A new data integration approach for AutoCAD and GIS

NASA Astrophysics Data System (ADS)

Ye, Hongmei; Li, Yuhong; Wang, Cheng; Li, Lijun

2006-10-01

GIS has its advantages both on spatial data analysis and management, particularly on the geometric and attributive information management, which has also attracted lots attentions among researchers around world. AutoCAD plays more and more important roles as one of the main data sources of GIS. Various work and achievements can be found in the related literature. However, the conventional data integration from AutoCAD to GIS is time-consuming, which also can cause the information loss both in the geometric aspects and the attributive aspects for a large system. It is necessary and urgent to sort out new approach and algorithm for the efficient high-quality data integration. In this paper, a novel data integration approach from AutoCAD to GIS will be introduced based on the spatial data mining technique through the data structure analysis both in the AutoCAD and GIS. A practicable algorithm for the data conversion from CAD to GIS will be given as well. By a designed evaluation scheme, the accuracy of the conversion both in the geometric and the attributive information will be demonstrated. Finally, the validity and feasibility of the new approach will be shown by an experimental analysis.

Rethinking Design Process: Using 3D Digital Models as an Interface in Collaborative Session

ERIC Educational Resources Information Center

Ding, Suining

2008-01-01

This paper describes a pilot study for an alternative design process by integrating a designer-user collaborative session with digital models. The collaborative session took place in a 3D AutoCAD class for a real world project. The 3D models served as an interface for designer-user collaboration during the design process. Students not only learned…

Reliability and validity of the AutoCAD software method in lumbar lordosis measurement

PubMed Central

Letafatkar, Amir; Amirsasan, Ramin; Abdolvahabi, Zahra; Hadadnezhad, Malihe

2011-01-01

Objective The aim of this study was to determine the reliability and validity of the AutoCAD software method in lumbar lordosis measurement. Methods Fifty healthy volunteers with a mean age of 23 ± 1.80 years were enrolled. A lumbar lateral radiograph was taken on all participants, and the lordosis was measured according to the Cobb method. Afterward, the lumbar lordosis degree was measured via AutoCAD software and flexible ruler methods. The current study is accomplished in 2 parts: intratester and intertester evaluations of reliability as well as the validity of the flexible ruler and software methods. Results Based on the intraclass correlation coefficient, AutoCAD's reliability and validity in measuring lumbar lordosis were 0.984 and 0.962, respectively. Conclusions AutoCAD showed to be a reliable and valid method to measure lordosis. It is suggested that this method may replace those that are costly and involve health risks, such as radiography, in evaluating lumbar lordosis. PMID:22654681

Reliability and validity of the AutoCAD software method in lumbar lordosis measurement.

PubMed

Letafatkar, Amir; Amirsasan, Ramin; Abdolvahabi, Zahra; Hadadnezhad, Malihe

2011-12-01

The aim of this study was to determine the reliability and validity of the AutoCAD software method in lumbar lordosis measurement. Fifty healthy volunteers with a mean age of 23 ± 1.80 years were enrolled. A lumbar lateral radiograph was taken on all participants, and the lordosis was measured according to the Cobb method. Afterward, the lumbar lordosis degree was measured via AutoCAD software and flexible ruler methods. The current study is accomplished in 2 parts: intratester and intertester evaluations of reliability as well as the validity of the flexible ruler and software methods. Based on the intraclass correlation coefficient, AutoCAD's reliability and validity in measuring lumbar lordosis were 0.984 and 0.962, respectively. AutoCAD showed to be a reliable and valid method to measure lordosis. It is suggested that this method may replace those that are costly and involve health risks, such as radiography, in evaluating lumbar lordosis.

Research on AutoCAD secondary development and function expansion based on VBA technology

NASA Astrophysics Data System (ADS)

Zhang, Runmei; Gu, Yehuan

2017-06-01

AutoCAD is the most widely used drawing tool among the similar design drawing products. In the process of drawing different types of design drawings of the same product, there are a lot of repetitive and single work contents. The traditional manual method uses a drawing software AutoCAD drawing graphics with low efficiency, high error rate and high input cost shortcomings and many more. In order to solve these problems, the design of the parametric drawing system of the hot-rolled I-beam (steel beam) cross-section is completed by using the VBA secondary development tool and the Access database software with large-capacity storage data, and the analysis of the functional extension of the plane drawing and the parametric drawing design in this paper. For the secondary development of AutoCAD functions, the system drawing work will be simplified and work efficiency also has been greatly improved. This introduction of parametric design of AutoCAD drawing system to promote the industrial mass production and related industries economic growth rate similar to the standard I-beam hot-rolled products.

Development of student's skills of 3D modeling of assembly units

NASA Astrophysics Data System (ADS)

Chepur, P. V.; Boshhenko, T. V.

2018-03-01

The paper presents data on the influence of additives of the pre-treated aluminium oxide powder on the structure of cast lead-tin-based bronzes. The article demonstrates that modern, advanced from the point of view of automation, methods in designing products are the basis for the successful implementation of any production task. The advantages of product presentation in the form of an assembly consisting of 3D models of its details are described. The extreme importance of high-quality preparation of students of engineering specialties for work in computer-aided design programs such as AutoCAD, Compass 3D, Inventer|, Solid Edge, Solid Works, Revit, ANSYS is considered. It is established that one of the most effective forms of increasing the level of computer graphic preparation of students are academic competitions and contests on modeling and prototyping products. The stages of creation of assembly unit models in the AutoCad and Compass 3D software suits generally accepted both in design in a business environment and during training of specialists are considered. The developed 3D models of assembly units are presented in the course of preparation for academic competitions (called Academic Olympics in Russia) of students of the 2nd-5th years of study and the first year students of the master's program in engineering. The conclusions and recommendations on the development of the direction of three-dimensional design in the environment of higher education are given.

Sandia MEMS Visualization Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor; Jorgensen, Craig R.; Young, Andrew I.

This is a revision to the Sandia MEMS Visualization Tools. It replaces all previous versions. New features in this version: Support for AutoCAD 2014 and 2015 . This CD contains an integrated set of electronic files that: a) Provides a 2D Process Visualizer that generates cross-section images of devices constructed using the SUMMiT V fabrication process. b) Provides a 3D Visualizer that generates 3D images of devices constructed using the SUMMiT V fabrication process. c) Provides a MEMS 3D Model generator that creates 3D solid models of devices constructed using the SUMMiT V fabrication process. While there exists some filesmore » on the CD that are used in conjunction with software package AutoCAD , these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

3D Model Generation From the Engineering Drawing

NASA Astrophysics Data System (ADS)

Vaský, Jozef; Eliáš, Michal; Bezák, Pavol; Červeňanská, Zuzana; Izakovič, Ladislav

2010-01-01

The contribution deals with the transformation of engineering drawings in a paper form into a 3D computer representation. A 3D computer model can be further processed in CAD/CAM system, it can be modified, archived, and a technical drawing can be then generated from it as well. The transformation process from paper form to the data one is a complex and difficult one, particularly owing to the different types of drawings, forms of displayed objects and encountered errors and deviations from technical standards. The algorithm for 3D model generating from an orthogonal vector input representing a simplified technical drawing of the rotational part is described in this contribution. The algorithm was experimentally implemented as ObjectARX application in the AutoCAD system and the test sample as the representation of the rotational part was used for verificaton.

48 CFR 3.807 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Civil penalties. 3.807... Federal Transactions 3.807 Civil penalties. Agencies shall impose and collect civil penalties pursuant to the provisions of the Program Fraud and Civil Remedies Act, 31 U.S.C. 3803 (except subsection (c...

48 CFR 3.807 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Civil penalties. 3.807... Federal Transactions 3.807 Civil penalties. Agencies shall impose and collect civil penalties pursuant to the provisions of the Program Fraud and Civil Remedies Act, 31 U.S.C. 3803 (except subsection (c...

48 CFR 3.807 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Civil penalties. 3.807... Federal Transactions 3.807 Civil penalties. Agencies shall impose and collect civil penalties pursuant to the provisions of the Program Fraud and Civil Remedies Act, 31 U.S.C. 3803 (except subsection (c...

48 CFR 3.807 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Civil penalties. 3.807... Federal Transactions 3.807 Civil penalties. Agencies shall impose and collect civil penalties pursuant to the provisions of the Program Fraud and Civil Remedies Act, 31 U.S.C. 3803 (except subsection (c...

48 CFR 3.807 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Civil penalties. 3.807... Federal Transactions 3.807 Civil penalties. Agencies shall impose and collect civil penalties pursuant to the provisions of the Program Fraud and Civil Remedies Act, 31 U.S.C. 3803 (except subsection (c...

[Quantitative analysis of the corneal subbasal nerves in different degrees of dry eye with AutoCAD].

PubMed

Cheng, Y; Wu, J; Zhu, H F; Cheng, Y; Zhu, X P

2016-03-01

To evaluate the practical value of AutoCAD in quantitative analysis of corneal subbasal epithelial nerves with different degrees of dry eye. Ninety patients were divided into groups of mild, moderate, and severe dry eye, 30 patients (60 eyes) in each group. And 30 healthy volunteers were recruited as the normal control group. Confocal microscopy was used to observe the length of the subbasal epithelial nerve plexus. The images were analyzed by AutoCAD software to determine the density (mm/mm(2)), the number of branches, and the curvature score of the subbasal epithelial nerves. These data of patients with dry eye and the controls were statistically compared, by analysis of variance(ANOV). By AutoCAD software, quantitative analysis of the corneal subbasal epithelial nerves was successfully performed. The nerve density in the patients with mild dry eye[(16.70±3.43) mm/mm(2)] was not significantly different from the controls[(15.87 ± 2.75) mm/mm(2)] (P=0.880), but the number of nerval branches 13.43±2.46 and the curvature 3.10±0.80 increased significantly (P<0.001). The nerve density in the patients with moderate and severe dry eye was significantly different from that in the normal control group (F=114.739, P<0.001). The neural density was significantly lower in the patients with severe dry eye than the controls, but there was no significant difference in the curvature scores between the two groups (P= 0.557). AutoCAD software is useful in the quantitative analysis of corneal nerve images under a confocal microscope. The corneal subbasal epithelial nerve density, the number of branches, and the curvature of the nerves are related to the degree of dry eye, and may be used as clinical indicators.

7 CFR 3555.3 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Civil rights. 3555.3 Section 3555.3 Agriculture... GUARANTEED RURAL HOUSING PROGRAM (Eff. 9-1-14) General § 3555.3 Civil rights. Rural Development, lenders, and.... Rural Development's civil rights compliance requirements are provided in 7 CFR part 1901, subpart E. ...

A comparison of profilometer and AutoCAD software techniques in evaluation of implant angulation in vitro.

PubMed

Assunção, Wirley Gonçalves; Gomes, Erica Alves; Tabata, Lucas Fernando; Gennari-Filho, Humberto

2008-01-01

The aim of this study was to compare 2 different methods of assessment of implants at different inclinations (90 degrees and 65 degrees)--with a profilometer and AutoCAD software. Impressions (n = 5) of a metal matrix containing 2 implants, 1 at 90 degrees to the surface and 1 at 65 degrees to the surface, were obtained with square impression copings joined together with dental floss splinting covered with autopolymerizing acrylic resin, an open custom tray, and vinyl polysiloxane impression material. Measurement of the angles (in degrees) of the implant analogs were assessed by the same blinded operator with a profilometer and through analysis of digitized images by AutoCAD software. For each implant analog, 3 readings were performed with each method. The results were subjected to a nonparametric Kruskal-Wallis test, with P < or = .05 considered significant. For implants perpendicular to the horizontal surface of the specimen (90 degrees), there were no significant differences between the mean measurements obtained with the profilometer (90.04 degrees) and AutoCAD (89.95 degrees; P = .9142). In the analyses of the angled implants at 65 degrees in relation to the horizontal surface of the specimen, significant differences were observed (P = .0472) between the mean readings with the profilometer (65.73 degrees) and AutoCAD (66.25 degrees). The degrees of accuracy of implant angulation recording vary among the techniques available and may vary depending on the angle of the implant. Further investigation is needed to determine the best test conditions and the best measuring technique for determination of the angle of the implant in vitro.

7 CFR 3550.3 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 15 2012-01-01 2012-01-01 false Civil rights. 3550.3 Section 3550.3 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS General § 3550.3 Civil rights. RHS will administer its... amended by Executive Order 12259, as applicable. The civil rights compliance requirements for RHS are in 7...

7 CFR 3550.3 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Civil rights. 3550.3 Section 3550.3 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS General § 3550.3 Civil rights. RHS will administer its... amended by Executive Order 12259, as applicable. The civil rights compliance requirements for RHS are in 7...

7 CFR 3550.3 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Civil rights. 3550.3 Section 3550.3 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS General § 3550.3 Civil rights. RHS will administer its... amended by Executive Order 12259, as applicable. The civil rights compliance requirements for RHS are in 7...

7 CFR 3550.3 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Civil rights. 3550.3 Section 3550.3 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS General § 3550.3 Civil rights. RHS will administer its... amended by Executive Order 12259, as applicable. The civil rights compliance requirements for RHS are in 7...

7 CFR 3550.3 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Civil rights. 3550.3 Section 3550.3 Agriculture... DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS General § 3550.3 Civil rights. RHS will administer its... amended by Executive Order 12259, as applicable. The civil rights compliance requirements for RHS are in 7...

A voxel visualization and analysis system based on AutoCAD

NASA Astrophysics Data System (ADS)

Marschallinger, Robert

1996-05-01

A collection of AutoLISP programs is presented which enable the visualization and analysis of voxel models by AutoCAD rel. 12/rel. 13. The programs serve as an interactive, graphical front end for manipulating the results of three-dimensional modeling software producing block estimation data. ASCII data files describing geometry and attributes per estimation block are imported and stored as a voxel array. Each voxel may contain multiple attributes, therefore different parameters may be incorporated in one voxel array. Voxel classification is implemented on a layer basis providing flexible treatment of voxel classes such as recoloring, peeling, or volumetry. A versatile clipping tool enables slicing voxel arrays according to combinations of three perpendicular clipping planes. The programs feature an up-to-date, graphical user interface for user-friendly operation by non AutoCAD specialists.

User productivity as a function of AutoCAD interface design.

PubMed

Mitta, D A; Flores, P L

1995-12-01

Increased operator productivity is a desired outcome of user-CAD interaction scenarios. Two objectives of this research were to (1) define a measure of operator productivity and (2) empirically investigate the potential effects of CAD interface design on operator productivity, where productivity is defined as the percentage of a drawing session correctly completed per unit time. Here, AutoCAD provides the CAD environment of interest. Productivity with respect to two AutoCAD interface designs (menu, template) and three task types (draw, dimension, display) was investigated. Analysis of user productivity data revealed significantly higher productivity under the menu interface condition than under the template interface condition. A significant effect of task type was also discovered, where user productivity under display tasks was higher than productivity under the draw and dimension tasks. Implications of these results are presented.

Correlation between a Student's Performance on the Mental Cutting Test and Their 3D Parametric Modeling Ability

ERIC Educational Resources Information Center

Steinhauer, H. M.

2012-01-01

Engineering graphics has historically been viewed as a challenging course to teach as students struggle to grasp and understand the fundamental concepts and then to master their proper application. The emergence of stable, fast, affordable 3D parametric modeling platforms such as CATIA, Pro-E, and AutoCAD while providing several pedagogical…

The application of a 3D laser scanner in contemporary education of civil engineering students

NASA Astrophysics Data System (ADS)

Szafranko, E.; Pawłowicz, J. A.

2017-10-01

The programs of study in field of civil engineering include a number of objects, which concern with details of the planning, design and realization of buildings. These are buildings and structures such as, roads, bridges, tunnels, viaducts. Most of these objects are located far from university and it was difficult to show them on the lessons. Discussing the structure based on the description of the object, photographs or drawings do not always allow to imagine the actual shapes and sizes of buildings, roads, bridges and viaducts. In such a situation, terrestrial photogrammetric technology could be helpful. One of them is 3D laser scanning technology Measurements performed with a laser scanner allows to introduce selected objects in the form of spatial models. They give you the ability to rotate and zoom them in order to know the details of construction of the object. The article presents the possibility of using a 3D laser scanner in teaching.

12 CFR 1250.3 - Civil money penalties.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Civil money penalties. 1250.3 Section 1250.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES FLOOD INSURANCE § 1250.3 Civil money... to § 1250.2, the Director of FHFA, or his or her designee, may assess civil money penalties against...

12 CFR 1250.3 - Civil money penalties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Civil money penalties. 1250.3 Section 1250.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES FLOOD INSURANCE § 1250.3 Civil money... to § 1250.2, the Director of FHFA, or his or her designee, may assess civil money penalties against...

7 CFR 15d.3 - Compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Compliance. 15d.3 Section 15d.3 Agriculture Office of the Secretary of Agriculture NONDISCRIMINATION IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE UNITED STATES DEPARTMENT OF AGRICULTURE § 15d.3 Compliance. The Director of the Office of Civil Rights shall...

7 CFR 15d.3 - Compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 1 2011-01-01 2011-01-01 false Compliance. 15d.3 Section 15d.3 Agriculture Office of the Secretary of Agriculture NONDISCRIMINATION IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE UNITED STATES DEPARTMENT OF AGRICULTURE § 15d.3 Compliance. The Director of the Office of Civil Rights shall...

28 CFR 76.3 - Basis for civil penalty.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Basis for civil penalty. 76.3 Section 76... CIVIL PENALTIES FOR POSSESSION OF CERTAIN CONTROLLED SUBSTANCES § 76.3 Basis for civil penalty. (a) Any....C. 844a shall be liable to the United States for a civil penalty in an amount of not to exceed $10...

28 CFR 76.3 - Basis for civil penalty.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Basis for civil penalty. 76.3 Section 76... CIVIL PENALTIES FOR POSSESSION OF CERTAIN CONTROLLED SUBSTANCES § 76.3 Basis for civil penalty. (a) Any....C. 844a shall be liable to the United States for a civil penalty in an amount of not to exceed $10...

Method of development of the program of forming of parametrical drawings of details in the AutoCAD software product

NASA Astrophysics Data System (ADS)

Alshakova, E. L.

2017-01-01

The program in the AutoLISP language allows automatically to form parametrical drawings during the work in the AutoCAD software product. Students study development of programs on AutoLISP language with the use of the methodical complex containing methodical instructions in which real examples of creation of images and drawings are realized. Methodical instructions contain reference information necessary for the performance of the offered tasks. The method of step-by-step development of the program is the basis for training in programming on AutoLISP language: the program draws elements of the drawing of a detail by means of definitely created function which values of arguments register in that sequence in which AutoCAD gives out inquiries when performing the corresponding command in the editor. The process of the program design is reduced to the process of step-by-step formation of functions and sequence of their calls. The author considers the development of the AutoLISP program for the creation of parametrical drawings of details, the defined design, the user enters the dimensions of elements of details. These programs generate variants of tasks of the graphic works performed in educational process of "Engineering graphics", "Engineering and computer graphics" disciplines. Individual tasks allow to develop at students skills of independent work in reading and creation of drawings, as well as 3D modeling.

SEX DIFFERENCES IN DIGIT RATIO (2D:4D) AMONG MILITARY AND CIVIL COHORTS AT A MILITARY ACADEMY IN WROCŁAW, POLAND.

PubMed

Kociuba, Marek; Kozieł, Slawomir; Chakraborty, Raja

2016-09-01

The ratio of second-to-fourth digit length (2D:4D), which is generally higher in women compared with men, is a putative marker of prenatal testosterone (PT) exposure. Lower 2D:4D is linked with greater physical ability and strength, better sporting performance and a propensity towards jobs demanding greater physical ability. The objectives of this paper were to examine the sexual dimorphism in 2D:4D in both hands 1and compare this dimorphism in the students of military and civil courses at the General Kuściuszko Military Academy of Land Forces in Wrocław. The cross-sectional study compared 59 female and 118 male students from the military courses and 53 females and 64 male students from the civil courses. Besides calculating 2D:4D (2D/4D) for each hand, height and weight were also recorded. Physical fitness and endurance were assessed using Eurofit tests. Handgrip strength was measured using a standardized isometric dynamometer. In almost all physical tests, students in the military cohort showed highly significant greater physical ability and strength (e.g. handgrip strength) when compared with the civil cohort. Male participants had a significantly lower 2D:4D than females for each hand, as well as for the average value for both hands. The sexual dimorphism was, however, a little more pronounced in the right hand than in the left. Both sex and course type were significant predictors of 2D:4D. There were significant interactions between sex and the student type. Among females, but not in males, the military cohort had a significantly lower, i.e. more 'masculine', 2D:4D for the left hand and right hand and average for both hands (t=3.290, p<0.001) than the civil cohort. This was not the case in males. However, the sex difference in 2D:4D was only significant among the civil students, and not among the military cadets. In conclusion, higher PT exposure, as represented by a lower 2D:4D, among the Polish females might be an indicator of relatively increased physical

12 CFR 1250.3 - Civil money penalties.

Code of Federal Regulations, 2011 CFR

2011-01-01

... paid into the National Flood Mitigation Fund in accordance with section 1367 of the National Flood... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Civil money penalties. 1250.3 Section 1250.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES FLOOD INSURANCE § 1250.3 Civil money...

12 CFR 1250.3 - Civil money penalties.

Code of Federal Regulations, 2012 CFR

2012-01-01

... paid into the National Flood Mitigation Fund in accordance with section 1367 of the National Flood... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Civil money penalties. 1250.3 Section 1250.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES FLOOD INSURANCE § 1250.3 Civil money...

12 CFR 1250.3 - Civil money penalties.

Code of Federal Regulations, 2014 CFR

2014-01-01

... paid into the National Flood Mitigation Fund in accordance with section 1367 of the National Flood... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Civil money penalties. 1250.3 Section 1250.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES FLOOD INSURANCE § 1250.3 Civil money...

43 CFR 3190.3 - Sharing of civil penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Sharing of civil penalties. 3190.3 Section... Contracts for Oil and Gas Inspections: General § 3190.3 Sharing of civil penalties. Fifty percent of any civil penalty collected by the United States as a result of activities carried out by a State under a...

32 CFR 269.3 - Civil monetary penalty inflation adjustment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Civil monetary penalty inflation adjustment. 269.3 Section 269.3 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 269.3 Civil monetary...

Grammar-based Automatic 3D Model Reconstruction from Terrestrial Laser Scanning Data

NASA Astrophysics Data System (ADS)

Yu, Q.; Helmholz, P.; Belton, D.; West, G.

2014-04-01

The automatic reconstruction of 3D buildings has been an important research topic during the last years. In this paper, a novel method is proposed to automatically reconstruct the 3D building models from segmented data based on pre-defined formal grammar and rules. Such segmented data can be extracted e.g. from terrestrial or mobile laser scanning devices. Two steps are considered in detail. The first step is to transform the segmented data into 3D shapes, for instance using the DXF (Drawing Exchange Format) format which is a CAD data file format used for data interchange between AutoCAD and other program. Second, we develop a formal grammar to describe the building model structure and integrate the pre-defined grammars into the reconstruction process. Depending on the different segmented data, the selected grammar and rules are applied to drive the reconstruction process in an automatic manner. Compared with other existing approaches, our proposed method allows the model reconstruction directly from 3D shapes and takes the whole building into account.

46 CFR 506.3 - Civil monetary penalty inflation adjustment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Civil monetary penalty inflation adjustment. 506.3... PENALTY INFLATION ADJUSTMENT § 506.3 Civil monetary penalty inflation adjustment. The Commission shall... each civil monetary penalty provided by law within the jurisdiction of the Commission by the inflation...

[The Autocad system for planimetric study of the optic disc in glaucoma: technique and reproducibility study].

PubMed

Sánchez Pérez, A; Honrubia López, F M; Larrosa Poves, J M; Polo Llorens, V; Melcon Sánchez-Frieras, B

2001-09-01

To develop a lens planimetry technique for the optic disc using AutoCAD. To determine variability magnitude of the optic disc morphological measurements. We employed AutoCAD R.14.0 Autodesk: image acquisition, contour delimitation by multiple lines fitting or ellipse adjustment, image sectorialization and measurements quantification (optic disc and excavation, vertical diameters, optic disc area, excavation area, neuroretinal sector area and Beta atrophy area). Intraimage or operator and interimage o total reproducibility was studied by coefficient of variability (CV) (n=10) in normal and myopic optic discs. This technique allows to obtain optic disc measurement in 5 to 10 minutes time. Total or interimage variability of measurements introduced by one observer presents CV range from 1.18-4.42. Operator or intraimage measurement presents CV range from 0.30-4.21. Optic disc contour delimitation by ellipse adjustment achieved better reproducibility results than multiple lines adjustment in all measurements. Computer assisted AutoCAD planimetry is an interactive method to analyse the optic disc, feasible to incorporate to clinical practice. Reproducibility results are comparable to other analyzers in quantification optic disc morphology. Ellipse adjustment improves results in optic disc contours delimitation.

45 CFR 79.3 - Basis for civil penalties and assessments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Basis for civil penalties and assessments. 79.3 Section 79.3 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.3 Basis for civil penalties and assessments. (a) Claims. (1) Except as provided in...

6 CFR 13.3 - Basis for civil penalties and assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Basis for civil penalties and assessments. 13.3 Section 13.3 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.3 Basis for civil penalties and assessments. (a) Claims. (1) Except as provided in...

10 CFR 13.3 - Basis for civil penalties and assessments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Basis for civil penalties and assessments. 13.3 Section 13.3 Energy NUCLEAR REGULATORY COMMISSION PROGRAM FRAUD CIVIL REMEDIES § 13.3 Basis for civil penalties and assessments. (a) Claims. (1) Any person who makes a claim that the person knows or has reason to...

42 CFR 3.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Amount of a civil money penalty. 3.404 Section 3... money penalty. (a) The amount of a civil money penalty will be determined in accordance with paragraph (b) of this section and § 3.408 of this subpart. (b) The Secretary may impose a civil money penalty...

42 CFR 3.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Amount of a civil money penalty. 3.404 Section 3... money penalty. (a) The amount of a civil money penalty will be determined in accordance with paragraph (b) of this section and § 3.408 of this subpart. (b) The Secretary may impose a civil money penalty...

42 CFR 3.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Amount of a civil money penalty. 3.404 Section 3... money penalty. (a) The amount of a civil money penalty will be determined in accordance with paragraph (b) of this section and § 3.408 of this subpart. (b) The Secretary may impose a civil money penalty...

42 CFR 3.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Amount of a civil money penalty. 3.404 Section 3... money penalty. (a) The amount of a civil money penalty will be determined in accordance with paragraph (b) of this section and § 3.408 of this subpart. (b) The Secretary may impose a civil money penalty...

3D Modeling as Method for Construction and Analysis of Graphic Objects

NASA Astrophysics Data System (ADS)

Kheyfets, A. L.; Vasilieva, V. N.

2017-11-01

The use of 3D modeling when constructing and analyzing perspective projections and shadows is considered. The creation of photorealistic image is shown. The perspective of the construction project and characterization of its image are given as an example. The authors consider the construction of a dynamic block as a means of graphical information storage and automation of geometric constructions. The example of the dynamic block construction at creating a truss node is demonstrated. The constructions are considered as applied to the Auto-CAD software. The paper is aimed at improving the graphic methods of architectural design and improving the educational process when training the Bachelor’s degree students majoring in construction.

Interior Reconstruction Using the 3d Hough Transform

NASA Astrophysics Data System (ADS)

Dumitru, R.-C.; Borrmann, D.; Nüchter, A.

2013-02-01

Laser scanners are often used to create accurate 3D models of buildings for civil engineering purposes, but the process of manually vectorizing a 3D point cloud is time consuming and error-prone (Adan and Huber, 2011). Therefore, the need to characterize and quantify complex environments in an automatic fashion arises, posing challenges for data analysis. This paper presents a system for 3D modeling by detecting planes in 3D point clouds, based on which the scene is reconstructed at a high architectural level through removing automatically clutter and foreground data. The implemented software detects openings, such as windows and doors and completes the 3D model by inpainting.

Research on 3D virtual campus scene modeling based on 3ds Max and VRML

NASA Astrophysics Data System (ADS)

Kang, Chuanli; Zhou, Yanliu; Liang, Xianyue

2015-12-01

With the rapid development of modem technology, the digital information management and the virtual reality simulation technology has become a research hotspot. Virtual campus 3D model can not only express the real world objects of natural, real and vivid, and can expand the campus of the reality of time and space dimension, the combination of school environment and information. This paper mainly uses 3ds Max technology to create three-dimensional model of building and on campus buildings, special land etc. And then, the dynamic interactive function is realized by programming the object model in 3ds Max by VRML .This research focus on virtual campus scene modeling technology and VRML Scene Design, and the scene design process in a variety of real-time processing technology optimization strategy. This paper guarantees texture map image quality and improve the running speed of image texture mapping. According to the features and architecture of Guilin University of Technology, 3ds Max, AutoCAD and VRML were used to model the different objects of the virtual campus. Finally, the result of virtual campus scene is summarized.

42 CFR 3.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Amount of a civil money penalty. 3.404 Section 3.404 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Enforcement Program § 3.404 Amount of a civil...

Collaborative Multi-Scale 3d City and Infrastructure Modeling and Simulation

NASA Astrophysics Data System (ADS)

Breunig, M.; Borrmann, A.; Rank, E.; Hinz, S.; Kolbe, T.; Schilcher, M.; Mundani, R.-P.; Jubierre, J. R.; Flurl, M.; Thomsen, A.; Donaubauer, A.; Ji, Y.; Urban, S.; Laun, S.; Vilgertshofer, S.; Willenborg, B.; Menninghaus, M.; Steuer, H.; Wursthorn, S.; Leitloff, J.; Al-Doori, M.; Mazroobsemnani, N.

2017-09-01

Computer-aided collaborative and multi-scale 3D planning are challenges for complex railway and subway track infrastructure projects in the built environment. Many legal, economic, environmental, and structural requirements have to be taken into account. The stringent use of 3D models in the different phases of the planning process facilitates communication and collaboration between the stake holders such as civil engineers, geological engineers, and decision makers. This paper presents concepts, developments, and experiences gained by an interdisciplinary research group coming from civil engineering informatics and geo-informatics banding together skills of both, the Building Information Modeling and the 3D GIS world. New approaches including the development of a collaborative platform and 3D multi-scale modelling are proposed for collaborative planning and simulation to improve the digital 3D planning of subway tracks and other infrastructures. Experiences during this research and lessons learned are presented as well as an outlook on future research focusing on Building Information Modeling and 3D GIS applications for cities of the future.

3D printed auto-mixing chip enables rapid smartphone diagnosis of anemia

PubMed Central

Plevniak, Kimberly; Campbell, Matthew; Hodges, Abby; He, Mei

2016-01-01

Clinical diagnosis requiring central facilities and site visits can be burdensome for patients in resource-limited or rural areas. Therefore, development of a low-cost test that utilizes smartphone data collection and transmission would beneficially enable disease self-management and point-of-care (POC) diagnosis. In this paper, we introduce a low-cost iPOC3D diagnostic strategy which integrates 3D design and printing of microfluidic POC device with smartphone-based disease diagnosis in one process as a stand-alone system, offering strong adaptability for establishing diagnostic capacity in resource-limited areas and low-income countries. We employ smartphone output (AutoCAD 360 app) and readout (color-scale analytical app written in-house) functionalities for rapid 3D printing of microfluidic auto-mixers and colorimetric detection of blood hemoglobin levels. The auto-mixing of reagents with blood via capillary force has been demonstrated in 1 second without the requirement of external pumps. We employed this iPOC3D system for point-of-care diagnosis of anemia using a training set of patients (nanemia = 16 and nhealthy = 6), which showed consistent measurements of blood hemoglobin levels (a.u.c. = 0.97) and comparable diagnostic sensitivity and specificity, compared with standard clinical hematology analyzer. Capable of 3D fabrication flexibility and smartphone compatibility, this work presents a novel diagnostic strategy for advancing personalized medicine and mobile healthcare. PMID:27733894

3D printed auto-mixing chip enables rapid smartphone diagnosis of anemia.

PubMed

Plevniak, Kimberly; Campbell, Matthew; Myers, Timothy; Hodges, Abby; He, Mei

2016-09-01

Clinical diagnosis requiring central facilities and site visits can be burdensome for patients in resource-limited or rural areas. Therefore, development of a low-cost test that utilizes smartphone data collection and transmission would beneficially enable disease self-management and point-of-care (POC) diagnosis. In this paper, we introduce a low-cost i POC 3D diagnostic strategy which integrates 3D design and printing of microfluidic POC device with smartphone-based disease diagnosis in one process as a stand-alone system, offering strong adaptability for establishing diagnostic capacity in resource-limited areas and low-income countries. We employ smartphone output (AutoCAD 360 app) and readout (color-scale analytical app written in-house) functionalities for rapid 3D printing of microfluidic auto-mixers and colorimetric detection of blood hemoglobin levels. The auto-mixing of reagents with blood via capillary force has been demonstrated in 1 second without the requirement of external pumps. We employed this i POC 3D system for point-of-care diagnosis of anemia using a training set of patients (n anemia  = 16 and n healthy  = 6), which showed consistent measurements of blood hemoglobin levels (a.u.c. = 0.97) and comparable diagnostic sensitivity and specificity, compared with standard clinical hematology analyzer. Capable of 3D fabrication flexibility and smartphone compatibility, this work presents a novel diagnostic strategy for advancing personalized medicine and mobile healthcare.

42 CFR 3.402 - Basis for a civil money penalty.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

42 CFR 3.402 - Basis for a civil money penalty.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

42 CFR 3.402 - Basis for a civil money penalty.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

42 CFR 3.402 - Basis for a civil money penalty.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

42 CFR 3.402 - Basis for a civil money penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Basis for a civil money penalty. 3.402 Section 3... money penalty. (a) General rule. A person who discloses identifiable patient safety work product in knowing or reckless violation of the confidentiality provisions shall be subject to a civil money penalty...

3. INTERIOR VIEW OF MAINTENANCE ROOM OF THE CIVIL ENGINEERING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. INTERIOR VIEW OF MAINTENANCE ROOM OF THE CIVIL ENGINEERING SHOP, BUILDING 103, LOOKING WEST. - Mill Valley Air Force Station, Civil Engineering Maintenance Shop, East Ridgecrest Boulevard, Mount Tamalpais, Mill Valley, Marin County, CA

Programming While Construction of Engineering 3D Models of Complex Geometry

NASA Astrophysics Data System (ADS)

Kheyfets, A. L.

2017-11-01

The capabilities of geometrically accurate computational 3D models construction with the use of programming are presented. The construction of models of an architectural arch and a glo-boid worm gear is considered as an example. The models are designed in the AutoCAD pack-age. Three programs of construction are given. The first program is for designing a multi-section architectural arch. The control of the arch’s geometry by impacting its main parameters is shown. The second program is for designing and studying the working surface of a globoid gear’s worm. The article shows how to make the animation for this surface’s formation. The third program is for formation of a worm gear cavity surface. The cavity formation dynamics is studied. The programs are written in the AutoLisp programming language. The program texts are provided.

APPLICATION OF THE 3D MODEL OF RAILWAY VIADUCTS TO COST ESTIMATION AND CONSTRUCTION

NASA Astrophysics Data System (ADS)

Fujisawa, Yasuo; Yabuki, Nobuyoshi; Igarashi, Zenichi; Yoshino, Hiroyuki

Three dimensional models of civil engineering structures are only partially used in either design or construction but not both. Research on integration of design, cost estimation and construction by 3Dmodels has not been heard in civil engineering domain yet. Using continuously a 3D product model of a structure from design to construction through estimation should improve the efficiency and decrease the occurrence of mistakes, hence enhancing the quality. In this research, we investigated the current practices of flow from design to construction, particularly focusing on cost estimation. Then, we identified advantages and issues on utilization of 3D design models to estimation and construction by applying 3D models to an actual railway construction project.

Space-time evolution of a growth fold (Betic Cordillera, Spain). Evidences from 3D geometrical modelling

NASA Astrophysics Data System (ADS)

Martin-Rojas, Ivan; Alfaro, Pedro; Estévez, Antonio

2014-05-01

We present a study that encompasses several software tools (iGIS©, ArcGIS©, Autocad©, etc.) and data (geological mapping, high resolution digital topographic data, high resolution aerial photographs, etc.) to create a detailed 3D geometric model of an active fault propagation growth fold. This 3D model clearly shows structural features of the analysed fold, as well as growth relationships and sedimentary patterns. The results obtained permit us to discuss the kinematics and structural evolution of the fold and the fault in time and space. The study fault propagation fold is the Crevillente syncline. This fold represents the northern limit of the Bajo Segura Basin, an intermontane basin in the Eastern Betic Cordillera (SE Spain) developed from upper Miocene on. 3D features of the Crevillente syncline, including growth pattern, indicate that limb rotation and, consequently, fault activity was higher during Messinian than during Tortonian; consequently, fault activity was also higher. From Pliocene on our data point that limb rotation and fault activity steadies or probably decreases. This in time evolution of the Crevillente syncline is not the same all along the structure; actually the 3D geometric model indicates that observed lateral heterogeneity is related to along strike variation of fault displacement.

50 CFR 82.20 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Civil rights. 82.20 Section 82.20 Wildlife... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.20 Civil rights. Each cooperative agreement... Civil Rights Act of 1964, 42 U.S.C. 2000d-2000d-4, and with the Secretary's regulations promulgated...

50 CFR 82.20 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false Civil rights. 82.20 Section 82.20 Wildlife... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.20 Civil rights. Each cooperative agreement... Civil Rights Act of 1964, 42 U.S.C. 2000d-2000d-4, and with the Secretary's regulations promulgated...

50 CFR 82.20 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false Civil rights. 82.20 Section 82.20 Wildlife... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.20 Civil rights. Each cooperative agreement... Civil Rights Act of 1964, 42 U.S.C. 2000d-2000d-4, and with the Secretary's regulations promulgated...

50 CFR 82.20 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Civil rights. 82.20 Section 82.20 Wildlife... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.20 Civil rights. Each cooperative agreement... Civil Rights Act of 1964, 42 U.S.C. 2000d-2000d-4, and with the Secretary's regulations promulgated...

50 CFR 82.20 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false Civil rights. 82.20 Section 82.20 Wildlife... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.20 Civil rights. Each cooperative agreement... Civil Rights Act of 1964, 42 U.S.C. 2000d-2000d-4, and with the Secretary's regulations promulgated...

Building a base map with AutoCAD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flarity, S.J.

1989-12-01

The fundamental step in the exploration process is building a base map. Consequently, any serious computer exploration program should be capable of providing base maps. Data used in constructing base maps are available from commercial sources such as Tobin. and Petroleum Information. These data sets include line and well data, the line data being latitude longitude vectors, and the ell data any identifying text information for well and their locations. AutoCAD is a commercial program useful in building base maps. Its features include infinite zoom and pan capability, layering, block definition, text dialog boxes, and a command language, AutoLisp. AutoLispmore » provides more power by allowing the geologist to modify the way the program works. Three AutoLisp routines presented here allow geologists to construct a geologic base map from raw Tobin data. The first program, WELLS.LSP, sets up the map environment for the subsequent programs, WELLADD.LSP and LINEADD.LSP. Welladd.lisp reads the Tobin data and spots the well symbols and the identifying information. Lineadd.lsp performs the same task on line and textural information contained within the data set.« less

Estimation of foot pressure from human footprint depths using 3D scanner

NASA Astrophysics Data System (ADS)

Wibowo, Dwi Basuki; Haryadi, Gunawan Dwi; Priambodo, Agus

2016-03-01

The analysis of normal and pathological variation in human foot morphology is central to several biomedical disciplines, including orthopedics, orthotic design, sports sciences, and physical anthropology, and it is also important for efficient footwear design. A classic and frequently used approach to study foot morphology is analysis of the footprint shape and footprint depth. Footprints are relatively easy to produce and to measure, and they can be preserved naturally in different soils. In this study, we need to correlate footprint depth with corresponding foot pressure of individual using 3D scanner. Several approaches are used for modeling and estimating footprint depths and foot pressures. The deepest footprint point is calculated from z max coordinate-z min coordinate and the average of foot pressure is calculated from GRF divided to foot area contact and identical with the average of footprint depth. Evaluation of footprint depth was found from importing 3D scanner file (dxf) in AutoCAD, the z-coordinates than sorted from the highest to the lowest value using Microsoft Excel to make footprinting depth in difference color. This research is only qualitatif study because doesn't use foot pressure device as comparator, and resulting the maximum pressure on calceneus is 3.02 N/cm2, lateral arch is 3.66 N/cm2, and metatarsal and hallux is 3.68 N/cm2.

Computer-Aided-Design of the Hydraulic System of Three-Dimensional Cartridge Valve Blocks (Selected Articles)

DTIC Science & Technology

1991-03-21

sectional representation of the spatial figure can be correctly determined. 6 The AutoLisp language system in the AutoCAD software provides the most...softwares are developed on the 32-bit machines and little progress has been reported for the 16-bit machines. Even the AutoCAD is a two-ard-a-half... AutoCAD software as the basis, developed the design package of 3-D cartridge valve blocks on IM PC/AT. To realize the 3-D displaying of cartridge valves

42 CFR 423.750 - Types of intermediate sanctions and civil money penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Types of intermediate sanctions and civil money... BENEFIT Intermediate Sanctions § 423.750 Types of intermediate sanctions and civil money penalties. (a... Medicare beneficiaries by a Part D plan sponsor. (b) CMS may impose civil money penalties as specified in...

42 CFR 423.750 - Types of intermediate sanctions and civil money penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Types of intermediate sanctions and civil money... BENEFIT Intermediate Sanctions § 423.750 Types of intermediate sanctions and civil money penalties. (a... Medicare beneficiaries by a Part D plan sponsor. (b) CMS may impose civil money penalties as specified in...

42 CFR 423.758 - Collection of civil money penalties imposed by CMS.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Collection of civil money penalties imposed by CMS... BENEFIT Intermediate Sanctions § 423.758 Collection of civil money penalties imposed by CMS. (a) When a Part D plan sponsor does not request a hearing CMS initiates collection of the civil money penalty...

3D modeling of satellite spectral images, radiation budget and energy budget of urban landscapes

NASA Astrophysics Data System (ADS)

Gastellu-Etchegorry, J. P.

2008-12-01

DART EB is a model that is being developed for simulating the 3D (3 dimensional) energy budget of urban and natural scenes, possibly with topography and atmosphere. It simulates all non radiative energy mechanisms (heat conduction, turbulent momentum and heat fluxes, water reservoir evolution, etc.). It uses DART model (Discrete Anisotropic Radiative Transfer) for simulating radiative mechanisms: 3D radiative budget of 3D scenes and their remote sensing images expressed in terms of reflectance or brightness temperature values, for any atmosphere, wavelength, sun/view direction, altitude and spatial resolution. It uses an innovative multispectral approach (ray tracing, exact kernel, discrete ordinate techniques) over the whole optical domain. This paper presents two major and recent improvements of DART for adapting it to urban canopies. (1) Simulation of the geometry and optical characteristics of urban elements (houses, etc.). (2) Modeling of thermal infrared emission by vegetation and urban elements. The new DART version was used in the context of the CAPITOUL project. For that, districts of the Toulouse urban data base (Autocad format) were translated into DART scenes. This allowed us to simulate visible, near infrared and thermal infrared satellite images of Toulouse districts. Moreover, the 3D radiation budget was used by DARTEB for simulating the time evolution of a number of geophysical quantities of various surface elements (roads, walls, roofs). Results were successfully compared with ground measurements of the CAPITOUL project.

42 CFR 423.750 - Types of intermediate sanctions and civil money penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 3 2011-10-01 2011-10-01 false Types of intermediate sanctions and civil money... Intermediate Sanctions § 423.750 Types of intermediate sanctions and civil money penalties. (a) The following... by a Part D plan sponsor. (b) CMS may impose civil money penalties as specified in 423.760. [72 FR...

42 CFR 423.758 - Collection of civil money penalties imposed by CMS.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Collection of civil money penalties imposed by CMS... Intermediate Sanctions § 423.758 Collection of civil money penalties imposed by CMS. (a) When a Part D plan sponsor does not request a hearing CMS initiates collection of the civil money penalty following the...

Feasibility of Tactical Air Delivery Resupply Using Gliders

DTIC Science & Technology

2016-12-01

using modern design and manufacturing techniques including AutoCAD, 3D printing , laser cutting and CorelDraw, and conducting field testing and...Sparrow,” using modern design and manufacturing techniques including AutoCAD, 3D printing , laser cutting and CorelDraw, and conducting field testing and...the desired point(s) of impact due to the atmospheric three-dimensional ( 3D ) wind and density field encountered by the descending load under canopy

Civil Defense, U. S. A.: A Programmed Orientation to Civil Defense. Unit 3. Natural Disasters.

ERIC Educational Resources Information Center

Defense Civil Preparedness Agency (DOD), Battle Creek, MI.

The effects of natural disasters and the implications which those effects have for community emergency preparedness are discussed. Major topics include: (1) Similarities and differences in types of responses required by a nuclear and natural disasters, (2) The civil defense function in natural disasters, (3) Vulnerability analysis, (4) Warning…

Development and Evaluation of 2-D and 3-D Exocentric Synthetic Vision Navigation Display Concepts for Commercial Aircraft

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III; Kramer, Lynda J.; Arthur, J. J., III; Bailey, Randall E.; Sweeters, Jason L.

2005-01-01

NASA's Synthetic Vision Systems (SVS) project is developing technologies with practical applications that will help to eliminate low visibility conditions as a causal factor to civil aircraft accidents while replicating the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. The paper describes experimental evaluation of a multi-mode 3-D exocentric synthetic vision navigation display concept for commercial aircraft. Experimental results evinced the situation awareness benefits of 2-D and 3-D exocentric synthetic vision displays over traditional 2-D co-planar navigation and vertical situation displays. Conclusions and future research directions are discussed.

3D change detection - Approaches and applications

NASA Astrophysics Data System (ADS)

Qin, Rongjun; Tian, Jiaojiao; Reinartz, Peter

2016-12-01

Due to the unprecedented technology development of sensors, platforms and algorithms for 3D data acquisition and generation, 3D spaceborne, airborne and close-range data, in the form of image based, Light Detection and Ranging (LiDAR) based point clouds, Digital Elevation Models (DEM) and 3D city models, become more accessible than ever before. Change detection (CD) or time-series data analysis in 3D has gained great attention due to its capability of providing volumetric dynamics to facilitate more applications and provide more accurate results. The state-of-the-art CD reviews aim to provide a comprehensive synthesis and to simplify the taxonomy of the traditional remote sensing CD techniques, which mainly sit within the boundary of 2D image/spectrum analysis, largely ignoring the particularities of 3D aspects of the data. The inclusion of 3D data for change detection (termed 3D CD), not only provides a source with different modality for analysis, but also transcends the border of traditional top-view 2D pixel/object-based analysis to highly detailed, oblique view or voxel-based geometric analysis. This paper reviews the recent developments and applications of 3D CD using remote sensing and close-range data, in support of both academia and industry researchers who seek for solutions in detecting and analyzing 3D dynamics of various objects of interest. We first describe the general considerations of 3D CD problems in different processing stages and identify CD types based on the information used, being the geometric comparison and geometric-spectral analysis. We then summarize relevant works and practices in urban, environment, ecology and civil applications, etc. Given the broad spectrum of applications and different types of 3D data, we discuss important issues in 3D CD methods. Finally, we present concluding remarks in algorithmic aspects of 3D CD.

Multimodal and synthetic aperture approach to full-field 3D shape and displacement measurements

NASA Astrophysics Data System (ADS)

Kujawińska, M.; Sitnik, R.

2017-08-01

Recently most of the measurement tasks in industry, civil engineering and culture heritage applications require archiving, characterization and monitoring of 3D objects and structures and their performance under changing conditions. These requirements can be met if multimodal measurement (MM) strategy is applied. It rely on effective combining structured light method and 3D digital image correlation with laser scanning/ToF, thermal imaging, multispectral imaging and BDRF measurements. In the case of big size and/or complicated objects MM have to be combined with hierarchical or synthetic aperture (SA) measurements. The new solutions in MM and SA strategies are presented and their applicability is shown at interesting cultural heritage and civil engineering applications.

3 CFR 8654 - Proclamation 8654 of April 12, 2011. Civil War Sesquicentennial

Code of Federal Regulations, 2012 CFR

2012-01-01

... the first shots of a civil war that would stretch across 4 years of tremendous sacrifice, with over 3... our fate might be, it would be as one Nation. The Civil War was a conflict characterized by legendary... was secured, blue and gray would unite under one flag and the institution of slavery would be forever...

7 CFR 3560.2 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 15 2012-01-01 2012-01-01 false Civil rights. 3560.2 Section 3560.2 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS General Provisions and Definitions § 3560.2 Civil rights. (a... prohibition under Title VI of the Civil Rights Act of 1964, 42 U.S.C. 2000d and Title VI regulations against...

13 CFR 302.20 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Civil rights. 302.20 Section 302... TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.20 Civil rights. (a) Discrimination is prohibited... 601 of Title VI of the Civil Rights Act of 1964, as amended (42 U.S.C. 2000d et seq.) (proscribing...

13 CFR 302.20 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Civil rights. 302.20 Section 302... TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.20 Civil rights. (a) Discrimination is prohibited... 601 of Title VI of the Civil Rights Act of 1964, as amended (42 U.S.C. 2000d et seq.) (proscribing...

7 CFR 3560.2 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Civil rights. 3560.2 Section 3560.2 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS General Provisions and Definitions § 3560.2 Civil rights. (a... prohibition under Title VI of the Civil Rights Act of 1964, 42 U.S.C. 2000d and Title VI regulations against...

13 CFR 302.20 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Civil rights. 302.20 Section 302... TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.20 Civil rights. (a) Discrimination is prohibited... 601 of Title VI of the Civil Rights Act of 1964, as amended (42 U.S.C. 2000d et seq.) (proscribing...

13 CFR 302.20 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Civil rights. 302.20 Section 302... TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.20 Civil rights. (a) Discrimination is prohibited... 601 of Title VI of the Civil Rights Act of 1964, as amended (42 U.S.C. 2000d et seq.) (proscribing...

7 CFR 3560.2 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Civil rights. 3560.2 Section 3560.2 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS General Provisions and Definitions § 3560.2 Civil rights. (a... prohibition under Title VI of the Civil Rights Act of 1964, 42 U.S.C. 2000d and Title VI regulations against...

13 CFR 302.20 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Civil rights. 302.20 Section 302... TERMS AND CONDITIONS FOR INVESTMENT ASSISTANCE § 302.20 Civil rights. (a) Discrimination is prohibited... 601 of Title VI of the Civil Rights Act of 1964, as amended (42 U.S.C. 2000d et seq.) (proscribing...

7 CFR 3560.2 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Civil rights. 3560.2 Section 3560.2 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS General Provisions and Definitions § 3560.2 Civil rights. (a... prohibition under Title VI of the Civil Rights Act of 1964, 42 U.S.C. 2000d and Title VI regulations against...

7 CFR 3560.2 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Civil rights. 3560.2 Section 3560.2 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS General Provisions and Definitions § 3560.2 Civil rights. (a... prohibition under Title VI of the Civil Rights Act of 1964, 42 U.S.C. 2000d and Title VI regulations against...

76 FR 71431 - Civil Penalty Calculation Methodology

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-17

... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration Civil Penalty Calculation... is currently evaluating its civil penalty methodology. Part of this evaluation includes a forthcoming... civil penalties. UFA takes into account the statutory penalty factors under 49 U.S.C. 521(b)(2)(D). The...

42 CFR 59.209 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Civil rights. 59.209 Section 59.209 Public Health... Grants for Family Planning Service Training § 59.209 Civil rights. Attention is called to the requirements of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. 2000d et seq.) and in...

42 CFR 59.209 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Civil rights. 59.209 Section 59.209 Public Health... Grants for Family Planning Service Training § 59.209 Civil rights. Attention is called to the requirements of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. 2000d et seq.) and in...

42 CFR 59.209 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Civil rights. 59.209 Section 59.209 Public Health... Grants for Family Planning Service Training § 59.209 Civil rights. Attention is called to the requirements of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. 2000d et seq.) and in...

42 CFR 59.209 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Civil rights. 59.209 Section 59.209 Public Health... Grants for Family Planning Service Training § 59.209 Civil rights. Attention is called to the requirements of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. 2000d et seq.) and in...

42 CFR 59.209 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Civil rights. 59.209 Section 59.209 Public Health... Grants for Family Planning Service Training § 59.209 Civil rights. Attention is called to the requirements of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. 2000d et seq.) and in...

3. PHOTOCOPY OF DRAWING (1976 CIVIL ENGINEERING DRAWING BY THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. PHOTOCOPY OF DRAWING (1976 CIVIL ENGINEERING DRAWING BY THE SPACE AND MISSILE TEST CENTER, VAFB, USAF) PARTIAL SITE PLAN, EQUIPMENT STORAGE BUILDING, PARKING AREA OVERLAY, AND NEW ROAD, SHEET C4 - Vandenberg Air Force Base, Space Launch Complex 3, Storage Shed, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Sandia Advanced MEMS Design Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor R.; Allen, James J.; Lantz, Jeffrey W.

This is a major revision to the Sandia Advanced MEMS Design Tools. It replaces all previous versions. New features in this version: Revised to support AutoCAD 2014 and 2015 This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exists somemore » files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

Extending 3D city models with legal information

NASA Astrophysics Data System (ADS)

Frank, A. U.; Fuhrmann, T.; Navratil, G.

2012-10-01

3D city models represent existing physical objects and their topological and functional relations. In everyday life the rights and responsibilities connected to these objects, primarily legally defined rights and obligations but also other socially and culturally established rights, are of importance. The rights and obligations are defined in various laws and it is often difficult to identify the rules applicable for a certain case. The existing 2D cadastres show civil law rights and obligations and plans to extend them to provide information about public law restrictions for land use are in several countries under way. It is tempting to design extensions to the 3D city models to provide information about legal rights in 3D. The paper analyses the different types of information that are needed to reduce conflicts and to facilitate decisions about land use. We identify the role 3D city models augmented with planning information in 3D can play, but do not advocate a general conversion from 2D to 3D for the legal cadastre. Space is not anisotropic and the up/down dimension is practically very different from the two dimensional plane - this difference must be respected when designing spatial information systems. The conclusions are: (1) continue the current regime for ownership of apartments, which is not ownership of a 3D volume, but co-ownership of a building with exclusive use of some rooms; such exclusive use rights could be shown in a 3D city model; (2) ownership of 3D volumes for complex and unusual building situations can be reported in a 3D city model, but are not required everywhere; (3) indicate restrictions for land use and building in 3D city models, with links to the legal sources.

Integration into Civil Airspace Airworthiness and Safety

DTIC Science & Technology

2003-09-02

Integration into Civil Airspace Airworthiness and Safety 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER......into civil airspace lPurpose : n to explore and propose French process and means for integrating UAV into civil airspace. lMethod based on : n first

Civil Rightsspeak.

ERIC Educational Resources Information Center

Williams, Walter E.

1986-01-01

Today's civil rights debate is clouded by ambiguities of language. The following frequently misused words are clarified in the text so the issues can be properly addressed: 1) segregation; 2) desegregation; 3) minority group; 4) civil rights; 5) compensatory; 6) statistical disparities; and 7) racist. (PS)

32 CFR 215.9 - Providing military resources to civil authorities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Commander employed at an objective area during a civil disturbance. (3) Requests for Group Three resources... the General Counsel of the DoD, the Assistant Secretary of Defense (Installations and Logistics), and...

32 CFR 215.9 - Providing military resources to civil authorities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Commander employed at an objective area during a civil disturbance. (3) Requests for Group Three resources... the General Counsel of the DoD, the Assistant Secretary of Defense (Installations and Logistics), and...

32 CFR 215.9 - Providing military resources to civil authorities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Commander employed at an objective area during a civil disturbance. (3) Requests for Group Three resources... the General Counsel of the DoD, the Assistant Secretary of Defense (Installations and Logistics), and...

32 CFR 215.9 - Providing military resources to civil authorities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Commander employed at an objective area during a civil disturbance. (3) Requests for Group Three resources... the General Counsel of the DoD, the Assistant Secretary of Defense (Installations and Logistics), and...

32 CFR 215.9 - Providing military resources to civil authorities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Commander employed at an objective area during a civil disturbance. (3) Requests for Group Three resources... the General Counsel of the DoD, the Assistant Secretary of Defense (Installations and Logistics), and...

Concept development of a Mach 3.0 high-speed civil transport

NASA Technical Reports Server (NTRS)

Robins, A. Warner; Dollyhigh, Samuel M.; Beissner, Fred L., Jr.; Geiselhart, Karl; Martin, Glenn L.; Shields, E. W.; Swanson, E. E.; Coen, Peter G.; Morris, Shelby J., Jr.

1988-01-01

A baseline concept for a Mach 3.0 high-speed civil transport concept was developed as part of a national program with the goal that concepts and technologies be developed which will enable an effective long-range high-speed civil transport system. The Mach 3.0 concept reported represents an aggressive application of advanced technology to achieve the design goals. The level of technology is generally considered to be that which could have a demonstrated availability date of 1995 to 2000. The results indicate that aircraft are technically feasible that could carry 250 passengers at Mach 3.0 cruise for a 6500 nautical mile range at a size, weight and performance level that allows it to fit into the existing world airport structure. The details of the configuration development, aerodynamic design, propulsion system design and integration, mass properties, mission performance, and sizing are presented.

7 CFR 3.91 - Adjusted civil monetary penalties.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Secretary issued pursuant to the Dairy Product Mandatory Reporting program, codified at 7 U.S.C. 1637b(c)(4... Protection Act disqualification, codified at 15 U.S.C. 1825(c), has a maximum of $4,300. (x) Civil penalty....C. 1786(h)(8)(H)(i), has a maximum of $145,200,000. (v) Civil penalty for a vendor convicted of...

Recovering from Katrina. Air Force Civil Engineer, Volume 13, Number 3, 2005

DTIC Science & Technology

2005-01-01

Texas, Col Patrick is responsible for providing functional leadership and technical guidance to civil engineer units supporting the more than...delivery of facilities prior to the Wing’s initial operational capability date. Attitude was affected by strong leadership from a senior executive...Warfare Ramping Up for AM-2’s Replacement Mr. Joe D. Fisher ACC/A7XX History of AM-2 AM-2 aluminum matting, an evolution of the pierced steel plank

DoD Capability Benefits from Preserving the Civil Reserve Air Fleet (CRAF)

DTIC Science & Technology

2011-04-23

Master of Military Studies Research Paper September 2010- April 2011 4. TITLE AND SUBTITLE DoP capability benefits from preserving the Civil Reserve Air...capability benefits from preserving the Civil Reserve Air Fleet (CRAF) SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER...1 Executive Summary Title: DOD capability benefits from preserving the Civil Reserve Air Fleet (CRAF) Author: Major Constantine E. Tsoukatos

The Use of 3d City Models Form Oblique Images on Land Administration

NASA Astrophysics Data System (ADS)

Bakici, S.; Erkek, B.; Ayyildiz, E.; Özmüş, L.

2017-11-01

The article 718 of the civil law saying "The ownership on property includes the air above and terrain layers below to an extent providing benefit. The structures, plants and sources are included in the content of this ownership reserving the legal restrictions" and the cadastre law no. 3402 envisage 3D Cadastre. 3D data is required in order to perform 3D cadastre. To meet this requirement, oblique photogrammetry arises as the main data acquisition method. The data obtained by this method is used as base in 3D Cadastre and Land Administration activities. 3D cadastre required in the context of land administration activities in Turkey demands high resolution aerial oblique images to be used in services such as real estate value assessment & marketing in urban areas, urban planning, unlicensed construction monitoring & city administration and making location data (national address data etc.) intelligent.

GIS Data Based Automatic High-Fidelity 3D Road Network Modeling

NASA Technical Reports Server (NTRS)

Wang, Jie; Shen, Yuzhong

2011-01-01

3D road models are widely used in many computer applications such as racing games and driving simulations_ However, almost all high-fidelity 3D road models were generated manually by professional artists at the expense of intensive labor. There are very few existing methods for automatically generating 3D high-fidelity road networks, especially those existing in the real world. This paper presents a novel approach thai can automatically produce 3D high-fidelity road network models from real 2D road GIS data that mainly contain road. centerline in formation. The proposed method first builds parametric representations of the road centerlines through segmentation and fitting . A basic set of civil engineering rules (e.g., cross slope, superelevation, grade) for road design are then selected in order to generate realistic road surfaces in compliance with these rules. While the proposed method applies to any types of roads, this paper mainly addresses automatic generation of complex traffic interchanges and intersections which are the most sophisticated elements in the road networks

The 3D Elevation Program and America's infrastructure

USGS Publications Warehouse

Lukas, Vicki; Carswell, Jr., William J.

2016-11-07

Infrastructure—the physical framework of transportation, energy, communications, water supply, and other systems—and construction management—the overall planning, coordination, and control of a project from beginning to end—are critical to the Nation’s prosperity. The American Society of Civil Engineers has warned that, despite the importance of the Nation’s infrastructure, it is in fair to poor condition and needs sizable and urgent investments to maintain and modernize it, and to ensure that it is sustainable and resilient. Three-dimensional (3D) light detection and ranging (lidar) elevation data provide valuable productivity, safety, and cost-saving benefits to infrastructure improvement projects and associated construction management. By providing data to users, the 3D Elevation Program (3DEP) of the U.S. Geological Survey reduces users’ costs and risks and allows them to concentrate on their mission objectives. 3DEP includes (1) data acquisition partnerships that leverage funding, (2) contracts with experienced private mapping firms, (3) technical expertise, lidar data standards, and specifications, and (4) most important, public access to high-quality 3D elevation data. The size and breadth of improvements for the Nation’s infrastructure and construction management needs call for an efficient, systematic approach to acquiring foundational 3D elevation data. The 3DEP approach to national data coverage will yield large cost savings over individual project-by-project acquisitions and will ensure that data are accessible for other critical applications.

5 CFR 213.3402 - Entire executive civil service; Pathways Programs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Entire executive civil service; Pathways Programs. 213.3402 Section 213.3402 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS EXCEPTED SERVICE Excepted Schedules Schedule D § 213.3402 Entire executive civil service; Pathways...

5 CFR 213.3402 - Entire executive civil service; Pathways Programs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Entire executive civil service; Pathways Programs. 213.3402 Section 213.3402 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS EXCEPTED SERVICE Excepted Schedules Schedule D § 213.3402 Entire executive civil service; Pathways...

Optoelectronic instrumentation enhancement using data mining feedback for a 3D measurement system

NASA Astrophysics Data System (ADS)

Flores-Fuentes, Wendy; Sergiyenko, Oleg; Gonzalez-Navarro, Félix F.; Rivas-López, Moisés; Hernandez-Balbuena, Daniel; Rodríguez-Quiñonez, Julio C.; Tyrsa, Vera; Lindner, Lars

2016-12-01

3D measurement by a cyber-physical system based on optoelectronic scanning instrumentation has been enhanced by outliers and regression data mining feedback. The prototype has applications in (1) industrial manufacturing systems that include: robotic machinery, embedded vision, and motion control, (2) health care systems for measurement scanning, and (3) infrastructure by providing structural health monitoring. This paper presents new research performed in data processing of a 3D measurement vision sensing database. Outliers from multivariate data have been detected and removal to improve artificial intelligence regression algorithm results. Physical measurement error regression data has been used for 3D measurements error correction. Concluding, that the joint of physical phenomena, measurement and computation is an effectiveness action for feedback loops in the control of industrial, medical and civil tasks.

30 CFR 903.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 903.845 Section 903.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ARIZONA § 903.845 Civil penalties. Part 845 of this chapter, Civil Penalties, applies to the assessment of civil penalties for violations...

30 CFR 937.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 937.845 Section 937.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 921.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 921.845 Section 921.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MASSACHUSETTS § 921.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 947.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 947.845 Section 947.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE WASHINGTON § 947.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 910.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 910.845 Section 910.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 941.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 941.845 Section 941.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 903.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 903.845 Section 903.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ARIZONA § 903.845 Civil penalties. Part 845 of this chapter, Civil Penalties, applies to the assessment of civil penalties for violations...

30 CFR 937.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 937.845 Section 937.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 905.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 905.845 Section 905.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA § 905.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 939.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 939.845 Section 939.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 921.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 921.845 Section 921.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MASSACHUSETTS § 921.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 921.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 921.845 Section 921.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MASSACHUSETTS § 921.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 921.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 921.845 Section 921.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MASSACHUSETTS § 921.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 941.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 941.845 Section 941.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 912.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 912.845 Section 912.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 937.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 937.845 Section 937.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 933.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 933.845 Section 933.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE NORTH CAROLINA § 933.845 Civil penalties. Part 845 of this chaper, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 910.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 910.845 Section 910.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 912.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 912.845 Section 912.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 933.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 933.845 Section 933.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE NORTH CAROLINA § 933.845 Civil penalties. Part 845 of this chaper, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 912.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 912.845 Section 912.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 937.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 937.845 Section 937.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 910.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 910.845 Section 910.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 937.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 937.845 Section 937.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 922.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 922.845 Section 922.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 905.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 905.845 Section 905.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA § 905.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 942.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 942.845 Section 942.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TENNESSEE § 942.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 912.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 912.845 Section 912.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 941.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 941.845 Section 941.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 939.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 939.845 Section 939.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 942.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 942.845 Section 942.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TENNESSEE § 942.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 947.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 947.845 Section 947.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE WASHINGTON § 947.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 905.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 905.845 Section 905.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA § 905.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 903.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 903.845 Section 903.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ARIZONA § 903.845 Civil penalties. Part 845 of this chapter, Civil Penalties, applies to the assessment of civil penalties for violations...

30 CFR 942.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 942.845 Section 942.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TENNESSEE § 942.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 942.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 942.845 Section 942.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TENNESSEE § 942.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 903.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 903.845 Section 903.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ARIZONA § 903.845 Civil penalties. Part 845 of this chapter, Civil Penalties, applies to the assessment of civil penalties for violations...

30 CFR 947.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 947.845 Section 947.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE WASHINGTON § 947.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 905.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 905.845 Section 905.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA § 905.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 910.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 910.845 Section 910.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 939.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 939.845 Section 939.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 922.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 922.845 Section 922.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 947.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 947.845 Section 947.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE WASHINGTON § 947.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 922.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 922.845 Section 922.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 933.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 933.845 Section 933.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE NORTH CAROLINA § 933.845 Civil penalties. Part 845 of this chaper, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 941.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 941.845 Section 941.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 933.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 933.845 Section 933.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE NORTH CAROLINA § 933.845 Civil penalties. Part 845 of this chaper, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 903.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 903.845 Section 903.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE ARIZONA § 903.845 Civil penalties. Part 845 of this chapter, Civil Penalties, applies to the assessment of civil penalties for violations...

30 CFR 939.845 - Civil penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil penalties. 939.845 Section 939.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 922.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 922.845 Section 922.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 947.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 947.845 Section 947.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE WASHINGTON § 947.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 910.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 910.845 Section 910.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 933.845 - Civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil penalties. 933.845 Section 933.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE NORTH CAROLINA § 933.845 Civil penalties. Part 845 of this chaper, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 922.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 922.845 Section 922.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 921.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 921.845 Section 921.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MASSACHUSETTS § 921.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 942.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 942.845 Section 942.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TENNESSEE § 942.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 939.845 - Civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil penalties. 939.845 Section 939.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

30 CFR 905.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 905.845 Section 905.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA § 905.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply to the assessment of civil penalties for...

30 CFR 912.845 - Civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil penalties. 912.845 Section 912.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for violations...

30 CFR 941.845 - Civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil penalties. 941.845 Section 941.845... PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.845 Civil penalties. Part 845 of this chapter, Civil Penalties, shall apply when civil penalties are assessed for...

Civil Defense, U. S. A.: A Programmed Orientation to Civil Defense. Unit 1. Civil Defense - Protection Against What?

ERIC Educational Resources Information Center

Defense Civil Preparedness Agency (DOD), Battle Creek, MI.

An explanation of the need for civil defense in nuclear and natural disasters is presented. A brief historical background of civil defense is given. Major topics include: (1) Types of disasters, (2) Probable objectives of a nuclear attack on the United States, (3) The major defensive measures against a nuclear attack, (4) Some reasons for low…

L-3 Com AVISYS civil aviation self-protection system

NASA Astrophysics Data System (ADS)

Carey, Jim

2006-05-01

In early 2004, L-3 Com AVISYS Corporation (hereinafter referred to as L-3 AVISYS or AVISYS) completed a contract for the integration and deployment of an advanced Infrared Countermeasures self-protection suite for a Head of State Airbus A340 aircraft. This initial L-3 AVISYS IRCM Suite was named WIPPS (Widebody Integrated Platform Protection System). The A340 WIPPS installation provisions were FAA certified with the initial deployment of the modified aircraft. WIPPS is unique in that it utilizes a dual integrated missile warning subsystem to produce a robust, multi-spectral, ultra-low false alarm rate threat warning capability. WIPPS utilizes the Thales MWS-20 Pulsed Doppler Radar Active MWS and the EADS AN/AAR-60 Ultraviolet Passive MWS. These MWS subsystems are integrated through an L-3 AVISYS Electronic Warfare Control Set (EWCS). The EWCS also integrates the WIPPS MWS threat warning information with the A340 flight computer data to optimize ALE-47 Countermeasure Dispensing System IR decoy dispensing commands, program selection and timing. WIPPS utilizes standard and advanced IR Decoys produced by ARMTEC Defense and Alloy Surfaces. WIPPS demonstrated that when IR decoy dispensing is controlled by threat range and time-to-go information provided by an Active MWS, unsurpassed self protection levels are achievable. Recognizing the need for high volume civil aviation protection, L-3 AVISYS configured a variant of WIPPS optimized for commercial airline reliability requirements, safety requirements, supportability and most importantly, affordability. L-3 AVISYS refers to this IRCM suite as CAPS (Commercial Airliner Protection System). CAPS has been configured for applications to all civil aircraft ranging from the small Regional Jets to the largest Wide-bodies. This presentation and paper will provide an overview of the initial WIPPS IRCM Suite and the important factors that were considered in defining the CAPS configuration.

Improving Semantic Updating Method on 3d City Models Using Hybrid Semantic-Geometric 3d Segmentation Technique

NASA Astrophysics Data System (ADS)

Sharkawi, K.-H.; Abdul-Rahman, A.

2013-09-01

Cities and urban areas entities such as building structures are becoming more complex as the modern human civilizations continue to evolve. The ability to plan and manage every territory especially the urban areas is very important to every government in the world. Planning and managing cities and urban areas based on printed maps and 2D data are getting insufficient and inefficient to cope with the complexity of the new developments in big cities. The emergence of 3D city models have boosted the efficiency in analysing and managing urban areas as the 3D data are proven to represent the real world object more accurately. It has since been adopted as the new trend in buildings and urban management and planning applications. Nowadays, many countries around the world have been generating virtual 3D representation of their major cities. The growing interest in improving the usability of 3D city models has resulted in the development of various tools for analysis based on the 3D city models. Today, 3D city models are generated for various purposes such as for tourism, location-based services, disaster management and urban planning. Meanwhile, modelling 3D objects are getting easier with the emergence of the user-friendly tools for 3D modelling available in the market. Generating 3D buildings with high accuracy also has become easier with the availability of airborne Lidar and terrestrial laser scanning equipments. The availability and accessibility to this technology makes it more sensible to analyse buildings in urban areas using 3D data as it accurately represent the real world objects. The Open Geospatial Consortium (OGC) has accepted CityGML specifications as one of the international standards for representing and exchanging spatial data, making it easier to visualize, store and manage 3D city models data efficiently. CityGML able to represents the semantics, geometry, topology and appearance of 3D city models in five well-defined Level-of-Details (LoD), namely LoD0

Civilizing Civil Procedure.

ERIC Educational Resources Information Center

Ticcioni, Daniel A.

1981-01-01

A "Civil Litigation Exercise" (a litigation simulation) conducted during the second semester of a first year procedure course at the New England School of Law is described. The purpose of the exercise is to simulate the real world of adversary pleading and practice. The Civil Procedure Litigation exercises are appended. (MLW)

Effectiveness of the Civil Aviation Security Program.

DTIC Science & Technology

1976-04-19

AD-At𔃻A 424 FEDERAL AVIATION ADMINISTRATION WASHINGToN DC OFFICE 7 ETC F/6 1/2 EFFECTIVENESS OF THE CIVIL AVIATION SECURITY PROGRAM. U) APR 76...April 19, 1976 Semiannual Report to Congress -on the Effectiveness 6. Pefom,-g o,qn.st.,n Cad of the Civil Aviation Security Program __._. P..I.,mng O,oon...Aviatio’n Administration Office of Civil Aviation Security 1i. C0a,,,c , ,No. 0800 Independence Avenue, SW. Washington, D.C. 20591 13. 7ype of Row iaend Pe

Computer 3D site model generation based on aerial images

NASA Astrophysics Data System (ADS)

Zheltov, Sergey Y.; Blokhinov, Yuri B.; Stepanov, Alexander A.; Skryabin, Sergei V.; Sibiriakov, Alexandre V.

1997-07-01

The technology for 3D model design of real world scenes and its photorealistic rendering are current topics of investigation. Development of such technology is very attractive to implement in vast varieties of applications: military mission planning, crew training, civil engineering, architecture, virtual reality entertainments--just a few were mentioned. 3D photorealistic models of urban areas are often discussed now as upgrade from existing 2D geographic information systems. Possibility of site model generation with small details depends on two main factors: available source dataset and computer power resources. In this paper PC based technology is presented, so the scenes of middle resolution (scale of 1:1000) be constructed. Types of datasets are the gray level aerial stereo pairs of photographs (scale of 1:14000) and true color on ground photographs of buildings (scale ca.1:1000). True color terrestrial photographs are also necessary for photorealistic rendering, that in high extent improves human perception of the scene.

49 CFR 190.221 - Civil penalties generally.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Civil penalties generally. 190.221 Section 190.221... REGULATORY PROCEDURES Enforcement Civil Penalties § 190.221 Civil penalties generally. When a Regional... appropriate civil penalty. [Amdt. 190-16, 78 FR 58912, Sept. 25, 2013] ...

78 FR 5760 - Civil Monetary Penalty Inflation Adjustment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers 33 CFR Part 326 RIN 0710-AA66 Civil Monetary Penalty Inflation Adjustment AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Proposed... its Class I civil penalties under the Clean Water Act and the National Fishing Enhancement Act to...

41 CFR 105-68.920 - Civil judgment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Civil judgment. 105-68... Administration 68-GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 105-68.920 Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction...

49 CFR 190.221 - Civil penalties generally.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Civil penalties generally. 190.221 Section 190.221... PROCEDURES Enforcement Civil Penalties § 190.221 Civil penalties generally. When the Associate Administrator..., if appropriate, compromise a civil penalty. [Amdt. 190-6, 61 FR 18515, Apr. 26, 1996] ...

41 CFR 105-68.920 - Civil judgment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Civil judgment. 105-68... Administration 68-GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 105-68.920 Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction...

41 CFR 105-68.920 - Civil judgment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false Civil judgment. 105-68... Administration 68-GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 105-68.920 Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction...

41 CFR 105-68.920 - Civil judgment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false Civil judgment. 105-68... Administration 68-GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 105-68.920 Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction...

41 CFR 105-68.920 - Civil judgment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false Civil judgment. 105-68... Administration 68-GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 105-68.920 Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction...

39 CFR 235.2 - Civil preparedness.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 39 Postal Service 1 2013-07-01 2013-07-01 false Civil preparedness. 235.2 Section 235.2 Postal... Civil preparedness. (a) Mission. The prime objective of postal emergency preparedness planning is to... programs: (1) National Civil Preparedness and Defense Mobilization; (2) Natural Disaster Preparedness; (3...

39 CFR 235.2 - Civil preparedness.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Civil preparedness. 235.2 Section 235.2 Postal... Civil preparedness. (a) Mission. The prime objective of postal emergency preparedness planning is to... programs: (1) National Civil Preparedness and Defense Mobilization; (2) Natural Disaster Preparedness; (3...

39 CFR 235.2 - Civil preparedness.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 39 Postal Service 1 2012-07-01 2012-07-01 false Civil preparedness. 235.2 Section 235.2 Postal... Civil preparedness. (a) Mission. The prime objective of postal emergency preparedness planning is to... programs: (1) National Civil Preparedness and Defense Mobilization; (2) Natural Disaster Preparedness; (3...

39 CFR 235.2 - Civil preparedness.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 39 Postal Service 1 2011-07-01 2011-07-01 false Civil preparedness. 235.2 Section 235.2 Postal... Civil preparedness. (a) Mission. The prime objective of postal emergency preparedness planning is to... programs: (1) National Civil Preparedness and Defense Mobilization; (2) Natural Disaster Preparedness; (3...

39 CFR 235.2 - Civil preparedness.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 39 Postal Service 1 2014-07-01 2014-07-01 false Civil preparedness. 235.2 Section 235.2 Postal... Civil preparedness. (a) Mission. The prime objective of postal emergency preparedness planning is to... programs: (1) National Civil Preparedness and Defense Mobilization; (2) Natural Disaster Preparedness; (3...

12 CFR 229.21 - Civil liability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 3 2014-01-01 2014-01-01 false Civil liability. 229.21 Section 229.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM... Disclosure of Funds Availability Policies § 229.21 Civil liability. (a) Civil liability. A bank that fails to...

12 CFR 229.21 - Civil liability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Civil liability. 229.21 Section 229.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM... Availability Policies § 229.21 Civil liability. (a) Civil liability. A bank that fails to comply with any...

12 CFR 229.21 - Civil liability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 3 2012-01-01 2012-01-01 false Civil liability. 229.21 Section 229.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM... Availability Policies § 229.21 Civil liability. (a) Civil liability. A bank that fails to comply with any...

12 CFR 229.21 - Civil liability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Civil liability. 229.21 Section 229.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM... Availability Policies § 229.21 Civil liability. (a) Civil liability. A bank that fails to comply with any...

12 CFR 229.21 - Civil liability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 3 2013-01-01 2013-01-01 false Civil liability. 229.21 Section 229.21 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM... Disclosure of Funds Availability Policies § 229.21 Civil liability. (a) Civil liability. A bank that fails to...

30 CFR 881.12 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil rights. 881.12 Section 881.12 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.12 Civil rights. State or local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all...

33 CFR 401.102 - Civil penalty.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Civil penalty. 401.102 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Penalties-Violations of Seaway Regulations § 401.102 Civil penalty. (a) A person, as described in § 401.101(b), who violates a regulation is liable to a civil penalty of...

33 CFR 401.102 - Civil penalty.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Civil penalty. 401.102 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Penalties-Violations of Seaway Regulations § 401.102 Civil penalty. (a) A person, as described in § 401.101(b), who violates a regulation is liable to a civil penalty of...

33 CFR 401.102 - Civil penalty.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Civil penalty. 401.102 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Penalties-Violations of Seaway Regulations § 401.102 Civil penalty. (a) A person, as described in § 401.101(b), who violates a regulation is liable to a civil penalty of...

30 CFR 881.12 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil rights. 881.12 Section 881.12 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.12 Civil rights. State or local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all...

30 CFR 881.12 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil rights. 881.12 Section 881.12 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.12 Civil rights. State or local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all...

33 CFR 401.102 - Civil penalty.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Civil penalty. 401.102 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Penalties-Violations of Seaway Regulations § 401.102 Civil penalty. (a) A person, as described in § 401.101(b), who violates a regulation is liable to a civil penalty of...

30 CFR 881.12 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil rights. 881.12 Section 881.12 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.12 Civil rights. State or local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all...

33 CFR 401.102 - Civil penalty.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Civil penalty. 401.102 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Penalties-Violations of Seaway Regulations § 401.102 Civil penalty. (a) A person, as described in § 401.101(b), who violates a regulation is liable to a civil penalty of...

30 CFR 881.12 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil rights. 881.12 Section 881.12 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.12 Civil rights. State or local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all...

Automatic 3D high-fidelity traffic interchange modeling using 2D road GIS data

NASA Astrophysics Data System (ADS)

Wang, Jie; Shen, Yuzhong

2011-03-01

3D road models are widely used in many computer applications such as racing games and driving simulations. However, almost all high-fidelity 3D road models were generated manually by professional artists at the expense of intensive labor. There are very few existing methods for automatically generating 3D high-fidelity road networks, especially for those existing in the real world. Real road network contains various elements such as road segments, road intersections and traffic interchanges. Among them, traffic interchanges present the most challenges to model due to their complexity and the lack of height information (vertical position) of traffic interchanges in existing road GIS data. This paper proposes a novel approach that can automatically produce 3D high-fidelity road network models, including traffic interchange models, from real 2D road GIS data that mainly contain road centerline information. The proposed method consists of several steps. The raw road GIS data are first preprocessed to extract road network topology, merge redundant links, and classify road types. Then overlapped points in the interchanges are detected and their elevations are determined based on a set of level estimation rules. Parametric representations of the road centerlines are then generated through link segmentation and fitting, and they have the advantages of arbitrary levels of detail with reduced memory usage. Finally a set of civil engineering rules for road design (e.g., cross slope, superelevation) are selected and used to generate realistic road surfaces. In addition to traffic interchange modeling, the proposed method also applies to other more general road elements. Preliminary results show that the proposed method is highly effective and useful in many applications.

30 CFR 880.16 - Civil rights.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Civil rights. 880.16 Section 880.16 Mineral... LAND RECLAMATION MINE FIRE CONTROL § 880.16 Civil rights. State and local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all requirements imposed by or pursuant to...

31 CFR 1010.820 - Civil penalty.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Civil penalty. 1010.820 Section 1010... § 1010.820 Civil penalty. (a) For any willful violation, committed on or before October 12, 1984, of any... participates in the violation, a civil penalty not to exceed $1,000. (b) For any willful violation committed...

31 CFR 1010.820 - Civil penalty.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Civil penalty. 1010.820 Section 1010... § 1010.820 Civil penalty. (a) For any willful violation, committed on or before October 12, 1984, of any... participates in the violation, a civil penalty not to exceed $1,000. (b) For any willful violation committed...

31 CFR 1010.820 - Civil penalty.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Civil penalty. 1010.820 Section 1010... § 1010.820 Civil penalty. (a) For any willful violation, committed on or before October 12, 1984, of any... participates in the violation, a civil penalty not to exceed $1,000. (b) For any willful violation committed...

30 CFR 880.16 - Civil rights.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Civil rights. 880.16 Section 880.16 Mineral... LAND RECLAMATION MINE FIRE CONTROL § 880.16 Civil rights. State and local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all requirements imposed by or pursuant to...

30 CFR 880.16 - Civil rights.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Civil rights. 880.16 Section 880.16 Mineral... LAND RECLAMATION MINE FIRE CONTROL § 880.16 Civil rights. State and local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all requirements imposed by or pursuant to...

30 CFR 880.16 - Civil rights.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Civil rights. 880.16 Section 880.16 Mineral... LAND RECLAMATION MINE FIRE CONTROL § 880.16 Civil rights. State and local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all requirements imposed by or pursuant to...

30 CFR 880.16 - Civil rights.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Civil rights. 880.16 Section 880.16 Mineral... LAND RECLAMATION MINE FIRE CONTROL § 880.16 Civil rights. State and local authorities shall comply with Title VI of the Civil Rights Act of 1964 (Pub. L. 88-352) and all requirements imposed by or pursuant to...

31 CFR 1010.820 - Civil penalty.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Civil penalty. 1010.820 Section 1010... § 1010.820 Civil penalty. (a) For any willful violation, committed on or before October 12, 1984, of any... participates in the violation, a civil penalty not to exceed $1,000. (b) For any willful violation committed...

15 CFR 904.106 - Compromise of civil penalty.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Compromise of civil penalty. 904.106...) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS CIVIL PROCEDURES Civil Penalties § 904.106 Compromise of civil penalty. (a) NOAA, in its sole discretion, may...

49 CFR 190.235 - Civil actions generally.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Civil actions generally. 190.235 Section 190.235... PROCEDURES Enforcement Specific Relief § 190.235 Civil actions generally. Whenever it appears to the... or appropriate, including mandatory or prohibitive injunctive relief, interim equitable relief, civil...

Semiannual Report to Congress on the Effectiveness of the Civil Aviation Security Program.

DTIC Science & Technology

1983-10-21

Aviation Security Program -s fro January 1 -June 30, 1983 c> CD C_3 LU DTIC ELECTE NOV 1 8 1983 D <sS^ B Washington, O.C. 20691 October...Effectiveness of the Civil Aviation Security Program 7. A-.W.) Aviation Security Division V. P»tf»m..»» 0>|fi •« Nam» «n4 Aa^rai» DOT/Federal...Aviation Administration Office of Civil Aviation Security 800 Independence Avenue, SW. Washington, P.C. 20591 1. ••€•*.»•<•’• Caiala*. Na. S.

7 CFR 400.454 - Disqualification and civil fines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Disqualification and civil fines. 400.454 Section 400...-Compliance § 400.454 Disqualification and civil fines. (a) Before any disqualification or civil fine is.... (3) Disqualification and civil fines may only be imposed if a preponderance of the evidence shows...

42 CFR 493.1834 - Civil money penalty.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 5 2014-10-01 2014-10-01 false Civil money penalty. 493.1834 Section 493.1834... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1834 Civil money... Secretary to impose civil money penalties on laboratories. Section 1846(b)(3) of the Act specifically...

42 CFR 493.1834 - Civil money penalty.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Civil money penalty. 493.1834 Section 493.1834... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1834 Civil money... Secretary to impose civil money penalties on laboratories. Section 1846(b)(3) of the Act specifically...

42 CFR 493.1834 - Civil money penalty.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Civil money penalty. 493.1834 Section 493.1834... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1834 Civil money... Secretary to impose civil money penalties on laboratories. Section 1846(b)(3) of the Act specifically...

42 CFR 493.1834 - Civil money penalty.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 5 2012-10-01 2012-10-01 false Civil money penalty. 493.1834 Section 493.1834... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1834 Civil money... Secretary to impose civil money penalties on laboratories. Section 1846(b)(3) of the Act specifically...

42 CFR 493.1834 - Civil money penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Civil money penalty. 493.1834 Section 493.1834... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1834 Civil money... Secretary to impose civil money penalties on laboratories. Section 1846(b)(3) of the Act specifically...

14 CFR 91.219 - Altitude alerting system or device: Turbojet-powered civil airplanes.

Code of Federal Regulations, 2010 CFR

2010-01-01

...: Turbojet-powered civil airplanes. 91.219 Section 91.219 Aeronautics and Space FEDERAL AVIATION... system or device: Turbojet-powered civil airplanes. (a) Except as provided in paragraph (d) of this section, no person may operate a turbojet-powered U.S.-registered civil airplane unless that airplane is...

14 CFR 91.219 - Altitude alerting system or device: Turbojet-powered civil airplanes.

Code of Federal Regulations, 2013 CFR

2013-01-01

...: Turbojet-powered civil airplanes. 91.219 Section 91.219 Aeronautics and Space FEDERAL AVIATION... system or device: Turbojet-powered civil airplanes. (a) Except as provided in paragraph (d) of this section, no person may operate a turbojet-powered U.S.-registered civil airplane unless that airplane is...

14 CFR 91.219 - Altitude alerting system or device: Turbojet-powered civil airplanes.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: Turbojet-powered civil airplanes. 91.219 Section 91.219 Aeronautics and Space FEDERAL AVIATION... system or device: Turbojet-powered civil airplanes. (a) Except as provided in paragraph (d) of this section, no person may operate a turbojet-powered U.S.-registered civil airplane unless that airplane is...

14 CFR 91.219 - Altitude alerting system or device: Turbojet-powered civil airplanes.

Code of Federal Regulations, 2012 CFR

2012-01-01

...: Turbojet-powered civil airplanes. 91.219 Section 91.219 Aeronautics and Space FEDERAL AVIATION... system or device: Turbojet-powered civil airplanes. (a) Except as provided in paragraph (d) of this section, no person may operate a turbojet-powered U.S.-registered civil airplane unless that airplane is...

14 CFR 91.219 - Altitude alerting system or device: Turbojet-powered civil airplanes.

Code of Federal Regulations, 2014 CFR

2014-01-01

...: Turbojet-powered civil airplanes. 91.219 Section 91.219 Aeronautics and Space FEDERAL AVIATION... system or device: Turbojet-powered civil airplanes. (a) Except as provided in paragraph (d) of this section, no person may operate a turbojet-powered U.S.-registered civil airplane unless that airplane is...

Inquiry-Based Civil Discourse Education

ERIC Educational Resources Information Center

Linvill, Darren L.; Pyle, Andrew S.

2017-01-01

Course: Civil discourse, argumentation, debate, persuasion, political communication. Objectives: This unit activity will help students build an understanding of civil discourse and its function in society. Students will: (1) increase their capacity to examine arguments critically, (2) enhance their own ability to self-reflect critically, and (3)…

42 CFR 423.756 - Procedures for imposing intermediate sanctions and civil money penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... civil money penalties. 423.756 Section 423.756 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... BENEFIT Intermediate Sanctions § 423.756 Procedures for imposing intermediate sanctions and civil money....509. (e) Notice to impose civil money penalties—(1) CMS notice to OIG. If CMS determines that a Part D...

29 CFR 501.19 - Civil money penalty assessment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalty assessment. 501.19 Section 501.19 Labor... IMMIGRATION AND NATIONALITY ACT Enforcement § 501.19 Civil money penalty assessment. (a) A civil money penalty... workers. (c) A civil money penalty for each violation of the work contract or a requirement of 8 U.S.C...

32 CFR Appendix D to Part 505 - Exemptions; Exceptions; and DoD Blanket Routine Uses

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Exemptions; Exceptions; and DoD Blanket Routine Uses D Appendix D to Part 505 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. D Appendix D to...

32 CFR Appendix D to Part 505 - Exemptions; Exceptions; and DoD Blanket Routine Uses

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 3 2011-07-01 2009-07-01 true Exemptions; Exceptions; and DoD Blanket Routine Uses D Appendix D to Part 505 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. D Appendix D to...

Civil Protection issues in urban management of natural hazards

NASA Astrophysics Data System (ADS)

Bostenaru, Maria; Georgescu, Sever; Goretti, Agostino; Markus, Michael

2010-05-01

between urban planning specialists and specialists in vulnerability studies at the Civil Protection in order to enhance the role of urban planning in disaster mitigation, - collaboration of the Italian Civil Protection with Romania with the National Institute for Building Research, the scientific director and EAEE representative, within the STEP project, on post-earthquake safety assessment, in l'Aquila, before and after the earthquake. This collaboration continued with invitation to the Global Earthquake Model Outreach Meeting of the Scientific Director, supported by the Italian Civil Protection as public participant, and to which we hope to be able to contribute, given the background in socio-economic aspects of the author (research topics in Karlsruhe) and the possibilities of dissemination of results on risks. More recently a training school in the framework of the COST action TU0801 "Semantic enrichment of 3D city models for sustainable urban development" on 3D for natural disaster management brought the author in contact with similar authorities from the Netherlands. More even, she has information first hand about the training held by the Hungarian Civil Protection with school children, where a further collaboration is envisaged. The lessons learned from these experiences are important because recently the author was invited to collaborate with the Centre for Emergency Architecture of the "Ion Mincu" University of Architecture and Urbanism. Emergency interventions are the field where collaboration with the Civil protection is required. In frame of the collaboration she is co-teaching a course on "Risks", from both natural and anthropic hazards. Especially the inclusion of the lessons from l'Aquila was discussed with the specialists mentioned above, but also the way the risk mapping can be done. Thus the lessons from scientific collaboration can be included in the teaching process.

PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Performance potential of an advanced technology Mach 3 turbojet engine installed on a conceptual high-speed civil transport

NASA Technical Reports Server (NTRS)

Morris, Shelby J., Jr.; Geiselhart, Karl A.; Coen, Peter G.

1989-01-01

The performance of an advanced technology conceptual turbojet optimized for a high-speed civil aircraft is presented. This information represents an estimate of performance of a Mach 3 Brayton (gas turbine) cycle engine optimized for minimum fuel burned at supersonic cruise. This conceptual engine had no noise or environmental constraints imposed upon it. The purpose of this data is to define an upper boundary on the propulsion performance for a conceptual commercial Mach 3 transport design. A comparison is presented demonstrating the impact of the technology proposed for this conceptual engine on the weight and other characteristics of a proposed high-speed civil transport. This comparison indicates that the advanced technology turbojet described could reduce the gross weight of a hypothetical Mach 3 high-speed civil transport design from about 714,000 pounds to about 545,000 pounds. The aircraft with the baseline engine and the aircraft with the advanced technology engine are described.

42 CFR 423.756 - Procedures for imposing intermediate sanctions and civil money penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... civil money penalties. 423.756 Section 423.756 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... civil money penalties. (a) Notice of intermediate sanction and opportunity to respond—(1) Notice of....509. (e) Notice to impose civil money penalties—(1) CMS notice to OIG. If CMS determines that a Part D...

Social impacts of civil aviation and implications for R and D policy

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1971-01-01

An attempt was made to identify social impacts, both beneficial and detrimental, which would or could flow from the introduction of advanced civil aviation systems. A broad range of social impact areas was investigated which included economic, environmental, political, sociological, psychological, legal, and urban/regional developmental factors. Data are arranged into two major parts. In the first part, a series of Major Policy Issues are identified and discussed which appear, on the basis of the social impact study, to merit serious consideration. The discussion of each "Issue' is presented both to explain its relevance and to raise considerations which will bear on its satisfactory resolution. The second part views the same overall body of information in a different manner: a series of "Findings' are pointed out from which more concrete guidance for R and D policy can be derived, and a set of "Candidate Basic Federal Undertakings' thus derived are presented.

Novel eye-safe line scanning 3D laser-radar

NASA Astrophysics Data System (ADS)

Eberle, B.; Kern, Tobias; Hammer, Marcus; Schwanke, Ullrich; Nowak, Heinrich

2014-10-01

Today, the civil market provides quite a number of different 3D-Sensors covering ranges up to 1 km. Typically these sensors are based on single element detectors which suffer from the drawback of spatial resolution at larger distances. Tasks demanding reliable object classification at long ranges can be fulfilled only by sensors consisting of detector arrays. They ensure sufficient frame rates and high spatial resolution. Worldwide there are many efforts in developing 3D-detectors, based on two-dimensional arrays. This paper presents first results on the performance of a recently developed 3D imaging laser radar sensor, working in the short wave infrared (SWIR) at 1.5 μm. It consists of a novel Cadmium Mercury Telluride (CMT) linear array APD detector with 384x1 elements at a pitch of 25 μm, developed by AIM Infrarot Module GmbH. The APD elements are designed to work in the linear (non-Geiger) mode. Each pixel will provide the time of flight measurement, and, due to the linear detection mode, allowing the detection of three successive echoes. The resolution in depth is 15 cm, the maximum repetition rate is 4 kHz. We discuss various sensor concepts regarding possible applications and their dependence on system parameters like field of view, frame rate, spatial resolution and range of operation.

Case study: Beauty and the Beast 3D: benefits of 3D viewing for 2D to 3D conversion

NASA Astrophysics Data System (ADS)

Handy Turner, Tara

2010-02-01

From the earliest stages of the Beauty and the Beast 3D conversion project, the advantages of accurate desk-side 3D viewing was evident. While designing and testing the 2D to 3D conversion process, the engineering team at Walt Disney Animation Studios proposed a 3D viewing configuration that not only allowed artists to "compose" stereoscopic 3D but also improved efficiency by allowing artists to instantly detect which image features were essential to the stereoscopic appeal of a shot and which features had minimal or even negative impact. At a time when few commercial 3D monitors were available and few software packages provided 3D desk-side output, the team designed their own prototype devices and collaborated with vendors to create a "3D composing" workstation. This paper outlines the display technologies explored, final choices made for Beauty and the Beast 3D, wish-lists for future development and a few rules of thumb for composing compelling 2D to 3D conversions.

42 CFR 3.408 - Factors considered in determining the amount of a civil money penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Factors considered in determining the amount of a civil money penalty. 3.408 Section 3.408 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT...

FastScript3D - A Companion to Java 3D

NASA Technical Reports Server (NTRS)

Koenig, Patti

2005-01-01

FastScript3D is a computer program, written in the Java 3D(TM) programming language, that establishes an alternative language that helps users who lack expertise in Java 3D to use Java 3D for constructing three-dimensional (3D)-appearing graphics. The FastScript3D language provides a set of simple, intuitive, one-line text-string commands for creating, controlling, and animating 3D models. The first word in a string is the name of a command; the rest of the string contains the data arguments for the command. The commands can also be used as an aid to learning Java 3D. Developers can extend the language by adding custom text-string commands. The commands can define new 3D objects or load representations of 3D objects from files in formats compatible with such other software systems as X3D. The text strings can be easily integrated into other languages. FastScript3D facilitates communication between scripting languages [which enable programming of hyper-text markup language (HTML) documents to interact with users] and Java 3D. The FastScript3D language can be extended and customized on both the scripting side and the Java 3D side.

Shock-driven fluid-structure interaction for civil design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, Stephen L; Deiterding, Ralf

The multiphysics fluid-structure interaction simulation of shock-loaded structures requires the dynamic coupling of a shock-capturing flow solver to a solid mechanics solver for large deformations. The Virtual Test Facility combines a Cartesian embedded boundary approach with dynamic mesh adaptation in a generic software framework of flow solvers using hydrodynamic finite volume upwind schemes that are coupled to various explicit finite element solid dynamics solvers (Deiterding et al., 2006). This paper gives a brief overview of the computational approach and presents first simulations that utilize the general purpose solid dynamics code DYNA3D for complex 3D structures of interest in civil engineering.more » Results from simulations of a reinforced column, highway bridge, multistory building, and nuclear reactor building are presented.« less

Refined 3d-3d correspondence

NASA Astrophysics Data System (ADS)

Alday, Luis F.; Genolini, Pietro Benetti; Bullimore, Mathew; van Loon, Mark

2017-04-01

We explore aspects of the correspondence between Seifert 3-manifolds and 3d N = 2 supersymmetric theories with a distinguished abelian flavour symmetry. We give a prescription for computing the squashed three-sphere partition functions of such 3d N = 2 theories constructed from boundary conditions and interfaces in a 4d N = 2∗ theory, mirroring the construction of Seifert manifold invariants via Dehn surgery. This is extended to include links in the Seifert manifold by the insertion of supersymmetric Wilson-'t Hooft loops in the 4d N = 2∗ theory. In the presence of a mass parameter cfor the distinguished flavour symmetry, we recover aspects of refined Chern-Simons theory with complex gauge group, and in particular construct an analytic continuation of the S-matrix of refined Chern-Simons theory.

FRACOR-software toolbox for deterministic mapping of fracture corridors in oil fields on AutoCAD platform

NASA Astrophysics Data System (ADS)

Ozkaya, Sait I.

2018-03-01

Fracture corridors are interconnected large fractures in a narrow sub vertical tabular array, which usually traverse entire reservoir vertically and extended for several hundreds of meters laterally. Fracture corridors with their huge conductivities constitute an important element of many fractured reservoirs. Unlike small diffuse fractures, actual fracture corridors must be mapped deterministically for simulation or field development purposes. Fracture corridors can be identified and quantified definitely with borehole image logs and well testing. However, there are rarely sufficient image logs or well tests, and it is necessary to utilize various fracture corridor indicators with varying degrees of reliability. Integration of data from many different sources, in turn, requires a platform with powerful editing and layering capability. Available commercial reservoir characterization software packages, with layering and editing capabilities, can be cost intensive. CAD packages are far more affordable and may easily acquire the versatility and power of commercial software packages with addition of a small software toolbox. The objective of this communication is to present FRACOR, a software toolbox which enables deterministic 2D fracture corridor mapping and modeling on AutoCAD platform. The FRACOR toolbox is written in AutoLISPand contains several independent routines to import and integrate available fracture corridor data from an oil field, and export results as text files. The resulting fracture corridor maps consists mainly of fracture corridors with different confidence levels from combination of static and dynamic data and exclusion zones where no fracture corridor can exist. The exported text file of fracture corridors from FRACOR can be imported into an upscaling programs to generate fracture grid for dual porosity simulation or used for field development and well planning.

15 CFR 904.108 - Factors considered in assessing civil penalties.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS CIVIL PROCEDURES Civil Penalties § 904.108 Factors considered in assessing civil penalties. (a) Factors to be taken into account in assessing a civil penalty, depending upon the statute in question, may... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Factors considered in assessing civil...

11 CFR 111.39 - When must the respondent pay the civil money penalty?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 11 Federal Elections 1 2011-01-01 2011-01-01 false When must the respondent pay the civil money... (2 U.S.C. 437g, 437d(a)) Administrative Fines § 111.39 When must the respondent pay the civil money... States, the respondent must remit payment of the civil money penalty within thirty (30) days of receipt...

11 CFR 111.39 - When must the respondent pay the civil money penalty?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 11 Federal Elections 1 2012-01-01 2012-01-01 false When must the respondent pay the civil money... (2 U.S.C. 437g, 437d(a)) Administrative Fines § 111.39 When must the respondent pay the civil money... States, the respondent must remit payment of the civil money penalty within thirty (30) days of receipt...

Federal Civil Rights Commitments: An Assessment of Enforcement Resources and Performance. United States Commission on Civil Rights Clearinghouse Publication 82.

ERIC Educational Resources Information Center

Commission on Civil Rights, Washington, DC.

This report reviews, in the context of their budget and staff resources, selected activities of six Federal agencies with significant responsibility for enforcing civil rights laws. They are: (1) the Department of Education's Office for Civil Rights; (2) The Department of Health and Human Services' Office for Civil Rights; (3) the Department of…

Civil Defense, U. S. A.: A Programmed Orientation to Civil Defense. Unit 5. Governmental Responsibilities for Civil Defense.

ERIC Educational Resources Information Center

Defense Civil Preparedness Agency (DOD), Battle Creek, MI.

A description of the laws and orders that provide necessary legal authorization for civil defense activities is provided. In addition, an outline of the responsibilities of all governments and the role of the private sector in civil defense is presented. Topics discussed include: (1) Legal authority for civil defense, (2) Civil defense…

YouDash3D: exploring stereoscopic 3D gaming for 3D movie theaters

NASA Astrophysics Data System (ADS)

Schild, Jonas; Seele, Sven; Masuch, Maic

2012-03-01

Along with the success of the digitally revived stereoscopic cinema, events beyond 3D movies become attractive for movie theater operators, i.e. interactive 3D games. In this paper, we present a case that explores possible challenges and solutions for interactive 3D games to be played by a movie theater audience. We analyze the setting and showcase current issues related to lighting and interaction. Our second focus is to provide gameplay mechanics that make special use of stereoscopy, especially depth-based game design. Based on these results, we present YouDash3D, a game prototype that explores public stereoscopic gameplay in a reduced kiosk setup. It features live 3D HD video stream of a professional stereo camera rig rendered in a real-time game scene. We use the effect to place the stereoscopic effigies of players into the digital game. The game showcases how stereoscopic vision can provide for a novel depth-based game mechanic. Projected trigger zones and distributed clusters of the audience video allow for easy adaptation to larger audiences and 3D movie theater gaming.

33 CFR 401.205 - Civil and criminal penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Civil and criminal penalties. 401... § 401.205 Civil and criminal penalties. (a) If the violation of the Seaway Regulations carries a... criminal proceedings shall not bar the initiation of civil penalty proceedings by the Associate...

29 CFR 530.302 - Amounts of civil money penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

29 CFR 530.302 - Amounts of civil money penalties.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

29 CFR 530.302 - Amounts of civil money penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

29 CFR 530.302 - Amounts of civil money penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

29 CFR 530.302 - Amounts of civil money penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

Viewing CAD Drawings on the Internet

ERIC Educational Resources Information Center

Schwendau, Mark

2004-01-01

Computer aided design (CAD) has been producing 3-D models for years. AutoCAD software is frequently used to create sophisticated 3-D models. These CAD files can be exported as 3DS files for import into Autodesk's 3-D Studio Viz. In this program, the user can render and modify the 3-D model before exporting it out as a WRL (world file hyperlinked)…

Integration of High-Resolution Laser Displacement Sensors and 3D Printing for Structural Health Monitoring

PubMed Central

Chang, Shu-Wei; Kuo, Shih-Yu; Huang, Ting-Hsuan

2017-01-01

This paper presents a novel experimental design for complex structural health monitoring (SHM) studies achieved by integrating 3D printing technologies, high-resolution laser displacement sensors, and multiscale entropy SHM theory. A seven-story structure with a variety of composite bracing systems was constructed using a dual-material 3D printer. A wireless Bluetooth vibration speaker was used to excite the ground floor of the structure, and high-resolution laser displacement sensors (1-μm resolution) were used to monitor the displacement history on different floors. Our results showed that the multiscale entropy SHM method could detect damage on the 3D-printed structures. The results of this study demonstrate that integrating 3D printing technologies and high-resolution laser displacement sensors enables the design of cheap, fast processing, complex, small-scale civil structures for future SHM studies. The novel experimental design proposed in this study provides a suitable platform for investigating the validity and sensitivity of SHM in different composite structures and damage conditions for real life applications in the future. PMID:29271937

Integration of High-Resolution Laser Displacement Sensors and 3D Printing for Structural Health Monitoring.

PubMed

Chang, Shu-Wei; Lin, Tzu-Kang; Kuo, Shih-Yu; Huang, Ting-Hsuan

2017-12-22

This paper presents a novel experimental design for complex structural health monitoring (SHM) studies achieved by integrating 3D printing technologies, high-resolution laser displacement sensors, and multiscale entropy SHM theory. A seven-story structure with a variety of composite bracing systems was constructed using a dual-material 3D printer. A wireless Bluetooth vibration speaker was used to excite the ground floor of the structure, and high-resolution laser displacement sensors (1-μm resolution) were used to monitor the displacement history on different floors. Our results showed that the multiscale entropy SHM method could detect damage on the 3D-printed structures. The results of this study demonstrate that integrating 3D printing technologies and high-resolution laser displacement sensors enables the design of cheap, fast processing, complex, small-scale civil structures for future SHM studies. The novel experimental design proposed in this study provides a suitable platform for investigating the validity and sensitivity of SHM in different composite structures and damage conditions for real life applications in the future.

Civil Code, 11 December 1987.

PubMed

1988-01-01

Article 162 of this Mexican Code provides, among other things, that "Every person has the right freely, responsibly, and in an informed fashion to determine the number and spacing of his or her children." When a marriage is involved, this right is to be observed by the spouses "in agreement with each other." The civil codes of the following states contain the same provisions: 1) Baja California (Art. 159 of the Civil Code of 28 April 1972 as revised in Decree No. 167 of 31 January 1974); 2) Morelos (Art. 255 of the Civil Code of 26 September 1949 as revised in Decree No. 135 of 29 December 1981); 3) Queretaro (Art. 162 of the Civil Code of 29 December 1950 as revised in the Act of 9 January 1981); 4) San Luis Potosi (Art. 147 of the Civil Code of 24 March 1946 as revised in 13 June 1978); Sinaloa (Art. 162 of the Civil Code of 18 June 1940 as revised in Decree No. 28 of 14 October 1975); 5) Tamaulipas (Art. 146 of the Civil Code of 21 November 1960 as revised in Decree No. 20 of 30 April 1975); 6) Veracruz-Llave (Art. 98 of the Civil Code of 1 September 1932 as revised in the Act of 30 December 1975); and 7) Zacatecas (Art. 253 of the Civil Code of 9 February 1965 as revised in Decree No. 104 of 13 August 1975). The Civil Codes of Puebla and Tlaxcala provide for this right only in the context of marriage with the spouses in agreement. See Art. 317 of the Civil Code of Puebla of 15 April 1985 and Article 52 of the Civil Code of Tlaxcala of 31 August 1976 as revised in Decree No. 23 of 2 April 1984. The Family Code of Hidalgo requires as a formality of marriage a certification that the spouses are aware of methods of controlling fertility, responsible parenthood, and family planning. In addition, Article 22 the Civil Code of the Federal District provides that the legal capacity of natural persons is acquired at birth and lost at death; however, from the moment of conception the individual comes under the protection of the law, which is valid with respect to the

History and Civility

ERIC Educational Resources Information Center

Schaefer, Larry

2015-01-01

Larry Schaefer's history of civility is a succinct summary of the implicit and evolving definitions of civility over 2500 years of civilization. Beginning with the Romans and the root word "civitas," meaning the rights and duties of citizenship, civility appears in classical literature as integral to the roots of democracy in the context…

3D imaging, 3D printing and 3D virtual planning in endodontics.

PubMed

Shah, Pratik; Chong, B S

2018-03-01

The adoption and adaptation of recent advances in digital technology, such as three-dimensional (3D) printed objects and haptic simulators, in dentistry have influenced teaching and/or management of cases involving implant, craniofacial, maxillofacial, orthognathic and periodontal treatments. 3D printed models and guides may help operators plan and tackle complicated non-surgical and surgical endodontic treatment and may aid skill acquisition. Haptic simulators may assist in the development of competency in endodontic procedures through the acquisition of psycho-motor skills. This review explores and discusses the potential applications of 3D printed models and guides, and haptic simulators in the teaching and management of endodontic procedures. An understanding of the pertinent technology related to the production of 3D printed objects and the operation of haptic simulators are also presented.

3d-3d correspondence revisited

NASA Astrophysics Data System (ADS)

Chung, Hee-Joong; Dimofte, Tudor; Gukov, Sergei; Sułkowski, Piotr

2016-04-01

In fivebrane compactifications on 3-manifolds, we point out the importance of all flat connections in the proper definition of the effective 3d {N}=2 theory. The Lagrangians of some theories with the desired properties can be constructed with the help of homological knot invariants that categorify colored Jones polynomials. Higgsing the full 3d theories constructed this way recovers theories found previously by Dimofte-Gaiotto-Gukov. We also consider the cutting and gluing of 3-manifolds along smooth boundaries and the role played by all flat connections in this operation.

3d-3d correspondence revisited

DOE PAGES

Chung, Hee -Joong; Dimofte, Tudor; Gukov, Sergei; ...

2016-04-21

In fivebrane compactifications on 3-manifolds, we point out the importance of all flat connections in the proper definition of the effective 3d N = 2 theory. The Lagrangians of some theories with the desired properties can be constructed with the help of homological knot invariants that categorify colored Jones polynomials. Higgsing the full 3d theories constructed this way recovers theories found previously by Dimofte-Gaiotto-Gukov. As a result, we also consider the cutting and gluing of 3-manifolds along smooth boundaries and the role played by all flat connections in this operation.

29 CFR 500.143 - Civil money penalty assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalty assessment. 500.143 Section 500.143... MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.143 Civil money penalty assessment. (a) A civil money penalty may be assessed for each violation of the Act or these regulations. (b) In...

29 CFR 500.143 - Civil money penalty assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalty assessment. 500.143 Section 500.143... MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.143 Civil money penalty assessment. (a) A civil money penalty may be assessed for each violation of the Act or these regulations. (b) In...

29 CFR 500.143 - Civil money penalty assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Civil money penalty assessment. 500.143 Section 500.143... MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.143 Civil money penalty assessment. (a) A civil money penalty may be assessed for each violation of the Act or these regulations. (b) In...

29 CFR 500.143 - Civil money penalty assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalty assessment. 500.143 Section 500.143... MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.143 Civil money penalty assessment. (a) A civil money penalty may be assessed for each violation of the Act or these regulations. (b) In...

29 CFR 500.143 - Civil money penalty assessment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalty assessment. 500.143 Section 500.143... MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.143 Civil money penalty assessment. (a) A civil money penalty may be assessed for each violation of the Act or these regulations. (b) In...

A 3d-3d appetizer

DOE PAGES

Pei, Du; Ye, Ke

2016-11-02

Here, we test the 3d-3d correspondence for theories that are labeled by Lens spaces. We find a full agreement between the index of the 3d N=2 “Lens space theory” T [L(p, 1)] and the partition function of complex Chern-Simons theory on L(p, 1). In particular, for p = 1, we show how the familiar S 3 partition function of Chern-Simons theory arises from the index of a free theory. For large p, we find that the index of T[L(p, 1)] becomes a constant independent of p. In addition, we study T[L(p, 1)] on the squashed three-sphere S b 3. Thismore » enables us to see clearly, at the level of partition function, to what extent G C complex Chern-Simons theory can be thought of as two copies of Chern-Simons theory with compact gauge group G.« less

29 CFR 801.42 - Civil money penalties-assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalties-assessment. 801.42 Section 801.42... APPLICATION OF THE EMPLOYEE POLYGRAPH PROTECTION ACT OF 1988 Enforcement § 801.42 Civil money penalties—assessment. (a) A civil money penalty in an amount not to exceed $10,000 for any violation may be assessed...

29 CFR 801.42 - Civil money penalties-assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalties-assessment. 801.42 Section 801.42... APPLICATION OF THE EMPLOYEE POLYGRAPH PROTECTION ACT OF 1988 Enforcement § 801.42 Civil money penalties—assessment. (a) A civil money penalty in an amount not to exceed $10,000 for any violation may be assessed...

29 CFR 801.42 - Civil money penalties-assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalties-assessment. 801.42 Section 801.42... APPLICATION OF THE EMPLOYEE POLYGRAPH PROTECTION ACT OF 1988 Enforcement § 801.42 Civil money penalties—assessment. (a) A civil money penalty in an amount not to exceed $10,000 for any violation may be assessed...

29 CFR 801.42 - Civil money penalties-assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Civil money penalties-assessment. 801.42 Section 801.42... APPLICATION OF THE EMPLOYEE POLYGRAPH PROTECTION ACT OF 1988 Enforcement § 801.42 Civil money penalties—assessment. (a) A civil money penalty in an amount not to exceed $10,000 for any violation may be assessed...

29 CFR 801.42 - Civil money penalties-assessment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalties-assessment. 801.42 Section 801.42... APPLICATION OF THE EMPLOYEE POLYGRAPH PROTECTION ACT OF 1988 Enforcement § 801.42 Civil money penalties—assessment. (a) A civil money penalty in an amount not to exceed $10,000 for any violation may be assessed...

36 CFR 223.196 - Civil penalties for violation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Civil penalties for violation... PRODUCTS The Forest Resources Conservation and Shortage Relief Act of 1990 Program § 223.196 Civil... person a civil penalty of not more than $500,000 for each violation, or 3 times the gross value of the...

29 CFR 502.19 - Civil money penalty assessment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalty assessment. 502.19 Section 502.19 Labor... IMMIGRATION AND NATIONALITY ACT (SUSPENDED 6-29-2009) Enforcement of Work Contracts § 502.19 Civil money penalty assessment. (a) A civil money penalty may be assessed by the Administrator, WHD for each violation...

29 CFR 501.19 - Civil money penalty assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalty assessment. 501.19 Section 501.19 Labor... IMMIGRATION AND NATIONALITY ACT Enforcement § 501.19 Civil money penalty assessment. (a) A civil money penalty... violation. (b) In determining the amount of penalty to be assessed for each violation, the WHD Administrator...

29 CFR 501.19 - Civil money penalty assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalty assessment. 501.19 Section 501.19 Labor... IMMIGRATION AND NATIONALITY ACT Enforcement § 501.19 Civil money penalty assessment. (a) A civil money penalty... violation. (b) In determining the amount of penalty to be assessed for each violation, the WHD Administrator...

29 CFR 501.19 - Civil money penalty assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalty assessment. 501.19 Section 501.19 Labor... IMMIGRATION AND NATIONALITY ACT Enforcement § 501.19 Civil money penalty assessment. (a) A civil money penalty... violation. (b) In determining the amount of penalty to be assessed for each violation, the WHD Administrator...

29 CFR 501.19 - Civil money penalty assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Civil money penalty assessment. 501.19 Section 501.19 Labor... IMMIGRATION AND NATIONALITY ACT Enforcement § 501.19 Civil money penalty assessment. (a) A civil money penalty... violation. (b) In determining the amount of penalty to be assessed for each violation, the WHD Administrator...

42 CFR 423.2340 - Compliance monitoring and civil money penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Compliance monitoring and civil money penalties... BENEFIT Medicare Coverage Gap Discount Program § 423.2340 Compliance monitoring and civil money penalties... Agreement. (b) Basis for imposing civil money penalties. CMS imposes a civil money penalty (CMP) on a...

42 CFR 423.2340 - Compliance monitoring and civil money penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Compliance monitoring and civil money penalties... BENEFIT Medicare Coverage Gap Discount Program § 423.2340 Compliance monitoring and civil money penalties... Agreement. (b) Basis for imposing civil money penalties. CMS imposes a civil money penalty (CMP) on a...

46 CFR 80.40 - Civil penalty.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Civil penalty. 80.40 Section 80.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.40 Civil penalty. For each violation of the regulations in this part, the owner, operator...

46 CFR 80.40 - Civil penalty.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Civil penalty. 80.40 Section 80.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.40 Civil penalty. For each violation of the regulations in this part, the owner, operator...

46 CFR 80.40 - Civil penalty.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Civil penalty. 80.40 Section 80.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.40 Civil penalty. For each violation of the regulations in this part, the owner, operator...

46 CFR 80.40 - Civil penalty.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Civil penalty. 80.40 Section 80.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.40 Civil penalty. For each violation of the regulations in this part, the owner, operator...

46 CFR 80.40 - Civil penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Civil penalty. 80.40 Section 80.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.40 Civil penalty. For each violation of the regulations in this part, the owner, operator...

28 CFR 104.61 - Limitation on civil actions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Limitation on civil actions. 104.61... COMPENSATION FUND OF 2001 Limitations § 104.61 Limitation on civil actions. (a) General. Section 405(c)(3)(B... to file a civil action (or be a party to an action) in any Federal or State court for damages...

28 CFR 104.61 - Limitation on civil actions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Limitation on civil actions. 104.61... COMPENSATION FUND Limitations § 104.61 Limitation on civil actions. (a) General. Section 405(c)(3)(C) of the... a civil action (or be a party to an action) in any Federal or State court for damages sustained as a...

28 CFR 104.61 - Limitation on civil actions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Limitation on civil actions. 104.61... COMPENSATION FUND OF 2001 Limitations § 104.61 Limitation on civil actions. (a) General. Section 405(c)(3)(B... to file a civil action (or be a party to an action) in any Federal or State court for damages...

Annihilation rates of 3D2(2--) and 3D3(3--) heavy quarkonia

NASA Astrophysics Data System (ADS)

Wang, Tianhong; Fu, Hui-Feng; Jiang, Yue; Li, Qiang; Wang, Guo-Li

2017-03-01

We calculate the annihilation decay rates of the 3D 2(2--) and 3D 3(3--) charmonia and bottomonia by using the instantaneous Bethe-Salpeter (BS) method. The wave functions of states with quantum numbers JPC = 2-- and 3-- are constructed. By solving the corresponding instantaneous BS equations, we obtain the mass spectra and wave functions of the quarkonia. The annihilation amplitude is written within Mandelstam formalism and the relativistic corrections are taken into account properly. This is important, especially for high excited states, since their relativistic corrections are large. The results for the 3g channel are as follows: Γ13D2(cc¯)→ggg = 9.24 keV, Γ13D3(cc¯)→ggg = 25.0 keV, Γ13D2(bb¯)→ggg = 1.87 keV and Γ13D3(bb¯)→ggg = 0.815 keV.

VISUAL3D - An EIT network on visualization of geomodels

NASA Astrophysics Data System (ADS)

Bauer, Tobias

2017-04-01

When it comes to interpretation of data and understanding of deep geological structures and bodies at different scales then modelling tools and modelling experience is vital for deep exploration. Geomodelling provides a platform for integration of different types of data, including new kinds of information (e.g., new improved measuring methods). EIT Raw Materials, initiated by the EIT (European Institute of Innovation and Technology) and funded by the European Commission, is the largest and strongest consortium in the raw materials sector worldwide. The VISUAL3D network of infrastructure is an initiative by EIT Raw Materials and aims at bringing together partners with 3D-4D-visualisation infrastructure and 3D-4D-modelling experience. The recently formed network collaboration interlinks hardware, software and expert knowledge in modelling visualization and output. A special focus will be the linking of research, education and industry and integrating multi-disciplinary data and to visualize the data in three and four dimensions. By aiding network collaborations we aim at improving the combination of geomodels with differing file formats and data characteristics. This will create an increased competency in modelling visualization and the ability to interchange and communicate models more easily. By combining knowledge and experience in geomodelling with expertise in Virtual Reality visualization partners of EIT Raw Materials but also external parties will have the possibility to visualize, analyze and validate their geomodels in immersive VR-environments. The current network combines partners from universities, research institutes, geological surveys and industry with a strong background in geological 3D-modelling and 3D visualization and comprises: Luleå University of Technology, Geological Survey of Finland, Geological Survey of Denmark and Greenland, TUBA Freiberg, Uppsala University, Geological Survey of France, RWTH Aachen, DMT, KGHM Cuprum, Boliden, Montan

3D Printing and 3D Bioprinting in Pediatrics

PubMed Central

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-01-01

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics. PMID:28952542

3D Printing and 3D Bioprinting in Pediatrics.

PubMed

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-07-13

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics.

A microfluidic device for 2D to 3D and 3D to 3D cell navigation

NASA Astrophysics Data System (ADS)

Shamloo, Amir; Amirifar, Leyla

2016-01-01

Microfluidic devices have received wide attention and shown great potential in the field of tissue engineering and regenerative medicine. Investigating cell response to various stimulations is much more accurate and comprehensive with the aid of microfluidic devices. In this study, we introduced a microfluidic device by which the matrix density as a mechanical property and the concentration profile of a biochemical factor as a chemical property could be altered. Our microfluidic device has a cell tank and a cell culture chamber to mimic both 2D to 3D and 3D to 3D migration of three types of cells. Fluid shear stress is negligible on the cells and a stable concentration gradient can be obtained by diffusion. The device was designed by a numerical simulation so that the uniformity of the concentration gradients throughout the cell culture chamber was obtained. Adult neural cells were cultured within this device and they showed different branching and axonal navigation phenotypes within varying nerve growth factor (NGF) concentration profiles. Neural stem cells were also cultured within varying collagen matrix densities while exposed to NGF concentrations and they experienced 3D to 3D collective migration. By generating vascular endothelial growth factor concentration gradients, adult human dermal microvascular endothelial cells also migrated in a 2D to 3D manner and formed a stable lumen within a specific collagen matrix density. It was observed that a minimum absolute concentration and concentration gradient were required to stimulate migration of all types of the cells. This device has the advantage of changing multiple parameters simultaneously and is expected to have wide applicability in cell studies.

Classification of extraterrestrial civilizations

NASA Astrophysics Data System (ADS)

Tang, Tong B.; Chang, Grace

1991-06-01

A scheme of classification of extraterrestrial intelligence (ETI) communities based on the scope of energy accessible to the civilization in question is proposed as an alternative to the Kardeshev (1964) scheme that includes three types of civilization, as determined by their levels of energy expenditure. The proposed scheme includes six classes: (1) a civilization that runs essentially on energy exerted by individual beings or by domesticated lower life forms, (2) harnessing of natural sources on planetary surface with artificial constructions, like water wheels and wind sails, (3) energy from fossils and fissionable isotopes, mined beneath the planet surface, (4) exploitation of nuclear fusion on a large scale, whether on the planet, in space, or from primary solar energy, (5) extensive use of antimatter for energy storage, and (6) energy from spacetime, perhaps via the action of naked singularities.

Unconventional Warfare in the American Civil War

DTIC Science & Technology

2004-06-18

Miller Thesis Title: Unconventional Warfare in the American Civil War Approved by: , Thesis Committee Chair LTC ( R ) Gregory T. Beck...M.A. , Member LTC ( R ) Richard Barbuto, Ph.D. , Consulting Faculty LTC ( R ) James B. Martin, Ph.D. Accepted this 18th day of...troops and supplies to forward areas. In official correspondence dated 26 May 1864 from Captain A. V. Barringer , Chief Quartermaster, Department of West

A 3D smoothed particle hydrodynamics model for erosional dam-break floods

NASA Astrophysics Data System (ADS)

Amicarelli, Andrea; Kocak, Bozhana; Sibilla, Stefano; Grabe, Jürgen

2017-11-01

A mesh-less smoothed particle hydrodynamics (SPH) model for bed-load transport on erosional dam-break floods is presented. This mixture model describes both the liquid phase and the solid granular material. The model is validated on the results from several experiments on erosional dam breaks. A comparison between the present model and a 2-phase SPH model for geotechnical applications (Gadget Soil; TUHH) is performed. A demonstrative 3D erosional dam break on complex topography is investigated. The present 3D mixture model is characterised by: no tuning parameter for the mixture viscosity; consistency with the Kinetic Theory of Granular Flow; ability to reproduce the evolution of the free surface and the bed-load transport layer; applicability to practical problems in civil engineering. The numerical developments of this study are represented by a new SPH scheme for bed-load transport, which is implemented in the SPH code SPHERA v.8.0 (RSE SpA), distributed as FOSS on GitHub.

5 CFR 2636.104 - Civil, disciplinary and other action.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Civil, disciplinary and other action... Provisions § 2636.104 Civil, disciplinary and other action. (a) Civil action. Except when the employee... prohibited conduct, whichever is greater. (b) Disciplinary and corrective action. An agency may initiate...

Simultaneous 3D-vibration measurement using a single laser beam device

NASA Astrophysics Data System (ADS)

Brecher, Christian; Guralnik, Alexander; Baümler, Stephan

2012-06-01

Today's commercial solutions for vibration measurement and modal analysis are 3D-scanning laser doppler vibrometers, mainly used for open surfaces in the automotive and aerospace industries and the classic three-axial accelerometers in civil engineering, for most industrial applications in manufacturing environments, and particularly for partially closed structures. This paper presents a novel measurement approach using a single laser beam device and optical reflectors to simultaneously perform 3D-dynamic measurement as well as geometry measurement of the investigated object. We show the application of this so called laser tracker for modal testing of structures on a mechanical manufacturing shop floor. A holistic measurement method is developed containing manual reflector placement, semi-automated geometric modeling of investigated objects and fully automated vibration measurement up to 1000 Hz and down to few microns amplitude. Additionally the fast set up dynamic measurement of moving objects using a tracking technique is presented that only uses the device's own functionalities and does neither require a predefined moving path of the target nor an electronic synchronization to the moving object.

31 CFR 598.706 - Judicial review of civil penalty.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Judicial review of civil penalty. 598.706 Section 598.706 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... REGULATIONS Penalties § 598.706 Judicial review of civil penalty. A civil penalty imposed pursuant to this...

31 CFR 598.706 - Judicial review of civil penalty.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Judicial review of civil penalty. 598.706 Section 598.706 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... REGULATIONS Penalties § 598.706 Judicial review of civil penalty. A civil penalty imposed pursuant to this...

31 CFR 598.706 - Judicial review of civil penalty.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Judicial review of civil penalty. 598.706 Section 598.706 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... REGULATIONS Penalties § 598.706 Judicial review of civil penalty. A civil penalty imposed pursuant to this...

31 CFR 598.706 - Judicial review of civil penalty.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Judicial review of civil penalty. 598.706 Section 598.706 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... REGULATIONS Penalties § 598.706 Judicial review of civil penalty. A civil penalty imposed pursuant to this...

31 CFR 598.706 - Judicial review of civil penalty.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Judicial review of civil penalty. 598.706 Section 598.706 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... REGULATIONS Penalties § 598.706 Judicial review of civil penalty. A civil penalty imposed pursuant to this...

Filling gaps in cultural heritage documentation by 3D photography

NASA Astrophysics Data System (ADS)

Schuhr, W.; Lee, J. D.

2015-08-01

This contribution promotes 3D photography as an important tool to obtain objective object information. Keeping mainly in mind World Heritage documentation as well as Heritage protection, it is another intention of this paper, to stimulate the interest in applications of 3D photography for professionals as well as for amateurs. In addition this is also an activity report of the international CIPA task group 3. The main part of this paper starts with "Digging the treasure of existing international 3D photography". This does not only belong to tangible but also to intangible Cultural Heritage. 3D photography clearly supports the recording, the visualization, the preservation and the restoration of architectural and archaeological objects. Therefore the use of 3D photography in C.H. should increase on an international level. The presented samples in 3D represent a voluminous, almost partly "forgotten treasure" of international archives for 3D photography. The next chapter is on "Promoting new 3D photography in Cultural Heritage". Though 3D photographs are a well-established basic photographic and photogrammetric tool, even suited to provide "near real" documentation, they are still a matter of research and improvement. Beside the use of 3D cameras even single lenses cameras are very much suited for photographic 3D documentation purposes in Cultural Heritage. Currently at the Faculty of Civil Engineering of the University of Applied Sciences Magdeburg-Stendal, low altitude aerial photography is exposed from a maximum height of 13m, using a hand hold carbon telescope rod. The use of this "huge selfie stick" is also an (international) recommendation, to expose high resolution 3D photography of monuments under expedition conditions. In addition to the carbon rod recently a captive balloon and a hexacopter UAV- platform is in use, mainly to take better synoptically (extremely low altitude, ground truth) aerial photography. Additional experiments with respect to "easy

The GB/3D Type Fossils Online Web Portal

NASA Astrophysics Data System (ADS)

McCormick, T.; Howe, M. P.

2013-12-01

fossils which can be used in education and public outreach. The audience for the web portal includes both professional paleontologists and the general public. The professional paleontologist can use the portal to discover the whereabouts of the type material for a taxon they are studying, and can use the pictures and 3d models to assess the completeness and preservation quality of the material. This may reduce or negate the need to send specimens (which are often fragile and always irreplaceable) to researchers through the post, or for researchers to make possibly long, expensive and environmentally damaging journeys to visit far-off collections. We hope that the pictures and 3d models will help to stimulate public interest in paleontology and natural history. The ability to digitally image and scan specimens in 3d enables institutions to have an archive record in case specimens are lost or destroyed by accident or warfare. Recent events in Cairo and Baghdad remind us that museum collections are vulnerable to civil and military strife.

RAG-3D: A search tool for RNA 3D substructures

DOE PAGES

Zahran, Mai; Sevim Bayrak, Cigdem; Elmetwaly, Shereef; ...

2015-08-24

In this study, to address many challenges in RNA structure/function prediction, the characterization of RNA's modular architectural units is required. Using the RNA-As-Graphs (RAG) database, we have previously explored the existence of secondary structure (2D) submotifs within larger RNA structures. Here we present RAG-3D—a dataset of RNA tertiary (3D) structures and substructures plus a web-based search tool—designed to exploit graph representations of RNAs for the goal of searching for similar 3D structural fragments. The objects in RAG-3D consist of 3D structures translated into 3D graphs, cataloged based on the connectivity between their secondary structure elements. Each graph is additionally describedmore » in terms of its subgraph building blocks. The RAG-3D search tool then compares a query RNA 3D structure to those in the database to obtain structurally similar structures and substructures. This comparison reveals conserved 3D RNA features and thus may suggest functional connections. Though RNA search programs based on similarity in sequence, 2D, and/or 3D structural elements are available, our graph-based search tool may be advantageous for illuminating similarities that are not obvious; using motifs rather than sequence space also reduces search times considerably. Ultimately, such substructuring could be useful for RNA 3D structure prediction, structure/function inference and inverse folding.« less

RAG-3D: a search tool for RNA 3D substructures

PubMed Central

Zahran, Mai; Sevim Bayrak, Cigdem; Elmetwaly, Shereef; Schlick, Tamar

2015-01-01

To address many challenges in RNA structure/function prediction, the characterization of RNA's modular architectural units is required. Using the RNA-As-Graphs (RAG) database, we have previously explored the existence of secondary structure (2D) submotifs within larger RNA structures. Here we present RAG-3D—a dataset of RNA tertiary (3D) structures and substructures plus a web-based search tool—designed to exploit graph representations of RNAs for the goal of searching for similar 3D structural fragments. The objects in RAG-3D consist of 3D structures translated into 3D graphs, cataloged based on the connectivity between their secondary structure elements. Each graph is additionally described in terms of its subgraph building blocks. The RAG-3D search tool then compares a query RNA 3D structure to those in the database to obtain structurally similar structures and substructures. This comparison reveals conserved 3D RNA features and thus may suggest functional connections. Though RNA search programs based on similarity in sequence, 2D, and/or 3D structural elements are available, our graph-based search tool may be advantageous for illuminating similarities that are not obvious; using motifs rather than sequence space also reduces search times considerably. Ultimately, such substructuring could be useful for RNA 3D structure prediction, structure/function inference and inverse folding. PMID:26304547

RAG-3D: A search tool for RNA 3D substructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zahran, Mai; Sevim Bayrak, Cigdem; Elmetwaly, Shereef

In this study, to address many challenges in RNA structure/function prediction, the characterization of RNA's modular architectural units is required. Using the RNA-As-Graphs (RAG) database, we have previously explored the existence of secondary structure (2D) submotifs within larger RNA structures. Here we present RAG-3D—a dataset of RNA tertiary (3D) structures and substructures plus a web-based search tool—designed to exploit graph representations of RNAs for the goal of searching for similar 3D structural fragments. The objects in RAG-3D consist of 3D structures translated into 3D graphs, cataloged based on the connectivity between their secondary structure elements. Each graph is additionally describedmore » in terms of its subgraph building blocks. The RAG-3D search tool then compares a query RNA 3D structure to those in the database to obtain structurally similar structures and substructures. This comparison reveals conserved 3D RNA features and thus may suggest functional connections. Though RNA search programs based on similarity in sequence, 2D, and/or 3D structural elements are available, our graph-based search tool may be advantageous for illuminating similarities that are not obvious; using motifs rather than sequence space also reduces search times considerably. Ultimately, such substructuring could be useful for RNA 3D structure prediction, structure/function inference and inverse folding.« less

30 CFR 937.846 - Individual civil penalties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Individual civil penalties. 937.846 Section 937.846 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.846 Individual civil...

30 CFR 937.846 - Individual civil penalties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Individual civil penalties. 937.846 Section 937.846 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.846 Individual civil...

30 CFR 937.846 - Individual civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Individual civil penalties. 937.846 Section 937.846 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.846 Individual civil...

30 CFR 937.846 - Individual civil penalties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Individual civil penalties. 937.846 Section 937.846 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.846 Individual civil...

30 CFR 912.846 - Individual civil penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Individual civil penalties. 912.846 Section 912.846 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE IDAHO § 912.846 Individual civil...

3D Monitoring under the Keciova Mosque (Casbah-Algier, Algeria) with Ground Penetrating Radar Method

NASA Astrophysics Data System (ADS)

Kadioglu, Selma; Kagan Kadioglu, Yusuf; Deniz, Kiymet; Akin Akyol, Ali

2014-05-01

Keciova (Ketchaoua) Mosque, in Casbah-Algiers, the capital of Algeria, is a UNESCO World Heritage Site. Keciova Mosque was originally built in 1612 by the Ottoman Empire. A RAMAC CU II GPR system and a 250 MHz shielded antenna have been employed inside of the Mosque including the Cathedral and inside of the burial chambers under the Cathedral Site on parallel profiles spaced approximately 0.30 m apart to measure data. After applying standard two-dimensional (2D) and three dimensional (3D) imaging techniques, transparent 3D imaging techniques have been used to photograph the foundational infrastructures, buried remains and safety problems of the Mosque. The results showed that we obtained 3D GPR visualization until 12.0 m in depth. Firstly we imaged the base floor including corridors. Then we monitored buried remains under the first ground level between 5.0-7.0 m in depths. Finally we indicated 3D GPR photographs a spectacular protected buried old mosque structures under the second ground level between 9.0-12.0 m in depths. This project has been supported by Republic of Turkey Prime Ministry Turkish Cooperation and Coordination Agency (TIKA). This study is a contribution to the EU funded COST action TU1208, "Civil Engineering Applications of Ground penetrating Radar".

[Relationships of positive and negative affectivity to sleep quality in Japanese civil servants: 3-year follow-up study].

PubMed

Saeki, Urara; Nasermoaddeli, Ali; Sekine, Michikazu; Kagamimori, Sadanobu

2008-11-01

We conducted this longitudinal study to evaluate the relationships of positive and negative affectivity (Affect Balance Scale) to sleep quality among civil servants. For this study we evaluated 827 civil servants of T city in Toyama prefecture in the springs of 2001 (Baseline) and 2004 with complete information in both phases of the study. Based on the median score at each phase, we divided Affect Balance Scale (ABS) scores into high and low groups. We conducted logistic regression analysis to determine the odds ratios (OR) of 3-yr follow-up sleep quality by baseline and follow-up ABS scores. After adjusting for baseline sleep quality scores, age, sex, employment, job strain, and exercise habits, participants who had high ABS scores were more likely (OR: 3.13, 95% confidence interval (CI): 1.78-5.53) to have better sleep quality than those with low ABS scores at both phases. In addition, participants with low ABS scores at baseline and high ABS scores 3 yr later had better sleep quality (OR: 1.81, 95%CI: 1.02-3.20) than those with low ABS scores at both phases. These findings substantiate the relationships of positive and negative affectivity to sleep quality. Improving the affect balance condition as well as maintaining good affect balance condition may be important determinants of sleep quality in civil servants.

MRS3D: 3D Spherical Wavelet Transform on the Sphere

NASA Astrophysics Data System (ADS)

Lanusse, F.; Rassat, A.; Starck, J.-L.

2011-12-01

Future cosmological surveys will provide 3D large scale structure maps with large sky coverage, for which a 3D Spherical Fourier-Bessel (SFB) analysis is natural. Wavelets are particularly well-suited to the analysis and denoising of cosmological data, but a spherical 3D isotropic wavelet transform does not currently exist to analyse spherical 3D data. We present a new fast Discrete Spherical Fourier-Bessel Transform (DSFBT) based on both a discrete Bessel Transform and the HEALPIX angular pixelisation scheme. We tested the 3D wavelet transform and as a toy-application, applied a denoising algorithm in wavelet space to the Virgo large box cosmological simulations and found we can successfully remove noise without much loss to the large scale structure. The new spherical 3D isotropic wavelet transform, called MRS3D, is ideally suited to analysing and denoising future 3D spherical cosmological surveys; it uses a novel discrete spherical Fourier-Bessel Transform. MRS3D is based on two packages, IDL and Healpix and can be used only if these two packages have been installed.

3D Volume Rendering and 3D Printing (Additive Manufacturing).

PubMed

Katkar, Rujuta A; Taft, Robert M; Grant, Gerald T

2018-07-01

Three-dimensional (3D) volume-rendered images allow 3D insight into the anatomy, facilitating surgical treatment planning and teaching. 3D printing, additive manufacturing, and rapid prototyping techniques are being used with satisfactory accuracy, mostly for diagnosis and surgical planning, followed by direct manufacture of implantable devices. The major limitation is the time and money spent generating 3D objects. Printer type, material, and build thickness are known to influence the accuracy of printed models. In implant dentistry, the use of 3D-printed surgical guides is strongly recommended to facilitate planning and reduce risk of operative complications. Copyright © 2018 Elsevier Inc. All rights reserved.

Crash-resistant fuel system effectiveness in civil helicopter crashes.

PubMed

Hayden, Mark S; Shanahan, Dennis F; Chen, Li-Hui; Baker, Susan P

2005-08-01

Crash-resistant fuel systems (CRFS) have demonstrated close to 100% effectiveness in survivable crashes of Army helicopters, but the technology has been slow to transfer into the civil helicopter arena. Federal standards for civil helicopter CRFS are less stringent than those for military helicopters. A reduction in standards for CRFS in military helicopters is being considered. The goal of this study was to determine whether crashes of civil helicopters with CRFS are less likely to result in post-crash fire than crashes of those without. Crashes of civil helicopters during 1982-2004 were analyzed, comparing Bell 206 helicopters manufactured with CRFS with Aerospatial 350 helicopters manufactured during the same period (post-1981), but lacking CRFS. Bell 206 helicopters with CRFS were also compared with earlier models without CRFS. The highest proportion of crashes with post-crash fires (11.3%) was in AS-350s manufactured after 1981 (non-CRFS), and the lowest (3.7%) was in Bell 206s (with CRFS) [unadjusted risk ratio (RR) = 3.3, 95% confidence interval (CI) = 1.04, 10.50; adjusted for light and weather, RR = 2.81, Cl = 0.82, 9.69]. Earlier models of Bell 206s without CRFS had higher risk of post-crash fire than post-1981 models with CRFS (7.4% vs. 3.7%; adjusted RR = 2.11, Cl = 0.82, 5.45). The results of this study suggest a better performance, in terms of post-crash fire prevention, of CRFS-equipped civil helicopters as compared with those without CRFS. It is possible that CRFS in civil helicopters have not achieved the same degree of effectiveness as CRFS in military helicopters. CRFS should be used more widely in civil helicopters. The more stringent CRFS requirements for military helicopters should not be reduced without further research.

Current Obstacles to Fully Preparing Title 10 Forces for Homeland Defense and Civil Support

DTIC Science & Technology

2008-05-11

to its forces. These include DODD 3025.15, Military Assistance to Civil Authorities ( MACA ), which governs all DoD military assistance INCONUS. This...three major operational areas: Military Assistance to Civil Authorities ( MACA ), Military Support to Civilian Law Enforcement Agencies (MSCLEA) and

Visualization and manipulating the image of a formal data structure (FDS)-based database

NASA Astrophysics Data System (ADS)

Verdiesen, Franc; de Hoop, Sylvia; Molenaar, Martien

1994-08-01

A vector map is a terrain representation with a vector-structured geometry. Molenaar formulated an object-oriented formal data structure for 3D single valued vector maps. This FDS is implemented in a database (Oracle). In this study we describe a methodology for visualizing a FDS-based database and manipulating the image. A data set retrieved by querying the database is converted into an import file for a drawing application. An objective of this study is that an end-user can alter and add terrain objects in the image. The drawing application creates an export file, that is compared with the import file. Differences between these files result in updating the database which involves checks on consistency. In this study Autocad is used for visualizing and manipulating the image of the data set. A computer program has been written for the data exchange and conversion between Oracle and Autocad. The data structure of the FDS is compared to the data structure of Autocad and the data of the FDS is converted into the structure of Autocad equal to the FDS.

PLOT3D/AMES, SGI IRIS VERSION (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, SGI IRIS VERSION (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Acute D2/D3 dopaminergic agonism but chronic D2/D3 antagonism prevents NMDA antagonist neurotoxicity.

PubMed

Farber, Nuri B; Nemmers, Brian; Noguchi, Kevin K

2006-09-15

Antagonists of the N-methyl-D-aspartate (NMDA) glutamate receptor, most likely by producing disinhibtion in complex circuits, acutely produce psychosis and cognitive disturbances in humans, and neurotoxicity in rodents. Studies examining NMDA Receptor Hypofunction (NRHypo) neurotoxicity in animals, therefore, may provide insights into the pathophysiology of psychotic disorders. Dopaminergic D2 and/or D3 agents can modify psychosis over days to weeks, suggesting involvement of these transmitter system(s). We studied the ability of D2/D3 agonists and antagonists to modify NRHypo neurotoxicity both after a one-time acute exposure and after chronic daily exposure. Here we report that D2/D3 dopamine agonists, probably via D3 receptors, prevent NRHypo neurotoxicity when given acutely. The protective effect with D2/D3 agonists is not seen after chronic daily dosing. In contrast, the antipsychotic haloperidol does not affect NRHypo neurotoxicity when given acutely at D2/D3 doses. However, after chronic daily dosing of 1, 3, or 5 weeks, haloperidol does prevent NRHypo neurotoxicity with longer durations producing greater protection. Understanding the changes that occur in the NRHypo circuit after chronic exposure to dopaminergic agents could provide important clues into the pathophysiology of psychotic disorders.

Perception of 3D spatial relations for 3D displays

NASA Astrophysics Data System (ADS)

Rosen, Paul; Pizlo, Zygmunt; Hoffmann, Christoph; Popescu, Voicu S.

2004-05-01

We test perception of 3D spatial relations in 3D images rendered by a 3D display (Perspecta from Actuality Systems) and compare it to that of a high-resolution flat panel display. 3D images provide the observer with such depth cues as motion parallax and binocular disparity. Our 3D display is a device that renders a 3D image by displaying, in rapid succession, radial slices through the scene on a rotating screen. The image is contained in a glass globe and can be viewed from virtually any direction. In the psychophysical experiment several families of 3D objects are used as stimuli: primitive shapes (cylinders and cuboids), and complex objects (multi-story buildings, cars, and pieces of furniture). Each object has at least one plane of symmetry. On each trial an object or its "distorted" version is shown at an arbitrary orientation. The distortion is produced by stretching an object in a random direction by 40%. This distortion must eliminate the symmetry of an object. The subject's task is to decide whether or not the presented object is distorted under several viewing conditions (monocular/binocular, with/without motion parallax, and near/far). The subject's performance is measured by the discriminability d', which is a conventional dependent variable in signal detection experiments.

Principles of Mission Command Applied to Civil Military Relationships

DTIC Science & Technology

2017-05-25

to prevent tension and promote cohesive teams. While historians trace civil-military theory to Sun Tzu and Carl von Clausewitz, the beginning of...Conclusion – A Mission Command Approach .............................................................................. 34 Bibliography ...Civil-Military Relations,” Monograph, (School of Advanced Military Studies, Fort Leavenworth, KS, 2010): 3. 64 Bennett, 3. 36 Bibliography

Understanding the Civil Justice System.

ERIC Educational Resources Information Center

Hirshon, Robert E.; Bolduan, Linda M.

1997-01-01

Provides a concise and informative overview of the civil justice system. Examines various components and issues including the federal and state court systems, differences between civil and criminal law, background in common law, types of civil law, civil procedure, and the effect and implementation of civil law in everyday life. (MJP)

Characterizing 3D sensors using the 3D modulation transfer function

NASA Astrophysics Data System (ADS)

Kellner, Timo; Breitbarth, Andreas; Zhang, Chen; Notni, Gunther

2018-03-01

The fields of optical 3D measurement system applications are continuously expanding and becoming more and more diverse. To evaluate appropriate systems for various measurement tasks, comparable parameters are necessary, whereas the 3D modulation transfer function (3D-MTF) has been established as a further criterion. Its aim is the determination of the system response between the measurement of a straight, sharp-edged cube and its opposite ideal calculated one. Within the scope of this work simulations and practical investigations regarding the 3D-MTF’s influences and its main issues are specifically investigated. Therefore, different determined edge radii representing the high-frequency spectra lead to various decreasing 3D-MTF characteristics. Furthermore, rising sampling frequencies improve its maximum transfer value to a saturation point in dependence of the radius. To approve these results of previous simulations, three fringe projection scanners were selected to determine the diversity. As the best 3D-MTF characteristic, a saturated transfer value of H_3D( f_N, 3D) = 0.79 has been identified at a sufficient sampling frequency, which is reached at four times the Nyquist limit. This high 3D resolution can mainly be achieved due to an improved camera projector interaction. Additionally, too small sampling ratios lead to uncertainties in the edge function determination, while higher ratios do not show major improvements. In conclusion, the 3D-MTF algorithm has thus been practically verified and its repeatability as well as its robustness have been confirmed.

Full 3D Microwave Tomography enhanced GPR surveys: a case study

NASA Astrophysics Data System (ADS)

Catapano, Ilaria; Soldovieri, Francesco; Affinito, Antonio; Hugenschmidt, Johannes

2014-05-01

Ground Penetrating Radar (GPR) systems are well assessed non-invasive diagnostic tools capable of providing high resolution images of the inner structure of the probed spatial region. Owing to this capability, GPR systems are nowadays more and more considered in the frame of civil engineering surveys since they may give information on constructive details as well as on the aging and risk factors affecting the healthiness of an infrastructure. In this frame, accurate, reliable and easily interpretable images of the probed scenarios are mandatory in order to support the management of maintenance works and assure the safety of structures. Such a requirement motivates the use of different and sophisticated data processing approaches in order to compare more than one image of the same scene, thus improving the reliability and objectiveness of the GPR survey results. Among GPR data processing procedures, Microwave Tomography approaches based on the Born approximation face the imaging as the solution of a linear inverse problem, which is solved by using the Truncated Singular Value Decomposition as a regularized inversion scheme [1]. So far, an approach exploiting a 2D scalar model of the scattering phenomenon have been adopted to process GPR data gathered along a single scan. In this case, 3D images are obtained by interpolating 2D reconstructions (this is referred commonly as pseudo 3D imaging). Such an imaging approach have provided valuable results in several real cases dealing with not only surveys for civil engineering but also archeological prospection, subservice monitoring, security surveys and so on [1-4]. These encouraging results have motivated the development of a full 3D Microwave Tomography approach capable of accounting for the vectorial nature of the wave propagation. The reconstruction capabilities of this novel approach have been assessed mainly against experimental data collected in laboratory controlled conditions. The obtained results corroborate

Modular Curriculum: English/Social Studies, Japanese Civilization.

ERIC Educational Resources Information Center

Spear, Richard L.

This independent study course for college credit is a study of Japanese civilization. The nine lessons that comprise the course are: 1. The Origins of the Civilization: From Primitive to Early Classical Times; 2. The Classical Tradition I: The Religion and Aesthetics of Classical Times; 3. The Classical Tradition II: A View of Court Life through…

32 CFR 516.65 - Litigation reports in civil recovery cases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 3 2014-07-01 2014-07-01 false Litigation reports in civil recovery cases. 516... CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Remedies in Procurement Fraud and Corruption § 516.65 Litigation reports in civil recovery cases. (a) All substantiated PFI cases will be evaluated by PFAs to...

32 CFR 516.65 - Litigation reports in civil recovery cases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 3 2013-07-01 2013-07-01 false Litigation reports in civil recovery cases. 516... CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Remedies in Procurement Fraud and Corruption § 516.65 Litigation reports in civil recovery cases. (a) All substantiated PFI cases will be evaluated by PFAs to...

32 CFR 516.65 - Litigation reports in civil recovery cases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 3 2012-07-01 2009-07-01 true Litigation reports in civil recovery cases. 516... CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Remedies in Procurement Fraud and Corruption § 516.65 Litigation reports in civil recovery cases. (a) All substantiated PFI cases will be evaluated by PFAs to...

Aspects of defects in 3d-3d correspondence

DOE PAGES

Gang, Dongmin; Kim, Nakwoo; Romo, Mauricio; ...

2016-10-12

In this paper we study supersymmetric co-dimension 2 and 4 defects in the compactification of the 6d (2, 0) theory of type A N-1 on a 3-manifold M . The so-called 3d-3d correspondence is a relation between complexified Chern-Simons theory (with gauge group SL(N,C) ) on M and a 3d N=2 theory T N [M ]. We study this correspondence in the presence of supersymmetric defects, which are knots/links inside the 3-manifold. Our study employs a number of different methods: state-integral models for complex Chern-Simons theory, cluster algebra techniques, domain wall theory T [SU(N )], 5d N=2 SYM, and alsomore » supergravity analysis through holography. These methods are complementary and we find agreement between them. In some cases the results lead to highly non-trivial predictions on the partition function. Our discussion includes a general expression for the cluster partition function, which can be used to compute in the presence of maximal and certain class of non-maximal punctures when N > 2. We also highlight the non-Abelian description of the 3d N=2 T N [M ] theory with defect included, when such a description is available. This paper is a companion to our shorter paper, which summarizes our main results.« less

Civil Procedure.

ERIC Educational Resources Information Center

Byer, Robert

1997-01-01

Briefly reviews the historical development of civil procedure (the rules that dictate how a civil case can proceed through the courts) and identifies some of its main components. Discusses procedures such as subject matter jurisdiction, personal jurisdiction, venue, discovery, motions practice, pleadings, pretrial conference, and trials. (MJP)

29 CFR 503.26 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalties-payment and collection. 503.26... SECTION 214(c)(1) OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 503.26 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the Administrator, WHD...

29 CFR 503.26 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalties-payment and collection. 503.26... SECTION 214(c)(1) OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 503.26 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the Administrator, WHD...

29 CFR 503.26 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalties-payment and collection. 503.26... SECTION 214(c)(1) OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 503.26 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the Administrator, WHD...

Automatic 2D-to-3D image conversion using 3D examples from the internet

NASA Astrophysics Data System (ADS)

Konrad, J.; Brown, G.; Wang, M.; Ishwar, P.; Wu, C.; Mukherjee, D.

2012-03-01

The availability of 3D hardware has so far outpaced the production of 3D content. Although to date many methods have been proposed to convert 2D images to 3D stereopairs, the most successful ones involve human operators and, therefore, are time-consuming and costly, while the fully-automatic ones have not yet achieved the same level of quality. This subpar performance is due to the fact that automatic methods usually rely on assumptions about the captured 3D scene that are often violated in practice. In this paper, we explore a radically different approach inspired by our work on saliency detection in images. Instead of relying on a deterministic scene model for the input 2D image, we propose to "learn" the model from a large dictionary of stereopairs, such as YouTube 3D. Our new approach is built upon a key observation and an assumption. The key observation is that among millions of stereopairs available on-line, there likely exist many stereopairs whose 3D content matches that of the 2D input (query). We assume that two stereopairs whose left images are photometrically similar are likely to have similar disparity fields. Our approach first finds a number of on-line stereopairs whose left image is a close photometric match to the 2D query and then extracts depth information from these stereopairs. Since disparities for the selected stereopairs differ due to differences in underlying image content, level of noise, distortions, etc., we combine them by using the median. We apply the resulting median disparity field to the 2D query to obtain the corresponding right image, while handling occlusions and newly-exposed areas in the usual way. We have applied our method in two scenarios. First, we used YouTube 3D videos in search of the most similar frames. Then, we repeated the experiments on a small, but carefully-selected, dictionary of stereopairs closely matching the query. This, to a degree, emulates the results one would expect from the use of an extremely large 3D

Computer Graphic Design Using Auto-CAD and Plug Nozzle Research

NASA Technical Reports Server (NTRS)

Rogers, Rayna C.

2004-01-01

The purpose of creating computer generated images varies widely. They can be use for computational fluid dynamics (CFD), or as a blueprint for designing parts. The schematic that I will be working on the summer will be used to create nozzles that are a part of a larger system. At this phase in the project, the nozzles needed for the systems have been fabricated. One part of my mission is to create both three dimensional and two dimensional models on Auto-CAD 2002 of the nozzles. The research on plug nozzles will allow me to have a better understanding of how they assist in the thrust need for a missile to take off. NASA and the United States military are working together to develop a new design concept. On most missiles a convergent-divergent nozzle is used to create thrust. However, the two are looking into different concepts for the nozzle. The standard convergent-divergent nozzle forces a mixture of combustible fluids and air through a smaller area in comparison to where the combination was mixed. Once it passes through the smaller area known as A8 it comes out the end of the nozzle which is larger the first or area A9. This creates enough thrust for the mechanism whether it is an F-18 fighter jet or a missile. The A9 section of the convergent-divergent nozzle has a mechanism that controls how large A9 can be. This is needed because the pressure of the air coming out nozzle must be equal to that of the ambient pressure other wise there will be a loss of performance in the machine. The plug nozzle however does not need to have an A9 that can vary. When the air flow comes out it can automatically sense what the ambient pressure is and will adjust accordingly. The objective of this design is to create a plug nozzle that is not as complicated mechanically as it counterpart the convergent-divergent nozzle.

Remotely Piloted Aircraft Systems (RPAS) for high resolution topography and monitoring: civil protection purposes on hydrogeological contexts

NASA Astrophysics Data System (ADS)

Bertacchini, Eleonora; Castagnetti, Cristina; Corsini, Alessandro; De Cono, Stefano

2014-10-01

The proposed work concerns the analysis of Remotely Piloted Aircraft Systems (RPAS), also known as drones, UAV (Unmanned Aerial Vehicle) or UAS (Unmanned Aerial System), on hydrogeological contexts for civil protection purposes, underlying the advantages of using a flexible and relatively low cost system. The capabilities of photogrammetric RPAS multi-sensors platform were examined in term of mapping, creation of orthophotos, 3D models generation, data integration into a 3D GIS (Geographic Information System) and validation through independent techniques such as GNSS (Global Navigation Satellite System). The RPAS used (multirotor OktoXL, of the Mikrokopter) was equipped with a GPS (Global Positioning System) receiver, digital cameras for photos and videos, an inertial navigation system, a radio device for communication and telemetry, etc. This innovative way of viewing and understanding the environment showed huge potentialities for the study of the territory, and due to its characteristics could be well integrated with aircraft surveys. However, such characteristics seem to give priority to local applications for rigorous and accurate analysis, while it remains a means of expeditious investigation for more extended areas. According to civil protection purposes, the experimentation was carried out by simulating operational protocols, for example for inspection, surveillance, monitoring, land mapping, georeferencing methods (with or without Ground Control Points - GCP) based on high resolution topography (2D and 3D information).

3D Elevation Program—Virtual USA in 3D

USGS Publications Warehouse

Lukas, Vicki; Stoker, J.M.

2016-04-14

The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) uses a laser system called ‘lidar’ (light detection and ranging) to create a virtual reality map of the Nation that is very accurate. 3D maps have many uses with new uses being discovered all the time.  

29 CFR 501.22 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalties-payment and collection. 501.22... SECTION 218 OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 501.22 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the WHD Administrator, by an ALJ, or...

29 CFR 501.22 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalties-payment and collection. 501.22... SECTION 218 OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 501.22 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the WHD Administrator, by an ALJ, or...

29 CFR 501.22 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalties-payment and collection. 501.22... SECTION 218 OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 501.22 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the WHD Administrator, by an ALJ, or...

29 CFR 501.22 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Civil money penalties-payment and collection. 501.22... SECTION 218 OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 501.22 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the WHD Administrator, by an ALJ, or...

29 CFR 501.22 - Civil money penalties-payment and collection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalties-payment and collection. 501.22... SECTION 218 OF THE IMMIGRATION AND NATIONALITY ACT Enforcement § 501.22 Civil money penalties—payment and collection. Where a civil money penalty is assessed in a final order by the WHD Administrator, by an ALJ, or...

Civil partnerships five years on.

PubMed

Ross, Helen; Gask, Karen; Berrington, Ann

2011-01-01

The Civil Partnership Act 2004, which came into force in December 2005 allowing same-sex couples in the UK to register their relationship for the first time, celebrated its fifth anniversary in December 2010. This article examines civil partnership in England and Wales, five years on from its introduction. The characteristics of those forming civil partnerships between 2005 and 2010 including age, sex and previous marital/civil partnership status are examined. These are then compared with the characteristics of those marrying over the same period. Further comparisons are also made between civil partnership dissolutions and divorce. The article presents estimates of the number of people currently in civil partnerships and children of civil partners. Finally the article examines attitudes towards same-sex and civil partner couples both in the UK and in other countries across Europe.

3D Band Diagram and Photoexcitation of 2D-3D Semiconductor Heterojunctions.

PubMed

Li, Bo; Shi, Gang; Lei, Sidong; He, Yongmin; Gao, Weilu; Gong, Yongji; Ye, Gonglan; Zhou, Wu; Keyshar, Kunttal; Hao, Ji; Dong, Pei; Ge, Liehui; Lou, Jun; Kono, Junichiro; Vajtai, Robert; Ajayan, Pulickel M

2015-09-09

The emergence of a rich variety of two-dimensional (2D) layered semiconductor materials has enabled the creation of atomically thin heterojunction devices. Junctions between atomically thin 2D layers and 3D bulk semiconductors can lead to junctions that are fundamentally electronically different from the covalently bonded conventional semiconductor junctions. Here we propose a new 3D band diagram for the heterojunction formed between n-type monolayer MoS2 and p-type Si, in which the conduction and valence band-edges of the MoS2 monolayer are drawn for both stacked and in-plane directions. This new band diagram helps visualize the flow of charge carriers inside the device in a 3D manner. Our detailed wavelength-dependent photocurrent measurements fully support the diagrams and unambiguously show that the band alignment is type I for this 2D-3D heterojunction. Photogenerated electron-hole pairs in the atomically thin monolayer are separated and driven by an external bias and control the "on/off" states of the junction photodetector device. Two photoresponse regimes with fast and slow relaxation are also revealed in time-resolved photocurrent measurements, suggesting the important role played by charge trap states.

Phase correction for three-dimensional (3D) diffusion-weighted interleaved EPI using 3D multiplexed sensitivity encoding and reconstruction (3D-MUSER).

PubMed

Chang, Hing-Chiu; Hui, Edward S; Chiu, Pui-Wai; Liu, Xiaoxi; Chen, Nan-Kuei

2018-05-01

Three-dimensional (3D) multiplexed sensitivity encoding and reconstruction (3D-MUSER) algorithm is proposed to reduce aliasing artifacts and signal corruption caused by inter-shot 3D phase variations in 3D diffusion-weighted echo planar imaging (DW-EPI). 3D-MUSER extends the original framework of multiplexed sensitivity encoding (MUSE) to a hybrid k-space-based reconstruction, thereby enabling the correction of inter-shot 3D phase variations. A 3D single-shot EPI navigator echo was used to measure inter-shot 3D phase variations. The performance of 3D-MUSER was evaluated by analyses of point-spread function (PSF), signal-to-noise ratio (SNR), and artifact levels. The efficacy of phase correction using 3D-MUSER for different slab thicknesses and b-values were investigated. Simulations showed that 3D-MUSER could eliminate artifacts because of through-slab phase variation and reduce noise amplification because of SENSE reconstruction. All aliasing artifacts and signal corruption in 3D interleaved DW-EPI acquired with different slab thicknesses and b-values were reduced by our new algorithm. A near-whole brain single-slab 3D DTI with 1.3-mm isotropic voxel acquired at 1.5T was successfully demonstrated. 3D phase correction for 3D interleaved DW-EPI data is made possible by 3D-MUSER, thereby improving feasible slab thickness and maximum feasible b-value. Magn Reson Med 79:2702-2712, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Europeana and 3D

NASA Astrophysics Data System (ADS)

Pletinckx, D.

2011-09-01

The current 3D hype creates a lot of interest in 3D. People go to 3D movies, but are we ready to use 3D in our homes, in our offices, in our communication? Are we ready to deliver real 3D to a general public and use interactive 3D in a meaningful way to enjoy, learn, communicate? The CARARE project is realising this for the moment in the domain of monuments and archaeology, so that real 3D of archaeological sites and European monuments will be available to the general public by 2012. There are several aspects to this endeavour. First of all is the technical aspect of flawlessly delivering 3D content over all platforms and operating systems, without installing software. We have currently a working solution in PDF, but HTML5 will probably be the future. Secondly, there is still little knowledge on how to create 3D learning objects, 3D tourist information or 3D scholarly communication. We are still in a prototype phase when it comes to integrate 3D objects in physical or virtual museums. Nevertheless, Europeana has a tremendous potential as a multi-facetted virtual museum. Finally, 3D has a large potential to act as a hub of information, linking to related 2D imagery, texts, video, sound. We describe how to create such rich, explorable 3D objects that can be used intuitively by the generic Europeana user and what metadata is needed to support the semantic linking.

Civil Courts.

ERIC Educational Resources Information Center

Eaneman, Paulette S.; And Others

These materials are part of the Project Benchmark series designed to teach secondary students about our legal concepts and systems. This unit focuses on the structure and procedures of the civil court systems. The materials outline common law heritage, kinds of cases, jurisdiction, civil pretrial procedure, trial procedure, and a sample automobile…

Axionic D3-D7 inflation

NASA Astrophysics Data System (ADS)

Burgess, C. P.; Cline, J. M.; Postma, M.

2009-03-01

We study the motion of a D3 brane moving within a Type IIB string vacuum compactified to 4D on K3 × T2/Z2 in the presence of D7 and O7 planes. We work within the effective 4D supergravity describing how the mobile D3 interacts with the lightest bulk moduli of the compactification, including the effects of modulus-stabilizing fluxes. We seek inflationary solutions to the resulting equations, performing our search numerically in order to avoid resorting to approximate parameterizations of the low-energy potential. We consider uplifting from D-terms and from the supersymmetry-breaking effects of anti-D3 branes. We find examples of slow-roll inflation (with anti-brane uplifting) with the mobile D3 moving along the toroidal directions, falling towards a D7-O7 stack starting from the antipodal point. The inflaton turns out to be a linear combination of the brane position and the axionic partner of the K3 volume modulus, and the similarity of the potential along the inflaton direction with that of racetrack inflation leads to the prediction ns <= 0.95 for the spectral index. The slow roll is insensitive to most of the features of the effective superpotential, and requires a one-in-104 tuning to ensure that the torus is close to square in shape. We also consider D-term inflation with the D3 close to the attractive D7, but find that for a broad (but not exhaustive) class of parameters the conditions for slow roll tend to destabilize the bulk moduli. In contrast to the axionic case, the best inflationary example of this kind requires the delicate adjustment of potential parameters (much more than the part-per-mille level), and gives inflation only at an inflection point of the potential (and so suffers from additional fine-tuning of initial conditions to avoid an overshoot problem).

32 CFR 277.3 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Policy. 277.3 Section 277.3 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS IMPLEMENTATION OF THE PROGRAM FRAUD CIVIL REMEDIES ACT § 277.3 Policy. It is DoD policy to redress fraud in DoD...

Preliminary structural sizing of a Mach 3.0 high-speed civil transport model

NASA Technical Reports Server (NTRS)

Blackburn, Charles L.

1992-01-01

An analysis has been performed pertaining to the structural resizing of a candidate Mach 3.0 High Speed Civil Transport (HSCT) conceptual design using a computer program called EZDESIT. EZDESIT is a computer program which integrates the PATRAN finite element modeling program to the COMET finite element analysis program for the purpose of calculating element sizes or cross sectional dimensions. The purpose of the present report is to document the procedure used in accomplishing the preliminary structural sizing and to present the corresponding results.

News media reporting on civil litigation and its influence on civil justice decision making.

PubMed

Robbennolt, Jennifer K; Studebaker, Christina A

2003-02-01

The news media have the potential to act as a powerful influence on the civil litigation system, influencing decision making in particular cases and on the system more generally as media reports influence the decision making of various participants in the system. This paper reviews the research that has examined the relationship between news media reporting and civil litigation and proposes a framework that integrates this work and provides guidance for future research efforts. Specifically, we discuss the nature of media reporting on civil litigation, perceptions of the civil litigation system held by the public and legal actors, and the potential influence of news reporting about civil litigation on the decision making of jurors, judges, civil litigants, and policymakers. Overall, the research suggests that news reporting of civil litigation presents a systematically distorted picture of civil litigation and that this reporting can influence perceptions and outcomes of civil litigation in various ways. However, there are many gaps in the existing research that need to be filled. The proposed organizational scheme helps to identify ways that future research can provide links between the findings of existing research and to identify ways in which this research can be extended to new areas.

"3D fusion" echocardiography improves 3D left ventricular assessment: comparison with 2D contrast echocardiography.

PubMed

Augustine, Daniel; Yaqub, Mohammad; Szmigielski, Cezary; Lima, Eduardo; Petersen, Steffen E; Becher, Harald; Noble, J Alison; Leeson, Paul

2015-02-01

Three-dimensional fusion echocardiography (3DFE) is a novel postprocessing approach that utilizes imaging data acquired from multiple 3D acquisitions. We assessed image quality, endocardial border definition, and cardiac wall motion in patients using 3DFE compared to standard 3D images (3D) and results obtained with contrast echocardiography (2DC). Twenty-four patients (mean age 66.9 ± 13 years, 17 males, 7 females) undergoing 2DC had three, noncontrast, 3D apical volumes acquired at rest. Images were fused using an automated image fusion approach. Quality of the 3DFE was compared to both 3D and 2DC based on contrast-to-noise ratio (CNR) and endocardial border definition. We then compared clinical wall-motion score index (WMSI) calculated from 3DFE and 3D to those obtained from 2DC images. Fused 3D volumes had significantly improved CNR (8.92 ± 1.35 vs. 6.59 ± 1.19, P < 0.0005) and segmental image quality (2.42 ± 0.99 vs. 1.93 ± 1.18, P < 0.005) compared to unfused 3D acquisitions. Levels achieved were closer to scores for 2D contrast images (CNR: 9.04 ± 2.21, P = 0.6; segmental image quality: 2.91 ± 0.37, P < 0.005). WMSI calculated from fused 3D volumes did not differ significantly from those obtained from 2D contrast echocardiography (1.06 ± 0.09 vs. 1.07 ± 0.15, P = 0.69), whereas unfused images produced significantly more variable results (1.19 ± 0.30). This was confirmed by a better intraclass correlation coefficient (ICC 0.72; 95% CI 0.32-0.88) relative to comparisons with unfused images (ICC 0.56; 95% CI 0.02-0.81). 3DFE significantly improves left ventricular image quality compared to unfused 3D in a patient population and allows noncontrast assessment of wall motion that approaches that achieved with 2D contrast echocardiography. © 2014, Wiley Periodicals, Inc.

Energy and civilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basalla, G.

1979-07-01

The author challenges the validity of linking energy consumption and civilization levels and suggests that it might be wise to discard the equation. Variations in how individuals choose to use energy invalidate any strict linkage. The confusion caused by equating physical energy with moral, religious and other types of energy is a result of mixing definable sciences with indefinable values. The energy-civilization equation dates to the beginning of the Industrial Revolution, when new energy sources transformed social and economic life and were credited with enhancing civilization. The pessimistic view can also be taken, but the author questions whether declining energymore » use will lead to the decline of civilization as quotes from 18th - 20th Century thinkers indicate. 14 references.« less

The Role of Federal Troops in Quelling Civil Disturbance in Washington, DC, April 1968

DTIC Science & Technology

1993-01-01

15:17’ TAMU HISCTORY DEPT PAG’E . 002 THE USE OF FEDERAL TROOPS IN QUELLING CIVIL UNREST IN WASHINGTON , D.C., APRIL 1968 A Thesis By BARRYE LA TROYE ...BARRYE LA TROYE PRICE Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF ARTS Approved as to style...Federal Troops in Quelling Civil Unrest in Washington, D.C., April 1968. (May 1994) Barrye La Troye Price, B.B.A., University of Houston Chair of

From 3D view to 3D print

NASA Astrophysics Data System (ADS)

Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

2014-08-01

In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers

Synthesis of methyl 3-O-alpha-D-mannopyranosyl-alpha-D-talopyranoside and methyl 3-O-alpha-D-talopyranosyl-alpha-D-talopyranoside.

PubMed

Dubey, R; Jain, R K; Abbas, S A; Matta, K L

1987-08-01

Methyl 2-O-benzyl-3-O-(2,3,4,6-tetra-O-acetyl-alpha-D-mannopyranosyl)-alpha- D-mannopyranoside (4) and methyl 2-O-benzyl-3-O-alpha-D-mannopyranosyl-alpha-D-mannopyranoside (6) were prepared from a common intermediate, namely, methyl 2-O-benzyl-4,6-O-benzylidene-3-O-(2,3,4,6-tetra-O-acetyl-alpha-D- mannopyranosyl)-alpha-D-mannopyranoside. On treatment with tert-butylchlorodiphenylsilane, in N,N-dimethylformamide in the presence of imidazole, 4 and 6 afforded methyl 2-O-benzyl-6-O-tert-butyldiphenylsilyl-3-O-(2,3,4,6-tetra-O-acetyl -alpha-D- mannopyranosyl)-alpha-D-mannopyranoside (7), and methyl 2-O-benzyl-6-O-tert-butyldiphenylsilyl-3-O-(6-O-tert- butyldiphenylsilyl-alpha-D-mannopyranosyl)-alpha-D-mannopyranoside (8), respectively. Compound 8 was converted into its 2,3-O-isopropylidene derivative (9), and oxidation of 7 and 9 with pyridinium chlorochromate, and reduction of the resulting carbonyl intermediates gave methyl 2-O-benzyl-6-O-tert-butyldiphenylsilyl-3-O-(2,3,4,6-tetra-O-acetyl -alpha-D- mannopyranosyl)-alpha-D-talopyranoside and methyl 2-O-benzyl-6-O-tert-butyldiphenylsilyl-3-O-(6-O-tert-butyldiphe nylsilyl- 2,3-O-isopropylidene-alpha-D-talopyranosyl)-alpha-D-talopyranoside , respectively. Removal of the protecting groups furnished the title disaccharides.

Automatic updating and 3D modeling of airport information from high resolution images using GIS and LIDAR data

NASA Astrophysics Data System (ADS)

Lv, Zheng; Sui, Haigang; Zhang, Xilin; Huang, Xianfeng

2007-11-01

As one of the most important geo-spatial objects and military establishment, airport is always a key target in fields of transportation and military affairs. Therefore, automatic recognition and extraction of airport from remote sensing images is very important and urgent for updating of civil aviation and military application. In this paper, a new multi-source data fusion approach on automatic airport information extraction, updating and 3D modeling is addressed. Corresponding key technologies including feature extraction of airport information based on a modified Ostu algorithm, automatic change detection based on new parallel lines-based buffer detection algorithm, 3D modeling based on gradual elimination of non-building points algorithm, 3D change detecting between old airport model and LIDAR data, typical CAD models imported and so on are discussed in detail. At last, based on these technologies, we develop a prototype system and the results show our method can achieve good effects.

Suggestions for Popularizing Civil Aviation

NASA Technical Reports Server (NTRS)

1926-01-01

The public generally is taking very little interest in the progress of Civil Aviation, and the time has come to educate the public in aeronautics and to make them realize the far-reaching importance of air transport. Briefly, the whole problem resolves itself into discovering and applying means for bringing some of the many aspects and effects of civil aviation into the everyday lives of the public. The report suggests three principal groups of methods: (1) Bring aviation into daily contact with the public. (2) Bring the public into daily contact with aviation. (3) General publicity.

3D gaze tracking system for NVidia 3D Vision®.

PubMed

Wibirama, Sunu; Hamamoto, Kazuhiko

2013-01-01

Inappropriate parallax setting in stereoscopic content generally causes visual fatigue and visual discomfort. To optimize three dimensional (3D) effects in stereoscopic content by taking into account health issue, understanding how user gazes at 3D direction in virtual space is currently an important research topic. In this paper, we report the study of developing a novel 3D gaze tracking system for Nvidia 3D Vision(®) to be used in desktop stereoscopic display. We suggest an optimized geometric method to accurately measure the position of virtual 3D object. Our experimental result shows that the proposed system achieved better accuracy compared to conventional geometric method by average errors 0.83 cm, 0.87 cm, and 1.06 cm in X, Y, and Z dimensions, respectively.

Computational Assessment of the Aerodynamic Performance of a Variable-Speed Power Turbine for Large Civil Tilt-Rotor Application

NASA Technical Reports Server (NTRS)

Welch, Gerard E.

2011-01-01

The main rotors of the NASA Large Civil Tilt-Rotor notional vehicle operate over a wide speed-range, from 100% at take-off to 54% at cruise. The variable-speed power turbine offers one approach by which to effect this speed variation. Key aero-challenges include high work factors at cruise and wide (40 to 60 deg.) incidence variations in blade and vane rows over the speed range. The turbine design approach must optimize cruise efficiency and minimize off-design penalties at take-off. The accuracy of the off-design incidence loss model is therefore critical to the turbine design. In this effort, 3-D computational analyses are used to assess the variation of turbine efficiency with speed change. The conceptual design of a 4-stage variable-speed power turbine for the Large Civil Tilt-Rotor application is first established at the meanline level. The design of 2-D airfoil sections and resulting 3-D blade and vane rows is documented. Three-dimensional Reynolds Averaged Navier-Stokes computations are used to assess the design and off-design performance of an embedded 1.5-stage portion-Rotor 1, Stator 2, and Rotor 2-of the turbine. The 3-D computational results yield the same efficiency versus speed trends predicted by meanline analyses, supporting the design choice to execute the turbine design at the cruise operating speed.

12 CFR 263.62 - Relevant considerations for assessment of civil penalty.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Relevant considerations for assessment of civil... Collection of Civil Money Penalties § 263.62 Relevant considerations for assessment of civil penalty. In... the penalty with respect to the financial resources and good faith of the person charged, the gravity...

Civil Law Glossary.

ERIC Educational Resources Information Center

Update on Law-Related Education, 1997

1997-01-01

Presents a glossary of civil law terms originally compiled for journalists by the American Bar Association. Defines many essential civil law concepts and practices including compensatory damages, jurisdiction, motion to dismiss, discovery, and remedy. (MJP)

Investigation of the C-3-epi-25(OH)D3 of 25-hydroxyvitamin D3 in urban schoolchildren.

PubMed

Berger, Samantha E; Van Rompay, Maria I; Gordon, Catherine M; Goodman, Elizabeth; Eliasziw, Misha; Holick, Michael F; Sacheck, Jennifer M

2018-03-01

The physiological relevance C-3 epimer of 25-hydroxyvitamin D (3-epi-25(OH)D) is not well understood among youth. The objective of this study was to assess whether demographic/physiologic characteristics were associated with 3-epi-25(OH)D 3 concentrations in youth. Associations between 3-epi-25(OH)D 3 and demographics and between 3-epi-25(OH)D 3 , total 25-hydroxyvitamin (25(OH)D) (25(OH)D 2 + 25(OH)D 3 ), total cholesterol, high-density lipoprotein, low-density lipoprotein, and triglycerides were examined in racially/ethnically diverse schoolchildren (n = 682; age, 8-15 years) at Boston-area urban schools. Approximately 50% of participants had detectable 3-epi-25(OH)D 3 (range 0.95-3.95 ng/mL). The percentage of 3-epi-25(OH)D 3 of total 25(OH)D ranged from 2.5% to 17.0% (median 5.5%). Males were 38% more likely than females to have detectable 3-epi-25(OH)D 3 concentrations. Both Asian and black race/ethnicity were associated with lower odds of having detectable 3-epi-25(OH)D 3 compared with non-Hispanic white children (Asian vs. white, odds ratio (OR) 0.28, 95% confidence interval (CI) 0.14-0.53; black vs. white, OR 0.38, 95%CI 0.23-0.63, p < 0.001). Having an adequate (20-29 ng/mL) or optimal (>30 ng/mL) 25(OH)D concentration was associated with higher odds of having detectable 3-epi-25(OH)D 3 than having an inadequate (<20 ng/mL) concentration (OR 4.78, 95%CI 3.23-6.94 or OR 14.10, 95%CI 7.10-28.0, respectively). There was no association between 3-epi-25(OH)D 3 and blood lipids. However, when considering 3-epi-25(OH)D 3 as a percentage of total 25(OH)D, total cholesterol was lower in children with percent 3-epi-25(OH)D 3 above the median (mean difference -7.1 mg/dL, p = 0.01). In conclusion, among schoolchildren, sex, race/ethnicity, and total serum 25(OH)D concentration is differentially associated with 3-epi-25(OH)D. The physiological relevance of 3-epi-25(OH)D 3 may be related to the 3-epi-25(OH)D 3 as a percentage of total 25(OH)D and should be considered in

PLOT3D/AMES, GENERIC UNIX VERSION USING DISSPLA (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, GENERIC UNIX VERSION USING DISSPLA (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

iCAVE: an open source tool for visualizing biomolecular networks in 3D, stereoscopic 3D and immersive 3D

PubMed Central

Liluashvili, Vaja; Kalayci, Selim; Fluder, Eugene; Wilson, Manda; Gabow, Aaron

2017-01-01

Abstract Visualizations of biomolecular networks assist in systems-level data exploration in many cellular processes. Data generated from high-throughput experiments increasingly inform these networks, yet current tools do not adequately scale with concomitant increase in their size and complexity. We present an open source software platform, interactome-CAVE (iCAVE), for visualizing large and complex biomolecular interaction networks in 3D. Users can explore networks (i) in 3D using a desktop, (ii) in stereoscopic 3D using 3D-vision glasses and a desktop, or (iii) in immersive 3D within a CAVE environment. iCAVE introduces 3D extensions of known 2D network layout, clustering, and edge-bundling algorithms, as well as new 3D network layout algorithms. Furthermore, users can simultaneously query several built-in databases within iCAVE for network generation or visualize their own networks (e.g., disease, drug, protein, metabolite). iCAVE has modular structure that allows rapid development by addition of algorithms, datasets, or features without affecting other parts of the code. Overall, iCAVE is the first freely available open source tool that enables 3D (optionally stereoscopic or immersive) visualizations of complex, dense, or multi-layered biomolecular networks. While primarily designed for researchers utilizing biomolecular networks, iCAVE can assist researchers in any field. PMID:28814063

iCAVE: an open source tool for visualizing biomolecular networks in 3D, stereoscopic 3D and immersive 3D.

PubMed

Liluashvili, Vaja; Kalayci, Selim; Fluder, Eugene; Wilson, Manda; Gabow, Aaron; Gümüs, Zeynep H

2017-08-01

Visualizations of biomolecular networks assist in systems-level data exploration in many cellular processes. Data generated from high-throughput experiments increasingly inform these networks, yet current tools do not adequately scale with concomitant increase in their size and complexity. We present an open source software platform, interactome-CAVE (iCAVE), for visualizing large and complex biomolecular interaction networks in 3D. Users can explore networks (i) in 3D using a desktop, (ii) in stereoscopic 3D using 3D-vision glasses and a desktop, or (iii) in immersive 3D within a CAVE environment. iCAVE introduces 3D extensions of known 2D network layout, clustering, and edge-bundling algorithms, as well as new 3D network layout algorithms. Furthermore, users can simultaneously query several built-in databases within iCAVE for network generation or visualize their own networks (e.g., disease, drug, protein, metabolite). iCAVE has modular structure that allows rapid development by addition of algorithms, datasets, or features without affecting other parts of the code. Overall, iCAVE is the first freely available open source tool that enables 3D (optionally stereoscopic or immersive) visualizations of complex, dense, or multi-layered biomolecular networks. While primarily designed for researchers utilizing biomolecular networks, iCAVE can assist researchers in any field. © The Authors 2017. Published by Oxford University Press.

Recording stereoscopic 3D neurosurgery with a head-mounted 3D camera system.

PubMed

Lee, Brian; Chen, Brian R; Chen, Beverly B; Lu, James Y; Giannotta, Steven L

2015-06-01

Stereoscopic three-dimensional (3D) imaging can present more information to the viewer and further enhance the learning experience over traditional two-dimensional (2D) video. Most 3D surgical videos are recorded from the operating microscope and only feature the crux, or the most important part of the surgery, leaving out other crucial parts of surgery including the opening, approach, and closing of the surgical site. In addition, many other surgeries including complex spine, trauma, and intensive care unit procedures are also rarely recorded. We describe and share our experience with a commercially available head-mounted stereoscopic 3D camera system to obtain stereoscopic 3D recordings of these seldom recorded aspects of neurosurgery. The strengths and limitations of using the GoPro(®) 3D system as a head-mounted stereoscopic 3D camera system in the operating room are reviewed in detail. Over the past several years, we have recorded in stereoscopic 3D over 50 cranial and spinal surgeries and created a library for education purposes. We have found the head-mounted stereoscopic 3D camera system to be a valuable asset to supplement 3D footage from a 3D microscope. We expect that these comprehensive 3D surgical videos will become an important facet of resident education and ultimately lead to improved patient care.

CFL3D, FUN3d, and NSU3D Contributions to the Fifth Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Park, Michael A.; Laflin, Kelly R.; Chaffin, Mark S.; Powell, Nicholas; Levy, David W.

2013-01-01

Results presented at the Fifth Drag Prediction Workshop using CFL3D, FUN3D, and NSU3D are described. These are calculations on the workshop provided grids and drag adapted grids. The NSU3D results have been updated to reflect an improvement to skin friction calculation on skewed grids. FUN3D results generated after the workshop are included for custom participant generated grids and a grid from a previous workshop. Uniform grid refinement at the design condition shows a tight grouping in calculated drag, where the variation in the pressure component of drag is larger than the skin friction component. At this design condition, A fine-grid drag value was predicted with a smaller drag adjoint adapted grid via tetrahedral adaption to a metric and mixed-element subdivision. The buffet study produced larger variation than the design case, which is attributed to large differences in the predicted side-of-body separation extent. Various modeling and discretization approaches had a strong impact on predicted side-of-body separation. This large wing root separation bubble was not observed in wind tunnel tests indicating that more work is necessary in modeling wing root juncture flows to predict experiments.

The agreement between 3D, standard 2D and triplane 2D speckle tracking: effects of image quality and 3D volume rate.

PubMed

Trache, Tudor; Stöbe, Stephan; Tarr, Adrienn; Pfeiffer, Dietrich; Hagendorff, Andreas

2014-12-01

Comparison of 3D and 2D speckle tracking performed on standard 2D and triplane 2D datasets of normal and pathological left ventricular (LV) wall-motion patterns with a focus on the effect that 3D volume rate (3DVR), image quality and tracking artifacts have on the agreement between 2D and 3D speckle tracking. 37 patients with normal LV function and 18 patients with ischaemic wall-motion abnormalities underwent 2D and 3D echocardiography, followed by offline speckle tracking measurements. The values of 3D global, regional and segmental strain were compared with the standard 2D and triplane 2D strain values. Correlation analysis with the LV ejection fraction (LVEF) was also performed. The 3D and 2D global strain values correlated good in both normally and abnormally contracting hearts, though systematic differences between the two methods were observed. Of the 3D strain parameters, the area strain showed the best correlation with the LVEF. The numerical agreement of 3D and 2D analyses varied significantly with the volume rate and image quality of the 3D datasets. The highest correlation between 2D and 3D peak systolic strain values was found between 3D area and standard 2D longitudinal strain. Regional wall-motion abnormalities were similarly detected by 2D and 3D speckle tracking. 2DST of triplane datasets showed similar results to those of conventional 2D datasets. 2D and 3D speckle tracking similarly detect normal and pathological wall-motion patterns. Limited image quality has a significant impact on the agreement between 3D and 2D numerical strain values.

Massively parallel implementation of 3D-RISM calculation with volumetric 3D-FFT.

PubMed

Maruyama, Yutaka; Yoshida, Norio; Tadano, Hiroto; Takahashi, Daisuke; Sato, Mitsuhisa; Hirata, Fumio

2014-07-05

A new three-dimensional reference interaction site model (3D-RISM) program for massively parallel machines combined with the volumetric 3D fast Fourier transform (3D-FFT) was developed, and tested on the RIKEN K supercomputer. The ordinary parallel 3D-RISM program has a limitation on the number of parallelizations because of the limitations of the slab-type 3D-FFT. The volumetric 3D-FFT relieves this limitation drastically. We tested the 3D-RISM calculation on the large and fine calculation cell (2048(3) grid points) on 16,384 nodes, each having eight CPU cores. The new 3D-RISM program achieved excellent scalability to the parallelization, running on the RIKEN K supercomputer. As a benchmark application, we employed the program, combined with molecular dynamics simulation, to analyze the oligomerization process of chymotrypsin Inhibitor 2 mutant. The results demonstrate that the massive parallel 3D-RISM program is effective to analyze the hydration properties of the large biomolecular systems. Copyright © 2014 Wiley Periodicals, Inc.

29 CFR 502.19 - Civil money penalty assessment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Civil money penalty assessment. 502.19 Section 502.19 Labor... penalty assessment. (a) A civil money penalty may be assessed by the Administrator, WHD for each violation... of penalty to be assessed for any violation of the work contract as provided in the H-2A provisions...

29 CFR 502.19 - Civil money penalty assessment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Civil money penalty assessment. 502.19 Section 502.19 Labor... penalty assessment. (a) A civil money penalty may be assessed by the Administrator, WHD for each violation... of penalty to be assessed for any violation of the work contract as provided in the H-2A provisions...

29 CFR 502.19 - Civil money penalty assessment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Civil money penalty assessment. 502.19 Section 502.19 Labor... penalty assessment. (a) A civil money penalty may be assessed by the Administrator, WHD for each violation... of penalty to be assessed for any violation of the work contract as provided in the H-2A provisions...

29 CFR 502.19 - Civil money penalty assessment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Civil money penalty assessment. 502.19 Section 502.19 Labor... penalty assessment. (a) A civil money penalty may be assessed by the Administrator, WHD for each violation... of penalty to be assessed for any violation of the work contract as provided in the H-2A provisions...

2 CFR 180.915 - Civil judgment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 2 Grants and Agreements 1 2013-01-01 2013-01-01 false Civil judgment. 180.915 Section 180.915... Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction, whether by verdict, decision, settlement, stipulation, other disposition which creates a civil...

2 CFR 180.915 - Civil judgment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 2 Grants and Agreements 1 2012-01-01 2012-01-01 false Civil judgment. 180.915 Section 180.915... Civil judgment. Civil judgment means the disposition of a civil action by any court of competent jurisdiction, whether by verdict, decision, settlement, stipulation, other disposition which creates a civil...