A community health report card: comprehensive assessment for tracking community health (CATCH).

PubMed

Studnicki, J; Steverson, B; Myers, B; Hevner, A R; Berndt, D J

1997-01-01

A systematic method for assessing the health status of communities has been under development at the University of South Florida since 1991. The system, known as CATCH, draws 226 indicators from multiple sources and uses an innovative comparative framework and weighted evaluation criteria to produce a rank-ordered community problem list. The CATCH results from II Floridian counties have focused attention on high priority health problems and provided a framework for measuring the impact of health expenditures on community health status outcomes. The method and plans to create an automated data warehouse to support its expansion and enrichment are described.

Technological advances for studying human behavior

NASA Technical Reports Server (NTRS)

Roske-Hofstrand, Renate J.

1990-01-01

Technological advances for studying human behavior are noted in viewgraph form. It is asserted that performance-aiding systems are proliferating without a fundamental understanding of how they would interact with the humans who must control them. Two views of automation research, the hardware view and the human-centered view, are listed. Other viewgraphs give information on vital elements for human-centered research, a continuum of the research process, available technologies, new technologies for persistent problems, a sample research infrastructure, the need for metrics, and examples of data-link technology.

Automation in College Libraries.

ERIC Educational Resources Information Center

Werking, Richard Hume

1991-01-01

Reports the results of a survey of the "Bowdoin List" group of liberal arts colleges. The survey obtained information about (1) automation modules in place and when they had been installed; (2) financing of automation and its impacts on the library budgets; and (3) library director's views on library automation and the nature of the…

Automation and robotics for the Space Station - An ATAC perspective

NASA Technical Reports Server (NTRS)

Nunamaker, Robert R.

1989-01-01

The study of automation and robotics for the Space Station by the Advanced Technology Advisory Committee is surveyed. The formation of the committee and the methodology for the Space Station automation study are discussed. The committee's recommendations for automation and robotics research and development are listed.

The Automated Office.

ERIC Educational Resources Information Center

Naclerio, Nick

1979-01-01

Clerical personnel may be able to climb career ladders as a result of office automation and expanded job opportunities in the word processing area. Suggests opportunities in an automated office system and lists books and periodicals on word processing for counselors and teachers. (MF)

Peak picking multidimensional NMR spectra with the contour geometry based algorithm CYPICK.

PubMed

Würz, Julia M; Güntert, Peter

2017-01-01

The automated identification of signals in multidimensional NMR spectra is a challenging task, complicated by signal overlap, noise, and spectral artifacts, for which no universally accepted method is available. Here, we present a new peak picking algorithm, CYPICK, that follows, as far as possible, the manual approach taken by a spectroscopist who analyzes peak patterns in contour plots of the spectrum, but is fully automated. Human visual inspection is replaced by the evaluation of geometric criteria applied to contour lines, such as local extremality, approximate circularity (after appropriate scaling of the spectrum axes), and convexity. The performance of CYPICK was evaluated for a variety of spectra from different proteins by systematic comparison with peak lists obtained by other, manual or automated, peak picking methods, as well as by analyzing the results of automated chemical shift assignment and structure calculation based on input peak lists from CYPICK. The results show that CYPICK yielded peak lists that compare in most cases favorably to those obtained by other automated peak pickers with respect to the criteria of finding a maximal number of real signals, a minimal number of artifact peaks, and maximal correctness of the chemical shift assignments and the three-dimensional structure obtained by fully automated assignment and structure calculation.

Computer Science and Technology Publications. NBS Publications List 84.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Computer Sciences and Technology.

This bibliography lists publications of the Institute for Computer Sciences and Technology of the National Bureau of Standards. Publications are listed by subject in the areas of computer security, computer networking, and automation technology. Sections list publications of: (1) current Federal Information Processing Standards; (2) computer…

Instrumentation and Automation of Wastewater Collection and Treatment Systems.

ERIC Educational Resources Information Center

Roesler, Joseph F.; Cummins, Michael D.

1978-01-01

Presents a literature review of the use of instrumentation and automation of wastewater treatment systems, covering publications of 1976-77. This review includes automatic control systems and cost effectiveness of automation of wastewater treatment. A list of 115 references is also presented. (HM)

Proceedings of the Sixth NASA Langley Formal Methods (LFM) Workshop

NASA Technical Reports Server (NTRS)

Rozier, Kristin Yvonne (Editor)

2008-01-01

Today's verification techniques are hard-pressed to scale with the ever-increasing complexity of safety critical systems. Within the field of aeronautics alone, we find the need for verification of algorithms for separation assurance, air traffic control, auto-pilot, Unmanned Aerial Vehicles (UAVs), adaptive avionics, automated decision authority, and much more. Recent advances in formal methods have made verifying more of these problems realistic. Thus we need to continually re-assess what we can solve now and identify the next barriers to overcome. Only through an exchange of ideas between theoreticians and practitioners from academia to industry can we extend formal methods for the verification of ever more challenging problem domains. This volume contains the extended abstracts of the talks presented at LFM 2008: The Sixth NASA Langley Formal Methods Workshop held on April 30 - May 2, 2008 in Newport News, Virginia, USA. The topics of interest that were listed in the call for abstracts were: advances in formal verification techniques; formal models of distributed computing; planning and scheduling; automated air traffic management; fault tolerance; hybrid systems/hybrid automata; embedded systems; safety critical applications; safety cases; accident/safety analysis.

Directory of Design Support Methods

DTIC Science & Technology

2005-08-01

16 ATB3I 18 Auditory Hazard Assessment Algorithm (AHAAH) 20 Authoring Instructional Materials (AIM) 22 Automated Neuropsychological Assessment...How To Acquire: Point of Contact listed above. 23 Title: Automated Neuropsychological Assessment Metrics (ANAM) Overall Category: Tool...General Overview: The Automated Neuropsychological Assessment Metrics (ANAM) is designed with emphasis on

Topics in Chemical Instrumentation: Robots in the Laboratory--An Overview.

ERIC Educational Resources Information Center

Strimaitis, Janet R.

1989-01-01

Describes the current use of automation in the laboratory. Discusses the need, flexibility, and benefits of automation. Presents a generic system description. Lists commercially available laboratory robots. (MVL)

Automated Classification of Asteroids into Families at Work

NASA Astrophysics Data System (ADS)

Knežević, Zoran; Milani, Andrea; Cellino, Alberto; Novaković, Bojan; Spoto, Federica; Paolicchi, Paolo

2014-07-01

We have recently proposed a new approach to the asteroid family classification by combining the classical HCM method with an automated procedure to add newly discovered members to existing families. This approach is specifically intended to cope with ever increasing asteroid data sets, and consists of several steps to segment the problem and handle the very large amount of data in an efficient and accurate manner. We briefly present all these steps and show the results from three subsequent updates making use of only the automated step of attributing the newly numbered asteroids to the known families. We describe the changes of the individual families membership, as well as the evolution of the classification due to the newly added intersections between the families, resolved candidate family mergers, and emergence of the new candidates for the mergers. We thus demonstrate how by the new approach the asteroid family classification becomes stable in general terms (converging towards a permanent list of confirmed families), and in the same time evolving in details (to account for the newly discovered asteroids) at each update.

Cockpit avionics integration and automation

NASA Technical Reports Server (NTRS)

Pischke, Keith M.

1990-01-01

Information on cockpit avionics integration and automation is given in viewgraph form, with a number of photographs. The benefits of cockpit integration are listed. The MD-11 flight guidance/flight deck system is illustrated.

Space Station Initial Operational Concept (IOC) operations and safety view - Automation and robotics for Space Station

NASA Technical Reports Server (NTRS)

Bates, William V., Jr.

1989-01-01

The automation and robotics requirements for the Space Station Initial Operational Concept (IOC) are discussed. The amount of tasks to be performed by an eight-person crew, the need for an automated or directed fault analysis capability, and ground support requirements are considered. Issues important in determining the role of automation for the IOC are listed.

NMRNet: A deep learning approach to automated peak picking of protein NMR spectra.

PubMed

Klukowski, Piotr; Augoff, Michal; Zieba, Maciej; Drwal, Maciej; Gonczarek, Adam; Walczak, Michal J

2018-03-14

Automated selection of signals in protein NMR spectra, known as peak picking, has been studied for over 20 years, nevertheless existing peak picking methods are still largely deficient. Accurate and precise automated peak picking would accelerate the structure calculation, and analysis of dynamics and interactions of macromolecules. Recent advancement in handling big data, together with an outburst of machine learning techniques, offer an opportunity to tackle the peak picking problem substantially faster than manual picking and on par with human accuracy. In particular, deep learning has proven to systematically achieve human-level performance in various recognition tasks, and thus emerges as an ideal tool to address automated identification of NMR signals. We have applied a convolutional neural network for visual analysis of multidimensional NMR spectra. A comprehensive test on 31 manually-annotated spectra has demonstrated top-tier average precision (AP) of 0.9596, 0.9058 and 0.8271 for backbone, side-chain and NOESY spectra, respectively. Furthermore, a combination of extracted peak lists with automated assignment routine, FLYA, outperformed other methods, including the manual one, and led to correct resonance assignment at the levels of 90.40%, 89.90% and 90.20% for three benchmark proteins. The proposed model is a part of a Dumpling software (platform for protein NMR data analysis), and is available at https://dumpling.bio/. michaljerzywalczak@gmail.compiotr.klukowski@pwr.edu.pl. Supplementary data are available at Bioinformatics online.

ADS: A FORTRAN program for automated design synthesis: Version 1.10

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1985-01-01

A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis - Version 1.10) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels: strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples, and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired.

Robots in the Library: Automated Storage and Retrieval Systems.

ERIC Educational Resources Information Center

Kountz, John

1987-01-01

Describes automated storage and retrieval (AS/R) techniques and discusses benefits, conservation considerations, and costs of the AS/R approach to the storage of library books. Thirteen annotated references are listed. (MES)

Evaluation of Human and AutomationRobotics Integration Needs for Future Human Exploration Missions

NASA Technical Reports Server (NTRS)

Marquez, Jessica J.; Adelstein, Bernard D.; Ellis, Stephen; Chang, Mai Lee; Howard, Robert

2016-01-01

NASA employs Design Reference Missions (DRMs) to define potential architectures for future human exploration missions to deep space, the Moon, and Mars. While DRMs to these destinations share some components, each mission has different needs. This paper focuses on the human and automation/robotic integration needs for these future missions, evaluating them with respect to NASA research gaps in the area of space human factors engineering. The outcomes of our assessment is a human and automation/robotic (HAR) task list for each of the four DRMs that we reviewed (i.e., Deep Space Sortie, Lunar Visit/Habitation, Deep Space Habitation, and Planetary), a list of common critical HAR factors that drive HAR design.

Understanding and avoiding potential problems in implementing automation

NASA Astrophysics Data System (ADS)

Rouse, W. B.; Morris, N. M.

1985-11-01

Technology-driven efforts to implement automation often encounter problems due to lack of acceptance or begrudging acceptance by the personnel involved. It is argued in this paper that the level of automation perceived by an individual heavily influences whether or not the automation is accepted by that individual. The factors that appear to affect perceived level of automation are discussed. Issues considered include the impact of automation on the system and the individual, correlates of acceptance, problems and risks of automation, and factors influencing alienation. Based on an understanding of these issues, a set of eight guidelines is proposed as a possible means of avoiding problems in implementing automation.

Understanding and avoiding potential problems in implementing automation

NASA Technical Reports Server (NTRS)

Rouse, W. B.; Morris, N. M.

1985-01-01

Technology-driven efforts to implement automation often encounter problems due to lack of acceptance or begrudging acceptance by the personnel involved. It is argued in this paper that the level of automation perceived by an individual heavily influences whether or not the automation is accepted by that individual. The factors that appear to affect perceived level of automation are discussed. Issues considered include the impact of automation on the system and the individual, correlates of acceptance, problems and risks of automation, and factors influencing alienation. Based on an understanding of these issues, a set of eight guidelines is proposed as a possible means of avoiding problems in implementing automation.

Comparison of different methods to quantify fat classes in bakery products.

PubMed

Shin, Jae-Min; Hwang, Young-Ok; Tu, Ock-Ju; Jo, Han-Bin; Kim, Jung-Hun; Chae, Young-Zoo; Rhu, Kyung-Hun; Park, Seung-Kook

2013-01-15

The definition of fat differs in different countries; thus whether fat is listed on food labels depends on the country. Some countries list crude fat content in the 'Fat' section on the food label, whereas other countries list total fat. In this study, three methods were used for determining fat classes and content in bakery products: the Folch method, the automated Soxhlet method, and the AOAC 996.06 method. The results using these methods were compared. Fat (crude) extracted by the Folch and Soxhlet methods was gravimetrically determined and assessed by fat class using capillary gas chromatography (GC). In most samples, fat (total) content determined by the AOAC 996.06 method was lower than the fat (crude) content determined by the Folch or automated Soxhlet methods. Furthermore, monounsaturated fat or saturated fat content determined by the AOAC 996.06 method was lowest. Almost no difference was observed between fat (crude) content determined by the Folch method and that determined by the automated Soxhlet method for nearly all samples. In three samples (wheat biscuits, butter cookies-1, and chocolate chip cookies), monounsaturated fat, saturated fat, and trans fat content obtained by the automated Soxhlet method was higher than that obtained by the Folch method. The polyunsaturated fat content obtained by the automated Soxhlet method was not higher than that obtained by the Folch method in any sample. Copyright © 2012 Elsevier Ltd. All rights reserved.

Reference Tools for Data Processing, Office Automation, and Data Communications: An Introductory Guide.

ERIC Educational Resources Information Center

Cupoli, Patricia Dymkar

1981-01-01

Provides an introduction to various reference sources which are useful in dealing with the areas of data processing, office automation, and communications technologies. A bibliography with vendor listings is included. (FM)

Automated Structural Optimization System (ASTROS). Volume 1. Theoretical Manual

DTIC Science & Technology

1988-12-01

corresponding frequency list are given by Equation C-9. The second set of parameters is the frequency list used in solving Equation C-3 to obtain the response...vector (u(w)). This frequency list is: w - 2*fo, 2wfi, 2wf2, 2wfn (C-20) The frequency lists (^ and w are not necessarily equal. While setting...alternative methods are used to input the frequency list u. For the first method, the frequency list u is input via two parameters: Aff (C-21

Flight-deck automation: Promises and problems

NASA Technical Reports Server (NTRS)

Wiener, E. L.; Curry, R. E.

1980-01-01

The state of the art in human factors in flight-deck automation is presented. A number of critical problem areas are identified and broad design guidelines are offered. Automation-related aircraft accidents and incidents are discussed as examples of human factors problems in automated flight.

Industrial Automation Mechanic Model Curriculum Project. Final Report.

ERIC Educational Resources Information Center

Toledo Public Schools, OH.

This document describes a demonstration program that developed secondary level competency-based instructional materials for industrial automation mechanics. Program activities included task list compilation, instructional materials research, learning activity packet (LAP) development, construction of lab elements, system implementation,…

Toward designing for trust in database automation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duez, P. P.; Jamieson, G. A.

Appropriate reliance on system automation is imperative for safe and productive work, especially in safety-critical systems. It is unsafe to rely on automation beyond its designed use; conversely, it can be both unproductive and unsafe to manually perform tasks that are better relegated to automated tools. Operator trust in automated tools mediates reliance, and trust appears to affect how operators use technology. As automated agents become more complex, the question of trust in automation is increasingly important. In order to achieve proper use of automation, we must engender an appropriate degree of trust that is sensitive to changes in operatingmore » functions and context. In this paper, we present research concerning trust in automation in the domain of automated tools for relational databases. Lee and See have provided models of trust in automation. One model developed by Lee and See identifies three key categories of information about the automation that lie along a continuum of attributional abstraction. Purpose-, process-and performance-related information serve, both individually and through inferences between them, to describe automation in such a way as to engender r properly-calibrated trust. Thus, one can look at information from different levels of attributional abstraction as a general requirements analysis for information key to appropriate trust in automation. The model of information necessary to engender appropriate trust in automation [1] is a general one. Although it describes categories of information, it does not provide insight on how to determine the specific information elements required for a given automated tool. We have applied the Abstraction Hierarchy (AH) to this problem in the domain of relational databases. The AH serves as a formal description of the automation at several levels of abstraction, ranging from a very abstract purpose-oriented description to a more concrete description of the resources involved in the automated process. The connection between an AH for an automated tool and a list of information elements at the three levels of attributional abstraction is then direct, providing a method for satisfying information requirements for appropriate trust in automation. In this paper, we will present our method for developing specific information requirements for an automated tool, based on a formal analysis of that tool and the models presented by Lee and See. We will show an example of the application of the AH to automation, in the domain of relational database automation, and the resulting set of specific information elements for appropriate trust in the automated tool. Finally, we will comment on the applicability of this approach to the domain of nuclear plant instrumentation. (authors)« less

Computer vision in the poultry industry

USDA-ARS?s Scientific Manuscript database

Computer vision is becoming increasingly important in the poultry industry due to increasing use and speed of automation in processing operations. Growing awareness of food safety concerns has helped add food safety inspection to the list of tasks that automated computer vision can assist. Researc...

The Automation Inventory of Research Libraries, 1989.

ERIC Educational Resources Information Center

Fayen, Emily Gallup

This inventory provides profiles, tables, and listings describing automated library activities at 103 Association of Research Libraries (ARL) institutions. The inventory includes analyses of aggregate information from individual library profiles which are then divided into three categories that reflect primarily bibliographic functions: (1)…

Automated analysis of biological oscillator models using mode decomposition.

PubMed

Konopka, Tomasz

2011-04-01

Oscillating signals produced by biological systems have shapes, described by their Fourier spectra, that can potentially reveal the mechanisms that generate them. Extracting this information from measured signals is interesting for the validation of theoretical models, discovery and classification of interaction types, and for optimal experiment design. An automated workflow is described for the analysis of oscillating signals. A software package is developed to match signal shapes to hundreds of a priori viable model structures defined by a class of first-order differential equations. The package computes parameter values for each model by exploiting the mode decomposition of oscillating signals and formulating the matching problem in terms of systems of simultaneous polynomial equations. On the basis of the computed parameter values, the software returns a list of models consistent with the data. In validation tests with synthetic datasets, it not only shortlists those model structures used to generate the data but also shows that excellent fits can sometimes be achieved with alternative equations. The listing of all consistent equations is indicative of how further invalidation might be achieved with additional information. When applied to data from a microarray experiment on mice, the procedure finds several candidate model structures to describe interactions related to the circadian rhythm. This shows that experimental data on oscillators is indeed rich in information about gene regulation mechanisms. The software package is available at http://babylone.ulb.ac.be/autoosc/.

PICKY: a novel SVD-based NMR spectra peak picking method.

PubMed

Alipanahi, Babak; Gao, Xin; Karakoc, Emre; Donaldson, Logan; Li, Ming

2009-06-15

Picking peaks from experimental NMR spectra is a key unsolved problem for automated NMR protein structure determination. Such a process is a prerequisite for resonance assignment, nuclear overhauser enhancement (NOE) distance restraint assignment, and structure calculation tasks. Manual or semi-automatic peak picking, which is currently the prominent way used in NMR labs, is tedious, time consuming and costly. We introduce new ideas, including noise-level estimation, component forming and sub-division, singular value decomposition (SVD)-based peak picking and peak pruning and refinement. PICKY is developed as an automated peak picking method. Different from the previous research on peak picking, we provide a systematic study of the proposed method. PICKY is tested on 32 real 2D and 3D spectra of eight target proteins, and achieves an average of 88% recall and 74% precision. PICKY is efficient. It takes PICKY on average 15.7 s to process an NMR spectrum. More important than these numbers, PICKY actually works in practice. We feed peak lists generated by PICKY to IPASS for resonance assignment, feed IPASS assignment to SPARTA for fragments generation, and feed SPARTA fragments to FALCON for structure calculation. This results in high-resolution structures of several proteins, for example, TM1112, at 1.25 A. PICKY is available upon request. The peak lists of PICKY can be easily loaded by SPARKY to enable a better interactive strategy for rapid peak picking.

DESAP 1: A structural design program with stress and displacement constraints. Volume 1: Theoretical and user's manual

NASA Technical Reports Server (NTRS)

Kiusalaas, J.; Reddy, G. B.

1977-01-01

A finite element program is presented for computer-automated, minimum weight design of elastic structures with constraints on stresses (including local instability criteria) and displacements. Volume 1 of the report contains the theoretical and user's manual of the program. Sample problems and the listing of the program are included in Volumes 2 and 3. The element subroutines are organized so as to facilitate additions and changes by the user. As a result, a relatively minor programming effort would be required to make DESAP 1 into a special purpose program to handle the user's specific design requirements and failure criteria.

A Serials Holdings List Using UNIX Refer.

ERIC Educational Resources Information Center

Boyce, Judith I.; Boyce, Bert R.

1987-01-01

Describes the production of an automated union list of serials holdings at minimal cost by a small consortium of state government libraries in Louisiana. Use of the UNIX Refer system without any modifications for data entry and production is described. (EM)

CATCH/IT: a data warehouse to support comprehensive assessment for tracking community health.

PubMed Central

Berndt, D. J.; Hevner, A. R.; Studnicki, J.

1998-01-01

A systematic methodology, Comprehensive Assessment for Tracking Community Health (CATCH), for analyzing the health status of communities has been under development at the University of South Florida since the early 1990s. CATCH draws 226 health status indicators from multiple data sources and uses an innovative comparative framework and weighted evaluation criteria to produce a rank-ordered list of community health problems. CATCH has been applied successfully in many Florida counties; focusing attention on high priority health issues and measuring the impact of health expenditures on community health status outcomes. Previously performed manually, we are using information technology (IT) to automate the CATCH methodology with a full-scale data warehouse, user-friendly forms and reports, and extended analysis and data mining capabilities. The automated system, CATCH/IT, will reduce the time to prepare community health status reports from months to days. In this paper, we present the current status of the project, along with the principal research and development issues and future directions of the project. PMID:9929220

CATCH/IT: a data warehouse to support comprehensive assessment for tracking community health.

PubMed

Berndt, D J; Hevner, A R; Studnicki, J

1998-01-01

A systematic methodology, Comprehensive Assessment for Tracking Community Health (CATCH), for analyzing the health status of communities has been under development at the University of South Florida since the early 1990s. CATCH draws 226 health status indicators from multiple data sources and uses an innovative comparative framework and weighted evaluation criteria to produce a rank-ordered list of community health problems. CATCH has been applied successfully in many Florida counties; focusing attention on high priority health issues and measuring the impact of health expenditures on community health status outcomes. Previously performed manually, we are using information technology (IT) to automate the CATCH methodology with a full-scale data warehouse, user-friendly forms and reports, and extended analysis and data mining capabilities. The automated system, CATCH/IT, will reduce the time to prepare community health status reports from months to days. In this paper, we present the current status of the project, along with the principal research and development issues and future directions of the project.

Identifying influenza-like illness presentation from unstructured general practice clinical narrative using a text classifier rule-based expert system versus a clinical expert.

PubMed

MacRae, Jayden; Love, Tom; Baker, Michael G; Dowell, Anthony; Carnachan, Matthew; Stubbe, Maria; McBain, Lynn

2015-10-06

We designed and validated a rule-based expert system to identify influenza like illness (ILI) from routinely recorded general practice clinical narrative to aid a larger retrospective research study into the impact of the 2009 influenza pandemic in New Zealand. Rules were assessed using pattern matching heuristics on routine clinical narrative. The system was trained using data from 623 clinical encounters and validated using a clinical expert as a gold standard against a mutually exclusive set of 901 records. We calculated a 98.2 % specificity and 90.2 % sensitivity across an ILI incidence of 12.4 % measured against clinical expert classification. Peak problem list identification of ILI by clinical coding in any month was 9.2 % of all detected ILI presentations. Our system addressed an unusual problem domain for clinical narrative classification; using notational, unstructured, clinician entered information in a community care setting. It performed well compared with other approaches and domains. It has potential applications in real-time surveillance of disease, and in assisted problem list coding for clinicians. Our system identified ILI presentation with sufficient accuracy for use at a population level in the wider research study. The peak coding of 9.2 % illustrated the need for automated coding of unstructured narrative in our study.

Directory of Library Automation Software, Systems, and Services. 1998 Edition.

ERIC Educational Resources Information Center

Cibbarelli, Pamela R., Ed.; Cibbarelli, Shawn E., Ed.

This book includes basic information to locate and compare available options for library automation based on various criteria such as hardware requirements, operating systems, components and applications, and price, and provides the necessary contact information to allow further investigation. The major part of the directory lists 211 software…

Natural language processing and inference rules as strategies for updating problem list in an electronic health record.

PubMed

Plazzotta, Fernando; Otero, Carlos; Luna, Daniel; de Quiros, Fernan Gonzalez Bernaldo

2013-01-01

Physicians do not always keep the problem list accurate, complete and updated. To analyze natural language processing (NLP) techniques and inference rules as strategies to maintain completeness and accuracy of the problem list in EHRs. Non systematic literature review in PubMed, in the last 10 years. Strategies to maintain the EHRs problem list were analyzed in two ways: inputting and removing problems from the problem list. NLP and inference rules have acceptable performance for inputting problems into the problem list. No studies using these techniques for removing problems were published Conclusion: Both tools, NLP and inference rules have had acceptable results as tools for maintain the completeness and accuracy of the problem list.

An Internet-based program for depressive symptoms using human and automated support: a randomized controlled trial

PubMed Central

Mira, Adriana; Bretón-López, Juana; García-Palacios, Azucena; Quero, Soledad; Baños, Rosa María; Botella, Cristina

2017-01-01

Purpose The purpose of this study was to analyze the efficacy of an Internet-based program for depressive symptoms using automated support by information and communication technologies (ICTs) and human support. Patients and methods An Internet-based program was used to teach adaptive ways to cope with depressive symptoms and daily problems. A total of 124 participants who were experiencing at least one stressful event that caused interference in their lives, many of whom had clinically significant depressive symptoms, were randomly assigned into either an intervention group with ICT support (automated mobile phone messages, automated emails, and continued feedback through the program); an intervention group with ICT support plus human support (brief weekly support phone call without clinical content); or a waiting-list control. At pre-, post-, and 12-month follow-up, they completed depression, anxiety, positive and negative effect, and perceived stress measures. Results were analyzed using both intention-to-treat and completers data. The majority were women (67.7%), with a mean age of 35.6 years (standard deviation =9.7). Results The analysis showed that the two intervention groups improved significantly pre- to posttreatment, compared with the control group. Furthermore, improvements were maintained at the 12-month follow-up. Adherence and satisfaction with the program was high in both conditions. Conclusion The Internet-based program was effective and well accepted, with and without human support, showing that ICT-based automated support may be useful. It is essential to continue to study other ICT strategies for providing support. PMID:28408833

Electronic problem lists: a thematic analysis of a systematic literature review to identify aspects critical to success.

PubMed

Hodge, Chad M; Narus, Scott P

2018-05-01

Problem list data is a driving force for many beneficial clinical tools, yet these data remain underutilized. We performed a systematic literature review, pulling insights from previous research, aggregating insights into themes, and distilling themes into actionable advice. We sought to learn what changes we could make to existing applications, to the clinical workflow, and to clinicians' perceptions that would improve problem list utilization and increase the prevalence of problems data in the electronic medical record. We followed Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines to systematically curate a corpus of pertinent articles. We performed a thematic analysis, looking for interesting excerpts and ideas. By aggregating excerpts from many authors, we gained broader, more inclusive insights into what makes a good problem list and what factors are conducive to its success. Analysis led to a list of 7 benefits of using the problem list, 15 aspects critical to problem list success, and knowledge to help inform policy development, such as consensus on what belongs on the problem list, who should maintain the problem list, and when. A list of suggestions is made on ways in which the problem list can be improved to increase utilization by clinicians. There is also a need for standard measurements of the problem list, so that lists can be measured, compared, and discussed with rigor and a common vocabulary.

Flight-deck automation - Promises and problems

NASA Technical Reports Server (NTRS)

Wiener, E. L.; Curry, R. E.

1980-01-01

The paper analyzes the role of human factors in flight-deck automation, identifies problem areas, and suggests design guidelines. Flight-deck automation using microprocessor technology and display systems improves performance and safety while leading to a decrease in size, cost, and power consumption. On the other hand negative factors such as failure of automatic equipment, automation-induced error compounded by crew error, crew error in equipment set-up, failure to heed automatic alarms, and loss of proficiency must also be taken into account. Among the problem areas discussed are automation of control tasks, monitoring of complex systems, psychosocial aspects of automation, and alerting and warning systems. Guidelines are suggested for designing, utilising, and improving control and monitoring systems. Investigation into flight-deck automation systems is important as the knowledge gained can be applied to other systems such as air traffic control and nuclear power generation, but the many problems encountered with automated systems need to be analyzed and overcome in future research.

46 CFR 530.12 - Publication.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the industry. (c) Location—(1) Generally. The statement of essential terms shall be published as a separate part of the individual carrier's automated tariff system. (2) Multi-party service contracts. For...) Commission listing. The Commission will publish on its website, www.fmc.gov, a listing of the locations of...

Pilot interaction with automated airborne decision making systems

NASA Technical Reports Server (NTRS)

Rouse, W. B.; Chu, Y. Y.; Greenstein, J. S.; Walden, R. S.

1976-01-01

An investigation was made of interaction between a human pilot and automated on-board decision making systems. Research was initiated on the topic of pilot problem solving in automated and semi-automated flight management systems and attempts were made to develop a model of human decision making in a multi-task situation. A study was made of allocation of responsibility between human and computer, and discussed were various pilot performance parameters with varying degrees of automation. Optimal allocation of responsibility between human and computer was considered and some theoretical results found in the literature were presented. The pilot as a problem solver was discussed. Finally the design of displays, controls, procedures, and computer aids for problem solving tasks in automated and semi-automated systems was considered.

Is the problem list in the eye of the beholder? An exploration of consistency across physicians.

PubMed

Krauss, John C; Boonstra, Philip S; Vantsevich, Anna V; Friedman, Charles P

2016-09-01

Quantify the variability of patients' problem lists - in terms of the number, type, and ordering of problems - across multiple physicians and assess physicians' criteria for organizing and ranking diagnoses. In an experimental setting, 32 primary care physicians generated and ordered problem lists for three identical complex internal medicine cases expressed as detailed 2- to 4-page abstracts and subsequently expressed their criteria for ordering items in the list. We studied variability in problem list length. We modified a previously validated rank-based similarity measure, with range of zero to one, to quantify agreement between pairs of lists and calculate a single consensus problem list that maximizes agreement with each physician. Physicians' reasoning for the ordering of the problem lists was recorded. Subjects' problem lists were highly variable. The median problem list length was 8 (range: 3-14) for Case A, 10 (range: 4-20) for Case B, and 7 (range: 3-13) for Case C. The median indices of agreement - taking into account the length, content, and order of lists - over all possible physician pairings was 0.479, 0.371, 0.509, for Cases A, B, and C, respectively. The median agreements between the physicians' lists and the consensus list for each case were 0.683, 0.581, and 0.697 (for Cases A, B, and C, respectively).Out of a possible 1488 pairings, 2 lists were identical. Physicians most frequently ranked problem list items based on their acuity and immediate threat to health. The problem list is a physician's mental model of a patient's health status. These mental models were found to vary significantly between physicians, raising questions about whether problem lists created by individual physicians can serve their intended purpose to improve care coordination. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

17 CFR 240.10A-3 - Listing standards relating to audit committees.

Code of Federal Regulations, 2011 CFR

2011-04-01

... management of one or more businesses which are conducted as a single economic enterprise; and (iii) Do not... this section, prohibit the initial or continued listing in an automated inter-dealer quotation system... registered public accounting firm engaged (including resolution of disagreements between management and the...

PICKY: a novel SVD-based NMR spectra peak picking method

PubMed Central

Alipanahi, Babak; Gao, Xin; Karakoc, Emre; Donaldson, Logan; Li, Ming

2009-01-01

Motivation: Picking peaks from experimental NMR spectra is a key unsolved problem for automated NMR protein structure determination. Such a process is a prerequisite for resonance assignment, nuclear overhauser enhancement (NOE) distance restraint assignment, and structure calculation tasks. Manual or semi-automatic peak picking, which is currently the prominent way used in NMR labs, is tedious, time consuming and costly. Results: We introduce new ideas, including noise-level estimation, component forming and sub-division, singular value decomposition (SVD)-based peak picking and peak pruning and refinement. PICKY is developed as an automated peak picking method. Different from the previous research on peak picking, we provide a systematic study of the proposed method. PICKY is tested on 32 real 2D and 3D spectra of eight target proteins, and achieves an average of 88% recall and 74% precision. PICKY is efficient. It takes PICKY on average 15.7 s to process an NMR spectrum. More important than these numbers, PICKY actually works in practice. We feed peak lists generated by PICKY to IPASS for resonance assignment, feed IPASS assignment to SPARTA for fragments generation, and feed SPARTA fragments to FALCON for structure calculation. This results in high-resolution structures of several proteins, for example, TM1112, at 1.25 Å. Availability: PICKY is available upon request. The peak lists of PICKY can be easily loaded by SPARKY to enable a better interactive strategy for rapid peak picking. Contact: mli@uwaterloo.ca PMID:19477998

A shared computer-based problem-oriented patient record for the primary care team.

PubMed

Linnarsson, R; Nordgren, K

1995-01-01

1. INTRODUCTION. A computer-based patient record (CPR) system, Swedestar, has been developed for use in primary health care. The principal aim of the system is to support continuous quality improvement through improved information handling, improved decision-making, and improved procedures for quality assurance. The Swedestar system has evolved during a ten-year period beginning in 1984. 2. SYSTEM DESIGN. The design philosophy is based on the following key factors: a shared, problem-oriented patient record; structured data entry based on an extensive controlled vocabulary; advanced search and query functions, where the query language has the most important role; integrated decision support for drug prescribing and care protocols and guidelines; integrated procedures for quality assurance. 3. A SHARED PROBLEM-ORIENTED PATIENT RECORD. The core of the CPR system is the problem-oriented patient record. All problems of one patient, recorded by different members of the care team, are displayed on the problem list. Starting from this list, a problem follow-up can be made, one problem at a time or for several problems simultaneously. Thus, it is possible to get an integrated view, across provider categories, of those problems of one patient that belong together. This shared problem-oriented patient record provides an important basis for the primary care team work. 4. INTEGRATED DECISION SUPPORT. The decision support of the system includes a drug prescribing module and a care protocol module. The drug prescribing module is integrated with the patient records and includes an on-line check of the patient's medication list for potential interactions and data-driven reminders concerning major drug problems. Care protocols have been developed for the most common chronic diseases, such as asthma, diabetes, and hypertension. The patient records can be automatically checked according to the care protocols. 5. PRACTICAL EXPERIENCE. The Swedestar system has been implemented in a primary care area with 30,000 inhabitants. It is being used by all the primary care team members: 15 general practitioners, 25 district nurses, and 10 physiotherapists. Several years of practical experience of the CPR system shows that it has a positive impact on quality of care on four levels: 1) improved clinical follow-up of individual patients; 2) facilitated follow-up of aggregated data such as practice activity analysis, annual reports, and clinical indicators; 3) automated medical audit; and 4) concurrent audit. Within that primary care area, quality of care has improved substantially in several aspects due to the use of the CPR system [1].

The 'problem' with automation - Inappropriate feedback and interaction, not 'over-automation'

NASA Technical Reports Server (NTRS)

Norman, D. A.

1990-01-01

Automation in high-risk industry is often blamed for causing harm and increasing the chance of human error when failures occur. It is proposed that the problem is not the presence of automation, but rather its inappropriate design. The problem is that the operations are performed appropriately under normal conditions, but there is inadequate feedback and interaction with the humans who must control the overall conduct of the task. The problem is that the automation is at an intermediate level of intelligence, powerful enough to take over control which used to be done by people, but not powerful enough to handle all abnormalities. Moreover, its level of intelligence is insufficient to provide the continual, appropriate feedback that occurs naturally among human operators. To solve this problem, the automation should either be made less intelligent or more so, but the current level is quite inappropriate. The overall message is that it is possible to reduce error through appropriate design considerations.

Human-Centered Aviation Automation: Principles and Guidelines

NASA Technical Reports Server (NTRS)

Billings, Charles E.

1996-01-01

This document presents principles and guidelines for human-centered automation in aircraft and in the aviation system. Drawing upon operational experience with highly automated aircraft, it describes classes of problems that have occurred in these vehicles, the effects of advanced automation on the human operators of the aviation system, and ways in which these problems may be avoided in the design of future aircraft and air traffic management automation. Many incidents and a few serious accidents suggest that these problems are related to automation complexity, autonomy, coupling, and opacity, or inadequate feedback to operators. An automation philosophy that emphasizes improved communication, coordination and cooperation between the human and machine elements of this complex, distributed system is required to improve the safety and efficiency of aviation operations in the future.

19 CFR 141.58 - Single entry for separately arriving portions of unassembled or disassembled entities.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., third of six portions). If both the carrier and the importer are automated, such adjustments may be made electronically through the CBP Automated Commercial System (ACS). The release of each portion upon arrival as... information for that portion of the ordered entity (for example, detailed packing lists). (f) Examination. CBP...

19 CFR 141.58 - Single entry for separately arriving portions of unassembled or disassembled entities.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., third of six portions). If both the carrier and the importer are automated, such adjustments may be made electronically through the CBP Automated Commercial System (ACS). The release of each portion upon arrival as... information for that portion of the ordered entity (for example, detailed packing lists). (f) Examination. CBP...

19 CFR 141.58 - Single entry for separately arriving portions of unassembled or disassembled entities.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., third of six portions). If both the carrier and the importer are automated, such adjustments may be made electronically through the CBP Automated Commercial System (ACS). The release of each portion upon arrival as... information for that portion of the ordered entity (for example, detailed packing lists). (f) Examination. CBP...

19 CFR 141.58 - Single entry for separately arriving portions of unassembled or disassembled entities.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., third of six portions). If both the carrier and the importer are automated, such adjustments may be made electronically through the CBP Automated Commercial System (ACS). The release of each portion upon arrival as... information for that portion of the ordered entity (for example, detailed packing lists). (f) Examination. CBP...

19 CFR 141.58 - Single entry for separately arriving portions of unassembled or disassembled entities.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., third of six portions). If both the carrier and the importer are automated, such adjustments may be made electronically through the CBP Automated Commercial System (ACS). The release of each portion upon arrival as... information for that portion of the ordered entity (for example, detailed packing lists). (f) Examination. CBP...

Automated Technologies Noncommercial/Nonprofit Curriculum Guides and Resources Available for Community Colleges and Technical Institutes.

ERIC Educational Resources Information Center

Doty, Charles R.

This annotated bibliography is intended to provide community college and technical institute personnel with a listing of available curriculum guides dealing with automated technologies. Described in the handbook are a total of 31 curriculum guides that were selected because they met the following criteria: availability in the ERIC system or…

Medical Information Management System (MIMS): An automated hospital information system

NASA Technical Reports Server (NTRS)

Alterescu, S.; Simmons, P. B.; Schwartz, R. A.

1971-01-01

An automated hospital information system that handles all data related to patient-care activities is described. The description is designed to serve as a manual for potential users, nontechnical medical personnel who may use the system. Examples of the system's operation, commentary on the examples, and a complete listing of the system program are included.

Development of Articulated Competency-Based Curriculum in Automated Systems/Robotics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

A project was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in cooperation with area vocational-technical schools, the first year of a competency-based curriculum in automated systems/robotics. Existing programs were reviewed by the task force and a list of sample competencies was developed and sent to area…

Automatic Text Analysis Based on Transition Phenomena of Word Occurrences

ERIC Educational Resources Information Center

Pao, Miranda Lee

1978-01-01

Describes a method of selecting index terms directly from a word frequency list, an idea originally suggested by Goffman. Results of the analysis of word frequencies of two articles seem to indicate that the automated selection of index terms from a frequency list holds some promise for automatic indexing. (Author/MBR)

Automation: triumph or trap?

PubMed

Smythe, M H

1997-01-01

Automation, a hot topic in the laboratory world today, can be a very expensive option. Those who are considering implementing automation can save time and money by examining the issues from the standpoint of an industrial/manufacturing engineer. The engineer not only asks what problems will be solved by automation, but what problems will be created. This article discusses questions that must be asked and answered to ensure that automation efforts will yield real and substantial payoffs.

Automated Identification of Medically Important Bacteria by 16S rRNA Gene Sequencing Using a Novel Comprehensive Database, 16SpathDB▿

PubMed Central

Woo, Patrick C. Y.; Teng, Jade L. L.; Yeung, Juilian M. Y.; Tse, Herman; Lau, Susanna K. P.; Yuen, Kwok-Yung

2011-01-01

Despite the increasing use of 16S rRNA gene sequencing, interpretation of 16S rRNA gene sequence results is one of the most difficult problems faced by clinical microbiologists and technicians. To overcome the problems we encountered in the existing databases during 16S rRNA gene sequence interpretation, we built a comprehensive database, 16SpathDB (http://147.8.74.24/16SpathDB) based on the 16S rRNA gene sequences of all medically important bacteria listed in the Manual of Clinical Microbiology and evaluated its use for automated identification of these bacteria. Among 91 nonduplicated bacterial isolates collected in our clinical microbiology laboratory, 71 (78%) were reported by 16SpathDB as a single bacterial species having >98.0% nucleotide identity with the query sequence, 19 (20.9%) were reported as more than one bacterial species having >98.0% nucleotide identity with the query sequence, and 1 (1.1%) was reported as no match. For the 71 bacterial isolates reported as a single bacterial species, all results were identical to their true identities as determined by a polyphasic approach. For the 19 bacterial isolates reported as more than one bacterial species, all results contained their true identities as determined by a polyphasic approach and all of them had their true identities as the “best match in 16SpathDB.” For the isolate (Gordonibacter pamelaeae) reported as no match, the bacterium has never been reported to be associated with human disease and was not included in the Manual of Clinical Microbiology. 16SpathDB is an automated, user-friendly, efficient, accurate, and regularly updated database for 16S rRNA gene sequence interpretation in clinical microbiology laboratories. PMID:21389154

Variable stars around selected open clusters in the VVV area: Young Stellar Objects

NASA Astrophysics Data System (ADS)

Medina, Nicolas; Borissova, Jura; Bayo, Amelia; Kurtev, Radostin; Lucas, Philip

2017-09-01

Time-varying phenomena are one of the most substantial sources of astrophysical information, and led to many fundamental discoveries in modern astronomy. We have developed an automated tool to search and analyze variable sources in the near infrared Ks band, using the data from the Vista Variables in the Vía Láctea (VVV) ESO Public Survey ([5, 8]). One of our main goals is to investigate the Young Stellar Objects (YSOs) in the Galactic star forming regions, looking for: •Variability. •New pre-main sequence star clusters. Here we present the newly discovered YSOs within some selected stellar clusters in our Galaxy.

A unified representation of findings in clinical radiology using the UMLS and DICOM.

PubMed

Bertaud, Valérie; Lasbleiz, Jérémy; Mougin, Fleur; Burgun, Anita; Duvauferrier, Régis

2008-09-01

Collecting and analyzing findings constitute the basis of medical activity. Computer assisted medical activity raises the problem of modelling findings. We propose a unified representation of findings integrating the representations of findings in the GAMUTS in Radiology [M.M. Reeder, B. Felson, GAMUTS in radiology Comprehensive lists of roentgen differential diagnosis, fourth ed., 2003], the Unified Medical Language System (UMLS), and the Digital Imaging and Communication in Medicine Structured Report (DICOM-SR). Starting from a corpus of findings in bone and joint radiology [M.M. Reeder, B. Felson, GAMUTS in Radiology comprehensive lists of roentgen differential diagnosis, fourth ed., 2003] (3481 words), an automated mapping to the UMLS was performed with the Metamap Program. The resulting UMLS terms and Semantic Types were analyzed in order to find a generic template in accordance with DICOM-SR structure. UMLS Concepts were missing for 45% of the GAMUTS findings. Three kinds of regularities were observed in the way the Semantic Types were combined: "pathological findings", "physiological findings" and "anatomical findings". A generic and original DICOM-SR template modelling finding was proposed. It was evaluated for representing GAMUTS jaws findings. 21% missing terms had to be picked up from Radlex (5%) or created (16%). This article shows that it is possible to represent findings using the UMLS and the DICOM SR formalism with a semi-automated method. The Metamap program helped to find a model to represent the semantic structure of free texts with standardized terms (UMLS Concepts). Nevertheless, the coverage of the UMLS is not comprehensive. This study shows that the UMLS should include more technical concepts and more concepts regarding findings, signs and symptoms to be suitable for radiology representation. The semi-automated translation of the whole GAMUTS using the UMLS concepts and the DICOM SR relations could help to create or supplement the DCMR Templates and Context Groups pertaining to the description of imaging findings.

Developing a Business Intelligence Process for a Training Module in SharePoint 2010

NASA Technical Reports Server (NTRS)

Schmidtchen, Bryce; Solano, Wanda M.; Albasini, Colby

2015-01-01

Prior to this project, training information for the employees of the National Center for Critical Processing and Storage (NCCIPS) was stored in an array of unrelated spreadsheets and SharePoint lists that had to be manually updated. By developing a content management system through a web application platform named SharePoint, this training system is now highly automated and provides a much less intensive method of storing training data and scheduling training courses. This system was developed by using SharePoint Designer and laying out the data structure for the interaction between different lists of data about the employees. The automation of data population inside of the lists was accomplished by implementing SharePoint workflows which essentially lay out the logic for how data is connected and calculated between certain lists. The resulting training system is constructed from a combination of five lists of data with a single list acting as the user-friendly interface. This interface is populated with the courses required for each employee and includes past and future information about course requirements. The employees of NCCIPS now have the ability to view, log, and schedule their training information and courses with much more ease. This system will relieve a significant amount of manual input and serve as a powerful informational resource for the employees of NCCIPS in the future.

An automated system for reduction of the firm's employees under maximal overall efficiency

NASA Astrophysics Data System (ADS)

Yonchev, Yoncho; Nikolov, Simeon; Baeva, Silvia

2012-11-01

Achieving maximal overall efficiency is a priority in all companies. This problem is formulated as a knap-sack problem and afterwards as a linear assignment problem. An automated system is created for solving of this problem.

Team play with a powerful and independent agent: a full-mission simulation study.

PubMed

Sarter, N B; Woods, D D

2000-01-01

One major problem with pilot-automation interaction on modern flight decks is a lack of mode awareness; that is, a lack of knowledge and understanding of the current and future status and behavior of the automation. A lack of mode awareness is not simply a pilot problem; rather, it is a symptom of a coordination breakdown between humans and machines. Recent changes in automation design can therefore be expected to have an impact on the nature of problems related to mode awareness. To examine how new automation properties might affect pilot-automation coordination, we performed a full-mission simulation study on one of the most advanced automated aircraft, the Airbus A-320. The results of this work indicate that mode errors and "automation surprises" still occur on these advanced aircraft. However, there appear to be more opportunities for delayed or missing interventions with undesirable system activities, possibly because of higher system autonomy and coupling.

Summary of astronaut inputs on automation and robotics for Space Station Freedom

NASA Technical Reports Server (NTRS)

Weeks, David J.

1990-01-01

Astronauts and payload specialists present specific recommendations in the form of an overview that relate to the use of automation and robotics on the Space Station Freedom. The inputs are based on on-orbit operations experience, time requirements for crews, and similar crew-specific knowledge that address the impacts of automation and robotics on productivity. Interview techniques and specific questionnaire results are listed, and the majority of the responses indicate that incorporating automation and robotics to some extent and with human backup can improve productivity. Specific support is found for the use of advanced automation and EVA robotics on the Space Station Freedom and for the use of advanced automation on ground-based stations. Ground-based control of in-flight robotics is required, and Space Station activities and crew tasks should be analyzed to assess the systems engineering approach for incorporating automation and robotics.

Factors Affecting the Full Use of Library and Information Management Systems by Library Personnel

ERIC Educational Resources Information Center

Skretas, Georgios

2005-01-01

Purpose: To provide a general list of factors that affects and determines the full use of library information management systems (LIMS) by library staff. Design/methodology/approach: The factors, which were identified mainly during participation in the implementation of automation projects in Greece, are listed and briefly analysed in categories…

False discovery rates in spectral identification.

PubMed

Jeong, Kyowon; Kim, Sangtae; Bandeira, Nuno

2012-01-01

Automated database search engines are one of the fundamental engines of high-throughput proteomics enabling daily identifications of hundreds of thousands of peptides and proteins from tandem mass (MS/MS) spectrometry data. Nevertheless, this automation also makes it humanly impossible to manually validate the vast lists of resulting identifications from such high-throughput searches. This challenge is usually addressed by using a Target-Decoy Approach (TDA) to impose an empirical False Discovery Rate (FDR) at a pre-determined threshold x% with the expectation that at most x% of the returned identifications would be false positives. But despite the fundamental importance of FDR estimates in ensuring the utility of large lists of identifications, there is surprisingly little consensus on exactly how TDA should be applied to minimize the chances of biased FDR estimates. In fact, since less rigorous TDA/FDR estimates tend to result in more identifications (at higher 'true' FDR), there is often little incentive to enforce strict TDA/FDR procedures in studies where the major metric of success is the size of the list of identifications and there are no follow up studies imposing hard cost constraints on the number of reported false positives. Here we address the problem of the accuracy of TDA estimates of empirical FDR. Using MS/MS spectra from samples where we were able to define a factual FDR estimator of 'true' FDR we evaluate several popular variants of the TDA procedure in a variety of database search contexts. We show that the fraction of false identifications can sometimes be over 10× higher than reported and may be unavoidably high for certain types of searches. In addition, we further report that the two-pass search strategy seems the most promising database search strategy. While unavoidably constrained by the particulars of any specific evaluation dataset, our observations support a series of recommendations towards maximizing the number of resulting identifications while controlling database searches with robust and reproducible TDA estimation of empirical FDR.

Healthcare provider attitudes towards the problem list in an electronic health record: a mixed-methods qualitative study

PubMed Central

2012-01-01

Background The problem list is a key part of the electronic health record (EHR) that allows practitioners to see a patient’s diagnoses and health issues. Yet, as the content of the problem list largely represents the subjective decisions of those who edit it, patients’ problem lists are often unreliable when shared across practitioners. The lack of standards for how the problem list is compiled in the EHR limits its effectiveness in improving patient care, particularly as a resource for clinical decision support and population management tools. The purpose of this study is to discover practitioner opinions towards the problem list and the logic behind their decisions during clinical situations. Materials and methods An observational cross-sectional study was conducted at two major Boston teaching hospitals. Practitioners’ opinions about the problem list were collected through both in-person interviews and an online questionnaire. Questions were framed using vignettes of clinical scenarios asking practitioners about their preferred actions towards the problem list. Results These data confirmed prior research that practitioners differ in their opinions over managing the problem list, but in most responses to a questionnaire, there was a common approach among the relative majority of respondents. Further, basic demographic characteristics of providers (age, medical experience, etc.) did not appear to strongly affect attitudes towards the problem list. Conclusion The results supported the premise that policies and EHR tools are needed to bring about a common approach. Further, the findings helped identify what issues might benefit the most from a defined policy and the level of restriction a problem list policy should place on the addition of different types of information. PMID:23140312

Beware of agents when flying aircraft: Basic principles behind a generic methodology for the evaluation and certification of advanced aviation systems

NASA Technical Reports Server (NTRS)

Javaux, Denis; Masson, Michel; Dekeyser, Veronique

1994-01-01

There is currently a growing interest in the aeronautical community to assess the effects of the increasing levels of automation on pilots' performance and overall safety. The first effect of automation is the change in the nature of the pilot's role on the flight deck. Pilots have become supervisors who monitor aircraft systems in usual situations and intervene only when unanticipated events occur. Instead of 'hand flying' the airplane, pilots contribute to the control of aircraft by acting as mediators, instructions given to the automation. By eliminating the need for manually controlling normal situations, such a role division has reduced the opportunities for the pilot to acquire experience and skills necessary to safely cope with abnormal events. Difficulties in assessing the state and behavior of automation arise mainly from four factors: (1) the complexity of current systems and consequence mode-related problems; (2) the intrinsic autonomy of automation which is able to fire mode transitions without explicit commands from the pilots; (3) the bad quality of feed-back from the control systems displays and interfaces to the pilots; and (4) the fact that the automation currently has no explicit representation of the current pilots' intentions and strategy. Assuming certification has among its major goals to guarantee the passengers' and pilots' safety and the airplane integrity under normal and abnormal operational conditions, the authors suggest it would be particularly fruitful to come up with a conceptual reference system providing the certification authorities both with a theoretical framework and a list of principles usable for assessing the quality of the equipment and designs under examination. This is precisely the scope of this paper. However, the authors recognize that the conceptual presented is still under development and would thus be best considered as a source of reflection for the design, evaluation and certification processes of advanced aviation technologies.

If this then that: an introduction to automated task services.

PubMed

Hoy, Matthew B

2015-01-01

This article explores automated task services, a type of website that allows users to create rules that are triggered by activity on one website and perform a task on another site. The most well-known automated task service is If This Then That (IFTTT), but recently a large number of these services have sprung up. These services can be used to connect websites, apps, business services, and even devices such as phones and home automation equipment. This allows for millions of possible combinations of rules, triggers, and actions. Librarians can put these services to use in many ways, from automating social media postings to remembering to bring their umbrella when rain is in the forecast. A list of popular automated task services is included, as well as a number of ideas for using these services in libraries.

Automated verification of flight software. User's manual

NASA Technical Reports Server (NTRS)

Saib, S. H.

1982-01-01

(Automated Verification of Flight Software), a collection of tools for analyzing source programs written in FORTRAN and AED is documented. The quality and the reliability of flight software are improved by: (1) indented listings of source programs, (2) static analysis to detect inconsistencies in the use of variables and parameters, (3) automated documentation, (4) instrumentation of source code, (5) retesting guidance, (6) analysis of assertions, (7) symbolic execution, (8) generation of verification conditions, and (9) simplification of verification conditions. Use of AVFS in the verification of flight software is described.

Containerless automated processing of intermetallic compounds and composites

NASA Technical Reports Server (NTRS)

Johnson, D. R.; Joslin, S. M.; Reviere, R. D.; Oliver, B. F.; Noebe, R. D.

1993-01-01

An automated containerless processing system has been developed to directionally solidify high temperature materials, intermetallic compounds, and intermetallic/metallic composites. The system incorporates a wide range of ultra-high purity chemical processing conditions. The utilization of image processing for automated control negates the need for temperature measurements for process control. The list of recent systems that have been processed includes Cr, Mo, Mn, Nb, Ni, Ti, V, and Zr containing aluminides. Possible uses of the system, process control approaches, and properties and structures of recently processed intermetallics are reviewed.

Information Retrieval Performance of Probabilistically Generated, Problem-Specific Computerized Provider Order Entry Pick-Lists: A Pilot Study

PubMed Central

Rothschild, Adam S.; Lehmann, Harold P.

2005-01-01

Objective: The aim of this study was to preliminarily determine the feasibility of probabilistically generating problem-specific computerized provider order entry (CPOE) pick-lists from a database of explicitly linked orders and problems from actual clinical cases. Design: In a pilot retrospective validation, physicians reviewed internal medicine cases consisting of the admission history and physical examination and orders placed using CPOE during the first 24 hours after admission. They created coded problem lists and linked orders from individual cases to the problem for which they were most indicated. Problem-specific order pick-lists were generated by including a given order in a pick-list if the probability of linkage of order and problem (PLOP) equaled or exceeded a specified threshold. PLOP for a given linked order-problem pair was computed as its prevalence among the other cases in the experiment with the given problem. The orders that the reviewer linked to a given problem instance served as the reference standard to evaluate its system-generated pick-list. Measurements: Recall, precision, and length of the pick-lists. Results: Average recall reached a maximum of .67 with a precision of .17 and pick-list length of 31.22 at a PLOP threshold of 0. Average precision reached a maximum of .73 with a recall of .09 and pick-list length of .42 at a PLOP threshold of .9. Recall varied inversely with precision in classic information retrieval behavior. Conclusion: We preliminarily conclude that it is feasible to generate problem-specific CPOE pick-lists probabilistically from a database of explicitly linked orders and problems. Further research is necessary to determine the usefulness of this approach in real-world settings. PMID:15684134

Problem Management Module: An Innovative System to Improve Problem List Workflow

PubMed Central

Hodge, Chad M.; Kuttler, Kathryn G.; Bowes, Watson A.; Narus, Scott P.

2014-01-01

Electronic problem lists are essential to modern health record systems, with a primary goal to serve as the repository of a patient’s current health issues. Additionally, coded problems can be used to drive downstream activities such as decision support, evidence-based medicine, billing, and cohort generation for research. Meaningful Use also requires use of a coded problem list. Over the course of three years, Intermountain Healthcare developed a problem management module (PMM) that provided innovative functionality to improve clinical workflow and boost problem list adoption, e.g. smart search, user customizable views, problem evolution, and problem timelines. In 23 months of clinical use, clinicians entered over 70,000 health issues, the percentage of free-text items dropped to 1.2%, completeness of problem list items increased by 14%, and more collaborative habits were initiated. PMID:25954372

A generalized approach to automated NMR peak list editing: application to reduced dimensionality triple resonance spectra.

PubMed

Moseley, Hunter N B; Riaz, Nadeem; Aramini, James M; Szyperski, Thomas; Montelione, Gaetano T

2004-10-01

We present an algorithm and program called Pattern Picker that performs editing of raw peak lists derived from multidimensional NMR experiments with characteristic peak patterns. Pattern Picker detects groups of correlated peaks within peak lists from reduced dimensionality triple resonance (RD-TR) NMR spectra, with high fidelity and high yield. With typical quality RD-TR NMR data sets, Pattern Picker performs almost as well as human analysis, and is very robust in discriminating real peak sets from noise and other artifacts in unedited peak lists. The program uses a depth-first search algorithm with short-circuiting to efficiently explore a search tree representing every possible combination of peaks forming a group. The Pattern Picker program is particularly valuable for creating an automated peak picking/editing process. The Pattern Picker algorithm can be applied to a broad range of experiments with distinct peak patterns including RD, G-matrix Fourier transformation (GFT) NMR spectra, and experiments to measure scalar and residual dipolar coupling, thus promoting the use of experiments that are typically harder for a human to analyze. Since the complexity of peak patterns becomes a benefit rather than a drawback, Pattern Picker opens new opportunities in NMR experiment design.

Automated packing systems: review of industrial implementations

NASA Astrophysics Data System (ADS)

Whelan, Paul F.; Batchelor, Bruce G.

1993-08-01

A rich theoretical background to the problems that occur in the automation of material handling can be found in operations research, production engineering, systems engineering and automation, more specifically machine vision, literature. This work has contributed towards the design of intelligent handling systems. This paper will review the application of these automated material handling and packing techniques to industrial problems. The discussion will also highlight the systems integration issues involved in these applications. An outline of one such industrial application, the automated placement of shape templates on to leather hides, is also discussed. The purpose of this system is to arrange shape templates on a leather hide in an efficient manner, so as to minimize the leather waste, before they are automatically cut from the hide. These pieces are used in the furniture and car manufacturing industries for the upholstery of high quality leather chairs and car seats. Currently this type of operation is semi-automated. The paper will outline the problems involved in the full automation of such a procedure.

Aligning institutional priorities: engaging house staff in a quality improvement and safety initiative to fulfill Clinical Learning Environment Review objectives and electronic medical record Meaningful Use requirements.

PubMed

Flanagan, Meghan R; Foster, Carolyn C; Schleyer, Anneliese; Peterson, Gene N; Mandell, Samuel P; Rudd, Kristina E; Joyner, Byron D; Payne, Thomas H

2016-02-01

House staff quality improvement projects are often not aligned with training institution priorities. House staff are the primary users of inpatient problem lists in academic medical centers, and list maintenance has significant patient safety and financial implications. Improvement of the problem list is an important objective for hospitals with electronic health records under the Meaningful Use program. House staff surveys were used to create an electronic problem list manager (PLM) tool enabling efficient problem list updating. Number of new problems added and house staff perceptions of the problem list were compared before and after PLM intervention. The PLM was used by 654 house staff after release. Surveys demonstrated increased problem list updating (P = .002; response rate 47%). Mean new problems added per day increased from 64 pre-PLM to 125 post-PLM (P < .001). This innovative project serves as a model for successful engagement of house staff in institutional quality and safety initiatives with tangible institutional benefits. Copyright © 2016 Elsevier Inc. All rights reserved.

An optimal user-interface for EPIMS database conversions and SSQ 25002 EEE parts screening

NASA Technical Reports Server (NTRS)

Watson, John C.

1996-01-01

The Electrical, Electronic, and Electromechanical (EEE) Parts Information Management System (EPIMS) database was selected by the International Space Station Parts Control Board for providing parts information to NASA managers and contractors. Parts data is transferred to the EPIMS database by converting parts list data to the EP1MS Data Exchange File Format. In general, parts list information received from contractors and suppliers does not convert directly into the EPIMS Data Exchange File Format. Often parts lists use different variable and record field assignments. Many of the EPES variables are not defined in the parts lists received. The objective of this work was to develop an automated system for translating parts lists into the EPIMS Data Exchange File Format for upload into the EPIMS database. Once EEE parts information has been transferred to the EPIMS database it is necessary to screen parts data in accordance with the provisions of the SSQ 25002 Supplemental List of Qualified Electrical, Electronic, and Electromechanical Parts, Manufacturers, and Laboratories (QEPM&L). The SSQ 2S002 standards are used to identify parts which satisfy the requirements for spacecraft applications. An additional objective for this work was to develop an automated system which would screen EEE parts information against the SSQ 2S002 to inform managers of the qualification status of parts used in spacecraft applications. The EPIMS Database Conversion and SSQ 25002 User Interfaces are designed to interface through the World-Wide-Web(WWW)/Internet to provide accessibility by NASA managers and contractors.

Automation in organizations: Eternal conflict

NASA Technical Reports Server (NTRS)

Dieterly, D. L.

1981-01-01

Some ideas on and insights into the problems associated with automation in organizations are presented with emphasis on the concept of automation, its relationship to the individual, and its impact on system performance. An analogy is drawn, based on an American folk hero, to emphasize the extent of the problems encountered when dealing with automation within an organization. A model is proposed to focus attention on a set of appropriate dimensions. The function allocation process becomes a prominent aspect of the model. The current state of automation research is mentioned in relation to the ideas introduced. Proposed directions for an improved understanding of automation's effect on the individual's efficiency are discussed. The importance of understanding the individual's perception of the system in terms of the degree of automation is highlighted.

The problem of automation: Inappropriate feedback and interaction, not overautomation

NASA Technical Reports Server (NTRS)

Norman, Donald A.

1989-01-01

As automation increasingly takes its place in industry, especially high-risk industry, it is often blamed for causing harm and increasing the chance of human error when failures occur. It is proposed that the problem is not the presence of automation, but rather its inappropriate design. The problem is that the operations are performed appropriately under normal conditions, but there is inadequate feedback and interaction with the humans who must control the overall conduct of the task. When the situations exceed the capabilities of the automatic equipment, then the inadequate feedback leads to difficulties for the human controllers. The problem is that the automation is at an intermediate level of intelligence, powerful enough to take over control that which used to be done by people, but not powerful enough to handle all abnormalities. Moreover, its level of intelligence is insufficient to provide the continual, appropriate feedback that occurs naturally among human operators. To solve this problem, the automation should either be made less intelligent or more so, but the current level is quite inappropriate. The overall message is that it is possible to reduce error through appropriate design considerations.

Automated clinical system for chromosome analysis

NASA Technical Reports Server (NTRS)

Castleman, K. R.; Friedan, H. J.; Johnson, E. T.; Rennie, P. A.; Wall, R. J. (Inventor)

1978-01-01

An automatic chromosome analysis system is provided wherein a suitably prepared slide with chromosome spreads thereon is placed on the stage of an automated microscope. The automated microscope stage is computer operated to move the slide to enable detection of chromosome spreads on the slide. The X and Y location of each chromosome spread that is detected is stored. The computer measures the chromosomes in a spread, classifies them by group or by type and also prepares a digital karyotype image. The computer system can also prepare a patient report summarizing the result of the analysis and listing suspected abnormalities.

Statistical Study of High-Velocity Compact Clouds Based on the Complete CO Imagings of the Central Molecular Zone

NASA Astrophysics Data System (ADS)

Tokuyama, Sekito; Oka, Tomoharu; Takekawa, Shunya; Yamada, Masaya; Iwata, Yuhei; Tsujimoto, Shiho

2017-01-01

High-velocity compact clouds (HVCCs) is one of the populations of peculiar clouds detected in the Central Molecular Zone (CMZ) of our Galaxy. They have compact appearances (< 5 pc) and large velocity widths (> 50 km s-1). Several explanations for the origin of HVCC were proposed; e.g., a series of supernovae (SN) explosions (Oka et al. 1999) or a gravitational kick by a point-like gravitational source (Oka et al. 2016). To investigate the statistical property of HVCCs, a complete list of them is acutely necessary. However, the previous list is not complete since the identification procedure included automated processes and manual selection (Nagai 2008). Here we developed an automated procedure to identify HVCCs in a spectral line data.

Summaries of press automation conference presented

NASA Astrophysics Data System (ADS)

Makhlin, A. Y.; Pokrovskaya, G. M.

1985-01-01

The automation and mechanization of cold and hot stamping were discussed. Problems in the comprehensive mechanization and automatio of stamping in machine building development were examined. Automation becomes effective when it is implemented in progressive manufacturing processes and a comprehensive approach to the solution of all problems, beginning with the delivery of initial materials and ending with the transportation of finished products to the warehouse. Production intensification and improvments of effectiveness of produced output through the comprehensive mechanization and automation of stamping operations are reported.

Automated electric power management and control for Space Station Freedom

NASA Technical Reports Server (NTRS)

Dolce, James L.; Mellor, Pamela A.; Kish, James A.

1990-01-01

A comprehensive automation design is being developed for Space Station Freedom's electric power system. It strives to increase station productivity by applying expert systems and conventional algorithms to automate power system operation. An integrated approach to the power system command and control problem is defined and used to direct technology development in: diagnosis, security monitoring and analysis, battery management, and cooperative problem-solving for resource allocation. The prototype automated power system is developed using simulations and test-beds.

An automated curation procedure for addressing chemical errors and inconsistencies in public datasets used in QSAR modelling.

PubMed

Mansouri, K; Grulke, C M; Richard, A M; Judson, R S; Williams, A J

2016-11-01

The increasing availability of large collections of chemical structures and associated experimental data provides an opportunity to build robust QSAR models for applications in different fields. One common concern is the quality of both the chemical structure information and associated experimental data. Here we describe the development of an automated KNIME workflow to curate and correct errors in the structure and identity of chemicals using the publicly available PHYSPROP physicochemical properties and environmental fate datasets. The workflow first assembles structure-identity pairs using up to four provided chemical identifiers, including chemical name, CASRNs, SMILES, and MolBlock. Problems detected included errors and mismatches in chemical structure formats, identifiers and various structure validation issues, including hypervalency and stereochemistry descriptions. Subsequently, a machine learning procedure was applied to evaluate the impact of this curation process. The performance of QSAR models built on only the highest-quality subset of the original dataset was compared with the larger curated and corrected dataset. The latter showed statistically improved predictive performance. The final workflow was used to curate the full list of PHYSPROP datasets, and is being made publicly available for further usage and integration by the scientific community.

Identifying problems and generating recommendations for enhancing complex systems: applying the abstraction hierarchy framework as an analytical tool.

PubMed

Xu, Wei

2007-12-01

This study adopts J. Rasmussen's (1985) abstraction hierarchy (AH) framework as an analytical tool to identify problems and pinpoint opportunities to enhance complex systems. The process of identifying problems and generating recommendations for complex systems using conventional methods is usually conducted based on incompletely defined work requirements. As the complexity of systems rises, the sheer mass of data generated from these methods becomes unwieldy to manage in a coherent, systematic form for analysis. There is little known work on adopting a broader perspective to fill these gaps. AH was used to analyze an aircraft-automation system in order to further identify breakdowns in pilot-automation interactions. Four steps follow: developing an AH model for the system, mapping the data generated by various methods onto the AH, identifying problems based on the mapped data, and presenting recommendations. The breakdowns lay primarily with automation operations that were more goal directed. Identified root causes include incomplete knowledge content and ineffective knowledge structure in pilots' mental models, lack of effective higher-order functional domain information displayed in the interface, and lack of sufficient automation procedures for pilots to effectively cope with unfamiliar situations. The AH is a valuable analytical tool to systematically identify problems and suggest opportunities for enhancing complex systems. It helps further examine the automation awareness problems and identify improvement areas from a work domain perspective. Applications include the identification of problems and generation of recommendations for complex systems as well as specific recommendations regarding pilot training, flight deck interfaces, and automation procedures.

Detecting and accounting for multiple sources of positional variance in peak list registration analysis and spin system grouping.

PubMed

Smelter, Andrey; Rouchka, Eric C; Moseley, Hunter N B

2017-08-01

Peak lists derived from nuclear magnetic resonance (NMR) spectra are commonly used as input data for a variety of computer assisted and automated analyses. These include automated protein resonance assignment and protein structure calculation software tools. Prior to these analyses, peak lists must be aligned to each other and sets of related peaks must be grouped based on common chemical shift dimensions. Even when programs can perform peak grouping, they require the user to provide uniform match tolerances or use default values. However, peak grouping is further complicated by multiple sources of variance in peak position limiting the effectiveness of grouping methods that utilize uniform match tolerances. In addition, no method currently exists for deriving peak positional variances from single peak lists for grouping peaks into spin systems, i.e. spin system grouping within a single peak list. Therefore, we developed a complementary pair of peak list registration analysis and spin system grouping algorithms designed to overcome these limitations. We have implemented these algorithms into an approach that can identify multiple dimension-specific positional variances that exist in a single peak list and group peaks from a single peak list into spin systems. The resulting software tools generate a variety of useful statistics on both a single peak list and pairwise peak list alignment, especially for quality assessment of peak list datasets. We used a range of low and high quality experimental solution NMR and solid-state NMR peak lists to assess performance of our registration analysis and grouping algorithms. Analyses show that an algorithm using a single iteration and uniform match tolerances approach is only able to recover from 50 to 80% of the spin systems due to the presence of multiple sources of variance. Our algorithm recovers additional spin systems by reevaluating match tolerances in multiple iterations. To facilitate evaluation of the algorithms, we developed a peak list simulator within our nmrstarlib package that generates user-defined assigned peak lists from a given BMRB entry or database of entries. In addition, over 100,000 simulated peak lists with one or two sources of variance were generated to evaluate the performance and robustness of these new registration analysis and peak grouping algorithms.

Semi-automated literature mining to identify putative biomarkers of disease from multiple biofluids

PubMed Central

2014-01-01

Background Computational methods for mining of biomedical literature can be useful in augmenting manual searches of the literature using keywords for disease-specific biomarker discovery from biofluids. In this work, we develop and apply a semi-automated literature mining method to mine abstracts obtained from PubMed to discover putative biomarkers of breast and lung cancers in specific biofluids. Methodology A positive set of abstracts was defined by the terms ‘breast cancer’ and ‘lung cancer’ in conjunction with 14 separate ‘biofluids’ (bile, blood, breastmilk, cerebrospinal fluid, mucus, plasma, saliva, semen, serum, synovial fluid, stool, sweat, tears, and urine), while a negative set of abstracts was defined by the terms ‘(biofluid) NOT breast cancer’ or ‘(biofluid) NOT lung cancer.’ More than 5.3 million total abstracts were obtained from PubMed and examined for biomarker-disease-biofluid associations (34,296 positive and 2,653,396 negative for breast cancer; 28,355 positive and 2,595,034 negative for lung cancer). Biological entities such as genes and proteins were tagged using ABNER, and processed using Python scripts to produce a list of putative biomarkers. Z-scores were calculated, ranked, and used to determine significance of putative biomarkers found. Manual verification of relevant abstracts was performed to assess our method’s performance. Results Biofluid-specific markers were identified from the literature, assigned relevance scores based on frequency of occurrence, and validated using known biomarker lists and/or databases for lung and breast cancer [NCBI’s On-line Mendelian Inheritance in Man (OMIM), Cancer Gene annotation server for cancer genomics (CAGE), NCBI’s Genes & Disease, NCI’s Early Detection Research Network (EDRN), and others]. The specificity of each marker for a given biofluid was calculated, and the performance of our semi-automated literature mining method assessed for breast and lung cancer. Conclusions We developed a semi-automated process for determining a list of putative biomarkers for breast and lung cancer. New knowledge is presented in the form of biomarker lists; ranked, newly discovered biomarker-disease-biofluid relationships; and biomarker specificity across biofluids. PMID:25379168

Application of heuristic satellite plan synthesis algorithms to requirements of the WARC-88 allotment plan

NASA Technical Reports Server (NTRS)

Heyward, Ann O.; Reilly, Charles H.; Walton, Eric K.; Mata, Fernando; Olen, Carl

1990-01-01

Creation of an Allotment Plan for the Fixed Satellite Service at the 1988 Space World Administrative Radio Conference (WARC) represented a complex satellite plan synthesis problem, involving a large number of planned and existing systems. Solutions to this problem at WARC-88 required the use of both automated and manual procedures to develop an acceptable set of system positions. Development of an Allotment Plan may also be attempted through solution of an optimization problem, known as the Satellite Location Problem (SLP). Three automated heuristic procedures, developed specifically to solve SLP, are presented. The heuristics are then applied to two specific WARC-88 scenarios. Solutions resulting from the fully automated heuristics are then compared with solutions obtained at WARC-88 through a combination of both automated and manual planning efforts.

Automation--planning to implementation; the problems en route.

PubMed Central

Pizer, I H

1976-01-01

Once the major decision to automate library processes is made, there are a variety of problems which may be encountered before the planned system becomes operational. These include problems of personnel, budget, procurement of adjunct services, institutional priorities, and manufacturing uncertainties. Actual and potential difficulties are discussed. PMID:1247703

A METHOD FOR AUTOMATED ANALYSIS OF 10 ML WATER SAMPLES CONTAINING ACIDIC, BASIC, AND NEUTRAL SEMIVOLATILE COMPOUNDS LISTED IN USEPA METHOD 8270 BY SOLID PHASE EXTRACTION COUPLED IN-LINE TO LARGE VOLUME INJECTION GAS CHROMATOGRAPHY/MASS SPECTROMETRY

EPA Science Inventory

Data is presented showing the progress made towards the development of a new automated system combining solid phase extraction (SPE) with gas chromatography/mass spectrometry for the single run analysis of water samples containing a broad range of acid, base and neutral compounds...

Mathematical Problem Solving Project Technical Report III: Module Development and Formative Evaluation. Appendix B - "Organizing Lists" Quizzes and Data.

ERIC Educational Resources Information Center

Indiana Univ., Bloomington. Mathematics Education Development Center.

This appendix to the Mathematical Problem Solving Project "Module Development and Formative Evaluation" contains trials 1 and 2 of the Organizing Lists quiz. Editorial feedback from teachers on the Organizing Lists booklet is given for trials 1 and 2. Editorial feedback from teachers on the Organizing Lists problem deck is given for…

VizieR Online Data Catalog: Catalog of Kepler flare stars (Van Doorsselaere+, 2017)

NASA Astrophysics Data System (ADS)

van Doorsselaere, T.; Shariati, H.; Debosscher, J.

2017-11-01

With an automated detection method, we have identified stellar flares in the long cadence observations of Kepler during quarter 15. We list each flare time for the respective Kepler objects. Furthermore, we list the flare amplitude and decay time after fitting the flare light curve with an exponential decay. Flare start times in long cadence data of Kepler during quarter 15. (1 data file).

Bibliographies.

ERIC Educational Resources Information Center

Bourdon, Cathleen

1998-01-01

Librarian's bookshelf lists books from 1990--covering academic/electronic/public/school/special libraries, administration/personnel, automation, bibliographic instruction, cataloging/classification, CD-ROM, YA services, collection development, copyright, customer service, education for librarianship, electronic libraries, facilities, fund raising,…

The Microcomputer Revolution.

ERIC Educational Resources Information Center

Fosdick, Howard

1980-01-01

Examines the development of the microcomputer and focuses on its potential for library automation. The characteristics of microcomputers and minicomputers are contrasted and a selected annotated bibliography includes a list of specialty magazines on microcomputers. (RAA)

[Groupamatic 360 C1 and automated blood donor processing in a transfusion center].

PubMed

Guimbretiere, J; Toscer, M; Harousseau, H

1978-03-01

Automation of donor management flow path is controlled by: --a 3 slip "port a punch" card, --the groupamatic unit with a result sorted out on punch paper tape, --the management computer off line connected to groupamatic. Data tracking at blood collection time is made by punching a card with the donor card used as a master card. Groupamatic performs: --a standard blood grouping with one run for registered donors and two runs for new donors, --a phenotyping with two runs, --a screening of irregular antibodies. Themanagement computer checks the correlation between the data of the two runs or the data of a single run and that of previous file. It updates the data resident in the central file and prints out: --the controls of the different blood group for the red cell panel, --The listing of error messages, --The listing of emergency call up, --The listing of collected blood units when arrived at the blood center, with quantitative and qualitative information such as: number of blood, units collected, donor addresses, etc., --Statistics, --Donor cards, --Diplomas.

Bi-Directional Communication: A Critical Component of HAT

NASA Technical Reports Server (NTRS)

Shively, Robert J.

2016-01-01

Known problems with automation include lack of mode awareness, automation brittleness, and risk of miscalibrated trust. Human-Autonomy Teaming (HAT) is essential for improving these problems. This presentation outlines critical components for Human-Autonomy Teaming.

Problems in modernization of automation systems at coal preparation plants

NASA Astrophysics Data System (ADS)

Myshlyaev, L. P.; Lyakhovets, M. V.; Venger, K. G.; Leontiev, I. A.; Makarov, G. V.; Salamatin, A. S.

2018-05-01

The factors influencing the process of modernization (reconstruction) of the automation systems at coal preparation plants are described. Problems such as heterogeneity of existing and developed systems, planning of reconstruction of a technological complex without taking into account modernization of automated systems, commissioning without stopping the existing technological complex, as well as problems of conducting procurement procedures are discussed. The option of stage-by-stage start-up and adjustment works in the conditions of modernization of systems without long stops of the process equipment is offered.

Potential benefits and hazards of increased reliance on cockpit automation

NASA Technical Reports Server (NTRS)

Wiener, Earl L.

1990-01-01

A review is presented of the introduction of advanced technology into the modern aircraft cockpit, bringing a new era of cockpit automation, and the opportunity for safe, fuel-efficient, computer-directed flight. It is shown that this advanced technology has also brought a number of problems, not due to equipment failure, but due to problems at the human-automation interface. Consideration is given to the interface, the ATC system, and to company, regulatory, and economic environments, as well as to how they contribute to these new problems.

Flexible automated approach for quantitative liquid handling of complex biological samples.

PubMed

Palandra, Joe; Weller, David; Hudson, Gary; Li, Jeff; Osgood, Sarah; Hudson, Emily; Zhong, Min; Buchholz, Lisa; Cohen, Lucinda H

2007-11-01

A fully automated protein precipitation technique for biological sample preparation has been developed for the quantitation of drugs in various biological matrixes. All liquid handling during sample preparation was automated using a Hamilton MicroLab Star Robotic workstation, which included the preparation of standards and controls from a Watson laboratory information management system generated work list, shaking of 96-well plates, and vacuum application. Processing time is less than 30 s per sample or approximately 45 min per 96-well plate, which is then immediately ready for injection onto an LC-MS/MS system. An overview of the process workflow is discussed, including the software development. Validation data are also provided, including specific liquid class data as well as comparative data of automated vs manual preparation using both quality controls and actual sample data. The efficiencies gained from this automated approach are described.

Automation in photogrammetry: Recent developments and applications (1972-1976)

USGS Publications Warehouse

Thompson, M.M.; Mikhail, E.M.

1976-01-01

An overview of recent developments in the automation of photogrammetry in various countries is presented. Conclusions regarding automated photogrammetry reached at the 1972 Congress in Ottawa are reviewed first as a background for examining the developments of 1972-1976. Applications are described for each country reporting significant developments. Among fifteen conclusions listed are statements concerning: the widespread practice of equipping existing stereoplotters with simple digitizers; the growing tendency to use minicomputers on-line with stereoplotters; the optimization of production of digital terrain models by progressive sampling in stereomodels; the potential of digitization of a photogrammetric model by density correlation on epipolar lines; the capabilities and economic aspects of advanced systems which permit simultaneous production of orthophotos, contours, and digital terrain models; the economy of off-line orthophoto systems; applications of digital image processing; automation by optical techniques; applications of sensors other than photographic imagery, and the role of photogrammetric phases in a completely automated cartographic system. ?? 1976.

Automated peak picking and peak integration in macromolecular NMR spectra using AUTOPSY.

PubMed

Koradi, R; Billeter, M; Engeli, M; Güntert, P; Wüthrich, K

1998-12-01

A new approach for automated peak picking of multidimensional protein NMR spectra with strong overlap is introduced, which makes use of the program AUTOPSY (automated peak picking for NMR spectroscopy). The main elements of this program are a novel function for local noise level calculation, the use of symmetry considerations, and the use of lineshapes extracted from well-separated peaks for resolving groups of strongly overlapping peaks. The algorithm generates peak lists with precise chemical shift and integral intensities, and a reliability measure for the recognition of each peak. The results of automated peak picking of NOESY spectra with AUTOPSY were tested in combination with the combined automated NOESY cross peak assignment and structure calculation routine NOAH implemented in the program DYANA. The quality of the resulting structures was found to be comparable with those from corresponding data obtained with manual peak picking. Copyright 1998 Academic Press.

An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

NASA Astrophysics Data System (ADS)

Roth, G. S.; Teuschler, J. M.; Budde, W. L.

1982-07-01

The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

Software development infrastructure for the HYBRID modeling and simulation project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epiney, Aaron S.; Kinoshita, Robert A.; Kim, Jong Suk

One of the goals of the HYBRID modeling and simulation project is to assess the economic viability of hybrid systems in a market that contains renewable energy sources like wind. The idea is that it is possible for the nuclear plant to sell non-electric energy cushions, which absorb (at least partially) the volatility introduced by the renewable energy sources. This system is currently modeled in the Modelica programming language. To assess the economics of the system, an optimization procedure is trying to find the minimal cost of electricity production. The RAVEN code is used as a driver for the wholemore » problem. It is assumed that at this stage, the HYBRID modeling and simulation framework can be classified as non-safety “research and development” software. The associated quality level is Quality Level 3 software. This imposes low requirements on quality control, testing and documentation. The quality level could change as the application development continues.Despite the low quality requirement level, a workflow for the HYBRID developers has been defined that include a coding standard and some documentation and testing requirements. The repository performs automated unit testing of contributed models. The automated testing is achieved via an open-source python script called BuildingsP from Lawrence Berkeley National Lab. BuildingsPy runs Modelica simulation tests using Dymola in an automated manner and generates and runs unit tests from Modelica scripts written by developers. In order to assure effective communication between the different national laboratories a biweekly videoconference has been set-up, where developers can report their progress and issues. In addition, periodic face-face meetings are organized intended to discuss high-level strategy decisions with management. A second means of communication is the developer email list. This is a list to which everybody can send emails that will be received by the collective of the developers and managers involved in the project. Thirdly, to exchange documents quickly, a SharePoint directory has been set-up. SharePoint allows teams and organizations to intelligently share, and collaborate on content from anywhere.« less

Automated spectral and timing analysis of AGNs

NASA Astrophysics Data System (ADS)

Munz, F.; Karas, V.; Guainazzi, M.

2006-12-01

% We have developed an autonomous script that helps the user to automate the XMM-Newton data analysis for the purposes of extensive statistical investigations. We test this approach by examining X-ray spectra of bright AGNs pre-selected from the public database. The event lists extracted in this process were studied further by constructing their energy-resolved Fourier power-spectrum density. This analysis combines energy distributions, light-curves, and their power-spectra and it proves useful to assess the variability patterns present is the data. As another example, an automated search was based on the XSPEC package to reveal the emission features in 2-8 keV range.

MRO Sequence Checking Tool

NASA Technical Reports Server (NTRS)

Fisher, Forest; Gladden, Roy; Khanampornpan, Teerapat

2008-01-01

The MRO Sequence Checking Tool program, mro_check, automates significant portions of the MRO (Mars Reconnaissance Orbiter) sequence checking procedure. Though MRO has similar checks to the ODY s (Mars Odyssey) Mega Check tool, the checks needed for MRO are unique to the MRO spacecraft. The MRO sequence checking tool automates the majority of the sequence validation procedure and check lists that are used to validate the sequences generated by MRO MPST (mission planning and sequencing team). The tool performs more than 50 different checks on the sequence. The automation varies from summarizing data about the sequence needed for visual verification of the sequence, to performing automated checks on the sequence and providing a report for each step. To allow for the addition of new checks as needed, this tool is built in a modular fashion.

Automated and Autonomous Systems for Combat Service Support: Scoping Study and Technology Prioritisation

DTIC Science & Technology

2016-10-01

workshop, and use case development for automated and autonomous systems for CSS. The scoping study covers key concepts and trends, a technology scan, and...requirements and delimiters for the selected technologies. The report goes on to present detailed use cases for two technologies of interest: semi...selected use cases . As a result of the workshop, the large list of technologies and applications from the scoping study was narrowed down to the top

A Human-Automation Interface Model to Guide Automation Design of System Functions: A Way to Achieve Manning Goals in New Systems

DTIC Science & Technology

2005-12-01

60 x THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF TABLES Table 1...anywhere from one minute to several hours, depending on the needs of the analyst. The models generated for this thesis were set to run for 60 ...of a workload threshold goes back to the original LHX analysis from McCracken and Aldrich (1984). The IMPRINT 59 workload value of 60 has been

List-Based Simulated Annealing Algorithm for Traveling Salesman Problem.

PubMed

Zhan, Shi-hua; Lin, Juan; Zhang, Ze-jun; Zhong, Yi-wen

2016-01-01

Simulated annealing (SA) algorithm is a popular intelligent optimization algorithm which has been successfully applied in many fields. Parameters' setting is a key factor for its performance, but it is also a tedious work. To simplify parameters setting, we present a list-based simulated annealing (LBSA) algorithm to solve traveling salesman problem (TSP). LBSA algorithm uses a novel list-based cooling schedule to control the decrease of temperature. Specifically, a list of temperatures is created first, and then the maximum temperature in list is used by Metropolis acceptance criterion to decide whether to accept a candidate solution. The temperature list is adapted iteratively according to the topology of the solution space of the problem. The effectiveness and the parameter sensitivity of the list-based cooling schedule are illustrated through benchmark TSP problems. The LBSA algorithm, whose performance is robust on a wide range of parameter values, shows competitive performance compared with some other state-of-the-art algorithms.

Autopilot, Mind Wandering, and the Out of the Loop Performance Problem.

PubMed

Gouraud, Jonas; Delorme, Arnaud; Berberian, Bruno

2017-01-01

To satisfy the increasing demand for safer critical systems, engineers have integrated higher levels of automation, such as glass cockpits in aircraft, power plants, and driverless cars. These guiding principles relegate the operator to a monitoring role, increasing risks for humans to lack system understanding. The out of the loop performance problem arises when operators suffer from complacency and vigilance decrement; consequently, when automation does not behave as expected, understanding the system or taking back manual control may be difficult. Close to the out of the loop problem, mind wandering points to the propensity of the human mind to think about matters unrelated to the task at hand. This article reviews the literature related to both mind wandering and the out of the loop performance problem as it relates to task automation. We highlight studies showing how these phenomena interact with each other while impacting human performance within highly automated systems. We analyze how this proximity is supported by effects observed in automated environment, such as decoupling, sensory attention, and cognitive comprehension decrease. We also show that this link could be useful for detecting out of the loop situations through mind wandering markers. Finally, we examine the limitations of the current knowledge because many questions remain open to characterize interactions between out of the loop, mind wandering, and automation.

Ethics, finance, and automation: a preliminary survey of problems in high frequency trading.

PubMed

Davis, Michael; Kumiega, Andrew; Van Vliet, Ben

2013-09-01

All of finance is now automated, most notably high frequency trading. This paper examines the ethical implications of this fact. As automation is an interdisciplinary endeavor, we argue that the interfaces between the respective disciplines can lead to conflicting ethical perspectives; we also argue that existing disciplinary standards do not pay enough attention to the ethical problems automation generates. Conflicting perspectives undermine the protection those who rely on trading should have. Ethics in finance can be expanded to include organizational and industry-wide responsibilities to external market participants and society. As a starting point, quality management techniques can provide a foundation for a new cross-disciplinary ethical standard in the age of automation.

[Problem list in computer-based patient records].

PubMed

Ludwig, C A

1997-01-14

Computer-based clinical information systems are capable of effectively processing even large amounts of patient-related data. However, physicians depend on rapid access to summarized, clearly laid out data on the computer screen to inform themselves about a patient's current clinical situation. In introducing a clinical workplace system, we therefore transformed the problem list-which for decades has been successfully used in clinical information management-into an electronic equivalent and integrated it into the medical record. The table contains a concise overview of diagnoses and problems as well as related findings. Graphical information can also be integrated into the table, and an additional space is provided for a summary of planned examinations or interventions. The digital form of the problem list makes it possible to use the entire list or selected text elements for generating medical documents. Diagnostic terms for medical reports are transferred automatically to corresponding documents. Computer technology has an immense potential for the further development of problem list concepts. With multimedia applications sound and images will be included in the problem list. For hyperlink purpose the problem list could become a central information board and table of contents of the medical record, thus serving as the starting point for database searches and supporting the user in navigating through the medical record.

Information Technology: A Bibliography.

ERIC Educational Resources Information Center

Wright, William F.; Hawkins, Donald T.

1981-01-01

This selective annotated bibliography lists 86 references on the following topics: future technology for libraries, library automation, paperless information systems; computer conferencing and electronic mail, videotext systems, videodiscs, communications technology, networks, information retrieval, cataloging, microcomputers, and minicomputers.…

Software on the Peregrine System | High-Performance Computing | NREL

Science.gov Websites

. Development Tools View list of tools for build automation, version control, and high-level or specialized scripting. Toolchains Learn about the available toolchains to build applications from source code

Boeing flight deck design philosophy

NASA Technical Reports Server (NTRS)

Stoll, Harty

1990-01-01

Information relative to Boeing flight deck design philosophy is given in viewgraph form. Flight deck design rules, design considerations, functions allocated to the crew, redundancy and automation concerns, and examples of accident data that were reviewed are listed.

The Potential of Automated Corrective Feedback to Remediate Cohesion Problems in Advanced Students' Writing

ERIC Educational Resources Information Center

Strobl, Carola

2017-01-01

This study explores the potential of a feedback environment using simple string-based pattern matching technology for the provision of automated corrective feedback on cohesion problems. Thirty-eight high-frequent problems, including non-target like use of connectives and co-references were addressed providing both direct and indirect feedback.…

Understanding of the Cyber Security and the Development of CAPTCHA

NASA Astrophysics Data System (ADS)

Yang, Yu

2018-04-01

CAPTCHA is the abbreviation of "Completely Automated Public Turing Test to Tell Computers and Humans Apart", which is a program algorithm for distinguishing between computers and humans. It is able to generate and evaluate tests that are easy for human to pass yet are not possible for computers to. Common CAPTCHA generally contains symbols, text, pictures, and even videos, which is mainly used for human-computer verification. With the popularization of the Internet and its related applications, many malicious attacks against websites, systems and servers gradually appear. Therefore, the research on CAPTCHA is especially important. This article will briefly summarize and introduce the existing CAPTCHA technology, and summarizes the common problems of network attacks and information security. After listing the common type of CAPTCHA, it will finally propose feasible suggestions for the development of CAPTCHA.

Airport Surface Traffic Automation Study.

DTIC Science & Technology

1988-05-09

the use of Artificial Intellignece * technology in enroute ATC can be applied directly to the surface control problem. 7.6 Development Approach The next...problems in airport surface control. If artificial intelligance provides useful results for airborne automation, the same techniques should prove useful

Human Factors of Flight-deck Automation: NASA/Industry Workshop

NASA Technical Reports Server (NTRS)

Boehm-Davis, D. A.; Curry, R. E.; Wiener, E. L.; Harrison, R. L.

1981-01-01

The scope of automation, the benefits of automation, and automation-induced problems were discussed at a workshop held to determine whether those functions previously performed manually on the flight deck of commercial aircraft should always be automated in view of various human factors. Issues which require research for resolution were identified. The research questions developed are presented.

Weighty Problems: Predictors of Family Physicians Documenting Overweight and Obesity.

PubMed

Cyr, Peggy R; Haskins, Amy E; Holt, Christina; Hanifi, Jasmine

2016-03-01

Documenting obesity on the problem list has been shown to promote action about obesity and overweight, yet a majority of primary care providers do not record obesity on the medical problem list. With this in mind, our objectives were to determine the proportion of physicians' documentation of overweight (OW) or obesity on the problem list in our primary care teaching practice and to identify predictors of physician documentation of OW/obesity. De-identified health records of 6,195 adult patients with BMI ? 25 kg/m2 seen by a family physician over a 2-year period were included. Using multivariate logistic regression, patient age, BMI, gender, race, insurance, comorbidities, number of visits, physician gender or role, and practice site (suburban versus urban) were examined in relation to inclusion of OW/obesity on the medical problem list. Few (21.1%) patients had OW/obesity on their problem list. In the multivariate model, female PCPs were significantly more likely to document OW/obesity (OR=1.39, 95% CI=1.18--1.63) compared to male PCPs, and faculty were 26% more likely to document obesity (95% CI=1.07--1.48) compared to residents. Female patients, those with hypertension, diabetes, hyperlipidemia, and those with six or more visits were significantly more likely to have obesity on their problem lists, while patients with Medicaid were less likely to have obesity recorded. No significant difference was seen by race. Nearly 80% of OW and obese patients were not identified on the problem list. Patient gender, comorbidity, and number of visits were associated with documentation. Future research should examine automatic documentation of OW/obesity on the medical problem list.

Knowledge-based systems for power management

NASA Technical Reports Server (NTRS)

Lollar, L. F.

1992-01-01

NASA-Marshall's Electrical Power Branch has undertaken the development of expert systems in support of further advancements in electrical power system automation. Attention is given to the features (1) of the Fault Recovery and Management Expert System, (2) a resource scheduler or Master of Automated Expert Scheduling Through Resource Orchestration, and (3) an adaptive load-priority manager, or Load Priority List Management System. The characteristics of an advisory battery manager for the Hubble Space Telescope, designated the 'nickel-hydrogen expert system', are also noted.

Information prioritization for control and automation of space operations

NASA Technical Reports Server (NTRS)

Ray, Asock; Joshi, Suresh M.; Whitney, Cynthia K.; Jow, Hong N.

1987-01-01

The applicability of a real-time information prioritization technique to the development of a decision support system for control and automation of Space Station operations is considered. The steps involved in the technique are described, including the definition of abnormal scenarios and of attributes, measures of individual attributes, formulation and optimization of a cost function, simulation of test cases on the basis of the cost function, and examination of the simulation scenerios. A list is given comparing the intrinsic importances of various Space Station information data.

KCNSC Automated RAIL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branson, Donald

The KCNSC Automated RAIL (Rolling Action Item List) system provides an electronic platform to manage and escalate rolling action items within an business and manufacturing environment at Honeywell. The software enables a tiered approach to issue management where issues are escalated up a management chain based on team input and compared to business metrics. The software manages action items at different levels of the organization and allows all users to discuss action items concurrently. In addition, the software drives accountability through timely emails and proper visibility during team meetings.

Science Notes.

ERIC Educational Resources Information Center

Shaw, G. W.; And Others

1989-01-01

Provides a reading list for A- and S-level biology. Contains several experiments and demonstrations with topics on: the intestine, bullock corneal cells, valences, the science of tea, automated hydrolysis, electronics characteristics, bromine diffusion, enthalpy of vaporization determination, thermometers, pendulums, hovercraft, Bernoulli fluid…

IFLA General Conference, 1986. Pre-Conference Seminar on Automated Systems for Access to Multilingual and Multiscript Library materials: Problems and Solutions. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

A seminar which considered problems and solutions regarding automated systems for access to multilingual and multiscript library materials was held as a pre-session before the IFLA general conference in 1986. Papers presented include: (1) "Romanized and Transliterated Databases of Asian Language Materials--History, Problems, and…

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2005-01-01

This is a listing of recent unclassified RTO technical publications for January 1, 2005 through March 31, 2005 processed by the NASA Center for AeroSpace Center available on the NASA Aeronautics and Space Database. Contents include 1) Electronic Information Management; 2) Decision Support to Combined Joint Task Force and Component Commanders; 3) RTO Technical Publications : A Quarterly Listing (December 2004); 4) The Role of Humans in Intelligent and Automated Systems.

Use of an electronic problem list by primary care providers and specialists.

PubMed

Wright, Adam; Feblowitz, Joshua; Maloney, Francine L; Henkin, Stanislav; Bates, David W

2012-08-01

Accurate patient problem lists are valuable tools for improving the quality of care, enabling clinical decision support, and facilitating research and quality measurement. However, problem lists are frequently inaccurate and out-of-date and use varies widely across providers. Our goal was to assess provider use of an electronic problem list and identify differences in usage between medical specialties. Chart review of a random sample of 100,000 patients who had received care in the past two years at a Boston-based academic medical center. Counts were collected of all notes and problems added for each patient from 1/1/2002 to 4/30/2010. For each entry, the recording provider and the clinic in which the entry was recorded was collected. We used the Healthcare Provider Taxonomy Code Set to categorize each clinic by specialty. We analyzed the problem list use across specialties, controlling for note volume as a proxy for visits. A total of 2,264,051 notes and 158,105 problems were recorded in the electronic medical record for this population during the study period. Primary care providers added 82.3% of all problems, despite writing only 40.4% of all notes. Of all patients, 49.1% had an assigned primary care provider (PCP) affiliated with the hospital; patients with a PCP had an average of 4.7 documented problems compared to 1.5 problems for patients without a PCP. Primary care providers were responsible for the majority of problem documentation; surgical and medical specialists and subspecialists recorded a disproportionately small number of problems on the problem list.

Design automation techniques for custom LSI arrays

NASA Technical Reports Server (NTRS)

Feller, A.

1975-01-01

The standard cell design automation technique is described as an approach for generating random logic PMOS, CMOS or CMOS/SOS custom large scale integration arrays with low initial nonrecurring costs and quick turnaround time or design cycle. The system is composed of predesigned circuit functions or cells and computer programs capable of automatic placement and interconnection of the cells in accordance with an input data net list. The program generates a set of instructions to drive an automatic precision artwork generator. A series of support design automation and simulation programs are described, including programs for verifying correctness of the logic on the arrays, performing dc and dynamic analysis of MOS devices, and generating test sequences.

Completely automated modal analysis procedure based on the combination of different OMA methods

NASA Astrophysics Data System (ADS)

Ripamonti, Francesco; Bussini, Alberto; Resta, Ferruccio

2018-03-01

In this work a completely automated output-only Modal Analysis procedure is presented and all its benefits are listed. Based on the merging of different Operational Modal Analysis methods and a statistical approach, the identification process has been improved becoming more robust and giving as results only the real natural frequencies, damping ratios and mode shapes of the system. The effect of the temperature can be taken into account as well, leading to the creation of a better tool for automated Structural Health Monitoring. The algorithm has been developed and tested on a numerical model of a scaled three-story steel building present in the laboratories of Politecnico di Milano.

National Space Science Data Center data archive and distribution service (NDADS) automated retrieval mail system user's guide

NASA Technical Reports Server (NTRS)

Perry, Charleen M.; Vansteenberg, Michael E.

1992-01-01

The National Space Science Data Center (NSSDC) has developed an automated data retrieval request service utilizing our Data Archive and Distribution Service (NDADS) computer system. NDADS currently has selected project data written to optical disk platters with the disks residing in a robotic 'jukebox' near-line environment. This allows for rapid and automated access to the data with no staff intervention required. There are also automated help information and user services available that can be accessed. The request system permits an average-size data request to be completed within minutes of the request being sent to NSSDC. A mail message, in the format described in this document, retrieves the data and can send it to a remote site. Also listed in this document are the data currently available.

Determinants of a successful problem list to support the implementation of the problem-oriented medical record according to recent literature.

PubMed

Simons, Sereh M J; Cillessen, Felix H J M; Hazelzet, Jan A

2016-08-02

A problem-oriented approach is one of the possibilities to organize a medical record. The problem-oriented medical record (POMR) - a structured organization of patient information per presented medical problem- was introduced at the end of the sixties by Dr. Lawrence Weed to aid dealing with the multiplicity of patient problems. The problem list as a precondition is the centerpiece of the problem-oriented medical record (POMR) also called problem-oriented record (POR). Prior to the digital era, paper records presented a flat list of medical problems to the healthcare professional without the features that are possible with current technology. In modern EHRs a POMR based on a structured problem list can be used for clinical decision support, registries, order management, population health, and potentially other innovative functionality in the future, thereby providing a new incentive to the implementation and use of the POMR. On both 12 May 2014 and 1 June 2015 a systematic literature search was conducted. From the retrieved articles statements regarding the POMR and related to successful or non-successful implementation, were categorized. Generic determinants were extracted from these statements. In this research 38 articles were included. The literature analysis led to 12 generic determinants: clinical practice/reasoning, complete and accurate problem list, data structure/content, efficiency, functionality, interoperability, multi-disciplinary, overview of patient information, quality of care, system support, training of staff, and usability. Two main subjects can be distinguished in the determinants: the system that the problem list and POMR is integrated in and the organization using that system. The combination of the two requires a sociotechnical approach and both are equally important for successful implementation of a POMR. All the determinants have to be taken into account, but the weight given to each of the determinants depends on the organizationusing the problem list or POMR.

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320.

PubMed

Sarter, N B; Woods, D D

1997-12-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320

NASA Technical Reports Server (NTRS)

Sarter, N. B.; Woods, D. D.

1997-01-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

Problems on Divisibility of Binomial Coefficients

ERIC Educational Resources Information Center

Osler, Thomas J.; Smoak, James

2004-01-01

Twelve unusual problems involving divisibility of the binomial coefficients are represented in this article. The problems are listed in "The Problems" section. All twelve problems have short solutions which are listed in "The Solutions" section. These problems could be assigned to students in any course in which the binomial theorem and Pascal's…

List-Based Simulated Annealing Algorithm for Traveling Salesman Problem

PubMed Central

Zhan, Shi-hua; Lin, Juan; Zhang, Ze-jun

2016-01-01

Simulated annealing (SA) algorithm is a popular intelligent optimization algorithm which has been successfully applied in many fields. Parameters' setting is a key factor for its performance, but it is also a tedious work. To simplify parameters setting, we present a list-based simulated annealing (LBSA) algorithm to solve traveling salesman problem (TSP). LBSA algorithm uses a novel list-based cooling schedule to control the decrease of temperature. Specifically, a list of temperatures is created first, and then the maximum temperature in list is used by Metropolis acceptance criterion to decide whether to accept a candidate solution. The temperature list is adapted iteratively according to the topology of the solution space of the problem. The effectiveness and the parameter sensitivity of the list-based cooling schedule are illustrated through benchmark TSP problems. The LBSA algorithm, whose performance is robust on a wide range of parameter values, shows competitive performance compared with some other state-of-the-art algorithms. PMID:27034650

Learning from Automation Surprises and "Going Sour" Accidents: Progress on Human-Centered Automation

NASA Technical Reports Server (NTRS)

Woods, David D.; Sarter, Nadine B.

1998-01-01

Advances in technology and new levels of automation on commercial jet transports has had many effects. There have been positive effects from both an economic and a safety point of view. The technology changes on the flight deck also have had reverberating effects on many other aspects of the aviation system and different aspects of human performance. Operational experience, research investigations, incidents, and occasionally accidents have shown that new and sometimes surprising problems have arisen as well. What are these problems with cockpit automation, and what should we learn from them? Do they represent over-automation or human error? Or instead perhaps there is a third possibility - they represent coordination breakdowns between operators and the automation? Are the problems just a series of small independent glitches revealed by specific accidents or near misses? Do these glitches represent a few small areas where there are cracks to be patched in what is otherwise a record of outstanding designs and systems? Or do these problems provide us with evidence about deeper factors that we need to address if we are to maintain and improve aviation safety in a changing world? How do the reverberations of technology change on the flight deck provide insight into generic issues about developing human-centered technologies and systems (Winograd and Woods, 1997)? Based on a series of investigations of pilot interaction with cockpit automation (Sarter and Woods, 1992; 1994; 1995; 1997a, 1997 b), supplemented by surveys, operational experience and incident data from other studies (e.g., Degani et al., 1995; Eldredge et al., 1991; Tenney et al., 1995; Wiener, 1989), we too have found that the problems that surround crew interaction with automation are more than a series of individual glitches. These difficulties are symptoms that indicate deeper patterns and phenomena concerning human-machine cooperation and paths towards disaster. In addition, we find the same kinds of patterns behind results from studies of physician interaction with computer-based systems in critical care medicine (e.g., Moll van Charante et al., 1993; Obradovich and Woods, 1996; Cook and Woods, 1996). Many of the results and implications of this kind of research are synthesized and discussed in two comprehensive volumes, Billings (1996) and Woods et al. (1994). This paper summarizes the pattern that has emerged from our research, related research, incident reports, and accident investigations. It uses this new understanding of why problems arise to point to new investment strategies that can help us deal with the perceived "human error" problem, make automation more of a team player, and maintain and improve safety.

A continuum of sociotechnical requirements for patient-centered problem lists.

PubMed

Collins, Sarah; Tsivkin, Kira; Hongsermeier, Tonya; Dubois, David; Nandigam, Hari Krishna; Rocha, Roberto A

2013-01-01

Specific requirements for patient-centered health information technology remain ill-defined. To create operational definitions of patient-centered problem lists, we propose a continuum of sociotechnical requirements with five stages: 1) Intradisciplinary Care Planning: Viewing and searching for problems by discipline; 2) Multi-disciplinary Care Planning: Categorizing problem states to meet discipline-specific needs; 3) Interdisciplinary Care Planning: Sharing and linking problems between disciplines; 4) Integrated and Coordinated Care Planning: Associating problems with assessments, tasks, interventions and outcomes across disciplines for coordination, knowledge development, and reporting; and 5) Patient-Centered Care Planning: Engaging patients in identification of problems and maintenance of their problem list.

Autopilot, Mind Wandering, and the Out of the Loop Performance Problem

PubMed Central

Gouraud, Jonas; Delorme, Arnaud; Berberian, Bruno

2017-01-01

To satisfy the increasing demand for safer critical systems, engineers have integrated higher levels of automation, such as glass cockpits in aircraft, power plants, and driverless cars. These guiding principles relegate the operator to a monitoring role, increasing risks for humans to lack system understanding. The out of the loop performance problem arises when operators suffer from complacency and vigilance decrement; consequently, when automation does not behave as expected, understanding the system or taking back manual control may be difficult. Close to the out of the loop problem, mind wandering points to the propensity of the human mind to think about matters unrelated to the task at hand. This article reviews the literature related to both mind wandering and the out of the loop performance problem as it relates to task automation. We highlight studies showing how these phenomena interact with each other while impacting human performance within highly automated systems. We analyze how this proximity is supported by effects observed in automated environment, such as decoupling, sensory attention, and cognitive comprehension decrease. We also show that this link could be useful for detecting out of the loop situations through mind wandering markers. Finally, we examine the limitations of the current knowledge because many questions remain open to characterize interactions between out of the loop, mind wandering, and automation. PMID:29051723

Automated telescope scheduling

NASA Technical Reports Server (NTRS)

Johnston, Mark D.

1988-01-01

With the ever increasing level of automation of astronomical telescopes the benefits and feasibility of automated planning and scheduling are becoming more apparent. Improved efficiency and increased overall telescope utilization are the most obvious goals. Automated scheduling at some level has been done for several satellite observatories, but the requirements on these systems were much less stringent than on modern ground or satellite observatories. The scheduling problem is particularly acute for Hubble Space Telescope: virtually all observations must be planned in excruciating detail weeks to months in advance. Space Telescope Science Institute has recently made significant progress on the scheduling problem by exploiting state-of-the-art artificial intelligence software technology. What is especially interesting is that this effort has already yielded software that is well suited to scheduling groundbased telescopes, including the problem of optimizing the coordinated scheduling of more than one telescope.

Multi-Agent Information Classification Using Dynamic Acquaintance Lists.

ERIC Educational Resources Information Center

Mukhopadhyay, Snehasis; Peng, Shengquan; Raje, Rajeev; Palakal, Mathew; Mostafa, Javed

2003-01-01

Discussion of automated information services focuses on information classification and collaborative agents, i.e. intelligent computer programs. Highlights include multi-agent systems; distributed artificial intelligence; thesauri; document representation and classification; agent modeling; acquaintances, or remote agents discovered through…

Genetic algorithms in teaching artificial intelligence (automated generation of specific algebras)

NASA Astrophysics Data System (ADS)

Habiballa, Hashim; Jendryscik, Radek

2017-11-01

The problem of teaching essential Artificial Intelligence (AI) methods is an important task for an educator in the branch of soft-computing. The key focus is often given to proper understanding of the principle of AI methods in two essential points - why we use soft-computing methods at all and how we apply these methods to generate reasonable results in sensible time. We present one interesting problem solved in the non-educational research concerning automated generation of specific algebras in the huge search space. We emphasize above mentioned points as an educational case study of an interesting problem in automated generation of specific algebras.

Alignment of Automation and Communications Functions of Army Agencies and Commands.

DTIC Science & Technology

1980-07-31

strategic sub-network, the Army is not the primary designer or developer of the WWMCCS system. Since most of the backbone system is within the strategic...of this problem, it is felt that a policy void is the primary overriding cause of the problem. 53 IMPACT OF PROBLEM: 1. Potential to achieve economies...Battlefield Automation Appraisal (BAA IV) perceived a problem which is stated as follows: DARCOM and USACSC are currently the two primary materiel

Production system chunking in SOAR: Case studies in automated learning

NASA Technical Reports Server (NTRS)

Allen, Robert

1989-01-01

A preliminary study of SOAR, a general intelligent architecture for automated problem solving and learning, is presented. The underlying principles of universal subgoaling and chunking were applied to a simple, yet representative, problem in artificial intelligence. A number of problem space representations were examined and compared. It is concluded that learning is an inherent and beneficial aspect of problem solving. Additional studies are suggested in domains relevant to mission planning and to SOAR itself.

Photochemical numerics for global-scale modeling: Fidelity and GCM testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, S.; Jim Kao, Chih-Yue; Zhao, X.

1995-03-01

Atmospheric photochemistry lies at the heart of global-scale pollution problems, but it is a nonlinear system embedded in nonlinear transport and so must be modeled in three dimensions. Total earth grids are massive and kinetics require dozens of interacting tracers, taxing supercomputers to their limits in global calculations. A matrix-free and noniterative family scheme is described that permits chemical step sizes an order of magnitude or more larger than time constants for molecular groupings, in the 1-h range used for transport. Families are partitioned through linearized implicit integrations that produce stabilizing species concentrations for a mass-conserving forward solver. The kineticsmore » are also parallelized by moving geographic loops innermost and changes in the continuity equations are automated through list reading. The combination of speed, parallelization and automation renders the programs naturally modular. Accuracy lies within 1% for all species in week-long fidelity tests. A 50-species, 150-reaction stratospheric module tested in a spectral GCM benchmarks at 10 min CPU time per day and agrees with lower-dimensionality simulations. Tropospheric nonmethane hydrocarbon chemistry will soon be added, and inherently three-dimensional phenomena will be investigated both decoupled from dynamics and in a complete chemical GCM. 225 refs., 11 figs., 2 tabs.« less

Automated Turn-Key Systems in the Library: Prospects and Perils

ERIC Educational Resources Information Center

Brownrigg, Edwin Blake; Bruer, J. Michael

1976-01-01

Problems, issues, and alternatives in designing individual, stand alone systems for servicing selected library operations, with emphasis on problems of integrating these with major automated systems, a new mode of operation called coupling, and strategies for dealing with large amounts of retrospective data. (Author/LS)

NOAA Weather Radio

Science.gov Websites

Information Reception Problems NWR Alarms Automated Voices FIPS Codes NWR - Special Needs SAME USING SAME SAME does not make an audible beep. However, it will display the words "CHECK RECEPTION" until it Reception Problems General Information NWR Alarms FIPS Codes Automated Voices Spanish Voices Public

The administrative window into the integrated DBMS

NASA Technical Reports Server (NTRS)

Brock, G. H.

1984-01-01

A good office automation system manned by a team of facilitators seeking opportunities to serve end users could go a long way toward defining a DBMS that serves management. The problems of DBMS organization, alternative approaches to solving some of the major problems, problems that may have no solution, and how office automation fits into the development of the manager's management information system are discussed.

An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept.

PubMed

Wehage, Kristopher; Chenhansa, Panan; Schoenung, Julie M

2017-01-01

GreenScreen® for Safer Chemicals is a framework for comparative chemical hazard assessment. It is the first transparent, open and publicly accessible framework of its kind, allowing manufacturers and governmental agencies to make informed decisions about the chemicals and substances used in consumer products and buildings. In the GreenScreen® benchmarking process, chemical hazards are assessed and classified based on 18 hazard endpoints from up to 30 different sources. The result is a simple numerical benchmark score and accompanying assessment report that allows users to flag chemicals of concern and identify safer alternatives. Although the screening process is straightforward, aggregating and sorting hazard data is tedious, time-consuming, and prone to human error. In light of these challenges, the present work demonstrates the usage of automation to cull chemical hazard data from publicly available internet resources, assign metadata, and perform a GreenScreen® hazard assessment using the GreenScreen® "List Translator." The automated technique, written as a module in the Python programming language, generates GreenScreen® List Translation data for over 3000 chemicals in approximately 30 s. Discussion of the potential benefits and limitations of automated techniques is provided. By embedding the library into a web-based graphical user interface, the extensibility of the library is demonstrated. The accompanying source code is made available to the hazard assessment community. Integr Environ Assess Manag 2017;13:167-176. © 2016 SETAC. © 2016 SETAC.

[Problems with placement and using of automated external defibrillators in Czech Republic].

PubMed

Olos, Tomás; Bursa, Filip; Gregor, Roman; Holes, David

2011-01-01

The use of automated external defibrillators improves the survival of adults who suffer from cardiopulmonary arrest. Automated external defibrillators detect ventricular fibrillation with almost perfect sensitivity and specificity. Authors describe the use of automated external defibrillator during cardiopulmonary resuscitation in a patient with sudden cardiac arrest during ice-hockey match. The article reports also the use of automated external defibrillators in children.

Software Development for Automation of Space- and Time- Varying Pressurization on Small Caliber Gun Barrels

DTIC Science & Technology

2007-08-01

PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including...PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1 . REPORT DATE (DD-MM-YYYY) August 2007 2. REPORT TYPE Final 3. DATES COVERED (From...Z39.18 iii Contents List of Figures iv List of Tables iv Acknowledgments v 1 . Introduction 1 2. Functional Requirements and Use Cases 2 3

Physiological Self-Regulation and Adaptive Automation

NASA Technical Reports Server (NTRS)

Prinzell, Lawrence J.; Pope, Alan T.; Freeman, Frederick G.

2007-01-01

Adaptive automation has been proposed as a solution to current problems of human-automation interaction. Past research has shown the potential of this advanced form of automation to enhance pilot engagement and lower cognitive workload. However, there have been concerns voiced regarding issues, such as automation surprises, associated with the use of adaptive automation. This study examined the use of psychophysiological self-regulation training with adaptive automation that may help pilots deal with these problems through the enhancement of cognitive resource management skills. Eighteen participants were assigned to 3 groups (self-regulation training, false feedback, and control) and performed resource management, monitoring, and tracking tasks from the Multiple Attribute Task Battery. The tracking task was cycled between 3 levels of task difficulty (automatic, adaptive aiding, manual) on the basis of the electroencephalogram-derived engagement index. The other two tasks remained in automatic mode that had a single automation failure. Those participants who had received self-regulation training performed significantly better and reported lower National Aeronautics and Space Administration Task Load Index scores than participants in the false feedback and control groups. The theoretical and practical implications of these results for adaptive automation are discussed.

Panel Sessions.

ERIC Educational Resources Information Center

Proceedings of the ASIS Mid-Year Meeting, 1992

1992-01-01

Lists the speakers and summarizes the issues addressed for 12 panel sessions on topics related to networking, including libraries and national networks, federal national resources and energy programs, multimedia issues, telecommuting, remote image serving, accessing the Internet, library automation, scientific information, applications of Z39.50,…

Ground Truth Creation for Complex Clinical NLP Tasks - an Iterative Vetting Approach and Lessons Learned.

PubMed

Liang, Jennifer J; Tsou, Ching-Huei; Devarakonda, Murthy V

2017-01-01

Natural language processing (NLP) holds the promise of effectively analyzing patient record data to reduce cognitive load on physicians and clinicians in patient care, clinical research, and hospital operations management. A critical need in developing such methods is the "ground truth" dataset needed for training and testing the algorithms. Beyond localizable, relatively simple tasks, ground truth creation is a significant challenge because medical experts, just as physicians in patient care, have to assimilate vast amounts of data in EHR systems. To mitigate potential inaccuracies of the cognitive challenges, we present an iterative vetting approach for creating the ground truth for complex NLP tasks. In this paper, we present the methodology, and report on its use for an automated problem list generation task, its effect on the ground truth quality and system accuracy, and lessons learned from the effort.

Increasing patient engagement: patients' responses to viewing problem lists online.

PubMed

Wright, A; Feblowitz, J; Maloney, F L; Henkin, S; Ramelson, H; Feltman, J; Bates, D W

2014-01-01

To characterize the opinions, emotions, and actions taken by patients who viewed their electronic problem list via an online personal health record (PHR). An online survey of patients who viewed their problem lists, as maintained by their healthcare provider, in a web-based PHR linked to an electronic health record for the first time. A total 3,649 patients completed the survey, yielding a response rate of 42.1%. Patient attitudes towards the problem list function were positive overall, with 90.4% rating it at least somewhat useful and 86.7% reporting they would probably or definitely use it again. Nearly half (45.6%) of patients identified at least one major or minor problem missing from their list. After viewing the list, 56.1% of patients reported taking at least one action in response, with 32.4% of patients reporting that they researched a condition on the Internet, 18.3% reported that they contacted their healthcare provider and 16.7% reported changing or planning to change a health behavior (patients could report multiple actions). 64.7% of patients reported feeling at least somewhat happy while viewing their problem list, though others reported feeling sad (30.4%), worried (35.7%) or scared (23.8%) (patients could report multiple emotions). A smaller number of patients reported feeling angry (16.6%) or ashamed (14.3%). Patients who experienced an emotional response were more likely to take action. Overall, patients found the ability to view their problem lists very useful and took action in response to the information. However, some had negative emotions. More research is needed into optimal strategies for supporting patients receiving this information.

Automation in astronomy.

NASA Technical Reports Server (NTRS)

Wampler, E. J.

1972-01-01

Description and evaluation of the remotely operated Lick Observatory Cassegrain focus of the 120-inch telescope. The experience with this instrument has revealed that an automated system can profoundly change the observer's approach to his work. This makes it difficult to evaluate the 'advantage' of an automated telescope over a conventional instrument. Some of the problems arising with automation in astronomy are discussed.

The Role of Robots and Automation in Space

NASA Technical Reports Server (NTRS)

Heer, E.

1978-01-01

Advanced space transportation systems based on the shuttle and interim upper stage will open the way to the use of large-scale industrial and commercial systems in space. The role of robot and automation technology in the cost-effective implementation and operation of such systems in the next two decades is discussed. Planning studies initiated by NASA are described as applied to space exploration, global services, and space industrialization, and a forecast of potential missions in each category is presented. The appendix lists highlights of space robot technology from 1967 to the present.

The Changing Environment of Personal Information Systems.

ERIC Educational Resources Information Center

Burton, Hilary D.

1985-01-01

Discusses technological developments causing changes in personal information systems: increase in commercial support services; proliferation of microcomputers; capability to download from secondary services into private files; and developing desire to utilize functions such as electronic mail and automated office functions. Appendices list 21…

Problems and Failures in Library Automation.

ERIC Educational Resources Information Center

Lancaster, F. Wilfrid, Ed.

Drawn from the 15th Annual Clinic on Library Applications of Data Processing, held at the University of Illinois at Urbana-Champaign, the nine papers presented in this volume deal with problems--or, in some cases, downright failures--in the automation of various facets of library service. They range from a general survey of failures or limitations…

GIDEP Batching Tool

NASA Technical Reports Server (NTRS)

Fong, Danny; Odell,Dorice; Barry, Peter; Abrahamian, Tomik

2008-01-01

This software provides internal, automated search mechanics of GIDEP (Government- Industry Data Exchange Program) Alert data imported from the GIDEP government Web site. The batching tool allows the import of a single parts list in tab-delimited text format into the local JPL GIDEP database. Delimiters from every part number are removed. The original part numbers with delimiters are compared, as well as the newly generated list without the delimiters. The two lists run against the GIDEP imports, and output any matches. This feature only works with Netscape 2.0 or greater, or Internet Explorer 4.0 or greater. The user selects the browser button to choose a text file to import. When the submit button is pressed, this script will import alerts from the text file into the local JPL GIDEP database. This batch tool provides complete in-house control over exported material and data for automated batch match abilities. The batching tool has the ability to match capabilities of the parts list to tables, and yields results that aid further research and analysis. This provides more control over GIDEP information for metrics and reports information not provided by the government site. This software yields results quickly and gives more control over external data from the government site in order to generate other reports not available from the external source. There is enough space to store years of data. The program relates to risk identification and management with regard to projects and GIDEP alert information encompassing flight parts for space exploration.

The terminal area automated path generation problem

NASA Technical Reports Server (NTRS)

Hsin, C.-C.

1977-01-01

The automated terminal area path generation problem in the advanced Air Traffic Control System (ATC), has been studied. Definitions, input, output and the interrelationships with other ATC functions have been discussed. Alternatives in modeling the problem have been identified. Problem formulations and solution techniques are presented. In particular, the solution of a minimum effort path stretching problem (path generation on a given schedule) has been carried out using the Newton-Raphson trajectory optimization method. Discussions are presented on the effect of different delivery time, aircraft entry position, initial guess on the boundary conditions, etc. Recommendations are made on real-world implementations.

Relay Protection and Automation Systems Based on Programmable Logic Integrated Circuits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lashin, A. V., E-mail: LashinAV@lhp.ru; Kozyrev, A. V.

One of the most promising forms of developing the apparatus part of relay protection and automation devices is considered. The advantages of choosing programmable logic integrated circuits to obtain adaptive technological algorithms in power system protection and control systems are pointed out. The technical difficulties in the problems which today stand in the way of using relay protection and automation systems are indicated and a new technology for solving these problems is presented. Particular attention is devoted to the possibility of reconfiguring the logic of these devices, using programmable logic integrated circuits.

Adaptive Technologies for Accommodating Persons with Disabilities.

ERIC Educational Resources Information Center

Berliss, Jane; And Others

1993-01-01

Eight articles review the progress achieved in making library computing technologies and library services accessible to people with disabilities. Adaptive technologies, automated conversion into Braille, and successful programs that demonstrate compliance with the American with Disabilities Act are described. A resource list is included. (EA)

SCOPE in Cataloguing.

ERIC Educational Resources Information Center

Tom, Ellen; Reed, Sue

This report describes the Systematic Computerized Processing in Cataloguing system (SCOPE), an automated system for the catalog department of a university library. The system produces spine labels, pocket labels, book cards for the circulation system, catalog cards including shelf list, main entry, subject and added entry cards, statistics, an…

Selected Instrumentation Films, 1969-1970.

ERIC Educational Resources Information Center

Simmons, Raymond L., Ed.

This list of currently available films and filmstrips pertinent to instrumentation has been compiled from information solicited from many government and private sources. The 1969 compilation has been organized into the following eight categories: (1) principles of measurement and basic measurements; (2) analysis instrumentation; (3) automation and…

A Methodology for Assessing and Ranking Ballistic Missile Defense Technologies Using a System Performance Index

DTIC Science & Technology

2002-07-29

suggestions, and guidance concerning the technology assessment process. References 1. Using ACEIT for Total Ownership Cost Modeling and Analysis...2001 World Population Data Sheet, Population Reference Bureau, Washington, DC List of Acronyms ACEIT – Automated Cost Estimating Integrated

Proteomics wants cRacker: automated standardized data analysis of LC-MS derived proteomic data.

PubMed

Zauber, Henrik; Schulze, Waltraud X

2012-11-02

The large-scale analysis of thousands of proteins under various experimental conditions or in mutant lines has gained more and more importance in hypothesis-driven scientific research and systems biology in the past years. Quantitative analysis by large scale proteomics using modern mass spectrometry usually results in long lists of peptide ion intensities. The main interest for most researchers, however, is to draw conclusions on the protein level. Postprocessing and combining peptide intensities of a proteomic data set requires expert knowledge, and the often repetitive and standardized manual calculations can be time-consuming. The analysis of complex samples can result in very large data sets (lists with several 1000s to 100,000 entries of different peptides) that cannot easily be analyzed using standard spreadsheet programs. To improve speed and consistency of the data analysis of LC-MS derived proteomic data, we developed cRacker. cRacker is an R-based program for automated downstream proteomic data analysis including data normalization strategies for metabolic labeling and label free quantitation. In addition, cRacker includes basic statistical analysis, such as clustering of data, or ANOVA and t tests for comparison between treatments. Results are presented in editable graphic formats and in list files.

Automated Information Security Will Not Improve until Effectively Supported by IRM.

ERIC Educational Resources Information Center

Chick, Morey J.

1989-01-01

The first of two articles on the nature of the growing problem of automated information systems security, especially in the federal government, this article presents a brief history of the problem and describes the need for integrating security activities into overall policies and programs to help reduce system vulnerabilities and risks. (23…

Machine vision for various manipulation tasks

NASA Astrophysics Data System (ADS)

Domae, Yukiyasu

2017-03-01

Bin-picking, re-grasping, pick-and-place, kitting, etc. There are many manipulation tasks in the fields of automation of factory, warehouse and so on. The main problem of the automation is that the target objects (items/parts) have various shapes, weights and surface materials. In my talk, I will show latest machine vision systems and algorithms against the problem.

THE IMPACT OF TECHNOLOGICAL CHANGE IN THE MEATPACKING INDUSTRY. AUTOMATION PROGRAM REPORT, NUMBER 1.

ERIC Educational Resources Information Center

DICK, WILLIAM G.

TWENTY AUTOMATION MANPOWER SERVICES DEMONSTRATION PROJECTS WERE STARTED TO PROVIDE EXPERIENCE WITH JOB MARKET PROBLEMS CAUSED BY CHANGING TECHNOLOGY AND MASS LAYOFFS. THE FIRST OF THE SERIES, ESTABLISHED IN LOCAL PUBLIC EMPLOYMENT SERVICE OFFICES, THIS PROJECT DEALT WITH THE LAYOFF OF 675 WORKERS, PROBLEMS OF READJUSTMENT IN THE PLANT, THE…

Automated Consultation for the Diagnosis of Interplanetary Telecommunications

NASA Technical Reports Server (NTRS)

Quan, A. G.; Schwuttke, U. M.; Herstein, J. S.; Spagnuolo, J. S.; Burleigh, S.

1995-01-01

SHARP (Spacecraft Health Automated Reasoning Program) is a knowledge-based system for the diagnosis of problems in NASA's Deep Space Network (DSN) telecommunications system. This system provides the means of communication between a spacecraft and operations personnel at Jet Propulsion Laboratory. SHARP analyzes problems that occur in both the on-board spacecraft telecom subsystem, and the DSN.

Automation U.S.A.: Overcoming Barriers to Automation.

ERIC Educational Resources Information Center

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

Cost-utility of an internet-based intervention with or without therapist support in comparison with a waiting list for individuals with eating disorder symptoms: a randomized controlled trial.

PubMed

Aardoom, J J; Dingemans, A E; van Ginkel, J R; Spinhoven, P; Van Furth, E F; Van den Akker-van Marle, M E

2016-12-01

To investigate the cost-utility of the internet-based intervention "Featback" provided with different levels of therapist support, in comparison to a waiting list. This economic evaluation was conducted from a societal perspective and was part of a randomized controlled trial in which participants (N = 354) with self-reported ED symptoms were randomized to: (1) 8 weeks of Featback, consisting of psychoeducation and a fully automated monitoring- and feedback system, (2) Featback with low-intensity (weekly) therapist support, (3) Featback with high-intensity (three times a week) therapist support, and (4) a waiting list. Participants were assessed at baseline, postintervention, and 3-month follow-up. Cost-utility acceptability curves were constructed. No significant differences between the study conditions were found regarding quality-adjusted life-years (P = 0.55) and societal costs (P = 0.45), although the mean costs per participant were lowest in the Featback condition with low-intensity therapist support (€1951), followed by Featback with high-intensity therapist support (€2032), Featback without therapist support (€2102), and the waiting list (€2582). Featback seemed to be cost-effective as compared to the waiting list. No clear preference was found for Featback with or without therapist support. A fully automated Internet-based intervention for ED symptoms with no, low-, or high-intensity therapist support represented good value for money when compared to a waiting list. This finding may have important implications for clinical practice, as both the unguided- and guided intervention could allow for more efficient care and widespread dissemination, potentially increasing the accessibility and availability of mental health care services for individuals with ED symptoms. © 2016 Wiley Periodicals, Inc. (Int J Eat Disord 2016; 49:1068-1076). © 2016 Wiley Periodicals, Inc.

A new algorithm for reliable and general NMR resonance assignment.

PubMed

Schmidt, Elena; Güntert, Peter

2012-08-01

The new FLYA automated resonance assignment algorithm determines NMR chemical shift assignments on the basis of peak lists from any combination of multidimensional through-bond or through-space NMR experiments for proteins. Backbone and side-chain assignments can be determined. All experimental data are used simultaneously, thereby exploiting optimally the redundancy present in the input peak lists and circumventing potential pitfalls of assignment strategies in which results obtained in a given step remain fixed input data for subsequent steps. Instead of prescribing a specific assignment strategy, the FLYA resonance assignment algorithm requires only experimental peak lists and the primary structure of the protein, from which the peaks expected in a given spectrum can be generated by applying a set of rules, defined in a straightforward way by specifying through-bond or through-space magnetization transfer pathways. The algorithm determines the resonance assignment by finding an optimal mapping between the set of expected peaks that are assigned by definition but have unknown positions and the set of measured peaks in the input peak lists that are initially unassigned but have a known position in the spectrum. Using peak lists obtained by purely automated peak picking from the experimental spectra of three proteins, FLYA assigned correctly 96-99% of the backbone and 90-91% of all resonances that could be assigned manually. Systematic studies quantified the impact of various factors on the assignment accuracy, namely the extent of missing real peaks and the amount of additional artifact peaks in the input peak lists, as well as the accuracy of the peak positions. Comparing the resonance assignments from FLYA with those obtained from two other existing algorithms showed that using identical experimental input data these other algorithms yielded significantly (40-142%) more erroneous assignments than FLYA. The FLYA resonance assignment algorithm thus has the reliability and flexibility to replace most manual and semi-automatic assignment procedures for NMR studies of proteins.

Arcnet(R) On-Fiber -- A Viable Factory Automation Alternative

NASA Astrophysics Data System (ADS)

Karlin, Geof; Tucker, Carol S.

1987-01-01

Manufacturers need to improve their operating methods and increase their productivity so they can compete successfully in the marketplace. This goal can be achieved through factory automation, and the key to this automation is successful data base management and factory integration. However, large scale factory automation and integration requires effective communications, and this has given rise to an interest in various Local Area Networks or LANs. In a completely integrated and automated factory, the entire organization must have access to the data base, and all departments and functions must be able to communicate with each other. Traditionally, these departments and functions use incompatible equipment, and the ability to make such equipment communicate presents numerous problems. ARCNET, a token-passing LAN which has a significant presence in the office environment today, coupled with fiber optic cable, the cable of the future, provide an effective, low-cost solution to a number of these problems.

Combinatorial Tasks and Outcome Listing: Examining Productive Listing among Undergraduate Students

ERIC Educational Resources Information Center

Lockwood, Elise; Gibson, Bryan R.

2016-01-01

Although counting problems are easy to state and provide rich, accessible problem-solving situations, there is much evidence that students struggle with solving counting problems correctly. With combinatorics (and the study of counting problems) becoming increasingly prevalent in K-12 and undergraduate curricula, there is a need for researchers to…

Automated Engineering Design (AED); An approach to automated documentation

NASA Technical Reports Server (NTRS)

Mcclure, C. W.

1970-01-01

The automated engineering design (AED) is reviewed, consisting of a high level systems programming language, a series of modular precoded subroutines, and a set of powerful software machine tools that effectively automate the production and design of new languages. AED is used primarily for development of problem and user-oriented languages. Software production phases are diagramed, and factors which inhibit effective documentation are evaluated.

Automated processing of endoscopic surgical instruments.

PubMed

Roth, K; Sieber, J P; Schrimm, H; Heeg, P; Buess, G

1994-10-01

This paper deals with the requirements for automated processing of endoscopic surgical instruments. After a brief analysis of the current problems, solutions are discussed. Test-procedures have been developed to validate the automated processing, so that the cleaning results are guaranteed and reproducable. Also a device for testing and cleaning was designed together with Netzsch Newamatic and PCI, called TC-MIC, to automate processing and reduce manual work.

Modeling and deadlock avoidance of automated manufacturing systems with multiple automated guided vehicles.

PubMed

Wu, Naiqi; Zhou, MengChu

2005-12-01

An automated manufacturing system (AMS) contains a number of versatile machines (or workstations), buffers, an automated material handling system (MHS), and is computer-controlled. An effective and flexible alternative for implementing MHS is to use automated guided vehicle (AGV) system. The deadlock issue in AMS is very important in its operation and has extensively been studied. The deadlock problems were separately treated for parts in production and transportation and many techniques were developed for each problem. However, such treatment does not take the advantage of the flexibility offered by multiple AGVs. In general, it is intractable to obtain maximally permissive control policy for either problem. Instead, this paper investigates these two problems in an integrated way. First we model an AGV system and part processing processes by resource-oriented Petri nets, respectively. Then the two models are integrated by using macro transitions. Based on the combined model, a novel control policy for deadlock avoidance is proposed. It is shown to be maximally permissive with computational complexity of O (n2) where n is the number of machines in AMS if the complexity for controlling the part transportation by AGVs is not considered. Thus, the complexity of deadlock avoidance for the whole system is bounded by the complexity in controlling the AGV system. An illustrative example shows its application and power.

MannDB: A microbial annotation database for protein characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, C; Lam, M; Smith, J

2006-05-19

MannDB was created to meet a need for rapid, comprehensive automated protein sequence analyses to support selection of proteins suitable as targets for driving the development of reagents for pathogen or protein toxin detection. Because a large number of open-source tools were needed, it was necessary to produce a software system to scale the computations for whole-proteome analysis. Thus, we built a fully automated system for executing software tools and for storage, integration, and display of automated protein sequence analysis and annotation data. MannDB is a relational database that organizes data resulting from fully automated, high-throughput protein-sequence analyses using open-sourcemore » tools. Types of analyses provided include predictions of cleavage, chemical properties, classification, features, functional assignment, post-translational modifications, motifs, antigenicity, and secondary structure. Proteomes (lists of hypothetical and known proteins) are downloaded and parsed from Genbank and then inserted into MannDB, and annotations from SwissProt are downloaded when identifiers are found in the Genbank entry or when identical sequences are identified. Currently 36 open-source tools are run against MannDB protein sequences either on local systems or by means of batch submission to external servers. In addition, BLAST against protein entries in MvirDB, our database of microbial virulence factors, is performed. A web client browser enables viewing of computational results and downloaded annotations, and a query tool enables structured and free-text search capabilities. When available, links to external databases, including MvirDB, are provided. MannDB contains whole-proteome analyses for at least one representative organism from each category of biological threat organism listed by APHIS, CDC, HHS, NIAID, USDA, USFDA, and WHO. MannDB comprises a large number of genomes and comprehensive protein sequence analyses representing organisms listed as high-priority agents on the websites of several governmental organizations concerned with bio-terrorism. MannDB provides the user with a BLAST interface for comparison of native and non-native sequences and a query tool for conveniently selecting proteins of interest. In addition, the user has access to a web-based browser that compiles comprehensive and extensive reports.« less

Automated analysis and reannotation of subcellular locations in confocal images from the Human Protein Atlas.

PubMed

Li, Jieyue; Newberg, Justin Y; Uhlén, Mathias; Lundberg, Emma; Murphy, Robert F

2012-01-01

The Human Protein Atlas contains immunofluorescence images showing subcellular locations for thousands of proteins. These are currently annotated by visual inspection. In this paper, we describe automated approaches to analyze the images and their use to improve annotation. We began by training classifiers to recognize the annotated patterns. By ranking proteins according to the confidence of the classifier, we generated a list of proteins that were strong candidates for reexamination. In parallel, we applied hierarchical clustering to group proteins and identified proteins whose annotations were inconsistent with the remainder of the proteins in their cluster. These proteins were reexamined by the original annotators, and a significant fraction had their annotations changed. The results demonstrate that automated approaches can provide an important complement to visual annotation.

OVERVIEW OF TOTAL MAXIMUM DAILY LOAD (TMDL) PROBLEM AND SUPPORTING MODEL DEVELOPMENT

EPA Science Inventory

Approximately 18,900 impaired water bodies are on the 303(b) state lists required by the Clean Water Act. Of the 300 types of impairments on the 1996 and 1998 lists, 24% involve sediments, suspended solids, or turbidity. Nutrient problems account for 15% of the listings, and path...

Automation of University Libraries in Kerala: Status, Problems and Prospects

ERIC Educational Resources Information Center

Suku, J.; Pillai, Mini G.

2005-01-01

This paper discusses the present scenario of automation activities of university libraries in Kerala. The survey findings mainly cover various aspects of library automation such as information technology infrastructure, in-house activities, information services and their usage, manpower development, and budget. The paper briefly describes the role…

Caveats, Qualms, and Quibbles: A Revisionist View of Library Automation.

ERIC Educational Resources Information Center

Cart, Michael

1987-01-01

Describes problems in the current state of library automation, including too much jargon, excessive costs, excessive implementation time, and systems that don't work. An example is given of one public library's conservative approach to library automation which husbands resources for the maintenance and expansion of print collections and…

Translation: Aids, Robots, and Automation.

ERIC Educational Resources Information Center

Andreyewsky, Alexander

1981-01-01

Examines electronic aids to translation both as ways to automate it and as an approach to solve problems resulting from shortage of qualified translators. Describes the limitations of robotic MT (Machine Translation) systems, viewing MAT (Machine-Aided Translation) as the only practical solution and the best vehicle for further automation. (MES)

Fire Protection. Honeywell Planning Guide.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

A general discussion of fire alarms and protection is provided by a manufacturer of automated monitoring and control systems. Background information describes old and new fire alarm systems, comparing system components, wage savings, and cost analysis. Different kinds of automatic systems are listed, including--(1) local system, (2) auxiliary…

Ready To Buy a Computer?

ERIC Educational Resources Information Center

Rourke, Martha; Rourke, Patrick

1974-01-01

The school district business manager can make sound, cost-conscious decisions in the purchase of computer equipment by developing a list of cost-justified applications for automation, considering the software, writing performance specifications for bidding or negotiating a contract, and choosing the vendor wisely prior to the purchase; and by…

Preparing for the Millennium.

ERIC Educational Resources Information Center

Scaglione, Chris

1998-01-01

In 2000, any automated system that processes dates may stop working completely or produce unexpected or unwanted results. School administrators should obtain a complete listing of all currently used systems, prioritize them, contact hardware and software providers to verify Y2K compliance, develop resolution plans with vendors, develop assessment…

Data base to compare calculations and observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tichler, J.L.

Meteorological and climatological data bases were compared with known tritium release points and diffusion calculations to determine if calculated concentrations could replace measure concentrations at the monitoring stations. Daily tritium concentrations were monitored at 8 stations and 16 possible receptors. Automated data retrieval strategies are listed. (PSB)

38 CFR 1.602 - Utilization of access.

Code of Federal Regulations, 2010 CFR

2010-07-01

... individual and organization will comply with all security requirements VBA deems necessary to ensure the integrity and confidentiality of the data and VBA's automated computer systems. (b) An organization granted... regular, adequate training on proper security, including the items listed in § 1.603(a). Where an...

38 CFR 1.602 - Utilization of access.

Code of Federal Regulations, 2011 CFR

2011-07-01

... individual and organization will comply with all security requirements VBA deems necessary to ensure the integrity and confidentiality of the data and VBA's automated computer systems. (b) An organization granted... regular, adequate training on proper security, including the items listed in § 1.603(a). Where an...

38 CFR 1.602 - Utilization of access.

Code of Federal Regulations, 2014 CFR

2014-07-01

... individual and organization will comply with all security requirements VBA deems necessary to ensure the integrity and confidentiality of the data and VBA's automated computer systems. (b) An organization granted... regular, adequate training on proper security, including the items listed in § 1.603(a). Where an...

38 CFR 1.602 - Utilization of access.

Code of Federal Regulations, 2012 CFR

2012-07-01

... individual and organization will comply with all security requirements VBA deems necessary to ensure the integrity and confidentiality of the data and VBA's automated computer systems. (b) An organization granted... regular, adequate training on proper security, including the items listed in § 1.603(a). Where an...

77 FR 18869 - Cable Statutory License: Specialty Station List

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

.... Sandros, Deputy General Counsel, Copyright GC/I&R, P.O. Box 70400, Southwest Station, Washington, DC 20024... television broadcast station that generally carries foreign-language, religious, and/or automated programming... Office attesting to the fact that the station's programming comports with the 1981 FCC definition, and...

Parameterized Complexity Results for General Factors in Bipartite Graphs with an Application to Constraint Programming

NASA Astrophysics Data System (ADS)

Gutin, Gregory; Kim, Eun Jung; Soleimanfallah, Arezou; Szeider, Stefan; Yeo, Anders

The NP-hard general factor problem asks, given a graph and for each vertex a list of integers, whether the graph has a spanning subgraph where each vertex has a degree that belongs to its assigned list. The problem remains NP-hard even if the given graph is bipartite with partition U ⊎ V, and each vertex in U is assigned the list {1}; this subproblem appears in the context of constraint programming as the consistency problem for the extended global cardinality constraint. We show that this subproblem is fixed-parameter tractable when parameterized by the size of the second partite set V. More generally, we show that the general factor problem for bipartite graphs, parameterized by |V |, is fixed-parameter tractable as long as all vertices in U are assigned lists of length 1, but becomes W[1]-hard if vertices in U are assigned lists of length at most 2. We establish fixed-parameter tractability by reducing the problem instance to a bounded number of acyclic instances, each of which can be solved in polynomial time by dynamic programming.

Exploring the Use of a Test Automation Framework

NASA Technical Reports Server (NTRS)

Cervantes, Alex

2009-01-01

It is known that software testers, more often than not, lack the time needed to fully test the delivered software product within the time period allotted to them. When problems in the implementation phase of a development project occur, it normally causes the software delivery date to slide. As a result, testers either need to work longer hours, or supplementary resources need to be added to the test team in order to meet aggressive test deadlines. One solution to this problem is to provide testers with a test automation framework to facilitate the development of automated test solutions.

CPS-Rater: Automated Sequential Annotation for Conversations in Collaborative Problem-Solving Activities. Research Report. ETS RR-17-58

ERIC Educational Resources Information Center

Hao, Jiangang; Chen, Lei; Flor, Michael; Liu, Lei; von Davier, Alina A.

2017-01-01

Conversations in collaborative problem-solving activities can be used to probe the collaboration skills of the team members. Annotating the conversations into different collaboration skills by human raters is laborious and time consuming. In this report, we report our work on developing an automated annotation system, CPS-rater, for conversational…

Rapid classification of landsat TM imagery for phase 1 stratification using the automated NDVI threshold supervised classification (ANTSC) methodology

Treesearch

William H. Cooke; Dennis M. Jacobs

2002-01-01

FIA annual inventories require rapid updating of pixel-based Phase 1 estimates. Scientists at the Southern Research Station are developing an automated methodology that uses a Normalized Difference Vegetation Index (NDVI) for identifying and eliminating problem FIA plots from the analysis. Problem plots are those that have questionable land useiland cover information....

Handbook: Design of automated redundancy verification

NASA Technical Reports Server (NTRS)

Ford, F. A.; Hasslinger, T. W.; Moreno, F. J.

1971-01-01

The use of the handbook is discussed and the design progress is reviewed. A description of the problem is presented, and examples are given to illustrate the necessity for redundancy verification, along with the types of situations to which it is typically applied. Reusable space vehicles, such as the space shuttle, are recognized as being significant in the development of the automated redundancy verification problem.

Automated Test Assembly Using lp_Solve Version 5.5 in R

ERIC Educational Resources Information Center

Diao, Qi; van der Linden, Wim J.

2011-01-01

This article reviews the use of the software program lp_solve version 5.5 for solving mixed-integer automated test assembly (ATA) problems. The program is freely available under Lesser General Public License 2 (LGPL2). It can be called from the statistical language R using the lpSolveAPI interface. Three empirical problems are presented to…

Human factors in the presentation of computer-generated information - Aspects of design and application in automated flight traffic

NASA Technical Reports Server (NTRS)

Roske-Hofstrand, Renate J.

1990-01-01

The man-machine interface and its influence on the characteristics of computer displays in automated air traffic is discussed. The graphical presentation of spatial relationships and the problems it poses for air traffic control, and the solution of such problems are addressed. Psychological factors involved in the man-machine interface are stressed.

Recommendations for the standardization and interpretation of the electrocardiogram. Part II: Electrocardiography diagnostic statement list. A scientific statement from the American Heart Association Electrocardiography and Arrhythmias Committee, Council on Clinical Cardiology; the American College of Cardiology Foundation; and the Heart Rhythm Society.

PubMed

Mason, Jay W; Hancock, E William; Gettes, Leonard S

2007-03-01

This statement provides a concise list of diagnostic terms for ECG interpretation that can be shared by students, teachers, and readers of electrocardiography. This effort was motivated by the existence of multiple automated diagnostic code sets containing imprecise and overlapping terms. An intended outcome of this statement list is greater uniformity of ECG diagnosis and a resultant improvement in patient care. The lexicon includes primary diagnostic statements, secondary diagnostic statements, modifiers, and statements for the comparison of ECGs. This diagnostic lexicon should be reviewed and updated periodically.

Web-Based Fully Automated Self-Help With Different Levels of Therapist Support for Individuals With Eating Disorder Symptoms: A Randomized Controlled Trial.

PubMed

Aardoom, Jiska J; Dingemans, Alexandra E; Spinhoven, Philip; van Ginkel, Joost R; de Rooij, Mark; van Furth, Eric F

2016-06-17

Despite the disabling nature of eating disorders (EDs), many individuals with ED symptoms do not receive appropriate mental health care. Internet-based interventions have potential to reduce the unmet needs by providing easily accessible health care services. This study aimed to investigate the effectiveness of an Internet-based intervention for individuals with ED symptoms, called "Featback." In addition, the added value of different intensities of therapist support was investigated. Participants (N=354) were aged 16 years or older with self-reported ED symptoms, including symptoms of anorexia nervosa, bulimia nervosa, and binge eating disorder. Participants were recruited via the website of Featback and the website of a Dutch pro-recovery-focused e-community for young women with ED problems. Participants were randomized to: (1) Featback, consisting of psychoeducation and a fully automated self-monitoring and feedback system, (2) Featback supplemented with low-intensity (weekly) digital therapist support, (3) Featback supplemented with high-intensity (3 times a week) digital therapist support, and (4) a waiting list control condition. Internet-administered self-report questionnaires were completed at baseline, post-intervention (ie, 8 weeks after baseline), and at 3- and 6-month follow-up. The primary outcome measure was ED psychopathology. Secondary outcome measures were symptoms of depression and anxiety, perseverative thinking, and ED-related quality of life. Statistical analyses were conducted according to an intent-to-treat approach using linear mixed models. The 3 Featback conditions were superior to a waiting list in reducing bulimic psychopathology (d=-0.16, 95% confidence interval (CI)=-0.31 to -0.01), symptoms of depression and anxiety (d=-0.28, 95% CI=-0.45 to -0.11), and perseverative thinking (d=-0.28, 95% CI=-0.45 to -0.11). No added value of therapist support was found in terms of symptom reduction although participants who received therapist support were significantly more satisfied with the intervention than those who did not receive supplemental therapist support. No significant differences between the Featback conditions supplemented with low- and high-intensity therapist support were found regarding the effectiveness and satisfaction with the intervention. The fully automated Internet-based self-monitoring and feedback intervention Featback was effective in reducing ED and comorbid psychopathology. Supplemental therapist support enhanced satisfaction with the intervention but did not increase its effectiveness. Automated interventions such as Featback can provide widely disseminable and easily accessible care. Such interventions could be incorporated within a stepped-care approach in the treatment of EDs and help to bridge the gap between mental disorders and mental health care services. Netherlands Trial Registry: NTR3646; http://www.trialregister.nl/trialreg/admin/ rctview.asp?TC=3646 (Archived by WebCite at http://www.webcitation.org/6fgHTGKHE).

Modeling Hydraulic Components for Automated FMEA of a Braking System

DTIC Science & Technology

2014-12-23

Modeling Hydraulic Components for Automated FMEA of a Braking System Peter Struss, Alessandro Fraracci Tech. Univ. of Munich, 85748 Garching...Germany struss@in.tum.de ABSTRACT This paper presents work on model-based automation of failure-modes-and-effects analysis ( FMEA ) applied to...the hydraulic part of a vehicle braking system. We describe the FMEA task and the application problem and outline the foundations for automating the

Identifying Requirements for Effective Human-Automation Teamwork

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; John O'Hara; Heather D. Medema

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based onmore » a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.« less

Mechanization of library procedures in the medium-sized medical library. 8. Computer applications in hospital departmental libraries.

PubMed

Howard, E; Kharibian, G

1972-07-01

To test the hypothesis that a standard library system could be designed for hospital departmental libraries, a system was developed and partially tested for four departmental libraries in the Washington University School of Medicine and Associated Hospitals. The system from determination of needs through design and evaluation, is described. The system was limited by specific constraints to control of the monograph collection. Products of control include catalog cards, accessions list, new book list, location list, fund list, missing book list, and discard book list. Sample data form and pages from a procedure manual are given, and conversion from a manual to an automated system is outlined. The question of standardization of library records and procedures is discussed, with indications of the way in which modular design, as utilized in this system, could contribute to greater flexibility in design of future systems. Reference is made to anticipating needs for organizing departmental libraries in developing regional medical library programs and to exploring the role of the departmental library in a medical library network.

Manipulating Tabu List to Handle Machine Breakdowns in Job Shop Scheduling Problems

NASA Astrophysics Data System (ADS)

Nababan, Erna Budhiarti; SalimSitompul, Opim

2011-06-01

Machine breakdowns in a production schedule may occur on a random basis that make the well-known hard combinatorial problem of Job Shop Scheduling Problems (JSSP) becomes more complex. One of popular techniques used to solve the combinatorial problems is Tabu Search. In this technique, moves that will be not allowed to be revisited are retained in a tabu list in order to avoid in gaining solutions that have been obtained previously. In this paper, we propose an algorithm to employ a second tabu list to keep broken machines, in addition to the tabu list that keeps the moves. The period of how long the broken machines will be kept on the list is categorized using fuzzy membership function. Our technique are tested to the benchmark data of JSSP available on the OR library. From the experiment, we found that our algorithm is promising to help a decision maker to face the event of machine breakdowns.

46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Instrumentation, alarms, and centralized stations. 62.25... Instrumentation, alarms, and centralized stations. (a) General. Minimum instrumentation and alarms required for specific types of automated vital systems are listed in Table 62.35-50. (b) Instrumentation Location. (1...

46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Instrumentation, alarms, and centralized stations. 62.25... Instrumentation, alarms, and centralized stations. (a) General. Minimum instrumentation and alarms required for specific types of automated vital systems are listed in Table 62.35-50. (b) Instrumentation Location. (1...

46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Instrumentation, alarms, and centralized stations. 62.25... Instrumentation, alarms, and centralized stations. (a) General. Minimum instrumentation and alarms required for specific types of automated vital systems are listed in Table 62.35-50. (b) Instrumentation Location. (1...

46 CFR 62.25-20 - Instrumentation, alarms, and centralized stations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Instrumentation, alarms, and centralized stations. 62.25... Instrumentation, alarms, and centralized stations. (a) General. Minimum instrumentation and alarms required for specific types of automated vital systems are listed in Table 62.35-50. (b) Instrumentation Location. (1...

Alabama Public Library Service Annual Report.

ERIC Educational Resources Information Center

Alabama Public Library Service, Montgomery.

The Alabama Public Library Service (APLS) lists its duties, goals, and recent accomplishments in this 1988 annual report. Some of these duties and goals are: (1) administering grants for library development and state aid; (2) providing consultation for library automation; (3) researching and answering reference questions; (4) lending books from…

8 CFR 251.1 - Arrival manifests and lists.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) The prevailing practice exception for automated vessels; and (E) The reciprocity exception. (iii) If... under the reciprocity exception, the master or agent shall note on the manifest that the work will be done under the reciprocity exception, and will note the nationality of the vessel's registry and the...

8 CFR 251.1 - Arrival manifests and lists.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) The prevailing practice exception for automated vessels; and (E) The reciprocity exception. (iii) If... under the reciprocity exception, the master or agent shall note on the manifest that the work will be done under the reciprocity exception, and will note the nationality of the vessel's registry and the...

8 CFR 251.1 - Arrival manifests and lists.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) The prevailing practice exception for automated vessels; and (E) The reciprocity exception. (iii) If... under the reciprocity exception, the master or agent shall note on the manifest that the work will be done under the reciprocity exception, and will note the nationality of the vessel's registry and the...

8 CFR 251.1 - Arrival manifests and lists.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) The prevailing practice exception for automated vessels; and (E) The reciprocity exception. (iii) If... under the reciprocity exception, the master or agent shall note on the manifest that the work will be done under the reciprocity exception, and will note the nationality of the vessel's registry and the...

8 CFR 251.1 - Arrival manifests and lists.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) The prevailing practice exception for automated vessels; and (E) The reciprocity exception. (iii) If... under the reciprocity exception, the master or agent shall note on the manifest that the work will be done under the reciprocity exception, and will note the nationality of the vessel's registry and the...

19 CFR Appendix C to Part 171 - Customs Regulations Guidelines for the Imposition and Mitigation of Penalties for Violations of...

Code of Federal Regulations, 2013 CFR

2013-04-01

... material to that business (e.g., if the business regards an entry he should have the invoice, packing list... Customs business. Examples include: a. A working knowledge of all automated systems in use in the district...

19 CFR Appendix C to Part 171 - Customs Regulations Guidelines for the Imposition and Mitigation of Penalties for Violations of...

Code of Federal Regulations, 2014 CFR

2014-04-01

... material to that business (e.g., if the business regards an entry he should have the invoice, packing list... Customs business. Examples include: a. A working knowledge of all automated systems in use in the district...

My Favorite Things Electronically Speaking, 1997 Edition.

ERIC Educational Resources Information Center

Glantz, Shelley

1997-01-01

Responding to an informal survey, 96 media specialists named favorite software, CD-ROMs, and online sites. This article lists automation packages, electronic encyclopedias, CD-ROMs, electronic magazine indexes, CD-ROM and online database services, electronic sources of current events, laser disks for grades 6-12, word processing programs for…

Macrophage Responses to Epithelial Dysfunction Promote Lung Fibrosis in Aging

DTIC Science & Technology

2017-10-01

and Christman, 2016, AJRCMB) and at the time of this report listed among highly accessed on AJRCMB website . Importantly, our protocol and findings...seq were prepared using a high-throughput automated robotic platform (Agilent Bravo) to minimize a batch effect, all libraries have passed the QC

76 FR 37809 - Agency Information Collection Activities; Proposed Collection; Comment Request; Continuous...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... information, submit or view public comments, access the index listing of the contents of the docket, and to... appropriate automated electronic, mechanical, or other technological collection techniques or other forms of... to or above the substance's RQ allows the Federal government to determine whether a Federal response...

Automated Sentence Completion Scoring.

ERIC Educational Resources Information Center

Veldman, Donald J.

A 62-item form of the sentence-completion technique requiring one-word responses was administered to 1718 undergraduates in teacher education. The data were punched on cards and lists of different responses were compiled. Responses indicating evasion, hostility, anxiety and depression were identified for each stem to form a scoring "dictionary." A…

Data Processing for High School Students

ERIC Educational Resources Information Center

Spiegelberg, Emma Jo

1974-01-01

Data processing should be taught at the high school level so students may develop a general understanding and appreciation for the capabilities and the limitations of these automated data processing systems. Card machines, wiring, logic, flowcharting, and Cobol programing are to be taught, with behavioral objectives for each section listed. (SC)

Aviation safety/automation program overview

NASA Technical Reports Server (NTRS)

Morello, Samuel A.

1990-01-01

The goal is to provide a technology base leading to improved safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers. Information on the problems, specific objectives, human-automation interaction, intelligent error-tolerant systems, and air traffic control/cockpit integration is given in viewgraph form.

Rebooting the East: Automation in University Libraries of the Former German Democratic Republic.

ERIC Educational Resources Information Center

Seadle, Michael

1996-01-01

Provides a history of the automation efforts at former East German libraries that have made their resources available for the first time. Highlights include World Wide Web home page addresses; library problems, including censorship; automation guidelines, funding, and cooperation; online catalogs; and specific examples of university libraries'…

Development of a Centralized Automated Scientific and Technical Information Service in the People's Republic of Bulgaria.

ERIC Educational Resources Information Center

Kiratsov, P.

1983-01-01

Discusses the design and organization of the Automated Information Centre, a centralized automated scientific and technical information service established within the main organ of Bulgaria's National System for Scientific and Technical Information, with UNESCO and United Nations Development Program assistance. Problems and perspectives for…

Automated diagnosis of myositis from muscle ultrasound: Exploring the use of machine learning and deep learning methods

PubMed Central

Burlina, Philippe; Billings, Seth; Joshi, Neil

2017-01-01

Objective To evaluate the use of ultrasound coupled with machine learning (ML) and deep learning (DL) techniques for automated or semi-automated classification of myositis. Methods Eighty subjects comprised of 19 with inclusion body myositis (IBM), 14 with polymyositis (PM), 14 with dermatomyositis (DM), and 33 normal (N) subjects were included in this study, where 3214 muscle ultrasound images of 7 muscles (observed bilaterally) were acquired. We considered three problems of classification including (A) normal vs. affected (DM, PM, IBM); (B) normal vs. IBM patients; and (C) IBM vs. other types of myositis (DM or PM). We studied the use of an automated DL method using deep convolutional neural networks (DL-DCNNs) for diagnostic classification and compared it with a semi-automated conventional ML method based on random forests (ML-RF) and “engineered” features. We used the known clinical diagnosis as the gold standard for evaluating performance of muscle classification. Results The performance of the DL-DCNN method resulted in accuracies ± standard deviation of 76.2% ± 3.1% for problem (A), 86.6% ± 2.4% for (B) and 74.8% ± 3.9% for (C), while the ML-RF method led to accuracies of 72.3% ± 3.3% for problem (A), 84.3% ± 2.3% for (B) and 68.9% ± 2.5% for (C). Conclusions This study demonstrates the application of machine learning methods for automatically or semi-automatically classifying inflammatory muscle disease using muscle ultrasound. Compared to the conventional random forest machine learning method used here, which has the drawback of requiring manual delineation of muscle/fat boundaries, DCNN-based classification by and large improved the accuracies in all classification problems while providing a fully automated approach to classification. PMID:28854220

Automated diagnosis of myositis from muscle ultrasound: Exploring the use of machine learning and deep learning methods.

PubMed

Burlina, Philippe; Billings, Seth; Joshi, Neil; Albayda, Jemima

2017-01-01

To evaluate the use of ultrasound coupled with machine learning (ML) and deep learning (DL) techniques for automated or semi-automated classification of myositis. Eighty subjects comprised of 19 with inclusion body myositis (IBM), 14 with polymyositis (PM), 14 with dermatomyositis (DM), and 33 normal (N) subjects were included in this study, where 3214 muscle ultrasound images of 7 muscles (observed bilaterally) were acquired. We considered three problems of classification including (A) normal vs. affected (DM, PM, IBM); (B) normal vs. IBM patients; and (C) IBM vs. other types of myositis (DM or PM). We studied the use of an automated DL method using deep convolutional neural networks (DL-DCNNs) for diagnostic classification and compared it with a semi-automated conventional ML method based on random forests (ML-RF) and "engineered" features. We used the known clinical diagnosis as the gold standard for evaluating performance of muscle classification. The performance of the DL-DCNN method resulted in accuracies ± standard deviation of 76.2% ± 3.1% for problem (A), 86.6% ± 2.4% for (B) and 74.8% ± 3.9% for (C), while the ML-RF method led to accuracies of 72.3% ± 3.3% for problem (A), 84.3% ± 2.3% for (B) and 68.9% ± 2.5% for (C). This study demonstrates the application of machine learning methods for automatically or semi-automatically classifying inflammatory muscle disease using muscle ultrasound. Compared to the conventional random forest machine learning method used here, which has the drawback of requiring manual delineation of muscle/fat boundaries, DCNN-based classification by and large improved the accuracies in all classification problems while providing a fully automated approach to classification.

Feasibility study of a take-home array-based functional electrical stimulation system with automated setup for current functional electrical stimulation users with foot-drop.

PubMed

Prenton, Sarah; Kenney, Laurence P; Stapleton, Claire; Cooper, Glen; Reeves, Mark L; Heller, Ben W; Sobuh, Mohammad; Barker, Anthony T; Healey, Jamie; Good, Timothy R; Thies, Sibylle B; Howard, David; Williamson, Tracey

2014-10-01

To investigate the feasibility of unsupervised community use of an array-based automated setup functional electrical stimulator for current foot-drop functional electrical stimulation (FES) users. Feasibility study. Gait laboratory and community use. Participants (N=7) with diagnosis of unilateral foot-drop of central neurologic origin (>6mo) who were regular users of a foot-drop FES system (>3mo). Array-based automated setup FES system for foot-drop (ShefStim). Logged usage, logged automated setup times for the array-based automated setup FES system and diary recording of problems experienced, all collected in the community environment. Walking speed, ankle angles at initial contact, foot clearance during swing, and the Quebec User Evaluation of Satisfaction with Assistive Technology version 2.0 (QUEST version 2.0) questionnaire, all collected in the gait laboratory. All participants were able to use the array-based automated setup FES system. Total setup time took longer than participants' own FES systems, and automated setup time was longer than in a previous study of a similar system. Some problems were experienced, but overall, participants were as satisfied with this system as their own FES system. The increase in walking speed (N=7) relative to no stimulation was comparable between both systems, and appropriate ankle angles at initial contact (N=7) and foot clearance during swing (n=5) were greater with the array-based automated setup FES system. This study demonstrates that an array-based automated setup FES system for foot-drop can be successfully used unsupervised. Despite setup's taking longer and some problems, users are satisfied with the system and it would appear as effective, if not better, at addressing the foot-drop impairment. Further product development of this unique system, followed by a larger-scale and longer-term study, is required before firm conclusions about its efficacy can be reached. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Rapid Classification of Landsat TM Imagery for Phase 1 Stratification Using the Automated NDVI Threshold Supervised Classification (ANTSC) Methodology

Treesearch

William H. Cooke; Dennis M. Jacobs

2005-01-01

FIA annual inventories require rapid updating of pixel-based Phase 1 estimates. Scientists at the Southern Research Station are developing an automated methodology that uses a Normalized Difference Vegetation Index (NDVI) for identifying and eliminating problem FIA plots from the analysis. Problem plots are those that have questionable land use/land cover information....

Comparison of Integer Programming (IP) Solvers for Automated Test Assembly (ATA). Research Report. ETS RR-15-05

ERIC Educational Resources Information Center

Donoghue, John R.

2015-01-01

At the heart of van der Linden's approach to automated test assembly (ATA) is a linear programming/integer programming (LP/IP) problem. A variety of IP solvers are available, ranging in cost from free to hundreds of thousands of dollars. In this paper, I compare several approaches to solving the underlying IP problem. These approaches range from…

Towards cooperative guidance and control of highly automated vehicles: H-Mode and Conduct-by-Wire.

PubMed

Flemisch, Frank Ole; Bengler, Klaus; Bubb, Heiner; Winner, Hermann; Bruder, Ralph

2014-01-01

This article provides a general ergonomic framework of cooperative guidance and control for vehicles with an emphasis on the cooperation between a human and a highly automated vehicle. In the twenty-first century, mobility and automation technologies are increasingly fused. In the sky, highly automated aircraft are flying with a high safety record. On the ground, a variety of driver assistance systems are being developed, and highly automated vehicles with increasingly autonomous capabilities are becoming possible. Human-centred automation has paved the way for a better cooperation between automation and humans. How can these highly automated systems be structured so that they can be easily understood, how will they cooperate with the human? The presented research was conducted using the methods of iterative build-up and refinement of framework by triangulation, i.e. by instantiating and testing the framework with at least two derived concepts and prototypes. This article sketches a general, conceptual ergonomic framework of cooperative guidance and control of highly automated vehicles, two concepts derived from the framework, prototypes and pilot data. Cooperation is exemplified in a list of aspects and related to levels of the driving task. With the concept 'Conduct-by-Wire', cooperation happens mainly on the guidance level, where the driver can delegate manoeuvres to the automation with a specialised manoeuvre interface. With H-Mode, a haptic-multimodal interaction with highly automated vehicles based on the H(orse)-Metaphor, cooperation is mainly done on guidance and control with a haptically active interface. Cooperativeness should be a key aspect for future human-automation systems. Especially for highly automated vehicles, cooperative guidance and control is a research direction with already promising concepts and prototypes that should be further explored. The application of the presented approach is every human-machine system that moves and includes high levels of assistance/automation.

Intelligent Automation Approach for Improving Pilot Situational Awareness

NASA Technical Reports Server (NTRS)

Spirkovska, Lilly

2004-01-01

Automation in the aviation domain has been increasing for the past two decades. Pilot reaction to automation varies from highly favorable to highly critical depending on both the pilot's background and how effectively the automation is implemented. We describe a user-centered approach for automation that considers the pilot's tasks and his needs related to accomplishing those tasks. Further, we augment rather than replace how the pilot currently fulfills his goals, relying on redundant displays that offer the pilot an opportunity to build trust in the automation. Our prototype system automates the interpretation of hydraulic system faults of the UH-60 helicopter. We describe the problem with the current system and our methodology for resolving it.

Perspective: Whither the problem list? Organ-based documentation and deficient synthesis by medical trainees.

PubMed

Kaplan, Daniel M

2010-10-01

The author argues that the well-formulated problem list is essential for both organizing and evaluating diagnostic thinking. He considers evidence of deficiencies in problem lists in the medical record. He observes a trend among medical trainees toward organizing notes in the medical record according to lists of organ systems or medical subspecialties and hypothesizes that system-based documentation may undermine the art of problem formulation and diagnostic synthesis. Citing research linking more sophisticated problem representation with diagnostic success, he suggests that documentation style and clinical reasoning are closely connected and that organ-based documentation may predispose trainees to several varieties of cognitive diagnostic error and deficient synthesis. These include framing error, premature or absent closure, failure to integrate related findings, and failure to recognize the level of diagnostic resolution attained for a given problem. He acknowledges the pitfalls of higher-order diagnostic resolution, including the application of labels unsupported by firm evidence, while maintaining that diagnostic resolution as far as evidence permits is essential to both rational care of patients and rigorous education of learners. He proposes further research, including comparison of diagnostic efficiency between organ- and problem-oriented thinkers. He hypothesizes that the subspecialty-based structure of academic medical services helps perpetuate organ-system-based thinking, and calls on clinical educators to renew their emphasis on the formulation and documentation of complete and precise problem lists and progressively refined diagnoses by trainees.

A multiple-drawer medication layout problem in automated dispensing cabinets.

PubMed

Pazour, Jennifer A; Meller, Russell D

2012-12-01

In this paper we investigate the problem of locating medications in automated dispensing cabinets (ADCs) to minimize human selection errors. We formulate the multiple-drawer medication layout problem and show that the problem can be formulated as a quadratic assignment problem. As a way to evaluate various medication layouts, we develop a similarity rating for medication pairs. To solve industry-sized problem instances, we develop a heuristic approach. We use hospital ADC transaction data to conduct a computational experiment to test the performance of our developed heuristics, to demonstrate how our approach can aid in ADC design trade-offs, and to illustrate the potential improvements that can be made when applying an analytical process to the multiple-drawer medication layout problem. Finally, we present conclusions and future research directions.

Bibliography of Recent Books on Creativity and Problem Solving: Supplement 31.

ERIC Educational Resources Information Center

Stievater, Susan M.

1993-01-01

This bibliography lists approximately 55 books on creativity and problem solving, published in 1992 and 1993. For each listing, bibliographic information is provided along with one or more subject descriptor terms. (JDD)

Development and preliminary validation of an Observation List for detecting mental disorders and social Problems in the elderly in primary and home care (OLP).

PubMed

Tak, Erwin C P M; van Hespen, Ariëtte T H; Verhaak, Peter F M; Eekhof, Just; Hopman-Rock, Marijke

2016-07-01

Even though the prevalence of mental disorders and social problems is high among elderly patients, it is difficult to detect these in a primary (home) care setting. Goal was the development and preliminary validation of a short observation list to detect six problem areas: anxiety, depression, cognition, suspicion, loneliness, and somatisation. A draft list of indicators identified from a short review of the literature and the opinions of 22 experts was evaluated by general practitioners (GPs) and home care organisations for feasibility. It was then used by GPs and home care personnel to observe patients, who also completed validated tests for psychological disorders (General Health Questionnaire 12 item version (GHQ-12)), depression (Geriatric Depression Scale 15-item version (GDS-15)), anxiety and suspicion (Symptom Checklist-90 (SCL-90)), loneliness (University of California, Los Angeles (UCLA)), somatisation (Illness Attitude Scale (IAS)), and cognition (Mini-Mental State Examination (MMSE)). GPs and home care personnel observed 180 patients (mean age 78.4 years; 66% female) and evaluated the draft list during a regular visit. Cronbach's α was 0.87 for the draft list and ≥0.80 for the draft problem areas (loneliness and suspicion excepted). Principal component analysis identified six components (cognition, depression + loneliness, somatisation, anxiety + suspicion, depression (other signs), and an ambiguous component). Convergent validity was shown for the indicators list as a whole (using the GHQ-12), and the subscales of depression, anxiety, loneliness, cognition, and somatisation. Using pre-set agreed criteria, the list was reduced to 14 final indicators divided over five problem areas. The Observation List for mental disorders and social Problems (OLP) proved to be preliminarily valid, reliable, and feasible for use in primary and home care settings. Copyright © John Wliey & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Just-in-time coding of the problem list in a clinical environment.

PubMed Central

Warren, J. J.; Collins, J.; Sorrentino, C.; Campbell, J. R.

1998-01-01

Clinically useful problem lists are essential to the CPR. Providing a terminology that is standardized and understood by all clinicians is a major challenge. UNMC has developed a lexicon to support their problem list. Using a just-in-time coding strategy, the lexicon is maintained and extended prospectively in a dynamic clinical environment. The terms in the lexicon are mapped to ICD-9-CM, NANDA, and SNOMED International classification schemes. Currently, the lexicon contains 12,000 terms. This process of development and maintenance of the lexicon is described. PMID:9929226

Automation Problems of 1968; Papers Presented at the Meeting...October 4-5, 1968.

ERIC Educational Resources Information Center

Andrews, Theodora, Ed.

Librarians and their concerned colleagues met to give, hear and discuss papers on library automation, primarily by computers. Noted at this second meeting on library automation were: (1) considerably more sophistication and casualness about the techniques involved, (2) considerably more assurance of what and where things can be applied and (3)…

Adjective Check List Correlates of Social Conflict Problems in College Students

ERIC Educational Resources Information Center

Heilbrun, Alfred B., Jr.

1970-01-01

Assesses ability of Adjective Check List (ACL) to distinguish between clients of a college mental health facility who admitted to social alienation as a primary or secondary problem and clients who denied the importance of this problem- Scores on scales measuring affiliation and heterosexuality and an affiliation minus succorance" index differed…

Application of Model-Based Systems Engineering (MBSE) to Compare Legacy and Future Forces in Mine Warfare (MIW) Missions

DTIC Science & Technology

2014-12-01

model the list is sorted by using a “nearest neighbor” ap- proach as a solution to the “ traveling salesman problem ” to create a list of targets in the...2 B. PROBLEM .......................................................................................................3 C. APPROACH...54 4. Problem Statement.............................................................................54 C. REQUIREMENTS

Automated Telephone Self-Management Support for Diabetes in a Low-Income Health Plan: A Health Care Utilization and Cost Analysis.

PubMed

Quan, Judy; Lee, Alexandra K; Handley, Margaret A; Ratanawongsa, Neda; Sarkar, Urmimala; Tseng, Samuel; Schillinger, Dean

2015-12-01

The objective was to determine whether automated telephone self-management support (ATSM) for low-income, linguistically diverse health plan members with diabetes affects health care utilization or cost. A government-sponsored managed care plan for low-income patients implemented a demonstration project between 2009 and 2011 that involved a 6-month ATSM intervention for 362 English-, Spanish-, or Cantonese-speaking members with diabetes from 4 publicly funded clinics. Participants were randomized to immediate intervention or a wait-list. Medical and pharmacy claims used in this analysis were obtained from the managed care plan. Medical claims included hospitalizations, ambulance use, emergency department visits, and outpatient visits. In the 6-month period following enrollment, intervention participants generated half as many emergency department visits and hospitalizations (rate ratio 0.52, 95% CI 0.26, 1.04) compared to wait-listed participants, but these differences did not reach statistical significance (P=0.06). With adjustment for prior year cost, intervention participants also had a nonsignificant reduction of $26.78 in total health care costs compared to wait-listed individuals (P=0.93). The observed trends suggest that ATSM could yield potential health service benefits for health plans that provide coverage for chronic disease patients in safety net settings. ATSM should be further scaled up to determine whether it is associated with a greater reduction in health care utilization and costs.

NOAA Weather Radio

Science.gov Websites

¡tico de programación de la Radio del Tiempo de NOAA la capacidad de transmitir en español. Cualquier Programación Español Listado de estación Explicacion de SAME Coverage Station Listing County Listing Search For Go NWS All NOAA Las Políticas de Programación en Español Se le añadió al sistema automÃ

Computer vision for microscopy diagnosis of malaria.

PubMed

Tek, F Boray; Dempster, Andrew G; Kale, Izzet

2009-07-13

This paper reviews computer vision and image analysis studies aiming at automated diagnosis or screening of malaria infection in microscope images of thin blood film smears. Existing works interpret the diagnosis problem differently or propose partial solutions to the problem. A critique of these works is furnished. In addition, a general pattern recognition framework to perform diagnosis, which includes image acquisition, pre-processing, segmentation, and pattern classification components, is described. The open problems are addressed and a perspective of the future work for realization of automated microscopy diagnosis of malaria is provided.

An automated methodology development. [software design for combat simulation

NASA Technical Reports Server (NTRS)

Hawley, L. R.

1985-01-01

The design methodology employed in testing the applicability of Ada in large-scale combat simulations is described. Ada was considered as a substitute for FORTRAN to lower life cycle costs and ease the program development efforts. An object-oriented approach was taken, which featured definitions of military targets, the capability of manipulating their condition in real-time, and one-to-one correlation between the object states and real world states. The simulation design process was automated by the problem statement language (PSL)/problem statement analyzer (PSA). The PSL/PSA system accessed the problem data base directly to enhance the code efficiency by, e.g., eliminating non-used subroutines, and provided for automated report generation, besides allowing for functional and interface descriptions. The ways in which the methodology satisfied the responsiveness, reliability, transportability, modifiability, timeliness and efficiency goals are discussed.

Automated Acquisition Systems: Keynote Address.

ERIC Educational Resources Information Center

Boss, Richard D.

1980-01-01

The 1980s offer libraries numerous automated acquisitions alternatives, including turnkey systems from circulation system vendors and the acquisition subsystems of the bibliographic utilities. Integration of systems from several sources poses the principal problem. (Author/RAA)

Reduced Attention Allocation during Short Periods of Partially Automated Driving: An Event-Related Potentials Study

PubMed Central

Solís-Marcos, Ignacio; Galvao-Carmona, Alejandro; Kircher, Katja

2017-01-01

Research on partially automated driving has revealed relevant problems with driving performance, particularly when drivers’ intervention is required (e.g., take-over when automation fails). Mental fatigue has commonly been proposed to explain these effects after prolonged automated drives. However, performance problems have also been reported after just a few minutes of automated driving, indicating that other factors may also be involved. We hypothesize that, besides mental fatigue, an underload effect of partial automation may also affect driver attention. In this study, such potential effect was investigated during short periods of partially automated and manual driving and at different speeds. Subjective measures of mental demand and vigilance and performance to a secondary task (an auditory oddball task) were used to assess driver attention. Additionally, modulations of some specific attention-related event-related potentials (ERPs, N1 and P3 components) were investigated. The mental fatigue effects associated with the time on task were also evaluated by using the same measurements. Twenty participants drove in a fixed-base simulator while performing an auditory oddball task that elicited the ERPs. Six conditions were presented (5–6 min each) combining three speed levels (low, comfortable and high) and two automation levels (manual and partially automated). The results showed that, when driving partially automated, scores in subjective mental demand and P3 amplitudes were lower than in the manual conditions. Similarly, P3 amplitude and self-reported vigilance levels decreased with the time on task. Based on previous studies, these findings might reflect a reduction in drivers’ attention resource allocation, presumably due to the underload effects of partial automation and to the mental fatigue associated with the time on task. Particularly, such underload effects on attention could explain the performance decrements after short periods of automated driving reported in other studies. However, further studies are needed to investigate this relationship in partial automation and in other automation levels. PMID:29163112

Automation of the micro-arc oxidation process

NASA Astrophysics Data System (ADS)

Golubkov, P. E.; Pecherskaya, E. A.; Karpanin, O. V.; Shepeleva, Y. V.; Zinchenko, T. O.; Artamonov, D. V.

2017-11-01

At present the significantly increased interest in micro-arc oxidation (MAO) encourages scientists to look for the solution of the problem of this technological process controllability. To solve this problem an automated technological installation MAO was developed, its structure and control principles are presented in this article. This device will allow to provide the controlled synthesis of MAO coatings and to identify MAO process patterns which contributes to commercialization of this technology.

Recommendations for the standardization and interpretation of the electrocardiogram: part II: Electrocardiography diagnostic statement list: a scientific statement from the American Heart Association Electrocardiography and Arrhythmias Committee, Council on Clinical Cardiology; the American College of Cardiology Foundation; and the Heart Rhythm Society: endorsed by the International Society for Computerized Electrocardiology.

PubMed

Mason, Jay W; Hancock, E William; Gettes, Leonard S; Bailey, James J; Childers, Rory; Deal, Barbara J; Josephson, Mark; Kligfield, Paul; Kors, Jan A; Macfarlane, Peter; Pahlm, Olle; Mirvis, David M; Okin, Peter; Rautaharju, Pentti; Surawicz, Borys; van Herpen, Gerard; Wagner, Galen S; Wellens, Hein

2007-03-13

This statement provides a concise list of diagnostic terms for ECG interpretation that can be shared by students, teachers, and readers of electrocardiography. This effort was motivated by the existence of multiple automated diagnostic code sets containing imprecise and overlapping terms. An intended outcome of this statement list is greater uniformity of ECG diagnosis and a resultant improvement in patient care. The lexicon includes primary diagnostic statements, secondary diagnostic statements, modifiers, and statements for the comparison of ECGs. This diagnostic lexicon should be reviewed and updated periodically.

Recommendations for the standardization and interpretation of the electrocardiogram: part II: electrocardiography diagnostic statement list a scientific statement from the American Heart Association Electrocardiography and Arrhythmias Committee, Council on Clinical Cardiology; the American College of Cardiology Foundation; and the Heart Rhythm Society Endorsed by the International Society for Computerized Electrocardiology.

PubMed

Mason, Jay W; Hancock, E William; Gettes, Leonard S; Bailey, James J; Childers, Rory; Deal, Barbara J; Josephson, Mark; Kligfield, Paul; Kors, Jan A; Macfarlane, Peter; Pahlm, Olle; Mirvis, David M; Okin, Peter; Rautaharju, Pentti; Surawicz, Borys; van Herpen, Gerard; Wagner, Galen S; Wellens, Hein

2007-03-13

This statement provides a concise list of diagnostic terms for ECG interpretation that can be shared by students, teachers, and readers of electrocardiography. This effort was motivated by the existence of multiple automated diagnostic code sets containing imprecise and overlapping terms. An intended outcome of this statement list is greater uniformity of ECG diagnosis and a resultant improvement in patient care. The lexicon includes primary diagnostic statements, secondary diagnostic statements, modifiers, and statements for the comparison of ECGs. This diagnostic lexicon should be reviewed and updated periodically.

An Automated Cloud Observation System (ACOS).

DTIC Science & Technology

1980-12-17

IQ 4. TITLE (and SubliIII.J 5- TYPE OF REPORT & PERIOD COVERED AN.JUTOXMATrD A LOUD OBSERVATION Scientific . Interim. SYSTEM (ALLIS) 6 PERFORMING ORG...p oci -dIi IV ( ( )S). . hhe 6 lists the percentage of agreement realizied by -:~ tc thc fiftt en metthods (I’ p touping ceilomieter t’ ata (see Ta

Automated meter reading. (Latest citations from the INSPEC database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-12-01

The bibliography contains citations concerning the automatic collection of data from utility meters. Citations focus on line carrier communications, radio communications, and telecommunication methods of data transmission. Applications for water, gas, and electric power meters are discussed. (Contains a minimum of 56 citations and includes a subject term index and title list.)

48 CFR 225.301-4 - Contract clause.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at http://www.dod.mil/bta/products/spot.html and http://www.acq.osd.mil/log/PS/spot.html. [73 FR 16774...

48 CFR 225.301-4 - Contract clause.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at http://www.dod.mil/bta/products/spot.html and http://www.acq.osd.mil/log/PS/spot.html. [73 FR 16774...

48 CFR 225.301-4 - Contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at http://www.dod.mil/bta/products/spot.html and http://www.acq.osd.mil/log/PS/spot.html. [73 FR 16774...

48 CFR 225.301-4 - Contract clause.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at http://www.dod.mil/bta/products/spot.html and http://www.acq.osd.mil/log/PS/spot.html. [73 FR 16774...

48 CFR 225.301-4 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at http://www.dod.mil/bta/products/spot.html and http://www.acq.osd.mil/log/PS/spot.html. [73 FR 16774...

Orbital construction demonstration study. Volume 3: Requirements document

NASA Technical Reports Server (NTRS)

1977-01-01

A comprehensive set of requirements that defines the objective, scope and configuration of the orbital test facility needed to demonstrate the necessary automated fabrication, construction and assembly technology is provided. In addition to the requirements for the orbital demonstration facility, a detailed list of experiment requirements is included for various areas of technology.

77 FR 20623 - Agency Information Collection Activities; Proposed Collection; Comment Request; General Hazardous...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... collection of information, submit or view public comments, access the index listing of the contents of the... appropriate automated electronic, mechanical, or other technological collection techniques or other forms of... this action are business and other for-profit, as well as State, Local, and Tribal governments. Title...

10 CFR Appendix D to Part 110 - Illustrative List of Aerodynamic Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2013 CFR

2013-01-01

... control the flow within the cascade: (1) Separation nozzles and assemblies. Especially designed or... fluids. (10) Special shut-off and control valves. Especially designed or prepared manual or automated... assemblies. Especially designed or prepared vortex tubes that are cylindrical or tapered, made of or...

10 CFR Appendix D to Part 110 - Illustrative List of Aerodynamic Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2014 CFR

2014-01-01

... control the flow within the cascade: (1) Separation nozzles and assemblies. Especially designed or... fluids. (10) Special shut-off and control valves. Especially designed or prepared manual or automated... assemblies. Especially designed or prepared vortex tubes that are cylindrical or tapered, made of or...

10 CFR Appendix D to Part 110 - Illustrative List of Aerodynamic Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2012 CFR

2012-01-01

... control the flow within the cascade: (1) Separation nozzles and assemblies. Especially designed or... fluids. (10) Special shut-off and control valves. Especially designed or prepared manual or automated... assemblies. Especially designed or prepared vortex tubes that are cylindrical or tapered, made of or...

Visiting An "Egg Factory" on the Farm: A Resource Unit.

ERIC Educational Resources Information Center

Ediger, Marlow

The resource unit indicates how elementary school teachers can use contemporary poultry farming to teach the concepts of change and specialization in American society and to show the effects of automation of American farms. The unit lists general objectives for students: to develop an understanding of farm specialization, especially in egg…

76 FR 22733 - Cable Statutory License: Specialty Station List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... Counsel, Copyright GC/I&R, P.O. Box 70400, Southwest Station, Washington, DC 20024. Telephone: (202) 707... foreign- language, religious, and/or automated programming in one-third of the hours of an average... programming comports with the 1981 FCC definition, and hence, qualifies it as a specialty station. 55 FR 40021...

76 FR 69288 - Cable Statutory License: Specialty Station List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

..., Copyright GC/I&R, P.O. Box 70400, Southwest Station, Washington, DC 20024. Telephone: (202) 707-8380... generally carries foreign-language, religious, and/or automated programming in one-third of the hours of an... the station to file an affidavit with the Office attesting to the fact that the station's programming...

Definition of performance specifications for automated Analytical Electrophoresis Facility (AAEF)

NASA Technical Reports Server (NTRS)

Brooks, D. E.

1976-01-01

In order to provide specifications for the automated Analytical Electrophoresis Facility (AAEF) that would satisfy the broadest variety of demands of a future user community, a survey was carried out of all those people who were identified as having published papers on cell electrophoresis in the past four years. A computer search was conducted of the relevant literature from which a list of 87 investigators was derived and defined as the user community for purposes of the mailing. A questionnaire was developed covering the areas of performance which required definition which was subsequently circulated to the user community. Based on the response to this survey performance specifications were assembled.

Planning for Office Automation.

ERIC Educational Resources Information Center

Mick, Colin K.

1983-01-01

Outlines a practical approach to planning for office automation termed the "Focused Process Approach" (the "what" phase, "how" phase, "doing" phase) which is a synthesis of the problem-solving and participatory planning approaches. Thirteen references are provided. (EJS)

Automated Guideway Network Traffic Modeling

DOT National Transportation Integrated Search

1972-02-01

In the literature concerning automated guideway transportation systems, such as dual mode, a great deal of effort has been expended on the use of deterministic reservation schemes and the problem of merging streams of vehicles. However, little attent...

Automated Guideway Ground Transportation Network Simulation

DOT National Transportation Integrated Search

1975-08-01

The report discusses some automated guideway management problems relating to ground transportation systems and provides an outline of the types of models and algorithms that could be used to develop simulation tools for evaluating system performance....

Automated Conflict Resolution, Arrival Management and Weather Avoidance for ATM

NASA Technical Reports Server (NTRS)

Erzberger, H.; Lauderdale, Todd A.; Chu, Yung-Cheng

2010-01-01

The paper describes a unified solution to three types of separation assurance problems that occur in en-route airspace: separation conflicts, arrival sequencing, and weather-cell avoidance. Algorithms for solving these problems play a key role in the design of future air traffic management systems such as NextGen. Because these problems can arise simultaneously in any combination, it is necessary to develop integrated algorithms for solving them. A unified and comprehensive solution to these problems provides the foundation for a future air traffic management system that requires a high level of automation in separation assurance. The paper describes the three algorithms developed for solving each problem and then shows how they are used sequentially to solve any combination of these problems. The first algorithm resolves loss-of-separation conflicts and is an evolution of an algorithm described in an earlier paper. The new version generates multiple resolutions for each conflict and then selects the one giving the least delay. Two new algorithms, one for sequencing and merging of arrival traffic, referred to as the Arrival Manager, and the other for weather-cell avoidance are the major focus of the paper. Because these three problems constitute a substantial fraction of the workload of en-route controllers, integrated algorithms to solve them is a basic requirement for automated separation assurance. The paper also reviews the Advanced Airspace Concept, a proposed design for a ground-based system that postulates redundant systems for separation assurance in order to achieve both high levels of safety and airspace capacity. It is proposed that automated separation assurance be introduced operationally in several steps, each step reducing controller workload further while increasing airspace capacity. A fast time simulation was used to determine performance statistics of the algorithm at up to 3 times current traffic levels.

A cyclostationary multi-domain analysis of fluid instability in Kaplan turbines

NASA Astrophysics Data System (ADS)

Pennacchi, P.; Borghesani, P.; Chatterton, S.

2015-08-01

Hydraulic instabilities represent a critical problem for Francis and Kaplan turbines, reducing their useful life due to increase of fatigue on the components and cavitation phenomena. Whereas an exhaustive list of publications on computational fluid-dynamic models of hydraulic instability is available, the possibility of applying diagnostic techniques based on vibration measurements has not been investigated sufficiently, also because the appropriate sensors seldom equip hydro turbine units. The aim of this study is to fill this knowledge gap and to exploit fully, for this purpose, the potentiality of combining cyclostationary analysis tools, able to describe complex dynamics such as those of fluid-structure interactions, with order tracking procedures, allowing domain transformations and consequently the separation of synchronous and non-synchronous components. This paper will focus on experimental data obtained on a full-scale Kaplan turbine unit, operating in a real power plant, tackling the issues of adapting such diagnostic tools for the analysis of hydraulic instabilities and proposing techniques and methodologies for a highly automated condition monitoring system.

Crew system dynamics - Combining humans and automation

NASA Technical Reports Server (NTRS)

Connors, Mary

1989-01-01

Some of the human factor issues involved in effectively combining human and automated systems are examined with particular reference to spaceflights. The concepts of the crew system and crew systems dynamics are defined, and the present status of crew systems is summarized. The possibilities and potential problems aasociated with the use of automated systems are discussed, as are unique capabilities and possible errors introduced by human participants. It is emphasized that the true integration of human and automated systems must allow for the characteristics of both.

Demonstration of Human-Autonomy Teaming Principles

NASA Technical Reports Server (NTRS)

Shively, Robert Jay

2016-01-01

Known problems with automation include lack of mode awareness, automation brittleness, and risk of miscalibrated trust. Human-Autonomy Teaming (HAT) is essential for improving these problems. We have identified some critical components of HAT and ran a part-task study to introduce these components to a ground station that supports flight following of multiple aircraft. Our goal was to demonstrate, evaluate, and refine HAT principles. This presentation provides a brief summary of the study and initial findings.

MaRiMba: a software application for spectral library-based MRM transition list assembly.

PubMed

Sherwood, Carly A; Eastham, Ashley; Lee, Lik Wee; Peterson, Amelia; Eng, Jimmy K; Shteynberg, David; Mendoza, Luis; Deutsch, Eric W; Risler, Jenni; Tasman, Natalie; Aebersold, Ruedi; Lam, Henry; Martin, Daniel B

2009-10-01

Multiple reaction monitoring mass spectrometry (MRM-MS) is a targeted analysis method that has been increasingly viewed as an avenue to explore proteomes with unprecedented sensitivity and throughput. We have developed a software tool, called MaRiMba, to automate the creation of explicitly defined MRM transition lists required to program triple quadrupole mass spectrometers in such analyses. MaRiMba creates MRM transition lists from downloaded or custom-built spectral libraries, restricts output to specified proteins or peptides, and filters based on precursor peptide and product ion properties. MaRiMba can also create MRM lists containing corresponding transitions for isotopically heavy peptides, for which the precursor and product ions are adjusted according to user specifications. This open-source application is operated through a graphical user interface incorporated into the Trans-Proteomic Pipeline, and it outputs the final MRM list to a text file for upload to MS instruments. To illustrate the use of MaRiMba, we used the tool to design and execute an MRM-MS experiment in which we targeted the proteins of a well-defined and previously published standard mixture.

Phonotactic Diversity Predicts the Time Depth of the World’s Language Families

PubMed Central

Rama, Taraka

2013-01-01

The ASJP (Automated Similarity Judgment Program) described an automated, lexical similarity-based method for dating the world’s language groups using 52 archaeological, epigraphic and historical calibration date points. The present paper describes a new automated dating method, based on phonotactic diversity. Unlike ASJP, our method does not require any information on the internal classification of a language group. Also, the method can use all the available word lists for a language and its dialects eschewing the debate on ‘language’ vs. ‘dialect’. We further combine these dates and provide a new baseline which, to our knowledge, is the best one. We make a systematic comparison of our method, ASJP’s dating procedure, and combined dates. We predict time depths for world’s language families and sub-families using this new baseline. Finally, we explain our results in the model of language change given by Nettle. PMID:23691003

Utilizing the Wikidata system to improve the quality of medical content in Wikipedia in diverse languages: a pilot study.

PubMed

Pfundner, Alexander; Schönberg, Tobias; Horn, John; Boyce, Richard D; Samwald, Matthias

2015-05-05

Wikipedia is an important source of medical information for both patients and medical professionals. Given its wide reach, improving the quality, completeness, and accessibility of medical information on Wikipedia could have a positive impact on global health. We created a prototypical implementation of an automated system for keeping drug-drug interaction (DDI) information in Wikipedia up to date with current evidence about clinically significant drug interactions. Our work is based on Wikidata, a novel, graph-based database backend of Wikipedia currently in development. We set up an automated process for integrating data from the Office of the National Coordinator for Health Information Technology (ONC) high priority DDI list into Wikidata. We set up exemplary implementations demonstrating how the DDI data we introduced into Wikidata could be displayed in Wikipedia articles in diverse languages. Finally, we conducted a pilot analysis to explore if adding the ONC high priority data would substantially enhance the information currently available on Wikipedia. We derived 1150 unique interactions from the ONC high priority list. Integration of the potential DDI data from Wikidata into Wikipedia articles proved to be straightforward and yielded useful results. We found that even though the majority of current English Wikipedia articles about pharmaceuticals contained sections detailing contraindications, only a small fraction of articles explicitly mentioned interaction partners from the ONC high priority list. For 91.30% (1050/1150) of the interaction pairs we tested, none of the 2 articles corresponding to the interacting substances explicitly mentioned the interaction partner. For 7.21% (83/1150) of the pairs, only 1 of the 2 associated Wikipedia articles mentioned the interaction partner; for only 1.48% (17/1150) of the pairs, both articles contained explicit mentions of the interaction partner. Our prototype demonstrated that automated updating of medical content in Wikipedia through Wikidata is a viable option, albeit further refinements and community-wide consensus building are required before integration into public Wikipedia is possible. A long-term endeavor to improve the medical information in Wikipedia through structured data representation and automated workflows might lead to a significant improvement of the quality of medical information in one of the world's most popular Web resources.

Utilizing the Wikidata System to Improve the Quality of Medical Content in Wikipedia in Diverse Languages: A Pilot Study

PubMed Central

Pfundner, Alexander; Schönberg, Tobias; Horn, John; Boyce, Richard D

2015-01-01

Background Wikipedia is an important source of medical information for both patients and medical professionals. Given its wide reach, improving the quality, completeness, and accessibility of medical information on Wikipedia could have a positive impact on global health. Objective We created a prototypical implementation of an automated system for keeping drug-drug interaction (DDI) information in Wikipedia up to date with current evidence about clinically significant drug interactions. Our work is based on Wikidata, a novel, graph-based database backend of Wikipedia currently in development. Methods We set up an automated process for integrating data from the Office of the National Coordinator for Health Information Technology (ONC) high priority DDI list into Wikidata. We set up exemplary implementations demonstrating how the DDI data we introduced into Wikidata could be displayed in Wikipedia articles in diverse languages. Finally, we conducted a pilot analysis to explore if adding the ONC high priority data would substantially enhance the information currently available on Wikipedia. Results We derived 1150 unique interactions from the ONC high priority list. Integration of the potential DDI data from Wikidata into Wikipedia articles proved to be straightforward and yielded useful results. We found that even though the majority of current English Wikipedia articles about pharmaceuticals contained sections detailing contraindications, only a small fraction of articles explicitly mentioned interaction partners from the ONC high priority list. For 91.30% (1050/1150) of the interaction pairs we tested, none of the 2 articles corresponding to the interacting substances explicitly mentioned the interaction partner. For 7.21% (83/1150) of the pairs, only 1 of the 2 associated Wikipedia articles mentioned the interaction partner; for only 1.48% (17/1150) of the pairs, both articles contained explicit mentions of the interaction partner. Conclusions Our prototype demonstrated that automated updating of medical content in Wikipedia through Wikidata is a viable option, albeit further refinements and community-wide consensus building are required before integration into public Wikipedia is possible. A long-term endeavor to improve the medical information in Wikipedia through structured data representation and automated workflows might lead to a significant improvement of the quality of medical information in one of the world’s most popular Web resources. PMID:25944105

A randomized wait-list controlled analysis of the implementation integrity of team-initiated problem solving processes.

PubMed

Newton, J Stephen; Horner, Robert H; Algozzine, Bob; Todd, Anne W; Algozzine, Kate

2012-08-01

Members of Positive Behavior Interventions and Supports (PBIS) teams from 34 elementary schools participated in a Team-Initiated Problem Solving (TIPS) Workshop and follow-up technical assistance. Within the context of a randomized wait-list controlled trial, team members who were the first recipients of the TIPS intervention demonstrated greater implementation integrity in using the problem-solving processes during their team meetings than did members of PBIS Teams in the Wait-List Control group. The success of TIPS at improving implementation integrity of the problem-solving processes is encouraging and suggests the value of conducting additional research focused on determining whether there is a functional relation between use of these problem-solving processes and actual resolution of targeted student academic and social problems. Copyright © 2012 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Automated facial recognition of manually generated clay facial approximations: Potential application in unidentified persons data repositories.

PubMed

Parks, Connie L; Monson, Keith L

2018-01-01

This research examined how accurately 2D images (i.e., photographs) of 3D clay facial approximations were matched to corresponding photographs of the approximated individuals using an objective automated facial recognition system. Irrespective of search filter (i.e., blind, sex, or ancestry) or rank class (R 1 , R 10 , R 25 , and R 50 ) employed, few operationally informative results were observed. In only a single instance of 48 potential match opportunities was a clay approximation matched to a corresponding life photograph within the top 50 images (R 50 ) of a candidate list, even with relatively small gallery sizes created from the application of search filters (e.g., sex or ancestry search restrictions). Increasing the candidate lists to include the top 100 images (R 100 ) resulted in only two additional instances of correct match. Although other untested variables (e.g., approximation method, 2D photographic process, and practitioner skill level) may have impacted the observed results, this study suggests that 2D images of manually generated clay approximations are not readily matched to life photos by automated facial recognition systems. Further investigation is necessary in order to identify the underlying cause(s), if any, of the poor recognition results observed in this study (e.g., potential inferior facial feature detection and extraction). Additional inquiry exploring prospective remedial measures (e.g., stronger feature differentiation) is also warranted, particularly given the prominent use of clay approximations in unidentified persons casework. Copyright © 2017. Published by Elsevier B.V.

Designing for flexible interaction between humans and automation: delegation interfaces for supervisory control.

PubMed

Miller, Christopher A; Parasuraman, Raja

2007-02-01

To develop a method enabling human-like, flexible supervisory control via delegation to automation. Real-time supervisory relationships with automation are rarely as flexible as human task delegation to other humans. Flexibility in human-adaptable automation can provide important benefits, including improved situation awareness, more accurate automation usage, more balanced mental workload, increased user acceptance, and improved overall performance. We review problems with static and adaptive (as opposed to "adaptable") automation; contrast these approaches with human-human task delegation, which can mitigate many of the problems; and revise the concept of a "level of automation" as a pattern of task-based roles and authorizations. We argue that delegation requires a shared hierarchical task model between supervisor and subordinates, used to delegate tasks at various levels, and offer instruction on performing them. A prototype implementation called Playbook is described. On the basis of these analyses, we propose methods for supporting human-machine delegation interactions that parallel human-human delegation in important respects. We develop an architecture for machine-based delegation systems based on the metaphor of a sports team's "playbook." Finally, we describe a prototype implementation of this architecture, with an accompanying user interface and usage scenario, for mission planning for uninhabited air vehicles. Delegation offers a viable method for flexible, multilevel human-automation interaction to enhance system performance while maintaining user workload at a manageable level. Most applications of adaptive automation (aviation, air traffic control, robotics, process control, etc.) are potential avenues for the adaptable, delegation approach we advocate. We present an extended example for uninhabited air vehicle mission planning.

Intelligent Pilot Aids for Flight Re-Planning in Emergencies

NASA Technical Reports Server (NTRS)

Pritchett, Amy R.

2002-01-01

Experimental studies were conducted with pilots to investigate the attributes of automation that would be appropriate for aiding pilots in emergencies. The specific focus of this year was on methods of mitigating automation brittleness. Brittleness occurs when the automatic system is used in circumstances it was not designed for, causing it to choose an incorrect action or make an inaccurate decision for the situation. Brittleness is impossible to avoid since it is impossible to predict every potential situation the automatic system will be exposed to over its life. However, operators are always ultimately responsible for the actions and decisions of the automation they are monitoring or using, which means they must evaluate the automation's decisions and actions for accuracy. As has been pointed out, this is a difficult thing for human operators to do. There have been various suggestions as to how to aid operators with this evaluation. In the study described in this report we studied how presentation of contextual information about an automatic system's decision might impact the ability of the human operators to evaluate that decision. This study focused on the planning of emergency descents. Fortunately, emergencies (e.g., mechanical or electrical malfunction, on-board fire, and medical emergency) happen quite rarely. However, they can be catastrophic when they do. For all predictable or conceivable emergencies, pilots have emergency procedures that they are trained on, but those procedures often end with 'determine suitable airport and land as quickly as possible.' Planning an emergency descent to an unplanned airport is a difficult task, particularly under the time pressures of an emergency. Automatic decision aids could be very efficient at the task of determining an appropriate airport and calculating an optimal trajectory to that airport. This information could be conveyed to the pilot through an emergency descent procedure listing all of the actions necessary to safely land the plane. However, there is still the potential problem of brittleness. This study examined the impact of contextual information in presentations of emergency descent procedures to see if they might impact the pilot's evaluation of the feasibility of the presented procedure. The study and its results are described in detail.

JWST Associations overview: automated generation of combined products

NASA Astrophysics Data System (ADS)

Alexov, Anastasia; Swade, Daryl; Bushouse, Howard; Diaz, Rosa; Eisenhamer, Jonathan; Hack, Warren; Kyprianou, Mark; Levay, Karen; Rahmani, Christopher; Swam, Mike; Valenti, Jeff

2018-01-01

We are presenting the design of the James Webb Space Telescope (JWST) Data Management System (DMS) automated processing of Associations. An Association captures the relationship between exposures and higher level data products, such as combined mosaics created from dithered and tiled observations. The astronomer’s intent is captured within the Proposal Planning System (PPS) and provided to DMS as candidate associations. These candidates are converted into Association Pools and Association Generator Tables that serve as input to automated processing which create the combined data products. Association Pools are generated to capture a list of exposures that could potentially form associations and provide relevant information about those exposures. The Association Generator using definitions on groupings creates one or more Association Tables from a single input Association Pool. Each Association Table defines a set of exposures to be combined and the ruleset of the combination to be performed; the calibration software creates Associated data products based on these input tables. The initial design produces automated Associations within a proposal. Additionally this JWST overall design is conducive to eventually produce Associations for observations from multiple proposals, similar to the Hubble Legacy Archive (HLA).

Air Traffic Control: Status of FAA's Standard Terminal Automation Replacement System Project

DOT National Transportation Integrated Search

1997-03-01

Since the early 1980s, FAA's modernization efforts have experienced lengthy : schedule delays and substantial cost overruns. Because of such problems, in : 1994, FAA restructured its acquisition of the Terminal Advanced Automation : System into more ...

Safety in the Automated Office.

ERIC Educational Resources Information Center

Graves, Pat R.; Greathouse, Lillian R.

1990-01-01

Office automation has introduced new hazards to the workplace: electrical hazards related to computer wiring, musculoskeletal problems resulting from use of computer terminals and design of work stations, and environmental concerns related to ventilation, noise levels, and office machine chemicals. (SK)

Command and Control Common Semantic Core Required to Enable Net-centric Operations

DTIC Science & Technology

2008-05-20

automated processing capability. A former US Marine Corps component C4 director during Operation Iraqi Freedom identified the problems of 1) uncertainty...interoperability improvements to warfighter community processes, thanks to ubiquitous automated processing , are likely high and somewhat easier to quantify. A...synchronized with the actions of other partners / warfare communities. This requires high- quality information, rapid sharing and automated processing – which

Algorithm of the automated choice of points of the acupuncture for EHF-therapy

NASA Astrophysics Data System (ADS)

Lyapina, E. P.; Chesnokov, I. A.; Anisimov, Ya. E.; Bushuev, N. A.; Murashov, E. P.; Eliseev, Yu. Yu.; Syuzanna, H.

2007-05-01

Offered algorithm of the automated choice of points of the acupuncture for EHF-therapy. The recipe formed by algorithm of an automated choice of points for acupunctural actions has a recommendational character. Clinical investigations showed that application of the developed algorithm in EHF-therapy allows to normalize energetic state of the meridians and to effectively solve many problems of an organism functioning.

Visions of Automation and Realities of Certification

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Holloway, Michael C.

2005-01-01

Quite a lot of people envision automation as the solution to many of the problems in aviation and air transportation today, across all sectors: commercial, private, and military. This paper explains why some recent experiences with complex, highly-integrated, automated systems suggest that this vision will not be realized unless significant progress is made over the current state-of-the-practice in software system development and certification.

The impact of human-technology cooperation and distributed cognition in forensic science: biasing effects of AFIS contextual information on human experts.

PubMed

Dror, Itiel E; Wertheim, Kasey; Fraser-Mackenzie, Peter; Walajtys, Jeff

2012-03-01

Experts play a critical role in forensic decision making, even when cognition is offloaded and distributed between human and machine. In this paper, we investigated the impact of using Automated Fingerprint Identification Systems (AFIS) on human decision makers. We provided 3680 AFIS lists (a total of 55,200 comparisons) to 23 latent fingerprint examiners as part of their normal casework. We manipulated the position of the matching print in the AFIS list. The data showed that latent fingerprint examiners were affected by the position of the matching print in terms of false exclusions and false inconclusives. Furthermore, the data showed that false identification errors were more likely at the top of the list and that such errors occurred even when the correct match was present further down the list. These effects need to be studied and considered carefully, so as to optimize human decision making when using technologies such as AFIS. © 2011 American Academy of Forensic Sciences.

Perceptual attributes for the comparison of head-related transfer functions.

PubMed

Simon, Laurent S R; Zacharov, Nick; Katz, Brian F G

2016-11-01

The benefit of using individual head-related transfer functions (HRTFs) in binaural audio is well documented with regards to improving localization precision. However, with the increased use of binaural audio in more complex scene renderings, cognitive studies, and virtual and augmented reality simulations, the perceptual impact of HRTF selection may go beyond simple localization. In this study, the authors develop a list of attributes which qualify the perceived differences between HRTFs, providing a qualitative understanding of the perceptual variance of non-individual binaural renderings. The list of attributes was designed using a Consensus Vocabulary Protocol elicitation method. Participants followed an Individual Vocabulary Protocol elicitation procedure, describing the perceived differences between binaural stimuli based on binauralized extracts of multichannel productions. This was followed by an automated lexical reduction and a series of consensus group meetings during which participants agreed on a list of relevant attributes. Finally, the proposed list of attributes was then evaluated through a listening test, leading to eight valid perceptual attributes for describing the perceptual dimensions affected by HRTF set variations.

Database Migration for Command and Control

DTIC Science & Technology

2002-11-01

Sql - proprietary JDP Private Area Air defense data Defended asset list Oracle 7.3.2 - Automated process (OLTP...TADIL warnings Oracle 7.3.2 Flat File - Discrete transaction with data upds - NRT response required Pull mission data Std SQL ...level execution data Oracle 7.3 User update External interfaces Auto/manual backup Messaging Proprietary replication (internally) SQL Web server

Audiovisual Media for Computer Education.

ERIC Educational Resources Information Center

Van Der Aa, H. J., Ed.

The result of an international survey, this catalog lists over 450 films dealing with computing methods and automation and is intended for those who wish to use audiovisual displays as a means of instruction of computer education. The catalog gives the film's title, running time, and producer and tells whether the film is color or black-and-white,…

Public Relations: A Comprehensive Bibliography; Articles and Books on Public Relations, Communication Theory, Public Opinion, and Propaganda, 1964-1972.

ERIC Educational Resources Information Center

Bishop, Robert L., Comp.

This bibliography lists and sometimes annotates approximately 4,000 books, articles, and speeches about or related to public relations. The book contains sections on such subjects as advertising, agriculture, automation, banking, books, business, chemical industry, computers, consumer and consumer relations, corporate image, ecology, education,…

19 CFR 122.48a - Electronic information for air cargo required in advance of arrival.

Code of Federal Regulations, 2012 CFR

2012-04-01

... data for incoming cargo that is listed in paragraph (d)(2) of this section: (i) An Automated Broker... based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each would... quantity based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each...

19 CFR 122.48a - Electronic information for air cargo required in advance of arrival.

Code of Federal Regulations, 2014 CFR

2014-04-01

... data for incoming cargo that is listed in paragraph (d)(2) of this section: (i) An Automated Broker... based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each would... quantity based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each...

19 CFR 122.48a - Electronic information for air cargo required in advance of arrival.

Code of Federal Regulations, 2013 CFR

2013-04-01

... data for incoming cargo that is listed in paragraph (d)(2) of this section: (i) An Automated Broker... based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each would... quantity based on the smallest external packing unit (M) (for example, 2 pallets containing 50 pieces each...

Automated Speech Intelligibility System for Head-Borne Personal Protective Equipment: Proof of Concept

DTIC Science & Technology

2008-04-01

selected as the listener headform for this effort. The HATS has binaural sound quality microphones inserted into the ear canals and rubber pinnae that...Blank 16 APPENDIX - WORD LISTS AND SUBJECT RESPONSES MRT Set 1 (spoken word is in bold type) kick, lick, sick, tick, wick, pick neat, beat , seat, meat

78 FR 60898 - Regulation on Definition and Requirements for a Nationally Recognized Testing Laboratory...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... organizations must follow to apply for, and to maintain, OSHA's recognition to test and certify equipment... procedures that organizations must follow to apply for, and to maintain, OSHA's recognition to test and... practicable, the forms will provide for automations such as drop down lists to increase ease of use and reduce...

Film Processing Module for Automated Fiber Placement

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce

2004-01-01

This viewgraph presentation describes fiber placement technology which was originally developed by Marshall Space Flight Center (MSFC) for the fabrication of fiber composite propellant tanks. The presentation includes an image of the MSFC Fiber Placement Machine, which is a prototype test bed, and images of some of the machine's parts. Some possible applications for the machines are listed.

World Wide Web Indexes and Hierarchical Lists: Finding Tools for the Internet.

ERIC Educational Resources Information Center

Munson, Kurt I.

1996-01-01

In World Wide Web indexing: (1) the creation process is automated; (2) the indexes are merely descriptive, not analytical of document content; (3) results may be sorted differently depending on the search engine; and (4) indexes link directly to the resources. This article compares the indexing methods and querying options of the search engines…

IMS - MS Data Extractor

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-10-20

An automated drift time extraction and computed associated collision cross section software tool for small molecule analysis with ion mobility spectrometry-mass spectrometry (IMS-MS). The software automatically extracts drift times and computes associated collision cross sections for small molecules analyzed using ion mobility spectrometry-mass spectrometry (IMS-MS) based on a target list of expected ions provided by the user.

Generic worklist handler for workflow-enabled products

NASA Astrophysics Data System (ADS)

Schmidt, Joachim; Meetz, Kirsten; Wendler, Thomas

1999-07-01

Workflow management (WfM) is an emerging field of medical information technology. It appears as a promising key technology to model, optimize and automate processes, for the sake of improved efficiency, reduced costs and improved patient care. The Application of WfM concepts requires the standardization of architectures and interfaces. A component of central interest proposed in this report is a generic work list handler: A standardized interface between a workflow enactment service and application system. Application systems with embedded work list handlers will be called 'Workflow Enabled Application Systems'. In this paper we discus functional requirements of work list handlers, as well as their integration into workflow architectures and interfaces. To lay the foundation for this specification, basic workflow terminology, the fundamentals of workflow management and - later in the paper - the available standards as defined by the Workflow Management Coalition are briefly reviewed.

Office automation: The administrative window into the integrated DBMS

NASA Technical Reports Server (NTRS)

Brock, G. H.

1985-01-01

In parallel to the evolution of Management Information Systems from simple data files to complex data bases, the stand-alone computer systems have been migrating toward fully integrated systems serving the work force. The next major productivity gain may very well be to make these highly sophisticated working level Data Base Management Systems (DMBS) serve all levels of management with reports of varying levels of detail. Most attempts by the DBMS development organization to provide useful information to management seem to bog down in the quagmire of competing working level requirements. Most large DBMS development organizations possess three to five year backlogs. Perhaps Office Automation is the vehicle that brings to pass the Management Information System that really serves management. A good office automation system manned by a team of facilitators seeking opportunities to serve end-users could go a long way toward defining a DBMS that serves management. This paper will briefly discuss the problems of the DBMS organization, alternative approaches to solving some of the major problems, a debate about problems that may have no solution, and finally how office automation fits into the development of the Manager's Management Information System.

Computerized controlled-substance surveillance: application involving automated storage and distribution cabinets.

PubMed

Wellman, G S; Hammond, R L; Talmage, R

2001-10-01

A secondary data-reporting system used to scan the archives of a hospital's automated storage and distribution cabinets (ASDCs) for indications of controlled-substance diversion is described. ASDCs, which allow access to multiple doses of the same medication at one time, use drug count verification to ensure complete audits and disposition tracking. Because an ASDC may interpret inappropriate removal of a medication as a normal transaction, users of ASDCs should have a comprehensive plan for detecting and investigating controlled-substance diversion. Monitoring for and detecting diversion can be difficult and time-consuming, given the limited report-generating features of many ASDCs. Managers at an 800-bed hospital used report-writing software to address these problems. This application interfaces with the hospital's computer system and generates customized reports. The monthly activity recapitulation report lists each user of the ASDCs and gives a summary of all the controlled-substance transactions for those users for the time period specified. The monthly summary report provides the backbone of the surveillance system and identifies situations that require further audit and review. This report provides a summary of each user's activity for a specific medication for the time period specified. The detailed summary report allows for efficient review of specific transactions before there is a decision to conduct a chart review. This report identifies all ASDC controlled-substance transactions associated with a user. A computerized report-generating system identifies instances of inappropriate removal of controlled substances from a hospital's ASDCs.

Investigating mode errors on automated flight decks: illustrating the problem-driven, cumulative, and interdisciplinary nature of human factors research.

PubMed

Sarter, Nadine

2008-06-01

The goal of this article is to illustrate the problem-driven, cumulative, and highly interdisciplinary nature of human factors research by providing a brief overview of the work on mode errors on modern flight decks over the past two decades. Mode errors on modem flight decks were first reported in the late 1980s. Poor feedback, inadequate mental models of the automation, and the high degree of coupling and complexity of flight deck systems were identified as main contributors to these breakdowns in human-automation interaction. Various improvements of design, training, and procedures were proposed to address these issues. The author describes when and why the problem of mode errors surfaced, summarizes complementary research activities that helped identify and understand the contributing factors to mode errors, and describes some countermeasures that have been developed in recent years. This brief review illustrates how one particular human factors problem in the aviation domain enabled various disciplines and methodological approaches to contribute to a better understanding of, as well as provide better support for, effective human-automation coordination. Converging operations and interdisciplinary collaboration over an extended period of time are hallmarks of successful human factors research. The reported body of research can serve as a model for future research and as a teaching tool for students in this field of work.

Problem Patron Manual.

ERIC Educational Resources Information Center

Brown, Marion, Comp.; And Others

This document presents guidelines for handling disruptive behavior in the Schenectady County Public Library (New York). Specific responses are listed for dealing with questions about library selection policy and sudden patron illness or injury. Also listed are responses to problem situations involving angry or irate patrons, assault or physically…

Automated Blazar Light Curves Using Machine Learning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Spencer James

2017-07-27

This presentation describes a problem and methodology pertaining to automated blazar light curves. Namely, optical variability patterns for blazars require the construction of light curves and in order to generate the light curves, data must be filtered before processing to ensure quality.

Web-Based Fully Automated Self-Help With Different Levels of Therapist Support for Individuals With Eating Disorder Symptoms: A Randomized Controlled Trial

PubMed Central

Dingemans, Alexandra E; Spinhoven, Philip; van Ginkel, Joost R; de Rooij, Mark; van Furth, Eric F

2016-01-01

Background Despite the disabling nature of eating disorders (EDs), many individuals with ED symptoms do not receive appropriate mental health care. Internet-based interventions have potential to reduce the unmet needs by providing easily accessible health care services. Objective This study aimed to investigate the effectiveness of an Internet-based intervention for individuals with ED symptoms, called “Featback.” In addition, the added value of different intensities of therapist support was investigated. Methods Participants (N=354) were aged 16 years or older with self-reported ED symptoms, including symptoms of anorexia nervosa, bulimia nervosa, and binge eating disorder. Participants were recruited via the website of Featback and the website of a Dutch pro-recovery–focused e-community for young women with ED problems. Participants were randomized to: (1) Featback, consisting of psychoeducation and a fully automated self-monitoring and feedback system, (2) Featback supplemented with low-intensity (weekly) digital therapist support, (3) Featback supplemented with high-intensity (3 times a week) digital therapist support, and (4) a waiting list control condition. Internet-administered self-report questionnaires were completed at baseline, post-intervention (ie, 8 weeks after baseline), and at 3- and 6-month follow-up. The primary outcome measure was ED psychopathology. Secondary outcome measures were symptoms of depression and anxiety, perseverative thinking, and ED-related quality of life. Statistical analyses were conducted according to an intent-to-treat approach using linear mixed models. Results The 3 Featback conditions were superior to a waiting list in reducing bulimic psychopathology (d=−0.16, 95% confidence interval (CI)=−0.31 to −0.01), symptoms of depression and anxiety (d=−0.28, 95% CI=−0.45 to −0.11), and perseverative thinking (d=−0.28, 95% CI=−0.45 to −0.11). No added value of therapist support was found in terms of symptom reduction although participants who received therapist support were significantly more satisfied with the intervention than those who did not receive supplemental therapist support. No significant differences between the Featback conditions supplemented with low- and high-intensity therapist support were found regarding the effectiveness and satisfaction with the intervention. Conclusions The fully automated Internet-based self-monitoring and feedback intervention Featback was effective in reducing ED and comorbid psychopathology. Supplemental therapist support enhanced satisfaction with the intervention but did not increase its effectiveness. Automated interventions such as Featback can provide widely disseminable and easily accessible care. Such interventions could be incorporated within a stepped-care approach in the treatment of EDs and help to bridge the gap between mental disorders and mental health care services. Trial Registration Netherlands Trial Registry: NTR3646; http://www.trialregister.nl/trialreg/admin/ rctview.asp?TC=3646 (Archived by WebCite at http://www.webcitation.org/6fgHTGKHE) PMID:27317358

Review and synthesis of problems and directions for large scale geographic information system development

NASA Technical Reports Server (NTRS)

Boyle, A. R.; Dangermond, J.; Marble, D.; Simonett, D. S.; Tomlinson, R. F.

1983-01-01

Problems and directions for large scale geographic information system development were reviewed and the general problems associated with automated geographic information systems and spatial data handling were addressed.

Automated Planning for a Deep Space Communications Station

NASA Technical Reports Server (NTRS)

Estlin, Tara; Fisher, Forest; Mutz, Darren; Chien, Steve

1999-01-01

This paper describes the application of Artificial Intelligence planning techniques to the problem of antenna track plan generation for a NASA Deep Space Communications Station. Me described system enables an antenna communications station to automatically respond to a set of tracking goals by correctly configuring the appropriate hardware and software to provide the requested communication services. To perform this task, the Automated Scheduling and Planning Environment (ASPEN) has been applied to automatically produce antenna trucking plans that are tailored to support a set of input goals. In this paper, we describe the antenna automation problem, the ASPEN planning and scheduling system, how ASPEN is used to generate antenna track plans, the results of several technology demonstrations, and future work utilizing dynamic planning technology.

Automated assembly in space

NASA Technical Reports Server (NTRS)

Srivastava, Sandanand; Dwivedi, Suren N.; Soon, Toh Teck; Bandi, Reddy; Banerjee, Soumen; Hughes, Cecilia

1989-01-01

The installation of robots and their use of assembly in space will create an exciting and promising future for the U.S. Space Program. The concept of assembly in space is very complicated and error prone and it is not possible unless the various parts and modules are suitably designed for automation. Certain guidelines are developed for part designing and for an easy precision assembly. Major design problems associated with automated assembly are considered and solutions to resolve these problems are evaluated in the guidelines format. Methods for gripping and methods for part feeding are developed with regard to the absence of gravity in space. The guidelines for part orientation, adjustments, compliances and various assembly construction are discussed. Design modifications of various fasteners and fastening methods are also investigated.

[Problems encountered during the installation of an automated anesthesia documentation system (AIMS)].

PubMed

Müller, H; Naujoks, F; Dietz, S

2002-08-01

Problems encountered during the installation and introduction of an automated anaesthesia documentation system are discussed. Difficulties have to be expected in the area of staff training because of heterogeneous experience in computer usage and in the field of online documentation of vital signs. Moreover the areas of net administration and hardware configuration as well as general administrative issues also represent possible sources of drawbacks. System administration and reliable support provided by personnel of the department of anaesthesiology assuring staff motivation and reducing time of system failures require adequately staffed departments. Based on our own experiences, we recommend that anaesthesiology departments considering the future installation and use of an automated anaesthesia documentation system should verify sufficient personnel capacities prior to their decision.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitledge, T.E.; Malloy, S.C.; Patton, C.J.

This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The threemore » appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)« less

[Complex technology for water and wastewater disinfection and its industrial realization in prototype unit].

PubMed

Arakcheev, E N; Brunman, V E; Brunman, M V; Konyashin, A V; Dyachenko, V A; Petkova, A P

Usage of complex automated electrolysis unit for drinking water disinfection and wastewater oxidation and coagulation is scoped, its ecological and energy efficiency is shown. Properties of technological process of anolyte production using membrane electrolysis of brine for water disinfection in municipal pipelines and potassium ferrate production using electrochemical dissolution of iron anode in NaOH solution for usage in purification plants are listed. Construction of modules of industrial prototype for anolyte and ferrate production and applied aspects of automation of complex electrolysis unit are proved. Results of approbation of electrolytic potassium ferrate for drinking water disinfection and wastewater, rain water and environmental water oxidation and coagulation are shown.

Automated structural classification of lipids by machine learning.

PubMed

Taylor, Ryan; Miller, Ryan H; Miller, Ryan D; Porter, Michael; Dalgleish, James; Prince, John T

2015-03-01

Modern lipidomics is largely dependent upon structural ontologies because of the great diversity exhibited in the lipidome, but no automated lipid classification exists to facilitate this partitioning. The size of the putative lipidome far exceeds the number currently classified, despite a decade of work. Automated classification would benefit ongoing classification efforts by decreasing the time needed and increasing the accuracy of classification while providing classifications for mass spectral identification algorithms. We introduce a tool that automates classification into the LIPID MAPS ontology of known lipids with >95% accuracy and novel lipids with 63% accuracy. The classification is based upon simple chemical characteristics and modern machine learning algorithms. The decision trees produced are intelligible and can be used to clarify implicit assumptions about the current LIPID MAPS classification scheme. These characteristics and decision trees are made available to facilitate alternative implementations. We also discovered many hundreds of lipids that are currently misclassified in the LIPID MAPS database, strongly underscoring the need for automated classification. Source code and chemical characteristic lists as SMARTS search strings are available under an open-source license at https://www.github.com/princelab/lipid_classifier. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Assessing Personality and Mood With Adjective Check List Methodology: A Review

ERIC Educational Resources Information Center

Craig, Robert J.

2005-01-01

This article addresses the benefits and problems in using adjective check list methodology to assess personality. Recent developments in this assessment method are reviewed, emphasizing seminal adjective-based personality tests (Gough's Adjective Check List), mood tests (Lubin's Depressive Adjective Test, Multiple Affect Adjective Check List),…

Documentation: Motivation and training or automation

NASA Technical Reports Server (NTRS)

Mouton, M. L.

1970-01-01

The road blocks and mental blocks in areas where automation is not taking care of basic documentation problems are discussed. Original project documentation, documentation for project maintenance, and comparison of preliminary and final documentation are described. The use of flow charts is also mentioned.

Automated Bus Diagnostic System Demonstration in New York City

DOT National Transportation Integrated Search

1983-12-01

In response to a growing problem with the quality and efficiency of nationwide bus maintenance practices, an award was granted to the Tri-State Regional Planning Commission for the testing of an automated bus diagnostic system (ABDS). The ABDS was de...

Proposed Conceptual Requirements for the CTBT Knowledge Base,

DTIC Science & Technology

1995-08-14

knowledge available to automated processing routines and human analysts are significant, and solving these problems is an essential step in ensuring...knowledge storage in a CTBT system. In addition to providing regional knowledge to automated processing routines, the knowledge base will also address

Team-Centered Perspective for Adaptive Automation Design

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III

2003-01-01

Automation represents a very active area of human factors research. The journal, Human Factors, published a special issue on automation in 1985. Since then, hundreds of scientific studies have been published examining the nature of automation and its interaction with human performance. However, despite a dramatic increase in research investigating human factors issues in aviation automation, there remain areas that need further exploration. This NASA Technical Memorandum describes a new area of automation design and research, called adaptive automation. It discusses the concepts and outlines the human factors issues associated with the new method of adaptive function allocation. The primary focus is on human-centered design, and specifically on ensuring that adaptive automation is from a team-centered perspective. The document shows that adaptive automation has many human factors issues common to traditional automation design. Much like the introduction of other new technologies and paradigm shifts, adaptive automation presents an opportunity to remediate current problems but poses new ones for human-automation interaction in aerospace operations. The review here is intended to communicate the philosophical perspective and direction of adaptive automation research conducted under the Aerospace Operations Systems (AOS), Physiological and Psychological Stressors and Factors (PPSF) project.

Building blocks for automated elucidation of metabolites: natural product-likeness for candidate ranking.

PubMed

Jayaseelan, Kalai Vanii; Steinbeck, Christoph

2014-07-05

In metabolomics experiments, spectral fingerprints of metabolites with no known structural identity are detected routinely. Computer-assisted structure elucidation (CASE) has been used to determine the structural identities of unknown compounds. It is generally accepted that a single 1D NMR spectrum or mass spectrum is usually not sufficient to establish the identity of a hitherto unknown compound. When a suite of spectra from 1D and 2D NMR experiments supplemented with a molecular formula are available, the successful elucidation of the chemical structure for candidates with up to 30 heavy atoms has been reported previously by one of the authors. In high-throughput metabolomics, usually 1D NMR or mass spectrometry experiments alone are conducted for rapid analysis of samples. This method subsequently requires that the spectral patterns are analyzed automatically to quickly identify known and unknown structures. In this study, we investigated whether additional existing knowledge, such as the fact that the unknown compound is a natural product, can be used to improve the ranking of the correct structure in the result list after the structure elucidation process. To identify unknowns using as little spectroscopic information as possible, we implemented an evolutionary algorithm-based CASE mechanism to elucidate candidates in a fully automated fashion, with input of the molecular formula and 13C NMR spectrum of the isolated compound. We also tested how filters like natural product-likeness, a measure that calculates the similarity of the compounds to known natural product space, might enhance the performance and quality of the structure elucidation. The evolutionary algorithm is implemented within the SENECA package for CASE reported previously, and is available for free download under artistic license at http://sourceforge.net/projects/seneca/. The natural product-likeness calculator is incorporated as a plugin within SENECA and is available as a GUI client and command-line executable. Significant improvements in candidate ranking were demonstrated for 41 small test molecules when the CASE system was supplemented by a natural product-likeness filter. In spectroscopically underdetermined structure elucidation problems, natural product-likeness can contribute to a better ranking of the correct structure in the results list.

Persons Interested in Rural Texas. Revised.

ERIC Educational Resources Information Center

Hunsicker, Alma, Comp.; And Others

The directory was compiled to provide individuals and groups working with problems concerning rural Texas with a list of resource persons who could be of assistance in the resolution of these problems, and to encourage individuals with similar areas of interest/expertise to share information with each other. Listed alphabetically by five…

A standalone Internet cognitive behavior therapy treatment for social anxiety in adults who stutter: CBTpsych.

PubMed

Helgadóttir, Fjóla Dögg; Menzies, Ross G; Onslow, Mark; Packman, Ann; O'Brian, Sue

2014-09-01

Social anxiety is common for those who stutter and efficacious cognitive behavior therapy (CBT) for them appears viable. However, there are difficulties with provision of CBT services for anxiety among those who stutter. Standalone Internet CBT treatment is a potential solution to those problems. CBTpsych is a fully automated, online social anxiety intervention for those who stutter. This report is a Phase I trial of CBTpsych. Fourteen participants were allowed 5 months to complete seven sections of CBTpsych. Pre-treatment and post-treatment assessments tested for social anxiety, common unhelpful thoughts related to stuttering, quality of life and stuttering frequency. Significant post-treatment improvements in social anxiety, unhelpful thoughts, and quality of life were reported. Five of seven participants diagnosed with social anxiety lost those diagnoses at post-treatment. The two participants who did not lose social anxiety diagnoses did not complete all the CBTpsych modules. CBTpsych did not improve stuttering frequency. Eleven of the fourteen participants who began treatment completed Section 4 or more of the CBTpsych intervention. CBTpsych provides a potential means to provide CBT treatment for social anxiety associated with stuttering, to any client without cost, regardless of location. Further clinical trials are warranted. At the end of this activity the reader will be able to: (a) describe that social anxiety is common in those who stutter; (b) discuss the origin of social anxiety and the associated link with bullying; (c) summarize the problems in provision of effective evidence based cognitive behavior therapy for adults who stutter; (d) describe a scalable computerized treatment designed to tackle the service provision gap; (e) describe the unhelpful thoughts associated with stuttering that this fully automated computer program was able to tackle; (f) list the positive outcomes for individuals who stuttered that participated in this trial such as the reduction of social anxiety symptoms and improvement in the quality of life for individuals who stuttered and participated in this trial. Copyright © 2014 Elsevier Inc. All rights reserved.

Charting the landscape of priority problems in psychiatry, part 1: classification and diagnosis.

PubMed

Stephan, Klaas E; Bach, Dominik R; Fletcher, Paul C; Flint, Jonathan; Frank, Michael J; Friston, Karl J; Heinz, Andreas; Huys, Quentin J M; Owen, Michael J; Binder, Elisabeth B; Dayan, Peter; Johnstone, Eve C; Meyer-Lindenberg, Andreas; Montague, P Read; Schnyder, Ulrich; Wang, Xiao-Jing; Breakspear, Michael

2016-01-01

Contemporary psychiatry faces major challenges. Its syndrome-based disease classification is not based on mechanisms and does not guide treatment, which largely depends on trial and error. The development of therapies is hindered by ignorance of potential beneficiary patient subgroups. Neuroscientific and genetics research have yet to affect disease definitions or contribute to clinical decision making. In this challenging setting, what should psychiatric research focus on? In two companion papers, we present a list of problems nominated by clinicians and researchers from different disciplines as candidates for future scientific investigation of mental disorders. These problems are loosely grouped into challenges concerning nosology and diagnosis (this Personal View) and problems related to pathogenesis and aetiology (in the companion Personal View). Motivated by successful examples in other disciplines, particularly the list of Hilbert's problems in mathematics, this subjective and eclectic list of priority problems is intended for psychiatric researchers, helping to re-focus existing research and providing perspectives for future psychiatric science. Copyright © 2016 Elsevier Ltd. All rights reserved.

Crew Integration & Automation Testbed and Robotic Follower Programs

DTIC Science & Technology

2001-05-30

Evolving Technologies for Reduced Crew Operation” Vehicle Tech Demo #1 (VTT) Vehicle Tech Demo #2 ( CAT ATD) Two Man Transition Future Combat...Simulation Advanced Electronic Architecture Concept Vehicle Shown with Onboard Safety Driver Advanced Interfaces CAT ATD Exit Criteria...Provide 1000 Hz control loop for critical real-time tasks CAT Workload IPT Process and Product Schedule Crew Task List Task Timelines Workload Analysis

Collection Growth, Expenditures, and Automation in Academic Libraries: A Preliminary Inquiry.

ERIC Educational Resources Information Center

Werking, Richard Hume

A study was conducted to examine library data and trends among a group of 42 liberal arts colleges known as the "Bowdoin List." Questionnaires were completed and returned by 35 of the colleges, and interviews were conducted with the library directors at 22 of the colleges. The first of 10 sections in this report presents the statistical…

Micropropagation. (Latest citations from the Life Sciences Collection database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-01-01

The bibliography contains citations concerning micropropagation of various plants. Topics examine micropropagation culture media, automation systems, use of growth stimulants and cytokinins, industrial micropropagation, and production of disease-free plants. Micropropagation of ornamental trees, potato, blueberry, apple, algae, citrus, grape, and gymnosperms are described. (Contains a minimum of 61 citations and includes a subject term index and title list.)

32 CFR 635.18 - Identifying criminal incidents and subjects of investigation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... reported as the subject of an offense on DA Form 3975 when credible information exists that the person or... actions will not be based solely on the listing of an individual or legal entity as a subject on DA Form... entity is entered in the subject block of the DA Form 3975, their identity is recorded in DA automated...

An expert system for choosing the best combination of options in a general purpose program for automated design synthesis

NASA Technical Reports Server (NTRS)

Rogers, J. L.; Barthelemy, J.-F. M.

1986-01-01

An expert system called EXADS has been developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. ADS has approximately 100 combinations of strategy, optimizer, and one-dimensional search options from which to choose. It is difficult for a nonexpert to make this choice. This expert system aids the user in choosing the best combination of options based on the users knowledge of the problem and the expert knowledge stored in the knowledge base. The knowledge base is divided into three categories; constrained problems, unconstrained problems, and constrained problems being treated as unconstrained problems. The inference engine and rules are written in LISP, contains about 200 rules, and executes on DEC-VAX (with Franz-LISP) and IBM PC (with IQ-LISP) computers.

Microcomputers in Library Automation.

ERIC Educational Resources Information Center

Simpson, George A.

As librarians cope with reduced budgets, decreased staff, and increased demands for services, microcomputers will take a significant role in library automation by providing low-cost systems, solving specific library problems, and performing in distributed systems. This report presents an introduction to the technology of this low-cost, miniature…

Pricing Structures for Automated Library Consortia.

ERIC Educational Resources Information Center

Machovec, George S.

1993-01-01

Discusses the development of successful pricing algorithms for cooperative library automation projects. Highlights include desirable characteristics of pricing measures, including simplicity and the ability to allow for system growth; problems with transaction-based systems; and a review of the pricing strategies of seven library consortia.…

Robotic Automation of In Vivo Two-Photon Targeted Whole-Cell Patch-Clamp Electrophysiology.

PubMed

Annecchino, Luca A; Morris, Alexander R; Copeland, Caroline S; Agabi, Oshiorenoya E; Chadderton, Paul; Schultz, Simon R

2017-08-30

Whole-cell patch-clamp electrophysiological recording is a powerful technique for studying cellular function. While in vivo patch-clamp recording has recently benefited from automation, it is normally performed "blind," meaning that throughput for sampling some genetically or morphologically defined cell types is unacceptably low. One solution to this problem is to use two-photon microscopy to target fluorescently labeled neurons. Combining this with robotic automation is difficult, however, as micropipette penetration induces tissue deformation, moving target cells from their initial location. Here we describe a platform for automated two-photon targeted patch-clamp recording, which solves this problem by making use of a closed loop visual servo algorithm. Our system keeps the target cell in focus while iteratively adjusting the pipette approach trajectory to compensate for tissue motion. We demonstrate platform validation with patch-clamp recordings from a variety of cells in the mouse neocortex and cerebellum. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Korean Air Lines Flight 007: Lessons from the Past and Insights for the Future

NASA Technical Reports Server (NTRS)

Degani, Asaf; Shafto, M. (Technical Monitor)

2001-01-01

The majority of the problems pilot encounter when using automated systems center around two factors: (1) the pilot has an incomplete and inadequate model of how the autopilot works; and (2) the displays and flight manuals, provided to the pilot, are inadequate for the task. The tragic accident of Korean Air Lines Flight 007, a Boeing 747 that deviated from its intended flight path, provides a compelling case-study of problems related to pilots' use of automated systems. This paper describes what had happened and exposes two types of human-automation interaction problems: (1) The pilots of KAL were not provided with adequate information about the actual behavior of the autopilot and its mode transition logic; and (2) The autopilot onboard KAL 007 did not provide adequate information to the flight crew about its active and armed modes. Both factors, according to the International Civil Aviation Organization (1993) report on the accident, contributed to the aircraft's lethal navigation error.

Visualization for Hyper-Heuristics. Front-End Graphical User Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kroenung, Lauren

Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. While such automated design has great advantages, it can often be difficult to understand exactly how a design was derived and why it should be trusted. This project aims to address thesemore » issues of usability by creating an easy-to-use graphical user interface (GUI) for hyper-heuristics to support practitioners, as well as scientific visualization of the produced automated designs. My contributions to this project are exhibited in the user-facing portion of the developed system and the detailed scientific visualizations created from back-end data.« less

Preliminary Results from the Application of Automated Adjoint Code Generation to CFL3D

NASA Technical Reports Server (NTRS)

Carle, Alan; Fagan, Mike; Green, Lawrence L.

1998-01-01

This report describes preliminary results obtained using an automated adjoint code generator for Fortran to augment a widely-used computational fluid dynamics flow solver to compute derivatives. These preliminary results with this augmented code suggest that, even in its infancy, the automated adjoint code generator can accurately and efficiently deliver derivatives for use in transonic Euler-based aerodynamic shape optimization problems with hundreds to thousands of independent design variables.

Office Automation: A Look Beyond Word Processing.

DTIC Science & Technology

1983-06-01

implying the type and nature of work performed by white-collar employees , and "products" will denote the techniques and type of equipment necessary...REPORT & PERIOD COVERED Office Automation: A Look Beyond Master’s Thesis Word Processing June 1983 6. PERFORMING ORG. REPORT NUMUER 7. AUTYOH) S...look at the problems of implementing an automated office and the possible impact it can have on human office workers. The purpose of this thesis is thus

Automated Decision Making and Problem Solving. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

Heer, E.

1981-01-01

The May 1980 conference is summarized. Related topics in artificial intelligence, operations research, and control theory were explored. Existing techniques were assessed, trends of development determined, and potential for application in NASA automation technology programs were identified. Formal presentations were made by experts in the three disciplines nd a workshop was held in which current technology in automation and possible NASA interfaces with the academic community to advance this technology were discussed.

Low Cost Structures, but How Much are we Paying for Them?

NASA Astrophysics Data System (ADS)

Gomez Molinero, Vincent

2014-06-01

Based on more than 37 years developing spacecraft structures - both for launchers starting with Ariane-1 up to the most modern ones and for satellites of any type - a critical review of the current trends, aiming specially to low cost solutions, will be presented.Airbus Defence and Space (CASA Espacio previously) has been developing structures for launchers and satellites during more than 4 decades. All types of spacecraft structures - primary and secondary ones, high stability ones and special critical cases like antenna reflectors, high stiffness structures and load carrying ones - have been developed using different types of materials and structural constructions. Although our main expertise is concentrated on composite structures, we have also developed many types of metallic ones, when the best solution was that one, not necessarily only based on pure technical reasons.From that perspective and experience, this paper tries to review the current trend of imposing the low cost as the main requirement for the development of satellites and launchers and its intrinsic characteristic of being a non- ending process: the spacecraft structures are never sufficiently cheaper.The main ways used today to justify low cost spacecraft structures will be reviewed trying to understand their rationale and some prejudices always present when the trade-off studies are performed. Some of the reviewed cost-killing factors will be (non-exhaustive list) Material type (i.e.: metallic vs composite). Low cost materials in general. Manufacturing process (i.e.: autoclave curing vs out-of-autoclave one). Automation in manufacturing. Automation in assembly. Automation in inspection and verification. Lean manufacturing techniques. Standardization. Some insight about how to solve this problem without losing our distinctive nature (we are developing high performance systems many of them unique prototypes and thought to work in environments not perfectly known and highly unknown in some cases) will be provided from the author's point of view.

Do screencasts help to revise prerequisite mathematics? An investigation of student performance and perception

NASA Astrophysics Data System (ADS)

Loch, Birgit; Jordan, Camilla R.; Lowe, Tim W.; Mestel, Ben D.

2014-02-01

Basic calculus skills that are prerequisites for advanced mathematical studies continue to be a problem for a significant proportion of higher education students. While there are many types of revision material that could be offered to students, in this paper we investigate whether short, narrated video recordings of mathematical explanations (screencasts) are a useful tool to enhance student learning when revisiting prerequisite topics. We report on the outcomes of a study that was designed to both measure change in student performance before and after watching screencasts, and to capture students' perception of the usefulness of screencasts in their learning. Volunteers were recruited from students enrolled on an entry module for the Mathematics Master of Science programme at the Open University to watch two screencasts sandwiched between two online calculus quizzes. A statistical analysis of student responses to the quizzes shows that screencasts can have a positive effect on student performance. Further analysis of student feedback shows that student confidence was increased by watching the screencasts. Student views on the value of screencasts for their learning indicated that they appreciated being able to watch a problem being solved and explained by an experienced mathematician; hear the motivation for a particular problem-solving approach; engage more readily with the material being presented, thereby retaining it more easily. The positive student views and impact on student scores indicate that short screencasts could play a useful role in revising prerequisite mathematics.

Socio-demographic determinants of hearing impairment studied in 103,835 term babies.

PubMed

Van Kerschaver, Erwin; Boudewyns, An N; Declau, Frank; Van de Heyning, Paul H; Wuyts, Floris L

2013-02-01

Serious hearing problems appear in approximately one in 1000 newborns. In 2000, the Joint Committee on Infant Hearing defined a list of risk factors for neonatal hearing impairment relating to health, physical characteristics and family history. The aim of this study is to determine which personal, environmental and social factors are associated with the prevalence of congenital hearing impairment (CHI). The entire population of 103,835 term newborns in Flanders, Belgium, was tested by a universal neonatal hearing screening (UNHS) programme using automated auditory brainstem responses (AABR). In the case of a positive result, a CHI diagnosis was verified in specialized referral centres. Socio-demographic risk factors were investigated across the entire population to study any relationship with CHI. The prevalence of bilateral CHI of 35 dB nHL (normal hearing level) or more was 0.87/1000 newborns. The sensitivity and specificity of the screening test were 94.02 and 99.96%, respectively. The socio-demographic factors of gender, birth order, birth length, feeding type, level of education and origin of the mother were found to be independent predictors of CHI. The socio-demographic factors found to be associated with CHI extend the list of classic risk factors as defined by the American Academy of Pediatrics (AAP). Assessment of these additional factors may alert the treating physician to the increased risk of newborn hearing impairment and urge the need for accurate follow-up. Moreover, this extended assessment may improve decision making in medical practice and screening policy.

Hemispheric Preference and Cyclic Variation of Solar Filament Chirality

NASA Astrophysics Data System (ADS)

Hazra, Soumitra; Mahajan, Sushant S.; Douglas, William; Martens, Petrus C.

2017-08-01

Although the hemispheric preference of magnetic topological features in the solar atmosphere is a well-established fact, strength and cyclic variation of the hemispheric rule is a debatable issue. In this work, we study the chirality of 3480 solar filaments from 2000 to 2016. We determine the chirality of filaments manually and compare with the results obtained from the Advanced Automated Filament Detection and Characterization Code (AAFDCC). We find that 83% of our manually determined filaments follow the hemispheric chirality rule, while 58% of automatically determined filamentsfollow the same. We also compare our result with an other manually compiled list by Pevtsov et al. (2003). We find that our list matches Pevtsovs manually compiled list with 90% accuracy. We also find that the hemispheric chirality rule does not vary from cycle to cycle. However, the strength of the hemispheric preference decreases at the end and beginning phase of the solar cycle.

Supporting Red List threat assessments with GeoCAT: geospatial conservation assessment tool.

PubMed

Bachman, Steven; Moat, Justin; Hill, Andrew W; de Torre, Javier; Scott, Ben

2011-01-01

GeoCAT is an open source, browser based tool that performs rapid geospatial analysis to ease the process of Red Listing taxa. Developed to utilise spatially referenced primary occurrence data, the analysis focuses on two aspects of the geographic range of a taxon: the extent of occurrence (EOO) and the area of occupancy (AOO). These metrics form part of the IUCN Red List categories and criteria and have often proved challenging to obtain in an accurate, consistent and repeatable way. Within a familiar Google Maps environment, GeoCAT users can quickly and easily combine data from multiple sources such as GBIF, Flickr and Scratchpads as well as user generated occurrence data. Analysis is done with the click of a button and is visualised instantly, providing an indication of the Red List threat rating, subject to meeting the full requirements of the criteria. Outputs including the results, data and parameters used for analysis are stored in a GeoCAT file that can be easily reloaded or shared with collaborators. GeoCAT is a first step toward automating the data handling process of Red List assessing and provides a valuable hub from which further developments and enhancements can be spawned.

MaRiMba: A Software Application for Spectral Library-Based MRM Transition List Assembly

PubMed Central

Sherwood, Carly A.; Eastham, Ashley; Lee, Lik Wee; Peterson, Amelia; Eng, Jimmy K.; Shteynberg, David; Mendoza, Luis; Deutsch, Eric W.; Risler, Jenni; Tasman, Natalie; Aebersold, Ruedi; Lam, Henry; Martin, Daniel B.

2009-01-01

Multiple reaction monitoring mass spectrometry (MRM-MS) is a targeted analysis method that has been increasingly viewed as an avenue to explore proteomes with unprecedented sensitivity and throughput. We have developed a software tool, called MaRiMba, to automate the creation of explicitly defined MRM transition lists required to program triple quadrupole mass spectrometers in such analyses. MaRiMba creates MRM transition lists from downloaded or custom-built spectral libraries, restricts output to specified proteins or peptides, and filters based on precursor peptide and product ion properties. MaRiMba can also create MRM lists containing corresponding transitions for isotopically heavy peptides, for which the precursor and product ions are adjusted according to user specifications. This open-source application is operated through a graphical user interface incorporated into the Trans-Proteomic Pipeline, and it outputs the final MRM list to a text file for upload to MS instruments. To illustrate the use of MaRiMba, we used the tool to design and execute an MRM-MS experiment in which we targeted the proteins of a well-defined and previously published standard mixture. PMID:19603829

The Cognitive Consequences of Patterns of Information Flow

NASA Technical Reports Server (NTRS)

Hutchins, Edwin

1999-01-01

The flight deck of a modern commercial airliner is a complex system consisting of two or more crew and a suite of technological devices. The flight deck of the state-of-the-art Boeing 747-400 is shown. When everything goes right, all modern flight decks are easy to use. When things go sour, however, automated flight decks provide opportunities for new kinds of problems. A recent article in Aviation Week cited industry concern over the problem of verifying the safety of complex systems on automated, digital aircraft, stating that the industry must "guard against the kind of incident in which people and the automation seem to mismanage a minor occurrence or non-routine situation into larger trouble." The design of automated flight deck systems that flight crews find easy to use safely is a challenge in part because this design activity requires a theoretical perspective which can simultaneously cover the interactions of people with each other and with technology. In this paper, some concepts that can be used to understand the flight deck as a system that is composed of two or more pilots and a complex suite of automated devices is introduced.

Consumer Education Resources: Credit, Credit Problems, Home Mortgages & Equity Loans.

ERIC Educational Resources Information Center

Eastern Michigan Univ., Ypsilanti. National Inst. for Consumer Education.

This document contains five lists of consumer resources pertaining to credit, credit problems, and home mortgages and equity loans. The first list, targeted at adults, provides information on general credit, applying for credit and contracts, seniors and women and credit, credit options and costs, credit protection, credit reports and bureaus, and…

A Partial List of Educational, Instructional, and Documentary Films Treating Women's Roles, problems, and Communication Strategies.

ERIC Educational Resources Information Center

Edwards, Richard; Gronbeck, Bruce E.

This document lists 189 educational, instructional, and documentary films treating women's roles, problems, and communication strategies. The films are classified by substance and topics: beauty ethic: presentations and examinations; birth control, unwanted pregnancy, and abortion; coping with a male oriented society; dating and marriage;…

NOAA Weather Radio - Outage Reporting

Science.gov Websites

is not listed at Current Outages, the problem may be possibly be with your receiver. If your NWR receiver is not working properly or you need assistance in programming your NWR receiver, please click here information we may not be able to troubleshoot the problem fully. COVERAGE County Coverage Listings State

The Validity of Computer Audits of Simulated Cases Records.

ERIC Educational Resources Information Center

Rippey, Robert M.; And Others

This paper describes the implementation of a computer-based approach to scoring open-ended problem lists constructed to evaluate student and practitioner clinical judgment from real or simulated records. Based on 62 previously administered and scored problem lists, the program was written in BASIC for a Heathkit H11A computer (equivalent to DEC…

History of a Building Automation System.

ERIC Educational Resources Information Center

Martin, Anthony A.

1984-01-01

Having successfully used computer control in the solar-heated and cooled Terraset School, the Fairfax County, VA, Public Schools are now computerizing all their facilities. This article discusses the configuration and use of a countywide control system, reasons for the project's success, and problems of facility automation. (MCG)

Making Space: Automated Storage and Retrieval.

ERIC Educational Resources Information Center

Tanis, Norman; Ventuleth, Cindy

1987-01-01

Describes a pilot project in automated storage and retrieval of library materials which uses miniload cranes to retrieve bins of materials, and an interface with an online catalog that patrons use to request materials. Savings in space and money and potential problems with the system are discussed. (CLB)

Design of Inhouse Automated Library Systems.

ERIC Educational Resources Information Center

Cortez, Edwin M.

1984-01-01

Examines six steps inherent to development of in-house automated library system: (1) problem definition, (2) requirement specifications, (3) analysis of alternatives and solutions, (4, 5) design and implementation of hardware and software, and (6) evaluation. Practical method for comparing and weighting options is illustrated and explained. A…

Fundamental Problems of Lunar Research, Technical Solutions, and Priority Lunar Regions for Research

NASA Astrophysics Data System (ADS)

Ivanov, M. A.; Basilevsky, A. T.; Bricheva, S. S.; Guseva, E. N.; Demidov, N. E.; Zakharova, M.; Krasil'nikov, S. S.

2017-11-01

In this article, we discuss four fundamental scientific problems of lunar research: (1) lunar chronology, (2) the internal structure of the Moon, (3) the lunar polar regions, and (4) lunar volcanism. After formulating the scientific problems and their components, we proceed to outlining a list of technical solutions and priority lunar regions for research. Solving the listed problems requires investigations on the lunar surface using lunar rovers, which can deliver a set of analytical equipment to places where geological conditions are known from a detailed analysis of orbital information. The most critical research methods, which can answer some of the key questions, are analysis of local geological conditions from panoramic photographs, determination of the chemical, isotopic, and mineral composition of the soil, and deep seismic sounding. A preliminary list is given of lunar regions with high scientific priority.

Analysis of Complexity Evolution Management and Human Performance Issues in Commercial Aircraft Automation Systems

NASA Technical Reports Server (NTRS)

Vakil, Sanjay S.; Hansman, R. John

2000-01-01

Autoflight systems in the current generation of aircraft have been implicated in several recent incidents and accidents. A contributory aspect to these incidents may be the manner in which aircraft transition between differing behaviours or 'modes.' The current state of aircraft automation was investigated and the incremental development of the autoflight system was tracked through a set of aircraft to gain insight into how these systems developed. This process appears to have resulted in a system without a consistent global representation. In order to evaluate and examine autoflight systems, a 'Hybrid Automation Representation' (HAR) was developed. This representation was used to examine several specific problems known to exist in aircraft systems. Cyclomatic complexity is an analysis tool from computer science which counts the number of linearly independent paths through a program graph. This approach was extended to examine autoflight mode transitions modelled with the HAR. A survey was conducted of pilots to identify those autoflight mode transitions which airline pilots find difficult. The transitions identified in this survey were analyzed using cyclomatic complexity to gain insight into the apparent complexity of the autoflight system from the perspective of the pilot. Mode transitions which had been identified as complex by pilots were found to have a high cyclomatic complexity. Further examination was made into a set of specific problems identified in aircraft: the lack of a consistent representation of automation, concern regarding appropriate feedback from the automation, and the implications of physical limitations on the autoflight systems. Mode transitions involved in changing to and leveling at a new altitude were identified across multiple aircraft by numerous pilots. Where possible, evaluation and verification of the behaviour of these autoflight mode transitions was investigated via aircraft-specific high fidelity simulators. Three solution approaches to concerns regarding autoflight systems, and mode transitions in particular, are presented in this thesis. The first is to use training to modify pilot behaviours, or procedures to work around known problems. The second approach is to mitigate problems by enhancing feedback. The third approach is to modify the process by which automation is designed. The Operator Directed Process forces the consideration and creation of an automation model early in the design process for use as the basis of the software specification and training.

Automation of multi-agent control for complex dynamic systems in heterogeneous computational network

NASA Astrophysics Data System (ADS)

Oparin, Gennady; Feoktistov, Alexander; Bogdanova, Vera; Sidorov, Ivan

2017-01-01

The rapid progress of high-performance computing entails new challenges related to solving large scientific problems for various subject domains in a heterogeneous distributed computing environment (e.g., a network, Grid system, or Cloud infrastructure). The specialists in the field of parallel and distributed computing give the special attention to a scalability of applications for problem solving. An effective management of the scalable application in the heterogeneous distributed computing environment is still a non-trivial issue. Control systems that operate in networks, especially relate to this issue. We propose a new approach to the multi-agent management for the scalable applications in the heterogeneous computational network. The fundamentals of our approach are the integrated use of conceptual programming, simulation modeling, network monitoring, multi-agent management, and service-oriented programming. We developed a special framework for an automation of the problem solving. Advantages of the proposed approach are demonstrated on the parametric synthesis example of the static linear regulator for complex dynamic systems. Benefits of the scalable application for solving this problem include automation of the multi-agent control for the systems in a parallel mode with various degrees of its detailed elaboration.

WISE: Automated support for software project management and measurement. M.S. Thesis

NASA Technical Reports Server (NTRS)

Ramakrishnan, Sudhakar

1995-01-01

One important aspect of software development and IV&V is measurement. Unless a software development effort is measured in some way, it is difficult to judge the effectiveness of current efforts and predict future performances. Collection of metrics and adherence to a process are difficult tasks in a software project. Change activity is a powerful indicator of project status. Automated systems that can handle change requests, issues, and other process documents provide an excellent platform for tracking the status of the project. A World Wide Web based architecture is developed for (a) making metrics collection an implicit part of the software process, (b) providing metric analysis dynamically, (c) supporting automated tools that can complement current practices of in-process improvement, and (d) overcoming geographical barrier. An operational system (WISE) instantiates this architecture allowing for the improvement of software process in a realistic environment. The tool tracks issues in software development process, provides informal communication between the users with different roles, supports to-do lists (TDL), and helps in software process improvement. WISE minimizes the time devoted to metrics collection, analysis, and captures software change data. Automated tools like WISE focus on understanding and managing the software process. The goal is improvement through measurement.

Automated Help System For A Supercomputer

NASA Technical Reports Server (NTRS)

Callas, George P.; Schulbach, Catherine H.; Younkin, Michael

1994-01-01

Expert-system software developed to provide automated system of user-helping displays in supercomputer system at Ames Research Center Advanced Computer Facility. Users located at remote computer terminals connected to supercomputer and each other via gateway computers, local-area networks, telephone lines, and satellite links. Automated help system answers routine user inquiries about how to use services of computer system. Available 24 hours per day and reduces burden on human experts, freeing them to concentrate on helping users with complicated problems.

Automated scanning of plastic nuclear track detectors using the Minnesota star scanner

NASA Technical Reports Server (NTRS)

Fink, P. J.; Waddington, C. J.

1986-01-01

The problems found in an attempt to adapt an automated scanner of astronomical plates, the Minnesota Automated Dual Plate Scanner (APS), to locating and measuring the etch pits produced by ionizing particles in plastic nuclear track detectors (CR-39) are described. A visual study of these pits was made to determine the errors introduced in determining positions and shapes. Measurements made under a low power microscope were compared with those from the APS.

Problems of Automation and Management Principles Information Flow in Manufacturing

NASA Astrophysics Data System (ADS)

Grigoryuk, E. N.; Bulkin, V. V.

2017-07-01

Automated control systems of technological processes are complex systems that are characterized by the presence of elements of the overall focus, the systemic nature of the implemented algorithms for the exchange and processing of information, as well as a large number of functional subsystems. The article gives examples of automatic control systems and automated control systems of technological processes held parallel between them by identifying strengths and weaknesses. Other proposed non-standard control system of technological process.

AUTOBA: automation of backbone assignment from HN(C)N suite of experiments.

PubMed

Borkar, Aditi; Kumar, Dinesh; Hosur, Ramakrishna V

2011-07-01

Development of efficient strategies and automation represent important milestones of progress in rapid structure determination efforts in proteomics research. In this context, we present here an efficient algorithm named as AUTOBA (Automatic Backbone Assignment) designed to automate the assignment protocol based on HN(C)N suite of experiments. Depending upon the spectral dispersion, the user can record 2D or 3D versions of the experiments for assignment. The algorithm uses as inputs: (i) protein primary sequence and (ii) peak-lists from user defined HN(C)N suite of experiments. In the end, one gets H(N), (15)N, C(α) and C' assignments (in common BMRB format) for the individual residues along the polypeptide chain. The success of the algorithm has been demonstrated, not only with experimental spectra recorded on two small globular proteins: ubiquitin (76 aa) and M-crystallin (85 aa), but also with simulated spectra of 27 other proteins using assignment data from the BMRB.

Fast and Efficient Fragment-Based Lead Generation by Fully Automated Processing and Analysis of Ligand-Observed NMR Binding Data.

PubMed

Peng, Chen; Frommlet, Alexandra; Perez, Manuel; Cobas, Carlos; Blechschmidt, Anke; Dominguez, Santiago; Lingel, Andreas

2016-04-14

NMR binding assays are routinely applied in hit finding and validation during early stages of drug discovery, particularly for fragment-based lead generation. To this end, compound libraries are screened by ligand-observed NMR experiments such as STD, T1ρ, and CPMG to identify molecules interacting with a target. The analysis of a high number of complex spectra is performed largely manually and therefore represents a limiting step in hit generation campaigns. Here we report a novel integrated computational procedure that processes and analyzes ligand-observed proton and fluorine NMR binding data in a fully automated fashion. A performance evaluation comparing automated and manual analysis results on (19)F- and (1)H-detected data sets shows that the program delivers robust, high-confidence hit lists in a fraction of the time needed for manual analysis and greatly facilitates visual inspection of the associated NMR spectra. These features enable considerably higher throughput, the assessment of larger libraries, and shorter turn-around times.

Automating Relational Database Design for Microcomputer Users.

ERIC Educational Resources Information Center

Pu, Hao-Che

1991-01-01

Discusses issues involved in automating the relational database design process for microcomputer users and presents a prototype of a microcomputer-based system (RA, Relation Assistant) that is based on expert systems technology and helps avoid database maintenance problems. Relational database design is explained and the importance of easy input…

Library Automation: A "First Course" Teaching Syllabus.

ERIC Educational Resources Information Center

Dyson, Sam A.

This syllabus for a basic course in library automation is designed for advanced library students and practicing librarians. It is intended not to make librarians and students qualified programmers, but to give them enough background information for intelligent discussion of library problems with computer personnel. It may also stimulate the…

Automation and the Workplace. Selected Labor, Education, and Training Issues. A Technical Memorandum.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This technical memorandum discusses procedures for evaluating potential employment change associated with automation and outlines associated problems. It also describes the nature and modes of delivery of education, training, and retraining for persons holding or seeking employment in manufacturing industries. An introduction provides a brief…

AUTOMATION--SOME CLASSIFICATION AND MEASUREMENT PROBLEMS. REPRINT NO. 149.

ERIC Educational Resources Information Center

SULTAN, P.E.; PRASOW, P.

THE PURPOSE OF THIS PAPER WAS TO REVIEW HOW "AUTOMATION" IS DEFINED, GIVING CONSIDERATION TO CONVENTIONAL USAGE OF THE TERM AND TO THOSE CONSIDERATIONS WHICH DETERMINE THE CONVENIENCE OR SUITABILITY FOR RESEARCH PURPOSES OF PARTICULAR CATEGORIES OF TECHNICAL CHANGE. AN UNDERLYING ASSUMPTION IS THAT THE ADJUSTMENT DEMANDS IMPOSED BY TECHNOLOGY…

An Automated Circulation System for a Small Technical Library.

ERIC Educational Resources Information Center

Culnan, Mary J.

The traditional manually-controlled circulation records of the Burroughs Corporation Library in Goleta, California, presented problems of inaccuracies, time time-consuming searches, and lack of use statistics. An automated system with the capacity to do file maintenance and statistical record-keeping was implemented on a Burroughts B1700 computer.…

Automated mixed traffic transit vehicle microprocessor controller

NASA Technical Reports Server (NTRS)

Marks, R. A.; Cassell, P.; Johnston, A. R.

1981-01-01

An improved Automated Mixed Traffic Vehicle (AMTV) speed control system employing a microprocessor and transistor chopper motor current controller is described and its performance is presented in terms of velocity versus time curves. The on board computer hardware and software systems are described as is the software development system. All of the programming used in this controller was implemented using FORTRAN. This microprocessor controller made possible a number of safety features and improved the comfort associated with starting and shopping. In addition, most of the vehicle's performance characteristics can be altered by simple program parameter changes. A failure analysis of the microprocessor controller was generated and the results are included. Flow diagrams for the speed control algorithms and complete FORTRAN code listings are also included.

Computer control of a robotic satellite servicer

NASA Technical Reports Server (NTRS)

Fernandez, K. R.

1980-01-01

The advantages that will accrue from the in-orbit servicing of satellites are listed. It is noted that in a concept in satellite servicing which holds promise as a compromise between the high flexibility and adaptability of manned vehicles and the lower cost of an unmanned vehicle involves an unmanned servicer carrying a remotely supervised robotic manipulator arm. Because of deficiencies in sensor technology, robot servicing would require that satellites be designed according to a modular concept. A description is given of the servicer simulation hardware, the computer and interface hardware, and the software. It is noted that several areas require further development; these include automated docking, modularization of satellite design, reliable connector and latching mechanisms, development of manipulators for space environments, and development of automated diagnostic techniques.

A computer program for automated flutter solution and matched point determination

NASA Technical Reports Server (NTRS)

Bhatia, K. G.

1973-01-01

The use of a digital computer program (MATCH) for automated determination of the flutter velocity and the matched-point flutter density is described. The program is based on the use of the modified Laguerre iteration formula to converge to a flutter crossing or a matched-point density. A general description of the computer program is included and the purpose of all subroutines used is stated. The input required by the program and various input options are detailed, and the output description is presented. The program can solve flutter equations formulated with up to 12 vibration modes and obtain flutter solutions for up to 10 air densities. The program usage is illustrated by a sample run, and the FORTRAN program listing is included.

Automated design optimization of supersonic airplane wing structures under dynamic constraints

NASA Technical Reports Server (NTRS)

Fox, R. L.; Miura, H.; Rao, S. S.

1972-01-01

The problems of the preliminary and first level detail design of supersonic aircraft wings are stated as mathematical programs and solved using automated optimum design techniques. The problem is approached in two phases: the first is a simplified equivalent plate model in which the envelope, planform and structural parameters are varied to produce a design, the second is a finite element model with fixed configuration in which the material distribution is varied. Constraints include flutter, aeroelastically computed stresses and deflections, natural frequency and a variety of geometric limitations.

Automated measurement of retinal vascular tortuosity.

PubMed Central

Hart, W. E.; Goldbaum, M.; Côté, B.; Kube, P.; Nelson, M. R.

1997-01-01

Automatic measurement of blood vessel tortuosity is a useful capability for automatic ophthalmological diagnostic tools. We describe a suite of automated tortuosity measures for blood vessel segments extracted from RGB retinal images. The tortuosity measures were evaluated in two classification tasks: (1) classifying the tortuosity of blood vessel segments and (2) classifying the tortuosity of blood vessel networks. These tortuosity measures were able to achieve a classification rate of 91% for the first problem and 95% on the second problem, which confirms that they capture much of the ophthalmologists' notion of tortuosity. Images Figure 1 PMID:9357668

Crew/Automation Interaction in Space Transportation Systems: Lessons Learned from the Glass Cockpit

NASA Technical Reports Server (NTRS)

Rudisill, Marianne

2000-01-01

The progressive integration of automation technologies in commercial transport aircraft flight decks - the 'glass cockpit' - has had a major, and generally positive, impact on flight crew operations. Flight deck automation has provided significant benefits, such as economic efficiency, increased precision and safety, and enhanced functionality within the crew interface. These enhancements, however, may have been accrued at a price, such as complexity added to crew/automation interaction that has been implicated in a number of aircraft incidents and accidents. This report briefly describes 'glass cockpit' evolution. Some relevant aircraft accidents and incidents are described, followed by a more detailed description of human/automation issues and problems (e.g., crew error, monitoring, modes, command authority, crew coordination, workload, and training). This paper concludes with example principles and guidelines for considering 'glass cockpit' human/automation integration within space transportation systems.

The use of cognitive task analysis to reveal the instructional limitations of experts in the teaching of procedural skills.

PubMed

Sullivan, Maura E; Yates, Kenneth A; Inaba, Kenji; Lam, Lydia; Clark, Richard E

2014-05-01

Because of the automated nature of knowledge, experts tend to omit information when describing a task. A potential solution is cognitive task analysis (CTA). The authors investigated the percentage of knowledge experts omitted when teaching a cricothyrotomy to determine the percentage of additional knowledge gained during a CTA interview. Three experts were videotaped teaching a cricothyrotomy in 2010 at the University of Southern California. After transcription, they participated in CTA interviews for the same procedure. Three additional surgeons were recruited to perform a CTA for the procedure, and a "gold standard" task list was created. Transcriptions from the teaching sessions were compared with the task list to identify omitted steps (both "what" and "how" to do). Transcripts from the CTA interviews were compared against the task list to determine the percentage of knowledge articulated by each expert during the initial "free recall" (unprompted) phase of the CTA interview versus the amount of knowledge gained by using CTA elicitation techniques (prompted). Experts omitted an average of 71% (10/14) of clinical knowledge steps, 51% (14/27) of action steps, and 73% (3.6/5) of decision steps. For action steps, experts described "how to do it" only 13% (3.6/27) of the time. The average number of steps that were described increased from 44% (20/46) when unprompted to 66% (31/46) when prompted. This study supports previous research that experts unintentionally omit knowledge when describing a procedure. CTA is a useful method to extract automated knowledge and augment expert knowledge recall during teaching.

Automation of NMR structure determination of proteins.

PubMed

Altieri, Amanda S; Byrd, R Andrew

2004-10-01

The automation of protein structure determination using NMR is coming of age. The tedious processes of resonance assignment, followed by assignment of NOE (nuclear Overhauser enhancement) interactions (now intertwined with structure calculation), assembly of input files for structure calculation, intermediate analyses of incorrect assignments and bad input data, and finally structure validation are all being automated with sophisticated software tools. The robustness of the different approaches continues to deal with problems of completeness and uniqueness; nevertheless, the future is very bright for automation of NMR structure generation to approach the levels found in X-ray crystallography. Currently, near completely automated structure determination is possible for small proteins, and the prospect for medium-sized and large proteins is good. Copyright 2004 Elsevier Ltd.

Identification of potential surgical site infections leveraging an enterprise clinical information warehouse.

PubMed

Santangelo, Jennifer; Erdal, Selnur; Wellington, Linda; Mekhjian, Hagop; Kamal, Jyoti

2008-11-06

At The Ohio State University Medical Center (OSUMC), infection control practitioners (ICPs) need an accurate list of patients undergoing defined operative procedures to track surgical site infections. Using data from the OSUMC Information Warehouse (IW), we have created an automated report detailing required data. This report also displays associated surgical and pathology text or dictated reports providing additional information to the ICPs.

Evaluation of Management Systems Performance at Navy Regional Data Automation Centers.

DTIC Science & Technology

1984-03-01

REPORT NUMBER 7 . AUTHN~s) S. CONTRACT OR GRANT NUM@ER(@) Gloria Jean Cummings Scott 9. PERFORMING OROANIZATION NAME AND ADDRESS 10. PROGR3AM1 ELEMENT...120 BIBLIOGRAPHY . .. .. .. .. ... . . . . .. ... 124 I INITIAl DISTRIBUTION LIST ............... 125 7 p I,, 7 7 t I...invest- ment in information resources-- people , machines, and technologies. Unit costs of hardware continue to decline [Ref. 1]. Because computer needs

Associations of Physical and Psychologic Symptom Burden in Patients With Philadelphia Chromosome-Negative Myeloproliferative Neoplasms.

PubMed

McFarland, Daniel C; Shaffer, Kelly M; Polizzi, Heather; Mascarenhas, John; Kremyanskaya, Marina; Holland, Jimmie; Hoffman, Ronald

2018-01-31

The physical symptom burden of patients with myeloproliferative neoplasms (MPNs) may last for extended periods during their disease trajectories and lead to psychologic distress, anxiety, or depression or all of these. This study evaluated the relationship between physical symptom burden captured by the Physical Problem List (PPL) on the Distress Thermometer and Problem List and psychologic outcomes (distress, anxiety, and depression) in the MPN setting. Patients (N = 117) with MPNs completed questionnaires containing the Distress Thermometer and Problem List and the Hospital Anxiety and Depression Scale in a dedicated MPN clinic within an academic medical center. They reported symptoms from any of 22 physical problems on the PPL. Items endorsed by more than 10% of participants were assessed for their associations with distress (Distress Thermometer and Problem List), anxiety (Hospital Anxiety and Depression Scale-Anxiety), and depression (Hospital Anxiety and Depression Scale-Depression). The total number of endorsed PPL items per participant was also evaluated. Nine of 22 PPL items (fatigue, sleep, pain, dry skin/pruritus, memory/concentration, feeling swollen, breathing, and sexual) were reported by >10% of participants. In univariate analyses, all PPL items but one were associated with distress and depression, and all but 2 were associated with anxiety. In multivariate analyses, the total number of PPL items was associated with depression only (p < 0.001) when controlling for covariates. Physical symptom burden in MPN patients was clearly associated with psychologic symptoms. Depression was uniquely associated with overall physical symptom burden. As such, the endorsement of multiple PPL items on the Distress Thermometer and Problem List should prompt an evaluation for psychologic symptoms to improve MPN patients' overall morbidity and quality of life. Copyright © 2018 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

Two Different Approaches to Automated Mark Up of Emotions in Text

NASA Astrophysics Data System (ADS)

Francisco, Virginia; Hervás, Raqucl; Gervás, Pablo

This paper presents two different approaches to automated marking up of texts with emotional labels. For the first approach a corpus of example texts previously annotated by human evaluators is mined for an initial assignment of emotional features to words. This results in a List of Emotional Words (LEW) which becomes a useful resource for later automated mark up. The mark up algorithm in this first approach mirrors closely the steps taken during feature extraction, employing for the actual assignment of emotional features a combination of the LEW resource and WordNet for knowledge-based expansion of words not occurring in LEW. The algorithm for automated mark up is tested against new text samples to test its coverage. The second approach mark up texts during their generation. We have a knowledge base which contains the necessary information for marking up the text. This information is related to actions and characters. The algorithm in this case employ the information of the knowledge database and decides the correct emotion for every sentence. The algorithm for automated mark up is tested against four different texts. The results of the two approaches are compared and discussed with respect to three main issues: relative adequacy of each one of the representations used, correctness and coverage of the proposed algorithms, and additional techniques and solutions that may be employed to improve the results.

Grohar: Automated Visualization of Genome-Scale Metabolic Models and Their Pathways.

PubMed

Moškon, Miha; Zimic, Nikolaj; Mraz, Miha

2018-05-01

Genome-scale metabolic models (GEMs) have become a powerful tool for the investigation of the entire metabolism of the organism in silico. These models are, however, often extremely hard to reconstruct and also difficult to apply to the selected problem. Visualization of the GEM allows us to easier comprehend the model, to perform its graphical analysis, to find and correct the faulty relations, to identify the parts of the system with a designated function, etc. Even though several approaches for the automatic visualization of GEMs have been proposed, metabolic maps are still manually drawn or at least require large amount of manual curation. We present Grohar, a computational tool for automatic identification and visualization of GEM (sub)networks and their metabolic fluxes. These (sub)networks can be specified directly by listing the metabolites of interest or indirectly by providing reference metabolic pathways from different sources, such as KEGG, SBML, or Matlab file. These pathways are identified within the GEM using three different pathway alignment algorithms. Grohar also supports the visualization of the model adjustments (e.g., activation or inhibition of metabolic reactions) after perturbations are induced.

An automated method for the determination of deoxyribonuclease activity as exemplified by fractionation of the components of the medicament Varidase®

PubMed Central

Locke, I. C.; Ramsey, M. P.; Hill, S. S.; Carpenter, B. G.

1993-01-01

The activity of most deoxyribonuclease enzymes can be monitored by measuring the change in absorbance at 260 nm which accompanies the breakdown of the double-stranded structure of native DNA. An automated method for determining deoxyribonuclease activity, based on such an absorbance change, which can overcome problems of inhibition arising from the presence of inorganic cations, is described. Variations in inorganic cation concentration is a particular problem when measuring the activity of chromatographic fractions eluted via a salt gradient. A comparison is made between the automated and a manual method for the assay of deoxyribonuclease active constituents, of the medicament ‘Varidase’, eluted from a Cellex-D (Bio-Rad Laboratories Ltd) anionic exchange resin using a 0.05-1.0 M sodium chloride gradient. PMID:18924962

Fleet Sizing of Automated Material Handling Using Simulation Approach

NASA Astrophysics Data System (ADS)

Wibisono, Radinal; Ai, The Jin; Ratna Yuniartha, Deny

2018-03-01

Automated material handling tends to be chosen rather than using human power in material handling activity for production floor in manufacturing company. One critical issue in implementing automated material handling is designing phase to ensure that material handling activity more efficient in term of cost spending. Fleet sizing become one of the topic in designing phase. In this research, simulation approach is being used to solve fleet sizing problem in flow shop production to ensure optimum situation. Optimum situation in this research means minimum flow time and maximum capacity in production floor. Simulation approach is being used because flow shop can be modelled into queuing network and inter-arrival time is not following exponential distribution. Therefore, contribution of this research is solving fleet sizing problem with multi objectives in flow shop production using simulation approach with ARENA Software

Automated knowledge generation

NASA Technical Reports Server (NTRS)

Myler, Harley R.; Gonzalez, Avelino J.

1988-01-01

The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

Building Flexible User Interfaces for Solving PDEs

NASA Astrophysics Data System (ADS)

Logg, Anders; Wells, Garth N.

2010-09-01

FEniCS is a collection of software tools for the automated solution of differential equations by finite element methods. In this note, we describe how FEniCS can be used to solve a simple nonlinear model problem with varying levels of automation. At one extreme, FEniCS provides tools for the fully automated and adaptive solution of nonlinear partial differential equations. At the other extreme, FEniCS provides a range of tools that allow the computational scientist to experiment with novel solution algorithms.

Prompting in Web-Based Environments: Supporting Self-Monitoring and Problem Solving Skills in College Students

ERIC Educational Resources Information Center

Kauffman, Douglas F.; Ge, Xun; Xie, Kui; Chen, Ching-Huei

2008-01-01

This study explored Metacognition and how automated instructional support in the form of problem-solving and self-reflection prompts influenced students' capacity to solve complex problems in a Web-based learning environment. Specifically, we examined the independent and interactive effects of problem-solving prompts and reflection prompts on…

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

Verifying the Modal Logic Cube Is an Easy Task (For Higher-Order Automated Reasoners)

NASA Astrophysics Data System (ADS)

Benzmüller, Christoph

Prominent logics, including quantified multimodal logics, can be elegantly embedded in simple type theory (classical higher-order logic). Furthermore, off-the-shelf reasoning systems for simple type type theory exist that can be uniformly employed for reasoning within and about embedded logics. In this paper we focus on reasoning about modal logics and exploit our framework for the automated verification of inclusion and equivalence relations between them. Related work has applied first-order automated theorem provers for the task. Our solution achieves significant improvements, most notably, with respect to elegance and simplicity of the problem encodings as well as with respect to automation performance.

ADP Analysis project for the Human Resources Management Division

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1993-01-01

The ADP (Automated Data Processing) Analysis Project was conducted for the Human Resources Management Division (HRMD) of NASA's Langley Research Center. The three major areas of work in the project were computer support, automated inventory analysis, and an ADP study for the Division. The goal of the computer support work was to determine automation needs of Division personnel and help them solve computing problems. The goal of automated inventory analysis was to find a way to analyze installed software and usage on a Macintosh. Finally, the ADP functional systems study for the Division was designed to assess future HRMD needs concerning ADP organization and activities.

Administrative automation in a scientific environment

NASA Technical Reports Server (NTRS)

Jarrett, J. R.

1984-01-01

Although the scientific personnel at GSFC were advanced in the development and use of hardware and software for scientific applications, resistance to the use of automation or purchase of terminals, software and services, specifically for administrative functions was widespread. The approach used to address problems and constraints and plans for administrative automation within the Space and Earth Sciences Directorate are delineated. Accomplishments thus far include reduction of paperwork and manual efforts; improved communications through telemail and committees; additional support staff; increased awareness at all levels on ergonomic concerns and the need for training; better equipment; improved ADP skills through experience; management commitment; and an overall strategy for automating.

ClinicalTrials.gov as a data source for semi-automated point-of-care trial eligibility screening.

PubMed

Pfiffner, Pascal B; Oh, JiWon; Miller, Timothy A; Mandl, Kenneth D

2014-01-01

Implementing semi-automated processes to efficiently match patients to clinical trials at the point of care requires both detailed patient data and authoritative information about open studies. To evaluate the utility of the ClinicalTrials.gov registry as a data source for semi-automated trial eligibility screening. Eligibility criteria and metadata for 437 trials open for recruitment in four different clinical domains were identified in ClinicalTrials.gov. Trials were evaluated for up to date recruitment status and eligibility criteria were evaluated for obstacles to automated interpretation. Finally, phone or email outreach to coordinators at a subset of the trials was made to assess the accuracy of contact details and recruitment status. 24% (104 of 437) of trials declaring on open recruitment status list a study completion date in the past, indicating out of date records. Substantial barriers to automated eligibility interpretation in free form text are present in 81% to up to 94% of all trials. We were unable to contact coordinators at 31% (45 of 146) of the trials in the subset, either by phone or by email. Only 53% (74 of 146) would confirm that they were still recruiting patients. Because ClinicalTrials.gov has entries on most US and many international trials, the registry could be repurposed as a comprehensive trial matching data source. Semi-automated point of care recruitment would be facilitated by matching the registry's eligibility criteria against clinical data from electronic health records. But the current entries fall short. Ultimately, improved techniques in natural language processing will facilitate semi-automated complex matching. As immediate next steps, we recommend augmenting ClinicalTrials.gov data entry forms to capture key eligibility criteria in a simple, structured format.

Assessing Creative Problem-Solving with Automated Text Grading

ERIC Educational Resources Information Center

Wang, Hao-Chuan; Chang, Chun-Yen; Li, Tsai-Yen

2008-01-01

The work aims to improve the assessment of creative problem-solving in science education by employing language technologies and computational-statistical machine learning methods to grade students' natural language responses automatically. To evaluate constructs like creative problem-solving with validity, open-ended questions that elicit…

Information Graphic Classification, Decomposition and Alternative Representation

ERIC Educational Resources Information Center

Gao, Jinglun

2012-01-01

This thesis work is mainly focused on two problems related to improving accessibility of information graphics for visually impaired users. The first problem is automated analysis of information graphics for information extraction and the second problem is multi-modal representations for accessibility. Information graphics are graphical…

Application of modern control theory to scheduling and path-stretching maneuvers of aircraft in the near terminal area

NASA Technical Reports Server (NTRS)

Athans, M.

1974-01-01

A design concept of the dynamic control of aircraft in the near terminal area is discussed. An arbitrary set of nominal air routes, with possible multiple merging points, all leading to a single runway, is considered. The system allows for the automated determination of acceleration/deceleration of aircraft along the nominal air routes, as well as for the automated determination of path-stretching delay maneuvers. In addition to normal operating conditions, the system accommodates: (1) variable commanded separations over the outer marker to allow for takeoffs and between successive landings and (2) emergency conditions under which aircraft in distress have priority. The system design is based on a combination of three distinct optimal control problems involving a standard linear-quadratic problem, a parameter optimization problem, and a minimum-time rendezvous problem.

Intelligent resources for satellite ground control operations

NASA Technical Reports Server (NTRS)

Jones, Patricia M.

1994-01-01

This paper describes a cooperative approach to the design of intelligent automation and describes the Mission Operations Cooperative Assistant for NASA Goddard flight operations. The cooperative problem solving approach is being explored currently in the context of providing support for human operator teams and also in the definition of future advanced automation in ground control systems.

Using Software Tools to Automate the Assessment of Student Programs.

ERIC Educational Resources Information Center

Jackson, David

1991-01-01

Argues that advent of computer-aided instruction (CAI) systems for teaching introductory computer programing makes it imperative that software be developed to automate assessment and grading of student programs. Examples of typical student programing problems are given, and application of the Unix tools Lex and Yacc to the automatic assessment of…

Automated Management Of Documents

NASA Technical Reports Server (NTRS)

Boy, Guy

1995-01-01

Report presents main technical issues involved in computer-integrated documentation. Problems associated with automation of management and maintenance of documents analyzed from perspectives of artificial intelligence and human factors. Technologies that may prove useful in computer-integrated documentation reviewed: these include conventional approaches to indexing and retrieval of information, use of hypertext, and knowledge-based artificial-intelligence systems.

CACS: Master Textbook List Helps Solve On-Going Problem.

ERIC Educational Resources Information Center

Anderson, Robert

1979-01-01

The use of a master textbook list developed by the Southern California Association of College Stores (CACS) is described. The three-part program is explained and the information assimilation process, format for revising lists, procedures for implementation, and general guidelines are among areas covered. (PHR)

Automated Generation of Finite-Element Meshes for Aircraft Conceptual Design

NASA Technical Reports Server (NTRS)

Li, Wu; Robinson, Jay

2016-01-01

This paper presents a novel approach for automated generation of fully connected finite-element meshes for all internal structural components and skins of a given wing-body geometry model, controlled by a few conceptual-level structural layout parameters. Internal structural components include spars, ribs, frames, and bulkheads. Structural layout parameters include spar/rib locations in wing chordwise/spanwise direction and frame/bulkhead locations in longitudinal direction. A simple shell thickness optimization problem with two load conditions is used to verify versatility and robustness of the automated meshing process. The automation process is implemented in ModelCenter starting from an OpenVSP geometry and ending with a NASTRAN 200 solution. One subsonic configuration and one supersonic configuration are used for numerical verification. Two different structural layouts are constructed for each configuration and five finite-element meshes of different sizes are generated for each layout. The paper includes various comparisons of solutions of 20 thickness optimization problems, as well as discussions on how the optimal solutions are affected by the stress constraint bound and the initial guess of design variables.

Algorithm design for automated transportation photo enforcement camera image and video quality diagnostic check modules

NASA Astrophysics Data System (ADS)

Raghavan, Ajay; Saha, Bhaskar

2013-03-01

Photo enforcement devices for traffic rules such as red lights, toll, stops, and speed limits are increasingly being deployed in cities and counties around the world to ensure smooth traffic flow and public safety. These are typically unattended fielded systems, and so it is important to periodically check them for potential image/video quality problems that might interfere with their intended functionality. There is interest in automating such checks to reduce the operational overhead and human error involved in manually checking large camera device fleets. Examples of problems affecting such camera devices include exposure issues, focus drifts, obstructions, misalignment, download errors, and motion blur. Furthermore, in some cases, in addition to the sub-algorithms for individual problems, one also has to carefully design the overall algorithm and logic to check for and accurately classifying these individual problems. Some of these issues can occur in tandem or have the potential to be confused for each other by automated algorithms. Examples include camera misalignment that can cause some scene elements to go out of focus for wide-area scenes or download errors that can be misinterpreted as an obstruction. Therefore, the sequence in which the sub-algorithms are utilized is also important. This paper presents an overview of these problems along with no-reference and reduced reference image and video quality solutions to detect and classify such faults.

Cognitive engineering in aerospace application: Pilot interaction with cockpit automation

NASA Technical Reports Server (NTRS)

Sarter, Nadine R.; Woods, David D.

1993-01-01

Because of recent incidents involving glass-cockpit aircraft, there is growing concern with cockpit automation and its potential effects on pilot performance. However, little is known about the nature and causes of problems that arise in pilot-automation interaction. The results of two studies that provide converging, complementary data on pilots' difficulties with understanding and operating one of the core systems of cockpit automation, the Flight Management System (FMS) is reported. A survey asking pilots to describe specific incidents with the FMS and observations of pilots undergoing transition training to a glass cockpit aircraft served as vehicles to gather a corpus on the nature and variety of FMS-related problems. The results of both studies indicate that pilots become proficient in standard FMS operations through ground training and subsequent line experience. But even with considerable line experience, they still have difficulties tracking FMS status and behavior in certain flight contexts, and they show gaps in their understanding of the functional structure of the system. The results suggest that design-related factors such as opaque interfaces contribute to these difficulties which can affect pilots' situation awareness. The results of this research are relevant for both the design of cockpit automation and the development of training curricula specifically tailored to the needs of glass cockpits.

Application of Hybrid Real-Time Power System Simulator for Designing and Researching of Relay Protection and Automation

NASA Astrophysics Data System (ADS)

Borovikov, Yu S.; Sulaymanov, A. O.; Andreev, M. V.

2015-10-01

Development, research and operation of smart grids (SG) with active-adaptive networks (AAS) are actual tasks for today. Planned integration of high-speed FACTS devices greatly complicates complex dynamic properties of power systems. As a result the operating conditions of equipment of power systems are significantly changing. Such situation creates the new actual problem of development and research of relay protection and automation (RPA) which will be able to adequately operate in the SGs and adapt to its regimes. Effectiveness of solution of the problem depends on using tools - different simulators of electric power systems. Analysis of the most famous and widely exploited simulators led to the conclusion about the impossibility of using them for solution of the mentioned problem. In Tomsk Polytechnic University developed the prototype of hybrid multiprocessor software and hardware system - Hybrid Real-Time Power System Simulator (HRTSim). Because of its unique features this simulator can be used for solution of mentioned tasks. This article introduces the concept of development and research of relay protection and automation with usage of HRTSim.

Trouble Shooting Guide: Index to Problems and Solutions. Successful Schools: Guidebooks to Effective Educational Leadership. Volume 10.

ERIC Educational Resources Information Center

English, Fenwick W., Ed.

An index to the problems and solutions discussed in the the first 9 volumes of the 10-volume series, Successful Schools: Guidebooks to Effective Educational Leadership, is provided in this handbook. This "troubleshooting guide" lists topics in alphabetical order, describes the issue, and lists the corresponding volume and page number. (LMI)

FISH Finder: a high-throughput tool for analyzing FISH images

PubMed Central

Shirley, James W.; Ty, Sereyvathana; Takebayashi, Shin-ichiro; Liu, Xiuwen; Gilbert, David M.

2011-01-01

Motivation: Fluorescence in situ hybridization (FISH) is used to study the organization and the positioning of specific DNA sequences within the cell nucleus. Analyzing the data from FISH images is a tedious process that invokes an element of subjectivity. Automated FISH image analysis offers savings in time as well as gaining the benefit of objective data analysis. While several FISH image analysis software tools have been developed, they often use a threshold-based segmentation algorithm for nucleus segmentation. As fluorescence signal intensities can vary significantly from experiment to experiment, from cell to cell, and within a cell, threshold-based segmentation is inflexible and often insufficient for automatic image analysis, leading to additional manual segmentation and potential subjective bias. To overcome these problems, we developed a graphical software tool called FISH Finder to automatically analyze FISH images that vary significantly. By posing the nucleus segmentation as a classification problem, compound Bayesian classifier is employed so that contextual information is utilized, resulting in reliable classification and boundary extraction. This makes it possible to analyze FISH images efficiently and objectively without adjustment of input parameters. Additionally, FISH Finder was designed to analyze the distances between differentially stained FISH probes. Availability: FISH Finder is a standalone MATLAB application and platform independent software. The program is freely available from: http://code.google.com/p/fishfinder/downloads/list Contact: gilbert@bio.fsu.edu PMID:21310746

Automation of the longwall mining system

NASA Technical Reports Server (NTRS)

Zimmerman, W.; Aster, R. W.; Harris, J.; High, J.

1982-01-01

Cost effective, safe, and technologically sound applications of automation technology to underground coal mining were identified. The longwall analysis commenced with a general search for government and industry experience of mining automation technology. A brief industry survey was conducted to identify longwall operational, safety, and design problems. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state of the art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system.

Development of an automated fuzing station for the future armored resupply vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chesser, J.B.; Jansen, J.F.; Lloyd, P.D.

1995-03-01

The US Army is developing the Advanced Field Artillery System (SGSD), a next generation armored howitzer. The Future Armored Resupply Vehicle (FARV) will be its companion ammunition resupply vehicle. The FARV with automate the supply of ammunition and fuel to the AFAS which will increase capabilities over the current system. One of the functions being considered for automation is ammunition processing. Oak Ridge National Laboratory is developing equipment to demonstrate automated ammunition processing. One of the key operations to be automated is fuzing. The projectiles are initially unfuzed, and a fuze must be inserted and threaded into the projectile asmore » part of the processing. A constraint on the design solution is that the ammunition cannot be modified to simplify automation. The problem was analyzed to determine the alignment requirements. Using the results of the analysis, ORNL designed, built, and tested a test stand to verify the selected design solution.« less

A survey of automated methods for sensemaking support

NASA Astrophysics Data System (ADS)

Llinas, James

2014-05-01

Complex, dynamic problems in general present a challenge for the design of analysis support systems and tools largely because there is limited reliable a priori procedural knowledge descriptive of the dynamic processes in the environment. Problem domains that are non-cooperative or adversarial impute added difficulties involving suboptimal observational data and/or data containing the effects of deception or covertness. The fundamental nature of analysis in these environments is based on composite approaches involving mining or foraging over the evidence, discovery and learning processes, and the synthesis of fragmented hypotheses; together, these can be labeled as sensemaking procedures. This paper reviews and analyzes the features, benefits, and limitations of a variety of automated techniques that offer possible support to sensemaking processes in these problem domains.

A report on SHARP (Spacecraft Health Automated Reasoning Prototype) and the Voyager Neptune encounter

NASA Technical Reports Server (NTRS)

Martin, R. G. (Editor); Atkinson, D. J.; James, M. L.; Lawson, D. L.; Porta, H. J.

1990-01-01

The development and application of the Spacecraft Health Automated Reasoning Prototype (SHARP) for the operations of the telecommunications systems and link analysis functions in Voyager mission operations are presented. An overview is provided of the design and functional description of the SHARP system as it was applied to Voyager. Some of the current problems and motivations for automation in real-time mission operations are discussed, as are the specific solutions that SHARP provides. The application of SHARP to Voyager telecommunications had the goal of being a proof-of-capability demonstration of artificial intelligence as applied to the problem of real-time monitoring functions in planetary mission operations. AS part of achieving this central goal, the SHARP application effort was also required to address the issue of the design of an appropriate software system architecture for a ground-based, highly automated spacecraft monitoring system for mission operations, including methods for: (1) embedding a knowledge-based expert system for fault detection, isolation, and recovery within this architecture; (2) acquiring, managing, and fusing the multiple sources of information used by operations personnel; and (3) providing information-rich displays to human operators who need to exercise the capabilities of the automated system. In this regard, SHARP has provided an excellent example of how advanced artificial intelligence techniques can be smoothly integrated with a variety of conventionally programmed software modules, as well as guidance and solutions for many questions about automation in mission operations.

Implications of Whole-Brained Theories of Learning and Thinking for Computer-Based Instruction.

ERIC Educational Resources Information Center

Torrance, E. Paul

1981-01-01

Discusses the implications of theories of hemispheric dominance for computer-assisted instruction, highlights some of the computer's instructional uses, lists specialized functions of the cerebral hemispheres, and lists recommended solutions to CBI program problems which were submitted by gifted children. Thirty-five sources are listed. (FM)

Automated Rendezvous and Docking: 1994-2004

NASA Technical Reports Server (NTRS)

2004-01-01

This custom bibliography from the NASA Scientific and Technical Information Program lists a sampling of records found in the NASA Aeronautics and Space Database. The scope of this topic includes technologies for human exploration and robotic sample return missions. This area of focus is one of the enabling technologies as defined by NASA s Report of the President s Commission on Implementation of United States Space Exploration Policy, published in June 2004.

List of ARI Conference Papers, Journal Articles, Books, and Book Chapters: 1982-1991

DTIC Science & Technology

1992-10-01

and Engineering Applications of Artificial Intelligence and Expert Systems, Tullahoma, TN. Goehring, D.J., & Hart, R.J. (1985, October). Automated...systems: Computkr-based authoring. Proceedings of the 30th annual meeting of the Artificial Intelligence Society, Dayton, OH. Knapp, D.J., & Pliske, R.M...Moses, F.L. (1984-85) Intelligence vehicle integrated displays. Paper presented at the Conference on Applied Artificial Intelligence , the Data Processing

1986 Petroleum Software Directory. [800 mini, micro and mainframe computer software packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-01-01

Pennwell's 1986 Petroleum Software Directory is a complete listing of software created specifically for the petroleum industry. Details are provided on over 800 mini, micro and mainframe computer software packages from more than 250 different companies. An accountant can locate programs to automate bookkeeping functions in large oil and gas production firms. A pipeline engineer will find programs designed to calculate line flow and wellbore pressure drop.

Automated Estimation of the Orbital Parameters of Jupiter's Moons

NASA Astrophysics Data System (ADS)

Western, Emma; Ruch, Gerald T.

2016-01-01

Every semester the Physics Department at the University of St. Thomas has the Physics 104 class complete a Jupiter lab. This involves taking around twenty images of Jupiter and its moons with the telescope at the University of St. Thomas Observatory over the course of a few nights. The students then take each image and find the distance from each moon to Jupiter and plot the distances versus the elapsed time for the corresponding image. Students use the plot to fit four sinusoidal curves of the moons of Jupiter. I created a script that automates this process for the professor. It takes the list of images and creates a region file used by the students to measure the distance from the moons to Jupiter, a png image that is the graph of all the data points and the fitted curves of the four moons, and a csv file that contains the list of images, the date and time each image was taken, the elapsed time since the first image, and the distances to Jupiter for Io, Europa, Ganymede, and Callisto. This is important because it lets the professor spend more time working with the students and answering questions as opposed to spending time fitting the curves of the moons on the graph, which can be time consuming.

Artificial intelligence and design: Opportunities, research problems and directions

NASA Technical Reports Server (NTRS)

Amarel, Saul

1990-01-01

The issues of industrial productivity and economic competitiveness are of major significance in the U.S. at present. By advancing the science of design, and by creating a broad computer-based methodology for automating the design of artifacts and of industrial processes, we can attain dramatic improvements in productivity. It is our thesis that developments in computer science, especially in Artificial Intelligence (AI) and in related areas of advanced computing, provide us with a unique opportunity to push beyond the present level of computer aided automation technology and to attain substantial advances in the understanding and mechanization of design processes. To attain these goals, we need to build on top of the present state of AI, and to accelerate research and development in areas that are especially relevant to design problems of realistic complexity. We propose an approach to the special challenges in this area, which combines 'core work' in AI with the development of systems for handling significant design tasks. We discuss the general nature of design problems, the scientific issues involved in studying them with the help of AI approaches, and the methodological/technical issues that one must face in developing AI systems for handling advanced design tasks. Looking at basic work in AI from the perspective of design automation, we identify a number of research problems that need special attention. These include finding solution methods for handling multiple interacting goals, formation problems, problem decompositions, and redesign problems; choosing representations for design problems with emphasis on the concept of a design record; and developing approaches for the acquisition and structuring of domain knowledge with emphasis on finding useful approximations to domain theories. Progress in handling these research problems will have major impact both on our understanding of design processes and their automation, and also on several fundamental questions that are of intrinsic concern to AI. We present examples of current AI work on specific design tasks, and discuss new directions of research, both as extensions of current work and in the context of new design tasks where domain knowledge is either intractable or incomplete. The domains discussed include Digital Circuit Design, Mechanical Design of Rotational Transmissions, Design of Computer Architectures, Marine Design, Aircraft Design, and Design of Chemical Processes and Materials. Work in these domains is significant on technical grounds, and it is also important for economic and policy reasons.

Architectures and Evaluation for Adjustable Control Autonomy for Space-Based Life Support Systems

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra K.

2001-01-01

In the past five years, a number of automation applications for control of crew life support systems have been developed and evaluated in the Adjustable Autonomy Testbed at NASA's Johnson Space Center. This paper surveys progress on an adjustable autonomous control architecture for situations where software and human operators work together to manage anomalies and other system problems. When problems occur, the level of control autonomy can be adjusted, so that operators and software agents can work together on diagnosis and recovery. In 1997 adjustable autonomy software was developed to manage gas transfer and storage in a closed life support test. Four crewmembers lived and worked in a chamber for 91 days, with both air and water recycling. CO2 was converted to O2 by gas processing systems and wheat crops. With the automation software, significantly fewer hours were spent monitoring operations. System-level validation testing of the software by interactive hybrid simulation revealed problems both in software requirements and implementation. Since that time, we have been developing multi-agent approaches for automation software and human operators, to cooperatively control systems and manage problems. Each new capability has been tested and demonstrated in realistic dynamic anomaly scenarios, using the hybrid simulation tool.

Problem Solving Under Time-Constraints.

ERIC Educational Resources Information Center

Richardson, Michael; Hunt, Earl

A model of how automated and controlled processing can be mixed in computer simulations of problem solving is proposed. It is based on previous work by Hunt and Lansman (1983), who developed a model of problem solving that could reproduce the data obtained with several attention and performance paradigms, extending production-system notation to…

Automated information retrieval using CLIPS

NASA Technical Reports Server (NTRS)

Raines, Rodney Doyle, III; Beug, James Lewis

1991-01-01

Expert systems have considerable potential to assist computer users in managing the large volume of information available to them. One possible use of an expert system is to model the information retrieval interests of a human user and then make recommendations to the user as to articles of interest. At Cal Poly, a prototype expert system written in the C Language Integrated Production System (CLIPS) serves as an Automated Information Retrieval System (AIRS). AIRS monitors a user's reading preferences, develops a profile of the user, and then evaluates items returned from the information base. When prompted by the user, AIRS returns a list of items of interest to the user. In order to minimize the impact on system resources, AIRS is designed to run in the background during periods of light system use.

Space plasma research

NASA Technical Reports Server (NTRS)

Comfort, R. H.; Horwitz, J. L.

1986-01-01

Temperature and density analysis in the Automated Analysis Program (for the global empirical model) were modified to use flow velocities produced by the flow velocity analysis. Revisions were started to construct an interactive version of the technique for temperature and density analysis used in the automated analysis program. A sutdy of ion and electron heating at high altitudes in the outer plasmasphere was initiated. Also the analysis of the electron gun experiments on SCATHA were extended to include eclipse operations in order to test a hypothesis that there are interactions between the 50 to 100 eV beam and spacecraft generated photoelectrons. The MASSCOMP software to be used in taking and displaying data in the two-ion plasma experiment was tested and is now working satisfactorily. Papers published during the report period are listed.

Centralized automated cataloging of health science materials in the MLC/SUNY/OCLC shared cataloging service.

PubMed Central

Raper, J E

1977-01-01

Since February 1976, The Medical Library Center of New York, with the assistance of the SUNY/OCLC Network, has offered, on a subscription basis, a centralized automated cataloging service to health science libraries in the greater metropolitan New York area. By using workforms and prints of OCLC record (amended by the subscribing participants), technical services personnel at the center have fed cataloging data, via a CRT terminal, into the OCLC system, which provides (1) catalog cards, received in computer filing order; (2) book card, spine, and pocket labels; (3) accessions lists; and (4) data for eventual production of book catalogs and union catalogs. The experience of the center in the development, implementation, operation, and budgeting of its shared cataloging service is discussed. PMID:843650

Centralized automated cataloging of health science materials in the MLC/SUNY/OCLC shared cataloging service.

PubMed

Raper, J E

1977-04-01

Since February 1976, The Medical Library Center of New York, with the assistance of the SUNY/OCLC Network, has offered, on a subscription basis, a centralized automated cataloging service to health science libraries in the greater metropolitan New York area. By using workforms and prints of OCLC record (amended by the subscribing participants), technical services personnel at the center have fed cataloging data, via a CRT terminal, into the OCLC system, which provides (1) catalog cards, received in computer filing order; (2) book card, spine, and pocket labels; (3) accessions lists; and (4) data for eventual production of book catalogs and union catalogs. The experience of the center in the development, implementation, operation, and budgeting of its shared cataloging service is discussed.

Advanced space design program to the Universities Space Research Association and the National Aeronautics and Space Administration

NASA Technical Reports Server (NTRS)

Nevill, Gale E., Jr.

1988-01-01

The goal of the Fall 1987 class of EGM 4000 was the investigation of engineering aspects contributing to the development of NASA's Controlled Ecological Life Support System (CELSS). The areas investigated were the geometry of plant growth chambers, automated seeding of plants, remote sensing of plant health, and processing of grain into edible forms. The group investigating variable spacing of individual soybean plants designed growth trays consisting of three dimensional trapezoids arranged in a compact circular configuration. The automated seed manipulation and planting group investigated the electrical and mechanical properties of wheat seeds and developed three seeding concepts based upon these properties. The plant health and disease sensing group developed a list of reliable plant health indicators and investigated potential detection technologies.

The self-consistent calculation of pseudo-molecule energy levels, construction of energy level correlation diagrams and an automated computation system for SCF-X(Alpha)-SW calculations

NASA Technical Reports Server (NTRS)

Schlosser, H.

1981-01-01

The self consistent calculation of the electronic energy levels of noble gas pseudomolecules formed when a metal surface is bombarded by noble gas ions is discussed along with the construction of energy level correlation diagrams as a function of interatomic spacing. The self consistent field x alpha scattered wave (SCF-Xalpha-SW) method is utilized. Preliminary results on the Ne-Mg system are given. An interactive x alpha programming system, implemented on the LeRC IBM 370 computer, is described in detail. This automated system makes use of special PROCDEFS (procedure definitions) to minimize the data to be entered manually at a remote terminal. Listings of the special PROCDEFS and of typical input data are given.

Inventory management and reagent supply for automated chemistry.

PubMed

Kuzniar, E

1999-08-01

Developments in automated chemistry have kept pace with developments in HTS such that hundreds of thousands of new compounds can be rapidly synthesized in the belief that the greater the number and diversity of compounds that can be screened, the more successful HTS will be. The increasing use of automation for Multiple Parallel Synthesis (MPS) and the move to automated combinatorial library production is placing an overwhelming burden on the management of reagents. Although automation has improved the efficiency of the processes involved in compound synthesis, the bottleneck has shifted to ordering, collating and preparing reagents for automated chemistry resulting in loss of time, materials and momentum. Major efficiencies have already been made in the area of compound management for high throughput screening. Most of these efficiencies have been achieved with sophisticated library management systems using advanced engineering and data handling for the storage, tracking and retrieval of millions of compounds. The Automation Partnership has already provided many of the top pharmaceutical companies with modular automated storage, preparation and retrieval systems to manage compound libraries for high throughput screening. This article describes how these systems may be implemented to solve the specific problems of inventory management and reagent supply for automated chemistry.

Cold Agglutinin Disease; A Laboratory Challenge.

PubMed

Nikousefat, Zahra; Javdani, Moosa; Hashemnia, Mohammad; Haratyan, Abbas; Jalili, Ali

2015-10-01

Autoimmune haemolytic anemia (AIHA) is a complex process characterized by an immune reaction against red blood cell self-antigens. The analysis of specimens, drawn from patients with cold auto-immune hemolytic anemia is a difficult problem for automated hematology analyzer. This paper was written to alert technologists and pathologists to the presence of cold agglutinins and its effect on laboratory tests. A 72-year-old female presented to the Shafa laboratory for hematology profile evaluation. CBC indices showed invalid findings with the Sysmex automated hematology analyzer. Checking the laboratory process showed precipitation residue sticking to the sides of the tube. After warming the tubes, results become valid and the problem attributed to cold agglutinin disease. In this situation, aggregation of RBCs, which occurs at t < 30°C, causes invalid findings meanwhile working with automated hematology analyzer. Knowledge of this phenomenon can help prevent wasting too much time and make an early and accurate diagnosis.

Attrition after Intake at a University Counseling Center: Relationship among Client Race, Problem Type, and Time on a Waiting List

ERIC Educational Resources Information Center

Levy, Jacob J.; Thompson-Leonardelli, Kenya; Smith, Nathan Grant; Coleman, M. Nicole

2005-01-01

The present study examined the relationship between attrition after intake and the length of time that clients spent on a waiting list by client race and problem type. Participants were 1,461 clients who completed an initial intake evaluation at a large, Mid-Atlantic counseling center over a 6-year period. Fullfactorial hierarchical logistic…

Utilizing Facebook and Automated Telephone Calls to Increase Adoption of a Local Smoke Alarm Installation Program.

PubMed

Frattaroli, Shannon; Schulman, Eric; McDonald, Eileen M; Omaki, Elise C; Shields, Wendy C; Jones, Vanya; Brewer, William

2018-05-17

Innovative strategies are needed to improve the prevalence of working smoke alarms in homes. To our knowledge, this is the first study to report on the effectiveness of Facebook advertising and automated telephone calls as population-level strategies to encourage an injury prevention behavior. We examine the effectiveness of Facebook advertising and automated telephone calls as strategies to enroll individuals in Baltimore City's Fire Department's free smoke alarm installation program. We directed our advertising efforts toward Facebook users eligible for the Baltimore City Fire Department's free smoke alarm installation program and all homes with a residential phone line included in Baltimore City's automated call system. The Facebook campaign targeted Baltimore City residents 18 years of age and older. In total, an estimated 300 000 Facebook users met the eligibility criteria. Facebook advertisements were delivered to users' desktop and mobile device newsfeeds. A prerecorded message was sent to all residential landlines listed in the city's automated call system. By the end of the campaign, the 3 advertisements generated 456 666 impressions reaching 130 264 Facebook users. Of the users reached, 4367 individuals (1.3%) clicked the advertisement. The automated call system included approximately 90 000 residential phone numbers. Participants attributed 25 smoke alarm installation requests to Facebook and 458 to the automated call. Facebook advertisements are a novel approach to promoting smoke alarms and appear to be effective in exposing individuals to injury prevention messages. However, converting Facebook message recipients to users of a smoke alarm installation program occurred infrequently in this study. Residents who participated in the smoke alarm installation program were more likely to cite the automated call as the impetus for their participation. Additional research is needed to understand the circumstances and strategies to effectively use the social networking site as a tool to convert passive users into active participants.

JPLEX: Java Simplex Implementation with Branch-and-Bound Search for Automated Test Assembly

ERIC Educational Resources Information Center

Park, Ryoungsun; Kim, Jiseon; Dodd, Barbara G.; Chung, Hyewon

2011-01-01

JPLEX, short for Java simPLEX, is an automated test assembly (ATA) program. It is a mixed integer linear programming (MILP) solver written in Java. It reads in a configuration file, solves the minimization problem, and produces an output file for postprocessing. It implements the simplex algorithm to create a fully relaxed solution and…

ECMS--Educational Contest Management System for Selecting Elite Students

ERIC Educational Resources Information Center

Schneider, Thorsten

2004-01-01

Selecting elite students out of a huge collective is a difficult task. The main problem is to provide automated processes to reduce human work. ECMS (Educational Contest Management System) is an online tool approach to help--fully or partly automated--with the task of selecting such elite students out of a mass of candidates. International tests…

Automating "Word of Mouth" to Recommend Classes to Students: An Application of Social Information Filtering Algorithms

ERIC Educational Resources Information Center

Booker, Queen Esther

2009-01-01

An approach used to tackle the problem of helping online students find the classes they want and need is a filtering technique called "social information filtering," a general approach to personalized information filtering. Social information filtering essentially automates the process of "word-of-mouth" recommendations: items are recommended to a…

An Automated Individual Feedback and Marking System: An Empirical Study

ERIC Educational Resources Information Center

Barker, Trevor

2011-01-01

The recent National Students Survey showed that feedback to students was an ongoing problem in Higher Education. This paper reports on the extension of our past research into the provision of automated feedback for objective testing. In the research presented here, the system has been further developed for marking practical and essay questions and…

Motivational Properties of Support Staff Tasks in the Face of Automation.

ERIC Educational Resources Information Center

Garten, Edward D.

This paper maintains that staff needs which are both implicit and explicit within the automation-laden technical services work in a library setting most often do not receive adequate attention from the library's supervisory staff. It argues that analysis of problem areas within a given unit in the library can better promote positive strategies for…

A Multidisciplinary PBL Robot Control Project in Automation and Electronic Engineering

ERIC Educational Resources Information Center

Hassan, Houcine; Domínguez, Carlos; Martínez, Juan-Miguel; Perles, Angel; Capella, Juan-Vicente; Albaladejo, José

2015-01-01

This paper presents a multidisciplinary problem-based learning (PBL) project consisting of the development of a robot arm prototype and the implementation of its control system. The project is carried out as part of Industrial Informatics (II), a compulsory third-year course in the Automation and Electronic Engineering (AEE) degree program at the…

Robot graphic simulation testbed

NASA Technical Reports Server (NTRS)

Cook, George E.; Sztipanovits, Janos; Biegl, Csaba; Karsai, Gabor; Springfield, James F.

1991-01-01

The objective of this research was twofold. First, the basic capabilities of ROBOSIM (graphical simulation system) were improved and extended by taking advantage of advanced graphic workstation technology and artificial intelligence programming techniques. Second, the scope of the graphic simulation testbed was extended to include general problems of Space Station automation. Hardware support for 3-D graphics and high processing performance make high resolution solid modeling, collision detection, and simulation of structural dynamics computationally feasible. The Space Station is a complex system with many interacting subsystems. Design and testing of automation concepts demand modeling of the affected processes, their interactions, and that of the proposed control systems. The automation testbed was designed to facilitate studies in Space Station automation concepts.

Applying STOPP Guidelines in Primary Care Through Electronic Medical Record Decision Support: Randomized Control Trial Highlighting the Importance of Data Quality.

PubMed

Price, Morgan; Davies, Iryna; Rusk, Raymond; Lesperance, Mary; Weber, Jens

2017-06-15

Potentially Inappropriate Prescriptions (PIPs) are a common cause of morbidity, particularly in the elderly. We sought to understand how the Screening Tool of Older People's Prescriptions (STOPP) prescribing criteria, implemented in a routinely used primary care Electronic Medical Record (EMR), could impact PIP rates in community (non-academic) primary care practices. We conducted a mixed-method, pragmatic, cluster, randomized control trial in research naïve primary care practices. Phase 1: In the randomized controlled trial, 40 fully automated STOPP rules were implemented as EMR alerts during a 16-week intervention period. The control group did not receive the 40 STOPP rules (but received other alerts). Participants were recruited through the OSCAR EMR user group mailing list and in person at user group meetings. Results were assessed by querying EMR data PIPs. EMR data quality probes were included. Phase 2: physicians were invited to participate in 1-hour semi-structured interviews to discuss the results. In the EMR, 40 STOPP rules were successfully implemented. Phase 1: A total of 28 physicians from 8 practices were recruited (16 in intervention and 12 in control groups). The calculated PIP rate was 2.6% (138/5308) (control) and 4.11% (768/18,668) (intervention) at baseline. No change in PIPs was observed through the intervention (P=.80). Data quality probes generally showed low use of problem list and medication list. Phase 2: A total of 5 physicians participated. All the participants felt that they were aware of the alerts but commented on workflow and presentation challenges. The calculated PIP rate was markedly less than the expected rate found in literature (2.6% and 4.0% vs 20% in literature). Data quality probes highlighted issues related to completeness of data in areas of the EMR used for PIP reporting and by the decision support such as problem and medication lists. Users also highlighted areas for better integration of STOPP guidelines with prescribing workflows. Many of the STOPP criteria can be implemented in EMRs using simple logic. However, data quality in EMRs continues to be a challenge and was a limiting step in the effectiveness of the decision support in this study. This is important as decision makers continue to fund implementation and adoption of EMRs with the expectation of the use of advanced tools (such as decision support) without ongoing review of data quality and improvement. Clinicaltrials.gov NCT02130895; https://clinicaltrials.gov/ct2/show/NCT02130895 (Archived by WebCite at http://www.webcitation.org/6qyFigSYT). ©Morgan Price, Iryna Davies, Raymond Rusk, Mary Lesperance, Jens Weber. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 15.06.2017.

Compensation of Handicap and Autonomy Loss through e-Technologies and Home Automation for Elderly People in Rural Regions: An Actual Need for International Initiatives Networks

NASA Astrophysics Data System (ADS)

Billonnet, Laurent; Dumas, Jean-Michel; Desbordes, Emmanuel; Lapôtre, Bertrand

To face the problems of elderly and disabled people in a rural environment, the district of Guéret (department of Creuse, France) has set up the "Home automation and Health Pole". In association with the University of Limoges, this structure is based on the use of e-technologies together with home automation techniques. In this frame, many international collaborations attempts have started through a BSc diploma. This paper sums up these different collaborations and directions.

Use of information-retrieval languages in automated retrieval of experimental data from long-term storage

NASA Technical Reports Server (NTRS)

Khovanskiy, Y. D.; Kremneva, N. I.

1975-01-01

Problems and methods are discussed of automating information retrieval operations in a data bank used for long term storage and retrieval of data from scientific experiments. Existing information retrieval languages are analyzed along with those being developed. The results of studies discussing the application of the descriptive 'Kristall' language used in the 'ASIOR' automated information retrieval system are presented. The development and use of a specialized language of the classification-descriptive type, using universal decimal classification indices as the main descriptors, is described.

Open Source High Content Analysis Utilizing Automated Fluorescence Lifetime Imaging Microscopy.

PubMed

Görlitz, Frederik; Kelly, Douglas J; Warren, Sean C; Alibhai, Dominic; West, Lucien; Kumar, Sunil; Alexandrov, Yuriy; Munro, Ian; Garcia, Edwin; McGinty, James; Talbot, Clifford; Serwa, Remigiusz A; Thinon, Emmanuelle; da Paola, Vincenzo; Murray, Edward J; Stuhmeier, Frank; Neil, Mark A A; Tate, Edward W; Dunsby, Christopher; French, Paul M W

2017-01-18

We present an open source high content analysis instrument utilizing automated fluorescence lifetime imaging (FLIM) for assaying protein interactions using Förster resonance energy transfer (FRET) based readouts of fixed or live cells in multiwell plates. This provides a means to screen for cell signaling processes read out using intramolecular FRET biosensors or intermolecular FRET of protein interactions such as oligomerization or heterodimerization, which can be used to identify binding partners. We describe here the functionality of this automated multiwell plate FLIM instrumentation and present exemplar data from our studies of HIV Gag protein oligomerization and a time course of a FRET biosensor in live cells. A detailed description of the practical implementation is then provided with reference to a list of hardware components and a description of the open source data acquisition software written in µManager. The application of FLIMfit, an open source MATLAB-based client for the OMERO platform, to analyze arrays of multiwell plate FLIM data is also presented. The protocols for imaging fixed and live cells are outlined and a demonstration of an automated multiwell plate FLIM experiment using cells expressing fluorescent protein-based FRET constructs is presented. This is complemented by a walk-through of the data analysis for this specific FLIM FRET data set.

Open Source High Content Analysis Utilizing Automated Fluorescence Lifetime Imaging Microscopy

PubMed Central

Warren, Sean C.; Alibhai, Dominic; West, Lucien; Kumar, Sunil; Alexandrov, Yuriy; Munro, Ian; Garcia, Edwin; McGinty, James; Talbot, Clifford; Serwa, Remigiusz A.; Thinon, Emmanuelle; da Paola, Vincenzo; Murray, Edward J.; Stuhmeier, Frank; Neil, Mark A. A.; Tate, Edward W.; Dunsby, Christopher; French, Paul M. W.

2017-01-01

We present an open source high content analysis instrument utilizing automated fluorescence lifetime imaging (FLIM) for assaying protein interactions using Förster resonance energy transfer (FRET) based readouts of fixed or live cells in multiwell plates. This provides a means to screen for cell signaling processes read out using intramolecular FRET biosensors or intermolecular FRET of protein interactions such as oligomerization or heterodimerization, which can be used to identify binding partners. We describe here the functionality of this automated multiwell plate FLIM instrumentation and present exemplar data from our studies of HIV Gag protein oligomerization and a time course of a FRET biosensor in live cells. A detailed description of the practical implementation is then provided with reference to a list of hardware components and a description of the open source data acquisition software written in µManager. The application of FLIMfit, an open source MATLAB-based client for the OMERO platform, to analyze arrays of multiwell plate FLIM data is also presented. The protocols for imaging fixed and live cells are outlined and a demonstration of an automated multiwell plate FLIM experiment using cells expressing fluorescent protein-based FRET constructs is presented. This is complemented by a walk-through of the data analysis for this specific FLIM FRET data set. PMID:28190060

Assessment of commercial NLP engines for medication information extraction from dictated clinical notes.

PubMed

Jagannathan, V; Mullett, Charles J; Arbogast, James G; Halbritter, Kevin A; Yellapragada, Deepthi; Regulapati, Sushmitha; Bandaru, Pavani

2009-04-01

We assessed the current state of commercial natural language processing (NLP) engines for their ability to extract medication information from textual clinical documents. Two thousand de-identified discharge summaries and family practice notes were submitted to four commercial NLP engines with the request to extract all medication information. The four sets of returned results were combined to create a comparison standard which was validated against a manual, physician-derived gold standard created from a subset of 100 reports. Once validated, the individual vendor results for medication names, strengths, route, and frequency were compared against this automated standard with precision, recall, and F measures calculated. Compared with the manual, physician-derived gold standard, the automated standard was successful at accurately capturing medication names (F measure=93.2%), but performed less well with strength (85.3%) and route (80.3%), and relatively poorly with dosing frequency (48.3%). Moderate variability was seen in the strengths of the four vendors. The vendors performed better with the structured discharge summaries than with the clinic notes in an analysis comparing the two document types. Although automated extraction may serve as the foundation for a manual review process, it is not ready to automate medication lists without human intervention.

Combining Symbolic Computation and Theorem Proving: Some Problems of Ramanujan

DTIC Science & Technology

1994-01-01

1994 CMU-CS--94- 103 ¶ DTIC MAY 0e o99 c -rnepe Combining symbolic computation and theorem proving: some problems of Ramanujan Edmund Clarke Xudong Zhao...Research and Development Center, Aeronautical Systems Division (AFSC), U.S. Air Force, Wright-Patterson AFB, Ohio 45433-6543 under Contract F33615-90- C ...Availability Codes n n = f Avail and Ior7. k= f(k) = _L k~of(nk Dist Special 8. =I f (k + c ) =_k=,+ I f (k) A .[ 3. List of problems The list of challenge

A Method for Automated Detection of Usability Problems from Client User Interface Events

PubMed Central

Saadawi, Gilan M.; Legowski, Elizabeth; Medvedeva, Olga; Chavan, Girish; Crowley, Rebecca S.

2005-01-01

Think-aloud usability analysis provides extremely useful data but is very time-consuming and expensive to perform because of the extensive manual video analysis that is required. We describe a simple method for automated detection of usability problems from client user interface events for a developing medical intelligent tutoring system. The method incorporates (1) an agent-based method for communication that funnels all interface events and system responses to a centralized database, (2) a simple schema for representing interface events and higher order subgoals, and (3) an algorithm that reproduces the criteria used for manual coding of usability problems. A correction factor was empirically determining to account for the slower task performance of users when thinking aloud. We tested the validity of the method by simultaneously identifying usability problems using TAU and manually computing them from stored interface event data using the proposed algorithm. All usability problems that did not rely on verbal utterances were detectable with the proposed method. PMID:16779121

Decision-making and problem-solving methods in automation technology

NASA Technical Reports Server (NTRS)

Hankins, W. W.; Pennington, J. E.; Barker, L. K.

1983-01-01

The state of the art in the automation of decision making and problem solving is reviewed. The information upon which the report is based was derived from literature searches, visits to university and government laboratories performing basic research in the area, and a 1980 Langley Research Center sponsored conferences on the subject. It is the contention of the authors that the technology in this area is being generated by research primarily in the three disciplines of Artificial Intelligence, Control Theory, and Operations Research. Under the assumption that the state of the art in decision making and problem solving is reflected in the problems being solved, specific problems and methods of their solution are often discussed to elucidate particular aspects of the subject. Synopses of the following major topic areas comprise most of the report: (1) detection and recognition; (2) planning; and scheduling; (3) learning; (4) theorem proving; (5) distributed systems; (6) knowledge bases; (7) search; (8) heuristics; and (9) evolutionary programming.

The use of a multidimensional space for fusion candidate representation in a maritime domain awareness application

NASA Astrophysics Data System (ADS)

Lefebvre, Eric; Helleur, Christopher; Kashyap, Nathan

2008-03-01

Maritime surveillance of coastal regions requires operational staff to integrate a large amount of information from a variety of military and civilian sources. The diverse nature of the information sources makes complete automation difficult. The volume of vessels tracked and the number of sources makes it difficult for the limited operation centre staff to fuse all the information manually within a reasonable timeframe. In this paper, a conceptual decision space is proposed to provide a framework for automating the process of operators integrating the sources needed to maintain Maritime Domain Awareness. The decision space contains all potential pairs of ship tracks that are candidates for fusion. The location of the candidate pairs in this defined space depends on the value of the parameters used to make a decision. In the application presented, three independent parameters are used: the source detection efficiency, the geo-feasibility, and the track quality. One of three decisions is applied to each candidate track pair based on these three parameters: 1. to accept the fusion, in which case tracks are fused in one track, 2. to reject the fusion, in which case the candidate track pair is removed from the list of potential fusion, and 3. to defer the fusion, in which case no fusion occurs but the candidate track pair remains in the list of potential fusion until sufficient information is provided. This paper demonstrates in an operational setting how a proposed conceptual space is used to optimize the different thresholds for automatic fusion decision while minimizing the list of unresolved cases when the decision is left to the operator.

Software design for automated assembly of truss structures

NASA Technical Reports Server (NTRS)

Herstrom, Catherine L.; Grantham, Carolyn; Allen, Cheryl L.; Doggett, William R.; Will, Ralph W.

1992-01-01

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

The automation of remote vehicle control. [in Mars roving vehicles

NASA Technical Reports Server (NTRS)

Paine, G.

1977-01-01

The automation of remote vehicles is becoming necessary to overcome the requirement of having man present as a controller. By removing man, remote vehicles can be operated in areas where the environment is too hostile for man, his reaction times are too slow, time delays are too long, and where his presence is too costly, or where system performance can be improved. This paper addresses the development of automated remote vehicle control for nonspace and space tasks from warehouse vehicles to proposed Mars rovers. The state-of-the-art and the availability of new technology for implementing automated control are reviewed and the major problem areas are outlined. The control strategies are divided into those where the path is planned in advance or constrained, or where the system is a teleoperator, or where automation or robotics have been introduced.

On the adaptive function of children's and adults' false memories.

PubMed

Howe, Mark L; Wilkinson, Samantha; Garner, Sarah R; Ball, Linden J

2016-09-01

Recent research has shown that memory illusions can successfully prime both children's and adults' performance on complex, insight-based problems (compound remote associates tasks or CRATs). The current research aimed to clarify the locus of these priming effects. Like before, Deese-Roediger-McDermott (DRM) lists were selected to prime subsequent CRATs such that the critical lures were also the solution words to a subset of the CRATs participants attempted to solve. Unique to the present research, recognition memory tests were used and participants were either primed during the list study phase, during the memory test phase, or both. Across two experiments, primed problems were solved more frequently and significantly faster than unprimed problems. Moreover, when participants were primed during the list study phase, subsequent solution times and rates were considerably superior to those produced by those participants who were simply primed at test. Together, these are the first results to show that false-memory priming during encoding facilitates problem-solving in both children and adults.

A component-based problem list subsystem for the HOLON testbed. Health Object Library Online.

PubMed Central

Law, V.; Goldberg, H. S.; Jones, P.; Safran, C.

1998-01-01

One of the deliverables of the HOLON (Health Object Library Online) project is the specification of a reference architecture for clinical information systems that facilitates the development of a variety of discrete, reusable software components. One of the challenges facing the HOLON consortium is determining what kinds of components can be made available in a library for developers of clinical information systems. To further explore the use of component architectures in the development of reusable clinical subsystems, we have incorporated ongoing work in the development of enterprise terminology services into a Problem List subsystem for the HOLON testbed. We have successfully implemented a set of components using CORBA (Common Object Request Broker Architecture) and Java distributed object technologies that provide a functional problem list application and UMLS-based "Problem Picker." Through this development, we have overcome a variety of obstacles characteristic of rapidly emerging technologies, and have identified architectural issues necessary to scale these components for use and reuse within an enterprise clinical information system. PMID:9929252

Development of a Tool to Identify Problems Related to Medication Adherence in Home Healthcare Patients.

PubMed

Mahan, Kathryn R; Clark, Jeffrey A; Anderson, Kurt D; Koller, Nolan J; Gates, Brian J

2017-05-01

In the home healthcare setting, clinicians are required to evaluate patient's medication therapy, including adherence. To facilitate this conversation, a pilot question list to help uncover potential medication nonadherence was created after completing a review of the literature and ascertaining the common themes as to why patients were nonadherent to their medication therapies. Pharmacy personnel who provide onsite consultations in a home healthcare setting used the question list to identify medication-related problems that could contribute to nonadherence and to document potential solutions. Through pharmacist-patient interactions, which occurred after admission to the home healthcare agency, pharmacy personnel found on average 2.3 issues per patient, which could affect medication adherence. Side effects were the most common problem identified. After this tool was tested with 65 patient interviews, the questions were analyzed and condensed into a shorter list more specific to the identification of medication-related problems for use by home care clinicians.

On the adaptive function of children's and adults’ false memories

PubMed Central

Howe, Mark L.; Wilkinson, Samantha; Garner, Sarah R.; Ball, Linden J.

2016-01-01

ABSTRACT Recent research has shown that memory illusions can successfully prime both children's and adults' performance on complex, insight-based problems (compound remote associates tasks or CRATs). The current research aimed to clarify the locus of these priming effects. Like before, Deese–Roediger–McDermott (DRM) lists were selected to prime subsequent CRATs such that the critical lures were also the solution words to a subset of the CRATs participants attempted to solve. Unique to the present research, recognition memory tests were used and participants were either primed during the list study phase, during the memory test phase, or both. Across two experiments, primed problems were solved more frequently and significantly faster than unprimed problems. Moreover, when participants were primed during the list study phase, subsequent solution times and rates were considerably superior to those produced by those participants who were simply primed at test. Together, these are the first results to show that false-memory priming during encoding facilitates problem-solving in both children and adults. PMID:26230151

A component-based problem list subsystem for the HOLON testbed. Health Object Library Online.

PubMed

Law, V; Goldberg, H S; Jones, P; Safran, C

1998-01-01

One of the deliverables of the HOLON (Health Object Library Online) project is the specification of a reference architecture for clinical information systems that facilitates the development of a variety of discrete, reusable software components. One of the challenges facing the HOLON consortium is determining what kinds of components can be made available in a library for developers of clinical information systems. To further explore the use of component architectures in the development of reusable clinical subsystems, we have incorporated ongoing work in the development of enterprise terminology services into a Problem List subsystem for the HOLON testbed. We have successfully implemented a set of components using CORBA (Common Object Request Broker Architecture) and Java distributed object technologies that provide a functional problem list application and UMLS-based "Problem Picker." Through this development, we have overcome a variety of obstacles characteristic of rapidly emerging technologies, and have identified architectural issues necessary to scale these components for use and reuse within an enterprise clinical information system.

How to report and monitor the performance of waiting list management.

PubMed

Torkki, Markus; Linna, Miika; Seitsalo, Seppo; Paavolainen, Pekka

2002-01-01

Potential problems concerning waiting list management are often monitored using mean waiting times based on empirical samples. However, the appropriateness of mean waiting time as an indicator of access can be questioned if a waiting list is not managed well, e.g., if the queue discipline is violated. This study was performed to find out about the queue discipline in waiting lists for elective surgery to reveal potential discrepancies in waiting list management. There were 1,774 waiting list patients for hallux valgus or varicose vein surgery or sterilization. The waiting time distributions of patients receiving surgery and of patients still waiting for an operation are presented in column charts. The charts are compared with two model charts. One model chart presents a high queue discipline (first in-first out) and another a poor queue discipline (random) queue. There were significant differences in waiting list management across hospitals and patient categories. Examples of a poor queue discipline were found in queues for hallux valgus and varicose vein operations. A routine waiting list reporting should be used to guarantee the quality of waiting list management and to pinpoint potential problems in access. It is important to monitor not only the number of patients in the waiting list but also the queue discipline and the balance between demand and supply of surgical services. The purpose for this type of reporting is to ensure that the priority setting made at health policy level also works in practise.

An Automated Solution of the Low-Thrust Interplanetary Trajectory Problem.

PubMed

Englander, Jacob A; Conway, Bruce A

2017-01-01

Preliminary design of low-thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys, the bodies at which those flybys are performed, and in some cases the final destination. In addition, a time-history of control variables must be chosen that defines the trajectory. There are often many thousands, if not millions, of possible trajectories to be evaluated, which can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the mission design problem as a hybrid optimal control problem. The method is demonstrated on hypothetical missions to Mercury, the main asteroid belt, and Pluto.

An Automated Solution of the Low-Thrust Interplanetary Trajectory Problem

NASA Technical Reports Server (NTRS)

Englander, Jacob A.; Conway, Bruce

2016-01-01

Preliminary design of low-thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys, the bodies at which those flybys are performed, and in some cases the final destination. In addition, a time-history of control variables must be chosen that defines the trajectory. There are often many thousands, if not millions, of possible trajectories to be evaluated, which can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the mission design problem as a hybrid optimal control problem. The method is demonstrated on hypothetical missions to Mercury, the main asteroid belt, and Pluto.

An Automated Solution of the Low-Thrust Interplanetary Trajectory Problem

PubMed Central

Englander, Jacob A.; Conway, Bruce A.

2017-01-01

Preliminary design of low-thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys, the bodies at which those flybys are performed, and in some cases the final destination. In addition, a time-history of control variables must be chosen that defines the trajectory. There are often many thousands, if not millions, of possible trajectories to be evaluated, which can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the mission design problem as a hybrid optimal control problem. The method is demonstrated on hypothetical missions to Mercury, the main asteroid belt, and Pluto. PMID:29515289

Numerical methods for the unsymmetric tridiagonal eigenvalue problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jessup, E.R.

1996-12-31

This report summarizes the results of our project {open_quotes}Numerical Methods for the Unsymmetric Tridiagonal Eigenvalue Problem{close_quotes}. It was funded by both by a DOE grant (No. DE-FG02-92ER25122, 6/1/92-5/31/94, $100,000) and by an NSF Research Initiation Award (No. CCR-9109785, 7/1/91-6/30/93, $46,564.) The publications resulting from that project during the DOE funding period are listed below. Two other journal papers and two other conference papers were produced during the NSF funding period. Most of the listed conference papers are early or partial versions of the listed journal papers.

Automated Car Park Management System

NASA Astrophysics Data System (ADS)

Fabros, J. P.; Tabañag, D.; Espra, A.; Gerasta, O. J.

2015-06-01

This study aims to develop a prototype for an Automated Car Park Management System that will increase the quality of service of parking lots through the integration of a smart system that assists motorist in finding vacant parking lot. The research was based on implementing an operating system and a monitoring system for parking system without the use of manpower. This will include Parking Guidance and Information System concept which will efficiently assist motorists and ensures the safety of the vehicles and the valuables inside the vehicle. For monitoring, Optical Character Recognition was employed to monitor and put into list all the cars entering the parking area. All parking events in this system are visible via MATLAB GUI which contain time-in, time-out, time consumed information and also the lot number where the car parks. To put into reality, this system has a payment method, and it comes via a coin slot operation to control the exit gate. The Automated Car Park Management System was successfully built by utilizing microcontrollers specifically one PIC18f4550 and two PIC16F84s and one PIC16F628A.

Matching nuts and bolts in O(n log n) time

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komlos, J.; Ma, Yuan; Szemeredi, E.

Given a set of n nuts of distinct widths and a set of n bolts such that each nut corresponds to a unique bolt of the same width, how should we match every nut with its corresponding bolt by comparing nuts with bolts (no comparison is allowed between two nuts or between two bolts)? The problem can be naturally viewed as a variant of the classic sorting problem as follows. Given two lists of n numbers each such that one list is a permutation of the other, how should we sort the lists by comparisons only between numbers in differentmore » lists? We give an O(n log n)-time deterministic algorithm for the problem. This is optimal up to a constant factor and answers an open question posed by Alon, Blum, Fiat, Kannan, Naor, and Ostrovsky. Moreover, when copies of nuts and bolts are allowed, our algorithm runs in optimal O(log n) time on n processors in Valiant`s parallel comparison tree model. Our algorithm is based on the AKS sorting algorithm with substantial modifications.« less

Software Manages Documentation in a Large Test Facility

NASA Technical Reports Server (NTRS)

Gurneck, Joseph M.

2001-01-01

The 3MCS computer program assists and instrumentation engineer in performing the 3 essential functions of design, documentation, and configuration management of measurement and control systems in a large test facility. Services provided by 3MCS are acceptance of input from multiple engineers and technicians working at multiple locations;standardization of drawings;automated cross-referencing; identification of errors;listing of components and resources; downloading of test settings; and provision of information to customers.

Description of research interests and current work related to automating software design

NASA Technical Reports Server (NTRS)

Kaindl, Hermann

1992-01-01

Enclosed is a list of selected and recent publications. Most of these publications concern applied research in the areas of software engineering and human-computer interaction. It is felt that domain-specific knowledge plays a major role in software development. Additionally, it is believed that improvements in the general software development process (e.g., object-oriented approaches) will have to be combined with the use of large domain-specific knowledge bases.

Department of Defense Costing References Web. Phase 1. Establishing the Foundation.

DTIC Science & Technology

1997-03-01

a functional economic analysis under one set of constraints and having to repeat the entire process for the MAISRC. Recommendations for automated...MAISRC s acquisition oversight process . The cost and cycle time for each iteration can be in the order of $300,000 and 6 months, respectively...Institute resources were expected to become available at the conclusion of another BPR project. The contents list for the first Business Process

Integration Evaluation of the Advanced Mission Extender Device Max

DTIC Science & Technology

2014-04-04

Figure 9. Pressure on collecting tube due to restraint harness design in left pilot seat of CH-47. The rating scores for comfort and functionality in...collecting tube due to restraint harness design in left pilot seat of CH-47. .......... 16  v Table of contents (continued) List of...USAF in 2009. The upgrades to the AMXDmax® included more automation, improvements to battery life, male cup comfort and collection bag design , plus a

Automated Problem Generation in Learning Management Systems: A Tutorial

ERIC Educational Resources Information Center

Romero, Jaime; Rozano, Mercedes

2016-01-01

The benefits of solving problems have been widely acknowledged by literature. Its implementation in e-learning platforms can make easier its management and the learning process itself. However, its implementation can also become a very time-consuming task, particularly when the number of problems to generate is high. In this tutorial we describe a…

Adaptive algorithm of selecting optimal variant of errors detection system for digital means of automation facility of oil and gas complex

NASA Astrophysics Data System (ADS)

Poluyan, A. Y.; Fugarov, D. D.; Purchina, O. A.; Nesterchuk, V. V.; Smirnova, O. V.; Petrenkova, S. B.

2018-05-01

To date, the problems associated with the detection of errors in digital equipment (DE) systems for the automation of explosive objects of the oil and gas complex are extremely actual. Especially this problem is actual for facilities where a violation of the accuracy of the DE will inevitably lead to man-made disasters and essential material damage, at such facilities, the diagnostics of the accuracy of the DE operation is one of the main elements of the industrial safety management system. In the work, the solution of the problem of selecting the optimal variant of the errors detection system of errors detection by a validation criterion. Known methods for solving these problems have an exponential valuation of labor intensity. Thus, with a view to reduce time for solving the problem, a validation criterion is compiled as an adaptive bionic algorithm. Bionic algorithms (BA) have proven effective in solving optimization problems. The advantages of bionic search include adaptability, learning ability, parallelism, the ability to build hybrid systems based on combining. [1].

Development of an Information Model for Kidney Transplant Wait List.

PubMed

Bircan, Hüseyin Yüce; Özçelik, Ümit; Uysal, Nida; Demirağ, Alp; Haberal, Mehmet

2015-11-01

Deceased-donor kidney transplant is unique among surgical procedures that are an urgent procedure performed in an elective population. It has not been possible to accurately determine when a given patient will be called for transplant. Patients on the active transplant list can be called for a transplant at any time. As a result, every effort must be made to optimize their health according to best practices and published clinical practice guidelines. Once the patient is placed on the transplant wait list after undergoing an initial extensive evaluation, continued surveillance is required. Therefore, we developed a kidney transplant wait list surveillance software program that alerts organ transplant coordinator on time regarding which patients need a work-up. The new designed software has a database of our waiting patients with their completed and pending controls. The software also has built-in functions to warn the responsible staff with an E-mail. If one of the controls of a recipient delayed, the software sends an automated E-mail to the staff regarding the patients delayed controls. The software is a Web application that works on any platform with a Web browser and Internet connection and allows access by multiple users. The software has been developed with NET platform. The database is SQL server. The software has the following functions: patient communication info, search, alert list, alert E-mail, control entry, and system management. As of January 2014, a total of 21 000 patients were registered on the National Kidney Transplant wait list in Turkey and the kidney transplant wait list had been expanding by 2000 to 3000 patients each year. Therefore computerized wait list programs are crucial to help to transplant centers to keep their patients up-to-date on time.

Dynamic Architecture Computer

DTIC Science & Technology

1988-12-01

Figures ................................... v List of Tables ................................... vi I. Introduction ..................... 1 Background... 1 Problem ................................ 3 Scope .................................. 4 Approach...Collected Data on Variables ...... 136 Appendix D: Collected Data on Operations...............208 iv List of Figures Figure Page 2- 1 Keyword Search

The Proposal of a Evolutionary Strategy Generating the Data Structures Based on a Horizontal Tree for the Tests

NASA Astrophysics Data System (ADS)

Żukowicz, Marek; Markiewicz, Michał

2016-09-01

The aim of the article is to present a mathematical definition of the object model, that is known in computer science as TreeList and to show application of this model for design evolutionary algorithm, that purpose is to generate structures based on this object. The first chapter introduces the reader to the problem of presenting data using the TreeList object. The second chapter describes the problem of testing data structures based on TreeList. The third one shows a mathematical model of the object TreeList and the parameters, used in determining the utility of structures created through this model and in evolutionary strategy, that generates these structures for testing purposes. The last chapter provides a brief summary and plans for future research related to the algorithm presented in the article.

Regional environmental analysis and management: New techniques for current problems

NASA Technical Reports Server (NTRS)

Honea, R. B.; Paludan, C. T. N.

1974-01-01

Advances in data acquisition and processing procedures for regional environmental analysis are discussed. Automated and semi-automated techniques employing Earth Resources Technology Satellite data and conventional data sources are presented. Experiences are summarized. The ERTS computer compatible tapes provide a very complete and flexible record of earth resources data and represent a viable medium to enhance regional environmental analysis research.

Methodology Investigation of AI(Artificial Intelligence) Test Officer Support Tool. Volume 1

DTIC Science & Technology

1989-03-01

American Association for Artificial inteligence A! ............. Artificial inteliigence AMC ............ Unt:ed States Army Maeriel Comand ASL...block number) FIELD GROUP SUB-GROUP Artificial Intelligence, Expert Systems Automated Aids to Testing 9. ABSTRACT (Continue on reverse if necessary and...identify by block number) This report covers the application of Artificial Intelligence-Techniques to the problem of creating automated tools to

The Automated System of the Rhythm Analysis of the Educational Process in a Higher Educational Institution on the Basis of Aprioristic Data

ERIC Educational Resources Information Center

Pelin, Nicolae; Mironov, Vladimir

2008-01-01

In this article the problems of functioning algorithms development for system of the automated analysis of educational process rhythm in a higher educational institution are considered. Using the device of experiment planning for conducting the scientific researches, adapted methodologies, received by authors in the dissertational works at the…

Stanford Conference on Collaborative Library Systems Development. Proceedings of a Conference Held at Stanford University Libraries, October 4-5, 1968.

ERIC Educational Resources Information Center

Veaner, Allen B., Ed.; Fasana, Paul J., Ed.

The conference was convened (1) to disseminate information on the development of Stanford's library automation project, and (2) to disseminate information on the several and joint library automation activities of Chicago, Columbia, and Stanford, and (3) to promote heated discussion and active exchange of ideas and problems between librarians,…

Investigating the Human Computer Interaction Problems with Automated Teller Machine Navigation Menus

ERIC Educational Resources Information Center

Curran, Kevin; King, David

2008-01-01

Purpose: The automated teller machine (ATM) has become an integral part of our society. However, using the ATM can often be a frustrating experience as people frequently reinsert cards to conduct multiple transactions. This has led to the research question of whether ATM menus are designed in an optimal manner. This paper aims to address the…

Expert System for Automated Design Synthesis

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Barthelemy, Jean-Francois M.

1987-01-01

Expert-system computer program EXADS developed to aid users of Automated Design Synthesis (ADS) general-purpose optimization program. EXADS aids engineer in determining best combination based on knowledge of specific problem and expert knowledge stored in knowledge base. Available in two interactive machine versions. IBM PC version (LAR-13687) written in IQ-LISP. DEC VAX version (LAR-13688) written in Franz-LISP.

Development of autonomous vehicles’ testing system

NASA Astrophysics Data System (ADS)

Ivanov, A. M.; Shadrin, S. S.

2018-02-01

This article describes overview of automated and, in perspective, autonomous vehicles’ (AV) implementation risks. Set of activities, actual before the use of AVs on public roads, minimizing negative technical and social problems of AVs’ implementation is presented. Classification of vehicle’s automated control systems operating conditions is formulated. Groups of tests for AVs are developed and justified, sequence of AVs’ testing system formation is proposed.

Crew aiding and automation: A system concept for terminal area operations, and guidelines for automation design

NASA Technical Reports Server (NTRS)

Dwyer, John P.

1994-01-01

This research and development program comprised two efforts: the development of guidelines for the design of automated systems, with particular emphasis on automation design that takes advantage of contextual information, and the concept-level design of a crew aiding system, the Terminal Area Navigation Decision Aiding Mediator (TANDAM). This concept outlines a system capable of organizing navigation and communication information and assisting the crew in executing the operations required in descent and approach. In service of this endeavor, problem definition activities were conducted that identified terminal area navigation and operational familiarization exercises addressing the terminal area navigation problem. Both airborne and ground-based (ATC) elements of aircraft control were extensively researched. The TANDAM system concept was then specified, and the crew interface and associated systems described. Additionally, three descent and approach scenarios were devised in order to illustrate the principal functions of the TANDAM system concept in relation to the crew, the aircraft, and ATC. A plan for the evaluation of the TANDAM system was established. The guidelines were developed based on reviews of relevant literature, and on experience gained in the design effort.

Automated control of hierarchical systems using value-driven methods

NASA Technical Reports Server (NTRS)

Pugh, George E.; Burke, Thomas E.

1990-01-01

An introduction is given to the Value-driven methodology, which has been successfully applied to solve a variety of difficult decision, control, and optimization problems. Many real-world decision processes (e.g., those encountered in scheduling, allocation, and command and control) involve a hierarchy of complex planning considerations. For such problems it is virtually impossible to define a fixed set of rules that will operate satisfactorily over the full range of probable contingencies. Decision Science Applications' value-driven methodology offers a systematic way of automating the intuitive, common-sense approach used by human planners. The inherent responsiveness of value-driven systems to user-controlled priorities makes them particularly suitable for semi-automated applications in which the user must remain in command of the systems operation. Three examples of the practical application of the approach in the automation of hierarchical decision processes are discussed: the TAC Brawler air-to-air combat simulation is a four-level computerized hierarchy; the autonomous underwater vehicle mission planning system is a three-level control system; and the Space Station Freedom electrical power control and scheduling system is designed as a two-level hierarchy. The methodology is compared with rule-based systems and with other more widely-known optimization techniques.

A Framework for Modeling Human-Machine Interactions

NASA Technical Reports Server (NTRS)

Shafto, Michael G.; Rosekind, Mark R. (Technical Monitor)

1996-01-01

Modern automated flight-control systems employ a variety of different behaviors, or modes, for managing the flight. While developments in cockpit automation have resulted in workload reduction and economical advantages, they have also given rise to an ill-defined class of human-machine problems, sometimes referred to as 'automation surprises'. Our interest in applying formal methods for describing human-computer interaction stems from our ongoing research on cockpit automation. In this area of aeronautical human factors, there is much concern about how flight crews interact with automated flight-control systems, so that the likelihood of making errors, in particular mode-errors, is minimized and the consequences of such errors are contained. The goal of the ongoing research on formal methods in this context is: (1) to develop a framework for describing human interaction with control systems; (2) to formally categorize such automation surprises; and (3) to develop tests for identification of these categories early in the specification phase of a new human-machine system.

Automated identification of cone photoreceptors in adaptive optics retinal images.

PubMed

Li, Kaccie Y; Roorda, Austin

2007-05-01

In making noninvasive measurements of the human cone mosaic, the task of labeling each individual cone is unavoidable. Manual labeling is a time-consuming process, setting the motivation for the development of an automated method. An automated algorithm for labeling cones in adaptive optics (AO) retinal images is implemented and tested on real data. The optical fiber properties of cones aided the design of the algorithm. Out of 2153 manually labeled cones from six different images, the automated method correctly identified 94.1% of them. The agreement between the automated and the manual labeling methods varied from 92.7% to 96.2% across the six images. Results between the two methods disagreed for 1.2% to 9.1% of the cones. Voronoi analysis of large montages of AO retinal images confirmed the general hexagonal-packing structure of retinal cones as well as the general cone density variability across portions of the retina. The consistency of our measurements demonstrates the reliability and practicality of having an automated solution to this problem.

A robotic system for automation of logistics functions on the Space Station

NASA Technical Reports Server (NTRS)

Martin, J. C.; Purves, R. B.; Hosier, R. N.; Krein, B. A.

1988-01-01

Spacecraft inventory management is currently performed by the crew and as systems become more complex, increased crew time will be required to perform routine logistics activities. If future spacecraft are to function effectively as research labs and production facilities, the efficient use of crew time as a limited resource for performing mission functions must be employed. The use of automation and robotics technology, such as automated warehouse and materials handling functions, can free the crew from many logistics tasks and provide more efficient use of crew time. Design criteria for a Space Station Automated Logistics Inventory Management System is focused on through the design and demonstration of a mobile two armed terrestrial robot. The system functionally represents a 0 gravity automated inventory management system and the problems associated with operating in such an environment. Features of the system include automated storage and retrieval, item recognition, two armed robotic manipulation, and software control of all inventory item transitions and queries.

From Here to Autonomy.

PubMed

Endsley, Mica R

2017-02-01

As autonomous and semiautonomous systems are developed for automotive, aviation, cyber, robotics and other applications, the ability of human operators to effectively oversee and interact with them when needed poses a significant challenge. An automation conundrum exists in which as more autonomy is added to a system, and its reliability and robustness increase, the lower the situation awareness of human operators and the less likely that they will be able to take over manual control when needed. The human-autonomy systems oversight model integrates several decades of relevant autonomy research on operator situation awareness, out-of-the-loop performance problems, monitoring, and trust, which are all major challenges underlying the automation conundrum. Key design interventions for improving human performance in interacting with autonomous systems are integrated in the model, including human-automation interface features and central automation interaction paradigms comprising levels of automation, adaptive automation, and granularity of control approaches. Recommendations for the design of human-autonomy interfaces are presented and directions for future research discussed.

Laser-optical methods and systems of computer-automated investigation of bio-objects (plants, seeds, food products, and others)

NASA Astrophysics Data System (ADS)

Lisker, Joseph S.

1999-01-01

A new conception of the scientific problem of information exchange in the system plant-man-environment is developed. The laser-optical methods and the system are described which allow computer automated investigation of bio-objects without damaging their vital function. The results of investigation of optical-physiological features of plants and seeds are presented. The effects of chlorophyll well and IR beg are discovered for plants and also the effects os water pumping and protein transformations are shown for seeds. The perspectives of the use of the optical methods and equipment suggested to solve scientific problems of agriculture are discussed.

The use of optimization techniques to design controlled diffusion compressor blading

NASA Technical Reports Server (NTRS)

Sanger, N. L.

1982-01-01

A method for automating compressor blade design using numerical optimization, and applied to the design of a controlled diffusion stator blade row is presented. A general purpose optimization procedure is employed, based on conjugate directions for locally unconstrained problems and on feasible directions for locally constrained problems. Coupled to the optimizer is an analysis package consisting of three analysis programs which calculate blade geometry, inviscid flow, and blade surface boundary layers. The optimizing concepts and selection of design objective and constraints are described. The procedure for automating the design of a two dimensional blade section is discussed, and design results are presented.

First Steps in Ecology: A Guide for the Elementary Grades.

ERIC Educational Resources Information Center

Bense, Beverly; And Others

Each of the 18 units in this collection addresses a different environmental problem. An introduction precedes the collection of activities and appendices provide lists of forest animals and plants and lists of food webs. A glossary is provided as is a bibliography. Each unit includes: (1) a list of objectives; (2) a summary; (3) a discussion of…

A Selected List of Urban, Environmental and Social Problem Gaming/Simulations. Revised Edition.

ERIC Educational Resources Information Center

Steinwachs, Barbara

This revised list includes games/simulations for all age levels, though often most applicable at the secondary through adult levels. In her reviews of available products, the author limited her listings to those games/simulations which are useful for educational purposes and which focus directly on social concerns relative to urban and…

Successful Manipulation in Stable Marriage Model with Complete Preference Lists

NASA Astrophysics Data System (ADS)

Kobayashi, Hirotatsu; Matsui, Tomomi

This paper deals with a strategic issue in the stable marriage model with complete preference lists (i.e., a preference list of an agent is a permutation of all the members of the opposite sex). Given complete preference lists of n men over n women, and a marriage µ, we consider the problem for finding preference lists of n women over n men such that the men-proposing deferred acceptance algorithm (Gale-Shapley algorithm) adopted to the lists produces µ. We show a simple necessary and sufficient condition for the existence of a set of preference lists of women over men. Our condition directly gives an O(n2) time algorithm for finding a set of preference lists, if it exists.