AIRS Observations of DomeC in Antarctica and Comparison with Automated Weather Stations (AWS)

NASA Technical Reports Server (NTRS)

Aumann, Hartmut H.; Gregorich, Dave; Broberg, Steve

2006-01-01

We compare the surface temperatures at Dome Concordia (DomeC) deduced from AIRS data and two Automatic Weather Stations at Concordia Station: AWS8989 , which has been in operation since December 1996, and AWS.it, for which data are available between January and November 2005. The AWS8989 readings are on average 3 K warmer than the AWS.it readings, with a warmer bias in the Antarctic summer than in the winter season. Although AIRS measures the skin brightness temperature, while the AWS reports the temperature of the air at 3 meter above the surface, the AIRS measurements agree well with the AWS.it readings for all data and separately for the summer and winter seasons, if data taken in the presence of strong surface inversions are filtered out. This can be done by deducing the vertical temperature gradient above the surface directly from the AIRS temperature sounding channels or indirectly by noting that extreme vertical gradients near the surface are unlikely if the wind speed is more than a few meters per second. Since the AIRS measurements are very well calibrated, the agreement with AWS.it is very encouraging. The warmer readings of AWS8989 are likely due to thermal contamination of the AWS8989 site by the increasing activity at Concordia Station. Data from an AWS.it quality station could be used for the evaluation of radiometric accuracy and stability of polar orbiting sounders at low temperatures. Unfortunately, data from AWS.it was available only for a limited time. The thermal contamination of the AWS8989 data makes long-term trends deduced from AWS8989 and possibly results about the rapid Antarctic warming deduced from other research stations on Antarctica suspect. AIRS is the first hyperspectral infrared sounder designed in support of weather forecasting and climate research. It was launched in May 2002 on the EOS Aqua spacecraft into a 704 km altitude polar sun-synchronous orbit. The lifetime of AIRS, estimated before launch to be at least 5 years is, based on the latest evaluation, limited by the amount of attitude control gas on the EOS Aqua spacecraft, which is expected to last through 2015.

Role of home automation in distribution automation and automated meter reading. Tropical report, December 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, K.W.

1994-12-01

This is one of a series of topical reports dealing with the strategic, technical, and market development of home automation. Particular emphasis is placed upon identifying those aspects of home automation that will impact the gas industry and gas products. Communication standards, market drivers, key organizations, technical implementation, product opportunities, and market growth projects will all be addressed in this or subsequent reports. These reports will also discuss how the gas industry and gas-fired equipment can use home automation technology to benefit the consumer.

Estimating pumping time and ground-water withdrawals using energy- consumption data

USGS Publications Warehouse

Hurr, R.T.; Litke, D.W.

1989-01-01

Evaluation of the hydrology of an aquifer requires knowledge about the volume of groundwater in storage and also about the volume of groundwater withdrawals. Totalizer flow meters may be installed at pumping plants to measure withdrawals; however, it generally is impractical to equip all pumping plants in an area with meters. A viable alternative is the use of rate-time methods. Rate-time methods may be used at individual pumping plants to decrease the data collection necessary for determining withdrawals. At sites where pumping-time measurement devices are not installed, pumping time may be determined on the basis of energy consumption and power demand. At pumping plants where energy consumption is metered, data acquired by reading of meters is used to estimate pumping time. Care needs to be taken to read these meters correctly. At pumping plants powered by electricity, the calculations need to be modified if transformers are present. At pumping plants powered by natural gas, the effects of the pressure-correction factor need to be included in the calculations. At pumping plants powered by gasoline, diesel oil, or liquid petroleum gas, the geometry of storage tanks needs to be analyzed as part of the calculations. The relation between power demand and pumping rate at a pumping plant can be described through the use of the power-consumption coefficient. Where equipment and hydrologic conditions are stable, this coefficient can be applied to total energy consumption at a site to estimate total groundwater withdrawals. Random sampling of power consumption coefficients can be used to estimate area-wide groundwater withdrawal. (USGS)

A device for automatically measuring and supervising the critical care patient's urine output.

PubMed

Otero, Abraham; Palacios, Francisco; Akinfiev, Teodor; Fernández, Roemi

2010-01-01

Critical care units are equipped with commercial monitoring devices capable of sensing patients' physiological parameters and supervising the achievement of the established therapeutic goals. This avoids human errors in this task and considerably decreases the workload of the healthcare staff. However, at present there still is a very relevant physiological parameter that is measured and supervised manually by the critical care units' healthcare staff: urine output. This paper presents a patent-pending device capable of automatically recording and supervising the urine output of a critical care patient. A high precision scale is used to measure the weight of a commercial urine meter. On the scale's pan there is a support frame made up of Bosch profiles that isolates the scale from force transmission from the patient's bed, and guarantees that the urine flows properly through the urine meter input tube. The scale's readings are sent to a PC via Bluetooth where an application supervises the achievement of the therapeutic goals. The device is currently undergoing tests at a research unit associated with the University Hospital of Getafe in Spain.

The Big E (Energy). 4-H Member Guide, Unit 2.

ERIC Educational Resources Information Center

Caldwell, William; And Others

This activity and record book is designed for unit 2 (ages 12-14) of the Nebraska 4-H Energy Project. Aims, energy attitudes to be developed, and instructions are provided for each activity. Activities include: (1) a word search of energy-related words (with definitions provided); (2) determining fuel waste; (3) reading electric/gas meters and…

Design of Remote Heat-Meter System Based on Trusted Technology

NASA Astrophysics Data System (ADS)

Yu, Changgeng; Lai, Liping

2018-03-01

This article presents a proposal of a heat meter and remote meter reading system for the disadvantages of the hackers very easily using eavesdropping, tampering, replay attack of traditional remote meter reading system. The system selects trusted technology such as, the identity authentication, integrity verifying, and data protection. By the experiments, it is proved that the remote meter reading system of the heat meter can be used to verify the feasibility of the technology, and verify the practicability and operability of data protection technology.

Research on application of modern household design and intellective household system

NASA Astrophysics Data System (ADS)

Zhang, Kaisheng; Zeng, Yuan; Fan, Junli

2009-07-01

People spend most of their lives indoors. To build a comfortable human environment, is always a dream for humankind. From ancient to now, the development of architecture imprints the progress of human civilization. However, for today's architecture, steel and concrete are only the surface. Intelligent technology will create its spirit and offer the soul. Nowadays, there's new meaning for the connotation of household design. This paper mainly discusses Design of Home Intelligent Electronic Assistant System Based on Embedded Module of S3C2410. Conerning the aspects of Home Security System, Automatic Meter Reading System, Automatic Control System for Electrical appliances, and Data Intelligence Communication System, it compactly describes the system's constitution diagram and hardware module, thus making better use of Home Intelligent Electronic Assistant System Based on Embedded Module.

Effect of altitude on spirometric parameters and the performance of peak flow meters.

PubMed Central

Pollard, A. J.; Mason, N. P.; Barry, P. W.; Pollard, R. C.; Collier, D. J.; Fraser, R. S.; Miller, M. R.; Milledge, J. S.

1996-01-01

BACKGROUND: Portable peak flow meters are used in clinical practice for measurement of peak expiratory flow (PEF) at many different altitudes throughout the world. Some PEF meters are affected by gas density. This study was undertaken to establish which type of meter is best for use above sea level and to determine changes in spirometric measurements at altitude. METHODS: The variable orifice mini-Wright peak flow meter was compared with the fixed orifice Micro Medical Microplus turbine microspirometer at sea level and at Everest Base Camp (5300 m). Fifty one members of the 1994 British Mount Everest Medical Expedition were studied (age range, 19-55). RESULTS: Mean forced vital capacity (FVC) fell by 5% and PEF rose by 25.5%. However, PEF recorded with the mini-Wright peak flow meter underestimated PEF by 31%, giving readings 6.6% below sea level values. FVC was lowest in the mornings and did not improve significantly with acclimatisation. Lower PEF values were observed on morning readings and were associated with higher acute mountain sickness scores, although the latter may reflect decreased effort in those with acute mountain sickness. There was no change in forced expiratory volume in one second (FEV1) at altitude when measured with the turbine microspirometer. CONCLUSIONS: The cause of the fall in FVC at 5300 m is unknown but may be attributed to changes in lung blood volume, interstitial lung oedema, or early airways closure. Variable orifice peak flow meters grossly underestimate PEF at altitude and fixed orifice devices are therefore preferable where accurate PEF measurements are required above sea level. PMID:8711651

Justification of the Utility of Introducing Smart Meters in Latvia

NASA Astrophysics Data System (ADS)

Kunickis, M.; Dandens, A.; Bariss, U.

2015-12-01

Automatic data reading from smart meters is being developed in many parts of the world, including Latvia. The key drivers for that are developments of smart technologies and economic benefits for consumers. Deployment of smart meters could be launched in a massive scale. Several pilot projects were implemented to verify the feasibility of smart meters for individual consumer groups. Preliminary calculations indicate that installation of smart meters for approximately 23 % of electricity consumers would be economically viable. Currently, the data for the last two years is available for an in-depth mathematical analysis. The continuous analysis of consumption data would be established, when more measurements from smart meters are available. The extent of introduction of smart meters should be specified during this process in order to gain the maximum benefit for the whole society (consumers, grid companies, state authorities), because there are still many uncertain and variable factors. For example, it is necessary to consider statistical load variations by hour, dependence of electricity consumption on temperature fluctuations, consumer behaviour and demand response to market signals to reduce electricity consumption in the short and long term, consumer's ambitions and capability to install home automation for regulation of electricity consumption. To develop the demand response, it is necessary to analyse the whole array of additional factors, such as expected cost reduction of smart meters, possible extension of their functionality, further development of information exchange systems, as well as standard requirements and different political and regulatory decisions regarding the reduction of electricity consumption and energy efficiency.

MOSES Support Platform

DTIC Science & Technology

2008-02-01

drain with collector • Final pressure switch with gauge and automatic shut- off • (2) Hour meter • Oil filled finel pressure gauge 0~400bar/5800psi...Automatic condensate drain system Final pressure switch with gauge and automatic shut-off (2) Hour meter, (2) On/Off Switch Filling Connection Four

25 CFR 175.24 - Utility responsibilities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN ELECTRIC POWER UTILITIES...; (e) Read meters or authorize the customer(s) to read meters at intervals prescribed in the operations manual, service agreement, or special contract, except in those situations where the meter cannot be read...

Oil field management system

DOEpatents

Fincke, James R.

2003-09-23

Oil field management systems and methods for managing operation of one or more wells producing a high void fraction multiphase flow. The system includes a differential pressure flow meter which samples pressure readings at various points of interest throughout the system and uses pressure differentials derived from the pressure readings to determine gas and liquid phase mass flow rates of the high void fraction multiphase flow. One or both of the gas and liquid phase mass flow rates are then compared with predetermined criteria. In the event such mass flow rates satisfy the predetermined criteria, a well control system implements a correlating adjustment action respecting the multiphase flow. In this way, various parameters regarding the high void fraction multiphase flow are used as control inputs to the well control system and thus facilitate management of well operations.

40 CFR 85.2232 - Calibrations, adjustments-EPA 81.

Code of Federal Regulations, 2010 CFR

2010-07-01

... checks. Within one hour prior to a test, the analyzers shall be zeroed and spanned. Ambient air is acceptable as a zero gas; an electrical span check is acceptable. Zero and span checks shall be made on the lowest range capable of reading the short test standard. Analyzers that perform an automatic zero/span...

Wireless Communications in Smart Grid

NASA Astrophysics Data System (ADS)

Bojkovic, Zoran; Bakmaz, Bojan

Communication networks play a crucial role in smart grid, as the intelligence of this complex system is built based on information exchange across the power grid. Wireless communications and networking are among the most economical ways to build the essential part of the scalable communication infrastructure for smart grid. In particular, wireless networks will be deployed widely in the smart grid for automatic meter reading, remote system and customer site monitoring, as well as equipment fault diagnosing. With an increasing interest from both the academic and industrial communities, this chapter systematically investigates recent advances in wireless communication technology for the smart grid.

Design considerations for implementation of large scale automatic meter reading systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mak, S.; Radford, D.

1995-01-01

This paper discusses the requirements imposed on the design of an AMR system expected to serve a large (> 1 million) customer base spread over a large geographical area. Issues such as system throughput response time, and multi-application expendability are addressed, all of which are intimately dependent on the underlying communication system infrastructure, the local geography, the customer base, and the regulatory environment. A methodology for analysis, assessment, and design of large systems is presented. For illustration, two communication systems -- a low power RF/PLC system and a power frequency carrier system -- are analyzed and discussed.

The design of the multipurpose Lusi drone. When technology can access harsh environments.

NASA Astrophysics Data System (ADS)

Romeo, Giovanni; Di Stefano, Giuseppe; Mazzini, Adriano; Iarocci, Alessandro

2016-04-01

Extreme and inaccessible environments are a new frontier that unmanned and remotely operated vehicles can today safely access and monitor. The Lusi mud eruption (NE Java Island, Indonesia) represents one of these harsh environments that are totally unreachable with traditional techniques. Here boiling mud is constantly spewed tens of meters in height and tall gas clouds surround the 100 meters wide active crater. The crater is surrounded by a 600 meters circular zone of hot mud that prevents any approach to investigate and sample the eruption site. In the framework of the Lusi Lab project (ERC grant n° 308126) we assembled and designed a multipurpose drone to survey the eruption site. The Lusi drone is equipped with numerous airborne devices suitable for use on board of other multicopters. During the missions three cameras can complete 1) video survey, 2) high resolution photogrammetry of desired and preselected polygons, and 3) thermal photogrammetry surveys with infra-red camera to locate hot fluids seepage areas or faulted zones. Crater sampling and monitoring operations can be pre-planned with a flight software, and the pilot is required only for take-off and landing. An automatic winch allows the deployment of gas, mud and water samplers and contact thermometers to be operated with no risk for the aircraft. During the winch operations (that can be performed automatically) the aircraft hovers at a safety height until the tasks are completed while being controlled by the winch embedded processor. The drone is also equipped with a GPS connected CO2 and CH4 sensors. Gridded surveys using these devices allowed obtaining 2D maps of the concentration and distribution of various gasses over the area covered by the flight path.

Miniaturized Water Flow and Level Monitoring System for Flood Disaster Early Warning

NASA Astrophysics Data System (ADS)

Ifedapo Abdullahi, Salami; Hadi Habaebi, Mohamed; Surya Gunawan, Teddy; Rafiqul Islam, MD

2017-11-01

This study presents the performance of a prototype miniaturised water flow and water level monitoring sensor designed towards supporting flood disaster early warning systems. The design involved selection of sensors, coding to control the system mechanism, and automatic data logging and storage. During the design phase, the apparatus was constructed where all the components were assembled using locally sourced items. Subsequently, under controlled laboratory environment, the system was tested by running water through the inlet during which the flow rate and rising water levels are automatically recorded and stored in a database via Microsoft Excel using Coolterm software. The system is simulated such that the water level readings measured in centimeters is output in meters using a multiplicative of 10. A total number of 80 readings were analyzed to evaluate the performance of the system. The result shows that the system is sensitive to water level rise and yielded accurate measurement of water level. But, the flow rate fluctuates due to the manual water supply that produced inconsistent flow. It was also observed that the flow sensor has a duty cycle of 50% of operating time under normal condition which implies that the performance of the flow sensor is optimal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lachut, J. S.

Laboratory tests have been completed to test the validity of automated solubility measurement equipment using sodium nitrate and sodium chloride solutions (see test plan WRPS-1404441, “Validation Testing for Automated Solubility Measurement Equipment”). The sodium nitrate solution results were within 2-3% of the reference values, so the experiment is considered successful using the turbidity meter. The sodium chloride test was done by sight, as the turbidity meter did not work well using sodium chloride. For example, the “clear” turbidity reading was 53 FNU at 80 °C, 107 FNU at 55 °C, and 151 FNU at 20 °C. The sodium chloride didmore » not work because it is granular and large; as the solution was stirred, the granules stayed to the outside of the reactor and just above the stir bar level, having little impact on the turbidity meter readings as the meter was aimed at the center of the solution. Also, the turbidity meter depth has an impact. The salt tends to remain near the stir bar level. If the meter is deeper in the slurry, it will read higher turbidity, and if the meter is raised higher in the slurry, it will read lower turbidity (possibly near zero) because it reads the “clear” part of the slurry. The sodium chloride solution results, as measured by sight rather than by turbidity instrument readings, were within 5-6% of the reference values.« less

Moisture meter calibration for untreated and ACQ-treated southern yellow pine plywood

Treesearch

Samuel V. Glass; Charles G. Carll

2009-01-01

Conductance moisture meter readings using stainless steel screws as electrodes were compared with gravimetric moisture content for 1) southern yellow pine (SYP) dimensioned lumber, 2) untreated (underlayment grade) SYP plywood, and 3) SYP plywood treated with alkaline copper quaternary. Meter readings were taken with the meter set to the manufacturer-provided species...

Automatic range selector

DOEpatents

McNeilly, Clyde E.

1977-01-04

A device is provided for automatically selecting from a plurality of ranges of a scale of values to which a meter may be made responsive, that range which encompasses the value of an unknown parameter. A meter relay indicates whether the unknown is of greater or lesser value than the range to which the meter is then responsive. The rotatable part of a stepping relay is rotated in one direction or the other in response to the indication from the meter relay. Various positions of the rotatable part are associated with particular scales. Switching means are sensitive to the position of the rotatable part to couple the associated range to the meter.

Method and apparatus for manufacturing gas tags

DOEpatents

Gross, K.C.; Laug, M.T.

1996-12-17

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

Method and apparatus for manufacturing gas tags

DOEpatents

Gross, Kenny C.; Laug, Matthew T.

1996-01-01

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

Vision Problems and Reduced Reading Outcomes in Queensland Schoolchildren.

PubMed

Hopkins, Shelley; Sampson, Geoff P; Hendicott, Peter L; Wood, Joanne M

2017-03-01

To assess the relationship between vision and reading outcomes in Indigenous and non-Indigenous schoolchildren to determine whether vision problems are associated with lower reading outcomes in these populations. Vision testing and reading assessments were performed on 508 Indigenous and non-Indigenous schoolchildren in Queensland, Australia divided into two age groups: Grades 1 and 2 (6-7 years of age) and Grades 6 and 7 (12-13 years of age). Vision parameters measured included cycloplegic refraction, near point of convergence, heterophoria, fusional vergence range, rapid automatized naming, and visual motor integration. The following vision conditions were then classified based on the vision findings: uncorrected hyperopia, convergence insufficiency, reduced rapid automatized naming, and delayed visual motor integration. Reading accuracy and reading comprehension were measured with the Neale reading test. The effect of uncorrected hyperopia, convergence insufficiency, reduced rapid automatized naming, and delayed visual motor integration on reading accuracy and reading comprehension were investigated with ANCOVAs. The ANCOVAs explained a significant proportion of variance in both reading accuracy and reading comprehension scores in both age groups, with 40% of the variation in reading accuracy and 33% of the variation in reading comprehension explained in the younger age group, and 27% and 10% of the variation in reading accuracy and reading comprehension, respectively, in the older age group. The vision parameters of visual motor integration and rapid automatized naming were significant predictors in all ANCOVAs (P < .01). The direction of the relationship was such that reduced reading results were explained by reduced visual motor integration and rapid automatized naming results. Both reduced rapid automatized naming and visual motor integration were associated with poorer reading outcomes in Indigenous and non-Indigenous children. This is an important finding given the recent emphasis placed on Indigenous children's reading skills and the fact that reduced rapid automatized naming and visual motor integration skills are more common in this group.

How Reliable Are ATP Bioluminescence Meters in Assessing Decontamination of Environmental Surfaces in Healthcare Settings?

PubMed Central

Omidbakhsh, Navid; Ahmadpour, Faraz; Kenny, Nicole

2014-01-01

Background Meters based on adenosine triphosphate (ATP) bioluminescence measurements in relative light units (RLU) are often used to rapidly assess the level of cleanliness of environmental surfaces in healthcare and other settings. Can such ATP measurements be adversely affected by factors such as soil and cleaner-disinfectant chemistry? Objective This study tested a number of leading ATP meters for their sensitivity, linearity of the measurements, correlation of the readings to the actual microbial contamination, and the potential disinfectant chemicals’ interference in their readings. Methods First, solutions of pure ATP in various concentrations were used to construct a standard curve and determine linearity and sensitivity. Serial dilutions of a broth culture of Staphylococcus aureus, as a representative nosocomial pathogen, were then used to determine if a given meter’s ATP readings correlated with the actual CFUs. Next, various types of disinfectant chemistries were tested for their potential to interfere with the standard ATP readings. Results All four ATP meters tested herein demonstrated acceptable linearity and repeatability in their readings. However, there were significant differences in their sensitivity to detect the levels of viable microorganisms on experimentally contaminated surfaces. Further, most disinfectant chemistries tested here quenched the ATP readings variably in different ATP meters evaluated. Conclusions Apart from their limited sensitivity in detecting low levels of microbial contamination, the ATP meters tested were also prone to interference by different disinfectant chemistries. PMID:24940751

18 CFR 367.9020 - Account 902, Meter reading expenses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Account 902, Meter reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... expenses. (a) This account must include the cost of labor, materials used and expenses incurred in reading...

18 CFR 367.9020 - Account 902, Meter reading expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Account 902, Meter reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... expenses. (a) This account must include the cost of labor, materials used and expenses incurred in reading...

18 CFR 367.9020 - Account 902, Meter reading expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Account 902, Meter reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... expenses. (a) This account must include the cost of labor, materials used and expenses incurred in reading...

18 CFR 367.9020 - Account 902, Meter reading expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Account 902, Meter reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... expenses. (a) This account must include the cost of labor, materials used and expenses incurred in reading...

An application of data mining in district heating substations for improving energy performance

NASA Astrophysics Data System (ADS)

Xue, Puning; Zhou, Zhigang; Chen, Xin; Liu, Jing

2017-11-01

Automatic meter reading system is capable of collecting and storing a huge number of district heating (DH) data. However, the data obtained are rarely fully utilized. Data mining is a promising technology to discover potential interesting knowledge from vast data. This paper applies data mining methods to analyse the massive data for improving energy performance of DH substation. The technical approach contains three steps: data selection, cluster analysis and association rule mining (ARM). Two-heating-season data of a substation are used for case study. Cluster analysis identifies six distinct heating patterns based on the primary heat of the substation. ARM reveals that secondary pressure difference and secondary flow rate have a strong correlation. Using the discovered rules, a fault occurring in remote flow meter installed at secondary network is detected accurately. The application demonstrates that data mining techniques can effectively extrapolate potential useful knowledge to better understand substation operation strategies and improve substation energy performance.

Investigation of basic cognitive predictors of reading and spelling abilities in Tunisian third-grade primary school children.

PubMed

Batnini, Soulef; Uno, Akira

2015-06-01

This study investigated first the main cognitive abilities; phonological processing, visual cognition, automatization and receptive vocabulary in predicting reading and spelling abilities in Arabic. Second, we compared good/poor readers and spellers to detect the characteristics of cognitive predictors which contribute to identifying reading and spelling difficulties in Arabic speaking children. A sample of 116 Tunisian third-grade children was tested on their abilities to read and spell, phonological processing, visual cognition, automatization and receptive vocabulary. For reading, phonological processing and automatization uniquely predicted Arabic word reading and paragraph reading abilities. Automatization uniquely predicted Arabic non-word reading ability. For spelling, phonological processing was a unique predictor for Arabic word spelling ability. Furthermore, poor readers had significantly lower scores on the phonological processing test and slower reading times on the automatization test as compared with good readers. Additionally, poor spellers showed lower scores on the phonological processing test as compared with good spellers. Visual cognitive processing and receptive vocabulary were not significant cognitive predictors of Arabic reading and spelling abilities for Tunisian third grade children in this study. Our results are consistent with previous studies in alphabetic orthographies and demonstrate that phonological processing and automatization are the best cognitive predictors in detecting early literacy problems. We suggest including phonological processing and automatization tasks in screening tests and in intervention programs may help Tunisian children with poor literacy skills overcome reading and spelling difficulties in Arabic. Copyright © 2014 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

The Interplay between Automatic and Control Processes in Reading.

ERIC Educational Resources Information Center

Walczyk, Jeffrey J.

2000-01-01

Reviews prominent reading theories in light of their accounts of how automatic and control processes combine to produce successful text comprehension, and the trade-offs between the two. Presents the Compensatory-Encoding Model of reading, which explicates how, when, and why automatic and control processes interact. Notes important educational…

40 CFR 92.117 - Gas meter or flow instrumentation calibration, particulate measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Gas meter or flow instrumentation... ENGINES Test Procedures § 92.117 Gas meter or flow instrumentation calibration, particulate measurement. (a) Sampling for particulate emissions requires the use of gas meters or flow instrumentation to...

40 CFR 92.117 - Gas meter or flow instrumentation calibration, particulate measurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Gas meter or flow instrumentation... ENGINES Test Procedures § 92.117 Gas meter or flow instrumentation calibration, particulate measurement. (a) Sampling for particulate emissions requires the use of gas meters or flow instrumentation to...

40 CFR 92.117 - Gas meter or flow instrumentation calibration, particulate measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Gas meter or flow instrumentation... ENGINES Test Procedures § 92.117 Gas meter or flow instrumentation calibration, particulate measurement. (a) Sampling for particulate emissions requires the use of gas meters or flow instrumentation to...

40 CFR 92.117 - Gas meter or flow instrumentation calibration, particulate measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Gas meter or flow instrumentation... ENGINES Test Procedures § 92.117 Gas meter or flow instrumentation calibration, particulate measurement. (a) Sampling for particulate emissions requires the use of gas meters or flow instrumentation to...

40 CFR 92.117 - Gas meter or flow instrumentation calibration, particulate measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Gas meter or flow instrumentation... ENGINES Test Procedures § 92.117 Gas meter or flow instrumentation calibration, particulate measurement. (a) Sampling for particulate emissions requires the use of gas meters or flow instrumentation to...

Tele-healthcare for diabetes management: A low cost automatic approach.

PubMed

Benaissa, M; Malik, B; Kanakis, A; Wright, N P

2012-01-01

In this paper, a telemedicine system for managing diabetic patients with better care is presented. The system is an end to end solution which relies on the integration of front end (patient unit) and backend web server. A key feature of the system developed is the very low cost automated approach. The front-end of the system is capable of reading glucose measurements from any glucose meter and sending them automatically via existing networks to the back-end server. The back-end is designed and developed using n-tier web client architecture based on model-view-controller design pattern using open source technology, a cost effective solution. The back-end helps the health-care provider with data analysis; data visualization and decision support, and allows them to send feedback and therapeutic advice to patients from anywhere using a browser enabled device. This system will be evaluated during the trials which will be conducted in collaboration with a local hospital in phased manner.

Automatic Rotational Sky Quality Meter (R-SQM) Design and Software for Astronomical Observatories

NASA Astrophysics Data System (ADS)

Dogan, E.; Ozbaldan, E. E.; Shameoni, Niaei M.; Yesilyaprak, C.

2016-12-01

We have presented the new design of Sky Quality Meter (SQM) device that is an automatic rotational model of sky quality meter (R-SQM) carried out by DAG (Eastern Anatolia Observatory) Technical Team. R-SQM is required for determining the long-term changes of sky quality of an astronomical observatory and consists of four SQM devices mounted on a rotating shaft with different angles for scanning all sky. This system is controlled by a Raspberry Pi control card and a step motor with its driver and a special software.

Application of semi-active RFID power meter in automatic verification pipeline and intelligent storage system

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

In this paper, the semi-active RFID watt-hour meter is applied to automatic test lines and intelligent warehouse management, from the transmission system, test system and auxiliary system, monitoring system, realize the scheduling of watt-hour meter, binding, control and data exchange, and other functions, make its more accurate positioning, high efficiency of management, update the data quickly, all the information at a glance. Effectively improve the quality, efficiency and automation of verification, and realize more efficient data management and warehouse management.

Image based automatic water meter reader

NASA Astrophysics Data System (ADS)

Jawas, N.; Indrianto

2018-01-01

Water meter is used as a tool to calculate water consumption. This tool works by utilizing water flow and shows the calculation result with mechanical digit counter. Practically, in everyday use, an operator will manually check the digit counter periodically. The Operator makes logs of the number shows by water meter to know the water consumption. This manual operation is time consuming and prone to human error. Therefore, in this paper we propose an automatic water meter digit reader from digital image. The digits sequence is detected by utilizing contour information of the water meter front panel.. Then an OCR method is used to get the each digit character. The digit sequence detection is an important part of overall process. It determines the success of overall system. The result shows promising results especially in sequence detection.

MICROROC: MICRO-mesh gaseous structure Read-Out Chip

NASA Astrophysics Data System (ADS)

Adloff, C.; Blaha, J.; Chefdeville, M.; Dalmaz, A.; Drancourt, C.; Dulucq, F.; Espargilière, A.; Gaglione, R.; Geffroy, N.; Jacquemier, J.; Karyotakis, Y.; Martin-Chassard, G.; Prast, J.; Seguin-Moreau, N.; de La Taille, Ch; Vouters, G.

2012-01-01

MICRO MEsh GAseous Structure (MICROMEGAS) and Gas Electron Multipliers (GEM) detectors are two candidates for the active medium of a Digital Hadronic CALorimeter (DHCAL) as part of a high energy physics experiment at a future linear collider (ILC/CLIC). Physics requirements lead to a highly granular hadronic calorimeter with up to thirty million channels with probably only hit information (digital readout calorimeter). To validate the concept of digital hadronic calorimetry with such small cell size, the construction and test of a cubic meter technological prototype, made of 40 planes of one square meter each, is necessary. This technological prototype would contain about 400 000 electronic channels, thus requiring the development of front-end ASIC. Based on the experience gained with previous ASIC that were mounted on detectors and tested in particle beams, a new ASIC called MICROROC has been developped. This paper summarizes the caracterisation campaign that was conducted on this new chip as well as its integration into a large area Micromegas chamber of one square meter.

[Evaluation of vaporizers by anesthetic gas monitors corrected with a new method for preparation of calibration gases].

PubMed

Kurashiki, T

1996-11-01

For resolving the discrepancy of concentrations found among anesthetic gas monitors, the author proposed a new method using a vaporizer as a standard anesthetic gas generator for calibration. In this method, the carrier gas volume is measured by a mass flow meter (SEF-510 + FI-101) installed before the inlet of the vaporizer. The vaporized weight of volatile anesthetic agent is simultaneously measured by an electronic force balance (E12000S), on which the vaporizer is placed directly. The molar percent of the anesthetic is calculated using these data and is transformed into the volume percent. These gases discharging from the vaporizer are utilized for calibrating anesthetic gas monitors. These monitors are normalized by the linear equation describing the relationship between concentrations of calibration gases and readings of the anesthetic gas monitors. By using normalized monitors, flow rate-concentration performance curves of several anesthetic vaporizers were obtained. The author concludes that this method can serve as a standard in evaluating anesthetic vaporizers.

On-site flow calibration of turbine meters for natural gas custody transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ting, V.C.; Schexnayder, L.L.; Conkling, D.B.

1991-05-01

This paper presents the design criteria, performance characteristics, and calibration procedures relating to a turbine-meter flow-calibration facility used in the high-volume custody transfer of natural gas. The facility, located in Venice, LA, is owned and operated by Chevron U.S.A. Inc. and is used to meter sales volumes of up to 500 MMscf/D (14.16 {times} 10 std m{sup 3}/d) at a nominal operating pressure of 1,000 psig (6.9 MPa). The system includes three 12-in. (30.48 cm) turbine meters used for sales-volume measurement, a bank of sonic nozzles, and a master turbine meter connected in series with the sales meters. The sonicmore » nozzles and master meter serve as flow-proving and -calibration devices. sonic nozzles are recommended by the turbine-meter standard for meter calibration. This paper examines the performance of on-site calibration of gas turbine meters. The Venice facility successfully demonstrated that on-site calibration of gas-metering devices can ensure accurate gas-flow measurement under field conditions.« less

30 CFR 250.1203 - Gas measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Security § 250.1203 Gas measurement. (a) To which meters do MMS requirements for gas measurement apply? MMS requirements for gas measurements apply to all OCS gas royalty and allocation meters. (b) What are the... throughout the system. (4) Equip the meter with a chart or electronic data recorder. If an electronic data...

The Anti-RFI Design of Intelligent Electric Energy Meters with UHF RFID

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

In order to solve the existing artificial meter reading watt-hour meter industry is still slow and inventory of common problems, using the uhf radio frequency identification (RFID) technology and intelligent watt-hour meter depth fusion, which has a one-time read multiple tags, identification distance, high transmission rate, high reliability, etc, while retaining the original asset management functions, in order to ensure the uhf RFID and minimum impact on the operation of the intelligent watt-hour meter, proposed to improve the stability of the electric meter system while working at the same time, this paper designs the uhf RFID intelligent watt-hour meter radio frequency interference resistance, put forward to improve intelligent watt-hour meter electromagnetic compatibility design train of thought, and introduced its power and the hardware circuit design of printed circuit board, etc.

Electronic field permeameter

DOEpatents

Chandler, Mark A.; Goggin, David J.; Horne, Patrick J.; Kocurek, Gary G.; Lake, Larry W.

1989-01-01

For making rapid, non-destructive permeability measurements in the field, a portable minipermeameter of the kind having a manually-operated gas injection tip is provided with a microcomputer system which operates a flow controller to precisely regulate gas flow rate to a test sample, and reads a pressure sensor which senses the pressure across the test sample. The microcomputer system automatically turns on the gas supply at the start of each measurement, senses when a steady-state is reached, collects and records pressure and flow rate data, and shuts off the gas supply immediately after the measurement is completed. Preferably temperature is also sensed to correct for changes in gas viscosity. The microcomputer system may also provide automatic zero-point adjustment, sensor calibration, over-range sensing, and may select controllers, sensors, and set-points for obtaining the most precise measurements. Electronic sensors may provide increased accuracy and precision. Preferably one microcomputer is used for sensing instrument control and data collection, and a second microcomputer is used which is dedicated to recording and processing the data, selecting the sensors and set-points for obtaining the most precise measurements, and instructing the user how to set-up and operate the minipermeameter. To provide mass data collection and user-friendly operation, the second microcomputer is preferably a lap-type portable microcomputer having a non-volatile or battery-backed CMOS memory.

Fission Meter Information Barrier Attribute Measurement System: Task 1 Report: Document existing Fission Meter neutron IB system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerr, P. L.

An SNM attribute Information Barrier (IB) system was developed for a 2011 US/UK Exercise. The system was modified and extensively tested in a 2013-2014 US-UK Measurement Campaign. This work demonstrated rapid deployment of an IB system for potential treaty use. The system utilizes an Ortec Fission Meter neutron multiplicity counter and custom computer code. The system demonstrates a proof-of-principle automated Pu-240 mass determination with an information barrier. After a software start command is issued, the system automatically acquires and downloads data, performs an analysis, and displays the results. This system conveys the results of a Pu mass threshold measurements inmore » a way the does not reveal sensitive information. In full IB mode, only red/green ‘lights’ are displayed in the software. In test mode, more detailed information is displayed. The code can also read in, analyze, and display results from previously acquired or simulated data. Because the equipment is commercial-off-the-shelf (COTS), the system demonstrates a low-cost short-lead-time technology for treaty SNM attribute measurements. A deployed system will likely require integration of additional authentication and tamper-indicating technologies. This will be discussed for the project in this and future progress reports.« less

Finite element analysis of cylinder shell resonator and design of intelligent density meter

NASA Astrophysics Data System (ADS)

W, Sui X.; M, Fan Y.; X, Zhang G.; R, Qiu Z.

2005-01-01

On the basis of the mathematical model and finite element analysis of the cylinder shell resonator, a novel resonant liquid density meter is designed. The meter consists of a cylinder shell resonator fixed on both ends, a measurement circuit with automatic gain control and automatic phase control, and a signal processing system with microcomputer unit C8051F021. The density meter is insensitive to the liquid pressure, and it can intelligently compensate for the temperature. The experiment results show the meter characteristic coefficients of K0, K1, and K2 at 25 centigrade are -129.5668 kg m-3, -0.2535 × 106 kg m-3 s-1 and 0.6239 × 1010 kg m-3 s-2, respectively. The accuracy of the sensor is ±0.1% in range of 700-900 kg m-3

Reading Ability Is Negatively Related to Stroop Interference

ERIC Educational Resources Information Center

Protopapas, Athanassios; Archonti, Anastasia; Skaloumbakas, Christos

2007-01-01

Stroop interference is often taken as evidence for reading automaticity even though young and poor readers, who presumably lack reading automaticity, present strong interference. Here the relationship between reading skills and Stroop interference was studied in a 7th-grade sample. Greater interference was observed in children diagnosed with…

GAS PHOTOTUBE CIRCUIT

DOEpatents

Richardson, J.H.

1958-03-01

This patent pertains to electronic circuits for measuring the intensity of light and is especially concerned with measurement between preset light thresholds. Such a circuit has application in connection with devices for reading-out information stored on punch cards or tapes where the cards and tapes are translucent. By the novel arrangement of this invention thc sensitivity of a gas phototube is maintained at a low value when the light intensity is below a first threshold level. If the light level rises above the first threshold level, the tube is rendered highly sensitive and an output signal will vary in proportion to the light intensity change. When the light level decreases below a second threshold level, the gas phototube is automatically rendered highly insensitive. Each of these threshold points is adjustable.

The Vernier Caliper and Significant Figures.

ERIC Educational Resources Information Center

Oberhofer, E. S.

1985-01-01

Misconceptions occur because the caliper is often read with the same significant figures as a meter stick; however, the precision of the vernier caliper is greater than the precision of a meter stick. Clarification of scale reading, precision of both tools, and significant figures are discussed. (JN)

Energy Autonomous Wireless Water Meter with Integrated Turbine Driven Energy Harvester

NASA Astrophysics Data System (ADS)

Becker, P.; Folkmer, B.; Goepfert, R.; Hoffmann, D.; Willmann, A.; Manoli, Y.

2013-12-01

Accurate meter reading is the fundamental task of the home water system for the handling of payments. Meters need to be read correctly, to avoid an effect of adding events that increase unnecessary cost and create customer dissatisfaction. This paper presents a fully integrated wireless, energy autonomous water metering system based on the European Standard EN 13757 "Communication systems for meters and remote reading of meters". The system can be used in multiple water metering scenarios. No maintenance will be required and the system will provide precise and secure data transmission as well as timely and accurate recording of the consumption of water. The identification of any leakages will be improved through the analysis of the actual quantity supplied and recorded by the meters. The system is powered by an energy harvester, based on a water driven turbine wheel that is directly coupled to an electromagnetic energy transducer. The power delivered by the generator is dependent of the amount of flowing water and the pressure in the water pipes. Therefor the power is commonly non-continuous, fluctuant and unstable in the voltage amplitude. To be able to report the meter readings at all times, the system needs to be powered not only in times when the energy harvester delivers energy. Therefor an energy buffer, that stores the harvested energy, is installed to compensate the energy requirement between the actual generator output and the energy consumption of the application. Besides a complete system overview, the presentation will focus on the power management and energy aware battery charging circuitry. The design, fabrication, measuring results and the preparations for field tests in rural and urban environment will be presented and discussed.

75 FR 42330 - Elemental Mercury Used in Flow Meters, Natural Gas Manometers, and Pyrometers; Significant New...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

..., the sale of mercury-containing flow meters is banned in six states: California, Maine, Massachusetts... Elemental Mercury Used in Flow Meters, Natural Gas Manometers, and Pyrometers; Significant New Use Rule... mercury (CAS No. 7439-97-6) for use in flow meters, natural gas manometers, and pyrometers, except for use...

Cognitive Mechanism Underlying the Relationship between Rapid Automatized Naming and Reading: A Longitudinal Study on Bilingual Children

ERIC Educational Resources Information Center

Yeung, Susanna S.

2016-01-01

Rapid automatized naming has been demonstrated as an important correlate of various reading outcomes. However, the cognitive mechanism underlying the RAN-reading relationship is not well understood. The primary goal of this study is to evaluate three major theoretical accounts for the RAN--reading relationship: phonological processing account,…

Integrated lab-in-syringe platform incorporating a membraneless gas-liquid separator for automatic cold vapor atomic absorption spectrometry.

PubMed

Giakisikli, Georgia; Miró, Manuel; Anthemidis, Aristidis

2013-10-01

This manuscript reports the proof-of-concept of a novel integrated lab-in-syringe/gas-liquid separation (LIS/GLS) batch-flow system based on a programmable flow for automatic cold vapor atomic absorption spectrometric assays. Homogeneous mixing of metered volumes of sample and reagent solutions drawn up in a sandwich-type mode along with in situ vapor generation are accomplished inside the microsyringe in a closed manner, while the separation of vapor species is achieved via the membraneless GLS located at the top of the syringe's valve in the upright position. The potentials of the proposed manifold were demonstrated for trace inorganic mercury determination in drinking waters and seawater. For a 3.0 mL sample, the limit of detection and repeatability (RSD) were found to be 0.03 μg L(-1) Hg(II) and 3.1% (at the 2.0 μg L(-1) concentration level), respectively, with a dynamic range extending up to 10.0 μg L(-1). The proposed system fulfills the requirements of US-EPA, WHO, and EU Council Directives for measurements of the maximum allowed concentrations of inorganic mercury in drinking water.

Study on Morphological Awareness and Rapid Automatized Naming through Word Reading and Comprehension in Normal and Disabled Reading Arabic-Speaking Children

ERIC Educational Resources Information Center

Layes, Smail; Lalonde, Robert; Rebaï, Mohamed

2017-01-01

This study explored the role and extent of the involvement of morphological awareness (MA) in contrast to rapid automatized naming (RAN) in word reading and comprehension of Arabic as a morphologically based orthography. We gave measures of word reading, reading comprehension, MA, and RAN in addition to a nonverbal mental ability test to 3 groups…

What is the best method to evaluate urine pH? A trial of three urinary pH measurement methods in a stone clinic.

PubMed

Ilyas, Rebecca; Chow, Karyee; Young, J Graham

2015-01-01

Monitoring of urinary pH is an important part of the assessment of patients with urinary tract stones. It provides valuable information about the future stone risk of certain patients and further allows the effective tailoring of medical intervention. Accurate measurement is therefore essential in these patients. The purpose of this study was to determine the most accurate method of measuring urinary pH in an outpatient setting. Materials, Methods, and Participants: Urine samples were collected from 200 patients attending stone clinics at The University Hospital of South Manchester. pH was measured by three commonly used methods: Siemens Clinitek Status pH meter, a hand-held pH meter, and litmus paper read visually. Results were compared with readings simultaneously obtained from a bench-top laboratory pH machine, which is the reference method for pH measurement. The pH readings obtained were analyzed using the Bland-Altman plot. When compared with the reference method, the hand-held pH meter differed the least with a mean bias of 0.0073 and a maximum under-read of -0.2 pH units and maximum over-read of +0.2 pH units. The Siemens Clinitek pH meter differed most with a mean bias of -0.108, with a maximum over-read of +0.99 pH units and a maximum under-read of 0.78 pH units. The pH values obtained with the litmus paper gave similar results to that of the Clinitek pH meter with a mean bias of -0.069, with a maximum over-read of 0.96 and maximum under-read of 0.82 pH units. The hand-held pH device gave urinary pH readings that most closely and consistently matched those of the reference bench-top laboratory machine. This method of pH measurement should be considered in stone clinics in patients with pH-dependent stone risk.

State-of-charge coulometer

NASA Technical Reports Server (NTRS)

Rowlette, J. J. (Inventor)

1985-01-01

A coulometer for accurately measuring the state-of-charge of an open-cell battery utilizing an aqueous electrolyte, includes a current meter for measuring the battery/discharge current and a flow meter for measuring the rate at which the battery produces gas during charge and discharge. Coupled to the flow meter is gas analyzer which measures the oxygen fraction of the battery gas. The outputs of the current meter, flow meter, and gas analyzer are coupled to a programmed microcomputer which includes a CPU and program and data memories. The microcomputer calculates that fraction of charge and discharge current consumed in the generation of gas so that the actual state-of-charge can be determined. The state-of-charge is then shown on a visual display.

Advanced planning surveys using automatic license plate reading equipment and evaluation of automatic license plate reading equipment for advanced planning

DOT National Transportation Integrated Search

1998-05-01

Recent technological advances in computer hardware, software, and image processing have led to the development of automated license plate reading equipment. This equipment has primarily been developed for enforcement and security applications, such a...

Reading recognition of pointer meter based on pattern recognition and dynamic three-points on a line

NASA Astrophysics Data System (ADS)

Zhang, Yongqiang; Ding, Mingli; Fu, Wuyifang; Li, Yongqiang

2017-03-01

Pointer meters are frequently applied to industrial production for they are directly readable. They should be calibrated regularly to ensure the precision of the readings. Currently the method of manual calibration is most frequently adopted to accomplish the verification of the pointer meter, and professional skills and subjective judgment may lead to big measurement errors and poor reliability and low efficiency, etc. In the past decades, with the development of computer technology, the skills of machine vision and digital image processing have been applied to recognize the reading of the dial instrument. In terms of the existing recognition methods, all the parameters of dial instruments are supposed to be the same, which is not the case in practice. In this work, recognition of pointer meter reading is regarded as an issue of pattern recognition. We obtain the features of a small area around the detected point, make those features as a pattern, divide those certified images based on Gradient Pyramid Algorithm, train a classifier with the support vector machine (SVM) and complete the pattern matching of the divided mages. Then we get the reading of the pointer meter precisely under the theory of dynamic three points make a line (DTPML), which eliminates the error caused by tiny differences of the panels. Eventually, the result of the experiment proves that the proposed method in this work is superior to state-of-the-art works.

Satellite control of electric power distribution

NASA Technical Reports Server (NTRS)

Bergen, L.

1981-01-01

An L-band frequencies satellite link providing the medium for direct control of electrical loads at individual customer sites from remote central locations is described. All loads supplied under interruptible-service contracts are likely condidates for such control, and they can be cycled or switched off to reduce system loads. For every kW of load eliminated or deferred to off-peak hours, the power company reduces its need for additional generating capacity. In addition, the satellite could switch meter registers so that their readings automatically reflected the time of consumption. The system would perform load-shedding operations during emergencies, disconnecting large blocks of load according to predetermined priorities. Among the distribution operations conducted by the satellite in real time would be: load reconfiguration, voltage regulation, fault isolation, and capacitor and feeder load control.

75 FR 70900 - Certain Iron Construction Castings From Brazil, Canada, and the People's Republic of China...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-19

... encase water, gas, or other valves, or water and gas meters, classifiable as light castings under HTS... systems; and valve, service, and meter boxes which are placed below ground to encase water, gas, or other valves, or water or gas meters. These articles must be of cast iron, not alloyed, and not malleable. This...

40 CFR 86.1320-90 - Gas meter or flow instrumentation calibration; particulate, methanol, and formaldehyde measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Gas meter or flow instrumentation... instrumentation calibration; particulate, methanol, and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters or flow instrumentation to determine...

40 CFR 86.1320-90 - Gas meter or flow instrumentation calibration; particulate, methanol, and formaldehyde measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Gas meter or flow instrumentation... instrumentation calibration; particulate, methanol, and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters or flow instrumentation to determine...

40 CFR 86.1320-90 - Gas meter or flow instrumentation calibration; particulate, methanol, and formaldehyde measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Gas meter or flow instrumentation... instrumentation calibration; particulate, methanol, and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters or flow instrumentation to determine...

40 CFR 86.1320-90 - Gas meter or flow instrumentation calibration; particulate, methanol, and formaldehyde measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Gas meter or flow instrumentation... instrumentation calibration; particulate, methanol, and formaldehyde measurement. (a) Sampling for particulate, methanol and formaldehyde emissions requires the use of gas meters or flow instrumentation to determine...

Evaluation of the effects of insufficient blood volume samples on the performance of blood glucose self-test meters.

PubMed

Pfützner, Andreas; Schipper, Christina; Ramljak, Sanja; Flacke, Frank; Sieber, Jochen; Forst, Thomas; Musholt, Petra B

2013-11-01

Accuracy of blood glucose readings is (among other things) dependent on the test strip being completely filled with sufficient sample volume. The devices are supposed to display an error message in case of incomplete filling. This laboratory study was performed to test the performance of 31 commercially available devices in case of incomplete strip filling. Samples with two different glucose levels (60-90 and 300-350 mg/dl) were used to generate three different sample volumes: 0.20 µl (too low volume for any device), 0.32 µl (borderline volume), and 1.20 µl (low but supposedly sufficient volume for all devices). After a point-of-care capillary reference measurement (StatStrip, NovaBiomedical), the meter strip was filled (6x) with the respective volume, and the response of the meters (two devices) was documented (72 determinations/meter type). Correct response was defined as either an error message indicating incomplete filling or a correct reading (±20% compared with reference reading). Only five meters showed 100% correct responses [BGStar and iBGStar (both Sanofi), ACCU-CHEK Compact+ and ACCU-CHEK Mobile (both Roche Diagnostics), OneTouch Verio (LifeScan)]. The majority of the meters (17) had up to 10% incorrect reactions [predominantly incorrect readings with sufficient volume; Precision Xceed and Xtra, FreeStyle Lite, and Freedom Lite (all Abbott); GlucoCard+ and GlucoMen GM (both Menarini); Contour, Contour USB, and Breeze2 (all Bayer); OneTouch Ultra Easy, Ultra 2, and Ultra Smart (all LifeScan); Wellion Dialog and Premium (both MedTrust); FineTouch (Terumo); ACCU-CHEK Aviva (Roche); and GlucoTalk (Axis-Shield)]. Ten percent to 20% incorrect reactions were seen with OneTouch Vita (LifeScan), ACCU-CHEK Aviva Nano (Roche), OmniTest+ (BBraun), and AlphaChek+ (Berger Med). More than 20% incorrect reactions were obtained with Pura (Ypsomed), GlucoCard Meter and GlucoMen LX (both Menarini), Elite (Bayer), and MediTouch (Medisana). In summary, partial and incomplete blood filling of glucose meter strips is often associated with inaccurate reading. These findings underline the importance of appropriate patient education on this aspect of blood glucose self-monitoring. © 2013 Diabetes Technology Society.

City public service learns to speed read. [Computerized routing system for meter reading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aitken, E.L.

1994-02-01

City Public Service (CPS) of San Antonio, TX is a municipally owned utility that serves a densely populated 1,566 square miles in and around San Antonio. CPS's service area is divided into 21 meter reading districts, each of which is broken down into no more than 99 regular routes. Every day, a CPS employee reads one of the districts, following one or more routes. In 1991, CPS began using handheld computers to record reads for regular routes, which are stored on the devices themselves. In contrast, rereads and final reads occur at random throughout the service area. Because they changemore » every day, the process of creating routes that can be loaded onto a handheld device is difficult. Until recently, rereads and final reads were printed on paper orders, and route schedulers would spend close to two hours sorting the paper orders into routes. Meter readers would then hand-sequence the orders on their routes, often using a city map, before taking them into the field in stacks. When the meter readers returned, their completed orders had to be separated by type of reread, and then keyed into the mainframe computer before bill processing could begin. CPS's data processing department developed a computerized routing system of its own that saves time and labor, as well as paper. The system eliminates paper orders entirely, enabling schedulers to create reread and final read routes graphically on a PC. Information no longer needs to be keyed from hard copy, reducing the margin of error and streamlining bill processing by incorporating automated data transfer between systems.« less

Insert metering plates for gas turbine nozzles

DOEpatents

Burdgick, Steven S.; Itzel, Gary; Chopra, Sanjay; Abuaf, Nesim; Correia, Victor H.

2004-05-11

The invention comprises a metering plate which is assembled to an impingement insert for use in the nozzle of a gas turbine. The metering plate can have one or more metering holes and is used to balance the cooling flow within the nozzle. A metering plate with multiple holes reduces static pressure variations which result from the cooling airflow through the metering plate. The metering plate can be assembled to the insert before or after the insert is inserted into the nozzle.

Automatic ranging circuit for a digital panel meter

DOEpatents

Mueller, Theodore R.; Ross, Harley H.

1976-01-01

This invention relates to a range changing circuit that operates in conjunction with a digital panel meter of fixed sensitivity. The circuit decodes the output of the panel meter and uses that information to change the gain of an input amplifier to the panel meter in order to insure that the maximum number of significant figures is always displayed in the meter. The circuit monitors five conditions in the meter and responds to any of four combinations of these conditions by means of logic elements to carry out the function of the circuit.

Assessment of the Need for an Improved Inspection Program for Master Meter Systems

DOT National Transportation Integrated Search

2002-01-01

Gas master meter systems are small intrastate gas distribution systems providing natural gas purchased from local gas utilities (or, rarely, gas transmission systems) to consumers in connection with the rental, leasing, or management of real property...

40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Gas meter or flow instrumentation... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde... or flow instrumentation to determine flow through the particulate filters, methanol impingers and...

40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Gas meter or flow instrumentation... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde... or flow instrumentation to determine flow through the particulate filters, methanol impingers and...

40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Gas meter or flow instrumentation... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde... or flow instrumentation to determine flow through the particulate filters, methanol impingers and...

40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Gas meter or flow instrumentation... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde... or flow instrumentation to determine flow through the particulate filters, methanol impingers and...

40 CFR 86.120-94 - Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Gas meter or flow instrumentation... Procedures § 86.120-94 Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde... or flow instrumentation to determine flow through the particulate filters, methanol impingers and...

The Contributions of Vocabulary and Letter Writing Automaticity to Word Reading and Spelling for Kindergartners

ERIC Educational Resources Information Center

Kim, Young-Suk; Al Otaiba, Stephanie; Puranik, Cynthia; Folsom, Jessica Sidler; Gruelich, Luana

2014-01-01

In the present study we examined the relation between alphabet knowledge fluency (letter names and sounds) and letter writing automaticity, and unique relations of letter writing automaticity and semantic knowledge (i.e., vocabulary) to word reading and spelling over and above code-related skills such as phonological awareness and alphabet…

Development of a method to relate the moisture content of a building material to its water activity.

PubMed

Macher, J M; Mendell, M J; Chen, W; Kumagai, K

2017-05-01

Subjective indicators of building dampness consistently have been linked to health, but they are, at best, semi-quantitative, and objective and quantitative assessments of dampness are also needed to study dampness-related health effects. Investigators can readily and non-destructively measure the "moisture content" (MC) of building materials with hand-held moisture meters. However, MC does not indicate the amount of the water in a material that is available to microorganisms for growth, that is, the "water activity" (A w ). Unfortunately, A w has not been readily measurable in the field and is not relatable to MC unless previously determined experimentally, because for the same moisture meter reading, A w can differ across materials as well as during moisture adsorption vs desorption. To determine the A w s that correspond to MC levels, stable air relative humidities were generated in a glove box above saturated, aqueous salt solutions, and the A w of gypsum board and the relative humidity of the chamber air were tracked until they reached equilibrium. Strong correlations were observed between meter readings and gravimetrically determined MC (r=.91-1.00), among readings with three moisture meters (r=.87-.98), and between meter readings and gypsum board A w (r=.77-.99). © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Gas energy meter for inferential determination of thermophysical properties of a gas mixture at multiple states of the gas

DOEpatents

Morrow, Thomas B [San Antonio, TX; Kelner, Eric [San Antonio, TX; Owen, Thomas E [Helotes, TX

2008-07-08

A gas energy meter that acquires the data and performs the processing for an inferential determination of one or more gas properties, such as heating value, molecular weight, or density. The meter has a sensor module that acquires temperature, pressure, CO2, and speed of sound data. Data is acquired at two different states of the gas, which eliminates the need to determine the concentration of nitrogen in the gas. A processing module receives this data and uses it to perform a "two-state" inferential algorithm.

Automatic draft reading based on image processing

NASA Astrophysics Data System (ADS)

Tsujii, Takahiro; Yoshida, Hiromi; Iiguni, Youji

2016-10-01

In marine transportation, a draft survey is a means to determine the quantity of bulk cargo. Automatic draft reading based on computer image processing has been proposed. However, the conventional draft mark segmentation may fail when the video sequence has many other regions than draft marks and a hull, and the estimated waterline is inherently higher than the true one. To solve these problems, we propose an automatic draft reading method that uses morphological operations to detect draft marks and estimate the waterline for every frame with Canny edge detection and a robust estimation. Moreover, we emulate surveyors' draft reading process for getting the understanding of a shipper and a receiver. In an experiment in a towing tank, the draft reading error of the proposed method was <1 cm, showing the advantage of the proposed method. It is also shown that accurate draft reading has been achieved in a real-world scene.

Efficient Word Reading: Automaticity of Print-Related Skills Indexed by Rapid Automatized Naming through Cusp-Catastrophe Modeling

ERIC Educational Resources Information Center

Sideridis, Georgios D.; Simos, Panagiotis; Mouzaki, Angeliki; Stamovlasis, Dimitrios

2016-01-01

The study explored the moderating role of rapid automatized naming (RAN) in reading achievement through a cusp-catastrophe model grounded on nonlinear dynamic systems theory. Data were obtained from a community sample of 496 second through fourth graders who were followed longitudinally over 2 years and split into 2 random subsamples (validation…

49 CFR 192.1015 - What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart? 192.1015 Section 192.1015 Transportation Other... a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart? (a...

Tuning time-frequency methods for the detection of metered HF speech

NASA Astrophysics Data System (ADS)

Nelson, Douglas J.; Smith, Lawrence H.

2002-12-01

Speech is metered if the stresses occur at a nearly regular rate. Metered speech is common in poetry, and it can occur naturally in speech, if the speaker is spelling a word or reciting words or numbers from a list. In radio communications, the CQ request, call sign and other codes are frequently metered. In tactical communications and air traffic control, location, heading and identification codes may be metered. Moreover metering may be expected to survive even in HF communications, which are corrupted by noise, interference and mistuning. For this environment, speech recognition and conventional machine-based methods are not effective. We describe Time-Frequency methods which have been adapted successfully to the problem of mitigation of HF signal conditions and detection of metered speech. These methods are based on modeled time and frequency correlation properties of nearly harmonic functions. We derive these properties and demonstrate a performance gain over conventional correlation and spectral methods. Finally, in addressing the problem of HF single sideband (SSB) communications, the problems of carrier mistuning, interfering signals, such as manual Morse, and fast automatic gain control (AGC) must be addressed. We demonstrate simple methods which may be used to blindly mitigate mistuning and narrowband interference, and effectively invert the fast automatic gain function.

Automatic Focusing for a 675 GHz Imaging Radar with Target Standoff Distances from 14 to 34 Meters

NASA Technical Reports Server (NTRS)

Tang, Adrian; Cooper, Ken B.; Dengler, Robert J.; Llombart, Nuria; Siegel, Peter H.

2013-01-01

This paper dicusses the issue of limited focal depth for high-resolution imaging radar operating over a wide range of standoff distances. We describe a technique for automatically focusing a THz imaging radar system using translational optics combined with range estimation based on a reduced chirp bandwidth setting. The demonstarted focusing algorithm estimates the correct focal depth for desired targets in the field of view at unknown standoffs and in the presence of clutter to provide good imagery at 14 to 30 meters of standoff.

Combining non selective gas sensors on a mobile robot for identification and mapping of multiple chemical compounds.

PubMed

Bennetts, Victor Hernandez; Schaffernicht, Erik; Pomareda, Victor; Lilienthal, Achim J; Marco, Santiago; Trincavelli, Marco

2014-09-17

In this paper, we address the task of gas distribution modeling in scenarios where multiple heterogeneous compounds are present. Gas distribution modeling is particularly useful in emission monitoring applications where spatial representations of the gaseous patches can be used to identify emission hot spots. In realistic environments, the presence of multiple chemicals is expected and therefore, gas discrimination has to be incorporated in the modeling process. The approach presented in this work addresses the task of gas distribution modeling by combining different non selective gas sensors. Gas discrimination is addressed with an open sampling system, composed by an array of metal oxide sensors and a probabilistic algorithm tailored to uncontrolled environments. For each of the identified compounds, the mapping algorithm generates a calibrated gas distribution model using the classification uncertainty and the concentration readings acquired with a photo ionization detector. The meta parameters of the proposed modeling algorithm are automatically learned from the data. The approach was validated with a gas sensitive robot patrolling outdoor and indoor scenarios, where two different chemicals were released simultaneously. The experimental results show that the generated multi compound maps can be used to accurately predict the location of emitting gas sources.

Direct reading of charge multipliers with a self-triggering CMOS analog chip with 105 k pixels at 50 μm pitch

NASA Astrophysics Data System (ADS)

Bellazzini, R.; Spandre, G.; Minuti, M.; Baldini, L.; Brez, A.; Cavalca, F.; Latronico, L.; Omodei, N.; Massai, M. M.; Sgro', C.; Costa, E.; Soffitta, P.; Krummenacher, F.; de Oliveira, R.

2006-10-01

We report on a large area (15×15 mm2), high channel density (470 pixel/mm2), self-triggering CMOS analog chip that we have developed as a pixelized charge collecting electrode of a Micropattern Gas Detector. This device represents a big step forward both in terms of size and performance, and is in fact the last version of three generations of custom ASICs of increasing complexity. The top metal layer of the CMOS pixel array is patterned in a matrix of 105,600 hexagonal pixels with a 50 μm pitch. Each pixel is directly connected to the underlying full electronics chain which has been realized in the remaining five metal and single poly-silicon layers of a 0.18 μm VLSI technology. The chip, which has customizable self-triggering capabilities, also includes a signal pre-processing function for the automatic localization of the event coordinates. Thanks to these advances it is possible to significantly reduce the read-out time and the data volume by limiting the signal output only to those pixels belonging to the region of interest. In addition to the reduced read-out time and data volume, the very small pixel area and the use of a deep sub-micron CMOS technology has allowed bringing the noise down to 50 electrons ENC. Results from in depth tests of this device when coupled to a fine pitch (50 μm on a triangular pattern) Gas Electron Multiplier are presented. It was found that matching the read-out and gas amplification pitch allows getting optimal results. The experimental detector response to polarized and unpolarized X-ray radiation when working with two gas mixtures and two different photon energies is shown and the application of this detector for Astronomical X-ray Polarimetry is discussed. Results from a full Monte-Carlo simulation for several galactic and extragalactic astronomical sources are also reported.

Euro Data Bus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, H.E.; Hall, J.R. II; Schrock, C.B.

1995-12-31

With the disintegration of the Soviet Union and the opening of the Iron Curtain, a downsizing of the Defense Establishment in the West is occurring, causing industry to look for opportunities where technology used for military applications can be applied to meet former East Block countries. Among these requirements has been the urgent desire of the people in former East Block countries for access to Western media which had been denied them, and has led to numerous opportunities for the implementation of Cable Television (CATV) systems. In addition, there are also requirements for utility metering for electricity, gas, water, heat,more » etc. which had previously been provided to the population by the Government at little or no cost. EWT of Augsburg, Germany, previously a subcontractor to ASEC on military security system projects, who has a subsidiary, TSS, which is a prominent CATV systems house, requested ASEC to provide a system which can provide utility meter reading and other control and monitoring services utilizing CATV. Working with CableBus Systems Corporation, a CATV data communications supplier and various utility meter manufacturers, ASEC, as the System Integrator, has developed a utilities monitoring system. This system. in cooperation with EWT, is being marketed and sold in Europe as EURO DATA BUS. This paper describes EURO DATA BUS and its applications, as well as the actual system designs for two pilot applications. One system is oriented at Utility Meter Reading and Demand side Management primarily, but will also be used to demonstrate other system capabilities such as security and fire alarm monitoring, etc. The design is therefore quite straightforward and {open_quotes}standard{close_quotes}. The second system has more of an industrial orientation and involves the monitoring and load control for a Municipal Electric Utility. While well within the capabilities of the system to accomplish, a more customized design was required to meet these requirements.« less

ABISM: an interactive image quality assessment tool for adaptive optics instruments

NASA Astrophysics Data System (ADS)

Girard, Julien H.; Tourneboeuf, Martin

2016-07-01

ABISM (Automatic Background Interactive Strehl Meter) is a interactive tool to evaluate the image quality of astronomical images. It works on seeing-limited point spread functions (PSF) but was developed in particular for diffraction-limited PSF produced by adaptive optics (AO) systems. In the VLT service mode (SM) operations framework, ABISM is designed to help support astronomers or telescope and instruments operators (TIOs) to quickly measure the Strehl ratio (SR) during or right after an observing block (OB) to evaluate whether it meets the requirements/predictions or whether is has to be repeated and will remain in the SM queue. It's a Python-based tool with a graphical user interface (GUI) that can be used with little AO knowledge. The night astronomer (NA) or Telescope and Instrument Operator (TIO) can launch ABISM in one click and the program is able to read keywords from the FITS header to avoid mistakes. A significant effort was also put to make ABISM as robust (and forgiven) with a high rate of repeatability. As a matter of fact, ABISM is able to automatically correct for bad pixels, eliminate stellar neighbours and estimate/fit properly the background, etc.

Phonological Awareness and Rapid Automatized Naming Predicting Early Development in Reading and Spelling: Results from a Cross-Linguistic Longitudinal Study

ERIC Educational Resources Information Center

Furnes, Bjarte; Samuelsson, Stefan

2011-01-01

In this study, the relationship between latent constructs of phonological awareness (PA) and rapid automatized naming (RAN) was investigated and related to later measures of reading and spelling in children learning to read in different alphabetic writing systems (i.e., Norwegian/Swedish vs. English). 750 U.S./Australian children and 230…

Are self-reported telemonitored blood pressure readings affected by end-digit preference: a prospective cohort study in Scotland.

PubMed

Parker, Richard A; Paterson, Mary; Padfield, Paul; Pinnock, Hilary; Hanley, Janet; Hammersley, Vicky S; Steventon, Adam; McKinstry, Brian

2018-01-31

Simple forms of blood pressure (BP) telemonitoring require patients to text readings to central servers creating an opportunity for both entry error and manipulation. We wished to determine if there was an apparent preference for particular end digits and entries which were just below target BPs which might suggest evidence of data manipulation. Prospective cohort study SETTING: 37 socioeconomically diverse primary care practices from South East Scotland. Patients were recruited with hypertension to a telemonitoring service in which patients submitted home BP readings by manually transcribing the measurements into text messages for transmission ('patient-texted system'). These readings were compared with those from primary care patients with uncontrolled hypertension using a system in which readings were automatically transmitted, eliminating the possibility of manipulation of values ('automatic-transmission system'). A generalised estimating equations method was used to compare BP readings between the patient-texted and automatic-transmission systems, while taking into account clustering of readings within patients. A total of 44 150 BP readings were analysed on 1068 patients using the patient-texted system compared with 20 705 readings on 199 patients using the automatic-transmission system. Compared with the automatic-transmission data, the patient-texted data showed a significantly higher proportion of occurrences of both systolic and diastolic BP having a zero end digit (OR 2.1, 95% CI 1.7 to 2.6) although incidence was <2% of readings. Similarly, there was a preference for systolic 134 and diastolic 84 (the threshold for alerts was 135/85) (134 systolic BP OR 1.5, 95% CI 1.3 to 1.8; 84 diastolic BP OR 1.5, 95% CI 1.3 to 1.9). End-digit preference for zero numbers and specific-value preference for readings just below the alert threshold exist among patients in self-reporting their BP using telemonitoring. However, the proportion of readings affected is small and unlikely to be clinically important. ISRCTN72614272; Post-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Utility deregulation and AMR technology. [Automated Meter Reading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, G.

1991-06-15

This article reviews the effects of deregulation on other utilities and services and examines how the electric utilities can avoid the worst of these effects and capitalize of the best aspects of competition in achieving marketing excellence. The article presents deregulation as a customer service and underscores the need for utilities to learn to compete aggressively and intelligently and provide additional services available through technology such as automated meter reading.

Dew-point measurements at high water vapour pressure

NASA Astrophysics Data System (ADS)

Lomperski, S.; Dreier, J.

1996-05-01

A dew-point meter capable of measuring humidity at high vapour pressure and high temperature has been constructed and tested. Humidity measurements in pure steam were made over the temperature range 100 - 1500957-0233/7/5/003/img1C and a vapour pressure range of 1 - 4 bar. The dew-point meter performance was assessed by comparing measurements with a pressure transmitter and agreement between the two was within 0957-0233/7/5/003/img2% relative humidity. Humidity measurements in steam - air mixtures were also made and the dew-point meter readings were compared to those of a zirconia oxygen sensor. For these tests the dew-point meter readings were generally within 0957-0233/7/5/003/img2% relative humidity of the oxygen sensor measurements.

49 CFR 192.1005 - What must a gas distribution operator (other than a master meter or small LPG operator) do to...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false What must a gas distribution operator (other than a master meter or small LPG operator) do to implement this subpart? 192.1005 Section 192.1005...) § 192.1005 What must a gas distribution operator (other than a master meter or small LPG operator) do to...

49 CFR 192.1005 - What must a gas distribution operator (other than a master meter or small LPG operator) do to...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false What must a gas distribution operator (other than a master meter or small LPG operator) do to implement this subpart? 192.1005 Section 192.1005...) § 192.1005 What must a gas distribution operator (other than a master meter or small LPG operator) do to...

49 CFR 192.1005 - What must a gas distribution operator (other than a master meter or small LPG operator) do to...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false What must a gas distribution operator (other than a master meter or small LPG operator) do to implement this subpart? 192.1005 Section 192.1005...) § 192.1005 What must a gas distribution operator (other than a master meter or small LPG operator) do to...

49 CFR 192.1005 - What must a gas distribution operator (other than a master meter or small LPG operator) do to...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false What must a gas distribution operator (other than a master meter or small LPG operator) do to implement this subpart? 192.1005 Section 192.1005...) § 192.1005 What must a gas distribution operator (other than a master meter or small LPG operator) do to...

49 CFR 192.1015 - What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false What must a master meter or small liquefied... a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart? (a) General. No later than August 2, 2011 the operator of a master meter system or a small LPG operator must...

49 CFR 192.1015 - What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false What must a master meter or small liquefied... a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart? (a) General. No later than August 2, 2011 the operator of a master meter system or a small LPG operator must...

49 CFR 192.1015 - What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false What must a master meter or small liquefied... a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart? (a) General. No later than August 2, 2011 the operator of a master meter system or a small LPG operator must...

Reservoir controls on the occurrence and production of gas hydrates in nature

USGS Publications Warehouse

Collett, Timothy Scott

2014-01-01

modeling has shown that concentrated gas hydrate occurrences in sand reservoirs are conducive to existing well-based production technologies. The resource potential of gas hydrate accumulations in sand-dominated reservoirs have been assessed for several polar terrestrial basins. In 1995, the U.S. Geological Survey (USGS) assigned an in-place resource of 16.7 trillion cubic meters of gas for hydrates in sand-dominated reservoirs on the Alaska North Slope. In a more recent assessment, the USGS indicated that there are about 2.42 trillion cubic meters of technically recoverable gas resources within concentrated, sand-dominated, gas hydrate accumulations in northern Alaska. Estimates of the amount of in-place gas in the sand dominated gas hydrate accumulations of the Mackenzie Delta Beaufort Sea region of the Canadian arctic range from 1.0 to 10 trillion cubic meters of gas. Another prospective gas hydrate resources are those of moderate-to-high concentrations within sandstone reservoirs in marine environments. In 2008, the Bureau of Ocean Energy Management estimated that the Gulf of Mexico contains about 190 trillion cubic meters of gas in highly concentrated hydrate accumulations within sand reservoirs. In 2008, the Japan Oil, Gas and Metals National Corporation reported on a resource assessment of gas hydrates in which they estimated that the volume of gas within the hydrates of the eastern Nankai Trough at about 1.1 trillion cubic meters, with about half concentrated in sand reservoirs. Because conventional production technologies favor sand-dominated gas hydrate reservoirs, sand reservoirs are considered to be the most viable economic target for gas hydrate production and will be the prime focus of most future gas hydrate exploration and development projects.

Performance of the 0.3-meter transonic cryogenic tunnel with air, nitrogen, and sulfur hexafluoride media under closed loop automatic control

NASA Technical Reports Server (NTRS)

Balakrishna, S.; Kilgore, W. Allen

1995-01-01

The NASA Langley 0.3-m Transonic Cryogenic Tunnel was modified in 1994, to operate with any one of the three test gas media viz., air, cryogenic nitrogen gas, or sulfur hexafluoride gas. This document provides the initial test results with respect to the tunnel performance and tunnel control, as a part of the commissioning activities on the microcomputer based controller. The tunnel can provide precise and stable control of temperature to less than or equal to +/- 0.3 K in the range 80-320 K in cyro mode or 300-320 K in air/SF6 mode, pressure to +/- 0.01 psia in the range 15-88 psia and Mach number to +/- O.0015 in the range 0.150 to transonic Mach numbers up to 1.000. A new heat exchanger has been included in the tunnel circuit and is performing adequately. The tunnel airfoil testing benefits considerably by precise control of tunnel states and helps in generating high quality aerodynamic test data from the 0.3-m TCT.

Investigation of natural gas theft by magnetic remanence mapping.

PubMed

Dobó, Zsolt; Kovács, Helga; Tóth, Pál; Palotás, Árpád B

2014-12-01

Natural gas theft causes major losses in the energy industry in Hungary. Among the non-technical losses occurring in natural gas networks, fraudulent residential consumption is one of the main factors. Up to 2014, gas meters that are most widely used in residential monitoring are manufactured with ferromagnetic moving components, which makes it possible to alter or disrupt the operation of the meters non-intrusively by placing permanent magnets on the casing of the meters. Magnetic remanence mapping was used to investigate a sample of 80 recalled residential meters and detect potentially fraudulent activity. 10% of the meters were found suspect by magnetic remanence measurement, of which 50% were confirmed to be potentially hijacked by further mechanical investigation. The details of the technique are described in this paper, along with experimental results and the discussion of the analysis of the real-world samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Multiphase flowmeter successfully measures three-phase flow at extremely high gas-volume fractions -- Gulf of Suez, Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leggett, R.B.; Borling, D.C.; Powers, B.S.

1998-02-01

A multiphase flowmeter (MPFM) installed in offshore Egypt has accurately measured three-phase flow in extremely gassy flow conditions. The meter is completely nonintrusive, with no moving parts, requires no flow mixing before measurement, and has no bypass loop to remove gas before multiphase measurement. Flow regimes observed during the field test of this meter ranged from severe slugging to annular flow caused by the dynamics of gas-lift gas in the production stream. Average gas-volume fraction ranged from 93 to 98% during tests conducted on seven wells. The meter was installed in the Gulf of Suez on a well protector platformmore » in the Gulf of Suez Petroleum Co. (Gupco) October field, and was placed in series with a test separator located on a nearby production platform. Wells were individually tested with flow conditions ranging from 1,300 to 4,700 B/D fluid, 2.4 to 3.9 MMscf/D of gas, and water cuts from 1 to 52%. The meter is capable of measuring water cuts up to 100%. Production was routed through both the MPFM and the test separator simultaneously as wells flowed with the assistance of gas-lift gas. The MPFM measured gas and liquid rates to within {+-} 10% of test-separator reference measurement flow rates, and accomplished this at gas-volume fractions from 93 to 96%. At higher gas-volume fractions up to 98%, accuracy deteriorated but the meter continued to provide repeatable results.« less

Low-temperature methyl bromide fumigation of emerald ash borer (Coleoptera: Buprestidae) in ash logs.

PubMed

Barak, Alan V; Elder, Peggy; Fraser, Ivich

2011-02-01

Ash (Fraxinus spp.) logs, infested with fully developed, cold-acclimated larval and prepupal emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), were fumigated with methyl bromide (MeBr) at 4.4 and 10.0 degrees C for 24 h. Concentrations X time dosages of MeBr obtained were 1579 and 1273 g-h/m3 (24-h exposure) at 4.4 and 10.0 degrees C after applied doses of 112 and 96 g/m3, respectively. MeBr concentrations were simultaneously measured with a ContainIR infrared monitor and Fumiscope thermal conductivity meter calibrated for MeBr to measure the effect of CO2 on Fumiscope concentration readings compared with the infrared (IR) instrument. The presence of CO2 caused false high MeBr readings. With the thermal conductivity meter, CO2 measured 11.36 g/m3 MeBr per 1% CO2 in clean air, whereas the gas-specific infrared ContainIR instrument measured 9.55% CO2 as 4.2 g/m3 MeBr (0.44 g/m3 per 1% CO2). The IR instrument was 0.4% as sensitive to CO2 as the thermal conductivity meter. After aeration, fumigated and control logs were held for 8 wk to capture emerging beetles. No A. planipennis adults emerged from any of the fumigated logs, whereas 262 emerged from control logs (139 and 123/m2 at 4.4 and 10.0 degrees C, respectively). An effective fumigation dose and minimum periodic MeBr concentrations are proposed. The use of a CO2 scrubber in conjunction with nonspecific thermal conductivity instruments is necessary to more accurately measure MeBr concentrations.

Word reading practice reduces Stroop interference in children.

PubMed

Protopapas, Athanassios; Vlahou, Eleni L; Moirou, Despoina; Ziaka, Laoura

2014-05-01

Stroop interference is thought to index reading automaticity and is expected to increase with reading practice and to decrease with improved color naming. We investigated the effects of practice in word reading and color naming on interference in 92 adults and 109 children in Grades 4-5. For children, interference was reduced after reading practice with color words. In neither group was interference affected by practice in color naming of neutral stimuli. These findings are consistent with a direct negative relationship between reading ability and interference and challenge the automaticity account in favor of a blocking mechanism whereby interference is determined by the delay to inhibit the reading response rather than by the efficiency of color naming. Copyright © 2014 Elsevier B.V. All rights reserved.

Response variability in rapid automatized naming predicts reading comprehension

PubMed Central

Li, James J.; Cutting, Laurie E.; Ryan, Matthew; Zilioli, Monica; Denckla, Martha B.; Mahone, E. Mark

2009-01-01

A total of 37 children ages 8 to 14 years, screened for word-reading difficulties (23 with attention-deficit/hyperactivity disorder, ADHD; 14 controls) completed oral reading and rapid automatized naming (RAN) tests. RAN trials were segmented into pause and articulation time and intraindividual variability. There were no group differences on reading or RAN variables. Color- and letter-naming pause times and number-naming articulation time were significant predictors of reading fluency. In contrast, number and letter pause variability were predictors of comprehension. Results support analysis of subcomponents of RAN and add to literature emphasizing intraindividual variability as a marker for response preparation, which has relevance to reading comprehension. PMID:19221923

DEVELOPMENT OF A LOW-COST INFERENTIAL NATURAL GAS ENERGY FLOW RATE PROTOTYPE RETROFIT MODULE

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Kelner; T.E. Owen; D.L. George

2004-03-01

In 1998, Southwest Research Institute{reg_sign} began a multi-year project co-funded by the Gas Research Institute (GRI) and the U.S. Department of Energy. The project goal is to develop a working prototype instrument module for natural gas energy measurement. The module will be used to retrofit a natural gas custody transfer flow meter for energy measurement, at a cost an order of magnitude lower than a gas chromatograph. Development and evaluation of the prototype retrofit natural gas energy flow meter in 2000-2001 included: (1) evaluation of the inferential gas energy analysis algorithm using supplemental gas databases and anticipated worst-case gas mixtures;more » (2) identification and feasibility review of potential sensing technologies for nitrogen diluent content; (3) experimental performance evaluation of infrared absorption sensors for carbon dioxide diluent content; and (4) procurement of a custom ultrasonic transducer and redesign of the ultrasonic pulse reflection correlation sensor for precision speed-of-sound measurements. A prototype energy meter module containing improved carbon dioxide and speed-of-sound sensors was constructed and tested in the GRI Metering Research Facility at SwRI. Performance of this module using transmission-quality natural gas and gas containing supplemental carbon dioxide up to 9 mol% resulted in gas energy determinations well within the inferential algorithm worst-case tolerance of {+-}2.4 Btu/scf (nitrogen diluent gas measured by gas chromatograph). A two-week field test was performed at a gas-fired power plant to evaluate the inferential algorithm and the data acquisition requirements needed to adapt the prototype energy meter module to practical field site conditions.« less

Decomposing the relation between Rapid Automatized Naming (RAN) and reading ability.

PubMed

Arnell, Karen M; Joanisse, Marc F; Klein, Raymond M; Busseri, Michael A; Tannock, Rosemary

2009-09-01

The Rapid Automatized Naming (RAN) test involves rapidly naming sequences of items presented in a visual array. RAN has generated considerable interest because RAN performance predicts reading achievement. This study sought to determine what elements of RAN are responsible for the shared variance between RAN and reading performance using a series of cognitive tasks and a latent variable modelling approach. Participants performed RAN measures, a test of reading speed and comprehension, and six tasks, which tapped various hypothesised components of the RAN. RAN shared 10% of the variance with reading comprehension and 17% with reading rate. Together, the decomposition tasks explained 52% and 39% of the variance shared between RAN and reading comprehension and between RAN and reading rate, respectively. Significant predictors suggested that working memory encoding underlies part of the relationship between RAN and reading ability.

When the Eyes No Longer Lead: Familiarity and Length Effects on Eye-Voice Span

PubMed Central

Silva, Susana; Reis, Alexandra; Casaca, Luís; Petersson, Karl M.; Faísca, Luís

2016-01-01

During oral reading, the eyes tend to be ahead of the voice (eye-voice span, EVS). It has been hypothesized that the extent to which this happens depends on the automaticity of reading processes, namely on the speed of print-to-sound conversion. We tested whether EVS is affected by another automaticity component – immunity from interference. To that end, we manipulated word familiarity (high-frequency, low-frequency, and pseudowords, PW) and word length as proxies of immunity from interference, and we used linear mixed effects models to measure the effects of both variables on the time interval at which readers do parallel processing by gazing at word N + 1 while not having articulated word N yet (offset EVS). Parallel processing was enhanced by automaticity, as shown by familiarity × length interactions on offset EVS, and it was impeded by lack of automaticity, as shown by the transformation of offset EVS into voice-eye span (voice ahead of the offset of the eyes) in PWs. The relation between parallel processing and automaticity was strengthened by the fact that offset EVS predicted reading velocity. Our findings contribute to understand how the offset EVS, an index that is obtained in oral reading, may tap into different components of automaticity that underlie reading ability, oral or silent. In addition, we compared the duration of the offset EVS with the average reference duration of stages in word production, and we saw that the offset EVS may accommodate for more than the articulatory programming stage of word N. PMID:27853446

Retrieval, automaticity, vocabulary elaboration, orthography (RAVE-O): a comprehensive, fluency-based reading intervention program.

PubMed

Wolf, M; Miller, L; Donnelly, K

2000-01-01

The most important implication of the double-deficit hypothesis (Wolf & Bowers, in this issue) concerns a new emphasis on fluency and automaticity in intervention for children with developmental reading disabilities. The RAVE-O (Retrieval, Automaticity, Vocabulary Elaboration, Orthography) program is an experimental, fluency-based approach to reading intervention that is designed to accompany a phonological analysis program. In an effort to address multiple possible sources of dysfluency in readers with disabilities, the program involves comprehensive emphases both on fluency in word attack, word identification, and comprehension and on automaticity in underlying componential processes (e.g., phonological, orthographic, semantic, and lexical retrieval skills). The goals, theoretical principles, and applied activities of the RAVE-O curriculum are described with particular stress on facilitating the development of rapid orthographic pattern recognition and on changing children's attitudes toward language.

Malgorzata Kasperska Henryk Bunka

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The MarCo Engineering Company Ltd. has its registered seat at Gdynia and was established in 1990. We are the exclusive representative for Poland of the world`s renowned manufacturers of heat distribution network products; Through six subsidiaries (Gdynia, Warsaw, Wroclaw, Cracow, Gliwice and Lublin) and our dealers` network all over Poland the following products and services are offered: (1) automatic control systems for heating and air conditioning; (2) a supervisory remote control system for heat distribution centers; (3) compensating devices for central heating and household hot water installations; (4) radiator thermostatic valves; (5) Meinecke water meters; (6) thermal energy counters; (6)more » a remote calorimeter data reading system SIOX; (7) an electronic central heating costs sharing system - GT-15; (8) compact thermal stations; and (9) compact and pipe exchangers. The modern, high standard devices offered have achieved much success on the Polish market.« less

Preservation of memory-based automaticity in reading for older adults.

PubMed

Rawson, Katherine A; Touron, Dayna R

2015-12-01

Concerning age-related effects on cognitive skill acquisition, the modal finding is that older adults do not benefit from practice to the same extent as younger adults in tasks that afford a shift from slower algorithmic processing to faster memory-based processing. In contrast, Rawson and Touron (2009) demonstrated a relatively rapid shift to memory-based processing in the context of a reading task. The current research extended beyond this initial study to provide more definitive evidence for relative preservation of memory-based automaticity in reading tasks for older adults. Younger and older adults read short stories containing unfamiliar noun phrases (e.g., skunk mud) followed by disambiguating information indicating the combination's meaning (either the normatively dominant meaning or an alternative subordinate meaning). Stories were repeated across practice blocks, and then the noun phrases were presented in novel sentence frames in a transfer task. Both age groups shifted from computation to retrieval after relatively few practice trials (as evidenced by convergence of reading times for dominant and subordinate items). Most important, both age groups showed strong evidence for memory-based processing of the noun phrases in the transfer task. In contrast, older adults showed minimal shifting to retrieval in an alphabet arithmetic task, indicating that the preservation of memory-based automaticity in reading was task-specific. Discussion focuses on important implications for theories of memory-based automaticity in general and for specific theoretical accounts of age effects on memory-based automaticity, as well as fruitful directions for future research. (c) 2015 APA, all rights reserved).

47 CFR 73.664 - Determining operating power.

Code of Federal Regulations, 2011 CFR

2011-10-01

... power to within an accuracy of ±5% of the power indicated by the full scale reading of the electrical... frequency amplifier stage and the transmission line meter are to be read and compared with similar readings taken with the dummy load replaced by the antenna. These readings must be in substantial agreement. (3...

47 CFR 73.664 - Determining operating power.

Code of Federal Regulations, 2012 CFR

2012-10-01

... power to within an accuracy of ±5% of the power indicated by the full scale reading of the electrical... frequency amplifier stage and the transmission line meter are to be read and compared with similar readings taken with the dummy load replaced by the antenna. These readings must be in substantial agreement. (3...

47 CFR 73.664 - Determining operating power.

Code of Federal Regulations, 2013 CFR

2013-10-01

... power to within an accuracy of ±5% of the power indicated by the full scale reading of the electrical... frequency amplifier stage and the transmission line meter are to be read and compared with similar readings taken with the dummy load replaced by the antenna. These readings must be in substantial agreement. (3...

47 CFR 73.664 - Determining operating power.

Code of Federal Regulations, 2014 CFR

2014-10-01

... power to within an accuracy of ±5% of the power indicated by the full scale reading of the electrical... frequency amplifier stage and the transmission line meter are to be read and compared with similar readings taken with the dummy load replaced by the antenna. These readings must be in substantial agreement. (3...

46 CFR 174.015 - Intact stability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... foot-degrees (4.57 meter-degrees) for ocean and Great Lakes winter service; and (2) 10 foot-degrees (3.05 meter-degrees) for lakes, bays, sounds, and Great Lakes summer service. (b) For the purpose of... centerline and waterline in calm water to the first opening that does not close watertight automatically. ...

LOSS OF BLOOD AT OPERATION—A Method for Continuous Measurement

PubMed Central

Borden, Fred W.

1957-01-01

A method for continuous measurement of surgical blood loss has been devised and has been used clinically in some 400 cases. The method combines volumetric measure of the suction loss and gravimetric measure of the sponge loss. The volumetric device automatically deducts the volume of rinse water used and thus measures the amount of blood collected in a metering cylinder. The suction loss scale shows continuously the amount of blood in the metering cylinder. The gravimetric device requires counting sponges into the weighing pan, and turning a dial scale to deduct the initial weight of the sponges. The volume of blood in the sponges is then read directly on the dial scale. Use of the instrument, which is under the supervision of the anesthesiologist, adds about two minutes per hour to the time normally required for counting the sponges; and about three minutes per hour is required for tending the volumetric instrument. In clinical use, knowing constantly the amount of blood loss permits the starting of transfusion before serious deficit develops, and then maintaining the patient's blood volume at a predetermined optimum level. In some 400 cases the continuous measurement of the blood loss served as a reliable guide for carrying out the loss-replacement plan within close limits of accuracy. ImagesFigure 2.p97-a PMID:13446754

Component Processes Subserving Rapid Automatized Naming in Dyslexic and Non-Dyslexic Readers

ERIC Educational Resources Information Center

Araujo, Susana; Inacio, Filomena; Francisco, Ana; Faisca, Luis; Petersson, Karl Magnus; Reis, Alexandra

2011-01-01

The current study investigated which time components of rapid automatized naming (RAN) predict group differences between dyslexic and non-dyslexic readers (matched for age and reading level), and how these components relate to different reading measures. Subjects performed two RAN tasks (letters and objects), and data were analyzed through a…

The Influence of Inattention on Rapid Automatized Naming and Reading Skills

ERIC Educational Resources Information Center

Pham, Andy V.

2010-01-01

The purpose of this study is to determine how behavioral symptoms of inattention predict rapid automatized naming (RAN) performance and reading skills in typically developing children. Participants included 104 third- and fourth-grade children from different elementary schools in mid-Michigan. RAN performance was assessed using the four Rapid…

[Developmental changes of rapid automatized naming and Hiragana reading of Japanese in elementary-school children].

PubMed

Kobayashi, Tomoka; Inagaki, Masumi; Gunji, Atsuko; Yatabe, Kiyomi; Kita, Yosuke; Kaga, Makiko; Gotoh, Takaaki; Koike, Toshihide

2011-11-01

Two hundred and seven Japanese elementary school children aged from 6 (Grade 1) to 12 (Grade 6) years old were tested for their abilities to name numbers and pictured objects along with reading Hiragana characters and words. These children all showed typical development and their classroom teachers judged that they were not having any problems with reading or writing. The children were randomly divided into two groups, the first group was assigned to two naming tasks;the rapid automatized naming (RAN) of "numbers" and "pictured objects," the second group was assigned to two rapid alternative stimulus (RAS) naming tasks using numbers and pictured objects. All children were asked to perform two reading tasks that were written in Hiragana script: single mora reading task and four syllable word reading task. The total articulation time for naming and reading and performance in terms of accuracy were measured for each task. Developmental changes in these variables were evaluated. The articulation time was significantly longer for the first graders, and it gradually shortened as they moved through to the upper grades in all tasks. The articulation time reached a plateau in the 5th grade for the number naming, while gradual change continued after drastic change in the lower grades for the pictured object naming. The articulation times for the single mora reading and RAN of numbers correlated strongly. The articulation time for the RAS naming was significantly longer compared to that for the RAN, though there were very few errors. The RAS naming showed the highest correlation with the four syllable word reading. This study demonstrated that the performance in rapid automatized naming of numbers and pictures were closely related with performance on reading tasks. Thus Japanese children with reading disorders such as developmental dyslexia should also be evaluated for rapid automatized naming.

46 CFR 162.050-27 - Oil content meter: Approval tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with water for 15 minutes and then with mixtures in the following concentrations: 15 ppm, 50 ppm, 100 ppm, and each additional concentration, in increments of 50 ppm up to the highest oil concentration that can be read on the meter. Each mixture is fed to the meter in the order listed in Table 162.050-27...

Evaluation of a rapid breath hydrogen analyzer for clinical studies of carbohydrate absorption.

PubMed

Solomons, N W; Hamilton, L H; Christman, N T; Rothman, D

1983-05-01

A second-generation gas chromatograph for the analysis of H2 in expired air has been developed. It incorporates a solid-state detector with high sensitivity for H2 and has a small, internal pump which supplies air as the carrier gas, thus eliminating the need for a large tank of compressed gas for the carrier. A reference gas of known H2 concentration is, of course, still required. The entire system weighs 6.0 kg and is completely portable, requiring only 120 V electric current for use. The instrument has a mean intersample interval of less than 2 min, with H2 concentration registered on a digital display. The output has a track-hold feature which permits the output, in parts per million H2, to be retained by the meter so the reading can be verified. The chromatogram can also be recorded on a conventional analog strip-chart recorder. The sensitivity and precision are superior to those of a thermal conductivity H2 gas chromatograph. Moreover, the rapid response time encourages frequent calibration checks with the reference gas. This analyzer offers significant advantages over previous H2-measuring systems for breath-analysis tests used both for diagnostic clinical practice and for field studies of nutritional assessment.

The Contributions of Oral and Silent Reading Fluency to Reading Comprehension

ERIC Educational Resources Information Center

Price, Katherine W.; Meisinger, Elizabeth B.; Louwerse, Max M.; D'Mello, Sidney

2016-01-01

Silent reading fluency has received limited attention in the school-based literatures across the past decade. We fill this gap by examining both oral and silent reading fluency and their relation to overall abilities in reading comprehension in fourth-grade students. Lower-level reading skills (word reading, rapid automatic naming) and vocabulary…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bosio, J.; Wilcox, P.; Sembsmoen, O.

A joint-venture, high-pressure, large-flow-rate facility to test, qualify, and research new natural-gas metering systems has been built by Den Norske Stats Oljeselskap A.S. (Statoil) and Total Marine Norsk A.S. Located near Haugesund in the Stavanger area, the lab, designated the Karsto Metering and Technology Laboratory, or K-Lab, is adjacent to Norway's first natural-gas-processing plant. It receives natural gas from across the Norwegian Trench from the Statfjord complex and after processing it sends it on to Emden, West Germany. The gas, which is produced in the North Sea, is transported to United Kingdom and the European continent through a high-pressure pipelinemore » network. The importance of gas-metering technology has been emphasized by oil and gas companies as well as by national regulatory authorities.« less

Construction and testing of a simple and economical soil greenhouse gas automatic sampler

USGS Publications Warehouse

Ginting, D.; Arnold, S.L.; Arnold, N.S.; Tubbs, R.S.

2007-01-01

Quantification of soil greenhouse gas emissions requires considerable sampling to account for spatial and/or temporal variation. With manual sampling, additional personnel are often not available to sample multiple sites within a narrow time interval. The objectives were to construct an automatic gas sampler and to compare the accuracy and precision of automatic versus manual sampling. The automatic sampler was tested with carbon dioxide (CO2) fluxes that mimicked the range of CO2 fluxes during a typical corn-growing season in eastern Nebraska. Gas samples were drawn from the chamber at 0, 5, and 10 min manually and with the automatic sampler. The three samples drawn with the automatic sampler were transferred to pre-vacuumed vials after 1 h; thus the samples in syringe barrels stayed connected with the increasing CO2 concentration in the chamber. The automatic sampler sustains accuracy and precision in greenhouse gas sampling while improving time efficiency and reducing labor stress. Copyright ?? Taylor & Francis Group, LLC.

The influence of inattention and rapid automatized naming on reading performance.

PubMed

Pham, Andy V; Fine, Jodene Goldenring; Semrud-Clikeman, Margaret

2011-04-01

The current study examined the relation between attention, rapid automatized naming (RAN), and reading fluency among typically developing children. A total of 104 third- and fourth-grade children (8-11 years of age) completed RAN measures consisting of four stimuli (letter, digit, color, and object) and an oral reading fluency measure from the Gray Oral Reading Test-Fourth Edition. Correlational and hierarchical regression analyses revealed that all four RAN stimuli, particularly letter RAN, were significant predictors of reading fluency. Additionally, parent and teacher ratings of inattention from the Swanson, Nolan and Pelham-Version Four rating scale predicted RAN after controlling for gender, working memory, and estimated IQ. Further analyses indicated that RAN performance mediated the relation between inattention and reading fluency. Results support the need to consider attentional variables when assessing reading performance, even among typically developing children.

Developmental, Component-Based Model of Reading Fluency: An Investigation of Predictors of Word-Reading Fluency, Text-Reading Fluency, and Reading Comprehension

ERIC Educational Resources Information Center

Kim, Young-Suk Grace

2015-01-01

The primary goal was to expand our understanding of text-reading fluency (efficiency or automaticity): how its relation to other constructs (e.g., word reading fluency, reading comprehension) changes over time and how it is different from word-reading fluency and reading comprehension. The study examined (a) developmentally changing relations…

Developmental, Component-Based Model of Reading Fluency: An Investigation of Predictors of Word-Reading Fluency, Text-Reading Fluency, and Reading Comprehension

ERIC Educational Resources Information Center

Kim, Young-Suk Grace

2015-01-01

The primary goal was to expand our understanding of text-reading fluency (efficiency or automaticity): how its relation to other constructs (e.g., word-reading fluency, reading comprehension) changes over time and how it is different from word-reading fluency and reading comprehension. The study examined (a) developmentally changing relations…

Accuracy of blood-glucose measurements using glucose meters and arterial blood gas analyzers in critically ill adult patients: systematic review

PubMed Central

2013-01-01

Introduction Glucose control to prevent both hyperglycemia and hypoglycemia is important in an intensive care unit. Arterial blood gas analyzers and glucose meters are commonly used to measure blood-glucose concentration in an intensive care unit; however, their accuracies are still unclear. Methods We performed a systematic literature search (January 1, 2001, to August 31, 2012) to find clinical studies comparing blood-glucose values measured with glucose meters and/or arterial blood gas analyzers with those simultaneously measured with a central laboratory machine in critically ill adult patients. Results We reviewed 879 articles and found 21 studies in which the accuracy of blood-glucose monitoring by arterial blood gas analyzers and/or glucometers by using central laboratory methods as references was assessed in critically ill adult patients. Of those 21 studies, 11 studies in which International Organization for Standardization criteria, error-grid method, or percentage of values within 20% of the error of a reference were used were selected for evaluation. The accuracy of blood-glucose measurements by arterial blood gas analyzers and glucose meters by using arterial blood was significantly higher than that of measurements with glucose meters by using capillary blood (odds ratios for error: 0.04, P < 0.001; and 0.36, P < 0.001). The accuracy of blood-glucose measurements with arterial blood gas analyzers tended to be higher than that of measurements with glucose meters by using arterial blood (P = 0.20). In the hypoglycemic range (defined as < 81 mg/dl), the incidence of errors using these devices was higher than that in the nonhypoglycemic range (odds ratios for error: arterial blood gas analyzers, 1.86, P = 0.15; glucose meters with capillary blood, 1.84, P = 0.03; glucose meters with arterial blood, 2.33, P = 0.02). Unstable hemodynamics (edema and use of a vasopressor) and use of insulin were associated with increased error of blood glucose monitoring with glucose meters. Conclusions Our literature review showed that the accuracy of blood-glucose measurements with arterial blood gas analyzers was significantly higher than that of measurements with glucose meters by using capillary blood and tended to be higher than that of measurements with glucose meters by using arterial blood. These results should be interpreted with caution because of the large variation of accuracy among devices. Because blood-glucose monitoring was less accurate within or near the hypoglycemic range, especially in patients with unstable hemodynamics or receiving insulin infusion, we should be aware that current blood glucose-monitoring technology has not reached a high enough degree of accuracy and reliability to lead to appropriate glucose control in critically ill patients. PMID:23506841

Stroop interference associated with efficient reading fluency and prelexical orthographic processing.

PubMed

Mano, Quintino R; Williamson, Brady J; Pae, Hye K; Osmon, David C

2016-01-01

The Stroop Color-Word Test involves a dynamic interplay between reading and executive functioning that elicits intuitions of word reading automaticity. One such intuition is that strong reading skills (i.e., more automatized word reading) play a disruptive role within the test, contributing to Stroop interference. However, evidence has accumulated that challenges this intuition. The present study examined associations among Stroop interference, reading skills (i.e., isolated word identification, grapheme-to-phoneme mapping, phonemic awareness, reading fluency) measured on standardized tests, and orthographic skills measured on experimental computerized tasks. Among university students (N = 152), correlational analyses showed greater Stroop interference to be associated with (a) relatively low scores on all standardized reading tests, and (b) longer response latencies on orthographic tasks. Hierarchical regression demonstrated that reading fluency and prelexical orthographic processing predicted unique and significant variance in Stroop interference beyond baseline rapid naming. Results suggest that strong reading skills, including orthographic processing, play a supportive role in resolving Stroop interference.

Why Is Rapid Automatized Naming Related to Reading?

ERIC Educational Resources Information Center

Georgiou, George K.; Parrila, Rauno; Cui, Ying; Papadopoulos, Timothy C.

2013-01-01

The objective of this study was to examine why rapid automatized naming (RAN) is related to reading by manipulating processes involved at the input, processing, and output stages of its production. In total, 65 children in Grade 2 and 65 in Grade 6 were assessed on serial and discrete RAN (Digits and Objects), Cancellation, RAN Yes/No, and oral…

Paying attention to reading: the neurobiology of reading and dyslexia.

PubMed

Shaywitz, Sally E; Shaywitz, Bennett A

2008-01-01

Extraordinary progress in functional brain imaging, primarily advances in functional magnetic resonance imaging, now allows scientists to understand the neural systems serving reading and how these systems differ in dyslexic readers. Scientists now speak of the neural signature of dyslexia, a singular achievement that for the first time has made what was previously a hidden disability, now visible. Paralleling this achievement in understanding the neurobiology of dyslexia, progress in the identification and treatment of dyslexia now offers the hope of identifying children at risk for dyslexia at a very young age and providing evidence-based, effective interventions. Despite these advances, for many dyslexic readers, becoming a skilled, automatic reader remains elusive, in great part because though children with dyslexia can be taught to decode words, teaching children to read fluently and automatically represents the next frontier in research on dyslexia. We suggest that to break through this "fluency" barrier, investigators will need to reexamine the more than 20-year-old central dogma in reading research: the generation of the phonological code from print is modular, that is, automatic and not attention demanding, and not requiring any other cognitive process. Recent findings now present a competing view: other cognitive processes are involved in reading, particularly attentional mechanisms, and that disruption of these attentional mechanisms play a causal role in reading difficulties. Recognition of the role of attentional mechanisms in reading now offer potentially new strategies for interventions in dyslexia. In particular, the use of pharmacotherapeutic agents affecting attentional mechanisms not only may provide a window into the neurochemical mechanisms underlying dyslexia but also may offer a potential adjunct treatment for teaching dyslexic readers to read fluently and automatically. Preliminary studies suggest that agents traditionally used to treat disorders of attention, particularly attention-deficit/hyperactivity disorder, may prove to be an effective adjunct to improving reading in dyslexic students.

Characterizing the variation in pH measurements with apheresis platelets.

PubMed

Moroff, Gary; Seetharaman, Shalini; Kurtz, James; Wagner, Stephen J

2011-11-01

pH measurements of platelet (PLT) components remain a key parameter when assessing how storage and shipping conditions influence the retention of PLT properties. Studies were conducted to characterize variations in pH measured with two pH meters and a blood gas analyzer. Samples were obtained from apheresis PLT units that were stored with or without continuous agitation to measure a range of pH values. pH values were determined with pH meters at room temperature (20-24°C) upon placing of samples in 5-mL sterile polypropylene tubes and with the blood gas analyzer at 37°C upon injection of identical samples, with conversion to 22°C. The calculated coefficient of variation (%CV) of pH measurements using pH meters (n = 10) was 0.43% or less. The %CV values were comparable with different samples having pH values ranging from 6.0 to 7.4. The %CV levels with the blood gas analyzer were comparable to those observed with the pH meters. The difference in the mean pH values for the two pH meters was no greater than 0.10 units, with 9 of 10 samples having differences in values of 0.05 or less; however, greater differences of values (0.1 to 0.2) were observed between pH measured using the blood gas analyzer and pH meters. Our data show good precision and comparability of pH measurements with two pH meters. Differences in pH values were greater on comparison of the blood gas analyzer with the pH meters. © 2011 American Association of Blood Banks.

The Peak Flow Working Group: test of portable peak flow meters by explosive decompression.

PubMed

Pedersen, O F; Miller, M R

1997-02-01

In 1991, 50 new Vitalograph peak flow meters and 27 previously used mini-Wright peak flow meters were tested at three peak flows by use of a calibrator applying explosive decompression. The mini-Wright peak flow meters were also compared with eight new meters. For both makes of meter there was an excellent within-meter and between-meter variation. The accuracy, however, was poor, with a maximal overestimation of true flows of 50 and 70 L.min-1 in the interval from 200 to 400 L.min-1 for the Vitalograph and mini-Wright meters, respectively. The deviation is explained by the physical characteristics of the variable orifice peak flow meters. They have been supplied with equidistant scales, which give non-linear readings.

40 CFR 98.443 - Calculating CO2 geologic sequestration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... each gas-liquid separator for which flow is measured using a mass flow meter, you must calculate...) For each gas-liquid separator for which flow is measured using a volumetric flow meter, you must...) To aggregate production data, you must sum the mass of all of the CO2 separated at each gas-liquid...

A system for the real time, direct measurement of natural gas flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sowell, T.

1995-12-31

PMI/Badger Meter, Inc. with partial sponsorship from the Gas Research Institute, has designed and developed direct measurement total energy flow metering instrumentation. As industry demands for improved accuracy and speed of measurement have increased so has the complexity of the overall hardware and software systems. Considering traditional system approaches, few companies have the in house capability of maintaining a complete system. This paper addresses efforts to implement a direct, total gas energy flow metering system which is simple to use and cost effective.

The Effects of Age and Sublexical Automaticity on Reading Outcomes for Students with Reading Disabilities

ERIC Educational Resources Information Center

Metsala, Jamie L.; David, Margaret D.

2017-01-01

For students with reading disabilities, reading fluency has proven difficult to remediate. The current study examined age-related effects on measures of word and text-reading outcomes, within the context of a phonologically based remedial reading program. The contribution of speeded-reading of sublexical sound-spelling patterns to fluency outcomes…

Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine

NASA Astrophysics Data System (ADS)

Funke, H. H.-W.; Börner, S.; Hendrick, P.; Recker, E.

2011-10-01

The control of pollutant emissions has become more and more important by the development of new gas turbines. The use of hydrogen produced by renewable energy sources could be an alternative. Besides the reduction of NOx emissions emerged during the combustion process, another major question is how a hydrogen fuelled gas turbine including the metering unit can be controlled and operated. This paper presents a first insight in modifications on an Auxiliary Power Unit (APU) GTCP 36300 for using gaseous hydrogen as a gas turbine fuel. For safe operation with hydrogen, the metering of hydrogen has to be fast, precise, and secure. So, the quality of the metering unit's control loop has an important influence on this topic. The paper documents the empiric determination of the proportional integral derivative (PID) control parameters for the metering unit.

Mediating Effects of Working Memory in the Relation Between Rapid Automatized Naming and Chinese Reading Comprehension.

PubMed

Weng, Xiaoqian; Li, Guangze; Li, Rongbao

2016-08-01

This study examined the mediating role of working memory (WM) in the relation between rapid automatized naming (RAN) and Chinese reading comprehension. Three tasks assessing differentially visual and verbal components of WM were programmed by E-prime 2.0. Data collected from 55 Chinese college students were analyzed using correlations and hierarchical regression methods to determine the connection among RAN, reading comprehension, and WM components. Results showed that WM played a significant mediating role in the RAN-reading relation and that auditory WM made stronger contributions than visual WM. Taking into account of the multi-component nature of WM and the specificity of Chinese reading processing, this study discussed the mediating powers of the WM components, particularly auditory WM, further clarifying the possible components involved in the RAN-reading relation and thus providing some insight into the complicated Chinese reading process.

Drinking behavior in nursery pigs: Determining the accuracy between an automatic water meter versus human observers

USDA-ARS?s Scientific Manuscript database

Assimilating accurate behavioral events over a long period can be labor intensive and relatively expensive. If an automatic device could accurately record the duration and frequency for a given behavioral event, it would be a valuable alternative to the traditional use of human observers for behavio...

77 FR 8722 - Airworthiness Directives; Eurocopter Deutschland Model EC135 Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... that in the past, the FADEC FAIL caution light illuminated on a few EC135 T1 helicopters. It states... metering unit and transmitted to the FADEC. This discrepancy led to the display of the FADEC FAIL caution... the FADEC to automatically meter fuel, indicated by a FADEC FAIL cockpit caution light, and subsequent...

The Effect of Automatization of the Phonological Component on the Reading Comprehension of ESP Students

ERIC Educational Resources Information Center

Khatib, Mohammad; Fat'hi, Jalil

2011-01-01

Prompted by the recent shift of attention from just focusing on the top-down processing in L2 reading towards considering the basic component, bottom-up processing, the role of phonological component has also enjoyed popularity among a selected circle of SLA investigators (Koda, 2005). This study investigated the effect of the automatization of…

Phoneme Awareness, Visual-Verbal Paired-Associate Learning, and Rapid Automatized Naming as Predictors of Individual Differences in Reading Ability

ERIC Educational Resources Information Center

Warmington, Meesha; Hulme, Charles

2012-01-01

This study examines the concurrent relationships between phoneme awareness, visual-verbal paired-associate learning, rapid automatized naming (RAN), and reading skills in 7- to 11-year-old children. Path analyses showed that visual-verbal paired-associate learning and RAN, but not phoneme awareness, were unique predictors of word recognition,…

Reading Aloud Is Not Automatic: Processing Capacity Is Required to Generate a Phonological Code from Print

ERIC Educational Resources Information Center

Reynolds, Michael; Besner, Derek

2006-01-01

The present experiments tested the claim that phonological recoding occurs "automatically" by assessing whether it uses central attention in the context of the psychological refractory period paradigm. Task 1 was a tone discrimination task and Task 2 was reading aloud. The joint effects of long-lag word repetition priming and stimulus onset…

Growth in Rapid Automatized Naming from Grades K to 8 in Children with Math or Reading Disabilities

ERIC Educational Resources Information Center

Mazzocco, Michèle M. M.; Grimm, Kevin J.

2013-01-01

Rapid automatized naming (RAN) is widely used to identify reading disabilities (RD) and has recently been considered a potential predictor of risk for mathematics learning disabilities (MLD). Here we longitudinally examine RAN performance from Grades K to 8, to view how growth on RAN response time differs for children with RD versus MLD. Across…

78 FR 1851 - Sabine Pass Liquefaction, LLC and Sabine Pass LNG, L.P.; Notice of Intent To Prepare an...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... gas liquids (NGL) truck loading facilities. A Project location map depicting the proposed facilities..., metering and send-out facilities; four gas pipeline meter stations; additional workspaces, laydown and... project is further developed. On natural gas projects, the APE at a minimum encompasses all areas subject...

Design and Implementation of Pointer-Type Multi Meters Intelligent Recognition Device Based on ARM Platform

NASA Astrophysics Data System (ADS)

Cui, Yang; Luo, Wang; Fan, Qiang; Peng, Qiwei; Cai, Yiting; Yao, Yiyang; Xu, Changfu

2018-01-01

This paper adopts a low power consumption ARM Hisilicon mobile processing platform and OV4689 camera, combined with a new skeleton extraction based on distance transform algorithm and the improved Hough algorithm for multi meters real-time reading. The design and implementation of the device were completed. Experimental results shows that The average error of measurement was 0.005MPa, and the average reading time was 5s. The device had good stability and high accuracy which meets the needs of practical application.

7 CFR 1767.28 - Customer accounts expenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performed by meter readers and the work represents a minor activity incidental to regular meter reading... funds or to insurance companies for pension purposes. 2. Group and life insurance premiums (credit... used, and expenses incurred in work on customer applications, contracts, orders, credit investigations...

Effects of Journeys Reading Intervention on Reading Achievement of Students with Disabilities

ERIC Educational Resources Information Center

Cloud, Antre'

2017-01-01

In Georgia, students with disabilities are falling behind students without disabilities in reading. Students with disabilities need to learn how to read fluently and comprehend because reading is embedded in all academic areas. Guided by LaBerge and Samuels's theory of automatic information processing in reading, the purpose of the study was to…

17 CFR 256.307 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., communications and dispatching, automatic data processing, information storage and retrieval, research and laboratory testing, construction, meter repairing, and printing and stationery. Subaccounts shall be...

What Automaticity Deficit? Activation of Lexical Information by Readers with Dyslexia in a Rapid Automatized Naming Stroop-Switch Task

ERIC Educational Resources Information Center

Jones, Manon W.; Snowling, Margaret J.; Moll, Kristina

2016-01-01

Reading fluency is often predicted by rapid automatized naming (RAN) speed, which as the name implies, measures the automaticity with which familiar stimuli (e.g., letters) can be retrieved and named. Readers with dyslexia are considered to have less "automatized" access to lexical information, reflected in longer RAN times compared with…

Gas exchange-wind speed relation measured with sulfur hexafluoride on a lake

NASA Technical Reports Server (NTRS)

Wanninkhof, R.; Broecker, W. S.; Ledwell, J. R.

1985-01-01

Gas-exchange processes control the uptake and release of various gases in natural systems such as oceans, rivers, and lakes. Not much is known about the effect of wind speed on gas exchange in such systems. In the experiment described here, sulfur hexafluoride was dissolved in lake water, and the rate of escape of the gas with wind speed (at wind speeds up to 6 meters per second) was determined over a 1-month period. A sharp change in the wind speed dependence of the gas-exchange coefficient was found at wind speeds of about 2.4 meters per second, in agreement with the results of wind-tunnel studies. However the gas-exchange coefficients at wind speeds above 3 meters per second were smaller than those observed in wind tunnels and are in agreement with earlier lake and ocean results.

The Development of Reading for Comprehension: An Information Processing Analysis. Final Report.

ERIC Educational Resources Information Center

Schadler, Margaret; Juola, James F.

This report summarizes research performed at the Universtiy of Kansas that involved several topics related to reading and learning to read, including the development of automatic word recognition processes, reading for comprehension, and the development of new computer technologies designed to facilitate the reading process. The first section…

Effectiveness of Miles-Per-Gallon Meters as a Means to Conserve Gasoline in Automobiles

DOT National Transportation Integrated Search

1976-10-01

This report is an assessment of fuel flow instruments reading directly in miles per gallon (mpg). It describes currently available mpg meters, their installation, utility, and safety and presents an analysis of potential cost savings. It discusses me...

Visible foliar injury caused by ozone alters the relationship between SPAD meter readings and chlorophyll concentrations in cutleaf coneflower.

PubMed

Neufeld, Howard S; Chappelka, Arthur H; Somers, Greg L; Burkey, Kent O; Davison, Alan W; Finkelstein, Peter L

2006-03-01

The ability of the SPAD-502 chlorophyll meter to quantify chlorophyll amounts in ozone-affected leaves of cutleaf coneflower (Rudbeckia laciniata var. digitata) was assessed in this study. When relatively uninjured leaves were measured (percent leaf area affected by stipple less than 6%), SPAD meter readings were linearly related to total chlorophyll with an adjusted R (2) of 0.84. However, when leaves with foliar injury (characterized as a purple to brownish stipple on the upper leaf surface affecting more than 6% of the leaf area) were added, likelihood ratio tests showed that it was no longer possible to use the same equation to obtain chlorophyll estimations for both classes of leaves. Either an equation with a common slope or a common intercept was necessary. We suspect several factors are involved in altering the calibration of the SPAD meter for measuring chlorophyll amounts in visibly ozone-injured leaves, with the most likely being changes in either light absorption or scattering resulting from tissue necrosis.

The Impact of Rapid Automatized Naming and Phonological Awareness on the Reading Fluency of a Minority Student Population

ERIC Educational Resources Information Center

Taub, Gordon E.; Szente, Judit

2012-01-01

The purpose of this study was to explore the relationship between phonological awareness (PA) and rapid automatized naming (RAN) on the reading fluency (RF) of students from traditionally underrepresented groups. The study included 86 participants attending 1st through 4th grade within an inner-city charter school located in a high-poverty, urban…

METHANE EMISSIONS FROM THE NATURAL GAS INDUSTRY VOLUME 10: METERING AND PRESSURE REGULATING STATIONS IN NATURAL GAS TRANSMISSIONS AND DISTRIBUTION

EPA Science Inventory

The 15-volume report summarizes the results of a comprehensive program to quantify methane (CH4) emissions from the U.S. natural gas industry for the base year. The objective was to determine CH4 emissions from the wellhead and ending downstream at the customer's meter. The accur...

Improved Airborne Gravity Results Using New Relative Gravity Sensor Technology

NASA Astrophysics Data System (ADS)

Brady, N.

2013-12-01

Airborne gravity data has contributed greatly to our knowledge of subsurface geophysics particularly in rugged and otherwise inaccessible areas such as Antarctica. Reliable high quality GPS data has renewed interest in improving the accuracy of airborne gravity systems and recent improvements in the electronic control of the sensor have increased the accuracy and ability of the classic Lacoste and Romberg zero length spring gravity meters to operate in turbulent air conditions. Lacoste and Romberg type gravity meters provide increased sensitivity over other relative gravity meters by utilizing a mass attached to a horizontal beam which is balanced by a ';zero length spring'. This type of dynamic gravity sensor is capable of measuring gravity changes on the order of 0.05 milliGals in laboratory conditions but more commonly 0.7 to 1 milliGal in survey use. The sensor may have errors induced by the electronics used to read the beam position as well as noise induced by unwanted accelerations, commonly turbulence, which moves the beam away from its ideal balance position otherwise known as the reading line. The sensor relies on a measuring screw controlled by a computer which attempts to bring the beam back to the reading line position. The beam is also heavily damped so that it does not react to most unwanted high frequency accelerations. However this heavily damped system is slow to react, particularly in turns where there are very high Eotvos effects. New sensor technology utilizes magnetic damping of the beam coupled with an active feedback system which acts to effectively keep the beam locked at the reading line position. The feedback system operates over the entire range of the system so there is now no requirement for a measuring screw. The feedback system operates at very high speed so that even large turbulent events have minimal impact on data quality and very little, if any, survey line data is lost because of large beam displacement errors. Airborne testing along with results from ground based van testing and laboratory results have shown that the new sensor provides more consistent gravity data, as measured by repeated line surveys, as well as preserving the inherent sensitivity of the Lacoste and Romberg zero length spring design. The sensor also provides reliability during survey operation as there is no mechanical counter screw. Results will be presented which show the advantages of the new sensor system over the current technology in both data quality and survey productivity. Applications include high resolution geoid mapping, crustal structure investigations and resource mapping of minerals, oil and gas.

The Effects of Reading Fluency Interventions on the Reading Fluency and Reading Comprehension Performance of Elementary Students with Learning Disabilities: A Synthesis of the Research from 2001 to 2014

ERIC Educational Resources Information Center

Stevens, Elizabeth A.; Walker, Melodee A.; Vaughn, Sharon

2017-01-01

Fluent word reading is hypothesized to facilitate reading comprehension by improving automatic word reading, thus releasing a reader's cognitive resources to focus on meaning. Many students with learning disabilities (LD) struggle to develop reading fluency, which affects reading comprehension. This synthesis extends Chard, Vaughn, and Tyler's…

Offshore multiphase meter nears acceptable accuracy level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaisford, S.; Amdal, J.; Berentsen, H.

1993-05-17

Companies worldwide are looking for new production methods for offshore oil fields. In many areas, undeveloped smaller fields cannot bear the cost of dedicated production facilities. Multiphase transportation to existing production facilities can extend the distance over which unseparated oil, water, and gas streams can be transported, from a limit of several kilometers today to perhaps 200 km in the future. An encouraging multiphase meter test was sponsored by Saga Petroleum AS and carried out by Den norske stats oljeselskap AS (Statoil) on the Gullfaks B platform, Norwegian sector of the North Sea. The complete multiphase meter has two separatemore » meters. One is the composition meter for measuring the instantaneous volume or mass fractions of oil, water, and gas in the sensor. The other is a velocity meter for determining the speed of the mixture through the sensor. An instantaneous volume or mass production rate for each component is calculated by combining the outputs from the two meters. The paper describes the multiphase meter; measurements; limitations; the test setup; calibration; test results for the composition meter, velocity meter, and production rates; and future plans.« less

Diagnostic accuracy of semi-automatic quantitative metrics as an alternative to expert reading of CT myocardial perfusion in the CORE320 study.

PubMed

Ostovaneh, Mohammad R; Vavere, Andrea L; Mehra, Vishal C; Kofoed, Klaus F; Matheson, Matthew B; Arbab-Zadeh, Armin; Fujisawa, Yasuko; Schuijf, Joanne D; Rochitte, Carlos E; Scholte, Arthur J; Kitagawa, Kakuya; Dewey, Marc; Cox, Christopher; DiCarli, Marcelo F; George, Richard T; Lima, Joao A C

To determine the diagnostic accuracy of semi-automatic quantitative metrics compared to expert reading for interpretation of computed tomography perfusion (CTP) imaging. The CORE320 multicenter diagnostic accuracy clinical study enrolled patients between 45 and 85 years of age who were clinically referred for invasive coronary angiography (ICA). Computed tomography angiography (CTA), CTP, single photon emission computed tomography (SPECT), and ICA images were interpreted manually in blinded core laboratories by two experienced readers. Additionally, eight quantitative CTP metrics as continuous values were computed semi-automatically from myocardial and blood attenuation and were combined using logistic regression to derive a final quantitative CTP metric score. For the reference standard, hemodynamically significant coronary artery disease (CAD) was defined as a quantitative ICA stenosis of 50% or greater and a corresponding perfusion defect by SPECT. Diagnostic accuracy was determined by area under the receiver operating characteristic curve (AUC). Of the total 377 included patients, 66% were male, median age was 62 (IQR: 56, 68) years, and 27% had prior myocardial infarction. In patient based analysis, the AUC (95% CI) for combined CTA-CTP expert reading and combined CTA-CTP semi-automatic quantitative metrics was 0.87(0.84-0.91) and 0.86 (0.83-0.9), respectively. In vessel based analyses the AUC's were 0.85 (0.82-0.88) and 0.84 (0.81-0.87), respectively. No significant difference in AUC was found between combined CTA-CTP expert reading and CTA-CTP semi-automatic quantitative metrics in patient based or vessel based analyses(p > 0.05 for all). Combined CTA-CTP semi-automatic quantitative metrics is as accurate as CTA-CTP expert reading to detect hemodynamically significant CAD. Copyright © 2018 Society of Cardiovascular Computed Tomography. Published by Elsevier Inc. All rights reserved.

Interaction Quality During Partner Reading

ERIC Educational Resources Information Center

Meisinger, Elizabeth B.; Schwanenflugel, Paula J.; Bradley, Barbara A.; Stahl, Steven A.

2004-01-01

The influence of social relationships, positive interdependence, and teacher structure on the quality of partner reading interactions was examined. Partner reading, a scripted cooperative learning strategy, is often used in classrooms to promote the development of fluent and automatic reading skills. Forty-three pairs of second grade children were…

Clinical utility of pH paper versus pH meter in the measurement of critical gastric pH in stress ulcer prophylaxis.

PubMed

Bradley, J S; Phillips, J O; Cavanaugh, J E; Metzler, M H

1998-11-01

To evaluate the clinical utility of measuring gastric pH with a pH meter vs. pH paper in critical care patients. Prospective comparison of gastric pH measurements, using both pH meter and pH paper. Surgical intensive care unit (ICU) at a rural Midwestern university medical center. Fifty-one patients who received therapy for prophylaxis of stress ulcers in the surgical ICU. Therapy for stress ulcer prophylaxis was monitored. The pH of 985 gastric samples, taken from 51 patients, was measured with both pH meter and pH paper. The pH meter and pH paper measures demonstrated a concordance correlation coefficient of .896. The mean difference between the two measures (pH paper - pH meter) was estimated to be between -0.4 and 1.4, suggesting a positive bias for the paper. The prevalence of events representing clinically relevant differences between the pH meter and pH paper in the measurement of the same gastric sample was calculated. The frequency with which each of the events occurred consecutively (or, in one case, two nearly consecutive events on the same day) was also calculated. Bias in a clinically relevant range was estimated. A set of "probability profiles" was constructed. A hand-held pH meter and pH paper are not interchangeable measures of gastric pH. The pH paper exhibits an appreciable positive bias compared with a hand-held pH meter in the clinically relevant range of 2 to 6. More research is needed to determine if that bias affects treatment outcomes. We recommend the use of a pH meter for patients who demonstrate pH readings of < or = 4, consecutive with readings of < or = 5.

Speech recognition-based and automaticity programs to help students with severe reading and spelling problems.

PubMed

Higgins, Eleanor L; Raskind, Marshall H

2004-12-01

This study was conducted to assess the effectiveness of two programs developed by the Frostig Center Research Department to improve the reading and spelling of students with learning disabilities (LD): a computer Speech Recognition-based Program (SRBP) and a computer and text-based Automaticity Program (AP). Twenty-eight LD students with reading and spelling difficulties (aged 8 to 18) received each program for 17 weeks and were compared with 16 students in a contrast group who did not receive either program. After adjusting for age and IQ, both the SRBP and AP groups showed significant differences over the contrast group in improving word recognition and reading comprehension. Neither program showed significant differences over contrasts in spelling. The SRBP also improved the performance of the target group when compared with the contrast group on phonological elision and nonword reading efficiency tasks. The AP showed significant differences in all process and reading efficiency measures.

49 CFR 210.31 - Operation standards (stationary locomotives at 30 meters).

Code of Federal Regulations, 2011 CFR

2011-10-01

... prescribed in paragraph (a)(2) of this section, the A-weighted sound level reading in decibels shall be... A-weighted sound level reading in decibels that is observed during the 30-second period of time... test; (3) Date of test; and (4) The A-weighted sound level reading in decibels obtained during the...

COMPARING MOISTURE METER READINGS WITH MEASURED EQUILIBRIUM MOISTURE CONTENT OF GYPSUM BOARD

EPA Science Inventory

Moisture meters routinely used in the field to determine the moisture content in gypsum wallboard are primarily designed and manufactured to measure the moisture content of wood. Often they are used to decide whether to replace wallboard by determining if moisture is qualitativel...

49 CFR 192.359 - Customer meter installations: Operating pressure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meter installations: Operating pressure... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure...

Active bypass flow control for a seal in a gas turbine engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebert, Todd A.; Kimmel, Keith D.

An active bypass flow control system for controlling bypass compressed air based upon leakage flow of compressed air flowing past an outer balance seal between a stator and rotor of a first stage of a gas turbine in a gas turbine engine is disclosed. The active bypass flow control system is an adjustable system in which one or more metering devices may be used to control the flow of bypass compressed air as the flow of compressed air past the outer balance seal changes over time as the outer balance seal between the rim cavity and the cooling cavity wearsmore » In at least one embodiment, the metering device may include an annular ring having at least one metering orifice extending therethrough, whereby alignment of the metering orifice with the outlet may be adjustable to change a cross-sectional area of an opening of aligned portions of the outlet and the metering orifice.« less

Energy transfer model and its applications of ultrasonic gas flow-meter under static and dynamic flow rates

NASA Astrophysics Data System (ADS)

Fang, Min; Xu, Ke-Jun; Zhu, Wen-Jiao; Shen, Zi-Wen

2016-01-01

Most of the ultrasonic gas flow-meters measure the gas flow rate by calculating the ultrasonic transmission time difference between the downstream and upstream. Ultrasonic energy attenuation occurs in the processes of the ultrasonic generation, conversion, transmission, and reception. Additionally, at the same time, the gas flow will also affect the ultrasonic propagation during the measurement, which results in the ultrasonic energy attenuation and the offset of ultrasonic propagation path. Thus, the ultrasonic energy received by the transducer is weaker. When the gas flow rate increases, this effect becomes more apparent. It leads to the measurement accuracy reduced, and the measurement range narrowed. An energy transfer model, where the ultrasonic gas flow-meter under without/with the gas flow, is established by adopting the statistical analysis and curve fitting based on a large amount of experimental data. The static sub model without the gas flow expresses the energy conversion efficiency of ultrasonic gas transducers, and the dynamic sub model with the gas flow reflects the energy attenuation pattern following the flow rate variations. The mathematical model can be used to determine the minimum energy of the excitation signal for meeting the requirement of specific measurement range, and predict the maximum measurable flow rate in the case of fixed energy of excitation signal. Based on the above studies, a method to enhance the excitation signal energy is proposed under the output power of the transmitting circuit being a finite value so as to extend the measurement rage of ultrasonic gas flow-meter.

Think the thought, walk the walk - social priming reduces the Stroop effect.

PubMed

Goldfarb, Liat; Aisenberg, Daniela; Henik, Avishai

2011-02-01

In the Stroop task, participants name the color of the ink that a color word is written in and ignore the meaning of the word. Naming the color of an incongruent color word (e.g., RED printed in blue) is slower than naming the color of a congruent color word (e.g., RED printed in red). This robust effect is known as the Stroop effect and it suggests that the intentional instruction - "do not read the word" - has limited influence on one's behavior, as word reading is being executed via an automatic path. Herein is examined the influence of a non-intentional instruction - "do not read the word" - on the Stroop effect. Social concept priming tends to trigger automatic behavior that is in line with the primed concept. Here participants were primed with the social concept "dyslexia" before performing the Stroop task. Because dyslectic people are perceived as having reading difficulties, the Stroop effect was reduced and even failed to reach significance after the dyslectic person priming. A similar effect was replicated in a further experiment, and overall it suggests that the human cognitive system has more success in decreasing the influence of another automatic process via an automatic path rather than via an intentional path. Copyright © 2010 Elsevier B.V. All rights reserved.

Direct reading inductance meter

NASA Technical Reports Server (NTRS)

Kolby, R. B. (Inventor)

1977-01-01

A direct reading inductance meter comprised of a crystal oscillator and an LC tuned oscillator is presented. The oscillators function respectively to generate a reference frequency, f(r), and to generate an initial frequency, f(0), which when mixed produce a difference equal to zero. Upon connecting an inductor of small unknown value in the LC circuit to change its resonant frequency to f(x), a difference frequency (f(r)-f(x)) is produced that is very nearly a linear function of the inductance of the inductor. The difference frequency is measured and displayed on a linear scale in units of inductance.

78 FR 25067 - Northwest Pipeline GP; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-29

... the Blue Water Liquefied Natural Gas (LNG) Meter Station and associated appurtenances at Benton County, Washington. The Blue Water LNG Meter Station will include three meters, associated valves and piping, and...

GAS METERING PUMP

DOEpatents

George, C.M.

1957-12-31

A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

Fiber in the Local Loop: The Role of Electric Utilities

NASA Astrophysics Data System (ADS)

Meehan, Charles M.

1990-01-01

Electric utilities are beginning to make heavy use of fiber for a number of applications beyond transmission of voice and data among operating centers and plant facilities which employed fiber on the electric transmission systems. These additional uses include load management and automatic meter reading. Thus, utilities are beginning to place fiber on the electric distribution systems which, in many cases covers the same customer base as the "local loop". This shift to fiber on the distribution system is due to the advantages offered by fiber and because of congestion in the radio bands used for load management. This shift to fiber has been facilitated by a regulatory policy permitting utilities to lease reserve capacity on their fiber systems on an unregulated basis. This, in turn, has interested electric utilities in building fiber to their residential and commercial customers for voice, data and video. This will also provide for sophisticated load management systems and, possibly, generation of revenue.

Development of Power Supply Management Module for Radio Signal Repeaters of Automatic Metering Reading System in Variable Solar Density Conditions

NASA Astrophysics Data System (ADS)

Kondratjevs, K.; Zabasta, A.; Selmanovs-Pless, V.

2016-02-01

In recent years, there has been significant research focus that revolves around harvesting and minimising energy consumption by wireless sensor network nodes. When a sensor node is depleted of energy, it becomes unresponsive and disconnected from the network that can significantly influence the performance of the whole network. The purpose of the present research is to create a power supply management module in order to provide stable operating voltage for autonomous operations of radio signal repeaters, sensors or gateways of WSN. The developed management module is composed of a solar panel, lithium battery and power supply management module. The novelty of the research is the management module, which ensures stable and uninterrupted operations of electronic equipment in various power supply modes in different situations, simultaneously ensuring energy protection and sustainability of the module components. The management module is able to provide power supply of 5 V for electronics scheme independently, without power interruption switching between power sources and power flows in different directions.

49 CFR 192.357 - Customer meters and regulators: Installation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meters and regulators: Installation. 192... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a...

Relationship between chlorophyll density and SPAD chlorophyll meter reading for Jerusalem artichoke (Helianthus tuberosus L.)

USDA-ARS?s Scientific Manuscript database

Chlorophyll is an indicator of crop health and productivity. Measuring chlorophyll is usually done directly and requires significant time and resources. Indirect measurement of chlorophyll density using a handheld portable chlorophyll meter can reduce time. However, this information is very limit...

AUTOMATIC MASS SPECTROMETER

DOEpatents

Hanson, M.L.; Tabor, C.D. Jr.

1961-12-01

A mass spectrometer for analyzing the components of a gas is designed which is capable of continuous automatic operation such as analysis of samples of process gas from a continuous production system where the gas content may be changing. (AEC)

Apparatus and method to inject a reductant into an exhaust gas feedstream

DOEpatents

Viola, Michael B [Macomb Township, MI

2009-09-22

An exhaust aftertreatment system for an internal combustion engine is provided including an apparatus and method to inject a reductant into the exhaust gas feedstream. Included is a fuel metering device adapted to inject reductant into the exhaust gas feedstream and a controllable pressure regulating device. A control module is operatively connected to the reductant metering device and the controllable pressure regulating device, and, adapted to effect flow of reductant into the exhaust gas feedstream over a controllable flow range.

Effect of ambient pressure variation on closed loop gas system for India based Neutrino Observatory (INO)

NASA Astrophysics Data System (ADS)

Satyanarayana, B.; Majumder, G.; Mondal, N. K.; Kalmani, S. D.; Shinde, R. R.; Joshi, A.

2014-10-01

Pilot unit of a closed loop gas mixing and distribution system for the INO project was designed and is being operated with 1.8meters × 1.9meters RPCs for about two years. A number of studies on controlling the flow and optimisation of the gas mixture through the RPC stack were carried out during this period. The gas system essentially measures and attempts to maintain absolute pressure inside the RPC gas volume. During typical Mumbai monsoon seasons, the barometric pressure changes rather rapidly, due to which the gas system fails to maintain the set differential pressure between the ambience and the RPC gas volume. As the safety bubblers on the RPC gas input lines are set to work on fixed pressure differentials, the ambient pressure changes lead to either venting out and thus wasting gas through safety bubblers or over pressuring the RPCs gas volume and thus degrading its performance. The above problem also leads to gas mixture contamination through minute leaks in gas gap. The problem stated above was solved by including the ambient barometric pressure as an input parameter in the closed loop. Using this, it is now possible to maintain any set differential pressure between the ambience and RPC gas volumes between 0 to 20mm of water column, thus always ensuring a positive pressure inside the RPC gas volume with respect to the ambience. This has resulted in improved performance of the gas system by maintaining the constant gas flow and reducing the gas toping up frequency. In this paper, we will highlight the design features and improvements of the closed loop gas system. We will present some of the performance studies and considerations for scaling up the system to be used with the engineering module and then followed by Iron Calorimeter detector (ICAL), which is designed to deploy about 30,000 RPCs of 1.8meters × 1.9 meters in area.

A Simple Laboratory Experiment to Determine the Kinetics of Mutarotation of D-Glucose Using a Blood Glucose Meter

ERIC Educational Resources Information Center

Perles, Carlos E.; Volpe, Pedro L. O.

2008-01-01

A simple commercial blood glucose meter is used to follow the kinetics of mutarotation of D-glucose in aqueous solution. The results may be compared with those obtained using an automatic polarimeter, if this is available This experiment is proposed for use by students in a general chemistry, biology, organic chemistry, and physical chemistry…

AN AUTOMATIC DEVICE FOR READING TYPOGRAPHICAL TEXTS,

DTIC Science & Technology

permissible. The system represents an attempt to apply the methods of machines designed for typescript reading to machines reading printed texts...Some characteristics by which typescript and typographical material differ are presented. The basic aspects of the recognition algorithm are given. A

The emergence of automaticity in reading: Effects of orthographic depth and word decoding ability on an adjusted Stroop measure.

PubMed

Megherbi, Hakima; Elbro, Carsten; Oakhill, Jane; Segui, Juan; New, Boris

2018-02-01

How long does it take for word reading to become automatic? Does the appearance and development of automaticity differ as a function of orthographic depth (e.g., French vs. English)? These questions were addressed in a longitudinal study of English and French beginning readers. The study focused on automaticity as obligatory processing as measured in the Stroop test. Measures of decoding ability and the Stroop effect were taken at three time points during first grade (and during second grade in the United Kingdom) in 84 children. The study is the first to adjust the classic Stroop effect for inhibition (of distracting colors). The adjusted Stroop effect was zero in the absence of reading ability, and it was found to develop in tandem with decoding ability. After a further control for decoding, no effects of age or orthography were found on the adjusted Stroop measure. The results are in line with theories of the development of whole word recognition that emphasize the importance of the acquisition of the basic orthographic code. Copyright © 2017 Elsevier Inc. All rights reserved.

10 CFR Appendix I to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Conventional Ranges, Conventional...

Code of Federal Regulations, 2011 CFR

2011-01-01

...) (density of mercury equals 13.595 grams per cubic centimeter). 1.9Thermocouple means a device consisting of... Cleaning Operations per Year T—Temperature t—Time V—Volume of Gas Consumed W—Weight of Test Block 2. Test.... 2.9.2Gas Measurements. 2.9.2.1Positive displacement meters. The gas meter to be used for measuring...

What Discrete and Serial Rapid Automatized Naming Can Reveal about Reading

ERIC Educational Resources Information Center

de Jong, Peter F.

2011-01-01

Serial rapid automized naming (RAN) has been often found to correlate more strongly with reading than discrete RAN. This study aimed to demonstrate that the strength of the RAN-reading fluency relationship is dependent on the format of both RAN and the reading task if the reading task consists of sight words. Seventy-one first-grade, 74…

Automatic River Network Extraction from LIDAR Data

NASA Astrophysics Data System (ADS)

Maderal, E. N.; Valcarcel, N.; Delgado, J.; Sevilla, C.; Ojeda, J. C.

2016-06-01

National Geographic Institute of Spain (IGN-ES) has launched a new production system for automatic river network extraction for the Geospatial Reference Information (GRI) within hydrography theme. The goal is to get an accurate and updated river network, automatically extracted as possible. For this, IGN-ES has full LiDAR coverage for the whole Spanish territory with a density of 0.5 points per square meter. To implement this work, it has been validated the technical feasibility, developed a methodology to automate each production phase: hydrological terrain models generation with 2 meter grid size and river network extraction combining hydrographic criteria (topographic network) and hydrological criteria (flow accumulation river network), and finally the production was launched. The key points of this work has been managing a big data environment, more than 160,000 Lidar data files, the infrastructure to store (up to 40 Tb between results and intermediate files), and process; using local virtualization and the Amazon Web Service (AWS), which allowed to obtain this automatic production within 6 months, it also has been important the software stability (TerraScan-TerraSolid, GlobalMapper-Blue Marble , FME-Safe, ArcGIS-Esri) and finally, the human resources managing. The results of this production has been an accurate automatic river network extraction for the whole country with a significant improvement for the altimetric component of the 3D linear vector. This article presents the technical feasibility, the production methodology, the automatic river network extraction production and its advantages over traditional vector extraction systems.

The Relationship between Reading Fluency and Reading Comprehension in Fifth-Grade Turkish Students

ERIC Educational Resources Information Center

Yildiz, Mustafa; Yildirim, Kasim; Ates, Seyit; Rasinski, Timothy; Fitzgerald, Shawn; Zimmerman, Belinda

2014-01-01

This research study focused on the relationships among the various components of reading fluency components (word recognition accuracy, automaticity, and prosody), as well as their relationships with reading comprehension among fifth-grade students in Turkey. A total of 119 fifth-grade elementary school students participated in the study. The…

A Cost Estimation Analysis of U.S. Navy Ship Fuel-Savings Techniques and Technologies

DTIC Science & Technology

2009-09-01

readings to the boiler operator. The PLC will provide constant automatic trimming of the excess oxygen based upon real time SGA readings. An SCD...the author): The Aegis Combat System is controlled by an advanced, automatic detect-and-track, multi-function three-dimensional passive...subsequently offloaded. An Online Wash System would reduce these maintenance costs and improve fuel efficiency of these engines by keeping the engines

ARM Airborne Continuous carbon dioxide measurements

DOE Data Explorer

Biraud, Sebastien

2013-03-26

The heart of the AOS CO2 Airborne Rack Mounted Analyzer System is the AOS Manifold. The AOS Manifold is a nickel coated aluminum analyzer and gas processor designed around two identical nickel-plated gas cells, one for reference gas and one for sample gas. The sample and reference cells are uniquely designed to provide optimal flushing efficiency. These cells are situated between a black-body radiation source and a photo-diode detection system. The AOS manifold also houses flow meters, pressure sensors and control valves. The exhaust from the analyzer flows into a buffer volume which allows for precise pressure control of the analyzer. The final piece of the analyzer is the demodulator board which is used to convert the DC signal generated by the analyzer into an AC response. The resulting output from the demodulator board is an averaged count of CO2 over a specified hertz cycle reported in volts and a corresponding temperature reading. The system computer is responsible for the input of commands and therefore works to control the unit functions such as flow rate, pressure, and valve control.The remainder of the system consists of compressors, reference gases, air drier, electrical cables, and the necessary connecting plumbing to provide a dry sample air stream and reference air streams to the AOS manifold.

Measuring Accurately Single-Phase Sinusoidal and Non-Sinusoidal Power.

DTIC Science & Technology

1983-01-01

current component. Since the induction watthour meter is designed for measuring ac variations only, the creation of a dc component in an ac circuit due...available and the basic principle of measurement used in each. 3.1 Power Measuring Meters Instruments designed to measure the amount of average power...1.0 percent of full scale and + 0.5% of reading. 3.2 Encrgy Measuring Meters Instruments designed to measure the amount of power consumed in a circuit

Smart Grid Integrity Attacks: Characterizations and Countermeasures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Annarita Giani; Eilyan Bitar; Miles McQueen

2011-10-01

Real power injections at loads and generators, and real power flows on selected lines in a transmission network are monitored, transmitted over a SCADA network to the system operator, and used in state estimation algorithms to make dispatch, re-balance and other energy management system [EMS] decisions. Coordinated cyber attacks of power meter readings can be arranged to be undetectable by any bad data detection algorithm. These unobservable attacks present a serious threat to grid operations. Of particular interest are sparse attacks that involve the compromise of a modest number of meter readings. An efficient algorithm to find all unobservable attacksmore » [under standard DC load flow approximations] involving the compromise of exactly two power injection meters and an arbitrary number of power meters on lines is presented. This requires O(n2m) flops for a power system with n buses and m line meters. If all lines are metered, there exist canonical forms that characterize all 3, 4, and 5-sparse unobservable attacks. These can be quickly detected in power systems using standard graph algorithms. Known secure phase measurement units [PMUs] can be used as countermeasures against an arbitrary collection of cyber attacks. Finding the minimum number of necessary PMUs is NP-hard. It is shown that p + 1 PMUs at carefully chosen buses are sufficient to neutralize a collection of p cyber attacks.« less

Reading between the Lines: Accessing Information via "Youtube's" Automatic Captioning

ERIC Educational Resources Information Center

Smith, Chad; Allman, Tamby; Crocker, Samantha

2017-01-01

This study and discussion center upon the use of "YouTube's" automatic captioning feature with college-age adult readers. The study required 75 participants with college experience to view brief middle school science videos with automatic captioning on "YouTube" and answer comprehension questions based on material presented…

Pathways of the inferior frontal occipital fasciculus in overt speech and reading.

PubMed

Rollans, Claire; Cheema, Kulpreet; Georgiou, George K; Cummine, Jacqueline

2017-11-19

In this study, we examined the relationship between tractography-based measures of white matter integrity (ex. fractional anisotropy [FA]) from diffusion tensor imaging (DTI) and five reading-related tasks, including rapid automatized naming (RAN) of letters, digits, and objects, and reading of real words and nonwords. Twenty university students with no reported history of reading difficulties were tested on all five tasks and their performance was correlated with diffusion measures extracted through DTI tractography. A secondary analysis using whole-brain Tract-Based Spatial Statistics (TBSS) was also used to find clusters showing significant negative correlations between reaction time and FA. Results showed a significant relationship between the left inferior fronto-occipital fasciculus FA and performance on the RAN of objects task, as well as a strong relationship to nonword reading, which suggests a role for this tract in slower, non-automatic and/or resource-demanding speech tasks. There were no significant relationships between FA and the faster, more automatic speech tasks (RAN of letters and digits, and real word reading). These findings provide evidence for the role of the inferior fronto-occipital fasciculus in tasks that are highly demanding of orthography-phonology translation (e.g., nonword reading) and semantic processing (e.g., RAN object). This demonstrates the importance of the inferior fronto-occipital fasciculus in basic naming and suggests that this tract may be a sensitive predictor of rapid naming performance within the typical population. We discuss the findings in the context of current models of reading and speech production to further characterize the white matter pathways associated with basic reading processes. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

Evaluation of an Automated System for Reading and Interpreting Disk Diffusion Antimicrobial Susceptibility Testing of Fastidious Bacteria.

PubMed

Idelevich, Evgeny A; Becker, Karsten; Schmitz, Janne; Knaack, Dennis; Peters, Georg; Köck, Robin

2016-01-01

Results of disk diffusion antimicrobial susceptibility testing depend on individual visual reading of inhibition zone diameters. Therefore, automated reading using camera systems might represent a useful tool for standardization. In this study, the ADAGIO automated system (Bio-Rad) was evaluated for reading disk diffusion tests of fastidious bacteria. 144 clinical isolates (68 β-haemolytic streptococci, 28 Streptococcus pneumoniae, 18 viridans group streptococci, 13 Haemophilus influenzae, 7 Moraxella catarrhalis, and 10 Campylobacter jejuni) were tested on Mueller-Hinton agar supplemented with 5% defibrinated horse blood and 20 mg/L β-NAD (MH-F, Oxoid) according to EUCAST. Plates were read manually with a ruler and automatically using the ADAGIO system. Inhibition zone diameters, indicated by the automated system, were visually controlled and adjusted, if necessary. Among 1548 isolate-antibiotic combinations, comparison of automated vs. manual reading yielded categorical agreement (CA) without visual adjustment of the automatically determined zone diameters in 81.4%. In 20% (309 of 1548) of tests it was deemed necessary to adjust the automatically determined zone diameter after visual control. After adjustment, CA was 94.8%; very major errors (false susceptible interpretation), major errors (false resistant interpretation) and minor errors (false categorization involving intermediate result), calculated according to the ISO 20776-2 guideline, accounted to 13.7% (13 of 95 resistant results), 3.3% (47 of 1424 susceptible results) and 1.4% (21 of 1548 total results), respectively, compared to manual reading. The ADAGIO system allowed for automated reading of disk diffusion testing in fastidious bacteria and, after visual validation of the automated results, yielded good categorical agreement with manual reading.

Direct-reading inductance meter

NASA Technical Reports Server (NTRS)

Kolbly, R. B.

1977-01-01

Meter indicates from 30 nH to 3 micro H. Reference inductor of 15 micro H is made by winding 50 turns of Number 26 Formvar wire on Micrometal type 50-2 (or equivalent) core. Circuit eliminates requirement for complex instrument compensation prior to taking coil inductance measurement and thus is as easy to operate as common ohmmeter.

75 FR 76728 - Notice of a Regional Project Waiver of Section 1605 (Buy American) of the American Recovery and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

... single meter reading platform and in-home monitoring devices. Residential water meters have been supplied... Central Iowa Water Association AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA... reasonably available quantities and of a satisfactory quality] to the Central Iowa Water Association (CIWA...

Modeling the relationship between extractable chlorophyll and SPAD-502 readings for endangered plant species research

Treesearch

Tracy S. Hawkins; Emile S. Gardiner; Greg S. Comer

2009-01-01

Handheld chlorophyll meters have proven to be useful tools for rapid, nondestructive assessment of chlorophyll and nutrient status in various agricultural and arborescent plant species. We proposed that a SPAD-502 chlorophyll meter would provide valuable information when monitoring life cycle changes and intraspecific variation in...

75 FR 43088 - Personal Communications Services and Miscellaneous Wireless Communications Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... Sec. 27.50, paragraph (d) is revised to read as follows: Sec. 24.232 Power and antenna height limits... isotropically radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in... watts/MHz equivalent isotropically radiated power (EIRP) with an antenna height up to 300 meters HAAT...

An assessment of morphometric indices, blood chemistry variables and an energy meter as indicators of the whole body lipid content in Micropterus dolomieu, Sander vitreus and Ictalurus punctatus

USGS Publications Warehouse

Mesa, Matthew G.; Rose, Brien P.

2015-01-01

The effectiveness of several non-lethal techniques as indicators of total lipid content in smallmouth bass Micropterus dolomieu, walleye Sander vitreus and channel catfish Ictalurus punctatus was investigated. The techniques included (1) the Fulton and relative condition factors, (2) relative mass, (3) plasma indicators of nutritional status (alkaline phosphatase, calcium, cholesterol, protein, triglycerides and glucose) and (4) readings from a hand-held, microwave energy meter. Although simple linear regression analysis showed that lipid content was significantly correlated with several predictor variables in each species, the r2 values for the relations ranged from 0·17 to 0·50 and no single approach was consistent for all species. Only one model, between energy-meter readings and lipid content in I. punctatus, had an r2 value (0·83) high enough to justify using it as a predictive tool. Results indicate that no single variable was an accurate and reliable indicator of whole body lipid content in these fishes, except the energy meter for I. punctatus.

Inaccurate pulse CO-oximetry of carboxyhemoglobin due to digital clubbing: case report.

PubMed

Harlan, Nicole; Weaver, Lindell K; Deru, Kayla

2016-01-01

Newer pulse CO-oximeters provide a non-invasive and quick means of measuring oxyhemoglobin, carboxyhemoglobin and methemoglobin. Clubbing has been reported to cause inaccuracy in pulse oximeters. We present a case of inaccurate carboxy-hemoglobin measurement by pulse CO-oximetry due to digital clubbing. An 18-year-old man with a history of cystic fibrosis presented after a suicide attempt by inhalation of exhaust. At the initial emergency department evaluation, his blood carboxyhemoglobin was 33%. He was intubated, placed on 100% oxygen and transferred to our facility. Upon arrival, we placed three different pulse CO-oximeters on different fingers and toes. Carboxyhemoglobin levels measured by these meters ranged from 9%-11%. A venous blood gas drawn on arrival showed a carboxyhemoglobin level of 2.3% after four hours on 100% oxygen by endotracheal tube. Thirty minutes later, we checked arterial blood gas, which revealed a COHb level of 0.9%. Again, non-invasive carboxyhemoglobin measurements read 10%. The patient was treated with hyperbaric oxygen for carbon monoxide poisoning. This case suggests that non-invasive measurements of carboxyhemoglobin should be correlated with the clinic history and with an arterial or venous blood gas oximetry analysis.

Cumulative Timers for Microprocessors

NASA Technical Reports Server (NTRS)

Battle, John O.

2007-01-01

It has been proposed to equip future microprocessors with electronic cumulative timers, for essentially the same reasons for which land vehicles are equipped with odometers (total-distance-traveled meters) and aircraft are equipped with Hobbs meters (total-engine-operating time meters). Heretofore, there has been no way to determine the amount of use to which a microprocessor (or a product containing a microprocessor) has been subjected. The proposed timers would count all microprocessor clock cycles and could only be read by means of microprocessor instructions but, like odometers and Hobbs meters, could never be reset to zero without physically damaging the chip.

10 CFR Appendix I to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Conventional Ranges, Conventional...

Code of Federal Regulations, 2010 CFR

2010-01-01

... pressure of 30 inches of mercury (101.6 kPa) (density of mercury equals 13.595 grams per cubic centimeter...—Volume of Gas Consumed W—Weight of Test Block 2. Test Conditions 2.1Installation. A free standing kitchen.... 2.9.2Gas Measurements. 2.9.2.1Positive displacement meters. The gas meter to be used for measuring...

Vortex shedding flow meter performance at high flow velocities

NASA Technical Reports Server (NTRS)

Siegwarth, J. D.

1986-01-01

In some of the ducts of the Space Shuttle Main Engine (SSME), the maximum liquid oxygen flow velocities approach 10 times those at which liquid flow measurements are normally made. The hydrogen gas flow velocities in other ducts exceed the maximum for gas flow measurement by more than a factor of 3. The results presented here show from water flow tests that vortex shedding flow meters of the appropriate design can measure water flow to velocities in excess of 55 m/s, which is a Reynolds number of about 2 million. Air flow tests have shown that the same meter can measure flow to a Reynolds number of at least 22 million. Vortex shedding meters were installed in two of the SSME ducts and tested with water flow. Narrow spectrum lines were obtained and the meter output frequencies were proportional to flow to + or - 0.5% or better over the test range with no flow conditioning, even though the ducts had multiple bends preceeding the meter location. Meters with the shedding elements only partially spanning the pipe and some meters with ring shaped shedding elements were also tested.

Ride quality meter

NASA Technical Reports Server (NTRS)

Leatherwood, J. D.; Dempsey, T. K.; Clevenson, S. A.; Stephens, D. G. (Inventor)

1983-01-01

A ride quality meter is disclosed that automatically transforms vibration and noise measurements into a single number index of passenger discomfort. The noise measurements are converted into a noise discomfort value. The vibrations are converted into single axis discomfort values which are then converted into a combined axis discomfort value. The combined axis discomfort value is corrected for time duration and then summed with the noise discomfort value to obtain a total discomfort value.

30 CFR 250.1201 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Subpart L have the following meaning: Allocation meter—a meter used to determine the portion of... heat needed to raise the temperature of one pound of water from 59.5 degrees Fahrenheit (59.5 °F) to 60... nature which prevents you from operating the wells and meters on your OCS facility. Gas lost—gas that is...

49 CFR 192.355 - Customer meters and regulators: Protection from damage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer... terminal must— (1) Be rain and insect resistant; (2) Be located at a place where gas from the vent can... that houses a customer meter or regulator at a place where vehicular traffic is anticipated, must be...

Elbow mass flow meter

DOEpatents

McFarland, Andrew R.; Rodgers, John C.; Ortiz, Carlos A.; Nelson, David C.

1994-01-01

Elbow mass flow meter. The present invention includes a combination of an elbow pressure drop generator and a shunt-type mass flow sensor for providing an output which gives the mass flow rate of a gas that is nearly independent of the density of the gas. For air, the output is also approximately independent of humidity.

76 FR 70473 - Outer Continental Shelf (OCS) Western Planning Area (WPA) Gulf of Mexico (GOM) Oil and Gas Lease...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... period of the lease term for blocks in water depths of 400 meters to less than 1,600 meters, (2) the minimum bonus bid has increased for blocks in water depths of 400 meters or deeper, (3) no deepwater... meters and (2) 400 meters or more. Successful Bidders: The BOEM requires each company that has been...

Psychophysiological Correlates of Reading Dysfunction in Junior College Students with a Long History of Reading Problems.

ERIC Educational Resources Information Center

Reichurdt, Konrad W.; Wilson, John A. R.

This study was undertaken to measure emotional expression as mediated by the automatic nervous system during reading and during other tasks related to school work. Subjects for this research were eight normal readers, reading above the 46th percentile on the Davis Reading Test Form 1-A, used as a control group and sixteen abnormal readers drawn…

Cross-Language Transfer of Word Reading Accuracy and Word Reading Fluency in Spanish-English and Chinese-English Bilinguals: Script-Universal and Script-Specific Processes

ERIC Educational Resources Information Center

Pasquarella, Adrian; Chen, Xi; Gottardo, Alexandra; Geva, Esther

2015-01-01

This study examined cross-language transfer of word reading accuracy and word reading fluency in Spanish-English and Chinese-English bilinguals. Participants included 51 Spanish-English and 64 Chinese-English bilinguals. Both groups of children completed parallel measures of phonological awareness, rapid automatized naming, word reading accuracy,…

Can the Relationship Between Rapid Automatized Naming and Word Reading Be Explained by a Catastrophe? Empirical Evidence From Students With and Without Reading Difficulties.

PubMed

Sideridis, Georgios D; Simos, Panagiotis; Mouzaki, Angeliki; Stamovlasis, Dimitrios; Georgiou, George K

2018-05-01

The purpose of the present study was to explain the moderating role of rapid automatized naming (RAN) in word reading with a cusp catastrophe model. We hypothesized that increases in RAN performance speed beyond a critical point would be associated with the disruption in word reading, consistent with a "generic shutdown" hypothesis. Participants were 587 elementary schoolchildren (Grades 2-4), among whom 87 had reading comprehension difficulties per the IQ-achievement discrepancy criterion. Data were analyzed via a cusp catastrophe model derived from the nonlinear dynamics systems theory. Results indicated that for children with reading comprehension difficulties, as naming speed falls below a critical level, the association between core reading processes (word recognition and decoding) becomes chaotic and unpredictable. However, after the significant common variance attributed to motivation, emotional, and internalizing symptoms measures from RAN scores was partialed out, its role as a bifurcation variable was no longer evident. Taken together, these findings suggest that RAN represents a salient cognitive measure that may be associated with psychoemotional processes that are, at least in part, responsible for unpredictable and chaotic word reading behavior among children with reading comprehension deficits.

Screening for Atrial Fibrillation in Patients ≥65 Years Using an Automatic Blood Pressure Monitor in a Skilled Nursing Facility.

PubMed

Wiesel, Joseph; Salomone, Thomas J

2017-10-15

Early detection of asymptomatic atrial fibrillation (AF) provides an opportunity to treat patients to reduce their risk of stroke. Long-term residents of skilled nursing facilities frequently have multiple risk factors for strokes due to AF and may benefit from screening for AF. Patients in a skilled nursing facility 65 years and older, without a history of AF and without a pacemaker or defibrillator, were evaluated using a Microlife WatchBP Home A automatic blood pressure monitor that can detect AF when set to a triple reading mode. Those with readings positive for AF were evaluated with a standard 12-lead electrocardiogram (ECG) or a 30-second single-channel ECG to confirm the presence of AF. A total of 101 patients were screened with an average age of 78 years, and 48 (48%) were female. Nine automatic blood pressure monitor readings were positive for possible AF. Of those, 7 (6.9%, 95% confidence intervals 3.0% to 14.2%) had AF confirmed with ECG. Only 2 (2%, 95% confidence interval 0.3% to 7.7%) were false-positive readings. One-time screening for AF using an automatic blood pressure monitor in a skilled nursing facility resulted in a high number of patients with newly diagnosed AF. Copyright © 2017 Elsevier Inc. All rights reserved.

47 CFR 2.1511 - Measurements of radiated emissions.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) General set-up instructions. Measurements of radiated electromagnetic emissions (EME) are to be performed... meters in both vertical and horizontal polarization. Record the highest receiver reading in dBm as the... receiver reading in dBm and the instrument settings, antenna height and direction for maximum radiation...

The Relationships among Cognitive Correlates and Irregular Word, Non-Word, and Word Reading

ERIC Educational Resources Information Center

Abu-Hamour, Bashir; University, Mu'tah; Urso, Annmarie; Mather, Nancy

2012-01-01

This study explored four hypotheses: (a) the relationships among rapid automatized naming (RAN) and processing speed (PS) to irregular word, non-word, and word reading; (b) the predictive power of various RAN and PS measures, (c) the cognitive correlates that best predicted irregular word, non-word, and word reading, and (d) reading performance of…

Multicomponent Treatment of Rapid Naming, Reading Rate, and Visual Attention in Single and Double Deficit Dyslexics

ERIC Educational Resources Information Center

Johnson, Kary A.

2013-01-01

While the relationship between rapid automatic naming (RAN) deficiencies and dyslexia (reading disability) is well developed and supported in the behavioral and medical research literature to date, direct treatment of the specific RAN deficiency in addition to subsequently poor reading outcomes in the lexical skill of reading rate and the…

Phonological Processing and Word Reading in Typically Developing and Reading Disabled Children: Severity Matters

ERIC Educational Resources Information Center

de Groot, Barry J. A.; van den Bos, Kees P.; Minnaert, Alexander E. M. G.; van der Meulen, Bieuwe F.

2015-01-01

In this study word reading (WR) fluency was used to dichotomously classify 1,598 Dutch children at different cutoffs, indicating (very) poor or (very) good reading performance. Analysis of variance and receiver operating characteristics were used to investigate the effects of rapid automatized naming (RAN) and phonemic awareness (PA) in predicting…

Word-Related N170 Responses to Implicit and Explicit Reading Tasks in Neoliterate Adults

ERIC Educational Resources Information Center

Sánchez-Vincitore, Laura V.; Avery, Trey; Froud, Karen

2018-01-01

The present study addresses word recognition automaticity in Spanish-speaking adults who are neoliterate by assessing the event-related potential N170 for word stimuli. Participants engaged in two reading conditions that vary the degree of attention required for linguistic components of reading: (a) an implicit reading task, in which they detected…

Phonemic Awareness versus Meaning Instruction in Beginning Reading: A Discussion.

ERIC Educational Resources Information Center

Partridge, Susan

Two Schools of thought prominent in reading instruction are: (1) that reading is a language-based skill which requires the reader to have a sound knowledge of phonology and that this knowledge must be at an automatic level of information processing; and (2) that reading problems are the result of being overly attentive to phonetic and orthographic…

40 CFR 1065.248 - Gas divider.

Code of Federal Regulations, 2010 CFR

2010-07-01

... testing. You may use critical-flow gas dividers, capillary-tube gas dividers, or thermal-mass-meter gas... PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.248 Gas divider. (a) Application. You may...

40 CFR 1065.248 - Gas divider.

Code of Federal Regulations, 2012 CFR

2012-07-01

... use a gas divider to blend calibration gases. (b) Component requirements. Use a gas divider that... testing. You may use critical-flow gas dividers, capillary-tube gas dividers, or thermal-mass-meter gas... and CO2 Measurements ...

40 CFR 1065.248 - Gas divider.

Code of Federal Regulations, 2011 CFR

2011-07-01

... use a gas divider to blend calibration gases. (b) Component requirements. Use a gas divider that... testing. You may use critical-flow gas dividers, capillary-tube gas dividers, or thermal-mass-meter gas... and CO2 Measurements ...

40 CFR 1065.248 - Gas divider.

Code of Federal Regulations, 2014 CFR

2014-07-01

... use a gas divider to blend calibration gases. (b) Component requirements. Use a gas divider that... testing. You may use critical-flow gas dividers, capillary-tube gas dividers, or thermal-mass-meter gas... and CO2 Measurements ...

40 CFR 1065.248 - Gas divider.

Code of Federal Regulations, 2013 CFR

2013-07-01

... use a gas divider to blend calibration gases. (b) Component requirements. Use a gas divider that... testing. You may use critical-flow gas dividers, capillary-tube gas dividers, or thermal-mass-meter gas... and CO2 Measurements ...

Is rapid automatized naming related to reading and mathematics for the same reason(s)? A follow-up study from kindergarten to Grade 1.

PubMed

Georgiou, George K; Tziraki, Niki; Manolitsis, George; Fella, Argyro

2013-07-01

We examined (a) what rapid automatized naming (RAN) components (articulation time and/or pause time) predict reading and mathematics ability and (b) what processing skills involved in RAN (speed of processing, response inhibition, working memory, and/or phonological awareness) may explain its relationship with reading and mathematics. A sample of 72 children were followed from the beginning of kindergarten until the end of Grade 1 and were assessed on measures of RAN, general cognitive ability, speed of processing, attention, working memory, phonological awareness, reading, and mathematics. The results indicated that pause time was the critical component in both the RAN-reading and RAN-mathematics relationships and that it shared most of its predictive variance in reading and mathematics with speed of processing and working memory. Our findings further suggested that, unlike the relationship between RAN and reading fluency in Grade 1, there is nothing in the RAN task that is uniquely related to math. Copyright © 2013 Elsevier Inc. All rights reserved.

Reading Fluency and College Readiness

ERIC Educational Resources Information Center

Rasinski, Timothy V.; Chang, Shu-Ching; Edmondson, Elizabeth; Nageldinger, James; Nigh, Jennifer; Remark, Linda; Kenney, Kristen Srsen; Walsh-Moorman, Elizabeth; Yildirim, Kasim; Nichols, William Dee; Paige, David D.; Rupley, William H.

2017-01-01

The Common Core State Standards suggest that an appropriate goal for secondary education is college and career readiness. Previous research has identified reading fluency as a critical component for proficient reading. One component of fluency is word recognition accuracy and automaticity. The present study attempted to determine the word…

Do Dispositional Characteristics Influence Reading? Examining the Impact of Personality on Reading Fluency

ERIC Educational Resources Information Center

Krach, S. Kathleen; McCreery, Michael P.; Loe, Scott A.; Jones, W. Paul

2016-01-01

Previous research demonstrates specific relationships between personality traits and general academic performance. In addition, research studies have demonstrated relationships among personality and variables related to reading fluency (i.e. speed, accuracy, automaticity, and prosody). However, little investigation has examined specific links…

Is a Cerebellar Deficit the Underlying Cause of Reading Disabilities?

ERIC Educational Resources Information Center

Irannejad, Shahrzad; Savage, Robert

2012-01-01

This study investigated whether children with dyslexia differed in their performance on reading, phonological, rapid naming, motor, and cerebellar-related tasks and automaticity measures compared to reading age (RA)-matched and chronological age (CA)-matched control groups. Participants were 51 children attending mainstream English elementary…

An Investigation of Slurry Fuel Combustion.

DTIC Science & Technology

1981-01-01

tit Lil’ sitas wtae f).4 mm ap.art. w w =Q L-1~ rAn Li w > 0 0- - q The propane gas flow rate was metered withi a Matlieson Model 604 rotameter and...controlled by a Harris Model 2515 pressure regulator with an output capacity of 0-0.69 MPa. The flow rate of the iydrog’en gas was metered with a...propane 3nd hydrogen flows were calibrated with a Precision Scientific Companv wet-test meter (2.83 ml/rev). The fuel drops were mounted with a

The accuracy of portable peak flow meters.

PubMed

Miller, M R; Dickinson, S A; Hitchings, D J

1992-11-01

The variability of peak expiratory flow (PEF) is now commonly used in the diagnosis and management of asthma. It is essential for PEF meters to have a linear response in order to obtain an unbiased measurement of PEF variability. As the accuracy and linearity of portable PEF meters have not been rigorously tested in recent years this aspect of their performance has been investigated. The response of several portable PEF meters was tested with absolute standards of flow generated by a computer driven, servo controlled pump and their response was compared with that of a pneumotachograph. For each device tested the readings were highly repeatable to within the limits of accuracy with which the pointer position can be assessed by eye. The between instrument variation in reading for six identical devices expressed as a 95% confidence limit was, on average across the range of flows, +/- 8.5 l/min for the Mini-Wright, +/- 7.9 l/min for the Vitalograph, and +/- 6.4 l/min for the Ferraris. PEF meters based on the Wright meter all had similar error profiles with overreading of up to 80 l/min in the mid flow range from 300 to 500 l/min. This overreading was greatest for the Mini-Wright and Ferraris devices, and less so for the original Wright and Vitalograph meters. A Micro-Medical Turbine meter was accurate up to 400 l/min and then began to underread by up to 60 l/min at 720 l/min. For the low range devices the Vitalograph device was accurate to within 10 l/min up to 200 l/min, with the Mini-Wright overreading by up to 30 l/min above 150 l/min. Although the Mini-Wright, Ferraris, and Vitalograph meters gave remarkably repeatable results their error profiles for the full range meters will lead to important errors in recording PEF variability. This may lead to incorrect diagnosis and bias in implementing strategies of asthma treatment based on PEF measurement.

The accuracy of portable peak flow meters.

PubMed Central

Miller, M R; Dickinson, S A; Hitchings, D J

1992-01-01

BACKGROUND: The variability of peak expiratory flow (PEF) is now commonly used in the diagnosis and management of asthma. It is essential for PEF meters to have a linear response in order to obtain an unbiased measurement of PEF variability. As the accuracy and linearity of portable PEF meters have not been rigorously tested in recent years this aspect of their performance has been investigated. METHODS: The response of several portable PEF meters was tested with absolute standards of flow generated by a computer driven, servo controlled pump and their response was compared with that of a pneumotachograph. RESULTS: For each device tested the readings were highly repeatable to within the limits of accuracy with which the pointer position can be assessed by eye. The between instrument variation in reading for six identical devices expressed as a 95% confidence limit was, on average across the range of flows, +/- 8.5 l/min for the Mini-Wright, +/- 7.9 l/min for the Vitalograph, and +/- 6.4 l/min for the Ferraris. PEF meters based on the Wright meter all had similar error profiles with overreading of up to 80 l/min in the mid flow range from 300 to 500 l/min. This overreading was greatest for the Mini-Wright and Ferraris devices, and less so for the original Wright and Vitalograph meters. A Micro-Medical Turbine meter was accurate up to 400 l/min and then began to underread by up to 60 l/min at 720 l/min. For the low range devices the Vitalograph device was accurate to within 10 l/min up to 200 l/min, with the Mini-Wright overreading by up to 30 l/min above 150 l/min. CONCLUSION: Although the Mini-Wright, Ferraris, and Vitalograph meters gave remarkably repeatable results their error profiles for the full range meters will lead to important errors in recording PEF variability. This may lead to incorrect diagnosis and bias in implementing strategies of asthma treatment based on PEF measurement. PMID:1465746

Tactile Media for the Visually Handicapped.

ERIC Educational Resources Information Center

Diodato, Virgil

New technological developments allow even the most severely visually handicapped person to read print, sense images, and operate calculators and meters. One of these new developments is the Optacon, which converts printed images to vibrations sensed by finger touch, and may be used to read print, handwriting, and calculator displays. Another…

Measuring peak expiratory flow in general practice: comparison of mini Wright peak flow meter and turbine spirometer.

PubMed Central

Jones, K P; Mullee, M A

1990-01-01

OBJECTIVE--To compare measurements of the peak expiratory flow rate taken by the mini Wright peak flow meter and the turbine spirometer. DESIGN--Pragmatic study with randomised order of use of recording instruments. Phase 1 compared a peak expiratory flow type expiration recorded by the mini Wright peak flow meter with an expiration to forced vital capacity recorded by the turbine spirometer. Phase 2 compared peak expiratory flow type expirations recorded by both meters. Reproducibility was assessed separately. SETTING--Routine surgeries at Aldermoor Health Centre, Southampton. SUBJECTS--212 Patients aged 4 to 78 presenting with asthma or obstructive airways disease. Each patient contributed only once to each phase (105 in phase 1, 107 in phase 2), but some entered both phases on separate occasions. Reproducibility was tested on a further 31 patients. MAIN OUTCOME MEASURE--95% Limits of agreement between measurements on the two meters. RESULTS--208 (98%) Of the readings taken by the mini Wright meter were higher than the corresponding readings taken by the turbine spirometer, but the 95% limits of agreement (mean difference (2 SD] were wide (1 to 173 l/min). Differences due to errors in reproducibility were not sufficient to predict this level of disagreement. Analysis by age, sex, order of use, and the type of expiration did not detect any significant differences. CONCLUSIONS--The two methods of measuring peak expiratory flow rate were not comparable. The mini Wright meter is likely to remain the preferred instrument in general practice. PMID:2142611

40 CFR Table W - 7 of Subpart W-Default Methane Emission Factors for Natural Gas Distribution

Code of Federal Regulations, 2012 CFR

2012-07-01

... Valve 0.557 Control Valve 9.34 Pressure Relief Valve 0.27 Orifice Meter 0.212 Regulator 0.772 Open-ended Line 26.131 Population Emission Factors—Below Grade Metering-Regulating station 1 Components, Gas... 100 to 300 psig 0.20 Below Grade M&R Station, Inlet Pressure Population Emission...

77 FR 63537 - Greenhouse Gas Reporting Program: Proposed Amendments and Confidentiality Determinations for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

... consumption. (See Section for ``all flow meters, weigh III.B.6). scales, pressure gauges and thermometers... apportioning consumption. (See Section III.B.8). factors by using direct measurements using gas flow meters or... consumption. Revising 40 CFR 98.94(c)(2)(i) to allow reporters to select a period of the reporting year and...

Asian citrus psyllids and shade: Survival of Diaphorina citri on Murraya exotica foliage exposed to different levels of light

USDA-ARS?s Scientific Manuscript database

Using shade cloths of different densities, potted individuals of Murraya exotica (Rutaceae) were exposed to levels of photosynthetic radiation (PAR) varying from 48 µmol photons per meter2 per second to 1562 µmol photons per meter2 per second (average of three readings taken at noon during condition...

Moisture meter calibrations for untreated and ACQ-treated southern yellow pine lumber and plywood

Treesearch

C.R. Boardman; Samuel V. Glass; Charles G. Carll

2011-01-01

This study investigates the effects of alkaline copper quaternary (ACQ) preservative treatment and of plywood glue lines on resistance-based moisture content (MC) measurements. Moisture meter readings using stainless steel screws as electrodes were acquired over a range of moisture conditions in Southern Yellow Pine (SYP) lumber and plywood. Calibration equations are...

The Relations among L1 (Spanish) Literacy Skills, L2 (English) Language, L2 Text Reading Fluency, and L2 Reading Comprehension for Spanish-Speaking ELL First Grade Students

ERIC Educational Resources Information Center

Kim, Young-Suk

2012-01-01

We investigated the relations of L2 (i.e., English) oral reading fluency, silent reading fluency, word reading automaticity, oral language skills, and L1 literacy skills (i.e., Spanish) to L2 reading comprehension for Spanish-speaking English language learners in the first grade (N = 150). An analysis was conducted for the entire sample as well as…

Genital automatisms: Reappraisal of a remarkable but ignored symptom of focal seizures.

PubMed

Dede, Hava Özlem; Bebek, Nerses; Gürses, Candan; Baysal-Kıraç, Leyla; Baykan, Betül; Gökyiğit, Ayşen

2018-03-01

Genital automatisms (GAs) are uncommon clinical phenomena of focal seizures. They are defined as repeated fondling, grabbing, or scratching of the genitals. The aim of this study was to determine the lateralizing and localizing value and associated clinical characteristics of GAs. Three hundred thirteen consecutive patients with drug-resistant seizures who were referred to our tertiary center for presurgical evaluation between 2009 and 2016 were investigated. The incidence of specific kinds of behavior, clinical semiology, associated symptoms/signs with corresponding ictal electroencephalography (EEG) findings, and their potential role in seizure localization and lateralization were evaluated. Fifteen (4.8%) of 313 patients had GAs. Genital automatisms were identified in 19 (16.4%) of a total 116 seizures. Genital automatisms were observed to occur more often in men than in women (M/F: 10/5). Nine of fifteen patients (60%) had temporal lobe epilepsy (right/left: 4/5) and three (20%) had frontal lobe epilepsy (right/left: 1/2), whereas the remaining two patients could not be classified. One patient was diagnosed as having Rasmussen encephalitis. Genital automatisms were ipsilateral to epileptic focus in 12 patients and contralateral in only one patient according to ictal-interictal EEG and neuroimaging findings. Epileptic focus could not be lateralized in the last 2 patients. Genital automatisms were associated with unilateral hand automatisms such as postictal nose wiping or manual automatisms in 13 (86.7%) of 15 and contralateral dystonia was seen in 6 patients. All patients had amnesia of the performance of GAs. Genital automatisms are more frequent in seizures originating from the temporal lobe, and they can also be seen in frontal lobe seizures. Genital automatisms seem to have a high lateralizing value to the ipsilateral hemisphere and are mostly concordant with other unilateral hand automatisms. Men exhibit GAs more often than women. Copyright © 2017 Elsevier Inc. All rights reserved.

Predictors of Reading in Urdu: Does Deep Orthography Have an Impact?

PubMed Central

Farukh, Ammara; Vulchanova, Mila

2014-01-01

The aim of this study was to establish the extent to which rapid automatized naming (RAN) and non-word repetition (NWR) tasks predict reading fluency and reading accuracy in Urdu. One hundred sixty (8–9 years) children attending two types of schools (Urdu and English medium schools) were distributed into two groups, a control and a reading disability group on the basis of teacher’s report. The results confirmed the role of RAN in predicting reading fluency in both groups. The role of NWR as a predictor of accuracy was also confirmed, although the strength of the relationship was modulated by RAN in the reading disability group. There are no tests available to identify children with reading problems in Urdu. Our study supports the validity of NWR and RAN tasks for the purposes of screening for reading deficits. The performance results also confirm the original grouping based on teacher reports. The study further highlights the importance of medium of instruction and increased oral language input in learning to read. © 2014 The Authors. Dyslexia published by John Wiley & Sons Ltd. Key Messages Reliability of teacher reports in screening for reading difficulties in the classroom. Appropriateness of non-word repetition and rapid automatized naming tasks for establishing reading problems in Urdu. School type and exposure to instruction influences reading skills. PMID:24664499

Predicting Third Grade Reading Success from Kindergarten Phonological Awareness

ERIC Educational Resources Information Center

Robinson, Stephanie J.

2013-01-01

Although phonological awareness (PA) is an essential preliteracy skill with well-established predictive validity for elementary school reading success, previous research indicates that PA intervention does not demonstrate long term effects on reading. The theory of automaticity was the underlying foundation used to understand the importance of…

Considering the Context and Texts for Fluency: Performance, Readers Theater, and Poetry

ERIC Educational Resources Information Center

Young, Chase; Nageldinger, James

2014-01-01

This article describes the importance of teaching reading fluency and all of its components, including automaticity and prosody. The authors explain how teachers can create a context for reading fluency instruction by engaging students in reading performance activities. To support the instructional contexts, the authors suggest particular…

Rapid Word Recognition as a Measure of Word-Level Automaticity and Its Relation to Other Measures of Reading

ERIC Educational Resources Information Center

Frye, Elizabeth M.; Gosky, Ross

2012-01-01

The present study investigated the relationship between rapid recognition of individual words (Word Recognition Test) and two measures of contextual reading: (1) grade-level Passage Reading Test (IRI passage) and (2) performance on standardized STAR Reading Test. To establish if time of presentation on the word recognition test was a factor in…

Effects of sequential and discrete rapid naming on reading in Japanese children with reading difficulty.

PubMed

Wakamiya, Eiji; Okumura, Tomohito; Nakanishi, Makoto; Takeshita, Takashi; Mizuta, Mekumi; Kurimoto, Naoko; Tamai, Hiroshi

2011-06-01

To clarify whether rapid naming ability itself is a main underpinning factor of rapid automatized naming tests (RAN) and how deep an influence the discrete decoding process has on reading, we performed discrete naming tasks and discrete hiragana reading tasks as well as sequential naming tasks and sequential hiragana reading tasks with 38 Japanese schoolchildren with reading difficulty. There were high correlations between both discrete and sequential hiragana reading and sentence reading, suggesting that some mechanism which automatizes hiragana reading makes sentence reading fluent. In object and color tasks, there were moderate correlations between sentence reading and sequential naming, and between sequential naming and discrete naming. But no correlation was found between reading tasks and discrete naming tasks. The influence of rapid naming ability of objects and colors upon reading seemed relatively small, and multi-item processing may work in relation to these. In contrast, in the digit naming task there was moderate correlation between sentence reading and discrete naming, while no correlation was seen between sequential naming and discrete naming. There was moderate correlation between reading tasks and sequential digit naming tasks. Digit rapid naming ability has more direct effect on reading while its effect on RAN is relatively limited. The ratio of how rapid naming ability influences RAN and reading seems to vary according to kind of the stimuli used. An assumption about components in RAN which influence reading is discussed in the context of both sequential processing and discrete naming speed. Copyright © 2010 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Geophysical observations at cavity collapse

NASA Astrophysics Data System (ADS)

Jousset, Philippe; Bazargan-Sabet, Behrooz; Lebert, François; Bernardie, Séverine; Gourry, Jean-Christophe

2010-05-01

In Lorraine region (France) salt layers at about 200 meters depth are exploited by Solvay using solution mining methodology which consists in extracting the salt by dissolution, collapsing the cavern overburden during the exploitation phase and finally reclaiming the landscape by creating a water area. In this process, one of the main challenges for the exploiting company is to control the initial 120-m diameter collapse so as to minimize possible damages. In order to detect potential precursors and understand processes associated with such collapses, a wide series of monitoring techniques including micro seismics, broad-band seismology, hydro-acoustic, electromagnetism, gas probing, automatic leveling, continuous GPS, continuous gravity and borehole extensometry was set-up in the frame of an in-situ study carried out by the "Research Group for the Impact and Safety of Underground Works" (GISOS, France). Equipments were set-up well before the final collapse, giving a unique opportunity to analyze a great deal of information prior to and during the collapse process which has been successfully achieved on February the 13th, 2009 by controlling the cavity internal pressure. In this work, we present the results of data recorded by a network of 3 broadband seismometers, 2 accelerometers, 2 tilt-meters and a continuously gravity meter. We relate the variations of the brine pumping rate with the evolutions of the induced geophysical signals and finally we propose a first mechanical model for describing the controlled collapse. Beyond the studied case, extrapolation of the results obtained might contribute to the understanding of uncontrolled cavity collapses, such as pit-craters or calderas at volcanoes.

Computer assisted operations in Petroleum Development Oman (PDO)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Hinai, S.H.; Mutimer, K.

1995-10-01

Petroleum Development Oman (PDO) currently produces some 750,000 bopd and 900,000 bwpd from some 74 fields in a large geographical area and diverse operating conditions. A key corporate objective is to reduce operating costs by exploiting productivity gains from proven technology. Automation is seen as a means of managing the rapid growth of well population and production facilities. the overall objective is to improve field management through continuous monitoring of wells and facilities and dissemination of data throughout the whole organization. A major upgrade of PDO`s field Supervisory Control and Data Acquisition (SCADA) system is complete providing a platform tomore » exploit new initiatives particularly for production optimization of artificial lift systems and automatic well testing using multi selector valves, coriolis flow meter measurements and multi component (oil, gas, water) flowmeter. The paper describes PDO`s experience including benefits and challenges which have to be managed when developing Computer Assisted Operations (CAO).« less

78 FR 9420 - Central Gulf of Mexico Planning Area (CPA) Outer Continental Shelf (OCS) Oil and Gas Lease Sale 227

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... less than 400 meters. $100.00 per acre or fraction thereof for blocks in water depths of 400 meters or... less than 400 meters, and $100.00 per acre or fraction thereof for blocks in water depths of 400 meters... leases in 0 to less than 400 meters of water depth completed to a drilling depth of 20,000 feet TVD SS or...

75 FR 6874 - Outer Continental Shelf (OCS) Central Planning Area (CPA) Gulf of Mexico (GOM) Oil and Gas Lease...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-12

... for blocks in water depths of 400 meters to less than 1,600 meters. Blocks in 400 to less than 800... resulting from this lease sale. Leases in water depths of 400 meters to less than 800 meters will be offered... still may require the full 10-year term. In both the 400-800 and 800-1,600 meter cases, the lease...

Automatic calibration system for analog instruments based on DSP and CCD sensor

NASA Astrophysics Data System (ADS)

Lan, Jinhui; Wei, Xiangqin; Bai, Zhenlong

2008-12-01

Currently, the calibration work of analog measurement instruments is mainly completed by manual and there are many problems waiting for being solved. In this paper, an automatic calibration system (ACS) based on Digital Signal Processor (DSP) and Charge Coupled Device (CCD) sensor is developed and a real-time calibration algorithm is presented. In the ACS, TI DM643 DSP processes the data received by CCD sensor and the outcome is displayed on Liquid Crystal Display (LCD) screen. For the algorithm, pointer region is firstly extracted for improving calibration speed. And then a math model of the pointer is built to thin the pointer and determine the instrument's reading. Through numbers of experiments, the time of once reading is no more than 20 milliseconds while it needs several seconds if it is done manually. At the same time, the error of the instrument's reading satisfies the request of the instruments. It is proven that the automatic calibration system can effectively accomplish the calibration work of the analog measurement instruments.

Prosody's Contribution to Fluency: An Examination of the Theory of Automatic Information Processing

ERIC Educational Resources Information Center

Schrauben, Julie E.

2010-01-01

LaBerge and Samuels' (1974) theory of automatic information processing in reading offers a model that explains how and where the processing of information occurs and the degree to which processing of information occurs. These processes are dependent upon two criteria: accurate word decoding and automatic word recognition. However, LaBerge and…

Relationships among Rapid Digit Naming, Phonological Processing, Motor Automaticity, and Speech Perception in Poor, Average, and Good Readers and Spellers

ERIC Educational Resources Information Center

Savage, Robert S.; Frederickson, Norah; Goodwin, Roz; Patni, Ulla; Smith, Nicola; Tuersley, Louise

2005-01-01

In this article, we explore the relationship between rapid automatized naming (RAN) and other cognitive processes among below-average, average, and above-average readers and spellers. Nonsense word reading, phonological awareness, RAN, automaticity of balance, speech perception, and verbal short-term and working memory were measured. Factor…

Advanced smoke meter development survey and analysis

NASA Technical Reports Server (NTRS)

Pitz, R. W.; Penney, C. M.; Stanforth, C. M.; Shaffernocker, W. M.

1984-01-01

Ideal smoke meter characteristics are determined to provide a basis for evaluation of candidate systems. Five promising techniques are analyzed in detail to evaluate compilance with the practical smoke meter requirements. Four of the smoke measurement concepts are optical methods: Modulated Transmission (MODTRAN), Cross Beam Absorption Counter (CBAC), Laser Induced Incandescence (LIN), and Photoacoustic Spectroscopy (PAS). A rapid response filter instrument called a Taper Element Oscillating Microbalance (TEOM) is also evaluated. For each technique, the theoretical principles are described, the expected performance is determined, and the advantages and disadvantages are discussed The expected performance is evaluated against each of the smoke meter specifications, and the key questions for further study are given. The most promising smoke meter technique analyzed was MODTRAN, which is a variation on a direct transmission measurement. The soot-laden gas is passed through a transmission cell, and the gas pressure is modulated by a speaker.

Clinical evidence of the role of the cerebellum in the suppression of overt articulatory movements during reading. A study of reading in children and adolescents treated for cerebellar pilocytic astrocytoma.

PubMed

Ait Khelifa-Gallois, N; Puget, S; Longaud, A; Laroussinie, F; Soria, C; Sainte-Rose, C; Dellatolas, G

2015-04-01

It has been suggested that the cerebellum is involved in reading acquisition and in particular in the progression from automatic grapheme-phoneme conversion to the internalization of speech required for silent reading. This idea is in line with clinical and neuroimaging data showing a cerebellar role in subvocal rehearsal for printed verbalizable material and with computational "internal models" of the cerebellum suggesting its role in inner speech (i.e. covert speech without mouthing the words). However, studies examining a possible cerebellar role in the suppression of articulatory movements during silent reading acquisition in children are lacking. Here, we report clinical evidence that the cerebellum plays a part in this transition. Reading performances were compared between a group of 17 paediatric patients treated for benign cerebellar tumours and a group of controls matched for age, gender, and parental socio-educational level. The patients scored significantly lower on all reading, but the most striking difference concerned silent reading, perfectly acquired by almost all controls, contrasting with 41 % of the patients who were unable to read any item silently. Silent reading was correlated with the Working Memory Index. The present findings converge with previous reports on an implication of the cerebellum in inner speech and in the automatization of reading. This cerebellar implication is probably not specific to reading, as it also seems to affect non-reading tasks such as counting.

Accent on Meter: A Handbook for Readers of Poetry

ERIC Educational Resources Information Center

Powell, Joseph; Halperin, Mark

2004-01-01

This book offers practical ways of teaching students about the close connections between the meaning, rhythm, and meter in poetry. The major assumption of the book is that a close reading of a poem--one that explores the nuances of structure--can increase one's appreciation and enjoyment of poetry. In the words of the authors, "What the poem is…

Hey you! Shut the refrigerator door!

NASA Astrophysics Data System (ADS)

Fay, Sarah; Portenga, Angela

1998-09-01

The note discusses electrical power and energy and includes possible labs to be used in a physics classroom. It is based on our experimentation with a new device called the Watt-Watt/Hour Meter, which displays instantaneous power and cumulative energy readings of household electrical devices. Our experiments utilized this meter in conjunction with various appliances and focused primarily on its use with a refrigerator.

Non-contact ultrasonic gas flow metering using air-coupled leaky Lamb waves.

PubMed

Fan, Zichuan; Jiang, Wentao; Wright, William M D

2018-04-23

This paper describes a completely non-contact ultrasonic method of gas flow metering using air-coupled leaky Lamb waves. To show proof of principle, a simplified representation of gas flow in a duct, comprising two separated thin isotropic plates with a gas flowing between them, has been modelled and investigated experimentally. An airborne compression wave emitted from an air-coupled capacitive ultrasonic transducer excited a leaky Lamb wave in the first plate in a non-contact manner. The leakage of this Lamb wave crossed the gas flow at an angle between the two plates as a compression wave, and excited a leaky Lamb wave in the second plate. An air-coupled capacitive ultrasonic transducer on the opposite side of this second plate then detected the airborne compression wave leakage from the second Lamb wave. As the gas flow shifted the wave field between the two plates, the point of Lamb wave excitation in the second plate was displaced in proportion to the gas flow rate. Two such measurements, in opposite directions, formed a completely non-contact contra-propagating Lamb wave flow meter, allowing measurement of the flow velocity between the plates. A COMSOL Multiphysics® model was used to visualize the wave fields, and accurately predicted the time differences that were then measured experimentally. Experiments using different Lamb wave frequencies and plate materials were also similarly verified. This entirely non-contact airborne approach to Lamb wave flow metering could be applied in place of clamp-on techniques in thin-walled ducts or pipes. Copyright © 2018 Elsevier B.V. All rights reserved.

Raman lidar for hydrogen gas concentration monitoring and future radioactive waste management.

PubMed

Liméry, Anasthase; Cézard, Nicolas; Fleury, Didier; Goular, Didier; Planchat, Christophe; Bertrand, Johan; Hauchecorne, Alain

2017-11-27

A multi-channel Raman lidar has been developed, allowing for the first time simultaneous and high-resolution profiling of hydrogen gas and water vapor. The lidar measures vibrational Raman scattering in the UV (355 nm) domain. It works in a high-bandwidth photon counting regime using fast SiPM detectors and takes into account the spectral overlap between hydrogen and water vapor Raman spectra. Measurement of concentration profiles of H 2 and H 2 O are demonstrated along a 5-meter-long open gas cell with 1-meter resolution at 85 meters. The instrument precision is investigated by numerical simulation to anticipate the potential performance at longer range. This lidar could find applications in the French project Cigéo for monitoring radioactive waste disposal cells.

Transformation and Self-Similarity Properties of Gamma and Weibull Fragment Size Distributions

DTIC Science & Technology

2015-12-01

spray formed when a fast gas stream blows over a liquid volume.” As a theoretical justification, they showed that Gamma size distributions are...of Fracture, 140, 243, 2006 P.-K. Wu, G. A. Ruff, and G. M. Faeth, Primary Breakup in Liquid - Gas Mixing Layers, Atomization and Sprays, 1, 421-440...103 meter (m) barn (b) 1 × 10–28 square meter (m2) gallon (gal, U.S. liquid ) 3.785 412 × 10–3 cubic meter (m3) cubic foot (ft3) 2.831 685 × 10–2

[Usefulness and limitations of rapid automatized naming to predict reading difficulties after school entry in preschool children].

PubMed

Kaneko, Masato; Uno, Akira; Haruhara, Noriko; Awaya, Noriko

2012-01-01

We investigated the usability and limitations of Rapid Automatized Naming (RAN) results in 6-year-old Japanese preschool children to estimate whether reading difficulties will be encountered after school entry. We administered a RAN task to 1,001 preschool children. Then after they had entered school, we performed follow-up surveys yearly to assess their reading performance when these children were in the first, second, third and fourth grades. Also, we examined Hiragana non-words and Kanji words at each time point to detect the children who were having difficulty with reading Hiragana and Kanji. Results by Receiver Operating Characteristic analysis showed that the RAN result in 6-year-old preschool children was predictive of Kanji reading difficulty in the lower grades of elementary school, especially in the second grade with a probability of 0.86, and the area under the curve showed a probability of 0.84 in the third grade. These results suggested that the RAN task was useful as a screening tool.

Automaticity in reading and the Stroop task: testing the limits of involuntary word processing.

PubMed

Brown, Tracy L; Joneleit, Kelly; Robinson, Cathy S; Brown, Carli Rose

2002-01-01

We investigated the parameters of involuntary word reading in the Stroop task in 7 experiments. Experiments 1-4 varied response modality and the presence of congruent word trials in a test of the claim that presenting a Stroop color word with only one letter in the target color eliminates the Stroop effect. Experiments 5 and 6 addressed the roles of spatial attention and orthographic processing as possible mechanisms behind the reduction of Stroop effects with the single-letter format. Experiment 7 investigated the limits of involuntary reading under optimal conditions for selective processing of rectangular color patch targets. We found that the single-letter format reduced but never eliminated Stroop effects, spatial attention but not orthographic processing plays a role in the effect of the single-letter format, and word reading is not completely prevented even with austere presentation conditions. We conclude with a defense of the involuntariness criterion for automaticity in the Stroop task, particularly when word reading is viewed in the context of a skilled performance.

12 Texts That Facilitate Authentic Reading Strategies for Novice, Experimenting, and Proficient Readers

ERIC Educational Resources Information Center

Hill, K. Dara

2017-01-01

The current climate of reading instruction calls for fluency strategies that stress automaticity, accuracy, and prosody, within the scope of prescribed reading programs that compromise teacher autonomy, with texts that are often irrelevant to the students' experiences. Consequently, accuracy and speed are developed, but deep comprehension is…

Validation of Automated Scoring of Oral Reading

ERIC Educational Resources Information Center

Balogh, Jennifer; Bernstein, Jared; Cheng, Jian; Van Moere, Alistair; Townshend, Brent; Suzuki, Masanori

2012-01-01

A two-part experiment is presented that validates a new measurement tool for scoring oral reading ability. Data collected by the U.S. government in a large-scale literacy assessment of adults were analyzed by a system called VersaReader that uses automatic speech recognition and speech processing technologies to score oral reading fluency. In the…

Reading in EFL: Facts and Fictions.

ERIC Educational Resources Information Center

Paran, Amos

1996-01-01

Examines the representation of the reading process in English as a Foreign Language (EFL) texts. The article argues that many of these representations are dated and based on a theory that was never a mainstream theory of first-language reading. Suggestions for exercises to strengthen automatic word recognition in EFL readers are provided. (33…

Effects of Mora Deletion, Nonword Repetition, Rapid Naming, and Visual Search Performance on Beginning Reading in Japanese

ERIC Educational Resources Information Center

Kobayashi, Maya Shiho; Haynes, Charles W.; Macaruso, Paul; Hook, Pamela E.; Kato, Junko

2005-01-01

This study examined the extent to which mora deletion (phonological analysis), nonword repetition (phonological memory), rapid automatized naming (RAN), and visual search abilities predict reading in Japanese kindergartners and first graders. Analogous abilities have been identified as important predictors of reading skills in alphabetic languages…

Instrumentation Engineers Handbook

DTIC Science & Technology

2013-01-01

5.9 Turbine Flowmeters ..................................................................................... 5-43 5.9.1 Design and construction...variations .............................................................. 5-44 5.9.2 Turbine meter accuracy...5-46 5.9.5 Gas turbine and shunt meters

Application program of CRUST-1 10km continental scientific drilling rig in SK-2 scientific drilling well

NASA Astrophysics Data System (ADS)

Sun, Youhong; Gao, Ke; Yu, Ping; Liu, Baochang; Guo, Wei; Ma, Yinlong; Yang, Yang

2014-05-01

SK-2 Well is located in DaQing city,where is site of the largest oil field in China,Heilongjiang province, north-east of China.The objective of SK-2 well is to obtain full cores of cretaceous formation in Song Liao basin,and to build the time tunnel of Cretaceous greenhouse climate change,and to clarify the causes,processes and results of the formations of DaQing oil field. This will ensure to achieve our ultimate goals,to test the CRUST-1 drilling rig and improve China's deep scientific drilling technology,to form the scientific drilling technology,method and system with independent intellectual property rights,and to provide technical knowledge and information for China's ten kilometers super-deep scientific drilling technical resources.SK-2 Well is at 6400 meter depth, where the drilling inclination is 90 degree and the continuous coring length is 3535 meter that from 2865 to 6400 meter,the recovery rate of the core is greater or equal to 95 percent with 100 millimeters core diameter and 3.9 degree per 100 meter geothermal gradient.The CRUST-1 rig is designated with special drilling equipment for continental scientific drilling combined to the oil drilling equipment ability with advanced geological drilling technology which is highly automatic and intelligent. CRUST-1 drilling ability is 10000 meter with the maximum hook load 700 tons, the total power is 4610 Kilowatt.CRUST-1 will be integrated with a complete set of automation equipment,including big torque hydraulic top drive,high accuracy automatic drilling rod feeding system, suspended automatic drill string discharge device,hydraulic intelligent iron roughneck,and hydraulic automatic catwalk to fully meet the drilling process requirements of SK-2.Designed with advanced drilling technique for 260 degree in the bottom of SK-2 well and hard rock,including the drilling tools of high temperature hydraulic hammer,high temperature resistance and high strength aluminum drill pipe,high temperature preparation of mud treatment and high temperature resistant cementing materials, and bionic bits,that is coupling bionic PDC tooth bit and diamond-impregnated bit for hard rock.All parts of CRUST-1 were successfully assembled along with the derrick and base lift and transported about 3456 kilometers from manufacture,GuangHan city in southwest China's Sichuan province,to the well site of SK-2 in end of 2013.SK-2 will be finished during next 4 years.

Gas flow meter and method for measuring gas flow rate

DOEpatents

Robertson, Eric P.

2006-08-01

A gas flow rate meter includes an upstream line and two chambers having substantially equal, fixed volumes. An adjustable valve may direct the gas flow through the upstream line to either of the two chambers. A pressure monitoring device may be configured to prompt valve adjustments, directing the gas flow to an alternate chamber each time a pre-set pressure in the upstream line is reached. A method of measuring the gas flow rate measures the time required for the pressure in the upstream line to reach the pre-set pressure. The volume of the chamber and upstream line are known and fixed, thus the time required for the increase in pressure may be used to determine the flow rate of the gas. Another method of measuring the gas flow rate uses two pressure measurements of a fixed volume, taken at different times, to determine the flow rate of the gas.

MISR Toolkit

Atmospheric Science Data Center

2018-03-14

... which makes it very easy to extract and use MISR data sets. Reading a parameter requires the user to simply specify a file, grid, field, ... Automatically stitch, unpack and unscale MISR data while reading Performing coordinate conversions between lat/lon, SOM x/y, ...

Programmatic Environmental Assessment, 2007 General Plan for the Main Cantonment and the South Base Cantonment at Vandenberg Air Force Base, California

DTIC Science & Technology

2008-05-05

one meter Diesel truck at 15 meters; noisy urban daytime 70 – 80 Shouting at one meter; vacuum cleaner at three meters Gas lawnmower at 30 meters 60...leaders during the Cold War. Since the National Aeronautics and Space Administration ( NASA ) was established in 1958, the civilian space program has...the Operation of Highly Technical or Scientific Facilities, specifically refers to the many active NASA and U.S. Air Force launch complexes that have

Unlocking Short Read Sequencing for Metagenomics

DOE PAGES

Rodrigue, Sébastien; Materna, Arne C.; Timberlake, Sonia C.; ...

2010-07-28

We describe an experimental and computational pipeline yielding millions of reads that can exceed 200 bp with quality scores approaching that of traditional Sanger sequencing. The method combines an automatable gel-less library construction step with paired-end sequencing on a short-read instrument. With appropriately sized library inserts, mate-pair sequences can overlap, and we describe the SHERA software package that joins them to form a longer composite read.

Does the Relation between Rapid Automatized Naming and Reading Depend on Age or on Reading Level? A Behavioral and ERP Study

PubMed Central

Cohen, Marjolaine; Mahé, G.; Laganaro, Marina; Zesiger, Pascal

2018-01-01

Reading predictors evolve through age: phonological awareness is the best predictor of reading abilities at the beginning of reading acquisition while Rapid Automatized Naming (RAN) becomes the best reading predictor in more experienced readers (around 9–10 years old). Those developmental changes in the relationship between RAN and reading have so far been explained in term of participants' age. However, it should be noted that in the previous experiments age always co-vary with participants reading level. It is thus not clear whether RAN-reading relationship is developmental in nature or related to the reading system itself. This study investigates whether the behavioral changes in the relationship between RAN and reading and their electrophysiological correlates are related to the chronological age or to the reading level of the participants. Thirty two French-speaking children aged 7–10 years took part to the experiment: they were divided into groups contrasted on age but with similar reading levels and the other way round. Participants performed two reading tasks and four RAN tasks. EEG/ERP was recorded during discrete letter and picture RAN. Behavioral results revealed that alphanumeric RAN is more sensitive to age variations than reading level differences. The inverse profile was revealed for picture RAN, which discriminate poor and good readers among typically developed children within the same age-group. ERPs of both letter and picture RAN differed across age groups whereas only for the picture RAN ERPs differed across reading levels. Taken together, these results suggest that picture RAN is a particularly good indicator of reading level variance independently of age. PMID:29520226

Ambiguity effects of rhyme and meter.

PubMed

Wallot, Sebastian; Menninghaus, Winfried

2018-04-23

Previous research has shown that rhyme and meter-although enhancing prosodic processing ease and memorability-also tend to make semantic processing more demanding. Using a set of rhymed and metered proverbs, as well as nonrhymed and nonmetered versions of these proverbs, the present study reveals this hitherto unspecified difficulty of comprehension to be specifically driven by perceived ambiguity. Roman Jakobson was the 1st to propose this hypothesis, in 1960. He suggested that "ambiguity is an intrinsic, inalienable feature" of "parallelistic" diction of which the combination of rhyme and meter is a pronounced example. Our results show that ambiguity indeed explains a substantial portion of the rhyme- and meter-driven difficulty of comprehension. Longer word-reading times differentially reflected ratings for ambiguity and comprehension difficulty. However, the ambiguity effect is not "inalienable." Rather, many rhymed and metered sentences turned out to be low in ambiguity. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Application of Classification Methods for Forecasting Mid-Term Power Load Patterns

NASA Astrophysics Data System (ADS)

Piao, Minghao; Lee, Heon Gyu; Park, Jin Hyoung; Ryu, Keun Ho

Currently an automated methodology based on data mining techniques is presented for the prediction of customer load patterns in long duration load profiles. The proposed approach in this paper consists of three stages: (i) data preprocessing: noise or outlier is removed and the continuous attribute-valued features are transformed to discrete values, (ii) cluster analysis: k-means clustering is used to create load pattern classes and the representative load profiles for each class and (iii) classification: we evaluated several supervised learning methods in order to select a suitable prediction method. According to the proposed methodology, power load measured from AMR (automatic meter reading) system, as well as customer indexes, were used as inputs for clustering. The output of clustering was the classification of representative load profiles (or classes). In order to evaluate the result of forecasting load patterns, the several classification methods were applied on a set of high voltage customers of the Korea power system and derived class labels from clustering and other features are used as input to produce classifiers. Lastly, the result of our experiments was presented.

A review of automatic patient identification options for public health care centers with restricted budgets.

PubMed

García-Betances, Rebeca I; Huerta, Mónica K

2012-01-01

A comparative review is presented of available technologies suitable for automatic reading of patient identification bracelet tags. Existing technologies' backgrounds, characteristics, advantages and disadvantages, are described in relation to their possible use by public health care centers with budgetary limitations. A comparative assessment is presented of suitable automatic identification systems based on graphic codes, both one- (1D) and two-dimensional (2D), printed on labels, as well as those based on radio frequency identification (RFID) tags. The analysis looks at the tradeoffs of these technologies to provide guidance to hospital administrator looking to deploy patient identification technology. The results suggest that affordable automatic patient identification systems can be easily and inexpensively implemented using 2D code printed on low cost bracelet labels, which can then be read and automatically decoded by ordinary mobile smart phones. Because of mobile smart phones' present versatility and ubiquity, the implantation and operation of 2D code, and especially Quick Response® (QR) Code, technology emerges as a very attractive alternative to automate the patients' identification processes in low-budget situations.

A Review of Automatic Patient Identification Options for Public Health Care Centers with Restricted Budgets

PubMed Central

García-Betances, Rebeca I.; Huerta, Mónica K.

2012-01-01

A comparative review is presented of available technologies suitable for automatic reading of patient identification bracelet tags. Existing technologies’ backgrounds, characteristics, advantages and disadvantages, are described in relation to their possible use by public health care centers with budgetary limitations. A comparative assessment is presented of suitable automatic identification systems based on graphic codes, both one- (1D) and two-dimensional (2D), printed on labels, as well as those based on radio frequency identification (RFID) tags. The analysis looks at the tradeoffs of these technologies to provide guidance to hospital administrator looking to deploy patient identification technology. The results suggest that affordable automatic patient identification systems can be easily and inexpensively implemented using 2D code printed on low cost bracelet labels, which can then be read and automatically decoded by ordinary mobile smart phones. Because of mobile smart phones’ present versatility and ubiquity, the implantation and operation of 2D code, and especially Quick Response® (QR) Code, technology emerges as a very attractive alternative to automate the patients’ identification processes in low-budget situations. PMID:23569629

Predicting Reading in Vowelized and Unvowelized Arabic Script: An Investigation of Reading in First and Second Grades

ERIC Educational Resources Information Center

Asadi, Ibrahim A.; Khateb, Asaid

2017-01-01

This study examined the orthographic transparency of Arabic by investigating the contribution of phonological awareness (PA), vocabulary, and Rapid Automatized Naming (RAN) to reading vowelized and unvowelized words. The results from first and second grade children showed that PA contribution was similar in the vowelized and unvowelized…

N170 Visual Word Specialization on Implicit and Explicit Reading Tasks in Spanish Speaking Adult Neoliterates

ERIC Educational Resources Information Center

Sanchez, Laura V.

2014-01-01

Adult literacy training is known to be difficult in terms of teaching and maintenance (Abadzi, 2003), perhaps because adults who recently learned to read in their first language have not acquired reading automaticity. This study examines fast word recognition process in neoliterate adults, to evaluate whether they show evidence of perceptual…

Applying a Reading Program Based on Cognitive Science in Rural Areas of Malawi: Preliminary Results

ERIC Educational Resources Information Center

Iyengar, Radhika; Karim, Alia; Chagwira, Florie

2016-01-01

Reading fluency is a skill foundational to academic performance, and acquiring this skill in early grades is crucial. Throughout sub-Saharan Africa, reading levels of students are far below grade level, and Malawi is no exception. Research suggests that students, particularly in consistently spelled languages, acquire automaticity most easily by…

Pathways to Third-Grade Calculation versus Word-Reading Competence: Are They More Alike or Different?

ERIC Educational Resources Information Center

Fuchs, Lynn S.; Geary, David C.; Fuchs, Douglas; Compton, Donald L.; Hamlett, Carol L.

2016-01-01

Children (n = 747; 6.5 years) were assessed on domain-general processes and mathematics and reading-related competencies (start of first grade), addition retrieval (end of second grade), and calculations and word reading (end of third grade). Attentive behavior, reasoning, visuospatial memory, and rapid automatized naming (RAN) indirectly…

The Relationship Between Reading Fluency and Vocabulary in Fifth Grade Turkish Students

ERIC Educational Resources Information Center

Yildirim, Kasim; Rasinski, Timothy; Ates, Seyit; Fitzgerald, Shawn; Zimmerman, Belinda; Yildiz, Mustafa

2014-01-01

Reading fluency has traditionally been recognized as a competency associated with word recognition and comprehension. As readers become more automatic in word identification they are able to devote less attention and cognitive resources to word decoding and more to text comprehension. The act of reading itself has been associated with growth in…

Tucker Signing as a Phonics Instruction Tool to Develop Phonemic Awareness in Children

ERIC Educational Resources Information Center

Valbuena, Amanda Carolina

2014-01-01

To develop reading acquisition in an effective way, it is necessary to take into account three goals during the process: automatic word recognition, or development of phonemic awareness, reading comprehension, and a desire for reading. This article focuses on promoting phonemic awareness in English as a second language through a program called…

78 FR 45558 - Western Gulf of Mexico Planning Area (WPA) Outer Continental Shelf (OCS) Oil and Gas Lease Sale...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... meters Initial period 0 to $25.00 per acre or fraction thereof for blocks in water depths less than 400 meters $100.00 per acre or fraction thereof for blocks in water depths of 400 meters or deeper BOEM will... specified minimum bid of $25.00 per acre or fraction thereof for blocks in water depths less than 400 meters...

Determining pH of strip-mine spoils

Treesearch

W. A. Berg

1969-01-01

Results with the LaMotte-Morgan method for determining soil pH-or the solution modification of this method-usually agreed fairly well with the results from using a pH meter, the recognized standard. Results obtained with the Soiltex and Hellige-Truog methods often deviated somewhat from the pH meter readings; and the Hydrion papers and the Kelway pH tester often gave...

47 CFR 73.1215 - Specifications for indicating instruments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... used by broadcast stations: (a) Linear scale instruments: (1) Length of scale shall not be less than 2.3 inches (5.8 cm). (2) Accuracy shall be at least 2 percent of the full scale reading. (3) The maximum rating of the meter shall be such that it does not read off scale during modulation or normal...

40 CFR 49.4166 - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... burning pilot flame, electronically controlled automatic igniters, and monitoring system failures, using a... failure, electronically controlled automatic igniter failure, or improper monitoring equipment operation... and natural gas emissions in the event that natural gas recovered for pipeline injection must be...

40 CFR 49.4166 - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... burning pilot flame, electronically controlled automatic igniters, and monitoring system failures, using a... failure, electronically controlled automatic igniter failure, or improper monitoring equipment operation... and natural gas emissions in the event that natural gas recovered for pipeline injection must be...

Gas chromatograph sample-transfer valve

NASA Technical Reports Server (NTRS)

Wang, W. S.; Wright, H. W., Jr.

1971-01-01

Slide-type gate valve incorporates sampling volume and transfer passageway for guiding a metered quantity of gas from pressurized test cell to gas chromatograph. Gate is moved by pneumatic bellows-type actuator.

Field calibration of orifice meters for natural gas flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ting, V.C.; Shen, J.J.S.

1989-03-01

This paper presents the orifice calibration results for nominal 15.24, 10.16, and 5.08-cm (6,4,2-in.) orifice meters conducted at the Chevron's Sand Hills natural gas flow measurement facility in Crane, Texas. Over 200 test runs were collected in a field environment to study the accuracy of the orifice meters. Data were obtained at beta ratios ranging from 0.12 to 0.74 at the nominal conditions of 4576 kPa and 27{sup 0}C (650 psig and 80{sup 0}F) with a 0.57 specific gravity processed, pipeline quality natural gas. A bank of critical flow nozzles was used as the flow rate proving device to calibratemore » the orifice meters. Orifice discharge coefficients were computed with ANSI/API 2530-1985 (AGA3) and ISO 5167/ASME MFC-3M-1984 equations for every set of data points. With the orifice bore Reynolds numbers ranging from 1 to 9 million, the Sand Hills calibration data bridge the gap between the Ohio State water data at low Reynolds numbers and Chevron's high Reynolds number test data taken at a large test facility in Venice, Louisiana. The test results also successfully demonstrate that orifice meters can be accurately proved with critical flow nozzles under realistic field conditions.« less

Velocity profile survey in a 16-in. custody-transfer orifice meter for natural gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, J.J.S.

1991-02-01

This paper describes a research project conducted at Chevron U.S.A. Inc.'s Venice, LA, facility to ascertain that the flow condition inside a nominal 16-in. (406-mm) custody-transfer orifice meter was in compliance with American Gas Assn. (AGA) requirements. The survey was conducted at four flow rates ranging from 160 to 200 MMscf/D (4.53 {times} 10{sup 6} to 5.66 {times} 10{sup 6} std m{sup 3}/d) of processed natural gas at 880 psia (6.1 MPa). Experimental data were collected by a portable data-acquisition system driven by a lap-top microcomputer. The measured profiles indicated that the flow was nearly fully developed at the orificemore » plate location, and no significant swirling motion was detected. This test successfully demonstrated the techniques and equipment developed for determining actual flow distributions inside orifice meters in the field under normal operating conditions. This technology can be used to detect detrimental flow profiles and to verify compliance with AGA requirements on flow conditions in custody-transfer orifice meters.« less

49 CFR 192.353 - Customer meters and regulators: Location.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service... protected from corrosion and other damage, including, if installed outside a building, vehicular damage that...

Design of Smart-Meter data acquisition device based on Cloud Platform

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-05-01

In recent years, the government has attached great importance to ‘Four-Meter Unified’ Project. Under the call of national policy, State Grid is participate in building ‘Four-Meter Unified’ Project actively by making use of electricity information acquisition system. In this paper, a new type Smart-Meter data acquisition device based on Cloud Platform is designed according to the newest series of standards Energy Measure and Management System for Electric, Water, Gas and Heat Meter, and this paper introduces the general scheme, main hardware design and main software design for the Smart-Meter data acquisition device.

30 CFR 250.1203 - Gas measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... any changes to the previously-approved measurement and/or allocation procedures. Your application... and reflect the same degree of water saturation as in the gas volume. (8) When requested by the Regional Supervisor, submit copies of gas volume statements for each requested gas meter. Show whether gas...

Laser power meters as an X-ray power diagnostic for LCLS-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heimann, Philip; Moeller, Stefan; Carbajo, Sergio

For the LCLS-II X-ray instruments, laser power meters are being developed as compact X-ray power diagnostics to operate at soft and tender X-ray photon energies. These diagnostics can be installed at various locations along an X-ray free-electron laser (FEL) beamline in order to monitor the transmission of X-ray optics along the beam path. In addition, the power meters will be used to determine the absolute X-ray power at the endstations. Here, thermopile power meters, which measure average power, and have been chosen primarily for their compatibility with the high repetition rates at LCLS-II, are evaluated. Here, a number of characteristicsmore » in the soft X-ray range are presented including linearity, calibrations conducted with a photodiode and a gas monitor detector as well as ultra-high-vacuum compatibility tests using residual gas analysis. The application of these power meters for LCLS-II and other X-ray FEL sources is discussed.« less

Laser power meters as an X-ray power diagnostic for LCLS-II.

PubMed

Heimann, Philip; Moeller, Stefan; Carbajo, Sergio; Song, Sanghoon; Dakovski, Georgi; Nordlund, Dennis; Fritz, David

2018-01-01

For the LCLS-II X-ray instruments, laser power meters are being developed as compact X-ray power diagnostics to operate at soft and tender X-ray photon energies. These diagnostics can be installed at various locations along an X-ray free-electron laser (FEL) beamline in order to monitor the transmission of X-ray optics along the beam path. In addition, the power meters will be used to determine the absolute X-ray power at the endstations. Here, thermopile power meters, which measure average power, and have been chosen primarily for their compatibility with the high repetition rates at LCLS-II, are evaluated. A number of characteristics in the soft X-ray range are presented including linearity, calibrations conducted with a photodiode and a gas monitor detector as well as ultra-high-vacuum compatibility tests using residual gas analysis. The application of these power meters for LCLS-II and other X-ray FEL sources is discussed.

Laser power meters as an X-ray power diagnostic for LCLS-II

DOE PAGES

Heimann, Philip; Moeller, Stefan; Carbajo, Sergio; ...

2018-01-01

For the LCLS-II X-ray instruments, laser power meters are being developed as compact X-ray power diagnostics to operate at soft and tender X-ray photon energies. These diagnostics can be installed at various locations along an X-ray free-electron laser (FEL) beamline in order to monitor the transmission of X-ray optics along the beam path. In addition, the power meters will be used to determine the absolute X-ray power at the endstations. Here, thermopile power meters, which measure average power, and have been chosen primarily for their compatibility with the high repetition rates at LCLS-II, are evaluated. Here, a number of characteristicsmore » in the soft X-ray range are presented including linearity, calibrations conducted with a photodiode and a gas monitor detector as well as ultra-high-vacuum compatibility tests using residual gas analysis. The application of these power meters for LCLS-II and other X-ray FEL sources is discussed.« less

30 CFR 203.40 - Which leases are eligible for royalty relief as a result of drilling a deep well or a phase 1...

Code of Federal Regulations, 2010 CFR

2010-07-01

... longitude in water depths entirely less than 400 meters deep. (b) The lease has not produced gas or oil from... than 200 meters and entirely less than 400 meters deep. (c) In the case of a lease located partly or... less than 400 meters of water, it must either: (1) Have been issued before November 28, 1995, and not...

When benefits outweigh costs: reconsidering "automatic" phonological recoding when reading aloud.

PubMed

Robidoux, Serje; Besner, Derek

2011-06-01

Skilled readers are slower to read aloud exception words (e.g., PINT) than regular words (e.g., MINT). In the case of exception words, sublexical knowledge competes with the correct pronunciation driven by lexical knowledge, whereas no such competition occurs for regular words. The dominant view is that the cost of this "regularity" effect is evidence that sublexical spelling-sound conversion is impossible to prevent (i.e., is "automatic"). This view has become so reified that the field rarely questions it. However, the results of simulations from the most successful computational models on the table suggest that the claim of "automatic" sublexical phonological recoding is premature given that there is also a benefit conferred by sublexical processing. Taken together with evidence from skilled readers that sublexical phonological recoding can be stopped, we suggest that the field is too narrowly focused when it asserts that sublexical phonological recoding is "automatic" and that a broader, more nuanced and contextually driven approach provides a more useful framework.

40 CFR 98.323 - Calculating GHG emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the meter automatically corrects for temperature and pressure, replace “520 °R/Ti × Pi/1 atm” with “1... at which flow is measured (°R). Pi = Daily pressure at which flow is measured (atm). 1,440...

Comparison of 5 reflectance meters for capillary blood glucose determination.

PubMed

Kolopp, M; Louis, J; Pointel, J P; Kohler, F; Drouin, P; Debry, G

1983-03-01

Manufacturing quality, accuracy and users opinion (i.e. medical and nurses staff and patients) were compared among five Destrostix reading reflectance-meters for home-blood-glucose-monitoring. Two machines (dextrometer and glucometer) equipped with microprocessors, integrated circuits and good quality wiring are best made. Reflectance-meter capillary blood glucose measurements were found to be accurate enough for home-blood-glucose-monitoring, compared to a reference method. However, two machines from the same brand were different in blood glucose accuracy. Glucocheck had poorest results. Users prefer small sized, battery powered machines. Glucometer appears to be best suited to home-blood-glucose-monitoring.

Resting-state functional connectivity indexes reading competence in children and adults.

PubMed

Koyama, Maki S; Di Martino, Adriana; Zuo, Xi-Nian; Kelly, Clare; Mennes, Maarten; Jutagir, Devika R; Castellanos, F Xavier; Milham, Michael P

2011-06-08

Task-based neuroimaging studies face the challenge of developing tasks capable of equivalently probing reading networks across different age groups. Resting-state fMRI, which requires no specific task, circumvents these difficulties. Here, in 25 children (8-14 years) and 25 adults (21-46 years), we examined the extent to which individual differences in reading competence can be related to resting-state functional connectivity (RSFC) of regions implicated in reading. In both age groups, reading standard scores correlated positively with RSFC between the left precentral gyrus and other motor regions, and between Broca's and Wernicke's areas. This suggests that, regardless of age group, stronger coupling among motor regions, as well as between language/speech regions, subserves better reading, presumably reflecting automatized articulation. We also observed divergent RSFC-behavior relationships in children and adults, particularly those anchored in the left fusiform gyrus (FFG) (the visual word form area). In adults, but not children, better reading performance was associated with stronger positive correlations between FFG and phonology-related regions (Broca's area and the left inferior parietal lobule), and with stronger negative relationships between FFG and regions of the "task-negative" default network. These results suggest that both positive RSFC (functional coupling) between reading regions and negative RSFC (functional segregation) between a reading region and default network regions are important for automatized reading, characteristic of adult readers. Together, our task-independent RSFC findings highlight the importance of appreciating developmental changes in the neural correlates of reading competence, and suggest that RSFC may serve to facilitate the identification of reading disorders in different age groups.

Reading Guided by Automated Graphical Representations: How Model-Based Text Visualizations Facilitate Learning in Reading Comprehension Tasks

ERIC Educational Resources Information Center

Pirnay-Dummer, Pablo; Ifenthaler, Dirk

2011-01-01

Our study integrates automated natural language-oriented assessment and analysis methodologies into feasible reading comprehension tasks. With the newly developed T-MITOCAR toolset, prose text can be automatically converted into an association net which has similarities to a concept map. The "text to graph" feature of the software is based on…

Examining the Impact of Quickreads' Technology and Print Formats on Fluency, Comprehension, and Vocabulary Development for Elementary Students

ERIC Educational Resources Information Center

Trainin, Guy; Hayden, H. Emily; Wilson, Kathleen; Erickson, Joan

2016-01-01

National reports reveal one third of American fourth graders read below basic level on measures of comprehension. One critical component of comprehension is fluency: rapid, accurate, expressive reading with automaticity and prosody. Many fluency studies and classroom interventions focus only on reading rate, but this alone is not sufficient. This…

Different RAN Components Relate to Reading at Different Points in Time

ERIC Educational Resources Information Center

Georgiou, George K.; Papadopoulos, Timothy C.; Kaizer, Eleni L.

2014-01-01

The present 10-year longitudinal study examined how rapid automatized naming (RAN) components--articulation time and pause time--relate to reading fluency. Seventy-five Greek-speaking children were followed from Grade 1 to Grade 10 and were assessed five times (in Grades 1, 2, 4, 6, and 10) on RAN (digits and objects) and reading fluency (word…

Students' performance in phonological awareness, rapid naming, reading, and writing.

PubMed

Capellini, Simone Aparecida; Lanza, Simone Cristina

2010-01-01

phonological awareness, rapid naming, reading and writing in students with learning difficulties of a municipal public school. to characterize and compare the performance of students from public schools with and without learning difficulties in phonological awareness, rapid naming, reading and writing. participants were 60 students from the 2nd to the 4th grades of municipal public schools divided into 6 groups. Each group was composed by 10 students, being 3 groups of students without learning difficulties and 3 groups with students with learning difficulties. As testing procedure phonological awareness, rapid automatized naming, oral reading and writing under dictation assessments were used. the results highlighted the better performance of students with no learning difficulties. Students with learning difficulties presented a higher ratios considering time/speed in rapid naming tasks and, consequently, lower production in activities of phonological awareness and reading and writing, when compared to students without learning difficulties. students with learning difficulties presented deficits when considering the relationship between naming and automatization skills, and among lexical access, visual discrimination, stimulus frequency use and competition in using less time for code naming, i.e. necessary for the phoneme-grapheme conversion process required in the reading and writing alphabetic system like the Portuguese language.

Rapid Automatized Naming, Verbal Working Memory, and Rhythm Discrimination as Predictors of Reading in Italian Undergraduate Students with and without Dyslexia.

PubMed

Cancer, Alice; Antonietti, Alessandro

2018-05-13

Whereas the clinical manifestations and the neuropsychological predictors of Developmental Dyslexia (DD) are already well documented in Italian-speaking children, empirical evidence on DD in Italian adults is in contrast rather scarce. The aim of the present study was to investigate the role of a subset of neuropsychological skills, which have been identified by previous literature to be related to reading, in the decoding abilities of a group of Italian undergraduates with and without DD. For this purpose, 39 university students aged between 19 and 27 years, 19 of whom with a diagnosis of DD, underwent an assessment battery including standardized reading tests, rapid automatized naming (RAN), verbal working memory, and rhythmic pattern discrimination tests. Cross-group differences confirmed significantly lower performances of undergraduates with DD in all measures but rhythm discrimination, compared to typical readers, thus showing a non-compensated neuropsychological profile. Regression analyses showed that, while reading speed was strongly and uniquely predicted by RAN speed, reading accuracy was concurrently predicted by RAN and rhythmic abilities. Finally, RAN speed emerged as a strong predictor of reading performance and risk of receiving a diagnosis of DD.

Simple Assessment of Nitrogen Nutrition Index in Summer Maize by Using Chlorophyll Meter Readings.

PubMed

Zhao, Ben; Ata-Ul-Karim, Syed Tahir; Liu, Zhandong; Zhang, Jiyang; Xiao, Junfu; Liu, Zugui; Qin, Anzhen; Ning, Dongfeng; Yang, Qiuxia; Zhang, Yonghui; Duan, Aiwang

2018-01-01

Rapid and non-destructive diagnostic tools to accurately assess crop nitrogen nutrition index (NNI) are imperative for improving crop nitrogen (N) diagnosis and sustaining crop production. This study was aimed to develop the relationships among NNI, leaf N gradient, chlorophyll meter (CM) readings gradient, and positional differences chlorophyll meter index [PDCMI, the ratio of CM readings between different leaf layers (LLs) of crop canopy] and to validate the accuracy and stability of these relationships across the different LLs, years, sites, and cultivars. Six multi-N rates (0-320 kg ha -1 ) field experiments were conducted with four summer maize cultivars (Zhengdan958, Denghai605, Xundan20, and Denghai661) at two different sites located in China. Six summer maize plants per plot were harvested at each sampling stage to assess NNI, leaf N concentration and CM readings of different LLs during the vegetative growth period. The results showed that the leaf N gradient, CM readings gradient and PDCMI of different LLs decreased, while the NNI values increased with increasing N supply. The leaf N gradient and CM readings gradient increased gradually from top to bottom of the canopy and CM readings of the bottom LL were more sensitive to changes in plant N concentration. The significantly positive relationship between NNI and CM readings of different LLs ( LL 1 to LL 3) was observed, yet these relationships varied across the years. In contrast, the relationships between NNI and PDCMI of different LLs ( LL 1 to LL 3) were significantly negative. The strongest relationship between PDCMI and NNI which was stable across the cultivars and years was observed for PDCMI1-3 (NNI = -5.74 × PDCMI1-3+1.5, R 2 = 0.76 ** ). Additionally, the models developed in this study were validated with the data acquired from two independent experiments to assess their accuracy of prediction. The root mean square error value of 0.1 indicated that the most accurate and robust relationship was observed between PDCMI1-3 and NNI. The projected results would help to develop a simple, non-destructive and reliable approach to accurately assess the crop N status for precisely managing N application during the growth period of summer maize crop.

40 CFR 65.147 - Flares.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., equal to or less than 122 meters per second (400 feet per second) if the net heating value of the gas... section, less than the velocity, V max, and less than 122 meters per second (400 feet per sec), where the... standard cubic meter (300 British thermal units per standard cubic foot) or greater if the flare is steam...

Development of the Navy’s Next-Generation Nonhydrostatic Modeling System

DTIC Science & Technology

2013-09-30

e.g. surface roughness, land- sea mask, surface albedo ) are needed by physical parameterizations. The surface values will be read and interpolated...characteristics (e.g. albedo , surface roughness) is now available to the model during the initialization stage. We have added infrastructure to the...six faces (Fig 3). 4 Figure 3: Topography (top left, in meters), surface roughness (top right, in meters), albedo (bottom left, no units

Calibration and application of an automated seepage meter for monitoring water flow across the sediment-water interface.

PubMed

Zhu, Tengyi; Fu, Dafang; Jenkinson, Byron; Jafvert, Chad T

2015-04-01

The advective flow of sediment pore water is an important parameter for understanding natural geochemical processes within lake, river, wetland, and marine sediments and also for properly designing permeable remedial sediment caps placed over contaminated sediments. Automated heat pulse seepage meters can be used to measure the vertical component of sediment pore water flow (i.e., vertical Darcy velocity); however, little information on meter calibration as a function of ambient water temperature exists in the literature. As a result, a method with associated equations for calibrating a heat pulse seepage meter as a function of ambient water temperature is fully described in this paper. Results of meter calibration over the temperature range 7.5 to 21.2 °C indicate that errors in accuracy are significant if proper temperature-dependence calibration is not performed. The proposed calibration method allows for temperature corrections to be made automatically in the field at any ambient water temperature. The significance of these corrections is discussed.

Automatic control of liquid cooling garment by cutaneous and external auditory meatus temperatures

NASA Technical Reports Server (NTRS)

Fulcher, C. W. G. (Inventor)

1971-01-01

An automatic control apparatus for a liquid cooling garment is described that is responsive to actual physiological needs during work and rest periods of a man clothed in the liquid cooling garment. Four skin temperature readings and a reading taken at the external portion of the auditory meatus are added and used in the control signal for a temperature control valve regulating inlet water temperature for the liquid cooling garment. The control apparatus comprises electronic circuits to which the temperatures are applied as control signals and an electro-pneumatic transducer attached to the control valve.

Six-Phase Heating(trademark) Pilot-Scale Test. Technology Performance Report, Dense Non-Aqueous Phase Liquid, Eastern Parking Lot Groundwater Plume. Air Force Plant 4, Fort Worth, Texas

DTIC Science & Technology

2001-05-01

The well vapor flows were calculated using the following formula taken from the Dwyer Series DS-300 Flow Sensor Instal/ation and Operating...IVllllble. TNRCC-D199 (Rev. 09-01 93) Send oriainal CODV by cerllfled mall 10: / TDLA ).(WWD/PIPl, P.O. BOll 12157 Austin TX 7871 1 Please use black Ink...gas, impinger exhaust, dry gas meter inlet, and dry gas meter outlet. A Fyrite™ kit was used to measure the oxygen and carbon dioxide concentration in

Handheld Multi-Gas Meters Market Survey Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Gustavious; Wald-Hopkins, Mark David; Obrey, Stephen J.

2016-06-23

Handheld multi-gas meters (MGMs) are equipped with sensors to monitor oxygen (O2) levels and additional sensors to detect the presence of combustible or toxic gases in the environment. This report is limited to operational response-type MGMs that include at least four different sensors. These sensors can vary by type and by the chemical monitored. In real time, the sensors report the concentration of monitored gases in the atmosphere near the MGM. To provide emergency responders with information on handheld multi-gas meters, the System Assessment and Validation for Emergency Responders (SAVER) Program conducted a market survey. This market survey report ismore » based on information gathered between November 2015 and February 2016 from vendors, Internet research, industry publications, an emergency responder focus group, and a government issued Request for Information (RFI) that was posted on the Federal Business Opportunities website.« less

Fission Meter Information Barrier Attribute Measurement System - NA-243 FNI/UKC FY2017 Task 1-2 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerr, P. L.; Decman, D.; Prasad, M.

An SNM attribute Information Barrier (IB) system was developed for a 2011 US/UK Exercise. The system was modified and extensively tested in a 2013-2014 US-UK Measurement Campaign. This work demonstrated rapid deployment of an IB system for potential treaty use. The system utilizes an Ortec Fission Meter neutron multiplicity counter and custom computer code. The system demonstrates a proof-of-principle automated Pu-240 mass determination with an information barrier. After a software start command is issued, the system automatically acquires and downloads data, performs an analysis, and displays the results. This system conveys the results of a Pu mass threshold measurements inmore » a way the does not reveal sensitive information. In full IB mode, only the pass/fail result is displayed as a “Mass <= Threshold Amount” or “Mass >= Threshold Amount” as shown in Figure 4. This can easily be adapted to a red/green “lights” display similar to the Detective IB system for Pu isotopics as shown in Figure 6. In test mode, more detailed information is displayed. The code can also read in, analyze, and display results from previously acquired or simulated data. Because the equipment is commercial-off-the-shelf (COTS), the system demonstrates a low-cost short-lead-time technology for treaty SNM attribute measurements. A deployed system will likely require integration of additional authentication and tamper-indicating technologies. This will be discussed for the project in this and future progress reports.« less

Seismic monitoring of the unstable rock slope at Aaknes, Norway

NASA Astrophysics Data System (ADS)

Roth, M.; Blikra, L. H.

2009-04-01

The unstable rock slope at Aaknes has an estimated volume of about 70 million cubic meters, and parts of the slope are moving at a rate between 2-15 cm/year. Amongst many other direct monitoring systems we have installed a small-scale seismic network (8 three-component geophones over an area of 250 x 150 meters) in order to monitor microseismic events related to the movement of the slope. The network has been operational since November 2005 with only a few short-term outages. Seismic data are transferred in real-time from the site to NORSAR for automatic detection processing. The resulting detection lists and charts and the associated waveform are forwarded immediately to the early warning centre of the Municipality of Stranda. Furthermore, we make them available after a delay of about 10-15 minutes on our public project web page (http://www.norsar.no/pc-47-48-Latest-Data.aspx). Seismic monitoring provides independent and complementary data to the more direct monitoring systems at Aaknes. We observe increased seismic activity in periods of heavy rain fall or snow melt, when laser ranging data and extensometer readings indicate temporary acceleration phases of the slope. The seismic network is too small and the velocity structure is too heterogeneous in order to obtain reliable localizations of the microseismic events. In summer 2009 we plan to install a high-sensitive broadband seismometer (60 s - 100 Hz) in the middle of the unstable slope. This will allow us to better constrain the locations of the microseismic events and to investigate potential low-frequency signals associated with the slope movement.

Automatic Lamp and Fan Control Based on Microcontroller

NASA Astrophysics Data System (ADS)

Widyaningrum, V. T.; Pramudita, Y. D.

2018-01-01

In general, automation can be described as a process following pre-determined sequential steps with a little or without any human exertion. Automation is provided with the use of various sensors suitable to observe the production processes, actuators and different techniques and devices. In this research, the automation system developed is an automatic lamp and an automatic fan on the smart home. Both of these systems will be processed using an Arduino Mega 2560 microcontroller. A microcontroller is used to obtain values of physical conditions through sensors connected to it. In the automatic lamp system required sensors to detect the light of the LDR (Light Dependent Resistor) sensor. While the automatic fan system required sensors to detect the temperature of the DHT11 sensor. In tests that have been done lamps and fans can work properly. The lamp can turn on automatically when the light begins to darken, and the lamp can also turn off automatically when the light begins to bright again. In addition, it can concluded also that the readings of LDR sensors are placed outside the room is different from the readings of LDR sensors placed in the room. This is because the light intensity received by the existing LDR sensor in the room is blocked by the wall of the house or by other objects. Then for the fan, it can also turn on automatically when the temperature is greater than 25°C, and the fan speed can also be adjusted. The fan may also turn off automatically when the temperature is less than equal to 25°C.

Environmental Assessment:Security and Safety Upgrades to Entry Control Facilities Vandenberg Air Force Base, California

DTIC Science & Technology

2009-07-08

meters; noisy urban daytime 70 – 80 Shouting at one meter; vacuum cleaner at three meters Gas lawnmower at 30 meters 60 – 70 Normal speech at one...military and political leaders during the Cold War. Since the National Aeronautics and Space Administration ( NASA ) was established in 1958, the...Preservation Needs with the Operation of Highly Technical or Scientific Facilities, specifically refers to the many active NASA and U.S. Air Force

AWOS Sensor Evaluation : Transmissometer, Forward-Scatter Meter and Lidar Ceilometer

DOT National Transportation Integrated Search

1984-01-01

Ceiling and visibility measurements are included in an Automatic Weather Observing System (AWOS) which is intended to satisfy the needs of aviation. The performance of one ceilometer and two visibility sensors was examined to determine whether they c...

Sonic impedance technique detects flaws in polyurethane foam spray-on insulation

NASA Technical Reports Server (NTRS)

Haralson, H. S.; Haynes, J. L.

1970-01-01

Sonic impedance testing detects voids and unbonded regions as small as 1 inch in diameter by 0.03 inch thick. Measurements are made manually or by automatic scanning and the readout is made by meter or recorder.

Airfoil for a turbine of a gas turbine engine

DOEpatents

Liang, George

2010-12-21

An airfoil for a turbine of a gas turbine engine is provided. The airfoil comprises a main body comprising a wall structure defining an inner cavity adapted to receive a cooling air. The wall structure includes a first diffusion region and at least one first metering opening extending from the inner cavity to the first diffusion region. The wall structure further comprises at least one cooling circuit comprising a second diffusion region and at least one second metering opening extending from the first diffusion region to the second diffusion region. The at least one cooling circuit may further comprise at least one third metering opening, at least one third diffusion region and a fourth diffusion region.

Personalization of Reading Passages Improves Vocabulary Acquisition

ERIC Educational Resources Information Center

Heilman, Michael; Collins-Thompson, Kevyn; Callan, Jamie; Eskenazi, Maxine; Juffs, Alan; Wilson, Lois

2010-01-01

The REAP tutoring system provides individualized and adaptive English as a Second Language vocabulary practice. REAP can automatically personalize instruction by providing practice readings about topics that match interests as well as domain-based, cognitive objectives. While most previous research on motivation in intelligent tutoring…

Alternative Fuels Data Center

Science.gov Websites

vehicle at 3,000 pounds (lbs.) per square inch and metered on a gasoline gallon equivalent (GGE ); liquefied natural gas (LNG) must be metered on a diesel gallon equivalent (DGE). One GGE of CNG is equal to

75 FR 28052 - MMS Information Collection Activity: 1010-0051, Oil and Gas Production Measurement, Extension of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-19

... meter calibration runs. Record mechanical- displacement prover, master meter, or tank prover proof runs... needed. 1202(f)(2) Copy & submit 16.5 minutes...... 74 reports........ 20 mechanical- displacement prover...

46 CFR 153.980 - Isolation of automatic closing valves.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Isolation of automatic closing valves. 153.980 Section 153.980 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

46 CFR 153.980 - Isolation of automatic closing valves.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Isolation of automatic closing valves. 153.980 Section 153.980 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

46 CFR 153.980 - Isolation of automatic closing valves.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Isolation of automatic closing valves. 153.980 Section 153.980 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

46 CFR 153.980 - Isolation of automatic closing valves.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Isolation of automatic closing valves. 153.980 Section 153.980 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

46 CFR 153.980 - Isolation of automatic closing valves.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Isolation of automatic closing valves. 153.980 Section 153.980 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

Investigation of a playa lake bed using geophysical electrical methods

NASA Astrophysics Data System (ADS)

Herrmenn, M.; Gurrola, H.; William, R.; Montalvo, R.; Horton, S.; Homberg, J.; Allen, T.; Bribiesca, E.; Lindsey, C.; Anderson, H.; Seshadri, S.; Manns, S.; Hassan, A.; Loren, C.

2005-12-01

The 2005 undergraduate applied geophysical class of Texas Tech University conducted a geophysical survey of a playa lake approximately 10 miles northwest of Lubbock Texas. The playa lake is primarily used as grazing land for two llamas and a hand full of sheep, and has been recently used as a dump for broken down sheds and barrels. Our goal was to model the subsurface of the transition from the playa to plains geology and investigate the possible contamination, of the soil and the data, by the metal dumped at the surface. We conducted our survey with and EM31 and homemade D.C. resistivity and SP equipment that allowed students to grasp the theories more clearly. SP readings were collected using clay pots constructed from terracotta pots and copper tubing purchased at the local hardware store and voltage measurements collected with handle held multi-meters. D.C. resistivity data were collected in a dipole-dipole array using 20 nine volt batteries connected in series with a large enough variable resistor and amp meter to regulate steady current flow. A multi meter was used to collect voltage readings. Wenner array data were collected using a home-made multi-filament cable connected switch box to allow a central user to regulate current and take voltage reading. A map of conductivity produced from a 10 m of EM31 reading show that conductivity anomalies mirror topography. The SP profiles show high values in the playa lake that drop off as we move from the clay rich lake bed to normal grassland. Analysis of both the Dipole-Dipole and Wenner array data support a model with 3 flat layers increasing in resistivity with depth. It appears that these remain flat passing beneath the playa and the playa is eroded into these layers.

EMMNet: sensor networking for electricity meter monitoring.

PubMed

Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

2010-01-01

Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters.

EMMNet: Sensor Networking for Electricity Meter Monitoring

PubMed Central

Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

2010-01-01

Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters. PMID:22163551

Attention to Action: Willed and Automatic Control of Behavior.

DTIC Science & Technology

1980-12-15

component is in need of supervisory assistance, has been suggested by LaBerge (1975), LaBerge and Samuels (1974); and Klein (1976). It is related to...Ed.), Motor Con- trol: Issues and Trends, New York: Academic Press, 1976. LaBerge , D., & Samuels, S.J. Toward a theory of automatic information...processing in reading. Cognitive Psychology 1974, 6, 293-323. LaBerge , D. Acquisition of automatic processing in perceptual and associative learning. In

Chevron facility focused on commercial orifice-meter research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, E.H.; Ferguson, K.R.

1987-07-27

Research to determine the accuracy of commercial orifice meters for custody-transfer measurement has indicated that high-volume gas meters can be flow-proven while in such service. The research further yielded more accurate orifice-meter discharge coefficient equations (at Reynolds numbers greater than 4,000,000) than current equations of the International Standards Organization (ISO) and the American Petroleum Institute (API). These are partial findings of a major study conducted by Chevron Oil Field Research Co. at its Venice, La., calibration facility.

Equipment and New Products

ERIC Educational Resources Information Center

Poitras, Adrian W., Ed.

1973-01-01

The following items are discussed: Digital Counters and Readout Devices, Automatic Burette Outfits, Noise Exposure System, Helium-Cadmium Laser, New pH Buffers and Flip-Top Dispenser, Voltage Calibrator Transfer Standard, Photomicrographic Stereo Zoom Microscope, Portable pH Meter, Micromanipulators, The Snuffer, Electronic Top-Loading Balances,…

A glucose meter evaluation co-designed with both health professional and consumer input.

PubMed

Thompson, Harmony; Chan, Huan; Logan, Florence J; Heenan, Helen F; Taylor, Lynne; Murray, Chris; Florkowski, Christopher M; Frampton, Christopher M A; Lunt, Helen

2013-11-22

Health consumer's input into assessment of medical device safety is traditionally given either as part of study outcome (trial participants) or during post marketing surveillance. Direct consumer input into the methodological design of device assessment is less common. We discuss the difference in requirements for assessment of a measuring device from the consumer and clinician perspectives, using the example of hand held glucose meters. Around 80,000 New Zealanders with diabetes recently changed their glucose meter system, to enable ongoing access to PHARMAC subsidised meters and strips. Consumers were most interested in a direct comparison of their 'old' meter system (Accu-Chek Performa) with their 'new' meter system (CareSens brand, including the CareSens N POP), rather than comparisons against a laboratory standard. This direct comparison of meter/strip systems showed that the CareSens N POP meter read around 0.6 mmol/L higher than the Performa system. Whilst this difference is unlikely to result in major errors in clinical decision making such as major insulin dosing errors, this information is nevertheless of interest to consumers who switched meters so that they could maintain access to PHARMAC subsidised meters and strips. We recommend that when practical, the consumer perspective be incorporated into study design related to medical device assessment.

The Structure of Phonological Processing and Its Relationship to Basic Reading

ERIC Educational Resources Information Center

Nelson, Jason M.; Lindstrom, Jennifer H.; Lindstrom, Will; Denis, Daniel

2012-01-01

We investigated various structural models of phonological processing and the relationship of phonological processing abilities to basic reading. Data were collected on 116 kindergarten and first grade students. The specific ability model, which included phonological awareness, phonological memory, and rapid automatized naming as separate…

Why Does Rapid Naming Predict Chinese Word Reading?

ERIC Educational Resources Information Center

Shum, Kathy Kar-man; Au, Terry Kit-fong

2017-01-01

Rapid automatized naming (RAN) robustly predicts early reading abilities across languages, but its underlying mechanism remains unclear. This study found that RAN associated significantly with processing speed but not with phonological awareness or orthographic knowledge in 89 Hong Kong Chinese second-graders. RAN overlaps more with processing…

NEAR-CONTINUOUS MEASUREMENT OF HYDROGEN SULFIDE AND CARBONYL SULFIDE BY AN AUTOMATIC GAS CHROMATOGRAPH

EPA Science Inventory

An automatic gas chromatograph with a flame photometric detector that samples and analyzes hydrogen sulfide and carbonyl sulfide at 30-s intervals is described. Temperature programming was used to elute trace amounts of carbon disulfide present in each injection from a Supelpak-S...

Seismic reflections identify finite differences in gas hydrate resources

USGS Publications Warehouse

Dillon, William P.; Max, M.

1999-01-01

Gas hydrate is a gas-bearing, ice-like crystalline solid. The substance's build ing blocks consist of a gas molecule (generally methane) sur-rounded by a cage of water molecules. The total amount of methane in hydrate in the world is immense - the most recent speculative estimate centers on values of 21x1015 cu meters. Thus, it may represent a future energy resource. This estimate was presented by Keith Kvenvolden at the International Symposium on Methane Hydrates, Resources in the Near Future, sponsor ed by Japanese National Oil Company (Tokyo, October, 1998).But, as with any natural resource, there is a need to find naturally occurring concentrations in order to effectively extract gas. We need to answer four basic questions:Do methane hydrate concentrations suitable for methane extraction exist?How can we recognize these concentrations?Where are concentrations located?What processes control methane hydrate concentrations?Gas hydrate occurs naturally at the pressure/ temperature/chemical conditions that are present within ocean floor sediments at water depths greater than about 500 meters. The gas hydrate stability zone (GHSZ) extends from the sea bottom downward to a depth where the natural increase in temperature causes the hydrate to melt (dissociate), even though the downward pressure increase is working to increase gas hydrate stability.Thus, the base of the GHSZ tends to parallel the seafloor at any given water depth (pressure), because the sub-seafloor isotherms (depths of constant temperature) generally parallel the seafloor. The layer at which gas hydrate is stable commonly extends from the sea floor to several hundred meters below it. The gas in most gas hydrates is methane, generated by bacteria in the sediments. In some cases, it can be higher carbon-number, thermogenic hydrocarbon gases that rise from greater depths.

Energy consumption analysis of the Venus Deep Space Station (DSS-13)

NASA Technical Reports Server (NTRS)

Hayes, N. V.

1983-01-01

This report continues the energy consumption analysis and verification study of the tracking stations of the Goldstone Deep Space Communications Complex, and presents an audit of the Venus Deep Space Station (DSS 13). Due to the non-continuous radioastronomy research and development operations at the station, estimations of energy usage were employed in the energy consumption simulation of both the 9-meter and 26-meter antenna buildings. A 17.9% decrease in station energy consumption was experienced over the 1979-1981 years under study. A comparison of the ECP computer simulations and the station's main watt-hour meter readings showed good agreement.

Effect of accuracy of wind power prediction on power system operator

NASA Technical Reports Server (NTRS)

Schlueter, R. A.; Sigari, G.; Costi, T.

1985-01-01

This research project proposed a modified unit commitment that schedules connection and disconnection of generating units in response to load. A modified generation control is also proposed that controls steam units under automatic generation control, fast responding diesels, gas turbines and hydro units under a feedforward control, and wind turbine array output under a closed loop array control. This modified generation control and unit commitment require prediction of trend wind power variation one hour ahead and the prediction of error in this trend wind power prediction one half hour ahead. An improved meter for predicting trend wind speed variation is developed. Methods for accurately simulating the wind array power from a limited number of wind speed prediction records was developed. Finally, two methods for predicting the error in the trend wind power prediction were developed. This research provides a foundation for testing and evaluating the modified unit commitment and generation control that was developed to maintain operating reliability at a greatly reduced overall production cost for utilities with wind generation capacity.

77 FR 65408 - Outer Continental Shelf (OCS) Western Planning Area (WPA) Gulf of Mexico (GOM) Oil and Gas Lease...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... leases in depths less than 400 meters with an initial period longer than 5 years, royalty rates, minimum... $25.00 per acre or fraction thereof for blocks in water depths of less than 400 meters. $100.00 per acre or fraction thereof for blocks in water depths of 400 meters or deeper. Rental Rates Annual rental...

Influence of automatic word reading on motor control.

PubMed

Gentilucci, M; Gangitano, M

1998-02-01

We investigated the possible influence of automatic word reading on processes of visuo-motor transformation. Six subjects were required to reach and grasp a rod on whose visible face the word 'long' or 'short' was printed. Word reading was not explicitly required. In order to induce subjects to visually analyse the object trial by trial, object position and size were randomly varied during the experimental session. The kinematics of the reaching component was affected by word presentation. Peak acceleration, peak velocity, and peak deceleration of arm were higher for the word 'long' with respect to the word 'short'. That is, during the initial movement phase subjects automatically associated the meaning of the word with the distance to be covered and activated a motor program for a farther and/or nearer object position. During the final movement phase, subjects modified the braking forces (deceleration) in order to correct the initial error. No effect of the words on the grasp component was observed. These results suggest a possible influence of cognitive functions on motor control and seem to contrast with the notion that the analyses executed in the ventral and dorsal cortical visual streams are different and independent.

Ubuntu Core Snaps for Science

NASA Astrophysics Data System (ADS)

Wyngaard, J.

2017-12-01

A key challenge in the burgeoning sector of IoT (Internet of Things) is ensuring device and communication security. Ubuntu Core's approach to this is the use of 'snaps'. Along side this growth, scientists are increasingly utilising the many new low cost sensors now available. This work prototypes the use of snaps as a possible avenue to reducing the barrier to entry for scientific use of these low cost sensors while also ensuring proper meta-data is captured. Snaps are contained applications that have been signed. This means that a snap application is unable to read or write to any area of the system beyond its assigned reach, thereby significantly limiting the possible impact of any break in security higher up the stack. Further, application and system updates are automatically verified as authentic before being applied. Additionally, on an embedded system running Ubuntu Core the hardware interface (Gadget), kernel, and OS (Core) are all also snaps and therefore also have acquired these same gains. The result is an architecture that enables: (1) Secure, robust, remote automatic updates of both the OS and applications. (2) A user friendly deployment mechanism.(3) A easy to maintain means of supporting multiple platforms. The above is primarily targeted at non-academic domains, however, it is proposed that the Scientific community can benefit from it too. This work therefore prototypes a snap for sensors on board a small Unmanned Aircraft System (sUAS). For demonstration purposes this snap specifically targets connecting a popular low cost CO2 meter to a Raspberry Pi3 and the popular open source sUAS autopilot Arducopter.

Design and development of an automatic data acquisition system for a balance study using a smartcard system.

PubMed

Ambrozy, C; Kolar, N A; Rattay, F

2010-01-01

For measurement value logging of board angle values during balance training, it is necessary to develop a measurement system. This study will provide data for a balance study using the smartcard. The data acquisition comes automatically. An individually training plan for each proband is necessary. To store the proband identification a smartcard with an I2C data bus protocol and an E2PROM memory system is used. For reading the smartcard data a smartcard reader is connected via universal serial bus (USB) to a notebook. The data acquisition and smartcard read programme is designed with Microsoft® Visual C#. A training plan file contains the individual training plan for each proband. The data of the test persons are saved in a proband directory. Each event is automatically saved as a log-file for the exact documentation. This system makes study development easy and time-saving.

Counting and RAN: Predictors of Arithmetic Calculation and Reading Fluency

ERIC Educational Resources Information Center

Koponen, Tuire; Salmi, Paula; Eklund, Kenneth; Aro, Tuija

2013-01-01

This study examined whether counting and rapid automatized naming (RAN) could operate as significant predictors of both later arithmetic calculation and reading fluency. The authors also took an important step to clarify the cognitive mechanisms underlying these predictive relationships by controlling for the effect of phonological awareness and…

Scaffolding or Distracting: CD-ROM Storybooks and Young Readers

ERIC Educational Resources Information Center

Pearman, Cathy J.; Chang, Ching-Wen

2010-01-01

CD-ROM storybooks, often referred to as electronic texts, e-books, and interactive stories, are learning tools with supplemental features such as automatic reading of text, sound effects, word pronunciations, and graphic animations which support the development of reading skills and comprehension in beginning readers. Some CD-ROM storybooks also…

Information Processing Abilities and Reading.

ERIC Educational Resources Information Center

Samuels, S. Jay

1987-01-01

A major focus in reading difficulty is lack of automaticity in decoding, which overloads the attentional system, leads to the use of small, meaningless visual processing units such as the individual letter, places heavy demands on short-term memory, and interferes with comprehension. Techniques for diagnosis and remediation are noted. (Author/JW)

Rapid Serial Naming Is a Unique Predictor of Spelling in Children

ERIC Educational Resources Information Center

Savage, Robert; Pillay, Vanitha; Melidona, Santo

2008-01-01

Some previous research has shown strong associations between spelling ability and rapid automatic naming (RAN) after controls for phonological processing and nonsense-word reading ability, consistent with the double-deficit hypothesis in reading and spelling. Previous studies did not, however, control for nonsense-word spelling ability before…

Cognitive Profiles of Italian Children with Developmental Dyslexia

ERIC Educational Resources Information Center

Tobia, Valentina; Marzocchi, Gian Marco

2014-01-01

The aim of this study was to investigate verbal and nonverbal cognitive deficits in Italian students with developmental dyslexia. The performances of 32 dyslexic students, 64 age-matched typically reading controls, and 64 reading age-matched controls were compared on tests of lexical knowledge, phonological awareness, rapid automatized naming,…

Accurately Predicting Future Reading Difficulty for Bilingual Latino Children at Risk for Language Impairment

ERIC Educational Resources Information Center

Petersen, Douglas B.; Gillam, Ronald B.

2013-01-01

Sixty-three bilingual Latino children who were at risk for language impairment were administered reading-related measures in English and Spanish (letter identification, phonological awareness, rapid automatized naming, and sentence repetition) and descriptive measures including English language proficiency (ELP), language ability (LA),…

Automatization and Orthographic Development in Second Language Visual Word Recognition

ERIC Educational Resources Information Center

Kida, Shusaku

2016-01-01

The present study investigated second language (L2) learners' acquisition of automatic word recognition and the development of L2 orthographic representation in the mental lexicon. Participants in the study were Japanese university students enrolled in a compulsory course involving a weekly 30-minute sustained silent reading (SSR) activity with…

Concepts and data-collection techniques used in a study of the unsaturated zone at a low-level radioactive-waste disposal site near Sheffield, Illinois

USGS Publications Warehouse

Healy, R.W.; DeVries, M.P.; Striegl, Robert G.

1986-01-01

A study of water and radionuclide movement through the unsaturated zone is being conducted at the low level radioactive waste disposal site near Sheffield, Illinois. Included in the study are detailed investigations of evapotranspiration, movement of water through waste trench covers, and movement of water and radionuclides (dissolved and gaseous) from the trenches. An energy balance/Bowen ratio approach is used to determine evapotranspiration. Precipitation, net radiation, soil-heat flux, air temperature and water vapor content gradients, wind speed, and wind direction are measured. Soil water tension is measured with tensiometers which are connected to pressure transducers. Meteorological sensors and tensiometers which are connected to pressure transducers. Meteorological sensors and tensiometers are monitored with automatic data loggers. Soil moisture contents are measured through small-diameter access tubes with neutron and gamma-ray attenuation gages. Data beneath the trenches are obtained through a 130-meter-long tunnel which extends under four of the trenches. Water samples are obtained with suction lysimeters, and samples of the geologic material are obtained with core tubes. These samples are analyzed for radiometric and inorganic chemistry. Gas samples are obtained from gas piezometers and analyzed for partial pressures of major constituents, Radon-222, tritiated water vapor, and carbon-14 dioxide. (USGS)

46 CFR 112.05-5 - Emergency power source.

Code of Federal Regulations, 2011 CFR

2011-10-01

... generator must be either a diesel engine or a gas turbine. [CGD 74-125A, 47 FR 15267, Apr. 8, 1982, as... power source (automatically connected storage battery or an automatically started generator) 36 hours.1... power source (automatically connected storage battery or an automatically started generator) 8 hours or...

46 CFR 112.05-5 - Emergency power source.

Code of Federal Regulations, 2010 CFR

2010-10-01

... generator must be either a diesel engine or a gas turbine. [CGD 74-125A, 47 FR 15267, Apr. 8, 1982, as... power source (automatically connected storage battery or an automatically started generator) 36 hours.1... power source (automatically connected storage battery or an automatically started generator) 8 hours or...

The precursors of double dissociation between reading and spelling in a transparent orthography.

PubMed

Torppa, Minna; Georgiou, George K; Niemi, Pekka; Lerkkanen, Marja-Kristiina; Poikkeus, Anna-Maija

2017-04-01

Research and clinical practitioners have mixed views whether reading and spelling difficulties should be combined or seen as separate. This study examined the following: (a) if double dissociation between reading and spelling can be identified in a transparent orthography (Finnish) and (b) the cognitive and noncognitive precursors of this phenomenon. Finnish-speaking children (n = 1963) were assessed on reading fluency and spelling in grades 1, 2, 3, and 4. Dissociation groups in reading and spelling were formed based on stable difficulties in grades 1-4. The groups were compared in kindergarten phonological awareness, rapid automatized naming, letter knowledge, home literacy environment, and task-avoidant behavior. The results indicated that the double dissociation groups could be identified even in the context of a highly transparent orthography: 41 children were unexpected poor spellers (SD), 36 were unexpected poor readers (RD), and 59 were poor in both reading and spelling (RSD). The RSD group performed poorest on all cognitive skills and showed the most task-avoidant behavior, the RD group performed poorly particularly on rapid automatized naming and letter knowledge, and the SD group had difficulties on phonological awareness and letter knowledge. Fathers' shared book reading was less frequent in the RD and RSD groups than in the other groups. The findings suggest that there are discernible double dissociation groups with distinct cognitive profiles. This further suggests that the identification of difficulties in Finnish and the planning of teaching and remediation practices should include both reading and spelling assessments.

Phonological Awareness and Rapid Automatized Naming Predicting Early Development in Reading and Spelling: Results from a Cross-Linguistic Longitudinal Study

PubMed Central

Furnes, Bjarte; Samuelsson, Stefan

2010-01-01

In this study, the relationship between latent constructs of phonological awareness (PA) and rapid automatized naming (RAN) were investigated and related to later measures of reading and spelling in children learning to read in different alphabetic writing systems (i.e., Norwegian/Swedish vs. English). 750 U.S./Australian children and 230 Scandinavian children were followed longitudinally between kindergarten and 2nd grade. PA and RAN were measured in kindergarten and Grade 1, while word recognition, phonological decoding, and spelling were measured in kindergarten, Grade 1, and Grade 2. In general, high stability was observed for the various reading and spelling measures, such that little additional variance was left open for PA and RAN. However, results demonstrated that RAN was more related to reading than spelling across orthographies, with the opposite pattern shown for PA. In addition, tests of measurement invariance show that the factor loadings of each observed indicator on the latent PA factor was the same across U.S./Australia and Scandinavia. Similar findings were obtained for RAN. In general, tests of structural invariance show that models of early literacy development are highly transferable across languages. PMID:21359098

Developmental dyslexia in adults: behavioural manifestations and cognitive correlates.

PubMed

Nergård-Nilssen, Trude; Hulme, Charles

2014-08-01

This paper explores the nature of residual literacy and cognitive deficits in self-reported dyslexic Norwegian adults. The performance of 26 self-reported dyslexic adults was compared with that of a comparison group of 47 adults with no history of reading or spelling difficulties. Participants completed standardized and experimental measures tapping literacy skills, working memory, phonological awareness and rapid naming. Spelling problems were the most prominent marker of dyslexia in adults, followed by text reading fluency and nonword decoding. Working memory and phoneme awareness explained unique variance in spelling, whereas rapid automatized naming explained unique variance in reading fluency and nonword reading. The moderate to strong correlations between self-reported history, self-rating of current literacy skills and outcomes on literacy tests indicate that adults estimated their literacy skills fairly well. Results suggest that spelling impairments, more strongly than reading impairments, make adults perceive themselves as being dyslexic. A combination of three literacy and three cognitive tests predicted group membership with 90.4% accuracy. It appears that weaknesses in phoneme awareness, rapid automatized naming and working memory are strong and persistent correlates of literacy problems even in adults learning a relatively transparent orthography. Copyright © 2014 John Wiley & Sons, Ltd.

47 CFR 73.49 - AM transmission system fencing requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Antenna towers having radio frequency potential at the base (series fed, folded unipole, and insulated... be provided to each antenna tower base for meter reading and maintenance purposes at all times...

47 CFR 73.49 - AM transmission system fencing requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... Antenna towers having radio frequency potential at the base (series fed, folded unipole, and insulated... be provided to each antenna tower base for meter reading and maintenance purposes at all times...

47 CFR 73.49 - AM transmission system fencing requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Antenna towers having radio frequency potential at the base (series fed, folded unipole, and insulated... be provided to each antenna tower base for meter reading and maintenance purposes at all times...

Preparation and Characteristics of Ultrasonic Transducers for High Temperature Using PbNb2O6

NASA Astrophysics Data System (ADS)

Soejima, Junichiro; Sato, Kokichi; Nagata, Kunihiro

2000-05-01

The substance PZT(Pb(Zr, Ti)O3) is chiefly used for piezoceramic transducers in many ultrasonic flow meters. It is difficult to use PZT transducers for flow meters for automobile exhaust gas at high temperatures over 350°C. Lead niobate (PbNb2O6) has a high Curie temperature of 540°C and a low mechanical quality factor, and is the most suitable as the sensor element in flow meters for automobile exhaust gas. However, it is difficult to fabricate dense PbNb2O6 ceramics that have good piezoelectric properties. In this study, ceramics with high density and a high piezoelectric effect were fabricated by adding various elements such as Mn and Ca to PbNb2O6 and by examining the sintering process. A Langevin transducer with a resonance frequency of 80 kHz was made for measuring automobile exhaust gas flow using PbNb2O6 ceramics.

Kindergarten Predictors of Third Grade Writing

PubMed Central

Kim, Young-Suk; Al Otaiba, Stephanie; Wanzek, Jeanne

2015-01-01

The primary goal of the present study was to examine the relations of kindergarten transcription, oral language, word reading, and attention skills to writing skills in third grade. Children (N = 157) were assessed on their letter writing automaticity, spelling, oral language, word reading, and attention in kindergarten. Then, they were assessed on writing in third grade using three writing tasks – one narrative and two expository prompts. Children’s written compositions were evaluated in terms of writing quality (the extent to which ideas were developed and presented in an organized manner). Structural equation modeling showed that kindergarten oral language and lexical literacy skills (i.e., word reading and spelling) were independently predicted third grade narrative writing quality, and kindergarten literacy skill uniquely predicted third grade expository writing quality. In contrast, attention and letter writing automaticity were not directly related to writing quality in either narrative or expository genre. These results are discussed in light of theoretical and practical implications. PMID:25642118

Vendors unveil one-step fugitive emissions monitoring, management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, M.

1995-04-01

An alliance of manufacturers has developed a ``single-source solution`` for fugitive emissions monitoring. The LeakTracker{trademark} system combines barcode scans, and vapor detection and data collection capabilities to help companies comply with leak detection and repair requirements as mandated by the Environmental Protection Agency`s Method 21 guidelines. LeakTracker doubles productivity and helps eliminate human-error factors associated with fugitive emissions monitoring. Two-person teams, clipboard-and-pencil data entry, and manual data transcription are eliminated. By automating the process and integrating all components, a technician can monitor 500 points daily following Method 21 guidelines, compared to about 250 readings per day using other systems. LeakTrackermore » includes a handheld workstation, sampling probe and laser-scan barcode reader that fit in a vest worn by a field technician. The technician points the workstation toward a barcode tag and pulls the trigger, which initiates a barcode read and automatically records the time, date and location. While the detachable probe ``sniffs`` for emissions, an analyzer interface module converts the gas detection signal from analog to digital format, allowing data to be recorded by the workstation. LeakTracker has an accuracy rate of 1 part per million.« less

Automated radio astronomy operations

NASA Technical Reports Server (NTRS)

Livermore, R. W.

1978-01-01

The improvements in using a computer to drive a DSN 64-meter antenna are described. The development is used to simplify operation, improve antenna safety, reduce antenna wear, present the abuse of antenna by misoperation, increase quantity and quality of data gathered, and give users a greater choice of automatic operations.

40 CFR 86.140-94 - Exhaust sample analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-cycle and methanol-fueled, natural gas-fueled and liquefied petroleum gas-fueled (if non-heated FID option is used) diesel vehicle HC: (1) Zero the analyzers and obtain a stable zero reading. Recheck after...: (1) Zero HFID analyzer and obtain a stable zero reading. (2) Introduce span gas and set instrument...

40 CFR 86.140-94 - Exhaust sample analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-cycle and methanol-fueled, natural gas-fueled and liquefied petroleum gas-fueled (if non-heated FID option is used) diesel vehicle HC: (1) Zero the analyzers and obtain a stable zero reading. Recheck after...: (1) Zero HFID analyzer and obtain a stable zero reading. (2) Introduce span gas and set instrument...

The planning and implementation of a demand-side management/distribution automation system at Taiwan Power Company

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, S.S.; Chen, Yun-Wu

1994-12-31

This paper would describe the Taipower`s experience of DSM/DAS development. For the past 5 years, the demand of electricity has maintained a high annual growth rate of 8.45% due to economic prosperity in Taiwan. As the environmental protection consciousness has recently made Taipower difficult to develope and construct new power plants, substations, transmission and distribution lines, and our power grid is an independent system, we do need to concern how to do DSM to manage the load problems. Since 1984, Taipower has established two pilot systems and these systems performed the functions of fault detect and isolation certainly good formore » Distribution Automation. With the rapid development of computer, communication and control technology, the concept of the DAS has gradually been implemented in real cases. Taipower organized an engineering task group to study DAS several years ago, and based on the operation experience of the existing systems, today Taipower is planning to launch a new DAS project for Tai-Chung area. According to Taipower requirements, the DAS will have the functions of feeder automation, automatic meter reading, load management and disteibution system analysis.« less

[Relationship between magnocellular function and reading skills in children: a study using visual evoked potentials].

PubMed

Kobayashi, Tomoka; Inagaki, Masumi; Yamazaki, Hiroko; Kita, Yosuke; Kaga, Makiko; Oka, Akira

2014-11-01

Developmental dyslexia (DD) is a neurodevelopmental disorder that is characterized by difficulties with accurate and/or fluent word recognition and by poor spelling and decoding abilities. The magnocellular deficit theory is one of several hypotheses that have been proposed to explain the pathophysiology of DD. In this study, we investigated magnocellular system dysfunction in Japanese dyslexic children. Subjects were 19 dyslexic children (DD group) and 19 aged-matched healthy children (TD group). They were aged between 7 and 16 years. Reversed patterns of black and white sinusoidal gratings generated at a low spatial frequency, high reversal frequency of 7.5 Hz, and low contrasts were used specifically to stimulate the magnocellular system. We recorded visual evoked potentials (VEP) from the occipital area and examined their relationship with reading and naming tasks, such as the time to read hiragana characters, rapid automatized naming of pictured objects, and phonological manipulation. Compared to the TD group, the DD group showed a significantly lower peak amplitude of VEPs through the complex demodulation method. Structural equation modeling showed that VEP peak amplitudes were related to the rapid automatized naming of pictured objects, and better rapid automatized naming resulted in higher reading skills. There was no correlation between VEP findings and the capacity for phonological manipulation. VEPs in response to the magnocellular system are useful for understanding the pathophysiology of DD. Single phonological deficit may not be sufficient to cause DD.

The widely used ATB FUNGUS 3 automated readings in China and its misleading high MICs of Candida spp. to azoles: challenges for developing countries' clinical microbiology labs.

PubMed

Zhang, Li; Wang, He; Xiao, Meng; Kudinha, Timothy; Mao, Lei-Li; Zhao, Hao-Ran; Kong, Fanrong; Xu, Ying-Chun

2014-01-01

The rapid development in the clinical microbiology diagnostic assays presents more challenges for developing countries than for the developed world, especially in the area of test validation before the introduction of new tests. Here we report on the misleading high MICs of Candida spp. to azoles using the ATB FUNGUS 3 (bioMérieux, La Balme-les Grottes, France) with automated readings in China to highlight the dangers of introducing a diagnostic assay without validation. ATB FUNGUS 3 is the most commonly used commercial antifungal susceptibility testing method in China. An in-depth analysis of data showed higher levels of resistance to azoles when ATB FUNGUS 3 strips were read automatically than when read visually. Based on this finding, the performance of ATB FUNGUS 3, read both visually and automatically, was evaluated by testing 218 isolates of five clinically important Candida species, using broth microdilution (BMD) following CLSI M27-A3 as the gold-standard. The overall essential agreement (EA) between ATB visual readings and BMD was 99.1%. In contrast, the ATB automated readings showed higher discrepancies with BMD, with overall EA of 86.2%, and specifically lower EA was observed for fluconazole (80.7%), voriconazole (77.5%), and itraconazole (73.4%), which was most likely due to the trailing effect of azoles. The major errors in azole drug susceptibilities by ATB automated readings is a concern in China that can result in misleading clinical antifungal drug selection and pseudo high rates of antifungal resistance. Therefore, the ATB visual reading is generally recommended. In the meantime, we propose a practical algorithm to be followed for ATB FUNGUS 3 antifungal susceptibility for Candida spp. before the improvement in the automated reading system.

Physics Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Outlines methodology, demonstrations, and materials including: an inexpensive wave machine; speed of sound in carbon dioxide; diffraction grating method for measuring spectral line wavelength; linear electronic thermometer; analogy for bromine diffusion; direct reading refractice index meter; inexpensive integrated circuit spectrophotometer; and…

A Randomized Response Model For Privacy Preserving Smart Metering.

PubMed

Wang, Shuang; Cui, Lijuan; Que, Jialan; Choi, Dae-Hyun; Jiang, Xiaoqian; Cheng, Samuel; Xie, Le

2012-09-01

The adoption of smart meters may bring new privacy concerns to the general public. Given the fact that metering data of individual homes/factories is accumulated every 15 minutes, it is possible to infer the pattern of electricity consumption of individual users. In order to protect the privacy of users in a completely de-centralized setting (i.e., individuals do not communicate with one another), we propose a novel protocol, which allows individual meters to report the true electricity consumption reading with a pre-determinted probability. Load serving entities (LSE) can reconstruct the total electricity consumption of a region or a district through inference algorithm, but their ability of identifying individual users' energy consumption pattern is significantly reduced. Using simulated data, we verify the feasibility of the proposed method and demonstrate performance advantages over existing approaches.

Fabrication and test of digital output interface devices for gas turbine electronic controls

NASA Technical Reports Server (NTRS)

Newirth, D. M.; Koenig, E. W.

1978-01-01

A program was conducted to develop an innovative digital output interface device, a digital effector with optical feedback of the fuel metering valve position, for future electronic controls for gas turbine engines. A digital effector (on-off solenoids driven directly by on-off signals from a digital electronic controller) with optical position feedback was fabricated, coupled with the fuel metering valve, and tested under simulated engine operating conditions. The testing indicated that a digital effector with optical position feedback is a suitable candidate, with proper development for future digital electronic gas turbine controls. The testing also identified several problem areas which would have to be overcome in a final production configuration.

Training Letter and Orthographic Pattern Recognition in Children with Slow Naming Speed

ERIC Educational Resources Information Center

Conrad, Nicole J.; Levy, Betty Ann

2011-01-01

Although research has established that performance on a rapid automatized naming (RAN) task is related to reading, the nature of this relationship is unclear. Bowers (2001) proposed that processes underlying performance on the RAN task and orthographic knowledge make independent and additive contributions to reading performance. We examined the…

Rapid Automatized Naming and Reading Performance: A Meta-Analysis

ERIC Educational Resources Information Center

Araújo, Susana; Reis, Alexandra; Petersson, Karl Magnus; Faísca, Luís

2015-01-01

Evidence that rapid naming skill is associated with reading ability has become increasingly prevalent in recent years. However, there is considerable variation in the literature concerning the magnitude of this relationship. The objective of the present study was to provide a comprehensive analysis of the evidence on the relationship between rapid…

Single and Double Deficits in Early Readers in Rural, Low-Wealth Communities

ERIC Educational Resources Information Center

Fedora, Pledger M.

2016-01-01

This study used secondary data to test the double-deficit hypothesis that rapid automatized naming (RAN) deficits and phonological awareness (PA) deficits are 2 core reading-related deficits and that students exhibiting deficits in both areas would be the most severely impaired in entry-level reading ability. Specifically, this study investigated…

Longitudinal Stability of Pre-Reading Skill Profiles of Kindergarten Children: Implications for Early Screening and Theories of Reading

ERIC Educational Resources Information Center

Ozernov-Palchik, Ola; Norton, Elizabeth S.; Sideridis, Georgios; Beach, Sara D.; Wolf, Maryanne; Gabrieli, John D. E.; Gaab, Nadine

2017-01-01

Research suggests that early identification of developmental dyslexia is important for mitigating the negative effects of dyslexia, including reduced educational attainment and increased socioemotional difficulties. The strongest pre-literacy predictors of dyslexia are rapid automatized naming (RAN), phonological awareness (PA), letter knowledge,…

Development of Word Reading Fluency and Spelling in a Consistent Orthography: An 8-Year Follow-Up

ERIC Educational Resources Information Center

Landerl, Karin; Wimmer, Heinz

2008-01-01

In a longitudinal study, development of word reading fluency and spelling were followed for almost 8 years. In a group of 115 students (65 girls, 50 boys) acquiring the phonologically transparent German orthography, prediction measures (letter knowledge, phonological short-term memory, phonological awareness, rapid automatized naming, and…

Reading Aloud: Spelling-Sound Translation Uses Central Attention

ERIC Educational Resources Information Center

O'Malley, Shannon; Reynolds, Michael G.; Stolz, Jennifer A.; Besner, Derek

2008-01-01

Contrary to the received view that reading aloud reflects processes that are "automatic," recent evidence suggests that some of these processes require a form of attention. This issue was investigated further by examining the effect of a prior presentation of exception words (words whose spelling-sound translation are atypical, such as pint as…

Some Thermophysical Properties of Blood Components and Coolants for Frozen Blood Shipping Containers

DTIC Science & Technology

1989-09-01

SP number by sending a DP reading. Subroutine : AutoControl Automatic control to set temperature. : Autodisplay Get ilL Thermocouple readings and...RETURN 133 AutoControl : Auto control Mode ON TIMER(ReportTime) GOSUB Autodisplay Update Screen in constant interval TIMER ON WHILE Success a 0 Turn off

Auditory Stimulus Processing and Task Learning Are Adequate in Dyslexia, but Benefits from Regularities Are Reduced

ERIC Educational Resources Information Center

Daikhin, Luba; Raviv, Ofri; Ahissar, Merav

2017-01-01

Purpose: The reading deficit for people with dyslexia is typically associated with linguistic, memory, and perceptual-discrimination difficulties, whose relation to reading impairment is disputed. We proposed that automatic detection and usage of serial sound regularities for individuals with dyslexia is impaired (anchoring deficit hypothesis),…

Automatic Scaffolding and Measurement of Concept Mapping for EFL Students to Write Summaries

ERIC Educational Resources Information Center

Yang, Yu-Fen

2015-01-01

An incorrect concept map may obstruct a student's comprehension when writing summaries if they are unable to grasp key concepts when reading texts. The purpose of this study was to investigate the effects of automatic scaffolding and measurement of three-layer concept maps on improving university students' writing summaries. The automatic…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Q

Purpose: According to clinical and research requirement, we develop a function of automatic reading dose of interest from dose volume histogram(DVH), to replace the traditional method with a mouse one by one point, and it's also verified. Methods: The DVH automatic reading function will be developed in an in-house developed radiotherapy information management system(RTIMS), which is based on Apache+PHP+MySQL. A DVH ASCII file is exported from Varian Eclipse V8.6, which includes the following contents: 1. basic information of patient; 2. dose information of plan; 3. dose information of structures, including basic information and dose volume data of target volume andmore » organ at risk. And the default exported dose volume data also includes relative doses by 1% step and corresponding absolute doses and cumulative relative volumes, and the volumes are 4 decimal fraction. Clinically, we often need read the doses of some integer percent volumes, such as D50 and D30. So it couldn't be directly obtained from the above data, but we can use linear interpolation bye the near volumes and doses: Dx=D2−(V2−Vx)*(D2−D1)/(V2−V1), and program a function to search, read and calculate the corresponding data. And the doses of all preseted volume of interest of all structures can be automatically read one by one patient, and saved as a CSV file. To verify it, we select 24 IMRT plans for prostate cancer, and doses of interest are PTV D98/D95/D5/D2, bladder D30/D50, and rectum D25/D50. Two groups of data, using the automatic reading method(ARM) and pointed dose method(PDM), are analyzed with SPSS 16. The absolute difference=D-ARM-D-PDM, relative difference=absolute difference*100%/prescription dose(7600cGy). Results: The differences are as following: PTV D98/D95/D5/D2: −0.04%/− 0.04%/0.13%/0.19%, bladder D30/D50: −0.02%/0.01%, and rectum D25/D50: 0.03%/0.01%. Conclusion: Using this function, the error is very small, and can be neglected. It could greatly improve the efficiency of clinical work. Project supported by the National Natural Science Foundation of China (Grant No.81101694)« less

75 FR 19963 - Florida Gas Transmission Company, LLC; Transcontinental Gas Pipe Line Company, LLC; Florida Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... County, Alabama, (milepost [MP] 0.0); One new Meter and Regulation (M&R) (Grand Bay M&R Station) with pig launcher in Grand Bay, Alabama (MP 8.8); One new Over Pressure Protection Regulator Station with pig...

Development of Porosity Measurement Method in Shale Gas Reservoir Rock

NASA Astrophysics Data System (ADS)

Siswandani, Alita; Nurhandoko, BagusEndar B.

2016-08-01

The pore scales have impacts on transport mechanisms in shale gas reservoirs. In this research, digital helium porosity meter is used for porosity measurement by considering real condition. Accordingly it is necessary to obtain a good approximation for gas filled porosity. Shale has the typical effective porosity that is changing as a function of time. Effective porosity values for three different shale rocks are analyzed by this proposed measurement. We develop the new measurement method for characterizing porosity phenomena in shale gas as a time function by measuring porosity in a range of minutes using digital helium porosity meter. The porosity of shale rock measured in this experiment are free gas and adsorbed gas porosoty. The pressure change in time shows that porosity of shale contains at least two type porosities: macro scale porosity (fracture porosity) and fine scale porosity (nano scale porosity). We present the estimation of effective porosity values by considering Boyle-Gay Lussaac approximation and Van der Waals approximation.

The interface between spoken and written language: developmental disorders.

PubMed

Hulme, Charles; Snowling, Margaret J

2014-01-01

We review current knowledge about reading development and the origins of difficulties in learning to read. We distinguish between the processes involved in learning to decode print, and the processes involved in reading for meaning (reading comprehension). At a cognitive level, difficulties in learning to read appear to be predominantly caused by deficits in underlying oral language skills. The development of decoding skills appears to depend critically upon phonological language skills, and variations in phoneme awareness, letter-sound knowledge and rapid automatized naming each appear to be causally related to problems in learning to read. Reading comprehension difficulties in contrast appear to be critically dependent on a range of oral language comprehension skills (including vocabulary knowledge and grammatical, morphological and pragmatic skills).

A continuous physiological data collector

NASA Technical Reports Server (NTRS)

Bush, J. C.

1972-01-01

COP-DAC system utilizes oxygen and carbon dioxide analyzers, gas-flow meter, gas breathe-through system, analog computer, and data storage system to provide actual rather than average measurements of physiological and metabolic functions.

18 CFR 367.3950 - Account 395, Laboratory equipment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... bottles for meter prover testing. (33) Standard cell, reactance, resistor, and shunt. (34) Stills. (35.... (45) Other items of equipment for testing gas, fuel, flue gas, water, residuals, and other similar...

49 CFR 192.383 - Excess flow valve installation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators... psig or greater throughout the year; (2) The operator has prior experience with contaminants in the gas...

Virtual Titrator: A Student-Oriented Instrument.

ERIC Educational Resources Information Center

Ritter, David; Johnson, Michael

1997-01-01

Describes a titrator system, constructed from a computer-interfaced pH-meter, that was designed to increase student involvement in the process. Combines automatic data collection with real-time graphical display and interactive controls to focus attention on the process rather than on bits of data. Improves understanding of concepts and…

Presenting the master of all conductivity meters, and how it tastes streamflow

NASA Astrophysics Data System (ADS)

Weijs, S. V.; Parlange, M. B.

2012-04-01

For measuring streamflow in small Alpine streams, the salt dilution method is suitable and often used. By injecting a known mass of salt in the stream and measuring the downstream salt concentration as a function of time, we can obtain the streamflow by integration of the time signal. The underlying assumption is that the salt is well mixed within the stream cross-section. In this method, the salt concentration us usually measured through its relation with conductivity. Several commercial systems exist to do these conductivity measurements and automatically process the results. The problem we encountered when using these systems, however, is that uncertainty is often hidden under the hood. Because the processing happens onboard, researchers may be tempted to put too much trust in the final measurement outcomes. This is somewhat remediated by using a system with two probes which are individually processed to a streamflow outcome. We found that the salt-wave was differently shaped for the faster part of the stream compared to the sides, and therefore gave different readings for the discharge. To come a more probabilistic characterization of streamflow, and to know what is under the hood, we decided to build our own conductivity meter, equipped with eight probes covering the cross section. This enables quantifying some of the uncertainty in the streamflow measurements, which is important for testing hydrological models. This poster shows the first results and the hardware setup. We based our hardware on the open source hardware platform Arduino, and believe that by sharing both the design and the drawbacks, we contribute to the evolution of better measurement equipment or at least better understanding of its shortcomings.

Standardization of Broadband UV Measurements for 365 nm LED Sources

PubMed Central

Eppeldauer, George P.

2012-01-01

Broadband UV measurements are evaluated when UV-A irradiance meters measure optical radiation from 365 nm UV sources. The CIE standardized rectangular-shape UV-A function can be realized only with large spectral mismatch errors. The spectral power-distribution of the 365 nm excitation source is not standardized. Accordingly, the readings made with different types of UV meters, even if they measure the same UV source, can be very different. Available UV detectors and UV meters were measured and evaluated for spectral responsivity. The spectral product of the source-distribution and the meter’s spectral-responsivity were calculated for different combinations to estimate broad-band signal-measurement errors. Standardization of both the UV source-distribution and the meter spectral-responsivity is recommended here to perform uniform broad-band measurements with low uncertainty. It is shown what spectral responsivity function(s) is needed for new and existing UV irradiance meters to perform low-uncertainty broadband 365 nm measurements. PMID:26900516

Transcutaneous measurement of hyperbilirubinaemia: comparison of the Minolta jaundice meter and the Ingram icterometer.

PubMed

Bilgen, H; Ince, Z; Ozek, E; Bekiroglu, N; Ors, R

1998-12-01

The effectiveness of two different non-invasive transcutaneous bilirubin measurement devices was compared with serum bilirubin levels in 96 healthy newborns. Transcutaneous measurements were obtained with the Minolta Air Shields jaundice meter and the Ingram icterometer and serum bilirubin levels were determined by a direct spectrophotometric method (Bilitron 444). A linear correlation existed between serum bilirubin values and the readings on both the Minolta jaundice meter (r = 0.83) and the Ingram icterometer (r = 0.78). The Kappa coefficient was 0.66. the sensitivity, specificity and positive and negative predictive values were 100%, 56%, 33% and 100% for the Minolta jaundice meter and 100%, 48%, 29% and 100% for the Ingram icterometer, respectively. The high sensitivity and negative predictive value of both devices render them suitable for screening neonatal hyperbilirubinaemia. However, because of its low cost, the Ingram icterometer is preferable to the more complex and expensive Minolta jaundice meter, especially in countries with a high birth rate, such as Turkey.

46 CFR 154.904 - Inert gas system: Controls.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas system... the cargo area meeting paragraph (a) of this section; (c) Automatic and manual inert gas pressure...

Nonlinear model for offline correction of pulmonary waveform generators.

PubMed

Reynolds, Jeffrey S; Stemple, Kimberly J; Petsko, Raymond A; Ebeling, Thomas R; Frazer, David G

2002-12-01

Pulmonary waveform generators consisting of motor-driven piston pumps are frequently used to test respiratory-function equipment such as spirometers and peak expiratory flow (PEF) meters. Gas compression within these generators can produce significant distortion of the output flow-time profile. A nonlinear model of the generator was developed along with a method to compensate for gas compression when testing pulmonary function equipment. The model and correction procedure were tested on an Assess Full Range PEF meter and a Micro DiaryCard PEF meter. The tests were performed using the 26 American Thoracic Society standard flow-time waveforms as the target flow profiles. Without correction, the pump loaded with the higher resistance Assess meter resulted in ten waveforms having a mean square error (MSE) higher than 0.001 L2/s2. Correction of the pump for these ten waveforms resulted in a mean decrease in MSE of 87.0%. When loaded with the Micro DiaryCard meter, the uncorrected pump outputs included six waveforms with MSE higher than 0.001 L2/s2. Pump corrections for these six waveforms resulted in a mean decrease in MSE of 58.4%.

Terrain, Turbulence, and Tight Turns: Airborne Measurement of the Aliso Canyon Methane Leak

NASA Astrophysics Data System (ADS)

Conley, S. A.; Ryerson, T. B.; Faloona, I. C.; Blake, D. R.; Franco, G.

2016-12-01

The now infamous natural gas well SS25 sits mid-way up the Santa Susanna mountains at an elevation of 900 meters, on the northern border of the Los Angeles basin. To the north, terrain rises sharply by another 200 meters, with rugged hilly terrain east and west. To the south, the town of Porter Ranch lies in the San Fernando valley 400 meters below SS25. With climatologic wintertime north winds carrying the odorized gas into the valley, airborne measurement was confined to a narrow region between the hills and the nearby Los Angeles airspace, and wind speed gradients as much as 20 m s-1 over a distance of several kilometers resulted in frequent severe turbulence at low altitudes over Porter Ranch. We flew 17 missions to measure the leak, constructing a 2D flux plane roughly 3 kilometers downwind of the source. By integrating the flux measured at each altitude from our minimum safe altitude ( 65 meters) to somewhere above the plume top ( 1000 meters), we estimate the total methane emission from the largest anthropogenic methane source in US history (97,100 metric tons over the course of approximately four months).

Comparison of two methods of measuring gastric pH.

PubMed

Neill, K M; Rice, K T; Ahern, H L

1993-01-01

To assess the agreement between two methods of measuring gastric pH in critically ill patients (multiple band litmus paper-tested aspirations versus a meter-read probe located in the tip of a nasogastric tube) and to compare nurse satisfaction with both methods of measuring pH. Prospective, correlational, nonprobability sample. Mid-Atlantic, semirural Veterans Affairs Medical Center. 39 male, surgical, critical care patients, who were nasogastrically intubated in the operating room and received nothing by mouth. NURSES: Twenty-seven registered nurses on the medical-surgical intensive care staff. Differences in pH units as determined by two methods of measurement and nurse satisfaction scores. Litmus paper-tested aspirations versus a meter-read probe located in the tip of the nasogastric tube, measured every 2 hours for 48 hours. A nurse satisfaction assessment form for both measurement methods at entry, 6 months, and 12 months. All measures of association, Pearson's r (0.79), the concordance coefficient (0.74), and eta (0.88), were high. The concordance coefficient measures indicated sufficient agreement between the two methods at the initial and 24 hour measurement times (Cb) = 0.97, 0.97, and 0.94), but not at 48 hours. The meter method indicated prophylaxis was needed when the paper did not, more often than did the paper method (9.3% vs 5.2%). A significant difference between methods was found only at the last reading at 48 hours (z = -2.24, p < .0249). MANOVA revealed that nurses' preference for the meter method was significant (F = 139.48, df = 1.18) and increased over time (F = 4.77, df = 2,36). The gastric probe method of measuring pH is an accurate substitution up to 48 hours for the litmus-paper aspiration method in the postoperative patient who is receiving nothing by mouth. Nurses prefer the gastric probe method of measuring pH over the litmus-paper method because they judge it to be safer, faster, and more accurate.

What Is in the Naming? A 5-Year Longitudinal Study of Early Rapid Naming and Phonological Sensitivity in Relation to Subsequent Reading Skills in Both Native Chinese and English as a Second Language

ERIC Educational Resources Information Center

Pan, Jinger; McBride-Chang, Catherine; Shu, Hua; Liu, Hongyun; Zhang, Yuping; Li, Hong

2011-01-01

Among 262 Chinese children, syllable awareness and rapid automatized naming (RAN) at age 5 years and invented spelling of Pinyin at age 6 years independently predicted subsequent Chinese character recognition and English word reading at ages 8 years and 10 years, even with initial Chinese character reading ability statistically controlled. In…

Speedy Alchemy.

ERIC Educational Resources Information Center

Deininger, Rolf A.; Berger, Carl F., Jr.

1983-01-01

Provides instructions for interfacing a pH meter directly to an Apple II microcomputer without an analog-to-digital converter. Includes program listing (with enough remark statements to make it self-documenting) in Integer Basic to display the pH readings. (Author/JN)

40 CFR 98.395 - Procedures for estimating missing data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... gas liquids, types of biomass, feedstocks, or crude oil batches during any period (e.g., if a meter... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Petroleum Products § 98.395 Procedures...

40 CFR 98.395 - Procedures for estimating missing data.

Code of Federal Regulations, 2011 CFR

2011-07-01

... gas liquids, types of biomass, feedstocks, or crude oil batches during any period (e.g., if a meter... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Petroleum Products § 98.395 Procedures...

40 CFR 98.395 - Procedures for estimating missing data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... gas liquids, types of biomass, feedstocks, or crude oil during any period (e.g., if a meter... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Petroleum Products § 98.395 Procedures...

40 CFR 98.395 - Procedures for estimating missing data.

Code of Federal Regulations, 2012 CFR

2012-07-01

... gas liquids, types of biomass, feedstocks, or crude oil batches during any period (e.g., if a meter... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Petroleum Products § 98.395 Procedures...

40 CFR 98.395 - Procedures for estimating missing data.

Code of Federal Regulations, 2013 CFR

2013-07-01

... gas liquids, types of biomass, feedstocks, or crude oil batches during any period (e.g., if a meter... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Petroleum Products § 98.395 Procedures...

40 CFR 98.397 - Records that must be retained.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., natural gas liquids, and biomass, reporters shall maintain metering, gauging, and other records normally... petroleum products, natural gas liquids, biomass, and feedstocks reported under this subpart. (d) Reporters... carbon share for any petroleum product or natural gas liquid for which CO2 emissions were calculated...

40 CFR 98.397 - Records that must be retained.

Code of Federal Regulations, 2010 CFR

2010-07-01

... gas liquids, biomass, and feedstocks, reporters shall maintain metering, guaging, and other records... quantities of petroleum products, natural gas liquids, biomass, and feedstocks reported under this subpart... of density and carbon share for any petroleum product or natural gas liquid for which CO2 emissions...

Automatic readout micrometer

DOEpatents

Lauritzen, Ted

1982-01-01

A measuring system is disclosed for surveying and very accurately positioning objects with respect to a reference line. A principal use of this surveying system is for accurately aligning the electromagnets which direct a particle beam emitted from a particle accelerator. Prior art surveying systems require highly skilled surveyors. Prior art systems include, for example, optical surveying systems which are susceptible to operator reading errors, and celestial navigation-type surveying systems, with their inherent complexities. The present invention provides an automatic readout micrometer which can very accurately measure distances. The invention has a simplicity of operation which practically eliminates the possibilities of operator optical reading error, owning to the elimination of traditional optical alignments for making measurements. The invention has an extendable arm which carries a laser surveying target. The extendable arm can be continuously positioned over its entire length of travel by either a coarse or fine adjustment without having the fine adjustment outrun the coarse adjustment until a reference laser beam is centered on the target as indicated by a digital readout. The length of the micrometer can then be accurately and automatically read by a computer and compared with a standardized set of alignment measurements. Due to its construction, the micrometer eliminates any errors due to temperature changes when the system is operated within a standard operating temperature range.

Automatic readout micrometer

DOEpatents

Lauritzen, T.

A measuring system is described for surveying and very accurately positioning objects with respect to a reference line. A principle use of this surveying system is for accurately aligning the electromagnets which direct a particle beam emitted from a particle accelerator. Prior art surveying systems require highly skilled surveyors. Prior art systems include, for example, optical surveying systems which are susceptible to operator reading errors, and celestial navigation-type surveying systems, with their inherent complexities. The present invention provides an automatic readout micrometer which can very accurately measure distances. The invention has a simplicity of operation which practically eliminates the possibilities of operator optical reading error, owning to the elimination of traditional optical alignments for making measurements. The invention has an extendable arm which carries a laser surveying target. The extendable arm can be continuously positioned over its entire length of travel by either a coarse of fine adjustment without having the fine adjustment outrun the coarse adjustment until a reference laser beam is centered on the target as indicated by a digital readout. The length of the micrometer can then be accurately and automatically read by a computer and compared with a standardized set of alignment measurements. Due to its construction, the micrometer eliminates any errors due to temperature changes when the system is operated within a standard operating temperature range.

Semiconductor Sequencing Reveals the Diversity of Bacterial Communities in an Amazon Reservoir Considered as a Methane Source

NASA Astrophysics Data System (ADS)

Graças, D. A.; Ramos, R. T.; Sá, P. G.; Baraúna, R. A.; Schneider, M. C.; Silva, A.

2013-05-01

The Amazon region has enormous hydro potential which is used for power generation. In fact, there are several hydroelectric power stations (HPS) already installed and many under construction or designed. It's in the Amazon which the HPS of Tucuruí, fifth largest in the world, is located. The construction of this hydroelectric dam flooded an area of 2,400 km2 of forest that decomposing, releasing greenhouse gases such as methane (CH4). Methane is the most abundant organic gas in the atmosphere and the second most important greenhouse gas. In this study, we use semicondutor sequencing to assess the bacterial diversity along a water column of 70 meters deep in the Tucuruí reservoir. One liter of water was collected every 10 meters along the water column for total DNA extraction. A fragment of approximately 150 base pairs of the 16S rRNA gene was amplified by polymerase chain reaction using universal primers. These fragments were then paralleled sequenced in Ion Torrent® platform using barcodes on the 316 chip. After the quality filters, about 237 thousands reads were obtained, representing more than 300 Mbp. For bacterial diversity analysis, we used only reads longer than 100 base pairs. The taxonomic diversity was obtained from the Ribosomal Database Project Classifier and alpha diversity analysis (diversity indices and rarefaction) was performed using the RDP pyrosequencing pipeline. Although it is recommended for data pyrosequencing, that pipeline is able to process data obtained from semiconductor sequencing once all of them are fasta files. Over 75% of the sequences were not classified in any phylum, which leads us to believe that there is a huge diversity in the bacterial environment whose function is still unclear. Among the sequences that could be classified, there is a predominance of proteobacteria in all layers, but in higher concentrations at the lower layers. Cyanobacteria accounted for about 3% in the layers of 0m and 10m, leading us to conclude that oxygen production is considerable in this layer. The oxygen produced by Cyanobacteria coupled to atmospheric oxygen provides the ideal environment for the methanotrophic bacteria oxidize methane. Indeed, methanotrophic bacteria represented approximately 10% in the upper layers. Another bacterial phylum well represented in the upper layers was Bacteroidetes, which accounted for about 3% in the layers of 0-30m. Rarefaction analyses, using a cutoff of 3%, tell us the existence of 3212, 6657, 10171, 4209, 10533, 74, 24345 and 64683 OTUs for the layers of 0, 10, 20, 30, 40, 50, 60 and 70 meters, respectively. Bacterial diversity seems to increase with depth, probably due to the large amount of organic matter deposited in the pellet. The 50 meter depth layer showed the lowest diversity due to low quality sequencing of this barcode, which hampered the analysis. The abundance of methanotrophic bacteria shows that the microbial profile of the reservoir is able to consume much of the methane produced by methanogenic archaea in the sediment and that there is a huge diversity whose function is still unknown. The use of semiconductor sequencing proved to be a robust tool to analysis of the microbial community, as an alternative to pyrosequencing.

The Role of the Ventral and Dorsal Pathways in Reading Chinese Characters and English Words

ERIC Educational Resources Information Center

Sun, Yafeng; Yang, Yanhui; Desroches, Amy S.; Liu, Li; Peng, Danling

2011-01-01

Previous literature in alphabetic languages suggests that the occipital-temporal region (the ventral pathway) is specialized for automatic parallel word recognition, whereas the parietal region (the dorsal pathway) is specialized for serial letter-by-letter reading (and). However, few studies have directly examined the role of the ventral and…

Poor Children's Fourth-Grade Slump.

ERIC Educational Resources Information Center

Chall, Jeanne S.; Jacobs, Vicki A.

2003-01-01

In a study of second, fourth, and sixth graders who completed reading and language tests over 2 years, low-income second and third graders achieved as well as their normative peers on all subtests. However, around fourth grade, their reading scores began to decline. One possible cause for this slump may stem from lack of fluency and automaticity.…

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, D.M.

Pacific Northwest Laboratory developed this report for the US Navy`s Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC tomore » monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.« less

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, D.M.

Pacific Northwest Laboratory developed this report for the US Navy's Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC tomore » monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.« less

Modeling the relationship between rapid automatized naming and literacy skills across languages varying in orthographic consistency.

PubMed

Georgiou, George K; Aro, Mikko; Liao, Chen-Huei; Parrila, Rauno

2016-03-01

The purpose of this study was twofold: (a) to contrast the prominent theoretical explanations of the rapid automatized naming (RAN)-reading relationship across languages varying in orthographic consistency (Chinese, English, and Finnish) and (b) to examine whether the same accounts can explain the RAN-spelling relationship. In total, 304 Grade 4 children (102 Chinese-speaking Taiwanese children, 117 English-speaking Canadian children, and 85 Finnish-speaking children) were assessed on measures of RAN, speed of processing, phonological processing, orthographic processing, reading fluency, and spelling. The results of path analysis indicated that RAN had a strong direct effect on reading fluency that was of the same size across languages and that only in English was a small proportion of its predictive variance mediated by orthographic processing. In contrast, RAN did not exert a significant direct effect on spelling, and a substantial proportion of its predictive variance was mediated by phonological processing (in Chinese and Finnish) and orthographic processing (in English). Given that RAN predicted reading fluency equally well across languages and that phonological/orthographic processing had very little to do with this relationship, we argue that the reason why RAN is related to reading fluency should be sought in domain-general factors such as serial processing and articulation. Copyright © 2015 Elsevier Inc. All rights reserved.

Automatic Activation of Phonological Code during Visual Word Recognition in Children: A Masked Priming Study in Grades 3 and 5

ERIC Educational Resources Information Center

Sauval, Karinne; Perre, Laetitia; Casalis, Séverine

2017-01-01

The present study aimed to investigate the development of automatic phonological processes involved in visual word recognition during reading acquisition in French. A visual masked priming lexical decision experiment was carried out with third, fifth graders and adult skilled readers. Three different types of partial overlap between the prime and…

Cognitive and Environmental Correlates of Rapid Automatized Naming in Chinese Kindergarten Children

ERIC Educational Resources Information Center

Liu, Cuina; Georgiou, George K.

2017-01-01

Although rapid automatized naming (RAN) is one of the best predictors of reading across languages, its nature remains elusive. In the present study, we aim to elucidate the nature of RAN by examining the cognitive and environmental correlates of RAN. One hundred forty-one second-year kindergarten Chinese children (71 girls, 70 boys; mean age =…

The Use of an Autonomous Pedagogical Agent and Automatic Speech Recognition for Teaching Sight Words to Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Saadatzi, Mohammad Nasser; Pennington, Robert C.; Welch, Karla C.; Graham, James H.; Scott, Renee E.

2017-01-01

In the current study, we examined the effects of an instructional package comprised of an autonomous pedagogical agent, automatic speech recognition, and constant time delay during the instruction of reading sight words aloud to young adults with autism spectrum disorder. We used a concurrent multiple baseline across participants design to…

An Exploration of the Potential of Automatic Speech Recognition to Assist and Enable Receptive Communication in Higher Education

ERIC Educational Resources Information Center

Wald, Mike

2006-01-01

The potential use of Automatic Speech Recognition to assist receptive communication is explored. The opportunities and challenges that this technology presents students and staff to provide captioning of speech online or in classrooms for deaf or hard of hearing students and assist blind, visually impaired or dyslexic learners to read and search…

Automatic-Control System for Safer Brazing

NASA Technical Reports Server (NTRS)

Stein, J. A.; Vanasse, M. A.

1986-01-01

Automatic-control system for radio-frequency (RF) induction brazing of metal tubing reduces probability of operator errors, increases safety, and ensures high-quality brazed joints. Unit combines functions of gas control and electric-power control. Minimizes unnecessary flow of argon gas into work area and prevents electrical shocks from RF terminals. Controller will not allow power to flow from RF generator to brazing head unless work has been firmly attached to head and has actuated micro-switch. Potential shock hazard eliminated. Flow of argon for purging and cooling must be turned on and adjusted before brazing power applied. Provision ensures power not applied prematurely, causing damaged work or poor-quality joints. Controller automatically turns off argon flow at conclusion of brazing so potentially suffocating gas does not accumulate in confined areas.

30 CFR 203.30 - Which leases are eligible for royalty relief as a result of drilling a phase 2 or phase 3 ultra...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 400 meters deep. (b) The lease has not produced gas or oil from a deep well or an ultra-deep well, except as provided in § 203.31(b). (c) If the lease is located entirely in more than 200 meters and entirely less than 400 meters of water, it must either: (1) Have been issued before November 28, 1995, and...

Discuss the testing problems of ultraviolet irradiance meters

NASA Astrophysics Data System (ADS)

Ye, Jun'an; Lin, Fangsheng

2014-09-01

Ultraviolet irradiance meters are widely used in many areas such as medical treatment, epidemic prevention, energy conservation and environment protection, computers, manufacture, electronics, ageing of material and photo-electric effect, for testing ultraviolet irradiance intensity. So the accuracy of value directly affects the sterile control in hospital, treatment, the prevention level of CDC and the control accuracy of curing and aging in manufacturing industry etc. Because the display of ultraviolet irradiance meters is easy to change, in order to ensure the accuracy, it needs to be recalibrated after being used period of time. By the comparison with the standard ultraviolet irradiance meters, which are traceable to national benchmarks, we can acquire the correction factor to ensure that the instruments working under accurate status and giving the accurate measured data. This leads to an important question: what kind of testing device is more accurate and reliable? This article introduces the testing method and problems of the current testing device for ultraviolet irradiance meters. In order to solve these problems, we have developed a new three-dimensional automatic testing device. We introduce structure and working principle of this system and compare the advantages and disadvantages of two devices. In addition, we analyses the errors in the testing of ultraviolet irradiance meters.

49 CFR 192.1005 - What must a gas distribution operator (other than a master meter or small LPG operator) do to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Distribution Pipeline Integrity Management (IM...

An automatic holographic adaptive phoropter

NASA Astrophysics Data System (ADS)

Amirsolaimani, Babak; Peyghambarian, N.; Schwiegerling, Jim; Bablumyan, Arkady; Savidis, Nickolaos; Peyman, Gholam

2017-08-01

Phoropters are the most common instrument used to detect refractive errors. During a refractive exam, lenses are flipped in front of the patient who looks at the eye chart and tries to read the symbols. The procedure is fully dependent on the cooperation of the patient to read the eye chart, provides only a subjective measurement of visual acuity, and can at best provide a rough estimate of the patient's vision. Phoropters are difficult to use for mass screenings requiring a skilled examiner, and it is hard to screen young children and the elderly etc. We have developed a simplified, lightweight automatic phoropter that can measure the optical error of the eye objectively without requiring the patient's input. The automatic holographic adaptive phoropter is based on a Shack-Hartmann wave front sensor and three computercontrolled fluidic lenses. The fluidic lens system is designed to be able to provide power and astigmatic corrections over a large range of corrections without the need for verbal feedback from the patient in less than 20 seconds.

Automatic Quadcopter Control Avoiding Obstacle Using Camera with Integrated Ultrasonic Sensor

NASA Astrophysics Data System (ADS)

Anis, Hanafi; Haris Indra Fadhillah, Ahmad; Darma, Surya; Soekirno, Santoso

2018-04-01

Automatic navigation on the drone is being developed these days, a wide variety of types of drones and its automatic functions. Drones used in this study was an aircraft with four propellers or quadcopter. In this experiment, image processing used to recognize the position of an object and ultrasonic sensor used to detect obstacle distance. The method used to trace an obsctacle in image processing was the Lucas-Kanade-Tomasi Tracker, which had been widely used due to its high accuracy. Ultrasonic sensor used to complement the image processing success rate to be fully detected object. The obstacle avoidance system was to observe at the program decisions from some obstacle conditions read by the camera and ultrasonic sensors. Visual feedback control based PID controllers are used as a control of drones movement. The conclusion of the obstacle avoidance system was to observe at the program decisions from some obstacle conditions read by the camera and ultrasonic sensors.

[Automatic mechanical chest compression during helicopter transportation].

PubMed

Kyrval, Helle S; Ahmad, Khalil

2010-11-15

We describe a case story with a drowned, hypothermic trauma patient treated with an automatic mechanical chest compression device during helicopter transportation to a trauma center. After falling from a 25 meter high bridge into 2 °C water, she was rescued lifeless 17 minutes later. Advanced life support was initiated. During transport by a rescue helicopter, chest compressions were effectively provided by Lund University Cardiopulmonary Assist System (LUCAS). Upon arrival to a trauma centre approx. 60 minutes later, the patient was treated with extracorporal circulation and rewarmed. She was eventually discharged to her home with minor loss of cerebral function.

Performance of Thermal Mass Flow Meters in a Variable Gravitational Environment

NASA Technical Reports Server (NTRS)

Brooker, John E.; Ruff, Gary A.

2004-01-01

The performance of five thermal mass flow meters, MKS Instruments 179A and 258C, Unit Instruments UFM-8100, Sierra Instruments 830L, and Hastings Instruments HFM-200, were tested on the KC-135 Reduced Gravity Aircraft in orthogonal, coparallel, and counterparallel orientations relative to gravity. Data was taken throughout the parabolic trajectory where the g-level varied from 0.01 to 1.8 times normal gravity. Each meter was calibrated in normal gravity in the orthogonal position prior to flight followed by ground testing at seven different flow conditions to establish a baseline operation. During the tests, the actual flow rate was measured independently using choked-flow orifices. Gravitational acceleration and attitude had a unique effect on the performance of each meter. All meters operated within acceptable limits at all gravity levels in the calibrated orthogonal position. However, when operated in other orientations, the deviations from the reference flow became substantial for several of the flow meters. Data analysis indicated that the greatest source of error was the effect of orientation, followed by the gravity level. This work emphasized that when operating thermal flow meters in a variable gravity environment, it is critical to orient the meter in the same direction relative to gravity in which it was calibrated. Unfortunately, there was no test in normal gravity that could predict the performance of a meter in reduced gravity. When operating in reduced gravity, all meters indicated within 5 percent of the full scale reading at all flow conditions and orientations.

Automatic external filling for the ion source gas bottle of a Van de Graaff accelerator

NASA Astrophysics Data System (ADS)

Strivay, D.; Bastin, T.; Dehove, C.; Dumont, P. D.; Marchal, A.; Garnir, H.; Weber, G.

1997-09-01

We describe a fully automatic system we developed to fill, from an external gas bottle, the ion source terminal gas storage bottle of a 2 MV Van de Graaff accelerator without depressing the 25 bar insulating gas. The system is based on a programmable automate ordering electropneumatical valves. The only manual operation is the connection of the external gas cylinder. The time needed for a gas change is reduced to typically 15 min (depending on the residual pressure wished for the gas removed from the terminal bottle). To check this system we study the ionic composition of the ion beam delivered by our accelerator after different gas changes. The switching magnet of our accelerator was used to analyse the ionic composition of the accelerated beams in order to verify the degree of elimination of the previous gases in the system.

De Minimis Thresholds for Federal Building Metering Appropriateness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Jordan W.

2015-03-31

The U.S. Department of Energy (DOE) is required by statute and Presidential Memorandum to establish guidelines for agencies to meter their Federal buildings for energy (electricity, natural gas, and steam) and water. See 42 U.S.C. § 8253(e). DOE issued guidance in February 2006 on the installation of electric meters in Federal buildings. A recent update to the 2006 guidance accounts for more current metering practices within the Federal Government. The updated metering guidance specifies that all Federal buildings shall be considered “appropriate” for energy or water metering unless identified for potential exclusion. In developing the updated guidance to carry outmore » the statue, Congress also directed DOE to (among other things) establish exclusions from the metering requirements based on the de minimis quantity of energy use of a Federal building, industrial process, or structure. This paper discusses the method used to identify de minimis values.« less

A fast and automatic mosaic method for high-resolution satellite images

NASA Astrophysics Data System (ADS)

Chen, Hongshun; He, Hui; Xiao, Hongyu; Huang, Jing

2015-12-01

We proposed a fast and fully automatic mosaic method for high-resolution satellite images. First, the overlapped rectangle is computed according to geographical locations of the reference and mosaic images and feature points on both the reference and mosaic images are extracted by a scale-invariant feature transform (SIFT) algorithm only from the overlapped region. Then, the RANSAC method is used to match feature points of both images. Finally, the two images are fused into a seamlessly panoramic image by the simple linear weighted fusion method or other method. The proposed method is implemented in C++ language based on OpenCV and GDAL, and tested by Worldview-2 multispectral images with a spatial resolution of 2 meters. Results show that the proposed method can detect feature points efficiently and mosaic images automatically.

Cryogenic flow rate measurement with a laser Doppler velocimetry standard

NASA Astrophysics Data System (ADS)

Maury, R.; Strzelecki, A.; Auclercq, C.; Lehot, Y.; Loubat, S.; Chevalier, J.; Ben Rayana, F.

2018-03-01

A very promising alternative to the state-of-the-art static volume measurements for liquefied natural gas (LNG) custody transfer processes is the dynamic principle of flow metering. As the Designated Institute (DI) of the LNE (‘Laboratoire National de métrologie et d’Essais’, being the French National Metrology Institute) for high-pressure gas flow metering, Cesame-Exadebit is involved in various research and development programs. Within the framework of the first (2010-2013) and second (2014-2017) EURAMET Joint Research Project (JRP), named ‘Metrological support for LNG custody transfer and transport fuel applications’, Cesame-Exadebit explored a novel cryogenic flow metering technology using laser Doppler velocimetry (LDV) as an alternative to ultrasonic and Coriolis flow metering. Cesame-Exadebit is trying to develop this technique as a primary standard for cryogenic flow meters. Currently, cryogenic flow meters are calibrated at ambient temperatures with water. Results are then extrapolated to be in the Reynolds number range of real applications. The LDV standard offers a unique capability to perform online calibration of cryogenic flow meters in real conditions (temperature, pressure, piping and real flow disturbances). The primary reference has been tested on an industrial process in a LNG terminal during truck refuelling. The reference can calibrate Coriolis flow meters being used daily with all the real environmental constraints, and its utilisation is transparent for LNG terminal operators. The standard is traceable to Standard International units and the combined extended uncertainties have been determined and estimated to be lower than 0.6% (an ongoing improvement to reducing the correlation function uncertainty, which has a major impact in the uncertainty estimation).

24 CFR 3280.707 - Heat producing appliances.

Code of Federal Regulations, 2014 CFR

2014-04-01

... have a flue loss of not more than 25 percent, and a thermal efficiency of not less than that specified... efficiency. (1) All automatic electric storage water heaters installed in manufactured homes shall have a standby loss not exceeding 43 watts/meter2 (4 watts/ft2) of tank surface area. The method of test for...

The use of matic (automatic transmission of motorcycle) as catamaran boat engine to support economic activities in Ujung Pangkah, Gresik

NASA Astrophysics Data System (ADS)

Sunardi; Sukandar; Setionohadi, B.; Sulkhani, E.; Sambah, A. B.; Pamungkas, S.

2018-04-01

River is the only access to enter the pond area in Ujung Pangkah District, Gresik. The area is difficult to access due to the siltation of the river with only 50 cm depth. In addition, rent for traditional boat is expensive. This research developed a design of a small boat efficient enough to transport fish farmer from and to the pond area. Engine from motorcycle was used as it was easy to operate and economical use of fuel. The fundamental change for this design was a small double-hulled low-lane vessel. The motor matic engine was adjusted to a propeller to get maximum boost. The results showed that a ship with 3 meters length, 1.2 meters width and 1 m height, 2 persons in charge and speed of 7 knots, could use 150cc automatic motor engine by lowering engine rotation (RPM) from 7000 RPM to 4500 RPM using a Gear Box and 4-leaf B-Serries blades with a diameter of 14 cm.

Automatic comic page image understanding based on edge segment analysis

NASA Astrophysics Data System (ADS)

Liu, Dong; Wang, Yongtao; Tang, Zhi; Li, Luyuan; Gao, Liangcai

2013-12-01

Comic page image understanding aims to analyse the layout of the comic page images by detecting the storyboards and identifying the reading order automatically. It is the key technique to produce the digital comic documents suitable for reading on mobile devices. In this paper, we propose a novel comic page image understanding method based on edge segment analysis. First, we propose an efficient edge point chaining method to extract Canny edge segments (i.e., contiguous chains of Canny edge points) from the input comic page image; second, we propose a top-down scheme to detect line segments within each obtained edge segment; third, we develop a novel method to detect the storyboards by selecting the border lines and further identify the reading order of these storyboards. The proposed method is performed on a data set consisting of 2000 comic page images from ten printed comic series. The experimental results demonstrate that the proposed method achieves satisfactory results on different comics and outperforms the existing methods.

Prick test: evolution towards automated reading.

PubMed

Justo, X; Díaz, I; Gil, J J; Gastaminza, G

2016-08-01

The prick test is one of the most common medical methods for diagnosing allergies, and it has been carried out in a similar and laborious manner over many decades. In an attempt to standardize the reading of the test, many researchers have tried to automate the process of measuring the allergic reactions found by developing systems and algorithms based on multiple technologies. This work reviews the techniques for automatic wheal measurement with the aim of pointing out their advantages and disadvantages and the progress in the field. Furthermore, it provides a classification scheme for the different technologies applied. The works discussed herein provide evidence that significant challenges still exist for the development of an automatic wheal measurement system that not only helps allergists in their medical practice but also allows for the standardization of the reading and data exchange. As such, the aim of the work was to serve as guideline for the development of a proper and feasible system. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Teaching Children to Become Fluent and Automatic Readers

PubMed Central

Kuhn, Melanie R.; Schwanenflugel, Paula J.; Morris, Robin D.; Morrow, Lesley Mandel; Woo, Deborah Gee; Meisinger, Elizabeth B.; Sevcik, Rose A.; Bradley, Barbara A.; Stahl, Steven A.

2009-01-01

The purpose of the study was to examine the effects of two instructional approaches designed to improve the reading fluency of 2nd-grade children. The first approach was based on Stahl and Heubach’s (2005) fluency-oriented reading instruction (FORI) and involved the scaffolded, repeated reading of grade-level texts over the course of each week. The second was a wide-reading approach that also involved scaffolded instruction. hut that incorporated the reading of 3 different grade-level texts each week and provicled significantly less opportunity for repetition. By the end of the school year. FORI and wide-reading approaches showed similar benefits for standardized measures of word reading efficiency and reading comprehension skills compared to control approachcs. although the benefits of the wide-reading approach emerged earlier and included oral text reading fluency skill. Thus, we conclude that fluency instruction that emphasizes extensive oral reading of grade-level text using scaffolded approaches is effective for promoting reading development in young learners. PMID:19946472

Advanced technologies and devices for inhalational anesthetic drug dosing.

PubMed

Meyer, J-U; Kullik, G; Wruck, N; Kück, K; Manigel, J

2008-01-01

Technological advances in micromechanics, optical sensing, and computing have led to innovative and reliable concepts of precise dosing and sensing of modern volatile anesthetics. Mixing of saturated desflurane flow with fresh gas flow (FGF) requires differential pressure sensing between the two circuits for precise delivery. The medical gas xenon is administered most economically in a closed circuit breathing system. Sensing of xenon in the breathing system is achieved with miniaturized and unique gas detector systems. Innovative sensing principles such as thermal conductivity and sound velocity are applied. The combination of direct injection of volatile anesthetics and low-flow in a closed circuit system requires simultaneous sensing of the inhaled and exhaled gas concentrations. When anesthetic conserving devices are used for sedation with volatile anesthetics, regular gas concentration monitoring is advised. High minimal alveolar concentration (MAC) of some anesthetics and low-flow conditions bear the risk of hypoxic gas delivery. Oxygen sensing based on paramagnetic thermal transduction has become the choice when long lifetime and one-time calibration are required. Compact design of beam splitters, infrared filters, and detectors have led to multiple spectra detector systems that fit in thimble-sized housings. Response times of less than 500 ms allow systems to distinguish inhaled from exhaled gas concentrations. The compact gas detector systems are a prerequisite to provide "quantitative anesthesia" in closed circuit feedback-controlled breathing systems. Advanced anesthesia devices in closed circuit mode employ multiple feedback systems. Multiple feedbacks include controls of volume, concentrations of anesthetics, and concentration of oxygen with a corresponding safety system. In the ideal case, the feedback system delivers precisely what the patient is consuming. In this chapter, we introduce advanced technologies and device concepts for delivering inhalational anesthetic drugs. First, modern vaporizers are described with special attention to the particularities of delivering desflurane. Delivery of xenon is presented, followed by a discussion of direct injection of volatile anesthetics and of a device designed to conserve anesthetic drugs. Next, innovative sensing technologies are presented for reliable control and precise metering of the delivered volatile anesthetics. Finally, we discuss the technical challenges of automatic control in low-flow and closed circuit breathing systems in anesthesia.

Prototype Automatic Target Screener.

DTIC Science & Technology

1980-05-19

JLIST OF TABLES I Table Page 1 PATS Modules 4 2 Vector Read/Write Command Format ( SEL4 ) 29 1 3 Read Vector Data Command Format ( SEL4 ) 30 J 4 Use Matrix...VECTOR READ/WRITE COMMAND FORMAT ( SEL4 ) S 1,4A Output 15 14 1:3 12 11 10 9 8 7 6 5 4 3 2 1 0 Da taI To VNUM VDIR V LEN InterfaceIT TNT = 1 Intensify...elements ! | 29 I TABLE 3. READ VECTOR DATA COMMAND FORMAT ( SEL4 ) SEL4 Read Vector Data Input 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Da ta D D V To 0 A D

40 CFR 90.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sampling probe. (2) Exhaust flow metering system. A dilute exhaust flow metering system must be used to... exhaust. The background probe must draw a representative sample of the background air during each sampling... (bag) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe...

40 CFR 90.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sampling probe. (2) Exhaust flow metering system. A dilute exhaust flow metering system must be used to... exhaust. The background probe must draw a representative sample of the background air during each sampling... (bag) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe...

40 CFR 90.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sampling probe. (2) Exhaust flow metering system. A dilute exhaust flow metering system must be used to... exhaust. The background probe must draw a representative sample of the background air during each sampling... (bag) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe...

40 CFR 90.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sampling probe. (2) Exhaust flow metering system. A dilute exhaust flow metering system must be used to... exhaust. The background probe must draw a representative sample of the background air during each sampling... (bag) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe...

40 CFR 90.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sampling probe. (2) Exhaust flow metering system. A dilute exhaust flow metering system must be used to... exhaust. The background probe must draw a representative sample of the background air during each sampling... (bag) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe...

Meter shop equipment, techniques, and operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, R.F.

1995-12-01

The development of new equipment inevitably results in new techniques and operational procedures to be implemented. Innovative techniques can result in operational changes and the development of new equipment. An operational modification opens the door for the development of new ideas, new equipment, and new techniques. This constant cycle of change promotes a continuous series of economic evaluations and decisions. Equipment and technological changes in measuring natural gas have resulted in modifications from past practices. The changes underway today will influence the way we plan and budget for the future, and, most notably, will change the way we repair gasmore » meters. The meter shop of today will need to look at the way that these changes will become available and how they will help efforts in reducing costs and increasing productivity. For instance, the standard three- and four-chambered diaphragm gas meter design has not been significantly changed in the past few decades aside from having heavy, cast iron bodies changed to lightweight aluminum bodies and utilizing a few plastic parts. But changes have been made, and more are on the threshold.« less

Evaluating a Computer-Based Sight-Word Reading Intervention in a Student with Intellectual Disabilities

ERIC Educational Resources Information Center

Yaw, Jared; Skinner, Christopher H.; Orsega, Michael C.; Parkhurst, John; Booher, Joshua; Chambers, Karen

2012-01-01

The authors used a multiple-baseline-across-behaviors (i.e., word lists) design to evaluate a computer-based flashcard intervention on automatic sight-word reading in a 4th-grade student with moderate to severe intellectual disabilities. Immediately after the intervention was applied to each of three lists of sight words, the student made rapid…

Elucidating the Component Processes Involved in Dyslexic and Non-Dyslexic Reading Fluency: An Eye-Tracking Study

ERIC Educational Resources Information Center

Jones, Manon W.; Obregon, Mateo; Kelly, M. Louise; Branigan, Holly P.

2008-01-01

The relationship between rapid automatized naming (RAN) and reading fluency is well documented (see Wolf, M. & Bowers, P.G. (1999). "The double-deficit hypothesis for the 'developmental dyslexias.'" "Journal of Educational Psychology," 91(3), 415-438, for a review), but little is known about which component processes are important in RAN, and why…

Mapping Educational Equity and Reform Policy in the Borderlands: LatCrit Spatial Analysis of Grade Retention

ERIC Educational Resources Information Center

Rodríguez, Cristóbal; Amador, Adam; Tarango, B. Abigail

2016-01-01

The purpose of our study is to investigate reform policy, specifically a proposed third grade reading retention policy within the Borderlands. Under this policy, students not performing proficiently on the third grade reading standardized exam will be automatically retained in the third grade. The research methods and approach used in this study…

The Role of Categorical Speech Perception and Phonological Processing in Familial Risk Children With and Without Dyslexia.

PubMed

Hakvoort, Britt; de Bree, Elise; van der Leij, Aryan; Maassen, Ben; van Setten, Ellie; Maurits, Natasha; van Zuijen, Titia L

2016-12-01

This study assessed whether a categorical speech perception (CP) deficit is associated with dyslexia or familial risk for dyslexia, by exploring a possible cascading relation from speech perception to phonology to reading and by identifying whether speech perception distinguishes familial risk (FR) children with dyslexia (FRD) from those without dyslexia (FRND). Data were collected from 9-year-old FRD (n = 37) and FRND (n = 41) children and age-matched controls (n = 49) on CP identification and discrimination and on the phonological processing measures rapid automatized naming, phoneme awareness, and nonword repetition. The FRD group performed more poorly on CP than the FRND and control groups. Findings on phonological processing align with the literature in that (a) phonological processing related to reading and (b) the FRD group showed the lowest phonological processing outcomes. Furthermore, CP correlated weakly with reading, but this relationship was fully mediated by rapid automatized naming. Although CP phonological skills are related to dyslexia, there was no strong evidence for a cascade from CP to phonology to reading. Deficits in CP at the behavioral level are not directly associated with dyslexia.

How Does Reading Performance Modulate the Impact of Orthographic Knowledge on Speech Processing? A Comparison of Normal Readers and Dyslexic Adults

ERIC Educational Resources Information Center

Pattamadilok, Chotiga; Nelis, Aubéline; Kolinsky, Régine

2014-01-01

Studies on proficient readers showed that speech processing is affected by knowledge of the orthographic code. Yet, the automaticity of the orthographic influence depends on task demand. Here, we addressed this automaticity issue in normal and dyslexic adult readers by comparing the orthographic effects obtained in two speech processing tasks that…

Rapid automatized naming (RAN) in children with ADHD: An ex-Gaussian analysis.

PubMed

Ryan, Matthew; Jacobson, Lisa A; Hague, Cole; Bellows, Alison; Denckla, Martha B; Mahone, E Mark

2017-07-01

Children with ADHD demonstrate increased frequent "lapses" in performance on tasks in which the stimulus presentation rate is externally controlled, leading to increased variability in response times. It is less clear whether these lapses are also evident during performance on self-paced tasks, e.g., rapid automatized naming (RAN), or whether RAN inter-item pause time variability uniquely predicts reading performance. A total of 80 children aged 9 to 14 years-45 children with attention-deficit/hyperactivity disorder (ADHD) and 35 typically developing (TD) children-completed RAN and reading fluency measures. RAN responses were digitally recorded for analyses. Inter-stimulus pause time distributions (excluding between-row pauses) were analyzed using traditional (mean, standard deviation [SD], coefficient of variation [CV]) and ex-Gaussian (mu, sigma, tau) methods. Children with ADHD were found to be significantly slower than TD children (p < .05) on RAN letter naming mean response time as well as on oral and silent reading fluency. RAN response time distributions were also significantly more variable (SD, tau) in children with ADHD. Hierarchical regression revealed that the exponential component (tau) of the letter-naming response time distribution uniquely predicted reading fluency in children with ADHD (p < .001, ΔR 2  = .16), even after controlling for IQ, basic reading, ADHD symptom severity and age. The findings suggest that children with ADHD (without word-level reading difficulties) manifest slowed performance on tasks of reading fluency; however, this "slowing" may be due in part to lapses from ongoing performance that can be assessed directly using ex-Gaussian methods that capture excessively long response times.

METHANE EMISSIONS FROM THE NATURAL GAS INDUSTRY VOLUME 15: GAS-ASSISTED GLYCOL PUMPS

EPA Science Inventory

The 15-volume report summarizes the results of a comprehensive program to quantify methane (CH4) emissions from the U.S. natural gas industry for the base year. The objective was to determine CH4 emissions from the wellhead and ending downstream at the customer's meter. The accur...

49 CFR 192.1015 - What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Distribution Pipeline Integrity Management (IM) § 192.1015 What must...

Primary flow meter for calibrating a sniffer test leak artefact by a pressure rise method

NASA Astrophysics Data System (ADS)

Arai, Kenta; Yoshida, Hajime

2014-10-01

Sniffer tests are used to locate leaks in equipment during operation. The sensitivity of a sniffer leak detector must be calibrated against a known gas flow to atmospheric pressure generated by a sniffer test leak artefact. We have developed a primary flow meter for calibrating gas flows to atmospheric pressure through the leak artefact. The flow meter is based on a pressure rise method and two chambers are used to measure the pressure rise with small uncertainty even at atmospheric pressure. The calibration range of the flow rate is 5 × 10-7 Pa m3 s-1 to 7 × 10-4 Pa m3 s-1 to atmospheric pressure at 23.0 °C with a minimum uncertainty of 1.4% (k = 2), as well as 4 × 10-8 Pa m3 s-1 to 5 × 10-4 Pa m3 s-1 to a vacuum at 23.0 °C. The long term stability of the flow meter was determined as 0.41% by repeated measurements of the conductance of the leak artefact. In case of the flow rate into a vacuum, the flow meter was successfully linked to the international reference value of CCM.P-K12 by a lab-internal comparison.

Direct measurements show decreasing methane emissions from natural gas local distribution systems in the United States.

PubMed

Lamb, Brian K; Edburg, Steven L; Ferrara, Thomas W; Howard, Touché; Harrison, Matthew R; Kolb, Charles E; Townsend-Small, Amy; Dyck, Wesley; Possolo, Antonio; Whetstone, James R

2015-04-21

Fugitive losses from natural gas distribution systems are a significant source of anthropogenic methane. Here, we report on a national sampling program to measure methane emissions from 13 urban distribution systems across the U.S. Emission factors were derived from direct measurements at 230 underground pipeline leaks and 229 metering and regulating facilities using stratified random sampling. When these new emission factors are combined with estimates for customer meters, maintenance, and upsets, and current pipeline miles and numbers of facilities, the total estimate is 393 Gg/yr with a 95% upper confidence limit of 854 Gg/yr (0.10% to 0.22% of the methane delivered nationwide). This fraction includes emissions from city gates to the customer meter, but does not include other urban sources or those downstream of customer meters. The upper confidence limit accounts for the skewed distribution of measurements, where a few large emitters accounted for most of the emissions. This emission estimate is 36% to 70% less than the 2011 EPA inventory, (based largely on 1990s emission data), and reflects significant upgrades at metering and regulating stations, improvements in leak detection and maintenance activities, as well as potential effects from differences in methodologies between the two studies.

Relative accuracy of the BD Logic and FreeStyle blood glucose meters.

PubMed

2007-04-01

The BD Logic((R)) (Becton, Dickinson and Co., Franklin Lakes, NJ) and FreeStyle((R)) (Abbott Diabetes Care, Alameda, CA) meters are used to transmit data directly to insulin pumps for calculation of insulin doses and to calibrate continuous glucose sensors as well as to monitor blood glucose levels. The accuracy of the two meters was evaluated in two inpatient studies conducted by the Diabetes Research in Children Network (DirecNet). In both studies, meter glucose measurements made with either venous or capillary blood were compared with reference glucose measurements made by the DirecNet Central Laboratory at the University of Minnesota using a hexokinase enzymatic method. The BD Logic tended to read lower than the laboratory reference regardless of whether venous (median difference = -9 mg/dL) or capillary blood (median difference = -7 mg/dL) was used. This resulted in lower accuracy of the BD Logic compared with the FreeStyle meter based on the median relative absolute difference (RAD) for both venous blood (median RAD, 9% vs. 5%, P < 0.001) and capillary blood (median RAD, 11% vs. 6%, P = 0.008). The greatest discrepancy in the performance of the two meters was at higher reference glucose values. Accuracy was not significantly different when the reference was < or = 70 mg/dL. The BD Logic meter is less accurate than the FreeStyle meter.

The Effects of Reading Fluency Interventions on the Reading Fluency and Reading Comprehension Performance of Elementary Students With Learning Disabilities: A Synthesis of the Research from 2001 to 2014

PubMed Central

Stevens, Elizabeth A.; Walker, Melodee A.; Vaughn, Sharon

2016-01-01

Fluent word reading is hypothesized to facilitate reading comprehension by improving automatic word reading, thus releasing a reader’s cognitive resources to focus on meaning. Many students with learning disabilities (LD) struggle to develop reading fluency, which affects reading comprehension. This synthesis extends Chard, Vaughn, and Tyler’s (2002) review, synthesizing fluency intervention research from 2001 to 2014. The search yielded 19 studies examining reading fluency and comprehension outcomes of reading fluency interventions for students with LD in kindergarten through 5th grade. Results showed repeated reading (RR), multicomponent interventions, and assisted reading with audiobooks produced gains in reading fluency and comprehension. Providing a model of fluent reading and performance feedback, using easier level text, setting a performance criterion, and practicing RR with peers also contributed to improved outcomes. Findings suggest that RR remains the most effective intervention for improving reading fluency for students with LD. Limitations include sample size, only three group design studies, and infrequent use of standardized measures. PMID:27067939

The Effects of Reading Fluency Interventions on the Reading Fluency and Reading Comprehension Performance of Elementary Students With Learning Disabilities: A Synthesis of the Research from 2001 to 2014.

PubMed

Stevens, Elizabeth A; Walker, Melodee A; Vaughn, Sharon

Fluent word reading is hypothesized to facilitate reading comprehension by improving automatic word reading, thus releasing a reader's cognitive resources to focus on meaning. Many students with learning disabilities (LD) struggle to develop reading fluency, which affects reading comprehension. This synthesis extends Chard, Vaughn, and Tyler's (2002) review, synthesizing fluency intervention research from 2001 to 2014. The search yielded 19 studies examining reading fluency and comprehension outcomes of reading fluency interventions for students with LD in kindergarten through 5th grade. Results showed repeated reading (RR), multicomponent interventions, and assisted reading with audiobooks produced gains in reading fluency and comprehension. Providing a model of fluent reading and performance feedback, using easier level text, setting a performance criterion, and practicing RR with peers also contributed to improved outcomes. Findings suggest that RR remains the most effective intervention for improving reading fluency for students with LD. Limitations include sample size, only three group design studies, and infrequent use of standardized measures.

Dynamic Control of Adsorption Sensitivity for Photo-EMF-Based Ammonia Gas Sensors Using a Wireless Network

PubMed Central

Vashpanov, Yuriy; Choo, Hyunseung; Kim, Dongsoo Stephen

2011-01-01

This paper proposes an adsorption sensitivity control method that uses a wireless network and illumination light intensity in a photo-electromagnetic field (EMF)-based gas sensor for measurements in real time of a wide range of ammonia concentrations. The minimum measurement error for a range of ammonia concentration from 3 to 800 ppm occurs when the gas concentration magnitude corresponds with the optimal intensity of the illumination light. A simulation with LabView-engineered modules for automatic control of a new intelligent computer system was conducted to improve measurement precision over a wide range of gas concentrations. This gas sensor computer system with wireless network technology could be useful in the chemical industry for automatic detection and measurement of hazardous ammonia gas levels in real time. PMID:22346680

[Occupational exposure to gases emitted in mild and stainless steel welding].

PubMed

Matczak, W; Gromiec, J

2001-01-01

The objective of this work was to select optimal methods for determination of toxic gases (NOx, NO2, CO, CO2, O3) and to evaluate occupational exposure of welders to those gases. The survey covered workers employed in shipyards, and other metal product fabrication plants engaged in welding mild and stainless steel by different techniques (manual metal are, metal active gas, tungsten inert gas welding; gas, plasma, laser cutting and resistance welding). Personal and stationary air samples were collected to determine time weighted average (TWA) and short-term concentrations of gases. For determination of nitrogen oxides the following analytical techniques were employed: spectrophotometry with collection on liquid and solid sorbents and ion chromatography with collection on solid sorbents. All the gases were determined also by automatic or direct reading methods: flow or diffusion detector tubes and photometric and electrochemical analyzers. The determined TWA concentrations were below respective Maximum Allowable Concentrations (MAC) but exposure limits for short term exposure were exceeded in some cases. The average NO2 i NOx ratio was 1:4. According to Polish regulations regarding the MAC value for nitrogen oxides the analytical method should enable determination of total NOx by either direct or indirect simultaneous determination of both NO and NO2. The applicability of the spectrophotometric method of analysis of atmospheric NOx to determination of low NOx concentrations at welders working posts has been confirmed.

900-m high gas plumes rising from marine sediments containing structure II hydrates at Vestnesa Ridge, offshore W-Svalbard

NASA Astrophysics Data System (ADS)

Smith, Andrew J.; Mienert, Jürgen; Bünz, Stefan; Greinert, Jens; Rasmussen, Tine L.

2013-04-01

We study an arctic sediment drift in ~1200 m water depth at Vestnesa Ridge, offshore western Svalbard. The ridge is spotted with pockmarks that range in size from a few meters to hundreds of meters in diameter and centimeters to tens of meters in height (e.g. Vogt et al., 1994). There is a strong negative-polarity seismic reflection below the ridge that is interpreted to record a negative impedance contrast marking the boundary between gas hydrate and water above and free gas and water below: it is the bottom-simulating reflector (BSR). Seismically transparent zones, interpreted as gas chimneys, extend from pockmarks at the seafloor to depths below the BSR (180-220 meters below the seafloor) (Bünz et al., 2012). Gas flares, gas hydrate, and methane-seep-specific biological communities (pogonphora and begiatoa bacterial mats) have been observed adjacent to pockmarks at the ridge (Bünz et al., 2012). We present new single-beam echosounding data that were acquired during 2010 and 2012 cruises on the R/V Helmer Hanssen at Vestnesa Ridge using a Simrad EK60 system that operates at frequencies of 18 and 38 kHz. During both cruises which lasted 3-5 days, we detected continuous bubble release from 4 separate pockmarks in 2010 and 6 separate pockmarks in 2012. There were no noticeable, short-term (hourly or daily) variations in the bubble release from the pockmarks, indicating that the venting from the pockmarks does not undergo rapid changes. Plumes from the pockmarks rise between 875 to 925m above the seafloor to a final water depth of 325 to 275m, respectively. This depth is in excellent agreement with the top of the hydrate stability zone (275 meters below sea level) for the gas composition of hydrate sampled at the ridge (96.31% C1; 3.36% C2; 0.21% C3; 0.11% IC4; 0.01% NC4). This suggests that hydrate skins are forming around the gas bubbles, inhibiting the dissolution of gas, and allowing the bubbles to rise to such great heights in the water column. Our results provide hard constraints for bubble-dissolution models (e.g. McGinnis et al., 2006) that can validate whether a gas-hydrate-rimmed bubble can survive the ~900m rise through the water column. Long-term monitoring of such gas-hydrate and fluid-flow systems is important for quantifying methane fluxes to the ocean, for identifying the source(s) of the venting gas, and for better understanding the environmental conditions under which deep-sea biological communities exist. References Bünz, S., Polyanov, S., Vadakkepuliyambatta, S., Consolaro, C., and Mienert, J., 2012, Active gas venting through hydrate-bearing sediments on the Vestnesa Ridge, offshore W-Svalbard. : Marine Geology v. 332-334, p. 189-197. McGinnis, D.F., Greinert, J., Artemov, Y., Beaubien, S.E., and Wüest, A., 2006, The fate of rising methane bubbles in stratified waters: What fraction reaches the atmosphere?: Journal of Geophysical Research, v. 111, C09007, doi:10.1029/2005JC003183. Vogt, P. R., Crane, K., Sundvor, E., Max, M. D., and Pfirman, S. L., 1994, Methane-generated(?) pockmarks on young, thickly sedimented oceanic crust in the Arctic: Vestnesa ridge, Fram strait: Geology, v. 22, no. 3, p. 255-258.

Arterial blood gas reference values for sea level and an altitude of 1,400 meters.

PubMed

Crapo, R O; Jensen, R L; Hegewald, M; Tashkin, D P

1999-11-01

Blood gas measurements were collected on healthy lifetime nonsmokers at sea level (n = 96) and at an altitude of 1,400 meters (n = 243) to establish reference equations. At each study site, arterial blood samples were analyzed in duplicate on two separate blood gas analyzers and CO-oximeters. Arterial blood gas variables included Pa(O(2)), Pa(CO(2)), pH, and calculated alveolar-arterial PO(2) difference (AaPO(2)). CO-oximeter variables were Hb, COHb, MetHb, and Sa(O(2)). Subjects were 18 to 81 yr of age with 166 male and 173 female. Outlier data were excluded from multiple regression analysis, and reference equations were fitted to the data in two ways: (1) best fit using linear, squared, and cross-product terms; (2) simple equations, including only the variables that explained at least 3% of the variance. Two sets of equations were created: (1) using only the sea level data and (2) using the combined data with barometric pressure as an independent variable. Comparisons with earlier studies revealed small but significant differences; the decline in Pa(O(2)) with age at each altitude was consistent with most previous studies. At sea level, the equation that included barometric pressure predicted Pa(O(2)) slightly better than the sea level specific equation. The inclusion of barometric pressure in the equations allows better prediction of blood gas reference values at sea level and at altitudes as high as 1,400 meters.

Using aerial infrared thermography to detect utility theft of service

NASA Astrophysics Data System (ADS)

Stockton, Gregory R.; Lucas, R. Gillem

2012-06-01

Natural gas and electric utility companies, public utility commissions, consumer advocacy groups, city governments, state governments and the federal government United States continue to turn a blind eye towards utility energy theft of service which we conservatively estimate is in excess of 10 billion a year. Why? Many in the United States have exhausted their unemployment benefits. The amounts for federal funding for low income heating assistance programs (LIHEAP) funds were cut by nearly 40% for 2012 to 3.02 billion. "At peak funding ($5.1 billion in 2009), the program was national in scale but still only had enough resources to support roughly 1/4 of the eligible households.i" Contributions to charities are down and the number of families below the poverty line who are unable to pay to heat their houses continues to rise. Many of the less fortunate in our society now consider theft and fraud to be an attractive option for their supply of natural gas and/or electricity. A record high mild winter in 2011-2012 coupled with 10-year low natural gas prices temporarily obscured the need for low income heating assistance programs (LIHEAPs) from the news and federal budgets, but cold winters will return. The proliferation of smart meters and automated meter infrastructures across our nation can do little to detect energy theft because the thieves can simply by-pass the meters, jumper around the meters and/or steal meters from abandoned houses and use them. Many utility systems were never set-up to stop these types of theft. Even with low-cost per identified thief method using aerial infrared thermography, utilities continue to ignore theft detection.

Depth of processing in the stroop task: evidence from a novel forced-reading condition.

PubMed

Eidels, Ami; Ryan, Kathryn; Williams, Paul; Algom, Daniel

2014-01-01

The presence of the Stroop effect betrays the fact that the carrier words were read in the face of instructions to ignore them and to respond to the target ink colors. In this study, we probed the nature of this involuntary reading by comparing color performance with that in a new forced-reading Stroop task in which responding is strictly contingent on reading each and every word. We found larger Stroop effects in the forced-reading task than in the classic Stroop task and concluded that words are processed to a shallower level in the Stroop task than they are in routine voluntary reading. The results show that the two modes of word processing differ in systematic ways and are conductive to qualitatively different representations. These results can pose a challenge to the strongly automatic view of word reading in the Stroop task.

Tuning fork enhanced interferometric photoacoustic spectroscopy: a new method for trace gas analysis

NASA Astrophysics Data System (ADS)

Köhring, M.; Pohlkötter, A.; Willer, U.; Angelmahr, M.; Schade, W.

2011-01-01

A photoacoustic trace gas sensor based on an optical read-out method of a quartz tuning fork is shown. Instead of conventional piezoelectric signal read-out, as applied in well-known quartz-enhanced photoacoustic spectroscopy (QEPAS), an interferometric read-out method for measurement of the tuning fork's oscillation is presented. To demonstrate the potential of the optical read-out of tuning forks in photoacoustics, a comparison between the performances of a sensor with interferometric read-out and conventional QEPAS with piezoelectric read-out is reported. The two sensors show similar characteristics. The detection limit (L) for the optical read-out is determined to be L opt=(2598±84) ppm (1 σ) compared to L elec=(2579±78) ppm (1 σ) for piezoelectric read-out. In both cases the detection limit is defined by the thermal noise of the tuning fork.

Thermocouple Extension-Wire-Connections and Low Temperatures

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Mitchell, Mark; Richardson, Gregory

2000-01-01

Experiments were carried out to determine the casue of erroneous readings from thermocouples of type K when measuring temperatures of liquid hydrogen. It was believed to be linked to te temperature of the connector used to extend the thermocouple wires to the voltage meter.

76 FR 76707 - El Paso Natural Gas Company: Notice of Intent To Prepare an Environmental Assessment for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... long, 16-inch diameter lateral pipeline to connect the Douglas Meter Station to EPNG's existing Line No. 2164; The replacement of compressor modules and station yard piping at the existing Willcox Compressor Station; Expansion of the existing Douglas Meter Station by installing updated flow control and pressure...

46 CFR 181.410 - Fixed gas fire extinguishing systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... less than 170 cubic meters (6000 cubic feet), release of an extinguishing agent into a space must... unoccupied space of less than 170 cubic meters (6,000 cubic feet) may have the storage cylinders located... between 16,550 and 19,300 kPa (2,400 and 2,800 psi) must be installed in the distribution manifold to...

NASA/Navy lift/cruise fan. Phase 1: Design summary

NASA Technical Reports Server (NTRS)

1977-01-01

The initial design of the LCF459 lift/cruise fan system is documented. The LCF459 is a 1.5 meter diameter turbotip lift/cruise fan whose design point pressure ratio is 1.32 at a tip speed of 353 meters per second. The gas source for the tip turbine is the YJ97-GE-100 engine.

Alternative Fuels Data Center

Science.gov Websites

-of-Use rates are available in two variations: EV-TOU-2 bills home and vehicle electricity use on a single meter; and EV-TOU bills vehicle electricity use separately, requiring the installation of a second meter. Lower rates are also available to customers who own a natural gas vehicle and use a qualified

76 FR 27956 - Airworthiness Directives; Eurocopter Deutschland Model EC135 Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... past, the FADEC FAIL caution light illuminated on a few EC135 T1 helicopters. They state that this was... transmitted to the FADEC. This discrepancy led to the display of the FADEC FAIL caution light and ``freezing... to automatically meter fuel, indicated by a FADEC FAIL cockpit caution light, and subsequent loss of...

The Effects of Using Flashcards to Develop Automaticity with Key Vocabulary Words for Students with and without Learning Disabilities Enrolled in a High School Spanish Course

ERIC Educational Resources Information Center

Stager, Phillip A.

2010-01-01

The purpose of this study was to investigate the effects of using flashcards to develop automaticity (rapid word recognition) with key vocabulary words and phrases in order to improve fluency and reading comprehension skills for participants with and without diagnosed learning disabilities enrolled in a high school Spanish course. Eighty-seven…

The Effect of Orthographic Depth on Letter String Processing: The Case of Visual Attention Span and Rapid Automatized Naming

ERIC Educational Resources Information Center

Antzaka, Alexia; Martin, Clara; Caffarra, Sendy; Schlöffel, Sophie; Carreiras, Manuel; Lallier, Marie

2018-01-01

The present study investigated whether orthographic depth can increase the bias towards multi-letter processing in two reading-related skills: visual attention span (VAS) and rapid automatized naming (RAN). VAS (i.e., the number of visual elements that can be processed at once in a multi-element array) was tested with a visual 1-back task and RAN…

An Examination of a Small-Group Decoding Intervention for Struggling Readers: Comparing Accuracy and Automaticity Criteria

ERIC Educational Resources Information Center

Hudson, Roxanne F.; Isakson, Carole; Richman, Taylor; Lane, Holly B.; Arriaza-Allen, Stephanie

2011-01-01

In this study, we compared methods to improve the decoding and reading fluency of struggling readers. Second-grade poor readers were randomly assigned to one of the two practice conditions within a repeated reading intervention. Both interventions were in small groups, were 20-28 min long, took place 2-4 days per week, and consisted of phonemic…

Text Comprehension in Chinese Children: Relative Contribution of Verbal Working Memory, Pseudoword Reading, Rapid Automated Naming, and Onset-Rime Phonological Segmentation

ERIC Educational Resources Information Center

Leong, Che Kan; Tse, Shek Kam; Loh, Ka Yee; Hau, Kit Tai

2008-01-01

The present study examined the role of verbal working memory (memory span, tongue twister), 2-character Chinese pseudoword reading, rapid automatized naming (letters, numbers), and phonological segmentation (deletion of rimes and onsets) in inferential text comprehension in Chinese in 518 Chinese children in Hong Kong in Grades 3 to 5. It was…

Gait analysis--precise, rapid, automatic, 3-D position and orientation kinematics and dynamics.

PubMed

Mann, R W; Antonsson, E K

1983-01-01

A fully automatic optoelectronic photogrammetric technique is presented for measuring the spatial kinematics of human motion (both position and orientation) and estimating the inertial (net) dynamics. Calibration and verification showed that in a two-meter cube viewing volume, the system achieves one millimeter of accuracy and resolution in translation and 20 milliradians in rotation. Since double differentiation of generalized position data to determine accelerations amplifies noise, the frequency domain characteristics of the system were investigated. It was found that the noise and all other errors in the kinematic data contribute less than five percent error to the resulting dynamics.

Comparison of accuracy of fibrosis degree classifications by liver biopsy and non-invasive tests in chronic hepatitis C.

PubMed

Boursier, Jérôme; Bertrais, Sandrine; Oberti, Frédéric; Gallois, Yves; Fouchard-Hubert, Isabelle; Rousselet, Marie-Christine; Zarski, Jean-Pierre; Calès, Paul

2011-11-30

Non-invasive tests have been constructed and evaluated mainly for binary diagnoses such as significant fibrosis. Recently, detailed fibrosis classifications for several non-invasive tests have been developed, but their accuracy has not been thoroughly evaluated in comparison to liver biopsy, especially in clinical practice and for Fibroscan. Therefore, the main aim of the present study was to evaluate the accuracy of detailed fibrosis classifications available for non-invasive tests and liver biopsy. The secondary aim was to validate these accuracies in independent populations. Four HCV populations provided 2,068 patients with liver biopsy, four different pathologist skill-levels and non-invasive tests. Results were expressed as percentages of correctly classified patients. In population #1 including 205 patients and comparing liver biopsy (reference: consensus reading by two experts) and blood tests, Metavir fibrosis (FM) stage accuracy was 64.4% in local pathologists vs. 82.2% (p < 10-3) in single expert pathologist. Significant discrepancy (≥ 2FM vs reference histological result) rates were: Fibrotest: 17.2%, FibroMeter2G: 5.6%, local pathologists: 4.9%, FibroMeter3G: 0.5%, expert pathologist: 0% (p < 10-3). In population #2 including 1,056 patients and comparing blood tests, the discrepancy scores, taking into account the error magnitude, of detailed fibrosis classification were significantly different between FibroMeter2G (0.30 ± 0.55) and FibroMeter3G (0.14 ± 0.37, p < 10-3) or Fibrotest (0.84 ± 0.80, p < 10-3). In population #3 (and #4) including 458 (359) patients and comparing blood tests and Fibroscan, accuracies of detailed fibrosis classification were, respectively: Fibrotest: 42.5% (33.5%), Fibroscan: 64.9% (50.7%), FibroMeter2G: 68.7% (68.2%), FibroMeter3G: 77.1% (83.4%), p < 10-3 (p < 10-3). Significant discrepancy (≥ 2 FM) rates were, respectively: Fibrotest: 21.3% (22.2%), Fibroscan: 12.9% (12.3%), FibroMeter2G: 5.7% (6.0%), FibroMeter3G: 0.9% (0.9%), p < 10-3 (p < 10-3). The accuracy in detailed fibrosis classification of the best-performing blood test outperforms liver biopsy read by a local pathologist, i.e., in clinical practice; however, the classification precision is apparently lesser. This detailed classification accuracy is much lower than that of significant fibrosis with Fibroscan and even Fibrotest but higher with FibroMeter3G. FibroMeter classification accuracy was significantly higher than those of other non-invasive tests. Finally, for hepatitis C evaluation in clinical practice, fibrosis degree can be evaluated using an accurate blood test.

Comparison of accuracy of fibrosis degree classifications by liver biopsy and non-invasive tests in chronic hepatitis C

PubMed Central

2011-01-01

Background Non-invasive tests have been constructed and evaluated mainly for binary diagnoses such as significant fibrosis. Recently, detailed fibrosis classifications for several non-invasive tests have been developed, but their accuracy has not been thoroughly evaluated in comparison to liver biopsy, especially in clinical practice and for Fibroscan. Therefore, the main aim of the present study was to evaluate the accuracy of detailed fibrosis classifications available for non-invasive tests and liver biopsy. The secondary aim was to validate these accuracies in independent populations. Methods Four HCV populations provided 2,068 patients with liver biopsy, four different pathologist skill-levels and non-invasive tests. Results were expressed as percentages of correctly classified patients. Results In population #1 including 205 patients and comparing liver biopsy (reference: consensus reading by two experts) and blood tests, Metavir fibrosis (FM) stage accuracy was 64.4% in local pathologists vs. 82.2% (p < 10-3) in single expert pathologist. Significant discrepancy (≥ 2FM vs reference histological result) rates were: Fibrotest: 17.2%, FibroMeter2G: 5.6%, local pathologists: 4.9%, FibroMeter3G: 0.5%, expert pathologist: 0% (p < 10-3). In population #2 including 1,056 patients and comparing blood tests, the discrepancy scores, taking into account the error magnitude, of detailed fibrosis classification were significantly different between FibroMeter2G (0.30 ± 0.55) and FibroMeter3G (0.14 ± 0.37, p < 10-3) or Fibrotest (0.84 ± 0.80, p < 10-3). In population #3 (and #4) including 458 (359) patients and comparing blood tests and Fibroscan, accuracies of detailed fibrosis classification were, respectively: Fibrotest: 42.5% (33.5%), Fibroscan: 64.9% (50.7%), FibroMeter2G: 68.7% (68.2%), FibroMeter3G: 77.1% (83.4%), p < 10-3 (p < 10-3). Significant discrepancy (≥ 2 FM) rates were, respectively: Fibrotest: 21.3% (22.2%), Fibroscan: 12.9% (12.3%), FibroMeter2G: 5.7% (6.0%), FibroMeter3G: 0.9% (0.9%), p < 10-3 (p < 10-3). Conclusions The accuracy in detailed fibrosis classification of the best-performing blood test outperforms liver biopsy read by a local pathologist, i.e., in clinical practice; however, the classification precision is apparently lesser. This detailed classification accuracy is much lower than that of significant fibrosis with Fibroscan and even Fibrotest but higher with FibroMeter3G. FibroMeter classification accuracy was significantly higher than those of other non-invasive tests. Finally, for hepatitis C evaluation in clinical practice, fibrosis degree can be evaluated using an accurate blood test. PMID:22129438

Effortful versus automatic emotional processing in schizophrenia: Insights from a face-vignette task.

PubMed

Patrick, Regan E; Rastogi, Anuj; Christensen, Bruce K

2015-01-01

Adaptive emotional responding relies on dual automatic and effortful processing streams. Dual-stream models of schizophrenia (SCZ) posit a selective deficit in neural circuits that govern goal-directed, effortful processes versus reactive, automatic processes. This imbalance suggests that when patients are confronted with competing automatic and effortful emotional response cues, they will exhibit diminished effortful responding and intact, possibly elevated, automatic responding compared to controls. This prediction was evaluated using a modified version of the face-vignette task (FVT). Participants viewed emotional faces (automatic response cue) paired with vignettes (effortful response cue) that signalled a different emotion category and were instructed to discriminate the manifest emotion. Patients made less vignette and more face responses than controls. However, the relationship between group and FVT responding was moderated by IQ and reading comprehension ability. These results replicate and extend previous research and provide tentative support for abnormal conflict resolution between automatic and effortful emotional processing predicted by dual-stream models of SCZ.

Computerized Bone Age Estimation Using Deep Learning Based Program: Evaluation of the Accuracy and Efficiency.

PubMed

Kim, Jeong Rye; Shim, Woo Hyun; Yoon, Hee Mang; Hong, Sang Hyup; Lee, Jin Seong; Cho, Young Ah; Kim, Sangki

2017-12-01

The purpose of this study is to evaluate the accuracy and efficiency of a new automatic software system for bone age assessment and to validate its feasibility in clinical practice. A Greulich-Pyle method-based deep-learning technique was used to develop the automatic software system for bone age determination. Using this software, bone age was estimated from left-hand radiographs of 200 patients (3-17 years old) using first-rank bone age (software only), computer-assisted bone age (two radiologists with software assistance), and Greulich-Pyle atlas-assisted bone age (two radiologists with Greulich-Pyle atlas assistance only). The reference bone age was determined by the consensus of two experienced radiologists. First-rank bone ages determined by the automatic software system showed a 69.5% concordance rate and significant correlations with the reference bone age (r = 0.992; p < 0.001). Concordance rates increased with the use of the automatic software system for both reviewer 1 (63.0% for Greulich-Pyle atlas-assisted bone age vs 72.5% for computer-assisted bone age) and reviewer 2 (49.5% for Greulich-Pyle atlas-assisted bone age vs 57.5% for computer-assisted bone age). Reading times were reduced by 18.0% and 40.0% for reviewers 1 and 2, respectively. Automatic software system showed reliably accurate bone age estimations and appeared to enhance efficiency by reducing reading times without compromising the diagnostic accuracy.

Correlation of lycopene measured by HPLC with the L, a, b color readings of a hydroponic tomato and the relationship of maturity with color and lycopene content

NASA Technical Reports Server (NTRS)

Arias, R.; Lee, T. C.; Logendra, L.; Janes, H.

2000-01-01

Tomatoes (Lycopersicon esculentum cv. Laura) were separated, according to the ripening stage, by a sensory panel into seven groups, and color was measured on the tomato surface with a Minolta Chroma meter. The L, a, b, hue, chroma, and lycopene content were plotted against the maturity stages of the tomatoes, and several good correlations were found. The a/b ratio and the lycopene content were the parameters that allowed six of seven maturity groups in the tomato to be statistically distinguished. The lycopene content, measured by HPLC, was also correlated with the color measurements, and the a, a/b, and (a/b)(2) color factors produced the best regressions. An estimation of the lycopene content in tomatoes can be achieved by using a portable chroma meter, with a possible field usage application. Equations to calculate the lycopene content of tomatoes based on the color readings are reported.

Efficacy of the ejector flow-meter. A scavenging device for anaesthetic gases.

PubMed

Obel, D; Jørgensen, S; Ferguson, A; Frandsen, K

1985-01-01

Measurements of air concentrations of nitrous oxide and halothane in the breathing zone of the anaesthetist and the operating-room nurse were carried out during inhalation anaesthesia with a Mapleson D system. Gas removal was performed from inside the breathing system at the same rate as that of the fresh gas inflow by means of an ejector flow-meter. The concentrations of nitrous oxide and halothane were maintained below the Danish Threshold Limit Values of 100 and 5 parts per million, respectively, by using this type of scavenging. When these anaesthetics were used simultaneously, the reduced Threshold Limit Values were not exceeded during endotracheal anaesthesia.

Distributed gas sensing with optical fibre photothermal interferometry.

PubMed

Lin, Yuechuan; Liu, Fei; He, Xiangge; Jin, Wei; Zhang, Min; Yang, Fan; Ho, Hoi Lut; Tan, Yanzhen; Gu, Lijuan

2017-12-11

We report the first distributed optical fibre trace-gas detection system based on photothermal interferometry (PTI) in a hollow-core photonic bandgap fibre (HC-PBF). Absorption of a modulated pump propagating in the gas-filled HC-PBF generates distributed phase modulation along the fibre, which is detected by a dual-pulse heterodyne phase-sensitive optical time-domain reflectometry (OTDR) system. Quasi-distributed sensing experiment with two 28-meter-long HC-PBF sensing sections connected by single-mode transmission fibres demonstrated a limit of detection (LOD) of ∼10 ppb acetylene with a pump power level of 55 mW and an effective noise bandwidth (ENBW) of 0.01 Hz, corresponding to a normalized detection limit of 5.5ppb⋅W/Hz. Distributed sensing experiment over a 200-meter-long sensing cable made of serially connected HC-PBFs demonstrated a LOD of ∼ 5 ppm with 62.5 mW peak pump power and 11.8 Hz ENBW, or a normalized detection limit of 312ppb⋅W/Hz. The spatial resolution of the current distributed detection system is limited to ∼ 30 m, but it is possible to reduce down to 1 meter or smaller by optimizing the phase detection system.