Phase-resolved and time-averaged puff motions of an excited stack-issued transverse jet

NASA Astrophysics Data System (ADS)

Hsu, C. M.; Huang, R. F.

2013-07-01

The dynamics of puff motions in an excited stack-issued transverse jet were studied experimentally in a wind tunnel. The temporal and spatial evolution processes of the puffs induced by acoustic excitation were examined using the smoke flow visualization method and high-speed particle image velocimetry. The temporal and spatial evolutions of the puffs were examined using phase-resolved ensemble-averaged velocity fields and the velocity, length scales, and vorticity characteristics of the puffs were studied. The time-averaged velocity fields were calculated to analyze the velocity distributions and vorticity contours. The results show that a puff consists of a pair of counter-rotating vortex rings. An initial vortex ring was formed due to a concentration of vorticity at the lee side of the issuing jet at the instant of the mid-oscillation cycle. A vortex ring rotating in the opposite direction to that of the initial vortex ring was subsequently formed at the upwind side of the issuing jet. These two counter-rotating vortex rings formed a "mushroom" vortex pair, which was deflected by the crossflow and traveled downstream along a time-averaged trajectory of zero vorticity. The trajectory was situated far above the time-averaged streamline evolving from the leading edge of the tube. The velocity magnitudes of the vortex rings at the upwind and the lee side decreased with time evolution as the puffs traveled downstream due to momentum dissipation and entrainment effects. The puffs traveling along the trajectory of zero vorticity caused large velocities to appear above the leading-edge streamline.

Causality Analysis: Identifying the Leading Element in a Coupled Dynamical System

PubMed Central

BozorgMagham, Amir E.; Motesharrei, Safa; Penny, Stephen G.; Kalnay, Eugenia

2015-01-01

Physical systems with time-varying internal couplings are abundant in nature. While the full governing equations of these systems are typically unknown due to insufficient understanding of their internal mechanisms, there is often interest in determining the leading element. Here, the leading element is defined as the sub-system with the largest coupling coefficient averaged over a selected time span. Previously, the Convergent Cross Mapping (CCM) method has been employed to determine causality and dominant component in weakly coupled systems with constant coupling coefficients. In this study, CCM is applied to a pair of coupled Lorenz systems with time-varying coupling coefficients, exhibiting switching between dominant sub-systems in different periods. Four sets of numerical experiments are carried out. The first three cases consist of different coupling coefficient schemes: I) Periodic–constant, II) Normal, and III) Mixed Normal/Non-normal. In case IV, numerical experiment of cases II and III are repeated with imposed temporal uncertainties as well as additive normal noise. Our results show that, through detecting directional interactions, CCM identifies the leading sub-system in all cases except when the average coupling coefficients are approximately equal, i.e., when the dominant sub-system is not well defined. PMID:26125157

40 CFR 461.33 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.33 New source... times. (4) Subpart C—Battery Wash (Detergent)—NSPS. Pollutant or pollutant Property Maximum for any 1... day Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds...

40 CFR 461.33 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.33 New source... times. (4) Subpart C—Battery Wash (Detergent)—NSPS. Pollutant or pollutant Property Maximum for any 1... day Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds...

The Incidence of Malignant Tumors in Environmentally Disadvantaged Regions of Kazakhstan

PubMed

Mamyrbayev, Arstan; Djarkenov, Timur; Dosbayev, Askar; Dusembayeva, Nailya; Shpakov, Anatolyi; Umarova, Gulmira; Drobchenko, Yelena; Kunurkulzhayev, Temirgali; Zhaylybaev, Mukhtar; Isayeva, Gulnar

2016-12-01

Objective: To explore the prevalence of malignant tumors in the adult population through 2003-2014 in parts of the Aral Sea region: a zone of ecological disaster, a zone of ecological crisis and a zone of precritical conditions. Methods: The long-time average annual levels of cancer morbidity stratified by zones of the Aral Sea region and trends of long-time average annual incidence indicators of malignant tumors were identified. Leading cancer localizations in the adult population was established and associations between cancer incidence and environmental pollution were analyzed. In addition, associations between individual risk factors and cancer incidence in the adult population was established. Correlations between a hazard index and the cancer incidence in the adult population were calculated. Results: In all three Aral Sea regions, as well as in Zhanaarkinskii district, leading cancer in adult population was esophageal, stomach, tracheal, lung, hepatobiliary, and breast. Long-time average annual levels of cancer morbidity in adult population living in the Aral sea region is 1.5 times higher comparing to the control region. In particular, long-time average annual levels of cancer morbidity in adult population living in the zone of ecological disaster was 57.2% higher, in the zone of ecological crisis - 61.9% higher, and in the zone of precritical condition – 16.8% higher. Long-time average annual levels in the adult population of the Aral Sea region significantly exceeded control levels for brain and central nervous system cancer, cancer of bone and articular cartilage, and thyroid cancer. Conclusion: It has was established that the total cancer morbidity depended on the total hazard index associated with the inhalation of nickel and the combined cadmium intake (r=0.8). Creative Commons Attribution License

The Incidence of Malignant Tumors in Environmentally Disadvantaged Regions of Kazakhstan

PubMed Central

Mamyrbayev, Arstan; Djarkenov, Timur; Dosbayev, Askar; Dusembayeva, Nailya; Shpakov, Anatolyi; Umarova, Gulmira; Drobchenko, Yelena; Kunurkulzhayev, Temirgali; Zhaylybaev, Mukhtar; Isayeva, Gulnar

2016-01-01

Objective: To explore the prevalence of malignant tumors in the adult population through 2003-2014 in parts of the Aral Sea region: a zone of ecological disaster, a zone of ecological crisis and a zone of precritical conditions. Methods: The long-time average annual levels of cancer morbidity stratified by zones of the Aral Sea region and trends of long-time average annual incidence indicators of malignant tumors were identified. Leading cancer localizations in the adult population was established and associations between cancer incidence and environmental pollution were analyzed. In addition, associations between individual risk factors and cancer incidence in the adult population was established. Correlations between a hazard index and the cancer incidence in the adult population were calculated. Results: In all three Aral Sea regions, as well as in Zhanaarkinskii district, leading cancer in adult population was esophageal, stomach, tracheal, lung, hepatobiliary, and breast. Long-time average annual levels of cancer morbidity in adult population living in the Aral sea region is 1.5 times higher comparing to the control region. In particular, long-time average annual levels of cancer morbidity in adult population living in the zone of ecological disaster was 57.2% higher, in the zone of ecological crisis - 61.9% higher, and in the zone of precritical condition – 16.8% higher. Long-time average annual levels in the adult population of the Aral Sea region significantly exceeded control levels for brain and central nervous system cancer, cancer of bone and articular cartilage, and thyroid cancer. Conclusion: It has was established that the total cancer morbidity depended on the total hazard index associated with the inhalation of nickel and the combined cadmium intake (r=0.8). PMID:28125862

Using PBL to Prepare Educators and Emergency Managers to Plan for Severe Weather

ERIC Educational Resources Information Center

Stalker, Sarah L.; Cullen, Theresa A.; Kloesel, Kevin

2015-01-01

Within the past 10 years severe weather has been responsible for an annual average of 278 fatalities in the United States (National Weather Service, 2013). During severe weather special populations are populations of high concentrations of people that cannot respond quickly. Schools show both of these characteristics. The average lead time for…

Acoustic Effects in Classical Nucleation Theory

NASA Technical Reports Server (NTRS)

Baird, J. K.; Su, C.-H.

2017-01-01

The effect of sound wave oscillations on the rate of nucleation in a parent phase can be calculated by expanding the free energy of formation of a nucleus of the second phase in powers of the acoustic pressure. Since the period of sound wave oscillation is much shorter than the time scale for nucleation, the acoustic effect can be calculated as a time average of the free energy of formation of the nucleus. The leading non-zero term in the time average of the free energy is proportional to the square of the acoustic pressure. The Young-Laplace equation for the surface tension of the nucleus can be used to link the time average of the square of the pressure in the parent phase to its time average in the nucleus of the second phase. Due to the surface tension, the pressure in the nuclear phase is higher than the pressure in the parent phase. The effect is to lower the free energy of formation of the nucleus and increase the rate of nucleation.

40 CFR 461.33 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.33... of 7.5 to 10.0 at all times. (4) Subpart C—Battery Wash (Detergent)—NSPS. Pollutant or pollutant... Maximum for any 1 day Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English...

40 CFR 461.33 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.33... of 7.5 to 10.0 at all times. (4) Subpart C—Battery Wash (Detergent)—NSPS. Pollutant or pollutant... Maximum for any 1 day Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English...

40 CFR 461.33 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.33... of 7.5 to 10.0 at all times. (4) Subpart C—Battery Wash (Detergent)—NSPS. Pollutant or pollutant... Maximum for any 1 day Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English...

The Role of Mean-motion Resonances in Semimajor Axis Mobility of Asteroids

NASA Astrophysics Data System (ADS)

Milić Žitnik, Ivana; Novaković, Bojan

2016-01-01

Here, we report our findings about the effect of 11 two-body mean-motion resonances (MMRs) with Jupiter, on the mobility of an asteroid’s semimajor axis caused by the Yarkovsky effect. This study is accomplished using numerical integrations of test particles. The obtained results reveal that MMRs could either speed up or slow down the drift in the semimajor axis. Moreover, this allows us to determine the distribution that represents the best data obtained for time delays dtr caused by the resonances on the mobility of an asteroid. We also found a certain functional relationship that describes dependence of the average time lead/lag < {dtr}> on the strength of the resonance SR and the semimajor axis drift speed da/dt. As the Yarkovsky effect scales as 1/D, an important consequence of this relationship is that average time lead/lag < {dtr}> is directly proportional to the diameter D of an asteroid.

Thermodynamics of a time-dependent and dissipative oval billiard: A heat transfer and billiard approach.

PubMed

Leonel, Edson D; Galia, Marcus Vinícius Camillo; Barreiro, Luiz Antonio; Oliveira, Diego F M

2016-12-01

We study some statistical properties for the behavior of the average squared velocity-hence the temperature-for an ensemble of classical particles moving in a billiard whose boundary is time dependent. We assume the collisions of the particles with the boundary of the billiard are inelastic, leading the average squared velocity to reach a steady-state dynamics for large enough time. The description of the stationary state is made by using two different approaches: (i) heat transfer motivated by the Fourier law and (ii) billiard dynamics using either numerical simulations and theoretical description.

Kuru

MedlinePlus

... years afterward because the disease has a long incubation period. The incubation period is the time it takes for symptoms ... can lead to malnutrition or starvation. The average incubation period is 10 to 13 years, but incubation ...

A method for determining the weak statistical stationarity of a random process

NASA Technical Reports Server (NTRS)

Sadeh, W. Z.; Koper, C. A., Jr.

1978-01-01

A method for determining the weak statistical stationarity of a random process is presented. The core of this testing procedure consists of generating an equivalent ensemble which approximates a true ensemble. Formation of an equivalent ensemble is accomplished through segmenting a sufficiently long time history of a random process into equal, finite, and statistically independent sample records. The weak statistical stationarity is ascertained based on the time invariance of the equivalent-ensemble averages. Comparison of these averages with their corresponding time averages over a single sample record leads to a heuristic estimate of the ergodicity of a random process. Specific variance tests are introduced for evaluating the statistical independence of the sample records, the time invariance of the equivalent-ensemble autocorrelations, and the ergodicity. Examination and substantiation of these procedures were conducted utilizing turbulent velocity signals.

The need for higher-order averaging in the stability analysis of hovering, flapping-wing flight.

PubMed

Taha, Haithem E; Tahmasian, Sevak; Woolsey, Craig A; Nayfeh, Ali H; Hajj, Muhammad R

2015-01-05

Because of the relatively high flapping frequency associated with hovering insects and flapping wing micro-air vehicles (FWMAVs), dynamic stability analysis typically involves direct averaging of the time-periodic dynamics over a flapping cycle. However, direct application of the averaging theorem may lead to false conclusions about the dynamics and stability of hovering insects and FWMAVs. Higher-order averaging techniques may be needed to understand the dynamics of flapping wing flight and to analyze its stability. We use second-order averaging to analyze the hovering dynamics of five insects in response to high-amplitude, high-frequency, periodic wing motion. We discuss the applicability of direct averaging versus second-order averaging for these insects.

Experimental investigation of commercially available lead composite aprons used for diagnostic X-rays

NASA Astrophysics Data System (ADS)

Shousha, Hany A.; Rabie, N.; Hassan, G. M.

2011-12-01

One of the principal diagnostic methods used in all fields of medical services is radiographic examination. To keep the radiation dose received by hospital personnel under normal working conditions as low as reasonably achievable, lead composite apron shields are provided as valuable aids. Intensive use of these accessories could lead to softening and surface defects due to poor handling and being worn-out over time, giving rise to multiple defects across the entire apron. Without routine control, these lead aprons will, within time, contribute significantly to the over-radiation burden to the wearer. However, local defects are highly likely to lead to gross changes in the radiation dose received by the wearer. For this reason, we evaluate the exposure dose resulting from diagnostic X-ray radiation during different imaging procedures. In this study, we used TLD LiF-700 chips to measure the attenuation percentage for four groups of commercial lead composite aprons and to calculate the effective doses to different organs during diagnostic radiological procedures. The results show the importance of lead composite aprons in minimizing effective doses, and the attenuation percentage varied for different vendors; this is due to variations in the constituent material. The average attenuation for lead composite aprons varies from 93.3% to 96.7%, and the average attenuation (%)/weight varies from 16.7% to 20.5%. Acceptance testing of lead composite aprons is essential to ensure that lead composite aprons meet their manufacturers' specifications and provide the necessary radiation protection for their intended use. The combined and expanded uncertainties accompanying these measurements are 2.78% and 5.57%, respectively.

Magnetic Activity Dependence of the Electric Drift Below L = 3

NASA Astrophysics Data System (ADS)

Lejosne, Solène; Mozer, F. S.

2018-05-01

More than 2 years of magnetic and electric field measurements by the Van Allen Probes are analyzed with the objective of determining the average effects of magnetic activity on the electric drift below L = 3. The study finds that an increase in magnetospheric convection leads to a decrease in the magnitude of the azimuthal component of the electric drift, especially in the nightside. The amplitude of the slowdown is a function of L, magnetic local time, and Kp, in a pattern consistent with the storm time dynamics of the ionosphere and thermosphere. To a lesser extent, magnetic activity also alters the average radial component of the electric drift below L = 3. A global picture for the average variations of the electric drift with Kp is provided as a function of L and magnetic local time. It is the first time that the signature of the ionospheric disturbance dynamo is observed in near-equatorial electric drift measurements.

The Association of Daytime Maternal Napping and Exercise With Nighttime Sleep in First-Time Mothers Between 3 and 6 Months Postpartum.

PubMed

Lillis, Teresa A; Hamilton, Nancy A; Pressman, Sarah D; Khou, Christina S

2016-10-19

This study investigated the relationship of daytime maternal napping, exercise, caffeine, and alcohol intake to objective and subjective sleep indices. Sixty healthy, nondepressed, first-time mothers between 3 and 6 months postpartum. Seven consecutive days of online behavior diaries, sleep diaries, and wrist actigraphy, collecting Total Sleep Time (TST), Sleep Onset Latency (SOL), and Wake After Sleep Onset (WASO). After controlling for infant age, employment status, infant feeding method, and infant sleeping location, mixed linear models showed that longer average exercise durations were associated with longer average TST, and longer average nap durations were associated with longer average WASO durations. Significant within-person differences in TST and SOL were also observed, such that, on days when participants exercised and napped longer than average, their respective TST and SOL durations that night were longer. Shorter nap durations and longer exercise durations were associated with longer TST, shorter SOL, and reduced WASO. Even small changes in daily exercise and napping behaviors could lead to reliable improvements in postpartum maternal sleep.

Deriving analytic solutions for compact binary inspirals without recourse to adiabatic approximations

NASA Astrophysics Data System (ADS)

Galley, Chad R.; Rothstein, Ira Z.

2017-05-01

We utilize the dynamical renormalization group formalism to calculate the real space trajectory of a compact binary inspiral for long times via a systematic resummation of secularly growing terms. This method generates closed form solutions without orbit averaging, and the accuracy can be systematically improved. The expansion parameter is v5ν Ω (t -t0) where t0 is the initial time, t is the time elapsed, and Ω and v are the angular orbital frequency and initial speed, respectively. ν is the binary's symmetric mass ratio. We demonstrate how to apply the renormalization group method to resum solutions beyond leading order in two ways. First, we calculate the second-order corrections of the leading radiation reaction force, which involves highly nontrivial checks of the formalism (i.e., its renormalizability). Second, we show how to systematically include post-Newtonian corrections to the radiation reaction force. By avoiding orbit averaging, we gain predictive power and eliminate ambiguities in the initial conditions. Finally, we discuss how this methodology can be used to find analytic solutions to the spin equations of motion that are valid over long times.

Month-to-month and year-to-year reproducibility of high frequency QRS ECG signals

NASA Technical Reports Server (NTRS)

Batdorf, Niles J.; Feiveson, Alan H.; Schlegel, Todd T.

2004-01-01

High frequency electrocardiography analyzing the entire QRS complex in the frequency range of 150 to 250 Hz may prove useful in the detection of coronary artery disease, yet the long-term stability of these waveforms has not been fully characterized. Therefore, we prospectively investigated the reproducibility of the root mean squared voltage, kurtosis, and the presence versus absence of reduced amplitude zones in signal averaged 12-lead high frequency QRS recordings acquired in the supine position one month apart in 16 subjects and one year apart in 27 subjects. Reproducibility of root mean squared voltage and kurtosis was excellent over these time intervals in the limb leads, and acceptable in the precordial leads using both the V-lead and CR-lead derivations. The relative error of root mean squared voltage was 12% month-to-month and 16% year-to-year in the serial recordings when averaged over all 12 leads. Reduced amplitude zones were also reproducible up to a rate of 87% and 81%, respectively, for the month-to-month and year-to-year recordings. We conclude that 12-lead high frequency QRS electrocardiograms are sufficiently reproducible for clinical use.

Month-to-Month and Year-to-Year Reproducibility of High Frequency QRS ECG signals

NASA Technical Reports Server (NTRS)

Batdorf, Niles; Feiveson, Alan H.; Schlegel, Todd T.

2006-01-01

High frequency (HF) electrocardiography analyzing the entire QRS complex in the frequency range of 150 to 250 Hz may prove useful in the detection of coronary artery disease, yet the long-term stability of these waveforms has not been fully characterized. We therefore prospectively investigated the reproducibility of the root mean squared (RMS) voltage, kurtosis, and the presence versus absence of reduced amplitude zones (RAzs) in signal averaged 12-lead HF QRS recordings acquired in the supine position one month apart in 16 subjects and one year apart in 27 subjects. Reproducibility of RMS voltage and kurtosis was excellent over these time intervals in the limb leads, and acceptable in the precordial leads using both the V-lead and CR-lead derivations. The relative error of RMS voltage was 12% month-to-month and 16% year-to-year in the serial recordings when averaged over all 12 leads. RAzs were also reproducible at a rate of up to 87% and 8 1 %, respectively, for the month-to-month and year-to-year recordings. We conclude that 12-lead HF QRS electrocardiograms are sufficiently reproducible for clinical use.

Lead in tissues of mallard ducks dosed with two types of lead shot

USGS Publications Warehouse

Finley, M.T.; Dieter, M.P.; Locke, L.N.

1976-01-01

Mallard ducks (Anas platyrhynchos) were sacrificed one month after ingesting one number 4 all-lead shot or one number 4 lead-iron shot. Livers, kidneys, blood, wingbones, and eggs were analyzed for lead by atomic absorption. Necropsy of sacrificed ducks failed to reveal any of the tissue lesions usually associated with lead poisoning in waterfowl. Lead levels in ducks given all-lead shot averaged about twice those in ducks given lead-iron shot, reflecting the amount of lead in the two types of shot. Lead in the blood of ducks dosed with all-lead shot averaged 0.64 ppm, and 0.28 ppm in ducks given lead-iron shot. Lead residues in livers and kidneys of females given all-lead shot were significantly higher than in males. In both dosed groups, lead levels in wingbones of females were about 10 times those in males, and were significantly correlated with the number of eggs laid after dosage. Lead levels in contents and shells of eggs laid by hens dosed with all-lead shot were about twice those in eggs laid by hens dosed with lead-iron shot. Eggshells were found to best reflect levels of lead in the blood. Our results indicate that mallards maintained on a balanced diet and dosed with one lead shot may not accumulate extremely high lead levels in the liver and kidney. However, extremely high lead deposition may result in the bone of laying hens after ingesting sublethal amounts of lead shot as a result of mobilization of calcium from the bone during eggshell formation.

Beyond long memory in heart rate variability: An approach based on fractionally integrated autoregressive moving average time series models with conditional heteroscedasticity

NASA Astrophysics Data System (ADS)

Leite, Argentina; Paula Rocha, Ana; Eduarda Silva, Maria

2013-06-01

Heart Rate Variability (HRV) series exhibit long memory and time-varying conditional variance. This work considers the Fractionally Integrated AutoRegressive Moving Average (ARFIMA) models with Generalized AutoRegressive Conditional Heteroscedastic (GARCH) errors. ARFIMA-GARCH models may be used to capture and remove long memory and estimate the conditional volatility in 24 h HRV recordings. The ARFIMA-GARCH approach is applied to fifteen long term HRV series available at Physionet, leading to the discrimination among normal individuals, heart failure patients, and patients with atrial fibrillation.

The Relation between Relaxation Time, Mean Free Path, Collision Time and Drift Velocity--Pitfalls and a Proposal for an Approach Illustrating the Essentials

ERIC Educational Resources Information Center

Jakoby, Bernhard

2009-01-01

The collision model is frequently introduced to describe electronic conductivity in solids. Depending on the chosen approach, the introduction of the collision time can lead to erroneous results for the average velocity of the electrons, which enters the expression for the electrical conductivity. In other textbooks, correct results are obtained…

Correlation analysis of the long latency auditory evoked potential N2 and cognitive P3 with the level of lead poisoning in children

PubMed Central

Alvarenga, Kátia de Freitas; Alvarez Bernardez-Braga, Gabriela Rosito; Zucki, Fernanda; Duarte, Josilene Luciene; Lopes, Andrea Cintra; Feniman, Mariza Ribeiro

2013-01-01

Summary Introduction: The effects of lead on children's health have been widely studied. Aim: To analyze the correlation between the long latency auditory evoked potential N2 and cognitive P3 with the level of lead poisoning in Brazilian children. Methods: This retrospective study evaluated 20 children ranging in age from 7 to 14 years at the time of audiological and electrophysiological evaluations. We performed periodic surveys of the lead concentration in the blood and basic audiological evaluations. Furthermore, we studied the auditory evoked potential long latency N2 and cognitive P3 by analyzing the absolute latency of the N2 and P3 potentials and the P3 amplitude recorded at Cz. At the time of audiological and electrophysiological evaluations, the average concentration of lead in the blood was less than 10 ug/dL. Results: In conventional audiologic evaluations, all children had hearing thresholds below 20 dBHL for the frequencies tested and normal tympanometry findings; the auditory evoked potential long latency N2 and cognitive P3 were present in 95% of children. No significant correlations were found between the blood lead concentration and latency (p = 0.821) or amplitude (p = 0.411) of the P3 potential. However, the latency of the N2 potential increased with the concentration of lead in the blood, with a significant correlation (p = 0.030). Conclusion: Among Brazilian children with low lead exposure, a significant correlation was found between blood lead levels and the average latency of the auditory evoked potential long latency N2; however, a significant correlation was not observed for the amplitude and latency of the cognitive potential P3. PMID:25991992

Application of Lean Sigma to the Audiology Clinic at a Large Academic Center.

PubMed

Huddle, Matthew G; Tirabassi, Amy; Turner, Laurie; Lee, Emily; Ries, Kathryn; Lin, Sandra Y

2016-04-01

To apply Lean Sigma--a quality improvement strategy to eliminate waste and reduce variation and defects--to improve audiology scheduling and utilization in a large tertiary care referral center. The project goals included an increase in utilization rates of audiology block time and a reduction in appointment lead time. Prospective quality improvement study. Academic tertiary care center. All patients scheduling audiology clinic visits July 2013 to July 2014. Value stream mapping was performed for the audiology scheduling process, and wasteful steps were identified for elimination. Interventions included a 2-week block release, audiology template revision, and reduction of underutilized blocks. Schedule utilization and lead time for new patient diagnostic audiogram were measured for 5 months postintervention and compared with 5 months preintervention. Overall, 2995 preintervention and 3714 postintervention booked appointments were analyzed. Block utilization increased from 77% to 90% after intervention (P < .0001). Utilization of joint-with-provider visits increased from 39% to 67% (P < .0001). Booked appointments increased from 2995 to 3714, with joint-with-provider booked appointments increasing from 317 to 1193. Appointment lead time averaged 24 days postintervention, compared with 29 days preintervention (P = .06). Average monthly relative value units measured 13,321 preintervention and 14,778 postintervention (P = .09). Lean Sigma techniques were successfully used to increase appointment block utilization and streamline scheduling practices. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Mountain erosion over decades and millennia: New insights from sediment yields and cosmogenic nuclides

NASA Astrophysics Data System (ADS)

Callahan, R. P.; Riebe, C. S.; Ferrier, K.

2017-12-01

For more than two decades, cosmogenic nuclides have been used to quantify catchment-wide erosion rates averaged over tens of thousands of years. These rates have been used as baselines for comparison with sediment yields averaged over decades, leading to insights on how human activities such as deforestation and agriculture have influenced the production and delivery of sediment to streams and oceans. Here we present new data from the southern Sierra Nevada, California, where sediment yields have been measured over the last ten years using sediment trapping and gauging methods. Cosmogenic nuclides measured in stream sediment reveal erosion rates that are between 13 and 400 (average = 94) times faster than erosion rates inferred from annual accumulations in sediment traps. We show that the discrepancy can be explained by extremely low sediment trapping efficiency, which leads to bias in the short-term rates due to incomplete capture of suspended sediment. Thus the short-term rates roughly agree with the long-term rates, despite intensive timber harvesting in the study catchments over the last century. This differs from results obtained in similar forested granitic catchments of Idaho, where long-term rates are more than ten times greater than short-term rates because large, rare events do not contribute to the short-term averages. Our analysis of a global database indicates that both the magnitude and sign of differences between short- and long-term average erosion rates are difficult to predict, even when the history of land use in known.

Lead concentrations in bullfrog Rana catesbeiana and green frog R. clamitans tadpoles inhabiting highway drainages

USGS Publications Warehouse

Birdsall, C.W.; Grue, C.E.; Anderson, A.

1986-01-01

Lead concentrations were determined in sediment and tadpoles of bullfrogs Rana catesbeiana and green frogs R. clamitans from drainages along highways with different daily average traffic volumes (range, 4272 to I08,800 vehicles day-I) and from ponds >0.4 km from the nearest highway. Lead concentrations (mg kg--I dry weight) in sediment (7-8 to 940) were usually greater (4-5 times) than those in the tadpoles (bullfrog, 0,07 to 270; green frog, 0,90 to 240 mg kg-I). Lead concentrations in sediment (r =0.63) and in both species of tadpoles (bullfrog, r = 0.69; green frog, r = 0.57) were positively correlated with average daily traffic volume. Lead concentrations in both species of tadpoles (bullfrog, r = (). 76: green frog, r = 0.75) were also positively correlated with lead concentrations in sediment. At sites where both bullfrog and green frog tadpoles were collected. lead concentrations in the two species were closely related (r = 0.84). Lead concentrations in tadpoles living near highways may contribute to the elevated lead levels reported in wildlife that are potential tadpole predators. Dietary lead concentrations similar to those in our tadpoles have been associated with physiological and reproductive effects in some species of birds and mammals. However, additional data are needed to determine the hazards to predators of lead concentrations in tadpoles.

Acquisition Program Lead Systems Integration/Lead Capabilities Integration Decision Support Methodology and Tool

DTIC Science & Technology

2015-04-30

from the MIT Sloan School that provide a relative complexity score for functions (Product and Context Complexity). The PMA assesses the complexity...collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources...gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or

Reducing the metabolic cost of walking with an ankle exoskeleton: interaction between actuation timing and power.

PubMed

Galle, Samuel; Malcolm, Philippe; Collins, Steven Hartley; De Clercq, Dirk

2017-04-27

Powered ankle-foot exoskeletons can reduce the metabolic cost of human walking to below normal levels, but optimal assistance properties remain unclear. The purpose of this study was to test the effects of different assistance timing and power characteristics in an experiment with a tethered ankle-foot exoskeleton. Ten healthy female subjects walked on a treadmill with bilateral ankle-foot exoskeletons in 10 different assistance conditions. Artificial pneumatic muscles assisted plantarflexion during ankle push-off using one of four actuation onset timings (36, 42, 48 and 54% of the stride) and three power levels (average positive exoskeleton power over a stride, summed for both legs, of 0.2, 0.4 and 0.5 W∙kg -1 ). We compared metabolic rate, kinematics and electromyography (EMG) between conditions. Optimal assistance was achieved with an onset of 42% stride and average power of 0.4 W∙kg -1 , leading to 21% reduction in metabolic cost compared to walking with the exoskeleton deactivated and 12% reduction compared to normal walking without the exoskeleton. With suboptimal timing or power, the exoskeleton still reduced metabolic cost, but substantially less so. The relationship between timing, power and metabolic rate was well-characterized by a two-dimensional quadratic function. The assistive mechanisms leading to these improvements included reducing muscular activity in the ankle plantarflexors and assisting leg swing initiation. These results emphasize the importance of optimizing exoskeleton actuation properties when assisting or augmenting human locomotion. Our optimal assistance onset timing and average power levels could be used for other exoskeletons to improve assistance and resulting benefits.

Incorporating measures of time-varying emissions to enhance top-down BC emissions: what is done well, what needs improvement, and what are the consequences

NASA Astrophysics Data System (ADS)

Cohen, J. B.; Xi, X.; Wang, C.

2012-12-01

Black Carbon (BC) and other absorbing aerosols uniquely impact the climate system by both scattering and absorbing solar radiation, leading to simultaneous heating and cooling of the climate system. A critical understanding of the emissions, processing, transport, and removal of these aerosols are necessary to increase our understanding of their impacts on climate system. However, BC is tricky to model: it has a mostly anthropogenic origin that is highly variable in both space and time. Furthermore, its atmospheric chemical and physical processing involves interaction with third-party chemical species. Finally, there is a strong correlation between uncertainty in prediction of the primary removal mechanism, precipitation, and those regions having the highest emissions, such as Monsoon regions of Asia. Recent work using a coupled climate/radiation/aerosol/urbanization model, data of BC concentrations and remotely sensed AAODs from more than 100 different sites, and a Kalman Filter, has lead to an average estimate of the BC average and uncertainty range of emissions. These average results ranged from about 200% to 300% the emissions currently used by the IPCC, AEROCOM, and GFED. The differences in the modeled concentrations, AAODs, radiative forcings, and climate response between these annual average different emissions levels, as well as the error bounds associated with the Kalman Filter emissions has been explored and will be summarized. Additionally, since absorbing aerosols are regionally and temporally non-uniform, an improved comparison between these differences will be highlighted using an additional data source: MISR AOD and a new analysis technique to mathematically constrain and identify unique temporally and spatially varying properties. These new constraints will be further combined with model runs under the different emissions scenarios to test the impacts of both annual average as well as more realistic cases of large-scale, season-to-season, and year-to-year variations. These results will be displayed, compared against measurements, and the influence of the time-varying component quantified both globally as well as over two regions exhibiting such an influence. It is hoped that such quantification can lead to further improvement of the emissions estimates and their impact on the climate system.

Use of Six Sigma Methodology to Reduce Appointment Lead-Time in Obstetrics Outpatient Department.

PubMed

Ortiz Barrios, Miguel A; Felizzola Jiménez, Heriberto

2016-10-01

This paper focuses on the issue of longer appointment lead-time in the obstetrics outpatient department of a maternal-child hospital in Colombia. Because of extended appointment lead-time, women with high-risk pregnancy could develop severe complications in their health status and put their babies at risk. This problem was detected through a project selection process explained in this article and to solve it, Six Sigma methodology has been used. First, the process was defined through a SIPOC diagram to identify its input and output variables. Second, six sigma performance indicators were calculated to establish the process baseline. Then, a fishbone diagram was used to determine the possible causes of the problem. These causes were validated with the aid of correlation analysis and other statistical tools. Later, improvement strategies were designed to reduce appointment lead-time in this department. Project results evidenced that average appointment lead-time reduced from 6,89 days to 4,08 days and the deviation standard dropped from 1,57 days to 1,24 days. In this way, the hospital will serve pregnant women faster, which represents a risk reduction of perinatal and maternal mortality.

Forecasting coconut production in the Philippines with ARIMA model

NASA Astrophysics Data System (ADS)

Lim, Cristina Teresa

2015-02-01

The study aimed to depict the situation of the coconut industry in the Philippines for the future years applying Autoregressive Integrated Moving Average (ARIMA) method. Data on coconut production, one of the major industrial crops of the country, for the period of 1990 to 2012 were analyzed using time-series methods. Autocorrelation (ACF) and partial autocorrelation functions (PACF) were calculated for the data. Appropriate Box-Jenkins autoregressive moving average model was fitted. Validity of the model was tested using standard statistical techniques. The forecasting power of autoregressive moving average (ARMA) model was used to forecast coconut production for the eight leading years.

The spreading time in SIS epidemics on networks

NASA Astrophysics Data System (ADS)

He, Zhidong; Van Mieghem, Piet

2018-03-01

In a Susceptible-Infected-Susceptible (SIS) process, we investigate the spreading time Tm, which is the time when the number of infected nodes in the metastable state is first reached, starting from the outbreak of the epidemics. We observe that the spreading time Tm resembles a lognormal-like distribution, though with different deep tails, both for the Markovian and the non-Markovian infection process, which implies that the spreading time can be very long with a relatively high probability. In addition, we show that a stronger virus, with a higher effective infection rate τ or an earlier timing of the infection attempts, does not always lead to a shorter average spreading time E [Tm ] . We numerically demonstrate that the average spreading time E [Tm ] in the complete graph and the star graph scales logarithmically as a function of the network size N for a fixed fraction of infected nodes in the metastable state.

Dynamic time warping-based averaging framework for functional near-infrared spectroscopy brain imaging studies

NASA Astrophysics Data System (ADS)

Zhu, Li; Najafizadeh, Laleh

2017-06-01

We investigate the problem related to the averaging procedure in functional near-infrared spectroscopy (fNIRS) brain imaging studies. Typically, to reduce noise and to empower the signal strength associated with task-induced activities, recorded signals (e.g., in response to repeated stimuli or from a group of individuals) are averaged through a point-by-point conventional averaging technique. However, due to the existence of variable latencies in recorded activities, the use of the conventional averaging technique can lead to inaccuracies and loss of information in the averaged signal, which may result in inaccurate conclusions about the functionality of the brain. To improve the averaging accuracy in the presence of variable latencies, we present an averaging framework that employs dynamic time warping (DTW) to account for the temporal variation in the alignment of fNIRS signals to be averaged. As a proof of concept, we focus on the problem of localizing task-induced active brain regions. The framework is extensively tested on experimental data (obtained from both block design and event-related design experiments) as well as on simulated data. In all cases, it is shown that the DTW-based averaging technique outperforms the conventional-based averaging technique in estimating the location of task-induced active regions in the brain, suggesting that such advanced averaging methods should be employed in fNIRS brain imaging studies.

Integrating stochastic time-dependent travel speed in solution methods for the dynamic dial-a-ride problem.

PubMed

Schilde, M; Doerner, K F; Hartl, R F

2014-10-01

In urban areas, logistic transportation operations often run into problems because travel speeds change, depending on the current traffic situation. If not accounted for, time-dependent and stochastic travel speeds frequently lead to missed time windows and thus poorer service. Especially in the case of passenger transportation, it often leads to excessive passenger ride times as well. Therefore, time-dependent and stochastic influences on travel speeds are relevant for finding feasible and reliable solutions. This study considers the effect of exploiting statistical information available about historical accidents, using stochastic solution approaches for the dynamic dial-a-ride problem (dynamic DARP). The authors propose two pairs of metaheuristic solution approaches, each consisting of a deterministic method (average time-dependent travel speeds for planning) and its corresponding stochastic version (exploiting stochastic information while planning). The results, using test instances with up to 762 requests based on a real-world road network, show that in certain conditions, exploiting stochastic information about travel speeds leads to significant improvements over deterministic approaches.

Central sleep apnea detection from ECG-derived respiratory signals. Application of multivariate recurrence plot analysis.

PubMed

Maier, C; Dickhaus, H

2010-01-01

This study examines the suitability of recurrence plot analysis for the problem of central sleep apnea (CSA) detection and delineation from ECG-derived respiratory (EDR) signals. A parameter describing the average length of vertical line structures in recurrence plots is calculated at a time resolution of 1 s as 'instantaneous trapping time'. Threshold comparison of this parameter is used to detect ongoing CSA. In data from 26 patients (duration 208 h) we assessed sensitivity for detection of CSA and mixed apnea (MSA) events by comparing the results obtained from 8-channel Holter ECGs to the annotations (860 CSA, 480 MSA) of simultaneously registered polysomnograms. Multivariate combination of the EDR from different ECG leads improved the detection accuracy significantly. When all eight leads were considered, an average instantaneous vertical line length above 5 correctly identified 1126 of the 1340 events (sensitivity 84%) with a total number of 1881 positive detections. We conclude that recurrence plot analysis is a promising tool for detection and delineation of CSA epochs from EDR signals with high time resolution. Moreover, the approach is likewise applicable to directly measured respiratory signals.

Mobilisation of heavy metals into the urine by CaEDTA: relation to erythrocyte and plasma concentrations and exposure indicators.

PubMed

Araki, S; Aono, H; Murata, K

1986-09-01

To investigate the effects of calcium disodium ethylenediamine tetra-acetate (CaEDTA) on the urinary excretion, erythrocyte, and plasma concentrations and exposure indicators of seven heavy metals, CaEDTA was administered by intravenous infusion to 20 workers exposed to lead, zinc, and copper. The workers' blood lead concentrations ranged from 22 to 59 micrograms/dl (mean 38 micrograms/dl (1.8 mumol/l]. The 24 hour urinary excretion of metals after CaEDTA administration (mobilisation yield) was on average 13 times the background excretion for lead, 11 times for zinc, 3.8 times for manganese, 3.4 times for cadmium, 1.3 times for copper, and 1.1 times for chromium; no significant increase was found for mercury. The mobilisation yield of lead (MPb) was significantly correlated with whole blood and erythrocyte concentrations and the urinary excretion of lead but not with its plasma concentration; similarly, the mobilisation yield of cadmium was significantly correlated with its erythrocyte concentration. In addition, MPb was significantly correlated with intra-erythrocytic enzyme delta-aminolaevulinic acid dehydratase activity and urinary coproporphyrin excretion. The relation between the mobilisation yield of heavy metals and their body burden (and toxic signs) is discussed in the light of these findings.

Mobilisation of heavy metals into the urine by CaEDTA: relation to erythrocyte and plasma concentrations and exposure indicators.

PubMed Central

Araki, S; Aono, H; Murata, K

1986-01-01

To investigate the effects of calcium disodium ethylenediamine tetra-acetate (CaEDTA) on the urinary excretion, erythrocyte, and plasma concentrations and exposure indicators of seven heavy metals, CaEDTA was administered by intravenous infusion to 20 workers exposed to lead, zinc, and copper. The workers' blood lead concentrations ranged from 22 to 59 micrograms/dl (mean 38 micrograms/dl (1.8 mumol/l]. The 24 hour urinary excretion of metals after CaEDTA administration (mobilisation yield) was on average 13 times the background excretion for lead, 11 times for zinc, 3.8 times for manganese, 3.4 times for cadmium, 1.3 times for copper, and 1.1 times for chromium; no significant increase was found for mercury. The mobilisation yield of lead (MPb) was significantly correlated with whole blood and erythrocyte concentrations and the urinary excretion of lead but not with its plasma concentration; similarly, the mobilisation yield of cadmium was significantly correlated with its erythrocyte concentration. In addition, MPb was significantly correlated with intra-erythrocytic enzyme delta-aminolaevulinic acid dehydratase activity and urinary coproporphyrin excretion. The relation between the mobilisation yield of heavy metals and their body burden (and toxic signs) is discussed in the light of these findings. PMID:3092853

Photographic Identification of Humpback and Blue Whales off the US West Coast: Results and Updated Abundance Estimates from 2008 Field Season

DTIC Science & Technology

2009-12-01

1990s and only being present part of the time off the US West Coast lowering the average density present (but not reflecting an actual population ...the average density present (but not reflecting an actual population decline). 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...due to our sample representing a decreasing proportion of this growing population leading to greater variation and possibly greater susceptibility to

The lead time tradeoff: the case of health states better than dead.

PubMed

Pinto-Prades, José Luis; Rodríguez-Míguez, Eva

2015-04-01

Lead time tradeoff (L-TTO) is a variant of the time tradeoff (TTO). L-TTO introduces a lead period in full health before illness onset, avoiding the need to use 2 different procedures for states better and worse than dead. To estimate utilities, additive separability is assumed. We tested to what extent violations of this assumption can bias utilities estimated with L-TTO. A sample of 500 members of the Spanish general population evaluated 24 health states, using face-to-face interviews. A total of 188 subjects were interviewed with L-TTO and the rest with TTO. Both samples evaluated the same set of 24 health states, divided into 4 groups with 6 health states per set. Each subject evaluated 1 of the sets. A random effects regression model was fitted to our data. Only health states better than dead were included in the regression since it is in this subset where additive separability can be tested clearly. Utilities were higher in L-TTO in relation to TTO (on average L-TTO adds about 0.2 points to the utility of health states), suggesting that additive separability is violated. The difference between methods increased with the severity of the health state. Thus, L-TTO adds about 0.14 points to the average utility of the less severe states, 0.23 to the intermediate states, and 0.28 points to the more severe estates. L-TTO produced higher utilities than TTO. Health problems are perceived as less severe if a lead period in full health is added upfront, implying that there are interactions between disjointed time periods. The advantages of this method have to be compared with the cost of modeling the interaction between periods. © The Author(s) 2014.

Pulse charging of lead-acid traction cells

NASA Technical Reports Server (NTRS)

Smithrick, J. J.

1980-01-01

Pulse charging, as a method of rapidly and efficiently charging 300 amp-hour lead-acid traction cells for an electric vehicle application was investigated. A wide range of charge pulse current square waveforms were investigated and the results were compared to constant current charging at the time averaged pulse current values. Representative pulse current waveforms were: (1) positive waveform-peak charge pulse current of 300 amperes (amps), discharge pulse-current of zero amps, and a duty cycle of about 50%; (2) Romanov waveform-peak charge pulse current of 300 amps, peak discharge pulse current of 15 amps, and a duty of 50%; and (3) McCulloch waveform peak charge pulse current of 193 amps, peak discharge pulse current of about 575 amps, and a duty cycle of 94%. Experimental results indicate that on the basis of amp-hour efficiency, pulse charging offered no significant advantage as a method of rapidly charging 300 amp-hour lead-acid traction cells when compared to constant current charging at the time average pulse current value. There were, however, some disadvantages of pulse charging in particular a decrease in charge amp-hour and energy efficiencies and an increase in cell electrolyte temperature. The constant current charge method resulted in the best energy efficiency with no significant sacrifice of charge time or amp-hour output. Whether or not pulse charging offers an advantage over constant current charging with regard to the cell charge/discharge cycle life is unknown at this time.

Technological innovation in spinal cord stimulation: use of a newly developed delivery device for introduction of spinal cord stimulation leads.

PubMed

Logé, David; De Coster, Olivier; Washburn, Stephanie

2012-07-01

The use of multiple cylindrical leads and multicolumn and single column paddle leads in spinal cord stimulation offers many advantages over the use of a single cylindrical lead. Despite these advantages, placement of multiple cylindrical leads or a paddle lead requires a more invasive surgical procedure. Thus, the ideal situation for lead delivery would be percutaneous insertion of a paddle lead or multiple cylindrical leads. This study evaluated the feasibility and safety of percutaneous delivery of S-Series paddle leads using a new delivery device called the Epiducer lead delivery system (all St. Jude Medical Neuromodulation Division, Plano, TX, USA). This uncontrolled, open-label, prospective, two-center study approved by the AZ St. Lucas (Ghent) Ethics Committee evaluated procedural aspects of implantation of an S-Series paddle lead using the Epiducer lead delivery system and any adverse events relating to the device. Efficacy data during the patent's 30-day trial also were collected.   Data from 34 patients were collected from two investigational sites. There were no adverse events related to the Epiducer lead delivery system. The device was inserted at an angle of either 20°-30° or 30°-40° and was entered into the epidural space at T12/L1 in most patients. The S-Series paddle lead was advanced four vertebral segments in more than 50% of patients. The average (±standard deviation [SD]) time it took to place the Epiducer lead delivery system was 8.7 (±5.0) min. The average (+SD) patient-reported pain relief was 78.8% (+24.1%). This study suggests the safe use of the Epiducer lead delivery system for percutaneous implantation and advancement of the S-Series paddle lead in 34 patients. © 2012 International Neuromodulation Society.

Cause Resolving of Typhoon Precipitation Using Principle Component Analysis under Complex Interactive Effect of Terrain, Monsoon and Typhoon Vortex

NASA Astrophysics Data System (ADS)

Huang, C. L.; Hsu, N. S.

2015-12-01

This study develops a novel methodology to resolve the cause of typhoon-induced precipitation using principle component analysis (PCA) and to develop a long lead-time precipitation prediction model. The discovered spatial and temporal features of rainfall are utilized to develop a state-of-the-art descriptive statistical model which can be used to predict long lead-time precipitation during typhoons. The time series of 12-hour precipitation from different types of invasive moving track of typhoons are respectively precede the signal analytical process to qualify the causes of rainfall and to quantify affected degree of each induced cause. The causes include: (1) interaction between typhoon rain band and terrain; (2) co-movement effect induced by typhoon wind field with monsoon; (3) pressure gradient; (4) wind velocity; (5) temperature environment; (6) characteristic distance between typhoon center and surface target station; (7) distance between grade 7 storm radius and surface target station; and (8) relative humidity. The results obtained from PCA can detect the hidden pattern of the eight causes in space and time and can understand the future trends and changes of precipitation. This study applies the developed methodology in Taiwan Island which is constituted by complex diverse terrain formation and height. Results show that: (1) for the typhoon moving toward the direction of 245° to 330°, Causes (1), (2) and (6) are the primary ones to generate rainfall; and (2) for the direction of 330° to 380°, Causes (1), (4) and (6) are the primary ones. Besides, the developed precipitation prediction model by using PCA with the distributed moving track approach (PCA-DMT) is 32% more accurate by that of PCA without distributed moving track approach, and the former model can effectively achieve long lead-time precipitation prediction with an average predicted error of 13% within average 48 hours of forecasted lead-time.

Arsenic, cadmium, lead, and zinc in the Danville and Springfield coal members (Pennsylvanian) from Indiana

USGS Publications Warehouse

Mastalerz, Maria; Drobniak, A.

2007-01-01

Arsenic, cadmium, lead, and zinc contents and distributions are discussed in two major Pennsylvanian coal beds in Indiana: the Danville Coal Member and the Springfield Coal Member. Arsenic contents of the Danville and Springfield coals show similar ranges from 0.5 to 43??ppm for the Danville Coal and 1 to 50??ppm for the Springfield Coal, with an average of 12.7??ppm for the Danville and 9.4??ppm for the Springfield Coal. Cadmium concentrations do not exceed 9??ppm, with an average of 0.4 for Danville and 0.7??ppm for the Springfield. Average Pb contents are 21.3 and 6.3??ppm, whereas Zn contents are 101 and 54??ppm for the Danville and the Springfield, respectively. The distribution of these elements varies both laterally and vertically within the coals, as functions of their mineral associations and the time of their emplacement. ?? 2006 Elsevier B.V. All rights reserved.

Mechanistic approach to generalized technical analysis of share prices and stock market indices

NASA Astrophysics Data System (ADS)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

In Vivo Anomalous Diffusion and Weak Ergodicity Breaking of Lipid Granules

NASA Astrophysics Data System (ADS)

Jeon, Jae-Hyung; Tejedor, Vincent; Burov, Stas; Barkai, Eli; Selhuber-Unkel, Christine; Berg-Sørensen, Kirstine; Oddershede, Lene; Metzler, Ralf

2011-01-01

Combining extensive single particle tracking microscopy data of endogenous lipid granules in living fission yeast cells with analytical results we show evidence for anomalous diffusion and weak ergodicity breaking. Namely we demonstrate that at short times the granules perform subdiffusion according to the laws of continuous time random walk theory. The associated violation of ergodicity leads to a characteristic turnover between two scaling regimes of the time averaged mean squared displacement. At longer times the granule motion is consistent with fractional Brownian motion.

A Community Health Approach to Asthma in the Schools

ERIC Educational Resources Information Center

Weiss-Randall, Debra

2014-01-01

Asthma is a leading cause of school absenteeism in the United States, especially in poor and minority communities, where prevalence and hospitalization rates are significantly higher than average. A community health approach can help poorer school districts hire full-time nurses and access other health resources.

Maxima of two random walks: Universal statistics of lead changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Naim, E.; Krapivsky, P. L.; Randon-Furling, J.

2016-04-18

In this study, we investigate statistics of lead changes of the maxima of two discrete-time random walks in one dimension. We show that the average number of lead changes grows asmore » $${\\pi }^{-1}\\mathrm{ln}t$$ in the long-time limit. We present theoretical and numerical evidence that this asymptotic behavior is universal. Specifically, this behavior is independent of the jump distribution: the same asymptotic underlies standard Brownian motion and symmetric Lévy flights. We also show that the probability to have at most n lead changes behaves as $${t}^{-1/4}{(\\mathrm{ln}t)}^{n}$$ for Brownian motion and as $${t}^{-\\beta (\\mu )}{(\\mathrm{ln}t)}^{n}$$ for symmetric Lévy flights with index μ. The decay exponent $$\\beta \\equiv \\beta (\\mu )$$ varies continuously with the Lévy index when $$0\\lt \\mu \\lt 2$$, and remains constant $$\\beta =1/4$$ for $$\\mu \\gt 2$$.« less

Quantitative analysis of backbone dynamics in a crystalline protein from nitrogen-15 spin-lattice relaxation.

PubMed

Giraud, Nicolas; Blackledge, Martin; Goldman, Maurice; Böckmann, Anja; Lesage, Anne; Penin, François; Emsley, Lyndon

2005-12-28

A detailed analysis of nitrogen-15 longitudinal relaxation times in microcrystalline proteins is presented. A theoretical model to quantitatively interpret relaxation times is developed in terms of motional amplitude and characteristic time scale. Different averaging schemes are examined in order to propose an analysis of relaxation curves that takes into account the specificity of MAS experiments. In particular, it is shown that magic angle spinning averages the relaxation rate experienced by a single spin over one rotor period, resulting in individual relaxation curves that are dependent on the orientation of their corresponding carousel with respect to the rotor axis. Powder averaging thus leads to a nonexponential behavior in the observed decay curves. We extract dynamic information from experimental decay curves, using a diffusion in a cone model. We apply this study to the analysis of spin-lattice relaxation rates of the microcrystalline protein Crh at two different fields and determine differential dynamic parameters for several residues in the protein.

The ceramics industry and lead poisoning. Long-term testing.

PubMed

De Rosa, E; Rossi, A; Toffolo, D; Brighenti, F; Rosa, A; Caroldi, S

1980-12-01

The investigation evaluates the efficiency attributed to some measures (improvements in environment, individual health habits) in reducing the risk of lead poisoning in the ceramics industry. The evaluation of the average levels of lead in the blood of 154 exposed workers was carried out in four plants at a time interval of six to eight months. The study considers the variations in relation to possible measures brought about during the interval. A reduction of environmental risk was in effect shown by a clear improvement in the blood lead levels, which still, however, exceeded the internationally recommended limits in many of the subjects. It was concluded that further improvements can only be made by reducing the lead content of the glazes used.

Real-time OHT Dispatching Mechanism for the Interbay Automated Material Handling System with Shortcuts and Bypasses

NASA Astrophysics Data System (ADS)

Pan, Cong; Zhang, Jie; Qin, Wei

2017-05-01

As a key to improve the performance of the interbay automated material handling system (AMHS) in 300 mm semiconductor wafer fabrication system, the real-time overhead hoist transport (OHT) dispatching problem has received much attention. This problem is first formulated as a special form of assignment problem and it is proved that more than one solution will be obtained by Hungarian algorithm simultaneously. Through proposing and strictly proving two propositions related to the characteristics of these solutions, a modified Hungarian algorithm is designed to distinguish these solutions. Finally, a new real-time OHT dispatching method is carefully designed by implementing the solution obtained by the modified Hungarian algorithm. The experimental results of discrete event simulations show that, compared with conventional Hungarian algorithm dispatching method, the proposed dispatching method that chooses the solution with the maximum variance respectively reduces on average 4 s of the average waiting time and average lead time of wafer lots, and its performance is rather stable in multiple different scenarios of the interbay AMHS with different quantities of shortcuts. This research provides an efficient real-time OHT dispatching mechanism for the interbay AMHS with shortcuts and bypasses.

Reciprocal Relationships between Teacher Ratings of Internalizing and Externalizing Behaviors in Adolescents with Different Levels of Cognitive Abilities.

PubMed

Morin, Alexandre J S; Arens, A Katrin; Maïano, Christophe; Ciarrochi, Joseph; Tracey, Danielle; Parker, Philip D; Craven, Rhonda G

2017-04-01

Are internalizing and externalizing behavior problems interrelated via mutually reinforcing relationships (with each behavior leading to increases over time in levels of the other behavior) or mutually suppressing relationships (with each behavior leading to decreases over time in levels of the other behavior)? Past research on the directionality of these relationships has led to ambiguous results, particularly in adolescence. Furthermore, the extent to which prior results will generalize to adolescents with low levels of cognitive abilities remains unknown. This second limit is particularly important, given that these adolescents are known to present higher levels of externalizing and internalizing behaviors than their peers with average-to-high levels of cognitive abilities, and that the mechanisms involved in the reciprocal relationships between these two types of behaviors may differ across both populations. This study examines the directionality of the longitudinal relationships between externalizing and internalizing behavior problems as rated by teachers across three measurement waves (corresponding to Grades 8-10) in matched samples of 138 adolescents (34.78 % girls) with low levels of cognitive abilities and 556 adolescents (44.88 % girls) with average-to-high levels of cognitive abilities. The results showed that the measurement structure was fully equivalent across time periods and groups of adolescents, revealing high levels of developmental stability in both types of problems, and moderately high levels of cross-sectional associations. Levels of both internalizing and externalizing behaviors were higher among adolescents with low levels of cognitive abilities relative to those with average-to-high levels of cognitive abilities. Finally, the predictive analyses revealed negative reciprocal longitudinal relationships (i.e., mutually suppressing relationships) between externalizing and internalizing problems, a result that was replicated within samples of adolescents with low, and average-to-high levels of cognitive ability.

Direct Measurements of Smartphone Screen-Time: Relationships with Demographics and Sleep.

PubMed

Christensen, Matthew A; Bettencourt, Laura; Kaye, Leanne; Moturu, Sai T; Nguyen, Kaylin T; Olgin, Jeffrey E; Pletcher, Mark J; Marcus, Gregory M

2016-01-01

Smartphones are increasingly integrated into everyday life, but frequency of use has not yet been objectively measured and compared to demographics, health information, and in particular, sleep quality. The aim of this study was to characterize smartphone use by measuring screen-time directly, determine factors that are associated with increased screen-time, and to test the hypothesis that increased screen-time is associated with poor sleep. We performed a cross-sectional analysis in a subset of 653 participants enrolled in the Health eHeart Study, an internet-based longitudinal cohort study open to any interested adult (≥ 18 years). Smartphone screen-time (the number of minutes in each hour the screen was on) was measured continuously via smartphone application. For each participant, total and average screen-time were computed over 30-day windows. Average screen-time specifically during self-reported bedtime hours and sleeping period was also computed. Demographics, medical information, and sleep habits (Pittsburgh Sleep Quality Index-PSQI) were obtained by survey. Linear regression was used to obtain effect estimates. Total screen-time over 30 days was a median 38.4 hours (IQR 21.4 to 61.3) and average screen-time over 30 days was a median 3.7 minutes per hour (IQR 2.2 to 5.5). Younger age, self-reported race/ethnicity of Black and "Other" were associated with longer average screen-time after adjustment for potential confounders. Longer average screen-time was associated with shorter sleep duration and worse sleep-efficiency. Longer average screen-times during bedtime and the sleeping period were associated with poor sleep quality, decreased sleep efficiency, and longer sleep onset latency. These findings on actual smartphone screen-time build upon prior work based on self-report and confirm that adults spend a substantial amount of time using their smartphones. Screen-time differs across age and race, but is similar across socio-economic strata suggesting that cultural factors may drive smartphone use. Screen-time is associated with poor sleep. These findings cannot support conclusions on causation. Effect-cause remains a possibility: poor sleep may lead to increased screen-time. However, exposure to smartphone screens, particularly around bedtime, may negatively impact sleep.

Integrating stochastic time-dependent travel speed in solution methods for the dynamic dial-a-ride problem

PubMed Central

Schilde, M.; Doerner, K.F.; Hartl, R.F.

2014-01-01

In urban areas, logistic transportation operations often run into problems because travel speeds change, depending on the current traffic situation. If not accounted for, time-dependent and stochastic travel speeds frequently lead to missed time windows and thus poorer service. Especially in the case of passenger transportation, it often leads to excessive passenger ride times as well. Therefore, time-dependent and stochastic influences on travel speeds are relevant for finding feasible and reliable solutions. This study considers the effect of exploiting statistical information available about historical accidents, using stochastic solution approaches for the dynamic dial-a-ride problem (dynamic DARP). The authors propose two pairs of metaheuristic solution approaches, each consisting of a deterministic method (average time-dependent travel speeds for planning) and its corresponding stochastic version (exploiting stochastic information while planning). The results, using test instances with up to 762 requests based on a real-world road network, show that in certain conditions, exploiting stochastic information about travel speeds leads to significant improvements over deterministic approaches. PMID:25844013

Periodical capacity setting methods for make-to-order multi-machine production systems

PubMed Central

Altendorfer, Klaus; Hübl, Alexander; Jodlbauer, Herbert

2014-01-01

The paper presents different periodical capacity setting methods for make-to-order, multi-machine production systems with stochastic customer required lead times and stochastic processing times to improve service level and tardiness. These methods are developed as decision support when capacity flexibility exists, such as, a certain range of possible working hours a week for example. The methods differ in the amount of information used whereby all are based on the cumulated capacity demand at each machine. In a simulation study the methods’ impact on service level and tardiness is compared to a constant provided capacity for a single and a multi-machine setting. It is shown that the tested capacity setting methods can lead to an increase in service level and a decrease in average tardiness in comparison to a constant provided capacity. The methods using information on processing time and customer required lead time distribution perform best. The results found in this paper can help practitioners to make efficient use of their flexible capacity. PMID:27226649

Time of travel and dispersion of solutes in a 36.4-mile reach of the North Platte River downstream from Casper, Wyoming

USGS Publications Warehouse

Armentrout, G.W.; Larson, L.R.

1984-01-01

Time-of-travel and dispersion measurements made during a dye study November 7-8, 1978, are presented for a reach of the North Platte River from Casper, Wyo., to a bridge 2 miles downstream from below the Dave Johnston Power Plant. Rhodamine WT dye was injected into the river at Casper, and the resultant dye cloud was traced by sampling as it moved downstream. Samples were taken in three equal-flow sections of the river 's lateral transect at three sites, then analyzed in a fluorometer. The flow in the river was 940 cubic feet per second. The data consist of measured stream mileages and time, distance, and concentration graphs of the dye cloud. The peak concentration traveled through the reach in 24 hours, averaging 1.5 miles per hour; the leading edge took about 22 hours, averaging 1.7 miles per hour; and the trailing edge took 35 hours, averaging 1.0 mile per hour. Data from this study were compared with methods for estimating time of travel for a range of stream discharges.

Personality Traits Associated with Occupational "Burnout" in ABA Therapists

ERIC Educational Resources Information Center

Hurt, Amy A.; Grist, Cathy Lann; Malesky, Lann A., Jr.; McCord, David M.

2013-01-01

Background: Applied behaviour analysis (ABA) therapists typically work one-to-one with children with autism for extended periods of time, which often leads to high levels of job-related stress, lower levels of job satisfaction, increased frequency of occupational "burnout" and higher than average job turnover (Journal of Autism…

Computational Electromagnetic Analysis in a Human Head Model with EEG Electrodes and Leads Exposed to RF-Field Sources at 915 MHz and 1748 MHz

PubMed Central

Angelone, Leonardo M.; Bit-Babik, Giorgi; Chou, Chung-Kwang

2010-01-01

An electromagnetic analysis of a human head with EEG electrodes and leads exposed to RF-field sources was performed by means of Finite-Difference Time-Domain simulations on a 1-mm3 MRI-based human head model. RF-field source models included a half-wave dipole, a patch antenna, and a realistic CAD-based mobile phone at 915 MHz and 1748 MHz. EEG electrodes/leads models included two configurations of EEG leads, both a standard 10–20 montage with 19 electrodes and a 32-electrode cap, and metallic and high resistive leads. Whole-head and peak 10-g average SAR showed less than 20% changes with and without leads. Peak 1-g and 10-g average SARs were below the ICNIRP and IEEE guideline limits. Conversely, a comprehensive volumetric assessment of changes in the RF field with and without metallic EEG leads showed an increase of two orders of magnitude in single-voxel power absorption in the epidermis and a 40-fold increase in the brain during exposure to the 915 MHz mobile phone. Results varied with the geometry and conductivity of EEG electrodes/leads. This enhancement confirms the validity of the question whether any observed effects in studies involving EEG recordings during RF-field exposure are directly related to the RF fields generated by the source or indirectly to the RF-field-induced currents due to the presence of conductive EEG leads. PMID:20681803

40 CFR 421.256 - Pretreatment standards for new sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for any 1 day Maximum for monthly average mg/troy ounce of gold refined electrolytically Lead 5.544 2... Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0.364 0.169 Mercury 0.195 0.078... Maximum for monthly average mg/troy ounce of silver reduced in solution Lead 0.112 0.052 Mercury 0.060 0...

40 CFR 421.256 - Pretreatment standards for new sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0.364 0.169 Mercury 0.195 0.078... Maximum for monthly average mg/troy ounce of silver reduced in solution Lead 0.112 0.052 Mercury 0.060 0... for any 1 day Maximum for monthly average mg/troy ounce of gold refined electrolytically Lead 5.544 2...

40 CFR 421.113 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Maximum for monthly average mg/kg (pounds per million pounds) of concentrate digested Lead .174 .081 Zinc... monthly average mg/Kg (pounds per million pounds) of concentrate digested Lead 2.592 1.203 Zinc 9.442 3... Maximum for monthly average mg/kg (pounds per million pounds) of concentrate digested Lead .069 .032 Zinc...

40 CFR 421.113 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Maximum for monthly average mg/kg (pounds per million pounds) of concentrate digested Lead .174 .081 Zinc... monthly average mg/Kg (pounds per million pounds) of concentrate digested Lead 2.592 1.203 Zinc 9.442 3... Maximum for monthly average mg/kg (pounds per million pounds) of concentrate digested Lead .069 .032 Zinc...

Warp-averaging event-related potentials.

PubMed

Wang, K; Begleiter, H; Porjesz, B

2001-10-01

To align the repeated single trials of the event-related potential (ERP) in order to get an improved estimate of the ERP. A new implementation of the dynamic time warping is applied to compute a warp-average of the single trials. The trilinear modeling method is applied to filter the single trials prior to alignment. Alignment is based on normalized signals and their estimated derivatives. These features reduce the misalignment due to aligning the random alpha waves, explaining amplitude differences in latency differences, or the seemingly small amplitudes of some components. Simulations and applications to visually evoked potentials show significant improvement over some commonly used methods. The new implementation of the dynamic time warping can be used to align the major components (P1, N1, P2, N2, P3) of the repeated single trials. The average of the aligned single trials is an improved estimate of the ERP. This could lead to more accurate results in subsequent analysis.

Spectral narrowing and spin echo for localized carriers with heavy-tailed L evy distribution of hopping times

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Z.; Mkhitaryan, Vagharsh; Raikh, M. E.

2016-02-02

We study analytically the free induction decay and the spin echo decay originating from the localized carriers moving between the sites which host random magnetic fields. Due to disorder in the site positions and energies, the on-site residence times, , are widely spread according to the L evy distribution. The power-law tail ∝ τ -1-∝ in the distribution of does not affect the conventional spectral narrowing for α > 2, but leads to a dramatic acceleration of the free induction decay in the domain 2 > α > 1. The next abrupt acceleration of the decay takes place as becomesmore » smaller than 1. In the latter domain the decay does not follow a simple-exponent law. To capture the behavior of the average spin in this domain, we solve the evolution equation for the average spin using the approach different from the conventional approach based on the Laplace transform. Unlike the free induction decay, the tail in the distribution of the residence times leads to the slow decay of the spin echo. The echo is dominated by realizations of the carrier motion for which the number of sites, visited by the carrier, is minimal.« less

The anatomy of a freezing lead

NASA Astrophysics Data System (ADS)

Gow, Anthony J.; Meese, Debra A.; Perovich, Donald K.; Tucker, Walter B.

1990-10-01

Winter leads are regions of intense ice growth with resultant large fluxes of heat to the atmosphere and salt to the ocean. They constitute a major source of new ice in the Arctic basin. During the 1988 drift phase of the Coordinated Eastern Arctic Experiment we were afforded a unique opportunity to conduct a detailed, long-term study of a freezing lead. Measurements were made from September 17 to November 18, during which time the ice grew from open water to a thickness of 0.56 m. Cores were removed from the lead ice on a routine basis and analyzed for ice temperature, salinity, density, and structure. From these measurements the derived quantities of brine volume, porosity, heat flux to the atmosphere, and salt flux to the ocean were computed. In addition to this 2-month time series study of ice cores, the spatial variation in lead ice properties was investigated on September 30. Thin-section studies of ice structure indicated that the upper 0.05-0.15 m of the ice sheet was granular and that the lower portion was columnar. Typically, a portion of the granular layer was snow ice. Once the transition from granular to columnar ice had occurred, granular ice did not reappear. As the ice grew thicker the c axes of the ice crystals became aligned within the horizontal plane. This alignment direction corresponded closely with the inferred direction of the current at the ice/water interface. Vertical temperature profiles in the ice were approximately linear. Salinity profiles were usually C-shaped with bulk salinities ranging from 9 to 6‰, before stabilizing at 6‰ for ice thicker than 0.35 m. Core data were used to compute the flux of heat to the atmosphere and the flux of salt to the ocean for seven time intervals during the experiment. Heat fluxes ranged from 89 to 29 W/m2 with an average of 50 W m-2, roughly 3 times the corresponding value from multiyear ice. The flux of salt from the lead ice to the ocean varied from 0.51 to 0.06 kg m-2 d-1, averaging 0.21 kg m-2 d-1.

Assessing computerized eye tracking technology for gaining insight into expert interpretation of the 12-lead electrocardiogram: an objective quantitative approach.

PubMed

Bond, R R; Zhu, T; Finlay, D D; Drew, B; Kligfield, P D; Guldenring, D; Breen, C; Gallagher, A G; Daly, M J; Clifford, G D

2014-01-01

It is well known that accurate interpretation of the 12-lead electrocardiogram (ECG) requires a high degree of skill. There is also a moderate degree of variability among those who interpret the ECG. While this is the case, there are no best practice guidelines for the actual ECG interpretation process. Hence, this study adopts computerized eye tracking technology to investigate whether eye-gaze can be used to gain a deeper insight into how expert annotators interpret the ECG. Annotators were recruited in San Jose, California at the 2013 International Society of Computerised Electrocardiology (ISCE). Each annotator was recruited to interpret a number of 12-lead ECGs (N=12) while their eye gaze was recorded using a Tobii X60 eye tracker. The device is based on corneal reflection and is non-intrusive. With a sampling rate of 60Hz, eye gaze coordinates were acquired every 16.7ms. Fixations were determined using a predefined computerized classification algorithm, which was then used to generate heat maps of where the annotators looked. The ECGs used in this study form four groups (3=ST elevation myocardial infarction [STEMI], 3=hypertrophy, 3=arrhythmias and 3=exhibiting unique artefacts). There was also an equal distribution of difficulty levels (3=easy to interpret, 3=average and 3=difficult). ECGs were displayed using the 4x3+1 display format and computerized annotations were concealed. Precisely 252 expert ECG interpretations (21 annotators×12 ECGs) were recorded. Average duration for ECG interpretation was 58s (SD=23). Fleiss' generalized kappa coefficient (Pa=0.56) indicated a moderate inter-rater reliability among the annotators. There was a 79% inter-rater agreement for STEMI cases, 71% agreement for arrhythmia cases, 65% for the lead misplacement and dextrocardia cases and only 37% agreement for the hypertrophy cases. In analyzing the total fixation duration, it was found that on average annotators study lead V1 the most (4.29s), followed by leads V2 (3.83s), the rhythm strip (3.47s), II (2.74s), V3 (2.63s), I (2.53s), aVL (2.45s), V5 (2.27s), aVF (1.74s), aVR (1.63s), V6 (1.39s), III (1.32s) and V4 (1.19s). It was also found that on average the annotator spends an equal amount of time studying leads in the frontal plane (15.89s) when compared to leads in the transverse plane (15.70s). It was found that on average the annotators fixated on lead I first followed by leads V2, aVL, V1, II, aVR, V3, rhythm strip, III, aVF, V5, V4 and V6. We found a strong correlation (r=0.67) between time to first fixation on a lead and the total fixation duration on each lead. This indicates that leads studied first are studied the longest. There was a weak negative correlation between duration and accuracy (r=-0.2) and a strong correlation between age and accuracy (r=0.67). Eye tracking facilitated a deeper insight into how expert annotators interpret the 12-lead ECG. As a result, the authors recommend ECG annotators to adopt an initial first impression/pattern recognition approach followed by a conventional systematic protocol to ECG interpretation. This recommendation is based on observing misdiagnoses given due to first impression only. In summary, this research presents eye gaze results from expert ECG annotators and provides scope for future work that involves exploiting computerized eye tracking technology to further the science of ECG interpretation. Copyright © 2014 Elsevier Inc. All rights reserved.

Return to play after anterior cruciate ligament reconstruction in major league baseball athletes.

PubMed

Fabricant, Peter D; Chin, Christopher S; Conte, Stan; Coleman, Struan H; Pearle, Andrew D; Dines, Joshua S

2015-05-01

The purpose of the study was to (1) investigate the rate of return to play among Major League Baseball (MLB) athletes after anterior cruciate ligament reconstruction (ACLR), (2) determine the impact of ACL injury on ability to perform baseball-specific planting and pivoting tasks (batting and stealing bases), and (3) to explore the effect of the injured side on these metrics. ACL injury data from 1999 to 2012 were compiled, along with player performance statistics recorded for players with at least 30 games before ACL injury. Predictor variables included side of injury and outcome variables focused on batting average, stolen bases, and number of times caught stealing before injury and after surgery. Twenty-three of 26 (88%) players were able to return to at least 30 games after ACLR, although they experienced a decline of 21.2% in number of games played (P = .004). Those who had a ACLR for a rear batting leg injury averaged a 12.3% decline in batting average, whereas those who had ACLR for a lead leg injury had a 6.4% increase in batting average (P = .04). Side of injury was not predictive of stolen base metrics. The overall rate of return to play among MLB position players after ACLR was 88%, although there was a 21.2% decline in the number of games played postoperatively. Injury to the rear batting leg resulted in a lower returning batting average compared with an injury to the lead batting leg. Side of injury had no effect on stolen bases or on the number of times a player was caught stealing. Level IV, therapeutic case series. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Average-atom treatment of relaxation time in x-ray Thomson scattering from warm dense matter.

PubMed

Johnson, W R; Nilsen, J

2016-03-01

The influence of finite relaxation times on Thomson scattering from warm dense plasmas is examined within the framework of the average-atom approximation. Presently most calculations use the collision-free Lindhard dielectric function to evaluate the free-electron contribution to the Thomson cross section. In this work, we use the Mermin dielectric function, which includes relaxation time explicitly. The relaxation time is evaluated by treating the average atom as an impurity in a uniform electron gas and depends critically on the transport cross section. The calculated relaxation rates agree well with values inferred from the Ziman formula for the static conductivity and also with rates inferred from a fit to the frequency-dependent conductivity. Transport cross sections determined by the phase-shift analysis in the average-atom potential are compared with those evaluated in the commonly used Born approximation. The Born approximation converges to the exact cross sections at high energies; however, differences that occur at low energies lead to corresponding differences in relaxation rates. The relative importance of including relaxation time when modeling x-ray Thomson scattering spectra is examined by comparing calculations of the free-electron dynamic structure function for Thomson scattering using Lindhard and Mermin dielectric functions. Applications are given to warm dense Be plasmas, with temperatures ranging from 2 to 32 eV and densities ranging from 2 to 64 g/cc.

Average-atom treatment of relaxation time in x-ray Thomson scattering from warm dense matter

DOE PAGES

Johnson, W. R.; Nilsen, J.

2016-03-14

Here, the influence of finite relaxation times on Thomson scattering from warm dense plasmas is examined within the framework of the average-atom approximation. Presently most calculations use the collision-free Lindhard dielectric function to evaluate the free-electron contribution to the Thomson cross section. In this work, we use the Mermin dielectric function, which includes relaxation time explicitly. The relaxation time is evaluated by treating the average atom as an impurity in a uniform electron gas and depends critically on the transport cross section. The calculated relaxation rates agree well with values inferred from the Ziman formula for the static conductivity andmore » also with rates inferred from a fit to the frequency-dependent conductivity. Transport cross sections determined by the phase-shift analysis in the average-atom potential are compared with those evaluated in the commonly used Born approximation. The Born approximation converges to the exact cross sections at high energies; however, differences that occur at low energies lead to corresponding differences in relaxation rates. The relative importance of including relaxation time when modeling x-ray Thomson scattering spectra is examined by comparing calculations of the free-electron dynamic structure function for Thomson scattering using Lindhard and Mermin dielectric functions. Applications are given to warm dense Be plasmas, with temperatures ranging from 2 to 32 eV and densities ranging from 2 to 64 g/cc.« less

Temporal fluctuation of the lead level in the cord blood of neonates in Taipei.

PubMed

Hwang, Y H; Wang, J D

1990-01-01

From August 1985 to September 1987, 9,502 cord blood samples were obtained from the Taipei Municipal Maternal and Child Hospital. A total of 205 cord blood samples chosen randomly from newborns without parental exposure to lead were analyzed by flameless atomic absorption spectrophotometry. The average blood lead level was .36 +/- .11 mumol/l (7.48 +/- 2.25 micrograms/dl). A similar analysis was performed on samples obtained from 160 newborns whose fathers had occupational lead exposure. In both groups, the average concentration of lead in cord blood in the summer was statistically greater than that in the winter. Air lead and total amount of lead in gasoline consumed in Taipei appeared to be associated with this seasonal fluctuation in the average lead level of cord blood. After considering alternative sources, we conclude that the seasonal fluctuation of cord blood lead is probably influenced by air lead produced from the combustion of gasoline.

Controlling Laser Plasma Instabilities Using Temporal Bandwidths Under Shock Ignition Relevant Conditions

NASA Astrophysics Data System (ADS)

Tsung, Frank; Weaver, J.; Lehmberg, R.

2017-10-01

We are performing particle-in-cell simulations using the code OSIRIS to study the effects of laser plasma interactions in the presence of temporal bandwidth under plasma conditions relevant to experiments on the Nike laser with induced spatial incoherence (ISI). With ISI, the instantaneous laser intensity can be 3-4 times larger than the average intensity, leading to the excitation of additional TPD modes and producing electrons with larger angular spread. In our simulations, we observe that although ISI can increase the interaction regions for short bursts of time, time-averaged (over many pico-seconds) laser plasma interactions can be reduced by a factor of 2 in systems with sufficiently large bandwidths (where the inverse bandwidth is comparable with the linear growth time). We will quantify these effects and investigate higher dimensional effects such as laser speckles and the effects of Coulomb collisions. Work supported by NRL, NNSA, and NSF.

New Information on Lead in Dirt and Dust as Related to the Childhood Lead Problem

PubMed Central

Haar, Gary Ter; Aronow, Regine

1974-01-01

It has been known for many years that the eating of leaded paint is the prime cause of lead poisoning and elevated blood leads of children living in deteriorated housing. Recently, there has been speculation that children may eat dirt and dust contaminated with lead exhausted from cars and that this amount of ingested lead is sufficient to contribute significantly to the childhood lead problem. This paper reports on a twopart study conducted to evaluate the validity of the dirt-and-dust hypotheses. The first part of the study was made to determine the source of lead in dirt to which children are normally exposed. Dirt samples were taken in old urban areas around 18 painted frame houses and 18 houses of brick construction. Samples also were taken around seven old frame farmhouses remote from traffic. Based on the fact that lead concentrations in the dirt were similar in city and rural yards at corresponding distances from the houses, it is clear that nearly all of the lead in dirt around these houses is due to paint from the houses. Lead antiknock additives are therefore not a significant contributor to the lead content of dirt around houses where children usually play. The second part of the study used a naturally occurring radioactive tracer 210Pb to determine the relative amounts of dust and other lead-containing materials (e.g., paint) eaten by young children. This tracer is present in very low concentrations in paint and in significantly higher concentrations in fallout dust. Stable lead and 210Pb were analyzed in fecal material from eight children suspected of having elevated body burdens of lead and ten children living in good housing where lead poisoning is not a problem. The normal children averaged 4 μg Pb/g dry feces, with a range of 2 to 7. Of the eight children suspected of having elevated lead body burdens, two had fecal lead values within the normal range. However, the remaining six were 4 to 400 times as high. Despite these differences in fecal lead between the two groups, the groups were essentially identified in the 210Pb content of their feces. The “elevated” children averaged 0.040 pCi of 210Pb dry feces, while the normal group averaged 0.044 pCi/g. The results provide sound evidence that these children suspected of elevated lead body burden were not ingesting dust or air-suspended particulate. PMID:4831152

Progress on Establishing the Feasibility of Lead Slowing Down Spectroscopy for Direct Measurement of Plutonium in Used Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulisek, Jonathan A.; Anderson, Kevin K.; Bowyer, Sonya M.

2012-07-19

Developing a method for the accurate, direct, and independent assay of the fissile isotopes in bulk materials (such as used fuel) of next-generation domestic nuclear fuel cycles is a goal of the Office of Nuclear Energy, Fuel Cycle R&D, Material Protection and Control Technology (MPACT) Campaign. To meet this goal, MPACT continues to support a multi-institutional collaboration to address the feasibility of Lead Slowing Down Spectroscopy (LSDS) as an active nondestructive assay method that has the potential to provide independent, direct measurement of Pu and U isotopic masses in used fuel with an uncertainty considerably lower than the approximately 10%more » typical of today’s confirmatory assay methods. An LSDS is comprised of a stack of lead (typically 1-6 m3) in which materials to be measured are placed in the lead and a pulse of neutrons is injected. The neutrons in this pulse lose energy due to inelastic and (subsequently) elastic scattering and the average energy of the neutrons decreases as the time increases by a well-defined relationship. In the interrogation energy region (~0.1-1000 eV) the neutrons have little energy spread (~30%) about the average neutron energy. Due to this characteristic, the energy of the (assay) neutrons can then be determined by measuring the time elapsed since the neutron pulse. By measuring the induced fission neutrons emitted from the used fuel, it is possible to determine isotopic-mass content by unfolding the unique structure of isotopic resonances across the interrogation energy region. This paper will present efforts on the development of time-spectral analysis algorithms, fast neutron detector advances, and validation and testing measurements.« less

Past, Present & Future of the US EPA: Protecting Human Health & the Natural Environment

EPA Science Inventory

The time line of events that lead to the creation of the US EPA are marked by grassroots efforts by average citizens voicing concerns to politicians in Washington. Visionary leadership by Congress and the President led to the birth of a Federal Agency dedicated to protecting huma...

Wildfire suppression cost forecasts from the US Forest Service

Treesearch

Karen L. Abt; Jeffrey P. Prestemon; Krista M. Gebert

2009-01-01

The US Forest Service and other land-management agencies seek better tools for nticipating future expenditures for wildfire suppression. We developed regression models for forecasting US Forest Service suppression spending at 1-, 2-, and 3-year lead times. We compared these models to another readily available forecast model, the 10-year moving average model,...

Increasing Intelligence in Inter-Vehicle Communications to Reduce Traffic Congestions: Experiments in Urban and Highway Environments.

PubMed

Meneguette, Rodolfo I; Filho, Geraldo P R; Guidoni, Daniel L; Pessin, Gustavo; Villas, Leandro A; Ueyama, Jó

2016-01-01

Intelligent Transportation Systems (ITS) rely on Inter-Vehicle Communication (IVC) to streamline the operation of vehicles by managing vehicle traffic, assisting drivers with safety and sharing information, as well as providing appropriate services for passengers. Traffic congestion is an urban mobility problem, which causes stress to drivers and economic losses. In this context, this work proposes a solution for the detection, dissemination and control of congested roads based on inter-vehicle communication, called INCIDEnT. The main goal of the proposed solution is to reduce the average trip time, CO emissions and fuel consumption by allowing motorists to avoid congested roads. The simulation results show that our proposed solution leads to short delays and a low overhead. Moreover, it is efficient with regard to the coverage of the event and the distance to which the information can be propagated. The findings of the investigation show that the proposed solution leads to (i) high hit rate in the classification of the level of congestion, (ii) a reduction in average trip time, (iii) a reduction in fuel consumption, and (iv) reduced CO emissions.

Increasing Intelligence in Inter-Vehicle Communications to Reduce Traffic Congestions: Experiments in Urban and Highway Environments

PubMed Central

Filho, Geraldo P. R.; Guidoni, Daniel L.; Pessin, Gustavo; Villas, Leandro A.; Ueyama, Jó

2016-01-01

Intelligent Transportation Systems (ITS) rely on Inter-Vehicle Communication (IVC) to streamline the operation of vehicles by managing vehicle traffic, assisting drivers with safety and sharing information, as well as providing appropriate services for passengers. Traffic congestion is an urban mobility problem, which causes stress to drivers and economic losses. In this context, this work proposes a solution for the detection, dissemination and control of congested roads based on inter-vehicle communication, called INCIDEnT. The main goal of the proposed solution is to reduce the average trip time, CO emissions and fuel consumption by allowing motorists to avoid congested roads. The simulation results show that our proposed solution leads to short delays and a low overhead. Moreover, it is efficient with regard to the coverage of the event and the distance to which the information can be propagated. The findings of the investigation show that the proposed solution leads to (i) high hit rate in the classification of the level of congestion, (ii) a reduction in average trip time, (iii) a reduction in fuel consumption, and (iv) reduced CO emissions PMID:27526048

Fate of a mutation in a fluctuating environment

PubMed Central

Cvijović, Ivana; Good, Benjamin H.; Jerison, Elizabeth R.; Desai, Michael M.

2015-01-01

Natural environments are never truly constant, but the evolutionary implications of temporally varying selection pressures remain poorly understood. Here we investigate how the fate of a new mutation in a fluctuating environment depends on the dynamics of environmental variation and on the selective pressures in each condition. We find that even when a mutation experiences many environmental epochs before fixing or going extinct, its fate is not necessarily determined by its time-averaged selective effect. Instead, environmental variability reduces the efficiency of selection across a broad parameter regime, rendering selection unable to distinguish between mutations that are substantially beneficial and substantially deleterious on average. Temporal fluctuations can also dramatically increase fixation probabilities, often making the details of these fluctuations more important than the average selection pressures acting on each new mutation. For example, mutations that result in a trade-off between conditions but are strongly deleterious on average can nevertheless be more likely to fix than mutations that are always neutral or beneficial. These effects can have important implications for patterns of molecular evolution in variable environments, and they suggest that it may often be difficult for populations to maintain specialist traits, even when their loss leads to a decline in time-averaged fitness. PMID:26305937

A theory of post-stall transients in axial compression systems. I - Development of equations

NASA Technical Reports Server (NTRS)

Moore, F. K.; Greitzer, E. M.

1985-01-01

An approximate theory is presented for post-stall transients in multistage axial compression systems. The theory leads to a set of three simultaneous nonlinear third-order partial differential equations for pressure rise, and average and disturbed values of flow coefficient, as functions of time and angle around the compressor. By a Galerkin procedure, angular dependence is averaged, and the equations become first order in time. These final equations are capable of describing the growth and possible decay of a rotating-stall cell during a compressor mass-flow transient. It is shown how rotating-stall-like and surgelike motions are coupled through these equations, and also how the instantaneous compressor pumping characteristic changes during the transient stall process.

Reoperation for suboptimal outcomes after deep brain stimulation surgery.

PubMed

Ellis, Tina-Marie; Foote, Kelly D; Fernandez, Hubert H; Sudhyadhom, Atchar; Rodriguez, Ramon L; Zeilman, Pamela; Jacobson, Charles E; Okun, Michael S

2008-10-01

To examine a case series of reoperations for deep brain stimulation (DBS) leads in which clinical scenarios revealed suboptimal outcome from a previous operation. Suboptimally placed DBS leads are one potential reason for unsatisfactory results after surgery for Parkinson's disease (PD), essential tremor (ET), or dystonia. In a previous study of patients who experienced suboptimal results, 19 of 41 patients had misplaced leads. Similarly, another report commented that lead placement beyond a 2- to 3-mm window resulted in inadequate clinical benefit, and, in 1 patient, revision improved outcome. The goal of the current study was to perform an unblinded retrospective chart review of DBS patients with unsatisfactory outcomes who presented for reoperation. Patients who had DBS lead replacements after reoperation were assessed with the use of a retrospective review of an institutional review board-approved movement disorders database. Cases of reoperation for suboptimal clinical benefit were included, and cases of replacement of DBS leads caused by infection or hardware malfunction were excluded. Data points studied included age, disease duration, diagnosis, motor outcomes (the Unified Parkinson Disease Rating Scale III in PD, the Tremor Rating Scale in ET, and the Unified Dystonia Rating Scale in dystonia), quality of life (Parkinson's Disease Questionnaire-39 in PD), and the Clinician Global Impression scale. The data from before and after reoperation were examined to determine the estimated impact of repeat surgery. There were 11 patients with PD, 7 with ET, and 4 with dystonia. The average age of the PD group was 52 years, the disease duration was 10 years, and the average vector distance of the location of the active DBS contact was adjusted 5.5 mm. Six patients (54%) with PD had preoperative off medication on DBS Unified Parkinson Disease Rating Scale scores that could be compared with postoperative off medication on DBS scores. The average improvement across this group of patients was 24.4%. The Parkinson's Disease Questionnaire-39 improved in the areas of mobility (28.18), activities of daily living (14.77), emotion (14.72), stigma (17.61), and discomfort (17.42). The average age of the ET group was 66 years, the disease duration was 29 years, and the average adjusted distance was 6.1 mm. Five ET patients (83.3%) in the cohort had a prereplacement on DBS Tremor Rating Scale and a postreplacement on DBS Tremor Rating Scale with the average improvement of 60.4%. The average age of the dystonia group was 39 years, the average disease duration was 7 years, and the average adjusted lead distance was 6.7 mm. Three patients (75%) with dystonia had prereplacement on DBS Unified Dystonia Rating Scale and postreplacement on DBS Unified Dystonia Rating Scale scores. Across these 3 dystonia patients, the improvement was 12.8%. Clinician Global Impression scale scores (1, very much improved; 2, much improved; 3, minimally improved; 4, no change; 5, minimally worse; 6, much worse; 7, very much worse) after replacement revealed the following results in patients with PD: 1, 7 patients; 2, 3 patients; 3, 1 patient); with ET (1, 4 patients; 2, 3 patients); and with dystonia (1, 1 patient; 2, 2 patients; 3, 1 patient). The latency from original lead placement to reoperation (repositioning/revision) overall was 28.9 months (range, 2-104 mo); however, in leads referred from outside institutions (n = 11 patients), this latency was 48 months (range, 12-104 mo) compared with leads implanted by surgeons from the University of Florida (n = 11 patients), which was 9.7 months (range, 2-19 mo). The most common clinical history was failure to achieve a perceived outcome; however, history of an asymmetric benefit was present in 4 (18.2%) of 22 patients, and lead migration was present in 3 (13.6%) of 22 patients. There are many potential causes of suboptimal benefit after DBS. Timely identification of suboptimal lead placements followed by reoperation and repositioning/replacement in a subset of patients may improve outcomes.

40 CFR 464.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0771 0.0421 Lead (T) 0.0791 0.039 Zinc (T) 0.114 0.0431 Maximum for any 1 day Maximum for monthly average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.77 0.42 0.017 Lead (T) 0.79 0.39 0.022 Zinc (T) 1...

40 CFR 464.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0771 0.0421 Lead (T) 0.0791 0.039 Zinc (T) 0.114 0.0431 Maximum for any 1 day Maximum for monthly average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.77 0.42 0.017 Lead (T) 0.79 0.39 0.022 Zinc (T) 1...

Time and Teaching

NASA Astrophysics Data System (ADS)

Zielinski, Theresa Julia; Brooks, David W.; Crippen, Kent J.; March, Joe L.

2001-06-01

Time management is an important issue for teachers and students. This article discusses teachers' use of time from the perspective of curriculum and instruction. Average high school students spend fewer than 5 hours per week in outside-of-class study; average college students spend about 20 hours. Procrastination, often viewed in a negative light by teachers, usually pays off so well for college students that seniors become better at it than freshmen. Three suggestions for designing instruction are: test early and often; do not waste the best students' time in an effort to improve overall performance; and use engaging activities that motivate students to give of their time. The impact of computers on curricula is a double-edged sword. Time must be devoted to teaching the use of applications, but the programs reduce busywork. Will this turn out to be a simple tradeoff, or will the programs make us much more efficient so that less time is required? Will computer programs ultimately lead to an expanded criterion for expertise, thus demanding even more time to become an expert? These issues are described and suggestions for controlling time during instruction are provided.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, Haitao, E-mail: liaoht@cae.ac.cn

The direct differentiation and improved least squares shadowing methods are both developed for accurately and efficiently calculating the sensitivity coefficients of time averaged quantities for chaotic dynamical systems. The key idea is to recast the time averaged integration term in the form of differential equation before applying the sensitivity analysis method. An additional constraint-based equation which forms the augmented equations of motion is proposed to calculate the time averaged integration variable and the sensitivity coefficients are obtained as a result of solving the augmented differential equations. The application of the least squares shadowing formulation to the augmented equations results inmore » an explicit expression for the sensitivity coefficient which is dependent on the final state of the Lagrange multipliers. The LU factorization technique to calculate the Lagrange multipliers leads to a better performance for the convergence problem and the computational expense. Numerical experiments on a set of problems selected from the literature are presented to illustrate the developed methods. The numerical results demonstrate the correctness and effectiveness of the present approaches and some short impulsive sensitivity coefficients are observed by using the direct differentiation sensitivity analysis method.« less

Efficient sensitivity analysis method for chaotic dynamical systems

NASA Astrophysics Data System (ADS)

Liao, Haitao

2016-05-01

The direct differentiation and improved least squares shadowing methods are both developed for accurately and efficiently calculating the sensitivity coefficients of time averaged quantities for chaotic dynamical systems. The key idea is to recast the time averaged integration term in the form of differential equation before applying the sensitivity analysis method. An additional constraint-based equation which forms the augmented equations of motion is proposed to calculate the time averaged integration variable and the sensitivity coefficients are obtained as a result of solving the augmented differential equations. The application of the least squares shadowing formulation to the augmented equations results in an explicit expression for the sensitivity coefficient which is dependent on the final state of the Lagrange multipliers. The LU factorization technique to calculate the Lagrange multipliers leads to a better performance for the convergence problem and the computational expense. Numerical experiments on a set of problems selected from the literature are presented to illustrate the developed methods. The numerical results demonstrate the correctness and effectiveness of the present approaches and some short impulsive sensitivity coefficients are observed by using the direct differentiation sensitivity analysis method.

Natural convection in a vertical plane channel: DNS results for high Grashof numbers

NASA Astrophysics Data System (ADS)

Kiš, P.; Herwig, H.

2014-07-01

The turbulent natural convection of a gas ( Pr = 0.71) between two vertical infinite walls at different but constant temperatures is investigated by means of direct numerical simulation for a wide range of Grashof numbers (6.0 × 106 > Gr > 1.0 × 103). The maximum Grashof number is almost one order of magnitude higher than those of computations reported in the literature so far. Results for the turbulent transport equations are presented and compared to previous studies with special attention to the study of Verteegh and Nieuwstadt (Int J Heat Fluid Flow 19:135-149, 1998). All turbulence statistics are available on the TUHH homepage (http://www.tu-harburg.de/tt/dnsdatabase/dbindex.en.html). Accuracy considerations are based on the time averaged balance equations for kinetic and thermal energy. With the second law of thermodynamics Nusselt numbers can be determined by evaluating time averaged wall temperature gradients as well as by a volumetric time averaged integration. Comparing the results of both approaches leads to a direct measure of the physical consistency.

Direct Measurements of Smartphone Screen-Time: Relationships with Demographics and Sleep

PubMed Central

Christensen, Matthew A.; Bettencourt, Laura; Kaye, Leanne; Moturu, Sai T.; Nguyen, Kaylin T.; Olgin, Jeffrey E.; Pletcher, Mark J.; Marcus, Gregory M.

2016-01-01

Background Smartphones are increasingly integrated into everyday life, but frequency of use has not yet been objectively measured and compared to demographics, health information, and in particular, sleep quality. Aims The aim of this study was to characterize smartphone use by measuring screen-time directly, determine factors that are associated with increased screen-time, and to test the hypothesis that increased screen-time is associated with poor sleep. Methods We performed a cross-sectional analysis in a subset of 653 participants enrolled in the Health eHeart Study, an internet-based longitudinal cohort study open to any interested adult (≥ 18 years). Smartphone screen-time (the number of minutes in each hour the screen was on) was measured continuously via smartphone application. For each participant, total and average screen-time were computed over 30-day windows. Average screen-time specifically during self-reported bedtime hours and sleeping period was also computed. Demographics, medical information, and sleep habits (Pittsburgh Sleep Quality Index–PSQI) were obtained by survey. Linear regression was used to obtain effect estimates. Results Total screen-time over 30 days was a median 38.4 hours (IQR 21.4 to 61.3) and average screen-time over 30 days was a median 3.7 minutes per hour (IQR 2.2 to 5.5). Younger age, self-reported race/ethnicity of Black and "Other" were associated with longer average screen-time after adjustment for potential confounders. Longer average screen-time was associated with shorter sleep duration and worse sleep-efficiency. Longer average screen-times during bedtime and the sleeping period were associated with poor sleep quality, decreased sleep efficiency, and longer sleep onset latency. Conclusions These findings on actual smartphone screen-time build upon prior work based on self-report and confirm that adults spend a substantial amount of time using their smartphones. Screen-time differs across age and race, but is similar across socio-economic strata suggesting that cultural factors may drive smartphone use. Screen-time is associated with poor sleep. These findings cannot support conclusions on causation. Effect-cause remains a possibility: poor sleep may lead to increased screen-time. However, exposure to smartphone screens, particularly around bedtime, may negatively impact sleep. PMID:27829040

Transition of cord blood lead level, 1985-2002, in the Taipei area and its determinants after the cease of leaded gasoline use.

PubMed

Hwang, Yaw-Huei; Ko, Yi; Chiang, Chien-Dai; Hsu, Shih-Penn; Lee, Yu-Hsiang; Yu, Chun-Hsien; Chiou, Chuen-Hua; Wang, Jung-Der; Chuang, Hung-Yi

2004-11-01

Lead has long been of concern for its toxicity, impairment of neurobehavioral and cognitive development, and electrophysiological deficits in children, even at levels less than 10 microg/dL. The present study was conducted to elucidate the extent of cord blood lead level decline in the Taipei area from 1985 to 2002 and to explore the factors affecting the cord blood lead level after the cease of leaded gasoline use. In the current study period of 2001-2002, 184 of 1310 newborns delivered in the Taipei Municipal Women and Children Hospital between September 2001 and August 2002 were eligible and randomly selected to participate in this study. Neither of their parents had an occupational lead exposure history. At each delivery, a sample of 5-10 mL umbilical cord blood was collected for lead determination by graphite furnace atomic absorption spectrometry. The cord blood lead level of the newborns in the current study period averaged 2.35 +/- 1.12 microg/dL. Together with the cord blood lead averages of 7.48 +/- 2.25 and 3.28 +/- 1.52 microg/dL obtained from two previous surveys conducted in 1985-1987 and 1990-1992, respectively, the cord blood lead level was significantly decreased (P < 0.005). It is estimated that such a reduction in cord blood lead from 7.48 to 2.35 microg/dL for each year's cohort of 260,000 newborns in Taiwan might benefit the economics, ranging from US$8.9 billion to US$12.1 billion by improving the worker productivity. For the time period from 1985 to 2002, there were consistent transition patterns among the yearly fluctuations of air lead level, leaded gasoline consumption, lead content in gasoline, estimated lead amount emitted from the consumed leaded gasoline, and average cord blood lead levels of the three respective study periods. Additionally, every 0.1-g/L reduction in lead content in gasoline might lead to a lowering of cord blood lead level by 1.78 microg/dL. Furthermore, at low level of around 2 microg/dL, a multiple regression analysis demonstrated that economic status was the most influential factor for cord blood lead variation (P = 0.0061) while the maternal working month during her pregnancy was retained in the model with borderline effect (P = 0.0625). After accounting for the effect of leaded gasoline on the cord blood lead level, future study to differentiate the primary contributors for the low-level cord blood lead variation around 1-2 microg/dL is warranted.

Study of thioflavin-T immobilized in porous silicon and the effect of different organic vapors on the fluorescence lifetime.

PubMed

Hutter, Tanya; Amdursky, Nadav; Gepshtein, Rinat; Elliott, Stephen R; Huppert, Dan

2011-06-21

Steady-state and time-resolved emission techniques have been employed to study the fluorescence properties of thioflavin-T (ThT) adsorbed on oxidized porous silicon (PSi) surfaces, with an average pore size of ∼10 nm. We found that the average fluorescence decay time of ThT, when it is adsorbed on the PSi surface, is rather long, τ(av) = 1.3 ns. We attribute this relatively long emission lifetime to the effect of the immobilization of ThT on the PSi surface, which inhibit the rotation of the aniline with respect to the benzothiazole moieties of ThT. We also measured the fluorescence properties of ThT in PSi samples in equilibrium with vapors of several liquids, such as methanol, acetonitrile, and water. We found that the fluorescence intensity drops by a factor of 10, and the average decay time, measured by a time-correlated single-photon counting technique, decreases by a factor of 3. We explain these results in terms of liquid condensation of the vapors in the PSi pores, which leads to partial dissolution of the ThT molecules in the liquid pools. © 2011 American Chemical Society

Nonlinear optimal control policies for buoyancy-driven flows in the built environment

NASA Astrophysics Data System (ADS)

Nabi, Saleh; Grover, Piyush; Caulfield, Colm

2017-11-01

We consider optimal control of turbulent buoyancy-driven flows in the built environment, focusing on a model test case of displacement ventilation with a time-varying heat source. The flow is modeled using the unsteady Reynolds-averaged equations (URANS). To understand the stratification dynamics better, we derive a low-order partial-mixing ODE model extending the buoyancy-driven emptying filling box problem to the case of where both the heat source and the (controlled) inlet flow are time-varying. In the limit of a single step-change in the heat source strength, our model is consistent with that of Bower et al.. Our model considers the dynamics of both `filling' and `intruding' added layers due to a time-varying source and inlet flow. A nonlinear direct-adjoint-looping optimal control formulation yields time-varying values of temperature and velocity of the inlet flow that lead to `optimal' time-averaged temperature relative to appropriate objective functionals in a region of interest.

Preschool speech error patterns predict articulation and phonological awareness outcomes in children with histories of speech sound disorders

PubMed Central

Preston, Jonathan L.; Hull, Margaret; Edwards, Mary Louise

2012-01-01

Purpose To determine if speech error patterns in preschoolers with speech sound disorders (SSDs) predict articulation and phonological awareness (PA) outcomes almost four years later. Method Twenty-five children with histories of preschool SSDs (and normal receptive language) were tested at an average age of 4;6 and followed up at 8;3. The frequency of occurrence of preschool distortion errors, typical substitution and syllable structure errors, and atypical substitution and syllable structure errors were used to predict later speech sound production, PA, and literacy outcomes. Results Group averages revealed below-average school-age articulation scores and low-average PA, but age-appropriate reading and spelling. Preschool speech error patterns were related to school-age outcomes. Children for whom more than 10% of their speech sound errors were atypical had lower PA and literacy scores at school-age than children who produced fewer than 10% atypical errors. Preschoolers who produced more distortion errors were likely to have lower school-age articulation scores. Conclusions Different preschool speech error patterns predict different school-age clinical outcomes. Many atypical speech sound errors in preschool may be indicative of weak phonological representations, leading to long-term PA weaknesses. Preschool distortions may be resistant to change over time, leading to persisting speech sound production problems. PMID:23184137

Preschool speech error patterns predict articulation and phonological awareness outcomes in children with histories of speech sound disorders.

PubMed

Preston, Jonathan L; Hull, Margaret; Edwards, Mary Louise

2013-05-01

To determine if speech error patterns in preschoolers with speech sound disorders (SSDs) predict articulation and phonological awareness (PA) outcomes almost 4 years later. Twenty-five children with histories of preschool SSDs (and normal receptive language) were tested at an average age of 4;6 (years;months) and were followed up at age 8;3. The frequency of occurrence of preschool distortion errors, typical substitution and syllable structure errors, and atypical substitution and syllable structure errors was used to predict later speech sound production, PA, and literacy outcomes. Group averages revealed below-average school-age articulation scores and low-average PA but age-appropriate reading and spelling. Preschool speech error patterns were related to school-age outcomes. Children for whom >10% of their speech sound errors were atypical had lower PA and literacy scores at school age than children who produced <10% atypical errors. Preschoolers who produced more distortion errors were likely to have lower school-age articulation scores than preschoolers who produced fewer distortion errors. Different preschool speech error patterns predict different school-age clinical outcomes. Many atypical speech sound errors in preschoolers may be indicative of weak phonological representations, leading to long-term PA weaknesses. Preschoolers' distortions may be resistant to change over time, leading to persisting speech sound production problems.

How to Achieve Fast Entrainment? The Timescale to Synchronization

PubMed Central

Granada, Adrián E.; Herzel, Hanspeter

2009-01-01

Entrainment, where oscillators synchronize to an external signal, is ubiquitous in nature. The transient time leading to entrainment plays a major role in many biological processes. Our goal is to unveil the specific dynamics that leads to fast entrainment. By studying a generic model, we characterize the transient time to entrainment and show how it is governed by two basic properties of an oscillator: the radial relaxation time and the phase velocity distribution around the limit cycle. Those two basic properties are inherent in every oscillator. This concept can be applied to many biological systems to predict the average transient time to entrainment or to infer properties of the underlying oscillator from the observed transients. We found that both a sinusoidal oscillator with fast radial relaxation and a spike-like oscillator with slow radial relaxation give rise to fast entrainment. As an example, we discuss the jet-lag experiments in the mammalian circadian pacemaker. PMID:19774087

40 CFR 86.007-11 - Emission standards and supplemental requirements for 2007 and later model year diesel heavy-duty...

Code of Federal Regulations, 2011 CFR

2011-07-01

... family are derived from averaging, banking, or trading programs. (ii)(A) Non-Methane Hydrocarbons (NMHC... brake horsepower-hour (0.052 grams per megajoule). (B) Non-Methane Hydrocarbon Equivalent (NMHCE) for... of the given hardware and lead time and production cycles including phase-in or phase-out of engines...

40 CFR 86.007-11 - Emission standards and supplemental requirements for 2007 and later model year diesel heavy-duty...

Code of Federal Regulations, 2013 CFR

2013-07-01

... family are derived from averaging, banking, or trading programs. (ii)(A) Non-Methane Hydrocarbons (NMHC... brake horsepower-hour (0.052 grams per megajoule). (B) Non-Methane Hydrocarbon Equivalent (NMHCE) for... of the given hardware and lead time and production cycles including phase-in or phase-out of engines...

40 CFR 86.007-11 - Emission standards and supplemental requirements for 2007 and later model year diesel heavy-duty...

Code of Federal Regulations, 2010 CFR

2010-07-01

... family are derived from averaging, banking, or trading programs. (ii)(A) Non-Methane Hydrocarbons (NMHC... brake horsepower-hour (0.052 grams per megajoule). (B) Non-Methane Hydrocarbon Equivalent (NMHCE) for... of the given hardware and lead time and production cycles including phase-in or phase-out of engines...

40 CFR 86.007-11 - Emission standards and supplemental requirements for 2007 and later model year diesel heavy-duty...

Code of Federal Regulations, 2014 CFR

2014-07-01

... family are derived from averaging, banking, or trading programs. (ii)(A) Non-Methane Hydrocarbons (NMHC... brake horsepower-hour (0.052 grams per megajoule). (B) Non-Methane Hydrocarbon Equivalent (NMHCE) for... of the given hardware and lead time and production cycles including phase-in or phase-out of engines...

40 CFR 86.007-11 - Emission standards and supplemental requirements for 2007 and later model year diesel heavy-duty...

Code of Federal Regulations, 2012 CFR

2012-07-01

... family are derived from averaging, banking, or trading programs. (ii)(A) Non-Methane Hydrocarbons (NMHC... brake horsepower-hour (0.052 grams per megajoule). (B) Non-Methane Hydrocarbon Equivalent (NMHCE) for... of the given hardware and lead time and production cycles including phase-in or phase-out of engines...

The Use of Ultrasound to Improve Axillary Vein Access and Minimize Complications during Pacemaker Implantation.

PubMed

Esmaiel, Abdullah; Hassan, Jeremy; Blenkhorn, Fay; Mardigyan, Vartan

2016-05-01

The Agency for Healthcare Research and Quality in the United States recommends the use of ultrasound (US) for central venous access to improve patient outcomes. However, in a recent publication, US is still underutilized for axillary vein access during pacemaker implantation. We sought to describe a technique for US-guided axillary vein access during pacemaker implantation and to report complication rates and success rate. Retrospective data collection included success rate and complications on all pacemaker implants by one operator since implementing the systematic use of US at our institution, from November 2012 to January 2015. For the last 59 cases, data were collected prospectively to include time of venous access and number of attempts. A total of 403 consecutive patients were included in the analysis. Two leads were implanted in 255 cases and one lead was implanted in 148 cases. The rate of successful US-guided access was 99.25%. There were no access-related complications. The average number of venipuncture attempts was 1.18 per patient. The average time to obtain venous access was 2.24 minutes including the time to apply the sterile US sleeve. The described technique has the potential to improve the success rate of axillary vein access and minimize complications during pacemaker implantation. ©2016 Wiley Periodicals, Inc.

Skilful seasonal forecasts of streamflow over Europe?

NASA Astrophysics Data System (ADS)

Arnal, Louise; Cloke, Hannah L.; Stephens, Elisabeth; Wetterhall, Fredrik; Prudhomme, Christel; Neumann, Jessica; Krzeminski, Blazej; Pappenberger, Florian

2018-04-01

This paper considers whether there is any added value in using seasonal climate forecasts instead of historical meteorological observations for forecasting streamflow on seasonal timescales over Europe. A Europe-wide analysis of the skill of the newly operational EFAS (European Flood Awareness System) seasonal streamflow forecasts (produced by forcing the Lisflood model with the ECMWF System 4 seasonal climate forecasts), benchmarked against the ensemble streamflow prediction (ESP) forecasting approach (produced by forcing the Lisflood model with historical meteorological observations), is undertaken. The results suggest that, on average, the System 4 seasonal climate forecasts improve the streamflow predictability over historical meteorological observations for the first month of lead time only (in terms of hindcast accuracy, sharpness and overall performance). However, the predictability varies in space and time and is greater in winter and autumn. Parts of Europe additionally exhibit a longer predictability, up to 7 months of lead time, for certain months within a season. In terms of hindcast reliability, the EFAS seasonal streamflow hindcasts are on average less skilful than the ESP for all lead times. The results also highlight the potential usefulness of the EFAS seasonal streamflow forecasts for decision-making (measured in terms of the hindcast discrimination for the lower and upper terciles of the simulated streamflow). Although the ESP is the most potentially useful forecasting approach in Europe, the EFAS seasonal streamflow forecasts appear more potentially useful than the ESP in some regions and for certain seasons, especially in winter for almost 40 % of Europe. Patterns in the EFAS seasonal streamflow hindcast skill are however not mirrored in the System 4 seasonal climate hindcasts, hinting at the need for a better understanding of the link between hydrological and meteorological variables on seasonal timescales, with the aim of improving climate-model-based seasonal streamflow forecasting.

Analysis of the optical characteristics of adipose tissue in vitro sensitized by indocyanine green and exposed to IR-laser irradiation

NASA Astrophysics Data System (ADS)

Yanina, I. Yu.; Doubrovski, V. A.; Tuchin, V. V.

2015-03-01

The effect of IR-laser irradiation on adipose tissue sensitized by indocyanine green is studied in vitro. Experiments and statistical analysis are used to show that wavelength-selective irradiation leads to an increase in the homogeneity of optical images of adipose cells with time. The transmission coefficient that is averaged over the image area weakly depends on the observation time. An increase in the homogeneity of images is interpreted as a result of immersion of optical inhomogeneities of tissue owing to the intracellular liquid that is released through the photochemically induced pores in cellular membranes. An increase in the optical homogeneity of the medium is compensated for by a decrease in the transmission coefficient of the sensitizer, which is manifested as a weak time dependence of the image-averaged transmittance of tissue.

Quantifying exciton hopping in disordered media with quenching sites: Application to arrays of quantum dots

NASA Astrophysics Data System (ADS)

Miyazaki, Jun

2013-10-01

We present an analytical method for quantifying exciton hopping in an energetically disordered system with quenching sites. The method is subsequently used to provide a quantitative understanding of exciton hopping in a quantum dot (QD) array. Several statistical quantities that characterize the dynamics (survival probability, average number of distinct sites visited, average hopping distance, and average hopping rate in the initial stage) are obtained experimentally by measuring time-resolved fluorescence intensities at various temperatures. The time evolution of these quantities suggests in a quantitative way that at low temperature an exciton tends to be trapped at a local low-energy site, while at room temperature, exciton hopping occurs repeatedly, leading to a large hopping distance. This method will serve to facilitate highly efficient optoelectronic devices using QDs such as photovoltaic cells and light-emitting diodes, since exciton hopping is considered to strongly influence their operational parameters. The presence of a dark QD (quenching site) that exhibits fast decay is also quantified.

Simultaneous calibration of ensemble river flow predictions over an entire range of lead times

NASA Astrophysics Data System (ADS)

Hemri, S.; Fundel, F.; Zappa, M.

2013-10-01

Probabilistic estimates of future water levels and river discharge are usually simulated with hydrologic models using ensemble weather forecasts as main inputs. As hydrologic models are imperfect and the meteorological ensembles tend to be biased and underdispersed, the ensemble forecasts for river runoff typically are biased and underdispersed, too. Thus, in order to achieve both reliable and sharp predictions statistical postprocessing is required. In this work Bayesian model averaging (BMA) is applied to statistically postprocess ensemble runoff raw forecasts for a catchment in Switzerland, at lead times ranging from 1 to 240 h. The raw forecasts have been obtained using deterministic and ensemble forcing meteorological models with different forecast lead time ranges. First, BMA is applied based on mixtures of univariate normal distributions, subject to the assumption of independence between distinct lead times. Then, the independence assumption is relaxed in order to estimate multivariate runoff forecasts over the entire range of lead times simultaneously, based on a BMA version that uses multivariate normal distributions. Since river runoff is a highly skewed variable, Box-Cox transformations are applied in order to achieve approximate normality. Both univariate and multivariate BMA approaches are able to generate well calibrated probabilistic forecasts that are considerably sharper than climatological forecasts. Additionally, multivariate BMA provides a promising approach for incorporating temporal dependencies into the postprocessed forecasts. Its major advantage against univariate BMA is an increase in reliability when the forecast system is changing due to model availability.

The stretch to stray on time: Resonant length of random walks in a transient

NASA Astrophysics Data System (ADS)

Falcke, Martin; Friedhoff, Victor Nicolai

2018-05-01

First-passage times in random walks have a vast number of diverse applications in physics, chemistry, biology, and finance. In general, environmental conditions for a stochastic process are not constant on the time scale of the average first-passage time or control might be applied to reduce noise. We investigate moments of the first-passage time distribution under an exponential transient describing relaxation of environmental conditions. We solve the Laplace-transformed (generalized) master equation analytically using a novel method that is applicable to general state schemes. The first-passage time from one end to the other of a linear chain of states is our application for the solutions. The dependence of its average on the relaxation rate obeys a power law for slow transients. The exponent ν depends on the chain length N like ν = - N / ( N + 1 ) to leading order. Slow transients substantially reduce the noise of first-passage times expressed as the coefficient of variation (CV), even if the average first-passage time is much longer than the transient. The CV has a pronounced minimum for some lengths, which we call resonant lengths. These results also suggest a simple and efficient noise control strategy and are closely related to the timing of repetitive excitations, coherence resonance, and information transmission by noisy excitable systems. A resonant number of steps from the inhibited state to the excitation threshold and slow recovery from negative feedback provide optimal timing noise reduction and information transmission.

An improved procedure for determining grain boundary diffusion coefficients from averaged concentration profiles

NASA Astrophysics Data System (ADS)

Gryaznov, D.; Fleig, J.; Maier, J.

2008-03-01

Whipple's solution of the problem of grain boundary diffusion and Le Claire's relation, which is often used to determine grain boundary diffusion coefficients, are examined for a broad range of ratios of grain boundary to bulk diffusivities Δ and diffusion times t. Different reasons leading to errors in determining the grain boundary diffusivity (DGB) when using Le Claire's relation are discussed. It is shown that nonlinearities of the diffusion profiles in lnCav-y6/5 plots and deviations from "Le Claire's constant" (-0.78) are the major error sources (Cav=averaged concentration, y =coordinate in diffusion direction). An improved relation (replacing Le Claire's constant) is suggested for analyzing diffusion profiles particularly suited for small diffusion lengths (short times) as often required in diffusion experiments on nanocrystalline materials.

Assessment of potential toxicity of a smokeless tobacco product (naswar) available on the Pakistani market.

PubMed

Zakiullah; Saeed, Muhammad; Muhammad, Naveed; Khan, Saeed Ahmad; Gul, Farah; Khuda, Fazli; Humayun, Muhammad; Khan, Hamayun

2012-07-01

'Naswar' is a smokeless tobacco product (STP) widely used in Pakistan. It has been correlated with oral and oesophageal cancer in recent clinical studies. The toxic effects associated with STPs have been associated with trace level contaminants present in these products. The toxin levels of Pakistani naswar are reported for the first time in this study. A total of 30 Pakistani brands of naswar were tested for a variety of toxic constituents and carcinogens such as cadmium, arsenic, lead and other carcinogenic metals, nitrite and nitrate, and nicotine and pH. The average values of all the toxins studied were well above their allowable limits, making the product a health risk for consumers. Calculated lifetime cancer risk from cadmium and lead was 1 lac (100,000) to 10 lac (1,000,000) times higher than the minimum 10E-4 (0.00001) to 10E-6 (0.000001), which is the 'target range' for potentially hazardous substances, according to the US Environmental Protection Agency. Similarly, the level of arsenic was in the range of 0.15 to 14.04 μg/g, the average being 1.25 μg/g. The estimated average bioavailable concentration of arsenic is 0.125-0.25 μg/g, which is higher than the allowable standard of 0.01 μg/g. Similarly, the average minimum daily intake of chromium and nickel was 126.97 μg and 122.01 μg, as compared to allowable 30-35 μg and 35 μg, respectively; a 4-5 times higher exposure. However, beryllium was not detected in any of the brands studied. The pH was highly basic, averaging 8.56, which favours the formation of tobacco specific amines thus making the product potentially toxic. This study validates clinical studies correlating incidence of cancer with naswar use in Pakistan. This study shows that the production, packaging, sale and consumption of naswar should be regulated so as to protect the public from the health hazards associated with its consumption.

Traveltime and longitudinal dispersion in Illinois streams

USGS Publications Warehouse

Graf, Julia B.

1986-01-01

Twenty-seven measurements of traveltime and longitudinal dispersion in 10 Illinois streams made from 1975 to 1982 provide data needed for estimating traveltime of peak concentration of a conservative solute, traveltime of the leading edge of a solute cloud, peak concentration resulting from injection of a given quantity of solute, and passage time of solute past a given point on a stream. These four variables can be estimated graphically for each stream from distance of travel and either discharge at the downstream end of the reach or flow-duration frequency. From equations developed from field measurements, the traveltime and dispersion characteristics also can be estimated for other unregulated streams in Illinois that have drainage areas less than about 1,500 square miles. For unmeasured streams, traveltime of peak concentration and of the leading edge of the cloud are related to discharge at the downstream end of the reach and to distance of travel. For both measured and unmeasured streams, peak concentration and passage time are best estimated from the relation of each to traveltime. In measured streams, dispersion efficiency is greater than that predicted by Fickian diffusion theory. The rate of decrease in peak concentration with traveltime is about equal to the rate of increase in passage time. Average velocity in a stream reach, given by the velocity of the center of solute mass in that reach, can be estimated from an equation developed from measured values. The equation relates average reach velocity to discharge at the downstream end of the reach. Average reach velocities computed for 9 of the 10 streams from available equations that are based on hydraulic-geometry relations are high relative to measured values. The estimating equation developed from measured velocities provides estimates of average reach velocity that are closer to measured velocities than are those computed using equations developed from hydraulic-geometry relations.

Statistical Mechanics of Prion Diseases

NASA Astrophysics Data System (ADS)

Slepoy, A.; Singh, R. R.; Pázmándi, F.; Kulkarni, R. V.; Cox, D. L.

2001-07-01

We present a two-dimensional, lattice based, protein-level statistical mechanical model for prion diseases (e.g., mad cow disease) with concomitant prion protein misfolding and aggregation. Our studies lead us to the hypothesis that the observed broad incubation time distribution in epidemiological data reflect fluctuation dominated growth seeded by a few nanometer scale aggregates, while much narrower incubation time distributions for innoculated lab animals arise from statistical self-averaging. We model ``species barriers'' to prion infection and assess a related treatment protocol.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Fuke, E-mail: wufuke@mail.hust.edu.cn; Tian, Tianhai, E-mail: tianhai.tian@sci.monash.edu.au; Rawlings, James B., E-mail: james.rawlings@wisc.edu

The frequently used reduction technique is based on the chemical master equation for stochastic chemical kinetics with two-time scales, which yields the modified stochastic simulation algorithm (SSA). For the chemical reaction processes involving a large number of molecular species and reactions, the collection of slow reactions may still include a large number of molecular species and reactions. Consequently, the SSA is still computationally expensive. Because the chemical Langevin equations (CLEs) can effectively work for a large number of molecular species and reactions, this paper develops a reduction method based on the CLE by the stochastic averaging principle developed in themore » work of Khasminskii and Yin [SIAM J. Appl. Math. 56, 1766–1793 (1996); ibid. 56, 1794–1819 (1996)] to average out the fast-reacting variables. This reduction method leads to a limit averaging system, which is an approximation of the slow reactions. Because in the stochastic chemical kinetics, the CLE is seen as the approximation of the SSA, the limit averaging system can be treated as the approximation of the slow reactions. As an application, we examine the reduction of computation complexity for the gene regulatory networks with two-time scales driven by intrinsic noise. For linear and nonlinear protein production functions, the simulations show that the sample average (expectation) of the limit averaging system is close to that of the slow-reaction process based on the SSA. It demonstrates that the limit averaging system is an efficient approximation of the slow-reaction process in the sense of the weak convergence.« less

The effects of fundus photography on the multifocal electroretinogram.

PubMed

Suresh, Sandip; Tienor, Brian J; Smith, Scott D; Lee, Michael S

2016-02-01

To determine the effect of flash fundus photography (FFP) on the multifocal electroretinogram (mfERG). Ten subjects underwent mfERG testing on three separate dates. Subjects received either mfERG without FFP, mfERG at 5 and 15 min after FFP, or mfERG at 30 and 45 min after FFP on each date. The FFP groups received 10 fundus photographs followed by mfERG testing, first of the right eye then of the left eye 10 min later. Data were averaged and analyzed in six concentric rings at each time point. Average amplitude and implicit times of the N1, P1, and N2 peaks for each concentric ring at each time point after FFP were compared to baseline. Flash fundus photography did not lead to a significant change of amplitude or implicit times of N1, P1, or N2 at 5 min after light exposure. These findings suggest that it is acceptable to perform mfERG testing without delay after performance of FFP.

Transition path time distributions for Lévy flights

NASA Astrophysics Data System (ADS)

Janakiraman, Deepika

2018-07-01

This paper presents a study of transition path time distributions for Lévy noise-induced barrier crossing. Transition paths are short segments of the reactive trajectories and span the barrier region of the potential without spilling into the reactant/product wells. The time taken to traverse this segment is referred to as the transition path time. Since the transition path is devoid of excursions in the minimum, the corresponding time will give the exclusive barrier crossing time, unlike . This work explores the distribution of transition path times for superdiffusive barrier crossing, analytically. This is made possible by approximating the barrier by an inverted parabola. Using this approximation, the distributions are evaluated in both over- and under-damped limits of friction. The short-time behaviour of the distributions, provide analytical evidence for single-step transition events—a feature in Lévy-barrier crossing as observed in prior simulation studies. The average transition path time is calculated as a function of the Lévy index (α), and the optimal value of α leading to minimum average transition path time is discussed, in both the limits of friction. Langevin dynamics simulations corroborating with the analytical results are also presented.

Sound source identification and sound radiation modeling in a moving medium using the time-domain equivalent source method.

PubMed

Zhang, Xiao-Zheng; Bi, Chuan-Xing; Zhang, Yong-Bin; Xu, Liang

2015-05-01

Planar near-field acoustic holography has been successfully extended to reconstruct the sound field in a moving medium, however, the reconstructed field still contains the convection effect that might lead to the wrong identification of sound sources. In order to accurately identify sound sources in a moving medium, a time-domain equivalent source method is developed. In the method, the real source is replaced by a series of time-domain equivalent sources whose strengths are solved iteratively by utilizing the measured pressure and the known convective time-domain Green's function, and time averaging is used to reduce the instability in the iterative solving process. Since these solved equivalent source strengths are independent of the convection effect, they can be used not only to identify sound sources but also to model sound radiations in both moving and static media. Numerical simulations are performed to investigate the influence of noise on the solved equivalent source strengths and the effect of time averaging on reducing the instability, and to demonstrate the advantages of the proposed method on the source identification and sound radiation modeling.

Diffusion in random networks

DOE PAGES

Zhang, Duan Z.; Padrino, Juan C.

2017-06-01

The ensemble averaging technique is applied to model mass transport by diffusion in random networks. The system consists of an ensemble of random networks, where each network is made of pockets connected by tortuous channels. Inside a channel, fluid transport is assumed to be governed by the one-dimensional diffusion equation. Mass balance leads to an integro-differential equation for the pocket mass density. The so-called dual-porosity model is found to be equivalent to the leading order approximation of the integration kernel when the diffusion time scale inside the channels is small compared to the macroscopic time scale. As a test problem,more » we consider the one-dimensional mass diffusion in a semi-infinite domain. Because of the required time to establish the linear concentration profile inside a channel, for early times the similarity variable is xt $-$1/4 rather than xt $-$1/2 as in the traditional theory. We found this early time similarity can be explained by random walk theory through the network.« less

New Measures of Teachers' Work Hours and Implications for Wage Comparisons

ERIC Educational Resources Information Center

West, Kristine L.

2014-01-01

Researchers have good data on teachers' annual salaries but a hazy understanding of teachers' hours of work. This makes it difficult to calculate an accurate hourly wage and leads policy makers to default to anecdote rather than fact when debating teacher pay. Using data from the American Time Use Survey, I find that teachers work an average of…

Army AL&T, October-December 2007

DTIC Science & Technology

2007-12-01

school students and under- graduates, including cadets and midship- men, to study science and engineering. IAT is also the lead biannual Electromag- netic... learning . The ICT has developed active partner- ships with government laboratories, other universities, Army schools , PMs and industry to align its...information is estimated to average 1 hour per response, including the time for reviewing instructions , searching existing data sources, gathering and

Your Parents Were Right, Scholars Say: More Studying Leads to Better Grades

ERIC Educational Resources Information Center

Glenn, David

2007-01-01

According to a paper released by the National Bureau of Economic Research, first-year college students who are assigned roommates with video-game consoles study 40 minutes less per day, on average, than first-year students whose roommates did not bring consoles. And that reduction in study time has a sizable effect on grades: First-year students…

Control of vortex on a non-slender delta wing by a nanosecond pulse surface dielectric barrier discharge

NASA Astrophysics Data System (ADS)

Zhao, Guang-yin; Li, Ying-hong; Liang, Hua; Han, Meng-hu; Hua, Wei-zhuo

2015-01-01

Wind tunnel experiments are conducted for improving the aerodynamic performance of delta wing using a leading-edge pulsed nanosecond dielectric barrier discharge (NS-DBD). The whole effects of pulsed NS-DBD on the aerodynamic performance of the delta wing are studied by balanced force measurements. Pressure measurements and particle image velocimetry (PIV) measurements are conducted to investigate the formation of leading-edge vortices affected by the pulsed NS-DBD, compared to completely stalled flow without actuation. Various pulsed actuation frequencies of the plasma actuator are examined with the freestream velocity up to 50 m/s. Stall has been delayed substantially and significant shifts in the aerodynamic forces can be achieved at the post-stall regions when the actuator works at the optimum reduced frequency of F + = 2. The upper surface pressure measurements show that the largest change of static pressure occurs at the forward part of the wing at the stall region. The time-averaged flow pattern obtained from the PIV measurement shows that flow reattachment is promoted with excitation, and a vortex flow pattern develops. The time-averaged locations of the secondary separation line and the center of the vortical region both move outboard with excitation.

Mutation rate estimation for 15 autosomal STR loci in a large population from Mainland China.

PubMed

Zhao, Zhuo; Zhang, Jie; Wang, Hua; Liu, Zhi-Peng; Liu, Ming; Zhang, Yuan; Sun, Li; Zhang, Hui

2015-09-01

STR, short tandem repeats, are well known as a type of powerful genetic marker and widely used in studying human population genetics. Compared with the conventional genetic markers, the mutation rate of STR is higher. Additionally, the mutations of STR loci do not lead to genetic inconsistencies between the genotypes of parents and children; therefore, the analysis of STR mutation is more suited to assess the population mutation. In this study, we focused on 15 autosomal STR loci. DNA samples from a total of 42,416 unrelated healthy individuals (19,037 trios) from the population of Mainland China collected between Jan 2012 and May 2014 were successfully investigated. In our study, the allele frequencies, paternal mutation rates, maternal mutation rates and average mutation rates were detected. Furthermore, we also investigated the relationship between paternal ages, maternal ages, area, the time of pregnancy and average mutation rate. We found that the paternal mutation rate was higher than the maternal mutation rate and the paternal, maternal, and average mutation rates had a positive correlation with paternal age, maternal age and the time of pregnancy respectively. Additionally, the average mutation rate of coastal areas was higher than that of inland areas.

Wave propagation of spectral energy content in a granular chain

NASA Astrophysics Data System (ADS)

Shrivastava, Rohit Kumar; Luding, Stefan

2017-06-01

A mechanical wave is propagation of vibration with transfer of energy and momentum. Understanding the spectral energy characteristics of a propagating wave through disordered granular media can assist in understanding the overall properties of wave propagation through inhomogeneous materials like soil. The study of these properties is aimed at modeling wave propagation for oil, mineral or gas exploration (seismic prospecting) or non-destructive testing of the internal structure of solids. The focus is on the total energy content of a pulse propagating through an idealized one-dimensional discrete particle system like a mass disordered granular chain, which allows understanding the energy attenuation due to disorder since it isolates the longitudinal P-wave from shear or rotational modes. It is observed from the signal that stronger disorder leads to faster attenuation of the signal. An ordered granular chain exhibits ballistic propagation of energy whereas, a disordered granular chain exhibits more diffusive like propagation, which eventually becomes localized at long time periods. For obtaining mean-field macroscopic/continuum properties, ensemble averaging has been used, however, such an ensemble averaged spectral energy response does not resolve multiple scattering, leading to loss of information, indicating the need for a different framework for micro-macro averaging.

Childhood lead poisoning prevention through prenatal housing inspection and remediation in St. Louis, MO.

PubMed

Berg, Daniel R; Eckstein, Erin T; Steiner, Matt S; Gavard, Jeffrey A; Gross, Gilad A

2012-03-01

We assessed the screening and remediation of home lead hazards prenatally in a high-risk population, hypothesizing that average blood-lead level and the number of poisonings would drop by 25%. One hundred fifty-two women underwent prenatal home inspections by certified lead inspectors. The hazards that were identified were remediated. The blood-lead levels of children of participating women were compared with matched control subjects. Blood-lead levels were obtained from 60 children and compared with matched control subjects. The average blood-lead level of children in the treatment group was 2.70 μg/dL vs 3.73 μg/dL in control subjects (P = .019). The percentage of children with levels >10 μg/dL in the treatment group was 0% vs 4.2% in control subjects (P = .128). Screening and remediation of houses of pregnant women is effective to reduce the average blood-lead level and number of children that exceed the federal level of concern for lead poisoning in a high-risk population. Copyright © 2012 Mosby, Inc. All rights reserved.

Statistically Assessing Time-Averaged and Paleosecular Variation Field Models Against Paleomagnetic Directional Data Sets. Can Likely non-Zonal Features be Detected in a Robust way ?

NASA Astrophysics Data System (ADS)

Hulot, G.; Khokhlov, A.

2007-12-01

We recently introduced a method to rigorously test the statistical compatibility of combined time-averaged (TAF) and paleosecular variation (PSV) field models against any lava flow paleomagnetic database (Khokhlov et al., 2001, 2006). Applying this method to test (TAF+PSV) models against synthetic data produced from those shows that the method is very efficient at discriminating models, and very sensitive, provided those data errors are properly taken into account. This prompted us to test a variety of published combined (TAF+PSV) models against a test Bruhnes stable polarity data set extracted from the Quidelleur et al. (1994) data base. Not surprisingly, ignoring data errors leads all models to be rejected. But taking data errors into account leads to the stimulating conclusion that at least one (TAF+PSV) model appears to be compatible with the selected data set, this model being purely axisymmetric. This result shows that in practice also, and with the data bases currently available, the method can discriminate various candidate models and decide which actually best fits a given data set. But it also shows that likely non-zonal signatures of non-homogeneous boundary conditions imposed by the mantle are difficult to identify as statistically robust from paleomagnetic directional data sets. In the present paper, we will discuss the possibility that such signatures could eventually be identified as robust with the help of more recent data sets (such as the one put together under the collaborative "TAFI" effort, see e.g. Johnson et al. abstract #GP21A-0013, AGU Fall Meeting, 2005) or by taking additional information into account (such as the possible coincidence of non-zonal time-averaged field patterns with analogous patterns in the modern field).

Maternal blood lead level during pregnancy in South Central Los Angeles.

PubMed

Rothenberg, S J; Manalo, M; Jiang, J; Khan, F; Cuellar, R; Reyes, S; Sanchez, M; Reynoso, B; Aguilar, A; Diaz, M; Acosta, S; Jauregui, M; Johnson, C

1999-01-01

Twenty-five years of public health efforts produced a striking reduction in lead exposure; the blood lead average in the United States has decreased to less than 20% of levels measured in the 1970s. However, poor minority groups that live in large urban centers are still at high risk for elevated lead levels. In this study, our data showed that pregnant immigrants (n = 1,428) who live in South Central Los Angeles--one of the most economically depressed regions of California--have significantly higher (p < .0001) blood lead levels (geometric mean = 2.3 microg/dl [0.11 micromol/l]) than 504 pregnant nonimmigrants (geometric mean = 1.9 microg/dl [0.09 micromol/l]). The most important factors associated with lower blood lead levels in both groups were younger age; more-recent date of blood sampling (i.e., decreasing secular trend); and blood sampling in mid-autumn, instead of mid-spring (i.e., seasonal trend). Blood lead levels of immigrants were strongly dependent on time elapsed since immigration to the United States; each natural log increase in years of residence was associated with an approximately 19% decrease in blood lead levels. Although blood lead means for both groups were almost the same as the estimated national average, 25 of the 30 cases of elevated blood lead (i.e., > or = 10 microg/dl [0.48 micromol/l) occurred in the immigrant group. The odds ratio (95% confidence intervals within parentheses) for having elevated blood lead levels (a) was 9.3 (1.9, 45.8) if the immigrant engaged in pica; (b) was 3.8 (1.4, 10.5) if the immigrant had low dietary calcium intake during pregnancy; and (c) was .65 (.43, .98) for every natural log unit increase of years of residence in the United States. The control of pica and dietary calcium intake may offer a means of reducing lead exposure in immigrants.

Reduction in operator radiation exposure during transradial coronary procedures using a simple lead rectangle.

PubMed

Osherov, Azriel B; Bruoha, Sharon; Laish Farkash, Avishag; Paul, Gideon; Orlov, Ian; Katz, Amos; Jafari, Jamal

2017-02-01

Transradial access for percutaneous coronary intervention (PCI) reduces procedural complications however, there are concerns regarding the potential for increased exposure to ionizing radiation to the primary operator. We evaluated the efficacy of a lead-attenuator in reducing radiation exposure during transradial PCI. This was a non-randomized, prospective, observational study in which 52 consecutive patients were assigned to either standard operator protection (n = 26) or the addition of the lead attenuator across their abdomen/pelvis (n = 26). In the attenuator group patients were relatively older with a higher prevalence of peripheral vascular disease (67.9 vs 58.7 p = 0.0292 and 12% vs 7.6% p < 0.001 respectively). Despite similar average fluoroscopy times (12.3 ± 9.8 min vs. 9.3 ± 5.4 min, p = 0.175) and average examination doses (111866 ± 80790 vs. 91,268 ± 47916 Gycm 2 , p = 0.2688), the total radiation exposure to the operator, at the thyroid level, was significantly lower when the lead-attenuator was utilized (20.2% p < 0.0001) as compared to the control group. Amongst the 26 patients assigned to the lead-attenuator, there was a significant reduction in measured radiation of 94.5% (p < 0.0001), above as compared to underneath the lead attenuator. Additional protection with the use of a lead rectangle-attenuator significantly lowered radiation exposure to the primary operator, which may confer long-term benefits in reducing radiation-induced injury. This is the first paper to show that a simple lead attenuator almost completely reduced the scattered radiation at very close proximity to the patient and should be considered as part of the standard equipment within catheterization laboratories.

Effect of static porosity fluctuations on reactive transport in a porous medium

NASA Astrophysics Data System (ADS)

L'Heureux, Ivan

2018-02-01

Reaction-diffusive transport phenomena in porous media are ubiquitous in engineering applications, biological and geochemical systems. The porosity field is usually random in space, but most models consider the porosity field as a well-defined deterministic function of space and time and ignore the porosity fluctuations. They use a reaction-diffusion equation written in terms of an average porosity and average concentration fields. In this contribution, we treat explicitly the effect of spatial porosity fluctuations on the dynamics of a concentration field for the case of a one-dimensional reaction-transport system with nonlinear kinetics. Three basic assumptions are considered. (i) The porosity fluctuations are assumed to have Gaussian properties and an arbitrary variance; (ii) we assume that the noise correlation length is small compared to the relevant macroscopic length scale; (iii) and we assume that the kinetics of the reactive term in the equations for the fluctuations is a self-consistently determined constant. Elimination of the fluctuating part of the concentration field from the dynamics leads to a renormalized equation involving the average concentration field. It is shown that the noise leads to a renormalized (generally smaller) diffusion coefficient and renormalized kinetics. Within the framework of the approximations used, numerical simulations are in agreement with our theory. We show that the porosity fluctuations may have a significant effect on the transport of a reactive species, even in the case of a homogeneous average porosity.

Single molecular biology: coming of age in DNA replication.

PubMed

Liu, Xiao-Jing; Lou, Hui-Qiang

2017-09-20

DNA replication is an essential process of the living organisms. To achieve precise and reliable replication, DNA polymerases play a central role in DNA synthesis. Previous investigations have shown that the average rates of DNA synthesis on the leading and lagging strands in a replisome must be similar to avoid the formation of significant gaps in the nascent strands. The underlying mechanism has been assumed to be coordination between leading- and lagging-strand polymerases. However, Kowalczykowski's lab members recently performed single molecule techniques in E. coli and showed the real-time behavior of a replisome. The leading- and lagging-strand polymerases function stochastically and independently. Furthermore, when a DNA polymerase is paused, the helicase slows down in a self-regulating fail-safe mechanism, akin to a ''dead-man's switch''. Based on the real-time single-molecular observation, the authors propose that leading- and lagging-strand polymerases synthesize DNA stochastically within a Gaussian distribution. Along with the development and application of single-molecule techniques, we will witness a new age of DNA replication and other biological researches.

When can time-dependent currents be reproduced by the Landauer steady-state approximation?

NASA Astrophysics Data System (ADS)

Carey, Rachel; Chen, Liping; Gu, Bing; Franco, Ignacio

2017-05-01

We establish well-defined limits in which the time-dependent electronic currents across a molecular junction subject to a fluctuating environment can be quantitatively captured via the Landauer steady-state approximation. For this, we calculate the exact time-dependent non-equilibrium Green's function (TD-NEGF) current along a model two-site molecular junction, in which the site energies are subject to correlated noise, and contrast it with that obtained from the Landauer approach. The ability of the steady-state approximation to capture the TD-NEGF behavior at each instant of time is quantified via the same-time correlation function of the currents obtained from the two methods, while their global agreement is quantified by examining differences in the average currents. The Landauer steady-state approach is found to be a useful approximation when (i) the fluctuations do not disrupt the degree of delocalization of the molecular eigenstates responsible for transport and (ii) the characteristic time for charge exchange between the molecule and leads is fast with respect to the molecular correlation time. For resonant transport, when these conditions are satisfied, the Landauer approach is found to accurately describe the current, both on average and at each instant of time. For non-resonant transport, we find that while the steady-state approach fails to capture the time-dependent transport at each instant of time, it still provides a good approximation to the average currents. These criteria can be employed to adopt effective modeling strategies for transport through molecular junctions in interaction with a fluctuating environment, as is necessary to describe experiments.

[ESTIMATION OF THE EFFICIENCY OF THE TREATMENT OF SPLIT-SYSTEMS IN RESIDENTIAL AREAS IN ORDER TO REDUCE THE LEVEL OF THE PREVALENCE OF DISEASES OF THE RESPIRATORY SYSTEM].

PubMed

Rakhmanin Yu A; Shibanov, S E; Kozulya, S V

2016-01-01

The purpose of work: comparison of prevalence among residents, which use or fail to use to clean split systems. Collected information about morbidity rate in 235 cases people during 3 years. The usage of split-systems without their regular cleaning leads to the gain in the level of the prevalence of respiratory diseases by 172.7% if compared with persons, who have no air conditioning systems at home. Also, the average number of disability days increases by 218.1%) and average time of the duration of the disease increases by 71.9%. The annual treatment of split-systems and regular cleaning of filters allowed to reduce the number of diseases. In comparison with the group of people, who fail to clean air conditioning systems, the drop of morbidity rate by 56.6%, average number of disability days by 63.3% and average time of diseases by 30.9% was observed. Regular treatment of air conditioning systems cannot completely repay the morbidity rates to the level of the control group. In comparison with the people, who use no air conditioning systems, the owners of split-systems with regular treatment have lung diseases by 18.4% more often. The average number of disability days and the average time of diseases increased by 16.9% and 18.8%. These changes can be explained by the impact of unfavorable (cooling) microclimate. The impact of split-systems on the health of the population requires a comprehensive study and the subsequent development of normative documents regulating their safe use.

Analysis of lead concentration in forager stingless bees Trigona sp. (hymenoptera: Apidae) and propolis at Cilutung and Maribaya, West Java

NASA Astrophysics Data System (ADS)

Safira, Nabila; Anggraeni, Tjandra

2015-09-01

Several studies had shown that lead (Pb) in the environment could accumulate in bees, which in turn could affect the quality of the resulting product. In this study, forager stingless bees (Trigona sp.) and its product (propolis) collected from a stingless bees apiculture. This apiculture had two apiary sites which were distinguished by its environmental setting. Apiary site in Cilutung had a forest region environmental setting, while apiary site in Maribaya was located beside the main road. The objective of this study was to determine the extent of lead concentration in propolis originated from both apiary sites and establish the correlation between lead concentration in propolis and lead level in forager stingless bees. Forager bees and propolis samples were originated from 50 bees colonies (Cilutung) and 44 bees colonies (Maribaya). They were analyzed using AAS-GF (Atomic Absorption Spectrometre-Graphite Furnace) to determine the level of lead concentration. The results showed that the average level of lead in propolis originated from Cilutung (298.08±73.71 ppb) was lower than the average level of lead in forager bees which originated from Maribaya (330.64±156.34 ppb). However, these values did not show significant difference (p>0.05). There was no significant difference (p>0.05) between the average level of lead in forager bees which originated from Cilutung (118.08±30.46 ppb) and Maribaya (128.82±39.66 ppb). However, these values did not show significant difference (p>0.05). In conclusion, the average level of lead concentration in propolis in both sites had passed the maximum permission standard of lead for food in Indonesia. There was no correlation between lead concentration in propolis and forager stingless bees.

The Impact Assessment of Demographic Factors on Faculty Commitment in the Kingdom of Saudi Arabian Universities

ERIC Educational Resources Information Center

Iqbal, Adnan; Kokash, Husam A.; Al-Oun, Salem

2011-01-01

Organizational commitment is perceived as an attitude of association to the organization by an employee, which leads to particular job-related behaviors such as work absenteeism, job satisfaction and turnover intensions. Turnover is the ratio of the number of workers that had to be replaced in a given time period to the average number of workers.…

Health-hazard evaluation report HETA 90-084-2219, Kansas City Kansas Police Department, Kansas City, Kansas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rinehart, R.; Almaguer, D.

1992-05-01

In response to a request from a management representative of the Kansas City, Kansas, Police Department (SIC-9221), an evaluation was undertaken of possible lead (7439921) exposures at the Police Department outdoor firing range. About 200,000 rounds of ammunition were fired at the range each year. Personal breathing zone and area air samples were taken for lead analysis. Surface wipe samples were taken as well along with hand lead concentrations and contamination of clothing. Air sampling revealed that the officers were exposed to 8 hour time weighted average concentrations of airborne lead ranging from nondetectable to 8 micrograms (microg) per cubicmore » meter. The general air samples collected ranged from nondetectable to trace levels of contamination. The authors conclude that airborne lead did not exceed evaluation criteria, but dermal, surface and clothing contamination could increase the potential for lead ingestion and lead contamination of automobiles and homes. The authors recommend that efforts be made to reduce the potential spread of lead, and that medical surveillance be instituted for frequent range users and the range master.« less

Lead-lag cross-sectional structure and detection of correlated anticorrelated regime shifts: Application to the volatilities of inflation and economic growth rates

NASA Astrophysics Data System (ADS)

Zhou, Wei-Xing; Sornette, Didier

2007-07-01

We have recently introduced the “thermal optimal path” (TOP) method to investigate the real-time lead-lag structure between two time series. The TOP method consists in searching for a robust noise-averaged optimal path of the distance matrix along which the two time series have the greatest similarity. Here, we generalize the TOP method by introducing a more general definition of distance which takes into account possible regime shifts between positive and negative correlations. This generalization to track possible changes of correlation signs is able to identify possible transitions from one convention (or consensus) to another. Numerical simulations on synthetic time series verify that the new TOP method performs as expected even in the presence of substantial noise. We then apply it to investigate changes of convention in the dependence structure between the historical volatilities of the USA inflation rate and economic growth rate. Several measures show that the new TOP method significantly outperforms standard cross-correlation methods.

Benchmarking ensemble streamflow prediction skill in the UK

NASA Astrophysics Data System (ADS)

Harrigan, Shaun; Prudhomme, Christel; Parry, Simon; Smith, Katie; Tanguy, Maliko

2018-03-01

Skilful hydrological forecasts at sub-seasonal to seasonal lead times would be extremely beneficial for decision-making in water resources management, hydropower operations, and agriculture, especially during drought conditions. Ensemble streamflow prediction (ESP) is a well-established method for generating an ensemble of streamflow forecasts in the absence of skilful future meteorological predictions, instead using initial hydrologic conditions (IHCs), such as soil moisture, groundwater, and snow, as the source of skill. We benchmark when and where the ESP method is skilful across a diverse sample of 314 catchments in the UK and explore the relationship between catchment storage and ESP skill. The GR4J hydrological model was forced with historic climate sequences to produce a 51-member ensemble of streamflow hindcasts. We evaluated forecast skill seamlessly from lead times of 1 day to 12 months initialized at the first of each month over a 50-year hindcast period from 1965 to 2015. Results showed ESP was skilful against a climatology benchmark forecast in the majority of catchments across all lead times up to a year ahead, but the degree of skill was strongly conditional on lead time, forecast initialization month, and individual catchment location and storage properties. UK-wide mean ESP skill decayed exponentially as a function of lead time with continuous ranked probability skill scores across the year of 0.75, 0.20, and 0.11 for 1-day, 1-month, and 3-month lead times, respectively. However, skill was not uniform across all initialization months. For lead times up to 1 month, ESP skill was higher than average when initialized in summer and lower in winter months, whereas for longer seasonal and annual lead times skill was higher when initialized in autumn and winter months and lowest in spring. ESP was most skilful in the south and east of the UK, where slower responding catchments with higher soil moisture and groundwater storage are mainly located; correlation between catchment base flow index (BFI) and ESP skill was very strong (Spearman's rank correlation coefficient = 0.90 at 1-month lead time). This was in contrast to the more highly responsive catchments in the north and west which were generally not skilful at seasonal lead times. Overall, this work provides scientific justification for when and where use of such a relatively simple forecasting approach is appropriate in the UK. This study, furthermore, creates a low cost benchmark against which potential skill improvements from more sophisticated hydro-meteorological ensemble prediction systems can be judged.

Development of a New Time-Resolved Laser-Induced Fluorescence Technique

NASA Astrophysics Data System (ADS)

Durot, Christopher; Gallimore, Alec

2012-10-01

We are developing a time-resolved laser-induced fluorescence (LIF) technique to interrogate the ion velocity distribution function (VDF) of EP thruster plumes down to the microsecond time scale. Better measurements of dynamic plasma processes will lead to improvements in simulation and prediction of thruster operation and erosion. We present the development of the new technique and results of initial tests. Signal-to-noise ratio (SNR) is often a challenge for LIF studies, and it is only more challenging for time-resolved measurements since a lock-in amplifier cannot be used with a long time constant. The new system uses laser modulation on the order of MHz, which enables the use of electronic filtering and phase-sensitive detection to improve SNR while preserving time-resolved information. Statistical averaging over many cycles to further improve SNR is done in the frequency domain. This technique can have significant advantages, including (1) larger spatial maps enabled by shorter data acquisition time and (2) the ability to average data without creating a phase reference by modifying the thruster operating condition with a periodic cutoff in discharge current, which can modify the ion velocity distribution.

Land processes lead to surprising patterns in atmospheric residence time

NASA Astrophysics Data System (ADS)

van der Ent, R.; Tuinenburg, O.

2017-12-01

Our research using atmospheric moisture tracking methods shows that the global average atmospheric residence time of evaporation is 8-10 days. This residence time appears to be Gamma distributed with a higher probability of shorter than average residence times and a long tail. As a consequence the median of this residence time is around 5 days. In some places in the world the first few hours/days after evaporation there seems to be a little chance for a moisture particle to precipitate again, which is reflected by a Gamma distribution having a shape parameter below 1. In this study we present global maps of this parameter using different datasets (GLDAS and ERA-Interim). The shape parameter is as such also a measure for the land-atmospheric coupling strength along the path of the atmospheric water particle. We also find that different evaporation components: canopy interception, soil evaporation and transpiration appear to have different residence time distributions. We find a daily cycle in the residence time distribution over land, which is not present over the oceans. In this paper we will show which of the evaporation components is mainly responsible for this daily pattern and thus exhibits the largest daily cycle of land-atmosphere coupling strength.

Increasing molecular weight parameters of a helical polymer through polymerization in a chiral solvent.

PubMed

Holder, Simon J; Achilleos, Mariliz; Jones, Richard G

2006-09-27

In this communication, we will demonstrate that polymerization in a chiral solvent can affect the molecular weight distribution of the product by perturbing the balance of the P and M helical screw senses of the growing chains. Specifically, for the Wurtz-type synthesis of polymethylphenylsilane (PMPS) in either (R) or (S)-limonene, the weight-average molecular weight of the products (average Mw = 80 000) was twice that of PMPS synthesized in (R/S)-limonene (average Mw = 39 200). Peturbation of the helical segmentation along the polymer chains leads to a reduction in the rate of occurrence of a key termination step. This the first time that a chiral solvent has been demonstrated to have such an effect on a polymerization process in affecting molecular weight parameters in contrast to affecting tacticity.

Neurodevelopment for the first three years following prenatal mobile phone use, radio frequency radiation and lead exposure.

PubMed

Choi, Kyung-Hwa; Ha, Mina; Ha, Eun-Hee; Park, Hyesook; Kim, Yangho; Hong, Yun-Chul; Lee, Ae-Kyoung; Hwa Kwon, Jong; Choi, Hyung-Do; Kim, Nam; Kim, Suejin; Park, Choonghee

2017-07-01

Studies examining prenatal exposure to mobile phone use and its effect on child neurodevelopment show different results, according to child's developmental stages. To examine neurodevelopment in children up to 36 months of age, following prenatal mobile phone use and radiofrequency radiation (RFR) exposure, in relation to prenatal lead exposure. We analyzed 1198 mother-child pairs from a prospective cohort study (the Mothers and Children's Environmental Health Study). Questionnaires were provided to pregnant women at ≤20 weeks of gestation to assess mobile phone call frequency and duration. A personal exposure meter (PEM) was used to measure RFR exposure for 24h in 210 pregnant women. Maternal blood lead level (BLL) was measured during pregnancy. Child neurodevelopment was assessed using the Korean version of the Bayley Scales of Infant Development-Revised at 6, 12, 24, and 36 months of age. Logistic regression analysis applied to groups classified by trajectory analysis showing neurodevelopmental patterns over time. The psychomotor development index (PDI) and the mental development index (MDI) at 6, 12, 24, and 36 months of age were not significantly associated with maternal mobile phone use during pregnancy. However, among children exposed to high maternal BLL in utero, there was a significantly increased risk of having a low PDI up to 36 months of age, in relation to an increasing average calling time (p-trend=0.008). There was also a risk of having decreasing MDI up to 36 months of age, in relation to an increasing average calling time or frequency during pregnancy (p-trend=0.05 and 0.007 for time and frequency, respectively). There was no significant association between child neurodevelopment and prenatal RFR exposure measured by PEM in all subjects or in groups stratified by maternal BLL during pregnancy. We found no association between prenatal exposure to RFR and child neurodevelopment during the first three years of life; however, a potential combined effect of prenatal exposure to lead and mobile phone use was suggested. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Cost of illness of oral lichen planus in a U.K. population--a pilot study.

PubMed

Ni Riordain, Richeal; Christou, Joanna; Pinder, Denise; Squires, Vanessa; Hodgson, Tim

2016-05-01

To assess the economic burden of oral lichen planus (OLP) from the perspective of the healthcare provider in a U.K. population. This prevalence-based cost-of-illness analysis was carried out via a cross-sectional study conducted in the Oral Medicine Unit of the Eastman Dental Hospital. This study was conducted in three phases - phase 1 involved framing of the cost-of-illness analysis, development of the cost inventory and design of the patient questionnaire for ease of data collection. Data collected from patients were inputted during phase 2, and costings were determined. The final phase consisted of the calculation of the cost of illness of OLP. One hundred patients were enrolled in the study, 30 males and 70 females, with an average age of 59.9 years (±13.4 years). The average OLP patient, based on our cohort, attends the oral medicine unit 2.64 times per year, their general medical practitioner 1.13 times annually, their general dental practitioner 0.82 times in a year and fills on average 3.37 prescriptions annually. This leads to an average annual cost of £398.58 (€541.16) per patient per year from the perspective of the healthcare provider. The annual average cost of OLP to the healthcare provider in the U.K. is substantial. The prevalence-based cost-of-illness data generated in this study will facilitate comparison with other chronic oral mucosal diseases and with chronic diseases managed in allied medical specialties. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Time series modelling of increased soil temperature anomalies during long period

NASA Astrophysics Data System (ADS)

Shirvani, Amin; Moradi, Farzad; Moosavi, Ali Akbar

2015-10-01

Soil temperature just beneath the soil surface is highly dynamic and has a direct impact on plant seed germination and is probably the most distinct and recognisable factor governing emergence. Autoregressive integrated moving average as a stochastic model was developed to predict the weekly soil temperature anomalies at 10 cm depth, one of the most important soil parameters. The weekly soil temperature anomalies for the periods of January1986-December 2011 and January 2012-December 2013 were taken into consideration to construct and test autoregressive integrated moving average models. The proposed model autoregressive integrated moving average (2,1,1) had a minimum value of Akaike information criterion and its estimated coefficients were different from zero at 5% significance level. The prediction of the weekly soil temperature anomalies during the test period using this proposed model indicated a high correlation coefficient between the observed and predicted data - that was 0.99 for lead time 1 week. Linear trend analysis indicated that the soil temperature anomalies warmed up significantly by 1.8°C during the period of 1986-2011.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vinuesa, Ricardo; Fick, Lambert; Negi, Prabal

In the present document we describe a toolbox for the spectral-element code Nek5000, aimed at computing turbulence statistics. The toolbox is presented for a small test case, namely a square duct with L x = 2h, L y = 2h and L z = 4h, where x, y and z are the horizontal, vertical and streamwise directions, respectively. The number of elements in the xy-plane is 16 X 16 = 256, and the number of elements in z is 4, leading to a total of 1,204 spectral elements. A polynomial order of N = 5 is chosen, and the meshmore » is generated using the Nek5000 tool genbox. The toolbox presented here allows to compute mean-velocity components, the Reynolds-stress tensor as well as turbulent kinetic energy (TKE) and Reynolds-stress budgets. Note that the present toolbox allows to compute turbulence statistics in turbulent flows with one homogeneous direction (where the statistics are based on time-averaging as well as averaging in the homogeneous direction), as well as in fully three-dimensional flows (with no periodic directions, where only time-averaging is considered).« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Safira, Nabila, E-mail: safira.nabila@ymail.com; Anggraeni, Tjandra, E-mail: tjandra@sith.itb.ac.id

Several studies had shown that lead (Pb) in the environment could accumulate in bees, which in turn could affect the quality of the resulting product. In this study, forager stingless bees (Trigona sp.) and its product (propolis) collected from a stingless bees apiculture. This apiculture had two apiary sites which were distinguished by its environmental setting. Apiary site in Cilutung had a forest region environmental setting, while apiary site in Maribaya was located beside the main road. The objective of this study was to determine the extent of lead concentration in propolis originated from both apiary sites and establish themore » correlation between lead concentration in propolis and lead level in forager stingless bees. Forager bees and propolis samples were originated from 50 bees colonies (Cilutung) and 44 bees colonies (Maribaya). They were analyzed using AAS-GF (Atomic Absorption Spectrometre–Graphite Furnace) to determine the level of lead concentration. The results showed that the average level of lead in propolis originated from Cilutung (298.08±73.71 ppb) was lower than the average level of lead in forager bees which originated from Maribaya (330.64±156.34 ppb). However, these values did not show significant difference (p>0.05). There was no significant difference (p>0.05) between the average level of lead in forager bees which originated from Cilutung (118.08±30.46 ppb) and Maribaya (128.82±39.66 ppb). However, these values did not show significant difference (p>0.05). In conclusion, the average level of lead concentration in propolis in both sites had passed the maximum permission standard of lead for food in Indonesia. There was no correlation between lead concentration in propolis and forager stingless bees.« less

Ambulatory blood pressure monitoring-derived short-term blood pressure variability in primary hyperparathyroidism.

PubMed

Concistrè, A; Grillo, A; La Torre, G; Carretta, R; Fabris, B; Petramala, L; Marinelli, C; Rebellato, A; Fallo, F; Letizia, C

2018-04-01

Primary hyperparathyroidism is associated with a cluster of cardiovascular manifestations, including hypertension, leading to increased cardiovascular risk. The aim of our study was to investigate the ambulatory blood pressure monitoring-derived short-term blood pressure variability in patients with primary hyperparathyroidism, in comparison with patients with essential hypertension and normotensive controls. Twenty-five patients with primary hyperparathyroidism (7 normotensive,18 hypertensive) underwent ambulatory blood pressure monitoring at diagnosis, and fifteen out of them were re-evaluated after parathyroidectomy. Short-term-blood pressure variability was derived from ambulatory blood pressure monitoring and calculated as the following: 1) Standard Deviation of 24-h, day-time and night-time-BP; 2) the average of day-time and night-time-Standard Deviation, weighted for the duration of the day and night periods (24-h "weighted" Standard Deviation of BP); 3) average real variability, i.e., the average of the absolute differences between all consecutive BP measurements. Baseline data of normotensive and essential hypertension patients were matched for age, sex, BMI and 24-h ambulatory blood pressure monitoring values with normotensive and hypertensive-primary hyperparathyroidism patients, respectively. Normotensive-primary hyperparathyroidism patients showed a 24-h weighted Standard Deviation (P < 0.01) and average real variability (P < 0.05) of systolic blood pressure higher than that of 12 normotensive controls. 24-h average real variability of systolic BP, as well as serum calcium and parathyroid hormone levels, were reduced in operated patients (P < 0.001). A positive correlation of serum calcium and parathyroid hormone with 24-h-average real variability of systolic BP was observed in the entire primary hyperparathyroidism patients group (P = 0.04, P  = 0.02; respectively). Systolic blood pressure variability is increased in normotensive patients with primary hyperparathyroidism and is reduced by parathyroidectomy, and may potentially represent an additional cardiovascular risk factor in this disease.

Past and future changes in streamflow in the U.S. Midwest: Bridging across time scales

NASA Astrophysics Data System (ADS)

Villarini, G.; Slater, L. J.; Salvi, K. A.

2017-12-01

Streamflows have increased notably across the U.S. Midwest over the past century, principally due to changes in precipitation and land use / land cover. Improving our understanding of the physical drivers that are responsible for the observed changes in discharge may enhance our capability of predicting and projecting these changes, and may have large implications for water resources management over this area. This study will highlight our efforts towards the statistical attribution of changes in discharge across the U.S. Midwest, with analyses performed at the seasonal scale from low to high flows. The main drivers of changing streamflows that we focus on are: urbanization, agricultural land cover, basin-averaged temperature, basin-averaged precipitation, and antecedent soil moisture. Building on the insights from this attribution, we will examine the potential predictability of streamflow across different time scales, with lead times ranging from seasonal to decadal, and discuss a potential path forward for engineering design for future conditions.

Conceptual Analysis of System Average Water Stability

NASA Astrophysics Data System (ADS)

Zhang, H.

2016-12-01

Averaging over time and area, the precipitation in an ecosystem (SAP - system average precipitation) depends on the average surface temperature and relative humidity (RH) in the system if uniform convection is assumed. RH depends on the evapotranspiration of the system (SAE - system average evapotranspiration). There is a non-linear relationship between SAP and SAE. Studying this relationship can lead mechanistic understanding of the ecosystem health status and trend under different setups. If SAP is higher than SAE, the system will have a water runoff which flows out through rivers. If SAP is lower than SAE, irrigation is needed to maintain the vegetation status. This presentation will give a conceptual analysis of the stability in this relationship under different assumed areas, water or forest coverages, elevations and latitudes. This analysis shows that desert is a stable system. Water circulation in basins is also stabilized at a specific SAP based on the basin profile. It further shows that deforestation will reduce SAP, and can flip the system to an irrigation required status. If no irrigation is provided, the system will automatically reduce to its stable point - desert, which is extremely difficult to turn around.

The influence of averaging procedure on the accuracy of IVIVC predictions: immediate release dosage form case study.

PubMed

Ostrowski, Michalł; Wilkowska, Ewa; Baczek, Tomasz

2010-12-01

In vivo-in vitro correlation (IVIVC) is an effective tool to predict absorption behavior of active substances from pharmaceutical dosage forms. The model for immediate release dosage form containing amoxicillin was used in the presented study to check if the calculation method of absorption profiles can influence final results achieved. The comparison showed that an averaging of individual absorption profiles performed by Wagner-Nelson (WN) conversion method can lead to lose the discrimination properties of the model. The approach considering individual plasma concentration versus time profiles enabled to average absorption profiles prior WN conversion. In turn, that enabled to find differences between dispersible tablets and capsules. It was concluded that in the case of immediate release dosage form, the decision to use averaging method should be based on an individual situation; however, it seems that the influence of such a procedure on the discrimination properties of the model is then more significant. © 2010 Wiley-Liss, Inc. and the American Pharmacists Association

40 CFR 421.254 - Standards of performance for new sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... average mg/troy ounce of gold refined electrolytically Lead 5.544 2.574 Mercury 2.970 1.188 Silver 5.742 2... property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0... reduced in solution Lead 0.112 0.052 Mercury 0.060 0.024 Silver 0.116 0.048 Zinc 0.408 0.168 Gold 0.040...

Health-hazard-evaluation report HETA 89-234-2014, Sims Radiator Shop, Decatur, Georgia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gunter, B.J.; Hales, T.

1990-02-01

In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714), Decatur, Georgia. The shop employs seven workers, five of whom are mechanics, involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for four of the mechanics were 50, 30, 20, and 10 micrograms per cubic meter (microg/cu m). One of these was at the OSHA permissible exposure limit of 50microg/cu m. All seven employees participated in a medical evaluation. None of the shop employees had anymore » physical symptoms suggestive of lead intoxication. The authors conclude that a health hazard existed from overexposure to lead. The authors recommend that the provisions of the OSHA lead standard should be implemented to protect the workers.« less

Incidence of acute spinal cord injury in the Czech Republic: a prospective epidemiological study 2006-2015.

PubMed

Kriz, J; Kulakovska, M; Davidova, H; Silova, M; Kobesova, A

2017-09-01

A prospective study. Analysis of epidemiological data about acute spinal cord injury (SCI) in the Czech Republic over a period of 10 years (2006-2015). A data collection system was implemented in the rehabilitation centres which provides care to patients with acute SCI in the Czech Republic. The recorded variables are as follows: age at time of SCI; gender; cause of injury; neurological level of injury (NLI); and its severity (ASIA Impairment Scale (AIS)). Data from 2006 to 2015 were analysed and trends were determined. The overall number of acute SCI ranges between 250 and 300 cases annually. Two-third of the affected population are males. The average age at time of SCI is 49.1 years. The average incidence of traumatic SCI is 15.5 cases per year and is gradually decreasing. The leading cause of SCI are falls (44.5%), followed by traffic accidents (28.2%) and sports injuries including diving into water (19.7%). The incidence of non-traumatic SCI is 8.6 cases per year on average and has an upward trend. Inflammatory lesions account for 26.7% of cases, tumours account for 20.9%, and vascular related injuries make up 17.7%. The NLI occurs most often in the cervical segments (45.3%). The most frequently occurring lesions are motor incomplete: AIS D (33.3%). This study shows a stable occurrence of SCI in the Czech Republic, with cervical and motor incomplete cases being the leading ones. Epidemiological data are needed to improve the care of SCI patients and to promote an active life following it.

Threaded average temperature thermocouple

NASA Technical Reports Server (NTRS)

Ward, Stanley W. (Inventor)

1990-01-01

A threaded average temperature thermocouple 11 is provided to measure the average temperature of a test situs of a test material 30. A ceramic insulator rod 15 with two parallel holes 17 and 18 through the length thereof is securely fitted in a cylinder 16, which is bored along the longitudinal axis of symmetry of threaded bolt 12. Threaded bolt 12 is composed of material having thermal properties similar to those of test material 30. Leads of a thermocouple wire 20 leading from a remotely situated temperature sensing device 35 are each fed through one of the holes 17 or 18, secured at head end 13 of ceramic insulator rod 15, and exit at tip end 14. Each lead of thermocouple wire 20 is bent into and secured in an opposite radial groove 25 in tip end 14 of threaded bolt 12. Resulting threaded average temperature thermocouple 11 is ready to be inserted into cylindrical receptacle 32. The tip end 14 of the threaded average temperature thermocouple 11 is in intimate contact with receptacle 32. A jam nut 36 secures the threaded average temperature thermocouple 11 to test material 30.

Solving the negative impact of congestion in the postanesthesia care unit: a cost of opportunity analysis.

PubMed

Ruiz-Patiño, Alejandro; Acosta-Ospina, Laura Elena; Rueda, Juan-David

2017-04-01

Congestion in the postanesthesia care unit (PACU) leads to the formation of waiting queues for patients being transferred after surgery, negatively affecting hospital resources. As patients recover in the operating room, incoming surgeries are delayed. The purpose of this study was to establish the impact of this phenomenon in multiple settings. An operational mathematical study based on the queuing theory was performed. Average queue length, average queue waiting time, and daily queue waiting time were evaluated. Calculations were based on the mean patient daily flow, PACU length of stay, occupation, and current number of beds. Data was prospectively collected during a period of 2 months, and the entry and exit time was recorded for each patient taken to the PACU. Data was imputed in a computational model made with MS Excel. To account for data uncertainty, deterministic and probabilistic sensitivity analyses for all dependent variables were performed. With a mean patient daily flow of 40.3 and an average PACU length of stay of 4 hours, average total lost surgical opportunity time was estimated at 2.36 hours (95% CI: 0.36-4.74 hours). Cost of opportunity was calculated at $1592 per lost hour. Sensitivity analysis showed that an increase of two beds is required to solve the queue formation. When congestion has a negative impact on cost of opportunity in the surgical setting, queuing analysis grants definitive actions to solve the problem, improving quality of service and resource utilization. Copyright © 2016 Elsevier Inc. All rights reserved.

Joint Force Quarterly. Issue 55, 4th Quarter 2009

DTIC Science & Technology

2009-01-01

average 1 hour per response, including the time for reviewing instructions, searching existing data sources , gathering and maintaining the data needed...to critique systems theory from some of its source documents, he could have accessed the many works of scientists and philosophers such as Russell...numerous sources , including writings of some leading systems theorists. It is simply false to claim, as Professor Czarnecki does (and many systems

An Analysis of the Marine Corps Selection Process: Does Increased Competition Lead to Increased Quality

DTIC Science & Technology

2018-03-01

collection of information is estimated to average 1 hour per response, including the time for reviewing instruction, searching existing data sources...gathering and maintaining the data needed, and completing and reviewing the collection of information . Send comments regarding this burden estimate or...any other aspect of this collection of information , including suggestions for reducing this burden, to Washington headquarters Services, Directorate

Bone Plating in Patients with Type III Osteogenesis Imperfecta: Results and Complications

PubMed Central

Enright, William J; Noonan, Kenneth J

2006-01-01

The results of bone plating in four children (6 femurs, 2 tibias) with osteogenesis imperfecta type III were analyzed. Average age at time of operation was 44 months. In three of the femurs, multiple platings were performed for a total of 13 bone platings in the eight bones studied. Average time to revision following plating was 27 months. Indications for revision included fracture (6), deformity (3), hardware failure (3), and nonunion (1). Other complications included one case of compartment syndrome. All eight bones were ultimately revised to elongating intramedullary Bailey-Dubow rods. Bone plating in skeletally immature patients with osteogenesis imperfecta does not provide better outcome than elongating rods. Complications from bone plating leading to revision, such as refracture or hardware failure, are higher than in those children managed with elongating rods, as previously reported in the literature. PMID:16789446

Assessment of softball bat safety performance using mid-compression polyurethane softballs.

PubMed

McDowell, Mark

2004-07-01

There is currently much debate about the safety of the sport of softball. Batted-ball speed and average pitcher reaction time are factors often used to determine safe performance. Batted-ball speed is shown to be the most important factor to consider when determining safe play. Average pitcher reaction time is explained and directly correlated to batted-ball speed. Eleven aluminum multi-wall, three aluminum single-wall and two composite softball bats were tested with mid-compression polyurethane softballs averaging 1721+/-62 N/6.4 mm to represent the relative bat-ball performance for the sport of slowpitch softball. Nine men and six women were chosen for this study out of a test group of over three hundred slowpitch softball players. On average, aluminum bat performance results were within the recommended safety limits established by the national softball associations. However, when composite bats were used, their performance results exceeded the recommended safety limits which can pose a significant safety risk. Using aluminum softball bats, batted-ball speeds ranged from 80 to 145km x h(-1) Using composite softball bats, batted-ball speeds ranged from 146 to 161 km x h(-1). The scientific relevance of this study is to provide performance information that can lead to injury prevention in the sport of softball.

Energy relaxation of intense laser pulse-produced plasmas

NASA Astrophysics Data System (ADS)

Shihab, M.; Abou-Koura, G. H.; El-Siragy, N. M.

2016-05-01

We describe a collisional radiative model (CRE) of homogeneously expanded nickel plasmas in vacuum. The CRE model is coupled with two separate electron and ion temperature magneto-hydrodynamic equations. On the output, the model provides the temporal variation of the electron temperature, ion temperature, and average charge state. We demonstrate the effect of three-body recombination ({∝}N_e T^{-9/2}_e) on plasma parameters, as it changes the time dependence of electron temperature from t^{-2} to t^{-1} and exhibits a pronounced effect leading to a freezing feature in the average charge state. In addition, the effect of the three-body recombination on the warm up of ions and delaying the equilibration is addressed.

The impact of hospital market structure on patient volume, average length of stay, and the cost of care.

PubMed

Robinson, J C; Luft, H S

1985-12-01

A variety of recent proposals rely heavily on market forces as a means of controlling hospital cost inflation. Sceptics argue, however, that increased competition might lead to cost-increasing acquisitions of specialized clinical services and other forms of non-price competition as means of attracting physicians and patients. Using data from hospitals in 1972 we analyzed the impact of market structure on average hospital costs, measured in terms of both cost per patient and cost per patient day. Under the retrospective reimbursement system in place at the time, hospitals in more competitive environments exhibited significantly higher costs of production than did those in less competitive environments.

Relationship between the start times of flares and CMEs to the time of potential radiation hazards

NASA Astrophysics Data System (ADS)

Kang, G.; Zheng, Y.; Kuznetsova, M. M.

2013-12-01

Solar flares, short-term outbursts of energy of the Sun, and coronal mass ejections (CME), massive bursts of solar matter, are two solar phenomena that are known to increase solar energetic particles in space. Increased solar energetic particles cause immense radiation that poses a serious threat to astronauts in space, radio communication signals, and passengers on high-latitude flights on the Earth. The relationship between the start times of flares and CMEs to the time of potential radiation hazards was investigated to determine how much warning time is available. Additionally, this project compared the difference between these relationships for four energy levels of solar energetic particles: proton flux exceeding 10 MeV, 30 MeV, 50 MeV and 100 MeV. This project gathered data of 22 recent SEP events between 2010 and 2012 and the parameters of associated CMEs and flares. Through the use of IDL (Interactive Data Language) programming, thorough analysis was conducted, including 2-sample t-tests and Kruskal-Wallis tests for 2 or more samples. The average lead time to warn humans of possible radiation hazard from the detection of a flare and a CME occurrence was found to be around 12 to 20 hours. The lead time was the greatest for the lowest energy level, though the differences in energy levels and that between the lead times for CME and flares were found to be statistically insignificant with p-values exceeding the alpha value of 0.20.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, W. R.; Nilsen, J.

Here, the influence of finite relaxation times on Thomson scattering from warm dense plasmas is examined within the framework of the average-atom approximation. Presently most calculations use the collision-free Lindhard dielectric function to evaluate the free-electron contribution to the Thomson cross section. In this work, we use the Mermin dielectric function, which includes relaxation time explicitly. The relaxation time is evaluated by treating the average atom as an impurity in a uniform electron gas and depends critically on the transport cross section. The calculated relaxation rates agree well with values inferred from the Ziman formula for the static conductivity andmore » also with rates inferred from a fit to the frequency-dependent conductivity. Transport cross sections determined by the phase-shift analysis in the average-atom potential are compared with those evaluated in the commonly used Born approximation. The Born approximation converges to the exact cross sections at high energies; however, differences that occur at low energies lead to corresponding differences in relaxation rates. The relative importance of including relaxation time when modeling x-ray Thomson scattering spectra is examined by comparing calculations of the free-electron dynamic structure function for Thomson scattering using Lindhard and Mermin dielectric functions. Applications are given to warm dense Be plasmas, with temperatures ranging from 2 to 32 eV and densities ranging from 2 to 64 g/cc.« less

40 CFR 464.34 - New source performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... scrubbed) effluent standards for copper, lead, zinc, total phenols, oil and grease, and TSS. For non...) 0.0129 0.0071 Lead (T) 0.0237 0.0116 Zinc (T) 0.0437 0.0165 Oil and grease 1.34 0.446 TSS 0.67 0.536... average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.29 0.16 0.0029 Lead (T) 0.53 0.26 0.0067 Zinc (T...

40 CFR 464.34 - New source performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... scrubbed) effluent standards for copper, lead, zinc, total phenols, oil and grease, and TSS. For non...) 0.0129 0.0071 Lead (T) 0.0237 0.0116 Zinc (T) 0.0437 0.0165 Oil and grease 1.34 0.446 TSS 0.67 0.536... average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.29 0.16 0.0029 Lead (T) 0.53 0.26 0.0067 Zinc (T...

Health-related quality of life and patient burden in patients with split-thickness skin graft donor site wounds.

PubMed

Humrich, Marco; Goepel, Lisa; Gutknecht, Mandy; Lohrberg, David; Blessmann, Marco; Bruning, Guido; Diener, Holger; Dissemond, Joachim; Hartmann, Bernd; Augustin, Matthias

2018-04-01

Split-thickness skin grafting is a common procedure to treat different kinds of wounds. This systematic, multicentre, observational, cross-sectional study of adult patients with split-thickness skin graft (STSG) donor site wounds was conducted to evaluate quality of life (QoL) impairments caused by donor site wounds following split-thickness skin grafting. Therefore, 112 patients from 12 wound centres in Germany were examined based on patient and physician questionnaires as well as a physical examination of the donor site wound. Most indications for skin grafting were postsurgical treatment (n = 51; 42.5%) and chronic wounds (n = 47; 39.2%). European QoL visual analoque scale (EQ VAS) averaged 64.7 ± 23.3, European QoL 5 dimensions (EQ-5D) averaged 77.4 ± 30.0. Wound-QoL (range: 0-4) was rated 0.8 ± 0.8 post-surgery and 0.4 ± 0.6 at the time of survey (on average 21 weeks between the time points). Compared to averaged Wound-QoL scores of chronic wounds donor site-related QoL impairments in split-thickness skin-graft patients were less pronounced. There were significant differences in patient burden immediately after surgery compared to the time of the survey, with medium effect sizes. This supports the hypothesis that faster healing of the donor site wound leads to more favourable patient-reported outcomes. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Minimum variance optimal rate allocation for multiplexed H.264/AVC bitstreams.

PubMed

Tagliasacchi, Marco; Valenzise, Giuseppe; Tubaro, Stefano

2008-07-01

Consider the problem of transmitting multiple video streams to fulfill a constant bandwidth constraint. The available bit budget needs to be distributed across the sequences in order to meet some optimality criteria. For example, one might want to minimize the average distortion or, alternatively, minimize the distortion variance, in order to keep almost constant quality among the encoded sequences. By working in the rho-domain, we propose a low-delay rate allocation scheme that, at each time instant, provides a closed form solution for either the aforementioned problems. We show that minimizing the distortion variance instead of the average distortion leads, for each of the multiplexed sequences, to a coding penalty less than 0.5 dB, in terms of average PSNR. In addition, our analysis provides an explicit relationship between model parameters and this loss. In order to smooth the distortion also along time, we accommodate a shared encoder buffer to compensate for rate fluctuations. Although the proposed scheme is general, and it can be adopted for any video and image coding standard, we provide experimental evidence by transcoding bitstreams encoded using the state-of-the-art H.264/AVC standard. The results of our simulations reveal that is it possible to achieve distortion smoothing both in time and across the sequences, without sacrificing coding efficiency.

COSMIC RADIATION AND TUBERCULOSIS. IV. INFLUENCE OF COSMIC RADIATION ON TUBERCULOSIS AT HIGH ALTITUDE (3,130 M) AND AT SEA-LEVEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ong, S.G.

1964-01-01

At high altitude (3,130 m) tuberculous mice exposed to cosmic radiation under 10 cm of lead showed significantly greater mean survival time and a significantly greater number of survivors than tuberculous mice exposed to direct cosmic radiation. Tuberculous mice exposed to cosmic radiation at high altitude under 10 cm of lead showed a significantly greater mean survival time than tuberculous mice kept at sea level, exposed to direct cosmic radiation, and to cosmic radiation under 1, 2, and 10 cm of lead. The correlation analysis shows that a decreas in lung lesions is associated with an increase in survival time.more » The decrease in lung lesions is associated with an enlargement of the spleen. At high altitude the female showed a significantly greater number of survivors than the male. At sea level no significant difference was observed. On the average the female showed a significantly greater number of survivors. The beneficial effect of daylight with ultraviolet light on tuberculous mice was manifested in a lower maximum of mortality and in a significant decrease of lung and spleen lesions. (auth)« less

Diachronism between extinction time of terrestrial and marine dinosaurs

NASA Technical Reports Server (NTRS)

Hansen, H. J.

1988-01-01

The dinosaur eggs of southern France occur in continental, fine-grained red-beds, rich in carbonate. The last eggs in the region occur in the magnetic polarity interval 30 normal. Estimates of the accumulation rate of these sediments on the basis of the magneto-stratigraphy leads to placement of the time of disappearance of the dinosaurs in this region of 200,000 to 400,000 years earlier than the Cretaceous-Tertiary boundary. In the Red Deer Valley, Canada, estimates of average accumulation rate lead to a time of disappearance of the dinosaurs of 135,000 to 157,000 years earlier than the Cretaceous-Tertiary boundary. In the central part of Poland, in the Nasilow Quarry, the paleomagnetic pattern shows 7 m of chalk of reversed polarity containing in its upper part the marine Cretaceous-Tertiary biostratigraphic boundary. A greensand deposit contains numerous re-deposited Maastrichtian fossils. The fossils show no signs of wear and are of very different sizes including 1 mm thick juvenile belemnites. The deposit was described as a lag-sediment. Among the various fossils are teeth of mosasaurs. Thus there is coincidence in time between the extinction of mosasaurs and other Cretaceous organisms. This leads to the conclusion, that extinction of terrestrial dinosaurs took place earlier than extinction of marine dinosaurs at the Cretaceous-Tertiary boundary.

Delayed surgical treatment for neglected or mal-reduced talar fractures.

PubMed

Huang, Peng-Ju; Cheng, Yuh-Min

2005-10-01

From 1993 to 2002, we treated nine patients for neglected or mal-reduced talar fractures. Average patient age was 39 (20-64) years and average follow-up 53 months. The time interval between injury and index operation ranged from 4 weeks to 4 years. Surgical procedures included open reduction with or without bone grafting in six cases, open reduction combined with ankle fusion in one case, talar neck osteotomy in one case, and talar neck osteotomy combined with subtalar fusion in one case. All cases had solid bone union. One patient developed avascular necrosis of the talus needing subsequent ankle arthrodesis. In six patients, adjacent hindfoot arthrosis occurred. The overall AOFAS ankle-hindfoot score was in average 77.4. We conclude that in neglected and mal-reduced talar fractures, surgical treatment can lead to a favourable outcome if the hindfoot joints are not arthritic.

Quantum transport under ac drive from the leads: A Redfield quantum master equation approach

NASA Astrophysics Data System (ADS)

Purkayastha, Archak; Dubi, Yonatan

2017-08-01

Evaluating the time-dependent dynamics of driven open quantum systems is relevant for a theoretical description of many systems, including molecular junctions, quantum dots, cavity-QED experiments, cold atoms experiments, and more. Here, we formulate a rigorous microscopic theory of an out-of-equilibrium open quantum system of noninteracting particles on a lattice weakly coupled bilinearly to multiple baths and driven by periodically varying thermodynamic parameters like temperature and chemical potential of the bath. The particles can be either bosonic or fermionic and the lattice can be of any dimension and geometry. Based on the Redfield quantum master equation under Born-Markov approximation, we derive a linear differential equation for an equal time two point correlation matrix, sometimes also called a single-particle density matrix, from which various physical observables, for example, current, can be calculated. Various interesting physical effects, such as resonance, can be directly read off from the equations. Thus, our theory is quite general and gives quite transparent and easy-to-calculate results. We validate our theory by comparing with exact numerical simulations. We apply our method to a generic open quantum system, namely, a double quantum dot coupled to leads with modulating chemical potentials. The two most important experimentally relevant insights from this are as follows: (i) Time-dependent measurements of current for symmetric oscillating voltages (with zero instantaneous voltage bias) can point to the degree of asymmetry in the system-bath coupling and (ii) under certain conditions time-dependent currents can exceed time-averaged currents by several orders of magnitude, and can therefore be detected even when the average current is below the measurement threshold.

Customized "In-Office" Three-Dimensional Printing for Virtual Surgical Planning in Craniofacial Surgery.

PubMed

Mendez, Bernardino M; Chiodo, Michael V; Patel, Parit A

2015-07-01

Virtual surgical planning using three-dimensional (3D) printing technology has improved surgical efficiency and precision. A limitation to this technology is that production of 3D surgical models requires a third-party source, leading to increased costs (up to $4000) and prolonged assembly times (averaging 2-3 weeks). The purpose of this study is to evaluate the feasibility, cost, and production time of customized skull models created by an "in-office" 3D printer for craniofacial reconstruction. Two patients underwent craniofacial reconstruction with the assistance of "in-office" 3D printing technology. Three-dimensional skull models were created from a bioplastic filament with a 3D printer using computed tomography (CT) image data. The cost and production time for each model were measured. For both patients, a customized 3D surgical model was used preoperatively to plan split calvarial bone grafting and intraoperatively to more efficiently and precisely perform the craniofacial reconstruction. The average cost for surgical model production with the "in-office" 3D printer was $25 (cost of bioplastic materials used to create surgical model) and the average production time was 14  hours. Virtual surgical planning using "in office" 3D printing is feasible and allows for a more cost-effective and less time consuming method for creating surgical models and guides. By bringing 3D printing to the office setting, we hope to improve intraoperative efficiency, surgical precision, and overall cost for various types of craniofacial and reconstructive surgery.

Tips pentacene crystal alignment for improving performance of solution processed organic thin film transistors

NASA Astrophysics Data System (ADS)

He, Zhengran

A newly-developed p-type organic semiconductor 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS pentacene) demonstrates various advantages such as high mobility, air stability and solution processibility, but at the same time its application is restricted by major issues, such as crystal misorientation and performance variation of organic thin-film transistors (OTFTs). This dissertation demonstrates several different approaches to address these issues. As a result, both crystal orientation and areal coverage can be effectively improved, leading to an enhancement of average mobility and performance consistency of OTFTs. Chapter 1 presents an introduction and background of this dissertation. Chapter 2 explores the usage of inorganic silica nanoparticles to manipulate the morphology of TIPS pentacene thin films and the performance of solution-processed organic OTFTs. The resultant drop-cast films yield improved morphological uniformity at ~10% SiO2 loading, which also leads to a 3-fold increase in average mobility and nearly 4-times reduction in the ratio of standard deviation of mobility (μStdev) to average mobility (μAvg). The experimental results suggest that the SiO2 nanoparticles mostly aggregate at TIPS pentacene grain boundaries, and that 10% nanoparticle concentration effectively reduces the undesirable crystal misorientation without considerably compromising TIPS pentacene crystallinity. Chapter 3 discusses the utilization of air flow to effectively reduce the TIPS pentacene crystal anisotropy and enhance performance consistency in OTFTs. Under air-flow navigation (AFN), TIPS pentacene forms thin films with improved crystal orientation and increased areal coverage, which subsequently lead to a four-fold increase of average hole mobility and one order of magnitude enhancement in performance consistency. Chapter 4 investigates the critical roles of lateral and vertical phase separation in the performance of the next-generation organic and hybrid electronic devices. A novel method is demonstrated here to switch between lateral and vertical phase separation in semiconducting TIPS pentacene/ polymer blend films by simply varying the alkyl length of the polyacrylate polymer component. The phase separation modes depend on intermolecular interactions between small molecule TIPS pentacene and polymer additives. The blend film with a dominant vertical phase separation exhibits a significant enhancement in average mobility and performance consistency of organic OTFTs. Chapter 5 demonstrates an effective approach to improve both charge transport and performance consistency in solution-processed OTFTs by blending TIPS pentacene with a series of small-molecule additives: 4-butylbenzoic acid (BBA), 4-hexylbenzoic acid (HBA), and 4-octylbenzoic acid (OBA). These three small molecules share a benzoic acid moiety, but have different length of hydrophobic tails. The self-assembled interfacial layer of small molecules on the gate oxide surface leads to uniform deposition of TIPS pentacene crystal seeds and facilitates TIPS pentacene to grow along the tilted orientation of substrate, which results in a film of enhanced crystal orientation and areal coverage. OTFTs based on TIPS pentacene/small molecule blends demonstrate greatly improved average hole mobility and performance consistency, which correlates with the length of hydrophobic tail of the small-molecule additives. Chapter 6 summarizes the conclusions of this dissertation and the related future work.

Long-term effect of increased lead absorption on intelligence of children.

PubMed

Soong, W T; Chao, K Y; Jang, C S; Wang, J D

1999-01-01

The authors examined the reversibility of cognitive impairment caused by a mild increase in lead absorption among children. The results of our initial study revealed that air and soil outside a lead-recycling plant in Taiwan were seriously contaminated by lead, which was associated with lowered intelligence quotients of 32 children who attended a nearby kindergarten (i.e., kindergarten A). Thirty-five children-who were comparable with respect to age, sex, birth order, sibling number, and parental education level-from another kindergarten (i.e., kindergarten B) located 5 km from the plant were enrolled as the reference group. Following the initial study, kindergarten A school children moved 2 km from the lead-recycling plant. Twenty-eight children in each group were followed successfully 2.5 y later. Blood lead, intelligence quotient, and intelligence quotient-related factors were reassessed. The results showed that the average blood lead level of the exposed pupils dropped 6.9 microg/dl (standard deviation [SD] = 3.9 microg/dl) (p < .001), and the average intelligence quotient increased 11.7 points (SD = 13.2) (p < .01), compared with the results of the initial study. The average blood lead level of the reference group decreased by 1.7 microg/dl (SD = .1.3) (p < .001), whereas the average intelligence quotient increased by 4.2 points (SD = 13.8) (p = .115). There was a significant difference in intelligence quotients between the two groups during the initial study, but the difference subsequently disappeared during the follow up. The authors concluded that intelligence quotient impairment, caused by a mild subclinical elevation of blood lead (i.e., likely no more than 30 microg/dl) for a period of 1-3 y in 3- to 5-y-olds, is at least partially reversible.

Impact of thermal effects induced by ultrasound on viability of rat C6 glioma cells.

PubMed

Kujawska, T; Secomski, W; Bilmin, K; Nowicki, A; Grieb, P

2014-07-01

In order to have consistent and repeatable effects of sonodynamic therapy (SDT) on various cancer cells or tissue lesions we should be able to control a delivered ultrasound energy and thermal effects induced. The objective of this study was to investigate viability of rat C6 glioma cells in vitro depending on the intensity of ultrasound in the region of cells and to determine the exposure time inducing temperature rise above 43 °C, which is known to be toxic for cells. For measurements a planar piezoelectric transducer with a diameter of 20 mm and a resonance frequency of 1.06 MHz was used. The transducer generated tone bursts with 94 μs duration, 0.4 duty-cycle and initial intensity ISATA (spatial averaged, temporal averaged) varied from 0.33 W/cm(2) to 8 W/cm(2) (average acoustic power varied from 1 W to 24 W). The rat C6 glioma cells were cultured on a bottom of wells in 12-well plates, incubated for 24h and then exposed to ultrasound with measured acoustic properties, inducing or causing no thermal effects leading to cell death. Cell viability rate was determined by MTT assay (a standard colorimetric assay for assessing cell viability) as the ratio of the optical densities of the group treated by ultrasound to the control group. Structural cellular changes and apoptosis estimation were observed under a microscope. Quantitative analysis of the obtained results allowed to determine the maximal exposure time that does not lead to the thermal effects above 43 °C in the region of cells for each initial intensity of the tone bursts used as well as the threshold intensity causing cell death after 3 min exposure to ultrasound due to thermal effects. The averaged threshold intensity was found to be about 5.7 W/cm(2). Copyright © 2014 Elsevier B.V. All rights reserved.

Sensitivity of peptide conformational dynamics on clustering of a classical molecular dynamics trajectory

NASA Astrophysics Data System (ADS)

Jensen, Christian H.; Nerukh, Dmitry; Glen, Robert C.

2008-03-01

We investigate the sensitivity of a Markov model with states and transition probabilities obtained from clustering a molecular dynamics trajectory. We have examined a 500ns molecular dynamics trajectory of the peptide valine-proline-alanine-leucine in explicit water. The sensitivity is quantified by varying the boundaries of the clusters and investigating the resulting variation in transition probabilities and the average transition time between states. In this way, we represent the effect of clustering using different clustering algorithms. It is found that in terms of the investigated quantities, the peptide dynamics described by the Markov model is sensitive to the clustering; in particular, the average transition times are found to vary up to 46%. Moreover, inclusion of nonphysical sparsely populated clusters can lead to serious errors of up to 814%. In the investigation, the time step used in the transition matrix is determined by the minimum time scale on which the system behaves approximately Markovian. This time step is found to be about 100ps. It is concluded that the description of peptide dynamics with transition matrices should be performed with care, and that using standard clustering algorithms to obtain states and transition probabilities may not always produce reliable results.

1992 five year battery forecast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amistadi, D.

1992-12-01

Five-year trends for automotive and industrial batteries are projected. Topic covered include: SLI shipments; lead consumption; automotive batteries (5-year annual growth rates); industrial batteries (standby power and motive power); estimated average battery life by area/country for 1989; US motor vehicle registrations; replacement battery shipments; potential lead consumption in electric vehicles; BCI recycling rates for lead-acid batteries; US average car/light truck battery life; channels of distribution; replacement battery inventory end July; 2nd US battery shipment forecast.

Effects of thermal fluctuations and fluid compressibility on hydrodynamic synchronization of microrotors at finite oscillatory Reynolds number: a multiparticle collision dynamics simulation study.

PubMed

Theers, Mario; Winkler, Roland G

2014-08-28

We investigate the emergent dynamical behavior of hydrodynamically coupled microrotors by means of multiparticle collision dynamics (MPC) simulations. The two rotors are confined in a plane and move along circles driven by active forces. Comparing simulations to theoretical results based on linearized hydrodynamics, we demonstrate that time-dependent hydrodynamic interactions lead to synchronization of the rotational motion. Thermal noise implies large fluctuations of the phase-angle difference between the rotors, but synchronization prevails and the ensemble-averaged time dependence of the phase-angle difference agrees well with analytical predictions. Moreover, we demonstrate that compressibility effects lead to longer synchronization times. In addition, the relevance of the inertia terms of the Navier-Stokes equation are discussed, specifically the linear unsteady acceleration term characterized by the oscillatory Reynolds number ReT. We illustrate the continuous breakdown of synchronization with the Reynolds number ReT, in analogy to the continuous breakdown of the scallop theorem with decreasing Reynolds number.

Predictive process simulation of cryogenic implants for leading edge transistor design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gossmann, Hans-Joachim; Zographos, Nikolas; Park, Hugh

2012-11-06

Two cryogenic implant TCAD-modules have been developed: (i) A continuum-based compact model targeted towards a TCAD production environment calibrated against an extensive data-set for all common dopants. Ion-specific calibration parameters related to damage generation and dynamic annealing were used and resulted in excellent fits to the calibration data-set. (ii) A Kinetic Monte Carlo (kMC) model including the full time dependence of ion-exposure that a particular spot on the wafer experiences, as well as the resulting temperature vs. time profile of this spot. It was calibrated by adjusting damage generation and dynamic annealing parameters. The kMC simulations clearly demonstrate the importancemore » of the time-structure of the beam for the amorphization process: Assuming an average dose-rate does not capture all of the physics and may lead to incorrect conclusions. The model enables optimization of the amorphization process through tool parameters such as scan speed or beam height.« less

Synergistic effects of lead thiocyanate additive and solvent annealing on the performance of wide-bandgap perovskite solar cells

DOE PAGES

Yu, Yue; Wang, Changlei; Grice, Corey R.; ...

2017-04-26

Here, we show that the cooperation of lead thiocyanate additive and a solvent annealing process can effectively increase the grain size of mixed-cation lead mixed-halide perovskite thin films while avoiding excess lead iodide formation. As a result, the average grain size of the wide-bandgap mixed-cation lead perovskite thin films increases from 66 ± 24 to 1036 ± 111 nm, and the mean carrier lifetime shows a more than 3-fold increase, from 330 ns to over 1000 ns. Consequently, the average open-circuit voltage of wide-bandgap perovskite solar cells increases by 80 (70) mV, and the average power conversion efficiency (PCE) increasesmore » from 13.44 ± 0.48 (11.75 ± 0.34) to 17.68 ± 0.36 (15.58 ± 0.55)% when measured under reverse (forward) voltage scans. The best-performing wide-bandgap perovskite solar cell, with a bandgap of 1.75 eV, achieves a stabilized PCE of 17.18%.« less

Preliminary study on assessment of lead exposure in Thai children aged between 3-7 years old who live in Umphang district, Tak Province.

PubMed

Neesanan, Naiyana; Kasemsup, Rachada; Ratanachuaeg, Suntree; Kojaranjit, Puangporn; Sakulnoom, Kim; Padungtod, Chantana

2011-08-01

Centers of Disease Control of the United States of America (CDC) informs Ministry of Public Health, Thailand that up to 13% of Burmese refugee children who are transferred to the United States of America during 2007-2009 have elevated blood lead levels (EBLL, Blood Lead Level > or = 10 microg/dl). These are children from a number of refugee camps in Tak Province; two camps are near Umphang but other camps are not. In June 2008, CDC, the result of investigation of Centers for Disease Control/Thailand Ministry of Public Health Collaboration (CDC/TUC) and International Organization for Migration, Thailand indicates that 33 of 64 children aged 6 months to 15 years (5.1%) who live in Mae La, Umpiem and Nupo camps have elevated blood lead level. However, no study on how Thai children who live nearby those camps are exposed to lead. Subsequently, Queen Sirikit National Institute of Child Health, Bangkok, Thailand contacts relevant organizations in Tak Province in order to investigate lead exposure and evaluate health status of Thai children who live close to Burmese refugee camps. 1) Evaluation of lead exposure of Thai children who live nearby Burmese refugee camps; 2) Assessment of risk factors on lead exposure of the children as mentioned above. The present study adopts a retrospective study based on information gathered from health assessment on 213 Thai children aged between 3-7 years old who live nearby Burmese refugee camps. The health assessment was conducted from April 30th, 2010 to May 5th, 2010. The information is from 3 sources. The first source is from blood sampling in order to assess lead level and ferritin level. The next source is from interview of persons who provide primary care in order to identify risk factors on lead exposure of target children. The last source is from physical examination and developmental assessment conducted by pediatricians and special nurses for child development in order to identify health and developmental problems. The population of the present study was 213 of Thai children are 3-7 years old, average age is 54.54 +/- 12.41 months-old. The average blood lead level is 7.71 +/- 4.62 microg/dl (range = 3-25 microg/dl). Elevated blood lead levels of all populations show that 57 children (26%) have blood lead level at 10 microg/dl or more. Analysis of odds by controlling all risk factors (adjusted OR) that effect on blood lead level (> or =10 microg/dl) indicates that only gender and source of drinking water are risk factors. To clarify, male children would have 2.8 times higher risk than female children. Children who drink water from tap and canal have 15 times and 72 times, respectively, higher risk than children drinking from bottle water. The result of the present study shows that 1 of 4 of Thai children at Umphang district, Tak Province who lived near Burmese refugee camps aged between 3-7 years old have blood lead level higher than concerning level. Thus, it is necessary to identify risk factors on lead exposure and policy of blood lead screening in some areas in Thailand.

Judgement of Breath Alcohol Concentration Levels Among Pedestrians in the Night-Time Economy-A Street-Intercept Field Study.

PubMed

Cameron, M P; Roskruge, M J; Droste, N; Miller, P G

2018-05-01

To evaluate how well people in the night-time economy can assess their own breath alcohol concentration (BrAC), in the context of a change in breath alcohol limits for driving. We conducted a field study of 242 participants over 5 nights in the central business district of a university town in New Zealand. Participants completed a short survey, which included questions on their self-reported level of intoxication and the self-estimated BrAC. At the conclusion of the interview each participant was breath-tested. We compared actual and self-estimated BrAC using a scatter plot and multiple regression methods. The average BrAC error was 61.7 μg/l, meaning that on average participants overestimate their BrAC. Participants with a BrAC below 487 μg/l tended to overestimate their BrAC on average, and those with a BrAC above 487 μg/l tended to underestimate their BrAC on average. Regression results supported this observation, but also found that men who are not 'out on a typical night' overestimate their BrAC by more. Drinkers in this naturalistic setting have little idea of their level of intoxication, as measured by BrAC. However, this uncertainty may be advantageous to public health outcomes, since if drinkers are uncertain about their level of intoxication relative to the legal limit, this may lead them to avoid drunk driving. A field study of drinkers in the night-time economy of a New Zealand university town was conducted to evaluate how well drinkers can assess their breath alcohol concentration (BrAC). Drinkers in this setting inaccurately estimate their intoxication, and those with higher BrAC tended to underestimate their BrAC on average.

Changes over time in audiometric thresholds in a group of automobile stamping and assembly workers with a hearing conservation program.

PubMed

Brink, LuAnn L; Talbott, Evelyn O; Burks, J Alton; Palmer, Catherine V

2002-01-01

Noise induced hearing loss (NIHL) is among the 10 leading occupational diseases, afflicting between 7.4 and 10.2 million people who work in noise above 85 dBA. Although mandatory hearing conservation programs (HCPs) have been in effect since 1972, this problem persists, as hearing protectors are not consistently used by workers, or may not attenuate to manufacturer's estimates in real world conditions. In this study, information from noise and hearing protection use measurements taken at an automobile assembly plant were used to construct average lifetime noise exposure and hearing protection compliance estimates for use in modeling to predict both total hearing loss and onset of two accepted definitions of hearing loss. There were 301 males and females in this cohort; their mean age was 42.6 (7.2) years, and mean tenure was 14.3 (3.5) years. Average length of follow-up was 14.0 years. There were 16 members of this cohort who had hearing loss at the speech frequencies (defined as an average hearing level > or = 25 dB at 500, 1000, and 2000 Hz). In cross-sectional multivariate analyses, years of employment, male gender, and proportion of time wearing hearing protection were the factors most associated with hearing loss at the average of 2000, 3000, and 4000 Hz (p < 0.0001) controlling for age, transfer status (as a surrogate for previous noise exposure), race, and lifetime average noise exposure. The most consistent predictor of hearing loss in both univariate and multivariate analyses was percentage of time having used hearing protection during the workers' tenure.

Research and Industrial Application of a Process for Direct Reduction of Molten High-Lead Smelting Slag

NASA Astrophysics Data System (ADS)

Li, Weifeng; Zhan, Jing; Fan, Yanqing; Wei, Chang; Zhang, Chuanfu; Hwang, Jiann-Yang

2017-04-01

A pyrometallurgical process for the direct reduction of molten high-lead smelting slag obtained by the Shuikoushan (SKS) method was reported in this article using solid anthracite as the fuel and reductant. The chemical composition, the lead phase composition, and the physical properties of the molten high-lead slag were examined. The effects of the process parameters on the recovery rate of valued metals were investigated in the laboratory. According to the experimental results, a new efficient bottom blow reduction furnace was employed in the pilot-scale test for high-lead slag reduction. The results showed the average recovery rate of lead was more than 96.0% with lower Pb and high Zn content of the reducing slag under the condition of reduction temperature 1100-1200°C, coal ratio 5.5-7.5%, reduction time 90-150 min, CaO/SiO2 ratio 0.35-0.45, and FeO/SiO2 ratio 1.4-1.55. Moreover, nearly 250 kg of standard coal per ton of crude Pb output was reduced compared with the blast furnace reduction process.

Exposure assessment of JAVELIN missile combustion products

NASA Astrophysics Data System (ADS)

Lundy, Donald O.; Langford, Roland E.

1994-02-01

Characterization and analysis of combustion products resulting from firing the JAVELIN missile were performed. Of those combustion products analyzed, it was determined that airborne lead concentrations exceeded the OSHA PEL of 50 micrograms each time the missile was fired while in the enclosure. Since the OSHA PEL standard is based upon a continuous rather than a short-term exposures blood lead concentrations were sought to ascertain the relationship between a short duration airborne exposure and its physiological effect on the body. Blood lead levels were taken on 49 test subjects prior to various JAVELIN missile test firings. Of those 49, 21 were outfitted With personal sampling equipment to determine airborne concentrations at the Assistant Gunner and Gunner positions. Periodic blood sampling after a single exposure showed an average increase of 2.27 micrograms/dL for all test subjects. Recommendations were made to consider changes in the positioning of the enclosure inhabitants to minimize airborne lead concentrations, to limit the number of missiles fired (situation dependent), and replacement of the lead B-resorcyolate with a non-lead containing burn rate modifier for the launch motor.

Receiver design, performance analysis, and evaluation for space-borne laser altimeters and space-to-space laser ranging systems

NASA Technical Reports Server (NTRS)

Davidson, Frederic M.; Sun, Xiaoli; Field, Christopher T.

1995-01-01

Laser altimeters measure the time of flight of the laser pulses to determine the range of the target. The simplest altimeter receiver consists of a photodetector followed by a leading edge detector. A time interval unit (TIU) measures the time from the transmitted laser pulse to the leading edge of the received pulse as it crosses a preset threshold. However, the ranging error of this simple detection scheme depends on the received, pulse amplitude, pulse shape, and the threshold. In practice, the pulse shape and the amplitude are determined by the target target characteristics which has to be assumed unknown prior to the measurement. The ranging error can be improved if one also measures the pulse width and use the average of the leading and trailing edges (half pulse width) as the pulse arrival time. The ranging error becomes independent of the received pulse amplitude and the pulse width as long as the pulse shape is symmetric. The pulse width also gives the slope of the target. The ultimate detection scheme is to digitize the received waveform and calculate the centroid as the pulse arrival time. The centroid detection always gives unbiased measurement even for asymmetric pulses. In this report, we analyze the laser altimeter ranging errors for these three detection schemes using the Mars Orbital Laser Altimeter (MOLA) as an example.

Reduction of lead concentrations in vegetables grown in Tarragona Province, Spain, as a consequence of reduction of lead in gasoline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belles, M.; Rico, A.; Schuhmacher, M.

1995-12-31

Lead concentrations were determined in 350 samples belonging to 13 different species of vegetables from Tarragona Province, Spain. The samples were subjected to lead analyses by graphite furnace atomic absorption spectrophotometry. During the period 1989-1994, an average decrease for lead concentrations of 69% was estimated. Spinach showed the lowest reduction2 in lead content (6%), while the highest decreases were observed for onion (87%) and leek (90%). Taking into account the average consumption of vegetable foodstuffs by the population of Tarragona Province, the daily lead intake through edible vegetables was reduced from 41.5 {mu}g/d in 1989 to 10.6 {mu}g/d in 1994.more » The results of the current study demonstrate a substantial decline in the lead levels of vegetables from Tarragona Province. The major cause of this decline is most likely the reduced leaded gasoline consumption.« less

Application of a deconvolution method for identifying burst amplitudes and arrival times in Alcator C-Mod far SOL plasma fluctuations

NASA Astrophysics Data System (ADS)

Theodorsen, Audun; Garcia, Odd Erik; Kube, Ralph; Labombard, Brian; Terry, Jim

2017-10-01

In the far scrape-off layer (SOL), radial motion of filamentary structures leads to excess transport of particles and heat. Amplitudes and arrival times of these filaments have previously been studied by conditional averaging in single-point measurements from Langmuir Probes and Gas Puff Imaging (GPI). Conditional averaging can be problematic: the cutoff for large amplitudes is mostly chosen by convention; the conditional windows used may influence the arrival time distribution; and the amplitudes cannot be separated from a background. Previous work has shown that SOL fluctuations are well described by a stochastic model consisting of a super-position of pulses with fixed shape and randomly distributed amplitudes and arrival times. The model can be formulated as a pulse shape convolved with a train of delta pulses. By choosing a pulse shape consistent with the power spectrum of the fluctuation time series, Richardson-Lucy deconvolution can be used to recover the underlying amplitudes and arrival times of the delta pulses. We apply this technique to both L and H-mode GPI data from the Alcator C-Mod tokamak. The pulse arrival times are shown to be uncorrelated and uniformly distributed, consistent with a Poisson process, and the amplitude distribution has an exponential tail.

Lead distribution in Permo-Carboniferous coal from the North China Plate, China.

PubMed

Kunli, Luo; Jidong, Lu; Lianwu, Chen

2005-02-01

The content and distribution of the lead in coal, gangue and the sulfur ball and the pyritic gangue of the Permo-Carboniferous in the North China Plate have been systematically studied (nearly 300 samples) in this paper. The Permo-Carboniferous coals in the North China Plate account for nearly 44.45% of total Chinese coal resources, and most of the steam coals in China come from the Permo-Carboniferous coals in the North China Plate. The result shows that lead content in the coal varied from 1.45 to 63.60 mg kg(-1), averaging 23.95 mg kg(-1); the lead content of the sulfur ball and the pyritic gangue in the coal seam ranges from 70.26-1060 mg kg(-1), with an average of 271.28 mg kg(-1); the lead content of the gangue is from 29.5 to 77.81 mg kg(-1), averaging at 40.77 mg kg(-1). The lead in the coal seam is mainly concentrated in the pyrite, such as sulfur ball, pyritic gangue or pyrite, and is the least concentrated in the organic of coal. The content of the lead has a direct ratio with the ash and the pyretic sulfur. Coal washing can reduce the content of the pyretic sulfur and the lead.

Sea level forecasts for Pacific Islands based on Satellite Altimetry

NASA Astrophysics Data System (ADS)

Yoon, H.; Merrifield, M. A.; Thompson, P. R.; Widlansky, M. J.; Marra, J. J.

2017-12-01

Coastal flooding at tropical Pacific Islands often occurs when positive sea level anomalies coincide with high tides. To help mitigate this risk, a forecast tool for daily-averaged sea level anomalies is developed that can be added to predicted tides at tropical Pacific Island sites. The forecast takes advantage of the observed westward propagation that sea level anomalies exhibit over a range of time scales. The daily near-real time altimetry gridded data from Archiving, Validation, and Interpretation of Satellite Oceanographic (AVISO) is used to specify upstream sea level at each site, with lead times computed based on mode-one baroclinic Rossby wave speeds. To validate the forecast, hindcasts are compared to tide gauge and nearby AVISO gridded time series. The forecast skills exceed persistence at most stations out to a month or more lead time. The skill is highest at stations where eddy variability is relatively weak. The impacts on the forecasts due to varying propagation speed, decay time, and smoothing of the AVISO data are examined. In addition, the inclusion of forecast winds in a forced wave equation is compared to the freely propagating results. Case studies are presented for seasonally high tide events throughout the Pacific Island region.

Pion-Kaon correlations in central Au+Au collisions at square root [sNN] = 130 GeV.

PubMed

Adams, J; Adler, C; Aggarwal, M M; Ahammed, Z; Amonett, J; Anderson, B D; Anderson, M; Arkhipkin, D; Averichev, G S; Badyal, S K; Balewski, J; Barannikova, O; Barnby, L S; Baudot, J; Bekele, S; Belaga, V V; Bellwied, R; Berger, J; Bezverkhny, B I; Bhardwaj, S; Bhaskar, P; Bhati, A K; Bichsel, H; Billmeier, A; Bland, L C; Blyth, C O; Bonner, B E; Botje, M; Boucham, A; Brandin, A; Bravar, A; Cadman, R V; Cai, X Z; Caines, H; Calderón de la Barca Sánchez, M; Carroll, J; Castillo, J; Castro, M; Cebra, D; Chaloupka, P; Chattopadhyay, S; Chen, H F; Chen, Y; Chernenko, S P; Cherney, M; Chikanian, A; Choi, B; Christie, W; Coffin, J P; Cormier, T M; Cramer, J G; Crawford, H J; Das, D; Das, S; Derevschikov, A A; Didenko, L; Dietel, T; Dong, X; Draper, J E; Du, F; Dubey, A K; Dunin, V B; Dunlop, J C; Dutta Majumdar, M R; Eckardt, V; Efimov, L G; Emelianov, V; Engelage, J; Eppley, G; Erazmus, B; Fachini, P; Faine, V; Faivre, J; Fatemi, R; Filimonov, K; Filip, P; Finch, E; Fisyak, Y; Flierl, D; Foley, K J; Fu, J; Gagliardi, C A; Ganti, M S; Gutierrez, T D; Gagunashvili, N; Gans, J; Gaudichet, L; Germain, M; Geurts, F; Ghazikhanian, V; Ghosh, P; Gonzalez, J E; Grachov, O; Grigoriev, V; Gronstal, S; Grosnick, D; Guedon, M; Guertin, S M; Gupta, A; Gushin, E; Hallman, T J; Hardtke, D; Harris, J W; Heinz, M; Henry, T W; Heppelmann, S; Herston, T; Hippolyte, B; Hirsch, A; Hjort, E; Hoffmann, G W; Horsley, M; Huang, H Z; Huang, S L; Humanic, T J; Igo, G; Ishihara, A; Jacobs, P; Jacobs, W W; Janik, M; Johnson, I; Jones, P G; Judd, E G; Kabana, S; Kaneta, M; Kaplan, M; Keane, D; Kiryluk, J; Kisiel, A; Klay, J; Klein, S R; Klyachko, A; Koetke, D D; Kollegger, T; Konstantinov, A S; Kopytine, M; Kotchenda, L; Kovalenko, A D; Kramer, M; Kravtsov, P; Krueger, K; Kuhn, C; Kulikov, A I; Kumar, A; Kunde, G J; Kunz, C L; Kutuev, R Kh; Kuznetsov, A A; Lamont, M A C; Landgraf, J M; Lange, S; Lansdell, C P; Lasiuk, B; Laue, F; Lauret, J; Lebedev, A; Lednický, R; Leontiev, V M; LeVine, M J; Li, C; Li, Q; Lindenbaum, S J; Lisa, M A; Liu, F; Liu, L; Liu, Z; Liu, Q J; Ljubicic, T; Llope, W J; Long, H; Longacre, R S; Lopez-Noriega, M; Love, W A; Ludlam, T; Lynn, D; Ma, J; Ma, Y G; Magestro, D; Mahajan, S; Mangotra, L K; Mahapatra, D P; Majka, R; Manweiler, R; Margetis, S; Markert, C; Martin, L; Marx, J; Matis, H S; Matulenko, Yu A; McShane, T S; Meissner, F; Melnick, Yu; Meschanin, A; Messer, M; Miller, M L; Milosevich, Z; Minaev, N G; Mironov, C; Mishra, D; Mitchell, J; Mohanty, B; Molnar, L; Moore, C F; Mora-Corral, M J; Morozov, V; de Moura, M M; Munhoz, M G; Nandi, B K; Nayak, S K; Nayak, T K; Nelson, J M; Nevski, P; Nikitin, V A; Nogach, L V; Norman, B; Nurushev, S B; Odyniec, G; Ogawa, A; Okorokov, V; Oldenburg, M; Olson, D; Paic, G; Pandey, S U; Pal, S K; Panebratsev, Y; Panitkin, S Y; Pavlinov, A I; Pawlak, T; Perevoztchikov, V; Peryt, W; Petrov, V A; Phatak, S C; Picha, R; Planinic, M; Pluta, J; Porile, N; Porter, J; Poskanzer, A M; Potekhin, M; Potrebenikova, E; Potukuchi, B V K S; Prindle, D; Pruneau, C; Putschke, J; Rai, G; Rakness, G; Raniwala, R; Raniwala, S; Ravel, O; Ray, R L; Razin, S V; Reichhold, D; Reid, J G; Renault, G; Retiere, F; Ridiger, A; Ritter, H G; Roberts, J B; Rogachevski, O V; Romero, J L; Rose, A; Roy, C; Ruan, L J; Rykov, V; Sahoo, R; Sakrejda, I; Salur, S; Sandweiss, J; Savin, I; Schambach, J; Scharenberg, R P; Schmitz, N; Schroeder, L S; Schweda, K; Seger, J; Seliverstov, D; Seyboth, P; Shahaliev, E; Shao, M; Sharma, M; Shestermanov, K E; Shimanskii, S S; Singaraju, R N; Simon, F; Skoro, G; Smirnov, N; Snellings, R; Sood, G; Sorensen, P; Sowinski, J; Spinka, H M; Srivastava, B; Stanislaus, S; Stock, R; Stolpovsky, A; Strikhanov, M; Stringfellow, B; Struck, C; Suaide, A A P; Sugarbaker, E; Suire, C; Sumbera, M; Surrow, B; Symons, T J M; Szanto de Toledo, A; Szarwas, P; Tai, A; Takahashi, J; Tang, A H; Thein, D; Thomas, J H; Tikhomirov, V; Tokarev, M; Tonjes, M B; Trainor, T A; Trentalange, S; Tribble, R E; Trivedi, M D; Trofimov, V; Tsai, O; Ullrich, T; Underwood, D G; Van Buren, G; VanderMolen, A M; Vasiliev, A N; Vasiliev, M; Vigdor, S E; Viyogi, Y P; Voloshin, S A; Waggoner, W; Wang, F; Wang, G; Wang, X L; Wang, Z M; Ward, H; Watson, J W; Wells, R; Westfall, G D; Whitten, C; Wieman, H; Willson, R; Wissink, S W; Witt, R; Wood, J; Wu, J; Xu, N; Xu, Z; Xu, Z Z; Yakutin, A E; Yamamoto, E; Yang, J; Yepes, P; Yurevich, V I; Zanevski, Y V; Zborovský, I; Zhang, H; Zhang, H Y; Zhang, W M; Zhang, Z P; Zołnierczuk, P A; Zoulkarneev, R; Zoulkarneeva, J; Zubarev, A N

2003-12-31

Pion-kaon correlation functions are constructed from central Au+Au STAR data taken at sqrt[s(NN)]=130 GeV by the STAR detector at the Relativistic Heavy Ion Collider (RHIC). The results suggest that pions and kaons are not emitted at the same average space-time point. Space-momentum correlations, i.e., transverse flow, lead to a space-time emission asymmetry of pions and kaons that is consistent with the data. This result provides new independent evidence that the system created at RHIC undergoes a collective transverse expansion.

Examining a scaled dynamical system of telomere shortening

NASA Astrophysics Data System (ADS)

Cyrenne, Benoit M.; Gooding, Robert J.

2015-02-01

A model of telomere dynamics is proposed and examined. Our model, which extends a previously introduced model that incorporates stem cells as progenitors of new cells, imposes the Hayflick limit, the maximum number of cell divisions that are possible. This new model leads to cell populations for which the average telomere length is not necessarily a monotonically decreasing function of time, in contrast to previously published models. We provide a phase diagram indicating where such results would be expected via the introduction of scaled populations, rate constants and time. The application of this model to available leukocyte baboon data is discussed.

Evaluating RVUs as a measure of workload for use in assessing fatigue

NASA Astrophysics Data System (ADS)

Krupinski, Elizabeth A.; MacKinnon, Lea; Hasselbach, Karl; Taljanovic, Mihra

2015-03-01

Physician work is not well defined and does not take into account all of the activities and tasks involved in interpreting cases. We observed 3 MSK radiologists reading 100 cases. We recorded types of cases, whether residents/fellows were present, total time per case, time spent teaching, and time for interruptions. There were residents/fellows present for 65% of the cases. On average, when residents/fellows were present it took significantly longer to read a case. Overall, prior studies were accessed for 25% of the cases, with radiographs and CT accessing them more than MRI and US. Time per case was significantly longer when prior studies were included. In terms of interruptions, 9.24% of the time was taken up by calls to/from other clinicians, talking to technologists, discussing case protocols, and technical problems. All interruptions occurred during a case review. We downloaded RVU data for the 3 radiologists and correlated them with the actual times per case. The overall correlation was 0.215. For a given RVU, the actual amount of time spent on the case varies. Radiologists spend more time per case than assigned RVUs account for. This underestimation contributes to expectations of increased workloads, leading potentially to more and more cases being read in shorter amounts of time leading to increased fatigue and stress that could lead to increases in error rates. In order to better address fatigue and stress in the radiology department we need to better understand the pressures radiologists face and possibly reevaluate the RVU system.

Grain-Size-Limited Mobility in Methylammonium Lead Iodide Perovskite Thin Films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, Obadiah G.; Yang, Mengjin; Kopidakis, Nikos

2016-09-09

We report a systematic study of the gigahertz-frequency charge carrier mobility found in methylammonium lead iodide perovskite films as a function of average grain size using time-resolved microwave conductivity and a single processing chemistry. Our measurements are in good agreement with the Kubo formula for the AC mobility of charges confined within finite grains, suggesting (1) that the surface grains imaged via scanning electron microscopy are representative of the true electronic domain size and not substantially subdivided by twinning or other defects not visible by microscopy and (2) that the time scale of diffusive transport across grain boundaries is muchmore » slower than the period of the microwave field in this measurement (-100 ps). The intrinsic (infinite grain size) minimum mobility extracted form the model is 29 +/- 6 cm2 V-1 s-1 at the probe frequency (8.9 GHz).« less

Intrinsic Viscosity of Dendrimers via Equilibrium Molecular Dynamics

NASA Astrophysics Data System (ADS)

Drew, Phil; Adolf, David

2004-03-01

Equilibrium molecular dynamics simulations of dendrimers in dilute solution have been performed using dl-poly. Analysis of the system stress tensor via the Green-Kubo formula produces the viscosity of the dendrimer solution which, when coupled with that of a solvent only system leads to the intrinsic viscosity of the dendrimer solute. Particular attention has been paid to error analysis as the auto-correlation of the stress tensor exhibits a long time tail, potentially leading to large uncertainties in the solution, and hence intrinsic, viscosities. In order to counter this effect and provide reliable statistical averaging, simulations have been run spanning very many times the longest system relaxation. Comparison is made to previous studies, using different techniques, which suggest a peak in the intrinsic viscosity of dendrimers at around generation four. Results are also presented from investigations in to the individual contributions to the system stress tensor from the solvent and the solute.

Traveltime and longitudinal dispersion in Illinois streams

USGS Publications Warehouse

Graf, J.B.

1984-01-01

Twenty-seven measurements of traveltime and longitudinal dispersion in 10 Illinois streams provide data needed for estimating traveltime of peak concentration of a conservative solute, traveltime of the leading edge of a solute cloud, peak concentration resulting from a given quantity of solute, and passage time of solute past a given point on a stream for both measured and unmeasured streams. Traveltime of peak concentration and of the leading edge of the cloud are related to discharge at the downstream end of the reach, distance of travel, and the fraction of the time that discharge at a given location on the stream is equaled or exceeded. Peak concentration and passage time are best estimated from the relation of each to traveltime. In measured streams, dispersion efficiency is greater than that predicted by Fickian diffusion theory. The rate of decrease in peak concentration with traveltime is about equal to the rate of increase in passage time. Average velocity in a stream reach, given by the velocity of the center of solute mass in that reach, also can be estimated from an equation developed from measured values. (USGS)

Cycles in oceanic teleconnections and global temperature change

NASA Astrophysics Data System (ADS)

Seip, Knut L.; Grøn, Øyvind

2018-06-01

Three large ocean currents are represented by proxy time series: the North Atlantic Oscillation (NAO), the Southern Oscillation Index (SOI), and the Pacific Decadal Oscillation (PDO). We here show how proxies for the currents interact with each other and with the global temperature anomaly (GTA). Our results are obtained by a novel method, which identifies running average leading-lagging (LL) relations, between paired series. We find common cycle times for a paired series of 6-7 and 25-28 years and identify years when the LL relations switch. Switching occurs with 18.4 ± 14.3-year intervals for the short 6-7-year cycles and with 27 ± 15-year intervals for the 25-28-year cycles. During the period 1940-1950, the LL relations for the long cycles were circular (nomenclature x leads y: x → y): GTA → NAO → SOI → PDO → GTA. However, after 1960, the LL relations become more complex and there are indications that GTA leads to both NAO and PDO. The switching years are related to ocean current tie points and reversals reported in the literature.

40 CFR 464.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0187 Lead (T) 0.0237 0.0116 Zinc (T) 0.0339 0.0129 Maximum for any 1 day Maximum for monthly average...

40 CFR 464.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0187 Lead (T) 0.0237 0.0116 Zinc (T) 0.0339 0.0129 Maximum for any 1 day Maximum for monthly average...

Transboundary atmospheric lead pollution.

PubMed

Erel, Yigal; Axelrod, Tamar; Veron, Alain; Mahrer, Yitzak; Katsafados, Petros; Dayan, Uri

2002-08-01

A high-temporal resolution collection technique was applied to refine aerosol sampling in Jerusalem, Israel. Using stable lead isotopes, lead concentrations, synoptic data, and atmospheric modeling, we demonstrate that lead detected in the atmosphere of Jerusalem is not only anthropogenic lead of local origin but also lead emitted in other countries. Fifty-seven percent of the collected samples contained a nontrivial fraction of foreign atmospheric lead and had 206Pb/207Pb values which deviated from the local petrol-lead value (206Pb/207Pb = 1.113) by more than two standard deviations (0.016). Foreign 206Pb/207Pb values were recorded in Jerusalem on several occasions. The synoptic conditions on these dates and reported values of the isotopic composition of lead emitted in various countries around Israel suggest that the foreign lead was transported to Jerusalem from Egypt, Turkey, and East Europe. The average concentration of foreign atmospheric lead in Jerusalem was 23 +/- 17 ng/m3, similar to the average concentration of local atmospheric lead, 21 +/- 18 ng/ m3. Hence, the load of foreign atmospheric lead is similar to the load of local atmospheric lead in Jerusalem.

The relationship between limit of Dysphagia and average volume per swallow in patients with Parkinson's disease.

PubMed

Belo, Luciana Rodrigues; Gomes, Nathália Angelina Costa; Coriolano, Maria das Graças Wanderley de Sales; de Souza, Elizabete Santos; Moura, Danielle Albuquerque Alves; Asano, Amdore Guescel; Lins, Otávio Gomes

2014-08-01

The goal of this study was to obtain the limit of dysphagia and the average volume per swallow in patients with mild to moderate Parkinson's disease (PD) but without swallowing complaints and in normal subjects, and to investigate the relationship between them. We hypothesize there is a direct relationship between these two measurements. The study included 10 patients with idiopathic PD and 10 age-matched normal controls. Surface electromyography was recorded over the suprahyoid muscle group. The limit of dysphagia was obtained by offering increasing volumes of water until piecemeal deglutition occurred. The average volume per swallow was calculated by dividing the time taken by the number of swallows used to drink 100 ml of water. The PD group showed a significantly lower dysphagia limit and lower average volume per swallow. There was a significantly moderate direct correlation and association between the two measurements. About half of the PD patients had an abnormally low dysphagia limit and average volume per swallow, although none had spontaneously related swallowing problems. Both measurements may be used as a quick objective screening test for the early identification of swallowing alterations that may lead to dysphagia in PD patients, but the determination of the average volume per swallow is much quicker and simpler.

Preference for facial averageness: Evidence for a common mechanism in human and macaque infants

PubMed Central

Damon, Fabrice; Méary, David; Quinn, Paul C.; Lee, Kang; Simpson, Elizabeth A.; Paukner, Annika; Suomi, Stephen J.; Pascalis, Olivier

2017-01-01

Human adults and infants show a preference for average faces, which could stem from a general processing mechanism and may be shared among primates. However, little is known about preference for facial averageness in monkeys. We used a comparative developmental approach and eye-tracking methodology to assess visual attention in human and macaque infants to faces naturally varying in their distance from a prototypical face. In Experiment 1, we examined the preference for faces relatively close to or far from the prototype in 12-month-old human infants with human adult female faces. Infants preferred faces closer to the average than faces farther from it. In Experiment 2, we measured the looking time of 3-month-old rhesus macaques (Macaca mulatta) viewing macaque faces varying in their distance from the prototype. Like human infants, macaque infants looked longer to faces closer to the average. In Experiments 3 and 4, both species were presented with unfamiliar categories of faces (i.e., macaque infants tested with adult macaque faces; human infants and adults tested with infant macaque faces) and showed no prototype preferences, suggesting that the prototypicality effect is experience-dependent. Overall, the findings suggest a common processing mechanism across species, leading to averageness preferences in primates. PMID:28406237

Effects of lead and hydrocarbons from snowmobile exhaust on brook trout (Salvelinus fontinalis)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, E.S.

1975-01-01

Lead and hydrocarbons from snowmobile exhaust were found in the water at high levels during the week following ice-out in a Maine pond. Fingerling brook trout (Salvelinus fontinalis) held in fish cages in the pond showed lead and hydrocarbon uptake. These contaminants accumulated during the previous winter when snowmobile operation on the pond was equivalent to one snowmobile burning 250 liters of fuel per season on a .405 hectare pond with average depth of 1 m. Lead content of the water rose from 4.1 ppb before snowmobiling to 135 ppb at ice-out; exposed trout contained 9 to 16 times moremore » lead than controls. Hydrocarbon levels undetectable prior to snowmobiling reached 10 ppm in the water and 1 ppm in exposed fish. Trout held in aquaria for 3 weeks in melted snow containing three different concentrations of snowmobile exhaust also showed lead and hydrocarbon uptake. Their digestive tract tissue contained the most lead (2 ppm) and gills the least (0.2 ppm). Stamina, as measured by the ability to swim against a current, was significantly less in trout exposed to snowmobile exhaust than in control fish. (auth)« less

Complexation of lead by Bermuda grass root exudates in aqueous media.

PubMed

Thomas, Catherine; Butler, Afrachanna; Larson, Steven; Medina, Victor; Begonia, Maria

2014-01-01

Exudates produced from Bermuda grass roots were collected in deionized water from sterilized Bermuda grass sod at 3-day intervals over a period of 15 days. Exudates were analyzed for total organic carbon, and characterized via Fourier Transform Infrared Spectroscopy. Exudate samples were adjusted to pH values of 4.5, 6.5, and 7.5, amended with lead and quantified for soluble and complexed lead via Inductively Coupled Plasma--Optical Emission Spectrometry. Data obtained from total organic carbon measurements indicated compositional changes in Bermuda grass root exudates as organic carbon concentrations increased over time. Analysis of the infrared spectroscopy data indicated that carboxylic acids and amine functional groups were present in root exudates. Also, the ability of root-exuded compounds to solubilize lead in aqueous media was demonstrated as exudate samples dissolved an average of 60% more lead than deionized water. At pH values 4.5 and 7.5, lead complexation by Bermuda grass root exudates increased with decreasing molecular weight size fractions, while an opposite trend was observed at pH 6.5. Results from this study demonstrated the ability of Bermuda grass root exudates to complex lead in aqueous media.

Finding hidden periodic signals in time series - an application to stock prices

NASA Astrophysics Data System (ADS)

O'Shea, Michael

2014-03-01

Data in the form of time series appear in many areas of science. In cases where the periodicity is apparent and the only other contribution to the time series is stochastic in origin, the data can be `folded' to improve signal to noise and this has been done for light curves of variable stars with the folding resulting in a cleaner light curve signal. Stock index prices versus time are classic examples of time series. Repeating patterns have been claimed by many workers and include unusually large returns on small-cap stocks during the month of January, and small returns on the Dow Jones Industrial average (DJIA) in the months June through September compared to the rest of the year. Such observations imply that these prices have a periodic component. We investigate this for the DJIA. If such a component exists it is hidden in a large non-periodic variation and a large stochastic variation. We show how to extract this periodic component and for the first time reveal its yearly (averaged) shape. This periodic component leads directly to the `Sell in May and buy at Halloween' adage. We also drill down and show that this yearly variation emerges from approximately half of the underlying stocks making up the DJIA index.

Averaging and Adding in Children's Worth Judgements

ERIC Educational Resources Information Center

Schlottmann, Anne; Harman, Rachel M.; Paine, Julie

2012-01-01

Under the normative Expected Value (EV) model, multiple outcomes are additive, but in everyday worth judgement intuitive averaging prevails. Young children also use averaging in EV judgements, leading to a disordinal, crossover violation of utility when children average the part worths of simple gambles involving independent events (Schlottmann,…

The impact of the fast ion fluxes and thermal plasma loads on the design of the ITER fast ion loss detector

NASA Astrophysics Data System (ADS)

Kocan, M.; Garcia-Munoz, M.; Ayllon-Guerola, J.; Bertalot, L.; Bonnet, Y.; Casal, N.; Galdon, J.; Garcia-Lopez, J.; Giacomin, T.; Gonzalez-Martin, J.; Gunn, J. P.; Rodriguez-Ramos, M.; Reichle, R.; Rivero-Rodriguez, J. F.; Sanchis-Sanchez, L.; Vayakis, G.; Veshchev, E.; Vorpahl, C.; Walsh, M.; Walton, R.

2017-12-01

Thermal plasma loads to the ITER Fast Ion Loss Detector are studied for QDT = 10 burning plasma equilibrium using the 3D field line tracing. The simulations are performed for a FILD insertion 9-13 cm past the port plasma facing surface, optimized for fast ion measurements, and include the worst-case perturbation of the plasma boundary and the error in the magnetic reconstruction. The FILD head is exposed to superimposed time-averaged ELM heat load, static inter-ELM heat flux and plasma radiation. The study includes the estimate of the instantaneous temperature rise due to individual 0.6 MJ controlled ELMs. The maximum time-averaged surface heat load is lesssim 12 MW/m2 and will lead to increase of the FILD surface temperature well below the melting temperature of the materials considered here, for the FILD insertion time of 0.2 s. The worst-case instantaneous temperature rise during controlled 0.6 MJ ELMs is also significantly smaller than the melting temperature of e.g. Tungsten or Molybdenum, foreseen for the FILD housing.

Single-Trial Analysis of Inter-Beat Interval Perturbations Accompanying Single-Switch Scanning: Case Series of Three Children With Severe Spastic Quadriplegic Cerebral Palsy.

PubMed

Leung, Brian; Chau, Tom

2016-02-01

Single-switch access in conjunction with scanning remains a fundamental solution in restoring communication for many children with profound physical disabilities. However, untimely switch inaction and unintentional switch activations can lead to user frustration and impede functional communication. A previous preliminary study, in the context of a case series with three single-switch users, reported that correct, accidental and missed switch activations could elicit cardiac deceleration and increased phasic skin conductance on average, while deliberate switch non-use was associated with autonomic nonresponse. The present study investigated the possibility of using blood volume pulse recordings from the same three pediatric single-switch users to track the aforementioned switch events on a single-trial basis. Peaks of the line length time series derived from the empirical mode decomposition of the inter-beat interval time series matched, on average, a high percentage (above 80%) of single-switch events, while unmatched peaks coincided moderately (below 37%) with idle time during scanning. These results encourage further study of autonomic measures as complementary information channels to enhance single-switch access.

The influence of economic business cycles on United States suicide rates.

PubMed

Wasserman, I M

1984-01-01

A number of social science investigators have shown that a downturn in the economy leads to an increase in the suicide rate. However, the previous works on the subject are flawed by the fact that they employ years as their temporal unit of analysis. This time period is so large that it makes it difficult for investigators to precisely determine the length of the lag effect, while at the same time removing the autocorrelation effects. Also, although most works on suicide and the business cycle employ unemployment as a measure of a downturn in the business cycle, the average duration of unemployment represents a better measure for determining the social impact of an economic downturn. From 1947 to 1977 the average monthly duration of unemployment is statistically related to the suicide rate using multivariate time-series analysis. From 1910 to 1939 the Ayres business index, a surrogate measure for movement in the business cycle, is statistically related to the monthly suicide rate. An examination of the findings confirms that in most cases a downturn in the economy causes an increase in the suicide rate.

Impact of clocking on the aero-thermodynamics of a second stator tested in a one and a half stage HP turbine

NASA Astrophysics Data System (ADS)

Billiard, N.; Paniagua, Guillermo; Dénos, R.

2008-06-01

This paper focuses on the experimental investigation of the time-averaged and time-accurate aero-thermodynamics of a second stator tested in a 1.5 stage high-pressure turbine. The effect of clocking on aerodynamic and heat transfer are investigated. Tests are performed under engine representative conditions in the VKI compression tube CT3. The test program includes four different clocking positions, i.e. relative pitch-wise positions between the first and the second stator. Probes located upstream and downstream of the second stator provide the thermodynamic conditions of the flow field. On the second stator airfoil, measurements are taken around the blade profile at 15, 50 and 85% span with pressure sensors and thin-film gauges. Both time-averaged and time-resolved aspects of the flow field are addressed. Regarding the time-averaged results, clocking effects are mainly observed within the leading edge region of the second stator, the largest effects being observed at 15% span. The surface static pressure distribution is changed locally, hence affecting the overall airfoil performance. For one clocking position, the thermal load of the airfoil is noticeably reduced. Pressure fluctuations are attributed to the passage of the upstream transonic rotor and its associated pressure gradients. The pattern of these fluctuations changes noticeably as a function of clocking. The time-resolved variations of heat flux and static pressure are analyzed together showing that the major effect is due to a potential interaction. The time-resolved pressure distribution integrated along the second stator surface yields the unsteady forces on the vane. The magnitude of the unsteady force is very dependent on the clocking position.

Impact of add-on laboratory testing at an academic medical center: a five year retrospective study.

PubMed

Nelson, Louis S; Davis, Scott R; Humble, Robert M; Kulhavy, Jeff; Aman, Dean R; Krasowski, Matthew D

2015-01-01

Clinical laboratories frequently receive orders to perform additional tests on existing specimens ('add-ons'). Previous studies have examined add-on ordering patterns over short periods of time. The objective of this study was to analyze add-on ordering patterns over an extended time period. We also analyzed the impact of a robotic specimen archival/retrieval system on add-on testing procedure and manual effort. In this retrospective study at an academic medical center, electronic health records from were searched to obtain all add-on orders that were placed in the time period of May 2, 2009 to December 31, 2014. During the time period of retrospective study, 880,359 add-on tests were ordered on 96,244 different patients. Add-on testing comprised 3.3 % of total test volumes. There were 443,411 unique ordering instances, leading to an average of 1.99 add-on tests per instance. Some patients had multiple episodes of add-on test orders at different points in time, leading to an average of 9.15 add-on tests per patient. The majority of add-on orders were for chemistry tests (78.8 % of total add-ons) with the next most frequent being hematology and coagulation tests (11.2 % of total add-ons). Inpatient orders accounted for 66.8 % of total add-on orders, while the emergency department and outpatient clinics had 14.8 % and 18.4 % of total add-on orders, respectively. The majority of add-ons were placed within 8 hours (87.3 %) and nearly all by 24 hours (96.8 %). Nearly 100 % of add-on orders within the emergency department were placed within 8 hours. The introduction of a robotic specimen archival/retrieval unit saved an average of 2.75 minutes of laboratory staff manual time per unique add-on order. This translates to 24.1 hours/day less manual effort in dealing with add-on orders. Our study reflects the previous literature in showing that add-on orders significantly impact the workload of the clinical laboratory. The majority of add-on orders are clinical chemistry tests, and most add-on orders occur within 24 hours of original specimen collection. Robotic specimen archival/retrieval units can reduce manual effort in the clinical laboratory associated with add-on orders.

Summary of Activities supporting the Army Medicine 2020 (AM2020) Campaigns Injury and Violence Free Living Program, March 2013 July 2016

DTIC Science & Technology

2017-01-30

Program, March 2013–July 2016 PHR No. S.0023112 Approved for public release, distribution unlimited General Medicine: 500A Public Health...Angelia Cost , and Lee Hurt). Insights and efforts of OTSG Physical Performance Service Line leads (COL Chad Koenig, Dr. Joseph Molloy) enabled... public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions

From Not-So-Great to Worse: The Myth of Best Practice Methodologies

DTIC Science & Technology

2016-09-13

Collins’ arguments and suggested principled commonalities about great fi rms were unsupported. Resnick and Smunt conducted a fi nancial analysis over... market performance according to Collins’ measure, and that none do so when measured according to a metric based on modern portfolio theory. We...applying the fi ve principles to other fi rms or time periods will lead to anything other than average results.” By the way, Col- lins’ list of 11 great

Load Index Metrics for an Optimized Management of Web Services: A Systematic Evaluation

PubMed Central

Souza, Paulo S. L.; Santana, Regina H. C.; Santana, Marcos J.; Zaluska, Ed; Faical, Bruno S.; Estrella, Julio C.

2013-01-01

The lack of precision to predict service performance through load indices may lead to wrong decisions regarding the use of web services, compromising service performance and raising platform cost unnecessarily. This paper presents experimental studies to qualify the behaviour of load indices in the web service context. The experiments consider three services that generate controlled and significant server demands, four levels of workload for each service and six distinct execution scenarios. The evaluation considers three relevant perspectives: the capability for representing recent workloads, the capability for predicting near-future performance and finally stability. Eight different load indices were analysed, including the JMX Average Time index (proposed in this paper) specifically designed to address the limitations of the other indices. A systematic approach is applied to evaluate the different load indices, considering a multiple linear regression model based on the stepwise-AIC method. The results show that the load indices studied represent the workload to some extent; however, in contrast to expectations, most of them do not exhibit a coherent correlation with service performance and this can result in stability problems. The JMX Average Time index is an exception, showing a stable behaviour which is tightly-coupled to the service runtime for all executions. Load indices are used to predict the service runtime and therefore their inappropriate use can lead to decisions that will impact negatively on both service performance and execution cost. PMID:23874776

Speed, not magnitude, of knee extensor torque production is associated with self-reported knee function early after anterior cruciate ligament reconstruction.

PubMed

Hsieh, Chao-Jung; Indelicato, Peter A; Moser, Michael W; Vandenborne, Krista; Chmielewski, Terese L

2015-11-01

To examine the magnitude and speed of knee extensor torque production at the initiation of advanced anterior cruciate ligament (ACL) reconstruction rehabilitation and the associations with self-reported knee function. Twenty-eight subjects who were 12 weeks post-ACL reconstruction and 28 age- and sex-matched physically active controls participated in this study. Knee extensor torque was assessed bilaterally with an isokinetic dynamometer at 60°/s. The variables of interest were peak torque, average rate of torque development, time to peak torque and quadriceps symmetry index. Knee function was assessed with the International Knee Documentation Committee Subjective Knee Form (IKDC-SKF). Peak torque and average rate of torque development were lower on the surgical side compared to the non-surgical side and controls. Quadriceps symmetry index was lower in subjects with ACL reconstruction compared to controls. On the surgical side, average rate of torque development was positively correlated with IKDC-SKF score (r = 0.379) while time to peak torque was negatively correlated with IKDC-SKF score (r = -0.407). At the initiation of advanced ACL reconstruction rehabilitation, the surgical side displayed deficits in peak torque and average rate of torque development. A higher rate of torque development and shorter time to peak torque were associated with better self-reported knee function. The results suggest that the rate of torque development should be addressed during advanced ACL reconstruction rehabilitation and faster knee extensor torque generation may lead to better knee function. III.

Effect of Georgetown Lake on the water quality of Clear Creek, Georgetown, Colorado, 1997-98

USGS Publications Warehouse

Cuffin, Sally M.; Chafin, Daniel T.

2000-01-01

Georgetown Lake is a recreational reservoir located in the upper Clear Creek Basin, a designated Superfund site because of extensive metal mining in the past. Metals concentrations in Clear Creek increase as the stream receives runoff from mining-affected areas. In 1997, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, began a study to determine the effect of the reservoir on the transport of metals in Clear Creek. A bathymetric survey determined the capacity of the reservoir to be about 440 acre-feet of water, which remained constant during the study. Average water residence time in the reservoir is about 1?3 days during high flow. During low flow (10 cubic feet per second), average residence is about 22 days without ice cover and about 15 days with a 3-foot-thick ice cover. Sediment samples collected from the bottom of Georgetown Lake contained substantial concentrations of iron (average 25,500 milligrams per kilogram), aluminum (average 12,300 milligrams per kilogram), zinc (2,830 milligrams per kilogram), lead (618 milligrams per kilogram), manganese (548 milligrams per kilogram), and sulfide minerals (average 602 milligrams per kilogram as S). Sediment also contained abundant sulfate-reducing bacteria, indicating anoxic conditions. Algae and diatoms common to cold-water lakes were identified in sediment samples; one genus of algae is known to adapt to low-light conditions such as exist beneath ice cover. Vertical profiles of temperature, specific conductance, pH, and dissolved-oxygen concentrations were measured in the reservoir on July 28, 1997, when inflow to the reservoir was about 170 cubic feet per second and average residence time of water was about 1.3 days, and on February 13, 1998, when the reservoir was covered with about 3 feet of ice, inflow was about 15 cubic feet per second, and average residence time was about 12 days. The measurements on July 28, 1997, showed that the reservoir water was well mixed, although pH and dissolved oxygen concentrations were increased by photosynthesis near the bottom of the reservoir. Measurements on February 13, 1998, indicated thermal and chemical stratification with warmer water (about 4 degrees Celsius) beneath colder water and increases in pH and dissolved oxygen concentrations generally occurring near the top of the warmer layer. Concentrations of dissolved oxygen were saturated to oversaturated throughout the water column on both dates, although the concentrations were greater on February 13, 1998, because of colder temperature and photosynthesis. Median pH was about 0.5 unit higher on February 13, 1998, than on July 28, 1997, largely because the longer residence time on February 13, 1998, allowed greater cumulative effects of photosynthesis. Samples of inflow and outflow water were collected from August 1997 to August 1998. Dissolved cadmium and dissolved lead in inflow and outflow samples exceeded acute and chronic water-quality standards during some of the sampling period, whereas dissolved zinc exceeded both standards in inflow and outflow samples during the entire sampling period. Chromium, nickel, and silver were detected in a few samples at small concentrations. Arsenic, selenium, and thallium were not reported in any water samples. Georgetown Lake removes some metals from inflow water and releases others to outflow water. From August 1997 to August 1998, Georgetown Lake estimated outflow loads were about 21 percent less than the inflow load of cadmium and about 11 percent less than the inflow load of zinc. Estimated inflow loads were about 18 percent less than the outflow load of copper, about 13 percent less than the outflow load of iron, and about 27 percent less than the outflow load of manganese. Inflow and outflow loads of lead were essentially balanced. The outflow load of nitrite plus nitrate was about 14 percent less than the inflow load, probably because of plant uptake.

Time series inversion of spectra from ground-based radiometers

NASA Astrophysics Data System (ADS)

Christensen, O. M.; Eriksson, P.

2013-02-01

Retrieving time series of atmospheric constituents from ground-based spectrometers often requires different temporal averaging depending on the altitude region in focus. This can lead to several datasets existing for one instrument which complicates validation and comparisons between instruments. This paper puts forth a possible solution by incorporating the temporal domain into the maximum a posteriori (MAP) retrieval algorithm. The state vector is increased to include measurements spanning a time period, and the temporal correlations between the true atmospheric states are explicitly specified in the a priori uncertainty matrix. This allows the MAP method to effectively select the best temporal smoothing for each altitude, removing the need for several datasets to cover different altitudes. The method is compared to traditional averaging of spectra using a simulated retrieval of water vapour in the mesosphere. The simulations show that the method offers a significant advantage compared to the traditional method, extending the sensitivity an additional 10 km upwards without reducing the temporal resolution at lower altitudes. The method is also tested on the OSO water vapour microwave radiometer confirming the advantages found in the simulation. Additionally, it is shown how the method can interpolate data in time and provide diagnostic values to evaluate the interpolated data.

The Influence of Mesh Density on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Lyle, Karen H.; Spellman, Regina L.

2004-01-01

A study was performed to examine the influence of varying mesh density on an LS-DYNA simulation of a rectangular-shaped foam projectile impacting the space shuttle leading edge Panel 6. The shuttle leading-edge panels are fabricated of reinforced carbon-carbon (RCC) material. During the study, nine cases were executed with all possible combinations of coarse, baseline, and fine meshes of the foam and panel. For each simulation, the same material properties and impact conditions were specified and only the mesh density was varied. In the baseline model, the shell elements representing the RCC panel are approximately 0.2-in. on edge, whereas the foam elements are about 0.5-in. on edge. The element nominal edge-length for the baseline panel was halved to create a fine panel (0.1-in. edge length) mesh and doubled to create a coarse panel (0.4-in. edge length) mesh. In addition, the element nominal edge-length of the baseline foam projectile was halved (0.25-in. edge length) to create a fine foam mesh and doubled (1.0- in. edge length) to create a coarse foam mesh. The initial impact velocity of the foam was 775 ft/s. The simulations were executed in LS-DYNA version 960 for 6 ms of simulation time. Contour plots of resultant panel displacement and effective stress in the foam were compared at five discrete time intervals. Also, time-history responses of internal and kinetic energy of the panel, kinetic and hourglass energy of the foam, and resultant contact force were plotted to determine the influence of mesh density. As a final comparison, the model with a fine panel and fine foam mesh was executed with slightly different material properties for the RCC. For this model, the average degraded properties of the RCC were replaced with the maximum degraded properties. Similar comparisons of panel and foam responses were made for the average and maximum degraded models.

Engaging narratives evoke similar neural activity and lead to similar time perception.

PubMed

Cohen, Samantha S; Henin, Simon; Parra, Lucas C

2017-07-04

It is said that we lose track of time - that "time flies" - when we are engrossed in a story. How does engagement with the story cause this distorted perception of time, and what are its neural correlates? People commit both time and attentional resources to an engaging stimulus. For narrative videos, attentional engagement can be represented as the level of similarity between the electroencephalographic responses of different viewers. Here we show that this measure of neural engagement predicted the duration of time that viewers were willing to commit to narrative videos. Contrary to popular wisdom, engagement did not distort the average perception of time duration. Rather, more similar brain responses resulted in a more uniform perception of time across viewers. These findings suggest that by capturing the attention of an audience, narrative videos bring both neural processing and the subjective perception of time into synchrony.

Use of space-time models to investigate the stability of patterns of disease.

PubMed

Abellan, Juan Jose; Richardson, Sylvia; Best, Nicky

2008-08-01

The use of Bayesian hierarchical spatial models has become widespread in disease mapping and ecologic studies of health-environment associations. In this type of study, the data are typically aggregated over an extensive time period, thus neglecting the time dimension. The output of purely spatial disease mapping studies is therefore the average spatial pattern of risk over the period analyzed, but the results do not inform about, for example, whether a high average risk was sustained over time or changed over time. We investigated how including the time dimension in disease-mapping models strengthens the epidemiologic interpretation of the overall pattern of risk. We discuss a class of Bayesian hierarchical models that simultaneously characterize and estimate the stable spatial and temporal patterns as well as departures from these stable components. We show how useful rules for classifying areas as stable can be constructed based on the posterior distribution of the space-time interactions. We carry out a simulation study to investigate the sensitivity and specificity of the decision rules we propose, and we illustrate our approach in a case study of congenital anomalies in England. Our results confirm that extending hierarchical disease-mapping models to models that simultaneously consider space and time leads to a number of benefits in terms of interpretation and potential for detection of localized excesses.

The influence of incubation time on adenovirus quantitation in A549 cells by most probable number.

PubMed

Cashdollar, Jennifer L; Huff, Emma; Ryu, Hodon; Grimm, Ann C

2016-11-01

Cell culture based assays used to detect waterborne viruses typically call for incubating the sample for at least two weeks in order to ensure that all the culturable virus present is detected. Historically, this estimate was based, at least in part, on the length of time used for detecting poliovirus. In this study, we have examined A549 cells infected with human adenovirus type 2, and have found that a three week incubation of virus infected cells results in a higher number of detected viruses by quantal assay than what is seen after two weeks of incubation, with an average 955% increase in Most Probable Number (MPN) from 2 weeks to 3 weeks. This increase suggests that the extended incubation time is essential for accurately estimating viral titer, particularly for slow-growing viruses, UV treated samples, or samples with low titers of virus. In addition, we found that for some UV-treated samples, there was no detectable MPN at 2 weeks, but after 3 weeks, MPN values were obtained. For UV-treated samples, the average increase in MPN from 2 weeks to 3 weeks was 1401%, while untreated samples averaged a change in MPN of 674%, leading us to believe that the UV-damaged viral DNA may be able to be repaired such that viral replication then occurs. Published by Elsevier B.V.

Impact of Periodic Unsteadiness on Performance and Heat Load in Axial Flow Turbomachines

NASA Technical Reports Server (NTRS)

Sharma, Om P.; Stetson, Gary M.; Daniels, William A,; Greitzer, Edward M.; Blair, Michael F.; Dring, Robert P.

1997-01-01

Results of an analytical and experimental investigation, directed at the understanding of the impact of periodic unsteadiness on the time-averaged flows in axial flow turbomachines, are presented. Analysis of available experimental data, from a large-scale rotating rig (LSRR) (low speed rig), shows that in the time-averaged axisymmetric equations the magnitude of the terms representing the effect of periodic unsteadiness (deterministic stresses) are as large or larger than those due to random unsteadiness (turbulence). Numerical experiments, conducted to highlight physical mechanisms associated with the migration of combustor generated hot-streaks in turbine rotors, indicated that the effect can be simulated by accounting for deterministic stress like terms in the time-averaged mass and energy conservation equations. The experimental portion of this program shows that the aerodynamic loss for the second stator in a 1-1/2 stage turbine are influenced by the axial spacing between the second stator leading edge and the rotor trailing edge. However, the axial spacing has little impact on the heat transfer coefficient. These performance changes are believed to be associated with the change in deterministic stress at the inlet to the second stator. Data were also acquired to quantify the impact of indexing the first stator relative to the second stator. For the range of parameters examined, this effect was found to be of the same order as the effect of axial spacing.

Automated method for tracing leading and trailing processes of migrating neurons in confocal image sequences

NASA Astrophysics Data System (ADS)

Kerekes, Ryan A.; Gleason, Shaun S.; Trivedi, Niraj; Solecki, David J.

2010-03-01

Segmentation, tracking, and tracing of neurons in video imagery are important steps in many neuronal migration studies and can be inaccurate and time-consuming when performed manually. In this paper, we present an automated method for tracing the leading and trailing processes of migrating neurons in time-lapse image stacks acquired with a confocal fluorescence microscope. In our approach, we first locate and track the soma of the cell of interest by smoothing each frame and tracking the local maxima through the sequence. We then trace the leading process in each frame by starting at the center of the soma and stepping repeatedly in the most likely direction of the leading process. This direction is found at each step by examining second derivatives of fluorescent intensity along curves of constant radius around the current point. Tracing terminates after a fixed number of steps or when fluorescent intensity drops below a fixed threshold. We evolve the resulting trace to form an improved trace that more closely follows the approximate centerline of the leading process. We apply a similar algorithm to the trailing process of the cell by starting the trace in the opposite direction. We demonstrate our algorithm on two time-lapse confocal video sequences of migrating cerebellar granule neurons (CGNs). We show that the automated traces closely approximate ground truth traces to within 1 or 2 pixels on average. Additionally, we compute line intensity profiles of fluorescence along the automated traces and quantitatively demonstrate their similarity to manually generated profiles in terms of fluorescence peak locations.

Blood lead in the 21st Century: The sub-microgram challenge

PubMed Central

Amaya, Maria A; Jolly, Kevin W; Pingitore, Nicholas E

2010-01-01

In the US the dominant sources of lead through much of the 20th Century (eg, vehicular emissions, plumbing, household paint) have been significantly diminished. The reductions in adult and pediatric average blood lead levels in the US have been extraordinary. Progress continues: the US Environmental Protection Agency recently developed a new air standard for lead. In the 21st Century, the average blood lead level in a society may be seen as a marker of the status of their public’s health. However, the threat of lead exposure remains a significant public health problem among subpopulation groups in the US and in many less developed countries. This paper examines some of the specific issues involved in the reduction of blood lead in a post-industrial era. These involve the control of the remaining exogenous primary sources, both general (eg, industrial emissions) and specific (eg, at-risk occupations), exogenous secondary sources (eg, contaminated urban soils, legacy lead-based paints), an endogenous source (ie, cumulative body lead burden) and emergent sources. PMID:22282686

Modelling Fluctuations in the Concentration of Neutrally Buoyant Substances in the Atmosphere.

NASA Astrophysics Data System (ADS)

Ride, David John

1987-09-01

Available from UMI in association with The British Library. This thesis sets out to model the probability density function (pdf) of the perceived concentration of a contaminant in the atmosphere using simple, physical representations of the dispersing contaminant. Sensors of differing types perceive a given concentration field in different ways; the chosen pdf must be able to describe all possible perceptions of the same field. Herein, sensors are characterised by the time taken to achieve a reading and by a threshold level of concentration below which the sensor does not respond and thus records a concentration of zero. A literature survey of theoretical and experimental work concerning concentration fluctuations is conducted, and the merits--or otherwise--of some standard pdfs in common use are discussed. The ways in which the central moments, the peak-to-mean ratio, the intermittency and the autocorrelation function behave under various combinations of threshold levels and time averaging are investigated. An original experiment designed to test the suitability of time averaging as a valid simulation of both sensor response times and sampling volumes is reported. The results suggest that, for practical purposes, smoothing from combined volume/time characteristics of a sensor can be modelled by time averaging the output of a more responsive sensor. A possible non -linear volume/time effect was observed at very high temporal resolutions. Intermittency is shown to be an important parameter of the concentration field. A geometric model for describing and explaining the intermittency of a meandering plume of material in terms of the ratio of the plume width to the amplitude of meander and the within-plume intermittency is developed and validated. It shows that the model cross plume profiles of intermittency cannot, in general, be represented by simple functional forms. A new physical model for the fluctuations in concentration from a dispersing contaminant is described which leads to the adoption of a truncated Gaussian (or 'clipped normal') pdf for time averaged concentrations. A series of experiments is described which was designed to test the aptness of this distribution and display changes in the perception of the parameters of the concentration field wrought by various combinations of thresholding and time averaging. The truncated Gaussian pdf is shown to be more suitable for describing fluctuations than the log-normal and negative exponential pdfs, and to possess a better physical basis than either of them. The combination of thresholding and time averaging on the output of a sensor is shown to produce complex results which could affect profoundly the assessment of the potential hazard presented by a toxic, flammable or explosive plume or cloud.

Can a combination of average of normals and "real time" External Quality Assurance replace Internal Quality Control?

PubMed

Badrick, Tony; Graham, Peter

2018-03-28

Internal Quality Control and External Quality Assurance are separate but related processes that have developed independently in laboratory medicine over many years. They have different sample frequencies, statistical interpretations and immediacy. Both processes have evolved absorbing new understandings of the concept of laboratory error, sample material matrix and assay capability. However, we do not believe at the coalface that either process has led to much improvement in patient outcomes recently. It is the increasing reliability and automation of analytical platforms along with improved stability of reagents that has reduced systematic and random error, which in turn has minimised the risk of running less frequent IQC. We suggest that it is time to rethink the role of both these processes and unite them into a single approach using an Average of Normals model supported by more frequent External Quality Assurance samples. This new paradigm may lead to less confusion for laboratory staff and quicker responses to and identification of out of control situations.

Laser-supported diaphanoscopy: an innovative technique for locating gastric stromal tumors in gastroscopic-laparoscopic rendezvous: a case series.

PubMed

Patrzyk, M; Schreiber, A; Heidecke, C D; Glitsch, A

2009-12-01

Development of an innovative method of endoscopic laser-supported diaphanoscopy, for precise demonstration of the location of gastrointestinal stromal tumors (GISTs) at laparoscopy is described. The equipment consists of a light transmission cable with an anchoring system for the gastric mucosa, a connecting system for the light source, and the laser light source itself. During surgery, transillumination by laser is used to show the shape of the tumor. The resection margins are then marked by electric coagulation. Ten patients have been successfully treated using this technique in laparoscopic-endoscopic rendezvous procedures. Average time of surgery was 123 minutes. The time for marking the shape of the tumor averaged 16 minutes. Depending on tumor location and size, 4-7 marks were used, and resection margins were 4-15 mm. This new and effective technique facilitates precise locating of gastric GISTs leading to exact and tissue-sparing transmural laparoscopic resections. Georg Thieme Verlag KG Stuttgart New York.

Diode laser sensor to monitor HCL in a plasma etch reactor

NASA Astrophysics Data System (ADS)

Kim, Suhong; Klimecky, Pete; Chou, Shang-I.; Jeffries, Jay B.; Terry, Fred L., Jr.; Hanson, Ronald K.

2002-09-01

Absorption measurements of HCl during plasma etching of poly-silicon are made using the P(4) transition in the first vibrational overtone band near 1.79 μm. Single path absorption provides a real-time HCl monitor during etching of six-inch wafers in a commercial Lam Research 9400SE reactor at the University of Michigan. Wavelength modulation at 10.7 MHz is used to distinguish the absorption signal from the strong plasma emission. The laser center frequency is ramp-tuned at 500 Hz providing an HCl measurement every 2ms. Direct absorption measurements without the plasma are used to calibrate the wavelength modulation signal. The minimum detectable absorbance was 5x(10)-6 with 50 ms averaging, leading to an HCl detection limit of ~(10)12cm-3. For a given ratio of the feedstock HBr/Cl2, the measured HCl concentration tracks the average etch rate. These measurements demonstrate the feasibility of a real-time diode laser-based etch rate sensor.

The effects of publishing emergency department wait time on patient utilization patterns in a community with two emergency department sites: a retrospective, quasi-experiment design.

PubMed

Xie, Bin; Youash, Sabrina

2011-06-14

Providing emergency department (ED) wait time information to the public has been suggested as a mechanism to reduce lengthy ED wait times (by enabling patients to select the ED site with shorter wait time), but the effects of such a program have not been evaluated. We evaluated the effects of such a program in a community with two ED sites. Descriptive statistics for wait times of the two sites before and after the publication of wait time information were used to evaluate the effects of the publication of wait time information on wait times. Multivariate logistical regression was used to test whether or not individual patients used published wait time to decide which site to visit. We found that the rates of wait times exceeding 4 h, and the 95th percentile of wait times in the two sites decreased after the publication of wait time information, even though the average wait times experienced a slight increase. We also found that after controlling for other factors, the site with shorter wait time had a higher likelihood of being selected after the publication of wait time information, but there was no such relationship before the publication. These findings were consistent with the hypothesis that the publication of wait time information leads to patients selecting the site with shorter wait time. While publishing ED wait time information did not improve average wait time, it reduced the rates of lengthy wait times.

Measuring and Validating Neutron Capture Cross Sections Using a Lead Slowing-Down Spectrometer

NASA Astrophysics Data System (ADS)

Thompson, Nicholas

Accurate nuclear data is essential for the modeling, design, and operation of nuclear systems. In this work, the Rensselaer Polytechnic Institute (RPI) Lead Slowing-Down Spectrometer (LSDS) at the Gaerttner Linear Accelerator Center (LINAC) was used to measure neutron capture cross sections and validate capture cross sections in cross section libraries. The RPI LINAC was used to create a fast burst of neutrons in the center of the LSDS, a large cube of high purity lead. A sample and YAP:Ce scintillator were placed in the LSDS, and as neutrons lost energy through scattering interactions with the lead, the scintillator detected capture gammas resulting from neutron capture events in the sample. Samples of silver, gold, cobalt, iron, indium, molybdenum, niobium, nickel, tin, tantalum, and zirconium were measured. Data was collected as a function of time after neutron pulse, or slowing-down time, which is correlated to average neutron energy. An analog and a digital data acquisition system collected data simultaneously, allowing for collection of pulse shape information as well as timing. Collection of digital data allowed for pulse shape analysis after the experiment. This data was then analyzed and compared to Monte Carlo simulations to validate the accuracy of neutron capture cross section libraries. These measurements represent the first time that neutron capture cross sections have been measured using an LSDS in the United States, and the first time tools such as coincidence measurements and pulse height weighting have been applied to measurements of neutron capture cross sections using an LSDS. Significant differences between measurement results and simulation results were found in multiple materials, and some errors in nuclear data libraries have already been identified due to these measurements.

Anomalous dispersion in correlated porous media: a coupled continuous time random walk approach

NASA Astrophysics Data System (ADS)

Comolli, Alessandro; Dentz, Marco

2017-09-01

We study the causes of anomalous dispersion in Darcy-scale porous media characterized by spatially heterogeneous hydraulic properties. Spatial variability in hydraulic conductivity leads to spatial variability in the flow properties through Darcy's law and thus impacts on solute and particle transport. We consider purely advective transport in heterogeneity scenarios characterized by broad distributions of heterogeneity length scales and point values. Particle transport is characterized in terms of the stochastic properties of equidistantly sampled Lagrangian velocities, which are determined by the flow and conductivity statistics. The persistence length scales of flow and transport velocities are imprinted in the spatial disorder and reflect the distribution of heterogeneity length scales. Particle transitions over the velocity length scales are kinematically coupled with the transition time through velocity. We show that the average particle motion follows a coupled continuous time random walk (CTRW), which is fully parameterized by the distribution of flow velocities and the medium geometry in terms of the heterogeneity length scales. The coupled CTRW provides a systematic framework for the investigation of the origins of anomalous dispersion in terms of heterogeneity correlation and the distribution of conductivity point values. We derive analytical expressions for the asymptotic scaling of the moments of the spatial particle distribution and first arrival time distribution (FATD), and perform numerical particle tracking simulations of the coupled CTRW to capture the full average transport behavior. Broad distributions of heterogeneity point values and lengths scales may lead to very similar dispersion behaviors in terms of the spatial variance. Their mechanisms, however are very different, which manifests in the distributions of particle positions and arrival times, which plays a central role for the prediction of the fate of dissolved substances in heterogeneous natural and engineered porous materials. Contribution to the Topical Issue "Continuous Time Random Walk Still Trendy: Fifty-year History, Current State and Outlook", edited by Ryszard Kutner and Jaume Masoliver.

Unified halo-independent formalism from convex hulls for direct dark matter searches

NASA Astrophysics Data System (ADS)

Gelmini, Graciela B.; Huh, Ji-Haeng; Witte, Samuel J.

2017-12-01

Using the Fenchel-Eggleston theorem for convex hulls (an extension of the Caratheodory theorem), we prove that any likelihood can be maximized by either a dark matter 1- speed distribution F(v) in Earth's frame or 2- Galactic velocity distribution fgal(vec u), consisting of a sum of delta functions. The former case applies only to time-averaged rate measurements and the maximum number of delta functions is (Script N‑1), where Script N is the total number of data entries. The second case applies to any harmonic expansion coefficient of the time-dependent rate and the maximum number of terms is Script N. Using time-averaged rates, the aforementioned form of F(v) results in a piecewise constant unmodulated halo function tilde eta0BF(vmin) (which is an integral of the speed distribution) with at most (Script N-1) downward steps. The authors had previously proven this result for likelihoods comprised of at least one extended likelihood, and found the best-fit halo function to be unique. This uniqueness, however, cannot be guaranteed in the more general analysis applied to arbitrary likelihoods. Thus we introduce a method for determining whether there exists a unique best-fit halo function, and provide a procedure for constructing either a pointwise confidence band, if the best-fit halo function is unique, or a degeneracy band, if it is not. Using measurements of modulation amplitudes, the aforementioned form of fgal(vec u), which is a sum of Galactic streams, yields a periodic time-dependent halo function tilde etaBF(vmin, t) which at any fixed time is a piecewise constant function of vmin with at most Script N downward steps. In this case, we explain how to construct pointwise confidence and degeneracy bands from the time-averaged halo function. Finally, we show that requiring an isotropic Galactic velocity distribution leads to a Galactic speed distribution F(u) that is once again a sum of delta functions, and produces a time-dependent tilde etaBF(vmin, t) function (and a time-averaged tilde eta0BF(vmin)) that is piecewise linear, differing significantly from best-fit halo functions obtained without the assumption of isotropy.

Continuous and Pulsatile Pediatric Ventricular Assist Device Hemodynamics with a Viscoelastic Blood Model

PubMed Central

Good, Bryan C.; Deutsch, Steven; Manning, Keefe B.

2015-01-01

Purpose To investigate the effects of pulsatile and continuous pediatric ventricular assist (PVAD) flow and pediatric blood viscoelasticity on hemodynamics in a pediatric aortic graft model. Methods Hemodynamic parameters of pulsatility, along with velocity and wall shear stress (WSS), are analyzed and compared between Newtonian and viscoelastic blood models at a range of physiological pediatric hematocrits using computational fluid dynamics. Results Both pulsatile and continuous PVAD flow lead to a decrease in pulsatility (surplus hemodynamic energy (SHE), ergs/cm3) compared to healthy aortic flow but with continuous PVAD pulsatility up to 2.4 times lower than pulsatile PVAD pulsatility at each aortic outlet. Significant differences are also seen between the two flow modes in velocity and WSS. The higher velocity jet during systole with pulsatile flow leads to higher WSSs at the anastomotic toe and at the aortic branch bifurcations. The lower velocity but continuous flow jet leads to a much different flow field and higher WSSs into diastole. Under a range of physiological pediatric hematocrit (20-60%), both velocity and WSS can vary significantly with the higher hematocrit blood model generally leading to higher peak WSSs but also lower WSSs in regions of flow separation. Conclusions The large decrease in pulsatility seen from continuous PVAD flow could lead to complications in pediatric vascular development while the high WSSs during peak systole from pulsatile PVAD flow could lead to blood damage. Both flow modes lead to similar regions prone to intimal hyperplasia (IH) resulting from low time-averaged WSS (TAWSS) and high oscillatory shear index (OSI). PMID:26643646

Computation of two-dimensional flows past ram-air parachutes

NASA Astrophysics Data System (ADS)

Mittal, S.; Saxena, P.; Singh, A.

2001-03-01

Computational results for flow past a two-dimensional model of a ram-air parachute with leading edge cut are presented. Both laminar (Re=104) and turbulent (Re=106) flows are computed. A well-proven stabilized finite element method (FEM), which has been applied to various flow problems earlier, is utilized to solve the incompressible Navier-Stokes equations in the primitive variables formulation. The Baldwin-Lomax model is employed for turbulence closure. Turbulent flow computations past a Clarck-Y airfoil without a leading edge cut, for =7.5°, result in an attached flow. The leading edge cut causes the flow to become unsteady and leads to a significant loss in lift and an increase in drag. The flow inside the parafoil cell remains almost stagnant, resulting in a high value of pressure, which is responsible for giving the parafoil its shape. The value of the lift-to-drag ratio obtained with the present computations is in good agreement with those reported in the literature. The effect of the size and location of the leading edge cut is studied. It is found that the flow on the upper surface of the parafoil is fairly insensitive to the configuration of the cut. However, the flow quality on the lower surface improves as the leading edge cut becomes smaller. The lift-to-drag ratio for various configurations of the leading edge cut varies between 3.4 and 5.8. It is observed that even though the time histories of the aerodynamic coefficients from the laminar and turbulent flow computations are quite different, their time-averaged values are quite similar. Copyright

Correcting for day of the week and public holiday effects: improving a national daily syndromic surveillance service for detecting public health threats.

PubMed

Buckingham-Jeffery, Elizabeth; Morbey, Roger; House, Thomas; Elliot, Alex J; Harcourt, Sally; Smith, Gillian E

2017-05-19

As service provision and patient behaviour varies by day, healthcare data used for public health surveillance can exhibit large day of the week effects. These regular effects are further complicated by the impact of public holidays. Real-time syndromic surveillance requires the daily analysis of a range of healthcare data sources, including family doctor consultations (called general practitioners, or GPs, in the UK). Failure to adjust for such reporting biases during analysis of syndromic GP surveillance data could lead to misinterpretations including false alarms or delays in the detection of outbreaks. The simplest smoothing method to remove a day of the week effect from daily time series data is a 7-day moving average. Public Health England developed the working day moving average in an attempt also to remove public holiday effects from daily GP data. However, neither of these methods adequately account for the combination of day of the week and public holiday effects. The extended working day moving average was developed. This is a further data-driven method for adding a smooth trend curve to a time series graph of daily healthcare data, that aims to take both public holiday and day of the week effects into account. It is based on the assumption that the number of people seeking healthcare services is a combination of illness levels/severity and the ability or desire of patients to seek healthcare each day. The extended working day moving average was compared to the seven-day and working day moving averages through application to data from two syndromic indicators from the GP in-hours syndromic surveillance system managed by Public Health England. The extended working day moving average successfully smoothed the syndromic healthcare data by taking into account the combined day of the week and public holiday effects. In comparison, the seven-day and working day moving averages were unable to account for all these effects, which led to misleading smoothing curves. The results from this study make it possible to identify trends and unusual activity in syndromic surveillance data from GP services in real-time independently of the effects caused by day of the week and public holidays, thereby improving the public health action resulting from the analysis of these data.

The Influence Of Antecedent Conditions On Flood Risk In Sub-Saharan Africa

NASA Astrophysics Data System (ADS)

Bischiniotis, K.

2017-12-01

Flood risk management has traditionally focused on long-term flood protection measures. However, due to high investment costs many lower-income countries are not able to afford hard infrastructure that provides the desired safety levels. Consequently, timely warning of not only extreme events is crucial in risk mitigation at these places. Most flood warning systems have predominantly focused on precipitation as the main predictive factor with lead times of hours or days. Nevertheless, other factors such as anomalous positive water storage, soil saturation and evapotranspiration also affect the flood build-up period. Gaining insights in the processes occurring during this period can increase warning lead times, resulting in more effective preparation. This study follows a pragmatic approach to analyse the hydro-meteorological pre-conditions of 501 damaging floods over the period 1980 to 2010 in sub-Saharan Africa. These are separated into a) weather scale (0-7 days) and b) seasonal scale conditions (up to 6 months) before each event in a way that the two periods do not overlap. The 7-day preceding precipitation (PRE7) and the Standardized Precipitation Evapotranspiration Index (SPEI) reflect the conditions in the two time scale domains, respectively. Using the flood onset date and the location derived from NatCatSERVICE database, the antecedent conditions of each flood are systematically compared to the same conditions during the other years of the dataset, during which no floods were reported. Results indicate that high PRE7 does not always justify the flood generation by itself since there were several cases where similar magnitude precipitation events did not lead to flooding. The SPEI in the end of the flood onset month seems to be a good flood monitoring tool as in most cases it well reflects the wet conditions (80% of the floods). The SPEIs of different averaging times prior to flood events also show that many floods were preceded by wet conditions (70% , 65%, and 57% for averaging time of 1, 3 and 6 months, respectively. Finally, we show that bringing together weather and seasonal-scale conditions can result in an increased flooding likelihood, which in turn might help humanitarian organizations and decision-makers extend the period of the preventive flood risk management planning.

Expansion and growth of structure observables in a macroscopic gravity averaged universe

NASA Astrophysics Data System (ADS)

Wijenayake, Tharake; Ishak, Mustapha

2015-03-01

We investigate the effect of averaging inhomogeneities on expansion and large-scale structure growth observables using the exact and covariant framework of macroscopic gravity (MG). It is well known that applying the Einstein's equations and spatial averaging do not commute and lead to the averaging problem and backreaction terms. For the MG formalism applied to the Friedman-Lemaitre-Robertson-Walker (FLRW) metric, the extra term can be encapsulated as an averaging density parameter denoted ΩA . An exact isotropic cosmological solution of MG for the flat FLRW metric is already known in the literature; we derive here an anisotropic exact solution. Using the isotropic solution, we compare the expansion history to current available data of distances to supernovae, baryon acoustic oscillations, cosmic microwave background last scattering surface data, and Hubble constant measurements, and find -0.05 ≤ΩA≤0.07 (at the 95% confidence level). For the flat metric case this reduces to -0.03 ≤ΩA≤0.05 . The positive part of the intervals can be rejected if a mathematical (and physical) prior is taken into account. We also find that the inclusion of this term in the fits can shift the values of the usual cosmological parameters by a few to several percents. Next, we derive an equation for the growth rate of large-scale structure in MG that includes a term due to the averaging and assess its effect on the evolution of the growth compared to that of the Lambda cold dark matter (Λ CDM ) concordance model. We find that an ΩA term of an amplitude range of [-0.04 ,-0.02 ] lead to a relative deviation of the growth from that of the Λ CDM of up to 2%-4% at late times. Thus, the shift in the growth could be of comparable amplitude to that caused by similar changes in cosmological parameters like the dark energy density parameter or its equation of state. The effect could also be comparable in amplitude to some systematic effects considered for future surveys. This indicates that the averaging term and its possible effect need to be tightly constrained in future precision cosmological studies.

When left-hemisphere reading is compromised: Comparing reading ability in participants after left cerebral hemispherectomy and participants with developmental dyslexia.

PubMed

Katzir, Tami; Christodoulou, Joanna A; de Bode, Stella

2016-10-01

We investigated reading skills in individuals who have undergone left cerebral hemispherectomy and in readers with developmental dyslexia to understand diverse characteristics contributing to reading difficulty. Although dyslexia is a developmental disorder, left hemispherectomy requires that patients (re)establish the language process needed to perform the language-based tasks in the nondominant (right) hemisphere to become readers. Participants with developmental dyslexia (DD; n = 11) and participants who had undergone left hemispherectomy (HEMI; n = 11) were matched on age and gender, and were compared on timed and untimed measures of single word and pseudo-word reading. The hemispherectomy group was subdivided into prenatal (in utero) and postnatal (>3 years) insult groups, indicating the timing of the primary lesion that ultimately required surgical intervention. On an untimed reading measure, the readers with DD were comparable to individuals who had undergone left hemispherectomy due to prenatal insult, but both scored higher than the postnatal hemispherectomy group. Timed word reading differed across groups. The hemispherectomy prenatal subgroup had low average scores on both timed and untimed tests. The group with dyslexia had average scores on untimed measures and below average scores on timed reading. The hemispherectomy postnatal group had the lowest scores among the groups by a significant margin, and the most pronounced reading difficulty. Patients with prenatal lesions leading to an isolated right hemisphere (RH) have the potential to develop reading to a degree comparable to that in persons with dyslexia for single word reading. This potential sharply diminishes in individuals who undergo hemispherectomy due to postnatal insult. The higher scores of the prenatal hemispherectomy group on timed reading suggest that under these conditions, individuals with an isolated RH can compensate to a significant degree. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

On measurement noise in the European TWSTFT network.

PubMed

Piester, Dirk; Bauch, Andreas; Becker, Jürgen; Staliuniene, Egle; Schlunegger, Christian

2008-09-01

Two-way satellite time and frequency transfer (TWSTFT) using geostationary telecommunication satellites is widely used in the timing community today and has also been chosen as the primary means to effect synchronization of elements of the ground segment of the European satellite navigation system Galileo. We investigated the link performance in a multistation network based on operational parameters such as the number of simultaneously transmitting stations, transmit and receive power, and chip rates of the pseudorandom noise modulation of the transmitted signals. Our work revealed that TWSTFT through a "quiet" transponder channel (2 stations transmitting only) leads to a measurement noise, expressed by the 1 pps jitter, reduced by a factor of 1.4 compared with a busy transponder carrying signals of 12 stations. The frequency transfer capability expressed by the Allan deviation is reduced at short averaging times by the same amount. At averaging times of >1 d, no such reduction could be observed, which points to the fact that other noise sources dominate at such averaging times. We also found that higher transmit power increases the carrier-to-noise density ratio at the receive station and thus entails lower jitter but causes interference with other station's signals. In addition, the use of lower chip rates, which could be accommodated by a reduced assigned bandwidth on the satellite transponder, is not recommended. The 1 pps jitter would go up by a factor of 2.5 when going from 2.5 MCh/s to 1 MCh/s. The 2 Galileo precise timing facilities (PTFs) can be included in the currently operated network of 12 stations in Europe and all requirements on the TWSTFT performance can be met, provided that suitable ground equipment will be installed in the Galileo ground segment.

40 CFR 421.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... produced Lead .000 .000 Zinc .000 .000 (g) Subpart G—Hard Lead Refining Slag Granulation. BAT Effluent... per billion pounds) of hard lead produced Lead .000 .000 Zinc .000 .000 (h) Subpart G—Hard Lead... any 1 day Maximum for monthly average mg/kkg (pounds per billion pounds) of hard lead produced Lead...

40 CFR 421.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... produced Lead .000 .000 Zinc .000 .000 (g) Subpart G—Hard Lead Refining Slag Granulation. BAT Effluent... per billion pounds) of hard lead produced Lead .000 .000 Zinc .000 .000 (h) Subpart G—Hard Lead... any 1 day Maximum for monthly average mg/kkg (pounds per billion pounds) of hard lead produced Lead...

A new method to evaluate the biocontrol potential of single spore isolates of fungal entomopathogens

PubMed Central

Posada, Francisco J.; Vega, Fernando E.

2005-01-01

Fifty Beauveria bassiana (Balsamo) Vuillemin (Ascomycota: Hypocreales) strains isolated from the coffee berry borer were used to develop a novel screening method aimed at selecting strains with the highest biocontrol potential. The screening method is based on percent insect mortality, average survival time, mortality distribution, percent spore germination, fungal life cycle duration, and spore production on the insect. Based on these parameters, only 11 strains merited further study. The use of a sound scientific protocol for the selection of promising fungal entomopathogens should lead to more efficient use of time, labor, and financial resources in biological control programs. PMID:17119619

Scheduling periodic jobs using imprecise results

NASA Technical Reports Server (NTRS)

Chung, Jen-Yao; Liu, Jane W. S.; Lin, Kwei-Jay

1987-01-01

One approach to avoid timing faults in hard, real-time systems is to make available intermediate, imprecise results produced by real-time processes. When a result of the desired quality cannot be produced in time, an imprecise result of acceptable quality produced before the deadline can be used. The problem of scheduling periodic jobs to meet deadlines on a system that provides the necessary programming language primitives and run-time support for processes to return imprecise results is discussed. Since the scheduler may choose to terminate a task before it is completed, causing it to produce an acceptable but imprecise result, the amount of processor time assigned to any task in a valid schedule can be less than the amount of time required to complete the task. A meaningful formulation of the scheduling problem must take into account the overall quality of the results. Depending on the different types of undesirable effects caused by errors, jobs are classified as type N or type C. For type N jobs, the effects of errors in results produced in different periods are not cumulative. A reasonable performance measure is the average error over all jobs. Three heuristic algorithms that lead to feasible schedules with small average errors are described. For type C jobs, the undesirable effects of errors produced in different periods are cumulative. Schedulability criteria of type C jobs are discussed.

Heavy metals in soil at a waste electrical and electronic equipment processing area in China.

PubMed

Gu, Weihua; Bai, Jianfeng; Yao, Haiyan; Zhao, Jing; Zhuang, Xuning; Huang, Qing; Zhang, Chenglong; Wang, JingWei

2017-11-01

For the objective of evaluating the contamination degree of heavy metals and analysing its variation trend in soil at a waste electrical and electronic equipment processing area in Shanghai, China, evaluation methods, which include single factor index method, geo-accumulation index method, comprehensive pollution index method, and potential ecological risk index method, were adopted in this study. The results revealed that the soil at a waste electrical and electronic equipment processing area was polluted by arsenic, cadmium, copper, lead, zinc, and chromium. It also demonstrated that the concentrations of heavy metals were increased over time. Exceptionally, the average value of the metalloid (arsenic) was 73.31 mg kg -1 in 2014, while it was 58.31 mg kg -1 in the first half of 2015, and it was 2.93 times and 2.33 times higher than that of the Chinese Environmental Quality Standard for Soil in 2014 and the first half of 2015, respectively. The sequences of the contamination degree of heavy metals in 2014 and the first half of 2015 were cadmium > lead > copper > chromium > zinc and cadmium > lead > chromium > zinc > copper. From the analysis of the potential ecological risk index method, arsenic and cadmium had higher ecological risk than other heavy metals. The integrated ecological risk index of heavy metals (cadmium, copper, lead, zinc, and chromium) and metalloid (arsenic) was 394.10 in 2014, while it was 656.16 in the first half of 2015, thus documenting a strong ecological risk.

Quantum Mechanical Calculations of Free Energy and Open-Circuit Voltage in Lattice Modeled Organic Photovoltaic Devices

NASA Astrophysics Data System (ADS)

Lankevich, Vladimir; Bittner, Eric

In organic photovoltaic devices (OPVs), initially bound electron and hole can take many different paths to dissociate and become free charge carriers. This leads to the increase in their density of states and therefore increase in the entropy of the system. Accurate description of the energy barriers that charges have to overcome, therefore requires calculation of the free energy. Free energy of an OPV is directly related to its open-circuit voltage and depends only on few important parameters such as average life-time of a charge-transfer state, average energy of the charge-transfer state and energetic disorder in the system. We extend these ideas to the quantum mechanical simulations of the dissociation in the lattice modeled bulk-heterojunction system. We observe average excitonic and free energies that agree with theoretical predictions and the number of experimental results from previous studies. We study effects of the energy disorder and importance of the dimensionality and morphology in materials such as polymer-fullerene blends.

Angular-contact ball-bearing internal load estimation algorithm using runtime adaptive relaxation

NASA Astrophysics Data System (ADS)

Medina, H.; Mutu, R.

2017-07-01

An algorithm to estimate internal loads for single-row angular contact ball bearings due to externally applied thrust loads and high-operating speeds is presented. A new runtime adaptive relaxation procedure and blending function is proposed which ensures algorithm stability whilst also reducing the number of iterations needed to reach convergence, leading to an average reduction in computation time in excess of approximately 80%. The model is validated based on a 218 angular contact bearing and shows excellent agreement compared to published results.

Cosmic rays and other rpace phenomena influenced on the Earth's climate

NASA Astrophysics Data System (ADS)

Lev, Dorman

2016-07-01

We consider effects of cosmic rays (CR) and some other space phenomena on the Earth's climate change. It is well known that the system of internal and external factors formatting the Earth's climate is very unstable: decreasing of planetary average annual temperature leads to an increase of planetary snow surface, and decreasing of the total annual solar energy input into the system decreases the planetary temperature even more. And inverse: increasing planetary temperature leads to an decrease of snow surface, and increasing of the total solar energy input into the system increases the planetary temperature even more. From this follows that even energetically small factors acted long time in one direction may have a big influence on climate change. In our opinion, the most important of these factors are CR (mostly through its influence on planetary cloudiness) and space dust (SD) through their influence on the flux of solar irradiation and on formation of clouds (these actions are in one direction). It is important that CR and SD influenced on global climate change in the same direction. Increasing of CR planetary intensity leads to increasing of formation clouds (especially low clouds on altitudes smaller than 3 km), increasing annual average of raining and decreasing of annual average planetary temperature. Increasing of SD decreases of solar irradiation and increases cloudiness what leads also to decreasing of annual average planetary temperature. Moreover, interactions of CR particles with dust granules decreases their dimensions what increased effectiveness of their actions on clouds. We consider data great variations of planetary temperature much before the beginning of the Earth's technological civilization (mostly caused by moving of the solar system around our Galaxy centre and collisions with molecular-dust clouds). We consider in details not only situation during the last hundred years, but also situation in the last one thousand years (and especially situation during Maunder minimum of solar activity), during many thousand and many millions years. It is shown that very big changes in climate were caused also by some rarely phenomena as impacts of asteroids and nearby supernova explosions with great influence on biosphere. We discuss also the problem on forecasting of global climate change what is especially important for saving present civilization from great climate catastrophes.

The balance between adaptation to catalysts and competition radius shapes the total wealth, time variability and inequality

NASA Astrophysics Data System (ADS)

Davidovich, Hadar; Louzoun, Yoram

2013-05-01

The globalization of modern markets has led to the emergence of competition between producers in ever growing distances. This opens the interesting question in population dynamics of the effect of long-range competition. We here study a model of non-local competition to test the effect of the competition radius on the wealth distribution, using the framework of a stochastic birth-death process, with non-local interactions. We show that this model leads to non-trivial dynamics that can have implications in other domains of physics. Competition is studied in the context of the catalyst induced growth of autocatalytic agents, representing the growth of capital in the presence of investment opportunities. These agents are competing with all other agents in a given radius on growth possibilities. We show that a large scale competition leads to an extreme localization of the agents, where typically a single aggregate of agents can survive within a given competition radius. The survival of these aggregates is determined by the diffusion rates of the agents and the catalysts. For high and low agent diffusion rates, the agent population is always annihilated, while for intermediate diffusion rates, a finite agent population persists. Increasing the catalyst diffusion rate always leads to a decrease in the average agent population density. The extreme localization of the agents leads to the emergence of intermittent fluctuations, when a large aggregate of agents disappear. As the competition radius increases, so does the average agent density and its spatial variance as well as the volatility.

Relevant Anatomy, Morphology, and Implantation Techniques of the Dorsal Root Ganglia at the Lumbar Levels.

PubMed

Vancamp, Tim; Levy, Robert M; Peña, Isaac; Pajuelo, Antonio

2017-10-01

While dorsal root ganglion (DRG) stimulation has been available in Europe and Australia for the past five years and in the United States for the past year, there are no published details concerning the optimal procedures for DRG lead implantation. We describe several techniques that can be applied to implant cylindrical leads over the DRG, highlighting some tips and tricks according to our experiences. Focus is mainly shifted toward implantations in the lumbar area. We furthermore give some insights in the results we experienced in Spain as well as some worldwide numbers. A 14-gauge needle is placed using a "2-Level Technique (2-LT)" or exceptionally a "1-Level Technique (1-LT)" or a "Primary- or Secondary Technique" at the level of L5. The delivery sheath, loaded with the lead, is advanced toward the targeted neural foramen. The lead is placed over the dorsal aspect of the DRG. A strain relief loop is created in the epidural space. Sheath and needle are retracted and the lead is secured using an anchor or anchorless technique. In Spain, 87.2% (N = 78) of the selected patients have been successfully implanted. Seven (8.9%) had a negative trial and three (4.2%) were explanted. Average VAS score decreased from 8.8 to 3.3 and on average 94.5% of the pain area was covered. In our center's subjects (N = 47 patients, 60.3% of all implanted patients in Spain), VAS scores decreased from an average of 8.8-1.7 and pain coverage averaged 96.4%. We used an average of 1.8 electrodes. Worldwide more than 4000 permanent cases have been successfully performed. We present implantation techniques whereby a percutaneous lead is placed over the DRG through the use of a special designed delivery sheath. Further investigation of the safety, efficacy, and sustainability of clinical outcomes using these devices is warranted. © 2017 International Neuromodulation Society.

Edgeworth expansions of stochastic trading time

NASA Astrophysics Data System (ADS)

Decamps, Marc; De Schepper, Ann

2010-08-01

Under most local and stochastic volatility models the underlying forward is assumed to be a positive function of a time-changed Brownian motion. It relates nicely the implied volatility smile to the so-called activity rate in the market. Following Young and DeWitt-Morette (1986) [8], we propose to apply the Duru-Kleinert process-cum-time transformation in path integral to formulate the transition density of the forward. The method leads to asymptotic expansions of the transition density around a Gaussian kernel corresponding to the average activity in the market conditional on the forward value. The approximation is numerically illustrated for pricing vanilla options under the CEV model and the popular normal SABR model. The asymptotics can also be used for Monte Carlo simulations or backward integration schemes.

Reliability, return periods, and risk under nonstationarity

NASA Astrophysics Data System (ADS)

Read, Laura K.; Vogel, Richard M.

2015-08-01

Water resources design has widely used the average return period as a concept to inform management and communication of the risk of experiencing an exceedance event within a planning horizon. Even though nonstationarity is often apparent, in practice hydrologic design often mistakenly assumes that the probability of exceedance, p, is constant from year to year which leads to an average return period To equal to 1/p; this expression is far more complex under nonstationarity. Even for stationary processes, the common application of an average return period is problematic: it does not account for planning horizon, is an average value that may not be representative of the time to the next flood, and is generally not applied in other areas of water planning. We combine existing theoretical and empirical results from the literature to provide the first general, comprehensive description of the probabilistic behavior of the return period and reliability under nonstationarity. We show that under nonstationarity, the underlying distribution of the return period exhibits a more complex shape than the exponential distribution under stationary conditions. Using a nonstationary lognormal model, we document the increased complexity and challenges associated with planning for future flood events over a planning horizon. We compare application of the average return period with the more common concept of reliability and recommend replacing the average return period with reliability as a more practical way to communicate event likelihood in both stationary and nonstationary contexts.

Meteorological detrending of primary and secondary pollutant concentrations: Method application and evaluation using long-term (2000-2012) data in Atlanta

NASA Astrophysics Data System (ADS)

Henneman, Lucas R. F.; Holmes, Heather A.; Mulholland, James A.; Russell, Armistead G.

2015-10-01

The effectiveness of air pollution regulations and controls are evaluated based on measured air pollutant concentrations. Air pollution levels, however, are highly sensitive to both emissions and meteorological fluctuations. Therefore, an assessment of the change in air pollutant levels due to emissions controls must account for these meteorological fluctuations. Two empirical methods to quantify the impact of meteorology on pollutant levels are discussed and applied to the 13-year time period between 2000 and 2012 in Atlanta, GA. The methods employ Kolmogorov-Zurbenko filters and linear regressions to detrended pollutant signals into long-term, seasonal, weekly, short-term, and white-noise components. The methods differ in how changes in weekly and holiday emissions are accounted for. Both can provide meteorological adjustments on a daily basis for future use in acute health analyses. The meteorological impact on daily signals of ozone, NOx, CO, SO2, PM2.5, and PM species are quantified. Analyses show that the substantial decreases in seasonal averages of NOx and SO2 correspond with controls implemented in the metropolitan Atlanta area. Detrending allows for the impacts of some controls to be observed with averaging times of as little as 3 months. Annual average concentrations of NOx, SO2, and CO have all fallen by at least 50% since 2000. Reductions in NOx levels, however, do not lead to uniform reductions in ozone. While average detrended summer average maximum daily average 8 h ozone (MDA8h O3) levels fell by 4% (2.2 ± 2 ppb) between 2000 and 2012, winter averages have increased by 12% (3.8 ± 1.4 ppb), providing further evidence that high ozone levels are NOx-limited and lower ozone concentrations are NOx-inhibited. High ozone days (with MDA8h O3 greater than 60 ppb) decreased both in number and in magnitude over the study period.

Seasonal precipitation forecasting for the Melbourne region using a Self-Organizing Maps approach

NASA Astrophysics Data System (ADS)

Pidoto, Ross; Wallner, Markus; Haberlandt, Uwe

2017-04-01

The Melbourne region experiences highly variable inter-annual rainfall. For close to a decade during the 2000s, below average rainfall seriously affected the environment, water supplies and agriculture. A seasonal rainfall forecasting model for the Melbourne region based on the novel approach of a Self-Organizing Map has been developed and tested for its prediction performance. Predictor variables at varying lead times were first assessed for inclusion within the model by calculating their importance via Random Forests. Predictor variables tested include the climate indices SOI, DMI and N3.4, in addition to gridded global sea surface temperature data. Five forecasting models were developed: an annual model and four seasonal models, each individually optimized for performance through Pearson's correlation r and the Nash-Sutcliffe Efficiency. The annual model showed a prediction performance of r = 0.54 and NSE = 0.14. The best seasonal model was for spring, with r = 0.61 and NSE = 0.31. Autumn was the worst performing seasonal model. The sea surface temperature data contributed fewer predictor variables compared to climate indices. Most predictor variables were supplied at a minimum lead, however some predictors were found at lead times of up to a year.

Social and Built Environmental Correlates of Predicted Blood Lead Levels in the Flint Water Crisis.

PubMed

Sadler, Richard Casey; LaChance, Jenny; Hanna-Attisha, Mona

2017-05-01

To highlight contextual factors tied to increased blood lead level (BLL) risk following the lead-in-water contamination in Flint, Michigan. Using geocoded BLL data collected in 2013 and 2015 and areal interpolation, we predicted BLLs at every residential parcel in the city. We then spatially joined social and built environmental variables to link the parcels with neighborhood-level factors that may influence BLLs. When we compared levels before and during the water crisis, we saw the highest estimates of predicted BLLs during the water crisis and the greatest changes in BLLs in neighborhoods with the longest water residence time in pipes (μ = 2.30 µg/dL; Δ = 0.45 µg/dL), oldest house age (μ = 2.22 µg/dL; Δ = 0.37 µg/dL), and poorest average neighborhood housing condition (μ = 2.18 µg/dL; Δ = 0.44 µg/dL). Key social and built environmental variables correlate with BLL; such information can continue to guide response by prioritizing older, deteriorating neighborhoods with the longest water residence time in pipes.

The Use of Cognitive Cues for Anticipatory Strategies in a Dynamic Postural Control Task - Validation of a Novel Approach to Dual-Task Testing.

PubMed

Laessoe, Uffe; Grarup, Bo; Bangshaab, Jette

2016-01-01

Dual-task testing is relevant in the assessment of postural control. A combination of a primary (motor) and a secondary (distracting cognitive) tasks is most often used. It remains a challenge however, to standardize and monitor the cognitive task. In this study a new dual-task testing approach with a facilitating, rather than distracting, cognitive component was evaluated. Thirty-one community-dwelling elderly and fifteen young people were tested with respect to their ability to use anticipatory postural control strategies. The motor task consisted of twenty-five repetitive tasks in which the participants needed to exceed their limit of stability in order to touch one out of eight lights. The participants performed three tests. In two of the tests the color cues of the lights allowed the participants to utilize cognitive strategies to plan their next movement and improve their performance time. The young performed the baseline motor task test in an average of 29 seconds, while the average time for the elderly was 44 seconds. When comparing the performance time with a leading cue to the time with no cue, the young group improved their performance time significantly better than the elderly did: young: 17% (5), elderly: 5% (8); p<0.001. Similar differences were seen with a more complicated leading cue: young: 12% (5), elderly: 4% (9); p<0.01. The reliability of the test showed moderate to substantial agreement (ICC = 0.74), with a small learning effect between two sessions. The dual-task test was sensitive enough to discriminate between elderly and young people. It revealed that the elderly did not utilize cognitive cues for their anticipatory postural control strategies as well as the young were able to. The test procedure was feasible and comprehensible for the participants, and it may be relevant to standardize a similar test for an alternative dual-task approach in the clinical setting.

A law of order estimation and leading-order terms for a family of averaged quantities on a multibaker chain system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishida, Hideshi, E-mail: ishida@me.es.osaka-u.ac.jp

2014-06-15

In this study, a family of local quantities defined on each partition and its averaging on a macroscopic small region, site, are defined on a multibaker chain system. On its averaged quantities, a law of order estimation in the bulk system is proved, making it possible to estimate the order of the quantities with respect to the representative partition scale parameter Δ. Moreover, the form of the leading-order terms of the averaged quantities is obtained, and the form enables us to have the macroscopic quantity in the continuum limit, as Δ → 0, and to confirm its partitioning independency. Thesemore » deliverables fully explain the numerical results obtained by Ishida, consistent with the irreversible thermodynamics.« less

Trading in markets with noisy information: an evolutionary analysis

NASA Astrophysics Data System (ADS)

Bloembergen, Daan; Hennes, Daniel; McBurney, Peter; Tuyls, Karl

2015-07-01

We analyse the value of information in a stock market where information can be noisy and costly, using techniques from empirical game theory. Previous work has shown that the value of information follows a J-curve, where averagely informed traders perform below market average, and only insiders prevail. Here we show that both noise and cost can change this picture, in several cases leading to opposite results where insiders perform below market average, and averagely informed traders prevail. Moreover, we investigate the effect of random explorative actions on the market dynamics, showing how these lead to a mix of traders being sustained in equilibrium. These results provide insight into the complexity of real marketplaces, and show under which conditions a broad mix of different trading strategies might be sustainable.

Recent warming leads to a rapid borealization of fish communities in the Arctic

NASA Astrophysics Data System (ADS)

Fossheim, Maria; Primicerio, Raul; Johannesen, Edda; Ingvaldsen, Randi B.; Aschan, Michaela M.; Dolgov, Andrey V.

2015-07-01

Arctic marine ecosystems are warming twice as fast as the global average. As a consequence of warming, many incoming species experience increasing abundances and expanding distribution ranges in the Arctic. The Arctic is expected to have the largest species turnover with regard to invading and locally extinct species, with a modelled invasion intensity of five times the global average. Studies in this region might therefore give valuable insights into community-wide shifts of species driven by climate warming. We found that the recent warming in the Barents Sea has led to a change in spatial distribution of fish communities, with boreal communities expanding northwards at a pace reflecting the local climate velocities. Increased abundance and distribution areas of large, migratory fish predators explain the observed community-wide distributional shifts. These shifts change the ecological interactions experienced by Arctic fish species. The Arctic shelf fish community retracted northwards to deeper areas bordering the deep polar basin. Depth might limit further retraction of some of the fish species in the Arctic shelf community. We conclude that climate warming is inducing structural change over large spatial scales at high latitudes, leading to a borealization of fish communities in the Arctic.

Failure rates of leads, pulse generators, and programmers have not diminished over the last 20 years: formal monitoring of performance is still needed. BILITCH Registry and STIMAREC.

PubMed

Kawanishi, D T; Song, S; Furman, S; Parsonnet, V; Pioger, G; Petitot, J C; Godin, J F

1996-11-01

Formal Monitoring of Performance is Still Needed. In order to detect trends in the number of device or component failures that have occurred among permanent pacemaker systems since the 1970s, we reviewed the data of the five largest pacemaker manufacturers from the Bilitch Registry of permanent pacemaker pulse generators, the Stimarec failure registry, the general accounting office summaries of the United States Veterans Administration (VA) Registry of Pacemaker Leads, and the Implantable Lead Registry, from the Cleveland Clinic Lead registry, and the recalls and safety alerts issued by the United States Food and Drug Administration (FDA) over the last 20 years. The definition of failure followed the criterion, or criteria, developed within each registry and differed significantly between the registries. The 20-year period between 1976 and 1995 was divided into 5-year quartiles (QT): QT 1 = 1976-1980; QT2 = 1981-1985; QT3 = 1986-1990; and QT4 = 1991-1995. For pulse generators, the number of models with failures in each quartile in the Bilitch Registry were: QT 1 = 9; QT 2 = 11; QT3 = 17; QT4 = 13. In Stimarec, the number of units reported as having reached a dangerous condition were: QT1 = 710; QT2 = 212; QT3 = 114; QT4 = 310. From the FDA reports, the number of units included in recalls or safety alerts were: QT3 = 6,085; QT4 = 135,766. For permanent pacemaker leads, the numbers of failed or dangerous leads recorded in Stimarec were: QT3 = 16; QT4 = 32. In the VA Registry, the number of models having a below average survival was 2/92 (2.7%). In the Implantable Lead Registry, the number of models having a below average survival was 3/21 (14%). In the Cleveland Clinic series, 6/13 (46%) of lead models were recognized to have some failure involving the conductor, insulation, or connector. In the FDA reports, the number of leads involved in either recall or safety alert were: QT3 = 20,354; QT4 = 332,105. For programmers, the number of units involved either in a recall or safety alert were: QT3 = 11,124; QT4 = 3,528. In all of these series, each of the five largest manufacturers had some models or units involved in each time period. This review of programs has revealed: 1. The incidence of failures, recalls, or safety alerts did not decline over time; and 2. Despite changes in technology, formal monitoring of pacemaker systems is still warranted.

Theoretical research on color indirect effects

NASA Astrophysics Data System (ADS)

Liu, T. C.; Liao, Changjun; Liu, Songhao

1995-05-01

Color indirect effects (CIE) means the physiological and psychological effects of color resulting from color vision. In this paper, we study CIE from the viewpoints of the integrated western and Chinese traditional medicine and the time quantum theory established by C. Y. Liu et al., respectively, and then put forward the color-automatic-nervous-subsystem model that could color excites parasympathetic subsystem and hot color excites sympathetic subsystem. Our theory is in agreement with modern color vision theory, and moreover, it leads to the resolution of the conflict between the color code theory and the time code theory oncolor vision. For the latitude phenomena on athlete stars number and the average lifespan, we also discuss the possibility of UV vision. The applications of our theory lead to our succeeding in explaining a number of physiological and psychological effects of color, in explaining the effects of age on color vision, and in explaining the Chinese chromophototherapy. We also discuss its application to neuroimmunology. This research provides the foundation of the clinical applications of chromophototherapy.

Decision Modeling Framework to Minimize Arrival Delays from Ground Delay Programs

NASA Astrophysics Data System (ADS)

Mohleji, Nandita

Convective weather and other constraints create uncertainty in air transportation, leading to costly delays. A Ground Delay Program (GDP) is a strategy to mitigate these effects. Systematic decision support can increase GDP efficacy, reduce delays, and minimize direct operating costs. In this study, a decision analysis (DA) model is constructed by combining a decision tree and Bayesian belief network. Through a study of three New York region airports, the DA model demonstrates that larger GDP scopes that include more flights in the program, along with longer lead times that provide stakeholders greater notice of a pending program, trigger the fewest average arrival delays. These findings are demonstrated to result in a savings of up to $1,850 per flight. Furthermore, when convective weather is predicted, forecast weather confidences remain the same level or greater at least 70% of the time, supporting more strategic decision making. The DA model thus enables quantification of uncertainties and insights on causal relationships, providing support for future GDP decisions.

The influence of antecedent conditions on flood risk in sub-Saharan Africa

NASA Astrophysics Data System (ADS)

Bischiniotis, Konstantinos; van den Hurk, Bart; Jongman, Brenden; Coughlan de Perez, Erin; Veldkamp, Ted; de Moel, Hans; Aerts, Jeroen

2018-01-01

Most flood early warning systems have predominantly focused on forecasting floods with lead times of hours or days. However, physical processes during longer timescales can also contribute to flood generation. In this study, we follow a pragmatic approach to analyse the hydro-meteorological pre-conditions of 501 historical damaging floods from 1980 to 2010 in sub-Saharan Africa. These are separated into (a) weather timescale (0-6 days) and (b) seasonal timescale conditions (up to 6 months) before the event. The 7-day precipitation preceding a flood event (PRE7) and the standardized precipitation evapotranspiration index (SPEI) are analysed for the two timescale domains, respectively. Results indicate that high PRE7 does not always generate floods by itself. Seasonal SPEIs, which are not directly correlated with PRE7, exhibit positive (wet) values prior to most flood events across different averaging times, indicating a relationship with flooding. This paper provides evidence that bringing together weather and seasonal conditions can lead to improved flood risk preparedness.

Communication: Creation of molecular vibrational motions via the rotation-vibration coupling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shu, Chuan-Cun; School of Engineering and Information Technology, University of New South Wales at the Australian Defence Force Academy, Canberra, ACT 2600; Henriksen, Niels E., E-mail: neh@kemi.dtu.dk

2015-06-14

Building on recent advances in the rotational excitation of molecules, we show how the effect of rotation-vibration coupling can be switched on in a controlled manner and how this coupling unfolds in real time after a pure rotational excitation. We present the first examination of the vibrational motions which can be induced via the rotation-vibration coupling after a pulsed rotational excitation. A time-dependent quantum wave packet calculation for the HF molecule shows how a slow (compared to the vibrational period) rotational excitation leads to a smooth increase in the average bond length whereas a fast rotational excitation leads to amore » non-stationary vibrational motion. As a result, under field-free postpulse conditions, either a stretched stationary bond or a vibrating bond can be created due to the coupling between the rotational and vibrational degrees of freedom. The latter corresponds to a laser-induced breakdown of the adiabatic approximation for rotation-vibration coupling.« less

Executive function mediates prospective relationships between sleep duration and sedentary behavior in children.

PubMed

Warren, Christopher; Riggs, Nathaniel; Pentz, Mary Ann

2016-10-01

Childhood sedentary behavior has been linked to increased obesity risk. Prior work has identified associations between sedentary behavior, executive function (EF), and sleep. This study tested the hypothesis that reduced sleep duration may adversely impact EF and lead to increased childhood sedentary behavior. Southern California schoolchildren participating in the school-based health promotion program Pathways to Health (N=709) were assessed annually from 4th through 6th grades (2010-2013) on self-report measures of sedentary behavior, sleep duration, and executive function. A series of path models were specified treating average nightly sleep duration and weekend wake/bed-time shift at 4th grade as predictors of 6th grade sedentary behavior. Four EF subdomains were tested as potential mediators of longitudinal associations at 5th grade. Significant associations between average nightly sleep duration, EF and sedentary behavior were identified (p<0.05), adjusting for participant gender, physical activity, SES, ethnicity, program group assignment, and the presence/absence of parental screen time rules. Fifth grade overall EF (p<0.05)-and in particular the subdomains of inhibitory control (p<0.05) and organization of materials (p<0.01)-significantly mediated the relationship between 4th grade sleep duration and 6th grade sedentary behavior (p<0.05). Furthermore, delay of weekend bed- or wake-times relative to weekdays was prospectively associated with decreased overall EF (p<0.05), but not increased sedentary behavior (p=0.35 for bed-time delay; p=0.64 for wake-time delay), irrespective of average nightly sleep duration. Findings suggest that sleep promotion efforts may reduce children's sedentary behavior both directly and indirectly through changes in EF. Copyright © 2016 Elsevier Inc. All rights reserved.

Fidelity of life and death molluscan assemblages from carbonate tidal flats in the Persian (Arabian) Gulf

NASA Astrophysics Data System (ADS)

García-Ramos, Diego A.; Albano, Paolo G.; Harzhauser, Mathias; Piller, Werner E.; Zuschin, Martin

2016-04-01

Live-dead (LD) studies aim to help understand how faithfully fossil assemblages can be used to quantitatively infer the structure of the original living communities that generated them. To this purpose, LD comparisons have been conducted in different terrestrial and aquatic environments to assess how environment-specific differences in quality and intensity of taphonomic factors affect LD fidelity. In sub-tropical and tropical settings, most LD studies have focused on hard substrates or seagrass bottoms. Here we present results on molluscan assemblages from soft carbonate sediments in tidal flats of the Persian (Arabian) Gulf (Indo-West Pacific biogeographic province). We analyzed a total of 7193 mollusks collected from six sites comprising time-averaged death assemblages (DAs) and snapshot living assemblages (LAs). All analyses were performed at site and at habitat scales after correcting for sample-size differences. We found a good match in proportional abundance and a notable mismatch in species composition. In fact, species richness in DAs is 6 times larger than in LAs at site scale, and 4 times at habitat scale. Additionally, we found a good fidelity of evenness, and rank abundance of feeding guilds. Other studies have shown that molluscan DAs from subtidal carbonate environments can display lower time-averaging than those from siliciclastic environments due to high rates of shell loss to bioerosion and dissolution. For our case study of tidal flat carbonate settings, we interpret that despite temporal autocorrelation (good fidelity of proportional abundance), substantial differences in species richness and composition can be explained by early cementation, lateral mixing, intense bioturbation and moderate sedimentation rates. Our results suggest that tidal flat carbonate environments can potentially lead to a wider window of time-averaging in comparison with subtidal carbonate settings.

Applying the payoff time framework to carotid artery disease management.

PubMed

Yuo, Theodore H; Roberts, Mark S; Braithwaite, R Scott; Chang, Chung-Chou H; Kraemer, Kevin L

2013-11-01

and Asymptomatic stenosis of the carotid arteries is associated with stroke. Carotid revascularization can reduce the future risk of stroke but can also trigger an immediate stroke. The objective was to model the generic relationship between immediate risk, long-term benefit, and life expectancy for any one-time prophylactic treatment and then apply the model to the use of revascularization in the management of asymptomatic carotid disease. In the "payoff time" framework, the possibility of losing quality-adjusted life-years (QALYs) because of revascularization failure is conceptualized as an "investment" that is eventually recouped over time, on average. Using this framework, we developed simple mathematical forms that define relationships between the following: perioperative probability of stroke (P); annual stroke rate without revascularization (r0); annual stroke rate after revascularization, conditional on not having suffered perioperative stroke (r1); utility levels assigned to the asymptomatic state (ua) and stroke state (us); and mortality rates (λ). In patients whose life expectancy is below a critical life expectancy (CLE = P/(1-P)r0-r1, the "investment" will never pay off, and revascularization will lead to loss of QALYs, on average. CLE is independent of utilities assigned to the health states if a rank ordering exists in which ua > us. For clinically relevant values (P = 3%, r0 = 1%, r1 = 0.5%), the CLE is approximately 6.4 years, which is longer than published guidelines regarding patient selection for revascularization. In managing asymptomatic carotid disease, the payoff time framework specifies a CLE beneath which patients, on average, will not benefit from revascularization. This formula is suitable for clinical use at the patient's bedside and can account for patient variability, the ability of clinicians who perform revascularization, and the particular revascularization technology that is chosen.

Executive function mediates prospective relationships between sleep duration and sedentary behavior in children

PubMed Central

Warren, Christopher; Riggs, Nathaniel; Pentz, Mary Ann

2016-01-01

Childhood sedentary behavior has been linked to increased obesity risk. Prior work has identified associations between sedentary behavior, executive function (EF), and sleep. This study tested the hypothesis that reduced sleep duration may adversely impact EF and lead to increased childhood sedentary behavior. Southern California schoolchildren participating in the school-based health promotion program Pathways to Health (N = 709) were assessed annually from 4th through 6th grades (2010–2013) on self-report measures of sedentary behavior, sleep duration, and executive function. A series of path models were specified treating average nightly sleep duration and weekend wake/bed-time shift at 4th grade as predictors of 6th grade sedentary behavior. Four EF subdomains were tested as potential mediators of longitudinal associations at 5th grade. Significant associations between average nightly sleep duration, EF and sedentary behavior were identified (p < 0.05), adjusting for participant gender, physical activity, SES, ethnicity, program group assignment, and the presence/absence of parental screen time rules. Fifth grade overall EF (p < 0.05)—and in particular the subdomains of inhibitory control (p < 0.05) and organization of materials (p < 0.01)—significantly mediated the relationship between 4th grade sleep duration and 6th grade sedentary behavior (p < 0.05). Furthermore, delay of weekend bed- or wake-times relative to weekdays was prospectively associated with decreased overall EF (p < 0.05), but not increased sedentary behavior (p = 0.35 for bed-time delay; p = 0.64 for wake-time delay), irrespective of average nightly sleep duration. Findings suggest that sleep promotion efforts may reduce children’s sedentary behavior both directly and indirectly through changes in EF. PMID:27477059

Co-surgeons in breast reconstructive microsurgery: What do they bring to the table?

PubMed

Haddock, Nicholas T; Kayfan, Samar; Pezeshk, Ronnie A; Teotia, Sumeet S

2018-01-01

Current research within other surgical specialties suggests that a co-surgeon approach may reduce operative times and complications associated with complex bilateral procedures, possibly leading to improved patient and surgical outcomes. We sought to evaluate the role of the co-surgery team and its development in free flap breast reconstruction. A retrospective review of free-flap breast reconstruction by two surgeons from 2011 to 2016 was conducted. We analyzed 128 patients who underwent bilateral-DIEP breast. Surgical groups were: single-surgeon reconstruction (SSR; 35 patients), co-surgery where both surgeons are present for entire reconstruction (CSR-I; 69 patients), and co-surgery reconstruction where co-surgeons appropriately assist in two concurrent or staggered cases (CSR-II; 24 patients). Efficiency data collected was OR time and patient length-of-stay (LOS). The rate of flap-failure, return to OR, infection, wound breakdown, seroma, hematoma, and PE/DVT were compared. Single-surgeon reconstruction had significantly longer OR time (678 vs. 485 min, P < .0001), LOS (5 vs. 3.9 days, P < .001), higher wound occurrences of the umbilical site that required surgical correction [11.4 percent (n = 4) vs. 1.5% (n = 1); P < .043] compared to CSR-I. Similarly, SSR had significantly longer average OR time (678 vs. 527 min P < .0001), average LOS (5 vs. 4 days, P = .0005) when compared with CSR-II. There were no total increased patient related complications associated with co-surgery (CSR-I or II). The addition of a co-surgeon, even with concurrent surgery, reduces operative time, average patient LOS, and postoperative complications. This work lends a strong credence that co-surgery model is associated with increased operative efficiency. © 2017 Wiley Periodicals, Inc.

Alternatives to national average income data as eligibility criteria for international subsidies: a social justice perspective.

PubMed

Shebaya, Sirine; Sutherland, Andrea; Levine, Orin; Faden, Ruth

2010-12-01

Current strategies to address global inequities in access to life-saving vaccines use averaged national income data to determine eligibility. While largely successful in the lowest income countries, we argue that this approach could lead to significant inefficiencies from the standpoint of justice if applied to middle-income countries, where income inequalities are large and lead to national averages that obscure truly needy populations. Instead, we suggest alternative indicators more sensitive to social justice concerns that merit consideration by policy-makers developing new initiatives to redress health inequities in middle-income countries. © 2009 Blackwell Publishing Ltd.

Predicting atmospheric states from local dynamical properties of the underlying attractor

NASA Astrophysics Data System (ADS)

Faranda, Davide; Rodrigues, David; Alvarez-Castro, M. Carmen; Messori, Gabriele; Yiou, Pascal

2017-04-01

Mid-latitude flows are characterized by a chaotic dynamics and recurring patterns hinting to the existence of an atmospheric attractor. In 1963 Lorenz described this object as: "the collection of all states that the system can assume or approach again and again, as opposed to those that it will ultimately avoid" and analyzed a low dimensional system describing a convective dynamics whose attractor has the shape of a butterfly. Since then, many studies try to find equivalent of the Lorenz butterfly in the complex atmospheric dynamics. Most of the studies where focused to determine the average dimension D of the attractor i.e. the number of degrees of freedom sufficient to describe the atmospheric circulation. However, obtaining reliable estimates of D has proved challenging. Moreover, D does not provide information on transient atmospheric motions, such as those leading to weather extremes. Using recent developments in dynamical systems theory, we show that such motions can be classified through instantaneous rather than average properties of the attractor. The instantaneous properties are uniquely determined by instantaneous dimension and stability. Their extreme values correspond to specific atmospheric patterns, and match extreme weather occurrences. We further show the existence of a significant correlation between the time series of instantaneous stability and dimension and the mean spread of sea-level pressure fields in an operational ensemble weather forecast at lead times of over two weeks. Instantaneous properties of the attractor therefore provide an efficient way of evaluating and informing operational weather forecasts.

100 obese patients after laparoscopic adjustable gastric banding - the influence on BMI, gherlin and insulin concentration, parameters of lipid balance and co-morbidities.

PubMed

Hady, H R; Dadan, J; Gołaszewski, P

2012-06-01

Obesity is a widespread health issue caused by chronic impaired balance between energy supply and its expenditure. It leads to gathering of excessive fat tissue and numerous co-morbidities.The aim of this study is to present the influence of laparoscopic adjustable gastric banding (LAGB) on plasma ghrelin, insulin, glucose, triglycerides, total, HDL- and LDL-cholesterol concentration as well as on alanine and aspartate aminotransferase in obese patients and influence on co-morbidities such as type 2 diabetes mellitus, dislipidemy, hypertension and sleep apnea. 100 obese patients underwent LAGB: 34 men - average age 39.18 ± 12.17 years old and 66 women - average age 37.0 ± 12.6 years old. During 6 months follow-up, particular measurements have been conducted in different time points. Evaluation of body mass loss (%EWL, %EBL) and the homeostatic model assessment insulin resistance (HOMA IR) was conducted. In the same time ghrelin, insulin, glucose, triglycerides, total cholesterol, HDL- and LDL-cholesterol concentration was determined after 7 days, 1, 3 and 6 months after the surgery. Significant decrease in BMI and HOMA IR was observed as well as in insulin and glucose concentration. Increase in ghrelin concentration in comparison to preoperative values was also stated. LAGB leads to significant body mass loss, improvement in patients' general health state and to normalization of metabolic parameters. Improvement or total resolution of type 2 diabetes (T2DM), hypertension and sleep apnea was also noticed.

Changing characteristics of streamflow in the Midwest and its relation to oceanic-atmospheric oscillations

NASA Astrophysics Data System (ADS)

Thakur, B.; Pathak, P.; Kalra, A.; Ahmad, S.

2016-12-01

The identification of primary drivers of streamflow may prove beneficial in forecasting streamflow in the Midwestern U.S. In the past researches, streamflow in the region have been strongly correlated with El Niño-Southern Oscillation (ENSO), Atlantic Multidecadal Oscillation (AMO) and Pacific Decadal Oscillation (PDO). The present study takes in to account the pre-defined Pacific and Atlantic Ocean regions (e.g., ENSO, PDO, AMO) along with new regions with an intent to identify new significantly correlated regions. This study assesses the interrelationship between sea surface temperatures (SST) anomalies in the Pacific and Atlantic Ocean and seasonal streamflow in the Midwestern U.S. Average Pacific and Atlantic Ocean SST anomalies, were calculated for 2 different 3 month series: September-November and December-February so as to create a lead time varying from 3 to 9 months. Streamflow were averaged for three seasons: spring (April-June), spring-summer (April-August) and summer (June-August). The correlation between streamflow and SST is analyzed using singular value decomposition for a period of 1960-2013. The result of the study showed several regions-other than the known Pacific and Atlantic Ocean regions- that were significantly correlated with streamflow stations. Higher correlation between the climate indices and streamflow were observed as the lead time decreased. The identification of the associations between SST and streamflow and significant SST regions in the Pacific and Atlantic Ocean may enhance the skill of streamflow predictability and water management in the region.

Detection of small earthquakes with dense array data: example from the San Jacinto fault zone, southern California

NASA Astrophysics Data System (ADS)

Meng, Haoran; Ben-Zion, Yehuda

2018-01-01

We present a technique to detect small earthquakes not included in standard catalogues using data from a dense seismic array. The technique is illustrated with continuous waveforms recorded in a test day by 1108 vertical geophones in a tight array on the San Jacinto fault zone. Waveforms are first stacked without time-shift in nine non-overlapping subarrays to increase the signal-to-noise ratio. The nine envelope functions of the stacked records are then multiplied with each other to suppress signals associated with sources affecting only some of the nine subarrays. Running a short-term moving average/long-term moving average (STA/LTA) detection algorithm on the product leads to 723 triggers in the test day. Using a local P-wave velocity model derived for the surface layer from Betsy gunshot data, 5 s long waveforms of all sensors around each STA/LTA trigger are beamformed for various incident directions. Of the 723 triggers, 220 are found to have localized energy sources and 103 of these are confirmed as earthquakes by verifying their observation at 4 or more stations of the regional seismic network. This demonstrates the general validity of the method and allows processing further the validated events using standard techniques. The number of validated events in the test day is >5 times larger than that in the standard catalogue. Using these events as templates can lead to additional detections of many more earthquakes.

High atmospheric temperatures and ‘ambient incubation’ drive embryonic development and lead to earlier hatching in a passerine bird

PubMed Central

Griffith, Simon C.; Mainwaring, Mark C.; Sorato, Enrico; Beckmann, Christa

2016-01-01

Tropical and subtropical species typically experience relatively high atmospheric temperatures during reproduction, and are subject to climate-related challenges that are largely unexplored, relative to more extensive work conducted in temperate regions. We studied the effects of high atmospheric and nest temperatures during reproduction in the zebra finch. We characterized the temperature within nests in a subtropical population of this species in relation to atmospheric temperature. Temperatures within nests frequently exceeded the level at which embryo’s develop optimally, even in the absence of parental incubation. We experimentally manipulated internal nest temperature to demonstrate that an average difference of 6°C in the nest temperature during the laying period reduced hatching time by an average of 3% of the total incubation time, owing to ‘ambient incubation’. Given the avian constraint of laying a single egg per day, the first eggs of a clutch are subject to prolonged effects of nest temperature relative to later laid eggs, potentially increasing hatching asynchrony. While birds may ameliorate the negative effects of ambient incubation on embryonic development by varying the location and design of their nests, high atmospheric temperatures are likely to constitute an important selective force on avian reproductive behaviour and physiology in subtropical and tropical regions, particularly in the light of predicted climate change that in many areas is leading to a higher frequency of hot days during the periods when birds breed. PMID:26998315

40 CFR 421.252 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... silver smelted Lead 0.546 0.260 Mercury 0.325 0.130 Silver 0.533 0.221 Zinc 1.898 0.793 Gold 0.130 Oil... monthly average mg/troy ounce of silver reduced in solution Lead 0.168 0.080 Mercury 0.100 0.040 Silver 0... property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold refined electrolytically...

Leading medical causes of mortality among male prisoners in Texas, 1992--2003.

PubMed

Harzke, Amy J; Baillargeon, Jacques G; Kelley, Michael F; Pruitt, Sandi L; Pulvino, John S; Paar, David P

2011-07-01

Data from the Texas prison system and the Texas Vital Statistics Bureau were used to identify and assess the leading medical causes of death from 1992 to 2003 among male prisoners in Texas (N = 4,026). The leading medical causes of death were infection, cancer, cardiovascular disease (CVD), liver disease, and respiratory disease. Of these, only cancer showed a significant average annual increase in crude death rates (2.5% [0.2% to 4.9%]). Among prisoners aged 55 to 84 years, crude average annual death rates due to cancer and CVD were high and substantially exceeded death rates due to other causes. Among prisoners aged 25 to 44 years, crude average annual death rates due to infection exceeded death rates due to other causes. Continued improvements in the prevention, screening, and treatment of these conditions are warranted in correctional health care settings.

Design Patterns to Achieve 300x Speedup for Oceanographic Analytics in the Cloud

NASA Astrophysics Data System (ADS)

Jacob, J. C.; Greguska, F. R., III; Huang, T.; Quach, N.; Wilson, B. D.

2017-12-01

We describe how we achieve super-linear speedup over standard approaches for oceanographic analytics on a cluster computer and the Amazon Web Services (AWS) cloud. NEXUS is an open source platform for big data analytics in the cloud that enables this performance through a combination of horizontally scalable data parallelism with Apache Spark and rapid data search, subset, and retrieval with tiled array storage in cloud-aware NoSQL databases like Solr and Cassandra. NEXUS is the engine behind several public portals at NASA and OceanWorks is a newly funded project for the ocean community that will mature and extend this capability for improved data discovery, subset, quality screening, analysis, matchup of satellite and in situ measurements, and visualization. We review the Python language API for Spark and how to use it to quickly convert existing programs to use Spark to run with cloud-scale parallelism, and discuss strategies to improve performance. We explain how partitioning the data over space, time, or both leads to algorithmic design patterns for Spark analytics that can be applied to many different algorithms. We use NEXUS analytics as examples, including area-averaged time series, time averaged map, and correlation map.

Foreign exchange market data analysis reveals statistical features that predict price movement acceleration.

PubMed

Nacher, Jose C; Ochiai, Tomoshiro

2012-05-01

Increasingly accessible financial data allow researchers to infer market-dynamics-based laws and to propose models that are able to reproduce them. In recent years, several stylized facts have been uncovered. Here we perform an extensive analysis of foreign exchange data that leads to the unveiling of a statistical financial law. First, our findings show that, on average, volatility increases more when the price exceeds the highest (or lowest) value, i.e., breaks the resistance line. We call this the breaking-acceleration effect. Second, our results show that the probability P(T) to break the resistance line in the past time T follows power law in both real data and theoretically simulated data. However, the probability calculated using real data is rather lower than the one obtained using a traditional Black-Scholes (BS) model. Taken together, the present analysis characterizes a different stylized fact of financial markets and shows that the market exceeds a past (historical) extreme price fewer times than expected by the BS model (the resistance effect). However, when the market does, we predict that the average volatility at that time point will be much higher. These findings indicate that any Markovian model does not faithfully capture the market dynamics.

Foreign exchange market data analysis reveals statistical features that predict price movement acceleration

NASA Astrophysics Data System (ADS)

Nacher, Jose C.; Ochiai, Tomoshiro

2012-05-01

Increasingly accessible financial data allow researchers to infer market-dynamics-based laws and to propose models that are able to reproduce them. In recent years, several stylized facts have been uncovered. Here we perform an extensive analysis of foreign exchange data that leads to the unveiling of a statistical financial law. First, our findings show that, on average, volatility increases more when the price exceeds the highest (or lowest) value, i.e., breaks the resistance line. We call this the breaking-acceleration effect. Second, our results show that the probability P(T) to break the resistance line in the past time T follows power law in both real data and theoretically simulated data. However, the probability calculated using real data is rather lower than the one obtained using a traditional Black-Scholes (BS) model. Taken together, the present analysis characterizes a different stylized fact of financial markets and shows that the market exceeds a past (historical) extreme price fewer times than expected by the BS model (the resistance effect). However, when the market does, we predict that the average volatility at that time point will be much higher. These findings indicate that any Markovian model does not faithfully capture the market dynamics.

Effects of different analysis techniques and recording duty cycles on passive acoustic monitoring of killer whales.

PubMed

Riera, Amalis; Ford, John K; Ross Chapman, N

2013-09-01

Killer whales in British Columbia are at risk, and little is known about their winter distribution. Passive acoustic monitoring of their year-round habitat is a valuable supplemental method to traditional visual and photographic surveys. However, long-term acoustic studies of odontocetes have some limitations, including the generation of large amounts of data that require highly time-consuming processing. There is a need to develop tools and protocols to maximize the efficiency of such studies. Here, two types of analysis, real-time and long term spectral averages, were compared to assess their performance at detecting killer whale calls in long-term acoustic recordings. In addition, two different duty cycles, 1/3 and 2/3, were tested. Both the use of long term spectral averages and a lower duty cycle resulted in a decrease in call detection and positive pod identification, leading to underestimations of the amount of time the whales were present. The impact of these limitations should be considered in future killer whale acoustic surveys. A compromise between a lower resolution data processing method and a higher duty cycle is suggested for maximum methodological efficiency.

A separate phase drag model and a surrogate approximation for simulation of the steam assisted gravity drainage (SAGD) process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padrino-Inciarte, Juan Carlos; Ma, Xia; VanderHeyden, W. Brian

General ensemble phase averaged equations for multiphase flows have been specialized for the simulation of the steam assisted gravity drainage (SAGD) process. In the average momentum equation, fluid-solid and fluid-fluid viscous interactions are represented by separate force terms. This equation has a form similar to that of Darcy’s law for multiphase flow but augmented by the fluid-fluid viscous forces. Models for these fluid-fluid interactions are suggested and implemented into the numerical code CartaBlanca. Numerical results indicate that the model captures the main features of the multiphase flow in the SAGD process, but the detailed features, such as plumes are missed.more » We find that viscous coupling among the fluid phases is important. Advection time scales for the different fluids differ by several orders of magnitude because of vast viscosity differences. Numerically resolving all of these time scales is time consuming. To address this problem, we introduce a steam surrogate approximation to increase the steam advection time scale, while keeping the mass and energy fluxes well approximated. This approximation leads to about a 40-fold speed-up in execution speed of the numerical calculations at the cost of a few percent error in the relevant quantities.« less

Time series inversion of spectra from ground-based radiometers

NASA Astrophysics Data System (ADS)

Christensen, O. M.; Eriksson, P.

2013-07-01

Retrieving time series of atmospheric constituents from ground-based spectrometers often requires different temporal averaging depending on the altitude region in focus. This can lead to several datasets existing for one instrument, which complicates validation and comparisons between instruments. This paper puts forth a possible solution by incorporating the temporal domain into the maximum a posteriori (MAP) retrieval algorithm. The state vector is increased to include measurements spanning a time period, and the temporal correlations between the true atmospheric states are explicitly specified in the a priori uncertainty matrix. This allows the MAP method to effectively select the best temporal smoothing for each altitude, removing the need for several datasets to cover different altitudes. The method is compared to traditional averaging of spectra using a simulated retrieval of water vapour in the mesosphere. The simulations show that the method offers a significant advantage compared to the traditional method, extending the sensitivity an additional 10 km upwards without reducing the temporal resolution at lower altitudes. The method is also tested on the Onsala Space Observatory (OSO) water vapour microwave radiometer confirming the advantages found in the simulation. Additionally, it is shown how the method can interpolate data in time and provide diagnostic values to evaluate the interpolated data.

Absolute dual-comb spectroscopy at 1.55 μm by free-running Er:fiber lasers

NASA Astrophysics Data System (ADS)

Cassinerio, Marco; Gambetta, Alessio; Coluccelli, Nicola; Laporta, Paolo; Galzerano, Gianluca

2014-06-01

We report on a compact scheme for absolute referencing and coherent averaging for dual-comb based spectrometers, exploiting a single continuous-wave (CW) laser in a transfer oscillator configuration. The same CW laser is used for both absolute calibration of the optical frequency axis and the generation of a correction signal which is used for a real-time jitter compensation in a fully electrical feed-forward scheme. The technique is applied to a near-infrared spectrometer based on a pair of free-running mode-locked Er:fiber lasers, allowing to perform real-time absolute-frequency measurements over an optical bandwidth of more than 25 nm, with coherent interferogram averaging over 1-s acquisition time, leading to a signal-to-noise ratio improvement of 29 dB over the 50 μs single shot acquisition. Using 10-cm single pass cell, a value of 1.9 × 10-4 cm-1 Hz-0.5 noise-equivalent-absorption over 1 s integration time is obtained, which can be further scaled down with a multi-pass or resonant cavity. The adoption of a single CW laser, together with the absence of optical locks, and the full-fiber design makes this spectrometer a robust and compact system to be employed in gas-sensing applications.

A separate phase drag model and a surrogate approximation for simulation of the steam assisted gravity drainage (SAGD) process

DOE PAGES

Padrino-Inciarte, Juan Carlos; Ma, Xia; VanderHeyden, W. Brian; ...

2016-01-01

General ensemble phase averaged equations for multiphase flows have been specialized for the simulation of the steam assisted gravity drainage (SAGD) process. In the average momentum equation, fluid-solid and fluid-fluid viscous interactions are represented by separate force terms. This equation has a form similar to that of Darcy’s law for multiphase flow but augmented by the fluid-fluid viscous forces. Models for these fluid-fluid interactions are suggested and implemented into the numerical code CartaBlanca. Numerical results indicate that the model captures the main features of the multiphase flow in the SAGD process, but the detailed features, such as plumes are missed.more » We find that viscous coupling among the fluid phases is important. Advection time scales for the different fluids differ by several orders of magnitude because of vast viscosity differences. Numerically resolving all of these time scales is time consuming. To address this problem, we introduce a steam surrogate approximation to increase the steam advection time scale, while keeping the mass and energy fluxes well approximated. This approximation leads to about a 40-fold speed-up in execution speed of the numerical calculations at the cost of a few percent error in the relevant quantities.« less

Experimental Investigation of an Air-Cooled Turbine Operating in a Turbojet Engine at Turbine Inlet Temperatures up to 2500 F

NASA Technical Reports Server (NTRS)

Cochran, Reeves P.; Dengler, Robert P.

1961-01-01

An experimental investigation was made of an air-cooled turbine at average turbine inlet temperatures up to 2500 F. A modified production-model 12-stage axial-flow-compressor turbojet engine operating in a static sea-level stand was used as the test vehicle. The modifications to the engine consisted of the substitution of special combustor and turbine assemblies and double-walled exhaust ducting for the standard parts of the engine. All of these special parts were air-cooled to withstand the high operating temperatures of the investigation. The air-cooled turbine stator and rotor blades were of the corrugated-insert type. Leading-edge tip caps were installed on the rotor blades to improve leading-edge cooling by diverting the discharge of coolant to regions of lower gas pressure toward the trailing edge of the blade tip. Caps varying in length from 0.15- to 0.55-chord length were used in an attempt to determine the optimum cap length for this blade. The engine was operated over a range of average turbine inlet temperatures from about 1600 to about 2500 F, and a range of average coolant-flow ratios of 0.012 to 0.065. Temperatures of the air-cooled turbine rotor blades were measured at all test conditions by the use of thermocouples and temperature-indicating paints. The results of the investigation indicated that this type of blade is feasible for operation in turbojet engines at the average turbine inlet temperatures and stress levels tested(maximums of 2500 F and 24,000 psi, respectively). An average one-third-span blade temperature of 1300 F could be maintained on 0.35-chord tip cap blades with an average coolant-flow ratio of about 0.022 when the average turbine inlet temperature was 2500 F and cooling-air temperature was about 260 F. All of the leading-edge tip cap lengths improved the cooling of the leading-edge region of the blades, particularly at low average coolant-flow ratios. At high gas temperatures, such parts as the turbine stator and the combustor liners are likely to be as critical as the turbine rotor blades.

Field evaluation of the error arising from inadequate time averaging in the standard use of depth-integrating suspended-sediment samplers

USGS Publications Warehouse

Topping, David J.; Rubin, David M.; Wright, Scott A.; Melis, Theodore S.

2011-01-01

Several common methods for measuring suspended-sediment concentration in rivers in the United States use depth-integrating samplers to collect a velocity-weighted suspended-sediment sample in a subsample of a river cross section. Because depth-integrating samplers are always moving through the water column as they collect a sample, and can collect only a limited volume of water and suspended sediment, they collect only minimally time-averaged data. Four sources of error exist in the field use of these samplers: (1) bed contamination, (2) pressure-driven inrush, (3) inadequate sampling of the cross-stream spatial structure in suspended-sediment concentration, and (4) inadequate time averaging. The first two of these errors arise from misuse of suspended-sediment samplers, and the third has been the subject of previous study using data collected in the sand-bedded Middle Loup River in Nebraska. Of these four sources of error, the least understood source of error arises from the fact that depth-integrating samplers collect only minimally time-averaged data. To evaluate this fourth source of error, we collected suspended-sediment data between 1995 and 2007 at four sites on the Colorado River in Utah and Arizona, using a P-61 suspended-sediment sampler deployed in both point- and one-way depth-integrating modes, and D-96-A1 and D-77 bag-type depth-integrating suspended-sediment samplers. These data indicate that the minimal duration of time averaging during standard field operation of depth-integrating samplers leads to an error that is comparable in magnitude to that arising from inadequate sampling of the cross-stream spatial structure in suspended-sediment concentration. This random error arising from inadequate time averaging is positively correlated with grain size and does not largely depend on flow conditions or, for a given size class of suspended sediment, on elevation above the bed. Averaging over time scales >1 minute is the likely minimum duration required to result in substantial decreases in this error. During standard two-way depth integration, a depth-integrating suspended-sediment sampler collects a sample of the water-sediment mixture during two transits at each vertical in a cross section: one transit while moving from the water surface to the bed, and another transit while moving from the bed to the water surface. As the number of transits is doubled at an individual vertical, this error is reduced by ~30 percent in each size class of suspended sediment. For a given size class of suspended sediment, the error arising from inadequate sampling of the cross-stream spatial structure in suspended-sediment concentration depends only on the number of verticals collected, whereas the error arising from inadequate time averaging depends on both the number of verticals collected and the number of transits collected at each vertical. Summing these two errors in quadrature yields a total uncertainty in an equal-discharge-increment (EDI) or equal-width-increment (EWI) measurement of the time-averaged velocity-weighted suspended-sediment concentration in a river cross section (exclusive of any laboratory-processing errors). By virtue of how the number of verticals and transits influences the two individual errors within this total uncertainty, the error arising from inadequate time averaging slightly dominates that arising from inadequate sampling of the cross-stream spatial structure in suspended-sediment concentration. Adding verticals to an EDI or EWI measurement is slightly more effective in reducing the total uncertainty than adding transits only at each vertical, because a new vertical contributes both temporal and spatial information. However, because collection of depth-integrated samples at more transits at each vertical is generally easier and faster than at more verticals, addition of a combination of verticals and transits is likely a more practical approach to reducing the total uncertainty in most field situatio

Effects of correlations and fees in random multiplicative environments: Implications for portfolio management.

PubMed

Alper, Ofer; Somekh-Baruch, Anelia; Pirvandy, Oz; Schaps, Malka; Yaari, Gur

2017-08-01

Geometric Brownian motion (GBM) is frequently used to model price dynamics of financial assets, and a weighted average of multiple GBMs is commonly used to model a financial portfolio. Diversified portfolios can lead to an increased exponential growth compared to a single asset by effectively reducing the effective noise. The sum of GBM processes is no longer a log-normal process and has a complex statistical properties. The nonergodicity of the weighted average process results in constant degradation of the exponential growth from the ensemble average toward the time average. One way to stay closer to the ensemble average is to maintain a balanced portfolio: keep the relative weights of the different assets constant over time. To keep these proportions constant, whenever assets values change, it is necessary to rebalance their relative weights, exposing this strategy to fees (transaction costs). Two strategies that were suggested in the past for cases that involve fees are rebalance the portfolio periodically and rebalance it in a partial way. In this paper, we study these two strategies in the presence of correlations and fees. We show that using periodic and partial rebalance strategies, it is possible to maintain a steady exponential growth while minimizing the losses due to fees. We also demonstrate how these redistribution strategies perform in a phenomenal way on real-world market data, despite the fact that not all assumptions of the model hold in these real-world systems. Our results have important implications for stochastic dynamics in general and to portfolio management in particular, as we show that there is a superior alternative to the common buy-and-hold strategy, even in the presence of correlations and fees.

Effects of correlations and fees in random multiplicative environments: Implications for portfolio management

NASA Astrophysics Data System (ADS)

Alper, Ofer; Somekh-Baruch, Anelia; Pirvandy, Oz; Schaps, Malka; Yaari, Gur

2017-08-01

Geometric Brownian motion (GBM) is frequently used to model price dynamics of financial assets, and a weighted average of multiple GBMs is commonly used to model a financial portfolio. Diversified portfolios can lead to an increased exponential growth compared to a single asset by effectively reducing the effective noise. The sum of GBM processes is no longer a log-normal process and has a complex statistical properties. The nonergodicity of the weighted average process results in constant degradation of the exponential growth from the ensemble average toward the time average. One way to stay closer to the ensemble average is to maintain a balanced portfolio: keep the relative weights of the different assets constant over time. To keep these proportions constant, whenever assets values change, it is necessary to rebalance their relative weights, exposing this strategy to fees (transaction costs). Two strategies that were suggested in the past for cases that involve fees are rebalance the portfolio periodically and rebalance it in a partial way. In this paper, we study these two strategies in the presence of correlations and fees. We show that using periodic and partial rebalance strategies, it is possible to maintain a steady exponential growth while minimizing the losses due to fees. We also demonstrate how these redistribution strategies perform in a phenomenal way on real-world market data, despite the fact that not all assumptions of the model hold in these real-world systems. Our results have important implications for stochastic dynamics in general and to portfolio management in particular, as we show that there is a superior alternative to the common buy-and-hold strategy, even in the presence of correlations and fees.

Forecasting Influenza Epidemics in Hong Kong.

PubMed

Yang, Wan; Cowling, Benjamin J; Lau, Eric H Y; Shaman, Jeffrey

2015-07-01

Recent advances in mathematical modeling and inference methodologies have enabled development of systems capable of forecasting seasonal influenza epidemics in temperate regions in real-time. However, in subtropical and tropical regions, influenza epidemics can occur throughout the year, making routine forecast of influenza more challenging. Here we develop and report forecast systems that are able to predict irregular non-seasonal influenza epidemics, using either the ensemble adjustment Kalman filter or a modified particle filter in conjunction with a susceptible-infected-recovered (SIR) model. We applied these model-filter systems to retrospectively forecast influenza epidemics in Hong Kong from January 1998 to December 2013, including the 2009 pandemic. The forecast systems were able to forecast both the peak timing and peak magnitude for 44 epidemics in 16 years caused by individual influenza strains (i.e., seasonal influenza A(H1N1), pandemic A(H1N1), A(H3N2), and B), as well as 19 aggregate epidemics caused by one or more of these influenza strains. Average forecast accuracies were 37% (for both peak timing and magnitude) at 1-3 week leads, and 51% (peak timing) and 50% (peak magnitude) at 0 lead. Forecast accuracy increased as the spread of a given forecast ensemble decreased; the forecast accuracy for peak timing (peak magnitude) increased up to 43% (45%) for H1N1, 93% (89%) for H3N2, and 53% (68%) for influenza B at 1-3 week leads. These findings suggest that accurate forecasts can be made at least 3 weeks in advance for subtropical and tropical regions.

Forecasting Influenza Epidemics in Hong Kong

PubMed Central

Yang, Wan; Cowling, Benjamin J.; Lau, Eric H. Y.; Shaman, Jeffrey

2015-01-01

Recent advances in mathematical modeling and inference methodologies have enabled development of systems capable of forecasting seasonal influenza epidemics in temperate regions in real-time. However, in subtropical and tropical regions, influenza epidemics can occur throughout the year, making routine forecast of influenza more challenging. Here we develop and report forecast systems that are able to predict irregular non-seasonal influenza epidemics, using either the ensemble adjustment Kalman filter or a modified particle filter in conjunction with a susceptible-infected-recovered (SIR) model. We applied these model-filter systems to retrospectively forecast influenza epidemics in Hong Kong from January 1998 to December 2013, including the 2009 pandemic. The forecast systems were able to forecast both the peak timing and peak magnitude for 44 epidemics in 16 years caused by individual influenza strains (i.e., seasonal influenza A(H1N1), pandemic A(H1N1), A(H3N2), and B), as well as 19 aggregate epidemics caused by one or more of these influenza strains. Average forecast accuracies were 37% (for both peak timing and magnitude) at 1-3 week leads, and 51% (peak timing) and 50% (peak magnitude) at 0 lead. Forecast accuracy increased as the spread of a given forecast ensemble decreased; the forecast accuracy for peak timing (peak magnitude) increased up to 43% (45%) for H1N1, 93% (89%) for H3N2, and 53% (68%) for influenza B at 1-3 week leads. These findings suggest that accurate forecasts can be made at least 3 weeks in advance for subtropical and tropical regions. PMID:26226185

The last two centuries of lead pollution in the southern Gulf of Mexico recorded in the annual bands of the scleractinian coral Orbicella faveolata.

PubMed

Horta-Puga, Guillermo; Carriquiry, José D

2014-05-01

Lead (Pb) pollution history (1855-2001 A.D.) of the southern Gulf of Mexico (SGM) was reconstructed from the geochemical record contained in the annual bands of the hermatypic coral Orbicella faveolata from the Veracruz Reef System, Mexico. Pb concentrations ranged from 5.5 μg/g in 1889-23.6 μg/g in 1992, with an average of 10.0 ± 4.1 μg/g. These high concentrations are evidence of a highly polluted environment. High statistical correlations were observed between the annual Pb coral time-series and both, the production of alkyl-lead gasoline in Mexico during the second half of the twentieth century (r = 0.86, p < 0.001), and the industrial production of lead in North America for the 1900-1940 years period (r = 0.73, p < 0.001). Hence, this research provides evidence that these two processes generated Pb-rich aerosols that were atmospherically transported, increasing the environmental levels of Pb in the SGM.

40 CFR 421.75 - Pretreatment standards for existing sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (g) Subpart G—Hard Lead Refining Slag Granulation. PSES Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kkg (pounds per billion pounds) of hard lead produced Lead .000 .000 Zinc .000 .000 (h) Subpart G—Hard Lead Refining Wet Air Pollution Control. PSES Pollutant or...

40 CFR 421.75 - Pretreatment standards for existing sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (g) Subpart G—Hard Lead Refining Slag Granulation. PSES Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kkg (pounds per billion pounds) of hard lead produced Lead .000 .000 Zinc .000 .000 (h) Subpart G—Hard Lead Refining Wet Air Pollution Control. PSES Pollutant or...

Cooperative dynamics in auditory brain response

NASA Astrophysics Data System (ADS)

Kwapień, J.; DrożdŻ, S.; Liu, L. C.; Ioannides, A. A.

1998-11-01

Simultaneous estimates of activity in the left and right auditory cortex of five normal human subjects were extracted from multichannel magnetoencephalography recordings. Left, right, and binaural stimulations were used, in separate runs, for each subject. The resulting time series of left and right auditory cortex activity were analyzed using the concept of mutual information. The analysis constitutes an objective method to address the nature of interhemispheric correlations in response to auditory stimulations. The results provide clear evidence of the occurrence of such correlations mediated by a direct information transport, with clear laterality effects: as a rule, the contralateral hemisphere leads by 10-20 ms, as can be seen in the average signal. The strength of the interhemispheric coupling, which cannot be extracted from the average data, is found to be highly variable from subject to subject, but remarkably stable for each subject.

Aerodynamics of dynamic wing flexion in translating wings

NASA Astrophysics Data System (ADS)

Liu, Yun; Cheng, Bo; Sane, Sanjay P.; Deng, Xinyan

2015-06-01

We conducted a systematic experimental study to investigate the aerodynamic effects of active trailing-edge flexion on a high-aspect-ratio wing translating from rest at a high angle of attack. We varied the timing and speed of the trailing-edge flexion and measured the resulting aerodynamic effects using a combination of direct force measurements and two-dimensional PIV flow measurements. The results indicated that the force and flow characteristics depend strongly on the timing of flexion, but relatively weakly on its speed. This is because the force and vortical flow structure are more sensitive to the timing of flexion relative to the shedding of starting vortex and leading-edge vortex. When the trailing-edge flexion occurred slightly before the starting vortex was shed, the lift production was greatly improved with the instantaneous peak lift increased by 54 % and averaged lift increased by 21 % compared with the pre-flexed case where the trailing-edge flexed before wing translation. However, when the trailing-edge flexed during or slightly after the leading-edge vortex shedding, the lift was significantly reduced by the disturbed development of leading-edge vortex. The force measurement results also imply that the trailing-edge flexion prior to wing translation does not augment lift but increases drag, thus resulting in a lower lift-drag ratio as compared to the case of flat wing.

Understanding the past to interpret the future: Comparison of simulated groundwater recharge in the upper Colorado River basin (USA) using observed and general-circulation-model historical climate data

USGS Publications Warehouse

Tillman, Fred D.; Gangopadhyay, Subhrendu; Pruitt, Tom

2017-01-01

In evaluating potential impacts of climate change on water resources, water managers seek to understand how future conditions may differ from the recent past. Studies of climate impacts on groundwater recharge often compare simulated recharge from future and historical time periods on an average monthly or overall average annual basis, or compare average recharge from future decades to that from a single recent decade. Baseline historical recharge estimates, which are compared with future conditions, are often from simulations using observed historical climate data. Comparison of average monthly results, average annual results, or even averaging over selected historical decades, may mask the true variability in historical results and lead to misinterpretation of future conditions. Comparison of future recharge results simulated using general circulation model (GCM) climate data to recharge results simulated using actual historical climate data may also result in an incomplete understanding of the likelihood of future changes. In this study, groundwater recharge is estimated in the upper Colorado River basin, USA, using a distributed-parameter soil-water balance groundwater recharge model for the period 1951–2010. Recharge simulations are performed using precipitation, maximum temperature, and minimum temperature data from observed climate data and from 97 CMIP5 (Coupled Model Intercomparison Project, phase 5) projections. Results indicate that average monthly and average annual simulated recharge are similar using observed and GCM climate data. However, 10-year moving-average recharge results show substantial differences between observed and simulated climate data, particularly during period 1970–2000, with much greater variability seen for results using observed climate data.

Lead exposure from food: the German LExUKon project.

PubMed

Schneider, Klaus; Schwarz, Markus A; Lindtner, Oliver; Blume, Katrin; Heinemeyer, Gerhard

2014-01-01

Lead is a highly toxic contaminant with food being the major source of exposure for the general public. The second German food consumption survey (Nationale Verzehrsstudie II - NVS II) with about 20 000 participants (15 371 for dietary history interviews used for this study) allowed for an updated exposure assessment for the German population. Based on these comprehensive data, information on consumption of 545 individual food items by the German population was generated. Lead concentrations in food were compiled from the German food monitoring programme, European countries' authority programmes and the published literature, covering the years from 2000 to 2009, and were multiplied with consumption data to obtain estimates of lead intake from food. Average lead concentrations per main food group were highest for meat (including offal), followed by fish (including seafood), vegetables and cereals. Due to high consumption, beverages contributed most to the intake of the general public, followed by main groups vegetables, fruits & nuts and cereals. Lead intake from food was estimated to be 0.53 and 0.72 µg kg(-1) bw and day for average and high-end consumers, respectively. This is close to (average consumers) respectively above (high-end consumers) a reference value derived from a recent health risk evaluation performed by EFSA, using the benchmark approach. Uncertainties in these estimates pertain to the influence of values below the limit of quantification and some foods not considered due to lacking occurrence data. In conclusion, the estimated lead intake of the German population from food is still close to health-based reference values. Further efforts to reduce lead intake are required.

Fast Deep Tracking via Semi-Online Domain Adaptation

NASA Astrophysics Data System (ADS)

Li, Xiaoping; Luo, Wenbing; Zhu, Yi; Li, Hanxi; Wang, Mingwen

2018-04-01

Deep tracking has been illustrating overwhelming superiorities over the shallow methods. Unfortunately, it also suffers from low FPS rates. To alleviate the problem, a number of real-time deep trackers have been proposed via removing the online updating procedure on the CNN model. However, the absent of the online update leads to a significant drop on tracking accuracy. In this work, we propose to perform the domain adaptation for visual tracking in two stages for transferring the information from the visual tracking domain and the instance domain respectively. In this way, the proposed visual tracker achieves comparable tracking accuracy to the state-of-the-art trackers and runs at real-time speed on an average consuming GPU.

Biomarker responses of Peromyscus leucopus exposed to lead and cadmium in the Southeast Missouri Lead Mining District

USGS Publications Warehouse

Beyer, W. Nelson; Casteel, Stan W.; Friedrichs, Kristen R.; Gramlich, Eric; Houseright, Ruth A.; Nichols, John W.; Karouna-Renier, Natalie; Kim, Dae Young; Rangen, Kathleen; Rattner, Barnett A.; Schultz, Sandra

2018-01-01

Biomarker responses and histopathological lesions have been documented in laboratory mammals exposed to elevated concentrations of lead and cadmium. The exposure of white-footed mice (Peromyscus leucopus) to these metals and the potential associated toxic effects were examined at three contaminated sites in the Southeast Missouri Lead Mining District and at a reference site in MO, USA. Mice from the contaminated sites showed evidence of oxidative stress and reduced activity of red blood cell δ-aminolevulinic acid dehydratase (ALAD). Histological examinations of the liver and kidney, cytologic examination of blood smears, and biomarkers of lipid peroxidation and DNA damage failed to show indications of toxic effects from lead. The biomagnification factor of cadmium (hepatic concentration/soil concentration) at a site with a strongly acid soil was 44 times the average of the biomagnification factors at two sites with slightly alkaline soils. The elevated concentrations of cadmium in the mice did not cause observable toxicity, but were associated with about a 50% decrease in expected tissue lead concentrations and greater ALAD activity compared to the activity at the reference site. Lead was associated with a decrease in concentrations of hepatic glutathione and thiols, whereas cadmium was associated with an increase. In addition, to support risk assessment efforts, we developed linear regression models relating both tissue lead dosages (based on a previously published a laboratory study) and tissue lead concentrations in Peromyscus to soil lead concentrations.

Biomarker responses of Peromyscus leucopus exposed to lead and cadmium in the Southeast Missouri Lead Mining District.

PubMed

Beyer, W Nelson; Casteel, Stan W; Friedrichs, Kristen R; Gramlich, Eric; Houseright, Ruth A; Nichols, John R; Karouna-Renier, Natalie K; Kim, Dae Young; Rangen, Kathleen L; Rattner, Barnett A; Schultz, Sandra L

2018-01-29

Biomarker responses and histopathological lesions have been documented in laboratory mammals exposed to elevated concentrations of lead and cadmium. The exposure of white-footed mice (Peromyscus leucopus) to these metals and the potential associated toxic effects were examined at three contaminated sites in the Southeast Missouri Lead Mining District and at a reference site in MO, USA. Mice from the contaminated sites showed evidence of oxidative stress and reduced activity of red blood cell δ-aminolevulinic acid dehydratase (ALAD). Histological examinations of the liver and kidney, cytologic examination of blood smears, and biomarkers of lipid peroxidation and DNA damage failed to show indications of toxic effects from lead. The biomagnification factor of cadmium (hepatic concentration/soil concentration) at a site with a strongly acid soil was 44 times the average of the biomagnification factors at two sites with slightly alkaline soils. The elevated concentrations of cadmium in the mice did not cause observable toxicity, but were associated with about a 50% decrease in expected tissue lead concentrations and greater ALAD activity compared to the activity at the reference site. Lead was associated with a decrease in concentrations of hepatic glutathione and thiols, whereas cadmium was associated with an increase. In addition, to support risk assessment efforts, we developed linear regression models relating both tissue lead dosages (based on a previously published a laboratory study) and tissue lead concentrations in Peromyscus to soil lead concentrations.

Seasonal prediction of Indian summer monsoon rainfall in NCEP CFSv2: forecast and predictability error

NASA Astrophysics Data System (ADS)

Pokhrel, Samir; Saha, Subodh Kumar; Dhakate, Ashish; Rahman, Hasibur; Chaudhari, Hemantkumar S.; Salunke, Kiran; Hazra, Anupam; Sujith, K.; Sikka, D. R.

2016-04-01

A detailed analysis of sensitivity to the initial condition for the simulation of the Indian summer monsoon using retrospective forecast by the latest version of the Climate Forecast System version-2 (CFSv2) is carried out. This study primarily focuses on the tropical region of Indian and Pacific Ocean basin, with special emphasis on the Indian land region. The simulated seasonal mean and the inter-annual standard deviations of rainfall, upper and lower level atmospheric circulations and Sea Surface Temperature (SST) tend to be more skillful as the lead forecast time decreases (5 month lead to 0 month lead time i.e. L5-L0). In general spatial correlation (bias) increases (decreases) as forecast lead time decreases. This is further substantiated by their averaged value over the selected study regions over the Indian and Pacific Ocean basins. The tendency of increase (decrease) of model bias with increasing (decreasing) forecast lead time also indicates the dynamical drift of the model. Large scale lower level circulation (850 hPa) shows enhancement of anomalous westerlies (easterlies) over the tropical region of the Indian Ocean (Western Pacific Ocean), which indicates the enhancement of model error with the decrease in lead time. At the upper level circulation (200 hPa) biases in both tropical easterly jet and subtropical westerlies jet tend to decrease as the lead time decreases. Despite enhancement of the prediction skill, mean SST bias seems to be insensitive to the initialization. All these biases are significant and together they make CFSv2 vulnerable to seasonal uncertainties in all the lead times. Overall the zeroth lead (L0) seems to have the best skill, however, in case of Indian summer monsoon rainfall (ISMR), the 3 month lead forecast time (L3) has the maximum ISMR prediction skill. This is valid using different independent datasets, wherein these maximum skill scores are 0.64, 0.42 and 0.57 with respect to the Global Precipitation Climatology Project, CPC Merged Analysis of Precipitation and the India Meteorological Department precipitation dataset respectively for L3. Despite significant El-Niño Southern Oscillation (ENSO) spring predictability barrier at L3, the ISMR skill score is highest at L3. Further, large scale zonal wind shear (Webster-Yang index) and SST over Niño3.4 region is best at L1 and L0. This implies that predictability aspect of ISMR is controlled by factors other than ENSO and Indian Ocean Dipole. Also, the model error (forecast error) outruns the error acquired by the inadequacies in the initial conditions (predictability error). Thus model deficiency is having more serious consequences as compared to the initial condition error for the seasonal forecast. All the model parameters show the increase in the predictability error as the lead decreases over the equatorial eastern Pacific basin and peaks at L2, then it further decreases. The dynamical consistency of both the forecast and the predictability error among all the variables indicates that these biases are purely systematic in nature and improvement of the physical processes in the CFSv2 may enhance the overall predictability.

Assessment of Lead Exposure Risk in Locksmiths

PubMed Central

Kondrashov, Vladislav; McQuirter, Joseph L.; Miller, Melba; Rothenberg, Stephen J.

2005-01-01

Exposure to lead has been well recognized in a number of work environments, but little is known about lead exposure associated with machining brass keys containing lead. The brass that is widely used for key manufacturing usually contains 1.5% – 2.5 % of lead. Six (6) licensed locksmiths and 6 case-matched controls successfully completed the pilot study to assess the prevalence of increased body lead burden of professional locksmiths. We measured both Blood Lead (atomic absorption spectrometry), bone-lead (KXRF) and had each subject complete a health and lead exposure risk questionnaire. One locksmith had not cut keys during the past two years, therefore this subject and case-matched control was excluded from the blood lead analysis only. The average blood-lead concentration (±SEM) for the 5 paired subjects was 3.1 (± 0.4) μg/dL and 2.2 (± 0.3) μg /dL for controls. Bone measurements, including all 6 paired subjects, showed tibia lead concentration (±SEM) for locksmiths and controls was 27.8 (± 2.3) μg /g and 13.7 (± 3.3) μg /g, respectively; average calcaneus lead concentration for locksmiths and controls was 31.9 (± 3.7) μg /g and 22.6 (± 4.1) μg /g, respectively: The t-test shows a significantly higher tibia lead (p<0.05) and blood lead (p<0.05) for locksmiths than for their matched controls, but no significant difference for calcaneus lead (p>0.10). Given that the mean tibia bone lead concentration was 13.1μg/g higher in locksmiths than in their matched controls, this average difference in the two groups would translate to an OR of increased hypertension in locksmiths of between 1.1 and 2.3, based on the published literature. Even with the very small number of subjects participating in this pilot study, we were able to demonstrate that locksmiths had significantly higher current exposure to lead (blood lead concentration) and significantly higher past exposure to lead (tibia lead concentration) than their age, sex and ethnically matched controls. Additional research is needed to fully identify the prevalence and associated risk factors for occupational exposure of lead in this previously understudied profession. PMID:16705814

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

Analysis of the time-varying energy of brain responses to an oddball paradigm using short-term smoothed Wigner-Ville distribution.

PubMed

Tağluk, M E; Cakmak, E D; Karakaş, S

2005-04-30

Cognitive brain responses to external stimuli, as measured by event related potentials (ERPs), have been analyzed from a variety of perspectives to investigate brain dynamics. Here, the brain responses of healthy subjects to auditory oddball paradigms, standard and deviant stimuli, recorded on an Fz electrode site were studied using a short-term version of the smoothed Wigner-Ville distribution (STSW) method. A smoothing kernel was designed to preserve the auto energy of the signal with maximum time and frequency resolutions. Analysis was conducted mainly on the time-frequency distributions (TFDs) of sweeps recorded during successive trials including the TFD of averaged single sweeps as the evoked time-frequency (ETF) brain response and the average of TFDs of single sweeps as the time-frequency (TF) brain response. Also the power entropy and the phase angles of the signal at frequency f and time t locked to the stimulus onset were studied across single trials as the TF power-locked and the TF phase-locked brain responses, respectively. TFDs represented in this way demonstrated the ERP spectro-temporal characteristics from multiple perspectives. The time-varying energy of the individual components manifested interesting TF structures in the form of amplitude modulated (AM) and frequency modulated (FM) energy bursts. The TF power-locked and phase-locked brain responses provoked ERP energies in a manner modulated by cognitive functions, an observation requiring further investigation. These results may lead to a better understanding of integrative brain dynamics.

Tide Gauge Records Reveal Improved Processing of Gravity Recovery and Climate Experiment Time-Variable Mass Solutions over the Coastal Ocean

NASA Astrophysics Data System (ADS)

Piecuch, Christopher G.; Landerer, Felix W.; Ponte, Rui M.

2018-05-01

Monthly ocean bottom pressure solutions from the Gravity Recovery and Climate Experiment (GRACE), derived using surface spherical cap mass concentration (MC) blocks and spherical harmonics (SH) basis functions, are compared to tide gauge (TG) monthly averaged sea level data over 2003-2015 to evaluate improved gravimetric data processing methods near the coast. MC solutions can explain ≳ 42% of the monthly variance in TG time series over broad shelf regions and in semi-enclosed marginal seas. MC solutions also generally explain ˜5-32 % more TG data variance than SH estimates. Applying a coastline resolution improvement algorithm in the GRACE data processing leads to ˜ 31% more variance in TG records explained by the MC solution on average compared to not using this algorithm. Synthetic observations sampled from an ocean general circulation model exhibit similar patterns of correspondence between modeled TG and MC time series and differences between MC and SH time series in terms of their relationship with TG time series, suggesting that observational results here are generally consistent with expectations from ocean dynamics. This work demonstrates the improved quality of recent MC solutions compared to earlier SH estimates over the coastal ocean, and suggests that the MC solutions could be a useful tool for understanding contemporary coastal sea level variability and change.

Role of "the frame cycle time" in portal dose imaging using an aS500-II EPID.

PubMed

Al Kattar Elbalaa, Zeina; Foulquier, Jean Noel; Orthuon, Alexandre; Elbalaa, Hanna; Touboul, Emmanuel

2009-09-01

This paper evaluates the role of an acquisition parameter, the frame cycle time "FCT", in the performance of an aS500-II EPID. The work presented rests on the study of the Varian EPID aS500-II and the image acquisition system 3 (IAS3). We are interested in integrated acquisition using asynchronous mode. For better understanding the image acquisition operation, we investigated the influence of the "frame cycle time" on the speed of acquisition, the pixel value of the averaged gray-scale frame and the noise, using 6 and 15MV X-ray beams and dose rates of 1-6Gy/min on 2100 C/D Linacs. In the integrated mode not synchronized to beam pulses, only one parameter the frame cycle time "FCT" influences the pixel value. The pixel value of the averaged gray-scale frame is proportional to this parameter. When the FCT <55ms (speed of acquisition V(f/s)>18 frames/s), the speed of acquisition becomes unstable and leads to a fluctuation of the portal dose response. A timing instability and saturation are detected when the dose per frame exceeds 1.53MU/frame. Rules were deduced to avoid saturation and to optimize this dosimetric mode. The choice of the acquisition parameter is essential for the accurate portal dose imaging.

Significance of coupling device for vessel anastomosis in esophageal reconstruction.

PubMed

Watanabe, Y; Horiuchi, A; Yamamoto, Y; Kikkawa, H; Kusunose, H; Sugishita, H; Sato, K; Yoshida, M; Yukumi, S; Kawachi, K

2005-01-01

To prevent an anastomotic failure due to impaired blood supply, several trials have been performed such as preoperative ischemic conditioning by transarterial embolization of the left gastric, right gastric and splenic arteries or microvascular anastomosis. We assess the significance of an automatic anastomotic coupling device for vessel anastomosis, which we have continuously utilized, to simplify the task and shorten the anastomotic time since March 1999. 8 patients who underwent venous anastomosis by an automatic anastomotic coupling device were evaluated for the time of anastomosis, total ischemic time and outcomes. Venous anastomosis was completed within 5 minutes on average. Microscopic arterial anastomosis by hand took 35 minutes on average. For gastric tube reconstruction, venous anastomosis by an automatic coupling device took only 5 minutes. The top of the gastric tube showed congestion before venous anastomosis, but rapidly recovered from it after anastomosis. Postoperative endoscopic observation of the mucosal color of the replaced intestine or gastric tube was started 3 days after surgery and revealed no ischemia or congestion. The postoperative course was uneventful except one case suffering from pneumonia but leakage was not observed in any case. An automatic anastomotic coupling device can perform an easy and reliable vascular anastomosis for patients who undergo esophageal reconstruction. The device may shorten the operating time and consequently the ischemic time of the gastric tube or jejunal or colonic graft, which in turn may lead to a decrease of complications.

Characterization of traffic-related PM concentration distribution and fluctuation patterns in near-highway urban residential street canyons.

PubMed

Hahn, Intaek; Brixey, Laurie A; Wiener, Russell W; Henkle, Stacy W; Baldauf, Richard

2009-12-01

Analyses of outdoor traffic-related particulate matter (PM) concentration distribution and fluctuation patterns in urban street canyons within a microscale distance of less than 500 m from a highway source are presented as part of the results from the Brooklyn Traffic Real-Time Ambient Pollutant Penetration and Environmental Dispersion (B-TRAPPED) study. Various patterns of spatial and temporal changes in the street canyon PM concentrations were investigated using time-series data of real-time PM concentrations measured during multiple monitoring periods. Concurrent time-series data of local street canyon wind conditions and wind data from the John F. Kennedy (JFK) International Airport National Weather Service (NWS) were used to characterize the effects of various wind conditions on the behavior of street canyon PM concentrations.Our results suggest that wind direction may strongly influence time-averaged mean PM concentration distribution patterns in near-highway urban street canyons. The rooftop-level wind speeds were found to be strongly correlated with the PM concentration fluctuation intensities in the middle sections of the street blocks. The ambient turbulence generated by shifting local wind directions (angles) showed a good correlation with the PM concentration fluctuation intensities along the entire distance of the first and second street blocks only when the wind angle standard deviations were larger than 30 degrees. Within-canyon turbulent shearing, caused by fluctuating local street canyon wind speeds, showed no correlation with PM concentration fluctuation intensities. The time-averaged mean PM concentration distribution along the longitudinal distances of the street blocks when wind direction was mostly constantly parallel to the street was found to be similar to the distribution pattern for the entire monitoring period when wind direction fluctuated wildly. Finally, we showed that two different PM concentration metrics-time-averaged mean concentration and number of concentration peaks above a certain threshold level-can possibly lead to different assessments of spatial concentration distribution patterns.

MIS Single-position Lateral and Oblique Lateral Lumbar Interbody Fusion and Bilateral Pedicle Screw Fixation: Feasibility and Perioperative Results.

PubMed

Blizzard, Daniel J; Thomas, J Alex

2018-03-15

Retrospective review of prospectively collected data of the first 72 consecutive patients treated with single-position one- or two-level lateral (LLIF) or oblique lateral interbody fusion (OLLIF) with bilateral percutaneous pedicle screw and rod fixation by a single spine surgeon. To evaluate the clinical feasibility, accuracy, and efficiency of a single-position technique for LLIF and OLLIF with bilateral pedicle screw and rod fixation. Minimally-invasive lateral interbody approaches are performed in the lateral decubitus position. Subsequent repositioning prone for bilateral pedicle screw and rod fixation requires significant time and resources and does not facilitate increased lumbar lordosis. The first 72 consecutive patients (300 screws) treated with single-position LLIF or OLLIF and bilateral pedicle screws by a single surgeon between December 2013 and August 2016 were included in the study. Screw accuracy and fusion were graded using computed tomography and several timing parameters were recorded including retractor, fluoroscopy, and screw placement time. Complications including reoperation, infection, and postoperative radicular pain and weakness were recorded. Average screw placement time was 5.9 min/screw (standard deviation, SD: 1.5 min; range: 3-9.5 min). Average total operative time (interbody cage and pedicle screw placement) was 87.9 minutes (SD: 25.1 min; range: 49-195 min). Average fluoroscopy time was 15.0 s/screw (SD: 4.7 s; range: 6-25 s). The pedicle screw breach rate was 5.1% with 10/13 breaches measured as < 2 mm in magnitude. Fusion rate at 6-months postoperative was 87.5%. Two (2.8%) patients underwent reoperation for malpositioned pedicle screws with subsequent resolution of symptoms. The single-position, all-lateral technique was found to be feasible with accuracy, fluoroscopy usage, and complication rates comparable with the published literature. This technique eliminates the time and staffing associated with intraoperative repositioning and may lead to significant improvements in operative efficiency and cost savings. 4.

Time needed to board an airplane: a power law and the structure behind it.

PubMed

Frette, Vidar; Hemmer, Per C

2012-01-01

A simple model for the boarding of an airplane is studied. Passengers have reserved seats but enter the airplane in arbitrary order. Queues are formed along the aisle, as some passengers have to wait to reach the seats for which they have reservation. We label a passenger by the number of his or her reserved seat. In most cases the boarding process is much slower than for the optimal situation, where passenger and seat orders are identical. We study this dynamical system by calculating the average boarding time when all permutations of N passengers are given equal weight. To first order, the boarding time for a given permutation (ordering) of the passengers is given by the number s of sequences of monotonically increasing values in the permutation. We show that the distribution of s is symmetric on [1,N], which leads to an average boarding time (N+1)/2. We have found an exact expression for s and have shown that the full distribution of s approaches a normal distribution as N increases. However, there are significant corrections to the first-order results, due to certain correlations between passenger ordering and the substrate (seat ordering). This occurs for some cases in which the sequence of the seats is partially mirrored in the passenger ordering. These cases with correlations have a boarding time that is lower than predicted by the first-order results. The large number of cases with reduced boarding times have been classified. We also give some indicative results on the geometry of the correlations, with sorting into geometry groups. With increasing N, both the number of correlation types and the number of cases belonging to each type increase rapidly. Using enumeration we find that as a result of these correlations the average boarding time behaves like N(α), with α≃0.69, as compared with α=1.0 for the first-order approximation. © 2012 American Physical Society

Microbial activity, arbuscular mycorrhizal fungi and inoculation of woody plants in lead contaminated soil.

PubMed

Gattai, Graziella S; Pereira, Sônia V; Costa, Cynthia M C; Lima, Cláudia E P; Maia, Leonor C

2011-07-01

The goals of this study were to evaluate the microbial activity, arbuscular mycorrhizal fungi and inoculation of woody plants (Caesalpinia ferrea, Mimosa tenuiflora and Erythrina velutina) in lead contaminated soil from the semi-arid region of northeastern of Brazil (Belo Jardim, Pernambuco). Dilutions were prepared by adding lead contaminated soil (270 mg Kg(-1)) to uncontaminated soil (37 mg Pb Kg soil(-1)) in the proportions of 7.5%, 15%, and 30% (v:v). The increase of lead contamination in the soil negatively influenced the amount of carbon in the microbial biomass of the samples from both the dry and rainy seasons and the metabolic quotient only differed between the collection seasons in the 30% contaminated soil. The average value of the acid phosphatase activity in the dry season was 2.3 times higher than observed during the rainy season. There was no significant difference in the number of glomerospores observed between soils and periods studied. The most probable number of infective propagules was reduced for both seasons due to the excess lead in soil. The mycorrhizal colonization rate was reduced for the three plant species assayed. The inoculation with arbuscular mycorrhizal fungi benefited the growth of Erythrina velutina in lead contaminated soil.

Microbial activity, arbuscular mycorrhizal fungi and inoculation of woody plants in lead contaminated soil

PubMed Central

Gattai, Graziella S.; Pereira, Sônia V.; Costa, Cynthia M. C.; Lima, Cláudia E. P.; Maia, Leonor C.

2011-01-01

The goals of this study were to evaluate the microbial activity, arbuscular mycorrhizal fungi and inoculation of woody plants (Caesalpinia ferrea, Mimosa tenuiflora and Erythrina velutina) in lead contaminated soil from the semi-arid region of northeastern of Brazil (Belo Jardim, Pernambuco). Dilutions were prepared by adding lead contaminated soil (270 mg Kg-1) to uncontaminated soil (37 mg Pb Kg soil-1) in the proportions of 7.5%, 15%, and 30% (v:v). The increase of lead contamination in the soil negatively influenced the amount of carbon in the microbial biomass of the samples from both the dry and rainy seasons and the metabolic quotient only differed between the collection seasons in the 30% contaminated soil. The average value of the acid phosphatase activity in the dry season was 2.3 times higher than observed during the rainy season. There was no significant difference in the number of glomerospores observed between soils and periods studied. The most probable number of infective propagules was reduced for both seasons due to the excess lead in soil. The mycorrhizal colonization rate was reduced for the three plant species assayed. The inoculation with arbuscular mycorrhizal fungi benefited the growth of Erythrina velutina in lead contaminated soil. PMID:24031701

Bone Balance within a Cortical BMU: Local Controls of Bone Resorption and Formation

PubMed Central

Smith, David W.; Gardiner, Bruce S.; Dunstan, Colin

2012-01-01

Maintaining bone volume during bone turnover by a BMU is known as bone balance. Balance is required to maintain structural integrity of the bone and is often dysregulated in disease. Consequently, understanding how a BMU controls bone balance is of considerable interest. This paper develops a methodology for identifying potential balance controls within a single cortical BMU. The theoretical framework developed offers the possibility of a directed search for biological processes compatible with the constraints of balance control. We first derive general control constraint equations and then introduce constitutive equations to identify potential control processes that link key variables that describe the state of the BMU. The paper describes specific local bone volume balance controls that may be associated with bone resorption and bone formation. Because bone resorption and formation both involve averaging over time, short-term fluctuations in the environment are removed, leaving the control systems to manage deviations in longer-term trends back towards their desired values. The length of time for averaging is much greater for bone formation than for bone resorption, which enables more filtering of variability in the bone formation environment. Remarkably, the duration for averaging of bone formation may also grow to control deviations in long-term trends of bone formation. Providing there is sufficient bone formation capacity by osteoblasts, this leads to an extraordinarily robust control mechanism that is independent of either osteoblast number or the cellular osteoid formation rate. A complex picture begins to emerge for the control of bone volume. Different control relationships may achieve the same objective, and the ‘integration of information’ occurring within a BMU may be interpreted as different sets of BMU control systems coming to the fore as different information is supplied to the BMU, which in turn leads to different observable BMU behaviors. PMID:22844401

Long-term particulate matter modeling for health effects studies in California - Part 1: Model performance on temporal and spatial variations

NASA Astrophysics Data System (ADS)

Hu, J.; Zhang, H.; Ying, Q.; Chen, S.-H.; Vandenberghe, F.; Kleeman, M. J.

2014-08-01

For the first time, a decadal (9 years from 2000 to 2008) air quality model simulation with 4 km horizontal resolution and daily time resolution has been conducted in California to provide air quality data for health effects studies. Model predictions are compared to measurements to evaluate the accuracy of the simulation with an emphasis on spatial and temporal variations that could be used in epidemiology studies. Better model performance is found at longer averaging times, suggesting that model results with averaging times ≥ 1 month should be the first to be considered in epidemiological studies. The UCD/CIT model predicts spatial and temporal variations in the concentrations of O3, PM2.5, EC, OC, nitrate, and ammonium that meet standard modeling performance criteria when compared to monthly-averaged measurements. Predicted sulfate concentrations do not meet target performance metrics due to missing sulfur sources in the emissions. Predicted seasonal and annual variations of PM2.5, EC, OC, nitrate, and ammonium have mean fractional biases that meet the model performance criteria in 95%, 100%, 71%, 73%, and 92% of the simulated months, respectively. The base dataset provides an improvement for predicted population exposure to PM concentrations in California compared to exposures estimated by central site monitors operated one day out of every 3 days at a few urban locations. Uncertainties in the model predictions arise from several issues. Incomplete understanding of secondary organic aerosol formation mechanisms leads to OC bias in the model results in summertime but does not affect OC predictions in winter when concentrations are typically highest. The CO and NO (species dominated by mobile emissions) results reveal temporal and spatial uncertainties associated with the mobile emissions generated by the EMFAC 2007 model. The WRF model tends to over-predict wind speed during stagnation events, leading to under-predictions of high PM concentrations, usually in winter months. The WRF model also generally under-predicts relative humidity, resulting in less particulate nitrate formation especially during winter months. These issues will be improved in future studies. All model results included in the current manuscript can be downloaded free of charge at http://faculty.engineering.ucdavis.edu/kleeman/.

Long-term particulate matter modeling for health effect studies in California - Part 1: Model performance on temporal and spatial variations

NASA Astrophysics Data System (ADS)

Hu, J.; Zhang, H.; Ying, Q.; Chen, S.-H.; Vandenberghe, F.; Kleeman, M. J.

2015-03-01

For the first time, a ~ decadal (9 years from 2000 to 2008) air quality model simulation with 4 km horizontal resolution over populated regions and daily time resolution has been conducted for California to provide air quality data for health effect studies. Model predictions are compared to measurements to evaluate the accuracy of the simulation with an emphasis on spatial and temporal variations that could be used in epidemiology studies. Better model performance is found at longer averaging times, suggesting that model results with averaging times ≥ 1 month should be the first to be considered in epidemiological studies. The UCD/CIT model predicts spatial and temporal variations in the concentrations of O3, PM2.5, elemental carbon (EC), organic carbon (OC), nitrate, and ammonium that meet standard modeling performance criteria when compared to monthly-averaged measurements. Predicted sulfate concentrations do not meet target performance metrics due to missing sulfur sources in the emissions. Predicted seasonal and annual variations of PM2.5, EC, OC, nitrate, and ammonium have mean fractional biases that meet the model performance criteria in 95, 100, 71, 73, and 92% of the simulated months, respectively. The base data set provides an improvement for predicted population exposure to PM concentrations in California compared to exposures estimated by central site monitors operated 1 day out of every 3 days at a few urban locations. Uncertainties in the model predictions arise from several issues. Incomplete understanding of secondary organic aerosol formation mechanisms leads to OC bias in the model results in summertime but does not affect OC predictions in winter when concentrations are typically highest. The CO and NO (species dominated by mobile emissions) results reveal temporal and spatial uncertainties associated with the mobile emissions generated by the EMFAC 2007 model. The WRF model tends to overpredict wind speed during stagnation events, leading to underpredictions of high PM concentrations, usually in winter months. The WRF model also generally underpredicts relative humidity, resulting in less particulate nitrate formation, especially during winter months. These limitations must be recognized when using data in health studies. All model results included in the current manuscript can be downloaded free of charge at http://faculty.engineering.ucdavis.edu/kleeman/ .

Reply to comment by Ma and Zhang on "Rescaling the complementary relationship for land surface evaporation"

NASA Astrophysics Data System (ADS)

Crago, Richard; Qualls, Russell; Szilagyi, Jozsef; Huntington, Justin

2017-07-01

Ma and Zhang (2017) note a concern they have with our rescaled Complementary Relationship (CR) for land surface evaporation when daily average wind speeds are very low (perhaps less than 1 m/s). We discuss conditions and specific formulations that lead to this concern, but ultimately argue that under these conditions, a key assumption behind the CR itself may not be satisfied at the daily time scale. Thus, careful consideration of the reliability of the CR is needed when wind speeds are very low.

Cooper pair tunnelling and quasiparticle poisoning in a galvanically isolated superconducting double dot

NASA Astrophysics Data System (ADS)

Esmail, A. A.; Ferguson, A. J.; Lambert, N. J.

2017-12-01

We increase the isolation of a superconducting double dot from its environment by galvanically isolating it from any electrodes. We probe it using high frequency reflectometry techniques, find 2e-periodic behaviour, and characterise the energy structure of its charge states. By modelling the response of the device, we determine the time averaged probability that the device is poisoned by quasiparticles, and by comparing this with previous work, we conclude that quasiparticle exchange between the dots and the leads is an important relaxation mechanism.

The electromagnetic pendulum in quickly changing magnetic field of constant intensity

NASA Astrophysics Data System (ADS)

Rodyukov, F. F.; Shepeljavyi, A. I.

2018-05-01

The Lagrange-Maxwell equations for the pendulum in the form of a conductive frame, which is suspended in a uniform sinusoidal electromagnetic field of constant intensity, are obtained. The procedure for obtaining simplified mathematical models by a traditional method of separating fast and slow motions with subsiquent averaging a fast time is used. It is shown that this traditional approach may lead to inappropriate mathematical models. Suggested ways on how this can be avoided for the case are considered. The main statements by numerical experiments are illustrated.

An Attempt to Measure the Traffic Impact of Airline Alliances

NASA Technical Reports Server (NTRS)

Iatrou, Kostas; Skourias, Nikolaos

2005-01-01

This paper analyzes the effects of airline alliances on the allied partners output by comparing the traffic change observed between the pre- and the post-alliance period. First, a simple methodology based on traffic passenger modelling is developed, and then an empirical analysis is conducted using time series from four global strategic alliances (Wings, Star Alliance, oneworld and SkyTeam) and 124 alliance routes. The analysis concludes that, all other things being equal, strategic alliances do lead to a 9.4%, on average, improvement in passenger volume.

Proceedings of the U.S. Air Force and The Federal Republic of Germany Data Exchange Agreement Meeting (9th), Viscous and Interacting Flow Field Effects Held at Silver Spring, Maryland on 9-10 May 1984,

DTIC Science & Technology

1984-08-01

found in References 1-3. 2. Modeling of Roughness Effects on Turbulent Flow In turbulent flow analysis , use of time-averaged equations leads to the...eddy viscosity and the mixing length which are important parameters used in current algebraic modeling of the turbulence shear term. Two different ...surfaces with three-dimensional (distributed) roughness elements. Calculations using the present model have been compared with experimental data from

Trapping saturation of the bump-on-tail instability and electrostatic harmonic excitation in earth's foreshock

NASA Technical Reports Server (NTRS)

Klimas, Alexander J.

1990-01-01

The Vlasov simulation is used to examine the trapping saturation of the bump-on-tail instability both with and without mode-mode coupling and subsequent harmonic excitation. It is found that adding the pumped harmonic modes leads to a significant difference in the behavior of the phase-space distribution function near the unstable bump at the saturation time of the instability. The pumped modes permit rapid plateau formation on the space-averaged velocity distribution, in effect preventing the onset of the quasi-linear velocity-diffusion saturation mechanism.

Eye movements during visual search in patients with glaucoma

PubMed Central

2012-01-01

Background Glaucoma has been shown to lead to disability in many daily tasks including visual search. This study aims to determine whether the saccadic eye movements of people with glaucoma differ from those of people with normal vision, and to investigate the association between eye movements and impaired visual search. Methods Forty patients (mean age: 67 [SD: 9] years) with a range of glaucomatous visual field (VF) defects in both eyes (mean best eye mean deviation [MD]: –5.9 (SD: 5.4) dB) and 40 age-related people with normal vision (mean age: 66 [SD: 10] years) were timed as they searched for a series of target objects in computer displayed photographs of real world scenes. Eye movements were simultaneously recorded using an eye tracker. Average number of saccades per second, average saccade amplitude and average search duration across trials were recorded. These response variables were compared with measurements of VF and contrast sensitivity. Results The average rate of saccades made by the patient group was significantly smaller than the number made by controls during the visual search task (P = 0.02; mean reduction of 5.6% (95% CI: 0.1 to 10.4%). There was no difference in average saccade amplitude between the patients and the controls (P = 0.09). Average number of saccades was weakly correlated with aspects of visual function, with patients with worse contrast sensitivity (PR logCS; Spearman’s rho: 0.42; P = 0.006) and more severe VF defects (best eye MD; Spearman’s rho: 0.34; P = 0.037) tending to make less eye movements during the task. Average detection time in the search task was associated with the average rate of saccades in the patient group (Spearman’s rho = −0.65; P < 0.001) but this was not apparent in the controls. Conclusions The average rate of saccades made during visual search by this group of patients was fewer than those made by people with normal vision of a similar average age. There was wide variability in saccade rate in the patients but there was an association between an increase in this measure and better performance in the search task. Assessment of eye movements in individuals with glaucoma might provide insight into the functional deficits of the disease. PMID:22937814

Massively parallel free-flight simulations of a passive bumblebee in turbulence

NASA Astrophysics Data System (ADS)

Engels, Thomas; Kolomenskiy, Dmitry; Schneider, Kai; Farge, Marie; Lehmann, Fritz; Sesterhenn, Jörn

2017-11-01

High-resolution direct numerical simulations of a flapping bumblebee in fully developed turbulence are presented. The model insect is considered in free flight with all six degrees of coupled to the fluid solver. We study the influence of inflow turbulence with varying intensity on the passive response of the animal. The passive response is relevant for insects due to the finite reaction time after which changes in orientation are transduced into changes in the wingbeat kinematics. The impact on the cycle-averaged aerodynamical forces, moments and power consumption is assessed. We also analyze the leading edge vortex at the insect wings, which enhances lift production, and show that even strong inflow turbulence is insignificant for its flow topology in an ensemble-averaged sense. Orthogonal wavelet decomposition quantifies the scale dependence of the generated swirling flow and its intermittency. Financial support from the ANR (Grant 15-CE40-0019) and DFG (Grant SE 8246-1), project AIFIT, is gratefully acknowledged and CPU time from the supercomputer center Idris in Orsay, project i20152a1664.

Operative Treatment of Traumatic Hallux Valgus in Elite Athletes.

PubMed

Covell, D Jeff; Lareau, Craig R; Anderson, Robert B

2017-06-01

Traumatic hallux valgus is an increasingly common injury in the athletic population and represents a unique variant of turf toe. Failure to appropriately recognize and treat these injuries can lead to continued pain, decreased performance, progressive deformities, and ultimately degeneration of the hallux metatarsophalangeal joint. Limited literature currently exists to assist in the diagnosis, management, and operative treatment. Nineteen patients were reviewed in this series, including 12 National Football League, 6 college, and 1 high school player who was a college prospect. The average age for all patients at the time of surgery was 24.4 years (range, 19-33 years). Return to play and complications were evaluated. Overall, good operative results were obtained, with 74% of patients returning to their preinjury level of play at an average recovery time of 3.4 months. Traumatic hallux valgus is an increasingly common injury in the athletic population and represents a unique variant of turf toe. The impact of this injury cannot be overstated, as one-quarter of players were unable to return to play. Level IV, case series.

Scheduling periodic jobs that allow imprecise results

NASA Technical Reports Server (NTRS)

Chung, Jen-Yao; Liu, Jane W. S.; Lin, Kwei-Jay

1990-01-01

The problem of scheduling periodic jobs in hard real-time systems that support imprecise computations is discussed. Two workload models of imprecise computations are presented. These models differ from traditional models in that a task may be terminated any time after it has produced an acceptable result. Each task is logically decomposed into a mandatory part followed by an optional part. In a feasible schedule, the mandatory part of every task is completed before the deadline of the task. The optional part refines the result produced by the mandatory part to reduce the error in the result. Applications are classified as type N and type C, according to undesirable effects of errors. The two workload models characterize the two types of applications. The optional parts of the tasks in an N job need not ever be completed. The resulting quality of each type-N job is measured in terms of the average error in the results over several consecutive periods. A class of preemptive, priority-driven algorithms that leads to feasible schedules with small average error is described and evaluated.

The effect of Argon pressure dependent V thin film on the phase transition process of (020) VO2 thin film

NASA Astrophysics Data System (ADS)

Meng, Yifan; Huang, Kang; Tang, Zhou; Xu, Xiaofeng; Tan, Zhiyong; Liu, Qian; Wang, Chunrui; Wu, Binhe; Wang, Chang; Cao, Juncheng

2018-01-01

It has been proved challenging to fabricate the single crystal orientation of VO2 thin film by a simple method. Based on chemical reaction thermodynamic and crystallization analysis theory, combined with our experimental results, we find out that when stoichiometric number of metallic V in the chemical equation is the same, the ratio of metallic V thin film surface average roughness Ra to thin film average particle diameter d decreases with the decreasing sputtering Argon pressure. Meanwhile, the oxidation reaction equilibrium constant K also decreases, which will lead to the increases of oxidation time, thereby the crystal orientation of the VO2 thin film will also become more uniform. By sputtering oxidation coupling method, metallic V thin film is deposited on c-sapphire substrate at 1 × 10-1 Pa, and then oxidized in the air with the maximum oxidation time of 65s, high oriented (020) VO2 thin film has been fabricated successfully, which exhibits ∼4.6 orders sheet resistance change across the metal-insulator transition.

The role of health system factors in delaying final diagnosis and treatment of breast cancer in Mexico City, Mexico.

PubMed

Bright, Kristin; Barghash, Maya; Donach, Martin; de la Barrera, Marcos Gutiérrez; Schneider, Robert J; Formenti, Silvia C

2011-04-01

In Mexico, breast cancer is the leading cancer-related death among women and most cases are diagnosed at advanced stages (50-60%). We hypothesized health system factors could be partly responsible for this delay and performed a prospective review of 166 new breast cases at a major public hospital in Mexico City. Our analysis confirmed the prevalence of locally advanced and metastatic disease (47% of patients). A subset analysis of 32 women with confirmed stage I-IIIC breast cancer found an average time interval of 1.8 months from symptom onset to first primary care consultation (PCC), with an additional 6.6 months from first PCC to confirmed diagnosis, and 0.6 months from diagnosis to treatment initiation. Patients underwent an average of 7.9 clinic visits before confirmed diagnosis. Findings suggest that protracted referral time from primary to specialty care accounts for the bulk of delay, with earlier stage patients experiencing longer delays. These findings reveal a critical need for further study and exploration of interventions. Copyright © 2011 Elsevier Ltd. All rights reserved.

Low temperature synthesis & characterization of lead-free BCZT ceramics using molten salt method

NASA Astrophysics Data System (ADS)

Jai Shree, K.; Chandrakala, E.; Das, Dibakar

2018-04-01

Piezoelectric properties are greatly influenced by the synthesis route, microstructure, stoichiometry of the chemical composition, purity of the starting materials. In this study, molten salt method was used to prepare lead-free BCZT ceramics. Molten salt method is one of the simplestmethods to prepare chemically-purified, single phase powders in high yield often at lower temperatures and shorten reaction time. Calcination of the molten salt synthesized powders resulted in asingle-phase perovskite structure at 1000 °C which is ˜ 350 °C less than the conventional solid-sate reaction method. With increasing calcination temperature the average template size was increased (˜ 0.5-2 µm). Formation of well dispersive templates improves the sinterability at lower temperatures. Lead-free BCZT ceramics sintered at 1500 °C for 2 h resulted in homogenous and highly dense microstructure with ˜92% of the theoretical density and a grain size of ˜ 35 µm. This highly dense microstructure could enhance the piezoelectric properties of the system.

Comparison of a wipe method with and without a rinse to recover wall losses in closed face 37-mm cassettes used for sampling lead dust particulates

PubMed Central

Ceballos, Diana; King, Bradley; Beaucham, Catherine; Brueck, Scott E.

2015-01-01

Closed-face 37-millimeter (mm) polystyrene cassettes are often used for exposure monitoring of metal particulates. Several methods have been proposed to account for the wall loss in air sampling cassettes, including rinsing, wiping, within-cassette dissolution, and an internal capsule fused to the filter that could be digested with the filter. Until internal capsules replace filters, other methods for assessing wall losses may be considered. To determine if rinsing and wiping or wiping alone is adequate to determine wall losses on cassettes, we collected 54 full-shift area air samples at a battery recycling facility. We collected six replicate samples at three locations within the facility for 3 consecutive days. The wall losses of three replicate cassettes from each day-location were analyzed following a rinse and two consecutive wipes. The wall losses of the other three replicates from each day-location were analyzed following two consecutive wipes only. Mixed-cellulose ester membrane filter, rinse, and wipes were analyzed separately following NIOSH Method 7303. We found an average of 29% (range: 8%–54%) recovered lead from the cassette walls for all samples. We also found that rinsing prior to wiping the interior cassette walls did not substantially improve recovery of wall losses compared to wiping alone. A rinse plus one wipe recovered on average 23% (range: 13%–33%) of the lead, while one wipe alone recovered on average 21% (range: 16%–22%). Similarly we determined that a second wipe did not provide substantial additional recovery of lead (average: 4%, range: 0.4%–19%) compared to the first wipe disregarding the rinse (average: 18%, range: 4%–39%). We concluded that when an internal capsule is not used, wall losses of lead dust in air sampling cassettes can be adequately recovered by wiping the internal wall surfaces of the cassette with a single wipe. PMID:26125330

Diffusion in random networks: Asymptotic properties, and numerical and engineering approximations

NASA Astrophysics Data System (ADS)

Padrino, Juan C.; Zhang, Duan Z.

2016-11-01

The ensemble phase averaging technique is applied to model mass transport by diffusion in random networks. The system consists of an ensemble of random networks, where each network is made of a set of pockets connected by tortuous channels. Inside a channel, we assume that fluid transport is governed by the one-dimensional diffusion equation. Mass balance leads to an integro-differential equation for the pores mass density. The so-called dual porosity model is found to be equivalent to the leading order approximation of the integration kernel when the diffusion time scale inside the channels is small compared to the macroscopic time scale. As a test problem, we consider the one-dimensional mass diffusion in a semi-infinite domain, whose solution is sought numerically. Because of the required time to establish the linear concentration profile inside a channel, for early times the similarity variable is xt- 1 / 4 rather than xt- 1 / 2 as in the traditional theory. This early time sub-diffusive similarity can be explained by random walk theory through the network. In addition, by applying concepts of fractional calculus, we show that, for small time, the governing equation reduces to a fractional diffusion equation with known solution. We recast this solution in terms of special functions easier to compute. Comparison of the numerical and exact solutions shows excellent agreement.

Green supply chain: Simulating road traffic congestion

NASA Astrophysics Data System (ADS)

Jalal, Muhammad Zulqarnain Hakim Abd; Nawawi, Mohd Kamal Mohd; Laailatul Hanim Mat Desa, Wan; Khalid, Ruzelan; Khalid Abduljabbar, Waleed; Ramli, Razamin

2017-09-01

With the increasing awareness of the consumers about environmental issues, businesses, households and governments increasingly want use green products and services which lead to green supply chain. This paper discusses a simulation study of a selected road traffic system that will contribute to the air pollution if in the congestion state. Road traffic congestion (RTC) can be caused by a temporary obstruction, a permanent capacity bottleneck in the network itself, and stochastic fluctuation in demand within a particular sector of the network, leading to spillback and queue propagation. A discrete-event simulation model is developed to represent the real traffic light control (TLC) system condition during peak hours. Certain performance measures such as average waiting time and queue length were measured using the simulation model. Existing system uses pre-set cycle time to control the light changes which is fixed time cycle. In this research, we test several other combination of pre-set cycle time with the objective to find the best system. In addition, we plan to use a combination of the pre-set cycle time and a proximity sensor which have the authority to manipulate the cycle time of the lights. The sensors work in such situation when the street seems to have less occupied vehicles, obviously it may not need a normal cycle for green light, and automatically change the cycle to street where vehicle is present.

[Papillary muscle rupture complicating acute myocardial infarction--treatment with mitral valve replacement and coronary bypass surgery in acute phase].

PubMed

Kyo, S; Miyamoto, N; Yokote, Y; Ueda, K; Takamoto, S; Omoto, R

1996-06-01

Complete rupture of a papillary muscle following acute myocardial infarction is a severe complication that is typically associated with acute left ventricular failure, pulmonary edema, and relentless clinical deterioration. The reported mortality rates without surgical intervention is almost 90%, therefore, prompt operation without prolonged attempts at medical stabilization is the key to decrease operative mortality. Although the complete coronary revascularization in conjunction with mitral valve replacement is advocated in the western medical academic society, there is only a few case of conjunct surgery has been reported in Japan. Three successful cases of conjunct surgery of mitral valve replacement and coronary complete revascularization in acute phase within one week from the onset of acute myocardial infarction (AMI) are described. There were one male and two female patients with an average age of 60-year-old (range 48-67), who developed cardiogenic shock and admitted to our hospital. The average interval between onset of AMI and the appearance of mitral regurgitation (MR) was 38 hours, and that of the appearance of MR and admission was 40 hours. Surgeries were performed within 26 hours (average 13 hours) after admission. The mitral valve was replaced with a mechanical valve (St. Jude Medical Valve) and a complete coronary revasculatization was done using saphenous vein graft. The average period of operation time and aortic cross clamping time were 6 hours 22 minutes and 109 minutes respectively. The average number of coronary grafting was 2.3 (range 1-3). Postoperative recovery from cardiogenic shock was uneventful in all three patients. The average periods of ICU stay and hospital stay were 5 days and 43 days respectively. All patients have regained their social activities with mean follow up period of 52 months. Since ischemic heart disease remains the leading cause of death in such patients, it is suggested that complete coronary revascularization should be performed immediately in conjunction with valve replacement even in the acute phase after onset of AMI.

Evolution of anomalies of salinity of surface waters of Arctic Ocean and their possible influence on climate changes

NASA Astrophysics Data System (ADS)

Popov, A.; Rubchenia, A.

2009-04-01

Numerous of model simulations of ice extent in Arctic Ocean predict almost full disappearance of sea ice in Arctic regions by 2050. However, the nature, as against models, does not suffer the unidirectional processes. By means of various feedback responses system aspires to come in an equilibrium condition. In Arctic regions one of the most powerful generators of a negative feedback is the fresh-water stream to Greenland Sea and Northern Atlantic. Increasing or decreasing of a fresh-water volume from the Arctic basin to Greenland Sea and Northern Atlantic results in significant changes in climatic system. At the Oceanology department of Arctic and Antarctic Research Institute (AARI) (St-Petersburg, Russia) in 2007, on the basis of the incorporated Russian-American database of the oceanographic data, reconstruction of long-term time series of average salinity of ocean surface was executed. The received time series describes the period from 1950 to 1993. For allocation of the processes determining formation of changes of average salinity of surface waters in Arctic basin the correlation analysis of interrelation of the received time series and several physical parameters which could affect formation of changes of salinity was executed. We found counter-intuitive result: formation of long-term changes of average salinity of surface waters of Arctic basin in the winter period does not depend on changes of a Siberian rivers runoff. Factors of correlation do not exceed -0,31. At the same time, clear inverse relationship of salinity of surface waters from volumes of the ice formed in flaw lead polynyas of the Siberian shelf seas is revealed. In this case factors of correlation change from -0,56 to -0,7. The maximum factor of correlation is -0,7. It characterizes interrelation of total volume of the ice formed in flaw lead polynyas of all seas of the Siberian shelf and average salinity of surface waters of Arctic basin. Thus, at increase of volumes of the ice formed in flaw lead polynyas there is a reduction of average salinity of surface waters of Arctic basin. In the winter period obvious influence of waters of a river runoff on a hydrological situation of this or that sea is limited to a zone of distribution of fast ice and a narrow zone of flaw lead polynyas between fast ice and drift ice. That fresh water from the Arctic seas is transferred in the Arctic basin. There should be a certain effective mechanism to carry it. Presence of clear interrelation of salinity of surface waters and volumes of ice formed in polynyas, allows us to offer the following circuit of formation of average salinity of surface waters in the Arctic basin. The ice formed in polynya, is constantly taken out for limits of an area of flaw lead polynyas. This ice accumulates the fresh water acting with a river runoff. New ice hummocking and accumulate snow - the next source of fresh water. In the summer period ice is melting and forms surface fresh layer. In the cold period of year, presence of thick ice not allows accumulating all fresh water, and the zone of fresh water is forming. These fresh water areas could exist for months. In the reports [1] was offered a hypothesis describing formation of distant connections in climatic system. In the hypothesis offered by us about a role of polynyas in formation of distant feedback in climatic system the most important and, unfortunately, the least certain parameter is «reaching time» of climatic signal from a place of origin (in flaw lead polynya area) up to the Greenland sea and Northern Atlantic. For an estimation of reaching time» we tried to trace drift of this anomaly from polynyas to Greenland Sea. For the initial moment of anomaly genesis month of the maximal development of polynya (when ice production of it was maximal) was chosen. Core of freshwater anomaly was determined for several polynyas. Using results of our simulations, data from database with areas of polynyas, wind stress data and current speed data from several sources, we got vector diagrams of drift of anomalies. Within the limits of the seas were taken into account a vector of constant currents. The vector of displacement within the limits of each of the seas represented the sum of constant current and average for one month of a vector of isobaric drift. In the Arctic basin we used only a vector of isobaric drift. Vectors of isobaric drift are constructed by I. Karelin (AARI, St-Petersburg, Russia) on the basis of average for one month of fields of ground pressure. As shown in numerous researches, monthly averaging most adequately allow us to display a field of wind drift of ice. For construction of vector diagrams on sphere we used «MapInfo Professional 7.5». For conviction of a reality of our hypothetical assumptions of carry of anomalies of salinity we have executed comparison of a spatial-temporal arrangement of areas vector diagrams we got with an arrangement of real anomalies of the salinity revealed as a result of instrumental observations. Such results of comparison have surpassed all expectations. We got confirmation of position of fresh water areas from instrumental observations executed in 2005-2007 by several cruises of AARI institute. Thus good concurrence of time and the location of areas of abnormal fleshing, received by theoretical and instrumentally observed conditions is marked. The map of a field of anomalies of the salinity, constructed for 2007 is most indicative. On this map a number of isolated fresh water areas in surface waters clearly allocated. To each of these areas of observed freshening there corresponds predicted passage of core of predicted anomaly. We could conclude that there is concurrence of predicted fresh water anomalies and observed fresh water areas. It allows us to say hypothesis is working. Flaw lead polynyas really forming significant anomalies of salinity which being distributed in Arctic basin. These anomalies keep the properties within several years. Hydrodynamic aspects of distribution of anomalies are not clear yet. But the fact of formation and distribution of anomalies of salinity of surface waters in Arctic basin could be taken for granted. In a case when the climatic signal from the several seas simultaneously reach Greenland Sea climatically significant anomaly of fresh water of ice could appear. It capable to result in sharp change of a climatic situation. Probably, the similar situation was in 1963-1964 years when «Great Salinity Anomaly» was observed in North Atlantic. Changes of atmospheric circulation was so significant, that in Arctic regions has rather sharply increased ice cover areas and the temperature of air has gone down. In our opinion similar conditions could arise in the present period when after several years of extreme development of flaw lead polynyas extreme freshwater anomaly which reaching of Greenland Sea is possible to expect 2008-2009 should be generated. In 2008 several freshwater anomalies generated in various flaw lead polynyas in 2003-2004 years already has left to Greenland sea and in April, July and November has reached Northern Atlantic. Synoptic situations which, in our opinion, can be connected to the given phenomenon, and also reaction of the Arctic seas to the given atmospheric processes are shown. The analysis of a map of drift of anomalies allows us to conclude, that in 2009 it is necessary to expect an exit of the strong salinity anomaly generated from several large polynyas. To the given event there will correspond reduction of repeatability and reduction of areas of polynyas in the seas of the Siberian shelf, easing of carrying out concerning warm air masses to the Central Arctic regions and increase here ground atmospheric pressure in the cold period of year. In the summer period will take place strengthening of ice cover and, hence - downturn of temperature of air in Arctic regions. We could assume we are at the break point of temperature change and next year there will be cooling in Arctic. [1] Popov A., Rubchenia A. Flaw polynyas as a source of long-distance connections in climate system // Geophysical Research Abstracts, Vol. 10, EGU2008-A-02009, 2008 SRef-ID: 1607-7962/gra/EGU2008-A-02009 EGU General Assembly 2008

Survival time of the susceptible-infected-susceptible infection process on a graph.

PubMed

van de Bovenkamp, Ruud; Van Mieghem, Piet

2015-09-01

The survival time T is the longest time that a virus, a meme, or a failure can propagate in a network. Using the hitting time of the absorbing state in an uniformized embedded Markov chain of the continuous-time susceptible-infected-susceptible (SIS) Markov process, we derive an exact expression for the average survival time E[T] of a virus in the complete graph K_{N} and the star graph K_{1,N-1}. By using the survival time, instead of the average fraction of infected nodes, we propose a new method to approximate the SIS epidemic threshold τ_{c} that, at least for K_{N} and K_{1,N-1}, correctly scales with the number of nodes N and that is superior to the epidemic threshold τ_{c}^{(1)}=1/λ_{1} of the N-intertwined mean-field approximation, where λ_{1} is the spectral radius of the adjacency matrix of the graph G. Although this new approximation of the epidemic threshold offers a more intuitive understanding of the SIS process, it remains difficult to compare outbreaks in different graph types. For example, the survival in an arbitrary graph seems upper bounded by the complete graph and lower bounded by the star graph as a function of the normalized effective infection rate τ/τ_{c}^{(1)}. However, when the average fraction of infected nodes is used as a basis for comparison, the virus will survive in the star graph longer than in any other graph, making the star graph the worst-case graph instead of the complete graph. Finally, in non-Markovian SIS, the distribution of the spreading attempts over the infectious period of a node influences the survival time, even if the expected number of spreading attempts during an infectious period (the non-Markovian equivalent of the effective infection rate) is kept constant. Both early and late infection attempts lead to shorter survival times. Interestingly, just as in Markovian SIS, the survival times appear to be exponentially distributed, regardless of the infection and curing time distributions.

Averaging, passage through resonances, and capture into resonance in two-frequency systems

NASA Astrophysics Data System (ADS)

Neishtadt, A. I.

2014-10-01

Applying small perturbations to an integrable system leads to its slow evolution. For an approximate description of this evolution the classical averaging method prescribes averaging the rate of evolution over all the phases of the unperturbed motion. This simple recipe does not always produce correct results, because of resonances arising in the process of evolution. The phenomenon of capture into resonance consists in the system starting to evolve in such a way as to preserve the resonance property once it has arisen. This paper is concerned with application of the averaging method to a description of evolution in two-frequency systems. It is assumed that the trajectories of the averaged system intersect transversally the level surfaces of the frequency ratio and that certain other conditions of general position are satisfied. The rate of evolution is characterized by a small parameter \\varepsilon. The main content of the paper is a proof of the following result: outside a set of initial data with measure of order \\sqrt \\varepsilon the averaging method describes the evolution to within O(\\sqrt \\varepsilon \\vert\\ln\\varepsilon\\vert) for periods of time of order 1/\\varepsilon. This estimate is sharp. The exceptional set of measure \\sqrt \\varepsilon contains the initial data for phase points captured into resonance. A description of the motion of such phase points is given, along with a survey of related results on averaging. Examples of capture into resonance are presented for some problems in the dynamics of charged particles. Several open problems are stated. Bibliography: 65 titles.

Clinical and economic impact of infliximab one-hour infusion protocol in patients with inflammatory bowel diseases: A multicenter study

PubMed Central

Viola, Anna; Costantino, Giuseppe; Privitera, Antonino Carlo; Bossa, Fabrizio; Lauria, Angelo; Grossi, Laurino; Principi, Maria Beatrice; Della Valle, Nicola; Cappello, Maria

2017-01-01

AIM To assess the impact of short infliximab (IFX) infusion on hospital resource utilization and costs. METHODS All inflammatory bowel diseases (IBD) patients who received IFX 1 h infusion from March 2007 to September 2014 in eight centers from Southern Italy were included in the analysis. Demographic, clinical and infusion related data were collected. The potential benefits related to the short infusion protocol were assessed both in terms of time saving and increased infusion unit capacity. In addition, indirect patient-related cost savings were evaluated. RESULTS One hundred and twenty-five patients were recruited (64 with ulcerative colitis and 61 with Crohn’s disease). Median duration of disease was of 53 mo and mean age of pts at diagnosis was of 34 years (SD: ± 13). Adverse infusion reactions were reported in less than 4% both before and after short infusion. The total number of infusions across the selected centers was of 2501 (30.5% short infusions). In the analyzed cohort, 1143 h were saved (762 in the infusion and 381 in observation phases) through the rapid IFX infusion protocol. This time saving (-15% compared to the standard protocol in infusion phase) represents, from the hospital perspective, an opportunity to optimize infusion unit capacity by allocating the saved time in alternative cost-effective treatments. This is the case of opportunity cost that represents the value of forgone benefit which could be obtained from a resource in its next-best alternative use. Hence, an extra hour of infusion in the case of standard 2-h IFX represents a loss in opportunity to provide other cost effective services. The analysis showed that the short infusion increased the infusion units capacity up to 50% on days when the IFX infusions were scheduled (infusion phase). Furthermore, the analysis showed that the short IFX infusion protocol leads to time savings also in the post-infusion phase (observation) leading to a time saving of 10% on average among the analyzed centers. Finally, the short infusion protocol has been demonstrated to lead to indirect cost savings of €138/patient (average -€17.300 on the whole cohort). CONCLUSION A short IFX infusion protocol can be considered time and cost saving in comparison to the standard infusion protocol both from the hospital’s perspective, as it contributes to increase infusion units capacity, and the patients’ perspective, as it reduces indirect costs and the impact of treatment on everyday life and work productivity. PMID:28533923

Blowing momentum and duty cycle effect on aerodynamic performance of flap by pulsed blowing

NASA Astrophysics Data System (ADS)

Zhou, Ping; Wang, Yankui; Wang, Jinjun; Sha, Yongxiang

2017-04-01

Control surface, which is often located in the trailing edge of wings, is important in the attitude control of an aircraft. However, the efficiency of the control surface declines severely under the high deflect angle of the control surface because of the flow separation. To improve the efficiency of control surface, this study discusses a flow-control technique aimed at suppressing the flow separation by pulsed blowing at the leading edge of the control surface. Results indicated that flow separation over the control surface can be suppressed by pulsed blowing, and the maximum average lift coefficient of the control surface can be 95% times higher than that of without blowing when average blowing momentum coefficient is 0.03 relative to that of without blowing. Finally, this study shows that the average blowing momentum coefficient and non-dimensional frequency of pulsed blowing are two of the key parameters of the pulsed blowing control technique. Otherwise, duty cycle also has influence on the effect of pulsed blowing. Numerical simulation is used in this study.

In-vehicle measurement of ultrafine particles on compressed natural gas, conventional diesel, and oxidation-catalyst diesel heavy-duty transit buses.

PubMed

Hammond, Davyda; Jones, Steven; Lalor, Melinda

2007-02-01

Many metropolitan transit authorities are considering upgrading transit bus fleets to decrease ambient criteria pollutant levels. Advancements in engine and fuel technology have lead to a generation of lower-emission buses in a variety of fuel types. Dynamometer tests show substantial reductions in particulate mass emissions for younger buses (<10 years) over older models, but particle number reduction has not been verified in the research. Recent studies suggest that particle number is a more important factor than particle mass in determining health effects. In-vehicle particle number concentration measurements on conventional diesel, oxidation-catalyst diesel and compressed natural gas transit buses are compared to estimate relative in-vehicle particulate exposures. Two primary consistencies are observed from the data: the CNG buses have average particle count concentrations near the average concentrations for the oxidation-catalyst diesel buses, and the conventional diesel buses have average particle count concentrations approximately three to four times greater than the CNG buses. Particle number concentrations are also noticeably affected by bus idling behavior and ventilation options, such as, window position and air conditioning.

Poynting vector, energy densities, and pressure of collective transverse electromagnetic fluctuations in unmagnetized plasmas

NASA Astrophysics Data System (ADS)

Schlickeiser, R.

2012-01-01

A systematic calculation of the electromagnetic properties (Poynting vector, electromagnetic energy, and pressure) of the collective transverse fluctuations in unmagnetized plasmas with velocity-anisotropic plasma particle distributions functions is presented. Time-averaged electromagnetic properties for monochromatic weakly damped wave-like fluctuations and space-averaged electromagnetic properties for monochromatic weakly propagating and aperiodic fluctuations are calculated. For aperiodic fluctuations, the Poynting vector as well as the sum of the space-averaged electric and magnetic field energy densities vanish. However, aperiodic fluctuations possess a positive pressure given by its magnetic energy density. This finite pressure density pa of aperiodic fluctuations has important consequences for the dynamics of cosmic unmagnetized plasmas such as the intergalactic medium after reionization. Adopting the standard cosmological evolution model, we show that this additional pressure changes the expansion law of the universe leading to further deceleration. Negative vacuum pressure counterbalances this deceleration to an accelerating universe provided that the negative vacuum pressure is greater than 1.5pa, which we estimate to be of the order 2.1 . 10-16 dyn cm-2.

Hand and body radiation exposure with the use of mini C-arm fluoroscopy.

PubMed

Tuohy, Christopher J; Weikert, Douglas R; Watson, Jeffry T; Lee, Donald H

2011-04-01

To determine whole body and hand radiation exposure to the hand surgeon wearing a lead apron during routine intraoperative use of the mini C-arm fluoroscope. Four surgeons (3 hand attending surgeons and 1 hand fellow) monitored their radiation exposure for a total of 200 consecutive cases (50 cases per surgeon) requiring mini C-arm fluoroscopy. Each surgeon measured radiation exposure with a badge dosimeter placed on the outside breast pocket of the lead apron (external whole body exposure), a second badge dosimeter under the lead apron (shielded whole body exposure), and a ring dosimeter (hand exposure). Completed records were noted in 198 cases, with an average fluoroscopy time of 133.52 seconds and average cumulative dose of 19,260 rem-cm(2) per case. The total measured radiation exposures for the (1) external whole body exposure dosimeters were 16 mrem (for shallow depth), 7 mrem (for eye depth), and less than 1 mrem (for deep depth); (2) shielded whole body badge dosimeters recorded less than 1 mrem; and (3) ring dosimeters totaled 170 mrem. The total radial exposure for 4 ring dosimeters that had registered a threshold of 30 mrem or more of radiation exposure was 170 mrem at the skin level, for an average of 42.5 mrem per dosimeter ring or 6.3 mrem per case. This study of whole body and hand radiation exposure from the mini C-arm includes the largest number of surgical cases in the published literature. The measured whole body and hand radiation exposure received by the hand surgeon from the mini C-arm represents a minimal risk of radiation, based on the current National Council on Radiation Protection and Management standards of annual dose limits (5,000 mrem per year for whole body and 50,000 mrem per year to the extremities). Copyright © 2011 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Transition of carbon nanostructures in heptane diffusion flames

NASA Astrophysics Data System (ADS)

Hu, Wei-Chieh; Hou, Shuhn-Shyurng; Lin, Ta-Hui

2017-02-01

The flame synthesis has high potential in industrial production of carbon nanostructure (CNS). Unfortunately, the complexity of combustion chemistry leads to less controlling of synthesized products. In order to improve the understanding of the relation between flames and CNSs synthesized within, experiments were conducted through heptane flames in a stagnation-point liquid-pool system. The operating parameters for the synthesis include oxygen supply, sampling position, and sampling time. Two kinds of nanostructures were observed, carbon nanotube (CNT) and carbon nano-onion (CNO). CNTs were synthesized in a weaker flame near extinction. CNOs were synthesized in a more sooty flame. The average diameter of CNTs formed at oxygen concentration of 15% was in the range of 20-30 nm. For oxygen concentration of 17%, the average diameter of CNTs ranged from 24 to 27 nm, while that of CNOs was around 28 nm. For oxygen concentration of 19%, the average diameter of CNOs produced at the sampling position 0.5 mm below the flame front was about 57 nm, while the average diameters of CNOs formed at the sampling positions 1-2.5 mm below the flame front were in the range of 20-25 nm. A transition from CNT to CNO was observed by variation of sampling position in a flame. We found that the morphology of CNS is directly affected by the presence of soot layer due to the carbonaceous environment and the growth mechanisms of CNT and CNO. The sampling time can alter the yield of CNSs depending on the temperature of sampling position, but the morphology of products is not affected.

Breath stacking in children with neuromuscular disorders.

PubMed

Jenkins, H M; Stocki, A; Kriellaars, D; Pasterkamp, H

2014-06-01

Respiratory muscle weakness in neuromuscular disorders (NMD) can lead to shallow breathing and respiratory insufficiency over time. Children with NMD often cannot perform maneuvers to recruit lung volume. In adults, breath stacking with a mask and one-way valve can achieve significantly increased lung volumes. To evaluate involuntary breath stacking (IBS) in NMD, we studied 23 children of whom 15 were cognitively aware and able to communicate verbally. For IBS, a one-way valve and pneumotachograph were attached to a face mask. Tidal volumes (Vt) and minute ventilation (VE ) were calculated from airflow over 30 sec before and after 15 sec of expiratory valve closure. Six cooperative male subjects with Duchenne muscular dystrophy (DMD) participated in a subsequent comparison of IBS with voluntary breath stacking (VBS) and supported breath stacking (SBS). The average Vt in those studied with IBS was 277 ml (range 29-598 ml). The average increase in volume by stacking was 599 ml (range -140 to 2,916 ml) above Vt . The average number of stacked breaths was 4.5 (range 0-17). VE increased on average by 18% after stacking (P < 0.05, paired t-test). Oxygen saturation did not change after stacking. Four of the 23 children did not breath stack. Compared to IBS, VBS achieved similar volumes in the six subjects with DMD but SBS was more successful in those with greatest muscle weakness. IBS may achieve breath volumes of approximately three times Vt and may be particularly useful in non-cooperative subjects with milder degrees of respiratory muscle weakness. © 2013 Wiley Periodicals, Inc.

No evidence found for an association between prednisone dose and FVC change in newly-treated pulmonary sarcoidosis.

PubMed

Broos, Caroline E; Poell, Linda H C; Looman, Caspar W N; In 't Veen, Johannes C C M; Grootenboers, Marco J J H; Heller, Roxane; van den Toorn, Leon M; Wapenaar, Monique; Hoogsteden, Henk C; Kool, Mirjam; Wijsenbeek, Marlies S; van den Blink, Bernt

2018-05-01

Prednisone is used as first-line therapy for pulmonary sarcoidosis. What dosing strategy has the best balance between effect and side-effects is largely unknown. We analyzed change in forced vital capacity (FVC) and weight during different prednisone doses used in daily practice for treatment naïve pulmonary sarcoidosis patients. Multilevel models were used to describe FVC and weight change over time. Correlations were calculated using linear regression models. Fifty-four patients were included. FVC changed over time (p < 0.001), with an average increase of 9.6% predicted (95% CI: 7.2 to 12.1) at 12 months. Weight changed significantly over time (p < 0.001), with an average increase of 4.3 kg (95% CI: 3.0 to 5.6) at 12 months. Although FVC and weight changed significantly over time, there was little correlation between prednisone dose and FVC change, while weight increase correlated significantly with cumulative prednisone dose at 24 months. In patients treated with a high cumulative prednisone dose, baseline FVC was on average lower (p = 0.001) compared to low dose treated patients, while no significant differences were observed in need for second/third-line therapy or number of exacerbations. A strategy leading to a low cumulative dose at 12 months was defined by rapid dose tapering to 10 mg/day within 3.5 months. These results suggest that prednisone therapy aimed at improving or preserving FVC in newly- treated pulmonary sarcoidosis can often be reduced in dose, using a treatment regimen that is characterized by early dose tapering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effective coating of titania nanoparticles with alumina via atomic layer deposition

NASA Astrophysics Data System (ADS)

Azizpour, H.; Talebi, M.; Tichelaar, F. D.; Sotudeh-Gharebagh, R.; Guo, J.; van Ommen, J. R.; Mostoufi, N.

2017-12-01

Alumina films were deposited on titania nanoparticles via atomic layer deposition (ALD) in a fluidized bed reactor at 180 °C and 1 bar. Online mass spectrometry was used for real time monitoring of effluent gases from the reactor during each reaction cycle in order to determine the optimal dosing time of precursors. Different oxygen sources were used to see which oxygen source, in combination with trimethyl aluminium (TMA), provides the highest alumina growth per cycle (GPC). Experiments were carried out in 4, 7 and 10 cycles using the optimal dosing time of precursors. Several characterization methods, such as high resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR), X-ray diffraction (XRD) and instrumental neutron activation analysis (INAA), were conducted on the products. Formation of the alumina film was confirmed by EDX mapping and EDX line profiling, FTIR and TEM. When using either water or deuterium oxide as the oxygen source, the thickness of the alumina film was greater than that of ozone. The average GPC measured by TEM for the ALD of TMA with water, deuterium oxide and ozone was about 0.16 nm, 0.15 nm and 0.11 nm, respectively. The average GPC calculated using the mass fraction of aluminum from INAA was close to those measured from TEM images. Excess amounts of precursors lead to a higher average growth of alumina film per cycle due to insufficient purging time. XRD analysis demonstrated that amorphous alumina was coated on titania nanoparticles. This amorphous layer was easily distinguished from the crystalline core in the TEM images. Decrease in the photocatalytic activity of titania nanoparticles after alumina coating was confirmed by measuring degradation of Rhodamine B by ultraviolet irradiation.

Galvanic Corrosion of Lead by Iron (Oxyhydr)Oxides: Potential Impacts on Drinking Water Quality.

PubMed

Trueman, Benjamin F; Sweet, Gregory A; Harding, Matthew D; Estabrook, Hayden; Bishop, D Paul; Gagnon, Graham A

2017-06-20

Lead exposure via drinking water remains a significant public health risk; this study explored the potential effects of upstream iron corrosion on lead mobility in water distribution systems. Specifically, galvanic corrosion of lead by iron (oxyhydr)oxides was investigated. Coupling an iron mineral cathode with metallic lead in a galvanic cell increased lead release by 531 μg L -1 on average-a 9-fold increase over uniform corrosion in the absence of iron. Cathodes were composed of spark plasma sintered Fe 3 O 4 or α-Fe 2 O 3 or field-extracted Fe 3 O 4 and α-FeOOH. Orthophosphate immobilized oxidized lead as insoluble hydroxypyromorphite, while humic acid enhanced lead mobility. Addition of a humic isolate increased lead release due to uniform corrosion by 81 μg L -1 and-upon coupling lead to a mineral cathode-release due to galvanic corrosion by 990 μg L -1 . Elevated lead in the presence of humic acid appeared to be driven by complexation, with 208 Pb and UV 254 size-exclusion chromatograms exhibiting strong correlation under these conditions (R 2 average = 0.87). A significant iron corrosion effect was consistent with field data: lead levels after lead service line replacement were greater by factors of 2.3-4.7 at sites supplied by unlined cast iron distribution mains compared with the alternative, lined ductile iron.

Lead concentration in meat from lead-killed moose and predicted human exposure using Monte Carlo simulation.

PubMed

Lindboe, M; Henrichsen, E N; Høgåsen, H R; Bernhoft, A

2012-01-01

Lead-based hunting ammunitions are still common in most countries. On impact such ammunition releases fragments which are widely distributed within the carcass. In Norway, wild game is an important meat source for segments of the population and 95% of hunters use lead-based bullets. In this paper, we have investigated the lead content of ground meat from moose (Alces alces) intended for human consumption in Norway, and have predicted human exposure through this source. Fifty-two samples from different batches of ground meat from moose killed with lead-based bullets were randomly collected. The lead content was measured by atomic absorption spectroscopy. The lead intake from exposure to moose meat over time, depending on the frequency of intake and portion size, was predicted using Monte Carlo simulation. In 81% of the batches, lead levels were above the limit of quantification of 0.03 mg kg(-1), ranging up to 110 mg kg(-1). The mean lead concentration was 5.6 mg kg(-1), i.e. 56 times the European Commission limit for lead in meat. For consumers eating a moderate meat serving (2 g kg(-1) bw), a single serving would give a lead intake of 11 µg kg(-1) bw on average, with maximum of 220 µg kg(-1) bw. Using Monte Carlo simulation, the median (and 97.5th percentile) predicted weekly intake of lead from moose meat was 12 µg kg(-1) bw (27 µg kg(-1) bw) for one serving per week and 25 µg kg(-1) bw (45 µg kg(-1) bw) for two servings per week. The results indicate that the intake of meat from big game shot with lead-based bullets imposes a significant contribution to the total human lead exposure. The provisional tolerable weekly intake set by the World Health Organization (WHO) of 25 µg kg(-1) bw is likely to be exceeded in people eating moose meat on a regular basis. The European Food Safety Authority (EFSA) has recently concluded that adverse effects may be present at even lower exposure doses. Hence, even occasional consumption of big game meat with lead levels as those found in the present study may imply an increased risk for adverse health effects. Children and women of child-bearing age are of special concern due to the neurodevelopmental effects of lead.

Extending flood forecasting lead time in large basin by coupling bias-corrected WRF QPF with distributed hydrological model

NASA Astrophysics Data System (ADS)

LI, J.; Chen, Y.; Wang, H. Y.

2016-12-01

In large basin flood forecasting, the forecasting lead time is very important. Advances in numerical weather forecasting in the past decades provides new input to extend flood forecasting lead time in large rivers. Challenges for fulfilling this goal currently is that the uncertainty of QPF with these kinds of NWP models are still high, so controlling the uncertainty of QPF is an emerging technique requirement.The Weather Research and Forecasting (WRF) model is one of these NWPs, and how to control the QPF uncertainty of WRF is the research topic of many researchers among the meteorological community. In this study, the QPF products in the Liujiang river basin, a big river with a drainage area of 56,000 km2, was compared with the ground observation precipitation from a rain gauge networks firstly, and the results show that the uncertainty of the WRF QPF is relatively high. So a post-processed algorithm by correlating the QPF with the observed precipitation is proposed to remove the systematical bias in QPF. With this algorithm, the post-processed WRF QPF is close to the ground observed precipitation in area-averaged precipitation. Then the precipitation is coupled with the Liuxihe model, a physically based distributed hydrological model that is widely used in small watershed flash flood forecasting. The Liuxihe Model has the advantage with gridded precipitation from NWP and could optimize model parameters when there are some observed hydrological data even there is only a few, it also has very high model resolution to improve model performance, and runs on high performance supercomputer with parallel algorithm if executed in large rivers. Two flood events in the Liujiang River were collected, one was used to optimize the model parameters and another is used to validate the model. The results show that the river flow simulation has been improved largely, and could be used for real-time flood forecasting trail in extending flood forecasting leading time.

On the impacts of computing daily temperatures as the average of the daily minimum and maximum temperatures

NASA Astrophysics Data System (ADS)

Villarini, Gabriele; Khouakhi, Abdou; Cunningham, Evan

2017-12-01

Daily temperature values are generally computed as the average of the daily minimum and maximum observations, which can lead to biases in the estimation of daily averaged values. This study examines the impacts of these biases on the calculation of climatology and trends in temperature extremes at 409 sites in North America with at least 25 years of complete hourly records. Our results show that the calculation of daily temperature based on the average of minimum and maximum daily readings leads to an overestimation of the daily values of 10+ % when focusing on extremes and values above (below) high (low) thresholds. Moreover, the effects of the data processing method on trend estimation are generally small, even though the use of the daily minimum and maximum readings reduces the power of trend detection ( 5-10% fewer trends detected in comparison with the reference data).

Economic analysis of participation in physical activity in England: implications for health policy.

PubMed

Anokye, Nana Kwame; Pokhrel, Subhash; Fox-Rushby, Julia

2014-09-14

Changing the relative price of (in) activity is an important tool for health policies. Nonetheless, to date, analyses of correlates of physical activity (PA) have excluded the notion of price. Using the first nationwide dataset on prices of PA for England, we explore for the first time how money and time prices are associated with PA (in general) and specific activities. A nationally representative telephone follow-up survey to Health Survey for England (HSE) 2008 was undertaken in 2010. The sample covered individuals who reported to have undertaken some PA in the HSE 2008. Questions focussed on: ex-post money and time prices; type and quantity of PA; perceived benefits of PA and socio-economic details. Count regression models (all activities together, and swimming, workout, walking separately) were fitted to investigate the variation in quantity of PA. Of 1683 respondents, 83% participated in PA (one or more activities), and spent an average of £2.40 per occasion of participation in PA and 23 minutes travelling. Participation in PA was negatively associated with money prices per occasion (i.e. family member/child care fees, parking fees, and facility charges) and travel time price. Participation in PA was more sensitive to travel time price than money price. Among the specific activities, the money price effect was highest for swimming with a 10% higher price associated with 29% fewer occasions of swimming; followed by workout (3% fewer occasions) and walking (2% fewer occasions). Only swimming and workout were sensitive to travel time price. People who felt doing PA could help them 'get outdoors', 'have fun', or 'lose weight' were likely to do more PA. Two main policy implications emerge from the findings. First, the results support the notion that positive financial incentives, e.g. subsidising price of participation, could generally lead to an increase in quantity of PA among those already exercising. Second, such policies could lead to desired policy goals if implemented at an individual activity level (e.g. 50% subsidy on swimming entrance charges) rather than a blanket implementation (e.g. subsidising average entrance charges across all activities by 50%).

How much do persons with Alzheimer's disease cost Medicare?

PubMed

Taylor, D H; Sloan, F A

2000-06-01

Medicare claims are increasingly being used to identify persons with chronic diseases such as Alzheimer's disease (AD) for the purpose of determining the cost to Medicare of caring for such persons. Past work has been limited by the use of only 1 or 2 years of claims data to identify cases, leading to worries that this might lead to an undercount of prevalent cases and bias cost findings. To analyze the average total cost to the Medicare program in 1994 of persons with a claims-based diagnosis of AD, using a 12-year period of claims history to identify prevalent cases, and to investigate the effect on cost of time since diagnosis. A cross-sectional design with a 12-year retrospective period to identify persons with AD. Medical care practices, hospitals, and other providers of services to Medicare beneficiaries in the US in 1994. Respondents to the screener (n = 10,858) and community (5429) and institutional (n = 1341) questionnaire of the 1994 National Long Term Care Survey, with and without a claims-based diagnosis of AD. Average total cost to Medicare in 1994, measured as the actual amount Medicare paid for inpatient, outpatient, home health, skilled nursing facility, hospice, and Part B services, including payments to physicians, and other items such as durable medical equipment. We also measured disability in a variety of ways, including cognition, activity limitations, and residence in a nursing home. The average total cost to Medicare of persons with a claims-based diagnosis of AD was $6021 versus $2310 (P < .001) for persons without a diagnosis. When adjusting for patient characteristics, the ratio of cost between persons with AD and those without was reduced to about 1.6 to 1. Time since diagnosis was an important predictor of average total cost in 1994, with each additional year since diagnosis resulting in a $248 (P = .04) decrease in total cost (about 10% of the total sample mean cost of $2426). There was mixed evidence that persons with a diagnosis of AD incurred less cost than otherwise similarly disabled Medicare beneficiaries. Time since diagnosis with AD is an important predictor of cost and one that should be explicitly included in any rate-setting formula. Expanding the period used to identify cases resulted in an increase in the unadjusted ratio of cost of a Medicare beneficiary with AD relative to one without primarily because our control group costs are lower compared with those of past work.

Lead and the London Metal Exchange — a happy marriage? The outlook for prices and pricing issues confronting the lead industry

NASA Astrophysics Data System (ADS)

Keen, A.

The outlook for the supply-demand balance for refined lead is addressed and takes into account the growing non-fundamental forces on price determination. The market for refined lead is presently experiencing its first year of surplus since the major crisis of the early 1990s. Earlier in the decade, the dissolution of the Soviet Union and recession in developed economies led to a significant rise in London Metal Exchange (LME) stocks. An acceleration absorbed these stocks in an 18-month period in the mid-1990s, and LME lead prices reacted to the market deficit by peaking above US900. Since then the market has balanced, yet prices have declined steadily to less that 50% of their peak levels. It is argued that, on fundamental grounds, prices have fallen below justified levels. As much of the reason for this depression between 1997 and 1999 has been the generally depressive effect of the Asian economic crisis on financial markets, the level of lead prices may now be due for a correction. Other metals have begun to increase during the first half of 1999 and lead, given its neutral fundamental outlook, is now poised to participate in the generally more buoyant moods across LME metals. An increase of approximately 10% in average LME 3-month settlement prices is forecast and will result in annual average prices of US 570/tonne over the course of 1999. Monthly averages and spot prices are predicted to exceed this level, particularly during peak third-quarter demand.

Lead accumulation by jabon seedling (Anthocephalus cadamba) on tailing media with application of compost and arbuscular mycorrhizal fungi

NASA Astrophysics Data System (ADS)

Setyaningsih, L.; Setiadi, Y.; Budi, S. W.; Hamim; Sopandie, D.

2017-03-01

Lead (Pb) is one of the dangerous heavy metal contained in tailing that needs remediation activity. This study aimed to investigate the potency of jabon to take up and accumulate lead in its tissue by the application of compost and arbuscular mycorrhiza fungus (AMF) on pot observation. In Pb-containing tailing media, the average levels of Pb in roots seedling was 50% greater as compared to the levels of Pb in the stem and leaves of seedlings. Application of compost in tailings media significantly increased (p ≤ 0.5) the average levels of Pb in the roots and stems, but decreased Pb levels in leaves. Applications AMF significantly decreased (p ≤ 0.5) the average levels of Pb in the roots, stem and leaves of seedlings by approximately 18-33%. The combination applications of compost and AMF significantly (p ≤ 0.5) increased the level of Pb in the roots, stems and leaves of seedlings at 6, 16 and 27 fold respectively than that in control plant (without compost and AMF). After 12 weeks exposure, lead bioconcentration factor varied from 0.1-1.6 in seedling tissue with transport factor varied from 0.1-1.0. The application of active compost and AMF increased 1-15 fold lead accumulation from control, and the biggest accumulation was 452.9 x10-2 mg/plant with Pb concentration of 1.5 mM. Active compost and AMF application supported jabon seedling to act as lead phytostabilizer and to remove lead from the tailing to the above part of the plant.

Thermal transport across metal–insulator interface via electron–phonon interaction.

PubMed

Zhang, Lifa; Lü, Jing-Tao; Wang, Jian-Sheng; Li, Baowen

2013-11-06

The thermal transport across a metal–insulator interface can be characterized by electron–phonon interaction through which an electron lead is coupled to a phonon lead if phonon–phonon coupling at the interface is very weak. We investigate the thermal conductance and rectification between the electron part and the phonon part using the nonequilibrium Green's function method. It is found that the thermal conductance has a nonmonotonic behavior as a function of average temperature or the coupling strength between the phonon leads in the metal part and the insulator part. The metal–insulator interface shows a clear thermal rectification effect, which can be reversed by a change in average temperature or the electron–phonon coupling.

40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

40 CFR 471.14 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.14 Pretreatment standards for existing sources (PSES... in lead-tin-bismuth forming process wastewater introduced into a POTW shall not exceed the following... Maximum for monthly average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with...

Aerodynamics of yacht sails: viscous flow features and surface pressure distributions

NASA Astrophysics Data System (ADS)

Viola, Ignazio Maria

2014-11-01

The present paper presents the first Detached Eddy Simulation (DES) on a yacht sails. Wind tunnel experiments on a 1:15th model-scale sailing yacht with an asymmetric spinnaker (fore sail) and a mainsails (aft sail) were modelled using several time and grid resolutions. Also the Reynolds-average Navier-Stokes (RANS) equations were solved for comparison with DES. The computed forces and surface pressure distributions were compared with those measured with both flexible and rigid sails in the wind tunnel and good agreement was found. For the first time it was possible to recognise the coherent and steady nature of the leading edge vortex that develops on the leeward side of the asymmetric spinnaker and which significantly contributes to the overall drive force. The leading edge vortex increases in diameter from the foot to the head of the sail, where it becomes the tip vortex and convects downstream in the direction of the far field velocity. The tip vortex from the head of the mainsail rolls around the one of the spinnaker. The spanwise twist of the spinnaker leads to a mid-span helicoidal vortex, which has never been reported by previous authors, with an horizontal axis and rotating in the same direction of the tip vortex.

A simple route for making surfactant free lead sulfide (PbS) quantum dots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alam, Firoz; Kumar, Neetesh; Dutta, Viresh, E-mail: vdutta@ces.iitd.ac.in

2015-05-15

Highlights: • Surfactant free PbS NCs were successfully synthesised using CoSP technique. • The technique eliminates the requirements of washing to remove the ligands. • Grinding using mortar and pestle creates well separated PbS QDs. • Surfactant free PbS NCs are stable and do not show any degradation with time. - Abstract: An efficient, cost effective and less time consuming method suitable for mass production of surfactant free quantum dots (QDs) of lead sulfide (PbS) is reported. PbS nanocrystals (NCs) are first synthesised by continuous spray pyrolysis (CoSP) technique and de-agglomeration into PbS quantum dots (QDs) is achieved by vigorousmore » mechanical grinding using mortar and pestle. Lead acetate and thiourea were used as the precursor materials for preparation of surfactant free PbS NCs. The broadening in XRD peaks of ground NCs as compared to as synthesized PbS NCs clearly indicated the reduction in particle size to be QDs of PbS. The TEM images also showed that ground PbS NCs were nearly spherical in shape having an average diameter in the range of 4–6 nm. The shift in optical gap from 0.41 eV to 1.47 eV supported the QD formation.« less

Controlling Lead in Drinking Water for Schools and Day Care Facilities: A Summary of State Programs.

ERIC Educational Resources Information Center

Environmental Protection Agency, 2004

2004-01-01

Children are susceptible to adverse health effects from lead, such as impaired mental development, IQ deficits, shorter attention span, and lower birth weight. Exposure to lead is a significant health concern, particularly for young children and infants whose growing bodies tend to absorb more lead than the average adult. Testing water in…

40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

40 CFR 471.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.12 Effluent limitations representing the degree of... average mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsion Antimony 0.067... lead-tin-bismuth rolled with soap solutions Antimony 0.120 0.055 Lead 0.018 0.009 (c) Drawing spent...

40 CFR 461.35 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2010 CFR

2010-07-01

...) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.35...—pounds per 1,000,000 pounds of lead used Copper 0.026 0.012 Lead 0.005 0.002 (4) Subpart C—Battery Wash... Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds per 1,000...

40 CFR 461.32 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory... lead used Copper 0.039 0.021 Lead 0.008 0.004 Iron 0.030 0.010 (4) Subpart C—Battery Wash (Detergent... Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds per 1,000...

40 CFR 461.35 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2011 CFR

2011-07-01

...) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory § 461.35...—pounds per 1,000,000 pounds of lead used Copper 0.026 0.012 Lead 0.005 0.002 (4) Subpart C—Battery Wash... Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds per 1,000...

40 CFR 461.32 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory... lead used Copper 0.039 0.021 Lead 0.008 0.004 Iron 0.030 0.010 (4) Subpart C—Battery Wash (Detergent... Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds per 1,000...

40 CFR 461.32 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Lead Subcategory... lead used Copper 0.039 0.021 Lead 0.008 0.004 Iron 0.030 0.010 (4) Subpart C—Battery Wash (Detergent... Maximum for monthly average Metric units—mg/kg of lead in trucked batteries English units—pounds per 1,000...

Mathematical foundations of hybrid data assimilation from a synchronization perspective

NASA Astrophysics Data System (ADS)

Penny, Stephen G.

2017-12-01

The state-of-the-art data assimilation methods used today in operational weather prediction centers around the world can be classified as generalized one-way coupled impulsive synchronization. This classification permits the investigation of hybrid data assimilation methods, which combine dynamic error estimates of the system state with long time-averaged (climatological) error estimates, from a synchronization perspective. Illustrative results show how dynamically informed formulations of the coupling matrix (via an Ensemble Kalman Filter, EnKF) can lead to synchronization when observing networks are sparse and how hybrid methods can lead to synchronization when those dynamic formulations are inadequate (due to small ensemble sizes). A large-scale application with a global ocean general circulation model is also presented. Results indicate that the hybrid methods also have useful applications in generalized synchronization, in particular, for correcting systematic model errors.

Mathematical foundations of hybrid data assimilation from a synchronization perspective.

PubMed

Penny, Stephen G

2017-12-01

The state-of-the-art data assimilation methods used today in operational weather prediction centers around the world can be classified as generalized one-way coupled impulsive synchronization. This classification permits the investigation of hybrid data assimilation methods, which combine dynamic error estimates of the system state with long time-averaged (climatological) error estimates, from a synchronization perspective. Illustrative results show how dynamically informed formulations of the coupling matrix (via an Ensemble Kalman Filter, EnKF) can lead to synchronization when observing networks are sparse and how hybrid methods can lead to synchronization when those dynamic formulations are inadequate (due to small ensemble sizes). A large-scale application with a global ocean general circulation model is also presented. Results indicate that the hybrid methods also have useful applications in generalized synchronization, in particular, for correcting systematic model errors.

Survival of spectacled eider adult females and ducklings during brood rearing

USGS Publications Warehouse

Flint, Paul L.; Grand, James B.

1997-01-01

We studied survival of adult female and duckling spectacled eiders (Somateria fischeri) during brood rearing on the Yukon-Kuskokwim Delta, Alaska from 1993 to 1995. Duckling survival to 30 days of age averaged 34% with a 95% confidence interval from 25 to 47%. Half (49%) of radiomarked adult females had lost all their ducklings by 30 days after hatch. Most (74%) duckling mortality occurred in the first 10 days. Adult female survival during the first 30 days of brood rearing was 93 ± 3% (SE). Females died from lead poisoning, as a result of ingesting lead shot, and predation. Mortality of adult females during brood rearing is probably higher than during other times of the year. Low adult female survival during the breeding season may be contributing to the overall population decline of spectacled eiders.

[The acoustics of the open mastoid cavity (so-called "radical cavity") and its modification by surgical measures. II. Clinical studies].

PubMed

Hartwein, J

1992-09-01

The acoustic resonance of a severely altered outer ear channel (radical mastoid cavity) is investigated in a series of 18 patients who underwent revision surgery by means of in-situ measurements of the sound-pressure-level near the tympanic membrane. While the average volume of the open cavity differs from the normal ear channel for the factor 2.5, the size of the external meatus is--in average--only 20% larger. This leads to an average frequency in patients with open cavity of 1939 Hz, more than 1000 Hz less than in a series (n = 20) of normal ears (average resonance frequency: 2942 Hz). The altered acoustic behaviour of the open cavity leads to partial extensive discrepancies of the resonance-caused sound-pressure augmentation in the frequencies of 3 and 4 kHz, which are important for speech perception. The average difference is more than 10 dB (SPL). Proved surgical techniques of cavity obliteration and meatoplasty can lead to a nearly normalized acoustic behaviour of the outer ear in a statistic significant way. Due to these surgical procedures, an average postoperative resonance frequency of 2421 Hz could be reached in our patients. Especially, the resonance-caused sound-pressure augmentation in 3-4 kHz could nearly be equalized to such of a normal outer ear. Differences in the acoustic behaviour of the outer ear as can be found between patients with an open mastoid cavity and normal ears can almost be eliminated surgically.(ABSTRACT TRUNCATED AT 250 WORDS)

Association Between Breast Cancer Disease Progression and Workplace Productivity in the United States.

PubMed

Yin, Wesley; Horblyuk, Ruslan; Perkins, Julia Jane; Sison, Steve; Smith, Greg; Snider, Julia Thornton; Wu, Yanyu; Philipson, Tomas J

2017-02-01

Determine workplace productivity losses attributable to breast cancer progression. Longitudinal analysis linking 2005 to 2012 medical and pharmacy claims and workplace absence data in the US patients were commercially insured women aged 18 to 64 diagnosed with breast cancer. Productivity was measured as employment status and total quarterly workplace hours missed, and valued using average US wages. Six thousand four hundred and nine women were included. Breast cancer progression was associated with a lower probability of employment (hazard ratio [HR] = 0.65, P < 0.01) and increased workplace hours missed. The annual value of missed work was $24,166 for non-metastatic and $30,666 for metastatic patients. Thus, progression to metastatic disease is associated with an additional $6500 in lost work time (P < 0.05), or 14% of average US wages. Breast cancer progression leads to diminished likelihood of employment, increased workplace hours missed, and increased cost burden.

Evaluating the effect of aging on interference resolution with time-varying complex networks analysis

PubMed Central

Ariza, Pedro; Solesio-Jofre, Elena; Martínez, Johann H.; Pineda-Pardo, José A.; Niso, Guiomar; Maestú, Fernando; Buldú, Javier M.

2015-01-01

In this study we used graph theory analysis to investigate age-related reorganization of functional networks during the active maintenance of information that is interrupted by external interference. Additionally, we sought to investigate network differences before and after averaging network parameters between both maintenance and interference windows. We compared young and older adults by measuring their magnetoencephalographic recordings during an interference-based working memory task restricted to successful recognitions. Data analysis focused on the topology/temporal evolution of functional networks during both the maintenance and interference windows. We observed that: (a) Older adults require higher synchronization between cortical brain sites in order to achieve a successful recognition, (b) The main differences between age groups arise during the interference window, (c) Older adults show reduced ability to reorganize network topology when interference is introduced, and (d) Averaging network parameters leads to a loss of sensitivity to detect age differences. PMID:26029079

Real-time Interplanetary Shock Prediction System

NASA Astrophysics Data System (ADS)

Vandegriff, J. D.; Ho, G. C.; Plauger, J. M.

2002-05-01

We are creating a system to predict the arrival times and maximum intensities of energetic storm particle (ESP) events at the earth using particle fluxes measured by the EPAM instrument aboard NASA's ACE spacecraft. Real-time flux measurements, consisting of 5 minute averages made available 24 hours per day by the NOAA Space Environment Center, are fed into algorithms looking for characteristic changes in flux, velocity dispersion, and anisotropy. These quantities typically show changes up to 3 hours before shock passage, and thus we expect our system to deliver enhanced probabilities for shock arrival with approximately the same lead time. Forecasting information will be made publicly available through http://sd-www.jhuapl.edu/ACE/EPAM/, the Johns Hopkins University Applied Physics Lab web site for the ACE/EPAM instrument. Early results on the training of our algorithms and comparisons with past shock data will be presented.

Sufficient condition for a finite-time singularity in a high-symmetry Euler flow: Analysis and statistics

NASA Astrophysics Data System (ADS)

Ng, C. S.; Bhattacharjee, A.

1996-08-01

A sufficient condition is obtained for the development of a finite-time singularity in a highly symmetric Euler flow, first proposed by Kida [J. Phys. Soc. Jpn. 54, 2132 (1995)] and recently simulated by Boratav and Pelz [Phys. Fluids 6, 2757 (1994)]. It is shown that if the second-order spatial derivative of the pressure (pxx) is positive following a Lagrangian element (on the x axis), then a finite-time singularity must occur. Under some assumptions, this Lagrangian sufficient condition can be reduced to an Eulerian sufficient condition which requires that the fourth-order spatial derivative of the pressure (pxxxx) at the origin be positive for all times leading up to the singularity. Analytical as well as direct numerical evaluation over a large ensemble of initial conditions demonstrate that for fixed total energy, pxxxx is predominantly positive with the average value growing with the numbers of modes.

Positioning of nasobiliary tube using magnet-loaded catheters.

PubMed

Watanabe, Seitaro; Sato, Takamitsu; Kato, Shingo; Hosono, Kunihiro; Kobayashi, Noritoshi; Nakajima, Atsushi; Kubota, Kensuke

2013-10-01

In endoscopic nasobiliary drainage (ENBD), repositioning the catheter from the mouth to the nose is complicated. We devised a method using catheters with magnets and verified its utility and safety. We prospectively enrolled 20 patients undergoing ENBD at Yokohama City University Hospital. The procedures were successful in all 20 cases and no case required a change of operators to a senior doctor. The mean time for the procedure was 36.6 seconds. The emetic reflex was induced 0.5 times on average using the magnet method. The mean X-ray exposure time was 29.6 seconds. No complications occurred. The magnet-loaded catheter method for positioning the ENBD catheter before finally leading it through the nose took little time and was performed successfully and safely. Therefore, the magnet method could become the first choice among techniques for ENBD catheter placement. © Georg Thieme Verlag KG Stuttgart · New York.

Mitigation of nonlinear fiber distortion using optical phase conjugation for mode-division multiplexed transmission

NASA Astrophysics Data System (ADS)

Zhang, Kai; Gao, Guanjun; Zhang, Jie; Fei, Aimei; Cvijetic, Milorad

2018-07-01

We have investigated and proposed the use of optical phase conjugation (OPC) technique to mitigate the impact of fiber nonlinearities in mode-division multiplexed transmission systems. Numerical simulations are performed for three wavelengths, each loaded with 200 Gb/s dual-polarization 16-level quadrature amplitude modulation (DP-16QAM) format, in weakly guided two-mode fiber. It is known that differential mode group delay (DMGD) in mode-division multiplexed (MDM) transmission systems could be beneficial for system performance of MDM system with MIMO compensation in place. On the other side, for MDM system with OPC in place, the presence of DMGD may limit the overall benefits since signal power evolution per spatial modes should be symmetrical at the system midpoint in order to realize an effective compensation of the nonlinear effects. Our simulation results show that in the reference case (in the absence of DMGD), the employment of OPC module would lead to an average Q-factor improvement of approximately 10 dB. At the same time, in the presence of DMGD, an average Q-factor improvement would be ∼2.8 dB for WDM case. In addition, due to asymmetrical signal power map, the penalties induced by a periodic amplification process cannot be ideally compensated by the midpoint insertion of OPC. However, by accounting the impacts of both DMGD and asymmetrical signal power map, the insertion of the OPC system will still lead to an average Q-factor improvement of ∼1 dB for WDM channel arrangement.

Reduced risk estimations after remediation of lead (Pb) in drinking water at two US school districts.

PubMed

Triantafyllidou, Simoni; Le, Trung; Gallagher, Daniel; Edwards, Marc

2014-01-01

The risk of students to develop elevated blood lead from drinking water consumption at schools was assessed, which is a different approach from predictions of geometric mean blood lead levels. Measured water lead levels (WLLs) from 63 elementary schools in Seattle and 601 elementary schools in Los Angeles were acquired before and after voluntary remediation of water lead contamination problems. Combined exposures to measured school WLLs (first-draw and flushed, 50% of water consumption) and home WLLs (50% of water consumption) were used as inputs to the Integrated Exposure Uptake Biokinetic (IEUBK) model for each school. In Seattle an average 11.2% of students were predicted to exceed a blood lead threshold of 5 μg/dL across 63 schools pre-remediation, but predicted risks at individual schools varied (7% risk of exceedance at a "low exposure school", 11% risk at a "typical exposure school", and 31% risk at a "high exposure school"). Addition of water filters and removal of lead plumbing lowered school WLL inputs to the model, and reduced the predicted risk output to 4.8% on average for Seattle elementary students across all 63 schools. The remnant post-remediation risk was attributable to other assumed background lead sources in the model (air, soil, dust, diet and home WLLs), with school WLLs practically eliminated as a health threat. Los Angeles schools instead instituted a flushing program which was assumed to eliminate first-draw WLLs as inputs to the model. With assumed benefits of remedial flushing, the predicted average risk of students to exceed a BLL threshold of 5 μg/dL dropped from 8.6% to 6.0% across 601 schools. In an era with increasingly stringent public health goals (e.g., reduction of blood lead safety threshold from 10 to 5 μg/dL), quantifiable health benefits to students were predicted after water lead remediation at two large US school systems. © 2013.

Advancements in the Development of an Operational Lightning Jump Algorithm for GOES-R GLM

NASA Technical Reports Server (NTRS)

Shultz, Chris; Petersen, Walter; Carey, Lawrence

2011-01-01

Rapid increases in total lightning have been shown to precede the manifestation of severe weather at the surface. These rapid increases have been termed lightning jumps, and are the current focus of algorithm development for the GOES-R Geostationary Lightning Mapper (GLM). Recent lightning jump algorithm work has focused on evaluation of algorithms in three additional regions of the country, as well as, markedly increasing the number of thunderstorms in order to evaluate the each algorithm s performance on a larger population of storms. Lightning characteristics of just over 600 thunderstorms have been studied over the past four years. The 2 lightning jump algorithm continues to show the most promise for an operational lightning jump algorithm, with a probability of detection of 82%, a false alarm rate of 35%, a critical success index of 57%, and a Heidke Skill Score of 0.73 on the entire population of thunderstorms. Average lead time for the 2 algorithm on all severe weather is 21.15 minutes, with a standard deviation of +/- 14.68 minutes. Looking at tornadoes alone, the average lead time is 18.71 minutes, with a standard deviation of +/-14.88 minutes. Moreover, removing the 2 lightning jumps that occur after a jump has been detected, and before severe weather is detected at the ground, the 2 lightning jump algorithm s false alarm rate drops from 35% to 21%. Cold season, low topped, and tropical environments cause problems for the 2 lightning jump algorithm, due to their relative dearth in lightning as compared to a supercellular or summertime airmass thunderstorm environment.

A stochastic post-processing method for solar irradiance forecasts derived from NWPs models

NASA Astrophysics Data System (ADS)

Lara-Fanego, V.; Pozo-Vazquez, D.; Ruiz-Arias, J. A.; Santos-Alamillos, F. J.; Tovar-Pescador, J.

2010-09-01

Solar irradiance forecast is an important area of research for the future of the solar-based renewable energy systems. Numerical Weather Prediction models (NWPs) have proved to be a valuable tool for solar irradiance forecasting with lead time up to a few days. Nevertheless, these models show low skill in forecasting the solar irradiance under cloudy conditions. Additionally, climatic (averaged over seasons) aerosol loading are usually considered in these models, leading to considerable errors for the Direct Normal Irradiance (DNI) forecasts during high aerosols load conditions. In this work we propose a post-processing method for the Global Irradiance (GHI) and DNI forecasts derived from NWPs. Particularly, the methods is based on the use of Autoregressive Moving Average with External Explanatory Variables (ARMAX) stochastic models. These models are applied to the residuals of the NWPs forecasts and uses as external variables the measured cloud fraction and aerosol loading of the day previous to the forecast. The method is evaluated for a set one-moth length three-days-ahead forecast of the GHI and DNI, obtained based on the WRF mesoscale atmospheric model, for several locations in Andalusia (Southern Spain). The Cloud fraction is derived from MSG satellite estimates and the aerosol loading from the MODIS platform estimates. Both sources of information are readily available at the time of the forecast. Results showed a considerable improvement of the forecasting skill of the WRF model using the proposed post-processing method. Particularly, relative improvement (in terms of the RMSE) for the DNI during summer is about 20%. A similar value is obtained for the GHI during the winter.

Linear compared to circular stapler anastomosis in laparoscopic Roux-en-Y gastric bypass leads to comparable weight loss with fewer complications: a matched pair study.

PubMed

Schneider, Romano; Gass, Jörn-Markus; Kern, Beatrice; Peters, Thomas; Slawik, Marc; Gebhart, Martina; Peterli, Ralph

2016-05-01

In the course of laparoscopic Roux-en-Y gastric bypass (LRYGB), a tight gastroenterostomy (GE) may lead to higher weight loss but possibly to an increase of local complications such as strictures and ulcers. Different operative techniques for Roux-en-Y reconstruction may also influence the rate of internal hernias, a typical late complication of LRYGB. The objective of this study was to compare weight loss, rates of strictures, internal hernias, and ulcerations of linear versus circular stapler anastomosis. Retrospective analysis of prospectively collected data in a 3:1-matched pair study. A total of 228 patients with a minimal follow-up of 2 years were matched according to BMI at baseline, age, and gender. The follow-up rate was 100 % at 1 and 2 years postoperatively; the mean follow-up time was 3.8 ± 1.63 years. In group C (circular), 57 patients were operated with a 25-mm circular stapler technique (average BMI 44.7 ± 5.18 kg/m(2), age 44.1 ± 10.8 years, 80.7 % female). In group L (linear), 171 patients were operated using a linear stapler (approximately 30 mm, average BMI 43.8 ± 5.24 kg/m(2), age 43.7 ± 12.5 years, 70.8 % female). A propensity score matching and a logrank test were used for statistical analysis. The average excessive BMI loss (EBMIL) after 1 year was not statistically different (70.6 ± 20.2 % in group C vs 72.5 ± 20.4 % in group L) as well as after 2 years (71.6 ± 22.5 % in group C vs 74.6 ± 19.6 % in group L). The average operation time was 155 ± 53 min in group C and 109 ± 57 min in group L (p = 0.0001). In group L, patients had significantly lower overall stricture rates at the GE compared to group C (0 [0 %] vs. 4 [7 %], p = 0.0004), a lower rate and severity of internal hernias (10 [5.8 %] vs. 7 [12.3 %] p = 0.466), and equal local ulcerations rates (3 [1.8 %] vs. 1 [1.8 %] p = 0.912). Linear stapler anastomosis in LRYGB compared to circular anastomosis leads to equal weight loss and less strictures. The lower rate of internal hernias in linear stapler anastomosis was not significantly different.

Investigation of the influence of irradiation with Fe+7 ions on structural properties of AlN ceramics

NASA Astrophysics Data System (ADS)

Kozlovskiy, A.; Dukenbayev, K.; Ivanov, I.; Kozin, S.; Aleksandrenko, V.; Kurakhmedov, A.; Sambaev, E.; Kenzhina, I.; Tosi, D.; Loginov, V.; Zdorovets, M.

2018-06-01

The paper presents the results of investigation of defect formation in AlN ceramics under Fe+7 ion irradiation with a fluence from 1 × 1011 to 1 × 1014 ion cm‑2. The change in the main crystallographic characteristics, the decrease in the magnitude of Griffiths criterion, and the increase in the average voltage as a result of irradiation are caused by the appearance of additional defects in the structure and their further evolution leading to a change in the degree of crystallinity. For samples irradiated with Fe+7 ions to a dose of 1 × 1011 ion cm‑2, the formation of pyramidal hillocks is observed on the surface, whose average height is 17–20 nm. An increase in the irradiation dose leads to an increase in chillocks size and their density. At the same time, at large irradiation doses, the formation of conglomerates of chyllocks and grooves on the samples surface is observed. The change in surface morphology, the formation of chyllocks on the ceramic surface, and the dependence of the change in crystallographic characteristics during irradiation make it possible to unambiguously associate the formation of radiation defects in the structure of the ceramic with energy losses in elastic and inelastic interactions of iron ions with lattice atoms.

Performance and exposure indices of rats exposed to low concentrations of lead.

PubMed

Cory-Slechta, D A; Weiss, B; Cox, C

1985-04-01

To further characterize the lower end of the function relating lead exposure and biological exposure indices to behavior, male weanling rats were exposed chronically to drinking solutions containing 25 ppm sodium acetate (controls) or 25 ppm lead acetate. Behavioral training began when the animals reached 50 days of age, and performance on a fixed-interval 1-min schedule of food reinforcement was then assessed over 90 experimental sessions (136 days). This exposure produced overall response rate increases over the first 40 sessions that were similar to those observed previously with higher concentrations of lead. Response rates of the two groups tended to merge subsequently. The increased overall response rates in the treated group derived primarily from an increased frequency of shorter interresponse times (IRTs) and increased running rates (calculated without the postreinforcement interval). Blood lead (PbB) and zinc protoporphyrin (ZPP) values were determined following sessions 30, 60, and 90. PbB values of the lead-exposed group averaged 15 to 20 micrograms/dl throughout the study; ZPP did not differ. The mean brain lead value of the treated group was 0.07 micrograms Pb/g. Blood-brain ratios (1.38 to 4.06) were substantially greater than those previously observed at higher exposures. These data extend to even lower exposures, and lower blood lead concentrations, the effective concentration for behavioral effects, and further emphasize the importance of the sensitivity of the endpoint in assessing behavioral toxicity.

Nonlinear dynamics of a pulse-coupled neural oscillator model of orientation tuning in the visual cortex

NASA Astrophysics Data System (ADS)

Bressloff, P. C.; Bressloff, N. W.

2000-02-01

Orientation tuning in a ring of pulse-coupled integrate-and-fire (IF) neurons is analyzed in terms of spontaneous pattern formation. It is shown how the ring bifurcates from a synchronous state to a non-phase-locked state whose spike trains are characterized by quasiperiodic variations of the inter-spike intervals (ISIs) on closed invariant circles. The separation of these invariant circles in phase space results in a localized peak of activity as measured by the time-averaged firing rate of the neurons. This generates a sharp orientation tuning curve that can lock to a slowly rotating, weakly tuned external stimulus. For fast synapses, breakup of the quasiperiodic orbits occurs leading to high spike time variability suggestive of chaos.

Predictability of Solar Radiation for Photovoltaics systems over Europe: from short-term to seasonal time-scales

NASA Astrophysics Data System (ADS)

De Felice, Matteo; Petitta, Marcello; Ruti, Paolo

2014-05-01

Photovoltaic diffusion is steadily growing on Europe, passing from a capacity of almost 14 GWp in 2011 to 21.5 GWp in 2012 [1]. Having accurate forecast is needed for planning and operational purposes, with the possibility to model and predict solar variability at different time-scales. This study examines the predictability of daily surface solar radiation comparing ECMWF operational forecasts with CM-SAF satellite measurements on the Meteosat (MSG) full disk domain. Operational forecasts used are the IFS system up to 10 days and the System4 seasonal forecast up to three months. Forecast are analysed considering average and variance of errors, showing error maps and average on specific domains with respect to prediction lead times. In all the cases, forecasts are compared with predictions obtained using persistence and state-of-art time-series models. We can observe a wide range of errors, with the performance of forecasts dramatically affected by orography and season. Lower errors are on southern Italy and Spain, with errors on some areas consistently under 10% up to ten days during summer (JJA). Finally, we conclude the study with some insight on how to "translate" the error on solar radiation to error on solar power production using available production data from solar power plants. [1] EurObserver, "Baromètre Photovoltaïque, Le journal des énergies renouvables, April 2012."

An automated metrics system to measure and improve the success of laboratory automation implementation.

PubMed

Benn, Neil; Turlais, Fabrice; Clark, Victoria; Jones, Mike; Clulow, Stephen

2007-03-01

The authors describe a system for collecting usage metrics from widely distributed automation systems. An application that records and stores usage data centrally, calculates run times, and charts the data was developed. Data were collected over 20 months from at least 28 workstations. The application was used to plot bar charts of date versus run time for individual workstations, the automation in a specific laboratory, or automation of a specified type. The authors show that revised user training, redeployment of equipment, and running complimentary processes on one workstation can increase the average number of runs by up to 20-fold and run times by up to 450%. Active monitoring of usage leads to more effective use of automation. Usage data could be used to determine whether purchasing particular automation was a good investment.

Real-time adaptive optics testbed to investigate point-ahead angle in pre-compensation of Earth-to-GEO optical communication.

PubMed

Leonhard, Nina; Berlich, René; Minardi, Stefano; Barth, Alexander; Mauch, Steffen; Mocci, Jacopo; Goy, Matthias; Appelfelder, Michael; Beckert, Erik; Reinlein, Claudia

2016-06-13

We explore adaptive optics (AO) pre-compensation for optical communication between Earth and geostationary (GEO) satellites in a laboratory experiment. Thus, we built a rapid control prototyping breadboard with an adjustable point-ahead angle where downlink and uplink can operate both at 1064 nm and 1550 nm wavelength. With our real-time system, beam wander resulting from artificial turbulence was reduced such that the beam hits the satellite at least 66% of the time as compared to merely 3% without correction. A seven-fold increase of the average Strehl ratio to (28 ± 15)% at 18 μrad point-ahead angle leads to a considerable reduction of the calculated fading probability. These results make AO pre-compensation a viable technique to enhance Earth-to-GEO optical communication.

40 CFR 60.2943 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2010 CFR

2010-07-01

... averages into the appropriate averaging times and units? 60.2943 Section 60.2943 Protection of Environment... SOURCES Operator Training and Qualification Monitoring § 60.2943 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.2975 to calculate...

40 CFR 60.2943 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2012 CFR

2012-07-01

... averages into the appropriate averaging times and units? 60.2943 Section 60.2943 Protection of Environment... SOURCES Operator Training and Qualification Monitoring § 60.2943 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.2975 to calculate...

40 CFR 60.2943 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2011 CFR

2011-07-01

... averages into the appropriate averaging times and units? 60.2943 Section 60.2943 Protection of Environment... SOURCES Operator Training and Qualification Monitoring § 60.2943 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.2975 to calculate...

Using remote sensing environmental data to forecast malaria incidence at a rural district hospital in Western Kenya.

PubMed

Sewe, Maquins Odhiambo; Tozan, Yesim; Ahlm, Clas; Rocklöv, Joacim

2017-06-01

Malaria surveillance data provide opportunity to develop forecasting models. Seasonal variability in environmental factors correlate with malaria transmission, thus the identification of transmission patterns is useful in developing prediction models. However, with changing seasonal transmission patterns, either due to interventions or shifting weather seasons, traditional modelling approaches may not yield adequate predictive skill. Two statistical models,a general additive model (GAM) and GAMBOOST model with boosted regression were contrasted by assessing their predictive accuracy in forecasting malaria admissions at lead times of one to three months. Monthly admission data for children under five years with confirmed malaria at the Siaya district hospital in Western Kenya for the period 2003 to 2013 were used together with satellite derived data on rainfall, average temperature and evapotranspiration(ET). There was a total of 8,476 confirmed malaria admissions. The peak of malaria season changed and malaria admissions reduced overtime. The GAMBOOST model at 1-month lead time had the highest predictive skill during both the training and test periods and thus can be utilized in a malaria early warning system.

Single incision laparoscopic surgery for appendicectomy: a retrospective comparative analysis.

PubMed

Chow, Andre; Purkayastha, Sanjay; Nehme, Jean; Darzi, Lord Ara; Paraskeva, Paraskevas

2010-10-01

Single incision laparoscopic surgery (SILS) may further reduce the trauma of surgery leading to reduced port site complications and postoperative pain. The improved cosmetic result also may lead to improved patient satisfaction with surgery. Data were prospectively collected and retrospectively analyzed for all patients who underwent SILS appendicectomy at our institution and were compared with those who had undergone conventional laparoscopic appendicectomy during the same time period. This included patient demographic data, intraoperative, and postoperative outcomes. Thirty-three patients underwent conventional laparoscopic appendicectomy and 40 patients underwent SILS appendicectomy between January 26, 2008 and July 14, 2009. Operative time was shorter with SILS appendicectomy compared with conventional laparoscopic appendicectomy (p < 0.05). No patients in the SILS appendicectomy group required conversion to open surgery compared with two patients in the conventional laparoscopic appendicectomy group. Patients stayed an average of 1.36 days after SILS appendicectomy, and 2.36 days after conventional laparoscopic appendicectomy. SILS appendicectomy seems to be a safe and efficacious technique. Further work in the form of randomized studies is required to investigate any significant advantages of this new and attractive technique.

VARIATIONS AT A QUANTITATIVE TRAIT LOCUS (QTL) AFFECT DEVELOPMENT OF BEHAVIOR IN LEAD-EXPOSED DROSOPHILA MELANOGASTER

PubMed Central

Hirsch, Helmut V. B.; Possidente, Debra; Averill, Sarah; Despain, Tamira Palmetto; Buytkins, Joel; Thomas, Valerie; Goebel, W. Paul; Shipp-Hilts, Asante; Wilson, Diane; Hollocher, Kurt; Possidente, Bernard; Lnenicka, Greg; Ruden, Douglas M.

2009-01-01

We developed Drosophila melanogaster as a model to study correlated behavioral, neuronal and genetic effects of the neurotoxin lead, known to affect cognitive and behavioral development in children. We showed that, as in vertebrates, lead affects both synaptic development and complex behaviors (courtship, fecundity, locomotor activity) in Drosophila. By assessing differential behavioral responses to developmental lead exposure among recombinant inbred Drosophila lines (RI), derived from parental lines Oregon R and Russian 2b, we have now identified a genotype by environment interaction (GEI) for a behavioral trait affected by lead. Drosophila Activity Monitors (TriKinetics, Waltham, MA), which measure activity by counting the number of times a single fly in a small glass tube walks through an infrared beam aimed at the middle of the tube, were used to measure activity of flies, reared from eggs to 4 days of adult age on either control or lead-contaminated medium, from each of 75 RI lines. We observed a significant statistical association between the effect of lead on average daytime activity across lines and one marker locus, 30AB, on chromosome 2; we define this as a Quantitative Trait Locus (QTL) associated with behavioral effects of developmental lead exposure. When 30AB was from Russian 2b, lead significantly increased locomotor activity, whereas, when 30AB was from Oregon R, lead decreased it. 30AB contains about 125 genes among which are likely “candidate genes” for the observed lead-dependent behavioral changes. Drosophila are thus a useful, underutilized model for studying behavioral, synaptic and genetic changes following chronic exposure to lead or other neurotoxins during development. PMID:19428504

Lead and Conduct Problems: A Meta-Analysis

ERIC Educational Resources Information Center

Marcus, David K.; Fulton, Jessica J.; Clarke, Erin J.

2010-01-01

This meta-analysis examined the association between conduct problems and lead exposure. Nineteen studies on 8,561 children and adolescents were included. The average "r" across all 19 studies was 0.19 (p less than 0.001), which is considered a medium effect size. Studies that assessed lead exposure using hair element analysis yielded…

Lead Water Pipes and Infant Mortality at the Turn of the Twentieth Century

ERIC Educational Resources Information Center

Troesken, Werner

2008-01-01

In 1897, about half of all American municipalities used lead pipes to distribute water. Employing data from Massachusetts, this paper compares infant death rates in cities that used lead water pipes to rates in cities that used nonlead pipes. In the average town in 1900, the use of lead pipes increased infant mortality by 25 to 50 percent.…

Simulation of streamflow and water quality in the Leon Creek watershed, Bexar County, Texas, 1997-2004

USGS Publications Warehouse

Ockerman, Darwin J.; Roussel, Meghan C.

2009-01-01

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers and the San Antonio River Authority, configured, calibrated, and tested a Hydrological Simulation Program ? FORTRAN watershed model for the approximately 238-square-mile Leon Creek watershed in Bexar County, Texas, and used the model to simulate streamflow and water quality (focusing on loads and yields of selected constituents). Streamflow in the model was calibrated and tested with available data from five U.S. Geological Survey streamflow-gaging stations for 1997-2004. Simulated streamflow volumes closely matched measured streamflow volumes at all streamflow-gaging stations. Total simulated streamflow volumes were within 10 percent of measured values. Streamflow volumes are greatly influenced by large storms. Two months that included major floods accounted for about 50 percent of all the streamflow measured at the most downstream gaging station during 1997-2004. Water-quality properties and constituents (water temperature, dissolved oxygen, suspended sediment, dissolved ammonia nitrogen, dissolved nitrate nitrogen, and dissolved and total lead and zinc) in the model were calibrated using available data from 13 sites in and near the Leon Creek watershed for varying periods of record during 1992-2005. Average simulated daily mean water temperature and dissolved oxygen at the most downstream gaging station during 1997-2000 were within 1 percent of average measured daily mean water temperature and dissolved oxygen. Simulated suspended-sediment load at the most downstream gaging station during 2001-04 (excluding July 2002 because of major storms) was 77,700 tons compared with 74,600 tons estimated from a streamflow-load regression relation (coefficient of determination = .869). Simulated concentrations of dissolved ammonia nitrogen and dissolved nitrate nitrogen closely matched measured concentrations after calibration. At the most downstream gaging station, average simulated monthly mean concentrations of dissolved ammonia and nitrate concentrations during 1997-2004 were 0.03 and 0.37 milligram per liter, respectively. For the most downstream station, the measured and simulated concentrations of dissolved and total lead and zinc for stormflows during 1993-97 after calibration do not match particularly closely. For base-flow conditions during 1997-2004 at the most downstream station, the simulated/measured match is better. For example, median simulated concentration of total lead (for 2,041 days) was 0.96 microgram per liter, and median measured concentration (for nine samples) of total lead was 1.0 microgram per liter. To demonstrate an application of the Leon Creek watershed model, streamflow constituent loads and yields for suspended sediment, dissolved nitrate nitrogen, and total lead were simulated at the mouth of Leon Creek (outlet of the watershed) for 1997-2004. The average suspended-sediment load was 51,800 tons per year. The average suspended-sediment yield was 0.34 ton per acre per year. The average load of dissolved nitrate at the outlet of the watershed was 802 tons per year. The corresponding yield was 10.5 pounds per acre per year. The average load of lead at the outlet was 3,900 pounds per year. The average lead yield was 0.026 pound per acre per year. The degree to which available rainfall data represent actual rainfall is potentially the most serious source of measurement error associated with the Leon Creek model. Major storms contribute most of the streamflow loads for certain constituents. For example, the three largest stormflows contributed about 64 percent of the entire suspended-sediment load at the most downstream station during 1997-2004.

Schrödinger propagation of initial discontinuities leads to divergence of moments

NASA Astrophysics Data System (ADS)

Marchewka, A.; Schuss, Z.

2009-09-01

We show that the large phase expansion of the Schrödinger propagation of an initially discontinuous wave function leads to the divergence of average energy, momentum, and displacement, rendering them unphysical states. If initially discontinuous wave functions are considered to be approximations to continuous ones, the determinant of the spreading rate of these averages is the maximal gradient of the initial wave function. Therefore a dilemma arises between the inclusion of discontinuous wave functions in quantum mechanics and the requirement of finite moments.

Trends in mortality differentials and life expectancy for male social security-covered workers, by socioeconomic status.

PubMed

Waldron, Hilary

2007-01-01

This article presents an analysis of trends in mortality differentials and life expectancy by average relative earnings for male Social Security-covered workers aged 60 or older. Because average relative earnings are measured at the peak of the earnings distribution (ages 45-55), it is assumed that they act as a rough proxy for socioeconomic status. The historical literature reviewed in this analysis generally indicates that mortality differentials by socioeconomic status have not been constant over time. For this study, time trends are examined by observing how mortality differentials by average relative earnings have been changing over 29 years of successive birth cohorts that encompass roughly the first third of the 20th century. Deaths for these birth cohorts are observed at ages 60-89 from 1972 through 2001, encompassing roughly the last third of the 20th century. The large size and long span of death observations allow for disaggregation by age and year-of-birth groups in the estimation of mortality differentials by socioeconomic status. This study finds a difference in both the level and the rate of change in mortality improvement over time by socioeconomic status for male Social Security-covered workers. Average relative earnings (measured as the relative average positive earnings of an individual between ages 45 and 55) are used as a proxy for adult socioeconomic status. In general, for birth cohorts spanning the years 1912-1941 (or deaths spanning the years 1972-2001 at ages 60-89), the top half of the average relative earnings distribution has experienced faster mortality improvement than has the bottom half. Specifically, male Social Security-covered workers born in 1941 who had average relative earnings in the top half of the earnings distribution and who lived to age 60 would be expected to live 5.8 more years than their counterparts in the bottom half. In contrast, among male Social Security-covered workers born in 1912 who survived to age 60, those in the top half of the earnings distribution would be expected to live only 1.2 years more than those in the bottom half. The life expectancy estimates in this article represent one possible outcome under one set of assumptions. These projections should not be regarded as an accurate depiction of the future. Specifically, this study adopts a simple projection method in which differentials are assumed to follow the pattern observed over the last 30 years of the 20th century for the first 30 years of the 21st century. This assumption lacks theoretical underpinnings because the causes of the widening differentials observed over the past 30 years have not been determined. On the one hand, if the trend of widening mortality differentials by year of birth observed over the past 30 years does not continue, the projection method used in this analysis could lead to an overestimation of future differences in life expectancy between socioeconomic groups. On the other hand, if mortality differentials do not narrow by age as observed in the past, the projection method used could lead to an underestimation of the differences in life expectancy between socioeconomic groups aged 60 or older.

40 CFR 60.3042 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2012 CFR

2012-07-01

... averages into the appropriate averaging times and units? 60.3042 Section 60.3042 Protection of Environment... Construction On or Before December 9, 2004 Model Rule-Monitoring § 60.3042 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.3076 to...

40 CFR 60.3042 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2010 CFR

2010-07-01

... averages into the appropriate averaging times and units? 60.3042 Section 60.3042 Protection of Environment... Construction On or Before December 9, 2004 Model Rule-Monitoring § 60.3042 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.3076 to...

40 CFR 60.3042 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2013 CFR

2013-07-01

... averages into the appropriate averaging times and units? 60.3042 Section 60.3042 Protection of Environment... Construction On or Before December 9, 2004 Model Rule-Monitoring § 60.3042 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.3076 to...

40 CFR 60.3042 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2011 CFR

2011-07-01

... averages into the appropriate averaging times and units? 60.3042 Section 60.3042 Protection of Environment... Construction On or Before December 9, 2004 Model Rule-Monitoring § 60.3042 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.3076 to...

40 CFR 60.3042 - How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?

Code of Federal Regulations, 2014 CFR

2014-07-01

... averages into the appropriate averaging times and units? 60.3042 Section 60.3042 Protection of Environment... Construction On or Before December 9, 2004 Model Rule-Monitoring § 60.3042 How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units? (a) Use Equation 1 in § 60.3076 to...

Environmental contamination in an Australian mining community and potential influences on early childhood health and behavioural outcomes.

PubMed

Dong, Chenyin; Taylor, Mark Patrick; Kristensen, Louise Jane; Zahran, Sammy

2015-12-01

Arsenic, cadmium and lead in aerosols, dusts and surface soils from Australia's oldest continuous lead mining town of Broken Hill were compared to standardised national childhood developmental (year 1) and education performance measures (years 3,5,7,9). Contaminants close to mining operations were elevated with maximum lead levels in soil: 8900 mg/kg; dust wipe: 86,061 μg/m(2); dust deposition: 2950 μg/m(2)/day; aerosols: 0.707 μg/m(3). The proportion of children from Broken Hill central, the area with the highest environmental contamination, presented with vulnerabilities in two or more developmental areas at 2.6 times the national average. Compared with other school catchments of Broken Hill, children in years 3 and 5 from the most contaminated school catchment returned consistently the lowest educational scores. By contrast, children living and attending schools associated with lower environmental contamination levels recorded higher school scores and lower developmental vulnerabilities. Similar results were identified in Australia's two other major lead mining and smelting cities of Port Pirie and Mount Isa. Copyright © 2015 Elsevier Ltd. All rights reserved.

Near-Earth Reconnection Ejecta at Lunar Distances

NASA Astrophysics Data System (ADS)

Runov, A.; Angelopoulos, V.; Artemyev, A.; Lu, S.; Zhou, X.-Z.

2018-04-01

Near-Earth magnetotail reconnection leads to formation of earthward and tailward directed plasma outflows with an increased north-south magnetic field strength(|Bz|) at their leading edges. We refer to these regions of enhanced |Bz| and magnetic flux transport Ey as reconnection ejecta. They are composed of what have been previously referred to as earthward dipolarizing flux bundles (DFBs) and tailward rapid flux transport (RFT) events. Using two-point observations of magnetic and electric fields and particle fluxes by the Acceleration, Reconnection, Turbulence, and Electrodynamics of Moon's Interaction with the Sun probes orbiting around Moon at geocentric distances R ˜ 60RE, we statistically studied plasma moments and particle energy spectra in RFTs and compared them with those observed within DFBs in the near-Earth plasma sheet by the Time History of Events and Macroscale Interactions during Substorms probes. We found that the ion average temperatures and spectral slopes in RFTs at R ˜ 60RE are close to those in DFBs observed at 15 < R < 25RE, just earthward of the probable reconnection region location. Assuming plasma sheet pressure balance, the average RFT ion temperature corresponds to a lobe field BL˜20 nT. This leads us to suggest that the ion population within the tailward ejecta originated in the midtail plasma sheet at 20≤R≤30RE and propagated to the Acceleration, Reconnection, Turbulence, and Electrodynamics of Moon's Interaction with the Sun location without undergoing any further energy gain. Conversely, electron temperatures in DFBs at 15 < R < 25RE are a factor of 2.5 higher than those in RFTs at R ˜ 60RE.

Is it Time for a Sudden Infant Death Syndrome (SIDS) Awareness Campaign? Community Stakeholders' Perceptions of SIDS.

PubMed

Gollenberg, Audra; Fendley, Kim

2018-01-01

Sudden infant death syndrome (SIDS) remains a leading cause of infant death in the United States and in Virginia, the SIDS rate is higher than the national average. We sought to gauge the perceptions among community-identified stakeholders as to community resource needs to reduce SIDS. We used snowball sampling to identify important community stakeholders to be interviewed as key informants. A semi-structured interview lasting 45 min-2 hours was delivered to determine resource needs to reduce SIDS, and whether high-risk community members were aware of SIDS risk factors among stakeholders representing a variety of disciplines. Interviews were conducted in two geographic areas with higher than average rates of infant mortality, an urban district, Winchester City, VA and a rural district, Page County, VA. A total of 74 interviews were completed with stakeholders in healthcare, health departments, social services, law enforcement, education/childcare, faith-based institutions, non-profit agencies and non-affiliated community members. The majority of respondents perceive that high-risk community members are not aware of factors that can lead to SIDS (50%). Participants suggested that more "education" is needed to further reduce the rates of SIDS in their communities (73%). Respondents detailed that more pervasive, strategic, and multi-channeled education is necessary to reduce cases of SIDS. Community leaders perceive that high-risk community members are not fully aware of risk factors that can lead to SIDS. Maternal/child health stakeholders in these Virginia locales suggested more community-based education as a potential solution to SIDS.

[Evaluation of cadmium, mercury and lead intake with reproduced weekly food rations].

PubMed

Marzec, Z; Buliński, R

1991-01-01

In Lublin, Olsztyn, Poznań, Warszawa and Wrocław, weekly food rations characteristic of families other than those of manual workers, with medium incomes, were reproduced. Food rations comprised ca. 90 food products whose average weekly intakes were established consistently with the results of questionnaires of the Chief Census Bureau. Namely, from these results we calculated and prepared the average weekly food rations (from 11 470 g to 14 732 g), in which cadmium, mercury and lead were assayed by the ASA method. These average food rations afforded weekly intakes of 105-147 micrograms Cd, 441-931 micrograms Pb and 50.5-119.0 micrograms Hg. According to these results, the average food rations from the above-mentioned cities are moderately contaminated with the heavy metals tested, because in no case 50% of the provisional tolerable weekly intake (PTWI) were exceeded. The present results are lower than those obtained in the same year for families of manual workers; this is probably due to the fact that in the families of manual workers, as compared with other families, the weight of meals is usually higher. It is noteworthy that in the cities with greater numbers of industrial plants the contents of the metals tested, particularly of mercury and lead, in food are higher.

Lifetime exposure to low doses of lead in rats: effect on selected parameters of carbohydrate metabolism.

PubMed

Nováková, Jaroslava; Lukačínová, Agnesa; Lovásová, Eva; Cimboláková, Iveta; Rácz, Oliver; Ništiar, František

2015-05-01

The aim of the study was to assess the effects of exposure to low doses of lead dissolved in drinking water (average daily dose of 2.2 mg kg(-1) day(-1)) on selected carbohydrate metabolism parameters in 20 wistar rats. Animals were divided into two groups - control (C) (group drinking clear water) and experimental group (Pb; group exposed to low doses of lead acetate in a concentration of 100 μmol l(-1) of drinking water). In this study, we studied the biochemical parameters (glucose, haemoglobin (Hb), glycated haemoglobin (HbA1c), lactate dehydrogenase (LDH) and amylase (AMS)) in rat blood. Glucose and Hb concentration and AMS activity decreased, LDH activity increased but HbA1c concentration levels did not change in rats exposed to lead. Our results well documented that lifetime exposure to lead affected carbohydrate metabolism of rats. Some parameters like concentration of Hb as well as activities of AMS and LDH are useful markers of intoxication of rats with lead. For the evaluation of results (e.g. AMS), not only the data at the end of the experiment should be taken into account but also the entire duration of trials (i.e. more time steps) that makes results more objective should be considered. © The Author(s) 2013.

Scale-invariant Green-Kubo relation for time-averaged diffusivity

NASA Astrophysics Data System (ADS)

Meyer, Philipp; Barkai, Eli; Kantz, Holger

2017-12-01

In recent years it was shown both theoretically and experimentally that in certain systems exhibiting anomalous diffusion the time- and ensemble-averaged mean-squared displacement are remarkably different. The ensemble-averaged diffusivity is obtained from a scaling Green-Kubo relation, which connects the scale-invariant nonstationary velocity correlation function with the transport coefficient. Here we obtain the relation between time-averaged diffusivity, usually recorded in single-particle tracking experiments, and the underlying scale-invariant velocity correlation function. The time-averaged mean-squared displacement is given by 〈δ2¯〉 ˜2 DνtβΔν -β , where t is the total measurement time and Δ is the lag time. Here ν is the anomalous diffusion exponent obtained from ensemble-averaged measurements 〈x2〉 ˜tν , while β ≥-1 marks the growth or decline of the kinetic energy 〈v2〉 ˜tβ . Thus, we establish a connection between exponents that can be read off the asymptotic properties of the velocity correlation function and similarly for the transport constant Dν. We demonstrate our results with nonstationary scale-invariant stochastic and deterministic models, thereby highlighting that systems with equivalent behavior in the ensemble average can differ strongly in their time average. If the averaged kinetic energy is finite, β =0 , the time scaling of 〈δ2¯〉 and 〈x2〉 are identical; however, the time-averaged transport coefficient Dν is not identical to the corresponding ensemble-averaged diffusion constant.

Role of intraoperative varus stress test for lateral soft tissue release during chevron bunion procedure.

PubMed

Kim, Hyong-Nyun; Suh, Dong-Hyun; Hwang, Pil-Sung; Yu, Sun-O; Park, Yong-Wook

2011-04-01

The purpose of this study was to evaluate the clinical results of distal chevron osteotomy performed in conjunction with selective lateral soft tissue release. The criterion for doing a lateral soft tissue release was assessed by determining the ease and completeness of passive hallux valgus correction at the time of surgery. Between August 2005 and November 2007, 48 feet in 43 patients classified as having mild to moderate hallux valgus were retrospectively studied. Distal chevron osteotomy without lateral soft tissue release was performed in 26 cases (Group 1) when passive correction of the hallux valgus deformity was possible. Distal chevron osteotomy with lateral soft tissue release was performed in 22 cases (Group 2) when passive correction was not possible. Average followup was 23 (range, 12 to 28) months. Clinical results were assessed using radiographic parameters [hallux valgus angle (HVA), first and second intermetatarsal angle (1,2 IMA)], AOFAS scale and patient's subjective satisfaction. For Group 1: the average correction of HVA was 12.8 degrees, the average correction of IMA was 4.7 degrees, and the AOFAS score improved an average of 29.2 points at the last followup. Thirteen patients were very satisfied and ten patients were satisfied with the results. No patient was dissatisfied. For Group 2: the average correction of HVA was 19.1 degrees, the average correction of IMA was 7 degrees and AOFAS score improved at an average of 31.8 points at the last followup. Twelve patients were very satisfied, seven patients were satisfied and one patient, who had stiffness of the first metatarsophalangeal joint, was dissatisfied with the result. Distal chevron osteotomy with selective lateral soft tissue release based on the ability to passively correct the hallux valgus deformity lead to safe and stable correction.

Global Increase in UV Irradiance during the Past 30 Years (1979-2008) Estimated from Satellite Data

NASA Technical Reports Server (NTRS)

Herman, Jay R.

2010-01-01

Zonal average ultraviolet irradiance (flux ultraviolet, F(sub uv)) reaching the Earth's surface has significantly increased since 1979 at all latitudes except the equatorial zone. Changes are estimated in zonal average F(sub uv) caused by ozone and cloud plus aerosol reflectivity using an approach based on Beer's law for monochromatic and action spectrum weighted irradiances. For four different cases, it is shown that Beer's Law leads to a power law form similar to that applied to erythemal action spectrum weighted irradiances. Zonal and annual average increases in F(sub uv) were caused by decreases in ozone amount from 1979 to 1998. After 1998, midlatitude annual average ozone amounts and UV irradiance levels have been approximately constant. In the Southern Hemisphere, zonal and annual average UV increase is partially offset by tropospheric cloud and aerosol transmission decreases (hemispherical dimming), and to a lesser extent in the Northern Hemisphere. Ozone and 340 nm reflectivity changes have been obtained from multiple joined satellite time series from 1978 to 2008. The largest zonal average increases in F(sub uv) have occurred in the Southern Hemisphere. For clear-sky conditions at 50 S, zonal average F(sub uv) changes are estimated (305 nm, 23%; erythemal, 8.5%; 310 nm, 10%; vitamin D production, 12%). These are larger than at 50 N (305 nm, 9%; erythemal, 4%; 310 nm, 4%; vitamin D production, 6%). At the latitude of Buenos Aires, Argentina (34.6 S), the clear-sky Fuv increases are comparable to the increases near Washington, D. C. (38.9 N): 305 nm, 9% and 7%; erythemal, 6% and 4%; and vitamin D production, 7% and 5%, respectively.

Spectral analysis of 87-lead body surface signal-averaged ECGs in patients with previous anterior myocardial infarction as a marker of ventricular tachycardia.

PubMed

Hosoya, Y; Kubota, I; Shibata, T; Yamaki, M; Ikeda, K; Tomoike, H

1992-06-01

There were few studies on the relation between the body surface distribution of high- and low-frequency components within the QRS complex and ventricular tachycardia (VT). Eighty-seven signal-averaged ECGs were obtained from 30 normal subjects (N group) and 30 patients with previous anterior myocardial infarction (MI) with VT (MI-VT[+] group, n = 10) or without VT (MI-VT[-] group, n = 20). The onset and offset of the QRS complex were determined from 87-lead root mean square values computed from the averaged (but not filtered) ECG waveforms. Fast Fourier transform analysis was performed on signal-averaged ECG. The resulting Fourier coefficients were attenuated by use of the transfer function, and then inverse transform was done with five frequency ranges (0-25, 25-40, 40-80, 80-150, and 150-250 Hz). From the QRS onset to the QRS offset, the time integration of the absolute value of reconstructed waveforms was calculated for each of the five frequency ranges. The body surface distributions of these areas were expressed as QRS area maps. The maximal values of QRS area maps were compared among the three groups. In the frequency ranges of 0-25 and 150-250 Hz, there were no significant differences in the maximal values among these three groups. Both MI groups had significantly smaller maximal values of QRS area maps in the frequency ranges of 25-40 and 40-80 Hz compared with the N group. The MI-VT(+) group had significantly smaller maximal values in the frequency ranges of 40-80 and 80-150 Hz than the MI-VT(-) group. These three groups were clearly differentiated by the maximal values of the 40-80-Hz QRS area map. It was suggested that the maximal value of the 40-80-Hz QRS area map was a new marker for VT after anterior MI.

Forecasting Kp from solar wind data: input parameter study using 3-hour averages and 3-hour range values

NASA Astrophysics Data System (ADS)

Wintoft, Peter; Wik, Magnus; Matzka, Jürgen; Shprits, Yuri

2017-11-01

We have developed neural network models that predict Kp from upstream solar wind data. We study the importance of various input parameters, starting with the magnetic component Bz, particle density n, and velocity V and then adding total field B and the By component. As we also notice a seasonal and UT variation in average Kp we include functions of day-of-year and UT. Finally, as Kp is a global representation of the maximum range of geomagnetic variation over 3-hour UT intervals we conclude that sudden changes in the solar wind can have a big effect on Kp, even though it is a 3-hour value. Therefore, 3-hour solar wind averages will not always appropriately represent the solar wind condition, and we introduce 3-hour maxima and minima values to some degree address this problem. We find that introducing total field B and 3-hour maxima and minima, derived from 1-minute solar wind data, have a great influence on the performance. Due to the low number of samples for high Kp values there can be considerable variation in predicted Kp for different networks with similar validation errors. We address this issue by using an ensemble of networks from which we use the median predicted Kp. The models (ensemble of networks) provide prediction lead times in the range 20-90 min given by the time it takes a solar wind structure to travel from L1 to Earth. Two models are implemented that can be run with real time data: (1) IRF-Kp-2017-h3 uses the 3-hour averages of the solar wind data and (2) IRF-Kp-2017 uses in addition to the averages, also the minima and maxima values. The IRF-Kp-2017 model has RMS error of 0.55 and linear correlation of 0.92 based on an independent test set with final Kp covering 2 years using ACE Level 2 data. The IRF-Kp-2017-h3 model has RMSE = 0.63 and correlation = 0.89. We also explore the errors when tested on another two-year period with real-time ACE data which gives RMSE = 0.59 for IRF-Kp-2017 and RMSE = 0.73 for IRF-Kp-2017-h3. The errors as function of Kp and for different years are also studied.

The effect of flow data resolution on sediment yield estimation and channel design

NASA Astrophysics Data System (ADS)

Rosburg, Tyler T.; Nelson, Peter A.; Sholtes, Joel S.; Bledsoe, Brian P.

2016-07-01

The decision to use either daily-averaged or sub-daily streamflow records has the potential to impact the calculation of sediment transport metrics and stream channel design. Using bedload and suspended load sediment transport measurements collected at 138 sites across the United States, we calculated the effective discharge, sediment yield, and half-load discharge using sediment rating curves over long time periods (median record length = 24 years) with both daily-averaged and sub-daily streamflow records. A comparison of sediment transport metrics calculated with both daily-average and sub-daily stream flow data at each site showed that daily-averaged flow data do not adequately represent the magnitude of high stream flows at hydrologically flashy sites. Daily-average stream flow data cause an underestimation of sediment transport and sediment yield (including the half-load discharge) at flashy sites. The degree of underestimation was correlated with the level of flashiness and the exponent of the sediment rating curve. No consistent relationship between the use of either daily-average or sub-daily streamflow data and the resultant effective discharge was found. When used in channel design, computed sediment transport metrics may have errors due to flow data resolution, which can propagate into design slope calculations which, if implemented, could lead to unwanted aggradation or degradation in the design channel. This analysis illustrates the importance of using sub-daily flow data in the calculation of sediment yield in urbanizing or otherwise flashy watersheds. Furthermore, this analysis provides practical charts for estimating and correcting these types of underestimation errors commonly incurred in sediment yield calculations.

A straightforward method to compute average stochastic oscillations from data samples.

PubMed

Júlvez, Jorge

2015-10-19

Many biological systems exhibit sustained stochastic oscillations in their steady state. Assessing these oscillations is usually a challenging task due to the potential variability of the amplitude and frequency of the oscillations over time. As a result of this variability, when several stochastic replications are averaged, the oscillations are flattened and can be overlooked. This can easily lead to the erroneous conclusion that the system reaches a constant steady state. This paper proposes a straightforward method to detect and asses stochastic oscillations. The basis of the method is in the use of polar coordinates for systems with two species, and cylindrical coordinates for systems with more than two species. By slightly modifying these coordinate systems, it is possible to compute the total angular distance run by the system and the average Euclidean distance to a reference point. This allows us to compute confidence intervals, both for the average angular speed and for the distance to a reference point, from a set of replications. The use of polar (or cylindrical) coordinates provides a new perspective of the system dynamics. The mean trajectory that can be obtained by averaging the usual cartesian coordinates of the samples informs about the trajectory of the center of mass of the replications. In contrast to such a mean cartesian trajectory, the mean polar trajectory can be used to compute the average circular motion of those replications, and therefore, can yield evidence about sustained steady state oscillations. Both, the coordinate transformation and the computation of confidence intervals, can be carried out efficiently. This results in an efficient method to evaluate stochastic oscillations.

40 CFR 421.252 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold and... monthly average mg/troy ounce of silver reduced in solution Lead 0.168 0.080 Mercury 0.100 0.040 Silver 0... property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold refined electrolytically...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

Mapping current fluctuations of stochastic pumps to nonequilibrium steady states.

PubMed

Rotskoff, Grant M

2017-03-01

We show that current fluctuations in a stochastic pump can be robustly mapped to fluctuations in a corresponding time-independent nonequilibrium steady state. We thus refine a recently proposed mapping so that it ensures equivalence of not only the averages, but also optimal representation of fluctuations in currents and density. Our mapping leads to a natural decomposition of the entropy production in stochastic pumps similar to the "housekeeping" heat. As a consequence of the decomposition of entropy production, the current fluctuations in weakly perturbed stochastic pumps are shown to satisfy a universal bound determined by the steady state entropy production.

Nonequilibrium transition and pattern formation in a linear reaction-diffusion system with self-regulated kinetics

NASA Astrophysics Data System (ADS)

Paul, Shibashis; Ghosh, Shyamolina; Ray, Deb Shankar

2018-02-01

We consider a reaction-diffusion system with linear, stochastic activator-inhibitor kinetics where the time evolution of concentration of a species at any spatial location depends on the relative average concentration of its neighbors. This self-regulating nature of kinetics brings in spatial correlation between the activator and the inhibitor. An interplay of this correlation in kinetics and disparity of diffusivities of the two species leads to symmetry breaking non-equilibrium transition resulting in stationary pattern formation. The role of initial noise strength and the linear reaction terms has been analyzed for pattern selection.

Oscillating-Coolant Heat Exchanger

NASA Technical Reports Server (NTRS)

Scotti, Stephen J.; Blosser, Max L.; Camarda, Charles J.

1992-01-01

Devices useful in situations in which heat pipes inadequate. Conceptual oscillating-coolant heat exchanger (OCHEX) transports heat from its hotter portions to cooler portions. Heat transported by oscillation of single-phase fluid, called primary coolant, in coolant passages. No time-averaged flow in tubes, so either heat removed from end reservoirs on every cycle or heat removed indirectly by cooling sides of channels with another coolant. Devices include leading-edge cooling devices in hypersonic aircraft and "frost-free" heat exchangers. Also used in any situation in which heat pipe used and in other situations in which heat pipes not usable.

An atomic clock with 10(-18) instability.

PubMed

Hinkley, N; Sherman, J A; Phillips, N B; Schioppo, M; Lemke, N D; Beloy, K; Pizzocaro, M; Oates, C W; Ludlow, A D

2013-09-13

Atomic clocks have been instrumental in science and technology, leading to innovations such as global positioning, advanced communications, and tests of fundamental constant variation. Timekeeping precision at 1 part in 10(18) enables new timing applications in relativistic geodesy, enhanced Earth- and space-based navigation and telescopy, and new tests of physics beyond the standard model. Here, we describe the development and operation of two optical lattice clocks, both using spin-polarized, ultracold atomic ytterbium. A measurement comparing these systems demonstrates an unprecedented atomic clock instability of 1.6 × 10(-18) after only 7 hours of averaging.

Stress hysteresis as the cause of persistent holes in particulate suspensions

NASA Astrophysics Data System (ADS)

Deegan, Robert D.

2010-03-01

Concentrated particulate suspensions under vibrations can support stable, localized, vertically oriented free surfaces. The most robust of these structures are persistent holes: deep and stable depressions of the interface. Using a reduced model of the hydrodynamics we show that a rheology with hysteresis can lead to motion opposite to the time-averaged applied force. Moreover, we show experimentally that particulate suspensions of cornstarch in water exhibits hysteresis in the shear-rate response to an applied sinusoidal stress. The results of our model and our experiments suggest that hysteresis accounts for the outward force needed to support persistent holes.

Asymptotic Behavior of the Stock Price Distribution Density and Implied Volatility in Stochastic Volatility Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gulisashvili, Archil, E-mail: guli@math.ohiou.ed; Stein, Elias M., E-mail: stein@math.princeton.ed

2010-06-15

We study the asymptotic behavior of distribution densities arising in stock price models with stochastic volatility. The main objects of our interest in the present paper are the density of time averages of the squared volatility process and the density of the stock price process in the Stein-Stein and the Heston model. We find explicit formulas for leading terms in asymptotic expansions of these densities and give error estimates. As an application of our results, sharp asymptotic formulas for the implied volatility in the Stein-Stein and the Heston model are obtained.

Further We Travel the Faster We Go.

PubMed

Varga, Levente; Kovács, András; Tóth, Géza; Papp, István; Néda, Zoltán

2016-01-01

The average travelling speed increases in a nontrivial manner with the travel distance. This leads to scaling-like relations on quite extended spatial scales, for all mobility modes taken together and also for a given mobility mode in part. We offer a wide range of experimental results, investigating and quantifying this universal effect and its measurable causes. The increasing travelling speed with the travel distance arises from the combined effects of: choosing the most appropriate travelling mode; the structure of the travel networks; the travel times lost in the main hubs, starting or target cities; and the speed limit of roads and vehicles.

Efficiency Analysis of Integrated Public Hospital Networks in Outpatient Internal Medicine.

PubMed

Ortíz-Barrios, Miguel Angel; Escorcia-Caballero, Juan P; Sánchez-Sánchez, Fabián; De Felice, Fabio; Petrillo, Antonella

2017-09-07

Healthcare systems are evolving towards a complex network of interconnected services due to the increasing costs and the increasing expectations for high service levels. It is evidenced in the literature the importance of implementing management techniques and sophisticated methods to improve the efficiency of healthcare systems, especially in emerging economies. This paper proposes an integrated collaboration model between two public hospitals to reach the reduction of weighted average lead time in outpatient internal medicine department. A strategic framework based on value stream mapping and collaborative practices has been developed in real case study settled in Colombia.

SU-D-18C-05: Variable Bolus Arterial Spin Labeling MRI for Accurate Cerebral Blood Flow and Arterial Transit Time Mapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, M; Jung, Y

2014-06-01

Purpose: Arterial spin labeling (ASL) is an MRI perfusion imaging method from which quantitative cerebral blood flow (CBF) maps can be calculated. Acquisition with variable post-labeling delays (PLD) and variable TRs allows for arterial transit time (ATT) mapping and leads to more accurate CBF quantification with a scan time saving of 48%. In addition, T1 and M0 maps can be obtained without a separate scan. In order to accurately estimate ATT and T1 of brain tissue from the ASL data, variable labeling durations were invented, entitled variable-bolus ASL. Methods: All images were collected on a healthy subject with a 3Tmore » Siemens Skyra scanner. Variable-bolus Psuedo-continuous ASL (PCASL) images were collected with 7 TI times ranging 100-4300ms in increments of 700ms with TR ranging 1000-5200ms. All boluses were 1600ms when the TI allowed, otherwise the bolus duration was 100ms shorter than the TI. All TI times were interleaved to reduce sensitivity to motion. Voxel-wise T1 and M0 maps were estimated using a linear least squares fitting routine from the average singal from each TI time. Then pairwise subtraction of each label/control pair and averaging for each TI time was performed. CBF and ATT maps were created using the standard model by Buxton et al. with a nonlinear fitting routine using the T1 tissue map. Results: CBF maps insensitive to ATT were produced along with ATT maps. Both maps show patterns and averages consistent with literature. The T1 map also shows typical T1 contrast. Conclusion: It has been demonstrated that variablebolus ASL produces CBF maps free from the errors due to ATT and tissue T1 variations and provides M0, T1, and ATT maps which have potential utility. This is accomplished with a single scan in a feasible scan time (under 6 minutes) with low sensivity to motion.« less

Screening for childhood lead poisoning in the industrial region of Fez, Morocco.

PubMed

Bouftini, S; Bahhou, J; Lelievre, B; de la Barca, J M Chao; Turcant, A; Diquet, B; Abourazzak, S; Chaouki, S; Hida, M; Khattabi, A; Nejjari, C; Amarti, A; Achour, S

2015-04-01

The study objectives were to estimate lead poisoning prevalence among children living next to an industrial area, to compare it to that in a control population, and to establish clinical and biological follow-up of the poisoned children. This is a descriptive cross-sectional study including 150 children (exposed and unexposed) performed between January 2012 and April 2013. It was meant to determine blood lead levels (BLLs) in children considered to be an exposed population (EP N 90), living in the industrial area Ain Nokb Fez compared with BLLs of children of other areas belonging to the same city supposed to be unexposed [UP (N = 60)]. A sociodemographic questionnaire was obtained, and a blood lead analysis was performed. Clinical and biological follow-up has been performed of poisoned children. The sample consisted of 90 EP children with an average age of 6.82 ± 3.32 years and male-to-female sex ratio (SR) of 1.5 and 60 UP children with an average age of 6.45 ± 3.29 years and an SR of 1.2. Among the 150 children recruited, the average of BLLs was 58.21 ± 36 µg/L (18-202.3 μg/L). The average of BLLs in EP children (71 ± 40 µg/L) was statistically greater (p < 0.0001) than that registered in UP children (38 ± 13 µg/L). All poisoned children belonged to the EP group at a prevalence of 21.1 %. The clinical and biological examinations of poisoned children showed a few perturbations such as anemia, hypocalcaemia, and deficiencies in magnesium and iron. No renal disease or objective neurological disorders were observed. In the follow-up of the children with BLL ≥100 µg/L (19 cases). BLL monitoring showed a significant decrease in average of blood concentration ranging from 136.75 ± 32.59 to 104.58 ± 32.73 µg/L (p < 0.0001) and in lead poisoning prevalence (p < 0.001), which decreased to 7.8 % from 21.1. Our study showed a high prevalence of lead poisoning (21.1 %) in EP children. The relocation of the industrial site associated with corrective and preventive measures has contributed to a decrease of exposure and lead poisoning prevalence in the aforementioned population.

Assessing the Skill of Chlorophyll Forecasts: Latest Development and Challenges Ahead Using the Case of the Equatorial Pacific

NASA Technical Reports Server (NTRS)

Rousseaux, Cecile S.; Gregg, Watson W.

2018-01-01

Using a global ocean biogeochemical model combined with a forecast of physical oceanic and atmospheric variables from the NASA Global Modeling and Assimilation Office, we assess the skill of a chlorophyll concentrations forecast in the Equatorial Pacific for the period 2012-2015 with a focus on the forecast of the onset of the 2015 El Nino event. Using a series of retrospective 9-month hindcasts, we assess the uncertainties of the forecasted chlorophyll by comparing the monthly total chlorophyll concentration from the forecast with the corresponding monthly ocean chlorophyll data from the Suomi-National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (S-NPP VIIRS) satellite. The forecast was able to reproduce the phasing of the variability in chlorophyll concentration in the Equatorial Pacific, including the beginning of the 2015-2016 El Nino. The anomaly correlation coefficient (ACC) was significant (p less than 0.05) for forecast at 1-month (R=0.33), 8-month (R=0.42) and 9-month (R=0.41) lead times. The root mean square error (RMSE) increased from 0.0399 microgram chl L(exp -1) for the 1-month lead forecast to a maximum of 0.0472 microgram chl L(exp -1) for the 9-month lead forecast indicating that the forecast of the amplitude of chlorophyll concentration variability was getting worse. Forecasts with a 3-month lead time were on average the closest to the S-NPP VIIRS data (23% or 0.033 microgram chl L(exp -1)) while the forecast with a 9-month lead time were the furthest (31% or 0.042 microgram chl L(exp -1)). These results indicate the potential for forecasting chlorophyll concentration in this region but also highlights various deficiencies and suggestions for improvements to the current biogeochemical forecasting system. This system provides an initial basis for future applications including the effects of El Nino events on fisheries and other ocean resources given improvements identified in the analysis of these results.

Forecasting Ocean Chlorophyll in the Equatorial Pacific.

PubMed

Rousseaux, Cecile S; Gregg, Watson W

2017-01-01

Using a global ocean biogeochemical model combined with a forecast of physical oceanic and atmospheric variables from the NASA Global Modeling and Assimilation Office, we assess the skill of a chlorophyll concentrations forecast in the Equatorial Pacific for the period 2012-2015 with a focus on the forecast of the onset of the 2015 El Niño event. Using a series of retrospective 9-month hindcasts, we assess the uncertainties of the forecasted chlorophyll by comparing the monthly total chlorophyll concentration from the forecast with the corresponding monthly ocean chlorophyll data from the Suomi-National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (S-NPP VIIRS) satellite. The forecast was able to reproduce the phasing of the variability in chlorophyll concentration in the Equatorial Pacific, including the beginning of the 2015-2016 El Niño. The anomaly correlation coefficient (ACC) was significant ( p < 0.05) for forecast at 1-month ( R = 0.33), 8-month ( R = 0.42) and 9-month ( R = 0.41) lead times. The root mean square error (RMSE) increased from 0.0399 μg chl L -1 for the 1-month lead forecast to a maximum of 0.0472 μg chl L -1 for the 9-month lead forecast indicating that the forecast of the amplitude of chlorophyll concentration variability was getting worse. Forecasts with a 3-month lead time were on average the closest to the S-NPP VIIRS data (23% or 0.033 μg chl L -1 ) while the forecast with a 9-month lead time were the furthest (31% or 0.042 μg chl L -1 ). These results indicate the potential for forecasting chlorophyll concentration in this region but also highlights various deficiencies and suggestions for improvements to the current biogeochemical forecasting system. This system provides an initial basis for future applications including the effects of El Niño events on fisheries and other ocean resources given improvements identified in the analysis of these results.

Real-time volumetric image reconstruction and 3D tumor localization based on a single x-ray projection image for lung cancer radiotherapy.

PubMed

Li, Ruijiang; Jia, Xun; Lewis, John H; Gu, Xuejun; Folkerts, Michael; Men, Chunhua; Jiang, Steve B

2010-06-01

To develop an algorithm for real-time volumetric image reconstruction and 3D tumor localization based on a single x-ray projection image for lung cancer radiotherapy. Given a set of volumetric images of a patient at N breathing phases as the training data, deformable image registration was performed between a reference phase and the other N-1 phases, resulting in N-1 deformation vector fields (DVFs). These DVFs can be represented efficiently by a few eigenvectors and coefficients obtained from principal component analysis (PCA). By varying the PCA coefficients, new DVFs can be generated, which, when applied on the reference image, lead to new volumetric images. A volumetric image can then be reconstructed from a single projection image by optimizing the PCA coefficients such that its computed projection matches the measured one. The 3D location of the tumor can be derived by applying the inverted DVF on its position in the reference image. The algorithm was implemented on graphics processing units (GPUs) to achieve real-time efficiency. The training data were generated using a realistic and dynamic mathematical phantom with ten breathing phases. The testing data were 360 cone beam projections corresponding to one gantry rotation, simulated using the same phantom with a 50% increase in breathing amplitude. The average relative image intensity error of the reconstructed volumetric images is 6.9% +/- 2.4%. The average 3D tumor localization error is 0.8 +/- 0.5 mm. On an NVIDIA Tesla C1060 GPU card, the average computation time for reconstructing a volumetric image from each projection is 0.24 s (range: 0.17 and 0.35 s). The authors have shown the feasibility of reconstructing volumetric images and localizing tumor positions in 3D in near real-time from a single x-ray image.

Autofusion in the immature spine treated with growing rods.

PubMed

Cahill, Patrick J; Marvil, Sean; Cuddihy, Laury; Schutt, Corey; Idema, Jocelyn; Clements, David H; Antonacci, M Darryl; Asghar, Jahangir; Samdani, Amer F; Betz, Randal R

2010-10-15

Retrospective case review of skeletally immature patients treated with growing rods. Patients received an average of 9.6 years follow-up care. (1) to identify the rate of autofusion in the growing spine with the use of growing rods; (2) to quantify how much correction can be attained with definitive instrumented fusion after long-term treatment with growing rods; and (3) to describe the extent of Smith-Petersen osteotomies required to gain correction of an autofused spine following growing rod treatment. The safety and use of growing rods for curve correction and maintenance in the growing spine population has been established in published reports. While autofusion has been reported, the prevalence and sequelae are not known. Nine skeletally immature children with scoliosis were identified who had been treated using growing rods. A retrospective review of the medical records and radiographs was conducted and the following data collected: complications, pre- and postoperative Cobb angles at time of initial surgery (growing rod placement), pre- and postoperative Cobb angles at time of final surgery (growing rod removal and definitive fusion), total spine length as measured from T1-S1, % correction since initiation of treatment and at definitive fusion, total number of surgeries, and number of patients found to have autofusion at the time of device removal. The rate of autofusion in children treated with growing rods was 89%. The average percent of the Cobb angle correction obtained at definitive fusion was 44%. On average, 7 osteotomies per patient were required at the time of definitive fusion due to autofusion. Although growing rods have efficacy in the control of deformity within the growing spine, they also have adverse effects on the spine. Immature spines treated with a growing rod have high rates of unintended autofusion which can possibly lead to difficult and only moderate correction at the time of definitive fusion.

Use of lean sigma principles in a tertiary care otolaryngology clinic to improve efficiency.

PubMed

Lin, Sandra Y; Gavney, Dean; Ishman, Stacey L; Cady-Reh, Julie

2013-11-01

To apply Lean Sigma, a quality-improvement strategy supported by tactical tools to eliminate waste and reduce variation, to improve efficiency of patient flow in a large tertiary otolaryngology clinic. The project goals were to decrease overall lead time from patient arrival to start of interaction with care provider, improve on-time starts of patient visits, and decrease excess staff/patient motion. Prospective observational study. Patient flow was mapped through the clinic, including preregistration processes. A time-stamp observation study was performed on 188 patient visits over 5 days. Using Lean Sigma principles, time stamps were analyzed to identify patient flow constraints and areas for potential interventions. Interventions were evaluated and adjusted based on feedback from shareholders: removal of bottlenecks in clinic flow, elimination of non-value added registration staff tasks, and alignment of staff hours to accommodate times of high patient census. A postintervention time observation study of 141 patients was performed 5 months later. Patient lead time from clinic arrival to exam start time decreased by 12.2% on average (P = .042). On-time starts for patient exams improved by 34% (χ(2) = 16.091, P < .001). Excess patient motion was reduced by 74 feet per patient, which represents a 34% reduction in motion per visit. Use of Lean Sigma principles in a large tertiary otolaryngology clinic led to decreased patient wait time and significant improvements in on-time patient exam start time. Process mapping, engagement of leadership and staff, and elimination of non-value added steps or processes were key to improvement. Copyright © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Cascading impacts of anthropogenically driven habitat loss: deforestation, flooding, and possible lead poisoning in howler monkeys (Alouatta pigra).

PubMed

Serio-Silva, Juan Carlos; Olguín, Eugenia J; Garcia-Feria, Luis; Tapia-Fierro, Karla; Chapman, Colin A

2015-01-01

To construct informed conservation plans, researchers must go beyond understanding readily apparent threats such as habitat loss and bush-meat hunting. They must predict subtle and cascading effects of anthropogenic environmental modifications. This study considered a potential cascading effect of deforestation on the howler monkeys (Alouatta pigra) of Balancán, Mexico. Deforestation intensifies flooding. Thus, we predicted that increased flooding of the Usumacinta River, which creates large bodies of water that slowly evaporate, would produce increased lead content in the soils and plants, resulting in lead exposure in the howler monkeys. The average lead levels were 18.18 ± 6.76 ppm in the soils and 5.85 ± 4.37 ppm in the plants. However, the average lead content of the hair of 13 captured howler monkeys was 24.12 ± 5.84 ppm. The lead levels in the animals were correlated with 2 of 15 blood traits (lactate dehydrogenase and total bilirubin) previously documented to be associated with exposure to lead. Our research illustrates the urgent need to set reference values indicating when adverse impacts of high environmental lead levels occur, whether anthropogenic or natural, and the need to evaluate possible cascading effects of deforestation on primates.

Behind the Match Process: Is There Any Financial Difference Lurking Below the Specialty of Choice?

PubMed

Oladeji, Lasun O; Raley, James A; Smith, Stephen; Perez, Jorge L; McGwin, Gerald; Ponce, Brent A

2016-12-01

The Match was developed in response to a chaotic residency selection process. While the match has remained relatively unchanged since it was introduced, the number of medical school graduates has increased at a rate outpacing the number of residency positions leading to a more competitive process for applicants. In May 2014, an 18-question mixed-response questionnaire was distributed to fourth year allopathic medical students via an E-mail distribution list for student affairs representatives. The individual surveys were accessible via SurveyMonkey and available for completion over the course of a 4-week period. Approximately 65.1 per cent of students performed at least one audition rotation and documented average expenditures of $2494 on housing, food, and transportation. The average applicant applied to 32 programs and attended 12 interviews while spending $4420 on the interview trail. Applicants for surgical programs applied to approximately 42 programs and attended 13 interviews compared with primary care applicants who averaged 23 programs (P < 0.001) and attended 12 interviews (P = 0.002). Surgical applicants averaged 20 days on the interview trail while spending $5500 ($423/interview) on housing, food, and transportation compared with primary care applicants averaged 19 days away from home (P < 0.05) and spending $3400 ($283/interview) on these same items (P < 0.001). The findings in our study indicate that the "Match process" contributes to the financial burden of graduating medical students and it is more expensive and time consuming for the candidates interested in surgical specialties.

Incremental Value of Repeated Risk Factor Measurements for Cardiovascular Disease Prediction in Middle-Aged Korean Adults: Results From the NHIS-HEALS (National Health Insurance System-National Health Screening Cohort).

PubMed

Cho, In-Jeong; Sung, Ji Min; Chang, Hyuk-Jae; Chung, Namsik; Kim, Hyeon Chang

2017-11-01

Increasing evidence suggests that repeatedly measured cardiovascular disease (CVD) risk factors may have an additive predictive value compared with single measured levels. Thus, we evaluated the incremental predictive value of incorporating periodic health screening data for CVD prediction in a large nationwide cohort with periodic health screening tests. A total of 467 708 persons aged 40 to 79 years and free from CVD were randomly divided into development (70%) and validation subcohorts (30%). We developed 3 different CVD prediction models: a single measure model using single time point screening data; a longitudinal average model using average risk factor values from periodic screening data; and a longitudinal summary model using average values and the variability of risk factors. The development subcohort included 327 396 persons who had 3.2 health screenings on average and 25 765 cases of CVD over 12 years. The C statistics (95% confidence interval [CI]) for the single measure, longitudinal average, and longitudinal summary models were 0.690 (95% CI, 0.682-0.698), 0.695 (95% CI, 0.687-0.703), and 0.752 (95% CI, 0.744-0.760) in men and 0.732 (95% CI, 0.722-0.742), 0.735 (95% CI, 0.725-0.745), and 0.790 (95% CI, 0.780-0.800) in women, respectively. The net reclassification index from the single measure model to the longitudinal average model was 1.78% in men and 1.33% in women, and the index from the longitudinal average model to the longitudinal summary model was 32.71% in men and 34.98% in women. Using averages of repeatedly measured risk factor values modestly improves CVD predictability compared with single measurement values. Incorporating the average and variability information of repeated measurements can lead to great improvements in disease prediction. URL: https://www.clinicaltrials.gov. Unique identifier: NCT02931500. © 2017 American Heart Association, Inc.

Fast and accurate fitting and filtering of noisy exponentials in Legendre space.

PubMed

Bao, Guobin; Schild, Detlev

2014-01-01

The parameters of experimentally obtained exponentials are usually found by least-squares fitting methods. Essentially, this is done by minimizing the mean squares sum of the differences between the data, most often a function of time, and a parameter-defined model function. Here we delineate a novel method where the noisy data are represented and analyzed in the space of Legendre polynomials. This is advantageous in several respects. First, parameter retrieval in the Legendre domain is typically two orders of magnitude faster than direct fitting in the time domain. Second, data fitting in a low-dimensional Legendre space yields estimates for amplitudes and time constants which are, on the average, more precise compared to least-squares-fitting with equal weights in the time domain. Third, the Legendre analysis of two exponentials gives satisfactory estimates in parameter ranges where least-squares-fitting in the time domain typically fails. Finally, filtering exponentials in the domain of Legendre polynomials leads to marked noise removal without the phase shift characteristic for conventional lowpass filters.

Using self-organizing maps to infill missing data in hydro-meteorological time series from the Logone catchment, Lake Chad basin.

PubMed

Nkiaka, E; Nawaz, N R; Lovett, J C

2016-07-01

Hydro-meteorological data is an important asset that can enhance management of water resources. But existing data often contains gaps, leading to uncertainties and so compromising their use. Although many methods exist for infilling data gaps in hydro-meteorological time series, many of these methods require inputs from neighbouring stations, which are often not available, while other methods are computationally demanding. Computing techniques such as artificial intelligence can be used to address this challenge. Self-organizing maps (SOMs), which are a type of artificial neural network, were used for infilling gaps in a hydro-meteorological time series in a Sudano-Sahel catchment. The coefficients of determination obtained were all above 0.75 and 0.65 while the average topographic error was 0.008 and 0.02 for rainfall and river discharge time series, respectively. These results further indicate that SOMs are a robust and efficient method for infilling missing gaps in hydro-meteorological time series.

[Lead intakes by different age-sex population groups from Chinese total diet study in 2000].

PubMed

Zhang, Lei; Gao, Junquan; Li, Xiaowei

2007-07-01

To estimate the dietary lead intakes by different age-sex population groups in China. The lead concentrations of food sample from 3rd Chinese total diet study were determined, and then were combined with the food consumption by population of ten age-sex groups, The lead intakes, and its distribution and dietary sources were obtained. It was found that the mean and median concentrations of lead in all food samples were 0.118 and 0.052mg/kg, respectively. The highest concentration of individual sample and mean concentrations of lead in preserved egg were 8.964mg/kg and 2.577mg/kg, respectively. The vegetable samples in Hubei Province were heavily contaminated. The lead intakes by different age-sex groups were estimated to be 54.9-112.7microg/day. The average dietary lead intakes by 2-7 years old group could reach 86.1% of PTWI, and individual lead intakes by about 30% children in this group exceed PTWI. But the average dietary lead intakes of other age-sex population groups ranged from 42.8% to 86.1% of PTWI. The main sources of dietary lead were cereals and vegetables in ten age-sex population groups, and could reach 72%-80% of total lead intakes. Although the dietary lead intakes by different age-sex population groups are all lower than PTWI, it should be decreased to a lower level. Moreover, the dietary exposures to lead are higher enough for 2-7 years old children and population in some provinces to be considered seriously.

Current Readings: Single Versus Bilateral Internal Mammary Artery in Coronary Artery Bypass Grafting.

PubMed

Ejiofor, Julius I; Kaneko, Tsuyoshi; Aranki, Sary F

2018-06-24

There is strong retrospective data demonstrating that BIMA grafting leads to better long-term survival as compared to LIMA grafting. However, this survival advantage was not corroborated by the interim results of the Arterial Revascularization Trial(ART). Today, there are barriers to widespread adoption of BIMA grafting. One of the main disadvantages of the use of BIMA grafts is the higher risk of DSWI. Deep sternal wound infections can be minimized by skeletonized harvesting of the IMA grafts, which preserves blood flow to the sternum. Also, utilizing the BIMA graft as a "Y" graft may lead to more complete revascularization compared to its in-situ use. BIMA grafting on average takes 25 minutes longer operating time with a higher in-hospital costs. We eagerly await the 10-year results of the ART trial to determine the truly unbiased randomized long-term effectiveness of BIMA grafting. Copyright © 2018 Elsevier Ltd. All rights reserved.

Colorectal cancer development and advances in screening.

PubMed

Simon, Karen

2016-01-01

Most colon tumors develop via a multistep process involving a series of histological, morphological, and genetic changes that accumulate over time. This has allowed for screening and detection of early-stage precancerous polyps before they become cancerous in individuals at average risk for colorectal cancer (CRC), which may lead to substantial decreases in the incidence of CRC. Despite the known benefits of early screening, CRC remains the second leading cause of cancer-related deaths in the United States. Hence, it is important for health care providers to have an understanding of the risk factors for CRC and various stages of disease development in order to recommend appropriate screening strategies. This article provides an overview of the histological/molecular changes that characterize the development of CRC. It describes the available CRC screening methods and their advantages and limitations and highlights the stages of CRC development in which each screening method is most effective.

Hospital doctors' career structure and misuse of medical womanpower.

PubMed

Bewley, B R; Bewley, T H

1975-08-09

Biological and culturel differences between men and women lead to severe discrimination against women doctors who bear the burdens of pregnancy, child-rearing, and housework. These lead, from equality within medical school and at qualification, to increasing failure to obtain posts commensurate with their innate abilities. Women doctors who temporarily and partially drop out of full-time practice have been studied frequently, but men (who are equally expensive to train) have not, despite their disappearing from National Health Service practice through emigration, death, alcoholism, suicide, or removal from the Medical Register. In a working lifetime of forty years, a woman doctor with an average family is likely to do seven-eighths of the work of a doctor who has not had to carry the primary responsibility of bearing and rearing children. Doctors with dependants are handicapped, and a separate career structure might be set up for them. Supernumerary consultant posts are proposed.

Attrition and carbon formation on iron catalysts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kohler, S.D.; Harrington, M.S.; Jackson, N.B.

1994-08-01

A serious engineering problem that needs to be addressed in the scale-up of slurry-phase, Fischer-Tropsch reactors is attrition of the precipitated iron catalyst. Attrition, which can break down the catalyst into particles too small to filter, results from both mechanical and chemical forces. This study examines the chemical causes of attrition in iron catalysts. A bench-scale, slurry-phase CSTR is used to simulate operating conditions that lead to attrition of the catalyst. The average particle size and size distribution of the catalyst samples are used to determine the effect of slurry temperature, reducing gas, gas flow rate and time upon attritionmore » of the catalyst. Carbon deposition, a possible contributing factor to attrition, has been examined using gravimetric analysis and TEM. Conditions affecting the rate of carbon deposition have been compared to those leading to attrition of the precipitated iron catalyst.« less

Lift enhancement by bats' dynamically changing wingspan

PubMed Central

Wang, Shizhao; Zhang, Xing; He, Guowei; Liu, Tianshu

2015-01-01

This paper elucidates the aerodynamic role of the dynamically changing wingspan in bat flight. Based on direct numerical simulations of the flow over a slow-flying bat, it is found that the dynamically changing wingspan can significantly enhance the lift. Further, an analysis of flow structures and lift decomposition reveal that the elevated vortex lift associated with the leading-edge vortices intensified by the dynamically changing wingspan considerably contributed to enhancement of the time-averaged lift. The nonlinear interaction between the dynamically changing wing and the vortical structures plays an important role in the lift enhancement of a flying bat in addition to the geometrical effect of changing the lifting-surface area in a flapping cycle. In addition, the dynamically changing wingspan leads to the higher efficiency in terms of generating lift for a given amount of the mechanical energy consumed in flight. PMID:26701882

Colorectal cancer development and advances in screening

PubMed Central

Simon, Karen

2016-01-01

Most colon tumors develop via a multistep process involving a series of histological, morphological, and genetic changes that accumulate over time. This has allowed for screening and detection of early-stage precancerous polyps before they become cancerous in individuals at average risk for colorectal cancer (CRC), which may lead to substantial decreases in the incidence of CRC. Despite the known benefits of early screening, CRC remains the second leading cause of cancer-related deaths in the United States. Hence, it is important for health care providers to have an understanding of the risk factors for CRC and various stages of disease development in order to recommend appropriate screening strategies. This article provides an overview of the histological/molecular changes that characterize the development of CRC. It describes the available CRC screening methods and their advantages and limitations and highlights the stages of CRC development in which each screening method is most effective. PMID:27486317

Hidden discriminative features extraction for supervised high-order time series modeling.

PubMed

Nguyen, Ngoc Anh Thi; Yang, Hyung-Jeong; Kim, Sunhee

2016-11-01

In this paper, an orthogonal Tucker-decomposition-based extraction of high-order discriminative subspaces from a tensor-based time series data structure is presented, named as Tensor Discriminative Feature Extraction (TDFE). TDFE relies on the employment of category information for the maximization of the between-class scatter and the minimization of the within-class scatter to extract optimal hidden discriminative feature subspaces that are simultaneously spanned by every modality for supervised tensor modeling. In this context, the proposed tensor-decomposition method provides the following benefits: i) reduces dimensionality while robustly mining the underlying discriminative features, ii) results in effective interpretable features that lead to an improved classification and visualization, and iii) reduces the processing time during the training stage and the filtering of the projection by solving the generalized eigenvalue issue at each alternation step. Two real third-order tensor-structures of time series datasets (an epilepsy electroencephalogram (EEG) that is modeled as channel×frequency bin×time frame and a microarray data that is modeled as gene×sample×time) were used for the evaluation of the TDFE. The experiment results corroborate the advantages of the proposed method with averages of 98.26% and 89.63% for the classification accuracies of the epilepsy dataset and the microarray dataset, respectively. These performance averages represent an improvement on those of the matrix-based algorithms and recent tensor-based, discriminant-decomposition approaches; this is especially the case considering the small number of samples that are used in practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

An automated system for performing continuous viscosity versus temperature measurements of fluids using an Ostwald viscometer

NASA Astrophysics Data System (ADS)

Beaulieu, L. Y.; Logan, E. R.; Gering, K. L.; Dahn, J. R.

2017-09-01

An automated system was developed to measure the viscosity of fluids as a function of temperature using image analysis tracking software. An Ostwald viscometer was placed in a three-wall dewar in which ethylene glycol was circulated using a thermal bath. The system collected continuous measurements during both heating and cooling cycles exhibiting no hysteresis. The use of video tracking analysis software greatly reduced the measurement errors associated with measuring the time required for the meniscus to pass through the markings on the viscometer. The stability of the system was assessed by performing 38 consecutive measurements of water at 42.50 ± 0.05 °C giving an average flow time of 87.7 ± 0.3 s. A device was also implemented to repeatedly deliver a constant volume of liquid of 11.00 ± 0.03 ml leading to an average error in the viscosity of 0.04%. As an application, the system was used to measure the viscosity of two Li-ion battery electrolyte solvents from approximately 10 to 40 °C with results showing excellent agreement with viscosity values calculated using Gering's Advanced Electrolyte Model (AEM).

Estimating lift from unsteady wakes by using the Kutta-Joukowski theorem with vorticity-weighted wake width

NASA Astrophysics Data System (ADS)

Wang, Shizhao; He, Guowei; Liu, Tianshu

2017-11-01

The Kutta-Joukowski (KJ) theorem usually leads to puzzling results when it is applied to estimating the lift from the unsteady wakes generated by flapping wings. We investigate this problem by using a prevalent flapping rectangular wing model, where the unsteady wakes are obtained by numerically solving the Navier-Stokes equations at a low Reynolds number. It is found that neither the unsteady nor the time-averaged lift coefficient is correctly predicted when the parameters for the KJ theorem are selected according to the widely accepted ways in the literature. We propose a vorticity-weighted wake width model based on the vortex impulse theory to improve the prediction of the time-averaged lift. Furthermore, we investigate the phase difference of unsteady lift caused by the quasi-steady assumption of the application of the KJ theorem to the flapping flight and quantitatively link the phase difference to the local fluid acceleration. We show the phase difference can be corrected by using an added mass lift model. This work is helpful to clarify the error in estimating the lift of animal flight. Supported by the National Natural Science Foundation of China (No. 11672305).

Evaluating #VetFinals: Can Twitter help students prepare for final examinations?

PubMed

Kinnison, Tierney; Whiting, Martin; Magnier, Kirsty; Mossop, Liz

2017-04-01

Twitter is increasingly used in education. In this article, Twitter was evaluated for its potential to aid veterinary students in their preparation for final examinations. "#VetFinals" revision sessions were facilitated by experts on a variety of topics. The initiative was evaluated through consideration of potential participants, session content and student experiences. In analysis of nine sessions, 52 students participated from eight veterinary schools. During a session, the facilitator tweeted 66 times on average, primarily asking a general question. Students on average tweeted 84 times, mostly in response to facilitators. They also asked novel questions and responded to fellow students. Focus groups and interviews with 11 students suggested that: sessions are useful for preparation/self-testing to succeed in exams; the facilitator and session style impact on learning; the sessions feel like personalized learning; there are elements of safety and exposure leading to some fear of tweeting; peer-learning promotes competition; a community of learners was formed; Twitter has become a part of normal professional life. Whilst not all students will take part in this type of social media use, many found it beneficial. The importance of the facilitator suggests the need for faculty development.

Objective assessment of the effects of texting while driving: a simulator study.

PubMed

Bendak, Salaheddine

2015-01-01

Recent advances in electronic communication technology led to many drivers opting to send and receive text messages while driving. This, inevitably, has a potential to distract drivers, impair driving performance and lead to crashes. This study aims to assess the risk involved in texting while driving through assessing the distraction caused and determining the change in key driving performance indicators. Twenty-one paid young male volunteers were recruited to participate in this study. Each participant drove a driving simulator on four different scenarios involving driving while texting and without texting on highways and town roads. Results showed that texting while driving led, on average, to five times more crashes than driving without texting. Due to distraction also, participants unnecessarily crossed lane boundaries and road boundaries more often while texting as compared to driving without texting. Moreover, distraction due to texting led to participants deviating their eyes off the road while texting 15 times per session, on average, more than without texting. Results demonstrated a high-risk level of distraction and clear impairment in drivers' ability to drive safely due to texting. Based on the results, practical recommendations to combat this phenomenon are given.

Stochastic processes on multiple scales: averaging, decimation and beyond

NASA Astrophysics Data System (ADS)

Bo, Stefano; Celani, Antonio

The recent advances in handling microscopic systems are increasingly motivating stochastic modeling in a large number of physical, chemical and biological phenomena. Relevant processes often take place on widely separated time scales. In order to simplify the description, one usually focuses on the slower degrees of freedom and only the average effect of the fast ones is retained. It is then fundamental to eliminate such fast variables in a controlled fashion, carefully accounting for their net effect on the slower dynamics. We shall present how this can be done by either decimating or coarse-graining the fast processes and discuss applications to physical, biological and chemical examples. With the same tools we will address the fate of functionals of the stochastic trajectories (such as residence times, counting statistics, fluxes, entropy production, etc.) upon elimination of the fast variables. In general, for functionals, such elimination can present additional difficulties. In some cases, it is not possible to express them in terms of the effective trajectories on the slow degrees of freedom but additional details of the fast processes must be retained. We will focus on such cases and show how naive procedures can lead to inconsistent results.

Driven assembly with multiaxial fields: Creating a soft mode in assemblies of anisometric induced dipoles

DOE PAGES

Martin, James E.; Swol, Frank Van

2015-07-10

We show that multiaxial fields can induce time-averaged, noncentrosymmetric interactions between particles having polarization anisotropy, yet the multiaxial field itself does not exert either a force or a torque on an isolated particle. These induced interactions lead to particle assemblies whose energy is strongly dependent on both the translational and orientational degrees of freedom of the system. The situation is similar to a collection of permanent dipoles, but the symmetry of the time-averaged interaction is quite distinct, and the scale of the system energy can be dynamically controlled by the magnitude of the applied multiaxial field. In our paper, themore » case of polarizable rods is considered in detail, and it is suggested that collections of rods embedded in spheres can be used to create a material with a dynamically tunable magnetic permeability or dielectric permittivity. We report on Monte Carlo simulations performed to investigate the behavior of assemblies of both multiaxial-field induced dipoles and permanent dipoles arranged onto two-dimensional lattices. Lastly, the ground state of the induced dipoles is an orientational soft mode of aligned dipoles, whereas that of the permanent dipoles is a vortex state.« less

A global quantification of "normal" sleep schedules using smartphone data.

PubMed

Walch, Olivia J; Cochran, Amy; Forger, Daniel B

2016-05-01

The influence of the circadian clock on sleep scheduling has been studied extensively in the laboratory; however, the effects of society on sleep remain largely unquantified. We show how a smartphone app that we have developed, ENTRAIN, accurately collects data on sleep habits around the world. Through mathematical modeling and statistics, we find that social pressures weaken and/or conceal biological drives in the evening, leading individuals to delay their bedtime and shorten their sleep. A country's average bedtime, but not average wake time, predicts sleep duration. We further show that mathematical models based on controlled laboratory experiments predict qualitative trends in sunrise, sunset, and light level; however, these effects are attenuated in the real world around bedtime. Additionally, we find that women schedule more sleep than men and that users reporting that they are typically exposed to outdoor light go to sleep earlier and sleep more than those reporting indoor light. Finally, we find that age is the primary determinant of sleep timing, and that age plays an important role in the variability of population-level sleep habits. This work better defines and personalizes "normal" sleep, produces hypotheses for future testing in the laboratory, and suggests important ways to counteract the global sleep crisis.

Reductive spectrophotometry of divalent tin sensitization on soda lime glass

NASA Astrophysics Data System (ADS)

Bejugam, Vinith; Wei, Xingfei; Roper, D. Keith

2016-07-01

Rapid and facile evaluation of tin (II) sensitization could lead to improved understanding of metal deposition in electroless (EL) plating. This report used a balanced redox reaction between 3,3‧,5,5‧-tetramethylbenzidine dihydrochloride (TMB-HCL) and N-bromosuccinimide (NBS) to evaluate effects of sensitization conditions (i.e., sensitization time, analyte concentration, aqueous immersion, and acid content) on the accumulated mass of surface-associated divalent tin ion. The accumulated mass of tin (II) increased as the sensitization time increased up to 30 s in proportion to aqueous tin (II) chloride concentrations between 2.6 and 26 mM at a trifluoroacetic acid (TFA) content of 68 mM. The average mass peaked at 7.3 nanomoles (nmol) per cm2 after a 5 s aqueous immersion post-sensitization, and then decreased with increasing aqueous immersion post-sensitization. The total average tin (II) + tin (IV) accumulated on soda lime glass measured by inductively coupled plasma optical emission spectrometry (ICP-OES) was 17% higher at 30 s sensitization, suggesting a fraction of the tin (II) present may have oxidized to tin (IV). These results indicated that in situ spectrophotometric evaluation of tin (II) could support development of EL plating for electronics, catalysis, and solar cells.

Increased shell entropy as an explanation for observed decreased shell areal densities in OMEGA implosions

NASA Astrophysics Data System (ADS)

Hoffman, Nelson; Herrmann, Hans; Kim, Yongho

2014-10-01

A reduced ion-kinetic (RIK) model used in hydrodynamic simulations has had some success in explaining time- and space-averaged observables characterizing the fusion fuel in hot low-density ICF capsule implosions driven by 1-ns 60-beam laser pulses at OMEGA. But observables characterizing the capsule shell, e.g., the areal density of 12C in a plastic shell, have proved harder to explain. Recently we have found that assuming the shell has higher entropy than expected in a 1D laser-driven RIK simulation allows an explanation of the observed values of 12C areal density, and its dependence on initial shell thickness in a set of DT-filled plastic capsules. If, for example, a 15- μm CH shell implodes on an adiabat two to three times higher than predicted in a typical unmodified RIK simulation, the calculated burn-averaged shell areal density decreases from ~80 mg/cm2 in the unmodified simulation to the observed value of ~25 mg/cm2. We discuss possible mechanisms that could lead to increased entropy in such implosions. Research supported by U.S. Department of Energy under Contract DE-AC52-06NA25396.

Electrical fatalities among U.S. construction workers.

PubMed

Ore, T; Casini, V

1996-06-01

Over 2000 electrocution deaths were identified among U.S. construction workers from 1980 to 1991, with the highest mean annual crude mortality rate (2.5 per 100,000 people), and second highest mean age-adjusted rate (2.7 per 100,000 people) of all industries. Although the crude fatality rates showed a downward trend, construction workers are still about four times more likely to be electrocuted at work than are workers in all industries combined. Nearly 40% of the 5083 fatal electrocutions in all industries combined occurred in construction, and 80% were associated with industrial wiring, appliances, and transmission lines. Electrocutions ranked as the second leading cause of death among construction workers, accounting for an average of 15% of traumatic deaths in the industry from 1980 to 1991. The study indicates that the workers most at risk of electrical injury are male, young, nonwhite, and electricians, structural metal workers, and laborers. The most likely time of injury is 11 a.m. to 3 p.m. from June to August. Focusing prevention on these populations and characteristics through better methods of worker and supervisor electrical safety training, use of adequate protective clothing, and compliance with established procedures could minimize the average annual loss of 168 U.S. construction workers.

Using rainfall radar data to improve interpolated maps of dose rate in the Netherlands.

PubMed

Hiemstra, Paul H; Pebesma, Edzer J; Heuvelink, Gerard B M; Twenhöfel, Chris J W

2010-12-01

The radiation monitoring network in the Netherlands is designed to detect and track increased radiation levels, dose rate more specifically, in 10-minute intervals. The network consists of 153 monitoring stations. Washout of radon progeny by rainfall is the most important cause of natural variations in dose rate. The increase in dose rate at a given time is a function of the amount of progeny decaying, which in turn is a balance between deposition of progeny by rainfall and radioactive decay. The increase in progeny is closely related to average rainfall intensity over the last 2.5h. We included decay of progeny by using weighted averaged rainfall intensity, where the weight decreases back in time. The decrease in weight is related to the half-life of radon progeny. In this paper we show for a rainstorm on the 20th of July 2007 that weighted averaged rainfall intensity estimated from rainfall radar images, collected every 5min, performs much better as a predictor of increases in dose rate than using the non-averaged rainfall intensity. In addition, we show through cross-validation that including weighted averaged rainfall intensity in an interpolated map using universal kriging (UK) does not necessarily lead to a more accurate map. This might be attributed to the high density of monitoring stations in comparison to the spatial extent of a typical rain event. Reducing the network density improved the accuracy of the map when universal kriging was used instead of ordinary kriging (no trend). Consequently, in a less dense network the positive influence of including a trend is likely to increase. Furthermore, we suspect that UK better reproduces the sharp boundaries present in rainfall maps, but that the lack of short-distance monitoring station pairs prevents cross-validation from revealing this effect. Copyright © 2010 Elsevier B.V. All rights reserved.

Examination of lead concentrations in new decorative enamel paints in four countries with different histories of activity in lead paint regulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, C. Scott, E-mail: clarkcs@ucmail.uc.edu; International POPS Elimination Network; Kumar, Abhay

Paints with high lead concentrations (ppm) continue to be sold around the world in many developing countries and those with economies in transition representing a major preventable environmental health hazard that is being increased as the economies expand and paint consumption is increasing. Prior lead paint testing had been performed in Brazil and India and these countries were selected to examine the impact of a new regulatory limit in Brazil and the impact of efforts of non-governmental organizations and others to stop the use of lead compounds in manufacturing paints. Armenia and Kazakhstan, in Central Asia, were selected because nomore » information on lead concentration in those regions was available, no regulatory activities were evident and non-governmental organizations in the IPEN network were available to participate. Another objective of this research was to evaluate the lead loading (µg/cm{sup 2}) limit determined by X-Ray Fluorescence (XRF) for areas on toys that are too small to obtain a sample of sufficient size for laboratory analysis. The lead concentrations in more than three-fourths of the paints from Armenia and Kazakhstan exceeded 90 ppm, the limit in the United States, and 600 ppm, the limit in Brazil. The percentages were about one-half as high in Brazil and India. The average concentration in paints purchased in Armenia, 25,000 ppm, is among the highest that has been previously reported, that in Kazakhstan, 15,700 ppm, and India, 16,600, about median. The average concentration in Brazil, 5600 ppm, is among the lowest observed. Paints in Brazil that contained an average of 36,000 ppm before the regulatory limit became effective were below detection (<9 ppm) in samples collected in the current study. The lack of any apparent public monitoring of paint lead content as part of regulatory enforcement makes it difficult to determine whether the regulation was a major factor contributing to the decline in lead use in these paints. Using data from the current study and those available from other studies 24 of 28 paints from major brands in India decreased from high concentrations to 90 ppm or lower. Since lead concentrations in golden yellow paints from these brands were found to decrease to ≤90 ppm, it is possible that all 28 of these paints now contain ≤90 ppm since yellow paints usually have the highest lead concentrations. Other brands in Brazil and India that have been analyzed only one time had lead concentrations up to 59,000 ppm and 134,000 ppm, respectively. Less than one-third of the paints had notations on their labels with information about lead content and these were sometimes inaccurate. The label from one brand indicating “no added lead” contained paint with 134,000 ppm lead, the highest found in this study. Three percent (3 of 98) of the paints with surface lead loading that did not exceed 2 µg/cm{sup 2}, the limit established by the Consumer Product Safety Improvement Act for small areas on toys, contained greater than 90 ppm lead and thus were false negatives. Of the new paint samples that contained ≤600 ppm, 88% contained ≤90 ppm. Of the samples that contained ≤90 ppm, 97% contained ≤45 ppm and 92% contained ≤15 ppm. Based on these data it appears to be technically feasible to manufacture paints containing ≤90 ppm and in many cases to produce paints that have lead concentrations that do not exceed 15 ppm. - Highlights: • Brazilian paints with high lead (avg. 36,000 ppm) contained <9 ppm after regulation. • Lead in major Indian paint brands decreased to low levels by efforts of NGOs/others. • Most paints with lead ≤600 ppm also are ≤90 ppm and many also ≤15 ppm. • At the CPSIA limit of 2 µg Pb/cm{sup 2} for small areas on toys, 3% exceeded 90 ppm lead. • Most paint brands in Armenia and Kazakhstan based/manufactured outside the country.« less

Cross-sectional analysis of the possible relationship between lead exposure in the storage-battery industry and changes in biochemical markers of renal, hematopoietic, and hepatic functioning and the reporting of recent abdominal pain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zelenak, J.P.

There is extensive literature documenting the physical effects, such as renal impairment and disruption of hematopoiesis, of lead exposure in occupational cohorts. In addition, a small number of case studies have suggested that lead exposure might result in hepatocellular effects. This study was undertaken to determine if these effects still existed for a population of lead storage battery workers exposed to occupational lead exposures which were lower than those experienced by most lead workers prior to 1978. The relationship between the lead exposure indices,zinc protoporphyrin (ZPP) and a time weighted average blood lead measure (TWA), with twelve biochemical parameters indicativemore » of renal, hematopoietic and hepatic functioning and the reporting of recent abdominal pain was investigated. In addition, the possible modifying effects of alcohol consumption and duration of exposure on the relationship between lead exposure and the biochemical parameters were examined. The subjects for this analysis consisted of 288 lead workers form three lead storage battery plants and a group of 181 workers employed in an industry which did not involve lead exposure. The study was conducted from 1982-83. Comparisons of the lead exposure indices with the dependent variables were made through univariate correlational and hierarchical regression analyses. The lead exposure index, ZPP, was significantly associated wit BUN levels, though less than three percent of the lead and control workers had BUN levels above the normal range, In addition, NPP, was negatively associated with hemoglobin levels at probability levels between 0.052 and 0.055. Furthermore, there were no hemoglobin levels outside of the normal range for any of the sites studied. The other lead exposure index, TWA, was significantly associated with alkaline phosphatase and triglycerides. However, these analyses were not age-adjusted.« less

Time discounting and the body mass index. Evidence from the Netherlands.

PubMed

Borghans, Lex; Golsteyn, Bart H H

2006-01-01

In many Western countries, the relative weight of people -- measured by the body mass index (BMI) -- has increased substantially in recent years, leading to an increasing incidence of overweight and related health problems. As with many forms of risky behavior, it is plausible that overweight is related to the individual discount rate. Increases in credit card debts, the rise in gambling and the development of a more hedonic life style, suggest that the average discount rate has increased over time. An increase in time discounting may be a contributing factor in the rise in BMI. Applying a large set of indicators for the individual discount rate from a Dutch survey, this paper analyzes whether changes in time discounting can account for differences in body mass between individuals at a given point in time and whether changes in the average individual discount rate can explain the remarkable increase in BMI experienced in recent years in the Netherlands. We find some evidence for a link between time discounting and differences in BMI between people, but this relationship depends strongly on the choice of the proxy for the discount rate. Giving our hypothesis the best chance, we analyze the development of the time discounting proxies that are most strongly related to BMI. We find no evidence for a change of these proxies over time. Our main conclusion therefore is that overweight might be related to the way people discount future health benefits, but the increase in BMI is more likely explained by shifts in other parameters that determine the intertemporal decisions regarding the trade-off of current and future health and satisfaction.

Accelerating Chemical Discovery with Machine Learning: Simulated Evolution of Spin Crossover Complexes with an Artificial Neural Network.

PubMed

Janet, Jon Paul; Chan, Lydia; Kulik, Heather J

2018-03-01

Machine learning (ML) has emerged as a powerful complement to simulation for materials discovery by reducing time for evaluation of energies and properties at accuracy competitive with first-principles methods. We use genetic algorithm (GA) optimization to discover unconventional spin-crossover complexes in combination with efficient scoring from an artificial neural network (ANN) that predicts spin-state splitting of inorganic complexes. We explore a compound space of over 5600 candidate materials derived from eight metal/oxidation state combinations and a 32-ligand pool. We introduce a strategy for error-aware ML-driven discovery by limiting how far the GA travels away from the nearest ANN training points while maximizing property (i.e., spin-splitting) fitness, leading to discovery of 80% of the leads from full chemical space enumeration. Over a 51-complex subset, average unsigned errors (4.5 kcal/mol) are close to the ANN's baseline 3 kcal/mol error. By obtaining leads from the trained ANN within seconds rather than days from a DFT-driven GA, this strategy demonstrates the power of ML for accelerating inorganic material discovery.

Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate

NASA Astrophysics Data System (ADS)

Mishra, C.; Samantaray, A. K.; Chakraborty, G.

2016-05-01

Rolling element bearings are widely used in rotating machines and their faults can lead to excessive vibration levels and/or complete seizure of the machine. Under special operating conditions such as non-uniform or low speed shaft rotation, the available fault diagnosis methods cannot be applied for bearing fault diagnosis with full confidence. Fault symptoms in such operating conditions cannot be easily extracted through usual measurement and signal processing techniques. A typical example is a bearing in heavy rolling mill with variable load and disturbance from other sources. In extremely slow speed operation, variation in speed due to speed controller transients or external disturbances (e.g., varying load) can be relatively high. To account for speed variation, instantaneous angular position instead of time is used as the base variable of signals for signal processing purposes. Even with time synchronous averaging (TSA) and well-established methods like envelope order analysis, rolling element faults in rolling element bearings cannot be easily identified during such operating conditions. In this article we propose to use order tracking on the envelope of the wavelet de-noised estimate of the short-duration angle synchronous averaged signal to diagnose faults in rolling element bearing operating under the stated special conditions. The proposed four-stage sequential signal processing method eliminates uncorrelated content, avoids signal smearing and exposes only the fault frequencies and its harmonics in the spectrum. We use experimental data1

A novel active-passive sampling approach for measuring time-averaged concentrations of pollutants in water.

PubMed

Amato, Elvio D; Covaci, Adrian; Town, Raewyn M; Hereijgers, Jonas; Bellekens, Ben; Giacometti, Valentina; Breugelmans, Tom; Weyn, Maarten; Dardenne, Freddy; Bervoets, Lieven; Blust, Ronny

2018-06-14

Passive sampling with in situ devices offers several advantages over traditional sampling methods (i.e., discrete spot sampling), however, data interpretation from conventional passive samplers is hampered by difficulties in estimating the thickness of the diffusion layer at the sampler/medium interface (δ), often leading to inaccurate determinations of target analyte concentrations. In this study, the performance of a novel device combining active and passive sampling was investigated in the laboratory. The active-passive sampling (APS) device is comprised of a diffusion cell fitted with a pump and a flowmeter. Three receiving phases traditionally used in passive sampling devices (i.e., chelex resin, Oasis HLB, and silicone rubber), were incorporated in the diffusion cell and allowed the simultaneous accumulation of cationic metals, polar, and non-polar organic compounds, respectively. The flow within the diffusion cell was accurately controlled and monitored, and, combined with diffusion coefficients measurements, enabled the average δ to be estimated. Strong agreement between APS and time-averaged total concentrations measured in discrete water samples was found for most of the substances investigated. Accuracies for metals ranged between 87 and 116%, except Cu and Pb (∼50%), whilst accuracies between 64 and 101%, and 92 and 151% were achieved for polar and non-polar organic compounds, respectively. These results indicate that, via a well-defined in situ preconcentration step, the proposed APS approach shows promise for monitoring the concentration of a range of pollutants in water. Copyright © 2018 Elsevier Ltd. All rights reserved.

Organizational factors affecting length of stay in the emergency department: initial observational study.

PubMed

Bashkin, Osnat; Caspi, Sigalit; Haligoa, Rachel; Mizrahi, Sari; Stalnikowicz, Ruth

2015-01-01

Length of stay (LOS) is considered a key measure of emergency department throughput, and from the perspective of the patient, it is perceived as a measure of healthcare service quality. Prolonged LOS can be caused by various internal and external factors. This study examined LOS in the emergency department and explored the main factors that influence LOS and cause delay in patient care. Observations of 105 patients were performed over a 3-month period at the emergency room of a community urban hospital. Observers monitored patients from the moment of entrance to the department until discharge or admission to another hospital ward. Analysis revealed a general average total emergency department LOS of 438 min. Significant differences in average LOS were found between admitted patients (Mean = 544 min, SD = 323 min) and discharged patients (Mean = 291 min, SD = 286 min). In addition, nurse and physician change of shifts and admissions to hospital wards were found to be significant factors associated with LOS. Using an Ishikawa causal diagram, we explored various latent organizational factors that may prolong this time. The study identified several factors that are associated with high average emergency department LOS. High LOS may lead to increases in expenditures and may have implications for patient safety, whereas certain organizational changes, communication improvement, and time management may have a positive effect on it. Interdisciplinary methods can be used to explore factors causing prolonged emergency department LOS and contribute to a better understanding of them.

Leaded eyeglasses substantially reduce radiation exposure of the surgeon's eyes during acquisition of typical fluoroscopic views of the hip and pelvis.

PubMed

Burns, Sean; Thornton, Raymond; Dauer, Lawrence T; Quinn, Brian; Miodownik, Daniel; Hak, David J

2013-07-17

Despite recommendations to do so, few orthopaedists wear leaded glasses when performing operative fluoroscopy. Radiation exposure to the ocular lens causes cataracts, and regulatory limits for maximum annual occupational exposure to the eye continue to be revised downward. Using anthropomorphic patient and surgeon phantoms, radiation dose at the surgeon phantom's lens was measured with and without leaded glasses during fluoroscopic acquisition of sixteen common pelvic and hip views. The magnitude of lens dose reduction from leaded glasses was calculated by dividing the unprotected dose by the dose measured behind leaded glasses. On average, the use of leaded glasses reduced radiation to the surgeon phantom's eye by tenfold, a 90% reduction in dose. However, there was widespread variation in the amount of radiation that reached the phantom surgeon's eye among the various radiographic projections we studied. Without leaded glasses, the dose measured at the surgeon's lens varied more than 250-fold among these sixteen different views. In addition to protecting the surgeon's eye from the deleterious effects of radiation, the use of leaded glasses could permit an orthopaedist to perform fluoroscopic views on up to ten times more patients before reaching the annual dose limit of 20 mSv of radiation to the eye recommended by the International Commission on Radiological Protection. Personal safety and adherence to limits of occupational radiation exposure should compel orthopaedists to wear leaded glasses for fluoroscopic procedures if other protective barriers are not in use. Leaded glasses are a powerful tool for reducing the orthopaedic surgeon's lens exposure to radiation during acquisition of common intraoperative fluoroscopic views.

Time averaging, ageing and delay analysis of financial time series

NASA Astrophysics Data System (ADS)

Cherstvy, Andrey G.; Vinod, Deepak; Aghion, Erez; Chechkin, Aleksei V.; Metzler, Ralf

2017-06-01

We introduce three strategies for the analysis of financial time series based on time averaged observables. These comprise the time averaged mean squared displacement (MSD) as well as the ageing and delay time methods for varying fractions of the financial time series. We explore these concepts via statistical analysis of historic time series for several Dow Jones Industrial indices for the period from the 1960s to 2015. Remarkably, we discover a simple universal law for the delay time averaged MSD. The observed features of the financial time series dynamics agree well with our analytical results for the time averaged measurables for geometric Brownian motion, underlying the famed Black-Scholes-Merton model. The concepts we promote here are shown to be useful for financial data analysis and enable one to unveil new universal features of stock market dynamics.

Sub-10-Minute Characterization of an Ultrahigh Molar Mass Polymer by Multi-detector Hydrodynamic Chromatography

USDA-ARS?s Scientific Manuscript database

Molar mass averages, distributions, and architectural information of polymers are routinely obtained using size-exclusion chromatography (SEC). It has previously been shown that ultrahigh molar mass polymers may experience degradation during SEC analysis, leading to inaccurate molar mass averages a...

Ultraviolet Spectral Behavior of TVCol During and After Flaring Activity

NASA Astrophysics Data System (ADS)

Sanad, M. R.; Abdel-Sabour, M. A.

2018-01-01

We studied the intermediate polar TVCol during and after its flare in November 1982 observed in the ultraviolet range with the International Ultraviolet Explorer. Two spectra revealing the variations of emission lines at different times are presented. We have estimated a new value of the reddening from the 2200 Å absorption feature, E ( B - V ) = 0.12 ± 0.02, and calculated the line fluxes of C IV and He II emission lines produced in the outer accretion disk. The average ultraviolet luminosity of emitting region during and after the flare is approximately 4 × 1032 erg s-1 and 9 × 1030 erg s-1, the corresponding average mass accretion rate is nearly 3 × 1015 erg s-1 (4.76 × 10-11 M ⊙ yr-1) and 5 × 1013 erg s-1 (7.93 × 10-13 M ⊙ yr-1), and the average temperature of the emitting region during and after flare is estimated to be of about 3.5 × 103 K and 2 × 103 K. We attribute this flare to a sudden increase in the mass accretion rate leading to the outburst activity.

Towards the control of the modal energy transfer in transverse mode instabilities

NASA Astrophysics Data System (ADS)

Stihler, Christoph; Jauregui, Cesar; Tünnermann, Andreas; Limpert, Jens

2018-02-01

Thermally-induced refractive index gratings (RIG) in high-power fiber laser systems lead to transverse mode instabilities (TMI) above a certain average power threshold. The effect of TMI is currently the main limitation for the further average power scaling of fiber lasers and amplifiers with nearly diffraction-limited beam quality. In this work we experimentally investigate, for the first time, the growth of the RIG strength by introducing a phase-shift between the RIG and the modal interference pattern in a fiber amplifier. The experiments reveal that the RIG is strong enough to couple energy between different transverse modes even at powers significantly below the TMI threshold, provided that the introduced phase-shift is high enough. This indicates that, as the strength of the RIG further increases with increasing average output power, the RIG becomes more and more sensitive to even small noise-induced phase-shifts, which ultimately trigger TMI. Furthermore, it is shown that a beam cleaning also occurs when a positive phase-shift is introduced, even above the TMI threshold. This finding will pave the way for the development of a new class of mitigation strategies for TMI, which key feature is the control of the introduced phase-shift.

Investigating the relationship between neighborhood poverty and mortality risk: A marginal structural modeling approach

PubMed Central

Do, D. Phuong; Wang, Lu; Elliott, Michael R.

2013-01-01

Extant observational studies generally support the existence of a link between neighborhood context and health. However, estimating the causal impact of neighborhood effects from observational data has proven to be a challenge. Omission of relevant factors may lead to overestimating the effects of neighborhoods on health while inclusion of time-varying confounders that may also be mediators (e.g., income, labor force status) may lead to underestimation. Using longitudinal data from the 1990 to 2007 years of the Panel Study of Income Dynamics, this study investigates the link between neighborhood poverty and overall mortality risk. A marginal structural modeling strategy is employed to appropriately adjust for simultaneous mediating and confounding factors. To address the issue of possible upward bias from the omission of key variables, sensitivity analysis to assess the robustness of results against unobserved confounding is conducted. We examine two continuous measures of neighborhood poverty – single-point and a running average. Both were specified as piece-wise linear splines with a knot at 20 percent. We found no evidence from the traditional naïve strategy that neighborhood context influences mortality risk. In contrast, for both the single-point and running average neighborhood poverty specifications, the marginal structural model estimates indicated a statistically significant increase in mortality risk with increasing neighborhood poverty above the 20 percent threshold. For example, below 20 percent neighborhood poverty, no association was found. However, after the 20 percent poverty threshold is reached, each 10 percentage point increase in running average neighborhood poverty was found to increase the odds for mortality by 89 percent [95% CI = 1.22, 2.91]. Sensitivity analysis indicated that estimates were moderately robust to omitted variable bias. PMID:23849239

Evidence of the Internalization of Animal Caliciviruses via the Roots of Growing Strawberry Plants and Dissemination to the Fruit

PubMed Central

DiCaprio, Erin; Culbertson, Doug

2015-01-01

Human norovirus (NoV) is the leading cause of foodborne disease in the United States, and epidemiological studies have shown that fresh produce is one of the major vehicles for the transmission of human NoV. However, the mechanisms of norovirus contamination and persistence in fresh produce are poorly understood. The objective of this study is to determine whether human NoV surrogates, murine norovirus (MNV-1) and Tulane virus (TV), can attach and become internalized and disseminated in strawberries grown in soil. The soil of growing strawberry plants was inoculated with MNV-1 and TV at a level of 108 PFU/plant. Leaves and berries were harvested over a 14-day period, and the viral titer was determined by plaque assay. Over the course of the study, 31.6% of the strawberries contained internalized MNV-1, with an average titer of 0.81 ± 0.33 log10 PFU/g. In comparison, 37.5% of strawberries were positive for infectious TV, with an average titer of 1.83 ± 0.22 log10 PFU/g. A higher percentage (78.7%) of strawberries were positive for TV RNA, with an average titer of 3.15 ± 0.51 log10 RNA copies/g as determined by real-time reverse transcriptase quantitative PCR (RT-qPCR). In contrast, no or little virus internalization and dissemination were detected when TV was inoculated into bell peppers grown in soil. Collectively, these data demonstrate (i) virally contaminated soils can lead to the internalization of virus via plant roots and subsequent dissemination to the leaf and fruit portions of growing strawberry plants and (ii) the magnitude of internalization is dependent on the type of virus and plant. PMID:25662970

Evaluation of a pulmonary strain model by registration of dynamic CT scans

NASA Astrophysics Data System (ADS)

Pomeroy, Marc; Liang, Zhengrong; Brehm, Anthony

2017-03-01

Idiopathic pulmonary fibrosis (IPF) is a chronic fibrotic lung disease that develops in adults without any known cause. It is an interstitial lung disease in which the lung tissue becomes scarred and stiffens, ultimately leading to respiratory failure. This disease currently has no cure with limited treatment options, leading to an average survival time of 3-5 years after diagnosis. In this paper we employ a mathematical model simulating the lung parenchyma as hexagons with elastic forces applied to connecting vertices and opposing vertices. Using an image registration algorithm, we obtain trajectories of 4D-CT scans of a healthy patient, and one suffering from IPF. Converting the image trajectories into a hexagonal lattice, we fit the model parameters to match the respiratory motion seen for both patients across multiple image slices. We found the model could decently describe the healthy lung slices, with a minimum average error between corresponding vertices to be 1.66 mm. For the fibrotic lung slices the model was less accurate, maintaining a higher average error across all slices. Using the optimized parameters, we apply the forces predicted from the model using the image trajectory positions for each phase. Although the error is large, the spring constant values determined for the fibrotic patient were not as high as we expected, and more often than not determined to be lower than corresponding healthy lung slices. However, the net force distribution for some of those slices was still found to be greater than the healthy lung counterparts. Other modifications to the model, including additional directional components and which vertices were receiving with the limited sample size available, a clear distinction between the healthy and fibrotic lung cannot yet be made by this model.

Time series analysis of temporal networks

NASA Astrophysics Data System (ADS)

Sikdar, Sandipan; Ganguly, Niloy; Mukherjee, Animesh

2016-01-01

A common but an important feature of all real-world networks is that they are temporal in nature, i.e., the network structure changes over time. Due to this dynamic nature, it becomes difficult to propose suitable growth models that can explain the various important characteristic properties of these networks. In fact, in many application oriented studies only knowing these properties is sufficient. For instance, if one wishes to launch a targeted attack on a network, this can be done even without the knowledge of the full network structure; rather an estimate of some of the properties is sufficient enough to launch the attack. We, in this paper show that even if the network structure at a future time point is not available one can still manage to estimate its properties. We propose a novel method to map a temporal network to a set of time series instances, analyze them and using a standard forecast model of time series, try to predict the properties of a temporal network at a later time instance. To our aim, we consider eight properties such as number of active nodes, average degree, clustering coefficient etc. and apply our prediction framework on them. We mainly focus on the temporal network of human face-to-face contacts and observe that it represents a stochastic process with memory that can be modeled as Auto-Regressive-Integrated-Moving-Average (ARIMA). We use cross validation techniques to find the percentage accuracy of our predictions. An important observation is that the frequency domain properties of the time series obtained from spectrogram analysis could be used to refine the prediction framework by identifying beforehand the cases where the error in prediction is likely to be high. This leads to an improvement of 7.96% (for error level ≤20%) in prediction accuracy on an average across all datasets. As an application we show how such prediction scheme can be used to launch targeted attacks on temporal networks. Contribution to the Topical Issue "Temporal Network Theory and Applications", edited by Petter Holme.

Electron acceleration by an obliquely propagating electromagnetic wave in the regime of validity of the Fokker-Planck-Kolmogorov approach

NASA Technical Reports Server (NTRS)

Hizanidis, Kyriakos; Vlahos, L.; Polymilis, C.

1989-01-01

The relativistic motion of an ensemble of electrons in an intense monochromatic electromagnetic wave propagating obliquely in a uniform external magnetic field is studied. The problem is formulated from the viewpoint of Hamiltonian theory and the Fokker-Planck-Kolmogorov approach analyzed by Hizanidis (1989), leading to a one-dimensional diffusive acceleration along paths of constant zeroth-order generalized Hamiltonian. For values of the wave amplitude and the propagating angle inside the analytically predicted stochastic region, the numerical results suggest that the diffusion probes proceeds in stages. In the first stage, the electrons are accelerated to relatively high energies by sampling the first few overlapping resonances one by one. During that stage, the ensemble-average square deviation of the variable involved scales quadratically with time. During the second stage, they scale linearly with time. For much longer times, deviation from linear scaling slowly sets in.

Implementation of lean manufacturing for frozen fish process at PT. XYZ

NASA Astrophysics Data System (ADS)

Setiyawan, D. T.; Pertiwijaya, H. R.; Effendi, U.

2018-03-01

PT. XYZ is a company specialized in the processing of fishery products particularly in frozen fish fillet. The purpose of this research was to identify the type of waste and determine the recommendations of minimizing waste Lean manufacturing approach was used in the identification of waste by describing the Value Stream Mapping (VSM) and selecting tools in the Value Stream Analysis Tools (VALSAT). The results of this research showed that the highest waste that generated was the defect of leak packaging on fillet products with an average of 1.21%. In addition to defect, other insufficiencies were found such as: unnecessary motion, unnecessary overhead, and waiting time. Recommendations for improvements that given include reduction of time at several stages of the process, making production schedules, and conducting regular machine maintenance. VSM analysis shows reduced lead time of 582.04 minutes to 572.01 minutes.

The optimization of total laboratory automation by simulation of a pull-strategy.

PubMed

Yang, Taho; Wang, Teng-Kuan; Li, Vincent C; Su, Chia-Lo

2015-01-01

Laboratory results are essential for physicians to diagnose medical conditions. Because of the critical role of medical laboratories, an increasing number of hospitals use total laboratory automation (TLA) to improve laboratory performance. Although the benefits of TLA are well documented, systems occasionally become congested, particularly when hospitals face peak demand. This study optimizes TLA operations. Firstly, value stream mapping (VSM) is used to identify the non-value-added time. Subsequently, batch processing control and parallel scheduling rules are devised and a pull mechanism that comprises a constant work-in-process (CONWIP) is proposed. Simulation optimization is then used to optimize the design parameters and to ensure a small inventory and a shorter average cycle time (CT). For empirical illustration, this approach is applied to a real case. The proposed methodology significantly improves the efficiency of laboratory work and leads to a reduction in patient waiting times and increased service level.

Continuous high speed coherent one-way quantum key distribution.

PubMed

Stucki, Damien; Barreiro, Claudio; Fasel, Sylvain; Gautier, Jean-Daniel; Gay, Olivier; Gisin, Nicolas; Thew, Rob; Thoma, Yann; Trinkler, Patrick; Vannel, Fabien; Zbinden, Hugo

2009-08-03

Quantum key distribution (QKD) is the first commercial quantum technology operating at the level of single quanta and is a leading light for quantum-enabled photonic technologies. However, controlling these quantum optical systems in real world environments presents significant challenges. For the first time, we have brought together three key concepts for future QKD systems: a simple high-speed protocol; high performance detection; and integration both, at the component level and for standard fibre network connectivity. The QKD system is capable of continuous and autonomous operation, generating secret keys in real time. Laboratory and field tests were performed and comparisons made with robust InGaAs avalanche photodiodes and superconducting detectors. We report the first real world implementation of a fully functional QKD system over a 43 dB-loss (150 km) transmission line in the Swisscom fibre optic network where we obtained average real-time distribution rates over 3 hours of 2.5 bps.

Surface plasmon resonance optical cavity enhanced refractive index sensing.

PubMed

Giorgini, A; Avino, S; Malara, P; Gagliardi, G; Casalino, M; Coppola, G; Iodice, M; Adam, P; Chadt, K; Homola, J; De Natale, P

2013-06-01

We report on a method for surface plasmon resonance (SPR) refractive index sensing based on direct time-domain measurements. An optical resonator is built around an SPR sensor, and its photon lifetime is measured as a function of loss induced by refractive index variations. The method does not rely on any spectroscopic analysis or direct intensity measurement. Time-domain measurements are practically immune to light intensity fluctuations and thus lead to high resolution. A proof of concept experiment is carried out in which a sensor response to liquid samples of different refractive indices is measured. A refractive index resolution of the current system, extrapolated from the reproducibility of cavity-decay time determinations over 133 s, is found to be about 10(-5) RIU. The possibility of long-term averaging suggests that measurements with a resolution better than 10(-7) RIU/√Hz are within reach.

Impedance spectroscopy and microstructural characterization of the corrosion behavior of FeCrAl alloy in lead-bismuth eutectic

NASA Astrophysics Data System (ADS)

Chen, Xiang; Haasch, Rick; Stubbins, James F.

2012-12-01

The corrosion behavior of FeCrAl alloy in Lead-Bismuth Eutectic (LBE) saturated with oxygen at 550 °C was investigated. Impedance Spectroscopy (IS) measurement was made continuously on one specimen during the entire LBE exposure test to characterize the corrosion kinetics. Various microanalysis techniques, including SEM, EDS, XRD, AES, and XPS were used to analyze the corrosion products of post-exposure specimens. It was found that a very thin, adherent alumina oxide layer formed on the specimen surface and was able to protect the alloy from the corrosion attack in LBE. The thickness of the alumina surface layer increased very slowly with time reaching about 837 nm in average thickness after exposure for 3600-h in LBE. The IS measurements match the microanalysis results in three respects: first, a non-zero impedance measurement agrees with the existence of a continuous surface oxide layer; second, a general increase of the impedance was observed during the real-time IS measurement which means that the IS measurements reflect the growth rate of the oxide layer; and third, the oxide film thickness derived from the IS data compares favorably with the SEM film thickness measurements which establishes the validity of using IS to monitor the real-time corrosion kinetics of alloys in LBE.

Scented guide ropes as a method to enhance brown treesnake (Boiga irregularis) trap capture success on Guam

USGS Publications Warehouse

Mason, L.C.; Savidge, J.A.; Rodda, G.H.; Yackel Adams, A.A.

2011-01-01

Current methods for controlling the invasive Brown Treesnake (Boiga irregularis) on Guam include a modified minnow trap with a live mouse lure. We investigated the effects on capture success of augmenting these traps with scented guide ropes leading to trap entrances. Initial screening of scent preferences was based on time spent in scented and unscented arms of a Y-maze. Preferences of large and small snakes were scored for six different prey scents (live and carrion gecko, skink, and mouse). Large snakes spent more time in the maze arm scented with live gecko and carrion gecko, whereas small snakes spent more time in the arm scented with carrion mouse and carrion gecko. After the laboratory study, a pilot trapping session was conducted in the field using three treatments (live mouse-scented ropes, carrion gecko-scented ropes, and carrion mouse-scented ropes) and two controls (traps with unscented guide ropes and those with no ropes attached). Contrary to laboratory results, live mouse-scented ropes were most effective. We conducted a second trapping session using live mouse-scented ropes as well as the two controls used in the pilot study. For snakes of below-average to average condition, the number of captures for traps with live mouse-scented ropes was higher than for traps with no ropes. However, for snakes of above-average condition, there were no differences in capture rates between trap treatments. Overall, treatment effects were weaker than latent individual heterogeneity and the influence of snake body size, with large snakes trapped more readily. ?? 2011 Society for the Study of Amphibians and Reptiles.

Air pollution and daily mortality: A new approach to an old problem

NASA Astrophysics Data System (ADS)

Lipfert, Frederick W.; Murray, Christian J.

2012-08-01

Many time-series studies find associations between acute health effects and ambient air quality under current conditions. However, few such studies link mortality with morbidity to provide rational bases for improving public health. This paper describes a research project that developed and validated a new modeling approach directly addressing changes in life expectancies and the prematurity of deaths associated with transient changes in air quality. We used state-space modeling and Kalman filtering of elderly Philadelphia mortality counts from 1974-88 to estimate the size of the population at highest risk of imminent death. This subpopulation appears stable over time but is sensitive to season and to environmental factors: ambient temperature, ozone, and total suspended particulate matter (TSP), as an index of airborne particles in this demonstration of methodology. This population at extreme risk averages fewer than 0.1% of the elderly. By considering successively longer lags or moving averages of TSP, we find that cumulative short-term effects on entry to the at-risk pool tend to level off and decrease as periods of exposure longer than a few days are considered. These estimated environmental effects on the elderly are consistent with previous analyses using conventional time-series methods. However, this new model suggests that such environmentally linked deaths comprise only about half of the subjects whose frailty is associated with environmental factors. The average life expectancy of persons in the at-risk pool is estimated to be 5-7 days, which may be reduced by less than one day by environmental effects. These results suggest that exposures leading up to severe acute frailty and subsequent risk of imminent death may be more important from a public health perspective than those directly associated with subsequent mortality.