International programs related to the transmutation of transuranics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newman, C.

1991-04-01

This report is an account of current programs outside the U.S. relating to the transmutation of transuranics. This work was performed under contract to EPRI. The investigation was based on literature surveys, personal discussions, and visits to European research establishments that are currently active in the area. Research in actinide (uranium plus transuranics) partitioning and transmutation (P-T) is actively promoted in Japan, where the largest program in research on P-T is currently underway; however, following years of relative inactivity, the concept is being revisited elsewhere. Additionally, a significant amount of research in reprocessing and advanced reactors has produced results withmore » interesting possibilities for P-T. Foreign research activities relevant to actinide burning is presented in two sections: foreign national programs, and international programs and working groups. In order to provide the reader with an ability to assess the motivators for or against development of P-T, background on political and institutional trends relating to nuclear waste management is also provided. 38 refs., 17 figs.« less

Seventeen-Coordinate Actinide Helium Complexes.

PubMed

Kaltsoyannis, Nikolas

2017-06-12

The geometries and electronic structures of molecular ions featuring He atoms complexed to actinide cations are explored computationally using density functional and coupled cluster theories. A new record coordination number is established, as AcHe 17 3+ , ThHe 17 4+ , and PaHe 17 4+ are all found to be true geometric minima, with the He atoms clearly located in the first shell around the actinide. Analysis of AcHe n 3+ (n=1-17) using the quantum theory of atoms in molecules (QTAIM) confirms these systems as having closed shell, charge-induced dipole bonding. Excellent correlations (R 2 >0.95) are found between QTAIM metrics (bond critical point electron densities and delocalization indices) and the average Ac-He distances, and also with the incremental He binding energies. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

40 CFR 63.7522 - Can I use emissions averaging to comply with this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... section. You may not include new boilers or process heaters in an emissions average. (b) For a group of... subcategory of units designed to burn gas 2 (other) fuels. (iv) You may not average across the units designed to burn liquid, units designed to burn solid fuel, and units designed to burn gas 2 (other...

Sub-barrier quasifission in heavy element formation reactions with deformed actinide target nuclei

NASA Astrophysics Data System (ADS)

Hinde, D. J.; Jeung, D. Y.; Prasad, E.; Wakhle, A.; Dasgupta, M.; Evers, M.; Luong, D. H.; du Rietz, R.; Simenel, C.; Simpson, E. C.; Williams, E.

2018-02-01

Background: The formation of superheavy elements (SHEs) by fusion of two massive nuclei is severely inhibited by the competing quasifission process. Low excitation energies favor SHE survival against fusion-fission competition. In "cold" fusion with spherical target nuclei near 208Pb, SHE yields are largest at beam energies significantly below the average capture barrier. In "hot" fusion with statically deformed actinide nuclei, this is not the case. Here the elongated deformation-aligned configurations in sub-barrier capture reactions inhibits fusion (formation of a compact compound nucleus), instead favoring rapid reseparation through quasifission. Purpose: To determine the probabilities of fast and slow quasifission in reactions with prolate statically deformed actinide nuclei, through measurement and quantitative analysis of the dependence of quasifission characteristics at beam energies spanning the average capture barrier energy. Methods: The Australian National University Heavy Ion Accelerator Facility and CUBE fission spectrometer have been used to measure fission and quasifission mass and angle distributions for reactions with projectiles from C to S, bombarding Th and U target nuclei. Results: Mass-asymmetric quasifission occurring on a fast time scale, associated with collisions with the tips of the prolate actinide nuclei, shows a rapid increase in probability with increasing projectile charge, the transition being centered around projectile atomic number ZP=14 . For mass-symmetric fission events, deviations of angular anisotropies from expectations for fusion fission, indicating a component of slower quasifission, suggest a similar transition, but centered around ZP˜8 . Conclusions: Collisions with the tips of statically deformed prolate actinide nuclei show evidence for two distinct quasifission processes of different time scales. Their probabilities both increase rapidly with the projectile charge. The probability of fusion can be severely suppressed by these two quasifission processes, since the sub-barrier heavy element yield is likely to be determined by the product of the probabilities of surviving each quasifission process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id

Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this softwaremore » 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.« less

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux

DOEpatents

Bowman, C.D.

1992-11-03

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux. High thermal neutron fluxes generated from the action of a high power proton accelerator on a spallation target allows the efficient burn-up of higher actinide nuclear waste by a two-step process. Additionally, rapid burn-up of fission product waste for nuclides having small thermal neutron cross sections, and the practicality of small material inventories while achieving significant throughput derive from employment of such high fluxes. Several nuclear technology problems are addressed including 1. nuclear energy production without a waste stream requiring storage on a geological timescale, 2. the burn-up of defense and commercial nuclear waste, and 3. the production of defense nuclear material. The apparatus includes an accelerator, a target for neutron production surrounded by a blanket region for transmutation, a turbine for electric power production, and a chemical processing facility. In all applications, the accelerator power may be generated internally from fission and the waste produced thereby is transmuted internally so that waste management might not be required beyond the human lifespan.

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux

DOEpatents

Bowman, Charles D.

1992-01-01

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux. High thermal neutron fluxes generated from the action of a high power proton accelerator on a spallation target allows the efficient burn-up of higher actinide nuclear waste by a two-step process. Additionally, rapid burn-up of fission product waste for nuclides having small thermal neutron cross sections, and the practicality of small material inventories while achieving significant throughput derive from employment of such high fluxes. Several nuclear technology problems are addressed including 1. nuclear energy production without a waste stream requiring storage on a geological timescale, 2. the burn-up of defense and commercial nuclear waste, and 3. the production of defense nuclear material. The apparatus includes an accelerator, a target for neutron production surrounded by a blanket region for transmutation, a turbine for electric power production, and a chemical processing facility. In all applications, the accelerator power may be generated internally from fission and the waste produced thereby is transmuted internally so that waste management might not be required beyond the human lifespan.

A ten-year experience with hemodialysis in burn patients at Los Angeles County + USC Medical Center.

PubMed

Soltani, Ali; Karsidag, Semra; Garner, Warren

2009-01-01

Acute renal failure (ARF) is a rare, but serious, complication after burn injury that is commonly thought to be fatal. Before the modern era, there were few survivors of burn injuries who required dialysis. We report our 10-year experience with ARF and dialysis at the Los Angeles County + USC burn unit. During the period of August 1994 to February 2004, 3356 patients were admitted. Furthermore, 1143 patients were admitted to the intensive care unit and 1125 had burns >10% TBSA. Thirty-three patients developed ARF necessitating dialysis, equaling 0.98% of all admitted patients, and 2.7% of patients with TBSA >10% burns, which is at the low end of published burn unit data. The average age of these patients requiring dialysis was 49 years, 91% were men, 24% were diabetic, and 39% were positive for substances of abuse at admission, and the average TBSA burned was 36%. This is compared with an average age of 31 years, 70% men, 7.3% diabetic, and 14.7% intoxicated in the general burned population at our burn unit. Furthermore, our overall mortality in the burn unit was 5% overall and 14% in patients with >10% TBSA burns during the study period. In patients requiring hemodialysis, the mortality rate was 69.7%. The average time to hemodialysis was 14 days in our series, and patients, on average, required 10.3 days of dialysis support. These mortality data are the lowest recorded for burned patients requiring dialysis and suggest that ARF is a survivable complication in some of these patients.

A Novel Fuel/Reactor Cycle to Implement the 300 Years Nuclear Waste Policy Approach - 12377

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carelli, M.D.; Franceschini, F.; Lahoda, E.J.

2012-07-01

A thorium-based fuel cycle system can effectively burn the currently accumulated commercial used nuclear fuel and move to a sustainable equilibrium where the actinide levels in the high level waste are low enough to yield a radiotoxicity after 300 years lower than that of the equivalent uranium ore. The second step of the Westinghouse approach to solving the waste 'problem' has been completed. The thorium fuel cycle has indeed the potential of burning the legacy TRU and achieve the waste objective proposed. Initial evaluations have been started for the third step, development and selection of appropriate reactors. Indications are thatmore » the probability of show-stoppers is rather remote. It is, therefore, believed that development of the thorium cycle and associated technologies will provide a permanent solution to the waste management. Westinghouse is open to the widest collaboration to make this a reality. (authors)« less

Epidemiology and financial implications of self-inflicted burns.

PubMed

George, S; Javed, M; Hemington-Gorse, S; Wilson-Jones, N

2016-02-01

The cost of the treatment of burns is high especially in self-inflicted burns with prolonged treatment. We performed a retrospective review of the self-inflicted burns at our regional burns centre to determine the costs incurred in their management and to identify factors which could reduce the financial burden in the future. The data was collected retrospectively of all the inpatient and outpatient self-inflicted burns presenting to our regional burns centre in the year 2011. Twenty one patients (out of a total of 870 patients) presented with self-inflicted burns to our centre in 2011. Five (23.8%) were major burns with an average of 53.2% Total Body Surface Area (TBSA) and 16 (76.2%) were minor burns with an average of 0.5% TBSA. 11 (52.4%) patients had flame burns including 4 self-immolation burns. The mortality rate was 4.8% (n=1). Five (23.8%) patients underwent surgical treatment. Seven (33.3%) patients were treated in intensive care and with average stay of 46.85 days. Critical care and theatre attendances made up most of the costs with average ICU stay per patient calculated at £313,131/day. The total cost of all 21 patients was £1,581,856. Burns are preventable injuries, early detection and intervention in patients with propensity to self-inflict burns can possibly reduce the costs of treatment in the future. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Preparation and X-Ray diffraction studies of curium hydrides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibson, J.K.; Maire, R.G.

Curium hydrides were prepared by reaction of curium-248 metal with hydrogen and characterized by X-ray powder diffraction. Several of the syntheses resulted in a hexagonal compound with average lattice parameters of a/sub 0/ = 0.3769(8) nm and c/sub 0/ = 0.6732(12) nm. These products are considere to be CmH/sub 3//sup -//sub 8/ by analogy with the behavior of lanthanide-hydrogen and lighter actinide-hydrogen systems. Face-centered cubic products with an average lattice parameter of a/sub 0/ = 0.5322(4) nm were obtained from other curium hydride preparations. This parameter is slightly smaller than that reported previously for cubic curium dihydride, CmH /SUB 2-x/more » (B.M. Bansal and D. Damien. Inorg. Nucl. Chem. Lett. 6 603, 1970). The present results established a continuation of typical heavy trivalent lanthanidelike behavior of the transuranium actinide-hydrogen systems through curium.« less

Preparation and X-ray diffraction studies of curium hydrides

NASA Astrophysics Data System (ADS)

Gibson, J. K.; Haire, R. G.

1985-10-01

Curium hydrides were prepared by reaction of curium-248 metal with hydrogen and characterized by X-ray powder diffraction. Several of the syntheses resulted in a hexagonal compound with average lattice parameters of a0 = 0.3769(8) nm and c0 = 0.6732(12) nm. These products are considered to be CmH 3-δ by analogy with the behavior of lanthanide-hydrogen and lighter actinide-hydrogen systems. Face-centered cubic products with an average lattice parameter of a0 = 0.5322(4) nm were obtained from other curium hydride preparations. This parameter is slightly smaller than that reported previously for cubic curium dihydride, CmH 2+ x (B. M. Bansal and D. Damien, Inorg. Nucl. Chem. Lett., 6, 603, 1970). The present results established a continuation of typical heavy trivalent lanthanide-like behavior of the transuranium actinide-hydrogen systems through curium.

LIFE Materials: Overview of Fuels and Structural Materials Issues Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, J

2008-09-08

The National Ignition Facility (NIF) project, a laser-based Inertial Confinement Fusion (ICF) experiment designed to achieve thermonuclear fusion ignition and burn in the laboratory, is under construction at the Lawrence Livermore National Laboratory (LLNL) and will be completed in April of 2009. Experiments designed to accomplish the NIF's goal will commence in late FY2010 utilizing laser energies of 1 to 1.3 MJ. Fusion yields of the order of 10 to 20 MJ are expected soon thereafter. Laser initiated fusion-fission (LIFE) engines have now been designed to produce nuclear power from natural or depleted uranium without isotopic enrichment, and from spentmore » nuclear fuel from light water reactors without chemical separation into weapons-attractive actinide streams. A point-source of high-energy neutrons produced by laser-generated, thermonuclear fusion within a target is used to achieve ultra-deep burn-up of the fertile or fissile fuel in a sub-critical fission blanket. Fertile fuels including depleted uranium (DU), natural uranium (NatU), spent nuclear fuel (SNF), and thorium (Th) can be used. Fissile fuels such as low-enrichment uranium (LEU), excess weapons plutonium (WG-Pu), and excess highly-enriched uranium (HEU) may be used as well. Based upon preliminary analyses, it is believed that LIFE could help meet worldwide electricity needs in a safe and sustainable manner, while drastically shrinking the nation's and world's stockpile of spent nuclear fuel and excess weapons materials. LIFE takes advantage of the significant advances in laser-based inertial confinement fusion that are taking place at the NIF at LLNL where it is expected that thermonuclear ignition will be achieved in the 2010-2011 timeframe. Starting from as little as 300 to 500 MW of fusion power, a single LIFE engine will be able to generate 2000 to 3000 MWt in steady state for periods of years to decades, depending on the nuclear fuel and engine configuration. Because the fission blanket in a fusion-fission hybrid system is subcritical, a LIFE engine can burn any fertile or fissile nuclear material, including un-enriched natural or depleted U and SNF, and can extract a very high percentage of the energy content of its fuel resulting in greatly enhanced energy generation per metric ton of nuclear fuel, as well as nuclear waste forms with vastly reduced concentrations of long-lived actinides. LIFE engines could thus provide the ability to generate vast amounts of electricity while greatly reducing the actinide content of any existing or future nuclear waste and extending the availability of low cost nuclear fuels for several thousand years. LIFE also provides an attractive pathway for burning excess weapons Pu to over 99% FIMA (fission of initial metal atoms) without the need for fabricating or reprocessing mixed oxide fuels (MOX). Because of all of these advantages, LIFE engines offer a pathway toward sustainable and safe nuclear power that significantly mitigates nuclear proliferation concerns and minimizes nuclear waste. An important aspect of a LIFE engine is the fact that there is no need to extract the fission fuel from the fission blanket before it is burned to the desired final level. Except for fuel inspection and maintenance process times, the nuclear fuel is always within the core of the reactor and no weapons-attractive materials are available outside at any point in time. However, an important consideration when discussing proliferation concerns associated with any nuclear fuel cycle is the ease with which reactor fuel can be converted to weapons usable materials, not just when it is extracted as waste, but at any point in the fuel cycle. Although the nuclear fuel remains in the core of the engine until ultra deep actinide burn up is achieved, soon after start up of the engine, once the system breeds up to full power, several tons of fissile material is present in the fission blanket. However, this fissile material is widely dispersed in millions of fuel pebbles, which can be tagged as individual accountable items, and thus made difficult to divert in large quantities. Several topical reports are being prepared on the materials and processes required for the LIFE engine. Specific materials of interest include: (1) Baseline TRISO Fuel (TRISO); (2) Inert Matrix Fuel (IMF) & Other Alternative Solid Fuels; (3) Beryllium (Be) & Molten Lead Blankets (Pb/PbLi); (4) Molten Salt Coolants (FLIBE/FLiNaBe/FLiNaK); (5) Molten Salt Fuels (UF4 + FLIBE/FLiNaBe); (6) Cladding Materials for Fuel & Beryllium; (7) ODS FM Steel (ODS); (8) Solid First Wall (SFW); and (9) Solid-State Tritium Storage (Hydrides).« less

Fission yield covariances for JEFF: A Bayesian Monte Carlo method

NASA Astrophysics Data System (ADS)

Leray, Olivier; Rochman, Dimitri; Fleming, Michael; Sublet, Jean-Christophe; Koning, Arjan; Vasiliev, Alexander; Ferroukhi, Hakim

2017-09-01

The JEFF library does not contain fission yield covariances, but simply best estimates and uncertainties. This situation is not unique as all libraries are facing this deficiency, firstly due to the lack of a defined format. An alternative approach is to provide a set of random fission yields, themselves reflecting covariance information. In this work, these random files are obtained combining the information from the JEFF library (fission yields and uncertainties) and the theoretical knowledge from the GEF code. Examples of this method are presented for the main actinides together with their impacts on simple burn-up and decay heat calculations.

Characterisation of the impact of open biomass burning on urban air quality in Brisbane, Australia.

PubMed

He, Congrong; Miljevic, Branka; Crilley, Leigh R; Surawski, Nicholas C; Bartsch, Jennifer; Salimi, Farhad; Uhde, Erik; Schnelle-Kreis, Jürgen; Orasche, Jürgen; Ristovski, Zoran; Ayoko, Godwin A; Zimmermann, Ralf; Morawska, Lidia

2016-05-01

Open biomass burning from wildfires and the prescribed burning of forests and farmland is a frequent occurrence in South-East Queensland (SEQ), Australia. This work reports on data collected from 10 to 30 September 2011, which covers the days before (10-14 September), during (15-20 September) and after (21-30 September) a period of biomass burning in SEQ. The aim of this project was to comprehensively quantify the impact of the biomass burning on air quality in Brisbane, the capital city of Queensland. A multi-parameter field measurement campaign was conducted and ambient air quality data from 13 monitoring stations across SEQ were analysed. During the burning period, the average concentrations of all measured pollutants increased (from 20% to 430%) compared to the non-burning period (both before and after burning), except for total xylenes. The average concentration of O3, NO2, SO2, benzene, formaldehyde, PM10, PM2.5 and visibility-reducing particles reached their highest levels for the year, which were up to 10 times higher than annual average levels, while PM10, PM2.5 and SO2 concentrations exceeded the WHO 24-hour guidelines and O3 concentration exceeded the WHO maximum 8-hour average threshold during the burning period. Overall spatial variations showed that all measured pollutants, with the exception of O3, were closer to spatial homogeneity during the burning compared to the non-burning period. In addition to the above, elevated concentrations of three biomass burning organic tracers (levoglucosan, mannosan and galactosan), together with the amount of non-refractory organic particles (PM1) and the average value of f60 (attributed to levoglucosan), reinforce that elevated pollutant concentration levels were due to emissions from open biomass burning events, 70% of which were prescribed burning events. This study, which is the first and most comprehensive of its kind in Australia, provides quantitative evidence of the significant impact of open biomass burning events, especially prescribed burning, on urban air quality. The current results provide a solid platform for more detailed health and modelling investigations in the future. Copyright © 2016 Elsevier Ltd. All rights reserved.

Epidemiology of burns undergoing hospitalization to the National Burns Unit in the Sultanate of Oman: a 25-year review.

PubMed

Al-Shaqsi, Sultan; Al-Kashmiri, Ammar; Al-Bulushi, Taimoor

2013-12-01

The aim of this study was to describe the epidemiology of burns admitted to the National Burns Unit (NBU) in the Sultanate of Oman between 1987 and 2011. This is a retrospective review of burn patients admitted to Oman's National Burns Unit (NBU) between 1987 and 2011. The data extracted from the national burn registry. The study describes the admission rate by gender and age groups, occupation, causes of burns, time-to-admission, length of stay and in-hospital mortality of burns between 1987 and 2011. During a 25-year from 1987 to 2011, there were 3531 burn patients admitted to the National Burns Unit in Oman. The average admission rate to NBU is 7.02 per 100,000 persons per year. On average, males were more likely to be admitted to the NBU than females during the study period (P value < 0.04). Patients aged 1-10 years old constituted 46.6% of caseload during the study period. Flames and scalds caused 88.4% of burns. About half of all patients admitted to the NBU have burns to more than 11% of total body surface area (TBSA). The average stay in hospital was estimated to be 15.3 days per patient. The average in-hospital mortality rate was estimated to be 8.2% per year (range 1.9-22%). Burns are significant public health issue in the Sultanate of Oman. Children are disproportionately over-represented in this study. Prevention programmes are urgently needed to address this "silent and costly epidemic." Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Use of a copolymer dressing on superficial and partial-thickness burns in a paediatric population.

PubMed

Everett, M; Massand, S; Davis, W; Burkey, B; Glat, P M

2015-07-01

Despite extensive research into the treatment of partial-thickness burns, to date there has not been the emergence of a preeminent modality. This pilot study, the first such study to be performed in a burn unit in the US, was designed to evaluate the efficacy and outcomes of the application of copolymer dressing (Suprathel; PolyMedics Innovations Corporation, Stuttgart, Germany) for both superficial and deeper partial-thickness burns. The copolymer dressing was used as a primary wound dressing to treat superficial and deep partial-thickness burns (average 5% total body surface area) in paediatric patients. Burns were debrided within 24 hours, at bedside, in the burn unit or in the operating room. The copolymer dressing was then applied directly to the wound and covered with a non-adherent second layer and an absorptive outer dressing. After discharge, patients were seen every 5-7 days until healed. Parameters evaluated included average hospital length of stay, average number of intravenous doses of narcotics administered, pain score at first follow-up visit, average time to complete re epithelialisation, incidence of burn wound infection, and patient/parent satisfaction on a 4-point scale. We also evaluated our experience with the dressing. Data were evaluated retrospectively under an Investigational Review Board approved protocol. Of the 17 patients assessed the average hospital length of stay was 1.4 days during which the average number of intravenous narcotic doses administered before copolymer dressing application was 1.5 and after was 0.1 doses. At the first follow-up visit, average pain score was 1.2 on a 10-point scale and the average time to re epithelialisation was 9.5 days. There was no incidence of burn wound infection. Patient/parent satisfaction was average of 3.66 on a 4-point scale. The staff had found that the self-adherence and elasticity of the dressing made it easy to apply and stay adherent, especially in areas of difficult contour. There were no readmissions for further debridement or skin grafting. Our experience shows that patients may be discharged shortly after the application of the copolymer dressing, with manageable pain scores and ease of use as determined by the caretakers high satisfaction. This new, fully synthetic copolymer dressing is easy to apply, does not require any additional antimicrobial coverage and may be used to successfully manage deeper partial-thickness burns, donor sites or burns in areas of contour, where many other dressings might not be considered or be appropriate. None declared.

Actinide oxide photodiode and nuclear battery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sykora, Milan; Usov, Igor

Photodiodes and nuclear batteries may utilize actinide oxides, such a uranium oxide. An actinide oxide photodiode may include a first actinide oxide layer and a second actinide oxide layer deposited on the first actinide oxide layer. The first actinide oxide layer may be n-doped or p-doped. The second actinide oxide layer may be p-doped when the first actinide oxide layer is n-doped, and the second actinide oxide layer may be n-doped when the first actinide oxide layer is p-doped. The first actinide oxide layer and the second actinide oxide layer may form a p/n junction therebetween. Photodiodes including actinide oxidesmore » are better light absorbers, can be used in thinner films, and are more thermally stable than silicon, germanium, and gallium arsenide.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mac Donald, Philip Elsworth; Buongiorno, Jacopo; Davis, Cliff Bybee

The purpose of this collaborative Idaho National Engineering and Environmental Laboratory (INEEL) and Massachusetts Institute of Technology (MIT) Laboratory Directed Research and Development (LDRD) project is to investigate the suitability of lead or lead-bismuth cooled fast reactors for producing low-cost electricity as well as for actinide burning. The goal is to identify and analyze the key technical issues in core neutronics, materials, thermal-hydraulics, fuels, and economics associated with the development of this reactor concept. Work has been accomplished in four major areas of research: core neutronic design, plant engineering, material compatibility studies, and coolant activation. The publications derived from workmore » on this project (since project inception) are listed in Appendix A.« less

Analysis of Advanced Fuel Assemblies and Core Designs for the Current and Next Generations of LWRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ragusa, Jean; Vierow, Karen

2011-09-01

The objective of the project is to design and analyze advanced fuel assemblies for use in current and future light water reactors and to assess their ability to reduce the inventory of transuranic elements, while preserving operational safety. The reprocessing of spent nuclear fuel can delay or avoid the need for a second geological repository in the US. Current light water reactor fuel assembly designs under investigation could reduce the plutonium inventory of reprocessed fuel. Nevertheless, these designs are not effective in stabilizing or reducing the inventory of minor actinides. In the course of this project, we developed and analyzedmore » advanced fuel assembly designs with improved thermal transmutation capability regarding transuranic elements and especially minor actinides. These designs will be intended for use in thermal spectrum (e.g., current and future fleet of light water reactors in the US). We investigated various fuel types, namely high burn-up advanced mixed oxides and inert matrix fuels, in various geometrical designs that are compliant with the core internals of current and future light water reactors. Neutronic/thermal hydraulic effects were included. Transmutation efficiency and safety parameters were used to rank and down-select the various designs.« less

A physical and economic model of the nuclear fuel cycle

NASA Astrophysics Data System (ADS)

Schneider, Erich Alfred

A model of the nuclear fuel cycle that is suitable for use in strategic planning and economic forecasting is presented. The model, to be made available as a stand-alone software package, requires only a small set of fuel cycle and reactor specific input parameters. Critical design criteria include ease of use by nonspecialists, suppression of errors to within a range dictated by unit cost uncertainties, and limitation of runtime to under one minute on a typical desktop computer. Collision probability approximations to the neutron transport equation that lead to a computationally efficient decoupling of the spatial and energy variables are presented and implemented. The energy dependent flux, governed by coupled integral equations, is treated by multigroup or continuous thermalization methods. The model's output includes a comprehensive nuclear materials flowchart that begins with ore requirements, calculates the buildup of 24 actinides as well as fission products, and concludes with spent fuel or reprocessed material composition. The costs, direct and hidden, of the fuel cycle under study are also computed. In addition to direct disposal and plutonium recycling strategies in current use, the model addresses hypothetical cycles. These include cycles chosen for minor actinide burning and for their low weapons-usable content.

Transuranic Waste Burning Potential of Thorium Fuel in a Fast Reactor - 12423

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wenner, Michael; Franceschini, Fausto; Ferroni, Paolo

Westinghouse Electric Company (referred to as 'Westinghouse' in the rest of this paper) is proposing a 'back-to-front' approach to overcome the stalemate on nuclear waste management in the US. In this approach, requirements to further the societal acceptance of nuclear waste are such that the ultimate health hazard resulting from the waste package is 'as low as reasonably achievable'. Societal acceptability of nuclear waste can be enhanced by reducing the long-term radiotoxicity of the waste, which is currently driven primarily by the protracted radiotoxicity of the transuranic (TRU) isotopes. Therefore, a transition to a more benign radioactive waste can bemore » accomplished by a fuel cycle capable of consuming the stockpile of TRU 'legacy' waste contained in the LWR Used Nuclear Fuel (UNF) while generating waste which is significantly less radio-toxic than that produced by the current open U-based fuel cycle (once through and variations thereof). Investigation of a fast reactor (FR) operating on a thorium-based fuel cycle, as opposed to the traditional uranium-based is performed. Due to a combination between its neutronic properties and its low position in the actinide chain, thorium not only burns the legacy TRU waste, but it does so with a minimal production of 'new' TRUs. The effectiveness of a thorium-based fast reactor to burn legacy TRU and its flexibility to incorporate various fuels and recycle schemes according to the evolving needs of the transmutation scenario have been investigated. Specifically, the potential for a high TRU burning rate, high U-233 generation rate if so desired and low concurrent production of TRU have been used as metrics for the examined cycles. Core physics simulations of a fast reactor core running on thorium-based fuels and burning an external TRU feed supply have been carried out over multiple cycles of irradiation, separation and reprocessing. The TRU burning capability as well as the core isotopic content have been characterized. Results will be presented showing the potential for thorium to reach a high TRU transmutation rate over a wide variety of fuel types (oxide, metal, nitride and carbide) and transmutation schemes (recycle or partition of in-bred U-233). In addition, a sustainable scheme has been devised to burn the TRU accumulated in the core inventory once the legacy TRU supply has been exhausted, thereby achieving long-term virtually TRU-free. A comprehensive 'back-to-front' approach to the fuel cycle has recently been proposed by Westinghouse which emphasizes achieving 'acceptable', low-radiotoxicity, high-level waste, with the intent not only to satisfy all technical constraints but also to improve public acceptance of nuclear energy. Following this approach, the thorium fuel cycle, due to its low radiotoxicity and high potential for TRU transmutation has been selected as a promising solution. Additional studies not shown here have shown significant reduction of decay heat. The TRU burning potential of the Th-based fuel cycle has been illustrated with a variety of fuel types, using the Toshiba ARR to perform the analysis, including scenarios with continued LWR operation of either uranium fueled or thorium fueled LWRs. These scenarios will afford overall reduction in actinide radiotoxicity, however when the TRU supply is exhausted, a continued U- 235 LWR operation must be assumed to provide TRU makeup feed. This scenario will never reach the characteristically low TRU content of a closed thorium fuel cycle with its associated potential benefits on waste radiotoxicity, as exemplified by the transition scenario studied. At present, the cases studied indicate ThC as a potential fuel for maximizing TRU burning, while ThN with nitrogen enriched to 95% N-15 shows the highest breeding potential. As a result, a transition scenario with ThN was developed to show that a sustainable, closed Th-cycle can be achieved starting from burning the legacy TRU stock and completing the transmutation of the residual TRU remaining in the core inventory after the legacy TRU external supply has been exhausted. The radiotoxicity of the actinide waste during the various phases has been characterized, showing the beneficial effect of the decreasing content of TRU in the recycled fuel as the transition to a closed Th-based fuel cycle is undertaken. Due to the back-to-front nature of the proposed methodology, detailed designs are not the first step taken when assessing a fuel cycle scenario potential. As a result, design refinement is still required and should be expected in future studies. Moreover, significant safety assessment, including determination of associated reactivity coefficients, fuel and reprocessing feasibility studies and economic assessments will still be needed for a more comprehensive and meaningful comparison against other potential solutions. With the above considerations in mind, the potential advantages of thorium fuelled reactors on HLW management optimization lead us to believe that thorium fuelled reactor systems can play a significant role in the future and deserve further consideration. (authors)« less

Use of a home vacuum-assisted closure device in the burn population is both cost-effective and efficacious.

PubMed

Mushin, Oren P; Bogue, Jarrod T; Esquenazi, Mica D; Toscano, Nicole; Bell, Derek E

2017-05-01

The vacuum assisted closure device (VAC) improves wound-healing when utilized as a bolster to secure split thickness skin grafts (STSG). Patients typically remain hospitalized for VAC therapy; however, home VACs (hVAC) are now available. Limited studies examine burns treated with hVAC as a STSG bolster. A retrospective study of records from an ABA verified regional burn center was conducted over 23 months. Patients included STSGs for burn. Data points included demographics, burn mechanism and location, graft characteristics, hospital length of stay (LOS), and time to heal. Fifty patients were included, with average age of 39 years (range <1-83years). Average burn TBSA was 1.27±1.42 (range 0.05-8.18). Grafted area average was 102.9±128.1cm 2 . The most commonly treated areas were the leg/foot, thigh, and torso (53%, 16%, and 16%, respectively). Average LOS was 1.1±1.2 days. Mean graft-take was 99.2±2.8% with one patient undergoing repeat STSG. Average post-operative time to heal was 16±6 days. A 5-day inpatient stay with a VAC costs an average of $34,635, compared to $9134 for an hVAC over the same period. The hVAC is a cost-effective STSG bolster in the burn population for appropriate candidates. Excellent graft-take and low morbidity rates imply that this is an efficacious alternative for STSG bolster. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Prescribed burning weather in Minnesota.

Treesearch

Rodney W. Sando

1969-01-01

Describes the weather patterns in northern Minnesota as related to prescribed burning. The prevailing wind direction, average wind speed, most persistent wind direction, and average Buildup Index are considered in making recommendations.

Extraction Selectivity of a Quaternary Alkylammonium Salt for Trivalent Actinides over Trivalent Lanthanides: Does Extractant Aggregation Play a Role?

DOE PAGES

Knight, Andrew W.; Chiarizia, Renato; Soderholm, L.

2017-05-10

In this paper, the extraction behavior of a quaternary alkylammonium salt extractant was investigated for its selectivity for trivalent actinides over trivalent lanthanides in nitrate and thiocyanate media. The selectivity was evaluated by solvent extraction experiments through radiochemical analysis of 241Am and 152/154Eu. Solvent extraction distribution and slope-analysis experiments were performed with americium(III) and europium(III) with respect to the ligand (nitrate and thiocyanate), extractant, and metal (europium only) concentrations. Further evaluation of the equilibrium expression that governs the extraction process indicated the appropriate use of the saturation method for estimation of the aggregation state of quaternary ammonium extractants in themore » organic phase. From the saturation method, we observed an average aggregation number of 5.4 ± 0.8 and 8.5 ± 0.9 monomers/aggregate for nitrate and thiocyanate, respectively. Through a side-by-side comparison of the nitrate and thiocyanate forms, we discuss the potential role of the aggregation in the increased selectivity for trivalent actinides over trivalent lanthanides in thiocyanate media.« less

Extraction Selectivity of a Quaternary Alkylammonium Salt for Trivalent Actinides over Trivalent Lanthanides: Does Extractant Aggregation Play a Role?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knight, Andrew W.; Chiarizia, Renato; Soderholm, L.

In this paper, the extraction behavior of a quaternary alkylammonium salt extractant was investigated for its selectivity for trivalent actinides over trivalent lanthanides in nitrate and thiocyanate media. The selectivity was evaluated by solvent extraction experiments through radiochemical analysis of 241Am and 152/154Eu. Solvent extraction distribution and slope-analysis experiments were performed with americium(III) and europium(III) with respect to the ligand (nitrate and thiocyanate), extractant, and metal (europium only) concentrations. Further evaluation of the equilibrium expression that governs the extraction process indicated the appropriate use of the saturation method for estimation of the aggregation state of quaternary ammonium extractants in themore » organic phase. From the saturation method, we observed an average aggregation number of 5.4 ± 0.8 and 8.5 ± 0.9 monomers/aggregate for nitrate and thiocyanate, respectively. Through a side-by-side comparison of the nitrate and thiocyanate forms, we discuss the potential role of the aggregation in the increased selectivity for trivalent actinides over trivalent lanthanides in thiocyanate media.« less

A population-based study of the epidemiology of acute adult burns in Ecuador from 2005 to 2014.

PubMed

Ortiz-Prado, Esteban; Armijos, Luciana; Iturralde, Ana Lucia

2015-05-01

To describe the demographic, risk factor, occupational, and morbidity and mortality characteristics of burns in adults in Ecuador using national data. These data are from the only specialized public hospital in Ecuador that has a 12-bed burn unit. The National Institute of Statistics and Census provided data from the burn unit of the Hospital Eugenio Espejo, in Quito. Three different datasets pertaining to burn deaths, burn unit inpatient admissions, and hospital discharge were analyzed. Patients who died or were discharged before entering the burn unit were not included in this analysis. During the 10-year period, 1106 patients were admitted to the burn unit, men represent 69.37% with 768 cases and women represent 30.62% with 337 patients; the number of patients per year was on average 123 cases; the average age was 33-34 years old, with a range between 16 and 96 years old. Heat (thermal) burns represent 65.78% followed by electrical with 30.53%, friction burns with 2.06%, and chemical burns with 1.62%. Domestic methane gas was the most frequent agent causing thermal burns and the most affected occupational groups are construction workers and people who stay at home. The overall mortality is 10.2% and the average length of stay was 23 days. Thermal burns are more frequent than any other cause of burns. Electrical burns are more frequent in Ecuador than anywhere else according to our research, meaning that control and prevention of workplace safety, urban planning, and home safety are scarce. The most affected groups are those dedicated to labor work. Finally, mortality in hospitalized patient is higher when compared with developed countries. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Feasibility of space disposal of radioactive nuclear waste. 2: Technical summary

NASA Technical Reports Server (NTRS)

1974-01-01

The feasibility of transporting radioactive waste produced in the process of generating electricity in nuclear powerplants into space for ultimate disposal was investigated at the request of the AEC as a NASA in-house effort. The investigation is part of a broad AEC study of methods for long-term storage or disposal of radioactive waste. The results of the study indicate that transporting specific radioactive wastes, particularly the actinides with very long half-lives, into space using the space shuttle/tug as the launch system, appears feasible from the engineering and safety viewpoints. The space transportation costs for ejecting the actinides out of the solar system would represent less than a 5-percent increase in the average consumer's electric bill.

The use of botulinum toxin in the management of burns itching: preliminary results.

PubMed

Akhtar, N; Brooks, P

2012-12-01

Itching is a common and well recognised problem following burns. As the underlying pathways involved in burns itch have been identified, different pharmacological agents have been introduced to improve the effectiveness of management regimes. We present preliminary data from an on-going study in the use of botulinum toxin as a novel agent in the treatment of this problem. Patients with recalcitrant itching secondary to burns treated with Botox(©) were identified. Data pertaining to burn size, depth and management were recorded. The delay in the onset of the itch, its severity and the speed and duration of any improvement in symptoms were also noted. 10 patients were identified. 1 patient was excluded. Average follow-up was 11.3 months. All patients had deep partial thickness to full thickness burns. Eight patients underwent grafting. The average burn was 24% TBSA. 87.5% of patients rated their burns itch as being severe (>7 on the pain scale). Following the administration of Botox(©) this fell to 0 out of 10 at 4 weeks. The average duration of the symptom free period was nine months (range 3-18 months). Botox(©) can successfully be used to treat burns itch that are resistant to conventional therapies. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

PRELIMINARY DATA CALL REPORT ADVANCED BURNER REACTOR START UP FUEL FABRICATION FACILITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. T. Khericha

2007-04-01

The purpose of this report is to provide data for preparation of a NEPA Environmental Impact Statement in support the U. S. Department of Energy (DOE) Global Nuclear Energy Partnership (GNEP). One of the GNEP objectives is to reduce the inventory of long lived actinide from the light water reactor (LWR) spent fuel. The LWR spent fuel contains Plutonium (Pu) -239 and other transuranics (TRU) such as Americium-241. One of the options is to transmute or burn these actinides in fast neutron spectra as well as generate the electricity. A sodium-cooled Advanced Recycling Reactor (ARR) concept has been proposed tomore » achieve this goal. However, fuel with relatively high TRU content has not been used in the fast reactor. To demonstrate the utilization of TRU fuel in a fast reactor, an Advanced Burner Reactor (ABR) prototype of ARR is proposed, which would necessarily be started up using weapons grade (WG) Pu fuel. The WG Pu is distinguished by relatively highest proportions of Pu-239 and lesser amount of other actinides. The WG Pu will be used as the startup fuel along with TRU fuel in lead test assemblies. Because such fuel is not currently being produced in the US, a new facility (or new capability in an existing facility) is being considered for fabrication of WG Pu fuel for the ABR. This report is provided in response to ‘Data Call’ for the construction of startup fuel fabrication facility. It is anticipated that the facility will provide the startup fuel for 10-15 years and will take to 3 to 5 years to construct.« less

A Blueprint for GNEP Advanced Burner Reactor Startup Fuel Fabrication Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. Khericha

2010-12-01

The purpose of this article is to identify the requirements and issues associated with design of GNEP Advanced Burner Reactor Fuel Facility. The report was prepared in support of providing data for preparation of a NEPA Environmental Impact Statement in support the U. S. Department of Energy (DOE) Global Nuclear Energy Partnership (GNEP). One of the GNEP objectives was to reduce the inventory of long lived actinide from the light water reactor (LWR) spent fuel. The LWR spent fuel contains Plutonium (Pu) -239 and other transuranics (TRU) such as Americium-241. One of the options is to transmute or burn thesemore » actinides in fast neutron spectra as well as generate the electricity. A sodium-cooled Advanced Recycling Reactor (ARR) concept was proposed to achieve this goal. However, fuel with relatively high TRU content has not been used in the fast reactor. To demonstrate the utilization of TRU fuel in a fast reactor, an Advanced Burner Reactor (ABR) prototype of ARR was proposed, which would necessarily be started up using weapons grade (WG) Pu fuel. The WG Pu is distinguished by relatively highest proportions of Pu-239 and lesser amount of other actinides. The WG Pu was assumed to be used as the startup fuel along with TRU fuel in lead test assemblies. Because such fuel is not currently being produced in the US, a new facility (or new capability in an existing facility) was being considered for fabrication of WG Pu fuel for the ABR. It was estimated that the facility will provide the startup fuel for 10-15 years and would take 3 to 5 years to construct.« less

Dissolution behavior of MgO based inert matrix fuel for the transmutation of minor actinides

NASA Astrophysics Data System (ADS)

Mühr-Ebert, E. L.; Lichte, E.; Bukaemskiy, A.; Finkeldei, S.; Klinkenberg, M.; Brandt, F.; Bosbach, D.; Modolo, G.

2018-07-01

This study explores the dissolution properties of magnesia-based inert matrix nuclear fuel (IMF) containing transuranium elements (TRU). Pure MgO pellets as well as MgO pellets containing CeO2, as surrogate for TRU oxides, and are considered as model systems for genuine magnesia based inert matrix fuel were fabricated. The aim of this study is to identify conditions at which the matrix material can be selectively dissolved during the head-end reprocessing step, allowing a separation of MgO from the actinides, whereas the actinides remain undissolved. The dissolution behavior was studied in macroscopic batch experiments as a function of nitric acid concentration, dissolution medium volume, temperature, stirring velocity, and pellet density (85, 90, 96, and 99%TD). To mimic pellets with various burn-ups the density of the here fabricated pellets was varied. MgO is soluble even under mild conditions (RT, 2.5 mol/L HNO3). The dissolution rates of MgO at different acid concentrations are rather similar, whereas the dissolution rate is strongly dependent on the temperature. Via a microscopic approach, a model was developed to describe the evolution of the pellet surface area during dissolution and determine a surface normalized dissolution rate. Moreover, dissolution rates of the inert matrix fuel containing CeO2 were determined as a function of the acid concentration and temperature. During the dissolution of MgO/CeO2 pellets the MgO dissolves completely, while CeO2 (>99%) remains undissolved. This study intends to provide a profound understanding of the chemical performance of magnesia based IMF containing fissile material. The feasibility of the dissolution of magnesia based IMF with nitric acid is discussed.

How important is biomass burning in Canada to mercury contamination?

NASA Astrophysics Data System (ADS)

Fraser, Annemarie; Dastoor, Ashu; Ryjkov, Andrei

2018-05-01

Wildfire frequency has increased in past four decades in Canada and is expected to increase in future as a result of climate change (Wotton et al., 2010). Mercury (Hg) emissions from biomass burning are known to be significant; however, the impact of biomass burning on air concentration and deposition fluxes in Canada has not been previously quantified. We use estimates of burned biomass from FINN (Fire INventory from NCAR) and vegetation-specific emission factors (EFs) of mercury to investigate the spatiotemporal variability of Hg emissions in Canada. We use Environment and Climate Change Canada's GEM-MACH-Hg (Global Environmental Multi-scale, Modelling Air quality and Chemistry model, mercury version) to quantify the impact of biomass burning in Canada on spatiotemporal variability of air concentrations and deposition fluxes of mercury in Canada. We use North American gaseous elemental mercury (GEM) observations (2010-2015), GEM-MACH-Hg, and an inversion technique to optimize the EFs for GEM for five vegetation types represented in North American fires to constrain the biomass burning impacts of mercury. The inversion results suggest that EFs representing more vegetation types - specifically peatland - are required. This is currently limited by the sparseness of measurements of Hg from biomass burning plumes. More measurements of Hg concentration in the air, specifically downwind of fires, would improve the inversions. We use three biomass burning Hg emissions scenarios in Canada to conduct three sets of model simulations for 2010-2015: two scenarios where Hg is emitted only as GEM using literature or optimized EFs and a third scenario where Hg is emitted as GEM using literature EFs and particle bound mercury (PBM) emitted using the average GEM/PBM ratio from lab measurements. The three biomass burning emission scenarios represent a range of possible values for the impacts of Hg emissions from biomass burning in Canada on Hg concentration and deposition. We find total biomass burning Hg emissions to be highly variable from year to year and estimate average 2010-2015 total atmospheric biomass burning emissions of Hg in Canada to be between 6 and 14 t during the biomass burning season (i.e. from May to September), which is 3-7 times the mercury emission from anthropogenic sources in Canada for this period. On average, 65 % of the emissions occur in the provinces west of Ontario. We find that while emissions from biomass burning have a small impact on surface air concentrations of GEM averaged over individual provinces/territories, the impact at individual sites can be as high as 95 % during burning events. We estimate average annual mercury deposition from biomass burning in Canada to be between 0.3 and 2.8 t, compared to 0.14 t of mercury deposition from anthropogenic sources during the biomass burning season in Canada. Compared to the biomass burning emissions, the relative impact of fires on mercury deposition is shifted eastward, with on average 54 % percent of the deposition occurring in provinces west of Ontario. While the relative contribution of Canadian biomass burning to the total mercury deposition over each province/territory is no more than 9 % between 2010 and 2015, the local contribution in some locations (including areas downwind of biomass burning) can be as high as 80 % (e.g. northwest of Great Slave Lake in 2014) from May to September. We find that northern Alberta and Saskatchewan, central British Columbia, and the area around Great Slave Lake in the Northwest Territories are at greater risk of mercury contamination from biomass burning. GEM is considered to be the dominant mercury species emitted from biomass burning; however, there remains an uncertainty in the speciation of mercury released from biomass burning. We find that the impact of biomass burning emissions on mercury deposition is significantly affected by the uncertainty in speciation of emitted mercury because PBM is more readily deposited closer to the emission sources than GEM; an addition of ˜ 18 % percent of mercury emission from biomass burning in the form of PBM in the model increases the 6-year average deposition by ˜ 4 times.

The epidemiology of pediatric burns undergoing intensive care in Burn Centre Brno, Czech Republic, 1997-2009.

PubMed

Lipový, B; Brychta, P; Gregorová, N; Jelínková, Z; Rihová, H; Suchánek, I; Kaloudová, Y; Mager, R; Krupicová, H; Martincová, A

2012-08-01

The aim of this study was to determine the basic epidemiological characteristics of severely burned children who were admitted to the intensive care unit (ICU), Department of Burns and Reconstructive Surgery Faculty Hospital Brno, Czech Republic in the years 1997-2009. We collected and evaluated epidemiological data such as age, sex, burn etiology, length of hospitalization, duration of the ICU stay, surgical or conservative therapeutic strategies, the use of mechanical ventilation and its duration, day and month of injury and the extent of burned area. In total 383 children (253 boys, 130 girls) aged 0-14 years, underwent intensive care for at least 48h. Male to female ratio was 1.95:1. The average range of burn area in the group was 16.43±12.86% TBSA (total body surface area). During the reporting period, 16 children were admitted with burns over 50% TBSA. 328 children suffered burns indoors, with 55 children being burned outdoors. Indoor/outdoor ratio was set at 5.96:1. The most frequent etiological agent was scalding (hot water, soup, coffee, oil, tea). The total number of scalded children in this group was 312 (81.46%). Mechanical ventilation was used in 96 cases (25.07% of all the admitted patients). The duration of mechanical ventilation in these patients was 8.03±5.67 days in average. The average length of stay in ICU was 10.71±10.92 days and total length of hospital stay was an average of 21.55±14.55 days. A total of 184 patients (48.04%) were treated surgically and therefore required necrectomy and skin grafting. The other 199 (51.96%) patients were treated conservatively. During the reporting period 3 children died (0.78%). In our report we identify basic epidemiological data defined in the aim of this study for burned children requiring intensive care. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, D.; Fabbris, O.

Two different experiments performed in the 8 MWth MELUSINE experimental power pool reactor aimed at analyzing 1 GWd/t spent fuel pellets doped with several actinides. The goal was to measure the averaged neutron induced capture cross section in two very different neutron spectra (a PWR-like and an under-moderated one). This paper summarizes the combined deterministic APOLLO2-stochastic TRIPOLI4 analysis using the JEFF-3.1.1 European nuclear data library. A very good agreement is observed for most of neutron induced capture cross section of actinides and a clear underestimation for the {sup 241}Am(n,{gamma}) as an accurate validation of its associated isomeric ratio are emphasized.more » Finally, a possible huge resonant fluctuation (factor of 2.7 regarding to the 1=0 resonance total orbital momenta) is suggested for isomeric ratio. (authors)« less

Timing constraints on remote sensing of wildland fire burned area in the southeastern US

USGS Publications Warehouse

Picotte, J.J.; Robertson, K.

2011-01-01

Remote sensing using Landsat Thematic Mapper (TM) satellite imagery is increasingly used for mapping wildland fire burned area and burn severity, owing to its frequency of collection, relatively high resolution, and availability free of charge. However, rapid response of vegetation following fire and frequent cloud cover pose challenges to this approach in the southeastern US. We assessed these timing constraints by using a series of Landsat TM images to determine how rapidly the remotely sensed burn scar signature fades following prescribed burns in wet flatwoods and depression swamp community types in the Apalachicola National Forest, Florida, USA during 2006. We used both the Normalized Burn Ratio (NBR) of reflectance bands sensitive to vegetation and exposed soil cover, as well as the change in NBR from before to after fire (dNBR), to estimate burned area. We also determined the average and maximum amount of time following fire required to obtain a cloud-free image for burns in each month of the year, as well as the predicted effect of this time lag on percent accuracy of burn scar estimates. Using both NBR and dNBR, the detectable area decreased linearly 9% per month on average over the first four months following fire. Our findings suggest that the NBR and dNBR methods for monitoring burned area in common southeastern US vegetation community types are limited to an average of 78-90% accuracy among months of the year, with individual burns having values as low as 38%, if restricted to use of Landsat 5 TM imagery. However, the majority of burns can still be mapped at accuracies similar to those in other regions of the US, and access to additional sources of satellite imagery would improve overall accuracy. ?? 2011 by the authors.

Timing constraints on remote sensing of wildland fire burned area in the southeastern US

USGS Publications Warehouse

Picotte, Joshua J.; Robertson, Kevin

2011-01-01

Remote sensing using Landsat Thematic Mapper (TM) satellite imagery is increasingly used for mapping wildland fire burned area and burn severity, owing to its frequency of collection, relatively high resolution, and availability free of charge. However, rapid response of vegetation following fire and frequent cloud cover pose challenges to this approach in the southeastern US. We assessed these timing constraints by using a series of Landsat TM images to determine how rapidly the remotely sensed burn scar signature fades following prescribed burns in wet flatwoods and depression swamp community types in the Apalachicola National Forest, Florida, USA during 2006. We used both the Normalized Burn Ratio (NBR) of reflectance bands sensitive to vegetation and exposed soil cover, as well as the change in NBR from before to after fire (dNBR), to estimate burned area. We also determined the average and maximum amount of time following fire required to obtain a cloud-free image for burns in each month of the year, as well as the predicted effect of this time lag on percent accuracy of burn scar estimates. Using both NBR and dNBR, the detectable area decreased linearly 9% per month on average over the first four months following fire. Our findings suggest that the NBR and dNBR methods for monitoring burned area in common southeastern US vegetation community types are limited to an average of 78–90% accuracy among months of the year, with individual burns having values as low as 38%, if restricted to use of Landsat 5 TM imagery. However, the majority of burns can still be mapped at accuracies similar to those in other regions of the US, and access to additional sources of satellite imagery would improve overall accuracy.

Evaluation of TCOM/HBOT practice guideline for the treatment of foot burns occurring in diabetic patients.

PubMed

Jones, Larry M; Rubadue, Christopher; Brown, Nicole V; Khandelwal, Sorabh; Coffey, Rebecca A

2015-05-01

A multidisciplinary team developed an evidence-based guideline for the management of foot burns occurring in diabetic patients that included transcutaneous oxygen measurements (TCOM) and application of hyperbaric oxygen therapy (HBOT) to selected patients. This report represents an evaluation of preliminary TCOM/HBOT data. This is a retrospective review of patients with diabetes mellitus (DM) who were admitted to a single American Burn Association (ABA) verified burn center for the treatment of foot burns. Patients were treated via the guideline if they were over the age of 16, admitted for the initial care of burns involving the feet between 4/01/2012 and 7/22/2013, and had a known or new diagnosis of DM. Eighteen patients were treated according to the guideline, 14 men and 4 women. Average age was 54 years+14.78. Average BMI was 30.63+6.34. Median burn size was 0.88% TBSA (median partial thickness of 1% and median full thickness of 0.5%). The average HbA1c was 9.08+2.42. Seven patients received pre-operative HBOT, two received post-operative HBOT and three patients healed their wounds with HBOT alone. Average hospital length of stay was 13.39 days+9.94 and was significantly longer for the group receiving HBOT. Admission HbA1c was not a predictor of the need for HBOT. While TCOM/HBOT therapy has not been widely applied to the management of diabetic foot burns, the use of an evidence-based guideline incorporating TCOM/HBOT can provide a systematic way to evaluate the patients' microcirculation and ability to heal burns of the foot. The incorporation of TCOM determination and application of HBOT in selected patients with DM and burns of the feet warrant continued study. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Burns in sub-Saharan Africa: A review.

PubMed

Nthumba, Peter M

2016-03-01

Burns are important preventable causes of morbidity and mortality, with a disproportionate incidence in sub-Saharan Africa. The management of these injuries in sub-Saharan Africa is a challenge because of multiple other competing problems such as infectious diseases (HIV/AIDS, tuberculosis and malaria), terrorist acts and political instability. There is little investment in preventive measures, pre-hospital, in-hospital and post-discharge care of burns, resulting in high numbers of burns, high morbidity and mortality. Lack of data that can be used in legislation and policy formulation is a major hindrance in highlighting the problem of burns in this sub-region. An online search of publications on burns from sub-Saharan countries was performed. A total of 54 publications with 32,862 patients from 14 countries qualified for inclusion in the study. The average age was 15.3 years. Children aged 10 years and below represented over 80% of the burn patient population. Males constituted 55% of those who suffered burns. Scalds were the commonest cause of thermal injuries, accounting for 59% of all burns, while flame burns accounted for 33%. The burn mortality averaged 17%, or the death of one of every five burn victims. These statistics indicate the need for an urgent review of burn policies and related legislation across the sub-Saharan region to help reduce burns, and provide a safe environment for children. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Effect of Permeability of Tipping Paper on Cigarette Burning Temperature and the Property of Mainstream Smoke

NASA Astrophysics Data System (ADS)

Yao, Zhen-Yu; Shen, Yan; Huang, Hai-Qun; Xu, Ji-Cang

2016-05-01

Cigarette smoke analysis of tipping paper with different permeability was carried out. The infrared thermal imager was used to measure burning temperature of cigarette with different permeability tipping paper. The results indicated that with the increase of tipping paper permeability, Tar, CO and nicotine in cigarette mainstream were significantly linear decreased, puff count was increased. Tipping paper permeability had a great influence on cigarette burning temperature. With the increase of tipping paper permeability, the third puff burning temperature and the average peak temperature values were dropped obviously, but the changes of smoldering temperature were not obvious. In addition, smoldering average temperature was significantly lower than the third puff burning temperature and peak temperature.

Actinide metal processing

DOEpatents

Sauer, Nancy N.; Watkin, John G.

1992-01-01

A process of converting an actinide metal such as thorium, uranium, or plnium to an actinide oxide material by admixing the actinide metal in an aqueous medium with a hypochlorite as an oxidizing agent for sufficient time to form the actinide oxide material and recovering the actinide oxide material is provided together with a low temperature process of preparing an actinide oxide nitrate such as uranyl nitrte. Additionally, a composition of matter comprising the reaction product of uranium metal and sodium hypochlorite is provided, the reaction product being an essentially insoluble uranium oxide material suitable for disposal or long term storage.

Actinide metal processing

DOEpatents

Sauer, N.N.; Watkin, J.G.

1992-03-24

A process for converting an actinide metal such as thorium, uranium, or plutonium to an actinide oxide material by admixing the actinide metal in an aqueous medium with a hypochlorite as an oxidizing agent for sufficient time to form the actinide oxide material and recovering the actinide oxide material is described together with a low temperature process for preparing an actinide oxide nitrate such as uranyl nitrate. Additionally, a composition of matter comprising the reaction product of uranium metal and sodium hypochlorite is provided, the reaction product being an essentially insoluble uranium oxide material suitable for disposal or long term storage.

UF6 breeder reactor power plants for electric power generation

NASA Technical Reports Server (NTRS)

Rust, J. H.; Clement, J. D.; Hohl, F.

1976-01-01

The reactor concept analyzed is a U-233F6 core surrounded by a molten salt (Li(7)F, BeF2, ThF4) blanket. Nuclear survey calculations were carried out for both spherical and cylindrical geometries. Thermodynamic cycle calculations were performed for a variety of Rankine cycles. A conceptual design is presented along with a system layout for a 1000 MW stationary power plant. Advantages of the gas core breeder reactor (GCBR) are as follows: (1) high efficiency; (2) simplified on-line reprocessing; (3) inherent safety considerations; (4) high breeding ratio; (5) possibility of burning all or most of the long-lived nuclear waste actinides; and (6) possibility of extrapolating the technology to higher temperatures and MHD direct conversion.

Method for preparing actinide nitrides

DOEpatents

Bryan, G.H.; Cleveland, J.M.; Heiple, C.R.

1975-12-01

Actinide nitrides, and particularly plutonium and uranium nitrides, are prepared by reacting an ammonia solution of an actinide compound with an ammonia solution of a reactant or reductant metal, to form finely divided actinide nitride precipitate which may then be appropriately separated from the solution. The actinide nitride precipitate is particularly suitable for forming nuclear fuels.

Separations of actinides, lanthanides and other metals

DOEpatents

Smith, Barbara F.; Jarvinen, Gordon D.; Ensor, Dale D.

1995-01-01

An organic extracting solution comprised of a bis(acylpyrazolone or a substituted bis(acylpyrazolone) and an extraction method useful for separating certain elements of the actinide series of the periodic table having a valence of four from one other, and also from one or more of the substances in a group consisting of hexavalent actinides, trivalent actinides, trivalent lanthanides, trivalent iron, trivalent aluminum, divalent metals, and monovalent metals and also from one or more of the substances in a group consisting of hexavalent actinides, trivalent actinides, trivalent lanthanides, trivalent iron, trivalent aluminum, divalent metals, and monovalent metals and also useful for separating hexavalent actinides from one or more of the substances in a group consisting of trivalent actinides, trivalent lanthanides, trivalent iron, trivalent aluminum, divalent metals, and monovalent metals.

Actinide-ion sensor

DOEpatents

Li, Shelly X; Jue, Jan-fong; Herbst, Ronald Scott; Herrmann, Steven Douglas

2015-01-13

An apparatus for the real-time, in-situ monitoring of actinide-ion concentrations. A working electrolyte is positioned within the interior of a container. The working electrolyte is separated from a reference electrolyte by a separator. A working electrode is at least partially in contact with the working electrolyte. A reference electrode is at least partially in contact with the reference electrolyte. A voltmeter is electrically connected to the working electrode and the reference electrode. The working electrolyte comprises an actinide-ion of interest. The separator is ionically conductive to the actinide-ion of interest. The separator comprises an actinide, Zr, and Nb. Preferably, the actinide of the separator is Am or Np, more preferably Pu. In one embodiment, the actinide of the separator is the actinide of interest. In another embodiment, the separator further comprises P and O.

Recovery of transplutonium elements from nuclear reactor waste

DOEpatents

Campbell, David O.; Buxton, Samuel R.

1977-05-24

A method of separating actinide values from nitric acid waste solutions resulting from reprocessing of irradiated nuclear fuels comprises oxalate precipitation of the major portion of actinide and lanthanide values to provide a trivalent fraction suitable for subsequent actinide/lanthanide partition, exchange of actinide and lanthanide values in the supernate onto a suitable cation exchange resin to provide an intermediate-lived raffinate waste stream substantially free of actinides, and elution of the actinide values from the exchange resin. The eluate is then used to dissolve the trivalent oxalate fraction prior to actinide/lanthanide partition or may be combined with the reprocessing waste stream and recycled.

Epidemiology of burns due to domestic flammable agents.

PubMed

Pegg, S P; Beecham, L; Dore, N; Hrdlicka, D; Hukins, C

1990-04-01

An analysis of the epidemiological factors relating to domestic flammable agents has shown that 17.7 per cent of admissions over a 5-year period were involved in domestic flammable injuries; 87.7 per cent of the patients were male, with 38.9 per cent being young males between 12 and 19 years old. Petrol and diesel accounted for 56.8 per cent of the burns and the average body surface area burned was 17.7 per cent. Most commonly the face, hands and limbs were burned, and the average length of stay was 18.25 days, 69.2 per cent of the burns were due to human error and were thus potentially preventable, 21.2 per cent had predisposing conditions with 8.9 per cent being due to alcohol. It was considered that the strategies to prevent these burns injuries should be aimed particularly at young males.

Vacuum-assisted closure device as a split-thickness skin graft bolster in the burn population.

PubMed

Waltzman, Joshua T; Bell, Derek E

2014-01-01

The vacuum-assisted closure device (VAC) is associated with improved wound healing outcomes. Its use as a bolster device to secure a split-thickness skin graft has been previously demonstrated; however, there is little published evidence demonstrating its benefits specifically in the burn population. With use of the VAC becoming more commonplace, its effect on skin graft take and overall time to healing in burn patients deserves further investigation. Retrospective review of burn registry database at a high-volume level I trauma center and regional burn center during a 16-month period was performed. Patients who had a third-degree burn injury requiring a split-thickness skin graft and who received a VAC bolster were included. Data points included age, sex, burn mechanism, burn location, grafted area in square centimeters, need for repeat grafting, percent graft take, and time to complete reepithelialization. Sixty-seven patients were included in the study with a total of 88 skin graft sites secured with a VAC. Age ranged from <1 year to 84 years (average 41 years). The average grafted area was 367 ± 545 cm. The three most common were the leg, thigh, and arm (28, 15, and 12%, respectively). Average percent graft take was 99.5 ± 1.5%. Notably, no patients returned to the operating room for repeat grafting. The average time to complete reepithelialization was 16 ± 7 days. The VAC is a highly reliable and reproducible method to bolster a split-thickness skin graft in the burn population. The observed rate of zero returns to the operating room for repeat grafting was especially encouraging. Its ability to conform to contours of the body and cover large surface areas makes it especially useful in securing a graft. This method of bolstering results in decreased repeat grafting and minimal graft loss, thus decreasing morbidity compared with conventional bolster dressings.

Synthesis of actinide nitrides, phosphides, sulfides and oxides

DOEpatents

Van Der Sluys, William G.; Burns, Carol J.; Smith, David C.

1992-01-01

A process of preparing an actinide compound of the formula An.sub.x Z.sub.y wherein An is an actinide metal atom selected from the group consisting of thorium, uranium, plutonium, neptunium, and americium, x is selected from the group consisting of one, two or three, Z is a main group element atom selected from the group consisting of nitrogen, phosphorus, oxygen and sulfur and y is selected from the group consisting of one, two, three or four, by admixing an actinide organometallic precursor wherein said actinide is selected from the group consisting of thorium, uranium, plutonium, neptunium, and americium, a suitable solvent and a protic Lewis base selected from the group consisting of ammonia, phosphine, hydrogen sulfide and water, at temperatures and for time sufficient to form an intermediate actinide complex, heating said intermediate actinide complex at temperatures and for time sufficient to form the actinide compound, and a process of depositing a thin film of such an actinide compound, e.g., uranium mononitride, by subliming an actinide organometallic precursor, e.g., a uranium amide precursor, in the presence of an effectgive amount of a protic Lewis base, e.g., ammonia, within a reactor at temperatures and for time sufficient to form a thin film of the actinide compound, are disclosed.

Nonaqueous actinide hydride dissolution and production of actinide $beta$- diketonates

DOEpatents

Crisler, L.R.

1975-11-11

Actinide beta-diketonate complex molecular compounds are produced by reacting a beta-diketone compound with a hydride of the actinide material in a mixture of carbon tetrachloride and methanol. (auth)

Effects of olive tree branches burning emissions on PM2.5 concentrations

NASA Astrophysics Data System (ADS)

Papadakis, G. Z.; Megaritis, A. G.; Pandis, S. N.

2015-07-01

An olive tree branches burning emission inventory for Greece is developed based on recently measured emission factors and the spatial distribution of olive trees. A three-dimensional chemical transport model (CTM), PMCAMx, is used to estimate the corresponding impact on PM2.5 concentrations during a typical winter period. Assuming that burning of olive tree branches takes place only during days with low wind speed and without precipitation, the contribution of olive tree branches burning emissions on PM2.5 levels is more significant during the most polluted days. Increases of hourly PM2.5 exceeding 50% and locally reaching up to 150% in Crete are predicted during the most polluted periods. On a monthly-average basis, the corresponding emissions are predicted to increase PM2.5 levels up to 1.5 μg m-3 (20%) in Crete and Peloponnese, where the largest fraction of olive trees is located, and by 0.4 μg m-3 (5%) on average over Greece. OA and EC levels increase by 20% and 13% respectively on average over Greece, and up to 70% in Crete. The magnitude of the effect is quite sensitive to burning practices. Assuming that burning of olive tree branches takes place during all days results in a smaller effect of burning on PM2.5 levels (9% increase instead of 20%). These results suggest that this type of agricultural waste burning is a major source of particulate pollution in the Mediterranean countries where this practice is prevalent during winter.

Dehydration of plutonium or neptunium trichloride hydrate

DOEpatents

Foropoulos, Jr., Jerry; Avens, Larry R.; Trujillo, Eddie A.

1992-01-01

A process of preparing anhydrous actinide metal trichlorides of plutonium or neptunium by reacting an aqueous solution of an actinide metal trichloride selected from the group consisting of plutonium trichloride or neptunium trichloride with a reducing agent capable of converting the actinide metal from an oxidation state of +4 to +3 in a resultant solution, evaporating essentially all the solvent from the resultant solution to yield an actinide trichloride hydrate material, dehydrating the actinide trichloride hydrate material by heating the material in admixture with excess thionyl chloride, and recovering anhydrous actinide trichloride is provided.

Dehydration of plutonium or neptunium trichloride hydrate

DOEpatents

Foropoulos, J. Jr.; Avens, L.R.; Trujillo, E.A.

1992-03-24

A process is described for preparing anhydrous actinide metal trichlorides of plutonium or neptunium by reacting an aqueous solution of an actinide metal trichloride selected from the group consisting of plutonium trichloride or neptunium trichloride with a reducing agent capable of converting the actinide metal from an oxidation state of +4 to +3 in a resultant solution, evaporating essentially all the solvent from the resultant solution to yield an actinide trichloride hydrate material, dehydrating the actinide trichloride hydrate material by heating the material in admixture with excess thionyl chloride, and recovering anhydrous actinide trichloride.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report contains viewgraphs on the following topics. The advanced light source U8 undulator beamline, 20--300 eV; gas-phase actinide studies with synchrotron radiation; atomic structure calculations for heavy atoms; flux growth of single crystal uranium intermetallics: Extension to transuranics; x-ray absorption near-edge structure studies of actinide compounds; surface as a new stage for studying actinides: Theoretical study of the surface electronic structure of uranium; magnetic x-ray scattering experiments at resonant energies; beamline instruments for radioactive materials; the search for x-ray absorption magnetic circular dichroism in actinide materials: preliminary experiments using UFe[sub 2] and U-S; the laser plasma laboratory light source:more » a source of preliminary transuranic data; electron spectroscopy of heavy fermion actinide materials; study of thin layers of actinides. Present status and future use of synchrotron radiation; electronic structure and correlated-electron theory for actinide materials; and heavy fermion and kondo phenomena in actinide materials.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report contains viewgraphs on the following topics. The advanced light source U8 undulator beamline, 20--300 eV; gas-phase actinide studies with synchrotron radiation; atomic structure calculations for heavy atoms; flux growth of single crystal uranium intermetallics: Extension to transuranics; x-ray absorption near-edge structure studies of actinide compounds; surface as a new stage for studying actinides: Theoretical study of the surface electronic structure of uranium; magnetic x-ray scattering experiments at resonant energies; beamline instruments for radioactive materials; the search for x-ray absorption magnetic circular dichroism in actinide materials: preliminary experiments using UFe{sub 2} and U-S; the laser plasma laboratory light source:more » a source of preliminary transuranic data; electron spectroscopy of heavy fermion actinide materials; study of thin layers of actinides. Present status and future use of synchrotron radiation; electronic structure and correlated-electron theory for actinide materials; and heavy fermion and kondo phenomena in actinide materials.« less

Actinide migration in Johnston Atoll soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolf, S. F.; Bates, J. K.; Buck, E. C.

1997-02-01

Characterization of the actinide content of a sample of contaminated coral soil from Johnston Atoll, the site of three non-nuclear destructs of nuclear warhead-carrying THOR missiles in 1962, revealed that >99% of the total actinide content is associated with discrete bomb fragments. After removal of these fragments, there was an inverse correlation between actinide content and soil particle size in particles from 43 to 0.4 {micro}m diameter. Detailed analyses of this remaining soil revealed no discrete actinide phase in these soil particles, despite measurable actinide content. Observations indicate that exposure to the environment has caused the conversion of relatively insolublemore » actinide oxides to the more soluble actinyl oxides and actinyl carbonate coordinated complexes. This process has led to dissolution of actinides from discrete particles and migration to the surrounding soil surfaces, resulting in a dispersion greater than would be expected by physical transport of discrete particles alone.« less

They're heating up: Internet search query trends reveal significant public interest in heat-not-burn tobacco products.

PubMed

Caputi, Theodore L; Leas, Eric; Dredze, Mark; Cohen, Joanna E; Ayers, John W

2017-01-01

Heat-not-burn tobacco products, battery powered devices that heat leaf tobacco to approximately 500 degrees Fahrenheit to produce an inhalable aerosol, are being introduced in markets around the world. Japan, where manufacturers have marketed several heat-not-burn brands since 2014, has been the focal national test market, with the intention of developing global marketing strategies. We used Google search query data to estimate, for the first time, the scale and growth potential of heat-not-burn tobacco products. Average monthly searches for heat-not-burn products rose 1,426% (95%CI: 746,3574) between their first (2015) and second (2016) complete years on the market and an additional 100% (95%CI: 60, 173) between the products second (2016) and third years on the market (Jan-Sep 2017). There are now between 5.9 and 7.5 million heat-not-burn related Google searches in Japan each month based on September 2017 estimates. Moreover, forecasts relying on the historical trends suggest heat-not-burn searches will increase an additional 32% (95%CI: -4 to 79) during 2018, compared to current estimates for 2017 (Jan-Sep), with continued growth thereafter expected. Contrasting heat-not-burn's rise in Japan to electronic cigarettes' rise in the United States we find searches for heat-not-burn eclipsed electronic cigarette searches during April 2016. Moreover, the change in average monthly queries for heat-not-burn in Japan between 2015 and 2017 was 399 (95% CI: 184, 1490) times larger than the change in average monthly queries for electronic cigarettes in the Unites States over the same time period, increasing by 2,956% (95% CI: 1729, 7304) compared to only 7% (95% CI: 3,13). Our findings are a clarion call for tobacco control leaders to ready themselves as heat-not-burn tobacco products will likely garner substantial interest as they are introduced into new markets. Public health practitioners should expand heat-not-burn tobacco product surveillance, adjust existing tobacco control strategies to account for heat-not-burn tobacco products, and preemptively study the health risks/benefits, popular perceptions, and health messaging around heat-not-burn tobacco products.

Synthesis and Characterization of Templated Ion Exchange Resins for the Selective Complexion of Actinide Ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murrray, George M.; Uy, O. Manuel

The purpose of this research is to develop polymeric extractants for the selective complexation of uranyl ions (and subsequently other actinyl and actinide ions) from aqueous solutions. Selectivity for a specific actinide ion is obtained by providing the polymers with cavities lined with complexing ligands so arranged as to match the charge, coordination number, coordination geometry, and size of the actinide ion. These cavity-containing polymers are produced by using a specific actinide ion (or surrogate) as a template around which monomeric complexing ligands are polymerized. The polymers provide useful sequestering agents for removing actinide ions from wastes and will formmore » the basis for a variety of analytical techniques for actinide determination.« less

Closed DTU fuel cycle with Np recycle and waste transmutation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beller, D.E.; Sailor, W.C.; Venneri, F.

1999-09-01

A nuclear energy scenario for the 21st century that included a denatured thorium-uranium-oxide (DTU) fuel cycle and new light water reactors (LWRs) supported by accelerator-driven transmutation of waste (ATW) systems was previously described. This coupled system with the closed DTU fuel cycle provides several improvements beyond conventional LWR (CLWR) (once-through, UO{sub 2} fuel) nuclear technology: increased proliferation resistance, reduced waste, and efficient use of natural resources. However, like CLWR fuel cycles, the spent fuel in the first one-third core discharged after startup contains higher-quality Pu than the equilibrium fuel cycle. To eliminate this high-grade Pu, Np is separated and recycledmore » with Th and U--rather than with higher actinides [(HA) including Pu]. The presence of Np in the LWR feed greatly increases the production of {sup 238}Pu so that a few kilograms of Pu generated enough alpha-decay heat that the separated Pu is highly resistant to proliferation. This alternate process also simplifies the pyrochemical separation of fuel elements (Th and U) from HAs. To examine the advantages of this concept, the authors modeled a US deployment scenario for nuclear energy that includes DTU-LWRs plus ATW`s to burn the actinides produced by these LWRs and to close the back-end of the DTU fuel cycle.« less

New generation nuclear fuel structures: Dense particles in selectively soluble matrix

NASA Astrophysics Data System (ADS)

Devlin, Dave; Jarvinen, Gordon; Patterson, Brian; Pattillo, Steve; Valdez, James; Liu, X.-Y.; Phillips, Jonathan

2009-11-01

We have developed a technology for dispersing sub-millimeter sized fuel particles within a bulk matrix that can be selectively dissolved. This may enable the generation of advanced nuclear fuels with easy separation of actinides and fission products. The large kinetic energy of the fission products results in most of them escaping from the sub-millimeter sized fuel particles and depositing in the matrix during burning of the fuel in the reactor. After the fuel is used and allowed to cool for a period of time, the matrix can be dissolved and the fission products removed for disposal while the fuel particles are collected by filtration for recycle. The success of such an approach would meet a major goal of the GNEP program to provide advanced recycle technology for nuclear energy production. The benefits of such an approach include (1) greatly reduced cost of the actinide/fission product separation process, (2) ease of recycle of the fuel particles, and (3) a radiation barrier to prevent theft or diversion of the recycled fuel particles during the time they are re-fabricated into new fuel. In this study we describe a method to make surrogate nuclear fuels of micrometer scale W (shell)/Mo (core) or HfO 2 particles embedded in an MgO matrix that allows easy separation of the fission products and their embedded particles. In brief, the method consists of physically mixing W-Mo or hafnia particles with an MgO precursor. Heating the mixture, in air or argon, without agitation, to a temperature is required for complete decomposition of the precursor. The resulting material was examined using chemical analysis, scanning electron microscopy, X-ray diffraction and micro X-ray computed tomography and found to consist of evenly dispersed particles in an MgO + matrix. We believe this methodology can be extended to actinides and other matrix materials.

Positron Spectroscopy of Hydrothermally Grown Actinide Oxides

DTIC Science & Technology

2014-03-27

POSITRON SPECTROSCOPY OF HYDROTHERMALLY GROWN ACTINIDE OXIDES THESIS Edward C. Schneider...United States Government. AFIT-ENP-14-M-33 POSITRON SPECTROSCOPY OF HYDROTHERMALLY GROWN ACTINIDE OXIDES THESIS...33 POSITRON SPECTROSCOPY OF HYDROTHERMALLY GROWN ACTINIDE OXIDES Edward C. Schneider, BS Captain, USAF Approved

An extended version of the SERPENT-2 code to investigate fuel burn-up and core material evolution of the Molten Salt Fast Reactor

NASA Astrophysics Data System (ADS)

Aufiero, M.; Cammi, A.; Fiorina, C.; Leppänen, J.; Luzzi, L.; Ricotti, M. E.

2013-10-01

In this work, the Monte Carlo burn-up code SERPENT-2 has been extended and employed to study the material isotopic evolution of the Molten Salt Fast Reactor (MSFR). This promising GEN-IV nuclear reactor concept features peculiar characteristics such as the on-line fuel reprocessing, which prevents the use of commonly available burn-up codes. Besides, the presence of circulating nuclear fuel and radioactive streams from the core to the reprocessing plant requires a precise knowledge of the fuel isotopic composition during the plant operation. The developed extension of SERPENT-2 directly takes into account the effects of on-line fuel reprocessing on burn-up calculations and features a reactivity control algorithm. It is here assessed against a dedicated version of the deterministic ERANOS-based EQL3D procedure (PSI-Switzerland) and adopted to analyze the MSFR fuel salt isotopic evolution. Particular attention is devoted to study the effects of reprocessing time constants and efficiencies on the conversion ratio and the molar concentration of elements relevant for solubility issues (e.g., trivalent actinides and lanthanides). Quantities of interest for fuel handling and safety issues are investigated, including decay heat and activities of hazardous isotopes (neutron and high energy gamma emitters) in the core and in the reprocessing stream. The radiotoxicity generation is also analyzed for the MSFR nominal conditions. The production of helium and the depletion in tungsten content due to nuclear reactions are calculated for the nickel-based alloy selected as reactor structural material of the MSFR. These preliminary evaluations can be helpful in studying the radiation damage of both the primary salt container and the axial reflectors.

Energy balance studies and plasma catecholamine values for patients with healed burns.

PubMed

Wallace, B H; Cone, J B; Caldwell, F T

1991-01-01

We report heat balance studies and plasma catecholamine values for 49 children and young adults with healed burn wounds (age range 0.6 to 31 years and burn range 1% to 82% body surface area burned; mean 41%). All measurements were made during the week of discharge. Heat production for patients with healed burns was not significantly different from predicted normal values. However, compartmented heat loss demonstrated a persistent increment in evaporative heat loss that was secondary to continued elevation of cutaneous water vapor loss immediately after wound closure. A reciprocal decrement in dry heat loss was demonstrated (as a result of a cooler average surface temperature, 0.84 degree C cooler than the average integrated skin temperature of five normal volunteers who were studied in our unit under similar environmental conditions). Mean values for plasma catecholamines were in the normal range: epinephrine = 56 +/- 37 pg/ml, norepinephrine = 385 +/- 220 pg/ml, and dopamine = 34 +/- 29 pg/ml. In conclusion, patients with freshly healed burn wounds have normal rates of heat production; however, there is a residual increment in transcutaneous water vapor loss, which produces surface cooling and decreased average surface temperature, which in turn lowers dry heat loss by an approximately equivalent amount.

How is the chlorophyll count affected by burned and unburned marsh areas?

NASA Astrophysics Data System (ADS)

Kendrick, C.

2017-12-01

Does marsh burnings, either man made or natural, hinder or help Louisiana's vitally important coastal plant life? Does the carbon produced from the fires have a negative effect on the chlorophyll count of these precious living protective barriers? Or does it help contribute to raising the plants chlorophyll count? Along Louisiana's Gulf Coast, marsh burnings are conducted every 2-4 years to destroy some of the Spartina patens. Fires and smoke may have an effect on the chlorophyll count of the plants found in Louisiana's marshes. Peat burns, root burns, and cover burns are the three types of marsh fires. These burns can be either man made or started by natural causes. Peat burns occur when the soil is dry due to a drained marsh. Root burns occur when plant roots are burned without the soil being consumed. Cover burns occur when several centimeters of water covers the soil. Cover burns are often used by Wildlife and Fisheries personnel to promote preferred plant food growth like Scirpus olneyi rather than the dominant Spartina patens. Our project was conducted by testing marsh plants and obtaining chlorophyll count of both a burned (cover burn) and an unburned area. Approximately one year after the burn, in August 2015, we tested the burned area's site. We retested the same site in December 2016. The results from our testing showed that there was a slightly higher chlorophyll count in the burned area. The chlorophyll count average from the two testing days was 33.5 in the burned area and 30.15 in the unburned area. Our hypothesis was that the chlorophyll content of "controlled" burned wetland areas will have a higher amount than the "no" burn area. The experiment results supported this hypothesis by showing an increase of 3.35 average in the burned area.

Epidemiology of pediatric burns in southwest China from 2011 to 2015.

PubMed

Li, Haisheng; Wang, Song; Tan, Jianglin; Zhou, Junyi; Wu, Jun; Luo, Gaoxing

2017-09-01

Burns are a major form of injury in children worldwide. This study aimed to investigate the epidemiology, outcome, cost and risk factors of pediatric burns in southwest China. This retrospective study was performed at the Institute of Burn Research of the Third Military Medical University from 2011 to 2015. Data, including demographic, injury-related, and clinical data and patient outcome, were collected from medical records. A total of 2478 children with burns (58.03% boys), accounting for 39.2% of total burn patients, were included. The average age of the burn patients was 2.86±2.86years, and most patients (85.55%) were under five years old. The incidence of burns peaked in January, February and May. Scald burns were the most frequent (79.06%), followed by flame burns (14.0%) and electrical burns (3.35%). Limbs were the most common burn sites (69.73%), and the average total body surface area (TBSA) was 11.57±11.61%. The percentage of children who underwent operations and the number of operations were significantly increased in cases of electrical burns, the older-age group, a larger TBSA and full-thickness burns. Six deaths were recorded, yielding a mortality of 0.24%. The median length of stay and cost were 14days and 9541 CNY, respectively, and the major risk factors for length of stay and cost were the TBSA, number of operations, full-thickness burns and outcome. In southwest China, among children under five years old, scald and flame burns should become the key prevention target, and future prevention strategies should be based on related risk factors. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Extra-large negative pressure wound therapy dressings for burns - Initial experience with technique, fluid management, and outcomes.

PubMed

Fischer, Sebastian; Wall, Jennifer; Pomahac, Bohdan; Riviello, Robert; Halvorson, Eric G

2016-03-01

The use of negative-pressure-wound-therapy (NPWT) is associated with improved outcomes in smaller burns. We report our experience using extra-large (XL) NPWT dressings to treat ≥15% total body surface area (TBSA) burned and describe our technique and early outcomes. We also provide NPWT exudate volume for predictive fluid resuscitation in these critically ill patients. We retrospectively reviewed patients treated with XL-NPWT from 2012 to 2014. Following excision/grafting, graft and donor sites were sealed with a layered NPWT dressing. We documented wound size, dressing size, NPWT outputs, graft take, wound infections, and length of stay (LOS). Mean NPWT exudate volume per %TBSA per day was calculated. Twelve burn patients (mean TBSA burned 30%, range 15-60%) were treated with XL-NPWT (dressing TBSA burned and skin graft donor sites range 17-44%). Average graft take was 97%. No wound infections occurred. Two patients had burns ≥50% TBSA and their LOS was reduced compared to ABA averages. XL-NPWT outputs peaked at day 1 after grafting followed by a steady decline until dressings were removed. Average XL-NPWT dressing output during the first 5 days was 101±66mL/%BSA covered per day. 2 patients developed acute kidney injury. The use of XL-NPWT to treat extensive burns is feasible with attention to application technique. NPWT dressings appear to improve graft take, and to decrease risk of infection, LOS, and pain and anxiety associated with wound care. Measured fluid losses can improve patient care in future applications of NPWT to large burn wounds. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Cost analysis of acute burn patients treated in a burn centre: the Gulhane experience

PubMed Central

Sahin, I.; Ozturk, S.; Alhan, D.; Açikel, C.; Isik, S.

2011-01-01

Summary Even if calculating the exact cost of burn treatment is a very hard task, the study of cost analysis provides financial perspective. We performed a cost analysis study in our burn centre to respond to questions about total patient treatment cost and the length of hospital stay. We reviewed all patients admitted to the Gulhane Military Medical Academy Burn Centre in Ankara, Turkey, between March 2005 and August 2008. Forty-three patients with major burns were identified on the basis of the study criteria. The data regarding total treatment cost and the length of hospital stay for each type of burn (flame, scald, electric) were collected at the end of the study. The average total body surface area burned was 36 ± 7%.. The average duration of hospital stay was 73 ± 33 days. Patients with electrical burns stayed longer in hospital than patients with other types of burn injuries. Each one per cent of burn corresponded to a mean hospital stay of two days. The overall mean total cost was $US 15,250. The mean total cost of electrical burns was the highest, with $US 22,501 ± 24,039. Even if the costs associated with burn injury are higher than some other well-known health-related problems, they have not been much studied. Reports have produced different results, but it should be kept in mind that although the results of cost analysis studies may vary they must be performed in all newly established burn centres in order to form a financial overview. PMID:21991233

Evaluating the socioeconomic and cultural factors associated with pediatric burn injuries in Maputo, Mozambique.

PubMed

Karan, Abraar; Amado, Vanda; Vitorino, Pio; Kulber, David; Taela, Atanasio; DeUgarte, Daniel A

2015-11-01

Pediatric burn injuries are one of the leading causes of preventable morbidity and mortality in Sub-Saharan Africa. Research on the complex system of social, economic and cultural factors contributing to burn injuries in this setting is much needed. We conducted a prospective questionnaire-based analysis of pediatric burn patients presenting to the Hospital Central de Maputo. A total of 39 patients were included in the study. Interviews were conducted with the children's caretakers by two trained medical students at the Eduardo Mondlane Medical School in Maputo with the aid of local nursing staff. Most burns occurred from scald wounds (26/39) particularly from bathwater, followed by fire burns (11/39). Burns occurred more frequently in the afternoon (16/39) and evening (16/39). Over one quarter of burns (9/33) occurred in the absence of a caretaker. One-third (12/36) of participants attempted to treat the burn at home prior to bringing the child into the hospital, and roughly two-thirds (24/37) reported using traditional remedies for burn care. The average household had just 2 rooms for an average of 5 family members. Most burns were second degree (25/37). Prevention efforts in this setting are much needed and can be implemented taking complex cultural and social factors into account. Education regarding regulation of water temperature for baths is important, given the prevalence of scald burns. Moreover, the introduction of low-cost, safer cooking technology can help mitigate inhalation injury and reduce fire burns. Additionally, burn care systems must be integrated with local traditional medical interventions to respect local cultural medicinal practices.

Microscopic analysis of octupole shape transitions in neutron-rich actinides with relativistic energy density functional

NASA Astrophysics Data System (ADS)

Xu, Zhong; Li, Zhi-Pan

2017-12-01

Quadrupole and octupole deformation energy surfaces, low-energy excitation spectra, and electric transition rates in eight neutron-rich isotopic chains - Ra, Th, U, Pu, Cm, Cf, Fm, and No - are systematically analyzed using a quadrupole-octupole collective Hamiltonian model, with parameters determined by constrained reflection-asymmetric and axially-symmetric relativistic mean-field calculations based on the PC-PK1 energy density functional. The theoretical results of low-lying negative-parity bands, odd-even staggering, average octupole deformations ⟨β 3⟩, and show evidence of a shape transition from nearly spherical to stable octupole-deformed, and finally octupole-soft equilibrium shapes in the neutron-rich actinides. A microscopic mechanism for the onset of stable octupole deformation is also discussed in terms of the evolution of single-nucleon orbitals with deformation. Supported by National Natural Science Foundation of China (11475140, 11575148)

Actinide Waste Forms and Radiation Effects

NASA Astrophysics Data System (ADS)

Ewing, R. C.; Weber, W. J.

Over the past few decades, many studies of actinides in glasses and ceramics have been conducted that have contributed substantially to the increased understanding of actinide incorporation in solids and radiation effects due to actinide decay. These studies have included fundamental research on actinides in solids and applied research and development related to the immobilization of the high level wastes (HLW) from commercial nuclear power plants and processing of nuclear weapons materials, environmental restoration in the nuclear weapons complex, and the immobilization of weapons-grade plutonium as a result of disarmament activities. Thus, the immobilization of actinides has become a pressing issue for the twenty-first century (Ewing, 1999), and plutonium immobilization, in particular, has received considerable attention in the USA (Muller et al., 2002; Muller and Weber, 2001). The investigation of actinides and

They’re heating up: Internet search query trends reveal significant public interest in heat-not-burn tobacco products

PubMed Central

Caputi, Theodore L.; Leas, Eric; Dredze, Mark; Cohen, Joanna E.; Ayers, John W.

2017-01-01

Heat-not-burn tobacco products, battery powered devices that heat leaf tobacco to approximately 500 degrees Fahrenheit to produce an inhalable aerosol, are being introduced in markets around the world. Japan, where manufacturers have marketed several heat-not-burn brands since 2014, has been the focal national test market, with the intention of developing global marketing strategies. We used Google search query data to estimate, for the first time, the scale and growth potential of heat-not-burn tobacco products. Average monthly searches for heat-not-burn products rose 1,426% (95%CI: 746,3574) between their first (2015) and second (2016) complete years on the market and an additional 100% (95%CI: 60, 173) between the products second (2016) and third years on the market (Jan-Sep 2017). There are now between 5.9 and 7.5 million heat-not-burn related Google searches in Japan each month based on September 2017 estimates. Moreover, forecasts relying on the historical trends suggest heat-not-burn searches will increase an additional 32% (95%CI: -4 to 79) during 2018, compared to current estimates for 2017 (Jan-Sep), with continued growth thereafter expected. Contrasting heat-not-burn’s rise in Japan to electronic cigarettes’ rise in the United States we find searches for heat-not-burn eclipsed electronic cigarette searches during April 2016. Moreover, the change in average monthly queries for heat-not-burn in Japan between 2015 and 2017 was 399 (95% CI: 184, 1490) times larger than the change in average monthly queries for electronic cigarettes in the Unites States over the same time period, increasing by 2,956% (95% CI: 1729, 7304) compared to only 7% (95% CI: 3,13). Our findings are a clarion call for tobacco control leaders to ready themselves as heat-not-burn tobacco products will likely garner substantial interest as they are introduced into new markets. Public health practitioners should expand heat-not-burn tobacco product surveillance, adjust existing tobacco control strategies to account for heat-not-burn tobacco products, and preemptively study the health risks/benefits, popular perceptions, and health messaging around heat-not-burn tobacco products. PMID:29020019

Dynamic leaching studies of 48 MWd/kgU UO2 commercial spent nuclear fuel under oxic conditions

NASA Astrophysics Data System (ADS)

Serrano-Purroy, D.; Casas, I.; González-Robles, E.; Glatz, J. P.; Wegen, D. H.; Clarens, F.; Giménez, J.; de Pablo, J.; Martínez-Esparza, A.

2013-03-01

The leaching of a high-burn-up spent nuclear fuel (48 MWd/KgU) has been studied in a carbonate-containing solution and under oxic conditions using a Continuously Stirred Tank Flow-Through Reactor (CSTR). Two samples of the fuel, one prepared from the centre of the pellet (labelled CORE) and another one from the fuel pellet periphery, enriched with the so-called High Burn-Up Structure (HBS, labelled OUT) have been used.For uranium and actinides, the results showed that U, Np, Am and Cm gave very similar normalized dissolution rates, while Pu showed slower dissolution rates for both samples. In addition, dissolution rates were consistently two to four times lower for OUT sample compared to CORE sample.Considering the fission products release the main results are that Y, Tc, La and Nd dissolved very similar to uranium; while Cs, Sr, Mo and Rb have up to 10 times higher dissolution rates. Rh, Ru and Zr seemed to have lower dissolution rates than uranium. The lowest dissolution rates were found for OUT sample.Three different contributions were detected on uranium release, modelled and attributed to oxidation layer, fines and matrix release.

Ultratrace analysis of transuranic actinides by laser-induced fluorescence

DOEpatents

Miller, S.M.

1983-10-31

Ultratrace quantities of transuranic actinides are detected indirectly by their effect on the fluorescent emissions of a preselected fluorescent species. Transuranic actinides in a sample are coprecipitated with a host lattice material containing at least one preselected fluorescent species. The actinide either quenches or enhances the laser-induced fluorescence of the preselected fluorescent species. The degree of enhancement or quenching is quantitatively related to the concentration of actinide in the sample.

Healthcare costs of burn patients from homes without fire sprinklers

PubMed Central

Banfield, Joanne; Rehou, Sarah; Gomez, Manuel; Redelmeier, Donald A.; Jeschke, Marc G.

2014-01-01

The treatment of burn injuries requires high-cost services for healthcare and society. Automatic fire sprinklers are a preventive measure that can decrease fire injuries, deaths, property damage and environmental toxins. This study’s aim was to conduct a cost-analysis of patients with burn or inhalation injuries due to residential fires, and to compare this to the cost of implementing residential automatic fire sprinklers. We conducted a cohort analysis of adult burn patients admitted to our provincial burn center (1995–2012). Patient demographics and injury characteristics were collected from medical records, and clinical and coroner databases. Resource costs included average cost per day at our intensive care and rehabilitation program, transportation, and property loss. During the study period there were 1,557 residential fire-related deaths province-wide and 1,139 patients were admitted to our provincial burn center due to a flame injury occurring at home. At our burn center, the average cost was CAN$84,678 per patient with a total cost of CAN$96,448,194. All resources totaled CAN$3,605,775,200. This study shows the considerable healthcare costs of burn patients from homes without fire sprinklers. PMID:25412056

Preventable burns associated with the misuse of gasoline.

PubMed

Barillo, D J; Stetz, C K; Zak, A L; Shirani, K Z; Goodwin, C W

1998-08-01

Gasoline is intended for use as a motor fuel, but the universal availability of gasoline in the home encourages misuse as a solvent, insecticide, accelerant or cleaning solution. The careless or inappropriate use of gasoline may result in burn injury. We examined the circumstance of gasoline-related injury in a population admitted to one burn centre to determine the potential for burn prevention efforts. A retrospective review of all burn admissions to one centre for the years 1978 to 1996 demonstrated hat 1011 of 4339 acute admissions (23.3%) were gasoline-related. This group had an average total burn size of 29.8% total body surface (TBSA) and an average full thickness injury of 14.4% TBSA. There were 144 fatalities resulting from gasoline-associated burn injury. Where such determination could be made, the use of gasoline was judged to be inappropriate or unsafe in 687 of 788 cases (87.1%). Ninety of 144 fatalities (62.5%) were associated with inappropriate or unsafe use of gasoline. The careless or inappropriate use of gasoline poses significant risk of burn injury. The indoor use of gasoline, as well as use of gasoline for purposes other than as a motor fuel, should be strongly discouraged.

A review of the peri-operative management of paediatric burns: Identifying adverse events.

PubMed

Rode, H; Brink, C; Bester, K; Coleman, M P; Baisey, T; Martinez, R

2016-11-02

Burn injuries are common in poverty-stricken countries. The majority of patients with large and complex burns are referred to burn centres. Of the children who qualify for admission, according to burn admission criteria, about half require some kind of surgical procedure to obtain skin cover. These range from massive full-thickness fire burns to skin grafts for small, residual unhealed wounds. Burn anaesthetic procedures are of the most difficult to perform and are known for high complication rates. Reasons include peri-operative sepsis, bleeding, issues around thermoregulation, the hypermetabolic state, nutritional and electrolyte issues, inhalation injuries and the amount of movement during procedures to wash patients, change drapes and access different anatomical sites. The appropriate execution of surgery is therefore of the utmost importance for both minor and major procedures. To review the peri-operative management and standard of surgical care of burnt children. This was a retrospective review and analysis of standard peri-operative care of burnt children at Red Cross War Memorial Children's Hospital, Cape Town, South Africa. A total of 558 children were operated on and supervised by the first author. Factors that could adversely affect surgical and anaesthetic outcomes were identified. There were 257 males and 301 females in this study, with an average age of 50.1 months and average weight of 19.5 kg. The total body surface area involved was 1 - 80%, with an average of 23.5%. Inhalational injury was present in 11.3%, pneumonia in 13.1%, wound sepsis in 20.8%, and septicaemia in 9.7%, and organ dysfunction in more than one organ was seen in 6.1%. The average theatre temperature during surgery was 30.0°C. Core temperatures recorded at the start, halfway through and at completion of surgery were 36.9°C, 36.8°C and 36.5°C, respectively. The average preoperative and postoperative haemoglobin levels were 11.28 g/dL and 9.64 g/dL, respectively. Blood loss was reduced by the use of clysis from 1.5 mL/kg/% burn to 1.4 mL/kg/% burn. Adverse intraoperative events were seen in 17.6% of children. Burn surgery is a high-risk procedure and comorbidities are common. Anaesthesia and surgery must be well planned and executed with special reference to temperature control, rapid blood loss, preceding respiratory illnesses and measures to reduce blood loss.

On the Suitability of Lanthanides as Actinide Analogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szigethy, Geza; Raymond, Kenneth N.

2008-04-11

With the current level of actinide materials used in civilian power generation and the need for safe and efficient methods for the chemical separation of these species from their daughter products and for long-term storage requirements, a detailed understanding of actinide chemistry is of great importance. Due to the unique bonding properties of the f-elements, the lanthanides are commonly used as structural and chemical models for the actinides, but differences in the bonding between these 4f and 5f elements has become a question of immediate applicability to separations technology. This brief overview of actinide coordination chemistry in the Raymond groupmore » at UC Berkeley/LBNL examines the validity of using lanthanide analogs as structural models for the actinides, with particular attention paid to single crystal X-ray diffraction structures. Although lanthanides are commonly accepted as reasonable analogs for the actinides, these comparisons suggest the careful study of actinide materials independent of their lanthanide analogs to be of utmost importance to present and future efforts in nuclear industries.« less

Physical and chemical characterization of actinides in soil from Johnston Atoll

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolf, S.F.; Bates, J.K.; Buck, E.C.

1997-02-01

Characterization of the actinide content of a sample of contaminated coral soil from Johnston Atoll, the site of three non-nuclear destructs of nuclear warhead-carrying THOR missiles in 1962, revealed that >99% of the total actinide content is associated with discrete bomb fragments. After removal of these fragments, there was an inverse correlation between actinide content and soil particle size in particles from 43 to 0.4 {mu}m diameter. Detailed analyses of this remaining soil revealed no discrete actinide phase in these soil particles, despite measurable actinide content. Observations indicate that exposure to the environment has caused the conversion of relatively insolublemore » actinide oxides to the more soluble actinyl oxides and actinyl carbonate coordinated complexes. This process has led to dissolution of actinides from discrete particles and migration to the surrounding soil surfaces, resulting in a dispersion greater than would be expected by physical transport of discrete particles alone. 26 refs., 4 figs., 1 tab.« less

Phytosiderophore effects on subsurface actinide contaminants: potential for phytostabilization and phytoextraction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruggiero, C. E.; Twary, S. N.; Deladurantaye, E.

2003-01-01

In recognition of the need for a safe, effective technology for long term Pu/Th/Actinide stabilization or removal from soils, we have begun an investigation of the potential for phytoremediation (phytostabilization and/or phytoextraction) of Pu and other actinide soil contaminants at DOE sites using phytosiderophore producing plants, and are investigating the contribution of phytosiderophores to actinide mobility in the subsurface environment. Phytoremediation and Phytostabilization have been proven to be a cost-effective, safe, efficient, and publicly acceptable technology for clean up and/or stabilization of contaminant metals . However, no phyto-based technologies have been developed for stabilization or removal of plutonium from soilsmore » and groundwater, and very few have been investigated for other actinides . Current metal-phytostabilization and phytoremediation techniques, predominately based around lead, nickel, and other soft-metal phytoextraction, will almost certainly be inadequate for plutonium due its distinct chemical properties . Phytosiderophore-based phytoremediation may provide technically and financially practical methods for remediation and long-term stewardship of soils that have low to moderate, near surface actinide contamination . We plan to demonstrate potential benefits of phytosiderophore-producing plants for long-term actinide contaminant stabilization by the plant's prevention of soil erosion and actinide migration through hydraulic control and/or through actinide removal through phytoextraction . We may also show possible harm caused by these plants through increased presence of actinide chelators that could increase actinide mobilization and migration in the subsurface environment. This information can then be directly applied by either removal of harmful plants, or be used to develop plant-based soil stabilization/remediation technologies .« less

Synthesis and characterisation of PuPO4 - a potential analytical standard for EPMA actinide quantification

NASA Astrophysics Data System (ADS)

Wright, K. E.; Popa, K.; Pöml, P.

2018-01-01

Transmutation nuclear fuels contain weight percentage quantities of actinide elements, including Pu, Am and Np. Because of the complex spectra presented by actinide elements using electron probe microanalysis (EPMA), it is necessary to have relatively pure actinide element standards to facilitate overlap correction and accurate quantitation. Synthesis of actinide oxide standards is complicated by their multiple oxidation states, which can result in inhomogeneous standards or standards that are not stable at atmospheric conditions. Synthesis of PuP4 results in a specimen that exhibits stable oxidation-reduction chemistry and is sufficiently homogenous to serve as an EPMA standard. This approach shows promise as a method for producing viable actinide standards for microanalysis.

Method for recovery of actinides from actinide-bearing scrap and waste nuclear material using O/sub 2/F/sub 2/

DOEpatents

Asprey, L.B.; Eller, P.G.

1984-09-12

Method for recovery of actinides from nuclear waste material containing sintered and other oxides thereof and from scrap materials containing the metal actinides using O/sub 2/F/sub 2/ to generate the hexafluorides of the actinides present therein. The fluorinating agent, O/sub 2/F/sub 2/, has been observed to perform the above-described tasks at sufficiently low temperatures that there is virtually no damage to the containment vessels. Moreover, the resulting actinide hexafluorides are not detroyed by high temperature reactions with the walls of the reaction vessel. Dioxygen difluoride is readily prepared, stored and transferred to the place of reaction.

Evaluating the Socioeconomic and Cultural Factors Associated with Pediatric Burn Injuries in Maputo, Mozambique

PubMed Central

Karan, Abraar; Amado, Vanda; Vitorino, Pio; Kulber, David; Taela, Atanasio; DeUgarte, Daniel

2015-01-01

Background Pediatric burn injuries are one of the leading causes of preventable morbidity and mortality in Sub-Saharan Africa. Research on the complex system of social, economic and cultural factors contributing to burn injuries in this setting is much needed. Methods We conducted a prospective questionnaire-based analysis of pediatric burn patients presenting to the Hospital Central de Maputo. A total of 39 patients were included in the study. Interviews were conducted with the children’s caretakers by two trained medical students at the Eduardo Mondlane Medical School in Maputo with the aid of local nursing staff. Results Most burns occurred from scald wounds (26/39) particularly from bathwater, followed by fire burns (11/39). Burns occurred more frequently in the afternoon (16/39) and evening (16/39). Over one quarter of burns (9/33) occurred in the absence of a caretaker. One third (12/36) of participants attempted to treat the burn at home prior to bringing the child in to the hospital, and roughly two-thirds (24/37) reported using traditional remedies for burn care. The average household had just 2 rooms for an average of 5 family members. Most burns were grade II (25/37). Conclusions Prevention efforts in this setting are much needed and can be implemented taking complex cultural and social factors into account. Education regarding regulation of water temperature for baths is important, given the prevalence of scald burns. Moreover, the introduction of low-cost, safer cooking technology can help mitigate inhalation injury and reduce fire burns. Additionally, burn care systems must be integrated with local traditional medical interventions to respect local cultural medicinal practices. PMID:26280740

Actinide extraction methods

DOEpatents

Peterman, Dean R [Idaho Falls, ID; Klaehn, John R [Idaho Falls, ID; Harrup, Mason K [Idaho Falls, ID; Tillotson, Richard D [Moore, ID; Law, Jack D [Pocatello, ID

2010-09-21

Methods of separating actinides from lanthanides are disclosed. A regio-specific/stereo-specific dithiophosphinic acid having organic moieties is provided in an organic solvent that is then contacted with an acidic medium containing an actinide and a lanthanide. The method can extend to separating actinides from one another. Actinides are extracted as a complex with the dithiophosphinic acid. Separation compositions include an aqueous phase, an organic phase, dithiophosphinic acid, and at least one actinide. The compositions may include additional actinides and/or lanthanides. A method of producing a dithiophosphinic acid comprising at least two organic moieties selected from aromatics and alkyls, each moiety having at least one functional group is also disclosed. A source of sulfur is reacted with a halophosphine. An ammonium salt of the dithiophosphinic acid product is precipitated out of the reaction mixture. The precipitated salt is dissolved in ether. The ether is removed to yield the dithiophosphinic acid.

On the suitability of lanthanides as actinide analogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, Kenneth; Szigethy, Geza

2008-07-01

With the current level of actinide materials used in civilian power generation and the need for safe and efficient methods for the chemical separation of these species from their daughter products and for long-term storage requirements, a detailed understanding of actinide chemistry is of great importance. Due to the unique bonding properties of the f-elements, the lanthanides are commonly used as structural and chemical models for the actinides, but differences in the bonding between these 4f and 5f elements has become a question of immediate applicability to separations technology. This brief overview of actinide coordination chemistry in the Raymond groupmore » at UC Berkeley/LBNL examines the validity of using lanthanide analogs as structural models for the actinides, with particular attention paid to single crystal X-ray diffraction structures. Although lanthanides are commonly accepted as reasonable analogs for the actinides, these comparisons suggest the careful study of actinide materials independent of their lanthanide analogs to be of utmost importance to present and future efforts in nuclear industries. (authors)« less

Gas core reactors for actinide transmutation. [uranium hexafluoride

NASA Technical Reports Server (NTRS)

Clement, J. D.; Rust, J. H.; Wan, P. T.; Chow, S.

1979-01-01

The preliminary design of a uranium hexafluoride actinide transmutation reactor to convert long-lived actinide wastes to shorter-lived fission product wastes was analyzed. It is shown that externally moderated gas core reactors are ideal radiators. They provide an abundant supply of thermal neutrons and are insensitive to composition changes in the blanket. For the present reactor, an initial load of 6 metric tons of actinides is loaded. This is equivalent to the quantity produced by 300 LWR-years of operation. At the beginning, the core produces 2000 MWt while the blanket generates only 239 MWt. After four years of irradiation, the actinide mass is reduced to 3.9 metric tonnes. During this time, the blanket is becoming more fissile and its power rapidly approaches 1600 MWt. At the end of four years, continuous refueling of actinides is carried out and the actinide mass is held constant. Equilibrium is essentially achieved at the end of eight years. At equilibrium, the core is producing 1400 MWt and the blanket 1600 MWt. At this power level, the actinide destruction rate is equal to the production rate from 32 LWRs.

Incidence and cost of non-fatal burns in Iran: a nationwide population-based study.

PubMed

Abouie, Abolfazl; Salamati, Payman; Hafezi-Nejad, Nima; Rahimi-Movaghar, Afarin; Saadat, Soheil; Amin-Esmaeili, Masoumeh; Sharifi, Vandad; Hajebi, Ahmad; Rahimi-Movaghar, Vafa

2018-03-01

To determine the incidence and cost of non-fatal burns in Iran; this cross-sectional household survey of a nationally representative sample of 15-64 years old was conducted. Through face-to-face interviews and telephone calls, the data on the demographics, history and cost of burns were collected. The annual incidence rate of burns was estimated 129.85 per 1000 population. Burns occurred higher in younger age, female gender and urban residency. The most common burn description was as follows: unpaid work (activity during burn), home (place of burn), heat and hot substances (mechanism of burn) and upper limb (site of burn). The average total cost of burn includes victims seeking medical care was US$124 per case. The main findings of this study suggest that burns are a major public health concern in Iran. To stop this important health issue, a national program for burn prevention and education must be developed.

Report From the California Burn Registry—The Causes of Major Burns

PubMed Central

Bongard, Frederic S.; Ostrow, Louis B.; Sacks, Susan T.; McGuire, Andrew; Trunkey, Donald D.

1985-01-01

In its first four years of operation, the California Burn Registry recorded 3,332 cases of burns, of which 73.1% were in male and 26.9% were in female patients of all ages. The average total body surface area burned was 15.4±0.3%. Flame burns were the most common (31.4%). Other common sources included scalds (24.5%) and flammable liquids (12.9%). Several other causes were cited with less frequency. Burns taking place at home occurred more commonly than at all other locations combined. In all, 221 deaths (6.6%) were reported, most (66.1%) of which were due to flame burns. PMID:4013280

Overview of actinide chemistry in the WIPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borkowski, Marian; Lucchini, Jean - Francois; Richmann, Michael K

2009-01-01

The year 2009 celebrates 10 years of safe operations at the Waste Isolation Pilot Plant (WIPP), the only nuclear waste repository designated to dispose defense-related transuranic (TRU) waste in the United States. Many elements contributed to the success of this one-of-the-kind facility. One of the most important of these is the chemistry of the actinides under WIPP repository conditions. A reliable understanding of the potential release of actinides from the site to the accessible environment is important to the WIPP performance assessment (PA). The environmental chemistry of the major actinides disposed at the WIPP continues to be investigated as partmore » of the ongoing recertification efforts of the WIPP project. This presentation provides an overview of the actinide chemistry for the WIPP repository conditions. The WIPP is a salt-based repository; therefore, the inflow of brine into the repository is minimized, due to the natural tendency of excavated salt to re-seal. Reducing anoxic conditions are expected in WIPP because of microbial activity and metal corrosion processes that consume the oxygen initially present. Should brine be introduced through an intrusion scenario, these same processes will re-establish reducing conditions. In the case of an intrusion scenario involving brine, the solubilization of actinides in brine is considered as a potential source of release to the accessible environment. The following key factors establish the concentrations of dissolved actinides under subsurface conditions: (1) Redox chemistry - The solubility of reduced actinides (III and IV oxidation states) is known to be significantly lower than the oxidized forms (V and/or VI oxidation states). In this context, the reducing conditions in the WIPP and the strong coupling of the chemistry for reduced metals and microbiological processes with actinides are important. (2) Complexation - For the anoxic, reducing and mildly basic brine systems in the WIPP, the most important inorganic complexants are expected to be carbonate/bicarbonate and hydroxide. There are also organic complexants in TRU waste with the potential to strongly influence actinide solubility. (3) Intrinsic and pseudo-actinide colloid formation - Many actinide species in their expected oxidation states tend to form colloids or strongly associate with non actinide colloids present (e.g., microbial, humic and organic). In this context, the relative importance of actinides, based on the TRU waste inventory, with respect to the potential release of actinides from the WIPP, is greater for plutonium and americium, and to less extent for uranium and thorium. The most important oxidation states for WIPP-relevant conditions are III and IV. We will present an update of the literature on WIPP-specific data, and a summary of the ongoing research related to actinide chemistry in the WIPP performed by the Los Alamos National Laboratory (LANL) Actinide Chemistry and Repository Science (ACRSP) team located in Carlsbad, NM [Reed 2007, Lucchini 2007, and Reed 2006].« less

The validation study on a three-dimensional burn estimation smart-phone application: accurate, free and fast?

PubMed

Cheah, A K W; Kangkorn, T; Tan, E H; Loo, M L; Chong, S J

2018-01-01

Accurate total body surface area burned (TBSAB) estimation is a crucial aspect of early burn management. It helps guide resuscitation and is essential in the calculation of fluid requirements. Conventional methods of estimation can often lead to large discrepancies in burn percentage estimation. We aim to compare a new method of TBSAB estimation using a three-dimensional smart-phone application named 3D Burn Resuscitation (3D Burn) against conventional methods of estimation-Rule of Palm, Rule of Nines and the Lund and Browder chart. Three volunteer subjects were moulaged with simulated burn injuries of 25%, 30% and 35% total body surface area (TBSA), respectively. Various healthcare workers were invited to use both the 3D Burn application as well as the conventional methods stated above to estimate the volunteer subjects' burn percentages. Collective relative estimations across the groups showed that when used, the Rule of Palm, Rule of Nines and the Lund and Browder chart all over-estimated burns area by an average of 10.6%, 19.7%, and 8.3% TBSA, respectively, while the 3D Burn application under-estimated burns by an average of 1.9%. There was a statistically significant difference between the 3D Burn application estimations versus all three other modalities ( p  < 0.05). Time of using the application was found to be significantly longer than traditional methods of estimation. The 3D Burn application, although slower, allowed more accurate TBSAB measurements when compared to conventional methods. The validation study has shown that the 3D Burn application is useful in improving the accuracy of TBSAB measurement. Further studies are warranted, and there are plans to repeat the above study in a different centre overseas as part of a multi-centre study, with a view of progressing to a prospective study that compares the accuracy of the 3D Burn application against conventional methods on actual burn patients.

Initial examination of fuel compacts and TRISO particles from the US AGR-2 irradiation test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunn, John D.; Baldwin, Charles A.; Montgomery, Fred C.

Post-irradiation examination was completed on two as-irradiated compacts from the US Advanced Gas Reactor Fuel Development and Qualification Program’s second irradiation test. These compacts were selected for examination because there were indications that they may have contained particles that released cesium through a failed or defective SiC layer. The coated particles were recovered from these compacts by electrolytic deconsolidation of the surrounding graphitic matrix in nitric acid. The leach-burn-leach (LBL) process was used to dissolve and analyze exposed metallic elements (actinides and fission products), and each particle was individually surveyed for relative cesium retention with the Irradiated Microsphere Gamma Analyzermore » (IMGA). Data from IMGA and LBL examinations provided information on fission product release during irradiation and whether any specific particles had below-average retention that could be related to coating layer defects or radiation-induced degradation. A few selected normal-retention particles and six with abnormally-low cesium inventory were analyzed using X-ray tomography to produce three-dimensional images of the internal coating structure. Four of the low-cesium particles had obviously damaged or degraded SiC, and X-ray imaging was able to guide subsequent grinding and polishing to expose the regions of interest for analysis by optical and electron microscopy. Additional particles from each compact were also sectioned and examined to study the overall radiation-induced microstructural changes in the kernel and coating layers.« less

Initial examination of fuel compacts and TRISO particles from the US AGR-2 irradiation test

DOE PAGES

Hunn, John D.; Baldwin, Charles A.; Montgomery, Fred C.; ...

2017-10-21

Post-irradiation examination was completed on two as-irradiated compacts from the US Advanced Gas Reactor Fuel Development and Qualification Program’s second irradiation test. These compacts were selected for examination because there were indications that they may have contained particles that released cesium through a failed or defective SiC layer. The coated particles were recovered from these compacts by electrolytic deconsolidation of the surrounding graphitic matrix in nitric acid. The leach-burn-leach (LBL) process was used to dissolve and analyze exposed metallic elements (actinides and fission products), and each particle was individually surveyed for relative cesium retention with the Irradiated Microsphere Gamma Analyzermore » (IMGA). Data from IMGA and LBL examinations provided information on fission product release during irradiation and whether any specific particles had below-average retention that could be related to coating layer defects or radiation-induced degradation. A few selected normal-retention particles and six with abnormally-low cesium inventory were analyzed using X-ray tomography to produce three-dimensional images of the internal coating structure. Four of the low-cesium particles had obviously damaged or degraded SiC, and X-ray imaging was able to guide subsequent grinding and polishing to expose the regions of interest for analysis by optical and electron microscopy. Additional particles from each compact were also sectioned and examined to study the overall radiation-induced microstructural changes in the kernel and coating layers.« less

Evaluation of Mass Filtered, Time Dilated, Time-of-Flight Mass Spectrometry

DTIC Science & Technology

2010-01-01

Figure 4.4: Mass resolution dependence on field for selected actinides and surrogates...45 Figure 4.7: Mass resolution dependence on field for selected actinides and actinide surrogates, modeled with no initial...system. A somewhat better mass resolution would need to be achieved in order to separate hydride molecules in the actinide region. However, the

Exploring actinide materials through synchrotron radiation techniques.

PubMed

Shi, Wei-Qun; Yuan, Li-Yong; Wang, Cong-Zhi; Wang, Lin; Mei, Lei; Xiao, Cheng-Liang; Zhang, Li; Li, Zi-Jie; Zhao, Yu-Liang; Chai, Zhi-Fang

2014-12-10

Synchrotron radiation (SR) based techniques have been utilized with increasing frequency in the past decade to explore the brilliant and challenging sciences of actinide-based materials. This trend is partially driven by the basic needs for multi-scale actinide speciation and bonding information and also the realistic needs for nuclear energy research. In this review, recent research progresses on actinide related materials by means of various SR techniques were selectively highlighted and summarized, with the emphasis on X-ray absorption spectroscopy, X-ray diffraction and scattering spectroscopy, which are powerful tools to characterize actinide materials. In addition, advanced SR techniques for exploring future advanced nuclear fuel cycles dealing with actinides are illustrated as well. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Separation of actinides from lanthanides utilizing molten salt electrorefining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grimmett, D.L.; Fusselman, S.P.; Roy, J.J.

1996-10-01

TRUMP-S (TRansUranic Management through Pyropartitioning Separation) is a pyrochemical process being developed to separate actinides form fission products in nuclear waste. A key process step involving molten salt electrorefining to separate actinides from lanthanides has been studied on a laboratory scale. Electrorefining of U, Np, Pu, Am, and lanthanide mixtures from molten cadmium at 450 C to a solid cathode utilizing a molten chloride electrolyte resulted in > 99% removal of actinides from the molten cadmium and salt phases. Removal of the last few percent of actinides is accompanied by lowered cathodic current efficiency and some lanthanide codeposition. Actinide/lanthanide separationmore » ratios on the cathode are ordered U > Np > Pu > Am and are consistent with predictions based on equilibrium potentials.« less

Burns in a major burns center in East China from 2005 to 2014: Incidence and outcome.

PubMed

Fan, Xiaoming; Ma, Bing; Zeng, Ding; Fang, Xiao; Li, Haihang; Xiao, Shichu; Wang, Guangyi; Tang, Hongtai; Xia, Zhaofan

2017-11-01

Information about epidemiology on burns is rare in China. The aim of this article is to describe the pattern of burns in East China during a 10-year time period. A retrospective data analysis was performed on all hospitalized patients to the burn center at the Changhai hospital, one of major burn centers in East China, from 2005 to 2014. We included 3376 patients in this study. Among them, 48.1% were from 27 provinces out of Shanghai and nearly 90% were from East China. August saw the most admissions and November saw the fewest. Spring and summer separately dominated in number of female and male patients. Children aged 2-5 and working-age adult were the most commonly treated. Home was the commonest place of injury, followed by industrial-related places, outdoors, public buildings, and vehicles or roads. Scalds remained the primary reason, followed by fire, contact burns, electricity, and chemicals. The average %TBSA of male patients was 14.2±21.3, significantly different from that of female patients (10.4±16.9). Extremities were the most vulnerable body region burned, followed by the trunk, face and hands. The average hospital length of stay in male patients was 25.4±72.4 days, significantly different from that of females' 19.9±27.6 days. The total mortality was 1.8% and the lethal area burned resulting in 50% mortality was 96.5% TBSA. Compared with published data, these result are encouraging, which demonstrate that burn care and treatment has made significant progress. Burn clinicians should bear not only the responsibility to treat and cure burns, but also the popularization of knowledge about burn precautions and emergency treatments. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Extraction chromatographic separation of Am(III) and Eu(III) by TPEN-immobilized gel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeshita, K.; Ogata, T.; Oaki, H.

2013-07-01

A TPEN derivative with 4 vinyl groups, N,N,N',N' -tetrakis-(4-propenyloxy-2-pyridylmethyl)ethylenediamine (TPPEN) was synthesized for the separation of trivalent minor actinides (Am(III)) and lanthanides (Eu(III)). A co-polymer gel with TPPEN and N-isopropylacrylamide (NIPA) showed a high separation factor of Am(III) over Eu(III) (SF[Am/Eu]), which was evaluated to be 26 at pH=5. Thin film of NIPA-TPPEN gel (average thickness: 2-40 nm) was immobilized on the pore surface in porous silica particles (particle diameter : 50 μm, average pore diameter : 50 and 300 nm) and a chromatographic column (diameter: 6 mm, height: 11 mm) packed with the gel-coated particles was prepared. A smallmore » amount of weakly acidic solution (pH=4) containing Am(III) and Eu(III) was supplied in the column and the elution tests of Am(III) and Eu(III) were carried out. Eu(III) was recovered separately by a weakly acidic eluent (pH=4) at 313 K and Am(III) by a highly acidic eluent (pH=2) at 298 K. These results suggest that the contentious separation of minor actinides and lanthanides is attainable by a new extraction chromatographic process with two columns adjusted to 298 K and 313 K. (authors)« less

Femoral venous access is safe in burned children: an analysis of 224 catheters.

PubMed

Goldstein, A M; Weber, J M; Sheridan, R L

1997-03-01

To document the incidence of septic and mechanical complications associated with femoral venous catheters in a subgroup of patients thought to be at particularly high risk of both: young children with large burns. An analysis of data collected prospectively on all femoral venous catheters placed during a 4-year period at a regional pediatric burn facility. There were 224 femoral catheters placed in 86 children with an average age of 5.3 +/- 5.1 years and an average burn size of 38% +/- 23%. Catheters were left in place for a mean duration of 5.7 days. Catheter-related sepsis occurred with 4.9% of the catheters, and mechanical complications occurred in 3.5% of the patients. There was no statistically significant association between the risk of catheter sepsis and the placement of catheters through burned versus unburned skin. Similarly, the risk of sepsis was equivalent between lines placed over a guide wire and those placed of a new site. Femoral venous catheters are safe in burned children and are associated with a low incidence of infectious and mechanical complications.

RECOVERY OF ACTINIDES FROM AQUEOUS NITRIC ACID SOLUTIONS

DOEpatents

Ader, M.

1963-11-19

A process of recovering actinides is presented. Tetravalent actinides are extracted from rare earths in an aqueous nitric acid solution with a ketone and back-extracted from the ketone into an aqueous medium. The aqueous actinide solution thus obtained, prior to concentration by boiling, is sparged with steam to reduce its ketone to a maximum content of 3 grams per liter. (AEC)

Effects of exotic grasses on soil seed banks in Southeastern Arizona grasslands

USGS Publications Warehouse

McLaughlin, S.P.; Bowers, Janice E.

2007-01-01

At the Appleton-Whittell Research Ranch, an ungrazed grassland preserve in southeastern Arizona, soil seed banks were sampled in June, August, and October 2002 and June 2003. Wildfire had previously burned 90% of the research ranch in May 2002. Seed density and species richness in burned native grassland (2 plots) were compared to those in burned exotic grassland (2 plots). Averaged over 4 sample dates, seed densities were as follows: burned native grassland, 591 ?? 243.1 seeds??m-2 and 784 ?? 334.9 seeds??m-2; burned exotic grassland, 501 ?? 198.9 seeds??m-2 and 196 ?? 123.8 seeds??m-2. Species richness in the seed bank, also averaged over 4 sample dates, was as follows: burned native grassland, 16.3 ?? 1.7 species??m -2 and 19.5 ?? 1.0 species??m-2; burned exotic grassland, 12.0 ?? 3.4 species??m-2 and 11.06 ?? 2.5 species??m-2. The seed bank of burned exotic grassland contained significantly fewer seeds and species than that of burned native grassland. In addition, the seed bank in burned exotic grassland comprised mainly exotic grasses, whereas annual and perennial herbs, most of them native, dominated the seed bank of burned native grassland. Of the 50 species detected in soil samples, only 20 had a persistent seed bank, and only 1 of these was a native perennial bunchgrass. The preponderance of transient species means that eradication of exotic grasses must be followed by reseeding of native grasses and herbs, perhaps repeatedly, if native grassland is to replace exotic grassland.

Home remedy or hazard?: management and costs of paediatric steam inhalation therapy burn injuries.

PubMed

Al Himdani, Sarah; Javed, Muhammad Umair; Hughes, Juliana; Falconer, Olivia; Bidder, Christopher; Hemington-Gorse, Sarah; Nguyen, Dai

2016-03-01

Steam inhalation has long been considered a beneficial home remedy to treat children with viral respiratory tract infections, but there is no evidence to suggest a benefit and children are at risk of serious burn injuries. To determine the demographics, mechanism, management, and costs of steam inhalation therapy scalds to a regional burns centre in the UK, and to ascertain whether this practice is recommended by primary care providers. A retrospective study of all patients admitted to a regional burns centre in Swansea, Wales, with steam inhalation therapy scalds. Patients who attended the burns centre for steam inhalation therapy scalds between January 2010 and February 2015 were identified using the burns database and data on patient demographics, treatment, and costs incurred were recorded. In addition, an electronic survey was e-mailed to 150 local GPs to determine whether they recommended steam inhalation therapy to patients. Sixteen children attended the burns centre with steam inhalation scalds. The average age attending was 7.4 years (range 1-15 years) and, on average, three children per year were admitted. The most common indication was for the common cold (n = 9). The average size of the burns was 3.1% (range: 0.25-17.0%) of total body area. One child was managed surgically; the remainder were treated with dressings, although one patient required a stay in a high-dependency unit. The total cost of treatment for all patients was £37,133. All in all, 17 out of 21 GPs surveyed recommended steam inhalation to their patients; eight out of 19 GPs recommended it for children aged <5 years. Steam inhalation incurs a significant cost to patients and the healthcare system. Its practice continues to be recommended by GPs but children, due to their limited motor skills, curiosity, and poor awareness of danger, are at significant risk of burn injuries and this dangerous practice should no longer be recommended. © British Journal of General Practice 2016.

Home remedy or hazard? management and costs of paediatric steam inhalation therapy burn injuries

PubMed Central

Himdani, Sarah Al; Javed, Muhammad Umair; Hughes, Juliana; Falconer, Olivia; Bidder, Christopher; Hemington-Gorse, Sarah; Nguyen, Dai

2016-01-01

Background Steam inhalation has long been considered a beneficial home remedy to treat children with viral respiratory tract infections, but there is no evidence to suggest a benefit and children are at risk of serious burn injuries. Aim To determine the demographics, mechanism, management, and costs of steam inhalation therapy scalds to a regional burns centre in the UK, and to ascertain whether this practice is recommended by primary care providers. Design and setting A retrospective study of all patients admitted to a regional burns centre in Swansea, Wales, with steam inhalation therapy scalds. Method Patients who attended the burns centre for steam inhalation therapy scalds between January 2010 and February 2015 were identified using the burns database and data on patient demographics, treatment, and costs incurred were recorded. In addition, an electronic survey was e-mailed to 150 local GPs to determine whether they recommended steam inhalation therapy to patients. Results Sixteen children attended the burns centre with steam inhalation scalds. The average age attending was 7.4 years (range 1–15 years) and, on average, three children per year were admitted. The most common indication was for the common cold (n = 9). The average size of the burns was 3.1% (range: 0.25–17.0%) of total body area. One child was managed surgically; the remainder were treated with dressings, although one patient required a stay in a high-dependency unit. The total cost of treatment for all patients was £37 133. All in all, 17 out of 21 GPs surveyed recommended steam inhalation to their patients; eight out of 19 GPs recommended it for children aged <5 years. Conclusion Steam inhalation incurs a significant cost to patients and the healthcare system. Its practice continues to be recommended by GPs but children, due to their limited motor skills, curiosity, and poor awareness of danger, are at significant risk of burn injuries and this dangerous practice should no longer be recommended. PMID:26917659

Bidentate organophosphorus solvent extraction process for actinide recovery and partition

DOEpatents

Schulz, Wallace W.

1976-01-01

A liquid-liquid extraction process for the recovery and partitioning of actinide values from acidic nuclear waste aqueous solutions, the actinide values including trivalent, tetravalent and hexavalent oxidation states is provided and includes the steps of contacting the aqueous solution with a bidentate organophosphorous extractant to extract essentially all of the actinide values into the organic phase. Thereafter the respective actinide fractions are selectively partitioned into separate aqueous solutions by contact with dilute nitric or nitric-hydrofluoric acid solutions. The hexavalent uranium is finally removed from the organic phase by contact with a dilute sodium carbonate solution.

Impact of minor actinide recycling on sustainable fuel cycle options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidet, F.; Kim, T. K.; Taiwo, T. A.

The recent Evaluation and Screening study chartered by the U.S. Department of Energy, Office of Nuclear Energy, has identified four fuel cycle options as being the most promising. Among these four options, the two single-stage fuel cycles rely on a fast reactor and are differing in the fact that in one case only uranium and plutonium are recycled while in the other case minor actinides are also recycled. The two other fuel cycles are two-stage and rely on both fast and thermal reactors. They also differ in the fact that in one case only uranium and plutonium are recycled whilemore » in the other case minor actinides are also recycled. The current study assesses the impact of recycling minor actinides on the reactor core design, its performance characteristics, and the characteristics of the recycled material and waste material. The recycling of minor actinides is found not to affect the reactor core performance, as long as the same cycle length, core layout and specific power are being used. One notable difference is that the required transuranics (TRU) content is slightly increased when minor actinides are recycled. The mass flows are mostly unchanged given a same specific power and cycle length. Although the material mass flows and reactor performance characteristics are hardly affected by recycling minor actinides, some differences are observed in the waste characteristics between the two fuel cycles considered. The absence of minor actinides in the waste results in a different buildup of decay products, and in somewhat different behaviors depending on the characteristic and time frame considered. Recycling of minor actinides is found to result in a reduction of the waste characteristics ranging from 10% to 90%. These results are consistent with previous studies in this domain and depending on the time frame considered, packaging conditions, repository site, repository strategy, the differences observed in the waste characteristics could be beneficial and help improve the repository performance. On the other hand, recycling minor actinides also results in an increase of the recycled fuel characteristics and therefore of the charged fuel. The radioactivity is slightly increased while the decay heat and radiotoxicities are very significantly increased. Despite these differences, the characteristics of the fuel at time of discharge remain similar whether minor actinides are recycled or not, with the exception of the inhalation radiotoxicity which is significantly larger with minor actinide recycling. After some cooling the characteristics of the discharged fuel become larger when minor actinides are recycled, potentially affecting the reprocessing plant requirements. Recycling minor actinides has a negative impact on the characteristics of the fresh fuel and will make it more challenging to fabricate fuel containing minor actinides.« less

Biological markers of stress in pediatric acute burn injury.

PubMed

Brown, Nadia J; Kimble, Roy M; Rodger, Sylvia; Ware, Robert S; McWhinney, Brett C; Ungerer, Jacobus P J; Cuttle, Leila

2014-08-01

Burns and their associated wound care procedures evoke significant stress and anxiety, particularly for children. Little is known about the body's physiological stress reactions throughout the stages of re-epithelialization following an acute burn injury. Previously, serum and urinary cortisol have been used to measure stress in burn patients, however these measures are not suitable for a pediatric burn outpatient setting. To assess the sensitivity of salivary cortisol and sAA in detecting stress during acute burn wound care procedures and to investigate the body's physiological stress reactions throughout burn re-epithelialization. Seventy-seven participants aged four to thirteen years who presented with an acute burn injury to the burn center at the Royal Children's Hospital, Brisbane, Australia, were recruited between August 2011 and August 2012. Both biomarkers were responsive to the stress of burn wound care procedures. sAA levels were on average 50.2 U/ml higher (p<0.001) at 10 min post-dressing removal compared to baseline levels. Salivary cortisol levels showed a blunted effect with average levels at ten minutes post dressing removal decreasing by 0.54 nmol/L (p<0.001) compared to baseline levels. sAA levels were associated with pain (p=0.021), no medication (p=0.047) and Child Trauma Screening Questionnaire scores at three months post re-epithelialization (p=0.008). Similarly, salivary cortisol was associated with no medication (p<0.001), pain scores (p=0.045) and total body surface area of the burn (p=0.010). Factors which support the use of sAA over salivary cortisol to assess stress during morning acute burn wound care procedures include; sensitivity, morning clinic times relative to cortisol's diurnal peaks, and relative cost. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herman, D.

The Savannah River Site (SRS) Actinide Removal Process has been processing salt waste since 2008. This process includes a filtration step in the 512-S facility. Initial operations included the addition, or strike, of monosodium titanate (MST) to remove soluble actinides and strontium. The added MST and any entrained sludge solids were then separated from the supernate by cross flow filtration. During this time, the filter operations have, on many occasions, been the bottleneck process limiting the rate of salt processing. Recently, 512-S- has started operations utilizing “No-MST” where the MST actinide removal strike was not performed and the supernate wasmore » simply pre-filtered prior to Cs removal processing. Direct filtration of decanted tank supernate, as demonstrated in 512-S, is the proposed method of operation for the Hanford Low Activity Waste Pretreatment System (LAWPS) facility. Processing decanted supernate without MST solids has been demonstrated for cross flow filtration to provide a significant improvement in production with the SRS Salt Batches 8 and 9 feed chemistries. The average filtration rate for the first 512-S batch processing cycle using No-MST has increased filtrate production by over 35% of the historical average. The increase was sustained for more than double the amount of filtrate batches processed before cleaning of the filter was necessary. While there are differences in the design of the 512-S and Hanford filter systems, the 512-S system should provide a reasonable indication of LAWPS filter performance with similar feed properties. Based on the data from the 512-S facility and with favorable feed properties, the LAWPS filter, as currently sized at over twice the size of the 512-S filter (532 square feet filtration area versus 235 square feet), has the potential to provide sustained filtrate production at the upper range of the planned LAWPS production rate of 17 gpm.« less

Burns caused by flambé foods.

PubMed

Peters, W; Knighton, J

1993-01-01

From 1978 to 1990, five patients were admitted to the hospital for treatment of burns that were sustained during the preparation of flambé foods in restaurants. Three patients were patrons, and two were waiters. The average body surface area involved was 14% (range 10% to 18%). The average area of full-thickness burn was 3% (0% to 10%). All patrons required long-term psychologic support and were involved with lengthy and expensive litigation proceedings. The two waiters lost a total of 5 months from work. Although these injuries are quite rare, it is hoped that they can be totally prevented by adherence to certain safety guidelines.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindley, Benjamin A.; Parks, Geoffrey T.; Franceschini, Fausto

Multiple recycle of long-lived actinides has the potential to greatly reduce the required storage time for spent nuclear fuel or high level nuclear waste. This is generally thought to require fast reactors as most transuranic (TRU) isotopes have low fission probabilities in thermal reactors. Reduced-moderation LWRs are a potential alternative to fast reactors with reduced time to deployment as they are based on commercially mature LWR technology. Thorium (Th) fuel is neutronically advantageous for TRU multiple recycle in LWRs due to a large improvement in the void coefficient. If Th fuel is used in reduced-moderation LWRs, it appears neutronically feasiblemore » to achieve full actinide recycle while burning an external supply of TRU, with related potential improvements in waste management and fuel utilization. In this paper, the fuel cycle of TRU-bearing Th fuel is analysed for reduced-moderation PWRs and BWRs (RMPWRs and RBWRs). RMPWRs have the advantage of relatively rapid implementation and intrinsically low conversion ratios. However, it is challenging to simultaneously satisfy operational and fuel cycle constraints. An RBWR may potentially take longer to implement than an RMPWR due to more extensive changes from current BWR technology. However, the harder neutron spectrum can lead to favourable fuel cycle performance. A two-stage fuel cycle, where the first pass is Th-Pu MOX, is a technically reasonable implementation of either concept. The first stage of the fuel cycle can therefore be implemented at relatively low cost as a Pu disposal option, with a further policy option of full recycle in the medium term. (authors)« less

Promises and Challenges of Thorium Implementation for Transuranic Transmutation - 13550

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franceschini, F.; Lahoda, E.; Wenner, M.

2013-07-01

This paper focuses on the challenges of implementing a thorium fuel cycle for recycle and transmutation of long-lived actinide components from used nuclear fuel. A multi-stage reactor system is proposed; the first stage consists of current UO{sub 2} once-through LWRs supplying transuranic isotopes that are continuously recycled and burned in second stage reactors in either a uranium (U) or thorium (Th) carrier. The second stage reactors considered for the analysis are Reduced Moderation Pressurized Water Reactors (RMPWRs), reconfigured from current PWR core designs, and Fast Reactors (FRs) with a burner core design. While both RMPWRs and FRs can in principlemore » be employed, each reactor and associated technology has pros and cons. FRs have unmatched flexibility and transmutation efficiency. RMPWRs have higher fuel manufacturing and reprocessing requirements, but may represent a cheaper solution and the opportunity for a shorter time to licensing and deployment. All options require substantial developments in manufacturing, due to the high radiation field, and reprocessing, due to the very high actinide recovery ratio to elicit the claimed radiotoxicity reduction. Th reduces the number of transmutation reactors, and is required to enable a viable RMPWR design, but presents additional challenges on manufacturing and reprocessing. The tradeoff between the various options does not make the choice obvious. Moreover, without an overarching supporting policy in place, the costly and challenging technologies required inherently discourage industrialization of any transmutation scheme, regardless of the adoption of U or Th. (authors)« less

The direct hospitalization cost of care for acute burns in Lagos, Nigeria: a one-year prospective study

PubMed Central

Ahachi, C.N.; Fadeyibi, I.O.; Abikoye, F.O.; Chira, M.K.; Ugburo, A.O.; Ademiluyi, S.A.

2011-01-01

Summary Objective. We conducted a prospective study to identify the direct hospitalization cost of managing major acute burns in Lagos, Nigeria, and to determine the factors that influence the cost. Method. All consecutive and consenting patients seen and managed for major burns at the National Orthopaedic Hospital, Igbobi, Lagos, between 1 June 2007 and 31 May 2008 were recruited for the study. A special form designed for the study was used to collect the necessary data. Results. Fifty-two patients were seen during the study period (27 males and 25 females). The ages ranged from 2 months to 69 yr with a mean of 25.4 ± 17.1 yr. The length of hospital stay ranged from 0.3-12 months (mean, 3.2 ± 3.1 months). The average daily cost of treating a patient was ₦ (naira) 8,855 (₦1000 = €4.44) and the average overall cost was ₦209,303.70, with the costs of wound dressings, hospital admission, and surgery constituting respectively 29.5%, 25.7%, and 19.1% of the total amount spent. Conclusion. The length of hospital stay was prolonged in many patients and management methods should be reviewed to reduce this. The cost of managing burns is prohibitive for an average Nigerian. Efforts should be intensified to prevent burn injury and a Special Health Insurance policy should be established to finance burns management. PMID:22262967

Harvesting morels after wildfire in Alaska.

Treesearch

Tricia L. Wurtz; Amy L. Wiita; Nancy S. Weber; David Pilz

2005-01-01

Morels are edible, choice wild mushrooms that sometimes fruit prolifically in the years immediately after an area has been burned by wildfire. Wildfires are common in interior Alaska; an average of 708,700 acres burned each year in interior Alaska between 1961 and 2000, and in major fire years, over 2 million acres burned. We discuss Alaska's boreal forest...

Crystal growth methods dedicated to low solubility actinide oxalates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tamain, C., E-mail: christelle.tamain@cea.fr; Arab-Chapelet, B.; Rivenet, M.

Two novel crystal growth syntheses dedicated to low solubility actinide-oxalate systems and adapted to glove box handling are described. These methods based on the use of precursors of either actinide metal or oxalic acid have been optimized on lanthanide systems (analogue of actinides(III)) and then assessed on real actinide systems. They allow the synthesis of several actinide oxalate single crystals, Am{sub 2}(C{sub 2}O{sub 4}){sub 3}(H{sub 2}O){sub 3}·xH{sub 2}O, Th(C{sub 2}O{sub 4}){sub 2}·6H{sub 2}O, M{sub 2+x}[Pu{sup IV}{sub 2−x}Pu{sup III}{sub x}(C{sub 2}O{sub 4}){sub 5}]·nH{sub 2}O and M{sub 1−x}[Pu{sup III}{sub 1−x}Pu{sup IV}{sub x}(C{sub 2}O{sub 4}){sub 2}·H{sub 2}O]·nH{sub 2}O. It is the first timemore » that these well-known compounds are formed by crystal growth methods, thus enabling direct structural studies on transuranic element systems and acquisition of basic data beyond deductions from isomorphic (or not) lanthanide compounds. Characterizations by X-ray diffraction, UV–visible solid spectroscopy, demonstrate the potentialities of these two crystal growth methods to obtain oxalate compounds. - Graphical abstract: Two new single crystal growth methods dedicated to actinide oxalate compounds. - Highlights: • Use of diester as oxalate precursor for crystal growth of actinide oxalates. • Use of actinide oxide as precursor for crystal growth of actinide oxalates. • Crystal growth of Pu(III) and Am(III) oxalates. • Crystal growth of mixed Pu(III)/Pu(IV) oxalates.« less

Actinide ion sensor for pyroprocess monitoring

DOEpatents

Jue, Jan-fong; Li, Shelly X.

2014-06-03

An apparatus for real-time, in-situ monitoring of actinide ion concentrations which comprises a working electrode, a reference electrode, a container, a working electrolyte, a separator, a reference electrolyte, and a voltmeter. The container holds the working electrolyte. The voltmeter is electrically connected to the working electrode and the reference electrode and measures the voltage between those electrodes. The working electrode contacts the working electrolyte. The working electrolyte comprises an actinide ion of interest. The reference electrode contacts the reference electrolyte. The reference electrolyte is separated from the working electrolyte by the separator. The separator contacts both the working electrolyte and the reference electrolyte. The separator is ionically conductive to the actinide ion of interest. The reference electrolyte comprises a known concentration of the actinide ion of interest. The separator comprises a beta double prime alumina exchanged with the actinide ion of interest.

Actinide/beryllium neutron sources with reduced dispersion characteristics

DOEpatents

Schulte, Louis D.

2012-08-14

Neutron source comprising a composite, said composite comprising crystals comprising BeO and AmBe.sub.13, and an excess of beryllium, wherein the crystals have an average size of less than 2 microns; the size distribution of the crystals is less than 2 microns; and the beryllium is present in a 7-fold to a 75-fold excess by weight of the amount of AmBe.sub.13; and methods of making thereof.

Comparison of AVIRIS and Landsat ETM+ detection capabilities for burn severity

USGS Publications Warehouse

Van Wagtendonk, Jan W.; Root, Ralph R.; Key, Carl H.

2004-01-01

Our study compares data on burn severity collected from multi-temporal Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) with similar data from the Enhanced Thematic Mapper Plus (ETM+) using the differenced Normalized Burn Ratio (dNBR). Two AVIRIS and ETM+ data acquisitions recorded surface conditions immediately before the Hoover Fire began to spread rapidly and again the following year. Data were validated with 63 field plots using the Composite Burn Index (CBI). The relationship between spectral channels and burn severity was examined by comparing pre- and post-fire datasets. Based on the high burn severity comparison, AVIRIS channels 47 and 60 at wavelengths of 788 and 913 nm showed the greatest negative response to fire. Post-fire reflectance values decreased the most on average at those wavelengths, while channel 210 at 2370 nm showed the greatest positive response on average. Fire increased reflectance the most at that wavelength over the entire measured spectral range. Furthermore, channel 210 at 2370 nm exhibited the greatest variation in spectral response, suggesting potentially high information content for fire severity. Based on general remote sensing principles and the logic of variable spectral responses to fire, dNBR from both sensors should produce useful results in quantifying burn severity. The results verify the band–response relationships to burn severity as seen with ETM+ data and confirm the relationships by way of a distinctly different sensor system.

Impact of Including Higher Actinides in Fast Reactor Transmutation Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

B. Forget; M. Asgari; R. Ferrer

2007-09-01

Previous fast reactor transmutation studies generally disregarded higher mass minor actinides beyond Cm-246 due to various considerations including deficiencies in nuclear cross-section data. Although omission of these higher mass actinides does not significantly impact the neutronic calculations and fuel cycle performance parameters follow-on neutron dose calculations related to fuel recycling, transportation and handling are significantly impacted. This report shows that including the minor actinides in the equilibrium fast reactor calculations will increase the predicted neutron emission by about 30%. In addition a sensitivity study was initiated by comparing the impact of different cross-section evaluation file for representing these minor actinides.

Method for fluorination of actinide fluorides and oxyfluorides using O/sub 2/F/sub 2/

DOEpatents

Eller, P.G.; Malm, J.G.; Penneman, R.A.

1984-08-01

The present invention relates generally to methods of fluorination and more particularly to the use of O/sub 2/F/sub 2/ for the preparation of actinide hexafluorides, and for the extraction of deposited actinides and fluorides and oxyfluorides thereof from reaction vessels. The experiments set forth hereinabove demonstrate that the room temperature or below use of O/sub 2/F/sub 2/ will be highly beneficial for the preparation of pure actinide hexafluorides from their respective tetrafluorides without traces of HF being present as occurs using other fluorinating agents: and decontamination of equipment previously exposed to actinides: e.g., walls, feed lines, etc.

Actinides-1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Abstracts of 134 papers which were presented at the Actinides-1981 conference are presented. Approximately half of these papers deal with electronic structure of the actinides. Others deal with solid state chemistry, nuclear physic, thermodynamic properties, solution chemistry, and applied chemistry.

Nonaqueous method for dissolving lanthanide and actinide metals

DOEpatents

Crisler, L.R.

1975-11-11

Lanthanide and actinide beta-diketonate complex molecular compounds are produced by reacting a beta-diketone compound with a lanthanide or actinide element in the elemental metallic state in a mixture of carbon tetrachloride and methanol.

Enrichment of Thorium (Th) and Lead (Pb) in the early Galaxy

NASA Astrophysics Data System (ADS)

Aoki, Wako; Honda, Satoshi

2010-03-01

We have been determining abundances of Th, Pb and other neutron-capture elements in metal-deficient cool giant stars to constrain the enrichment of heavy elements by the r- and s-processes. Our current sample covers the metallicity range between [Fe/H] = -2.5 and -1.0. (1) The abundance ratios of Pb/Fe and Pb/Eu of most of our stars are approximately constant, and no increase of these ratios with increasing metallicity is found. This result suggests that the Pb abundances of our sample are determined by the r-process with no or little contribution of the s-process. (2) The Th/Eu abundance ratios of our sample show no significant scatter, and the average is lower by 0.2 dex in the logarithmic scale than the solar-system value. This result indicates that the actinides production by the r-process does not show large dispersion, even though r-process models suggest high sensitivity of the actinides production to the nucleosynthesis environment.

Dissolution of Used Nuclear Fuel Using a TBP/N-Paraffin Solvent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rudisill, T. S.; Shehee, T. C.; Jones, D. H.

2017-10-02

The dissolution of unirradiated used nuclear fuel (UNF) pellets pretreated for tritium removal was demonstrated using a tributly phosphate (TBP) solvent. Dissolution of pretreated fuel in TBP could potentially combine dissolution with two cycle of solvent extraction required for separating the actinides and lanthanides from other fission products. Dissolutions were performed using UNF surrogates prepared from both uranyl nitrate and uranium trioxide produced from the pretreatment process by adding selected actinide and stable fission product elements. In laboratory-scale experiments, the U dissolution efficiency ranged from 80-99+% for both the nitrate and oxide surrogate fuels. On average, 80% of the Pumore » and 50% of the Np and Am in the nitrate surrogate dissolved; however, little of the transuranic elements dissolved in the oxide form. The majority of the 3+ lanthanide elements dissolved. Only small amounts of Sr (0-1.6%) and Mo (0.1-1.7%) and essentially no Cs, Ru, Zr, or Pd dissolved.« less

Analysis of the Gas Core Actinide Transmutation Reactor (GCATR)

NASA Technical Reports Server (NTRS)

Clement, J. D.; Rust, J. H.

1977-01-01

Design power plant studies were carried out for two applications of the plasma core reactor: (1) As a breeder reactor, (2) As a reactor able to transmute actinides effectively. In addition to the above applications the reactor produced electrical power with a high efficiency. A reactor subsystem was designed for each of the two applications. For the breeder reactor, neutronics calculations were carried out for a U-233 plasma core with a molten salt breeding blanket. A reactor was designed with a low critical mass (less than a few hundred kilograms U-233) and a breeding ratio of 1.01. The plasma core actinide transmutation reactor was designed to transmute the nuclear waste from conventional LWR's. The spent fuel is reprocessed during which 100% of Np, Am, Cm, and higher actinides are separated from the other components. These actinides are then manufactured as oxides into zirconium clad fuel rods and charged as fuel assemblies in the reflector region of the plasma core actinide transmutation reactor. In the equilibrium cycle, about 7% of the actinides are directly fissioned away, while about 31% are removed by reprocessing.

Study on the leaching behavior of actinides from nuclear fuel debris

NASA Astrophysics Data System (ADS)

Kirishima, Akira; Hirano, Masahiko; Akiyama, Daisuke; Sasaki, Takayuki; Sato, Nobuaki

2018-04-01

For the prediction of the leaching behavior of actinides contained in the nuclear fuel debris generated by the Fukushima Daiichi nuclear power plant accident in Japan, simulated fuel debris consisting of a UO2-ZrO2 solid solution doped with 137Cs, 237Np, 236Pu, and 241Am tracers was synthesized and investigated. The synthesis of the debris was carried out by heat treatment at 1200 °C at different oxygen partial pressures, and the samples were subsequently used for leaching tests with Milli-Q water and seawater. The results of the leaching tests indicate that the leaching of actinides depends on the redox conditions under which the debris was generated; for example, debris generated under oxidative conditions releases more actinide nuclides to water than that generated under reductive conditions. Furthermore, we found that, as Zr(IV) increasingly substituted U(IV) in the fluorite crystal structure of the debris, the actinide leaching from the debris decreased. In addition, we found that seawater leached more actinides from the debris than pure water, which seems to be caused by the complexation of actinides by carbonate ions in seawater.

Protactinium and the intersection of actinide and transition metal chemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Richard E.; De Sio, Stephanie; Vallet, Valérie

The role of the 5f and 6d orbitals in the chemistry of the actinide elements has been of considerable interest since their discovery and synthesis. Relativistic effects cause the energetics of the 5f and 6d orbitals to change as the actinide series is traversed left to right imparting a rich and complex chemistry. The 5f and 6d atomic states cross in energy at protactinium (Pa), making it a potential intersection between transition metal and actinide chemistries. Herein, we report the synthesis of a Pa-peroxo cluster, A(6)(Pa4O(O-2)(6)F-12) [A = Rb, Cs, (CH3)(4)N], formed in pursuit of an actinide polyoxometalate. Quantum chemicalmore » calculations at the density functional theory level demonstrate equal 5f and 6d orbital participation in the chemistry of Pa and increasing 5f orbital participation for the heavier actinides. Periodic changes in orbital character to the bonding in the early actinides highlights the influence of the 5f orbitals in their reactivity and chemical structure.« less

Development of the life impact burn recovery evaluation (LIBRE) profile: assessing burn survivors' social participation.

PubMed

Kazis, Lewis E; Marino, Molly; Ni, Pengsheng; Soley Bori, Marina; Amaya, Flor; Dore, Emily; Ryan, Colleen M; Schneider, Jeff C; Shie, Vivian; Acton, Amy; Jette, Alan M

2017-10-01

Measuring the impact burn injuries have on social participation is integral to understanding and improving survivors' quality of life, yet there are no existing instruments that comprehensively measure the social participation of burn survivors. This project aimed to develop the Life Impact Burn Recovery Evaluation Profile (LIBRE), a patient-reported multidimensional assessment for understanding the social participation after burn injuries. 192 questions representing multiple social participation areas were administered to a convenience sample of 601 burn survivors. Exploratory factor analysis and confirmatory factor analysis (CFA) were used to identify the underlying structure of the data. Using item response theory methods, a Graded Response Model was applied for each identified sub-domain. The resultant multidimensional LIBRE Profile can be administered via Computerized Adaptive Testing (CAT) or fixed short forms. The study sample included 54.7% women with a mean age of 44.6 (SD 15.9) years. The average time since burn injury was 15.4 years (0-74 years) and the average total body surface area burned was 40% (1-97%). The CFA indicated acceptable fit statistics (CFI range 0.913-0.977, TLI range 0.904-0.974, RMSEA range 0.06-0.096). The six unidimensional scales were named: relationships with family and friends, social interactions, social activities, work and employment, romantic relationships, and sexual relationships. The marginal reliability of the full item bank and CATs ranged from 0.84 to 0.93, with ceiling effects less than 15% for all scales. The LIBRE Profile is a promising new measure of social participation following a burn injury that enables burn survivors and their care providers to measure social participation.

Periorbital burns – a 6 year review of management and outcome.

PubMed

Fitzgerald O'Connor, Edmund; Frew, Q; Din, A; Pleat, J; Ashraff, S; Ghazi-Nouri, S; El-Muttardi, N; Philp, B; Dziewulski, P

2015-05-01

Periorbital burns are an infrequent but potentially devastating injury. This study aimed to elucidate the spectrum of such injuries presenting to a UK burns centre and the outcome achieved in the cases requiring periorbital reconstruction for the restoration of function and form. Patients admitted to a UK regional burns centre between January 2005 and January 2011 with periorbital burns were identified from the Patient Administration System (PAS), theatre logs and the International Burns Injury database (IBID). Multiple parameters were assessed using patient notes, ITU and hospital image databases. Over 6 years, 167 patients with facial burns requiring surgery were treated, including 103 patients with eyelid burns. The mean burn size was 33% total body surface area. The eyelid burn depth varied; 67% superficial partial thickness, 17% deep dermal and 16% full thickness. Two patients lost complete vision in one eye, one patient underwent amniotic membrane grafting. In total 16 patients required periorbital reconstruction to maintain eye closure, with 1.8 operations on average per patient. Acute surgery was required in 11 patients, whilst late intervention (>3 months) was needed in 5, 2 patients had both acute and delayed surgery. Of the 5 late intervention patients 4 were treated with full thickness skin grafts and 1 with a Z plasty. Average time for final reconstruction with delayed surgery was 4.5 months. The goal in management of periorbital burns is preservation of vision, prevention of future complications and restoration of an acceptable aesthetic outcome. Total visual loss is thankfully rare, but early ophthalmology intervention is vital given the evidence of corneal damage as a brief therapeutic window exists. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Burns in mobile home fires--descriptive study at a regional burn center.

PubMed

Mullins, Robert F; Alarm, Badrul; Huq Mian, Mohammad Anwarul; Samples, Jancie M; Friedman, Bruce C; Shaver, Joseph R; Brandigi, Claus; Hassan, Zaheed

2009-01-01

Death from fires and burns are the sixth most common cause of unintentional injury death in the United States. More than (3/4) of burn deaths occurring in the United States are in the home. Mobile home fires carry twice the death rate as other dwellings. The aim of the study was to describe the characteristics of deaths and injuries in mobile home fire admitted in a regional Burn Center and to identify possible risk factors. A cross-sectional retrospective study was carried out among all burn patients admitted to a regional Burn Center between January 2002 and December 2004 (3469 patients). The study included patients who suffered a burn injury from a mobile home fire. The demographic characteristics of the patients, location of mobile home, associated inhalation injury, source of fire, comorbidity of the victims, employment status, insurance status, family history of burns, and outcomes of the treatment were incorporated in a data collection record. There were 65 burn patients in mobile home fires admitted to the Burn Center during the studied period. The average age of the patients was 39 years (ranging from 2 to 81 years, SD=16.06), 77% were male, 67% were white, and 79% were the residents in the suburban areas of Georgia, South Carolina, North Carolina, and Florida. The average TBSA of burns was about 21% (ranging from 1 to 63%, SD=17.66), 63% of the patients had associated inhalation, three inhalation injury only, and 69% patients required ventilator support. The average length of stay per TBSA percentage of burn was 1.01 days (P=0.00), controlling for age, preexisting medical comorbidities, and inhalation injury. About 88% of the patients had preexisting medical comorbid conditions, 74% were smokers, 64% reported as alcoholic, and 72% had at least some form of health insurance coverage. In 40% of the cases, the cause of the fire was unknown, 31% were caused by accidental explosions, such as electric, gasoline, or kerosene appliances, and 29% were due to other causes. About 40% of burns took place between December and February. Among the studied cohorts, 32% were unemployed, 15% were disabled, and 14% did not have any information about their employment status. One in every four patients had a family history of a burn. Eight (12%) died in the hospital during treatment. There was a higher prevalence of inhalation injury and higher case fatality among the burn patients in mobile home fires compared with the statistics of the Burn Center. Observation showed a higher number of smokers and alcoholics among the burn patients. The main sources of fire were from home appliances. Fewer people had health insurance coverage than the national standard and more people suffered from some sort of chronic illness compared with the national morbidity data.

Method for producing nuclear fuel

DOEpatents

Haas, Paul A.

1983-01-01

Nuclear fuel is made by contacting an aqueous solution containing an actinide salt with an aqueous solution containing ammonium hydroxide, ammonium oxalate, or oxalic acid in an amount that will react with a fraction of the actinide salt to form a precipitate consisting of the hydroxide or oxalate of the actinide. A slurry consisting of the precipitate and solution containing the unreacted actinide salt is formed into drops which are gelled, calcined, and pressed to form pellets.

Zirconium behaviour during electrorefining of actinide-zirconium alloy in molten LiCl-KCl on aluminium cathodes

NASA Astrophysics Data System (ADS)

Meier, R.; Souček, P.; Malmbeck, R.; Krachler, M.; Rodrigues, A.; Claux, B.; Glatz, J.-P.; Fanghänel, Th.

2016-04-01

A pyrochemical electrorefining process for the recovery of actinides from metallic nuclear fuel based on actinide-zirconium alloys (An-Zr) in a molten salt is being investigated. In this process actinides are group-selectively recovered on solid aluminium cathodes as An-Al alloys using a LiCl-KCl eutectic melt at a temperature of 450 °C. In the present study the electrochemical behaviour of zirconium during electrorefining was investigated. The maximum amount of actinides that can be oxidised without anodic co-dissolution of zirconium was determined at a selected constant cathodic current density. The experiment consisted of three steps to assess the different stages of the electrorefining process, each of which employing a fresh aluminium cathode. The results indicate that almost a complete dissolution of the actinides without co-dissolution of zirconium is possible under the applied experimental conditions.

Treatment of burning mouth syndrome with a low-level energy diode laser.

PubMed

Yang, Hui-Wen; Huang, Yu-Feng

2011-02-01

To test the therapeutic efficacy of low-level energy diode laser on burning mouth syndrome. Burning mouth syndrome is characterized by burning and painful sensations in the mouth, especially the tongue, in the absence of significant mucosal abnormalities. Although burning mouth syndrome is relatively common, little is known regarding its etiology and pathophysiology. As a result, no treatment is effective in all patients. Low-level energy diode laser therapy has been used in a variety of chronic and acute pain conditions, including neck, back and myofascial pain, degenerative osteoarthritis, and headache. A total of 17 patients who had been diagnosed with burning mouth syndrome were treated with an 800-nm wavelength diode laser. A straight handpiece was used with an end of 1-cm diameter with the fiber end standing 4 cm away from the end of handpiece. When the laser was applied, the handpiece directly contacted or was immediately above the symptomatic lingual surface. The output used was 3 W, 50 msec intermittent pulsing, and a frequency of 10 Hz, which was equivalent to an average power of 1.5 W/cm(2) (3 W × 0.05 msec × 10 Hz = 1.5 W/cm(2)). Depending on the involved area, laser was applied to a 1-cm(2) area for 70 sec until all involved area was covered. Overall pain and discomfort were analyzed with a 10-cm visual analogue scale. All patients received diode laser therapy between one and seven times. The average pain score before the treatment was 6.7 (ranging from 2.9 to 9.8). The results showed an average reduction in pain of 47.6% (ranging from 9.3% to 91.8%). The burning sensation remained unchanged for up to 12 months. Low-level energy diode laser may be an effective treatment for burning mouth syndrome.

Method for fluorination of actinide fluorides and oxyfluorides thereof using O.sub.2 F.sub.2

DOEpatents

Eller, Phillip G.; Malm, John G.; Penneman, Robert A.

1988-01-01

Method for fluorination of actinides and fluorides and oxyfluorides thereof using O.sub.2 F.sub.2 which generates actinide hexafluorides, and for removal of actinides and compounds thereof from surfaces upon which they appear as unwanted deposits. The fluorinating agent, O.sub.2 F.sub.2, has been observed to readily perform the above-described tasks at sufficiently low temperatures that there is virtually no damage to the containment vessels. Moreover, the resulting actinide hexafluorides are thereby not destroyed by high temperature reactions with the walls of the reaction vessel. Dioxygen difluoride is easily prepared, stored and transferred to the desired place of reaction.

Method for fluorination of actinide fluorides and oxyfluorides thereof using O[sub 2]F[sub 2

DOEpatents

Eller, P.G.; Malm, J.G.; Penneman, R.A.

1988-11-08

Method is described for fluorination of actinides and fluorides and oxyfluorides thereof using O[sub 2]F[sub 2] which generates actinide hexafluorides, and for removal of actinides and compounds thereof from surfaces upon which they appear as unwanted deposits. The fluorinating agent, O[sub 2]F[sub 2], has been observed to readily perform the above-described tasks at sufficiently low temperatures that there is virtually no damage to the containment vessels. Moreover, the resulting actinide hexafluorides are thereby not destroyed by high temperature reactions with the walls of the reaction vessel. Dioxygen difluoride is easily prepared, stored and transferred to the desired place of reaction.

Thermodynamic Properties of Actinides and Actinide Compounds

NASA Astrophysics Data System (ADS)

Konings, Rudy J. M.; Morss, Lester R.; Fuger, Jean

The necessity of obtaining accurate thermodynamic quantities for the actinide elements and their compounds was recognized at the outset of the Manhattan Project, when a dedicated team of scientists and engineers initiated the program to exploit nuclear energy for military purposes. Since the end of World War II, both fundamental and applied objectives have motivated a great deal of further study of actinide thermodynamics. This chapter brings together many research papers and critical reviews on this subject. It also seeks to assess, to systematize, and to predict important properties of the actinide elements, ions, and compounds, especially for species in which there is significant interest and for which there is an experimental basis for the prediction.

Separation of actinides using capillary extraction chromatography-inductively coupled plasma mass spectrometry.

PubMed

Peterson, Dominic S; Montoya, Velma M

2009-08-01

Trace levels of actinides have been separated on capillary extraction chromatography columns. Detection of the actinides was achieved using an inductively coupled plasma mass spectrometer, which was coupled with the extraction chromatography system. In this study, we compare 30-cm long, 4.6 mm i.d. columns to capillary columns (750 microm i.d.) with lengths from 30 cm up to 150 cm. The columns that were tested were packed with TRU resin. We were able to separate a mixture of five actinides ((232)Th, (238)U, (237)Np, (239)Pu, and (241)Am). This work has application to rapid bioassay as well as automated separations of actinide materials.

Actinide abundances in ordinary chondrites

USGS Publications Warehouse

Hagee, B.; Bernatowicz, T.J.; Podosek, F.A.; Johnson, M.L.; Burnett, D.S.; Tatsumoto, M.

1990-01-01

Measurements of 244Pu fission Xe, U, Th, and light REE (LREE) abundances, along with modal petrographic determinations of phosphate abundances, were carried out on equilibrated ordinary chondrites in order to define better the solar system Pu abundance and to determine the degree of variation of actinide and LREE abundances. Our data permit comparison of the directly measured Pu/ U ratio with that determined indirectly as (Pu/Nd) ?? (Nd/U) assuming that Pu behaves chemically as a LREE. Except for Guaren??a, and perhaps H chondrites in general, Pu concentrations are similar to that determined previously for St. Se??verin, although less precise because of higher trapped Xe contents. Trapped 130Xe 136Xe ratios appear to vary from meteorite to meteorite, but, relative to AVCC, all are similar in the sense of having less of the interstellar heavy Xe found in carbonaceous chondrite acid residues. The Pu/U and Pu/Nd ratios are consistent with previous data for St. Se??verin, but both tend to be slightly higher than those inferred from previous data on Angra dos Reis. Although significant variations exist, the distribution of our Th/U ratios, along with other precise isotope dilution data for ordinary chondrites, is rather symmetric about the CI chondrite value; however, actinide/(LREE) ratios are systematically lower than the CI value. Variations in actinide or LREE absolute and relative abundances are interpreted as reflecting differences in the proportions and/or compositions of more primitive components (chondrules and CAI materials?) incorporated into different regions of the ordinary chondrite parent bodies. The observed variations of Th/U, Nd/U, or Ce/U suggest that measurements of Pu/U on any single equilibrated ordinary chondrite specimen, such as St. Se??verin, should statistically be within ??20-30% of the average solar system value, although it is also clear that anomalous samples exist. ?? 1990.

Assessment of Metaborate Fusion for the Rapid Dissolution of Solid Samples: Suitability with the Northstar ARSIIe

DTIC Science & Technology

2016-07-01

goal of this project was to develop a rapid dissolution methodology for solid environmental samples and a crude pre- concentration of actinides ...environmental solid samples needed to be removed from the samples prior to actinide separation on the ARSIIe system. As a result of this project, two...procedures were developed, one applicable to the pre-concentration of the actinides only and a second for the pre-concentration of both actinides and

Method for the concentration and separation of actinides from biological and environmental samples

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1989-01-01

A method and apparatus for the quantitative recover of actinide values from biological and environmental sample by passing appropriately prepared samples in a mineral acid solution through a separation column of a dialkyl(phenyl)-N,N-dialylcarbamoylmethylphosphine oxide dissolved in tri-n-butyl phosphate on an inert substrate which selectively extracts the actinide values. The actinide values can be eluted either as a group or individually and their presence quantitatively detected by alpha counting.

Use of methylnaltrexone to induce laxation in acutely injured patients with burns and necrotizing soft-tissue infections.

PubMed

Hewitt, Kelly; Lin, Hsin; Faraklas, Iris; Morris, Stephen; Cochran, Amalia; Saffle, Jeffrey

2014-01-01

The routine use of high-dose opioids for analgesia in patients with acute burns and soft-tissue injuries often leads to the development of opioid-induced constipation. The opioid antagonist methylnaltrexone (MLTX) reverses narcotic-related ileus without affecting systemic pain treatment. The authors' burn center developed a bowel protocol that included administration of MLTX for relief of opioid-induced constipation after other methods failed. The authors performed a retrospective review of patients with acute burns or necrotizing soft-tissue infections, who had been given subcutaneous MLTX to induce laxation. All patients who received MLTX were included and all administrations of the drug were included in the analysis. The primary outcome examined was time to laxation from drug administration. Forty-eight patients received MLTX a total of 112 times. Six patients were admitted with soft-tissue injuries and the rest suffered burns with an average TBSA of 17%. The median patient age was 41 years and the majority (75%) were men. Administration of a single dose of MLTX resulted in laxation within 4 hours in 38% of cases, and within 24 hours in 68%. Patients given MLTX received an average of 174 mg morphine equivalents daily for pain control. MLTX was given after an average of 52 hours since the last bowel movement. As this experience has evolved, it has been incorporated into an organized bowel protocol, which includes MLTX administration after other laxatives have failed. MLTX is an effective laxation agent in patients with burn and soft-tissue injuries, who have failed conventional agents.

Large forest fires in Canada, 1959-1997

NASA Astrophysics Data System (ADS)

Stocks, B. J.; Mason, J. A.; Todd, J. B.; Bosch, E. M.; Wotton, B. M.; Amiro, B. D.; Flannigan, M. D.; Hirsch, K. G.; Logan, K. A.; Martell, D. L.; Skinner, W. R.

2002-01-01

A Large Fire Database (LFDB), which includes information on fire location, start date, final size, cause, and suppression action, has been developed for all fires larger than 200 ha in area for Canada for the 1959-1997 period. The LFDB represents only 3.1% of the total number of Canadian fires during this period, the remaining 96.9% of fires being suppressed while <200 ha in size, yet accounts for ˜97% of the total area burned, allowing a spatial and temporal analysis of recent Canadian landscape-scale fire impacts. On average ˜2 million ha burned annually in these large fires, although more than 7 million ha burned in some years. Ecozones in the boreal and taiga regions experienced the greatest areas burned, with an average of 0.7% of the forested land burning annually. Lightning fires predominate in northern Canada, accounting for 80% of the total LFDB area burned. Large fires, although small in number, contribute substantially to area burned, most particularly in the boreal and taiga regions. The Canadian fire season runs from late April through August, with most of the area burned occurring in June and July due primarily to lightning fire activity in northern Canada. Close to 50% of the area burned in Canada is the result of fires that are not actioned due to their remote location, low values-at-risk, and efforts to accommodate the natural role of fire in these ecosystems. The LFDB is updated annually and is being expanded back in time to permit a more thorough analysis of long-term trends in Canadian fire activity.

Large forest fires in Canada, 1959-1997

NASA Astrophysics Data System (ADS)

Stocks, B. J.; Mason, J. A.; Todd, J. B.; Bosch, E. M.; Wotton, B. M.; Amiro, B. D.; Flannigan, M. D.; Hirsch, K. G.; Logan, K. A.; Martell, D. L.; Skinner, W. R.

2003-01-01

A Large Fire Database (LFDB), which includes information on fire location, start date, final size, cause, and suppression action, has been developed for all fires larger than 200 ha in area for Canada for the 1959-1997 period. The LFDB represents only 3.1% of the total number of Canadian fires during this period, the remaining 96.9% of fires being suppressed while <200 ha in size, yet accounts for ~97% of the total area burned, allowing a spatial and temporal analysis of recent Canadian landscape-scale fire impacts. On average ~2 million ha burned annually in these large fires, although more than 7 million ha burned in some years. Ecozones in the boreal and taiga regions experienced the greatest areas burned, with an average of 0.7% of the forested land burning annually. Lightning fires predominate in northern Canada, accounting for 80% of the total LFDB area burned. Large fires, although small in number, contribute substantially to area burned, most particularly in the boreal and taiga regions. The Canadian fire season runs from late April through August, with most of the area burned occurring in June and July due primarily to lightning fire activity in northern Canada. Close to 50% of the area burned in Canada is the result of fires that are not actioned due to their remote location, low values-at-risk, and efforts to accommodate the natural role of fire in these ecosystems. The LFDB is updated annually and is being expanded back in time to permit a more thorough analysis of long-term trends in Canadian fire activity.

Global combustion: the connection between fossil fuel and biomass burning emissions (1997-2010).

PubMed

Balch, Jennifer K; Nagy, R Chelsea; Archibald, Sally; Bowman, David M J S; Moritz, Max A; Roos, Christopher I; Scott, Andrew C; Williamson, Grant J

2016-06-05

Humans use combustion for heating and cooking, managing lands, and, more recently, for fuelling the industrial economy. As a shift to fossil-fuel-based energy occurs, we expect that anthropogenic biomass burning in open landscapes will decline as it becomes less fundamental to energy acquisition and livelihoods. Using global data on both fossil fuel and biomass burning emissions, we tested this relationship over a 14 year period (1997-2010). The global average annual carbon emissions from biomass burning during this time were 2.2 Pg C per year (±0.3 s.d.), approximately one-third of fossil fuel emissions over the same period (7.3 Pg C, ±0.8 s.d.). There was a significant inverse relationship between average annual fossil fuel and biomass burning emissions. Fossil fuel emissions explained 8% of the variation in biomass burning emissions at a global scale, but this varied substantially by land cover. For example, fossil fuel burning explained 31% of the variation in biomass burning in woody savannas, but was a non-significant predictor for evergreen needleleaf forests. In the land covers most dominated by human use, croplands and urban areas, fossil fuel emissions were more than 30- and 500-fold greater than biomass burning emissions. This relationship suggests that combustion practices may be shifting from open landscape burning to contained combustion for industrial purposes, and highlights the need to take into account how humans appropriate combustion in global modelling of contemporary fire. Industrialized combustion is not only an important driver of atmospheric change, but also an important driver of landscape change through companion declines in human-started fires.This article is part of the themed issue 'The interaction of fire and mankind'. © 2016 The Author(s).

Global combustion: the connection between fossil fuel and biomass burning emissions (1997–2010)

PubMed Central

Balch, Jennifer K.; Nagy, R. Chelsea; Archibald, Sally; Moritz, Max A.; Williamson, Grant J.

2016-01-01

Humans use combustion for heating and cooking, managing lands, and, more recently, for fuelling the industrial economy. As a shift to fossil-fuel-based energy occurs, we expect that anthropogenic biomass burning in open landscapes will decline as it becomes less fundamental to energy acquisition and livelihoods. Using global data on both fossil fuel and biomass burning emissions, we tested this relationship over a 14 year period (1997–2010). The global average annual carbon emissions from biomass burning during this time were 2.2 Pg C per year (±0.3 s.d.), approximately one-third of fossil fuel emissions over the same period (7.3 Pg C, ±0.8 s.d.). There was a significant inverse relationship between average annual fossil fuel and biomass burning emissions. Fossil fuel emissions explained 8% of the variation in biomass burning emissions at a global scale, but this varied substantially by land cover. For example, fossil fuel burning explained 31% of the variation in biomass burning in woody savannas, but was a non-significant predictor for evergreen needleleaf forests. In the land covers most dominated by human use, croplands and urban areas, fossil fuel emissions were more than 30- and 500-fold greater than biomass burning emissions. This relationship suggests that combustion practices may be shifting from open landscape burning to contained combustion for industrial purposes, and highlights the need to take into account how humans appropriate combustion in global modelling of contemporary fire. Industrialized combustion is not only an important driver of atmospheric change, but also an important driver of landscape change through companion declines in human-started fires. This article is part of the themed issue ‘The interaction of fire and mankind’. PMID:27216509

Ghg and Aerosol Emission from Fire Pixel during Crop Residue Burning Under Rice and Wheat Cropping Systems in North-West India

NASA Astrophysics Data System (ADS)

Acharya, Prasenjit; Sreekesh, S.; Kulshrestha, Umesh

2016-10-01

Emission of smoke and aerosol from open field burning of crop residue is a long-standing subject matter of atmospheric pollution. In this study, we proposed a new approach of estimating fuel load in the fire pixels and corresponding emissions of selected GHGs and aerosols i.e. CO2, CO, NO2, SO2, and total particulate matter (TPM) due to burning of crop residue under rice and wheat cropping systems in Punjab in north-west India from 2002 to 2012. In contrasts to the conventional method that uses RPR ratio to estimate the biomass, fuel load in the fire pixels was estimated as a function of enhanced vegetation index (EVI). MODIS fire products were used to detect the fire pixels during harvesting seasons of rice and wheat. Based on the field measurements, fuel load in the fire pixels were modelled as a function of average EVI using second order polynomial regression. Average EVI for rice and wheat crops that were extracted through Fourier transformation were computed from MODIS time series 16 day EVI composites. About 23 % of net shown area (NSA) during rice and 11 % during wheat harvesting seasons are affected by field burning. The computed average fuel loads are 11.32 t/ha (±17.4) during rice and 10.89 t/ha (±8.7) during wheat harvesting seasons. Calculated average total emissions of CO2, CO, NO2, SO2 and TPM were 8108.41, 657.85, 8.10, 4.10, and 133.21 Gg during rice straw burning and 6896.85, 625.09, 1.42, 1.77, and 57.55 Gg during wheat burning. Comparison of estimated values shows better agreement with the previous concurrent estimations. The method, however, shows its efficiency parallel to the conventional method of estimation of fuel load and related pollutant emissions.

Analysis of large soil samples for actinides

DOEpatents

Maxwell, III; Sherrod, L [Aiken, SC

2009-03-24

A method of analyzing relatively large soil samples for actinides by employing a separation process that includes cerium fluoride precipitation for removing the soil matrix and precipitates plutonium, americium, and curium with cerium and hydrofluoric acid followed by separating these actinides using chromatography cartridges.

Hygroscopic properties of atmospheric particles emitted during wintertime biomass burning episodes in Athens

NASA Astrophysics Data System (ADS)

Psichoudaki, Magda; Nenes, Athanasios; Florou, Kalliopi; Kaltsonoudis, Christos; Pandis, Spyros N.

2018-04-01

This study explores the Cloud Condensation Nuclei (CCN) activity of atmospheric particles during intense biomass burning periods in an urban environment. During a one-month campaign in the center of Athens, Greece, a CCN counter coupled with a Scanning Mobility Particle Sizer (SMPS) and a high resolution Aerosol Mass Spectrometer (HR-AMS) were used to measure the size-resolved CCN activity and composition of the atmospheric aerosols. During the day, the organic fraction of the particles was more than 50%, reaching almost 80% at night, when the fireplaces were used. Positive Matrix Factorization (PMF) analysis revealed 4 factors with biomass burning being the dominant source after 18:00 until the early morning. The CCN-based overall hygroscopicity parameter κ ranged from 0.15 to 0.25. During the night, when the biomass burning organic aerosol (bbOA) dominated, the hygroscopicity parameter for the mixed organic/inorganic particles was on average 0.16. The hygroscopicity of the biomass-burning organic particles was 0.09, while the corresponding average value for all organic particulate matter during the campaign was 0.12.

On-line Monitoring of Actinide Concentrations in Molten Salt Electrolyte

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis W. Johnson; Mary Lou Dunzik-Gougar; Shelly X. Li

2006-11-01

Pyroprocessing, a treatment method for spent nuclear fuel (SNF), is currently being studied at the Idaho National Laboratory. The key operation of pyroprocessing which takes place in an electrorefiner is the electrochemical separation of actinides from other constituents in spent fuel. Efficient operation of the electrorefiner requires online monitoring of actinide concentrations in the molten salt electrolyte. Square-wave voltammetry (SWV) and normal pulse voltammetry (NPV) are being investigated to assess their applicability to the measurement of actinide concentrations in the electrorefiner.

Method for the concentration and separation of actinides from biological and environmental samples

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1989-05-30

A method and apparatus for the quantitative recover of actinide values from biological and environmental sample by passing appropriately prepared samples in a mineral acid solution through a separation column of a dialkyl(phenyl)-N,N-dialylcarbamoylmethylphosphine oxide dissolved in tri-n-butyl phosphate on an inert substrate which selectively extracts the actinide values. The actinide values can be eluted either as a group or individually and their presence quantitatively detected by alpha counting. 3 figs.

Burning rate of solid wood measured in a heat release rate calorimeter

Treesearch

H. C. Tran; R. H. White

1992-01-01

Burning rate is a key factor in modeling fire growth and fire endurance of wood structures. This study investigated the burning rate of selected wood materials as determined by heat release, mass loss and charring rates. Thick samples of redwood, southern pine, red oak and basswood were tested in a heat release rate calorimeter. Results on ignitability and average beat...

Emissions, energy return and economics from utilizing forest residues for thermal energy compared to onsite pile burning

Treesearch

Greg Jones; Dan Loeffler; Edward Butler; Woodam Chung; Susan Hummel

2010-01-01

The emissions from delivering and burning forest treatment residue biomass in a boiler for thermal energy were compared with onsite disposal by pile-burning and using fossil fuels for the equivalent energy. Using biomass for thermal energy reduced carbon dioxide emissions on average by 39 percent and particulate matter emissions by 89 percent for boilers with emission...

Propranolol attenuates hemorrhage and accelerates wound healing in severely burned adults.

PubMed

Ali, Arham; Herndon, David N; Mamachen, Ashish; Hasan, Samir; Andersen, Clark R; Grogans, Ro-Jon; Brewer, Jordan L; Lee, Jong O; Heffernan, Jamie; Suman, Oscar E; Finnerty, Celeste C

2015-05-04

Propranolol, a nonselective β-blocker, exerts an indirect effect on the vasculature by leaving α-adrenergic receptors unopposed, resulting in peripheral vasoconstriction. We have previously shown that propranolol diminishes peripheral blood following burn injury by increasing vascular resistance. The purpose of this study was to investigate whether wound healing and perioperative hemodynamics are affected by propranolol administration in severely burned adults. Sixty-nine adult patients with burns covering ≥ 30% of the total body surface area (TBSA) were enrolled in this IRB-approved study. Patients received standard burn care with (n = 35) or without (control, n = 34) propranolol. Propranolol was administered within 48 hours of burns and given throughout hospital discharge to decrease heart rate by approximately 20% from admission levels. Wound healing was determined by comparing the time between grafting procedures. Blood loss was determined by comparing pre- and postoperative hematocrit while factoring in operative graft area. Data were collected between first admission and first discharge. Demographics, burn size, and mortality were comparable in the control and propranolol groups. Patients in the propranolol group received an average propranolol dose of 3.3 ± 3.0 mg/kg/day. Daily average heart rate over the first 30 days was significantly lower in the propranolol group (P < 0.05). The average number of days between skin grafting procedures was also lower in propranolol patients (10 ± 5 days) than in control patients (17 ± 12 days; P = 0.02), indicative of a faster donor site healing time in the propranolol group. Packed red blood cell infusion was similar between groups (control 5.3 ± 5.4 units vs. propranolol 4.4 ± 3.1 units, P = 0.89). Propranolol was associated with a 5 to 7% improvement in perioperative hematocrit during grafting procedures of 4,000 to 16,000 cm(2) compared to control (P = 0.002). Administration of propranolol during the acute hospitalization period diminishes blood loss during skin grafting procedures and markedly improves wound healing in severely burned adults. As burn patients require serial surgical interventions for motor and cosmetic repair, restricting blood loss during operative intervention is optimal.

Testing actinide fission yield treatment in CINDER90 for use in MCNP6 burnup calculations

DOE PAGES

Fensin, Michael Lorne; Umbel, Marissa

2015-09-18

Most of the development of the MCNPX/6 burnup capability focused on features that were applied to the Boltzman transport or used to prepare coefficients for use in CINDER90, with little change to CINDER90 or the CINDER90 data. Though a scheme exists for best solving the coupled Boltzman and Bateman equations, the most significant approximation is that the employed nuclear data are correct and complete. Thus, the CINDER90 library file contains 60 different actinide fission yields encompassing 36 fissionable actinides (thermal, fast, high energy and spontaneous fission). Fission reaction data exists for more than 60 actinides and as a result, fissionmore » yield data must be approximated for actinides that do not possess fission yield information. Several types of approximations are used for estimating fission yields for actinides which do not possess explicit fission yield data. The objective of this study is to test whether or not certain approximations of fission yield selection have any impact on predictability of major actinides and fission products. Further we assess which other fission products, available in MCNP6 Tier 3, result in the largest difference in production. Because the CINDER90 library file is in ASCII format and therefore easily amendable, we assess reasons for choosing, as well as compare actinide and major fission product prediction for the H. B. Robinson benchmark for, three separate fission yield selection methods: (1) the current CINDER90 library file method (Base); (2) the element method (Element); and (3) the isobar method (Isobar). Results show that the three methods tested result in similar prediction of major actinides, Tc-99 and Cs-137; however, certain fission products resulted in significantly different production depending on the method of choice.« less

Fate and transport of plutonium-239 + 240 and Americium-241 in the soil of Rocky Flats, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litaor, M.I.; Barth, G.R.; Zika, E.M.

1996-07-01

Actinides contamination of soils around Rocky Flats, CO, resulted from leaking drums of Pu-contaminated oil stored at an outdoor site. The transport of these actinides through the soil to groundwater was studied using an advanced monitoring system (MS). The fully automated, remotely controlled MS gathered real-time data on soil water content, groundwater level, and timing of gravitationally flowing water. Controlled rain simulations coupled with measurements of volume flux and actinide activities provided essential information about the fate and transport of Pu-239 + 240 and Am-241. Volume fluxes at most sampling locations were similar, regardless of the antecedent moisture or themore » duration, frequency, and intensity of the simulated rain. Actinide activities were not correlated with the measured volume flux, or the duration, frequency, and intensity of the simulated rain. Flow was facilitated primarily via macropore channeling. The relatively short residence time precluded a continuous interaction between the soil and the flowing water, which minimized the movement of actinides in the soil. Actinide activities in the interstitial water collected from the upper 20 cm of the soil were significantly higher (P>0.001) than water collected at deeper sampling depths (20-70 cm). Actinide activity in water samples from the deepest sampling depth (40-70 cm) did not exceed 0.4 Bq/L. These results suggest that, under the experimental conditions, the movement of actinides was restricted to the top 20 cm. A transport mechanism involving discrete Pu oxide particles, coupled with macropore channeling is proposed to explain the observed actinide activities in the soil. 31 refs., 6 figs., 7 tabs.« less

Rapid determination of alpha emitters using Actinide resin.

PubMed

Navarro, N; Rodriguez, L; Alvarez, A; Sancho, C

2004-01-01

The European Commission has recently published the recommended radiological protection criteria for the clearance of building and building rubble from the dismantling of nuclear installations. Radionuclide specific clearance levels for actinides are very low (between 0.1 and 1 Bq g(-1)). The prevalence of natural radionuclides in rubble materials makes the verification of these levels by direct alpha counting impossible. The capability of Actinide resin (Eichrom Industries, Inc.) for extracting plutonium and americium from rubble samples has been tested in this work. Besides a strong affinity for actinides in the tri, tetra and hexavalent oxidation states, this extraction chromatographic resin presents an easy recovery of absorbed radionuclides. The retention capability was evaluated on rubble samples spiked with certified radionuclide standards (239Pu and 241Am). Samples were leached with nitric acid, passed through a chromatographic column containing the resin and the elution fraction was measured by LSC. Actinide retention varies from 60% to 80%. Based on these results, a rapid method for the verification of clearance levels for actinides in rubble samples is proposed.

Nuclear fuels - Present and future

NASA Astrophysics Data System (ADS)

Olander, D.

2009-06-01

The important developments in nuclear fuels and their problems are reviewed and compared with the status of present light-water reactor fuels. The limitations of LWR fuels are reviewed with respect to important recent concerns, namely provision of outlet coolant temperatures high enough for use in H 2 production, destruction of plutonium to eliminate proliferation concerns, and burning of the minor actinides to reduce the waste repository heat load and long-term radiation hazard. In addition to current oxide-based fuel rod designs, the hydride fuel with liquid-metal thermal bonding of the fuel-cladding gap is covered. Finally, two of the most promising Generation IV reactor concepts, the very high temperature reactor and the sodium fast reactor, and the accompanying reprocessing technologies, aqueous-based UREX+1a and pyrometallurgical, are summarized. In all of the topics covered, the thermodynamics involved in the fuel's behavior under irradiation and in the reprocessing schemes are emphasized.

Fission products and nuclear fuel behaviour under severe accident conditions part 1: Main lessons learnt from the first VERDON test

NASA Astrophysics Data System (ADS)

Pontillon, Y.; Geiger, E.; Le Gall, C.; Bernard, S.; Gallais-During, A.; Malgouyres, P. P.; Hanus, E.; Ducros, G.

2017-11-01

This paper describes the first VERDON test performed at the end of September 2011 with special emphasis on the behaviour of fission products (FP) and actinides during the accidental sequence itself. Two other papers discuss in detail the post-test examination results (SEM, EPMA and SIMS) of the VERDON-1 sample. The first VERDON test was devoted to studying UO2 fuel behaviour and fission product releases under reducing conditions at very high temperature (∼2883 K), which was able to confirm the very good performance of the VERDON loop. The fuel sample did not lose its integrity during this test. According to the FP behaviour measured by the online gamma station (fuel sight), the general classification of the FP in relation to their released fraction is very accurate, and the burn-up effect on the release rate is clearly highlighted.

Five-year epidemiology of liquefied petroleum gas-related burns.

PubMed

Jin, Ronghua; Wu, Pan; Ho, Jon Kee; Wang, Xingang; Han, Chunmao

2018-02-01

The incidence of liquefied petroleum gas (LPG)-related burns has increased over recent years, and it has become a serious public health issue in developing countries such as India and Turkey. This paper aims to investigate the epidemiological characteristics of LPG-related burns to provide assistance and suggestions for planning prevention strategies. A 5-year retrospective study was conducted in patients with LPG-related burns admitted to the Department of Burns & Wound Care Center, Second Affiliated Hospital of Zhejiang University, College of Medicine, between 1st January 2011 and 31st December 2015. Information obtained for each patient included age, gender, education status, occupation, medical insurance, average hospital cost, length of hospital stay, monthly distribution of incidence, place of burns, mechanism of burns, extent of burns, site of burns, accompanying injuries, and treatment outcomes. For the first 4 years (2011-2014), the yearly incidence of LPG-related burns was at approximately 10% of all burns; however, in the fifth year (2015) alone, there was a surge to 26.94%. A total of 1337 burn patients were admitted during this period. Of these, 195 patients were admitted because of 169 LPG-related accidents; there were 11 accidents involving more than one victim. LPG-related burns occurred most frequently in patients aged 21-60 years (73.85%). The majority of injuries occurred from May to August (56.41%), and the most common place was home (83.08%, 162 patients). Gas leak (81.03%) was the main cause of LPG-related burns, followed by inappropriate operation (7.69%) and cooking negligence (2.05%). The mean burn area was 31.32±25.40% of TBSA. The most common sites of burns were the upper extremities (37.47%), followed by the head/face and neck (24.80%) and lower extremities (19.95%). The most common accompanying injuries included inhalation injury (23.59%), shock (8.71%), and external injury (7.18%). The average hospital stay was 22.90±19.47days (range 2-84 days). Only 48 patients (24.62%) had medical insurance, while 124 patients (63.59%) had no medical insurance. The average hospital cost of the no medical insurance group was significantly higher (p<0.0001) than that of the medical insurance group. In addition, 72.73% of patients who left against medical advice (LAMA) were uninsured. The number of patients who recovered at our hospital was 165 (84.62%), while 22 patients (11.28%) LAMA. The overall mortality rate was 4.10% (8 patients). Our study shows that the exponential increase in LPG-related burns is alarming. This calls for rigorous precautions. Because gas leak was the main cause of LPG-related burns, any part of LPG stove system that shows signs of weathering should be replaced regularly. In addition, we also found that most of the LAMA patients were uninsured. Thus, comprehensive medical insurance should be involved early in the recovery process to assure a safe and adequate discharge. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Les Sequelles de Brulures: Epidemiologie et Traitements

PubMed Central

Chafiki, N.; Fassi Fihri, J.; Boukind, E.H.

2007-01-01

Summary An epidemiological study was performed in the Burns and Reconstructive Surgery Centre in Casablanca University Hospital (Morocco). A one-hundred patient cohort was studied, with adults accounting for 55% of the cases; the average age was 20 years. Females represented 61% of the cohort. More than 50% of the patients were seen first in regional hospitals. The average time before healing was 7 months and 11 days, and minor and major burn scarring was frequent. The clinical epidemiology is described for each topographical body part and the results are compared with those in the literature. Various therapeutic approaches, using medical and surgical treatment, were followed. It is shown that prevention is still the best approach in the treatment of burns sequelae. PMID:21991083

Heparin Reduced Mortality and Sepsis in Severely Burned Children

PubMed Central

Zayas, G.J.; Bonilla, A.M.; Saliba, M.J

2007-01-01

Summary Objectives. In El Salvador, before 1999, morbidity and mortality in severely burned children were high. In 1998, all children with burns of 40% or larger size died and sepsis was found. With heparin use in 1999, some similarly burned children survived, and sepsis, pain, procedures, and scars were noted to be less. This retrospective study presents the details. Methods. A study was conducted at the National Children's Hospital in El Salvador of all children with burns over 20% size treated in 1998, when no heparin was used, and in 1999, when heparin was added to burns treatment, using an ethics committee approved protocol in use in twelve other countries. Sodium aqueous heparin solution USP from an intestinal source was infused intravenously and applied topically onto burn surfaces and within blisters for the first 1-3 days post-burn. Then heparin, in diminishing doses, was continued only topically until healing. The treatments in 1998 and 1999 were otherwise the same, except that fewer procedures were needed in 1999. Results. There were no significant differences in gender, age, weight, burn aetiology, or burn size between the burned children in 1998 and those in 1999. Burn pain was relieved and pain medicine was not needed in children treated with heparin in 1999. In 1998, one child survived who had a 35% size burn, and the eight children died who had burns of 40% and over. The survival rate was one out of nine (11%). The average burn size was 51.7%. With heparin use in 1999, six of the ten children survived burns of 50.7% average size. The increase in survival with heparin from 11% to 60% and, therefore, the decrease in mortality from 89% to 40% were significant (p < 0.04). Clinical symptoms and positive blood cultures documented bacterial sepsis in the nine children in 1998. In 1999, the blood cultures for sepsis were positive in the four children who died and negative in the six who survived. The nine versus four differences in the incidence of sepsis between 1998 and 1999 was significant (p < 0.008). The survivors had notably smooth skin. Conclusions. The use of heparin in this study relieved burn pain, significantly reduced mortality and sepsis with fewer procedures, and discernibly improved cosmetic results. PMID:21991064

Investigation of the burning configuration of a coaxial injector in a combustion chamber

NASA Technical Reports Server (NTRS)

Ohara, J.

1978-01-01

An analytical investigation was made into the stability of the burning configuration of a single coaxial injector surrounded by similar injectors. The stability criteria was based on an average pressure difference along the boundaries of the adjacent stream tubes as calculated using Spaulding's numerical method. The results indicate qualitatively that there is a tendency for the injectors to have different burning configurations. It is believed that the configuration achieved is random, however once the burning configuration is established, it is believed to persist.

Comparison Between Civilian Burns and Combat burns From Operation Iraqi Freedom and Operation Enduring Freedom

DTIC Science & Technology

2006-06-01

to the average burn size reported from the ABA Burn Registry in 1995 (14% TBSA).20 We also found that the time to death in those who died, time on...after a prolonged stay in theater (up to 30 days, COL (retired) Basil A. Pruitt, personal commu- nication). They found a mortality rate of 7.9% in...from the green books that you know about. When we have that, we may be able to make that same comparison from the Vietnam era. DR. BASIL A. PRUITT, JR

Signals from Fat After Injury: Plasma Adipokines and Ghrelin Concentrations in the Severely Burned

DTIC Science & Technology

2012-09-26

of insulin resis- tance was calculated with a modified version of homeostasis mod- el assessment of insulin resistance ( HOMA - IR ) formula by using...average glucose and average circulating insulin levels of subjects. In this study, HOMA - IR was used to assess severity of insulin resis- tance rather than...were 217% higher than controls (Table 2). Thus, based on the HOMA - IR , burned subjects were more insulin resistant than controls (Table 2). As all of the

Religious burning as a potential major source of atmospheric fine aerosols in summertime Lhasa on the Tibetan Plateau

NASA Astrophysics Data System (ADS)

Cui, Yu Yan; Liu, Shang; Bai, Zhixuan; Bian, Jianchun; Li, Dan; Fan, Kaiyu; McKeen, Stuart A.; Watts, Laurel A.; Ciciora, Steven J.; Gao, Ru-Shan

2018-05-01

We carried out field measurements of aerosols in Lhasa, a major city in the Tibetan Plateau that has been experiencing fast urbanization and industrialization. Aerosol number size distribution was continuously measured using an optical particle size spectrometer near the center of Lhasa city during the Asian summer monsoon season in 2016. The mass concentration of fine particles was modulated by boundary layer dynamics, with an average of 11 μg m-3 and the high values exceeding 50 μg m-3 during religious holidays. Daytime high concentration coincided with the religious burning of biomass and incense in the temples during morning hours, which produced heavy smoke. Factor analysis revealed a factor that likely represented religious burning. The factor contributed 34% of the campaign-average fine particle mass and the contribution reached up to 80% during religious holidays. The mass size distribution of aerosols produced from religious burnings peaked at ∼500 nm, indicating that these particles could efficiently decrease visibility and promote health risk. Because of its significance, our results suggest that further studies of religious burning, a currently under-studied source, are needed in the Tibetan Plateau and in other regions of the world where religious burnings are frequently practiced.

Energy Dependence of Fission Product Yields from 235 U, 238U, and 239Pu for Incident Neutron Energies Between 0.5 and 14.8 MeV

NASA Astrophysics Data System (ADS)

Gooden, Matthew Edgell

A joint collaboration between the Triangle Universities Nuclear Laboratory (TUNL), Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL) has performed a set of absolute Fission Product Yield (FPY) measurements. Using monoenergetic neutron at energies between 0.5 and 14.8 MeV, the excitation functions of a number of fission products from 235U, 238U and 239Pu have begun to be mapped out. This work has practical applications for the determination of weapon yields and the rate of burn-up in nuclear reactors, while also providing important insight into the fission process. Combining the use of a dual-fission ionization chamber and gamma-ray spectroscopy, absolute FPYs have been determined for approximately 15 different fission products. The dual-fission chamber is a back-to-back ionization chamber system with a 'thin' actinide foil in each chamber as a monitor or reference foil. The chamber holds a 'thick' target in the center of the system such that the target and reference foils are of the same actinide isotope. This allows for simple mass scaling between the recorded number of fissions in the individual chambers and the number of fissions in the center thick target, eliminating the need for the knowledge of the absolute fission cross section and its uncertainty. The 'thick' target was removed after activation and gamma-rays counted with well shielded High Purity Germanium (HPGe) detectors for a period of 1.5 - 2 months.

PROCESS OF PRODUCING ACTINIDE METALS

DOEpatents

Magel, T.T.

1959-07-14

The preparation of actinide metals in workable, coherent form is described. In general, the objects of the invention are achieved by heating a mixture of an oxide and a halide of an actinide metal such as uranium with an alkali metal on alkaline earth metal reducing agent in the presence of iodine.

Process to remove actinides from soil using magnetic separation

DOEpatents

Avens, Larry R.; Hill, Dallas D.; Prenger, F. Coyne; Stewart, Walter F.; Tolt, Thomas L.; Worl, Laura A.

1996-01-01

A process of separating actinide-containing components from an admixture including forming a slurry including actinide-containing components within an admixture, said slurry including a dispersion-promoting surfactant, adjusting the pH of the slurry to within a desired range, and, passing said slurry through a pretreated matrix material, said matrix material adapted to generate high magnetic field gradients upon the application of a strong magnetic field exceeding about 0.1 Tesla whereupon a portion of said actinide-containing components are separated from said slurry and remain adhered upon said matrix material is provided.

Preparation of actinide boride materials via solid-state metathesis reactions and actinide dicarbollide precursors

NASA Astrophysics Data System (ADS)

Lupinetti, Anthony J.; Fife, Julie; Garcia, Eduardo; Abney, Kent D.

2000-07-01

Information gaps exist in the knowledge base needed for choosing among the alternate processes to be used in the safe conversion of fissile materials to optimal forms for safe interim storage, long-term storage, and ultimate disposition. The current baseline storage technology for various wastes uses borosilicate glasses.1 The focus of this paper is the synthesis of actinide-containing ceramic materials at low and moderate temperatures (200 °C-1000 °C) using molecular and polymeric actinide borane and carborane complexes.

Actinides in the Geosphere

NASA Astrophysics Data System (ADS)

Runde, Wolfgang; Neu, Mary P.

Since the 1950s actinides have been used to benefit industry, science, health, and national security. The largest industrial application, electricity generation from uranium and thorium fuels, is growing worldwide. Thus, more actinides are being mined, produced, used and processed than ever before. The future of nuclear energy hinges on how these increasing amounts of actinides are contained in each stage of the fuel cycle, including disposition. In addition, uranium and plutonium were built up during the Cold War between the United States and the Former Soviet Union for defense purposes and nuclear energy.

Actinide targets for the synthesis of super-heavy elements

DOE PAGES

Roberto, J.; Alexander, Charles W.; Boll, Rose Ann; ...

2015-06-18

Since 2000, six new super-heavy elements with atomic numbers 113 through 118 have been synthesized in hot fusion reactions of 48Ca beams on actinide targets. These target materials, including 242Pu, 244Pu, 243Am, 245Cm, 248Cm, 249Cf, and 249Bk, are available in very limited quantities and require specialized production and processing facilities resident in only a few research centers worldwide. This report describes the production and chemical processing of heavy actinide materials for super-heavy element research, current availabilities of these materials, and related target fabrication techniques. The impact of actinide materials in super-heavy element discovery is reviewed, and strategies for enhancing themore » production of rare actinides including 249Bk, 251Cf, and 254Es are described.« less

Mixed monofunctional extractants for trivalent actinide/lanthanide separations: TALSPEAK-MME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Aaron T.; Nash, Kenneth L.

The basic features of an f-element extraction process based on a solvent composed of equimolar mixtures of Cyanex-923 (a mixed trialkyl phosphine oxide) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) extractants in n-dodecane are investigated in this report. This system, which combines features of the TRPO and TALSPEAK processes, is based on co-extraction of trivalent lanthanides and actinides from 0.1 to 1.0 M HNO 3 followed by application of a buffered aminopolycarboxylate solution strip to accomplish a Reverse TALSPEAK selective removal of actinides. This mixed-extractant medium could enable a simplified approach to selective trivalent f-element extraction and actinide partitioning in amore » single process. As compared with other combined process applications in development for more compact actinide partitioning processes (DIAMEX-SANEX, GANEX, TRUSPEAK, ALSEP), this combination features only monofunctional extractants with high solubility limits and comparatively low molar mass. Selective actinide stripping from the loaded extractant phase is done using a glycine-buffered solution containing N-(2-hydroxyethyl)ethylenediaminetriacetic acid (HEDTA) or triethylenetetramine-N,N,N',N'',N''',N'''-hexaacetic acid (TTHA). Lastly, the results reported provide evidence for simplified interactions between the two extractants and demonstrate a pathway toward using mixed monofunctional extractants to separate trivalent actinides (An) from fission product lanthanides (Ln).« less

Mixed monofunctional extractants for trivalent actinide/lanthanide separations: TALSPEAK-MME

DOE PAGES

Johnson, Aaron T.; Nash, Kenneth L.

2015-08-20

The basic features of an f-element extraction process based on a solvent composed of equimolar mixtures of Cyanex-923 (a mixed trialkyl phosphine oxide) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) extractants in n-dodecane are investigated in this report. This system, which combines features of the TRPO and TALSPEAK processes, is based on co-extraction of trivalent lanthanides and actinides from 0.1 to 1.0 M HNO 3 followed by application of a buffered aminopolycarboxylate solution strip to accomplish a Reverse TALSPEAK selective removal of actinides. This mixed-extractant medium could enable a simplified approach to selective trivalent f-element extraction and actinide partitioning in amore » single process. As compared with other combined process applications in development for more compact actinide partitioning processes (DIAMEX-SANEX, GANEX, TRUSPEAK, ALSEP), this combination features only monofunctional extractants with high solubility limits and comparatively low molar mass. Selective actinide stripping from the loaded extractant phase is done using a glycine-buffered solution containing N-(2-hydroxyethyl)ethylenediaminetriacetic acid (HEDTA) or triethylenetetramine-N,N,N',N'',N''',N'''-hexaacetic acid (TTHA). Lastly, the results reported provide evidence for simplified interactions between the two extractants and demonstrate a pathway toward using mixed monofunctional extractants to separate trivalent actinides (An) from fission product lanthanides (Ln).« less

[Emission inventory of greenhouse gases from agricultural residues combustion: a case study of Jiangsu Province].

PubMed

Liu, Li-hua; Jiang, Jing-yan; Zong, Liang-gang

2011-05-01

Burning of agricultural crop residues was a major source greenhouse gases. In this study, the proportion of crop straws (rice, wheat, maize, oil rape, cotton and soja) in Jiangsu used as household fuel and direct open burning in different periods (1990-1995, 1996-2000, 2001-2005 and 2006-2008) was estimated through questionnaire. The emission factors of CO2, CO, CH4 and NO20 from the above six types of crop straws were calculated by the simulated burning experiment. Thus the emission inventory of greenhouse gases from crop straws burning was established according to above the burning percentages and emission factors, ratios of dry residues to production and crop productions of different periods in Jiangsu province. Results indicated that emission factors of CO2, CO, CH4 and N2O depended on crop straw type. The emission factors of CO2 and CH4 were higher for oil rape straw than the other straws, while the maize and the rice straw had the higher N2O and CO emission factor. Emission inventory of greenhouse gases from agricultural residues burning in Jiangsu province showed, the annual average global warming potential (GWP) of six tested crop straws were estimated to be 9.18 (rice straw), 4.35 (wheat straw), 2.55 (maize straw), 1.63 (oil rape straw), 0.55 (cotton straw) and 0. 39 (soja straw) Tg CO2 equivalent, respectively. Among the four study periods, the annual average GWP had no obvious difference between the 1990-1995 and 2006-2008 periods, while the maximal annual average GWP (23.83 Tg CO2 equivalent) happened in the 1996-2000 period, and the minimum (20.30 Tg CO2 equivalent) in 1996-2000 period.

Geoantineutrino spectrum and slow nuclear burning on the boundary of the liquid and solid phases of the Earth's core

NASA Astrophysics Data System (ADS)

Rusov, V. D.; Pavlovich, V. N.; Vaschenko, V. N.; Tarasov, V. A.; Zelentsova, T. N.; Bolshakov, V. N.; Litvinov, D. A.; Kosenko, S. I.; Byegunova, O. A.

2007-09-01

We give an alternative description of the data produced in the KamLAND experiment. Assuming the existence of a natural nuclear reactor on the boundary of the liquid and solid phases of the Earth's core, a geoantineutrino spectrum is obtained. This assumption is based on the experimental results of V. Anisichkin and his collaborators on the interaction of uranium dioxide and uranium carbide with iron-nickel and silica-alumina melts at high pressure (5-10 GPa) and temperature (1600-2200°C), which led to the proposal of the existence of an actinide shell in the Earth's core. We describe the operating mechanism of this reactor as solitary waves of nuclear burning in 238U and/or 232Th medium, in particular, as neutron fission progressive waves of Feoktistov and/or Teller et al. type. Next, we propose a simplified model for the accumulation and burn-up kinetics in Feoktistov's U-Pu fuel cycle. We also apply this model for numerical simulations of neutron fission wave in a two-phase UO2/Fe medium on the surface of the Earth's solid core. The proposed georeactor model offers a mechanism for the generation of 3He. The 3He/4He distribution in the Earth's interior is calculated, which in turn can be used as a natural quantitative criterion of the georeactor thermal power. Finally, we give a tentative estimation of the geoantineutrino intensity and spectrum on the Earth's surface. For this purpose we use the O'Nions et al. geochemical model of mantle differentiation and crust growth complemented by a nuclear energy source (georeactor with power of 30 TW).

Cognition in patients with burn injury in the inpatient rehabilitation population.

PubMed

Purohit, Maulik; Goldstein, Richard; Nadler, Deborah; Mathews, Katie; Slocum, Chloe; Gerrard, Paul; DiVita, Margaret A; Ryan, Colleen M; Zafonte, Ross; Kowalske, Karen; Schneider, Jeffrey C

2014-07-01

To analyze potential cognitive impairment in patients with burn injury in the inpatient rehabilitation population. Rehabilitation patients with burn injury were compared with the following impairment groups: spinal cord injury, amputation, polytrauma and multiple fractures, and hip replacement. Differences between the groups were calculated for each cognitive subscale item and total cognitive FIM. Patients with burn injury were compared with the other groups using a bivariate linear regression model. A multivariable linear regression model was used to determine whether differences in cognition existed after adjusting for covariates (eg, sociodemographic factors, facility factors, medical complications) based on previous studies. Inpatient rehabilitation facilities. Data from Uniform Data System for Medical Rehabilitation from 2002 to 2011 for adults with burn injury (N=5347) were compared with other rehabilitation populations (N=668,816). Not applicable. Comparison of total cognitive FIM scores and subscales (memory, verbal comprehension, verbal expression, social interaction, problem solving) for patients with burn injury versus other rehabilitation populations. Adults with burn injuries had an average total cognitive FIM score ± SD of 26.8±7.0 compared with an average FIM score ± SD of 28.7±6.0 for the other groups combined (P<.001). The subscale with the greatest difference between those with burn injury and the other groups was memory (5.1±1.7 compared with 5.6±1.5, P<.001). These differences persisted after adjustment for covariates. Adults with burn injury have worse cognitive FIM scores than other rehabilitation populations. Future research is needed to determine the impact of this comorbidity on patient outcomes and potential interventions for these deficits. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Minor actinide transmutation in thorium and uranium matrices in heavy water moderated reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatti, Zaki; Hyland, B.; Edwards, G.W.R.

2013-07-01

The irradiation of Th{sup 232} breeds fewer of the problematic minor actinides (Np, Am, Cm) than the irradiation of U{sup 238}. This characteristic makes thorium an attractive potential matrix for the transmutation of these minor actinides, as these species can be transmuted without the creation of new actinides as is the case with a uranium fuel matrix. Minor actinides are the main contributors to long term decay heat and radiotoxicity of spent fuel, so reducing their concentration can greatly increase the capacity of a long term deep geological repository. Mixing minor actinides with thorium, three times more common in themore » Earth's crust than natural uranium, has the additional advantage of improving the sustainability of the fuel cycle. In this work, lattice cell calculations have been performed to determine the results of transmuting minor actinides from light water reactor spent fuel in a thorium matrix. 15-year-cooled group-extracted transuranic elements (Np, Pu, Am, Cm) from light water reactor (LWR) spent fuel were used as the fissile component in a thorium-based fuel in a heavy water moderated reactor (HWR). The minor actinide (MA) transmutation rates, spent fuel activity, decay heat and radiotoxicity, are compared with those obtained when the MA were mixed instead with natural uranium and taken to the same burnup. Each bundle contained a central pin containing a burnable neutron absorber whose initial concentration was adjusted to have the same reactivity response (in units of the delayed neutron fraction β) for coolant voiding as standard NU fuel. (authors)« less

Lightning Forcing in Global Fire Models: The Importance of Temporal Resolution

NASA Astrophysics Data System (ADS)

Felsberg, A.; Kloster, S.; Wilkenskjeld, S.; Krause, A.; Lasslop, G.

2018-01-01

In global fire models, lightning is typically prescribed from observational data with monthly mean temporal resolution while meteorological forcings, such as precipitation or temperature, are prescribed in a daily resolution. In this study, we investigate the importance of the temporal resolution of the lightning forcing for the simulation of burned area by varying from daily to monthly and annual mean forcing. For this, we utilize the vegetation fire model JSBACH-SPITFIRE to simulate burned area, forced with meteorological and lightning data derived from the general circulation model ECHAM6. On a global scale, differences in burned area caused by lightning forcing applied in coarser temporal resolution stay below 0.55% compared to the use of daily mean forcing. Regionally, however, differences reach up to 100%, depending on the region and season. Monthly averaged lightning forcing as well as the monthly lightning climatology cause differences through an interaction between lightning ignitions and fire prone weather conditions, accounted for by the fire danger index. This interaction leads to decreased burned area in the boreal zone and increased burned area in the Tropics and Subtropics under the coarser temporal resolution. The exclusion of interannual variability, when forced with the lightning climatology, has only a minor impact on the simulated burned area. Annually averaged lightning forcing causes differences as a direct result of the eliminated seasonal characteristics of lightning. Burned area is decreased in summer and increased in winter where fuel is available. Regions with little seasonality, such as the Tropics and Subtropics, experience an increase in burned area.

Creation of Consistent Burn Wounds: A Rat Model

PubMed Central

Cai, Elijah Zhengyang; Ang, Chuan Han; Raju, Ashvin; Tan, Kong Bing; Hing, Eileen Chor Hoong; Loo, Yihua; Wong, Yong Chiat; Lee, Hanjing; Lim, Jane; Moochhala, Shabbir M; Hauser, Charlotte AE

2014-01-01

Background Burn infliction techniques are poorly described in rat models. An accurate study can only be achieved with wounds that are uniform in size and depth. We describe a simple reproducible method for creating consistent burn wounds in rats. Methods Ten male Sprague-Dawley rats were anesthetized and dorsum shaved. A 100 g cylindrical stainless-steel rod (1 cm diameter) was heated to 100℃ in boiling water. Temperature was monitored using a thermocouple. We performed two consecutive toe-pinch tests on different limbs to assess the depth of sedation. Burn infliction was limited to the loin. The skin was pulled upwards, away from the underlying viscera, creating a flat surface. The rod rested on its own weight for 5, 10, and 20 seconds at three different sites on each rat. Wounds were evaluated for size, morphology and depth. Results Average wound size was 0.9957 cm2 (standard deviation [SD] 0.1845) (n=30). Wounds created with duration of 5 seconds were pale, with an indistinct margin of erythema. Wounds of 10 and 20 seconds were well-defined, uniformly brown with a rim of erythema. Average depths of tissue damage were 1.30 mm (SD 0.424), 2.35 mm (SD 0.071), and 2.60 mm (SD 0.283) for duration of 5, 10, 20 seconds respectively. Burn duration of 5 seconds resulted in full-thickness damage. Burn duration of 10 seconds and 20 seconds resulted in full-thickness damage, involving subjacent skeletal muscle. Conclusions This is a simple reproducible method for creating burn wounds consistent in size and depth in a rat burn model. PMID:25075351

Characterization of skin allograft use in thermal injury.

PubMed

Fletcher, John L; Caterson, E J; Hale, Robert G; Cancio, Leopoldo C; Renz, Evan M; Chan, Rodney K

2013-01-01

This study provides objective data on the practice of allograft usage in severely burned patients. Furthermore, gaps in our knowledge are identified, and areas for further research are delineated. Using an institutional review board-approved protocol, active duty military patients injured while deployed in support of overseas contingency operations and treated at our burn center between March 2003 and December 2010 were identified. Their electronic medical records were reviewed for allograft use, TBSA burned, injury severity score, anatomic distribution of burns, operative burden, length of stay, transfusions, and outcome. Among 844 patients, 112 (13.3%) received allograft and 732 (86.7%) did not. The amount of allograft used per patient varied and was not normally distributed (median, 23.5; interquartile range, 69.5). Patients received allograft skin an average of 12.75 times during their admission. Allografted patients sustained severe burns (μ, 53.8% TBSA); most were transfused (71.2%) and grafted frequently, averaging every 7.45 days. Most commonly, allograft was placed on the extremities (66.5%) followed by the trunk (44.2%); however, the vast majority of allografted patients also had concomitant burns of the head (91.1%) and hands (87.5%). All-cause mortality among the allografted patients was 19.1%. In conclusion, allograft is commonly used in the surgical treatment of severe burns. Although there are no anatomic limitations to allograft placement, there are distinct patterns of use. Given the role of allograft in the acute management of large burns, there is need for further investigation of its effect on mortality, morbidity, and antigenicity.

Evaluation of Demographic and Clinical Characteristics of Patients who Attempted Suicide by Self-Inflicted Burn Using Catalyzer

PubMed Central

Yabanoglu, Hakan; Aytac, Huseyin Ozgur; Turk, Emin; Karagulle, Erdal; Belli, Sedat; Sakallioglu, Ayse Ebru; Tarim, Mehmet Akin; Moray, Gokhan; Haberal, Mehmet

2015-01-01

Our aim was to assess demographic and clinical characteristics of patients treated at our units who attempted suicide by self-incineration, and to compare the results of burns with or without catalyzer use. Twenty patients who attempted suicide by self-incineration were examined in terms of clinical and demographic characteristics. Average age of the study population was 35 years (range 13−85 years). Average percentage of total body surface area burn was 53% (9%−100%). Six (30%) patients used gasoline and 5 (25%) used paint thinner in order to catalyze burning. Of these 11 patients who used a catalyzer, 5 (45.4%) had inhalation injury and 7 (63.6%) died. Among 9 patients who did not use any catalyzer, 1 (11.1%) had inhalation injury and 4 (44.4%) died. In general, inhalation injury was diagnosed in 6 patients (30%) while 11 (55%) patients died. A high morbidity and mortality rate was found in patients who used a catalyzer. PMID:25692434

Defense Technical Information Center Thesaurus

DTIC Science & Technology

2000-10-01

acquisition radar 4 + Indicates existence of further generic levels of the term DTIC Thesaurus Actuators Acridines Actinide series (cont.) Activated sintering...BT Heterocyclic compounds+ Uranium+ BT Sintering Acrilan Actinide series compounds Activated sludge process use Acrylonitrile polymers RT Actinide...Waste treatment+ Protactinium compounds Acronyms Thorium compounds+ Activation use Abbreviations Transuranium compounds+ UF Energizing Uranium compounds

Abundance of live 244Pu in deep-sea reservoirs on Earth points to rarity of actinide nucleosynthesis

PubMed Central

Wallner, A.; Faestermann, T.; Feige, J.; Feldstein, C.; Knie, K.; Korschinek, G.; Kutschera, W.; Ofan, A.; Paul, M.; Quinto, F.; Rugel, G.; Steier, P.

2015-01-01

Half of the heavy elements including all actinides are produced in r-process nucleosynthesis, whose sites and history remain a mystery. If continuously produced, the Interstellar Medium is expected to build-up a quasi-steady state of abundances of short-lived nuclides (with half-lives ≤100 My), including actinides produced in r-process nucleosynthesis. Their existence in today’s interstellar medium would serve as a radioactive clock and would establish that their production was recent. In particular 244Pu, a radioactive actinide nuclide (half-life=81 My), can place strong constraints on recent r-process frequency and production yield. Here we report the detection of live interstellar 244Pu, archived in Earth’s deep-sea floor during the last 25 My, at abundances lower than expected from continuous production in the Galaxy by about 2 orders of magnitude. This large discrepancy may signal a rarity of actinide r-process nucleosynthesis sites, compatible with neutron-star mergers or with a small subset of actinide-producing supernovae. PMID:25601158

Utilization of Minor Actinides as a Fuel Component for Ultra-Long Life Bhr Configurations: Designs, Advantages and Limitations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Pavel V. Tsvetkov

2009-05-20

This project assessed the advantages and limitations of using minor actinides as a fuel component to achieve ultra-long life Very High Temperature Reactor (VHTR) configurations. Researchers considered and compared the capabilities of pebble-bed and prismatic core designs with advanced actinide fuels to achieve ultra-long operation without refueling. Since both core designs permit flexibility in component configuration, fuel utilization, and fuel management, it is possible to improve fissile properties of minor actinides by neutron spectrum shifting through configuration adjustments. The project studied advanced actinide fuels, which could reduce the long-term radio-toxicity and heat load of high-level waste sent to a geologicmore » repository and enable recovery of the energy contained in spent fuel. The ultra-long core life autonomous approach may reduce the technical need for additional repositories and is capable to improve marketability of the Generation IV VHTR by allowing worldwide deployment, including remote regions and regions with limited industrial resources. Utilization of minor actinides in nuclear reactors facilitates developments of new fuel cycles towards sustainable nuclear energy scenarios.« less

A Summary of Actinide Enrichment Technologies and Capability Gaps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, Bradley D.; Robinson, Sharon M.

2017-01-01

The evaluation performed in this study indicates that a new program is needed to efficiently provide a national actinide radioisotope enrichment capability to produce milligram-to-gram quantities of unique materials for user communities. This program should leverage past actinide enrichment, the recent advances in stable isotope enrichment, and assessments of the future requirements to cost effectively develop this capability while establishing an experience base for a new generation of researchers in this vital area. Preliminary evaluations indicate that an electromagnetic isotope separation (EMIS) device would have the capability to meet the future needs of the user community for enriched actinides. Themore » EMIS technology could be potentially coupled with other enrichment technologies, such as irradiation, as pre-enrichment and/or post-enrichment systems to increase the throughput, reduce losses of material, and/or reduce operational costs of the base EMIS system. Past actinide enrichment experience and advances in the EMIS technology applied in stable isotope separations should be leveraged with this new evaluation information to assist in the establishment of a domestic actinide radioisotope enrichment capability.« less

The role of the 5f valence orbitals of early actinides in chemical bonding

PubMed Central

Vitova, T.; Pidchenko, I.; Fellhauer, D.; Bagus, P. S.; Joly, Y.; Pruessmann, T.; Bahl, S.; Gonzalez-Robles, E.; Rothe, J.; Altmaier, M.; Denecke, M. A.; Geckeis, H.

2017-01-01

One of the long standing debates in actinide chemistry is the level of localization and participation of the actinide 5f valence orbitals in covalent bonds across the actinide series. Here we illuminate the role of the 5f valence orbitals of uranium, neptunium and plutonium in chemical bonding using advanced spectroscopies: actinide M4,5 HR-XANES and 3d4f RIXS. Results reveal that the 5f orbitals are active in the chemical bonding for uranium and neptunium, shown by significant variations in the level of their localization evidenced in the spectra. In contrast, the 5f orbitals of plutonium appear localized and surprisingly insensitive to different bonding environments. We envisage that this report of using relative energy differences between the 5fδ/ϕ and 5fπ*/5fσ* orbitals as a qualitative measure of overlap-driven actinyl bond covalency will spark activity, and extend to numerous applications of RIXS and HR-XANES to gain new insights into the electronic structures of the actinide elements. PMID:28681848

The role of the 5f valence orbitals of early actinides in chemical bonding

NASA Astrophysics Data System (ADS)

Vitova, T.; Pidchenko, I.; Fellhauer, D.; Bagus, P. S.; Joly, Y.; Pruessmann, T.; Bahl, S.; Gonzalez-Robles, E.; Rothe, J.; Altmaier, M.; Denecke, M. A.; Geckeis, H.

2017-07-01

One of the long standing debates in actinide chemistry is the level of localization and participation of the actinide 5f valence orbitals in covalent bonds across the actinide series. Here we illuminate the role of the 5f valence orbitals of uranium, neptunium and plutonium in chemical bonding using advanced spectroscopies: actinide M4,5 HR-XANES and 3d4f RIXS. Results reveal that the 5f orbitals are active in the chemical bonding for uranium and neptunium, shown by significant variations in the level of their localization evidenced in the spectra. In contrast, the 5f orbitals of plutonium appear localized and surprisingly insensitive to different bonding environments. We envisage that this report of using relative energy differences between the 5fδ/φ and 5fπ*/5fσ* orbitals as a qualitative measure of overlap-driven actinyl bond covalency will spark activity, and extend to numerous applications of RIXS and HR-XANES to gain new insights into the electronic structures of the actinide elements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selle, J E

Attempts were made to apply the Kaufman method of calculating binary phase diagrams to the calculation of binary phase diagrams between the rare earths, actinides, and the refractory transition metals. Difficulties were encountered in applying the method to the rare earths and actinides, and modifications were necessary to provide accurate representation of known diagrams. To calculate the interaction parameters for rare earth-rare earth diagrams, it was necessary to use the atomic volumes for each of the phases: liquid, body-centered cubic, hexagonal close-packed, and face-centered cubic. Determination of the atomic volumes of each of these phases for each element is discussedmore » in detail. In some cases, empirical means were necessary. Results are presented on the calculation of rare earth-rare earth, rare earth-actinide, and actinide-actinide diagrams. For rare earth-refractory transition metal diagrams and actinide-refractory transition metal diagrams, empirical means were required to develop values for the enthalpy of vaporization for rare earth elements and values for the constant (C) required when intermediate phases are present. Results of using the values determined for each element are presented.« less

A Goniometry Paradigm Shift to Measure Burn Scar Contracture in Burn Patients

DTIC Science & Technology

2017-10-01

test more extensively a recently designed Revised Goniometry (RG) method and compare it to Standard Goniometry (SG)used to measure burn scar...joint angle measurements willbe found between SG techniques compared to RG techniques which incorporate CKM and CFU principles. Specific Aim 1: To... compare the average reduction in joint range of motion measured with the standard GM measurements to a newly conceived set of revised GM measurements in

Actinide bioimaging in tissues: Comparison of emulsion and solid track autoradiography techniques with the iQID camera

PubMed Central

Miller, Brian W.; Van der Meeren, Anne; Tazrart, Anissa; Angulo, Jaime F.; Griffiths, Nina M.

2017-01-01

This work presents a comparison of three autoradiography techniques for imaging biological samples contaminated with actinides: emulsion-based, plastic-based autoradiography and a quantitative digital technique, the iQID camera, based on the numerical analysis of light from a scintillator screen. In radiation toxicology it has been important to develop means of imaging actinide distribution in tissues as these radionuclides may be heterogeneously distributed within and between tissues after internal contamination. Actinide distribution determines which cells are exposed to alpha radiation and is thus potentially critical for assessing absorbed dose. The comparison was carried out by generating autoradiographs of the same biological samples contaminated with actinides with the three autoradiography techniques. These samples were cell preparations or tissue sections collected from animals contaminated with different physico-chemical forms of actinides. The autoradiograph characteristics and the performances of the techniques were evaluated and discussed mainly in terms of acquisition process, activity distribution patterns, spatial resolution and feasibility of activity quantification. The obtained autoradiographs presented similar actinide distribution at low magnification. Out of the three techniques, emulsion autoradiography is the only one to provide a highly-resolved image of the actinide distribution inherently superimposed on the biological sample. Emulsion autoradiography is hence best interpreted at higher magnifications. However, this technique is destructive for the biological sample. Both emulsion- and plastic-based autoradiography record alpha tracks and thus enabled the differentiation between ionized forms of actinides and oxide particles. This feature can help in the evaluation of decorporation therapy efficacy. The most recent technique, the iQID camera, presents several additional features: real-time imaging, separate imaging of alpha particles and gamma rays, and alpha activity quantification. The comparison of these three autoradiography techniques showed that they are complementary and the choice of the technique depends on the purpose of the imaging experiment. PMID:29023595

Method for recovery of actinides from refractory oxides thereof using O.sub. F.sub.2

DOEpatents

Asprey, Larned B.; Eller, Phillip G.

1988-01-01

Method for recovery of actinides from nuclear waste material containing sintered and other oxides thereof using O.sub.2 F.sub.2 to generate the hexafluorides of the actinides present therein. The fluorinating agent, O.sub.2 F.sub.2, has been observed to perform the above-described tasks at sufficiently low temperatures that there is virtually no damage to the containment vessels. Moreover, the resulting actinide hexafluorides are not destroyed by high temperature reactions with the walls of the reaction vessel. Dioxygen difluoride is readily prepared, stored and transferred to the place of reaction.

Impacts of coal burning on ambient PM2.5 pollution in China

NASA Astrophysics Data System (ADS)

Ma, Qiao; Cai, Siyi; Wang, Shuxiao; Zhao, Bin; Martin, Randall V.; Brauer, Michael; Cohen, Aaron; Jiang, Jingkun; Zhou, Wei; Hao, Jiming; Frostad, Joseph; Forouzanfar, Mohammad H.; Burnett, Richard T.

2017-04-01

High concentration of fine particles (PM2.5), the primary concern about air quality in China, is believed to closely relate to China's large consumption of coal. In order to quantitatively identify the contributions of coal combustion in different sectors to ambient PM2. 5, we developed an emission inventory for the year 2013 using up-to-date information on energy consumption and emission controls, and we conducted standard and sensitivity simulations using the chemical transport model GEOS-Chem. According to the simulation, coal combustion contributes 22 µg m-3 (40 %) to the total PM2. 5 concentration at national level (averaged in 74 major cities) and up to 37 µg m-3 (50 %) in the Sichuan Basin. Among major coal-burning sectors, industrial coal burning is the dominant contributor, with a national average contribution of 10 µg m-3 (17 %), followed by coal combustion in power plants and the domestic sector. The national average contribution due to coal combustion is estimated to be 18 µg m-3 (46 %) in summer and 28 µg m-3 (35 %) in winter. While the contribution of domestic coal burning shows an obvious reduction from winter to summer, contributions of coal combustion in power plants and the industrial sector remain at relatively constant levels throughout the year.

Rapid determination of actinides in seawater samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.

2014-03-09

A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti +3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were usedmore » to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1–2 weeks and provide chemical yields of ~30–60 %. This new sample preparation method can be performed in 4–8 h with tracer yields of ~85–95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort.« less

Ten-year epidemiology of chemical burns in western Zhejiang Province, China.

PubMed

Ye, Chunjiang; Wang, Xingang; Zhang, Yuanhai; Ni, Liangfang; Jiang, Ruiming; Liu, Liping; Han, Chunmao

2016-05-01

Chemical burns occur frequently in western Zhejiang Province. This study documents the epidemiology of chemical burns in the region using burn data from a local specialized hospital. Results from this analysis will assist in the planning of prevention strategies for high-risk occupations and groups. A 10-year retrospective analysis was conducted for all patients with chemical burns admitted to the Department of Burn and Plastic Surgery from January 2004 to December 2013. Information obtained for each patient included demographics (gender, age, occupation and education), location of the burn, cause of the burn, and categories of chemicals. Data regarding the season of admittance, prehospital treatment, wound site/size (area, region, and depth), accompanying injuries, operations, length of hospital stay and mortality were also assessed. A total of 690 patients (619 males, 71 females; average age: 30.6±12.4 years) were admitted to the department for chemical burns. Over the 10-year period, the incidence of chemical burns showed an increasing tendency. Chemical burns occurred most frequently in patients aged 20-59 years (94.79%). Most of the chemical burns were work-related, primarily in private enterprises (47.97%) and state-owned enterprises (24.93%). Operations (68.99%) and machine problems (17.26%) were the main causes of chemical burns in the workplace. With regard to burns caused by chemicals, most were caused by acids (72.01%), with hydrofluoric acid and sulphuric acid causing 51.45%. Most chemical burns occurred in the summer and autumn seasons (61.02%). The burn size was <10% of the total body surface area (TBSA) for 445 patients (64.49%), while only 26 patients (3.76%) had burns covering >40% TBSA. The most common burn sites were the upper extremities (31.57%), lower extremities (19.86%), and head and neck (28.83%). Most patients (581 (84.20%)) received water washing treatment on site immediately after exposure. The most common accompanying injuries included inhalation injury, ocular burns and digestive tract injury. The average hospital stay was 17.0±23.1 days (range 1-333 days). Surgery was performed in 146 patients (21.16%), and the overall mortality rate was 0.58%. Chemical burns are preventable. The high morbidity of chemical burns in western Zhejiang Province is related to the industrial structure of the area. Governmental management in the fields of production, transportation, and utilization of chemicals could be improved. Workplaces have the responsibility to provide safe work environments and equipment, as well as occupational education and safety training for high-risk work groups. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Final Report on Two-Stage Fast Spectrum Fuel Cycle Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Won Sik; Lin, C. S.; Hader, J. S.

2016-01-30

This report presents the performance characteristics of two “two-stage” fast spectrum fuel cycle options proposed to enhance uranium resource utilization and to reduce nuclear waste generation. One is a two-stage fast spectrum fuel cycle option of continuous recycle of plutonium (Pu) in a fast reactor (FR) and subsequent burning of minor actinides (MAs) in an accelerator-driven system (ADS). The first stage is a sodium-cooled FR fuel cycle starting with low-enriched uranium (LEU) fuel; at the equilibrium cycle, the FR is operated using the recovered Pu and natural uranium without supporting LEU. Pu and uranium (U) are co-extracted from the dischargedmore » fuel and recycled in the first stage, and the recovered MAs are sent to the second stage. The second stage is a sodium-cooled ADS in which MAs are burned in an inert matrix fuel form. The discharged fuel of ADS is reprocessed, and all the recovered heavy metals (HMs) are recycled into the ADS. The other is a two-stage FR/ADS fuel cycle option with MA targets loaded in the FR. The recovered MAs are not directly sent to ADS, but partially incinerated in the FR in order to reduce the amount of MAs to be sent to the ADS. This is a heterogeneous recycling option of transuranic (TRU) elements« less

Comparative analysis of thorium and uranium fuel for transuranic recycle in a sodium cooled Fast Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

C. Fiorina; N. E. Stauff; F. Franceschini

2013-12-01

The present paper compares the reactor physics and transmutation performance of sodium-cooled Fast Reactors (FRs) for TRansUranic (TRU) burning with thorium (Th) or uranium (U) as fertile materials. The 1000 MWt Toshiba-Westinghouse Advanced Recycling Reactor (ARR) conceptual core has been used as benchmark for the comparison. Both burner and breakeven configurations sustained or started with a TRU supply, and assuming full actinide homogeneous recycle strategy, have been developed. State-of-the-art core physics tools have been employed to establish fuel inventory and reactor physics performances for equilibrium and transition cycles. Results show that Th fosters large improvements in the reactivity coefficients associatedmore » with coolant expansion and voiding, which enhances safety margins and, for a burner design, can be traded for maximizing the TRU burning rate. A trade-off of Th compared to U is the significantly larger fuel inventory required to achieve a breakeven design, which entails additional blankets at the detriment of core compactness as well as fuel manufacturing and separation requirements. The gamma field generated by the progeny of U-232 in the U bred from Th challenges fuel handling and manufacturing, but in case of full recycle, the high contents of Am and Cm in the transmutation fuel impose remote fuel operations regardless of the presence of U-232.« less

Actinide recovery process

DOEpatents

Muscatello, Anthony C.; Navratil, James D.; Saba, Mark T.

1987-07-28

Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrenedivinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like.

Improved method for extracting lanthanides and actinides from acid solutions

DOEpatents

Horwitz, E.P.; Kalina, D.G.; Kaplan, L.; Mason, G.W.

1983-07-26

A process for the recovery of actinide and lanthanide values from aqueous acidic solutions uses a new series of neutral bi-functional extractants, the alkyl(phenyl)-N,N-dialkylcarbamoylmethylphosphine oxides. The process is suitable for the separation of actinide and lanthanide values from fission product values found together in high-level nuclear reprocessing waste solutions.

Prompt fission neutron spectra of actinides

DOE PAGES

Capote, R.; Chen, Y. -J.; Hambsch, F. -J.; ...

2016-01-06

Here, the energy spectrum of prompt neutrons emitted in fission (PFNS) plays a very important role in nuclear science and technology. A Coordinated Research Project (CRP) "Evaluation of Prompt Fission Neutron Spectra of Actinides" was established by the IAEA Nuclear Data Section in 2009, with the major goal to produce new PFNS evaluations with uncertainties for actinide nuclei.

Actinide recovery process

DOEpatents

Muscatello, A.C.; Navratil, J.D.; Saba, M.T.

1985-06-13

Process for the removal of plutonium polymer and ionic actinides from aqueous solutions by absorption onto a solid extractant loaded on a solid inert support such as polystyrene-divinylbenzene. The absorbed actinides can then be recovered by incineration, by stripping with organic solvents, or by acid digestion. Preferred solid extractants are trioctylphosphine oxide and octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and the like. 2 tabs.

Process for making a ceramic composition for immobilization of actinides

DOEpatents

Ebbinghaus, Bartley B.; Van Konynenburg, Richard A.; Vance, Eric R.; Stewart, Martin W.; Walls, Philip A.; Brummond, William Allen; Armantrout, Guy A.; Herman, Connie Cicero; Hobson, Beverly F.; Herman, David Thomas; Curtis, Paul G.; Farmer, Joseph

2001-01-01

Disclosed is a process for making a ceramic composition for the immobilization of actinides, particularly uranium and plutonium. The ceramic is a titanate material comprising pyrochlore, brannerite and rutile. The process comprises oxidizing the actinides, milling the oxides to a powder, blending them with ceramic precursors, cold pressing the blend and sintering the pressed material.

Benefit of extracorporeal membrane oxygenation in major burns after stun grenade explosion: Experience from a single military medical center.

PubMed

Hsu, Po-Shun; Tsai, Yi-Ting; Lin, Chih-Yuan; Chen, Shyi-Gen; Dai, Niann-Tzyy; Chen, Cheng-Jung; Chen, Jia-Lin; Tsai, Chien-Sung

2017-05-01

Explosion injury is very common on the battlefield and is associated with major burn and inhalation injuries and subsequent high mortality and morbidity rates. Here we report six victims who suffered from explosion injuries caused by stun grenade; all were treated with extracorporeal membrane oxygenation (ECMO) as salvage therapy. This study was aimed to evaluate the indications and efficacy of ECMO in acute and critically ill major burn patients. This was a retrospective analysis of six patients from Tri-Service General Hospital, National Defense Medical Center in Taiwan. All suffered from major burns with 89.0±19.1% average of total body surface area over second degree (TBSA; range, 50-99%). ECMO was used due to inhalation injury in five patients and cardiogenic shock in one patient. The average interval to start ECMO was 26.5±19.0h (range, 14-63h). Venoarterial ECMO was used on in four patients due to unstable hemodynamic status, whereas venovenous ECMO was used in two patients for sustained hypoxemia. All patients had rhabdomyolysis with acute renal failure. The average duration of ECMO was 169.6±180.9h (range, 27-401h). All patients developed coagulopathy and needed debridement surgery during ECMO support, and five underwent torso escharotomy due to inspiratory compromise. Only one patient whose second and third degree burns covered 50% TBSA was successfully weaned from ECMO and survived; he was discharged after 221 hospital days. All patients who died had second and third degree burns covering over 90% of their TBSA. Three patients died of multiple organ failure, one died of septic shock, and the other died of cardiogenic shock. Overall survival rate was 16.7%. In acute and critically ill major burn patients, ECMO could be considered as a salvage therapy, particularly in those with inhalation injury and burn-related acute respiratory distress syndrome. However, ECMO does not seem to provide benefits for circulatory support in those with hemodynamic compromise. The use of ECMO in these patients is still investigational, as our data provided no benefit in terms of the outcomes or survival, particularly in those with more than 90% TBSA burns. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Quantum Chemical Studies of Actinides and Lanthanides: From Small Molecules to Nanoclusters

NASA Astrophysics Data System (ADS)

Vlaisavljevich, Bess

Research into actinides is of high interest because of their potential applications as an energy source and for the environmental implications therein. Global concern has arisen since the development of the actinide concept in the 1940s led to the industrial scale use of the commercial nuclear energy cycle and nuclear weapons production. Large quantities of waste have been generated from these processes inspiring efforts to address fundamental questions in actinide science. In this regard, the objective of this work is to use theory to provide insight and predictions into actinide chemistry, where experimental work is extremely challenging because of the intrinsic difficulties of the experiments themselves and the safety issues associated with this type of chemistry. This thesis is a collection of theoretical studies of actinide chemistry falling into three categories: quantum chemical and matrix isolation studies of small molecules, the electronic structure of organoactinide systems, and uranyl peroxide nanoclusters and other solid state actinide compounds. The work herein not only spans a wide range of systems size but also investigates a range of chemical problems. Various quantum chemical approaches have been employed. Wave function-based methods have been used to study the electronic structure of actinide containing molecules of small to middle-size. Among these methods, the complete active space self consistent field (CASSCF) approach with corrections from second-order perturbation theory (CASPT2), the generalized active space SCF (GASSCF) approach, and Moller-Plesset second-order perturbation theory (MP2) have been employed. Likewise, density functional theory (DFT) has been used along with analysis tools like bond energy decomposition, bond orders, and Bader's Atoms in Molecules. From these quantum chemical results, comparison with experimentally obtained structures and spectra are made.

Solid rocket motor fire tests: Phases 1 and 2

NASA Astrophysics Data System (ADS)

Chang, Yale; Hunter, Lawrence W.; Han, David K.; Thomas, Michael E.; Cain, Russell P.; Lennon, Andrew M.

2002-01-01

JHU/APL conducted a series of open-air burns of small blocks (3 to 10 kg) of solid rocket motor (SRM) propellant at the Thiokol Elkton MD facility to elucidate the thermal environment under burning propellant. The propellant was TP-H-3340A for the STAR 48 motor, with a weight ratio of 71/18/11 for the ammonium perchlorate, aluminum, and HTPB binder. Combustion inhibitor applied on the blocks allowed burning on the bottom and/or sides only. Burns were conducted on sand and concrete to simulate near-launch pad surfaces, and on graphite to simulate a low-recession surface. Unique test fixturing allowed propellant self-levitation while constraining lateral motion. Optics instrumentation consisted of a longwave infrared imaging pyrometer, a midwave spectroradiometer, and a UV/visible spectroradiometer. In-situ instrumentation consisted of rod calorimeters, Gardon gauges, elevated thermocouples, flush thermocouples, a two-color pyrometer, and Knudsen cells. Witness materials consisted of yttria, ceria, alumina, tungsten, iridium, and platinum/rhodium. Objectives of the tests were to determine propellant burn characteristics such as burn rate and self-levitation, to determine heat fluxes and temperatures, and to carry out materials analyses. A summary of qualitative results: alumina coated almost all surfaces, the concrete spalled, sand moisture content matters, the propellant self-levitated, the test fixtures worked as designed, and bottom-burning propellant does not self-extinguish. A summary of quantitative results: burn rate averaged 1.15 mm/s, thermocouples peaked at 2070 C, pyrometer readings matched MWIR data at about 2400 C, the volume-averaged plume temperatures were 2300-2400 C with peaks of 2400-2600 C, and the heat fluxes peaked at 125 W/cm2. These results are higher than other researchers' measurements of top-burning propellant in chimneys, and will be used, along with Phase 3 test results, to analyze hardware response to these environments, including General Purpose Heat Sources (GPHS) and Radioisotope Heater Units (RHU). Follow-on Phase 3 tests burning propellant blocks up to 90 kg will be briefly described. .

Religious Burning as a Major Source of Atmospheric Fine Aerosols in Lhasa city in the Tibetan Plateau

NASA Astrophysics Data System (ADS)

Liu, S.; Cui, Y.; Zhixuan, B.; Bian, J.; McKeen, S. A.; Watts, L. A.; Ciciora, S. J.; Gao, R. S.

2017-12-01

Measurements of aerosols in the Tibetan Plateau are scant due to the high altitude and harsh climate. To bridge this gap, we carried out the first field measurements of aerosol size distributions in Lhasa, a major city in the Tibetan Plateau that has been experiencing fast urbanization and reduced air quality. Aerosol number size distribution was continuously measured using an optical particle size spectrometer near the center of Lhasa city during the Asian summer monsoon season in 2016. The mass concentration of fine particles was modulated by boundary layer dynamics, with an average of 11 µg m-3 and the high values exceeding 50 µg m-3 during religious holidays. Daytime high concentration coincided with the religious burning of biomass and incense in the temples during morning hours, which produced heavy smoke. Factor analysis revealed a factor that is likely induced by religious burning. The factor contributed 34% of the campaign-average fine particle mass and the contribution reached up to 80% during religious holidays. The mass size distribution of aerosols produced from religious burnings peaked at 500 nm, indicating that these particles could efficiently decrease visibility and promote health risk. Because of its significance, our results suggest that more attention should be paid to religious burning, a currently under-studied source, in the Tibetan Plateau and in other regions of the world where religious burnings are frequently practiced.

Mixed conifer forest mortality and establishment before and after prescribed fire in Sequoia National Park, California

USGS Publications Warehouse

Mutch, L.S.; Parsons, D.J.

1998-01-01

Pre-and post-burn tree mortality rates, size structure, basal area, and ingrowth were determined for four 1.0 ha mixed conifer forest stands in the Log Creek and Tharp's Creek watersheds of Sequoia National Park. Mean annual mortality between 1986 and 1990 was 0.8% for both watersheds. In the fall of 1990, the Tharp's Creek watershed was treated with a prescribed burn. Between 1991 and 1995, mean annual mortality was 1.4% in the unburned Log Creek watershed and 17.2% in the burned Tharp's Creek watershed. A drought from 1987 to 1992 likely contributed to the mortality increase in the Log Creek watershed. The high mortality in the Tharp's Creek watershed was primarily related to crown scorch from the 1990 fire and was modeled with logistic regression for white fir (Abies concolor [Gord. and Glend.]) and sugar pine (Pinus lambertiana [Dougl.]). From 1989 to 1994, basal area declined an average of 5% per year in the burned Tharp's Creek watershed, compared to average annual increases of less than 1% per year in the unburned Log Creek watershed and in the Tharp's watershed prior to burning. Post-burn size structure was dramatically changed in the Tharp's Creek stands: 75% of trees ???50 cm and 25% of trees >50 cm were killed by the fire.

Aquacel(®) Ag dressing versus Acticoat™ dressing in partial thickness burns: a prospective, randomized, controlled study in 100 patients. Part 1: burn wound healing.

PubMed

Verbelen, Jozef; Hoeksema, Henk; Heyneman, Alexander; Pirayesh, Ali; Monstrey, Stan

2014-05-01

Studies comparing contemporary silver dressings in burns are scarce. In a prospective, randomized, controlled study, counting 50 patients/research group, we compared two frequently used silver dressings, Acticoat™ and Aquacel(®) Ag, in the management of partial thickness burns with a predicted healing time between 7 and 21 days as assessed by laser Doppler imaging between 48 and 72h after burn. Variables investigated were related to baseline research group characteristics, wound healing, bacteriology, economics, nurse, and patient experience. Both research groups were comparably composed taking into account gender, age and burn characteristics. Similar results were obtained as to healing time and bacterial control with both silver dressings. A statistically significant difference in favor of the Aquacel(®) Ag dressing was found for average ease of use (p<0.001), average ease of application (p=0.001), patient pain (p<0.001), patient comfort with the dressing (p=0.017), silver staining (p<0.001), and cost effectiveness (p<0.001). Both silver dressings resulted in comparable healing times and bacterial control but the Aquacel(®) Ag dressing significantly increased comfort for patients as well as nurses and was significantly more cost-effective than the Acticoat™ dressing for the given indication. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Forest ecology and management

Treesearch

William D. Boyer; James H. Miller

1994-01-01

Over a period of 16 years, unburned longleaf pine (Pinus palustris Mill.) pole stands grew an average of 27% more volume than similar stands regularly burned. Treatments included biennial burns in winter, spring, and summer plus an unburned check, each of which was combined with three supplemental treatments, namely, initial herbicide injection of...

Measurement of Solid Rocket Propellant Burning Rate Using X-ray Imaging

NASA Astrophysics Data System (ADS)

Denny, Matthew D.

The burning rate of solid propellants can be difficult to measure for unusual burning surface geometries, but X-ray imaging can be used to measure burning rate. The objectives of this work were to measure the baseline burning rate of an electrically-controlled solid propellant (ESP) formulation with real-time X-ray radiography and to determine the uncertainty of the measurements. Two edge detection algorithms were written to track the burning surface in X-ray videos. The edge detection algorithms were informed by intensity profiles of simulated 2-D X-ray images. With a 95% confidence level, the burning rates measured by the Projected-Slope Intersection algorithm in the two combustion experiments conducted were 0.0839 in/s +/-2.86% at an average pressure of 407 psi +/-3.6% and 0.0882 in/s +/-3.04% at 410 psi +/-3.9%. The uncertainty percentages were based on the statistics of a Monte Carlo analysis on burning rate.

Epidemiology of burn injuries in Nepal: a systemic review.

PubMed

Tripathee, Sanjib; Basnet, Surendra Jung

2017-01-01

Burn is a global public health problem associated with significant morbidity and mortality, mostly in low- and middle-income countries. Southeast-Asian countries share a big burden of burn injuries, and Nepal is not an exception. We performed a systemic review to examine the epidemiological characteristics of burn injures in Nepal. Relevant epidemiological studies were identified through systemic search in PubMed, EMBASE, and Google Scholar. Reference lists from relevant review articles were also searched. Studies were included if they meet our selection criteria. Eight studies were included in our systemic review. Most of the burn victims belong to the working age group between 15-60 years old. Flame burns were found to be the most common cause of burn injury followed by scald burns, whereas scald burns were the most common cause of burn injury among the pediatric population. Most patients sustained less severe burn injuries, with home being the most common place of burn injury. The average hospital stay among the burn victims ranged from 13 to 60 days. Mortality among the burn victims ranged from 4.5 to 23.5%, with highest mortality among the flame burn patients. Developed nations have significantly reduced the burn incidence through effective intervention program. Although, burn injuries are the leading cause of morbidity and mortality in Nepal, effective intervention programs are lacking due to the limited epidemiological data related to burn injuries. Further large scale research is imperative to investigate the problem and assess the effectiveness of an intervention program.

The separation of lanthanides and actinides in supercritical fluid carbon dioxide

DOE PAGES

Mincher, Bruce J.; Wai, Chien M.; Fox, Robert V.; ...

2015-10-28

Supercritical fluid carbon dioxide presents an attractive alternative to conventional solvents for recovery of the actinides and lanthanides. Carbon dioxide is a good solvent for fluorine and phosphate-containing ligands, including the traditional tributylphosphate ligand used in process-scale uranium separations. Actinide and lanthanide oxides may even be directly dissolved in carbon dioxide containing the complexes formed between these ligands and mineral acids, obviating the need for large volumes of acids for leaching and dissolution, and the corresponding organic liquid–liquid solvent extraction solutions. As a result, examples of the application of this novel technology for actinide and lanthanide separations are presented.

Hydrothermal Synthesis and Crystal Structures of Actinide Compounds

NASA Astrophysics Data System (ADS)

Runde, Wolfgang; Neu, Mary P.

Since the 1950s actinides have been used to benefit industry, science, health, and national security. The largest industrial application, electricity generation from uranium and thorium fuels, is growing worldwide. Thus, more actinides are being mined, produced, used and processed than ever before. The future of nuclear energy hinges on how these increasing amounts of actinides are contained in each stage of the fuel cycle, including disposition. In addition, uranium and plutonium were built up during the Cold War between the United States and the Former Soviet Union for defense purposes and nuclear energy. These stockpiles have been significantly reduced in the last decade.

Nuclear waste forms for actinides

PubMed Central

Ewing, Rodney C.

1999-01-01

The disposition of actinides, most recently 239Pu from dismantled nuclear weapons, requires effective containment of waste generated by the nuclear fuel cycle. Because actinides (e.g., 239Pu and 237Np) are long-lived, they have a major impact on risk assessments of geologic repositories. Thus, demonstrable, long-term chemical and mechanical durability are essential properties of waste forms for the immobilization of actinides. Mineralogic and geologic studies provide excellent candidate phases for immobilization and a unique database that cannot be duplicated by a purely materials science approach. The “mineralogic approach” is illustrated by a discussion of zircon as a phase for the immobilization of excess weapons plutonium. PMID:10097054

Siderocalin-mediated recognition, sensitization, and cellular uptake of actinides.

PubMed

Allred, Benjamin E; Rupert, Peter B; Gauny, Stacey S; An, Dahlia D; Ralston, Corie Y; Sturzbecher-Hoehne, Manuel; Strong, Roland K; Abergel, Rebecca J

2015-08-18

Synthetic radionuclides, such as the transuranic actinides plutonium, americium, and curium, present severe health threats as contaminants, and understanding the scope of the biochemical interactions involved in actinide transport is instrumental in managing human contamination. Here we show that siderocalin, a mammalian siderophore-binding protein from the lipocalin family, specifically binds lanthanide and actinide complexes through molecular recognition of the ligands chelating the metal ions. Using crystallography, we structurally characterized the resulting siderocalin-transuranic actinide complexes, providing unprecedented insights into the biological coordination of heavy radioelements. In controlled in vitro assays, we found that intracellular plutonium uptake can occur through siderocalin-mediated endocytosis. We also demonstrated that siderocalin can act as a synergistic antenna to sensitize the luminescence of trivalent lanthanide and actinide ions in ternary protein-ligand complexes, dramatically increasing the brightness and efficiency of intramolecular energy transfer processes that give rise to metal luminescence. Our results identify siderocalin as a potential player in the biological trafficking of f elements, but through a secondary ligand-based metal sequestration mechanism. Beyond elucidating contamination pathways, this work is a starting point for the design of two-stage biomimetic platforms for photoluminescence, separation, and transport applications.

Gas core reactors for actinide transmutation and breeder applications

NASA Technical Reports Server (NTRS)

Clement, J. D.; Rust, J. H.

1978-01-01

This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

The R-Process Alliance: 2MASS J09544277+5246414, the Most Actinide-enhanced R-II Star Known

NASA Astrophysics Data System (ADS)

Holmbeck, Erika M.; Beers, Timothy C.; Roederer, Ian U.; Placco, Vinicius M.; Hansen, Terese T.; Sakari, Charli M.; Sneden, Christopher; Liu, Chao; Lee, Young Sun; Cowan, John J.; Frebel, Anna

2018-06-01

We report the discovery of a new actinide-boost star, 2MASS J09544277+5246414, originally identified as a very bright (V = 10.1), extremely metal-poor ([Fe/H] = ‑2.99) K giant in the LAMOST survey, and found to be highly r-process-enhanced (r-II; [Eu/Fe] = +1.28]), during the snapshot phase of the R-Process Alliance (RPA). Based on a high signal-to-noise ratio (S/N), high-resolution spectrum obtained with the Harlan J. Smith 2.7 m telescope, this star is the first confirmed actinide-boost star found by RPA efforts. With an enhancement of [Th/Eu] = +0.37, 2MASS J09544277+5246414 is also the most actinide-enhanced r-II star yet discovered, and only the sixth metal-poor star with a measured uranium abundance ([U/Fe] = +1.40). Using the Th/U chronometer, we estimate an age of 13.0 ± 4.7 Gyr for this star. The unambiguous actinide-boost signature of this extremely metal-poor star, combined with additional r-process-enhanced and actinide-boost stars identified by the RPA, will provide strong constraints on the nature and origin of the r-process at early times.

Crystal growth methods dedicated to low solubility actinide oxalates

NASA Astrophysics Data System (ADS)

Tamain, C.; Arab-Chapelet, B.; Rivenet, M.; Grandjean, S.; Abraham, F.

2016-04-01

Two novel crystal growth syntheses dedicated to low solubility actinide-oxalate systems and adapted to glove box handling are described. These methods based on the use of precursors of either actinide metal or oxalic acid have been optimized on lanthanide systems (analogue of actinides(III)) and then assessed on real actinide systems. They allow the synthesis of several actinide oxalate single crystals, Am2(C2O4)3(H2O)3·xH2O, Th(C2O4)2·6H2O, M2+x[PuIV2-xPuIIIx(C2O4)5]·nH2O and M1-x[PuIII1-xPuIVx(C2O4)2·H2O]·nH2O. It is the first time that these well-known compounds are formed by crystal growth methods, thus enabling direct structural studies on transuranic element systems and acquisition of basic data beyond deductions from isomorphic (or not) lanthanide compounds. Characterizations by X-ray diffraction, UV-visible solid spectroscopy, demonstrate the potentialities of these two crystal growth methods to obtain oxalate compounds.

Siderocalin-mediated recognition, sensitization, and cellular uptake of actinides

PubMed Central

Allred, Benjamin E.; Rupert, Peter B.; Gauny, Stacey S.; An, Dahlia D.; Ralston, Corie Y.; Sturzbecher-Hoehne, Manuel; Strong, Roland K.; Abergel, Rebecca J.

2015-01-01

Synthetic radionuclides, such as the transuranic actinides plutonium, americium, and curium, present severe health threats as contaminants, and understanding the scope of the biochemical interactions involved in actinide transport is instrumental in managing human contamination. Here we show that siderocalin, a mammalian siderophore-binding protein from the lipocalin family, specifically binds lanthanide and actinide complexes through molecular recognition of the ligands chelating the metal ions. Using crystallography, we structurally characterized the resulting siderocalin–transuranic actinide complexes, providing unprecedented insights into the biological coordination of heavy radioelements. In controlled in vitro assays, we found that intracellular plutonium uptake can occur through siderocalin-mediated endocytosis. We also demonstrated that siderocalin can act as a synergistic antenna to sensitize the luminescence of trivalent lanthanide and actinide ions in ternary protein–ligand complexes, dramatically increasing the brightness and efficiency of intramolecular energy transfer processes that give rise to metal luminescence. Our results identify siderocalin as a potential player in the biological trafficking of f elements, but through a secondary ligand-based metal sequestration mechanism. Beyond elucidating contamination pathways, this work is a starting point for the design of two-stage biomimetic platforms for photoluminescence, separation, and transport applications. PMID:26240330

Quantification of Cation Sorption to Engineered Barrier Materials Under Extreme Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Brian; Schlautman, Mark; Rao, Linfeng

The objective of this research is to examine mechanisms and thermodynamics of actinide sorption to engineered barrier materials (iron (oxyhydr)oxides and bentonite clay) for nuclear waste repositories under high temperature and high ionic strength conditions using a suite of macroscopic and microscopic techniques which will be coupled with interfacial reaction models. Gaining a mechanistic understanding of interfacial processes governing the sorption/sequestration of actinides at mineral-water interfaces is fundamental for the accurate prediction of actinide behavior in waste repositories. Although macroscale sorption data and various spectroscopic techniques have provided valuable information regarding speciation of actinides at solid-water interfaces, significant knowledge gapsmore » still exist with respect to sorption mechanisms and the ability to quantify sorption, particularly at high temperatures and ionic strengths. This objective is addressed through three major tasks: (1) influence of oxidation state on actinide sorption to iron oxides and clay minerals at elevated temperatures and ionic strengths; (2) calorimetric titrations of actinide-mineral suspensions; (3) evaluation of bentonite performance under repository conditions. The results of the work will include a qualitative conceptual model and a quantitative thermodynamic speciation model describing actinide partitioning to minerals and sediments, which is based upon a mechanistic understanding of specific sorption processes as determined from both micro-scale and macroscale experimental techniques. The speciation model will be a thermodynamic aqueous and surface complexation model of actinide interactions with mineral surfaces that is self-consistent with macroscopic batch sorption data, calorimetric and potentiometric titrations, X-ray absorption Spectroscopy (XAS, mainly Extended X-ray Absorption Fine Structure (EXAFS)), and electron microscopy analyses. The novelty of the proposed work lies largely in the unique system conditions which will be examined (i.e. elevated temperature and ionic strength) and the manner in which the surface complexation model will be developed in terms of specific surface species identified using XAS. These experiments will thus provide a fundamental understanding of the chemical and physical processes occurring at the solid-solution interface under expected repository conditions. Additionally, the focus on thermodynamic treatment of actinide ion interactions with minerals as proposed will provide information on the driving forces involved and contribute to the overall understanding of the high affinity many actinide ions have for oxide surfaces. The utility of this model will be demonstrated in this work through a series of advective and diffusive flow experiments.« less

Carbon and Water Vapor Fluxes of Different Ecosystems in Oklahoma

NASA Astrophysics Data System (ADS)

Wagle, P.; Gowda, P. H.; Northup, B. K.

2016-12-01

Information on exchange of energy, carbon dioxide (CO2), and water vapor (H2O) for major terrestrial ecosystems is vital to quantify carbon and water balances on a large-scale. It is also necessary to develop, test, and improve crop models and satellite-based production efficiency and evapotranspiration (ET) models, and to better understand the potential of terrestrial ecosystems to mitigate rising atmospheric CO2 concentration and climate change. A network (GRL-FLUXNET) of nine eddy flux towers has been established over a diverse range of terrestrial ecosystems, including native and improved perennial grasslands [unburned and grazed tallgrass prairie, burned and grazed tallgrass prairie, and burned Bermuda grass (Cynodon dactylon L.)], grazed and non-grazed winter wheat (Triticum aestivum L.), till and no-till winter wheat and canola (Brassica napus L.), alfalfa (Medicago sativa L.), and soybean (Glycine max L.), at the USDA-ARS, Grazinglands Research Laboratory, El Reno, OK. In this presentation, we quantify and compare net ecosystem CO2 exchange (NEE) and ET between recently burned and grazed tallgrass prairie and burned and non-grazed Bermuda grass pastures, alfalfa, and soybean. Preliminary results show monthly ensembles average NEE reached seasonal peak values of -29, -35, -25, and -20 µmol m-2 s-1 in burned tallgrass prairie pasture, burned Bermuda grass pasture, alfalfa, and soybean, respectively. Similarly, monthly ensembles average ET reached seasonal peak values of 0.22, 0.27, 0.25, 0.28 mm 30-min-1 in burned tallgrass prairie pasture, burned Bermuda grass pasture, alfalfa, and soybean, respectively. Seasonal patterns and daily magnitudes of NEE and ET and their responses to the similar climatic conditions will be further investigated.

Hemodynamic responses to dexmedetomidine in critically injured intubated pediatric burned patients: a preliminary study.

PubMed

Shank, Erik S; Sheridan, Robert L; Ryan, Colleen M; Keaney, Timothy J; Martyn, J A Jeevendra

2013-01-01

Because of ineffectiveness and tolerance to benzodiazepines and opioids developing with time, drugs acting via other receptor systems (eg, α-2 agonists) have been advocated in burn patients to improve sedation and analgesia. This study in severely burned pediatric subjects examined the hemodynamic consequences of dexmedetomidine (Dex) administration. Eight intubated patients with ≥20 to 79% TBSA burns were studied between 7 and 35 days after injury. After baseline measurements of mean arterial blood pressure and heart rhythm were taken, each patient received a 1.0 µg/kg bolus of Dex followed by an ascending dose infusion protocol (0.7-2.5 µg/kg/hr), with each dose administered for 15 minutes. There was significant hypotension (27±7.5%, average drop in mean arterial pressure [MAP] ± SD), and a decrease in heart rate (HR; 19% ± 7, average drop in HR ± SD). The average HR decreased from 146 beats per minute to 120. No bradycardia (HR < 60) or heart blocks were observed. In three patients, the MAP decreased to <50mm Hg with the bolus dose of Dex. Of the remaining five patients, three patients completed the study receiving the highest infusion dose of Dex (2.5 µg/kg/hr), whereas in 2 patients the infusion part of the study was begun, but the study was stopped due to persistent hypotension (MAP < 50mm Hg). These observations indicate that a bolus dose of Dex (1.0 µg/kg for 10 minutes) and high infusion rates may require fluid resuscitation or vasopressor support to maintain normotension in critically injured pediatric burn patients.

LLNL SFA OBER SBR FY17 Program Management and Performance Report: Subsurface Biogeochemistry of Actinides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kersting, Annie B.

A major scientific challenge in environmental sciences is to identify the dominant processes controlling actinide transport in the environment. It is estimated that currently, over 2200 metric tons of anthropogenic plutonium (Pu) has accumulated worldwide, a number that increases yearly with additional spent nuclear fuel (Ewing et al., 2010). Plutonium has been shown to migrate on the scale of kilometers, giving way to a critical concern that the fundamental biogeochemical processes that control its behavior in the subsurface are not well understood (Kersting et al. 1999; Novikov et al. 2006; Santschi et al. 2002). Neptunium (Np) is less prevalent inmore » the environment; however, it is predicted to be a significant long-term dose contributor in high-level nuclear waste. Our focus on Np chemistry in this Science Plan is intended to help formulate a better understanding of Pu redox transformations in the environment and clarify the differences between the two long-lived actinides. The research approach of our Science Plan combines (1) Fundamental Mechanistic Studies that identify and quantify biogeochemical processes that control actinide behavior in solution and on solids, (2) Field Integration Studies that investigate the transport characteristics of Pu and test our conceptual understanding of actinide transport, and (3) Actinide Research Capabilities that allow us to achieve the objectives of this Scientific Focus Area (SFA) and provide new opportunities for advancing actinide environmental chemistry. These three Research Thrusts form the basis of our SFA Science Program.« less

Enhancing the actinide sciences in Europe through hot laboratories networking and pooling: from ACTINET to TALISMAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bourg, S.; Poinssot, C.

2013-07-01

Since 2004, Europe supports the strengthening of the European actinides sciences scientific community through the funding of dedicated networks: (i) from 2004 to 2008, the ACTINET6 network of excellence (6. Framework Programme) gathered major laboratories involved in nuclear research and a wide range of academic research organisations and universities with the specific aims of funding and implementing joint research projects to be performed within the network of pooled facilities; (ii) from 2009 to 2013, the ACTINET-I3 integrated infrastructure initiative (I3) supports the cost of access of any academics in the pooled EU hot laboratories. In this continuation, TALISMAN (Trans-national Accessmore » to Large Infrastructures for a Safe Management of Actinides) gathers now the main European hot laboratories in actinides sciences in order to promote their opening to academics and universities and strengthen the EU-skills in actinides sciences. Furthermore, a specific focus is set on the development of advanced cutting-edge experimental and spectroscopic capabilities, the combination of state-of-the art experimental with theoretical first-principle methods on a quantum mechanical level and to benefit from the synergy between the different scientific and technical communities. ACTINET-I3 and TALISMAN attach a great importance and promote the Education and Training of the young generation of actinides scientists in the Trans-national access but also by organizing Schools (general Summer Schools or Theoretical User Lab Schools) or by granting students to attend International Conference on actinide sciences. (authors)« less

Characterization of carbonaceous materials in PM2.5 and PM10 size fractions in Morogoro, Tanzania, during 2006 wet season campaign

NASA Astrophysics Data System (ADS)

Mkoma, Stelyus L.; Chi, Xuguang; Maenhaut, Willy

2010-05-01

Atmospheric aerosol samples in PM10 and PM2.5 size fractions were collected in parallel at a rural site in Morogoro during wet season in March and April 2006. All samples were analysed for the particulate matter mass, for organic, elemental, and total carbon (OC, EC, and TC), and for water-soluble OC (WSOC). The average PM10 and PM2.5 mass concentrations and associated standard deviations were 14 ± 13 μg/m 3 and 7.3 ± 4 μg/m 3 respectively. On average, TC accounted for 33% of the PM10 mass and 44% of the PM2.5 mass for the campaign. The average OC/PM percentage ratios were 27% and 33% in PM10 and PM2.5 size fractions respectively and a larger fraction of the OC was water-soluble. The observed low EC/TC mean percentage ratios of 10-14% respectively for PM10 and PM2.5 fractions indicate that the carbonaceous aerosol originates mainly from biogenic aerosols and/or biomass burning. A simple source apportionment approach was used to apportion the OC to biofuel and charcoal burning. On average, 93% of the PM10 OC was attributed to biofuel and 7% to charcoal burning in the 2006 wet season campaign. However, it is suggested that a contribution to the OC at Morogoro could also come from other natural biogenic matter, and/or biomass burning aerosols. The results for the sources of OC at Morogoro should therefore be considered with great caution.

Numerical Simulation of Turbulent Combustion Using Vortex Methods

DTIC Science & Technology

1988-09-27

laminar burning velocity times the flame length measured along the line of maximum reaction rate. Following the burning of the eddy core, the strain...is approximately the same as the flame length at t - 0. In the second stage, and as the eddy starts to roll up, the flame front forms a fold within the...Rp, which is the slope of the curve in Fig. 9, can be approximated by the product of the flame length times the average burning velocity along the

[Nitrogen balance assessment in burn patients].

PubMed

Beça, Andreia; Egipto, Paula; Carvalho, Davide; Correia, Flora; Oliveira, Bruno; Rodrigues, Acácio; Amarante, José; Medina, J Luís

2010-01-01

The burn injury probably represents the largest stimulus for muscle protein catabolism. This state is characterized by an accelerated catabolism of the lean or skeletal mass that results in a clinical negative balance of nitrogen and muscle wasting. The determination of an appropriate value for protein intake is essential, since it is positively related to the nitrogen balance (NB) and accordingly several authors argue that a positive NB is the key parameter associated with nutritional improvement of a burn patient. Evaluation of the degree of protein catabolism by assessment of the Nitrogen Balance; Defining of nutritional support (protein needs) to implement in patients with burned surface area (BSA) = 10%. We prospectively evaluated the clinical files and scrutinized the clinical variables of interest. The NB was estimated according to three formulae. Each gram of nitrogen calculated by the NB was then converted into grams of protein, subtracted or added to protein intake (or administered enteric or parenterically) and divided by kg of reference Weight (kg Rweight), in an attempt to estimate the daily protein needs. The cohort consisted of 10 patients, 6 females, with average age of 58(23) years old, a mean of BSA of 21.4(8.4)%, ranging from a minimum of 10.0% and máximum of 35.0%. On average, patients were 58 (23) years old. The average number of days of hospitalization in the burn unit was 64.8(36.5) days. We observed significant differences between the 3 methods used for calculating the NB (p = 0.004), on average the NB was positive. When the formula A was used the average value of NB was higher. Regarding the attempt to estimate the needs of g prot/kg Rweight/day most of the values did not exceed, on average, 2.6 g Prot/kg Rweight/day and no significant differences between patients with a BSA% of 10-20% and with BSA% > 20% were found. Despite being able to estimate the protein catabolism through these formulas and verifying that most values were above zero, wide individual fluctuations were visible over time. Based on the sample reference that recommends a value of 1.5-2 g Prot/kg Rweight/day, we can conclude it to be underestimated, when comparing with the mean value of 2.6 g Prot/kg Rweight/day we established.

PREPARATION OF ACTINIDE-ALUMINUM ALLOYS

DOEpatents

Moore, R.H.

1962-09-01

BS>A process is given for preparing alloys of aluminum with plutonium, uranium, and/or thorium by chlorinating actinide oxide dissolved in molten alkali metal chloride with hydrochloric acid, chlorine, and/or phosgene, adding aluminum metal, and passing air and/or water vapor through the mass. Actinide metal is formed and alloyed with the aluminum. After cooling to solidification, the alloy is separated from the salt. (AEC)

Transmutation of actinides in power reactors.

PubMed

Bergelson, B R; Gerasimov, A S; Tikhomirov, G V

2005-01-01

Power reactors can be used for partial short-term transmutation of radwaste. This transmutation is beneficial in terms of subsequent storage conditions for spent fuel in long-term storage facilities. CANDU-type reactors can transmute the main minor actinides from two or three reactors of the VVER-1000 type. A VVER-1000-type reactor can operate in a self-service mode with transmutation of its own actinides.

PRODUCTION OF ACTINIDE METAL

DOEpatents

Knighton, J.B.

1963-11-01

A process of reducing actinide oxide to the metal with magnesium-zinc alloy in a flux of 5 mole% of magnesium fluoride and 95 mole% of magnesium chloride plus lithium, sodium, potassium, calcium, strontium, or barium chloride is presented. The flux contains at least 14 mole% of magnesium cation at 600-- 900 deg C in air. The formed magnesium-zinc-actinide alloy is separated from the magnesium-oxide-containing flux. (AEC)

Actinide geochemistry: from the molecular level to the real system.

PubMed

Geckeis, Horst; Rabung, Thomas

2008-12-12

Geochemical processes leading to either mobilization or retention of radionuclides in an aquifer system are significantly influenced by their interaction with rock, sediment and colloid surfaces. Therefore, a sound safety assessment of nuclear waste disposal requires the elucidation and quantification of those processes. State-of-the-art analytical techniques as e.g. laser- and X-ray spectroscopy are increasingly applied to study solid-liquid interface reactions to obtain molecular level speciation insight. We have studied the sorption of trivalent lanthanides and actinides onto aluminium oxides, hydroxides and purified clay minerals by the time-resolved laser fluorescence spectroscopy and X-ray-absorption spectroscopy. Chemical constitution and structure of surface bound actinides are proposed based on spectroscopic information. Open questions still remain with regard to the exact nature of mineral surface ligands and the mineral/water interface. Similarities of spectroscopic data obtained for M(III) sorbed onto gamma-alumina, and clay minerals suggest the formation of very comparable inner-sphere surface complexes such as S-O-An(III)(OH)x(2-x)(H2O)5-x at pH > 5. Those speciation data are found consistent with those predicted by surface complexation modelling. The applicability of data obtained for pure mineral phases to actinide sorption onto heterogeneously composed natural clay rock is examined by experiments and by geochemical modelling. Good agreement of experiment and model calculations is found for U(VI) and trivalent actinide/lanthanide sorption to natural clay rock. The agreement of spectroscopy, geochemical modelling and batch experiments with natural rock samples and purified minerals increases the reliability in model predictions. The assessment of colloid borne actinide migration observed in various laboratory and field studies calls for detailed information on actinide-colloid interaction. Kinetic stabilization of colloid bound actinides can be due to inclusion into inorganic colloid matrix or by macromolecular rearrangement in case of organic, humic/fulvic like colloids. Only a combination of spectroscopy, microscopy and classical batch sorption experiments can help to elucidate the actinide-colloid interaction mechanisms and thus contribute to the assessment of colloids for radionuclide migration.

New cubic structure compounds as actinide host phases

NASA Astrophysics Data System (ADS)

Stefanovsky, S. V.; Yudintsev, S. V.; Livshits, T. S.

2010-03-01

Various compounds with fluorite (cubic zirconia) and fluorite-derived (pyrochlore, zirconolite) structures are considered as promising actinide host phases at immobilization of actinide-bearing nuclear wastes. Recently some new cubic compounds — stannate and stannate-zirconate pyrochlores, murataite and related phases, and actinide-bearing garnet structure compounds were proposed as perspective matrices for complex actinide wastes. Zirconate pyrochlore (ideally Gd2Zr2O7) has excellent radiation resistance and high chemical durability but requires high temperatures (at least 1500 °C) to be produced by hot-pressing from sol-gel derived precursor. Partial Sn4+ substitution for Zr4+ reduces production temperature and the compounds REE2ZrSnO7 may be hot-pressed or cold pressed and sintered at ~1400 °C. Pyrochlore, A2B2O7-x (two-fold elementary fluorite unit cell), and murataite, A3B6C2O20-y (three-fold fluorite unit cell), are end-members of the polysomatic series consisting of the phases whose structures are built from alternating pyrochlore and murataite blocks (nano-sized modules) with seven- (2C/3C/2C), five- (2C/3C), eight- (3C/2C/3C) and three-fold (3C — murataite) fluorite unit cells. Actinide content in this series reduces in the row: 2C (pyrochlore) > 7C > 5C > 8C > 3C (murataite). Due to congruent melting murataite-based ceramics may be produced by melting and the firstly segregated phase at melt crystallization is that with the highest fraction of the pyrochlore modules in its structure. The melts containing up to 10 wt. % AnO2 (An = Th, U, Np, Pu) or REE/An fraction of HLW form at crystallization zoned grains composed sequentially of the 5C → 8C → 3C phases with the highest actinide concentration in the core and the lowest — in the rim of the grains. Radiation resistance of the "murataite" is comparable to titanate pyrochlores. One more promising actinide hosts are ferrites with garnet structure. The matrices containing sometime complex fluorite structure oxide as an extra phase have leach and radiation resistance similar to the other well-known actinide waste forms.

Epidemiology of burns caused by moxibustion in Korea.

PubMed

Yoon, Cheonjae; Cho, Young Soon; Park, Seungchoon; Chung, Sung Phil; Choi, Young Hwan

2016-11-01

Moxibustion, a traditional Chinese treatment that uses dried Artemisia argyi, is a common cause of burns treated in Korean hospitals. We aimed to examine the characteristics of moxibustion-induced burns. This retrospective study examined the records of 59 patients who were treated for moxibustion-induced burns (April 2014-October 2015). All patients completed a questionnaire regarding their general characteristics and moxibustion use. The patients included 16 men and 43 women (average age: 49.1 years, 68 burn sites). Superficial second-degree burns were present at 21 sites, deep second- or third-degree burns at 44 sites, and unknown burns at 3 sites. The most common sites were the lower extremities, abdomen, and upper extremities. The most common practitioners were the patients (27/59, 45.7%) and Oriental medicine practitioners (23/59, 38.9%). The most common locations were the patient's home, Oriental medicine clinic, and moxibustion clinic. The most common reason for moxibustion was pain. Only the burn site was significantly associated with burn depth, and non-abdominal sites were 9.37-fold more likely to involve deep burns (vs. abdominal sites). Korean patients routinely undergo moxibustion, and care must be taken when using moxibustion at non-abdominal sites, due to the risk of deep burns. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

A low initial abundance of 247Cm in the early solar system and implications for r-process nucleosynthesis

NASA Astrophysics Data System (ADS)

Stirling, Claudine H.; Halliday, Alex N.; Potter, Emma-Kate; Andersen, Morten B.; Zanda, Brigitte

2006-11-01

The short-lived nuclide 247Cm is produced by r-process nucleosynthesis. When the presolar nebula formed, 247Cm became isolated from r-process production and its abundance diminished as a result of radioactive decay. Given its short half-life of only ˜ 16 million years, 247Cm is presently extinct, but its former presence should be detectable as small variations in 235U/ 238U in primitive meteoritic material, provided Cm was chemically fractionated from U at the time these solid objects formed. The magnitude of U isotopic anomalies in meteorites can thus be used to elucidate the timing and character of the last r-process nucleosynthetic event for input into models describing the formation and evolution of the early solar system. Here we report coupled U isotopic determinations and Nd/U proxy measurements for Cm/U in a series of acid-etched leachates and mineral assemblages extracted from meteorites containing primitive phases expected to show strong Cm-U fractionations. Using multiple-collector ICPMS, we are able to determine 235U/ 238U with 2 σ analytical uncertainties of ± 1 epsilon (1 epsilon = 1 part in 10,000) on sample sizes consisting of < 3 ng of 238U and < 20 pg of 235U. A double-spiking procedure using a mixed 236U- 233U spike was employed to allow instrumental mass fractionation to be reliably corrected internally and at high precision. Uranium isotopic results for almost 40 different phases show no resolvable deviations in 235U/ 238U from the chondritic value, at the ˜ 1-2 epsilon level. These data supplement our previous observations for a suite of bulk meteorite samples [C.H. Stirling, A.N. Halliday, D. Porcelli, In search of live 247Cm in the early solar system, Geochim. Cosmochim. Acta 69 (2005) 1059-1071] and provide evidence for a solar system initial 247Cm/ 235U of < 8 × 10 - 5 . Such a low value is difficult to explain without a long time-scale of ˜ 2.3 × 10 8 years between the last actinide producing r-process event and the formation of the solar system. As such it is difficult to reconcile with a model of actinide production in the same r-process forming event as 182Hf with a half-life of 8.9 My [G.J. Wasserburg, M. Busso, R. Gallino, Abundances of actinides and short-lived nonactinides in the interstellar medium: Diverse supernova sources for the r-processes, Astrophys. J. 466 (1996) L109-L113]. The alternative models of 182Hf production via a neutron-rich fast s-process, occurring, for example, in the helium burning shell in a 25 solar mass star during explosive nucleosynthesis [G.J. Wasserburg, M. Busso, R. Gallino, Abundances of actinides and short-lived nonactinides in the interstellar medium: Diverse supernova sources for the r-processes, Astrophys. J. 466 (1996) L109-L113], or via a distinct r-process event that is separate from actinide production [G.J. Wasserburg, M. Busso, R. Gallino, K.M. Nollet, Short-lived nuclei in the early solar system: Possible AGB sources, Nucl. Phys. A (in press)], may provide a viable explanation. However, further studies are also required to assess the veracity of Cm-U systematics, which are critically dependent on the suitability of using Nd and the light rare earth elements (LREEs) as a chemical proxy for Cm.

Viable placental allograft as a biological dressing in the clinical management of full-thickness thermal occupational burns

PubMed Central

Johnson, Eric L.; Tassis, Elisabet K.; Michael, Georgina M.; Whittinghill, Susan G.

2017-01-01

Abstract Rationale: Occupational burn injuries can be detrimental and difficult to manage. The majority of complex cases are referred and managed at regional burn centers where access to specialized care is available. As an alternative to hospitalization with staged surgical procedures, placental products may be used for outpatient medical management of these common burn injuries, especially if access to a regional burn center is limited or restricted. Fresh amnion has been a treatment of choice in burns for more than 100 years. As a biological covering with a broad scope of potential uses, human placental membranes represent a dressing that is particularly advantageous for burn therapy. Recent advances in tissue-preservation technology have allowed for the commercialization of placental amnion products. Patient concerns: To address several complications associated with burn injuries—contractures, scar formation, and pain—a viable cryopreserved placental membrane (vCPM) (Grafix—PRIME, Osiris Therapeutics, Inc., MD) retaining the anti-inflammatory, anti-fibrotic, and antimicrobial properties of fresh placental tissues was chosen for clinical use in the 2 cases reported, where both patients had restricted access to the regional burn center. Diagnoses: Two cases of work-related extremity burns presented to a local rural hospital for immediate post-injury assessment. The 1st case was of a man who sustained a 55.4 cm2 full-thickness 3rd degree thermal burn with exposed bone and tendon, to the left dorsal forefoot after having an industrial pressure washer caught on his work boot. The 2nd case was of a female who sustained a 4.7 cm2 full-thickness 3rd degree crush burn to the dorsum extensor surface of her dominant hand's index finger after applying 80-pounds per square inch of heated pressure from a hydraulic press. Interventions: Both burn patients elected to continue their care at the outpatient-based wound and hyperbaric center, receiving a combination of weekly ad libitum debridement, applications of vCPM, and occupational therapy. Outcomes: Both burns reached timely wound closure, and patients regained full range of motion of the affected limb, allowing for early return to work. The average number of allograft applications was 7.5, allowing both patients to return to work in an average of 63.5 days without adverse events or post-treatment complications. Lessons: The incorporation of this product in the treatment of these complex burns prevented amputation in one patient, and skin autografting and potential index finger contracture-formation in the second patient. The incorporation of vCPM in burn management may offer a new approach to outpatient burn management and may mitigate several of the complications seen post burn injury, leading to favorable patient outcomes. PMID:29245303

IMPROVED COMBUSTION AND EMISSIONS FOR MSW BURN-MANAGEMENT UNIT APPLICABLE TO REMOTE COMMUNITIES IN ALASKA - PHASE I

EPA Science Inventory

Approximately 180 to 225 very remote communities, the bulk inaccessible by road, with populations averaging 200 to 500 people, are located in Alaska for which the open burning of municipal solid waste is prevalent, inevitable, and necessary to minimize environmental health con...

Fuelwood use in U.S. counties

Treesearch

Kenneth E. Skog; Robert S. Manthy

1989-01-01

This study explains and determines fuelwood consumption at the county level based on county economic and demographic conditions, and identifies U.S. counties where potential fuelwood use problems and benefits are greatest. The percentage of wood-burning households in a county is estimated and multiplied by estimated average wood consumed per wood-burning household in...

10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

Code of Federal Regulations, 2014 CFR

2014-01-01

... under 10 CFR 50.90. (1) Maximum fuel rod average burn-up. (2) Fuel principal design requirements. (3... Cases. (3) Design Summary of Critical Sections. (4) American Concrete Institute (ACI) 318, ACI 349... control system, except burn-up limit. (8) Motor-operated and power-operated valves. (9) Instrumentation...

10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

Code of Federal Regulations, 2012 CFR

2012-01-01

... under 10 CFR 50.90. (1) Maximum fuel rod average burn-up. (2) Fuel principal design requirements. (3... Cases. (3) Design Summary of Critical Sections. (4) American Concrete Institute (ACI) 318, ACI 349... control system, except burn-up limit. (8) Motor-operated and power-operated valves. (9) Instrumentation...

10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

Code of Federal Regulations, 2013 CFR

2013-01-01

... under 10 CFR 50.90. (1) Maximum fuel rod average burn-up. (2) Fuel principal design requirements. (3... Cases. (3) Design Summary of Critical Sections. (4) American Concrete Institute (ACI) 318, ACI 349... control system, except burn-up limit. (8) Motor-operated and power-operated valves. (9) Instrumentation...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

Development of fire-resistant wood structural panels

NASA Technical Reports Server (NTRS)

Vaughan, T. W.; Etzold, R.

1977-01-01

Structural panels made with Xylok 210 resin as the binder had a burn-through resistance at least equal to the structural panels made with Kerimid 500. Therefore, because of its comparative ease of handling, Xylok 210 was selected as the resin binder to provide the baseline panel for the study of a means of improving the flame-spread resistance of the structural panels. The final resin-filler system consisted of Xylok 210 binder with the addition of ammonium oxalate and ammonium phosphate to the strands of the surface layers, using 24% of each salt based upon the air-dry weight of the strands. This system resulted in a panel with a flame-spread code of about 60, a Class 2 classification. A standard phenolic based structural panel had a flame-spread greater than 200 for laboratory prepared panels. The burn-through tests indicated an average burn-through time of 588 seconds for the specimens made with the final system. This compares to an average burn-through time of 287 seconds for the standard phenolic base structural specimen. One full-size panel was made with the final system.

Vegetation response to fire and postburn seeding treatments in juniper woodlands of the Grand Staircase-Escalante National Monument, Utah

USGS Publications Warehouse

Evangelista, P.; Stohlgren, T.J.; Guenther, D.; Stewart, S.

2004-01-01

We compared 3 naturally ignited burns with unburned sites in the Grand Staircase-Escalante National Monument. Each burn site was restored with native and nonnative seed mixes, restored with native seeds only, or regenerated naturally. In general, burned sites had significantly lower native species richness (1.8 vs. 2.9 species), native species cover (11% vs. 22.5%), and soil crust cover (4.1% vs. 15%) than unburned sites. Most burned plots, seeded or not, had significantly higher average nonnative species richness and cover and lower average native species richness and cover than unburned sites. Regression tree analyses suggest site variation was equally important to rehabilitation results as seeding treatments. Low native species richness and cover, high soil C, and low cover of biological soil crusts may facilitate increased nonnative species richness and cover. Our study also found that unburned sites in the region had equally high cover of nonnative species compared with the rest of the Monument. Cheatgrass (Bromus tectorum) dominated both burned and unburned sites. Despite the invasion of cheatgrass, unburned sites still maintain higher native species richness; however, the high cover of cheatgrass may increase fire frequency, further reduce native species richness and cover, and ultimately change vegetation composition in juniper woodlands.

Analysis of Alaskan burn severity patterns using remotely sensed data

USGS Publications Warehouse

Duffy, P.A.; Epting, J.; Graham, J.M.; Rupp, T.S.; McGuire, A.D.

2007-01-01

Wildland fire is the dominant large-scale disturbance mechanism in the Alaskan boreal forest, and it strongly influences forest structure and function. In this research, patterns of burn severity in the Alaskan boreal forest are characterised using 24 fires. First, the relationship between burn severity and area burned is quantified using a linear regression. Second, the spatial correlation of burn severity as a function of topography is modelled using a variogram analysis. Finally, the relationship between vegetation type and spatial patterns of burn severity is quantified using linear models where variograms account for spatial correlation. These results show that: 1) average burn severity increases with the natural logarithm of the area of the wildfire, 2) burn severity is more variable in topographically complex landscapes than in flat landscapes, and 3) there is a significant relationship between burn severity and vegetation type in flat landscapes but not in topographically complex landscapes. These results strengthen the argument that differential flammability of vegetation exists in some boreal landscapes of Alaska. Additionally, these results suggest that through feedbacks between vegetation and burn severity, the distribution of forest vegetation through time is likely more stable in flat terrain than it is in areas with more complex topography. ?? IAWF 2007.

Transmutation Scoping Studies for a Chloride Molten Salt Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidet, Florent; Feng, Bo; Kim, Taek

2016-01-01

Over the past few years, there has been strong renewed interest from private industry, mostly from start-up enterprises, in molten salt reactor (MSR) technologies because of the unique properties of this class of reactors. These are reactors in which the fuel is homogeneously mixed with the coolant in the form of liquid salts and is circulated continuously into and out of the active core region with on-line fuel management, salt treatment, and salt processing. In response to such wide-spread interest, Argonne National Laboratory is expanding its well-established reactor modelling and simulation expertise and infrastructure to enable detailed analysis and designmore » of MSRs. The tools being developed are able to simulate the continuous fuel flow, the complex on-line fuel management and elemental removal processes (e.g., fission product removal) using depletion steps representative of a real MSR system. Leveraging these capabilities, a parametric study on the transmutation performance of a simplified actinide-burning MSR concept that uses a chloride-based salt was performed. This type of salt has attracted attention over the more commonly discussed fluoride-based salts since no tritium is produced as a result of irradiation and it is compatible with a fast neutron spectrum. The studies discussed in this paper examine the performance of a burner MSR design with a fixed core size and power density over a range of possible fuel salt molar ratios with NaCl-MgCl2 as the carrier salt. The intent is to quantify the impact on the required transuranics content of the make-up fuel, the actinide transmutation rates, and other performance characteristics for typical burner MSR designs.« less

Chemical and physical properties of biomass burning aerosols and their CCN activity: A case study in Beijing, China.

PubMed

Wu, Zhijun; Zheng, Jing; Wang, Yu; Shang, Dongjie; Du, Zhoufei; Zhang, Yuanhang; Hu, Min

2017-02-01

Biomass burning emits large amounts of both trace gases and particles into the atmosphere. It plays a profound role in regional air quality and climate change. In the present study, an intensive campaign was carried out at an urban site in Beijing, China, in June 2014, which covered the winter wheat harvest season over the North China Plain (NCP). Meanwhile, two evident biomass-burning events were observed. A clear burst in ultrafine particles (below 100nm in diameter, PM 1 ) and subsequent particle growth took place during the events. With the growth of the ultrafine particles, the organic fraction of PM 1 increased significantly. The ratio of oxygen to carbon (O:C), which had an average value of 0.23±0.04, did not show an obvious enhancement, indicating that a significant chemical aging process of the biomass-burning aerosols was not observed during the course of events. This finding might have been due to the fact that the biomass-burning events occurred in the late afternoon and grew during the nighttime, which is associated with a low atmospheric oxidation capacity. On average, organics and black carbon (BC) were dominant in the biomass-burning aerosols, accounting for 60±10% and 18±3% of PM 1 . The high organic and BC fractions led to a significant suppression of particle hygroscopicity. Comparisons among hygroscopicity tandem differential mobility analyzer (HTDMA)-derived, cloud condensation nuclei counter (CCNc)-derived, and aerosol mass spectrometer-based hygroscopicity parameter (κ) values were consistent. The mean κ values of biomass-burning aerosols derived from both HTDMA and CCNc measurements were approximately 0.1, regardless of the particle size, indicating that the biomass-burning aerosols were less active. The burst in particle count during the biomass-burning events resulted in an increased number of cloud condensation nuclei (CCN) at supersaturation (SS)=0.2-0.8%. Copyright © 2016 Elsevier B.V. All rights reserved.

Basic investigation into the present burn care system in China: burn units, doctors, nurses, beds and special treatment equipment.

PubMed

Zhanzeng, Feng; Yurong, Zheng; Chuangang, You; Yunyun, Jin; Xingang, Wang; Zhaofan, Xia; Chunmao, Han

2015-03-01

The aim of the study was to survey the current burn units in China to understand the burn care system in the country and supply basic data for the National Burn Repository of China (NBRC) and further research. A questionnaire was developed and sent to burn unit directors in China via e-mail, which was followed up with reminder text messages to obtain information for the study. Of the 405 hospitals from the 31 provinces in mainland China that responded to the questionnaire, 63.7% of the responses came from Grade 3A hospitals, and the most popular model of organisation was the Burns and Plastic Surgery arrangement (63.0%). An average of 9.43±0.351 doctors work in each burn unit with 70.4% of all units having 4-11 doctors. The ratio of chief surgeon to associate chief surgeon to attending surgeon to resident surgeon and surgeon assistant was 1:1.8:2.2:2.3. An average of 30% of all doctors in each burn unit held postgraduate degrees, and more than 90% of all surgeons held a bachelor's degree or higher. There were 16.48±0.637 nurses per burn unit, 56.5% of burn units had 8-15 nurses, and the ratio of chief nurse to associate chief nurse to supervisor nurse to nurse practitioner to junior nurse was 1:11.8:57.0:82.1:86.1. More than 80% of all nurses had received a college education or above. However, only 30% of nurses held bachelor's degrees or higher, while only 0.66% of nurses had received postgraduate degrees. A total of 39.91±1.50 beds were available in each burn unit and 45% of burn units had 20-39 beds. Up to 70% of the total beds were prepared for patients with burn, and more than 10% of the beds were specifically for patients with severe burn. The ratios of doctors to nurses, beds to doctors, beds to nurses, and beds to doctors and nurses were 0.64±0.01, 4.48±0.12, 2.67±0.09, and 1.66±0.06, respectively. The workload of each doctor and nurse was most heavy in units with 40-59 beds. In addition, we estimated that there were 0.05, 0.5, 0.8, and 1.9 burn units, burn doctors, nurses, and beds, respectively, per 100,000 members of the population in mainland China. Chinese burn units lack special burn treatments, nursing equipment, and operation apparatuses. To the best of our knowledge, this is the first survey of the present burn care system in China. These results confirm that the burn care system is not equivalent to the national power of this country and the system lacks a great number of trained burn professionals. Burn doctors and nurses bear a heavy burden of work. This report supplies basic data to spur further research. We propose creating a burn unit registration system and a special database in China. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

"What do kids know": a survey of 420 Grade 5 students in Cambodia on their knowledge of burn prevention and first-aid treatment.

PubMed

Hsiao, Marvin; Tsai, Brian; Uk, Pisey; Jo, Harrison; Gomez, Manuel; Gollogly, James G; Beveridge, Massey

2007-05-01

Cambodia is a developing country of 13 million people where there are an estimated 20,000 burns and 2000 burn deaths annually. Two thirds of the burns occur to children under the age of 10 years. The purpose of this study was to determine the knowledge of burn prevention and first aid for burns in Grade 5 Cambodian school children, as baseline information to design a burn prevention campaign. A 34-question survey regarding burn prevention and first-aid treatment for burn injuries was developed. Additional questions on TV watching habits were included to determine the feasibility of a targeted TV burn educational campaign. The survey was translated into Khmer language and tested on a trial class for accuracy and ease of administration. After obtaining the school director's permission and children's consent the survey was administered by Canadian medical students helped by trained translators and teachers to Grade 5 students from eight different elementary schools in the Kampot province. A total of 420 students were surveyed. Average age was 12.5 years (range 9-17 years) and 55% were females. Seventy-four percent routinely cared for other children. Only 52% had TV at home but still 78% managed to watch TV for an average 2h per day. Even though 36% of students indicated they had received information about burn prevention and first aid, only 13% mentioned application of cool water as initial treatment, only 7% knew to roll on the ground if their clothes caught fire, and nearly 50% would pour water on a burning pot of oil. Half of students indicated that they would not believe a TV message promoting application of cold water on acute burns. Top reasons given were parental influence, belief in other treatments, and not trusting TV messages. Interestingly, 62% of these skeptics would change their mind if the TV message was endorsed by an authority figure such as a physician, teacher, parent, or the Ministry of Health. A set of five Public Service Announcements for Cambodian TV were developed and produced based on the results of this survey. This survey identified significant inadequacies in Cambodian children's knowledge about burn prevention and first aid and suggested that a televised burn prevention campaign could be an effective method to improve their knowledge, especially if it was endorsed by an authority figure.

Colloid-borne forms of tetravalent actinides: A brief review

NASA Astrophysics Data System (ADS)

Zänker, Harald; Hennig, Christoph

2014-02-01

Tetravalent actinides, An(IV), are usually assumed to be little mobile in near-neutral environmental waters because of their low solubility. However, there are certain geochemical scenarios during which mobilization of An(IV) in a colloid-borne (waterborne) form cannot be ruled out. A compilation of colloid-borne forms of tetravalent actinides described so far for laboratory experiments together with several examples of An(IV) colloids observed in field experiments and real-world scenarios are given. They are intended to be a knowledge base and a tool for those who have to interpret actinide behavior under environmental conditions. Synthetic colloids containing structural An(IV) and synthetic colloids carrying adsorbed An(IV) are considered. Their behavior is compared with the behavior of An(IV) colloids observed after the intentional or unintentional release of actinides into the environment. A list of knowledge gaps as to the behavior of An(IV) colloids is provided and items which need further research are highlighted.

2017 Report for New LANL Physical Vapor Deposition Capability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roman, Audrey Rae; Zhao, Xinxin; Bond, Evelyn M.

There is an urgent need at LANL to achieve uniform, thin film actinide targets that are essential for nuclear physics experiments. The target preparation work is currently performed externally by Professor Walter Loveland at Oregon State University, who has made various evaporated actinide targets such as Th and U for use on several nuclear physics measurements at LANSCE. We are developing a vapor deposition capability, with the goal of evaporating Th and U in the Actinide Research Facility (ARF) at TA-48. In the future we plan to expand this work to evaporating transuranic elements, such as Pu. The ARF ismore » the optimal location for evaporating actinides because this lab is specifically dedicated to actinide research. There are numerous instruments in the ARF that can be used to provide detailed characterization of the evaporated thin films such as: Table top Scanning Electron Microscope, In-situ X-Ray Diffraction, and 3D Raman spectroscopy. These techniques have the ability to determine the uniformity, surface characterization, and composition of the deposits.« less

Formation of unprecedented actinidecarbon triple bonds in uranium methylidyne molecules

PubMed Central

Lyon, Jonathan T.; Hu, Han-Shi; Andrews, Lester; Li, Jun

2007-01-01

Chemistry of the actinide elements represents a challenging yet vital scientific frontier. Development of actinide chemistry requires fundamental understanding of the relative roles of actinide valence-region orbitals and the nature of their chemical bonding. We report here an experimental and theoretical investigation of the uranium methylidyne molecules X3UCH (X = F, Cl, Br), F2ClUCH, and F3UCF formed through reactions of laser-ablated uranium atoms and trihalomethanes or carbon tetrafluoride in excess argon. By using matrix infrared spectroscopy and relativistic quantum chemistry calculations, we have shown that these actinide complexes possess relatively strong UC triple bonds between the U 6d-5f hybrid orbitals and carbon 2s-2p orbitals. Electron-withdrawing ligands are critical in stabilizing the U(VI) oxidation state and sustaining the formation of uranium multiple bonds. These unique UC-bearing molecules are examples of the long-sought actinide-alkylidynes. This discovery opens the door to the rational synthesis of triple-bonded actinidecarbon compounds. PMID:18024591

A Screened Hybrid DFT Study of Actinide Oxides, Nitrides, and Carbides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wen, Xiaodong; Martin, Richard L.; Scuseria, Gustavo E.

2013-06-27

A systematic study of the structural, electronic, and magnetic properties of actinide oxides, nitrides, and carbides (AnX1–2 with X = C, N, O) is performed using the Heyd–Scuseria–Ernzerhof (HSE) hybrid functional. Our computed results show that the screened hybrid HSE functional gives a good description of the electronic and structural properties of actinide dioxides (strongly correlated insulators) when compared with available experimental data. However, there are still some problems reproducing the electronic properties of actinide nitrides and carbides (strongly correlated metals). In addition, in order to compare with the results by HSE, the structures, electronic, and magnetic properties of thesemore » actinide compounds are also investigated in the PBE and PBE+U approximation. Interestingly, the density of states of UN obtained with PBE compares well with the experimental photoemission spectra, in contrast to the hybrid approximation. This is presumably related to the need of additional screening in the Hartree–Fock exchange term of the metallic phases.« less

Ceramicrete stabilization of U-and Pu-bearing materials

DOEpatents

Wagh, Arun S.; Maloney, M. David; Thompson, Gary H.

2007-11-13

A method of stabilizing nuclear material is disclosed. Oxides or halides of actinides and/or transuranics (TRUs) and/or hydrocarbons and/or acids contaminated with actinides and/or TRUs are treated by adjusting the pH of the nuclear material to not less than about 5 and adding sufficient MgO to convert fluorides present to MgF.sub.2; alumina is added in an amount sufficient to absorb substantially all hydrocarbon liquid present, after which a binder including MgO and KH.sub.2PO.sub.4 is added to the treated nuclear material to form a slurry. Additional MgO may be added. A crystalline radioactive material is also disclosed having a binder of the reaction product of calcined MgO and KH.sub.2PO.sub.4 and a radioactive material of the oxides and/or halides of actinides and/or transuranics (TRUs). Acids contaminated with actinides and/or TRUs, and/or actinides and/or TRUs with or without oils and/or greases may be encapsulated and stabilized by the binder.

Matrix infrared spectra and electronic structure calculations of the first actinide borylene: FB=ThF(2).

PubMed

Wang, Xuefeng; Roos, Björn O; Andrews, Lester

2010-03-14

Laser-ablated Th atoms react with BF(3) during condensation in excess argon at 6 K to form the first actinide borylene (FB=ThF(2)) and actinide-boron multiple bond. Three new product absorptions in the B-F and Th-F stretching regions of matrix infrared spectra are assigned to FB=ThF(2) from comparison to theoretically predicted vibrational frequencies.

CHARACTERIZATION OF ACTINIDES IN SIMULATED ALKALINE TANK WASTE SLUDGES AND LEACHATES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, Kenneth L.

In this project, both the fundamental chemistry of actinides in alkaline solutions (relevant to those present in Hanford-style waste storage tanks), and their dissolution from sludge simulants (and interactions with supernatants) have been investigated under representative sludge leaching procedures. The leaching protocols were designed to go beyond conventional alkaline sludge leaching limits, including the application of acidic leachants, oxidants and complexing agents. The simulant leaching studies confirm in most cases the basic premise that actinides will remain in the sludge during leaching with 2-3 M NaOH caustic leach solutions. However, they also confirm significant chances for increased mobility of actinidesmore » under oxidative leaching conditions. Thermodynamic data generated improves the general level of experiemental information available to predict actinide speciation in leach solutions. Additional information indicates that improved Al removal can be achieved with even dilute acid leaching and that acidic Al(NO3)3 solutions can be decontaminated of co-mobilized actinides using conventional separations methods. Both complexing agents and acidic leaching solutions have significant potential to improve the effectiveness of conventional alkaline leaching protocols. The prime objective of this program was to provide adequate insight into actinide behavior under these conditions to enable prudent decision making as tank waste treatment protocols develop.« less

Survey of glass plutonium contents and poison selection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plodinec, M.J.; Ramsey, W.G.; Ellison, A.J.G.

1996-05-01

If plutonium and other actinides are to be immobilized in glass, then achieving high concentrations in the glass is desirable. This will lead to reduced costs and more rapid immobilization. However, glasses with high actinide concentrations also bring with them undersirable characteristics, especially a greater concern about nuclear criticality, particularly in a geologic repository. The key to achieving a high concentration of actinide elements in a glass is to formulate the glass so that the solubility of actinides is high. At the same time, the glass must be formulated so that the glass also contains neutron poisons, which will preventmore » criticality during processing and in a geologic repository. In this paper, the solubility of actinides, particularly plutonium, in three types of glasses are discussed. Plutonium solubilities are in the 2-4 wt% range for borosilicate high-level waste (HLW) glasses of the type which will be produced in the US. This type of glass is generally melted at relatively low temperatures, ca. 1150{degrees}C. For this melting temperature, the glass can be reformulated to achieve plutonium solubilities of at least 7 wt%. This low melting temperature is desirable if one must retain volatile cesium-137 in the glass. If one is not concerned about cesium volatility, then glasses can be formulated which can contain much larger amounts of plutonium and other actinides. Plutonium concentrations of at least 15 wt% have been achieved. Thus, there is confidence that high ({ge}5 wt%) concentrations of actinides can be achieved under a variety of conditions.« less

A Model to Improve Detection of Nonaccidental Pediatric Burns.

PubMed

Nigro, Lauren C; Feldman, Michael J; Foster, Robin L; Pozez, Andrea L

2018-06-01

Pediatric burn patients warrant thorough evaluation because a sizeable proportion of pediatric burns are nonaccidental. A multidisciplinary method involving an internal child protection team (CPT) was developed and used to identify suspected nonaccidental pediatric burns in all pediatric burn patients 5 years of age or younger who were evaluated by the CPT and social workers at our institution over a 55-month period. We identified 343 cases for review that fit our age criteria, 6 of which we identified as cases of suspected abuse or neglect. On average, these patients were younger, suffered greater total body surface area burns (TBSA), and required a longer length of stay in the hospital than the total population. We have not had readmissions for repeat nonaccidental pediatric burn injuries in this group of patients since this model was implemented. Our multidisciplinary method might provide a more consistent and reliable method for identifying cases of suspected abuse. © 2018 American Medical Association. All Rights Reserved.

A comparison of burn season effects on nesting birds in North Dakota mixed-grass prairie

USGS Publications Warehouse

Higgins, K.F.

1986-01-01

During 1982-1985, the effects of single spring and fall burn treatments on ground nesting birds and residual cover were studied on five paired areas of native mixed-grass prairie in northwestern Stutsman County, ND. Annually, visual obstruction readings to index the height-density of residual cover were taken once and nest searches were made four times on each area. Residual nesting cover on fall burn plots averaged taller and denser than on spring burn plots during post-fire growing years 2-4. A total of 259 duck nests and 63 nests of non-passerine birds were found during the four years. Duck nesting success was significantly greater (P < 0.05) in fall burn plots than in spring burn plots for all species and years combined. Too few nests of other bird species were found for valid comparisons. Results suggest that vegetation structure and duck nesting response to spring and fall burns became similar again by the third post-fire growing season.

Recreational-outdoor burns: the impact and severity--a retrospective review of 107 patients.

PubMed

Phillips, B J; Kassir, A; Anderson, B; Schiller, W R

1998-09-01

Campfires, bonfires and barbecues play a prominent role in outdoor activities and serve a variety of decorative and functional purposes. Given all of it's various forms, uses and benefits, the outdoor fire can turn dangerous in a matter of seconds: a stumble or fall (the child running that trips) leads to direct contact with the flames and subsequent burn injury. With it's everyday occurrence, we were surprised to find a paucity of information regarding this type of burn in the literature, including the NBIE analysis. A retrospective review of 107 patients admitted to the Maricopa Medical Bum Center, from 1987 to 1996, was conducted. Each chart was analyzed for the patient demographics, mechanism of injury, percent total body surface area burned, operative versus non-operative treatment and overall outcome. An average burn injury involved 5.7% TBSA, with a wide range from 1 to 47%. The majority of our population involved either small children or intoxicated adults and a total of 50 patients required 92 operations. Severe morbidity, including 4 amputations and 2 mortalities, were seen. The average hospital stay was 14.3 days, ranging from 1 to 52 days. Recreational outdoor burns were extremely common injuries leading to loss of functional employment and prolonged physical therapy requirements. Small children and intoxicated adults comprised the majority of our study population. The impact and severity of such outdoor fires could be greatly affected by appropriate attention to prevention.

Burns in Israel, comparative study: Demographic, etiologic and clinical trends 1997-2003 vs. 2004-2010.

PubMed

Harats, M; Peleg, K; Givon, A; Kornhaber, R; Goder, M; Jaeger, M; Haik, J

2016-05-01

To review hospitalised burn patients from 2004 to 2010 admitted to Israeli burn units and compare these result with data from 1997 to 2003. Retrospectively, data was collected from the Israeli Trauma Registry (ITR) encompassing all burn admissions to Israeli burn units from 2004-2010 and compared to 1997-2003. Of the 5269 burn patients admitted from 2004 to 2010, 39.8% were non-Jewish. Infants under two years were the prominent age group (24.1%). Second to third degree burns 1-9% TBSA/first degree burns were 71%, second to third degree burns 10-19% TBSA were 16% and those 20%>TBSA consisted of 13%. Only 2.7% involved an inhalation injury. The average length of stay was 11.67 days and mortality rate 3.72%. All data was compared to the previous year's 1997-2003 and trends were identified. Within Israel, high risk populations remain infants under two years of age, males and those from non-Jewish populations. National prevention strategies and campaigns are warranted to inform and educated parents of young children and those at risk of burns. Of note, advances in burn care and procedures might have contributed to a decrease in the length of hospital stay (LOS). Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Atmospheric Effects of Biomass Burning in Madagascar

NASA Technical Reports Server (NTRS)

Aikin, Arthur C.; Hoegy, Walter R.; Ziemke, Jerry R.; Thorpe, Arthur; Einaudi, Franco (Technical Monitor)

2000-01-01

Simultaneous tropospheric ozone and aerosols observed using the TOMS satellite instrument are reported for Madagascar during the 1979 through 1999 time period Ozone observations made using the TOMS tropospheric ozone convective-cloud differential method show that the tropospheric ozone amount associated with Madagascar has an average monthly value of 30 DU (Dobson units). The average value is enhanced by 10 to 15 DU in October This maximum coincides with the time of maximum biomass area burning in Madagascar and parts of southern Africa. The aerosol index derived from TOMS is examined for correlation with biomass burning in Madagascar and southern Africa. There is good correlation between a satellite observation derived fire index for different parts of Madagascar, tropospheric ozone and the TOMS aerosol index in the same geographical area. Aerosols from fires were found to reach their peak in November and to persist over Madagascar until sometime in December.

Crystal Growth and Characterization of THO2 and UxTh1-xO2

DTIC Science & Technology

2013-03-01

bulk actinide crystals would open up new possibilities for the detection of weapons of mass destruction, the study of the effect of aging on...way of growing bulk actinide materials of optical quality. These refractory oxide single crystals offer potential applications in thorium nuclear...fuel technology, wide-band-gap uranium-based direct-conversion solid state neutron detectors, and understanding how actinide fuels age with time. ThO2

10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

Code of Federal Regulations, 2011 CFR

2011-01-01

... amendment under 10 CFR 50.90. (1) Maximum fuel rod average burn-up. (2) Fuel principal design requirements... Case-284. (3) Design Summary of Critical Sections. (4) American Concrete Institute (ACI) 318, ACI 349... control system, except burn-up limit. (8) Motor-operated and power-operated valves. (9) Instrumentation...

10 CFR Appendix D to Part 52 - Design Certification Rule for the AP1000 Design

Code of Federal Regulations, 2010 CFR

2010-01-01

... amendment under 10 CFR 50.90. (1) Maximum fuel rod average burn-up. (2) Fuel principal design requirements... Case-284. (3) Design Summary of Critical Sections. (4) American Concrete Institute (ACI) 318, ACI 349... control system, except burn-up limit. (8) Motor-operated and power-operated valves. (9) Instrumentation...

EMISSIONS FROM OUTDOOR WOOD-BURNING RESIDENTIAL HOT WATER FURNACES

EPA Science Inventory

The report gives results of measurements of emissions from a single-pass and a double-pass furnace at average heat outputs of 15,000 and 30,000 Btu/hr (4.4 and 8.8 kW) while burning typical oak cordwood fuel. One furnace was also tested once at each heat output while fitted with ...

High-temperature Gas Reactor (HTGR)

NASA Astrophysics Data System (ADS)

Abedi, Sajad

2011-05-01

General Atomics (GA) has over 35 years experience in prismatic block High-temperature Gas Reactor (HTGR) technology design. During this period, the design has recently involved into a modular have been performed to demonstrate its versatility. This versatility is directly related to refractory TRISO coated - particle fuel that can contain any type of fuel. This paper summarized GA's fuel cycle studies individually and compares each based upon its cycle sustainability, proliferation-resistance capabilities, and other performance data against pressurized water reactor (PWR) fuel cycle data. Fuel cycle studies LEU-NV;commercial HEU-Th;commercial LEU-Th;weapons-grade plutonium consumption; and burning of LWR waste including plutonium and minor actinides in the MHR. results show that all commercial MHR options, with the exception of HEU-TH, are more sustainable than a PWR fuel cycle. With LEU-NV being the most sustainable commercial options. In addition, all commercial MHR options out perform the PWR with regards to its proliferation-resistance, with thorium fuel cycle having the best proliferation-resistance characteristics.

Seasonal and interannual variations in CO and BC emissions from open biomass burning in Southern Africa during 1998-2005

NASA Astrophysics Data System (ADS)

Ito, Akinori; Ito, Akihiko; Akimoto, Hajime

2007-06-01

We estimate the emissions of carbon monoxide (CO) and black carbon (BC) from open vegetation fires in the Southern Hemisphere Africa from 1998 to 2005 using satellite information in conjunction with a biogeochemical model. Monthly burned areas at a 0.5-degree resolution are estimated from the Visible InfraRed Scanner (VIRS) fire count product and the MODerate resolution Imaging Spectroradiometer (MODIS) burned area data set associated with the MODIS tree cover imagery in grasslands and woodlands. The monthly fuel load distributions are derived from a 0.5-degree terrestrial carbon cycle model in conjunction with satellite data. The monthly maps of combustion factors and emission factors are estimated using empirical models that predict the effects of fuel conditions on these factors in grasslands and woodlands. Our annually averaged effective CO and BC emissions per area burned are 27 g CO m-2 and 0.17 g BC m-2 which are consistent with the products of fuel consumption and emission factors typically measured in southern Africa. The CO and BC emissions from open vegetation burning in southern Africa range from 45 Tg CO yr-1 and 0.26 Tg BC yr-1 for 2002 to 75 Tg CO yr-1 and 0.42 Tg BC yr-1 for 1998. The monthly averaged burned areas from VIRS fire counts peak earlier than modeled CO emissions. This characteristic delay between burned areas and emissions is mainly explained by significant changes in combustion factors for woodlands in our model. Consequently, the peaks in CO and BC emissions from our bottom-up approach are identical to those from previous top-down estimates using the Measurement Of the Pollution In The Troposphere (MOPITT) and the Total Ozone Mapping Spectrometer (TOMS) Aerosol Index (AI) data.

Mercury emissions from biomass burning in China.

PubMed

Huang, Xin; Li, Mengmeng; Friedli, Hans R; Song, Yu; Chang, Di; Zhu, Lei

2011-11-01

Biomass burning covers open fires (forest and grassland fires, crop residue burning in fields, etc.) and biofuel combustion (crop residues and wood, etc., used as fuel). As a large agricultural country, China may produce large quantities of mercury emissions from biomass burning. A new mercury emission inventory in China is needed because previous studies reflected outdated biomass burning with coarse resolution. Moreover, these studies often adopted the emission factors (mass of emitted species per mass of biomass burned) measured in North America. In this study, the mercury emissions from biomass burning in China (excluding small islands in the South China Sea) were estimated, using recently measured mercury concentrations in various biomes in China as emission factors. Emissions from crop residues and fuelwood were estimated based on annual reports distributed by provincial government. Emissions from forest and grassland fires were calculated by combining moderate resolution imaging spectroradiometer (MODIS) burned area product with combustion efficiency (ratio of fuel consumption to total available fuels) considering fuel moisture. The average annual emission from biomass burning was 27 (range from 15.1 to 39.9) Mg/year. This inventory has high spatial resolution (1 km) and covers a long period (2000-2007), making it useful for air quality modeling.

Burns in patients over 90: a fifteen-year series from a regional burns centre.

PubMed

Shariff, Zakir; Rodrigues, Jeremy N; Anwar, Umair; Austin, Orla; Phipps, Alan

2015-03-01

The elderly constitute an expanding subgroup within society, and may have differences in health needs compared to younger patients. The specific needs and outcomes of elderly patients with burns have been widely studied. However, the definition of elderly often used in previous studies is a cut off of 65 years old. Within this broadly defined group, the very elderly may have distinct health care needs and issues. This study investigated aetiology, management and outcome of burns in those over 90 years treated at a single UK burns service over a period of 15 years between 1998 and 2013, and compares these data to published data describing 'younger' elderly burns patients. Twenty two patients were included, with a 2:1 female:male ration, and a mean 9%TBSA burn. Six of the 22 died during their admission, and those who survived averaged 8 days inpatient stay per %TBSA. The very elderly with burns may fare worse than younger elderly patients. Although burns in the very elderly are relatively infrequent events, they require significant resource. Further work to optimise their outcome is required. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Air Pollution Episodes Associated with Prescribed Burns

NASA Astrophysics Data System (ADS)

Hart, M.; Di Virgilio, G.; Jiang, N.

2017-12-01

Air pollution events associated with wildfires have been associated with extreme health impacts. Prescribed burns are an important tool to reduce the severity of wildfires. However, if undertaken during unfavourable meteorological conditions, they too have the capacity to trigger extreme air pollution events. The Australian state of New South Wales has increased the annual average area treated by prescribed burn activities by 45%, in order to limit wildfire activity. Prescribed burns need to be undertaken during meteorological conditions that allow the fuel load to burn, while still allowing the burn to remain under control. These conditions are similar to those that inhibit atmospheric dispersion, resulting in a fine balance between managing fire risk and managing ambient air pollution. During prescribed burns, the Sydney air shed can experience elevated particulate matter concentrations, especially fine particulates (PM2.5) that occasionally exceed national air quality standards. Using pollutant and meteorological data from sixteen monitoring stations in Sydney we used generalized additive model and CART analyses to profile the meteorological conditions influencing air quality during planned burns. The insights gained from this study will help improve prescribed burn scheduling in order to reduce the pollution risk to the community, while allowing fire agencies to conduct this important work.

Estimating the usage of allograft in the treatment of major burns.

PubMed

Horner, C W M; Atkins, J; Simpson, L; Philp, B; Shelley, O; Dziewulski, P

2011-06-01

To assess the amount of allograft used in the past treatment of major burns and calculate a figure to guide estimation of the quantity of allograft required to treat future patients and aid resource planning. A retrospective observational study. Records of 143 patients treated with major burns at a regional centre, from January 2004 to November 2008 were accessed with biometric data and quantity of allograft used being recorded. This data was used to calculate an allograft index (cm² allograft used/burn surface area (cm²)) (AI) for each patient. 112 of the 143 patients had complete sets of data, of the 112, 89 patients survived the initial stay in hospital. For all data average AI=1.077 ± 0.090. AI varied according to burn % area with burns < 40% requiring 0.490 cm² allo/cm²burn, increasing in a logarithmic fashion (R²=0.995) for burn areas > 40%. The ability to estimate deceased donor skin requirements based on % body surface area affected is important in the care planning for patients with major burns. Our findings of 0.5 cm² allograft/cm² burn for injuries less than 40% TBSA, increasing to 1.82 cm² allograft/cm² burn for injuries up to 80% TBSA can be used for planning purposes for individual services and for burn disaster planning. Copyright © 2010 Elsevier Ltd and ISBI. All rights reserved.

Evaluation of Ultra High Pressure (UHP) Firefighting in a Room-and-Contents Fire

DTIC Science & Technology

2017-03-15

Burn Room and Hangar Temperature Prior to Ignition ............................................... 18 Figure 12. Effect of Temperature on Normalized...Figure 20. Maximum Average Temperature and Heat Flux ......................................................... 22 Figure 21. Effect of Maximum Average...Aspirated Ceiling Temperature .................................... 23 Figure 22. Effect of Maximum Average Floor Heat Flux on Extinguishment Quantity

Nuclear waste disposal—pyrochlore (A2B2O7): Nuclear waste form for the immobilization of plutonium and "minor" actinides

NASA Astrophysics Data System (ADS)

Ewing, Rodney C.; Weber, William J.; Lian, Jie

2004-06-01

During the past half-century, the nuclear fuel cycle has generated approximately 1400 metric tons of plutonium and substantial quantities of the "minor" actinides, such as Np, Am, and Cm. The successful disposition of these actinides has an important impact on the strategy for developing advanced nuclear fuel cycles, weapons proliferation, and the geologic disposal of high-level radioactive waste. During the last decade, there has been substantial interest in the use of the isometric pyrochlore structure-type, A2B2O7, for the immobilization of actinides. Most of the interest has focused on titanate-pyrochlore because of its chemical durability; however, these compositions experience a radiation-induced transition from the crystalline-to-aperiodic state due to radiation damage from the alpha-decay of actinides. Depending on the actinide concentration, the titanate pyrochlore will become amorphous in less than 1000 years of storage. Recently, systematic ion beam irradiations of a variety of pyrochlore compositions has revealed that many zirconate pyrochlores do not become amorphous, but remain crystalline as a defect fluorite structure-type due to disordering of the A- and B-site cations. The zirconate pyrochlores will remain crystalline even to very high doses, greater than 100 displacements per atom. Systematic experimental studies of actinide-doped and ion beam-irradiated pyrochlore, analyses of natural U- and Th-bearing pyrochlore, and simulations of the energetics of the disordering process now provide a rather detailed understanding of the structural and chemical controls on the response of pyrochlore to radiation. These results provide a solid basis for predicting the behavior and durability of pyrochlore used to immobilize plutonium.

The nature of chemical bonding in actinide and lanthanide ferrocyanides determined by X-ray absorption spectroscopy and density functional theory.

PubMed

Dumas, Thomas; Guillaumont, Dominique; Fillaux, Clara; Scheinost, Andreas; Moisy, Philippe; Petit, Sébastien; Shuh, David K; Tyliszczak, Tolek; Den Auwer, Christophe

2016-01-28

The electronic properties of actinide cations are of fundamental interest to describe intramolecular interactions and chemical bonding in the context of nuclear waste reprocessing or direct storage. The 5f and 6d orbitals are the first partially or totally vacant states in these elements, and the nature of the actinide ligand bonds is related to their ability to overlap with ligand orbitals. Because of its chemical and orbital selectivities, X-ray absorption spectroscopy (XAS) is an effective probe of actinide species frontier orbitals and for understanding actinide cation reactivity toward chelating ligands. The soft X-ray probes of the light elements provide better resolution than actinide L3-edges to obtain electronic information from the ligand. Thus coupling simulations to experimental soft X-ray spectral measurements and complementary quantum chemical calculations yields quantitative information on chemical bonding. In this study, soft X-ray XAS at the K-edges of C and N, and the L2,3-edges of Fe was used to investigate the electronic structures of the well-known ferrocyanide complexes K4Fe(II)(CN)6, thorium hexacyanoferrate Th(IV)Fe(II)(CN)6, and neodymium hexacyanoferrate KNd(III)Fe(II)(CN)6. The soft X-ray spectra were simulated based on quantum chemical calculations. Our results highlight the orbital overlapping effects and atomic effective charges in the Fe(II)(CN)6 building block. In addition to providing a detailed description of the electronic structure of the ferrocyanide complex (K4Fe(II)(CN)6), the results strongly contribute to confirming the actinide 5f and 6d orbital oddity in comparison to lanthanide 4f and 5d.

The nature of chemical bonding in actinide and lanthanide ferrocyanides determined by X-ray absorption spectroscopy and density functional theory

DOE PAGES

Dumas, Thomas; Guillaumont, Dominique; Fillaux, Clara; ...

2016-01-01

The electronic properties of actinide cations are of fundamental interest to describe intramolecular interactions and chemical bonding in the context of nuclear waste reprocessing or direct storage. The 5f and 6d orbitals are the first partially or totally vacant states in these elements, and the nature of the actinide ligand bonds is related to their ability to overlap with ligand orbitals. Because of its chemical and orbital selectivities, X-ray absorption spectroscopy (XAS) is an effective probe of actinide species frontier orbitals and for understanding actinide cation reactivity toward chelating ligands. The soft X-ray probes of the light elements provide bettermore » resolution than actinide L 3 -edges to obtain electronic information from the ligand. Thus coupling simulations to experimental soft X-ray spectral measurements and complementary quantum chemical calculations yields quantitative information on chemical bonding. In this study, soft X-ray XAS at the K-edges of C and N, and the L 2,3 -edges of Fe was used to investigate the electronic structures of the well-known ferrocyanide complexes K 4 Fe II (CN) 6 , thorium hexacyanoferrate Th IV Fe II (CN) 6 , and neodymium hexacyanoferrate KNd III Fe II (CN) 6 . The soft X-ray spectra were simulated based on quantum chemical calculations. Our results highlight the orbital overlapping effects and atomic effective charges in the Fe II (CN) 6 building block. In addition to providing a detailed description of the electronic structure of the ferrocyanide complex (K 4 Fe II (CN) 6 ), the results strongly contribute to confirming the actinide 5f and 6d orbital oddity in comparison to lanthanide 4f and 5d.« less

MA transmutation performance in the optimized MYRRHA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malambu, E.; Van den Eynde, G.; Fernandez, R.

MYRRHA (multi-purpose hybrid research reactor for high-tech applications) is a multipurpose research facility currently being developed at SCK-CEN. It will be able to work in both critical and subcritical modes and, cooled by lead-bismuth eutectic. In this paper the minor actinides (MA) transmutation capabilities of MYRRHA are investigated. (Pu + Am, U) MOX fuel and (Np + Am + Cm, Pu) Inert Matrix Fuel test samples have been loaded in the central channel of the MYRRHA critical core and have been irradiated during five cycles, each one consisting of 90 days of operation at 100 MWth and 30 days ofmore » shutdown. The reactivity worth of the test fuel assembly was about 1.1 dollar. A wide range of burn-up level has been achieved, extending from 42 to 110 MWd/kg HM, the samples with lower MA-to-Pu ratios reaching the highest burn-up. This study has highlighted the importance of the initial MA content, expressed in terms of MA/Pu ratio, on the transmutation rate of MA elements. For (Pu + Am, U) MOX fuel samples, a net build-up of MA is observed when the initial content of MA is very low (here, 1.77 wt% MA/Pu) while a net decrease in MA is observed in the sample with an initial content of 5 wt%. This suggests the existence of some 'equilibrium' initial MA content value beyond which a net transmutation is achievable.« less

A Multireference Density Functional Approach to the Calculation of the Excited States of Uranium Ions

DTIC Science & Technology

2007-03-01

approach. xiv A MULTIREFERENCE DENSITY FUNCTIONAL APPROACH TO THE CALCULATION OF THE EXCITED STATES OF URANIUM IONS I. Introduction Actinide chemistry, in...oxidation state of the uranium atom. Uranium, like most early actinides , can possess a wide range of oxidation states, ranging from +3 to +6, due in part...in predicting the electronic spectra for heavy element compounds. The first difficulty is that relativistic effects for actinides are significant

Predictive Modeling in Actinide Chemistry and Catalysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Ping

2016-05-16

These are slides from a presentation on predictive modeling in actinide chemistry and catalysis. The following topics are covered in these slides: Structures, bonding, and reactivity (bonding can be quantified by optical probes and theory, and electronic structures and reaction mechanisms of actinide complexes); Magnetic resonance properties (transition metal catalysts with multi-nuclear centers, and NMR/EPR parameters); Moving to more complex systems (surface chemistry of nanomaterials, and interactions of ligands with nanoparticles); Path forward and conclusions.

Burn care in South Africa: a micro cosmos of Africa.

PubMed

Rode, H; Cox, S G; Numanoglu, A; Berg, A M

2014-07-01

Burn injuries in Africa are common with between 300,000 and 17.5 million children under 5 years sustaining burn injuries annually, resulting in a high estimated fatality rate. These burns are largely environmentally conditioned and therefore preventable. The Western Cape Province in South Africa can be regarded as a prototype of paediatric burns seen on the continent, with large numbers, high morbidity and mortality rates and an area inclusive of all factors contributing to this extraordinary burden of injury. Most of the mechanisms to prevent burns are not easily modified due to the restraint of low socio-economic homes, overcrowding, unsafe appliances, multiple and complex daily demands on families and multiple psycho-social stressors. Children <4 years are at highest risk of burns with an average annual rate of 6.0/10,000 child-years. Burn care in South Africa is predominantly emergency driven and variable in terms of organization, clinical management, facilities and staffing. Various treatment strategies were introduced. The management of HIV positive children poses a problem, as well as the conflict of achieving equity of burn care for all children. Without alleviating poverty, developing minimum standards for housing, burn education, safe appliances and legislation, we will not be able to reduce the "curse of poor people" and will continue to treat the consequences.

Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

DOEpatents

Windt, Norman F.; Williams, Joe L.

1983-01-01

The invention is a process for decontaminating particulate nickel contaminated with actinide-metal fluorides. In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel containing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

Georgia Institute of Technology research on the Gas Core Actinide Transmutation Reactor (GCATR)

NASA Technical Reports Server (NTRS)

Clement, J. D.; Rust, J. H.; Schneider, A.; Hohl, F.

1976-01-01

The program reviewed is a study of the feasibility, design, and optimization of the GCATR. The program is designed to take advantage of initial results and to continue work carried out on the Gas Core Breeder Reactor. The program complements NASA's program of developing UF6 fueled cavity reactors for power, nuclear pumped lasers, and other advanced technology applications. The program comprises: (1) General Studies--Parametric survey calculations performed to examine the effects of reactor spectrum and flux level on the actinide transmutation for GCATR conditions. The sensitivity of the results to neutron cross sections are to be assessed. Specifically, the parametric calculations of the actinide transmutation are to include the mass, isotope composition, fission and capture rates, reactivity effects, and neutron activity of recycled actinides. (2) GCATR Design Studies--This task is a major thrust of the proposed research program. Several subtasks are considered: optimization criteria studies of the blanket and fuel reprocessing, the actinide insertion and recirculation system, and the system integration. A brief review of the background of the GCATR and ongoing research is presented.

Rapid determination of actinides in asphalt samples

DOE PAGES

Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.

2014-01-12

A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis If a radiological dispersive device (RDD), Improvised Nuclear Device (IND) or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organicsmore » present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well.« less

The effect of Burns & Wounds (B&W)/burdock leaf therapy on burn-injured Amish patients: a pilot study measuring pain levels, infection rates, and healing times.

PubMed

Kolacz, Nicole M; Jaroch, Mark T; Bear, Monica L; Hess, Rosanna F

2014-12-01

The purposes of this pilot study were to measure pain associated with dressing changes, assess the presence of infection, and document healing times of burn-injured Amish in central Ohio using an herbal therapy consisting of Burns and Wounds™ ointment (B&W) and burdock (Arctium ssp.) leaves. B&W contains honey, lanolin, olive oil, wheat germ oil, marshmallow root, Aloe vera gel, wormwood, comfrey root, white oak bark, lobelia inflata, vegetable glycerin, bees wax, and myrrh. A prospective, case series design guided the study within a community-based participatory research framework. Amish burn dressers provided burn care. Registered nurses monitored each case and documented findings. Pain scores were noted and burns were inspected for infection during dressing changes; healing times were measured from day of burn to complete closure of the skin. All cases were photographed. Between October 2011 and May 2013, five Amish were enrolled. All had first- and second-degree burns. B&W/burdock leaf dressing changes caused minimal or no pain; none of the burns became infected, and healing times averaged less than 14 days. The use of this herbal remedy appears to be an acceptable alternative to conventional burn care for these types of burns. The trauma of dressing changes was virtually nonexistent. Nurses working in communities with Amish residents should be aware of this herbal-based method of burn care and monitor its use when feasible. © The Author(s) 2014.

Burn epidemiology and cost of medication in paediatric burn patients.

PubMed

Koç, Zeliha; Sağlam, Zeynep

2012-09-01

Burns are common injuries that cause problems to societies throughout the world. In order to reduce the cost of burn treatment in children, it is extremely important to determine the burn epidemiology and the cost of medicines used in burn treatment. The present study used a retrospective design, with data collected from medical records of 140 paediatric patients admitted to a burn centre between 1 January 2009 and 31 December 2009. Medical records were examined to determine burn epidemiology, medication administered, dosage, and duration of use. Descriptive statistical analysis was completed for all variables; chi-square was used to examine the relationship between certain variables. It was found that 62.7% of paediatric burns occur in the kitchen, with 70.7% involving boiling water; 55.7% of cases resulted in third-degree burns, 19.3% required grafting, and mean duration of hospital stay was 27.5 ± 1.2 days. Medication costs varied between $1.38 US dollars (USD) and $14,159.09, total drug cost was $46,148.03 and average cost per patient was $329.63. In this study, the medication cost for burn patients was found to be relatively high, with antibiotics comprising the vast majority of medication expenditure. Most paediatric burns are preventable, so it is vital to educate families about potential household hazards that can be addressed to reduce the risk of a burn. Programmes are also recommended to reduce costs and the inappropriate prescribing of medication. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

Initial experience with a composite autologous skin substitute.

PubMed

Sheridan, R L; Morgan, J R; Cusick, J L; Petras, L M; Lydon, M M; Tompkins, R G

2001-08-01

Patients with large burns are surviving in increasing numbers, but there remains no durable and reliable permanent skin replacement. After initial favorable small animal experiments, a pilot trial of a composite skin replacement was performed in patients with massive burns. A composite skin replacement (CSR) was developed by culturing autologous keratinocytes on acellular allogenic dermis. This material was engrafted in patients with massive burns and compared to a matched wound covered with split thickness autograft. With human studies committee approval, 12 wounds in 7 patients were grafted with CSR while a matched control wound was covered with split thickness autograft. These 7 children had an average age of 6.4+/-1.4 yr and burn size of 75.9+/-5.0% of the body surface. Nine wounds were acute burns and three were reconstructive releases. Successful vascularization at 14 days averaged 45.7+/-14.2% (range 0-100%) in the study wounds and 98+/-1% (range 90-100%) in the control sites (P<0.05). Reduced CSR take seemed to correlate with wound colonization. All children survived. While CSR did not engraft with the reliability of standard autograft, this pilot experience is encouraging in that successful wound closure with this material is possible, if not yet dependable. It is hoped that a more mature epidermal layer may facilitate engraftment, and trials to explore this possibility are in progress.

Fluid resuscitation for major burn patients with the TMMU protocol.

PubMed

Luo, Gaoxing; Peng, Yizhi; Yuan, Zhiqiang; Cheng, Wenguang; Wu, Jun; Tang, Jin; Huang, Yuesheng; Fitzgerald, Mark

2009-12-01

Fluid resuscitation is one of the critical treatments for the major burn patient in the early phases after injury. We evaluated the practice of fluid resuscitation for severely burned patients with the Third Military Medical University (TMMU) protocol, which is most widely used in many regions of China. Patients with major burns (>30% total body surface area (TBSA)) presenting to Southwest Hospital, Third Military Medical University, between January 2005 and October 2007, were included in this study. Fluid resuscitation was initiated by the TMMU protocol. A total of 71 patients were (46 adults and 25 children) included in this study. All patients survived the first 48 h after injury smoothly and none developed abdominal compartment syndrome or other recognised complications associated with fluid resuscitation. The average quantity of fluid infused was 3.3-61.33% more than that calculated based on the TMMU protocol in both adult and paediatric groups. The average urine output during the first 24h after injury was about 1.2 ml per kg body weight per hour in the two groups, but reached 1.2 ml and 1.7 ml during the second 24h in adult and pediatric groups, respectively. This study indicates that the TMMU protocol for fluid resuscitation is a feasible option for burn patients. Individualised resuscitation - guided by the physiological response to fluid administration - is still important as in other protocols.

Interactive home telehealth and burns: A pilot study.

PubMed

Hickey, Sean; Gomez, Jason; Meller, Benjamin; Schneider, Jeffery C; Cheney, Meredith; Nejad, Shamim; Schulz, John; Goverman, Jeremy

2017-09-01

The objective of this study is to review our experience incorporating Interactive Home Telehealth (IHT) visits into follow-up burn care. A retrospective review of all burn patients participating in IHT encounters over the course of 15 months was performed. Connections were established through secure video conferencing and call-routing software. Patients connected with a personal computer or tablet and providers connected with a desktop computer with a high-definition web camera. In some cases, high-definition digital images were emailed to the provider prior to the virtual consultation. For each patient, the following was collected: (1) patient and injury demographics (diagnosis, prognosis, and clinical management), (2) total number of encounters, (3) service for each encounter (burn, psychiatry, and rehabilitation), (4) length of visit, including travel distance and time saved and, (5) complications, including re-admissions and connectivity issues. 52 virtual encounters were performed with 31 patients during the first year of the pilot project from March 2015 to June 2016. Mean age of the participant was 44 years (range 18-83 years). Mean total burn surface area of the participant was 12% (range 1-80%). Average roundtrip travel distance saved was 188 miles (range 4-822 miles). Average round trip travel time saved was 201min (range 20-564min). There were no unplanned re-admissions and no complications. Five connectivity issues were reported, none of which prevented completion of the visit. Interactive Home Telehealth is a safe and feasible modality for delivering follow-up care to burn patients. Burn care providers benefit from the potential to improve outpatient clinic utilization. Patients benefit from improved access to multiple members of their specialized burn care team, as well as cost-reductions for patient travel expenses. Future studies are needed to ensure patient and provider satisfaction and to further validate the significance, cost-effectiveness and safety. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Did enhanced afforestation cause high severity peat burn in the Fort McMurray Horse River wildfire?

NASA Astrophysics Data System (ADS)

Wilkinson, S. L.; Moore, P. A.; Flannigan, M. D.; Wotton, B. M.; Waddington, J. M.

2018-01-01

Climate change mediated drying of boreal peatlands is expected to enhance peatland afforestation and wildfire vulnerability. The water table depth-afforestation feedback represents a positive feedback that can enhance peat drying and consolidation and thereby increase peat burn severity; exacerbating the challenges and costs of wildfire suppression efforts and potentially shifting the peatland to a persistent source of atmospheric carbon. To address this wildfire management challenge, we examined burn severity across a gradient of drying in a black spruce dominated peatland that was partially drained in 1975-1980 and burned in the 2016 Fort McMurray Horse River wildfire. We found that post-drainage black spruce annual ring width increased substantially with intense drainage. Average (±SD) basal diameter was 2.6 ± 1.2 cm, 3.2 ± 2.0 cm and 7.9 ± 4.7 cm in undrained (UD), moderately drained (MD) and heavily drained (HD) treatments, respectively. Depth of burn was significantly different between treatments (p < 0.001) and averaged (±SD) 2.5 ± 3.5 cm, 6.4 ± 5.0 cm and 36.9 ± 29.6 cm for the UD, MD and HD treatments, respectively. The high burn severity in the HD treatment included 38% of the treatment that experienced combustion of the entire peat profile, and we estimate that overall 51% of the HD pre-burn peat carbon stock was lost. We argue that the HD treatment surpassed an ecohydrological tipping point to high severity peat burn that may be identified using black spruce stand characteristics in boreal plains bogs. While further studies are needed, we believe that quantifying this threshold will aid in developing effective adaptive management techniques and protecting boreal peatland carbon stocks.

Factors affecting the depth of burns occurring in medical institutions.

PubMed

Cho, Young Soon; Choi, Young Hwan; Yoon, Cheonjae; You, Je Sung

2015-05-01

Most cases of burns occurring in medical institutions are associated with activities involving heat. It is very difficult to detect these burns. To date, there are few reports on burns occurring in medical institutions. The purpose of this paper was to analyze the etiology of burns occurring in medical institutions and to elucidate the factors affecting burn depth. We conducted a retrospective analysis of the medical records of patients who visited our center from April 2008 to February 2013. This study enrolled all patients with burns occurring in the medical institution during or related to treatment. We excluded burn patients whose burns were not related to treatment (for example, we excluded patients with scalding burns that occurred in the hospital cafeteria and pediatric patients with hot water burns from the water purifier). However, patients with burns that occurred in the recovery room after general anesthesia were included. A total of 115 patients were enrolled in this study. The average patient age was 41.5 years, with more women than men (M:F=31:84). There were 29 cases (25.3%) of superficial burns (first-degree and superficial second-degree) and 86 cases (74.7%) of deep burns (deep second-degree and third-degree). Hot packs were the most common cause of burns (27 cases, 23.5%), followed by laser therapy, heating pads, and grounding pads, accounting for 15 cases each. There were 89 cases (77.4%) of contact burns and 26 cases (22.6%) of non-contact burns. The most common site of burns was the lower extremities (41 cases, 35.7%). The burn site and contact burns were both factors affecting burn depth. The rate of deep burns was higher in patients with contact burns than in those with non-contact burns (odds ratio 4.26) and was associated with lower body burns (odds ratio 2.85). In burns occurring in medical institutions, there is a high probability of a deep burn if it is a contact burn or occurs in the lower body. Therefore, safety guidelines are needed for the use of hot packs, heating pads, and grounding pads to prevent such incidents. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Particulate matter characteristics during agricultural waste burning in Taichung City, Taiwan.

PubMed

Cheng, Man-Ting; Horng, Chuen-Liang; Su, Yi-Ru; Lin, Li-Kai; Lin, Yu-Chi; Chou, Charles C-K

2009-06-15

Agricultural waste burning is performed after harvest periods in June and November in Taiwan. Typically, farmers use open burning to dispose of excess rice straw. PM(2.5) and PM(2.5-10) measurements were conducted at National Chung Hsing University in Taichung City using a dichotomous sampler. The sampling times were during straw burning periods after rice harvest during 2002-2005. Ionic species including SO(4)(2-), NO(3)(-), NH(4)(+), K(+), Ca(2+), Cl(-) and Na(+) and carbonaceous species (EC and OC) in PM(2.5) and PM(2.5-10) were analyzed. The results showed that the average PM(2.5) and PM(2.5-10) concentrations were 123.6 and 31.5 microg m(-3) during agricultural waste burning periods and 32.6 and 21.4 microg m(-3) during non-waste burning periods, respectively. The fine aerosol ionic species including Cl(-), K(+) and NO(3)(-) increased 11.0, 6.7 and 5.5 times during agricultural burning periods compared with periods when agricultural waste burning is not performed. K(+) was found mainly in the fine mode during agricultural burning. High nitrogen oxidation ratio was found during agricultural waste burning periods which might be caused by the conversion of Nitrogen dioxide (NO(2)) to NO(3)(-). It is concluded that agricultural waste burning with low dispersion often causes high PM(2.5) and gases pollutant events.

40 CFR Table 1 to Subpart Uuu of... - Metal HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... incinerator or waste heat boiler in which you burn auxiliary or in supplemental liquid or solid fossil fuel... fossil fuel; and the opacity of emissions must not exceed 30 percent, except for one 6-minute average... burn auxiliary or supplemental liquid or solid fossil fuel, the incremental rate of PM must not exceed...

40 CFR Table 1 to Subpart Uuu of... - Metal HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... incinerator or waste heat boiler in which you burn auxiliary or in supplemental liquid or solid fossil fuel... fossil fuel; and the opacity of emissions must not exceed 30 percent, except for one 6-minute average... burn auxiliary or supplemental liquid or solid fossil fuel, the incremental rate of PM must not exceed...

Increases in maximum stream temperatures after slash burning in a small experimental watershed.

Treesearch

Al Levno; Jack Rothacher

1969-01-01

The first year after slash was burned on a 237-acre clearcut watershed in the Cascade Range of Oregon, average maximum water temperatures increased 13°, 14°, and 12°F, during June, July, and August. A maximum stream temperature of 75°F. persisted for 3 hours on a day in July.

Small mammal populations after a wildfire in northeast Minnesota.

Treesearch

Richard R. Buech; Karl Siderits; Robert E. Radtke; Howard L. Sheldon; Donald Elsing

1977-01-01

Small mammals were studied shortly after a large wildfire in northeast Minnesota. An average of only 16 as many small mammals were in three forest communities that had burned than were in comparable unburned areas. The greatest reduction was for the red-backed vole. An analysis of population attributes suggests that deer mice immigrated to the burned area. Small...

An infrared spectral database for detection of gases emitted by biomass burning

Treesearch

Timothy J. Johnson; Luisa T. M. Profeta; Robert L. Sams; David W. T. Griffith; Robert L. Yokelson

2010-01-01

We report the construction of a database of infrared spectra aimed at detecting the gases emitted by biomass burning. The project uses many of the methods of the Pacific Northwest National Laboratory (PNNL) infrared database, but the selection of the species and special experimental considerations are optimized. Each spectrum is a weighted average derived from 10 or...

From carbon to actinides: A new universal 1MV accelerator mass spectrometer at ANSTO

NASA Astrophysics Data System (ADS)

Wilcken, K. M.; Hotchkis, M.; Levchenko, V.; Fink, D.; Hauser, T.; Kitchen, R.

2015-10-01

A new 1 MV NEC pelletron AMS system at ANSTO is presented. The spectrometer comprises large radius magnets for actinide measurements. A novel feature of the system is fast switching between isotopes both at low and high energy sections allowing measurements of up to 8 isotopes within a single sequence. Technical details and layout of the spectrometer is presented. Performance data for 14C, 10Be, 26Al and actinides demonstrate the system is ready for routine AMS measurements.

Magnetic susceptibilities of actinide 3d-metal intermetallic compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muniz, R.B.; d'Albuquerque e Castro, J.; Troper, A.

1988-04-15

We have numerically calculated the magnetic susceptibilities which appear in the Hartree--Fock instability criterion for actinide 3d transition-metal intermetallic compounds. This calculation is based on a previous tight-binding description of these actinide-based compounds (A. Troper and A. A. Gomes, Phys. Rev. B 34, 6487 (1986)). The parameters of the calculation, which starts from simple tight-binding d and f bands are (i) occupation numbers, (ii) ratio of d-f hybridization to d bandwidth, and (iii) electron-electron Coulomb-type interactions.

Pocket formula for nuclear deformations of actinides

NASA Astrophysics Data System (ADS)

Manjunatha, H. C.; Sridhar, K. N.

2018-06-01

We have formulated a pocket formula for quadrupole (β2), octupole (β3), hexadecapole (β4) and hexacontatetrapole (β6) deformation of the nuclear ground state of all isotopes of actinide nuclei (89 < Z < 103). This formula is first of its kind and produces a nuclear deformation of all isotopes actinide nuclei 89 < Z < 103 with simple inputs of Z and A. Hence, this formula is useful in the fields of nuclear physics to study the structure and interaction of nuclei.

Method for extracting lanthanides and actinides from acid solutions

DOEpatents

Horwitz, E. Philip; Kalina, Dale G.; Kaplan, Louis; Mason, George W.

1985-01-01

A process for the recovery of actinide and lanthanide values from aqueous acidic solutions with an organic extractant having the formula: ##STR1## where .phi. is phenyl, R.sup.1 is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R.sup.2 is an alkyl containing from 3 to 6 carbon atoms. The process is suitable for the separation of actinide and lanthanide values from fission product values found together in high level nuclear reprocessing waste solutions.

RAPID DETERMINATION OF ACTINIDES IN URINE BY INDUCTIVELY-COUPLED PLASMA MASS SPECTROMETRY AND ALPHA SPECTROMETRY: A HYBRID APPROACH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maxwell, S.; Jones, V.

2009-05-27

A new rapid separation method that allows separation and preconcentration of actinides in urine samples was developed for the measurement of longer lived actinides by inductively coupled plasma mass spectrometry (ICP-MS) and short-lived actinides by alpha spectrometry; a hybrid approach. This method uses stacked extraction chromatography cartridges and vacuum box technology to facilitate rapid separations. Preconcentration, if required, is performed using a streamlined calcium phosphate precipitation. Similar technology has been applied to separate actinides prior to measurement by alpha spectrometry, but this new method has been developed with elution reagents now compatible with ICP-MS as well. Purified solutions are splitmore » between ICP-MS and alpha spectrometry so that long- and short-lived actinide isotopes can be measured successfully. The method allows for simultaneous extraction of 24 samples (including QC samples) in less than 3 h. Simultaneous sample preparation can offer significant time savings over sequential sample preparation. For example, sequential sample preparation of 24 samples taking just 15 min each requires 6 h to complete. The simplicity and speed of this new method makes it attractive for radiological emergency response. If preconcentration is applied, the method is applicable to larger sample aliquots for occupational exposures as well. The chemical recoveries are typically greater than 90%, in contrast to other reported methods using flow injection separation techniques for urine samples where plutonium yields were 70-80%. This method allows measurement of both long-lived and short-lived actinide isotopes. 239Pu, 242Pu, 237Np, 243Am, 234U, 235U and 238U were measured by ICP-MS, while 236Pu, 238Pu, 239Pu, 241Am, 243Am and 244Cm were measured by alpha spectrometry. The method can also be adapted so that the separation of uranium isotopes for assay is not required, if uranium assay by direct dilution of the urine sample is preferred instead. Multiple vacuum box locations may be set-up to supply several ICP-MS units with purified sample fractions such that a high sample throughput may be achieved, while still allowing for rapid measurement of short-lived actinides by alpha spectrometry.« less

Forest fires in Mediterranean countries: CO2 emissions and mitigation possibilities through prescribed burning.

PubMed

Vilén, Terhi; Fernandes, Paulo M

2011-09-01

Forest fires are an integral part of the ecology of the Mediterranean Basin; however, fire incidence has increased dramatically during the past decades and fire is expected to become more prevalent in the future due to climate change. Fuel modification by prescribed burning reduces the spread and intensity potential of subsequent wildfires. We used the most recently published data to calculate the average annual wildfire CO(2) emissions in France, Greece, Italy, Portugal and Spain following the IPCC guidelines. The effect of prescribed burning on emissions was calculated for four scenarios of prescribed burning effectiveness based on data from Portugal. Results show that prescribed burning could have a considerable effect on the carbon balance of the land use, land-use change and forestry (LULUCF) sector in Mediterranean countries. However, uncertainty in emission estimates remains large, and more accurate data is needed, especially regarding fuel load and fuel consumption in different vegetation types and fuel layers and the total area protected from wildfire per unit area treated by prescribed burning, i.e. the leverage of prescribed burning.

14 CFR Appendix F to Part 25

Code of Federal Regulations, 2012 CFR

2012-01-01

... not exceed 6 inches and the average flame time after removal of the flame source may not exceed 15... means. The average burn length may not exceed 8 inches, and the average flame time after removal of the... Standards Institute, 1430 Broadway, New York, NY 10018). If the film travels through ducts, the ducts must...

14 CFR Appendix F to Part 25

Code of Federal Regulations, 2011 CFR

2011-01-01

... not exceed 6 inches and the average flame time after removal of the flame source may not exceed 15... means. The average burn length may not exceed 8 inches, and the average flame time after removal of the... Standards Institute, 1430 Broadway, New York, NY 10018). If the film travels through ducts, the ducts must...

14 CFR Appendix F to Part 25

Code of Federal Regulations, 2010 CFR

2010-01-01

... not exceed 6 inches and the average flame time after removal of the flame source may not exceed 15... means. The average burn length may not exceed 8 inches, and the average flame time after removal of the... Standards Institute, 1430 Broadway, New York, NY 10018). If the film travels through ducts, the ducts must...

14 CFR Appendix F to Part 25

Code of Federal Regulations, 2013 CFR

2013-01-01

... not exceed 6 inches and the average flame time after removal of the flame source may not exceed 15... means. The average burn length may not exceed 8 inches, and the average flame time after removal of the... Standards Institute, 1430 Broadway, New York, NY 10018). If the film travels through ducts, the ducts must...

Use of healthcare a long time after severe burn injury; relation to perceived health and personality characteristics.

PubMed

Wikehult, B; Willebrand, M; Kildal, M; Lannerstam, K; Fugl-Meyer, A R; Ekselius, L; Gerdin, B

2005-08-05

The aim of the study was to evaluate which factors are associated with the use of healthcare a long time after severe burn injury. After a review process based on clinical reasoning, 69 former burn patients out of a consecutive group treated at the Uppsala Burn Unit from 1980--1995 were visited in their homes and their use of care and support was assessed in a semi-structured interview. Post-burn health was assessed with the Burn-Specific Health Scale-Brief (BSHS-B) and personality was assessed with the Swedish universities Scales of Personality (SSP). The participants were injured on average eight years previously. Thirty-four had current contact with healthcare due to their burn injury and had significantly lower scores on three BSHS-B-domains: Simple Abilities, Work and Hand function, and significantly higher scores for the SSP-domain Neuroticism and the SSP-scales Stress Susceptibility, Lack of Assertiveness, and lower scores for Social Desirability. There was no relation to age, gender, time since injury, length of stay, or to the surface area burned. A routine screening of personality traits as a supplement to long-term follow-ups may help in identifying the patient's need for care.

Clinical and demographic features of pediatric burns in the eastern provinces of Turkey

PubMed Central

2011-01-01

Background The aim of this study is to perform a retrospective analysis of the causes of burns observed in children in the eastern provinces of Turkey. Method In this study, patients were studied retrospectively with regard to their age, sex, cause of burns, seasonal variations, social and economic factors, length of hospital stay, burned body surface area, medical history, site of injury, and mortality. Results A total of 125 patients undergoing inpatient treatment were male, (53.2%) and 110 were female (46.8%). The most common causes of burns in patients treated on an inpatient basis were scald burns (65.5%) and tandir burns (15.7%). The mean total body surface area of all the patients was 12.17+9.86%. When the patients were grouped according to tandir, cauldron, and others burn causes, a significant difference was seen between the in burn percentages caused by tandir and cauldron burns and other causes (p < 0.001). Higher burn percentages were seen for cauldron burns than for tandir burns (p < 0.05). The average length of hospital stay was 17.67+13.64 days. When the patients were grouped according to burn causes (tandir, cauldron, and others), a significant difference was determined between the hospitalization periods of patients with tandir burns and other burn causes (p = 0.001) The most commonly proliferating microorganism in burned areas was Pseudomonas aeruginosa (20.4%). Of the 235 patients, 61 were treated in operating rooms. During the 24-month period of the study, 2 of the 235 patients died (0.85%). Conclusion Pediatric burns in the eastern part of Turkey are different from those in other parts of Turkey, as well as in other countries. Due to the lifestyle of the region, tandir and cauldron burns, which cause extensive burn areas and high morbidity, are frequently seen in children. Therefore, precautions and educational programs related to the use of tandirs and cauldrons are needed in this region. PMID:21244683

Ion Thermal Decoupling and Species Separation in Shock-Driven Implosions

DOE PAGES

Rinderknecht, Hans G.; Rosenberg, M. J.; Li, C. K.; ...

2015-01-14

Here, anomalous reduction of the fusion yields by 50% and anomalous scaling of the burn-averaged ion temperatures with the ion-species fraction has been observed for the first time in D 3He-filled shock-driven inertial confinement fusion implosions. Two ion kinetic mechanisms are used to explain the anomalous observations: thermal decoupling of the D and 3He populations and diffusive species separation. The observed insensitivity of ion temperature to a varying deuterium fraction is shown to be a signature of ion thermal decoupling in shock-heated plasmas. The burn-averaged deuterium fraction calculated from the experimental data demonstrates a reduction in the average core deuteriummore » density, as predicted by simulations that use a diffusion model. Accounting for each of these effects in simulations reproduces the observed yield trends.« less

[Hand burns in children and Aquacel(®) Burn gloves, an alternative to prolonged hospital stays].

PubMed

Ridel, P; Perrot, P; Truffandier, M V; Bellier-Waast, F; Duteille, F

2015-04-01

Occlusive dressings for second-degree hand burns in children must prevent infection and promote healing. For good management of analgesia, these treatments often require children to be hospitalized. Our goal was to find an alternative to conventional care protocol that would reduce the number of dressings and therefore the length of hospitalization. We report our experience with the use of Aquacel(®) Burn. Non-randomized monocentric prospective study was conducted from 2012 to 2014. The glove was used in the operating room within 72hours after the burn in children younger than 15 years old with isolated superficial to deep 2nd degree hand burns. Once the glove was perfectly stuck to the burn, the children could go back home. We saw them 10 to 12 days after the accident to be sure there was no indication of skin graft. Twenty gloves were used in 16 children aged from 16 months to 13 years. The average length of stay (ALOS) was five days to put the glove on and one day to remove it. Four hands were grafted. Once we get used to the product, Aquacel(®) Burn gloves have reduced the ALOS before skin graft in cases of isolated hand burns in children. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Fusion barrier characteristics of actinides

NASA Astrophysics Data System (ADS)

Manjunatha, H. C.; Sridhar, K. N.

2018-03-01

We have studied fusion barrier characteristics of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations. After the calculation of fusion barrier heights and positions, we have searched for their parameterization. We have achieved the empirical formula for fusion barrier heights (VB), positions (RB), curvature of the inverted parabola (ħω) of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations (6

Electronic structure of free and doped actinides: N and Z dependences of energy levels and electronic structure parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulagin, N.

2005-02-15

Theoretical study of electronic structure of antinide ions and its dependence on N and Z are presented in this paper. The main 5f{sup N} and excited 5f{sup N}n'l'{sup N'} configurations of actinides have been studied using Hartree-Fock-Pauli approximation. Results of calculations of radial integrals and the energy of X-ray lines for all 5f ions with electronic state AC{sup +1}-AC{sup +4} show approximate dependence on N and Z. A square of N and cubic of Z are ewalized for the primary electronic parameters of the actinides. Theoretical values of radial integrals for free actinides and for ions in a cluster AC{supmore » +n}:[L]{sub k} are compared, too.« less

Importance of the (n,gamma) Cm-247 Evaluation on Neutron Emission in Fast Reactor Fuel Cycle Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benoit Forget; Mehdi Asgari; Rodolfo M. Ferrer

2007-11-01

As part of the GNEP program, it is envisioned to build a fast reactor for the transmutation of minor actinides. The spent nuclear fuel from the current fleet of light water reactors would be recycled, the current baseline is the UREX+1a process, and would act as a feed for the fast reactor. As the fuel is irradiated in a fast reactor a certain quantity of minor actinides would thus build up in the fuel stream creating possible concerns with the neutron emission of these minor actinides for fuel transportation, handling and fabrication. Past neutronic analyses had not tracked minor actinidesmore » above Cm-246 in the transmutation chain, because of the small influence on the overall reactor performance and cycle parameters. However, when trying to quantify the neutron emission from the recycled fuel with high minor actinide content, these higher isotopes play an essential role and should be included in the analysis. In this paper, the influence of tracking these minor actinides on the calculated neutron emission is presented. Also presented is the particular influence of choosing a different evaluated cross section data set to represent the minor actinides above Cm-246. The first representation uses the cross-sections provided by MC2-2 for all isotopes, while the second representation uses infinitely diluted ENDF/BVII.0 cross-sections for Cm-247 to Cf-252 and MC2-2 for all other isotopes.« less

Support for Students and Young Scientists to Participate in the 2009 Actinides Conference to be held in San Francisco, CA, Sunday, 12 July 2009 -- Friday, 17 July 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, Kenneth N.

2011-04-08

Early career scientist were provided support to attend and participate in the Actinides 2009 (AN2009) International Conference held in San Francisco, California from 12-17 July 2011. This is the premier conference in the field of actinide chemistry, physics, and materials science of the actinide elements. Participation in the preeminent scientific meeting in actinide science keeps the U.S at the forefront of developments in this key field. The specific involvement of early career scientists combats the loss of expertise in the aforementioned critical areas related to f-element chemistry such as energy, homeland, and environmental security. Without these trained scientists, the U.S.more » will not be able to properly exploit nuclear technology to its fullest and will not be able to address its energy needs in either an environmentally safe or cost–effective manner nor will it be able to provide for its national defense. Furthermore, the early career scientists added greatly to the scientific content of the meeting and stimulates early career scientists to remain in the filed of actinide science. Providing support for participation in the AN2009 Conference via registration fee waivers, hotel cost support, and travel cost support, was extremely effective in securing the participation of early career scientists that would have not otherwise been able to attend.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kersting, Annie B.; Zavarin, Mavrik

A major scientific challenge in environmental sciences is to identify the dominant processes controlling actinide transport in the environment. It is estimated that currently, over 2200 metric tons of plutonium (Pu) have been deposited in the subsurface worldwide, a number that increases yearly with additional spent nuclear fuel (Ewing et al., 2010). Plutonium has been shown to migrate on the scale of kilometers, giving way to a critical concern that the fundamental biogeochemical processes that control its behavior in the subsurface are not well understood (Kersting et al., 1999; Novikov et al., 2006; Santschi et al., 2002). Neptunium (Np) ismore » less prevalent in the environment; however, it is predicted to be a significant long-term dose contributor in high-level nuclear waste. Our focus on Np chemistry in this Science Plan is intended to help formulate a better understanding of Pu redox transformations in the environment and clarify the differences between the two long-lived actinides. The research approach of our Science Plan combines (1) Fundamental Mechanistic Studies that identify and quantify biogeochemical processes that control actinide behavior in solution and on solids, (2) Field Integration Studies that investigate the transport characteristics of Pu and test our conceptual understanding of actinide transport, and (3) Actinide Research Capabilities that allow us to achieve the objectives of this Scientific Focus Area (SFA and provide new opportunities for advancing actinide environmental chemistry. These three Research Thrusts form the basis of our SFA Science Program (Figure 1).« less

Final Project Report for ER15351 “A Study of New Actinide Zintl Ion Materials”

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter K. Dorhout

2007-11-12

The structural chemistry of actinide main-group metal materials provides the fundamental basis for the understanding of structural coordination chemistry and the formation of materials with desired or predicted structural features. The main-group metal building blocks, comprising sulfur-group, phosphorous-group, or silicon-group elements, have shown versatility in oxidation state, coordination, and bonding preferences. These building blocks have allowed us to elucidate a series of structures that are unique to the actinide elements, although we can find structural relationships to transition metal and 4f-element materials. In the past year, we investigated controlled metathesis and self-propagating reactions between actinide metal halides and alkali metalmore » salts of main-group metal chalcogenides such as K-P-S salts. Ternary plutonium thiophosphates have resulted from these reactions at low temperature in sealed ampules. we have also focused efforts to examine reactions of Th, U, and Pu halide salts with other alkali metal salts such as Na-Ge-S and Na-Si-Se and copper chloride to identify if self-propagating reactions may be used as a viable reaction to prepare new actinide materials and we prepared a series of U and Th copper chalcogenide materials. Magnetic measurements continued to be a focus of actinide materials prepared in our laboratory. We also contributed to the XANES work at Los Alamos by preparing materials for study and for comparison with environmental samples.« less

The use of MOX caramel fuel mixed with 241Am, 242mAm and 243Am as burnable absorber actinides for the MTR research reactors.

PubMed

Shaaban, Ismail; Albarhoum, Mohamad

2017-07-01

The MOX (UO 2 &PuO 2 ) caramel fuel mixed with 241 Am, 242m Am and 243 Am as burnable absorber actinides was proposed as a fuel of the MTR-22MW reactor. The MCNP4C code was used to simulate the MTR-22MW reactor and estimate the criticality and the neutronic parameters, and the power peaking factors before and after replacing its original fuel (U 3 O 8 -Al) by the MOX caramel fuel mixed with 241 Am, 242m Am and 243 Am actinides. The obtained results of the criticality, the neutronic parameters, and the power peaking factors for the MOX caramel fuel mixed with 241 Am, 242m Am and 243 Am actinides were compared with the same parameters of the U 3 O 8 -Al original fuel and a maximum difference is -6.18% was found. Additionally, by recycling 2.65% and 2.71% plutonium and 241 Am, 242m Am and 243 Am actinides in the MTR-22MW reactor, the level of 235 U enrichment is reduced from 4.48% to 3% and 2.8%, respectively. This also results in the reduction of the 235 U loading by 32.75% and 37.22% for the 2.65%, the 2.71% plutonium and 241 Am, 242m Am and 243 Am actinides, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Preliminary results in single-step wound closure procedure of full-thickness facial burns in children by using the collagen-elastin matrix and review of pediatric facial burns.

PubMed

Demircan, Mehmet; Cicek, Tugrul; Yetis, Muhammed Ikbal

2015-09-01

Management of full-thickness facial burns remains one of the greatest challenges. Controversy exists among surgeons regarding the use of early excision for facial burns. Unfortunately, delayed excision of deeper burns often results in more scarring and subsequent reconstruction becomes more difficult. A collagen-elastin matrix is used to improve the quality of the reconstructed skin, to reduce scarring and to prevent wound contraction. It serves as a foundation for split thickness skin graft and enhances short and long-term results. We report the usage of a collagen-elastin matrix during single-step wound closure technique of severe full-thickness facial burns in 15 children with large burned body surface area, and also we review the literature about pediatric facial burns. There were 15 pediatric patients with severe facial burns, 8 girls and 7 boys ranging in age from 10 months to 12 years, mean age 7 years and 6 months old. The facial burn surface area (FBSA) among the patients includes seven patients with 100%, five with 75%, and three with 50%. The average total body surface area (TBSA) for the patients was 72%, ranging between 50 and 90%. 5 of the patients' admissions were late, more than four days after burns while the rest of the patients were admitted within the first four days (acute admission time). The burns were caused by flame in eight of the patients, bomb blast in four, and scalding in three. All patients were treated by the simultaneous application of the collagen-elastin matrix and an unmeshed split thickness skin graft at Turgut Özal Medical Center, Pediatric Burn Center, Malatya, Turkey. After the treatment only two patients needed a second operation for revision of the grafts. All grafts transplanted to the face survived. The average Vancouver scar scales (VSS) were 2.55±1.42, ranging between one and six, in the first 10 of 15 patients at the end of 6 months postoperatively. VSS measurements of the last 5 patients were not taken since the 6 months postoperative period was not over. In regard to early results, graft quality was close to normal skin in terms of vascularity, elasticity, pliability, texture and color. Esthetic and functional results have been encouraging. This study shows us that the collagen-elastin matrix as a dermal substitute is a useful adjunct, which may result in quick healing with satisfying esthetic and functional results. It also may enhance short and long-term results in after burn facial wound closure in children. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Distributions of Trace Gases and Aerosols during the Dry Biomass Burning Season in Southern Africa

NASA Technical Reports Server (NTRS)

Sinha, Parikhit; Hobbs, Peter V.; Yokelson, Robert J.; Blake, Donald R.; Gao, Song; Kirchstetter, Thomas W.

2003-01-01

Vertical profiles in the lower troposphere of temperature, relative humidity, sulfur dioxide (SO2), ozone (O3), condensation nuclei (CN), and carbon monoxide (CO), and horizontal distributions of twenty gaseous and particulate species, are presented for five regions of southern Africa during the dry biomass burning season of 2000. The regions are the semiarid savannas of northeast South Africa and northern Botswana, the savanna-forest mosaic of coastal Mozambique, the humid savanna of southern Zambia, and the desert of western Namibia. The highest average concentrations of carbon dioxide (CO2), CO, methane (CH4), O3, black particulate carbon, and total particulate carbon were in the Botswana and Zambia sectors (388 and 392 ppmv, 369 and 453 ppbv, 1753 and 1758 ppbv, 79 and 88 ppbv, 2.6 and 5.5 micrograms /cubic meter and 13.2 and 14.3 micrograms/cubic meter). This was due to intense biomass burning in Zambia and surrounding regions. The South Africa sector had the highest average concentrations of SO2, sulfate particles, and CN (5.1 ppbv, 8.3 micrograms/cubic meter, and per 6400 cubic meter , respectively), which derived from biomass burning and electric generation plants and mining operations within this sector. Air quality in the Mozambique sector was similar to the neighboring South Africa sector. Over the arid Namibia sector there were polluted layers aloft, in which average SO2, O3, and CO mixing ratios (1.2 ppbv, 76 ppbv, and 3 10 ppbv, respectively) were similar to those measured over the other more polluted sectors. This was due to transport of biomass smoke from regions of widespread savanna burning in southern Angola. Average concentrations over all sectors of CO2 (386 +/- 8 ppmv), CO (261 +/- 81 ppbv), SO2 (2.5 +/- 1.6 ppbv), O3 (64 +/- 13 ppbv), black particulate carbon (2.3 +/- 1.9 microgram/cubic meter), organic particulate carbon (6.2 +/- 5.2 microgram/cubic meter), total particle mass (26.0 +/- 4.7 microgram/cubic meter), and potassium particles (0.4 +- 0.1 microgram/cubic meter) were comparable to those in polluted, urban air. Since the majority of the measurements in this study were obtained in locations well removed from industrial sources of pollution, the high average concentrations of pollutants reflect the effects of widespread biomass burning. On occasions, relatively thin (-0.5 km) layers of remarkably clean air were located at -3 km above mean sea level, sandwiched between heavily polluted air. The data presented here can be used for inputs to and validation of regional and global atmospheric chemical models.

Distributions of trace gases and aerosols during the dry biomass burning season in southern Africa

NASA Astrophysics Data System (ADS)

Sinha, Parikhit; Hobbs, Peter V.; Yokelson, Robert J.; Blake, Donald R.; Gao, Song; Kirchstetter, Thomas W.

2003-09-01

Vertical profiles in the lower troposphere of temperature, relative humidity, sulfur dioxide (SO2), ozone (O3), condensation nuclei (CN), and carbon monoxide (CO), and horizontal distributions of twenty gaseous and particulate species, are presented for five regions of southern Africa during the dry biomass burning season of 2000. The regions are the semiarid savannas of northeast South Africa and northern Botswana, the savanna-forest mosaic of coastal Mozambique, the humid savanna of southern Zambia, and the desert of western Namibia. The highest average concentrations of carbon dioxide (CO2), CO, methane (CH4), O3, black particulate carbon, and total particulate carbon were in the Botswana and Zambia sectors (388 and 392 ppmv, 369 and 453 ppbv, 1753 and 1758 ppbv, 79 and 88 ppbv, 2.6 and 5.5 μg m-3, and 13.2 and 14.3 μg m-3). This was due to intense biomass burning in Zambia and surrounding regions. The South Africa sector had the highest average concentrations of SO2, sulfate particles, and CN (5.1 ppbv, 8.3 μg m-3, and 6400 cm-3, respectively), which derived from biomass burning and electric generation plants and mining operations within this sector. Air quality in the Mozambique sector was similar to the neighboring South Africa sector. Over the arid Namibia sector there were polluted layers aloft, in which average SO2, O3, and CO mixing ratios (1.2 ppbv, 76 ppbv, and 310 ppbv, respectively) were similar to those measured over the other more polluted sectors. This was due to transport of biomass smoke from regions of widespread savanna burning in southern Angola. Average concentrations over all sectors of CO2 (386 ± 8 ppmv), CO (261 ± 81 ppbv), SO2 (2.5 ± 1.6 ppbv), O3 (64 ± 13 ppbv), black particulate carbon (2.3 ± 1.9 μg m-3), organic particulate carbon (6.2 ± 5.2 μg m-3), total particle mass (26.0 ± 4.7 μg m-3), and potassium particles (0.4 ± 0.1 μg m-3) were comparable to those in polluted, urban air. Since the majority of the measurements in this study were obtained in locations well removed from industrial sources of pollution, the high average concentrations of pollutants reflect the effects of widespread biomass burning. On occasions, relatively thin (˜0.5 km) layers of remarkably clean air were located at ˜3 km above mean sea level, sandwiched between heavily polluted air. The data presented here can be used for inputs to and validation of regional and global atmospheric chemical models.

Use of Ultra Rapid Opioid Detoxification in the Treatment of US Military Burn Casualties

DTIC Science & Technology

2011-07-01

consumption, in morphine equivalent units , was noted both before and after detoxification. Results: Six burn patients (average age, 31 years) underwent...at time of detoxification was 200 units daily. Mean outpatient consumption for opioids after the intervention was minimal (25 units /d). No...patients, including fever, diaphoresis, anxiety, in- somnia, rhinorhea, lacrimation , chills, myalgias, irritability, abdominal cramping, nausea/vomiting

Effects of Alternative Thinning Regimes and Prescribed Burning in Natural, Even-Aged Loblolly-Shortleaf Pine Stands: 25 Year Results

Treesearch

Michael D. Cain; Michael G. Shelton

2003-01-01

In southeastern Arkansas, pine growth was monitored for 19 yr after mechanically strip thinning a dense, naturally regenerated, even-aged stand of 6-yr-old loblolly pines (Pinus taeda L.) and shortleaf pines (P. echinata Mill.) that averaged 16,600 stems/UC. Prescribed winter burns were conducted biennially between ages 9 and 20...

Conifer regeneration on burned and unburned clearcuts on granitic soils of the Klamath National Forest

Treesearch

Danny Heavilan

1977-01-01

Regeneration was studied on a mixed conifer stand on granitic soils on the Klamath National Forest. Six years after logging and hand planting with Douglas-fir, stocking and growth on cutblocks where slash had been broadcast burned was compared with that on similar unburned cutblocks. Conifers were seven times more plentiful on the unburned areas, the average height of...

Response to prescribed burning of 5-year-old hardwood regeneration on a mesic site in the Southern Appalachian Mountains

Treesearch

W. Henry McNab; Erik C. Berg; Ted M. Oprean

2013-01-01

Five years after a Southern Appalachian cove was regenerated, vegetation was dominated by a dense stand of yellow-poplar (Liriodendron tulipifera), which averaged 9,181±13,042 stems per acre, and other mesophytic hardwood seedlings and saplings. The stand was prescribed burned during late spring to improve habitat for turkey by reducing density of...

Contribution of solid fuel, gas combustion, or tobacco smoke to indoor air pollutant concentrations in Irish and Scottish homes.

PubMed

Semple, S; Garden, C; Coggins, M; Galea, K S; Whelan, P; Cowie, H; Sánchez-Jiménez, A; Thorne, P S; Hurley, J F; Ayres, J G

2012-06-01

  There are limited data describing pollutant levels inside homes that burn solid fuel within developed country settings with most studies describing test conditions or the effect of interventions. This study recruited homes in Ireland and Scotland where open combustion processes take place. Open combustion was classified as coal, peat, or wood fuel burning, use of a gas cooker or stove, or where there is at least one resident smoker. Twenty-four-hour data on airborne concentrations of particulate matter<2.5 μm in size (PM2.5), carbon monoxide (CO), endotoxin in inhalable dust and carbon dioxide (CO2), together with 2-3 week averaged concentrations of nitrogen dioxide (NO2) were collected in 100 houses during the winter and spring of 2009-2010. The geometric mean of the 24-h time-weighted-average (TWA) PM2.5 concentration was highest in homes with resident smokers (99 μg/m3--much higher than the WHO 24-h guidance value of 25 μg/m3). Lower geometric mean 24-h TWA levels were found in homes that burned coal (7 μg/m3) or wood (6 μg/m3) and in homes with gas cookers (7 μg/m3). In peat-burning homes, the average 24-h PM2.5 level recorded was 11 μg/m3. Airborne endotoxin, CO, CO2, and NO2 concentrations were generally within indoor air quality guidance levels. Little is known about indoor air quality (IAQ) in homes that burn solid or fossil-derived fuels in economically developed countries. Recent legislative changes have moved to improve IAQ at work and in enclosed public places, but there remains a real need to begin the process of quantifying the health burden that arises from indoor air pollution within domestic environments. This study demonstrates that homes in Scotland and Ireland that burn solid fuels or gas for heating and cooking have concentrations of air pollutants generally within guideline levels. Homes where combustion of cigarettes takes place have much poorer air quality. © 2011 John Wiley & Sons A/S.

Actinide Sputtering Induced by Fission with Ultra-cold Neutrons

NASA Astrophysics Data System (ADS)

Venuti, Michael; Shi, Tan; Fellers, Deion; Morris, Christopher; Makela, Mark

2017-09-01

Understanding the effects of actinide sputtering due to nuclear fission is important for a wide range of applications, including nuclear fuel storage, space science, and national defense. A new program at the Los Alamos Neutron Science Center uses ultracold neutrons (UCN) to induce fission in actinides such as uranium and plutonium. By controlling the energy of UCN, it is possible to induce fission at the sample surface within a well-defined depth. It is therefore an ideal tool for studying the effects of fission-induced sputtering as a function of interaction depth. Since the mechanism for fission-induced surface damage is not well understood, especially for samples with a surface oxide layer, this work has the potential to separate the various damage mechanisms proposed in previous works. During the irradiation with UCN, fission events are monitored by coincidence counting between prompt gamma rays using NaI detectors. Alpha spectroscopy of the ejected actinide material is performed in a custom-built ionization chamber to determine the amount of sputtered material. Actinide samples with various sample properties and surface conditions are irradiated and analyzed. In this presentation, we will discuss our experimental setup and present the preliminary results.

Electrochemical reduction of CerMet fuels for transmutation using surrogate CeO2-Mo pellets

NASA Astrophysics Data System (ADS)

Claux, B.; Souček, P.; Malmbeck, R.; Rodrigues, A.; Glatz, J.-P.

2017-08-01

One of the concepts chosen for the transmutation of minor actinides in Accelerator Driven Systems or fast reactors proposes the use of fuels and targets containing minor actinides oxides embedded in an inert matrix either composed of molybdenum metal (CerMet fuel) or of ceramic magnesium oxide (CerCer fuel). Since the sufficient transmutation cannot be achieved in a single step, it requires multi-recycling of the fuel including recovery of the not transmuted minor actinides. In the present work, a pyrochemical process for treatment of Mo metal inert matrix based CerMet fuels is studied, particularly the electroreduction in molten chloride salt as a head-end step required prior the main separation process. At the initial stage, different inactive pellets simulating the fuel containing CeO2 as minor actinide surrogates were examined. The main studied parameters of the process efficiency were the porosity and composition of the pellets and the process parameters as current density and passed charge. The results indicated the feasibility of the process, gave insight into its limiting parameters and defined the parameters for the future experiment on minor actinide containing material.

Local Symmetry Effects in Actinide 4f X-ray Absorption in Oxides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butorin, Sergei M.; Modin, Anders; Vegelius, Johan R.

2016-03-23

A systematic X-ray absorption study at actinide N 6,7 (4f → 6d transitions) edges was performed for light-actinide oxides including data obtained for the first time for NpO 2, PuO 2, and UO 3. The measurements were supported by ab initio calculations based on local-density-approximation with added 5f-5f Coulomb interaction (LDA+U). Improved energy resolution compared to common experiments at actinide L 2,3 (2p → 6d transitions) edges allowed us to resolve the major structures of the unoccupied 6d density of states (DOS) and estimate the crystal-field splittings in the 6d shell directly from the spectra of light-actinide dioxides. The measurementsmore » demonstrated an enhanced sensitivity of the N 6,7 spectral shape to changes in the compound crystal structure. Finally, for nonstoichiometric NpO 2-x, the filling of the entire band gap with Np 6d states was observed thus supporting a phase coexistence of Np metal and stoichiometric NpO 2 which is in agreement with the tentative Np-O phase diagram.« less

The CCONE Code System and its Application to Nuclear Data Evaluation for Fission and Other Reactions

NASA Astrophysics Data System (ADS)

Iwamoto, O.; Iwamoto, N.; Kunieda, S.; Minato, F.; Shibata, K.

2016-01-01

A computer code system, CCONE, was developed for nuclear data evaluation within the JENDL project. The CCONE code system integrates various nuclear reaction models needed to describe nucleon, light charged nuclei up to alpha-particle and photon induced reactions. The code is written in the C++ programming language using an object-oriented technology. At first, it was applied to neutron-induced reaction data on actinides, which were compiled into JENDL Actinide File 2008 and JENDL-4.0. It has been extensively used in various nuclear data evaluations for both actinide and non-actinide nuclei. The CCONE code has been upgraded to nuclear data evaluation at higher incident energies for neutron-, proton-, and photon-induced reactions. It was also used for estimating β-delayed neutron emission. This paper describes the CCONE code system indicating the concept and design of coding and inputs. Details of the formulation for modelings of the direct, pre-equilibrium and compound reactions are presented. Applications to the nuclear data evaluations such as neutron-induced reactions on actinides and medium-heavy nuclei, high-energy nucleon-induced reactions, photonuclear reaction and β-delayed neutron emission are mentioned.

Fuel Sustainability And Actinide Production Of Doping Minor Actinide In Water-Cooled Thorium Reactor

NASA Astrophysics Data System (ADS)

Permana, Sidik

2017-07-01

Fuel sustainability of nuclear energy is coming from an optimum fuel utilization of the reactor and fuel breeding program. Fuel cycle option becomes more important for fuel cycle utilization as well as fuel sustainability capability of the reactor. One of the important issues for recycle fuel option is nuclear proliferation resistance issue due to production plutonium. To reduce the proliferation resistance level, some barriers were used such as matrial barrier of nuclear fuel based on isotopic composition of even mass number of plutonium isotope. Analysis on nuclear fuel sustainability and actinide production composition based on water-cooled thorium reactor system has been done and all actinide composition are recycled into the reactor as a basic fuel cycle scheme. Some important parameters are evaluated such as doping composition of minor actinide (MA) and volume ratio of moderator to fuel (MFR). Some feasible parameters of breeding gains have been obtained by additional MA doping and some less moderation to fuel ratios (MFR). The system shows that plutonium and MA are obtained low compositions and it obtains some higher productions of even mass plutonium, which is mainly Pu-238 composition, as a control material to protect plutonium to be used as explosive devices.

Distinguished Lecture Series - Balancing the Energy & Climate Budget

ScienceCinema

None

2017-12-09

The average American uses 11400 Watts of power continuously. This is the equivalent of burning 114 x100 Watt light bulbs, all the time. The average person globally uses 2255 Watts of power, or a little less than 23 x100 Watt light bulbs.

Joint Actinide Shock Physics Experimental Research - JASPER

ScienceCinema

None

2018-01-16

Commonly known as JASPER the Joint Actinide Shock Physics Experimental Research facility is a two stage light gas gun used to study the behavior of plutonium and other materials under high pressures, temperatures, and strain rates.

Systematization of actinides using cluster analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopyrin, A.A.; Terent`eva, T.N.; Khramov, N.N.

1994-11-01

A representation of the actinides in multidimensional property space is proposed for systematization of these elements using cluster analysis. Literature data for their atomic properties are used. Owing to the wide variation of published ionization potentials, medians are used to estimate them. Vertical dendograms are used for classification on the basis of distances between the actinides in atomic-property space. The properties of actinium and lawrencium are furthest removed from the main group. Thorium and mendelevium exhibit individualized properties. A cluster based on the einsteinium-fermium pair is joined by californium.

Rapid method to determine actinides and 89/90Sr in limestone and marble samples

DOE PAGES

Maxwell, Sherrod L.; Culligan, Brian; Hutchison, Jay B.; ...

2016-04-12

A new method for the determination of actinides and radiostrontium in limestone and marble samples has been developed that utilizes a rapid sodium hydroxide fusion to digest the sample. Following rapid pre-concentration steps to remove sample matrix interferences, the actinides and 89/90Sr are separated using extraction chromatographic resins and measured radiometrically. The advantages of sodium hydroxide fusion versus other fusion techniques will be discussed. Lastly, this approach has a sample preparation time for limestone and marble samples of <4 hours.

"It Happened in Seconds" Firefighter Burn Prevention Program: Evaluation of a "Train the Trainer" Course.

PubMed

Kahn, Steven A; Held, Jenny M; Hollowed, Kathleen A; Woods, Jason; Holmes, James H

2016-01-01

Each year, there are approximately 100 firefighter fatalities and tens of thousands of injuries in the United States. 'It Happened in Seconds' is a firefighter burn injury awareness program offered to firefighters nationwide. The course focuses on situational awareness, personal protective equipment, and burn injury prevention. In order to create more instructors, a 'Train the Trainer' instructor course was developed to prepare experienced firefighters and healthcare providers from around the United States to teach firefighters in their respective communities. This study evaluates trainees' perception of the instructor course. Three instructor courses were held in a period between November 2013 and January 2015. Trainees were asked to complete both precourse/postcourse assessments and provide demographics. In both surveys, trainees rated their confidence to instruct firefighters about burn prevention and their awareness about firefighter-specific burn issues using a 5-point Likert Scale (1 = none and 5 = high). The postassessment asked if trainees thought the course should be mandatory for all firefighters. Pretest and post-test scores were compared using a Wilcoxon's signed-rank test. A total of 140 experienced firefighters and healthcare professionals completed the Train the Trainer course. The average age was 40 ± 9 years, and 41 were women and 99 men. The average trainee had 13.6 ± 9 years experience in his or her respective job and 11 ± 9 years experience in burn care. Trainees reported a significant increase in their confidence to instruct firefighters about burn prevention (2.9/5 precourse vs. 4.5/5 postcourse, P < .0001) and in their current awareness of firefighter-specific burn issues (3.2 precourse vs. 4.4 postcourse, P < .0001). In the postcourse assessment, 139 of 140 respondents agreed that the 'It Happened in Seconds' course should be mandatory for all firefighters. This study showed that experienced firefighters and healthcare professionals thought that the course significantly improved their awareness level of issues specific to firefighter burn injury as well as their confidence in teaching these concepts to firefighters. Based on this positive evaluation, additional instructors will be trained to provide the course to all firefighters nationwide. Additional research must be conducted to evaluate whether the 'It Happened in Seconds' course results in a decreased rate of firefighter burn injuries.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Asok K. Ray

2012-05-22

During the past decades, considerable theoretical efforts have been devoted to studying the electronic and geometric structures and related properties of surfaces. Such efforts are particularly important for systems like the actinides for which experimental work is relatively difficult to perform due to material problems and toxicity. The actinides are characterized by a gradual filling of the 5f-electron shell with the degree of localization increasing with the atomic number Z along the last series of the periodic table. The open shell of the 5f electrons determines the atomic, molecular, and solid state properties of the actinide elements and their compoundsmore » and understanding the quantum mechanics of the 5f electrons is the defining issue in the chemistry and physics of actinide elements. These elements are also characterized by the increasing prominence of relativistic effects and their studies can, in fact, help us understand the role of relativity throughout the periodic table. However, the electronic and geometric structures of the actinides, specifically the trans-uranium actinides and the roles of the 5f electrons in chemical bonding are still not well understood. This is crucial not only for our understanding of the actinides but also for the fact that the actinides constitute 'the missing link' between the d transition elements and the lanthanides. The 5f orbitals have properties intermediate between those of localized 4f and delocalized 3d orbitals. Thus, a proper understanding of the actinides will help us understand the behavior of the lanthanides and transition metals as well. In fact, there is an urgent need for continued extensive and detailed theoretical research in this area to provide significant and deep understandings of the electronic and geometric structures of the actinides. In this work, we have performed electronic structure studies for plutonium (Pu), americium (Am), and curium (Cm) surfaces, and molecular adsorptions on Pu and Am surfaces. In particular, the region at the boundary of Pu and Am, is widely believed to be the crossover region between d-like itinerant and f-like localized behavior The eventual goal is a complete understanding of the surface chemistry and physics processes of all actinide surfaces, defining the chemistry and physics of such heavy elements. Among the actinides, plutonium, with five 5f electrons in the solid state, is arguably the most complex, fascinating, and enigmatic element known to mankind and has attracted extraordinary scientific and technological interests because of its unique properties, generating a significant body of research in diverse areas, including superconductivity. Pu has, at least, six stable allotropes between room temperature and melting at atmospheric pressure, indicating that the valence electrons can hybridize into a number of complex bonding arrangements. Central and critical questions relate to the electronic structure, localization of the 5f electrons and the magnetism of Pu. For the light-actinides, from Th to Pu, the 5f electrons are believed to be delocalized, hybridizing with the 6d and 7s electrons. For the heavier actinides, Am and beyond, the 5f electrons are localized with the 5f orbitals progressively lower in energy relative to the 6d configuration. Hence, Pu is in a position where the 5f electronic behavior changes from itinerant to localized. As far as magnetism is concerned, a majority of the theoretical calculations continues to claim the existence of magnetism while almost all the experimental results do not find any support for such claims. The second element of interest to us, namely americium, occupies a central position in the actinide series with respect to the involvement of 5f electrons in metallic bonding. It is widely believed that the 5f electrons in Am are localized and that Am undergoes a series of crystallographic phase changes with pressure. Fully-relativistic all electron surface studies of the different phases of Am, initially for the dhcp and the fcc surfaces, can and have provided us with valuable information about chemical bonding in Am and the transitions from f-electron delocalization to f-electron localization in trans-uranium compounds. In particular, a comparative study of the electronic structures of the Pu and Am surfaces using the techniques of all-electron modern density functional theory and beyond can provide significant information about the role of 5f electrons in bond formation as also the localization of the 5f electrons, matters of considerable controversies. The change from metallic 5f bonding into local-moment nonbonding configurations that takes place between Pu and Am is rather unique in the periodic table and is at the very heart of our understanding of electronic structure. We believe that, considering the narrow bandwidth of surface states, any transition from itinerant to localized behavior first takes place at the actinide surfaces with possible reconstructions.« less

Potentiometric Sensor for Real-Time Remote Surveillance of Actinides in Molten Salts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Natalie J. Gese; Jan-Fong Jue; Brenda E. Serrano

2012-07-01

A potentiometric sensor is being developed at the Idaho National Laboratory for real-time remote surveillance of actinides during electrorefining of spent nuclear fuel. During electrorefining, fuel in metallic form is oxidized at the anode while refined uranium metal is reduced at the cathode in a high temperature electrochemical cell containing LiCl-KCl-UCl3 electrolyte. Actinides present in the fuel chemically react with UCl3 and form stable metal chlorides that accumulate in the electrolyte. This sensor will be used for process control and safeguarding of activities in the electrorefiner by monitoring the concentrations of actinides in the electrolyte. The work presented focuses onmore » developing a solid-state cation conducting ceramic sensor for detecting varying concentrations of trivalent actinide metal cations in eutectic LiCl-KCl molten salt. To understand the basic mechanisms for actinide sensor applications in molten salts, gadolinium was used as a surrogate for actinides. The ß?-Al2O3 was selected as the solid-state electrolyte for sensor fabrication based on cationic conductivity and other factors. In the present work Gd3+-ß?-Al2O3 was prepared by ion exchange reactions between trivalent Gd3+ from GdCl3 and K+-, Na+-, and Sr2+-ß?-Al2O3 precursors. Scanning electron microscopy (SEM) was used for characterization of Gd3+-ß?-Al2O3 samples. Microfocus X-ray Diffraction (µ-XRD) was used in conjunction with SEM energy dispersive X-ray spectroscopy (EDS) to identify phase content and elemental composition. The Gd3+-ß?-Al2O3 materials were tested for mechanical and chemical stability by exposing them to molten LiCl-KCl based salts. The effect of annealing on the exchanged material was studied to determine improvements in material integrity post ion exchange. The stability of the ß?-Al2O3 phase after annealing was verified by µ-XRD. Preliminary sensor tests with different assembly designs will also be presented.« less

Contribution of solid fuel, gas combustion or tobacco smoke to indoor air pollutant concentrations in Irish and Scottish homes

PubMed Central

Semple, S; Garden, C; Coggins, M; Galea, KS; Whelan, P; Cowie, H; Sánchez-Jimenéz, A; Thorne, PS; Hurley, JF; Ayres, JG

2012-01-01

There are limited data describing pollutant levels inside homes that burn solid fuel within developed country settings with most studies describing test conditions or the effect of interventions. This study recruited homes in Ireland and Scotland where open combustion processes take place. Open combustion was classified as coal, peat or wood fuel burning, use of a gas cooker or stove, or where there is at least one resident smoker. 24-hour data on airborne concentrations of particulate matter less than 2.5 microns in size (PM2.5), carbon monoxide (CO), endotoxin in inhalable dust and carbon dioxide (CO2), together with 2–3 week averaged concentrations of nitrogen dioxide (NO2) were collected in 100 houses during the winter and spring of 2009–2010. The geometric mean of the 24-hour time-weighted-average (TWA) PM2.5 concentration was highest in homes with resident smokers (99μg/m3 – much higher than the WHO 24-hour guidance value of 25 μg/m3. Lower geometric mean 24-hour TWA levels were found in homes that burned coal (7 μg/m3) or wood (6 μg/m3) and in homes with gas cookers (7 μg/m3). In peat-burning homes the average 24-hourPM2.5 level recorded was 11 μg/m3. Airborne endotoxin, CO, CO2 and NO2 concentrations were generally within indoor air quality guidance levels. PMID:22007695

Emergence of californium as the second transitional element in the actinide series

PubMed Central

Cary, Samantha K.; Vasiliu, Monica; Baumbach, Ryan E.; Stritzinger, Jared T.; Green, Thomas D.; Diefenbach, Kariem; Cross, Justin N.; Knappenberger, Kenneth L.; Liu, Guokui; Silver, Mark A.; DePrince, A. Eugene; Polinski, Matthew J.; Van Cleve, Shelley M.; House, Jane H.; Kikugawa, Naoki; Gallagher, Andrew; Arico, Alexandra A.; Dixon, David A.; Albrecht-Schmitt, Thomas E.

2015-01-01

A break in periodicity occurs in the actinide series between plutonium and americium as the result of the localization of 5f electrons. The subsequent chemistry of later actinides is thought to closely parallel lanthanides in that bonding is expected to be ionic and complexation should not substantially alter the electronic structure of the metal ions. Here we demonstrate that ligation of californium(III) by a pyridine derivative results in significant deviations in the properties of the resultant complex with respect to that predicted for the free ion. We expand on this by characterizing the americium and curium analogues for comparison, and show that these pronounced effects result from a second transition in periodicity in the actinide series that occurs, in part, because of the stabilization of the divalent oxidation state. The metastability of californium(II) is responsible for many of the unusual properties of californium including the green photoluminescence. PMID:25880116

Advancing the scientific basis of trivalent actinide-lanthanide separations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, K.L.

For advanced fuel cycles designed to support transmutation of transplutonium actinides, several options have been demonstrated for process-scale aqueous separations for U, Np, Pu management and for partitioning of trivalent actinides and fission product lanthanides away from other fission products. The more difficult mutual separation of Am/Cm from La-Tb remains the subject of considerable fundamental and applied research. The chemical separations literature teaches that the most productive alternatives to pursue are those based on ligand donor atoms less electronegative than O, specifically N- and S-containing complexants and chloride ion (Cl{sup -}). These 'soft-donor' atoms have exhibited usable selectivity in theirmore » bonding interactions with trivalent actinides relative to lanthanides. In this report, selected features of soft donor reagent design, characterization and application development will be discussed. The roles of thiocyanate, aminopoly-carboxylic acids and lactate in separation processes are detailed. (authors)« less

Biogeochemical patterns of intermittent streams over space and time as surface flows decrease

NASA Astrophysics Data System (ADS)

MacNeille, R. B.; Lohse, K. A.; Godsey, S.; McCorkle, E. P.; Parsons, S.; Baxter, C.

2016-12-01

Climate change in the western United States is projected to lead to earlier snowmelt, increasing fire risk and potentially transitioning perennial streams to intermittent ones. Differences between perennial and intermittent streams, especially the temporal and spatial patterns of carbon and nutrient dynamics during periods of drying, are understudied. We examined spatial and temporal patterns in surface water biogeochemistry in southwest Idaho and hypothesized that as streams dry, carbon concentrations would increase due to evapoconcentration and/or increased in-stream production. Furthermore, we expected that biogeochemical patterns of streams would become increasingly spatially heterogeneous with drying. Finally, we expected that these patterns would vary in response to fire. To test these hypotheses, we collected water samples every 50 meters from two intermittent streams, one burned and one unburned, in April, May and June, 2016 to determine surface water biogeochemistry. Results showed average concentrations of dissolved inorganic carbon (DIC) and dissolved organic carbon (DOC) increased 3-fold from April to June in the burned site compared to the unburned site where concentrations remained relatively constant. Interestingly, average concentrations of total nitrogen (TN) dropped substantially for the burned site over these three months, but only decreased slightly for the unburned site over the same time period. We also assessed changes in spatial correlation between the burned and unburned site: carbon concentrations were less spatially correlated at the unburned site than at the burned site. Scatterplot matrices of DIC values indicated that at a lag distance of 300 m in April and June, the unburned site had r-values of 0.7416 and 0.5975, respectively, while the burned site had r-values of 0.9468 and 0.8783, respectively. These initial findings support our hypotheses that carbon concentrations and spatial heterogeneity increased over time.

Influence of fire on black-tailed prairie dog colony expansion in shortgrass steppe

USGS Publications Warehouse

Augustine, D.J.; Cully, J.F.; Johnson, T.L.

2007-01-01

Factors influencing the distribution and abundance of black-tailed prairie dog (Cynomys ludovicianus) colonies are of interest to rangeland managers because of the significant influence prairie dogs can exert on both livestock and biodiversity. We examined the influence of 4 prescribed burns and one wildfire on the rate and direction of prairie dog colony expansion in shortgrass steppe of southeastern Colorado. Our study was conducted during 2 years with below-average precipitation, when prairie dog colonies were expanding throughout the study area. Under these dry conditions, the rate of black-tailed prairie dog colony expansion into burned grassland (X?? = 2.6 ha??100-m perimeter-1??y-1; range = 0.8-5.9 ha??100-m perimeter-1??y-1; N = 5 colonies) was marginally greater than the expansion rate into unburned grassland (X?? =1.3 ha??100-m perimeter-1??y-1; range = 0.2-4.9 ha??100-m perimeter-1??y-1; N = 23 colonies; P = 0.066). For 3 colonies that were burned on only a portion of their perimeter, we documented consistently high rates of expansion into the adjacent burned grassland (38%-42% of available burned habitat colonized) but variable expansion rates into the adjacent unburned grassland (2%-39% of available unburned habitat colonized). While our results provide evidence that burning can increase colony expansion rate even under conditions of low vegetative structure, this effect was minor at the scale of the overall colony complex because some unburned colonies were also able to expand at high rates. This result highlights the need to evaluate effects of fire on colony expansion during above-average rainfall years, when expansion into unburned grassland may be considerably lower.

Semi-arid grassland bird responses to patch-burn grazing and drought

USGS Publications Warehouse

Skagen, Susan K.; Augustine, David J.; Derner, Justin D.

2018-01-01

As grassland birds of central North America experience steep population declines with changes in land use, management of remaining tracts becomes increasingly important for population viability. The integrated use of fire and grazing may enhance vegetation heterogeneity and diversity in breeding birds, but the subsequent effects on reproduction are unknown. We examined the influence of patch-burn grazing management in shortgrass steppe in eastern Colorado on habitat use and reproductive success of 3 grassland bird species, horned lark (Eremophila alpestris), lark bunting (Calamospiza melanocorys), and McCown’s longspur (Rhynchophanes mccownii), at several spatial scales during 2011 and 2012. Although no simple direct relationship to patch-burn grazing treatment existed, habitat selection depended on precipitation- and management-induced vegetation conditions and spatial scale. All species selected taller-than-expected vegetation at the nest site, whereas at the territory scale, horned larks and McCown’s longspurs selected areas with low vegetation height and sparse cover of tall plants (taller than the dominant shortgrasses). Buntings nested primarily in unburned grassland under average rainfall. Larks and longspurs shifted activity from patch burns during average precipitation (2011) to unburned pastures during drought (2012). Daily survival rate (DSR) of nests varied with time in season, species, weather, and vegetation structure. Daily survival rate of McCown’s longspur nests did not vary with foliar cover of relatively tall vegetation at the nest under average precipitation but declined with increasing cover during drought. At the 200-m scale, increasing cover of shortgrasses, rather than taller plant species, improved DSR of larks and longspurs. These birds experience tradeoffs in the selection of habitat at different spatial scales: tall structure at nests may reduce visual detection by predators and provide protection from sun, wind, and rain, yet taller structure surrounding territories may host nest predators. Patch-burn grazing management in combination with other strategies that retain taller-structured vegetation may help sustain a diversity of breeding habitats for shortgrass birds under varying weather conditions.

Simulation of mixing in the quick quench region of a rich burn-quick quench mix-lean burn combustor

NASA Technical Reports Server (NTRS)

Shih, Tom I.-P.; Nguyen, H. Lee; Howe, Gregory W.; Li, Z.

1991-01-01

A computer program was developed to study the mixing process in the quick quench region of a rich burn-quick quench mix-lean burn combustor. The computer program developed was based on the density-weighted, ensemble-averaged conservation equations of mass, momentum (full compressible Navier-Stokes), total energy, and species, closed by a k-epsilon turbulence model with wall functions. The combustion process was modeled by a two-step global reaction mechanism, and NO(x) formation was modeled by the Zeldovich mechanism. The formulation employed in the computer program and the essence of the numerical method of solution are described. Some results obtained for nonreacting and reacting flows with different main-flow to dilution-jet momentum flux ratios are also presented.

Evaluation of the 235 U resonance parameters to fit the standard recommended values

DOE PAGES

Leal, Luiz; Noguere, Gilles; Paradela, Carlos; ...

2017-09-13

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. We performed a resonance re-evaluation of the n + 235U interactionmore » in order to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-o-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. Our paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.« less

Evaluation of the 235 U resonance parameters to fit the standard recommended values

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leal, Luiz; Noguere, Gilles; Paradela, Carlos

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. We performed a resonance re-evaluation of the n + 235U interactionmore » in order to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-o-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. Our paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.« less

Evaluation of the 235U resonance parameters to fit the standard recommended values

NASA Astrophysics Data System (ADS)

Leal, Luiz; Noguere, Gilles; Paradela, Carlos; Durán, Ignacio; Tassan-Got, Laurent; Danon, Yaron; Jandel, Marian

2017-09-01

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235U interaction the only value in agreement with the standard is the thermal fission cross section. A resonance re-evaluation of the n + 235U interaction has been performed to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235U fission cross-section measurements have been performed at the CERN Neutron Time-of-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. This paper presents the procedure used for re-evaluating the 235U resonance parameters including the recommended standard values as well as new cross section measurements.

Sigma Team for Advanced Actinide Recycle FY2015 Accomplishments and Directions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moyer, Bruce A.

The Sigma Team for Minor Actinide Recycle (STAAR) has made notable progress in FY 2015 toward the overarching goal to develop more efficient separation methods for actinides in support of the United States Department of Energy (USDOE) objective of sustainable fuel cycles. Research in STAAR has been emphasizing the separation of americium and other minor actinides (MAs) to enable closed nuclear fuel recycle options, mainly within the paradigm of aqueous reprocessing of used oxide nuclear fuel dissolved in nitric acid. Its major scientific challenge concerns achieving selectivity for trivalent actinides vs lanthanides. Not only is this challenge yielding to researchmore » advances, but technology concepts such as ALSEP (Actinide Lanthanide Separation) are maturing toward demonstration readiness. Efforts are organized in five task areas: 1) combining bifunctional neutral extractants with an acidic extractant to form a single process solvent, developing a process flowsheet, and demonstrating it at bench scale; 2) oxidation of Am(III) to Am(VI) and subsequent separation with other multivalent actinides; 3) developing an effective soft-donor solvent system for An(III) selective extraction using mixed N,O-donor or all-N donor extractants such as triazinyl pyridine compounds; 4) testing of inorganic and hybrid-type ion exchange materials for MA separations; and 5) computer-aided molecular design to identify altogether new extractants and complexants and theory-based experimental data interpretation. Within these tasks, two strategies are employed, one involving oxidation of americium to its pentavalent or hexavalent state and one that seeks to selectively complex trivalent americium either in the aqueous phase or the solvent phase. Solvent extraction represents the primary separation method employed, though ion exchange and crystallization play an important role. Highlights of accomplishments include: Confirmation of the first-ever electrolytic oxidation of Am(III) in a noncomplexing aqueous solution and submission of this scientific breakthrough as a paper in Science; The first-ever co-crystallization of Am(VI) with UO 2(NO 3) 2 ∙ 6H 2O, opening the door to a new approach for separating hexavalent actinides as a group; Results showing that three potentially problematic metals will not present risk in ALSEP; Improvement in ALSEP contactor stripping kinetics to acceptable performance; A comparison of centrifugal contactors vs mixer-settlers showing the former performs better in ALSEP stripping; Synthesis of new mixed N,O-donor extractants with enhanced solubility and strength for selective trivalent actinide extraction; Development of computational methods showing promise in prediction of the selectivity of new extractants for trivalent actinides vs lanthanides; An order-of-magnitude improvement in aqueous Am/Eu complexation selectivity of an alternative macrocyclic stripping agent for ALSEP, potentially enabling an option for an Am product stream free from both Ln and Cm. An alternative aqueous combination of dipicolinate complexant and malonate buffer that may present options for ALSEP and TALSPEAK (Trivalent Actinide-Lanthanide Separations by Phosphorus-reagent Extraction from Aqueous Komplexes) type separations. The ALSEP concept is advancing toward a benchtop flowsheet demonstration planned for FY 2016, and a bench-scale test bed at Idaho National Laboratory (INL) will be employed to demonstrate at least one tandem Am oxidation and separation concept. This report outlines the goals of the STAAR, significance of achieving these goals, STAAR organization around the above aims and questions, recent highlights, and future directions. The report also includes a listing of publications, reports, patents, and dissertations.« less

An optimization methodology for heterogeneous minor actinides transmutation

NASA Astrophysics Data System (ADS)

Kooyman, Timothée; Buiron, Laurent; Rimpault, Gérald

2018-04-01

In the case of a closed fuel cycle, minor actinides transmutation can lead to a strong reduction in spent fuel radiotoxicity and decay heat. In the heterogeneous approach, minor actinides are loaded in dedicated targets located at the core periphery so that long-lived minor actinides undergo fission and are turned in shorter-lived fission products. However, such targets require a specific design process due to high helium production in the fuel, high flux gradient at the core periphery and low power production. Additionally, the targets are generally manufactured with a high content in minor actinides in order to compensate for the low flux level at the core periphery. This leads to negative impacts on the fuel cycle in terms of neutron source and decay heat of the irradiated targets, which penalize their handling and reprocessing. In this paper, a simplified methodology for the design of targets is coupled with a method for the optimization of transmutation which takes into account both transmutation performances and fuel cycle impacts. The uncertainties and performances of this methodology are evaluated and shown to be sufficient to carry out scoping studies. An illustration is then made by considering the use of moderating material in the targets, which has a positive impact on the minor actinides consumption but a negative impact both on fuel cycle constraints (higher decay heat and neutron) and on assembly design (higher helium production and lower fuel volume fraction). It is shown that the use of moderating material is an optimal solution of the transmutation problem with regards to consumption and fuel cycle impacts, even when taking geometrical design considerations into account.

Forest Understory Fire in the Brazilian Amazon in ENSO and Non-ENSO Years: Area Burned and Committed Carbon Emissions

NASA Technical Reports Server (NTRS)

Alencar, A.; Nepstad, D.; Ver-Diaz, M. Del. C.

2004-01-01

"Understory fires" that burn the floor of standing forests are one of the most important types of forest impoverishment in the Amazon, especially during the severe droughts of El Nino Southern Oscillation (ENSO) episodes. However, we are aware of no estimates of the areal extent of these fires for the Brazilian Amazon and, hence, of their contribution to Amazon carbon fluxes to the atmosphere. We calculated the area of forest understory fires for the Brazilian Amazon region during an El Nino (1998) and a non El Nino (1995) year based on forest fire scars mapped with satellite images for three locations in eastern and southern Amazon, where deforestation is concentrated. The three study sites represented a gradient of both forest types and dry season severity. The burning scar maps were used to determine how the percentage of forest that burned varied with distance from agricultural clearings. These spatial functions were then applied to similar forest/climate combinations outside of the study sites to derive an initial estimate for the Brazilian Amazon. Ninety-one percent of the forest area that burned in the study sites was within the first kilometer of a clearing for the non ENSO year and within the first four kilometers for the ENSO year. The area of forest burned by understory forest fire during the severe drought (ENSO) year (3.9 millions of hectares) was 13 times greater than the area burned during the average rainfall year (0.2 million hectares), and twice the area of annual deforestation rate. Dense forest was, proportionally, the forest area most affected by understory fires during the El Nino year, while understory fires were concentrated in transitional forests during the year of average rainfall. Our estimate of aboveground tree biomass killed by fire ranged from 0.06 Pg to 0.38 Pg during the ENSO and from 0,004 Pg to 0,024 Pg during the non ENSO.

Assistant for Specifying Quality Software (ASQS) Mission Area Analysis

DTIC Science & Technology

1990-12-01

somewhat arbitrary, it was a reasonable and fast approach for partitioning the mission and software domains. The MAD builds on work done by Boeing Aerospace...Reliability ++ Reliability +++ Response 2: NO Discussion: A NO response implies intermittent burns -- most likely to perform attitude control functions...Propulsion Reliability +++ Reliability ++ 4-15 4.8.3 Query BT.3 Query: For intermittent thruster firing requirements, will the average burn time be less than

Care for the Critically Injured Burn Patient Modulation of Burn Scars Through Laser Deliver of Stem Cells

DTIC Science & Technology

2013-10-01

average 1 hour per response , including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed...dermal remodeling 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF RESPONSIBLE PERSON USAMRMC a...evaluations made prior to each biopsy. The initial grading system took into account vascularity , pliability, color, contour, texture, and

Measurements and source apportionment of particle-associated polycyclic aromatic hydrocarbons in ambient air in Riyadh, Saudi Arabia

NASA Astrophysics Data System (ADS)

Bian, Qijing; Alharbi, Badr; Collett, Jeffrey; Kreidenweis, Sonia; Pasha, Mohammad J.

2016-07-01

Ambient air samples were obtained in Riyadh, the capital and largest city of Saudi Arabia, during two measurement campaigns spanning September 2011 to September 2012. Sixteen particle-phase polycyclic aromatic hydrocarbons (PAH) were quantified in 167 samples. Pyrene and fluoranthene were the most abundant PAH, with average of 3.37 ± 14.01 ng m-3 and 8.00 ± 44.09 ng m-3, respectively. A dominant contribution from low molecular weight (LMW) PAH (MW < 228) suggested a large influence of industrial emissions on PAH concentrations. Monte Carlo source apportionment using diagnostic ratios showed that 80 ± 10% of the average LMW PAH concentrations were contributed by petroleum vapor emissions, while 53 ± 19% of high molecular weight (HMW) PAH were from solid fuel combustion emissions. The positive matrix factorization model estimated that oil combustion emissions dominated total PAH concentrations, accounting for on average 96%, likely due to widespread use of oil fuels in energy production (power plants and industries). Our results demonstrate the significant influence of petroleum product production and consumption on particulate-phase PAH concentrations in Riyadh, but also point to the importance of traffic and solid fuel burning, including coke burning and seasonal biomass burning, especially as they contribute to the ambient levels of HMW PAH.

Topical effectiveness of kiwifruit versus fibrinolysin ointment on removal of necrotic tissue of full-thickness burns in male rats.

PubMed

Kooshiar, Hadi; Abbaspour, Hadi; Motamed Al Shariati, Seyed Mohamad; Rakhshandeh, Hasan; Khajavi Rad, Abolfazl; Esmaily, Habibollah; Vahdati Nia, Behnam

2012-01-01

Formation of necrotic tissues is a major issue affecting treatment of full-thickness burns. This study was designed to compare topical effectiveness of applying kiwifruit versus fibrinolysin on removal of necrotic tissue of burns. Ten adult male Wistar rats were randomly assigned to three groups. For group 1, the right-side wounds were treated with kiwifruit and the other side with fibrinolysin. For group 2, the wounds on the right side were treated with kiwifruit or fibrinolysin, and the left sides were kept as control group 2. All wounds in group 3 were considered as control group 1. The control wounds were left to heal naturally. In each group and for each wound, the time of debridement were noted. The results indicated that for the wounds where kiwifruit was applied, the average time for removal of dead tissue was 5.7 days, which is significantly shorter than the average 18.5 days it took for treatment with fibrinolysin (p = 0.02). However, there were no significant differences between control wounds 1 and 2. Findings of the present study can open new horizons and provide a new treatment modality for patients with deep burns. © 2012 Wiley Periodicals, Inc.

Emissions of Glyoxal and Other Carbonyl Compounds from Agricultural Biomass Burning Plumes Sampled by Aircraft.

PubMed

Zarzana, Kyle J; Min, Kyung-Eun; Washenfelder, Rebecca A; Kaiser, Jennifer; Krawiec-Thayer, Mitchell; Peischl, Jeff; Neuman, J Andrew; Nowak, John B; Wagner, Nicholas L; Dubè, William P; St Clair, Jason M; Wolfe, Glenn M; Hanisco, Thomas F; Keutsch, Frank N; Ryerson, Thomas B; Brown, Steven S

2017-10-17

We report enhancements of glyoxal and methylglyoxal relative to carbon monoxide and formaldehyde in agricultural biomass burning plumes intercepted by the NOAA WP-3D aircraft during the 2013 Southeast Nexus and 2015 Shale Oil and Natural Gas Nexus campaigns. Glyoxal and methylglyoxal were measured using broadband cavity enhanced spectroscopy, which for glyoxal provides a highly selective and sensitive measurement. While enhancement ratios of other species such as methane and formaldehyde were consistent with previous measurements, glyoxal enhancements relative to carbon monoxide averaged 0.0016 ± 0.0009, a factor of 4 lower than values used in global models. Glyoxal enhancements relative to formaldehyde were 30 times lower than previously reported, averaging 0.038 ± 0.02. Several glyoxal loss processes such as photolysis, reactions with hydroxyl radicals, and aerosol uptake were found to be insufficient to explain the lower measured values of glyoxal relative to other biomass burning trace gases, indicating that glyoxal emissions from agricultural biomass burning may be significantly overestimated. Methylglyoxal enhancements were three to six times higher than reported in other recent studies, but spectral interferences from other substituted dicarbyonyls introduce an estimated correction factor of 2 and at least a 25% uncertainty, such that accurate measurements of the enhancements are difficult.

Analyses of biomass burning contribution to aerosol in Zhengzhou during wheat harvest season in 2015

NASA Astrophysics Data System (ADS)

Chen, Hongyang; Yin, Shasha; Li, Xiao; Wang, Jia; Zhang, Ruiqin

2018-07-01

Ambient PM2.5 samples were collected in suburban area of Zhengzhou, China to investigate the impact of straw open burning on local aerosol during wheat harvest season in 2015. Secondary formation and accumulation processes were found under unfavorable meteorological conditions through the chemical composition analysis in PM2.5. And spatial and temporal variation of the agricultural activities were observed through MODIS fire spots data combined with back trajectory analysis. Results showed elevated levoglucosan was affected directly during biomass burning episodes and transportation periods. In order to estimate the contribution, levoglucosan/K+ combined with levoglucosan/mannosan were analyzed to identify biomass burning sources. And the results showed that levoglucosan were emitted from straw burning mixing with softwood combustion during the study period, emphasizing that wood combustion for households was non-negligible which consists part of the levoglucosan background in Zhengzhou aerosol. Based on emission factors (levoglucosan/OC or levoglucosan/PM2.5) summarized by laboratory simulation experiments, the study period was divided into 7 depending on the former characteristics to estimate the contribution of biomass burning to aerosol, and the average contributions of biomass burning emission to OC and PM2.5 were 46% and 13% relatively, indicating biomass burning have a significant impact on ambient aerosol levels during harvest season.

Factors Influencing Resilience of Burn Patients in South Korea.

PubMed

Jang, Mi Heui; Park, Jongui; Chong, Mi Kyong; Sok, Sohyune R

2017-09-01

To examine and identify the factors influencing the degree of resilience among Korean burn patients. A cross-sectional descriptive design was employed. The study sample consisted of 138 burn patients recovering from the acute phase in H hospital, Seoul. The male patient participants numbered 93 (67.4%) and the female participants numbered 45 (32.6%). The average age of the participants was 46.79 years. Measures used were the Beck Depression Inventory, State Trait Anxiety Inventory, self-esteem scale, family support scale, and resilience scale. The analyses showed that the prediction model for resilience among burn patients was significant (F = 33.94, p < .001). The value of the adjusted R 2 was 0.492, which corresponds to the explanatory power of 49.2%. The factor that was found to have the most influence on resilience among burn patients was self-esteem (β = .35), followed by family support (β = .29). This study provides preliminary evidence that self-esteem is a major and primary predictor of resilience among burn patients, next followed by family support. In the nursing practice, nurses need to pay attention to the burn patient's self-esteem and family support. Concrete interventions and strategies to improve the resilience of burn patients are needed. © 2017 Sigma Theta Tau International.

Steam inhalation therapy: severe scalds as an adverse side effect

PubMed Central

Baartmans, Martin; Kerkhof, Evelien; Vloemans, Jos; Dokter, Jan; Nijman, Susanne; Tibboel, Dick; Nieuwenhuis, Marianne

2012-01-01

Background Steam inhalation therapy is often recommended in the treatment of a common cold. However, it has no proven benefit and may in fact have serious adverse side effects in terms of burn injuries. Aim To quantify the human and economic costs of steam inhalation therapy in terms of burn injury. Design and setting A prospective database study of all patients admitted to the burn centres (Beverwijk, Groningen, Rotterdam) and the hospital emergency departments in the Netherlands. Method Number and extent of burn injuries as a result of steam inhalation therapy were analysed, as well as an approximation made of the direct costs for their medical treatment. Results Annually, on average three people are admitted to in one of the Dutch burn centres for burns resulting from steam inhalation therapy. Most victims were children, and they needed skin grafting more often than adults. The total direct medical costs for burn centre and emergency department treatment were €115 500 (£93 000), emotional costs are not reflected. Conclusion As steam inhalation therapy has no proven benefit and the number and extent of complications of this therapy in terms of burn injury are significant, especially in children, steam inhalation therapy should be considered a dangerous procedure and not recommended anymore in professional guidelines and patient brochures. PMID:22781995

An Analysis Framework Using Satellite Remote Sensing to Understand Landscape Patterns of High Severity Burns from Wildfires in Coastal Woodlands of California and Italy

NASA Astrophysics Data System (ADS)

Potter, C. S.

2016-12-01

The central California coastal landscape has a history of frequent large wildfires that have threatened or destroyed many residential structures at the wildland interface. This study starts with the largest wildfires on the Central Coast over the past 30 years and analyzes the fraction and landscape patterns of high severity burned (HBS) areas from the Landsat-based Monitoring Trends in Burn Severity (MTBS) data base as a function of weather conditions and topographic variations. Results indicate that maximum temperatures at the time of fire and the previous 12 months of rainfall explained a significant portion of the variation in total area burned and the fraction of HBS area. Average patch size and aggregation metrics of HBS areas were included in the analysis framework. Within each burned area, the Landsat (30-meter resolution) differenced Normalized Burn Ratio (dNBR), a continuous index of vegetation burn severity, was correlated against slope, aspect, and elevation to better understand landscape level-controls over HBS patches. The Landsat dNBR analysis framework is being extended next to the island of Sardinia, Italy for a comparison of Mediterranean climates and wildfire patterns since the mid-1980s.

Split thickness skin graft meshing ratio indications and common practices.

PubMed

Pripotnev, Stahs; Papp, Anthony

2017-12-01

Split thickness skin grafting is a commonly used technique in burn surgery for resurfacing wounds that are unlikely to heal without scarring. Meshing and expanding skin grafts allow for reconstruction of larger wounds with smaller donor sites. A retrospective chart review was performed of 210 patients with burns equal to or greater than 20% total body surface area admitted to Vancouver General Hospital between 1998 and 2014. Charts were reviewed to collect data on patient and burn demographics. A survey was sent to Canadian plastic surgeons registered with the CSPS to collect data on common practices in burn surgery nationwide. The patients that received 3:1 or higher meshed grafts were all flame burns, had a significantly higher average TBSA (51.89%±14.87 vs 29.13%±9.48, p=0.001), and a significantly higher full thickness burn TBSA (25.76%±21.97 vs 6.20%±9.04, p=0.001). We found no significant differences in gender, age, or burn location between the less than 2:1 and 3:1 or greater meshing ratio groups. The survey of plastic surgeons performing burn surgery in Canada revealed that 60% of responders had experience with skin grafts using meshing ratios of 3:1 or higher. Of these surgeons, 100% felt that burn size and 36% felt that burn location would influence their decision to use a 3:1 or higher meshing ratio. A larger burn size is the major influencing factor for the use of higher skin graft meshing ratios by Canadian burn surgeons. Furthermore, burn location determines the choice of donor and recipient sites in these cases. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Development and evaluation of a novel smart device-based application for burn assessment and management.

PubMed

Godwin, Zachary; Tan, James; Bockhold, Jennifer; Ma, Jason; Tran, Nam K

2015-06-01

We have developed a novel software application that provides a simple and interactive Lund-Browder diagram for automatic calculation of total body surface area (TBSA) burned, fluid formula recommendations, and serial wound photography on a smart device platform. The software was developed for the iPad (Apple, Cupertino, CA) smart device platforms. Ten burns ranging from 5 to 95% TBSA were computer generated on a patient care simulator using Adobe Photoshop CS6 (Adobe, San Jose, CA). Burn clinicians calculated the TBSA first using a paper-based Lund-Browder diagram. Following a one-week "washout period", the same clinicians calculated TBSA using the smart device application. Simulated burns were presented in a random fashion and clinicians were timed. Percent TBSA burned calculated by Peregrine vs. the paper-based Lund-Browder were similar (29.53 [25.57] vs. 28.99 [25.01], p=0.22, n=7). On average, Peregrine allowed users to calculate burn size significantly faster than the paper form (58.18 [31.46] vs. 90.22 [60.60]s, p<0.001, n=7). The smart device application also provided 5 megapixel photography capabilities, and acute burn resuscitation fluid calculator. We developed an innovative smart device application that enables accurate and rapid burn size assessment to be cost-effective and widely accessible. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

[Cement burns: a 10-year retrospective study in our burn unit. About 55 cases].

PubMed

Besset, M; Quignon, R; Dhennin, C; Yassine, A; Penaud, A

2014-06-01

Although cement burns represents only a small percentage of admissions to burn centers, their diagnosis and treatment are specific. Our retrospective study concerns all patients treated for cement burns in our unit between 1999 and 2009. This is the largest series described. Fifty-five patients, aged from 23 to 63, were treated in our burn unit from 1999 to 2009. A review of medical and socioeconomic data was made from computer data files. This population is predominantly male, young and active. These burns occurred mainly in a domestic accident situation (78.2%). Burns were limited but deep and concerned especially lower limbs. The average duration of treatment was 39days. Forty-four patients were treated medically. The mean duration of sick live for these patients was 63 days. It was only of 21 days for those treated surgically. Aesthetic and functional sequelae were present in 88% of medically treated patients and in 18% of patients treated surgically. This study demonstrates that early surgical diagnosis and the coverage (care) of these burns allows to limit the socioeconomic echo and to reduce the risk of after-effects for this population of patients mainly young and active. The necessity of strengthening the precautionary measures with these users who are informed enough about the risks incurred during the misuse of the cement is also a reality. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Results of Propellant Mixing Variable Study Using Precise Pressure-Based Burn Rate Calculations

NASA Technical Reports Server (NTRS)

Stefanski, Philip L.

2014-01-01

A designed experiment was conducted in which three mix processing variables (pre-curative addition mix temperature, pre-curative addition mixing time, and mixer speed) were varied to estimate their effects on within-mix propellant burn rate variability. The chosen discriminator for the experiment was the 2-inch diameter by 4-inch long (2x4) Center-Perforated (CP) ballistic evaluation motor. Motor nozzle throat diameters were sized to produce a common targeted chamber pressure. Initial data analysis did not show a statistically significant effect. Because propellant burn rate must be directly related to chamber pressure, a method was developed that showed statistically significant effects on chamber pressure (either maximum or average) by adjustments to the process settings. Burn rates were calculated from chamber pressures and these were then normalized to a common pressure for comparative purposes. The pressure-based method of burn rate determination showed significant reduction in error when compared to results obtained from the Brooks' modification of the propellant web-bisector burn rate determination method. Analysis of effects using burn rates calculated by the pressure-based method showed a significant correlation of within-mix burn rate dispersion to mixing duration and the quadratic of mixing duration. The findings were confirmed in a series of mixes that examined the effects of mixing time on burn rate variation, which yielded the same results.

Inorganic markers, carbonaceous components and stable carbon isotope from biomass burning aerosols in northeast China

NASA Astrophysics Data System (ADS)

Cao, F.; Zhang, Y.; Kawamura, K.

2015-12-01

To better characterize the sources of fine particulate matter (i.e. PM2.5) in Sanjiang Plain, Northeast China, aerosol chemical composition such total carbon (TC), organic carbon (OC), elemental carbon (EC), water-soluble organic carbon (WSOC), and inorganic ions were studied as well as stable carbon isotopic composition (δ13C) of TC. Intensively open biomass burning episodes were identified from late September to early October by satellite fire and aerosol optical depth maps. During the biomass burning episodes, concentrations of PM2.5, OC, EC, and WSOC increased by a factor of 4-12 compared to non-biomass-burning periods. Non-sea-salt potassium is strongly correlated with PM2.5, OC, EC and WSOC, suggesting an important contribution of biomass burning emission. The enrichment in both the non-sea-salt potassium and chlorine is significantly larger than other inorganic species, indicating that biomass burning aerosols in Sanjiang Plain is mostly fresh and less aged. In addition, WSOC to OC ratio is relatively lower compared to that reported in biomass burning aerosols in tropical regions, supporting that biomass burning aerosols in Sanjiang Plain is mostly primary and secondary organic aerosols is not significant. A lower average δ13C value (-26.2‰) is found for the biomass-burning aerosols, suggesting a dominant contribution from combustion of C3 plants in the studied region.

Ground-based aerosol characterization during the South American Biomass Burning Analysis (SAMBBA) field experiment

NASA Astrophysics Data System (ADS)

Brito, J.; Rizzo, L. V.; Morgan, W. T.; Coe, H.; Johnson, B.; Haywood, J.; Longo, K.; Freitas, S.; Andreae, M. O.; Artaxo, P.

2014-11-01

This paper investigates the physical and chemical characteristics of aerosols at ground level at a site heavily impacted by biomass burning. The site is located near Porto Velho, Rondônia, in the southwestern part of the Brazilian Amazon rainforest, and was selected for the deployment of a large suite of instruments, among them an Aerosol Chemical Speciation Monitor. Our measurements were made during the South American Biomass Burning Analysis (SAMBBA) field experiment, which consisted of a combination of aircraft and ground-based measurements over Brazil, aimed to investigate the impacts of biomass burning emissions on climate, air quality, and numerical weather prediction over South America. The campaign took place during the dry season and the transition to the wet season in September/October 2012. During most of the campaign, the site was impacted by regional biomass burning pollution (average CO mixing ratio of 0.6 ppm), occasionally superimposed by intense (up to 2 ppm of CO), freshly emitted biomass burning plumes. Aerosol number concentrations ranged from ~1000 cm-3 to peaks of up to 35 000 cm-3 (during biomass burning (BB) events, corresponding to an average submicron mass mean concentrations of 13.7 μg m-3 and peak concentrations close to 100 μg m-3. Organic aerosol strongly dominated the submicron non-refractory composition, with an average concentration of 11.4 μg m-3. The inorganic species, NH4, SO4, NO3, and Cl, were observed, on average, at concentrations of 0.44, 0.34, 0.19, and 0.01 μg m-3, respectively. Equivalent black carbon (BCe) ranged from 0.2 to 5.5 μg m-3, with an average concentration of 1.3 μg m-3. During BB peaks, organics accounted for over 90% of total mass (submicron non-refractory plus BCe), among the highest values described in the literature. We examined the ageing of biomass burning organic aerosol (BBOA) using the changes in the H : C and O : C ratios, and found that throughout most of the aerosol processing (O : C ≅ 0.25 to O : C ≅ 0.6), no remarkable change is observed in the H : C ratio (~1.35). Such a result contrasts strongly with previous observations of chemical ageing of both urban and Amazonian biogenic aerosols. At higher levels of processing (O : C > 0.6), the H : C ratio changes with a H : C / O : C slope of -0.5, possibly due to the development of a combination of BB (H : C / O : C slope = 0) and biogenic (H : C /O :C slope =-1) organic aerosol (OA). An analysis of the ΔOA /ΔCO mass ratios yields very little enhancement in the OA loading with atmospheric processing, consistent with previous observations. These results indicate that negligible secondary organic aerosol (SOA) formation occurs throughout the observed BB plume processing, or that SOA formation is almost entirely balanced by OA volatilization. Positive matrix factorization (PMF) of the organic aerosol spectra resulted in three factors: fresh BBOA, aged BBOA, and low-volatility oxygenated organic aerosol (LV-OOA). Analysis of the diurnal patterns and correlation with external markers indicates that during the first part of the campaign, OA concentrations are impacted by local fire plumes with some chemical processing occurring in the near-surface layer. During the second part of the campaign, long-range transport of BB plumes above the surface layer, as well as potential SOAs formed aloft, dominates OA concentrations at our ground-based sampling site. This manuscript describes the first ground-based deployment of the aerosol mass spectrometry at a site heavily impacted by biomass burning in the Amazon region, allowing a deeper understanding of aerosol life cycle in this important ecosystem.

A clinico-epidemiological study of rescuer burns.

PubMed

Basra, Baljeet Kumar; Suri, Manav P; Patil, Nilesh; Atha, Ravish; Patel, Natvar; Sachde, Jayesh P; Shaikh, M F

2014-08-01

Rescuer burn is a relatively newer terminology introduced to define the burns sustained by a person attempting to rescue a primary burn victim. Few studies have been published thus far on this peculiar type of burns. Due to the general neglect of the rescuer burns victim and discontinuation of treatment in most cases, once the primary victim dies, the rescuer often ends up in badly infected wounds and has a delayed return to work. A prospective study was conducted at the B J Medical College and Civil Hospital, Ahmedabad from January 2009 to December 2012 on the rescuer burns patients treated in its burns and plastic surgery department. 3074 patients of burns received treatment during the period of study. Of these, 48 patients gave the history of sustaining burns while trying to rescue a burns victim. Male to female ratio of rescuers was approximately 7:1. It was significantly higher as compared to the ratio of 1:0.8 of females to male burn victims observed at our centre (p≤0.01). Average age of the rescuers was higher in males as compared to females but the difference was not significant (p≥0.05). Of the 45 cases of female primary burns victims, male rescuer was husband of the primary victim in 41/45 cases (91.1%), mother was rescuer in three cases (6.6% cases) and sister was rescuer in one case. Though multiple people came to rescue a burns victim, in all cases, it was seen that it was the first rescuer who sustained burns himself or herself. None of the rescuers had any knowledge of the techniques and precautions to be taken while performing a rescue operation irrespective of their education status, indirectly pointing to the lack of any teaching on burns rescue in the school education curriculum. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Behavioral-Physiological Effects of Red Phosphorous Smoke Inhalation on Two Wildlife Species. Task 1. Inhalation Equipment Development/Ambient CO evaluation/Aerosol Distribution and Air Quality Study

DTIC Science & Technology

1987-12-01

occurred in only negligible quantities. Carbo /monoxide was found-to occur in measurable amounts during practically all burns , wit average readings of from...generation. This involved a total of 64 RP/BR burns at target concentrations of 0.4, 1.5, and 3.0 mg/l and 3.0, 4.5, and 6.0 mg/l with air-flow rates of...500 and 250 I/min, respectively. Each burn lasted approximately 1 h and 45 min. Spatial uniformity of RP/BR concentra- tion was assessed by sampling

Effectiveness of a chemical herder in association with in-situ burning of oil spills in ice-infested water.

PubMed

van Gelderen, Laurens; Fritt-Rasmussen, Janne; Jomaas, Grunde

2017-02-15

The average herded slick thickness, surface distribution and burning efficiency of a light crude oil were studied in ice-infested water to determine the effectiveness of a chemical herder in facilitating the in-situ burning of oil. Experiments were performed in a small scale (1.0m 2 ) and an intermediate scale (19m 2 ) setup with open water and 3/10, 5/10 and 7/10 brash ice coverages. The herded slick thicknesses (3-8mm) were ignitable in each experiment. The presence of ice caused fracturing of the oil during the herding process, which reduced the size of the herded slicks and, as a consequence, their ignitability, which in turn decreased the burning efficiency. Burning efficiencies relative to the ignited fraction of the oil were in the expected range (42-86%). This shows that the herder will be an effective tool for in-situ burning of oil when the ignitability issues due to fracturing of the oil are resolved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Acceptability and functionality of the "Kettle Strap": An attempt to decrease kettle related burns in children.

PubMed

Makhubalo, Obakeng; Schulman, Dorothy; Rode, Heinz; Cox, Sharon

2018-05-15

Extensive hot water burns (HWB) are common at Red Cross War Memorial Children's Hospital (RCWMCH). The majority are caused by kettle scalds. These burn injuries usually affect toddlers living in poor socio-economic circumstances. The majority of these injuries are preventable. This trial aims to demonstrate the acceptability and functionality of the Kettle Strap as a kettle safety device. The feedback will be used for a public awareness program marketed by the Child Accident Prevention Foundation of Southern Africa and ChildSafe as part of their mandate to reduce kettle related thermal injuries. 50 caregivers of children at RCWMCH were given a Kettle Strap for use in their homes, 25 with kettle related burns (Group I) and 25 who had no history of burns (Group II). All participants were instructed on Kettle Strap installation and use. Telephonic interviews on the acceptability and functionality of the strap occurred 1 month and 1 year later. The average age in Groups I and II was 25 and 22 months respectively. In Group I, the average burn surface area was 15%. Nineteen (76%) of the accidents occurred in the kitchen. Eighteen (72%) received immediate first aid. Twelve (48%) in Group I and 15 (60%) in Group II lived in formal housing. The majority of caregivers (90%) indicated that installation was quick and easy and thought that the Kettle Strap would prevent kettle burns. At 1 month follow-up, all the participants in Group I indicated that they would continue using the apparatus and felt greater protection compared to 84% of Group II. Only 40% indicated that use of the Kettle Strap raised awareness of other possible household dangers. Thirty participants were available telephonically after 1 year, 22 of these were still using the device, others had moved or lost their homes to fire. All participants had informed neighbors about the Kettle Strap and burn safety. The participants were prepared to pay ZAR 44 for the complete apparatus. The Kettle Strap is an acceptable, affordable device to improve kettle safety in the home. Copyright © 2018 Elsevier Ltd and ISBI. All rights reserved.

Sources of the PM10 aerosol in Flanders, Belgium, and re-assessment of the contribution from wood burning.

PubMed

Maenhaut, Willy; Vermeylen, Reinhilde; Claeys, Magda; Vercauteren, Jordy; Roekens, Edward

2016-08-15

From 30 June 2011 to 2 July 2012 PM10 aerosol samples were simultaneously taken every 4th day at four urban background sites in Flanders, Belgium. The sites were in Antwerpen, Gent, Brugge, and Oostende. The PM10 mass concentration was determined by weighing; organic and elemental carbon (OC and EC) were measured by thermal-optical analysis, the wood burning tracers levoglucosan, mannosan and galactosan were determined by gas chromatography/mass spectrometry, 8 water-soluble ions were measured by ion chromatography, and 15 elements were determined by a combination of inductively coupled plasma atomic emission spectrometry and mass spectrometry. The multi-species dataset was subjected to receptor modeling by PMF. The 10 retained factors (with their overall average percentage contributions to the experimental PM10 mass) were wood burning (9.5%), secondary nitrate (24%), secondary sulfate (12.6%), sea salt (10.0%), aged sea salt (19.2%), crustal matter (9.7%), non-ferrous metals (1.81%), traffic (10.3%), non-exhaust traffic (0.52%), and heavy oil burning (3.0%). The average contributions of wood smoke for the four sites were quite substantial in winter and ranged from 12.5 to 20% for the PM10 mass and from 47 to 64% for PM10 OC. Wood burning appeared to be also a notable source of As, Cd, and Pb. The contribution from wood burning to the PM10 mass and OC was also assessed by making use of levoglucosan as single marker compound and the conversion factors of Schmidl et al. (2008), as done in our previous study on wood burning in Flanders (Maenhaut et al., 2012). However, the apportionments were much lower than those deduced from PMF. It seems that the conversion factors of Schmidl et al. (2008) may not be applicable to wood burning in Flanders. From scatter plots of the PMF-derived wood smoke OC and PM versus levoglucosan, we arrived at conversion factors of 9.7 and 22.6, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessment of biomass burning emissions and their impacts on urban and regional PM2.5: a Georgia case study.

PubMed

Tian, Di; Hu, Yongtao; Wang, Yuhang; Boylan, James W; Zheng, Mei; Russell, Armistead G

2009-01-15

Biomass burning is a major and growing contributor to particulate matter with an aerodynamic diameter less than 2.5 microm (PM2.5). Such impacts (especially individual impacts from each burning source) are quantified using the Community Multiscale Air Quality (CMAQ) Model, a chemical transport model (CTM). Given the sensitivity of CTM results to uncertain emission inputs, simulations were conducted using three biomass burning inventories. Shortcomings in the burning emissions were also evaluated by comparing simulations with observations and results from a receptor model. Model performance improved significantly with the updated emissions and speciation profiles based on recent measurements for biomass burning: mean fractional bias is reduced from 22% to 4% for elemental carbon and from 18% to 12% for organic matter; mean fractional error is reduced from 59% to 50% for elemental carbon and from 55% to 49% for organic matter. Quantified impacts of biomass burning on PM2.5 during January, March, May, and July 2002 are 3.0, 5.1, 0.8, and 0.3 microg m(-3) domainwide on average, with more than 80% of such impacts being from primary emissions. Impacts of prescribed burning dominate biomass burning impacts, contributing about 55% and 80% of PM2.5 in January and March, respectively, followed by land clearing and agriculture field burning. Significant impacts of wildfires in May and residential wood combustion in fireplaces and woodstoves in January are also found.

Using NDVI to assess departure from average greenness and its relation to fire business

Treesearch

Robert E. Burgan; Roberta A. Hartford; Jeffery C. Eidenshink

1996-01-01

A new satellite-derived vegetation greenness map, departure from average, is designed to compare current-year vegetation greenness with average greenness for the same time of year. Live-fuel condition as portrayed on this map, and the calculated 1,000-hour fuel moistures, are compared to fire occurrence and area burned in Montana and Idaho during the 1993 and 1994 fire...

METHOD FOR THE PREPARATION OF STABLE ACTINIDE METAL OXIDE-CONTAINING SLURRIES AND OF THE OXIDES THEREFOR

DOEpatents

Hansen, R.S.; Minturn, R.E.

1958-02-25

This patent deals with a method of preparing actinide metal oxides of a very fine particle size and of forming stable suspensions therefrom. The process consists of dissolving the nitrate of the actinide element in a combustible organic solvent, converting the solution obtained into a spray, and igniting the spray whereby an oxide powder is obtained. The oxide powder is then slurried in an aqueous soiution of a substance which is adsorbable by said oxides, dspersed in a colloid mill whereby a suspension is obtained, and electrodialyzed until a low spectiic conductance is reached.

Analogue Study of Actinide Transport at Sites in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novikov, A P; Simmons, A M; Halsey, W G

2003-02-12

The U. S. Department of Energy (DOE) and the Russian Academy of Sciences (RAS) are engaged in a three-year cooperative study to observe the behavior of actinides in the natural environment at selected disposal sites and/or contamination sites in Russia. The purpose is to develop experimental data and models for actinide speciation, mobilization and transport processes in support of geologic repository design, safety and performance analyses. Currently at the mid-point of the study, the accomplishments to date include: evaluation of existing data and data needs, site screening and selection, initial data acquisition, and development of preliminary conceptual models.

Method for extracting lanthanides and actinides from acid solutions by modification of Purex solvent

DOEpatents

Horwitz, E.P.; Kalina, D.G.

1984-05-21

A process has been developed for the extraction of multivalent lanthanide and actinide values from acidic waste solutions, and for the separation of these values from fission product and other values, which utilizes a new series of neutral bi-functional extractants, the alkyl(phenyl)-N, N-dialkylcarbamoylmethylphosphine oxides, in combination with a phase modifier to form an extraction solution. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

SOLVENT EXTRACTION PROCESS FOR SEPARATING ACTINIDE AND LANTHANIDE METAL VALUES

DOEpatents

Hildebrandt, R.A.; Hyman, H.H.; Vogler, S.

1962-08-14

A process of countercurrently extracting an aqueous mineral acid feed solution for the separation of actinides from lanthanides dissolved therern is described. The feed solution is made acid-defrcient with alkali metal hydroxide prior to.contact with acid extractant; during extraction, however, acid is transferred from organic to aqueous solution and the aqueous solution gradually becomes acid. The acid-deficient phase ' of the process promotes the extraction of the actinides, while the latter acid phase'' of the process improves retention of the lanthanides in the aqueous solution. This provides for an improved separation. (AEC)

Effect of oxidation state and ionic strength on sorption of actinides (Th, U, Np, Am) to geologic media [Abstract and References Only

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dittrich, Timothy M.; Richmann, Michael K.; Reed, Donald T.

2015-10-30

The degree of conservatism in the estimated sorption partition coefficients (K ds) used in a performance assessment model is being evaluated based on a complementary batch and column method. The main focus of this work is to investigate the role of ionic strength, solution chemistry, and oxidation state (III-VI) in actinide sorption to dolomite rock. Based on redox conditions and solution chemistry expected at the WIPP, possible actinide species include Pu(III), Pu(IV), U(IV), U(VI), Np(IV), Np(V), Am(III), and Th(IV).

Actinide Sputtering Induced by Fission with Ultra-cold Neutrons

NASA Astrophysics Data System (ADS)

Shi, Tan; Venuti, Michael; Fellers, Deion; Martin, Sean; Morris, Chris; Makela, Mark

2017-09-01

Understanding the effects of actinide sputtering due to nuclear fission is important for a wide range of applications, including nuclear fuel storage, space science, and national defense. A new program at the Los Alamos Neutron Science Center uses ultracold neutrons (UCN) to induce fission in actinides such as uranium and plutonium. By controlling the UCN energy, it is possible to induce fission at the sample surface within a well-defined depth. It is therefore an ideal tool for studying the effects of fission-induced sputtering as a function of interaction depth. Since the mechanism for fission-induced surface damage is not well understood, this work has the potential to deconvolve the various damage mechanisms. During the irradiation with UCN, NaI detectors are used to monitor the fission events and were calibrated by monitoring fission fragments with an organic scintillator. Alpha spectroscopy of the ejected actinide material is performed in an ion chamber to determine the amount of sputtered material. Actinide samples with various sample properties and surface conditions are irradiated and analyzed. In this talk, I will discuss our experimental setup and present the preliminary results from the testing of multiple samples. This work has been supported by Los Alamos National Laboratory and Seaborg Summer Research Fellowship.

Ceramification: A plutonium immobilization process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rask, W.C.; Phillips, A.G.

1996-05-01

This paper describes a low temperature technique for stabilizing and immobilizing actinide compounds using a combination process/storage vessel of stainless steel, in which measured amounts of actinide nitrate solutions and actinide oxides (and/or residues) are systematically treated to yield a solid article. The chemical ceramic process is based on a coating technology that produces rare earth oxide coatings for defense applications involving plutonium. The final product of this application is a solid, coherent actinide oxide with process-generated encapsulation that has long-term environmental stability. Actinide compounds can be stabilized as pure materials for ease of re-use or as intimate mixtures withmore » additives such as rare earth oxides to increase their degree of proliferation resistance. Starting materials for the process can include nitrate solutions, powders, aggregates, sludges, incinerator ashes, and others. Agents such as cerium oxide or zirconium oxide may be added as powders or precursors to enhance the properties of the resulting solid product. Additives may be included to produce a final product suitable for use in nuclear fuel pellet production. The process is simple and reduces the time and expense for stabilizing plutonium compounds. It requires a very low equipment expenditure and can be readily implemented into existing gloveboxes. The process is easily conducted with less associated risk than proposed alternative technologies.« less

Photochemical route to actinide-transition metal bonds: synthesis, characterization and reactivity of a series of thorium and uranium heterobimetallic complexes.

PubMed

Ward, Ashleigh L; Lukens, Wayne W; Lu, Connie C; Arnold, John

2014-03-05

A series of actinide-transition metal heterobimetallics has been prepared, featuring thorium, uranium, and cobalt. Complexes incorporating the binucleating ligand N[ο-(NHCH2P(i)Pr2)C6H4]3 with either Th(IV) (4) or U(IV) (5) and a carbonyl bridged [Co(CO)4](-) unit were synthesized from the corresponding actinide chlorides (Th: 2; U: 3) and Na[Co(CO)4]. Irradiation of the resulting isocarbonyls with ultraviolet light resulted in the formation of new species containing actinide-metal bonds in good yields (Th: 6; U: 7); this photolysis method provides a new approach to a relatively unusual class of complexes. Characterization by single-crystal X-ray diffraction revealed that elimination of the bridging carbonyl and formation of the metal-metal bond is accompanied by coordination of a phosphine arm from the N4P3 ligand to the cobalt center. Additionally, actinide-cobalt bonds of 3.0771(5) Å and 3.0319(7) Å for the thorium and uranium complexes, respectively, were observed. The solution-state behavior of the thorium complexes was evaluated using (1)H, (1)H-(1)H COSY, (31)P, and variable-temperature NMR spectroscopy. IR, UV-vis/NIR, and variable-temperature magnetic susceptibility measurements are also reported.

Photochemical route to actinide-transition metal bonds: synthesis, characterization and reactivity of a series of thorium and uranium heterobimetallic complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, Ashleigh; Lukens, Wayne; Lu, Connie

2014-04-01

A series of actinide-transition metal heterobimetallics has been prepared, featuring thorium, uranium and cobalt. Complexes incorporating the binucleating ligand N[-(NHCH2PiPr2)C6H4]3 and Th(IV) (4) or U(IV) (5) with a carbonyl bridged [Co(CO)4]- unit were synthesized from the corresponding actinide chlorides (Th: 2; U: 3) and Na[Co(CO)4]. Irradiation of the isocarbonyls with ultraviolet light resulted in the formation of new species containing actinide-metal bonds in good yields (Th: 6; U: 7); this photolysis method provides a new approach to a relatively rare class of complexes. Characterization by single-crystal X-ray diffraction revealed that elimination of the bridging carbonyl is accompanied by coordination ofmore » a phosphine arm from the N4P3 ligand to the cobalt center. Additionally, actinide-cobalt bonds of 3.0771(5) and 3.0319(7) for the thorium and uranium complexes, respectively, were observed. The solution state behavior of the thorium complexes was evaluated using 1H, 1H-1H COSY, 31P and variable-temperature NMR spectroscopy. IR, UV-Vis/NIR, and variable-temperature magnetic susceptibility measurements are also reported.« less

Aqueous Electrochemical Mechanisms in Actinide Residue Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, David E.; Burns, Carol J.; Smith, Wayne H.

2000-12-31

Plutonium and uranium residues (e.g., incinerator ash, combustibles, and sand/slag/crucibles) resulting from the purification and processing of nuclear materials constitute an enormous volume of ''lean'' processing waste and represent a significant fraction of the U. S. Department of Energy's (DOE) legacy waste from fifty years of nuclear weapons production activities. Much of this material is presently in storage at sites throughout the DOE weapons production complex (most notably Rocky Flats, Savannah River and Hanford) awaiting further processing and/or final disposition. The chemical and physical stability of much of this material has been called into question recently by the Defense Nuclearmore » Facility Safety Board (DNFSB) and resulted in the issuance of a mandate by the DNFSB to undertake a program to stabilize these materials [1]. The ultimate disposition for much of these materials is anticipated to be geologic repositories such as the proposed Waste Isolation Pilot Plant in New Mexico. However, in light of the mandate to stabilize existing residues and the probable concomitant increase in the volume of material to be disposed as a result of stabilization (e.g., from repackaging at lower residue densities), the projected storage volume for these wastes within anticipated geologic repositories will likely be exceeded simply to handle existing wastes. Additional processing of some of these residue waste streams to reduce radionuclide activity levels, matrix volume, or both is a potentially important strategy to achieve both stabilization and volume reduction so that the anticipated geologic repositories will provide adequate storage volume. In general, the plutonium and uranium that remains in solid residue materials exists in a very stable chemical form (e.g., as binary oxides), and the options available to remove the actinides are limited. However, there have been some demonstrated successes in this vain using aqueous phase electrochemical methods such as the Catalyzed Electrochemical Plutonium Oxide Dissolution (CEPOD) process pioneered by workers at Pacific Northwest National Laboratory in the mid-1970s [2]. The basis for most of these mediated electrochemical oxidation/reduction (MEO/R) processes is the generation of a dissolved electrochemical catalyst, such as Ag2+, which is capable of oxidizing or reducing solid-phase actinide species or actinide sorbates via 7 heterogeneous electron transfer to oxidation states that have significantly greater solubilities (e.g., PuO2(s) to PuO2 2+ (dissolved)). The solubilized actinide can then be recovered by ion exchange or other mechanisms. These aqueous electrochemical methods for residue treatment have been considered in many of the ''trade studies'' to evaluate options for stabilization of the various categories of residue materials. While some concerns generally arise (e.g., large secondary waste volumes could results since the process stream normally goes th rough anion exchange or precipitation steps to remove the actinide), the real utility and versatility of these methods should not be overlooked. They are low temperature, ambient pressure processes that operate in a non-corrosive environment. In principle, they can be designed to be highly selective for the actinides (i.e., no substrate degradation occurs), they can be utilized for many categories of residue materials with little or no modification in hardware or operating conditions, and they can conceivably be engineered to minimize secondary waste stream volume. However, some fundamental questions remain concerning the mechanisms through which these processes act, and how the processes might be optimized to maximize efficiency while minimizing secondary waste. In addition, given the success achieved to date on the limited set of residues, further research is merited to extend the range of applicability of these electrochemical methods to other residue and waste streams. The principal goal of the work described here is to develop a fundamental understanding of the heterogeneous electron transfer thermodynamics and kinetics that lie at the heart of the MEO/R processes for actinide solids and actinide species entrained in or surface-bound to residue substrates. This has been accomplished as described in detail below through spectroscopic characterization of actinide-bearing substrates and electrochemical investigations of electron transfer reactions between uranium- and plutonium- (or surrogates) bearing solids (dispersed actinide solid phases and actinides sorbed to inorganic and organic colloids) and polarizable electrode materials. In general, the actinide solids or substrate-supported species were chosen to represent relevant residue materials (e.g., incinerator ash, sand/slag/crucible, and combustibles).« less

Is location of burns related to outcome? A comparison between burns on extremities and burns on head and/or trunk in patients with low to intermediate TBSA in a burn center in The Netherlands.

PubMed

Menger, Tirsa; Krijnen, Pieta; Tuinebreijer, Willem E; Breederveld, Roelf S

2014-01-01

In the literature no study was found about the effect of location of burns on outcome. The objective of this retrospective study was to investigate the effect of location on outcome parameters of 371 patients, admitted to our burn center from January 2009 to December 2011. The patients were included in the study if more than 80% of the burn(s) was localized either on the extremities or on the head and/or trunk. Two groups of TBSA were elaborated, low: 0 to 5% and intermediate: 5 to 15%. Two-hundred ninety-two patients (78.7%) had a low TBSA (<5%) and 79 (21.3%) an intermediate TBSA (5-15%). None of the included patients died. The patients with an intermediate TBSA were on average 8.0 days longer admitted compared with the patients with a low TBSA adjusted for age and depth (95% confidence interval: 6.5-9.4). The patients with burns on the head and/or trunk were more often admitted to the intensive care unit, mostly as a result of suspected inhalation injury (6.2 vs 0.9%; P = .008). More complications were seen in the intermediate TBSA group. In this study no difference in outcome was found between burns on the head and/or trunk or on extremities. The patients with burns on the head and/or trunk group are more frequently admitted to intensive care.

Recent Biomass Burning in the Tropics and Related Changes in Tropospheric Ozone

NASA Technical Reports Server (NTRS)

Ziemke; Chandra, J. R. S.; Duncan, B. N.; Schoeberl, M. R.; Torres, O.; Damon, M. R.; Bhartia, P. K.

2009-01-01

Biomass burning is an important source of chemical precursors of tropospheric ozone. In the tropics, biomass burning produces ozone enhancements over broad regions of Indonesia, Africa, and South America including Brazil. Fires are intentionally set in these regions during the dry season each year to clear cropland and to clear land for human/industrial expansion. In Indonesia enhanced burning occurs during dry El Nino conditions such as in 1997 and 2006. These burning activities cause enhancement in atmospheric particulates and trace gases which are harmful to human health. Measurements from the Aura Ozone Monitoring Instrument (OMI) and Microwave Limb Sounder (MLS) from October 2004-November 2008 are used to evaluate the effects of biomass burning on tropical tropospheric ozone. These measurements show sizeable decreases approx.15-20% in ozone in Brazil during 2008 compared to 2007 which we attribute to the reduction in biomass burning. Three broad biomass burning regions in the tropics (South America including Brazil, western Africa, and Indonesia) were analyzed in the context of OMI/MLS measurements and the Global Modeling Initiative (GMI) chemical transport model developed at Goddard Space Flight Center. The results indicate that the impact of biomass burning on ozone is significant within and near the burning regions with increases of approx.10-25% in tropospheric column ozone relative to average background concentrations. The model suggests that about half of the increases in ozone from these burning events come from altitudes below 3 km. Globally the model indicates increases of approx.4-5% in ozone, approx.7-9% in NO, (NO+NO2), and approx.30-40% in CO.

Forest edge burning in the Brazilian Amazon promoted by escaping fires from managed pastures

NASA Astrophysics Data System (ADS)

Cano-Crespo, Ana; Oliveira, Paulo J. C.; Boit, Alice; Cardoso, Manoel; Thonicke, Kirsten

2015-10-01

Understanding to what extent different land uses influence fire occurrence in the Amazonian forest is particularly relevant for its conservation. We evaluate the relationship between forest fires and different anthropogenic activities linked to a variety of land uses in the Brazilian states of Mato Grosso, Pará, and Rondônia. We combine the new high-resolution (30 m) TerraClass land use database with Moderate Resolution Imaging Spectroradiometer burned area data for 2008 and the extreme dry year of 2010. Excluding the non-forest class, most of the burned area was found in pastures, primary and secondary forests, and agricultural lands across all three states, while only around 1% of the total was located in deforested areas. The trend in burned area did not follow the declining deforestation rates from 2001 to 2010, and the spatial overlap between deforested and burned areas was only 8% on average. This supports the claim of deforestation being disconnected from burning since 2005. Forest degradation showed an even lower correlation with burned area. We found that fires used in managing pastoral and agricultural lands that escape into the neighboring forests largely contribute to forest fires. Such escaping fires are responsible for up to 52% of the burned forest edges adjacent to burned pastures and up to 22% of the burned forest edges adjacent to burned agricultural fields, respectively. Our findings call for the development of control and monitoring plans to prevent fires from escaping from managed lands into forests to support effective land use and ecosystem management.

Renewability and sustainability aspects of nuclear energy

NASA Astrophysics Data System (ADS)

Şahin, Sümer

2014-09-01

Renewability and sustainability aspects of nuclear energy have been presented on the basis of two different technologies: (1) Conventional nuclear technology; CANDU reactors. (2) Emerging nuclear technology; fusion/fission (hybrid) reactors. Reactor grade (RG) plutonium, 233U fuels and heavy water moderator have given a good combination with respect to neutron economy so that mixed fuel made of (ThO2/RG-PuO2) or (ThC/RG-PuC) has lead to very high burn up grades. Five different mixed fuel have been selected for CANDU reactors composed of 4 % RG-PuO2 + 96 % ThO2; 6 % RG-PuO2 + 94 % ThO2; 10 % RG-PuO2 + 90 % ThO2; 20 % RG-PuO2 + 80 % ThO2; 30 % RG-PuO2 + 70 % ThO2, uniformly taken in each fuel rod in a fuel channel. Corresponding operation lifetimes have been found as ˜ 0.65, 1.1, 1.9, 3.5, and 4.8 years and with burn ups of ˜ 30 000, 60 000, 100 000, 200 000 and 290 000 MW.d/ton, respectively. Increase of RG-PuO2 fraction in radial direction for the purpose of power flattening in the CANDU fuel bundle has driven the burn up grade to 580 000 MW.d/ton level. A laser fusion driver power of 500 MWth has been investigated to burn the minor actinides (MA) out of the nuclear waste of LWRs. MA have been homogenously dispersed as carbide fuel in form of TRISO particles with volume fractions of 0, 2, 3, 4 and 5 % in the Flibe coolant zone in the blanket surrounding the fusion chamber. Tritium breeding for a continuous operation of the fusion reactor is calculated as TBR = 1.134, 1.286, 1.387, 1.52 and 1.67, respectively. Fission reactions in the MA fuel under high energetic fusion neutrons have lead to the multiplication of the fusion energy by a factor of M = 3.3, 4.6, 6.15 and 8.1 with 2, 3, 4 and 5 % TRISO volume fraction at start up, respectively. Alternatively with thorium, the same fusion driver would produce ˜160 kg 233U per year in addition to fission energy production in situ, multiplying the fusion energy by a factor of ˜1.3.

[Enteral nutrition in burn patients].

PubMed

Pereira, J L; Garrido, M; Gómez-Cía, T; Serrera, J L; Franco, A; Pumar, A; Relimpio, F; Astorga, R; García-Luna, P P

1992-01-01

Nutritional support plays an important role in the treatment of patients with burns. Due to the severe hypercatabolism that develops in these patients, oral support is insufficient in most cases, and this makes it essential to initiate artificial nutritional support (either enteral or parenteral). Enteral nutrition is more physiological than parenteral, and data exist which show that in patients with burns, enteral nutrition exercises a protective effect on the intestine and may even reduce the hypermetabolic response in these patients. The purpose of the study was to evaluate the effectiveness and tolerance of enteral nutritional support with a hypercaloric, hyperproteic diet with a high content of branched amino acids in the nutritional support of patients suffering from burns. The study included 12 patients (8 males and 4 females), admitted to the Burns Unit. Average age was 35 +/- 17 years (range: 21-85 years). The percentage of body surface affected by the burns was 10% in two cases, between 10-30% in three cases, between 30-50% in five cases and over 50% in two cases. Initiation of the enteral nutrition was between twenty-four hours and seven days after the burn. The patients were kept in the unit until they were discharged, and the average time spent in the unit was 31.5 days (range: 17-63 days). Total energetic requirements were calculated based on Harris-Benedict, with a variable aggression factor depending on the body surface burned, which varied from 2,000 and 4,000 cal day. Nitrogenous balance was determined on a daily basis, and plasmatic levels of total proteins, albumin and prealbumin on a weekly basis. There was a significant difference between the prealbumin values at the initiation and finalization of the enteral nutrition (9.6 +/- 2.24 mg/dl compared with 19.75 +/- 5.48 mg/dl; p < 0.001). The nitrogenous balance improved, changing from -5.4 in the second week to positive values by the fourth and fifth weeks of treatment. Tolerance to the enteral diet was very good, and only mild complications such as diarrhoea developed in two patients. Enteral nutrition is a suitable nutritional support method for patients with burns, which maintains the nitrogenous balance positive and improves the visceral protein parameters in these patients at an early stage, with very few complications.

Relationships between fire danger and the daily number and daily growth of active incidents burning in the northern Rocky Mountains, USA

Treesearch

Patrick H. Freeborn; Mark A. Cochrane; W. Matt Jolly

2015-01-01

Daily National Fire Danger Rating System (NFDRS) indices are typically associated with the number and final size of newly discovered fires, or averaged over time and associated with the likelihood and total burned area of large fires. Herein we used a decade (2003-12) of NFDRS indices and US Forest Service (USFS) fire reports to examine daily relationships between fire...

Economic Burden of Drug Use in Patients with Acute Burns: Experience in a Developing Country

PubMed Central

Ogundipe, Kolawole Olubunmi; Adigun, Ismaila Abiona; Solagberu, Babatunde Akeeb

2009-01-01

Background/Objective. Burn injury is a devastating injury. The economic drain on the patient's purse is equally devastating. Few studies have examined the cost of managing burn patients particularly the drug component. Methods. The financial implication of drug use in the management of 69 consecutive patients admitted by the burn unit over a period of two years was retrospectively analysed. Results. Thirty-six (52.2%) patients were males and 33 (47.8%) females with a mean age of 17.9 years (SD = 18.4). The patients spent an average sum of $91.21 to procure drugs; 84.3% of the costs were for antibiotics, 11.1% for analgesics, and 4.6% for others. Conclusion. Significant amount of money is spent on the procurement of drugs. Most of the money is spent on prescribed antibiotics. Measures that reduce antibiotics use in burn management might relief patients of the huge economic burden associated with its use. PMID:20339469

Antiseptics for burns.

PubMed

Norman, Gill; Christie, Janice; Liu, Zhenmi; Westby, Maggie J; Jefferies, Jayne M; Hudson, Thomas; Edwards, Jacky; Mohapatra, Devi Prasad; Hassan, Ibrahim A; Dumville, Jo C

2017-07-12

Burn wounds cause high levels of morbidity and mortality worldwide. People with burns are particularly vulnerable to infections; over 75% of all burn deaths (after initial resuscitation) result from infection. Antiseptics are topical agents that act to prevent growth of micro-organisms. A wide range are used with the intention of preventing infection and promoting healing of burn wounds. To assess the effects and safety of antiseptics for the treatment of burns in any care setting. In September 2016 we searched the Cochrane Wounds Specialised Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Ovid MEDLINE, Ovid MEDLINE (In-Process & Other Non-Indexed Citations), Ovid Embase, and EBSCO CINAHL. We also searched three clinical trials registries and references of included studies and relevant systematic reviews. There were no restrictions based on language, date of publication or study setting. We included randomised controlled trials (RCTs) that enrolled people with any burn wound and assessed the use of a topical treatment with antiseptic properties. Two review authors independently performed study selection, risk of bias assessment and data extraction. We included 56 RCTs with 5807 randomised participants. Almost all trials had poorly reported methodology, meaning that it is unclear whether they were at high risk of bias. In many cases the primary review outcomes, wound healing and infection, were not reported, or were reported incompletely.Most trials enrolled people with recent burns, described as second-degree and less than 40% of total body surface area; most participants were adults. Antiseptic agents assessed were: silver-based, honey, Aloe Vera, iodine-based, chlorhexidine or polyhexanide (biguanides), sodium hypochlorite, merbromin, ethacridine lactate, cerium nitrate and Arnebia euchroma. Most studies compared antiseptic with a topical antibiotic, primarily silver sulfadiazine (SSD); others compared antiseptic with a non-antibacterial treatment or another antiseptic. Most evidence was assessed as low or very low certainty, often because of imprecision resulting from few participants, low event rates, or both, often in single studies. Antiseptics versus topical antibioticsCompared with the topical antibiotic, SSD, there is low certainty evidence that, on average, there is no clear difference in the hazard of healing (chance of healing over time), between silver-based antiseptics and SSD (HR 1.25, 95% CI 0.94 to 1.67; I 2 = 0%; 3 studies; 259 participants); silver-based antiseptics may, on average, increase the number of healing events over 21 or 28 days' follow-up (RR 1.17 95% CI 1.00 to 1.37; I 2 = 45%; 5 studies; 408 participants) and may, on average, reduce mean time to healing (difference in means -3.33 days; 95% CI -4.96 to -1.70; I 2 = 87%; 10 studies; 979 participants).There is moderate certainty evidence that, on average, burns treated with honey are probably more likely to heal over time compared with topical antibiotics (HR 2.45, 95% CI 1.71 to 3.52; I 2 = 66%; 5 studies; 140 participants).There is low certainty evidence from single trials that sodium hypochlorite may, on average, slightly reduce mean time to healing compared with SSD (difference in means -2.10 days, 95% CI -3.87 to -0.33, 10 participants (20 burns)) as may merbromin compared with zinc sulfadiazine (difference in means -3.48 days, 95% CI -6.85 to -0.11, 50 relevant participants). Other comparisons with low or very low certainty evidence did not find clear differences between groups.Most comparisons did not report data on infection. Based on the available data we cannot be certain if antiseptic treatments increase or reduce the risk of infection compared with topical antibiotics (very low certainty evidence). Antiseptics versus alternative antisepticsThere may be some reduction in mean time to healing for wounds treated with povidone iodine compared with chlorhexidine (MD -2.21 days, 95% CI 0.34 to 4.08). Other evidence showed no clear differences and is of low or very low certainty. Antiseptics versus non-antibacterial comparatorsWe found high certainty evidence that treating burns with honey, on average, reduced mean times to healing in comparison with non-antibacterial treatments (difference in means -5.3 days, 95% CI -6.30 to -4.34; I 2 = 71%; 4 studies; 1156 participants) but this comparison included some unconventional treatments such as amniotic membrane and potato peel. There is moderate certainty evidence that honey probably also increases the likelihood of wounds healing over time compared to unconventional anti-bacterial treatments (HR 2.86, 95% C 1.60 to 5.11; I 2 = 50%; 2 studies; 154 participants).There is moderate certainty evidence that, on average, burns treated with nanocrystalline silver dressings probably have a slightly shorter mean time to healing than those treated with Vaseline gauze (difference in means -3.49 days, 95% CI -4.46 to -2.52; I 2 = 0%; 2 studies, 204 participants), but low certainty evidence that there may be little or no difference in numbers of healing events at 14 days between burns treated with silver xenograft or paraffin gauze (RR 1.13, 95% CI 0.59 to 2.16 1 study; 32 participants). Other comparisons represented low or very low certainty evidence.It is uncertain whether infection rates in burns treated with either silver-based antiseptics or honey differ compared with non-antimicrobial treatments (very low certainty evidence). There is probably no difference in infection rates between an iodine-based treatment compared with moist exposed burn ointment (moderate certainty evidence). It is also uncertain whether infection rates differ for SSD plus cerium nitrate, compared with SSD alone (low certainty evidence).Mortality was low where reported. Most comparisons provided low certainty evidence that there may be little or no difference between many treatments. There may be fewer deaths in groups treated with cerium nitrate plus SSD compared with SSD alone (RR 0.22, 95% CI 0.05 to 0.99; I 2 = 0%, 2 studies, 214 participants) (low certainty evidence). It was often uncertain whether antiseptics were associated with any difference in healing, infections, or other outcomes. Where there is moderate or high certainty evidence, decision makers need to consider the applicability of the evidence from the comparison to their patients. Reporting was poor, to the extent that we are not confident that most trials are free from risk of bias.

Analysis and optimization of minor actinides transmutation blankets with regards to neutron and gamma sources

NASA Astrophysics Data System (ADS)

Kooymana, Timothée; Buiron, Laurent; Rimpault, Gérald

2017-09-01

Heterogeneous loading of minor actinides in radial blankets is a potential solution to implement minor actinides transmutation in fast reactors. However, to compensate for the lower flux level experienced by the blankets, the fraction of minor actinides to be loaded in the blankets must be increased to maintain acceptable performances. This severely increases the decay heat and neutron source of the blanket assemblies, both before and after irradiation, by more than an order of magnitude in the case of neutron source for instance. We propose here to implement an optimization methodology of the blankets design with regards to various parameters such as the local spectrum or the mass to be loaded, with the objective of minimizing the final neutron source of the spent assembly while maximizing the transmutation performances of the blankets. In a first stage, an analysis of the various contributors to long and short term neutron and gamma source is carried out while in a second stage, relevant estimators are designed for use in the effective optimization process, which is done in the last step. A comparison with core calculations is finally done for completeness and validation purposes. It is found that the use of a moderated spectrum in the blankets can be beneficial in terms of final neutron and gamma source without impacting minor actinides transmutation performances compared to more energetic spectrum that could be achieved using metallic fuel for instance. It is also confirmed that, if possible, the use of hydrides as moderating material in the blankets is a promising option to limit the total minor actinides inventory in the fuel cycle. If not, it appears that focus should be put upon an increased residence time for the blankets rather than an increase in the acceptable neutron source for handling and reprocessing.

Assessment of Residential Biomass Burning During Winter in Las Vegas, Nevada

NASA Astrophysics Data System (ADS)

Brown, S. G.; Lee, T.; Olson, D.; Norris, G.; Roberts, P. T.; Collett, J. L.

2011-12-01

Concentrations of organic matter (OM) and black carbon (BC) were measured at a site in a residential area of Las Vegas, Nevada, and multiple analytical methods were used to determine the amounts attributable to biomass burning. In January 2008, measurements of a wood burning tracer, levoglucosan, were made via gas chromatography-mass spectroscopy (n=17). In addition, an Aerodyne High Resolution Aerosol Mass Spectrometer (HR-AMS) measured OM and C2H4O2+, a levoglucosan-derived fragment. During 2007 and 2008, two-channel Aethalometer data were also collected; the difference between the 370 nm and 880 nm channels (UV-BC difference) was used to indicate the presence of wood smoke. Concentrations of OM, BC, C2H4O2+, and levoglucosan, as well as the UV-BC difference, were all highest during the evening hours (generally between 1800 and 0000 LST). Average OM concentrations were 3.3 μg/m3 during January but were 6.9 μg/m3 during the overnight hours (between 1700 and 0000 LST). Median levoglucosan concentrations were 0.14 μg/m3. The correlation of levoglucosan with C2H4O2+ was very high (r2=0.92). During the evening hours, correlation between BC and C2H4O2+ was good (r2=0.79); however, correlation was poor during other hours (r2<0.40), suggesting that other emissions such as mobile-source emissions were likely the dominant source of BC during those hours. C2H4O2+ showed modest correlation with UV-BC (e.g., r2=0.45). Using EPA's positive matrix factorization tool, EPA PMF, on the January HR-AMS data, we determined that biomass burning organic aerosol (BBOA) constituted 12% of the OM on average, but about 25% of the OM during evening hours. BBOA correlated well with levoglucosan (r2=0.82) and C2H4O2+ (r2=0.93). Levoglucosan measurements suggested that wood burning could constitute 38% of the OM during the overnight periods on average, although this number greatly depends on the assumed ratio of levoglucosan to OM in a source profile for residential biomass burning. The particle size distributions of mass for OM and m/z 60 (which includes other ions but is dominated by C2H4O2+) were quite broad, peaking between 100 nm and 450 nm for m/z 60 and between 200 nm and 450 nm for OM, suggesting relatively fresh aerosol. H/C ratios were highest (typically 1.57) and O/C ratios were lowest (typically 0.25) during evening hours, and the OM/OC ratio was, on average, 1.47, also indicating very fresh aerosol. Using levoglucosan and AMS markers, we can separate residential biomass burning influences from other sources of carbonaceous aerosol in the area.

Design of a model to predict surge capacity bottlenecks for burn mass casualties at a large academic medical center.

PubMed

Abir, Mahshid; Davis, Matthew M; Sankar, Pratap; Wong, Andrew C; Wang, Stewart C

2013-02-01

To design and test a model to predict surge capacity bottlenecks at a large academic medical center in response to a mass-casualty incident (MCI) involving multiple burn victims. Using the simulation software ProModel, a model of patient flow and anticipated resource use, according to principles of disaster management, was developed based upon historical data from the University Hospital of the University of Michigan Health System. Model inputs included: (a) age and weight distribution for casualties, and distribution of size and depth of burns; (b) rate of arrival of casualties to the hospital, and triage to ward or critical care settings; (c) eligibility for early discharge of non-MCI inpatients at time of MCI; (d) baseline occupancy of intensive care unit (ICU), surgical step-down, and ward; (e) staff availability-number of physicians, nurses, and respiratory therapists, and the expected ratio of each group to patients; (f) floor and operating room resources-anticipating the need for mechanical ventilators, burn care and surgical resources, blood products, and intravenous fluids; (g) average hospital length of stay and mortality rate for patients with inhalation injury and different size burns; and (h) average number of times that different size burns undergo surgery. Key model outputs include time to bottleneck for each limiting resource and average waiting time to hospital bed availability. Given base-case model assumptions (including 100 mass casualties with an inter-arrival rate to the hospital of one patient every three minutes), hospital utilization is constrained within the first 120 minutes to 21 casualties, due to the limited number of beds. The first bottleneck is attributable to exhausting critical care beds, followed by floor beds. Given this limitation in number of patients, the temporal order of the ensuing bottlenecks is as follows: Lactated Ringer's solution (4 h), silver sulfadiazine/Silvadene (6 h), albumin (48 h), thrombin topical (72 h), type AB packed red blood cells (76 h), silver dressing/Acticoat (100 h), bismuth tribromophenate/Xeroform (102 h), and gauze bandage rolls/Kerlix (168 h). The following items do not precipitate a bottleneck: ventilators, topical epinephrine, staplers, foams, antimicrobial non-adherent dressing/Telfa types A, B, or O blood. Nurse, respiratory therapist, and physician staffing does not induce bottlenecks. This model, and similar models for non-burn-related MCIs, can serve as a real-time estimation and management tool for hospital capacity in the setting of MCIs, and can inform supply decision support for disaster management.

Nuclear Masses in the A=80 Region of Nuclei

NASA Astrophysics Data System (ADS)

Cuka, N.; Gadala-Maria, A.; Aprahamian, A.

1996-05-01

Nucleosynthesis in explosive hydrogen burning at high temperatures above 8x10^8 K is characterized by the rp-process. A recent study^1 of the reaction flow and their associated time scales showed that the reaction path may in fact proceed well beyond the A=80 region of nuclei. An accurate simulation of the nucleosynthesis and energy generation of this process strongly depends on reliable nuclear physics input parameters such as masses, lifetimes, and reaction rates. We have extended the use of the simple P-parametrization^2,3 that had been applied to the characterization of the structure contributions to the nuclear masses in the actinides to include the A=80 region. The results will be presented along with predictions of masses for presently unknown masses of nuclei along the rp-process path. ^1 R. Wallace and S. Woosley, Ap. J. Suppl. 45, 389 (81). ^2 R. F. Casten, D.S. Brenner and P.E. Haustein, Phys. Rev. Lett. 58, 658 (87). ^3 P. Haustein, D.S. Brenner and R.F. Casten, Phys. Rev. C 38, 467 (88).

Aerosol transport model evaluation of an extreme smoke episode in Southeast Asia

NASA Astrophysics Data System (ADS)

Hyer, Edward J.; Chew, Boon Ning

2010-04-01

Biomass burning is one of many sources of particulate pollution in Southeast Asia, but its irregular spatial and temporal patterns mean that large episodes can cause acute air quality problems in urban areas. Fires in Sumatra and Borneo during September and October 2006 contributed to 24-h mean PM 10 concentrations above 150 μg m -3 at multiple locations in Singapore and Malaysia over several days. We use the FLAMBE model of biomass burning emissions and the NAAPS model of aerosol transport and evolution to simulate these events, and compare our simulation results to 24-h average PM 10 measurements from 54 stations in Singapore and Malaysia. The model simulation, including the FLAMBE smoke source as well as dust, sulfate, and sea salt aerosol species, was able to explain 50% or more of the variance in 24-h PM 10 observations at 29 of 54 sites. Simulation results indicated that biomass burning smoke contributed to nearly all of the extreme PM 10 observations during September-November 2006, but the exact contribution of smoke was unclear because the model severely underestimated total smoke emissions. Using regression analysis at each site, the bias in the smoke aerosol flux was determined to be a factor of between 2.5 and 10, and an overall factor of 3.5 was estimated. After application of this factor, the simulated smoke aerosol concentration averaged 20% of observed PM 10, and 40% of PM 10 for days with 24-h average concentrations above 150 μg m -3. These results suggest that aerosol transport models can aid analysis of severe pollution events in Southeast Asia, but that improvements are needed in models of biomass burning smoke emissions.

Potential sensitivity of photosynthesis and isoprene emission to direct radiative effects of atmospheric aerosol pollution

NASA Astrophysics Data System (ADS)

Strada, Susanna; Unger, Nadine

2016-04-01

A global Earth system model is applied to quantify the impacts of direct anthropogenic aerosol effective radiative forcing on gross primary productivity (GPP) and isoprene emission. The impacts of different pollution aerosol sources (anthropogenic, biomass burning, and non-biomass burning) are investigated by performing sensitivity experiments. The model framework includes all known light and meteorological responses of photosynthesis, but uses fixed canopy structures and phenology. On a global scale, our results show that global land carbon fluxes (GPP and isoprene emission) are not sensitive to pollution aerosols, even under a global decline in surface solar radiation (direct + diffuse) by ˜ 9 %. At a regional scale, GPP and isoprene emission show a robust but opposite sensitivity to pollution aerosols in regions where forested canopies dominate. In eastern North America and Eurasia, anthropogenic pollution aerosols (mainly from non-biomass burning sources) enhance GPP by +5-8 % on an annual average. In the northwestern Amazon Basin and central Africa, biomass burning aerosols increase GPP by +2-5 % on an annual average, with a peak in the northwestern Amazon Basin during the dry-fire season (+5-8 %). The prevailing mechanism varies across regions: light scattering dominates in eastern North America, while a reduction in direct radiation dominates in Europe and China. Aerosol-induced GPP productivity increases in the Amazon and central Africa include an additional positive feedback from reduced canopy temperatures in response to increases in canopy conductance. In Eurasia and northeastern China, anthropogenic pollution aerosols drive a decrease in isoprene emission of -2 to -12 % on an annual average. Future research needs to incorporate the indirect effects of aerosols and possible feedbacks from dynamic carbon allocation and phenology.

The efficacy of playing a virtual reality game in modulating pain for children with acute burn injuries: a randomized controlled trial [ISRCTN87413556].

PubMed

Das, Debashish A; Grimmer, Karen A; Sparnon, Anthony L; McRae, Sarah E; Thomas, Bruce H

2005-03-03

The management of burn injuries is reported as painful, distressing and a cause of anxiety in children and their parents. Child's and parents' pain and anxiety, often contributes to extended time required for burns management procedures, in particular the process of changing dressings. The traditional method of pharmacologic analgesia is often insufficient to cover the burnt child's pain, and it can have deleterious side effects 12. Intervention with Virtual Reality (VR) games is based on distraction or interruption in the way current thoughts, including pain, are processed by the brain. Research on adults supports the hypothesis that virtual reality has a positive influence on burns pain modulation. This study investigates whether playing a virtual reality game, decreases procedural pain in children aged 5-18 years with acute burn injuries. The paper reports on the findings of a pilot study, a randomised trial, in which seven children acted as their own controls though a series of 11 trials. Outcomes were pain measured using the self-report Faces Scale and findings of interviews with parent/carer and nurses. The average pain scores (from the Faces Scale) for pharmacological analgesia only was, 4.1 (SD 2.9), while VR coupled with pharmacological analgesia, the average pain score was 1.3 (SD 1.8) The study provides strong evidence supporting VR based games in providing analgesia with minimal side effects and little impact on the physical hospital environment, as well as its reusability and versatility, suggesting another option in the management of children's acute pain.

Ten Years of Post-Fire Vegetation Recovery following the 2007 Zaca Fire using Landsat Satellite Imagery

NASA Astrophysics Data System (ADS)

Hallett, J. K. E.; Miller, D.; Roberts, D. A.

2017-12-01

Forest fires play a key role in shaping eco-systems. The risk to vegetation depends on the fire regime, fuel conditions (age and amount), fire temperature, and physiological characteristics such as bark thickness and stem diameter. The 2007 Zaca Fire (24 kilometers NE of Buellton, Santa Barbara County, California) burned 826.4 km2 over the course of 2 months. In this study, we used a time series of Landsat 5 Thematic Mapper and Landsat 8 Operational Land Imager imagery, to evaluate plant burn severity and post fire recovery as defined into classes of above average recovery, normal recovery, and below average recovery. We spectrally unmixed the images into green vegetation (GV), non-photosynthetic vegetation (NPV), soil surface (SOIL), and ash with a spectral library developed using Constrained Reference Endmember Selection (CRES). We delineated the fire perimeter using the differenced Normalized Burn Ratio (dNBR) and evaluated changes in this index and the Normalized Difference Vegetation Index through time. The results showed an immediate decline in GV and NPV fractions, with a rise in soil and ash fractions directly following the fire, with a slow recovery in GV fraction and a loss of bare soil cover. The was a sharp increase in the ash fraction following the fire and gradual decrease in the year after. Most areas have recovered as of 2017, with prominent recovery in the center of the burn scar and reduced recovery in areas to the south. These results indicate how post-fire vegetation varies based on initial burn severity and pre-fire GV and NPV fractions.

AWBAT: early clinical experience.

PubMed

Vandenberg, Victoria B

2010-03-15

The purpose of this article is to describe the early clinical experience with AWBAT. Burn patients requiring (1) donor sites or (2) treatment of a superficial burn wound injury were treated. A total of 45 patients with 69 distinct wounds were included. AWBAT-D was evaluated in donor sites and AWBAT-S was evaluated in superficial partial-thickness burns. Days to healing, pain, hematoma/seroma formation, and infection were noted. Ease of application, adherence, transparency, and physical adaptability details were collected. Average period to healing of donor sites treated with AWBAT-D (n=22 patients with n=26 wounds) was 11.2 days, sigma =1.95, with a range of 8-15 days and a median of 11 days. Pain rating at 24 hours was 1.2, sigma =0.43 (n=18) and at 48 hours mean was 1.2, sigma =0.46 (n=15). Average period to healing of superficial burns treated with AWBAT-S (n=15 patients with n=18 wounds) was 8.1 days, sigma =2.48, with a range of 5-13 days and a median of 7 days. Pain rating at 24 hours was 1.5, sigma =0.85 (n=10) and at 48 hours mean was 1.75, sigma =0.89 (n=8). There was zero incidence of hematoma/seroma. No infections were seen. Results indicate that AWBAT was easily applied with good initial adherence. It was noted to be transparent, conformant, and pliable. Early experience demonstrates that AWBAT performs well on donor sites and superficial partial-thickness burns and delivers the desired attributes of a temporary skin substitute including good adherence, infection control, transparency, adapatability, and pain control.

In vivo confirmation of hydration based contrast mechanisms for terahertz medical imaging using MRI

NASA Astrophysics Data System (ADS)

Bajwa, Neha; Sung, Shijun; Garritano, James; Nowroozi, Bryan; Tewari, Priyamvada; Ennis, Daniel B.; Alger, Jeffery; Grundfest, Warren; Taylor, Zachary

2014-09-01

Terahertz (THz) detection has been proposed and applied to a variety of medical imaging applications in view of its unrivaled hydration profiling capabilities. Variations in tissue dielectric function have been demonstrated at THz frequencies to generate high contrast imagery of tissue, however, the source of image contrast remains to be verified using a modality with a comparable sensing scheme. To investigate the primary contrast mechanism, a pilot comparison study was performed in a burn wound rat model, widely known to create detectable gradients in tissue hydration through both injured and surrounding tissue. Parallel T2 weighted multi slice multi echo (T2w MSME) 7T Magnetic Resonance (MR) scans and THz surface reflectance maps were acquired of a full thickness skin burn in a rat model over a 5 hour time period. A comparison of uninjured and injured regions in the full thickness burn demonstrates a 3-fold increase in average T2 relaxation times and a 15% increase in average THz reflectivity, respectively. These results support the sensitivity and specificity of MRI for measuring in vivo burn tissue water content and the use of this modality to verify and understand the hydration sensing capabilities of THz imaging for acute assessments of the onset and evolution of diseases that affect the skin. A starting point for more sophisticated in vivo studies, this preliminary analysis may be used in the future to explore how and to what extent the release of unbound water affects imaging contrast in THz burn sensing.

PuS: Reflectivity

NASA Astrophysics Data System (ADS)

Troć, R.

This document is part of subvolume B6bβ`Actinide Monochalcogenides' of Volume 27 `Magnetic properties of non-metallic inorganic compounds based on transition elements' of Landolt-Börnstein - Group III `Condensed Matter'. The volume presents magnetic and related properties of monochalcogenides based on actinides and their solid solutions.

Liquid-liquid extraction of actinides, lanthanides, and fission products by use of ionic liquids: from discovery to understanding.

PubMed

Billard, Isabelle; Ouadi, Ali; Gaillard, Clotilde

2011-06-01

Liquid-liquid extraction of actinides and lanthanides by use of ionic liquids is reviewed, considering, first, phenomenological aspects, then looking more deeply at the various mechanisms. Future trends in this developing field are presented.

Development of ion beam sputtering techniques for actinide target preparation

NASA Astrophysics Data System (ADS)

Aaron, W. S.; Zevenbergen, L. A.; Adair, H. L.

1985-06-01

Ion beam sputtering is a routine method for the preparation of thin films used as targets because it allows the use of a minimum quantity of starting material, and losses are much lower than most other vacuum deposition techniques. Work is underway in the Isotope Research Materials Laboratory (IRML) at ORNL to develop the techniques that will make the preparation of actinide targets up to 100 μg/cm 2 by ion beam sputtering a routinely available service from IRML. The preparation of the actinide material in a form suitable for sputtering is a key to this technique, as is designing a sputtering system that allows the flexibility required for custom-ordered target production. At present, development work is being conducted on low-activity actinides in a bench-top system. The system will then be installed in a hood or glove box approved for radioactive materials handling where processing of radium, actinium, and plutonium isotopes among others will be performed.

Molecular orbital studies of the bonding in heavy element organometallics: Progress report

NASA Astrophysics Data System (ADS)

Bursten, B. E.

1988-03-01

Over the past two years we have made considerable progress in the understanding of the bonding in heavy element mononuclear and binuclear complexes. For mononuclear complexes, our strategy has been to study the orbital interactions between the actinide metal center and the surrounding ligands. One particular system which has been studied extensively is X sub 3 AnL (where X = Cp, Cl, NH sub 2 ; An = actinide; and L = neutral or anionic ligand). We are interested not only in the mechanics of the An-X orbital interactions, but also how the relative donor characteristics of X may influence coordination of the fourth ligand L to the actinide. For binuclear systems, we are interested not only in homobimetallic complexes, but also in heterobimetallic complexes containing actinides and transition metals. In order to make the calculations of such large systems tractable, we have transferred the X-alpha-SW codes to the newly acquired Cray XMP24 at the Ohio Supercomputer Center. This has resulted in significant savings of money and time.

Emergence of californium as the second transitional element in the actinide series

DOE PAGES

Cary, Samantha K.; Vasiliu, Monica; Baumbach, Ryan E.; ...

2015-04-16

A break in periodicity occurs in the actinide series between plutonium and americium as the result of the localization of 5f electrons. The subsequent chemistry of later actinides is thought to closely parallel lanthanides in that bonding is expected to be ionic and complexation should not substantially alter the electronic structure of the metal ions. Here we demonstrate that ligation of californium(III) by a pyridine derivative results in significant deviations in the properties of the resultant complex with respect to that predicted for the free ion. We expand on this by characterizing the americium and curium analogues for comparison, andmore » show that these pronounced effects result from a second transition in periodicity in the actinide series that occurs, in part, because of the stabilization of the divalent oxidation state. As a result, the metastability of californium(II) is responsible for many of the unusual properties of californium including the green photoluminescence.« less

A unified picture of the crystal structures of metals

NASA Astrophysics Data System (ADS)

Söderlind, Per; Eriksson, Olle; Johansson, Börje; Wills, J. M.; Boring, A. M.

1995-04-01

THE crystal structures of the light actinides have intrigued physicists and chemists for several decades1. Simple metals and transition metals have close-packed, high-symmetry structures, such as body-centred cubic, face-centred cubic and hexagonal close packing. In contrast, the structures of the light actinides are very loosely packed and of low symmetry-tetragonal, orthorhombic and monoclinic. To understand these differences, we have performed total-energy calculations, as a function of volume, for both high-and low-symmetry structures of a simple metal (aluminium), a non-magnetic transition metal (niobium), a ferromagnetic transition metal (iron) and a light actinide (uranium). We find that the crystal structure of all of these metals is determined by the balance between electrostatic (Madelung) interactions, which favour high symmetry, and a Peierls distortion of the crystal lattice, which favours low symmetry. We show that simple metals and transition metals can adopt low-symmetry structures on expansion of the lattice; and we predict that, conversely, the light actinides will undergo transitions to structures of higher symmetry on compression.

Supercritical Fluid Extraction and Separation of Uranium from Other Actinides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donna L. Quach; Bruce J. Mincher; Chien M. Wai

2014-06-01

This paper investigates the feasibility of separating uranium from other actinides by using supercritical fluid carbon dioxide (sc-CO2) as a solvent modified with tri-n-butylphosphate (TBP) for the development of an extraction and counter current stripping technique, which would be a more efficient and environmentally benign technology for used nuclear fuel reprocessing compared to traditional solvent extraction. Several actinides (U(VI), Np(VI), Pu(IV), and Am(III)) were extracted in sc-CO2 modified with TBP over a range of nitric acid concentrations and then the actinides were exposed to reducing and complexing agents to suppress their extractability. According to this study, the separation of uraniummore » from plutonium in sc-CO2 modified with TBP was successful at nitric acid concentrations of less than 3 M in the presence of acetohydroxamic acid or oxalic acid, and the separation of uranium from neptunium was successful at nitric acid concentrations of less than 1 M in the presence of acetohydroxamic acid, oxalic acid, or sodium nitrite.« less

Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

DOEpatents

Windt, N.F.; Williams, J.L.

In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel contianing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

Accelerator-driven transmutation of spent fuel elements

DOEpatents

Venneri, Francesco; Williamson, Mark A.; Li, Ning

2002-01-01

An apparatus and method is described for transmuting higher actinides, plutonium and selected fission products in a liquid-fuel subcritical assembly. Uranium may also be enriched, thereby providing new fuel for use in conventional nuclear power plants. An accelerator provides the additional neutrons required to perform the processes. The size of the accelerator needed to complete fuel cycle closure depends on the neutron efficiency of the supported reactors and on the neutron spectrum of the actinide transmutation apparatus. Treatment of spent fuel from light water reactors (LWRs) using uranium-based fuel will require the largest accelerator power, whereas neutron-efficient high temperature gas reactors (HTGRs) or CANDU reactors will require the smallest accelerator power, especially if thorium is introduced into the newly generated fuel according to the teachings of the present invention. Fast spectrum actinide transmutation apparatus (based on liquid-metal fuel) will take full advantage of the accelerator-produced source neutrons and provide maximum utilization of the actinide-generated fission neutrons. However, near-thermal transmutation apparatus will require lower standing

Actinide and lanthanide separation process (ALSEP)

DOEpatents

Guelis, Artem V.

2013-01-15

The process of the invention is the separation of minor actinides from lanthanides in a fluid mixture comprising, fission products, lanthanides, minor actinides, rare earth elements, nitric acid and water by addition of an organic chelating aid to the fluid; extracting the fluid with a solvent comprising a first extractant, a second extractant and an organic diluent to form an organic extractant stream and an aqueous raffinate. Scrubbing the organic stream with a dicarboxylic acid and a chelating agent to form a scrubber discharge. The scrubber discharge is stripped with a simple buffering agent and a second chelating agent in the pH range of 2.5 to 6.1 to produce actinide and lanthanide streams and spent organic diluents. The first extractant is selected from bis(2-ethylhexyl)hydrogen phosphate (HDEHP) and mono(2-ethylhexyl)2-ethylhexyl phosphonate (HEH(EHP)) and the second extractant is selected from N,N,N,N-tetra-2-ethylhexyl diglycol amide (TEHDGA) and N,N,N',N'-tetraoctyl-3-oxapentanediamide (TODGA).

40 CFR 63.7522 - Can I use emissions averaging to comply with this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (vi) Dutch ovens/pile burners designed to burn biomass/bio-based solid. (vii) Fuel Cells designed to...: Industrial, Commercial, and Institutional Boilers and Process Heaters Testing, Fuel Analyses, and Initial... allowed as follows: (i) You may average among units in any of the solid fuel subcategories. (ii) You may...

Increased dry season water yield in burned watersheds in Southern California

NASA Astrophysics Data System (ADS)

Kinoshita, Alicia M.; Hogue, Terri S.

2015-01-01

The current work evaluates the effects of the 2003 Old Fire on semi-arid systems in the San Bernardino Mountains, California. Pre- and post-fire daily streamflow are used to analyze flow regimes in two burned watersheds. The average pre-fire runoff ratios in Devil Canyon and City Creek are 0.14 and 0.26, respectively, and both increase to 0.34 post-fire. Annual flow duration curves are developed for each watershed and the low flow is characterized by a 90% exceedance probability threshold. Post-fire low flow is statistically different from the pre-fire values (α = 0.05). In Devil Canyon the annual volume of pre-fire low flow increases on average from 2.6E + 02 to 3.1E + 03 m3 (1090% increase) and in City Creek the annual low flow volume increases from 2.3E + 03 to 5.0E + 03 m3 (118% increase). Predicting burn system resilience to disturbance (anthropogenic and natural) has significant implications for water sustainability and ultimately may provide an opportunity to utilize extended and increased water yield.

Centrifugal Tensioned Metastable Fluid Detectors for Trace Radiation Sources: Experimental Verification and Military Employment

DTIC Science & Technology

2016-06-01

used in both CTMFD and Beckman LS 6500 Scintillation System. Actinide   Mass  of  Nalgene  (g)  Mass  of  Cap (g)  Mass  of  Nalgene,  Cap, 50 mL...both CTMFD and Beckman LS 6500 Scintillation System. Actinide   Mass  of  Nalgene  and Cap  (g)  Mass  of  Nalgene, Cap,  50 mL Acetone  (g)  Mass  of...testing comparing the CTMFD’s capabilities of actinide spectroscopy and neutron detection against other detection systems with similar capabilities. The

Vaporisation of candidate nuclear fuels and targets for transmutation of minor actinides

NASA Astrophysics Data System (ADS)

Gotcu-Freis, P.; Hiernaut, J.-P.; Colle, J.-Y.; Nästrén, C.; Carretero, A. Fernandez; Konings, R. J. M.

2011-04-01

The thermal stability and high temperature behaviour of candidate fuels and targets for transmutation of minor actinides has been investigated. Zirconia-based solid solution, MgO-based CERCER and molybdenum-based CERMET fuels containing Am and/or Pu in various concentrations were heated up to 2700 K in a Knudsen cell coupled with a quadrupole mass spectrometer, to measure their vapour pressure and vapour composition. The results reveal that the vaporisation of the actinides from the samples is not only determined by the thermodynamics of the system but is also related to the dynamic evolution of multi-component mixtures with complex composition or microstructure.

Method for reprocessing and separating spent nuclear fuels. [Patent application

DOEpatents

Krikorian, O.H.; Grens, J.Z.; Parrish, W.H. Sr.

1982-01-19

Spent nuclear fuels, including actinide fuels, volatile and nonvolatile fission products, are reprocessed and separated in a molten metal solvent housed in a separation vessel made of a carbon-containing material. A first catalyst, which promotes the solubility and permeability of carbon in the metal solvent, is included. By increasing the solubility and permeability of the carbon in the solvent, the rate at which actinide oxides are reduced (carbothermic reduction) is greatly increased. A second catalyst, included to increase the affinity for nitrogen in the metal solvent, is added to increase the rate at which actinide nitrides form after carbothermic reduction is complete.

Cryogenic gamma detectors enable direct detection of 236U and minor actinides for non-destructive assay [Cryogenic gamma detectors enable direct detection of minor actinides for non-destructive assay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Velazquez, Miguel; Dreyer, Jonathan; Drury, Owen B.

2015-09-05

Here, we demonstrate the utility of a superconducting transition edge sensor (TES) γ-ray detector with high energy resolution and low Compton background for non-destructive assay (NDA) of a uranium sample from reprocessed nuclear fuel. We show that TES γ-detectors can separate low energy actinide γ-emissions from the background and nearby lines, even from minor isotopes whose signals are often obscured in NDA with conventional Ge detectors. Superconducting γ detectors may therefore bridge the gap between high-accuracy destructive assay (DA) and easier to-use NDA.

Evaluating an outreach service for paediatric burns follow up.

PubMed

Cubitt, Jonathan J; Chesney, Amy; Brown, Liz; Nguyen, Dai Q

2015-09-01

Complications following paediatric burns are well documented and care needs to be taken to ensure the appropriate follow up of these patients. Historically this has meant follow up into adulthood however this is often not necessary. The centralisation of burns services in the UK means that patients and their parents may have to travel significant distances to receive this follow up care. To optimise our burns service we have introduced a burns outreach service to enable the patients to be treated closer to home. The aim of this study is to investigate the impact of the introduction of the burns outreach service and within this environment define the optimum length of time needed to follow up these patients. A retrospective analysis was carried out of 100 consecutive paediatric burns patients who underwent surgical management of their burn. During the follow up period there were 43 complications in 32 patients (32%). These included adverse scarring (either hypertrophic or keloid), delayed healing (taking >1 month to heal) and contractures (utilising either splinting or surgical correction). Fifty-nine percent of these complications occurred within 6 months of injury and all occurred within 18 months. Size of burn was directly correlated to the risk of developing a complication. The outreach service reduced the distance the patient needs to travel for follow up by more than 50%. There was also a significant financial benefit for the service as the follow up clinics were on average 50% cheaper with burns outreach than burns physician. Burns outreach is a feasible service that not only benefits the patients but also is cheaper for the burns service. The optimum length of follow up for paediatric burns in 18 months, after which if there have not been any complications they can be discharged. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Wound management and outcome of 595 electrical burns in a major burn center.

PubMed

Li, Haisheng; Tan, Jianglin; Zhou, Junyi; Yuan, Zhiqiang; Zhang, Jiaping; Peng, Yizhi; Wu, Jun; Luo, Gaoxing

2017-06-15

Electrical burns are important causes of trauma worldwide. This study aims to analyze the clinical characteristics, wound management, and outcome of electric burns. This retrospective study was performed at the Institute of Burn Research of the Third Military Medical University during 2013-2015. Data including the demographics, injury patterns, wound treatment, and outcomes were collected and analyzed. A total of 595 electrical burn patients (93.8% males) were included. The average age was 37.3 ± 14.6 y, and most patients (73.5%) were aged 19∼50 years. Most patients (67.2%) were injured in work-related circumstances. The mean total body surface area was 8.8 ± 11.8% and most wounds (63.5%) were full-thickness burns. Operation times of high-voltage burns and current burns were higher than those of low-voltage burns and arc burns, respectively. Of the 375 operated patients, 83.2% (n = 312) underwent skin autografting and 49.3% (n = 185) required skin flap coverage. Common types of skin flaps were adjacent (50.3%), random (42.2%), and pedicle (35.7%). Amputation was performed in 107 cases (18.0%) and concentrated on the hands (43.9%) and upper limbs (39.3%). The mean length of stay was 42.9 ± 46.3 d and only one death occurred (0.2%). Current burns and higher numbers of operations were major risk factors for amputation and length of stay, respectively. Electrical burns mainly affected adult males with occupational exposures in China. Skin autografts and various skin flaps were commonly used for electric burn wound management. More standardized and effective strategies of treatment and prevention are still needed to decrease amputation rates. Copyright © 2017 Elsevier Inc. All rights reserved.

Total N exports from once vs. repeatedly burnt Pine plantations

NASA Astrophysics Data System (ADS)

Gonzalez Pelayo, Oscar; Hosseini, Mohammadreza; Varandas, Daniela; Machado, Ana Isabel; Prats Alegre, Sergio; Coelho, Celeste O. A.; Geissen, Violette; Ritsema, Coen; Keizer, Jan Jacob

2014-05-01

Post-fire nutrient losses in Mediterranean forested areas have been suggested as a key driver for ecosystem degradation. The role of fire recurrence in soil nutrient depletion, however, has been poorly studied. The EU-funded CASCADE project addresses this research gap in the study case in Portugal, having as overarching aim to assess if repeated wildfires lead to land degradation in Maritime Pine stands through a gradual process or, instead, through tipping-points in plant-water-soil relationships. Following a large wildfire in September 2012 affecting more than 3000 ha in the municipality of Viseu (central Portugal), total N losses are being monitored in three zones: 4x burnt since 1975; 1x burnt since 197, i.e. in 2012); unburnt since 1975. Within each zone, three replicate slopes were selected with similar slope angles and expositions and, at each slope, three pairs of erosion plots of approximately 0.25 m2 were installed on the lower, middle and lower slope section. Additionally, a catchment outlet within the 4x burned zones was equipped with a gauging station for automatic recording of water level sensor and tubidity and for collecting stream flow samples using an automatic sampler. Preliminary results from the first 6 months after the 2012-wildfire suggested that total N losses were, on average, twice as high at the 4x times burned slopes than at the 1x burned slopes. Nonetheless, temporal patterns in average losses during these initial six months were similar for the two zones. By contrast, the results obtained during the subsequent spring and summer seasons suggested that average total N losses from the 1x burned slopes closely approximated those from the 4x burned slopes. At the unburned slopes, total N losses were very small and limited to few rainfall events. Interestingly, at the catchment outlet the total N values were 66% higher compared to the 4x times burned microplots, highlighting the importance of up-scaling effects in terms of nutrient losses. Preliminary results on total N losses during the first post-fire year showed that nutrient depletion can be triggered by increasing the fire regime. The up-scaling effect suggested an increase in nutrient exportations from micro-plot to catchment scale. These results are being further investigated to establish the relationships between soil fertility losses and fire recurrence.

Thermal protective uniforms and hoods: impact of design modifications and water content on burn prevention in New York City firefighters: laboratory and field results

PubMed Central

Prezant, D; Malley, K; Barker, R; Guerth, C; Kelly, K

2001-01-01

Objectives—To determine (1) the effectiveness of hoods in reducing head burns, (2) the impact of clothes worn under the protective outer uniform (modern = long sleeve shirt and long pants; modified modern = short sleeve T-shirt and short pants) on burns, and (3) whether water content (dry, damp or saturated) affects the level of thermal protection. Setting—Fire Department of the City of New York (FDNY). Methods—Laboratory tests (fully dressed manikin) evaluated the different uniform and water conditions when exposed to an average 24 cal/cm2 heat flux, approximately 2250°F air temperature. FDNY field results compared (1) head burns during winters wearing the hood to winters without hood and (2) upper and lower extremity burns during summers wearing traditional, modern, and modified modern uniforms. Results—Laboratory tests showed that thermal protection was: (1) dramatically improved by the hood with protection increasing as water content increased and (2) not significantly different between modern and modified modern uniforms, regardless of water content. FDNY field results confirmed these tests showing (1) significant decreases in neck burns (by 54%), ear burns (by 60%), and head burn totals (by 46%) wearing the hood and (2) no significant differences in upper or lower extremity burns wearing modern compared with modified modern uniforms. Conclusions—Based on combined laboratory and field results, we strongly recommend the use of modern thermal protective hoods and the modified modern uniform. PMID:11565971

Inorganic markers, carbonaceous components and stable carbon isotope from biomass burning aerosols in Northeast China.

PubMed

Cao, Fang; Zhang, Shi-Chun; Kawamura, Kimitaka; Zhang, Yan-Lin

2016-12-01

To better characterize the chemical compositions and sources of fine particulate matter (i.e. PM 2.5 ) in Sanjiang Plain, Northeast China, total carbon (TC), organic carbon (OC), elemental carbon (EC), water-soluble organic carbon (WSOC), and inorganic ions as well as stable carbon isotopic composition (δ 13 C) were measured in this study. Intensively open biomass burning episodes are identified from late September to early October by satellite fire and aerosol optical depth maps. During the biomass-burning episode, concentrations of PM 2.5 , OC, EC, and WSOC are increased by a factor of 4-12 compared to those during the non-biomass-burning period. Non-sea-salt potassium is strongly correlated with PM 2.5 , OC, EC and WSOC, demonstrating an important contribution from biomass-burning emissions. The enrichment in both the non-sea-salt potassium and chlorine is significantly larger than other inorganic species, suggesting that biomass-burning aerosols in Sanjiang Plain are mostly fresh and less aged. In addition, the WSOC-to-OC ratio is lower than that reported in biomass-burning aerosols in tropical regions, further supporting that biomass-burning aerosols in Sanjiang Plain are mostly primary and secondary organic aerosols may be not significant. A lower average δ 13 C value (-26.2‰) is observed during the biomass-burning period, indicating a dominant contribution from combustion of C3 plants in the studied region. Copyright © 2015. Published by Elsevier B.V.

Reexamining the heavy-ion reactions 238U+238U and 238U+248Cm and actinide production close to the barrier

NASA Astrophysics Data System (ADS)

Kratz, J. V.; Schädel, M.; Gäggeler, H. W.

2013-11-01

Recent theoretical work has renewed interest in radiochemically determined isotope distributions in reactions of 238U projectiles with heavy targets that had previously been published only in parts. These data are being reexamined. The cross sections σ(Z) below the uranium target have been determined as a function of incident energy in thick-target bombardments. These are compared to predictions by a diffusion model whereby consistency with the experimental data is found in the energy intervals 7.65-8.30 MeV/u and 6.06-7.50 MeV/u. In the energy interval 6.06-6.49 MeV/u, the experimental data are lower by a factor of 5 compared to the diffusion model prediction indicating a threshold behavior for massive charge and mass transfer close to the barrier. For the intermediate energy interval, the missing mass between the primary fragment masses deduced from the generalized Qgg systematics including neutron pair-breaking corrections and the centroid of the experimental isotope distributions as a function of Z have been used to determine the average excitation energy as a function of Z. From this, the Z dependence of the average total kinetic-energy loss (TKEL¯) has been determined. This is compared to that measured in a thin-target counter experiment at 7.42 MeV/u. For small charge transfers, the values of TKEL¯ of this work are typically about 30 MeV lower than in the thin-target experiment. This difference is decreasing with increasing charge transfer developing into even slightly larger values in the thick-target experiment for the largest charge transfers. This is the expected behavior which is also found in a comparison of the partial cross sections for quasielastic and deep-inelastic reactions in both experiments. The cross sections for surviving heavy actinides, e.g., 98Cf, 99Es, and 100Fm indicate that these are produced in the low-energy tails of the dissipated energy distributions, however, with a low-energy cutoff at about 35 MeV. Excitation functions show that identical isotope distributions are populated independent of the bombarding energy indicating that the same bins of excitation energy are responsible for the production of these fissile isotopes. A comparison of the survival probabilities of the residues of equal charge and neutron transfers in the reactions of 238U projectiles with either 238U or 248Cm targets is consistent with such a cutoff as evaporation calculations assign the surviving heavy actinides to the 3n and/or 4n evaporation channels.

Burden of burns in Portugal, 2000-2013: A clinical and economic analysis of 26,447 hospitalisations.

PubMed

Santos, João V; Oliveira, Andreia; Costa-Pereira, Altamiro; Amarante, José; Freitas, Alberto

2016-06-01

There is a lack of recent and nation-wide epidemiological studies of burns in Europe, mainly in southern Europe. There are no recent studies describing the clinical and economic burden of burns in this European area. Hence, this research aimed to describe the clinical and economic burden of burn hospitalisations in Portugal. A retrospective observational study was performed and the Portuguese hospitalisation database of public hospitals was used; all inpatients, discharged between 2000 and 2013, with a main or secondary diagnosis of burns (ICD-9-CM: 940.xx-949.xx) were taken into account. Furthermore, admissions to hospitals with and without burn centres were compared. A total of 26,447 burn hospitalisations were registered (mean of 1889burn admissions/year). The total hospitalisation rate was of 18.9hospitalisations/100,000inhabitants/year, and there was a higher incidence of male patients. Burn hospitalisations and hospitalisation rates are significantly decreasing - mostly in 0-14-year-old patients - and children below the age of 5 years represented a fifth of all admissions. Besides the important morbidity, the in-hospital mortality rate was of 4.4%. With a total annual charge of almost 13million Euros, the average cost per burn admission is increasing, and reached 8032Euros in 2013. Additionally, more than half of the patients admitted to hospitals without burn centres were not transferred to hospitals with burn centres, not following the European Burns Association transferral criteria. As the largest southern European nation-wide epidemiological study of burn patients, this research highlights that burn admissions, as well as hospitalisation rates, are decreasing significantly. This was particularly obvious among the youngest patients despite the fact that the numbers still remain very high. Moreover, the in-hospital mortality rate is still excessively high and the burn transferral criteria are not being followed. Thus, it is important to improve preventive measures, reach out to and educate providers about the burn transferral criteria, and develop specific health care strategies for children with these injuries. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

PuS: Thermoelectric Power

NASA Astrophysics Data System (ADS)

Troć, R.

This document is part of subvolume B6bβ`Actinide Monochalcogenides' of Volume 27 `Magnetic properties of non-metallic inorganic compounds based on transition elements' of Landolt-Börnstein - Group III `Condensed Matter'. The volume presents magnetic and related properties of monochalcogenides based on actinides and their solid solutions.

Instant hot noodles: do they need to burn?

PubMed

Wu, C; Tan, A L; Maze, D A E; Holland, A J A

2013-03-01

Scalds and contact burns in children may occur as the result of spillage of hot food and drinks, including instant hot noodles. This study sought to determine the frequency of noodle burns in children and investigate the thermal properties of instant hot noodles. Data on instant hot noodle burns in children were retrieved from the New South Wales Severe Burn Injury Database between 2005 and 2010. Five widely available brands of instant hot noodles, including three cup and two packet varieties, were prepared following the manufacturer's instructions. For each preparation the initial temperature after cooking was recorded, together with the time to cool to 50°C. 291 children sustained instant hot noodle burns over the 6 year study period, representing 5.4% of all children referred to our burns unit. Over a third received inadequate first aid. Cup noodles cooked with boiling water reached the highest temperature of over 80°C and took the longest time to cool to 50°C: on average 52.3 min. Cup noodles in smaller, narrower containers achieved higher post-cooking temperatures compared to noodles in wider, bowel shaped containers. Packet noodles cooked in a Microwave oven attained lower peak temperatures and shorter cooling times compared to cup noodles. Although relatively uncommon in children, instant hot noodle burns often received inadequate first aid. When cooked according to manufacturer's instructions, noodles generally exceeded temperatures sufficient to cause a burn. Consumers and parents need to be aware of the risks of burn when preparing these foods. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Acute hand burns in children: management and long-term outcome based on a 10-year experience with 698 injured hands.

PubMed Central

Sheridan, R L; Baryza, M J; Pessina, M A; O'Neill, K M; Cipullo, H M; Donelan, M B; Ryan, C M; Schulz, J T; Schnitzer, J J; Tompkins, R G

1999-01-01

OBJECTIVE: To document long-term results associated with an coordinated plan of care for acutely burned hands in children. SUMMARY AND BACKGROUND DATA: Optimal hand function is a crucial component of a high-quality survival after burn injury. This can be achieved only with a coordinated approach to the injuries. Long-term outcomes associated with such a plan of care have not been previously reported. METHODS: Over a 10-year period, 495 children with 698 acutely burned hands were managed at a regional pediatric burn facility; 219 children with 395 injured hands were followed in the authors' outpatient clinic for at least 1 year and an average of >5 years. The authors' approach to the acutely burned hand emphasizes ranging and splinting throughout the hospital stay, prompt sheet autograft wound closure as soon as practical, and the selective use of axial pin fixation and flaps. Long-term follow-up, hand therapy, and reconstructive surgery are emphasized. RESULTS: Normal functional results were seen in 97% of second-degree and 85% of third-degree injuries; in children with burns involving underlying tendon and bone, 70% could perform activities of daily living and 20% had normal function. Reconstructive hand surgery was required in 4.4% of second-degree burns, 32% of third-degree burns, and 65% of those with injuries involving underlying bone and tendon. CONCLUSIONS: When managed in a coordinated long-term program, the large majority of children with serious hand burns can be expected to have excellent functional results. Images Figure 1. Figure 2. PMID:10203090

Interactive effects of acupuncture on pain and distress in major burns: An experiment with rats.

PubMed

Abali, Ayse Ebru; Cabioglu, Tugrul; Ozdemir, Handan; Haberal, Mehmet

2015-06-01

This study sought to investigate the interactive effects of acupuncture on pain and distress and the local progress in the burn wound in an experimental major burn model. Forty-eight male Sprague-Dawley rats were divided into six groups: S group (sham/observation during 7 days after injury); SA group (sham/acupuncture/observation during 7 days after injury); B1 group (burns/observation during 1h after injury); BA1 group (burns/acupuncture/observation during 1 h after injury); B7 group (burns/observation during 7 days after injury); and BA7 group (burns/acupuncture/observation during 7 days after injury). Pain and distress scores were evaluated throughout the study. The amounts of neutrophils and mononuclear cells were evaluated semiquantitatively, and the number of microvessels was evaluated quantitatively. Our data indicated that the average pain score of BA7 group was significantly lower than the other study groups. Histopathologic investigations indicate that the amounts of neutrophil and mononuclear cell and numbers of microvessels in the unburned skin were higher in acupuncture-applied groups. The number of microvessels in burn wounds of BA7 group was significantly higher than that of the other groups. Our data suggest that acupuncture provides low pain and distress scores in experimental rat model, and it contributes to wound healing with an enhanced angiogenesis during the acute phase of burns. Future clinical and experimental studies should be conducted to discern the benefits from acupuncture in pain management of burn patients. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Hot soup! Correlating the severity of liquid scald burns to fluid and biomedical properties.

PubMed

Loller, Cameron; Buxton, Gavin A; Kerzmann, Tony L

2016-05-01

Burns caused by hot drinks and soups can be both debilitating and costly, especially to pediatric and geriatric patients. This research is aimed at better understanding the fluid properties that can influence the severity of skin burns. We use a standard model which combines heat transfer and biomedical equations to predict burn severity. In particular, experimental data from a physical model serves as the input to our numerical model to determine the severity of scald burns as a consequence of actual fluid flows. This technique enables us to numerically predict the heat transfer from the hot soup into the skin, without the need to numerically estimate the complex fluid mechanics and thermodynamics of the potentially highly viscous and heterogeneous soup. While the temperature of the soup is obviously is the most important fact in determining the degree of burn, we also find that more viscous fluids result in more severe burns, as the slower flowing thicker fluids remain in contact with the skin for longer. Furthermore, other factors can also increase the severity of burn such as a higher initial fluid temperature, a greater fluid thermal conductivity, or a higher thermal capacity of the fluid. Our combined experimental and numerical investigation finds that for average skin properties a very viscous fluid at 100°C, the fluid must be in contact with the skin for around 15-20s to cause second degree burns, and more than 80s to cause a third degree burn. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Evaluation of possible physical-chemical processes that might lead to separations of actinides in ORNL waste tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Cul, G.D.; Toth, L.M.; Bond, W.D.

The concern that there might be some physical-chemical process which would lead to a separation of the poisoning actinides ({sup 232}Th, {sup 238}U) from the fissionable ones ({sup 239}Pu, {sup 235}U) in waste storage tanks at Oak Ridge National Laboratory has led to a paper study of potential separations processes involving these elements. At the relatively high pH values (>8), the actinides are normally present as precipitated hydroxides. Mechanisms that might then selectively dissolve and reprecipitate the actinides through thermal processes or additions of reagents were addressed. Although redox reactions, pH changes, and complexation reactions were all considered, only themore » last type was regarded as having any significant probability. Furthermore, only carbonate accumulation, through continual unmonitored air sparging of the tank contents, could credibly account for gross transport and separation of the actinide components. From the large amount of equilibrium data in the literature, concentration differences in Th, U, and Pu due to carbonate complexation as a function of pH have been presented to demonstrate this phenomenon. While the carbonate effect does represent a potential separations process, control of long-term air sparging and solution pH, accompanied by routine determinations of soluble carbonate concentration, should ensure that this separations process does not occur.« less

Decay heat power of spent nuclear fuel of power reactors with high burnup at long-term storage

NASA Astrophysics Data System (ADS)

Ternovykh, Mikhail; Tikhomirov, Georgy; Saldikov, Ivan; Gerasimov, Alexander

2017-09-01

Decay heat power of actinides and fission products from spent nuclear fuel of power VVER-1000 type reactors at long-term storage is calculated. Two modes of storage are considered: mode in which single portion of actinides or fission products is loaded in storage facility, and mode in which actinides or fission products from spent fuel of one VVER reactor are added every year in storage facility during 30 years and then accumulated nuclides are stored without addition new nuclides. Two values of fuel burnup 40 and 70 MW·d/kg are considered for the mode of storage of single fuel unloading. For the mode of accumulation of spent fuel with subsequent storage, one value of burnup of 70 MW·d/kg is considered. Very long time of storage 105 years accepted in calculations allows to simulate final geological disposal of radioactive wastes. Heat power of fission products decreases quickly after 50-100 years of storage. The power of actinides decreases very slow. In passing from 40 to 70 MW·d/kg, power of actinides increases due to accumulation of higher fraction of 244Cm. These data are important in the back end of fuel cycle when improved cooling system of the storage facility will be required along with stronger radiation protection during storage, transportation and processing.

Study of extraterrestrial disposal of radioactive wastes. Part 3: Preliminary feasibility screening study of space disposal of the actinide radioactive wastes with 1 percent and 0.1 percent fission product contamination

NASA Technical Reports Server (NTRS)

Hyland, R. E.; Wohl, M. L.; Finnegan, P. M.

1973-01-01

A preliminary study was conducted of the feasibility of space disposal of the actinide class of radioactive waste material. This waste was assumed to contain 1 and 0.1 percent residual fission products, since it may not be feasible to completely separate the actinides. The actinides are a small fraction of the total waste but they remain radioactive much longer than the other wastes and must be isolated from human encounter for tens of thousands of years. Results indicate that space disposal is promising but more study is required, particularly in the area of safety. The minimum cost of space transportation would increase the consumer electric utility bill by the order of 1 percent for earth escape and 3 percent for solar escape. The waste package in this phase of the study was designed for normal operating conditions only; the design of next phase of the study will include provisions for accident safety. The number of shuttle launches per year required to dispose of all U.S. generated actinide waste with 0.1 percent residual fission products varies between 3 and 15 in 1985 and between 25 and 110 by 2000. The lower values assume earth escape (solar orbit) and the higher values are for escape from the solar system.

Contribution of incense burning to indoor PM10 and particle-bound polycyclic aromatic hydrocarbons under two ventilation conditions.

PubMed

Lung, S-C C; Kao, M-C; Hu, S-C

2003-06-01

Burning incense to worship Gods and ancestors is a traditional practice prevalent in Asian societies. This work investigated indoor PM10 concentrations resulting from incense burning in household environments under two conditions: closed and ventilated. The exposure concentrations of particle-bound polycyclic aromatic hydrocarbons (PAHs) were estimated. The factors of potential exposure were also evaluated. Under both conditions, samples were taken at three locations: 0.3, 3.5 and 7 m away from the altar during three periods: incense burning, the first 3 h, and the 4-6 h after cessation of combustion. PAH concentrations of incense smoke were assessed in the laboratory. Personal environment monitors were used as sampling instruments. The results showed a significant contribution of incense burning to indoor PM10 and particulate PAH concentrations. PM10 concentrations near the altar during incense burning were 723 and 178 microg/m3, more than nine and 1.6 times background levels, under closed and ventilated conditions, respectively. Exposure concentrations of particle-bound PAHs were 0.088-0.45 microg/m3 during incense burning. On average, PM10 and associated PAH concentrations were about 371 and 0.23 microg/m3 lower, respectively, in ventilated environments compared with closed conditions. Concentrations were elevated for at least 6 h under closed conditions.

Characterization of PM 2.5 collected during broadcast and slash-pile prescribed burns of predominately ponderosa pine forests in northern Arizona

NASA Astrophysics Data System (ADS)

Robinson, Marin S.; Zhao, Min; Zack, Lindsay; Brindley, Christine; Portz, Lillian; Quarterman, Matthew; Long, Xiufen; Herckes, Pierre

2011-04-01

Prescribed burning, in combination with mechanical thinning, is a successful method for reducing heavy fuel loads from forest floors and thereby lowering the risk of catastrophic wildfire. However, an undesirable consequence of managed fire is the production of fine particulate matter or PM 2.5 (particles ≤2.5 μm in aerodynamic diameter). Wood-smoke particulate data from 21 prescribed burns are described, including results from broadcast and slash-pile burns. All PM 2.5 samples were collected in situ on day 1 (ignition) or day 2. Samples were analyzed for mass, polycyclic aromatic hydrocarbons (PAHs), inorganic elements, organic carbon (OC), and elemental carbon (EC). Results were characteristic of low-intensity, smoldering fires. PM 2.5 concentrations varied from 523 to 8357 μg m -3 and were higher on day 1. PAH weight percents (19 PAHs) were higher in slash-pile burns (0.21 ± 0.08% OC) than broadcast burns (0.07 ± 0.03% OC). The major elements were K, Cl, S, and Si. OC and EC values averaged 66 ± 7 and 2.8 ± 1.4% PM 2.5, respectively, for all burns studied, in good agreement with literature values for smoldering fires.

Characterization of PM(2.5) collected during broadcast and slash-pile prescribed burns of predominately ponderosa pine forests in northern Arizona.

PubMed

Robinson, Marin S; Zhao, Min; Zack, Lindsay; Brindley, Christine; Portz, Lillian; Quarterman, Matthew; Long, Xiufen; Herckes, Pierre

2011-04-01

Prescribed burning, in combination with mechanical thinning, is a successful method for reducing heavy fuel loads from forest floors and thereby lowering the risk of catastrophic wildfire. However, an undesirable consequence of managed fire is the production of fine particulate matter or PM(2.5) (particles ≤2.5 µm in aerodynamic diameter). Wood-smoke particulate data from 21 prescribed burns are described, including results from broadcast and slash-pile burns. All PM(2.5) samples were collected in situ on day 1 (ignition) or day 2. Samples were analyzed for mass, polycyclic aromatic hydrocarbons (PAHs), inorganic elements, organic carbon (OC), and elemental carbon (EC). Results were characteristic of low intensity, smoldering fires. PM(2.5) concentrations varied from 523 to 8357 µg m(-3) and were higher on day 1. PAH weight percents (19 PAHs) were higher in slash-pile burns (0.21 ± 0.08% OC) than broadcast burns (0.07 ± 0.03% OC). The major elements were K, Cl, S, and Si. OC and EC values averaged 66 ± 7 and 2.8 ± 1.4% PM(2.5), respectively, for all burns studied, in good agreement with literature values for smoldering fires.

Rigorous, robust and systematic: Qualitative research and its contribution to burn care. An integrative review.

PubMed

Kornhaber, Rachel Anne; de Jong, A E E; McLean, L

2015-12-01

Qualitative methods are progressively being implemented by researchers for exploration within healthcare. However, there has been a longstanding and wide-ranging debate concerning the relative merits of qualitative research within the health care literature. This integrative review aimed to exam the contribution of qualitative research in burns care and subsequent rehabilitation. Studies were identified using an electronic search strategy using the databases PubMed, Cumulative Index of Nursing and Allied Health Literature (CINAHL), Excerpta Medica database (EMBASE) and Scopus of peer reviewed primary research in English between 2009 to April 2014 using Whittemore and Knafl's integrative review method as a guide for analysis. From the 298 papers identified, 26 research papers met the inclusion criteria. Across all studies there was an average of 22 participants involved in each study with a range of 6-53 participants conducted across 12 nations that focussed on burns prevention, paediatric burns, appropriate acquisition and delivery of burns care, pain and psychosocial implications of burns trauma. Careful and rigorous application of qualitative methodologies promotes and enriches the development of burns knowledge. In particular, the key elements in qualitative methodological process and its publication are critical in disseminating credible and methodologically sound qualitative research. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

From Cholera to Burns: A Role for Oral Rehydration Therapy

PubMed Central

Green, W.B.; Asuku, M.E.; Feldman, M.; Makam, R.; Noppenberger, D.; Price, L.A.; Prosciak, M.; van Loon, I.N.

2011-01-01

According to the practice guidelines of the American Burn Association on burn shock resuscitation, intravenous (IV) fluid therapy is the standard of care for the replacement of fluid and electrolyte losses in burn injury of ≥20% of the total body surface area. However, in mass burn casualties, IV fluid resuscitation may be delayed or unavailable. Oral rehydration therapy (ORT), which has been shown to be highly effective in the treatment of dehydration in epidemics of cholera, could be an alternate way to replace fluid losses in burns. A prospective case series of three patients was carried out as an initial step to establish whether oral Ceralyte®90 could replace fluid losses requiring IV fluid therapy in thermal injury. The requirement of the continuing IV fluid therapy was reduced by an average of 58% in the first 24 hours after the injury (range 37-78%). ORT may be a feasible alternative to IV fluid therapy in the resuscitation of burns. It could also potentially save many lives in mass casualty situations or in resource-poor settings where IV fluid therapy is not immediately available. Further studies are needed to assess the efficacy of this treatment and to determine whether the present formulations of ORT for cholera need modification. PMID:22283039

Characterization of PM2.5 collected during broadcast and slash-pile prescribed burns of predominately ponderosa pine forests in northern Arizona

PubMed Central

Zhao, Min; Zack, Lindsay; Brindley, Christine; Portz, Lillian; Quarterman, Matthew; Long, Xiufen; Herckes, Pierre

2011-01-01

Prescribed burning, in combination with mechanical thinning, is a successful method for reducing heavy fuel loads from forest floors and thereby lowering the risk of catastrophic wildfire. However, an undesirable consequence of managed fire is the production of fine particulate matter or PM2.5 (particles ≤2.5 µm in aerodynamic diameter). Wood-smoke particulate data from 21 prescribed burns are described, including results from broadcast and slash-pile burns. All PM2.5 samples were collected in situ on day 1 (ignition) or day 2. Samples were analyzed for mass, polycyclic aromatic hydrocarbons (PAHs), inorganic elements, organic carbon (OC), and elemental carbon (EC). Results were characteristic of low intensity, smoldering fires. PM2.5 concentrations varied from 523 to 8357 µg m−3 and were higher on day 1. PAH weight percents (19 PAHs) were higher in slash-pile burns (0.21 ± 0.08% OC) than broadcast burns (0.07 ± 0.03% OC). The major elements were K, Cl, S, and Si. OC and EC values averaged 66 ± 7 and 2.8 ± 1.4% PM2.5, respectively, for all burns studied, in good agreement with literature values for smoldering fires. PMID:21625396

High voltage electrical injuries.

PubMed

Kaloudová, Y; Sín, R; Rihová, H; Brychta, R; Suchánek, I; Martincová, A

2006-01-01

Between 1999 and 2005, a total of 41 patients were hospitalized at the Burn Centre of Brno University Hospital with high voltage electrical injuries, representing 6.06% of the total number of patients treated at the Burn Intensive Care Unit (ICU) for extensive burn trauma. The average age of patients with serious electrotraumas was 27.29 years. The youngest patient was 9 years old, the oldest 64 years. Lethality amounted to 17.07% of the total number of patients. The article clearly shows the sinister dimension (a frighteningly high number of cases) of high voltage electrical injuries suffered outside work context in the vicinity of railway tracks and affecting in particular the youngest age groups--children.

The effect of pre-existing malnutrition on pediatric burn mortality in a sub-Saharan African burn unit.

PubMed

Grudziak, Joanna; Snock, Carolyn; Mjuweni, Stephen; Gallaher, Jared; Cairns, Bruce; Charles, Anthony

2017-11-01

Nutritional status predicts burn outcomes in the developed world, but its effect on burn mortality in the developing world has not been widely studied. In sub Saharan Africa, burn is primarily a disease of children, and the majority of children in sub-Saharan Africa are malnourished. We therefore sought to determine the prevalence and effect of malnutrition on burn mortality at our institution. This is a retrospective review of children aged 0-5, with anthropomorphic measurements available, who were admitted to our burn unit from July 2011 to May 2016. Age-adjusted Z scores were calculated for height, weight, weight for height, and mid-upper arm circumference (MUAC). Following bivariate analysis, we used logistic regression to construct a fully adjusted model of predictors of mortality. Of the 1357 admitted patients, 839 (61.2%) were aged 0-5. Of those, 512 (62.9%) had one or more anthropomorphic measurements available, and were included in the analysis. 54% were male, and the median age was 28 months. The median TBSA was 15%, with a majority of burns caused by scalds (77%). Mortality was 16%. Average Z-score for any of the indicators of malnutrition was -1.45±1.66. TBSA (OR: 1.08, 95% CI: 1.06, 1.11), decreasing Z-score (OR: 1.19, 95% CI: 1.00, 1.41), and flame burn (OR: 2.51, 95% CI: 1.40, 4.49) were associated with an increase in mortality. Preexisting malnutrition in burn patients in sub-Saharan Africa increases odds of mortality after controlling for significant covariates. Survival of burn patients in this region will not reach that of the developed world until a strategy of aggressive nutritional support is implemented in this population. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Epidemiology of pediatric burns and future prevention strategies-a study of 475 patients from a high-volume burn center in North India.

PubMed

Dhopte, Amol; Tiwari, V K; Patel, Pankaj; Bamal, Rahul

2017-01-01

Pediatric burns have a long-term social impact. This is more apparent in a developing country such as India, where their incidence and morbidity are high. The aim of this study was to provide recent prospective epidemiological data on pediatric burns in India and to suggest future preventive strategies. Children up to 18 years old admitted to the Department of Burns, Plastic & Maxillofacial Surgery, VMMC & Safdarjung Hospital, New Delhi, between January and December 2014 were included in the study. Data regarding age, sex, etiology, total body surface area (TBSA), circumstances of injury, and clinical assessment were collected. The Mann-Whitney test or Kruskal-Wallis test or ANOVA was used to compare involved TBSA among various cohort groups accordingly. Univariate and multivariate linear regression analyses were used to determine the predictors of TBSA. There were a total of 475 patients involved in the study, including seven suicidal burns, all of whom were females with a mean age greater than the cohort average. Age, type of burns, mode of injury, presence or absence of inhalation injury, gender, and time of year (quarter) for admission were found to independently affect the TBSA involved. Electrical burns also formed an important number of presenting burn patients, mainly involving teenagers. Several societal issues have come forth, e.g., child marriage, child labor, and likely psychological problems among female children as suggested by a high incidence of suicidal burns. This study also highlights several issues such as overcrowding, lack of awareness, dangerous cooking practices, and improper use of kerosene oil. There is an emergent need to recognize the problems, formulate strategies, spread awareness, and ban or replace hazardous substances responsible for most burn accidents.

Genital burns in the national burn repository: incidence, etiology, and impact on morbidity and mortality.

PubMed

Harpole, Bethany G; Wibbenmeyer, Lucy A; Erickson, Bradley A

2014-02-01

To better characterize national genital burns (GBs) characteristics using a large burn registry. We hypothesized that mortality and morbidity will be higher in patients with GBs. The National Burn Repository, a large North American registry of hospitalized burn patients, was queried for patients with GB. Burn characteristics and mechanism, demographics, mortality, and surgical interventions were retrieved. Outcomes of interest were mortality, hospital-acquired infection (HAI), and surgical intervention on the genitalia. Adjusted odds ratios (aOR) for outcomes were determined with binomial logistic regression controlling for age, total burn surface area, race, length of stay, gender, and inhalation injury presence. GBs were present in 1245 cases of 71,895 burns (1.7%). Patients with GB had significantly greater average total burn surface area, length of stay, and mortality. In patients with GB, surgery of the genitalia was infrequent (10.4%), with the aOR of receiving surgery higher among men (aOR 2.7, P <.001) and those with third-degree burns (aOR 3.1, P <.002). Presence of a GB increased the odds of HAI (aOR 3.0, P <.0001) and urinary tract infections (aOR 3.4, P <.0001). GB was also an independent predictor of mortality (aOR 1.54) even after adjusting for the increased HAI risk. GBs are rare but associated with higher HAI rates and higher mortality after adjusting for well-established mortality risk factors. Although a cause and effect relationship cannot be established using these registry data, we believe this study suggests the need for special management considerations in GB cases to improve overall outcomes. Copyright © 2014 Elsevier Inc. All rights reserved.

Local Burn-Up Effects in the NBSR Fuel Element

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown N. R.; Hanson A.; Diamond, D.

2013-01-31

This study addresses the over-prediction of local power when the burn-up distribution in each half-element of the NBSR is assumed to be uniform. A single-element model was utilized to quantify the impact of axial and plate-wise burn-up on the power distribution within the NBSR fuel elements for both high-enriched uranium (HEU) and low-enriched uranium (LEU) fuel. To validate this approach, key parameters in the single-element model were compared to parameters from an equilibrium core model, including neutron energy spectrum, power distribution, and integral U-235 vector. The power distribution changes significantly when incorporating local burn-up effects and has lower power peakingmore » relative to the uniform burn-up case. In the uniform burn-up case, the axial relative power peaking is over-predicted by as much as 59% in the HEU single-element and 46% in the LEU single-element with uniform burn-up. In the uniform burn-up case, the plate-wise power peaking is over-predicted by as much as 23% in the HEU single-element and 18% in the LEU single-element. The degree of over-prediction increases as a function of burn-up cycle, with the greatest over-prediction at the end of Cycle 8. The thermal flux peak is always in the mid-plane gap; this causes the local cumulative burn-up near the mid-plane gap to be significantly higher than the fuel element average. Uniform burn-up distribution throughout a half-element also causes a bias in fuel element reactivity worth, due primarily to the neutronic importance of the fissile inventory in the mid-plane gap region.« less

Naval Fuel Management System (NFMS): A Decision Support System for a Limited Resource

DTIC Science & Technology

2010-09-01

Figure 14. Proof of concept displayed on Google Earth. ..................................................50 Figure 15. GTG fuel burn rate. From [10...the gas turbine generators ( GTG ) to provide electricity. An average of 280 gallons per hour (GPH) was used for the GTG to take into account changing... GTGs or operating on more than one GTG for short periods of time. The amount of fuel burned by the GTGs was found in the Shipboard Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Capote, R.; Chen, Y. -J.; Hambsch, F. -J.

Here, the energy spectrum of prompt neutrons emitted in fission (PFNS) plays a very important role in nuclear science and technology. A Coordinated Research Project (CRP) "Evaluation of Prompt Fission Neutron Spectra of Actinides" was established by the IAEA Nuclear Data Section in 2009, with the major goal to produce new PFNS evaluations with uncertainties for actinide nuclei.

Emissions from small-scale burns of simulated deployed U.S. military waste.

PubMed

Woodall, Brian D; Yamamoto, Dirk P; Gullett, Brian K; Touati, Abderrahmane

2012-10-16

U.S. military forces have historically relied on open burning as an expedient method of volume reduction and treatment of solid waste during the conflicts in Afghanistan and Iraq. This study is the first effort to characterize a broad range of pollutants and their emission factors during the burning of military waste and the effects that recycling efforts, namely removing plastics, might have on emissions. Piles of simulated military waste were constructed, burned, and emissions sampled at the U.S. Environmental Protection Agency (EPA) Open Burn Testing Facility (OBTF), Research Triangle Park, NC. Three tests contained polyethylene terephthalate (PET #1 or PET) plastic water bottles and four did not. Emission factors for polycyclic aromatic hydrocarbons (PAHs), volatile organic compounds (VOCs), particulate matter (PM(10), PM(2.5)), polychlorinated and polybrominated dioxins/furans (PCDD/F and PBDD/F), and criteria pollutants were determined and are contained within. The average PCDD/F emission factors were 270 ng-toxic equivalency (TEQ) per kg carbon burned (ng-TEQ/kg Cb), ranging from 35 to 780 ng-TEQ/kg Cb. Limited testing suggests that targeted removal of plastic water bottles has no apparent effect on reducing pollutants and may even promote increased emissions.

Comparison of global inventories of CO2 emissions from biomass burning during 2002-2011 derived from multiple satellite products.

PubMed

Shi, Yusheng; Matsunaga, Tsuneo; Saito, Makoto; Yamaguchi, Yasushi; Chen, Xuehong

2015-11-01

This study compared five widely used globally gridded biomass burning emissions inventories for the 2002-2011 period (Global Fire Emissions Database 3 (GFED3), Global Fire Emissions Database 4 (GFED4), Global Fire Assimilation System 1.0 (GFAS1.0), Fire INventory from NCAR 1.0 (FINN1.0) and Global Inventory for Chemistry-Climate studies-GFED4 (G-G)). Average annual CO2 emissions range from 6521.3 to 9661.5 Tg year(-1) for five inventories, with extensive amounts in Africa, South America and Southeast Asia. Coefficient of Variation for Southern America, Northern and Southern Africa are 30%, 39% and 48%. Globally, the majority of CO2 emissions are released from savanna burnings, followed by forest and cropland burnings. The largest differences among the five inventories are mainly attributable to the overestimation of CO2 emissions by FINN1.0 in Southeast Asia savanna and cropland burning, and underestimation in Southern Africa savanna and Amazon forest burning. The overestimation in Africa by G-G also contributes to the differences. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Uncertainty analysis of moderate- versus coarse-scale satellite fire products for quantifying agricultural burning: Implications for Air Quality in European Russia, Belarus, and Lithuania

NASA Astrophysics Data System (ADS)

McCarty, J. L.; Krylov, A.; Prishchepov, A. V.; Banach, D. M.; Potapov, P.; Tyukavina, A.; Rukhovitch, D.; Koroleva, P.; Turubanova, S.; Romanenkov, V.

2015-12-01

Cropland and pasture burning are common agricultural management practices that negatively impact air quality at a local and regional scale, including contributing to short-lived climate pollutants (SLCPs). This research focuses on both cropland and pasture burning in European Russia, Lithuania, and Belarus. Burned area and fire detections were derived from 500 m and 1 km Moderate Resolution Imaging Spectroradiometer (MODIS), 30 m Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Landsat 8 Operational Land Imager (OLI) data. Carbon, particulate matter, volatile organic carbon (VOCs), and harmful air pollutants (HAPs) emissions were then calculated using MODIS and Landsat-based estimates of fire and land-cover and land-use. Agricultural burning in Belarus, Lithuania, and European Russia showed a strong and consistent seasonal geographic pattern from 2002 to 2012, with the majority of fire detections occurring in March - June and smaller peak in July and August. Over this 11-year period, there was a decrease in both cropland and pasture burning throughout this region. For Smolensk Oblast, a Russian administrative region with comparable agro-environmental conditions to Belarus and Lithuania, a detailed analysis of Landsat-based burned area estimations for croplands and pastures and field data collected in summer 2014 showed that the agricultural burning area can be up to 10 times higher than the 1 km MODIS active fire estimates. In general, European Russia is the main source of agricultural burning emissions compared to Lithuania and Belarus. On average, all cropland burning in European Russia as detected by the MCD45A1 MODIS Burned Area Product emitted 17.66 Gg of PM10 while annual burning of pasture in Smolensk Oblast, Russia as detected by Landsat burn scars emitted 494.85 Gg of PM10, a 96% difference. This highlights that quantifying the contribution of pasture burning and burned area versus cropland burning in agricultural regions is important for accurately calculating carbonaceous emissions and emissions that negatively impact air quality.

Fire danger rating and fire behavior prediction in the United States

Treesearch

Patricia L. Andrews

2005-01-01

For the seven year period from 1998 to 2004, an average of almost 79,000 fires per year on U.S. Federal and State land burned a yearly average of over 22,000 km2. An average of 1 billion US dollars was spent on suppression each year by the Federal agencies alone. Variation in climate, vegetation, and population across the U.S. leads to significant differences in the...

Contributions of Kansas rangeland burning to ambient O3: Analysis of data from 2001 to 2016.

PubMed

Liu, Zifei; Liu, Yang; Murphy, James P; Maghirang, Ronaldo

2018-03-15

Prescribed range/pasture burning is a common practice in Kansas to enhance the nutritional value of native grasses and control invading weeds, trees, and brush. A major concern associated with the burning is the contribution of smoke to elevated ground level ambient ozone (O 3 ). The objective of this study is to estimate contributions of Kansas rangeland burning to ambient O 3 mixing ratios through regression analysis (1) between observed O 3 data and available satellite burn activity data from 2001 to 2016; and (2) between observed O 3 data and the smoke contributions to PM 2.5 which were resolved from receptor modeling. Positive correlations were observed between ambient O 3 levels and the acres burned each year estimated from satellite imagery. When burned acres in April were larger than or equal to 1.9 million, O 3 >70ppb occurred at least at one of the ten monitoring sites in Kansas. Statistical regression models of daily maximum 8-hour O 3 mixing ratios were developed at each of the ten monitoring sites using meteorological predictors. The O 3 model residuals that were not explained by the meteorological effect models were affected by PM 2.5 contributors including sulfate/industrial sources and emissions that generated secondary organic particles, such as rangeland burning, which were derived from receptor modeling. The average O 3 model residual on the high O 3 days in April was 21±9ppb, which was likely associated with smoke emissions from burning. Research will continue to obtain daily satellite burn activity data and to correlate burn data with daily O 3 data, so that modeling of O 3 levels can be improved under influences of daily burn activities. Less frequency of high O 3 days was observed in April since 2011, which may be partly due to implementation of the Flint Hills Smoke Management Plan which promoted better timing of burns. Copyright © 2017 Elsevier B.V. All rights reserved.

Improving global fire carbon emissions estimates by combining moderate resolution burned area and active fire observations

NASA Astrophysics Data System (ADS)

Randerson, J. T.; Chen, Y.; Giglio, L.; Rogers, B. M.; van der Werf, G.

2011-12-01

In several important biomes, including croplands and tropical forests, many small fires exist that have sizes that are well below the detection limit for the current generation of burned area products derived from moderate resolution spectroradiometers. These fires likely have important effects on greenhouse gas and aerosol emissions and regional air quality. Here we developed an approach for combining 1km thermal anomalies (active fires; MOD14A2) and 500m burned area observations (MCD64A1) to estimate the prevalence of these fires and their likely contribution to burned area and carbon emissions. We first estimated active fires within and outside of 500m burn scars in 0.5 degree grid cells during 2001-2010 for which MCD64A1 burned area observations were available. For these two sets of active fires we then examined mean fire radiative power (FRP) and changes in enhanced vegetation index (EVI) derived from 16-day intervals immediately before and after each active fire observation. To estimate the burned area associated with sub-500m fires, we first applied burned area to active fire ratios derived solely from within burned area perimeters to active fires outside of burn perimeters. In a second step, we further modified our sub-500m burned area estimates using EVI changes from active fires outside and within of burned areas (after subtracting EVI changes derived from control regions). We found that in northern and southern Africa savanna regions and in Central and South America dry forest regions, the number of active fires outside of MCD64A1 burned areas increased considerably towards the end of the fire season. EVI changes for active fires outside of burn perimeters were, on average, considerably smaller than EVI changes associated with active fires inside burn scars, providing evidence for burn scars that were substantially smaller than the 25 ha area of a single 500m pixel. FRP estimates also were lower for active fires outside of burn perimeters. In our analysis we quantified how including sub-500m burned area influenced global burned area, carbon emissions, and net ecosystem exchange (NEE) in different continental regions using the Global Fire Emissions Database (GFED) biogeochemical model. We conclude by discussing validation needs using higher resolution visible and thermal imagery.

Green strips or vegetative fuel breaks

Treesearch

Loren St. John; Dan Ogle

2009-01-01

According to the National Interagency Fire Center, between 1998 and 2008 there were on average 65,581 fires per year and an average of 6,114,135 acres burned each year in the United States. Rangelands in the western United States have been invaded by many annual weed species including cheatgrass, an introduced winter annual grass that produces large quantities of...

40 CFR 63.1205 - What are the standards for hazardous waste burning lightweight aggregate kilns that are effective...

Code of Federal Regulations, 2012 CFR

2012-07-01

... rolling average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid... hydrochloric acid equivalents, dry basis and corrected to 7 percent oxygen; and (7) Particulate matter in... average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid and...

40 CFR 63.1205 - What are the standards for hazardous waste burning lightweight aggregate kilns that are effective...

Code of Federal Regulations, 2010 CFR

2010-07-01

... rolling average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid... hydrochloric acid equivalents, dry basis and corrected to 7 percent oxygen; and (7) Particulate matter in... average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid and...

40 CFR 63.1205 - What are the standards for hazardous waste burning lightweight aggregate kilns that are effective...

Code of Federal Regulations, 2011 CFR

2011-07-01

... rolling average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid... hydrochloric acid equivalents, dry basis and corrected to 7 percent oxygen; and (7) Particulate matter in... average, dry basis, corrected to 7 percent oxygen, and reported as propane; (6) Hydrochloric acid and...

40 CFR Table 8 to Subpart Ddddd of... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2012 CFR

2012-07-01

...(c). 5. Dry Scrubber Sorbent or Carbon Injection Rate a. Collecting the sorbent or carbon injection... the data to 3-hour block averages; and c. Maintaining the 3-hour average sorbent or carbon injection... established during the performance test according to §§ 63.7530(c). 7. Fuel Pollutant Content a. Only burning...

40 CFR Table 8 to Subpart Ddddd of... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2010 CFR

2010-07-01

...(c). 5. Dry Scrubber Sorbent or Carbon Injection Rate a. Collecting the sorbent or carbon injection... the data to 3-hour block averages; and c. Maintaining the 3-hour average sorbent or carbon injection... established during the performance test according to §§ 63.7530(c). 7. Fuel Pollutant Content a. Only burning...

40 CFR Table 8 to Subpart Ddddd of... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2011 CFR

2011-07-01

...(c). 5. Dry Scrubber Sorbent or Carbon Injection Rate a. Collecting the sorbent or carbon injection... the data to 3-hour block averages; and c. Maintaining the 3-hour average sorbent or carbon injection... established during the performance test according to §§ 63.7530(c). 7. Fuel Pollutant Content a. Only burning...

Source apportionment of carbonaceous aerosols in a megacity of northwest China: insights from radiocarbon measurement

NASA Astrophysics Data System (ADS)

Ni, Haiyan; Huang, Rujin; Dusek, Ulrike

2017-04-01

Fine particulate matter (PM2.5) samples were collected from 5 July 2008 to 27 June 2009 at Xi'an, a very polluted megacity in Northwest China. The 24 h averaged PM2.5concentrations (ranged from 32 μg m-3 to 339 μg m-3) were 1-14 times higher than the WHO guideline for 24 h PM2.5(25 μg m-3). In this work, we unambiguously quantify fossil (e.g., vehicle emissions, coal burning etc.) and non-fossil (e.g., biomass burning, cooking, biogenic emissions etc.) contributions to organic carbon (OC) and elemental carbon (EC) of PM2.5using radiocarbon (14C) measurement. In addition, we measured PM2.5 major components and source markers, including OC and EC, ions, trace elements, polycyclic aromatic hydrocarbons (PAHs), oxygenated PAHs (o-PAHs), anhydrous sugars and hopanes. The preliminary results of radiocarbon measurements in OC and EC show that the annual mean contributions from fossil-fuel combustion to EC was 76 ± 8% (6 ± 2 μg m-3). The remaining 24 ± 8% (2 ± 1 μg m-3) was attributed to biomass burning, with higher contribution in the cold period (˜33%) compared to the warm period (˜21%), due to enhanced emissions from local biomass burning activities in winter. In contrast with EC, OC was dominated by non-fossil sources, with an annual average of 54 ± 8 % (13 ± 10 μg m-3). Clear seasonal variations were seen in OC concentrations both from fossil fuel (OCff), and from non-fossil sources (OCnf), with maxima in the cold period and minima in the warm period, because of enhanced fossil and non-fossil activities in winter, mainly biomass burning and domestic coal burning. Further source apportionment of OC, including primary/secondary fossil OC, primary/secondary non-fossil OC, will be conducted by combining 14C results with positive matrix factorization (PMF) analysis of organic matter (OM).

Single-particle characterization of biomass burning organic aerosol (BBOA): evidence for non-uniform mixing of high molecular weight organics and potassium

NASA Astrophysics Data System (ADS)

Lee, Alex K. Y.; Willis, Megan D.; Healy, Robert M.; Wang, Jon M.; Jeong, Cheol-Heon; Wenger, John C.; Evans, Greg J.; Abbatt, Jonathan P. D.

2016-05-01

Biomass burning organic aerosol (BBOA) can be emitted from natural forest fires and human activities such as agricultural burning and domestic energy generation. BBOA is strongly associated with atmospheric brown carbon (BrC) that absorbs near-ultraviolet and visible light, resulting in significant impacts on regional visibility degradation and radiative forcing. The mixing state of BBOA can play a critical role in the prediction of aerosol optical properties. In this work, single-particle measurements from a Soot-Particle Aerosol Mass Spectrometer coupled with a light scattering module (LS-SP-AMS) were performed to examine the mixing state of BBOA, refractory black carbon (rBC), and potassium (K, a tracer for biomass burning aerosol) in an air mass influenced by wildfire emissions transported from northern Québec to Toronto, representing aged biomass burning plumes. Cluster analysis of single-particle measurements identified five BBOA-related particle types. rBC accounted for 3-14 wt % of these particle types on average. Only one particle type exhibited a strong ion signal for K+, with mass spectra characterized by low molecular weight organic species. The remaining four particle types were classified based on the apparent molecular weight of the BBOA constituents. Two particle types were associated with low potassium content and significant amounts of high molecular weight (HMW) organic compounds. Our observations indicate non-uniform mixing of particles within a biomass burning plume in terms of molecular weight and illustrate that HMW BBOA can be a key contributor to low-volatility BrC observed in BBOA particles. The average mass absorption efficiency of low-volatility BBOA is about 0.8-1.1 m2 g-1 based on a theoretical closure calculation. Our estimates indicate that low-volatility BBOA contributes ˜ 33-44 % of thermo-processed particle absorption at 405 nm; and almost all of the BBOA absorption was associated with low-volatility organics.

Cost Analysis of 48 Burn Patients in a Mass Casualty Explosion Treated at Chang Gung Memorial Hospital.

PubMed

Mathews, Alexandra L; Cheng, Ming-Huei; Muller, John-Michael; Lin, Miffy Chia-Yu; Chang, Kate W C; Chung, Kevin C

2017-01-01

Little is known about the costs of treating burn patients after a mass casualty event. A devastating Color Dust explosion that injured 499 patients occurred on June 27, 2015 in Taiwan. This study was performed to investigate the economic effects of treating burn patients at a single medical center after an explosion disaster. A detailed retrospective analysis on 48 patient expense records at Chang Gung Memorial Hospital after the Color Dust explosion was performed. Data were collected during the acute treatment period between June 27, 2015 and September 30, 2015. The distribution of cost drivers for the entire patient cohort (n=48), patients with a percent total body surface area burn (%TBSA)≥50 (n=20), and those with %TBSA <50 (n=28) were analyzed. The total cost of 48 burn patients over the acute 3-month time period was $2,440,688, with a mean cost per patient of $50,848 ±36,438. Inpatient ward fees (30%), therapeutic treatment fees (22%), and medication fees (11%) were found to be the three highest cost drivers. The 20 patients with a %TBSA ≥50 consumed $1,559,300 (63.8%) of the total expenses, at an average cost of $77,965±34,226 per patient. The 28 patients with a %TBSA <50 consumed $881,387 (36.1%) of care expenses, at an average cost of $31,478±23,518 per patient. In response to this mass casualty event, inpatient ward fees represented the largest expense. Hospitals can reduce this fee by ensuring wound dressing and skin substitute materials are regionally stocked and accessible. Medication fees may be higher than expected when treating a mass burn cohort. In preparation for a future event, hospitals should anticipate patients with a %TBSA≥50 will contribute the majority of inpatient expenses. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of adipose derived stromal vascular fraction on stasis zone in an experimental burn model.

PubMed

Eyuboglu, Atilla Adnan; Uysal, Cagri A; Ozgun, Gonca; Coskun, Erhan; Markal Ertas, Nilgun; Haberal, Mehmet

2018-03-01

Stasis zone is the surrounding area of the coagulation zone which is an important part determining the extent of the necrosis in burn patients. In our study we aim to salvage the stasis zone by injecting adipose derived stromal vascular fraction (ADSVF). Thermal injury was applied on dorsum of Sprague-Dawley rats (n=20) by the "comb burn" model as described previously. When the burn injury was established on Sprague-Dawley rats (30min); rat dorsum was separated into 2 equal parts consisting of 4 burn zones (3 stasis zone) on each pair. ADSVF cells harvested from inguinal fat pads of Sprague-Dawley rats (n=5) were injected on the right side while same amount of phosphate buffered saline (PBS) injected on the left side of the same animal. One week later, average vital tissue on the statis zone was determined by macroscopy, angiography and microscopy. Vascular density, inflammatory cell density, gradient of fibrosis and epithelial thickness were determined via immunohistochemical assay. Macroscopic stasis zone tissue viability (32±3.28%, 57±4.28%) (p<0.01), average number of vessels (10.28±1.28, 19.43±1.72) (p<0.01), capillary count (15.67±1.97, 25.35±2.15) (p<0.01) vascular density (1.55±0.38, 2.14±0.45) (p<0.01) epithelial thickness (0.014±0.009mm, 0.024±0.0011mm) were higher on ADSVF side. Fibrosis gradient (1.87±0.51, 1.50±0.43) (p<0.01) and inflammatory cell density (1.33±0.40, 1.20±0.32) (p<0.01) were higher on the PBS side. Macroscopic and microscopic findings determined that ADSVF has a statistically significant benefit for salvaging stasis zone on acute burn injuries. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Cost Analysis of 48 Burn Patients in a Mass Casualty Explosion Treated at Chang Gung Memorial Hospital

PubMed Central

Mathews, Alexandra L.; Cheng, Ming-Huei; Muller, John-Michael; Lin, Miffy Chia-Yu; Chang, Kate W.C.; Chung, Kevin C.

2016-01-01

Introduction Little is known about the costs of treating burn patients after a mass casualty event. A devastating Color Dust explosion that injured 499 patients occurred on June 27, 2015 in Taiwan. This study was performed to investigate the economic effects of treating burn patients at a single medical center after an explosion disaster. Methods A detailed retrospective analysis on 48 patient expense records at Chang Gung Memorial Hospital after the Color Dust explosion was performed. Data were collected during the acute treatment period between June 27, 2015 and September 30, 2015. The distribution of cost drivers for the entire patient cohort (n=48), patients with a percent total body surface area burn (%TBSA) ≥ 50 (n=20), and those with %TBSA <50 (n=28) were analyzed. Results The total cost of 48 burn patients over the acute 3-month time period was $2,440,688, with a mean cost per patient of $50,848 ±36,438. Inpatient ward fees (30%), therapeutic treatment fees (22%), and medication fees (11%) were found to be the three highest cost drivers. The 20 patients with a %TBSA ≥50 consumed $1,559,300 (63.8%) of the total expenses, at an average cost of $77,965 ± 34,226 per patient. The 28 patients with a %TBSA <50 consumed $881,387 (36.1%) of care expenses, at an average cost of $31,478 ± 23,518 per patient. Conclusions In response to this mass casualty event, inpatient ward fees represented the largest expense. Hospitals can reduce this fee by ensuring wound dressing and skin substitute materials are regionally stocked and accessible. Medication fees may be higher than expected when treating a mass burn cohort. In preparation for a future event, hospitals should anticipate patients with a %TBSA ≥ 50 will contribute the majority of inpatient expenses. PMID:27553390

Fluorine-fixing efficiency on calcium-based briquette: pilot experiment, demonstration and promotion.

PubMed

Yang, Jiao-lan; Chen, Dong-qing; Li, Shu-min; Yue, Yin-ling; Jin, Xin; Zhao, Bing-cheng; Ying, Bo

2010-02-05

The fluorosis derived from coal burning is a very serious problem in China. By using fluorine-fixing technology during coal burning we are able to reduce the release of fluorides in coal at the source in order to reduce pollution to the surrounding environment by coal burning pollutants as well as decrease the intake and accumulating amounts of fluorine in the human body. The aim of this study was to conduct a pilot experiment on calcium-based fluorine-fixing material efficiency during coal burning to demonstrate and promote the technology based on laboratory research. A proper amount of calcium-based fluorine sorbent was added into high-fluorine coal to form briquettes so that the fluorine in high-fluorine coal can be fixed in coal slag and its release into atmosphere reduced. We determined figures on various components in briquettes and fluorine in coal slag as well as the concentrations of indoor air pollutants, including fluoride, sulfur dioxide and respirable particulate matter (RPM), and evaluated the fluorine-fixing efficiency of calcium-based fluorine sorbents and the levels of indoor air pollutants. Pilot experiments on fluorine-fixing efficiency during coal burning as well as its demonstration and promotion were carried out separately in Guiding and Longli Counties of Guizhou Province, two areas with coal burning fluorosis problems. If the calcium-based fluorine sorbent mixed coal was made into honeycomb briquettes the average fluorine-fixing ratio in the pilot experiment was 71.8%. If the burning calcium-based fluorine-fixing bitumite was made into a coalball, the average of fluorine-fixing ratio was 77.3%. The concentration of fluoride, sulfur dioxide and PM10 of indoor air were decreased significantly. There was a 10% increase in the cost of briquettes due to the addition of calcium-based fluorine sorbent. The preparation process of calcium-based fluorine-fixing briquette is simple yet highly flammable and it is applicable to regions with abundant bitumite coal. As a small scale application, villagers may make fluorine-fixing coalballs or briquettes by themselves, achieving the optimum fluorine-fixing efficiency and reducing indoor air pollutants providing environmental and social benefits.

Effects of Mechanical Soil Disturbance on Rill Connectivity and Soil Erosion Following Logging on Burned Hillslopes in Central California

NASA Astrophysics Data System (ADS)

Olsen, W.; Wagenbrenner, J. W.; Demirtas, I.; Robichaud, P. R.

2016-12-01

Soil erosion rates in forests increase after severe fires and may pose a threat to aquatic resources. While research has shown that the harvest of burned trees ("salvage logging") may elevate post-fire erosion, it is less clear how disturbance from logging affects rill erosion and sediment yields. We studied 14 catchments (900-7400 m2 "swales") in the area burned by the 2013 Rim Fire in the California Sierra Nevada, nine of which were burned and logged, and five that were burned and unlogged. We installed silt fences, surveyed mechanical disturbance and rill networks, and measured ground cover following logging that occurred between fall 2014 and fall 2015. The logged swales had 20-162 trees ha-1 removed, and high traffic skid trails covered 8-28% of the swale area while low traffic skid trails covered 0-13% of the area. Feller-buncher tracks were minimal at 0-6% of the swale area. Following logging, wood cover increased, while vegetation cover remained about the same. Rills densities ranged from 0.3-22 m m-2 in logged swales and 2.2-16 m m-2 in unlogged swales. Higher bare soil percentages led to increased rill density in all swales. Rills that initiated in high traffic skid trails averaged 42 m in the swales, while rills from untrafficked burned soil averaged 26 m. The number of rills from high traffic skid trails increased with the amount of skid trail area, and often were diverted by waterbars toward the swale outlets. Sediment yields increased with rill density, and did not appear to respond to the modest increase in wood cover post-logging. Results indicate that rill erosion is a dominant sediment transport mechanism for both burned forests and salvage logged forests at the hillslope to small catchment scale. Mitigating skidding disturbance, appropriate placement of waterbars, and reducing the connectivity of bare soil after logging will be important to reduce rilling and sediment yields related to salvage logging.

Theory of Photoemission in Actinides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Svane, Axel

2008-07-01

A theory is presented which describes the photoemission spectra of actinide compounds starting from the atomic limit of isolated actinide ions. The multiplets of the ion are calculated and an additional term is introduced to describe the interaction with the sea of conduction electrons. This leads to complex mixed-valent ground states, which describes well the rich spectrum observed for PuSe. In particular, the three-peak feature, which is often seen in Pu and Pu compounds in the vicinity of the Fermi level originates from f{sup 6} {yields} f{sup 5} emission. The theory is further applied to PuSb, PuCoGa{sub 5} and Am.more » (author)« less

Method for extracting lanthanides and actinides from acid solutions by modification of purex solvent

DOEpatents

Horwitz, E. Philip; Kalina, Dale G.

1986-01-01

A process for the recovery of actinide and lanthanide values from aqueous solutions with an extraction solution containing an organic extractant having the formula: ##STR1## where .phi. is phenyl, R.sup.1 is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R.sup.2 is an alkyl containing from 3 to 6 carbon atoms and phase modifiers in a water-immiscible hydrocarbon diluent. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

SEPARATION OF TRANSURANIC ELEMENTS FROM RARE EARTH COMPOUNDS

DOEpatents

Kohman, T.P.

1961-11-21

A process of separating neptunium and plutonium values from rare earths and alkaline earth fission products present on a solid mixed actinide carrier (Th or U(IV) oxalate or fluoride) --fission product carrier (LaF/sub 3/, CeF/sub 3/, SrF/sub 2/, CaF/sub 2/, YF/sub 3/, La oxalate, cerous oxalate, Sr oxalate, Ca oxalate or Y oxalate) by extraction of the actinides at elevated temperature with a solution of ammonium fluoride and/or ammonium oxalate is described. Separation of the fission-product-containing carriers from the actinide solution formed and precipitation of the neptunium and plutonium from the solution with mineral acid are also accomplished. (AEC)

[Bibliometric analysis of scientific articles on evidence-based nursing of burn in the mainland of China].

PubMed

Yue, L Q; Pi, X Q; Fan, X G

2016-07-20

To analyze the current research status of evidence-based nursing of burn in the mainland of China, in order to provide basis for the improvement of scientificity of burn nursing practice. Chinese scientific articles on evidence-based nursing of burn in the mainland of China published from January 1997 to December 2015 were retrieved from Chinese Biology Medicine disc, Chinese Journals Full-text Database, Wanfang Database, and VIP Database. From the results retrieved, date with regard to publication year, region of affiliation of the first author, journal distribution, literature type, literature quality assessment, topic of evidence-based research, fund program support, implementation of evidence-based practice steps, and language and quantity of reference. Data were processed with Microsoft Excel software. A total of 50 articles conforming to the criteria were retrieved. (1) Articles about evidence-based nursing of burn arose in 2004. Compared with that in the previous year, there was no obvious increase in the number of relevant articles in each year from 2004 to 2011. The number of literature in 2012 was obviously increased than that in each year from 2004 to 2011, while the number of literature in each year from 2012 to 2015 was not obviously increased compared with that in the previous year. (2) The regions of affiliation of the first author were distributed in 13 provinces, 3 minority autonomous regions, and 3 municipalities, with the largest distribution in East China, and Northwest China and Southwest China in the follow. (3) The articles were published in 32 domestic journals, with 9 (28.12%) nursing journals, 5 (15.62%) burn medical related journals, and 18 (56.25%) other journals. Twenty (40%) articles were published in Source Journal for Chinese Scientific and Technical Papers. (4) Regarding the literature type, 31 (62%) articles dealt with clinical experiences, 17 (34%) articles dealt with scientific research, and 2 (4%) articles dealt with case report. (5) There were 21 quantitative study articles and 29 narrative study articles, all with low quality. (6) The topics of evidence-based research in these articles were mainly burn rehabilitation, burn nursing technology, pediatric burn, inhalation injury and airway management, and complications of burn injury. Only one study was supported by fund program. (7) Only one article described complete evidence-based practice steps. (8) The literature cited 57 English articles as references, with an average of 1.14, and 316 Chinese articles, with an average of 6.32. The concept of evidence-based nursing of burn has been initially formed in the mainland of China. The number of relevant articles is on the rise, but the quality needs to be further improved. There is an urgent need to improve nurses' understanding of evidence-based nursing and their command of the method of evidence-based practice through on-job training, so as to improve the scientificity and effectiveness of burn nursing.

Improved estimates of biomass burning emissions in the southeast United States

NASA Astrophysics Data System (ADS)

Nowell, H.; Holmes, C.; Elsner, J.; Hiers, J. K.; Robertson, K.

2017-12-01

Biomass burning is a major source of gas and particle emissions that affects air quality, human health, and climate. Prescribed burns in the southeastern United States consume more biomass and cover a larger area than fires in the rest of the United States combined. Although fires can be detected remotely from thermal infrared emission and changes to surface reflectance, there are multiple issues that make satellite detections difficult in the eastern United States. These include small fire sizes, short duration, low intensity, canopy coverage, and rapid vegetation regrowth. Some attempts have been made to compensate for this bias, for example the small fire product in the Global Fire Emission Database (GFED4.1s) product. The accuracy of GFED and other remotely sensed global fire emission inventories are largely unknown, outside of a few field studies, mainly because there are few independent datasets of fire extent. The Florida Forest Service (FFS) has extensive records on fire type, size, location, and time for both prescribed and wild fires, which have not previously been used to evaluate fire area and emissions. For our study period of 2004 to 2016, we compared FFS burn authorization data against GFED4.1s burned area. When averaged across the state of Florida, there is 4 times more land burned than detected from satellite sensors. When comparing FFS data against high quality records from Apalachicola National Forest, Avon Park Air Force Range, Eglin Air Force Base, Tall Timbers Research Station, and Tyndall Air Force base, the areal discrepancy between these records and FFS reports are +/- 15%, well below the 4 times detection discrepancy between satellites and FFS reports. We have developed a method to statistically correct this satellite bias in fire detections. Treating the FFS burn authorizations as accurate, we have found this bias ratio can be predicted from fire size, land cover type, leaf area, and month. The regression model incorporating these factors can predict greater than 80% of variance in bias ratio across Florida during the summer months with correlations around 0.6 on average. This improved estimate of burned area in Florida will be used in global circulation models to determine the true contribution of prescribed wild fires in the southeast United States to gas and particle emissions.

Experimental Investigations Of The Influence Of Pressure On Critical Extinction Conditions Of Laminar Nonpremixed Flames Burning Condensed Hydrocarbon Fuels, Jet Fuels, And Surrogates

DTIC Science & Technology

2014-10-25

cycloalkanes, aromatics, and alkenes [3,23–26]. On average, the composition by volume is approximately 60% alkanes, 20% cycloalkanes, 18% aromatics, and 2... alkenes [26]. Efforts to develop chemical-kinetic models that accurately describe the combustion of these practical fuels are critical to the development... method also allows for measurements of fuel mass burning rates by recording the required fuel feed rate to maintain the fuel cup level under steady

Effect of tank diameter on thermal behavior of gasoline and diesel storage tanks fires.

PubMed

Leite, Ricardo Machado; Centeno, Felipe Roman

2018-01-15

Studies on fire behavior are extremely important as they contribute in a firefighting situation or even to avoid such hazard. Experimental studies of fire in real scale are unfeasible, implying that reduced-scale experiments must be performed, and results extrapolated to the range of interest. This research aims to experimentally study the fire behavior in tanks of 0.04m, 0.20m, 0.40m, 0.80m and 4.28m diameter, burning regular gasoline or diesel oil S-500. The following parameters were here obtained: burning rates, burning velocities, heat release rates, flame heights, and temperature distributions adjacent to the tank. Such parameters were obtained for each tank diameter with the purpose of correlating the results and understanding the relationship of each parameter for the different geometrical scale of the tanks. Asymptotic results for larger tanks were found as (regular gasoline and diesel oil S-500, respectively): burning rates 0.050kg/(m 2 s) and 0.031kg/(m 2 s), burning velocities 4.0mm/min and 2.5mm/min, heat release rates per unit area 2200kW/m 2 and 1500kW/m 2 , normalized averaged flame heights (H i /D, where H i is the average flame height, D is the tank diameter) 0.9 and 0.8. Maximum temperatures for gasoline pools were higher than for diesel oil pools, and temperature gradients close to the tanks were also higher for the former fuel. The behavior of the maximum temperature was correlated as a function of the tank diameter, the heat release rate of each fuel and the dimensionless distance from the tank. Copyright © 2017 Elsevier B.V. All rights reserved.

Use and efficacy of a nutrition protocol for patients with burns in intensive care.

PubMed

Lown, D

1991-01-01

The University of Michigan Burn Center uses a protocol to standardize the assessment, initiation, and monitoring of nutritional support for patients with burns of greater than 30% total body surface area (TBSA). Six patients with 20% to 80% TBSA burns were followed for 3 weeks to determine the effect of the protocol on the assessment, initiation, monitoring, and adequacy of nutritional support. The protocol calls for resting energy expenditure (REE) measurement within 24 hours of injury, to be repeated 3 times per week, for assessment of caloric requirements. Patients experienced an average delay before first REE measurement of 3 days after burn injury because measurements were unavailable on weekends and surgical days. REE measurements were used to determine caloric requirements and to tailor nutritional support to fluctuating metabolic needs. In four of the six patients a Dobhoff feeding tube (Biosearch Medical Products, Inc., Somerville, N.J.) was placed in the small bowel and enteral nutrition was initiated within 24 hours of admission, as outlined in the protocol. Two patients received concurrent parenteral nutrition because of difficulty in placing the Dobhoff feeding tube when fluoroscopy was not available. The three patients receiving nutrition solely through enteral feeding had achieved 100% of their caloric requirements by day 2, 4, and greater than 7 days after injury, respectively. Overall, the six patients received enterally an average of 75% of their caloric requirements. The major reason for inadequate enteral support was interruption of tube feedings because of tube dislodgment or multiple surgical procedures. The protocol used weekly measurements of total iron-binding capacity and prealbumin level s parameters of nutritional support.(ABSTRACT TRUNCATED AT 250 WORDS)

Estimating mercury emissions resulting from wildfire in forests of the Western United States.

PubMed

Webster, Jackson P; Kane, Tyler J; Obrist, Daniel; Ryan, Joseph N; Aiken, George R

2016-10-15

Understanding the emissions of mercury (Hg) from wildfires is important for quantifying the global atmospheric Hg sources. Emissions of Hg from soils resulting from wildfires in the Western United States was estimated for the 2000 to 2013 period, and the potential emission of Hg from forest soils was assessed as a function of forest type and soil-heating. Wildfire released an annual average of 3100±1900kg-Hgy(-1) for the years spanning 2000-2013 in the 11 states within the study area. This estimate is nearly 5-fold lower than previous estimates for the study region. Lower emission estimates are attributed to an inclusion of fire severity within burn perimeters. Within reported wildfire perimeters, the average distribution of low, moderate, and high severity burns was 52, 29, and 19% of the total area, respectively. Review of literature data suggests that that low severity burning does not result in soil heating, moderate severity fire results in shallow soil heating, and high severity fire results in relatively deep soil heating (<5cm). Using this approach, emission factors for high severity burns ranged from 58 to 640μg-Hgkg-fuel(-1). In contrast, low severity burns have emission factors that are estimated to be only 18-34μg-Hgkg-fuel(-1). In this estimate, wildfire is predicted to release 1-30gHgha(-1) from Western United States forest soils while above ground fuels are projected to contribute an additional 0.9 to 7.8gHgha(-1). Land cover types with low biomass (desert scrub) are projected to release less than 1gHgha(-1). Following soil sources, fuel source contributions to total Hg emissions generally followed the order of duff>wood>foliage>litter>branches. Copyright © 2016 Elsevier B.V. All rights reserved.

AWBATTM: Early Clinical Experience

PubMed Central

Vandenberg, Victoria B.

2010-01-01

Objective: The purpose of this article is to describe the early clinical experience with AWBAT. Methods: Burn patients requiring (1) donor sites or (2) treatment of a superficial burn wound injury were treated. A total of 45 patients with 69 distinct wounds were included. AWBATTM-D was evaluated in donor sites and AWBATTM-S was evaluated in superficial partial-thickness burns. Days to healing, pain, hematoma/seroma formation, and infection were noted. Ease of application, adherence, transparency, and physical adaptability details were collected. Results: Average period to healing of donor sites treated with AWBAT-D (n=22 patients with n=26 wounds) was 11.2 days, σ =1.95, with a range of 8–15 days and a median of 11 days. Pain rating at 24 hours was 1.2, σ =0.43 (n=18) and at 48 hours mean was 1.2, σ =0.46 (n=15). Average period to healing of superficial burns treated with AWBAT-S (n=15 patients with n=18 wounds) was 8.1 days, σ =2.48, with a range of 5–13 days and a median of 7 days. Pain rating at 24 hours was 1.5, σ =0.85 (n=10) and at 48 hours mean was 1.75, σ =0.89 (n=8). There was zero incidence of hematoma/seroma. No infections were seen. Results indicate that AWBAT was easily applied with good initial adherence. It was noted to be transparent, conformant, and pliable. Discussion: Early experience demonstrates that AWBAT performs well on donor sites and superficial partial-thickness burns and delivers the desired attributes of a temporary skin substitute including good adherence, infection control, transparency, adapatability, and pain control. PMID:20361005

Extent, nature and hospital costs of fireworks-related injuries during the Wednesday Eve Festival in Iran

PubMed Central

Alinia, Siros; Rezaei, Satar; Daroudi, Rajabali; Hadadi, Mashyaneh; Akbari Sari, Ali

2013-01-01

Abstract: Background: Fireworks are commonly used in local and national celebrations. The aim of this study is to explore the extent, nature and hospital costs of injuries related to the Persian Wednesday Eve festival in Iran. Methods: Data for injuries caused by fireworks during the 2009 Persian Wednesday Eve festival were collected from the national Ministry of Health database. Injuries were divided into nine groups and the average and total hospital costs were estimated for each group. The cost of care for patients with burns was estimated by reviewing a sample of 100 patients randomly selected from a large burn center in Tehran. Other costs were estimated by conducting semi structured interviews with expert managers at two large government hospitals. Results: 1817 people were injured by fireworks during the 2009 Wednesday Eve festival. The most frequently injured sites were the hand (43.3%), eye (24.5%) and face (13.2%), and the most common types of injury were burns (39.9%), contusions/abrasions (24.6%) and lacerations (12.7%). The mean length of hospital stay was 8.15 days for patients with burns, 10.7 days for those with amputations, and 3 days for those with other types of injury. The total hospital cost of injuries was US$ 284 000 and the average cost per injury was US$ 156. The total hospital cost of patients with amputations was US$ 48 598. Most of the costs were related to burns (56.6%) followed by amputations (12.2%). Conclusions: Injuries related to the Persian Wednesday Eve festival are common and lead to extensive morbidity and medical costs. PMID:21964162

Extent, nature and hospital costs of fireworks-related injuries during the Wednesday Eve festival in Iran.

PubMed

Alinia, Siros; Rezaei, Satar; Daroudi, Rajabali; Hadadi, Mashyaneh; Akbari Sari, Ali

2013-01-01

Fireworks are commonly used in local and national celebrations. The aim of this study is to explore the extent, nature and hospital costs of injuries related to the Persian Wednesday Eve festival in Iran. Data for injuries caused by fireworks during the 2009 Persian Wednesday Eve festival were collected from the national Ministry of Health database. Injuries were divided into nine groups and the average and total hospital costs were estimated for each group. The cost of care for patients with burns was estimated by reviewing a sample of 100 patients randomly selected from a large burn center in Tehran. Other costs were estimated by conducting semi structured interviews with expert managers at two large government hospitals. 1817 people were injured by fireworks during the 2009 Wednesday Eve festival. The most frequently injured sites were the hand (43.3%), eye (24.5%) and face (13.2%), and the most common types of injury were burns (39.9%), contusions/abrasions (24.6%) and lacerations (12.7%). The mean length of hospital stay was 8.15 days for patients with burns, 10.7 days for those with amputations, and 3 days for those with other types of injury. The total hospital cost of injuries was US$ 284 000 and the average cost per injury was US$ 156. The total hospital cost of patients with amputations was US$ 48 598. Most of the costs were related to burns (56.6%) followed by amputations (12.2%). Injuries related to the Persian Wednesday Eve festival are common and lead to extensive morbidity and medical costs. © 2013 KUMS, All rights reserved.

Wintertime aerosol chemical composition and source apportionment of the organic fraction across Ireland

NASA Astrophysics Data System (ADS)

Ovadnevaite, J.; Lin, C.; Ceburnis, D.; Huang, R. J. J.; O'Dowd, C. D. D.

2017-12-01

A national wide characterization of PM1 was studied for the first time using a high-time resolution Aerosol Chemical Speciation Monitor (ACSM) and Aethalometer in Ireland during the heating season. Dublin, the capital of Ireland, is the most polluted area with an average PM1 of 7.6 μg/m3, with frequent occurrence of peak concentration over 200 μg/m3 primarily due to solid fuels burning, while Mace Head, in the west coast, is least polluted with an average PM1 of 0.8 μg/m3 due to the distance from the emission sources. The organic aerosol is the most dominant species across Ireland, contributing 65%, 58%, 32%, 33% to total PM1 mass in Dublin, Birr, Carnsore Point, and Mace Head, respectively. Birr, a small town in the midland of Ireland, has comparable PM1 levels (4.8 μg/m3) and similar chemical compositions with that in Dublin. Carnsore Point, on the southeast coast, has similar composition with that at Mace Head, but nearly 3 times the levels of PM1 mass due to its relative closeness to other European countries. Positive matrix factorization (PMF) with the multi-linear engine (ME-2) was performed on the organic matrix to quantify the contribution of factor candidates. Peat burning was found to be the dominant factor across Ireland, contributing more than 40% of the total organic mass in Dublin and Birr while OOA is dominant at rural Carnsore Point and Mace Head. Possible geographic origins of PM1 species and organic factors using polar plots were explored. The findings of solid fuels burning (primarily peat burning) driving the pollution episodes suggest an elimination or controlled emission of solid fuels burning would reduce PM1 by at least 50%.

Sources of debris flow material in burned areas

USGS Publications Warehouse

Santi, P.M.; deWolfe, V.G.; Higgins, J.D.; Cannon, S.H.; Gartner, J.E.

2008-01-01

The vulnerability of recently burned areas to debris flows has been well established. Likewise, it has been shown that many, if not most, post-fire debris flows are initiated by runoff and erosion and grow in size through erosion and scour by the moving debris flow, as opposed to landslide-initiated flows with little growth. To better understand the development and character of these flows, a study has been completed encompassing 46 debris flows in California, Utah, and Colorado, in nine different recently burned areas. For each debris flow, progressive debris production was measured at intervals along the length of the channel, and from these measurements graphs were developed showing cumulative volume of debris as a function of channel length. All 46 debris flows showed significant bulking by scour and erosion, with average yield rates for each channel ranging from 0.3 to 9.9??m3 of debris produced for every meter of channel length, with an overall average value of 2.5??m3/m. Significant increases in yield rate partway down the channel were identified in 87% of the channels, with an average of a three-fold increase in yield rate. Yield rates for short reaches of channels (up to several hundred meters) ranged as high as 22.3??m3/m. Debris was contributed from side channels into the main channels for 54% of the flows, with an average of 23% of the total debris coming from those side channels. Rill erosion was identified for 30% of the flows, with rills contributing between 0.1 and 10.5% of the total debris, with an average of 3%. Debris was deposited as levees in 87% of the flows, with most of the deposition occurring in the lower part of the basin. A median value of 10% of the total debris flow was deposited as levees for these cases, with a range from near zero to nearly 100%. These results show that channel erosion and scour are the dominant sources of debris in burned areas, with yield rates increasing significantly partway down the channel. Side channels are much more important sources of debris than rills. Levees are very common, but the size and effect on the amount of debris that reaches a canyon mouth is highly variable. ?? 2007 Elsevier B.V. All rights reserved.

Two-year follow-up of outcomes related to scarring and distress in children with severe burns.

PubMed

Wurzer, Paul; Forbes, Abigail A; Hundeshagen, Gabriel; Andersen, Clark R; Epperson, Kathryn M; Meyer, Walter J; Kamolz, Lars P; Branski, Ludwik K; Suman, Oscar E; Herndon, David N; Finnerty, Celeste C

2017-08-01

We assessed the perception of scarring and distress by pediatric burn survivors with burns covering more than one-third of total body surface area (TBSA) for up to 2 years post-burn. Children with severe burns were admitted to our hospital between 2004 and 2012, and consented to this IRB-approved-study. Subjects completed at least one Scars Problems and/or Distress questionnaire between discharge and 24 months post burn. Outcomes were modeled with generalized estimating equations or using mixed linear models. Significance was accepted at p < 0.01. Responses of 167 children with a mean age of 7 ± 5 years and burns covering an average 54 ± 14% of TBSA were analyzed. Significant improvements over the 2-year period were seen in reduction of pain, itching, sleeping disturbance, tightness, range of motion, and strength (p < 0.01). There was a significantly increased persistent desire to hide the scarred body areas over time (p < 0.01). The perception of mouth scarring, inability to portray accurate facial expressions, and skin coloration did not improve over the follow-up period. According to self-assessment questionnaires, severely burned children exhibit significant improvements in their overall perception of scarring and distress. However, these patients remain self-conscious with respect to their body image even 2 years after burn injury. Implications for Rehabilitation According to self-assessment questionnaires, severely burned children perceive significant improvements in scarring and distress during the first 2 years post burn. Significant improvements were seen in reduction of pain, itching, sleeping disturbances, tightness, range of motion, and strength (p < 0.01). Burn care providers should improve the treatment of burns surrounding the mouth that with result in scarring, and develop strategies to prevent skin discoloration. Careful evaluation of pain and sleeping disorders during the first year post burn are warranted to improve the patient rehabilitation. Overall, significantly more female patients expressed a persistent desire to hide their scarred body areas. The rehabilitation team should provide access to wigs or other aids to pediatric burn survivors to address these needs.

Actinide Corroles: Synthesis and Characterization of Thorium(IV) and Uranium(IV) bis(-chloride) Dimers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, Ashleigh L.; Buckley, Heather L.; Gryko, Daniel T.

2013-12-01

The first synthesis and structural characterization of actinide corroles is presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesised and characterized by single-crystal X-ray diffraction, UV-Visible spectroscopy, variable-temperature 1H NMR, ESI mass spectrometry and cyclic voltammetry.

Recovery of actinides from actinide-aluminium alloys by chlorination: Part III - Chlorination with HCl(g)

NASA Astrophysics Data System (ADS)

Meier, Roland; Souček, Pavel; Walter, Olaf; Malmbeck, Rikard; Rodrigues, Alcide; Glatz, Jean-Paul; Fanghänel, Thomas

2018-01-01

Two steps of a pyrochemical route for the recovery of actinides from spent metallic nuclear fuel are being investigated at JRC-Karlsruhe. The first step consists in electrorefining the fuel in molten salt medium implying aluminium cathodes. The second step is a chlorination process for the separation of actinides (An) from An-Al alloys formed on the cathodes. The chlorination process, in turn, consists of three steps; the distillation of adhered salt (1), the chlorination of An-Al by HCl/Cl2 under formation of AlCl3 and An chlorides (2), and the subsequent sublimation of AlCl3 (3). In the present work UAl2, UAl3, NpAl2, and PuAl2 were chlorinated with HCl(g) in a temperature range between 300 and 400 °C forming UCl4, NpCl4 or PuCl3 as the major An containing phases, respectively. Thermodynamic calculations were carried out to support the experimental work. The results showed a high chlorination efficiency for all used starting materials and indicated that the sublimation step may not be necessary when using HCl(g).