Dust cyclone research in the 21st century

USDA-ARS?s Scientific Manuscript database

Research to meet the demand for ever more efficient dust cyclones continues after some eighty years. Recent trends emphasize design optimization through computational fluid dynamics (CFD) and testing design subtleties not modeled by semi-empirical equations. Improvements to current best available ...

Rocket Design for the Future

NASA Technical Reports Server (NTRS)

Follett, William W.; Rajagopal, Raj

2001-01-01

The focus of the AA MDO team is to reduce product development cost through the capture and automation of best design and analysis practices and through increasing the availability of low-cost, high-fidelity analysis. Implementation of robust designs reduces costs associated with the Test-Fall-Fix cycle. RD is currently focusing on several technologies to improve the design process, including optimization and robust design, expert and rule-based systems, and collaborative technologies.

Automated mixed traffic vehicle design AMTV 2

NASA Technical Reports Server (NTRS)

Johnston, A. R.; Marks, R. A.; Cassell, P. L.

1982-01-01

The design of an improved and enclosed Automated Mixed Traffic Transit (AMTT) vehicle is described. AMTT is an innovative concept for low-speed tram-type transit in which suitable vehicles are equipped with sensors and controls to permit them to operate in an automated mode on existing road or walkway surfaces. The vehicle chassis and body design are presented in terms of sketches and photographs. The functional design of the sensing and control system is presented, and modifications which could be made to the baseline design for improved performance, in particular to incorporate a 20-mph capability, are also discussed. The vehicle system is described at the block-diagram-level of detail. Specifications and parameter values are given where available.

Seat Belts: Are They the Best Solution to the Real Problem?

ERIC Educational Resources Information Center

Comeau, Lee F.

1985-01-01

More children are killed outside their school buses than inside. To solve this problem, we should improve bus design, provide driver training programs for all school bus drivers, utilize the latest safety devices available, and improve ridership safety curriculum. (MLF)

Multi-mission Ni-H2 battery cell for the 1990's

NASA Technical Reports Server (NTRS)

Miller, Lee; Brill, Jack; Dodson, Gary

1989-01-01

A sufficient production, test and operational database is now available to permit design technology optimization for the next decade. The evolved battery cell design features standardized technology intended to support multiple type missions (e.g., both GEO and LEO). Design analyses and validation test cells demonstrate improved performance plus attractive specific-energy characteristics will be achieved.

Evaluation of FSO System Availability in Haze Condition

NASA Astrophysics Data System (ADS)

Anis, A. A.; Rashidi, C. B. M.; Aljunid, S. A.; Rahman, A. K.

2018-03-01

In this paper, we proposed the evaluation of FSO system availability in haze condition. The atmospheric attenuation by weather conditions in the atmosphere as the most challenging problem of FSO system as the system performance is severely degraded and causing the signal optic to be transmitted poorly. The effects of haze condition on the performance of FSO system is stressed out and focused in this paper. From the evaluation of the analysis, designs of FSO system are proposed to obtain a system with improved link performance in haze conditions. The scattering coefficient and the atmospheric attenuation are determined using Beer’s Lambert equation. From the research, the link performance of the system is greatly improved using Design 2 with minimum BER of 10-127127 and maximu m Q Factor of 23.98. The FSO system using Design 2 has better performance compared to Design 1 in haze condition as the optical signals could penetrate the dense haze better without losing much optical power during the transmission to the scattering.

A Water Vapor Differential Absorption LIDAR Design for Unpiloted Aerial Vehicles

NASA Technical Reports Server (NTRS)

DeYoung, Russell J.; Mead, Patricia F.

2004-01-01

This system study proposes the deployment of a water vapor Differential Absorption LIDAR (DIAL) system on an Altair unmanned aerial vehicle (UAV) platform. The Altair offers improved payload weight and volume performance, and longer total flight time as compared to other commercial UAV's. This study has generated a preliminary design for an Altair based water vapor DIAL system. The design includes a proposed DIAL schematic, a review of mechanical challenges such as temperature and humidity stresses on UAV deployed DIAL systems, an assessment of the available capacity for additional instrumentation (based on the proposed design), and an overview of possible weight and volume improvements associated with the use of customized electronic and computer hardware, and through the integration of advanced fiber-optic and laser products. The results of the study show that less than 17% of the available weight, less than 19% of the volume capacity, and approximately 11% of the electrical capacity is utilized by the proposed water vapor DIAL system on the Altair UAV.

Axisymmetric inlet minimum weight design method

NASA Technical Reports Server (NTRS)

Nadell, Shari-Beth

1995-01-01

An analytical method for determining the minimum weight design of an axisymmetric supersonic inlet has been developed. The goal of this method development project was to improve the ability to predict the weight of high-speed inlets in conceptual and preliminary design. The initial model was developed using information that was available from inlet conceptual design tools (e.g., the inlet internal and external geometries and pressure distributions). Stiffened shell construction was assumed. Mass properties were computed by analyzing a parametric cubic curve representation of the inlet geometry. Design loads and stresses were developed at analysis stations along the length of the inlet. The equivalent minimum structural thicknesses for both shell and frame structures required to support the maximum loads produced by various load conditions were then determined. Preliminary results indicated that inlet hammershock pressures produced the critical design load condition for a significant portion of the inlet. By improving the accuracy of inlet weight predictions, the method will improve the fidelity of propulsion and vehicle design studies and increase the accuracy of weight versus cost studies.

The UMLS Knowledge Source Server: an experience in Web 2.0 technologies.

PubMed

Thorn, Karen E; Bangalore, Anantha K; Browne, Allen C

2007-10-11

The UMLS Knowledge Source Server (UMLSKS), developed at the National Library of Medicine (NLM), makes the knowledge sources of the Unified Medical Language System (UMLS) available to the research community over the Internet. In 2003, the UMLSKS was redesigned utilizing state-of-the-art technologies available at that time. That design offered a significant improvement over the prior version but presented a set of technology-dependent issues that limited its functionality and usability. Four areas of desired improvement were identified: software interfaces, web interface content, system maintenance/deployment, and user authentication. By employing next generation web technologies, newer authentication paradigms and further refinements in modular design methods, these areas could be addressed and corrected to meet the ever increasing needs of UMLSKS developers. In this paper we detail the issues present with the existing system and describe the new system's design using new technologies considered entrants in the Web 2.0 development era.

Finalizing the DTAG: Implementation and Testing of Design Improvements for Reliability and Availability

DTIC Science & Technology

2015-09-30

acoustics and fine scale motion. The success of the Dtag has resulted in an increased demand for the instrument from researchers both within the...sensor blocks sound when the animal is close to the surface. The polyethylene shell was eliminated in the Dtag-3 design to improve acoustic ...into 3 main sub-assemblies (Figure 5): 1) foam sub-assembly, 2) sensor sub-assembly, and 3) Electronics sub-assembly. This separation enables rapid

Teaching Insect Retinal Physiology with Newly Designed, Inexpensive Micromanipulators

ERIC Educational Resources Information Center

Krans, Jacob; Gilbert, Cole; Hoy, Ron

2006-01-01

In this article, we detail how to produce two inexpensive micromanipulators that offer high precision (approximately 25 micrometers) along a single axis of movement. The more expensive of the designs provides improved versatility along multiple axes. Both manipulators offer substantial savings over commercially available micromanipulators with…

76 FR 70130 - Environmental Impacts Statements; Notice of Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... Transmission Line, Plan-of-Operation Permit, Kootenai National Forest, Sanders County, MT, Comment Period Ends..., Coconino National Forest Travel Management Project, Proposes to Designate a System of Road and Motorized..., Proposed On-the-Ground Treatments to Improve Forest Health and Improve or Protect Red Squirrel Habitat...

A Switching-Mode Power Supply Design Tool to Improve Learning in a Power Electronics Course

ERIC Educational Resources Information Center

Miaja, P. F.; Lamar, D. G.; de Azpeitia, M.; Rodriguez, A.; Rodriguez, M.; Hernando, M. M.

2011-01-01

The static design of ac/dc and dc/dc switching-mode power supplies (SMPS) relies on a simple but repetitive process. Although specific spreadsheets, available in various computer-aided design (CAD) programs, are widely used, they are difficult to use in educational applications. In this paper, a graphic tool programmed in MATLAB is presented,…

Multi-mission Ni-H2 battery cells for the 1990's

NASA Technical Reports Server (NTRS)

Miller, Lee; Brill, Jack; Dodson, Gary

1989-01-01

A sufficient production, test and operational database is now available to permit design technology optimization for the next decade. The evolved battery cell design features standardized technology intended to support multiple type missions (e.g., both GEO and LEO). Design analysis and validation test cells demonstrate that improved performance plus attractive specific-energy characteristics will be achieved.

Advanced Technology Spark-Ignition Aircraft Piston Engine Design Study

NASA Technical Reports Server (NTRS)

Stuckas, K. J.

1980-01-01

The advanced technology, spark ignition, aircraft piston engine design study was conducted to determine the improvements that could be made by taking advantage of technology that could reasonably be expected to be made available for an engine intended for production by January 1, 1990. Two engines were proposed to account for levels of technology considered to be moderate risk and high risk. The moderate risk technology engine is a homogeneous charge engine operating on avgas and offers a 40% improvement in transportation efficiency over present designs. The high risk technology engine, with a stratified charge combustion system using kerosene-based jet fuel, projects a 65% improvement in transportation efficiency. Technology enablement program plans are proposed herein to set a timetable for the successful integration of each item of required advanced technology into the engine design.

Assessing strategies for increasing urban routine immunization coverage of childhood vaccines in low and middle-income countries: A systematic review of peer-reviewed literature.

PubMed

Nelson, Kristin N; Wallace, Aaron S; Sodha, Samir V; Daniels, Danni; Dietz, Vance

2016-11-04

Immunization programs in developing countries increasingly face challenges to ensure equitable delivery of services within cities where rapid urban growth can result in informal settlements, poor living conditions, and heterogeneous populations. A number of strategies have been utilized in developing countries to ensure high community demand and equitable availability of urban immunization services; however, a synthesis of the literature on these strategies has not previously been undertaken. We reviewed articles published in English in peer-reviewed journals between 1990 and 2013 that assessed interventions for improving routine immunization coverage in urban areas in low- and middle-income countries. We categorized the intervention in each study into one of three groups: (1) interventions aiming to increase utilization of immunization services; (2) interventions aiming to improve availability of immunization services by healthcare providers, or (3) combined availability and utilization interventions. We summarized the main quantitative outcomes from each study and effective practices from each intervention category. Fifteen studies were identified; 87% from the African, Eastern Mediterranean and Southeast Asian regions of the World Health Organization (WHO). Six studies were randomized controlled trials, eight were pre- and post-intervention evaluations, and one was a cross-sectional study. Four described interventions designed to improve availability of routine immunization services, six studies described interventions that aimed to increase utilization, and five studies aiming to improve both availability and utilization of services. All studies reported positive change in their primary outcome indicator, although seven different primary outcomes indicators were used across studies. Studies varied considerably with respect to the type of intervention assessed, study design, and length of intervention assessment. Few studies have assessed interventions designed explicitly for the unique challenges facing immunization programs in urban areas. Further research on sustainability, scalability, and cost-effectiveness of interventions is needed to fill this gap. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing strategies for increasing urban routine immunization coverage of childhood vaccines in low and middle-income countries: A systematic review of peer-reviewed literature

PubMed Central

Nelson, Kristin N.; Wallace, Aaron S.; Sodha, Samir V.; Daniels, Danni; Dietz, Vance

2016-01-01

Introduction Immunization programs in developing countries increasingly face challenges to ensure equitable delivery of services within cities where rapid urban growth can result in informal settlements, poor living conditions, and heterogeneous populations. A number of strategies have been utilized in developing countries to ensure high community demand and equitable availability of urban immunization services; however, a synthesis of the literature on these strategies has not previously been undertaken. Methods We reviewed articles published in English in peer-reviewed journals between 1990 and 2013 that assessed interventions for improving routine immunization coverage in urban areas in low- and middle-income countries. We categorized the intervention in each study into one of three groups: (1) interventions aiming to increase utilization of immunization services; (2) interventions aiming to improve availability of immunization services by healthcare providers, or (3) combined availability and utilization interventions. We summarized the main quantitative outcomes from each study and effective practices from each intervention category. Results Fifteen studies were identified; 87% from the African, Eastern Mediterranean and Southeast Asian regions of the World Health Organization (WHO). Six studies were randomized controlled trials, eight were pre- and post-intervention evaluations, and one was a cross-sectional study. Four described interventions designed to improve availability of routine immunization services, six studies described interventions that aimed to increase utilization, and five studies aiming to improve both availability and utilization of services. All studies reported positive change in their primary outcome indicator, although seven different primary outcomes indicators were used across studies. Studies varied considerably with respect to the type of intervention assessed, study design, and length of intervention assessment. Conclusion Few studies have assessed interventions designed explicitly for the unique challenges facing immunization programs in urban areas. Further research on sustainability, scalability, and cost-effectiveness of interventions is needed to fill this gap. PMID:27692772

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoessel, Chris

2013-11-13

This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency ofmore » a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.« less

Finalizing the Dtag: implementation and testing of design improvements for reliability and availability

DTIC Science & Technology

2016-10-14

ABSTRACT DTAGs have proven to be a valuable tool for the study of marine mammal acoustics and fine scale motion. The success of the DTAG has resulted in...Underwater Acoustics , Digital Communications 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a. REPORT b. ABSTRACT c. THIS PAGE ABSTRACT u u u...continuously monitor and improve the tag design.\\ OBJECTIVES Dtags have proven to be a valuable tool for the study of marine mammal acoustics and fine

AOTV Low L/D Preliminary Aeroheating Design Environment

NASA Technical Reports Server (NTRS)

Engel, C. D.

1983-01-01

The aerothermal environment to a configuration with a brake face which exhibits a low lift to drag ratio (L/D) of below 0.75 is emphasized. The five times geosynchronous (5 x Geo) orbit entry was selected as the design trajectory. The available data base and math model is discussed. The resulting preliminary design environment is documented. Recommendations as to how the design environment may be improved through technological advances are given.

Propagation Impact on Modern HF (High Frequency) Communications System Design

DTIC Science & Technology

1986-03-01

received SNR is maximised and interference avoided. As a general principle, system availability and reliability should be improved by the use of...LECTURE SERIES No. 145 propagation Impact on Modern HF Communications System Design. NORTH ATLANTIC TREATY ORGANIZATION gS ^, DISTRIBUTION ...civil and military communities for high frequency communications. It will discuss concepts of real time channel evaluation , system design, as well as

Improving the K-12 Online Course Design Review Process: Experts Weigh in on iNACOL National Standards for Quality Online Courses

ERIC Educational Resources Information Center

Adelstein, David; Barbour, Michael K.

2017-01-01

Within the K-12 online learning environment there are a variety of standards that designers can utilize when creating online courses. To date, the only research-based standards available are proprietary in manner. As such, many jurisdictions have begun adopting online course design standards from the leading advocacy organization, which that have…

Design of testbed and emulation tools

NASA Technical Reports Server (NTRS)

Lundstrom, S. F.; Flynn, M. J.

1986-01-01

The research summarized was concerned with the design of testbed and emulation tools suitable to assist in projecting, with reasonable accuracy, the expected performance of highly concurrent computing systems on large, complete applications. Such testbed and emulation tools are intended for the eventual use of those exploring new concurrent system architectures and organizations, either as users or as designers of such systems. While a range of alternatives was considered, a software based set of hierarchical tools was chosen to provide maximum flexibility, to ease in moving to new computers as technology improves and to take advantage of the inherent reliability and availability of commercially available computing systems.

A Project to Design and Build Compact Heat Exchangers

ERIC Educational Resources Information Center

Davis, Richard A.

2005-01-01

Students designed and manufactured compact, shell-and-tube heat exchangers in a project-based learning exercise integrated with our heat transfer course. The heat exchangers were constructed from common building materials available at home improvement centers. The cost of materials for a device was less than $20. The project gave students…

The Microgravity Isolation Mount (MGIM): A Columbus facility for improving the microgravity quality of payloads

NASA Technical Reports Server (NTRS)

Owen, R. G.; Jones, D. I.; Owens, A. R.; Roberts, G.; Hadfield, P.

1992-01-01

The Microgravity Isolation Mount (MGIM) is a facility for providing active vibration isolation for sensitive experiments on the Columbus Attached Laboratory and the Columbus Free-Flying Laboratory. The facility is designed to be accommodated in a standard Columbus rack, and it iterfaces with existing rack utility services. The design is based on a non-contact strategy, whereby the payload 'floats' inside the rack, and its position is controlled by a number of magnetic actuators. The main advantage of using this non-contact strategy is the improved microgravity quality available. The overall design of the facility and a description of its elements are given.

Who Moved My Curriculum? Leadership Preparation Programs and the Core Technology of Schools

ERIC Educational Resources Information Center

Doolittle, Gini; Browne, Evelyn Gallagher

2011-01-01

This cross-case study utilizes the publically available data of three urban low-performing, low-socioeconomic-status districts designated as "districts in need of improvement" under No Child Left Behind legislation. Despite multiple interventions aimed at improving student learning, these and other districts remain in corrective action.…

New PDC bit design reduces vibrational problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mensa-Wilmot, G.; Alexander, W.L.

1995-05-22

A new polycrystalline diamond compact (PDC) bit design combines cutter layout, load balancing, unsymmetrical blades and gauge pads, and spiraled blades to reduce problematic vibrations without limiting drilling efficiency. Stabilization improves drilling efficiency and also improves dull characteristics for PDC bits. Some PDC bit designs mitigate one vibrational mode (such as bit whirl) through drilling parameter manipulation yet cause or excite another vibrational mode (such as slip-stick). An alternative vibration-reducing concept which places no limitations on the operational environment of a PDC bit has been developed to ensure optimization of the bit`s available mechanical energy. The paper discusses bit stabilization,more » vibration reduction, vibration prevention, cutter arrangement, load balancing, blade layout, spiraled blades, and bit design.« less

Management Systems, Patient Quality Improvement, Resource Availability, and Substance Abuse Treatment Quality

PubMed Central

Fields, Dail; Roman, Paul M; Blum, Terry C

2012-01-01

Objective To examine the relationships among general management systems, patient-focused quality management/continuous process improvement (TQM/CPI) processes, resource availability, and multiple dimensions of substance use disorder (SUD) treatment. Data Sources/Study Setting Data are from a nationally representative sample of 221 SUD treatment centers through the National Treatment Center Study (NTCS). Study Design The design was a cross-sectional field study using latent variable structural equation models. The key variables are management practices, TQM/continuous quality improvement (CQI) practices, resource availability, and treatment center performance. Data Collection Interviews and questionnaires provided data from treatment center administrative directors and clinical directors in 2007–2008. Principal Findings Patient-focused TQM/CQI practices fully mediated the relationship between internal management practices and performance. The effects of TQM/CQI on performance are significantly larger for treatment centers with higher levels of staff per patient. Conclusions Internal management practices may create a setting that supports implementation of specific patient-focused practices and protocols inherent to TQM/CQI processes. However, the positive effects of internal management practices on treatment center performance occur through use of specific patient-focused TQM/CPI practices and have more impact when greater amounts of supporting resources are present. PMID:22098342

Financing Freight Improvements

DOT National Transportation Integrated Search

2007-01-01

This Guidebook describes funding and financing tools available for freight investments. The Guidebook has been designed to provide information to the FHWA, states, MPOs, and other parties interested in investing in freight infrastructure. The Guidebo...

Localizer: fast, accurate, open-source, and modular software package for superresolution microscopy

PubMed Central

Duwé, Sam; Neely, Robert K.; Zhang, Jin

2012-01-01

Abstract. We present Localizer, a freely available and open source software package that implements the computational data processing inherent to several types of superresolution fluorescence imaging, such as localization (PALM/STORM/GSDIM) and fluctuation imaging (SOFI/pcSOFI). Localizer delivers high accuracy and performance and comes with a fully featured and easy-to-use graphical user interface but is also designed to be integrated in higher-level analysis environments. Due to its modular design, Localizer can be readily extended with new algorithms as they become available, while maintaining the same interface and performance. We provide front-ends for running Localizer from Igor Pro, Matlab, or as a stand-alone program. We show that Localizer performs favorably when compared with two existing superresolution packages, and to our knowledge is the only freely available implementation of SOFI/pcSOFI microscopy. By dramatically improving the analysis performance and ensuring the easy addition of current and future enhancements, Localizer strongly improves the usability of superresolution imaging in a variety of biomedical studies. PMID:23208219

Proceedings of the 1983 SPC/IREAPS Technical Symposium: Volume 1, Improving Shipbuilding Productivity. Held in Boston, MA on 23-25 August 1983

DTIC Science & Technology

1983-08-25

currently available Westinghouse CAE capabilities include plant layout, piping design, piping analysis , support/hanger design, and drawing preparation. The...considerations involved with the design and analysis of piping and support systems and space management in nuclear power plants are very similar to...piping analysis system can obtain input defini- tion data either from the plant modeling system or from piping drawings (for systems not designed using

Assessment of two e-learning methods teaching undergraduate students cephalometry in orthodontics.

PubMed

Ludwig, B; Bister, D; Schott, T C; Lisson, J A; Hourfar, J

2016-02-01

Cephalometry is important for orthodontic diagnosis and treatment planning and is part of the core curriculum for training dentists. Training involves identifying anatomical landmarks. The aim of this investigation was to assess whether e-learning improves learning efficiency; a programme specifically designed for this purpose was compared to commercially available software. Thirty undergraduate students underwent traditional training of cephalometry consisting of lectures and tutorials. Tracing skills were tested immediately afterwards (T0). The students were then randomly allocated to three groups: 10 students served as control (CF); they were asked to improve their skills using the material provided so far. Ten students were given a program specifically designed for this study that was based on a power point presentation (PPT). The last group was given a commercially available program that included teaching elements (SW). The groups were tested at the end the six week training (T1). The test consisted of tracing 30 points on two radiographs and a point score improvement was calculated. The students were interviewed after the second test. Both e-learning groups improved more than the traditional group. Improvement scores were four for CF; 8.6 for PPT and 2.8 for SW. For PPT all participants improved and the student feedback was the best compared to the other groups. For the other groups some candidates worsened. Blended learning produced better learning outcomes compared to using a traditional teaching method alone. The easy to use Power Point based custom software produced better results than the commercially available software. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Brake System Design Optimization : Volume 2. Supplemental Data.

DOT National Transportation Integrated Search

1981-04-01

Existing freight car braking systems, components, and subsystems are characterized both physically and functionally, and life-cycle costs are examined. Potential improvements to existing systems previously proposed or available are identified and des...

Brake System Design Optimization. Volume II : Supplemental Data.

DOT National Transportation Integrated Search

1981-06-01

Existing freight car braking systems, components, and subsystems are characterized both physically and functionally, and life-cycle costs are examined. Potential improvements to existing systems previously proposed or available are identified and des...

The Virtual Genetics Lab II: Improvements to a Freely Available Software Simulation of Genetics

ERIC Educational Resources Information Center

White, Brian T.

2012-01-01

The Virtual Genetics Lab II (VGLII) is an improved version of the highly successful genetics simulation software, the Virtual Genetics Lab (VGL). The software allows students to use the techniques of genetic analysis to design crosses and interpret data to solve realistic genetics problems involving a hypothetical diploid insect. This is a brief…

Improving Health Care for Assisted Living Residents

ERIC Educational Resources Information Center

Kane, Robert L.; Mach, John R., Jr.

2007-01-01

Purpose: The purpose of this article is to explore how medical care is delivered to older people in assisted living (AL) settings and to suggest ways for improving it. Design and Methods: We present a review of the limited research available on health care for older AL residents and on building testable models of better ways to organize primary…

Protein design on computers. Five new proteins: Shpilka, Grendel, Fingerclasp, Leather, and Aida.

PubMed

Sander, C; Vriend, G; Bazan, F; Horovitz, A; Nakamura, H; Ribas, L; Finkelstein, A V; Lockhart, A; Merkl, R; Perry, L J

1992-02-01

What is the current state of the art in protein design? This question was approached in a recent two-week protein design workshop sponsored by EMBO and held at the EMBL in Heidelberg. The goals were to test available design tools and to explore new design strategies. Five novel proteins were designed: Shpilka, a sandwich of two four-stranded beta-sheets, a scaffold on which to explore variations in loop topology; Grendel, a four-helical membrane anchor, ready for fusion to water-soluble functional domains; Finger-clasp, a dimer of interdigitating beta-beta-alpha units, the simplest variant of the "handshake" structural class; Aida, an antibody binding surface intended to be specific for flavodoxin; Leather--a minimal NAD binding domain, extracted from a larger protein. Each design is available as a set of three-dimensional coordinates, the corresponding amino acid sequence and a set of analytical results. The designs are placed in the public domain for scrutiny, improvement, and possible experimental verification.

Improving Best Air Conditioner Efficiency by 20-30% through a High Efficiency Fan and Diffuser Stage Coupled with an Evaporative Condenser Pre-Cooler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, Danny S; Sherwin, John R; Raustad, Richard

2014-04-10

The Florida Solar Energy Center (FSEC) conducted a research project to improve the best residential air conditioner condenser technology currently available on the market by retrofitting a commercially-available unit with both a high efficiency fan system and an evaporative pre-cooler. The objective was to integrate these two concepts to achieve an ultra-efficient residential air conditioner design. The project produced a working prototype that was 30% more efficient compared to the best currently-available technologies; the peak the energy efficiency ratio (EER) was improved by 41%. Efficiency at the Air-Conditioning and Refrigeration Institute (ARI) standard B-condition which is used to estimate seasonalmore » energy efficiency ratio (SEER), was raised from a nominal 21 Btu/Wh to 32 Btu/Wh.« less

Differences in orthotic design for thumb osteoarthritis and its impact on functional outcomes: A scoping review.

PubMed

de Almeida, Pedro Henrique Tq; MacDermid, Joy; Pontes, Tatiana Barcelos; Dos Santos-Couto-Paz, Clarissa Cardoso; Matheus, João Paulo Chieregato

2017-08-01

Orthoses are a well-known intervention for the treatment of thumb osteoarthritis; however, there is a multitude of orthotic designs and not enough evidence to support the efficacy of specific models. To examine the influence of different orthoses on pain, hand strength, and hand function of patients with thumb osteoarthritis. Literature review. A scoping literature review of 14 publications reporting orthotic interventions for patients with thumb osteoarthritis was conducted. Functional outcomes and measures were extracted and analyzed. In total, 12 studies reported improvements in pain and hand strength after the use of thumb orthoses. Comparisons between different orthotic designs were inconclusive. The use of orthoses can decrease pain and improve hand function of patients with thumb osteoarthritis; however, the effectiveness of different orthoses still needs support through adequate evidence. Clinical relevance Multiple orthoses for thumb osteoarthritis are available. Although current studies support their use to improve pain and hand function, there is no evidence to support the efficacy of specific orthotic designs. Improved functional outcomes can be achieved through the use of short orthoses, providing thumb stabilization without immobilizing adjacent joints.

Interdisciplinary and multilevel optimum design

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw; Haftka, Raphael T.

1986-01-01

Interactions among engineering disciplines and subsystems in engineering system design are surveyed and specific instances of such interactions are described. Examination of the interactions that a traditional design process in which the numerical values of major design variables are decided consecutively is likely to lead to a suboptimal design. Supporting numerical examples are a glider and a space antenna. Under an alternative approach introduced, the design and its sensitivity data from the subsystems and disciplines are generated concurrently and then made available to the system designer enabling him to modify the system design so as to improve its performance. Examples of a framework structure and an airliner wing illustrate that approach.

Chiller Controls-related Energy Saving Opportunities in FederalFacilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Tom

2003-01-01

Chillers are a significant component of large facility energy use. The focus of much of the development of chilled water systems in recent years has been on optimization of set point and staging controls, improvements in chiller design to increase efficiency and accommodate chlorofluorocarbon (CFC) refrigerant replacements. Other improvements have been made by upgrading controls to the latest digital technologies, improving access and monitoring via communications and sophisticated liquid crystal displays (LCD), more robust fault diagnostics and operating and maintenance information logging. Advances have also been made in how chiller plant systems are designed and operated, and in the diversitymore » of chiller products that are available to support innovative approaches. As in many industries, these improvements have been facilitated by advances in, and lower costs for, enabling technologies, such as refrigerants, compressor design, electronics for controls and variable frequency drives (VFD). Along with the improvements in electronics one would expect that advances have also been made in the functionality of unit controls included with chillers. Originally, the primary purpose of this project was to investigate the state of practice of chiller unit controllers in terms of their energy saving capabilities. However, early in the study it was discovered that advances in this area did not include incorporation of significantly different capabilities than had existed 10-15 years ago. Thus the scope has been modified to provide an overview of some of the basic controls-related energy saving strategies that are currently available along with guideline estimates of their potential and applicability. We have minimized consideration of strategies that could be primarily implemented via design practices such as chiller selection and plant design, and those that can only be implemented by a building management system (BMS). Also, since most of the floor space of federal buildings occurs in large buildings, we have focused on water-cooled screw and centrifugal chillers of 100 ton capacity and greater. However, the role of reciprocating and gas chillers (absorption and engine driven) is discussed briefly. Understanding the demographics of chiller deployment in the federal sector, state of practice of energy savings strategies and control features availability will help federal energy managers and program implementers to make informed decisions in support of energy saving performance contracting (ESPC) and other programs.« less

Brake System Design Optimization : Volume 1. A Survey and Assessment.

DOT National Transportation Integrated Search

1978-06-01

Existing freight car braking systems, components, and subsystems are characterized both physically and functionally, and life-cycle costs are examined. Potential improvements to existing systems previously proposed or available are identified and des...

44 CFR 64.5 - Relationship of rates to zone designations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the entire community at chargeable rates (i.e., subsidized) for first layer coverage of existing... improvements. Upon the effective date of a FIRM, second layer coverage is available only at risk premium rates...

Investigation of sediment suspension technology.

DOT National Transportation Integrated Search

2016-10-01

The goal of the project was to critically review existing literature to access currently available devices, the : identification of areas of improvement for future designs, and the outline of a new-generation cohesive sediment : erosion measuring dev...

Ultra low power CMOS technology

NASA Technical Reports Server (NTRS)

Burr, J.; Peterson, A.

1991-01-01

This paper discusses the motivation, opportunities, and problems associated with implementing digital logic at very low voltages, including the challenge of making use of the available real estate in 3D multichip modules, energy requirements of very large neural networks, energy optimization metrics and their impact on system design, modeling problems, circuit design constraints, possible fabrication process modifications to improve performance, and barriers to practical implementation.

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: Sikorsky Aircraft: Advances toward interacting with the airframe design process

NASA Technical Reports Server (NTRS)

Twomey, William J.

1993-01-01

A short history is traced of the work done at Sikorsky Aircraft under the NASA/industry DAMVIBS program. This includes both work directly funded by the program as well as work which was internally funded but which received its initial impetus from DAMVIBS. The development of a finite element model of the UH-60A airframe having a marked improvement in vibration-predicting ability is described. A new program, PAREDYM, developed at Sikorsky, which automatically adjusts an FEM so that its modal characteristics match test values, is described, as well as the part this program played in the improvement of the UH-60A model. Effects of the bungee suspension system on the shake test data used for model verification are described. The impetus given by the modeling improvement, as well as the recent availability of PAREDYM, has brought for the first time the introduction of low-vibration design into the design cycle at Sikorsky.

Investigation of improved designs for rotational micromirrors using multiuser MEMS processes

NASA Astrophysics Data System (ADS)

Lin, Julianna E.; Michael, Feras S. J.; Kirk, Andrew G.

2001-04-01

In recent years, the design of rotational micromirrors for use in optical cross connects has received much attention. Although several companies have already produced and marketed a number of torsional mirror devices, more work is still needed to determine how these mirrors can be integrated into optical systems to form compact optical switches. However, recently several commercial MEMS foundry services have become available. Thus, due to the low cost of these prototyping services, new devices can be fabricated in short amounts of time and the designs adapted to meet the needs of different applications. The purpose of this work is to investigate the fabrication of new micromirror designs using the Multi-User MEMS Processes (MUMPs) foundry service available from Cronos Integrated Microsystems, located in North Carolina, USA). Several sets of mirror designs were submitted for fabrication and the resulting structures characterized using a phase-shifting Mirau interferometer. The results of these devices are presented.

Review and critical analysis: Rolling-element bearings for system life and reliability

NASA Technical Reports Server (NTRS)

Irwin, A. S.; Anderson, W. J.; Derner, W. J.

1985-01-01

A ball and cylindrical roller bearing technical specification which incorporates the latest state-of-the-art advancements was prepared for the purpose of improving bearing reliability in U.S. Army aircraft. The current U.S. Army aviation bearing designs and applications, including life analyses, were analyzed. A bearing restoration and refurbishment specification was prepared to improve bearing availability.

A Case Study of Culturally Relevant School-Based Programming for First Nations Youth: Improved Relationships, Confidence and Leadership, and School Success

ERIC Educational Resources Information Center

Crooks, Claire V.; Burleigh, Dawn; Snowshoe, Angela; Lapp, Andrea; Hughes, Ray; Sisco, Ashley

2015-01-01

Schools are expected to promote social and emotional learning skills among youth; however, there is a lack of culturally-relevant programming available. The Fourth R: Uniting Our Nations programs for Aboriginal youth include strengths-based programs designed to promote healthy relationships and cultural connectedness, and improve school success…

Evaluation of a campaign to improve immunization in a rural headstart program.

PubMed

Mayer, J P; Housemann, R; Piepenbrok, B

1999-02-01

This study evaluated an intervention to improve immunization rates in a high poverty, medically underserved rural area employing a pretest-posttest design. The intervention expanded immunization availability, established walk-in appointment policies, and introduced intensified parent education. Formative evaluation indicated specific messages with high salience to parents. As a result, the susceptibility and severity of childhood infectious disease, the outcome efficacy of vaccines, and methods to reduce barriers to immunization were emphasized in communications with parents. Data on DTP1-4, OPV1-3, and MMR were obtained from preschools, local health departments and private medical practices before (n = 567) and after the intervention (n = 331). Following adjustment for birth order and demographics, at post-intervention a significantly greater proportion of children received 6 of 8 vaccines on time. Effect sizes were large. For example, post MMR rates were at least 2X greater than pre rates. Time-series analysis of trend data on local newspaper coverage of child health topics suggested history was not a major threat to the internal validity of this pre-post only design. The findings indicate that comprehensive intervention, targeting improvements in the availability of pediatric care, health system policies and parent behavior, can improve immunization.

Crafting biochars to reduce N2O and CO2 emissions while also improving soil quality

NASA Astrophysics Data System (ADS)

Novak, Jeff; Ippolito, Jim; Spokas, Kurt; Sigua, Gilbert; Kammann, Claudia; Wrage-Monnig, Nicole; Borchard, Nils; Schirrmann, Michael; Estavillo, Jose Maria; Fuertes-Mendizabal, Teresa; Menendez, Sergio; Cayuela, Maria Luz

2017-04-01

Biochar used as an amendment has been linked to nitrous oxide (N2O) emission reductions, a decrease in nitrogen (N) leaching, and soil quality improvements (e.g., soil carbon sequestration, pH, etc.). While numerous articles will support these three facts, conversely, there are reports of no to marginal influences. One reason for the mixed biochar performance could be related to applying biochar with incorrect chemical and physical characteristics. As a means to increase biochar efficiency, we introduced the concept of crafting biochars with properties attuned to specific soil deficiencies. Implementing this concept requires a literature review to identify salient biochar characteristics that reduces N2O emissions, impacts N availability, while also improving soil quality. Thus, scientists from the USDA-ARS and through a coalition of European scientists under the FACCE-JPI umbrella have conceived the DesignChar4food (d4f) project. In this project, scientists are working collaboratively to further this concept to match the appropriate biochar for selective soil quality improvement, retain N for crops, and promote greenhouse gas reductions. This presentation will highlight results from the d4f team compromising a meta-analysis of articles on biochar:N2O dynamics, N availability, and how designer biochars can target specific soil quality improvements.

Re-designing the Mozambique vaccine supply chain to improve access to vaccines.

PubMed

Lee, Bruce Y; Haidari, Leila A; Prosser, Wendy; Connor, Diana L; Bechtel, Ruth; Dipuve, Amelia; Kassim, Hidayat; Khanlawia, Balbina; Brown, Shawn T

2016-09-22

Populations and routine childhood vaccine regimens have changed substantially since supply chains were designed in the 1980s, and introducing new vaccines during the "Decade of Vaccine" may exacerbate existing bottlenecks, further inhibiting the flow of all vaccines. Working with the Mozambique Ministry of Health, our team implemented a new process that integrated HERMES computational simulation modeling and on-the-ground implementers to evaluate and improve the Mozambique vaccine supply chain using a system-re-design that integrated new supply chain structures, information technology, equipment, personnel, and policies. The alternative system design raised vaccine availability (from 66% to 93% in Gaza; from 76% to 84% in Cabo Delgado) and reduced the logistics cost per dose administered (from $0.53 to $0.32 in Gaza; from $0.38 to $0.24 in Cabo Delgado) as compared to the multi-tiered system under the current EPI. The alternative system also produced higher availability at lower costs after new vaccine introductions. Since reviewing scenarios modeling deliveries every two months in the north of Gaza, the provincial directorate has decided to pilot this approach diverging from decades of policies dictating monthly deliveries. Re-design improved not only supply chain efficacy but also efficiency, important since resources to deliver vaccines are limited. The Mozambique experience and process can serve as a model for other countries during the Decade of Vaccines. For the Decade of Vaccines, getting vaccines at affordable prices to the market is not enough. Vaccines must reach the population to be successful. Copyright © 2016. Published by Elsevier Ltd.

Re-designing the Mozambique vaccine supply chain to improve access to vaccines

PubMed Central

Lee, Bruce Y.; Haidari, Leila A.; Prosser, Wendy; Connor, Diana L.; Bechtel, Ruth; Dipuve, Amelia; Kassim, Hidayat; Khanlawia, Balbina; Brown, Shawn T.

2017-01-01

Introduction Populations and routine childhood vaccine regimens have changed substantially since supply chains were designed in the 1980s, and introducing new vaccines during the “Decade of Vaccine” may exacerbate existing bottlenecks, further inhibiting the flow of all vaccines. Methods Working with the Mozambique Ministry of Health, our team implemented a new process that integrated HERMES computational simulation modeling and on-the-ground implementers to evaluate and improve the Mozambique vaccine supply chain using a system-re-design that integrated new supply chain structures, information technology, equipment, personnel, and policies. Results The alternative system design raised vaccine availability (from 66% to 93% in Gaza; from 76% to 84% in Cabo Delgado) and reduced the logistics cost per dose administered (from $0.53 to $0.32 in Gaza; from $0.38 to $0.24 in Cabo Delgado) as compared to the multi-tiered system under the current EPI. The alternative system also produced higher availability at lower costs after new vaccine introductions. Since reviewing scenarios modeling deliveries every two months in the north of Gaza, the provincial directorate has decided to pilot this approach diverging from decades of policies dictating monthly deliveries. Discussion Re-design improved not only supply chain efficacy but also efficiency, important since resources to deliver vaccines are limited. The Mozambique experience and process can serve as a model for other countries during the Decade of Vaccines. For the Decade of Vaccines, getting vaccines at affordable prices to the market is not enough. Vaccines must reach the population to be successful. PMID:27576077

Improving the Acoustical Performance of Porous Asphalt Pavements

DOT National Transportation Integrated Search

1999-09-01

Selection of pavement for noise reduction considerations is becoming a major concern for those involved in highway construction within densely populated areas. However, the pavements available are designed for durability and safety reasons and not fo...

Preliminary Results on Luminaire Designs for Hybrid Solar Lighting Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Earl, D.D.

2001-06-15

We report on the design of two hybrid lighting luminaires that blend light from a fiber optic end-emitted solar source with electric T8 fluorescent lamps. Both designs involve the retrofit of a commercially-available recessed fluorescent luminaire with minimal reductions in the original luminaire's optical efficiency. Two methods for high-angle dispersion of fiber optic end-emitted solar light are described and the resulting spatial intensity distributions, simulated using ZEMAX, are compared with standard cylindrical fluorescent tubes. Differences in spatial intensity distribution are qualitatively characterized and potential design improvements discussed.

Improved turbine disk design to increase reliability of aircraft jet engines

NASA Technical Reports Server (NTRS)

Alver, A. S.; Wong, J. K.

1975-01-01

An analytical study was conducted on a bore entry cooled turbine disk for the first stage of the JT8D-17 high pressure turbine which had the potential to improve disk life over existing design. The disk analysis included the consideration of transient and steady state temperature, blade loading, creep, low cycle fatigue, fracture mechanics and manufacturing flaws. The improvement in life of the bore entry cooled turbine disk was determined by comparing it with the existing disk made of both conventional and advanced (Astroloy) disk materials. The improvement in crack initiation life of the Astroloy bore entry cooled disk is 87% and 67% over the existing disk made of Waspaloy and Astroloy, respectively. Improvement in crack propagation life is 124% over the Waspaloy and 465% over the Astroloy disks. The available kinetic energies of disk fragments calculated for the three disks indicate a lower fragment energy level for the bore entry cooled turbine disk.

Designing for Reliability and Robustness

NASA Technical Reports Server (NTRS)

Svetlik, Randall G.; Moore, Cherice; Williams, Antony

2017-01-01

Long duration spaceflight has a negative effect on the human body, and exercise countermeasures are used on-board the International Space Station (ISS) to minimize bone and muscle loss, combatting these effects. Given the importance of these hardware systems to the health of the crew, this equipment must continue to be readily available. Designing spaceflight exercise hardware to meet high reliability and availability standards has proven to be challenging throughout the time the crewmembers have been living on ISS beginning in 2000. Furthermore, restoring operational capability after a failure is clearly time-critical, but can be problematic given the challenges of troubleshooting the problem from 220 miles away. Several best-practices have been leveraged in seeking to maximize availability of these exercise systems, including designing for robustness, implementing diagnostic instrumentation, relying on user feedback, and providing ample maintenance and sparing. These factors have enhanced the reliability of hardware systems, and therefore have contributed to keeping the crewmembers healthy upon return to Earth. This paper will review the failure history for three spaceflight exercise countermeasure systems identifying lessons learned that can help improve future systems. Specifically, the Treadmill with Vibration Isolation and Stabilization System (TVIS), Cycle Ergometer with Vibration Isolation and Stabilization System (CEVIS), and the Advanced Resistive Exercise Device (ARED) will be reviewed, analyzed, and conclusions identified so as to provide guidance for improving future exercise hardware designs. These lessons learned, paired with thorough testing, offer a path towards reduced system down-time.

Failure: A Source of Progress in Maintenance and Design

NASA Astrophysics Data System (ADS)

Chaïb, R.; Taleb, M.; Benidir, M.; Verzea, I.; Bellaouar, A.

This approach, allows using the failure as a source of progress in maintenance and design to detect the most critical components in equipment, to determine the priority order maintenance actions to lead and direct the exploitation procedure towards the most penalizing links in this equipment, even define the necessary changes and recommendations for future improvement. Thus, appreciate the pathological behaviour of the material and increase its availability, even increase its lifespan and improve its future design. In this context and in the light of these points, the failures are important in managing the maintenance function. Indeed, it has become important to understand the phenomena of failure and degradation of equipments in order to establish an appropriate maintenance policy for the rational use of mechanical components and move to the practice of proactive maintenance [1], do maintenance at the design [2].

Interdisciplinary and multilevel optimum design. [in aerospace structural engineering

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw; Haftka, Raphael T.

1987-01-01

Interactions among engineering disciplines and subsystems in engineering system design are surveyed and specific instances of such interactions are described. Examination of the interactions that a traditional design process in which the numerical values of major design variables are decided consecutively is likely to lead to a suboptimal design. Supporting numerical examples are a glider and a space antenna. Under an alternative approach introduced, the design and its sensitivity data from the subsystems and disciplines are generated concurrently and then made available to the system designer enabling him to modify the system design so as to improve its performance. Examples of a framework structure and an airliner wing illustrate that approach.

The impact of rare earth cobalt permanent magnets on electromechanical device design

NASA Technical Reports Server (NTRS)

Fisher, R. L.; Studer, P. A.

1979-01-01

Specific motor designs which employ rare earth cobalt magnets are discussed with special emphasis on their unique properties and magnetic field geometry. In addition to performance improvements and power savings, high reliability devices are attainable. Both the mechanism and systems engineering should be aware of the new performance levels which are currently becoming available as a result of the rare earth cobalt magnets.

How to study improvement interventions: a brief overview of possible study types

PubMed Central

Portela, Margareth Crisóstomo; Pronovost, Peter J; Woodcock, Thomas; Carter, Pam; Dixon-Woods, Mary

2015-01-01

Improvement (defined broadly as purposive efforts to secure positive change) has become an increasingly important activity and field of inquiry within healthcare. This article offers an overview of possible methods for the study of improvement interventions. The choice of available designs is wide, but debates continue about how far improvement efforts can be simultaneously practical (aimed at producing change) and scientific (aimed at producing new knowledge), and whether the distinction between the practical and the scientific is a real and useful one. Quality improvement projects tend to be applied and, in some senses, self-evaluating. They are not necessarily directed at generating new knowledge, but reports of such projects if well conducted and cautious in their inferences may be of considerable value. They can be distinguished heuristically from research studies, which are motivated by and set out explicitly to test a hypothesis, or otherwise generate new knowledge, and from formal evaluations of improvement projects. We discuss variants of trial designs, quasi-experimental designs, systematic reviews, programme evaluations, process evaluations, qualitative studies, and economic evaluations. We note that designs that are better suited to the evaluation of clearly defined and static interventions may be adopted without giving sufficient attention to the challenges associated with the dynamic nature of improvement interventions and their interactions with contextual factors. Reconciling pragmatism and research rigour is highly desirable in the study of improvement. Trade-offs need to be made wisely, taking into account the objectives involved and inferences to be made. PMID:25810415

Republished: How to study improvement interventions: a brief overview of possible study types

PubMed Central

Portela, Margareth Crisóstomo; Pronovost, Peter J; Woodcock, Thomas; Carter, Pam; Dixon-Woods, Mary

2015-01-01

Improvement (defined broadly as purposive efforts to secure positive change) has become an increasingly important activity and field of inquiry within healthcare. This article offers an overview of possible methods for the study of improvement interventions. The choice of available designs is wide, but debates continue about how far improvement efforts can be simultaneously practical (aimed at producing change) and scientific (aimed at producing new knowledge), and whether the distinction between the practical and the scientific is a real and useful one. Quality improvement projects tend to be applied and, in some senses, self-evaluating. They are not necessarily directed at generating new knowledge, but reports of such projects if well conducted and cautious in their inferences may be of considerable value. They can be distinguished heuristically from research studies, which are motivated by and set out explicitly to test a hypothesis, or otherwise generate new knowledge, and from formal evaluations of improvement projects. We discuss variants of trial designs, quasi-experimental designs, systematic reviews, programme evaluations, process evaluations, qualitative studies, and economic evaluations. We note that designs that are better suited to the evaluation of clearly defined and static interventions may be adopted without giving sufficient attention to the challenges associated with the dynamic nature of improvement interventions and their interactions with contextual factors. Reconciling pragmatism and research rigour is highly desirable in the study of improvement. Trade-offs need to be made wisely, taking into account the objectives involved and inferences to be made. PMID:26045562

Inter-species prediction of protein phosphorylation in the sbv IMPROVER species translation challenge

PubMed Central

Biehl, Michael; Sadowski, Peter; Bhanot, Gyan; Bilal, Erhan; Dayarian, Adel; Meyer, Pablo; Norel, Raquel; Rhrissorrakrai, Kahn; Zeller, Michael D.; Hormoz, Sahand

2015-01-01

Motivation: Animal models are widely used in biomedical research for reasons ranging from practical to ethical. An important issue is whether rodent models are predictive of human biology. This has been addressed recently in the framework of a series of challenges designed by the systems biology verification for Industrial Methodology for Process Verification in Research (sbv IMPROVER) initiative. In particular, one of the sub-challenges was devoted to the prediction of protein phosphorylation responses in human bronchial epithelial cells, exposed to a number of different chemical stimuli, given the responses in rat bronchial epithelial cells. Participating teams were asked to make inter-species predictions on the basis of available training examples, comprising transcriptomics and phosphoproteomics data. Results: Here, the two best performing teams present their data-driven approaches and computational methods. In addition, post hoc analyses of the datasets and challenge results were performed by the participants and challenge organizers. The challenge outcome indicates that successful prediction of protein phosphorylation status in human based on rat phosphorylation levels is feasible. However, within the limitations of the computational tools used, the inclusion of gene expression data does not improve the prediction quality. The post hoc analysis of time-specific measurements sheds light on the signaling pathways in both species. Availability and implementation: A detailed description of the dataset, challenge design and outcome is available at www.sbvimprover.com. The code used by team IGB is provided under http://github.com/uci-igb/improver2013. Implementations of the algorithms applied by team AMG are available at http://bhanot.biomaps.rutgers.edu/wiki/AMG-sc2-code.zip. Contact: meikelbiehl@gmail.com PMID:24994890

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

1993-01-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

Innovative Design to Prevent Reversal of Roller Blood Pump Rotation in the Event of Electromechanical Failure: An Easy Solution to a Devastating Problem

PubMed Central

Skoletsky, Jennifer S.; White, Brian T.; Austin, Jon W.

2007-01-01

Abstract: Despite the advanced technologies of battery back-up for heart-lung consoles and the availability of system-wide generators, electromechanical failure is still occurring. Several heartlung machine manufacturers still provide unsafe handcranking devices to use in the case of an emergency while using a roller blood pump. A new design has been engineered to eliminate safety and quality issues for the perfusionist and the patient when the need for handcranking presents itself. A ratchet-style handcranking device was fabricated by means of a steel plate with adjustable pins. The adjustable pins allow for use with different models of the Cobe, Stockert, and Jostra heart-lung consoles, which contain roller pumps with 180° roller heads. Additional modifications such as a 1:2 transmission and fluorescent markers are also used in the design. This innovative design is an improvement in safety compared with the current handcrank provided by Cobe, Stockert, and Jostra. With this modified handcranking device, accidental reverse rotation of the roller pump head cannot occur. Fluorescent markers will improve visualization of the pump head in low-light situations. The ergonomic design improves efficiency by reducing fatigue. Most importantly, a “safe” safety device will replace the current design provided by these manufacturers, thus improving the quality of care by health care providers. PMID:17672191

A framework for reporting on human factor/usability studies of health information technologies.

PubMed

Peute, Linda W; Driest, Keiko F; Marcilly, Romaric; Bras Da Costa, Sabrina; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W M

2013-01-01

Increasingly, studies are being published on the potential negative effect of introducing poor designed Health Information Technology (HIT) into clinical settings, relating to technology-induced errors and adverse events. Academic research on HIT design and evaluation is an extremely important source of information in providing new insights into factors contributing to successful system (re)design efforts, system user-friendliness and usability issues and safety critical aspects of HIT design. However, these studies have been inconsistent and incomprehensive in their reporting, complicating the appraisal of outcomes, generalizability of study findings, meta-analysis and harmonization of the available evidence. To improve identification of type of use errors and safety related issues regarding design and implementation of HIT, consensus on issues to be reported on in scientific publications is a necessary step forward. This study presents the first approach to a framework providing a set of principles to follow for comprehensive and unambiguous reporting of HIT design and usability evaluation studies with the objective to reduce variation, improve on the publication reporting quality and proper indexation of these studies. This framework may be helpful in expanding the knowledge base not only concerning the application of Human Factors (HF)/Usability studies of HIT but also improve the knowledge base of how to (re)design and implement effective, efficient and safe HIT.

The Participative Design of an Endoscopy Facility using Lean 3P

PubMed Central

Smith, Iain

2016-01-01

In the UK, bowel cancer is the second largest cancer killer. Diagnosing people earlier can save lives but demand for endoscopies is increasing and this can put pressure on waiting times. To address this challenge, an endoscopy unit in North East England decided to improve their facilities to increase capacity and create environments that improve the experience of users. This presented a significant opportunity for step change improvement but also a problem in terms of creating designs that meet user requirements whilst addressing structural or space constraints. The Lean design process known as ‘3P' (standing for the production preparation process) was utilised as a participative design strategy to engage stakeholders in the design of the new department. This involved a time-out workshop (or 3P event) in which Lean and participative design tools were utilised to create an innovative design based on ‘point of delivery' (POD) principles. The team created a design that demonstrated an increase in treatment room capacity by 25% and bed capacity by 70% whilst reducing travel distance for patients by 25.8% and staff by 27.1%. This was achieved with an increase in available space of only 13%. The Lean 3P method provided a structured approach for corporate and clinical staff to work together with patient representatives as cross-functional teams. This participative approach facilitated communication and learning between stakeholders about care processes and personal preferences. Lean 3P therefore appears to be a promising approach to improving the healthcare facilities design process to meet user requirements. PMID:27493744

Realizing universal health coverage for maternal health services in the Republic of Guinea: the use of workforce projections to design health labor market interventions.

PubMed

Jansen, Christel; Codjia, Laurence; Cometto, Giorgio; Yansané, Mohamed Lamine; Dieleman, Marjolein

2014-01-01

Universal health coverage requires a health workforce that is available, accessible, and well-performing. This article presents a critical analysis of the health workforce needs for the delivery of maternal and neonatal health services in Guinea, and of feasible and relevant interventions to improve the availability, accessibility, and performance of the health workforce in the country. A needs-based approach was used to project human resources for health (HRH) requirements. This was combined with modeling of future health sector demand and supply. A baseline scenario with disaggregated need and supply data for the targeted health professionals per region and setting (urban or rural) informed the identification of challenges related to the availability and distribution of the workforce between 2014 and 2024. Subsequently, the health labor market framework was used to identify interventions to improve the availability and distribution of the health workforce. These interventions were included in the supply side modeling, in order to create a "policy rich" scenario B which allowed for analysis of their potential impact. In the Republic of Guinea, only 44% of the nurses and 18% of the midwives required for maternal and neonatal health services are currently available. If Guinea continues on its current path without scaling up recruitment efforts, the total stock of HRH employed by the public sector will decline by 15% between 2014 and 2024, while HRH needs will grow by 22% due to demographic trends. The high density of HRH in urban areas and the high number of auxiliary nurses who are currently employed pose an opportunity for improving the availability, accessibility, and performance of the health workforce for maternal and neonatal health in Guinea, especially in rural areas. Guinea will need to scale up its recruitment efforts in order to improve health workforce availability. Targeted labor market interventions need to be planned and executed over several decades to correct entrenched distortions and mismatches between workforce need, supply, and demand. The case of Guinea illustrates how to design and operationalize HRH interventions based on workforce projections to accompany and facilitate universal health coverage reforms.

Realizing universal health coverage for maternal health services in the Republic of Guinea: the use of workforce projections to design health labor market interventions

PubMed Central

Jansen, Christel; Codjia, Laurence; Cometto, Giorgio; Yansané, Mohamed Lamine; Dieleman, Marjolein

2014-01-01

Background Universal health coverage requires a health workforce that is available, accessible, and well-performing. This article presents a critical analysis of the health workforce needs for the delivery of maternal and neonatal health services in Guinea, and of feasible and relevant interventions to improve the availability, accessibility, and performance of the health workforce in the country. Methods A needs-based approach was used to project human resources for health (HRH) requirements. This was combined with modeling of future health sector demand and supply. A baseline scenario with disaggregated need and supply data for the targeted health professionals per region and setting (urban or rural) informed the identification of challenges related to the availability and distribution of the workforce between 2014 and 2024. Subsequently, the health labor market framework was used to identify interventions to improve the availability and distribution of the health workforce. These interventions were included in the supply side modeling, in order to create a “policy rich” scenario B which allowed for analysis of their potential impact. Results In the Republic of Guinea, only 44% of the nurses and 18% of the midwives required for maternal and neonatal health services are currently available. If Guinea continues on its current path without scaling up recruitment efforts, the total stock of HRH employed by the public sector will decline by 15% between 2014 and 2024, while HRH needs will grow by 22% due to demographic trends. The high density of HRH in urban areas and the high number of auxiliary nurses who are currently employed pose an opportunity for improving the availability, accessibility, and performance of the health workforce for maternal and neonatal health in Guinea, especially in rural areas. Conclusion Guinea will need to scale up its recruitment efforts in order to improve health workforce availability. Targeted labor market interventions need to be planned and executed over several decades to correct entrenched distortions and mismatches between workforce need, supply, and demand. The case of Guinea illustrates how to design and operationalize HRH interventions based on workforce projections to accompany and facilitate universal health coverage reforms. PMID:25429245

Improved Design of Tunnel Supports : Volume 4 : Tunneling Practices in Austria and Germany

DOT National Transportation Integrated Search

1980-06-01

Volume 4 documents and evaluates extensive information gathered on tunnel construction practices in Austria and Germany, identifies differences compared to U.S. practices, and describes new developments. The objective was to assemble all available in...

BWR Servicing and Refueling Improvement Program: Phase I summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, D.R.

1978-09-01

Under the U.S. Department of Energy sponsorship, General Electric Co. (GE) undertook a study of boiling water reactor (BWR) refueling outages for the purpose of recommending the development and demonstration of critical path time savings improvements. The Tennessee Valley Authority (TVA) joined the study as a subcontractor, providing monitoring assistance and making the Browns Ferry Site available for improvement demonstrations. Agreement was also reached with Georgia Power Co., Power Authority of the State of New York, and Commonwealth Edison Co. for monitoring and data collection at Hatch 1, FitzPatrick, and Quad Cities 1 nuclear plants, respectively. The objective was tomore » identify, develop, and demonstrate improved refueling, maintenance, and inspection procedures and equipment. The improvements recommended in this study are applicable to BWR nuclear plants currently in operation as well as those in the design and construction phases. The recommendations and outage information can be used as a basis to plan and conduct the first outages of new plants and to improve the planning and facilities of currently operating plants. Many of the recommendations can readily be incorporated in plants currently in the design and construction phases as well as in the design of future plants. Many of these recommended improvements can be implemented immediately by utilities without further technical development.« less

High efficiency solar cell processing

NASA Technical Reports Server (NTRS)

Ho, F.; Iles, P. A.

1985-01-01

At the time of writing, cells made by several groups are approaching 19% efficiency. General aspects of the processing required for such cells are discussed. Most processing used for high efficiency cells is derived from space-cell or concentrator cell technology, and recent advances have been obtained from improved techniques rather than from better understanding of the limiting mechanisms. Theory and modeling are fairly well developed, and adequate to guide further asymptotic increases in performance of near conventional cells. There are several competitive cell designs with promise of higher performance ( 20%) but for these designs further improvements are required. The available cell processing technology to fabricate high efficiency cells is examined.

Space crew radiation exposure analysis system based on a commercial stand-alone CAD system

NASA Technical Reports Server (NTRS)

Appleby, Matthew H.; Golightly, Michael J.; Hardy, Alva C.

1992-01-01

Major improvements have recently been completed in the approach to spacecraft shielding analysis. A Computer-Aided Design (CAD)-based system has been developed for determining the shielding provided to any point within or external to the spacecraft. Shielding analysis is performed using a commercially available stand-alone CAD system and a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design projects such as a Mars transfer habitat, pressurized lunar rover, and the redesigned Space Station. Results of these analyses are provided to demonstrate the applicability and versatility of the system.

Using History to Teach Invention and Design: The Case of the Telephone

NASA Astrophysics Data System (ADS)

Gorman, Michael E.; Robinson, J. Kirby

This paper shows how a historical case, the invention of the telephone, can be used to teach invention and design in a way that combines engineering, social sciences, and humanities. The historical problem of transmitting speech was turned into an active learning module, in which students sought to improve patents obtained by early telephone inventors like Alexander Graham Bell and Elisha Gray, using equipment similar to what was available at the time. The result was a collaborative learning environment in which students from a wide range of majors worked in teams, eventually producing a patent application. As part of the project, they were allowed to search historical materials like the Bell notebooks, which were made available on line. This experience gave them a better understanding of the invention and design process.

Zero Energy Schools: Designing for the Future: Zero Energy Ready K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torcellini, Paul A

Designing, building, and operating zero energy ready K-12 schools provides benefits for districts, students, and teachers. Optimizing energy efficiency is important in any building, but it's particularly important in K-12 schools. Many U.S. school districts struggle for funding, and improving a school building's energy efficiency can free up operational funds that may then be available for educational and other purposes.

Operational Considerations and Comparisons of the Saturn, Space Shuttle and Ares Launch Vehicles

NASA Technical Reports Server (NTRS)

Cruzen, Craig; Chavers, Greg; Wittenstein, Jerry

2009-01-01

The United States (U.S.) space exploration policy has directed the National Aeronautics and Space Administration (NASA) to retire the Space Shuttle and to replace it with a new generation of space transportation systems for crew and cargo travel to the International Space Station, the Moon, Mars, and beyond. As part of the Constellation Program, engineers at NASA's Marshall Space Flight Center in Huntsville, Alabama are working to design and build the Ares I, the first of two large launch vehicles to return humans to the Moon. A deliberate effort is being made to ensure a high level of operability in order to significantly increase safety and availability as well as reduce recurring costs of this new launch vehicle. It is the Ares Project's goal to instill operability as part of the requirements development, design and operations of the vehicle. This paper will identify important factors in launch vehicle design that affect the operability and availability of the system. Similarities and differences in operational constraints will also be compared between the Saturn V, Space Shuttle and current Ares I design. Finally, potential improvements in operations and operability for large launch vehicles will be addressed. From the examples presented, the paper will discuss potential improvements for operability for future launch vehicles.

Engaging Teens with Asthma in Designing a Patient-Centered Mobile App to Aid Disease Self-Management.

PubMed

Schneider, Tali; Panzera, Anthony D; Couluris, Marisa; Lindenberger, James; McDermott, Robert; Bryant, Carol A

2015-08-10

Despite the growing market of e-health disease self-management tools, few studies have reported the presence of teen patients in all phases of product design. While rates of American teens using mobile Internet grow, an opportunity to deliver disease self-management targeted for teen patients exists. Building on findings from previous investigations with teens with asthma, we explored teens' insights on the development of a patient-centered asthma management application (app). Two existing asthma apps were used by 16 teen asthmatics for 7-10 days. At the end of the trial period, in-depth interviews were conducted with each participant to gather insights about the user experience. Participants requested more asthma-related content that educates them about their condition. Suggested improvements to currently available apps included a longer list of selectable symptoms to track, medication tracking, and more compelling interface features. Participants showed interest in using apps for managing their asthma, yet recommended improvements on current design. Whereas national figures point to a more ubiquitous mobile device environment, implementation efforts must respond to participants' recommendations while minding lingering digital divides. Currently available apps lack appealing components that teens seek or desire. Subsequent development should include teens' participation in component design insights.

Research on high availability architecture of SQL and NoSQL

NASA Astrophysics Data System (ADS)

Wang, Zhiguo; Wei, Zhiqiang; Liu, Hao

2017-03-01

With the advent of the era of big data, amount and importance of data have increased dramatically. SQL database develops in performance and scalability, but more and more companies tend to use NoSQL database as their databases, because NoSQL database has simpler data model and stronger extension capacity than SQL database. Almost all database designers including SQL database and NoSQL database aim to improve performance and ensure availability by reasonable architecture which can reduce the effects of software failures and hardware failures, so that they can provide better experiences for their customers. In this paper, I mainly discuss the architectures of MySQL, MongoDB, and Redis, which are high available and have been deployed in practical application environment, and design a hybrid architecture.

High-reliability gas-turbine combined-cycle development program: Phase II. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hecht, K.G.; Sanderson, R.A.; Smith, M.J.

This three-volume report presents the results of Phase II of the multiphase EPRI-sponsored High-Reliability Gas Turbine Combined-Cycle Development Program whose goal is to achieve a highly reliable gas turbine combined-cycle power plant, available by the mid-1980s, which would be an economically attractive baseload generation alternative for the electric utility industry. The Phase II program objective was to prepare the preliminary design of this power plant. This volume presents information of the reliability, availability, and maintainability (RAM) analysis of a representative plant and the preliminary design of the gas turbine, the gas turbine ancillaries, and the balance of plant including themore » steam turbine generator. To achieve the program goals, a gas turbine was incorporated which combined proven reliability characteristics with improved performance features. This gas turbine, designated the V84.3, is the result of a cooperative effort between Kraftwerk Union AG and United Technologies Corporation. Gas turbines of similar design operating in Europe under baseload conditions have demonstrated mean time between failures in excess of 40,000 hours. The reliability characteristics of the gas turbine ancillaries and balance-of-plant equipment were improved through system simplification and component redundancy and by selection of component with inherent high reliability. A digital control system was included with logic, communications, sensor redundancy, and mandual backup. An independent condition monitoring and diagnostic system was also included. Program results provide the preliminary design of a gas turbine combined-cycle baseload power plant. This power plant has a predicted mean time between failure of nearly twice the 3000-hour EPRI goal. The cost of added reliability features is offset by improved performance, which results in a comparable specific cost and an 8% lower cost of electricity compared to present market offerings.« less

Possibilities to improve the aircraft interior comfort experience.

PubMed

Vink, P; Bazley, C; Kamp, I; Blok, M

2012-03-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet trip reports and 153 passenger interviews were used to gather opinions about aspects which need to be improved in order to design a more comfortable aircraft interior. The results show clear relationships between comfort and legroom, hygiene, crew attention and seat/personal space. Passengers rate the newer planes significantly better than older ones, indicating that attention to design for comfort has proven effective. The study also shows that rude flight attendants and bad hygiene reduce the comfort experience drastically and that a high comfort rating is related to higher "fly again" values. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems. M.S. ThesisFinal Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The amount of information contained in the data bases of large-scale information storage and retrieval systems is very large and growing at a rapid rate. The methods available for assessing this information have not been successful in making the information easily available to the people who have the greatest need for it. This thesis describes the design of a personal computer based system which will provide a means for these individuals to retrieve this data through one standardized interface. The thesis identifies each of the major problems associated with providing access to casual users of IS and R systems and describes the manner in which these problems are to be solved by the utilization of the local processing power of a PC. Additional capabilities, not available with standard access methods, are also provided to improve the user's ability to make use of this information. The design of PC/MISI is intended to facilitate its use as a research vehicle. Evaluation mechanisms and possible areas of future research are described. The PC/MISI development effort is part of a larger research effort directed at improving access to remote IS and R systems. This research effort, supported in part by NASA, is also reviewed.

The role of the physical environment in crossing the quality chasm.

PubMed

Henriksen, Kerm; Isaacson, Sandi; Sadler, Blair L; Zimring, Craig M

2007-11-01

Evidence-based design findings are available to help inform hospital decision makers of opportunities for ensuring that quality and safety are designed into new and refurbished facilities. The Institute of Medicine's six quality aims of patient centeredness, safety, effectiveness, efficiency, timeliness, and equity provide an organizing framework for introducing a representative portion of the evidence. Design improvements include single-bed and variable-acuity rooms; electronic access to medical records; greater accommodation for families and visitors; handrails to prevent patient falls; standardization (room layout, equipment, and supplies for improved efficiencies); improved work process flow to reduce delays and wait times; and better assessment of changing demographics, disease conditions, and community needs for appropriately targeted health care services. A recent analysis of the business case suggests that a slight, one-time incremental cost for ensuring safety and quality would be paid back in two to three years in the form of operational savings and increased revenues. Hospitals leaders anticipating new construction projects should take advantage of evidence-based design findings that have the potential of raising the quality of acute care for decades to come.

Essential Tremor: What We Can Learn from Current Pharmacotherapy.

PubMed

Ondo, William

2016-01-01

The pathophysiology of essential tremor, especially at the cellular level, is poorly understood. Although no drug has been specifically designed to treat essential tremor, several medications improve tremor, and others worsen it. Studying the mechanism of actions of these medications can help our understanding of tremor pathophysiology and contribute to future rational drug design. We reviewed literature, concentrating on mechanisms of action, of various medications that mitigate tremor. Many medications have multiple mechanisms of actions, making simple correlations difficult. Medications that increase the duration of opening of gamma-aminobutyric acid (GABA)-A receptors are most consistently associated with tremor improvement. Interestingly, drugs that increase GABA availability have not been associated with improved tremor. Other mechanisms possibly associated with tremor improvement include antagonism of alpha-2 delta subunits associated with calcium channels, inhibition of carbonic anhydrase, and inhibition of the synaptic vesicle protein 2A. Drugs that block voltage-gaited sodium channels do not affect tremor. The ideal beta-adrenergic blocker requires B2 affinity (non-cardiac selective), has no sympathomimetic properties, does not require membrane stabilization properties, and may benefit from good central nervous system penetration. To date, serendipitous observations have provided most of our understanding of tremor cellular physiology. Based on similarities to currently effective drugs or rational approximations and inferences, several currently available agents should be considered for tremor trials.

[Not Available].

PubMed

Paturzo, Marco; Colaceci, Sofia; Clari, Marco; Mottola, Antonella; Alvaro, Rosaria; Vellone, Ercole

2016-01-01

. Mixed methods designs: an innovative methodological approach for nursing research. The mixed method research designs (MM) combine qualitative and quantitative approaches in the research process, in a single study or series of studies. Their use can provide a wider understanding of multifaceted phenomena. This article presents a general overview of the structure and design of MM to spread this approach in the Italian nursing research community. The MM designs most commonly used in the nursing field are the convergent parallel design, the sequential explanatory design, the exploratory sequential design and the embedded design. For each method a research example is presented. The use of MM can be an added value to improve clinical practices as, through the integration of qualitative and quantitative methods, researchers can better assess complex phenomena typical of nursing.

Progress Toward Attractive Stellarators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neilson, G H; Brown, T G; Gates, D A

The quasi-axisymmetric stellarator (QAS) concept offers a promising path to a more compact stellarator reactor, closer in linear dimensions to tokamak reactors than previous stellarator designs. Concept improvements are needed, however, to make it more maintainable and more compatible with high plant availability. Using the ARIES-CS design as a starting point, compact stellarator designs with improved maintenance characteristics have been developed. While the ARIES-CS features a through-the-port maintenance scheme, we have investigated configuration changes to enable a sector-maintenance approach, as envisioned for example in ARIES AT. Three approaches are reported. The first is to make tradeoffs within the QAS designmore » space, giving greater emphasis to maintainability criteria. The second approach is to improve the optimization tools to more accurately and efficiently target the physics properties of importance. The third is to employ a hybrid coil topology, so that the plasma shaping functions of the main coils are shared more optimally, either with passive conductors made of high-temperature superconductor or with local compensation coils, allowing the main coils to become simpler. Optimization tools are being improved to test these approaches.« less

Design factors for a super high energy density Ni-MH battery for military uses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, J.T.; Klein, M.G.

1997-12-01

The nickel-metal hydride battery is a relatively new commercial product which meets the needs for a more environmentally friendly battery than either the lead-acid or nickel-cadmium couples. While the presently available product also provides significantly improved performance over these other batteries, it is believed possible to develop a new generation of Ni-MH batteries with perhaps 80% greater density by using improved hydrogen storage alloys with the capability to store up to 2% by weight hydrogen, improved nickel electrodes which can stably cycle with an electron transfer of greater than 1.5 per nickel atom, and utilizing improved new cell and batterymore » packaging designs which minimize inactive battery weight and volume. This could raise the energy density of today`s commercial product (55--70 Wh/kg) to greater than 120 Wh/kg.« less

Motor recovery after stroke: a systematic review.

PubMed

Langhorne, Peter; Coupar, Fiona; Pollock, Alex

2009-08-01

Loss of functional movement is a common consequence of stroke for which a wide range of interventions has been developed. In this Review, we aimed to provide an overview of the available evidence on interventions for motor recovery after stroke through the evaluation of systematic reviews, supplemented by recent randomised controlled trials. Most trials were small and had some design limitations. Improvements in recovery of arm function were seen for constraint-induced movement therapy, electromyographic biofeedback, mental practice with motor imagery, and robotics. Improvements in transfer ability or balance were seen with repetitive task training, biofeedback, and training with a moving platform. Physical fitness training, high-intensity therapy (usually physiotherapy), and repetitive task training improved walking speed. Although the existing evidence is limited by poor trial designs, some treatments do show promise for improving motor recovery, particularly those that have focused on high-intensity and repetitive task-specific practice.

Reading, Writing, and Publishing Digital Text.

ERIC Educational Resources Information Center

Boone, Randall; Higgins, Kyle

2003-01-01

This article explores current state-of-the-art technologies available for reading, writing, and publishing, including electronic books (ebooks), electronic libraries, and electronic journals. Instructional design, best practices for improving reading skills using ebooks, and copyright issues are discussed. Vignettes offer a positive scenario for…

Education: Firms Offer Academics Polymer Science Training.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1983

1983-01-01

Provides information on industry-sponsored programs for college faculty and advanced undergraduate students designed to improve polymer science training: these include residency programs for professors available at industrial laboratories, establishment of a Polymer Education Award, newsletter on course materials/sources in polymer science,…

Surfing the Protein-Protein Interaction Surface Using Docking Methods: Application to the Design of PPI Inhibitors.

PubMed

Sable, Rushikesh; Jois, Seetharama

2015-06-23

Blocking protein-protein interactions (PPI) using small molecules or peptides modulates biochemical pathways and has therapeutic significance. PPI inhibition for designing drug-like molecules is a new area that has been explored extensively during the last decade. Considering the number of available PPI inhibitor databases and the limited number of 3D structures available for proteins, docking and scoring methods play a major role in designing PPI inhibitors as well as stabilizers. Docking methods are used in the design of PPI inhibitors at several stages of finding a lead compound, including modeling the protein complex, screening for hot spots on the protein-protein interaction interface and screening small molecules or peptides that bind to the PPI interface. There are three major challenges to the use of docking on the relatively flat surfaces of PPI. In this review we will provide some examples of the use of docking in PPI inhibitor design as well as its limitations. The combination of experimental and docking methods with improved scoring function has thus far resulted in few success stories of PPI inhibitors for therapeutic purposes. Docking algorithms used for PPI are in the early stages, however, and as more data are available docking will become a highly promising area in the design of PPI inhibitors or stabilizers.

Identification of metabolic engineering targets for the enhancement of 1,4-butanediol production in recombinant E. coli using large-scale kinetic models.

PubMed

Andreozzi, Stefano; Chakrabarti, Anirikh; Soh, Keng Cher; Burgard, Anthony; Yang, Tae Hoon; Van Dien, Stephen; Miskovic, Ljubisa; Hatzimanikatis, Vassily

2016-05-01

Rational metabolic engineering methods are increasingly employed in designing the commercially viable processes for the production of chemicals relevant to pharmaceutical, biotechnology, and food and beverage industries. With the growing availability of omics data and of methodologies capable to integrate the available data into models, mathematical modeling and computational analysis are becoming important in designing recombinant cellular organisms and optimizing cell performance with respect to desired criteria. In this contribution, we used the computational framework ORACLE (Optimization and Risk Analysis of Complex Living Entities) to analyze the physiology of recombinant Escherichia coli producing 1,4-butanediol (BDO) and to identify potential strategies for improved production of BDO. The framework allowed us to integrate data across multiple levels and to construct a population of large-scale kinetic models despite the lack of available information about kinetic properties of every enzyme in the metabolic pathways. We analyzed these models and we found that the enzymes that primarily control the fluxes leading to BDO production are part of central glycolysis, the lower branch of tricarboxylic acid (TCA) cycle and the novel BDO production route. Interestingly, among the enzymes between the glucose uptake and the BDO pathway, the enzymes belonging to the lower branch of TCA cycle have been identified as the most important for improving BDO production and yield. We also quantified the effects of changes of the target enzymes on other intracellular states like energy charge, cofactor levels, redox state, cellular growth, and byproduct formation. Independent earlier experiments on this strain confirmed that the computationally obtained conclusions are consistent with the experimentally tested designs, and the findings of the present studies can provide guidance for future work on strain improvement. Overall, these studies demonstrate the potential and effectiveness of ORACLE for the accelerated design of microbial cell factories. Copyright © 2016 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Big–deep–smart data in imaging for guiding materials design

DOE PAGES

Kalinin, Sergei V.; Sumpter, Bobby G.; Archibald, Richard K.

2015-09-23

Harnessing big data, deep data, and smart data from state-of-the-art imaging might accelerate the design and realization of advanced functional materials. Here we discuss new opportunities in materials design enabled by the availability of big data in imaging and data analytics approaches, including their limitations, in material systems of practical interest. We specifically focus on how these tools might help realize new discoveries in a timely manner. Such methodologies are particularly appropriate to explore in light of continued improvements in atomistic imaging, modelling and data analytics methods.

Improved waste water vapor compression distillation technology. [for Spacelab

NASA Technical Reports Server (NTRS)

Johnson, K. L.; Nuccio, P. P.; Reveley, W. F.

1977-01-01

The vapor compression distillation process is a method of recovering potable water from crewman urine in a manned spacecraft or space station. A description is presented of the research and development approach to the solution of the various problems encountered with previous vapor compression distillation units. The design solutions considered are incorporated in the preliminary design of a vapor compression distillation subsystem. The new design concepts are available for integration in the next generation of support systems and, particularly, the regenerative life support evaluation intended for project Spacelab.

Big-deep-smart data in imaging for guiding materials design.

PubMed

Kalinin, Sergei V; Sumpter, Bobby G; Archibald, Richard K

2015-10-01

Harnessing big data, deep data, and smart data from state-of-the-art imaging might accelerate the design and realization of advanced functional materials. Here we discuss new opportunities in materials design enabled by the availability of big data in imaging and data analytics approaches, including their limitations, in material systems of practical interest. We specifically focus on how these tools might help realize new discoveries in a timely manner. Such methodologies are particularly appropriate to explore in light of continued improvements in atomistic imaging, modelling and data analytics methods.

Big-deep-smart data in imaging for guiding materials design

NASA Astrophysics Data System (ADS)

Kalinin, Sergei V.; Sumpter, Bobby G.; Archibald, Richard K.

2015-10-01

Harnessing big data, deep data, and smart data from state-of-the-art imaging might accelerate the design and realization of advanced functional materials. Here we discuss new opportunities in materials design enabled by the availability of big data in imaging and data analytics approaches, including their limitations, in material systems of practical interest. We specifically focus on how these tools might help realize new discoveries in a timely manner. Such methodologies are particularly appropriate to explore in light of continued improvements in atomistic imaging, modelling and data analytics methods.

Big–deep–smart data in imaging for guiding materials design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinin, Sergei V.; Sumpter, Bobby G.; Archibald, Richard K.

Harnessing big data, deep data, and smart data from state-of-the-art imaging might accelerate the design and realization of advanced functional materials. Here we discuss new opportunities in materials design enabled by the availability of big data in imaging and data analytics approaches, including their limitations, in material systems of practical interest. We specifically focus on how these tools might help realize new discoveries in a timely manner. Such methodologies are particularly appropriate to explore in light of continued improvements in atomistic imaging, modelling and data analytics methods.

Preliminary design study of advanced composite blade and hub and nonmechanical control system for the tilt-rotor aircraft. Volume 1: Engineering studies

NASA Technical Reports Server (NTRS)

Alexander, H. R.; Smith, K. E.; Mcveigh, M. A.; Dixon, P. G.; Mcmanus, B. L.

1979-01-01

Composite structures technology is applied in a preliminary design study of advanced technology blades and hubs for the XV-15 tilt rotor research demonstrator aircraft. Significant improvements in XV-15 hover and cruise performance are available using blades designed for compatibility with the existing aircraft, i.e., blade installation would not require modification of the airframe, hub or upper controls. Provision of a low risk nonmechanical control system was also studied, and a development specification is given.

Position Paper: Designing Complex Systems to Support Interdisciplinary Cognitive Work

NASA Technical Reports Server (NTRS)

Greene, Melissa T.; Papalambros, Panos Y.; Mcgowan, Anna-Maria R.

2016-01-01

The paper argues that the field we can call cognitive science of interdisciplinary collaboration is an important area of study for improving design of Large-Scale Complex Systems (LaCES) and supporting cognitive work. The paper mostly raised questions that have been documented in earlier qualitative analysis studies, and provided possible avenues of exploration for addressing them. There are likely further contributions from additional disciplines beyond those mentioned in this paper that should be considered and integrated into such a cognitive science framework. Knowledge and awareness of various perspectives will help to inform the types of interventions available for improving LaCES design and functionality. For example, a cognitive interpretation of interdisciplinary collaborations in LaCES elucidated the need for a "translator" or "mediator" in helping subject matter experts to transcend language boundaries, mitigate single discipline bias, support integrative activities, and correct misaligned objectives. Additional research in this direction is likely to uncover similar gaps and opportunities for improvements in practice.

E-KIT: An Electronic-Knowledge Information Tool for Organizing Site Information and Improving Technical Communication with Stakeholders - 13082

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kautsky, Mark; Findlay, Richard C.; Hodges, Rex A.

2013-07-01

Managing technical references for projects that have long histories is hampered by the large collection of documents, each of which might contain discrete pieces of information relevant to the site conceptual model. A database application has been designed to improve the efficiency of retrieving technical information for a project. Although many databases are currently used for accessing analytical and geo-referenced data, applications designed specifically to manage technical reference material for projects are scarce. Retrieving site data from the array of available references becomes an increasingly inefficient use of labor. The electronic-Knowledge Information Tool (e-KIT) is designed as a project-level resourcemore » to access and communicate technical information. The e-KIT is a living tool that grows as new information becomes available, and its value to the project increases as the volume of site information increases. Having all references assembled in one location with complete reference citations and links to elements of the site conceptual model offers a way to enhance communication with outside groups. The published and unpublished references are incorporated into the e-KIT, while the compendium of references serves as a complete bibliography for the project. (authors)« less

Programs to optimize adherence in glaucoma.

PubMed

Kowing, Dianne; Messer, Dawn; Slagle, Scott; Wasik, Alyon

2010-07-01

This study was designed to raise awareness of the materials, devices, and Internet resources available to improve adherence to use of medications for the treatment of glaucoma and to review new devices under development. A review of current indexed literature and Internet resources was conducted. A variety of educational brochures, pamphlets, and fact sheets promoting adherence to ocular hypotensive medications are available through multiple organizations and are easily accessed and ordered on the Internet. Video and Web-based patient educational tools have been designed to support patient adherence to glaucoma management plans and promote open dialogue between patients and providers. Reminder and recall systems that integrate with office software can be sent to cell phones as well as e-mails and personal digital assistant (PDAs), alerting patients to upcoming appointments and reminding them to instill their drops. Bottle devices with dosing support (timers with audible and visual signals and dispensing aids) and electronic monitoring have been shown to promote adherence. New products currently under development to improve the delivery of medications include nanoparticles, punctal plugs, and contact lenses that release glaucoma medications. Many educational materials, services, Internet resources, and devices are available to optometrists to encourage patient adherence to glaucoma treatment and management. Published by Elsevier Inc.

Project Delivery Methods and Contracting Approaches Available for Implementation by the Texas Department of Transportation

DOT National Transportation Integrated Search

2001-10-01

Public agencies across the country are pursuing innovative project delivery methods such as design-build (D-B) and construction manager-at-risk (CM-at-risk) to improve cycle-time performance on projects, and numerous transportation departments are cu...

Reliability, Availability and Maintainability Design Practices Guide. Volume 1,

DTIC Science & Technology

1981-03-01

Experience 7-3-3 Air Force RIV - Avionics 7-3-4 RIW-S Army 7-3-5a The Application of Availability to Linear 7-3-6 Indifference Contracting Improvement...acceptance of the maintain- ability of Air Force ground electronic systems and equipments. Although the notebook is directed at ground electronic systems...conformal coating standardization, a lack of written instructions, and no standardization between fleet activities. The Naval Air Development Center

Stability comparison between commercially available mini-implants and a novel design: part 1.

PubMed

Hong, Christine; Lee, Haofu; Webster, Richard; Kwak, Jinny; Wu, Benjamin M; Moon, Won

2011-07-01

To compare mechanical stability among five mini-implant designs--a newly invented design and four commercially available designs that vary by shape and threading; to calculate external surface area of each design using high-resolution micro-computed tomography; and to evaluate the relationship between surface area and stability results. The four commercially available mini-implants--single-threaded and cylindrical (SC), single-threaded and tapered (ST), double-threaded and cylindrical (DC), double-threaded and tapered (DT)--and a new implant that is designed to engage mostly in cortical bone with shorter and wider dimensions (N1) were inserted in simulated bone with cortical and trabecular bone layers. The mechanical study consisted of torque measurements and lateral displacement tests. External surface area was computed using a 25-µm micro-CT. Maximum insertion torque, maximum removal torque, and force levels for displacements were the highest in N1, followed by DT, ST, DC, and SC (α  =  .05). The surface area was largest in DT, followed by N1, ST, DC, and SC. Surface area engaged in cortical bone, however, was the greatest in N1. The surface area of mini-implants had positive correlation with stability. Among commercial designs, both added tapering and double threading improved stability. N1 was the most stable design within this research design. The new design has the potential to be clinically superior; it has enhanced stability and there is diminished risk of endangering nearby anatomic structures during placement and orthodontic treatment, but the design requires refinements to reduce insertion torque to avoid clinical difficulty and patient discomfort.

Supporting Teachers Learning Through the Collaborative Design of Technology-Enhanced Science Lessons

NASA Astrophysics Data System (ADS)

Kafyulilo, Ayoub C.; Fisser, Petra; Voogt, Joke

2015-12-01

This study used the Interconnected Model of Professional Growth (Clarke & Hollingsworth in Teaching and Teacher Education, 18, 947-967, 2002) to unravel how science teachers' technology integration knowledge and skills developed in a professional development arrangement. The professional development arrangement used Technological Pedagogical Content Knowledge as a conceptual framework and included collaborative design of technology-enhanced science lessons, implementation of the lessons and reflection on outcomes. Support to facilitate the process was offered in the form of collaboration guidelines, online learning materials, exemplary lessons and the availability of an expert. Twenty teachers participated in the intervention. Pre- and post-intervention results showed improvements in teachers' perceived and demonstrated knowledge and skills in integrating technology in science teaching. Collaboration guidelines helped the teams to understand the design process, while exemplary materials provided a picture of the product they had to design. The availability of relevant online materials simplified the design process. The expert was important in providing technological and pedagogical support during design and implementation, and reflected with teachers on how to cope with problems met during implementation.

Design and optimisation of wheel-rail profiles for adhesion improvement

NASA Astrophysics Data System (ADS)

Liu, B.; Mei, T. X.; Bruni, S.

2016-03-01

This paper describes a study for the optimisation of the wheel profile in the wheel-rail system to increase the overall level of adhesion available at the contact interface, in particular to investigate how the wheel and rail profile combination may be designed to ensure the improved delivery of tractive/braking forces even in poor contact conditions. The research focuses on the geometric combination of both wheel and rail profiles to establish how the contact interface may be optimised to increase the adhesion level, but also to investigate how the change in the property of the contact mechanics at the wheel-rail interface may also lead to changes in the vehicle dynamic behaviour.

Shear wave velocity-based evaluation and design of stone column improved ground for liquefaction mitigation

NASA Astrophysics Data System (ADS)

Zhou, Yanguo; Sun, Zhengbo; Chen, Jie; Chen, Yunmin; Chen, Renpeng

2017-04-01

The evaluation and design of stone column improvement ground for liquefaction mitigation is a challenging issue for the state of practice. In this paper, a shear wave velocity-based approach is proposed based on the well-defined correlations of liquefaction resistance (CRR)-shear wave velocity ( V s)-void ratio ( e) of sandy soils, and the values of parameters in this approach are recommended for preliminary design purpose when site specific values are not available. The detailed procedures of pre- and post-improvement liquefaction evaluations and stone column design are given. According to this approach, the required level of ground improvement will be met once the target V s of soil is raised high enough (i.e., no less than the critical velocity) to resist the given earthquake loading according to the CRR- V s relationship, and then this requirement is transferred to the control of target void ratio (i.e., the critical e) according to the V s- e relationship. As this approach relies on the densification of the surrounding soil instead of the whole improved ground and is conservative by nature, specific considerations of the densification mechanism and effect are given, and the effects of drainage and reinforcement of stone columns are also discussed. A case study of a thermal power plant in Indonesia is introduced, where the effectiveness of stone column improved ground was evaluated by the proposed V s-based method and compared with the SPT-based evaluation. This improved ground performed well and experienced no liquefaction during subsequent strong earthquakes.

Launch Vehicle Design Process Description and Training Formulation

NASA Technical Reports Server (NTRS)

Atherton, James; Morris, Charles; Settle, Gray; Teal, Marion; Schuerer, Paul; Blair, James; Ryan, Robert; Schutzenhofer, Luke

1999-01-01

A primary NASA priority is to reduce the cost and improve the effectiveness of launching payloads into space. As a consequence, significant improvements are being sought in the effectiveness, cost, and schedule of the launch vehicle design process. In order to provide a basis for understanding and improving the current design process, a model has been developed for this complex, interactive process, as reported in the references. This model requires further expansion in some specific design functions. Also, a training course for less-experienced engineers is needed to provide understanding of the process, to provide guidance for its effective implementation, and to provide a basis for major improvements in launch vehicle design process technology. The objective of this activity is to expand the description of the design process to include all pertinent design functions, and to develop a detailed outline of a training course on the design process for launch vehicles for use in educating engineers whose experience with the process has been minimal. Building on a previously-developed partial design process description, parallel sections have been written for the Avionics Design Function, the Materials Design Function, and the Manufacturing Design Function. Upon inclusion of these results, the total process description will be released as a NASA TP. The design function sections herein include descriptions of the design function responsibilities, interfaces, interactive processes, decisions (gates), and tasks. Associated figures include design function planes, gates, and tasks, along with other pertinent graphics. Also included is an expanded discussion of how the design process is divided, or compartmentalized, into manageable parts to achieve efficient and effective design. A detailed outline for an intensive two-day course on the launch vehicle design process has been developed herein, and is available for further expansion. The course is in an interactive lecture/workshop format to engage the participants in active learning. The course addresses the breadth and depth of the process, requirements, phases, participants, multidisciplinary aspects, tasks, critical elements,as well as providing guidance from previous lessons learned. The participants are led to develop their own understanding of the current process and how it can be improved. Included are course objectives and a session-by-session outline of course content. Also included is an initial identification of visual aid requirements.

Educating Library Users at the Copperbelt University.

ERIC Educational Resources Information Center

Lungu, Charles B. M.

1990-01-01

Describes a library user education program for first-year students at Zambia's Copperbelt University that is designed to increase student awareness of available resources; improve their skills in independent learning; and enhance the presentation of their coursework. Planning user education programs in conjunction with faculty and other…

Development of an economical, thin, quiet, long-lasting, high friction surface layer, volume 1 : mix design and lab performance testing.

DOT National Transportation Integrated Search

2013-03-01

This project developed and evaluated four new asphalt concrete (AC) mixtures that use locally available : aggregates whenever possible with the ultimate goal of a cost-effective mixture that also improves pavement : performance. Although numerous tac...

7 CFR 958.47 - Research and development.

Code of Federal Regulations, 2010 CFR

2010-01-01

... development projects, and marketing promotion including paid advertising, designed to assist, improve, or... the promotion and advertising of onions may utilize an identifying mark which shall be made available... § 958.46; (2) Its recommendation as to any research projects; and (3) Its recommendation as to promotion...

Improving Learning in Sub-Saharan Africa Using Rigorous Research Designs

ERIC Educational Resources Information Center

Piper, Benjamin

2017-01-01

Education researchers working in sub-Saharan Africa have recently and rapidly expanded the availability of evidence related to the impact of educational interventions on learning outcomes, particularly in preprimary and lower primary education (Ganimian & Murnane, 2016; McEwan, 2015; Popova, Evans, & Arancibia, 2016). Awareness that…

Processes for manufacturing multifocal diffractive-refractive intraocular lenses

NASA Astrophysics Data System (ADS)

Iskakov, I. A.

2017-09-01

Manufacturing methods and design features of modern diffractive-refractive intraocular lenses are discussed. The implantation of multifocal intraocular lenses is the most optimal method of restoring the accommodative ability of the eye after removal of the natural lens. Diffractive-refractive intraocular lenses are the most widely used implantable multifocal lenses worldwide. Existing methods for manufacturing such lenses implement various design solutions to provide the best vision function after surgery. The wide variety of available diffractive-refractive intraocular lens designs reflects the demand for this method of vision correction in clinical practice and the importance of further applied research and development of new technologies for designing improved lens models.

Robust design of microchannel cooler

NASA Astrophysics Data System (ADS)

He, Ye; Yang, Tao; Hu, Li; Li, Leimin

2005-12-01

Microchannel cooler has offered a new method for the cooling of high power diode lasers, with the advantages of small volume, high efficiency of thermal dissipation and low cost when mass-produced. In order to reduce the sensitivity of design to manufacture errors or other disturbances, Taguchi method that is one of robust design method was chosen to optimize three parameters important to the cooling performance of roof-like microchannel cooler. The hydromechanical and thermal mathematical model of varying section microchannel was calculated using finite volume method by FLUENT. A special program was written to realize the automation of the design process for improving efficiency. The optimal design is presented which compromises between optimal cooling performance and its robustness. This design method proves to be available.

Data Availability in Appliance Standards and Labeling Program Development and Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romankiewicz, John; Khanna, Nina; Vine, Edward

2013-05-01

In this report, we describe the necessary data inputs for both standards development and program evaluation and perform an initial assessment of the availability and uncertainty of those data inputs in China. For standards development, we find that China and its standards and labeling program administrators currently has access to the basic market and technical data needed for conducting market and technology assessment and technological and economic analyses. Some data, such as shipments data, is readily available from the China Energy Label product registration database while the availability of other data, including average unit energy consumption, prices and design options,more » needs improvement. Unlike some other countries such as the United States, most of the necessary data for conducting standards development analyses are not publicly available or compiled in a consolidated data source. In addition, improved data on design and efficiency options as well as cost data (e.g., manufacturing costs, mark-ups, production and product use-phase costs) – key inputs to several technoeconomic analyses – are particularly in need given China’s unconsolidated manufacturing industry. For program evaluation, we find that while China can conduct simple savings evaluations on its incentive programs with the data it currently has available from the Ministry of Finance – the program administrator, the savings estimates produced by such an evaluation will carry high uncertainty. As such, China could benefit from an increase in surveying and metering in the next one to three years to decrease the uncertainty surrounding key data points such as unit energy savings and free ridership.« less

Laser-induced damage threshold measurements of optical dielectric coatings at lambda = 1.06 micron

NASA Astrophysics Data System (ADS)

Milev, I. Ia.; Dimov, S. S.; Terziev, D. V.; Iordanova, J. I.; Todorova, L. B.; Gelkova, A. B.

1991-10-01

The laser-induced damage thresholds for lambda = 1.06 micron of commercially available dielectric optical coatings, both antireflective and high reflectance, have been determined. The dependence of the optical coatings stability on design and selection of materials has been investigated. An improvement of the coatings durability by using nonquarterwave layers in addition to the basic design of the mirrors has been obtained. The choice of the coating materials is also discussed.

Design and application of shape memory actuators

NASA Astrophysics Data System (ADS)

Mertmann, M.; Vergani, G.

2008-05-01

The use of shape memory alloys in actuators allows the development of robust, simple and lightweight elements for application in a multitude of different industries. Over the years, the intermetallic compound Nickel-Titanium (NiTi or Nitinol) together with its ternary and quaternary derivates has gained general acceptance as a standard alloy. Even though as many as 99% of all shape memory actuator applications make use of Nitinol there are certain properties of this alloy system which require further research in order to find improvements and new markets: • Lack of higher transformation temperatures in the available alloys in order to open the field of automotive applications (Mf temperature > 80 °C) • Non-linearity in the electrical resistivity in order to improve the controllability of the actuator, • Wide hysteresis in the temperature-vs.-strain behaviour, which has a signi-ficant effect on both, the dynamics of the actuator and its controllability. Hence, there is a constant strive in the field towards an improvement of the related properties. However, these improvements are not always just alloy composition related. There is also a tremendous potential in the thermomechanical treatment of the material and in the design of the actuator. Significant improvement steps are already possible if the usage of the existent materials is optimized for the projected application and if the actuator system is designed in the most efficient way. This paper provides an overview about existent designs, applications and alloys for use in actuators, as well as examples of new shape memory actuator application with improved performance. It also gives an overview about general design rules and reflects about the strengths of the material and the related opportunities for its application.

Information and communication technology needs for distributed communication and coordination during expedition-class spaceflight.

PubMed

Caldwell, B S

2000-09-01

AO-lU. Expedition-class missions are distinct from historical human presence in space in ways that significantly affect information flow and information technology designs for such missions. The centrality of Mission Control in these missions is challenged by the distances, associated communication delays, and durations of expeditions, all of which require crews to have more local resources available to manage on-board situations. The author's current research investigates how ground controllers effectively allocate communications bandwidth, cognitive resources, and knowledge sharing skills during time critical routine and non-routine situations. The research focus is on team-based information and communication technology (ICT) use to provide recommendations for improvements to support adaptive bandwidth allocations and improved sharing of data and knowledge in Mission Control contexts. In order to further improve communication and coordination between controllers and crew, additional ICT support resources will be needed to provide shared context knowledge and dynamic assessment of costs and benefits for accessing local information vs. remote expertise. Crew members will have critical needs to understand the goals, intentions, and situational constraints associated with mission information resources in order to use them most effectively in conditions where ground-based expertise is insufficient or requires more time to access and coordinate than local task demands permit. Results of this research will serve to improve the design and implementation of ICT systems to improve human performance capabilities and system operating tolerances for exploration missions. (Specific research data were not available at the time of publication.)

How to study improvement interventions: a brief overview of possible study types.

PubMed

Portela, Margareth Crisóstomo; Pronovost, Peter J; Woodcock, Thomas; Carter, Pam; Dixon-Woods, Mary

2015-05-01

Improvement (defined broadly as purposive efforts to secure positive change) has become an increasingly important activity and field of inquiry within healthcare. This article offers an overview of possible methods for the study of improvement interventions. The choice of available designs is wide, but debates continue about how far improvement efforts can be simultaneously practical (aimed at producing change) and scientific (aimed at producing new knowledge), and whether the distinction between the practical and the scientific is a real and useful one. Quality improvement projects tend to be applied and, in some senses, self-evaluating. They are not necessarily directed at generating new knowledge, but reports of such projects if well conducted and cautious in their inferences may be of considerable value. They can be distinguished heuristically from research studies, which are motivated by and set out explicitly to test a hypothesis, or otherwise generate new knowledge, and from formal evaluations of improvement projects. We discuss variants of trial designs, quasi-experimental designs, systematic reviews, programme evaluations, process evaluations, qualitative studies, and economic evaluations. We note that designs that are better suited to the evaluation of clearly defined and static interventions may be adopted without giving sufficient attention to the challenges associated with the dynamic nature of improvement interventions and their interactions with contextual factors. Reconciling pragmatism and research rigour is highly desirable in the study of improvement. Trade-offs need to be made wisely, taking into account the objectives involved and inferences to be made. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Development of a knowledge-based system for the design of composite automotive components

NASA Astrophysics Data System (ADS)

Moynihan, Gary P.; Stephens, J. Paul

1997-01-01

Composite materials are comprised of two or more constituents possessing significantly different physical properties. Due to their high strength and light weight, there is an emerging trend to utilize composites in the automotive industry. There is an inherent link between component design and the manufacturing processes necessary for fabrication. To many designers, this situation may be intimidating, since there is frequently little available understanding of composites and their processes. A direct results is high rates of product scrap and rework. Thus, there is a need to implement a systematic approach to composite material design. One such approach is quality function deployment (QFD). By translating customer requirements into design parameters, through the use of heuristics, QFD supports the improvement of product quality during the planning stages prior to actual production. The purpose of this research is to automate the use of knowledge pertaining to the design and application of composite materials within the automobile industry. This is being accomplished through the development of a prototype expert system incorporating a QFD approach. It will provide industry designers with access to knowledge of composite materials that might not be otherwise available.

Essential Tremor: What We Can Learn from Current Pharmacotherapy

PubMed Central

Ondo, William

2016-01-01

Background The pathophysiology of essential tremor, especially at the cellular level, is poorly understood. Although no drug has been specifically designed to treat essential tremor, several medications improve tremor, and others worsen it. Studying the mechanism of actions of these medications can help our understanding of tremor pathophysiology and contribute to future rational drug design. Methods We reviewed literature, concentrating on mechanisms of action, of various medications that mitigate tremor. Results Many medications have multiple mechanisms of actions, making simple correlations difficult. Medications that increase the duration of opening of gamma-aminobutyric acid (GABA)-A receptors are most consistently associated with tremor improvement. Interestingly, drugs that increase GABA availability have not been associated with improved tremor. Other mechanisms possibly associated with tremor improvement include antagonism of alpha-2 delta subunits associated with calcium channels, inhibition of carbonic anhydrase, and inhibition of the synaptic vesicle protein 2A. Drugs that block voltage-gaited sodium channels do not affect tremor. The ideal beta-adrenergic blocker requires B2 affinity (non-cardiac selective), has no sympathomimetic properties, does not require membrane stabilization properties, and may benefit from good central nervous system penetration. Discussion To date, serendipitous observations have provided most of our understanding of tremor cellular physiology. Based on similarities to currently effective drugs or rational approximations and inferences, several currently available agents should be considered for tremor trials. PMID:26989572

Assessing Reading Strategies of Engineering Students: Think Aloud Approach

ERIC Educational Resources Information Center

Nalliveettil, George Mathew

2014-01-01

Literacy in reading and understanding printed words is significant for all undergraduate students to succeed in their academic career. Developments in digital technology improved the quality of academic texts in terms of design, format and layout. Further, availability of academic related English language resources in electronic versions gave…

Make Kids Count: Giving Babies a Smart Beginning.

ERIC Educational Resources Information Center

Thompson, Anne, Ed.

The Smart Beginnings project in Arizona is designed to increase public awareness and parent education about early childhood development and family support resources. The program is intended to identify, link, establish, and expand a public/private family support system and improve the quality and increase availability of infant and toddler child…

Engineered and Other Wood Products - An Opportunity to "Grow the Pie"

Treesearch

Albert Schuler; Craig Adair

2003-01-01

The market for engineered wood products (EWP) is being driven by a number of factors including: technology; reduced availability of old-growth timber; construction activity, and globalization. Specifically, technological developments have allowed the industry to "engineer" or "design" improved performance properties and to utilize former "weed...

Evaluation of an electronic nose for improved biosolids alkaline-stabilization treatment and odor management

USDA-ARS?s Scientific Manuscript database

Electronic nose sensors are designed to detect differences in complex air sample matrices. For example, they have been used in the food industry to monitor process performance and quality control. However, no information is available on the application of sensor arrays to monitor process performanc...

Study of injection molded microcellular polyamide-6 nanocomposites

Treesearch

Mingjun Yuan; Lih-Sheng Turng; Shaoqin Gong; Daniel Caulfield; Chris Hunt; Rick Spindler

2004-01-01

This study aims to explore the processing benefits and property improvements of combining nanocomposites with microcellular injection molding. The microcellular nanocomposite processing was performed on an injection-molding machine equipped with a commercially available supercritical fluid (SCF) system. The molded samples produced based on the Design of Experiments (...

Rationale and Resources for Teaching the Mathematical Modeling of Athletic Training and Performance

ERIC Educational Resources Information Center

Clarke, David C.; Skiba, Philip F.

2013-01-01

A number of professions rely on exercise prescription to improve health or athletic performance, including coaching, fitness/personal training, rehabilitation, and exercise physiology. It is therefore advisable that the professionals involved learn the various tools available for designing effective training programs. Mathematical modeling of…

Creating Science Assessments that Support Inquiry

ERIC Educational Resources Information Center

Day, Martha; Stobaugh, Rebecca; Tassell, Janet; Neiman, Nicholas

2012-01-01

This article discusses the resources available for teachers to apply higher-level thinking and cognitive complexity to their instruction and assessments. While designing higher-level assessments might be a challenging task, doing so not only can improve student achievement in science, it also prepares students for a changing world. Students learn…

Jetliner Alert Systems

NASA Technical Reports Server (NTRS)

1983-01-01

NASA research and design has significantly improved crew alert systems. The Engine Indication and Crew Alerting System (EICAS), developed by Psycho-Linguistic Research Associates, is technologically advanced and able to order alerts by priority. Ames has also developed computer controlled voice synthesizers for readouts during difficult landing approaches. This is available to airplane manufacturers.

An Interactive Model for Studying Student Retention. AIR 1990 Annual Forum Paper.

ERIC Educational Resources Information Center

Glover, Robert H.; Wilcox, Jerry

A design for improving the quality of information available for continuous operational study of student retention at the University of Hartford in Connecticut was examined involving a microcomputer based decision support system for student retention research. The system, an interactive modeling approach to conduct longitudinal and comparative…

Does Student Attrition Explain KIPP's Success?

ERIC Educational Resources Information Center

Nichols-Barrer, Ira; Gill, Brian P.; Gleason, Philip; Tuttle, Christina Clark

2014-01-01

The Knowledge Is Power Program (KIPP) is a network of charter schools designed to improve the educational opportunities available to low-income families. KIPP schools seek to boost their students' academic achievement and ultimately prepare them to enroll and succeed in college. To achieve these objectives, KIPP schools leverage strong…

Mini-Laparoscopy: Instruments and Economics.

PubMed

Shadduck, Phillip P; Paquentin, Eduardo Moreno; Carvalho, Gustavo L; Redan, Jay A

2015-11-01

Mini-laparoscopy (Mini) was pioneered more than 20 years ago, initially with instruments borrowed from other specialties and subsequently with tools designed specifically for Mini. Early adoption of Mini was inhibited though by the limitations of these first-generation instruments, especially functionality and durability. Newer generation Mini instruments have recently become available with improved effector tips, a choice of shaft diameters and lengths, better shaft insulation and electrosurgery capability, improved shaft strength and rotation, more ergonomic handles, low-friction trocar options, and improved instrument durability. Improvements are also occurring in imaging and advanced energy for Mini. The current status of mini-laparoscopy instruments and economics are presented.

Toxic release consequence analysis tool (TORCAT) for inherently safer design plant.

PubMed

Shariff, Azmi Mohd; Zaini, Dzulkarnain

2010-10-15

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage. 2010 Elsevier B.V. All rights reserved.

Optimizing the User Experience: Identifying Opportunities to Improve Use of an Inpatient Portal.

PubMed

Walker, Daniel M; Menser, Terri; Yen, Po-Yin; McAlearney, Ann Scheck

2018-01-01

Patient portals specifically designed for the inpatient setting have significant potential to improve patient care. However, little is known about how the users of this technology, the patients, may interact with the inpatient portals. As a result, hospitals have limited ability to design approaches that support patient use of the portal. This study aims to evaluate the user experience associated with an inpatient portal. We used a Think-Aloud protocol to study user interactions with a commercially available inpatient portal-MyChart Bedside (MCB). Study participants included 19 English-speaking adults over the age of 18 years. In one-on-one sessions, participants narrated their experience using the MCB application and completing eight specific tasks. Recordings were transcribed and coded into three dimensions of the user experience: physical, cognitive, and sociobehavioral. Our analysis of the physical experience highlighted the navigational errors and technical challenges associated with the use of MCB. We also found that issues associated with the cognitive experience included comprehension problems that spurred anxiety and uncertainty. Analysis of the sociobehavioral experience suggested that users have different learning styles and preferences for learning including self-guided, handouts, and in-person training. Inpatient portals may be an effective tool to improve the patient experience in the hospital. Moreover, making this technology available to inpatients may help to foster ongoing use of technology across the care continuum. However, deriving the benefits from the technology requires appropriate support. We identified multiple opportunities for hospital management to intervene. In particular, teaching patients to use the application by making a variety of instructional materials available could help to reduce several identified barriers to use. Additionally, hospitals should be prepared to manage patient anxiety and increased questioning arising from the availability of information in the inpatient portal application. Schattauer GmbH Stuttgart.

Optimizing process and equipment efficiency using integrated methods

NASA Astrophysics Data System (ADS)

D'Elia, Michael J.; Alfonso, Ted F.

1996-09-01

The semiconductor manufacturing industry is continually riding the edge of technology as it tries to push toward higher design limits. Mature fabs must cut operating costs while increasing productivity to remain profitable and cannot justify large capital expenditures to improve productivity. Thus, they must push current tool production capabilities to cut manufacturing costs and remain viable. Working to continuously improve mature production methods requires innovation. Furthermore, testing and successful implementation of these ideas into modern production environments require both supporting technical data and commitment from those working with the process daily. At AMD, natural work groups (NWGs) composed of operators, technicians, engineers, and supervisors collaborate to foster innovative thinking and secure commitment. Recently, an AMD NWG improved equipment cycle time on the Genus tungsten silicide (WSi) deposition system. The team used total productive manufacturing (TPM) to identify areas for process improvement. Improved in-line equipment monitoring was achieved by constructing a real time overall equipment effectiveness (OEE) calculator which tracked equipment down, idle, qualification, and production times. In-line monitoring results indicated that qualification time associated with slow Inspex turn-around time and machine downtime associated with manual cleans contributed greatly to reduced availability. Qualification time was reduced by 75% by implementing a new Inspex monitor pre-staging technique. Downtime associated with manual cleans was reduced by implementing an in-situ plasma etch back to extend the time between manual cleans. A designed experiment was used to optimize the process. Time between 18 hour manual cleans has been improved from every 250 to every 1500 cycles. Moreover defect density realized a 3X improvement. Overall, the team achieved a 35% increase in tool availability. This paper details the above strategies and accomplishments.

Single shot trajectory design for region-specific imaging using linear and nonlinear magnetic encoding fields.

PubMed

Layton, Kelvin J; Gallichan, Daniel; Testud, Frederik; Cocosco, Chris A; Welz, Anna M; Barmet, Christoph; Pruessmann, Klaas P; Hennig, Jürgen; Zaitsev, Maxim

2013-09-01

It has recently been demonstrated that nonlinear encoding fields result in a spatially varying resolution. This work develops an automated procedure to design single-shot trajectories that create a local resolution improvement in a region of interest. The technique is based on the design of optimized local k-space trajectories and can be applied to arbitrary hardware configurations that employ any number of linear and nonlinear encoding fields. The trajectories designed in this work are tested with the currently available hardware setup consisting of three standard linear gradients and two quadrupolar encoding fields generated from a custom-built gradient insert. A field camera is used to measure the actual encoding trajectories up to third-order terms, enabling accurate reconstructions of these demanding single-shot trajectories, although the eddy current and concomitant field terms of the gradient insert have not been completely characterized. The local resolution improvement is demonstrated in phantom and in vivo experiments. Copyright © 2012 Wiley Periodicals, Inc.

Coupled Mechanical-Electrochemical-Thermal Modeling for Accelerated Design of EV Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santhanagopalan, Shriram; Zhang, Chao; Kim, Gi-Heon

2015-05-03

This presentation provides an overview of the mechanical electrochemical-thermal (M-ECT) modeling efforts. The physical phenomena occurring in a battery are many and complex and operate at different scales (particle, electrodes, cell, and pack). A better understanding of the interplay between different physics occurring at different scales through modeling could provide insight to design improved batteries for electric vehicles. Work funded by the U.S. DOE has resulted in development of computer-aided engineering (CAE) tools to accelerate electrochemical and thermal design of batteries; mechanical modeling is under way. Three competitive CAE tools are now commercially available.

Computer numeric control generation of toric surfaces

NASA Astrophysics Data System (ADS)

Bradley, Norman D.; Ball, Gary A.; Keller, John R.

1994-05-01

Until recently, the manufacture of toric ophthalmic lenses relied largely upon expensive, manual techniques for generation and polishing. Recent gains in computer numeric control (CNC) technology and tooling enable lens designers to employ single- point diamond, fly-cutting methods in the production of torics. Fly-cutting methods continue to improve, significantly expanding lens design possibilities while lowering production costs. Advantages of CNC fly cutting include precise control of surface geometry, rapid production with high throughput, and high-quality lens surface finishes requiring minimal polishing. As accessibility and affordability increase within the ophthalmic market, torics promise to dramatically expand lens design choices available to consumers.

Design of case report forms based on a public metadata registry: re-use of data elements to improve compatibility of data.

PubMed

Dugas, Martin

2016-11-29

Clinical trials use many case report forms (CRFs) per patient. Because of the astronomical number of potential CRFs, data element re-use at the design stage is attractive to foster compatibility of data from different trials. The objective of this work is to assess the technical feasibility of a CRF editor with connection to a public metadata registry (MDR) to support data element re-use. Based on the Medical Data Models portal, an ISO/IEC 11179-compliant MDR was implemented and connected to a web-based CRF editor. Three use cases were implemented: re-use at the form, item group and data element levels. CRF design with data element re-use from a public MDR is feasible. A prototypic system is available. The main limitation of the system is the amount of available MDR content.

Heat transfer analysis of catheters used for localized tissue cooling to attenuate reperfusion injury.

PubMed

Merrill, Thomas L; Mitchell, Jennifer E; Merrill, Denise R

2016-08-01

Recent revascularization success for ischemic stroke patients using stentrievers has created a new opportunity for therapeutic hypothermia. By using short term localized tissue cooling interventional catheters can be used to reduce reperfusion injury and improve neurological outcomes. Using experimental testing and a well-established heat exchanger design approach, the ɛ-NTU method, this paper examines the cooling performance of commercially available catheters as function of four practical parameters: (1) infusion flow rate, (2) catheter location in the body, (3) catheter configuration and design, and (4) cooling approach. While saline batch cooling outperformed closed-loop autologous blood cooling at all equivalent flow rates in terms of lower delivered temperatures and cooling capacity, hemodilution, systemic and local, remains a concern. For clinicians and engineers this paper provides insights for the selection, design, and operation of commercially available catheters used for localized tissue cooling. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Power Lander for Support of Long-Term Lunar Presence

NASA Technical Reports Server (NTRS)

Joyner, Russ; Rodriguez, Gary

2004-01-01

Emerging industrial base and the consequent sustained manned Lunar presence will require consistent high power capacities. This paper proposes a first iteration design of a flyable electric power platform which could serve as an enabler of Lunar Development and Exploration. It is intended to support a small facility solo or an emerging industrial base as part of a grid. Lunar Missions, Habitats and Facilities stand to benefit from an expected decade of non-stop operation, the economics of scale, Commercial Off-The-Shelf (COTS) availability, standardization of design, and logistical support for Lunar encampments provided by this architecture. The unattended and unmanned vehicle design is to be man- and robotics-serviceable after delivery by current and proposed heavy-lift boosters. Design continuity within a family of systems will improve reliability through "lessons learned'' in the field. Further, various configurations of the proposed scalable architecture will provide reference platforms for the indigenous construction of similar power plant facilities from in-situ Lunar resources (ISRU). The baseline design should be directed towards those materials available on the Moon and expected to be manufacturable on-site within the first decade of operation.

What are science teacher's ideas about the universe?

NASA Astrophysics Data System (ADS)

Novotný, Jan; Svobodová, Jindřiška

2017-01-01

The new cosmological discoveries over the past two decades have a great impact on physics. We have prepared a new university course The Introduction to Cosmology available for students without deeper math background. The results of research study and the cosmology lecturers' experiences in two years are presented. We have prepared a questionnaire and the case study to find out how students think about the Universe, how they can accept cosmology theoretical ideas. Then we use it for design follow-up activities that help students to improve their understanding. We have observed the students' views on the presented science concept and on the nature of scientific knowledge. We have prepared a questionnaire to find out how students can accept theoretical ideas. This survey was designed especially for future and contemporary science teachers. Then we use the obtained results for design follow-up activities that help students to improve their understanding. Finally the most frequented cosmology misconceptions are discussed.

Redesigned PDC bit solves low hydraulic hp problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-06-01

A new PDC bit design was created to solve a problem a drilling contractor had due to hydraulic horsepower limitations on rigs used in a particular geographical area. The new bit design, which arose from a formal alliance between Exeter Drilling Co. and Hughes Christensen Co. has greatly improved bit cleaning and overall drilling efficiency in applications where only low hydraulic hp is available. The new design has been run successfully in the Denver-Julesburg (D-J) basin of Colorado. The development was described in detail in paper IADC/SPE 35109, ``Unique PDC bit configuration dramatically improves hole cleaning, drilling efficiency in lowmore » hydraulic applications,`` presented by G.J. Hertzler III, Exeter Drilling Co. and J.T. Wankier, Hughes Christensen Co., at the 1996 IADC/SPE Drilling Conference, New Orleans, La., March 12--15. This article is an abstract of that paper, which contains significantly more technical data.« less

Reliability design and verification for launch-vehicle propulsion systems - Report of an AIAA Workshop, Washington, DC, May 16, 17, 1989

NASA Astrophysics Data System (ADS)

Launch vehicle propulsion system reliability considerations during the design and verification processes are discussed. The tools available for predicting and minimizing anomalies or failure modes are described and objectives for validating advanced launch system propulsion reliability are listed. Methods for ensuring vehicle/propulsion system interface reliability are examined and improvements in the propulsion system development process are suggested to improve reliability in launch operations. Also, possible approaches to streamline the specification and procurement process are given. It is suggested that government and industry should define reliability program requirements and manage production and operations activities in a manner that provides control over reliability drivers. Also, it is recommended that sufficient funds should be invested in design, development, test, and evaluation processes to ensure that reliability is not inappropriately subordinated to other management considerations.

Landsat 4 and 5 status and results from Thematic Mapper data analyses

NASA Technical Reports Server (NTRS)

Salomonson, V. V.

1984-01-01

Landsat-1, 2, and 3 have functioned successfully well beyond their design lifetimes of one year and provided a very sizable collection of data. On July 16, 1982 with the successful launch of Landsat-4, a second generation of Landsat satellites was introduced. Landsat-4 continues to make available the observational services which had been provided by the Multispectral Scanner (MSS) on Landsats 1-3. In addition, the new satellite is provided with an improved observational capability which is based on a utilization of the Thematic Mapper (TM). The system status (March 1984) of Landsat-4 is considered along with an evaluation of the MSS, and a description of the design and performance of the TM. Attention is also given to the satellite Landsat-5, which was launched successfully on March 1, 1984, taking into account design modifications leading to improved performance and some scenes provided by the new spacecraft.

Portraiture lens concept in a mobile phone camera

NASA Astrophysics Data System (ADS)

Sheil, Conor J.; Goncharov, Alexander V.

2017-11-01

A small form-factor lens was designed for the purpose of portraiture photography, the size of which allows use within smartphone casing. The current general requirement of mobile cameras having good all-round performance results in a typical, familiar, many-element design. Such designs have little room for improvement, in terms of the available degrees of freedom and highly-demanding target metrics such as low f-number and wide field of view. However, the specific application of the current portraiture lens relaxed the requirement of an all-round high-performing lens, allowing improvement of certain aspects at the expense of others. With a main emphasis on reducing depth of field (DoF), the current design takes advantage of the simple geometrical relationship between DoF and pupil diameter. The system has a large aperture, while a reasonable f-number gives a relatively large focal length, requiring a catadioptric lens design with double ray path; hence, field of view is reduced. Compared to typical mobile lenses, the large diameter reduces depth of field by a factor of four.

A Proposal for an Australian Hydrodynamics Laboratory.

DTIC Science & Technology

1981-05-01

SPAIN Cau~al De CDRV C 0.9x0.9 4.7 11.0 1.6 225 yes Experiencias ijidrodinainica Madrid SWEDEN Swedish State C,R,V C 0.5x0.5 2.2 11 2 atm 53 yes...results of research on topics related to ship design. Currently, detailed design informa- tion on ship hydrodynamics available to Naval Architects in... relating to the introduction, continuous up- dating, and improvement of instrumentation and data acquisition and processing systems. 2. The evaluation and

Integrated programs for mothers with substance abuse issues and their children: a systematic review of studies reporting on child outcomes.

PubMed

Niccols, Alison; Milligan, Karen; Smith, Ainsley; Sword, Wendy; Thabane, Lehana; Henderson, Joanna

2012-04-01

Integrated treatment programs (those that include on-site pregnancy-, parenting-, or child-related services with addiction services) were developed to break the intergenerational cycle of addiction, potential child maltreatment, and poor outcomes for children. To examine the impact and effects of integrated programs for women with substance abuse issues and their children, we performed a systematic review of studies published from 1990 to 2011. Literature search strategies included online bibliographic database searches, checking printed sources, and requests to researchers. Studies were included if all participants were mothers with substance abuse problems at baseline; the treatment program included at least 1 specific substance use treatment and at least 1 parenting or child treatment service; the study design was randomized, quasi-experimental, or cohort; and there were quantitative data on child outcomes. We summarized data on child development, growth, and emotional and behavioral outcomes. Thirteen studies (2 randomized trials, 3 quasi-experimental studies, 8 cohort studies; N=775 children) were included in the review. Most studies using pre-post design indicated improvements in child development (with small to large effects, ds=0.007-1.132) and emotional and behavioral functioning (with most available effect sizes being large, ds=0.652-1.132). Comparison group studies revealed higher scores for infants of women in integrated programs than those not in treatment, with regard to development and most growth parameters (length, weight, and head circumference; with all available effect sizes being large, ds=1.16-2.48). In studies comparing integrated to non-integrated programs, most improvements in emotional and behavioral functioning favored integrated programs and, where available, most effect sizes indicated that this advantage was small (ds=0.22-0.45). Available evidence supports integrated programs, as findings suggest that they are associated with improvements in child development, growth, and emotional and behavioral functioning. More research is required comparing integrated to non-integrated programs. This review highlights the need for improved methodology, study quality, and reporting to improve our understanding of how best to meet the needs of children of women with substance abuse issues. Copyright © 2012 Elsevier Ltd. All rights reserved.

Toward highly efficient electrocatalyst for Li–O 2 batteries using biphasic N-doping cobalt@graphene multiple-capsule heterostructures

DOE PAGES

Tan, Guoqiang; Chong, Lina; Amine, Rachid; ...

2017-04-12

To promote lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport, and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells. The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electro-active zones possible; furthermore, the colander-like porous electrode facilitates themore » oxygen diffusion, catalytic reaction, and stable deposition of discharge products. Finally, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.« less

Design and Evaluation of 10-Gbps Inter-satellite Optical Wireless Communication Link for Improved Performance

NASA Astrophysics Data System (ADS)

Gupta, Amit; Nagpal, Shaina

2017-05-01

Inter-satellite optical wireless communication (IsOWC) systems can be chosen over existing microwave satellite systems for deploying in space in the future due to their high bandwidth, small size, light weight, low power and low cost. However, the IsOWC system suffers from various attenuations due to weather conditions, turbulence or scintillations which limit its performance and decreases its availability. So, in order to improve the performance, IsOWC system using directly modulated laser source is proposed in this work. The system is designed and evaluated to be suitable for high data rate transmissions up to 10 Gbps. The performance of the system is investigated in order to reduce the cost and complexity of link and improving the quality of information signal. Further the proposed IsOWC system is analysed using BER analyser, power meter and oscilloscope Visualizer.

Toward Highly Efficient Electrocatalyst for Li–O 2 Batteries Using Biphasic N-Doping Cobalt@Graphene Multiple-Capsule Heterostructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Guoqiang; Chong, Lina; Amine, Rachid

For the promotion of lithium oxygen batteries available for :practical applications, the development of advanced cathode catalysts with low-high activity, and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@grapbene Multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium oxygen cells. 'The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electroactive zones possible; furthermore the colander-like porousmore » electrode facilitates the oxygen diffusion, catalytic reaction,and stable deposition of discharge products. As a result, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.« less

Toward highly efficient electrocatalyst for Li–O 2 batteries using biphasic N-doping cobalt@graphene multiple-capsule heterostructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Guoqiang; Chong, Lina; Amine, Rachid

To promote lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport, and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells. The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electro-active zones possible; furthermore, the colander-like porous electrode facilitates themore » oxygen diffusion, catalytic reaction, and stable deposition of discharge products. Finally, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.« less

Toward Highly Efficient Electrocatalyst for Li-O2 Batteries Using Biphasic N-Doping Cobalt@Graphene Multiple-Capsule Heterostructures.

PubMed

Tan, Guoqiang; Chong, Lina; Amine, Rachid; Lu, Jun; Liu, Cong; Yuan, Yifei; Wen, Jianguo; He, Kun; Bi, Xuanxuan; Guo, Yuanyuan; Wang, Hsien-Hau; Shahbazian-Yassar, Reza; Al Hallaj, Said; Miller, Dean J; Liu, Dijia; Amine, Khalil

2017-05-10

For the promotion of lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity, and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells. The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electroactive zones possible; furthermore, the colander-like porous electrode facilitates the oxygen diffusion, catalytic reaction, and stable deposition of discharge products. As a result, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.

Development of Sustainable Landscape Designs for Improved Biomass Production in the U.S. Corn Belt

NASA Astrophysics Data System (ADS)

Bonner, Ian J.

Demand for renewable and sustainable energy options has resulted in a significant commitment by the US Government to research pathways for fuel production from biomass. The research presented in this thesis describes one potential pathway to increase the amount of biomass available for biofuel production by integrating dedicated energy crops into agricultural fields. In the first chapter an innovative landscape design method based on subfield placement of an energy crop into row crop fields in central Iowa is used to reduce financial loss for farmers, increase and diversify biomass production, and improve soil resources. The second chapter explores how subfield management decisions may be made using high fidelity data and modeling to balance concerns of primary crop production and economics. This work provides critical forward looking support to agricultural land managers and stakeholders in the biomass and bioenergy industry for pathways to improving land stewardship and energy security.

Redundant and fault-tolerant algorithms for real-time measurement and control systems for weapon equipment.

PubMed

Li, Dan; Hu, Xiaoguang

2017-03-01

Because of the high availability requirements from weapon equipment, an in-depth study has been conducted on the real-time fault-tolerance of the widely applied Compact PCI (CPCI) bus measurement and control system. A redundancy design method that uses heartbeat detection to connect the primary and alternate devices has been developed. To address the low successful execution rate and relatively large waste of time slices in the primary version of the task software, an improved algorithm for real-time fault-tolerant scheduling is proposed based on the Basic Checking available time Elimination idle time (BCE) algorithm, applying a single-neuron self-adaptive proportion sum differential (PSD) controller. The experimental validation results indicate that this system has excellent redundancy and fault-tolerance, and the newly developed method can effectively improve the system availability. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Tritium protective clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, T. P.; Easterly, C. E.

Occupational exposures to radiation from tritium received at present nuclear facilities and potential exposures at future fusion reactor facilities demonstrate the need for improved protective clothing. Important areas relating to increased protection factors of tritium protective ventilation suits are discussed. These areas include permeation processes of tritium through materials, various tests of film permeability, selection and availability of suit materials, suit designs, and administrative procedures. The phenomenological nature of film permeability calls for more standardized and universal test methods, which would increase the amount of directly useful information on impermeable materials. Improvements in suit designs could be expedited and bettermore » communicated to the health physics community by centralizing devlopmental equipment, manpower, and expertise in the field of tritium protection to one or two authoritative institutions.« less

Data and material of the Safe-Range-Inventory: An assistance tool helping to improve the charging infrastructure for electric vehicles.

PubMed

Carbon, Claus-Christian; Gebauer, Fabian

2017-10-01

The Safe-Range-Inventory (SRI) was constructed in order to help public authorities to improve the charging infrastructures for electric vehicles [1; 10.1016/j.trf.2017.04.011]. Specifically, the impact of fast (vs slow) charging stations on people's range anxiety was examined. Ninety-seven electric vehicle users from Germany (81 male; M age =46.3 years, SD =12.1) were recruited to participate in the experimental design. Statistical analyses were conducted using ANOVA for repeated measures to test for interaction effects of available charging stations and remaining range with the dependent variable range anxiety . The full data set is publicly available via https://osf.io/bveyw/ (Carbon and Gebauer, 2017) [2].

Reducing fall risk by improving balance control: development, evaluation and knowledge-translation of new approaches.

PubMed

Maki, Brian E; Sibley, Katherine M; Jaglal, Susan B; Bayley, Mark; Brooks, Dina; Fernie, Geoff R; Flint, Alastair J; Gage, William; Liu, Barbara A; McIlroy, William E; Mihailidis, Alex; Perry, Stephen D; Popovic, Milos R; Pratt, Jay; Zettel, John L

2011-12-01

Falling is a leading cause of serious injury, loss of independence, and nursing-home admission in older adults. Impaired balance control is a major contributing factor. Results from our balance-control studies have been applied in the development of new and improved interventions and assessment tools. Initiatives to facilitate knowledge-translation of this work include setting up a new network of balance clinics, a research-user network and a research-user advisory board. Our findings support the efficacy of the developed balance-training methods, balance-enhancing footwear, neuro-prosthesis, walker design, handrail-cueing system, and handrail-design recommendations in improving specific aspects of balance control. IMPACT ON KNOWLEDGE USERS: A new balance-assessment tool has been implemented in the first new balance clinic, a new balance-enhancing insole is available through pharmacies and other commercial outlets, and handrail design recommendations have been incorporated into 10 Canadian and American building codes. Work in progress is expected to have further impact. Copyright © 2011 National Safety Council and Elsevier Ltd. All rights reserved.

Abstracting data warehousing issues in scientific research.

PubMed

Tews, Cody; Bracio, Boris R

2002-01-01

This paper presents the design and implementation of the Idaho Biomedical Data Management System (IBDMS). This system preprocesses biomedical data from the IMPROVE (Improving Control of Patient Status in Critical Care) library via an Open Database Connectivity (ODBC) connection. The ODBC connection allows for local and remote simulations to access filtered, joined, and sorted data using the Structured Query Language (SQL). The tool is capable of providing an overview of available data in addition to user defined data subset for verification of models of the human respiratory system.

Development of a domain-specific genetic language to design Chlamydomonas reinhardtii expression vectors.

PubMed

Wilson, Mandy L; Okumoto, Sakiko; Adam, Laura; Peccoud, Jean

2014-01-15

Expression vectors used in different biotechnology applications are designed with domain-specific rules. For instance, promoters, origins of replication or homologous recombination sites are host-specific. Similarly, chromosomal integration or viral delivery of an expression cassette imposes specific structural constraints. As de novo gene synthesis and synthetic biology methods permeate many biotechnology specialties, the design of application-specific expression vectors becomes the new norm. In this context, it is desirable to formalize vector design strategies applicable in different domains. Using the design of constructs to express genes in the chloroplast of Chlamydomonas reinhardtii as an example, we show that a vector design strategy can be formalized as a domain-specific language. We have developed a graphical editor of context-free grammars usable by biologists without prior exposure to language theory. This environment makes it possible for biologists to iteratively improve their design strategies throughout the course of a project. It is also possible to ensure that vectors designed with early iterations of the language are consistent with the latest iteration of the language. The context-free grammar editor is part of the GenoCAD application. A public instance of GenoCAD is available at http://www.genocad.org. GenoCAD source code is available from SourceForge and licensed under the Apache v2.0 open source license.

Design and experimental analysis of a new malleovestibulopexy prosthesis using a finite element model of the human middle ear.

PubMed

Vallejo Valdezate, Luis A; Hidalgo Otamendi, Antonio; Hernández, Alberto; Lobo, Fernando; Gil-Carcedo Sañudo, Elisa; Gil-Carcedo García, Luis M

2015-01-01

Many designs of prostheses are available for middle ear surgery. In this study we propose a design for a new prosthesis, which optimises mechanical performance in the human middle ear and improves some deficiencies in the prostheses currently available. Our objective was to design and assess the theoretical acoustic-mechanical behaviour of this new total ossicular replacement prosthesis. The design of this new prosthesis was based on an animal model (an iguana). For the modelling and mechanical analysis of the new prosthesis, we used a dynamic 3D computer model of the human middle ear, based on the finite elements method (FEM). The new malleovestibulopexy prosthesis design demonstrates an acoustical-mechanical performance similar to that of the healthy human middle ear. This new design also has additional advantages, such as ease of implantation and stability in the middle ear. This study shows that computer simulation can be used to design and optimise the vibroacoustic characteristics of middle ear implants and demonstrates the effectiveness of a new malleovestibulopexy prosthesis in reconstructing the ossicular chain. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

Experimental design for three-color and four-color gene expression microarrays.

PubMed

Woo, Yong; Krueger, Winfried; Kaur, Anupinder; Churchill, Gary

2005-06-01

Three-color microarrays, compared with two-color microarrays, can increase design efficiency and power to detect differential expression without additional samples and arrays. Furthermore, three-color microarray technology is currently available at a reasonable cost. Despite the potential advantages, clear guidelines for designing and analyzing three-color experiments do not exist. We propose a three- and a four-color cyclic design (loop) and a complementary graphical representation to help design experiments that are balanced, efficient and robust to hybridization failures. In theory, three-color loop designs are more efficient than two-color loop designs. Experiments using both two- and three-color platforms were performed in parallel and their outputs were analyzed using linear mixed model analysis in R/MAANOVA. These results demonstrate that three-color experiments using the same number of samples (and fewer arrays) will perform as efficiently as two-color experiments. The improved efficiency of the design is somewhat offset by a reduced dynamic range and increased variability in the three-color experimental system. This result suggests that, with minor technological improvements, three-color microarrays using loop designs could detect differential expression more efficiently than two-color loop designs. http://www.jax.org/staff/churchill/labsite/software Multicolor cyclic design construction methods and examples along with additional results of the experiment are provided at http://www.jax.org/staff/churchill/labsite/pubs/yong.

Diabetic Mario: Designing and Evaluating Mobile Games for Diabetes Education.

PubMed

Baghaei, Nilufar; Nandigam, David; Casey, John; Direito, Artur; Maddison, Ralph

2016-08-01

Traditionally, diabetes education has relied on written materials, with limited resources available for children with diabetes. Mobile games can be effective and motivating tools for the promotion of children's health. In our earlier work, we proposed a novel approach for designing computer games aimed at educating children with diabetes. In this article, we apply our game design to a mobile Android game (Mario Brothers). We also introduce four heuristics that are specifically designed for evaluating the mobile game, by adapting traditional usability heuristics. Results of a pilot study (n = 12) to evaluate gameplay over 1-week showed that the children found the game engaging and improved their knowledge of healthy diet and lifestyle.

Review and evaluation of online tobacco dependence treatment training programs for health care practitioners.

PubMed

Selby, Peter; Goncharenko, Karina; Barker, Megan; Fahim, Myra; Timothy, Valerie; Dragonetti, Rosa; Kemper, Katherine; Herie, Marilyn; Hays, J Taylor

2015-04-17

Training health care professionals is associated with increased capacity to deliver evidence-based smoking cessation interventions and increased quit rates among their patients. Online training programs hold promise to provide training but questions remain regarding the quality and usability of available programs. The aim was to assess the quality of English-language online courses in tobacco dependence treatment using a validated instrument. An environmental scan was conducted using the Google search engine to identify available online tobacco dependence treatment courses. The identified courses were then evaluated using the Peer Review Rubric for Online Learning, which was selected based on its ability to evaluate instructional design. It also has clear and concise criteria descriptions to ensure uniformity of evaluations by trained experts. A total of 39 courses were identified, of which 24 unique courses were assessed based on their accessibility and functionality during the period of evaluation. Overall, the course ratings indicated that 17 of 24 courses evaluated failed to meet minimal quality standards and none of the courses evaluated could be ranked as superior. However, many excelled in providing effective navigation, course rationale, and content. Many were weak in the use of instructional design elements, such as teaching effectiveness, learning strategies, instructor's role, and assessment and evaluation. Evaluation results and suggestions for improvement were shared with course administrators. Based on the courses evaluated in this review, course developers are encouraged to employ best practices in instructional design, such as cohesiveness of material, linearity of design, practice exercises, problem solving, and ongoing evaluation to improve existing courses and in the design of new online learning opportunities.

The Einstein Suite: A Web-Based Tool for Rapid and Collaborative Engineering Design and Analysis

NASA Technical Reports Server (NTRS)

Palmer, Richard S.

1997-01-01

Taken together the components of the Einstein Suite provide two revolutionary capabilities - they have the potential to change the way engineering and financial engineering are performed by: (1) providing currently unavailable functionality, and (2) providing a 10-100 times improvement over currently available but impractical or costly functionality.

Teacher Improvement through Peer Teacher Evaluation in Kenyan Schools

ERIC Educational Resources Information Center

Arnodah, Itolondo Wilfrida

2013-01-01

Purpose: This article aims to assess the awareness among educators of strategies put in place for peer teacher evaluation (PTE), and training opportunities availed to them in relation to PTE. Design/methodology/approach: The study was conducted in secondary schools in three selected districts of Western Province of Kenya using a descriptive survey…

Wisconsin System for Instructional Management: Terminal Operator Manual. Practical Paper No. 19.

ERIC Educational Resources Information Center

Bozeman, William C.; And Others

The Wisconsin System for Instructional Management (WIS-SIM) is a computer managed instruction (CMI) system designed to improve instructional decision making in order to maximize the educational progress of each child while making efficient use of the available human, material, and financial resources within an organizational structure such as the…

78 FR 37327 - Endangered and Threatened Wildlife and Plants; Proposed Designation of Critical Habitat for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

..., Otero, Rio Arriba, Sandoval, and Socorro Counties, in New Mexico; Las Animas, Archuleta, and La Plata... knowledgeable individuals with scientific expertise to review our analysis of the best available science and application of that science and to provide any additional scientific information to improve this proposed rule...

Therapeutic Expectancies and Treatment Outcome: A Quantitative Review.

ERIC Educational Resources Information Center

Berman, Jeffrey S.

All available research in which a therapeutic expectancy was directly assessed and than related to a measure of outcome was reviewed. The review revealed that across all studies both client and therapist expectancies appear related to improvement; however, in the better-designed research a differential pattern emerges in which client expectancy no…

Designing Academic Writing Analytics for Civil Law Student Self-Assessment

ERIC Educational Resources Information Center

Knight, Simon; Buckingham Shum, Simon; Ryan, Philippa; Sándor, Ágnes; Wang, Xiaolong

2018-01-01

Research into the teaching and assessment of student writing shows that many students find academic writing a challenge to learn, with legal writing no exception. Improving the availability and quality of timely formative feedback is an important aim. However, the time-consuming nature of assessing writing makes it impractical for instructors to…

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. With the range of styles and options available, there is likely one to meet your needs. The vehicles can be divided into three categories: 1) Hybrid electric vehicles (HEVs), 2) Plug-in hybrid electric vehicles (PHEVs), and 3) All-electric vehicles (EVs).

The National School Lunch Program--Is It Working? Report to the Congress.

ERIC Educational Resources Information Center

Comptroller General of the U.S., Washington, DC.

The National School Lunch Program is designed to safeguard schoolchild health by improving and/or maintaining levels of nutrition, and strengthen the agricultural economy by stimulating food demand. The General Accounting Office (GAO) examined whether the program is meeting its legislative objectives and analyzed available information on what is…

The surface water register: an empirically improved sample frame for monitoring the rivers and streams of Kansas

EPA Science Inventory

State-wide monitoring based on probability survey designs requires a spatially explicit representation of all streams and rivers of interest within a state, i.e., a sample frame. The sample frame should be the best available map representation of the resource. Many stream progr...

Adopting NDN Projects. A Guide for Adult Education Programs.

ERIC Educational Resources Information Center

Office of Vocational and Adult Education (ED), Washington, DC.

This guide is designed to assist adult education leaders and practitioners to consider carefully the adoption of one or more of the available National Diffusion Network (NDN) projects. It is also intended to help them understand their opportunity and responsibility for improving adult education practice through the proper use of adoption…

Designing and Redesigning a Framework for Assessing Students' Understanding of Foundational Fractions Concepts

ERIC Educational Resources Information Center

Mendiburo, Maria; Williams, Laura; Henson, Robert; Hasselbring, Ted

2013-01-01

The fact that research has shown that fractions are among the most difficult mathematical concepts for elementary school students to master (Behr, Harel, Post, & Lesh, 1992; Bezuk & Cramer, 1989; Moss & Case, 1999) provides a compelling motivation for research and innovation focused on improving the available assessment and…

Pest risk maps for invasive alien species: a roadmap for improvement

Treesearch

Robert C. Venette; Darren J. Kriticos; Roger D. Magarey; Frank H. Koch; Richard H.A. Baker; Susan P. Worner; Nadilia N. Gomez Raboteaux; Daniel W. McKenney; Erhard J. Dobesberger; Denys Yemshanov; Paul J. De Barro; William D. Hutchison; Glenn Fowler; Tom M. Kalaris; John Pedlar

2010-01-01

Pest risk maps are powerful visual communication tools to describe where invasive alien species might arrive, establish, spread, or cause harmful impacts. These maps inform strategic and tactical pest management decisions, such as potential restrictions on international trade or the design of pest surveys and domestic quarantines. Diverse methods are available to...

Area efficient layout design of CMOS circuit for high-density ICs

NASA Astrophysics Data System (ADS)

Mishra, Vimal Kumar; Chauhan, R. K.

2018-01-01

Efficient layouts have been an active area of research to accommodate the greater number of devices fabricated on a given chip area. In this work a new layout of CMOS circuit is proposed, with an aim to improve its electrical performance and reduce the chip area consumed. The study shows that the design of CMOS circuit and SRAM cells comprising tapered body reduced source fully depleted silicon on insulator (TBRS FD-SOI)-based n- and p-type MOS devices. The proposed TBRS FD-SOI n- and p-MOSFET exhibits lower sub-threshold slope and higher Ion to Ioff ratio when compared with FD-SOI MOSFET and FinFET technology. Other parameters like power dissipation, delay time and signal-to-noise margin of CMOS inverter circuits show improvement when compared with available inverter designs. The above device design is used in 6-T SRAM cell so as to see the effect of proposed layout on high density integrated circuits (ICs). The SNM obtained from the proposed SRAM cell is 565 mV which is much better than any other SRAM cell designed at 50 nm gate length MOS device. The Sentaurus TCAD device simulator is used to design the proposed MOS structure.

Conceptual design of distillation-based hybrid separation processes.

PubMed

Skiborowski, Mirko; Harwardt, Andreas; Marquardt, Wolfgang

2013-01-01

Hybrid separation processes combine different separation principles and constitute a promising design option for the separation of complex mixtures. Particularly, the integration of distillation with other unit operations can significantly improve the separation of close-boiling or azeotropic mixtures. Although the design of single-unit operations is well understood and supported by computational methods, the optimal design of flowsheets of hybrid separation processes is still a challenging task. The large number of operational and design degrees of freedom requires a systematic and optimization-based design approach. To this end, a structured approach, the so-called process synthesis framework, is proposed. This article reviews available computational methods for the conceptual design of distillation-based hybrid processes for the separation of liquid mixtures. Open problems are identified that must be addressed to finally establish a structured process synthesis framework for such processes.

Application of 3D printing to prototype and develop novel plant tissue culture systems.

PubMed

Shukla, Mukund R; Singh, Amritpal S; Piunno, Kevin; Saxena, Praveen K; Jones, A Maxwell P

2017-01-01

Due to the complex process of designing and manufacturing new plant tissue culture vessels through conventional means there have been limited efforts to innovate improved designs. Further, development and availability of low cost, energy efficient LEDs of various spectra has made it a promising light source for plant growth in controlled environments. However, direct replacement of conventional lighting sources with LEDs does not address problems with uniformity, spectral control, or the challenges in conducting statistically valid experiments to assess the effects of light. Prototyping using 3D printing and LED based light sources could help overcome these limitations and lead to improved culture systems. A modular culture vessel design in which the fluence rate and spectrum of light are independently controlled was designed, prototyped using 3D printing, and evaluated for plant growth. This design is compatible with semi-solid and liquid based culture systems. Observations on morphology, chlorophyll content, and chlorophyll fluorescence based stress parameters from in vitro plants cultured under different light spectra with similar overall fluence rate indicated different responses in Nicotiana tabacum and Artemisia annua plantlets. This experiment validates the utility of 3D printing to design and test functional vessels and demonstrated that optimal light spectra for in vitro plant growth is species-specific. 3D printing was successfully used to prototype novel culture vessels with independently controlled variable fluence rate/spectra LED lighting. This system addresses several limitations associated with current lighting systems, providing more uniform lighting and allowing proper replication/randomization for experimental plant biology while increasing energy efficiency. A complete procedure including the design and prototyping of a culture vessel using 3D printing, commercial scale injection molding of the prototype, and conducting a properly replicated experiment are discussed. This open source design has the scope for further improvement and adaptation and demonstrates the power of 3D printing to improve the design of culture systems.

Drivers of household food availability in sub-Saharan Africa based on big data from small farms

PubMed Central

Frelat, Romain; Lopez-Ridaura, Santiago; Herrero, Mario; Douxchamps, Sabine; Djurfeldt, Agnes Andersson; Erenstein, Olaf; Henderson, Ben; Kassie, Menale; Paul, Birthe K.; Rigolot, Cyrille; Ritzema, Randall S.; Rodriguez, Daniel; van Asten, Piet J. A.; van Wijk, Mark T.

2016-01-01

We calculated a simple indicator of food availability using data from 93 sites in 17 countries across contrasted agroecologies in sub-Saharan Africa (>13,000 farm households) and analyzed the drivers of variations in food availability. Crop production was the major source of energy, contributing 60% of food availability. The off-farm income contribution to food availability ranged from 12% for households without enough food available (18% of the total sample) to 27% for the 58% of households with sufficient food available. Using only three explanatory variables (household size, number of livestock, and land area), we were able to predict correctly the agricultural determined status of food availability for 72% of the households, but the relationships were strongly influenced by the degree of market access. Our analyses suggest that targeting poverty through improving market access and off-farm opportunities is a better strategy to increase food security than focusing on agricultural production and closing yield gaps. This calls for multisectoral policy harmonization, incentives, and diversification of employment sources rather than a singular focus on agricultural development. Recognizing and understanding diversity among smallholder farm households in sub-Saharan Africa is key for the design of policies that aim to improve food security. PMID:26712016

Drivers of household food availability in sub-Saharan Africa based on big data from small farms.

PubMed

Frelat, Romain; Lopez-Ridaura, Santiago; Giller, Ken E; Herrero, Mario; Douxchamps, Sabine; Andersson Djurfeldt, Agnes; Erenstein, Olaf; Henderson, Ben; Kassie, Menale; Paul, Birthe K; Rigolot, Cyrille; Ritzema, Randall S; Rodriguez, Daniel; van Asten, Piet J A; van Wijk, Mark T

2016-01-12

We calculated a simple indicator of food availability using data from 93 sites in 17 countries across contrasted agroecologies in sub-Saharan Africa (>13,000 farm households) and analyzed the drivers of variations in food availability. Crop production was the major source of energy, contributing 60% of food availability. The off-farm income contribution to food availability ranged from 12% for households without enough food available (18% of the total sample) to 27% for the 58% of households with sufficient food available. Using only three explanatory variables (household size, number of livestock, and land area), we were able to predict correctly the agricultural determined status of food availability for 72% of the households, but the relationships were strongly influenced by the degree of market access. Our analyses suggest that targeting poverty through improving market access and off-farm opportunities is a better strategy to increase food security than focusing on agricultural production and closing yield gaps. This calls for multisectoral policy harmonization, incentives, and diversification of employment sources rather than a singular focus on agricultural development. Recognizing and understanding diversity among smallholder farm households in sub-Saharan Africa is key for the design of policies that aim to improve food security.

Leveraging health information exchange to improve population health reporting processes: lessons in using a collaborative-participatory design process.

PubMed

Revere, Debra; Dixon, Brian E; Hills, Rebecca; Williams, Jennifer L; Grannis, Shaun J

2014-01-01

Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public's health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design process provided new insights into public health workflow and allowed the team to quickly triage user requests while managing user expectations within the realm of engineering possibilities. Engaging public health, engineering staff, and investigators in a shared codesigning process ensured that the new forms will not only meet real-life needs but will also support development of a product that will be adopted and, ultimately, improve communicable and infectious disease reporting by clinicians to public health.

Reliability assessment and improvement for a fast corrector power supply in TPS

NASA Astrophysics Data System (ADS)

Liu, Kuo-Bin; Liu, Chen-Yao; Wang, Bao-Sheng; Wong, Yong Seng

2018-07-01

Fast Orbit Feedback System (FOFB) can be installed in a synchrotron light source to eliminate undesired disturbances and to improve the stability of beam orbit. The design and implementation of an accurate and reliable Fast Corrector Power Supply (FCPS) is essential to realize the effectiveness and availability of the FOFB. A reliability assessment for the FCPSs in the FOFB of Taiwan Photon Source (TPS) considering MOSFETs' temperatures is represented in this paper. The FCPS is composed of a full-bridge topology and a low-pass filter. A Hybrid Pulse Width Modulation (HPWM) requiring two MOSFETs in the full-bridge circuit to be operated at high frequency and the other two be operated at the output frequency is adopted to control the implemented FCPS. Due the characteristic of HPWM, the conduction loss and switching loss of each MOSFET in the FCPS is not same. Two of the MOSFETs in the full-bridge circuit will suffer higher temperatures and therefore the circuit reliability of FCPS is reduced. A Modified PWM Scheme (MPWMS) designed to average MOSFETs' temperatures and to improve circuit reliability is proposed in this paper. Experimental results measure the MOSFETs' temperatures of FCPS controlled by the HPWM and the proposed MPWMS. The reliability indices under different PWM controls are then assessed. From the experimental results, it can be observed that the reliability of FCPS using the proposed MPWMS can be improved because the MOSFETs' temperatures are closer. Since the reliability of FCPS can be enhanced, the availability of FOFB can also be improved.

The latest generation in flexible bronchoscopes: a description and evaluation.

PubMed

Hsia, David W; Tanner, Nichole T; Shamblin, Clayton; Mehta, Hiren J; Silvestri, Gerard A; Musani, Ali I

2013-10-01

Since the introduction of the flexible bronchoscope over 50 years ago, bronchoscopists have seen vast improvement in the technology available for diagnostics and therapeutics in the bronchoscopy laboratory. We set forth to evaluate the latest evolution in flexible bronchoscopes with features designed to improve imaging and airway navigation. The BF-Q190, BF-H190, and/or BF-1TH190 bronchoscopes were evaluated prospectively in 105 patients undergoing bronchoscopy from November 2010 to August 2011 at 2 tertiary care centers in the United States. Data collected from each procedure included method of insertion, airway images, and therapeutic interventions. At the completion of the study, 10 bronchoscopists were surveyed using a 7-point Likert scale to identify the perceived benefits of the design. Insertion methods included nasal, oral, laryngeal mask airway or endotracheal tube, and tracheostomy. Procedures performed included bronchoalveolar lavage, endobronchial biopsy or brushing, transbronchial biopsy, transbronchial needle aspiration or injection, peripheral navigation, and large airway therapeutic interventions. Survey of bronchoscopists revealed that when compared with current bronchoscopes, the features rated as having the most significant impact on functionality are the 210-degree tip angulation (average 2.4/3) and rotational capability of the insertion tube (average 2.4/3). The new-generation flexible bronchoscope offers improvement in image quality, magnification options, unique insertion tube rotation, and an increased 210-degree distal tip angulation over currently available flexible bronchoscopes. The bronchoscopes are an overall improvement to the current generation of bronchoscopes. The increased tip angulation and novel rotating insertion tube add the most to improvement in functionality.

Liquid Nitrogen Temperature Operation of a Switching Power Converter

NASA Technical Reports Server (NTRS)

Ray, Biswajit; Gerber, Scott S.; Patterson, Richard L.; Myers, Ira T.

1995-01-01

The performance of a 42/28 V, 175 W, 50 kHz pulse-width modulated buck dc/dc switching power converter at liquid nitrogen temperature (LNT) is compared with room temperature operation. The power circuit as well as the control circuit of the converter, designed with commercially available components, were operated at LNT and resulted in a slight improvement in converter efficiency. The improvement in power MOSFET operation was offset by deteriorating performance of the output diode rectifier at LNT. Performance of the converter could be further improved at low temperatures by using only power MOSFET's as switches. The use of a resonant topology will further improve the circuit performance by reducing the switching noise and loss.

puma: a Bioconductor package for propagating uncertainty in microarray analysis.

PubMed

Pearson, Richard D; Liu, Xuejun; Sanguinetti, Guido; Milo, Marta; Lawrence, Neil D; Rattray, Magnus

2009-07-09

Most analyses of microarray data are based on point estimates of expression levels and ignore the uncertainty of such estimates. By determining uncertainties from Affymetrix GeneChip data and propagating these uncertainties to downstream analyses it has been shown that we can improve results of differential expression detection, principal component analysis and clustering. Previously, implementations of these uncertainty propagation methods have only been available as separate packages, written in different languages. Previous implementations have also suffered from being very costly to compute, and in the case of differential expression detection, have been limited in the experimental designs to which they can be applied. puma is a Bioconductor package incorporating a suite of analysis methods for use on Affymetrix GeneChip data. puma extends the differential expression detection methods of previous work from the 2-class case to the multi-factorial case. puma can be used to automatically create design and contrast matrices for typical experimental designs, which can be used both within the package itself but also in other Bioconductor packages. The implementation of differential expression detection methods has been parallelised leading to significant decreases in processing time on a range of computer architectures. puma incorporates the first R implementation of an uncertainty propagation version of principal component analysis, and an implementation of a clustering method based on uncertainty propagation. All of these techniques are brought together in a single, easy-to-use package with clear, task-based documentation. For the first time, the puma package makes a suite of uncertainty propagation methods available to a general audience. These methods can be used to improve results from more traditional analyses of microarray data. puma also offers improvements in terms of scope and speed of execution over previously available methods. puma is recommended for anyone working with the Affymetrix GeneChip platform for gene expression analysis and can also be applied more generally.

Evaluation of Advanced Access in the National Primary Care Collaborative

PubMed Central

Pickin, Mark; O'Cathain, Alicia; Sampson, Fiona C; Dixon, Simon

2004-01-01

Background: An aim of the National Primary Care Collaborative is to improve quality and access for patients in primary care using principles of Advanced Access. Aims: To determine whether Advanced Access led to improved availability of appointments with general practitioners (GPs) and to examine GPs' views of the process. Design: Observational study. Setting: Four hundred and sixty-two general practices in England participating in four waves of the collaborative during 2000 and 2001. Method: Regression analysis of the collaborative's monthly data on the availability of GP appointments for the 352 practices in waves 1–3, and a postal survey of lead GPs in all four waves. The main outcome measures were the change in mean time to the third available appointment with GPs, and the proportion of GPs thinking it worthwhile participating in the collaborative. Results: The time to the third available appointment improved from a mean of 3.6 to 1.9 days, difference = 1.7 days, 95% confidence interval (CI) = 1.4 to 2.0 days. It improved in two-thirds of practices (66% [219/331]), remained the same in 16% (53/331), and worsened in 18% (59/331). The majority of GPs in all four waves, 83% (308/371, 95% CI = 79 to 87), felt that it was worthwhile participating in the collaborative, although one in 12 practices would not recommend it. One-fifth of GPs cited a lack of resources as a constraint, and some expressed concerns about the trade-off between immediate access and continuity of care. Conclusion: Advanced Access helped practices to improve availability of GP appointments, and was well received by the majority of practices. PMID:15113514

Clinician Use of a Palmtop Drug Reference Guide

PubMed Central

Rothschild, Jeffrey M.; Lee, Thomas H.; Bae, Taran; Bates, David W.

2002-01-01

Objective: Problems involving drug knowledge are one of the most common causes of serious medication errors. Although the information that clinicians need is often available somewhere, retrieving it expeditiously has been problematic. At the same time, clinicians are faced with an ever-expanding pharmacology knowledge base. Recently, point-of-care technology has become more widely available and more practical with the advent of handheld, or palmtop, computing. Therefore, the authors evaluated the clinical contribution of a drug database developed for the handheld computer. ePocrates Rx (formerly known as qRx; ePocrates, San Carlos, California) is a comprehensive drug information guide that is downloadable free from the Internet and designed for the Palm OS platform align="right". Design: A seven-day online survey of 3,000 randomly selected ePocrates Rx users was conducted during March 2000. Measurements: User technology experience, product evaluation and usage patterns, and the effects of the drug reference database on information-seeking behavior, practice efficiency, decision making, and patient care. Results: The survey response rate was 32 percent (n=946). Physicians reported that ePocrates Rx saves time during information retrieval, is easily incorporated into their usual workflow, and improves drug-related decision making. They also felt that it reduced the rate of preventable adverse drug events. Conclusions: Self-reported perceptions by responding clinicians endorse improved access to drug information and improved practice efficiency associated with the use of handheld devices. The clinical and practical value of using these devices in clinical settings will clearly grow further as wireless communication becomes more ubiquitous and as more applications become available. PMID:11971883

Managing design excellence tools during the development of new orthopaedic implants.

PubMed

Défossez, Henri J P; Serhan, Hassan

2013-11-01

Design excellence (DEX) tools have been widely used for years in some industries for their potential to facilitate new product development. The medical sector, targeted by cost pressures, has therefore started adopting them. Numerous tools are available; however only appropriate deployment during the new product development stages can optimize the overall process. The primary study objectives were to describe generic tools and illustrate their implementation and management during the development of new orthopaedic implants, and compile a reference package. Secondary objectives were to present the DEX tool investment costs and savings, since the method can require significant resources for which companies must carefully plan. The publicly available DEX method "Define Measure Analyze Design Verify Validate" was adopted and implemented during the development of a new spinal implant. Several tools proved most successful at developing the correct product, addressing clinical needs, and increasing market penetration potential, while reducing design iterations and manufacturing validations. Cost analysis and Pugh Matrix coupled with multi generation planning enabled developing a strong rationale to activate the project, set the vision and goals. improved risk management and product map established a robust technical verification-validation program. Design of experiments and process quantification facilitated design for manufacturing of critical features, as early as the concept phase. Biomechanical testing with analysis of variance provided a validation model with a recognized statistical performance baseline. Within those tools, only certain ones required minimum resources (i.e., business case, multi generational plan, project value proposition, Pugh Matrix, critical To quality process validation techniques), while others required significant investments (i.e., voice of customer, product usage map, improved risk management, design of experiments, biomechanical testing techniques). All used techniques provided savings exceeding investment costs. Some other tools were considered and found less relevant. A matrix summarized the investment costs and generated estimated savings. Globally, all companies can benefit from using DEX by smartly selecting and estimating those tools with best return on investment at the start of the project. For this, a good understanding of the available company resources, background and development strategy are needed. In conclusion, it was possible to illustrate that appropriate management of design excellence tools can greatly facilitate the development of new orthopaedic implant systems.

Acoustic assessment of speech privacy curtains in two nursing units

PubMed Central

Pope, Diana S.; Miller-Klein, Erik T.

2016-01-01

Hospitals have complex soundscapes that create challenges to patient care. Extraneous noise and high reverberation rates impair speech intelligibility, which leads to raised voices. In an unintended spiral, the increasing noise may result in diminished speech privacy, as people speak loudly to be heard over the din. The products available to improve hospital soundscapes include construction materials that absorb sound (acoustic ceiling tiles, carpet, wall insulation) and reduce reverberation rates. Enhanced privacy curtains are now available and offer potential for a relatively simple way to improve speech privacy and speech intelligibility by absorbing sound at the hospital patient's bedside. Acoustic assessments were performed over 2 days on two nursing units with a similar design in the same hospital. One unit was built with the 1970s’ standard hospital construction and the other was newly refurbished (2013) with sound-absorbing features. In addition, we determined the effect of an enhanced privacy curtain versus standard privacy curtains using acoustic measures of speech privacy and speech intelligibility indexes. Privacy curtains provided auditory protection for the patients. In general, that protection was increased by the use of enhanced privacy curtains. On an average, the enhanced curtain improved sound absorption from 20% to 30%; however, there was considerable variability, depending on the configuration of the rooms tested. Enhanced privacy curtains provide measureable improvement to the acoustics of patient rooms but cannot overcome larger acoustic design issues. To shorten reverberation time, additional absorption, and compact and more fragmented nursing unit floor plate shapes should be considered. PMID:26780959

Acoustic assessment of speech privacy curtains in two nursing units.

PubMed

Pope, Diana S; Miller-Klein, Erik T

2016-01-01

Hospitals have complex soundscapes that create challenges to patient care. Extraneous noise and high reverberation rates impair speech intelligibility, which leads to raised voices. In an unintended spiral, the increasing noise may result in diminished speech privacy, as people speak loudly to be heard over the din. The products available to improve hospital soundscapes include construction materials that absorb sound (acoustic ceiling tiles, carpet, wall insulation) and reduce reverberation rates. Enhanced privacy curtains are now available and offer potential for a relatively simple way to improve speech privacy and speech intelligibility by absorbing sound at the hospital patient's bedside. Acoustic assessments were performed over 2 days on two nursing units with a similar design in the same hospital. One unit was built with the 1970s' standard hospital construction and the other was newly refurbished (2013) with sound-absorbing features. In addition, we determined the effect of an enhanced privacy curtain versus standard privacy curtains using acoustic measures of speech privacy and speech intelligibility indexes. Privacy curtains provided auditory protection for the patients. In general, that protection was increased by the use of enhanced privacy curtains. On an average, the enhanced curtain improved sound absorption from 20% to 30%; however, there was considerable variability, depending on the configuration of the rooms tested. Enhanced privacy curtains provide measureable improvement to the acoustics of patient rooms but cannot overcome larger acoustic design issues. To shorten reverberation time, additional absorption, and compact and more fragmented nursing unit floor plate shapes should be considered.

Design of an advanced bundle divertor for the Demonstration Tokamak Hybrid Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, T.F.; Lee, A.Y.; Ruck, G.W.

1979-01-25

The conclusion of this work is that a bundle divertor, using an improved method of designing the magnetic field configuration, is feasible for the Demonstration Tokamak Hybrid Reactor (DTHR) investigated by Westinghouse. The most significant achievement of this design is the reduction in current density (1 kA/cm/sup 2/) in the divertor coils in comparison to the overall averaged current densities per tesla of field to be nulled for DITE (25 kA/cm/sup 2/) and for ISX-B/sup 2/ (11 kA/cm/sup 2/). Therefore, superconducting magnets can be built into the tight space available with a sound mechanical structure.

Design, Kinematic Optimization, and Evaluation of a Teleoperated System for Middle Ear Microsurgery

PubMed Central

Miroir, Mathieu; Nguyen, Yann; Szewczyk, Jérôme; Sterkers, Olivier; Bozorg Grayeli, Alexis

2012-01-01

Middle ear surgery involves the smallest and the most fragile bones of the human body. Since microsurgical gestures and a submillimetric precision are required in these procedures, the outcome can be potentially improved by robotic assistance. Today, there is no commercially available device in this field. Here, we describe a method to design a teleoperated assistance robotic system dedicated to the middle ear surgery. Determination of design specifications, the kinematic structure, and its optimization are detailed. The robot-surgeon interface and the command modes are provided. Finally, the system is evaluated by realistic tasks in experimental dedicated settings and in human temporal bone specimens. PMID:22927789

Ultrastable BSA-capped gold nanoclusters with a polymer-like shielding layer against reactive oxygen species in living cells

NASA Astrophysics Data System (ADS)

Zhou, Wenjuan; Cao, Yuqing; Sui, Dandan; Guan, Weijiang; Lu, Chao; Xie, Jianping

2016-05-01

The prevalence of reactive oxygen species (ROS) production and the enzyme-containing intracellular environment could lead to the fluorescence quenching of bovine serum albumin (BSA)-capped gold nanoclusters (AuNCs). Here we report an efficient strategy to address this issue, where a polymer-like shielding layer is designed to wrap around the Au core to significantly improve the stability of AuNCs against ROS and protease degradation. The key of our design is to covalently incorporate a thiolated AuNC into the BSA-AuNC via carbodiimide-activated coupling, leading to the formation of a AuNC pair inside the cross-linked BSA molecule. The as-designed paired AuNCs in BSA (or BSA-p-AuNCs for short) show improved performances in living cells.The prevalence of reactive oxygen species (ROS) production and the enzyme-containing intracellular environment could lead to the fluorescence quenching of bovine serum albumin (BSA)-capped gold nanoclusters (AuNCs). Here we report an efficient strategy to address this issue, where a polymer-like shielding layer is designed to wrap around the Au core to significantly improve the stability of AuNCs against ROS and protease degradation. The key of our design is to covalently incorporate a thiolated AuNC into the BSA-AuNC via carbodiimide-activated coupling, leading to the formation of a AuNC pair inside the cross-linked BSA molecule. The as-designed paired AuNCs in BSA (or BSA-p-AuNCs for short) show improved performances in living cells. Electronic supplementary information (ESI) available: Detailed experimental materials, apparatus, experimental procedures and characterization data. See DOI: 10.1039/c6nr02178f

Design Methodology for Multi-Element High-Lift Systems on Subsonic Civil Transport Aircraft

NASA Technical Reports Server (NTRS)

Pepper, R. S.; vanDam, C. P.

1996-01-01

The choice of a high-lift system is crucial in the preliminary design process of a subsonic civil transport aircraft. Its purpose is to increase the allowable aircraft weight or decrease the aircraft's wing area for a given takeoff and landing performance. However, the implementation of a high-lift system into a design must be done carefully, for it can improve the aerodynamic performance of an aircraft but may also drastically increase the aircraft empty weight. If designed properly, a high-lift system can improve the cost effectiveness of an aircraft by increasing the payload weight for a given takeoff and landing performance. This is why the design methodology for a high-lift system should incorporate aerodynamic performance, weight, and cost. The airframe industry has experienced rapid technological growth in recent years which has led to significant advances in high-lift systems. For this reason many existing design methodologies have become obsolete since they are based on outdated low Reynolds number wind-tunnel data and can no longer accurately predict the aerodynamic characteristics or weight of current multi-element wings. Therefore, a new design methodology has been created that reflects current aerodynamic, weight, and cost data and provides enough flexibility to allow incorporation of new data when it becomes available.

Invited review: Recommendations for reporting intervention studies on reproductive performance in dairy cattle: Improving design, analysis, and interpretation of research on reproduction.

PubMed

Lean, Ian J; Lucy, Matthew C; McNamara, John P; Bradford, Barry J; Block, Elliot; Thomson, Jennifer M; Morton, John M; Celi, Pietro; Rabiee, Ahmad R; Santos, José E P; Thatcher, William W; LeBlanc, Stephen J

2016-01-01

Abundant evidence from the medical, veterinary, and animal science literature demonstrates that there is substantial room for improvement of the clarity, completeness, and accuracy of reporting of intervention studies. More rigorous reporting guidelines are needed to improve the quality of data available for use in comparisons of outcomes (or meta-analyses) of multiple studies. Because of the diversity of factors that affect reproduction and the complexity of interactions between these, a systematic approach is required to design, conduct, and analyze basic and applied studies of dairy cattle reproduction. Greater consistency, clarity, completeness, and correctness of design and reporting will improve the value of each report and allow for greater depth of evaluation in meta-analyses. Each of these benefits will improve understanding and application of current knowledge and better identify questions that require additional modeling or primary research. The proposed guidelines and checklist will aid in the design, conduct, analysis, and reporting of intervention studies. We propose an adaptation of the REFLECT (Reporting Guidelines for Randomized Controlled Trials for Livestock and Food Safety) statement to provide guidelines and a checklist specific to reporting intervention studies in dairy cattle reproduction. Furthermore, we provide recommendations that will assist investigators to produce studies with greater internal and external validity that can more often be included in systematic reviews and global meta-analyses. Such studies will also assist the development of models to describe the physiology of reproduction. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Design of a 3D-printed, open-source wrist-driven orthosis for individuals with spinal cord injury

PubMed Central

Mukherjee, Gaurav; Peters, Keshia M.; Yamane, Ann; Steele, Katherine M.

2018-01-01

Assistive technology, such as wrist-driven orthoses (WDOs), can be used by individuals with spinal cord injury to improve hand function. A lack of innovation and challenges in obtaining WDOs have limited their use. These orthoses can be heavy and uncomfortable for users and also time-consuming for orthotists to fabricate. The goal of this research was to design a WDO with user (N = 3) and orthotist (N = 6) feedback to improve the accessibility, customizability, and function of WDOs by harnessing advancements in 3D-printing. The 3D-printed WDO reduced hands-on assembly time to approximately 1.5 hours and the material costs to $15 compared to current fabrication methods. Varying improvements in users' hand function were observed during functional tests, such as the Jebsen Taylor Hand Function Test. For example, one participant's ability on the small object task improved by 29 seconds with the WDO, while another participant took 25 seconds longer to complete this task with the WDO. Two users had a significant increase in grasp strength with the WDO (13–122% increase), while the other participant was able to perform a pinching grasp for the first time. The WDO designs are available open-source to increase accessibility and encourage future innovation. PMID:29470557

Application of Spacesuit Glove Requirements Tools to Athletic and Personal Protective Equipment

NASA Technical Reports Server (NTRS)

England, Scott; Benson, Elizabeth; Melsoh, Miranda; Thompson, Shelby; Rajulu, Sudhakar

2010-01-01

Despite decades of ongoing improvement, astronauts must still struggle with inhibited dexterity and accelerated fatigue due to the requirement of wearing a pressurized Extra-Vehicular Activity (EVA) glove. Recent research in the Anthropometry and Biomechanics Facility at NASA's Johnson Space Center has focused on developing requirements for improvements in the design of the next generation of EVA glove. In the course of this research, it was decided to expand the scope of the testing to include a variety of commercially available athletic and consumer gloves to help provide a more recognizable comparison for investigators and designers to evaluate the current state of EVA glove mobility and strength. This comparison is being provided with the hope that innovative methods may help commercial development of gloves for various athletic and personal protective endeavors.

Methodological issues in negative symptom trials.

PubMed

Marder, Stephen R; Daniel, David G; Alphs, Larry; Awad, A George; Keefe, Richard S E

2011-03-01

Individuals from academia, the pharmaceutical industry, and the US Food and Drug Administration used a workshop format to discuss important methodological issues in the design of trials of pharmacological agents for improving negative symptoms in schizophrenia. The issues addressed included the need for a coprimary functional measure for registration trials; the characteristics of individuals who should enter negative symptom trials; the optimal duration for a proof-of-concept or registration trial; the optimal design of a study of a broad-spectrum agent that treats both positive and negative symptoms or a co-medication that is added to an antipsychotic; the relative strengths and weaknesses of available instruments for measuring negative symptoms; the definition of clinically meaningful improvement for these trials; and whether drugs can be approved for a subdomain of negative symptoms.

Methodological Issues in Negative Symptom Trials

PubMed Central

Marder, Stephen R.; Daniel, David G.; Alphs, Larry; Awad, A. George; Keefe, Richard S. E.

2011-01-01

Individuals from academia, the pharmaceutical industry, and the US Food and Drug Administration used a workshop format to discuss important methodological issues in the design of trials of pharmacological agents for improving negative symptoms in schizophrenia. The issues addressed included the need for a coprimary functional measure for registration trials; the characteristics of individuals who should enter negative symptom trials; the optimal duration for a proof-of-concept or registration trial; the optimal design of a study of a broad-spectrum agent that treats both positive and negative symptoms or a co-medication that is added to an antipsychotic; the relative strengths and weaknesses of available instruments for measuring negative symptoms; the definition of clinically meaningful improvement for these trials; and whether drugs can be approved for a subdomain of negative symptoms. PMID:21270473

Effects of intelligibility on working memory demand for speech perception.

PubMed

Francis, Alexander L; Nusbaum, Howard C

2009-08-01

Understanding low-intelligibility speech is effortful. In three experiments, we examined the effects of intelligibility on working memory (WM) demands imposed by perception of synthetic speech. In all three experiments, a primary speeded word recognition task was paired with a secondary WM-load task designed to vary the availability of WM capacity during speech perception. Speech intelligibility was varied either by training listeners to use available acoustic cues in a more diagnostic manner (as in Experiment 1) or by providing listeners with more informative acoustic cues (i.e., better speech quality, as in Experiments 2 and 3). In the first experiment, training significantly improved intelligibility and recognition speed; increasing WM load significantly slowed recognition. A significant interaction between training and load indicated that the benefit of training on recognition speed was observed only under low memory load. In subsequent experiments, listeners received no training; intelligibility was manipulated by changing synthesizers. Improving intelligibility without training improved recognition accuracy, and increasing memory load still decreased it, but more intelligible speech did not produce more efficient use of available WM capacity. This suggests that perceptual learning modifies the way available capacity is used, perhaps by increasing the use of more phonetically informative features and/or by decreasing use of less informative ones.

The Aspergillus Genome Database: multispecies curation and incorporation of RNA-Seq data to improve structural gene annotations.

PubMed

Cerqueira, Gustavo C; Arnaud, Martha B; Inglis, Diane O; Skrzypek, Marek S; Binkley, Gail; Simison, Matt; Miyasato, Stuart R; Binkley, Jonathan; Orvis, Joshua; Shah, Prachi; Wymore, Farrell; Sherlock, Gavin; Wortman, Jennifer R

2014-01-01

The Aspergillus Genome Database (AspGD; http://www.aspgd.org) is a freely available web-based resource that was designed for Aspergillus researchers and is also a valuable source of information for the entire fungal research community. In addition to being a repository and central point of access to genome, transcriptome and polymorphism data, AspGD hosts a comprehensive comparative genomics toolbox that facilitates the exploration of precomputed orthologs among the 20 currently available Aspergillus genomes. AspGD curators perform gene product annotation based on review of the literature for four key Aspergillus species: Aspergillus nidulans, Aspergillus oryzae, Aspergillus fumigatus and Aspergillus niger. We have iteratively improved the structural annotation of Aspergillus genomes through the analysis of publicly available transcription data, mostly expressed sequenced tags, as described in a previous NAR Database article (Arnaud et al. 2012). In this update, we report substantive structural annotation improvements for A. nidulans, A. oryzae and A. fumigatus genomes based on recently available RNA-Seq data. Over 26 000 loci were updated across these species; although those primarily comprise the addition and extension of untranslated regions (UTRs), the new analysis also enabled over 1000 modifications affecting the coding sequence of genes in each target genome.

Virtual surgical planning, flow simulation, and 3-dimensional electrospinning of patient-specific grafts to optimize Fontan hemodynamics.

PubMed

Siallagan, Dominik; Loke, Yue-Hin; Olivieri, Laura; Opfermann, Justin; Ong, Chin Siang; de Zélicourt, Diane; Petrou, Anastasios; Daners, Marianne Schmid; Kurtcuoglu, Vartan; Meboldt, Mirko; Nelson, Kevin; Vricella, Luca; Johnson, Jed; Hibino, Narutoshi; Krieger, Axel

2018-04-01

Despite advances in the Fontan procedure, there is an unmet clinical need for patient-specific graft designs that are optimized for variations in patient anatomy. The objective of this study is to design and produce patient-specific Fontan geometries, with the goal of improving hepatic flow distribution (HFD) and reducing power loss (P loss ), and manufacturing these designs by electrospinning. Cardiac magnetic resonance imaging data from patients who previously underwent a Fontan procedure (n = 2) was used to create 3-dimensional models of their native Fontan geometry using standard image segmentation and geometry reconstruction software. For each patient, alternative designs were explored in silico, including tube-shaped and bifurcated conduits, and their performance in terms of P loss and HFD probed by computational fluid dynamic (CFD) simulations. The best-performing options were then fabricated using electrospinning. CFD simulations showed that the bifurcated conduit improved HFD between the left and right pulmonary arteries, whereas both types of conduits reduced P loss . In vitro testing with a flow-loop chamber supported the CFD results. The proposed designs were then successfully electrospun into tissue-engineered vascular grafts. Our unique virtual cardiac surgery approach has the potential to improve the quality of surgery by manufacturing patient-specific designs before surgery, that are also optimized with balanced HFD and minimal P loss , based on refinement of commercially available options for image segmentation, computer-aided design, and flow simulations. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Task three: Report: STDN Antenna and preamplifier cost tradeoff study. [combinations of antennas and preamplifiers for several communication environments

NASA Technical Reports Server (NTRS)

1973-01-01

The general goal of this task, STDN Antenna and Preamplifier G/T Study, was to determine cost-effective combinations of antennas and preamplifiers for several sets of conditions for frequency, antenna elevation angle, and rain. The output of the study includes design curves and tables which indicate the best choice of antenna size and preamplifier type to provide a given G/T performance. The report indicates how to evaluate the cost effectiveness of proposed improvements to a given station. Certain parametric variations are presented to emphasize the improvement available by reducing RF losses and improving the antenna feed.

The Location of Community Mental Health Centers in Texas: Some Descriptions and Comparisons.

ERIC Educational Resources Information Center

Valdez, Ramiro

Part of a series of studies designed to lead to policy recommendations to improve mental health services to Mexican Americans in Texas, this monograph explores the availability and accessibility of community mental health centers (CMHCs) throughout the state. In hopes of explaining the underutilization of the centers statewide, the locations of…

Effectiveness of Selected Supplemental Reading Comprehension Interventions: Impacts on a First Cohort of Fifth-Grade Students. NCEE 2009-4032

ERIC Educational Resources Information Center

James-Burdumy, Susanne; Mansfield, Wendy; Deke, John; Carey, Nancy; Lugo-Gil, Julieta; Hershey, Alan; Douglas, Aaron; Gersten, Russell; Newman-Gonchar, Rebecca; Dimino, Joseph; Faddis, Bonnie

2009-01-01

This document reports on the impacts on student achievement for four supplemental reading curricula that use similar overlapping instructional strategies designed to improve reading comprehension in social studies and science text. Fifth-grade reading comprehension for each of three commercially-available curricula (Project CRISS, ReadAbout, and…

Measuring whole-plant transpiration gravimetrically: a scalable automated system built from components

Treesearch

Damian Cirelli; Victor J. Lieffers; Melvin T. Tyree

2012-01-01

Measuring whole-plant transpiration is highly relevant considering the increasing interest in understanding and improving plant water use at the whole-plant level. We present an original software package (Amalthea) and a design to create a system for measuring transpiration using laboratory balances based on the readily available commodity hardware. The system is...

Impact of Baltimore Healthy Eating Zones: An Environmental Intervention to Improve Diet among African American Youth

ERIC Educational Resources Information Center

Shin, Ahyoung; Surkan, Pamela J.; Coutinho, Anastasia J.; Suratkar, Sonali R.; Campbell, Rebecca K.; Rowan, Megan; Sharma, Sangita; Dennisuk, Lauren A.; Karlsen, Micaela; Gass, Anthony; Gittelsohn, Joel

2015-01-01

This study assessed the impact of a youth-targeted multilevel nutrition intervention in Baltimore City. The study used a clustered randomized design in which 7 recreation centers and 21 corner stores received interventions and 7 additional recreation centers served as comparison. The 8-month intervention aimed to increase availability and…

AspectAssay: A Technique for Expanding the Pool of Available Aspect Mining Test Data Using Concern Seeding

ERIC Educational Resources Information Center

Moore, David G., Jr.

2013-01-01

Aspect-oriented software design (AOSD) enables better and more complete separation of concerns in software-intensive systems. By extracting aspect code and relegating crosscutting functionality to aspects, software engineers can improve the maintainability of their code by reducing code tangling and coupling of code concerns. Further, the number…

At A Glance: Electric-Drive Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-07-01

Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. With the range of styles and options available, there is likely one to meet your needs. The vehicles can be divided into three categories: 1) Hybrid electric vehicles (HEVs), 2) Plug-in hybrid electric vehicles (PHEVs), and 3) All-electric vehicles (EVs).

Pest risk maps for invasive alien species: a roadmap for improvement

Treesearch

Robert C. Venette; Darren J. Kriticos; Roger D. Magarey; Frank H. Koch; Richard H. A. Baker; Susan P. Worner; Nadila N. Gomez Raboteaux; Daniel W. McKenney; Erhard J. Dobesberger; Denys Yemshanov; Paul J. De Barro; William D. Hutchinson; Glenn Fowler; Tom M. Kalaris; John Pedlar

2010-01-01

Pest risk maps are powerful visual communication tools to describe where invasive alien species might arrive, establish, spread, or cause harmful impacts. These maps inform strategic and tactical pest management decisions, such as potential restrictions on international trade or the design of pest surveys and domestic quarantines. Diverse methods are available to...

A portable thoracic closed drainage instrument for hemopneumothorax.

PubMed

Tang, Hua; Pan, Tiewen; Qin, Xiong; Xue, Lei; Wu, Bin; Zhao, Xuewei; Sun, Guangyuan; Yuan, Xinyu; Xu, Zhifei

2012-03-01

Hemopneumothorax is a common sequelae of traumatic thoracic injury. The most effective treatment of this condition is thoracic drainage. Despite the common occurrence of this condition, available instruments are difficult to use emergently, particularly when large amounts of patients need to be drained. In the present experiment, a newly designed chest tube and thoracic closed drainage package is described and preliminarily evaluated with the goal to improve the treatment of traumatic hemopneumothorax. Twenty canines were divided into two groups. In one group, the newly designed thoracic closed drainage package was used, whereas in the other group a currently available chest tube and bottle were used. Drainage test, ultrasound examination, flushing test, and tension test were performed to evaluate the effectiveness of the drainage package. We found that the newly-designed drainage tube is as effective as the common tube when evaluated using all of the chosen methods. In addition, the package is very lightweight and portable. The newly-designed thoracic drainage package is very effective in the emergency treatment of thoracic trauma and may be more suitable for the emergency treatment of hemopneumothorax.

Hybrid emergency radiation detection: a wireless sensor network application for consequence management of a radiological release

NASA Astrophysics Data System (ADS)

Kyker, Ronald D.; Berry, Nina; Stark, Doug; Nachtigal, Noel; Kershaw, Chris

2004-08-01

The Hybrid Emergency Radiation Detection (HERD) system is a rapidly deployable ad-hoc wireless sensor network for monitoring the radiation hazard associated with a radiation release. The system is designed for low power, small size, low cost, and rapid deployment in order to provide early notification and minimize exposure. The many design tradeoffs, decisions, and challenges in the implementation of this wireless sensor network design will be presented and compared to the commercial systems available. Our research in a scaleable modular architectural highlights the need and implementation of a system level approach that provides flexibility and adaptability for a variety of applications. This approach seeks to minimize power, provide mission specific specialization, and provide the capability to upgrade the system with the most recent technology advancements by encapsulation and modularity. The implementation of a low power, widely available Real Time Operating System (RTOS) for multitasking with an improvement in code maintenance, portability, and reuse will be presented. Finally future design enhancements technology trends affecting wireless sensor networks will be presented.

Design constraints of the LST fine guidance sensor

NASA Technical Reports Server (NTRS)

Wissinger, A. B.

1975-01-01

The LST Fine Guidance Sensor design is shaped by the rate of occurrence of suitable guide stars, the competition for telescope focal plane space with the Science Instruments, and the sensitivity of candidate image motion sensors. The relationship between these parameters is presented, and sensitivity to faint stars is shown to be of prime importance. An interferometric technique of image motion sensing is shown to have improved sensitivity and, therefore, a reduced focal plane area requirement in comparison with other candidate techniques (image-splitting prism and image dissector tube techniques). Another design requirement is speed in acquiring the guide star in order to maximize the time available for science observations. The design constraints are shown parametrically, and modelling results are presented.

Standardized Radiation Shield Design Methods: 2005 HZETRN

NASA Technical Reports Server (NTRS)

Wilson, John W.; Tripathi, Ram K.; Badavi, Francis F.; Cucinotta, Francis A.

2006-01-01

Research committed by the Langley Research Center through 1995 resulting in the HZETRN code provides the current basis for shield design methods according to NASA STD-3000 (2005). With this new prominence, the database, basic numerical procedures, and algorithms are being re-examined with new methods of verification and validation being implemented to capture a well defined algorithm for engineering design processes to be used in this early development phase of the Bush initiative. This process provides the methodology to transform the 1995 HZETRN research code into the 2005 HZETRN engineering code to be available for these early design processes. In this paper, we will review the basic derivations including new corrections to the codes to insure improved numerical stability and provide benchmarks for code verification.

Computer program to perform cost and weight analysis of transport aircraft. Volume 2: Technical volume

NASA Technical Reports Server (NTRS)

1973-01-01

An improved method for estimating aircraft weight and cost using a unique and fundamental approach was developed. The results of this study were integrated into a comprehensive digital computer program, which is intended for use at the preliminary design stage of aircraft development. The program provides a means of computing absolute values for weight and cost, and enables the user to perform trade studies with a sensitivity to detail design and overall structural arrangement. Both batch and interactive graphics modes of program operation are available.

VARED: Verification and Analysis of Requirements and Early Designs

NASA Technical Reports Server (NTRS)

Badger, Julia; Throop, David; Claunch, Charles

2014-01-01

Requirements are a part of every project life cycle; everything going forward in a project depends on them. Good requirements are hard to write, there are few useful tools to test, verify, or check them, and it is difficult to properly marry them to the subsequent design, especially if the requirements are written in natural language. In fact, the inconsistencies and errors in the requirements along with the difficulty in finding these errors contribute greatly to the cost of the testing and verification stage of flight software projects [1]. Large projects tend to have several thousand requirements written at various levels by different groups of people. The design process is distributed and a lack of widely accepted standards for requirements often results in a product that varies widely in style and quality. A simple way to improve this would be to standardize the design process using a set of tools and widely accepted requirements design constraints. The difficulty with this approach is finding the appropriate constraints and tools. Common complaints against the tools available include ease of use, functionality, and available features. Also, although preferable, it is rare that these tools are capable of testing the quality of the requirements.

Strategies to improve electrode positioning and safety in cochlear implants.

PubMed

Rebscher, S J; Heilmann, M; Bruszewski, W; Talbot, N H; Snyder, R L; Merzenich, M M

1999-03-01

An injection-molded internal supporting rib has been produced to control the flexibility of silicone rubber encapsulated electrodes designed to electrically stimulate the auditory nerve in human subjects with severe to profound hearing loss. The rib molding dies, and molds for silicone rubber encapsulation of the electrode, were designed and machined using AutoCad and MasterCam software packages in a PC environment. After molding, the prototype plastic ribs were iteratively modified based on observations of the performance of the rib/silicone composite insert in a clear plastic model of the human scala tympani cavity. The rib-based electrodes were reliably inserted farther into these models, required less insertion force and were positioned closer to the target auditory neural elements than currently available cochlear implant electrodes. With further design improvements the injection-molded rib may also function to accurately support metal stimulating contacts and wire leads during assembly to significantly increase the manufacturing efficiency of these devices. This method to reliably control the mechanical properties of miniature implantable devices with multiple electrical leads may be valuable in other areas of biomedical device design.

Conceptual Design of a 100 MWe Modular Molten Salt Power Tower Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

James E. Pacheco; Carter Moursund, Dale Rogers, David Wasyluk

2011-09-20

A conceptual design of a 100 MWe modular molten salt solar power tower plant has been developed which can provide capacity factors in the range of 35 to 75%. Compared to single tower plants, the modular design provides a higher degree of flexibility in achieving the desired customer's capacity factor and is obtained simply by adjusting the number of standard modules. Each module consists of a standard size heliostat field and receiver system, hence reengineering and associated unacceptable performance uncertainties due to scaling are eliminated. The modular approach with multiple towers also improves plant availability. Heliostat field components, receivers andmore » towers are shop assembled allowing for high quality and minimal field assembly. A centralized thermal-storage system stores hot salt from the receivers, allowing nearly continuous power production, independent of solar energy collection, and improved parity with the grid. A molten salt steam generator converts the stored thermal energy into steam, which powers a steam turbine generator to produce electricity. This paper describes the conceptual design of the plant, the advantages of modularity, expected performance, pathways to cost reductions, and environmental impact.« less

Rethinking the outpatient medication list: increasing patient activation and education while architecting for centralization and improved medication reconciliation.

PubMed

Pandolfe, Frank; Wright, Adam; Slack, Warner V; Safran, Charles

2018-05-17

Identify barriers impacting the time consuming and error fraught process of medication reconciliation. Design and implement an electronic medication management system where patient and trusted healthcare proxies can participate in establishing and maintaining an inclusive and up-to-date list of medications. A patient-facing electronic medication manager was deployed within an existing research project focused on elder care management funded by the AHRQ, InfoSAGE, allowing patients and patients' proxies the ability to build and maintain an accurate and up-to-date medication list. Free and open-source tools available from the U.S. government were used to embed the tenets of centralization, interoperability, data federation, and patient activation into the design. Using patient-centered design and free, open-source tools, we implemented a web and mobile enabled patient-facing medication manager for complex medication management. Patient and caregiver participation are essential to improve medication safety. Our medication manager is an early step towards a patient-facing medication manager that has been designed with data federation and interoperability in mind.

Model-driven approach to data collection and reporting for quality improvement

PubMed Central

Curcin, Vasa; Woodcock, Thomas; Poots, Alan J.; Majeed, Azeem; Bell, Derek

2014-01-01

Continuous data collection and analysis have been shown essential to achieving improvement in healthcare. However, the data required for local improvement initiatives are often not readily available from hospital Electronic Health Record (EHR) systems or not routinely collected. Furthermore, improvement teams are often restricted in time and funding thus requiring inexpensive and rapid tools to support their work. Hence, the informatics challenge in healthcare local improvement initiatives consists of providing a mechanism for rapid modelling of the local domain by non-informatics experts, including performance metric definitions, and grounded in established improvement techniques. We investigate the feasibility of a model-driven software approach to address this challenge, whereby an improvement model designed by a team is used to automatically generate required electronic data collection instruments and reporting tools. To that goal, we have designed a generic Improvement Data Model (IDM) to capture the data items and quality measures relevant to the project, and constructed Web Improvement Support in Healthcare (WISH), a prototype tool that takes user-generated IDM models and creates a data schema, data collection web interfaces, and a set of live reports, based on Statistical Process Control (SPC) for use by improvement teams. The software has been successfully used in over 50 improvement projects, with more than 700 users. We present in detail the experiences of one of those initiatives, Chronic Obstructive Pulmonary Disease project in Northwest London hospitals. The specific challenges of improvement in healthcare are analysed and the benefits and limitations of the approach are discussed. PMID:24874182

A step-by-step introduction to rule-based design of synthetic genetic constructs using GenoCAD.

PubMed

Wilson, Mandy L; Hertzberg, Russell; Adam, Laura; Peccoud, Jean

2011-01-01

GenoCAD is an open source web-based system that provides a streamlined, rule-driven process for designing genetic sequences. GenoCAD provides a graphical interface that allows users to design sequences consistent with formalized design strategies specific to a domain, organization, or project. Design strategies include limited sets of user-defined parts and rules indicating how these parts are to be combined in genetic constructs. In addition to reducing design time to minutes, GenoCAD improves the quality and reliability of the finished sequence by ensuring that the designs follow established rules of sequence construction. GenoCAD.org is a publicly available instance of GenoCAD that can be found at www.genocad.org. The source code and latest build are available from SourceForge to allow advanced users to install and customize GenoCAD for their unique needs. This chapter focuses primarily on how the GenoCAD tools can be used to organize genetic parts into customized personal libraries, then how these libraries can be used to design sequences. In addition, GenoCAD's parts management system and search capabilities are described in detail. Instructions are provided for installing a local instance of GenoCAD on a server. Some of the future enhancements of this rapidly evolving suite of applications are briefly described. Copyright © 2011 Elsevier Inc. All rights reserved.

Ultra-Low Power Dynamic Knob in Adaptive Compressed Sensing Towards Biosignal Dynamics.

PubMed

Wang, Aosen; Lin, Feng; Jin, Zhanpeng; Xu, Wenyao

2016-06-01

Compressed sensing (CS) is an emerging sampling paradigm in data acquisition. Its integrated analog-to-information structure can perform simultaneous data sensing and compression with low-complexity hardware. To date, most of the existing CS implementations have a fixed architectural setup, which lacks flexibility and adaptivity for efficient dynamic data sensing. In this paper, we propose a dynamic knob (DK) design to effectively reconfigure the CS architecture by recognizing the biosignals. Specifically, the dynamic knob design is a template-based structure that comprises a supervised learning module and a look-up table module. We model the DK performance in a closed analytic form and optimize the design via a dynamic programming formulation. We present the design on a 130 nm process, with a 0.058 mm (2) fingerprint and a 187.88 nJ/event energy-consumption. Furthermore, we benchmark the design performance using a publicly available dataset. Given the energy constraint in wireless sensing, the adaptive CS architecture can consistently improve the signal reconstruction quality by more than 70%, compared with the traditional CS. The experimental results indicate that the ultra-low power dynamic knob can provide an effective adaptivity and improve the signal quality in compressed sensing towards biosignal dynamics.

Sparse PCA corrects for cell type heterogeneity in epigenome-wide association studies.

PubMed

Rahmani, Elior; Zaitlen, Noah; Baran, Yael; Eng, Celeste; Hu, Donglei; Galanter, Joshua; Oh, Sam; Burchard, Esteban G; Eskin, Eleazar; Zou, James; Halperin, Eran

2016-05-01

In epigenome-wide association studies (EWAS), different methylation profiles of distinct cell types may lead to false discoveries. We introduce ReFACTor, a method based on principal component analysis (PCA) and designed for the correction of cell type heterogeneity in EWAS. ReFACTor does not require knowledge of cell counts, and it provides improved estimates of cell type composition, resulting in improved power and control for false positives in EWAS. Corresponding software is available at http://www.cs.tau.ac.il/~heran/cozygene/software/refactor.html.

Redox flow batteries with serpentine flow fields: Distributions of electrolyte flow reactant penetration into the porous carbon electrodes and effects on performance

NASA Astrophysics Data System (ADS)

Ke, Xinyou; Prahl, Joseph M.; Alexander, J. Iwan D.; Savinell, Robert F.

2018-04-01

Redox flow batteries with flow field designs have been demonstrated to boost their capacities to deliver high current density and power density in medium and large-scale energy storage applications. Nevertheless, the fundamental mechanisms involved with improved current density in flow batteries with serpentine flow field designs have been not fully understood. Here we report a three-dimensional model of a serpentine flow field over a porous carbon electrode to examine the distributions of pressure driven electrolyte flow penetrations into the porous carbon electrodes. We also estimate the maximum current densities associated with stoichiometric availability of electrolyte reactant flow penetrations through the porous carbon electrodes. The results predict reasonably well observed experimental data without using any adjustable parameters. This fundamental work on electrolyte flow distributions of limiting reactant availability will contribute to a better understanding of limits on electrochemical performance in flow batteries with serpentine flow field designs and should be helpful to optimizing flow batteries.

Bringing High-Rate, CO2-Based Microbial Electrosynthesis Closer to Practical Implementation through Improved Electrode Design and Operating Conditions.

PubMed

Jourdin, Ludovic; Freguia, Stefano; Flexer, Victoria; Keller, Jurg

2016-02-16

The enhancement of microbial electrosynthesis (MES) of acetate from CO2 to performance levels that could potentially support practical implementations of the technology must go through the optimization of key design and operating conditions. We report that higher proton availability drastically increases the acetate production rate, with pH 5.2 found to be optimal, which will likely suppress methanogenic activity without inhibitor addition. Applied cathode potential as low as -1.1 V versus SHE still achieved 99% of electron recovery in the form of acetate at a current density of around -200 A m(-2). These current densities are leading to an exceptional acetate production rate of up to 1330 g m(-2) day(-1) at pH 6.7. Using highly open macroporous reticulated vitreous carbon electrodes with macropore sizes of about 0.6 mm in diameter was found to be optimal for achieving a good balance between total surface area available for biofilm formation and effective mass transfer between the bulk liquid and the electrode and biofilm surface. Furthermore, we also successfully demonstrated the use of a synthetic biogas mixture as carbon dioxide source, yielding similarly high MES performance as pure CO2. This would allow this process to be used effectively for both biogas quality improvement and conversion of the available CO2 to acetate.

The new NHGRI-EBI Catalog of published genome-wide association studies (GWAS Catalog)

PubMed Central

MacArthur, Jacqueline; Bowler, Emily; Cerezo, Maria; Gil, Laurent; Hall, Peggy; Hastings, Emma; Junkins, Heather; McMahon, Aoife; Milano, Annalisa; Morales, Joannella; Pendlington, Zoe May; Welter, Danielle; Burdett, Tony; Hindorff, Lucia; Flicek, Paul; Cunningham, Fiona; Parkinson, Helen

2017-01-01

The NHGRI-EBI GWAS Catalog has provided data from published genome-wide association studies since 2008. In 2015, the database was redesigned and relocated to EMBL-EBI. The new infrastructure includes a new graphical user interface (www.ebi.ac.uk/gwas/), ontology supported search functionality and an improved curation interface. These developments have improved the data release frequency by increasing automation of curation and providing scaling improvements. The range of available Catalog data has also been extended with structured ancestry and recruitment information added for all studies. The infrastructure improvements also support scaling for larger arrays, exome and sequencing studies, allowing the Catalog to adapt to the needs of evolving study design, genotyping technologies and user needs in the future. PMID:27899670

OSPREY: protein design with ensembles, flexibility, and provable algorithms.

PubMed

Gainza, Pablo; Roberts, Kyle E; Georgiev, Ivelin; Lilien, Ryan H; Keedy, Daniel A; Chen, Cheng-Yu; Reza, Faisal; Anderson, Amy C; Richardson, David C; Richardson, Jane S; Donald, Bruce R

2013-01-01

We have developed a suite of protein redesign algorithms that improves realistic in silico modeling of proteins. These algorithms are based on three characteristics that make them unique: (1) improved flexibility of the protein backbone, protein side-chains, and ligand to accurately capture the conformational changes that are induced by mutations to the protein sequence; (2) modeling of proteins and ligands as ensembles of low-energy structures to better approximate binding affinity; and (3) a globally optimal protein design search, guaranteeing that the computational predictions are optimal with respect to the input model. Here, we illustrate the importance of these three characteristics. We then describe OSPREY, a protein redesign suite that implements our protein design algorithms. OSPREY has been used prospectively, with experimental validation, in several biomedically relevant settings. We show in detail how OSPREY has been used to predict resistance mutations and explain why improved flexibility, ensembles, and provability are essential for this application. OSPREY is free and open source under a Lesser GPL license. The latest version is OSPREY 2.0. The program, user manual, and source code are available at www.cs.duke.edu/donaldlab/software.php. osprey@cs.duke.edu. Copyright © 2013 Elsevier Inc. All rights reserved.

Tabletop Games: Platforms, Experimental Games and Design Recommendations

NASA Astrophysics Data System (ADS)

Haller, Michael; Forlines, Clifton; Koeffel, Christina; Leitner, Jakob; Shen, Chia

While the last decade has seen massive improvements in not only the rendering quality, but also the overall performance of console and desktop video games, these improvements have not necessarily led to a greater population of video game players. In addition to continuing these improvements, the video game industry is also constantly searching for new ways to convert non-players into dedicated gamers. Despite the growing popularity of computer-based video games, people still love to play traditional board games, such as Risk, Monopoly, and Trivial Pursuit. Both video and board games have their strengths and weaknesses, and an intriguing conclusion is to merge both worlds. We believe that a tabletop form-factor provides an ideal interface for digital board games. The design and implementation of tabletop games will be influenced by the hardware platforms, form factors, sensing technologies, as well as input techniques and devices that are available and chosen. This chapter is divided into three major sections. In the first section, we describe the most recent tabletop hardware technologies that have been used by tabletop researchers and practitioners. In the second section, we discuss a set of experimental tabletop games. The third section presents ten evaluation heuristics for tabletop game design.

Fruit and vegetable availability and selection: federal food package revisions, 2009.

PubMed

Zenk, Shannon N; Odoms-Young, Angela; Powell, Lisa M; Campbell, Richard T; Block, Daniel; Chavez, Noel; Krauss, Ramona C; Strode, Steven; Armbruster, James

2012-10-01

With nearly 49,000 authorized retailers nationwide, a policy change that added fruits and vegetables (FV) to the U.S. Department of Agriculture's Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) food packages in 2009 had the potential to expand neighborhood FV availability. This study examined changes in availability and selection of commonly consumed and culturally specific FV at authorized retailers (WIC vendors) before and after implementation of the revised WIC food packages. Quasi-experimental, one-group design with two pre-policy observations and one post-policy observation. Trained observers assessed a list of fresh, frozen, and canned FV at each vendor in seven northern Illinois counties. Eight indices of FV availability and selection were derived. Multiple regression estimated relationships. Data were collected in 2008-2010 and analyzed in 2011. Overall, availability and selection of commonly consumed fresh FV and availability of African-American culturally specific fresh FV improved after implementation of the new policy. Modest improvements in the overall availability of canned low-sodium vegetables and frozen FV were observed. Changes differed by vendor type (large vendor, small vendor, and pharmacy). Changes in availability or selection did not differ by neighborhood characteristics (population density, median household income, racial/ethnic composition). Expansion of WIC foods was associated with small positive externalities on the food environment. Larger subsidies to create more demand and more-substantial stocking requirements for retailers may yield significantly larger improvements and thus warrant further investigation. Approaches targeting rural, low-income, and racial/ethnic minority neighborhoods also may be needed. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Advanced imaging research and development at DARPA

NASA Astrophysics Data System (ADS)

Dhar, Nibir K.; Dat, Ravi

2012-06-01

Advances in imaging technology have huge impact on our daily lives. Innovations in optics, focal plane arrays (FPA), microelectronics and computation have revolutionized camera design. As a result, new approaches to camera design and low cost manufacturing is now possible. These advances are clearly evident in visible wavelength band due to pixel scaling, improvements in silicon material and CMOS technology. CMOS cameras are available in cell phones and many other consumer products. Advances in infrared imaging technology have been slow due to market volume and many technological barriers in detector materials, optics and fundamental limits imposed by the scaling laws of optics. There is of course much room for improvements in both, visible and infrared imaging technology. This paper highlights various technology development projects at DARPA to advance the imaging technology for both, visible and infrared. Challenges and potentials solutions are highlighted in areas related to wide field-of-view camera design, small pitch pixel, broadband and multiband detectors and focal plane arrays.

Compliant Metal Enhanced Convection Cooled Reverse-Flow Annular Combustor

NASA Technical Reports Server (NTRS)

Paskin, Marc D.; Acosta, Waldo A.

1994-01-01

A joint Army/NASA program was conducted to design, fabricate, and test an advanced, reverse-flow, small gas turbine combustor using a compliant metal enhanced (CME) convection wall cooling concept. The objectives of this effort were to develop a design method (basic design data base and analysis) for the CME cooling technique and tben demonstrate its application to an advanced cycle, small, reverse-flow combustor with 3000 F (1922 K) burner outlet temperature (BOT). The CME concept offers significant improvements in wall cooling effectiveness resulting in a large reduction in cooling air requirements. Therefore, more air is available for control of burner outlet temperature pattern in addition to the benefit of improved efficiency, reduced emissions, and smoke levels. Rig test results demonstrated the benefits and viability of the CME concept meeting or exceeding the aerothermal performance and liner wall temperature characteristics of similar lower temperature-rise combustors, achieving 0.15 pattern factor at 3000 F (1922 K) BOT, while utilizing approximately 80 percent less cooling air than conventional, film-cooled combustion systems.

Computational design of auxotrophy-dependent microbial biosensors for combinatorial metabolic engineering experiments.

PubMed

Tepper, Naama; Shlomi, Tomer

2011-01-21

Combinatorial approaches in metabolic engineering work by generating genetic diversity in a microbial population followed by screening for strains with improved phenotypes. One of the most common goals in this field is the generation of a high rate chemical producing strain. A major hurdle with this approach is that many chemicals do not have easy to recognize attributes, making their screening expensive and time consuming. To address this problem, it was previously suggested to use microbial biosensors to facilitate the detection and quantification of chemicals of interest. Here, we present novel computational methods to: (i) rationally design microbial biosensors for chemicals of interest based on substrate auxotrophy that would enable their high-throughput screening; (ii) predict engineering strategies for coupling the synthesis of a chemical of interest with the production of a proxy metabolite for which high-throughput screening is possible via a designed bio-sensor. The biosensor design method is validated based on known genetic modifications in an array of E. coli strains auxotrophic to various amino-acids. Predicted chemical production rates achievable via the biosensor-based approach are shown to potentially improve upon those predicted by current rational strain design approaches. (A Matlab implementation of the biosensor design method is available via http://www.cs.technion.ac.il/~tomersh/tools).

The development of anti-heat stress clothing for construction workers in hot and humid weather.

PubMed

Chan, Albert P C; Guo, Y P; Wong, Francis K W; Li, Y; Sun, S; Han, X

2016-04-01

The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge's functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers' heat stress and improve their comfort and work performance. Practitioner Summary: The construction workers' uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge's functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers' heat stress and improve their comfort and work performance.

Application of the Materials-by-Design Methodology to Redesign a New Grade of the High-Strength Low-Alloy Class of Steels with Improved Mechanical Properties and Processability

NASA Astrophysics Data System (ADS)

Grujicic, M.; Snipes, J. S.; Ramaswami, S.

2016-01-01

An alternative to the traditional trial-and-error empirical approach for the development of new materials is the so-called materials-by-design approach. Within the latter approach, a material is treated as a complex system and its design and optimization is carried out by employing computer-aided engineering analyses, predictive tools, and available material databases. In the present work, the materials-by-design approach is utilized to redesign a grade of high-strength low-alloy (HSLA) class of steels with improved mechanical properties (primarily strength and fracture toughness), processability (e.g., castability, hot formability, and weldability), and corrosion resistance. Toward that end, a number of material thermodynamics, kinetics of phase transformations, and physics of deformation and fracture computational models and databases have been developed/assembled and utilized within a multi-disciplinary, two-level material-by-design optimization scheme. To validate the models, their prediction is compared against the experimental results for the related steel HSLA100. Then the optimization procedure is employed to determine the optimal chemical composition and the tempering schedule for a newly designed grade of the HSLA class of steels with enhanced mechanical properties, processability, and corrosion resistance.

Management systems, patient quality improvement, resource availability, and substance abuse treatment quality.

PubMed

Fields, Dail; Roman, Paul M; Blum, Terry C

2012-06-01

To examine the relationships among general management systems, patient-focused quality management/continuous process improvement (TQM/CPI) processes, resource availability, and multiple dimensions of substance use disorder (SUD) treatment. Data are from a nationally representative sample of 221 SUD treatment centers through the National Treatment Center Study (NTCS). The design was a cross-sectional field study using latent variable structural equation models. The key variables are management practices, TQM/continuous quality improvement (CQI) practices, resource availability, and treatment center performance. Interviews and questionnaires provided data from treatment center administrative directors and clinical directors in 2007-2008. Patient-focused TQM/CQI practices fully mediated the relationship between internal management practices and performance. The effects of TQM/CQI on performance are significantly larger for treatment centers with higher levels of staff per patient. Internal management practices may create a setting that supports implementation of specific patient-focused practices and protocols inherent to TQM/CQI processes. However, the positive effects of internal management practices on treatment center performance occur through use of specific patient-focused TQM/CPI practices and have more impact when greater amounts of supporting resources are present. © Health Research and Educational Trust.

Experience-based co-design in an adult psychological therapies service.

PubMed

Cooper, Kate; Gillmore, Chris; Hogg, Lorna

2016-01-01

Experience-based co-design (EBCD) is a methodology for service improvement and development, which puts service-user voices at the heart of improving health services. The aim of this paper was to implement the EBCD methodology in a mental health setting, and to investigate the challenges which arise during this process. In order to achieve this, a modified version of the EBCD methodology was undertaken, which involved listening to the experiences of the people who work in and use the mental health setting and sharing these experiences with the people who could effect change within the service, through collaborative work between service-users, staff and managers. EBCD was implemented within the mental health setting and was well received by service-users, staff and stakeholders. A number of modifications were necessary in this setting, for example high levels of support available to participants. It was concluded that EBCD is a suitable methodology for service improvement in mental health settings.

SURFACTANT - POLYMER INTERACTION FOR IMPROVED OIL RECOVERY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

1998-10-01

The goal of this research is to use the interaction between a surfactant and a polymer for efficient displacement of tertiary oil by improving slug integrity, adsorption and mobility control. Surfactant--polymer flooding has been shown to be highly effective in laboratory-scale linear floods. The focus of this proposal is to design an inexpensive surfactant-polymer mixture that can efficiently recover tertiary oil by avoiding surfactant slug degradation high adsorption and viscous/heterogeneity fingering. A mixture comprising a ''pseudo oil'' with appropriate surfactant and polymer has been selected to study micellar-polymer chemical flooding. The physical properties and phase behavior of this system havemore » been determined. A surfactant-polymer slug has been designed to achieve high efficiency recovery by improving phase behavior and mobility control. Recovery experiments have been performed on linear cores and a quarter 5-spot. The same recovery experiments have been simulated using a commercially available simulator (UTCHEM). Good agreement between experimental data and simulation results has been achieved.« less

Availability of herbal medicines and medicinal plants in the primary health facilities of the state of São Paulo, Southeast Brazil: results from the National Program for Access and Quality Improvement in Primary Care.

PubMed

Caccia-Bava, Maria do Carmo Gullaci Guimarães; Bertoni, Bianca Waléria; Pereira, Ana Maria Soares; Martinez, Edson Zangiacomi

2017-05-01

This study aims to describe the availability of herbal medicines and medicinal plants in the primary care facilities in the state of São Paulo, Southeast Brazil, from the results of the first cycle of the National Program for Access and Quality Improvement in Primary Care (PMAQ). The PMAQ uses a national cross-sectional multicenter design, with data from 4,249 health facilities distributed among 645 municipalities of the state of São Paulo. Of these facilities, 467 (11%) had herbal medicines and/or medicinal plants. Among the 645 municipalities, 104 (16.1%) had at least one health facility that provided these drugs. We observed that the availability of herbal medicines is greater in larger cities with better social and economic conditions. Furthermore, we found that use of industrialized herbal medicines prevailed over that of vegetal drugs or compounded herbal medicines.

The resource curse and child mortality, 1961-2011.

PubMed

Wigley, Simon

2017-03-01

There is now an extensive literature on the adverse effect of petroleum wealth on the political, economic and social well-being of a country. In this study we examine whether the so-called resource curse extends to the health of children, as measured by under-five mortality. We argue that the type of revenue available to governments in petroleum-rich countries reduces their incentive to improve child health. Whereas the type of revenue available to governments in petroleum-poor countries encourages policies designed to improve child health. In order to test that line of argument we employ a panel of 167 countries (all countries with populations above 250,000) for the years 1961-2011. We find robust evidence that petroleum-poor countries outperform petroleum-rich countries when it comes to reducing under-five mortality. This suggests that governments in oil abundant countries often fail to effectively use the resource windfall at their disposal to improve child health. Copyright © 2017 Elsevier Ltd. All rights reserved.

The availability and effectiveness of tools supporting shared decision making in metastatic breast cancer care: a review.

PubMed

Spronk, Inge; Burgers, Jako S; Schellevis, François G; van Vliet, Liesbeth M; Korevaar, Joke C

2018-05-11

Shared decision-making (SDM) in the management of metastatic breast cancer care is associated with positive patient outcomes. In daily clinical practice, however, SDM is not fully integrated yet. Initiatives to improve the implementation of SDM would be helpful. The aim of this review was to assess the availability and effectiveness of tools supporting SDM in metastatic breast cancer care. Literature databases were systematically searched for articles published since 2006 focusing on the development or evaluation of tools to improve information-provision and to support decision-making in metastatic breast cancer care. Internet searches and experts identified additional tools. Data from included tools were extracted and the evaluation of tools was appraised using the GRADE grading system. The literature search yielded five instruments. In addition, two tools were identified via internet searches and consultation of experts. Four tools were specifically developed for supporting SDM in metastatic breast cancer, the other three tools focused on metastatic cancer in general. Tools were mainly applicable across the care process, and usable for decisions on supportive care with or without chemotherapy. All tools were designed for patients to be used before a consultation with the physician. Effects on patient outcomes were generally weakly positive although most tools were not studied in well-designed studies. Despite its recognized importance, only two tools were positively evaluated on effectiveness and are available to support patients with metastatic breast cancer in SDM. These tools show promising results in pilot studies and focus on different aspects of care. However, their effectiveness should be confirmed in well-designed studies before implementation in clinical practice. Innovation and development of SDM tools targeting clinicians as well as patients during a clinical encounter is recommended.

Local incentive spirometry improves peak expiratory flow rate in teenage sickle cell anaemia patients: a randomized pilot trial.

PubMed

Adeniyi, A F; Saminu, K S

2011-09-01

Efforts to promote better health of sickle cell anaemia (SCA) patients in low-income countries through the use of cheap and available alternatives are desirable. We investigated whether a locally designed incentive spirometry will improve peak expiratory flow rate (PEFR) of teenage SCA patients. Forty-nine SCA teenagers were randomized into either the SCA spirometry or the SCA control groups, which had 24 and 25 patients respectively. They were initially compared with 25 matched non-SCA teenagers. The SCA spirometry group went through a six-week, thrice-daily local incentive spirometry while the control did not go through the exercise. The PEFR of the SCA spirometry group improved significantly (p = 0.001) between the third and sixth week (211.04 ± 55.67 to 292.08 ± 40.86 litres/min) unlike that of the SCA control group (p = 0.605). At six weeks, PEFR of the SCA spirometry group improved significantly (t=0.624, p=0.003) over that of the SCA control group. However, the improved PEFR of the SCA spirometry group did not match that of their non-SCA counterparts. Locally designed incentive spirometry improved PEFR of the SCA teenagers significantly in six weeks of spirometry exercise. Routine improvement in PEFR of SCA patients with the aid of incentive spirometry should be encouraged to improve lung function.

Design it yourself (DIY): in-house instructional design for online pharmacology.

PubMed

Loftus, Jay; Stavraky, Tom; Urquhart, Bradley L

2014-12-01

Demand for e-learning courses has risen dramatically placing pressure on institutions to offer more online courses. Third party vendors now offer courses that can be embedded directly into learning management systems. When transitioning from in-class to e-learning formats, instructors must decide whether to use commercially available courses or design in-house. The objective of this study was to evaluate our transition from delivering introductory pharmacology via a purchased e-pack to an in-house designed course. A team that included an instructional designer, an education specialist and a content expert created an online course in pharmacology. Merrill's first principles of instruction were used as a guide for the design of our online course. Where appropriate, multiple forms of media were introduced to reinforce concepts. We compared grades and design strategy from a previous iteration that was delivered using a commercially available e-pack. A cost analysis was conducted to determine the institutional setup and maintenance costs of in-house course design. The mean final grade from the in-house designed course was 81.9 (0.5) % compared to 76.4 (0.5) % for the e-pack course (P < 0.001). Course evaluations were significantly improved for the in-house course compared to the e-pack. Cost-analysis demonstrated that designing a course in-house has a high initial cost ($111,180.57) but can be maintained with minimal institutional cost ($500) in future offerings. Our results demonstrate that effective courses can be designed in-house and this should be a viable option for institutions that have appropriate resources to support instructional design.

Probabilistic Analysis of Gas Turbine Field Performance

NASA Technical Reports Server (NTRS)

Gorla, Rama S. R.; Pai, Shantaram S.; Rusick, Jeffrey J.

2002-01-01

A gas turbine thermodynamic cycle was computationally simulated and probabilistically evaluated in view of the several uncertainties in the performance parameters, which are indices of gas turbine health. Cumulative distribution functions and sensitivity factors were computed for the overall thermal efficiency and net specific power output due to the thermodynamic random variables. These results can be used to quickly identify the most critical design variables in order to optimize the design, enhance performance, increase system availability and make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in the gas turbine health determination and to the identification of both the most critical measurements and parameters. Probabilistic analysis aims at unifying and improving the control and health monitoring of gas turbine aero-engines by increasing the quality and quantity of information available about the engine's health and performance.

Design and Implementation of a Telecardiology System for Mobile Devices.

PubMed

Cinaglia, Pietro; Tradigo, Giuseppe; Guzzi, Pietro H; Veltri, Pierangelo

2015-09-01

This paper presents the design and implementation of a system for digital telecardiology on mobile devices called Remote Cardio Consultation (RCC). Using RCC may improve first intervention procedures in case of heart attack. In fact, it allows physicians to remotely consult ECG signals from a mobile device or smartphone by using a so-called app. The remote consultation is implemented by a server application collecting physician availability to answer upon client support requests. The app can be used by first intervention clinicians and allows reducing delays and decision errors in emergency interventions. Thus, best decision, certified and supported by cardiologists, can be obtained in case of heart attacks and first interventions even by base medical doctors able to produce and send an ECG. RCC tests have been performed, and the prototype is freely available as a service for testing.

Study and review of permanent magnets for electric vehicle propulsion motors

NASA Technical Reports Server (NTRS)

Strnat, K. J.

1983-01-01

A study of permanent magnets (PM) was performed in support of the DOE/NASA electric and hybrid vehicle program. PM requirements for electric propulsion motors are analyzed, design principles and relevant properties of magnets are discussed. Available PM types are reviewed. For the needed high-grade magnets, design data, commercial varieties and sources are tabulated, based on a survey of vendors. Economic factors such as raw material availability, production capability and cost are analyzed, especially for cobalt and the rare earths. Extruded Mn-Al-C magnets from Japan were experimentally characterized. Dynamic magnetic data for the range -50 deg to +150 deg C and some mechanical properties are reported. The state of development of the important PM material families is reviewed. Feasible improvements or new developments of magnets for electric vehicle motors are identified.

Mainstreaming Climate Change: Recent and Ongoing Efforts to Understand, Improve, and Expand Consideration of Climate Change in Federal Water Resources Planning

NASA Astrophysics Data System (ADS)

Ferguson, I. M.; McGuire, M.; Broman, D.; Gangopadhyay, S.

2017-12-01

The Bureau of Reclamation is a Federal agency tasked with developing and managing water supply and hydropower projects in the Western U.S. Climate and hydrologic variability and change significantly impact management actions and outcomes across Reclamation's programs and initiatives, including water resource planning and operations, infrastructure design and maintenance, hydropower generation, and ecosystem restoration, among others. Planning, design, and implementation of these programs therefore requires consideration of future climate and hydrologic conditions will impact program objectives. Over the past decade, Reclamation and other Federal agencies have adopted new guidelines, directives, and mandates that require consideration of climate change in water resources planning and decision making. Meanwhile, the scientific community has developed a large number of climate projections, along with an array of models, methods, and tools to facilitate consideration of climate projections in planning and decision making. However, water resources engineers, planners, and decision makers continue to face challenges regarding how best to use the available data and tools to support major decisions, including decisions regarding infrastructure investments and long-term operating criteria. This presentation will discuss recent and ongoing research towards understanding, improving, and expanding consideration of climate projections and related uncertainties in Federal water resources planning and decision making. These research efforts address a variety of challenges, including: How to choose between available climate projection datasets and related methods, models, and tools—many of which are considered experimental or research tools? How to select an appropriate decision framework when design or operating alternatives may differ between climate scenarios? How to effectively communicate results of a climate impacts analysis to decision makers? And, how to improve robustness and resilience of water resources systems in the face of significant uncertainty? Discussion will focus on the intersection between technical challenges and decision making paradigms and the need for improved scientist-decision maker engagement through the lens of this Federal water management agency.

Building Empathy through Identification and Expression of Emotions: A Review of Interactive Tools for Children with Social Deficits

ERIC Educational Resources Information Center

Maynard, Angelina S.; Monk, Jessica D.; Booker, Kimberly Wilson

2011-01-01

This article is a review of available interactive aids designed to enhance the identification and expression of feelings in children. These skills are part of the overall development of empathy. The development of empathy, in turn, is crucial for social competence, social relatedness, and prosocial behavior. Improving these skills is likely to…

The Availability of Vocal Training for Improvement of Accent and Articulation Defects in Speech Education

ERIC Educational Resources Information Center

Aycan, Kivanc; Cimen, Gul; Yerer, M. Betul

2012-01-01

This study is designed to test the use of vocal training for articulation and accent defects which might be an important trouble while Turkish speaking. For this reason vocal training has been performed on a group of students selected randomly form the Erciyes University Turkish teaching profession 3rd class and the difference before and after…

Improving Accessibility for Seniors in a Life-Long Learning Network: A Usability Study of Learning Websites

ERIC Educational Resources Information Center

Gu, Xiaoqing; Ding, Rui; Fu, Shirong

2011-01-01

Senior citizens are comparatively vulnerable in accessing learning opportunities offered on the Internet due to usability problems in current web design. In an effort to build a senior-friendly learning web as a part of the Life-long Learning Network in Shanghai, usability studies of two websites currently available to Shanghai senior citizens…

E-Books from MyiLibrary at the University of Worcester: A Case Study

ERIC Educational Resources Information Center

Taylor, Alison

2007-01-01

Purpose: The purpose of this paper is to describe how an e-books project was set up at the University of Worcester Information and Learning Services with the aim of improving user access to the range of textbook materials available. Design/methodology/approach: Details of the background and circumstances of the University and the effect of these…

Improving wilderness stewardship through searchable databases of U.S. legislative history and legislated special provisions

Treesearch

David R. Craig; Peter Landres; Laurie Yung

2010-01-01

The online resource Wilderness.net currently provides quick access to the text of every public law designating wilderness in the U.S. National Wilderness Preservation System (NWPS). This article describes two new searchable databases recently completed and added to the information available on Wilderness.net to help wilderness managers and others understand and...

Digital Media and Data: Using and Designing Technologies to Support Learning in Practice

ERIC Educational Resources Information Center

Wardrip, Peter Samuelson; Shapiro, R. Benjamin

2016-01-01

The use of data to improve learning, instruction and student achievement has been a popular educational intervention in countries across the globe. Yet, with all the available data generated by standardized tests or through the course of instruction, systematic use of data as a lever for school change still remains elusive. This article is an…

The Impact of a Professional Development Program on Teachers' Mathematical Knowledge for Teaching, Instruction, and Student Achievement

ERIC Educational Resources Information Center

Jacob, Robin; Hill, Heather; Corey, Doug

2017-01-01

In this paper, we describe findings from a three-year evaluation of a well-developed mathematics professional development program that is commercially available on a wide scale. The professional development is designed to improve teachers' mathematical knowledge for teaching and to enable them to elicit more student thinking and reasoning during…

How School Facilities Managers and Business Officials Are Reducing Operating Costs and Saving Money. Energy-Smart Building Choices.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC.

This guide addresses contributions that school facility administrators and business officials can make in an effort to reduce operating costs and free up money for capital improvements. The guide explores opportunities available to utilize energy-saving strategies at any stage in a building's life, from its initial design phase through renovation.…

State Early Childhood Advisory Councils: An Overview of Implementation across the States. Issue Brief

ERIC Educational Resources Information Center

NGA Center for Best Practices, 2011

2011-01-01

Nearly all governors have designated a state early childhood advisory council to advise policymakers in the state on how to best meet the needs of children from birth to school entry. Early childhood advisory councils in the states vary in their structure and scope, but all of them provide recommendations on improving the quality, availability,…

School Counseling Intervention Research on College Readiness, College Access, and Postsecondary Success: A 10-Year Content Analysis of Peer-Reviewed Research

ERIC Educational Resources Information Center

McMahon, George; Griffith, Catherine; Mariani, Melissa; Zyromski, Brett

2017-01-01

Recent demands from educators and policymakers require school counselors to ensure that students are college and career ready. In this 10-year content analysis of peer-reviewed research, investigators sought to review and describe the available intervention research designed to improve post-secondary success. Ten (n = 10) articles published…

Free acid gel form of β-hydroxy-β-methylbutyrate (HMB) improves HMB clearance from plasma in human subjects compared with the calcium HMB salt.

PubMed

Fuller, John C; Sharp, Rick L; Angus, Hector F; Baier, Shawn M; Rathmacher, John A

2011-02-01

The leucine metabolite, β-hydroxy-β-methylbutyrate (HMB), is a nutritional supplement that increases lean muscle and strength with exercise and in disease states. HMB is presently available as the Ca salt (CaHMB). The present study was designed to examine whether HMB in free acid gel form will improve HMB availability to tissues. Two studies were conducted and in each study four males and four females were given three treatments in a randomised, cross-over design. Treatments were CaHMB (gelatin capsule, 1 g), equivalent HMB free acid gel swallowed (FASW) and free acid gel held sublingual for 15 s then swallowed (FASL). Plasma HMB was measured for 3 h following treatment in study 1 and 24 h with urine collection in study 2. In both the studies, the times to peak plasma HMB were 128 (sem 11), 38 (sem 4) and 38 (sem 1) min (P < 0·0001) for CaHMB, FASW and FASL, respectively. The peak concentrations were 131 (sem 6), 249 (sem 14) and 239 (sem 14) μmol/l (P < 0·0001) for CaHMB, FASW and FASL, respectively. The areas under the curve were almost double for FASW and FASL (P < 0·0001). Daily urinary HMB excretion was not significantly increased resulting in more HMB retained (P < 0·003) with FASW and FASL. Half-lives were 3·17 (sem 0·22), 2·50 (sem 0·13) and 2·51 (sem 0·14) h for CaHMB, FASW and FASL, respectively (P < 0·004). Free acid gel resulted in quicker and greater plasma concentrations (+185%) and improved clearance (+25%) of HMB from plasma. In conclusion, HMB free acid gel could improve HMB availability and efficacy to tissues in health and disease.

Accessibility of insulin pumps for blind and visually impaired people.

PubMed

Uslan, Mark M; Burton, Darren M; Chertow, Bruce S; Collins, Ronda

2004-10-01

Continuous subcutaneous insulin infusion using an insulin pump (IP) more closely mimics the normal pancreas than multiple insulin injections. It is an effective, and often a preferred, means of maintaining normal blood glucose levels, but IPs were not designed to be fully accessible to blind or visually impaired people. This study will identify accessibility issues related to the design of IPs and focus on the key improvements required in the user interface to provide access for people who are blind or visually impaired. IPs that are commercially available were evaluated, and features and functions such as operating procedures, user interface design, and user manuals were tabulated and analyzed. Potential failures and design priorities were identified through a Failure Modes and Effects Analysis (FMEA). Although the IPs do provide some limited audio output, in general, it was found to be of minimal use to people who are blind or visually impaired. None of the IPs uses high-contrast displays with consistently large fonts preferred by people who are visually impaired. User manuals were also found to be of minimal use. Results of the FMEA emphasize the need to focus design improvements on communicating and verifying information so that errors and failures can be detected and corrected. The most important recommendation for future IP development is speech output capability, which, more than any other improvement, would break down accessibility barriers and allow blind and visually impaired people to take advantage of the benefits of IP technology.

Improved Lunar Lander Handling Qualities Through Control Response Type and Display Enhancements

NASA Technical Reports Server (NTRS)

Mueller, Eric Richard; Bilimoria, Karl D.; Frost, Chad Ritchie

2010-01-01

A piloted simulation that studied the handling qualities for a precision lunar landing task from final approach to touchdown is presented. A vehicle model based on NASA's Altair Lunar Lander was used to explore the design space around the nominal vehicle configuration to determine which combination of factors provides satisfactory pilot-vehicle performance and workload; details of the control and propulsion systems not available for that vehicle were derived from Apollo Lunar Module data. The experiment was conducted on a large motion base simulator. Eight Space Shuttle and Apollo pilot astronauts and three NASA test pilots served as evaluation pilots, providing Cooper-Harper ratings, Task Load Index ratings and qualitative comments. Each pilot flew seven combinations of control response types and three sets of displays, including two varieties of guidance and a nonguided approach. The response types included Rate Command with Attitude Hold, which was used in the original Apollo Moon landings, a Velocity Increment Command response type designed for up-and-away flight, three response types designed specifically for the vertical descent portion of the trajectory, and combinations of these. It was found that Velocity Increment Command significantly improved handling qualities when compared with the baseline Apollo design, receiving predominantly Level 1 ratings. This response type could be flown with or without explicit guidance cues, something that was very difficult with the baseline design, and resulted in approximately equivalent touchdown accuracies and propellant burn as the baseline response type. The response types designed to be used exclusively in the vertical descent portion of the trajectory did not improve handling qualities.

Speech emotion recognition methods: A literature review

NASA Astrophysics Data System (ADS)

Basharirad, Babak; Moradhaseli, Mohammadreza

2017-10-01

Recently, attention of the emotional speech signals research has been boosted in human machine interfaces due to availability of high computation capability. There are many systems proposed in the literature to identify the emotional state through speech. Selection of suitable feature sets, design of a proper classifications methods and prepare an appropriate dataset are the main key issues of speech emotion recognition systems. This paper critically analyzed the current available approaches of speech emotion recognition methods based on the three evaluating parameters (feature set, classification of features, accurately usage). In addition, this paper also evaluates the performance and limitations of available methods. Furthermore, it highlights the current promising direction for improvement of speech emotion recognition systems.

Research on design feasibility of high-power light-weight dc-to-dc converters for space power applications

NASA Technical Reports Server (NTRS)

Wilson, T. G.

1981-01-01

Utilizing knowledge gained from past experience with experimental current-or-voltage step-up dc-to-dc converter power stages operating at output powers up to and in excess of 2 kW, a new experimental current-or-voltage step-up power stage using paralleled bipolar junction transistors (BJTs) as the controlled power switch, was constructed during the current reporting period. The major motivation behind the construction of this new experimental power stage was to improve the circuit layout so as to reduce the effects of stray circuit parasitic inductances resulting from excess circuit lead lengths and circuit loops, and to take advantage of the layout improvements which could be made when some recently-available power components, particularly power diodes and polypropylene filter capacitors, were incorporated into the design.

Neurosecurity: security and privacy for neural devices.

PubMed

Denning, Tamara; Matsuoka, Yoky; Kohno, Tadayoshi

2009-07-01

An increasing number of neural implantable devices will become available in the near future due to advances in neural engineering. This discipline holds the potential to improve many patients' lives dramatically by offering improved-and in some cases entirely new-forms of rehabilitation for conditions ranging from missing limbs to degenerative cognitive diseases. The use of standard engineering practices, medical trials, and neuroethical evaluations during the design process can create systems that are safe and that follow ethical guidelines; unfortunately, none of these disciplines currently ensure that neural devices are robust against adversarial entities trying to exploit these devices to alter, block, or eavesdrop on neural signals. The authors define "neurosecurity"-a version of computer science security principles and methods applied to neural engineering-and discuss why neurosecurity should be a critical consideration in the design of future neural devices.

Low thrust chemical rocket technology

NASA Technical Reports Server (NTRS)

Schneider, Steven J.

1992-01-01

An on-going technology program to improve the performance of low thrust chemical rockets for spacecraft on-board propulsion applications is reviewed. Improved performance and lifetime is sought by the development of new predictive tools to understand the combustion and flow physics, introduction of high temperature materials and improved component designs to optimize performance, and use of higher performance propellants. Improved predictive technology is sought through the comparison of both local and global predictions with experimental data. Predictions are based on both the RPLUS Navier-Stokes code with finite rate kinetics and the JANNAF methodology. Data were obtained with laser-based diagnostics along with global performance measurements. Results indicate that the modeling of the injector and the combustion process needs improvement in these codes and flow visualization with a technique such as 2-D laser induced fluorescence (LIF) would aid in resolving issues of flow symmetry and shear layer combustion processes. High temperature material fabrication processes are under development and small rockets are being designed, fabricated, and tested using these new materials. Rhenium coated with iridium for oxidation protection was produced by the Chemical Vapor Deposition (CVD) process and enabled an 800 K increase in rocket operating temperature. Performance gains with this material in rockets using Earth storable propellants (nitrogen tetroxide and monomethylhydrazine or hydrazine) were obtained through component redesign to eliminate fuel film cooling and its associated combustion inefficiency while managing head end thermal soakback. Material interdiffusion and oxidation characteristics indicated that the requisite lifetimes of tens of hours were available for thruster applications. Rockets were designed, fabricated, and tested with thrusts of 22, 62, 440 and 550 N. Performance improvements of 10 to 20 seconds specific impulse were demonstrated. Higher performance propellants were evaluated: Space storable propellants, including liquid oxygen (LOX) as the oxidizer with nitrogen hydrides or hydrocarbon as fuels. Specifically, a LOX/hydrazine engine was designed, fabricated, and shown to have a 95 pct theoretical c-star which translates into a projected vacuum specific impulse of 345 seconds at an area ratio of 204:1. Further performance improvment can be obtained by the use of LOX/hydrogen propellants, especially for manned spacecraft applications, and specific designs must be developed and advanced through flight qualification.

Set membership experimental design for biological systems.

PubMed

Marvel, Skylar W; Williams, Cranos M

2012-03-21

Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models.

Set membership experimental design for biological systems

PubMed Central

2012-01-01

Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models. PMID:22436240

Leveraging Health Information Exchange to Improve Population Health Reporting Processes: Lessons in Using a Collaborative-Participatory Design Process

PubMed Central

Revere, Debra; Dixon, Brian E.; Hills, Rebecca; Williams, Jennifer L.; Grannis, Shaun J.

2014-01-01

Introduction: Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public’s health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Background: Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Methods: Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. Findings: A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. Discussion: In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design process provided new insights into public health workflow and allowed the team to quickly triage user requests while managing user expectations within the realm of engineering possibilities. Conclusion: Engaging public health, engineering staff, and investigators in a shared codesigning process ensured that the new forms will not only meet real-life needs but will also support development of a product that will be adopted and, ultimately, improve communicable and infectious disease reporting by clinicians to public health. PMID:25848615

Design and Evaluation of a Stand-Up Motorized Prone Cart

PubMed Central

Harrow, Jeffrey J; Malassigné, Pascal; Nelson, Audrey L; Jensen, Robert P; Amato, Margaret; Palacios, Polly L

2007-01-01

Background/Objective: Prone carts are used for mobility by individuals with spinal cord injury in whom seated mobility (wheelchair) is contraindicated due to ischial or sacral pressure ulcers. Currently available prone carts are uncomfortable, subjecting the user to neck and shoulder strain, and make social interaction and performing activities of daily living difficult. A better design of prone carts is needed. In addition, standing devices have shown some medical benefits. The objective was to design and evaluate an improved prone cart that facilitates standing. Design: Engineering development project with user feedback through questionnaire. Users selected by convenience sampling. Methods: A marketing survey was performed of nurse managers of spinal cord injury units. Then 2 prototype carts were designed and built. These carts are able to tilt up to 45° and have a joystick-controlled motor for propulsion and other design features, including a workspace storage shelf and rearview mirrors. The carts were evaluated by both patients and caregivers at 2 Veteran's Administration hospitals. Outcome Measures: Questionnaire of subjects, both patients and caregivers, who used the cart. Findings: Both patients and caregivers liked the carts and the ability to assume a nonhorizontal body angle. The major complaint about the cart was that it seemed too long when it came to making turns. Conclusion: This prone cart design is an improvement over the standard, flat variety. However, further design changes will be necessary. This study provided valuable information that will be useful in the next-generation prone cart design project. PMID:17385270

An efficient liner cooling scheme for advanced small gas turbine combustors

NASA Technical Reports Server (NTRS)

Paskin, Marc D.; Mongia, Hukam C.; Acosta, Waldo A.

1993-01-01

A joint Army/NASA program was conducted to design, fabricate, and test an advanced, small gas turbine, reverse-flow combustor utilizing a compliant metal/ceramic (CMC) wall cooling concept. The objectives of this effort were to develop a design method (basic design data base and analysis) for the CMC cooling technique and then demonstrate its application to an advanced cycle, small, reverse-flow combustor with 3000 F burner outlet temperature. The CMC concept offers significant improvements in wall cooling effectiveness resulting in a large reduction in cooling air requirements. Therefore, more air is available for control of burner outlet temperature pattern in addition to the benefits of improved efficiency, reduced emissions, and lower smoke levels. The program was divided into four tasks. Task 1 defined component materials and localized design of the composite wall structure in conjunction with development of basic design models for the analysis of flow and heat transfer through the wall. Task 2 included implementation of the selected materials and validated design models during combustor preliminary design. Detail design of the selected combustor concept and its refinement with 3D aerothermal analysis were completed in Task 3. Task 4 covered detail drawings, process development and fabrication, and a series of burner rig tests. The purpose of this paper is to provide details of the investigation into the fundamental flow and heat transfer characteristics of the CMC wall structure as well as implementation of the fundamental analysis method for full-scale combustor design.

NREL Collaboration Breaks 1-Volt Barrier in CdTe Solar Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-05-01

NREL scientists have worked with Washington State University and the University of Tennessee to improve the maximum voltage available from CdTe solar cells. Changes in dopants, stoichiometry, interface design, and defect chemistry improved the CdTe conductivity and carrier lifetime by orders of magnitude, thus enabling CdTe solar cells with open-circuit voltages exceeding 1 volt for the first time. Values of current density and fill factor for CdTe solar cells are already at high levels, but sub-par voltages has been a barrier to improved efficiencies. With voltages pushed beyond 1 volt, CdTe cells have a path to produce electricity at costsmore » less than fossil fuels.« less

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

NASA Technical Reports Server (NTRS)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

Compound prism design principles, I

PubMed Central

Hagen, Nathan; Tkaczyk, Tomasz S.

2011-01-01

Prisms have been needlessly neglected as components used in modern optical design. In optical throughput, stray light, flexibility, and in their ability to be used in direct-view geometry, they excel over gratings. Here we show that even their well-known weak dispersion relative to gratings has been overrated by designing doublet and double Amici direct-vision compound prisms that have 14° and 23° of dispersion across the visible spectrum, equivalent to 800 and 1300 lines/mm gratings. By taking advantage of the multiple degrees of freedom available in a compound prism design, we also show prisms whose angular dispersion shows improved linearity in wavelength. In order to achieve these designs, we exploit the well-behaved nature of prism design space to write customized algorithms that optimize directly in the nonlinear design space. Using these algorithms, we showcase a number of prism designs that illustrate a performance and flexibility that goes beyond what has often been considered possible with prisms. PMID:22423145

DeMAID/GA USER'S GUIDE Design Manager's Aid for Intelligent Decomposition with a Genetic Algorithm

NASA Technical Reports Server (NTRS)

Rogers, James L.

1996-01-01

Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool that is available to aid in this decision making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial release of DEMAID in 1989, numerous enhancements have been added to aid the design manager in saving both cost and time in a design cycle. The key enhancement is a genetic algorithm (GA) and the enhanced version is called DeMAID/GA. The GA orders the sequence of design processes to minimize the cost and time to converge to a solution. These enhancements as well as the existing features of the original version of DEMAID are described. Two sample problems are used to show how these enhancements can be applied to improve the design cycle. This report serves as a user's guide for DeMAID/GA.

Air transportation energy efficiency - Alternatives and implications

NASA Technical Reports Server (NTRS)

Williams, L. J.

1976-01-01

Results from recent studies of air transportation energy efficiency alternatives are discussed, along with some of the implications of these alternatives. The fuel-saving alternatives considered include aircraft operation, aircraft modification, derivative aircraft, and new aircraft. In the near-term, energy efficiency improvements should be possible through small improvements in fuel-saving flight procedures, higher density seating, and higher load factors. Additional small near-term improvements could be obtained through aircraft modifications, such as the relatively inexpensive drag reduction modifications. Derivatives of existing aircraft could meet the requirements for new aircraft and provide energy improvements until advanced technology is available to justify the cost of a completely new design. In order to obtain significant improvements in energy efficiency, new aircraft must truly exploit advanced technology in such areas as aerodynamics, composite structures, active controls, and advanced propulsion.

CAD Integration : new optical design possibilities

NASA Astrophysics Data System (ADS)

Haumonte, Jean-Baptiste; Venturino, Jean-Claude

2005-09-01

The development of optical design and analysis tools in a CAD software can help to optimise the design, size and performance of tomorrow's consumer products. While optics was still held back by software limitations, CAD programs were moving forward in leaps and bounds, improving manufacturing technologies and making it possible to design and produce highly innovative and sophisticated products. The problem was that in the past, 'traditional' optical design programs were only able to simulate spherical and aspherical lenses, meaning that the optical designers were limited to designing systems which were a series of imperfect lenses, each one correcting the last. That is why OPTIS has created the first optical design program to be fully integrated into a CAD program. The technology is available from OPTIS in an integrated SOLIDWORKS or CATIA V5 version. Users of this software can reduce the number of lenses needed in a system. Designers will now have access to complex surfaces such as NURBS meaning they will now be able to define free shape progressive lenses and even improve on optical performances using fewer lenses. This revolutionary technology will allow mechanical designers to work on optical systems and to share information with optical designers for the first time. Previously not possible in a CAD program you may now determine all the optical performances of any optical system, providing first order and third order performances, sequential and non-sequential ray-tracing, wavefront surfaces, point spread function, MTF, spot-diagram, using real optical surfaces and guaranteeing the mechanical precision necessary for an optical system.

Rare lung disease research: strategies for improving identification and recruitment of research participants.

PubMed

Gupta, Samir; Bayoumi, Ahmed M; Faughnan, Marie E

2011-11-01

Research in rare lung diseases faces methodologic limitations by virtue of the small number of participants available to be studied. We explored several strategies that may improve researchers' ability to identify and recruit research participants with rare lung diseases. We provide an overview of strategies based on available evidence, previously used approaches, and reasoning. First, disease detection is generally poor and may be improved through strategies targeted at primary care practitioners or directly at patients, thus increasing the pool of patients available for research studies. Next, standardization of case definitions in rare lung diseases is often lacking, hindering research recruitment efforts because of confusion over appropriate recruitment criteria. Expert consensus statements can enhance both clinical care and research recruitment by standardizing definitions. Finally, recruitment strategies using rare lung disease registries, clinical research networks, novel Internet-based direct patient recruitment approaches, and patient organizations may facilitate recruitment of patients with rare lung diseases. In summary, although several strategies for improving the identification and recruitment of research participants with rare lung diseases have been proposed, published examples are few. Objective measurement and reporting of novel recruitment methods and collaboration among researchers facing the same limitations across various rare lung diseases are required. Advancements in this area are vital to the design and performance of much-needed robust clinical studies across the spectrum of rare lung diseases.

Model-driven approach to data collection and reporting for quality improvement.

PubMed

Curcin, Vasa; Woodcock, Thomas; Poots, Alan J; Majeed, Azeem; Bell, Derek

2014-12-01

Continuous data collection and analysis have been shown essential to achieving improvement in healthcare. However, the data required for local improvement initiatives are often not readily available from hospital Electronic Health Record (EHR) systems or not routinely collected. Furthermore, improvement teams are often restricted in time and funding thus requiring inexpensive and rapid tools to support their work. Hence, the informatics challenge in healthcare local improvement initiatives consists of providing a mechanism for rapid modelling of the local domain by non-informatics experts, including performance metric definitions, and grounded in established improvement techniques. We investigate the feasibility of a model-driven software approach to address this challenge, whereby an improvement model designed by a team is used to automatically generate required electronic data collection instruments and reporting tools. To that goal, we have designed a generic Improvement Data Model (IDM) to capture the data items and quality measures relevant to the project, and constructed Web Improvement Support in Healthcare (WISH), a prototype tool that takes user-generated IDM models and creates a data schema, data collection web interfaces, and a set of live reports, based on Statistical Process Control (SPC) for use by improvement teams. The software has been successfully used in over 50 improvement projects, with more than 700 users. We present in detail the experiences of one of those initiatives, Chronic Obstructive Pulmonary Disease project in Northwest London hospitals. The specific challenges of improvement in healthcare are analysed and the benefits and limitations of the approach are discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Modified Phasemeter for a Heterodyne Laser Interferometer

NASA Technical Reports Server (NTRS)

Loya, Frank M.

2010-01-01

Modifications have been made in the design of instruments of the type described in "Digital Averaging Phasemeter for Heterodyne Interferometry". A phasemeter of this type measures the difference between the phases of the unknown and reference heterodyne signals in a heterodyne laser interferometer. The phasemeter design lacked immunity to drift of the heterodyne frequency, was bandwidth-limited by computer bus architectures then in use, and was resolution-limited by the nature of field-programmable gate arrays (FPGAs) then available. The modifications have overcome these limitations and have afforded additional improvements in accuracy, speed, and modularity. The modifications are summarized.

A Boon for the Architect Engineer

NASA Technical Reports Server (NTRS)

1992-01-01

Langley Research Center's need for an improved construction specification system led to an automated system called SPECSINTACT. A catalog of specifications, the system enables designers to retrieve relevant sections from computer storage and modify them as needed. SPECSINTACT has also been adopted by government agencies. The system is an integral part of the Construction Criteria Base (CCB), a single disc containing design and construction information for 10 government agencies including the American Institute of Architects' MASTERSPEC. CCB employs CD- ROM technologies and is available from the National Institute of Building Sciences. Users report substantial savings in time and productivity.

MMP Inhibitors: Past, present and future.

PubMed

Cathcart, Jillian M; Cao, Jian

2015-06-01

  Development of inhibitors of matrix metalloproteinases (MMPs) has been fraught with challenges. Early compounds largely failed due to poor selectivity and bioavailability. Dose-limiting side effects, off-target interactions, and improperly designed clinical trials significantly impeded clinical success. As information becomes available and technology evolves, tools to combat these obstacles have been developed. Improved methods for high throughput screening and drug design have led to identification of compounds exhibiting high potency, binding affinity, and favorable pharmacokinetic profiles. Current research into MMP inhibitors employs innovative approaches for drug delivery methods and allosteric inhibitors. Such innovation is key for development of clinically successful compounds.

The challenge of designing a database for auditing surgical in-patients.

PubMed

Branday, J M; Crandon, I; Carpenter, R; Rhoden, A; Meeks-Aitken, N

1999-12-01

Surgical audit is imperative in modern practice, particularly in the developing world where resources are limited and efficient allocation important. The structure, process and outcome of surgical care can be determined for quality assurance or for research. Improved efficiency and reduction of morbidity and mortality are additional goals which may be accomplished. However, computerization, medical staff cooperation and the availability of dedicated staff are among the hurdles which may be encountered. We report the challenge of designing and establishing a database for auditing surgical inpatients in a developing country and the difficulties which were encountered.

Constructing an adaptive care model for the management of disease-related symptoms throughout the course of multiple sclerosis--performance improvement CME.

PubMed

Miller, Aaron E; Cohen, Bruce A; Krieger, Stephen C; Markowitz, Clyde E; Mattson, David H; Tselentis, Helen N

2014-01-01

Symptom management remains a challenging clinical aspect of MS. To design a performance improvement continuing medical education (PI CME) activity for better clinical management of multiple sclerosis (MS)-related depression, fatigue, mobility impairment/falls, and spasticity. Ten volunteer MS centers participated in a three-stage PI CME model: A) baseline assessment; B) practice improvement CME intervention; C) reassessment. Expert faculty developed performance measures and activity intervention tools. Designated MS center champions reviewed patient charts and entered data into an online database. Stage C data were collected eight weeks after implementation of the intervention and compared with Stage A baseline data to measure change in performance. Aggregate data from the 10 participating MS centers (405 patient charts) revealed performance improvements in the assessment of all four MS-related symptoms. Statistically significant improvements were found in the documented assessment of mobility impairment/falls (p=0.003) and spasticity (p<0.001). For documentation of care plans, statistically significant improvements were reported for fatigue (p=0.007) and mobility impairment/falls (p=0.040); non-significant changes were noted for depression and spasticity. Our PI CME interventions demonstrated performance improvement in the management of MS-related symptoms. This PI CME model (available at www.achlpicme.org/ms/toolkit) offers a new perspective on enhancing symptom management in patients with MS.

A video approach to interactive patient education.

PubMed

Maller, C E; Twitty, V J; Sauve, A

1997-04-01

A quality improvement model presents the stages of designing and producing a preoperative videotape for improved patient satisfaction outcomes. PACU nurses formed an interdisciplinary team of providers and patients to update an existing preoperative sound/slide program into video. Improved patient outcomes were reflected in greater availability, accessibility, and consistency of preoperative instruction. A videotape program for home viewing was instituted to reach out to the surgical patient population served by the Albuquerque Veterans Affairs Medical Center in New Mexico. A quality improvement storyboard approach to videotape production met Joint Commission on Accreditation of Health Care Organization (JCAHO) standards for interactive patient education at a recent JCAHO survey. Preliminary evaluative data from patients supports a growing appeal of videos to patients and family members as an additional preoperative teaching strategy for adult surgical patients.

Selecting a pharmacy layout design using a weighted scoring system.

PubMed

McDowell, Alissa L; Huang, Yu-Li

2012-05-01

A weighted scoring system was used to select a pharmacy layout redesign. Facilities layout design techniques were applied at a local hospital pharmacy using a step-by-step design process. The process involved observing and analyzing the current situation, observing the current available space, completing activity flow charts of the pharmacy processes, completing communication and material relationship charts to detail which areas in the pharmacy were related to one another and how they were related, researching applications in other pharmacies or in scholarly works that could be beneficial, numerically defining space requirements for areas within the pharmacy, measuring the available space within the pharmacy, developing a set of preliminary designs, and modifying preliminary designs so they were all acceptable to the pharmacy staff. To select a final layout that could be implemented in the pharmacy, those layouts were compared via a weighted scoring system. The weighted aspect further allowed additional emphasis on categories based on their effect on pharmacy performance. The results produced a beneficial layout design as determined through simulated models of the pharmacy operation that more effectively allocated and strategically located space to improve transportation distances and materials handling, employee utilization, and ergonomics. Facilities layout designs for a hospital pharmacy were evaluated using a weighted scoring system to identify a design that was superior to both the current layout and alternative layouts in terms of feasibility, cost, patient safety, employee safety, flexibility, robustness, transportation distance, employee utilization, objective adherence, maintainability, usability, and environmental impact.

Multidisciplinary Design Optimization (MDO) Methods: Their Synergy with Computer Technology in Design Process

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw

1998-01-01

The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate a radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimization (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behavior by interaction of a large number of very simple models may be an inspiration for the above algorithms, the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should be now, even though the widespread availability of massively parallel processing is still a few years away.

Reweighting anthropometric data using a nearest neighbour approach.

PubMed

Kumar, Kannan Anil; Parkinson, Matthew B

2018-07-01

When designing products and environments, detailed data on body size and shape are seldom available for the specific user population. One way to mitigate this issue is to reweight available data such that they provide an accurate estimate of the target population of interest. This is done by assigning a statistical weight to each individual in the reference data, increasing or decreasing their influence on statistical models of the whole. This paper presents a new approach to reweighting these data. Instead of stratified sampling, the proposed method uses a clustering algorithm to identify relationships between the detailed and reference populations using their height, mass, and body mass index (BMI). The newly weighted data are shown to provide more accurate estimates than traditional approaches. The improved accuracy that accompanies this method provides designers with an alternative to data synthesis techniques as they seek appropriate data to guide their design practice.Practitioner Summary: Design practice is best guided by data on body size and shape that accurately represents the target user population. This research presents an alternative to data synthesis (e.g. regression or proportionality constants) for adapting data from one population for use in modelling another.

Multidisciplinary Design Optimisation (MDO) Methods: Their Synergy with Computer Technology in the Design Process

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw

1999-01-01

The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate. A radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimisation (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behaviour by interaction of a large number of very simple models may be an inspiration for the above algorithms; the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should begin now, even though the widespread availability of massively parallel processing is still a few years away.

Improving the evidence base for better comparative effectiveness research.

PubMed

Brophy, James M

2015-09-01

The last 20 years has documented that the evidence base for informed clinical decision-making is often suboptimal. It is hoped that high-quality comparative effectiveness research may fill these knowledge gaps. Implicit in these changing paradigms is the underlying assumption that the published evidence, when available, is valid. It is posited here that this assumption is sometimes questionable. However, several recent methods that may improve the design and analysis of comparative effectiveness research have appeared and are discussed here. Examples from the cardiology literature are provided, but it is believed the highlighted principles are applicable to other branches of medicine.

Adaptive Wing Camber Optimization: A Periodic Perturbation Approach

NASA Technical Reports Server (NTRS)

Espana, Martin; Gilyard, Glenn

1994-01-01

Available redundancy among aircraft control surfaces allows for effective wing camber modifications. As shown in the past, this fact can be used to improve aircraft performance. To date, however, algorithm developments for in-flight camber optimization have been limited. This paper presents a perturbational approach for cruise optimization through in-flight camber adaptation. The method uses, as a performance index, an indirect measurement of the instantaneous net thrust. As such, the actual performance improvement comes from the integrated effects of airframe and engine. The algorithm, whose design and robustness properties are discussed, is demonstrated on the NASA Dryden B-720 flight simulator.

Early Treatment in Shock. Addendum

DTIC Science & Technology

2012-08-01

from gardenia root (Gardenia jasminoides Ellis). It is com- monly sold in the United States as an herbal supplement . In terms of crocetin’s fundamental...but results of 14 the available literature collectively allow the conclusion that L-arginine supplementation 15 can be beneficial in ameliorating the...were designed to test two 19 hypotheses. First, L-arginine supplementation during resuscitation will improve survival 20 from lethal hemorrhagic

Preventive oral health intervention for pediatricians.

PubMed

2008-12-01

This policy is a compilation of current concepts and scientific evidence required to understand and implement practice-based preventive oral health programs designed to improve oral health outcomes for all children and especially children at significant risk of dental decay. In addition, it reviews cariology and caries risk assessment and defines, through available evidence, appropriate recommendations for preventive oral health intervention by primary care pediatric practitioners.

The Role of WhatsApp in Teaching Vocabulary to Iranian EFL Learners at Junior High School

ERIC Educational Resources Information Center

Jafari, Sanaz; Chalak, Azizeh

2016-01-01

The availability and the use of mobile messaging applications are increasingly widespread among the new generation of students in Iran. The present study aimed to investigate the role of WhatsApp in the vocabulary learning improvement of Iranian junior high school EFL students. Using a mixed method design, a group of 60 students including 30 male…

Optimize out-of-core thermionic energy conversion for nuclear electric propulsion

NASA Technical Reports Server (NTRS)

Morris, J. F.

1977-01-01

Current designs for out of core thermionic energy conversion (TEC) to power nuclear electric propulsion (NEP) were evaluated. Approaches to improve out of core TEC are emphasized and probabilities for success are indicated. TEC gains are available with higher emitter temperatures and greater power densities. Good potentialities for accommodating external high temperature, high power density TEC with heat pipe cooled reactors exist.

Invited Article: Threats to physician autonomy in a performance-based reimbursement system.

PubMed

Larriviere, Daniel G; Bernat, James L

2008-06-10

Physician autonomy is currently threatened by the external application of pay for performance standards and required conformity to practice guidelines. This phenomenon is being driven by concerns over the economic viability of increasing per capita health care expenditures without a concomitant rise in favorable health outcomes and by the unjustified marked variations among physicians' practice patterns. Proponents contend that altering the reimbursement system to encourage physicians to make choices based upon the best available evidence would be one way to ensure better outcomes per health care dollar spent. Although physician autonomy is most easily justified when decisions are made by appealing to the best available evidence, incentivizing decision-making risks sacrificing physician autonomy to political and social forces if the limitations of evidence-based medicine are not respected. Any reimbursement system designed to encourage physicians to utilize the best available evidence by providing financial incentives must recognize physicians who try to play to the numbers as well as physicians who refuse to follow the best available evidence if doing so would conflict with good medicine or patient preferences. By designing, promulgating, and updating evidence-based clinical practice guidelines, medical specialty societies can limit threats to physician autonomy while improving medical practice.

Ergonomics Perspective in Agricultural Research: A User-Centred Approach Using CAD and Digital Human Modeling (DHM) Technologies

NASA Astrophysics Data System (ADS)

Patel, Thaneswer; Sanjog, J.; Karmakar, Sougata

2016-09-01

Computer-aided Design (CAD) and Digital Human Modeling (DHM) (specialized CAD software for virtual human representation) technologies endow unique opportunities to incorporate human factors pro-actively in design development. Challenges of enhancing agricultural productivity through improvement of agricultural tools/machineries and better human-machine compatibility can be ensured by adoption of these modern technologies. Objectives of present work are to provide the detailed scenario of CAD and DHM applications in agricultural sector; and finding out means for wide adoption of these technologies for design and development of cost-effective, user-friendly, efficient and safe agricultural tools/equipment and operator's workplace. Extensive literature review has been conducted for systematic segregation and representation of available information towards drawing inferences. Although applications of various CAD software have momentum in agricultural research particularly for design and manufacturing of agricultural equipment/machinery, use of DHM is still at its infancy in this sector. Current review discusses about reasons of less adoption of these technologies in agricultural sector and steps to be taken for their wide adoption. It also suggests possible future research directions to come up with better ergonomic design strategies for improvement of agricultural equipment/machines and workstations through application of CAD and DHM.

[Stent-assisted recanalization of femoropopliteal arterial occlusive disease. Influence of stent design on patency rates].

PubMed

Treitl, M; Reiser, M F; Treitl, K M

2016-03-01

Despite enormous technical progress the results of endovascular treatment of the femoropopliteal vasculature are unsatisfactory and its role is still controversially discussed. In the past decade numerous new stent designs have come onto the market but it is unclear whether they have benefits with respect to patency rates. Comparison of published data on patency rates and target lesion revascularization rates after use of different stent designs in the femoropopliteal vasculature. Analysis of 25 published studies and registries from 2006 to 2015 for classical open-cell stents, interwoven stents and partially or fully covered stents. The published data are heterogeneous and comparative studies for different stent designs are completely missing. Over the past decade the patency rates after femoropopliteal stenting could be improved. According to available data stenting of short lesions < 5 cm does not show any benefit compared to isolated balloon angioplasty. Primary stenting is now recommended for intermediate and longer lesions > 6.4 cm. Due to the heterogeneity of published data a clear benefit for a specific stent design is not obvious; however, data for interwoven stents are promising and show a tendency towards improved patency, at least for certain lesions. Randomized controlled comparative trials are needed to confirm this result.

[Research progress of probe design software of oligonucleotide microarrays].

PubMed

Chen, Xi; Wu, Zaoquan; Liu, Zhengchun

2014-02-01

DNA microarray has become an essential medical genetic diagnostic tool for its high-throughput, miniaturization and automation. The design and selection of oligonucleotide probes are critical for preparing gene chips with high quality. Several sets of probe design software have been developed and are available to perform this work now. Every set of the software aims to different target sequences and shows different advantages and limitations. In this article, the research and development of these sets of software are reviewed in line with three main criteria, including specificity, sensitivity and melting temperature (Tm). In addition, based on the experimental results from literatures, these sets of software are classified according to their applications. This review will be helpful for users to choose an appropriate probe-design software. It will also reduce the costs of microarrays, improve the application efficiency of microarrays, and promote both the research and development (R&D) and commercialization of high-performance probe design software.

Improved variance estimation of classification performance via reduction of bias caused by small sample size.

PubMed

Wickenberg-Bolin, Ulrika; Göransson, Hanna; Fryknäs, Mårten; Gustafsson, Mats G; Isaksson, Anders

2006-03-13

Supervised learning for classification of cancer employs a set of design examples to learn how to discriminate between tumors. In practice it is crucial to confirm that the classifier is robust with good generalization performance to new examples, or at least that it performs better than random guessing. A suggested alternative is to obtain a confidence interval of the error rate using repeated design and test sets selected from available examples. However, it is known that even in the ideal situation of repeated designs and tests with completely novel samples in each cycle, a small test set size leads to a large bias in the estimate of the true variance between design sets. Therefore different methods for small sample performance estimation such as a recently proposed procedure called Repeated Random Sampling (RSS) is also expected to result in heavily biased estimates, which in turn translates into biased confidence intervals. Here we explore such biases and develop a refined algorithm called Repeated Independent Design and Test (RIDT). Our simulations reveal that repeated designs and tests based on resampling in a fixed bag of samples yield a biased variance estimate. We also demonstrate that it is possible to obtain an improved variance estimate by means of a procedure that explicitly models how this bias depends on the number of samples used for testing. For the special case of repeated designs and tests using new samples for each design and test, we present an exact analytical expression for how the expected value of the bias decreases with the size of the test set. We show that via modeling and subsequent reduction of the small sample bias, it is possible to obtain an improved estimate of the variance of classifier performance between design sets. However, the uncertainty of the variance estimate is large in the simulations performed indicating that the method in its present form cannot be directly applied to small data sets.

CONDUIT: A New Multidisciplinary Integration Environment for Flight Control Development

NASA Technical Reports Server (NTRS)

Tischler, Mark B.; Colbourne, Jason D.; Morel, Mark R.; Biezad, Daniel J.; Levine, William S.; Moldoveanu, Veronica

1997-01-01

A state-of-the-art computational facility for aircraft flight control design, evaluation, and integration called CONDUIT (Control Designer's Unified Interface) has been developed. This paper describes the CONDUIT tool and case study applications to complex rotary- and fixed-wing fly-by-wire flight control problems. Control system analysis and design optimization methods are presented, including definition of design specifications and system models within CONDUIT, and the multi-objective function optimization (CONSOL-OPTCAD) used to tune the selected design parameters. Design examples are based on flight test programs for which extensive data are available for validation. CONDUIT is used to analyze baseline control laws against pertinent military handling qualities and control system specifications. In both case studies, CONDUIT successfully exploits trade-offs between forward loop and feedback dynamics to significantly improve the expected handling, qualities and minimize the required actuator authority. The CONDUIT system provides a new environment for integrated control system analysis and design, and has potential for significantly reducing the time and cost of control system flight test optimization.

Participatory design of a music aural rehabilitation programme.

PubMed

van Besouw, Rachel M; Oliver, Benjamin R; Hodkinson, Sarah M; Polfreman, Richard; Grasmeder, Mary L

2015-09-01

Many cochlear implant (CI) users wish to enjoy music but are dissatisfied by its quality as perceived through their implant. Although there is evidence to suggest that training can improve CI users' perception and appraisal of music, availability of interactive music-based aural rehabilitation for adults is limited. In response to this need, an 'Interactive Music Awareness Programme' (IMAP) was developed with and for adult CI users. An iterative design and evaluation approach was used. The process began with identification of user needs through consultations, followed by use of mock-up applications in workshops. Feedback from these were used to develop the prototype IMAP; a programme of 24 interactive sessions, enabling users to create and manipulate music. The prototype IMAP was subsequently evaluated in a home trial with 16 adult CI users over a period of 12 weeks. Overall ratings for the prototype IMAP were positive and indicated that it met users' needs. Quantitative and qualitative feedback on the sessions and software in the prototype IMAP were used to identify aspects of the programme that worked well and aspects that required improvement. The IMAP was further developed in response to users' feedback and is freely available online. The participatory design approach used in developing the IMAP was fundamental in ensuring its relevance, and regular feedback from end users in each phase of development proved valuable for early identification of issues. Observations and feedback from end users supported a holistic approach to music aural rehabilitation.

Large scale rigidity-based flexibility analysis of biomolecules

PubMed Central

Streinu, Ileana

2016-01-01

KINematics And RIgidity (KINARI) is an on-going project for in silico flexibility analysis of proteins. The new version of the software, Kinari-2, extends the functionality of our free web server KinariWeb, incorporates advanced web technologies, emphasizes the reproducibility of its experiments, and makes substantially improved tools available to the user. It is designed specifically for large scale experiments, in particular, for (a) very large molecules, including bioassemblies with high degree of symmetry such as viruses and crystals, (b) large collections of related biomolecules, such as those obtained through simulated dilutions, mutations, or conformational changes from various types of dynamics simulations, and (c) is intended to work as seemlessly as possible on the large, idiosyncratic, publicly available repository of biomolecules, the Protein Data Bank. We describe the system design, along with the main data processing, computational, mathematical, and validation challenges underlying this phase of the KINARI project. PMID:26958583

Spatial access disparities to primary health care in rural and remote Australia.

PubMed

McGrail, Matthew Richard; Humphreys, John Stirling

2015-11-04

Poor spatial access to health care remains a key issue for rural populations worldwide. Whilst geographic information systems (GIS) have enabled the development of more sophisticated access measures, they are yet to be adopted into health policy and workforce planning. This paper provides and tests a new national-level approach to measuring primary health care (PHC) access for rural Australia, suitable for use in macro-level health policy. The new index was constructed using a modified two-step floating catchment area method framework and the smallest available geographic unit. Primary health care spatial access was operationalised using three broad components: availability of PHC (general practitioner) services; proximity of populations to PHC services; and PHC needs of the population. Data used in its measurement were specifically chosen for accuracy, reliability and ongoing availability for small areas. The resultant index reveals spatial disparities of access to PHC across rural Australia. While generally more remote areas experienced poorer access than more populated rural areas, there were numerous exceptions to this generalisation, with some rural areas close to metropolitan areas having very poor access and some increasingly remote areas having relatively good access. This new index provides a geographically-sensitive measure of access, which is readily updateable and enables a fine granulation of access disparities. Such an index can underpin national rural health programmes and policies designed to improve rural workforce recruitment and retention, and, importantly, health service planning and resource allocation decisions designed to improve equity of PHC access.

Institutional transformation: An analysis of change initiatives at NSF ADVANCE institutions

NASA Astrophysics Data System (ADS)

Plummer, Ellen W.

The purpose of this study was to examine how institutional culture promoted or impeded the implementation of round one and two NSF ADVANCE initiatives designed to improve academic climates for women in science and engineering. This study was conducted in two phases. In phase one, 35 participants from 18 institutions were interviewed to answer three research questions. Participants identified a policy, process, or program designed to improve academic cultures for women in science and engineering fields. Participants also identified strategies that promoted the implementation of these efforts, and discussed factors that impeded these efforts. In phase two, site visits were conducted at two institutions to answer a fourth research question. How did institutional culture shape the design and implementation of faculty search processes? Policies, processes, and programs were implemented by participants at the institutional, departmental, and individual levels and included family friendly and dual career policies at the institutional level, improved departmental faculty search and climate improvement processes, and mentoring programs and training for department heads at the individual level. Communication and leadership strategies were key to the successful implementation of policies, processes, and programs designed to achieve institutional transformation. Communication strategies involved shaping change messages to reach varied audiences often with the argument that change efforts would improve the climate for everyone not just women faculty members. Administrative and faculty leaders from multiple levels proved important to change efforts. Institutional Transformation Institutional culture shaped initiatives to improve faculty search processes. Faculty leaders in both settings used data to persuade faculty members of the need for change. At one site, data that included national availability information was critical to advancing the change agenda. At the other site, social science data that illustrated gender bias was persuasive. Faculty members who were effective as change agents were those who were credible with their peers in that setting.

Design of an expert-system flight status monitor

NASA Technical Reports Server (NTRS)

Regenie, V. A.; Duke, E. L.

1985-01-01

The modern advanced avionics in new high-performance aircraft strains the capability of current technology to safely monitor these systems for flight test prior to their generalized use. New techniques are needed to improve the ability of systems engineers to understand and analyze complex systems in the limited time available during crucial periods of the flight test. The Dryden Flight Research Facility of NASA's Ames Research Center is involved in the design and implementation of an expert system to provide expertise and knowledge to aid the flight systems engineer. The need for new techniques in monitoring flight systems and the conceptual design of an expert-system flight status monitor is discussed. The status of the current project and its goals are described.

Equipment. [for testing human space perception

NASA Technical Reports Server (NTRS)

1974-01-01

A discussion is presented on the problems encountered in designing and constructing a simulator to determine human vestibular response to a range of linear accelerations from 0 to 0.3 g's. Starting with a set of initial performance specifications, the designers combined an array of commercially available components into a system which, altough requiring further refinement before completion, shows considerable promise of fulfilling the initial requirements. The resulting system consists of a wheeled vehicle driven by a cable and drum arrangement, powered by a hydraulic-electric servo-valve. Technical design considerations are presented along with a discussion of the trade-offs between various component options. A description of the system characteristics as well as an analysis of preliminary test results and recommendations for future system improvements are included.

The Design and Implementation of Network Teaching Platform Basing on .NET

NASA Astrophysics Data System (ADS)

Yanna, Ren

This paper addresses the problem that students under traditional teaching model have poor operation ability and studies in depth the network teaching platform in domestic colleges and universities, proposing the design concept of network teaching platform of NET + C # + SQL excellent course and designing the overall structure, function module and back-end database of the platform. This paper emphatically expounds the use of MD5 encryption techniques in order to solve data security problems and the assessment of student learning using ADO.NET database access technology as well as the mathematical formula. The example shows that the network teaching platform developed by using WEB application technology has higher safety and availability, and thus improves the students' operation ability.

Global precipitation measurement (GPM) preliminary design

NASA Astrophysics Data System (ADS)

Neeck, Steven P.; Kakar, Ramesh K.; Azarbarzin, Ardeshir A.; Hou, Arthur Y.

2008-10-01

The overarching Earth science mission objective of the Global Precipitation Measurement (GPM) mission is to develop a scientific understanding of the Earth system and its response to natural and human-induced changes. This will enable improved prediction of climate, weather, and natural hazards for present and future generations. The specific scientific objectives of GPM are advancing: Precipitation Measurement through combined use of active and passive remote-sensing techniques, Water/Energy Cycle Variability through improved knowledge of the global water/energy cycle and fresh water availability, Climate Prediction through better understanding of surface water fluxes, soil moisture storage, cloud/precipitation microphysics and latent heat release, Weather Prediction through improved numerical weather prediction (NWP) skills from more accurate and frequent measurements of instantaneous rain rates with better error characterizations and improved assimilation methods, Hydrometeorological Prediction through better temporal sampling and spatial coverage of highresolution precipitation measurements and innovative hydro-meteorological modeling. GPM is a joint initiative with the Japan Aerospace Exploration Agency (JAXA) and other international partners and is the backbone of the Committee on Earth Observation Satellites (CEOS) Precipitation Constellation. It will unify and improve global precipitation measurements from a constellation of dedicated and operational active/passive microwave sensors. GPM is completing the Preliminary Design Phase and is advancing towards launch in 2013 and 2014.

Stochastic seismic response of building with super-elastic damper

NASA Astrophysics Data System (ADS)

Gur, Sourav; Mishra, Sudib Kumar; Roy, Koushik

2016-05-01

Hysteretic yield dampers are widely employed for seismic vibration control of buildings. An improved version of such damper has been proposed recently by exploiting the superelastic force-deformation characteristics of the Shape-Memory-Alloy (SMA). Although a number of studies have illustrated the performance of such damper, precise estimate of the optimal parameters and performances, along with the comparison with the conventional yield damper is lacking. Presently, the optimal parameters for the superelastic damper are proposed by conducting systematic design optimization, in which, the stochastic response serves as the objective function, evaluated through nonlinear random vibration analysis. These optimal parameters can be employed to establish an initial design for the SMA-damper. Further, a comparison among the optimal responses is also presented in order to assess the improvement that can be achieved by the superelastic damper over the yield damper. The consistency of the improvements is also checked by considering the anticipated variation in the system parameters as well as seismic loading condition. In spite of the improved performance of super-elastic damper, the available variant of SMA(s) is quite expensive to limit their applicability. However, recently developed ferrous SMA are expected to offer even superior performance along with improved cost effectiveness, that can be studied through a life cycle cost analysis in future work.

Performance improvement of planar dielectric elastomer actuators by magnetic modulating mechanism

NASA Astrophysics Data System (ADS)

Zhao, Yun-Hua; Li, Wen-Bo; Zhang, Wen-Ming; Yan, Han; Peng, Zhi-Ke; Meng, Guang

2018-06-01

In this paper, a novel planar dielectric elastomer actuator (DEA) with magnetic modulating mechanism is proposed. This design can provide the availability of wider actuation range and larger output force, which are significant indicators to evaluate the performance of DEAs. The DEA tends to be a compact and simple design, and an analytical model is developed to characterize the mechanical behavior. The result shows that the output force induced by the DEA can be improved by 76.90% under a certain applied voltage and initial magnet distance. Moreover, experiments are carried out to reveal the performance of the proposed DEA and validate the theoretical model. It demonstrates that the DEA using magnetic modulating mechanism can enlarge the actuation range and has more remarkable effect with decreasing initial magnet distance within the stable range. It can be useful to promote the applications of DEAs to soft robots and haptic feedback.

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2001-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2002-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Experience gained from engineering, construction, and maintenance of nuclear power plants in the Federal Republic of Germany

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckert, G.; Huempfner, P.

From the very beginning of nuclear power engineering in the Federal Republic of Germany (FRG), the main objective was to achieve a high degree of reliability for all safety systems, the nuclear steam supply systems, and the balance of plant. Major measures of a general nature included the following: (1) provision of the same redundancy for all parts of systems related to safety or availability; (2) introduction of appropriate quality assurance programs for design, development, manufacture, erection, testing, operation, and maintenance; and (3) optimization of design, not with the aim of reducing plant costs but in order to improve operationmore » and safety. A few examples are provided of improvements that Kraftwerk Union AG, as a supplier of turnkey nuclear power plants, has incorporated in its plants over the past years.« less

IGBT Gate Driver Upgrades to the HVCM at the SNS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solley, Dennis J; Anderson, David E; Patel, Gunjan P

2012-01-01

The SNS at ORNL has been fully operational since 2006 and in September 2009, the design goal of 1MW of sustained beam power on target was achieved. Historically, the high voltage converter modulators (HVCM) have been a known problem area and, in order to reach another SNS milestone of 90% availability, a new gate driver was one of several areas targeted to improve the overall reliability of the HVCM systems. The drive capability and fault protection of the large IGBT modules in the HVCM were specifically addressed to improve IGBT switching characteristics and provide enhanced troubleshooting and monitoring capabilities formore » the critical IGBT/driver pair. This paper outlines the work involved; the result obtained and documents the driver s long-term performance. Enhanced features, designed to be used in conjunction with a new controller presently under development, will also be discussed.« less

Control of Flexible Structures (COFS) Flight Experiment Background and Description

NASA Technical Reports Server (NTRS)

Hanks, B. R.

1985-01-01

A fundamental problem in designing and delivering large space structures to orbit is to provide sufficient structural stiffness and static configuration precision to meet performance requirements. These requirements are directly related to control requirements and the degree of control system sophistication available to supplement the as-built structure. Background and rationale are presented for a research study in structures, structural dynamics, and controls using a relatively large, flexible beam as a focus. This experiment would address fundamental problems applicable to large, flexible space structures in general and would involve a combination of ground tests, flight behavior prediction, and instrumented orbital tests. Intended to be multidisciplinary but basic within each discipline, the experiment should provide improved understanding and confidence in making design trades between structural conservatism and control system sophistication for meeting static shape and dynamic response/stability requirements. Quantitative results should be obtained for use in improving the validity of ground tests for verifying flight performance analyses.

User-centered design to improve clinical decision support in primary care.

PubMed

Brunner, Julian; Chuang, Emmeline; Goldzweig, Caroline; Cain, Cindy L; Sugar, Catherine; Yano, Elizabeth M

2017-08-01

A growing literature has demonstrated the ability of user-centered design to make clinical decision support systems more effective and easier to use. However, studies of user-centered design have rarely examined more than a handful of sites at a time, and have frequently neglected the implementation climate and organizational resources that influence clinical decision support. The inclusion of such factors was identified by a systematic review as "the most important improvement that can be made in health IT evaluations." (1) Identify the prevalence of four user-centered design practices at United States Veterans Affairs (VA) primary care clinics and assess the perceived utility of clinical decision support at those clinics; (2) Evaluate the association between those user-centered design practices and the perceived utility of clinical decision support. We analyzed clinic-level survey data collected in 2006-2007 from 170 VA primary care clinics. We examined four user-centered design practices: 1) pilot testing, 2) provider satisfaction assessment, 3) formal usability assessment, and 4) analysis of impact on performance improvement. We used a regression model to evaluate the association between user-centered design practices and the perceived utility of clinical decision support, while accounting for other important factors at those clinics, including implementation climate, available resources, and structural characteristics. We also examined associations separately at community-based clinics and at hospital-based clinics. User-centered design practices for clinical decision support varied across clinics: 74% conducted pilot testing, 62% conducted provider satisfaction assessment, 36% conducted a formal usability assessment, and 79% conducted an analysis of impact on performance improvement. Overall perceived utility of clinical decision support was high, with a mean rating of 4.17 (±.67) out of 5 on a composite measure. "Analysis of impact on performance improvement" was the only user-centered design practice significantly associated with perceived utility of clinical decision support, b=.47 (p<.001). This association was present in hospital-based clinics, b=.34 (p<.05), but was stronger at community-based clinics, b=.61 (p<.001). Our findings are highly supportive of the practice of analyzing the impact of clinical decision support on performance metrics. This was the most common user-centered design practice in our study, and was the practice associated with higher perceived utility of clinical decision support. This practice may be particularly helpful at community-based clinics, which are typically less connected to VA medical center resources. Published by Elsevier B.V.

Interventions aimed at improving the nursing work environment: a systematic review

PubMed Central

2010-01-01

Background Nursing work environments (NWEs) in Canada and other Western countries have increasingly received attention following years of restructuring and reported high workloads, high absenteeism, and shortages of nursing staff. Despite numerous efforts to improve NWEs, little is known about the effectiveness of interventions to improve NWEs. The aim of this study was to review systematically the scientific literature on implemented interventions aimed at improving the NWE and their effectiveness. Methods An online search of the databases CINAHL, Medline, Scopus, ABI, Academic Search Complete, HEALTHstar, ERIC, Psychinfo, and Embase, and a manual search of Emerald and Longwoods was conducted. (Quasi-) experimental studies with pre/post measures of interventions aimed at improving the NWE, study populations of nurses, and quantitative outcome measures of the nursing work environment were required for inclusion. Each study was assessed for methodological strength using a quality assessment and validity tool for intervention studies. A taxonomy of NWE characteristics was developed that would allow us to identify on which part of the NWE an intervention targeted for improvement, after which the effects of the interventions were examined. Results Over 9,000 titles and abstracts were screened. Eleven controlled intervention studies met the inclusion criteria, of which eight used a quasi-experimental design and three an experimental design. In total, nine different interventions were reported in the included studies. The most effective interventions at improving the NWE were: primary nursing (two studies), the educational toolbox (one study), the individualized care and clinical supervision (one study), and the violence prevention intervention (one study). Conclusions Little is known about the effectiveness of interventions aimed at improving the NWE, and published studies on this topic show weaknesses in their design. To advance the field, we recommend that investigators use controlled studies with pre/post measures to evaluate interventions that are aimed at improving the NWE. Thereby, more evidence-based knowledge about the implementation of interventions will become available for healthcare leaders to use in rebuilding nursing work environments. PMID:20423492

Update on Improved Undergraduate Astronomy Laboratories with a Modern Telescope Control System

NASA Astrophysics Data System (ADS)

Jacobi, Ian; Broder, D.; Finn, R.; Milano, A. J.; Newberg, H.; Weatherwax, A.; Whittet, D.

2007-12-01

We are completing a cooperative astronomy education project designed to improve undergraduate laboratories at RPI (a PhD granting institution) and Siena College (a nearby liberal arts college). Following the overhaul of a 40-year-old, 16" B&C telescope on the RPI campus, we have made it available for use for hundreds of students at both schools and once per week to the public. This telescope has been integrated into studio-style, hands-on, inquiry-based laboratories designed to challenge student misconceptions. An assessment test was designed and distributed to the students taking the course at the beginning and end of the Fall 2007 semester, the results of which we compare to a baseline study undertaken in Fall 2006 and Spring 2007 to determine the efficacy of the laboratories in improving undergraduate astronomy education. In order to handle a large number of students using the main telescope and a limited number of smaller telescopes, we have cycled students through concurrent activites. This has been enabled by the rapid acquisition and imaging of targets made possible by the upgrade to the control system of our 16" telescope. We show preliminary results of the Fall 2007 assessments and comparisons to the baseline assessment. This project is funded by an NSF CCLI grant, 05-11340.

Design and evaluation of a seat orientation controller during uneven terrain driving.

PubMed

Candiotti, Jorge; Wang, Hongwu; Chung, Cheng-Shiu; Kamaraj, Deepan C; Grindle, Garrett G; Shino, Motoki; Cooper, Rory A

2016-03-01

Electric powered wheelchairs (EPWs) are essential devices for people with disabilities as aids for mobility and quality of life improvement. However, the design of currently available common EPWs is still limited and makes it challenging for the users to drive in both indoor and outdoor environments such as uneven surfaces, steep hills, or cross slopes, making EPWs susceptible to loss of stability and at risk for falls. An alternative wheel-legged robotic wheelchair, "MEBot", was designed to improve the safety and mobility of EPW users in both indoor and outdoor environments. MEBot is able to elevate its six wheels using pneumatic actuators, as well to detect changes in the seat angle using a gyroscope and accelerometer. This capability enables MEBot to provide sensing for a dynamic self-leveling seat application that can maintain the center of mass within the boundaries of the wheelchair, thereby, improving EPW safety. To verify the effectiveness of the application, MEBot was tested on a motion platform with six degrees of freedom to simulate different slopes that could be experienced by the EPW in outdoor environments. The results demonstrate the robustness of the application to maintain the wheelchair seat in a horizontal reference against changes in the ground angle. Published by Elsevier Ltd.

A Closed Network Queue Model of Underground Coal Mining Production, Failure, and Repair

NASA Technical Reports Server (NTRS)

Lohman, G. M.

1978-01-01

Underground coal mining system production, failures, and repair cycles were mathematically modeled as a closed network of two queues in series. The model was designed to better understand the technological constraints on availability of current underground mining systems, and to develop guidelines for estimating the availability of advanced mining systems and their associated needs for spares as well as production and maintenance personnel. It was found that: mine performance is theoretically limited by the maintainability ratio, significant gains in availability appear possible by means of small improvements in the time between failures the number of crews and sections should be properly balanced for any given maintainability ratio, and main haulage systems closest to the mine mouth require the most attention to reliability.

FIZICS: fluorescent imaging zone identification system, a novel macro imaging system.

PubMed

Skwish, Stephen; Asensio, Francisco; King, Greg; Clarke, Glenn; Kath, Gary; Salvatore, Michael J; Dufresne, Claude

2004-12-01

Constantly improving biological assay development continues to drive technological requirements. Recently, a specification was defined for capturing white light and fluorescent images of agar plates ranging in size from the NUNC Omni tray (96-well footprint, 128 x 85 mm) to the NUNC Bio Assay Dish (245 x 245 mm). An evaluation of commercially available products failed to identify any system capable of fluorescent macroimaging with discrete wavelength selection. To address the lack of a commercially available system, a custom imaging system was designed and constructed. This system provides the same capabilities of many commercially available systems with the added ability to fluorescently image up to a 245 x 245 mm area using wavelengths in the visible light spectrum.

The Handover Toolbox: a knowledge exchange and training platform for improving patient care.

PubMed

Drachsler, Hendrik; Kicken, Wendy; van der Klink, Marcel; Stoyanov, Slavi; Boshuizen, Henny P A; Barach, Paul

2012-12-01

Safe and effective patient handovers remain a global organisational and training challenge. Limited evidence supports available handover training programmes. Customisable training is a promising approach to improve the quality and sustainability of handover training and outcomes. We present a Handover Toolbox designed in the context of the European HANDOVER Project. The Toolbox aims to support physicians, nurses, individuals in health professions training, medical educators and handover experts by providing customised handover training tools for different clinical needs and contexts. The Handover Toolbox uses the Technology Enhanced Learning Design Process (TEL-DP), which encompasses user requirements analysis; writing personas; group concept mapping; analysis of suitable software; plus, minus, interesting rating; and usability testing. TEL-DP is aligned with participatory design approaches and ensures development occurs in close collaboration with, and engagement of, key stakeholders. Application of TEL-DP confirmed that the ideal formats of handover training differs for practicing professionals versus individuals in health profession education programmes. Training experts from different countries differed in their views on the optimal content and delivery of training. Analysis of suitable software identified ready-to-use systems that provide required functionalities and can be further customised to users' needs. Interest rating and usability testing resulted in improved usability, navigation and uptake of the Handover Toolbox. The design of the Handover Toolbox was based on a carefully led stakeholder participatory design using the TEL-DP approach. The Toolbox supports a customisable learning approach that allows trainers to design training that addresses the specific information needs of the various target groups. We offer recommendations regarding the application of the Handover Toolbox to medical educators.

A new preparedness policy for EMS logistics.

PubMed

Lee, Seokcheon

2017-03-01

Response time in emergency medical services (EMS) is defined as the interval for an ambulance to arrive the scene after receipt of a 911 call. When several ambulances are available upon the receipt of a new call, a decision of selecting an ambulance has to be made in an effort to reduce response time. Dispatching the closest unit available is commonly used in practice; however, recently the Preparedness policy was designed that is in a simplistic form yet being capable of securing a long-term efficiency. This research aims to improve the Preparedness policy, resolving several critical issues inherent in the current form of the policy. The new Preparedness policy incorporates a new metric of preparedness based on the notion of centrality and involves a tuning parameter, weight on preparedness, which has to be appropriately chosen according to operational scenario. Computational experiment shows that the new policy significantly improves the former policy robustly in various scenarios.

Advanced Direct-Drive Generator for Improved Availability of Oscillating Wave Surge Converter Power Generation Systems Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Englebretson, Steven; Ouyang, Wen; Tschida, Colin

This report summarizes the activities conducted under the DOE-EERE funded project DE-EE0006400, where ABB Inc. (ABB), in collaboration with Texas A&M’s Advanced Electric Machines & Power Electronics (EMPE) Lab and Resolute Marine Energy (RME) designed, derisked, developed, and demonstrated a novel magnetically geared electrical generator for direct-drive, low-speed, high torque MHK applications The project objective was to investigate a novel and compact direct-drive electric generator and its system aspects that would enable elimination of hydraulic components in the Power Take-Off (PTO) of a Marine and Hydrokinetic (MHK) system with an oscillating wave surge converter (OWSC), thereby improving the availability ofmore » the MHK system. The scope of this project was limited to the development and dry lab demonstration of a low speed generator to enable future direct drive MHK systems.« less

Cardiac Imaging System

NASA Technical Reports Server (NTRS)

1990-01-01

Although not available to all patients with narrowed arteries, balloon angioplasty has expanded dramatically since its introduction with an estimated further growth to 562,000 procedures in the U.S. alone by 1992. Growth has fueled demand for higher quality imaging systems that allow the cardiologist to be more accurate and increase the chances of a successful procedure. A major advance is the Digital Cardiac Imaging (DCI) System designed by Philips Medical Systems International, Best, The Netherlands and marketed in the U.S. by Philips Medical Systems North America Company. The key benefit is significantly improved real-time imaging and the ability to employ image enhancement techniques to bring out added details. Using a cordless control unit, the cardiologist can manipulate images to make immediate assessment, compare live x-ray and roadmap images by placing them side-by-side on monitor screens, or compare pre-procedure and post procedure conditions. The Philips DCI improves the cardiologist's precision by expanding the information available to him.

Radiology workstation design for the medical intensive care unit.

PubMed

Moise, Adrian; Atkins, Stella M

2002-01-01

The "one-size-fits-all" approach for radiology workstation design is not good enough anymore. While most of the picture archiving and communication system (PACS) vendors are racing to add more features to the radiology workstation, there is little interest in addressing the specific needs of other hospital departments. Significant delays in the availability of radiology reports are often caused by the fact there is not enough Intensive Care Unit (ICU) volume to justify a full time radiologist. Consequently, the radiologist assigned to cover the ICU exams, most likely working from a different building, will read the ICU exams only at certain times, depending on the limitations for remote image availability. This paper addresses the main objectives in designing a digital radiology workstation for use in the medical ICU (MICU), requiring enhancements to current PACS systems. Our suggestions for PACS improvement follow the ICU digital workflow starting with the transfer of the images from the modality, continuing with the presentation of the radiology examination to different types of users (radiologists or ICU staff), up to the creation and distribution of the reports.

Delivering better power: the role of simulation in reducing the environmental impact of aircraft engines.

PubMed

Menzies, Kevin

2014-08-13

The growth in simulation capability over the past 20 years has led to remarkable changes in the design process for gas turbines. The availability of relatively cheap computational power coupled to improvements in numerical methods and physical modelling in simulation codes have enabled the development of aircraft propulsion systems that are more powerful and yet more efficient than ever before. However, the design challenges are correspondingly greater, especially to reduce environmental impact. The simulation requirements to achieve a reduced environmental impact are described along with the implications of continued growth in available computational power. It is concluded that achieving the environmental goals will demand large-scale multi-disciplinary simulations requiring significantly increased computational power, to enable optimization of the airframe and propulsion system over the entire operational envelope. However even with massive parallelization, the limits imposed by communications latency will constrain the time required to achieve a solution, and therefore the position of such large-scale calculations in the industrial design process. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Coval: Improving Alignment Quality and Variant Calling Accuracy for Next-Generation Sequencing Data

PubMed Central

Kosugi, Shunichi; Natsume, Satoshi; Yoshida, Kentaro; MacLean, Daniel; Cano, Liliana; Kamoun, Sophien; Terauchi, Ryohei

2013-01-01

Accurate identification of DNA polymorphisms using next-generation sequencing technology is challenging because of a high rate of sequencing error and incorrect mapping of reads to reference genomes. Currently available short read aligners and DNA variant callers suffer from these problems. We developed the Coval software to improve the quality of short read alignments. Coval is designed to minimize the incidence of spurious alignment of short reads, by filtering mismatched reads that remained in alignments after local realignment and error correction of mismatched reads. The error correction is executed based on the base quality and allele frequency at the non-reference positions for an individual or pooled sample. We demonstrated the utility of Coval by applying it to simulated genomes and experimentally obtained short-read data of rice, nematode, and mouse. Moreover, we found an unexpectedly large number of incorrectly mapped reads in ‘targeted’ alignments, where the whole genome sequencing reads had been aligned to a local genomic segment, and showed that Coval effectively eliminated such spurious alignments. We conclude that Coval significantly improves the quality of short-read sequence alignments, thereby increasing the calling accuracy of currently available tools for SNP and indel identification. Coval is available at http://sourceforge.net/projects/coval105/. PMID:24116042

Factors Affecting Availability of Essential Medicines among Community Health Workers in Ethiopia, Malawi, and Rwanda: Solving the Last Mile Puzzle

PubMed Central

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K.; Williams, Timothy

2012-01-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation. PMID:23136287

Factors affecting availability of essential medicines among community health workers in Ethiopia, Malawi, and Rwanda: solving the last mile puzzle.

PubMed

Chandani, Yasmin; Noel, Megan; Pomeroy, Amanda; Andersson, Sarah; Pahl, Michelle K; Williams, Timothy

2012-11-01

To understand how supply chain factors affect product availability at the community level, the Improving Supply Chains for Community Case Management of Pneumonia and Other Common Diseases of Childhood Project developed a theory of change (TOC) framework for gathering, organizing, and interpreting evidence about supply constraints to community case management (CCM). Baseline assessments in Ethiopia, Malawi, and Rwanda conducted in 2010 provided information on the strengths and weaknesses of existing CCM supply chains for five main products: antibiotics for pneumonia, oral rehydration solution, ready to use therapeutic food, zinc, and artemether/lumefantrine. The assessments tested the strength and validity of causal pathways identified in the TOC that were believed to influence availability of CCM products among community health workers (CHWs) for treating common childhood illnesses. Results of the assessments showed product availability to be weak in each country, with more than half of CHWs stocked out of at least one tracer product on the day of the assessment. This report will focus on the findings related to three key preconditions of the TOC and how these were used to inform the design of the CCM supply chain improvement strategy in each country. The three key preconditions include product availability at CHW resupply points, supply chain knowledge and capacity among CHWs and their supervisors, and availability of appropriate transportation.

Slicing of Silicon into Sheet Material. Silicon Sheet Growth Development for the Large Area Silicon Sheet Task of the Low Cost Solar Array Project

NASA Technical Reports Server (NTRS)

Fleming, J. R.; Holden, S. C.; Wolfson, R. G.

1979-01-01

The use of multiblade slurry sawing to produce silicon wafers from ingots was investigated. The commercially available state of the art process was improved by 20% in terms of area of silicon wafers produced from an ingot. The process was improved 34% on an experimental basis. Economic analyses presented show that further improvements are necessary to approach the desired wafer costs, mostly reduction in expendable materials costs. Tests which indicate that such reduction is possible are included, although demonstration of such reduction was not completed. A new, large capacity saw was designed and tested. Performance comparable with current equipment (in terms of number of wafers/cm) was demonstrated.

DeMAID/GA an Enhanced Design Manager's Aid for Intelligent Decomposition

NASA Technical Reports Server (NTRS)

Rogers, J. L.

1996-01-01

Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial public release of DeMAID in 1989, much research has been done in the areas of decomposition, concurrent engineering, parallel processing, and process management; many new tools and techniques have emerged. Based on these recent research and development efforts, numerous enhancements have been added to DeMAID to further aid the design manager in saving both cost and time in a design cycle. The key enhancement, a genetic algorithm (GA), will be available in the next public release called DeMAID/GA. The GA sequences the design processes to minimize the cost and time in converging a solution. The major enhancements in the upgrade of DeMAID to DeMAID/GA are discussed in this paper. A sample conceptual design project is used to show how these enhancements can be applied to improve the design cycle.

Patient-reported outcomes in randomised controlled trials of colorectal cancer: an analysis determining the availability of robust data to inform clinical decision-making

PubMed Central

Whale, Katie; Fish, Daniel; Fayers, Peter; Cafaro, Valentina; Pusic, Andrea; Blazeby, Jane M.; Efficace, Fabio

2016-01-01

Purpose Randomised controlled trials (RCTs) are the most robust study design measuring outcomes of colorectal cancer (CRC) treatments, but to influence clinical practice trial design and reporting of patient-reported outcomes (PROs) must be of high quality. Objectives of this study were as follows: to examine the quality of PRO reporting in RCTs of CRC treatment; to assess the availability of robust data to inform clinical decision-making; and to investigate whether quality of reporting improved over time. Methods A systematic review from January 2004–February 2012 identified RCTs of CRC treatment describing PROs. Relevant abstracts were screened and manuscripts obtained. Methodological quality was assessed using International Society for Quality of Life Research—patient-reported outcome reporting standards. Changes in reporting quality over time were established by comparison with previous data, and risk of bias was assessed with the Cochrane risk of bias tool. Results Sixty-six RCTs were identified, seven studies (10 %) reported survival benefit favouring the experimental treatment, 35 trials (53 %) identified differences in PROs between treatment groups, and the clinical significance of these differences was discussed in 19 studies (29 %). The most commonly reported treatment type was chemotherapy (n = 45; 68 %). Improvements over time in key methodological issues including the documentation of missing data and the discussion of the clinical significance of PROs were found. Thirteen trials (20 %) had high-quality reporting. Conclusions Whilst improvements in PRO quality reporting over time were found, several recent studies still fail to robustly inform clinical practice. Quality of PRO reporting must continue to improve to maximise the clinical impact of PRO findings. PMID:25910987

Triple Aim in Canada: developing capacity to lead to better health, care and cost

PubMed Central

Farmanova, Elina; Kirvan, Christine; Verma, Jennifer; Mukerji, Geetha; Akunov, Nurdin; Phillips, Kaye; Samis, Stephen

2016-01-01

Abstract Quality problem Many modern health systems strive for ‘Triple Aim’ (TA)—better health for populations, improved experience of care for patients and lower costs of the system, but note challenges in implementation. Outcomes of applying TA as a quality improvement framework (QI) have started to be realized with early lessons as to why some systems make progress while others do not. Initial assessment Limited evidence is available as to how organizations create the capacity and infrastructure required to design, implement, evaluate and sustain TA systems. Choice of solution To support embedding TA across Canada, the Canadian Foundation for Healthcare Improvement supported enrolment of nine Canadian teams to participate in the Institute for Healthcare Improvement's TA Improvement Community. Implementation Structured support for TA design, implementation, evaluation and sustainability was addressed in a collaborative programme of webinars and action periods. Teams were coached to undertake and test small-scale improvements before attempting to scale. Evaluation A summative evaluation of the Canadian cohort was undertaken to assess site progress in building TA infrastructure across various healthcare settings. The evaluation explored the process of change, experiences and challenges and strategies for continuous QI. Lessons learned Delivering TA requires a sustained and coordinated effort supported by strong leadership and governance, continuous QI, engaged interdisciplinary teams and partnering within and beyond the healthcare sector. PMID:28423164

Triple Aim in Canada: developing capacity to lead to better health, care and cost.

PubMed

Farmanova, Elina; Kirvan, Christine; Verma, Jennifer; Mukerji, Geetha; Akunov, Nurdin; Phillips, Kaye; Samis, Stephen

2016-12-01

Many modern health systems strive for 'Triple Aim' (TA)-better health for populations, improved experience of care for patients and lower costs of the system, but note challenges in implementation. Outcomes of applying TA as a quality improvement framework (QI) have started to be realized with early lessons as to why some systems make progress while others do not. Limited evidence is available as to how organizations create the capacity and infrastructure required to design, implement, evaluate and sustain TA systems. To support embedding TA across Canada, the Canadian Foundation for Healthcare Improvement supported enrolment of nine Canadian teams to participate in the Institute for Healthcare Improvement's TA Improvement Community. Structured support for TA design, implementation, evaluation and sustainability was addressed in a collaborative programme of webinars and action periods. Teams were coached to undertake and test small-scale improvements before attempting to scale. A summative evaluation of the Canadian cohort was undertaken to assess site progress in building TA infrastructure across various healthcare settings. The evaluation explored the process of change, experiences and challenges and strategies for continuous QI. Delivering TA requires a sustained and coordinated effort supported by strong leadership and governance, continuous QI, engaged interdisciplinary teams and partnering within and beyond the healthcare sector. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care.

Advantages of Crystallographic Fragment Screening: Functional and Mechanistic Insights from a Powerful Platform for Efficient Drug Discovery

PubMed Central

Patel, Disha; Bauman, Joseph D.; Arnold, Eddy

2015-01-01

X-ray crystallography has been an under-appreciated screening tool for fragment-based drug discovery due to the perception of low throughput and technical difficulty. Investigators in industry and academia have overcome these challenges by taking advantage of key factors that contribute to a successful crystallographic screening campaign. Efficient cocktail design and soaking methodologies have evolved to maximize throughput while minimizing false positives/negatives. In addition, technical improvements at synchrotron beamlines have dramatically increased data collection rates thus enabling screening on a timescale comparable to other techniques. The combination of available resources and efficient experimental design has resulted in many successful crystallographic screening campaigns. The three-dimensional crystal structure of the bound fragment complexed to its target, a direct result of the screening effort, enables structure-based drug design while revealing insights regarding protein dynamics and function not readily obtained through other experimental approaches. Furthermore, this “chemical interrogation” of the target protein crystals can lead to the identification of useful reagents for improving diffraction resolution or compound solubility. PMID:25117499

Low-Cost Behavioral Nudges Increase Medicaid Take-Up Among Eligible Residents Of Oregon.

PubMed

Wright, Bill J; Garcia-Alexander, Ginny; Weller, Margarette A; Baicker, Katherine

2017-05-01

Efforts to reduce the ranks of the uninsured hinge on take-up of available programs and subsidies, but take-up of even free insurance is often less than complete. The evidence of the effectiveness of policies aiming to increase take-up is limited. We used a randomized controlled design to evaluate the impact of improved communication and behaviorally informed "nudges" designed to increase Medicaid take-up among eligible populations. Fielding randomized interventions in two different study populations in Oregon, we found that even very low-cost interventions substantially increased enrollment. Effects were larger in a population whose members had already expressed interest in obtaining coverage, but the effects were more persistent in low-income populations whose members were already enrolled in other state assistance programs but had not expressed interest in health insurance. The effects were similar across different demographic groups. Our results suggest that improving the design of enrollment processes and using low-cost mass-outreach efforts have the potential to substantially increase insurance coverage of vulnerable populations. Project HOPE—The People-to-People Health Foundation, Inc.

How to improve the comfort of Kesawan Heritage Corridor, Medan City

NASA Astrophysics Data System (ADS)

Tegar; Ginting, Nurlisa; Suwantoro, H.

2018-03-01

Comfort is indispensable to make a friendly neighborhood or city. Especially the comfort of the infrastructure in the corridor. People must be able to feel comfortable to act rationally in their physical environment. Existing infrastructure must able to support Kesawan as a historic district. Kesawan is an area that is filled with so many unique buildings. Without comfort, how good the existing buildings’ architecture cannot be enjoyed. It will also affect the identity of a region or city. The aim of this research is to re-design the public facilities from Kesawan corridor’s comfort aspect: orientation, traffic calming, vegetation, signage, public facilities (toilet, seating place, bus station, bins), information center, parking and pedestrian path. It will translate the design concept in the form of design criteria. This research uses qualitative methods. Some facilities in this corridor are unsuitable even some of them are not available. So, we need some improvements and additions to the existing facilities. It is expected that by upgrading the existing facilities, visitors who come to Kesawan will be able to enjoy more and able to make Medan city more friendly.

Advantages of crystallographic fragment screening: functional and mechanistic insights from a powerful platform for efficient drug discovery.

PubMed

Patel, Disha; Bauman, Joseph D; Arnold, Eddy

2014-01-01

X-ray crystallography has been an under-appreciated screening tool for fragment-based drug discovery due to the perception of low throughput and technical difficulty. Investigators in industry and academia have overcome these challenges by taking advantage of key factors that contribute to a successful crystallographic screening campaign. Efficient cocktail design and soaking methodologies have evolved to maximize throughput while minimizing false positives/negatives. In addition, technical improvements at synchrotron beamlines have dramatically increased data collection rates thus enabling screening on a timescale comparable to other techniques. The combination of available resources and efficient experimental design has resulted in many successful crystallographic screening campaigns. The three-dimensional crystal structure of the bound fragment complexed to its target, a direct result of the screening effort, enables structure-based drug design while revealing insights regarding protein dynamics and function not readily obtained through other experimental approaches. Furthermore, this "chemical interrogation" of the target protein crystals can lead to the identification of useful reagents for improving diffraction resolution or compound solubility. Copyright © 2014. Published by Elsevier Ltd.

The influence of the WIC food package changes on the retail food environment in New Orleans.

PubMed

Rose, Donald; O'Malley, Keelia; Dunaway, Lauren Futrell; Bodor, J Nicholas

2014-01-01

To examine the effect of the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) food package changes on availability of healthy foods in small stores. Pre-post comparison group design with repeat in-store observations. New Orleans. Small stores (n = 102; 77% of total) were visited in 2009. Of these, 91% were observed again in 2010, including both WIC (n = 27) and non-WIC (n = 66) stores. The 2009 WIC food package changes to include healthier foods. Change in store availability of fruits, vegetables, lower-fat milks, whole wheat bread, and brown rice. Change in number of varieties and shelf length of fruits and vegetables. Difference-in-differences analysis using logit models for change in availability and regression models for change in number of varieties or shelf length. The WIC stores were more likely to improve availability of lower-fat milks than non-WIC stores (adjusted odds ratio, 5.0, 95% confidence interval, 1.2-21.0). An even greater relative improvement was seen with whole grains. The WIC stores showed a relative increase in number of varieties of fresh fruits (0.9 ± 0.3; P < .01) and shelf length of vegetables (1.2 ± 0.4 meters; P < .01). Results suggest that WIC changes improved the availability of healthy foods in small stores in New Orleans. Similar changes throughout the country could have a significant impact on neighborhood food environments. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Online Resources to Support Professional Development for Managing and Preserving Geospatial Data

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2013-12-01

Improved capabilities of information and communication technologies (ICT) enable the development of new systems and applications for collecting, managing, disseminating, and using scientific data. New knowledge, skills, and techniques are also being developed to leverage these new ICT capabilities and improve scientific data management practices throughout the entire data lifecycle. In light of these developments and in response to increasing recognition of the wider value of scientific data for society, government agencies are requiring plans for the management, stewardship, and public dissemination of data and research products that are created by government-funded studies. Recognizing that data management and dissemination have not been part of traditional science education programs, new educational programs and learning resources are being developed to prepare new and practicing scientists, data scientists, data managers, and other data professionals with skills in data science and data management. Professional development and training programs also are being developed to address the need for scientists and professionals to improve their expertise in using the tools and techniques for managing and preserving scientific data. The Geospatial Data Preservation Resource Center offers an online catalog of various open access publications, open source tools, and freely available information for the management and stewardship of geospatial data and related resources, such as maps, GIS, and remote sensing data. Containing over 500 resources that can be found by type, topic, or search query, the geopreservation.org website enables discovery of various types of resources to improve capabilities for managing and preserving geospatial data. Applications and software tools can be found for use online or for download. Online journal articles, presentations, reports, blogs, and forums are also available through the website. Available education and training materials include tutorials, primers, guides, and online learning modules. The site enables users to find and access standards, real-world examples, and websites of other resources about geospatial data management. Quick links to lists of resources are available for data managers, system developers, and researchers. New resources are featured regularly to highlight current developments in practice and research. A user-centered approach was taken to design and develop the site iteratively, based on a survey of the expectations and needs of community members who have an interest in the management and preservation of geospatial data. Formative and summative evaluation activities have informed design, content, and feature enhancements to enable users to use the website efficiently and effectively. Continuing management and evaluation of the website keeps the content and the infrastructure current with evolving research, practices, and technology. The design, development, evaluation, and use of the website are described along with selected resources and activities that support education and professional development for the management, preservation, and stewardship of geospatial data.

Making products available among community health workers: Evidence for improving community health supply chains from Ethiopia, Malawi, and Rwanda

PubMed Central

Chandani, Yasmin; Andersson, Sarah; Heaton, Alexis; Noel, Megan; Shieshia, Mildred; Mwirotsi, Amanda; Krudwig, Kirstin; Nsona, Humphreys; Felling, Barbara

2014-01-01

Background A UNICEF review of the challenges to scaling up integrated community case management (iCCM) found that drug shortages were a common bottleneck. In many settings, little thought has gone into the design of supply chains to the community level and limited evidence exists for how to address these unique challenges. SC4CCM’s purpose was to conduct intervention research to identify proven, simple, affordable solutions that address the unique supply chain challenges faced by CHWs and to demonstrate that supply chain constraints at the community level can be overcome. Methods SC4CCM selected three countries to implement supply chain innovations and developed a theory of change (TOC) framework for the learning phase, which identified the main drivers of product availability and was used for baseline assessments, design, implementation and evaluation of interventions in Ethiopia, Malawi, and Rwanda. Interventions were developed in each country and tested over 12–24 months. Mixed–method follow up assessments were conducted in each country in 2012–2013. The Supply Chain for Community Case Management (SC4CCM) Project then simplified the TOC into a Community Health Supply Chain (CHSC) framework to enable cross country analysis Results The findings from interventions in the three countries suggest that the greatest supply chain benefits are realized when all three CHSC framework elements (data flow, product flow, and effective people) are in place and working together. The synergistic effect of these three elements on supply chain performance was most effectively demonstrated by results from the Enhanced Management and Quality Collaborative interventions in Malawi and Rwanda, respectively, which were characterized by lower mean stockout rates and higher in stock rates on day of visit, when compared to other interventions. Conclusions Many conditions are necessary to ensure continuous product availability at the community level, however a supply chain works best when three key elements (product flow, data flow, and effective people) are deliberately included as an integral part of the system design. Although these elements may be designed differently in different settings, streamlining and synchronizing them while ensuring inclusion of all components for each element improves supply chain performance and promotes product availability at the community level. PMID:25520795

The application of reduced-processing decision support systems to facilitate the acquisition of decision-making skills.

PubMed

Perry, Nathan C; Wiggins, Mark W; Childs, Merilyn; Fogarty, Gerard

2013-06-01

The study was designed to examine whether the availability of reduced-processing decision support system interfaces could improve the decision making of inexperienced personnel in the context of Although research into reduced-processing decision support systems has demonstrated benefits in minimizing cognitive load, these benefits have not typically translated into direct improvements in decision accuracy because of the tendency for inexperienced personnel to focus on less-critical information. The authors investigated whether reduced-processing interfaces that direct users' attention toward the most critical cues for decision making can produce improvements in decision-making performance. Novice participants made incident command-related decisions in experimental conditions that differed according to the amount of information that was available within the interface, the level of control that they could exert over the presentation of information, and whether they had received decision training. The results revealed that despite receiving training, participants improved in decision accuracy only when they were provided with an interface that restricted information access to the most critical cues. It was concluded that an interface that restricts information access to only the most critical cues in the scenario can facilitate improvements in decision performance. Decision support system interfaces that encourage the processing of the most critical cues have the potential to improve the accuracy and timeliness of decisions made by inexperienced personnel.

Improving Donor Conversion Rates at a Level One Trauma Center: Impact of Best Practice Guidelines

PubMed Central

Gibbons, Bobby L; Bershad, Vanessa L

2016-01-01

Background Organ availability is a consistently limiting factor in transplant surgery. A primary driver of this limitation is donor conversion rate, which is defined as the percentage of eligible donors for whom procurement is actually performed. An alternative way to increase organ availability is through improved utilization of organs from donors after cardiac death (DCD). Recently, a concerted, multidisciplinary effort has been made within our system to improve conversion rates and DCD utilization, thus increasing organ availability. Study design Retrospective analysis of a prospectively collected database from TransLife, our local organ procurement organization (OPO), as well as the Orlando Regional Medical Center (ORMC) trauma registry, from 2009-2012 (up to 2013 for DCD). During which time, this organization implemented best practice guidelines to improve conversions and DCD utilization. We analyzed yearly conversion rates, DCD donations and population demographics before and after implementation of these policies. Results During the study period, donor conversion rates significantly improved from 58% in 2009 to 82% percent in 2012 hospital-wide (P<0.05); and from 50% in 2009 to 81% in 2012 among trauma patients alone (P<0.05). In addition, total organs transplanted increased from 13 to 31 organs (P<0.05) after implementation of best practice guidelines. No significant differences in trauma population demographics were noted during the study period. Conclusions Based on our experience, the establishment of best practice policies for referral of potential donors, coupled with programs to educate hospital staff on the existence and importance of these policies, leads to significant improvement in donor conversion rates and increased utilization of DCD donors. PMID:28018761

U.S. Seismic Design Maps Web Application

NASA Astrophysics Data System (ADS)

Martinez, E.; Fee, J.

2015-12-01

The application computes earthquake ground motion design parameters compatible with the International Building Code and other seismic design provisions. It is the primary method for design engineers to obtain ground motion parameters for multiple building codes across the country. When designing new buildings and other structures, engineers around the country use the application. Users specify the design code of interest, location, and other parameters to obtain necessary ground motion information consisting of a high-level executive summary as well as detailed information including maps, data, and graphs. Results are formatted such that they can be directly included in a final engineering report. In addition to single-site analysis, the application supports a batch mode for simultaneous consideration of multiple locations. Finally, an application programming interface (API) is available which allows other application developers to integrate this application's results into larger applications for additional processing. Development on the application has proceeded in an iterative manner working with engineers through email, meetings, and workshops. Each iteration provided new features, improved performance, and usability enhancements. This development approach positioned the application to be integral to the structural design process and is now used to produce over 1800 reports daily. Recent efforts have enhanced the application to be a data-driven, mobile-first, responsive web application. Development is ongoing, and source code has recently been published into the open-source community on GitHub. Open-sourcing the code facilitates improved incorporation of user feedback to add new features ensuring the application's continued success.

Recommendations for the Design and Analysis of Treatment Trials for Alcohol Use Disorders

PubMed Central

Witkiewitz, Katie; Finney, John W.; Harris, Alex H.S; Kivlahan, Daniel R.; Kranzler, Henry R.

2015-01-01

Background Over the past 60 years the view that “alcoholism” is a disease for which the only acceptable goal of treatment is abstinence has given way to the recognition that alcohol use disorders (AUDs) occur on a continuum of severity, for which a variety of treatment options are appropriate. However, because the available treatments for AUDs are not effective for everyone, more research is needed to develop novel and more efficacious treatments to address the range of AUD severity in diverse populations. Here we offer recommendations for the design and analysis of alcohol treatment trials, with a specific focus on the careful conduct of randomized clinical trials of medications and non-pharmacological interventions for AUDs. Methods Narrative review of the quality of published clinical trials and recommendations for the optimal design and analysis of treatment trials for AUDs. Results Despite considerable improvements in the design of alcohol clinical trials over the past two decades, many studies of AUD treatments have used faulty design features and statistical methods that are known to produce biased estimates of treatment efficacy. Conclusions The published statistical and methodological literatures provide clear guidance on methods to improve clinical trial design and analysis. Consistent use of state-of-the-art design features and analytic approaches will enhance the internal and external validity of treatment trials for AUDs across the spectrum of severity. The ultimate result of this attention to methodological rigor is that better treatment options will be identified for patients with an AUD. PMID:26250333

Automated Text Markup for Information Retrieval from an Electronic Textbook of Infectious Disease

PubMed Central

Berrios, Daniel C.; Kehler, Andrew; Kim, David K.; Yu, Victor L.; Fagan, Lawrence M.

1998-01-01

The information needs of practicing clinicians frequently require textbook or journal searches. Making these sources available in electronic form improves the speed of these searches, but precision (i.e., the fraction of relevant to total documents retrieved) remains low. Improving the traditional keyword search by transforming search terms into canonical concepts does not improve search precision greatly. Kim et al. have designed and built a prototype system (MYCIN II) for computer-based information retrieval from a forthcoming electronic textbook of infectious disease. The system requires manual indexing by experts in the form of complex text markup. However, this mark-up process is time consuming (about 3 person-hours to generate, review, and transcribe the index for each of 218 chapters). We have designed and implemented a system to semiautomate the markup process. The system, information extraction for semiautomated indexing of documents (ISAID), uses query models and existing information-extraction tools to provide support for any user, including the author of the source material, to mark up tertiary information sources quickly and accurately.

Banking: shop and compare.

PubMed

O'Brien, Jennifer A; DeJarnette, Sherry

2014-01-01

There are many reasons to take a critical look at the practice's banking relationship(s)--technology advancements, security measures, improvements in available services, recent banking enhancements designed specifically for medical practices, the impact of the financial crisis on bank ratings and stability, changing practice needs, opportunities for operational automation at the practice--and it is just simply smart to periodically evaluate and compare the features, pricing, and potential savings offered by vendors.

Deployable Fuel Cell Power Generator - Multi-Fuel Processor

DTIC Science & Technology

2009-02-01

and the system operating pressure, while the separation efficiency depends on the evaporator design. Desulfurizer – A flow-through gas -solid or gas ...meeting the Executive Order (EO) 13423 and the Energy Policy Act of 2005 to improve energy efficiency and reduce greenhouse gas emissions 3 percent...use available fuel such as natural gas (methane) or propane. The ability to reform multitude of fuels can accelerate the introduction of more

Designing Computer Agents With Facial Personality To Improve Human-Machine Collaboration

DTIC Science & Technology

2006-05-25

Francis Galton is credited with recognizing the fundamental lexical hypothesis which states that you can identify “the more conspicuous aspects of the...available to describe more important traits. Galton (1884) also surmised that although there are a thousand subtly unique words used to describe character...inconsistent. A hallmark of intelligence , what potentially separates human beings from earlier life forms, is the ability to think about future consequences

Improving Legacy Aircraft Systems Through Condition-Based Maintenance: An H-60 Case Study

DTIC Science & Technology

2014-09-01

level functions. These decompositions are equivalent to a detailed design effort in systems engineering. NAMPSOPs have a common architectural structure...Assembly Power Available Spindle Cables No.1 Engine Load Demand Spindle Control Cables Engine Pneumatic Starters Auxiliary Power Unit IRCM FLIR Mission...Analysis Fuel System Main Rotor Head Main Module Main Gear Box Radiator Engine Output Shaft Auxiliary Power Unit Flight Control Cables Tail Landing

Curriculum Development and Implementation of a National Interprofessional Fellowship in Patient Safety.

PubMed

Watts, Bradley V; Williams, Linda; Mills, Peter D; Paull, Douglas E; Cully, Jeffrey A; Gilman, Stuart C; Hemphill, Robin R

2018-06-15

Developing a workforce skilled in improving the safety of medical care has often been cited as an important means to achieve safer care. Although some educational programs geared toward patient safety have been developed, few advanced training programs have been described in the literature. We describe the development of a patient safety fellowship program. We describe the development and curriculum of an Interprofessional Fellowship in Patient Safety. The 1-year in residence fellowship focuses on domains such as leadership, spreading innovations, medical improvement, patient safety culture, reliability science, and understanding errors. Specific training in patient safety is available and has been delivered to 48 fellows from a wide range of backgrounds. Fellows have accomplished much in terms of improvement projects, educational innovations, and publications. After completing the fellowship program, fellows are obtaining positions within health-care quality and safety and are likely to make long-term contributions. We offer a curriculum and fellowship design for the topic of patient safety. Available evidence suggests that the fellowship results in the development of patient safety professionals.

The new NHGRI-EBI Catalog of published genome-wide association studies (GWAS Catalog).

PubMed

MacArthur, Jacqueline; Bowler, Emily; Cerezo, Maria; Gil, Laurent; Hall, Peggy; Hastings, Emma; Junkins, Heather; McMahon, Aoife; Milano, Annalisa; Morales, Joannella; Pendlington, Zoe May; Welter, Danielle; Burdett, Tony; Hindorff, Lucia; Flicek, Paul; Cunningham, Fiona; Parkinson, Helen

2017-01-04

The NHGRI-EBI GWAS Catalog has provided data from published genome-wide association studies since 2008. In 2015, the database was redesigned and relocated to EMBL-EBI. The new infrastructure includes a new graphical user interface (www.ebi.ac.uk/gwas/), ontology supported search functionality and an improved curation interface. These developments have improved the data release frequency by increasing automation of curation and providing scaling improvements. The range of available Catalog data has also been extended with structured ancestry and recruitment information added for all studies. The infrastructure improvements also support scaling for larger arrays, exome and sequencing studies, allowing the Catalog to adapt to the needs of evolving study design, genotyping technologies and user needs in the future. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Quasi-experimental study designs series-paper 8: identifying quasi-experimental studies to inform systematic reviews.

PubMed

Glanville, Julie; Eyers, John; Jones, Andrew M; Shemilt, Ian; Wang, Grace; Johansen, Marit; Fiander, Michelle; Rothstein, Hannah

2017-09-01

This article reviews the available evidence and guidance on methods to identify reports of quasi-experimental (QE) studies to inform systematic reviews of health care, public health, international development, education, crime and justice, and social welfare. Research, guidance, and examples of search strategies were identified by searching a range of databases, key guidance documents, selected reviews, conference proceedings, and personal communication. Current practice and research evidence were summarized. Four thousand nine hundred twenty-four records were retrieved by database searches, and additional documents were obtained by other searches. QE studies are challenging to identify efficiently because they have no standardized nomenclature and may be indexed in various ways. Reliable search filters are not available. There is a lack of specific resources devoted to collecting QE studies and little evidence on where best to search. Searches to identify QE studies should search a range of resources and, until indexing improves, use strategies that focus on the topic rather than the study design. Better definitions, better indexing in databases, prospective registers, and reporting guidance are required to improve the retrieval of QE studies and promote systematic reviews of what works based on the evidence from such studies. Copyright © 2017 Elsevier Inc. All rights reserved.

International Space Station Evolution Data Book. Volume 2; Evolution Concepts; Revised

NASA Technical Reports Server (NTRS)

Jorgensen, Catherine A. (Editor); Antol, Jeffrey (Technical Monitor)

2000-01-01

This report provides a focused and in-depth look at the opportunities and drivers for the enhancement and evolution of the International Space Station (ISS) during assembly and beyond the assembly complete stage. These enhancements would expand and improve the current baseline capabilities of the ISS and help to facilitate the commercialization of the ISS by the private sector. Volume 1 provides the consolidated overview of the ISS baseline systems; information on the current facilities available for pressurized and unpressurized payloads; and information on current plans for crew availability and utilization, resource timelines and margin summaries including power, thermal, and storage volumes; and an overview of the vehicle traffic model. Volume 2 includes discussions of advanced technologies being investigated for use on the ISS and potential commercial utilization activities being examined including proposed design reference missions (DRM's) and the technologies being assessed by the Pre-planned Program Improvement (P(sup 3) I) Working Group. This information is very high level and does not provide the relevant information necessary for detailed design efforts. This document is meant to educate readers on the ISS and to stimulate the generation of ideas for enhancement and utilization of the ISS, either by or for the government, academia, and commercial industry.

Evaluation of a program to increase evidence-based practice change.

PubMed

Larrabee, June H; Sions, Jacqueline; Fanning, Mary; Withrow, Mary Lynne; Ferretti, Andrea

2007-06-01

The study evaluated a nursing research program designed to achieve systematic evidence-based practice change. Specifically, change in nurse attitudes about use of research and research conduct, practice change projects, and nurse participation in research-related activities were evaluated. Evidence indicates that successful evidence-based practice change in an organization requires senior leadership support and a systematic program for practice change. Evaluation of program effectiveness provides evidence about opportunities for further improvement. Quantitative evaluation used a pretest-posttest design. The site was an academic medical center in rural West Virginia. Participants were registered nurses from all inpatients units, perioperative services, and emergency departments. Surveys used Alcock et al's Staff Nurses and Research Activities scale. Descriptive evaluation included the number of nurses who attended the workshop, practice change projects, scholarly products disseminated, and outcome of a Magnet review. First, knowledge about the availability of support services increased between 1999 and 2002 and was associated with higher attitude scores about research and research utilization. Second, registered nurses who reported participating in research-related activities had more positive scores on all attitudes than registered nurses who reported not participating. Nurse leaders may improve participation and attitudes about research and research utilization by internally marketing the support available for research-related activities.

Determining customer satisfaction in anatomic pathology.

PubMed

Zarbo, Richard J

2006-05-01

Measurement of physicians' and patients' satisfaction with laboratory services has become a standard practice in the United States, prompted by national accreditation requirements. Unlike other surveys of hospital-, outpatient care-, or physician-related activities, no ongoing, comprehensive customer satisfaction survey of anatomic pathology services is available for subscription that would allow continual benchmarking against peer laboratories. Pathologists, therefore, must often design their own local assessment tools to determine physician satisfaction in anatomic pathology. To describe satisfaction survey design that would elicit specific information from physician customers about key elements of anatomic pathology services. The author shares his experience in biannually assessing customer satisfaction in anatomic pathology with survey tools designed at the Henry Ford Hospital, Detroit, Mich. Benchmarks for physician satisfaction, opportunities for improvement, and characteristics that correlated with a high level of physician satisfaction were identified nationally from a standardized survey tool used by 94 laboratories in the 2001 College of American Pathologists Q-Probes quality improvement program. In general, physicians are most satisfied with professional diagnostic services and least satisfied with pathology services related to poor communication. A well-designed and conducted customer satisfaction survey is an opportunity for pathologists to periodically educate physician customers about services offered, manage unrealistic expectations, and understand the evolving needs of the physician customer. Armed with current information from physician customers, the pathologist is better able to strategically plan for resources that facilitate performance improvements in anatomic pathology laboratory services that align with evolving clinical needs in health care delivery.

Efficient Design in a DC to DC Converter Unit

NASA Technical Reports Server (NTRS)

Bruemmer, Joel E.; Williams, Fitch R.; Schmitz, Gregory V.

2002-01-01

Space Flight hardware requires high power conversion efficiencies due to limited power availability and weight penalties of cooling systems. The International Space Station (ISS) Electric Power System (EPS) DC-DC Converter Unit (DDCU) power converter is no exception. This paper explores the design methods and tradeoffs that were utilized to accomplish high efficiency in the DDCU. An isolating DC to DC converter was selected for the ISS power system because of requirements for separate primary and secondary grounds and for a well-regulated secondary output voltage derived from a widely varying input voltage. A flyback-current-fed push-pull topology or improved Weinberg circuit was chosen for this converter because of its potential for high efficiency and reliability. To enhance efficiency, a non-dissipative snubber circuit for the very-low-Rds-on Field Effect Transistors (FETs) was utilized, redistributing the energy that could be wasted during the switching cycle of the power FETs. A unique, low-impedance connection system was utilized to improve contact resistance over a bolted connection. For improved consistency in performance and to lower internal wiring inductance and losses a planar bus system is employed. All of these choices contributed to the design of a 6.25 KW regulated dc to dc converter that is 95 percent efficient. The methodology used in the design of this DC to DC Converter Unit may be directly applicable to other systems that require a conservative approach to efficient power conversion and distribution.

Fault Management Design Strategies

NASA Technical Reports Server (NTRS)

Day, John C.; Johnson, Stephen B.

2014-01-01

Development of dependable systems relies on the ability of the system to determine and respond to off-nominal system behavior. Specification and development of these fault management capabilities must be done in a structured and principled manner to improve our understanding of these systems, and to make significant gains in dependability (safety, reliability and availability). Prior work has described a fundamental taxonomy and theory of System Health Management (SHM), and of its operational subset, Fault Management (FM). This conceptual foundation provides a basis to develop framework to design and implement FM design strategies that protect mission objectives and account for system design limitations. Selection of an SHM strategy has implications for the functions required to perform the strategy, and it places constraints on the set of possible design solutions. The framework developed in this paper provides a rigorous and principled approach to classifying SHM strategies, as well as methods for determination and implementation of SHM strategies. An illustrative example is used to describe the application of the framework and the resulting benefits to system and FM design and dependability.

Building capacity for evidence generation, synthesis and implementation to improve the care of mothers and babies in South East Asia: methods and design of the SEA-ORCHID Project using a logical framework approach.

PubMed

McDonald, Steve; Turner, Tari; Chamberlain, Catherine; Lumbiganon, Pisake; Thinkhamrop, Jadsada; Festin, Mario R; Ho, Jacqueline J; Mohammad, Hakimi; Henderson-Smart, David J; Short, Jacki; Crowther, Caroline A; Martis, Ruth; Green, Sally

2010-07-01

Rates of maternal and perinatal mortality remain high in developing countries despite the existence of effective interventions. Efforts to strengthen evidence-based approaches to improve health in these settings are partly hindered by restricted access to the best available evidence, limited training in evidence-based practice and concerns about the relevance of existing evidence. South East Asia--Optimising Reproductive and Child Health in Developing Countries (SEA-ORCHID) was a five-year project that aimed to determine whether a multifaceted intervention designed to strengthen the capacity for research synthesis, evidence-based care and knowledge implementation improved clinical practice and led to better health outcomes for mothers and babies. This paper describes the development and design of the SEA-ORCHID intervention plan using a logical framework approach. SEA-ORCHID used a before-and-after design to evaluate the impact of a multifaceted tailored intervention at nine sites across Thailand, Malaysia, Philippines and Indonesia, supported by three centres in Australia. We used a logical framework approach to systematically prepare and summarise the project plan in a clear and logical way. The development and design of the SEA-ORCHID project was based around the three components of a logical framework (problem analysis, project plan and evaluation strategy). The SEA-ORCHID logical framework defined the project's goal and purpose (To improve the health of mothers and babies in South East Asia and To improve clinical practice in reproductive health in South East Asia), and outlined a series of project objectives and activities designed to achieve these. The logical framework also established outcome and process measures appropriate to each level of the project plan, and guided project work in each of the participating countries and hospitals. Development of a logical framework in the SEA-ORCHID project enabled a reasoned, logical approach to the project design that ensured the project activities would achieve the desired outcomes and that the evaluation plan would assess both the process and outcome of the project. The logical framework was also valuable over the course of the project to facilitate communication, assess progress and build a shared understanding of the project activities, purpose and goal.

Building capacity for evidence generation, synthesis and implementation to improve the care of mothers and babies in South East Asia: methods and design of the SEA-ORCHID Project using a logical framework approach

PubMed Central

2010-01-01

Background Rates of maternal and perinatal mortality remain high in developing countries despite the existence of effective interventions. Efforts to strengthen evidence-based approaches to improve health in these settings are partly hindered by restricted access to the best available evidence, limited training in evidence-based practice and concerns about the relevance of existing evidence. South East Asia - Optimising Reproductive and Child Health in Developing Countries (SEA-ORCHID) was a five-year project that aimed to determine whether a multifaceted intervention designed to strengthen the capacity for research synthesis, evidence-based care and knowledge implementation improved clinical practice and led to better health outcomes for mothers and babies. This paper describes the development and design of the SEA-ORCHID intervention plan using a logical framework approach. Methods SEA-ORCHID used a before-and-after design to evaluate the impact of a multifaceted tailored intervention at nine sites across Thailand, Malaysia, Philippines and Indonesia, supported by three centres in Australia. We used a logical framework approach to systematically prepare and summarise the project plan in a clear and logical way. The development and design of the SEA-ORCHID project was based around the three components of a logical framework (problem analysis, project plan and evaluation strategy). Results The SEA-ORCHID logical framework defined the project's goal and purpose (To improve the health of mothers and babies in South East Asia and To improve clinical practice in reproductive health in South East Asia), and outlined a series of project objectives and activities designed to achieve these. The logical framework also established outcome and process measures appropriate to each level of the project plan, and guided project work in each of the participating countries and hospitals. Conclusions Development of a logical framework in the SEA-ORCHID project enabled a reasoned, logical approach to the project design that ensured the project activities would achieve the desired outcomes and that the evaluation plan would assess both the process and outcome of the project. The logical framework was also valuable over the course of the project to facilitate communication, assess progress and build a shared understanding of the project activities, purpose and goal. PMID:20594325

Hyperswitch Communication Network Computer

NASA Technical Reports Server (NTRS)

Peterson, John C.; Chow, Edward T.; Priel, Moshe; Upchurch, Edwin T.

1993-01-01

Hyperswitch Communications Network (HCN) computer is prototype multiple-processor computer being developed. Incorporates improved version of hyperswitch communication network described in "Hyperswitch Network For Hypercube Computer" (NPO-16905). Designed to support high-level software and expansion of itself. HCN computer is message-passing, multiple-instruction/multiple-data computer offering significant advantages over older single-processor and bus-based multiple-processor computers, with respect to price/performance ratio, reliability, availability, and manufacturing. Design of HCN operating-system software provides flexible computing environment accommodating both parallel and distributed processing. Also achieves balance among following competing factors; performance in processing and communications, ease of use, and tolerance of (and recovery from) faults.

Recent "Ground Testing" Experiences in the National Full-Scale Aerodynamics Complex

NASA Technical Reports Server (NTRS)

Zell, Peter; Stich, Phil; Sverdrup, Jacobs; George, M. W. (Technical Monitor)

2002-01-01

The large test sections of the National Full-scale Aerodynamics Complex (NFAC) wind tunnels provide ideal controlled wind environments to test ground-based objects and vehicles. Though this facility was designed and provisioned primarily for aeronautical testing requirements, several experiments have been designed to utilize existing model mount structures to support "non-flying" systems. This presentation will discuss some of the ground-based testing capabilities of the facility and provide examples of groundbased tests conducted in the facility to date. It will also address some future work envisioned and solicit input from the SATA membership on ways to improve the service that NASA makes available to customers.

Aerodynamic analysis of Pegasus - Computations vs reality

NASA Technical Reports Server (NTRS)

Mendenhall, Michael R.; Lesieutre, Daniel J.; Whittaker, C. H.; Curry, Robert E.; Moulton, Bryan

1993-01-01

Pegasus, a three-stage, air-launched, winged space booster was developed to provide fast and efficient commercial launch services for small satellites. The aerodynamic design and analysis of Pegasus was conducted without benefit of wind tunnel tests using only computational aerodynamic and fluid dynamic methods. Flight test data from the first two operational flights of Pegasus are now available, and they provide an opportunity to validate the accuracy of the predicted pre-flight aerodynamic characteristics. Comparisons of measured and predicted flight characteristics are presented and discussed. Results show that the computational methods provide reasonable aerodynamic design information with acceptable margins. Post-flight analyses illustrate certain areas in which improvements are desired.

Robotics in Arthroplasty: A Comprehensive Review.

PubMed

Jacofsky, David J; Allen, Mark

2016-10-01

Robotic-assisted orthopedic surgery has been available clinically in some form for over 2 decades, claiming to improve total joint arthroplasty by enhancing the surgeon's ability to reproduce alignment and therefore better restore normal kinematics. Various current systems include a robotic arm, robotic-guided cutting jigs, and robotic milling systems with a diversity of different navigation strategies using active, semiactive, or passive control systems. Semiactive systems have become dominant, providing a haptic window through which the surgeon is able to consistently prepare an arthroplasty based on preoperative planning. A review of previous designs and clinical studies demonstrate that these robotic systems decrease variability and increase precision, primarily focusing on component positioning and alignment. Some early clinical results indicate decreased revision rates and improved patient satisfaction with robotic-assisted arthroplasty. The future design objectives include precise planning and even further improved consistent intraoperative execution. Despite this cautious optimism, many still wonder whether robotics will ultimately increase cost and operative time without objectively improving outcomes. Over the long term, every industry that has seen robotic technology be introduced, ultimately has shown an increase in production capacity, improved accuracy and precision, and lower cost. A new generation of robotic systems is now being introduced into the arthroplasty arena, and early results with unicompartmental knee arthroplasty and total hip arthroplasty have demonstrated improved accuracy of placement, improved satisfaction, and reduced complications. Further studies are needed to confirm the cost effectiveness of these technologies. Copyright © 2016 Elsevier Inc. All rights reserved.

Improved imputation accuracy in Hispanic/Latino populations with larger and more diverse reference panels: applications in the Hispanic Community Health Study/Study of Latinos (HCHS/SOL)

PubMed Central

Nelson, Sarah C.; Stilp, Adrienne M.; Papanicolaou, George J.; Taylor, Kent D.; Rotter, Jerome I.; Thornton, Timothy A.; Laurie, Cathy C.

2016-01-01

Imputation is commonly used in genome-wide association studies to expand the set of genetic variants available for analysis. Larger and more diverse reference panels, such as the final Phase 3 of the 1000 Genomes Project, hold promise for improving imputation accuracy in genetically diverse populations such as Hispanics/Latinos in the USA. Here, we sought to empirically evaluate imputation accuracy when imputing to a 1000 Genomes Phase 3 versus a Phase 1 reference, using participants from the Hispanic Community Health Study/Study of Latinos. Our assessments included calculating the correlation between imputed and observed allelic dosage in a subset of samples genotyped on a supplemental array. We observed that the Phase 3 reference yielded higher accuracy at rare variants, but that the two reference panels were comparable at common variants. At a sample level, the Phase 3 reference improved imputation accuracy in Hispanic/Latino samples from the Caribbean more than for Mainland samples, which we attribute primarily to the additional reference panel samples available in Phase 3. We conclude that a 1000 Genomes Project Phase 3 reference panel can yield improved imputation accuracy compared with Phase 1, particularly for rare variants and for samples of certain genetic ancestry compositions. Our findings can inform imputation design for other genome-wide association studies of participants with diverse ancestries, especially as larger and more diverse reference panels continue to become available. PMID:27346520

Social and behavioral interventions for improving quality of life of HIV infected people receiving antiretroviral therapy: a systematic review and meta-analysis.

PubMed

Bhatta, Dharma Nand; Liabsuetrakul, Tippawan; McNeil, Edward B

2017-04-24

Improvement in quality of life is crucial for HIV infected people. Social and behavioral interventions have been implemented in different contexts to improve the quality of life among HIV infected people. This review appraises the evidence for available interventions that focused on quality of life of HIV infected people receiving antiretroviral therapy (ART). We searched electronic databases for randomized controlled trials of interventions to improve the quality of life of HIV infected people receiving ART. We searched PUBMED and the Cochrane Centre Register of Controlled Trials (CENTRAL) with the terms "social", "behavioral", "educational", "quality of life", "HIV", and "RCT". Searches were conducted for articles published from 1980 to December 16, 2015. Standardized data abstraction methods and searching steps were applied. Twenty-eight studies reported the impact of social or behavioral interventions in quality of life among HIV infected people, of which 15 were conducted in United States of America. A total of 4136 participants were enrolled. Of the 28 studies, four studies included females, two studies included males and remaining studies excluded both males and females. The overall reported methodological quality of the studies was subject to a high risk of bias and the study criteria were unclear in most studies. Twenty-one studies reported a significant intervention effect on at least one quality of life domain. Meta-analyses showed significant improvement in general health, mental health, physical function and environment domains of quality of life among intervention groups. However, the expected impact of the intervention was low to moderate because the rigorousness of the studies was low, information was limited, the sample sizes were small and other the quality of the study designs were poor. Although the available evidence suggests that existing social and behavioral interventions can improve some quality of life domains, the quality of evidence was insufficient to support the notion that these interventions can improve the overall quality of life of HIV infected people receiving ART. Well-designed and rigorous randomized controlled trials with high methodological quality are required.

Knowledge, attitude and practices for design for safety: A study on civil & structural engineers.

PubMed

Goh, Yang Miang; Chua, Sijie

2016-08-01

Design for safety (DfS) (also known as prevention through design, safe design and Construction (Design and Management)) promotes early consideration of safety and health hazards during the design phase of a construction project. With early intervention, hazards can be more effectively eliminated or controlled leading to safer worksites and construction processes. DfS is practiced in many countries, including Australia, the UK, and Singapore. In Singapore, the Manpower Ministry enacted the DfS Regulations in July 2015, which will be enforced from August 2016 onwards. Due to the critical role of civil and structural (C&S) engineers during design and construction, the DfS knowledge, attitude and practices (KAP) of C&S engineers have significant impact on the successful implementation of DfS. Thus, this study aims to explore the DfS KAP of C&S engineers so as to guide further research in measuring and improving DfS KAP of designers. During the study, it was found that there is a lack of KAP studies in construction management. Therefore, this study also aims to provide useful lessons for future applications of the KAP framework in construction management research. A questionnaire was developed to assess the DfS KAP of C&S engineers. The responses provided by 43 C&S engineers were analyzed. In addition, interviews with experienced construction professionals were carried out to further understand perceptions of DfS and related issues. The results suggest that C&S engineers are supportive of DfS, but the level of DfS knowledge and practices need to be improved. More DfS guidelines and training should be made available to the engineers. To ensure that DfS can be implemented successfully, there is a need to study the contractual arrangements between clients and designers and the effectiveness of different implementation approaches for the DfS process. The questionnaire and findings in this study provided the foundation for a baseline survey with larger sample size, which is currently being planned. In contrast to earlier studies, the study showed that the responding C&S engineers were supportive of the DfS. The study showed that the key to improving the DfS KAP of C&S engineers is by improving clients' motivation for DfS. Copyright © 2015 Elsevier Ltd. All rights reserved.

Simple, low-noise piezo driver with feed-forward for broad tuning of external cavity diode lasers.

PubMed

Doret, S Charles

2018-02-01

We present an inexpensive, low-noise (<260 μV rms , 0.1 Hz-100 kHz) design for a piezo driver suitable for frequency tuning of external-cavity diode lasers. This simple driver improves upon many commercially available drivers by incorporating circuitry to produce a "feed-forward" signal appropriate for making simultaneous adjustments to the piezo voltage and laser current, enabling dramatic improvements in a mode-hop-free laser frequency tuning range. We present the theory behind our driver's operation, characterize its output noise, and demonstrate its use in absorption spectroscopy on the rubidium D 1 line.

What we have learned: the impact of quality from a clinical trials perspective

PubMed Central

FitzGerald, T. J.

2011-01-01

In this review article we address the radiation oncology process improvements in clinical trials and review how these changes improve the quality for the next generation of trials. In recent years we have progressed from a time of limited data acquisition to the present in which we have real time influence of clinical trials quality. This enables immediate availability of the important elements including staging, eligibility, response and outcome for all trial investigators. Modern informatics platforms are well designed for future adaptive clinical trials. We review what will be needed in the informatics architecture of current and future clinical trials. PMID:22177875

Fused deposition of ceramics: A comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design

NASA Astrophysics Data System (ADS)

Bellini, Anna

Customer-driven product customization and continued demand for cost and time savings have generated a renewed interest in agile manufacturing based on improvements on Rapid Prototyping (RP) technologies. The advantages of RP technologies are: (1) ability to shorten the product design and development time, (2) suitability for automation and decrease in the level of human intervention, (3) ability to build many geometrically complex shapes. A shift from "prototyping" to "manufacturing" necessitates the following improvements: (1) Flexibility in choice of materials; (2) Part integrity and built-in characteristics to meet performance requirements; (3) Dimensional stability and tolerances; (4) Improved surface finish. A project funded by ONR has been undertaken to develop an agile manufacturing technology for fabrication of ceramic and multi-component parts to meet various needs of the Navy, such as transducers, etc. The project is based on adaptation of a layered manufacturing concept since the program required that the new technology be developed based on a commercially available RP technology. Among various RP technologies available today, Fused Deposition Modeling (FDM) has been identified as the focus of this research because of its potential versatility in the choice of materials and deposition configuration. This innovative approach allows for designing and implementing highly complex internal architectures into parts through deposition of different materials in a variety of configurations in such a way that the finished product exhibit characteristics to meet the performance requirements. This implies that, in principle, one can tailor-make the assemble of materials and structures as per specifications of an optimum design. The program objectives can be achieved only through accurate process modeling and modeling of material behavior. Oftentimes, process modeling is based on some type of computational approach where as modeling of material behavior is based on extensive experimental investigations. Studies are conducted in the following categories: (1) Flow modeling during extrusion and deposition; (2) Thermal modeling; (3) Flow control during deposition; (4) Product characterization and property determination for dimensional analysis; (5) Development of a novel technology based on a mini-extrusion system. Studies in each of these stages have involved experimental as well as analytical approaches to develop a comprehensive modeling.

Petascale Computing for Ground-Based Solar Physics with the DKIST Data Center

NASA Astrophysics Data System (ADS)

Berukoff, Steven J.; Hays, Tony; Reardon, Kevin P.; Spiess, DJ; Watson, Fraser; Wiant, Scott

2016-05-01

When construction is complete in 2019, the Daniel K. Inouye Solar Telescope will be the most-capable large aperture, high-resolution, multi-instrument solar physics facility in the world. The telescope is designed as a four-meter off-axis Gregorian, with a rotating Coude laboratory designed to simultaneously house and support five first-light imaging and spectropolarimetric instruments. At current design, the facility and its instruments will generate data volumes of 3 PB per year, and produce 107-109 metadata elements.The DKIST Data Center is being designed to store, curate, and process this flood of information, while providing association of science data and metadata to its acquisition and processing provenance. The Data Center will produce quality-controlled calibrated data sets, and make them available freely and openly through modern search interfaces and APIs. Documented software and algorithms will also be made available through community repositories like Github for further collaboration and improvement.We discuss the current design and approach of the DKIST Data Center, describing the development cycle, early technology analysis and prototyping, and the roadmap ahead. We discuss our iterative development approach, the underappreciated challenges of calibrating ground-based solar data, the crucial integration of the Data Center within the larger Operations lifecycle, and how software and hardware support, intelligently deployed, will enable high-caliber solar physics research and community growth for the DKIST's 40-year lifespan.

Reliability and Maintainability Analysis of a High Air Pressure Compressor Facility

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Ring, Robert W.; Cole, Stuart K.

2013-01-01

This paper discusses a Reliability, Availability, and Maintainability (RAM) independent assessment conducted to support the refurbishment of the Compressor Station at the NASA Langley Research Center (LaRC). The paper discusses the methodologies used by the assessment team to derive the repair by replacement (RR) strategies to improve the reliability and availability of the Compressor Station (Ref.1). This includes a RAPTOR simulation model that was used to generate the statistical data analysis needed to derive a 15-year investment plan to support the refurbishment of the facility. To summarize, study results clearly indicate that the air compressors are well past their design life. The major failures of Compressors indicate that significant latent failure causes are present. Given the occurrence of these high-cost failures following compressor overhauls, future major failures should be anticipated if compressors are not replaced. Given the results from the RR analysis, the study team recommended a compressor replacement strategy. Based on the data analysis, the RR strategy will lead to sustainable operations through significant improvements in reliability, availability, and the probability of meeting the air demand with acceptable investment cost that should translate, in the long run, into major cost savings. For example, the probability of meeting air demand improved from 79.7 percent for the Base Case to 97.3 percent. Expressed in terms of a reduction in the probability of failing to meet demand (1 in 5 days to 1 in 37 days), the improvement is about 700 percent. Similarly, compressor replacement improved the operational availability of the facility from 97.5 percent to 99.8 percent. Expressed in terms of a reduction in system unavailability (1 in 40 to 1 in 500), the improvement is better than 1000 percent (an order of magnitude improvement). It is worthy to note that the methodologies, tools, and techniques used in the LaRC study can be used to evaluate similar high value equipment components and facilities. Also, lessons learned in data collection and maintenance practices derived from the observations, findings, and recommendations of the study are extremely important in the evaluation and sustainment of new compressor facilities.

A New Design for Airway Management Training with Mixed Reality and High Fidelity Modeling.

PubMed

Shen, Yunhe; Hananel, David; Zhao, Zichen; Burke, Daniel; Ballas, Crist; Norfleet, Jack; Reihsen, Troy; Sweet, Robert

2016-01-01

Restoring airway function is a vital task in many medical scenarios. Although various simulation tools have been available for learning such skills, recent research indicated that fidelity in simulating airway management deserves further improvements. In this study, we designed and implemented a new prototype for practicing relevant tasks including laryngoscopy, intubation and cricothyrotomy. A large amount of anatomical details or landmarks were meticulously selected and reconstructed from medical scans, and 3D-printed or molded to the airway intervention model. This training model was augmented by virtually and physically presented interactive modules, which are interoperable with motion tracking and sensor data feedback. Implementation results showed that this design is a feasible approach to develop higher fidelity airway models that can be integrated with mixed reality interfaces.

Design and manufacturing challenges of optogenetic neural interfaces: a review

NASA Astrophysics Data System (ADS)

Goncalves, S. B.; Ribeiro, J. F.; Silva, A. F.; Costa, R. M.; Correia, J. H.

2017-08-01

Optogenetics is a relatively new technology to achieve cell-type specific neuromodulation with millisecond-scale temporal precision. Optogenetic tools are being developed to address neuroscience challenges, and to improve the knowledge about brain networks, with the ultimate aim of catalyzing new treatments for brain disorders and diseases. To reach this ambitious goal the implementation of mature and reliable engineered tools is required. The success of optogenetics relies on optical tools that can deliver light into the neural tissue. Objective/Approach: Here, the design and manufacturing approaches available to the scientific community are reviewed, and current challenges to accomplish appropriate scalable, multimodal and wireless optical devices are discussed. Significance: Overall, this review aims at presenting a helpful guidance to the engineering and design of optical microsystems for optogenetic applications.

Active video gaming to improve balance in the elderly.

PubMed

Lamoth, Claudine J C; Caljouw, Simone R; Postema, Klaas

2011-01-01

The combination of active video gaming and exercise (exergaming) is suggested to improve elderly people's balance, thereby decreasing fall risk. Exergaming has been shown to increase motivation during exercise therapy, due to the enjoyable and challenging nature, which could support long-term adherence for exercising balance. However, scarce evidence is available of the direct effects of exergaming on postural control. Therefore, the aim of the study was to assess the effect of a six-week videogame-based exercise program aimed at improving balance in elderly people. Task performance and postural control were examined using an interrupted time series design. Results of multilevel analyses showed that performance on the dot task improved within the first two weeks of training. Postural control improved during the intervention. After the intervention period task performance and balance were better than before the intervention. Results of this study show that healthy elderly can benefit from a videogame-based exercise program to improve balance and that all subjects were highly motivated to exercise balance because they found gaming challenging and enjoyable.

Intervention to improve social and family support for caregivers of dependent patients: ICIAS study protocol

PubMed Central

2014-01-01

Background Despite the existence of formal professional support services, informal support (mainly family members) continues to be the main source of eldercare, especially for those who are dependent or disabled. Professionals on the primary health care are the ideal choice to educate, provide psychological support, and help to mobilize social resources available to the informal caregiver. Controversy remains concerning the efficiency of multiple interventions, taking a holistic approach to both the patient and caregiver, and optimum utilization of the available community resources. .For this reason our goal is to assess whether an intervention designed to improve the social support for caregivers effectively decreases caregivers burden and improves their quality of life. Methods/design Design: Controlled, multicentre, community intervention trial, with patients and their caregivers randomized to the intervention or control group according to their assigned Primary Health Care Team (PHCT). Study area: Primary Health Care network (9 PHCTs). Study participants: Primary informal caregivers of patients receiving home health care from participating PHCTs. Sample: Required sample size is 282 caregivers (141 from PHCTs randomized to the intervention group and 141 from PHCTs randomized to the control group. Intervention: a) PHCT professionals: standardized training to implement caregivers intervention. b) Caregivers: 1 individualized counselling session, 1 family session, and 4 educational group sessions conducted by participating PHCT professionals; in addition to usual home health care visits, periodic telephone follow-up contact and unlimited telephone support. Control: Caregivers and dependent patients: usual home health care, consisting of bimonthly scheduled visits, follow-up as needed, and additional attention upon request. Data analysis Dependent variables: Caregiver burden (short-form Zarit test), caregivers’ social support (Medical Outcomes Study), and caregivers’ reported quality of life (SF-12) Independent variables: a) Caregiver: sociodemographic data, Goldberg Scale, Apgar family questionnaire, Holmes and Rahe Psychosocial Stress Scale, number of chronic diseases. b) Dependent patient: sociodemographic data, level of dependency (Barthel Index), cognitive impairment (Pfeiffer test). Discussion If the intervention intended to improve social and family support is effective in reducing the burden on primary informal caregivers of dependent patients, this model can be readily applied throughout usual PHCT clinical practice. Trial registration Clinical trials registrar: NCT02065427 PMID:24666438

The design and delivery of crew resource management training: exploiting available resources.

PubMed

Salas, E; Rhodenizer, L; Bowers, C A

2000-01-01

Despite widespread acceptance throughout commercial and military settings, crew resource management (CRM) training programs have not escaped doubts about their effectiveness. The current state of CRM training is an example of how an entire body of pertinent research and development has not had the impact on practice that it could. In this paper we outline additional resources (i.e., principles, information, findings, and guidelines) from the team training and training effectiveness research literatures that can be used to improve the design and delivery of CRM training. Some of the resources discussed include knowledge about training effectiveness, training teamwork-related skills, scenario design, and performance measurement. We conclude with a discussion of emerging resources as well as those that need to be developed. The purpose of this paper is to provide the CRM training developer with better access to resources that can be applied to the design and delivery of CRM training programs.

PsyGlass: Capitalizing on Google Glass for naturalistic data collection.

PubMed

Paxton, Alexandra; Rodriguez, Kevin; Dale, Rick

2015-09-01

As commercial technology moves further into wearable technologies, cognitive and psychological scientists can capitalize on these devices to facilitate naturalistic research designs while still maintaining strong experimental control. One such wearable technology is Google Glass (Google, Inc.: www.google.com/glass), which can present wearers with audio and visual stimuli while tracking a host of multimodal data. In this article, we introduce PsyGlass, a framework for incorporating Google Glass into experimental work that is freely available for download and community improvement over time (www.github.com/a-paxton/PsyGlass). As a proof of concept, we use this framework to investigate dual-task pressures on naturalistic interaction. The preliminary study demonstrates how designs from classic experimental psychology may be integrated in naturalistic interactive designs with emerging technologies. We close with a series of recommendations for using PsyGlass and a discussion of how wearable technology more broadly may contribute to new or adapted naturalistic research designs.

Design of a new nozzle for direct current plasma guns with improved spraying parameters

NASA Astrophysics Data System (ADS)

Jankovic, M.; Mostaghimi, J.; Pershin, V.

2000-03-01

A new design is proposed for direct current plasma spray gas-shroud attachments. It has curvilinearly shaped internal walls aimed toward elimination of the cold air entrainment, recorded for commercially available conical designs of the shrouded nozzle. The curvilinear nozzle design was tested; it proved to be capable of withstanding high plasma temperatures and enabled satisfactory particle injection. Parallel measurements with an enthalpy probe were performed on the jet emerging from two different nozzles. Also, corresponding calculations were made to predict the plasma flow parameters and the particle parameters. Adequate spray tests were performed by spraying iron-aluminum and MCrAlY coatings onto stainless steel substrates. Coating analyses were performed, and coating qualities, such as microstructure, open porosity, and adhesion strength, were determined. The results indicate that the coatings sprayed with a curvilinear nozzle exhibited lower porosity, higher adhesion strength, and an enhanced microstructure.

Contact mechanics of reverse engineered distal humeral hemiarthroplasty implants.

PubMed

Willing, Ryan; King, Graham J W; Johnson, James A

2015-11-26

Erosion of articular cartilage is a concern following distal humeral hemiarthroplasty, because native cartilage surfaces are placed in contact with stiff metallic implant components, which causes decreases in contact area and increases in contact stresses. Recently, reverse engineered implants have been proposed which are intended to promote more natural contact mechanics by reproducing the native bone or cartilage shape. In this study, finite element modeling is used in order to calculate changes in cartilage contact areas and stresses following distal humeral hemiarthroplasty with commercially available and reverse engineered implant designs. At the ulna, decreases in contact area were -34±3% (p=0.002), -27±1% (p<0.001) and -14±2% (p=0.008) using commercially available, bone reverse engineered and cartilage reverse engineered designs, respectively. Peak contact stresses increased by 461±57% (p=0.008), 387±127% (p=0.229) and 165±16% (p=0.003). At the radius, decreases in contact area were -21±3% (p=0.013), -13±2% (p<0.006) and -6±1% (p=0.020), and peak contact stresses increased by 75±52% (p>0.999), 241±32% (p=0.010) and 61±10% (p=0.021). Between the three different implant designs, the cartilage reverse engineered design yielded the largest contact areas and lowest contact stresses, but was still unable to reproduce the contact mechanics of the native joint. These findings align with a growing body of evidence indicating that although reverse engineered hemiarthroplasty implants can provide small improvements in contact mechanics when compared with commercially available designs, further optimization of shape and material properties is required in order reproduce native joint contact mechanics. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design and implementation of an integrated, continuous evaluation, and quality improvement system for a state-based home-visiting program.

PubMed

McCabe, Bridget K; Potash, Dru; Omohundro, Ellen; Taylor, Cathy R

2012-10-01

To describe the design and implementation of an evaluation system to facilitate continuous quality improvement (CQI) and scientific evaluation in a statewide home visiting program, and to provide a summary of the system's progress in meeting intended outputs and short-term outcomes. Help Us Grow Successfully (HUGS) is a statewide home visiting program that provides services to at-risk pregnant/post-partum women, children (0-5 years), and their families. The program goals are to improve parenting skills and connect families to needed services and thus improve the health of the service population. The evaluation system is designed to: (1) integrate evaluation into daily workflow; (2) utilize standardized screening and evaluation tools; (3) facilitate a culture of CQI in program management; and, (4) facilitate scientifically rigorous evaluations. The review of the system's design and implementation occurred through a formative evaluation process (reach, dose, and fidelity). Data was collected through electronic and paper surveys, administrative data, and notes from management meetings, and medical chart review. In the design phase, four process and forty outcome measures were selected and are tracked using standardized screening and monitoring tools. During implementation, the reach and dose of training were adequate to successfully launch the evaluation/CQI system. All staff (n = 165) use the system for management of families; the supervisors (n = 18) use the system to track routine program activities. Data quality and availability is sufficient to support periodic program reviews at the region and state level. In the first 7 months, the HUGS evaluation system tracked 3,794 families (7,937 individuals). System use and acceptance is high. A successful implementation of a structured evaluation system with a strong CQI component is feasible in an existing, large statewide program. The evaluation/CQI system is an effective mechanism to drive modest change in management of the program.

Preliminary design notes on a low F-number EMR

NASA Technical Reports Server (NTRS)

Mihora, D. J.

1982-01-01

Conceptual design studies were completed on a new Electrostatic Membrane Reflector, EMR. This new model incorporates both a preformed, curved membrane reflector and membrane control surface. This improved model is the second step toward a high precision large space antenna that could eventually exhibit a performance in terms of aperture diameter to surface quality exceeding 1,000,000. Design trades indicate that the goal of a low ratio of focal length to aperture diameter (f sub n) can be achieved while operating in a humid sea-level environment. A nominal surface quality of 1.0 mm (RMS) is possible using available off-the-shelf commercial membranes. Both the membrane reflector and control electrode surface are fabricated from 12 gore segments and attached to the available 12 sided, 4.88 m diameter rim. The preferred conceptual design has a f sub n = 1.0. The 4.88 m aperture is performed with a centerline displacement of 0.306 m. The nominal spacing between the membrane reflector and the electrode control surface is 50.8 mm. The centerline membrane displacement from its performed to its tensioned, smooth shape is about 3 mm. The membrane tensioning is achieved by application of an electrostatic pressure of 2.6 N/sq cm and a voltage of about 38 kV.

Statistical modeling of isoform splicing dynamics from RNA-seq time series data.

PubMed

Huang, Yuanhua; Sanguinetti, Guido

2016-10-01

Isoform quantification is an important goal of RNA-seq experiments, yet it remains problematic for genes with low expression or several isoforms. These difficulties may in principle be ameliorated by exploiting correlated experimental designs, such as time series or dosage response experiments. Time series RNA-seq experiments, in particular, are becoming increasingly popular, yet there are no methods that explicitly leverage the experimental design to improve isoform quantification. Here, we present DICEseq, the first isoform quantification method tailored to correlated RNA-seq experiments. DICEseq explicitly models the correlations between different RNA-seq experiments to aid the quantification of isoforms across experiments. Numerical experiments on simulated datasets show that DICEseq yields more accurate results than state-of-the-art methods, an advantage that can become considerable at low coverage levels. On real datasets, our results show that DICEseq provides substantially more reproducible and robust quantifications, increasing the correlation of estimates from replicate datasets by up to 10% on genes with low or moderate expression levels (bottom third of all genes). Furthermore, DICEseq permits to quantify the trade-off between temporal sampling of RNA and depth of sequencing, frequently an important choice when planning experiments. Our results have strong implications for the design of RNA-seq experiments, and offer a novel tool for improved analysis of such datasets. Python code is freely available at http://diceseq.sf.net G.Sanguinetti@ed.ac.uk Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

A method of developing and introducing case-based learning to a preclinical veterinary curriculum.

PubMed

Crowther, Emma; Baillie, Sarah

2016-01-01

Case-based learning (CBL) has been introduced as part of a major review of the veterinary curriculum at the University of Bristol. The initial aim was to improve integration between all first year subjects, i.e., basic science disciplines (anatomy, physiology, and biochemistry), animal management, and professional studies, while highlighting the relevance by providing clinical context. The CBL was delivered as whole class sessions in a lecture theatre, as small group teaching facilities were not readily available, co-facilitated by two to four basic scientists and clinicians. Active learning tasks were included by using an audience response system and encouraging discussion. A case template was developed in PowerPoint and then populated by basic science and clinical staff in an iterative design process. Comments from a student focus group informed the design of the case sessions. Feedback collected from students via a survey after the first three cases suggested that CBL was well received and assisted students in integrating material taught in the first year units and was used to further improve the ongoing case design. The project team developed eight cases for Year 1 and is implementing CBL in various formats throughout the curriculum. There was a considerable time commitment in developing each case; however, the use of readily available software and the large group format overcame limitations, including resourcing small group sessions. This article reports a model that could be successfully adapted by other institutions wishing to use CBL to provide clinical context and promote integration of the basic sciences. © 2015 American Association of Anatomists.

A web accessible resource for investigating cassava phenomics and genomics information: BIOGEN BASE

PubMed Central

Jayakodi, Murukarthick; selvan, Sreedevi Ghokhilamani; Natesan, Senthil; Muthurajan, Raveendran; Duraisamy, Raghu; Ramineni, Jana Jeevan; Rathinasamy, Sakthi Ambothi; Karuppusamy, Nageswari; Lakshmanan, Pugalenthi; Chokkappan, Mohan

2011-01-01

The goal of our research is to establish a unique portal to bring out the potential outcome of the research in the Casssava crop. The Biogen base for cassava clearly brings out the variations of different traits of the germplasms, maintained at the Tapioca and Castor Research Station, Tamil Nadu Agricultural University. Phenotypic and genotypic variations of the accessions are clearly depicted, for the users to browse and interpret the variations using the microsatellite markers. Database (BIOGEN BASE ‐ CASSAVA) is designed using PHP and MySQL and is equipped with extensive search options. It is more user-friendly and made publicly available, to improve the research and development of cassava by making a wealth of genetics and genomics data available through open, common, and worldwide forum for all individuals interested in the field. Availability The database is available for free at http://www.tnaugenomics.com/biogenbase/casava.php PMID:21904428

Reliability and availability analysis of a 10 kW@20 K helium refrigerator

NASA Astrophysics Data System (ADS)

Li, J.; Xiong, L. Y.; Liu, L. Q.; Wang, H. R.; Wang, B. M.

2017-02-01

A 10 kW@20 K helium refrigerator has been established in the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. To evaluate and improve this refrigerator’s reliability and availability, a reliability and availability analysis is performed. According to the mission profile of this refrigerator, a functional analysis is performed. The failure data of the refrigerator components are collected and failure rate distributions are fitted by software Weibull++ V10.0. A Failure Modes, Effects & Criticality Analysis (FMECA) is performed and the critical components with higher risks are pointed out. Software BlockSim V9.0 is used to calculate the reliability and the availability of this refrigerator. The result indicates that compressors, turbine and vacuum pump are the critical components and the key units of this refrigerator. The mitigation actions with respect to design, testing, maintenance and operation are proposed to decrease those major and medium risks.

Wide-field-of-view millimeter-wave telescope design with ultra-low cross-polarization

NASA Astrophysics Data System (ADS)

Bernacki, Bruce E.; Kelly, James F.; Sheen, David; Hatchell, Brian; Valdez, Patrick; Tedeschi, Jonathan; Hall, Thomas; McMakin, Douglas

2012-06-01

As millimeter-wave arrays become available, off-axis imaging performance of the fore optics increases in importance due to the relatively large physical extent of the arrays. Typically, simple optical telescope designs are adapted to millimeter-wave imaging but single-mirror spherical or classic conic designs cannot deliver adequate image quality except near the optical axis. Since millimeter-wave designs are quasi-optical, optical ray tracing and commercial design software can be used to optimize designs to improve off-axis imaging as well as minimize cross-polarization. Methods that obey the Dragone-Mizuguchi condition for the design of reflective millimeter-wave telescopes with low cross-polarization also provide additional degrees of freedom that offer larger fields of view than possible with single-reflector designs. Dragone's graphical design method does not lend itself readily to computer-based optical design approaches, but subsequent authors expanded on Dragone's geometric design approach with analytic expressions that describe the location, shape, off-axis height and tilt of the telescope elements that satisfy Dragone's design rules and can be used as a first-order design for subsequent computer-based design and optimization. We investigate two design variants that obey the Dragone-Mizuguchi conditions that exhibit ultra-low cross-polarization and a large diffraction-limited field of view well suited to millimeter-wave imaging arrays.

Simplified Methods for Improving the Blast Resistance of Cold-Formed Steel Walls

DTIC Science & Technology

2011-01-01

sheathing products such as oriented strand board ( OSB ) offer a level of blast resistance that may be effective in mitigating lower-level blast...considered in order to keep designs to a minimum cost. Standard sheathing materials such as OSB , gypsum and plywood— as well as specially selected sheathing...commercially available clip connectors. Sheathing materials such as gypsum and OSB are brittle and have significantly lower capacity than sheet steel

The Infantry Squad: Decisive Force Now and in the Future

DTIC Science & Technology

2012-01-01

robotic improvements. ●A design that includes the human dimension as a foundation. In the Near Future The vignette that follows describes how the...view the …the truth is, the network needs to be available at the individual soldier level. Robots such as TALON allow warfighters to clear routes...quickly without having to wait for explosive ordnance dis- posal teams. Here a TALON robot inspects a suspected improvised explosive device. (P ho

Energy conversion/power plant cost-cutting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, K.

This presentation by Kenneth Nichols, Barber-Nichols, Inc., is about cost-cutting in the energy conversion phase and power plant phase of geothermal energy production. Mr. Nichols discusses several ways in which improvements could be made, including: use of more efficient compressors and other equipment as they become available, anticipating reservoir resource decline and planning for it, running smaller binary systems independent of human operators, and designing plants so that they are relatively maintenance-free.

State of the art review: Intravaginal probes for recording electromyography from the pelvic floor muscles.

PubMed

Keshwani, Nadia; McLean, Linda

2015-02-01

To survey commercially available intravaginal probes designed to record electromyography (EMG) from the pelvic floor muscles (PFMs), and to discuss the strengths and limitations of current technology. The MEDLINE EMBASE, CINAHL, PEDRO, and Cochrane databases were searched for articles in which intravaginal probes were described as having been used to record EMG from the PFMs. The World Wide Web was also searched using the Google search engine to find devices used to record EMG from the PFMs. Finally, a Canadian distributer of intravaginal probes was contacted to identify intravaginal EMG probes not identified through other methods. The specifications of each probe were determined through the manufacturer or their website, and each device was acquired by the investigators to verify the specifications and electrode configuration. The devices were evaluated against international standards for recording EMG data. Sixteen different models of commercially available intravaginal probes were identified: seven from published research papers, seven using the World Wide Web, and two through communication with a distributer. The probes vary in shape, dimensions, electrode positioning, and electrode configuration, with many designs prone to recording motion artifact, crosstalk, and/or inappropriate EMG signals. All commercially available intravaginal probes had deficiencies in their design such as problems with probe geometry, electrode size, location, and/or configuration. Improved intravaginal EMG probes should be developed for use in research and clinical practice. © 2013 Wiley Periodicals, Inc.

RASSP signal processing architectures

NASA Astrophysics Data System (ADS)

Shirley, Fred; Bassett, Bob; Letellier, J. P.

1995-06-01

The rapid prototyping of application specific signal processors (RASSP) program is an ARPA/tri-service effort to dramatically improve the process by which complex digital systems, particularly embedded signal processors, are specified, designed, documented, manufactured, and supported. The domain of embedded signal processing was chosen because it is important to a variety of military and commercial applications as well as for the challenge it presents in terms of complexity and performance demands. The principal effort is being performed by two major contractors, Lockheed Sanders (Nashua, NH) and Martin Marietta (Camden, NJ). For both, improvements in methodology are to be exercised and refined through the performance of individual 'Demonstration' efforts. The Lockheed Sanders' Demonstration effort is to develop an infrared search and track (IRST) processor. In addition, both contractors' results are being measured by a series of externally administered (by Lincoln Labs) six-month Benchmark programs that measure process improvement as a function of time. The first two Benchmark programs are designing and implementing a synthetic aperture radar (SAR) processor. Our demonstration team is using commercially available VME modules from Mercury Computer to assemble a multiprocessor system scalable from one to hundreds of Intel i860 microprocessors. Custom modules for the sensor interface and display driver are also being developed. This system implements either proprietary or Navy owned algorithms to perform the compute-intensive IRST function in real time in an avionics environment. Our Benchmark team is designing custom modules using commercially available processor ship sets, communication submodules, and reconfigurable logic devices. One of the modules contains multiple vector processors optimized for fast Fourier transform processing. Another module is a fiberoptic interface that accepts high-rate input data from the sensors and provides video-rate output data to a display. This paper discusses the impact of simulation on choosing signal processing algorithms and architectures, drawing from the experiences of the Demonstration and Benchmark inter-company teams at Lockhhed Sanders, Motorola, Hughes, and ISX.

Design of monocular head-mounted displays for increased indoor firefighting safety and efficiency

NASA Astrophysics Data System (ADS)

Wilson, Joel; Steingart, Dan; Romero, Russell; Reynolds, Jessica; Mellers, Eric; Redfern, Andrew; Lim, Lloyd; Watts, William; Patton, Colin; Baker, Jessica; Wright, Paul

2005-05-01

Four monocular Head-Mounted Display (HMD) prototypes from the Fire Information and Rescue Equipment (FIRE) project at UC Berkeley are presented. The FIRE project aims to give firefighters a system of information technology tools for safer and more efficient firefighting in large buildings. The paper begins by describing the FIRE project and its use of a custom wireless sensor network (WSN) called SmokeNet for personnel tracking. The project aims to address urban/industrial firefighting procedures in need of improvement. Two "user-needs" studies with the Chicago and Berkeley Fire Departments are briefly presented. The FIRE project"s initial HMD prototype designs are then discussed with regard to feedback from the user-needs studies. These prototypes are evaluated in their potential costs and benefits to firefighters and found to need improvement. Next, some currently available commercial HMDs are reviewed and compared in their cost, performance, and potential for use by firefighters. Feedback from the Berkeley Fire Department user-needs study, in which the initial prototypes were demonstrated, is compiled into a concept selection matrix for the next prototypes. This matrix is used to evaluate a variety of HMDs, including some of the commercial units presented, and to select the best design options. Finally, the current prototypes of the two best design options are presented and discussed.

A comparison of text and technology based training tools to improve cognitive skills in older adults.

PubMed

Power, Kevin; Kirwan, Grainne; Palmer, Marion

2011-01-01

Research has indicated that use of cognitive skills training tools can produce positive benefits with older adults. However, little research has compared the efficacy of technology-based interventions and more traditional, text-based interventions which are also available. This study aimed to investigate cognitive skills improvements experienced by 40 older adults using cognitive skills training tools. A Solomon 4 group design was employed to determine which intervention demonstrated the greatest improvement. Participants were asked to use the interventions for 5-10 minutes per day, over a period of 60 days. Pre and post-tests consisted of measures of numerical ability, self-reported memory and intelligence. Following training, older adults indicated significant improvements on numerical ability and intelligence regardless of intervention type. No improvement in selfreported memory was observed. This research provides a critical appraisal of brain training tools and can help point the way for future improvements in the area. Brain training improvements could lead to improved quality of life, and perhaps, have financial and independent living ramifications for older adults.

NorthStar, a support tool for the design and evaluation of quality improvement interventions in healthcare.

PubMed

Akl, Elie A; Treweek, Shaun; Foy, Robbie; Francis, Jill; Oxman, Andrew D

2007-06-26

The Research-Based Education and Quality Improvement (ReBEQI) European partnership aims to establish a framework and provide practical tools for the selection, implementation, and evaluation of quality improvement (QI) interventions. We describe the development and preliminary evaluation of the software tool NorthStar, a major product of the ReBEQI project. We focused the content of NorthStar on the design and evaluation of QI interventions. A lead individual from the ReBEQI group drafted each section, and at least two other group members reviewed it. The content is based on published literature, as well as material developed by the ReBEQI group. We developed the software in both a Microsoft Windows HTML help system version and a web-based version. In a preliminary evaluation, we surveyed 33 potential users about the acceptability and perceived utility of NorthStar. NorthStar consists of 18 sections covering the design and evaluation of QI interventions. The major focus of the intervention design sections is on how to identify determinants of practice (factors affecting practice patterns), while the major focus of the intervention evaluation sections is on how to design a cluster randomised trial. The two versions of the software can be transferred by email or CD, and are available for download from the internet. The software offers easy navigation and various functions to access the content. Potential users (55% response rate) reported above-moderate levels of confidence in carrying out QI research related tasks if using NorthStar, particularly when developing a protocol for a cluster randomised trial NorthStar is an integrated, accessible, practical, and acceptable tool to assist developers and evaluators of QI interventions.

Central coast designs: The Eightball Express. Taking off with convention, cruising with improvements and landing with absolute success

NASA Technical Reports Server (NTRS)

Davis, Ryan Edwin; Dawson, Anne Marie; Fecht, Paul Hans; Fry, Roman Zyabash; Vantriet, Robert; Macabantad, Dominique Dujale; Miller, Robert Glenn; Perez, Gustavo, Jr.; Weise, Timothy Michael

1994-01-01

The airline industry is very competitive, resulting in most U.S. and many international airlines being unprofitable. Because of this competition the airlines have been engaging in fare wars (which reduce revenue generated by transporting passengers) while inflation has increased. This situation of course is not developing revenue for the airlines. To revive the airlines to profitability, the difference between revenue received and airline operational cost must be improved. To solve these extreme conditions, the Eightball Express was designed with the main philosophy of developing an aircraft with a low direct operating cost and acquisition cost. Central Coast Designs' (CCD) aircraft utilizes primarily aluminum in the structure to minimize manufacturing cost, supercritical airfoil sections to minimize drag, and fuel efficient engines to minimize fuel burn. Furthermore, the aircraft was designed using Total Quality Management and Integrated Product Development to minimize development and manufacturing costs. Using these primary cost reduction techniques, the Eightball Express was designed to meet the Lockheed/AIAA Request for Proposal (RFP) requirements of a low cost, 153 passenger, 3000 nm. range transport. The Eightball Express is able to takeoff on less than a 7000 ft. runway, cruise at Mach 0.82 at an altitude of 36,000 ft. for a range of 3,000 nm., and lands on a 5,000 ft. runway. lt is able to perform this mission at a direct operating cost of 3.51 cents/available seat mile in 1992 dollars while the acquisition cost is only $28 million in 1992 dollars. By utilizing and improving on proven technologies, CCD has produced an efficient low cost commercial transport for the future.

NorthStar, a support tool for the design and evaluation of quality improvement interventions in healthcare

PubMed Central

Akl, Elie A; Treweek, Shaun; Foy, Robbie; Francis, Jill; Oxman, Andrew D

2007-01-01

Background The Research-Based Education and Quality Improvement (ReBEQI) European partnership aims to establish a framework and provide practical tools for the selection, implementation, and evaluation of quality improvement (QI) interventions. We describe the development and preliminary evaluation of the software tool NorthStar, a major product of the ReBEQI project. Methods We focused the content of NorthStar on the design and evaluation of QI interventions. A lead individual from the ReBEQI group drafted each section, and at least two other group members reviewed it. The content is based on published literature, as well as material developed by the ReBEQI group. We developed the software in both a Microsoft Windows HTML help system version and a web-based version. In a preliminary evaluation, we surveyed 33 potential users about the acceptability and perceived utility of NorthStar. Results NorthStar consists of 18 sections covering the design and evaluation of QI interventions. The major focus of the intervention design sections is on how to identify determinants of practice (factors affecting practice patterns), while the major focus of the intervention evaluation sections is on how to design a cluster randomised trial. The two versions of the software can be transferred by email or CD, and are available for download from the internet. The software offers easy navigation and various functions to access the content. Potential users (55% response rate) reported above-moderate levels of confidence in carrying out QI research related tasks if using NorthStar, particularly when developing a protocol for a cluster randomised trial Conclusion NorthStar is an integrated, accessible, practical, and acceptable tool to assist developers and evaluators of QI interventions. PMID:17594495

Development of the Inventory Management and Tracking System (IMATS) to Track the Availability of Public Health Department Medical Countermeasures During Public Health Emergencies

PubMed Central

Sahar, Liora; Faler, Guy; Hristov, Emil; Hughes, Susan; Lee, Leslie; Westnedge, Caroline; Erickson, Benjamin; Nichols, Barbara

2015-01-01

Objective To bridge gaps identified during the 2009 H1N1 influenza pandemic by developing a system that provides public health departments improved capability to manage and track medical countermeasures at the state and local levels and to report their inventory levels to the Centers for Disease Control and Prevention (CDC). Materials and Methods The CDC Countermeasure Tracking Systems (CTS) program designed and implemented the Inventory Management and Tracking System (IMATS) to manage, track, and report medical countermeasure inventories at the state and local levels. IMATS was designed by CDC in collaboration with state and local public health departments to ensure a “user-centered design approach.” A survey was completed to assess functionality and user satisfaction. Results IMATS was deployed in September 2011 and is provided at no cost to public health departments. Many state and local public health departments nationwide have adopted IMATS and use it to track countermeasure inventories during public health emergencies and daily operations. Discussion A successful response to public health emergencies requires efficient, accurate reporting of countermeasure inventory levels. IMATS is designed to support both emergency operations and everyday activities. Future improvements to the system include integrating barcoding technology and streamlining user access. To maintain system readiness, we continue to collect user feedback, improve technology, and enhance its functionality. Conclusion IMATS satisfies the need for a system for monitoring and reporting health departments’ countermeasure quantities so that decision makers are better informed. The “user-centered design approach” was successful, as evident by the many public health departments that adopted IMATS. PMID:26392843

An extended smart utilization medium access control (ESU-MAC) protocol for ad hoc wireless systems

NASA Astrophysics Data System (ADS)

Vashishtha, Jyoti; Sinha, Aakash

2006-05-01

The demand for spontaneous setup of a wireless communication system has increased in recent years for areas like battlefield, disaster relief operations etc., where a pre-deployment of network infrastructure is difficult or unavailable. A mobile ad-hoc network (MANET) is a promising solution, but poses a lot of challenges for all the design layers, specifically medium access control (MAC) layer. Recent existing works have used the concepts of multi-channel and power control in designing MAC layer protocols. SU-MAC developed by the same authors, efficiently uses the 'available' data and control bandwidth to send control information and results in increased throughput via decreasing contention on the control channel. However, SU-MAC protocol was limited for static ad-hoc network and also faced the busy-receiver node problem. We present the Extended SU-MAC (ESU-MAC) protocol which works mobile nodes. Also, we significantly improve the scheme of control information exchange in ESU-MAC to overcome the busy-receiver node problem and thus, further avoid the blockage of control channel for longer periods of time. A power control scheme is used as before to reduce interference and to effectively re-use the available bandwidth. Simulation results show that ESU-MAC protocol is promising for mobile, ad-hoc network in terms of reduced contention at the control channel and improved throughput because of channel re-use. Results show a considerable increase in throughput compared to SU-MAC which could be attributed to increased accessibility of control channel and improved utilization of data channels due to superior control information exchange scheme.

Improving virtual screening of G protein-coupled receptors via ligand-directed modeling

PubMed Central

Simms, John; Christopoulos, Arthur; Wootten, Denise

2017-01-01

G protein-coupled receptors (GPCRs) play crucial roles in cell physiology and pathophysiology. There is increasing interest in using structural information for virtual screening (VS) of libraries and for structure-based drug design to identify novel agonist or antagonist leads. However, the sparse availability of experimentally determined GPCR/ligand complex structures with diverse ligands impedes the application of structure-based drug design (SBDD) programs directed to identifying new molecules with a select pharmacology. In this study, we apply ligand-directed modeling (LDM) to available GPCR X-ray structures to improve VS performance and selectivity towards molecules of specific pharmacological profile. The described method refines a GPCR binding pocket conformation using a single known ligand for that GPCR. The LDM method is a computationally efficient, iterative workflow consisting of protein sampling and ligand docking. We developed an extensive benchmark comparing LDM-refined binding pockets to GPCR X-ray crystal structures across seven different GPCRs bound to a range of ligands of different chemotypes and pharmacological profiles. LDM-refined models showed improvement in VS performance over origin X-ray crystal structures in 21 out of 24 cases. In all cases, the LDM-refined models had superior performance in enriching for the chemotype of the refinement ligand. This likely contributes to the LDM success in all cases of inhibitor-bound to agonist-bound binding pocket refinement, a key task for GPCR SBDD programs. Indeed, agonist ligands are required for a plethora of GPCRs for therapeutic intervention, however GPCR X-ray structures are mostly restricted to their inactive inhibitor-bound state. PMID:29131821

A pathologist-designed imaging system for anatomic pathology signout, teaching, and research.

PubMed

Schubert, E; Gross, W; Siderits, R H; Deckenbaugh, L; He, F; Becich, M J

1994-11-01

Pathology images are derived from gross surgical specimens, light microscopy, immunofluorescence, electron microscopy, molecular diagnostic gels, flow cytometry, image analysis data, and clinical laboratory data in graphic form. We have implemented a network of desktop personal computers (PCs) that allow us to easily capture, store, and retrieve gross and microscopic, anatomic, and research pathology images. System architecture involves multiple image acquisition and retrieval sites and a central file server for storage. The digitized images are conveyed via a local area network to and from image capture or display stations. Acquisition sites consist of a high-resolution camera connected to a frame grabber card in a 486-type personal computer, equipped with 16 MB (Table 1) RAM, a 1.05-gigabyte hard drive, and a 32-bit ethernet card for access to our anatomic pathology reporting system. We have designed a push-button workstation for acquiring and indexing images that does not significantly interfere with surgical pathology sign-out. Advantages of the system include the following: (1) Improving patient care: the availability of gross images at time of microscopic sign-out, verification of recurrence of malignancy from archived images, monitoring of bone marrow engraftment and immunosuppressive intervention after bone marrow/solid organ transplantation on repeat biopsies, and ability to seek instantaneous consultation with any pathologist on the network; (2) enhancing the teaching environment: building a digital surgical pathology atlas, improving the availability of images for conference support, and sharing cases across the network; (3) enhancing research: case study compilation, metastudy analysis, and availability of digitized images for quantitative analysis and permanent/reusable image records for archival study; and (4) other practical and economic considerations: storing case requisition images and hand-drawn diagrams deters the spread of gross room contaminants and results in considerable cost savings in photographic media for conferences, improved quality assurance by porting control stains across the network, and a multiplicity of other advantages that enhance image and information management in pathology.

Benefits and challenges of health information systems for operations research: an illustrative example to improve surgical scheduling.

PubMed

Chow, Vincent S; Huang, Wenhai; Puterman, Martin L

2009-01-01

Operations research (OR) is playing an increasing role in the support of many health care initiatives. However one of the main challenges facing OR practitioners is the availability and the integrity of operations data. Hospital information systems (HIS) are often designed with a clinical or accounting focus and may lack the data necessary for operational studies. In this paper, we illustrate the data processing methods and data challenges faced by our team during a study of surgical scheduling practices at the Vancouver Island Health Authority. We also provide some general recommendations to improve HIS from an operations perspective. In general, more integration between operations researchers and HIS specialists are required to support ongoing operational improvements in the health care sector.

A Modeling Tool for Household Biogas Burner Flame Port Design

NASA Astrophysics Data System (ADS)

Decker, Thomas J.

Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

SemiBoost: boosting for semi-supervised learning.

PubMed

Mallapragada, Pavan Kumar; Jin, Rong; Jain, Anil K; Liu, Yi

2009-11-01

Semi-supervised learning has attracted a significant amount of attention in pattern recognition and machine learning. Most previous studies have focused on designing special algorithms to effectively exploit the unlabeled data in conjunction with labeled data. Our goal is to improve the classification accuracy of any given supervised learning algorithm by using the available unlabeled examples. We call this as the Semi-supervised improvement problem, to distinguish the proposed approach from the existing approaches. We design a metasemi-supervised learning algorithm that wraps around the underlying supervised algorithm and improves its performance using unlabeled data. This problem is particularly important when we need to train a supervised learning algorithm with a limited number of labeled examples and a multitude of unlabeled examples. We present a boosting framework for semi-supervised learning, termed as SemiBoost. The key advantages of the proposed semi-supervised learning approach are: 1) performance improvement of any supervised learning algorithm with a multitude of unlabeled data, 2) efficient computation by the iterative boosting algorithm, and 3) exploiting both manifold and cluster assumption in training classification models. An empirical study on 16 different data sets and text categorization demonstrates that the proposed framework improves the performance of several commonly used supervised learning algorithms, given a large number of unlabeled examples. We also show that the performance of the proposed algorithm, SemiBoost, is comparable to the state-of-the-art semi-supervised learning algorithms.

RAMI modeling of plant systems for proposed tritium production and extraction facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

2000-04-05

The control of life-cycle cost is a primary concern during the development, construction, operation, and decommissioning of DOE systems and facilities. An effective tool that can be used to control these costs, beginning with the design stage, is called a reliability, availability, maintainability, and inspectability analysis or, simply, RAMI for short. In 1997, RAMI technology was introduced to the Savannah River Site with applications at the conceptual design stage beginning with the Accelerator Production of Tritium (APT) Project and later extended to the Commercial Light Water Reactor (CLWR) Tritium Extraction Facility (TEF) Project. More recently it has been applied tomore » the as-build Water Treatment Facilities designed for ground water environmental restoration. This new technology and database was applied to the assessment of balance-of-plant systems for the APT Conceptual Design Report. Initial results from the Heat Removal System Assessment revealed that the system conceptual design would cause the APT to fall short of its annual production goal. Using RAM technology to immediately assess this situation, it was demonstrated that the product loss could be gained back by upgrading the system's chiller unit capacity at a cost of less than $1.3 million. The reclaimed production is worth approximately $100 million. The RAM technology has now been extended to assess the conceptual design for the CLWR-TEF Project. More specifically, this technology and database is being used to translate high level availability goals into lower level system design requirements that will ensure the TEF meets its production goal. Results, from the limited number of system assessments performed to date, have already been used to modify the conceptual design for a remote handling system, improving its availability to the point that a redundant system, with its associated costs of installation and operation may no longer be required. RAMI results were also used to justify the elimination of a metal uranium bed in the design of a water cracker system, producing a significant reduction in the estimated construction and operating costs.« less

Improvement of Physical Therapist Assessment of Risk of Falls in the Hospital and Discharge Handover Through an Intervention to Modify Clinical Behavior.

PubMed

Thomas, Susie; Mackintosh, Shylie

2016-06-01

Discharge from the hospital is a high risk transition period for older adults at risk of falls. Guidelines relevant to physical therapists for managing this risk are well documented, but commonly not implemented. This project implemented an intervention to improve physical therapists' adherence to key guideline recommendations for managing risk of falls on discharge from one hospital. A pretest-posttest study design was undertaken and was underpinned by the Theoretical Domains Framework (TDF) to aid in the design of interventions to increase physical therapists' adherence to guideline recommendations and to identify barriers to these interventions. A multifaceted intervention was implemented, including the establishment of a governance committee, education sessions, development of a "pathway" to guide practice, modification of an existing standardized assessment proforma, development of standardized processes and indicators for handover, increasing availability of educational handouts, audit and feedback processes, and allocation of dedicated staffing to oversee falls prevention within the physical therapy department. There were significant improvements in physical therapist behavior leading to key guideline recommendations being met, including: the proportion of patients who were identified to be at risk of falls (6.3% preintervention versus 94.8% postintervention) prior to discharge, an increase in documentation of clinical handover at discharge (68.6% preintervention versus 90.9% postintervention), and improvement in the quality of this documented clinical handover (34.9% of case notes met 5 criteria preintervention versus 92.9% postintervention). The approach was resource intensive and consequently may be difficult to replicate at other sites. A multifaceted intervention underpinned by the TDF, designed to modify physical therapists' behavior to improve adherence to guideline recommendations for managing risk of falls on discharge from one hospital, was successful. © 2016 American Physical Therapy Association.

A focused exercise regimen improves clinical measures of balance in patients with peripheral neuropathy.

PubMed

Richardson, J K; Sandman, D; Vela, S

2001-02-01

To determine the effect of a specific exercise regimen on clinical measures of postural stability and confidence in a population with peripheral neuropathy (PN). Prospective, controlled, single blind study. Outpatient clinic of a university hospital. Twenty subjects with diabetes mellitus and electrodiagnostically confirmed PN. Ten subjects underwent a 3-week intervention exercise regimen designed to increase rapidly available distal strength and balance. The other 10 subjects performed a control exercise regimen. Unipedal stance time, functional reach, tandem stance time, and score on the activities-specific balance and confidence (ABC) scale. The intervention subjects, but not the control subjects, showed significant improvement in all 3 clinical measures of balance and nonsignificant improvement on the ABC scale. A brief, specific exercise regimen improved clinical measures of balance in patients with diabetic PN. Further studies are needed to determine if this result translates into a lower fall frequency in this high-risk population.

Recent technologic advances in multi-detector row cardiac CT.

PubMed

Halliburton, Sandra Simon

2009-11-01

Recent technical advances in multi-detector row CT have resulted in lower radiation dose, improved temporal and spatial resolution, decreased scan time, and improved tissue differentiation. Lower radiation doses have resulted from the use of pre-patient z collimators, the availability of thin-slice axial data acquisition, the increased efficiency of ECG-based tube current modulation, and the implementation of iterative reconstruction algorithms. Faster gantry rotation and the simultaneous use of two x-ray sources have led to improvements in temporal resolution, and gains in spatial resolution have been achieved through application of the flying x-ray focal-spot technique in the z-direction. Shorter scan times have resulted from the design of detector arrays with increasing numbers of detector rows and through the simultaneous use of two x-ray sources to allow higher helical pitch. Some improvement in tissue differentiation has been achieved with dual energy CT. This article discusses these recent technical advances in detail.

Reshaping of Gait Coordination by Robotic Intervention in Myelopathy Patients After Surgery

PubMed Central

Puentes, Sandra; Kadone, Hideki; Kubota, Shigeki; Abe, Tetsuya; Shimizu, Yukiyo; Marushima, Aiki; Sankai, Yoshiyuki; Yamazaki, Masashi; Suzuki, Kenji

2018-01-01

The Ossification of the Posterior Longitudinal Ligament (OPLL) is an idiopathic degenerative spinal disease which may cause motor deficit. For patients presenting myelopathy or severe stenosis, surgical decompression is the treatment of choice; however, despite adequate decompression residual motor impairment is found in some cases. After surgery, there is no therapeutic approach available for this population. The Hybrid Assistive Limb® (HAL) robot suit is a unique powered exoskeleton designed to predict, support, and enhance the lower extremities performance of patients using their own bioelectric signals. This approach has been used for spinal cord injury and stroke patients where the walking performance improved. However, there is no available data about gait kinematics evaluation after HAL therapy. Here we analyze the effect of HAL therapy in OPLL patients in acute and chronic stages after decompression surgery. We found that HAL therapy improved the walking performance for both groups. Interestingly, kinematics evaluation by the analysis of the elevation angles of the thigh, shank, and foot by using a principal component analysis showed that planar covariation, plane orientation, and movement range evaluation improved for acute patients suggesting an improvement in gait coordination. Being the first study performing kinematics analysis after HAL therapy, our results suggest that HAL improved the gait coordination of acute patients by supporting the relearning process and therefore reshaping their gait pattern. PMID:29551960

Report on Lincoln Electric System gas turbine inlet air cooling. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebeling, J.A.; Buecker, B.J.; Kitchen, B.J.

1993-12-01

As a result of increased electric power demand, the Lincoln Electric System (LES) of Lincoln, Nebraska (USA) decided to upgrade the generating capacity of their system. Based on capacity addition studies, the utility elected to improve performance of a GE MS7001B combustion turbine located at their Rokeby station. The turbine is used to meet summer-time peak loads, and as is common among combustion turbines, capacity declines as ambient air temperature rises. To improve the turbine capacity, LES decided to employ the proven technique of inlet air cooling, but with a novel approach: off-peak ice generation to be used for peak-loadmore » air cooling. EPRI contributed design concept definition and preliminary engineering. The American Public Power Association provided co-funding. Burns & McDonnell Engineering Company, under contract to Lincoln Electric System, provided detailed design and construction documents. LES managed the construction, start-up, and testing of the cooling system. This report describes the technical basis for the cooling system design, and it discusses combustion turbine performance, project economics, and potential system improvements. Control logic and P&ID drawings are also included. The inlet air cooling system has been available since the fall of 1991. When in use, the cooling system has increased turbine capacity by up to 17% at a cost of less than $200 per increased kilowatt of generation.« less

NASA HPCC Technology for Aerospace Analysis and Design

NASA Technical Reports Server (NTRS)

Schulbach, Catherine H.

1999-01-01

The Computational Aerosciences (CAS) Project is part of NASA's High Performance Computing and Communications Program. Its primary goal is to accelerate the availability of high-performance computing technology to the US aerospace community-thus providing the US aerospace community with key tools necessary to reduce design cycle times and increase fidelity in order to improve safety, efficiency and capability of future aerospace vehicles. A complementary goal is to hasten the emergence of a viable commercial market within the aerospace community for the advantage of the domestic computer hardware and software industry. The CAS Project selects representative aerospace problems (especially design) and uses them to focus efforts on advancing aerospace algorithms and applications, systems software, and computing machinery to demonstrate vast improvements in system performance and capability over the life of the program. Recent demonstrations have served to assess the benefits of possible performance improvements while reducing the risk of adopting high-performance computing technology. This talk will discuss past accomplishments in providing technology to the aerospace community, present efforts, and future goals. For example, the times to do full combustor and compressor simulations (of aircraft engines) have been reduced by factors of 320:1 and 400:1 respectively. While this has enabled new capabilities in engine simulation, the goal of an overnight, dynamic, multi-disciplinary, 3-dimensional simulation of an aircraft engine is still years away and will require new generations of high-end technology.

Designing and specifying aspheres for manufacturability

NASA Astrophysics Data System (ADS)

Kumler, Jay

2005-08-01

New technologies for the fabrication of aspheres have increased opportunities for using aspheres in a wider range of optical systems. If manufacturability is considered early in the optical design process, the short and long term costs of the aspheric surface can be greatly reduced without sacrificing performance. The optical designer must learn how to select optimum materials for aspheres. Using non-staining glasses, higher index glass types, and softer glass types can help reduce production costs. If the optical designer understands what range of aspheric surfaces can be manufactured, they can constrain the aspheric surface during optimization. The steepness of the aspheric departure (the slope of the aspheric departure) often has a larger impact on manufacturing difficulty than the amplitude of the asphere or the steepness of the base radius. Tolerancing can increase the difficulty without measurably improving optical performance. Finally, the asphere can be designed for ease of metrology. Understanding the options that are available for aspheric metrology will allow the engineer to control tooling and fixturing that is required for testing.

Software for quantitative analysis of radiotherapy: overview, requirement analysis and design solutions.

PubMed

Zhang, Lanlan; Hub, Martina; Mang, Sarah; Thieke, Christian; Nix, Oliver; Karger, Christian P; Floca, Ralf O

2013-06-01

Radiotherapy is a fast-developing discipline which plays a major role in cancer care. Quantitative analysis of radiotherapy data can improve the success of the treatment and support the prediction of outcome. In this paper, we first identify functional, conceptional and general requirements on a software system for quantitative analysis of radiotherapy. Further we present an overview of existing radiotherapy analysis software tools and check them against the stated requirements. As none of them could meet all of the demands presented herein, we analyzed possible conceptional problems and present software design solutions and recommendations to meet the stated requirements (e.g. algorithmic decoupling via dose iterator pattern; analysis database design). As a proof of concept we developed a software library "RTToolbox" following the presented design principles. The RTToolbox is available as open source library and has already been tested in a larger-scale software system for different use cases. These examples demonstrate the benefit of the presented design principles. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Aircraft ride quality controller design using new robust root clustering theory for linear uncertain systems

NASA Technical Reports Server (NTRS)

Yedavalli, R. K.

1992-01-01

The aspect of controller design for improving the ride quality of aircraft in terms of damping ratio and natural frequency specifications on the short period dynamics is addressed. The controller is designed to be robust with respect to uncertainties in the real parameters of the control design model such as uncertainties in the dimensional stability derivatives, imperfections in actuator/sensor locations and possibly variations in flight conditions, etc. The design is based on a new robust root clustering theory developed by the author by extending the nominal root clustering theory of Gutman and Jury to perturbed matrices. The proposed methodology allows to get an explicit relationship between the parameters of the root clustering region and the uncertainty radius of the parameter space. The current literature available for robust stability becomes a special case of this unified theory. The bounds derived on the parameter perturbation for robust root clustering are then used in selecting the robust controller.

Design and test of aircraft engine isolators for reduced interior noise

NASA Technical Reports Server (NTRS)

Unruh, J. F.; Scheidt, D. C.

1982-01-01

Improved engine vibration isolation was proposed to be the most weight and cost efficient retrofit structure-borne noise control measure for single engine general aviation aircraft. A study was carried out the objectives: (1) to develop an engine isolator design specification for reduced interior noise transmission, (2) select/design candidate isolators to meet a 15 dB noise reduction design goal, and (3) carry out a proof of concept evaluation test. Analytical model of the engine, vibration isolators and engine mount structure were coupled to an empirical model of the fuselage for noise transmission evaluation. The model was used to develop engine isolator dynamic properties design specification for reduced noise transmission. Candidate isolators ere chosen from available product literature and retrofit to a test aircraft. A laboratory based test procedure was then developed to simulate engine induced noise transmission in the aircraft for a proof of concept evaluation test. Three candidate isolator configurations were evaluated for reduced structure-borne noise transmission relative to the original equipment isolators.

VLSI Design of SVM-Based Seizure Detection System With On-Chip Learning Capability.

PubMed

Feng, Lichen; Li, Zunchao; Wang, Yuanfa

2018-02-01

Portable automatic seizure detection system is very convenient for epilepsy patients to carry. In order to make the system on-chip trainable with high efficiency and attain high detection accuracy, this paper presents a very large scale integration (VLSI) design based on the nonlinear support vector machine (SVM). The proposed design mainly consists of a feature extraction (FE) module and an SVM module. The FE module performs the three-level Daubechies discrete wavelet transform to fit the physiological bands of the electroencephalogram (EEG) signal and extracts the time-frequency domain features reflecting the nonstationary signal properties. The SVM module integrates the modified sequential minimal optimization algorithm with the table-driven-based Gaussian kernel to enable efficient on-chip learning. The presented design is verified on an Altera Cyclone II field-programmable gate array and tested using the two publicly available EEG datasets. Experiment results show that the designed VLSI system improves the detection accuracy and training efficiency.

Accurate disulfide-bonding network predictions improve ab initio structure prediction of cysteine-rich proteins

PubMed Central

Yang, Jing; He, Bao-Ji; Jang, Richard; Zhang, Yang; Shen, Hong-Bin

2015-01-01

Abstract Motivation: Cysteine-rich proteins cover many important families in nature but there are currently no methods specifically designed for modeling the structure of these proteins. The accuracy of disulfide connectivity pattern prediction, particularly for the proteins of higher-order connections, e.g. >3 bonds, is too low to effectively assist structure assembly simulations. Results: We propose a new hierarchical order reduction protocol called Cyscon for disulfide-bonding prediction. The most confident disulfide bonds are first identified and bonding prediction is then focused on the remaining cysteine residues based on SVR training. Compared with purely machine learning-based approaches, Cyscon improved the average accuracy of connectivity pattern prediction by 21.9%. For proteins with more than 5 disulfide bonds, Cyscon improved the accuracy by 585% on the benchmark set of PDBCYS. When applied to 158 non-redundant cysteine-rich proteins, Cyscon predictions helped increase (or decrease) the TM-score (or RMSD) of the ab initio QUARK modeling by 12.1% (or 14.4%). This result demonstrates a new avenue to improve the ab initio structure modeling for cysteine-rich proteins. Availability and implementation: http://www.csbio.sjtu.edu.cn/bioinf/Cyscon/ Contact: zhng@umich.edu or hbshen@sjtu.edu.cn Supplementary information: Supplementary data are available at Bioinformatics online. PMID:26254435

Evolving health information technology and the timely availability of visit diagnoses from ambulatory visits: a natural experiment in an integrated delivery system.

PubMed

Bardach, Naomi S; Huang, Jie; Brand, Richard; Hsu, John

2009-07-17

Health information technology (HIT) may improve health care quality and outcomes, in part by making information available in a timelier manner. However, there are few studies documenting the changes in timely availability of data with the use of a sophisticated electronic medical record (EMR), nor a description of how the timely availability of data might differ with different types of EMRs. We hypothesized that timely availability of data would improve with use of increasingly sophisticated forms of HIT. We used an historical observation design (2004-2006) using electronic data from office visits in an integrated delivery system with three types of HIT: Basic, Intermediate, and Advanced. We calculated the monthly percentage of visits using the various types of HIT for entry of visit diagnoses into the delivery system's electronic database, and the time between the visit and the availability of the visit diagnoses in the database. In January 2004, when only Basic HIT was available, 10% of office visits had diagnoses entered on the same day as the visit and 90% within a week; 85% of office visits used paper forms for recording visit diagnoses, 16% used Basic at that time. By December 2006, 95% of all office visits had diagnoses available on the same day as the visit, when 98% of office visits used some form of HIT for entry of visit diagnoses (Advanced HIT for 67% of visits). Use of HIT systems is associated with dramatic increases in the timely availability of diagnostic information, though the effects may vary by sophistication of HIT system. Timely clinical data are critical for real-time population surveillance, and valuable for routine clinical care.

Evidence-Based and Value-Based Decision Making About Healthcare Design: An Economic Evaluation of the Safety and Quality Outcomes.

PubMed

Zadeh, Rana; Sadatsafavi, Hessam; Xue, Ryan

2015-01-01

This study describes a vision and framework that can facilitate the implementation of evidence-based design (EBD), scientific knowledge base into the process of the design, construction, and operation of healthcare facilities and clarify the related safety and quality outcomes for the stakeholders. The proposed framework pairs EBD with value-driven decision making and aims to improve communication among stakeholders by providing a common analytical language. Recent EBD research indicates that the design and operation of healthcare facilities contribute to an organization's operational success by improving safety, quality, and efficiency. However, because little information is available about the financial returns of evidence-based investments, such investments are readily eliminated during the capital-investment decision-making process. To model the proposed framework, we used engineering economy tools to evaluate the return on investments in six successful cases, identified by a literature review, in which facility design and operation interventions resulted in reductions in hospital-acquired infections, patient falls, staff injuries, and patient anxiety. In the evidence-based cases, calculated net present values, internal rates of return, and payback periods indicated that the long-term benefits of interventions substantially outweighed the intervention costs. This article explained a framework to develop a research-based and value-based communication language on specific interventions along the planning, design and construction, operation, and evaluation stages. Evidence-based and value-based design frameworks can be applied to communicate the life-cycle costs and savings of EBD interventions to stakeholders, thereby contributing to more informed decision makings and the optimization of healthcare infrastructures. © The Author(s) 2015.

Recommendations for the Design and Analysis of Treatment Trials for Alcohol Use Disorders.

PubMed

Witkiewitz, Katie; Finney, John W; Harris, Alex H S; Kivlahan, Daniel R; Kranzler, Henry R

2015-09-01

Over the past 60 years, the view that "alcoholism" is a disease for which the only acceptable goal of treatment is abstinence has given way to the recognition that alcohol use disorders (AUDs) occur on a continuum of severity, for which a variety of treatment options are appropriate. However, because the available treatments for AUDs are not effective for everyone, more research is needed to develop novel and more efficacious treatments to address the range of AUD severity in diverse populations. Here we offer recommendations for the design and analysis of alcohol treatment trials, with a specific focus on the careful conduct of randomized clinical trials of medications and nonpharmacological interventions for AUDs. This paper provides a narrative review of the quality of published clinical trials and recommendations for the optimal design and analysis of treatment trials for AUDs. Despite considerable improvements in the design of alcohol clinical trials over the past 2 decades, many studies of AUD treatments have used faulty design features and statistical methods that are known to produce biased estimates of treatment efficacy. The published statistical and methodological literatures provide clear guidance on methods to improve clinical trial design and analysis. Consistent use of state-of-the-art design features and analytic approaches will enhance the internal and external validity of treatment trials for AUDs across the spectrum of severity. The ultimate result of this attention to methodological rigor is that better treatment options will be identified for patients with an AUD. Copyright © 2015 by the Research Society on Alcoholism.

Principles and concepts in designing tropical-shore settlement in estuary ecosystem, case study: Weriagar District, Bintuni Bay

NASA Astrophysics Data System (ADS)

Firmansyah; Nidia Kusuma, Bintang; Prayuni, Ira; Fernando, Aldo

2017-12-01

Weriagar District is located in estuary area and is prone to land loss, due to river and coastal erosion. This paper will describe about tropical-shore settlement design and house design in estuary area. The results from analysis phase shows that it's necessary to design a house and settlement that can fulfil the needs of indigenous people, both functionally and aesthetically. Functionally, the house is designed to provide spaces for both private and public needs of the family. It can be used either as a family private space or as a public gathering space between family and their neighbours. Aesthetically, house’ architectural form is designed into that identifies the locality of Weriagar District. The houses’ design feature highlighted in using local material, rainwater harvesting system, high pitched roof feature as response to hot-humid climate, and elevated-floor feature as response to tidal condition in estuary area. The houses design also considered daily activity pattern and community culture, including appropriate structure, construction, and material availability. The expected result was that the settlement improvement and house design would meet suitable standards and needs of inhabitants in Weriagar District.

Time for T? Immunoinformatics addresses vaccine design for neglected tropical and emerging infectious diseases

PubMed Central

Terry, Frances E; Moise, Leonard; Martin, Rebecca F; Torres, Melissa; Pilotte, Nils; Williams, Steven A; De Groot, Anne S

2015-01-01

Vaccines have been invaluable for global health, saving lives and reducing healthcare costs, while also raising the quality of human life. However, newly emerging infectious diseases (EID) and more well-established tropical disease pathogens present complex challenges to vaccine developers; in particular, neglected tropical diseases, which are most prevalent among the world’s poorest, include many pathogens with large sizes, multistage life cycles and a variety of nonhuman vectors. EID such as MERS-CoV and H7N9 are highly pathogenic for humans. For many of these pathogens, while their genomes are available, immune correlates of protection are currently unknown. These complexities make developing vaccines for EID and neglected tropical diseases all the more difficult. In this review, we describe the implementation of an immunoinformatics-driven approach to systematically search for key determinants of immunity in newly available genome sequence data and design vaccines. This approach holds promise for the development of 21st century vaccines, improving human health everywhere. PMID:25193104

Improving the Discoverability and Availability of Sample Data and Imagery in NASA's Astromaterials Curation Digital Repository Using a New Common Architecture for Sample Databases

NASA Technical Reports Server (NTRS)

Todd, N. S.; Evans, C.

2015-01-01

The Astromaterials Acquisition and Curation Office at NASA's Johnson Space Center (JSC) is the designated facility for curating all of NASA's extraterrestrial samples. The suite of collections includes the lunar samples from the Apollo missions, cosmic dust particles falling into the Earth's atmosphere, meteorites collected in Antarctica, comet and interstellar dust particles from the Stardust mission, asteroid particles from the Japanese Hayabusa mission, and solar wind atoms collected during the Genesis mission. To support planetary science research on these samples, NASA's Astromaterials Curation Office hosts the Astromaterials Curation Digital Repository, which provides descriptions of the missions and collections, and critical information about each individual sample. Our office is implementing several informatics initiatives with the goal of better serving the planetary research community. One of these initiatives aims to increase the availability and discoverability of sample data and images through the use of a newly designed common architecture for Astromaterials Curation databases.

An adaptable product for material processing and life science missions

NASA Technical Reports Server (NTRS)

Wassick, Gregory; Dobbs, Michael

1995-01-01

The Experiment Control System II (ECS-II) is designed to make available to the microgravity research community the same tools and mode of automated experimentation that their ground-based counterparts have enjoyed for the last two decades. The design goal was accomplished by combining commercial automation tools familiar to the experimenter community with system control components that interface with the on-orbit platform in a distributed architecture. The architecture insulates the tools necessary for managing a payload. By using commercial software and hardware components whenever possible, development costs were greatly reduced when compared to traditional space development projects. Using commercial-off-the-shelf (COTS) components also improved the usability documentation, and reducing the need for training of the system by providing familiar user interfaces, providing a wealth of readily available documentation, and reducing the need for training on system-specific details. The modularity of the distributed architecture makes it very amenable for modification to different on-orbit experiments requiring robotics-based automation.

Emerging leadership of surface micromachined MEMS for wavelength switching in telecommunications systems

NASA Astrophysics Data System (ADS)

Staple, Bevan D.; Muller, Lilac; Miller, David C.

2003-01-01

We introduce the Network Photonics" CrossWave as the first commercially-available, MEMS-based wavelength selective switch. The CrossWave combines the functionality of signal de-multiplexing, switching and re-multiplexing in a single all-optical operation using a dispersive element and 1-D MEMS. 1-D MEMS, where micromirrors are configured in a single array with a single mirror per wavelength, are fabricated in a standard surface micromachining process. In this paper we present three generations of micromirror designs. With proper design optimization and process improvements we have demonstrated exceptional mirror flatness (<16.2m-1 curvature), surface error (

NASA Prediction of Worldwide Energy Resource High Resolution Meteorology Data For Sustainable Building Design

NASA Technical Reports Server (NTRS)

Chandler, William S.; Hoell, James M.; Westberg, David; Zhang, Taiping; Stackhouse, Paul W., Jr.

2013-01-01

A primary objective of NASA's Prediction of Worldwide Energy Resource (POWER) project is to adapt and infuse NASA's solar and meteorological data into the energy, agricultural, and architectural industries. Improvements are continuously incorporated when higher resolution and longer-term data inputs become available. Climatological data previously provided via POWER web applications were three-hourly and 1x1 degree latitude/longitude. The NASA Modern Era Retrospective-analysis for Research and Applications (MERRA) data set provides higher resolution data products (hourly and 1/2x1/2 degree) covering the entire globe. Currently POWER solar and meteorological data are available for more than 30 years on hourly (meteorological only), daily, monthly and annual time scales. These data may be useful to several renewable energy sectors: solar and wind power generation, agricultural crop modeling, and sustainable buildings. A recent focus has been working with ASHRAE to assess complementing weather station data with MERRA data. ASHRAE building design parameters being investigated include heating/cooling degree days and climate zones.

Engineering for Autonomous Seismic Stations at the IRIS PASSCAL Instrument Center

NASA Astrophysics Data System (ADS)

Anderson, K. R.; Carpenter, P.; Beaudoin, B. C.; Parker, T.; Hebert, J.; Childs, D.; Chung, P.; Reusch, A. M.

2015-12-01

The NSF funded Incorporated Research Institutions for Seismology (IRIS) through New Mexico Tech operates the PASSCAL Instrument Center (PIC) in Socorro New Mexico. The engineering effort at the PIC seeks to optimize seismic station operations for all portable experiments, include those in extremely remote and harsh polar environments. Recent advances have resulted in improved station design, allowing improved operational efficiencies, data quality return and reduction in station logistics associated with installation, maintenance and decommissioning of stations. These include: Battery and power system designs. Incorporating primary Lithium Thionyl Chloride (LTC) technology with rechargeable Lithium Iron Phosphate (LiFePO4) batteries allows systems to operate in areas with long-term solar autonomy (high latitudes). Development includes charge controller systems to switch between primary and secondary technologies efficiently. Enclosures: Engineered solutions to efficiently manage waste heat, maintain operational environment and provide light-weight and durable housing for seismic instrumentation. Communications: In collaboration with Xeos Technologies Inc., we deliver Iridium-based SOH/Command and Control telemetry as well as full bandwidth seismic data communications in high latitude environments at low power requirements. Smaller-lighter-instrumentation: Through the GEOICE MRI, we are working with Nanometrics on next generation "all-in-one" seismic systems that can be deployed in polar environments - easing logistics, minimizing installation time and improving data quality return for these expensive deployments. All autonomous station designs are openly and freely available at the IRIS PASSCAL webpage (www.passcal.nmt.edu/polar/design-drawings). More information on GEOICE and data quality from various seismometer emplacements will be presented in other posters at this AGU meeting.

Interventions designed using quality improvement methods reduce the incidence of serious airway events and airway cardiac arrests during pediatric anesthesia.

PubMed

Spaeth, James P; Kreeger, Renee; Varughese, Anna M; Wittkugel, Eric

2016-02-01

Although serious complications during pediatric anesthesia are less common than they were 20 years ago, serious airway events continue to occur. Based on Quality Improvement (QI) data from our institution, a QI project was designed to reduce the incidence of serious airway events and airway cardiac arrests. A quality improvement team consisting of members of the Department of Anesthesia was formed and QI data from previous years were analyzed. The QI team developed a Smart Aim, Key Driver Diagram, and specific Interventions that focused on the accessibility of emergency drugs, the use of nondepolarizing muscle relaxants for endotracheal intubation in children 2 years and younger, and the presence of anesthesia providers until emergence from anesthesia in high-risk patients. The percentage of cases where muscle relaxants were utilized in children 2 years and younger for endotracheal intubation and where atropine and succinylcholine were readily available increased at both our base and outpatient facilities. Over the 2.5-year study period, the incidence of serious airway events and airway cardiac arrests was reduced by 44% and 59%, respectively compared to the previous 2-year period. We utilized QI methodology to design and implement a project which led to greater standardization of clinical practice within a large pediatric anesthesia group. Based on an understanding of system issues impacting our clinical practice, we designed and tested interventions that led to a significant reduction in the incidence of serious airway events and airway cardiac arrests. © 2015 John Wiley & Sons Ltd.

NAAQS Attainment and the PM2.5-Mortality Association ...

EPA Pesticide Factsheets

Background. Ambient air quality has been steadily improving since promulgation of National Ambient Air Quality Standards (NAAQS) by EPA in accordance with the Clean Air Act. In 1997, a standard for fine particulate matter (PM2.5) was promulgated for the first time. Although the impacts of this pollutant on health are well characterized, less is known whether the air pollution standards have resulted in improvements to public health. The objective of this study is to examine whether the attainment of the 1997 PM2.5 NAAQS improved cardiovascular mortality. Methods. We examined the impact of change in PM2.5 on change in cardiovascular mortality rate before and after 2005, when the 1997 standard designations were published (2000-2004 vs 2005-2010). We further examined how the association varied with respect to county-level NAAQS designations by stratifying in two ways: first, by the EPA Green Book status of attainment or nonattainment; second, by the county-level design values (DV) used for designation. We used linear regression and difference-in-difference models, adjusted for sociodemographic confounders. Results. Across the 619 U.S. counties with available PM2.5 data we observed a 1.21 µg/m3 mean decrease in the annual PM2.5 after 2005. Cardiovascular mortality rate, expressed as number of deaths/100,000 people, decreased by 63.1(95% CI 62.2, 64.1) in absolute terms after 2005 and by 1.10 (0.37, 1.82) for each 1 µg/m3 decrease in PM2.5. Nonattainment count

Testing the Birth Unit Design Spatial Evaluation Tool (BUDSET) in Australia: a pilot study.

PubMed

Foureur, Maralyn J; Leap, Nicky; Davis, Deborah L; Forbes, Ian F; Homer, Caroline E S

2011-01-01

To pilot test the Birth Unit Design Spatial Evaluation Tool (BUDSET) in an Australian maternity care setting to determine whether such an instrument can measure the optimality of different birth settings. Optimally designed spaces to give birth are likely to influence a woman's ability to experience physiologically normal labor and birth. This is important in the current industrialized environment, where increased caesarean section rates are causing concerns. The measurement of an optimal birth space is currently impossible, because there are limited tools available. A quantitative study was undertaken to pilot test the discriminant ability of the BUDSET in eight maternity units in New South Wales, Australia. Five auditors trained in the use of the BUDSET assessed the birth units using the BUDSET, which is based on 18 design principles and is divided into four domains (Fear Cascade, Facility, Aesthetics, and Support) with three to eight assessable items in each. Data were independently collected in eight birth units. Values for each of the domains were aggregated to provide an overall Optimality Score for each birth unit. A range of Optimality Scores was derived for each of the birth units (from 51 to 77 out of a possible 100 points). The BUDSET identified units with low-scoring domains. Essentially these were older units and conventional labor ward settings. The BUDSET provides a way to assess the optimality of birth units and determine which domain areas may need improvement. There is potential for improvements to existing birth spaces, and considerable improvement can be made with simple low-cost modifications. Further research is needed to validate the tool.

A cross-sectional study of the availability and pharmacist's knowledge of nano-pharmaceutical drugs in Palestinian hospitals.

PubMed

Assali, Mohyeddin; Shakaa, Ali; Abu-Hejleh, Sabaa; Abu-Omar, Reham; Karajeh, Nareman; Ajory, Nawal; Zyoud, Saed; Sweileh, Waleed

2018-04-05

Nanomedicine is the medical application of nanomaterials that may have an infinite size with the range less than 100 nm. This science has provided solutions to many of the current limitations in the diagnosis and treatment of diseases. Therefore, the pharmacist's knowledge and awareness of nano-pharmaceutical drugs will increase their availability in the market, and will improve the patient's compliance to their drug therapy. This study aimed to determine the availability of nano-pharmaceutical drugs in Palestinian hospitals and evaluate the extent of pharmacist's knowledge about them. A cross-sectional study design questionnaire was used to determine the availability of nano-pharmaceutical drugs based on the database of the ministry of health in the Palestinian hospitals (governmental, private and non- governmental organizations). Moreover, the knowledge of these nano-pharmaceutical drugs among pharmacists working in Palestinian hospitals was assessed based on developed questionnaire from the literature of the pharmaceutical formulations and nano-formulations. The variables were analyzed using Statistical Package for Social Sciences (SPSS 22). Fifty six pharmacists from 27 hospitals in the West bank completed the survey. The results regarding the availability of nano-pharmaceutical drugs indicated only eight available in hospitals with a frequency range 0-39.3%. Moreover, pharmacist's knowledge in the pharmaceutical formulations was better than that in nano-formulations. The availability of nano-pharmaceutical drugs in Palestinian hospitals was not adequate due to the lack of various nano-pharmaceutical drugs. The knowledge among pharmacists regarding nano-pharmaceutical drugs should be improved by providing courses in nanomedicine during the undergraduate pharmacy programs.

Performance analysis of complex repairable industrial systems using PSO and fuzzy confidence interval based methodology.

PubMed

Garg, Harish

2013-03-01

The main objective of the present paper is to propose a methodology for analyzing the behavior of the complex repairable industrial systems. In real-life situations, it is difficult to find the most optimal design policies for MTBF (mean time between failures), MTTR (mean time to repair) and related costs by utilizing available resources and uncertain data. For this, the availability-cost optimization model has been constructed for determining the optimal design parameters for improving the system design efficiency. The uncertainties in the data related to each component of the system are estimated with the help of fuzzy and statistical methodology in the form of the triangular fuzzy numbers. Using these data, the various reliability parameters, which affects the system performance, are obtained in the form of the fuzzy membership function by the proposed confidence interval based fuzzy Lambda-Tau (CIBFLT) methodology. The computed results by CIBFLT are compared with the existing fuzzy Lambda-Tau methodology. Sensitivity analysis on the system MTBF has also been addressed. The methodology has been illustrated through a case study of washing unit, the main part of the paper industry. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Abortion service provision in South Africa three years after liberalization of the law.

PubMed

Dickson, Kim Eva; Jewkes, Rachel K; Brown, Heather; Levin, Jonathan; Rees, Helen; Mavuya, Luyanda

2003-12-01

In 1996, South Africa introduced legislation that liberalized women's access to termination of pregnancy. This study presents the findings of a survey undertaken to describe the availability and accessibility of abortion services in 1999, three years after the law was passed. All facilities that had been officially designated to perform these services were contacted by telephone to determine whether they were providing the services, their capacity, whether they were performing second-trimester as well as first-trimester terminations, and how long women had to wait for these services. Nationally, 292 facilities had been designated, but in 1999 only 32 percent were functioning. Of the functioning facilities, 27 percent were in the private sector. Mapping of available services indicated that substantial parts of the country were entirely without such services. Half of the country's induced abortions were being performed in Gauteng province, although only 19 percent of women of reproductive age were living there. This finding indicates that service provision in other provinces was inadequate or lacking. Although in the first years following the new legislation efforts were made to establish abortion services, this study reveals gross inequality in service availability. Strategies for improving coverage are suggested.

Shaping innovations in long-term care for stroke survivors with multimorbidity through stakeholder engagement.

PubMed

Sadler, Euan; Porat, Talya; Marshall, Iain; Hoang, Uy; Curcin, Vasa; Wolfe, Charles D A; McKevitt, Christopher

2017-01-01

Stroke, like many long-term conditions, tends to be managed in isolation of its associated risk factors and multimorbidity. With increasing access to clinical and research data there is the potential to combine data from a variety of sources to inform interventions to improve healthcare. A 'Learning Health System' (LHS) is an innovative model of care which transforms integrated data into knowledge to improve healthcare. The objective of this study is to develop a process of engaging stakeholders in the use of clinical and research data to co-produce potential solutions, informed by a LHS, to improve long-term care for stroke survivors with multimorbidity. We used a stakeholder engagement study design informed by co-production principles to engage stakeholders, including service users, carers, general practitioners and other health and social care professionals, service managers, commissioners of services, policy makers, third sector representatives and researchers. Over a 10 month period we used a range of methods including stakeholder group meetings, focus groups, nominal group techniques (priority setting and consensus building) and interviews. Qualitative data were recorded, transcribed and analysed thematically. 37 participants took part in the study. The concept of how data might drive intervention development was difficult to convey and understand. The engagement process led to four priority areas for needs for data and information being identified by stakeholders: 1) improving continuity of care; 2) improving management of mental health consequences; 3) better access to health and social care; and 4) targeting multiple risk factors. These priorities informed preliminary design interventions. The final choice of intervention was agreed by consensus, informed by consideration of the gap in evidence and local service provision, and availability of robust data. This shaped a co-produced decision support tool to improve secondary prevention after stroke for further development. Stakeholder engagement to identify data-driven solutions is feasible but requires resources. While a number of potential interventions were identified, the final choice rested not just on stakeholder priorities but also on data availability. Further work is required to evaluate the impact and implementation of data-driven interventions for long-term stroke survivors.

Shaping innovations in long-term care for stroke survivors with multimorbidity through stakeholder engagement

PubMed Central

Porat, Talya; Marshall, Iain; Hoang, Uy; Curcin, Vasa; Wolfe, Charles D. A.; McKevitt, Christopher

2017-01-01

Background Stroke, like many long-term conditions, tends to be managed in isolation of its associated risk factors and multimorbidity. With increasing access to clinical and research data there is the potential to combine data from a variety of sources to inform interventions to improve healthcare. A ‘Learning Health System’ (LHS) is an innovative model of care which transforms integrated data into knowledge to improve healthcare. The objective of this study is to develop a process of engaging stakeholders in the use of clinical and research data to co-produce potential solutions, informed by a LHS, to improve long-term care for stroke survivors with multimorbidity. Methods We used a stakeholder engagement study design informed by co-production principles to engage stakeholders, including service users, carers, general practitioners and other health and social care professionals, service managers, commissioners of services, policy makers, third sector representatives and researchers. Over a 10 month period we used a range of methods including stakeholder group meetings, focus groups, nominal group techniques (priority setting and consensus building) and interviews. Qualitative data were recorded, transcribed and analysed thematically. Results 37 participants took part in the study. The concept of how data might drive intervention development was difficult to convey and understand. The engagement process led to four priority areas for needs for data and information being identified by stakeholders: 1) improving continuity of care; 2) improving management of mental health consequences; 3) better access to health and social care; and 4) targeting multiple risk factors. These priorities informed preliminary design interventions. The final choice of intervention was agreed by consensus, informed by consideration of the gap in evidence and local service provision, and availability of robust data. This shaped a co-produced decision support tool to improve secondary prevention after stroke for further development. Conclusions Stakeholder engagement to identify data-driven solutions is feasible but requires resources. While a number of potential interventions were identified, the final choice rested not just on stakeholder priorities but also on data availability. Further work is required to evaluate the impact and implementation of data-driven interventions for long-term stroke survivors. PMID:28475606

Interventions to improve child-parent-medical provider communication: A systematic review.

PubMed

Kodjebacheva, Gergana Damianova; Sabo, Tina; Xiong, Janet

2016-10-01

Research related to effective communication between children/parents and medical providers is limited. To review interventions seeking to improve communication between children/parents and medical providers. The inclusion criteria were interventions in peer-reviewed articles and dissertations in English. Because of the limited availability of pediatric communication research, no restrictions were placed on the year, design, and length of follow-up of the interventions. Out of 4163 articles in the CINAHL, Cochrane, EMBASE, ERIC, MEDLINE, and PsycINFO databases, 34 met the inclusion criteria. The design, strategies, measurement tools, results, and conflicts of interest of the interventions were reviewed. Most interventions were conducted in the United States, had a small sample size, and used a pre-posttest design. Fifteen were randomized controlled trials (RCTs). The most frequent intervention strategies were role-playing sessions and seminars for medical providers. Standardized children (i.e., fictitious child patients) were frequently used to help train physicians. Most interventions improved providers' interpersonal, patient-centered interviewing skills. Interventions that targeted parents involved booklets and role-playing to encourage questions. They improved parents' satisfaction and communication. An intervention that targeted youth used a video portraying how children can communicate better with physicians. Once the children aged 5-15 years watched the video, they wrote questions for their physicians prior to the medical visit. The experimental group of children had better rapport with physicians and could recall recommendations about medications more often than the control group. More RCTs involving children as active participants are needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Shuttle Liquid Fly Back Booster Configuration Options

NASA Technical Reports Server (NTRS)

Healy, T. J., Jr.

1998-01-01

This paper surveys the basic configuration options available to a Liquid Fly Back Booster (LFBB), integrated with the Space Shuttle system. The background of the development of the LFBB concept is given. The influence of the main booster engine (BME) installations and the Fly Back Engine (FBE) installation on the aerodynamic configurations are also discussed. Limits on the LFBB configuration design space imposed by the existing Shuttle flight and ground elements are also described. The objective of the paper is to put the constrains and design space for an LFBB in perspective. The object of the work is to define LFBB configurations that significantly improve safety, operability, reliability and performance of the Shuttle system and dramatically lower operations costs.

A bandwidth-efficient service for local information dissemination in sparse to dense roadways.

PubMed

Garcia-Lozano, Estrella; Campo, Celeste; Garcia-Rubio, Carlos; Cortes-Martin, Alberto; Rodriguez-Carrion, Alicia; Noriega-Vivas, Patricia

2013-07-05

Thanks to the research on Vehicular Ad Hoc Networks (VANETs), we will be able to deploy applications on roadways that will contribute to energy efficiency through a better planning of long trips. With this goal in mind, we have designed a gas/charging station advertising system, which takes advantage of the broadcast nature of the network. We have found that reducing the number of total sent packets is important, as it allows for a better use of the available bandwidth. We have designed improvements for a distance-based flooding scheme, so that it can support the advertising application with good results in sparse to dense roadway scenarios.

A Bandwidth-Efficient Service for Local Information Dissemination in Sparse to Dense Roadways

PubMed Central

Garcia-Lozano, Estrella; Campo, Celeste; Garcia-Rubio, Carlos; Cortes-Martin, Alberto; Rodriguez-Carrion, Alicia; Noriega-Vivas, Patricia

2013-01-01

Thanks to the research on Vehicular Ad Hoc Networks (VANETs), we will be able to deploy applications on roadways that will contribute to energy efficiency through a better planning of long trips. With this goal in mind, we have designed a gas/charging station advertising system, which takes advantage of the broadcast nature of the network. We have found that reducing the number of total sent packets is important, as it allows for a better use of the available bandwidth. We have designed improvements for a distance-based flooding scheme, so that it can support the advertising application with good results in sparse to dense roadway scenarios. PMID:23881130

An ABS control logic based on wheel force measurement

NASA Astrophysics Data System (ADS)

Capra, D.; Galvagno, E.; Ondrak, V.; van Leeuwen, B.; Vigliani, A.

2012-12-01

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre-road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force. The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.

Beyond the hearing aid: Assistive listening devices

NASA Astrophysics Data System (ADS)

Holmes, Alice E.

2003-04-01

Persons with hearing loss can obtain great benefit from hearing aids but there are many situations that traditional amplification devices will not provide enough help to ensure optimal communication. Assistive listening and signaling devices are designed to improve the communication of the hearing impaired in instances where traditional hearing aids are not sufficient. These devices are designed to help with problems created by listening in noise or against a competing message, improve distance listening, facilitate group conversation (help with problems created by rapidly changing speakers), and allow independence from friends and family. With the passage of the Americans with Disabilities Act in 1990, assistive listening devices (ALDs) are becoming more accessible to the public with hearing loss. Employers and public facilities must provide auxiliary aids and services when necessary to ensure effective communication for persons who are deaf or hard of hearing. However many professionals and persons with hearing loss are unaware of the various types and availability of ALDs. An overview of ALDs along with a discussion of their advantages and disadvantages will be given.

Biomimetic Sniffing Improves the Detection Performance of a 3D Printed Nose of a Dog and a Commercial Trace Vapor Detector

NASA Astrophysics Data System (ADS)

Staymates, Matthew E.; Maccrehan, William A.; Staymates, Jessica L.; Kunz, Roderick R.; Mendum, Thomas; Ong, Ta-Hsuan; Geurtsen, Geoffrey; Gillen, Greg J.; Craven, Brent A.

2016-12-01

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog’s nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the “aerodynamic reach” for inspiration of otherwise inaccessible odors. Chemical sampling and detection experiments quantified two modes of operation with the artificial nose-active sniffing and continuous inspiration-and demonstrated an increase in odorant detection by a factor of up to 18 for active sniffing. A 16-fold improvement in detection was demonstrated with a commercially-available explosives detector by applying this bio-inspired design principle and making the device “sniff” like a dog. These lessons learned from the dog may benefit the next-generation of vapor samplers for explosives, narcotics, pathogens, or even cancer, and could inform future bio-inspired designs for optimized sampling of odor plumes.

Biomimetic Sniffing Improves the Detection Performance of a 3D Printed Nose of a Dog and a Commercial Trace Vapor Detector

PubMed Central

Staymates, Matthew E.; MacCrehan, William A.; Staymates, Jessica L.; Kunz, Roderick R.; Mendum, Thomas; Ong, Ta-Hsuan; Geurtsen, Geoffrey; Gillen, Greg J.; Craven, Brent A.

2016-01-01

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog’s nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the “aerodynamic reach” for inspiration of otherwise inaccessible odors. Chemical sampling and detection experiments quantified two modes of operation with the artificial nose-active sniffing and continuous inspiration-and demonstrated an increase in odorant detection by a factor of up to 18 for active sniffing. A 16-fold improvement in detection was demonstrated with a commercially-available explosives detector by applying this bio-inspired design principle and making the device “sniff” like a dog. These lessons learned from the dog may benefit the next-generation of vapor samplers for explosives, narcotics, pathogens, or even cancer, and could inform future bio-inspired designs for optimized sampling of odor plumes. PMID:27906156

A shock wave capability for the improved Two-Dimensional Kinetics (TDK) computer program

NASA Technical Reports Server (NTRS)

Nickerson, G. R.; Dang, L. D.

1984-01-01

The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket engine performance prediction procedures. The purpose of this contract has been to improve the TDK computer program so that it can be applied to rocket engine designs of advanced type. In particular, future orbit transfer vehicles (OTV) will require rocket engines that operate at high expansion ratio, i.e., in excess of 200:1. Because only a limited length is available in the space shuttle bay, it is possible that OTV nozzles will be designed with both relatively short length and high expansion ratio. In this case, a shock wave may be present in the flow. The TDK computer program was modified to include the simulation of shock waves in the supersonic nozzle flow field. The shocks induced by the wall contour can produce strong perturbations of the flow, affecting downstream conditions which need to be considered for thrust chamber performance calculations.

QSRA: a quality-value guided de novo short read assembler.

PubMed

Bryant, Douglas W; Wong, Weng-Keen; Mockler, Todd C

2009-02-24

New rapid high-throughput sequencing technologies have sparked the creation of a new class of assembler. Since all high-throughput sequencing platforms incorporate errors in their output, short-read assemblers must be designed to account for this error while utilizing all available data. We have designed and implemented an assembler, Quality-value guided Short Read Assembler, created to take advantage of quality-value scores as a further method of dealing with error. Compared to previous published algorithms, our assembler shows significant improvements not only in speed but also in output quality. QSRA generally produced the highest genomic coverage, while being faster than VCAKE. QSRA is extremely competitive in its longest contig and N50/N80 contig lengths, producing results of similar quality to those of EDENA and VELVET. QSRA provides a step closer to the goal of de novo assembly of complex genomes, improving upon the original VCAKE algorithm by not only drastically reducing runtimes but also increasing the viability of the assembly algorithm through further error handling capabilities.

Evidence, Goals, and Outcomes in Stuttering Treatment: Applications With an Adolescent Who Stutters.

PubMed

Marcotte, Anne K

2018-01-09

The purpose of this clinical focus article is to summarize 1 possible process that a clinician might follow in designing and conducting a treatment program with John, a 14-year-old male individual who stutters. The available research evidence, practitioner experience, and consideration of individual preferences are combined to address goals, treatment procedures, and outcomes for John. The stuttering treatment research literature includes multiple well-designed reviews and individual studies that have shown the effectiveness of prolonged speech (and smooth speech and related variations) for improving stuttered speech and for improving social, emotional, cognitive, and related variables in adolescents who stutter. Based on that evidence, and incorporating the additional elements of practitioner experience and client preferences, this clinical focus article suggests that John would be likely to benefit from a treatment program based on prolonged speech. The basic structure of 1 possible such program is also described, with an emphasis on the goals and outcomes that John could be expected to achieve.

Concept, Design, and Prototyping of XSAS: A High Power Extendable Solar Array for CubeSat Applications

NASA Technical Reports Server (NTRS)

Senatore, Patrick; Klesh, Andrew; Zurbuchen, Thomas H.; McKague, Darren; Cutler, James

2010-01-01

CubeSats have proven themselves as a reliable and cost-effective method to perform experiments in space, but they are highly constrained by their specifications and size. One such constraint is the average continuous power, about 5 W, which is available to the typical CubeSat. To improve this constraint, we have developed the eXtendable Solar Array System (XSAS), a deployable solar array prototype in a CubeSat package, which can provide an average 23 W of continuous power. The prototype served as a technology demonstrator for the high risk mechanisms needed to release, deploy, and control the solar array. Aside from this drastic power increase, it is in the integration of each mechanism, their application within the small CubeSat form-factor, and the inherent passive control benefit of the deployed geometry that make XSAS a novel design. In this paper, we discuss the requirements and design process for the XSAS system and mechanical prototype, and provide qualitative and quantitative results from numerical simulations and prototype tests. We also discuss future work, including an upcoming NASA zero-gravity flight campaign, to further improve on XSAS and prepare it for future launch opportunities.

Tearing down the barriers to daily home hemodialysis and achieving the highest value renal therapy through holistic product design.

PubMed

Kenley, R S

1996-04-01

Renal therapy value can be defined as the ratio of outcomes achieved by a dialytic therapy to the total cost of providing that therapy. One desirable goal of any dialysis modality would be the achievement of maximum value. Unfortunately, with conventional hemodialysis and peritoneal dialysis modalities, improving outcomes has always been linked to a simultaneous increase in costs, thereby leaving value relatively unchanged. However, a new modality, daily home hemodialysis, finally may allow this linkage to be broken. The outcomes are dramatically improved as a result of a higher quantity and quality of dialysis dose resulting from the greater frequency of treatments. The costs can be reduced by minimizing the consumed items, avoiding the labor and overhead of dialysis clinics, and reducing the costs associated with morbidity. Provision of this therapy is, however, predicated on the availability of instrumentation designed specifically for it because conventional equipment designed for in-center use is not suitable. By starting with a clean sheet of paper and incorporating such features as insitu reuse of the entire extracorporeal circuit, remote telemonitoring, automated system disinfection, and integrated water purification, most of the impediments to performing this modality can be overcome.

Hubble Servicing Challenges Drive Innovation of Shuttle Rendezvous Techniques

NASA Technical Reports Server (NTRS)

Goodman, John L.; Walker, Stephen R.

2009-01-01

Hubble Space Telescope (HST) servicing, performed by Space Shuttle crews, has contributed to what is arguably one of the most successful astronomy missions ever flown. Both nominal and contingency proximity operations techniques were developed to enable successful servicing, while lowering the risk of damage to HST systems, and improve crew safety. Influencing the development of these techniques were the challenges presented by plume impingement and HST performance anomalies. The design of both the HST and the Space Shuttle was completed before the potential of HST contamination and structural damage by shuttle RCS jet plume impingement was fully understood. Relative navigation during proximity operations has been challenging, as HST was not equipped with relative navigation aids. Since HST reached orbit in 1990, proximity operations design for servicing missions has evolved as insight into plume contamination and dynamic pressure has improved and new relative navigation tools have become available. Servicing missions have provided NASA with opportunities to gain insight into servicing mission design and development of nominal and contingency procedures. The HST servicing experiences and lessons learned are applicable to other programs that perform on-orbit servicing and rendezvous, both human and robotic.

Improving data sharing in research with context-free encoded missing data.

PubMed

Hoevenaar-Blom, Marieke P; Guillemont, Juliette; Ngandu, Tiia; Beishuizen, Cathrien R L; Coley, Nicola; Moll van Charante, Eric P; Andrieu, Sandrine; Kivipelto, Miia; Soininen, Hilkka; Brayne, Carol; Meiller, Yannick; Richard, Edo

2017-01-01

Lack of attention to missing data in research may result in biased results, loss of power and reduced generalizability. Registering reasons for missing values at the time of data collection, or-in the case of sharing existing data-before making data available to other teams, can save time and efforts, improve scientific value and help to prevent erroneous assumptions and biased results. To ensure that encoding of missing data is sufficient to understand the reason why data are missing, it should ideally be context-free. Therefore, 11 context-free codes of missing data were carefully designed based on three completed randomized controlled clinical trials and tested in a new randomized controlled clinical trial by an international team consisting of clinical researchers and epidemiologists with extended experience in designing and conducting trials and an Information System expert. These codes can be divided into missing due to participant and/or participation characteristics (n = 6), missing by design (n = 4), and due to a procedural error (n = 1). Broad implementation of context-free missing data encoding may enhance the possibilities of data sharing and pooling, thus allowing more powerful analyses using existing data.

Trends in Contemporary Holistic Nursing Research: 2010-2015.

PubMed

Delaney, Colleen; McCaffrey, Ruth G; Barrere, Cynthia; Kenefick Moore, Amy; Dunn, Dorothy J; Miller, Robin J; Molony, Sheila L; Thomas, Debra; Twomey, Teresa C; Susan Zhu, Xiaoyuan

2018-01-01

The purpose of this study was to describe and summarize the characteristics of contemporary holistic nursing research (HNR) published nationally. A descriptive research design was used for this study. Data for this study came from a consecutive sample of 579 studies published in six journals determined as most consistent with the scope of holistic nursing from 2010 to 2015. The Johns Hopkins level of evidence was used to identify evidence generated, and two criteria-power analysis for quantitative research and trustworthiness for qualitative research-were used to describe overall quality of HNR. Of the studies, 275 were considered HNR and included in the analysis. Caring, energy therapies, knowledge and attitudes, and spirituality were the most common foci, and caring/healing, symptom management, quality of life, and depression were the outcomes most often examined. Of the studies, 56% were quantitative, 39% qualitative, and 5% mixed-methods designs. Only 32% of studies were funded. Level III evidence (nonexperimental, qualitative) was the most common level of evidence generated. Findings from this study suggest ways in which holistic nurse researchers can strengthen study designs and thus improve the quality of scientific evidence available for application into practice and improve health outcomes.

Energy management and vehicle synthesis

NASA Astrophysics Data System (ADS)

Czysz, P.; Murthy, S. N. B.

The major drivers in the development of launch vehicles for the twenty-first century are reduction in cost of vehicles and operations, continuous reusability, mission abort capability with vehicle recovery, and readiness. One approach to the design of such vehicles is to emphasize energy management and propulsion as being the principal means of improvements given the available industrial capability and the required freedom in selecting configuration concept geometries. A methodology has been developed for the rational synthesis of vehicles based on the setting up and utilization of available data and projections, and a reference vehicle. The application of the methodology is illustrated for a single stage to orbit (SSTO) with various limits for the use of airbreathing propulsion.

SYSTID - A flexible tool for the analysis of communication systems.

NASA Technical Reports Server (NTRS)

Dawson, C. T.; Tranter, W. H.

1972-01-01

Description of the System Time Domain Simulation (SYSTID) computer-aided analysis program which is specifically structured for communication systems analysis. The SYSTID program is user oriented so that very little knowledge of computer techniques and very little programming ability are required for proper application. The program is designed so that the user can go from a system block diagram to an accurate simulation by simply programming a single English language statement for each block in the system. The mathematical and functional models available in the SYSTID library are presented. An example problem is given which illustrates the ease of modeling communication systems. Examples of the outputs available are presented, and proposed improvements are summarized.

Energy management and vehicle synthesis

NASA Technical Reports Server (NTRS)

Czysz, P.; Murthy, S. N. B.

1995-01-01

The major drivers in the development of launch vehicles for the twenty-first century are reduction in cost of vehicles and operations, continuous reusability, mission abort capability with vehicle recovery, and readiness. One approach to the design of such vehicles is to emphasize energy management and propulsion as being the principal means of improvements given the available industrial capability and the required freedom in selecting configuration concept geometries. A methodology has been developed for the rational synthesis of vehicles based on the setting up and utilization of available data and projections, and a reference vehicle. The application of the methodology is illustrated for a single stage to orbit (SSTO) with various limits for the use of airbreathing propulsion.

A Topographic Field Trip of Washington, D.C. - A Cartographic Multimedia Application

USGS Publications Warehouse

,

1999-01-01

The U.S. Geological Survey (USGS) has produced ?A Topographic Field Trip of Washington, D.C.,' a multimedia CD-ROM that uses topographic maps to tour Washington, D.C. Although designed for the middle school grade level, it can also be used to teach introductory topographic map reading skills to any level. Two versions of ?A Topographic Field Trip of Washington, D.C.,? are available. The first version, for Macintosh? systems only, was developed and produced as a prototype with educational resources funds and is available free of charge. The second version, for dual platforms, Macintosh?, and Windows? systems, is a sales item. The dual platform version contains improvements in content and navigational capabilities.

Hydrologic Observatories: Design, Operation, and the Neuse Basin Prototype

NASA Astrophysics Data System (ADS)

Reckhow, K.; Band, L.

2003-12-01

Hydrologic observatories are conceived as major research facilities that will be available to the full hydrologic community, to facilitate comprehensive, cross-disciplinary and multi-scale measurements necessary to address the current and next generation of critical science and management issues. A network of hydrologic observatories is proposed that both develop national comparable, multidisciplinary data sets and provide study areas to allow scientists, through their own creativity, to make scientific breakthroughs that would be impossible without the proposed observatories. The core objective of an observatory is to improve predictive understanding of the flow paths, fluxes, and residence times of water, sediment and nutrients (the "core data") across a range of spatial and temporal scales across `interfaces'. To assess attainment of this objective, a benchmark will be established in the first year, and evaluated periodically. The benchmark should provide an estimate of prediction uncertainty at points in the stream across scale; the general principle is that predictive understanding must be demonstrated internal to the catchment as well as its outlet. The core data will be needed for practically any hydrologic study, yet absence of these data has been a barrier to larger scale studies in the past. However, advancement of hydrologic science facilitated by the network of hydrologic observatories is expected to focus on a set of science drivers, drawn from the major scientific questions posed by the set of NRC reports and refined into CUAHSI themes. These hypotheses will be tested at all observatories and will be used in the design to ensure the sufficiency of the data set. To make the observatories a national (and international) resource, a key aspect of the operation is the support of remote PI's. This support will include a resident staff of scientists and technicians on the order of 10 FTE's, availability of dormitory, laboratory, workshop space for all scientists, and the awarding of travel support out of observatory funds. The conflicting goals of support for a PI-designed observatory and a network of community-available observatories will be achieved by allocation of resources to assure both goals will be met. It is proposed that these resources be divided into three pools: Core data pool. Data to be collected by the observatory PI's and staff, and where possible, augmented by existing (e.g., USGS) data collection. Design pool. Available to support the designs of observatory PI's. Community pool. Available to non-PI scientists to test cross-observatory hypotheses. Application of these design and operation concepts to the design of the Neuse basin prototype hydrologic observatory is briefly discussed.

Rational design of an enzyme mutant for anti-cocaine therapeutics

NASA Astrophysics Data System (ADS)

Zheng, Fang; Zhan, Chang-Guo

2008-09-01

(-)-Cocaine is a widely abused drug and there is no available anti-cocaine therapeutic. The disastrous medical and social consequences of cocaine addiction have made the development of an effective pharmacological treatment a high priority. An ideal anti-cocaine medication would be to accelerate (-)-cocaine metabolism producing biologically inactive metabolites. The main metabolic pathway of cocaine in body is the hydrolysis at its benzoyl ester group. Reviewed in this article is the state-of-the-art computational design of high-activity mutants of human butyrylcholinesterase (BChE) against (-)-cocaine. The computational design of BChE mutants have been based on not only the structure of the enzyme, but also the detailed catalytic mechanisms for BChE-catalyzed hydrolysis of (-)-cocaine and (+)-cocaine. Computational studies of the detailed catalytic mechanisms and the structure-and-mechanism-based computational design have been carried out through the combined use of a variety of state-of-the-art techniques of molecular modeling. By using the computational insights into the catalytic mechanisms, a recently developed unique computational design strategy based on the simulation of the rate-determining transition state has been employed to design high-activity mutants of human BChE for hydrolysis of (-)-cocaine, leading to the exciting discovery of BChE mutants with a considerably improved catalytic efficiency against (-)-cocaine. One of the discovered BChE mutants (i.e., A199S/S287G/A328W/Y332G) has a ˜456-fold improved catalytic efficiency against (-)-cocaine. The encouraging outcome of the computational design and discovery effort demonstrates that the unique computational design approach based on the transition-state simulation is promising for rational enzyme redesign and drug discovery.

Interventions in small food stores to change the food environment, improve diet, and reduce risk of chronic disease.

PubMed

Gittelsohn, Joel; Rowan, Megan; Gadhoke, Preety

2012-01-01

Many small-store intervention trials have been conducted in the United States and other countries to improve the food environment and dietary behaviors associated with chronic disease risk. However, no systematic reviews of the methods and outcomes of these trials have been published. The objective of this study was to identify small-store interventions and to determine their impact on food availability, dietary behaviors, and psychosocial factors that influence chronic disease risk. From May 2009 through September 2010, we used PubMed, web-based searches, and listservs to identify small-store interventions that met the following criteria: 1) a focus on small food stores, 2) a completed impact evaluation, and 3) English-written documentation (peer-reviewed articles or other trial documents). We initially identified 28 trials; 16 met inclusion criteria and were used for analysis. We conducted interviews with project staff to obtain additional information. Reviewers extracted and reported data in a table format to ensure comparability between data. Reviewed trials were implemented in rural and urban settings in 6 countries and primarily targeted low-income racial/ethnic minority populations. Common intervention strategies included increasing the availability of healthier foods (particularly produce), point-of-purchase promotions (shelf labels, posters), and community engagement. Less common strategies included business training and nutrition education. We found significant effects for increased availability of healthy foods, improved sales of healthy foods, and improved consumer knowledge and dietary behaviors. Trial impact appeared to be linked to the increased provision of both healthy foods (supply) and health communications designed to increase consumption (demand).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hagen, E.W.

This report reviews and evaluates the performance of the compressed-air and pressurized-nitrogen gas systems in commercial nuclear power units. The information was collected from readily available operating experiences, licensee event reports, system designs in safety analysis reports, and regulatory documents. The results are collated and analyzed for significance and impact on power plant safety performance. Under certain circumstances, the fail-safe philosophy for a piece of equipment or subsystem of the compressed-air systems initiated a series of actions culminating in reactor transient or unit scram. However, based on this study of prevailing operating experiences, reclassifying the compressed-gas systems to a highermore » safety level will neither prevent (nor mitigate) the reoccurrences of such happenings nor alleviate nuclear power plant problems caused by inadequate maintenance, operating procedures, and/or practices. Conversely, because most of the problems were derived from the sources listed previously, upgrading of both maintenance and operating procedures will not only result in substantial improvement in the performance and availability of the compressed-air (and backup nitrogen) systems but in improved overall plant performance.« less

The Analysis of Image Segmentation Hierarchies with a Graph-based Knowledge Discovery System

NASA Technical Reports Server (NTRS)

Tilton, James C.; Cooke, diane J.; Ketkar, Nikhil; Aksoy, Selim

2008-01-01

Currently available pixel-based analysis techniques do not effectively extract the information content from the increasingly available high spatial resolution remotely sensed imagery data. A general consensus is that object-based image analysis (OBIA) is required to effectively analyze this type of data. OBIA is usually a two-stage process; image segmentation followed by an analysis of the segmented objects. We are exploring an approach to OBIA in which hierarchical image segmentations provided by the Recursive Hierarchical Segmentation (RHSEG) software developed at NASA GSFC are analyzed by the Subdue graph-based knowledge discovery system developed by a team at Washington State University. In this paper we discuss out initial approach to representing the RHSEG-produced hierarchical image segmentations in a graphical form understandable by Subdue, and provide results on real and simulated data. We also discuss planned improvements designed to more effectively and completely convey the hierarchical segmentation information to Subdue and to improve processing efficiency.

NASA Land Information System (LIS) Water Availability to Support Reclamation ET Estimation

NASA Technical Reports Server (NTRS)

Toll, David; Arsenault, Kristi; Pinheiro, Ana; Peters-Lidard, Christa; Houser, Paul; Kumar, Sujay; Engman, Ted; Nigro, Joe; Triggs, Jonathan

2005-01-01

The U.S. Bureau of Reclamation identified the remote sensing of evapotranspiration (ET) as an important water flux for study and designated a test site in the Lower Colorado River basin. A consortium of groups will work together with the goal to develop more accurate and cost effective techniques using the enhanced spatial and temporal coverage afforded by remote sensing. ET is a critical water loss flux where improved estimation should lead to better management of Reclamation responsibilities. There are several areas where NASA satellite and modeling data may be useful to meet Reclamation's objectives for improved ET estimation. In this paper we outline one possible contribution to use NASA's data integration capability of the Land Information System (LIS) to provide a merger of observational (in situ and satellite) with physical process models to provide estimates of ET and other water availability outputs (e.g., runoff, soil moisture) retrospectively, in near real-time, and also providing short-term predictions.

Implementing bright light treatment for MSFC payload operations shiftworkers

NASA Technical Reports Server (NTRS)

Hayes, Benita C.; Stewart, Karen T.; Eastman, Charmane I.

1994-01-01

Intense light can phase-shift circadian rhythms and improve performance, sleep, and wellbeing during shiftwork simulations, but to date there have been very few attempts to administer light treatment to real shiftworkers. We have developed procedures for implementing light treatment and have conducted controlled trials of light treatment for MSFC Payload Operations staff during the USML-1 mission. We found that treatment had beneficial effects on fatigue, alertness, self-rated job performance, sleep, mood, and work attendance. Although there are portable bright light boxes commercially available, there is no testing protocol and little performance information available. We measure the illuminance of two candidate boxes for use in this study and found that levels were consistently lower than those advertised by manufacturers. A device was developed to enhance the illuminance output of such units. This device increased the illuminance by at least 60 % and provided additional improvements in visual comfort and overall exposure. Both the design of this device and some suggested procedures for evaluating light devices are presented.

Federal Educational Assistance Programs Available to Service Members: Program Features and Recommendations for Improved Delivery

DTIC Science & Technology

2015-01-01

psychology, this would be referred to as an untreated control group design with pretest and posttest (those who did not use the program with those who...3 Using primarily a qualitative approach, Steele, Salcedo, and Coley, 2011, conducted surveys and on -campus focus groups with Post-9/11 GI Bill...historical information on participants’ and a control group of nonparticipants’ sociodemo- graphic characteristics and service-related characteristics (e.g

The Importance of Human Reliability Analysis in Human Space Flight: Understanding the Risks

NASA Technical Reports Server (NTRS)

Hamlin, Teri L.

2010-01-01

HRA is a method used to describe, qualitatively and quantitatively, the occurrence of human failures in the operation of complex systems that affect availability and reliability. Modeling human actions with their corresponding failure in a PRA (Probabilistic Risk Assessment) provides a more complete picture of the risk and risk contributions. A high quality HRA can provide valuable information on potential areas for improvement, including training, procedural, equipment design and need for automation.

Improving the Analysis Capabilities of the Synthetic Theater Operations Research Model (STORM)

DTIC Science & Technology

2014-09-01

course of action CSG carrier strike group DMSO defense modeling and simulation DOD Department of Defense DOE design of experiments ESG...development of an overall objective or end-state; a ways ( courses of action); and a means (available resources). STORM is a campaign analysis tool that...refers to the courses of action (COA) that are carefully planned out in advance by individuals relevant to a specific campaign (such as N81). For

General Mission Analysis Tool (GMAT): Mission, Vision, and Business Case

NASA Technical Reports Server (NTRS)

Hughes, Steven P.

2007-01-01

The Goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities businesses and other government organizations; and to share that technology in an open and unhindered way. GMAT's a free and open source software system; free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or future technology development.

Design of Multi-Order Diffractive THz Lenses

DTIC Science & Technology

2012-09-23

surface. This makes the fabrication process easier and more accurate, thereby improving optical quality. A CNC lathe can be used to carve the lens out...for low-end THz operation (200-800 GHz). The lens was fabricated in Teflon with a small CNC lathe and can be seen in Fig. 3. With only 4 zones...excellent THz transparency and is readily available. Once the CNC turning was complete, the lens was separated from its substrate with a band-saw and

Improving Large Cetacean Implantable Satellite Tag Designs to Maximize Tag Robustness and Minimize Health Effects to Individual Animals

DTIC Science & Technology

2015-09-30

Olympia, WA, 98501 & National Marine Mammal Laboratory Alaska Fisheries Science Center, NOAA Fisheries 7600 Sand Point Way NE Seattle, WA...to Maximize Tag Robustness and Minimize Health Effects to Individual Animals Alexandre N. Zerbini Cascadia Research Collective 218 ½ 4 th Ave W...available to the marine mammal community after the conclusion of the project. This study has been carried out by scientists and engineers from eight

Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps

PubMed Central

Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

2016-01-01

Background Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. Objective The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Methods Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? Results General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app that utilizes specific Rwandan medical education resources. Based on our results, we propose a mobile medical education app that could provide many benefits such as rapid decision making with lower error rates, increasing the quality of data management and accessibility, and improving practice efficiency and knowledge. In areas where Internet access is limited, the proposed mobile medical education app would need to run on a mobile device without Internet access. Conclusions A user-centered design approach was adopted, starting with a needs assessment with representative end users, which provided recommendations for the development of a mobile medical education app specific to Rwanda. Specific app features were identified through the needs assessment and it was evident that there will be future benefits to ongoing incorporation of user-centered design methods to better inform the software development and improve its usability. Results of the user-centered design reported here can inform other medical education technology developments in LMIC to ensure that technologies developed are usable by all stakeholders. PMID:27731861

Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps.

PubMed

Rusatira, Jean Christophe; Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

2016-06-01

Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app that utilizes specific Rwandan medical education resources. Based on our results, we propose a mobile medical education app that could provide many benefits such as rapid decision making with lower error rates, increasing the quality of data management and accessibility, and improving practice efficiency and knowledge. In areas where Internet access is limited, the proposed mobile medical education app would need to run on a mobile device without Internet access. A user-centered design approach was adopted, starting with a needs assessment with representative end users, which provided recommendations for the development of a mobile medical education app specific to Rwanda. Specific app features were identified through the needs assessment and it was evident that there will be future benefits to ongoing incorporation of user-centered design methods to better inform the software development and improve its usability. Results of the user-centered design reported here can inform other medical education technology developments in LMIC to ensure that technologies developed are usable by all stakeholders.

Design concepts for the Cherenkov Telescope Array CTA: an advanced facility for ground-based high-energy gamma-ray astronomy

NASA Astrophysics Data System (ADS)

Actis, M.; Agnetta, G.; Aharonian, F.; Akhperjanian, A.; Aleksić, J.; Aliu, E.; Allan, D.; Allekotte, I.; Antico, F.; Antonelli, L. A.; Antoranz, P.; Aravantinos, A.; Arlen, T.; Arnaldi, H.; Artmann, S.; Asano, K.; Asorey, H.; Bähr, J.; Bais, A.; Baixeras, C.; Bajtlik, S.; Balis, D.; Bamba, A.; Barbier, C.; Barceló, M.; Barnacka, A.; Barnstedt, J.; Barres de Almeida, U.; Barrio, J. A.; Basso, S.; Bastieri, D.; Bauer, C.; Becerra, J.; Becherini, Y.; Bechtol, K.; Becker, J.; Beckmann, V.; Bednarek, W.; Behera, B.; Beilicke, M.; Belluso, M.; Benallou, M.; Benbow, W.; Berdugo, J.; Berger, K.; Bernardino, T.; Bernlöhr, K.; Biland, A.; Billotta, S.; Bird, T.; Birsin, E.; Bissaldi, E.; Blake, S.; Blanch, O.; Bobkov, A. A.; Bogacz, L.; Bogdan, M.; Boisson, C.; Boix, J.; Bolmont, J.; Bonanno, G.; Bonardi, A.; Bonev, T.; Borkowski, J.; Botner, O.; Bottani, A.; Bourgeat, M.; Boutonnet, C.; Bouvier, A.; Brau-Nogué, S.; Braun, I.; Bretz, T.; Briggs, M. S.; Brun, P.; Brunetti, L.; Buckley, J. H.; Bugaev, V.; Bühler, R.; Bulik, T.; Busetto, G.; Buson, S.; Byrum, K.; Cailles, M.; Cameron, R.; Canestrari, R.; Cantu, S.; Carmona, E.; Carosi, A.; Carr, J.; Carton, P. H.; Casiraghi, M.; Castarede, H.; Catalano, O.; Cavazzani, S.; Cazaux, S.; Cerruti, B.; Cerruti, M.; Chadwick, P. M.; Chiang, J.; Chikawa, M.; Cieślar, M.; Ciesielska, M.; Cillis, A.; Clerc, C.; Colin, P.; Colomé, J.; Compin, M.; Conconi, P.; Connaughton, V.; Conrad, J.; Contreras, J. L.; Coppi, P.; Corlier, M.; Corona, P.; Corpace, O.; Corti, D.; Cortina, J.; Costantini, H.; Cotter, G.; Courty, B.; Couturier, S.; Covino, S.; Croston, J.; Cusumano, G.; Daniel, M. K.; Dazzi, F.; de Angelis, A.; de Cea Del Pozo, E.; de Gouveia Dal Pino, E. M.; de Jager, O.; de La Calle Pérez, I.; de La Vega, G.; de Lotto, B.; de Naurois, M.; de Oña Wilhelmi, E.; de Souza, V.; Decerprit, B.; Deil, C.; Delagnes, E.; Deleglise, G.; Delgado, C.; Dettlaff, T.; di Paolo, A.; di Pierro, F.; Díaz, C.; Dick, J.; Dickinson, H.; Digel, S. W.; Dimitrov, D.; Disset, G.; Djannati-Ataï, A.; Doert, M.; Domainko, W.; Dorner, D.; Doro, M.; Dournaux, J.-L.; Dravins, D.; Drury, L.; Dubois, F.; Dubois, R.; Dubus, G.; Dufour, C.; Durand, D.; Dyks, J.; Dyrda, M.; Edy, E.; Egberts, K.; Eleftheriadis, C.; Elles, S.; Emmanoulopoulos, D.; Enomoto, R.; Ernenwein, J.-P.; Errando, M.; Etchegoyen, A.; Falcone, A. D.; Farakos, K.; Farnier, C.; Federici, S.; Feinstein, F.; Ferenc, D.; Fillin-Martino, E.; Fink, D.; Finley, C.; Finley, J. P.; Firpo, R.; Florin, D.; Föhr, C.; Fokitis, E.; Font, Ll.; Fontaine, G.; Fontana, A.; Förster, A.; Fortson, L.; Fouque, N.; Fransson, C.; Fraser, G. W.; Fresnillo, L.; Fruck, C.; Fujita, Y.; Fukazawa, Y.; Funk, S.; Gäbele, W.; Gabici, S.; Gadola, A.; Galante, N.; Gallant, Y.; García, B.; García López, R. J.; Garrido, D.; Garrido, L.; Gascón, D.; Gasq, C.; Gaug, M.; Gaweda, J.; Geffroy, N.; Ghag, C.; Ghedina, A.; Ghigo, M.; Gianakaki, E.; Giarrusso, S.; Giavitto, G.; Giebels, B.; Giro, E.; Giubilato, P.; Glanzman, T.; Glicenstein, J.-F.; Gochna, M.; Golev, V.; Gómez Berisso, M.; González, A.; González, F.; Grañena, F.; Graciani, R.; Granot, J.; Gredig, R.; Green, A.; Greenshaw, T.; Grimm, O.; Grube, J.; Grudzińska, M.; Grygorczuk, J.; Guarino, V.; Guglielmi, L.; Guilloux, F.; Gunji, S.; Gyuk, G.; Hadasch, D.; Haefner, D.; Hagiwara, R.; Hahn, J.; Hallgren, A.; Hara, S.; Hardcastle, M. J.; Hassan, T.; Haubold, T.; Hauser, M.; Hayashida, M.; Heller, R.; Henri, G.; Hermann, G.; Herrero, A.; Hinton, J. A.; Hoffmann, D.; Hofmann, W.; Hofverberg, P.; Horns, D.; Hrupec, D.; Huan, H.; Huber, B.; Huet, J.-M.; Hughes, G.; Hultquist, K.; Humensky, T. B.; Huppert, J.-F.; Ibarra, A.; Illa, J. M.; Ingjald, J.; Inoue, Y.; Inoue, S.; Ioka, K.; Jablonski, C.; Jacholkowska, A.; Janiak, M.; Jean, P.; Jensen, H.; Jogler, T.; Jung, I.; Kaaret, P.; Kabuki, S.; Kakuwa, J.; Kalkuhl, C.; Kankanyan, R.; Kapala, M.; Karastergiou, A.; Karczewski, M.; Karkar, S.; Karlsson, N.; Kasperek, J.; Katagiri, H.; Katarzyński, K.; Kawanaka, N.; Kȩdziora, B.; Kendziorra, E.; Khélifi, B.; Kieda, D.; Kifune, T.; Kihm, T.; Klepser, S.; Kluźniak, W.; Knapp, J.; Knappy, A. R.; Kneiske, T.; Knödlseder, J.; Köck, F.; Kodani, K.; Kohri, K.; Kokkotas, K.; Komin, N.; Konopelko, A.; Kosack, K.; Kossakowski, R.; Kostka, P.; Kotuła, J.; Kowal, G.; Kozioł, J.; Krähenbühl, T.; Krause, J.; Krawczynski, H.; Krennrich, F.; Kretzschmann, A.; Kubo, H.; Kudryavtsev, V. A.; Kushida, J.; La Barbera, N.; La Parola, V.; La Rosa, G.; López, A.; Lamanna, G.; Laporte, P.; Lavalley, C.; Le Flour, T.; Le Padellec, A.; Lenain, J.-P.; Lessio, L.; Lieunard, B.; Lindfors, E.; Liolios, A.; Lohse, T.; Lombardi, S.; Lopatin, A.; Lorenz, E.; Lubiński, P.; Luz, O.; Lyard, E.; Maccarone, M. C.; Maccarone, T.; Maier, G.; Majumdar, P.; Maltezos, S.; Małkiewicz, P.; Mañá, C.; Manalaysay, A.; Maneva, G.; Mangano, A.; Manigot, P.; Marín, J.; Mariotti, M.; Markoff, S.; Martínez, G.; Martínez, M.; Mastichiadis, A.; Matsumoto, H.; Mattiazzo, S.; Mazin, D.; McComb, T. J. L.; McCubbin, N.; McHardy, I.; Medina, C.; Melkumyan, D.; Mendes, A.; Mertsch, P.; Meucci, M.; Michałowski, J.; Micolon, P.; Mineo, T.; Mirabal, N.; Mirabel, F.; Miranda, J. M.; Mirzoyan, R.; Mizuno, T.; Moal, B.; Moderski, R.; Molinari, E.; Monteiro, I.; Moralejo, A.; Morello, C.; Mori, K.; Motta, G.; Mottez, F.; Moulin, E.; Mukherjee, R.; Munar, P.; Muraishi, H.; Murase, K.; Murphy, A. Stj.; Nagataki, S.; Naito, T.; Nakamori, T.; Nakayama, K.; Naumann, C.; Naumann, D.; Nayman, P.; Nedbal, D.; Niedźwiecki, A.; Niemiec, J.; Nikolaidis, A.; Nishijima, K.; Nolan, S. J.; Nowak, N.; O'Brien, P. T.; Ochoa, I.; Ohira, Y.; Ohishi, M.; Ohka, H.; Okumura, A.; Olivetto, C.; Ong, R. A.; Orito, R.; Orr, M.; Osborne, J. P.; Ostrowski, M.; Otero, L.; Otte, A. N.; Ovcharov, E.; Oya, I.; Oziȩbło, A.; Paiano, S.; Pallota, J.; Panazol, J. L.; Paneque, D.; Panter, M.; Paoletti, R.; Papyan, G.; Paredes, J. M.; Pareschi, G.; Parsons, R. D.; Paz Arribas, M.; Pedaletti, G.; Pepato, A.; Persic, M.; Petrucci, P. O.; Peyaud, B.; Piechocki, W.; Pita, S.; Pivato, G.; Płatos, Ł.; Platzer, R.; Pogosyan, L.; Pohl, M.; Pojmański, G.; Ponz, J. D.; Potter, W.; Prandini, E.; Preece, R.; Prokoph, H.; Pühlhofer, G.; Punch, M.; Quel, E.; Quirrenbach, A.; Rajda, P.; Rando, R.; Rataj, M.; Raue, M.; Reimann, C.; Reimann, O.; Reimer, A.; Reimer, O.; Renaud, M.; Renner, S.; Reymond, J.-M.; Rhode, W.; Ribó, M.; Ribordy, M.; Rico, J.; Rieger, F.; Ringegni, P.; Ripken, J.; Ristori, P.; Rivoire, S.; Rob, L.; Rodriguez, S.; Roeser, U.; Romano, P.; Romero, G. E.; Rosier-Lees, S.; Rovero, A. C.; Roy, F.; Royer, S.; Rudak, B.; Rulten, C. B.; Ruppel, J.; Russo, F.; Ryde, F.; Sacco, B.; Saggion, A.; Sahakian, V.; Saito, K.; Saito, T.; Sakaki, N.; Salazar, E.; Salini, A.; Sánchez, F.; Sánchez Conde, M. Á.; Santangelo, A.; Santos, E. M.; Sanuy, A.; Sapozhnikov, L.; Sarkar, S.; Scalzotto, V.; Scapin, V.; Scarcioffolo, M.; Schanz, T.; Schlenstedt, S.; Schlickeiser, R.; Schmidt, T.; Schmoll, J.; Schroedter, M.; Schultz, C.; Schultze, J.; Schulz, A.; Schwanke, U.; Schwarzburg, S.; Schweizer, T.; Seiradakis, J.; Selmane, S.; Seweryn, K.; Shayduk, M.; Shellard, R. C.; Shibata, T.; Sikora, M.; Silk, J.; Sillanpää, A.; Sitarek, J.; Skole, C.; Smith, N.; Sobczyńska, D.; Sofo Haro, M.; Sol, H.; Spanier, F.; Spiga, D.; Spyrou, S.; Stamatescu, V.; Stamerra, A.; Starling, R. L. C.; Stawarz, Ł.; Steenkamp, R.; Stegmann, C.; Steiner, S.; Stergioulas, N.; Sternberger, R.; Stinzing, F.; Stodulski, M.; Straumann, U.; Suárez, A.; Suchenek, M.; Sugawara, R.; Sulanke, K. H.; Sun, S.; Supanitsky, A. D.; Sutcliffe, P.; Szanecki, M.; Szepieniec, T.; Szostek, A.; Szymkowiak, A.; Tagliaferri, G.; Tajima, H.; Takahashi, H.; Takahashi, K.; Takalo, L.; Takami, H.; Talbot, R. G.; Tam, P. H.; Tanaka, M.; Tanimori, T.; Tavani, M.; Tavernet, J.-P.; Tchernin, C.; Tejedor, L. A.; Telezhinsky, I.; Temnikov, P.; Tenzer, C.; Terada, Y.; Terrier, R.; Teshima, M.; Testa, V.; Tibaldo, L.; Tibolla, O.; Tluczykont, M.; Todero Peixoto, C. J.; Tokanai, F.; Tokarz, M.; Toma, K.; Torres, D. F.; Tosti, G.; Totani, T.; Toussenel, F.; Vallania, P.; Vallejo, G.; van der Walt, J.; van Eldik, C.; Vandenbroucke, J.; Vankov, H.; Vasileiadis, G.; Vassiliev, V. V.; Vegas, I.; Venter, L.; Vercellone, S.; Veyssiere, C.; Vialle, J. P.; Videla, M.; Vincent, P.; Vink, J.; Vlahakis, N.; Vlahos, L.; Vogler, P.; Vollhardt, A.; Volpe, F.; von Gunten, H. P.; Vorobiov, S.; Wagner, S.; Wagner, R. M.; Wagner, B.; Wakely, S. P.; Walter, P.; Walter, R.; Warwick, R.; Wawer, P.; Wawrzaszek, R.; Webb, N.; Wegner, P.; Weinstein, A.; Weitzel, Q.; Welsing, R.; Wetteskind, H.; White, R.; Wierzcholska, A.; Wilkinson, M. I.; Williams, D. A.; Winde, M.; Wischnewski, R.; Wiśniewski, Ł.; Wolczko, A.; Wood, M.; Xiong, Q.; Yamamoto, T.; Yamaoka, K.; Yamazaki, R.; Yanagita, S.; Yoffo, B.; Yonetani, M.; Yoshida, A.; Yoshida, T.; Yoshikoshi, T.; Zabalza, V.; Zagdański, A.; Zajczyk, A.; Zdziarski, A.; Zech, A.; Ziȩtara, K.; Ziółkowski, P.; Zitelli, V.; Zychowski, P.

2011-12-01

Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV-10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will consist of two arrays (one in the north, one in the south) for full sky coverage and will be operated as open observatory. The design of CTA is based on currently available technology. This document reports on the status and presents the major design concepts of CTA.

A pluggable framework for parallel pairwise sequence search.

PubMed

Archuleta, Jeremy; Feng, Wu-chun; Tilevich, Eli

2007-01-01

The current and near future of the computing industry is one of multi-core and multi-processor technology. Most existing sequence-search tools have been designed with a focus on single-core, single-processor systems. This discrepancy between software design and hardware architecture substantially hinders sequence-search performance by not allowing full utilization of the hardware. This paper presents a novel framework that will aid the conversion of serial sequence-search tools into a parallel version that can take full advantage of the available hardware. The framework, which is based on a software architecture called mixin layers with refined roles, enables modules to be plugged into the framework with minimal effort. The inherent modular design improves maintenance and extensibility, thus opening up a plethora of opportunities for advanced algorithmic features to be developed and incorporated while routine maintenance of the codebase persists.

The Glostavent: evolution of an anaesthetic machine for developing countries.

PubMed

Beringer, R M; Eltringham, R J

2008-05-01

The sophisticated anaesthetic machines designed for use in modem hospitals are not appropriate for many parts of the developing world, as they are reliant on regular servicing by skilled engineers and an uninterrupted supply of electricity and compressed gases, which are not always available. The Glostavent has been designed specifically to meet the challenges faced by anaesthetists working in these countries. It is robust, simple to use, economical, easy to service and will continue to run during an interruption of the supply of oxygen or electricity. Feedback from widespread use throughout the developing world over the last 10 years has led to significant improvements to the original design. This article describes the basic components of the original version and the modifications which have been introduced as a result of practical experience in the developing world.

Developing a Cyberinfrastructure for integrated assessments of environmental contaminants.

PubMed

Kaur, Taranjit; Singh, Jatinder; Goodale, Wing M; Kramar, David; Nelson, Peter

2005-03-01

The objective of this study was to design and implement prototype software for capturing field data and automating the process for reporting and analyzing the distribution of mercury. The four phase process used to design, develop, deploy and evaluate the prototype software is described. Two different development strategies were used: (1) design of a mobile data collection application intended to capture field data in a meaningful format and automate transfer into user databases, followed by (2) a re-engineering of the original software to develop an integrated database environment with improved methods for aggregating and sharing data. Results demonstrated that innovative use of commercially available hardware and software components can lead to the development of an end-to-end digital cyberinfrastructure that captures, records, stores, transmits, compiles and integrates multi-source data as it relates to mercury.

Exploring Innovative Solutions for Quality of Life and Care of Bed-Ridden Nursing Home Residents through Codesign Sessions

PubMed Central

van Hoof, J.; Wetzels, M. H.; Dooremalen, A. M. C.; Overdiep, R. A.; Nieboer, M. E.; Eyck, A. M. E.; van Gorkom, P. J. L. M.; Zwerts-Verhelst, E. L. M.; Aarts, S.; Vissers-Luijcks, C.; van der Voort, C. S.; Moonen, M. J. G. A.; van de Vrande, H. A.; van Dijck-Heinen, C. J. M. L.; Wouters, E. J. M.

2015-01-01

Bed-ridden nursing home residents are in need of environments which are homelike and facilitate the provision of care. Design guidance for this group of older people is limited. This study concerned the exploration and generation of innovative environmental enrichment scenarios for bed-ridden residents. This exploration was conducted through a combination of participatory action research with user-centred design involving 56 professional stakeholders in interactive work sessions. This study identified numerous design solutions, both concepts and products that are available on the marketplace and that on a higher level relate to improvements in resident autonomy and the supply of technological items and architectural features. The methodology chosen can be used to explore the creative potential of stakeholders from the domain of healthcare in product innovation. PMID:26543647

Effects of electrons and protons on science instruments

NASA Technical Reports Server (NTRS)

Parker, R. H.

1972-01-01

The radiation effects on typical science instruments according to the Jupiter trapped radiation design restraint model are described, and specific aspects of the model where an improved understanding would be beneficial are suggested. The spacecraft design used is the TOPS 12L configuration. Ionization and displacement damage are considered, and damage criteria are placed on the most sensitive components. Possible protective measures are mentioned: selecting components as radiation resistant as possible, using a difference in desired and undesired signal shapes for electronic shielding, orienting and locating the component on the spacecraft for better shielding, and adding passive shields to protect specific components. Available options are listed in decreasing order of attractiveness: attempt to lower the design restraints without compromising the success of the missions, trade off experiment objectives for increased reliability, alter the trajectory, and remove sensitive instruments from the payload.

Assessment of disk MHD generators for a base load powerplant

NASA Technical Reports Server (NTRS)

Chubb, D. L.; Retallick, F. D.; Lu, C. L.; Stella, M.; Teare, J. D.; Loubsky, W. J.; Louis, J. F.; Misra, B.

1981-01-01

Results from a study of the disk MHD generator are presented. Both open and closed cycle disk systems were investigated. Costing of the open cycle disk components (nozzle, channel, diffuser, radiant boiler, magnet and power management) was done. However, no detailed costing was done for the closed cycle systems. Preliminary plant design for the open cycle systems was also completed. Based on the system study results, an economic assessment of the open cycle systems is presented. Costs of the open cycle disk conponents are less than comparable linear generator components. Also, costs of electricity for the open cycle disk systems are competitive with comparable linear systems. Advantages of the disk design simplicity are considered. Improvements in the channel availability or a reduction in the channel lifetime requirement are possible as a result of the disk design.

Interventions for the control of diarrhoeal diseases among young children: improving water supplies and excreta disposal facilities*

PubMed Central

Esrey, S. A.; Feachem, R. G.; Hughes, J. M.

1985-01-01

A theoretical model is proposed that relates the level of ingestion of diarrhoea-causing pathogens to the frequency of diarrhoea in the community. The implications of this model are that, in poor communities with inadequate water supply and excreta disposal, reducing the level of enteric pathogen ingestion by a given amount will have a greater impact on diarrhoea mortality rates than on morbidity rates, a greater impact on the incidence rate of severe diarrhoea than on that of mild diarrhoea, and a greater impact on diarrhoea caused by pathogens having high infectious doses than on diarrhoea caused by pathogens of a low infectious dose. The impact of water supply and sanitation on diarrhoea, related infections, nutritional status, and mortality is analysed by reviewing 67 studies from 28 countries. The median reductions in diarrhoea morbidity rates are 22% from all studies and 27% from a few better-designed studies. All studies of the impact on total mortality rates show a median reduction of 21%, while the few better-designed studies give a median reduction of 30%. Improvements in water quality have less of an impact than improvements in water availability or excreta disposal. PMID:3878742

Improving the growth of CZT crystals for radiation detectors: a modeling perspective

NASA Astrophysics Data System (ADS)

Derby, Jeffrey J.; Zhang, Nan; Yeckel, Andrew

2012-10-01

The availability of large, single crystals of cadmium zinc telluride (CZT) with uniform properties is key to improving the performance of gamma radiation detectors fabricated from them. Towards this goal, we discuss results obtained by computational models that provide a deeper understanding of crystal growth processes and how the growth of CZT can be improved. In particular, we discuss methods that may be implemented to lessen the deleterious interactions between the ampoule wall and the growing crystal via engineering a convex solidification interface. For vertical Bridgman growth, a novel, bell-curve furnace temperature profile is predicted to achieve macroscopically convex solid-liquid interface shapes during melt growth of CZT in a multiple-zone furnace. This approach represents a significant advance over traditional gradient-freeze profiles, which always yield concave interface shapes, and static heat transfer designs, such as pedestal design, that achieve convex interfaces over only a small portion of the growth run. Importantly, this strategy may be applied to any Bridgman configuration that utilizes multiple, controllable heating zones. Realizing a convex solidification interface via this adaptive bell-curve furnace profile is postulated to result in better crystallinity and higher yields than conventional CZT growth techniques.

Design of a targeted peptide nucleic acid prodrug to inhibit hepatic human microsomal triglyceride transfer protein expression in hepatocytes.

PubMed

Biessen, Erik A L; Sliedregt-Bol, Karen; 'T Hoen, Peter A Chr; Prince, Perry; Van der Bilt, Erica; Valentijn, A Rob P M; Meeuwenoord, Nico J; Princen, Hans; Bijsterbosch, Martin K; Van der Marel, Gijs A; Van Boom, Jacques H; Van Berkel, Theo J C

2002-01-01

In this study, we present the design and synthesis of an antisense peptide nucleic acid (asPNA) prodrug, which displays an improved biodistribution profile and an equally improved capacity to reduce the levels of target mRNA. The prodrug, K(GalNAc)(2)-asPNA, comprised of a 14-mer sequence complementary to the human microsomal triglyceride transfer protein (huMTP) gene, conjugated to a high-affinity tag for the hepatic asialoglycoprotein receptor (K(GalNAc)(2)). The prodrug was avidly bound and rapidly internalized by HepG2s. After iv injection into mice, K(GalNAc)(2)-asPNA accumulated in the parenchymal liver cells to a much greater extent than nonconjugated PNA (46% +/- 1% vs 3.1% +/- 0.5% of the injected dose, respectively). The prodrug was able to reduce MTP mRNA levels in HepG2 cells by 35-40% (P < 0.02) at 100 nM in an asialoglycoprotein receptor- and sequence-dependent fashion. In conclusion, hepatocyte-targeted PNA prodrugs combine a greatly improved tropism with an enhanced local intracellular availability and activity, making them attractive therapeutics to lower the expression level of hepatic target genes such as MTP.

Improvements in analysis techniques for segmented mirror arrays

NASA Astrophysics Data System (ADS)

Michels, Gregory J.; Genberg, Victor L.; Bisson, Gary R.

2016-08-01

The employment of actively controlled segmented mirror architectures has become increasingly common in the development of current astronomical telescopes. Optomechanical analysis of such hardware presents unique issues compared to that of monolithic mirror designs. The work presented here is a review of current capabilities and improvements in the methodology of the analysis of mechanically induced surface deformation of such systems. The recent improvements include capability to differentiate surface deformation at the array and segment level. This differentiation allowing surface deformation analysis at each individual segment level offers useful insight into the mechanical behavior of the segments that is unavailable by analysis solely at the parent array level. In addition, capability to characterize the full displacement vector deformation of collections of points allows analysis of mechanical disturbance predictions of assembly interfaces relative to other assembly interfaces. This capability, called racking analysis, allows engineers to develop designs for segment-to-segment phasing performance in assembly integration, 0g release, and thermal stability of operation. The performance predicted by racking has the advantage of being comparable to the measurements used in assembly of hardware. Approaches to all of the above issues are presented and demonstrated by example with SigFit, a commercially available tool integrating mechanical analysis with optical analysis.