic data can be described by two processes that take place on the LB film, a first, fast, process, attributed to the crystal growth and its detachment from the LB film, and a second, slower process, attributed to an unordered association and conversion of protein on the LB film. PMID:20713011

Railway safety climate: a study on organizational development.

PubMed

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

Measuring, Enabling and Comparing Modularity, Regularity and Hierarchy in Evolutionary Design

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.

2005-01-01

For computer-automated design systems to scale to complex designs they must be able to produce designs that exhibit the characteristics of modularity, regularity and hierarchy - characteristics that are found both in man-made and natural designs. Here we claim that these characteristics are enabled by implementing the attributes of combination, control-flow and abstraction in the representation. To support this claim we use an evolutionary algorithm to evolve solutions to different sizes of a table design problem using five different representations, each with different combinations of modularity, regularity and hierarchy enabled and show that the best performance happens when all three of these attributes are enabled. We also define metrics for modularity, regularity and hierarchy in design encodings and demonstrate that high fitness values are achieved with high values of modularity, regularity and hierarchy and that there is a positive correlation between increases in fitness and increases in modularity. regularity and hierarchy.

Design and implementation of practical bidirectional texture function measurement devices focusing on the developments at the University of Bonn.

PubMed

Schwartz, Christopher; Sarlette, Ralf; Weinmann, Michael; Rump, Martin; Klein, Reinhard

2014-04-28

Understanding as well as realistic reproduction of the appearance of materials play an important role in computer graphics, computer vision and industry. They enable applications such as digital material design, virtual prototyping and faithful virtual surrogates for entertainment, marketing, education or cultural heritage documentation. A particularly fruitful way to obtain the digital appearance is the acquisition of reflectance from real-world material samples. Therefore, a great variety of devices to perform this task has been proposed. In this work, we investigate their practical usefulness. We first identify a set of necessary attributes and establish a general categorization of different designs that have been realized. Subsequently, we provide an in-depth discussion of three particular implementations by our work group, demonstrating advantages and disadvantages of different system designs with respect to the previously established attributes. Finally, we survey the existing literature to compare our implementation with related approaches.

Trust metrics in information fusion

NASA Astrophysics Data System (ADS)

Blasch, Erik

2014-05-01

Trust is an important concept for machine intelligence and is not consistent across many applications. In this paper, we seek to understand trust from a variety of factors: humans, sensors, communications, intelligence processing algorithms and human-machine displays of information. In modeling the various aspects of trust, we provide an example from machine intelligence that supports the various attributes of measuring trust such as sensor accuracy, communication timeliness, machine processing confidence, and display throughput to convey the various attributes that support user acceptance of machine intelligence results. The example used is fusing video and text whereby an analyst needs trust information in the identified imagery track. We use the proportional conflict redistribution rule as an information fusion technique that handles conflicting data from trusted and mistrusted sources. The discussion of the many forms of trust explored in the paper seeks to provide a systems-level design perspective for information fusion trust quantification.

CEO perceptions of competition--and strategic response in hospital markets.

PubMed

Alexander, J A; Burns, L R; Morrisey, M A; Johnson, V

2001-06-01

Physician-organization integration (POI) has emerged as a key issue for hospitals and health systems seeking to improve the quality and cost-effectiveness of care. Although competition and managed care are often cited as primary market drivers of the adoption of POI strategies, prior research has shown only weak associations between these market attributes and POI. This article argues that the role of key organizational decision makers has not been adequately accounted for in explaining strategic change. The study examines the role of hospital CEO perceptions of competition in predicting the adoption of five different approaches to POI. CEO perceptions of general market competition are explained by a combination of market and organizational attributes. Furthermore, when controlling for objective characteristics of the environment and organization, CEO perceptions of competition have consistent, statistically significant associations with four of five measures of POI examined.

Quality based approach for adaptive face recognition

NASA Astrophysics Data System (ADS)

Abboud, Ali J.; Sellahewa, Harin; Jassim, Sabah A.

2009-05-01

Recent advances in biometric technology have pushed towards more robust and reliable systems. We aim to build systems that have low recognition errors and are less affected by variation in recording conditions. Recognition errors are often attributed to the usage of low quality biometric samples. Hence, there is a need to develop new intelligent techniques and strategies to automatically measure/quantify the quality of biometric image samples and if necessary restore image quality according to the need of the intended application. In this paper, we present no-reference image quality measures in the spatial domain that have impact on face recognition. The first is called symmetrical adaptive local quality index (SALQI) and the second is called middle halve (MH). Also, an adaptive strategy has been developed to select the best way to restore the image quality, called symmetrical adaptive histogram equalization (SAHE). The main benefits of using quality measures for adaptive strategy are: (1) avoidance of excessive unnecessary enhancement procedures that may cause undesired artifacts, and (2) reduced computational complexity which is essential for real time applications. We test the success of the proposed measures and adaptive approach for a wavelet-based face recognition system that uses the nearest neighborhood classifier. We shall demonstrate noticeable improvements in the performance of adaptive face recognition system over the corresponding non-adaptive scheme.

The Effects of Q-Matrix Design on Classification Accuracy in the Log-Linear Cognitive Diagnosis Model.

PubMed

Madison, Matthew J; Bradshaw, Laine P

2015-06-01

Diagnostic classification models are psychometric models that aim to classify examinees according to their mastery or non-mastery of specified latent characteristics. These models are well-suited for providing diagnostic feedback on educational assessments because of their practical efficiency and increased reliability when compared with other multidimensional measurement models. A priori specifications of which latent characteristics or attributes are measured by each item are a core element of the diagnostic assessment design. This item-attribute alignment, expressed in a Q-matrix, precedes and supports any inference resulting from the application of the diagnostic classification model. This study investigates the effects of Q-matrix design on classification accuracy for the log-linear cognitive diagnosis model. Results indicate that classification accuracy, reliability, and convergence rates improve when the Q-matrix contains isolated information from each measured attribute.

Secure Data Access Control for Fog Computing Based on Multi-Authority Attribute-Based Signcryption with Computation Outsourcing and Attribute Revocation

PubMed Central

Xu, Qian; Tan, Chengxiang; Fan, Zhijie; Zhu, Wenye; Xiao, Ya; Cheng, Fujia

2018-01-01

Nowadays, fog computing provides computation, storage, and application services to end users in the Internet of Things. One of the major concerns in fog computing systems is how fine-grained access control can be imposed. As a logical combination of attribute-based encryption and attribute-based signature, Attribute-based Signcryption (ABSC) can provide confidentiality and anonymous authentication for sensitive data and is more efficient than traditional “encrypt-then-sign” or “sign-then-encrypt” strategy. Thus, ABSC is suitable for fine-grained access control in a semi-trusted cloud environment and is gaining more and more attention recently. However, in many existing ABSC systems, the computation cost required for the end users in signcryption and designcryption is linear with the complexity of signing and encryption access policy. Moreover, only a single authority that is responsible for attribute management and key generation exists in the previous proposed ABSC schemes, whereas in reality, mostly, different authorities monitor different attributes of the user. In this paper, we propose OMDAC-ABSC, a novel data access control scheme based on Ciphertext-Policy ABSC, to provide data confidentiality, fine-grained control, and anonymous authentication in a multi-authority fog computing system. The signcryption and designcryption overhead for the user is significantly reduced by outsourcing the undesirable computation operations to fog nodes. The proposed scheme is proven to be secure in the standard model and can provide attribute revocation and public verifiability. The security analysis, asymptotic complexity comparison, and implementation results indicate that our construction can balance the security goals with practical efficiency in computation. PMID:29772840

A System Dynamics Approach to Modeling the Sensitivity of Inappropriate Emergency Department Utilization

NASA Astrophysics Data System (ADS)

Behr, Joshua G.; Diaz, Rafael

Non-urgent Emergency Department utilization has been attributed with increasing congestion in the flow and treatment of patients and, by extension, conditions the quality of care and profitability of the Emergency Department. Interventions designed to divert populations to more appropriate care may be cautiously received by operations managers due to uncertainty about the impact an adopted intervention may have on the two values of congestion and profitability. System Dynamics (SD) modeling and simulation may be used to measure the sensitivity of these two, often-competing, values of congestion and profitability and, thus, provide an additional layer of information designed to inform strategic decision making.

Climate Change Detection and Attribution of Infrared Spectrum Measurements

NASA Technical Reports Server (NTRS)

Phojanamongkolkij, Nipa; Parker, Peter A.; Mlynczak, Martin G.

2012-01-01

Climate change occurs when the Earth's energy budget changes due to natural or possibly anthropogenic forcings. These forcings cause the climate system to adjust resulting in a new climate state that is warmer or cooler than the original. The key question is how to detect and attribute climate change. The inference of infrared spectral signatures of climate change has been discussed in the literature for nearly 30 years. Pioneering work in the 1980s noted that distinct spectral signatures would be evident in changes in the infrared radiance emitted by the Earth and its atmosphere, and that these could be observed from orbiting satellites. Since then, a number of other studies have advanced the concepts of spectral signatures of climate change. Today the concept of using spectral signatures to identify and attribute atmospheric composition change is firmly accepted and is the foundation of the Climate Absolute Radiance and Refractivity Observatory (CLARREO) satellite mission being developed at NASA. In this work, we will present an overview of the current climate change detection concept using climate model calculations as surrogates for climate change. Any future research work improving the methodology to achieve this concept will be valuable to our society.

The Army Communications Objectives Measurement System (ACOMS) Users’ Manual

DTIC Science & Technology

1988-07-01

UNLIMITED E2 SAME AS P PT. 0 DTIC USERS U n1e las s i f i e ( 22a. NAME OF RESPONSIBLE INDIVIDUAL 22b. TELEPHONE (include Area Code) 22c, OFFICE SYMBOL T...of advertising to be directed at each segment. ACOMS was designed so that the data would be useful in examining brand differentiation , for example...comparison of image elements--at several levels: differentiation among the active Army, Reserve, National Guard, and ROTC attributes; differentiation

Pig Feeding under the Potato-green Forage Base System with or without Addition of Herbs versus a Concentrate Based System: Effect on Post-slaughter Performance and Pork Characteristics

PubMed Central

Turyk, Zofia; Osek, Maria; Olkowski, Bogusław; Janocha, Alina

2014-01-01

This study examined carcass and meat quality parameters in growing/finishing pigs fed unconventionally versus the concentrate-based system. Ninety-six, 12 wk old pigs (34±SD 0.3 kg) were randomly divided into three groups, assigned to one of the three dietary treatments: standard complete concentrate mixture, conventional (C diet); unconventional, steamed potato-green forage-concentrate based diet (U diet), and unconventional basal diet+herbage mix (UH diet). Pigs fed U diet showed lower dressing percentage, meatiness, loin eye area, and weight of pork neck (p≤0.05), but their carcasses were significantly (p≤0.05) longer and had increased backfat depth (p≤0.05). There was no impact of the diet on the meat content of dry matter, crude ash, acidity, and colour parameters of m. longissimus. Unconventional feeding significantly (p≤0.05) elevated water the holding capacity of m. longissimus and slightly improved the sensory attributes analysis of meat. The addition of herbs resulted in increased loin eye area (p≤0.05), decreased fat content (p≤0.05) in m. longissimus, and tended to improve some sensory attributes of meat. There were significant gender differences in response to all diets. There were significant diet×sex interactions for some measured variables, but there were no clearly identifiable trends with regard to any specific carcass or meat parameters. Feeding unconventional diet to pigs may offer better culinary attributes of the meat, and improve some technologically important characteristics of pig carcass, but may negatively affect some carcass or meat parameters. PMID:25050003

Consumer palatability scores, sensory descriptive attributes, and volatile compounds of grilled beef steaks from three USDA Quality Grades.

PubMed

Legako, J F; Dinh, T T N; Miller, M F; Adhikari, K; Brooks, J C

2016-02-01

Consumer palatability scores, sensory descriptive attributes, and volatile compounds were assessed for beef Longissimus lumborum steaks of USDA Prime, Low Choice, and Standard grades. Overall and flavor liking was greater (P<0.05) for Prime and Low Choice. Initial flavor impact and fat-like attributes were greater (P<0.05) among Prime and Low Choice. Prime had greater (P<0.05) brown/roasted, beef identity, overall sweetness, and umami. Cardboard was greater (P<0.05) in Standard. Volatile compounds representing flavor development pathways were varied with quality grade. Standard had greater (P<0.05) abundances of n-aldehydes. Phenylacetaldehyde was greater (P<0.05) in Prime and Low Choice. Both 2,3-butanedione and 3-hydroxy-2-butanone were greatest (P<0.05) in Prime. Overall liking was positively correlated with many descriptive attributes, 3-hydroxy-2-butanone, and phenylacetaldehyde, and negatively correlated with cardboard, green, and n-aldehydes. While the measured attributes and volatiles may not be causative of flavor, this data indicates potential for prediction of flavor through their measurement. Copyright © 2015 Elsevier Ltd. All rights reserved.

Body-related state shame and guilt in women: do causal attributions mediate the influence of physical self-concept and shame and guilt proneness.

PubMed

Crocker, Peter R E; Brune, Sara M; Kowalski, Kent C; Mack, Diane E; Wilson, Philip M; Sabiston, Catherine M

2014-01-01

Guided by the process model of self-conscious emotions, this study examined whether physical self-concept (PSC) and shame and guilt proneness were associated with body-related self-conscious emotions of state shame and guilt and if these relationships were mediated by attributions of stability, globality, and controllability. Female participants (N=284; Mean age=20.6±1.9 years) completed measures of PSC and shame and guilt proneness before reading a hypothetical scenario. Participants completed measures of attributions and state shame and guilt in response to the scenario. Significant relationships were noted between state shame and attributions of globality and controllability, and shame proneness, guilt proneness, and PSC. Similar relationships, with the additional predictor of stability, were found for state guilt. Mediation analysis partially supported the process model hypotheses for shame. Results indicate PSC and shame proneness are important in predicting body-related emotions, but the role of specific attributions are still unclear. Copyright © 2013 Elsevier Ltd. All rights reserved.

A preliminary investigation into theory of mind and attributional style in adults with grandiose delusions.

PubMed

Boyden, Paul; Knowles, Rebecca; Corcoran, Rhiannon; Hamilton, Simon; Rowse, Georgina

2015-01-01

A preliminary cognitive model of grandiose delusions has been put forward suggesting that persecutory and grandiose delusions shared distinct, yet overlapping psychological processes. This study aims to test this model and hypothesises that participants experiencing grandiose delusions may demonstrate a theory of mind (ToM) impairment and differences in attributional style compared to a control group. A cross-sectional design compared the performance of 18 individuals with grandiose delusions to a control group of 14 participants with depression. ToM was measured using a non-verbal joke appreciation task and a verbal stories task. Attributional style was measured using the internal, personal and situational attributions questionnaire. Participants experiencing grandiose delusions performed significantly worse on both ToM tasks compared to controls. Furthermore, these participants provided significantly more atypical answers when explaining the joke behind the ToM cartoons. No differences for subjective funniness ratings or attributional style were found. This preliminary study indicated participants experiencing grandiose delusions have ToM impairments which may contribute to the maintenance of this symptom.

Distress in spouses of service members with symptoms of combat-related PTSD: secondary traumatic stress or general psychological distress?

PubMed

Renshaw, Keith D; Allen, Elizabeth S; Rhoades, Galena K; Blais, Rebecca K; Markman, Howard J; Stanley, Scott M

2011-08-01

Combat-related posttraumatic stress disorder (PTSD) is linked with elevated psychological distress in service members'/veterans' spouses. Researchers use a variety of terms to describe this distress, and recently, secondary traumatic stress and secondary traumatic stress disorder (STS/STSD) have become increasingly commonly used. Although STS/STSD connotes a specific set of symptoms that are linked to service members'/veterans' symptoms, researchers often use general measures of distress or generically worded measures of PTSD symptoms to assess STS/STSD. To determine how often scores on such measures appear to be an accurate reflection of STS/STSD, we examined responses to a measure of PTSD symptoms in 190 wives of male service members with elevated levels of PTSD symptoms. Wives rated their own PTSD symptoms, and then answered questions about their attributions for the symptoms they endorsed. Fewer than 20% of wives who endorsed symptoms on the PTSD measure attributed these symptoms completely to their husbands' military experiences. Moreover, compared with wives who attributed symptoms only to events in their own lives, wives who attributed symptoms completely or partially to their husbands' military experiences had a greater overlap between some of their responses on the PTSD measure and their responses to a measure of general psychological distress. These results suggest that most wives of service members/veterans with PTSD experience generic psychological distress that is not conceptually consistent with STS/STSD, although a subset does appear to endorse a reaction consistent with this construct. Implications of these findings for intervention and research with this vulnerable population are discussed.

Distress in Spouses of Service Members with Symptoms of Combat-Related PTSD: Secondary Traumatic Stress or General Psychological Distress?

PubMed Central

Renshaw, Keith D.; Allen, Elizabeth S.; Rhoades, Galena K.; Blais, Rebecca K.; Markman, Howard J.; Stanley, Scott M.

2011-01-01

Combat-related posttraumatic stress disorder (PTSD) is linked with elevated psychological distress in service members’/veterans’ spouses. Researchers use a variety of terms to describe this distress, and recently, secondary traumatic stress and secondary traumatic stress disorder (STS/STSD) have become increasingly commonly used. Although STS/STSD connotes a specific set of symptoms that are linked to service members’/veterans’ symptoms, researchers often use general measures of distress or generically worded measures of PTSD symptoms to assess STS/STSD. To determine how often scores on such measures appear to be an accurate reflection of STS/STSD, we examined responses to a measure of PTSD symptoms in 190 wives of male service members with elevated levels of PTSD symptoms. Wives rated their own PTSD symptoms, and then answered questions about their attributions for the symptoms they endorsed. Fewer than 20% of wives who endorsed symptoms on the PTSD measure attributed these symptoms completely to their husbands’ military experiences. Moreover, compared with wives who attributed symptoms only to events in their own lives, wives who attributed symptoms completely or partially to their husbands’ military experiences had a greater overlap between some of their responses on the PTSD measure and their responses to a measure of general psychological distress. These results suggest that most wives of service members/veterans with PTSD experience generic psychological distress that is not conceptually consistent with STS/STSD, although a subset does appear to endorse a reaction consistent with this construct. Implications of these findings for intervention and research with this vulnerable population are discussed. PMID:21639635

Changes in Quality of Health Care Delivery after Vertical Integration.

PubMed

Carlin, Caroline S; Dowd, Bryan; Feldman, Roger

2015-08-01

To fill an empirical gap in the literature by examining changes in quality of care measures occurring when multispecialty clinic systems were acquired by hospital-owned, vertically integrated health care delivery systems in the Twin Cities area. Administrative data for health plan enrollees attributed to treatment and control clinic systems, merged with U.S. Census data. We compared changes in quality measures for health plan enrollees in the acquired clinics to enrollees in nine control groups using a differences-in-differences model. Our dataset spans 2 years prior to and 4 years after the acquisitions. We estimated probit models with errors clustered within enrollees. Data were assembled by the health plan's informatics team. Vertical integration is associated with increased rates of colorectal and cervical cancer screening and more appropriate emergency department use. The probability of ambulatory care-sensitive admissions increased when the acquisition caused disruption in admitting patterns. Moving a clinic system into a vertically integrated delivery system resulted in limited increases in quality of care indicators. Caution is warranted when the acquisition causes disruption in referral patterns. © Health Research and Educational Trust.

Continent-scale global change attribution in European birds - combining annual and decadal time scales.

PubMed

Jørgensen, Peter Søgaard; Böhning-Gaese, Katrin; Thorup, Kasper; Tøttrup, Anders P; Chylarecki, Przemysław; Jiguet, Frédéric; Lehikoinen, Aleksi; Noble, David G; Reif, Jiri; Schmid, Hans; van Turnhout, Chris; Burfield, Ian J; Foppen, Ruud; Voříšek, Petr; van Strien, Arco; Gregory, Richard D; Rahbek, Carsten

2016-02-01

Species attributes are commonly used to infer impacts of environmental change on multiyear species trends, e.g. decadal changes in population size. However, by themselves attributes are of limited value in global change attribution since they do not measure the changing environment. A broader foundation for attributing species responses to global change may be achieved by complementing an attributes-based approach by one estimating the relationship between repeated measures of organismal and environmental changes over short time scales. To assess the benefit of this multiscale perspective, we investigate the recent impact of multiple environmental changes on European farmland birds, here focusing on climate change and land use change. We analyze more than 800 time series from 18 countries spanning the past two decades. Analysis of long-term population growth rates documents simultaneous responses that can be attributed to both climate change and land-use change, including long-term increases in populations of hot-dwelling species and declines in long-distance migrants and farmland specialists. In contrast, analysis of annual growth rates yield novel insights into the potential mechanisms driving long-term climate induced change. In particular, we find that birds are affected by winter, spring, and summer conditions depending on the distinct breeding phenology that corresponds to their migratory strategy. Birds in general benefit from higher temperatures or higher primary productivity early on or in the peak of the breeding season with the largest effect sizes observed in cooler parts of species' climatic ranges. Our results document the potential of combining time scales and integrating both species attributes and environmental variables for global change attribution. We suggest such an approach will be of general use when high-resolution time series are available in large-scale biodiversity surveys. © 2015 John Wiley & Sons Ltd.

The Hyperspectral Absorption Sensor - Advantages and challenges of continuous, in situ absorption coefficient measurements

NASA Astrophysics Data System (ADS)

Wollschläger, J.; Röttgers, R.; Petersen, W.; Zielinski, O.

2016-12-01

A free-water mass balance-based study was conducted to address the rate of metabolism and net carbon exchange for the tidal wetland and estuarine portion of the coastal ocean and the uncertainties associated with this approach were assessed. Open water diurnal O2 and dissolved inorganic carbon (DIC) were measured seasonally in a salt marsh-estuary in Georgia, U.S.A. with a focus on the marsh-estuary linkage associated with tidal flooding. We observed that the overall estuarine system was a net source of CO2 to the atmosphere and coastal ocean and a net sink for oceanic and atmospheric O2. Rates of metabolism were extremely high, with respiration (43 mol m-2 yr-1) greatly exceeding gross primary production (28 mol m-2 yr-1), such that the overall system was net heterotrophic. Metabolism measured with DIC were higher than with O2, which we attribute to high rates of anaerobic respiration and reduced sulfur storage in salt marsh sediments, and we assume substantial levels of anoxygenic photosynthesis. We found gas exchange from a flooded marsh is substantial, accounting for about 28% of total O2 and CO2 air-water exchange. A significant percentage of the overall estuarine aquatic metabolism is attributable to metabolism of marsh organisms during inundation. Our study suggests not rely on oceanographic stoichiometry to convert from O2to C based measurements when constructing C balances for the coastal ocean. We also suggest eddy covariance measurements of salt marsh net ecosystem exchange underestimate net ecosystem production as they do not account for lateral DIC exchange associated with marsh tidal inundation. With the increase of global temperature and sea level rise, salt marshes are likely to export more inorganic carbon to the atmosphere and the coastal ocean due to the decrease of solubility, the increase of aquatic and benthic metabolic activities and the longer marsh inundation.

Chapter 2. Selecting Key Habitat Attributes for Monitoring

Treesearch

Gregory D. Hayward; Lowell H. Suring

2013-01-01

The success of habitat monitoring programs depends, to a large extent, on carefully selecting key habitat attributes to monitor. The challenge of choosing a limited but sufficient set of attributes will differ depending on the objectives of the monitoring program. In some circumstances, such as managing National Forest System lands for threatened and endangered species...

Attributional Style of Children with and without Specific Learning Disability

ERIC Educational Resources Information Center

Pasta, Tiziana; Mendola, Manuela; Longobardi, Claudio; Prino, Laura Elvira; Gastaldi, Francesca Giovanna Maria

2013-01-01

Introduction: The literature highlights that pupils with Specific Learning Disability (SLD) often reveal a poor meta-cognitive system, with low levels of attribution to internal factors like diligence and personal skill, and high levels of attribution to external factors like ease of task, luck or help from others. Methods: This study aims to…

The “Depressive” Attributional Style Is Not That Depressive for Buddhists

PubMed Central

Liu, Michelle T.; Wang, Fei; Peng, Kaiping

2017-01-01

Numerous studies have shown that depression-prone people are characterized by a chronic style of attributing failures to internal, stable, and global causes, sometimes labeled as the “depressive attributional style.” Much less is known, however, about how social-cultural factors such as religious beliefs might modulate these processes. In the current study, we hypothesized that Buddhism’s view of ultimate internal controllability plays a buffering role against the depressive attributional style and reduces its negative impacts. We administrated measures of attributional styles and psychological adjustments to a sample of Chinese Buddhists as well as a control group recruited in China. Data analyses showed that Buddhists were more likely to attribute bad outcomes to internal, stable, and global causes, but their well-being was less affected by it. Thus, these results indicate that the “depressive” attributional style is not that depressive for Buddhists, after all. PMID:28701970

A novel adaptive mixed reality system for stroke rehabilitation: principles, proof of concept, and preliminary application in 2 patients.

PubMed

Chen, Yinpeng; Duff, Margaret; Lehrer, Nicole; Liu, Sheng-Min; Blake, Paul; Wolf, Steven L; Sundaram, Hari; Rikakis, Thanassis

2011-01-01

This article presents the principles of an adaptive mixed reality rehabilitation (AMRR) system, as well as the training process and results from 2 stroke survivors who received AMRR therapy, to illustrate how the system can be used in the clinic. The AMRR system integrates traditional rehabilitation practices with state-of-the-art computational and motion capture technologies to create an engaging environment to train reaching movements. The system provides real-time, intuitive, and integrated audio and visual feedback (based on detailed kinematic data) representative of goal accomplishment, activity performance, and body function during a reaching task. The AMRR system also provides a quantitative kinematic evaluation that measures the deviation of the stroke survivor's movement from an idealized, unimpaired movement. The therapist, using the quantitative measure and knowledge and observations, can adapt the feedback and physical environment of the AMRR system throughout therapy to address each participant's individual impairments and progress. Individualized training plans, kinematic improvements measured over the entire therapy period, and the changes in relevant clinical scales and kinematic movement attributes before and after the month-long therapy are presented for 2 participants. The substantial improvements made by both participants after AMRR therapy demonstrate that this system has the potential to considerably enhance the recovery of stroke survivors with varying impairments for both kinematic improvements and functional ability.

Source apportionment studies on particulate matter in Beijing/China

NASA Astrophysics Data System (ADS)

Suppan, P.; Shen, R.; Shao, L.; Schrader, S.; Schäfer, K.; Norra, S.; Vogel, B.; Cen, K.; Wang, Y.

2013-05-01

More than 15 million people in the greater area of Beijing are still suffering from severe air pollution levels caused by sources within the city itself but also from external impacts like severe dust storms and long range advection from the southern and central part of China. Within this context particulate matter (PM) is the major air pollutant in the greater area of Beijing (Garland et al., 2009). PM did not serve only as lead substance for air quality levels and therefore for adverse health impact effects but also for a strong influence on the climate system by changing e.g. the radiative balance. Investigations on emission reductions during the Olympic Summer Games in 2008 have caused a strong reduction on coarser particles (PM10) but not on smaller particles (PM2.5). In order to discriminate the composition of the particulate matter levels, the different behavior of coarser and smaller particles investigations on source attribution, particle characteristics and external impacts on the PM levels of the city of Beijing by measurements and modeling are performed: a) Examples of long term measurements of PM2.5 filter sampling in 2010/2011 with the objectives of detailed chemical (source attribution, carbon fraction, organic speciation and inorganic composition) and isotopic analyses as well as toxicological assessment in cooperation with several institutions (Karlsruhe Institute of Technology (IfGG/IMG), Helmholtz Zentrum München (HMGU), University Rostock (UR), Chinese University of Mining and Technology Beijing, CUMTB) will be discussed. b) The impact of dust storm events on the overall pollution level of particulate matter in the greater area of Beijing is being assessed by the online coupled comprehensive model system COSMO-ART. First results of the dust storm modeling in northern China (2011, April 30th) demonstrates very well the general behavior of the meteorological parameters temperature and humidity as well as a good agreement between modeled and measured dust storm concentration variability at Beijing in the course of time. The results show the importance of intertwine investigations of measurements and modeling, the analysis of local air pollution levels as well as the impact and analysis of advective processes in the greater region of Beijing. Comprehensive investigations on particulate matter are a prerequisite for the knowledge of the source strengths and source attribution to the overall air pollution level. Only this knowledge can help to formulate and to introduce specific reduction measures to reduce coarser as well as finer particulates.

Detection of "noisy" chaos in a time series

NASA Technical Reports Server (NTRS)

Chon, K. H.; Kanters, J. K.; Cohen, R. J.; Holstein-Rathlou, N. H.

1997-01-01

Time series from biological system often displays fluctuations in the measured variables. Much effort has been directed at determining whether this variability reflects deterministic chaos, or whether it is merely "noise". The output from most biological systems is probably the result of both the internal dynamics of the systems, and the input to the system from the surroundings. This implies that the system should be viewed as a mixed system with both stochastic and deterministic components. We present a method that appears to be useful in deciding whether determinism is present in a time series, and if this determinism has chaotic attributes. The method relies on fitting a nonlinear autoregressive model to the time series followed by an estimation of the characteristic exponents of the model over the observed probability distribution of states for the system. The method is tested by computer simulations, and applied to heart rate variability data.

Exercise identity and attribution properties predict negative self-conscious emotions for exercise relapse.

PubMed

Flora, Parminder K; Strachan, Shaelyn M; Brawley, Lawrence R; Spink, Kevin S

2012-10-01

Research on exercise identity (EXID) indicates that it is related to negative affect when exercisers are inconsistent or relapse. Although identity theory suggests that causal attributions about this inconsistency elicit negative self-conscious emotions of shame and guilt, no EXID studies have examined this for exercise relapse. Weiner's attribution-based theory of interpersonal motivation (2010) offers a means of testing the attribution-emotion link. Using both frameworks, we examined whether EXID and attributional properties predicted negative emotions for exercise relapse. Participants (n = 224) read an exercise relapse vignette, and then completed EXID, attributions, and emotion measures. Hierarchical multiple regression models using EXID and the attributional property of controllability significantly predicted each of shame and guilt, R² adjusted = .09, ps ≤ .001. Results support identity theory suggestions and Weiner's specific attribution-emotion hypothesis. This first demonstration of an interlinking of EXID, controllability, and negative self-conscious emotions offers more predictive utility using complementary theories than either theory alone.

Using sea urchin gametes and zygotes to investigate centrosome duplication.

PubMed

Sluder, Greenfield

2016-01-01

Centriole structure and function in the sea urchin zygote parallel those in mammalian somatic cells. Here, I briefly introduce the properties and attributes of the sea urchin system that make it an attractive platform for the study of centrosome and centriole duplication. These attributes apply to all echinoderms readily available from commercial suppliers: sea urchins, sand dollars, and starfish. I list some of the practical aspects of the system that make it a cost- and time-effective system for experimental work and then list properties that are a "tool kit" that can be used to conduct studies that would not be practical, or in some cases not possible, with mammalian somatic cells. Since centrioles organize and localize the pericentriolar material that nucleates the astral arrays of microtubules (Bobinnec et al. in J Cell Biol 143(6):1575-1589, 1998), the pattern of aster duplication over several cell cycles can be used as a reliable measure for centriole duplication (Sluder and Rieder in J Cell Biol 100(3):887-896, 1985). Descriptions of the methods my laboratory has used to handle and image echinoderm zygotes are reviewed in Sluder et al. (Methods Cell Biol 61:439-472, 1999). Also included is a bibliography of papers that describe additional methods.

Are there pollination syndromes in the Australian epacrids (Ericaceae: Styphelioideae)? A novel statistical method to identify key floral traits per syndrome

PubMed Central

Johnson, Karen A.

2013-01-01

Background and Aims Convergent floral traits hypothesized as attracting particular pollinators are known as pollination syndromes. Floral diversity suggests that the Australian epacrid flora may be adapted to pollinator type. Currently there are empirical data on the pollination systems for 87 species (approx. 15 % of Australian epacrids). This provides an opportunity to test for pollination syndromes and their important morphological traits in an iconic element of the Australian flora. Methods Data on epacrid–pollinator relationships were obtained from published literature and field observation. A multivariate approach was used to test whether epacrid floral attributes related to pollinator profiles. Statistical classification was then used to rank floral attributes according to their predictive value. Data sets excluding mixed pollination systems were used to test the predictive power of statistical classification to identify pollination models. Key Results Floral attributes are correlated with bird, fly and bee pollination. Using floral attributes identified as correlating with pollinator type, bird pollination is classified with 86 % accuracy, red flowers being the most important predictor. Fly and bee pollination are classified with 78 and 69 % accuracy, but have a lack of individually important floral predictors. Excluding mixed pollination systems improved the accuracy of the prediction of both bee and fly pollination systems. Conclusions Although most epacrids have generalized pollination systems, a correlation between bird pollination and red, long-tubed epacrids is found. Statistical classification highlights the relative importance of each floral attribute in relation to pollinator type and proves useful in classifying epacrids to bird, fly and bee pollination systems. PMID:23681546

The effect of source credibility on consumers' perceptions of the quality of health information on the Internet.

PubMed

Bates, Benjamin R; Romina, Sharon; Ahmed, Rukhsana; Hopson, Danielle

2006-03-01

Recent use of the Internet as a source of health information has raised concerns about consumers' ability to tell 'good' information from 'bad' information. Although consumers report that they use source credibility to judge information quality, several observational studies suggest that consumers make little use of source credibility. This study examines consumer evaluations of web pages attributed to a credible source as compared to generic web pages on measures of message quality. In spring 2005, a community-wide convenience survey was distributed in a regional hub city in Ohio, USA. 519 participants were randomly assigned one of six messages discussing lung cancer prevention: three messages each attributed to a highly credible national organization and three identical messages each attributed to a generic web page. Independent sample t-tests were conducted to compare each attributed message to its counterpart attributed to a generic web page on measures of trustworthiness, truthfulness, readability, and completeness. The results demonstrated that differences in attribution to a source did not have a significant effect on consumers' evaluations of the quality of the information.Conclusions. The authors offer suggestions for national organizations to promote credibility to consumers as a heuristic for choosing better online health information through the use of media co-channels to emphasize credibility.

All Effects of Psychophysical Variables on Color Attributes: A Classification System

PubMed Central

Pridmore, Ralph W.; Melgosa, Manuel

2015-01-01

This paper reports the research and structuring of a classification system for the effects of psychophysical variables on the color attributes. A basic role of color science is to psychophysically specify color appearance. An early stage is to specify the effects of the psychophysical variables (as singles, pairs, etc) on the color attributes (as singles, pairs, etc), for example to model color appearance. Current data on effects are often scarce or conflicting. Few effects are well understood, and the practice of naming effects after their discoverer(s) is inadequate and can be confusing. The number and types of possible effects have never been systematically analyzed and categorized. We propose a simple and rigorous system of classification including nomenclature. The total range of effects is computed from the possible combinations of three psychophysical variables (luminance, dominant wavelength, purity) and six color attributes (lightness, brightness, hue, chroma, colorfulness, saturation) in all modes of appearance. Omitting those effects that are normally impossible to perceive at any one time (such as four- or five-dimensional colors), the total number perceivable is 161 types of effects for all modes of appearance. The type of effect is named after the psychophysical stimulus (or stimuli) and the relevant color attribute(s), e.g., Luminance-on-hue effect (traditionally known as Bezold-Brucke effect). Each type of effect may include slightly different effects with infinite variations depending on experimental parameters. PMID:25859845

A trace-driven analysis of name and attribute caching in a distributed system

NASA Technical Reports Server (NTRS)

Shirriff, Ken W.; Ousterhout, John K.

1992-01-01

This paper presents the results of simulating file name and attribute caching on client machines in a distributed file system. The simulation used trace data gathered on a network of about 40 workstations. Caching was found to be advantageous: a cache on each client containing just 10 directories had a 91 percent hit rate on name look ups. Entry-based name caches (holding individual directory entries) had poorer performance for several reasons, resulting in a maximum hit rate of about 83 percent. File attribute caching obtained a 90 percent hit rate with a cache on each machine of the attributes for 30 files. The simulations show that maintaining cache consistency between machines is not a significant problem; only 1 in 400 name component look ups required invalidation of a remotely cached entry. Process migration to remote machines had little effect on caching. Caching was less successful in heavily shared and modified directories such as /tmp, but there weren't enough references to /tmp overall to affect the results significantly. We estimate that adding name and attribute caching to the Sprite operating system could reduce server load by 36 percent and the number of network packets by 30 percent.

Regulatory systems for prevention and control of rabies, Japan.

PubMed

Takahashi-Omoe, Hiromi; Omoe, Katsuhiko; Okabe, Nobuhiko

2008-09-01

Japan is one of the few rabies-free countries. Although 3 imported cases of human rabies were seen in 1970 and 2006, no other cases have been reported for approximately 50 years. The elimination of rabies in Japan is attributed to not only its geographic isolation but also to effective prevention and control measures, such as registration and vaccination of domestic dogs, required quarantine of susceptible imported animals, and national plans of action based on scientific research. Countermeasures against rabies have been upgraded; an improved management system for domestic dogs under the amended Enforcement Regulations of the Rabies Prevention Law has been in effect since April 2007. The latest regulatory systems for preventing and controlling rabies provide an effective model for elimination of the disease worldwide.

The design, development, and flight test results of the Boeing 737 aircraft antennas for the ICAO demonstration of the TRSB microwave landing system

NASA Technical Reports Server (NTRS)

Campbell, T. G.; White, W. E.; Gilreath, M. C.

1976-01-01

The Research Support Flight System, a modified Boeing 737, was used to evaluate the performance of several aircraft antennas and locations for the Time Reference Scanning Beam (TRSB) Microwave Landing System (MLS). These tests were conducted at the National Aviation Facilities Experimental Center (NAFEC), Atlantic City, New Jersey on December 18, 1975. The flight tests measured the signal strength and all pertinent MLS data during a straight-in approach, a racetrack approach, and ICAO approach profiles using the independent antenna-receiver combinations simultaneously on the aircraft. Signal drop-outs were experienced during the various approaches but only a small percentage could be attributed to antenna pattern effects.

A Literature Review and Compilation of Nuclear Waste Management System Attributes for Use in Multi-Objective System Evaluations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinina, Elena Arkadievna; Samsa, Michael

The purpose of this work was to compile a comprehensive initial set of potential nuclear waste management system attributes. This initial set of attributes is intended to serve as a starting point for additional consideration by system analysts and planners to facilitate the development of a waste management system multi-objective evaluation framework based on the principles and methodology of multi-attribute utility analysis. The compilation is primarily based on a review of reports issued by the Canadian Nuclear Waste Management Organization (NWMO) and the Blue Ribbon Commission on America's Nuclear Future (BRC), but also an extensive review of the available literaturemore » for similar and past efforts as well. Numerous system attributes found in different sources were combined into a single objectives-oriented hierarchical structure. This study provides a discussion of the data sources and the descriptions of the hierarchical structure. A particular focus of this study was on collecting and compiling inputs from past studies that involved the participation of various external stakeholders. However, while the important role of stakeholder input in a country's waste management decision process is recognized in the referenced sources, there are only a limited number of in-depth studies of the stakeholders' differing perspectives. Compiling a comprehensive hierarchical listing of attributes is a complex task since stakeholders have multiple and often conflicting interests. The BRC worked for two years (January 2010 to January 2012) to "ensure it has heard from as many points of view as possible." The Canadian NWMO study took four years and ample resources, involving national and regional stakeholders' dialogs, internet-based dialogs, information and discussion sessions, open houses, workshops, round tables, public attitude research, website, and topic reports. The current compilation effort benefited from the distillation of these many varied inputs conducted by the previous studies.« less

Counterbalancing patient demands with evidence: results from a pan-Canadian randomized clinical trial of brief supportive-expressive group psychotherapy for women with systemic lupus erythematosus.

PubMed

Dobkin, Patricia L; Da Costa, Deborah; Joseph, Lawrence; Fortin, Paul R; Edworthy, Steven; Barr, Susan; Ensworth, Stephanie; Esdaile, John M; Beaulieu, André; Zummer, Michel; Senécal, Jean-Luc; Goulet, Jean-Richard; Choquette, Denis; Rich, Eric; Smith, Doug; Cividino, Alfred; Gladman, Dafna; St-Pierre, Yvan; Clarke, Ann E

2002-01-01

To evaluate the effect of Brief Supportive-Expressive Group Psychotherapy as an adjunct to standard medical care in reducing psychological distress, medical symptoms, and health care costs and improving quality of life in women with systemic lupus erythematosus (SLE). A randomized clinical trial was conducted with 133 SLE female patients from 9 clinics across Canada. Clinical and psychosocial measures were taken at baseline, posttreatment, and 6 and 12 months posttreatment. Outcomes assessed were psychological distress, quality of life, disease activity, health service utilization, and diminished productivity. Intention-to-treat analyses revealed that there were no clinically important group differences on any of the outcome measures. Although both groups improved over time on several measures (e.g., decreases in psychological distress, stress, and emotion-oriented coping), these changes could not be attributed to the psychotherapeutic intervention. Thus, evidence does not support the referral of these patients to this type of intervention.

Mobile Measurement of Methane and Ethane for the Detection and Attribution of Natural Gas Pipeline Leaks Using Off-Axis Integrated Output Spectroscopy

NASA Astrophysics Data System (ADS)

Leen, J. B.; Spillane, S.; Gardner, A.; Hansen, P. C.; Gupta, M.; Baer, D. S.

2015-12-01

Natural gas leaks pose a risk to public safety both because of potential explosions as well as from the greenhouse gas potential of fugitive methane. The rapid and cost effective detection of leaks in natural gas distribution is critical to providing a system that is safe for the public and the environment. Detection of methane from a mobile platform (vehicles, aircraft, etc.) is an accepted method of identifying leaks. A robust approach to differentiating pipeline gas (thermogenic) from other biogenic sources is the detection of ethane along with methane. Ethane is present in nearly all thermogenic gas but not in biogenic sources and its presence can be used to positively identify a gas sample. We present a mobile system for the simultaneous measurement of methane and ethane that is capable of detecting pipeline leaks and differentiating pipeline gas from other biogenic sources such as landfills, swamps, sewers, and enteric fermentation. The mobile system consists of a high precision GPS, sonic anemometer, and methane/ethane analyzer based on off-axis integrated cavity output spectroscopy (OA-ICOS). In order to minimize the system cost and facilitate the wide use of mobile leak detection, the analyzer operates in the near-infrared portion of the spectrum where lasers and optics are significantly less costly than in the mid-infrared. The analyzer is capable of detecting methane with a precision of <2 ppb (1σ in 1 sec) and detecting ethane with a precision of <30 ppb (1σ in 1 sec). Additionally, measurement rates of 5 Hz allow for detection of leaks at speeds up to 50 mph. The sonic anemometer, GPS and analyzer inlet are mounted to a generic roof rack for attachment to available fleet vehicles. The system can detect leaks having a downwind concentration of as little as 10 ppb of methane above ambient, while leaks 500 ppb above ambient can be identified as thermogenic with greater than 99% certainty (for gas with 6% ethane). Finally, analysis of wind data provides an estimate of leak direction and distance. The system presented provides a robust, cost effective solution to natural gas leak detection and attribution to maximize safety and minimize greenhouse gas impacts of distribution systems.

Microbiological and faunal soil attributes of coffee cultivation under different management systems in Brazil.

PubMed

Lammel, D R; Azevedo, L C B; Paula, A M; Armas, R D; Baretta, D; Cardoso, E J B N

2015-11-01

Brazil is the biggest coffee producer in the world and different plantation management systems have been applied to improve sustainability and soil quality. Little is known about the environmental effects of these different management systems, therefore, the goal of this study was to use soil biological parameters as indicators of changes. Soils from plantations in Southeastern Brazil with conventional (CC), organic (OC) and integrated management systems containing intercropping of Brachiaria decumbens (IB) or Arachis pintoi (IA) were sampled. Total organic carbon (TOC), microbial biomass carbon (MBC) and nitrogen (MBN), microbial activity (C-CO2), metabolic quotient (qCO2), the enzymes dehydrogenase, urease, acid phosphatase and arylsulphatase, arbuscular mycorrhizal fungi (AMF) colonization and number of spores and soil fauna were evaluated. The greatest difference between the management systems was seen in soil organic matter content. The largest quantity of TOC was found in the OC, and the smallest was found in IA. TOC content influenced soil biological parameters. The use of all combined attributes was necessary to distinguish the four systems. Each management presented distinct faunal structure, and the data obtained with the trap method was more reliable than the TSBF (Tropical Soils) method. A canonic correlation analysis showed that Isopoda was correlated with TOC and the most abundant order with OC. Isoptera was the most abundant faunal order in IA and correlated with MBC. Overall, OC had higher values for most of the biological measurements and higher populations of Oligochaeta and Isopoda, corroborating with the concept that the OC is a more sustainable system.

A greenhouse-gas information system monitoring and validating emissions reporting and mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jonietz, Karl K; Dimotakis, Paul E; Roman, Douglas A

2011-09-26

Current GHG-mitigating regimes, whether internationally agreed or self-imposed, rely on the aggregation of self-reported data, with limited checks for consistency and accuracy, for monitoring. As nations commit to more stringent GHG emissions-mitigation actions and as economic rewards or penalties are attached to emission levels, self-reported data will require independent confirmation that they are accurate and reliable, if they are to provide the basis for critical choices and actions that may be required. Supporting emissions-mitigation efforts and agreements, as well as monitoring energy- and fossil-fuel intensive national and global activities would be best achieved by a process of: (1) monitoring ofmore » emissions and emission-mitigation actions, based, in part, on, (2) (self-) reporting of pertinent bottom-up inventory data, (3) verification that reported data derive from and are consistent with agreed-upon processes and procedures, and (4) validation that reported emissions and emissions-mitigation action data are correct, based on independent measurements (top-down) derived from a suite of sensors in space, air, land, and, possibly, sea, used to deduce and attribute anthropogenic emissions. These data would be assessed and used to deduce and attribute measured GHG concentrations to anthropogenic emissions, attributed geographically and, to the extent possible, by economic sector. The validation element is needed to provide independent assurance that emissions are in accord with reported values, and should be considered as an important addition to the accepted MRV process, leading to a MRV&V process. This study and report focus on attributes of a greenhouse-gas information system (GHGIS) needed to support MRV&V needs. These needs set the function of such a system apart from scientific/research monitoring of GHGs and carbon-cycle systems, and include (not exclusively): the need for a GHGIS that is operational, as required for decision-support; the need for a system that meets specifications derived from imposed requirements; the need for rigorous calibration, verification, and validation (CV&V) standards, processes, and records for all measurement and modeling/data-inversion data; the need to develop and adopt an uncertainty-quantification (UQ) regimen for all measurement and modeling data; and the requirement that GHGIS products can be subjected to third-party questioning and scientific scrutiny. This report examines and assesses presently available capabilities that could contribute to a future GHGIS. These capabilities include sensors and measurement technologies; data analysis and data uncertainty quantification (UQ) practices and methods; and model-based data-inversion practices, methods, and their associated UQ. The report further examines the need for traceable calibration, verification, and validation processes and attached metadata; differences between present science-/research-oriented needs and those that would be required for an operational GHGIS; the development, operation, and maintenance of a GHGIS missions-operations center (GMOC); and the complex systems engineering and integration that would be required to develop, operate, and evolve a future GHGIS. Present monitoring systems would be heavily relied on in any GHGIS implementation at the outset and would likely continue to provide valuable future contributions to GHGIS. However, present monitoring systems were developed to serve science/research purposes. This study concludes that no component or capability presently available is at the level of technological maturity and readiness required for implementation in an operational GHGIS today. However, purpose-designed and -built components could be developed and implemented in support of a future GHGIS. The study concludes that it is possible to develop and provide a capability-driven prototype GHGIS, as part of a Phase-1 effort, within three years from project-funding start, that would make use of and integrate existing sensing and system capabilities. As part of a Phase-2 effort, a requirements-driven, operational GHGIS could be developed, within ten years from project funding start. That schedule is driven by the development and long lead-times for some system components. The two efforts would be focused on different deliverables but could commence concurrently, to save time, if that was deemed desirable. We note that, developing and supporting an operational GHGIS will require a new approach and management, sustained funding and other support, as well as technical advances and development of purpose-built components that meet the requisite specifications. A functioning GHGIS will provide the basis for reasoned choices on how best to respond to rising GHG levels, especially when proposed U.S. actions are compared with or conditioned on the actions of other nations.« less

Geometric state space uncertainty as a new type of uncertainty addressing disparity in ';emergent properties' between real and modeled systems

NASA Astrophysics Data System (ADS)

Montero, J. T.; Lintz, H. E.; Sharp, D.

2013-12-01

Do emergent properties that result from models of complex systems match emergent properties from real systems? This question targets a type of uncertainty that we argue requires more attention in system modeling and validation efforts. We define an ';emergent property' to be an attribute or behavior of a modeled or real system that can be surprising or unpredictable and result from complex interactions among the components of a system. For example, thresholds are common across diverse systems and scales and can represent emergent system behavior that is difficult to predict. Thresholds or other types of emergent system behavior can be characterized by their geometry in state space (where state space is the space containing the set of all states of a dynamic system). One way to expedite our growing mechanistic understanding of how emergent properties emerge from complex systems is to compare the geometry of surfaces in state space between real and modeled systems. Here, we present an index (threshold strength) that can quantify a geometric attribute of a surface in state space. We operationally define threshold strength as how strongly a surface in state space resembles a step or an abrupt transition between two system states. First, we validated the index for application in greater than three dimensions of state space using simulated data. Then, we demonstrated application of the index in measuring geometric state space uncertainty between a real system and a deterministic, modeled system. In particular, we looked at geometric space uncertainty between climate behavior in 20th century and modeled climate behavior simulated by global climate models (GCMs) in the Coupled Model Intercomparison Project phase 5 (CMIP5). Surfaces from the climate models came from running the models over the same domain as the real data. We also created response surfaces from a real, climate data based on an empirical model that produces a geometric surface of predicted values in state space. We used a kernel regression method designed to capture the geometry of real data pattern without imposing shape assumptions a priori on the data; this kernel regression method is known as Non-parametric Multiplicative Regression (NPMR). We found that quantifying and comparing a geometric attribute in more than three dimensions of state space can discern whether the emergent nature of complex interactions in modeled systems matches that of real systems. Further, this method has potentially wider application in contexts where searching for abrupt change or ';action' in any hyperspace is desired.

Electric vehicle equipment for grid-integrated vehicles

DOEpatents

Kempton, Willett

2013-08-13

Methods, systems, and apparatus for interfacing an electric vehicle with an electric power grid are disclosed. An exemplary apparatus may include a station communication port for interfacing with electric vehicle station equipment (EVSE), a vehicle communication port for interfacing with a vehicle management system (VMS), and a processor coupled to the station communication port and the vehicle communication port to establish communication with the EVSE via the station communication port, receive EVSE attributes from the EVSE, and issue commands to the VMS to manage power flow between the electric vehicle and the EVSE based on the EVSE attributes. An electric vehicle may interface with the grid by establishing communication with the EVSE, receiving the EVSE attributes, and managing power flow between the EVE and the grid based on the EVSE attributes.

High School Students' Academic Causal Attributions in the Cultural-Political Context of the Arab School System in Israel

ERIC Educational Resources Information Center

Kaplan, Avi; Yahia, Yasmin

2017-01-01

While motivation is commonly interpreted as an individual student's characteristic, motivational perceptions and beliefs, such as causal attributions of success and failure, are embedded in cultural meanings and contextual practices. The current study aimed to investigate causal attributions among Arab high school students in Israel and to…

Protocol for Uniformly Measuring and Expressing the Performance of Energy Storage Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Crawford, Alasdair J.; Fuller, Jason

This Protocol provides a set of “best practices” for characterizing energy storage systems (ESSs) and measuring and reporting their performance. It serves as a basis for assessing how an ESS will perform with respect to key performance attributes relevant to different applications. It is intended to provide a valid and accurate basis for the comparison of different ESSs. By achieving the stated purpose, the Protocol will enable more informed decision-making in the selection of ESSs for various stationary applications. The Protocol identifies general information and technical specifications relevant in describing an ESS and also defines a set of test, measurement,more » and evaluation criteria with which to express the performance of ESSs that are intended for energy-intensive and/or power-intensive stationary applications. An ESS includes a storage device, battery management system, and any power conversion systems installed with the storage device. The Protocol is agnostic with respect to the storage technology and the size and rating of the ESS. The Protocol does not apply to single-use storage devices and storage devices that are not coupled with power conversion systems, nor does it address safety, security, or operations and maintenance of ESSs, or provide any pass/fail criteria.« less

Stochastic nature of Landsat MSS data

NASA Technical Reports Server (NTRS)

Labovitz, M. L.; Masuoka, E. J.

1987-01-01

A multiple series generalization of the ARIMA models is used to model Landsat MSS scan lines as sequences of vectors, each vector having four elements (bands). The purpose of this work is to investigate if Landsat scan lines can be described by a general multiple series linear stochastic model and if the coefficients of such a model vary as a function of satellite system and target attributes. To accomplish this objective, an exploratory experimental design was set up incorporating six factors, four representing target attributes - location, cloud cover, row (within location), and column (within location) - and two factors representing system attributes - satellite number and detector bank. Each factor was included in the design at two levels and, with two replicates per treatment, 128 scan lines were analyzed. The results of the analysis suggests that a multiple AR(4) model is an adequate representation across all scan lines. Furthermore, the coefficients of the AR(4) model vary with location, particularly changes in physiography (slope regimes), and with percent cloud cover, but are insensitive to changes in system attributes.

Regional disparities in the burden of disease attributable to unsafe water and poor sanitation in China

PubMed Central

Carlton, Elizabeth J; McDowell, Julia Z; Li, Huazhong; Luo, Wei; Remais, Justin V

2012-01-01

Abstract Objective To estimate the disease burden attributable to unsafe water and poor sanitation and hygiene in China, to identify high-burden groups and to inform improvement measures. Methods The disease burden attributable to unsafe water and poor sanitation and hygiene in China was estimated for diseases resulting from exposure to biologically contaminated soil and water (diarrhoeal disease, helminthiases and schistosomiasis) and vector transmission resulting from inadequate management of water resources (malaria, dengue and Japanese encephalitis). The data were obtained from China’s national infectious disease reporting system, national helminthiasis surveys and national water and sanitation surveys. The fraction of each health condition attributable to unsafe water and poor sanitation and hygiene in China was estimated from data in the Chinese and international literature. Findings In 2008, 327 million people in China lacked access to piped drinking water and 535 million lacked access to improved sanitation. The same year, unsafe water and poor sanitation and hygiene accounted for 2.81 million disability-adjusted life years (DALYs) and 62 800 deaths in the country, and 83% of the attributable burden was found in children less than 5 years old. Per capita DALYs increased along an east–west gradient, with the highest burden in inland provinces having the lowest income per capita. Conclusion Despite remarkable progress, China still needs to conduct infrastructural improvement projects targeting provinces that have experienced slower economic development. Improved monitoring, increased regulatory oversight and more government transparency are needed to better estimate the effects of microbiologically and chemically contaminated water and poor sanitation and hygiene on human health. PMID:22893741

Patients' and Caregivers' Attributes in a Meaningful Care Encounter: Similarities and Notable Differences

PubMed Central

Snellman, Ingrid; Gustafsson, Christine; Gustafsson, Lena-Karin

2012-01-01

In today's healthcare system, there is an imbalance between what patients expect of caregivers' care and their perception of the care they get. How is it possible to reduce this imbalance? The aim of this paper was to describe attributes associated with meaningful encounters in the Swedish healthcare system based on patients' and caregivers' written narratives and to note the differences and similarities between the attributes identified by the two groups. This paper is a qualitative descriptive study. The analysis was guided by qualitative content analyses. Based on patients' narratives, attributes associated with a meaningful encounter fell into four categories: the kind-hearted caregiver, the thoughtful caregiver, the mutually oriented caregiver, and the helpful caregiver. Based on caregivers' narratives, the attributes were categorized as being humane, caring through physical contact, caring by nurturing communication, joy and laughter in care, and a sense of mutuality. The results show that there are both similarities and differences in patients' and caregivers' opinions about the attributes of a meaningful encounter. Knowing more about the attributes associated with meaningful encounters makes it possible for caregivers to individualize care for patients and makes it easier to help and support patients in what they most need support with. PMID:22701802

Database of Ground-Water Levels in the Vicinity of Rainier Mesa, Nevada Test Site, Nye County, Nevada, 1957-2005

USGS Publications Warehouse

Fenelon, Joseph M.

2006-01-01

More than 1,200 water-level measurements from 1957 to 2005 in the Rainier Mesa area of the Nevada Test Site were quality assured and analyzed. Water levels were measured from 50 discrete intervals within 18 boreholes and from 4 tunnel sites. An interpretive database was constructed that describes water-level conditions for each water level measured in the Rainier Mesa area. Multiple attributes were assigned to each water-level measurement in the database to describe the hydrologic conditions at the time of measurement. General quality, temporal variability, regional significance, and hydrologic conditions are attributed for each water-level measurement. The database also includes hydrograph narratives that describe the water-level history of each well.

Advanced reliability modeling of fault-tolerant computer-based systems

NASA Technical Reports Server (NTRS)

Bavuso, S. J.

1982-01-01

Two methodologies for the reliability assessment of fault tolerant digital computer based systems are discussed. The computer-aided reliability estimation 3 (CARE 3) and gate logic software simulation (GLOSS) are assessment technologies that were developed to mitigate a serious weakness in the design and evaluation process of ultrareliable digital systems. The weak link is based on the unavailability of a sufficiently powerful modeling technique for comparing the stochastic attributes of one system against others. Some of the more interesting attributes are reliability, system survival, safety, and mission success.

Drive System Enhancement in the NASA Lewis Research Center Supersonic Wind Tunnels

NASA Technical Reports Server (NTRS)

Becks, Edward A.

1998-01-01

An overview of NASA Lewis' Aeropropulsion Wind Tunnel Productivity Improvements was presented at the 19th AIAA Advanced Measurement & Ground Testing Technology Conference. Since that time Lewis has implemented subsonic operation in their 10- by 10-Foot Supersonic Wind Tunnel as had been proven viable in the 8- by 6 and 9- by 15-Foot Wind Tunnel Complex and discussed at the aforementioned conference. In addition, two more years of data have been gathered to help quantify the true productivity increases in these facilities attributable to the drive system and operational improvements. This paper was invited for presentation at the 20th Advanced Measurement and Ground Testing Conference to discuss and quantify the productivity improvements in the 10- by 10 SWT since the implementation of less than full complement motor operation. An update on the increased productivity at the 8- by 6 and 9- by 15-Foot facility due to drive system enhancements will also be presented.

Developing information-space Confidence Building Measures (CBMs) between India and Pakistan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamin, Tughral

The Internet has changed the world in ways hitherto unknown. The international financial system, air, land and maritime transport systems are all digitally linked. Similarly most militaries are fully or partially networked. This has not only sped up the decision making processes at all levels, it has also rendered these systems vulnerable to cyber-attacks. Cyber-warfare is now recognized as the most potent form of non-kinetic war fighting. In order to prevent large scale network-attacks, cyber-powers are simultaneously spending a lot of time, money and effort to erect redundant cyber-defenses and enhancing their offensive cyber capabilities. Difficulties in creating a stablemore » environment in information-space stem from differing national perceptions regarding the freedom of the Internet, application of international law and problems associated with attribution. This paper discusses a range of Confidence Building Measures that can be created between India and Pakistan in information-space to control malicious cyber behavior and avert an inadvertent war.« less

Designing energy dissipation properties via thermal spray coatings

DOE PAGES

Brake, Matthew R. W.; Hall, Aaron Christopher; Madison, Jonathan D.

2016-12-14

The coefficient of restitution is a measure of energy dissipation in a system across impact events. Often, the dissipative qualities of a pair of impacting components are neglected during the design phase. This research looks at the effect of applying a thin layer of metallic coating, using thermal spray technologies, to significantly alter the dissipative properties of a system. We studied the dissipative properties across multiple impacts in order to assess the effects of work hardening, the change in microstructure, and the change in surface topography. The results of the experiments indicate that any work hardening-like effects are likely attributablemore » to the crushing of asperities, and the permanent changes in the dissipative properties of the system, as measured by the coefficient of restitution, are attributable to the microstructure formed by the thermal spray coating. Furthermore, the microstructure appears to be robust across impact events of moderate energy levels, exhibiting negligible changes across multiple impact events.« less

Designing energy dissipation properties via thermal spray coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brake, Matthew R. W.; Hall, Aaron Christopher; Madison, Jonathan D.

The coefficient of restitution is a measure of energy dissipation in a system across impact events. Often, the dissipative qualities of a pair of impacting components are neglected during the design phase. This research looks at the effect of applying a thin layer of metallic coating, using thermal spray technologies, to significantly alter the dissipative properties of a system. We studied the dissipative properties across multiple impacts in order to assess the effects of work hardening, the change in microstructure, and the change in surface topography. The results of the experiments indicate that any work hardening-like effects are likely attributablemore » to the crushing of asperities, and the permanent changes in the dissipative properties of the system, as measured by the coefficient of restitution, are attributable to the microstructure formed by the thermal spray coating. Furthermore, the microstructure appears to be robust across impact events of moderate energy levels, exhibiting negligible changes across multiple impact events.« less

Application of viscous and Iwan modal damping models to experimental measurements from bolted structures

DOE PAGES

Deaner, Brandon J.; Allen, Matthew S.; Starr, Michael James; ...

2015-01-20

Measurements are presented from a two-beam structure with several bolted interfaces in order to characterize the nonlinear damping introduced by the joints. The measurements (all at force levels below macroslip) reveal that each underlying mode of the structure is well approximated by a single degree-of-freedom (SDOF) system with a nonlinear mechanical joint. At low enough force levels, the measurements show dissipation that scales as the second power of the applied force, agreeing with theory for a linear viscously damped system. This is attributed to linear viscous behavior of the material and/or damping provided by the support structure. At larger forcemore » levels, the damping is observed to behave nonlinearly, suggesting that damping from the mechanical joints is dominant. A model is presented that captures these effects, consisting of a spring and viscous damping element in parallel with a four-parameter Iwan model. As a result, the parameters of this model are identified for each mode of the structure and comparisons suggest that the model captures the stiffness and damping accurately over a range of forcing levels.« less

Prediction of the cause, effects, and prevention of drug-nutrient interactions using attributes and attribute values.

PubMed

Roe, D A

1985-01-01

Drug-nutrient interactions and their adverse outcomes have previously been identified by observation, investigation, and literature reports. Knowing the attributes of the drugs, availability of knowledge base management systems for microcomputer use can facilitate prediction of the mechanism and the effects of drug-nutrient interactions. Examples used to illustrate this approach are prediction of lactose intolerance in drug-induced malabsorption, and prediction of the mechanism responsible for drug-induced flush reactions. In the future we see that there may be many opportunities to use this system further in the investigation of complex drug-nutrient interactions.

Growth and fillet quality attributes of five genetic strains of rainbow trout (Oncorhynchus mykiss) reared in a partial water reuse system and harvested at different sizes

USDA-ARS?s Scientific Manuscript database

Genetics and environment can interact to influence fish growth performance and product quality attributes. Interaction in recirculating aquaculture systems (RAS) makes selection of fish strain and harvest sizes critical for optimizing fish quality. Definition of growth performance and quality outcom...

Discrimination and Cumulative Disease Damage Among African American Women With Systemic Lupus Erythematosus.

PubMed

Chae, David H; Drenkard, Cristina M; Lewis, Tené T; Lim, S Sam

2015-10-01

We examined associations between unfair treatment, attributions of unfair treatment to racial discrimination, and cumulative disease damage among African American women with systemic lupus erythematosus (SLE). We used multivariable regression models to examine SLE damage among 578 African American women in metropolitan Atlanta, Georgia, recruited to the Georgians Organized Against Lupus cohort. When we controlled for demographic, socioeconomic, and health-related covariates, reporting any unfair treatment was associated with greater SLE damage compared with reporting no unfair treatment (b = 0.55; 95% confidence interval = 0.14, 0.97). In general, unfair treatment attributed to nonracial factors was more strongly associated with SLE damage than was unfair treatment attributed to racial discrimination, although the difference was not statistically significant. Unfair treatment may contribute to worse disease outcomes among African American women with SLE. Unfair treatment attributed to nonracial causes may have a more pronounced negative effect on SLE damage. Future research may further examine possible differences in the effect of unfair treatment by attribution.

Policy reconciliation for access control in dynamic cross-enterprise collaborations

NASA Astrophysics Data System (ADS)

Preuveneers, D.; Joosen, W.; Ilie-Zudor, E.

2018-03-01

In dynamic cross-enterprise collaborations, different enterprises form a - possibly temporary - business relationship. To integrate their business processes, enterprises may need to grant each other limited access to their information systems. Authentication and authorization are key to secure information handling. However, access control policies often rely on non-standardized attributes to describe the roles and permissions of their employees which convolutes cross-organizational authorization when business relationships evolve quickly. Our framework addresses the managerial overhead of continuous updates to access control policies for enterprise information systems to accommodate disparate attribute usage. By inferring attribute relationships, our framework facilitates attribute and policy reconciliation, and automatically aligns dynamic entitlements during the evaluation of authorization decisions. We validate our framework with a Industry 4.0 motivating scenario on networked production where such dynamic cross-enterprise collaborations are quintessential. The evaluation reveals the capabilities and performance of our framework, and illustrates the feasibility of liberating the security administrator from manually provisioning and aligning attributes, and verifying the consistency of access control policies for cross-enterprise collaborations.

Combined interpretation of 3D seismic reflection attributes for geothermal exploration in the Polish Basin using self-organizing maps

NASA Astrophysics Data System (ADS)

Bauer, Klaus; Pussak, Marcin; Stiller, Manfred; Bujakowski, Wieslaw

2014-05-01

Self-organizing maps (SOM) are neural network techniques which can be used for the joint interpretation of multi-disciplinary data sets. In this investigation we apply SOM within a geothermal exploration project using 3D seismic reflection data. The study area is located in the central part of the Polish basin. Several sedimentary target horizons were identified at this location based on fluid flow rate measurements in the geothermal research well Kompina-2. The general objective is a seismic facies analysis and characterization of the major geothermal target reservoir. A 3D seismic reflection experiment with a sparse acquisition geometry was carried out around well Kompina-2. Conventional signal processing (amplitude corrections, filtering, spectral whitening, deconvolution, static corrections, muting) was followed by normal-moveout (NMO) stacking, and, alternatively, by common-reflection-surface (CRS) stacking. Different signal attributes were then derived from the stacked images including root-mean-square (RMS) amplitude, instantaneous frequency and coherency. Furthermore, spectral decomposition attributes were calculated based on the continuous wavelet transform. The resulting attribute maps along major target horizons appear noisy after the NMO stack and clearly structured after the CRS stack. Consequently, the following SOM-based multi-parameter signal attribute analysis was applied only to the CRS images. We applied our SOM work flow, which includes data preparation, unsupervised learning, segmentation of the trained SOM using image processing techniques, and final application of the learned knowledge. For the Lower Jurassic target horizon Ja1 we derived four different clusters with distinct seismic attribute signatures. As the most striking feature, a corridor parallel to a fault system was identified, which is characterized by decreased RMS amplitudes and low frequencies. In our interpretation we assume that this combination of signal properties can be explained by increased fracture porosity and enhanced fluid saturation within this part of the Lower Jurassic sandstone horizon. Hence, we suggest that a future drilling should be carried out within this compartment of the reservoir.

Evolutionary Design of Controlled Structures

NASA Technical Reports Server (NTRS)

Masters, Brett P.; Crawley, Edward F.

1997-01-01

Basic physical concepts of structural delay and transmissibility are provided for simple rod and beam structures. Investigations show the sensitivity of these concepts to differing controlled-structures variables, and to rational system modeling effects. An evolutionary controls/structures design method is developed. The basis of the method is an accurate model formulation for dynamic compensator optimization and Genetic Algorithm based updating of sensor/actuator placement and structural attributes. One and three dimensional examples from the literature are used to validate the method. Frequency domain interpretation of these controlled structure systems provide physical insight as to how the objective is optimized and consequently what is important in the objective. Several disturbance rejection type controls-structures systems are optimized for a stellar interferometer spacecraft application. The interferometric designs include closed loop tracking optics. Designs are generated for differing structural aspect ratios, differing disturbance attributes, and differing sensor selections. Physical limitations in achieving performance are given in terms of average system transfer function gains and system phase loss. A spacecraft-like optical interferometry system is investigated experimentally over several different optimized controlled structures configurations. Configurations represent common and not-so-common approaches to mitigating pathlength errors induced by disturbances of two different spectra. Results show that an optimized controlled structure for low frequency broadband disturbances achieves modest performance gains over a mass equivalent regular structure, while an optimized structure for high frequency narrow band disturbances is four times better in terms of root-mean-square pathlength. These results are predictable given the nature of the physical system and the optimization design variables. Fundamental limits on controlled performance are discussed based on the measured and fit average system transfer function gains and system phase loss.

The effects of self-handicapping on attributions and perceived judo competence.

PubMed

Greenlees, Iain; Jones, Simon; Holder, Tim; Thelwell, Richard

2006-03-01

The aim of this study was to examine hypotheses derived from Jones and Berglas's (1978) self-handicapping model. It was hypothesized that individuals using many self-handicaps would use more internal attributions and report greater gains in perceived judo ability following success than individuals using few self-handicaps. In addition, it was hypothesized that individuals using many self-handicaps would use more external attributions and report less reduction in perceived judo ability following failure. Fifty-three judo players completed measures of trait self-handicapping, situational self-handicapping and a measure of perceived judo ability before competition. Following competition, the participants completed the Causal Dimension Scale II and the measure of perceived judo ability for a second time. Analyses of variance revealed that high self-handicappers attributed failure to more external factors than low self-handicappers. It was also found that high self-handicappers reported less of a reduction in perceived judo ability following failure than low self-handicappers. The findings therefore provide support for the potential short-term benefits of self-handicapping in sport, although further research is required to examine the long-term implications of using self-handicaps.

Some aspects of measuring levels of potassium in the brain

PubMed Central

Ramirez, L.M.; Coyle, P.; Heymsfield, S.; Zimman, J.

2007-01-01

The general aim of this work is to measure brain potassium (K) levels as a marker of intracellular water content and to test the hypothesis of whether edema in multiple sclerosis (MS) is associated with increased intracellular brain water. For that purpose, a system to measure K in brain is being developed. Our specific aim is to assess the potential contribution to the K photopeak from cranial K located outside the brain. For this, a simplified spherical phantom to represent the brain, a square box to represent the cranium, and a K point source to assess the contributions due to K outside the brain were used. It is estimated that only about 1–2% of the K photopeak might be attributable to K outside the brain. PMID:14618438

A continuation of base-line studies for environmentally monitoring space transportation systems at John F. Kennedy Space Center. Executive summary

NASA Technical Reports Server (NTRS)

Stout, I. J.

1980-01-01

Studies conducted in and around John F. Kennedy Space Center, Merrit Island, Florida were designed to establish baseline conditions for various attributes of the biotic and abiotic environment. Features were described and quantitatively measured. Certain condition were found to be appropriate for the detection and assessment of possible environmental perturbations caused by future NASA activities. These include plant communities, mammal populations, rainfall chemistry, fish populations, and the status of rare and endangered species. On the basis of statistical analysis of quantitative data and logistic considerations, it was possible to refine the kinds and amounts of measurements needed to evaluate perturbations in selected environmental components.

The Geoscience Laser Altimetry/Ranging System (GLARS)

NASA Technical Reports Server (NTRS)

Cohen, S. C.; Degnan, J. J.; Bufton, J. L.; Garvin, J. B.; Abshire, J. B.

1986-01-01

The Geoscience Laser Altimetry Ranging System (GLARS) is a highly precise distance measurement system to be used for making extremely accurate geodetic observations from a space platform. It combines the attributes of a pointable laser ranging system making observations to cube corner retroreflectors placed on the ground with those of a nadir looking laser altimeter making height observations to ground, ice sheet, and oceanic surfaces. In the ranging mode, centimeter-level precise baseline and station coordinate determinations will be made on grids consisting of 100 to 200 targets separated by distances from a few tens of kilometers to about 1000 km. These measurements will be used for studies of seismic zone crustal deformations and tectonic plate motions. Ranging measurements will also be made to a coarser, but globally distributed array of retroreflectors for both precise geodetic and orbit determination applications. In the altimetric mode, relative height determinations will be obtained with approximately decimeter vertical precision and 70 to 100 meter horizontal resolution. The height data will be used to study surface topography and roughness, ice sheet and lava flow thickness, and ocean dynamics. Waveform digitization will provide a measure of the vertical extent of topography within each footprint. The planned Earth Observing System is an attractive candidate platform for GLARS since the GLAR data can be used both for direct analyses and for highly precise orbit determination needed in the reduction of data from other sensors on the multi-instrument platform. (1064, 532, and 355 nm)Nd:YAG laser meets the performance specifications for the system.

A statistical approach to root system classification

PubMed Central

Bodner, Gernot; Leitner, Daniel; Nakhforoosh, Alireza; Sobotik, Monika; Moder, Karl; Kaul, Hans-Peter

2013-01-01

Plant root systems have a key role in ecology and agronomy. In spite of fast increase in root studies, still there is no classification that allows distinguishing among distinctive characteristics within the diversity of rooting strategies. Our hypothesis is that a multivariate approach for “plant functional type” identification in ecology can be applied to the classification of root systems. The classification method presented is based on a data-defined statistical procedure without a priori decision on the classifiers. The study demonstrates that principal component based rooting types provide efficient and meaningful multi-trait classifiers. The classification method is exemplified with simulated root architectures and morphological field data. Simulated root architectures showed that morphological attributes with spatial distribution parameters capture most distinctive features within root system diversity. While developmental type (tap vs. shoot-borne systems) is a strong, but coarse classifier, topological traits provide the most detailed differentiation among distinctive groups. Adequacy of commonly available morphologic traits for classification is supported by field data. Rooting types emerging from measured data, mainly distinguished by diameter/weight and density dominated types. Similarity of root systems within distinctive groups was the joint result of phylogenetic relation and environmental as well as human selection pressure. We concluded that the data-define classification is appropriate for integration of knowledge obtained with different root measurement methods and at various scales. Currently root morphology is the most promising basis for classification due to widely used common measurement protocols. To capture details of root diversity efforts in architectural measurement techniques are essential. PMID:23914200

A statistical approach to root system classification.

PubMed

Bodner, Gernot; Leitner, Daniel; Nakhforoosh, Alireza; Sobotik, Monika; Moder, Karl; Kaul, Hans-Peter

2013-01-01

Plant root systems have a key role in ecology and agronomy. In spite of fast increase in root studies, still there is no classification that allows distinguishing among distinctive characteristics within the diversity of rooting strategies. Our hypothesis is that a multivariate approach for "plant functional type" identification in ecology can be applied to the classification of root systems. The classification method presented is based on a data-defined statistical procedure without a priori decision on the classifiers. The study demonstrates that principal component based rooting types provide efficient and meaningful multi-trait classifiers. The classification method is exemplified with simulated root architectures and morphological field data. Simulated root architectures showed that morphological attributes with spatial distribution parameters capture most distinctive features within root system diversity. While developmental type (tap vs. shoot-borne systems) is a strong, but coarse classifier, topological traits provide the most detailed differentiation among distinctive groups. Adequacy of commonly available morphologic traits for classification is supported by field data. Rooting types emerging from measured data, mainly distinguished by diameter/weight and density dominated types. Similarity of root systems within distinctive groups was the joint result of phylogenetic relation and environmental as well as human selection pressure. We concluded that the data-define classification is appropriate for integration of knowledge obtained with different root measurement methods and at various scales. Currently root morphology is the most promising basis for classification due to widely used common measurement protocols. To capture details of root diversity efforts in architectural measurement techniques are essential.

ANALYZING CORRELATIONS BETWEEN STREAM AND WATERSHED ATTRIBUTES

EPA Science Inventory

Bivariate correlation analysis has been widely used to explore relationships between stream and watershed attributes that have all been measured on the same set of watersheds or sampling locations. Researchers routinely test H0: =0 for each correlation in a large table and then ...

EVALUATING THE CONDITION OF RIVERINE-RIPARIAN RESOURCES IN THE PACIFIC NORTHWEST

EPA Science Inventory

The evaluation of the condition of riverine-riparian resources at regional scales relies on the interpretation of measurements taken on a variety of attributes reflecting both status and processes governing status of these resources. Typical attributes include indicators of upsl...

Ecologically relevant geomorphic attributes of streams are impaired by even low levels of watershed effective imperviousness

NASA Astrophysics Data System (ADS)

Vietz, Geoff J.; Sammonds, Michael J.; Walsh, Christopher J.; Fletcher, Tim D.; Rutherfurd, Ian D.; Stewardson, Michael J.

2014-02-01

Urbanization almost inevitably results in changes to stream morphology. Understanding the mechanisms for such impacts is a prerequisite to minimizing stream degradation and achieving restoration goals. However, investigations of urban-induced changes to stream morphology typically use indicators of watershed urbanization that may not adequately represent degrading mechanisms and commonly focus on geomorphic attributes such as channel dimensions that may be of little significance to the ecological goals for restoration. We address these shortcomings by testing if a measure characterizing urban stormwater drainage system connections to streams (effective imperviousness, EI) is a better predictor of change to ecologically relevant geomorphic attributes than a more general measure of urban density (total imperviousness, TI). We test this for 17 sites in independent watersheds across a gradient of urbanization. We found that EI was a better predictor of all geomorphic variables tested than was TI. Bank instability was positively correlated with EI, while width/depth (a measure of channel incision), bedload sediment depth, and frequency of bars, benches, and large wood were negatively correlated. Large changes in all geomorphic variables were detected at very low levels of EI (< 2-3%). Excess urban stormwater runoff, as represented by EI, drives geomorphic change in urban streams, highlighting the dominant role of the stormwater drainage system in efficiently transferring stormwater runoff from impervious surfaces to the stream, as found for ecological indicators. It is likely that geomorphic condition of streams in urbanizing watersheds, particularly those attributes of ecological relevance, can only be maintained if excess urban stormwater flows are kept out of streams through retention and harvesting. The extent to which EI can be reduced within urban and urbanizing watersheds, through techniques such as distributed stormwater harvesting and infiltration, and the components of the hydrologic regime to be addressed, requires further investigation. Urbanization influences stream morphology more than any other land use (Douglas, 2011): it alters hydrology and sediment inputs leading to deepening and widening of streams (Chin, 2006). Concomitantly, urbanization often directly impairs stream morphology through channel and riparian zone interventions, e.g., culverts (Hawley et al., 2012), rock protection (Vietz et al., 2012b), and constricted floodplains (Gurnell et al., 2007). These changes to channel geomorphology in turn contribute to poor in-stream ecological condition (Morley and Karr, 2002; Walsh et al., 2005b; Gurnell et al., 2007; Elosegi et al., 2010).The common conception is that channels undergo gross morphologic alterations if > 10-20% of their watershed is covered by impervious surfaces (total imperviousness, TI; Bledsoe and Watson, 2001; Chin, 2006; Table 1). Many of these studies may, however, underestimate the influence of urbanization by using insensitive channel metrics and assessing streams in early stages of urbanization. Most importantly, TI, as a measure of urban density, may not adequately represent the way in which urbanization alters the master variables of flow and sediment within a watershed.Hydrologists have long recognized that, rather than the proportion of impervious cover within a watershed, it is the proportion that is directly connected to the stream through stormwater drainage systems that may be a better predictor of urban-induced hydrologic change (Leopold, 1968). Referred to as effective imperviousness (EI) the proportion of impervious cover directly connected to the stream through stormwater drainage systems may also be a better predictor of geomorphic response than is TI. Over the last decade a direct measure of EI has been found to be a better predictor of ecological response in urban streams (Walsh et al., 2012), but use of such a metric has not found its way into geomorphic studies even though TI has been found to be ineffective (e.g., Bledsoe et al., 2012). A direct measure of EI - one that specifically accounts for the drainage from each impervious surface rather than using a generic reduction factor (e.g., Booth and Jackson, 1997; Wang et al., 2001) - has not previously been used in geomorphic investigations. In this paper, we advance on past studies by testing if EI is a stronger predictor than TI for urban-induced channel change.A second limitation of previous studies of urban-induced morphologic change is the common focus on channel dimensions (Chin, 2006). These are important for infrastructure and flood protection but do not necessarily have a strong mechanistic link to stream ecosystems. While some notable exceptions exist (Finkenbine et al., 2000; McBride and Booth, 2005), other geomorphic attributes are rarely investigated.This study examines how urbanization of a watershed can result in the impairment of a suite of geomorphic attributes of relevance to aquatic ecosystem condition, such as large wood, sediment availability, and structural and hydraulic complexity (of the bed, bank, and water column), represented by the following variables:

Fiber-Optic Coupled Lidar Receiver System to Measure Stratospheric Ozone

NASA Technical Reports Server (NTRS)

Harper, David Brent; Elsayed-Ali, Hani

1998-01-01

The measurement of ozone in the atmosphere has become increasingly important over the past two decades. Significant increases of ozone concentrations in the lower atmosphere, or troposphere, and decreases in the upper atmosphere, or stratosphere, have been attributed to man-made causes. High ozone concentrations in the troposphere pose a health hazard to plants and animals and can add to global warming. On the other hand, ozone in the stratosphere serves as a protective barrier against strong ultraviolet (UV) radiation from the sun. Man-made CFC's (chlorofluorocarbons) act as a catalyst with a free oxygen atom and an ozone molecule to produce two oxygen molecules therefore depleting the protective layer of ozone in the stratosphere. The beneficial and harmful effects of ozone require the study of ozone creation and destruction processes in the atmosphere. Therefore, to provide an accurate model of these processes, an ozone lidar system must be able to be used frequently with as large a measurement range as possible. Various methods can be used to measure atmospheric ozone concentrations. These include different airborne and balloon measurements, solar occulation satellite techniques, and the use of lasers in lidar (high detection and ranging,) systems to probe the atmosphere. Typical devices such as weather balloons can only measure within the direct vicinity of the instrument and are therefore used infrequently. Satellites use solar occulation techniques that yield low horizontal and vertical resolution column densities of ozone.

Memory characteristics of metal-oxide-semiconductor structures based on Ge nanoclusters-embedded GeO(x) films grown at low temperature.

PubMed

Lin, Tzu-Shun; Lou, Li-Ren; Lee, Ching-Ting; Tsai, Tai-Cheng

2012-03-01

The memory devices constructed from the Ge-nanoclusters embedded GeO(x) layer deposited by the laser-assisted chemical vapor deposition (LACVD) system were fabricated. The Ge nanoclusters were observed by a high-resolution transmission electron microscopy. Using the capacitance versus voltage (C-V) and the conductance versus voltage (G-V) characteristics measured under various frequencies, the memory effect observed in the C-V curves was dominantly attributed to the charge storage in the Ge nanoclusters. Furthermore, the defects existed in the deposited film and the interface states were insignificant to the memory performances. Capacitance versus time (C-t) measurement was also executed to evaluate the charge retention characteristics. The charge storage and retention behaviors of the devices demonstrated that the Ge nanoclusters grown by the LACVD system at low temperature are promising for memory device applications.

Aero-acoustic design and test of a multiple splitter exhaust noise suppressor for a 0.914m diameter lift fan

NASA Technical Reports Server (NTRS)

Stimpert, D. L.

1973-01-01

A lift fan exhaust suppression system to meet future VTOL aircraft noise goals was designed and tested. The test vehicle was a 1.3 pressure ratio, 36 inch (91.44 cm) diameter lift fan with two chord rotor to stator spacing. A two splitter fan exhaust suppression system thirty inches (76.2 cm) long achieved 10 PNdB exhaust suppression in the aft quadrant compared to a design value of 20 PNdB. It was found that a broadband noise floor limited the realizable suppression. An analytical investigation of broadband noise generated by flow over the treatment surfaces provided very good agreement with the measured suppression levels and noise floor sound power levels. A fan thrust decrement of 22% was measured for the fully suppressed configuration of which 11.1% was attributed to the exhaust suppression hardware.

Contribution to the development of low frequency terahertz coherent Raman micro-spectroscopy and microscopy

NASA Astrophysics Data System (ADS)

Ujj, Laszlo

2018-06-01

We report the construction and characterization of a coherent Raman tabletop system utilizing a novel astigmatic optical focusing geometry, a broadband nanosecond optical parametric oscillator and volumetric Bragg filters assisting 3CBCRS measuring system for the first time. In order to illustrate the versatility of the measurements and reveal the molecular information obtainable, two well-characterized chemicals were selected. Polarization sensitive epi-detected 3CBCRS spectra of liquid CCl4 and calcite crystal were recorded and analyzed. An unexpected polarization dependence of the signals of the lowest frequency modes of CCl4 was observed. The 1122 third order susceptibility component was phase flipped. The non-resonant susceptibility normalized 1122 component was found to be larger than the 1111 component for the lowest vibrational modes. This anomalous comportment was attributable to the anisotropy Raman tensor invariant in the third order nonlinear susceptibility tensor.

Using information Theory in Optimal Test Point Selection for Health Management in NASA's Exploration Vehicles

NASA Technical Reports Server (NTRS)

Mehr, Ali Farhang; Tumer, Irem

2005-01-01

In this paper, we will present a new methodology that measures the "worth" of deploying an additional testing instrument (sensor) in terms of the amount of information that can be retrieved from such measurement. This quantity is obtained using a probabilistic model of RLV's that has been partially developed in the NASA Ames Research Center. A number of correlated attributes are identified and used to obtain the worth of deploying a sensor in a given test point from an information-theoretic viewpoint. Once the information-theoretic worth of sensors is formulated and incorporated into our general model for IHM performance, the problem can be formulated as a constrained optimization problem where reliability and operational safety of the system as a whole is considered. Although this research is conducted specifically for RLV's, the proposed methodology in its generic form can be easily extended to other domains of systems health monitoring.

Charged-particle emission tomography

PubMed Central

Ding, Yijun; Caucci, Luca; Barrett, Harrison H.

2018-01-01

Purpose Conventional charged-particle imaging techniques —such as autoradiography —provide only two-dimensional (2D) black ex vivo images of thin tissue slices. In order to get volumetric information, images of multiple thin slices are stacked. This process is time consuming and prone to distortions, as registration of 2D images is required. We propose a direct three-dimensional (3D) autoradiography technique, which we call charged-particle emission tomography (CPET). This 3D imaging technique enables imaging of thick tissue sections, thus increasing laboratory throughput and eliminating distortions due to registration. CPET also has the potential to enable in vivo charged-particle imaging with a window chamber or an endoscope. Methods Our approach to charged-particle emission tomography uses particle-processing detectors (PPDs) to estimate attributes of each detected particle. The attributes we estimate include location, direction of propagation, and/or the energy deposited in the detector. Estimated attributes are then fed into a reconstruction algorithm to reconstruct the 3D distribution of charged-particle-emitting radionuclides. Several setups to realize PPDs are designed. Reconstruction algorithms for CPET are developed. Results Reconstruction results from simulated data showed that a PPD enables CPET if the PPD measures more attributes than just the position from each detected particle. Experiments showed that a two-foil charged-particle detector is able to measure the position and direction of incident alpha particles. Conclusions We proposed a new volumetric imaging technique for charged-particle-emitting radionuclides, which we have called charged-particle emission tomography (CPET). We also proposed a new class of charged-particle detectors, which we have called particle-processing detectors (PPDs). When a PPD is used to measure the direction and/or energy attributes along with the position attributes, CPET is feasible. PMID:28370094

Charged-particle emission tomography.

PubMed

Ding, Yijun; Caucci, Luca; Barrett, Harrison H

2017-06-01

Conventional charged-particle imaging techniques - such as autoradiography - provide only two-dimensional (2D) black ex vivo images of thin tissue slices. In order to get volumetric information, images of multiple thin slices are stacked. This process is time consuming and prone to distortions, as registration of 2D images is required. We propose a direct three-dimensional (3D) autoradiography technique, which we call charged-particle emission tomography (CPET). This 3D imaging technique enables imaging of thick tissue sections, thus increasing laboratory throughput and eliminating distortions due to registration. CPET also has the potential to enable in vivo charged-particle imaging with a window chamber or an endoscope. Our approach to charged-particle emission tomography uses particle-processing detectors (PPDs) to estimate attributes of each detected particle. The attributes we estimate include location, direction of propagation, and/or the energy deposited in the detector. Estimated attributes are then fed into a reconstruction algorithm to reconstruct the 3D distribution of charged-particle-emitting radionuclides. Several setups to realize PPDs are designed. Reconstruction algorithms for CPET are developed. Reconstruction results from simulated data showed that a PPD enables CPET if the PPD measures more attributes than just the position from each detected particle. Experiments showed that a two-foil charged-particle detector is able to measure the position and direction of incident alpha particles. We proposed a new volumetric imaging technique for charged-particle-emitting radionuclides, which we have called charged-particle emission tomography (CPET). We also proposed a new class of charged-particle detectors, which we have called particle-processing detectors (PPDs). When a PPD is used to measure the direction and/or energy attributes along with the position attributes, CPET is feasible. © 2017 The Authors. Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Sympathy Crying: Insights from Infrared Thermal Imaging on a Female Sample

PubMed Central

Morris, Paul; Terry, Samantha; Baker, Marc; Gallese, Vittorio; Reddy, Vasudevi

2016-01-01

Sympathy crying is an odd and complex mixture of physiological and emotional phenomena. Standard psychophysiological theories of emotion cannot attribute crying to a single subdivision of the autonomic nervous system (ANS) and disagreement exists regarding the emotional origin of sympathy crying. The current experiment examines sympathy crying using functional thermal infrared imaging (FTII), a novel contactless measure of ANS activity. To induce crying female participants were given the choice to decide which film they wanted to cry to. Compared to baseline, temperature started increasing on the forehead, the peri-orbital region, the cheeks and the chin before crying and reached even higher temperatures during crying. The maxillary area showed the opposite pattern and a gradual temperature decrease was observed compared to baseline as a result of emotional sweating. The results suggest that tears of sympathy are part of a complex autonomic interaction between the sympathetic and the parasympathetic nervous systems, with the latter preceding the former. The emotional origin of the phenomenon seems to derive from subjective internal factors that relate to one’s personal experiences and attributes with tears arising in the form of catharses or as part of shared sadness. PMID:27716801

Assessment and mapping of water pollution indices in zone-III of municipal corporation of hyderabad using remote sensing and geographic information system.

PubMed

Asadi, S S; Vuppala, Padmaja; Reddy, M Anji

2005-01-01

A preliminary survey of area under Zone-III of MCH was undertaken to assess the ground water quality, demonstrate its spatial distribution and correlate with the land use patterns using advance techniques of remote sensing and geographical information system (GIS). Twenty-seven ground water samples were collected and their chemical analysis was done to form the attribute database. Water quality index was calculated from the measured parameters, based on which the study area was classified into five groups with respect to suitability of water for drinking purpose. Thematic maps viz., base map, road network, drainage and land use/land cover were prepared from IRS ID PAN + LISS III merged satellite imagery forming the spatial database. Attribute database was integrated with spatial sampling locations map in Arc/Info and maps showing spatial distribution of water quality parameters were prepared in Arc View. Results indicated that high concentrations of total dissolved solids (TDS), nitrates, fluorides and total hardness were observed in few industrial and densely populated areas indicating deteriorated water quality while the other areas exhibited moderate to good water quality.

Modeling of lung cancer risk due to radon exhalation of granite stone in dwelling houses.

PubMed

Abbasi, Akbar

2017-01-01

Due to increasing occurrences of lung cancer, radon exhalation rates, radon concentrations, and lung cancer risks in several types of commonly used granite stone, samples used for flooring in buildings, have been investigated. We measured the radon exhalation rates due to granite stones by means of an AlphaGUARD Model PQ2000 in a cube container with changeable floor by various granite stones. The lung cancer risk and percentage of lung cancer deaths (LCRn) due to those conditions were calculated using Darby's model. The radon exhalation rates ranged from 1.59 ± 0.41 to 9.43 ± 0.74 Bq/m 2/h. The radon concentrations in the standard room with poor and normal ventilation were calculated 20.10-71.09 Bq/m 3 and 16.12-47.01 Bq/m 3, respectively. The estimated numbers of lung cancer deaths attributable to indoor radon due to granite stones in 2013 were 145 (3.33%) and 103 (2.37%) for poor and normal ventilation systems, respectively. According to our estimations, the values of 3.33% and 2.37% of lung cancer deaths in 2013 are attributed to radon exhalation of granite stones with poor and normal ventilation systems, respectively.

Gradual Reduction in Sodium Content in Cooked Ham, with Corresponding Change in Sensorial Properties Measured by Sensory Evaluation and a Multimodal Machine Vision System

PubMed Central

Greiff, Kirsti; Mathiassen, John Reidar; Misimi, Ekrem; Hersleth, Margrethe; Aursand, Ida G.

2015-01-01

The European diet today generally contains too much sodium (Na+). A partial substitution of NaCl by KCl has shown to be a promising method for reducing sodium content. The aim of this work was to investigate the sensorial changes of cooked ham with reduced sodium content. Traditional sensorial evaluation and objective multimodal machine vision were used. The salt content in the hams was decreased from 3.4% to 1.4%, and 25% of the Na+ was replaced by K+. The salt reduction had highest influence on the sensory attributes salty taste, after taste, tenderness, hardness and color hue. The multimodal machine vision system showed changes in lightness, as a function of reduced salt content. Compared to the reference ham (3.4% salt), a replacement of Na+-ions by K+-ions of 25% gave no significant changes in WHC, moisture, pH, expressed moisture, the sensory profile attributes or the surface lightness and shininess. A further reduction of salt down to 1.7–1.4% salt, led to a decrease in WHC and an increase in expressible moisture. PMID:26422367

Gradual Reduction in Sodium Content in Cooked Ham, with Corresponding Change in Sensorial Properties Measured by Sensory Evaluation and a Multimodal Machine Vision System.

PubMed

Greiff, Kirsti; Mathiassen, John Reidar; Misimi, Ekrem; Hersleth, Margrethe; Aursand, Ida G

2015-01-01

The European diet today generally contains too much sodium (Na(+)). A partial substitution of NaCl by KCl has shown to be a promising method for reducing sodium content. The aim of this work was to investigate the sensorial changes of cooked ham with reduced sodium content. Traditional sensorial evaluation and objective multimodal machine vision were used. The salt content in the hams was decreased from 3.4% to 1.4%, and 25% of the Na(+) was replaced by K(+). The salt reduction had highest influence on the sensory attributes salty taste, after taste, tenderness, hardness and color hue. The multimodal machine vision system showed changes in lightness, as a function of reduced salt content. Compared to the reference ham (3.4% salt), a replacement of Na(+)-ions by K(+)-ions of 25% gave no significant changes in WHC, moisture, pH, expressed moisture, the sensory profile attributes or the surface lightness and shininess. A further reduction of salt down to 1.7-1.4% salt, led to a decrease in WHC and an increase in expressible moisture.

Fundamentals and industrial applications of ultrashort pulsed lasers at Bosch

NASA Astrophysics Data System (ADS)

König, Jens; Bauer, Thorsten

2011-03-01

Fundamental results of ablation processes of metals with ultrashort laser pulses in the far threshold fluence regime are shown and discussed. Time-resolved measurements of the plasma transmission exhibit two distinctive minima. The minima occurring within the first nanoseconds can be attributed to electrons and sublimated material emitted from the target surface, whereas the subsequent minimum after several 10 ns is due to particles and droplets after a thermal boiling process. Industrial applications of ultrashort pulsed laser micro machining in the Bosch Group are also shown with the production of exhaust gas sensors and common rail diesel systems. Since 2007, ultrashort laser pulses are used at the BOSCH plant in Bamberg for producing lambda-probes, which are made of a special ceramic layer system and can measure the exhaust gas properties faster and more accurately. This enables further reduction of emissions by optimized combustion control. Since 2009, BOSCH uses ultrashort pulsed lasers for micro-structuring the injector of common rail diesel systems. A drainage groove allows a tight system even at increased pressures up to 2000 bar. Diesel injection is thus even more reliable, powerful and environment-friendly.

Application of Linear Array Imaging Techniques to the Real-Time Inspection of Airframe Structures and Substructures

NASA Technical Reports Server (NTRS)

Miller, James G. (Principal Investigator)

1996-01-01

Current concern for ensuring, the air-worthiness of the aging commercial air fleet has prompted the establishment of broad-agency programs to develop NDT technologies that address specific aging-aircraft issues. One of the crucial technological needs that has been identified is the development of rapid, quantitative systems for depot-level inspection of bonded aluminum lap joints on aircraft. Research results for characterization of disbond and corrosion based on normal-incidence pulse-echo measurement geometries are showing promise, but are limited by the single-site nature of the measurement which requires manual or mechanical scanning to inspect an area. One approach to developing efficient systems may be to transfer specific aspects of current medical imaging technology to the NDT arena. Ultrasonic medical imaging, systems offer many desirable attributes for large scale inspection. They are portable, provide real-time imaging, and have integrated video tape recorder and printer capabilities available for documentation and post-inspection review. Furthermore, these systems are available at a relatively low cost (approximately $50,000 to $200,000) and can be optimized for use with metals with straight-forward modifications.

Graduate Attributes for Master's Programs in Health Services and Policy Research: Results of a National Consultation

PubMed Central

Morgan, Steve; Orr, Karen; Mah, Catherine

2010-01-01

Objective: Our objective was to identify desirable attributes to be developed through graduate training in health services and policy research (HSPR) by identifying the knowledge, skills and abilities thought to be keys to success in HSPR-related careers. We aimed for a framework clear enough to serve as a touchstone for HSPR training programs across Canada yet flexible enough to permit diversity of specialization across and within those programs. Methods: Our approach involved several stages of data collection and analysis: a review of literature; telephone interviews with opinion leaders; online surveys of HSPR students, recent graduates and employers; an invitational workshop; and an interactive panel at a national conference. Our final framework was arrived at through an iterative process of thematic analysis, reflection on invited feedback from consultation participants and triangulation with existing competency frameworks. Results: Our final result was a framework that identifies traits, knowledge and abilities of master's-level graduates who are capable of fostering health system improvement through planning, management, analysis or monitoring that is informed by credible evidence and relevant theory. These attributes are organized into three levels: generic graduate attributes, knowledge related to health and health systems and, finally, attributes related to the application of knowledge for health system improvement. The HSPR-specific attributes include not only an understanding of HSPR theories and methods but also the skills related to the practical application of knowledge in the complex environments of health system decision-making and healthcare policy. Conclusion: Master's-level HSPR training programs should prepare students to pose and seek answers to important questions and provide them with the skills necessary to apply their knowledge within complex decision-making environments. PMID:21804839

The impact of front-of-pack marketing attributes versus nutrition and health information on parents' food choices.

PubMed

Georgina Russell, Catherine; Burke, Paul F; Waller, David S; Wei, Edward

2017-09-01

Front-of-pack attributes have the potential to affect parents' food choices on behalf of their children and form one avenue through which strategies to address the obesogenic environment can be developed. Previous work has focused on the isolated effects of nutrition and health information (e.g. labeling systems, health claims), and how parents trade off this information against co-occurring marketing features (e.g. product imagery, cartoons) is unclear. A Discrete Choice Experiment was utilized to understand how front-of-pack nutrition, health and marketing attributes, as well as pricing, influenced parents' choices of cereal for their child. Packages varied with respect to the two elements of the Australian Health Star Rating system (stars and nutrient facts panel), along with written claims, product visuals, additional visuals, and price. A total of 520 parents (53% male) with a child aged between five and eleven years were recruited via an online panel company and completed the survey. Product visuals, followed by star ratings, were found to be the most significant attributes in driving choice, while written claims and other visuals were the least significant. Use of the Health Star Rating (HSR) system and other features were related to the child's fussiness level and parents' concerns about their child's weight with parents of fussy children, in particular, being less influenced by the HSR star information and price. The findings suggest that front-of-pack health labeling systems can affect choice when parents trade this information off against marketing attributes, yet some marketing attributes can be more influential, and not all parents utilize this information in the same way. Copyright © 2017. Published by Elsevier Ltd.

Practice assistants in primary care in Germany - associations with organizational attributes on job satisfaction.

PubMed

Gavartina, Amina; Zaroti, Stavria; Szecsenyi, Joachim; Miksch, Antje; Ose, Dominik; Campbell, Stephen M; Goetz, Katja

2013-08-05

Job satisfaction and organizational attributes in primary care teams are important issues as they affect clinical outcomes and the quality of health care provided. As practice assistants are an integral part of these teams it is important to gain insight into their views on job satisfaction and organizational attributes. The aim of this study was to evaluate the job satisfaction of practice assistants and the organizational attributes within their general practices in Germany and to explore the existence of possible associations. This observational study was based on a job satisfaction survey and measurement of organizational attributes in general practices in the German federal state of Baden-Wuerttemberg. Job satisfaction was measured with the 10-item 'Warr-Cook-Wall job satisfaction scale'. Organizational attributes were evaluated with the 21-items 'survey of organizational attributes for primary care' (SOAPC). Linear regression analyses were performed in which each of SOAPC scales and the overall score of SOAPC was treated as outcome variables. 586 practice assistants out of 794 respondents (73.8%) from 234 general practices completed the questionnaire. Practice assistants were mostly satisfied with their colleagues and least of all satisfied with their income and recognition for their work. The regression analysis showed that 'freedom of working method' and 'recognition of work', the employment status of practice assistants and the mode of practice were almost always significantly associated with each subscale and overall score of SOAPC. Job satisfaction is highly associated with different aspects of organizational attributes for primary care ('communication', 'decision-making' and 'stress'). Consequently, improved job satisfaction could lead to a better-organized primary care team. This implication should be investigated directly in further intervention studies with a special focus on improving the recognition for work and income.

Textural, nutritional and functional attributes in tomato genotypes for breeding better quality varieties.

PubMed

Saha, Supradip; Hedau, Nirmal K; Mahajan, Vinay; Singh, Gyanendra; Gupta, Hari S; Gahalain, Anita

2010-01-30

Screening of natural biodiversity for their better quality attributes is of prime importance for quality breeding programmes. A set of 53 tomato genotypes was measured for their textural [skin firmness, pericarp thickness, total soluble solids (TSS)], nutritional [phosphorus (P), potassium (K), iron (Fe), zinc (Zn), copper (Cu), manganese (Mn) and titrable acidity (TA)] and functional (beta-carotene, lycopene and ascorbic acid) quality attributes. Three sets of data (textural, nutritional and functional attributes) were obtained and analysed for their mutual relationships. Wide variations were observed in most of the measurements, e.g. skin firmness (coefficient of variability (CV) 269-612 g), pericarp thickness (CV 1.4-4.9 mm), potassium (CV 229-371 mg 100 g(-1)), iron (CV 611-1772 mg 100 g(-1)), ascorbic acid (CV 12-86 mg 100 g(-1)), suggesting that there are considerable levels of genetic diversity. Significant correlations (P < 0.05, 0.01) were also detected among different attributes of tomato genotypes, such as phosphorus and zinc with a correlation coefficient of 0.74, ascorbic acid and copper of 0.57, pericarp thickness and lycopene of - 0.52. However, there were no correlations between textural and nutritional attributes. Five factors were computed by principal component analysis that explained 66% of the variation in the attributes, among which all micronutrients other than iron, TSS, firmness and beta-carotene were most important. Functional attributes except beta-carotene played a less important role in explaining total variation. This knowledge could aid in the efficient conservation of important parts of the agricultural biodiversity of India. These results are also potentially useful for tomato breeders working on the development of new varieties. (c) 2009 Society of Chemical Industry.

Extreme Attributions Predict the Course of Bipolar Depression: Results from the STEP-BD Randomized Controlled Trial of Psychosocial Treatment

PubMed Central

Stange, Jonathan P.; Sylvia, Louisa G.; da Silva Magalhães, Pedro Vieira; Miklowitz, David J.; Otto, Michael W.; Frank, Ellen; Berk, Michael; Nierenberg, Andrew A.; Deckersbach, Thilo

2013-01-01

Objective Little is known about predictors of recovery from bipolar depression or moderators of treatment response. In the present study we investigated attributional style (a cognitive pattern of explaining the causes of life events) as a predictor of recovery from episodes of bipolar depression and as a moderator of response to psychotherapy for bipolar depression. Method 106 depressed outpatients with DSM-IV bipolar I or II disorder enrolled in the Systematic Treatment Enhancement Program for Bipolar Disorder (STEP-BD) were randomized to intensive psychotherapy for depression (n=62), or collaborative care (n=44), a minimal psychoeducational intervention. The primary outcome was recovery status at each study visit as measured by the Clinical Monitoring Form. Attributional style was measured at baseline using the Attributional Style Questionnaire. Data were collected between 1998 and 2005. Results All analyses were by intention to treat. Extreme attributions predicted a lower likelihood of recovery (p=.01, OR=0.93, 95% CI=.88-.98) and longer time until recovery (p<.01, OR=0.96, 95% CI=.93-.99), independent of the effects of initial depression severity. Among individuals with more pessimistic attributional styles, initial depression severity predicted a lower likelihood of recovery (p=.01, OR=0.64, 95% CI=.45-.91) and longer time until recovery (p<.001, OR=0.76, 95% CI=.66-.88). There was no difference in recovery rates between intensive psychotherapy and collaborative care (OR=0.90, 95% CI=0.40-2.01) in the full sample. Conclusions These results suggest that extreme, rigid attributions may be associated with a more severe course of depression, and that evaluating attributional style may help clinicians to identify patients who are at risk for experiencing a more severe course of depression. PMID:23561230

Novelty seeking, incentive salience and acquisition of cocaine self-administration in the rat

PubMed Central

Beckmann, Joshua S.; Marusich, Julie A.; Gipson, Cassandra D.; Bardo, Michael T.

2010-01-01

It has been suggested that incentive salience plays a major role in drug abuse and the development of addiction. Additionally, novelty seeking has been identified as a significant risk factor for drug abuse. However, how differences in the readiness to attribute incentive salience relate to novelty seeking and drug abuse vulnerability has not been explored. The present experiments examined how individual differences in incentive salience attribution relate to novelty seeking and acquisition of cocaine self-administration in a preclinical model. Rats were first assessed in an inescapable novelty task and a novelty place preference task (measures of novelty seeking), followed by a Pavlovian conditioned approach task for food (a measure of incentive salience attribution). Rats then were trained to self-administer cocaine (0.3 or 1.0 mg/kg/infusion) using an autoshaping procedure. The results demonstrate that animals that attributed incentive salience to a food-associated cue were higher novelty seekers and acquired cocaine self-administration more quickly at the lower dose. The results suggest that novelty-seeking behavior may be a mediator of incentive salience attribution and that incentive salience magnitude may be an indicator of drug reward. PMID:20655954

LabData database sub-systems for post-processing and quality control of stable isotope and gas chromatography measurements

NASA Astrophysics Data System (ADS)

Suckow, A. O.

2013-12-01

Measurements need post-processing to obtain results that are comparable between laboratories. Raw data may need to be corrected for blank, memory, drift (change of reference values with time), linearity (dependence of reference on signal height) and normalized to international reference materials. Post-processing parameters need to be stored for traceability of results. State of the art stable isotope correction schemes are available based on MS Excel (Geldern and Barth, 2012; Gröning, 2011) or MS Access (Coplen, 1998). These are specialized to stable isotope measurements only, often only to the post-processing of a special run. Embedding of algorithms into a multipurpose database system was missing. This is necessary to combine results of different tracers (3H, 3He, 2H, 18O, CFCs, SF6...) or geochronological tools (Sediment dating e.g. with 210Pb, 137Cs), to relate to attribute data (submitter, batch, project, geographical origin, depth in core, well information etc.) and for further interpretation tools (e.g. lumped parameter modelling). Database sub-systems to the LabData laboratory management system (Suckow and Dumke, 2001) are presented for stable isotopes and for gas chromatographic CFC and SF6 measurements. The sub-system for stable isotopes allows the following post-processing: 1. automated import from measurement software (Isodat, Picarro, LGR), 2. correction for sample-to sample memory, linearity, drift, and renormalization of the raw data. The sub-system for gas chromatography covers: 1. storage of all raw data 2. storage of peak integration parameters 3. correction for blank, efficiency and linearity The user interface allows interactive and graphical control of the post-processing and all corrections by export to and plot in MS Excel and is a valuable tool for quality control. The sub-databases are integrated into LabData, a multi-user client server architecture using MS SQL server as back-end and an MS Access front-end and installed in four laboratories to date. Attribute data storage (unique ID for each subsample, origin, project context etc.) and laboratory management features are included. Export routines to Excel (depth profiles, time series, all possible tracer-versus tracer plots...) and modelling capabilities are add-ons. The source code is public domain and available under the GNU general public licence agreement (GNU-GPL). References Coplen, T.B., 1998. A manual for a laboratory information management system (LIMS) for light stable isotopes. Version 7.0. USGS open file report 98-284. Geldern, R.v., Barth, J.A.C., 2012. Optimization of instrument setup and post-run corrections for oxygen and hydrogen stable isotope measurements of water by isotope ratio infrared spectroscopy (IRIS). Limnology and Oceanography: Methods 10, 1024-1036. Gröning, M., 2011. Improved water δ2H and δ18O calibration and calculation of measurement uncertainty using a simple software tool. Rapid Communications in Mass Spectrometry 25, 2711-2720. Suckow, A., Dumke, I., 2001. A database system for geochemical, isotope hydrological and geochronological laboratories. Radiocarbon 43, 325-337.

[The relationship between psychological factors and health care-seeking behavior in fibromyalgia patients].

PubMed

Güleç, Hüseyin; Sayar, Kemal; Yazici Güleç, Medine

2007-01-01

The aim of this study was to examine whether cognitive factors, such as attributions, expectations, and anger management style, contribute to the decision to seek medical care for fibromyalgia syndrome (FMS). We recruited 3 groups of subjects; patients from a FMS tertiary care setting, community residents with FMS who had not sought medical care for their FMS symptoms (nonpatients), and healthy controls. In all, 38 FMS nonpatients were compared to 37 FMS patients and 41 healthy controls on measures of anxiety, depression, anger, locus of control (LOC), attributions, pain intensity, and disability, as well as demographic characteristics. The prevalence of FMS non-patients was 2%. There was a significant difference between the 3 groups on the measures of anxiety, depression, LOC, and somatic and normalizing subscale scores of the symptom interpretation questionnaire (SIQ). FMS nonpatients, relative to FMS patients and healthy controls, were characterized by a significantly higher measure of both LOC and normalizing subscale score on the SIQ. There were no differences between the 2 FMS groups in demographical percentage and other psychometric measures. A hierarchical logistic regression model showed that the number of tender points, normalizing attribution style, and depression were independent predictors of help-seeking behavior. The rate of psychiatric and medical history is not related to the FMS syndrome. Expectations and a normalizing attribution style may contribute to help-seeking behavior for FMS.

[Burden of disease attributable to high- sodium diets in China, 2013].

PubMed

Liu, M; Li, Y C; Liu, S W; Wang, L J; Liu, Y N; Yin, P; Liu, J M; You, J L; Zhou, M G

2016-09-06

Objective: To examine the burden of disease(BOD)attributable to high-sodium diets in China in 2013. Methods: Data were extracted from the 2013 Global Burden of Disease Study for China to examine the BOD attributable to high-sodium diets in 2013, gender, and disease composition. Measurements for attributable BOD were population attributable fraction(PAF), deaths, standardized mortality and disability-adjusted life years(DALY)(not including Taiwan, China). An average world population age-structure for the period 2000-2025 was adopted to calculate age-standardized rates. Results: In 2013, deaths attributable to high-sodium diets accounted for 12.6% of all deaths and 14.5% of chronic disease deaths. Overall, 7.8% of deaths because of neoplasms, 25.2% of cardiovascular disease deaths, and 22.9% of chronic kidney disease deaths were attributable to high-sodium diets. A total of 1 176 553 deaths were attributable to high-sodium diets and the standardized mortality was 91.5/100 000, which was higher in men than in women(121.7/100 000 and 63.0/100 000, respectively). Overall, 22.759 million DALYs were attributable to high-sodium diets. The DALY standardized rate was 1 588.0/100 000, which was higher in men than in women(2 189.7/100 000 and 993.2/100 000, respectively). When compared by province, PAF in Xinjiang(25.0%), Qinghai(23.7%), Shanxi(23.2%), Tibet(22.1%)and Shandong(20.5%)was higher than other provinces. The standardized mortality in Xinjiang(239.4/100 000), Qinghai(238.9/100 000), Tibet(221.7/100 000), Shanxi(166.2/100 000)and Hebei(149.9/100 000)were higher than other provinces. The DALY standardized rate attributable to high-sodium diets was highest in Xinjiang(4 430.8/100 000), Qinghai(4 422.5/100 000), Tibet(4 021.4/100 000), Shanxi(2 816.6/100 000), and Hebei(2 624.9/100 000). Conclusion: The BOD attributable to high-sodium diets is a serious issue in China, particularly in men and in the northern provinces. Effective measures should be taken in northern provinces to reduce sodium intake.

Implementing GIS in real estate price prediction and mass valuation: the case study of Nicosia District

NASA Astrophysics Data System (ADS)

Yiorkas, Charalambos; Dimopoulos, Thomas

2017-09-01

When the European Commission, International Monetary Fund and European Central Bank arrived in Cyprus to assist for a sustainable solution on the crisis on the banking sector, one of the first things they ordered was a New General Valuation (a mass appraisal that would revalue all properties in Cyprus as on 1st of January 2013), that it would be used for taxation purposes. The above indicates the importance of property mass appraising tools. This task was successfully conducted by the Department of Lands and Surveys. Authors aim to move a step further and implement the use of GIS and GWR techniques to improve the results of the New General Valuation. On a sample of comparative evidences for flats in Nicosia District, GIS was used to measure the impact of spatial attributes on real estate prices and to construct a prediction model in terms of spatially estimating apartment values. In addition to the structural property characteristics, some spatial attributes (landmarks) were also analysed to assess their contribution on the prices of the apartments, including the Central Business District (CBD), schools and universities, as well as the major city roads and the restricted zone that divides the country into two parts; the occupied by Turkish area and the Greek area. The values of the spatial attributes, or locational characteristics, were determined by employing GIS, considering an established model of multicriteria analysis. The price prediction model was analysed using the OLS method and calibrated based on the GWR method. The results of the statistic process indicate an accuracy of 81.34%, showing better performance than the mass valuation system applied by the Department of Land and Surveys in Cyprus with accuracy of 66.76%. This approach suggests that GIS systems are fundamentally important in mass valuation procedures in order to identify the spatial pattern of the attributes, provided that the database is comprised by a sufficient number of comparable information and it is continuously updated.

Questionnaire for measuring organisational attributes in dental-care practices: psychometric properties and test-retest reliability.

PubMed

Goetz, Katja; Hasse, Philipp; Szecsenyi, Joachim; Campbell, Stephen M

2016-04-01

The consideration of organisational aspects, such as shared goals and clear communication, within the health care team is important to ensure good quality care. In primary health care, the instrument Survey of Organizational Attributes for Primary Care (SOAPC) is available to measure organisational attributes of care. However, there is no instrument available for dental care. The aim of the present study was to investigate psychometric properties and test-retest reliability of the version of SOAPC adapted for dental care, namely the Survey of Organizational Attributes in Dental Care (SOADC). The SOADC consists of 21 items in the following four subscales: communication; decision making; stress/chaos; and history of change. Convergent construct validity was measured using the job satisfaction scale. A total of 287 dental-care practices were asked to participate in the validation study. Psychometric properties and test-retest reliability were observed. A total of 43 dental-care practices responded to the survey. At baseline, 178 dental-care staff completed the questionnaire, and 4 weeks later 138 did so. Internal consistency, measured by Cronbach's alpha, was 0.718 or higher in the subscales. The test-retest reliability for each subscale and the overall SOADC score demonstrated good correlations over the 4-week test-retest interval, except for 'history of change'. A strong correlation with the aggregated job-satisfaction scale showed high convergent construct validity of SOADC. The consideration of organisational aspects from the perspective of dental-care teams is important for providing good quality of care. The SOADC is a reliable instrument with good psychometric properties and is suitable for the evaluation of organisational attributes in dental-care practices. © 2015 FDI World Dental Federation.

Cognitive Styles, Demographic Attributes, Task Performance and Affective Experiences: An Empirical Investigation into Astrophysics Data System (ADS) Core Users

NASA Astrophysics Data System (ADS)

Tong, Rong

As a primary digital library portal for astrophysics researchers, SAO/NASA ADS (Astrophysics Data System) 2.0 interface features several visualization tools such as Author Network and Metrics. This research study involves 20 ADS long term users who participated in a usability and eye tracking research session. Participants first completed a cognitive test, and then performed five tasks in ADS 2.0 where they explored its multiple visualization tools. Results show that over half of the participants were Imagers and half of the participants were Analytic. Cognitive styles were found to have significant impacts on several efficiency-based measures. Analytic-oriented participants were observed to spent shorter time on web pages and apps, made fewer web page changes than less-Analytic-driving participants in performing common tasks, whereas AI (Analytic-Imagery) participants also completed their five tasks faster than non-AI participants. Meanwhile, self-identified Imagery participants were found to be more efficient in their task completion through multiple measures including total time on task, number of mouse clicks, and number of query revisions made. Imagery scores were negatively associated with frequency of confusion and the observed counts of being surprised. Compared to those who did not claimed to be a visual person, self-identified Imagery participants were observed to have significantly less frequency in frustration and hesitation during their task performance. Both demographic variables and past user experiences were found to correlate with task performance; query revision also correlated with multiple time-based measurements. Considered as an indicator of efficiency, query revisions were found to correlate negatively with the rate of complete with ease, and positively with several time-based efficiency measures, rate of complete with some difficulty, and the frequency of frustration. These results provide rich insights into the cognitive styles of ADS' core users, the impact of such styles and demographic attributes on their task performance their affective and cognitive experiences, and their interaction behaviors while using the visualization component of ADS 2.0, and would subsequently contribute to the design of bibliographic retrieval systems for scientists.

The Self-Organized Archive: SPASE, PDS and Archive Cooperatives

NASA Astrophysics Data System (ADS)

King, T. A.; Hughes, J. S.; Roberts, D. A.; Walker, R. J.; Joy, S. P.

2005-05-01

Information systems with high quality metadata enable uses and services which often go beyond the original purpose. There are two types of metadata: annotations which are items that comment on or describe the content of a resource and identification attributes which describe the external properties of the resource itself. For example, annotations may indicate which columns are present in a table of data, whereas an identification attribute would indicate source of the table, such as the observatory, instrument, organization, and data type. When the identification attributes are collected and used as the basis of a search engine, a user can constrain on an attribute, the archive can then self-organize around the constraint, presenting the user with a particular view of the archive. In an archive cooperative where each participating data system or archive may have its own metadata standards, providing a multi-system search engine requires that individual archive metadata be mapped to a broad based standard. To explore how cooperative archives can form a larger self-organized archive we will show how the Space Physics Archive Search and Extract (SPASE) data model will allow different systems to create a cooperative and will use Planetary Data System (PDS) plus existing space physics activities as a demonstration.

Motor vehicle attributes : status report

DOT National Transportation Integrated Search

1985-03-01

The Transportation Systems Center (TSC) was requested by the National Highway : Traffic Safety Administration's (NHTSA) Office of Vehicle Research to compile : and computerize a data base of vehicle safety attributes for automobiles and : trucks. The...

19 CFR 146.96 - Approval of other recordkeeping systems.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Regulatory Audit: (1) An explanation of the method describing how attribution will be made when a finished...; (2) A mathematical example covering at least two months which shows the amounts attributed, all...

Baseflow physical characteristics differ at multiple spatial scales in stream networks across diverse biomes

Treesearch

Janine Ruegg; Walter K. Dodds; Melinda D. Daniels; Ken R. Sheehan; Christina L. Baker; William B. Bowden; Kaitlin J. Farrell; Michael B. Flinn; Tamara K. Harms; Jeremy B. Jones; Lauren E. Koenig; John S. Kominoski; William H. McDowell; Samuel P. Parker; Amy D. Rosemond; Matt T. Trentman; Matt Whiles; Wilfred M. Wollheim

2016-01-01

ContextSpatial scaling of ecological processes is facilitated by quantifying underlying habitat attributes. Physical and ecological patterns are often measured at disparate spatial scales limiting our ability to quantify ecological processes at broader spatial scales using physical attributes.

The Upside of Being Socially Anxious: Psychopathic Attributes and Social Anxiety are Negatively Associated

PubMed Central

Hofmann, Stefan G.; Korte, Kristina J.; Suvak, Michael K.

2009-01-01

Psychopathy is characterized by a lack of concern for other people and social norms. In contrast, individuals with high social anxiety are overly concerned about the approval of others and violating social norms. Therefore, we hypothesized that social anxiety is negatively associated with psychopathic attributes, with males being more psychopathic than females. In order to test this hypothesis, we administered self-report measures of social anxiety, psychopathic attributes, and academic misconduct as an index of adherence to social norms to a sample of 349 undergraduate college students (244 females and 105 males). Males had more psychopathic attributes than females. Social anxiety and psychopathic attributes showed a weak but significant negative correlation in the total sample and also in the subgroup of males and females. Psychopathic attributes were further positively associated with academic misconduct behaviors among females, but not among males. These findings are consistent with the notion that social anxiety and psychopathic attributes are negatively associated. PMID:19777142

Linking the Observation of Essential Variables to Societal Benefits

NASA Astrophysics Data System (ADS)

Sylak-Glassman, E.

2017-12-01

Different scientific communities have established sets of commonly agreed upon essential variables to help coordinate data collection in a variety of Earth observation areas. As an example, the World Meteorological Organization Global Climate Observing System has identified 50 Essential Climate Variables (ECVs), such as sea-surface temperature and carbon dioxide, which are required to monitoring the climate and detect and attribute climate change. In addition to supporting climate science, measuring these ECVs deliver many types of societal benefits, ranging from disaster mitigation to agricultural productivity to human health. While communicating the value in maintaining and improving observational records for these variables has been a challenge, quantifying how the measurement of these ECVs results in the delivery of many different societal benefits may help support their continued measurement. The 2016 National Earth Observation Assessment (EOA 2016) quantified the impact of individual Earth observation systems, sensors, networks, and surveys (or Earth observation systems, for short) on the achievement of 217 Federal objectives in 13 societal benefit areas (SBAs). This study will demonstrate the use of the EOA 2016 dataset to show the different Federal objectives and SBAs that are impacted by the Earth observation systems used to measure ECVs. Describing how the measurements from these Earth observation systems are used not only to maintain the climate record but also to meet additional Federal objectives may help articulate the continued measurement of the ECVs. This study will act as a pilot for the use of the EOA 2016 dataset to map between the measurements required to observe additional sets of variables, such as the Essential Ocean Variables and Essential Biodiversity Variables, and the ability to achieve a variety of societal benefits.

A Safe, Self-Calibrating, Wireless System for Measuring Volume of Any Fuel at Non-Horizontal Orientation

NASA Technical Reports Server (NTRS)

Woodward, Stanley E.; Taylor, Bryant D.

2010-01-01

A system for wirelessly measuring the volume of fluid in tanks at non-horizontal orientation is predicated upon two technologies developed at Langley Research Center. The first is a magnetic field response recorder that powers and interrogates magnetic field response sensors [ Magnetic Field Response Measurement Acquisition System, (LAR-16908), NASA Tech Briefs, Vol. 30, No. 6 (June 2006), page 28]. Magnetic field response sensors are a class of sensors that are powered via oscillating magnetic fields and when electrically active respond with their own magnetic fields whose attributes are dependent upon the magnitude of the physical quantity being measured. The response recorder facilitates the use of the second technology, which is a magnetic field response fluid-level sensor ["Wireless Fluid- Level Sensors for Harsh Environments," (LAR-17155), NASA Tech Briefs, Vol. 33, No. 4 (April 2009), page 30]. The method for powering and interrogating the sensors allows them to be completely encased in materials (Fig. 1) that are chemically resilient to the fluid being measured, thereby facilitating measurement of substances (e.g., acids, petroleum, cryogenic, caustic, and the like) that would normally destroy electronic circuitry. When the sensors are encapsulated, no fluid (or fluid vapor) is exposed to any electrical component of the measurement system. There is no direct electrical line from the vehicle or plant power into a fuel container. The means of interrogating and powering the sensors can be completely physically and electrically isolated from the fuel and vapors by placing the sensor on the other side of an electrically non-conductive bulkhead (Fig. 2). These features prevent the interrogation system and its electrical components from becoming an ignition source.

Service-Oriented Architecture Approach to MAGTF Logistics Support Systems

DTIC Science & Technology

2013-09-01

Support System-Marine Corps IT Information Technology KPI Key Performance Indicators LCE Logistics Command Element ITV In-transit Visibility LCM...building blocks, options, KPI (key performance indicators), design decisions and the corresponding; the physical attributes which is the second attribute... KPI ) that they impact. h. Layer 8 (Information Architecture) The business intelligence layer and information architecture safeguards the inclusion

Characterization of Chinese rice wine taste attributes using liquid chromatographic analysis, sensory evaluation, and an electronic tongue.

PubMed

Yu, HaiYan; Zhao, Jie; Li, Fenghua; Tian, Huaixiang; Ma, Xia

2015-08-01

To evaluate the taste characteristics of Chinese rice wine, wine samples sourced from different vintage years were analyzed using liquid chromatographic analysis, sensory evaluation, and an electronic tongue. Six organic acids and seventeen amino acids were measured using high performance liquid chromatography (HPLC). Five monosaccharides were measured using anion-exchange chromatography. The global taste attributes were analyzed using an electronic tongue (E-tongue). The correlations between the 28 taste-active compounds and the sensory attributes, and the correlations between the E-tongue response and the sensory attributes were established via partial least square discriminant analysis (PLSDA). E-tongue response data combined with linear discriminant analysis (LDA) were used to discriminate the Chinese rice wine samples sourced from different vintage years. Sensory evaluation indicated significant differences in the Chinese rice wine samples sourced from 2003, 2005, 2008, and 2010 vintage years in the sensory attributes of harmony and mellow. The PLSDA model for the taste-active compounds and the sensory attributes showed that proline, fucose, arabinose, lactic acid, glutamic acid, arginine, isoleucine, valine, threonine, and lysine had an influence on the taste characteristic of Chinese rice wine. The Chinese rice wine samples were all correctly classified using the E-tongue and LDA. The electronic tongue was an effective tool for rapid discrimination of Chinese rice wine. Copyright © 2015 Elsevier B.V. All rights reserved.