Science.gov

Sample records for automated clearance

  1. Automation for "Direct-to" Clearances in Air-Traffic Control

    NASA Technical Reports Server (NTRS)

    Erzberger, Heinz; McNally, David

    2006-01-01

    A method of automation, and a system of computer hardware and software to implement the method, have been invented to assist en-route air-traffic controllers in the issuance of clearances to fly directly to specified waypoints or navigation fixes along straight paths that deviate from previously filed flight plans. Such clearances, called "direct-to" clearances, have been in use since before the invention of this method and system.

  2. A High Throughput, 384-Well, Semi-Automated, Hepatocyte Intrinsic Clearance Assay for Screening New Molecular Entities in Drug Discovery.

    PubMed

    Heinle, Lance; Peterkin, Vincent; de Morais, Sonia M; Jenkins, Gary J; Badagnani, Ilaria

    2015-01-01

    A high throughput, semi-automated clearance screening assay in hepatocytes was developed allowing a scientist to generate data for 96 compounds in one week. The 384-well format assay utilizes a Thermo Multidrop Combi and an optimized LC-MS/MS method. The previously reported LCMS/ MS method reduced the analytical run time by 3-fold, down to 1.2 min injection-to-injection. The Multidrop was able to deliver hepatocytes to 384-well plates with minimal viability loss. Comparison of results from the new 384-well and historical 24-well assays yielded a correlation of 0.95. In addition, results obtained for 25 marketed drugs with various metabolism pathways had a correlation of 0.75 when compared with literature values. Precision was maintained in the new format as 8 compounds tested in ≥39 independent experiments had coefficients of variation ≤21%. The ability to predict in vivo clearances using the new stability assay format was also investigated using 22 marketed drugs and 26 AbbVie compounds. Correction of intrinsic clearance values with binding to hepatocytes (in vitro data) and plasma (in vivo data) resulted in a higher in vitro to in vivo correlation when comparing 22 marketed compounds in human (0.80 vs 0.35) and 26 AbbVie Discovery compounds in rat (0.56 vs 0.17), demonstrating the importance of correcting for binding in clearance studies. This newly developed high throughput, semi-automated clearance assay allows for rapid screening of Discovery compounds to enable Structure Activity Relationship (SAR) analysis based on high quality hepatocyte stability data in sufficient quantity and quality to drive the next round of compound synthesis.

  3. Comparing taxi clearance input layouts for advancements in flight deck automation for surface operations

    NASA Astrophysics Data System (ADS)

    Cheng, Lara W. S.

    Airport moving maps (AMMs) have been shown to decrease navigation errors, increase taxiing speed, and reduce workload when they depict airport layout, current aircraft position, and the cleared taxi route. However, current technologies are limited in their ability to depict the cleared taxi route due to the unavailability of datacomm or other means of electronically transmitting clearances from ATC to the flight deck. This study examined methods by which pilots can input ATC-issued taxi clearances to support taxi route depictions on the AMM. Sixteen general aviation (GA) pilots used a touchscreen monitor to input taxi clearances using two input layouts, softkeys and QWERTY, each with and without feedforward (graying out invalid inputs). QWERTY yielded more taxi route input errors than the softkeys layout. The presence of feedforward did not produce fewer taxi route input errors than in the non-feedforward condition. The QWERTY layout did reduce taxi clearance input times relative to the softkeys layout, but when feedforward was present this effect was observed only for the longer, 6-segment taxi clearances. It was observed that with the softkeys layout, feedforward reduced input times compared to non-feedforward but only for the 4-segment clearances. Feedforward did not support faster taxi clearance input times for the QWERTY layout. Based on the results and analyses of the present study, it is concluded that for taxi clearance inputs, (1) QWERTY remain the standard for alphanumeric inputs, and (2) feedforward be investigated further, with a focus on participant preference and performance of black-gray contrast of keys.

  4. Validation of a semi-automated human hepatocyte assay for the determination and prediction of intrinsic clearance in discovery.

    PubMed

    Reddy, Anita; Heimbach, Tycho; Freiwald, Sascha; Smith, Danielle; Winters, Roger; Michael, Steven; Surendran, Narayanan; Cai, Hongliang

    2005-02-23

    An automated high throughput human hepatocyte assay has been established with a 96-well format using a Tecan Genesistrade mark Workstation. Validation of this assay was performed with nine commercially available compounds and an additional 10 Pfizer compounds with varying hepatic extraction ratios (E(H)) ranging from 0.02 to approximately 1. The incubation conditions in the automated assay are readily and precisely controlled and cell viability of over 80% was achieved in the automated assay further confirming its utility for absorption, distribution, metabolism, and excretion (toxicity) (ADME (T)) screening. The results of the nine commercial compounds correlate with both manually executed (R(2)=0.97) and literature reported experimental results (R(2)=0.93). Overall, measured E(H)s were within two-fold of the literature values for approximately 90% of the 19 compounds tested. Additionally, good inter- and intra-day reproducibility was observed for all the 19 compounds. In conclusion, an automated and robust assay suitable for simultaneously testing up to 48 compounds with multiple time points has been validated. Throughput of 192 compounds per run can be achieved using 384-well plates to meet increasing needs in drug discovery. Currently, this automated assay is used to support early discovery profiling towards lead optimization of various discovery targets/programs.

  5. MINEFIELD CLEARANCE

    DTIC Science & Technology

    ACCURACY, DETONATIONS, EMPLACEMENT, ENEMY, EXPLOSIONS, GUNFIRE, MINE CLEARANCE , MINEFIELDS, MINES(ORDNANCE), RECIPROCATING ENGINES, RELIABILITY, SYNCHRONISM, TRANSVERSE, VELOCITY, VERTICAL ORIENTATION, VULNERABILITY.

  6. 15 CFR 752.15 - Export clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Export clearance. 752.15 Section 752... OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS SPECIAL COMPREHENSIVE LICENSE § 752.15 Export clearance. (a) Shipper's Export Declaration (SED) or Automated Export...

  7. Tactics for Route Clearance

    DTIC Science & Technology

    1995-04-01

    Tadics for Jtoute Clearance By William C. Schneck, Jr., and Brian M. Green I n Somalia, military police used mine detectors to sweep for command...useful lessons re- garding command-detonated mines and route clearance . It is not possible to completely eliminate losses from mines, but commanders...success, route clearance must be treated as a combined arms combat operation. Infantry, armor, engineer, artillery, aviation, intelligence, and

  8. Malaria parasite clearance.

    PubMed

    White, Nicholas J

    2017-02-23

    Following anti-malarial drug treatment asexual malaria parasite killing and clearance appear to be first order processes. Damaged malaria parasites in circulating erythrocytes are removed from the circulation mainly by the spleen. Splenic clearance functions increase markedly in acute malaria. Either the entire infected erythrocytes are removed because of their reduced deformability or increased antibody binding or, for the artemisinins which act on young ring stage parasites, splenic pitting of drug-damaged parasites is an important mechanism of clearance. The once-infected erythrocytes returned to the circulation have shortened survival. This contributes to post-artesunate haemolysis that may follow recovery in non-immune hyperparasitaemic patients. As the parasites mature Plasmodium vivax-infected erythrocytes become more deformable, whereas Plasmodium falciparum-infected erythrocytes become less deformable, but they escape splenic filtration by sequestering in venules and capillaries. Sequestered parasites are killed in situ by anti-malarial drugs and then disintegrate to be cleared by phagocytic leukocytes. After treatment with artemisinin derivatives some asexual parasites become temporarily dormant within their infected erythrocytes, and these may regrow after anti-malarial drug concentrations decline. Artemisinin resistance in P. falciparum reflects reduced ring stage susceptibility and manifests as slow parasite clearance. This is best assessed from the slope of the log-linear phase of parasitaemia reduction and is commonly measured as a parasite clearance half-life. Pharmacokinetic-pharmacodynamic modelling of anti-malarial drug effects on parasite clearance has proved useful in predicting therapeutic responses and in dose-optimization.

  9. Phagocytic Clearance in Neurodegeneration

    PubMed Central

    Sokolowski, Jennifer D.; Mandell, James W.

    2011-01-01

    The cellular and molecular mechanisms of phagocytic clearance of apoptotic cells and debris have been intensely studied in invertebrate model organisms and in the mammalian immune system. This evolutionarily conserved process serves multiple purposes. Uncleared debris from dying cells or aggregated proteins can be toxic and may trigger exaggerated inflammatory responses. Even though apoptotic cell death and debris accumulation are key features of neurodegenerative diseases, relatively little attention has been paid to this important homeostatic function in the central nervous system (CNS). This review attempts to summarize our knowledge of phagocytic clearance in the CNS, with a focus on retinal degeneration, forms of which are caused by mutations in genes within known phagocytic pathways, and on Alzheimer's disease (AD). Interest in phagocytic clearance mechanisms in AD was stimulated by the discovery that immunization could promote phagocytic clearance of amyloid-β; however, much less is known about clearance of neuronal and synaptic corpses in AD and other neurodegenerative diseases. Because the regulation of phagocytic activity is intertwined with cytokine signaling, this review also addresses the relationships among CNS inflammation, glial responses, and phagocytic clearance. PMID:21435432

  10. Advanced Thermal HPT Clearance Control

    NASA Technical Reports Server (NTRS)

    WojciechVoytek, Sak

    2006-01-01

    OBJECTIVE: Develop a fast acting HPT Active Clearance Control System to improve engine efficiency and reduce emissions CHALLENGE: Reduction of HPT blade clearance throughout engine operation System complexity, reliability and cost must remain comparable or surpass today s engines Reduced clearance may increase possibility of rubs

  11. Site clearance working group

    SciTech Connect

    1997-03-01

    The Gulf of Mexico and Louisiana continue to be areas with a high level of facility removal, and the pace of removal is projected to increase. Regulations were promulgated for the Gulf of Mexico and Louisiana requiring that abandoned sites be cleared of debris that could interfere with fishing and shrimping activities. The site clearance regulations also required verification that the sites were clear. Additionally, government programs were established to compensate fishermen for losses associated with snagging their equipment on oil and gas related objects that remained on the water bottoms in areas other than active producing sites and sites that had been verified as clear of obstructions and snags. The oil and gas industry funds the compensation programs. This paper reviews the regulations and evolving operating practices in the Gulf of Mexico and Louisiana where site clearance and fisherman`s gear compensation regulations have been in place for a number of years. Although regulations and guidelines may be in place elsewhere in the world, this paper focuses on the Gulf of Mexico and Louisiana. Workshop participants are encouraged to bring up international issues during the course of the workshop. Additionally, this paper raises questions and focuses on issues that are of concern to the various Gulf of Mexico and Louisiana water surface and water bottom stakeholders. This paper does not have answers to the questions or issues. During the workshop participants will debate the questions and issues in an attempt to develop consensus opinions and/or make suggestions that can be provided to the appropriate organizations, both private and government, for possible future research or policy adjustments. Site clearance and facility removal are different activities. Facility removal deals with removal of the structures used to produce oil and gas including platforms, wells, casing, piles, pipelines, well protection structures, etc.

  12. Clearance of Apoptotic Photoreceptors

    PubMed Central

    Hisatomi, Toshio; Sakamoto, Taiji; Sonoda, Koh-hei; Tsutsumi, Chikako; Qiao, Hong; Enaida, Hiroshi; Yamanaka, Ichiro; Kubota, Toshiaki; Ishibashi, Tatsuro; Kura, Shinobu; Susin, Santos A.; Kroemer, Guido

    2003-01-01

    The effective phagocytotic clearance of apoptotic debris is fundamental to the maintenance of neural tissues during apoptosis. Retinal photoreceptors undergo apoptosis after retinal detachment. Although their induction phase of apoptosis has been well discussed, their phagocytotic process remains quite unclear. We herein demonstrate that apoptotic photoreceptors are selectively eliminated from their physiological localization, the outer nuclear layer, to the subretinal space, and then phagocytosed by monocyte-derived macrophages. This could be shown by an ultrastructural and immunophenotypic analysis. Moreover, in chimera mice expressing transgenic green fluorescent protein in bone marrow-derived cells, the local infiltration of macrophages could be detected after retinal detachment-induced photoreceptor apoptosis. The local injection of an antibody blocking the phosphatidylserine receptor (PSR) or a peptide (GRGDSP)-blocking integrin αvβ3 revealed that phagocytotic clearance involves the PSR as well as integrin αvβ3 in vivo. Importantly, the level of blockade obtained with these reagents was different. Although anti-PSR increased the frequency of apoptotic cells that fail to bind to macrophages, GRGDSP prevented the engulfment (but not the recognition) of apoptotic photoreceptor cells by macrophages. To our knowledge, this is the first report describing the mechanisms through which apoptotic photoreceptors are selectively eliminated via a directional process in the subretinal space. PMID:12759244

  13. Radial Clearance of Antifriction Bearings,

    DTIC Science & Technology

    The article concerns in detail the radial clearance of different antifriction bearings which belong to important parameters which influence the...longevity of the bearing to a certain extent. The effect of the influence of assembly and the wear on the radial clearance of different bearings, the...antifriction bearings operate and their respect in clearance and assembly can contribute substantially to decreasing the daily disproportionate bearing consumption for the repair and maintenance of different machines. (Author)

  14. Turbomachinery Clearance Control

    NASA Technical Reports Server (NTRS)

    Chupp, Raymond E.; Hendricks, Robert C.; Lattime, Scott B.; Steinetz, Bruce M.; Aksit, Mahmut F.

    2007-01-01

    Controlling interface clearances is the most cost effective method of enhancing turbomachinery performance. Seals control turbomachinery leakages, coolant flows and contribute to overall system rotordynamic stability. In many instances, sealing interfaces and coatings are sacrificial, like lubricants, giving up their integrity for the benefit of the component. They are subjected to abrasion, erosion, oxidation, incursive rubs, foreign object damage (FOD) and deposits as well as extremes in thermal, mechanical, aerodynamic and impact loadings. Tribological pairing of materials control how well and how long these interfaces will be effective in controlling flow. A variety of seal types and materials are required to satisfy turbomachinery sealing demands. These seals must be properly designed to maintain the interface clearances. In some cases, this will mean machining adjacent surfaces, yet in many other applications, coatings are employed for optimum performance. Many seals are coating composites fabricated on superstructures or substrates that are coated with sacrificial materials which can be refurbished either in situ or by removal, stripping, recoating and replacing until substrate life is exceeded. For blade and knife tip sealing an important class of materials known as abradables permit blade or knife rubbing without significant damage or wear to the rotating element while maintaining an effective sealing interface. Most such tip interfaces are passive, yet some, as for the high-pressure turbine (HPT) case or shroud, are actively controlled. This work presents an overview of turbomachinery sealing. Areas covered include: characteristics of gas and steam turbine sealing applications and environments, benefits of sealing, types of standard static and dynamics seals, advanced seal designs, as well as life and limitations issues.

  15. 30 CFR 57.11010 - Stairstep clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Stairstep clearance. 57.11010 Section 57.11010... Escapeways Travelways-Surface and Underground § 57.11010 Stairstep clearance. Vertical clearance above stair... to indicate an impaired clearance....

  16. 30 CFR 57.11008 - Restricted clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Restricted clearance. 57.11008 Section 57.11008... Escapeways Travelways-Surface and Underground § 57.11008 Restricted clearance. Where restricted clearance creates a hazard to persons, the restricted clearance shall be conspicuously marked....

  17. 30 CFR 56.11010 - Stairstep clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Stairstep clearance. 56.11010 Section 56.11010... Stairstep clearance. Vertical clearance above stair steps shall be a minimum of seven feet, or suitable warning signs or similar devices shall be provided to indicate an impaired clearance....

  18. 30 CFR 56.11008 - Restricted clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Restricted clearance. 56.11008 Section 56.11008 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Restricted clearance. Where restricted clearance creates a hazard to persons, the restricted clearance...

  19. 2011 Report on Security Clearance Determinations

    DTIC Science & Technology

    2012-01-01

    Clearance Determinations 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK...Report on Security Clearance Determinations TABLE OF CONTENTS Table of Contents...security clearance as of October 1, 201 1, categorized by government employees and contractors and by security clearance level

  20. 14 CFR 25.925 - Propeller clearance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.925 Propeller clearance. Unless smaller... clearance between the blade tips and the airplane structure, plus any additional radial clearance necessary... blades or cuffs and stationary parts of the airplane; and (3) Positive clearance between other...

  1. 14 CFR 25.925 - Propeller clearance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.925 Propeller clearance. Unless smaller... clearance between the blade tips and the airplane structure, plus any additional radial clearance necessary... blades or cuffs and stationary parts of the airplane; and (3) Positive clearance between other...

  2. Effectively Managing Copyright Clearance: Electronic Reserves in a Large Distance Education University

    ERIC Educational Resources Information Center

    Wang, Yu-Hsiu; Baker, Megan

    2013-01-01

    This paper describes the automated copyright clearance process for electronic reserves materials by the electronic reserves staff at the Information and Library Services (ILS), at the University of Maryland University College (UMUC). Besides the standard practice to handle and post required course readings in digital format for UMUC's distance…

  3. Effectively Managing Copyright Clearance: Electronic Reserves in a Large Distance Education University

    ERIC Educational Resources Information Center

    Wang, Yu-Hsiu; Baker, Megan

    2013-01-01

    This paper describes the automated copyright clearance process for electronic reserves materials by the electronic reserves staff at the Information and Library Services (ILS), at the University of Maryland University College (UMUC). Besides the standard practice to handle and post required course readings in digital format for UMUC's distance…

  4. Myeloid cell turnover and clearance

    PubMed Central

    Janssen, William J.; Bratton, Donna L.; Jakubzick, Claudia V.; Henson, Peter M.

    2016-01-01

    Given the dual and intrinsically contradictory roles for myeloid cells in both protective and yet also damaging effects of inflammatory and immunological processes we suggest that it is important to consider the mechanisms and circumstances by which these cells are removed, either in the normal unchallenged state or during inflammation or disease. In this essay we address these subjects from a conceptual perspective, focusing as examples on four main myeloid cell types (neutrophils, monocytes, macrophages and myeloid dendritic cells) and their clearance from the circulation or from naïve and inflamed tissues. While the primary clearance process appears to involve endocytic uptake into macrophages, various tissue cell types can also recognize and remove dying cells though their overall quantitative contribution is unclear. In fact, surprisingly, given the wealth of study in this area over the last 30 years, our conclusion is that we are still challenged with substantial lack of mechanistic and regulatory understanding of when, how and by what mechanisms migratory myeloid cells come to die, are recognized as needing to be removed and indeed the precise processes of uptake of either the intact or fragmented cells. This reflects the extreme complexity and inherent redundancy of the clearance processes and argues for substantial investigative effort in this arena. In addition, it leads us to a sense that approaches to significant therapeutic modulation of selective myeloid clearance is still a long way off. PMID:27837740

  5. Clearance of von Willebrand factor.

    PubMed

    Denis, Cécile V; Christophe, Olivier D; Oortwijn, Beatrijs D; Lenting, Peter J

    2008-02-01

    The life cycle of von Willebrand factor (VWF) comprises a number of distinct steps, ranging from the controlled expression of the VWF gene in endothelial cells and megakaryocytes to the removal of VWF from the circulation. The various aspects of VWF clearance have been the objects of intense research in the last few years, stimulated by observations that VWF clearance is a relatively common component of the pathogenesis of type 1 von Willebrand disease (VWD). Moreover, improving the survival of VWF is now considered as a viable therapeutic strategy to prolong the half-life of factor VIII in order to optimise treatment of haemophilia A. The present review aims to provide an overview of recent findings with regard to the molecular basis of VWF clearance. A number of parameters have been identified that influence VWF clearance, including its glycosylation profile and a number of VWF missense mutations. In addition, in-vivo studies have been used to identify cells that contribute to the catabolism of VWF, providing a starting point for the identification of receptors that mediate the cellular uptake of VWF. Finally, we discuss recent data describing chemically modification of VWF as an approach to prolong the half-life of the VWF/FVIII complex.

  6. Manually calculated oesophageal bolus clearance time increases in parallel with reflux severity at impedance-pH monitoring.

    PubMed

    de Bortoli, Nicola; Martinucci, Irene; Savarino, Edoardo V; Frazzoni, Marzio; Tutuian, Radu; Tolone, Salvatore; Piaggi, Paolo; Furnari, Manuele; Russo, Salvatore; Bertani, Lorenzo; Macchia, Lorenzo; Savarino, Vincenzo; Marchi, Santino

    2015-12-01

    Oesophageal clearance has been scarcely studied. Oesophageal clearance in endoscopy-negative heartburn was assessed to detect differences in bolus clearance time among patients sub-grouped according to impedance-pH findings. In 118 consecutive endoscopy-negative heartburn patients impedance-pH monitoring was performed off-therapy. Acid exposure time, number of refluxes, baseline impedance, post-reflux swallow-induced peristaltic wave index and both automated and manual bolus clearance time were calculated. Patients were sub-grouped into pH/impedance positive (abnormal acid exposure and/or number of refluxes) and pH/impedance negative (normal acid exposure and number of refluxes), the former further subdivided on the basis of abnormal/normal acid exposure time (pH+/-) and abnormal/normal number of refluxes (impedance+/-). Poor correlation (r=0.35) between automated and manual bolus clearance time was found. Manual bolus clearance time progressively decreased from pH+/impedance+ (42.6s), pH+/impedance- (27.1s), pH-/impedance+ (17.8s) to pH-/impedance- (10.8s). There was an inverse correlation between manual bolus clearance time and both baseline impedance and post-reflux swallow-induced peristaltic wave index, and a direct correlation between manual bolus clearance and acid exposure time. A manual bolus clearance time value of 14.8s had an accuracy of 93% to differentiate pH/impedance positive from pH/impedance negative patients. When manually measured, bolus clearance time reflects reflux severity, confirming the pathophysiological relevance of oesophageal clearance in reflux disease. Copyright © 2015 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

  7. Noninvasive clearance of airway secretions.

    PubMed

    Hardy, K A; Anderson, B D

    1996-06-01

    Airway clearance techniques are indicated for specific diseases that have known clearance abnormalities (Table 2). Murray and others have commented that such techniques are required only for patients with a daily sputum production of greater than 30 mL. The authors have observed that patients with diseases known to cause clearance abnormalities can have sputum clearance with some techniques, such as positive expiratory pressure, autogenic drainage, and active cycle of breathing techniques, when PDPV has not been effective. Hasani et al has shown that use of the forced exhalatory technique in patients with nonproductive cough still resulted in movement of secretions proximally from all regions of the lung in patients with airway obstruction. It is therefore reasonable to consider airway clearance techniques for any patient who has a disease known to alter mucous clearance, including CF, dyskinetic cilia syndromes, and bronchiectasis from any cause. Patients with atelectasis from mucous plugs and hypersecretory states, such as asthma and chronic bronchitis, patients with pain secondary to surgical procedures, and patients with neuromuscular disease, weak cough, and abnormal patency of the airway may also benefit from the application of airway clearance techniques. Infants and children up to 3 years of age with airway clearance problems need to be treated with PDPV. Manual percussion with hands alone or a flexible face mask or cup and small mechanical vibrator/percussors, such as the ultrasonic devices, can be used. The intrapulmonary percussive ventilator shows growing promise in this area. The high-frequency oscillator is not supplied with vests of appropriate sizes for tiny babies and has not been studied in this group. Young patients with neuromuscular disease may require assisted ventilation and airway oscillations can be applied. CPAP alone has been shown to improve achievable flow rates that will increase air-liquid interactions for patients with these diseases

  8. Microwave Blade Tip Clearance System: An Update

    NASA Technical Reports Server (NTRS)

    Geisheimer, Jon

    2006-01-01

    Newer engines use compressor bleed air and a model to close clearances open loop. Measuring clearances and closing the control loop can add additional efficiencies. Tip clearance control has been identified as a key technology for future engines Additional benefits in prognostics, NSMS, and condition-based maintenance. In the HPT for every 1 mil improvement in clearance: a) SFC decreases 0.1%; and b) EGT margin increases 1 C.

  9. Security Clearances: Consideration of Sexual Orientation in the Clearance Process.

    DTIC Science & Technology

    1995-03-01

    Until about 1991, when agencies began to change their security policies and practices regarding sexual orientation, there were a number of documented...cases where defense civilian or contractor employees’ security clearances were denied or revoked because of their sexual orientation. However our...forward and discuss their cases. Notwithstanding these limitations, our work disclosed no evidence that sexual orientation has been used as a criterion

  10. Removal - An alternative to clearance

    SciTech Connect

    Feinhals, J.; Kelch, A.; Kunze, V.

    2007-07-01

    This presentation shows the differences between the application of clearance and removal, both being procedures for materials leaving radiation protection areas permanently. The differentiation will be done on the basis of the German legislation but may be also applicable for other national legislation. For clearance in Germany two basic requirements must be given, i.e. that the materials are activated or contaminated and that they result from the licensed use or can be assigned to the scope of the license. Clearance needs not to be applied to objects in Germany which are to be removed only temporarily from controlled areas with the purpose of repair or reuse in other controlled areas. In these cases only the requirements of contamination control apply. In the case of removal it must either be proved by measurements that the relevant materials are neither activated nor contaminated or that the materials result from areas where activation or contamination is impossible due to the operational history considering operational procedures and events. If the material is considered neither activated nor contaminated there is no need for a clearance procedure. Therefore, these materials can be removed from radiation protection areas and the removal is in the responsibility of the licensee. Nevertheless, the removal procedure and the measuring techniques to be applied for the different types of materials need an agreement from the competent authority. In Germany a maximum value of 10% of the clearance values has been established in different licenses as a criterion for the application of removal. As approximately 2/3 of the total mass of a nuclear power plant is not expected to be contaminated or activated there is a need for such a procedure of removal for this non contaminated material without any regulatory control especially in the case of decommissioning. A remarkable example is NPP Stade where in the last three years more than 8600 Mg were disposed of by removal and

  11. 30 CFR 18.24 - Electrical clearances.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electrical clearances. 18.24 Section 18.24... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor...

  12. 30 CFR 18.24 - Electrical clearances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical clearances. 18.24 Section 18.24... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor...

  13. 29 CFR 1917.113 - Clearance heights.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Clearance heights. 1917.113 Section 1917.113 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.113 Clearance heights. Clearance heights shall...

  14. 29 CFR 1917.113 - Clearance heights.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Clearance heights. 1917.113 Section 1917.113 Labor... (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.113 Clearance heights. Clearance heights shall be prominently posted where the height is insufficient for vehicles and equipment. ...

  15. 22 CFR 16.6 - Security clearances.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Security clearances. 16.6 Section 16.6 Foreign Relations DEPARTMENT OF STATE PERSONNEL FOREIGN SERVICE GRIEVANCE SYSTEM § 16.6 Security clearances. The agencies shall use their best endeavors to expedite security clearances whenever necessary to ensure a fair...

  16. 22 CFR 16.6 - Security clearances.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Security clearances. 16.6 Section 16.6 Foreign Relations DEPARTMENT OF STATE PERSONNEL FOREIGN SERVICE GRIEVANCE SYSTEM § 16.6 Security clearances. The agencies shall use their best endeavors to expedite security clearances whenever necessary to ensure a...

  17. 22 CFR 16.6 - Security clearances.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Security clearances. 16.6 Section 16.6 Foreign Relations DEPARTMENT OF STATE PERSONNEL FOREIGN SERVICE GRIEVANCE SYSTEM § 16.6 Security clearances. The agencies shall use their best endeavors to expedite security clearances whenever necessary to ensure a...

  18. 22 CFR 16.6 - Security clearances.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Security clearances. 16.6 Section 16.6 Foreign Relations DEPARTMENT OF STATE PERSONNEL FOREIGN SERVICE GRIEVANCE SYSTEM § 16.6 Security clearances. The agencies shall use their best endeavors to expedite security clearances whenever necessary to ensure a...

  19. 30 CFR 18.24 - Electrical clearances.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electrical clearances. 18.24 Section...

  20. 30 CFR 18.24 - Electrical clearances.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electrical clearances. 18.24 Section...

  1. 30 CFR 18.24 - Electrical clearances.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction and Design Requirements § 18.24 Electrical clearances. Minimum clearances between uninsulated electrical conductor... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electrical clearances. 18.24 Section...

  2. 14 CFR 23.925 - Propeller clearance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., an airplane with an aft mounted propeller must be designed such that the propeller will not contact...) Structural clearance. There must be— (1) At least one inch radial clearance between the blade tips and the... least one-half inch longitudinal clearance between the propeller blades or cuffs and stationary parts...

  3. 14 CFR 23.925 - Propeller clearance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., an airplane with an aft mounted propeller must be designed such that the propeller will not contact...) Structural clearance. There must be— (1) At least one inch radial clearance between the blade tips and the... least one-half inch longitudinal clearance between the propeller blades or cuffs and stationary parts...

  4. 14 CFR 23.925 - Propeller clearance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Powerplant General § 23.925 Propeller...) Structural clearance. There must be— (1) At least one inch radial clearance between the blade tips and the... least one-half inch longitudinal clearance between the propeller blades or cuffs and stationary parts...

  5. 14 CFR 23.925 - Propeller clearance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Powerplant General § 23.925 Propeller...) Structural clearance. There must be— (1) At least one inch radial clearance between the blade tips and the... least one-half inch longitudinal clearance between the propeller blades or cuffs and stationary parts...

  6. Aerial Refueling Clearance Process Guide

    DTIC Science & Technology

    2014-08-21

    08-2014 2. REPORT TYPE Guidance Document 3. DATES COVERED 2008-2014 4. TITLE AND SUBTITLE Aerial Refueling Clearance Process Guide Attachment: Aerial...ATP-3.3.4.2 covers general operational procedures for AR and national/organizational SRDs cover data and procedures specific to their AR platforms...Receptacle, Probe/Drogue, and BDA Kit. 3.1.3 The items for assessment consideration cover several areas of interface for both the tanker and the

  7. Automation or De-automation

    NASA Astrophysics Data System (ADS)

    Gorlach, Igor; Wessel, Oliver

    2008-09-01

    In the global automotive industry, for decades, vehicle manufacturers have continually increased the level of automation of production systems in order to be competitive. However, there is a new trend to decrease the level of automation, especially in final car assembly, for reasons of economy and flexibility. In this research, the final car assembly lines at three production sites of Volkswagen are analysed in order to determine the best level of automation for each, in terms of manufacturing costs, productivity, quality and flexibility. The case study is based on the methodology proposed by the Fraunhofer Institute. The results of the analysis indicate that fully automated assembly systems are not necessarily the best option in terms of cost, productivity and quality combined, which is attributed to high complexity of final car assembly systems; some de-automation is therefore recommended. On the other hand, the analysis shows that low automation can result in poor product quality due to reasons related to plant location, such as inadequate workers' skills, motivation, etc. Hence, the automation strategy should be formulated on the basis of analysis of all relevant aspects of the manufacturing process, such as costs, quality, productivity and flexibility in relation to the local context. A more balanced combination of automated and manual assembly operations provides better utilisation of equipment, reduces production costs and improves throughput.

  8. Automation pilot

    NASA Technical Reports Server (NTRS)

    1983-01-01

    An important concept of the Action Information Management System (AIMS) approach is to evaluate office automation technology in the context of hands on use by technical program managers in the conduct of human acceptance difficulties which may accompany the transition to a significantly changing work environment. The improved productivity and communications which result from application of office automation technology are already well established for general office environments, but benefits unique to NASA are anticipated and these will be explored in detail.

  9. Prediction of drug clearance in children.

    PubMed

    Foissac, Frantz; Bouazza, Naïm; Valade, Elodie; De Sousa Mendes, Mailys; Fauchet, Floris; Benaboud, Sihem; Hirt, Déborah; Tréluyer, Jean-Marc; Urien, Saïk

    2015-07-01

    The pediatric population is often exposed to drugs without sufficient knowledge about pharmacokinetics. The prediction of accurate clearance values in children, especially in neonates and infants, will improve the rational in dosing decisions. Drug clearances from birth to adulthood were compiled after a systematic review of pharmacokinetic reports. The analysis was performed using NONMEM. Clearance predictions were then evaluated by external validation. Prediction errors were also compared with those obtained from weight-based allometric scaling and physiologically based clearance (PBCL) models. For the analysis, 17 and 15 drugs were used for model building and external validation, respectively. A model based on the adult drug clearance value and taking into account both weight and age was retained. Age-related maturation of clearance reached 90% of the adult value within 1.5 years of life. For children less than 2 years old, allometric scaling alone systematically overestimated clearances. Accounting for age improved the clearance prediction in the 6 months-2 years age group (prediction error < 25%). Predictions obtained from the PBCL approach were close to our results. This analysis established a single equation using the adult clearance value as well as individual age and weight to predict drug clearance in children older than 6 months.

  10. Office automation.

    PubMed

    Arenson, R L

    1986-03-01

    By now, the term "office automation" should have more meaning for those readers who are not intimately familiar with the subject. Not all of the preceding material pertains to every department or practice, but certainly, word processing and simple telephone management are key items. The size and complexity of the organization will dictate the usefulness of electronic mail and calendar management, and the individual radiologist's personal needs and habits will determine the usefulness of the home computer. Perhaps the most important ingredient for success in the office automation arena relates to the ability to integrate information from various systems in a simple and flexible manner. Unfortunately, this is perhaps the one area that most office automation systems have ignored or handled poorly. In the personal computer world, there has been much emphasis recently on integration of packages such as spreadsheet, database management, word processing, graphics, time management, and communications. This same philosophy of integration has been applied to a few office automation systems, but these are generally vendor-specific and do not allow for a mixture of foreign subsystems. During the next few years, it is likely that a few vendors will emerge as dominant in this integrated office automation field and will stress simplicity and flexibility as major components.

  11. Techniques and Procedures for Route Clearance

    DTIC Science & Technology

    1996-03-01

    In response to the mme threal. in Bosnia, we haue included two articles with information on route- clearance techniques. The first article expands...Techniques and Procedures for Route Clearance By William C. Schneck, Jr. and Brian M. Green L and mines are the major threat to U.S. forces...learned many lessons about route clearance during the Vietnam War and had to relearn them a few years ago in Mogadishu, Somalia. While the U.S

  12. Elastic clearance change in axisymmetric shearing process

    NASA Astrophysics Data System (ADS)

    Yoshida, Yoshinori

    2016-10-01

    An axisymmetric shearing experiment is conducted for a sheet of low carbon steel and stainless steel. Elastic change in the clearance between punch and die is measured. The increase of the clearance in shearing is confirmed and the influence of sheared material's flow stress on the clearance change is shown. Finite element analysis (FEA) of shearing with Gurson-Tvergaard-Needlman model (GTN model) is conducted for shearing of the carbon steels with rigid tools as a numerical experiment. Burr height is predicted in the FEA and the result is compared with the experimental result. In addition, the influence of the clearance on stress state in the material is investigated.

  13. Habitat automation

    NASA Technical Reports Server (NTRS)

    Swab, Rodney E.

    1992-01-01

    A habitat, on either the surface of the Moon or Mars, will be designed and built with the proven technologies of that day. These technologies will be mature and readily available to the habitat designer. We believe an acceleration of the normal pace of automation would allow a habitat to be safer and more easily maintained than would be the case otherwise. This document examines the operation of a habitat and describes elements of that operation which may benefit from an increased use of automation. Research topics within the automation realm are then defined and discussed with respect to the role they can have in the design of the habitat. Problems associated with the integration of advanced technologies into real-world projects at NASA are also addressed.

  14. Automating Finance

    ERIC Educational Resources Information Center

    Moore, John

    2007-01-01

    In past years, higher education's financial management side has been riddled with manual processes and aging mainframe applications. This article discusses schools which had taken advantage of an array of technologies that automate billing, payment processing, and refund processing in the case of overpayment. The investments are well worth it:…

  15. 31 CFR 205.20 - What is a clearance pattern?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What is a clearance pattern? 205.20... Agreement § 205.20 What is a clearance pattern? States use clearance patterns to project when funds are paid... patterns meet the following standards: (a) A clearance pattern must be auditable. (b) A clearance pattern...

  16. 19 CFR 122.77 - Clearance certificate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Clearance certificate. 122.77 Section 122.77 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart; Electronic...

  17. 19 CFR 122.77 - Clearance certificate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Clearance certificate. 122.77 Section 122.77 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart;...

  18. 14 CFR 25.925 - Propeller clearance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... nose wheel landing gear) or nine inches (for each airplane with tail wheel landing gear) between each propeller and the ground with the landing gear statically deflected and in the level takeoff, or taxiing... the corresponding landing gear strut bottomed. (b) Water clearance. There must be a clearance of...

  19. Cardiopulmonary fitness and respirator clearance: an update.

    PubMed

    Belafsky, Sheri; Vlach, Justin; McCurdy, Stephen A

    2013-01-01

    This review addresses five key questions regarding respirator clearance: What is the efficacy of different methods of respirator clearance? Which diagnostic test is most predictive of cardiac event during respirator use? Is spirometry accurate in predicting respiratory distress/insufficiency during respirator use? Is exercise tolerance testing accurate in predicting cardiac injury during respirator use? Which periodicity of clearance evaluations is most protective against cardiac event during respirator use? The medical literature was searched using PubMed, the Cochrane Library, and Web of Science. Relevant articles were reviewed to assess current recommendations and practices in respirator clearance. Between the years 1970 and 2011, 144 articles were identified, and 21 were included in this review. Current recommendations for respirator clearance are based on consensus rather than outcome studies, and opinions differed between expert sources. Many authors observed the need for cost-effective respirator clearance, but none proposed evidence-based strategies. Prospective studies on respirator clearance that evaluate cardiac and pulmonary outcomes are necessary to establish an evidence base for improving the validity, efficiency, and consistency of respirator clearance testing.

  20. 19 CFR 122.77 - Clearance certificate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Clearance certificate. 122.77 Section 122.77 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart;...

  1. 19 CFR 122.77 - Clearance certificate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Clearance certificate. 122.77 Section 122.77 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart;...

  2. 19 CFR 122.77 - Clearance certificate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Clearance certificate. 122.77 Section 122.77 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart;...

  3. 14 CFR 25.925 - Propeller clearance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... following: (a) Ground clearance. There must be a clearance of at least seven inches (for each airplane with nose wheel landing gear) or nine inches (for each airplane with tail wheel landing gear) between each propeller and the ground with the landing gear statically deflected and in the level takeoff, or...

  4. AHERA CLEARANCE AT TWENTY ABATEMENT SITES

    EPA Science Inventory

    A study was conducted during the summer of 1988 to document Asbestos Hazard Emergency Response Act (AHERA) clearance air-sampling practices and clearance concentrations of airborne asbestos at 20 asbestos-abatement sites in New Jersey. Each abatement took place in a school buildi...

  5. 30 CFR 57.7028 - Hand clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand clearance. 57.7028 Section 57.7028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Drilling-Underground Only § 57.7028 Hand clearance. Persons shall not rest their hands on the chuck or...

  6. 30 CFR 57.7028 - Hand clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand clearance. 57.7028 Section 57.7028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Drilling-Underground Only § 57.7028 Hand clearance. Persons shall not rest their hands on the chuck or...

  7. 30 CFR 57.7018 - Hand clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand clearance. 57.7018 Section 57.7018 Mineral... Drilling-Surface Only § 57.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. Drilling—Underground Only ...

  8. 30 CFR 56.7018 - Hand clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand clearance. 56.7018 Section 56.7018 Mineral... Drilling § 56.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. ...

  9. 30 CFR 57.7018 - Hand clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand clearance. 57.7018 Section 57.7018 Mineral... Drilling-Surface Only § 57.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. Drilling—Underground Only ...

  10. 30 CFR 57.7018 - Hand clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand clearance. 57.7018 Section 57.7018 Mineral... Drilling-Surface Only § 57.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. Drilling—Underground Only ...

  11. 30 CFR 57.7028 - Hand clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand clearance. 57.7028 Section 57.7028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Drilling-Underground Only § 57.7028 Hand clearance. Persons shall not rest their hands on the chuck or...

  12. 30 CFR 57.7028 - Hand clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand clearance. 57.7028 Section 57.7028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Drilling-Underground Only § 57.7028 Hand clearance. Persons shall not rest their hands on the chuck or...

  13. 30 CFR 56.7018 - Hand clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand clearance. 56.7018 Section 56.7018 Mineral... Drilling § 56.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. ...

  14. 30 CFR 57.7018 - Hand clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand clearance. 57.7018 Section 57.7018 Mineral... Drilling-Surface Only § 57.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. Drilling—Underground Only ...

  15. 30 CFR 56.7018 - Hand clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand clearance. 56.7018 Section 56.7018 Mineral... Drilling § 56.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. ...

  16. 30 CFR 56.7018 - Hand clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand clearance. 56.7018 Section 56.7018 Mineral... Drilling § 56.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or rest their hands on the chuck or centralizer while drilling. ...

  17. 30 CFR 56.11010 - Stairstep clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Stairstep clearance. 56.11010 Section 56.11010 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... warning signs or similar devices shall be provided to indicate an impaired clearance....

  18. 30 CFR 56.11010 - Stairstep clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Stairstep clearance. 56.11010 Section 56.11010 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... warning signs or similar devices shall be provided to indicate an impaired clearance....

  19. Intelligent Engine Systems: HPT Clearance Control

    NASA Technical Reports Server (NTRS)

    2008-01-01

    The Advanced Thermally Actuated Clearance Control System underwent several studies. Improved flow path isolation quantified what can be gained by making the HPT case nearly adiabatic. The best method of heat transfer was established, and finally two different borrowed air cooling circuits were evaluated to be used for the HPT Active Clearance Control System.

  20. Clearance of materials from accelerator facilities

    NASA Astrophysics Data System (ADS)

    Rokni, Sayed H.; Davis, Scott L.; Ford, Ryan; Liu, James C.; Marshall, Elaine; Schwahn, Scott O.; Welch, Keith

    2017-09-01

    A new Technical Standard that supports the clearance of materials and equipment (personal property) from U.S. Department of Energy (DOE) accelerator facilities has been developed. The Standard focuses on personal property that has the potential to be radiologically impacted by accelerator operations. It addresses material clearance programs and protocols for off-site releases without restriction on use. Common metals with potential volumetric activation are of main interest with technical bases provided in Appendices of the Standard. The clearance protocols in the Standard include three elements: 1) clearance criteria, 2) process knowledge, and 3) measurement methods. This paper presents the technical aspects of the new Standard, discusses operational experience gained in clearance of materials and equipment from several accelerator facilities at SLAC and examples as to how this Standard can be applied to benefit the entirety of the DOE Accelerator Complex.

  1. Nasal mucociliary clearance after radiation therapy.

    PubMed

    Stringer, S P; Stiles, W; Slattery, W H; Krumerman, J; Parsons, J T; Mendenhall, W M; Cassisi, N J

    1995-04-01

    Irradiation has been demonstrated to cause decreased mucociliary clearance in animal models. We sought to verify this effect clinically by using the saccharin transport test to evaluate nasal mucociliary clearance in 9 patients previously treated with radiation therapy to the nasal cavity. The patients also completed a questionnaire examining the prevalence of nasal symptoms before and after radiation therapy. Patients who received radiation therapy had no clearance of saccharin from the nasal cavity at a minimum of 20 minutes. The controls had a median clearance time of 5 minutes. The patients noted a higher prevalence of nasal congestion, drainage, and facial pain after radiation therapy. This study demonstrates that radiation therapy to the nasal cavity causes a decrease in nasal mucociliary clearance. This alteration should be considered when selecting therapy for malignancies in the nasal area.

  2. DOD Personnel Clearances. DOD Faces Multiple Challenges in Its Efforts to Improve Clearance Processes for Industry Personnel

    DTIC Science & Technology

    2008-02-13

    Services, House of Representatives DOD PERSONNEL CLEARANCES DOD Faces Multiple Challenges in Its Efforts to Improve Clearance Processes for Industry...Personnel Clearances . DOD Faces Multiple Challenges in Its Efforts to Improve Clearance Processes for Industry Personnel 5a. CONTRACT NUMBER 5b...Accountability Office Why GAO Did This Study Highlights Accountability Integrity Reliability February 13, 2008 DOD PERSONNEL CLEARANCES DOD Faces Multiple

  3. The measurement of dog gastric mucosal blood flow by radioactive aniline clearance compared with amidopyrine clearance

    PubMed Central

    Curwain, B. P.; Holton, Pamela

    1973-01-01

    1. Methods for the estimation of radioactive aniline in body fluids are described. The recovery of aniline added to blood, plasma and gastric juice was over 90% of the recovery from saline. 2. In the doses used aniline caused methaemoglobinaemia of 5-11% of total haemoglobin. No other effect was detected. Gastric secretion was also unaffected. 3. Aniline clearance increased in parallel with acid secretion from Heidenhain pouches in conscious dogs and in anaesthetized dogs. In conscious dogs the ratio of aniline clearance to acid secretion was significantly higher for histamine stimulation than for pentagastrin stimulation. 4. Aniline and amidopyrine clearances were compared simultaneously in the same dogs. Aniline clearance was about 80% of amidopyrine clearance. 5. The proportion of aniline bound to plasma proteins was measured by two methods and found to be 25%. When aniline clearance was corrected for plasma binding, aniline and amidopyrine clearances were equal. PMID:4689959

  4. Experimental studies on the effect of automation on pilot situational awareness in the datalink ATC environment

    NASA Technical Reports Server (NTRS)

    Hahn, Edward C.; Hansman, R. J., Jr.

    1992-01-01

    An experiment to study how automation, when used in conjunction with datalink for the delivery of ATC clearance amendments, affects the situational awareness of aircrews was conducted. The study was focused on the relationship of situational awareness to automated Flight Management System (FMS) programming of datalinked clearances and the readback of ATC clearances. Situational awareness was tested by issuing nominally unacceptable ATC clearances and measuring whether the error was detected by the subject pilots. The experiment also varied the mode of clearance delivery: Verbal, Textual, and Graphical. The error detection performance and pilot preference results indicate that the automated programming of the FMS may be superior to manual programming. It is believed that automated FMS programming may relieve some of the cognitive load, allowing pilots to concentrate on the strategic implications of a clearance amendment. Also, readback appears to have value, but the small sample size precludes a definite conclusion. Furthermore, because textual and graphical modes of delivery offer different but complementary advantages for cognitive processing, a combination of these modes of delivery may be advantageous in a datalink presentation.

  5. Advanced optical blade tip clearance measurement system

    NASA Technical Reports Server (NTRS)

    Ford, M. J.; Honeycutt, R. E.; Nordlund, R. E.; Robinson, W. W.

    1978-01-01

    An advanced electro-optical system was developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in an operating gas turbine engine. This system is applicable to fan, compressor, and turbine blade tip clearance measurement requirements, and the system probe is particularly suitable for operation in the extreme turbine environment. A study of optical properties of blade tips was conducted to establish measurement system application limitations. A series of laboratory tests was conducted to determine the measurement system's operational performance characteristics and to demonstrate system capability under simulated operating gas turbine environmental conditions. Operational and environmental performance test data are presented.

  6. Airway clearance therapy in cystic fibrosis patients.

    PubMed

    Pisi, Giovanna; Chetta, Alfredo

    2009-08-01

    Cystic fibrosis (CF) is the most common life-shortening inherited disease affecting Caucasian people. In CF, the major feature of lung disease is the retention of mucus due to impaired clearance of abnormally viscous airway secretions. Airway clearance techniques (ACTs) may significantly improve mucociliary clearance and gas exchange, thereby being of clinical benefit in reducing pulmonary complications in CF patients. ACTs include conventional chest physiotherapy, active cycle of breathing techniques, autogenic drainage, positive expiratory pressure and high-frequency chest compression. In order to suit the needs of patients, families and care-givers, ACTs need to be individually and continuously adapted.

  7. Compressor airfoil tip clearance optimization system

    DOEpatents

    Little, David A.; Pu, Zhengxiang

    2015-08-18

    A compressor airfoil tip clearance optimization system for reducing a gap between a tip of a compressor airfoil and a radially adjacent component of a turbine engine is disclosed. The turbine engine may include ID and OD flowpath boundaries configured to minimize compressor airfoil tip clearances during turbine engine operation in cooperation with one or more clearance reduction systems that are configured to move the rotor assembly axially to reduce tip clearance. The configurations of the ID and OD flowpath boundaries enhance the effectiveness of the axial movement of the rotor assembly, which includes movement of the ID flowpath boundary. During operation of the turbine engine, the rotor assembly may be moved axially to increase the efficiency of the turbine engine.

  8. Shear-Joint Capability Versus Bolt Clearance

    NASA Technical Reports Server (NTRS)

    Lee, H. M.

    1994-01-01

    NASA Technical Memorandum presents theoretical study of relationships between load-bearing capabilities of shear joints that comprise plates clamped together by multiple bolts and clearances between bolts and boltholes in those joints.

  9. Plasma Creatinine Clearance in the Dog

    ERIC Educational Resources Information Center

    Frazier, Loy W.

    1977-01-01

    Lists materials and methods for an experiment that demonstrates the concept of glomerular filtration rate (GFR) using anesthesized dogs. In the dog, GFR is equivalent to the renal plasma clearance of exogenous creatinine. (CS)

  10. 14 CFR 25.925 - Propeller clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... attitude, whichever is most critical. In addition, there must be positive clearance between the propeller and the ground when in the level takeoff attitude with the critical tire(s) completely deflated...

  11. Voltage-clearance recommendations for printed boards

    SciTech Connect

    Jennings, C W; Cave, G; Evans, A; Harrington, D J; Kirchenbaum, J; Martz, R E; Mierendorf, R C; Smith, G A

    1980-01-01

    Present and future trends in printed board designs point to higher circuit densities with narrower lines and closer spacings. Some designers are now laying out boards with 0.13 mm lines and spacings. The reduction of nominal spacing between conductive elements has raised questions concerning the adequacy of present voltage-clearance recommendations. The present recommendations are considered too conservative in that they are weighted with large safety factors, especially for small clearances, and are frequently disregarded by many designers. Published voltage breakdown measurements made on printed boards with comb patterns with their enhanced conductor test lengths show breakdowns occurring at much higher voltages than those specified for the clearances in existing documents. A Task Group was set up to review published breakdown measurements and to make any additional measurements necessary to provide voltage-clearance recommendations. These recommendations are reported.

  12. Shear joint capability versus bolt clearance

    NASA Technical Reports Server (NTRS)

    Lee, H. M.

    1992-01-01

    The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

  13. Airway-clearance therapy guidelines and implementation.

    PubMed

    Lester, Mary K; Flume, Patrick A

    2009-06-01

    The clearance of secretions from the lungs of patients with cystic fibrosis (CF) is an important component in the fight to preserve their lung function. There is excessive inflammation in the airways of these patients, which is thought to be exaggerated by ineffective mucociliary clearance and bacterial infection. In 2005 the Cystic Fibrosis Foundation formed the Pulmonary Therapies Committee to review all of the medical literature on the various airway-clearance therapies used in treating CF lung disease. The recommendations were: an airway-clearance therapy should be performed by all patients with CF, no form of airway-clearance therapy stood out as being superior to another, and that patients may express a preference of one therapy over another. They also concluded that aerobic exercise is beneficial to patients with CF, as it is to everyone, and that exercise should be a component to the overall health routine of patients with CF. The challenge for respiratory and physical therapists together with the patient/family is to develop a plan of attack through the use of various airway-clearance therapies. The respiratory and physical therapists are integral in helping patients and families develop airway-clearance routines that aid in the removal of the secretions that cause airway obstruction. There is a wide range of airway-clearance therapies that therapists can choose from when they are teaching the patients and family members the strategies of secretion removal. The questions are: What therapy is best for what age or stage of lung disease? What therapies will the patient do? And which therapies will be covered by medical insurance? These are all fundamental questions that must be answered when guiding families in finding therapies that are effective and appropriate for each CF patient's unique situation.

  14. [A renal function analysis using computed tomography. CT clearance versus 131I-hippuran clearance].

    PubMed

    Kaltenborn, H; Klose, K

    1992-06-01

    The CT clearance in a number of urological patients (39 patients, 25 with normal renal function) was studied by means of an "area under curve" (AUC) method, using a region of interest. 31 patients were given meglumine ioxithalamate and 8 patients Iopamidol as a contrast medium. Both for total and partial function there was highly significant correlation with isotope clearance with good reproducibility. The difference in the pharmacokinetics of the contrast media affected the absolute clearance values.

  15. ADAPTIVE CLEARANCE CONTROL SYSTEMS FOR TURBINE ENGINES

    NASA Technical Reports Server (NTRS)

    Blackwell, Keith M.

    2004-01-01

    The Controls and Dynamics Technology Branch at NASA Glenn Research Center primarily deals in developing controls, dynamic models, and health management technologies for air and space propulsion systems. During the summer of 2004 I was granted the privilege of working alongside professionals who were developing an active clearance control system for commercial jet engines. Clearance, the gap between the turbine blade tip and the encompassing shroud, increases as a result of wear mechanisms and rubbing of the turbine blades on shroud. Increases in clearance cause larger specific fuel consumption (SFC) and loss of efficient air flow. This occurs because, as clearances increase, the engine must run hotter and bum more fuel to achieve the same thrust. In order to maintain efficiency, reduce fuel bum, and reduce exhaust gas temperature (EGT), the clearance must be accurately controlled to gap sizes no greater than a few hundredths of an inch. To address this problem, NASA Glenn researchers have developed a basic control system with actuators and sensors on each section of the shroud. Instead of having a large uniform metal casing, there would be sections of the shroud with individual sensors attached internally that would move slightly to reform and maintain clearance. The proposed method would ultimately save the airline industry millions of dollars.

  16. Controls Considerations for Turbine Active Clearance Control

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.

    2004-01-01

    This presentation discusses active control of turbine tip clearance from a control systems perspective. It is a subset of charts that were presented at the 2003 meeting of the International Society of Air Breathing Engines which was held August 31 through September 5 in Cleveland, Ohio. The associated reference paper is cited at the end of the presentation. The presentation describes active tip clearance control research being conducted by NASA to improve turbine engine systems. The target application for this effort is commercial aircraft engines. However, it is believed that the technologies developed as part of this research will benefit a broad spectrum of current and future turbomachinery. The first part of the presentation discusses the concept of tip clearance, problems associated with it, and the benefits of controlling it. It lays out a framework for implementing tip clearance controls that enables the implementation to progress from purely analytical to hardware-in-the-loop to fully experimental. And it briefly discusses how the technologies developed will be married to the previously described ACC Test Rig for hardware-in-the-loop demonstrations. The final portion of the presentation, describes one of the key technologies in some detail by presenting equations and results for a functional dynamic model of the tip clearance phenomena. As shown, the model exhibits many of the clearance dynamics found in commercial gas turbine engines. However, initial attempts to validate the model identified limitations that are being addressed to make the model more realistic.

  17. The evidence for secretion clearance techniques.

    PubMed

    Hess, D R

    2001-11-01

    Many acute and chronic respiratory diseases are associated with increased respiratory secretions in the airways. Narrative reviews and a few systematic reviews of secretion clearance techniques have been published. These reviews raise concerns regarding the lack of evidence to support the various secretion clearance techniques. I conducted a comprehensive MEDLINE search of the following subjects: chest physical therapy, chest physiotherapy, postural drainage, forced expiratory technique, autogenic drainage, high-frequency chest wall compression, flutter device and secretions, positive expiratory pressure and secretions, intrapulmonary percussion, mechanical in-exsufflation and secretions. This was followed by a comprehensive search of cross-references to identify additional studies. The results of this review are reported herein. There are a number of methodological limitations of the literature reporting studies of the use of secretion clearance techniques. Most of the studies were small, most used crossover designs, and few used sham therapy. Many studies were limited to short-term outcomes such as sputum clearance with a single treatment session. Despite the clinical observation that retained secretions are detrimental to respiratory function and despite anecdotal associations between secretion clearance and improvements in respiratory function, there is a dearth of high-level evidence to support any secretion clearance technique.

  18. 48 CFR 945.603-70 - Plant clearance function.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Plant clearance function... Plant clearance function. If the plant clearance function has not been formally delegated to another Federal agency, the contracting officer shall assume all responsibilities of the plant clearance...

  19. 32 CFR 644.517 - Clearance of Army lands.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Clearance of Army lands. 644.517 Section 644.517... ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed Excess Land and Improvements § 644.517 Clearance of Army lands. The responsibility for performing clearance...

  20. 32 CFR 644.517 - Clearance of Army lands.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Clearance of Army lands. 644.517 Section 644.517... ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed Excess Land and Improvements § 644.517 Clearance of Army lands. The responsibility for performing clearance...

  1. 32 CFR 644.517 - Clearance of Army lands.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Clearance of Army lands. 644.517 Section 644.517... ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed Excess Land and Improvements § 644.517 Clearance of Army lands. The responsibility for performing clearance...

  2. 32 CFR 644.517 - Clearance of Army lands.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Clearance of Army lands. 644.517 Section 644.517... ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed Excess Land and Improvements § 644.517 Clearance of Army lands. The responsibility for performing clearance...

  3. 48 CFR 245.7203 - Assigning plant clearance case numbers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Assigning plant clearance....7203 Assigning plant clearance case numbers. (a) Use a three-part, 11-character number constructed as... clearance number on DD Form 1635, Plant Clearance Case Register, or mechanized equivalent....

  4. 48 CFR 245.7202 - Establishing a plant clearance case.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... clearance case. 245.7202 Section 245.7202 Federal Acquisition Regulations System DEFENSE ACQUISITION....7202 Establishing a plant clearance case. (a) Upon receipt of an acceptable inventory schedule or a DD Form 1342, DoD Property Record, the plant clearance officer shall establish a plant clearance case...

  5. 48 CFR 945.603-70 - Plant clearance function.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Plant clearance function... Plant clearance function. If the plant clearance function has not been formally delegated to another Federal agency, the contracting officer shall assume all responsibilities of the plant clearance...

  6. 48 CFR 945.603-70 - Plant clearance function.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Plant clearance function... Plant clearance function. If the plant clearance function has not been formally delegated to another Federal agency, the contracting officer shall assume all responsibilities of the plant clearance officer...

  7. 48 CFR 801.602-76 - Business clearance review.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Business clearance review... Authority, and Responsibilities 801.602-76 Business clearance review. (a) A business clearance review is a... obtain a business clearance review prior to award of any contract, task or delivery order, or blanket...

  8. 48 CFR 801.602-76 - Business clearance review.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Business clearance review... Authority, and Responsibilities 801.602-76 Business clearance review. (a) A business clearance review is a... obtain a business clearance review prior to award of any contract, task or delivery order, or blanket...

  9. 48 CFR 801.602-76 - Business clearance review.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Business clearance review... Authority, and Responsibilities 801.602-76 Business clearance review. (a) A business clearance review is a... obtain a business clearance review prior to award of any contract, task or delivery order, or blanket...

  10. Lower metabolic clearance of tizanidine in Japanese subjects.

    PubMed

    Momo, Kenji; Homma, Masato; Kohda, Yukinao

    2013-12-01

    Our aim was to determine whether metabolic clearance, renal clearance, or both elimination pathways contribute to ethnic differences in tizanidine clearance, which is ~ 2-fold higher in Caucasians than in Asians. The pharmacokinetic parameters of tizanidine in 9 healthy male Japanese subjects were compared with those of Caucasians in previous studies. Metabolic clearance of tizanidine was lower in Japanese than in Caucasian subjects (5.9 vs. 8.1 - 10.9 l/h/kg), although renal clearances were similar (0.040 vs. 0.047 - 0.055 l/h/kg). The results suggest that ethnic differences in tizanidine clearance are due to differences in metabolic clearance.

  11. Cystic fibrosis pulmonary guidelines: airway clearance therapies.

    PubMed

    Flume, Patrick A; Robinson, Karen A; O'Sullivan, Brian P; Finder, Jonathan D; Vender, Robert L; Willey-Courand, Donna-Beth; White, Terry B; Marshall, Bruce C

    2009-04-01

    Cystic fibrosis (CF) is a genetic disease characterized by dehydration of airway surface liquid and impaired mucociliary clearance. As a result, there is difficulty clearing pathogens from the lung, and patients experience chronic pulmonary infections and inflammation. Clearance of airway secretions has been a primary therapy for those with CF, and a variety of airway clearance therapies (ACTs) have been developed. Because ACTs are intrusive and require considerable time and effort, it is important that appropriate techniques are recommended on the basis of available evidence of efficacy and safety. Therefore, the Cystic Fibrosis Foundation established a committee to examine the clinical evidence for each therapy and provide guidance for their use. A systematic review was commissioned, which identified 7 unique reviews and 13 additional controlled trials that addressed one or more of the comparisons of interest and were deemed eligible for inclusion. Recommendations for use of the ACTs were made, balancing the quality of evidence and the potential harms and benefits. The committee determined that, although there is a paucity of controlled trials that assess the long-term effects of ACTs, the evidence quality overall for their use in CF is fair and the benefit is moderate. The committee recommends airway clearance be performed on a regular basis in all patients. There are no ACTs demonstrated to be superior to others, so the prescription of ACTs should be individualized. Aerobic exercise is recommended as an adjunctive therapy for airway clearance and for its additional benefits to overall health.

  12. Effects of airborne pollutants on mucociliary clearance

    SciTech Connect

    Wolff, R.K.

    1986-04-01

    The mucociliary clearance system is a first line of defense against inhaled agents, and so its compromise can adversely affect health. The purpose of this paper is to provide a review of data on the effect of in vivo air pollutant exposures on the clearance of test particles from airways. Data from both animals and humans are compared whenever possible, so that estimates of human health effects may be made. Mechanisms of action are also discussed, presenting the view that for low level exposures, changes in secretions are probably responsible for most observed changes in clearance. The pollutants pertinent to this review are those that are common in the environment and most likely to have impacts on large numbers of people: sulfur oxides, sulfuric acid mist, O/sub 3/, NO/sub 2/, particulates, diesel exhaust, and cigarette smoke.149 references.

  13. Effects of airborne pollutants on mucociliary clearance.

    PubMed Central

    Wolff, R K

    1986-01-01

    The mucociliary clearance system is a first line of defense against inhaled agents, and so its compromise can adversely affect health. The purpose of this paper is to provide a review of data on the effect of in vivo air pollutant exposures on the clearance of test particles from airways. Data from both animals and humans are compared whenever possible, so that estimates of human health effects may be made. Mechanisms of action are also discussed, presenting the view that for low level exposures, changes in secretions are probably responsible for most observed changes in clearance. The pollutants pertinent to this review are those that are common in the environment and most likely to have impacts on large numbers of people: sulfur oxides, sulfuric acid mist, O3, NO2, particulates, diesel exhaust, and cigarette smoke. Images FIGURE 1. FIGURE 2. a FIGURE 2. b FIGURE 4. PMID:3519203

  14. Predicting Clearance Mechanism in Drug Discovery: Extended Clearance Classification System (ECCS).

    PubMed

    Varma, Manthena V; Steyn, Stefanus J; Allerton, Charlotte; El-Kattan, Ayman F

    2015-12-01

    Early prediction of clearance mechanisms allows for the rapid progression of drug discovery and development programs, and facilitates risk assessment of the pharmacokinetic variability associated with drug interactions and pharmacogenomics. Here we propose a scientific framework--Extended Clearance Classification System (ECCS)--which can be used to predict the predominant clearance mechanism (rate-determining process) based on physicochemical properties and passive membrane permeability. Compounds are classified as: Class 1A--metabolism as primary systemic clearance mechanism (high permeability acids/zwitterions with molecular weight (MW) ≤400 Da), Class 1B--transporter-mediated hepatic uptake as primary systemic clearance mechanism (high permeability acids/zwitterions with MW >400 Da), Class 2--metabolism as primary clearance mechanism (high permeability bases/neutrals), Class 3A--renal clearance (low permeability acids/zwitterions with MW ≤400 Da), Class 3B--transporter mediated hepatic uptake or renal clearance (low permeability acids/zwitterions with MW >400 Da), and Class 4--renal clearance (low permeability bases/neutrals). The performance of the ECCS framework was validated using 307 compounds with single clearance mechanism contributing to ≥70% of systemic clearance. The apparent permeability across clonal cell line of Madin - Darby canine kidney cells, selected for low endogenous efflux transporter expression, with a cut-off of 5 × 10(-6) cm/s was used for permeability classification, and the ionization (at pH7) was assigned based on calculated pKa. The proposed scheme correctly predicted the rate-determining clearance mechanism to be either metabolism, hepatic uptake or renal for ~92% of total compounds. We discuss the general characteristics of each ECCS class, as well as compare and contrast the framework with the biopharmaceutics classification system (BCS) and the biopharmaceutics drug disposition classification system (BDDCS

  15. Airway clearance techniques for bronchiectasis.

    PubMed

    Lee, Annemarie L; Burge, Angela; Holland, Anne E

    2013-05-31

    People with non-cystic fibrosis bronchiectasis commonly experience chronic cough and sputum production and these features may be associated with progressive decline in clinical status. Airway clearance techniques (ACTs) are often prescribed to facilitate expectoration of sputum from the lungs, but the efficacy of these techniques in a stable clinical state or during an acute exacerbation of bronchiectasis is unclear. Primary: to determine the effects of ACTs on the rate of acute exacerbations, incidence of hospitalisation and health-related quality of life in individuals with acute and stable bronchiectasis.Secondary: to determine whether a) ACTs are safe for individuals with acute and stable bronchiectasis and b) ACTs have beneficial effects on physiology and symptoms in individuals with acute and stable bronchiectasis. We searched the Cochrane Airways Group Specialised Register of trials from inception to October 2012, PEDro in October 2012 and handsearched relevant journals. Randomised controlled parallel and cross-over trials that compared an ACT to no treatment, sham ACT or directed coughing in participants with bronchiectasis. We used standard methodological procedures expected by The Cochrane Collaboration. Five studies involving 51 participants met the inclusion criteria of the review, all of which were cross-over design. Four studies were on adults with stable bronchiectasis, and the other study was on clinically stable children with bronchiectasis. Three studies were single treatment sessions, two were longer-term studies. The interventions varied and some control groups received a sham intervention while others were inactive. The methodological quality of the studies was variable and the studies were not able to blind participants and personal. Heterogeneity between studies precluded these data from meta-analysis and the review was therefore narrative.One study on 20 adults comparing an airway oscillatory device with no treatment found no significant

  16. Airway clearance techniques for bronchiectasis.

    PubMed

    Lee, Annemarie L; Burge, Angela T; Holland, Anne E

    2015-11-23

    People with non-cystic fibrosis bronchiectasis commonly experience chronic cough and sputum production, features that may be associated with progressive decline in clinical and functional status. Airway clearance techniques (ACTs) are often prescribed to facilitate expectoration of sputum from the lungs, but the efficacy of these techniques in a stable clinical state or during an acute exacerbation of bronchiectasis is unclear. Primary: to determine effects of ACTs on rates of acute exacerbation, incidence of hospitalisation and health-related quality of life (HRQoL) in individuals with acute and stable bronchiectasis. Secondary: to determine whether:• ACTs are safe for individuals with acute and stable bronchiectasis; and• ACTs have beneficial effects on physiology and symptoms in individuals with acute and stable bronchiectasis. We searched the Cochrane Airways Group Specialised Register of trials from inception to November 2015 and PEDro in March 2015, and we handsearched relevant journals. Randomised controlled parallel and cross-over trials that compared an ACT versus no treatment, sham ACT or directed coughing in participants with bronchiectasis. We used standard methodological procedures as expected by The Cochrane Collaboration. Seven studies involving 105 participants met the inclusion criteria of this review, six of which were cross-over in design. Six studies included adults with stable bronchiectasis; the other study examined clinically stable children with bronchiectasis. Three studies provided single treatment sessions, two lasted 15 to 21 days and two were longer-term studies. Interventions varied; some control groups received a sham intervention and others were inactive. The methodological quality of these studies was variable, with most studies failing to use concealed allocation for group assignment and with absence of blinding of participants and personnel for outcome measure assessment. Heterogeneity between studies precluded inclusion of

  17. Pharmacologic agents for mucus clearance in bronchiectasis.

    PubMed

    Nair, Girish B; Ilowite, Jonathan S

    2012-06-01

    There are no approved pharmacologic agents to enhance mucus clearance in non-cystic fibrosis (CF) bronchiectasis. Evidence supports the use of hyperosmolar agents in CF, and studies with inhaled mannitol and hypertonic saline are ongoing in bronchiectasis. N-acetylcysteine may act more as an antioxidant than a mucolytic in other lung diseases. Dornase α is beneficial to patients with CF, but is not useful in patients with non-CF bronchiectasis. Mucokinetic agents such as β-agonists have the potential to improve mucociliary clearance in normals and many disease states, but have not been adequately studied in patients with bronchiectasis. Copyright © 2012 Elsevier Inc. All rights reserved.

  18. Mucociliary clearance from the calf lung.

    PubMed Central

    Jones, C D

    1983-01-01

    Mucociliary clearance rate constants for ten calves were obtained using Technetium 99m-sulphur colloid complex. The mean rate constant measured at the lung for all calves was 0.012 (+/- 0.009) min-1 (half-life 58 minutes). The clearance rate constants obtained from measurements made at the larynx were higher (0.02 +/- 0.007 min-1), although not significantly higher, than those determined from measurements taken at the lung. The constants can be used to predict the particle burden on the lungs of calves kept under husbandry systems of varying air hygiene. Images Fig. 1. PMID:6640409

  19. [Dose and time dependency of "CT clearance"].

    PubMed

    Kaltenborn, H A; Klose, K J; Dexheimer, C; von Steinijans

    1989-06-01

    The contrast medium dose used in CT renal function analysis corresponds to about 1 ml/kg body weight at a measurement interval of 5 or 10 minutes. In the present study the dependence of "CT clearance" on dosage and time was examined in 12 healthy subjects. The amount of clearance was directly proportional to the employed contrast medium dose and to the length of the measurement interval. On account of the superior signal-to-noise ratio, the higher dose (1 ml/kg body weight) will continue to be preferred in future. The measurement interval can be limited to 10 minutes.

  20. 2015 Annual Report on Security Clearance Determinations

    DTIC Science & Technology

    2016-06-28

    Element of the Intelligence Community .................... 7 i. The time in days to process the shortest and longest security clearance determination...EXECUTIVE SUMMARY The Intelligence Authorization Act (IAA) for Fiscal Year (FY) 20101 requires the President to submit an annual Report on Security

  1. 29 CFR 1918.41 - Coaming clearances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... hatch beams and hatch covers are not protected by a coaming at least 24-inch (.61 m) high, a taut... athwartship hatch beams, and at both ends of those hatches with fore and aft hatch beams, before intermediate deck hatch covers and hatch beams are removed or replaced. Exception: The three-foot (.91 m) clearance...

  2. 30 CFR 56.7018 - Hand clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7018 Hand clearance. Persons shall not hold the drill steel while collaring holes, or...

  3. 30 CFR 57.7018 - Hand clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7018 Hand clearance. Persons shall not hold the drill steel while...

  4. 30 CFR 57.7028 - Hand clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Underground Only § 57.7028 Hand clearance. Persons shall not rest their hands on the chuck...

  5. 32 CFR 154.16 - Security clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 1 2014-07-01 2014-07-01 false Security clearance. 154.16 Section 154.16 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEPARTMENT OF DEFENSE PERSONNEL SECURITY PROGRAM REGULATION Personnel Security Investigative Requirements § 154.16...

  6. 32 CFR 154.16 - Security clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 1 2012-07-01 2012-07-01 false Security clearance. 154.16 Section 154.16 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEPARTMENT OF DEFENSE PERSONNEL SECURITY PROGRAM REGULATION Personnel Security Investigative Requirements § 154.16...

  7. Effects of Bearing Clearance on Turbopump Stability

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Effects of bearing clearances, or "dead bands," on bearing loads and rotor stability in turbopumps examined in a 194-page report. Relatively simple mathematical force model for analyzing effects highlighted. Report shows nonlinear characteristics resulting from bearing dead bands have significant effect on dynamics of turbomachinery and not ignored as in the past.

  8. Clearance of seborrhoeic keratoses with topical dobesilate

    PubMed Central

    Cuevas, Pedro; Angulo, Javier; Salgüero, Irene; Giménez-Gallego, Guillermo

    2012-01-01

    A patient with two seborrhoeic keratoses in the face received a single daily application of dobesilate cream during 6 months. Dobesilate achieved complete clearance of the seborrhoeic keratosis lesions with good cosmoses, suggesting that this compound is a safe and efficient candidate in the treatment of seborrhoeic keratoses. PMID:22729328

  9. 30 CFR 57.11010 - Stairstep clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Stairstep clearance. 57.11010 Section 57.11010 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... steps shall be a minimum of seven feet, or suitable warning signs or similar devices shall be...

  10. 30 CFR 57.11010 - Stairstep clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Stairstep clearance. 57.11010 Section 57.11010 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... steps shall be a minimum of seven feet, or suitable warning signs or similar devices shall be...

  11. Carbamazepine clearance and seizure stability during pregnancy.

    PubMed

    Johnson, Emily L; Stowe, Zachary N; Ritchie, James C; Newport, D Jeffrey; Newman, Melanee L; Knight, Bettina; Pennell, Page B

    2014-04-01

    The aims of this study were to characterize the alterations in total and free carbamazepine (CBZ) and in total and free carbamazepine-epoxide (CBZ-EPO) clearances during pregnancy, to calculate the change in free fractions of CBZ and CBZ-EPO during pregnancy, and to determine whether seizure worsening is associated with a low ratio to nonpregnant baseline concentration of total or free CBZ or CBZ-EPO. Women on CBZ were enrolled before conception or during pregnancy in this prospective, observational study. Concomitant medications and seizure frequency were recorded. Serum total and free CBZ and CBZ-EPO were collected at each visit. Changes in the clearance of all four compounds and free fractions of CBZ and CBZ-EPO were compared with nonpregnant baseline. During pregnancy, the ratios to baseline concentrations of total and free CBZ and CBZ-EPO were compared for months with and without increased seizure frequency. Total and free CBZ and CBZ-EPO clearances were calculated in 15 pregnancies in 12 women. Clearances did not change for any of these compounds during pregnancy. The free fraction of CBZ increased from 0.23 at baseline to a maximum of 0.32 in the third trimester (p=0.008). In the six women on CBZ monotherapy with adequate seizure diaries and blood sampling, seizure worsening did not correspond to a ratio to baseline concentration of less than 0.65 for total or free CBZ or CBZ-EPO. In conclusion, total and free CBZ and CBZ-EPO clearances did not change substantially during pregnancy, and seizure frequency worsening was not associated with decreased concentrations of total or free CBZ; therefore, therapeutic drug monitoring may not be necessary for all women on CBZ during pregnancy. Further studies with larger sample sizes are needed before definitive recommendations can be made. Carbamazepine monotherapy may be a relatively safe and cost effective treatment option for women with focal epilepsy syndromes during pregnancy.

  12. 19 CFR 122.26 - Entry and clearance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... AIR COMMERCE REGULATIONS Private Aircraft § 122.26 Entry and clearance. Private aircraft, as defined... information as set forth in § 122.22(c), and grants electronic clearance via electronic mail or telephone. ...

  13. 77 FR 21989 - Critical Infrastructure Private Sector Clearance Program Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-12

    ... SECURITY Critical Infrastructure Private Sector Clearance Program Request AGENCY: National Protection and... Programs Directorate (NPPD), Office of Infrastructure Protection (IP) will submit the following Information... information provided. SUPPLEMENTARY INFORMATION: The Critical Infrastructure Private Sector Clearance Program...

  14. The assessment of glomerular function: creatinine clearance or plasma creatinine?

    PubMed Central

    Morgan, D. B.; Dillon, S.; Payne, R. B.

    1978-01-01

    Plasma creatinine concentration is superior to creatinine clearance for the detection of abnormal glomerular function, of changes of glomerular function in patients with chronic renal disease. Creatinine clearance should be abandoned as the routine assessment of glomerular function. PMID:673986

  15. Automated Conflict Resolution For Air Traffic Control

    NASA Technical Reports Server (NTRS)

    Erzberger, Heinz

    2005-01-01

    The ability to detect and resolve conflicts automatically is considered to be an essential requirement for the next generation air traffic control system. While systems for automated conflict detection have been used operationally by controllers for more than 20 years, automated resolution systems have so far not reached the level of maturity required for operational deployment. Analytical models and algorithms for automated resolution have been traffic conditions to demonstrate that they can handle the complete spectrum of conflict situations encountered in actual operations. The resolution algorithm described in this paper was formulated to meet the performance requirements of the Automated Airspace Concept (AAC). The AAC, which was described in a recent paper [1], is a candidate for the next generation air traffic control system. The AAC's performance objectives are to increase safety and airspace capacity and to accommodate user preferences in flight operations to the greatest extent possible. In the AAC, resolution trajectories are generated by an automation system on the ground and sent to the aircraft autonomously via data link .The algorithm generating the trajectories must take into account the performance characteristics of the aircraft, the route structure of the airway system, and be capable of resolving all types of conflicts for properly equipped aircraft without requiring supervision and approval by a controller. Furthermore, the resolution trajectories should be compatible with the clearances, vectors and flight plan amendments that controllers customarily issue to pilots in resolving conflicts. The algorithm described herein, although formulated specifically to meet the needs of the AAC, provides a generic engine for resolving conflicts. Thus, it can be incorporated into any operational concept that requires a method for automated resolution, including concepts for autonomous air to air resolution.

  16. WWW-based data entry for document clearance requests

    SciTech Connect

    Stasiak, D.M.

    1997-10-08

    All documents created at Argonne must be cleared before being published. The clearance process is coordinated by the Publications and Record Services. The Electronic Document Review and Clearance System (EDRC) consists of a Web-based system for submission of clearance requests, an electronic staging area for document awaiting review, and Web-based review and clearance of documents. This report covers the document clearing process, the EDRC system, expected benefits/costs, and a demonstration.

  17. Adjustable Bearing System with Selectively Optimized Installational Clearances

    DTIC Science & Technology

    1997-06-30

    ÄÖQ¥ÄL1HE mssx^. Navy Case No. 78,325 PATENTS ADJUSTABLE BEARING SYSTEM WITH SELECTIVELY OPTIMIZED INSTALLATIONAL CLEARANCES BACKGROUND OF THE... clearance 7 conditions. 8 9 10 .. small range of clearances within which to accommodate various operational conditions. Thus, a 12 very tight... clearance is extremely difficult to achieve for certain installations or conditions such as 13 quiet submarine control surface operation and

  18. Initial Field Evaluation of Pilot Procedures for Flying CTAS Descent Clearances

    NASA Technical Reports Server (NTRS)

    Palmer, Everett; Goka, Tsuyoshi; Cashion, Patricia; Feary, Michael; Graham, Holly; Smith, Nancy; Shafto, Michael (Technical Monitor)

    1994-01-01

    The Center TRACON Automation System (CTAS) is a new support system that is designed to assist air traffic controllers in the management of arrival traffic. CTAS will provide controllers with more information about current air traffic, enabling them to provide clearances for efficient, conflict-free descents that help achieve an orderly stream of aircraft at the final approach fix. CTAS is a computer-based system that functions as a "ground-based FMS" that can predict flight trajectories and arrival times for all incoming aircraft. CTAS uses an aircraft's cruise airspeed; current air traffic, winds and temperature; performance characteristics of the aircraft type; and individual airline preferences to create a flight profile from cruise altitude to the final approach fix. Controllers can use this flight profile to provide a descent clearance that will allow an aircraft to fly an efficient descent and merge more smoothly with other arriving aircraft. A field test of the CTAS Descent Advisor software was conducted at the Denver Center for aircraft arriving at the Stapleton International Airport from September 12-29. CTAS Descent clearances were given to a NASA flight test aircraft and to 77 airline flights that arrived during low traffic periods. For the airline portion of the field test, cockpit procedures and pilot briefing packages for both FMS equipped and unequipped aircraft were developed in cooperation with an airline. The procedures developed for the FMS equipped aircraft were to fly a VNAV descent at a controller specified speed to cross a metering fix at a specified altitude and speed. For nonFMS aircraft, the clearance also specified a CTAS calculated top-of-descent point. Some CTAS related flight deck issues included how much time was available to the pilots' for compliance, the amount of information that needed to be interpreted in the clearance and possible repercussions of misunderstandings. Data collected during the study ranged from subjective data

  19. Initial Field Evaluation of Pilot Procedures for Flying CTAS Descent Clearances

    NASA Technical Reports Server (NTRS)

    Palmer, Everett; Goka, Tsuyoshi; Cashion, Patricia; Feary, Michael; Graham, Holly; Smith, Nancy; Shafto, Michael (Technical Monitor)

    1994-01-01

    The Center TRACON Automation System (CTAS) is a new support system that is designed to assist air traffic controllers in the management of arrival traffic. CTAS will provide controllers with more information about current air traffic, enabling them to provide clearances for efficient, conflict-free descents that help achieve an orderly stream of aircraft at the final approach fix. CTAS is a computer-based system that functions as a "ground-based FMS" that can predict flight trajectories and arrival times for all incoming aircraft. CTAS uses an aircraft's cruise airspeed; current air traffic, winds and temperature; performance characteristics of the aircraft type; and individual airline preferences to create a flight profile from cruise altitude to the final approach fix. Controllers can use this flight profile to provide a descent clearance that will allow an aircraft to fly an efficient descent and merge more smoothly with other arriving aircraft. A field test of the CTAS Descent Advisor software was conducted at the Denver Center for aircraft arriving at the Stapleton International Airport from September 12-29. CTAS Descent clearances were given to a NASA flight test aircraft and to 77 airline flights that arrived during low traffic periods. For the airline portion of the field test, cockpit procedures and pilot briefing packages for both FMS equipped and unequipped aircraft were developed in cooperation with an airline. The procedures developed for the FMS equipped aircraft were to fly a VNAV descent at a controller specified speed to cross a metering fix at a specified altitude and speed. For nonFMS aircraft, the clearance also specified a CTAS calculated top-of-descent point. Some CTAS related flight deck issues included how much time was available to the pilots' for compliance, the amount of information that needed to be interpreted in the clearance and possible repercussions of misunderstandings. Data collected during the study ranged from subjective data

  20. 48 CFR 245.602-70 - Plant clearance procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Plant clearance procedures... Disposal 245.602-70 Plant clearance procedures. Follow the procedures at PGI 245.602-70 for establishing and processing a plant clearance case....

  1. 48 CFR 245.602-70 - Plant clearance procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Plant clearance procedures... Disposal 245.602-70 Plant clearance procedures. Follow the procedures at PGI 245.602-70 for establishing and processing a plant clearance case....

  2. 48 CFR 245.602-70 - Plant clearance procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Plant clearance procedures... Disposal 245.602-70 Plant clearance procedures. Follow the procedures at PGI 245.602-70 for establishing and processing a plant clearance case....

  3. 48 CFR 945.670-1 - Plant clearance function.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Plant clearance function... MANAGEMENT GOVERNMENT PROPERTY Reporting, Reutilization, and Disposal 945.670-1 Plant clearance function. If the plant clearance function has not been formally delegated to another Federal agency,...

  4. 48 CFR 945.670-1 - Plant clearance function.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Plant clearance function... MANAGEMENT GOVERNMENT PROPERTY Reporting, Reutilization, and Disposal 945.670-1 Plant clearance function. If the plant clearance function has not been formally delegated to another Federal agency,...

  5. 14 CFR 1260.63 - Customs clearance and visas.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Customs clearance and visas. 1260.63 Section 1260.63 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.63 Customs clearance and visas. Customs Clearance and Visas...

  6. 46 CFR 56.75-10 - Joint clearance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Joint clearance. 56.75-10 Section 56.75-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Brazing § 56.75-10 Joint clearance. (a) The clearance between surfaces to be joined shall be...

  7. 46 CFR 56.75-10 - Joint clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Joint clearance. 56.75-10 Section 56.75-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Brazing § 56.75-10 Joint clearance. (a) The clearance between surfaces to be joined shall be...

  8. 30 CFR 56.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance for surface equipment. 56.9330... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Loading... Dumping Sites § 56.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches...

  9. 30 CFR 57.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance for surface equipment. 57.9330 Section 57.9330 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Dumping Sites § 57.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches...

  10. 10 CFR 706.31 - Clearance of conciliators and arbitrators.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Clearance of conciliators and arbitrators. 706.31 Section... RELATIONS Contract Negotiation and Administration § 706.31 Clearance of conciliators and arbitrators. Conciliators and arbitrators who are regularly assigned to DOE cases may be processed for “Q” clearance at...

  11. 30 CFR 56.19104 - Clearance at shaft stations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance at shaft stations. 56.19104 Section 56.19104 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Shafts § 56.19104 Clearance at shaft stations. Suitable clearance at shaft stations shall...

  12. 14 CFR 375.24 - Entry and clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Entry and clearance. 375.24 Section 375.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) SPECIAL... Entry and clearance. All U.S. entry and clearance requirements for aircraft, passengers, crews,...

  13. 24 CFR 3285.305 - Clearance under homes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Clearance under homes. 3285.305... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Foundations § 3285.305 Clearance under homes. A minimum clearance of 12 inches must be maintained between the lowest member of the main...

  14. 30 CFR 57.19104 - Clearance at shaft stations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance at shaft stations. 57.19104 Section 57.19104 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Shafts § 57.19104 Clearance at shaft stations. Suitable clearance at shaft stations shall...

  15. 75 FR 70341 - Agency Information Collection Activities: Emergency Clearance Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-17

    ... ADMINISTRATION Agency Information Collection Activities: Emergency Clearance Request The Social Security Administration (SSA) publishes a list of information collection packages requiring clearance by the Office of... Desk Officer and SSA Reports Clearance Officer to the following addresses or fax numbers. (OMB),...

  16. 30 CFR 56.9103 - Clearance on adjacent tracks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance on adjacent tracks. 56.9103 Section..., Hauling, and Dumping Traffic Safety § 56.9103 Clearance on adjacent tracks. Railcars shall not be left on side tracks unless clearance is provided for traffic on adjacent tracks....

  17. 76 FR 17615 - Highway-Rail Grade Crossing; Safe Clearance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-30

    ... Parts 177 and 392 RIN 2137-AE69 & 2126-AB04 Highway-Rail Grade Crossing; Safe Clearance AGENCY: Pipeline... that PHMSA and FMCSA extend the comment period for the Highway-Rail Grade Crossing; Safe Clearance... Crossing; Safe Clearance Notice of Proposed Rulemaking, which was published on January 28, 2011 (76 FR...

  18. 10 CFR 706.13 - Clearance of counsel.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Clearance of counsel. 706.13 Section 706.13 Energy... and Procedures in National Labor Relations Board Proceedings § 706.13 Clearance of counsel. It is recognized that clearance of counsel for the parties is sometimes desirable for proper preparation of a...

  19. 8 CFR 1280.6 - Bond to obtain clearance; form.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Bond to obtain clearance; form. 1280.6... IMMIGRATION REGULATIONS IMPOSITION AND COLLECTION OF FINES § 1280.6 Bond to obtain clearance; form. A bond to obtain clearance of a vessel or aircraft under section 231, 237, 239, 243, 251, 253, 254, 255, 256,...

  20. 10 CFR 95.17 - Processing facility clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Processing facility clearance. 95.17 Section 95.17 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FACILITY SECURITY CLEARANCE AND SAFEGUARDING OF NATIONAL SECURITY INFORMATION AND RESTRICTED DATA Physical Security § 95.17 Processing facility clearance....

  1. 10 CFR 95.23 - Termination of facility clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Termination of facility clearance. 95.23 Section 95.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FACILITY SECURITY CLEARANCE AND SAFEGUARDING OF NATIONAL SECURITY INFORMATION AND RESTRICTED DATA Physical Security § 95.23 Termination of facility clearance....

  2. 75 FR 37518 - Agency Information Collection Activities: Emergency Clearance Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-29

    ... ADMINISTRATION Agency Information Collection Activities: Emergency Clearance Request The Social Security Administration (SSA) publishes a list of information collection packages requiring clearance by the Office of... Desk Officer and SSA Reports Clearance Officer to the following addresses or fax numbers. (OMB),...

  3. 8 CFR 280.6 - Bond to obtain clearance; form.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Bond to obtain clearance; form. 280.6 Section 280.6 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS IMPOSITION AND COLLECTION OF FINES § 280.6 Bond to obtain clearance; form. A bond to obtain clearance of a...

  4. 30 CFR 57.9103 - Clearance on adjacent tracks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Clearance on adjacent tracks. 57.9103 Section..., Hauling, and Dumping Traffic Safety § 57.9103 Clearance on adjacent tracks. Railcars shall not be left on side tracks unless clearance is provided for traffic on adjacent tracks....

  5. 48 CFR 245.602-70 - Plant clearance procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Plant clearance procedures... Disposal 245.602-70 Plant clearance procedures. Follow the procedures at PGI 245.602-70 for establishing and processing a plant clearance case. ...

  6. 30 CFR 56.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Clearance for surface equipment. 56.9330... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Loading... Dumping Sites § 56.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches from...

  7. 30 CFR 56.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Clearance for surface equipment. 56.9330... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Loading... Dumping Sites § 56.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches from...

  8. 30 CFR 56.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Clearance for surface equipment. 56.9330... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Loading... Dumping Sites § 56.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches from...

  9. 30 CFR 56.9330 - Clearance for surface equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Clearance for surface equipment. 56.9330... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Loading... Dumping Sites § 56.9330 Clearance for surface equipment. Continuous clearance of at least 30 inches from...

  10. 24 CFR 3285.305 - Clearance under homes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Clearance under homes. 3285.305... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Foundations § 3285.305 Clearance under homes. A minimum clearance of 12 inches must be maintained between the lowest member of the main frame...

  11. 14 CFR 27.661 - Rotor blade clearance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Rotor blade clearance. 27.661 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Rotors § 27.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  12. 14 CFR 27.661 - Rotor blade clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Rotor blade clearance. 27.661 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Rotors § 27.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  13. 14 CFR 29.661 - Rotor blade clearance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Rotor blade clearance. 29.661 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Rotors § 29.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  14. 14 CFR 27.661 - Rotor blade clearance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Rotor blade clearance. 27.661 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Rotors § 27.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  15. 14 CFR 29.661 - Rotor blade clearance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Rotor blade clearance. 29.661 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Rotors § 29.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  16. 14 CFR 27.661 - Rotor blade clearance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Rotor blade clearance. 27.661 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Rotors § 27.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  17. 14 CFR 27.661 - Rotor blade clearance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Rotor blade clearance. 27.661 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Rotors § 27.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  18. 14 CFR 29.661 - Rotor blade clearance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Rotor blade clearance. 29.661 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Rotors § 29.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  19. 14 CFR 29.661 - Rotor blade clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Rotor blade clearance. 29.661 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Rotors § 29.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  20. 14 CFR 29.661 - Rotor blade clearance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Rotor blade clearance. 29.661 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Rotors § 29.661 Rotor blade clearance. There must be enough clearance between the rotor blades and other parts of the structure...

  1. Evaluation of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Lattime, Scott B.; Taylor, Shawn; DeCastro, Jonathan A.; Oswald, Jay; Melcher, Kevin J.

    2005-01-01

    Reducing blade tip clearances through active tip clearance control in the high pressure turbine can lead to significant reductions in emissions and specific fuel consumption as well as dramatic improvements in operating efficiency and increased service life. Current engines employ scheduled cooling of the outer case flanges to reduce high pressure turbine tip clearances during cruise conditions. These systems have relatively slow response and do not use clearance measurement, thereby forcing cold build clearances to set the minimum clearances at extreme operating conditions (e.g., takeoff, reburst) and not allowing cruise clearances to be minimized due to the possibility of throttle transients (e.g., step change in altitude). In an effort to improve upon current thermal methods, a first generation mechanically-actuated active clearance control (ACC) system has been designed and fabricated. The system utilizes independent actuators, a segmented shroud structure, and clearance measurement feedback to provide fast and precise active clearance control throughout engine operation. Ambient temperature performance tests of this first generation ACC system assessed individual seal component leakage rates and both static and dynamic overall system leakage rates. The ability of the nine electric stepper motors to control the position of the seal carriers in both open- and closed-loop control modes for single and multiple cycles was investigated. The ability of the system to follow simulated engine clearance transients in closed-loop mode showed the system was able to track clearances to within a tight tolerance ( 0.001 in. error).

  2. Evaluation of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Lattime, Scott B.; DeCastro, Jonathan A.; Oswald, Jay; Melcher, Kevin J.

    2005-01-01

    Reducing blade tip clearances through active tip clearance control in the high pressure turbine can lead to significant reductions in emissions and specific fuel consumption as well as dramatic improvements in operating efficiency and increased service life. Current engines employ scheduled cooling of the outer case flanges to reduce high pressure turbine tip clearances during cruise conditions. These systems have relatively slow response and do not use clearance measurement, thereby forcing cold build clearances to set the minimum clearances at extreme operating conditions (e.g., takeoff, reburst) and not allowing cruise clearances to be minimized due to the possibility of throttle transients (e.g., step change in altitude). In an effort to improve upon current thermal methods, a first generation mechanically-actuated active clearance control (ACC) system has been designed and fabricated. The system utilizes independent actuators, a segmented shroud structure, and clearance measurement feedback to provide fast and precise active clearance control throughout engine operation. Ambient temperature performance tests of this first generation ACC system assessed individual seal component leakage rates and both static and dynamic overall system leakage rates. The ability of the nine electric stepper motors to control the position of the seal carriers in both open- and closed-loop control modes for single and multiple cycles was investigated. The ability of the system to follow simulated engine clearance transients in closed-loop mode showed the system was able to track clearances to within a tight tolerance (0.001 in. error).

  3. 10 CFR 706.13 - Clearance of counsel.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Clearance of counsel. 706.13 Section 706.13 Energy DEPARTMENT OF ENERGY SECURITY POLICIES AND PRACTICES RELATING TO LABOR-MANAGEMENT RELATIONS Security Policies... responsible for requesting clearance of its counsel well in advance so that clearance requirements will...

  4. 46 CFR 56.75-10 - Joint clearance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Joint clearance. 56.75-10 Section 56.75-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Brazing § 56.75-10 Joint clearance. (a) The clearance between surfaces to be joined shall be no...

  5. 46 CFR 56.75-10 - Joint clearance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Joint clearance. 56.75-10 Section 56.75-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Brazing § 56.75-10 Joint clearance. (a) The clearance between surfaces to be joined shall be no...

  6. 46 CFR 56.75-10 - Joint clearance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Joint clearance. 56.75-10 Section 56.75-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Brazing § 56.75-10 Joint clearance. (a) The clearance between surfaces to be joined shall be no...

  7. Autonomy and Automation

    NASA Technical Reports Server (NTRS)

    Shively, Jay

    2017-01-01

    A significant level of debate and confusion has surrounded the meaning of the terms autonomy and automation. Automation is a multi-dimensional concept, and we propose that Remotely Piloted Aircraft Systems (RPAS) automation should be described with reference to the specific system and task that has been automated, the context in which the automation functions, and other relevant dimensions. In this paper, we present definitions of automation, pilot in the loop, pilot on the loop and pilot out of the loop. We further propose that in future, the International Civil Aviation Organization (ICAO) RPAS Panel avoids the use of the terms autonomy and autonomous when referring to automated systems on board RPA. Work Group 7 proposes to develop, in consultation with other workgroups, a taxonomy of Levels of Automation for RPAS.

  8. Market Mechanism for Line Congestion Clearance

    NASA Astrophysics Data System (ADS)

    Ruiz Monroy, José Joaquín; Kita, Hiroyuki; Tanaka, Eiichi; Hasegawa, Jun

    This paper proposes a mechanism for clearance of line congestion and power flow control in a deregulated market environment. The mechanism applies penalties to the bilateral transactions that cause line congestion by increasing the prices of such transactions. The market regulates itself by redefining the transactions and checking again for violations, applying penalties if necessary and repeating the process until all the demand is satisfied without causing line congestion to the system. A bilateral transaction matrix (BTM) creation algorithm developed by the authors and a DC power flow program are integrated as parts of the market mechanism proposed in this paper. The congestion is cleared by the market participants when they reschedule their transactions. This mechanism is useful to study the effects of bilateral transactions on a power system and helps the Independent System Operator (ISO) to create rules and market mechanisms for line congestion clearance and power flow control.

  9. Gas turbine engine active clearance control

    NASA Technical Reports Server (NTRS)

    Deveau, Paul J. (Inventor); Greenberg, Paul B. (Inventor); Paolillo, Roger E. (Inventor)

    1985-01-01

    Method for controlling the clearance between rotating and stationary components of a gas turbine engine are disclosed. Techniques for achieving close correspondence between the radial position of rotor blade tips and the circumscribing outer air seals are disclosed. In one embodiment turbine case temperature modifying air is provided in flow rate, pressure and temperature varied as a function of engine operating condition. The modifying air is scheduled from a modulating and mixing valve supplied with dual source compressor air. One source supplies relatively low pressure, low temperature air and the other source supplies relatively high pressure, high temperature air. After the air has been used for the active clearance control (cooling the high pressure turbine case) it is then used for cooling the structure that supports the outer air seal and other high pressure turbine component parts.

  10. Augmented Renal Clearance in Pediatric Patients With Febrile Neutropenia Associated With Vancomycin Clearance.

    PubMed

    Hirai, Keita; Ihara, Setsuko; Kinae, Ayumi; Ikegaya, Kenichi; Suzuki, Masayuki; Hirano, Keiko; Itoh, Kunihiko

    2016-06-01

    Vancomycin (VCM) dosage optimization in the early stages of therapy is required to achieve target trough serum concentrations, particularly in critically ill patients. Augmented renal clearance (ARC), commonly characterized by an enhanced renal clearance, has been associated with subtherapeutic concentrations of antibiotics. The aim of this study was to investigate the risk factors including febrile neutropenia for both ARC and VCM clearance in Japanese pediatric patients. A total of 109 pediatric patients with normal renal function were included in this observational study. From VCM serum concentrations, individual VCM clearance was estimated by the Bayesian method using a 1-compartment model. Patients were classified on the basis of the presence of febrile neutropenia, cancer, trauma, systemic inflammatory response syndrome, and surgical operation. Risk factors for ARC, as defined by estimated glomerular filtration rate (eGFR) above median value (≥160 mL·min·1.73 m), were evaluated. Febrile neutropenia was only an independent risk factor for ARC (odds ratio, 5.86; 95% confidence interval, 1.98-21.66, P = 0.0030), which was the result of a stepwise multivariate logistic regression analysis. Although univariate analysis demonstrated a significant association of febrile neutropenia with VCM clearance, the significant independent factors of VCM clearance were age and eGFR but not febrile neutropenia, as estimated by the stepwise multivariate linear regression analysis. This observational study concluded that febrile neutropenia, a significant risk factor for ARC, indirectly influenced VCM clearance towing to an elevated eGFR. Cancer, trauma, systemic inflammatory response syndrome, and surgical operation were not significantly associated with ARC; however, more studies are needed to validate this observation. Adjustment of the initial dosage of VCM is required for achieving optimal therapeutic concentrations in pediatric patients with febrile neutropenia.

  11. Clearance Kinetics and Clearance Routes of Molecules From the Suprachoroidal Space After Microneedle Injection

    PubMed Central

    Chiang, Bryce; Wang, Ke; Ethier, C. Ross; Prausnitz, Mark R.

    2017-01-01

    Purpose To determine clearance kinetics and routes of clearance of molecules from the suprachoroidal space (SCS) of live New Zealand White rabbits. Methods Suprachoroidal space collapse rate and pressure changes after microneedle injection into SCS were determined. Fluorescent fundus images were acquired to determine clearance rates of molecules ranging in size from 332 Da to 2 MDa. Microneedle injections of fluorescein were performed, and samples were taken from various sites over time to determine amount of fluorescein exiting the eye. Clearance transport was modeled theoretically and compared with experimental data. Results After injection, pressures in SCS and vitreous humor spiked and returned to baseline within 20 minutes; there was no difference between these two pressures. Suprachoroidal space collapse occurred within 40 minutes. One hour after fluorescein injection, 46% of fluorescein was still present in the eye, 15% had transported across sclera, 6% had been cleared by choroidal vasculature, and 4% had exited via leakage pathways. Characteristic clearance time increased in proportion with molecular radius, but total clearance of 2 MDa FITC-dextran was significantly slower (21 days) than smaller molecules. These data generally agreed with predictions from a theoretical model of molecular transport. Conclusions Guided by experimental data in the context of model predictions, molecular clearance from SCS occurred in three regimes: (1) on a time scale of approximately 10 minutes, fluid and molecules exited SCS by diffusion into sclera and choroid, and by pressure-driven reflux via transscleral leakage sites; (2) in approximately 1 hour, molecules cleared from choroid by blood flow; and (3) in 1 to 10 hours, molecules cleared from sclera by diffusion and convection. PMID:28125841

  12. Army Delivers Route Clearance Vehicle Capabilities

    DTIC Science & Technology

    2010-08-01

    the Husky Vehicle-Mount- ed Mine-Detection (VMMD) System, the Buffalo® Mine- Protected Clearance Vehicle (MPCV), the Panther Medium Mine-Protected...cord (POR) RCVs—the Husky, the Buf- falo, and the Panther . POR-configured Huskys, Buffalos, and Panthers have already been fielded in-theater—albeit...IED vehicle equipped with a distinctive hydraulic arm that inter- rogates suspected explosive hazards and clears them when necessary. The Panther

  13. Activating the 42d Clearance Company

    DTIC Science & Technology

    2011-12-01

    System– Enhanced. ■ Establishing supply and maintenance accounts. ■ Procuring the unit guidon . Other documents created to expedite and track the...SUBTITLE Activating the 42d Clearance Company 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK...NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Army Engineer School,Engineer Professional Bulletin,464 MANSCEN

  14. Reduced methadone clearance during aromatase inhibition.

    PubMed

    Lu, Wenjie Jessie; Thong, Nancy; Flockhart, David A

    2012-08-01

    Methadone is increasingly used in pain management and is a cornerstone in the treatment of opiate withdrawal. It is subject to highly variable clearance among patients. The complete metabolic disposition of methadone is likely to involve a number of enzymes, including specifically CYP2B6. Previous studies in vitro suggest that metabolism by aromatase may also contribute. Single-dose methadone pharmacokinetics (2 mg, intravenous) were studied in 15 healthy postmenopausal women in the presence and absence of a potent aromatase inhibitor, letrozole. A sequential design was used, involving a control period followed by treatment with letrozole (2.5 mg/d, 11 days), in which each subject served as her own control. On average, letrozole treatment reduced methadone systemic clearance by 22% (P = 0.001), increased methadone AUC by 23% (P = 0.007), and increased elimination half-life by 21% (P = 0.042). The plasma parent-to-metabolite ratio also increased (P = 0.009), and there was a linear relationship (R2 = 0.74) between change in this plasma ratio and change in methadone AUC0-∞. In contrast, there was no such association with change in apparent urinary methadone clearance. Letrozole did not change methadone distribution half-life or its volume of distribution. Overall, these data demonstrate a significant decrease in methadone clearance during coadministration of letrozole, consistent with decreased metabolism brought about by aromatase inhibition. An involvement of aromatase in the disposition of methadone may help explain the difficulty in methadone dosing and suggests a broader role for this catalyst of endogenous steroid metabolism in xenobiotic drug disposition.

  15. Deposition and clearance of inhaled particles.

    PubMed Central

    Stuart, B O

    1976-01-01

    Theoretical models of respiratory tract deposition of inhaled particles are compared to experimental studies of deposition patterns in humans and animals, as determined principally by particle size, density, respiratory rate and flow parameters. Various models of inhaled particle deposition make use of convenient approximations of the respiratory tract to predict tractional deposition according to fundamental physical processes of impaction, sedimentation, and diffusion. These theoretical models for both total deposition and regional (nasopharyngeal, tracheobronchial, and pulmonary) deposition are compared with experimental studies of inhaled dusts in humans or experimental animals that have been performed in many laboratories over several decades. Reasonable correlation has been obtained between theoretical and experimental studies, but the behavior of very fine (less than 0.01 mum) particles requires further refinement.Properties of particle shape, charge, and hygroscopicity as well as the degree of respiratory tract pathology also influence deposition patterns and further experimental work is urgently needed in these areas. The influence upon deposition patterns of dynamic alterations in inspiratory flow profiles caused by a variety of breathing patterns also requires further study, and the use of such techniques with selected inhaled particle size holds promise in possible diagnostic aid in diagnosis of normal versus disease conditions. Mechanisms of conducting airway and alveolar clearance processes involving mucociliary clearance, dissolution, transport to systemic circulation, and translocation via regional lymphatic clearance are discussed. The roles of the pulmonary macrophage in airway and alveolar clearance are described, and the applicability of recent solubility models for translocation or deposited materials to liver, skeleton, or other systemic organs is discussed. PMID:797567

  16. Workflow automation architecture standard

    SciTech Connect

    Moshofsky, R.P.; Rohen, W.T.

    1994-11-14

    This document presents an architectural standard for application of workflow automation technology. The standard includes a functional architecture, process for developing an automated workflow system for a work group, functional and collateral specifications for workflow automation, and results of a proof of concept prototype.

  17. Evaluation of lung clearance of inhaled pertechnegas.

    PubMed

    Fanti, S; Compagnone, G; Pancaldi, D; Franchi, R; Corbelli, C; Marengo, M; Onofri, C; Galassi, R; Levorato, M; Monetti, N

    1996-02-01

    Pertechnegas is a new ventilation agent produced by modifying the atmosphere of combustion of Technegas. Due to its rapid disappearance from the lungs, Pertechnegas has been suggested as useful in measuring pulmonary epithelial permeability. This study aimed to assess the reliability of ventilation scans with Pertechnegas to evaluate alveolar-capillary permeability. Six non-smokers with no evidence of pulmonary disease were investigated. Scintigraphic data were used to evaluate the site of Pertechnegas deposition (by assessing the Penetration Index [PI] of the gas), its clearance rate (by calculating the time to half-clearance [T1/2]) and its lung distribution (by means of a pixel-by-pixel analysis. PI measurements produced a mean value of 88.8 +/- 13.3% (range 69-117%). Time activity curves showed a fast clearance in all cases (mean T1/2 = 10.7 +/- 2.1 min, range 8.1-14.3 min). Comparison of statistical indices of uniform deposition (skewness and kurtosis) indicated satisfactory homogeneity of Pertechnegas distribution throughout the lungs. These data show that after inhalation Pertechnegas has a peripheral deposition and a homogeneous distribution in the lungs and is rapidly cleared through the alveolar-capillary barrier. In conclusion Pertechnegas can be recommended as a potential radiopharmaceutical for studying the pulmonary epithelial barrier.

  18. Antipyrine clearance during occupational exposure to styrene.

    PubMed Central

    Døssing, M

    1983-01-01

    Animal experiments have indicated that styrene, which is a widely used organic solvent, may induce the microsomal enzyme function of the liver. Thirteen workers with long-term exposure to styrene in a polyester plant were investigated. They worked at air concentrations about the maximal allowed time-weighted average concentration of styrene in most Western countries (50 ppm). The clearance of antipyrine was determined from saliva concentrations before and after three weeks free of exposure and then again three weeks after returning to work. Thirteen matched controls were investigated with similar intervals and methods. No significant differences were found between the half life, apparent volume of distribution, or clearance of antipyrine either within the groups or between the groups. The data exclude (95% confidence limit) the possibility that occupational exposure to styrene at concentrations about 50 ppm stimulates the microsomal enzyme function of the liver to a degree compatible with an increase in antipyrine clearance of more than 2 ml x min-1 (3%). While the first antipyrine estimation was carried out under medical supervision, the workers themselves managed to perform the antipyrine test correctly after verbal and written instructions. This has broadened the application of the antipyrine test. PMID:6131688

  19. Airway clearance strategies for the pediatric patient.

    PubMed

    Davidson, Kathryn L

    2002-07-01

    Clinicians who care for cystic fibrosis (CF) patients have many techniques to choose from to facilitate mucus clearance. Little has been published about when to introduce the various techniques and in what order to teach them. Debates have occurred over these issues in the CF community, and there is now consensus on some topics. It is very important to teach adherence to therapy at an early age. Adherence to an airway clearing regimen assists in maintaining good pulmonary function in CF patients. Knowing when and how to introduce airway clearance techniques beyond chest physiotherapy (CPT) is clinically relevant and useful. A 5-position modified CPT routine can be used with infants and children, and it takes less time and may improve adherence. Infants and toddlers can be taught breathing games that eventually lead them to perform diaphragmatic breathing and huffing. Once they have mastered diaphragmatic breathing and huffing, children can be taught the active cycle of breathing technique. Modified CPT can be phased out at that point. Positive expiratory pressure therapy can usually be introduced around 6-7 years of age. High-frequency chest wall oscillation, oscillating positive expiratory pressure, and autogenic drainage all follow. CF patients should be given every opportunity to learn and master various techniques to promote mucus clearance.

  20. Effect of ultrafiltration on peritoneal dialysis drug clearances.

    PubMed

    Lau, A H; Chow-Tung, E; Assadi, F K; Fornell, L; John, E

    1985-01-01

    To determine the effect of dialysate osmolarity on peritoneal dialysis drug transfer, peritoneal dialysis clearances of theophylline, phenobarbital, and tobramycin were determined in 10 rabbits using dialysate containing 1.5 and 4.25% glucose. Urea and creatinine clearances were also obtained for comparison. Under similar dialysis conditions, the peritoneal clearances of the three drugs remained unchanged for the two types of dialysate. In contrast, the peritoneal clearances of urea and creatinine were significantly higher with the use of 4.25% glucose dialysate (p less than 0.001). Thus, peritoneal dialysis clearances of theophylline, phenobarbital and tobramycin are not significantly affected by hypertonicity-induced ultrafiltration during acute peritoneal dialysis.

  1. Influence of clearance between piston and cylinder on piston friction

    SciTech Connect

    Takiguchi, M.; Kikuchi, H.; Furuhama, S

    1988-01-01

    It is desired to minimize clearance between the piston and the cylinder to reduce noise and suppress vibration. Although significant effort has been made for this purpose, increased piston friction force and the occurrence of seizure still prevent the ideal clearance from being realized. In order to determine the lower limit of the piston clearance, it is crucial to clarify the following unknowns; which part of piston contributes to friction increase as the piston clearance is decreased, during which phase of the piston motion the friction increase occurs, and how the piston clearance affects lubrication phenomena.

  2. Scintigraphic monitoring of mucociliary tracheo-bronchial clearance of technetium-99m macroaggregated albumin aerosol

    SciTech Connect

    Zwas, S.T.; Katz, I.; Belfer, B.; Baum, G.L.; Aharonson, E.

    1987-02-01

    A simple method for in vivo monitoring mucociliary tracheo-bronchial clearance is described. Eighteen healthy subjects and 13 patients with various chronic lung diseases were studied by this method. The principle of using an aerosol administration system similar to the system used for routine ventilation lung studies is stressed. Proximal large airway deposition of the radioaerosol was obtained by using relatively large particles (average diameter 2 microM) of (99mTc)MAA aerosol. Monitoring was performed by visual inspection of the tracheo-bronchial cinescintigraphic ascendence of the accumulated radioactive boli and by assessing their rate of clearance via automated computer analysis of the time-activity curves, following the movement of each bolus. The normal mean +/- s.d. clearance rate thus obtained was 4.7 +/- 1.3 mm/min. This rate appears to be more precise as compared with the range of results obtained by other radioisotopic methods. Significantly faster rates, mean 8.2 +/- 1.4 mm/min (p less than 0.001) were obtained in bronchiectatic patients while slower rates (2.8 mm/min) were seen in a patient with ciliary dyskinesia.

  3. Similarity analysis of compressor tip clearance flow structure

    NASA Technical Reports Server (NTRS)

    Chen, G. T.; Greitzer, E. M.; Tan, C. S.; Marble, F. E.

    1991-01-01

    A new approach is presented for analyzing compressor tip clearance flow. The basic idea is that the clearance velocity field can be (approximately) decomposed into independent throughflow and crossflow, since chordwise pressure gradients are much smaller than normal pressure gradients in the clearance region. As in the slender body approximation in external aerodynamics, this description implies that the three-dimensional steady clearance flow can be viewed as a two-dimensional, unsteady flow. Using this approach, a similarity scaling for the crossflow in the clearance region is developed and a generalized description of the clearance vortex is derived. Calculations based on the similarity scaling agree well with a wide range of experimental data in regard to flow features such as crossflow velocity field, static pressure field, and tip clearance vortex trajectory.

  4. Deposition, retention, and clearance of inhaled particles.

    PubMed Central

    Lippmann, M; Yeates, D B; Albert, R E

    1980-01-01

    The relation between the concentrations and characteristics of air contaminants in the work place and the resultant toxic doses and potential hazards after their inhalation depends greatly on their patterns of deposition and the rates and pathways for their clearance from the deposition sites. The distribution of the deposition sites of inhaled particles is strongly dependent on their aerodynamic diameters. For normal man, inhaled non-hygroscopic particles greater than or equal to 2 micrometers that deposit in the conducting airways by impaction are concentrated on to a small fraction of the surface. Cigarette smoking and bronchitis produce a proximal shift in the deposition pattern. The major factor affecting the deposition of smaller particles is their transfer from tidal to reserve air. For particles soluble in respiratory tract fluid, systemic uptake may be relatively complete for all deposition patterns, and there may be local toxic or irritant effects or both. On the other hand, slowly soluble particles depositing in the conducting airways are carried on the surface to the glottis and are swallowed within one day. Mucociliary transport rates are highly variable, both along the ciliated airways of a given individual and between individuals. The changes in clearance rates produced by drugs, cigarette smoke, and other environmental pollutants can greatly increase or decrease these rates. Particles deposited in non-ciliated airways have large surface-to-volume ratios, and clearance by dissolution can occur for materials generally considered insoluble. They may also be cleared as free particles either by passive transport along surface liquids or, after phagocytosis, by transport within alveolar macrophages. If the particles penetrate the epithelium, either bare or within macrophages, they may be sequestered within cells or enter the lymphatic circulation and be carried to pleural, hilar, and more distant lymph nodes. Non-toxic insoluble particles are cleared from

  5. Automation in Clinical Microbiology

    PubMed Central

    Ledeboer, Nathan A.

    2013-01-01

    Historically, the trend toward automation in clinical pathology laboratories has largely bypassed the clinical microbiology laboratory. In this article, we review the historical impediments to automation in the microbiology laboratory and offer insight into the reasons why we believe that we are on the cusp of a dramatic change that will sweep a wave of automation into clinical microbiology laboratories. We review the currently available specimen-processing instruments as well as the total laboratory automation solutions. Lastly, we outline the types of studies that will need to be performed to fully assess the benefits of automation in microbiology laboratories. PMID:23515547

  6. Automation of industrial bioprocesses.

    PubMed

    Beyeler, W; DaPra, E; Schneider, K

    2000-01-01

    The dramatic development of new electronic devices within the last 25 years has had a substantial influence on the control and automation of industrial bioprocesses. Within this short period of time the method of controlling industrial bioprocesses has changed completely. In this paper, the authors will use a practical approach focusing on the industrial applications of automation systems. From the early attempts to use computers for the automation of biotechnological processes up to the modern process automation systems some milestones are highlighted. Special attention is given to the influence of Standards and Guidelines on the development of automation systems.

  7. Shoe-String Automation

    SciTech Connect

    Duncan, M.L.

    2001-07-30

    Faced with a downsizing organization, serious budget reductions and retirement of key metrology personnel, maintaining capabilities to provide necessary services to our customers was becoming increasingly difficult. It appeared that the only solution was to automate some of our more personnel-intensive processes; however, it was crucial that the most personnel-intensive candidate process be automated, at the lowest price possible and with the lowest risk of failure. This discussion relates factors in the selection of the Standard Leak Calibration System for automation, the methods of automation used to provide the lowest-cost solution and the benefits realized as a result of the automation.

  8. An Experimental Study of the Effects of Automation on Pilot Situational Awareness in the Datalink ATC Environment

    NASA Technical Reports Server (NTRS)

    Hahn, Edward C.; Hansman, R. John, Jr.

    1992-01-01

    An experiment to study how automation, when used in conjunction with datalink for the delivery of air traffic control (ATC) clearance amendments, affects the situational awareness of aircrews was conducted. The study was focused on the relationship of situational awareness to automated Flight Management System (FMS) programming and the readback of ATC clearances. Situational awareness was tested by issuing nominally unacceptable ATC clearances and measuring whether the error was detected by the subject pilots. The experiment also varied the mode of clearance delivery: Verbal, Textual, and Graphical. The error detection performance and pilot preference results indicate that the automated programming of the FMS may be superior to manual programming. It is believed that automated FMS programming may relieve some of the cognitive load, allowing pilots to concentrate on the strategic implications of a clearance amendment. Also, readback appears to have value, but the small sample size precludes a definite conclusion. Furthermore, because textual and graphical modes of delivery offer different but complementary advantages for cognitive processing, a combination of these modes of delivery may be advantageous in a datalink presentation.

  9. Clearance of minute virus of mice by flocculation and microfiltration.

    PubMed

    Wickramasinghe, S Ranil; Han, Binbing; Carlson, Jonathan O; Powers, Scott M

    2004-06-20

    Clearance of minute virus of mice (MVM) from CHO cell suspensions by flocculation and microfiltration has been investigated. MVM is a parvovirus that is recommended by the U.S. Food and Drug Administration for validating clearance of parvoviruses. The feed streams were flocculated using a cationic polyelectrolyte. Virus clearance in excess of 10,000-fold was obtained in the bulk permeate for flocculated feeds streams. However, the level of clearance was only about 10- to 100-fold for unflocculated feed streams. The results suggest that virus clearance involves interactions between the MVM particles, the cationic polyelectrolyte, and the CHO cells present. Validating virus clearance is a major concern in the biotechnology industry. New unit operations are frequently added to the purification train simply to validate virus clearance. However, many of these unit operations are less effective at validating clearance of nonenveloped viruses. Validating clearance of parvoviruses is often particularly problematic as they are nonenveloped and the virus particles are small (18 to 24 nm), making physical removal difficult. The results obtained herein indicate that addition of the cationic polyelectrolyte not only results in significant clearance of MVM but also leads to an increase in permeate flux. Copyright 2004 Wiley Periodicals, Inc.

  10. Evolution of technology for automated peritoneal dialysis.

    PubMed

    Ronco, Claudio; Amerling, Richard; Dell'aquila, Roberto; Rodighiero, Maria Pia; Di Loreto, Pierluigi

    2006-01-01

    Automated peritoneal dialysis (APD) is important for the further penetration of PD in the dialysis marketplace. Long dwell, equilibration PD (CAPD) has limited applicability in many patients due to inadequate solute clearance or fast membrane transport characteristics. Providing large volumes of dialysate over circumscribed hours is highly labor intensive without an automated system. Early attempts at APD were crude but effective in reducing labor, which was generally provided by nursing staff. Later evolution of PD technology has been greatly accelerated by the microchip, and by miniaturization of components. Current generation machines allow individualized fill volumes, variable tidal volumes and additional daytime automated exchanges, teledialysis, memorized delivery control, and full portability. The ideal machine should not only be able to perform all treatment schedules, but it should also optimize the performance of a selected treatment strategy. Biocompatible solutions, improved osmotic agents, and sorbent technology are all adaptable to APD. The eventual evolution toward continuous flow PD will resolve many of the current problems with both CAPD and APD.

  11. Lithium clearance in mineralocorticoid escape in humans

    SciTech Connect

    Boer, W.H.; Koomans, H.A.; Mees, E.J.D.

    1987-03-01

    Lithium clearance (C/sub Li/) has been advanced as an indicator of Na delivery from the proximal tubules. The authors studied C/sub Li/ in eight healthy males before and after mineralocorticoid escape, a maneuver that may induce suppression of fractional proximal Na reabsorption (FPR/sub Na/). FPR/sub Na/ was also estimated from changes in maximal free water clearance (C/sub H/sub 2/O/). Plasma volume was measured as the /sup 131/I-labeled albumin distribution space. Extracellular fluid volume was estimated as the /sup 82/Br vector distribution volume. According to the latter method, FPR/sub Na/ dropped whereas inulin clearance rose. The changes in C/sub Li/ were surprisingly large. If lithium is a valid marker of Na handling in the proximal tubule in humans, this change would imply a fall in FPR/sub Na/, suggesting a much larger shift in tubular Na reabsorption in escape than hitherto suspected. In addition, it would suggest that the inevitable back diffusion of a part of the solute-free water in the distal nephron, and thus overestimation of FPR/sub Na/ by the C/sub H/sub 2/O/ method, increases importantly during escape. Alternately, lithium may not be a good marker of proximal tubular Na handling. For instance, both lithium reabsorption and escape may take place beyond the proximal tubule, or lithium may be excreted in the distal nephron in certain conditions. Present methods do not permit further analysis of these options in the human model.

  12. Automated DNA Sequencing System

    SciTech Connect

    Armstrong, G.A.; Ekkebus, C.P.; Hauser, L.J.; Kress, R.L.; Mural, R.J.

    1999-04-25

    Oak Ridge National Laboratory (ORNL) is developing a core DNA sequencing facility to support biological research endeavors at ORNL and to conduct basic sequencing automation research. This facility is novel because its development is based on existing standard biology laboratory equipment; thus, the development process is of interest to the many small laboratories trying to use automation to control costs and increase throughput. Before automation, biology Laboratory personnel purified DNA, completed cycle sequencing, and prepared 96-well sample plates with commercially available hardware designed specifically for each step in the process. Following purification and thermal cycling, an automated sequencing machine was used for the sequencing. A technician handled all movement of the 96-well sample plates between machines. To automate the process, ORNL is adding a CRS Robotics A- 465 arm, ABI 377 sequencing machine, automated centrifuge, automated refrigerator, and possibly an automated SpeedVac. The entire system will be integrated with one central controller that will direct each machine and the robot. The goal of this system is to completely automate the sequencing procedure from bacterial cell samples through ready-to-be-sequenced DNA and ultimately to completed sequence. The system will be flexible and will accommodate different chemistries than existing automated sequencing lines. The system will be expanded in the future to include colony picking and/or actual sequencing. This discrete event, DNA sequencing system will demonstrate that smaller sequencing labs can achieve cost-effective the laboratory grow.

  13. Carbamazepine clearance in hemodialysis and hemoperfusion.

    PubMed

    Kandrotas, R J; Oles, K S; Gal, P; Love, J M

    1989-02-01

    A 47-year-old woman with endstage renal disease and dialysis-induced encephalopathy was being treated with carbamazepine for myoclonus. Her carbamazepine serum concentration appeared to be therapeutic at 5.1 micrograms/ml. She experienced a seizure while on hemodialysis/hemoperfusion that was possibly related to the removal of carbamazepine during dialysis. The elimination of carbamazepine on a dialysis day was compared with elimination on a nondialysis day. The half-life and apparent clearance were the same for each day, indicating that hemodialysis/hemoperfusion had little effect on the overall removal of carbamazepine from the body. The possible reasons for this lack of effect are discussed.

  14. Statistical Tolerance and Clearance Analysis for Assembly

    NASA Technical Reports Server (NTRS)

    Lee, S.; Yi, C.

    1996-01-01

    Tolerance is inevitable because manufacturing exactly equal parts is known to be impossible. Furthermore, the specification of tolerances is an integral part of product design since tolerances directly affect the assemblability, functionality, manufacturability, and cost effectiveness of a product. In this paper, we present statistical tolerance and clearance analysis for the assembly. Our proposed work is expected to make the following contributions: (i) to help the designers to evaluate products for assemblability, (ii) to provide a new perspective to tolerance problems, and (iii) to provide a tolerance analysis tool which can be incorporated into a CAD or solid modeling system.

  15. Statistical Tolerance and Clearance Analysis for Assembly

    NASA Technical Reports Server (NTRS)

    Lee, S.; Yi, C.

    1996-01-01

    Tolerance is inevitable because manufacturing exactly equal parts is known to be impossible. Furthermore, the specification of tolerances is an integral part of product design since tolerances directly affect the assemblability, functionality, manufacturability, and cost effectiveness of a product. In this paper, we present statistical tolerance and clearance analysis for the assembly. Our proposed work is expected to make the following contributions: (i) to help the designers to evaluate products for assemblability, (ii) to provide a new perspective to tolerance problems, and (iii) to provide a tolerance analysis tool which can be incorporated into a CAD or solid modeling system.

  16. Tip Clearance Control Using Plasma Actuators

    DTIC Science & Technology

    2007-03-01

    Clearance Control Using Plasma Actuators 4 posed by Denton (1993). A number of investigators have used partial shrouds, or " winglet " designs to...main molded blade with a span of 3.42 in., a removable molded blade segment with a span of 0.1875 in., and removable blade tip winglets made of glass...segment and the main blade to vary the distance between the blade end and the front wall of the cascade section. The winglets were machined using a

  17. Numerical investigation of hub clearance flow in a Kaplan turbine

    NASA Astrophysics Data System (ADS)

    Wu, H.; Feng, J. J.; Wu, G. K.; Luo, X. Q.

    2012-11-01

    In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

  18. Study of blade clearance effects on centrifugal pumps

    NASA Technical Reports Server (NTRS)

    Hoshide, R. K.; Nielson, C. E.

    1972-01-01

    A program of analysis, design, fabrication, and testing has been conducted to develop and experimentally verify analytical models to predict the effects of impeller blade clearance on centrifugal pumps. The effect of tip clearance on pump efficiency, and the relationship between the head coefficient and torque loss with tip clearance was established. Analysis were performed to determine the cost variation in design, manufacture, and test that would occur between unshrouded and shrouded impellers. An impeller, representative of typical rocket engine impellers, was modified by removing its front shroud to permit variation of its blade clearances. It was tested in water with special instrumentation to provide measurements of blade surface pressures during operation. Pump performance data were obtained from tests at various impeller tip clearances. Blade pressure data were obtained at the nominal tip clearance. Comparisons of predicted and measured data are given.

  19. Dynamics analysis of space robot manipulator with joint clearance

    NASA Astrophysics Data System (ADS)

    Zhao, Yang; Bai, Zheng Feng

    2011-04-01

    A computational methodology for analysis of space robot manipulator systems, considering the effects of the clearances in the joint, is presented. The contact dynamics model in joint clearance is established using the nonlinear equivalent spring-damp model and the friction effect is considered using the Coulomb friction model. The space robot system dynamic equation of manipulator with clearance is established. Then the dynamics simulation is presented and the dynamics characteristics of robot manipulator with clearance are analyzed. This work provides a practical method to analyze the dynamics characteristics of space robot manipulator with joint clearance and improves the engineering application. The computational methodology can predict the effects of clearance on space robot manipulator preferably, which is the basis of space robot manipulator design, precision analysis and ground test.

  20. CF6 High Pressure Compressor and Turbine Clearance Evaluations

    NASA Technical Reports Server (NTRS)

    Radomski, M. A.; Cline, L. D.

    1981-01-01

    In the CF6 Jet Engine Diagnostics Program the causes of performance degradation were determined for each component of revenue service engines. It was found that a significant contribution to performance degradation was caused by increased airfoil tip radial clearances in the high pressure compressor and turbine areas. Since the influence of these clearances on engine performance and fuel consumption is significant, it is important to accurately establish these relatonships. It is equally important to understand the causes of clearance deterioration so that they can be reduced or eliminated. The results of factory engine tests run to enhance the understanding of the high pressure compressor and turbine clearance effects on performance are described. The causes of clearance deterioration are indicated and potential improvements in clearance control are discussed.

  1. Impact of convective transport on dialyzer clearance.

    PubMed

    Galach, Magda; Ciechanowska, Anna; Sabalińska, Stanislawa; Waniewski, Jacek; Wójcicki, Jan; Weryńskis, Andrzej

    2003-01-01

    The results of predictions of three mathematical models used to describe the impact of convective flow on dialyzer clearance are presented. These models are based on the ordinary differential equations, which describe changes of solute concentration and solute and fluid flows along the module length. One of the models takes into consideration the existence of the boundary layers on both sides of the membrane wall, by including in the equations two parameters kB and kD, which describe mass transport coefficients in blood and dialysate, respectively. In the second model, the boundary layers are included in one lumped membrane permeability parameter. The diffusive membrane permeability was calculated from pure diffusive clearance, which was taken from experimental results. In the third model, a linear dependence of transmittance coefficient and ultrafiltration flow was proposed. The theoretical results were compared with data obtained in experiments carried out in vitro with four types of high-flux hollow-fiber dialyzers. The comparisons demonstrate that the first two models are of similar accuracy and the third model is not suitable for small solutes.

  2. Physiotherapy for airway clearance in adults.

    PubMed

    Pryor, J A

    1999-12-01

    Techniques for augmenting, when necessary, the normal mucociliary and cough clearance mechanisms of the lungs are not new, but, in more recent years, techniques have been developed which are effective, comfortable and can be used independent of an assistant in the majority of adolescents and adults. Postural drainage with chest clapping and chest shaking has, in most parts of the world, been replaced by the more effective techniques of the active cycle of breathing, autogenic drainage, R-C Cornet, Flutter, positive expiratory pressure mask, high-frequency chest wall oscillation and intrapulmonary percussive ventilation. Glossopharyngeal breathing is being considered again and is often a useful technique for increasing the effectiveness of cough in patients with tetraplegia or neuromuscular disorders. The evidence in support of these techniques is variable, and the literature is confusing and conflicting. There may or may not be significant differences among the techniques in the short or long term. Many of the regimens now include the forced expiratory manoeuvre of a "huff" and this has probably increased the effectiveness of airway clearance. If objective differences are small, individual preferences and cultural influences may be significant in increasing adherence to treatment and in the selection of an appropriate regimen or regimens for an individual patient.

  3. Deposition and clearance of inhaled particles.

    PubMed Central

    Stuart, B O

    1984-01-01

    Theoretical models of respiratory tract deposition of inhaled particles are compared to experimental studies of deposition patterns in humans and animals, as governed principally by particle size, density, respiratory rate and flow parameters. Various models of inhaled particle deposition make use of approximations of the respiratory tract to predict fractional deposition caused by fundamental physical processes of particle impaction, sedimentation, and diffusion. These models for both total deposition and regional (nasopharyngeal, tracheobronchial, and pulmonary) deposition are compared with early and recent experimental studies. Reasonable correlation has been obtained between theoretical and experimental studies, but the behavior in the respiratory tract of very fine (less than 0.1 micron) particles requires further investigation. Properties of particle shape, charge and hygroscopicity as well as the degree of respiratory tract pathology also influence deposition patterns; definitive experimental work is needed in these areas. The influence upon deposition patterns of dynamic alterations in inspiratory flow profiles caused by a variety of breathing patterns also requires further study, and the use of differing ventilation techniques with selected inhaled particle sizes holds promise in diagnosis of respiratory tract diseases. Mechanisms of conducting airway and alveolar clearance processes involving the pulmonary macrophage, mucociliary clearance, dissolution, transport to systemic circulation, and translocation via regional lymphatic vessels are discussed. PMID:6376108

  4. Measuring foot placement and clearance during stair descent.

    PubMed

    Muhaidat, Jennifer; Kerr, Andrew; Rafferty, Danny; Skelton, Dawn A; Evans, Jonathan J

    2011-03-01

    Falls during stair descent are a serious problem and can lead to accidental death. Inappropriate foot placement on, and clearance over, steps have been identified as causes for falls on stairs. This study investigated a new method for measuring placement and clearance during stair descent in 10 healthy young subjects. The effect of foot length was accounted for during the measurement of foot placement by calculating the percentage length of the foot overhanging the step. Foot clearance was measured as the resultant of the minimum vertical and horizontal distances from the heel of the foot to the edge of the step. Clearance was divided into landing and passing clearance depending on the planned placement of the foot in relation to the step edge being cleared. Each subject performed seven trials of stairs descent. Mean (SD) and CV (SD) were 16% (6), 0.28 (0.15) for placement; 45.88 (10.05), 0.21 (0.07) for landing clearance; 107.25 (5.59), 0.25 (0.08) for passing clearance. There was no statistically significant effect of trial on placement and clearance (p>0.05). There was a significant effect of step number on landing and passing clearance (p=0.01, p<0.001 respectively). Landing and passing clearances were greater for the third step compared to the second step. Passing clearance was also significantly greater than landing clearance (p<0.001). The repeatable methods and findings from this study might be useful in providing a technical background and normal values for the design of future gait studies on stairs.

  5. Airway clearance techniques in the treatment of cystic fibrosis.

    PubMed

    McIlwaine, M P; Davidson, A G

    1996-11-01

    Airway clearance is a major component of the management of cystic fibrosis. In North America, the airway clearance technique of choice has been physiotherapy using postural drainage combined with chest percussion, deep breathing and vibration. The disadvantages of this technique, the introduction of newer airway clearance techniques, and a greater emphasis on exercise has sparked a growing trend to prescribing individualized programs combining exercise with strategies adapted to the needs of each patient.

  6. Modeling of Inhalation Administration of Vapors with Capacity Limited Clearance.

    DTIC Science & Technology

    1982-07-12

    airways and vapors. 20. ABSTRACT (Continue en reverse side It neceeer mod identify by block’ mber) :o-*actors, affecting dependence of metabolic clearance ...Administration of Vapors Interim Scientific Report with Capacity Limited Clearance 6-30-81 until 6-30-82 6. PERFORMING O1G. REPORT NUMBER 7. AUTHOR(e) 8...capacity limited metabolism, computer, gases, interaction of vapors in the body, intrinsic clearance , multi-compartmental simulation model, respiratory

  7. Application of clearance automatic laser inspection system to clearance measurement of concrete waste

    SciTech Connect

    Sasaki, Michiya; Ogino, Haruyuki; Hattori, Takatoshi

    2007-07-01

    Recently, the Clearance Automatic Laser Inspection System (CLALIS) has been developed for the clearance measurement of metal scraps. It utilizes three-dimensional (3D) laser scanning, y-ray measurement and Monte Carlo calculation, and has outstanding detection ability. For the clearance measurement of concrete segments, the effect of background (BG) gamma rays from natural radionuclides in the measurement target, such as K-40 and the radioactive decay products of Th-232 and U-238, should be compensated for to ensure adequate waste management. Since NE102A plastic scintillation detectors are used for y-ray measurement in CLALIS, it is impossible to distinguish between count rates of natural radionuclides and contaminants on the basis of gamma-ray energy information. To apply CLALIS to the clearance measurement of concrete segments, the original activity evaluation method was improved by adding a new compensation procedure. In this procedure, BG count rate due to natural radionuclides is estimated by a Monte Carlo calculation with pre-analyzed data of a representative sample of the measurement target. The activity concentration of natural radionuclides in concrete differs markedly depending on the production location of its components, such as cement and aggregates. In this study, using six mock concrete waste samples, which were composed of cement and fine aggregate from various production locations, the accuracy of BG compensation was experimentally estimated. In addition, the accuracy of calibration for concrete waste was also estimated using a number of mock concrete segments of small and large triangular prisms. By considering the uncertainties of BG compensation and calibration, the detection limit of CLALIS for concrete waste was estimated. As a result, it was revealed that CLALIS could be applied to the clearance measurement of concrete segments when the mass of the measurement target is greater than approximately 1.1 kg and the key radionuclide is Co-60

  8. Management Planning for Workplace Automation.

    ERIC Educational Resources Information Center

    McDole, Thomas L.

    Several factors must be considered when implementing office automation. Included among these are whether or not to automate at all, the effects of automation on employees, requirements imposed by automation on the physical environment, effects of automation on the total organization, and effects on clientele. The reasons behind the success or…

  9. Laboratory Automation and Middleware.

    PubMed

    Riben, Michael

    2015-06-01

    The practice of surgical pathology is under constant pressure to deliver the highest quality of service, reduce errors, increase throughput, and decrease turnaround time while at the same time dealing with an aging workforce, increasing financial constraints, and economic uncertainty. Although not able to implement total laboratory automation, great progress continues to be made in workstation automation in all areas of the pathology laboratory. This report highlights the benefits and challenges of pathology automation, reviews middleware and its use to facilitate automation, and reviews the progress so far in the anatomic pathology laboratory.

  10. Complacency and Automation Bias in the Use of Imperfect Automation.

    PubMed

    Wickens, Christopher D; Clegg, Benjamin A; Vieane, Alex Z; Sebok, Angelia L

    2015-08-01

    We examine the effects of two different kinds of decision-aiding automation errors on human-automation interaction (HAI), occurring at the first failure following repeated exposure to correctly functioning automation. The two errors are incorrect advice, triggering the automation bias, and missing advice, reflecting complacency. Contrasts between analogous automation errors in alerting systems, rather than decision aiding, have revealed that alerting false alarms are more problematic to HAI than alerting misses are. Prior research in decision aiding, although contrasting the two aiding errors (incorrect vs. missing), has confounded error expectancy. Participants performed an environmental process control simulation with and without decision aiding. For those with the aid, automation dependence was created through several trials of perfect aiding performance, and an unexpected automation error was then imposed in which automation was either gone (one group) or wrong (a second group). A control group received no automation support. The correct aid supported faster and more accurate diagnosis and lower workload. The aid failure degraded all three variables, but "automation wrong" had a much greater effect on accuracy, reflecting the automation bias, than did "automation gone," reflecting the impact of complacency. Some complacency was manifested for automation gone, by a longer latency and more modest reduction in accuracy. Automation wrong, creating the automation bias, appears to be a more problematic form of automation error than automation gone, reflecting complacency. Decision-aiding automation should indicate its lower degree of confidence in uncertain environments to avoid the automation bias. © 2015, Human Factors and Ergonomics Society.

  11. ESR measurement of radical clearance in lung of whole mouse

    SciTech Connect

    Takeshita, K.; Utsumi, H.; Hamada, A. )

    1991-06-14

    Clearance of the nitroxide radicals, hydroxy-TEMPO and carboxy-PROxYL, in whole-mouse lung was directly measured by in vivo ESR. After injecting a nitroxide radical, distribution of the nitroxide radical all over the lung was confirmed by ESR imaging. The ESR signal of hydroxy-TEMPO was reduced in the lung and the clearance obeyed first-order kinetics, whereas the signal of carboxy-PROxYL remained constant. Comparison of the clearance rates of live and dead mice indicated the presence of 2 different clearance systems in the lung: loss of its paramagnetism in the lung, and transfer from alveolar to the blood circulation system.

  12. Fuel conservation through active control of rotor clearances

    NASA Technical Reports Server (NTRS)

    Beitler, R. S.; Saunders, A. A.; Wanger, R. P.

    1980-01-01

    Under the NASA-sponsored Energy Efficient Engine (EEE) Project, technology is being developed which will significantly reduce the fuel consumption of turbofan engines for subsonic transport aircraft. One technology concept being pursued is active control of rotor tip clearances. Attention is given to rotor tip clearance considerations and an overview of preliminary study results as well as the General Electric EEE clearance control approach is presented. Finally, potential fuel savings with active control of rotor clearances for a typical EEE mission are predicted.

  13. CSF clearance in Alzheimer Disease measured with dynamic PET.

    PubMed

    de Leon, Mony J; Li, Yi; Okamura, Nobuyuki; Tsui, Wai H; Saint Louis, Les A; Glodzik, Lidia; Osorio, Ricardo S; Fortea, Juan; Butler, Tracy; Pirraglia, Elizabeth; Fossati, Silvia; Kim, Hee-Jin; Carare, Roxana O; Nedergaard, Maiken; Benveniste, Helene; Rusinek, Henry

    2017-03-16

    Evidence supporting the hypothesis that reduced cerebrospinal fluid (CSF) clearance is involved in the pathophysiology of Alzheimer's disease (AD) comes from primarily from rodent models. However, unlike rodents where predominant extra-cranial CSF egress is via olfactory nerves traversing the cribriform plate, human CSF clearance pathways are not well characterized. Using dynamic Positron Emission Tomography (PET) with (18)F-THK5117 a tracer for tau pathology, the ventricular CSF time activity was used as a biomarker for CSF clearance. We tested three hypotheses: 1. Extra-cranial CSF is detected at the superior turbinates; 2. CSF clearance is reduced in AD; and 3. CSF clearance is inversely associated with amyloid deposition. Methods: 15 subjects, 8 with AD and 7 normal control volunteers were examined with (18)F-THK5117. 10 subjects additionally received (11)C-PiB PET scans and 8 were PiB positive. Ventricular time activity curves (TAC) of (18)F-THK5117 were used to identify highly correlated TAC from extra-cranial voxels. Results: For all subjects, the greatest density of CSF positive extra-cranial voxels was in the nasal turbinates. Tracer concentration analyses validated the superior nasal turbinate CSF signal intensity. AD patients showed ventricular tracer clearance reduced by 23% and 66% fewer superior turbinate CSF egress sites. Ventricular CSF clearance was inversely associated with amyloid deposition. Conclusion: The human nasal turbinate is part of the CSF clearance system. Lateral ventricle and superior nasal turbinates CSF clearance abnormalities are found in AD. Ventricular CSF clearance reductions are associated with increased brain amyloid depositions. These data suggest that PET measured CSF clearance is a biomarker of potential interest in AD and other neurodegenerative diseases.

  14. Automating checks of plan check automation.

    PubMed

    Halabi, Tarek; Lu, Hsiao-Ming

    2014-07-08

    While a few physicists have designed new plan check automation solutions for their clinics, fewer, if any, managed to adapt existing solutions. As complex and varied as the systems they check, these programs must gain the full confidence of those who would run them on countless patient plans. The present automation effort, planCheck, therefore focuses on versatility and ease of implementation and verification. To demonstrate this, we apply planCheck to proton gantry, stereotactic proton gantry, stereotactic proton fixed beam (STAR), and IMRT treatments.

  15. Automation and Cataloging.

    ERIC Educational Resources Information Center

    Furuta, Kenneth; And Others

    1990-01-01

    These three articles address issues in library cataloging that are affected by automation: (1) the impact of automation and bibliographic utilities on professional catalogers; (2) the effect of the LASS microcomputer software on the cost of authority work in cataloging at the University of Arizona; and (3) online subject heading and classification…

  16. Order Division Automated System.

    ERIC Educational Resources Information Center

    Kniemeyer, Justin M.; And Others

    This publication was prepared by the Order Division Automation Project staff to fulfill the Library of Congress' requirement to document all automation efforts. The report was originally intended for internal use only and not for distribution outside the Library. It is now felt that the library community at-large may have an interest in the…

  17. More Benefits of Automation.

    ERIC Educational Resources Information Center

    Getz, Malcolm

    1988-01-01

    Describes a study that measured the benefits of an automated catalog and automated circulation system from the library user's point of view in terms of the value of time saved. Topics discussed include patterns of use, access time, availability of information, search behaviors, and the effectiveness of the measures used. (seven references)…

  18. Work and Programmable Automation.

    ERIC Educational Resources Information Center

    DeVore, Paul W.

    A new industrial era based on electronics and the microprocessor has arrived, an era that is being called intelligent automation. Intelligent automation, in the form of robots, replaces workers, and the new products, using microelectronic devices, require significantly less labor to produce than the goods they replace. The microprocessor thus…

  19. The Automated Office.

    ERIC Educational Resources Information Center

    Naclerio, Nick

    1979-01-01

    Clerical personnel may be able to climb career ladders as a result of office automation and expanded job opportunities in the word processing area. Suggests opportunities in an automated office system and lists books and periodicals on word processing for counselors and teachers. (MF)

  20. Planning for Office Automation.

    ERIC Educational Resources Information Center

    Sherron, Gene T.

    1982-01-01

    The steps taken toward office automation by the University of Maryland are described. Office automation is defined and some types of word processing systems are described. Policies developed in the writing of a campus plan are listed, followed by a section on procedures adopted to implement the plan. (Author/MLW)

  1. WANTED: Fully Automated Indexing.

    ERIC Educational Resources Information Center

    Purcell, Royal

    1991-01-01

    Discussion of indexing focuses on the possibilities of fully automated indexing. Topics discussed include controlled indexing languages such as subject heading lists and thesauri, free indexing languages, natural indexing languages, computer-aided indexing, expert systems, and the need for greater creativity to further advance automated indexing.…

  2. Improved Flight Test Procedures for Flutter Clearance

    NASA Technical Reports Server (NTRS)

    Lind, Rick C.; Brenner, Martin J.; Freudinger, Lawrence C.

    1997-01-01

    Flight flutter testing is an integral part of flight envelope clearance. This paper discusses advancements in several areas that are being investigated to improve efficiency and safety of flight test programs. Results are presented from recent flight testing of the F/A-18 Systems Research Aircraft. A wingtip excitation system was used to generate aeroelastic response data. This system worked well for many flight conditions but still displayed some anomalies. Wavelet processing is used to analyze the flight data. Filtered transfer functions are generated that greatly improve system identification. A flutter margin is formulated that accounts for errors between a model and flight data. Worst-case flutter margins are computed to demonstrate the flutter boundary may lie closer to the flight envelope than previously estimated. This paper concludes with developments for a distributed flight analysis environment and on-line health monitoring.

  3. Validation of Dose Calculation Codes for Clearance

    SciTech Connect

    Menon, S.; Wirendal, B.; Bjerler, J.; Studsvik; Teunckens, L.

    2003-02-27

    Various international and national bodies such as the International Atomic Energy Agency, the European Commission, the US Nuclear Regulatory Commission have put forward proposals or guidance documents to regulate the ''clearance'' from regulatory control of very low level radioactive material, in order to allow its recycling as a material management practice. All these proposals are based on predicted scenarios for subsequent utilization of the released materials. The calculation models used in these scenarios tend to utilize conservative data regarding exposure times and dose uptake as well as other assumptions as a safeguard against uncertainties. None of these models has ever been validated by comparison with the actual real life practice of recycling. An international project was organized in order to validate some of the assumptions made in these calculation models, and, thereby, better assess the radiological consequences of recycling on a practical large scale.

  4. [Mucociliary clearance function and medicamentous modification].

    PubMed

    Konrad, F

    1996-09-01

    Mucociliary clearance represents a complex self-cleaning mechanism of the lung and is based on the functional unity of ciliated columnar cells and the special viscoelastic properties of the secretion produced in the tracheobronchial system. It has been known for a long time that intubation and mechanical ventilation can impair mucous transport and lead to morphological damage to the tracheobronchial mucosa. Recent studies made it clear, however, that mechanical ventilation during anaesthesia using an appropriate anaesthesiological technique has no deleterious effect on mucus transport in patients with healthy lungs. Ventilated patients in the intensive-care unit frequently have impaired mucus transport, which is associated with the development of retention of secretion and nosocomial pneumonia. In these patients a number of factors combine to form a formidable potential insult to the mucociliary transport mechanism. Numerous drugs can affect mucociliary transport. Beta-mimetics and theophylline, in particular, have a favourable effect on mucociliary transport, whereas the effect of mucolytic agents is controversial.

  5. Miscellaneous losses. [tip clearance and disk friction

    NASA Technical Reports Server (NTRS)

    Roelke, R. J.

    1973-01-01

    The boundary-layer losses associated with the flow process in the blade channel are discussed. To determine the overall design point efficiency of a turbine, other losses must also be considered; these include tip clearance loss and disk friction loss. The sum of these losses normally comprises all the losses that are considered in the design of a full admission axial flow turbine. If, however, a partial admission turbine is being considered, there are additional losses that must be included. The partial admission losses usually considered are the pumping loss in the inactive blade channels and the filling-and-emptying loss in the blade passages as they pass through the admission arc. Finally, a loss that occurs at off-design operation of any turbine is the incidence loss.

  6. Anthrax edema toxin impairs clearance in mice.

    PubMed

    Sastalla, Inka; Tang, Shixing; Crown, Devorah; Liu, Shihui; Eckhaus, Michael A; Hewlett, Indira K; Leppla, Stephen H; Moayeri, Mahtab

    2012-02-01

    The anthrax edema toxin (ET) of Bacillus anthracis is composed of the receptor-binding component protective antigen (PA) and of the adenylyl cyclase catalytic moiety, edema factor (EF). Uptake of ET into cells raises intracellular concentrations of the secondary messenger cyclic AMP, thereby impairing or activating host cell functions. We report here on a new consequence of ET action in vivo. We show that in mouse models of toxemia and infection, serum PA concentrations were significantly higher in the presence of enzymatically active EF. These higher concentrations were not caused by ET-induced inhibition of PA endocytosis; on the contrary, ET induced increased PA binding and uptake of the PA oligomer in vitro and in vivo through upregulation of the PA receptors TEM8 and CMG2 in both myeloid and nonmyeloid cells. ET effects on protein clearance from circulation appeared to be global and were not limited to PA. ET also impaired the clearance of ovalbumin, green fluorescent protein, and EF itself, as well as the small molecule biotin when these molecules were coinjected with the toxin. Effects on injected protein levels were not a result of general increase in protein concentrations due to fluid loss. Functional markers for liver and kidney were altered in response to ET. Concomitantly, ET caused phosphorylation and activation of the aquaporin-2 water channel present in the principal cells of the collecting ducts of the kidneys that are responsible for fluid homeostasis. Our data suggest that in vivo, ET alters circulatory protein and small molecule pharmacokinetics by an as-yet-undefined mechanism, thereby potentially allowing a prolonged circulation of anthrax virulence factors such as EF during infection.

  7. Advances in inspection automation

    NASA Astrophysics Data System (ADS)

    Weber, Walter H.; Mair, H. Douglas; Jansen, Dion; Lombardi, Luciano

    2013-01-01

    This new session at QNDE reflects the growing interest in inspection automation. Our paper describes a newly developed platform that makes the complex NDE automation possible without the need for software programmers. Inspection tasks that are tedious, error-prone or impossible for humans to perform can now be automated using a form of drag and drop visual scripting. Our work attempts to rectify the problem that NDE is not keeping pace with the rest of factory automation. Outside of NDE, robots routinely and autonomously machine parts, assemble components, weld structures and report progress to corporate databases. By contrast, components arriving in the NDT department typically require manual part handling, calibrations and analysis. The automation examples in this paper cover the development of robotic thickness gauging and the use of adaptive contour following on the NRU reactor inspection at Chalk River.

  8. Automation in Immunohematology

    PubMed Central

    Bajpai, Meenu; Kaur, Ravneet; Gupta, Ekta

    2012-01-01

    There have been rapid technological advances in blood banking in South Asian region over the past decade with an increasing emphasis on quality and safety of blood products. The conventional test tube technique has given way to newer techniques such as column agglutination technique, solid phase red cell adherence assay, and erythrocyte-magnetized technique. These new technologies are adaptable to automation and major manufacturers in this field have come up with semi and fully automated equipments for immunohematology tests in the blood bank. Automation improves the objectivity and reproducibility of tests. It reduces human errors in patient identification and transcription errors. Documentation and traceability of tests, reagents and processes and archiving of results is another major advantage of automation. Shifting from manual methods to automation is a major undertaking for any transfusion service to provide quality patient care with lesser turnaround time for their ever increasing workload. This article discusses the various issues involved in the process. PMID:22988378

  9. Clearance systems in the brain—implications for Alzheimer disease

    PubMed Central

    Tarasoff-Conway, Jenna M.; Carare, Roxana O.; Osorio, Ricardo S.; Glodzik, Lidia; Butler, Tracy; Fieremans, Els; Axel, Leon; Rusinek, Henry; Nicholson, Charles; Zlokovic, Berislav V.; Frangione, Blas; Blennow, Kaj; Ménard, Joël; Zetterberg, Henrik; Wisniewski, Thomas; de Leon, Mony J.

    2015-01-01

    Accumulation of toxic protein aggregates—amyloid-β (Aβ) plaques and hyperphosphorylated tau tangles—is the pathological hallmark of Alzheimer disease (AD). Aβ accumulation has been hypothesized to result from an imbalance between Aβ production and clearance; indeed, Aβ clearance seems to be impaired in both early and late forms of AD. To develop efficient strategies to slow down or halt AD, it is critical to understand how Aβ is cleared from the brain. Extracellular Aβ deposits can be removed from the brain by various clearance systems, most importantly, transport across the blood–brain barrier. Findings from the past few years suggest that astroglial-mediated interstitial fluid (ISF) bulk flow, known as the glymphatic system, might contribute to a larger portion of extracellular Aβ (eAβ) clearance than previously thought. The meningeal lymphatic vessels, discovered in 2015, might provide another clearance route. Because these clearance systems act together to drive eAβ from the brain, any alteration to their function could contribute to AD. An understanding of Aβ clearance might provide strategies to reduce excess Aβ deposits and delay, or even prevent, disease onset. In this Review, we describe the clearance systems of the brain as they relate to proteins implicated in AD pathology, with the main focus on Aβ. PMID:26195256

  10. 48 CFR 32.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contract finance office clearance. 32.502-2 Section 32.502-2 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... finance office clearance. The contracting officer shall obtain the approval of the contract finance office...

  11. 48 CFR 1432.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract finance office clearance. 1432.502-2 Section 1432.502-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... finance office clearance. The CO shall obtain approval of the bureau finance office prior to taking...

  12. 48 CFR 832.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract finance office clearance. 832.502-2 Section 832.502-2 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... finance office clearance. Contracting officers must obtain approval from the DSPE before taking the...

  13. 32 CFR 644.527 - Recording Statements of Clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Recording Statements of Clearance. 644.527 Section 644.527 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed...

  14. Lung fluid clearance in chronic heart failure patients.

    PubMed

    Dixon, Dani-Louise; De Pasquale, Carmine G; Lawrence, Mark D; Cavallaro, Elena; Rubino, Vito; Bersten, Andrew D

    2017-10-01

    Chronic elevation of pulmonary microvascular pressure (Pmv) consistently leads to alveolocapillary barrier thickening and reduction in the filtration coefficient. In animal models of chronic heart failure (CHF) the lung remains dry despite hydrostatic forces. As fluid flux is bi-directional, it has been postulated that an increase in alveolar fluid clearance may facilitate the dry lung when Pmv is chronically elevated. In this study we aimed to examine alveolar fluid clearance in ambulatory patients with CHF secondary to left ventricular (LV) systolic dysfunction compared against non-CHF controls. Lung clearance following aerosol delivery of (99m)technetium (Tc)-diethyl triaminepentaacetic acid (DTPA) was measured non-invasively by scintigraphy and half time of (99m)Tc-DTPA clearance (T (1/2)) was calculated by mono-exponential curve fit. Alveolar fluid clearance measured as half time DTPA clearance was significantly faster in CHF patients than controls (P=0.001). This was further defined by NYHA classification. No correlation was found between DTPA clearance and plasma epinephrine, norepinephrine or aldosterone hormone (P>0.05). Our results support an association between increasing alveolar fluid clearance and disease severity in CHF, and the concept of controlled bi-directional fluid flux in CHF associated with increasing Pmv, and represents another defence mechanism of the lung against pulmonary oedema. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  15. 32 CFR 644.69 - Title Clearance-Easements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Title Clearance-Easements. 644.69 Section 644.69 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Acquisition Procurement of Title Evidence, Title Clearance, and Closings § 644.69 Title...

  16. 32 CFR 644.516 - Clearance of Air Force lands.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Clearance of Air Force lands. 644.516 Section 644... Excess Land and Improvements § 644.516 Clearance of Air Force lands. The Chief of Engineers has no responsibility for inspecting or clearing excess Air Force land of explosives or chemical/biological contaminants...

  17. 32 CFR 644.522 - Clearance of military scrap.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Clearance of military scrap. 644.522 Section 644... Excess Land and Improvements § 644.522 Clearance of military scrap. Military scrap can contain or be... determining whether scrap metal will be removed should be the safety of persons coming on the land in question...

  18. 32 CFR 644.522 - Clearance of military scrap.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Clearance of military scrap. 644.522 Section 644... Excess Land and Improvements § 644.522 Clearance of military scrap. Military scrap can contain or be... determining whether scrap metal will be removed should be the safety of persons coming on the land in question...

  19. 32 CFR 644.516 - Clearance of Air Force lands.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Clearance of Air Force lands. 644.516 Section 644... Excess Land and Improvements § 644.516 Clearance of Air Force lands. The Chief of Engineers has no responsibility for inspecting or clearing excess Air Force land of explosives or chemical/biological...

  20. 32 CFR 644.516 - Clearance of Air Force lands.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Clearance of Air Force lands. 644.516 Section 644... Excess Land and Improvements § 644.516 Clearance of Air Force lands. The Chief of Engineers has no responsibility for inspecting or clearing excess Air Force land of explosives or chemical/biological...

  1. 32 CFR 644.516 - Clearance of Air Force lands.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Clearance of Air Force lands. 644.516 Section... Excess Land and Improvements § 644.516 Clearance of Air Force lands. The Chief of Engineers has no responsibility for inspecting or clearing excess Air Force land of explosives or chemical/biological...

  2. 32 CFR 644.516 - Clearance of Air Force lands.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Clearance of Air Force lands. 644.516 Section... Excess Land and Improvements § 644.516 Clearance of Air Force lands. The Chief of Engineers has no responsibility for inspecting or clearing excess Air Force land of explosives or chemical/biological...

  3. 48 CFR 952.204-73 - Facility clearance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....204-73 Section 952.204-73 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... granted by the Secretary of Energy. In addition, a Facility Clearance and foreign ownership, control and... Department of Energy Facility Clearance generally need not resubmit the following foreign...

  4. 14 CFR 29.411 - Ground clearance: tail rotor guard.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ground clearance: tail rotor guard. 29.411 Section 29.411 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... System Loads § 29.411 Ground clearance: tail rotor guard. (a) It must be impossible for the tail rotor...

  5. 5 CFR 720.307 - Interagency report clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Interagency report clearance. 720.307 Section 720.307 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... Interagency report clearance. The reports contained in this regulation have been cleared in accordance...

  6. 10 CFR 95.53 - Termination of facility clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Termination of facility clearance. 95.53 Section 95.53 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FACILITY SECURITY CLEARANCE AND SAFEGUARDING OF NATIONAL SECURITY INFORMATION AND RESTRICTED DATA Control of Information § 95.53 Termination of facility...

  7. 48 CFR 245.7310-8 - Antitrust clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Antitrust clearance. 245.7310-8 Section 245.7310-8 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... Antitrust clearance. When property with an acquisition cost of $3 million or more is to be sold, include...

  8. 14 CFR 93.311 - Minimum terrain clearance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Minimum terrain clearance. 93.311 Section 93.311 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED... of Grand Canyon National Park, AZ § 93.311 Minimum terrain clearance. Except in an emergency,...

  9. 33 CFR 160.115 - Withholding of clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Withholding of clearance. 160.115... § 160.115 Withholding of clearance. Each District Commander or Captain of the Port may request the Secretary of the Treasury, or the authorized representative thereof, to withhold or revoke the...

  10. 19 CFR 122.26 - Entry and clearance.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Entry and clearance. 122.26 Section 122.26 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... information as set forth in § 122.22(c), and grants electronic clearance via electronic mail or telephone....

  11. 20 CFR 655.150 - Interstate clearance of job order.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 20 Employees' Benefits 3 2013-04-01 2013-04-01 false Interstate clearance of job order. 655.150... job order. (a) SWA posts in interstate clearance system. The SWA must promptly place the job order in... transmit a copy of its active job order to all States listed in the job order as anticipated worksites...

  12. 20 CFR 655.150 - Interstate clearance of job order.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 3 2014-04-01 2014-04-01 false Interstate clearance of job order. 655.150... job order. (a) SWA posts in interstate clearance system. The SWA must promptly place the job order in... transmit a copy of its active job order to all States listed in the job order as anticipated worksites...

  13. 20 CFR 655.150 - Interstate clearance of job order.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 3 2012-04-01 2012-04-01 false Interstate clearance of job order. 655.150... job order. (a) SWA posts in interstate clearance system. The SWA must promptly place the job order in... transmit a copy of its active job order to all States listed in the job order as anticipated worksites...

  14. 20 CFR 655.150 - Interstate clearance of job order.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Interstate clearance of job order. 655.150... job order. (a) SWA posts in interstate clearance system. The SWA must promptly place the job order in... transmit a copy of its active job order to all States listed in the job order as anticipated worksites...

  15. 14 CFR 29.411 - Ground clearance: tail rotor guard.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ground clearance: tail rotor guard. 29.411 Section 29.411 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... System Loads § 29.411 Ground clearance: tail rotor guard. (a) It must be impossible for the tail rotor to...

  16. 14 CFR 29.411 - Ground clearance: tail rotor guard.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ground clearance: tail rotor guard. 29.411 Section 29.411 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... System Loads § 29.411 Ground clearance: tail rotor guard. (a) It must be impossible for the tail rotor to...

  17. 14 CFR 29.411 - Ground clearance: tail rotor guard.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Ground clearance: tail rotor guard. 29.411 Section 29.411 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... System Loads § 29.411 Ground clearance: tail rotor guard. (a) It must be impossible for the tail rotor to...

  18. 14 CFR 29.411 - Ground clearance: tail rotor guard.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ground clearance: tail rotor guard. 29.411 Section 29.411 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... System Loads § 29.411 Ground clearance: tail rotor guard. (a) It must be impossible for the tail rotor to...

  19. 78 FR 77027 - Overhead Clearance (Air-Draft) Accidents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... SECURITY Coast Guard 33 CFR Parts 117, 161, and 164 46 CFR Part 4 Overhead Clearance (Air-Draft) Accidents... address the problem of overhead clearance (air-draft) accidents. In its petition, which calls for vessel masters to be provided with accurate vertical air draft information, a maritime organization has...

  20. 32 CFR 644.522 - Clearance of military scrap.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Clearance of military scrap. 644.522 Section 644... Excess Land and Improvements § 644.522 Clearance of military scrap. Military scrap can contain or be... destruction, by using command, of all military scrap and scrap metal from lands suitable for cultivation...

  1. 32 CFR 644.522 - Clearance of military scrap.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Clearance of military scrap. 644.522 Section 644... Excess Land and Improvements § 644.522 Clearance of military scrap. Military scrap can contain or be... destruction, by using command, of all military scrap and scrap metal from lands suitable for cultivation...

  2. 32 CFR 644.522 - Clearance of military scrap.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Clearance of military scrap. 644.522 Section 644... Excess Land and Improvements § 644.522 Clearance of military scrap. Military scrap can contain or be... destruction, by using command, of all military scrap and scrap metal from lands suitable for cultivation...

  3. Allometric scaling for predicting human clearance of bisphenol A

    SciTech Connect

    Collet, Séverine H. Picard-Hagen, Nicole Lacroix, Marlène Z. Puel, Sylvie Viguié, Catherine Bousquet-Melou, Alain Toutain, Pierre-Louis Gayrard, Véronique

    2015-05-01

    The investigation of interspecies differences in bisphenol A (BPA) pharmacokinetics (PK) may be useful for translating findings from animal studies to humans, identifying major processes involved in BPA clearance mechanisms, and predicting BPA PK parameters in man. For the first time, a large range of species in terms of body weight, from 0.02 kg (mice) to 495 kg (horses) was used to predict BPA clearance in man by an allometric approach. BPA PK was evaluated after intravenous administration of BPA in horses, sheep, pigs, dogs, rats and mice. A non-compartmental analysis was used to estimate plasma clearance and steady state volume of distribution and predict BPA PK parameters in humans from allometric scaling. In all the species investigated, BPA plasma clearance was high and of the same order of magnitude as their respective hepatic blood flow. By an allometric scaling, the human clearance was estimated to be 1.79 L/min (equivalent to 25.6 mL/kg.min) with a 95% prediction interval of 0.36 to 8.83 L/min. Our results support the hypothesis that there are highly efficient and hepatic mechanisms of BPA clearance in man. - Highlights: • Allometric scaling was used to predict BPA pharmacokinetic parameters in humans. • In all species, BPA plasma clearance approached hepatic blood flow. • Human BPA clearance was estimated to be 1.79 L/min.

  4. Mechanistic evaluation of virus clearance by depth filtration.

    PubMed

    Venkiteshwaran, Adith; Fogle, Jace; Patnaik, Purbasa; Kowle, Ron; Chen, Dayue

    2015-01-01

    Virus clearance by depth filtration has not been well-understood mechanistically due to lack of quantitative data on filter charge characteristics and absence of systematic studies. It is generally believed that both electrostatic interactions and sized based mechanical entrapment contribute to virus clearance by depth filtration. In order to establish whether the effectiveness of virus clearance correlates with the charge characteristics of a given depth filter, a counter-ion displacement technique was employed to determine the ionic capacity for several depth filters. Two depth filters (Millipore B1HC and X0HC) with significant differences in ionic capacities were selected and evaluated for their ability to eliminate viruses. The high ionic capacity X0HC filter showed complete porcine parvovirus (PPV) clearance (eliminating the spiked viruses to below the limit of detection) under low conductivity conditions (≤2.5 mS/cm), achieving a log10 reduction factor (LRF) of > 4.8. On the other hand, the low ionic capacity B1HC filter achieved only ∼2.1-3.0 LRF of PPV clearance under the same conditions. These results indicate that parvovirus clearance by these two depth filters are mainly achieved via electrostatic interactions between the filters and PPV. When much larger xenotropic murine leukemia virus (XMuLV) was used as the model virus, complete retrovirus clearance was obtained under all conditions evaluated for both depth filters, suggesting the involvement of mechanisms other than just electrostatic interactions in XMuLV clearance.

  5. 76 FR 17978 - Agency Information Collection Activities: Emergency Clearance Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... From the Federal Register Online via the Government Publishing Office SOCIAL SECURITY ADMINISTRATION Agency Information Collection Activities: Emergency Clearance Request The Social Security Administration (SSA) publishes a list of information collection packages requiring clearance by the Office of Management and Budget (OMB) in compliance...

  6. 7 CFR 1927.55 - Title clearance services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 12 2012-01-01 2012-01-01 false Title clearance services. 1927.55 Section 1927.55 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE PROGRAM REGULATIONS TITLE CLEARANCE AND...

  7. 32 CFR 644.69 - Title Clearance-Easements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Title Clearance-Easements. 644.69 Section 644.69 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Acquisition Procurement of Title Evidence, Title Clearance, and Closings § 644.69 Title Clearance—Easements. (a)...

  8. 32 CFR 644.69 - Title Clearance-Easements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Title Clearance-Easements. 644.69 Section 644.69 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Acquisition Procurement of Title Evidence, Title Clearance, and Closings § 644.69 Title Clearance—Easements. (a)...

  9. 32 CFR 644.69 - Title Clearance-Easements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Title Clearance-Easements. 644.69 Section 644.69 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Acquisition Procurement of Title Evidence, Title Clearance, and Closings § 644.69 Title Clearance—Easements. (a)...

  10. 7 CFR 1927.55 - Title clearance services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 12 2014-01-01 2013-01-01 true Title clearance services. 1927.55 Section 1927.55 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE PROGRAM REGULATIONS TITLE CLEARANCE AND...

  11. 33 CFR 118.160 - Vertical clearance gauges.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Vertical clearance gauges. 118.160 Section 118.160 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.160 Vertical clearance gauges. (a) When necessary for...

  12. 33 CFR 118.160 - Vertical clearance gauges.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Vertical clearance gauges. 118.160 Section 118.160 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.160 Vertical clearance gauges. (a) When necessary for...

  13. 32 CFR 644.527 - Recording Statements of Clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Recording Statements of Clearance. 644.527 Section 644.527 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from Proposed...

  14. 49 CFR 229.71 - Clearance above top of rail.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Clearance above top of rail. 229.71 Section 229.71....71 Clearance above top of rail. No part or appliance of a locomotive except the wheels, flexible nonmetallic sand pipe extension tips, and trip cock arms may be less than 21/2 inches above the top of rail....

  15. 49 CFR 229.71 - Clearance above top of rail.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Clearance above top of rail. 229.71 Section 229.71....71 Clearance above top of rail. No part or appliance of a locomotive except the wheels, flexible nonmetallic sand pipe extension tips, and trip cock arms may be less than 21/2 inches above the top of rail....

  16. 32 CFR 644.521 - Limitations on clearance cost.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Limitations on clearance cost. 644.521 Section 644.521 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other Contamination from...

  17. Benefits of Improved HP Turbine Active Clearance Control

    NASA Technical Reports Server (NTRS)

    Ruiz, Rafael; Albers, Bob; Sak, Wojciech; Seitzer, Ken; Steinetz, Bruce M.

    2007-01-01

    As part of the NASA Propulsion 21 program, GE Aircraft Engines was contracted to develop an improved high pressure turbine(HPT) active clearance control (ACC) system. The system is envisioned to minimize blade tip clearances to improve HPT efficiency throughout the engine operation range simultaneously reducing fuel consumption and emissions.

  18. 48 CFR 32.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Contract finance office clearance. 32.502-2 Section 32.502-2 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... finance office clearance. The contracting officer shall obtain the approval of the contract finance...

  19. 48 CFR 32.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Contract finance office clearance. 32.502-2 Section 32.502-2 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... finance office clearance. The contracting officer shall obtain the approval of the contract finance...

  20. 48 CFR 1432.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Contract finance office clearance. 1432.502-2 Section 1432.502-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... finance office clearance. The CO shall obtain approval of the bureau finance office prior to...

  1. 48 CFR 1432.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Contract finance office clearance. 1432.502-2 Section 1432.502-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... finance office clearance. The CO shall obtain approval of the bureau finance office prior to...

  2. 48 CFR 832.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Contract finance office clearance. 832.502-2 Section 832.502-2 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... finance office clearance. Contracting officers must obtain approval from the DSPE before taking...

  3. 48 CFR 832.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Contract finance office clearance. 832.502-2 Section 832.502-2 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... finance office clearance. Contracting officers must obtain approval from the DSPE before taking...

  4. 48 CFR 1432.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Contract finance office clearance. 1432.502-2 Section 1432.502-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... finance office clearance. The CO shall obtain approval of the bureau finance office prior to...

  5. 48 CFR 832.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Contract finance office clearance. 832.502-2 Section 832.502-2 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... finance office clearance. Contracting officers must obtain approval from the DSPE before taking...

  6. 48 CFR 32.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract finance office clearance. 32.502-2 Section 32.502-2 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... finance office clearance. The contracting officer shall obtain the approval of the contract finance...

  7. 48 CFR 32.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Contract finance office clearance. 32.502-2 Section 32.502-2 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... finance office clearance. The contracting officer shall obtain the approval of the contract finance...

  8. 48 CFR 832.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Contract finance office clearance. 832.502-2 Section 832.502-2 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS... finance office clearance. Contracting officers must obtain approval from the DSPE before taking...

  9. 48 CFR 1432.502-2 - Contract finance office clearance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Contract finance office clearance. 1432.502-2 Section 1432.502-2 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... finance office clearance. The CO shall obtain approval of the bureau finance office prior to...

  10. Comparison of serum iohexol clearance and plasma creatinine clearance in clinically normal horses.

    PubMed

    Wilson, Katherine E; Wilcke, Jeff R; Crisman, Mark V; Ward, Daniel L; McKenzie, Harold C; Scarratt, W Kent

    2009-12-01

    Objective-To determine whether a limited sampling time method based on serum iohexol clearance (Cl(iohexol)) would yield estimates of glomerular filtration rate (GFR) in clinically normal horses similar to those for plasma creatinine clearance (Cl(creatinine)). Animals-10 clinically normal adult horses. Procedures-A bolus of iohexol (150 mg/kg) was administered IV, and serum samples were obtained 5, 20, 40, 60, 120, 240, and 360 minutes after injection. Urinary clearance of exogenous creatinine was measured during three 20-minute periods. The GFR determined by use of serum Cl(iohexol) and plasma Cl(creatinine) was compared with limits of agreement plots. Results-Values obtained for plasma Cl(creatinine) ranged from 1.68 to 2.69 mL/min/kg (mean, 2.11 mL/min/kg). Mean serum Cl(iohexol) was 2.38 mL/min/kg (range, 1.95 to 3.33 mL/min/kg). Limits of agreement plots indicated good agreement between the methods. Conclusions and Clinical Relevance-Use of serum Cl(iohexol) yielded estimates of GFR in clinically normal adult horses similar to those for plasma Cl(creatinine). This study was the first step in the evaluation of the use of serum Cl(iohexol) for estimating GFR in adult horses.

  11. A model of clearance rate regulation in mussels

    NASA Astrophysics Data System (ADS)

    Fréchette, Marcel

    2012-10-01

    Clearance rate regulation has been modelled as an instantaneous response to food availability, independent of the internal state of the animals. This view is incompatible with latent effects during ontogeny and phenotypic flexibility in clearance rate. Internal-state regulation of clearance rate is required to account for these patterns. Here I develop a model of internal-state based regulation of clearance rate. External factors such as suspended sediments are included in the model. To assess the relative merits of instantaneous regulation and internal-state regulation, I modelled blue mussel clearance rate and growth using a DEB model. In the usual standard feeding module, feeding is governed by a Holling's Type II response to food concentration. In the internal-state feeding module, gill ciliary activity and thus clearance rate are driven by internal reserve level. Factors such as suspended sediments were not included in the simulations. The two feeding modules were compared on the basis of their ability to capture the impact of latent effects, of environmental heterogeneity in food abundance and of physiological flexibility on clearance rate and individual growth. The Holling feeding module was unable to capture the effect of any of these sources of variability. In contrast, the internal-state feeding module did so without any modification or ad hoc calibration. Latent effects, however, appeared transient. With simple annual variability in temperature and food concentration, the relationship between clearance rate and food availability predicted by the internal-state feeding module was quite similar to that observed in Norwegian fjords. I conclude that in contrast with the usual Holling feeding module, internal-state regulation of clearance rate is consistent with well-documented growth and clearance rate patterns.

  12. Systematic review automation technologies.

    PubMed

    Tsafnat, Guy; Glasziou, Paul; Choong, Miew Keen; Dunn, Adam; Galgani, Filippo; Coiera, Enrico

    2014-07-09

    Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects.We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time.

  13. Systematic review automation technologies

    PubMed Central

    2014-01-01

    Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects. We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time. PMID:25005128

  14. The evolution of down-scale virus filtration equipment for virus clearance studies.

    PubMed

    Wieser, Andreas; Berting, Andreas; Medek, Christian; Poelsler, Gerhard; Kreil, Thomas R

    2015-03-01

    The role of virus filtration in assuring the safety of biopharmaceutical products has gained importance in recent years. This is due to the fundamental advantages of virus filtration, which conceptually can remove all pathogens as long as their size is larger than the biomolecule of commercial interest, while at the same time being neutral to the biological activity of biopharmaceutical compound(s). Major progress has been made in the development of adequate filtration membranes that can remove even smaller viruses, or possibly even all. Establishing down-scaled models for virus clearance studies that are fully equivalent with respect to operating parameters at manufacturing scale is a continuing challenge. This is especially true for virus filtration procedures where virus clearance studies at small-scale determine the operating parameters, which can be used at manufacturing scale. This has limited volume-to-filter-area-ratios, with significant impact on process economics. An advanced small-scale model of virus filtration, which allows the investigation of the full complexity of these processes, is described here. It includes the automated monitoring and control of all process parameters, as well as an electronic data acquisition system, which is fully compliant with current regulatory requirements for electronic records in a pharmaceutical environment. © 2014 Wiley Periodicals, Inc.

  15. Automation synthesis modules review.

    PubMed

    Boschi, S; Lodi, F; Malizia, C; Cicoria, G; Marengo, M

    2013-06-01

    The introduction of (68)Ga labelled tracers has changed the diagnostic approach to neuroendocrine tumours and the availability of a reliable, long-lived (68)Ge/(68)Ga generator has been at the bases of the development of (68)Ga radiopharmacy. The huge increase in clinical demand, the impact of regulatory issues and a careful radioprotection of the operators have boosted for extensive automation of the production process. The development of automated systems for (68)Ga radiochemistry, different engineering and software strategies and post-processing of the eluate were discussed along with impact of automation with regulations. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Managing laboratory automation

    PubMed Central

    Saboe, Thomas J.

    1995-01-01

    This paper discusses the process of managing automated systems through their life cycles within the quality-control (QC) laboratory environment. The focus is on the process of directing and managing the evolving automation of a laboratory; system examples are given. The author shows how both task and data systems have evolved, and how they interrelate. A BIG picture, or continuum view, is presented and some of the reasons for success or failure of the various examples cited are explored. Finally, some comments on future automation need are discussed. PMID:18925018

  17. 76 FR 36167 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-21

    ... Federal Aviation Administration Agency Information Collection Activities: Requests for Comments; Clearance... the request for OMB's clearance of this information collection. Issued in Washington, DC on June 15, 2011. Carla Scott, FAA Information Collection Clearance Officer, IT Enterprises Business...

  18. Effects of drugs on mucus clearance.

    PubMed

    Houtmeyers, E; Gosselink, R; Gayan-Ramirez, G; Decramer, M

    1999-08-01

    Mucociliary clearance (MCC), the process in which airway mucus together with substances trapped within are moved out of the lungs, is an important defence mechanism of the human body. Drugs may alter this process, such that it is necessary to know the effect of the drugs on MCC. Indeed, agents stimulating MCC may be used therapeutically in respiratory medicine, especially in patients suspected of having an impairment of their mucociliary transport system. In contrast, caution should be taken with drugs depressing MCC as an undesired side-effect, independently of their therapeutic indication. Since cough clearance (CC) serves as a back-up system when MCC fails, the influence of drugs must be examined not only on MCC but also on CC. Ultimately, the clinical repercussions of alterations in mucus transport induced by drug administration must be studied. Tertiary ammonium compounds (anticholinergics), aspirin, anaesthetic agents and benzodiazepines have been shown to be capable of depressing the mucociliary transport system. Cholinergics, methylxanthines, sodium cromoglycate, hypertonic saline, saline as well as water aerosol have been shown to increase MCC. Adrenergic antagonists, guaifenesin, S-carboxymethylcysteine, sodium 2-mercapto-ethane sulphonate and frusemide have been reported not to alter the mucociliary transport significantly. Amiloride, uridine 5'-triphosphate (UTP), quaternary ammonium compounds (anticholinergics), adrenergic agonists, corticosteroids, recombinant human deoxyribonuclease (rhDNase), N-acetylcysteine, bromhexine and ambroxol have been reported either not to change or to augment MCC. Indirect data suggest that surfactant as well as antibiotics may improve the mucociliary transport system. As for the influence of drugs on CC, amiloride and rhDNase have been demonstrated to increase the effectiveness of cough. A trend towards an improved CC was noted after treatment with adrenergic agonists. The anticholinergic agent ipratropium bromide, which

  19. Integrated Turbine Tip Clearance and Gas Turbine Engine Simulation

    NASA Technical Reports Server (NTRS)

    Chapman, Jeffryes W,; Kratz, Jonathan; Guo, Ten-Huei; Litt, Jonathan

    2016-01-01

    Gas turbine compressor and turbine blade tip clearance (i.e., the radial distance between the blade tip of an axial compressor or turbine and the containment structure) is a major contributing factor to gas path sealing, and can significantly affect engine efficiency and operational temperature. This paper details the creation of a generic but realistic high pressure turbine tip clearance model that may be used to facilitate active tip clearance control system research. This model uses a first principles approach to approximate thermal and mechanical deformations of the turbine system, taking into account the rotor, shroud, and blade tip components. Validation of the tip clearance model shows that the results are realistic and reflect values found in literature. In addition, this model has been integrated with a gas turbine engine simulation, creating a platform to explore engine performance as tip clearance is adjusted. Results from the integrated model explore the effects of tip clearance on engine operation and highlight advantages of tip clearance management.

  20. Foot clearance during stair descent: effects of age and illumination.

    PubMed

    Hamel, Kathryn A; Okita, Noriaki; Higginson, Jill S; Cavanagh, Peter R

    2005-02-01

    It is likely that many stair accidents result from a trip during stair negotiation, yet few studies have examined the exact nature of balance loss during falls on stairs. The purpose of this study was to investigate potential age-related differences in the minimum clearance of the foot during stair descent, and to explore whether the minimum foot clearance was affected by the available ambient lighting. Twelve young adults (24+/-3.3 years) and 10 older adults (73.7+/-1.9 years) participated in the study. The older adults had significantly greater within subject coefficients of variation compared to the young adults, and had a significantly larger number of minimum foot clearances which fell below 5 mm. While the young subjects increased their minimum clearance by 3.6 mm on average in response to a decrease in ambient lighting, the older adults maintained the same clearance over all stairs except one. These results suggest that the variability of minimum foot clearance, and lack of precautionary increases in foot clearance under reduced lighting may contribute to falls on stairs by the elderly.

  1. Analysis of viral clearance unit operations for monoclonal antibodies.

    PubMed

    Miesegaes, George; Lute, Scott; Brorson, Kurt

    2010-06-01

    Demonstration of viral clearance is a critical step in assuring the safety of biotechnology products. We generated a viral clearance database that contains product information, unit operation process parameters, and viral clearance data from monoclonal antibody and antibody-related regulatory submissions to FDA. Here we present a broad overview of the database and resulting analyses. We report that the diversity of model viruses tested expands as products transition to late-phase. We also present averages and ranges of viral clearance results by Protein A and ion exchange chromatography steps, low pH chemical inactivation, and virus filtration, focusing on retro- and parvoviruses. For most unit operations, an average log reduction value (LRV, a measure of clearance power) for retrovirus of >4 log(10) were measured. Cases where clearance data fell outside of the anticipated range (i.e., outliers) were rationally explained. Lastly, a historical analysis did not find evidence of any improvement trend in viral clearance over time. The data collectively suggest that many unit operations in general can reliably clear viruses.

  2. Inter-individual variation in midazolam clearance in children

    PubMed Central

    Altamimi, Mohammed I; Sammons, Helen; Choonara, Imti

    2015-01-01

    Objectives To determine the extent of inter-individual variation in clearance of midazolam in children and establish which factors are responsible for this variation. Methods A systematic literature review was performed to identify papers describing the clearance of midazolam in children. The following databases were searched: Medline, Embase, International Pharmaceutical Abstracts, CINAHL and Cochrane Library. From the papers, the range in plasma clearance and the coefficient of variation (CV) in plasma clearance were determined. Results 25 articles were identified. Only 13 studies gave the full range of clearance values for individual patients. The CV was greater in critically ill patients (18%–170%) than non-critically ill patients (13%–54%). Inter-individual variation was a major problem in all age groups of critically ill patients. The CV was 72%–106% in preterm neonates, 18%–73% in term neonates, 31%–130% in infants, 21%–170% in children and 47%–150% in adolescents. The mean clearance was higher in children (1.1–16.7 mL/min/kg) than in neonates (0.78–2.5 mL/min/kg). Conclusions Large inter-individual variation was seen in midazolam clearance values in critically ill neonates, infants, children and adolescents. PMID:25281734

  3. Integrated Turbine Tip Clearance and Gas Turbine Engine Simulation

    NASA Technical Reports Server (NTRS)

    Chapman, Jeffryes W.; Kratz, Jonathan; Guo, Ten-Huei; Litt, Jonathan

    2016-01-01

    Gas turbine compressor and turbine blade tip clearance (i.e., the radial distance between the blade tip of an axial compressor or turbine and the containment structure) is a major contributing factor to gas path sealing, and can significantly affect engine efficiency and operational temperature. This paper details the creation of a generic but realistic high pressure turbine tip clearance model that may be used to facilitate active tip clearance control system research. This model uses a first principles approach to approximate thermal and mechanical deformations of the turbine system, taking into account the rotor, shroud, and blade tip components. Validation of the tip clearance model shows that the results are realistic and reflect values found in literature. In addition, this model has been integrated with a gas turbine engine simulation, creating a platform to explore engine performance as tip clearance is adjusted. Results from the integrated model explore the effects of tip clearance on engine operation and highlight advantages of tip clearance management.

  4. A novel relay method for determining low-clearance values.

    PubMed

    Di, Li; Trapa, Patrick; Obach, R Scott; Atkinson, Karen; Bi, Yi-An; Wolford, Angela C; Tan, Beijing; McDonald, Thomas S; Lai, Yurong; Tremaine, Larry M

    2012-09-01

    A novel relay method has been developed using cryopreserved human hepatocytes to measure intrinsic clearance of low-clearance compounds. The relay method involved transferring the supernatant from hepatocyte incubations to freshly thawed hepatocytes at the end of the 4-h incubation to prolong the exposure time to active enzymes in hepatocytes. An accumulative incubation time of 20 h or longer in hepatoctyes can be achieved using the method. The relay method was validated using seven commercial drugs (diazepam, disopyramide, theophylline, timolol, tolbutamide, S-warfarin, and zolmitriptan) that were metabolized by various cytochrome P450s with low human in vivo intrinsic clearance at approximately 2 to 15 ml · min⁻¹ · kg⁻¹. The results showed that the relay method produced excellent predictions of human in vivo clearance. The difference between in vitro and in vivo intrinsic clearance was within 2-fold for most compounds, which is similar to the standard prediction accuracy for moderate to high clearance compounds using hepatocytes. The relay method is a straightforward, relatively low cost, and easy-to-use new tool to address the challenges of low clearance in drug discovery and development.

  5. Xenon International Automated Control

    SciTech Connect

    2016-08-05

    The Xenon International Automated Control software monitors, displays status, and allows for manual operator control as well as fully automatic control of multiple commercial and PNNL designed hardware components to generate and transmit atmospheric radioxenon concentration measurements every six hours.

  6. Automating the Media Center.

    ERIC Educational Resources Information Center

    Holloway, Mary A.

    1988-01-01

    Discusses the need to develop more efficient information retrieval skills by the use of new technology. Lists four stages used in automating the media center. Describes North Carolina's pilot programs. Proposes benefits and looks at the media center's future. (MVL)

  7. Planning for Office Automation.

    ERIC Educational Resources Information Center

    Mick, Colin K.

    1983-01-01

    Outlines a practical approach to planning for office automation termed the "Focused Process Approach" (the "what" phase, "how" phase, "doing" phase) which is a synthesis of the problem-solving and participatory planning approaches. Thirteen references are provided. (EJS)

  8. Automated decision stations

    NASA Technical Reports Server (NTRS)

    Tischendorf, Mark

    1990-01-01

    This paper discusses the combination of software robots and expert systems to automate everyday business tasks. Tasks which require people to repetitively interact with multiple systems screens as well as multiple systems.

  9. Automated Status Notification System

    NASA Technical Reports Server (NTRS)

    2005-01-01

    NASA Lewis Research Center's Automated Status Notification System (ASNS) was born out of need. To prevent "hacker attacks," Lewis' telephone system needed to monitor communications activities 24 hr a day, 7 days a week. With decreasing staff resources, this continuous monitoring had to be automated. By utilizing existing communications hardware, a UNIX workstation, and NAWK (a pattern scanning and processing language), we implemented a continuous monitoring system.

  10. Automated Microfluidics for Genomics

    DTIC Science & Technology

    2001-10-25

    Abstract--The Genomation Laboratory at the University of Washington is developing an automated fluid handling system called " Acapella " to prepare...Photonic Systems, Inc. (Redmond, WA), an automated submicroliter fluid sample preparation system called ACAPELLA is being developed. Reactions such...technology include minimal residual disease quantification and sample preparation for DNA. Preliminary work on the ACAPELLA is presented in [4][5]. This

  11. Automated Pilot Advisory System

    NASA Technical Reports Server (NTRS)

    Parks, J. L., Jr.; Haidt, J. G.

    1981-01-01

    An Automated Pilot Advisory System (APAS) was developed and operationally tested to demonstrate the concept that low cost automated systems can provide air traffic and aviation weather advisory information at high density uncontrolled airports. The system was designed to enhance the see and be seen rule of flight, and pilots who used the system preferred it over the self announcement system presently used at uncontrolled airports.

  12. Automating Index Preparation

    DTIC Science & Technology

    1987-03-23

    Automating Index Preparation* Pehong Chent Michael A. Harrison Computer Science Division University of CaliforniaI Berkeley, CA 94720 March 23, 1987...Abstract Index preparation is a tedious and time-consuming task. In this paper we indicate * how the indexing process can be automated in a way which...identified and analyzed. Specifically, we describe a framework for placing index commands in the document and a general purpose index processor which

  13. Automated Lattice Perturbation Theory

    SciTech Connect

    Monahan, Christopher

    2014-11-01

    I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

  14. Metrology automation reliability

    NASA Astrophysics Data System (ADS)

    Chain, Elizabeth E.

    1996-09-01

    At Motorola's MOS-12 facility automated measurements on 200- mm diameter wafers proceed in a hands-off 'load-and-go' mode requiring only wafer loading, measurement recipe loading, and a 'run' command for processing. Upon completion of all sample measurements, the data is uploaded to the factory's data collection software system via a SECS II interface, eliminating the requirement of manual data entry. The scope of in-line measurement automation has been extended to the entire metrology scheme from job file generation to measurement and data collection. Data analysis and comparison to part specification limits is also carried out automatically. Successful integration of automated metrology into the factory measurement system requires that automated functions, such as autofocus and pattern recognition algorithms, display a high degree of reliability. In the 24- hour factory reliability data can be collected automatically on every part measured. This reliability data is then uploaded to the factory data collection software system at the same time as the measurement data. Analysis of the metrology reliability data permits improvements to be made as needed, and provides an accurate accounting of automation reliability. This reliability data has so far been collected for the CD-SEM (critical dimension scanning electron microscope) metrology tool, and examples are presented. This analysis method can be applied to such automated in-line measurements as CD, overlay, particle and film thickness measurements.

  15. Automated Groundwater Screening

    SciTech Connect

    Taylor, Glenn A.; Collard, Leonard, B.

    2005-10-31

    The Automated Intruder Analysis has been extended to include an Automated Ground Water Screening option. This option screens 825 radionuclides while rigorously applying the National Council on Radiation Protection (NCRP) methodology. An extension to that methodology is presented to give a more realistic screening factor for those radionuclides which have significant daughters. The extension has the promise of reducing the number of radionuclides which must be tracked by the customer. By combining the Automated Intruder Analysis with the Automated Groundwater Screening a consistent set of assumptions and databases is used. A method is proposed to eliminate trigger values by performing rigorous calculation of the screening factor thereby reducing the number of radionuclides sent to further analysis. Using the same problem definitions as in previous groundwater screenings, the automated groundwater screening found one additional nuclide, Ge-68, which failed the screening. It also found that 18 of the 57 radionuclides contained in NCRP Table 3.1 failed the screening. This report describes the automated groundwater screening computer application.

  16. Laser-optical blade tip clearance measurement system

    NASA Technical Reports Server (NTRS)

    Barranger, J. P.; Ford, M. J.

    1979-01-01

    A laser-optical measurement system was developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.

  17. Time-of-Flight Tip-Clearance Measurements

    NASA Technical Reports Server (NTRS)

    Dhadwal, H. S.; Kurkov, A. P.; Janetzke, D. C.

    1999-01-01

    In this paper a time-of-flight probe system incorporating the two integrated fiber optic probes which are tilted equally relative to the probe holder centerline, is applied for the first time to measure the tip clearance of an advanced fan prototype. Tip clearance is largely independent of the signal amplitude and it relies on timing measurement. This work exposes optical effects associated with the fan blade stagger angle that were absent during the original spin-rig experiment on the zero stagger rotor. Individual blade tip clearances were measured with accuracy of +/- 127-mm (+/- 0.005-in). Probe features are discussed and improvements to the design are suggested.

  18. Toward a Fast-Response Active Turbine Tip Clearance Control

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.; Kypuros, Javier A.

    2003-01-01

    This paper describes active tip clearance control research being conducted by NASA to improve turbine engine systems. The target application for this effort is commercial aircraft engines. However, technologies developed for clearance control can benefit a broad spectrum of current and future turbomachinery. The first portion of the paper addresses the research from a programmatic viewpoint. Recent studies that provide motivation for the work, identification of key technologies, and NASA's plan for addressing deficiencies in the technologies are discussed. The later portion of the paper drills down into one of the key technologies by presenting equations and results for a preliminary dynamic model of the tip clearance phenomena.

  19. Aerosol Medications for Treatment of Mucus Clearance Disorders.

    PubMed

    Rubin, Bruce K

    2015-06-01

    Airway mucus hypersecretion and secretion retention can result from inflammation, irritation, stimulation, or mucus-producing tumors. Secretion clearance can be furthered hampered by ciliary dysfunction and by weakness or restrictive lung disease, leading to an ineffective cough. There are a number of different mucoactive medications that have been used to reduce hypersecretion, make secretions easier to transport, or increase the efficiency of cough or mucus clearance. In this paper, I review the pathophysiology of secretory hyper-responsiveness and mucus hypersecretion and discuss the different aerosol medications that can be used to augment secretion clearance. Copyright © 2015 by Daedalus Enterprises.

  20. Ion exchange chromatography of proteins and clearance of aggregates.

    PubMed

    Yigzaw, Y; Hinckley, P; Hewig, A; Vedantham, G

    2009-06-01

    Clearance of product related aggregates in therapeutic proteins is a major focus of purification process development. A typical purification process will have one or two chromatographic steps that remove these product related aggregates to an acceptable level. Both cation exchange and anion exchange chromatography can provide robust clearance of aggregates. The primary factors that are critical for aggregate clearance are: resin chemistry, binding and elution condition, peak collection and column load factor. This review covers how these factors can be optimized to increase the effectiveness of ion exchange chromatography in removing aggregates.

  1. Modeling of Inhalation Administration of Vapors with Capacity Limited Clearance.

    DTIC Science & Technology

    1983-08-31

    7 D-i 38 847 MODELING OF INHALATION ADMINISTRATION OF VAPORS WITH 1/277I CAPACITY LIMITED CLEARANCE (I) MI M UNIV FLA DEPT OFANESTHESIOLOGY V THOMAS...WITH CAPACITY LIMITED CLEARANCE r-.4 AFOSR Grant No. 4#F03A I/ 1l.;Li C for the period June 30, 1981 to August 31, 1983 Vera Thomas, Ph.D. Professor...PERIOD COVEREDFinal : .0,,,0 MODELING OF INHALATION ADMINISTRATION OF VAPORS Fia". -" WITH CAPACITY LIMITED CLEARANCE 6/30/81 thru 6/31/83 6. PERFORMING

  2. Simple sampling strategy for measuring inulin renal clearance.

    PubMed

    Horio, Masaru; Imai, Enyu; Yasuda, Yoshinari; Hishida, Akira; Matsuo, Seiichi

    2009-02-01

    In the standard method of inulin clearance (Cin), three sets of serum and urine samples are collected during a 2-hour clearance period. For a practical use of this method, sampling should be the minimal number allowable while still providing enough accuracy. The aim of this study was to evaluate the validity of inulin renal clearance with assumed single urine collection with a period such as 30, 60 or 90 minutes. Inulin clearance data collected by the standard method from 737 individuals were used. Changes of serum inulin concentrations between 45 and 105 minutes after the start of the infusion were analyzed. We used first urine collection to calculate the inulin clearance with single urine collection (Cin-30 min). We assumed single urine collection for 60 or 90 minutes by combining the urine data of the consecutive 30-minute periods. Inulin clearances (Cin-60 min, Cin-90 min) were calculated from the assumed single urine collections, respectively. Serum inulin concentration did not reach equilibrium during the clearance period. It increased in subjects with low glomerular filtration rate (GFR) and decreased in subjects with normal GFR. The amount of the change was small and -0.5 +/- 12.6% in subjects with GFR over 30 ml/min per 1.73 m(2). Cin-30 min, Cin-60 min and Cin-90 min showed high correlation coefficients against Cin-ST (0.962, 0.988 and 0.998, respectively). Systemic biases in these clearances were negligible (under 1 ml/min per 1.73 m(2)). Root mean square error (RMSE) were 10.4, 5.3 and 2.3 ml/min per 1.73 m(2) for Cin-30 min, Cin-60 min and Cin-90 min, respectively. These data indicated that accuracy of inulin clearance depends on the duration of the urine collection period. Inulin clearance with a single urine collection is a convenient method. We showed that single urine collection for 30 minutes or a longer period has reasonable accuracy in calculation of inulin clearance. We propose a method of inulin clearance with single urine collection for 60

  3. Elements of EAF automation processes

    NASA Astrophysics Data System (ADS)

    Ioana, A.; Constantin, N.; Dragna, E. C.

    2017-01-01

    Our article presents elements of Electric Arc Furnace (EAF) automation. So, we present and analyze detailed two automation schemes: the scheme of electrical EAF automation system; the scheme of thermic EAF automation system. The application results of these scheme of automation consists in: the sensitive reduction of specific consummation of electrical energy of Electric Arc Furnace, increasing the productivity of Electric Arc Furnace, increase the quality of the developed steel, increasing the durability of the building elements of Electric Arc Furnace.

  4. Automated assembly of holder chips to AFM probes

    NASA Astrophysics Data System (ADS)

    Reinhart, Gunther; Jacob, Dirk; Fouchier, Marc

    2001-10-01

    At the Belgian institute IMEC techniques for the production of electrically conductive atomic force microscope (AFM) probes are developed. To facilitate handling of the fragile probes, holder chips are required. The assembly of such holder chips, which can be split up into the application of solder paste, the positioning of the holder chip and the soldering of the chip, is a crucial manufacturing step, that, until now, was performed manually for economic reasons. With the help of a modular micro assembly tool, developed by the Institute for Machine Tools and Industrial Management (iwb) of the Technische Universitaet Muenchen, an economical automated assembly of the holder chips was developed. Thanks to our integrated sensor technology, even the automated assembly onto the extremely fragile membranes of moulded AFM probes was possible. In particular, the dispensing process of the solder paste onto the membranes was improved by the integration of a non-contact sensor for the needle clearance.

  5. A Multiple Agent Model of Human Performance in Automated Air Traffic Control and Flight Management Operations

    NASA Technical Reports Server (NTRS)

    Corker, Kevin; Pisanich, Gregory; Condon, Gregory W. (Technical Monitor)

    1995-01-01

    A predictive model of human operator performance (flight crew and air traffic control (ATC)) has been developed and applied in order to evaluate the impact of automation developments in flight management and air traffic control. The model is used to predict the performance of a two person flight crew and the ATC operators generating and responding to clearances aided by the Center TRACON Automation System (CTAS). The purpose of the modeling is to support evaluation and design of automated aids for flight management and airspace management and to predict required changes in procedure both air and ground in response to advancing automation in both domains. Additional information is contained in the original extended abstract.

  6. Metabolic clearance rate and urinary clearance of purified beta-core

    SciTech Connect

    Wehmann, R.E.; Blithe, D.L.; Flack, M.R.; Nisula, B.C. )

    1989-09-01

    We injected a highly purified preparation of the beta-core molecule, a fragment of hCG beta excreted in pregnancy urine, into five men and three women to determine its kinetic parameters, MCR, and urinary clearance. The beta-core molecule was distributed in an initial volume (1950 +/- 156 (mean +/- SEM) mL/m2 body surface area) approximately equal to the estimated plasma volume. Its disappearance was multiexponential on a semilogarithmic plot, with a rapid phase t1/2 of 3.5 +/- 0.7 min and a slow phase t1/2 of 22.4 +/- 4.2 min. The transit time (the mean time spent by a molecule of beta-core in transit) was 20.6 +/- 2.1 min. The MCR was 192.0 +/- 8.0 mL/min.m2 body surface area. About 5% of the injected dose of beta-core was excreted into the urine in the first 30 min after injection, and low levels of excretion persisted for up to 7 days. The urinary clearance rate of beta-core was 13.7 +/- 1.4 mL/min.m2, accounting for about 8% of the elimination of beta-core from the plasma. The beta-core immunoreactivity in serum and urine was characterized by gel filtration and three independent RIA systems to show that its properties were indistinguishable from those of the injected beta-core. Serum levels of beta-core in pregnant women were less than 0.2 ng/mL, while the amounts excreted in their urine were as much as 5 mg/day. Based on these clearance parameters of beta-core in normal subjects, less than 0.2% of the beta-core excreted in pregnancy urine is derived by urinary clearance of plasma beta-core. Therefore, more than 99% of the beta-core excreted in pregnancy urine is derived from beta-core in a compartment separate from plasma. In particular, these data indicate that there is relatively little placental secretion of beta-core into plasma and that placental secretion does not account for the vast majority of beta-core in pregnancy urine.

  7. Airway Clearance Devices for Cystic Fibrosis

    PubMed Central

    2009-01-01

    Executive Summary Objective The purpose of this evidence-based analysis is to examine the safety and efficacy of airway clearance devices (ACDs) for cystic fibrosis and attempt to differentiate between devices, where possible, on grounds of clinical efficacy, quality of life, safety and/or patient preference. Background Cystic fibrosis (CF) is a common, inherited, life-limiting disease that affects multiple systems of the human body. Respiratory dysfunction is the primary complication and leading cause of death due to CF. CF causes abnormal mucus secretion in the airways, leading to airway obstruction and mucus plugging, which in turn can lead to bacterial infection and further mucous production. Over time, this almost cyclical process contributes to severe airway damage and loss of respiratory function. Removal of airway secretions, termed airway clearance, is thus an integral component of the management of CF. A variety of methods are available for airway clearance, some requiring mechanical devices, others physical manipulation of the body (e.g. physiotherapy). Conventional chest physiotherapy (CCPT), through the assistance of a caregiver, is the current standard of care for achieving airway clearance, particularly in young patients up to the ages of six or seven. CF patients are, however, living much longer now than in decades past. The median age of survival in Canada has risen to 37.0 years for the period of 1998-2002 (5-year window), up from 22.8 years for the 5-year window ending in 1977. The prevalence has also risen accordingly, last recorded as 3,453 in Canada in 2002, up from 1,630 in 1977. With individuals living longer, there is a greater need for independent methods of airway clearance. Airway Clearance Devices There are at least three classes of airway clearance devices: positive expiratory pressure devices (PEP), airway oscillating devices (AOD; either handheld or stationary) and high frequency chest compression (HFCC)/mechanical percussion (MP

  8. Early Agriculture: Land Clearance and Climate Effects

    NASA Astrophysics Data System (ADS)

    Ruddiman, W. F.

    2013-12-01

    inception. Well-dated high-resolution CO2 (and CH4) records from ice cores show gas decreases that correlate closely with major pandemics and civil strife, but show little if any link to temperature or precipitation trends. One significant (and intriguing) discrepancy with the original hypothesis remains. Most of the CO2 rise occurred between 6000 and 2500 years ago, well before the major increase in global population that has been hindcast from geometric models that assume a constant fractional rate of population increase. Some of this discrepancy has been reconciled by historical evidence showing much higher per-capita clearance millennia ago than later in pre-industrial time, resulting in disproportionately large early clearance and CO2 emissions. In addition, DNA studies and archeological syntheses now indicate that early farming populations initially grew at very fast rates favored by environments rich in basic resources (especially fertile soils), but then slowed in later millennia because of growing resource limitations and the effects of pandemics and civil strife in checking population growth. This emerging view of fast-rising early population trends has the potential to account for the early timing of the CO2 increase.

  9. Intradialytic clearance of opioids: methadone versus hydromorphone.

    PubMed

    Perlman, Ryan; Giladi, Hili; Brecht, Krista; Ware, Mark A; Hebert, Terence E; Joseph, Lawrence; Shir, Yoram

    2013-12-01

    Opioids are commonly prescribed to patients with chronic pain associated with end-stage renal disease requiring hemodialysis. The stability of opioid analgesia during dialysis may vary among different opioids. No studies to date have corroborated this clinical observation by directly comparing plasma concentrations of different opioids during dialysis. We compared changes in peridialysis plasma concentrations of 2 pharmacokinetically distinct opioids, methadone and hydromorphone (HM). Fourteen dialysis patients with chronic pain received either methadone or HM for at least 2 weeks before beginning the study. Blood samples were obtained immediately before, during, and after hemodialysis in 2 separate dialysis sessions, 1 week apart, and were analyzed for opioid concentrations. Methadone plasma concentrations were more stable during hemodialysis compared to HM: the mean percent change of methadone plasma levels was 14.9% ± 8.2% (± SD) compared with 55.1% ± 8.1% in the HM treatment group, a difference of 40.2% (95% confidence interval 17.14 to 63.14). The mean plasma clearance of methadone was 19.9 ± 8.5 mL/min (± SD) compared with 105.7 ± 8.3 mL/min for HM, a difference of 85.7 mL/min (95% confidence interval 61.9 to 109.1). There were no differences between the 2 opioid groups in pain scores, side effect profile, and quality of life. Methadone therapy was not associated with an increased rate of adverse events. If confirmed by larger clinical studies, methadone could be considered as one of the opioids of choice in dialysis patients.

  10. Intraarticular volume and clearance in human synovial effusions

    SciTech Connect

    Wallis, W.J.; Simkin, P.A.; Nelp, W.B.; Foster, D.M.

    1985-04-01

    Intraarticular volumes were measured by radiolabeled albumin (RISA) distribution in chronic knee effusions from 11 rheumatoid arthritis patients and 9 osteoarthritis patients. Volumes of synovial fluid obtained at joint aspiration were substantially less than those found by RISA dilution. Up to 24 hours was needed for full distribution of RISA throughout the intraarticular compartment. Measured 123I and RISA radioactivity over the knee described monoexponential rate constants, lambda (minute-1). The clearance of 123I and RISA from synovial effusions was derived by the formulation volume (ml) X lambda (minute-1) = clearance (ml/minute). RISA clearance in rheumatoid effusions was significantly greater than that found in osteoarthritis effusions. Intraarticular volume and isotope clearance were easily quantified and provide measures for further evaluating the microvascular physiology of synovial effusions.

  11. IFNL4 affects clearance of hepatitis C virus

    Cancer.gov

    Scientists have discovered a new human interferon gene, Interferon Lambda 4 (IFNL4), that affects clearance of the hepatitis C virus. They also identified an inherited genetic variant within IFNL4 that predicts how people respond to treatment for hepatit

  12. Laser-optical blade tip clearance measurement system

    NASA Technical Reports Server (NTRS)

    Barranger, J. P.; Ford, M. J.

    1980-01-01

    The need for blade tip clearance instrumentation has been intensified recently by advances in technology of gas turbine engines. A new laser-optical measurement system has been developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.

  13. 77 FR 44641 - Critical Infrastructure Private Sector Clearance Program Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ...: Once. Affected Public: Designated private sector employees of critical infrastructure entities or... SECURITY Critical Infrastructure Private Sector Clearance Program Request AGENCY: National Protection and... Programs Directorate (NPPD), Office of Infrastructure Protection (IP) will submit the following Information...

  14. Clearance detector and method for motion and distance

    DOEpatents

    Xavier, Patrick G [Albuquerque, NM

    2011-08-09

    A method for correct and efficient detection of clearances between three-dimensional bodies in computer-based simulations, where one or both of the volumes is subject to translation and/or rotations. The method conservatively determines of the size of such clearances and whether there is a collision between the bodies. Given two bodies, each of which is undergoing separate motions, the method utilizes bounding-volume hierarchy representations for the two bodies and, mappings and inverse mappings for the motions of the two bodies. The method uses the representations, mappings and direction vectors to determine the directionally furthest locations of points on the convex hulls of the volumes virtually swept by the bodies and hence the clearance between the bodies, without having to calculate the convex hulls of the bodies. The method includes clearance detection for bodies comprising convex geometrical primitives and more specific techniques for bodies comprising convex polyhedra.

  15. Further Characterization of an Active Clearance Control Concept

    NASA Technical Reports Server (NTRS)

    Taylor, Shawn C.; Steinetz, Bruce M.; Oswald, Jay J.

    2007-01-01

    A new test chamber and precision hydraulic actuation system were incorporated into an active clearance control (ACC) test rig at NASA Glenn Research Center. Using the improved system, a fast-acting, mechanically-actuated, ACC concept was evaluated at engine simulated temperatures and pressure differentials up to 1140 F and 120 psig, on the basis of secondary seal leakage and kinematic controllability. During testing, the ACC concept tracked a simulated flight clearance transient profile at 1140 F, 120 psig, with a maximum error of only 0.0012 in. Comparison of average dynamic leakage of the system with average static leakage did not show significant differences between the two operating conditions. Calculated effective clearance values for the rig were approximately 0.0002 in. at 120 psig, well below the industry specified effective clearance threshold of 0.001 in.

  16. Mucociliary clearance mechanism in smoking and nonsmoking normal subjects

    SciTech Connect

    Isawa, T.; Teshima, T.; Hirano, T.; Ebina, A.; Konno, K.

    1984-03-01

    Mucociliary clearance mechanisms were evaluated in 17 normal subjects visually and qualitatively by radioaerosol inhalation cinescintigraphy of the lung, and quantitatively by calculating the following indices: (a) overall or regional lung retention ratio; (b) airway deposition ratio; (c) airway retention ratio; (d) airway clearance efficiency; and (e) alveolar deposition ratio. The inhaled aerosol deposited homogeneously throughout the lungs, and mucus transport was always cephalad in direction and constant in velocity, although a temporary stasis of mucus was seen in smokers. Overall lung retention ratio was significantly smaller and airway deposition ratio was significantly larger in the smokers than in nonsmokers, but there was no difference between the groups in airway retention ratio or airway clearance efficiency. There was an inverse relationship between alveolar deposition ratio and cigarette consumption. Mucociliary clearance mechanisms were well maintained in the normal subjects, but in the smokers inhaled aerosol tended to deposit more proximally.

  17. 33 CFR 151.1508 - Revocation of clearance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) POLLUTION VESSELS CARRYING OIL, NOXIOUS LIQUID SUBSTANCES, GARBAGE, MUNICIPAL OR COMMERCIAL WASTE, AND... River § 151.1508 Revocation of clearance. A COTP may request the District Director of Customs to...

  18. 33 CFR 151.1508 - Revocation of clearance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) POLLUTION VESSELS CARRYING OIL, NOXIOUS LIQUID SUBSTANCES, GARBAGE, MUNICIPAL OR COMMERCIAL WASTE, AND... River § 151.1508 Revocation of clearance. A COTP may request the District Director of Customs to...

  19. 33 CFR 151.1508 - Revocation of clearance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) POLLUTION VESSELS CARRYING OIL, NOXIOUS LIQUID SUBSTANCES, GARBAGE, MUNICIPAL OR COMMERCIAL WASTE, AND... River § 151.1508 Revocation of clearance. A COTP may request the District Director of Customs to...

  20. 33 CFR 151.1508 - Revocation of clearance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) POLLUTION VESSELS CARRYING OIL, NOXIOUS LIQUID SUBSTANCES, GARBAGE, MUNICIPAL OR COMMERCIAL WASTE, AND... River § 151.1508 Revocation of clearance. A COTP may request the District Director of Customs to...

  1. 33 CFR 151.1508 - Revocation of clearance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) POLLUTION VESSELS CARRYING OIL, NOXIOUS LIQUID SUBSTANCES, GARBAGE, MUNICIPAL OR COMMERCIAL WASTE, AND... River § 151.1508 Revocation of clearance. A COTP may request the District Director of Customs to...

  2. 32 CFR 644.517 - Clearance of Army lands.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Clearance, the following information will be furnished to the DE upon completion of the neutralization: (a) Records of the neutralization work performed, including statement of methods employed. (b) List...

  3. 54. CLEARANCE OF SITE PRIOR TO CONSTRUCTION OF BREAKER BUILDING, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. CLEARANCE OF SITE PRIOR TO CONSTRUCTION OF BREAKER BUILDING, AND CONSTRUCTION OF EMBANKMENT FOR RAILROAD SPUR. c.1898 (AKZO No. A-3) - Avery Island Salt Works, Akzo Salt Incorporated, Avery Island, Iberia Parish, LA

  4. Antibody-Mediated Clearance of Alphavirus Infection from Neurons

    NASA Astrophysics Data System (ADS)

    Levine, Beth; Hardwick, J. Marie; Trapp, Bruce D.; Crawford, Thomas O.; Bollinger, Robert C.; Griffin, Diane E.

    1991-11-01

    Humoral immunity is important for protection against viral infection and neutralization of extracellular virus, but clearance of virus from infected tissues is thought to be mediated solely by cellular immunity. However, in a SCID mouse model of persistent alphavirus encephalomyelitis, adoptive transfer of hyperimmune serum resulted in clearance of infectious virus and viral RNA from the nervous system, whereas adoptive transfer of sensitized T lymphocytes had no effect on viral replication. Three monoclonal antibodies to two different epitopes on the E2 envelope glycoprotein mediated viral clearance. Treatment of alphavirus-infected primary cultured rat neurons with these monoclonal antibodies to E2 resulted in decreased viral protein synthesis, followed by gradual termination of mature infectious virion production. Thus, antibody can mediate clearance of alphavirus infection from neurons by restricting viral gene expression.

  5. High Temperature Evaluation of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Taylor, Shawn C.; Steinetz, Bruce M.; Oswald, Jay J.

    2006-01-01

    A mechanically actuated blade tip clearance control concept was evaluated in a nonrotating test rig to quantify secondary seal leakage at elevated temperatures. These tests were conducted to further investigate the feasibility of actively controlling the clearance between the rotor blade tips and the surrounding shroud seal in the high pressure turbine (HPT) section of a turbine engine. The test environment simulates the state of the back side of the HPT shroud seal with pressure differentials as high as 120 psig and temperatures up to 1000 F. As expected, static secondary seal leakage decreased with increasing temperature. At 1000 F, the test rig's calculated effective clearance (at 120 psig test pressure) was 0.0003 in., well within the industry specified effective clearance goal.

  6. Control of Small Robotic Vehicles In Unexploded Ordnance Clearance

    DTIC Science & Technology

    1997-04-01

    Proceedings of the IEEE ICRA97, Albuquerque, New Mexico, April 20-25, 1997 ISBN 0-7803-3904-5 Control of Small Robotic Vehicles In Unexploded...multiple small robotic vehicles for performing mine field clearance, and the related problem of clearing unexploded ordnance from areas of interest...charge that could be detonated upon command. Results given in this paper includes the performance of clearance operations with behavior based robots

  7. Measuring Motor-Shaft Clearance And Wobble During Operation

    NASA Technical Reports Server (NTRS)

    Chern, Engmin James

    1996-01-01

    Noncontact proximity sensor, preferably eddy-current liftoff probe, provides realtime measurement of distance and small variations of distance between two mechanical components designed to be maintained at precise, fixed distance. In particular, system intended for use in measuring lateral clearance and variations in lateral clearance (wobble) of motor shaft relative to motor housing while shaft turning. Provides early indication of wear in motor bearings. Rate of rotation also measured.

  8. Enhanced Bomb Effects for Obstacle Clearance (Analysis Task)

    DTIC Science & Technology

    1998-01-01

    Enhanced Bomb Effects for Obstacle Clearance (Analysis Task) Tim Hennessey Diane Nell Naval Surface Warfare Center, Indian Head Division 101 Strauss...need for a system capable of simultaneously breaching obstacles and clearing mines, in-stride, from over the horizon, during an amphibious assault...In response to the obstacle -breaching concern, the Enhanced Bomb Effects for Obstacle Clearance program was started. The purpose of the NSWCDD/CSS

  9. Calculation of Tip Clearance Effects in a Transonic Compressor Rotor

    NASA Technical Reports Server (NTRS)

    Chima, R. V.

    1998-01-01

    The flow through the tip clearance region of a transonic compressor rotor (NASA rotor 37) was computed and compared to aerodynamic probe and laser anemometer data. Tip clearance effects were modeled both by gridding the clearance gap and by using a simple periodicity model across the ungridded gap. The simple model was run with both the full gap height, and with half the gap height to simulate a vena-contracta effect. Comparisons between computed and measured performance maps and downstream profiles were used to validate the models and to assess the effects of gap height on the simple clearance model. Recommendations were made concern- ing the use of the simple clearance model Detailed comparisons were made between the gridded clearance gap solution and the laser anemometer data near the tip at two operating points. The computed results agreed fairly well with the data but overpredicted the extent of the casing separation and underpredicted the wake decay rate. The computations were then used to describe the interaction of the tip vortex, the passage shock, and the casing boundary layer.

  10. Calculation of tip clearance effects in a transonic compressor rotor

    NASA Technical Reports Server (NTRS)

    Chima, R. V.

    1996-01-01

    The flow through the tip clearance region of a transonic compressor rotor (NASA rotor 37) was computed and compared to aerodynamic probe and laser anemometer data. Tip clearance effects were modeled both by gridding the clearance gap and by using a simple periodicity model across the ungridded gap. The simple model was run with both the full gap height, and with half the gap height to simulate a vena-contracta effect. Comparisons between computed and measured performance maps and downstream profiles were used to validate the models and to assess the effects of gap height on the simple clearance model. Recommendations were made concerning the use of the simple clearance model. Detailed comparisons were made between the gridded clearance gap solution and the laser anemometer data near the tip at two operating points. The computer results agreed fairly well with the data but overpredicted the extent of the casing separation and underpredicted the wake decay rate. The computations were then used to describe the interaction of the tip vortex, the passage shock, and the casing boundary layer.

  11. A high sensitivity inductive sensor for blade tip clearance measurement

    NASA Astrophysics Data System (ADS)

    Du, Li; Zhu, Xiaoliang; Zhe, Jiang

    2014-06-01

    A multiplexed inductive sensor consisting of multiple mini-sized planar spiral coils for detecting multiple tip clearances of rotor blades is presented. The sensor measures the tip clearances by monitoring the inductance changes of planar spiral coils caused by the passage of the rotor blades. A resonance frequency division multiplexing technique and parallel LC resonance measurement were applied to the multiple sensor coils, making it feasible to measure multiple tip clearances using only one set of measurement electronics with high sensitivity and resolution. The results from tests conducted on a bench-top test rig have demonstrated that the sensor is capable of simultaneously measuring multiple tip clearances from 0 to 5 mm with a 10 μm resolution at a high rotary speed up to 80 000 RPM. With its high resolution, high sensitivity and capability of monitoring a large number of tip clearances simultaneously, this sensor can potentially be used for advanced active tip clearance control in turbine machinery.

  12. Model of mucociliary clearance in cystic fibrosis lungs.

    PubMed

    Kurbatova, P; Bessonov, N; Volpert, V; Tiddens, H A W M; Cornu, C; Nony, P; Caudri, D

    2015-05-07

    Mucus clearance is a primary innate defense mechanism in the human airways. Cystic fibrosis (CF) is a genetic disease caused by mutations in the gene encoding the cystic fibrosis transmembrane conductance regulator (CFTR) protein. CF is characterized by dehydration of airway surface liquid and impaired mucociliary clearance. As a result, microorganisms are not efficiently removed from the airways, and patients experience chronic pulmonary infections and inflammation. We propose a new physiologically based mathematical model of muco-ciliary transport consisting of the two major components of the mucociliary clearance system: (i) periciliary liquid layer (PCL) and (ii) mucus layer. We study mucus clearance under normal conditions and in CF patients. Restoring impaired clearance of airway secretions in one of the major goals of therapy in patients with CF. We consider the action of the aerosolized and inhaled medication dornase alfa, which reduces the viscosity of cystic fibrosis mucus, by selectively cleaving the long DNA strands it contains. The results of the model simulations stress the potential relevance of the location of the drug deposition in the central or peripheral airways. Mucus clearance was increased in case the drug was primarily deposited peripherally, i.e. in the small airways.

  13. Power subsystem automation study

    NASA Technical Reports Server (NTRS)

    Imamura, M. S.; Moser, R. L.; Veatch, M.

    1983-01-01

    Generic power-system elements and their potential faults are identified. Automation functions and their resulting benefits are defined and automation functions between power subsystem, central spacecraft computer, and ground flight-support personnel are partitioned. All automation activities were categorized as data handling, monitoring, routine control, fault handling, planning and operations, or anomaly handling. Incorporation of all these classes of tasks, except for anomaly handling, in power subsystem hardware and software was concluded to be mandatory to meet the design and operational requirements of the space station. The key drivers are long mission lifetime, modular growth, high-performance flexibility, a need to accommodate different electrical user-load equipment, onorbit assembly/maintenance/servicing, and potentially large number of power subsystem components. A significant effort in algorithm development and validation is essential in meeting the 1987 technology readiness date for the space station.

  14. Automated telescope scheduling

    NASA Astrophysics Data System (ADS)

    Johnston, Mark D.

    1988-08-01

    With the ever increasing level of automation of astronomical telescopes the benefits and feasibility of automated planning and scheduling are becoming more apparent. Improved efficiency and increased overall telescope utilization are the most obvious goals. Automated scheduling at some level has been done for several satellite observatories, but the requirements on these systems were much less stringent than on modern ground or satellite observatories. The scheduling problem is particularly acute for Hubble Space Telescope: virtually all observations must be planned in excruciating detail weeks to months in advance. Space Telescope Science Institute has recently made significant progress on the scheduling problem by exploiting state-of-the-art artificial intelligence software technology. What is especially interesting is that this effort has already yielded software that is well suited to scheduling groundbased telescopes, including the problem of optimizing the coordinated scheduling of more than one telescope.

  15. Automated telescope scheduling

    NASA Technical Reports Server (NTRS)

    Johnston, Mark D.

    1988-01-01

    With the ever increasing level of automation of astronomical telescopes the benefits and feasibility of automated planning and scheduling are becoming more apparent. Improved efficiency and increased overall telescope utilization are the most obvious goals. Automated scheduling at some level has been done for several satellite observatories, but the requirements on these systems were much less stringent than on modern ground or satellite observatories. The scheduling problem is particularly acute for Hubble Space Telescope: virtually all observations must be planned in excruciating detail weeks to months in advance. Space Telescope Science Institute has recently made significant progress on the scheduling problem by exploiting state-of-the-art artificial intelligence software technology. What is especially interesting is that this effort has already yielded software that is well suited to scheduling groundbased telescopes, including the problem of optimizing the coordinated scheduling of more than one telescope.

  16. Fully automated protein purification

    PubMed Central

    Camper, DeMarco V.; Viola, Ronald E.

    2009-01-01

    Obtaining highly purified proteins is essential to begin investigating their functional and structural properties. The steps that are typically involved in purifying proteins can include an initial capture, intermediate purification, and a final polishing step. Completing these steps can take several days and require frequent attention to ensure success. Our goal was to design automated protocols that will allow the purification of proteins with minimal operator intervention. Separate methods have been produced and tested that automate the sample loading, column washing, sample elution and peak collection steps for ion-exchange, metal affinity, hydrophobic interaction and gel filtration chromatography. These individual methods are designed to be coupled and run sequentially in any order to achieve a flexible and fully automated protein purification protocol. PMID:19595984

  17. 76 FR 59379 - Proposed Information Collection; Comment Request; Generic Clearance for Research in Development...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-26

    ... Clearance for Research in Development of Disclosure Forms September 20, 2011. Summary: The Bureau of...): ``Generic Clearance for Research in Development of Disclosure Forms'' to OMB for review and clearance under... Clearance for Research in Development of Disclosure Forms. Abstract: The Dodd-Frank Wall Street Reform and...

  18. 48 CFR 245.603-70 - Contractor performance of plant clearance duties.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... plant clearance duties. 245.603-70 Section 245.603-70 Federal Acquisition Regulations System DEFENSE..., Redistribution, and Disposal of Contractor Inventory 245.603-70 Contractor performance of plant clearance duties... clearance functions if the volume of plant clearance warrants performance by the contractor. (2) The...

  19. 48 CFR 245.7101-4 - DD Form 1640, Request for Plant Clearance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Plant Clearance. 245.7101-4 Section 245.7101-4 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT GOVERNMENT PROPERTY Plant Clearance Forms 245.7101-4 DD Form 1640, Request for Plant Clearance. Use to request plant clearance assistance...

  20. 48 CFR 245.7002 - Duties and responsibilities of plant clearance officers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... responsibilities of plant clearance officers. 245.7002 Section 245.7002 Federal Acquisition Regulations System... Appointment of Property Administrators and Plant Clearance Officers 245.7002 Duties and responsibilities of plant clearance officers. The plant clearance officer shall— (a) Instruct the contractor on...

  1. [Estimation of glomerular filtration rate by inulin clearance: comparison with creatinine clearance].

    PubMed

    Orita, Yoshimasa; Gejyo, Fumitake; Sakatsume, Minoru; Shiigai, Tatsuo; Maeda, Yoshitaka; Imai, Enyu; Fujii, Takashi; Endoh, Masayuki; Jinde, Kiichiro; Haneda, Masakazu; Sugimoto, Toshiro; Hishida, Akira; Takahashi, Satoru; Hosoya, Tatsuo; Yamamoto, Hiroyasu; Hora, Kazuhiko; Okada, Yoichi; Hosaka, Shigetoshi; Oguchi, Tomomasa; Kanno, Yutaka; Nishio, Yasuhide; Yano, Shintaro; Aikawa, Kazuo; Yasui, Kiyoshi

    2005-01-01

    Inulin clearance (Cin) is widely believed to be the gold standard of the glomerular filtration rate (GFR). However, in Japan, Cin has not been officially recognized by the Ministry of Health, Labour and Welfare of Japan for clinical use. Creatinine clearance (Ccr) has been used to estimate the renal function of patients, but there have been many studies in which Ccr estimates were GFR falsely high because the metabolism and tubular excretion of creatinine widely varied according to the pathophysiological state of the patient. In the present study, we determined Cin and Ccr simultaneously in 116 adult patients with renal diseases and diabetic mellitus. The clearance study was performed by the modified Wesson's method. The inulin preparation was FFI-1010 (Fuji Yakuhin Co. Ltd.). Inulin in serum and urine was determined by the newly devised enzymatic assay (Toyobo Co. Ltd.), which is specific for inulin. The mean Cin was 35.0 +/- 14.4 ml/min/1.73 m2. The mean Ccr(the enzyme assay) was 63.6 +/- 24.1 ml/min/1.73 m2 and that of the kinetic Jaffe assay was 55.3 +/- 19.3 ml/min/1.73 m2. Mean Ccr/Cin was 1.93 +/- 0.73, 1.69 +/- 0.62, respectively. This ratio was significantly different(p < 0.05) in the degree of reduction of Cin, with values of 2.07 +/- 0.82 (Cin < 40 ml/min/1.73 m2) and 1.64 +/- 0.32(40 < Cin < 80 ml/min/1.73 m2), respectively. Only 8 patients were classified into the same degree of reduced renal function (the Guideline of Japanese Society of Nephrology). The findings of this study suggest that the GFR determined by Ccr could misjudge the renal function of patient and delay the administration of proper treatment of the patient. Introduction of Cin into the clinical field is necessary to avoid this delay.

  2. Clearance Prediction of Targeted Covalent Inhibitors by In Vitro-In Vivo Extrapolation of Hepatic and Extrahepatic Clearance Mechanisms.

    PubMed

    Leung, Louis; Yang, Xin; Strelevitz, Timothy J; Montgomery, Justin; Brown, Matthew F; Zientek, Michael A; Banfield, Christopher; Gilbert, Adam M; Thorarensen, Atli; Dowty, Martin E

    2017-01-01

    The concept of target-specific covalent enzyme inhibitors appears attractive from both an efficacy and a selectivity viewpoint considering the potential for enhanced biochemical efficiency associated with an irreversible mechanism. Aside from potential safety concerns, clearance prediction of covalent inhibitors represents a unique challenge due to the inclusion of nontraditional metabolic pathways of direct conjugation with glutathione (GSH) or via GSH S-transferase-mediated processes. In this article, a novel pharmacokinetic algorithm was developed using a series of Pfizer kinase selective acrylamide covalent inhibitors based on their in vitro-in vivo extrapolation of systemic clearance in rats. The algorithm encompasses the use of hepatocytes as an in vitro model for hepatic clearance due to oxidative metabolism and GSH conjugation, and the use of whole blood as an in vitro surrogate for GSH conjugation in extrahepatic tissues. Initial evaluations with clinical covalent inhibitors suggested that the scaling algorithm developed from rats may also be useful for human clearance prediction when species-specific parameters, such as hepatocyte and blood stability and blood binding, were considered. With careful consideration of clearance mechanisms, the described in vitro-in vivo extrapolation approach may be useful to facilitate candidate optimization, selection, and prediction of human pharmacokinetic clearance during the discovery and development of targeted covalent inhibitors.

  3. Automated gas chromatography

    DOEpatents

    Mowry, Curtis D.; Blair, Dianna S.; Rodacy, Philip J.; Reber, Stephen D.

    1999-01-01

    An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute.

  4. Automation in optics manufacturing

    NASA Astrophysics Data System (ADS)

    Pollicove, Harvey M.; Moore, Duncan T.

    1991-01-01

    The optics industry has not followed the lead of the machining and electronics industries in applying advances in computer aided engineering (CAE), computer assisted manufacturing (CAM), automation or quality management techniques. Automation based on computer integrated manufacturing (CIM) and flexible machining systems (FMS) has been widely implemented in these industries. Optics continues to rely on standalone equipment that preserves the highly skilled, labor intensive optical fabrication systems developed in the 1940's. This paper describes development initiatives at the Center for Optics Manufacturing that will create computer integrated manufacturing technology and support processes for the optical industry.

  5. Automated software development workstation

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Engineering software development was automated using an expert system (rule-based) approach. The use of this technology offers benefits not available from current software development and maintenance methodologies. A workstation was built with a library or program data base with methods for browsing the designs stored; a system for graphical specification of designs including a capability for hierarchical refinement and definition in a graphical design system; and an automated code generation capability in FORTRAN. The workstation was then used in a demonstration with examples from an attitude control subsystem design for the space station. Documentation and recommendations are presented.

  6. Automating the CMS DAQ

    SciTech Connect

    Bauer, G.; et al.

    2014-01-01

    We present the automation mechanisms that have been added to the Data Acquisition and Run Control systems of the Compact Muon Solenoid (CMS) experiment during Run 1 of the LHC, ranging from the automation of routine tasks to automatic error recovery and context-sensitive guidance to the operator. These mechanisms helped CMS to maintain a data taking efficiency above 90% and to even improve it to 95% towards the end of Run 1, despite an increase in the occurrence of single-event upsets in sub-detector electronics at high LHC luminosity.

  7. Automated Library System Specifications.

    DTIC Science & Technology

    1986-06-01

    AD-A78 95 AUTOMATED LIBRARY SYSTEM SPECIFICATIONS(U) ARMY LIBRARY /i MANAGEMENT OFFICE ALEXANDRIA VA ASSISTANT CHIEF OF STAFF FOR INFORMATION... MANAGEMENT M B BONNETT JUN 86 UNCLASSIFIED F/G 9/2 NLEElIIhllEEEEE IllEEEEEllllEI .1lm lliml * ~I fI.L25 MI, [OCM RL,;OCLUTO fl. ’N k~ AUTOMATED LIBRARY...SYSTEM SPECIFICATIONS .,I Prepared by Mary B. Bonnett ARMY LIBRARY MANAGEMENT OFFICE OFFICE OF THE ASSISTANT CHIEF OF STAFF FOR INFORMATION MANAGEMENT Lij

  8. Automated HMC assembly

    SciTech Connect

    Blazek, R.J.

    1993-08-01

    An automated gold wire bonder was characterized for bonding 1-mil gold wires to gallium-arsenide (GaAs) monolithic microwave integrated circuits (MMICs) which are used in microwave radar transmitter-receiver (T/R) modules. Acceptable gold wire bond test results were obtained for the fragile, 5-mil-thick GaAs MMICs with gold-metallized bond pads; and average wire bond pull strengths, shear strengths, and failure modes were determined. An automated aluminum wire bonder was modified to be used as a gold wire bonder so that a wedge bond capability was available for GaAs MMICs in addition to the gold ball bond capability.

  9. Automated knowledge generation

    NASA Technical Reports Server (NTRS)

    Myler, Harley R.; Gonzalez, Avelino J.

    1988-01-01

    The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

  10. Decision Making In A High-Tech World: Automation Bias and Countermeasures

    NASA Technical Reports Server (NTRS)

    Mosier, Kathleen L.; Skitka, Linda J.; Burdick, Mark R.; Heers, Susan T.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Automated decision aids and decision support systems have become essential tools in many high-tech environments. In aviation, for example, flight management systems computers not only fly the aircraft, but also calculate fuel efficient paths, detect and diagnose system malfunctions and abnormalities, and recommend or carry out decisions. Air Traffic Controllers will soon be utilizing decision support tools to help them predict and detect potential conflicts and to generate clearances. Other fields as disparate as nuclear power plants and medical diagnostics are similarly becoming more and more automated. Ideally, the combination of human decision maker and automated decision aid should result in a high-performing team, maximizing the advantages of additional cognitive and observational power in the decision-making process. In reality, however, the presence of these aids often short-circuits the way that even very experienced decision makers have traditionally handled tasks and made decisions, and introduces opportunities for new decision heuristics and biases. Results of recent research investigating the use of automated aids have indicated the presence of automation bias, that is, errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers inappropriately follow an automated directive, or automation omission errors, i.e., errors made when humans fail to take action or notice a problem because an automated aid fails to inform them, can result from this tendency. Evidence of the tendency to make automation-related omission and commission errors has been found in pilot self reports, in studies using pilots in flight simulations, and in non-flight decision making contexts with student samples. Considerable research has found that increasing social accountability can successfully ameliorate a broad array of cognitive biases and

  11. Decision Making In A High-Tech World: Automation Bias and Countermeasures

    NASA Technical Reports Server (NTRS)

    Mosier, Kathleen L.; Skitka, Linda J.; Burdick, Mark R.; Heers, Susan T.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Automated decision aids and decision support systems have become essential tools in many high-tech environments. In aviation, for example, flight management systems computers not only fly the aircraft, but also calculate fuel efficient paths, detect and diagnose system malfunctions and abnormalities, and recommend or carry out decisions. Air Traffic Controllers will soon be utilizing decision support tools to help them predict and detect potential conflicts and to generate clearances. Other fields as disparate as nuclear power plants and medical diagnostics are similarly becoming more and more automated. Ideally, the combination of human decision maker and automated decision aid should result in a high-performing team, maximizing the advantages of additional cognitive and observational power in the decision-making process. In reality, however, the presence of these aids often short-circuits the way that even very experienced decision makers have traditionally handled tasks and made decisions, and introduces opportunities for new decision heuristics and biases. Results of recent research investigating the use of automated aids have indicated the presence of automation bias, that is, errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers inappropriately follow an automated directive, or automation omission errors, i.e., errors made when humans fail to take action or notice a problem because an automated aid fails to inform them, can result from this tendency. Evidence of the tendency to make automation-related omission and commission errors has been found in pilot self reports, in studies using pilots in flight simulations, and in non-flight decision making contexts with student samples. Considerable research has found that increasing social accountability can successfully ameliorate a broad array of cognitive biases and

  12. Altering user' acceptance of automation through prior automation exposure.

    PubMed

    Bekier, Marek; Molesworth, Brett R C

    2016-08-22

    Air navigation service providers worldwide see increased use of automation as one solution to overcome the capacity constraints imbedded in the present air traffic management (ATM) system. However, increased use of automation within any system is dependent on user acceptance. The present research sought to determine if the point at which an individual is no longer willing to accept or cooperate with automation can be manipulated. Forty participants underwent training on a computer-based air traffic control programme, followed by two ATM exercises (order counterbalanced), one with and one without the aid of automation. Results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation ('tipping point') decreased; suggesting it is indeed possible to alter automation acceptance. Practitioner Summary: This paper investigates whether the point at which a user of automation rejects automation (i.e. 'tipping point') is constant or can be manipulated. The results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation decreased; suggesting it is possible to alter automation acceptance.

  13. Clearance and binding of native and defucosylated lactoferrin.

    PubMed Central

    Imber, M J; Pizzo, S V

    1983-01-01

    These studies explore the role of carbohydrate recognition systems and the direct involvement of terminal alpha 1-3-linked fucose in the clearance of lactoferrin from the murine circulation and in the specific binding of lactoferrin to receptors on murine peritoneal macrophages. As previously reported, radiolabelled lactoferrin cleared very rapidly (t1/2 less than 1 min) after intravenous injection into mice. However, competing levels of ligands specific for the hepatic galactose receptor (asialo-orosomucoid), the hepatic fucose receptor (fucosyl-bovine serum albumin), and the mononuclear-phagocyte system pathway recognizing mannose, N-acetylglucosamine and fucose (mannosyl-, N-acetylglucosaminyl- and fucosyl-bovine serum albumin) did not block radiolabelled lactoferrin clearance in vivo or binding to mouse peritoneal macrophage monolayers in vitro. Almond emulsin alpha 1-3-fucosidase was used to prepare defucosylated lactoferrin in which 88% of the alpha 1-3-linked fucose was hydrolysed. No difference in clearance or receptor binding was observed between radiolabelled native and defucosylated lactoferrin. Fucoidin, a fucose-rich algal polysaccharide, completely inhibits the clearance in vivo and macrophage binding in vitro of lactoferrin. This effect, however, is probably not the result of competition for binding to the fucose receptor, since gel-filtration studies demonstrated formation of a stable complex between lactoferrin and fucoidin. The present results indicate that the lactoferrin-clearance pathway is distinct from several pathways mediating glycoprotein clearance through recognition of terminal galactose, fucose, N-acetylglucosamine or mannose. Furthermore, alpha 1-3-linked fucose on lactoferrin is not essential for lactoferrin clearance in vivo or specific binding to macrophage receptors in vitro. Images Fig. 3. PMID:6882370

  14. Human Factors In Aircraft Automation

    NASA Technical Reports Server (NTRS)

    Billings, Charles

    1995-01-01

    Report presents survey of state of art in human factors in automation of aircraft operation. Presents examination of aircraft automation and effects on flight crews in relation to human error and aircraft accidents.

  15. Experimental Evaluation of an Integrated Datalink and Automation-Based Strategic Trajectory Concept

    NASA Technical Reports Server (NTRS)

    Mueller, Eric

    2007-01-01

    This paper presents research on the interoperability of trajectory-based automation concepts and technologies with modern Flight Management Systems and datalink communication available on many of today s commercial aircraft. A tight integration of trajectory-based ground automation systems with the aircraft Flight Management System through datalink will enable mid-term and far-term benefits from trajectory-based automation methods. A two-way datalink connection between the trajectory-based automation resident in the Center/TRACON Automation System and the Future Air Navigation System-1 integrated FMS/datalink in NASA Ames B747-400 Level D simulator has been established and extensive simulation of the use of datalink messages to generate strategic trajectories completed. A strategic trajectory is defined as an aircraft deviation needed to solve a conflict or honor a route request and then merge the aircraft back to its nominal preferred trajectory using a single continuous trajectory clearance. Engineers on the ground side of the datalink generated lateral and vertical trajectory clearances and transmitted them to the Flight Management System of the 747; the airborne automation then flew the new trajectory without human intervention, requiring the flight crew only to review and to accept the trajectory. This simulation established the protocols needed for a significant majority of the trajectory change types required to solve a traffic conflict or deviate around weather. This demonstration provides a basis for understanding the requirements for integration of trajectory-based automation with current Flight Management Systems and datalink to support future National Airspace System operations.

  16. Automated Management Of Documents

    NASA Technical Reports Server (NTRS)

    Boy, Guy

    1995-01-01

    Report presents main technical issues involved in computer-integrated documentation. Problems associated with automation of management and maintenance of documents analyzed from perspectives of artificial intelligence and human factors. Technologies that may prove useful in computer-integrated documentation reviewed: these include conventional approaches to indexing and retrieval of information, use of hypertext, and knowledge-based artificial-intelligence systems.

  17. Guide to Library Automation.

    ERIC Educational Resources Information Center

    Toohill, Barbara G.

    Directed toward librarians and library administrators who wish to procure automated systems or services for their libraries, this guide offers practical suggestions, advice, and methods for determining requirements, estimating costs and benefits, writing specifications procuring systems, negotiating contracts, and installing systems. The advice…

  18. Automated Management Of Documents

    NASA Technical Reports Server (NTRS)

    Boy, Guy

    1995-01-01

    Report presents main technical issues involved in computer-integrated documentation. Problems associated with automation of management and maintenance of documents analyzed from perspectives of artificial intelligence and human factors. Technologies that may prove useful in computer-integrated documentation reviewed: these include conventional approaches to indexing and retrieval of information, use of hypertext, and knowledge-based artificial-intelligence systems.

  19. Microcontroller for automation application

    NASA Technical Reports Server (NTRS)

    Cooper, H. W.

    1975-01-01

    The description of a microcontroller currently being developed for automation application was given. It is basically an 8-bit microcomputer with a 40K byte random access memory/read only memory, and can control a maximum of 12 devices through standard 15-line interface ports.

  20. Building Automation Systems.

    ERIC Educational Resources Information Center

    Honeywell, Inc., Minneapolis, Minn.

    A number of different automation systems for use in monitoring and controlling building equipment are described in this brochure. The system functions include--(1) collection of information, (2) processing and display of data at a central panel, and (3) taking corrective action by sounding alarms, making adjustments, or automatically starting and…

  1. Automated Estimating System (AES)

    SciTech Connect

    Holder, D.A.

    1989-09-01

    This document describes Version 3.1 of the Automated Estimating System, a personal computer-based software package designed to aid in the creation, updating, and reporting of project cost estimates for the Estimating and Scheduling Department of the Martin Marietta Energy Systems Engineering Division. Version 3.1 of the Automated Estimating System is capable of running in a multiuser environment across a token ring network. The token ring network makes possible services and applications that will more fully integrate all aspects of information processing, provides a central area for large data bases to reside, and allows access to the data base by multiple users. Version 3.1 of the Automated Estimating System also has been enhanced to include an Assembly pricing data base that may be used to retrieve cost data into an estimate. A WBS Title File program has also been included in Version 3.1. The WBS Title File program allows for the creation of a WBS title file that has been integrated with the Automated Estimating System to provide WBS titles in update mode and in reports. This provides for consistency in WBS titles and provides the capability to display WBS titles on reports generated at a higher WBS level.

  2. Automated Essay Scoring

    ERIC Educational Resources Information Center

    Dikli, Semire

    2006-01-01

    The impacts of computers on writing have been widely studied for three decades. Even basic computers functions, i.e. word processing, have been of great assistance to writers in modifying their essays. The research on Automated Essay Scoring (AES) has revealed that computers have the capacity to function as a more effective cognitive tool (Attali,…

  3. Automated Microbial Genome Annotation

    SciTech Connect

    Land, Miriam

    2009-05-29

    Miriam Land of the DOE Joint Genome Institute at Oak Ridge National Laboratory gives a talk on the current state and future challenges of moving toward automated microbial genome annotation at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

  4. Building Automation Systems.

    ERIC Educational Resources Information Center

    Honeywell, Inc., Minneapolis, Minn.

    A number of different automation systems for use in monitoring and controlling building equipment are described in this brochure. The system functions include--(1) collection of information, (2) processing and display of data at a central panel, and (3) taking corrective action by sounding alarms, making adjustments, or automatically starting and…

  5. Automated Tendering and Purchasing.

    ERIC Educational Resources Information Center

    DeZorzi, James M.

    1980-01-01

    The Middlesex County Board of Education in Hyde Park (Ontario) has developed an automated tendering/purchasing system for ordering standard items that has reduced by 80 percent the time required for tendering, evaluating, awarding, and ordering items. (Author/MLF)

  6. Automated conflict resolution issues

    NASA Technical Reports Server (NTRS)

    Wike, Jeffrey S.

    1991-01-01

    A discussion is presented of how conflicts for Space Network resources should be resolved in the ATDRSS era. The following topics are presented: a description of how resource conflicts are currently resolved; a description of issues associated with automated conflict resolution; present conflict resolution strategies; and topics for further discussion.

  7. ATC automation concepts

    NASA Technical Reports Server (NTRS)

    Erzberger, Heinz

    1990-01-01

    Information on the design of human-centered tools for terminal area air traffic control (ATC) is given in viewgraph form. Information is given on payoffs and products, guidelines, ATC as a team process, automation tools for ATF, and the traffic management advisor.

  8. Automated Administrative Data Bases

    NASA Technical Reports Server (NTRS)

    Marrie, M. D.; Jarrett, J. R.; Reising, S. A.; Hodge, J. E.

    1984-01-01

    Improved productivity and more effective response to information requirements for internal management, NASA Centers, and Headquarters resulted from using automated techniques. Modules developed to provide information on manpower, RTOPS, full time equivalency, and physical space reduced duplication, increased communication, and saved time. There is potential for greater savings by sharing and integrating with those who have the same requirements.

  9. Automating Small Libraries.

    ERIC Educational Resources Information Center

    Swan, James

    1996-01-01

    Presents a four-phase plan for small libraries strategizing for automation: inventory and weeding, data conversion, implementation, and enhancements. Other topics include selecting a system, MARC records, compatibility, ease of use, industry standards, searching capabilities, support services, system security, screen displays, circulation modules,…

  10. Automated Lumber Processing

    Treesearch

    Powsiri Klinkhachorn; J. Moody; Philip A. Araman

    1995-01-01

    For the past few decades, researchers have devoted time and effort to apply automation and modern computer technologies towards improving the productivity of traditional industries. To be competitive, one must streamline operations and minimize production costs, while maintaining an acceptable margin of profit. This paper describes the effort of one such endeavor...

  11. Personnel Department Automation.

    ERIC Educational Resources Information Center

    Wilkinson, David

    In 1989, the Austin Independent School District's Office of Research and Evaluation was directed to monitor the automation of personnel information and processes in the district's Department of Personnel. Earlier, a study committee appointed by the Superintendent during the 1988-89 school year identified issues related to Personnel Department…

  12. Automated Accounting. Instructor Guide.

    ERIC Educational Resources Information Center

    Moses, Duane R.

    This curriculum guide was developed to assist business instructors using Dac Easy Accounting College Edition Version 2.0 software in their accounting programs. The module consists of four units containing assignment sheets and job sheets designed to enable students to master competencies identified in the area of automated accounting. The first…

  13. Automated Student Model Improvement

    ERIC Educational Resources Information Center

    Koedinger, Kenneth R.; McLaughlin, Elizabeth A.; Stamper, John C.

    2012-01-01

    Student modeling plays a critical role in developing and improving instruction and instructional technologies. We present a technique for automated improvement of student models that leverages the DataShop repository, crowd sourcing, and a version of the Learning Factors Analysis algorithm. We demonstrate this method on eleven educational…

  14. Validating Automated Speaking Tests

    ERIC Educational Resources Information Center

    Bernstein, Jared; Van Moere, Alistair; Cheng, Jian

    2010-01-01

    This paper presents evidence that supports the valid use of scores from fully automatic tests of spoken language ability to indicate a person's effectiveness in spoken communication. The paper reviews the constructs, scoring, and the concurrent validity evidence of "facility-in-L2" tests, a family of automated spoken language tests in Spanish,…

  15. Automated EEG acquisition

    NASA Technical Reports Server (NTRS)

    Frost, J. D., Jr.; Hillman, C. E., Jr.

    1977-01-01

    Automated self-contained portable device can be used by technicians with minimal training. Data acquired from patient at remote site are transmitted to centralized interpretation center using conventional telephone equipment. There, diagnostic information is analyzed, and results are relayed back to remote site.

  16. Estimating creatinine clearance: a meta-analysis.

    PubMed

    Wilhelm, Sheila M; Kale-Pradhan, Pramodini B

    2011-07-01

    To determine which body weight descriptor most accurately predicts measured creatinine clearance (Cl(cr)) and whether rounding serum creatinine concentration (S(cr)) to 1 mg/dl when it is less than 1 mg/dl accurately predicts measured Cl(cr). Meta-analysis of 13 English-language trials comparing 24-hour measured Cl(cr) with Cockcroft-Gault estimated Cl(cr) by using various body weights or rounded S(cr) values. A total of 1197 patients (mean age 53.3 yrs, 48.7% male) were included in the meta-analysis. A thorough literature search of the PubMed, MEDLINE, and the Cochrane Library databases was performed (1976-June 2010) to identify relevant clinical trials. Patient population, number of subjects, age, and 24-hour measured and estimated Cl(cr) were extracted independently by two investigators by using standardized data collection forms. Mean difference (MD) between estimated and measured Cl(cr) was assessed. Thirteen studies met all selection criteria. A random-effects model was applied secondary to a high level of heterogeneity among the studies (I(2)>50%). Total body weight in the Cockcroft-Gault equation overestimated measured Cl(cr) (MD 15.91 ml/min, 95% confidence interval [CI] 7.17-24.65 ml/min). Ideal body weight underestimated Cl(cr) (MD-5.15 ml/min, 95% CI -9.92 to -0.38 ml/min). No body weight (i.e., assumes body weight is 72 kg, thus removing the factor of 72 from the denominator of the equation) closely estimated Cl(cr) (MD 0.43 ml/min, 95% CI -5.42-6.27 ml/min). Adjusted body weight with correction factors of 0.3 or 0.4 also closely estimated Cl(cr) (MD 4.55 ml/min, 95% CI -11.41-20.50 ml/min, and MD 19.94 ml/min, 95% CI -9.6-49.49 ml/min, respectively). Total body weight with a rounded S(cr) value closely estimated measured Cl(cr) (MD 3.51 ml/min, 95% CI -17.18-24.20 ml/min). Ideal body weight with a rounded S(cr) value underestimated Cl(cr) (MD -29.45 ml/min, 95% CI -48.46 to -10.43). Using the Cockcroft-Gault equation with no body weight and actual S

  17. Alcohol consumption decreases lactate clearance in acutely injured patients☆

    PubMed Central

    Dezman, Zachary D.W.; Comer, Angela C.; Narayan, Mayur; Scalea, Thomas M.; Hirshon, Jon Mark; Smith, Gordon S.

    2017-01-01

    Introduction Alcohol, a common risk factor for injury, has direct toxic effects on the liver. The use of lactate clearance has been well described as an indicator of the adequacy of resuscitation in injured patients. We investigated whether acutely injured patients with positive blood alcohol content (+BAC) had less lactate clearance than sober patients. Methods We conducted a retrospective cohort study of acutely injured patients treated at an urban Level 1 trauma centre between January 2010 and December 2012. Blood alcohol and venous lactate levels were measured on all patients at the time of arrival. Study subjects were patients transported directly from the scene of injury, who had an elevated lactate concentration on arrival (≥3.0 mmol/L) and at least one subsequent lactate measurement within 24 h after admission. Lactate clearance ([Lactate1 − Lactate2]/Lactate1) was calculated for all patients. Chi-squared tests were used to compare values from sober and intoxicated subjects. Lactate clearance was plotted against alcohol levels and stratified by age and Injury Severity Score (ISS). Results Serial lactate concentration measurements were obtained in 3910 patients; 1674 of them had +BAC. Patients with +BAC were younger (mean age: 36.6 [SD 14.7] vs 41.0 [SD 19.9] years [p = 0.0001]), were more often male (83.4% vs 75.9% [p = 0.0001]), had more minor injuries (ISS < 9) (33.8% vs 27.1% [p = 0.0001]), had a lower in-hospital mortality rate (1.4% vs 3.9% [p = 0.0001]), but also had lower average lactate clearance (37.8% vs 47.6% [p = 0.0001]). The lactate clearance of the sober patients (47.6 [SD 33.5]) was twice that of those with +BAC >400 (23.5 [SD 6.5]). Lactate clearance decreased with increasing BAC irrespective of age and ISS. Conclusions In a large group of acutely injured patients, a dose-dependent decrease in lactate clearance was seen in those with elevated BAC. This relationship will cause a falsely elevated lactate reading or prolong lactate

  18. Automated Inadvertent Intruder Application

    SciTech Connect

    Koffman, Larry D.; Lee, Patricia L.; Cook, James R.; Wilhite, Elmer L.

    2008-01-15

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

  19. Acute effects of ethanol on renal folate clearance in rats

    SciTech Connect

    Eisenga, B.H.; McMartin, K.E.

    1986-03-05

    Studies of the renal clearance of folic acid in primates demonstrate net reabsorption of folate by a saturable system. The acute administration of ethanol to rats causes a significant increase in urinary folate excretion. The mechanism for this effect is unknown and thus the effect of acute administration of ethanol on the renal absorption and urinary clearance of folate was studied in rats. Folic acid was administered to male Sprague-Dawley rats via continuous intravenous infusion in doses ranging from 3-75 micromoles/kg and renal clearance relative to inulin was determined. The effects of various dose levels of ethanol on these parameters were then determined. At a dose of 15 micromoles/kg, the renal clearance of folate relative to that of inulin was about 0.65 mg/min. At a plasma ethanol level about 100 mg/dl, the renal clearance of folate was not markedly altered. These results suggests that there is net reabsorption of folate in the rat kidney and that moderate doses of ethanol have little effect on renal effect on renal folate reabsorption.

  20. Experimental and Numerical Study on Blanking Process with Negative Clearance

    NASA Astrophysics Data System (ADS)

    Hirota, Kenji; Yanaga, Hiroki; Fukushima, Katsunori

    This study summarizes the characteristics of blanking behavior with a negative clearance. Several experiments were performed for two aluminum sheets over a wide range of clearances including negative values. Blanking with negatively large clearances was found to produce fine cut edges with less roll-over and no fracture zone even for a brittle material. Corresponding simulations were performed using the Ayada's criterion for predicting ductile fracture initiation. Each zone of blanked part edges such as roll-over and fractured zone agreed well with that obtained in the experiments except a few cases accompanied by secondary shear. The reason for prevention of fracture by using negative clearances was explained with the change of the damage value during the process; the damage value was kept low throughout the blanking operation since the mean stress dominating the damage value became compressive around the die edge. Influences of blanking parameters on load-stroke curves were also investigated. The curves for negative clearances showed gradual increase in load toward the end of stroke. The earlier fracture initiated, the earlier the load reached a peak. Simulated curves showed the same tendency and in good agreement with the experimental ones quantitatively.

  1. Automating spectral measurements

    NASA Astrophysics Data System (ADS)

    Goldstein, Fred T.

    2008-09-01

    This paper discusses the architecture of software utilized in spectroscopic measurements. As optical coatings become more sophisticated, there is mounting need to automate data acquisition (DAQ) from spectrophotometers. Such need is exacerbated when 100% inspection is required, ancillary devices are utilized, cost reduction is crucial, or security is vital. While instrument manufacturers normally provide point-and-click DAQ software, an application programming interface (API) may be missing. In such cases automation is impossible or expensive. An API is typically provided in libraries (*.dll, *.ocx) which may be embedded in user-developed applications. Users can thereby implement DAQ automation in several Windows languages. Another possibility, developed by FTG as an alternative to instrument manufacturers' software, is the ActiveX application (*.exe). ActiveX, a component of many Windows applications, provides means for programming and interoperability. This architecture permits a point-and-click program to act as automation client and server. Excel, for example, can control and be controlled by DAQ applications. Most importantly, ActiveX permits ancillary devices such as barcode readers and XY-stages to be easily and economically integrated into scanning procedures. Since an ActiveX application has its own user-interface, it can be independently tested. The ActiveX application then runs (visibly or invisibly) under DAQ software control. Automation capabilities are accessed via a built-in spectro-BASIC language with industry-standard (VBA-compatible) syntax. Supplementing ActiveX, spectro-BASIC also includes auxiliary serial port commands for interfacing programmable logic controllers (PLC). A typical application is automatic filter handling.

  2. Impaired lipid clearance in patients with previous acute pancreatitis.

    PubMed Central

    Guzmán, S; Nervi, F; Llanos, O; León, P; Valdivieso, V

    1985-01-01

    Fasting serum triglycerides were measured in 52 patients who had sustained an attack of pancreatitis (gall stone related 33, alcoholism six) at least six months earlier. Several patients (23%) had raised fasting serum triglycerides, with a type IV phenotype in all but one patient. The 40 patients with normal fasting serum triglycerides received an oral load of 100 g sunflower oil to compare their clearance of dietary triglycerides with that of a control group of 54 subjects. The clearance of ingested triglycerides was significantly impaired in the patients - irrespective of the presumed aetiological factor, or clinical condition associated with pancreatitis - compared with the clearance in controls. A triglyceride tolerance test is the only way to detect those patients in whom a future attack of pancreatitis may be precipitated by a diet rich in fat, or endogenous over production of triglycerides as after an alcoholic debauch. PMID:4029716

  3. Application of Dsm in Obstacle Clearance Surveying of Aerodrome

    NASA Astrophysics Data System (ADS)

    Qiao, X.; Lv, S. H.; Li, L. L.; Zhou, X. J.; Wang, H. Y.; Li, D.; Liu, J. Y.

    2016-06-01

    Compared to the wide use of digital elevation model (DEM), digital surface model (DSM) receives less attention because that it is composed by not only terrain surface, but also vegetations and man-made objects which are usually regarded as useless information. Nevertheless, these objects are useful for the identification of obstacles around an aerodrome. The primary objective of the study was to determine the applicability of DSM in obstacle clearance surveying of aerodrome. According to the requirements of obstacle clearance surveying at QT airport, aerial and satellite imagery were used to generate DSM, by means of photogrammetry, which was spatially analyzed with the hypothetical 3D obstacle limitation surfaces (OLS) to identify the potential obstacles. Field surveying was then carried out to retrieve the accurate horizontal position and height of the obstacles. The results proved that the application of DSM could make considerable improvement in the efficiency of obstacle clearance surveying of aerodrome.

  4. Clearance of inhaled ceramic fibers from rat lungs.

    PubMed Central

    Yamato, H; Tanaka, I; Higashi, T; Kido, M

    1994-01-01

    Deposition, clearance, retention, and durability of inhaled particles in lung are important factors for induction of pulmonary fibrosis or lung cancer. To study the deposition and clearance of aluminium silicate ceramic fibers from the lung, male Wistar rats were exposed to ceramic fibers, with a mass median aerodynamic diameter (MMAD) of 3.7 microns, for 6 hr/day, 5 days/week for 2 weeks. The average exposure concentration was 27.2 mg/m3 (SD 9.0). The rats were killed at 1 day, 1 month, 3 months, and 6 months after the end of exposure, and the fiber numbers and dimensions were measured with a scanning electron microscope. No significant difference in length of residual ceramic fibers in the lungs was found among the groups. The geometric mean diameter and number of ceramic fibers, however, decreased according to the clearance period. These findings suggest that the fibers were dissolved at their surface. PMID:7882924

  5. Fiber-optic laser Doppler turbine tip clearance probe.

    PubMed

    Büttner, Lars; Pfister, Thorsten; Czarske, Jürgen

    2006-05-01

    A laser Doppler based method for in situ single blade tip clearance measurements of turbomachines with high precision is presented for what we believe is the first time. The sensor is based on two superposed fanlike interference fringe systems generated by two laser wavelengths from a fiber-coupled, passive, and therefore compact measurement head employing diffractive optics. Tip clearance measurements at a transonic centrifugal compressor performed during operation at 50,000 rpm (833 Hz, 586 m/s tip speed) are reported. At these speeds the measured uncertainty of the tip position was less than 20 microm, a factor of 2 more accurate than that of capacitive probes. The sensor offers great potential for in situ and online high-precision tip clearance measurements of metallic and nonmetallic turbine blades.

  6. Dysregulation of Nutrient Sensing and CLEARance in Presenilin Deficiency.

    PubMed

    Reddy, Kavya; Cusack, Corey L; Nnah, Israel C; Khayati, Khoosheh; Saqcena, Chaitali; Huynh, Tuong B; Noggle, Scott A; Ballabio, Andrea; Dobrowolski, Radek

    2016-03-08

    Attenuated auto-lysosomal system has been associated with Alzheimer disease (AD), yet all underlying molecular mechanisms leading to this impairment are unknown. We show that the amino acid sensing of mechanistic target of rapamycin complex 1 (mTORC1) is dysregulated in cells deficient in presenilin, a protein associated with AD. In these cells, mTORC1 is constitutively tethered to lysosomal membranes, unresponsive to starvation, and inhibitory to TFEB-mediated clearance due to a reduction in Sestrin2 expression. Normalization of Sestrin2 levels through overexpression or elevation of nuclear calcium rescued mTORC1 tethering and initiated clearance. While CLEAR network attenuation in vivo results in buildup of amyloid, phospho-Tau, and neurodegeneration, presenilin-knockout fibroblasts and iPSC-derived AD human neurons fail to effectively initiate autophagy. These results propose an altered mechanism for nutrient sensing in presenilin deficiency and underline an importance of clearance pathways in the onset of AD.

  7. HPT Clearance Control: Intelligent Engine Systems-Phase 1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The following work has been completed to satisfy the Phase I Deliverables for the "HPT Clearance Control" project under NASA GRC's "Intelligent Engine Systems" program: (1) Need for the development of an advanced HPT ACC system has been very clearly laid out, (2) Several existing and potential clearance control systems have been reviewed, (3) A scorecard has been developed to document the system, performance (fuel burn, range, payload, etc.), thermal, and mechanical characteristics of the existing clearance control systems, (4) Engine size and flight cycle selection for the advanced HPT ACC system has been reviewed with "large engine"/"long range mission" combination showing the most benefit, (5) A scoring criteria has been developed to tie together performance parameters for an objective, data driven comparison of competing systems, and (6) The existing HPT ACC systems have been scored based on this scoring system.

  8. Tumor Presence Induces Global Immune Changes and Enhances Nanoparticle Clearance.

    PubMed

    Kai, Marc P; Brighton, Hailey E; Fromen, Catherine A; Shen, Tammy W; Luft, J Christopher; Luft, Yancey E; Keeler, Amanda W; Robbins, Gregory R; Ting, Jenny P Y; Zamboni, William C; Bear, James E; DeSimone, Joseph M

    2016-01-26

    Long-circulating nanoparticles are essential for increasing tumor accumulation to provide therapeutic efficacy. While it is known that tumor presence can alter the immune system, very few studies have explored this impact on nanoparticle circulation. In this report, we demonstrate how the presence of a tumor can change the local and global immune system, which dramatically increases particle clearance. We found that tumor presence significantly increased clearance of PRINT hydrogel nanoparticles from the circulation, resulting in increased accumulation in the liver and spleen, due to an increase in M2-like macrophages. Our findings highlight the need to better understand interactions between immune status and nanoparticle clearance, and suggest that further consideration of immune function is required for success in preclinical and clinical nanoparticle studies.

  9. Improving mucociliary clearance in chronic obstructive pulmonary disease.

    PubMed

    Bhowmik, Angshu; Chahal, Kamaljeet; Austin, Gillian; Chakravorty, Indranil

    2009-04-01

    Patients with COPD usually experience mucus hypersecretion as a result of airway inflammation and response to noxious stimuli. These in turn lead to worsening airway resistance, impaired airflow, increased work of breathing, dyspnoea and exercise intolerance. Mucus hypersecretion may also lead to increased exacerbations and poor health related quality of life (HRQL). Institution based pulmonary rehabilitation programs incorporating airway clearance techniques have been shown to improve HRQL, reduce dyspnoea and improve exercise tolerance but are often difficult to provide due to restricted accessibility and resource implications. This review examines the current evidence base and best clinical practice in the area of airway clearance. Mechanical devices such as the flutter valves, positive end expiratory pressure and high frequency chest wall oscillation (HFCWO) may be able to provide the benefits of improved airway clearance in the patient's home potentially with reduced demands on healthcare resources.

  10. Advances in airway clearance technologies for chronic obstructive pulmonary disease.

    PubMed

    Osadnik, Christian R; McDonald, Christine F; Holland, Anne E

    2013-12-01

    Techniques to promote clearance of sputum from the airways (airway clearance techniques; ACTs) have existed in clinical practice for more than a century. This review examines current evidence and clinical recommendations regarding ACTs for individuals with chronic obstructive pulmonary disease. Comparisons between this literature and reports of current practice suggest that discrepancies may exist in relation to the clinical management of sputum in individuals with COPD. The novel application of newer technologies has enhanced our ability to assess the complex physiological processes underpinning airway clearance therapy. The potential for physiologically tailored ACT prescription may, however, depend on the capacity for translation of such technology from the research setting into the clinical environment. Future directions regarding this common form of therapy will be discussed, including identification of the key research priorities to optimize evidence-based practice in this area.

  11. Acute exposure to acid fog. Effects on mucociliary clearance

    SciTech Connect

    Laube, B.L.; Bowes, S.M. III; Links, J.M.; Thomas, K.K.; Frank, R. )

    1993-05-01

    Submicrometric sulfuric acid (H2SO4) aerosol can affect mucociliary clearance without eliciting irritative symptoms or changes in pulmonary function. The effect of larger fog droplets containing H2SO4 on mucociliary clearance is unknown. We quantified mucociliary clearance from the trachea (n = 4) and small airways (n = 7) of young healthy male adults after an acute exposure to H2SO4 fog (MMAD = 10.3 microns; pH = 2.0; liquid water content = 481 +/- 65 mg/m3; osmolarity = 30 mOsm). Acid fog (AF) or saline fog (SF) (10.9 microns; 492 +/- 116 mg/m3; 30 mOsm) was administered for 40 min of unencumbered breathing (no mouth-piece) at rest and for 20 min of exercise sufficient to produce oronasal breathing. Fog exposures were followed by a methacholine (MCh) challenge (a measure of airway reactivity) or inhalation of technetium-99M radioaerosol (MMAD = 3.4 microns) on 2 study days each. Changes in symptoms and forced ventilatory function were also assessed. Clearance was quantified from computer-assisted analyses of gamma camera images of the lower respiratory tract in terms of %removal/min of the radiolabel from the trachea 25 min after inhalation and from the outer zone of the right lung after 1.9 to 3 h. Symptoms, forced ventilatory function, and MCh response were unaffected by either fog. Tracheal clearance was more rapid in four of four subjects after AF (0.83 +/- 1.58% removal/min) compared with that after SF (-0.54 +/- 0.85% removal/min). Outer zone clearance was more rapid in six of seven subjects after AF (0.22 +/- 0.15% removal/min) compared with that after SF (0.01 +/- 0.09% removal/min).

  12. Acute Mucociliary Clearance Response to Aerobic Exercise in Smokers.

    PubMed

    Ramos, Ercy M C; Vanderlei, Luiz Carlos M; Ito, Juliana T; Lima, Fabiano F; Rodrigues, Fernanda M M; Manzano, Beatriz M; Fernandes, Rômulo A; Cecílio, Michel J; Toledo-Arruda, Alessandra C; Ramos, Dionei

    2015-11-01

    Mucociliary clearance is the main defense mechanism of the respiratory system, and it is influenced by several stimuli, including aerobic exercise and cigarette smoking. We evaluated the acute response of mucociliary clearance to aerobic exercise in smokers and nonsmokers compared with that found after acute smoking and smoking combined with exercise. Also, we investigated whether there was a correlation between mucociliary clearance and the autonomic nervous system under these conditions. Twenty-one smokers were evaluated for mucociliary clearance by saccharin transit time (STT), and the response of the autonomic nervous system was evaluated by heart rate variability after aerobic exercise, after exercise followed by smoking, after acute smoking, and after rest. For comparison, 17 nonsmokers were also assessed during exercise. Repeated-measures analysis of variance with the Tukey test or the Friedman test followed by the Dunn test was used to evaluate the STT, autonomic response, and other variables to exercise and/or smoking in smokers. A paired t test or Wilcoxon test was used to analyze responses to exercise in nonsmokers. Correlations were evaluated using Pearson or Spearman coefficients. The STT was reduced after exercise in both groups, with similar responses between them. Other stimuli also reduced the STT. The STT showed a negative correlation with sympathetic activity in smokers and a positive correlation with the parasympathetic system in nonsmokers. Although impaired in smokers, mucociliary clearance responded to the stimulus of exercise, as demonstrated by similar STTs compared with nonsmokers. This response was correlated with the autonomic nervous system in both groups. In smokers, mucociliary clearance also responded to the stimuli of smoking and exercise followed by smoking. Copyright © 2015 by Daedalus Enterprises.

  13. Determining vancomycin clearance in an overweight and obese population.

    PubMed

    Leong, Julie V B; Boro, Maureen S; Winter, Michaele

    2011-04-01

    Two methods of calculating vancomycin clearance were compared to determine the best body weight measure to use when dosing vancomycin for overweight and obese patients. Hospitalized veterans weighing more than 120% of their ideal body weight (IBW) with serum vancomycin concentrations (SVCs) drawn between January 1, 2003, and June 30, 2005, were eligible for study inclusion. Exclusion criteria included weight of more than 300% the IBW, unstable renal function, dialysis, uncertain vancomycin dosing or sampling times, and distribution-phase sampling. Data from January 1 through December 31, 2003 (phase 1) determined the best-fit weight for vancomycin clearance for the Leonard and Boro method. The bias and precision of the modified Leonard and Boro method using the best-fit weight for vancomycin clearance were then compared with those of the Rushing and Ambrose method for predicting SVCs from January 1, 2004, through June 30, 2005 (phase 2). Forty-eight patients were included in phase 1, with 67 SVCs for analysis. During phase 1, adjusted body weight (ABW), using the Leonard and Boro method, was superior in predicting vancomycin clearance and the resultant SVCs. A total of 96 patients were included in phase 2 of the study, with 160 SVCs for analysis. The modified Leonard and Boro method was significantly more precise than the Rushing and Ambrose method in predicting vancomycin clearance. Use of ABW proved to be superior compared with total body weight when estimating vancomycin clearance in overweight and obese patients. While there was no difference in bias between methods, the modified Leonard and Boro method was significantly more precise than the Rushing and Ambrose method in predicting SVCs when dosing vancomycin for obese patients.

  14. Clearance of the cervical spine in clinically unevaluable trauma patients.

    PubMed

    Halpern, Casey H; Milby, Andrew H; Guo, Wensheng; Schuster, James M; Gracias, Vicente H; Stein, Sherman C

    2010-08-15

    Meta-analytic costeffectiveness analysis. Our goal was to compare the results of different management strategies for trauma patients in whom the cervical spine was not clinically evaluable due to impaired consciousness, endotracheal intubation, or painful distracting injuries. We performed a structured literature review related to cervical spine trauma, radiographic clearance techniques (plain radiography, flexion/extension, CT, and MRI), and complications associated with semirigid collar use. Meta-analytic techniques were used to pool data from multiple sources to calculate pooled mean estimates of sensitivities and specificities of imaging techniques for cervical spinal clearance, rates of complications from various clearance strategies and from empirical use of semirigid collars. A decision analysis model was used to compare outcomes and costs among these strategies. Slightly more than 7.5% of patients who are clinically unevaluable have cervical spine injuries, and 42% of these injuries are associated with spinal instability. Sensitivity of plain radiography or fluoroscopy for spinal clearance was 57% (95% CI: 57%-60%). Sensitivities for CT and MRI alone were 83% (82%-84%) and 87% (84%-89%), respectively. Complications associated with collar use ranged from 1.3% (2 days) to 7.1% (10 days) but were usually minor and short-lived. Quadriplegia resulting from spinal instability missed by a clearance test had enormous impacts on longevity, quality of life, and costs. These impacts overshadowed the effects of prolonged collar application, even when the incidence of quadriplegia was extremely low. As currently used, neuroimaging studies for cervical spinal clearance in clinically unevaluable patients are not cost-effective compared with empirical immobilization in a semirigid collar.

  15. Effects of desipramine on norepinephrine clearance in congestive heart failure

    SciTech Connect

    Clemson, B.; Baily, R.G.; Davis, D.; Zelis, R. )

    1990-08-01

    Elevated plasma norepinephrine (NE) in congestive heart failure (CHF) is caused by increased NE spillover and decreased NE clearance. To evaluate the effects of neuronal uptake blockade on NE clearance, we studied NE kinetics during steady-state infusions of (3H)NE, before and after oral desipramine (DMI, 50 mg) in 11 patients with CHF and 8 normal volunteers. Baseline plasma NE was greater in the CHF group (637 +/- 56 vs. 271 +/- 32 pg/ml; P less than 0.001), NE clearance was lower in CHF (1.31 +/- 0.21 vs. 1.94 +/- 0.17 l.min-1.m-2; P = 0.026), and NE spillover was greater in CHF (4.71 +/- 0.78 vs. 3.04 +/- 0.35 nmol.min-1.m-2, P = 0.054). After DMI, plasma NE rose significantly in CHF (778 +/- 67; P = 0.008), and NE clearance decreased further in CHF (0.97 +/- 0.16; P = 0.024), but neither changed in normal subjects. NE spillover did not change in either group. There appears to be an enhanced effect of DMI on NE clearance in CHF patients. Two general mechanisms may be responsible for this finding, an increased concentration of drug, possibly caused by a decreased volume of distribution, and an increased sensitivity of neuronal amine pumps to DMI. Both mechanisms may reflect a more general abnormality of clearance of drugs and hormones related to abnormalities of tissue perfusion in CHF.

  16. Effect of Internal Clearance on Load Distribution and Life of Radially Loaded Ball and Roller Bearings

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2012-01-01

    The effect of internal clearance on radially loaded deepgroove ball and cylindrical roller bearing load distribution and fatigue life was determined for four clearance groups defined in the bearing standards. The analysis was extended to negative clearance (interference) conditions to produce a curve of life factor versus internal clearance. Rolling-element loads can be optimized and bearing life maximized for a small negative operating clearance. Life declines gradually with positive clearance and rapidly with increasing negative clearance. Relationships were found between bearing life and internal clearance as a function of ball or roller diameter, adjusted for load. Results are presented as life factors for radially loaded bearings independent of bearing size or applied load. In addition, a modified Stribeck Equation is presented that relates the maximum rolling-element load to internal bearing clearance.

  17. Effect of oral N-acetylcysteine on mucus clearance.

    PubMed

    Millar, A B; Pavia, D; Agnew, J E; Lopez-Vidriero, M T; Lauque, D; Clarke, S W

    1985-07-01

    Oral N-acetylcysteine has been advocated as a mucolytic agent for use in chronic bronchitis. We have investigated the effects of regular use of this drug at a dose of 200 mg thrice daily for 4 weeks in nine patients with chronic bronchitis on lung function, lung mucociliary clearance and sputum viscosity in a controlled, double-blind, crossover study. No significant differences were found in lung function, mucociliary clearance curves or sputum viscosity following treatment with N-acetylcysteine compared to control or placebo measurements.

  18. Automated optical assembly

    NASA Astrophysics Data System (ADS)

    Bala, John L.

    1995-08-01

    Automation and polymer science represent fundamental new technologies which can be directed toward realizing the goal of establishing a domestic, world-class, commercial optics business. Use of innovative optical designs using precision polymer optics will enable the US to play a vital role in the next generation of commercial optical products. The increased cost savings inherent in the utilization of optical-grade polymers outweighs almost every advantage of using glass for high volume situations. Optical designers must gain experience with combined refractive/diffractive designs and broaden their knowledge base regarding polymer technology beyond a cursory intellectual exercise. Implementation of a fully automated assembly system, combined with utilization of polymer optics, constitutes the type of integrated manufacturing process which will enable the US to successfully compete with the low-cost labor employed in the Far East, as well as to produce an equivalent product.

  19. Automated macromolecular crystallization screening

    DOEpatents

    Segelke, Brent W.; Rupp, Bernhard; Krupka, Heike I.

    2005-03-01

    An automated macromolecular crystallization screening system wherein a multiplicity of reagent mixes are produced. A multiplicity of analysis plates is produced utilizing the reagent mixes combined with a sample. The analysis plates are incubated to promote growth of crystals. Images of the crystals are made. The images are analyzed with regard to suitability of the crystals for analysis by x-ray crystallography. A design of reagent mixes is produced based upon the expected suitability of the crystals for analysis by x-ray crystallography. A second multiplicity of mixes of the reagent components is produced utilizing the design and a second multiplicity of reagent mixes is used for a second round of automated macromolecular crystallization screening. In one embodiment the multiplicity of reagent mixes are produced by a random selection of reagent components.

  20. The automated command transmission

    NASA Astrophysics Data System (ADS)

    Inoue, Y.; Satoh, S.

    A technique for automated command transmission (ACT) to GEO-stationed satellites is presented. The system is intended for easing the command center workload. The ACT system determines the relation of the commands to on-board units, connects the telemetry with on-board units, defines the control path on the spacecraft, identifies the correspondence of back-up units to primary units, and ascertains sunlight or eclipse conditions. The system also has the address of satellite and command decoders, the ID and content for the mission command sequence, group and inhibit codes, a listing of all available commands, and restricts the data to a command sequence. Telemetry supplies data for automated problem correction. All other missions operations are terminated during system recovery data processing after a crash. The ACT system is intended for use with the GMS spacecraft.

  1. Automated gas chromatography

    DOEpatents

    Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

    1999-07-13

    An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

  2. Automated Pollution Control

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Patterned after the Cassini Resource Exchange (CRE), Sholtz and Associates established the Automated Credit Exchange (ACE), an Internet-based concept that automates the auctioning of "pollution credits" in Southern California. An early challenge of the Jet Propulsion Laboratory's Cassini mission was allocating the spacecraft's resources. To support the decision-making process, the CRE was developed. The system removes the need for the science instrument manager to know the individual instruments' requirements for the spacecraft resources. Instead, by utilizing principles of exchange, the CRE induces the instrument teams to reveal their requirements. In doing so, they arrive at an efficient allocation of spacecraft resources by trading among themselves. A Southern California RECLAIM air pollution credit trading market has been set up using same bartering methods utilized in the Cassini mission in order to help companies keep pollution and costs down.

  3. Automated assembly in space

    NASA Technical Reports Server (NTRS)

    Srivastava, Sandanand; Dwivedi, Suren N.; Soon, Toh Teck; Bandi, Reddy; Banerjee, Soumen; Hughes, Cecilia

    1989-01-01

    The installation of robots and their use of assembly in space will create an exciting and promising future for the U.S. Space Program. The concept of assembly in space is very complicated and error prone and it is not possible unless the various parts and modules are suitably designed for automation. Certain guidelines are developed for part designing and for an easy precision assembly. Major design problems associated with automated assembly are considered and solutions to resolve these problems are evaluated in the guidelines format. Methods for gripping and methods for part feeding are developed with regard to the absence of gravity in space. The guidelines for part orientation, adjustments, compliances and various assembly construction are discussed. Design modifications of various fasteners and fastening methods are also investigated.

  4. Terminal automation system maintenance

    SciTech Connect

    Coffelt, D.; Hewitt, J.

    1997-01-01

    Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

  5. Automated campaign system

    NASA Astrophysics Data System (ADS)

    Vondran, Gary; Chao, Hui; Lin, Xiaofan; Beyer, Dirk; Joshi, Parag; Atkins, Brian; Obrador, Pere

    2006-02-01

    To run a targeted campaign involves coordination and management across numerous organizations and complex process flows. Everything from market analytics on customer databases, acquiring content and images, composing the materials, meeting the sponsoring enterprise brand standards, driving through production and fulfillment, and evaluating results; all processes are currently performed by experienced highly trained staff. Presented is a developed solution that not only brings together technologies that automate each process, but also automates the entire flow so that a novice user could easily run a successful campaign from their desktop. This paper presents the technologies, structure, and process flows used to bring this system together. Highlighted will be how the complexity of running a targeted campaign is hidden from the user through technologies, all while providing the benefits of a professionally managed campaign.

  6. Automated chemiluminescence immunoassay measurements

    NASA Astrophysics Data System (ADS)

    Khalil, Omar S.; Mattingly, G. P.; Genger, K.; Mackowiak, J.; Butler, J.; Pepe, C.; Zurek, T. F.; Abunimeh, N.

    1993-06-01

    Chemiluminescence (CL) detection offers potential for high sensitivity immunoassays (CLIAs). Several approaches were attempted to automate CL measurements. Those include the use of photographic film, clear microtitration plates, and magnetic separation. We describe a photon counting detection apparatus that performs (CLIA) measurements. The CL detector moves toward a disposable reaction vessel to create a light-tight seal and then triggers and integrates a CL signal. The capture uses antibody coated polystyrene microparticles. A porous matrix, which is a part of a disposable reaction tray, entraps the microparticle-captured reaction product. The CL signal emanated off the immune complex immobilized by the porous matrix is detected. The detection system is a part of a fully automated immunoassay analyzer. Methods of achieving high sensitivities are discussed.

  7. Automated Chromosome Breakage Assessment

    NASA Technical Reports Server (NTRS)

    Castleman, Kenneth

    1985-01-01

    An automated karyotyping machine was built at JPL in 1972. It does computerized karyotyping, but it has some hardware limitations. The image processing hardware that was available at a reasonable price in 1972 was marginal, at best, for this job. In the meantime, NASA has developed an interest in longer term spaceflights and an interest in using chromosome breakage studies as a dosimeter for radiation or perhaps other damage that might occur to the tissues. This uses circulating lymphocytes as a physiological dosimeter looking for chromosome breakage on long-term spaceflights. For that reason, we have reactivated the automated karyotyping work at JPL. An update on that work, and a description of where it appears to be headed is presented.

  8. Automated Chromosome Breakage Assessment

    NASA Technical Reports Server (NTRS)

    Castleman, Kenneth

    1985-01-01

    An automated karyotyping machine was built at JPL in 1972. It does computerized karyotyping, but it has some hardware limitations. The image processing hardware that was available at a reasonable price in 1972 was marginal, at best, for this job. In the meantime, NASA has developed an interest in longer term spaceflights and an interest in using chromosome breakage studies as a dosimeter for radiation or perhaps other damage that might occur to the tissues. This uses circulating lymphocytes as a physiological dosimeter looking for chromosome breakage on long-term spaceflights. For that reason, we have reactivated the automated karyotyping work at JPL. An update on that work, and a description of where it appears to be headed is presented.

  9. The automation of science.

    PubMed

    King, Ross D; Rowland, Jem; Oliver, Stephen G; Young, Michael; Aubrey, Wayne; Byrne, Emma; Liakata, Maria; Markham, Magdalena; Pir, Pinar; Soldatova, Larisa N; Sparkes, Andrew; Whelan, Kenneth E; Clare, Amanda

    2009-04-03

    The basis of science is the hypothetico-deductive method and the recording of experiments in sufficient detail to enable reproducibility. We report the development of Robot Scientist "Adam," which advances the automation of both. Adam has autonomously generated functional genomics hypotheses about the yeast Saccharomyces cerevisiae and experimentally tested these hypotheses by using laboratory automation. We have confirmed Adam's conclusions through manual experiments. To describe Adam's research, we have developed an ontology and logical language. The resulting formalization involves over 10,000 different research units in a nested treelike structure, 10 levels deep, that relates the 6.6 million biomass measurements to their logical description. This formalization describes how a machine contributed to scientific knowledge.

  10. Automated Assembly Center (AAC)

    NASA Technical Reports Server (NTRS)

    Stauffer, Robert J.

    1993-01-01

    The objectives of this project are as follows: to integrate advanced assembly and assembly support technology under a comprehensive architecture; to implement automated assembly technologies in the production of high-visibility DOD weapon systems; and to document the improved cost, quality, and lead time. This will enhance the production of DOD weapon systems by utilizing the latest commercially available technologies combined into a flexible system that will be able to readily incorporate new technologies as they emerge. Automated assembly encompasses the following areas: product data, process planning, information management policies and framework, three schema architecture, open systems communications, intelligent robots, flexible multi-ability end effectors, knowledge-based/expert systems, intelligent workstations, intelligent sensor systems, and PDES/PDDI data standards.

  11. Power subsystem automation study

    NASA Technical Reports Server (NTRS)

    Tietz, J. C.; Sewy, D.; Pickering, C.; Sauers, R.

    1984-01-01

    The purpose of the phase 2 of the power subsystem automation study was to demonstrate the feasibility of using computer software to manage an aspect of the electrical power subsystem on a space station. The state of the art in expert systems software was investigated in this study. This effort resulted in the demonstration of prototype expert system software for managing one aspect of a simulated space station power subsystem.

  12. Automated Microbial Metabolism Laboratory

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Development of the automated microbial metabolism laboratory (AMML) concept is reported. The focus of effort of AMML was on the advanced labeled release experiment. Labeled substrates, inhibitors, and temperatures were investigated to establish a comparative biochemical profile. Profiles at three time intervals on soil and pure cultures of bacteria isolated from soil were prepared to establish a complete library. The development of a strategy for the return of a soil sample from Mars is also reported.

  13. Automated RTOP Management System

    NASA Technical Reports Server (NTRS)

    Hayes, P.

    1984-01-01

    The structure of NASA's Office of Aeronautics and Space Technology electronic information system network from 1983 to 1985 is illustrated. The RTOP automated system takes advantage of existing hardware, software, and expertise, and provides: (1) computerized cover sheet and resources forms; (2) electronic signature and transmission; (3) a data-based information system; (4) graphics; (5) intercenter communications; (6) management information; and (7) text editing. The system is coordinated with Headquarters efforts in codes R,E, and T.

  14. Automated RSO Stability Analysis

    NASA Astrophysics Data System (ADS)

    Johnson, T.

    2016-09-01

    A methodology for assessing the attitude stability of a Resident Space Object (RSO) using visual magnitude data is presented and then scaled to run in an automated fashion across the entire satellite catalog. Results obtained by applying the methodology to the Commercial Space Operations Center (COMSpOC) catalog are presented and summarized, identifying objects that have changed stability. We also examine the timeline for detecting the transition from stable to unstable attitude

  15. Automated Nitrocellulose Analysis

    DTIC Science & Technology

    1978-12-01

    is acceptable. (4) As would be expected from the theory of osmosis , a high saline content in the dialysis recipient stream (countersolution) is of...Block 39, II different from Report; IS. SUPPLEMENTARY NOTES IS. KEY WOROS (Continue on rereri Analysis Automated analysis Dialysis Glyceryl...Technicon AutoAnalyzer, involves aspiration of a stirred nitrocellulose suspension, dialysis against 9 percent saline, and hydrolysis with 5N sodium

  16. Cavendish Balance Automation

    NASA Technical Reports Server (NTRS)

    Thompson, Bryan

    2000-01-01

    This is the final report for a project carried out to modify a manual commercial Cavendish Balance for automated use in cryostat. The scope of this project was to modify an off-the-shelf manually operated Cavendish Balance to allow for automated operation for periods of hours or days in cryostat. The purpose of this modification was to allow the balance to be used in the study of effects of superconducting materials on the local gravitational field strength to determine if the strength of gravitational fields can be reduced. A Cavendish Balance was chosen because it is a fairly simple piece of equipment for measuring gravity, one the least accurately known and least understood physical constants. The principle activities that occurred under this purchase order were: (1) All the components necessary to hold and automate the Cavendish Balance in a cryostat were designed. Engineering drawings were made of custom parts to be fabricated, other off-the-shelf parts were procured; (2) Software was written in LabView to control the automation process via a stepper motor controller and stepper motor, and to collect data from the balance during testing; (3)Software was written to take the data collected from the Cavendish Balance and reduce it to give a value for the gravitational constant; (4) The components of the system were assembled and fitted to a cryostat. Also the LabView hardware including the control computer, stepper motor driver, data collection boards, and necessary cabling were assembled; and (5) The system was operated for a number of periods, data collected, and reduced to give an average value for the gravitational constant.

  17. Automated Cooperative Trajectories

    NASA Technical Reports Server (NTRS)

    Hanson, Curt; Pahle, Joseph; Brown, Nelson

    2015-01-01

    This presentation is an overview of the Automated Cooperative Trajectories project. An introduction to the phenomena of wake vortices is given, along with a summary of past research into the possibility of extracting energy from the wake by flying close parallel trajectories. Challenges and barriers to adoption of civilian automatic wake surfing technology are identified. A hardware-in-the-loop simulation is described that will support future research. Finally, a roadmap for future research and technology transition is proposed.

  18. Automation in biological crystallization.

    PubMed

    Stewart, Patrick Shaw; Mueller-Dieckmann, Jochen

    2014-06-01

    Crystallization remains the bottleneck in the crystallographic process leading from a gene to a three-dimensional model of the encoded protein or RNA. Automation of the individual steps of a crystallization experiment, from the preparation of crystallization cocktails for initial or optimization screens to the imaging of the experiments, has been the response to address this issue. Today, large high-throughput crystallization facilities, many of them open to the general user community, are capable of setting up thousands of crystallization trials per day. It is thus possible to test multiple constructs of each target for their ability to form crystals on a production-line basis. This has improved success rates and made crystallization much more convenient. High-throughput crystallization, however, cannot relieve users of the task of producing samples of high quality. Moreover, the time gained from eliminating manual preparations must now be invested in the careful evaluation of the increased number of experiments. The latter requires a sophisticated data and laboratory information-management system. A review of the current state of automation at the individual steps of crystallization with specific attention to the automation of optimization is given.

  19. Automation in biological crystallization

    PubMed Central

    Shaw Stewart, Patrick; Mueller-Dieckmann, Jochen

    2014-01-01

    Crystallization remains the bottleneck in the crystallographic process leading from a gene to a three-dimensional model of the encoded protein or RNA. Automation of the individual steps of a crystallization experiment, from the preparation of crystallization cocktails for initial or optimization screens to the imaging of the experiments, has been the response to address this issue. Today, large high-throughput crystallization facilities, many of them open to the general user community, are capable of setting up thousands of crystallization trials per day. It is thus possible to test multiple constructs of each target for their ability to form crystals on a production-line basis. This has improved success rates and made crystallization much more convenient. High-throughput crystallization, however, cannot relieve users of the task of producing samples of high quality. Moreover, the time gained from eliminating manual preparations must now be invested in the careful evaluation of the increased number of experiments. The latter requires a sophisticated data and laboratory information-management system. A review of the current state of automation at the individual steps of crystallization with specific attention to the automation of optimization is given. PMID:24915074

  20. Autonomy, Automation, and Systems

    NASA Astrophysics Data System (ADS)

    Turner, Philip R.

    1987-02-01

    Aerospace industry interest in autonomy and automation, given fresh impetus by the national goal of establishing a Space Station, is becoming a major item of research and technology development. The promise of new technology arising from research in Artificial Intelligence (AI) has focused much attention on its potential in autonomy and automation. These technologies can improve performance in autonomous control functions that involve planning, scheduling, and fault diagnosis of complex systems. There are, however, many aspects of system and subsystem design in an autonomous system that impact AI applications, but do not directly involve AI technology. Development of a system control architecture, establishment of an operating system within the design, providing command and sensory data collection features appropriate to automated operation, and the use of design analysis tools to support system engineering are specific examples of major design issues. Aspects such as these must also receive attention and technology development support if we are to implement complex autonomous systems within the realistic limitations of mass, power, cost, and available flight-qualified technology that are all-important to a flight project.

  1. Automating existing stations

    SciTech Connect

    Little, J.E.

    1986-09-01

    The task was to automate 20 major compressor stations along ANR Pipeline Co.'s Southeastern and Southwestern pipelines in as many months. Meeting this schedule required standardized hardware and software design. Working with Bristol Babcock Co., ANR came up with an off-the-shelf station automation package suitable for a variety of compressor stations. The project involved 148 engines with 488,880-hp in the 20 stations. ANR Pipeline developed software for these engines and compressors, including horsepower prediction and efficiency. The system places processors ''intelligence'' at each station and engine to monitor and control operations. The station processor receives commands from the company's gas dispatch center at Detroit and informs dispatchers of alarms, conditions, and decision it makes. The automation system is controlled by the Detroit center through a central communications network. Operating orders from the center are sent to the station processor, which obeys orders using the most efficient means of operation at the station's disposal. In a malfunction, a control and communications backup system takes over. Commands and information are directly transmitted between the center and the individual compressor stations. Stations receive their orders based on throughput, with suction and discharge pressure overrides. Additionally, a discharge temperature override protects pipeline coatings.

  2. Automation of optical tweezers

    NASA Astrophysics Data System (ADS)

    Hsieh, Tseng-Ming; Chang, Bo-Jui; Hsu, Long

    2000-07-01

    Optical tweezers is a newly developed instrument, which makes possible the manipulation of micro-optical particles under a microscope. In this paper, we present the automation of an optical tweezers which consists of a modified optical tweezers, equipped with two motorized actuators to deflect a 1 W argon laser beam, and a computer control system including a joystick. The trapping of a single bead and a group of lactoacidofilus was shown, separately. With the aid of the joystick and two auxiliary cursers superimposed on the real-time image of a trapped bead, we demonstrated the simple and convenient operation of the automated optical tweezers. By steering the joystick and then pressing a button on it, we assign a new location for the trapped bead to move to. The increment of the motion 0.04 (mu) m for a 20X objective, is negligible. With a fast computer for image processing, the manipulation of the trapped bead is smooth and accurate. The automation of the optical tweezers is also programmable. This technique may be applied to accelerate the DNA hybridization in a gene chip. The combination of the modified optical tweezers with the computer control system provides a tool for precise manipulation of micro particles in many scientific fields.

  3. Effect of atropine on oral clearance of a radiolabeled sulfur colloid

    SciTech Connect

    LaForce, F.M.; Thompson, B.; Trow, R.

    1984-11-01

    Physical clearance is an important oral defense mechanism against gram-negative rods. The authors describe a simple technique that uses commercially available technetium-99m sulfur colloid to measure oral clearance. Technetium-99m sulfur colloid was sprayed into the mouth, and clearance was measured as the percent decrease in radiolabel counts over 2 hours using a radioisotope camera. Results using this technique compared favorably with clearance data using Tc-99m radiolabeled Escherichia coli. Atropine significantly decreased oral clearance rates of the colloid. Decreased clearance may be an important risk factor in the development of gram-negative rod colonization in hospitalized patients. 15 references, 3 figures.

  4. Mannitol clearance for the determination of glomerular filtration rate-a validation against clearance of (51) Cr-EDTA.

    PubMed

    Kiss, Katalin; Molnár, Miklós; Söndergaard, Sören; Molnár, Gyula; Ricksten, Sven-Erik

    2016-06-03

    We studied the agreement between plasma clearance of mannitol and the reference method, plasma clearance of (51) Cr-EDTA in outpatients with normal to moderately impaired renal function. Forty-one patients with a serum creatinine <200 μmol l(-1) entered the study. (51) Cr-EDTA clearance was measured with the standard bolus injection technique and glomerular filtration rate (GFR) was calculated by the single-sample method described by Jacobsson. Mannitol, 0·25 g kg(-1) body weight (150 mg ml(-1) ), was infused for 4-14 min and blood samples taken at 1-, 2-, 3- and 4-h (n = 24) or 2-, 3-, 3·5- and 4-h after infusion (n = 17). Mannitol in serum was measured by an enzymatic method. Plasma clearance for mannitol and its apparent volume of distribution (Vd) were calculated according to Brøchner-Mortensen. Mean plasma clearance (±SD) for (51) Cr-EDTA was 59·7 ± 18·8 ml min(-1) . The mean plasma clearance for mannitol ranged between 57·0 ± 20·1 and 61·1 ± 16·7 ml min(-1) and Vd was 21·3 ± 6·2% per kg b.w. The between-method bias ranged between -0·23 and 2·73 ml min(-1) , the percentage error between 26·7 and 39·5% and the limits of agreement between -14·3/17·2 and -25·3/19·9 ml min(-1) . The best agreement was seen when three- or four-sample measurements of plasma mannitol were obtained and when sampling started 60 min after injection. Furthermore, accuracy of plasma clearance determinations was 88-96% (P30) and 41-63% (P10) and was highest when three- or four-sample measurements of plasma mannitol were obtained, including the first hour after the bolus dose. We conclude that there is a good agreement between plasma clearances of mannitol and (51) Cr-EDTA for the assessment of GFR.

  5. AUTOMATED INADVERTENT INTRUDER APPLICATION

    SciTech Connect

    Koffman, L; Patricia Lee, P; Jim Cook, J; Elmer Wilhite, E

    2007-05-29

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

  6. Seal Investigations of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Taylor, Shawn; Oswald, Jay; DeCastro, Jonathan A.

    2006-01-01

    In an effort to improve upon current thermal active clearance control methods, a first generation, fast-acting mechanically actuated, active clearance control system has been designed and installed into a non-rotating test rig. In order to harvest the benefit of tighter blade tip clearances, low-leakage seals are required for the actuated carrier segments of the seal shroud to prevent excessive leakage of compressor discharge (P3) cooling air. The test rig was designed and fabricated to facilitate the evaluation of these types of seals, identify seal leakage sources, and test other active clearance control system concepts. The objective of this paper is to present both experimental and analytical investigations into the nature of the face-seal to seal-carrier interface. Finite element analyses were used to examine face seal contact pressures and edge-loading under multiple loading conditions, varied E-seal positions and two new face seal heights. The analyses indicated that moving the E-seal inward radially and reducing face seal height would lead to more uniform contact conditions between the face seal and the carriers. Lab testing confirmed that moving the balance diameter inward radially caused a decrease in overall system leakage.

  7. Celllular Uptake and Clearance of TIO2 Nanoparticles

    EPA Science Inventory

    Differential rates of cellular uptake and clearance of engineered nanomaterials may influence the propensity for tissue accumulation under chronic exposure conditions. A retinal pigment epithelial cell line (ARPE-19) was used to investigate 1) if Ti02 (Degussa, P25) nanoparticles...

  8. Modifications of lung clearance mechanisms by acute influenza A infection

    SciTech Connect

    Levandowski, R.A.; Gerrity, T.R.; Garrard, C.S.

    1985-10-01

    Four volunteers with naturally acquired, culture-proved influenza A infection inhaled a radiolabeled aerosol to permit investigation of lung mucociliary clearance mechanisms during and after symptomatic illness. Mucus transport in the trachea was undetectable when monitored with an external multidetector probe within 48 hours of the onset of the illness, but was found at a normal velocity by 1 week in three of the four subjects. In two volunteers who coughed 23 to 48 times during the 4.5-hour observation period, whole lung clearance was as fast within the first 48 hours of illness as during health 3 months later in spite of the absence of measurable tracheal mucus transport. Conversely, in spite of the return 1 week later of mucus transport at velocities expected in the trachea, whole lung clearance for the 4.5-hour period was slowed in two volunteers who coughed less than once an hour. The data offer evidence that cough is important in maintaining lung clearance for at least several days after symptomatic influenza A infection when other mechanisms that depend on ciliary function are severely deficient.

  9. 19 CFR 122.158 - Other entry and clearance requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Other entry and clearance requirements. 122.158 Section 122.158 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.158 Other entry and...

  10. 19 CFR 122.158 - Other entry and clearance requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Other entry and clearance requirements. 122.158 Section 122.158 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.158 Other entry and...

  11. 19 CFR 122.158 - Other entry and clearance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Other entry and clearance requirements. 122.158 Section 122.158 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.158 Other entry and...

  12. 19 CFR 122.157 - Documents required for clearance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

  13. 19 CFR 122.158 - Other entry and clearance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Other entry and clearance requirements. 122.158 Section 122.158 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.158 Other entry and...

  14. 19 CFR 122.158 - Other entry and clearance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Other entry and clearance requirements. 122.158 Section 122.158 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.158 Other entry and...

  15. 19 CFR 122.157 - Documents required for clearance.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

  16. 19 CFR 122.157 - Documents required for clearance.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

  17. 19 CFR 122.157 - Documents required for clearance.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

  18. 19 CFR 122.157 - Documents required for clearance.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

  19. [Airway clearance techniques in chronic obstructive pulmonary syndrome : 2011 update].

    PubMed

    Opdekamp, C

    2011-09-01

    For many years the airway clearance techniques used in chest physical therapy were assimilated with the singular technique of postural drainage, percussions and vibrations. However the side effects and counter indications and the lack of scientific proof regarding this technique have forced reflection and development of other techniques more comfortable and without deleterious effects. If all these techniques show a high efficiency in terms of improved mucociliary clearance, the literature is unanimous on how little effect these techniques have in the short and the long-term with regards to lung function and arterial blood gases. In view of the scientific literature, it is clear that the airway clearance techniques don't have the same recognition concerning their efficiency in all obstructive pulmonary diseases. As the cornerstone in the management of cystic fibrosis, the efficiency of the bronchial hygiene techniques are in general poorly documented in the management of the non-cystic fibrosis bronchiectasis, bronchitis or emphysema. The use of the chest physical therapy seems more to do with the interpretation of the imagery and symptomatology. The airway clearance techniques should be individualised according to symptoms, the amount of expectorated mucus and the objectives signs of secretions retention or subjective signs of difficulty expectorating secretions with progression of the disease.

  20. 50 CFR 14.52 - Clearance of imported wildlife.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Clearance of imported wildlife. 14.52 Section 14.52 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND...

  1. 48 CFR 2452.237-75 - Clearance of contractor personnel.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... URBAN DEVELOPMENT CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and... clause in solicitations and contracts. Clearance of Contractor Personnel (OCT 1999) (a) General. This contract requires contractor employees to work in, and have access to, a HUD facility. All such...

  2. Celllular Uptake and Clearance of TIO2 Nanoparticles

    EPA Science Inventory

    Differential rates of cellular uptake and clearance of engineered nanomaterials may influence the propensity for tissue accumulation under chronic exposure conditions. A retinal pigment epithelial cell line (ARPE-19) was used to investigate 1) if Ti02 (Degussa, P25) nanoparticles...

  3. 10 CFR 95.17 - Processing facility clearance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... related classified information, or process the facility for a facility clearance. Processing will include... concerning the foreign intelligence threat, risk of unauthorized technology transfer, type and sensitivity of... acceptable security review conducted by the NRC; (3) Submitting key management personnel for...

  4. 23 CFR Appendix B to Part 1327 - OMB Clearance

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false OMB Clearance B Appendix B to Part 1327 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR PARTICIPATING IN AND RECEIVING INFORMATION FROM THE NATIONAL DRIVER REGISTER PROBLEM DRIVER POINTER SYSTEM Pt....

  5. 23 CFR Appendix B to Part 1327 - OMB Clearance

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false OMB Clearance B Appendix B to Part 1327 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR PARTICIPATING IN AND RECEIVING INFORMATION FROM THE NATIONAL DRIVER REGISTER PROBLEM DRIVER POINTER SYSTEM Pt....

  6. 23 CFR Appendix B to Part 1327 - OMB Clearance

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false OMB Clearance B Appendix B to Part 1327 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR PARTICIPATING IN AND RECEIVING INFORMATION FROM THE NATIONAL DRIVER REGISTER PROBLEM DRIVER POINTER SYSTEM Pt....

  7. 23 CFR Appendix B to Part 1327 - OMB Clearance

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false OMB Clearance B Appendix B to Part 1327 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR PARTICIPATING IN AND RECEIVING INFORMATION FROM THE NATIONAL DRIVER REGISTER PROBLEM DRIVER POINTER SYSTEM Pt....

  8. 23 CFR Appendix B to Part 1327 - OMB Clearance

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false OMB Clearance B Appendix B to Part 1327 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR PARTICIPATING IN AND RECEIVING INFORMATION FROM THE NATIONAL DRIVER REGISTER PROBLEM DRIVER POINTER SYSTEM Pt....

  9. 49 CFR Appendix F to Part 512 - OMB Clearance

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false OMB Clearance F Appendix F to Part 512 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONFIDENTIAL BUSINESS INFORMATION Pt. 512, App. F Appendix F to...

  10. 49 CFR Appendix F to Part 512 - OMB Clearance

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false OMB Clearance F Appendix F to Part 512 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONFIDENTIAL BUSINESS INFORMATION Pt. 512, App. F Appendix F to...

  11. 50 CFR 14.52 - Clearance of imported wildlife.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 1 2013-10-01 2013-10-01 false Clearance of imported wildlife. 14.52 Section 14.52 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE...

  12. 50 CFR 14.52 - Clearance of imported wildlife.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 1 2012-10-01 2012-10-01 false Clearance of imported wildlife. 14.52 Section 14.52 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE...

  13. 50 CFR 14.52 - Clearance of imported wildlife.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 1 2011-10-01 2011-10-01 false Clearance of imported wildlife. 14.52 Section 14.52 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE...

  14. 50 CFR 14.52 - Clearance of imported wildlife.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 1 2014-10-01 2014-10-01 false Clearance of imported wildlife. 14.52 Section 14.52 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE...

  15. 33 CFR 118.160 - Vertical clearance gauges.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.160 Vertical clearance gauges. (a) When necessary for... distance between “low steel” of the bridge channel span and the level of the water, measured to the bottom... by the District Commander if particular conditions or circumstances warrant. (c) Construction. Each...

  16. Determinant factor for clearance of ceramic fibres from rat lungs.

    PubMed Central

    Yamato, H; Tanaka, I; Higashi, T; Kido, M

    1992-01-01

    Deposition, clearance, retention, and durability of inhaled particles from lungs are known to be important factors for induction of pulmonary fibrosis or lung cancer. To study the deposition and clearance of alumina silicate ceramic fibres from the lung, male Wistar rats were exposed to ceramic fibre particles with a mass median aerodynamic diameter (MMAD) of 4.2 micron, for six hours a day, five days a week for two weeks. The average exposure concentration was 20.7 (standard deviation (SD) 4.5) mg/m3. The rats were killed at one day, three months, and six months after the end of exposure, and the fibre numbers and dimensions were measured with a scanning electron microscope. No significant differences in number and geometric mean length of residual ceramic fibres in the lungs were found between the groups. The geometric mean diameter, however, decreased according to the duration of the clearance period. These findings suggest that solubility of fibre contributes most in the clearance of the inhaled ceramic fibres from the lungs. PMID:1554614

  17. Determinant factor for clearance of ceramic fibres from rat lungs.

    PubMed

    Yamato, H; Tanaka, I; Higashi, T; Kido, M

    1992-03-01

    Deposition, clearance, retention, and durability of inhaled particles from lungs are known to be important factors for induction of pulmonary fibrosis or lung cancer. To study the deposition and clearance of alumina silicate ceramic fibres from the lung, male Wistar rats were exposed to ceramic fibre particles with a mass median aerodynamic diameter (MMAD) of 4.2 micron, for six hours a day, five days a week for two weeks. The average exposure concentration was 20.7 (standard deviation (SD) 4.5) mg/m3. The rats were killed at one day, three months, and six months after the end of exposure, and the fibre numbers and dimensions were measured with a scanning electron microscope. No significant differences in number and geometric mean length of residual ceramic fibres in the lungs were found between the groups. The geometric mean diameter, however, decreased according to the duration of the clearance period. These findings suggest that solubility of fibre contributes most in the clearance of the inhaled ceramic fibres from the lungs.

  18. 31 CFR 205.20 - What is a clearance pattern?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false What is a clearance pattern? 205.20 Section 205.20 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE RULES AND PROCEDURES FOR EFFICIENT FEDERAL-STATE FUNDS TRANSFERS Rules...

  19. 46 CFR 61.20-23 - Tailshaft clearance; bearing weardown.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tailshaft clearance; bearing weardown. 61.20-23 Section...; bearing weardown. (a) Water lubricated bearings, other than rubber, must be rebushed as follows: (1) Where the propelling machinery is located amidship, the after stern tube bearing must be rebushed when it is...

  20. 33 CFR 118.160 - Vertical clearance gauges.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... numerals and foot marks below “low steel” of the bridge whenever the gauge is repainted or the structure is... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.160 Vertical clearance gauges. (a) When necessary for... distance between “low steel” of the bridge channel span (in the closed to navigation position...