Cervical cancer risk levels in Turkey and compliance to the national cervical cancer screening standard.

PubMed

Açikgöz, Ayla; Ergör, Gül

2011-01-01

Cervical cancer screening with Pap smear test is a cost-effective method. The Ministry of Health in Turkey recommends that it be performed once every five years after age 35. The purpose of this study was to determine the cervical cancer risk levels of women between 35 and 69, and the intervals they have the Pap smear test, and to investigate the relation between the two. This study was performed on 227 women aged between 35 and 69 living in Balçova District of İzmir province. Using the cervical cancer risk index program of Harvard School of Public Health, the cervical cancer risk level of 70% of the women was found below average, 22.1% average, and 7.9% above average. Only 52% of the women have had Pap smear test at least once in their lives. The percentage screening regularly in conformity with the national screening standard was 39.2%. Women in the 40-49 age group, were married, conformed significantly more (p<0.05) to the national screening standard. Compliance also increased with the level of education and decreased with the cervical cancer risk level (p<0.05). A logistic regression model was constructed including age, education level, menstruation state of the women and the economic level of the family. Not having the Pap smear test in conformity with the national cervical cancer screening standard in 35-39 age group was 2.52 times more than 40-49 age group, while it was 3.26 times more in 60-69 age group (p< 0.05). Not having Pap smear test in 35-39 age group more than other groups might result from lack of information on the cervical cancer national screening standard and the necessity of having Pap smear test. As for 60-69 age group, the low education level might cause not having Pap smear test. Under these circumstances, the cervical cancer risk levels should be determined and the individuals should be informed. Providing Pap smear test screening service to individuals in the target group of national screening standard, as a public service may resolve the inequalities due to age and educational differences.

The Objective Borderline Method: A Probabilistic Method for Standard Setting

ERIC Educational Resources Information Center

Shulruf, Boaz; Poole, Phillippa; Jones, Philip; Wilkinson, Tim

2015-01-01

A new probability-based standard setting technique, the Objective Borderline Method (OBM), was introduced recently. This was based on a mathematical model of how test scores relate to student ability. The present study refined the model and tested it using 2500 simulated data-sets. The OBM was feasible to use. On average, the OBM performed well…

Does Television Rot Your Brain? New Evidence from the Coleman Study. NBER Working Paper No. 12021

ERIC Educational Resources Information Center

Gentzkow, Matthew; Shapiro, Jesse M.

2006-01-01

We use heterogeneity in the timing of television's introduction to different local markets to identify the effect of preschool television exposure on standardized test scores later in life. Our preferred point estimate indicates that an additional year of preschool television exposure raises average test scores by about .02 standard deviations. We…

Predicting Student Grade Point Average at a Community College from Scholastic Aptitude Tests and from Measures Representing Three Constructs in Vroom's Expectancy Theory Model of Motivation.

ERIC Educational Resources Information Center

Malloch, Douglas C.; Michael, William B.

1981-01-01

This study was designed to determine whether an unweighted linear combination of community college students' scores on standardized achievement tests and a measure of motivational constructs derived from Vroom's expectance theory model of motivation was predictive of academic success (grade point average earned during one quarter of an academic…

Gauging Item Alignment through Online Systems While Controlling for Rater Effects

ERIC Educational Resources Information Center

Anderson, Daniel; Irvin, Shawn; Alonzo, Julie; Tindal, Gerald A.

2015-01-01

The alignment of test items to content standards is critical to the validity of decisions made from standards-based tests. Generally, alignment is determined based on judgments made by a panel of content experts with either ratings averaged or via a consensus reached through discussion. When the pool of items to be reviewed is large, or the…

Summary of new test dummies, injury criteria

DOT National Transportation Integrated Search

2000-06-17

Besides a plethora of new tests, the air bag standard issued recently calls for four new test dummies in addition to the average size adult male already used in testing: small adult female; 6 year old child; 3 year old child; and 1 year old infant. I...

12 CFR 252.154 - Annual stress test.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Annual stress test. 252.154 Section 252.154... (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements for Banking... stress test. (a) General requirements—(1) Savings and loan holding companies with average total...

12 CFR 252.154 - Annual stress test.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Annual stress test. 252.154 Section 252.154... (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements for Banking... stress test. (a) General requirements—(1) Savings and loan holding companies with average total...

40 CFR Table 2 to Subpart Ffff of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour rolling averages measured using CEMS b...

40 CFR Table 2 to Subpart Ffff of... - Model Rule-Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour rolling averages measured using CEMS b...

Operational frequency stability of rubidium and cesium frequency standards

NASA Technical Reports Server (NTRS)

Lavery, J. E.

1973-01-01

The frequency stabilities under operational conditions of several commercially available rubidium and cesium frequency standards were determined from experimental data for frequency averaging times from 10 to the 7th power s and are presented in table and graph form. For frequency averaging times between 10 to the 5th power and 10 to the 7th power s, the rubidium standards tested have a stability of between 10 to the minus 12th power and 5 x 10 to the minus 12th power, while the cesium standards have a stability of between 2 x 10 to the minus 13th power and 5 x 10 to the minus 13th power.

The Role of Instructional Quality within School Sectors: A Multi-Level Analysis

ERIC Educational Resources Information Center

Miller, Saralyn J.

2013-01-01

On average, private school students outperform public school students on standardized tests. Research confirms these differences in student scores, but also shows that when student background characteristics are controlled, on average, public school students outperform private school students. Explaining achievement differences between sectors…

Estimating site index of ponderosa pine in Northern California...standard curves, soil series, stem analysis

Treesearch

Robert F. Powers

1972-01-01

Four sets of standard site index curves based on statewide or regionwide averages were compared with data on natural growth from nine young stands of ponderosa pine in northern California. The curves tested were by Meyer; Dunning; Dunning and Reineke; and Arvanitis, Lindquist, and Palley. The effects of soils on height growth were also studied. Among the curves tested...

Methods for estimating flood frequency in Montana based on data through water year 1998

USGS Publications Warehouse

Parrett, Charles; Johnson, Dave R.

2004-01-01

Annual peak discharges having recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years (T-year floods) were determined for 660 gaged sites in Montana and in adjacent areas of Idaho, Wyoming, and Canada, based on data through water year 1998. The updated flood-frequency information was subsequently used in regression analyses, either ordinary or generalized least squares, to develop equations relating T-year floods to various basin and climatic characteristics, equations relating T-year floods to active-channel width, and equations relating T-year floods to bankfull width. The equations can be used to estimate flood frequency at ungaged sites. Montana was divided into eight regions, within which flood characteristics were considered to be reasonably homogeneous, and the three sets of regression equations were developed for each region. A measure of the overall reliability of the regression equations is the average standard error of prediction. The average standard errors of prediction for the equations based on basin and climatic characteristics ranged from 37.4 percent to 134.1 percent. Average standard errors of prediction for the equations based on active-channel width ranged from 57.2 percent to 141.3 percent. Average standard errors of prediction for the equations based on bankfull width ranged from 63.1 percent to 155.5 percent. In most regions, the equations based on basin and climatic characteristics generally had smaller average standard errors of prediction than equations based on active-channel or bankfull width. An exception was the Southeast Plains Region, where all equations based on active-channel width had smaller average standard errors of prediction than equations based on basin and climatic characteristics or bankfull width. Methods for weighting estimates derived from the basin- and climatic-characteristic equations and the channel-width equations also were developed. The weights were based on the cross correlation of residuals from the different methods and the average standard errors of prediction. When all three methods were combined, the average standard errors of prediction ranged from 37.4 percent to 120.2 percent. Weighting of estimates reduced the standard errors of prediction for all T-year flood estimates in four regions, reduced the standard errors of prediction for some T-year flood estimates in two regions, and provided no reduction in average standard error of prediction in two regions. A computer program for solving the regression equations, weighting estimates, and determining reliability of individual estimates was developed and placed on the USGS Montana District World Wide Web page. A new regression method, termed Region of Influence regression, also was tested. Test results indicated that the Region of Influence method was not as reliable as the regional equations based on generalized least squares regression. Two additional methods for estimating flood frequency at ungaged sites located on the same streams as gaged sites also are described. The first method, based on a drainage-area-ratio adjustment, is intended for use on streams where the ungaged site of interest is located near a gaged site. The second method, based on interpolation between gaged sites, is intended for use on streams that have two or more streamflow-gaging stations.

MOSFET detectors in quality assurance of tomotherapy treatments.

PubMed

Cherpak, Amanda; Studinski, Ryan C N; Cygler, Joanna E

2008-02-01

The purpose of this work was to characterize metal oxide semiconductor field-effect transistors (MOSFETs) in a 6 MV conventional linac and investigate their use for quality assurance of radiotherapy treatments with a tomotherapy Hi-Art unit. High sensitivity and standard sensitivity MOSFETs were first calibrated and then tested for reproducibility, field size dependence, and accuracy of measuring surface dose in a 6 MV beam as well as in a tomotherapy Hi-Art unit. In vivo measurements were performed on both a RANDO phantom and several head and neck cancer patients treated with tomotherapy and compared to TLD measurements and treatment plan doses to evaluate the performance of MOSFETs in a high gradient radiation field. The average calibration factor found was 0.345+/-2.5%cGy/mV for the high sensitivity MOSFETs tested and 0.901+/-2.4%cGy/mV for the standard sensitivity MOSFETs. MOSFET measured surface doses had an average agreement with ion chamber measurements of 1.55% for the high sensitivity MOSFET and 5.23% for the standard sensitivity MOSFET when averaged over all trials and field sizes tested. No significant dependence on field size was found for the standard sensitivity MOSFETs, however a maximum difference of 5.34% was found for the high sensitivity MOSFET calibration factors in the field sizes tested. Measurements made with MOSFETS on head and neck patients treated on a tomotherapy Hi-Art unit had an average agreement of (3.26+/-0.03)% with TLD measurements, however the average of the absolute difference between the MOSFET measurements and the treatment plan skin doses was (12.2+/-7.5)%. The MOSFET measured patient skin doses also had good reproducibility, with inter-fraction deviations ranging from 1.4% to 6.6%. Similar results were found from trials using a RANDO phantom. The MOSFETs performed well when used in the tomotherapy Hi-Art unit and did not increase the overall treatment set-up time when used for patient measurements. It was found that MOSFETs are suitable detectors for surface dose measurements in both conventional beam and tomotherapy treatments and they can provide valuable skin dose information in areas where the treatment planning system may not be accurate.

Comparison of real-world and certification emission rates for light duty gasoline vehicles.

PubMed

Khan, Tanzila; Frey, H Christopher

2018-05-01

U.S. light duty vehicles are subject to the U.S. Environmental Protection Agency (EPA) emission standards. Emission compliance is determined by certification testing of selected emissions from representative vehicles on standard driving cycles using chassis dynamometers. Test results are also used in many emission inventories. The dynamometer based emission rates are adjusted to provide the certification levels (CL), which must be lower than the standards for compliance. Although standard driving cycles are based on specific observations of real-world driving, they are not necessarily real-world representative. A systematic comparison of the real-world emission rates of U.S. light duty gasoline vehicles (LDGVs) versus CL, and emission standards has not been previously reported. The purpose of this work is to compare regulatory limits (both CLs and emission standards) and the real-world emissions of LDGVs. The sensitivity of the comparisons to cold start emission was assessed. Portable Emission Measurement Systems (PEMS) were used to measure hot stabilized exhaust emissions of 122 LDGVs on a specified 110 mile test route. Cold start emissions were measured with PEMS for a selected vehicle sample of 32 vehicles. Emissions were measured for carbon dioxide (CO 2 ), carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NO x ). For each vehicle, a Vehicle Specific Power (VSP) modal emission rate model was developed. The VSP modal rates were weighted by the standard driving cycles and real-world driving cycles to estimate the respective cycle average emission rates (CAERs). Measured vehicles were matched with certification test vehicles for comparison. For systematic trends in comparison, vehicles were classified into four groups based on the Tier 1 and Tier 2 emission regulation, and the vehicle type such as passenger car and passenger truck. Depending on the cycle-pollutant and the vehicle groups, hot stabilized CAERs are on average either statistically significantly higher than or significantly not different from the CLs, with the exception of CO on the US06 cycle, for which real-world rates are lower than CLs. Compared to the emission standards, hot stabilized CAERs are on average significantly lower. However, comparisons of CAERs and standards are sensitive to cold start emissions. For some combinations of pollutants and vehicle groups, cold start inclusive CAERs are higher than the corresponding CLs and as high as the standards. The CLs, which are based on standard driving cycles, tend to underestimate real-world emission rates. Therefore, emission inventory estimates using certification test results are potentially underestimated. Copyright © 2017 Elsevier B.V. All rights reserved.

Stress Testing After Percutaneous Coronary Intervention in the Veterans Affairs HealthCare System: Insights from the Veterans Affairs Clinical Assessment, Reporting, and Tracking Program.

PubMed

Bradley, Steven M; Hess, Edward; Winchester, David E; Sussman, Jeremy B; Aggarwal, Vikas; Maddox, Thomas M; Barón, Anna E; Rumsfeld, John S; Ho, P Michael

2015-09-01

Stress testing after percutaneous coronary intervention (PCI) in fee-for-service settings is common and rates vary by hospital. Rates of stress testing after PCI within integrated healthcare systems, such as the Veterans Affairs (VA) are unknown. We evaluated all VA patients who underwent PCI from October 2007 through June 2010. To avoid the influence of Medicare eligibility on rates of stress testing use in the VA, we excluded Medicare eligible patients during the follow-up period. Hospital-level variation in risk-standardized rates of stress testing and the association with 1-year mortality and myocardial infarction was determined from Markov chain Monte Carlo methods. Among 10 293 patients undergoing PCI at 55 VA hospitals, 2239 (21.8%) had a stress test performed within 1 year of PCI and 3902 (37.9%) within 2 years. Most stress tests after PCI were performed with nuclear imaging (79.8%). The hospital-level risk-standardized rate of stress testing differed significantly from the average at 14 hospitals, with 8 (14.5%) hospitals significantly below and 6 (10.9%) hospitals significantly above the average stress testing rate. Hospital-level risk-standardized stress testing rates were not significantly correlated with risk-standardized mortality (Spearman ρ=-0.24; P=0.08) or myocardial infarction rates (Spearman ρ=0.20; P=0.14). In the VA, nearly 40% of patients underwent stress testing in the 2 years after PCI, which is a third less than published studies from other healthcare systems. However, stress testing rates varied across VA hospitals, suggesting opportunities to optimize the use of stress testing are still present in integrated healthcare systems. © 2015 American Heart Association, Inc.

The Impact of Proposed Radio Frequency Radiation Standards on Military Operations.

DTIC Science & Technology

1985-03-01

psychological testing has been accomplished on a number of the overexposees. The evaluators have, on occasion, attempted to draw some conclusions, but...NEUILLY- 6i UCAED THELLE E .MR 5hhhhI-0 /G618Eh1hEEhhhmhlhEmqhh 11. 11111 1.1 6 MICROCOPY RESOLUTION TEST CHART NATIONAL BUREAU OF STANDARDS 1963-A tod...series lasting approximately 3 to 4 minutes. Since the average of the staircase current during the period of each series of tests was slightly below the

Evaluation of a Test Article in the Salmonella typhimurium/Escherichia coli Plate Incorporation Mutation Assay in the Presence and Absence of Induced Rat Liver S-9. Test Article: N,N,N’,N’-tetramethyl ethanediamine (TMEDA)

DTIC Science & Technology

2008-06-12

15 14 15 STANDARD DEVIATION (:1:) 3 5 4 4 4 MINIMUM VALUE 9 12 11 8 10 MAXIMUM VALUE 20 33 23 29 24 N" 56 19 14 38 28 IMm ~ ~ CORN Oil l:W...AVERAGE 9 9 10 8 9 STANDARD DEVIATION (:1:) 3 3 4 2 3 MINIMUM VAlUE 2 6 3 5 4 MAXIMUM VAlUE 20 16 23 12 15 N" 65 21 14 33 29 E.COLI DMSO ~ CORN ...21 33 25 21 23 N* 66 19 14 38 28 :wm ~ ACET CORN Oil !L!! SAUNE AVERAGE 9 10 10 9 8 STANDARD DEVlA.11ON (:I:) 3 3 4 3 2 MINIMUM VAWS . 4 6 6 6 3

Thermal Vacuum Facility for Testing Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Knutson, Jeffrey R.; Sikora, Joseph G.

2002-01-01

A thermal vacuum facility for testing launch vehicle thermal protection systems by subjecting them to transient thermal conditions simulating re-entry aerodynamic heating is described. Re-entry heating is simulated by controlling the test specimen surface temperature and the environmental pressure in the chamber. Design requirements for simulating re-entry conditions are briefly described. A description of the thermal vacuum facility, the quartz lamp array and the control system is provided. The facility was evaluated by subjecting an 18 by 36 in. Inconel honeycomb panel to a typical re-entry pressure and surface temperature profile. For most of the test duration, the average difference between the measured and desired pressures was 1.6% of reading with a standard deviation of +/- 7.4%, while the average difference between measured and desired temperatures was 7.6% of reading with a standard deviation of +/- 6.5%. The temperature non-uniformity across the panel was 12% during the initial heating phase (t less than 500 sec.), and less than 2% during the remainder of the test.

Differential Prediction of College Performance between Gender.

ERIC Educational Resources Information Center

Patton, Timothy K.

Researchers in the past have found discrepancies in the prediction of college grade point average (GPA) between genders with the use of standardized tests such as the Scholastic Achievement Test (SAT) and the American College Test (ACT). These differences were studied to determine if the potential differences could be attributed to differential…

The average direct current offset values for small digital audio recorders in an acoustically consistent environment.

PubMed

Koenig, Bruce E; Lacey, Douglas S

2014-07-01

In this research project, nine small digital audio recorders were tested using five sets of 30-min recordings at all available recording modes, with consistent audio material, identical source and microphone locations, and identical acoustic environments. The averaged direct current (DC) offset values and standard deviations were measured for 30-sec and 1-, 2-, 3-, 6-, 10-, 15-, and 30-min segments. The research found an inverse association between segment lengths and the standard deviation values and that lengths beyond 30 min may not meaningfully reduce the standard deviation values. This research supports previous studies indicating that measured averaged DC offsets should only be used for exclusionary purposes in authenticity analyses and exhibit consistent values when the general acoustic environment and microphone/recorder configurations were held constant. Measured average DC offset values from exemplar recorders may not be directly comparable to those of submitted digital audio recordings without exactly duplicating the acoustic environment and microphone/recorder configurations. © 2014 American Academy of Forensic Sciences.

Performance of preproduction model cesium beam frequency standards for spacecraft applications

NASA Technical Reports Server (NTRS)

Levine, M. W.

1978-01-01

A cesium beam frequency standards for spaceflight application on Navigation Development Satellites was designed and fabricated and preliminary testing was completed. The cesium standard evolved from an earlier prototype model launched aboard NTS-2 and the engineering development model to be launched aboard NTS satellites during 1979. A number of design innovations, including a hybrid analog/digital integrator and the replacement of analog filters and phase detectors by clocked digital sampling techniques are discussed. Thermal and thermal-vacuum testing was concluded and test data are presented. Stability data for 10 to 10,000 seconds averaging interval, measured under laboratory conditions, are shown.

Stranger in Paradise: Process and Product in a District Office.

ERIC Educational Resources Information Center

McCleery, Mickey

In spite of opportunities for academic excellence, the 7,550 public school students of "Paradise Island" have average test scores well below statewide norms which, in turn, are below national averages. Sub-standard achievement in rural areas is a state-wide phenomenon which educators often explain in terms of isolation or minimal…

Dynamic testing and test anxiety amongst gifted and average-ability children.

PubMed

Vogelaar, Bart; Bakker, Merel; Elliott, Julian G; Resing, Wilma C M

2017-03-01

Dynamic testing has been proposed as a testing approach that is less disadvantageous for children who may be potentially subject to bias when undertaking conventional assessments. For example, those who encounter high levels of test anxiety, or who are unfamiliar with standardized test procedures, may fail to demonstrate their true potential or capabilities. While dynamic testing has proven particularly useful for special groups of children, it has rarely been used with gifted children. We investigated whether it would be useful to conduct a dynamic test to measure the cognitive abilities of intellectually gifted children. We also investigated whether test anxiety scores would be related to a progression in the children's test scores after dynamic training. Participants were 113 children aged between 7 and 8 years from several schools in the western part of the Netherlands. The children were categorized as either gifted or average-ability and split into an unguided practice or a dynamic testing condition. The study employed a pre-test-training-post-test design. Using linear mixed modelling analysis with a multilevel approach, we inspected the growth trajectories of children in the various conditions and examined the impact of ability and test anxiety on progression and training benefits. Dynamic testing proved to be successful in improving the scores of the children, although no differences in training benefits were found between gifted and average-ability children. Test anxiety was shown to influence the children's rate of change across all test sessions and their improvement in performance accuracy after dynamic training. © 2016 The British Psychological Society.

Speech Perception Abilities of Adults with Dyslexia: Is There Any Evidence for a True Deficit?

ERIC Educational Resources Information Center

Hazan, Valerie; Messaoud-Galusi, Souhila; Rosen, Stuart; Nouwens, Suzan; Shakespeare, Bethanie

2009-01-01

Purpose: This study investigated whether adults with dyslexia show evidence of a consistent speech perception deficit by testing phoneme categorization and word perception in noise. Method: Seventeen adults with dyslexia and 20 average readers underwent a test battery including standardized reading, language and phonological awareness tests, and…

40 CFR 63.11452 - What are the performance test requirements for new and existing sources?

Code of Federal Regulations, 2013 CFR

2013-07-01

... production rate for the performance test, kilograms (tons) of glass produced per hour. (v) Calculate the 3... = Average glass production rate for the performance test, kilograms (tons) of glass produced per hour. (v... Glass Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11452 What are...

40 CFR 63.11452 - What are the performance test requirements for new and existing sources?

Code of Federal Regulations, 2012 CFR

2012-07-01

... production rate for the performance test, kilograms (tons) of glass produced per hour. (v) Calculate the 3... = Average glass production rate for the performance test, kilograms (tons) of glass produced per hour. (v... Glass Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11452 What are...

40 CFR 63.11452 - What are the performance test requirements for new and existing sources?

Code of Federal Regulations, 2014 CFR

2014-07-01

... production rate for the performance test, kilograms (tons) of glass produced per hour. (v) Calculate the 3... = Average glass production rate for the performance test, kilograms (tons) of glass produced per hour. (v... Glass Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11452 What are...

40 CFR 63.11452 - What are the performance test requirements for new and existing sources?

Code of Federal Regulations, 2010 CFR

2010-07-01

... production rate for the performance test, kilograms (tons) of glass produced per hour. (v) Calculate the 3... = Average glass production rate for the performance test, kilograms (tons) of glass produced per hour. (v... Glass Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11452 What are...

40 CFR 63.11452 - What are the performance test requirements for new and existing sources?

Code of Federal Regulations, 2011 CFR

2011-07-01

... production rate for the performance test, kilograms (tons) of glass produced per hour. (v) Calculate the 3... = Average glass production rate for the performance test, kilograms (tons) of glass produced per hour. (v... Glass Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11452 What are...

Standardizing the Delivery of 20 μL of Hapten During Patch Testing.

PubMed

Selvick, Annika; Stauss, Kari; Strobush, Katrina; Taylor, Lauren; Picard, Alexandra; Doll, Andrea; Reeder, Margo

2016-01-01

The current method for patch test tray assembly requires hand dispensing a small volume of hapten onto chambers. Because of human error, this technique produces inaccurate and inconsistent results. The recommended volume of hapten for patch testing using Finn Chambers is 20 μL. The aims of this study were to create a device that standardizes the delivery of 20 μL and to compare it with the current hand dispensing technique. A device, named the Revolution, was created using the SolidWorks program. Five nurses in our Contact Dermatitis Clinic were asked to load 10 Finn Chambers using the current technique and also using the Revolution. Assembly time, volume of petrolatum, and accuracy of placement were measured. After the 3 trials, the nurses completed a survey on the 2 methods. The amount of petrolatum dispensed using the current technique ranged from 16 to 85 μL, with an average amount of 41.39 μL. The Revolution design dispensed an average of 19.78 μL. The current hand dispensing technique does not allow for accurate and consistent dispensing of 20 μL for patch testing. In contrast, the Revolution is an accurate and consistent device that can help standardize the patch testing method.

Primary and Secondary Education in the United States. OECD Economics Department Working Papers, No. 585

ERIC Educational Resources Information Center

Tulip, Peter; Wurzburg, Gregory

2007-01-01

The average educational attainment of US students is weak by international comparison. For example, mean results of PISA test scores are below the OECD [Organisation for Economic Co-operation and Development] average. This is despite substantial resources devoted to the schooling system. One partial explanation for this is that academic standards,…

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

40 CFR Table 1 to Subpart Eeee of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... determiningcompliance using this method 1. Cadmium 18 micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour...

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

40 CFR Table 1 to Subpart Eeee of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... determiningcompliance using this method 1. Cadmium 18 micrograms per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Method 29 of appendix A of this part. 2. Carbon monoxide 40 parts per million by dry volume 3-run average (1 hour minimum sample time per run during performance test), and 12-hour...

Academic and Nonacademic Characteristics as Predictors of Persistence in an Associate Degree Nursing Program. AIR Forum 1981 Paper.

ERIC Educational Resources Information Center

Donsky, Aaron P.; Judge, Albert J., Jr.

Academic and nonacademic variables that may predict persistence in the nursing program at Lakeland Community College, Ohio, were studied. The academic variables included American College Testing program standard scores, National League for Nursing (NLN) rank scores, high school grade point average, and previous college grade point average. The…

Predicting Energy Consumption for Potential Effective Use in Hybrid Vehicle Powertrain Management Using Driver Prediction

NASA Astrophysics Data System (ADS)

Magnuson, Brian

A proof-of-concept software-in-the-loop study is performed to assess the accuracy of predicted net and charge-gaining energy consumption for potential effective use in optimizing powertrain management of hybrid vehicles. With promising results of improving fuel efficiency of a thermostatic control strategy for a series, plug-ing, hybrid-electric vehicle by 8.24%, the route and speed prediction machine learning algorithms are redesigned and implemented for real- world testing in a stand-alone C++ code-base to ingest map data, learn and predict driver habits, and store driver data for fast startup and shutdown of the controller or computer used to execute the compiled algorithm. Speed prediction is performed using a multi-layer, multi-input, multi- output neural network using feed-forward prediction and gradient descent through back- propagation training. Route prediction utilizes a Hidden Markov Model with a recurrent forward algorithm for prediction and multi-dimensional hash maps to store state and state distribution constraining associations between atomic road segments and end destinations. Predicted energy is calculated using the predicted time-series speed and elevation profile over the predicted route and the road-load equation. Testing of the code-base is performed over a known road network spanning 24x35 blocks on the south hill of Spokane, Washington. A large set of training routes are traversed once to add randomness to the route prediction algorithm, and a subset of the training routes, testing routes, are traversed to assess the accuracy of the net and charge-gaining predicted energy consumption. Each test route is traveled a random number of times with varying speed conditions from traffic and pedestrians to add randomness to speed prediction. Prediction data is stored and analyzed in a post process Matlab script. The aggregated results and analysis of all traversals of all test routes reflect the performance of the Driver Prediction algorithm. The error of average energy gained through charge-gaining events is 31.3% and the error of average net energy consumed is 27.3%. The average delta and average standard deviation of the delta of predicted energy gained through charge-gaining events is 0.639 and 0.601 Wh respectively for individual time-series calculations. Similarly, the average delta and average standard deviation of the delta of the predicted net energy consumed is 0.567 and 0.580 Wh respectively for individual time-series calculations. The average delta and standard deviation of the delta of the predicted speed is 1.60 and 1.15 respectively also for the individual time-series measurements. The percentage of accuracy of route prediction is 91%. Overall, test routes are traversed 151 times for a total test distance of 276.4 km.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orrell, Alice C.; Dixon, Douglas R.

Using the wind data collected at a location in Fort Wainwright’s Donnelly Training Area (DTA) near the Cold Regions Test Center (CRTC) test track, Pacific Northwest National Laboratory (PNNL) estimated the gross and net energy productions that proposed turbine models would have produced exposed to the wind resource measured at the meteorological tower (met tower) location during the year of measurement. Calculations are based on the proposed turbine models’ standard atmospheric conditions power curves, the annual average wind speeds, wind shear estimates, and standard industry assumptions.

The Nature of the Average Difference Between Whites and Blacks on Psychometric Tests: Spearman's Hypothesis.

ERIC Educational Resources Information Center

Jensen, Arthur R.

Charles Spearman originally suggested in 1927 that the varying magnitudes of the mean differences between whites and blacks in standardized scores on a variety of mental tests are directly related to the size of the tests' loadings on g, the general factor common to all complex tests of mental ability. Several independent large-scale studies…

Rubidium frequency standard test program for NAVSTAR GPS

NASA Technical Reports Server (NTRS)

Koide, F.; Dederich, D. J.

1978-01-01

Test data of the RFS Program in the Production phase and computer automation are presented, as an essential element in the evaluation of the RFS performance in a simulated spacecraft environment. Typical production test data will be discussed for stabilities from 1 to 100,000 seconds averaging time and simulated time error accumulation test. Also, design considerations in developing the RFS test systems for the acceptance test in production are discussed.

Fuel Economy and Emissions of a Vehicle Equipped with an Aftermarket Flexible-Fuel Conversion Kit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, John F; Huff, Shean P; West, Brian H

2012-04-01

The U.S. Environmental Protection Agency (EPA) grants Certificates of Conformity for alternative fuel conversion systems and also offers other forms of premarket registration of conversion kits for use in vehicles more than two model years old. Use of alternative fuels such as ethanol, natural gas, and propane are encouraged by the Energy Policy Act of 1992. Several original equipment manufacturers (OEMs) produce emissions-certified vehicles capable of using alternative fuels, and several alternative fuel conversion system manufacturers produce EPA-approved conversion systems for a variety of alternative fuels and vehicle types. To date, only one manufacturer (Flex Fuel U.S.) has received EPAmore » certifications for ethanol fuel (E85) conversion kits. This report details an independent evaluation of a vehicle with a legal installation of a Flex Fuel U.S. conversion kit. A 2006 Dodge Charger was baseline tested with ethanol-free certification gasoline (E0) and E20 (gasoline with 20 vol % ethanol), converted to flex-fuel operation via installation of a Flex Box Smart Kit from Flex Fuel U.S., and retested with E0, E20, E50, and E81. Test cycles included the Federal Test Procedure (FTP or city cycle), the highway fuel economy test (HFET), and the US06 test (aggressive driving test). Averaged test results show that the vehicle was emissions compliant on E0 in the OEM condition (before conversion) and compliant on all test fuels after conversion. Average nitrogen oxide (NOx) emissions exceeded the Tier 2/Bin 5 intermediate life NO{sub X} standard with E20 fuel in the OEM condition due to two of three test results exceeding this standard [note that E20 is not a legal fuel for non-flexible-fuel vehicles (non-FFVs)]. In addition, one E0 test result before conversion and one E20 test result after conversion exceeded the NOX standard, although the average result in these two cases was below the standard. Emissions of ethanol and acetaldehyde increased with increasing ethanol, while nonmethane organic gas and CO emissions remained relatively unchanged for all fuels and cycles. Higher fraction ethanol blends appeared to decrease NO{sub X} emissions on the FTP and HFET (after conversion). As expected, fuel economy (miles per gallon) decreased with increasing ethanol content in all cases.« less

Angular photogrammetric comparison of the soft-tissue facial profile of Kenyans and Chinese.

PubMed

Wamalwa, Peter; Amisi, Stella Kabarika; Wang, Yunji; Chen, Song

2011-05-01

The purpose of this study was to determine the average angular dimensions that define the normal soft-tissue facial profiles of black Kenyans and Chinese and compare them with each other and with values proposed for whites. Standardized facial profile photographs, taken in natural head position, of 177 black Kenyans and 156 Chinese with normal occlusion and well-balanced faces were analyzed for 12 angular parameters. Two-sample t-tests were used to determine sex and racial differences. Kenyan and Chinese averages were compared with proposed white values using 1-sample t-tests. Eight parameters in Kenyans and 7 in Chinese showed sex differences. All angles, except for facial convexity, nasal dorsum, and inferior facial height, were different between Kenyans and Chinese. Kenyan and Chinese averages for all parameters were different from proposed white average, except for facial convexity. Nasolabial and mentolabial angles showed large individual variability and racial differences. The study demonstrated many differences in average angular measurements of the facial profiles of black Kenyans, Chinese, and white standards. Orthodontists, maxillofacial and plastic surgeons, and other clinicians working in the craniofacial region should bear these in mind when setting aesthetic treatment goals for patients of different races. Mean values from this study can be used for comparison with similar records of subjects with same ethnicity.

Avoidance temperament and social-evaluative threat in college students' math performance: a mediation model of math and test anxiety.

PubMed

Liew, Jeffrey; Lench, Heather C; Kao, Grace; Yeh, Yu-Chen; Kwok, Oi-man

2014-01-01

Standardized testing has become a common form of student evaluation with high stakes, and limited research exists on understanding the roles of students' personality traits and social-evaluative threat on their academic performance. This study examined the roles of avoidance temperament (i.e., fear and behavioral inhibition) and evaluative threat (i.e., fear of failure and being viewed as unintelligent) in standardized math test and course grades in college students. Undergraduate students (N=184) from a large public university were assessed on temperamental fear and behavioral inhibition. They were then given 15 minutes to complete a standardized math test. After the test, students provided data on evaluative threat and their math performance (scores on standardized college entrance exam and average grades in college math courses). Results indicate that avoidance temperament was linked to social-evaluative threat and low standardized math test scores. Furthermore, evaluative threat mediated the influence of avoidance temperament on both types of math performance. Results have educational and clinical implications, particularly for students at risk for test anxiety and underperformance. Interventions targeting emotion regulation and stress management skills may help individuals reduce their math and test anxieties.

77 FR 14167 - Approval Tests and Standards for Closed-Circuit Escape Respirators

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... Dioxide 3. Oxygen 4. Peak Breathing Pressures 5. Wet-Bulb Temperature L. Section 84.304 Capacity Test... oxygen storage or chemical carbon dioxide scrubber can be altered by impact or any other effect must... inhaled carbon dioxide, average inhaled oxygen, peak breathing pressures, and wet-bulb temperature...

The Gender Difference: Validity of Standardized Admission Tests in Predicting MBA Performance.

ERIC Educational Resources Information Center

Hancock, Terence

1999-01-01

Of 120 female and 149 male master of business administration (MBA) students, women performed significantly less well on the Graduate Management Admission Test (GMAT). There were no differences in overall MBA grade point average, indicating no strong correlation between the GMAT and MBA performance. (SK)

Detection of severe storm signatures in loblolly pine using seven-year periodic standardized averages and standard deviations

Treesearch

Stevenson Douglas; Thomas Hennessey; Thomas Lynch; Giulia Caterina; Rodolfo Mota; Robert Heineman; Randal Holeman; Dennis Wilson; Keith Anderson

2016-01-01

A loblolly pine plantation near Eagletown, Oklahoma was used to test standardized tree ring widths in detecting snow and ice storms. Widths of two rings immediately following suspected storms were standardized against widths of seven rings following the storm (Stan1 and Stan2). Values of Stan1 less than -0.900 predict a severe (usually ice) storm when Stan 2 is less...

Guide to International Academic Standards for Athletics Eligibility for Students Entering Fall 2007

ERIC Educational Resources Information Center

Mills, Lisa; Nguyen, Binh; Auten, Lisa

2007-01-01

The "NCAA Guide to International Academic Standards for Athletics Eligibility" provides specific criteria to be used as a guide in reviewing the initial eligibility (graduation, core curriculum, grade-point average and ACT/SAT test scores) of students who have completed any portion of their secondary education in a non-United States…

A Procedure for Estimating a Criterion-Referenced Standard to Identify Educationally Deprived Children for Title I Services. Final Report.

ERIC Educational Resources Information Center

Ziomek, Robert L.; Wright, Benjamin D.

Techniques such as the norm-referenced and average score techniques, commonly used in the identification of educationally disadvantaged students, are critiqued. This study applied latent trait theory, specifically the Rasch Model, along with teacher judgments relative to the mastery of instructional/test decisions, to derive a standard setting…

Binocularity and Reading

ERIC Educational Resources Information Center

Brod, Nathan; Hamilton, David

1973-01-01

A sample of 162 fifth grade students were grouped as good, average, and poor readers on the basis of a standardized reading test to determine whether a relationship existed between binocularity and reading performance. (Author/MC)

Fifth International Standard for Gas-Gangrene Antitoxin (Perfringens) (Clostridium welchii Type A Antitoxin)

PubMed Central

Evans, D. G.; Perkins, F. T.

1963-01-01

The Fifth International Standard Gas-Gangrene Antitoxin (Perfringens) (Clostridium welchii Type A Antitoxin) was prepared from serum from immunized horses. It was freeze-dried in ampoules each containing 1 ml. Seven laboratories collaborated in assaying its potency in terms of the Fourth International Standard by the intravenous inoculation of mice. The geometric mean value, taking the results of all the laboratories, was 270 International Units per ampoule and the maximum variation between laboratories was 15%. In vitro (lecithinase) tests were also done by three laboratories, giving an average of 261 International Units per ampoule. The dry weight contents of ampoules, determined in three laboratories, varied by less than 3%, with an average of 90.35 mg per ampoule. The standard was stable for 120 hours at 56°C. Each ampoule of the Fifth International Standard for Gas-Gangrene Antitoxin (Perfringens) contains 270 International Units, and one International Unit is contained in 0.3346 mg of the International Standard. PMID:14107745

Assessing the clinical effectiveness of an algorithmic approach for mucosal lichen planus (MLP): A retrospective review.

PubMed

Ashack, Kurt A; Haley, Laura L; Luther, Chelsea A; Riemer, Christie A; Ashack, Richard J

2016-06-01

Mucosal lichen planus (MLP) is a therapeutic challenge in need of a new treatment approach because of its debilitating effect on patient's quality of life. We sought to evaluate a standardized treatment plan for patients with MLP. A second objective was to describe the effect of mycophenolate mofetil in this patient population. The study retrospectively analyzed 53 patients with MLP treated using a standardized algorithm. The number of MLP lesions, disease activity, and pain at the last visit were compared with baseline scores determined at the initial visit. Results were analyzed using the paired samples t test and confirmed with the Wilcoxon matched pairs signed rank test. The average number of lesions was reduced from 3.77 to 1.67 (P < .001). The average disease activity was reduced from 2.73 to 0.90 (P < .001). Average pain reported decreased from 2.03 to 1.03 (P < .001). This study was a retrospective analysis of a small patient population. There was no universal symptom severity scale used at the time of treatment for some patients. The standardized treatment plan reduced symptoms for patients with MLP. Mycophenolate mofetil appears to be a reasonable treatment option for these patients. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Universality, correlations, and rankings in the Brazilian universities national admission examinations

NASA Astrophysics Data System (ADS)

da Silva, Roberto; Lamb, Luis C.; Barbosa, Marcia C.

2016-09-01

We analyze the scores obtained by students who have taken the ENEM examination, The Brazilian High School National Examination which is used in the admission process at Brazilian universities. The average high schools scores from different disciplines are compared through the Pearson correlation coefficient. The results show a very large correlation between the performance in the different school subjects. Even though the students' scores in the ENEM form a Gaussian due to the standardization, we show that the high schools' scores form a bimodal distribution that cannot be used to evaluate and compare students performance over time. We also show that this high schools distribution reflects the correlation between school performance and the economic level (based on the average family income) of the students. The ENEM scores are compared with a Brazilian non standardized exam, the entrance examination from the Universidade Federal do Rio Grande do Sul. The analysis of the performance of the same individuals in both tests shows that the two tests not only select different abilities, but also lead to the admission of different sets of individuals. Our results indicate that standardized tests might be an interesting tool to compare performance of individuals over the years, but not of institutions.

40 CFR Appendix K to Part 75 - Quality Assurance and Operating Procedures for Sorbent Trap Monitoring Systems

Code of Federal Regulations, 2010 CFR

2010-07-01

... until the leak check is passed. Post-test leak check ≤4% of average sampling rate After sampling ** See... the test site. The sorbent media must be obtained from a source that can demonstrate the quality...-traceable calibration gas standards and reagents shall be used for the tests and procedures required under...

Simultaneous validation of the SunTech CT40 automated blood pressure measurement device by the 1993 British Hypertension Society protocol and the Association for the Advancement of Medical Instrumentation/International Organization for Standardization 81060-2: 2013 standard.

PubMed

Polo Friz, Hernan; Punzi, Veronica; Petri, Francesco; Orlandi, Riccardo; Maggiolini, Daniele; Polo Friz, Melisa; Primitz, Laura; Vighi, Giuseppe

2017-10-01

This study aimed to perform a simultaneous, third-party, independent validation of the oscillometric SunTech CT40 device for blood pressure (BP) measurement, according to the 1993 protocol of the British Hypertension Society and the standard of the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) 81060-2:2013. Patient recruitment, study procedures, and data analysis followed the recommendations stated by the protocols. The study was approved by the institutional review board. A total of 94 participants were included, 52 (55.3%) women, mean±SD age: 63.1±18.0 years, mean±SD arm circumference: 35.0±9.0 cm. The average of observers' entry BPs was 146.9±37.2 mmHg for systolic blood pressure (SBP) and 82.2±22.1 mmHg for diastolic blood pressure (DBP). Differences between the standard measurement and the test device within 5, 10, and 15 mmHg, for the better observer, were 79.4, 96.5, and 100.0% for SBP and 82.6, 97.5, and 100.0% for DBP, respectively. The mean±SD differences between the readings obtained using the test device and those obtained by the observers (AAMI/ISO 81060-2:2013 standard criterion 1) were 0.3±5.0 mmHg (SBP) and -0.8±4.3 mmHg (DBP), and the mean±SD differences between average of reference readings and average of test device readings in each patient (criterion 2) were 0.3±3.9 and -0.8±3.5 mmHg for SBP and DBP, respectively. The CT40 BP device achieved A/A grade of the British Hypertension Society protocol and fulfilled the requirements (criteria 1 and 2) of the AAMI/ISO standard. CT40 can be recommended for BP measurement in adults.

Flexner 3.0-Democratization of Medical Knowledge for the 21st Century: Teaching Medical Science Using K-12 General Pathology as a Gateway Course.

PubMed

Weinstein, Ronald S; Krupinski, Elizabeth A; Weinstein, John B; Graham, Anna R; Barker, Gail P; Erps, Kristine A; Holtrust, Angelette L; Holcomb, Michael J

2016-01-01

A medical school general pathology course has been reformatted into a K-12 general pathology course. This new course has been implemented at a series of 7 to 12 grade levels and the student outcomes compared. Typically, topics covered mirrored those in a medical school general pathology course serving as an introduction to the mechanisms of diseases. Assessment of student performance was based on their score on a multiple-choice final examination modeled after an examination given to medical students. Two Tucson area schools, in a charter school network, participated in the study. Statistical analysis of examination performances showed that there were no significant differences as a function of school ( F = 0.258, P = .6128), with students at school A having an average test scores of 87.03 (standard deviation = 8.99) and school B 86.00 (standard deviation = 8.18; F = 0.258, P = .6128). Analysis of variance was also conducted on the test scores as a function of gender and class grade. There were no significant differences as a function of gender ( F = 0.608, P = .4382), with females having an average score of 87.18 (standard deviation = 7.24) and males 85.61 (standard deviation = 9.85). There were also no significant differences as a function of grade level ( F = 0.627, P = .6003), with 7th graders having an average of 85.10 (standard deviation = 8.90), 8th graders 86.00 (standard deviation = 9.95), 9th graders 89.67 (standard deviation = 5.52), and 12th graders 86.90 (standard deviation = 7.52). The results demonstrated that middle and upper school students performed equally well in K-12 general pathology. Student course evaluations showed that the course met the student's expectations. One class voted K-12 general pathology their "elective course-of-the-year."

Flexner 3.0—Democratization of Medical Knowledge for the 21st Century

PubMed Central

Krupinski, Elizabeth A.; Weinstein, John B.; Graham, Anna R.; Barker, Gail P.; Erps, Kristine A.; Holtrust, Angelette L.; Holcomb, Michael J.

2016-01-01

A medical school general pathology course has been reformatted into a K-12 general pathology course. This new course has been implemented at a series of 7 to 12 grade levels and the student outcomes compared. Typically, topics covered mirrored those in a medical school general pathology course serving as an introduction to the mechanisms of diseases. Assessment of student performance was based on their score on a multiple-choice final examination modeled after an examination given to medical students. Two Tucson area schools, in a charter school network, participated in the study. Statistical analysis of examination performances showed that there were no significant differences as a function of school (F = 0.258, P = .6128), with students at school A having an average test scores of 87.03 (standard deviation = 8.99) and school B 86.00 (standard deviation = 8.18; F = 0.258, P = .6128). Analysis of variance was also conducted on the test scores as a function of gender and class grade. There were no significant differences as a function of gender (F = 0.608, P = .4382), with females having an average score of 87.18 (standard deviation = 7.24) and males 85.61 (standard deviation = 9.85). There were also no significant differences as a function of grade level (F = 0.627, P = .6003), with 7th graders having an average of 85.10 (standard deviation = 8.90), 8th graders 86.00 (standard deviation = 9.95), 9th graders 89.67 (standard deviation = 5.52), and 12th graders 86.90 (standard deviation = 7.52). The results demonstrated that middle and upper school students performed equally well in K-12 general pathology. Student course evaluations showed that the course met the student’s expectations. One class voted K-12 general pathology their “elective course-of-the-year.” PMID:28725762

Characteristics of Minority Students Who Excel on the SAT and in the Classroom. Policy Information Report

ERIC Educational Resources Information Center

Bridgeman, Brent; Wendler, Cathy

2004-01-01

After a few decades of keeping a watchful eye, substantial gaps in the average standardized test scores of White and some minority group students persist. The average group differences on the SAT are among the most visible examples of this pattern, but when we focus only on mean score differences among students, we tend to overlook the relatively…

Evaluation of a new ballistic vest design for compliance with Standard No. PN-V-87000:2011 using physiological tests.

PubMed

Marszałek, Anna; Grabowska, Grażyna; Łężak, Krzysztof

2018-05-09

Research into newly developed ballistic vests to be worn by police officers under clothing was carried out with air temperature conditions of +20 °C. A ballistic vest should incorporate protective features, comfort and ergonomics. The thermal strain on users who wore the vests was evaluated as an average and individually, after they had been conditioned in high (+50 °C), low (-40 °C) or neutral (+20 °C) air temperatures, while performing various occupational activities. Research involved six police officers aged 36-42 years, who wore civilian clothing used in moderate environmental conditions. During the tests, physiological parameters (internal temperature, local skin temperatures and amount of sweat secreted) were determined. The ease of doing exercises while wearing the vests, vest service and level of discomfort in use were assessed. Research showed that the vests tested, both as an average and individually, meet the requirements of Standard No. PN-V-87000:2011 (clause 4.5).

Initial Evaluation tests of 20.0 amphere-hour sealed nickel-cadmium cells manufactured for NASA's standard cell program

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1979-01-01

Evaluation tests of 116 nickel cadmium cells provided by four manufacturers are described. Each manufacturer's group of cells, on the average, indicated an increase in plate stack thickness following the test. No limits or requirements were exceeded by any of the cells manufactured by General Electric. Limits/requirements exceeded during the charge portion of the testing are given.

40 CFR 1042.515 - Test procedures related to not-to-exceed standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (g) For engines equipped with emission controls that include discrete regeneration events, if a regeneration event occurs during the NTE test, the averaging period must be at least as long as the time between the events multiplied by the number of full regeneration events within the sampling period. This...

40 CFR 1042.515 - Test procedures related to not-to-exceed standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (g) For engines equipped with emission controls that include discrete regeneration events, if a regeneration event occurs during the NTE test, the averaging period must be at least as long as the time between the events multiplied by the number of full regeneration events within the sampling period. This...

40 CFR 1042.515 - Test procedures related to not-to-exceed standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (g) For engines equipped with emission controls that include discrete regeneration events, if a regeneration event occurs during the NTE test, the averaging period must be at least as long as the time between the events multiplied by the number of full regeneration events within the sampling period. This...

40 CFR 1042.515 - Test procedures related to not-to-exceed standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (g) For engines equipped with emission controls that include discrete regeneration events, if a regeneration event occurs during the NTE test, the averaging period must be at least as long as the time between the events multiplied by the number of full regeneration events within the sampling period. This...

Relationship of Self Esteem of the Disadvantaged to School Success.

ERIC Educational Resources Information Center

Frerichs, Allen H.

This study shows that there is a positive correlation between self esteem and academic achievement for inner city black children. Seventy-eight grade 6 black students were divided into the following categories: upper one-third and lower third based on intelligence test scores, standardized reading test scores, and grade point average (GPA) from…

Increasing Student Learning in Mathematics with the Use of Collaborative Teaching Strategies

ERIC Educational Resources Information Center

Di Fatta, Jenna; Garcia, Sarah; Gorman, Stephanie

2009-01-01

Three teacher researchers conducted this action research project to increase their 54 high school students' achievements in mathematics. The teacher researchers had noticed a trend of low scores on teacher-made chapter tests and non-completion of daily homework. Standardized tests showed that most students scored below average on the mathematics…

Retinoblastoma and Superior Verbal IQ Scores?

ERIC Educational Resources Information Center

Tobin, Michael; Hill, Eileen; Hill, John

2010-01-01

Experienced teachers have long asserted that children blind from retinoblastoma (Rb), a rare cancer of the eye, are of above average intelligence. To test this hypothesis, standardized verbal intelligence tests were administered to a sample of 85 children and adults, all diagnosed with the early infancy form of this condition. For 42 of the Rb…

The Role of Social-Emotional and Social Network Factors in the Relationship Between Academic Achievement and Risky Behaviors.

PubMed

Wong, Mitchell D; Strom, Danielle; Guerrero, Lourdes R; Chung, Paul J; Lopez, Desiree; Arellano, Katherine; Dudovitz, Rebecca N

2017-08-01

We examined whether standardized test scores and grades are related to risky behaviors among low-income minority adolescents and whether social networks and social-emotional factors explained those relationships. We analyzed data from 929 high school students exposed by natural experiment to high- or low-performing academic environments in Los Angeles. We collected information on grade point average (GPA), substance use, sexual behaviors, participation in fights, and carrying a weapon from face-to-face interviews and obtained California math and English standardized test results. Logistic regression and mediation analyses were used to examine the relationship between achievement and risky behaviors. Better GPA and California standardized test scores were strongly associated with lower rates of substance use, high-risk sexual behaviors, and fighting. The unadjusted relative odds of monthly binge drinking was 0.72 (95% confidence interval, 0.56-0.93) for 1 SD increase in standardized test scores and 0.46 (95% confidence interval, 0.29-0.74) for GPA of B- or higher compared with C+ or lower. Most associations disappeared after controlling for social-emotional and social network factors. Averaged across the risky behaviors, mediation analysis revealed social-emotional factors accounted for 33% of the relationship between test scores and risky behaviors and 43% of the relationship between GPA with risky behaviors. Social network characteristics accounted for 31% and 38% of the relationship between behaviors with test scores and GPA, respectively. Demographic factors, parenting, and school characteristics were less important explanatory factors. Social-emotional factors and social network characteristics were the strongest explanatory factors of the achievement-risky behavior relationship and might be important to understanding the relationship between academic achievement and risky behaviors. Published by Elsevier Inc.

Intelligent Soft Computing on Forex: Exchange Rates Forecasting with Hybrid Radial Basis Neural Network

PubMed Central

Marcek, Dusan; Durisova, Maria

2016-01-01

This paper deals with application of quantitative soft computing prediction models into financial area as reliable and accurate prediction models can be very helpful in management decision-making process. The authors suggest a new hybrid neural network which is a combination of the standard RBF neural network, a genetic algorithm, and a moving average. The moving average is supposed to enhance the outputs of the network using the error part of the original neural network. Authors test the suggested model on high-frequency time series data of USD/CAD and examine the ability to forecast exchange rate values for the horizon of one day. To determine the forecasting efficiency, they perform a comparative statistical out-of-sample analysis of the tested model with autoregressive models and the standard neural network. They also incorporate genetic algorithm as an optimizing technique for adapting parameters of ANN which is then compared with standard backpropagation and backpropagation combined with K-means clustering algorithm. Finally, the authors find out that their suggested hybrid neural network is able to produce more accurate forecasts than the standard models and can be helpful in eliminating the risk of making the bad decision in decision-making process. PMID:26977450

Intelligent Soft Computing on Forex: Exchange Rates Forecasting with Hybrid Radial Basis Neural Network.

PubMed

Falat, Lukas; Marcek, Dusan; Durisova, Maria

2016-01-01

This paper deals with application of quantitative soft computing prediction models into financial area as reliable and accurate prediction models can be very helpful in management decision-making process. The authors suggest a new hybrid neural network which is a combination of the standard RBF neural network, a genetic algorithm, and a moving average. The moving average is supposed to enhance the outputs of the network using the error part of the original neural network. Authors test the suggested model on high-frequency time series data of USD/CAD and examine the ability to forecast exchange rate values for the horizon of one day. To determine the forecasting efficiency, they perform a comparative statistical out-of-sample analysis of the tested model with autoregressive models and the standard neural network. They also incorporate genetic algorithm as an optimizing technique for adapting parameters of ANN which is then compared with standard backpropagation and backpropagation combined with K-means clustering algorithm. Finally, the authors find out that their suggested hybrid neural network is able to produce more accurate forecasts than the standard models and can be helpful in eliminating the risk of making the bad decision in decision-making process.

International Intercomparison of Specific Absorption Rates in a Flat Absorbing Phantom in the Near-Field of Dipole Antennas

PubMed Central

Davis, Christopher C.; Beard, Brian B.; Tillman, Ahlia; Rzasa, John; Merideth, Eric; Balzano, Quirino

2018-01-01

This paper reports the results of an international intercomparison of the specific absorption rates (SARs) measured in a flat-bottomed container (flat phantom), filled with human head tissue simulant fluid, placed in the near-field of custom-built dipole antennas operating at 900 and 1800 MHz, respectively. These tests of the reliability of experimental SAR measurements have been conducted as part of a verification of the ways in which wireless phones are tested and certified for compliance with safety standards. The measurements are made using small electric-field probes scanned in the simulant fluid in the phantom to record the spatial SAR distribution. The intercomparison involved a standard flat phantom, antennas, power meters, and RF components being circulated among 15 different governmental and industrial laboratories. At the conclusion of each laboratory’s measurements, the following results were communicated to the coordinators: Spatial SAR scans at 900 and 1800 MHz and 1 and 10 g maximum spatial SAR averages for cubic volumes at 900 and 1800 MHz. The overall results, given as meanstandard deviation, are the following: at 900 MHz, 1 g average 7.850.76; 10 g average 5.160.45; at 1800 MHz, 1 g average 18.44 ± 1.65; 10 g average 10.14 ± 0.85, all measured in units of watt per kilogram, per watt of radiated power. PMID:29520117

The Astronomy Diagnostic Test: Comparing Your Class to Others

NASA Astrophysics Data System (ADS)

Hufnagel, B.; Deming, G.

1999-05-01

A standard diagnostic test can be a powerful tool to assess the conceptual understanding of students, as has been proven for undergraduate physics instruction over the last ten years (e.g., E.F. Redish and R.N. Steinberg 1999, Physics Today, 52:1, 24). If you are now using, or are considering adopting, a more interactive teaching style such as that used by Eric Mazur (Peer Instruction: a User's Manual, [Prentice-Hall: 1997]) or Michael Zeilik and his collaborators (1997, AJP, 65:12, 987), you may want to use a standard diagnostic test designed for undergraduate astronomy classes. Details of the validation of the ADT are at Slater et al., also presented in this session. A comparative database of ADT scores, by class and by question, can help the instructor assess student preparedness and the effectiveness of alternative teaching methods. In the spring of 1999, 19 astronomy instructors at 7 state universities, 4 community colleges, 4 liberal arts schools, 1 woman's college and 1 technical university across the USA gave the ADT to their classes once at the beginning of the course, and again at the end of the course. The average pre-course ADT scores by class from these ~ 1000 students show two surprising results: the conceptual understanding of introductory classes is about the same (34%) regardless of type of school, geographic location, or average student age. However, there is a significant gender difference, with females scoring an average of 29% and males 39%, with the standard errors both less than 1%. The Astronomy Diagnostic Test (ADT) and its comparative by-class database will be available at the National Institute for Science Education (NISE) website after 1 June 1999. This research was supported by the National Science Foundation through Grant DGE-9714489, and by the generosity of the participating astronomy instructors.

The use of an essay examination in evaluating medical students during the surgical clerkship.

PubMed

Smart, Blair J; Rinewalt, Daniel; Daly, Shaun C; Janssen, Imke; Luu, Minh B; Myers, Jonathan A

2016-01-01

Third-year medical students are graded according to subjective performance evaluations and standardized tests written by the National Board of Medical Examiners (NBME). Many "poor" standardized test takers believe the heavily weighted NBME does not evaluate their true fund of knowledge and would prefer a more open-ended forum to display their individualized learning experiences. Our study examined the use of an essay examination as part of the surgical clerkship evaluation. We retrospectively examined the final surgical clerkship grades of 781 consecutive medical students enrolled in a large urban academic medical center from 2005 to 2011. We examined final grades with and without the inclusion of the essay examination for all students using a paired t test and then sought any relationship between the essay and NBME using Pearson correlations. Final average with and without the essay examination was 72.2% vs 71.3% (P < .001), with the essay examination increasing average scores by .4, 1.8, and 2.5 for those receiving high pass, pass, and fail, respectively. The essay decreased the average score for those earning an honors by .4. Essay scores were found to overall positively correlate with the NBME (r = .32, P < .001). The inclusion of an essay examination as part of the third-year surgical core clerkship final did increase the final grade a modest degree, especially for those with lower scores who may identify themselves as "poor" standardized test takers. A more open-ended forum may allow these students an opportunity to overcome this deficiency and reveal their true fund of surgical knowledge. Copyright © 2016 Elsevier Inc. All rights reserved.

[Development of ophthalmologic software for handheld devices].

PubMed

Grottone, Gustavo Teixeira; Pisa, Ivan Torres; Grottone, João Carlos; Debs, Fernando; Schor, Paulo

2006-01-01

The formulas for calculation of intraocular lenses have evolved since the first theoretical formulas by Fyodorov. Among the second generation formulas, the SRK-I formula has a simple calculation, taking into account a calculation that only involved anteroposterior length, IOL constant and average keratometry. With the evolution of those formulas, complexicity increased making the reconfiguration of parameters in special situations impracticable. In this way the production and development of software for such a purpose, can help surgeons to recalculate those values if needed. To idealize, develop and test a Brazilian software for calculation of IOL dioptric power for handheld computers. For the development and programming of software for calculation of IOL, we used PocketC program (OrbWorks Concentrated Software, USA). We compared the results collected from a gold-standard device (Ultrascan/Alcon Labs) with the simulation of 100 fictitious patients, using the same IOL parameters. The results were grouped for ULTRASCAN data and SOFTWARE data. Using SRK/T formula the range of those parameters included a keratometry varying between 35 and 55D, axial length between 20 and 28 mm, IOL constants of 118.7, 118.3 and 115.8. Using Wilcoxon test, it was shown that the groups do not differ (p=0.314). We had a variation in the Ultrascan sample between 11.82 and 27.97. In the tested program sample the variation was practically similar (11.83-27.98). The average of the Ultrascan group was 20.93. The software group had a similar average. The standard deviation of the samples was also similar (4.53). The precision of IOL software for handheld devices was similar to that of the standard devices using the SRK/T formula. The software worked properly, was steady without bugs in tested models of operational system.

An Occupational Performance Test Validation Program for Fire Fighters at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Schonfeld, Brian R.; Doerr, Donald F.; Convertino, Victor A.

1990-01-01

We evaluated performance of a modified Combat Task Test (CTT) and of standard fitness tests in 20 male subjects to assess the prediction of occupational performance standards for Kennedy Space Center fire fighters. The CTT consisted of stair-climbing, a chopping simulation, and a victim rescue simulation. Average CTT performance time was 3.61 +/- 0.25 min (SEM) and all CTT tasks required 93% to 97% maximal heart rate. By using scores from the standard fitness tests, a multiple linear regression model was fitted to each parameter: the stairclimb (r(exp 2) = .905, P less than .05), the chopping performance time (r(exp 2) = .582, P less than .05), the victim rescue time (r(exp 2) = .218, P = not significant), and the total performance time (r(exp 2) = .769, P less than .05). Treadmill time was the predominant variable, being the major predictor in two of four models. These results indicated that standardized fitness tests can predict performance on some CTT tasks and that test predictors were amenable to exercise training.

End-of-Course Multiple-Choice Test Results, 2008-09. Measuring Up. E&R Report No. 10.04

ERIC Educational Resources Information Center

McMillen, Brad

2010-01-01

End-of-Course (EOC) tests are given statewide in 10 courses typically taken in high school. Results for 2008-09 (and prior years, where available) are reported in terms of both average scale scores and the percentage of students scoring proficient. After the recent introduction of new EOC tests with higher standards, scores in WCPSS have begun to…

Proposal and evaluation of subordinate standard solar irradiance spectra for applications in solar energy systems

DOE PAGES

Jessen, Wilko; Wilbert, Stefan; Gueymard, Christian A.; ...

2018-04-10

Reference solar irradiance spectra are needed to specify key parameters of solar technologies such as photovoltaic cell efficiency, in a comparable way. The IEC 60904-3 and ASTM G173 standards present such spectra for Direct Normal Irradiance (DNI) and Global Tilted Irradiance (GTI) on a 37 degrees tilted sun-facing surface for one set of clear-sky conditions with an air mass of 1.5 and low aerosol content. The IEC/G173 standard spectra are the widely accepted references for these purposes. Hence, the authors support the future replacement of the outdated ISO 9845 spectra with the IEC spectra within the ongoing update of thismore » ISO standard. The use of a single reference spectrum per component of irradiance is important for clarity when comparing and rating solar devices such as PV cells. However, at some locations the average spectra can differ strongly from those defined in the IEC/G173 standards due to widely different atmospheric conditions and collector tilt angles. Therefore, additional subordinate standard spectra for other atmospheric conditions and tilt angles are of interest for a rough comparison of product performance under representative field conditions, in addition to using the main standard spectrum for product certification under standard test conditions. This simplifies the product selection for solar power systems when a fully-detailed performance analysis is not feasible (e.g. small installations). Also, the effort for a detailed yield analyses can be reduced by decreasing the number of initial product options. After appropriate testing, this contribution suggests a number of additional spectra related to eight sets of atmospheric conditions and tilt angles that are currently considered within ASTM and ISO working groups. The additional spectra, called subordinate standard spectra, are motivated by significant spectral mismatches compared to the IEC/G173 spectra (up to 6.5%, for PV at 37 degrees tilt and 10-15% for CPV). These mismatches correspond to potential accuracy improvements for a quick estimation of the average efficiency by applying the appropriate subordinate standard spectrum instead of the IEC/G173 spectra. The applicability of these spectra for PV performance analyses is confirmed at five test sites, for which subordinate spectra could be intuitively selected based on the average atmospheric aerosol optical depth (AOD) and precipitable water vapor at those locations. The development of subordinate standard spectra for DNI and concentrating solar power (CSP) and concentrating PV (CPV) is also considered. However, it is found that many more sets of atmospheric conditions would be required to allow the intuitive selection of DNI spectra for the five test sites, due in particular to the stronger effect of AOD on DNI compared to GTI. The matrix of subordinate GTI spectra described in this paper are recommended to appear as an option in the annex of future standards, in addition to the obligatory use of the main spectrum from the ASTM G173 and IEC 60904 standards.« less

Proposal and evaluation of subordinate standard solar irradiance spectra for applications in solar energy systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jessen, Wilko; Wilbert, Stefan; Gueymard, Christian A.

Reference solar irradiance spectra are needed to specify key parameters of solar technologies such as photovoltaic cell efficiency, in a comparable way. The IEC 60904-3 and ASTM G173 standards present such spectra for Direct Normal Irradiance (DNI) and Global Tilted Irradiance (GTI) on a 37 degrees tilted sun-facing surface for one set of clear-sky conditions with an air mass of 1.5 and low aerosol content. The IEC/G173 standard spectra are the widely accepted references for these purposes. Hence, the authors support the future replacement of the outdated ISO 9845 spectra with the IEC spectra within the ongoing update of thismore » ISO standard. The use of a single reference spectrum per component of irradiance is important for clarity when comparing and rating solar devices such as PV cells. However, at some locations the average spectra can differ strongly from those defined in the IEC/G173 standards due to widely different atmospheric conditions and collector tilt angles. Therefore, additional subordinate standard spectra for other atmospheric conditions and tilt angles are of interest for a rough comparison of product performance under representative field conditions, in addition to using the main standard spectrum for product certification under standard test conditions. This simplifies the product selection for solar power systems when a fully-detailed performance analysis is not feasible (e.g. small installations). Also, the effort for a detailed yield analyses can be reduced by decreasing the number of initial product options. After appropriate testing, this contribution suggests a number of additional spectra related to eight sets of atmospheric conditions and tilt angles that are currently considered within ASTM and ISO working groups. The additional spectra, called subordinate standard spectra, are motivated by significant spectral mismatches compared to the IEC/G173 spectra (up to 6.5%, for PV at 37 degrees tilt and 10-15% for CPV). These mismatches correspond to potential accuracy improvements for a quick estimation of the average efficiency by applying the appropriate subordinate standard spectrum instead of the IEC/G173 spectra. The applicability of these spectra for PV performance analyses is confirmed at five test sites, for which subordinate spectra could be intuitively selected based on the average atmospheric aerosol optical depth (AOD) and precipitable water vapor at those locations. The development of subordinate standard spectra for DNI and concentrating solar power (CSP) and concentrating PV (CPV) is also considered. However, it is found that many more sets of atmospheric conditions would be required to allow the intuitive selection of DNI spectra for the five test sites, due in particular to the stronger effect of AOD on DNI compared to GTI. The matrix of subordinate GTI spectra described in this paper are recommended to appear as an option in the annex of future standards, in addition to the obligatory use of the main spectrum from the ASTM G173 and IEC 60904 standards.« less

Statistical evaluation of an inductively coupled plasma atomic emission spectrometric method for routine water quality testing

USGS Publications Warehouse

Garbarino, J.R.; Jones, B.E.; Stein, G.P.

1985-01-01

In an interlaboratory test, inductively coupled plasma atomic emission spectrometry (ICP-AES) was compared with flame atomic absorption spectrometry and molecular absorption spectrophotometry for the determination of 17 major and trace elements in 100 filtered natural water samples. No unacceptable biases were detected. The analysis precision of ICP-AES was found to be equal to or better than alternative methods. Known-addition recovery experiments demonstrated that the ICP-AES determinations are accurate to between plus or minus 2 and plus or minus 10 percent; four-fifths of the tests yielded average recoveries of 95-105 percent, with an average relative standard deviation of about 5 percent.

Students' Struggle with First-Year University Mathematics Courses in Saudi Arabia

ERIC Educational Resources Information Center

Khoshaim, Heba Bakr; Ali, Tasneem

2015-01-01

Universities and colleges at the Kingdom of Saudi Arabia assess new applicants using academic indicators, such as high school grade point average (HSGPA) and the score of a national standardized test (the General Aptitude Test), to ensure that they are academically fit to join the institution. Such criteria have been suggested in previous research…

Inductively coupled plasma-mass spectrometric method for the determination of dissolved trace elements in natural water

USGS Publications Warehouse

Garbarino, J.R.; Taylor, Howard E.

1996-01-01

An inductively coupled plasma-mass spectrometry method was developed for the determination of dissolved Al, As, B, Ba, Be, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sr, Tl, U, V, and Zn in natural waters. Detection limits are generally in the 50-100 picogram per milliliter (pg/mL) range, with the exception of As which is in the 1 microgram per liter (ug/L) range. Interferences associated with spectral overlap from concomitant isotopes or molecular ions and sample matrix composition have been identified. Procedures for interference correction and reduction related to isotope selection, instrumental operating conditions, and mathematical data processing techniques are described. Internal standards are used to minimize instrumental drift. The average analytical precision attainable for 5 times the detection limit is about 16 percent. The accuracy of the method was tested using a series of U.S. Geological Survey Standard Reference Water Standards (SWRS), National Research Council Canada Riverine Water Standard, and National Institute of Standards and Technology (NIST) Trace Elements in Water Standards. Average accuracies range from 90 to 110 percent of the published mean values.

Neurocognitive screening of lead-exposed andean adolescents and young adults.

PubMed

Counter, S Allen; Buchanan, Leo H; Ortega, Fernando

2009-01-01

This study was designed to assess the utility of two psychometric tests with putative minimal cultural bias for use in field screening of lead (Pb)-exposed Ecuadorian Andean workers. Specifically, the study evaluated the effectiveness in Pb-exposed adolescents and young adults of a nonverbal reasoning test standardized for younger children, and compared the findings with performance on a test of auditory memory. The Raven Coloured Progressive Matrices (RCPM) was used as a test of nonverbal intelligence, and the Digit Span subtest of the Wechsler IV intelligence scale was used to assess auditory memory/attention. The participants were 35 chronically Pb-exposed Pb-glazing workers, aged 12-21 yr. Blood lead (PbB) levels for the study group ranged from 3 to 86 microg/dl, with 65.7% of the group at and above 10 microg/dl. Zinc protoporphyrin heme ratios (ZPP/heme) ranged from 38 to 380 micromol/mol, with 57.1% of the participants showing abnormal ZPP/heme (>69 micromol/mol). ZPP/heme was significantly correlated with PbB levels, suggesting chronic Pb exposure. Performance on the RCPM was less than average on the U.S., British, and Puerto Rican norms, but average on the Peruvian norms. Significant inverse associations between PbB/ZPP concentrations and RCPM standard scores using the U.S., Puerto Rican, and Peruvian norms were observed, indicating decreasing RCPM test performance with increasing PbB and ZPP levels. RCPM scores were significantly correlated with performance on the Digit Span test for auditory memory. Mean Digit Span scale score was less than average, suggesting auditory memory/attention deficits. In conclusion, both the RCPM and Digit Span tests were found to be effective instruments for field screening of visual-spatial reasoning and auditory memory abilities, respectively, in Pb-exposed Andean adolescents and young adults.

Reliability and Validity of Ten Consumer Activity Trackers Depend on Walking Speed.

PubMed

Fokkema, Tryntsje; Kooiman, Thea J M; Krijnen, Wim P; VAN DER Schans, Cees P; DE Groot, Martijn

2017-04-01

To examine the test-retest reliability and validity of ten activity trackers for step counting at three different walking speeds. Thirty-one healthy participants walked twice on a treadmill for 30 min while wearing 10 activity trackers (Polar Loop, Garmin Vivosmart, Fitbit Charge HR, Apple Watch Sport, Pebble Smartwatch, Samsung Gear S, Misfit Flash, Jawbone Up Move, Flyfit, and Moves). Participants walked three walking speeds for 10 min each; slow (3.2 km·h), average (4.8 km·h), and vigorous (6.4 km·h). To measure test-retest reliability, intraclass correlations (ICC) were determined between the first and second treadmill test. Validity was determined by comparing the trackers with the gold standard (hand counting), using mean differences, mean absolute percentage errors, and ICC. Statistical differences were calculated by paired-sample t tests, Wilcoxon signed-rank tests, and by constructing Bland-Altman plots. Test-retest reliability varied with ICC ranging from -0.02 to 0.97. Validity varied between trackers and different walking speeds with mean differences between the gold standard and activity trackers ranging from 0.0 to 26.4%. Most trackers showed relatively low ICC and broad limits of agreement of the Bland-Altman plots at the different speeds. For the slow walking speed, the Garmin Vivosmart and Fitbit Charge HR showed the most accurate results. The Garmin Vivosmart and Apple Watch Sport demonstrated the best accuracy at an average walking speed. For vigorous walking, the Apple Watch Sport, Pebble Smartwatch, and Samsung Gear S exhibited the most accurate results. Test-retest reliability and validity of activity trackers depends on walking speed. In general, consumer activity trackers perform better at an average and vigorous walking speed than at a slower walking speed.

The relationship between standards-based reporting systems and third-grade mathematics and science achievement

NASA Astrophysics Data System (ADS)

Prejean-Harris, Rose M.

Over the last decade, accountability has been the driving force for many changes in education in the United States. One major educational reform effort is the standards-based movement with a focus of combining a number of processes that involve aligning curriculum, instruction, assessment and feedback to specific standards that are measureable and indicative of student achievement. The purpose of this study is to determine if the type of report card is a possible predictor of third grade student achievement on standardized tests in mathematics and science for the 2012 Criterion-Referenced Competency Test (CRCT). The results of this study concluded that the difference in test scores in mathematics and science for students in the traditional report card group was not statistically significant when compared to the scores of students in the standards-based report card group when controlling for poverty level, school locale, and school district. However, students in the traditional report card group scored an average of 1.01 point higher in mathematics and 2.27 points higher in science than students in the standards-based report card group.

Demonstration & Testing of ClimaStat for Improved DX Air-Conditioning Efficiency

DTIC Science & Technology

2013-04-01

impaired productivity and increased transmission of viruses and bacteria. Allowing indoor RH to rise above an average of 60%rh or a peak of 70%rh can...testing of an engineering prototype culminated in issuance of US Patent 6,427,454 in 2002. Then, development, testing and refinement of a production ...field tests on four Trane (American Standard) systems at a university site were concluded in 2009. A production prototype was constructed based on

A Comprehensive Analysis of the Efficacy of Non-Cognitive Measures: Predicting Academic Success in a Historically Black University in South Texas

ERIC Educational Resources Information Center

Lanham, B. Dean; Schauer, Edward J.; Osho, G. Solomon

2011-01-01

Universities have long used standardized American College Tests (ACT), Scholastic Aptitude Tests (SAT), and high school Grade Point Averages (HS GPA) for academic admission requirements. The current study of 127 minority college students in a Historically Black University in South Texas assesses an alternative measure, the Non-Cognitive…

40 CFR 86.094-28 - Compliance with emission standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the outlier procedure and averaging (as allowed under § 86.094-26(a)(6)(i)) to the same data set, the...) through (3) of this section. (1) All valid exhaust emission data from the tests required under § 86.094-26... § 86.094-29 for all tests conducted on all durability data vehicles of the combination selected under...

40 CFR 86.094-28 - Compliance with emission standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the outlier procedure and averaging (as allowed under § 86.094-26(a)(6)(i)) to the same data set, the...) through (3) of this section. (1) All valid exhaust emission data from the tests required under § 86.094-26... § 86.094-29 for all tests conducted on all durability data vehicles of the combination selected under...

40 CFR 86.094-28 - Compliance with emission standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the outlier procedure and averaging (as allowed under § 86.094-26(a)(6)(i)) to the same data set, the...) through (3) of this section. (1) All valid exhaust emission data from the tests required under § 86.094-26... § 86.094-29 for all tests conducted on all durability data vehicles of the combination selected under...

40 CFR 86.094-28 - Compliance with emission standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the outlier procedure and averaging (as allowed under § 86.094-26(a)(6)(i)) to the same data set, the...) through (3) of this section. (1) All valid exhaust emission data from the tests required under § 86.094-26... § 86.094-29 for all tests conducted on all durability data vehicles of the combination selected under...

40 CFR Appendix C to Part 300 - Swirling Flask Dispersant Effectiveness Test, Revised Standard Dispersant Toxicity Test, and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... the SIM mode at a scan rate of 1.5 scans/second to maximize the linear quantitative range and... Research Group, Texas A&M University, 833 Graham Rd., College Station, TX, 77845, (409) 690-0095. 8... following information is contained in the detailed quantitative reports: average RRF derived from the...

A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Smith, P. M.; Deal, P. L.

1980-01-01

Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

The determination of ethyl glucuronide in hair: Experiences from nine consecutive interlaboratory comparison rounds.

PubMed

Becker, R; Lô, I; Sporkert, F; Baumgartner, M

2018-07-01

The increasing request for hair ethyl glucuronide (HEtG) in alcohol consumption monitoring according to cut-off levels set by the Society of Hair Testing (SoHT) has triggered a proficiency testing program based on interlaboratory comparisons (ILC). Here, the outcome of nine consecutive ILC rounds organised by the SoHT on the determination of HEtG between 2011 and 2017 is summarised regarding interlaboratory reproducibility and the influence of procedural variants. Test samples prepared from cut hair (1mm) with authentic (in-vivo incorporated) and soaked (in-vitro incorporated) HEtG concentrations up to 80pg/mg were provided for 27-35 participating laboratories. Laboratory results were evaluated according to ISO 5725-5 and provided robust averages and relative reproducibility standard deviations typically between 20 and 35% in reasonable accordance with the prediction of the Horwitz model. Evaluation of results regarding the analytical techniques revealed no significant differences between gas and liquid chromatographic methods In contrast, a detailed evaluation of different sample preparations revealed significantly higher average values in case when pulverised hair is tested compared to cut hair. This observation was reinforced over the different ILC rounds and can be attributed to the increased acceptance and routine of hair pulverisation among laboratories. Further, the reproducibility standard deviations among laboratories performing pulverisation were on average in very good agreement with the prediction of the Horwitz model. Use of sonication showed no effect on the HEtG extraction yield. Copyright © 2018 Elsevier B.V. All rights reserved.

Individual Test Point Fluctuations of Macular Sensitivity in Healthy Eyes and Eyes With Age-Related Macular Degeneration Measured With Microperimetry.

PubMed

Barboni, Mirella Telles Salgueiro; Szepessy, Zsuzsanna; Ventura, Dora Fix; Németh, János

2018-04-01

To establish fluctuation limits, it was considered that not only overall macular sensitivity but also fluctuations of individual test points in the macula might have clinical value. Three repeated measurements of microperimetry were performed using the Standard Expert test of Macular Integrity Assessment (MAIA) in healthy subjects ( N = 12, age = 23.8 ± 1.5 years old) and in patients with age-related macular degeneration (AMD) ( N = 11, age = 68.5 ± 7.4 years old). A total of 37 macular points arranged in four concentric rings and in four quadrants were analyzed individually and in groups. The data show low fluctuation of macular sensitivity of individual test points in healthy subjects (average = 1.38 ± 0.28 dB) and AMD patients (average = 2.12 ± 0.60 dB). Lower sensitivity points are more related to higher fluctuation than to the distance from the central point. Fixation stability showed no effect on the sensitivity fluctuation. The 95th percentile of the standard deviations of healthy subjects was, on average, 2.7 dB, ranging from 1.2 to 4 dB, depending on the point tested. Point analysis and regional analysis might be considered prior to evaluating macular sensitivity fluctuation in order to distinguish between normal variation and a clinical change. S tatistical methods were used to compare repeated microperimetry measurements and to establish fluctuation limits of the macular sensitivity. This analysis could add information regarding the integrity of different macular areas and provide new insights into fixation points prior to the biofeedback fixation training.

A Preliminary Investigation into the Effect of Standards-Based Grading on the Academic Performance of African-American Students

NASA Astrophysics Data System (ADS)

Bradbury-Bailey, Mary

With the implementation of No Child Left Behind came a wave of educational reform intended for those working with student populations whose academic performance seemed to indicate an alienation from the educational process. Central to these reforms was the implementation of standards-based instruction and their accompanying standardized assessments; however, in one area reform seemed nonexistent---the teacher's gradebook. (Erickson, 2010, Marzano, 2006; Scriffiny, 2008). Given the link between the grading process and achievement motivation, Ames (1992) suggested the use of practices that promote mastery goal orientation. The purpose of this study was to examine the impact of standards-based grading system as a factor contributing to mastery goal orientation on the academic performance of urban African American students. To determine the degree of impact, this study first compared the course content averages and End-of-Course-Test (EOCT) scores for science classes using a traditional grading system to those using a standards-based grading system by employing an Analysis of Covariance (ANCOVA). While there was an increase in all grading areas, two showed a significant difference---the Physical Science course content average (p = 0.024) and ix the Biology EOCT scores (p = 0.0876). These gains suggest that standards-based grading can have a positive impact on the academic performance of African American students. Secondly, this study examined the correlation between the course content averages and the EOCT scores for both the traditional and standards-based grading system; for both Physical Science and Biology, there was a stronger correlation between these two scores for the standards-based grading system.

Performance Evaluation of Five Turbidity Sensors in Three Primary Standards

USGS Publications Warehouse

Snazelle, Teri T.

2015-10-28

Open-File Report 2015-1172 is temporarily unavailable.Five commercially available turbidity sensors were evaluated by the U.S. Geological Survey, Hydrologic Instrumentation Facility (HIF) for accuracy and precision in three types of turbidity standards; formazin, StablCal, and AMCO Clear (AMCO–AEPA). The U.S. Environmental Protection Agency (EPA) recognizes all three turbidity standards as primary standards, meaning they are acceptable for reporting purposes. The Forrest Technology Systems (FTS) DTS-12, the Hach SOLITAX sc, the Xylem EXO turbidity sensor, the Yellow Springs Instrument (YSI) 6136 turbidity sensor, and the Hydrolab Series 5 self-cleaning turbidity sensor were evaluated to determine if turbidity measurements in the three primary standards are comparable to each other, and to ascertain if the primary standards are truly interchangeable. A formazin 4000 nephelometric turbidity unit (NTU) stock was purchased and dilutions of 40, 100, 400, 800, and 1000 NTU were made fresh the day of testing. StablCal and AMCO Clear (for Hach 2100N) standards with corresponding concentrations were also purchased for the evaluation. Sensor performance was not evaluated in turbidity levels less than 40 NTU due to the unavailability of polymer-bead turbidity standards rated for general use. The percent error was calculated as the true (not absolute) difference between the measured turbidity and the standard value, divided by the standard value.The sensors that demonstrated the best overall performance in the evaluation were the Hach SOLITAX and the Hydrolab Series 5 turbidity sensor when the operating range (0.001–4000 NTU for the SOLITAX and 0.1–3000 NTU for the Hydrolab) was considered in addition to sensor accuracy and precision. The average percent error in the three standards was 3.80 percent for the SOLITAX and -4.46 percent for the Hydrolab. The DTS-12 also demonstrated good accuracy with an average percent error of 2.02 percent and a maximum relative standard deviation of 0.51 percent for the operating range, which was limited to 0.01–1600 NTU at the time of this report. Test results indicated an average percent error of 19.81 percent in the three standards for the EXO turbidity sensor and 9.66 percent for the YSI 6136. The significant variability in sensor performance in the three primary standards suggests that although all three types are accepted as primary calibration standards, they are not interchangeable, and sensor results in the three types of standards are not directly comparable.

40 CFR 464.34 - New source performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-continuous dischargers, annual average mass standards and maximum day and maximum for monthly average concentration (mg/l) standards shall apply. Concentration standards and annual average mass standards shall only... 40 Protection of Environment 31 2012-07-01 2012-07-01 false New source performance standards. 464...

40 CFR 464.34 - New source performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-continuous dischargers, annual average mass standards and maximum day and maximum for monthly average concentration (mg/l) standards shall apply. Concentration standards and annual average mass standards shall only... 40 Protection of Environment 30 2014-07-01 2014-07-01 false New source performance standards. 464...

40 CFR 464.34 - New source performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-continuous dischargers, annual average mass standards and maximum day and maximum for monthly average concentration (mg/l) standards shall apply. Concentration standards and annual average mass standards shall only... 40 Protection of Environment 31 2013-07-01 2013-07-01 false New source performance standards. 464...

Forecasting coconut production in the Philippines with ARIMA model

NASA Astrophysics Data System (ADS)

Lim, Cristina Teresa

2015-02-01

The study aimed to depict the situation of the coconut industry in the Philippines for the future years applying Autoregressive Integrated Moving Average (ARIMA) method. Data on coconut production, one of the major industrial crops of the country, for the period of 1990 to 2012 were analyzed using time-series methods. Autocorrelation (ACF) and partial autocorrelation functions (PACF) were calculated for the data. Appropriate Box-Jenkins autoregressive moving average model was fitted. Validity of the model was tested using standard statistical techniques. The forecasting power of autoregressive moving average (ARMA) model was used to forecast coconut production for the eight leading years.

Why is the age-standardized incidence of low-trauma fractures rising in many elderly populations?

PubMed

Kannus, Pekka; Niemi, Seppo; Parkkari, Jari; Palvanen, Mika; Heinonen, Ari; Sievänen, Harri; Järvinen, Teppo; Khan, Karim; Järvinen, Markku

2002-08-01

Low-trauma fractures of elderly people are a major public health burden worldwide, and as the number and mean age of older adults in the population continue to increase, the number of fractures is also likely to increase. Epidemiologically, however, an additional concern is that, for unknown reasons, the age-standardized incidence (average individual risk) of fracture has also risen in many populations during the recent decades. Possible reasons for this rise include a birth cohort effect, deterioration in the average bone strength by time, and increased average risk of (serious) falls. Literature provides evidence that the rise is not due to a birth cohort effect, whereas no study shows whether bone fragility has increased during this relatively short period of time. This osteoporosis hypothesis could, however, be tested if researchers would now repeat the population measurements of bone mass and density that were made in the late 1980s and the 1990s. If such studies proved that women's and men's age-standardized mean values of bone mass and density have declined over time, the osteoporosis hypothesis would receive scientific support. The third explanation is based on the hypothesis that the number and/or severity of falls has risen in elderly populations during the recent decades. Although no study has directly tested this hypothesis, a great deal of indirect epidemiologic evidence supports this contention. For example, the age-standardized incidence of fall-induced severe head injuries, bruises and contusions, and joint distortions and dislocations has increased among elderly people similarly to the low-trauma fractures. The fall hypothesis could also be tested in the coming years because the 1990s saw many research teams reporting age- and sex-specific incidences of falling for elderly populations, and the same could be done now to provide data comparing the current incidence rates of falls with the earlier ones.

40 CFR 63.1325 - Batch process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Cj=Average inlet or outlet concentration of TOC or sample organic HAP component j of the gas stream...), where standard temperature is 20 °C. Cj=Inlet or outlet concentration of TOC or sample organic HAP...

40 CFR 63.1325 - Batch process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Cj=Average inlet or outlet concentration of TOC or sample organic HAP component j of the gas stream...), where standard temperature is 20 °C. Cj=Inlet or outlet concentration of TOC or sample organic HAP...

40 CFR 63.1325 - Batch process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Cj=Average inlet or outlet concentration of TOC or sample organic HAP component j of the gas stream...), where standard temperature is 20 °C. Cj=Inlet or outlet concentration of TOC or sample organic HAP...

Chesapeake Bay Low Freshwater Inflow Study. Phase II. MAP FOLIO. Biota Assessment.

DTIC Science & Technology

1982-05-01

conditions. These were: 1) Base Average -- average freshwater inflow conditions. by increased water consumption projected for the year 2020. 3) Base Drought...RESOLUTION TEST CHART NATIONAL BUREAU OF STANDARDS. 1963- A TAI m - ii J May 1982 Chesapeake Bay Low Freshwater Inflow Study Phase II Biota Assessment Map...A PERIOD ZOVERED change was found to CIESAPEAKE BAY LOW FRESHWATER INFLOW STUDY FINAL BIOTA ASSESSMENT PHASE II: FINAL REPORT MAP FOLIO s PERFORMING

49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to... EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.11 Termination of exemption; amendment of alternative average fuel economy standard. (a) Any exemption granted under this part for an affected model year does...

49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to... EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.11 Termination of exemption; amendment of alternative average fuel economy standard. (a) Any exemption granted under this part for an affected model year does...

49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to... EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.11 Termination of exemption; amendment of alternative average fuel economy standard. (a) Any exemption granted under this part for an affected model year does...

49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to... EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.11 Termination of exemption; amendment of alternative average fuel economy standard. (a) Any exemption granted under this part for an affected model year does...

Diagnostic Consistency and Relation Between Optical Coherence Tomography and Standard Automated Perimetry in Primary Open-Angle Glaucoma.

PubMed

Toprak, Ibrahim; Yaylalı, Volkan; Yildirim, Cem

2017-01-01

To assess diagnostic consistency and relation between spectral-domain optical coherence tomography (SD-OCT) and standard automated perimetry (SAP) in patients with primary open-angle glaucoma (POAG). This retrospective study comprised 51 eyes of 51 patients with a confirmed diagnosis of POAG. The qualitative and quantitative SD-OCT parameters (retinal nerve fiber layer thicknesses [RNFL; average, superior, inferior, nasal and temporal], RNFL symmetry, rim area, disc area, average and vertical cup/disc [C/D] ratio and cup volume) were compared with parameters of SAP (mean deviation, pattern standard deviation, visual field index, and glaucoma hemifield test reports). Fifty-one eyes of 51 patients with POAG were recruited. Twenty-nine eyes (56.9%) had consistent RNFL and visual field (VF) damage. However, nine patients (17.6%) showed isolated RNFL damage on SD-OCT and 13 patients (25.5%) had abnormal VF test with normal RNFL. In patients with VF defect, age, average C/D ratio, vertical C/D ratio, and cup volume were significantly higher and rim area was lower when compared to those of the patients with normal VF. In addition to these parameters, worsening in average, superior, inferior, and temporal RNFL thicknesses and RNFL symmetry was significantly associated with consistent SD-OCT and SAP outcomes. In routine practice, patients with POAG can be manifested with inconsistent reports between SD-OCT and SAP. An older age, higher C/D ratio, larger cup volume, and lower rim area on SD-OCT appears to be associated with detectable VF damage. Moreover, additional worsening in RNFL parameters might reinforce diagnostic consistency between SD-OCT and SAP.

An immediate effect of custom-made ankle foot orthoses on postural stability in older adults.

PubMed

Yalla, Sai V; Crews, Ryan T; Fleischer, Adam E; Grewal, Gurtej; Ortiz, Jacque; Najafi, Bijan

2014-12-01

Foot and ankle problems are highly prevalent fall risks in the elderly. Ankle foot orthoses designed to stabilize the foot and ankles have been studied within specific patient groups, but their efficacy with a less restrictive elderly population is unknown. This study investigated if custom-made ankle foot orthoses improve postural stability in older adults. Thirty ambulatory older adults averaged 73 (standard deviation=6.5) years completed Romberg's balance (eyes-open/eyes-closed), functional reach, and Timed Up and Go tests while wearing validated kinematic sensors. Each test was completed in standardized shoes with and without bilateral orthoses. Additionally, barefoot trials were conducted for the Romberg's and functional reach tests. Compared to the barefoot and 'shoes alone' conditions, the orthoses reduced center of mass sway on average by 49.0% (P=0.087) and 40.7% (P=0.005) during eyes-open balance trials. The reduction was amplified during the eyes-closed trials with average reductions of 65.9% (P=0.000) and 47.8% (P=0.004), compared to barefoot and 'shoes alone' conditions. The orthoses did not limit functional reach distance nor timed-up and go completion times. However, the medial-lateral postural coordination while reaching was improved significantly with orthoses compared to barefoot (14.3%; P=0.030) and 'shoes alone' (13.5%; P=0.039) conditions. Ankle foot orthoses reduced postural sway and improved lower extremity coordination in the elderly participants without limiting their ability to perform a standard activity of daily living. Additional studies are required to determine if these benefits are retained and subsequently translate into fewer falls. Copyright © 2014. Published by Elsevier Ltd.

Indirect and direct methods for measuring a dynamic throat diameter in a solid rocket motor

NASA Astrophysics Data System (ADS)

Colbaugh, Lauren

In a solid rocket motor, nozzle throat erosion is dictated by propellant composition, throat material properties, and operating conditions. Throat erosion has a significant effect on motor performance, so it must be accurately characterized to produce a good motor design. In order to correlate throat erosion rate to other parameters, it is first necessary to know what the throat diameter is throughout a motor burn. Thus, an indirect method and a direct method for determining throat diameter in a solid rocket motor are investigated in this thesis. The indirect method looks at the use of pressure and thrust data to solve for throat diameter as a function of time. The indirect method's proof of concept was shown by the good agreement between the ballistics model and the test data from a static motor firing. The ballistics model was within 10% of all measured and calculated performance parameters (e.g. average pressure, specific impulse, maximum thrust, etc.) for tests with throat erosion and within 6% of all measured and calculated performance parameters for tests without throat erosion. The direct method involves the use of x-rays to directly observe a simulated nozzle throat erode in a dynamic environment; this is achieved with a dynamic calibration standard. An image processing algorithm is developed for extracting the diameter dimensions from the x-ray intensity digital images. Static and dynamic tests were conducted. The measured diameter was compared to the known diameter in the calibration standard. All dynamic test results were within +6% / -7% of the actual diameter. Part of the edge detection method consists of dividing the entire x-ray image by an average pixel value, calculated from a set of pixels in the x-ray image. It was found that the accuracy of the edge detection method depends upon the selection of the average pixel value area and subsequently the average pixel value. An average pixel value sensitivity analysis is presented. Both the indirect method and the direct method prove to be viable approaches to determining throat diameter during solid rocket motor operation.

A Goniometry Paradigm Shift to Measure Burn Scar Contracture in Burn Patients

DTIC Science & Technology

2017-10-01

test more extensively a recently designed Revised Goniometry (RG) method and compare it to Standard Goniometry (SG)used to measure burn scar...joint angle measurements willbe found between SG techniques compared to RG techniques which incorporate CKM and CFU principles. Specific Aim 1: To... compare the average reduction in joint range of motion measured with the standard GM measurements to a newly conceived set of revised GM measurements in

Geostatistics as a validation tool for setting ozone standards for durum wheat.

PubMed

De Marco, Alessandra; Screpanti, Augusto; Paoletti, Elena

2010-02-01

Which is the best standard for protecting plants from ozone? To answer this question, we must validate the standards by testing biological responses vs. ambient data in the field. A validation is missing for European and USA standards, because the networks for ozone, meteorology and plant responses are spatially independent. We proposed geostatistics as validation tool, and used durum wheat in central Italy as a test. The standards summarized ozone impact on yield better than hourly averages. Although USA criteria explained ozone-induced yield losses better than European criteria, USA legal level (75 ppb) protected only 39% of sites. European exposure-based standards protected > or =90%. Reducing the USA level to the Canadian 65 ppb or using W126 protected 91% and 97%, respectively. For a no-threshold accumulated stomatal flux, 22 mmol m(-2) was suggested to protect 97% of sites. In a multiple regression, precipitation explained 22% and ozone explained <0.9% of yield variability. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Effect of the New York State cigarette fire safety standard on ignition propensity, smoke constituents, and the consumer market.

PubMed

Connolly, G N; Alpert, H R; Rees, V; Carpenter, C; Wayne, G F; Vallone, D; Koh, H

2005-10-01

This study examines empirical evidence from the New York experience testing tobacco industry arguments made in opposition to fire safety standards for cigarettes. Percentages of cigarettes exhibiting full length burns (FLBs), cigarette sales before and following the implementation of the New York standards, a sample of retail cigarette prices, brand availability, and selected smoke constituent yields were compared between cigarettes sold in New York and two other states. Cigarette paper analysis was conducted on cigarettes sold in New York. New York cigarette brands averaged 10.0% FLBs as compared to 99.8% for California and Massachusetts brands. Reduced ignition propensity (RIP) appears to have been achieved by cigarette paper banding. Cigarette sales, prices, and brand availability do not appear to have been affected by the New York standards. Yields of the majority of smoke constituents tested did not differ substantially between RIP cigarettes sold in New York as compared to the same brands sold in Massachusetts. Average yields of tar, carbon monoxide, and two compounds were slightly higher, the yields of seven compounds were higher for one brand only, and nicotine was lower, among New York brands tested. RIP cigarette brands have been designed to meet the New York fire safety standards. Their introduction has not affected cigarette sales or prices in New York. There is no evidence that the small increases in smoke constituent yields affect the already highly toxic nature of cigarette smoke. Data on smoking caused fires, deaths, and injuries dating from after the change in law are not yet available. Such data will be able to address the question of whether the demonstrated reduced ignition standards are associated with reduced fires and injuries. Based on the New York experience, prior industry objections to producing RIP cigarettes are unfounded. Other states and nations should adopt similar standards.

Combining forecast weights: Why and how?

NASA Astrophysics Data System (ADS)

Yin, Yip Chee; Kok-Haur, Ng; Hock-Eam, Lim

2012-09-01

This paper proposes a procedure called forecast weight averaging which is a specific combination of forecast weights obtained from different methods of constructing forecast weights for the purpose of improving the accuracy of pseudo out of sample forecasting. It is found that under certain specified conditions, forecast weight averaging can lower the mean squared forecast error obtained from model averaging. In addition, we show that in a linear and homoskedastic environment, this superior predictive ability of forecast weight averaging holds true irrespective whether the coefficients are tested by t statistic or z statistic provided the significant level is within the 10% range. By theoretical proofs and simulation study, we have shown that model averaging like, variance model averaging, simple model averaging and standard error model averaging, each produces mean squared forecast error larger than that of forecast weight averaging. Finally, this result also holds true marginally when applied to business and economic empirical data sets, Gross Domestic Product (GDP growth rate), Consumer Price Index (CPI) and Average Lending Rate (ALR) of Malaysia.

Evaluation of DNA barcoding and identification of new haplomorphs in Canadian deerflies and horseflies.

PubMed

Cywinska, A; Hannan, M A; Kevan, P G; Roughley, R E; Iranpour, M; Hunter, F F

2010-12-01

This paper reports the first tests of the suitability of the standardized mitochondrial cytochrome c oxidase subunit I (COI) barcoding system for the identification of Canadian deerflies and horseflies. Two additional mitochondrial molecular markers were used to determine whether unambiguous species recognition in tabanids can be achieved. Our 332 Canadian tabanid samples yielded 650 sequences from five genera and 42 species. Standard COI barcodes demonstrated a strong A + T bias (mean 68.1%), especially at third codon positions (mean 93.0%). Our preliminary test of this system showed that the standard COI barcode worked well for Canadian Tabanidae: the target DNA can be easily recovered from small amounts of insect tissue and aligned for all tabanid taxa. Each tabanid species possessed distinctive sets of COI haplotypes which discriminated well among species. Average conspecific Kimura two-parameter (K2P) divergence (0.49%) was 12 times lower than the average divergence within species. Both the neighbour-joining and the Bayesian methods produced trees with identical monophyletic species groups. Two species, Chrysops dawsoni Philip and Chrysops montanus Osten Sacken (Diptera: Tabanidae), showed relatively deep intraspecific sequence divergences (∼ 10 times the average) for all three mitochondrial gene regions analysed. We suggest provisional differentiation of Ch. montanus into two haplotypes, namely, Ch. montanus haplomorph 1 and Ch. montanus haplomorph 2, both defined by their molecular sequences and by newly discovered differences in structural features near their ocelli. © 2010 Brock University. Medical and Veterinary Entomology © 2010 The Royal Entomological Society.

Evaluation of a standardized procedure for [corrected] microscopic cell counts [corrected] in body fluids.

PubMed

Emerson, Jane F; Emerson, Scott S

2005-01-01

A standardized urinalysis and manual microscopic cell counting system was evaluated for its potential to reduce intra- and interoperator variability in urine and cerebrospinal fluid (CSF) cell counts. Replicate aliquots of pooled specimens were submitted blindly to technologists who were instructed to use either the Kova system with the disposable Glasstic slide (Hycor Biomedical, Inc., Garden Grove, CA) or the standard operating procedure of the University of California-Irvine (UCI), which uses plain glass slides for urine sediments and hemacytometers for CSF. The Hycor system provides a mechanical means of obtaining a fixed volume of fluid in which to resuspend the sediment, and fixes the volume of specimen to be microscopically examined by using capillary filling of a chamber containing in-plane counting grids. Ninety aliquots of pooled specimens of each type of body fluid were used to assess the inter- and intraoperator reproducibility of the measurements. The variability of replicate Hycor measurements made on a single specimen by the same or different observers was compared with that predicted by a Poisson distribution. The Hycor methods generally resulted in test statistics that were slightly lower than those obtained with the laboratory standard methods, indicating a trend toward decreasing the effects of various sources of variability. For 15 paired aliquots of each body fluid, tests for systematically higher or lower measurements with the Hycor methods were performed using the Wilcoxon signed-rank test. Also examined was the average difference between the Hycor and current laboratory standard measurements, along with a 95% confidence interval (CI) for the true average difference. Without increasing labor or the requirement for attention to detail, the Hycor method provides slightly better interrater comparisons than the current method used at UCI. Copyright 2005 Wiley-Liss, Inc.

Up-down Asymmetries in Speed Perception

NASA Technical Reports Server (NTRS)

Thompson, Peter; Stone, Leland S.

1997-01-01

We compared speed matches for pairs of stimuli that moved in opposite directions (upward and downward). Stimuli were elliptical patches (2 deg horizontally by 1 deg vertically) of horizontal sinusoidal gratings of spatial. frequency 2 cycles/deg. Two sequential 380 msec reveal presentations were compared. One of each pair of gratings (the standard) moved at 4 Hz (2 deg/sec), the other (the test) moved at a rate determined by a simple up-down staircase. The point of subjectively equal speed was calculated from the average of the last eight reversals. The task was to fixate a central point and to determine which one of the pair appeared to move faster. Eight of 10 observers perceived the upward drifting grating as moving faster than a grating moving downward but otherwise identical. on average (N = 10), when the standard moved downward, it was matched by a test moving upward at 94.7+/-1.7(SE)% of the standard speed, and when the standard moved upward it was matched by a test moving downward at 105.1+/-2.3(SE)% of the standard speed. Extending this paradigm over a range of spatial (1.5 to 13.5 c/d) and temporal (1.5 to 13.5 Hz) frequencies, preliminary results (N = 4) suggest that, under the conditions of our experiment, upward matter is seen as faster than downward for speeds greater than approx.1 deg/sec, but the effect appears to reverse at speeds below approx.1 deg/sec with downward motion perceived as faster. Given that an up-down asymmetry has been observed for the optokinetic response, both perceptual and oculomotor contributions to this phenomenon deserve exploration.

Nitrogen and Phosphorus Pollutants in Cosmetics Wastewater and Its Treatment Process of a Certain Brand

NASA Astrophysics Data System (ADS)

Ma, Guosheng; Chen, Juan

2018-02-01

Cosmetics wastewater is one of the sources of nitrogen and phosphorus pollutants that cause eutrophication of water bodies. This paper is to test the cosmetics wastewater in the production process with American Hach method, and the pH and other indicators would be detected during a whole production cycle. The results show that the pH value in wastewater is 8.6~8.7 (average 8.67), SS 880~1090 mg. L-1 (average 968.57), TN 65.2~100.4 mg.m-3 (average 80.50), TP 6.6~11.4 mg.m-3 (average 9.84), NH3-N 44.2~77.0 mg.m-3 (average 55.61), COD 4650~5900 mg.m-3 (average 5490). After pollutant treatment, the nitrogen and phosphorus pollutants in wastewater can reach the standard discharge.

Insights from analysis for harmful and potentially harmful constituents (HPHCs) in tobacco products.

PubMed

Oldham, Michael J; DeSoi, Darren J; Rimmer, Lonnie T; Wagner, Karl A; Morton, Michael J

2014-10-01

A total of 20 commercial cigarette and 16 commercial smokeless tobacco products were assayed for 96 compounds listed as harmful and potentially harmful constituents (HPHCs) by the US Food and Drug Administration. For each product, a single lot was used for all testing. Both International Organization for Standardization and Health Canada smoking regimens were used for cigarette testing. For those HPHCs detected, measured levels were consistent with levels reported in the literature, however substantial assay variability (measured as average relative standard deviation) was found for most results. Using an abbreviated list of HPHCs, statistically significant differences for most of these HPHCs occurred when results were obtained 4-6months apart (i.e., temporal variability). The assay variability and temporal variability demonstrate the need for standardized analytical methods with defined repeatability and reproducibility for each HPHC using certified reference standards. Temporal variability also means that simple conventional comparisons, such as two-sample t-tests, are inappropriate for comparing products tested at different points in time from the same laboratory or from different laboratories. Until capable laboratories use standardized assays with established repeatability, reproducibility, and certified reference standards, the resulting HPHC data will be unreliable for product comparisons or other decision making in regulatory science. Copyright © 2014 Elsevier Inc. All rights reserved.

Children with 7q11.23 Duplication Syndrome: Psychological Characteristics

PubMed Central

Mervis, Carolyn B.; Klein-Tasman, Bonita P.; Huffman, Myra J.; Velleman, Shelley L.; Pitts, C. Holley; Henderson, Danielle R.; Woodruff-Borden, Janet; Morris, Colleen A.; Osborne, Lucy R.

2015-01-01

To begin to delineate the psychological characteristics associated with classic 7q11.23 duplication syndrome (duplication of the classic Williams syndrome region; hereafter classic Dup7), we tested 63 children with classic Dup7 aged 4–17 years. Sixteen toddlers aged 18–45 months with classic Dup7 and 12 adults identified by cascade testing also were assessed. For the child group, median General Conceptual Ability (similar to IQ) on the Differential Ability Scales-II was 85.0 (low average), with a range from severe disability to high average ability. Median reading and mathematics achievement standard scores were at the low average to average level, with a range from severe impairment to high average or superior ability. Adaptive behavior was considerably more limited; median Scales of Independent Behavior—Revised Broad Independence standard score was 62.0 (mild impairment), with a range from severe adaptive impairment to average adaptive ability. Anxiety disorders were common, with 50.0% of children diagnosed with Social Phobia, 29.0% with Selective Mutism, 12.9% with Separation Anxiety Disorder, and 53.2% with Specific Phobia. In addition, 35.5% were diagnosed with Attention Deficit/Hyperactivity Disorder and 24.2% with Oppositional Defiant Disorder or Disruptive Behavior Disorder-Not Otherwise Specified. 33.3% of the children screened positive for a possible Autism Spectrum Disorder and 82.3% were diagnosed with Speech Sound Disorder. We compare these findings to previously reported results for children with Williams syndrome and argue that genotype/phenotype studies involving the Williams syndrome region offer important opportunities to understand the contribution of genes in this region to common disorders affecting the general population. PMID:25900101

Children with 7q11.23 duplication syndrome: psychological characteristics.

PubMed

Mervis, Carolyn B; Klein-Tasman, Bonita P; Huffman, Myra J; Velleman, Shelley L; Pitts, C Holley; Henderson, Danielle R; Woodruff-Borden, Janet; Morris, Colleen A; Osborne, Lucy R

2015-07-01

To begin to delineate the psychological characteristics associated with classic 7q11.23 duplication syndrome (duplication of the classic Williams syndrome region; hereafter classic Dup7), we tested 63 children with classic Dup7 aged 4-17 years. Sixteen toddlers aged 18-45 months with classic Dup7 and 12 adults identified by cascade testing also were assessed. For the child group, median General Conceptual Ability (similar to IQ) on the Differential Ability Scales-II was 85.0 (low average), with a range from severe disability to high average ability. Median reading and mathematics achievement standard scores were at the low average to average level, with a range from severe impairment to high average or superior ability. Adaptive behavior was considerably more limited; median Scales of Independent Behavior-Revised Broad Independence standard score was 62.0 (mild impairment), with a range from severe adaptive impairment to average adaptive ability. Anxiety disorders were common, with 50.0% of children diagnosed with Social Phobia, 29.0% with Selective Mutism, 12.9% with Separation Anxiety Disorder, and 53.2% with Specific Phobia. In addition, 35.5% were diagnosed with Attention Deficit/Hyperactivity Disorder and 24.2% with Oppositional Defiant Disorder or Disruptive Behavior Disorder-Not Otherwise Specified. 33.3% of the children screened positive for a possible Autism Spectrum Disorder and 82.3% were diagnosed with Speech Sound Disorder. We compare these findings to previously reported results for children with Williams syndrome and argue that genotype/phenotype studies involving the Williams syndrome region offer important opportunities to understand the contribution of genes in this region to common disorders affecting the general population. © 2015 Wiley Periodicals, Inc.

Titrating Oxygen Requirements During Exercise: Evaluation of a Standardized Single Walk Test Protocol.

PubMed

Giovacchini, Coral X; Mathews, Anne M; Lawlor, Brian R; MacIntyre, Neil R

2018-04-01

Oxygen supplementation for exercise-induced hypoxemia is a common clinical practice that improves exercise tolerance. However, we know of no standardized exercise oxygen titration protocol using a single walk test. We report our experience with a protocol developed in our laboratory. Our protocol is based on the 6-min walk test (6MWT). Pulse oximetry readings (oxygen saturation [Spo 2 ]) are monitored, and supplemental oxygen is added in 2 L/min increments to keep Spo 2 > 88%. This continues for at least 6 min of walking with the Spo 2 remaining > 88% for at least 3 min. The records of consecutive patients over 4 months undergoing this procedure were reviewed for test performance, oxygen titration results, and adverse events. Two hundred twenty-two patients were tested; only two prematurely terminated the protocol because of intractable dyspnea. One hundred fifty-six patients (38%) required oxygen supplementation, with the first titration most commonly occurring between 1 and 2 min of walking. Nine of the patients had the first titration after 5 min of walking. The average test duration was 7 min (maximum, 15 min). The average number of titrations was 2.2 (maximum six). Sixteen patients could not maintain Spo 2 > 88% for 3 min despite administration of 15 L/min of supplemental oxygen (maximal dose). Our protocol was easily performed as a modification of a standard 6MWT with no serious adverse events. Because it is based on a widely accepted measurement of functional capabilities, and because it determined a stable final oxygen dose for ≥ 3 min of walking in most patients, we believe this protocol can be easily adapted for clinical use. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Experimental comparison of icing cloud instruments

NASA Technical Reports Server (NTRS)

Olsen, W.; Takeuchi, D. M.; Adams, K.

1983-01-01

Icing cloud instruments were tested in the spray cloud Icing Research Tunnel (IRT) in order to determine their relative accuracy and their limitations over a broad range of conditions. It was found that the average of the readings from each of the liquid water content (LWC) instruments tested agreed closely with each other and with the IRT calibration; but all have a data scatter (+ or - one standard deviation) of about + or - 20 percent. The effect of this + or - 20 percent uncertainty is probably acceptable in aero-penalty and deicer experiments. Existing laser spectrometers proved to be too inaccurate for LWC measurements. The error due to water runoff was the same for all ice accretion LWC instruments. Any given laser spectrometer proved to be highly repeatable in its indications of volume median drop size (DVM), LWC and drop size distribution. However, there was a significant disagreement between different spectrometers of the same model, even after careful standard calibration and data analysis. The scatter about the mean of the DVM data from five Axial Scattering Spectrometer Probes was + or - 20 percent (+ or - one standard deviation) and the average was 20 percent higher than the old IRT calibration. The + or - 20 percent uncertainty in DVM can cause an unacceptable variation in the drag coefficient of an airfoil with ice; however, the variation in a deicer performance test may be acceptable.

Developing and Testing a Robust, Multi-Scale Framework for the Recovery of Longleaf Pine Understory Communities

DTIC Science & Technology

2015-05-01

Model averaging for species richness on post-agricultural sites (1000 m2) with a landscape radius of 150 m. Table 3.4.8. Model selection for species ... richness on post-agricultural sites (1000 m2) with a landscape radius of 150 m. Table 3.4.9. Model averaging for proportion of reference species on...Direct, indirect, and total standardized effects on species richness . Table 4.1.1. Species and number of seeds added to the experimental plots at

Numerical and experimental research on pentagonal cross-section of the averaging Pitot tube

NASA Astrophysics Data System (ADS)

Zhang, Jili; Li, Wei; Liang, Ruobing; Zhao, Tianyi; Liu, Yacheng; Liu, Mingsheng

2017-07-01

Averaging Pitot tubes have been widely used in many fields because of their simple structure and stable performance. This paper introduces a new shape of the cross-section of an averaging Pitot tube. Firstly, the structure of the averaging Pitot tube and the distribution of pressure taps are given. Then, a mathematical model of the airflow around it is formulated. After that, a series of numerical simulations are carried out to optimize the geometry of the tube. The distribution of the streamline and pressures around the tube are given. To test its performance, a test platform was constructed in accordance with the relevant national standards and is described in this paper. Curves are provided, linking the values of flow coefficient with the values of Reynolds number. With a maximum deviation of only  ±3%, the results of the flow coefficient obtained from the numerical simulations were in agreement with those obtained from experimental methods. The proposed tube has a stable flow coefficient and favorable metrological characteristics.

Ethnic identity, school connectedness, and achievement in standardized tests among Mexican-origin youth.

PubMed

Santos, Carlos E; Collins, Mary Ann

2016-07-01

The aim of this study was to investigate the association between school connectedness and performance in standardized test scores and whether this association was moderated by ethnic private regard. The study combines self-report data with school district reported data on standardized test scores in reading and math and free and reduced lunch status. Participants included 436 Mexican-origin youth attending a middle school in a southwestern U.S. state. Participants were on average 12.34 years of age (SD = .95) and 51.8% female and 48.2% male. After controlling for age, gender, free and reduced lunch status, and generational status, school connectedness and ethnic private regard were both positive predictors of standardized test scores in reading and math. Results also revealed a significant interaction between school connectedness and ethnic private regard in predicting standardized test scores in reading, such that participants who were low on ethnic private regard and low on school connectedness reported lower levels of achievement compared to participants who were low on ethnic private regard but high on school connectedness. At high levels of ethnic private regard, high or low levels of school connectedness were not associated with higher or lower standardized test scores in reading. The findings in this study provide support for the protective role that ethnic private regard plays in the educational experiences of Mexican-origin youth and highlights how the local school context may play a role in shaping this finding. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

77 FR 21311 - Locomotive Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-09

... brake maintenance are based on this extensive history of study and testing. Over the last several... Working Group discussions, FRA conducted a study to determine the average temperature in each type of locomotive cab commonly used at the time. The study concluded that at the location where the engineer...

Improving student achievement through daily activities and assessments in Introduction to Physics

NASA Astrophysics Data System (ADS)

Coppins, Kelly Ann

The combination of a hands-on approach to science with the accountability of daily assessments provides a greater opportunity for students who traditionally receive below-average grades to be successful in science classes. The addition of competitive elements and real world applications plays to their strengths as kinesthetic learners without sacrificing the rigor required to meet graduation standards. Further, daily assessment allows students to develop test-taking skills they will need for the standardized tests used by the state and for college admission. Finally, the combination of daily feedback and daily accountability prevents a struggling student from slipping through the cracks.

The influence of Saccharomyces cerevisiae enzyme ratio on preparation virgin coconut oil for candidate in-house reference materials

NASA Astrophysics Data System (ADS)

Rohyami, Yuli; Anjani, Rafika Debby; Purwanti, Napthalina Putri

2017-03-01

Virgin coconut oil is an excellent product which has result of oil processing business opportunities in the international market. Standardization of virgin coconut oil necessary to satisfy the requirements industry needs. This research is expected as procedure preparation of reference materials. Preparation of virgin coconut oil by Sacharomycescerevisiaeenzyme. Based on the results of this study concluded that the ratio of Saccharomyces cerevisiae can affect the yield of virgin coconut oil produced. The preparation of virgin coconut oil enzymatically using a variety of mass ratio of 0.001 to 0.006% is obtained yield average of 12.40%. The optimum separation of virgin coconut oil on the use of enzymes with a mass ratio of 0.002%. The average water content at a ratio of 0.002% is 0.04 % with a value of uncertainty is 0.005%. The average iodine number in virgin coconut oil produced is 2.4403 ± 0,1974 grams of iodine per 100 grams of oil and optimum iodine number is obtained from the manufacturing process virgin coconut oil with a ratio of 0.006% Saccharomyces cerevisiae. Sacharomycescerevisiae with a ratio of 0.002% results virgin coconut oil with acid number 0.3068 ± 0.1098%. The peroxide value of virgin coconut oil between 0.0108 ± 0.009 to 0.0114 ± 0015milli-equivalent per kilograms. Organoleptic test results and test chemical parameters can be used as the test data that can be developed in prototype preparation of candidate in-house reference material in the testing standards of quality virgin coconut oil.

Reliability and Repetition Effect of the Center of Pressure and Kinematics Parameters That Characterize Trunk Postural Control During Unstable Sitting Test.

PubMed

Barbado, David; Moreside, Janice; Vera-Garcia, Francisco J

2017-03-01

Although unstable seat methodology has been used to assess trunk postural control, the reliability of the variables that characterize it remains unclear. To analyze reliability and learning effect of center of pressure (COP) and kinematic parameters that characterize trunk postural control performance in unstable seating. The relationships between kinematic and COP parameters also were explored. Test-retest reliability design. Biomechanics laboratory setting. Twenty-three healthy male subjects. Participants volunteered to perform 3 sessions at 1-week intervals, each consisting of five 70-second balancing trials. A force platform and a motion capture system were used to measure COP and pelvis, thorax, and spine displacements. Reliability was assessed through standard error of measurement (SEM) and intraclass correlation coefficients (ICC 2,1 ) using 3 methods: (1) comparing the last trial score of each day; (2) comparing the best trial score of each day; and (3) calculating the average of the three last trial scores of each day. Standard deviation and mean velocity were calculated to assess balance performance. Although analyses of variance showed some differences in balance performance between days, these differences were not significant between days 2 and 3. Best result and average methods showed the greatest reliability. Mean velocity of the COP showed high reliability (0.71 < ICC < 0.86; 10.3 < SEM < 13.0), whereas standard deviation only showed a low to moderate reliability (0.37 < ICC < 0.61; 14.5 < SEM < 23.0). Regarding the kinematic variables, only pelvis displacement mean velocity achieved a high reliability using the average method (0.62 < ICC < 0.83; 18.8 < SEM < 23.1). Correlations between COP and kinematics were high only for mean velocity (0.45

Testing averaged cosmology with type Ia supernovae and BAO data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santos, B.; Alcaniz, J.S.; Coley, A.A.

An important problem in precision cosmology is the determination of the effects of averaging and backreaction on observational predictions, particularly in view of the wealth of new observational data and improved statistical techniques. In this paper, we discuss the observational viability of a class of averaged cosmologies which consist of a simple parametrized phenomenological two-scale backreaction model with decoupled spatial curvature parameters. We perform a Bayesian model selection analysis and find that this class of averaged phenomenological cosmological models is favored with respect to the standard ΛCDM cosmological scenario when a joint analysis of current SNe Ia and BAO datamore » is performed. In particular, the analysis provides observational evidence for non-trivial spatial curvature.« less

Estimation of Uncertainties in the Global Distance Test (GDT_TS) for CASP Models.

PubMed

Li, Wenlin; Schaeffer, R Dustin; Otwinowski, Zbyszek; Grishin, Nick V

2016-01-01

The Critical Assessment of techniques for protein Structure Prediction (or CASP) is a community-wide blind test experiment to reveal the best accomplishments of structure modeling. Assessors have been using the Global Distance Test (GDT_TS) measure to quantify prediction performance since CASP3 in 1998. However, identifying significant score differences between close models is difficult because of the lack of uncertainty estimations for this measure. Here, we utilized the atomic fluctuations caused by structure flexibility to estimate the uncertainty of GDT_TS scores. Structures determined by nuclear magnetic resonance are deposited as ensembles of alternative conformers that reflect the structural flexibility, whereas standard X-ray refinement produces the static structure averaged over time and space for the dynamic ensembles. To recapitulate the structural heterogeneous ensemble in the crystal lattice, we performed time-averaged refinement for X-ray datasets to generate structural ensembles for our GDT_TS uncertainty analysis. Using those generated ensembles, our study demonstrates that the time-averaged refinements produced structure ensembles with better agreement with the experimental datasets than the averaged X-ray structures with B-factors. The uncertainty of the GDT_TS scores, quantified by their standard deviations (SDs), increases for scores lower than 50 and 70, with maximum SDs of 0.3 and 1.23 for X-ray and NMR structures, respectively. We also applied our procedure to the high accuracy version of GDT-based score and produced similar results with slightly higher SDs. To facilitate score comparisons by the community, we developed a user-friendly web server that produces structure ensembles for NMR and X-ray structures and is accessible at http://prodata.swmed.edu/SEnCS. Our work helps to identify the significance of GDT_TS score differences, as well as to provide structure ensembles for estimating SDs of any scores.

Statistical performance of image cytometry for DNA, lipids, cytokeratin, & CD45 in a model system for circulation tumor cell detection.

PubMed

Futia, Gregory L; Schlaepfer, Isabel R; Qamar, Lubna; Behbakht, Kian; Gibson, Emily A

2017-07-01

Detection of circulating tumor cells (CTCs) in a blood sample is limited by the sensitivity and specificity of the biomarker panel used to identify CTCs over other blood cells. In this work, we present Bayesian theory that shows how test sensitivity and specificity set the rarity of cell that a test can detect. We perform our calculation of sensitivity and specificity on our image cytometry biomarker panel by testing on pure disease positive (D + ) populations (MCF7 cells) and pure disease negative populations (D - ) (leukocytes). In this system, we performed multi-channel confocal fluorescence microscopy to image biomarkers of DNA, lipids, CD45, and Cytokeratin. Using custom software, we segmented our confocal images into regions of interest consisting of individual cells and computed the image metrics of total signal, second spatial moment, spatial frequency second moment, and the product of the spatial-spatial frequency moments. We present our analysis of these 16 features. The best performing of the 16 features produced an average separation of three standard deviations between D + and D - and an average detectable rarity of ∼1 in 200. We performed multivariable regression and feature selection to combine multiple features for increased performance and showed an average separation of seven standard deviations between the D + and D - populations making our average detectable rarity of ∼1 in 480. Histograms and receiver operating characteristics (ROC) curves for these features and regressions are presented. We conclude that simple regression analysis holds promise to further improve the separation of rare cells in cytometry applications. © 2017 International Society for Advancement of Cytometry. © 2017 International Society for Advancement of Cytometry.

Screws, Propellers and Fans Based on a Mobius Strip

NASA Technical Reports Server (NTRS)

Seiner, John M.; Backley, Floyd D.; Gilinsky, Mikhail

1998-01-01

A Mobius strip concept is intended for improving the working efficiency of propellers and screws. Applications involve cooling, boat propellers, mixing in appliance, blenders, and helicopters. Several Mobius shaped screws for the average size kitchen mixers have been made and tested. The tests have shown that the mixer with the Mobius shaped screw pair is most efficient, and saves more than 30% of the electric power by comparison with the standard. The created video film about these tests illustrates efficiency of Mobius shaped screws.

Comparison of NOx emissions from China III and China IV in-use diesel trucks based on on-road measurements

NASA Astrophysics Data System (ADS)

Yao, Zhiliang; Wu, Bobo; Wu, Yunong; Cao, Xinyue; Jiang, Xi

2015-12-01

To mitigate NOx and other emissions from diesel vehicles, China I, China II, China III and China IV emissions standards for new vehicles have been implemented nationwide. However, recent on-road measurements using a portable emission measurement system (PEMS) have revealed no significant reductions in the NOx emissions factors of diesel trucks due to the change from China II emissions standards to the more stringent China III standards. Thus, it is important to understand the effect of the China IV emissions standard on NOx emissions. In this study, nine China III and nine China IV diesel trucks of three sizes (light-duty diesel trucks (LDDTs), medium-duty diesel trucks (MDDTs) and heavy-duty diesel trucks (HDDTs)) were tested on real roads in Beijing using a PEMS. Compared to the tested China III diesel trucks, the China IV diesel trucks showed significant reductions of the average NOx emissions factors in terms of both distance travelled and fuel consumption. However, the driving conditions had an important impact on the reduction. Under non-highway driving (NHD), several of the tested China IV diesel trucks experienced no reduction or an increase in NOx emissions compared to their China III counterparts. The NOx emissions factors of the 18 tested diesel trucks under NHD were on average 1.5-times greater than those under highway driving (HD), and the effects on NOx emissions removal from China III to China IV diesel trucks were greater under HD than under NHD. In addition, no significant reduction of NOx based on fuel consumption for China IV diesel trucks was observed for MDDTs and HDDTs compared to the test results for similar China II vehicles reported in a previous study. To reduce NOx emissions in China, additional control measures of vehicular NOx emissions should be formulated.

Determination of longitudinal aerodynamic derivatives using flight data from an icing research aircraft

NASA Technical Reports Server (NTRS)

Ranaudo, R. J.; Batterson, J. G.; Reehorst, A. L.; Bond, T. H.; Omara, T. M.

1989-01-01

A flight test was performed with the NASA Lewis Research Center's DH-6 icing research aircraft. The purpose was to employ a flight test procedure and data analysis method, to determine the accuracy with which the effects of ice on aircraft stability and control could be measured. For simplicity, flight testing was restricted to the short period longitudinal mode. Two flights were flown in a clean (baseline) configuration, and two flights were flown with simulated horizontal tail ice. Forty-five repeat doublet maneuvers were performed in each of four test configurations, at a given trim speed, to determine the ensemble variation of the estimated stability and control derivatives. Additional maneuvers were also performed in each configuration, to determine the variation in the longitudinal derivative estimates over a wide range of trim speeds. Stability and control derivatives were estimated by a Modified Stepwise Regression (MSR) technique. A measure of the confidence in the derivative estimates was obtained by comparing the standard error for the ensemble of repeat maneuvers, to the average of the estimated standard errors predicted by the MSR program. A multiplicative relationship was determined between the ensemble standard error, and the averaged program standard errors. In addition, a 95 percent confidence interval analysis was performed for the elevator effectiveness estimates, C sub m sub delta e. This analysis identified the speed range where changes in C sub m sub delta e could be attributed to icing effects. The magnitude of icing effects on the derivative estimates were strongly dependent on flight speed and aircraft wing flap configuration. With wing flaps up, the estimated derivatives were degraded most at lower speeds corresponding to that configuration. With wing flaps extended to 10 degrees, the estimated derivatives were degraded most at the higher corresponding speeds. The effects of icing on the changes in longitudinal stability and control derivatives were adequately determined by the flight test procedure and the MSR analysis method discussed herein.

On-road heavy-duty diesel particulate matter emissions modeled using chassis dynamometer data.

PubMed

Kear, Tom; Niemeier, D A

2006-12-15

This study presents a model, derived from chassis dynamometer test data, for factors (operational correction factors, or OCFs) that correct (g/mi) heavy-duty diesel particle emission rates measured on standard test cycles for real-world conditions. Using a random effects mixed regression model with data from 531 tests of 34 heavy-duty vehicles from the Coordinating Research Council's E55/E59 research project, we specify a model with covariates that characterize high power transient driving, time spent idling, and average speed. Gram per mile particle emissions rates were negatively correlated with high power transient driving, average speed, and time idling. The new model is capable of predicting relative changes in g/mi on-road heavy-duty diesel particle emission rates for real-world driving conditions that are not reflected in the driving cycles used to test heavy-duty vehicles.

California State Motor Vehicle Pollution Control Standards; waiver of federal preemption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-11-24

The U.S. Environmental Protection Agency has granted California a waiver of federal preemption to enforce amendments to its exhaust emission standards and test procedures for new motor vehicles. The California amendments would require qualified small-volume vendor-dependent manufacturers to meet a nitrogen oxides (NO/sub x/) standard of 1.5 gpm for the 1980 and 1981 model years with both certification test vehicles and individual passenger car engine families and subgroups during production, and a NO/sub x/ standard of 1.0 gpm for the average of their entire combined passenger car production for a full calendar year for both model years. These requirements wouldmore » also apply to 1980 and 1981 model year light-duty trucks and medium-duty vehicles with equivalent inertia weight of 13; 4,000 lb. This EPA decision will also affect manufacturers outside California which must comply with that state's standards to be able to sell vehicles there.« less

Work Ethic and Academic Performance: Predicting Citizenship and Counterproductive Behavior

ERIC Educational Resources Information Center

Meriac, John P.

2012-01-01

In this study, work ethic was examined as a predictor of academic performance, compared with standardized test scores and high school grade point average (GPA). Academic performance was expanded to include student organizational citizenship behavior (OCB) and student counterproductive behavior, comprised of cheating and disengagement, in addition…

Sound and Unsound Options for Reform

ERIC Educational Resources Information Center

Finn, Chester E., Jr.

2004-01-01

Test results and employer complaints indicate that the average high school graduate hasn't learned enough and that he brings that deficit with him to college. As remedy, Chester Finn argues for uniform educational standards and measurements in a transparent reporting system that gives families the information necessary to scrutinize and accept or…

40 CFR 60.583 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) as follows: (1) Method 24 for analysis of inks. If nonphotochemically reactive solvents are used in the inks, standard gas chromatographic techniques may be used to identify and quantify these solvents... of an affected facility shall determine the weighted average VOC content of the inks according to the...

40 CFR 60.583 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) as follows: (1) Method 24 for analysis of inks. If nonphotochemically reactive solvents are used in the inks, standard gas chromatographic techniques may be used to identify and quantify these solvents... of an affected facility shall determine the weighted average VOC content of the inks according to the...

40 CFR 60.583 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) as follows: (1) Method 24 for analysis of inks. If nonphotochemically reactive solvents are used in the inks, standard gas chromatographic techniques may be used to identify and quantify these solvents... of an affected facility shall determine the weighted average VOC content of the inks according to the...

40 CFR 63.694 - Testing methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... material stream shall be collected from the container, pipeline, or other device used to deliver the off... off-site material streams at the point-of-delivery for compliance with standards specified § 63.683 of... determine the average VOHAP concentration for treated off-site material streams at the point-of-treatment...

40 CFR 63.490 - Batch front-end process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... temperature is 20 °C. Cj = Average inlet or outlet concentration of TOC or sample organic HAP component j of...) (kg/gm) (min/hr), where standard temperature is 20 °C. Cj = Inlet or outlet concentration of TOC or...

40 CFR 63.490 - Batch front-end process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... temperature is 20 °C. Cj = Average inlet or outlet concentration of TOC or sample organic HAP component j of...) (kg/gm) (min/hr), where standard temperature is 20 °C. Cj = Inlet or outlet concentration of TOC or...

40 CFR 63.490 - Batch front-end process vents-performance test methods and procedures to determine compliance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature is 20 °C. Cj = Average inlet or outlet concentration of TOC or sample organic HAP component j of...) (kg/gm) (min/hr), where standard temperature is 20 °C. Cj = Inlet or outlet concentration of TOC or...

A Study of Teacher Resilience in Urban Schools

ERIC Educational Resources Information Center

Patterson, Janice H.; Collins, Loucrecia; Abbott, Gypsy

2004-01-01

This paper describes a qualitative research study that investigated strategies used by urban teachers to build their personal resilience. Sixteen resilient teachers from four urban districts that reported student achievement equal to or higher than the state average on standard tests of reading and mathematics were interviewed. The definition of…

Music Achievement and Academic Achievement: Isolating the School as a Unit of Study

ERIC Educational Resources Information Center

Frey-Clark, Marta

2015-01-01

Music participation and academic achievement have long been of interest to educators, researchers and policy makers. The literature is replete with studies linking music participation to higher state assessment scores, grade point averages, and Standardized Achievement Test (SAT) scores. If students from quality music programs academically…

Conducting an Academic Audit

ERIC Educational Resources Information Center

Knowles, Paul D.

2010-01-01

Frustrated with years of below-average performance on standardized tests, high dropout rates and a negative image of its schools, the board of education in Maine School Administrative District 11, a 2,200-student school district in central Maine, charged a 15-member committee of educators, school board members and community representatives to…

The Relationship between Frustration Intolerance and Academic Achievement in College

ERIC Educational Resources Information Center

Wilde, Jerry

2012-01-01

Traditional measures of predicting academic achievement in college such as high school grades and standardized test scores account for approximately 25% of the difference between predicted and actual grade point average (GPA). Researchers have also examined the relationship between psychological factors and academic self-efficacy which may account…

Accelerated Change in Reading Instruction: The Arkansas Comprehensive School Reform Model.

ERIC Educational Resources Information Center

Balkman, Jami Ann

2001-01-01

Describes the Arkansas Comprehensive School Reform Model, which focuses on staff development and a collaborative support system for teaching reading in the elementary grades. Reports that preliminary results indicate an average increase of at least 20% on standardized testing scores for students in model classrooms. (NB)

Does competitive food and beverage legislation hurt meal participation or revenues in high schools?

PubMed

Peart, Tasha; Kao, Janice; Crawford, Patricia B; Samuels, Sarah E; Craypo, Lisa; Woodward-Lopez, Gail

2012-08-01

There is limited evidence to evaluate the influence of competitive food and beverage legislation on school meal program participation and revenues. A representative sample of 56 California high schools was recruited to collect school-level data before (2006–2007) and the year after (2007–2008) policies regarding limiting competitive foods and beverages were required to be implemented. Data were obtained from school records, observations, and questionnaires. Paired t-tests assessed significance of change between the two time points. Average participation in lunch increased from 21.7% to 25.3% (p < 0.001), representing a 17.0% increase, while average participation in breakfast increased from 8.9% to 10.3% (p = 0.02), representing a 16.0% increase. There was a significant (23.0%) increase in average meal revenue, from $0.70 to $0.86 (per student per day) (p < 0.001). There was a nonsignificant decrease (18.0%) in average sales from à la carte foods, from $0.45 to $0.37 (per student per day). Compliance with food and beverage standards also increased significantly. At end point, compliance with beverage standards was higher (71.0%) than compliance with food standards (65.7%). Competitive food and beverage legislation can increase food service revenues when accompanied by increased rates of participation in the meal program. Future studies collecting expense data will be needed to determine impact on net revenues.

Does previous healthcare experience increase success in physician assistant training?

PubMed

Hegmann, Theresa; Iverson, Katie

2016-06-01

Healthcare experience is used by many physician assistant (PA) programs to rank applicants. Despite a large healthcare literature base evaluating admissions factors, little information is available on the relationship of healthcare experience and educational outcomes. We aimed to test whether previous healthcare experience is associated with increased success during the clinical portion of the PA educational process. Hours of direct healthcare experience reported on Central Application Service for Physician Assistants applications for 124 students in the classes of 2009 through 2013 were associated with a calculated average preceptor evaluation score for each student and with average standardized-patient examination scores for a subset of students. Average student age was 28.7 years and median healthcare experience was 2,257 hours (range 390-16,400). Previous healthcare experience was not significantly correlated with preceptor evaluations or standardized-patient examination scores. This 5-year single institution pilot study did not support the hypothesis that healthcare experience is associated with improved clinical year outcomes.

Assessment issues in the testing of children at school entry.

PubMed

Rock, Donald A; Stenner, A Jackson

2005-01-01

The authors introduce readers to the research documenting racial and ethnic gaps in school readiness. They describe the key tests, including the Peabody Picture Vocabulary Test (PPVT), the Early Childhood Longitudinal Study (ECLS), and several intelligence tests, and describe how they have been administered to several important national samples of children. Next, the authors review the different estimates of the gaps and discuss how to interpret these differences. In interpreting test results, researchers use the statistical term "standard deviation" to compare scores across the tests. On average, the tests find a gap of about 1 standard deviation. The ECLS-K estimate is the lowest, about half a standard deviation. The PPVT estimate is the highest, sometimes more than 1 standard deviation. When researchers adjust those gaps statistically to take into account different outside factors that might affect children's test scores, such as family income or home environment, the gap narrows but does not disappear. Why such different estimates of the gap? The authors consider explanations such as differences in the samples, racial or ethnic bias in the tests, and whether the tests reflect different aspects of school "readiness," and conclude that none is likely to explain the varying estimates. Another possible explanation is the Spearman Hypothesis-that all tests are imperfect measures of a general ability construct, g; the more highly a given test correlates with g, the larger the gap will be. But the Spearman Hypothesis, too, leaves questions to be investigated. A gap of 1 standard deviation may not seem large, but the authors show clearly how it results in striking disparities in the performance of black and white students and why it should be of serious concern to policymakers.

The Assessment and Potential Implications of the Myocardial Performance Index Post Exercise in an at Risk Population.

PubMed

Ruisi, Michael; Levine, Michael; Finkielstein, Dennis

2013-12-01

The myocardial performance index (MPI) first described by Chuwa Tei in 1995 is a relatively new echocardiographic variable used for assessment of overall cardiac function. Previous studies have demonstrated the MPI to be a sum representation of both left ventricular systolic and diastolic function with prognostic value in patients with coronary artery disease as well as symptomatic heart failure. Ninety patients with either established coronary artery disease (CAD) or CAD risk factors underwent routine treadmill exercise stress testing with two-dimensional Doppler echocardiography using the standard Bruce protocol. Both resting and stress MPI values were measured for all 90 of the patients. Using a normal MPI cut off of ≤ 0.47, the prevalence of an abnormal resting MPI in our 90 subjects was 72/90 or 80% and the prevalence of an abnormal stress MPI in our 90 subjects was 48/90 or 53.33%. The average MPI observed in the resting portion of the stress test for the cohort was: 0.636 with a standard deviation of 0.182. The average MPI in the stress portion of the stress test for the cohort was 0.530 with a standard deviation of 0.250. The P value with the use of a one-tailed dependent T test was calculated to be < 0.05. We postulate that these findings reflect that the MPI (Tei) index assessed during exercise may be a sensitive indicator of occult coronary disease in an at risk group independent of wall motion assessment.

49 CFR 525.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.1 Scope. This part establishes... automobiles to exempt them from the average fuel economy standards for passenger automobiles and to establish alternative average fuel economy standards for those manufacturers. ...

49 CFR 525.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.1 Scope. This part establishes... automobiles to exempt them from the average fuel economy standards for passenger automobiles and to establish alternative average fuel economy standards for those manufacturers. ...

22st Annual National Test and Evaluation Conference

DTIC Science & Technology

2006-03-09

B1 B2 y ii) Factor B affects the standard deviation C2 C1 y iii) Factor C affects the average and the standard deviation D1 = D2 y iv) Factor D has...22303 UNITED STATES (P) (703)862-0908 (F) (703)970-5700 poole_grady@emc.com Mr. Josh Pressnell RTI 8306 Rugby Rd. Manassas, VA 20111...Ricciardi RTI 8306 Rugby Rd. Manassas, VA 20111-1912 UNITED STATES (P) (703)365-9662 (F) (703)365-9818 michael.ricciardi@rti-world.com Mr

A note on calculation of efficiency and emissions from wood and wood pellet stoves

NASA Astrophysics Data System (ADS)

Petrocelli, D.; Lezzi, A. M.

2015-11-01

In recent years, national laws and international regulations have introduced strict limits on efficiency and emissions from woody biomass appliances to promote the diffusion of models characterized by low emissions and high efficiency. The evaluation of efficiency and emissions is made during the certification process which consists in standardized tests. Standards prescribe the procedures to be followed during tests and the relations to be used to determine the mean value of efficiency and emissions. As a matter of fact these values are calculated using flue gas temperature and composition averaged over the whole test period, lasting from 1 to 6 hours. Typically, in wood appliances the fuel burning rate is not constant and this leads to a considerable variation in time of composition and flow rate of the flue gas. In this paper we show that this fact may cause significant differences between emission values calculated according to standards and those obtained integrating over the test period the instantaneous mass and energy balances. In addition, we propose some approximated relations and a method for wood stoves which supply more accurate results than those calculated according to standards. These relations can be easily implemented in a computer controlled data acquisition systems.

Development of a 100 nmol mol(-1) propane-in-air SRM for automobile-exhaust testing for new low-emission requirements.

PubMed

Rhoderick, George C

2007-04-01

New US federal low-level automobile emission requirements, for example zero-level-emission vehicle (ZLEV), for hydrocarbons and other species, have resulted in the need by manufacturers for new certified reference materials. The new emission requirement for hydrocarbons requires the use, by automobile manufacturing testing facilities, of a 100 nmol mol(-1) propane in air gas standard. Emission-measurement instruments are required, by federal law, to be calibrated with National Institute of Standards and Technology (NIST) traceable reference materials. Because a NIST standard reference material (SRM) containing 100 nmol mol(-1) propane was not available, the US Environmental Protection Agency (EPA) and the Automobile Industry/Government Emissions Research Consortium (AIGER) requested that NIST develop such an SRM. A cylinder lot of 30 gas mixtures containing 100 nmol mol(-1) propane in air was prepared in 6-L aluminium gas cylinders by a specialty gas company and delivered to the Gas Metrology Group at NIST. Another mixture, contained in a 30-L aluminium cylinder and included in the lot, was used as a lot standard (LS). Using gas chromatography with flame-ionization detection all 30 samples were compared to the LS to obtain the average of six peak-area ratios to the LS for each sample with standard deviations of <0.31%. The average sample-to-LS ratio determinations resulted in a range of 0.9828 to 0.9888, a spread of 0.0060, which corresponds to a relative standard deviation of 0.15% of the average for all 30 samples. NIST developed its first set of five propane in air primary gravimetric standards covering a concentration range 91 to 103 nmol mol(-1) with relative uncertainties of 0.15%. This new suite of propane gravimetric standards was used to analyze and assign a concentration value to the SRM LS. On the basis of these data each SRM sample was individually certified, furnishing the desired relative expanded uncertainty of +/-0.5%. Because automobile companies use total hydrocarbons to make their measurements, it was also vital to assign a methane concentration to the SRM samples. Some of the SRM samples were analyzed and found to contain 1.2 nmol mol(-1) methane. Twenty-five of the samples were certified and released as SRM 2765.

Coherent motion threshold measurements for M-cell deficit differ for above- and below-average readers.

PubMed

Solan, Harold A; Hansen, Peter C; Shelley-Tremblay, John; Ficarra, Anthony

2003-11-01

Research during the past 20 years has influenced the management of diagnosis and treatment of children identified as having learning-related vision problems. The intent of this study is to determine whether coherent motion threshold testing can distinguish better-than-average non-disabled (ND) readers from those who are moderately reading disabled (RD) among sixth-grade students. A sample of 23 better-than-average non-disabled readers (> or = 80th percentile) and 27 moderately disabled readers (< or = 32nd percentile) were identified using a standardized reading comprehension test. Each participant was tested for coherent motion threshold. Previous psychophysical and fMRI research with adults suggests that coherent motion threshold is a valid measure of magnocellular (M-cell) integrity. The average of two coherent motion threshold trials was significantly greater for moderately reading disabled subjects than for above-average readers (p < 0.01). The mean threshold percentage of dots required to observe lateral motion was 9.2% for moderately reading disabled readers and 4.6% for superior readers (p = 0.001). The outcome of this preliminary study provides an efficient procedure to identify sixth-grade students whose reading disability may be associated with an M-cell deficit. Our previous investigations involving visual processing, visual attention, and oculomotor therapy have resulted in significant improvements in reading comprehension, visual attention, and eye movements. It remains to be demonstrated whether vision therapy has an impact on the M-cell deficit, as measured with coherent motion threshold testing for moderately disabled readers.

Automation of testing modules of controller ELSY-ТМК

NASA Astrophysics Data System (ADS)

Dolotov, A. E.; Dolotova, R. G.; Petuhov, D. V.; Potapova, A. P.

2017-01-01

In modern life, there are means for automation of various processes which allow one to provide high quality standards of released products and to raise labour efficiency. In the given paper, the data on the automation of the test process of the ELSY-TMK controller [1] is presented. The ELSY-TMK programmed logic controller is an effective modular platform for construction of automation systems for small and average branches of industrial production. The modern and functional standard of communication and open environment of the logic controller give a powerful tool of wide spectrum applications for industrial automation. The algorithm allows one to test controller modules by operating the switching system and external devices faster and at a higher level of quality than a human without such means does.

The woodcock reading mastery test: impact of normative changes.

PubMed

Pae, Hye Kyeong; Wise, Justin C; Cirino, Paul T; Sevcik, Rose A; Lovett, Maureen W; Wolf, Maryanne; Morris, Robin D

2005-09-01

This study examined the magnitude of differences in standard scores, convergent validity, and concurrent validity when an individual's performance was gauged using the revised and the normative update (Woodcock, 1998) editions of the Woodcock Reading Mastery Test in which the actual test items remained identical but norms have been updated. From three metropolitan areas, 899 first to third grade students referred by their teachers for a reading intervention program participated. Results showed the inverse Flynn effect, indicating systematic inflation averaging 5 to 9 standard score points, regardless of gender, IQ, city site, or ethnicity, when calculated using the updated norms. Inflation was greater at lower raw score levels. Implications for using the updated norms for identifying children with reading disabilities and changing norms during an ongoing study are discussed.

Testing the Capacity of a Multi-Nutrient Profiling System to Guide Food and Beverage Reformulation: Results from Five National Food Composition Databases.

PubMed

Combet, Emilie; Vlassopoulos, Antonis; Mölenberg, Famke; Gressier, Mathilde; Privet, Lisa; Wratten, Craig; Sharif, Sahar; Vieux, Florent; Lehmann, Undine; Masset, Gabriel

2017-04-21

Nutrient profiling ranks foods based on their nutrient composition, with applications in multiple aspects of food policy. We tested the capacity of a category-specific model developed for product reformulation to improve the average nutrient content of foods, using five national food composition datasets (UK, US, China, Brazil, France). Products ( n = 7183) were split into 35 categories based on the Nestlé Nutritional Profiling Systems (NNPS) and were then classified as NNPS 'Pass' if all nutrient targets were met (energy (E), total fat (TF), saturated fat (SFA), sodium (Na), added sugars (AS), protein, calcium). In a modelling scenario, all NNPS Fail products were 'reformulated' to meet NNPS standards. Overall, a third (36%) of all products achieved the NNPS standard/pass (inter-country and inter-category range: 32%-40%; 5%-72%, respectively), with most products requiring reformulation in two or more nutrients. The most common nutrients to require reformulation were SFA (22%-44%) and TF (23%-42%). Modelled compliance with NNPS standards could reduce the average content of SFA, Na and AS (10%, 8% and 6%, respectively) at the food supply level. Despite the good potential to stimulate reformulation across the five countries, the study highlights the need for better data quality and granularity of food composition databases.

Evaluation of standard and modified M-FC, MacConkey, and Teepol media for membrane filtration counting of fecal coliforms in water.

PubMed

Grabow, W O; Hilner, C A; Coubrough, P

1981-08-01

MacConkey agar, standard M-FC agar, M-FC agar without rosolic acid, M-FC agar with a resuscitation top layer, Teepol agar, and pads saturated with Teepol broth, were evaluated as growth media for membrane filtration counting of fecal coliform bacteria in water. In comparative tests on 312 samples of water from a wide variety of sources, including chlorinated effluents, M-FC agar without rosolic acid proved the medium of choice because it generally yielded the highest counts, was readily obtainable, easy to prepare and handle, and yielded clearly recognizable fecal coliform colonies. Identification of 1,139 fecal coliform isolates showed that fecal coliform tests cannot be used to enumerate Escherichia coli because the incidence of E. coli among fecal coliforms varied from an average of 51% for river water to 93% for an activated sludge effluent after chlorination. The incidence of Klebsiella pneumoniae among fecal coliforms varied from an average of 4% for the activated sludge effluent after chlorination to 32% for the river water. The advantages of a standard membrane filtration procedure for routine counting of fecal coliforms in water using M-FC agar without rosolic acid as growth medium, in the absence of preincubation or resuscitation steps, are outlined.

PV industry growth and module reliability in Thailand

NASA Astrophysics Data System (ADS)

Chenvidhya, Dhirayut; Seapan, Manit; Sangpongsanont, Yaowanee; Chenvidhya, Tanokkorn; Limsakul, Chamnan; Songprakorp, Roongrojana

2015-09-01

The PV applications in Thailand are now installed more than 1.2 GWp cumulatively. It is due to the National Renewable Energy Program and its targets. In the latest Alternative Energy Development Plan (AEDP), the PV electricity production target has increased from 2 GWp to 3 GWp. With this rapid growth, customers and manufacturers seek for module standard testing. So far over one thousands of PV modules per annum have been tested since 2012. The normal tests include type approval test according to TIS standard, acceptance test and testing for local standard development. For type test, the most module failure was found during damp heat test. For annual evaluation test, the power degradation and delamination of power was found between 0 to 6 percent from its nameplate after deployment of 0 to 5 years in the field. For thin-film module, the degradation and delamination was found in range of 0 to 13 percent (about 5 percent on average) from its nameplate for the modules in operation with less than 5 years. However, for the PV modules at the reference site on campus operated for 12 years, the power degradation was ranging from 10 to 15 percent. Therefore, a long term performance assessment needs to be considered to ensure the system reliability.

49 CFR 525.2 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.2 Purpose. The purpose of this... automobiles which desire to petition the Administrator for exemption from applicable average fuel economy standards and for establishment of appropriate alternative average fuel economy standards and to give...

49 CFR 525.2 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.2 Purpose. The purpose of this... automobiles which desire to petition the Administrator for exemption from applicable average fuel economy standards and for establishment of appropriate alternative average fuel economy standards and to give...

Detection of small earthquakes with dense array data: example from the San Jacinto fault zone, southern California

NASA Astrophysics Data System (ADS)

Meng, Haoran; Ben-Zion, Yehuda

2018-01-01

We present a technique to detect small earthquakes not included in standard catalogues using data from a dense seismic array. The technique is illustrated with continuous waveforms recorded in a test day by 1108 vertical geophones in a tight array on the San Jacinto fault zone. Waveforms are first stacked without time-shift in nine non-overlapping subarrays to increase the signal-to-noise ratio. The nine envelope functions of the stacked records are then multiplied with each other to suppress signals associated with sources affecting only some of the nine subarrays. Running a short-term moving average/long-term moving average (STA/LTA) detection algorithm on the product leads to 723 triggers in the test day. Using a local P-wave velocity model derived for the surface layer from Betsy gunshot data, 5 s long waveforms of all sensors around each STA/LTA trigger are beamformed for various incident directions. Of the 723 triggers, 220 are found to have localized energy sources and 103 of these are confirmed as earthquakes by verifying their observation at 4 or more stations of the regional seismic network. This demonstrates the general validity of the method and allows processing further the validated events using standard techniques. The number of validated events in the test day is >5 times larger than that in the standard catalogue. Using these events as templates can lead to additional detections of many more earthquakes.

From Bolam-Bolitho to Modified-Montgomery - A Paradigm Shift in the Legal Standard of Determining Medical Negligence in Singapore.

PubMed

Neo, Han Yee

2017-09-01

In a recent landmark litigation, the Singapore Court of Appeal introduced a new legal standard for determining medical negligence with regards to information disclosure - the Modified-Montgomery test. This new test fundamentally shifts the legal position concerning the standard of care expected of a doctor when he dispenses medical advice. Previously, a doctor is expected to disclose what a "reasonable physician" would tell his patient. Now, a doctor must disclose "all material risks" that a "reasonable patient" would want to know under his unique circumstances. Patient-centred communication is no longer an aspirational ideal but has become a legal mandate. Manpower, administrative, logistic and medical educational reforms should start now, so as to support the average physician transit from the era of the Bolam-Bolitho, to that of the Modified-Montgomery.

Multiple-taper spectral analysis: A stand-alone C-subroutine

NASA Astrophysics Data System (ADS)

Lees, Jonathan M.; Park, Jeffrey

1995-03-01

A simple set of subroutines in ANSI-C are presented for multiple taper spectrum estimation. The multitaper approach provides an optimal spectrum estimate by minimizing spectral leakage while reducing the variance of the estimate by averaging orthogonal eigenspectrum estimates. The orthogonal tapers are Slepian nπ prolate functions used as tapers on the windowed time series. Because the taper functions are orthogonal, combining them to achieve an average spectrum does not introduce spurious correlations as standard smoothed single-taper estimates do. Furthermore, estimates of the degrees of freedom and F-test values at each frequency provide diagnostics for determining levels of confidence in narrow band (single frequency) periodicities. The program provided is portable and has been tested on both Unix and Macintosh systems.

Can teachers' global ratings identify children with academic problems?

PubMed

Glascoe, F P

2001-06-01

Physicians often elicit ratings from teachers when making diagnostic, treatment, or referral decisions. The purpose of this study was to view the relationship between teachers' ratings and children's academic skills, assess the utility of teacher ratings in detecting academic problems, and thus determine whether physicians can depend on teacher ratings when making decisions about patients' needs. Subjects were a national sample of 80 teachers and 934 children between 6 and 13 years of age participating in a test standardization study. Families were representative of United States demographics in terms of parental level of education, income, and ethnicity, and sites were geographically diverse elementary schools. Children were administered the Comprehensive Inventory of Basic Skills--Revised (CIBS-R), a diagnostic academic achievement test. Teachers rated children's academic performance on a five-point scale ranging from far above average to far below average and were blinded to the results of the CIBS-R. Teacher ratings varied significantly with children's performance for all academic domains. Logistic regression revealed that teacher ratings were best predicted by children's performance in basic reading skills, followed by math skills, and were not influenced by race, parents' level of education, history of retention, or gender. Participation in Title I services, testing in winter or spring, and parents who spoke a language other than English produced significantly lower ratings. Nevertheless, teachers rated as average many students with mild to moderate academic difficulties. School system personnel and health care providers should avoid sole dependence on global teacher ratings when deciding which students need special education referrals or other services. Supplementing teacher ratings with standardized screening test results is needed to ensure accurate decision-making.

A School Voucher Program for Baltimore City

ERIC Educational Resources Information Center

Lips, Dan

2005-01-01

Baltimore City's public school system is in crisis. Academically, the school system fails on any number of measures. The city's graduation rate is barely above 50 percent and students continually lag well behind state averages on standardized tests. Adding to these problems is the school system's current fiscal crisis, created by years of fiscal…

An Empirical Investigation of Change in MCAT Scores upon Retest.

ERIC Educational Resources Information Center

Hynes, Kevin; Givner, Nathaniel

1980-01-01

An investigation of Medical College Admission Test (MCAT) retest scores indicates that limited retest improvement may result when initial scores are fairly low or below what might be predicted based on grade point averages. However, when initial scores approach the national, standardized MCAT mean, or are above what might be predicted, significant…

Program of Vocational Rehabilitation for Young Adult Offenders.

ERIC Educational Resources Information Center

Pennsylvania State Correctional Inst., Camp Hill.

Full development of the educational, occupational, and attitudinal abilities of young delinquents admitted to the Camp Hill State Correctional Institute was the object of this Elementary and Secondary Education Act Title I Program. Young adults 15-21 years committed to Camp Hill average 6.1 on the standard educational battery test and their…

Predictors of White and Minority Student Success at a Private Women's College

ERIC Educational Resources Information Center

Kirby, Elizabeth; White, Samantha; Aruguete, Mara

2007-01-01

This study examines predictors of academic success in a private women's college. We investigated academic factors (e.g., high school grade point average, standardized test scores) and socioeconomic status (e.g., parents' occupation, need for financial aid) as possible predictors of academic success among White and non-White students. Data was…

40 CFR 86.1728-99 - Compliance with emission standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... part to test for irregular data from a durability-data set. If any data point is identified as a... apply both the outlier procedure and averaging to the same data set, the outlier procedure shall be... shall be determined from the exhaust emission results of the durability-data vehicle(s) for each engine...

40 CFR 86.1728-99 - Compliance with emission standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... part to test for irregular data from a durability-data set. If any data point is identified as a... apply both the outlier procedure and averaging to the same data set, the outlier procedure shall be... shall be determined from the exhaust emission results of the durability-data vehicle(s) for each engine...

40 CFR 86.1728-99 - Compliance with emission standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... part to test for irregular data from a durability-data set. If any data point is identified as a... apply both the outlier procedure and averaging to the same data set, the outlier procedure shall be... shall be determined from the exhaust emission results of the durability-data vehicle(s) for each engine...

On the Factorial Structure of the SAT and Implications for Next-Generation College Readiness Assessments

ERIC Educational Resources Information Center

Wiley, Edward W.; Shavelson, Richard J.; Kurpius, Amy A.

2014-01-01

The name "SAT" has become synonymous with college admissions testing; it has been dubbed "the gold standard." Numerous studies on its reliability and predictive validity show that the SAT predicts college performance beyond high school grade point average. Surprisingly, studies of the factorial structure of the current version…

Multilingual Literacies: Invisible Representation of Literacy in a Rural Classroom

ERIC Educational Resources Information Center

Kiramba, Lydiah Kananu

2017-01-01

In many countries, educational policies typically mandate school activities that promote a homogeneous and narrow range of academic literacies for all learners despite the diverse nature of human learning. This ethnographic case study examines how a 12-year-old Kenyan fourth-grade student performing below average on all standardized tests used…

Create Success! Unlocking the Potential of Urban Students

ERIC Educational Resources Information Center

Rajagopal, Kadhir

2011-01-01

Inspired by his ability to teach algebra to low-income and mostly African American and Latino urban students--and have them outscore the state averages for high-income and Caucasian students on standardized tests--Kadhir "Raja" Rajagopal, the 2011 California Teacher of the Year, provides you with a model for teaching that unleashes the…

Measuring Teacher Effectiveness with the Pennsylvania Value-Added Assessment System

ERIC Educational Resources Information Center

Bowen, Naomi

2017-01-01

The purpose of this research was to determine if the Pennsylvania Value-Added Assessment System Average Growth Index (PVAAS AGI) scores, derived from standardized tests and calculated for Pennsylvania schools, provide a valid and reliable assessment of teacher effectiveness, as these scores are currently used to derive 15% of the annual…

The Treatment Effect of Grade Repetitions

ERIC Educational Resources Information Center

Mahjoub, Mohamed-Badrane

2017-01-01

This paper estimates the treatment effect of grade repetitions in French junior high schools, using a value-added test score as outcome and quarter of birth as instrument. With linear two-stage least squares, local average treatment effect is estimated at around 1.6 times the standard deviation of the achievement gain. With non-linear…

Integrity of Disposable Nitrile Exam Gloves Exposed to Simulated Movement

PubMed Central

Phalen, Robert N.; Wong, Weng Kee

2011-01-01

Every year, millions of health care, first responder, and industry workers are exposed to chemical and biological hazards. Disposable nitrile gloves are a common choice as both a chemical and physical barrier to these hazards, especially as an alternative to natural latex gloves. However, glove selection is complicated by the availability of several types or formulations of nitrile gloves, such as low-modulus, medical-grade, low-filler, and cleanroom products. This study evaluated the influence of simulated movement on the physical integrity (i.e., holes) of different nitrile exam glove brands and types. Thirty glove products were evaluated out-of-box and after exposure to simulated whole-glove movement for 2 hr. In lieu of the traditional 1-L water-leak test, a modified water-leak test, standardized to detect a 0.15 ± 0.05 mm hole in different regions of the glove, was developed. A specialized air inflation method simulated bidirectional stretching and whole-glove movement. A worst-case scenario with maximum stretching was evaluated. On average, movement did not have a significant effect on glove integrity (chi-square; p=0.068). The average effect was less than 1% between no movement (1.5%) and movement (2.1%) exposures. However, there was significant variability in glove integrity between different glove types (p ≤ 0.05). Cleanroom gloves, on average, had the highest percentage of leaks, and 50% failed the water-leak test. Low-modulus and medical-grade gloves had the lowest percentages of leaks, and no products failed the water-leak test. Variability in polymer formulation was suspected to account for the observed discrepancies, as well as the inability of the traditional 1-L water-leak test to detect holes in finger/thumb regions. Unexpectedly, greater than 80% of the glove defects were observed in the finger and thumb regions. It is recommended that existing water-leak tests be re-evaluated and standardized to account for product variability. PMID:21476169

Intraoperative Cochlear Implant Device Testing Utilizing an Automated Remote System: A Prospective Pilot Study.

PubMed

Lohmann, Amanda R; Carlson, Matthew L; Sladen, Douglas P

2018-03-01

Intraoperative cochlear implant device testing provides valuable information regarding device integrity, electrode position, and may assist with determining initial stimulation settings. Manual intraoperative device testing during cochlear implantation requires the time and expertise of a trained audiologist. The purpose of the current study is to investigate the feasibility of using automated remote intraoperative cochlear implant reverse telemetry testing as an alternative to standard testing. Prospective pilot study evaluating intraoperative remote automated impedance and Automatic Neural Response Telemetry (AutoNRT) testing in 34 consecutive cochlear implant surgeries using the Intraoperative Remote Assistant (Cochlear Nucleus CR120). In all cases, remote intraoperative device testing was performed by trained operating room staff. A comparison was made to the "gold standard" of manual testing by an experienced cochlear implant audiologist. Electrode position and absence of tip fold-over was confirmed using plain film x-ray. Automated remote reverse telemetry testing was successfully completed in all patients. Intraoperative x-ray demonstrated normal electrode position without tip fold-over. Average impedance values were significantly higher using standard testing versus CR120 remote testing (standard mean 10.7 kΩ, SD 1.2 vs. CR120 mean 7.5 kΩ, SD 0.7, p < 0.001). There was strong agreement between standard manual testing and remote automated testing with regard to the presence of open or short circuits along the array. There were, however, two cases in which standard testing identified an open circuit, when CR120 testing showed the circuit to be closed. Neural responses were successfully obtained in all patients using both systems. There was no difference in basal electrode responses (standard mean 195.0 μV, SD 14.10 vs. CR120 194.5 μV, SD 14.23; p = 0.7814); however, more favorable (lower μV amplitude) results were obtained with the remote automated system in the apical 10 electrodes (standard 185.4 μV, SD 11.69 vs. CR120 177.0 μV, SD 11.57; p value < 0.001). These preliminary data demonstrate that intraoperative cochlear implant device testing using a remote automated system is feasible. This system may be useful for cochlear implant programs with limited audiology support or for programs looking to streamline intraoperative device testing protocols. Future studies with larger patient enrollment are required to validate these promising, but preliminary, findings.

Rapid diagnostic tests for diagnosing uncomplicated non-falciparum or Plasmodium vivax malaria in endemic countries.

PubMed

Abba, Katharine; Kirkham, Amanda J; Olliaro, Piero L; Deeks, Jonathan J; Donegan, Sarah; Garner, Paul; Takwoingi, Yemisi

2014-12-18

In settings where both Plasmodium vivax and Plasmodium falciparum infection cause malaria, rapid diagnostic tests (RDTs) need to distinguish which species is causing the patients' symptoms, as different treatments are required. Older RDTs incorporated two test lines to distinguish malaria due to P. falciparum, from malaria due to any other Plasmodium species (non-falciparum). These RDTs can be classified according to which antibodies they use: Type 2 RDTs use HRP-2 (for P. falciparum) and aldolase (all species); Type 3 RDTs use HRP-2 (for P. falciparum) and pLDH (all species); Type 4 use pLDH (fromP. falciparum) and pLDH (all species).More recently, RDTs have been developed to distinguish P. vivax parasitaemia by utilizing a pLDH antibody specific to P. vivax. To assess the diagnostic accuracy of RDTs for detecting non-falciparum or P. vivax parasitaemia in people living in malaria-endemic areas who present to ambulatory healthcare facilities with symptoms suggestive of malaria, and to identify which types and brands of commercial test best detect non-falciparum and P. vivax malaria. We undertook a comprehensive search of the following databases up to 31 December 2013: Cochrane Infectious Diseases Group Specialized Register; MEDLINE; EMBASE; MEDION; Science Citation Index; Web of Knowledge; African Index Medicus; LILACS; and IndMED. Studies comparing RDTs with a reference standard (microscopy or polymerase chain reaction) in blood samples from a random or consecutive series of patients attending ambulatory health facilities with symptoms suggestive of malaria in non-falciparum endemic areas. For each study, two review authors independently extracted a standard set of data using a tailored data extraction form. We grouped comparisons by type of RDT (defined by the combinations of antibodies used), and combined in meta-analysis where appropriate. Average sensitivities and specificities are presented alongside 95% confidence intervals (95% CI). We included 47 studies enrolling 22,862 participants. Patient characteristics, sampling methods and reference standard methods were poorly reported in most studies. RDTs detecting 'non-falciparum' parasitaemiaEleven studies evaluated Type 2 tests compared with microscopy, 25 evaluated Type 3 tests, and 11 evaluated Type 4 tests. In meta-analyses, average sensitivities and specificities were 78% (95% CI 73% to 82%) and 99% (95% CI 97% to 99%) for Type 2 tests, 78% (95% CI 69% to 84%) and 99% (95% CI 98% to 99%) for Type 3 tests, and 89% (95% CI 79% to 95%) and 98% (95% CI 97% to 99%) for Type 4 tests, respectively. Type 4 tests were more sensitive than both Type 2 (P = 0.01) and Type 3 tests (P = 0.03).Five studies compared Type 3 tests with PCR; in meta-analysis, the average sensitivity and specificity were 81% (95% CI 72% to 88%) and 99% (95% CI 97% to 99%) respectively. RDTs detecting P.vivax parasitaemiaEight studies compared pLDH tests to microscopy; the average sensitivity and specificity were 95% (95% CI 86% to 99%) and 99% (95% CI 99% to 100%), respectively. RDTs designed to detect P. vivax specifically, whether alone or as part of a mixed infection, appear to be more accurate than older tests designed to distinguish P. falciparum malaria from non-falciparum malaria. Compared to microscopy, these tests fail to detect around 5% ofP. vivax cases. This Cochrane Review, in combination with other published information about in vitro test performance and stability in the field, can assist policy-makers to choose between the available RDTs.

41 CFR 102-34.55 - Are there fleet average fuel economy standards we must meet?

Code of Federal Regulations, 2011 CFR

2011-01-01

... fuel economy standards we must meet? 102-34.55 Section 102-34.55 Public Contracts and Property... average fuel economy standards we must meet? (a) Yes. 49 U.S.C. 32917 and Executive Order 12375 require that each executive agency meet the fleet average fuel economy standards in place as of January 1 of...

41 CFR 102-34.55 - Are there fleet average fuel economy standards we must meet?

Code of Federal Regulations, 2014 CFR

2014-01-01

... fuel economy standards we must meet? 102-34.55 Section 102-34.55 Public Contracts and Property... average fuel economy standards we must meet? (a) Yes. 49 U.S.C. 32917 and Executive Order 12375 require that each executive agency meet the fleet average fuel economy standards in place as of January 1 of...

41 CFR 102-34.55 - Are there fleet average fuel economy standards we must meet?

Code of Federal Regulations, 2012 CFR

2012-01-01

... fuel economy standards we must meet? 102-34.55 Section 102-34.55 Public Contracts and Property... average fuel economy standards we must meet? (a) Yes. 49 U.S.C. 32917 and Executive Order 12375 require that each executive agency meet the fleet average fuel economy standards in place as of January 1 of...

41 CFR 102-34.55 - Are there fleet average fuel economy standards we must meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

... fuel economy standards we must meet? 102-34.55 Section 102-34.55 Public Contracts and Property... average fuel economy standards we must meet? (a) Yes. 49 U.S.C. 32917 and Executive Order 12375 require that each executive agency meet the fleet average fuel economy standards in place as of January 1 of...

Clinical competency evaluation of Brazilian chiropractic interns

PubMed Central

Facchinato, Ana Paula A.; Benedicto, Camila C.; Mora, Aline G.; Cabral, Dayane M.C.; Fagundes, Djalma J.

2015-01-01

Objective This study compares the results of an objective structured clinical examination (OSCE) between 2 groups of students before an internship and after 6 months of clinical practice in an internship. Methods Seventy-two students participated, with 36 students in each cohort. The OSCEs were performed in the simulation laboratory before the participants' clinical practice internship and after 6 months of the internship. Students were tested in 9 stations for clinical skills and knowledge. The same procedures were repeated for both cohorts. The t test was used for unpaired parametric samples and Fisher's exact test was used for comparison of proportions. Results There was no difference in the mean final score between the 2 groups (p = .34 for test 1; p = .08 for test 2). The performance of the students in group 1 was not significantly different when performed before and after 6 months of clinical practice, but in group 2 there was a significant decrease in the average score after 6 months of clinical practice. Conclusions There was no difference in the cumulative average score for the 2 groups before and after 6 months of clinical practice in the internship. There were differences within the cohorts, however, with a significant decrease in the average score in group 2. Issues pertaining to test standardization and student motivation for test 2 may have influenced the scores. PMID:25588200

What factors are associated with good performance in children with cochlear implants? From the outcome of various language development tests, research on sensory and communicative disorders project in Japan: nagasaki experience.

PubMed

Kanda, Yukihiko; Kumagami, Hidetaka; Hara, Minoru; Sainoo, Yuzuru; Sato, Chisei; Yamamoto-Fukuda, Tomomi; Yoshida, Haruo; Ito, Akiko; Tanaka, Chiharu; Baba, Kyoko; Nakata, Ayaka; Tanaka, Hideo; Fukushima, Kunihiro; Kasai, Norio; Takahashi, Haruo

2012-04-01

We conducted multi-directional language development tests as a part of the Research on Sensory and Communicative Disorders (RSVD) in Japan. This report discusses findings as well as factors that led to better results in children with severe-profound hearing loss. We evaluated multiple language development tests in 33 Japanese children with cochlear implants (32 patients) and hearing aid (1 patient), including 1) Test for question and answer interaction development, 2) Word fluency test, 3) Japanese version of the Peabody picture vocabulary test-revised, 4) The standardized comprehension test of abstract words, 5) The screening test of reading and writing for Japanese primary school children, 6) The syntactic processing test of aphasia, 7) Criterion-referenced testing (CRT) for Japanese language and mathematics, 8) Pervasive development disorders ASJ rating scales, and 9) Raven's colored progressive matrices. Furthermore, we investigated the factors believed to account for the better performances in these tests. The first group, group A, consisted of 14 children with higher scores in all tests than the national average for children with hearing difficulty. The second group, group B, included 19 children that scored below the national average in any of the tests. Overall, the results show that 76.2% of the scores obtained by the children in these tests exceeded the national average scores of children with hearing difficulty. The children who finished above average on all tests had undergone a longer period of regular habilitation in our rehabilitation center, had their implants earlier in life, were exposed to more auditory verbal/oral communication in their education at affiliated institutions, and were more likely to have been integrated in a regular kindergarten before moving on to elementary school. In this study, we suggest that taking the above four factors into consideration will have an affect on the language development of children with severe-profound hearing loss.

40 CFR 86.1710-99 - Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Fleet average non-methane organic gas....1710-99 Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and... follows: Table R99-15—Fleet Average Non-Methane Organic Gas Standards (g/mi) for Light-Duty Vehicles and...

40 CFR 86.1710-99 - Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Fleet average non-methane organic gas....1710-99 Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and... follows: Table R99-15—Fleet Average Non-Methane Organic Gas Standards (g/mi) for Light-Duty Vehicles and...

40 CFR 86.1710-99 - Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Fleet average non-methane organic gas....1710-99 Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and... follows: Table R99-15—Fleet Average Non-Methane Organic Gas Standards (g/mi) for Light-Duty Vehicles and...

40 CFR 86.1710-99 - Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Fleet average non-methane organic gas....1710-99 Fleet average non-methane organic gas exhaust emission standards for light-duty vehicles and... follows: Table R99-15—Fleet Average Non-Methane Organic Gas Standards (g/mi) for Light-Duty Vehicles and...

49 CFR 531.5 - Fuel economy standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS § 531.5 Fuel... automobiles shall comply with the fleet average fuel economy standards in Table I, expressed in miles per... passenger automobile fleet shall comply with the fleet average fuel economy level calculated for that model...

49 CFR 531.5 - Fuel economy standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS § 531.5 Fuel... automobiles shall comply with the fleet average fuel economy standards in Table I, expressed in miles per... passenger automobile fleet shall comply with the fleet average fuel economy level calculated for that model...

Improving Arterial Spin Labeling by Using Deep Learning.

PubMed

Kim, Ki Hwan; Choi, Seung Hong; Park, Sung-Hong

2018-05-01

Purpose To develop a deep learning algorithm that generates arterial spin labeling (ASL) perfusion images with higher accuracy and robustness by using a smaller number of subtraction images. Materials and Methods For ASL image generation from pair-wise subtraction, we used a convolutional neural network (CNN) as a deep learning algorithm. The ground truth perfusion images were generated by averaging six or seven pairwise subtraction images acquired with (a) conventional pseudocontinuous arterial spin labeling from seven healthy subjects or (b) Hadamard-encoded pseudocontinuous ASL from 114 patients with various diseases. CNNs were trained to generate perfusion images from a smaller number (two or three) of subtraction images and evaluated by means of cross-validation. CNNs from the patient data sets were also tested on 26 separate stroke data sets. CNNs were compared with the conventional averaging method in terms of mean square error and radiologic score by using a paired t test and/or Wilcoxon signed-rank test. Results Mean square errors were approximately 40% lower than those of the conventional averaging method for the cross-validation with the healthy subjects and patients and the separate test with the patients who had experienced a stroke (P < .001). Region-of-interest analysis in stroke regions showed that cerebral blood flow maps from CNN (mean ± standard deviation, 19.7 mL per 100 g/min ± 9.7) had smaller mean square errors than those determined with the conventional averaging method (43.2 ± 29.8) (P < .001). Radiologic scoring demonstrated that CNNs suppressed noise and motion and/or segmentation artifacts better than the conventional averaging method did (P < .001). Conclusion CNNs provided superior perfusion image quality and more accurate perfusion measurement compared with those of the conventional averaging method for generation of ASL images from pair-wise subtraction images. © RSNA, 2017.

Does standard deviation matter? Using "standard deviation" to quantify security of multistage testing.

PubMed

Wang, Chun; Zheng, Yi; Chang, Hua-Hua

2014-01-01

With the advent of web-based technology, online testing is becoming a mainstream mode in large-scale educational assessments. Most online tests are administered continuously in a testing window, which may post test security problems because examinees who take the test earlier may share information with those who take the test later. Researchers have proposed various statistical indices to assess the test security, and one most often used index is the average test-overlap rate, which was further generalized to the item pooling index (Chang & Zhang, 2002, 2003). These indices, however, are all defined as the means (that is, the expected proportion of common items among examinees) and they were originally proposed for computerized adaptive testing (CAT). Recently, multistage testing (MST) has become a popular alternative to CAT. The unique features of MST make it important to report not only the mean, but also the standard deviation (SD) of test overlap rate, as we advocate in this paper. The standard deviation of test overlap rate adds important information to the test security profile, because for the same mean, a large SD reflects that certain groups of examinees share more common items than other groups. In this study, we analytically derived the lower bounds of the SD under MST, with the results under CAT as a benchmark. It is shown that when the mean overlap rate is the same between MST and CAT, the SD of test overlap tends to be larger in MST. A simulation study was conducted to provide empirical evidence. We also compared the security of MST under the single-pool versus the multiple-pool designs; both analytical and simulation studies show that the non-overlapping multiple-pool design will slightly increase the security risk.

Is There a Difference in Cost Between Standard and Virtual Surgical Planning for Orthognathic Surgery?

PubMed

Resnick, Cory M; Inverso, Gino; Wrzosek, Mariusz; Padwa, Bonnie L; Kaban, Leonard B; Peacock, Zachary S

2016-09-01

Virtual surgical planning (VSP) and 3-dimensional printing of surgical splints are becoming the standard of care for orthognathic surgery, but costs have not been thoroughly evaluated. The purpose of this study was to compare the cost of VSP and 3-dimensional printing of splints ("VSP") versus that of 2-dimensional cephalometric evaluation, model surgery, and manual splint fabrication ("standard planning"). This is a retrospective cohort study including patients planned for bimaxillary surgery from January 2014 to January 2015 at Massachusetts General Hospital. Patients were divided into 3 groups by case type: symmetric, nonsegmental (group 1); asymmetric (group 2); and segmental (group 3). All cases underwent both VSP and standard planning with times for all activities recorded. The primary and secondary predictor variables were method of treatment planning and case type, respectively. Time-driven activity-based micro-costing analysis was used to quantify the differences in cost. Results were analyzed using a paired t test and analysis of variance. The sample included 43 patients (19 in group 1, 17 in group 2, and 7 in group 3). The average times and costs were 194 ± 14.1 minutes and $2,765.94, respectively, for VSP and 540.9 ± 99.5 minutes and $3,519.18, respectively, for standard planning. For the symmetric, nonsegmental group, the average times and costs were 188 ± 17.8 minutes and $2,700.52, respectively, for VSP and 524.4 ± 86.1 minutes and $3,380.17, respectively, for standard planning. For the asymmetric group, the average times and costs were 187.4 ± 10.9 minutes and $2,713.69, respectively, for VSP and 556.1 ± 94.1 minutes and $3,640.00, respectively, for standard planning. For the segmental group, the average times and costs were 208.8 ± 13.5 minutes and $2,883.62, respectively, for VSP and 542.3 ± 118.4 minutes and $3,537.37, respectively, for standard planning. All time and cost differences were statistically significant (P < .001). The results of this study indicate that VSP for bimaxillary orthognathic surgery takes significantly less time and is less expensive than standard planning for the 3 types of cases analyzed. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

In-Plume Emission Test Stand 2: emission factors for 10- to 100-kW U.S. military generators.

PubMed

Zhu, Dongzi; Nussbaum, Nicholas J; Kuhns, Hampden D; Chang, M-C Oliver; Sodeman, David; Uppapalli, Sebastian; Moosmüller, Hans; Chow, Judith C; Watson, John G

2009-12-01

Although emissions of air pollutants from some military tactical equipment are not subject to the emissions standards, local communities near military bases must conform to the National Ambient Air Quality Standards. Military diesel generators are widely used in training. A portable in-plume system was used to measure fuel-based emission factors (EFs) for particulate matter (PM), carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbons (HCs) for 30-, 60-, and 100-kW generators at five load levels and for cold starts. It was found that EFs depend on multiple parameters including engine size, engine load, unit age, and total running hours. The average CO EF of generators tested was 5% lower, and the average NOx EF was 63% lower than AP-42 estimates; average PM EF was 80% less than the AP-42 estimates. A 2002 model-year 60-kW engine produced 25% less PM than a 1995 engine of the same family with similar running hours. CO EFs decrease with increasing engine load, NOx EFs increase up to mid-loads and decrease slightly at high loads, PM EFs increase with loads for 30- and 60-kW engines. CO and PM have higher EFs and NOx has a lower EF during cold starts than during hot-stabilized operation. PM chemical source profiles were also examined.

Ground water in carbonate rocks and regolith in the Fairview area, Tennessee

USGS Publications Warehouse

Burchett, C.R.; Zurawski, Ann; Sparkes, A.K.; Hollyday, E.F.

1983-01-01

Fourteen test wells drilled in the Fairview area, Tennessee, produce from 3 to 100 gallons per minute and have an average yield of 32 gallons per minute, measured while blowing water from the wells with compressed air. In comparison, the average yield of supply wells reported by drillers is 13 gallons per minute. Specific capacities for three of the test wells ranged from 0.3 to 0.6 gallons per minute per foot of drawdown after 8 hours of pumping at 20 to 47 gallons per minute. Two test wells had specific capacities of 1.1 and 0.4 gallons per foot of drawdown after 72 hours of pumping at 55 and 43 gallons per minute. The mineral content of ground water increases greatly below a gypsum horizon approximately 100 feet below the top of the Fort Payne Formation. Ground water above the gypsum horizon, however, meets the standards for finished drinking water. (USGS)

Remittance spectroscopy of human skin in vivo.

PubMed

Geyer, A; Vilser, W; Karte, K; Wollina, U

1996-08-01

The skin is an easily accessible organ on which non-invasive examination methods can be applied. Recently spectroscopic methods have been introduced in characterization of skin under physiological and pathological conditions. To examine remittance spectroscopic qualities of human skin in vivo and to clarify the influence of selected test conditions, a single-beam spectrometer MCS 410 (Carl Zeiss, Jena, Germany) has been used. Remittance spectra readings were performed in 35 volunteers. Wavelength ranged from 362 nm to 780 nm. Individual remittance values and their standard deviations were obtained from 20 readings under standardized test conditions. The effect of pressure, rubbing, cooling, washing, greasing and degreasing on average remittance values was investigated. Statistical analysis was done with paired Student's f-test and Fisher's test. Pressure increased remittance values over a wide range of wavelength, peaking at 518 nm. Greasing and degreasing modified spectral remittance of shorter wavelength peaking around 362 nm. Rubbing and cooling did not induce significant variations of spectral remittance of skin. Spectral remittance provides an individual profile in human skin, which may be influenced by pressure and greasing/ degreasing. To establish standardized test conditions with a narrow range of intra-individual variation these items have to be kept constant.

Physician Preferences to Communicate Neuropsychological Results: Comparison of Qualitative Descriptors and a Proposal to Reduce Communication Errors.

PubMed

Schoenberg, Mike R; Osborn, Katie E; Mahone, E Mark; Feigon, Maia; Roth, Robert M; Pliskin, Neil H

2017-11-08

Errors in communication are a leading cause of medical errors. A potential source of error in communicating neuropsychological results is confusion in the qualitative descriptors used to describe standardized neuropsychological data. This study sought to evaluate the extent to which medical consumers of neuropsychological assessments believed that results/findings were not clearly communicated. In addition, preference data for a variety of qualitative descriptors commonly used to communicate normative neuropsychological test scores were obtained. Preference data were obtained for five qualitative descriptor systems as part of a larger 36-item internet-based survey of physician satisfaction with neuropsychological services. A new qualitative descriptor system termed the Simplified Qualitative Classification System (Q-Simple) was proposed to reduce the potential for communication errors using seven terms: very superior, superior, high average, average, low average, borderline, and abnormal/impaired. A non-random convenience sample of 605 clinicians identified from four United States academic medical centers from January 1, 2015 through January 7, 2016 were invited to participate. A total of 182 surveys were completed. A minority of clinicians (12.5%) indicated that neuropsychological study results were not clearly communicated. When communicating neuropsychological standardized scores, the two most preferred qualitative descriptor systems were by Heaton and colleagues (26%) and a newly proposed Q-simple system (22%). Comprehensive norms for an extended Halstead-Reitan battery: Demographic corrections, research findings, and clinical applications. Odessa, TX: Psychological Assessment Resources) (26%) and the newly proposed Q-Simple system (22%). Initial findings highlight the need to improve and standardize communication of neuropsychological results. These data offer initial guidance for preferred terms to communicate test results and form a foundation for more standardized practice among neuropsychologists. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Effects of Course Experiences on Self-Efficacy in Teaching Math: A Case Study of Preservice Elementary Teachers

ERIC Educational Resources Information Center

Ogden, Michele A.

2012-01-01

Elementary students' math achievement in the United States is mediocre in comparison to that of students in other countries. Students in California perform below the national average on standardized tests. Reform efforts in mathematics education aim at proficiency in fact fluency, procedural knowledge, conceptual knowledge, and application of…

Beating the Odds: High-Achieving Elementary Schools in High-Poverty Neighborhoods.

ERIC Educational Resources Information Center

Connell, Noreen

This report examines elementary schools serving poor neighborhoods in New York City that have been able to bring their students up to or above the average for the city on standardized tests in the 1996-1997 school year to see how teachers, parents, students, and principals have worked together. After eliminating schools with new principals and…

A Revised Admissions Standard for One Community College Nursing Program

ERIC Educational Resources Information Center

Lown, Maris A.

2010-01-01

Predicting success on the NCLEX-RN is of paramount importance to nursing programs as they are held accountable for this outcome by accrediting agencies and by boards of nursing. This action research study examined the relationship between the NET admission test, anatomy and physiology grades, grade point average (GPA) on admission to the program…

The Validity of the Academic Rigor Index (ARI) for Predicting FYGPA. Research Report 2012-5

ERIC Educational Resources Information Center

Mattern, Krista D.; Wyatt, Jeffrey N.

2012-01-01

A recurrent trend in higher education research has been to identify additional predictors of college success beyond the traditional measures of high school grade point average (HSGPA) and standardized test scores, given that a large percentage of unaccounted variance in college performance remains. A recent study by Wyatt, Wiley, Camara, and…

Teachers' Perceptions in Developing Robust Vocabulary Instruction at an American International School

ERIC Educational Resources Information Center

Lee, Cathleen S. M.

2017-01-01

At an international school in Taiwan, English learners have struggled to meet the U.S. national average in vocabulary on standardized testing instruments. This problem has become more significant since 2009. The purpose of this research was to conduct a case study on successful vocabulary teachers to determine their perceptions of effective…

Recycled fiber quality from a laboratory-scale blade separator/blend

Treesearch

Bei-Hong Liang; Stephen M. Shaler; Laurence Mott; Leslie Groom

1994-01-01

A simple and inexpensive fiber separator/blender was developed to generate useful secondary fibers from hydropulped waste paper. Processing wet hydropulped fiber resulted in a furnish with no change in average fiber length in three out of four types of recycled fibers tested. In all cases, the Canadian Standard freeness increased after processing compared to...

Recycled fiber quality from a laboratory-scale blade separator/blender

Treesearch

Bei-Hong Liang; Stephen M. Shaler; Laurence Mott; Leslie Groom

1994-01-01

A simple and inexpensive fiber separator/blender was developed to generate useful secondary fibers from hydropulped waste paper. Processing wet hydropulped fiber resulted in a furnish with no change in average fiber length in three out of four types of recycled fibers tested. In all cases, the canadian standard freeness increased after processing compared to...

Environmental Factors Associated with the Growth of Chinese Literary Genius: A Test of Rogerian Assumption.

ERIC Educational Resources Information Center

Kuo, You-Yuk

1987-01-01

This study explored relationships between environmental factors (era, standard of living, freedom, and value) and the growth of Chinese literary genius. Using a new measure, the Chinese Creator Rating Scale, the study found that historical top scorers had above average values on the four environmental factors, supporting the humanistic theory of…

Study of surge current effects on solid tantalum capacitors

NASA Technical Reports Server (NTRS)

1980-01-01

Results are presented of a 2,000 hour cycled life test program conducted to determine the effect of short term surge current screening on approximately 47 micron f/volt solid tantalum capacitors. The format provides average values and standard deviations of the parameters, capacitance, dissipation factor, and equivalent series resistance at 120 Hz, 1KHz, abd 40 KHz.

The Relationship of Religious Involvement to a Variety of Indicators of Cognitive Ability and Achievement in College Students.

ERIC Educational Resources Information Center

Zern, David S.

1987-01-01

Undergraduates reported anonymously their degree of religiousness, their Scholastic Aptitude Test (SAT) scores, and their grade point averages (GPAs). Found religiousness negatively related to ability, and not related to achievement. The students' capacity to maximize their potential, measured by the standard score difference between GPA and SAT,…

[The costs of new drugs compared to current standard treatment].

PubMed

Ujeyl, Mariam; Schlegel, Claudia; Gundert-Remy, Ursula

2013-01-01

Until AMNOG came into effect Germany had free pricing of new drugs. Our exemplary work investigates the costs of new drugs that were licensed in the two years prior to AMNOG, and compares them to the costs of standard treatment that has been used in pivotal trials. Also, the important components of pharmaceutical prices will be illustrated. We retrospectively analysed the European Public Assessment Reports of proprietary medicinal products that the European Medicinal Agency initially approved in 2009 and 2010 and that were tested against an active control in at least one pivotal trial. If the standard treatment was a generic, the average pharmacy retail price of new drugs was 7.4 times (median 7.1) higher than that of standard treatment. If the standard treatment was an originator drug the average price was 1.4 times (median 1.2) higher than that of the new drug. There was no clear correlation of an increase in costs for new drugs and their "grade of innovation" as rated according to the criteria of Fricke. Our study shows that prices of new drugs must be linked to the evidence of comparative benefit; since German drug pricing is complex, cost saving effects obtained thereby will depend on a range of other rules and decisions. Copyright © 2013. Published by Elsevier GmbH.

Computerized Adaptive Test vs. decision trees: Development of a support decision system to identify suicidal behavior.

PubMed

Delgado-Gomez, D; Baca-Garcia, E; Aguado, D; Courtet, P; Lopez-Castroman, J

2016-12-01

Several Computerized Adaptive Tests (CATs) have been proposed to facilitate assessments in mental health. These tests are built in a standard way, disregarding useful and usually available information not included in the assessment scales that could increase the precision and utility of CATs, such as the history of suicide attempts. Using the items of a previously developed scale for suicidal risk, we compared the performance of a standard CAT and a decision tree in a support decision system to identify suicidal behavior. We included the history of past suicide attempts as a class for the separation of patients in the decision tree. The decision tree needed an average of four items to achieve a similar accuracy than a standard CAT with nine items. The accuracy of the decision tree, obtained after 25 cross-validations, was 81.4%. A shortened test adapted for the separation of suicidal and non-suicidal patients was developed. CATs can be very useful tools for the assessment of suicidal risk. However, standard CATs do not use all the information that is available. A decision tree can improve the precision of the assessment since they are constructed using a priori information. Copyright © 2016 Elsevier B.V. All rights reserved.

49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Termination of exemption; amendment of alternative average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS...

40 CFR 464.44 - New source performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards. 464...

40 CFR 464.14 - New source performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2013-07-01 2013-07-01 false New source performance standards. 464...

40 CFR 464.14 - New source performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards. 464...

40 CFR 464.44 - New source performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2014-07-01 2014-07-01 false New source performance standards. 464...

40 CFR 464.24 - New source performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2013-07-01 2013-07-01 false New source performance standards. 464...

40 CFR 464.24 - New source performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2011-07-01 2011-07-01 false New source performance standards. 464...

40 CFR 464.24 - New source performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards. 464...

40 CFR 464.44 - New source performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2013-07-01 2013-07-01 false New source performance standards. 464...

40 CFR 464.44 - New source performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2012-07-01 2012-07-01 false New source performance standards. 464...

40 CFR 464.24 - New source performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2014-07-01 2014-07-01 false New source performance standards. 464...

40 CFR 464.44 - New source performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2011-07-01 2011-07-01 false New source performance standards. 464...

40 CFR 464.24 - New source performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2012-07-01 2012-07-01 false New source performance standards. 464...

40 CFR 464.14 - New source performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2014-07-01 2014-07-01 false New source performance standards. 464...

40 CFR 464.14 - New source performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 30 2011-07-01 2011-07-01 false New source performance standards. 464...

40 CFR 464.14 - New source performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards.... Concentration standards and annual average mass standards shall only apply to non-continuous dischargers. (a... 40 Protection of Environment 31 2012-07-01 2012-07-01 false New source performance standards. 464...

Measurement of protein digestibility in humans by a dual-tracer method.

PubMed

Devi, Sarita; Varkey, Aneesia; Sheshshayee, M S; Preston, Thomas; Kurpad, Anura V

2018-06-01

Recent evaluations of the risk of dietary protein deficiency have indicated that protein digestibility may be a key limiting factor in the provision of indispensable amino acids (IAAs), particularly for vulnerable populations living in challenging environments where intestinal dysfunction may exist. Since the digestion of protein occurs only in the small intestine, and the metabolic activity of colonic bacteria confounds measurements at the fecal level, there is a need to develop noninvasive protein digestibility measurements at the ileal level. We used a dual-tracer method with stable isotopes to characterize the digestibility of uniformly labeled [13C]-spirulina protein as a standard protein, in comparison to a mixture of 2H-labeled crystalline amino acids, and then demonstrated the use of this standard protein to measure the digestibility of selected legumes (chick pea and mung bean) through the use of proteins that were intrinsically labeled with 2H. The digestibility of uniformly labeled [13C]-spirulina was first measured in 6 healthy volunteers (3 males and 3 females) by feeding it along with a standard mixture of 2H-labeled amino acids, in a dual-tracer, plateau-fed test meal approach. Next, intrinsically labeled legume protein digestibility was studied with a similar dual-tracer approach, with uniformly labeled [13C]-spirulina as the standard, when processed differently before consumption. The average digestibility of IAA in spirulina protein was 85.2%. The average IAA digestibility of intrinsically 2H-labeled chick pea and mung bean protein was 56.6% and 57.7%, respectively. Dehulling of mung bean before ingestion increased the average IAA digestibility by 9.9% in comparison to whole mung bean digestibility. An innovative, minimally invasive "dual-stable-isotope" method was developed to measure protein digestibility, in which the ingestion of an intrinsically 2H-labeled test protein along with a 13C-labeled standard protein of known digestibility allows for an accurate measure of digestion and absorption of the intrinsically labeled protein. This minimally invasive method is critical to redefining protein quality and will aid in revisiting human protein requirements in different settings and in vulnerable populations. This trial was registered at Clinical Trials Registry-India as CTRI/2017/11/010468.

Status of the Local Enforcement of Energy Efficiency Standards and Labeling Program in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina; Fino-Chen, Cecilia

2011-09-26

As part of its commitment to promoting and improving the local enforcement of appliance energy efficiency standards and labeling, the China National Institute of Standardization (CNIS) launched the National and Local Enforcement of Energy Efficiency Standards and Labeling project on August 14, 2009. The project’s short-term goal is to expand the effort to improve enforcement of standards and labeling requirements to the entire country within three years, with a long-term goal of perfecting overall enforcement. For this project, Jiangsu, Shandong, Sichuan and Shanghai were selected as pilot locations. This report provides information on the local enforcement project’s recent background, activitiesmore » and results as well as comparison to previous rounds of check-testing in 2006 and 2007. In addition, the report also offers evaluation on the achievement and weaknesses in the local enforcement scheme and recommendations. The results demonstrate both improvement and some backsliding. Enforcement schemes are in place in all target cities and applicable national standards and regulations were followed as the basis for local check testing. Check testing results show in general high labeling compliance across regions with 100% compliance for five products, including full compliance for all three products tested in Jiangsu province and two out of three products tested in Shandong province. Program results also identified key weaknesses in labeling compliance in Sichuan as well as in the efficiency standards compliance levels for small and medium three-phase asynchronous motors and self-ballasted fluorescent lamps. For example, compliance for the same product ranged from as low as 40% to 100% with mixed results for products that had been tested in previous rounds. For refrigerators, in particular, the efficiency standards compliance rate exhibited a wider range of 50% to 100%, and the average rate across all tested models also dropped from 96% in 2007 to 63%, possibly due to the implementation of newly strengthened efficiency standards in 2009. Areas for improvement include: Greater awareness at the local level to ensure that all manufacturers register their products with the label certification project and to minimize their resistance to inspections; improvement of the product sampling methodology to include representative testing of both large and small manufacturers and greater standardization of testing tools and procedures; and continued improvement in local enforcement efforts.« less

Variability in operation-based NO(x) emission factors with different test routes, and its effects on the real-driving emissions of light diesel vehicles.

PubMed

Lee, Taewoo; Park, Junhong; Kwon, Sangil; Lee, Jongtae; Kim, Jeongsoo

2013-09-01

The objective of this study is to quantify the differences in NO(x) emissions between standard and non-standard driving and vehicle operating conditions, and to estimate by how much NO(x) emissions exceed the legislative emission limits under typical Korean road traffic conditions. Twelve Euro 3-5 light-duty diesel vehicles (LDDVs) manufactured in Korea were driven on a chassis dynamometer over the standard New European Driving Cycle (NEDC) and a representative Korean on-road driving cycle (KDC). NO(x) emissions, average speeds and accelerations were calculated for each 1-km trip segment, so called averaging windows. The results suggest that the NO(x) emissions of the tested vehicles are more susceptible to variations in the driving cycles than to those in the operating conditions. Even under comparable operating conditions, the NO(x) control capabilities of vehicles differ from each other, i.e., NO(x) control is weaker for the KDC than for the NEDC. The NO(x) emissions over the KDC for given vehicle operating conditions exceed those over the NEDC by more than a factor of 8. Consequently, on-road NO(x) emission factors are estimated here to exceed the Euro 5 emission limit by up to a factor of 8, 4 and 3 for typical Korean urban, rural, and motorway road traffic conditions, respectively. Our findings support the development of technical regulations for supplementary real-world emission tests for emission certification and the corresponding research actions taken by automotive industries. Copyright © 2013 Elsevier B.V. All rights reserved.

Testing the Capacity of a Multi-Nutrient Profiling System to Guide Food and Beverage Reformulation: Results from Five National Food Composition Databases

PubMed Central

Combet, Emilie; Vlassopoulos, Antonis; Mölenberg, Famke; Gressier, Mathilde; Privet, Lisa; Wratten, Craig; Sharif, Sahar; Vieux, Florent; Lehmann, Undine; Masset, Gabriel

2017-01-01

Nutrient profiling ranks foods based on their nutrient composition, with applications in multiple aspects of food policy. We tested the capacity of a category-specific model developed for product reformulation to improve the average nutrient content of foods, using five national food composition datasets (UK, US, China, Brazil, France). Products (n = 7183) were split into 35 categories based on the Nestlé Nutritional Profiling Systems (NNPS) and were then classified as NNPS ‘Pass’ if all nutrient targets were met (energy (E), total fat (TF), saturated fat (SFA), sodium (Na), added sugars (AS), protein, calcium). In a modelling scenario, all NNPS Fail products were ‘reformulated’ to meet NNPS standards. Overall, a third (36%) of all products achieved the NNPS standard/pass (inter-country and inter-category range: 32%–40%; 5%–72%, respectively), with most products requiring reformulation in two or more nutrients. The most common nutrients to require reformulation were SFA (22%–44%) and TF (23%–42%). Modelled compliance with NNPS standards could reduce the average content of SFA, Na and AS (10%, 8% and 6%, respectively) at the food supply level. Despite the good potential to stimulate reformulation across the five countries, the study highlights the need for better data quality and granularity of food composition databases. PMID:28430118

Comparison of Gasoline Direct-Injection (GDI) and Port Fuel Injection (PFI) Vehicle Emissions: Emission Certification Standards, Cold-Start, Secondary Organic Aerosol Formation Potential, and Potential Climate Impacts.

PubMed

Saliba, Georges; Saleh, Rawad; Zhao, Yunliang; Presto, Albert A; Lambe, Andrew T; Frodin, Bruce; Sardar, Satya; Maldonado, Hector; Maddox, Christine; May, Andrew A; Drozd, Greg T; Goldstein, Allen H; Russell, Lynn M; Hagen, Fabian; Robinson, Allen L

2017-06-06

Recent increases in the Corporate Average Fuel Economy standards have led to widespread adoption of vehicles equipped with gasoline direct-injection (GDI) engines. Changes in engine technologies can alter emissions. To quantify these effects, we measured gas- and particle-phase emissions from 82 light-duty gasoline vehicles recruited from the California in-use fleet tested on a chassis dynamometer using the cold-start unified cycle. The fleet included 15 GDI vehicles, including 8 GDIs certified to the most-stringent emissions standard, superultra-low-emission vehicles (SULEV). We quantified the effects of engine technology, emission certification standards, and cold-start on emissions. For vehicles certified to the same emissions standard, there is no statistical difference of regulated gas-phase pollutant emissions between PFIs and GDIs. However, GDIs had, on average, a factor of 2 higher particulate matter (PM) mass emissions than PFIs due to higher elemental carbon (EC) emissions. SULEV certified GDIs have a factor of 2 lower PM mass emissions than GDIs certified as ultralow-emission vehicles (3.0 ± 1.1 versus 6.3 ± 1.1 mg/mi), suggesting improvements in engine design and calibration. Comprehensive organic speciation revealed no statistically significant differences in the composition of the volatile organic compounds emissions between PFI and GDIs, including benzene, toluene, ethylbenzene, and xylenes (BTEX). Therefore, the secondary organic aerosol and ozone formation potential of the exhaust does not depend on engine technology. Cold-start contributes a larger fraction of the total unified cycle emissions for vehicles meeting more-stringent emission standards. Organic gas emissions were the most sensitive to cold-start compared to the other pollutants tested here. There were no statistically significant differences in the effects of cold-start on GDIs and PFIs. For our test fleet, the measured 14.5% decrease in CO 2 emissions from GDIs was much greater than the potential climate forcing associated with higher black carbon emissions. Thus, switching from PFI to GDI vehicles will likely lead to a reduction in net global warming.

A refined method for multivariate meta-analysis and meta-regression.

PubMed

Jackson, Daniel; Riley, Richard D

2014-02-20

Making inferences about the average treatment effect using the random effects model for meta-analysis is problematic in the common situation where there is a small number of studies. This is because estimates of the between-study variance are not precise enough to accurately apply the conventional methods for testing and deriving a confidence interval for the average effect. We have found that a refined method for univariate meta-analysis, which applies a scaling factor to the estimated effects' standard error, provides more accurate inference. We explain how to extend this method to the multivariate scenario and show that our proposal for refined multivariate meta-analysis and meta-regression can provide more accurate inferences than the more conventional approach. We explain how our proposed approach can be implemented using standard output from multivariate meta-analysis software packages and apply our methodology to two real examples. Copyright © 2013 John Wiley & Sons, Ltd.

7 CFR 51.2561 - Average moisture content.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Average moisture content. 51.2561 Section 51.2561... STANDARDS) United States Standards for Grades of Shelled Pistachio Nuts § 51.2561 Average moisture content. (a) Determining average moisture content of the lot is not a requirement of the grades, except when...

Evaluating multicenter DTI data in Huntington's disease on site specific effects: An ex post facto approach.

PubMed

Müller, Hans-Peter; Grön, Georg; Sprengelmeyer, Reiner; Kassubek, Jan; Ludolph, Albert C; Hobbs, Nicola; Cole, James; Roos, Raymund A C; Duerr, Alexandra; Tabrizi, Sarah J; Landwehrmeyer, G Bernhard; Süssmuth, Sigurd D

2013-01-01

Assessment of the feasibility to average diffusion tensor imaging (DTI) metrics of MRI data acquired in the course of a multicenter study. Sixty-one early stage Huntington's disease patients and forty healthy controls were studied using four different MR scanners at four European sites with acquisition protocols as close as possible to a given standard protocol. The potential and feasibility of averaging data acquired at different sites was evaluated quantitatively by region-of-interest (ROI) based statistical comparisons of coefficients of variation (CV) across centers, as well as by testing for significant group-by-center differences on averaged fractional anisotropy (FA) values between patients and controls. In addition, a whole-brain based statistical between-group comparison was performed using FA maps. The ex post facto statistical evaluation of CV and FA-values in a priori defined ROIs showed no differences between sites above chance indicating that data were not systematically biased by center specific factors. Averaging FA-maps from DTI data acquired at different study sites and different MR scanner types does not appear to be systematically biased. A suitable recipe for testing on the possibility to pool multicenter DTI data is provided to permit averaging of DTI-derived metrics to differentiate patients from healthy controls at a larger scale.

A statistical analysis of energy and power demand for the tractive purposes of an electric vehicle in urban traffic - an analysis of a short and long observation period

NASA Astrophysics Data System (ADS)

Slaski, G.; Ohde, B.

2016-09-01

The article presents the results of a statistical dispersion analysis of an energy and power demand for tractive purposes of a battery electric vehicle. The authors compare data distribution for different values of an average speed in two approaches, namely a short and long period of observation. The short period of observation (generally around several hundred meters) results from a previously proposed macroscopic energy consumption model based on an average speed per road section. This approach yielded high values of standard deviation and coefficient of variation (the ratio between standard deviation and the mean) around 0.7-1.2. The long period of observation (about several kilometers long) is similar in length to standardized speed cycles used in testing a vehicle energy consumption and available range. The data were analysed to determine the impact of observation length on the energy and power demand variation. The analysis was based on a simulation of electric power and energy consumption performed with speed profiles data recorded in Poznan agglomeration.

Development of a frequency regulation duty-cycle for standardized energy storage performance testing

DOE PAGES

Rosewater, David; Ferreira, Summer

2016-05-25

The US DOE Protocol for uniformly measuring and expressing the performance of energy storage systems, first developed in 2012 through inclusive working group activities, provides standardized methodologies for evaluating an energy storage system’s ability to supply specific services to electrical grids. This article elaborates on the data and decisions behind the duty-cycle used for frequency regulation in this protocol. Analysis of a year of publicly available frequency regulation control signal data from a utility was considered in developing the representative signal for this use case. Moreover, this showed that signal standard deviation can be used as a metric for aggressivenessmore » or rigor. From these data, we select representative 2 h long signals that exhibit nearly all of dynamics of actual usage under two distinct regimens, one for average use and the other for highly aggressive use. Our results were combined into a 24-h duty-cycle comprised of average and aggressive segments. The benefits and drawbacks of the selected duty-cycle are discussed along with its potential implications to the energy storage industry.« less

Design and preliminary assessment of Vanderbilt hand exoskeleton.

PubMed

Gasser, Benjamin W; Bennett, Daniel A; Durrough, Christina M; Goldfarb, Michael

2017-07-01

This paper presents the design of a hand exoskeleton intended to enable or facilitate bimanual activities of daily living (ADLs) for individuals with chronic upper extremity hemiparesis resulting from stroke. The paper describes design of the battery-powered, self-contained exoskeleton and presents the results of initial testing with a single subject with hemiparesis from stroke. Specifically, an experiment was conducted requiring the subject to repeatedly remove the lid from a water bottle both with and without the hand exoskeleton. The relative times required to remove the lid from the bottles was considerably lower when using the exoskeleton. Specifically, the average amount of time required to grasp the bottle with the paretic hand without the exoskeleton was 25.9 s, with a standard deviation of 33.5 s, while the corresponding average amount of time required to grasp the bottle with the exoskeleton was 5.1 s, with a standard deviation of 1.9 s. Thus, the task time involving the paretic hand was reduced by a factor of five, while the standard deviation was reduced by a factor of 16.

Real-time mid-infrared imaging of living microorganisms.

PubMed

Haase, Katharina; Kröger-Lui, Niels; Pucci, Annemarie; Schönhals, Arthur; Petrich, Wolfgang

2016-01-01

The speed and efficiency of quantum cascade laser-based mid-infrared microspectroscopy are demonstrated using two different model organisms as examples. For the slowly moving Amoeba proteus, a quantum cascade laser is tuned over the wavelength range of 7.6 µm to 8.6 µm (wavenumbers 1320 cm(-1) and 1160 cm(-1) , respectively). The recording of a hyperspectral image takes 11.3 s whereby an average signal-to-noise ratio of 29 is achieved. The limits of time resolution are tested by imaging the fast moving Caenorhabditis elegans at a discrete wavenumber of 1265 cm(-1) . Mid-infrared imaging is performed with the 640 × 480 pixel video graphics array (VGA) standard and at a full-frame time resolution of 0.02 s (i.e. well above the most common frame rate standards). An average signal-to-noise ratio of 16 is obtained. To the best of our knowledge, these findings constitute the first mid-infrared imaging of living organisms at VGA standard and video frame rate. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The European standard for sun-protective clothing: EN 13758.

PubMed

Gambichler, T; Laperre, J; Hoffmann, K

2006-02-01

Clothing is considered one of the most important tools for sun protection. Contrary to popular opinion, however, some summer fabrics provide insufficient ultraviolet (UV) protection. The European Committee for Standardization (CEN), has developed a new standard on requirements for test methods and labelling of sun-protective garments. This document has now been completed and is published. Within CEN, a working group, CEN/TC 248 WG14 'UV protective clothing', was set up with the mission to produce standards on the UV-protective properties of textile materials. This working group started its activities in 1998 and included 30 experts (dermatologists, physicists, textile technologists, fabric manufacturers and retailers of apparel textiles) from 11 European member states. Within this working group, all medical, ethical, technical and economical aspects of standardization of UV-protective clothing were discussed on the basis of the expertise of each member and in consideration of the relevant literature in this field. Decisions were made in consensus. The first part of the standard (EN 13758-1) deals with all details of test methods (e.g. spectrophotometric measurements) for textile materials and part 2 (EN 13758-2) covers classification and marking of apparel textiles. UV-protective cloths for which compliance with this standard is claimed must fulfill all stringent instructions of testing, classification and marking, including a UV protection factor (UPF) larger than 40 (UPF 40+), average UVA transmission lower than 5%, and design requirements as specified in part 2 of the standard. A pictogram, which is marked with the number of the standard EN 13758-2 and the UPF of 40+, shall be attached to the garment if it is in compliance with the standard. The dermatology community should take cognizance of this new standard document. Garment manufacturers and retailers may now follow these official guidelines for testing and labelling of UV-protective summer clothes, and the sun-aware consumer can easily recognize garments that definitely provide sufficient UV protection.

40 CFR 413.04 - Standards for integrated facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... GUIDELINES AND STANDARDS ELECTROPLATING POINT SOURCE CATEGORY General Provisions § 413.04 Standards for... § 403.6(e) of EPA's General Pretreatment Regulations. In cases where electroplating process wastewaters... average standard for the electroplating wastewaters must be used. The 30 day average shall be determined...

Extraction of UMLS® Concepts Using Apache cTAKES™ for German Language.

PubMed

Becker, Matthias; Böckmann, Britta

2016-01-01

Automatic information extraction of medical concepts and classification with semantic standards from medical reports is useful for standardization and for clinical research. This paper presents an approach for an UMLS concept extraction with a customized natural language processing pipeline for German clinical notes using Apache cTAKES. The objectives are, to test the natural language processing tool for German language if it is suitable to identify UMLS concepts and map these with SNOMED-CT. The German UMLS database and German OpenNLP models extended the natural language processing pipeline, so the pipeline can normalize to domain ontologies such as SNOMED-CT using the German concepts. For testing, the ShARe/CLEF eHealth 2013 training dataset translated into German was used. The implemented algorithms are tested with a set of 199 German reports, obtaining a result of average 0.36 F1 measure without German stemming, pre- and post-processing of the reports.

VDLLA: A virtual daddy-long legs optimization

NASA Astrophysics Data System (ADS)

Yaakub, Abdul Razak; Ghathwan, Khalil I.

2016-08-01

Swarm intelligence is a strong optimization algorithm based on a biological behavior of insects or animals. The success of any optimization algorithm is depending on the balance between exploration and exploitation. In this paper, we present a new swarm intelligence algorithm, which is based on daddy long legs spider (VDLLA) as a new optimization algorithm with virtual behavior. In VDLLA, each agent (spider) has nine positions which represent the legs of spider and each position represent one solution. The proposed VDLLA is tested on four standard functions using average fitness, Medium fitness and standard deviation. The results of proposed VDLLA have been compared against Particle Swarm Optimization (PSO), Differential Evolution (DE) and Bat Inspired Algorithm (BA). Additionally, the T-Test has been conducted to show the significant deference between our proposed and other algorithms. VDLLA showed very promising results on benchmark test functions for unconstrained optimization problems and also significantly improved the original swarm algorithms.

Handheld ultrasound versus physical examination in patients referred for transthoracic echocardiography for a suspected cardiac condition.

PubMed

Mehta, Manish; Jacobson, Timothy; Peters, Dawn; Le, Elizabeth; Chadderdon, Scott; Allen, Allison J; Caughey, Aaron B; Kaul, Sanjiv

2014-10-01

The purpose of this study was to test the hypothesis that handheld ultrasound (HHU) provides a more accurate diagnosis than physical examination in patients with suspected cardiovascular abnormalities and that its use thus reduces additional testing and overall costs. Despite the limitations of physical examination and the demonstrated superiority of HHU for detecting cardiac abnormalities, it is not routinely used for the bedside diagnosis of cardiac conditions. Patients referred for a standard echocardiogram for common indications (cardiac function, murmur, stroke, arrhythmias, and miscellaneous) underwent physical examination and HHU by different cardiologists, who filled out a form that also included suggestions for additional testing, if necessary, based on their findings. Of 250 patients, 142 had an abnormal finding on standard echocardiogram. Of these, HHU correctly identified 117 patients (82%), and physical examination correctly identified 67 (47%, p < 0.0001). HHU was superior to physical examination (p < 0.0001) for both normal and abnormal cardiac function. It was also superior to physical examination in correctly identifying the presence of substantial valve disease (71% vs. 31%, p = 0.0003) and in identifying miscellaneous findings (47% vs. 3%, p < 0.0001). Of 108 patients without any abnormalities on standard echocardiography, further testing was suggested for 89 (82%) undergoing physical examination versus only 60 (56%) undergoing HHU (p < 0.0001). Cost modeling showed that HHU had an average cost of $644.43 versus an average cost of $707.44 for physical examination. This yielded a savings of $63.01 per patient when HHU was used versus physical examination. When used by cardiologists, HHU provides a more accurate diagnosis than physical examination for the majority of common cardiovascular abnormalities. The finding of no significant abnormality on HHU is also likely to result in less downstream testing and thus potentially reduce the overall cost for patients being evaluated for a cardiovascular diagnosis. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

New York Charter Schools Outperform Traditional Selective Public Schools: More Evidence That Cream-Skimming Is Not Driving Charters' Success. Report 33

ERIC Educational Resources Information Center

Winters, Marcus A.

2017-01-01

Critics of charter schools in New York City, America's largest school district, often allege that charters score better on standardized tests, on average, than traditional public schools because charters "cream-skim" (i.e., attract) the brightest, most motivated, students. Yet this accusation neglects the fact that not all traditional…

Are SSATs and GPA Enough? A Theory-Based Approach to Predicting Academic Success in Secondary School

ERIC Educational Resources Information Center

Grigorenko, Elena L.; Jarvin, Linda; Diffley, Ray; Goodyear, Julie; Shanahan, Edward J.; Sternberg, Robert J.

2009-01-01

Two studies were carried out to predict academic success in the highly competitive environment of a private preparatory school, Choate Rosemary Hall. The 1st study focused on the question of whether there are indicators beyond middle school grade-point average (GPA) and standardized test scores that might enhance the validity of measures for…

Improving First Grade Academic Skills through the Integration of Music into the First Grade Curriculum.

ERIC Educational Resources Information Center

Hart-Davis, Charity

This study designed a music program for improving academic skills of first grade students after the teaching staff found the students doing average work in the classroom. The school involved in the study was located in an urban, middle class community in Northern Illinois. Results of standardized tests showed the extent of the academic problems of…

The Mathematical and Science Skills of Students Who Are Deaf or Hard of Hearing Educated in Inclusive Settings

ERIC Educational Resources Information Center

Vosganoff, Diane; Paatsch, Louise E.; Toe, Dianne M.

2011-01-01

This study examined the science and mathematics achievements of 16 Year 9 students with hearing loss in an inclusive high-school setting in Western Australia. Results from the Monitoring Standards in Education (MSE) compulsory state tests were compared with state and class averages for students with normal hearing. Data were collected from three…

General Mental Ability in South Asians: Data from Three Roma (Gypsy) Communities in Serbia

ERIC Educational Resources Information Center

Rushton, J. Philippe; Cvorovic, Jelena; Bons, Trudy Ann

2007-01-01

To examine whether the Roma (Gypsy) population of Serbia, like other South Asian population groups, average lower than Europeans on "g", the general factor of intelligence, we tested 323 16- to 66-year-olds (111 males; 212 females) in three different communities over a two-year-period on the Raven's Colored and/or Standard Progressive…

40 CFR 60.43Da - Standard for sulfur dioxide (SO2).

Code of Federal Regulations, 2010 CFR

2010-07-01

..., and that burns 75 percent or more (by heat input) coal refuse on a 12-month rolling average basis...) of this section, any gases that contain SO2 in excess of: (1) 520 ng/J (1.20 lb/MMBtu) heat input and.../MMBtu) heat input. (b) On and after the date on which the initial performance test is completed or...

Gauging Skills of Hospital Security Personnel: a Statistically-driven, Questionnaire-based Approach.

PubMed

Rinkoo, Arvind Vashishta; Mishra, Shubhra; Rahesuddin; Nabi, Tauqeer; Chandra, Vidha; Chandra, Hem

2013-01-01

This study aims to gauge the technical and soft skills of the hospital security personnel so as to enable prioritization of their training needs. A cross sectional questionnaire based study was conducted in December 2011. Two separate predesigned and pretested questionnaires were used for gauging soft skills and technical skills of the security personnel. Extensive statistical analysis, including Multivariate Analysis (Pillai-Bartlett trace along with Multi-factorial ANOVA) and Post-hoc Tests (Bonferroni Test) was applied. The 143 participants performed better on the soft skills front with an average score of 6.43 and standard deviation of 1.40. The average technical skills score was 5.09 with a standard deviation of 1.44. The study avowed a need for formal hands on training with greater emphasis on technical skills. Multivariate analysis of the available data further helped in identifying 20 security personnel who should be prioritized for soft skills training and a group of 36 security personnel who should receive maximum attention during technical skills training. This statistically driven approach can be used as a prototype by healthcare delivery institutions worldwide, after situation specific customizations, to identify the training needs of any category of healthcare staff.

Gauging Skills of Hospital Security Personnel: a Statistically-driven, Questionnaire-based Approach

PubMed Central

Rinkoo, Arvind Vashishta; Mishra, Shubhra; Rahesuddin; Nabi, Tauqeer; Chandra, Vidha; Chandra, Hem

2013-01-01

Objectives This study aims to gauge the technical and soft skills of the hospital security personnel so as to enable prioritization of their training needs. Methodology A cross sectional questionnaire based study was conducted in December 2011. Two separate predesigned and pretested questionnaires were used for gauging soft skills and technical skills of the security personnel. Extensive statistical analysis, including Multivariate Analysis (Pillai-Bartlett trace along with Multi-factorial ANOVA) and Post-hoc Tests (Bonferroni Test) was applied. Results The 143 participants performed better on the soft skills front with an average score of 6.43 and standard deviation of 1.40. The average technical skills score was 5.09 with a standard deviation of 1.44. The study avowed a need for formal hands on training with greater emphasis on technical skills. Multivariate analysis of the available data further helped in identifying 20 security personnel who should be prioritized for soft skills training and a group of 36 security personnel who should receive maximum attention during technical skills training. Conclusion This statistically driven approach can be used as a prototype by healthcare delivery institutions worldwide, after situation specific customizations, to identify the training needs of any category of healthcare staff. PMID:23559904

A hybrid model for combining case-control and cohort studies in systematic reviews of diagnostic tests

PubMed Central

Chen, Yong; Liu, Yulun; Ning, Jing; Cormier, Janice; Chu, Haitao

2014-01-01

Systematic reviews of diagnostic tests often involve a mixture of case-control and cohort studies. The standard methods for evaluating diagnostic accuracy only focus on sensitivity and specificity and ignore the information on disease prevalence contained in cohort studies. Consequently, such methods cannot provide estimates of measures related to disease prevalence, such as population averaged or overall positive and negative predictive values, which reflect the clinical utility of a diagnostic test. In this paper, we propose a hybrid approach that jointly models the disease prevalence along with the diagnostic test sensitivity and specificity in cohort studies, and the sensitivity and specificity in case-control studies. In order to overcome the potential computational difficulties in the standard full likelihood inference of the proposed hybrid model, we propose an alternative inference procedure based on the composite likelihood. Such composite likelihood based inference does not suffer computational problems and maintains high relative efficiency. In addition, it is more robust to model mis-specifications compared to the standard full likelihood inference. We apply our approach to a review of the performance of contemporary diagnostic imaging modalities for detecting metastases in patients with melanoma. PMID:25897179

Experimental determination of drift and PM10 cooling tower emissions: Influence of components and operating conditions.

PubMed

Ruiz, J; Kaiser, A S; Lucas, M

2017-11-01

Cooling tower emissions have become an increasingly common hazard to the environment (air polluting, ice formation and salts deposition) and to the health (Legionella disease) in the last decades. Several environmental policies have emerged in recent years limiting cooling tower emissions but they have not prevented an increasing intensity of outbreaks. Since the level of emissions depends mainly on cooling tower component design and the operating conditions, this paper deals with an experimental investigation of the amount of emissions, drift and PM 10 , emitted by a cooling tower with different configurations (drift eliminators and distribution systems) and working under several operating conditions. This objective is met by the measurement of cooling tower source emission parameters by means of the sensitive paper technique. Secondary objectives were to contextualize the observed emission rates according to international regulations. Our measurements showed that the drift rates included in the relevant international standards are significantly higher than the obtained results (an average of 100 times higher) and hence, the environmental problems may occur. Therefore, a revision of the standards is recommended with the aim of reducing the environmental and human health impact. By changing the operating conditions and the distribution system, emissions can be reduced by 52.03% and 82% on average. In the case of drift eliminators, the difference ranges from 18.18% to 98.43% on average. As the emissions level is clearly influenced by operating conditions and components, regulation tests should be referred to default conditions. Finally, guidelines to perform emission tests and a selection criterion of components and conditions for the tested cooling tower are proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of Pump Pulsation in Respirable Size-Selective Sampling: Part III. Investigation of European Standard Methods

PubMed Central

Soo, Jhy-Charm; Lee, Eun Gyung; Lee, Larry A.; Kashon, Michael L.; Harper, Martin

2015-01-01

Lee et al. (Evaluation of pump pulsation in respirable size-selective sampling: part I. Pulsation measurements. Ann Occup Hyg 2014a;58:60–73) introduced an approach to measure pump pulsation (PP) using a real-world sampling train, while the European Standards (EN) (EN 1232-1997 and EN 12919-1999) suggest measuring PP using a resistor in place of the sampler. The goal of this study is to characterize PP according to both EN methods and to determine the relationship of PP between the published method (Lee et al., 2014a) and the EN methods. Additional test parameters were investigated to determine whether the test conditions suggested by the EN methods were appropriate for measuring pulsations. Experiments were conducted using a factorial combination of personal sampling pumps (six medium- and two high-volumetric flow rate pumps), back pressures (six medium- and seven high-flow rate pumps), resistors (two types), tubing lengths between a pump and resistor (60 and 90 cm), and different flow rates (2 and 2.5 l min−1 for the medium- and 4.4, 10, and 11.2 l min−1 for the high-flow rate pumps). The selection of sampling pumps and the ranges of back pressure were based on measurements obtained in the previous study (Lee et al., 2014a). Among six medium-flow rate pumps, only the Gilian5000 and the Apex IS conformed to the 10% criterion specified in EN 1232-1997. Although the AirChek XR5000 exceeded the 10% limit, the average PP (10.9%) was close to the criterion. One high-flow rate pump, the Legacy (PP = 8.1%), conformed to the 10% criterion in EN 12919-1999, while the Elite12 did not (PP = 18.3%). Conducting supplemental tests with additional test parameters beyond those used in the two subject EN standards did not strengthen the characterization of PPs. For the selected test conditions, a linear regression model [PPEN = 0.014 + 0.375 × PPNIOSH (adjusted R2 = 0.871)] was developed to determine the PP relationship between the published method (Lee et al., 2014a) and the EN methods. The 25% PP criterion recommended by Lee et al. (2014a), average value derived from repetitive measurements, corresponds to 11% PPEN. The 10% pass/fail criterion in the EN Standards is not based on extensive laboratory evaluation and would unreasonably exclude at least one pump (i.e. AirChek XR5000 in this study) and, therefore, the more accurate criterion of average 11% from repetitive measurements should be substituted. This study suggests that users can measure PP using either a real-world sampling train or a resistor setup and obtain equivalent findings by applying the model herein derived. The findings of this study will be delivered to the consensus committees to be considered when those standards, including the EN 1232-1997, EN 12919-1999, and ISO 13137-2013, are revised. PMID:25053700

Manufacturer's Policies Concerning Average Fuel Economy Standards

DOT National Transportation Integrated Search

1979-01-01

The National Highway Traffic Safety Administration (NHTSA) has been given the responsibility for implementing the average fuel economy standards for passenger automobiles mandated by the Energy Policy and Conservation Act (P.L. 94-163). The standards...

Study of Odours and taste for Space Food

NASA Astrophysics Data System (ADS)

Katayama, Naomi; Space Agriculture Task Force; Nakata, Seiichi; Teranishi, Masaaki; Sone, Michihiko; Nakashima, Tsutomu; Hamajima, Nobuyuki; Ito, Yoshihiro

2012-07-01

The sense of taste and smell come under some kind of influences in the space environment. In the space, the astronaut was changed their food habits from light taste and smell food to like strong taste and smells food. When an astronaut live in the space comes to have weak bone like osteoporosis. It may become the physiologic condition like the old man on the earth. Therefore this study performed fact-finding of the smell and the taste in the old man on the earth as test bed of astronaut in space. Based on this finding, it was intended to predict the taste and the olfactory change of the astronaut in the space. The study included 179 males and 251 females aged 30-90 years in Yakumo Town, Hokkaido, Japan. Odours were tested using a ``standard odours by odour stick identification''method of organoleptic testing. Taste were tested using a ``standard taste by taste disc identification'' method of chemical testing. Correct answers for identification odours consisted of average 6.0±3.0 in male subjects and average 6.9±2.8 in female subjects. Correct answers for identification of sweet taste consisted of 81% males and 87% females, salty taste consisted of 86% males and 91%, sour taste consisted of 75% males and 78% females, bitter taste consisted of 76% males and 88% females. It became clear that overall approximately 20% were in some kind of abnormality in sense of smell and taste. I want to perform the investigation that continued more in future.

The Use of Cognitive Cues for Anticipatory Strategies in a Dynamic Postural Control Task - Validation of a Novel Approach to Dual-Task Testing.

PubMed

Laessoe, Uffe; Grarup, Bo; Bangshaab, Jette

2016-01-01

Dual-task testing is relevant in the assessment of postural control. A combination of a primary (motor) and a secondary (distracting cognitive) tasks is most often used. It remains a challenge however, to standardize and monitor the cognitive task. In this study a new dual-task testing approach with a facilitating, rather than distracting, cognitive component was evaluated. Thirty-one community-dwelling elderly and fifteen young people were tested with respect to their ability to use anticipatory postural control strategies. The motor task consisted of twenty-five repetitive tasks in which the participants needed to exceed their limit of stability in order to touch one out of eight lights. The participants performed three tests. In two of the tests the color cues of the lights allowed the participants to utilize cognitive strategies to plan their next movement and improve their performance time. The young performed the baseline motor task test in an average of 29 seconds, while the average time for the elderly was 44 seconds. When comparing the performance time with a leading cue to the time with no cue, the young group improved their performance time significantly better than the elderly did: young: 17% (5), elderly: 5% (8); p<0.001. Similar differences were seen with a more complicated leading cue: young: 12% (5), elderly: 4% (9); p<0.01. The reliability of the test showed moderate to substantial agreement (ICC = 0.74), with a small learning effect between two sessions. The dual-task test was sensitive enough to discriminate between elderly and young people. It revealed that the elderly did not utilize cognitive cues for their anticipatory postural control strategies as well as the young were able to. The test procedure was feasible and comprehensible for the participants, and it may be relevant to standardize a similar test for an alternative dual-task approach in the clinical setting.

A profilometry-based dentifrice abrasion Method for V8 brushing machines. Part I: Introduction to RDA-PE.

PubMed

White, Donald J; Schneiderman, Eva; Colón, Ellen; St John, Samuel

2015-01-01

This paper describes the development and standardization of a profilometry-based method for assessment of dentifrice abrasivity called Radioactive Dentin Abrasivity - Profilometry Equivalent (RDA-PE). Human dentine substrates are mounted in acrylic blocks of precise standardized dimensions, permitting mounting and brushing in V8 brushing machines. Dentin blocks are masked to create an area of "contact brushing." Brushing is carried out in V8 brushing machines and dentifrices are tested as slurries. An abrasive standard is prepared by diluting the ISO 11609 abrasivity reference calcium pyrophosphate abrasive into carboxymethyl cellulose/glycerin, just as in the RDA method. Following brushing, masked areas are removed and profilometric analysis is carried out on treated specimens. Assessments of average abrasion depth (contact or optical profilometry) are made. Inclusion of standard calcium pyrophosphate abrasive permits a direct RDA equivalent assessment of abrasion, which is characterized with profilometry as Depth test/Depth control x 100. Within the test, the maximum abrasivity standard of 250 can be created in situ simply by including a treatment group of standard abrasive with 2.5x number of brushing strokes. RDA-PE is enabled in large part by the availability of easy-to-use and well-standardized modern profilometers, but its use in V8 brushing machines is enabled by the unique specific conditions described herein. RDA-PE permits the evaluation of dentifrice abrasivity to dentin without the requirement of irradiated teeth and infrastructure for handling them. In direct comparisons, the RDA-PE method provides dentifrice abrasivity assessments comparable to the gold industry standard RDA technique.

Ethnic differences in the Goodenough-Harris draw-a-man and draw-a-woman tests.

PubMed

Dugdale, A E; Chen, S T

1979-11-01

The draw-a-man (DAM) and draw-a-woman (DAW) tests were given to 307 schoolchildren in Petaling Jaya, Malaysia. The children were ethnically Malay, Chinese, or Indian (Tamil), and all came from lower socioeconomic groups. The standard scores of the Chinese children averaged 118 in the DAM and 112 in the DAW tests. These scores were significantly better than the American standards. Malay children scored significantly lower than Chinese, and Tamil children scored lower again. The nutritional status of the children had no influence on the scores. Chinese and Tamil children scored better in the DAM than the DAW, while in Malay boys the reverse was true. Malay children tended to emphasise clothing in the DAM, but Chinese and Tamil children scored better on items relating to facial features and body proportions. The Goodenough-Harris draw-a-person tests are obviously not culture-free, but the causes of ethnic differences have not been elucidated.

40 CFR 80.1290 - How are standard benzene credits generated?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false How are standard benzene credits... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1290 How are standard benzene credits generated? (a) The standard credit averaging...

40 CFR 80.1290 - How are standard benzene credits generated?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false How are standard benzene credits... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1290 How are standard benzene credits generated? (a) The standard credit averaging...

40 CFR 80.1290 - How are standard benzene credits generated?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false How are standard benzene credits... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1290 How are standard benzene credits generated? (a) The standard credit averaging...

40 CFR 80.1290 - How are standard benzene credits generated?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How are standard benzene credits... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1290 How are standard benzene credits generated? (a) The standard credit averaging...

40 CFR 80.1290 - How are standard benzene credits generated?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false How are standard benzene credits... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1290 How are standard benzene credits generated? (a) The standard credit averaging...

Drying of vanilla pods using a greenhouse effect solar dryer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdullah, K.; Mursalim

This paper describes the basic design of the GHE solar dryer and evaluates the performance of the dryer when used to dry vanilla pods. From laboratory test results it was indicted that the average drying time for vanilla pods was between 49 to 53.5 hrs. For the case of heating augmentation using coal briquette stoves. The total amount of coal briquettes used to produce drying air temperature between 33 C to 65 C and RH of about 34% during day time was 61 kg equivalent to 6.1 kW heating rate and the average electric energy usage of 36.5 kWh, respectively.more » Quality test results indicated that the dried products were of grade IA of the export quality standard with vaniline content of 2.36%.« less

Common scaling behavior in finance and macroeconomics

NASA Astrophysics Data System (ADS)

Podobnik, B.; Horvatic, D.; Petersen, A. M.; Njavro, M.; Stanley, H. E.

2010-08-01

In order to test whether scaling exists in finance at the world level, we test whether the average growth rates and volatility of market capitalization (MC) depend on the level of MC. We analyze the MC for 54 worldwide stock indices and 48 worldwide bond indices. We find that (i) the average growth rate of the MC and (ii) the standard deviation σ(r) of growth rates r decrease both with MC as power laws, with exponents αw = 0.28 ± 0.09 and βw = 0.12 ± 0.04. We define a stochastic process in order to model the scaling results we find for worldwide stock and bond indices. We establish a power-law relationship between the MC of a country's financial market and the gross domestic product (GDP) of the same country.

New tension band material for fixation of transverse olecranon fractures: a biomechanical study.

PubMed

Lalonde, James Allen; Rabalais, R David; Mansour, Alfred; Burger, Evalina L; Riemer, Barry L; Lu, Yun; Baratta, Richard V

2005-10-01

This study tested the use of braided polyethylene cable as an option for repairing transverse olecranon fractures. Six cadaveric elbows underwent a transverse olecranon osteotomy followed by fixation with tension band constructs using 18-gauge wire and Secure-Strand (U.S. Surgical, North Haven, Conn). Distraction forces up to 450 N were applied to the triceps tendon while measuring fracture displacement with an extensometer. The average maximal fracture gap with the standard AO tension band technique using stainless steel wire was 0.66 +/- 0.43 mm, as opposed to 0.68 +/- 0.45 mm with braided polyethylene cable. A paired t test indicated no significant difference between the two materials. These results support the feasibility of braided polyethylene cable as an alternative to the standard steel-wire tension band.

An Exploratory Study of Reading Comprehension in College Students After Acquired Brain Injury.

PubMed

Sohlberg, McKay Moore; Griffiths, Gina G; Fickas, Stephen

2015-08-01

This exploratory study builds on the small body of existing research investigating reading comprehension deficits in college students with acquired brain injury (ABI). Twenty-four community college students with ABI completed a battery of questionnaires and standardized tests to characterize self-perceptions of academic reading ability, performance on a standardized reading comprehension measure, and a variety of cognitive functions of this population. Half of the participants in the sample reported traumatic brain injury (n = 12) and half reported nontraumatic ABI (n = 12). College students with both traumatic and nontraumatic ABI cite problems with reading comprehension and academic performance postinjury. Mean performance on a standardized reading measure, the Nelson-Denny Reading Test (Brown, Fischo, & Hanna, 1993), was low to below average and was significantly correlated with performance on the Speed and Capacity of Language Processing Test (Baddeley, Emslie, & Nimmo-Smith, 1992). Injury status of traumatic versus nontraumatic ABI did not differentiate results. Regression analysis showed that measures of verbal attention and suppression obtained from the California Verbal Language Test-II (Delis, Kramer, Kaplan, & Ober, 2000) predicted total scores on the Nelson-Denny Reading Test. College students with ABI are vulnerable to reading comprehension problems. Results align with other research suggesting that verbal attention and suppression problems may be contributing factors.

Testing of visual field with virtual reality goggles in manual and visual grasp modes.

PubMed

Wroblewski, Dariusz; Francis, Brian A; Sadun, Alfredo; Vakili, Ghazal; Chopra, Vikas

2014-01-01

Automated perimetry is used for the assessment of visual function in a variety of ophthalmic and neurologic diseases. We report development and clinical testing of a compact, head-mounted, and eye-tracking perimeter (VirtualEye) that provides a more comfortable test environment than the standard instrumentation. VirtualEye performs the equivalent of a full threshold 24-2 visual field in two modes: (1) manual, with patient response registered with a mouse click, and (2) visual grasp, where the eye tracker senses change in gaze direction as evidence of target acquisition. 59 patients successfully completed the test in manual mode and 40 in visual grasp mode, with 59 undergoing the standard Humphrey field analyzer (HFA) testing. Large visual field defects were reliably detected by VirtualEye. Point-by-point comparison between the results obtained with the different modalities indicates: (1) minimal systematic differences between measurements taken in visual grasp and manual modes, (2) the average standard deviation of the difference distributions of about 5 dB, and (3) a systematic shift (of 4-6 dB) to lower sensitivities for VirtualEye device, observed mostly in high dB range. The usability survey suggested patients' acceptance of the head-mounted device. The study appears to validate the concepts of a head-mounted perimeter and the visual grasp mode.

Assessment of a novel biomechanical fracture model for distal radius fractures

PubMed Central

2012-01-01

Background Distal radius fractures (DRF) are one of the most common fractures and often need surgical treatment, which has been validated through biomechanical tests. Currently a number of different fracture models are used, none of which resemble the in vivo fracture location. The aim of the study was to develop a new standardized fracture model for DRF (AO-23.A3) and compare its biomechanical behavior to the current gold standard. Methods Variable angle locking volar plates (ADAPTIVE, Medartis) were mounted on 10 pairs of fresh-frozen radii. The osteotomy location was alternated within each pair (New: 10 mm wedge 8 mm / 12 mm proximal to the dorsal / volar apex of the articular surface; Gold standard: 10 mm wedge 20 mm proximal to the articular surface). Each specimen was tested in cyclic axial compression (increasing load by 100 N per cycle) until failure or −3 mm displacement. Parameters assessed were stiffness, displacement and dissipated work calculated for each cycle and ultimate load. Significance was tested using a linear mixed model and Wald test as well as t-tests. Results 7 female and 3 male pairs of radii aged 74 ± 9 years were tested. In most cases (7/10), the two groups showed similar mechanical behavior at low loads with increasing differences at increasing loads. Overall the novel fracture model showed a significant different biomechanical behavior than the gold standard model (p < 0,001). The average final loads resisted were significantly lower in the novel model (860 N ± 232 N vs. 1250 N ± 341 N; p = 0.001). Conclusion The novel biomechanical fracture model for DRF more closely mimics the in vivo fracture site and shows a significantly different biomechanical behavior with increasing loads when compared to the current gold standard. PMID:23244634

String-averaging incremental subgradients for constrained convex optimization with applications to reconstruction of tomographic images

NASA Astrophysics Data System (ADS)

Massambone de Oliveira, Rafael; Salomão Helou, Elias; Fontoura Costa, Eduardo

2016-11-01

We present a method for non-smooth convex minimization which is based on subgradient directions and string-averaging techniques. In this approach, the set of available data is split into sequences (strings) and a given iterate is processed independently along each string, possibly in parallel, by an incremental subgradient method (ISM). The end-points of all strings are averaged to form the next iterate. The method is useful to solve sparse and large-scale non-smooth convex optimization problems, such as those arising in tomographic imaging. A convergence analysis is provided under realistic, standard conditions. Numerical tests are performed in a tomographic image reconstruction application, showing good performance for the convergence speed when measured as the decrease ratio of the objective function, in comparison to classical ISM.

High correlation between performance on a virtual-reality simulator and real-life cataract surgery.

PubMed

Thomsen, Ann Sofia Skou; Smith, Phillip; Subhi, Yousif; Cour, Morten la; Tang, Lilian; Saleh, George M; Konge, Lars

2017-05-01

To investigate the correlation in performance of cataract surgery between a virtual-reality simulator and real-life surgery using two objective assessment tools with evidence of validity. Cataract surgeons with varying levels of experience were included in the study. All participants performed and videorecorded three standard cataract surgeries before completing a proficiency-based test on the EyeSi virtual-reality simulator. Standard cataract surgeries were defined as: (1) surgery performed under local anaesthesia, (2) patient age >60 years, and (3) visual acuity >1/60 preoperatively. A motion-tracking score was calculated by multiplying average path length and average number of movements from the three real-life surgical videos of full procedures. The EyeSi test consisted of five abstract and two procedural modules: intracapsular navigation, antitremor training, intracapsular antitremor training, forceps training, bimanual training, capsulorhexis and phaco divide and conquer. Eleven surgeons were enrolled. After a designated warm-up period, the proficiency-based test on the EyeSi simulator was strongly correlated to real-life performance measured by motion-tracking software of cataract surgical videos with a Pearson correlation coefficient of -0.70 (p = 0.017). Performance on the EyeSi simulator is significantly and highly correlated to real-life surgical performance. However, it is recommended that performance assessments are made using multiple data sources. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

National standards for the long-term care ombudsman program and a tool to assess compliance: the Huber Badrak Borders Scales.

PubMed

Huber, R; Borders, K W; Badrak, K; Netting, F E; Nelson, H W

2001-04-01

We propose national standards previously recommended for the Long-Term Care Ombudsman Program by an Institute of Medicine program evaluation committee, and introduce a tool to measure the compliance of local ombudsman programs to those standards: the Huber Badrak Borders Scales. The best practices for ombudsman programs detailed in the committee's report were adapted to 43 Likert-type scales that were then averaged into 10 infrastructure component scales: (a) program structure, (b) qualifications of local ombudsmen, (c) legal authority, (d) financial resources, (e) management information systems, (f) legal resources, (g) human resources, (h) resident advocacy services, (i) systemic advocacy, and (j) educational services. The scales were pilot-tested in 1996 and 1999 with Kentucky ombudsmen. The means of 9 of these 10 scales were higher in 1999 than in 1996, suggesting that local ombudsman programs were more in compliance with the proposed standards in 1999 than three years earlier. The development process consisted of 10 adopt-test-revise-retest steps that can be replicated by other types of programs to develop program compliance tools.

Face recognition performance of individuals with Asperger syndrome on the Cambridge Face Memory Test.

PubMed

Hedley, Darren; Brewer, Neil; Young, Robyn

2011-12-01

Although face recognition deficits in individuals with Autism Spectrum Disorder (ASD), including Asperger syndrome (AS), are widely acknowledged, the empirical evidence is mixed. This in part reflects the failure to use standardized and psychometrically sound tests. We contrasted standardized face recognition scores on the Cambridge Face Memory Test (CFMT) for 34 individuals with AS with those for 42, IQ-matched non-ASD individuals, and age-standardized scores from a large Australian cohort. We also examined the influence of IQ, autistic traits, and negative affect on face recognition performance. Overall, participants with AS performed significantly worse on the CFMT than the non-ASD participants and when evaluated against standardized test norms. However, while 24% of participants with AS presented with severe face recognition impairment (>2 SDs below the mean), many individuals performed at or above the typical level for their age: 53% scored within +/- 1 SD of the mean and 9% demonstrated superior performance (>1 SD above the mean). Regression analysis provided no evidence that IQ, autistic traits, or negative affect significantly influenced face recognition: diagnostic group membership was the only significant predictor of face recognition performance. In sum, face recognition performance in ASD is on a continuum, but with average levels significantly below non-ASD levels of performance. Copyright © 2011, International Society for Autism Research, Wiley-Liss, Inc.

Does Assessment Type Matter? A Measurement Invariance Analysis of Online and Paper and Pencil Assessment of the Community Assessment of Psychic Experiences (CAPE)

PubMed Central

Vleeschouwer, Marloes; Schubart, Chris D.; Henquet, Cecile; Myin-Germeys, Inez; van Gastel, Willemijn A.; Hillegers, Manon H. J.; van Os, Jim J.; Boks, Marco P. M.; Derks, Eske M.

2014-01-01

Background The psychometric properties of an online test are not necessarily identical to its paper and pencil original. The aim of this study is to test whether the factor structure of the Community Assessment of Psychic Experiences (CAPE) is measurement invariant with respect to online vs. paper and pencil assessment. Method The factor structure of CAPE items assessed by paper and pencil (N = 796) was compared with the factor structure of CAPE items assessed by the Internet (N = 21,590) using formal tests for Measurement Invariance (MI). The effect size was calculated by estimating the Signed Item Difference in the Sample (SIDS) index and the Signed Test Difference in the Sample (STDS) for a hypothetical subject who scores 2 standard deviations above average on the latent dimensions. Results The more restricted Metric Invariance model showed a significantly worse fit compared to the less restricted Configural Invariance model (χ2(23) = 152.75, p<0.001). However, the SIDS indices appear to be small, with an average of −0.11. A STDS of −4.80 indicates that Internet sample members who score 2 standard deviations above average would be expected to score 4.80 points lower on the CAPE total scale (ranging from 42 to 114 points) than would members of the Paper sample with the same latent trait score. Conclusions Our findings did not support measurement invariance with respect to assessment method. Because of the small effect sizes, the measurement differences between the online assessed CAPE and its paper and pencil original can be neglected without major consequences for research purposes. However, a person with a high vulnerability for psychotic symptoms would score 4.80 points lower on the total scale if the CAPE is assessed online compared to paper and pencil assessment. Therefore, for clinical purposes, one should be cautious with online assessment of the CAPE. PMID:24465389

Maximum likelihood estimation for periodic autoregressive moving average models

USGS Publications Warehouse

Vecchia, A.V.

1985-01-01

A useful class of models for seasonal time series that cannot be filtered or standardized to achieve second-order stationarity is that of periodic autoregressive moving average (PARMA) models, which are extensions of ARMA models that allow periodic (seasonal) parameters. An approximation to the exact likelihood for Gaussian PARMA processes is developed, and a straightforward algorithm for its maximization is presented. The algorithm is tested on several periodic ARMA(1, 1) models through simulation studies and is compared to moment estimation via the seasonal Yule-Walker equations. Applicability of the technique is demonstrated through an analysis of a seasonal stream-flow series from the Rio Caroni River in Venezuela.

Multiplicative effects model with internal standard in mobile phase for quantitative liquid chromatography-mass spectrometry.

PubMed

Song, Mi; Chen, Zeng-Ping; Chen, Yao; Jin, Jing-Wen

2014-07-01

Liquid chromatography-mass spectrometry assays suffer from signal instability caused by the gradual fouling of the ion source, vacuum instability, aging of the ion multiplier, etc. To address this issue, in this contribution, an internal standard was added into the mobile phase. The internal standard was therefore ionized and detected together with the analytes of interest by the mass spectrometer to ensure that variations in measurement conditions and/or instrument have similar effects on the signal contributions of both the analytes of interest and the internal standard. Subsequently, based on the unique strategy of adding internal standard in mobile phase, a multiplicative effects model was developed for quantitative LC-MS assays and tested on a proof of concept model system: the determination of amino acids in water by LC-MS. The experimental results demonstrated that the proposed method could efficiently mitigate the detrimental effects of continuous signal variation, and achieved quantitative results with average relative predictive error values in the range of 8.0-15.0%, which were much more accurate than the corresponding results of conventional internal standard method based on the peak height ratio and partial least squares method (their average relative predictive error values were as high as 66.3% and 64.8%, respectively). Therefore, it is expected that the proposed method can be developed and extended in quantitative LC-MS analysis of more complex systems. Copyright © 2014 Elsevier B.V. All rights reserved.

Experiment on the concrete slab for floor vibration evaluation of deteriorated building

NASA Astrophysics Data System (ADS)

Hong, S. U.; Na, J. H.; Kim, S. H.; Lee, Y. T.

2014-08-01

Damages from noise and vibration are increasing every year, and most of which are noises between floors in deteriorated building caused by floor impact sound. In this study, the floor vibration of the deteriorated buildings constructed with the concrete slabs of thickness no more than 150 mm was evaluated by the vibration impact sound. This highly reliable study was conducted to assess floor vibration according with the serviceability evaluation standard of Reiher / Meister and Koch and vibration evaluation standard of ISO and AIJ. Designed pressure for the concrete slab sample of floor vibration assessment was 24MPa, and the sample was manufactured pursuant to KS F 2865 and JIS A 1440-2 with size of 3200 mm × 3200 mm × 140 mm. Tests were conducted twice with accelerometers, and Fast Fourier Transform was performed for comparative analysis by the vibration assessment criteria. The peak displacement from Test 1 was in the range of 0.00869 - 0.02540 mm; the value of peak frequency ranged from 18 to 27 Hz, and the average value was 22Hz. The peak acceleration value from Test 2 was in the range of 0.47 - 1.07 % g; the value of peak frequency was 18.5 - 22.57 Hz, and the average was 21Hz. The vibration was apparently recognizable in most cases according to the Reiher/Meister standard. In case of Koch graph for the damage assessment of the structure, the vibration was at the medium level and causes no damage to the building structure. The measured vibration results did not exceed the damage limit or serviceability limit of building according to the vibration assessment criteria of ISO and residential assessment guidelines provided by Architectural Institute of Japan (AIJ).

Outdoor performance results for NBS Round Robin collector no. 1

NASA Technical Reports Server (NTRS)

Miller, D. R.

1976-01-01

The efficiency of a PPG flat-plate solar collector was evaluated utilizing an outdoor solar collector test facility at the NASA-Lewis Research Center, as part of the National Bureau of Standards 'round robin' collector test program. The correlation equation for collector thermal efficiency Eta curve fit of the data was: Eta = 0.666 - 1.003(Btu/hr-sq ft-F) Theta, where the parameter Theta is the difference between the average fluid temperature and the ambient temperature, all divided by the total flux impinging on the collector.

The Effect of Insertion Technique on Temperatures for Standard and Self-Drilling External Fixation Pins.

PubMed

Manoogian, Sarah; Lee, Adam K; Widmaier, James C

2017-08-01

No studies have assessed the effects of parameters associated with insertion temperature in modern self-drilling external fixation pins. The current study assessed how varying the presence of irrigation, insertion speed, and force impacted the insertion temperatures of 2 types of standard and self-drilling external fixation half pins. Seventy tests were conducted with 10 trials for 4 conditions on self-drilling pins, and 3 conditions for standard pins. Each test used a thermocouple inside the pin to measure temperature rise during insertion. Adding irrigation to the standard pin insertion significantly lowered the maximum temperature (P <0.001). Lowering the applied force for the standard pin did not have a significant change in temperature rise. Applying irrigation during the self-drilling pin tests dropped average rise in temperature from 151.3 ± 21.6°C to 124.1 ± 15.3°C (P = 0.005). When the self-drilling pin insertion was decreased considerably from 360 to 60 rpm, the temperature decreased significantly from 151.3 ± 21.6°C to 109.6 ± 14.0°C (P <0.001). When the force applied increased significantly, the corresponding self-drilling pin temperature increase was not significant. The standard pin had lower peak temperatures than the self-drilling pin for all conditions. Moreover, slowing down the insertion speed and adding irrigation helped mitigate the temperature increase of both pin types during insertion.

Influence of Exposure to Intense Sunlight on Subsequent Night Vision. M and S Research Project number X-442 (AV-233-W)

DTIC Science & Technology

1945-04-26

England, and compared the speed of their dark adaptation after exposure to a standard illumination with a similar test after staying indoors on a dull ... skylight dark adaptation is considerably delayed. Far from being over in 30 minutes. dark adaptation may not be complete for two hours. An average of all

Nebraska State Report Card, 1999-2000 = Tarjeta informativa del Estado de Nebraska, 1999-2000.

ERIC Educational Resources Information Center

Nebraska State Dept. of Education, Lincoln.

This report, printed in English and Spanish versions, is the first Nebraska State Report Card. It provides a snapshot of Nebraska schools using statewide averages. Nebraska students scored better than students nationwide in reading, with 60% of Nebraska students in grades 3-4, 7-8, and 10-12 scoring above the median on a standardized reading test.…

40 CFR Appendix A-7 to Part 60 - Test Methods 19 through 25E

Code of Federal Regulations, 2014 CFR

2014-07-01

... %O include the unavailable hydrogen and oxygen in the form of H2O.) 12.3.2.2 Use applicable sampling... are used during the averaging period. 12.5.2.1 Solid Fossil (Including Waste) Fuel/Sampling and... of the standards) on a dry basis for each gross sample. 12.5.2.2 Liquid Fossil Fuel-Sampling and...

The Role of Racial Identity, Academic Self-Concept, and Self-Esteem in the Prediction of Academic Outcomes for African American Students

ERIC Educational Resources Information Center

Awad, Germine H.

2007-01-01

The purpose of the present study was to examine the extent to which racial identity, academic self-concept, and self-esteem predict two types of academic outcomes, grade point average (GPA), and verbal Graduate Record Examination scores. Although grades and standardized test performance are often collapsed under the category of academic…

Integrated Data Collection Analysis (IDCA) Program - Statistical Analysis of RDX Standard Data Sets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandstrom, Mary M.; Brown, Geoffrey W.; Preston, Daniel N.

2015-10-30

The Integrated Data Collection Analysis (IDCA) program is conducting a Proficiency Test for Small- Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are statistical analyses of the results for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of the RDX Type II Class 5 standard. The material was tested as a well-characterized standard several times during the proficiency study to assess differences among participants and the range of results that may arise for well-behaved explosive materials. The analyses show that there are detectable differences among the results from IDCA participants. While these differences are statisticallymore » significant, most of them can be disregarded for comparison purposes to assess potential variability when laboratories attempt to measure identical samples using methods assumed to be nominally the same. The results presented in this report include the average sensitivity results for the IDCA participants and the ranges of values obtained. The ranges represent variation about the mean values of the tests of between 26% and 42%. The magnitude of this variation is attributed to differences in operator, method, and environment as well as the use of different instruments that are also of varying age. The results appear to be a good representation of the broader safety testing community based on the range of methods, instruments, and environments included in the IDCA Proficiency Test.« less

Clinical longitudinal standards for height, weight, height velocity, weight velocity, and stages of puberty.

PubMed Central

Tanner, J M; Whitehouse, R H

1976-01-01

New charts for height, weight, height velocity, and weight velocity are presented for clinical (as opposed to population survey) use. They are based on longitudinal-type growth curves, using the same data as in the British 1965 growth standards. In the velocity standards centiles are given for children who are early- and late-maturing as well as for those who mature at the average age (thus extending the use of the previous charts). Limits of normality for the age of occurrence of the adolescent growth spurt are given and also for the successive stages of penis, testes, and pubic hair development in boys, and for stages of breast and pubic hair development in girls. PMID:952550

We-Measure: Toward a low-cost portable posturography for patients with multiple sclerosis using the commercial Wii balance board.

PubMed

Castelli, Letizia; Stocchi, Luca; Patrignani, Maurizio; Sellitto, Giovanni; Giuliani, Manuela; Prosperini, Luca

2015-12-15

This study was aimed at investigating whether postural sway measures derived from a standard force platform were similar to those generated by a custom-written software ("We-Measure") acquiring and processing data from a commercial Nintendo balance board (BB). For this purpose, 90 patients with multiple sclerosis (MS) and 50 healthy controls (HC) were tested in a single-day session with a reference standard force platform and a BB-based system. Despite its acceptable between-device agreement (tested by visual evaluation of Bland-Altman plot), the low-cost BB-based system tended to overestimate postural sway when compared to the reference standard force platform in both MS and HC groups (on average +30% and +54%, respectively). Between-device reliability was just adequate (MS: 66%, HC: 47%), while test-retest reliability was excellent (MS: 84%, HC: 88%). Concurrent validity evaluation showed similar performance between the reference standard force platform and the BB-based system in discriminating fallers and non-fallers among patients with MS. All these findings may encourage the use of this balance board-based new device in longitudinal study, rather than in cross-sectional design, thus providing a potential useful tool for multicenter settings. Copyright © 2015 Elsevier B.V. All rights reserved.

SU-F-T-481: Physics Evaluation of a Newly Released InCise™ Multileaf Collimator for CyberKnife M6™ System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L; Chin, E; Lo, A

2016-06-15

Purpose: This work reports the results of the physics evaluation of a newly released InCise™2 Multileaf Collimator (MLC) installed in our institution. Methods: Beam property data was measured with unshielded diode and EBT2 films. The measurements included MLC leaf transmission, beam profiles, output factors and tissue-phantom ratios. MLC performance was evaluated for one month after commissioning. Weekly Garden Fence tests were performed for leaf / bank positioning in standard (A/P) and clinically relevant non-standard positions, before and after MLC driving exercises of 10+ minutes. Daily Picket Fence test and AQA test, End-to-End tests and dosimetric quality assurance were performed tomore » evaluate the overall system performance. Results: All measurements including beam energy, flatness and symmetry, were within manufacture specifications. Leaf transmission was 0.4% <0.5% specification. The values of output factors ranged from 0.825 (7.6 mm × 7.5 mm) to 1.026 (115.0 mm × 100.1 mm). Average beam penumbra at 10 cm depth ranged from 2.7mm/2.7mm(7.6 mm × 7.5 mm) to 6.0 mm/6.2mm(84.6 mm × 84.7 mm). Slight penumbra difference (<10% from average penumbra for fields >20 mm) was observed in the direction perpendicular to leaf motion due to the tilting of the leaf housing. Mean leaf position offsets was −0.08±0.07mm and −0.13 ± 0.08 for X1 and X2 leaf banks in 13 Garden Fence tests. No significant difference on average leaf positioning offsets was observed between different leaf orientations and before/after MLC driving exercises. Six End-to-End tests showed 0.43±0.23mm overall targeting accuracy. Picket-Fence and AQA showed stable performance of MLC during the test period. Dosimetric point dose measurements for test cases agreed with calculation within 3%. All film measurements on relative dose had Gamma (2%, 2mm) passing rate of >95%. Conclusion: The Incise™2 MLC for CyberKnife M6™ was proven to be accurate and reliable, and it is currently in clinical use. Stanford was one of the physics evaluation sites for the newly released InCise 2 MLC for Accuray Inc.« less

The impact of testing accommodations on MCAT scores: descriptive results.

PubMed

Julian, Ellen R; Ingersoll, Deborah J; Etienne, Patricia M; Hilger, Anthony E

2004-04-01

Medical College Admission Test (MCAT) examinees with disabilities who receive accommodations receive flagged scores indicating nonstandard administration. This report compares MCAT examinees who received accommodations and their performances with standard examinees. Aggregate history records of all 1994-2000 MCAT examinees were identified as flagged (2,401) or standard (297,880), then further sorted by race/ethnicity (broadly identified as underrepresented minority and non-URM, at the time of testing) and gender. Those with flagged scores were also classified by disability (LD = learning disability, ADHD = attention deficit hyperactivity disorder, LD/ADHD = learning disability and attention deficit hyperactivity disorder, and Other = other disability) and type of accommodation. Mean MCAT scores were calculated for all groups. A group of 866 examinees took the MCAT first as a standard administration and subsequently with accommodations. In a separate analysis, their two sets of scores were compared. Less than 1% of examinees (2,401) had accommodations; of these, 55% were LD, 17% ADHD, 5% LD/ADHD, and 23% Other. Extended time was the most frequently provided accommodation. Mean flagged scores slightly exceeded mean standard scores on all MCAT sections. Examinees who retook the MCAT with accommodations after a standard administration increased their scores by six points, quadrupling the average gain Standard-Standard retest cohort from another study. The small but statistically significant different higher flagged scores may reflect either appropriate compensation or overly generous accommodations. Extended time had a positive impact on the scores of those who retested with this accommodation. The validity the flagged MCAT in predicting success in medical school is not known, and further investigation is underway.

Evaluating multicenter DTI data in Huntington's disease on site specific effects: An ex post facto approach☆

PubMed Central

Müller, Hans-Peter; Grön, Georg; Sprengelmeyer, Reiner; Kassubek, Jan; Ludolph, Albert C.; Hobbs, Nicola; Cole, James; Roos, Raymund A.C.; Duerr, Alexandra; Tabrizi, Sarah J.; Landwehrmeyer, G. Bernhard; Süssmuth, Sigurd D.

2013-01-01

Purpose Assessment of the feasibility to average diffusion tensor imaging (DTI) metrics of MRI data acquired in the course of a multicenter study. Materials and methods Sixty-one early stage Huntington's disease patients and forty healthy controls were studied using four different MR scanners at four European sites with acquisition protocols as close as possible to a given standard protocol. The potential and feasibility of averaging data acquired at different sites was evaluated quantitatively by region-of-interest (ROI) based statistical comparisons of coefficients of variation (CV) across centers, as well as by testing for significant group-by-center differences on averaged fractional anisotropy (FA) values between patients and controls. In addition, a whole-brain based statistical between-group comparison was performed using FA maps. Results The ex post facto statistical evaluation of CV and FA-values in a priori defined ROIs showed no differences between sites above chance indicating that data were not systematically biased by center specific factors. Conclusion Averaging FA-maps from DTI data acquired at different study sites and different MR scanner types does not appear to be systematically biased. A suitable recipe for testing on the possibility to pool multicenter DTI data is provided to permit averaging of DTI-derived metrics to differentiate patients from healthy controls at a larger scale. PMID:24179771

40 CFR 86.1865-12 - How to comply with the fleet average CO2 standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of § 86.1801-12(j), CO2 fleet average exhaust emission standards apply to: (i) 2012 and later model... businesses meeting certain criteria may be exempted from the greenhouse gas emission standards in § 86.1818... standards applicable in a given model year are calculated separately for passenger automobiles and light...

Cost Comparison of Fundamentals of Laparoscopic Surgery Training Completed With Standard Fundamentals of Laparoscopic Surgery Equipment versus Low-Cost Equipment.

PubMed

Franklin, Brenton R; Placek, Sarah B; Wagner, Mercy D; Haviland, Sarah M; O'Donnell, Mary T; Ritter, E Matthew

Training for the Fundamentals of Laparoscopic Surgery (FLS) skills test can be expensive. Previous work demonstrated that training on an ergonomically different, low-cost platform does not affect FLS skills test outcomes. This study compares the average training cost with standard FLS equipment and medical-grade consumables versus training on a lower cost platform with non-medical-grade consumables. Subjects were prospectively randomized to either the standard FLS training platform (n = 19) with medical-grade consumables (S-FLS), or the low-cost platform (n = 20) with training-grade products (LC-FLS). Both groups trained to proficiency using previously established mastery learning standards on the 5 FLS tasks. The fixed and consumable cost differences were compared. Training occurred in a surgical simulation center. Laparoscopic novice medical student and resident physician health care professionals who had not completed the national FLS proficiency curriculum and who had performed less than 10 laparoscopic cases. The fixed cost of the platform was considerably higher in the S-FLS group (S-FLS, $3360; LC-FLS, $879), and the average consumable training cost was significantly higher for the S-FLS group (S-FLS, $1384.52; LC-FLS, $153.79; p < 0.001). The LC-FLS group had a statistically discernable cost reduction for each consumable (Gauze $9.24 vs. $0.39, p = 0.002; EndoLoop $540.00 vs. $40.60, p < 0.001; extracorporeal suture $216.45 vs. $25.20, p < 0.001; intracorporeal suture $618.83 vs. $87.60, p < 0.001). The annual fixed and consumable cost to train 5 residents is $10,282.60 in the S-FLS group versus $1647.95 in the LC-FLS group. This study shows that the average cost to train a single trainee to proficiency using a lower fixed-cost platform and non-medical-grade equipment results in significant financial savings. A 5-resident program will save approximately $8500 annually. Residency programs should consider adopting this strategy to reduce the cost of FLS training. Published by Elsevier Inc.

Evaluation of Exhaust Emissions from Three Diesel-Hybrid Cars and Simulation of After-Treatment Systems for Ultralow Real-World NOx Emissions.

PubMed

Franco, Vicente; Zacharopoulou, Theodora; Hammer, Jan; Schmidt, Helge; Mock, Peter; Weiss, Martin; Samaras, Zissis

2016-12-06

Hybridization offers great potential for decreasing pollutant and carbon dioxide emissions of diesel cars. However, an assessment of the real-world emissions performance of modern diesel hybrids is missing. Here, we test three diesel-hybrid cars on the road and benchmark our findings with two cars against tests on the chassis dynamometer and model simulations. The pollutant emissions of the two cars tested on the chassis dynamometer were in compliance with the relevant Euro standards over the New European Driving Cycle and Worldwide harmonized Light vehicles Test Procedure. On the road, all three diesel-hybrids exceeded the regulatory NO x limits (average exceedance for all trips: +150% for the Volvo, +510% for the Peugeot, and +550% for the Mercedes-Benz) and also showed elevated on-road CO 2 emissions (average exceedance of certification values: +178, +77, and +52%, respectively). These findings point to a wide discrepancy between certified and on-road CO 2 and suggest that hybridization alone is insufficient to achieve low-NO x emissions of diesel powertrains. Instead, our simulation suggests that properly calibrated selective catalytic reduction filter and lean-NO x trap after-treatment technologies can reduce the on-road NO x emissions to 0.023 and 0.068 g/km on average, respectively, well below the Euro 6 limit (0.080 g/km).

Noise pollution in intensive care units and emergency wards.

PubMed

Khademi, Gholamreza; Roudi, Masoumeh; Shah Farhat, Ahmad; Shahabian, Masoud

2011-01-01

The improvement of technology has increased noise levels in hospital Wards to higher than international standard levels (35-45 dB). Higher noise levels than the maximum level result in patient's instability and dissatisfaction. Moreover, it will have serious negative effects on the staff's health and the quality of their services. The purpose of this survey is to analyze the level of noise in intensive care units and emergency wards of the Imam Reza Teaching Hospital, Mashhad. This research was carried out in November 2009 during morning shifts between 7:30 to 12:00. Noise levels were measured 10 times at 30-minute intervals in the nursing stations of 10 wards of the emergency, the intensive care units, and the Nephrology and Kidney Transplant Departments of Imam Reza University Hospital, Mashhad. The noise level in the nursing stations was tested for both the maximum level (Lmax) and the equalizing level (Leq). The research was based on the comparison of equalizing levels (Leq) because maximum levels were unstable. In our survey the average level (Leq) in all wards was much higher than the standard level. The maximum level (Lmax) in most wards was 85-86 dB and just in one measurement in the Internal ICU reached 94 dB. The average level of Leq in all wards was 60.2 dB. In emergency units, it was 62.2 dB, but it was not time related. The highest average level (Leq) was measured at 11:30 AM and the peak was measured in the Nephrology nursing station. The average levels of noise in intensive care units and also emergency wards were more than the standard levels and as it is known these wards have vital roles in treatment procedures, so more attention is needed in this area.

Performance parameters and post exercise heart rate recovery in Warmblood sports horses of different performance levels.

PubMed

Bitschnau, C; Wiestner, T; Trachsel, D S; Auer, J A; Weishaupt, M A

2010-11-01

Standardised exercise tests are used for fitness evaluation of sports horses. Standards are described for Thoroughbreds and Standardbreds; however, limited information is available for Warmbloods. To establish normative standards of performance parameters and heart rate recovery (HRR) in Warmblood riding horses of different levels of fitness using a submaximal incremental exercise test (SIET) performed on a treadmill. A SIET was carried out with 29 healthy and treadmill-accustomed Warmbloods: eleven 3-day event horses (TDE) and 18 horses from the National Equestrian Centre (NEC) competing in amateur jumping and/or dressage events. After a warm-up phase, horses performed 2 stages at trot and 3-5 stages at gallop at 6% incline. The first stage lasted 120 s, all others 90 s. Velocity (V) and heart rate (HR) were measured continuously and blood lactate concentration (LAC) at the end of each exercise stage. V at HR 150 and 200 beats/min (V(150), V(200)), V and HR at 2 and 4 mmol/l LAC (V(2), V(4) and HR(2), HR(4), respectively) were calculated and compared between discipline groups. For reference values, horses were divided on the basis of the V(4) -results in good (GP) and average performers (AP) (performance groups). Five minute passive HRR was compared between performance groups. Fifteen NEC horses were retested within 1-3 months. Groups were compared with t tests and P < 0.05 considered significant. Three-day event horses had higher V(150), V(2) and V(4) values than NEC. GP had higher values in all performance parameters compared to AP. No differences were found between test and retest. GP mean recovery HR was different from that of AP from 120 s of recovery onwards. Treadmill SIETs are suitable to objectify aerobic capacity in Warmblood riding horses. Normative standards were assessed for well and averagely-trained horses. The results can be referred to when diagnosing patients with exercise intolerance. © 2010 EVJ Ltd.

Department of Transportation, National Highway Traffic Safety Administration : light truck average fuel economy standard, model year 1999

DOT National Transportation Integrated Search

1997-04-18

Section 32902(a) of title 49, United States Code, requires the Secretary of Transportation to prescribe by regulation, at least 18 months in advance of each model year, average fuel economy standards (known as "Corporate Average Fuel Economy" or "CAF...

49 CFR 525.6 - Requirements for petition.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.6 Requirements... arguments of the petitioner supporting the exemption and alternative average fuel economy standard requested...

49 CFR 531.5 - Fuel economy standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS § 531.5 Fuel... automobiles shall comply with the average fuel economy standards in Table I, expressed in miles per gallon, in... passenger automobile fleet shall comply with the fuel economy level calculated for that model year according...

49 CFR 531.5 - Fuel economy standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS § 531.5 Fuel... automobiles shall comply with the average fuel economy standards in Table I, expressed in miles per gallon, in... passenger automobile fleet shall comply with the fuel economy level calculated for that model year according...

The English-Language and Reading Achievement of a Cohort of Deaf Students Speaking and Signing Standard English: A Preliminary Study.

PubMed

Nielsen, Diane Corcoran; Luetke, Barbara; McLean, Meigan; Stryker, Deborah

2016-01-01

Research suggests that English-language proficiency is critical if students who are deaf or hard of hearing (D/HH) are to read as their hearing peers. One explanation for the traditionally reported reading achievement plateau when students are D/HH is the inability to hear insalient English morphology. Signing Exact English can provide visual access to these features. The authors investigated the English morphological and syntactic abilities and reading achievement of elementary and middle school students at a school using simultaneously spoken and signed Standard American English facilitated by intentional listening, speech, and language strategies. A developmental trend (and no plateau) in language and reading achievement was detected; most participants demonstrated average or above-average English. Morphological awareness was prerequisite to high test scores; speech was not significantly correlated with achievement; language proficiency, measured by the Clinical Evaluation of Language Fundamentals-4 (Semel, Wiig, & Secord, 2003), predicted reading achievement.

A refined method for multivariate meta-analysis and meta-regression

PubMed Central

Jackson, Daniel; Riley, Richard D

2014-01-01

Making inferences about the average treatment effect using the random effects model for meta-analysis is problematic in the common situation where there is a small number of studies. This is because estimates of the between-study variance are not precise enough to accurately apply the conventional methods for testing and deriving a confidence interval for the average effect. We have found that a refined method for univariate meta-analysis, which applies a scaling factor to the estimated effects’ standard error, provides more accurate inference. We explain how to extend this method to the multivariate scenario and show that our proposal for refined multivariate meta-analysis and meta-regression can provide more accurate inferences than the more conventional approach. We explain how our proposed approach can be implemented using standard output from multivariate meta-analysis software packages and apply our methodology to two real examples. © 2013 The Authors. Statistics in Medicine published by John Wiley & Sons, Ltd. PMID:23996351

[Cost-effectiveness analysis of HIV testing strategy in hospitals from 2006 to 2010 in Guangzhou].

PubMed

Xin, Qian-qian; Xu, Hui-fang; Liang, Cai-yun; Han, Zhi-gang; Zeng, Gang; Xu, Peng; Wang, Ming; Lü, Fan

2013-06-01

To evaluate the cost effectiveness of HIV testing strategy in hospitals from 2006 to 2010 in Guangzhou. According to the HIV test strategy costs and the number of HIV patients found in Guangzhou, following aspects were calculated as the total cost of HIV testing strategy in hospitals from 2006 to 2010 of Guangzhou, the cost of finding each HIV patient, and the cost of obtaining one quality adjusted life year (QALY) using Markov model. The total HIV test strategy costs increased from 11 106.98 thousand Yuan to 25 105.58 thousand Yuan, and 4599 HIV positive patients were found due to this strategy. The cost-effectiveness of HIV testing were different in hospitals from 2006 to 2010 in Guangzhou. The lowest cost-effectiveness ratio of HIV testing strategy was 11 810 Yuan per HIV positive patient, the highest was 23 510 Yuan, and the average was 16 070 Yuan. According to the Markov model result, 7.2855 QALYs could be gained per HIV patient on average via HIV testing strategy in 113 hospitals in Guangzhou, and the cost of obtaining one QALY was 2210 Yuan. The cost effectiveness ratio of HIV testing strategy in hospitals in Guangzhou was significantly lower than the standard of WHO recommended, and it was cost-effective to carry out the HIV testing strategy in Guangzhou.

Using scientific evidence to improve hospital library services: Southern Chapter/Medical Library Association journal usage study.

PubMed

Dee, C R; Rankin, J A; Burns, C A

1998-07-01

Journal usage studies, which are useful for budget management and for evaluating collection performance relative to library use, have generally described a single library or subject discipline. The Southern Chapter/Medical Library Association (SC/MLA) study has examined journal usage at the aggregate data level with the long-term goal of developing hospital library benchmarks for journal use. Thirty-six SC/MLA hospital libraries, categorized for the study by size as small, medium, or large, reported current journal title use centrally for a one-year period following standardized data collection procedures. Institutional and aggregate data were analyzed for the average annual frequency of use, average costs per use and non-use, and average percent of non-used titles. Permutation F-type tests were used to measure difference among the three hospital groups. Averages were reported for each data set analysis. Statistical tests indicated no significant differences between the hospital groups, suggesting that benchmarks can be derived applying to all types of hospital libraries. The unanticipated lack of commonality among heavily used titles pointed to a need for uniquely tailored collections. Although the small sample size precluded definitive results, the study's findings constituted a baseline of data that can be compared against future studies.

Using scientific evidence to improve hospital library services: Southern Chapter/Medical Library Association journal usage study.

PubMed Central

Dee, C R; Rankin, J A; Burns, C A

1998-01-01

BACKGROUND: Journal usage studies, which are useful for budget management and for evaluating collection performance relative to library use, have generally described a single library or subject discipline. The Southern Chapter/Medical Library Association (SC/MLA) study has examined journal usage at the aggregate data level with the long-term goal of developing hospital library benchmarks for journal use. METHODS: Thirty-six SC/MLA hospital libraries, categorized for the study by size as small, medium, or large, reported current journal title use centrally for a one-year period following standardized data collection procedures. Institutional and aggregate data were analyzed for the average annual frequency of use, average costs per use and non-use, and average percent of non-used titles. Permutation F-type tests were used to measure difference among the three hospital groups. RESULTS: Averages were reported for each data set analysis. Statistical tests indicated no significant differences between the hospital groups, suggesting that benchmarks can be derived applying to all types of hospital libraries. The unanticipated lack of commonality among heavily used titles pointed to a need for uniquely tailored collections. CONCLUSION: Although the small sample size precluded definitive results, the study's findings constituted a baseline of data that can be compared against future studies. PMID:9681164

Effects of Topic Familiarity and Training in Generative Learning Activities on Poor Readers' Comprehension of Comparison/Contrast Expository Text Structure: Transfer to Real-World Materials.

ERIC Educational Resources Information Center

Weisberg, Renee; Balajthy, Ernest

A study investigated transfer effects of training below average high school readers in the use of graphic organizers and summary writing on their recognition of compare/contrast text structure. Subjects, 32 high school students with below-expectancy standardized test scores, were placed in two groups: an experimental group (five males and 11…

Failure to Apply the Flynn Correction in Death Penalty Litigation: Standard Practice of Today Maybe, but Certainly Malpractice of Tomorrow

ERIC Educational Resources Information Center

Reynolds, Cecil R.; Niland, John; Wright, John E.; Rosenn, Michal

2010-01-01

The Flynn Effect is a well documented phenomenon demonstrating score increases on IQ measures over time that average about 0.3 points per year. Normative adjustments to scores derived from IQ measures normed more than a year or so prior to the time of testing an individual have become controversial in several settings but especially so in matters…

The Speech Intelligibility Index and the pure-tone average as predictors of lexical ability in children fit with hearing AIDS.

PubMed

Stiles, Derek J; Bentler, Ruth A; McGregor, Karla K

2012-06-01

To determine whether a clinically obtainable measure of audibility, the aided Speech Intelligibility Index (SII; American National Standards Institute, 2007), is more sensitive than the pure-tone average (PTA) at predicting the lexical abilities of children who wear hearing aids (CHA). School-age CHA and age-matched children with normal hearing (CNH) repeated words and nonwords, learned novel words, and completed a standardized receptive vocabulary test. Analyses of covariance allowed comparison of the 2 groups. For CHA, regression analyses determined whether SII held predictive value over and beyond PTA. CHA demonstrated poorer performance than CNH on tests of word and nonword repetition and receptive vocabulary. Groups did not differ on word learning. Aided SII was a stronger predictor of word and nonword repetition and receptive vocabulary than PTA. After accounting for PTA, aided SII remained a significant predictor of nonword repetition and receptive vocabulary. Despite wearing hearing aids, CHA performed more poorly on 3 of 4 lexical measures. Individual differences among CHA were predicted by aided SII. Unlike PTA, aided SII incorporates hearing aid amplification characteristics and speech-frequency weightings and may provide a more valid estimate of the child's access to and ability to learn from auditory input in real-world environments.

Evaluation of the VIDAS Listeria (LIS) immunoassay for the detection of Listeria in foods using demi-Fraser and Fraser enrichment broths, as modification of AOAC Official Method 999.06 (AOAC Official Method 2004.06).

PubMed

Silbernagel, Karen M; Jechorek, Robert P; Kaufer, Amanda L; Johnson, Ronald L; Aleo, V; Brown, B; Buen, M; Buresh, J; Carson, M; Franklin, J; Ham, P; Humes, L; Husby, G; Hutchins, J; Jechorek, R; Jenkins, J; Kaufer, A; Kexel, N; Kora, L; Lam, L; Lau, D; Leighton, S; Loftis, M; Luc, S; Martin, J; Nacar, I; Nogle, J; Park, J; Schultz, A; Seymore, D; Smith, C; Smith, J; Thou, P; Ulmer, M; Voss, R; Weaver, V

2005-01-01

A multilaboratory study was conducted to compare the VIDAS LIS immunoassay with the standard cultural methods for the detection of Listeria in foods using an enrichment modification of AOAC Official Method 999.06. The modified enrichment protocol was implemented to harmonize the VIDAS LIS assay with the VIDAS LMO2 assay. Five food types--brie cheese, vanilla ice cream, frozen green beans, frozen raw tilapia fish, and cooked roast beef--at 3 inoculation levels, were analyzed by each method. A total of 15 laboratories representing government and industry participated. In this study, 1206 test portions were tested, of which 1170 were used in the statistical analysis. There were 433 positive by the VIDAS LIS assay and 396 positive by the standard culture methods. A Chi-square analysis of each of the 5 food types, at the 3 inoculation levels tested, was performed. The resulting average Chi square analysis, 0.42, indicated that, overall, there are no statistical differences between the VIDAS LIS assay and the standard methods at the 5% level of significance.

Determination of Glucosamine in Raw Materials and Dietary Supplements Containing Glucosamine Sulfate and/or Glucosamine Hydrochloride by High-Performance Liquid Chromatography with FMOC-Su Derivatization: Collaborative Study

PubMed Central

Zhou, Joseph Ziqi; Waszkuc, Ted; Mohammed, Felicia

2008-01-01

A collaborative study was conducted for determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid Chromatography (HPLC) with N-(9-fluorenyl-methoxycarbonyloxy) succinimide (FMOC-Su) derivatization. Thirteen blind materials, one pair of which were duplicates, were tested by 12 collaborating laboratories. The test samples consisted of various commercial products, including tablets, capsules, drink mix, and liquids as well as raw materials, blanks, and those for spike recovery analyses. The tests with blank products and products spiked with glucosamine showed good specificity of the method. The average recoveries at spike levels of 100 and 150% of the declared amount were 99.0% with a relative standard deviation (RSD) of 2.1%, and 101% with an RSD of 2.3%, respectively. The test results between laboratories on each commercial product were reproducible with RSD values of no more than 4.0%, and the results were repeatable in the same laboratory with an average RSD of 0.7%. HorRat values ranged from 0.5 to 1.7 on both tests of spike recovery and reproducibility between laboratories on commercial products. The average determination coefficient of the calibration curves from the laboratories was 0.9995 with an RSD of 0.03%. All of the 12 collaborating laboratories succeeded in the study and none of their reported test results were outliers, partly indicating the robustness of the method. It is recommended that the method be accepted by AOAC INTERNATIONAL as Official First Action. PMID:16152919

Evaluation of pump pulsation in respirable size-selective sampling: Part III. Investigation of European standard methods.

PubMed

Soo, Jhy-Charm; Lee, Eun Gyung; Lee, Larry A; Kashon, Michael L; Harper, Martin

2014-10-01

Lee et al. (Evaluation of pump pulsation in respirable size-selective sampling: part I. Pulsation measurements. Ann Occup Hyg 2014a;58:60-73) introduced an approach to measure pump pulsation (PP) using a real-world sampling train, while the European Standards (EN) (EN 1232-1997 and EN 12919-1999) suggest measuring PP using a resistor in place of the sampler. The goal of this study is to characterize PP according to both EN methods and to determine the relationship of PP between the published method (Lee et al., 2014a) and the EN methods. Additional test parameters were investigated to determine whether the test conditions suggested by the EN methods were appropriate for measuring pulsations. Experiments were conducted using a factorial combination of personal sampling pumps (six medium- and two high-volumetric flow rate pumps), back pressures (six medium- and seven high-flow rate pumps), resistors (two types), tubing lengths between a pump and resistor (60 and 90 cm), and different flow rates (2 and 2.5 l min(-1) for the medium- and 4.4, 10, and 11.2 l min(-1) for the high-flow rate pumps). The selection of sampling pumps and the ranges of back pressure were based on measurements obtained in the previous study (Lee et al., 2014a). Among six medium-flow rate pumps, only the Gilian5000 and the Apex IS conformed to the 10% criterion specified in EN 1232-1997. Although the AirChek XR5000 exceeded the 10% limit, the average PP (10.9%) was close to the criterion. One high-flow rate pump, the Legacy (PP=8.1%), conformed to the 10% criterion in EN 12919-1999, while the Elite12 did not (PP=18.3%). Conducting supplemental tests with additional test parameters beyond those used in the two subject EN standards did not strengthen the characterization of PPs. For the selected test conditions, a linear regression model [PPEN=0.014+0.375×PPNIOSH (adjusted R2=0.871)] was developed to determine the PP relationship between the published method (Lee et al., 2014a) and the EN methods. The 25% PP criterion recommended by Lee et al. (2014a), average value derived from repetitive measurements, corresponds to 11% PPEN. The 10% pass/fail criterion in the EN Standards is not based on extensive laboratory evaluation and would unreasonably exclude at least one pump (i.e. AirChek XR5000 in this study) and, therefore, the more accurate criterion of average 11% from repetitive measurements should be substituted. This study suggests that users can measure PP using either a real-world sampling train or a resistor setup and obtain equivalent findings by applying the model herein derived. The findings of this study will be delivered to the consensus committees to be considered when those standards, including the EN 1232-1997, EN 12919-1999, and ISO 13137-2013, are revised. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

Intrarater reliability of the Humac NORM isokinetic dynamometer for strength measurements of the knee and shoulder muscles.

PubMed

Habets, Bas; Staal, J Bart; Tijssen, Marsha; van Cingel, Robert

2018-01-10

To determine the intrarater reliability of the Humac NORM isokinetic dynamometer for concentric and eccentric strength tests of knee and shoulder muscles. 54 participants (50% female, average age 20.9 ± 3.1 years) performed concentric and eccentric strength measures of the knee extensors and flexors, and the shoulder internal and external rotators on two different Humac NORM isokinetic dynamometers, which were situated at two different centers. The knee extensors and flexors were tested concentrically at 60° and 180°/s, and eccentrically at 60° s. Concentric strength of the shoulder internal and external rotators, and eccentric strength of the external rotators were measured at 60° and 120°/s. We calculated intraclass correlation coefficients (ICCs), standard error of measurement, standard error of measurement expressed as a %, and the smallest detectable change to determine reliability and measurement error. ICCs for the knee tests ranged from 0.74 to 0.89, whereas ICC values for the shoulder tests ranged from 0.72 to 0.94. Measurement error was highest for the concentric test of the knee extensors and lowest for the concentric test of shoulder external rotators.

The joint use of the tangential electric field and surface Laplacian in EEG classification.

PubMed

Carvalhaes, C G; de Barros, J Acacio; Perreau-Guimaraes, M; Suppes, P

2014-01-01

We investigate the joint use of the tangential electric field (EF) and the surface Laplacian (SL) derivation as a method to improve the classification of EEG signals. We considered five classification tasks to test the validity of such approach. In all five tasks, the joint use of the components of the EF and the SL outperformed the scalar potential. The smallest effect occurred in the classification of a mental task, wherein the average classification rate was improved by 0.5 standard deviations. The largest effect was obtained in the classification of visual stimuli and corresponded to an improvement of 2.1 standard deviations.

49 CFR 525.8 - Processing of petitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.8 Processing of... establishment of an alternative average fuel economy standard, or the proposed denial of the petition, specifies... fuel economy standard or the denial of the petition, and the reasons for the decision. (Sec. 301, Pub...

40 CFR 63.5710 - How do I demonstrate compliance using emissions averaging?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Open... section to compute the weighted-average MACT model point value for each open molding resin and gel coat...

Testing of Visual Field with Virtual Reality Goggles in Manual and Visual Grasp Modes

PubMed Central

Wroblewski, Dariusz; Francis, Brian A.; Sadun, Alfredo; Vakili, Ghazal; Chopra, Vikas

2014-01-01

Automated perimetry is used for the assessment of visual function in a variety of ophthalmic and neurologic diseases. We report development and clinical testing of a compact, head-mounted, and eye-tracking perimeter (VirtualEye) that provides a more comfortable test environment than the standard instrumentation. VirtualEye performs the equivalent of a full threshold 24-2 visual field in two modes: (1) manual, with patient response registered with a mouse click, and (2) visual grasp, where the eye tracker senses change in gaze direction as evidence of target acquisition. 59 patients successfully completed the test in manual mode and 40 in visual grasp mode, with 59 undergoing the standard Humphrey field analyzer (HFA) testing. Large visual field defects were reliably detected by VirtualEye. Point-by-point comparison between the results obtained with the different modalities indicates: (1) minimal systematic differences between measurements taken in visual grasp and manual modes, (2) the average standard deviation of the difference distributions of about 5 dB, and (3) a systematic shift (of 4–6 dB) to lower sensitivities for VirtualEye device, observed mostly in high dB range. The usability survey suggested patients' acceptance of the head-mounted device. The study appears to validate the concepts of a head-mounted perimeter and the visual grasp mode. PMID:25050326

Do classroom ventilation rates in California elementary schools influence standardized test scores? Results from a prospective study.

PubMed

Mendell, M J; Eliseeva, E A; Davies, M M; Lobscheid, A

2016-08-01

Limited evidence has associated lower ventilation rates (VRs) in schools with reduced student learning or achievement. We analyzed longitudinal data collected over two school years from 150 classrooms in 28 schools within three California school districts. We estimated daily classroom VRs from real-time indoor carbon dioxide measured by web-connected sensors. School districts provided individual-level scores on standard tests in Math and English, and classroom-level demographic data. Analyses assessing learning effects used two VR metrics: average VRs for 30 days prior to tests, and proportion of prior daily VRs above specified thresholds during the year. We estimated relationships between scores and VR metrics in multivariate models with generalized estimating equations. All school districts had median school-year VRs below the California VR standard. Most models showed some positive associations of VRs with test scores; however, estimates varied in magnitude and few 95% confidence intervals excluded the null. Combined-district models estimated statistically significant increases of 0.6 points (P = 0.01) on English tests for each 10% increase in prior 30-day VRs. Estimated increases in Math were of similar magnitude but not statistically significant. Findings suggest potential small positive associations between classroom VRs and learning. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Rapid diagnostic tests for typhoid and paratyphoid (enteric) fever

PubMed Central

Wijedoru, Lalith; Mallett, Sue; Parry, Christopher M

2017-01-01

Background Differentiating both typhoid (Salmonella Typhi) and paratyphoid (Salmonella Paratyphi A) infection from other causes of fever in endemic areas is a diagnostic challenge. Although commercial point-of-care rapid diagnostic tests (RDTs) for enteric fever are available as alternatives to the current reference standard test of blood or bone marrow culture, or to the widely used Widal Test, their diagnostic accuracy is unclear. If accurate, they could potentially replace blood culture as the World Health Organization (WHO)-recommended main diagnostic test for enteric fever. Objectives To assess the diagnostic accuracy of commercially available rapid diagnostic tests (RDTs) and prototypes for detecting Salmonella Typhi or Paratyphi A infection in symptomatic persons living in endemic areas. Search methods We searched the Cochrane Infectious Diseases Group Specialized Register, MEDLINE, Embase, Science Citation Index, IndMED, African Index Medicus, LILACS, ClinicalTrials.gov, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) up to 4 March 2016. We manually searched WHO reports, and papers from international conferences on Salmonella infections. We also contacted test manufacturers to identify studies. Selection criteria We included diagnostic accuracy studies of enteric fever RDTs in patients with fever or with symptoms suggestive of enteric fever living in endemic areas. We classified the reference standard used as either Grade 1 (result from a blood culture and a bone marrow culture) or Grade 2 (result from blood culture and blood polymerase chain reaction, or from blood culture alone). Data collection and analysis Two review authors independently extracted the test result data. We used a modified QUADAS-2 extraction form to assess methodological quality. We performed a meta-analysis when there were sufficient studies for the test and heterogeneity was reasonable. Main results Thirty-seven studies met the inclusion criteria and included a total of 5080 participants (range 50 to 1732). Enteric fever prevalence rates in the study populations ranged from 1% to 75% (median prevalence 24%, interquartile range (IQR) 11% to 46%). The included studies evaluated 16 different RDTs, and 16 studies compared two or more different RDTs. Only three studies used the Grade 1 reference standard, and only 11 studies recruited unselected febrile patients. Most included studies were from Asia, with five studies from sub-Saharan Africa. All of the RDTs were designed to detect S.Typhi infection only. Most studies evaluated three RDTs and their variants: TUBEX in 14 studies; Typhidot (Typhidot, Typhidot-M, and TyphiRapid-Tr02) in 22 studies; and the Test-It Typhoid immunochromatographic lateral flow assay, and its earlier prototypes (dipstick, latex agglutination) developed by the Royal Tropical Institute, Amsterdam (KIT) in nine studies. Meta-analyses showed an average sensitivity of 78% (95% confidence interval (CI) 71% to 85%) and specificity of 87% (95% CI 82% to 91%) for TUBEX; and an average sensitivity of 69% (95% CI 59% to 78%) and specificity of 90% (95% CI 78% to 93%) for all Test-It Typhoid and prototype tests (KIT). Across all forms of the Typhidot test, the average sensitivity was 84% (95% CI 73% to 91%) and specificity was 79% (95% CI 70% to 87%). When we based the analysis on the 13 studies of the Typhidot test that either reported indeterminate test results or where the test format means there are no indeterminate results, the average sensitivity was 78% (95% CI 65% to 87%) and specificity was 77% (95% CI 66% to 86%). We did not identify any difference in either sensitivity or specificity between TUBEX, Typhidot, and Test-it Typhoid tests when based on comparison to the 13 Typhidot studies where indeterminate results are either reported or not applicable. If TUBEX and Test-it Typhoid are compared to all Typhidot studies, the sensitivity of Typhidot was higher than Test-it Typhoid (15% (95% CI 2% to 28%), but other comparisons did not show a difference at the 95% level of CIs. In a hypothetical cohort of 1000 patients presenting with fever where 30% (300 patients) have enteric fever, on average Typhidot tests reporting indeterminate results or where tests do not produce indeterminate results will miss the diagnosis in 66 patients with enteric fever, TUBEX will miss 66, and Test-It Typhoid and prototype (KIT) tests will miss 93. In the 700 people without enteric fever, the number of people incorrectly diagnosed with enteric fever would be 161 with Typhidot tests, 91 with TUBEX, and 70 with Test-It Typhoid and prototype (KIT) tests. The CIs around these estimates were wide, with no difference in false positive results shown between tests. The quality of the data for each study was evaluated using a standardized checklist called QUADAS-2. Overall, the certainty of the evidence in the studies that evaluated enteric fever RDTs was low. Authors' conclusions In 37 studies that evaluated the diagnostic accuracy of RDTs for enteric fever, few studies were at a low risk of bias. The three main RDT tests and variants had moderate diagnostic accuracy. There was no evidence of a difference between the average sensitivity and specificity of the three main RDT tests. More robust evaluations of alternative RDTs for enteric fever are needed. The accuracy of rapid diagnostic tests for detecting typhoid and paratyphoid (enteric) fever Cochrane researchers assessed the accuracy of commercially-available rapid diagnostic tests and their prototypes (including TUBEX, Typhidot, Typhidot-M, Test-it Typhoid, and other tests) for detecting typhoid and paratyphoid (enteric) fever in people living in countries where the estimated number of individuals with the disease at any one time is greater than 10 per 100,000 population. If accurate, they could replace the current World Health Organization (WHO)-recommended diagnostic test: culture (growing the bacteria that causes the infection from a patient’s blood or bone marrow). Background Typhoid fever and paratyphoid fever are infections caused by the bacteria Salmonella Typhi and Salmonella Paratyphi A respectively. The term ‘enteric fever’ is used to describe both infections. Enteric fever can be difficult to diagnose as the signs and symptoms are similar to those of other infectious diseases that cause fever such as malaria. The recommended test to confirm if a person has enteric fever is to grow the Salmonella from their blood. It takes at least 48 hours to give a result, so cannot help healthcare workers make a diagnosis the same day the blood culture is taken. Blood cultures may give a negative result even though a person has enteric fever. The test also requires a laboratory and trained staff, which are often unavailable in communities where enteric fever is common. Rapid diagnostic tests (RDTs) are designed to be easy to use, and to deliver a quick result without the need for a blood culture laboratory. The cost of an enteric fever RDT would be significantly less than a blood culture, and requires less training to perform. Study characteristics Cochrane researchers searched the available literature up to 4 March 2016 and included 37 studies. Most studies recruited participants from South Asia. Most participants were adults, with 22 studies including children. All of the RDTs evaluated detected Salmonella Typhi (typhoid fever) only. Quality of the evidence The Cochrane researchers evaluated the quality of the data for each study using a standardized checklist called QUADAS-2. High quality studies that compared different types of RDT in the same patients were few in number. Two-thirds of the included studies did not evaluate the RDTs in the context of patients who are typically tested for the disease. Many studies utilized a particular study design (a case control study) which risks overestimating RDT accuracy. In the studies evaluating the Typhidot RDT, it was often unclear how many test results were indeterminate, when the test cannot distinguish a current episode of infection from a previous disease episode. Overall, the certainty of the evidence in the studies that evaluated enteric fever RDTs was low. Key results Sensitivity indicates the percentage of patients with a positive test result who are correctly diagnosed with disease. Specificity indicates the percentage of patients who are correctly identified as not having disease. TUBEX showed an average sensitivity of 78% and specificity of 87%. Typhidot studies, grouped together to include Typhidot, Typhidot-M, and TyphiRapid-Tr02, showed an average sensitivity of 84% and specificity of 79%. When Typhidot studies with clear reporting of indeterminate results are considered, the average sensitivity and specificity of Typhidot was 78% and 77% respectively. Test-It Typhoid and prototypes (KIT) showed an average sensitivity of 69% and specificity of 90%. Based on these results, in 1000 patients with fever where 30% (300 patients) have enteric fever, we would expect Typhidot tests reporting indeterminate results or where tests do not produce indeterminate results to, on average, miss the diagnosis (give a false negative result) in 66 patients with enteric fever, TUBEX to miss 66, and Test-It Typhoid and prototypes (KIT) to miss 93. In the 700 people without enteric fever, the number of people incorrectly given a diagnosis of enteric fever (a false positive result) would be on average 161 with these Typhidot tests, 91 with TUBEX, and 70 with the Test-It Typhoid and prototypes (KIT). These differences in the number of false negative and false positive results in patients from the different tests are not statistically important. The RDTs evaluated are not sufficiently accurate to replace blood culture as a diagnostic test for enteric fever. PMID:28545155

Determination of patulin in apple juice by liquid chromatography: collaborative study.

PubMed

Brause, A R; Trucksess, M W; Thomas, F S; Page, S W

1996-01-01

An AOAC International-International Union of Pure and Applied Chemistry-International Fruit Juice Union (AOAC-IUPAC-IFJU) collaborative study was conducted to evaluate a liquid chromatographic (LC) procedure for determination of patulin in apple juice. Patulin is a mold metabolite found naturally in rotting apples. Patulin is extracted with ethyl acetate, treated with sodium carbonate solution, and determined by reversed-phase LC with UV detection at 254 or 276 nm. Water, water-tetrahydrofuran, or water-acetonitrile was used as mobile phase. Levels determined in spiked test samples were 20, 50, 100, and 200 micrograms/L. A test sample naturally contaminated at 31 micrograms/L was also included. Twenty-two collaborators in 10 countries analyzed 12 test samples of apple juice. Recoveries averaged 96%, with a range of 91-108%. Repeatability relative standard deviations (RSDr) ranged from 10.9 to 53.8%. The reproducibility relative standard deviation (RSDR) ranged from 15.1 to 68.8%. The LC method for determination of patulin in apple juice has been adopted first action by AOAC INTERNATIONAL.

Perception of the fundamental frequencies of children's voices by trained and untrained listeners.

PubMed

Wilson, F B; Wellen, C J; Kimbarow, M L

1983-10-01

This study was designed to determine if trained voice clinicians were better than untrained listeners in judging differences in the fundamental frequencies of children's voices. We also attempted to determine the degree of difference in fundamental frequency necessary for accurate judgments. Finally, ability to perceive pitch differences in speaking voices was correlated with ability to judge puretone stimuli. Results indicated that trained clinicians were no better at judging average fundamental frequency than were untrained listeners. Both groups performed at chance level until differences in vocal fundamental frequency exceeded 20 Hz. Finally, there was no correlation between subjects' success on standardized puretone pitch tests and ability to judge average pitch in the speaking voice.

Accuracy of acoustic velocity metering systems for measurement of low velocity in open channels

USGS Publications Warehouse

Laenen, Antonius; Curtis, R. E.

1989-01-01

Acoustic velocity meter (AVM) accuracy depends on equipment limitations, the accuracy of acoustic-path length and angle determination, and the stability of the mean velocity to acoustic-path velocity relation. Equipment limitations depend on path length and angle, transducer frequency, timing oscillator frequency, and signal-detection scheme. Typically, the velocity error from this source is about +or-1 to +or-10 mms/sec. Error in acoustic-path angle or length will result in a proportional measurement bias. Typically, an angle error of one degree will result in a velocity error of 2%, and a path-length error of one meter in 100 meter will result in an error of 1%. Ray bending (signal refraction) depends on path length and density gradients present in the stream. Any deviation from a straight acoustic path between transducer will change the unique relation between path velocity and mean velocity. These deviations will then introduce error in the mean velocity computation. Typically, for a 200-meter path length, the resultant error is less than one percent, but for a 1,000 meter path length, the error can be greater than 10%. Recent laboratory and field tests have substantiated assumptions of equipment limitations. Tow-tank tests of an AVM system with a 4.69-meter path length yielded an average standard deviation error of 9.3 mms/sec, and the field tests of an AVM system with a 20.5-meter path length yielded an average standard deviation error of a 4 mms/sec. (USGS)

Analysis of heavy metals (Pb and Zn) concentration in sediment of Blanakan fish ponds, Subang, West Java

NASA Astrophysics Data System (ADS)

Wiriawan, A.; Takarina, N. D.; Pin, T. G.

2017-07-01

Blanakan fish ponds receive water resource from Kali Malang and Blanakan rivers. Industrial and domestic activities along the river can cause pollution, especially heavy metals. Zinc (Zn) is an essential element that needed by an organism, while Lead (Pb) is a nonessential element that is not needed. Discharge of waste water from industries and anthropogenic activities continuously not only pollute the water but also the sediment and biota live on it. This research was aimed to know the heavy metals content in the sediment of Blanakan fish ponds. Sediment samples were taken on July and August 2016 at three locations. Heavy metals were analyzed using Atomic Absorption Spectrophotometry (AAS) Shimadzu 6300. The result of Lead (Pb) measurement showed that Fish Pond 1 had higher average concentration compared Fish Pond 2 and Fish Pond 3 which was 0.55 ppm. Standard for Lead (Pb) in sediment according to Ontario Sediment Standards (2008) is 31 ppm. Based on Zinc (Zn) measurement, it was known that average of Zinc (Zn) concentration also higher on Fish Pond 1 compared to Fish Pond 2 and 3 which was 1.93 ppm. According to Ontario Sediment Standards (2008), a standard for Zinc (Zn) in sediment is 120 ppm. This indicated that heavy metals in the sediment of fish ponds were below standards. Statistical analysis using t-test showed that there was no significant difference of heavy metals content among fish ponds.

Resolution acuity versus recognition acuity with Landolt-style optotypes.

PubMed

Heinrich, Sven P; Bach, Michael

2013-09-01

International standards define acuity as the reciprocal of the threshold gap size of a Landolt C optotype. However, the literature is inconsistent as to what type of acuity is measured with Landolt Cs. The present study addresses this question more directly than previous studies by quantifying the effect of an inherent luminance artifact in Landolt-style optotypes. Two groups of modified optotypes were used. In the first group, each optotype had a single gap structure with the same average luminance. Between optotypes, the gap structures differed in their degree of fineness. In the second group of optotypes, a standard gap was always present, defining the orientation of the optotype. Additional gap structures of the same average luminance, but different fineness, were inserted at the remaining potential gap locations, thereby balancing luminance across potential gap locations. Visual acuity measures were obtained for each optotype variant, using a computer-based test employing a staircase procedure. Similar acuity values were obtained for all optotypes of the first group, and for standard Landolt Cs, irrespective of the fineness of the gap structure. With luminance-balanced optotypes of the second group, measured acuity was halved, compared to standard optotypes. The results support the view that it is recognition acuity, rather than resolution acuity, which is measured with standard Landolt-style optotypes, with the imbalanced luminance distribution serving as a cue. Luminance-balanced optotypes may help to obtain a more veridical estimate of resolution acuity, although recognition acuity may be more relevant in daily living.

Cost-effectiveness Analysis of Nutritional Support for the Prevention of Pressure Ulcers in High-Risk Hospitalized Patients.

PubMed

Tuffaha, Haitham W; Roberts, Shelley; Chaboyer, Wendy; Gordon, Louisa G; Scuffham, Paul A

2016-06-01

To evaluate the cost-effectiveness of nutritional support compared with standard care in preventing pressure ulcers (PrUs) in high-risk hospitalized patients. An economic model using data from a systematic literature review. A meta-analysis of randomized controlled trials on the efficacy of nutritional support in reducing the incidence of PrUs was conducted. Modeled cohort of hospitalized patients at high risk of developing PrUs and malnutrition simulated during their hospital stay and up to 1 year. Standard care included PrU prevention strategies, such as redistribution surfaces, repositioning, and skin protection strategies, along with standard hospital diet. In addition to the standard care, the intervention group received nutritional support comprising patient education, nutrition goal setting, and the consumption of high-protein supplements. The analysis was from a healthcare payer perspective. Key outcomes of the model included the average costs and quality-adjusted life years. Model results were tested in univariate sensitivity analyses, and decision uncertainty was characterized using a probabilistic sensitivity analysis. Compared with standard care, nutritional support was cost saving at AU $425 per patient and marginally more effective with an average 0.005 quality-adjusted life years gained. The probability of nutritional support being cost-effective was 87%. Nutritional support to prevent PrUs in high-risk hospitalized patients is cost-effective with substantial cost savings predicted. Hospitals should implement the recommendations from the current PrU practice guidelines and offer nutritional support to high-risk patients.

Following international trends while subject to past traditions: neuropsychological test use in the Nordic countries.

PubMed

Egeland, Jens; Løvstad, Marianne; Norup, Anne; Nybo, Taina; Persson, Bengt A; Rivera, Diego Fernando; Schanke, Anne-Kristine; Sigurdardottir, Solrun; Arango-Lasprilla, Juan Carlos

2016-01-01

Historically, the neuropsychological test traditions of the four Nordic countries have spanned from the flexible and qualitative tradition of Luria-Christensen to the quantitative large battery approach of Halstead and Kløve-Matthews. This study reports current test use and discusses whether these traditions still influence attitudes toward test use and choice of tests. The study is based on survey data from 702 Nordic neuropsychologists. The average participant used 9 tests in a standard assessment, and 25 tests overall in their practice. Test use was moderated by nationality, competence level, practice profile, and by attitude toward test selection. Participants who chose their tests flexibly used fewer tests than those adhering to the flexible battery approach, but had fewer tests from which to choose. Testing patients with psychiatric disorders was associated with using more tests. IQ, memory, attention, and executive function were the domains with the largest utilization rate, while tests of motor, visual/spatial, and language were used by few. There is a lack of academic achievement tests. Screening tests played a minor role in specialized assessments, and symptom validity tests were seldom applied on a standard basis. Most tests were of Anglo-American origin. New test methods are implemented rapidly in the Nordic countries, but test selection is also characterized by the dominating position of established and much researched tests. The Halstead-Reitan and Luria traditions are currently weak, but national differences in size of test batteries seem to be influenced by these longstanding traditions.

Performance evaluation of the intra compression in the video coding standards

NASA Astrophysics Data System (ADS)

Abramowski, Andrzej

2015-09-01

The article presents a comparison of the Intra prediction algorithms in the current state-of-the-art video coding standards, including MJPEG 2000, VP8, VP9, H.264/AVC and H.265/HEVC. The effectiveness of techniques employed by each standard is evaluated in terms of compression efficiency and average encoding time. The compression efficiency is measured using BD-PSNR and BD-RATE metrics with H.265/HEVC results as an anchor. Tests are performed on a set of video sequences, composed of sequences gathered by Joint Collaborative Team on Video Coding during the development of the H.265/HEVC standard and 4K sequences provided by Ultra Video Group. According to results, H.265/HEVC provides significant bit-rate savings at the expense of computational complexity, while VP9 may be regarded as a compromise between the efficiency and required encoding time.

Dynamic Site Characterization and Correlation of Shear Wave Velocity with Standard Penetration Test ` N' Values for the City of Agartala, Tripura State, India

NASA Astrophysics Data System (ADS)

Sil, Arjun; Sitharam, T. G.

2014-08-01

Seismic site characterization is the basic requirement for seismic microzonation and site response studies of an area. Site characterization helps to gauge the average dynamic properties of soil deposits and thus helps to evaluate the surface level response. This paper presents a seismic site characterization of Agartala city, the capital of Tripura state, in the northeast of India. Seismically, Agartala city is situated in the Bengal Basin zone which is classified as a highly active seismic zone, assigned by Indian seismic code BIS-1893, Indian Standard Criteria for Earthquake Resistant Design of Structures, Part-1 General Provisions and Buildings. According to the Bureau of Indian Standards, New Delhi (2002), it is the highest seismic level (zone-V) in the country. The city is very close to the Sylhet fault (Bangladesh) where two major earthquakes ( M w > 7) have occurred in the past and affected severely this city and the whole of northeast India. In order to perform site response evaluation, a series of geophysical tests at 27 locations were conducted using the multichannel analysis of surface waves (MASW) technique, which is an advanced method for obtaining shear wave velocity ( V s) profiles from in situ measurements. Similarly, standard penetration test (SPT-N) bore log data sets have been obtained from the Urban Development Department, Govt. of Tripura. In the collected data sets, out of 50 bore logs, 27 were selected which are close to the MASW test locations and used for further study. Both the data sets ( V s profiles with depth and SPT-N bore log profiles) have been used to calculate the average shear wave velocity ( V s30) and average SPT-N values for the upper 30 m depth of the subsurface soil profiles. These were used for site classification of the study area recommended by the National Earthquake Hazard Reduction Program (NEHRP) manual. The average V s30 and SPT-N classified the study area as seismic site class D and E categories, indicating that the city is susceptible to site effects and liquefaction. Further, the different data set combinations between V s and SPT-N (corrected and uncorrected) values have been used to develop site-specific correlation equations by statistical regression, as ` V s' is a function of SPT- N value (corrected and uncorrected), considered with or without depth. However, after considering the data set pairs, a probabilistic approach has also been presented to develop a correlation using a quantile-quantile (Q-Q) plot. A comparison has also been made with the well known published correlations (for all soils) available in the literature. The present correlations closely agree with the other equations, but, comparatively, the correlation of shear wave velocity with the variation of depth and uncorrected SPT-N values provides a more suitable predicting model. Also the Q-Q plot agrees with all the other equations. In the absence of in situ measurements, the present correlations could be used to measure V s profiles of the study area for site response studies.

An atomic clock with 10(-18) instability.

PubMed

Hinkley, N; Sherman, J A; Phillips, N B; Schioppo, M; Lemke, N D; Beloy, K; Pizzocaro, M; Oates, C W; Ludlow, A D

2013-09-13

Atomic clocks have been instrumental in science and technology, leading to innovations such as global positioning, advanced communications, and tests of fundamental constant variation. Timekeeping precision at 1 part in 10(18) enables new timing applications in relativistic geodesy, enhanced Earth- and space-based navigation and telescopy, and new tests of physics beyond the standard model. Here, we describe the development and operation of two optical lattice clocks, both using spin-polarized, ultracold atomic ytterbium. A measurement comparing these systems demonstrates an unprecedented atomic clock instability of 1.6 × 10(-18) after only 7 hours of averaging.

Assessing neglect dyslexia with compound words.

PubMed

Reinhart, Stefan; Schunck, Alexander; Schaadt, Anna Katharina; Adams, Michaela; Simon, Alexandra; Kerkhoff, Georg

2016-10-01

The neglect syndrome is frequently associated with neglect dyslexia (ND), which is characterized by omissions or misread initial letters of single words. ND is usually assessed with standardized reading texts in clinical settings. However, particularly in the chronic phase of ND, patients often report reading deficits in everyday situations but show (nearly) normal performances in test situations that are commonly well-structured. To date, sensitive and standardized tests to assess the severity and characteristics of ND are lacking, although reading is of high relevance for daily life and vocational settings. Several studies found modulating effects of different word features on ND. We combined those features in a novel test to enhance test sensitivity in the assessment of ND. Low-frequency words of different length that contain residual pronounceable words when the initial letter strings are neglected were selected. We compared these words in a group of 12 ND-patients suffering from right-hemispheric first-ever stroke with word stimuli containing no existing residual words. Finally, we tested whether the serially presented words are more sensitive for the diagnosis of ND than text reading. The severity of ND was modulated strongly by the ND-test words and error frequencies in single word reading of ND words were on average more than 10 times higher than in a standardized text reading test (19.8% vs. 1.8%). The novel ND-test maximizes the frequency of specific ND-errors and is therefore more sensitive for the assessment of ND than conventional text reading tasks. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

40 CFR 86.1865-12 - How to comply with the fleet average CO2 standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Calculating the fleet average carbon-related exhaust emissions. (1) Manufacturers must compute separate production-weighted fleet average carbon-related exhaust emissions at the end of the model year for passenger... for sale, and certifying model types to standards as defined in § 86.1818-12. The model type carbon...

Investigating adsorption/desorption of carbon dioxide in aluminum compressed gas cylinders.

PubMed

Miller, Walter R; Rhoderick, George C; Guenther, Franklin R

2015-02-03

Between June 2010 and June 2011, the National Institute of Standards and Technology (NIST) gravimetrically prepared a suite of 20 carbon dioxide (CO2) in air primary standard mixtures (PSMs). Ambient mole fraction levels were obtained through six levels of dilution beginning with pure (99.999%) CO2. The sixth level covered the ambient range from 355 to 404 μmol/mol. This level will be used to certify cylinder mixtures of compressed dry whole air from both the northern and southern hemispheres as NIST standard reference materials (SRMs). The first five levels of PSMs were verified against existing PSMs in a balance of air or nitrogen with excellent agreement observed (the average percent difference between the calculated and analyzed values was 0.002%). After the preparation of a new suite of PSMs at ambient level, they were compared to an existing suite of PSMs. It was observed that the analyzed concentration of the new PSMs was less than the calculated gravimetric concentration by as much as 0.3% relative. The existing PSMs had been used in a Consultative Committee for Amount of Substance-Metrology in Chemistry Key Comparison (K-52) in which there was excellent agreement (the NIST-analyzed value was -0.09% different from the calculated value, while the average of the difference for all 18 participants was -0.10%) with those of other National Metrology Institutes and World Meteorological Organization designated laboratories. In order to determine the magnitude of these losses at the ambient level, a series of "daughter/mother" tests were initiated and conducted in which the gas mixture containing CO2 from a "mother" cylinder was transferred into an evacuated "daughter" cylinder. These cylinder pairs were then compared using cavity ring-down spectroscopy under high reproducibility conditions (the average percent relative standard deviation of sample response was 0.02). A ratio of the daughter instrument response to the mother response was calculated, with the resultant deviation from unity being a measure of the CO2 loss or gain. Cylinders from three specialty gas vendors were tested to find the appropriate cylinder in which to prepare the new PSMs. All cylinders tested showed a loss of CO2, presumably to the walls of the cylinder. The vendor cylinders exhibiting the least loss of CO2 were then purchased to be used to gravimetrically prepare the PSMs, adjusting the calculated mole fraction for the loss bias and an uncertainty calculated from this work.

Is it possible to shorten examination time in posture control studies?

PubMed

Faraldo García, Ana; Soto Varela, Andrés; Santos Pérez, Sofía

2015-01-01

The sensory organization test (SOT) is the gold-standard test for the study of postural control with posturographic platforms. Three registers of Conditions 3, 4, 5 and 6 are conducted to find an arithmetic mean of the 3, with the time that this entails. The aim of this study was to determine whether a single record for each SOT condition would give us the same information as the arithmetic mean of the 3 recordings used until now. 100 healthy individuals who performed a sensory organisation test in the Smart Balance Master(®) Neurocom platform. For the statistical analysis we used the Wilcoxon test for nonparametric variables and dependent t-student for paired samples for parametric variables (P<.05). When comparing the scores on the first record with the average of the 3 records, we found statistically significant differences for the 4 conditions (P<0.05). Comparing the first record to the second record also yielded statistically significant differences in the 4 conditions (P<.05). Upon comparing the second record with the third, however, we found differences in only Condition 5, with the significance being borderline (P=.04). Finally, comparing the average of the first and second record with the average of the 3 records, we also found statistically significant differences for the 4 conditions (P<.05). Using only 1 or 2 records from each of the conditions on the SOT does not give us the same information as the arithmetic average of the 3 records used until now. Copyright © 2014 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

International Experience in Standards and Labeling Programs for Rice Cookers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina

China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been workingmore » with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cookers in warm mode has improved approximately 12 percent from 1993 to 2004 due to the 'low temperature warming method' developed by manufacturers. The Energy Conservation Center of Japan (IEEJ) releases energy saving products database on the web regularly, on which the energy saving performance of each product is listed and ranked. Energy saving in rice cookers mostly rest with insulation of the pot. Technology developed to improve the energy efficiency of the rice cookers includes providing vacuum layers on both side of the pot, using copper-plated materials, and double stainless layer lid that can be heated and steam can run in between the two layers to speed the heating process.« less

Oscillating-Flow Regenerator Test Rig: Hardware and Theory With Derived Correlations for Screens and Felts

NASA Technical Reports Server (NTRS)

Gedeon, D.; Wood, J. G.

1996-01-01

A number of wire mesh and metal felt test samples, with a range of porosities, yield generic correlations for friction factor, Nusselt number, enhanced axial conduction ratio, and overall heat flux ratio. This information is directed primarily toward stirling cycle regenerator modelers, but will be of use to anyone seeking to better model fluid flow through these porous materials. Behind these results lies an oscillating-flow test rig, which measures pumping dissipation and thermal energy transport in sample matrices, and several stages of data-reduction software, which correlate instantaneous values for the above dimensionless groups. Within the software, theoretical model reduces instantaneous quantifies from cycle-averaged measurables using standard parameter estimation techniques.

NeuroRecovery Network provides standardization of locomotor training for persons with incomplete spinal cord injury.

PubMed

Morrison, Sarah A; Forrest, Gail F; VanHiel, Leslie R; Davé, Michele; D'Urso, Denise

2012-09-01

To illustrate the continuity of care afforded by a standardized locomotor training program across a multisite network setting within the Christopher and Dana Reeve Foundation NeuroRecovery Network (NRN). Single patient case study. Two geographically different hospital-based outpatient facilities. This case highlights a 25-year-old man diagnosed with C4 motor incomplete spinal cord injury with American Spinal Injury Association Impairment Scale grade D. Standardized locomotor training program 5 sessions per week for 1.5 hours per session, for a total of 100 treatment sessions, with 40 sessions at 1 center and 60 at another. Ten-meter walk test and 6-minute walk test were assessed at admission and discharge across both facilities. For each of the 100 treatment sessions percent body weight support, average, and maximum treadmill speed were evaluated. Locomotor endurance, as measured by the 6-minute walk test, and overground gait speed showed consistent improvement from admission to discharge. Throughout training, the patient decreased the need for body weight support and was able to tolerate faster treadmill speeds. Data indicate that the patient continued to improve on both treatment parameters and walking function. Standardization across the NRN centers provided a mechanism for delivering consistent and reproducible locomotor training programs across 2 facilities without disrupting training or recovery progression. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

49 CFR 537.2 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF TRANSPORTATION AUTOMOTIVE FUEL ECONOMY REPORTS § 537.2 Purpose. The purpose of this part is to... manufacturers' plans for complying with average fuel economy standards and in preparing an annual review of the average fuel economy standards. ...

49 CFR 537.2 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF TRANSPORTATION AUTOMOTIVE FUEL ECONOMY REPORTS § 537.2 Purpose. The purpose of this part is to... manufacturers' plans for complying with average fuel economy standards and in preparing an annual review of the average fuel economy standards. ...

49 CFR 537.2 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF TRANSPORTATION AUTOMOTIVE FUEL ECONOMY REPORTS § 537.2 Purpose. The purpose of this part is to... manufacturers' plans for complying with average fuel economy standards and in preparing an annual review of the average fuel economy standards. ...

49 CFR 537.2 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF TRANSPORTATION AUTOMOTIVE FUEL ECONOMY REPORTS § 537.2 Purpose. The purpose of this part is to... manufacturers' plans for complying with average fuel economy standards and in preparing an annual review of the average fuel economy standards. ...

49 CFR 537.2 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF TRANSPORTATION AUTOMOTIVE FUEL ECONOMY REPORTS § 537.2 Purpose. The purpose of this part is to... manufacturers' plans for complying with average fuel economy standards and in preparing an annual review of the average fuel economy standards. ...

Experimental Investigation of an Air-Cooled Turbine Operating in a Turbojet Engine at Turbine Inlet Temperatures up to 2500 F

NASA Technical Reports Server (NTRS)

Cochran, Reeves P.; Dengler, Robert P.

1961-01-01

An experimental investigation was made of an air-cooled turbine at average turbine inlet temperatures up to 2500 F. A modified production-model 12-stage axial-flow-compressor turbojet engine operating in a static sea-level stand was used as the test vehicle. The modifications to the engine consisted of the substitution of special combustor and turbine assemblies and double-walled exhaust ducting for the standard parts of the engine. All of these special parts were air-cooled to withstand the high operating temperatures of the investigation. The air-cooled turbine stator and rotor blades were of the corrugated-insert type. Leading-edge tip caps were installed on the rotor blades to improve leading-edge cooling by diverting the discharge of coolant to regions of lower gas pressure toward the trailing edge of the blade tip. Caps varying in length from 0.15- to 0.55-chord length were used in an attempt to determine the optimum cap length for this blade. The engine was operated over a range of average turbine inlet temperatures from about 1600 to about 2500 F, and a range of average coolant-flow ratios of 0.012 to 0.065. Temperatures of the air-cooled turbine rotor blades were measured at all test conditions by the use of thermocouples and temperature-indicating paints. The results of the investigation indicated that this type of blade is feasible for operation in turbojet engines at the average turbine inlet temperatures and stress levels tested(maximums of 2500 F and 24,000 psi, respectively). An average one-third-span blade temperature of 1300 F could be maintained on 0.35-chord tip cap blades with an average coolant-flow ratio of about 0.022 when the average turbine inlet temperature was 2500 F and cooling-air temperature was about 260 F. All of the leading-edge tip cap lengths improved the cooling of the leading-edge region of the blades, particularly at low average coolant-flow ratios. At high gas temperatures, such parts as the turbine stator and the combustor liners are likely to be as critical as the turbine rotor blades.

Specification for a standard radar sea clutter model

NASA Astrophysics Data System (ADS)

Paulus, Richard A.

1990-09-01

A model for the average sea clutter radar cross section is proposed for the Oceanographic and Atmospheric Master Library. This model is a function of wind speed (or sea state), wind direction relative to the antenna, refractive conditions, radar antenna height, frequency, polarization, horizontal beamwidth, and compressed pulse length. The model is fully described, a FORTRAN 77 computer listing is provided, and test cases are given to demonstrate the proper operation of the program.

Analyzing patient's waiting time in emergency & trauma department in public hospital - A case study

NASA Astrophysics Data System (ADS)

Roslan, Shazwa; Tahir, Herniza Md; Nordin, Noraimi Azlin Mohd; Zaharudin, Zati Aqmar

2014-09-01

Emergency and Trauma Department (ETD) is an important element for a hospital. It provides medical service, which operates 24 hours a day in most hospitals. However overcrowding is not exclusion for ETD. Overflowing occurs due to affordable services provided by public hospitals, since it is funded by the government. It is reported that a patient attending ETD must be treated within 90 minutes, in accordance to achieve the Key Performance Indicator (KPI). However, due to overcrowd situations, most patients have to wait longer than the KPI standard. In this paper, patient's average waiting time is analyzed. Using Chi-Square Test of Goodness, patient's inter arrival per hour is also investigated. As conclusion, Monday until Wednesday was identified as the days that exceed the KPI standard while Chi-Square Test of Goodness showed that the patient's inter arrival is independent and random.

Determination of guaifenesin in human serum by capillary gas chromatography and electron capture detection.

PubMed

Sharaf, Maged H M; Stiff, Dwight D

2004-06-29

A method for the quantitation of guaifenesin in human serum has been developed and validated. The procedure involves liquid-liquid extraction of the serum sample in the presence of mephenesin as an internal standard, followed by derivatization and analysis using capillary gas chromatography (GC) and electron capture detection (ECD). Different solvents were tested for extraction of guaifenesin from serum. n-Hexane/dichloromethane (1:1, v/v) gave the highest recovery and the lowest background and was chosen as the extraction solvent. After extraction, the residue of guaifenesin was derivatized at 60 degrees C for 30 min, with trifluoroacetic acid anhydride (TFAA) in toluene in the presence of pyridine. Excess trifluoroacetic acid anhydride was removed using dilute solution of ammonium hydroxide. The method proved to be linear over the range of 25.0-1000 ng/ml. Recovery of guaifenesin from spiked samples was consistent, averaging 75.5% at 50.0 ng/ml with a range of 72.0-80.0% (N = 8 determinations) and averaging 78% at 800 ng/ml with a range of 76.0-81.0% (N = 8 determinations). The internal standard recovery was also consistent averaging 72.8% with a range of 67.0-76.0% (N = 16 determinations). Copyright 2004 Elsevier B.V.

Numerical and arithmetical cognition: a longitudinal study of process and concept deficits in children with learning disability.

PubMed

Geary, D C; Hamson, C O; Hoard, M K

2000-11-01

Based on the stability and level of performance on standard achievement tests in first and second grade (mean age in first grade = 82 months), children with IQ scores in the low-average to high-average range were classified as learning disabled (LD) in mathematics (MD), reading (RD), or both (MD/RD). These children (n = 42), a group of children who showed variable achievement test performance across grades (n = 16), and a control group of academically normal peers (n = 35) were administered a series of experimental and psychometric tasks. The tasks assessed number comprehension and production skills, counting knowledge, arithmetic skills, working memory, the ease of activation of phonetic representations of words and numbers, and spatial abilities. The children with variable achievement test performance did not differ from the academically normal children in any cognitive domain, whereas the children in the LD groups showed specific patterns of cognitive deficit, above and beyond the influence of IQ. Discussion focuses on the similarities and differences across the groups of LD children. Copyright 2000 Academic Press.

Flavour and identification threshold detection overview of Slovak adepts for certified testing.

PubMed

Vietoris, VladimIr; Barborova, Petra; Jancovicova, Jana; Eliasova, Lucia; Karvaj, Marian

2016-07-01

During certification process of sensory assessors of Slovak certification body we obtained results for basic taste thresholds and lifestyle habits. 500 adult people were screened during experiment with food industry background. For analysis of basic and non basic tastes, we used standardized procedure of ISO 8586-1:1993. In flavour test experiment, group of (26-35 y.o) produced the lowest error ratio (1.438), highest is (56+ y.o.) group with result (2.0). Average error value based on gender for women was (1.510) in comparison to men (1.477). People with allergies have the average error ratio (1.437) in comparison to people without allergies (1.511). Non-smokers produced less errors (1.484) against the smokers (1.576). Another flavour threshold identification test detected differences among age groups (by age are values increased). The highest number of errors made by men in metallic taste was (24%) the same as made by women (22%). Higher error ratio made by men occurred in salty taste (19%) against women (10%). Analysis detected some differences between allergic/non-allergic, smokers/non-smokers groups.

Sensitivity of species to chemicals: dose-response characteristics for various test types (LC(50), LR(50) and LD(50)) and modes of action.

PubMed

Hendriks, A Jan; Awkerman, Jill A; de Zwart, Dick; Huijbregts, Mark A J

2013-11-01

While variable sensitivity of model species to common toxicants has been addressed in previous studies, a systematic analysis of inter-species variability for different test types, modes of action and species is as of yet lacking. Hence, the aim of the present study was to identify similarities and differences in contaminant levels affecting cold-blooded and warm-blooded species administered via different routes. To that end, data on lethal water concentrations LC50, tissue residues LR50 and oral doses LD50 were collected from databases, each representing the largest of its kind. LC50 data were multiplied by a bioconcentration factor (BCF) to convert them to internal concentrations that allow for comparison among species. For each endpoint data set, we calculated the mean and standard deviation of species' lethal level per compound. Next, the means and standard deviations were averaged by mode of action. Both the means and standard deviations calculated depended on the number of species tested, which is at odds with quality standard setting procedures. Means calculated from (BCF) LC50, LR50 and LD50 were largely similar, suggesting that different administration routes roughly yield similar internal levels. Levels for compounds interfering biochemically with elementary life processes were about one order of magnitude below that of narcotics disturbing membranes, and neurotoxic pesticides and dioxins induced death in even lower amounts. Standard deviations for LD50 data were similar across modes of action, while variability of LC50 values was lower for narcotics than for substances with a specific mode of action. The study indicates several directions to go for efficient use of available data in risk assessment and reduction of species testing. Copyright © 2013 Elsevier Inc. All rights reserved.

Is wealthier always healthier in poor countries? The health implications of income, inequality, poverty, and literacy in India.

PubMed

Rajan, Keertichandra; Kennedy, Jonathan; King, Lawrence

2013-07-01

Standard policy prescriptions for improving public health in less developed countries (LDCs) prioritise raising average income levels over redistributive policies since it is widely accepted that 'wealthier is healthier'. It is argued that income inequality becomes a significant predictor of public health only after the 'epidemiological transition'. This paper tests this theory in India, where rising income levels have not been matched by improvements in public health. We use state-, district-, and individual-level data to investigate the relationship between infant and under-five mortality, and average income, poverty, income inequality, and literacy. Our analysis shows that at both state- and district-level public health is negatively associated with average income and positively associated with poverty. But, at both levels, controlling for poverty and literacy renders average income statistically insignificant. At state-level, only literacy remains a significant and negative predictor. At the less aggregated district-level, both poverty and literacy predict public health but literacy has a stronger effect than poverty. Inequality does not predict public health at state- or district-levels. At the individual-level, however, it is a strong predictor of self-reported ailment, even after we control for district average income, individual income, and individual education. Our analysis suggests that wealthier is indeed healthier in India - but only to the extent that high average incomes reflect low poverty and high literacy. Furthermore, inequality has a strong effect on self-reported health. Standard policy prescriptions, then, need revision: first, alleviating poverty may be more effective than raising average income levels; second, non-income goods like literacy may make an important contribution to public health; and third, policy should be based on a broader understanding of societal well-being and the factors that promote it. Copyright © 2013 Elsevier Ltd. All rights reserved.

Improving the psychometric properties of dot-probe attention measures using response-based computation.

PubMed

Evans, Travis C; Britton, Jennifer C

2018-09-01

Abnormal threat-related attention in anxiety disorders is most commonly assessed and modified using the dot-probe paradigm; however, poor psychometric properties of reaction-time measures may contribute to inconsistencies across studies. Typically, standard attention measures are derived using average reaction-times obtained in experimentally-defined conditions. However, current approaches based on experimentally-defined conditions are limited. In this study, the psychometric properties of a novel response-based computation approach to analyze dot-probe data are compared to standard measures of attention. 148 adults (19.19 ± 1.42 years, 84 women) completed a standardized dot-probe task including threatening and neutral faces. We generated both standard and response-based measures of attention bias, attentional orientation, and attentional disengagement. We compared overall internal consistency, number of trials necessary to reach internal consistency, test-retest reliability (n = 72), and criterion validity obtained using each approach. Compared to standard attention measures, response-based measures demonstrated uniformly high levels of internal consistency with relatively few trials and varying improvements in test-retest reliability. Additionally, response-based measures demonstrated specific evidence of anxiety-related associations above and beyond both standard attention measures and other confounds. Future studies are necessary to validate this approach in clinical samples. Response-based attention measures demonstrate superior psychometric properties compared to standard attention measures, which may improve the detection of anxiety-related associations and treatment-related changes in clinical samples. Copyright © 2018 Elsevier Ltd. All rights reserved.

Photocleavage-based affinity purification of biomarkers from serum: Application to multiplex allergy testing.

PubMed

Wan, Zhi; Ostendorff, Heather P; Liu, Ziying; Schneider, Lynda C; Rothschild, Kenneth J; Lim, Mark J

2018-01-01

Multiplex serological immunoassays, such as implemented on microarray or microsphere-based platforms, provide greater information content and higher throughput, while lowering the cost and blood volume required. These features are particularly attractive in pediatric food allergy testing to facilitate high throughput multi-allergen analysis from finger- or heel-stick collected blood. However, the miniaturization and microfluidics necessary for creating multiplex assays make them highly susceptible to the "matrix effect" caused by interference from non-target agents in serum and other biofluids. Such interference can result in lower sensitivity, specificity, reproducibility and quantitative accuracy. These problems have in large part prevented wide-spread implementation of multiplex immunoassays in clinical laboratories. We report the development of a novel method to eliminate the matrix effect by utilizing photocleavable capture antibodies to purify and concentrate blood-based biomarkers (a process termed PC-PURE) prior to detection in a multiplex immunoassay. To evaluate this approach, it was applied to blood-based allergy testing. Patient total IgE was purified and enriched using PC-PURE followed by multiplex microsphere-based detection of allergen-specific IgEs (termed the AllerBead assay). AllerBead was formatted to detect the eight most common pediatric food allergens: milk, soy, wheat, egg, peanuts, tree nuts, fin fish and shellfish, which account for >90% of all pediatric food allergies. 205 serum samples obtained from Boston Children's Hospital were evaluated. When PC-PURE was employed with AllerBead, excellent agreement was obtained with the standard, non-multiplex, ImmunoCAP® assay (average sensitivity above published negative predictive cutoffs = 96% and average Pearson r = 0.90; average specificity = 97%). In contrast, poor ImmunoCAP®-correlation was observed when PC-PURE was not utilized (average sensitivity above published negative predictive cutoffs = 59% and average Pearson r = 0.61; average specificity = 97%). This approach should be adaptable to improve a wide range of multiplex immunoassays such as in cancer, infectious disease and autoimmune disease.

Photocleavage-based affinity purification of biomarkers from serum: Application to multiplex allergy testing

PubMed Central

Wan, Zhi; Ostendorff, Heather P.; Liu, Ziying; Schneider, Lynda C.; Rothschild, Kenneth J.

2018-01-01

Multiplex serological immunoassays, such as implemented on microarray or microsphere-based platforms, provide greater information content and higher throughput, while lowering the cost and blood volume required. These features are particularly attractive in pediatric food allergy testing to facilitate high throughput multi-allergen analysis from finger- or heel-stick collected blood. However, the miniaturization and microfluidics necessary for creating multiplex assays make them highly susceptible to the “matrix effect” caused by interference from non-target agents in serum and other biofluids. Such interference can result in lower sensitivity, specificity, reproducibility and quantitative accuracy. These problems have in large part prevented wide-spread implementation of multiplex immunoassays in clinical laboratories. We report the development of a novel method to eliminate the matrix effect by utilizing photocleavable capture antibodies to purify and concentrate blood-based biomarkers (a process termed PC-PURE) prior to detection in a multiplex immunoassay. To evaluate this approach, it was applied to blood-based allergy testing. Patient total IgE was purified and enriched using PC-PURE followed by multiplex microsphere-based detection of allergen-specific IgEs (termed the AllerBead assay). AllerBead was formatted to detect the eight most common pediatric food allergens: milk, soy, wheat, egg, peanuts, tree nuts, fin fish and shellfish, which account for >90% of all pediatric food allergies. 205 serum samples obtained from Boston Children’s Hospital were evaluated. When PC-PURE was employed with AllerBead, excellent agreement was obtained with the standard, non-multiplex, ImmunoCAP® assay (average sensitivity above published negative predictive cutoffs = 96% and average Pearson r = 0.90; average specificity = 97%). In contrast, poor ImmunoCAP®-correlation was observed when PC-PURE was not utilized (average sensitivity above published negative predictive cutoffs = 59% and average Pearson r = 0.61; average specificity = 97%). This approach should be adaptable to improve a wide range of multiplex immunoassays such as in cancer, infectious disease and autoimmune disease. PMID:29389948

Factors that influence standard automated perimetry test results in glaucoma: test reliability, technician experience, time of day, and season.

PubMed

Junoy Montolio, Francisco G; Wesselink, Christiaan; Gordijn, Marijke; Jansonius, Nomdo M

2012-10-09

To determine the influence of several factors on standard automated perimetry test results in glaucoma. Longitudinal Humphrey field analyzer 30-2 Swedish interactive threshold algorithm data from 160 eyes of 160 glaucoma patients were used. The influence of technician experience, time of day, and season on the mean deviation (MD) was determined by performing linear regression analysis of MD against time on a series of visual fields and subsequently performing a multiple linear regression analysis with the MD residuals as dependent variable and the factors mentioned above as independent variables. Analyses were performed with and without adjustment for the test reliability (fixation losses and false-positive and false-negative answers) and with and without stratification according to disease stage (baseline MD). Mean follow-up was 9.4 years, with on average 10.8 tests per patient. Technician experience, time of day, and season were associated with the MD. Approximately 0.2 dB lower MD values were found for inexperienced technicians (P < 0.001), tests performed after lunch (P < 0.001), and tests performed in the summer or autumn (P < 0.001). The effects of time of day and season appeared to depend on disease stage. Independent of these effects, the percentage of false-positive answers strongly influenced the MD with a 1 dB increase in MD per 10% increase in false-positive answers. Technician experience, time of day, season, and the percentage of false-positive answers have a significant influence on the MD of standard automated perimetry.

The Yucca Mountain Project prototype air-coring test, U12g tunnel, Nevada test site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ray, J.M.; Newsom, J.C.

1994-12-01

The Prototype Air-Coring Test was conducted at the Nevada Test Site (NTS) G-Tunnel facility to evaluate standard coring techniques, modified slightly for air circulation, for use in testing at a prospective nuclear waste repository at Yucca Mountain, Nevada. Air-coring technology allows sampling of subsurface lithology with minimal perturbation to ambient characteristic such as that required for exploratory holes near aquifers, environmental applications, and site characterization work. Two horizontal holes were cored, one 50 ft long and the other 150 ft long, in densely welded fractured tuff to simulate the difficult drilling conditions anticipated at Yucca Mountain. Drilling data from sevenmore » holes on three other prototype tests in nonwelded tuff were also collected for comparison. The test was used to establish preliminary standards of performance for drilling and dust collection equipment and to assess procedural efficiencies. The Longyear-38 drill achieved 97% recovery for HQ-size core (-2.5 in.), and the Atlas Copco dust collector (DCT-90) captured 1500 lb of fugitive dust in a mine environment with only minor modifications. Average hole production rates were 6-8 ft per 6-h shift in welded tuff and almost 20 ft per shift on deeper holes in nonwelded tuff. Lexan liners were successfully used to encapsulate core samples during the coring process and protect core properties effectively. The Prototype Air-Coring Test demonstrated that horizontal air coring in fractured welded tuff (to at least 150 ft) can be safely accomplished by proper selection, integration, and minor modification of standard drilling equipment, using appropriate procedures and engineering controls. The test also indicated that rig logistics, equipment, and methods need improvement before attempting a large-scale dry drilling program at Yucca Mountain.« less

Fuel Economy Regulations and Efficiency Technology Improvements in U.S. Cars Since 1975

NASA Astrophysics Data System (ADS)

MacKenzie, Donald Warren

Light-duty vehicles account for 43% of petroleum consumption and 23% of greenhouse gas emissions in the United States. Corporate Average Fuel Economy (CAFE) standards are the primary policy tool addressing petroleum consumption in the U.S., and are set to tighten substantially through 2025. In this dissertation, I address several interconnected questions on the technical, policy, and market aspects of fuel consumption reduction. I begin by quantifying historic improvements in fuel efficiency technologies since the 1970s. First. I develop a linear regression model of acceleration performance conditional on power, weight, powertrain, and body characteristics, showing that vehicles today accelerate 20-30% faster than vehicles with similar specifications in the 1970s. Second, I find that growing use of alternative materials and a switch to more weight-efficient vehicle architectures since 1975 have cut the weight of today's new cars by approximately 790 kg (46%). Integrating these results with model-level specification data, I estimate that the average fuel economy of new cars could have tripled from 1975-2009, if not for changes in performance, size, and features over this period. The pace of improvements was not uniform, averaging 5% annually from 1975-1990, but only 2% annually since then. I conclude that the 2025 standards can be met through improvements in efficiency technology, if we can return to 1980s rates of improvement, and growth in acceleration performance and feature content is curtailed. I next test the hypotheses that higher fuel prices and more stringent CAFE standards cause automotive firms to deploy efficiency technologies more rapidly. I find some evidence that higher fuel prices cause more rapid changes in technology, but little to no evidence that tighter CAFE standards increase rates of technology change. I conclude that standards alone, without continued high gasoline prices, may not drive technology improvements at rates needed to meet the 2025 CAFE standards factors determining industry support for nationwide fuel economy regulations. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs@mit.edu)

Methods specification for diagnostic test accuracy studies in fine-needle aspiration cytology: a survey of reporting practice.

PubMed

Schmidt, Robert L; Factor, Rachel E; Affolter, Kajsa E; Cook, Joshua B; Hall, Brian J; Narra, Krishna K; Witt, Benjamin L; Wilson, Andrew R; Layfield, Lester J

2012-01-01

Diagnostic test accuracy (DTA) studies on fine-needle aspiration cytology (FNAC) often show considerable variability in diagnostic accuracy between study centers. Many factors affect the accuracy of FNAC. A complete description of the testing parameters would help make valid comparisons between studies and determine causes of performance variation. We investigated the manner in which test conditions are specified in FNAC DTA studies to determine which parameters are most commonly specified and the frequency with which they are specified and to see whether there is significant variability in reporting practice. We identified 17 frequently reported test parameters and found significant variation in the reporting of these test specifications across studies. On average, studies reported 5 of the 17 items that would be required to specify the test conditions completely. A more complete and standardized reporting of methods, perhaps by means of a checklist, would improve the interpretation of FNAC DTA studies.

Quality Test of Flexible Flat Cable (FFC) With Short Open Test Using Law Ohm Approach through Embedded Fuzzy Logic Based On Open Source Arduino Data Logger

NASA Astrophysics Data System (ADS)

Rohmanu, Ajar; Everhard, Yan

2017-04-01

A technological development, especially in the field of electronics is very fast. One of the developments in the electronics hardware device is Flexible Flat Cable (FFC), which serves as a media liaison between the main boards with other hardware parts. The production of Flexible Flat Cable (FFC) will go through the process of testing and measuring of the quality Flexible Flat Cable (FFC). Currently, the testing and measurement is still done manually by observing the Light Emitting Diode (LED) by the operator, so there were many problems. This study will be made of test quality Flexible Flat Cable (FFC) computationally utilize Open Source Embedded System. The method used is the measurement with Short Open Test method using Ohm’s Law approach to 4-wire (Kelvin) and fuzzy logic as a decision maker measurement results based on Open Source Arduino Data Logger. This system uses a sensor current INA219 as a sensor to read the voltage value thus obtained resistance value Flexible Flat Cable (FFC). To get a good system we will do the Black-box testing as well as testing the accuracy and precision with the standard deviation method. In testing the system using three models samples were obtained the test results in the form of standard deviation for the first model of 1.921 second model of 4.567 and 6.300 for the third model. While the value of the Standard Error of Mean (SEM) for the first model of the model 0.304 second at 0.736 and 0.996 of the third model. In testing this system, we will also obtain the average value of the measurement tolerance resistance values for the first model of - 3.50% 4.45% second model and the third model of 5.18% with the standard measurement of prisoners and improve productivity becomes 118.33%. From the results of the testing system is expected to improve the quality and productivity in the process of testing Flexible Flat Cable (FFC).

National Highway Traffic Safety Administration Corporate Average Fuel Economy (CAFE) Standards

DOT National Transportation Integrated Search

2003-01-01

The National Highway Traffic Safety Administration (NHTSA) must set Corporate Average Fuel Economy (CAFE) standards for light trucks. This was authorized by the Energy Policy and Conservation Act, which added Title V: Imporving Automotive Fuel Effici...

Health and Academic Achievement: Cumulative Effects of Health Assets on Standardized Test Scores Among Urban Youth in the United States*

PubMed Central

Ickovics, Jeannette R.; Carroll-Scott, Amy; Peters, Susan M.; Schwartz, Marlene; Gilstad-Hayden, Kathryn; McCaslin, Catherine

2014-01-01

Background The Institute of Medicine (2012) concluded that we must “strengthen schools as the heart of health.” To intervene for better outcomes in both health and academic achievement, identifying factors that impact children is essential. Study objectives are to (1) document associations between health assets and academic achievement, and (2) examine cumulative effects of these assets on academic achievement. Methods Participants include 940 students (grades 5 and 6) from 12 schools randomly selected from an urban district. Data include physical assessments, fitness testing, surveys, and district records. Fourteen health indicators were gathered including physical health (eg, body mass index [BMI]), health behaviors (eg, meeting recommendations for fruit/vegetable consumption), family environment (eg, family meals), and psychological well-being (eg, sleep quality). Data were collected 3-6 months prior to standardized testing. Results On average, students reported 7.1 health assets out of 14. Those with more health assets were more likely to be at goal for standardized tests (reading/writing/mathematics), and students with the most health assets were 2.2 times more likely to achieve goal compared with students with the fewest health assets (both p < .001). Conclusions Schools that utilize nontraditional instructional strategies to improve student health may also improve academic achievement, closing equity gaps in both health and academic achievement. PMID:24320151

Association between prenatal exposure to ambient diesel particulate matter and perchloroethylene with children's 3rd grade standardized test scores

PubMed Central

Stingone, Jeanette A.; McVeigh, Katharine H.; Claudio, Luz

2016-01-01

The objective of this research was to determine if prenatal exposure to two common urban air pollutants, diesel and perchloroethylene, affects children's 3rd grade standardized test scores in mathematics and English language arts (ELA). Exposure estimates consisted of annual average ambient concentrations of diesel particulate matter and perchloroethylene obtained from the Environmental Protection Agency's 1996 National Air Toxics Assessment for the residential census tract at birth. Outcome data consisted of linked birth and educational records for 201,559 singleton, non-anomalous children born between 1994-1998 who attended New York City public schools. Quantile regression models were used to estimate the effects of these exposures on multiple points within the continuous distribution of standardized test scores. Modified Poisson regression models were used to calculate risk ratios (RR) and 95% confidence intervals (CI) of failing to meet curricula standards, an indicator derived from test scores. Models were adjusted for a number of maternal, neighborhood and childhood factors. Results showed that math scores were approximately 6% of a standard deviation lower for children exposed to the highest levels of both pollutants as compared to children with low levels of both pollutants. Children exposed to high levels of both pollutants also had the largest risk of failing to meet math test standards when compared to children with low levels of exposure to the pollutants (RR 1.10 95%CI 1.07,1.12 RR high perchloroethylene only 1.03 95%CI 1.00,1.06; RR high diesel PM only 1.02 95%CI 0.99,1.06). There was no association observed between exposure to only one of the pollutants and failing to meet ELA standards. This study provides preliminary evidence of associations between prenatal exposure to urban air pollutants and lower academic outcomes. Additionally, these findings suggest that individual pollutants may additively impact health and point to the need to study the collective effects of air pollutant mixtures. Key Words: air toxics, academic outcomes, urban health, tetrachloroethylene, air pollutant mixtures PMID:27058443

Association between prenatal exposure to ambient diesel particulate matter and perchloroethylene with children's 3rd grade standardized test scores.

PubMed

Stingone, Jeanette A; McVeigh, Katharine H; Claudio, Luz

2016-07-01

The objective of this research was to determine if prenatal exposure to two common urban air pollutants, diesel and perchloroethylene, affects children's 3rd grade standardized test scores in mathematics and English language arts (ELA). Exposure estimates consisted of annual average ambient concentrations of diesel particulate matter and perchloroethylene obtained from the Environmental Protection Agency's 1996 National Air Toxics Assessment for the residential census tract at birth. Outcome data consisted of linked birth and educational records for 201,559 singleton, non-anomalous children born between 1994 and 1998 who attended New York City public schools. Quantile regression models were used to estimate the effects of these exposures on multiple points within the continuous distribution of standardized test scores. Modified Poisson regression models were used to calculate risk ratios (RR) and 95% confidence intervals (CI) of failing to meet curricula standards, an indicator derived from test scores. Models were adjusted for a number of maternal, neighborhood and childhood factors. Results showed that math scores were approximately 6% of a standard deviation lower for children exposed to the highest levels of both pollutants as compared to children with low levels of both pollutants. Children exposed to high levels of both pollutants also had the largest risk of failing to meet math test standards when compared to children with low levels of exposure to the pollutants (RR 1.10 95%CI 1.07,1.12 RR high perchloroethylene only 1.03 95%CI 1.00,1.06; RR high diesel PM only 1.02 95%CI 0.99,1.06). There was no association observed between exposure to the pollutants and failing to meet ELA standards. This study provides preliminary evidence of associations between prenatal exposure to urban air pollutants and lower academic outcomes. Additionally, these findings suggest that individual pollutants may additively impact health and point to the need to study the collective effects of air pollutant mixtures. air toxics, academic outcomes, urban health, tetrachloroethylene, air pollutant mixtures. Copyright © 2016 Elsevier Inc. All rights reserved.

Comparison of the transformation temperatures of heat-activated Nickel-Titanium orthodontic archwires by two different techniques.

PubMed

Obaisi, Noor Aminah; Galang-Boquiren, Maria Therese S; Evans, Carla A; Tsay, Tzong Guang Peter; Viana, Grace; Berzins, David; Megremis, Spiro

2016-07-01

The purpose of this study was to investigate the suitability of the Bend and Free Recovery (BFR) method as a standard test method to determine the transformation temperatures of heat-activated Ni-Ti orthodontic archwires. This was done by determining the transformation temperatures of two brands of heat-activated Ni-Ti orthodontic archwires using the both the BFR method and the standard method of Differential Scanning Calorimetry (DSC). The values obtained from the two methods were compared with each other and to the manufacturer-listed values. Forty heat-activated Ni-Ti archwires from both Rocky Mountain Orthodontics (RMO) and Opal Orthodontics (Opal) were tested using BFR and DSC. Round (0.016 inches) and rectangular (0.019×0.025 inches) archwires from each manufacturer were tested. The austenite start temperatures (As) and austenite finish temperatures (Af) were recorded. For four of the eight test groups, the BFR method resulted in lower standard deviations than the DSC method, and, overall, the average standard deviation for BFR testing was slightly lower than for DSC testing. Statistically significant differences were seen between the transformation temperatures obtained from the BFR and DSC test methods. However, the Af temperatures obtained from the two methods were remarkably similar with the mean differences ranging from 0.0 to 2.1°C: Af Opal round (BFR 26.7°C, DSC 27.6°C) and rectangular (BFR 27.6°C, DSC 28.6°C); Af RMO round (BFR 25.5°C, DSC 25.5°C) and rectangular (BFR 28.0°C, DSC 25.9°C). Significant differences were observed between the manufacturer-listed transformation temperatures and those obtained with BFR and DSC testing for both manufacturers. The results of this study suggest that the Bend and Free Recovery method is suitable as a standard method to evaluate the transformation temperatures of heat-activated Ni-Ti orthodontic archwires. Copyright © 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Decreased Variability of the 6-Minute Walk Test by Heart Rate Correction in Patients with Neuromuscular Disease

PubMed Central

Prahm, Kira P.; Witting, Nanna; Vissing, John

2014-01-01

Objective The 6-minute walk test is widely used to assess functional status in neurological disorders. However, the test is subject to great inter-test variability due to fluctuating motivation, fatigue and learning effects. We investigated whether inter-test variability of the 6MWT can be reduced by heart rate correction. Methods Sixteen patients with neuromuscular diseases, including Facioscapulohumeral muscular dystrophy, Limb-girdle muscular dystrophy, Charcot-Marie-Tooths, Dystrophia Myotonica and Congenital Myopathy and 12 healthy subjects were studied. Patients were excluded if they had cardiac arrhythmias, if they received drug treatment for hypertension or any other medical conditions that could interfere with the interpretation of the heart rate and walking capability. All completed three 6-minute walk tests on three different test-days. Heart rate was measured continuously. Results Successive standard 6-minute walk tests showed considerable learning effects between Tests 1 and 2 (4.9%; P = 0.026), and Tests 2 and 3 (4.5%; P = 0.020) in patients. The same was seen in controls between Tests 1 and 2 (8.1%; P = 0.039)). Heart rate correction abolished this learning effect. Conclusion A modified 6-minute walk test, by correcting walking distance with average heart rate during walking, decreases the variability among repeated 6-minute walk tests, and should be considered as an alternative outcome measure to the standard 6-minute walk test in future clinical follow-up and treatment trials. PMID:25479403

Bi-fuel System - Gasoline/LPG in A Used 4-Stroke Motorcycle - Fuel Injection Type

NASA Astrophysics Data System (ADS)

Suthisripok, Tongchit; Phusakol, Nachaphat; Sawetkittirut, Nuttapol

2017-10-01

Bi-fuel-Gasoline/LPG system has been effectively and efficiently used in gasoline vehicles with less pollutants emission. The motorcycle tested was a used Honda AirBlade i110 - fuel injection type. A 3-litre LPG storage tank, an electronic fuel control unit, a 1-mm LPG injector and a regulator were securely installed. The converted motorcycle can be started with either gasoline or LPG. The safety relief valve was set below 48 kPa and over 110 kPa. The motorcycle was tuned at the relative rich air-fuel ratio (λ) of 0.85-0.90 to attain the best power output. From dynamometer tests over the speed range of 65-100 km/h, the average power output when fuelling LPG was 5.16 hp; dropped 3.9% from the use of gasoline91. The average LPG consumption rate from the city road test at the average speed of 60 km/h was 40.1 km/l, about 17.7% more. This corresponded to lower LPG’s energy density of about 16.2%. In emission, the CO and HC concentrations were 44.4% and 26.5% lower. Once a standard gas equipment set with ECU and LPG injector were securely installed and the engine was properly tuned up to suit LPG’s characteristics, the converted bi-fuel motorcycle offers efficiently, safely and economically performance with environmental friendly emission.

Characteristics of typical non-road machinery emissions in China by using portable emission measurement system.

PubMed

Fu, Mingliang; Ge, Yunshan; Tan, Jianwei; Zeng, Tao; Liang, Bin

2012-10-15

Non-road machinery, especially construction equipment could be an important pollutant source of the deterioration in air quality in Chinese urban areas due to its large quantity and to the absence of stringent emission requirements. In this study, emission tests were performed on 12 excavators and 8 wheel loaders by using portable emission measurement system (PEMS) to determine their emission characteristics. The typical operating modes were categorized as idling mode, moving mode and working mode. Compared with those during idling and moving modes, the average time-based emission factors during working mode of HC were 2.61 and 1.27 times higher, NO(x) were 3.66 and 1.36 times higher, and PM were 4.05 and 1.95 times higher, respectively. Under all conditions, categories of the measured emissions increased with the rise in engine power. Compared with those of Stage I emission standard equipment, gaseous emissions and PM emitted from Stage II emission standard equipment were lower. The results indicated that, from Stage I to Stage II, the average reductions of HC, NO(x) and PM were 56%, 37% and 29% for the working mode, respectively. Those results also demonstrated the effectiveness of emission control regulation and the improvement of emission control technology. The data and tests show that the longer the accumulated working hours, the higher HC and NO(x) average fuel-based emission factors are. The emissions measured from the construction vehicles employed in this study were higher than the data collected in previous studies, which shows that it is critical for the government to put into effect more stringent emission regulations to further improve the air quality in Chinese urban areas. Copyright © 2012 Elsevier B.V. All rights reserved.

Xenogeneic collagen matrix with coronally advanced flap compared to connective tissue with coronally advanced flap for the treatment of dehiscence-type recession defects.

PubMed

McGuire, Michael K; Scheyer, E Todd

2010-08-01

For root coverage therapy, the connective tissue graft (CTG) plus coronally advanced flap (CAF) is considered the gold standard therapy against which alternative therapies are generally compared. When evaluating these therapies, in addition to traditional measures of root coverage, subject-reported, qualitative measures of esthetics, pain, and overall preferences for alternative procedures should also be considered. This study determines if a xenogeneic collagen matrix (CM) with CAF might be as effective as CTG+CAF in the treatment of recession defects. This study was a single-masked, randomized, controlled, split-mouth study of dehiscence-type recession defects in contralateral sites; one defect received CTG+CAF and the other defect received CM+CAF. A total of 25 subjects (8 male, 17 female; mean age: 43.7 +/- 12.2 years) were evaluated at 6 months and 1 year. The primary efficacy endpoint was recession depth at 6 months. Secondary endpoints included traditional periodontal measures, such as width of keratinized tissue and percentage of root coverage. Subject-reported values of pain, discomfort, and esthetic satisfaction were also recorded. At 6 months, recession depth was on average 0.52 mm for test sites and 0.10 mm for control sites. Recession depth change from baseline was statistically significant between test and control, with an average of 2.62 mm gained at test sites and 3.10 mm gained at control sites for a difference of 0.4 mm (P = 0.0062). At 1 year, test percentage of root coverage averaged 88.5%, and controls averaged 99.3% (P = 0.0313). Keratinized tissue width gains were equivalent for both therapies and averaged 1.34 mm for test sites and 1.26 mm for control sites (P = 0.9061). There were no statistically significant differences between subject-reported values for esthetic satisfaction, and subjects' assessments of pain and discomfort were also equivalent. When balanced with subject-reported esthetic values and compared to historical root coverage outcomes reported by other investigators, CM+CAF presents a viable alternative to CTG+CAF, without the morbidity of soft tissue graft harvest.

Identification of registered nursing care of residents in English nursing homes using the Minimum Data Set Resident Assessment Instrument (MDS/RAI) and Resource Utilisation Groups version III (RUG-III).

PubMed

Carpenter, Iain; Perry, Michelle; Challis, David; Hope, Kevin

2003-05-01

to determine if a combination of Minimum Data Set/Resident Assessment Instrument (MDS/RAI) assessment variables and the Resource Utilisation Groups version III (RUG-III) case-mix system could be used as a method of identifying and reimbursing registered nursing care needs in long-term care. the sample included 193 nursing home residents from four nursing homes from three different locations and care providers in England. The study included assessments of residents' care needs using either the MDS/RAI assessments or RUG stand-alone questionnaires and a time study that recorded the amount of nursing time received by residents over a 24-h period. Validity of RUG-III for explaining the distribution of care time between residents in different RUG-III groups was tested. The difference in direct and indirect care provided by registered general nurses (RGN) and care assistants (CA) to residents in RUG-III clinical groups was compared. the RUG-III system explained 56% of the variance in care time (Eta2, P=0.0001). Residents in RUG-III groups associated with particular medical and nursing needs (enhanced RGN care) received more than twice as much indirect RGN care time (t-test, P<0.001) and 1.4 times as much direct RGN and direct CA time (t-test, P<0.01) than residents with primarily cognitive impairment or physical problems only (standard RGN care). Residents with enhanced RGN care received an average of 48.1 min of RGN care in 24 h (95% CI 4.1-55.2) compared with an average of 31.1 min (95% CI 26.8-35.5) for residents in the standard RGN care group. A third low RGN care group was created following publication of the Department of Health guidance on NHS Funded Nursing Care. With three levels, the enhanced care group receives about 38% more than the standard group, and the low group receives about 50% of the standard group. the RUG-III system effectively differentiated between nursing home residents who are receiving 'low', 'standard' and 'enhanced' RGN care time. The findings could provide the basis of a reimbursement system for registered nursing time in long-term care facilities in the UK.

40 CFR 49.125 - Rule for limiting the emissions of particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... used exclusively for space heating with a rated heat input capacity of less than 400,000 British... average of 0.23 grams per dry standard cubic meter (0.1 grains per dry standard cubic foot), corrected to... boiler stack must not exceed an average of 0.46 grams per dry standard cubic meter (0.2 grains per dry...

Attractiveness of facial averageness and symmetry in non-western cultures: in search of biologically based standards of beauty.

PubMed

Rhodes, G; Yoshikawa, S; Clark, A; Lee, K; McKay, R; Akamatsu, S

2001-01-01

Averageness and symmetry are attractive in Western faces and are good candidates for biologically based standards of beauty. A hallmark of such standards is that they are shared across cultures. We examined whether facial averageness and symmetry are attractive in non-Western cultures. Increasing the averageness of individual faces, by warping those faces towards an averaged composite of the same race and sex, increased the attractiveness of both Chinese (experiment 1) and Japanese (experiment 2) faces, for Chinese and Japanese participants, respectively. Decreasing averageness by moving the faces away from an average shape decreased attractiveness. We also manipulated the symmetry of Japanese faces by blending each original face with its mirror image to create perfectly symmetric versions. Japanese raters preferred the perfectly symmetric versions to the original faces (experiment 2). These findings show that preferences for facial averageness and symmetry are not restricted to Western cultures, consistent with the view that they are biologically based. Interestingly, it made little difference whether averageness was manipulated by using own-race or other-race averaged composites and there was no preference for own-race averaged composites over other-race or mixed-race composites (experiment 1). We discuss the implications of these results for understanding what makes average faces attractive. We also discuss some limitations of our studies, and consider other lines of converging evidence that may help determine whether preferences for average and symmetric faces are biologically based.

An annual quasidifference approach to water price elasticity

NASA Astrophysics Data System (ADS)

Bell, David R.; Griffin, Ronald C.

2008-08-01

The preferred price specification for retail water demand estimation has not been fully settled by prior literature. Empirical consistency of price indices is necessary to enable testing of competing specifications. Available methods of unbiasing the price index are summarized here. Using original rate information from several hundred Texas utilities, new indices of marginal and average price change are constructed. Marginal water price change is shown to explain consumption variation better than average water price change, based on standard information criteria. Annual change in quantity consumed per month is estimated with differences in climate variables and the new quasidifference marginal price index. As expected, the annual price elasticity of demand is found to vary with daily high and low temperatures and the frequency of precipitation.

Survey on air pollution and cardiopulmonary mortality in shiraz from 2011 to 2012: an analytical-descriptive study.

PubMed

Dehghani, Mansooreh; Anushiravani, Amir; Hashemi, Hassan; Shamsedini, Narges

2014-06-01

Expanding cities with rapid economic development has resulted in increased energy consumption leading to numerous environmental problems for their residents. The aim of this study was to investigate the correlation between air pollution and mortality rate due to cardiovascular and respiratory diseases in Shiraz. This is an analytical cross-sectional study in which the correlation between major air pollutants (including carbon monoxide [CO], sulfur dioxide [SO2], nitrogen dioxide [NO2] and particle matter with a diameter of less than 10 μ [PM10]) and climatic parameters (temperature and relative humidity) with the number of those whom expired from cardiopulmonary disease in Shiraz from March 2011 to January 2012 was investigated. Data regarding the concentration of air pollutants were determined by Shiraz Environmental Organization. Information about climatic parameters was collected from the database of Iran's Meteorological Organization. The number of those expired from cardiopulmonary disease in Shiraz were provided by the Department of Health, Shiraz University of Medical Sciences. We used non-parametric correlation test to analyze the relationship between these parameters. The results demonstrated that in all the recorded data, the average monthly pollutants standard index (PSI) values of PM10 were higher than standard limits, while the average monthly PSI value of NO2 were lower than standard. There was no significant relationship between the number of those expired from cardiopulmonary disease and the air pollutant (P > 0.05). Air pollution can aggravate chronic cardiopulmonary disease. In the current study, one of the most important air pollutants in Shiraz was the PM10 component. Mechanical processes, such as wind blowing from neighboring countries, is the most important parameter increasing PM10 in Shiraz to alarming conditions. The average monthly variation in PSI values of air pollutants such as NO2, CO, and SO2 were lower than standard limits. Moreover, there was no significant correlation between the average monthly variation in PSI of NO2, CO, PM10, and SO2 and the number of those expired from cardiopulmonary disease in Shiraz.

Retrospective cost adaptive Reynolds-averaged Navier-Stokes k-ω model for data-driven unsteady turbulent simulations

NASA Astrophysics Data System (ADS)

Li, Zhiyong; Hoagg, Jesse B.; Martin, Alexandre; Bailey, Sean C. C.

2018-03-01

This paper presents a data-driven computational model for simulating unsteady turbulent flows, where sparse measurement data is available. The model uses the retrospective cost adaptation (RCA) algorithm to automatically adjust the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k- ω turbulence equations to improve agreement between the simulated flow and the measurements. The RCA-RANS k- ω model is verified for steady flow using a pipe-flow test case and for unsteady flow using a surface-mounted-cube test case. Measurements used for adaptation of the verification cases are obtained from baseline simulations with known closure coefficients. These verification test cases demonstrate that the RCA-RANS k- ω model can successfully adapt the closure coefficients to improve agreement between the simulated flow field and a set of sparse flow-field measurements. Furthermore, the RCA-RANS k- ω model improves agreement between the simulated flow and the baseline flow at locations at which measurements do not exist. The RCA-RANS k- ω model is also validated with experimental data from 2 test cases: steady pipe flow, and unsteady flow past a square cylinder. In both test cases, the adaptation improves agreement with experimental data in comparison to the results from a non-adaptive RANS k- ω model that uses the standard values of the k- ω closure coefficients. For the steady pipe flow, adaptation is driven by mean stream-wise velocity measurements at 24 locations along the pipe radius. The RCA-RANS k- ω model reduces the average velocity error at these locations by over 35%. For the unsteady flow over a square cylinder, adaptation is driven by time-varying surface pressure measurements at 2 locations on the square cylinder. The RCA-RANS k- ω model reduces the average surface-pressure error at these locations by 88.8%.

Comparison of Breast Density Between Synthesized Versus Standard Digital Mammography.

PubMed

Haider, Irfanullah; Morgan, Matthew; McGow, Anna; Stein, Matthew; Rezvani, Maryam; Freer, Phoebe; Hu, Nan; Fajardo, Laurie; Winkler, Nicole

2018-06-12

To evaluate perceptual difference in breast density classification using synthesized mammography (SM) compared with standard or full-field digital mammography (FFDM) for screening. This institutional review board-approved, retrospective, multireader study evaluated breast density on 200 patients who underwent baseline screening mammogram during which both SM and FFDM were obtained contemporaneously from June 1, 2016, through November 30, 2016. Qualitative breast density was independently assigned by seven readers initially evaluating FFDM alone. Then, in a separate session, these same readers assigned breast density using synthetic views alone on the same 200 patients. The readers were again blinded to each other's assignment. Qualitative density assessment was based on BI-RADS fifth edition. Interreader agreement was evaluated with κ statistic using 95% confidence intervals. Testing for homogeneity in paired proportions was performed using McNemar's test with a level of significance of .05. For patients across the SM and standard 2-D data set, diagnostic testing with McNemar's test with P = 0.32 demonstrates that the minimal density transitions across FFDM and SM are not statistically significant density shifts. Taking clinical significance into account, only 8 of 200 (4%) patients had clinically significant transition (dense versus not dense). There was substantial interreader agreement with overall κ in FFDM of 0.71 (minimum 0.53, maximum 0.81) and overall SM κ average of 0.63 (minimum 0.56, maximum 0.87). Overall subjective breast density assignment by radiologists on SM is similar to density assignment on standard 2-D mammogram. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Calibration of Electret-Based Integral Radon Monitors Using NIST Polyethylene-Encapsulated 226Ra/222Rn Emanation (PERE) Standards

PubMed Central

Collé, R.; Kotrappa, P.; Hutchinson, J. M. R.

1995-01-01

The recently developed 222Rn emanation standards that are based on polyethylene-encapsulated 226Ra solutions were employed for a first field-measurement application test to demonstrate their efficacy in calibrating passive integral radon monitors. The performance of the capsules was evaluated with respect to the calibration needs of electret ionization chambers (E-PERM®, Rad Elec Inc.). The encapsulated standards emanate well-characterized and known quantities of 222Rn, and were used in two different-sized, relatively-small, accumulation vessels (about 3.6 L and 10 L) which also contained the deployed electret monitors under test. Calculated integral 222Rn activities from the capsules over various accumulation times were compared to the averaged electret responses. Evaluations were made with four encapsulated standards ranging in 226Ra activity from approximately 15 Bq to 540 Bq (with 222Rn emanation fractions of 0.888); over accumulation times from 1 d to 33 d; and with four different types of E-PERM detectors that were independently calibrated. The ratio of the electret chamber response ERn to the integral 222Rn activity IRn was constant (within statistical variations) over the variables of the specific capsule used, the accumulation volume, accumulation time, and detector type. The results clearly demonstrated the practicality and suitability of the encapsulated standards for providing a simple and readily-available calibration for those measurement applications. However, the mean ratio ERn/IRn was approximately 0.91, suggesting a possible systematic bias in the extant E-PERM calibrations. This 9 % systematic difference was verified by an independent test of the E-PERM calibration based on measurements with the NIST radon-in-water standard generator. PMID:29151765

Calibration of Electret-Based Integral Radon Monitors Using NIST Polyethylene-Encapsulated 226Ra/222Rn Emanation (PERE) Standards.

PubMed

Collé, R; Kotrappa, P; Hutchinson, J M R

1995-01-01

The recently developed 222 Rn emanation standards that are based on polyethylene-encapsulated 226 Ra solutions were employed for a first field-measurement application test to demonstrate their efficacy in calibrating passive integral radon monitors. The performance of the capsules was evaluated with respect to the calibration needs of electret ionization chambers (E-PERM ® , Rad Elec Inc.). The encapsulated standards emanate well-characterized and known quantities of 222 Rn, and were used in two different-sized, relatively-small, accumulation vessels (about 3.6 L and 10 L) which also contained the deployed electret monitors under test. Calculated integral 222 Rn activities from the capsules over various accumulation times were compared to the averaged electret responses. Evaluations were made with four encapsulated standards ranging in 226 Ra activity from approximately 15 Bq to 540 Bq (with 222 Rn emanation fractions of 0.888); over accumulation times from 1 d to 33 d; and with four different types of E-PERM detectors that were independently calibrated. The ratio of the electret chamber response E Rn to the integral 222 Rn activity I Rn was constant (within statistical variations) over the variables of the specific capsule used, the accumulation volume, accumulation time, and detector type. The results clearly demonstrated the practicality and suitability of the encapsulated standards for providing a simple and readily-available calibration for those measurement applications. However, the mean ratio E Rn / I Rn was approximately 0.91, suggesting a possible systematic bias in the extant E-PERM calibrations. This 9 % systematic difference was verified by an independent test of the E-PERM calibration based on measurements with the NIST radon-in-water standard generator.

7 CFR 51.2561 - Average moisture content.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Average moisture content. 51.2561 Section 51.2561 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL...

7 CFR 51.2561 - Average moisture content.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Average moisture content. 51.2561 Section 51.2561 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL...

7 CFR 51.2561 - Average moisture content.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Average moisture content. 51.2561 Section 51.2561 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL...

7 CFR 51.2548 - Average moisture content determination.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Average moisture content determination. 51.2548 Section 51.2548 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE...

7 CFR 51.2548 - Average moisture content determination.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Average moisture content determination. 51.2548 Section 51.2548 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE...

7 CFR 51.2548 - Average moisture content determination.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Average moisture content determination. 51.2548 Section 51.2548 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE...

7 CFR 51.2548 - Average moisture content determination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Average moisture content determination. 51.2548 Section 51.2548 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE...

7 CFR 51.2561 - Average moisture content.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Average moisture content. 51.2561 Section 51.2561 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL...

How Young Is Standard Average European?

ERIC Educational Resources Information Center

Haspelmath, Martin

1998-01-01

An analysis of Standard Average European, a European linguistic area, looks at 11 of its features (definite, indefinite articles, have-perfect, participial passive, antiaccusative prominence, nominative experiencers, dative external possessors, negation/negative pronouns, particle comparatives, A-and-B conjunction, relative clauses, verb fronting…

Impaired limb position sense after stroke: a quantitative test for clinical use.

PubMed

Carey, L M; Oke, L E; Matyas, T A

1996-12-01

A quantitative measure of wrist position sense was developed to advance clinical measurement of proprioceptive limb sensibility after stroke. Test-retest reliability, normative standards, and ability to discriminate impaired and unimpaired performance were investigated. Retest reliability was assessed over three sessions, and a matched-pairs study compared stroke and unimpaired subjects. Both wrists were tested, in counterbalanced order. Patients were tested in hospital-based rehabilitation units. Reliability was investigated on a consecutive sample of 35 adult stroke patients with a range of proprioceptive discrimination abilities and no evidence of neglect. A consecutive sample of 50 stroke patients and convenience sample of 50 healthy volunteers, matched for age, sex, and hand dominance, were tested in the normative-discriminative study. Age and sex were representative of the adult stroke population. The test required matching of imposed wrist positions using a pointer aligned with the axis of movement and a protractor scale. The test was reliable (r = .88 and .92) and observed changes of 8 degrees can be interpreted, with 95% confidence, as genuine. Scores of healthy volunteers ranged from 3.1 degrees to 10.9 degrees average error. The criterion of impairment was conservatively defined as 11 degrees (+/-4.8 degrees) average error. Impaired and unimpaired performance were well differentiated. Clinicians can confidently and quantitatively sample one aspect of proprioceptive sensibility in stroke patients using the wrist position sense test. Development of tests on other joints using the present approach is supported by our findings.

[How good are clinical investigative procedures for diagnosing meniscus lesions?].

PubMed

Jerosch, J; Riemer, S

2004-06-01

The purpose of this study was to evaluate different clinical meniscus tests. During 13 months we evaluated 64 patients with a suspected meniscus lesion in a prospective study. The age ranged from 16 to 76 years (average: 38.5 years). 66 % were male patients. Between the clinical examination and the arthroscopy there was no additional trauma to the knee. All patients were clinically examined in a standard manner by two independent orthopaedic surgeons. Clinical findings of the menisci were documented according to 12 well-described and commonly used meniscus tests. The arthroscopy was performed by a single surgeon who was not aware of the results of the clinical examination. This surgeon documented the intraarticular findings in a standardized operating report. A meniscus lesion/degeneration was documented when this was evident either by inspection or by palpation. The results showed either clinical meniscus tests with a high specificity and a low sensitivity or tests with a high sensitivity, but only a low specificity. We were not able to identify meniscus tests which showed both a high sensitivity and a high specificity. Even with access to MRI the clinical findings in knee joint with injured menisci still have a high diagnostic value. However, it seems to be necessary to combine different tests.

Respiratory gating enhances imaging of pulmonary nodules and measurement of tracer uptake in FDG PET/CT.

PubMed

Werner, Matthias K; Parker, J Anthony; Kolodny, Gerald M; English, Jeffrey R; Palmer, Matthew R

2009-12-01

The aim of this study was to evaluate prospectively the effects of respiratory gating during FDG PET/CT on the determination of lesion size and the measurement of tracer uptake in patients with pulmonary nodules in a clinical setting. Eighteen patients with known pulmonary nodules (nine women, nine men; mean age, 61.4 years) underwent conventional FDG PET/CT and respiratory-gated PET acquisitions during their scheduled staging examinations. Maximum, minimum, and average standardized uptake values (SUVs) and lesion size and volume were determined with and without respiratory gating. The results were then compared using the two-tailed Student's t test and the nonparametric Wilcoxon's test to assess the effects of respiratory gating on PET acquisitions. Respiratory gating reduced the measured area of lung lesions by 15.5%, the axial dimension by 10.3%, and the volume by 44.5% (p = 0.014, p = 0.007, and p = 0.025, respectively). The lesion volumes in gated studies were closer to those assessed by standard CT (difference decreased by 126.6%, p = 0.025). Respiratory gating increased the measured maximum SUV by 22.4% and average SUV by 13.3% (p < 0.001 and p = 0.002). Our findings suggest that the use of PET respiratory gating in PET/CT results in lesion volumes closer to those assessed by CT and improved measurements of tracer uptake for lesions in the lungs.

Determination of dissolved aluminum in water samples

USGS Publications Warehouse

Afifi, A.A.

1983-01-01

A technique has been modified for determination of a wide range of concentrations of dissolved aluminum (Al) in water and has been tested. In this technique, aluminum is complexed with 8-hydroxyquinoline at pH 8.3 to minimize interferences, then extracted with methyl isobutyl ketone (MIBK). The extract is analyzed colorimetrically at 395 nm. This technique is used to analyze two forms of monomeric Al, nonlabile (organic complexes) and labile (free, Al, Al sulfate, fluoride and hydroxide complexes). A detection limit 2 ug/L is possible with 25-ml samples and 10-ml extracts. The detection limit can be decreased by increasing the volume of the sample and (or) decreasing the volume of the methyl isobutyl ketone extract. The analytical uncertainty of this method is approximately + or - 5 percent. The standard addition technique provides a recovery test for this technique and ensures precision in samples of low Al concentrations. The average percentage recovery of the added Al plus the amount originally present was 99 percent. Data obtained from analyses of filtered standard solutions indicated that Al is adsorbed on various types of filters. However, the relationship between Al concentrations and adsorption remains linear. A test on standard solutions also indicated that Al is not adsorbed on nitric acid-washed polyethylene and polypropylene bottle wells. (USGS)

Differences in head impulse test results due to analysis techniques.

PubMed

Cleworth, Taylor W; Carpenter, Mark G; Honegger, Flurin; Allum, John H J

2017-01-01

Different analysis techniques are used to define vestibulo-ocular reflex (VOR) gain between eye and head angular velocity during the video head impulse test (vHIT). Comparisons would aid selection of gain techniques best related to head impulse characteristics and promote standardisation. Compare and contrast known methods of calculating vHIT VOR gain. We examined lateral canal vHIT responses recorded from 20 patients twice within 13 weeks of acute unilateral peripheral vestibular deficit onset. Ten patients were tested with an ICS Impulse system (GN Otometrics) and 10 with an EyeSeeCam (ESC) system (Interacoustics). Mean gain and variance were computed with area, average sample gain, and regression techniques over specific head angular velocity (HV) and acceleration (HA) intervals. Results for the same gain technique were not different between measurement systems. Area and average sample gain yielded equally lower variances than regression techniques. Gains computed over the whole impulse duration were larger than those computed for increasing HV. Gain over decreasing HV was associated with larger variances. Gains computed around peak HV were smaller than those computed around peak HA. The median gain over 50-70 ms was not different from gain around peak HV. However, depending on technique used, the gain over increasing HV was different from gain around peak HA. Conversion equations between gains obtained with standard ICS and ESC methods were computed. For low gains, the conversion was dominated by a constant that needed to be added to ESC gains to equal ICS gains. We recommend manufacturers standardize vHIT gain calculations using 2 techniques: area gain around peak HA and peak HV.

The Association Between Premedical Curricular and Admission Requirements and Medical School Performance and Residency Placement: A Study of Two Admission Routes.

PubMed

George, Paul; Park, Yoon Soo; Ip, Julianne; Gruppuso, Philip A; Adashi, Eli Y

2016-03-01

The curricular elements of undergraduate premedical education are the subject of an ongoing debate. The Warren Alpert Medical School of Brown University (AMS) matriculates students via the traditional premedical route (TPM) and an eight-year baccalaureate/MD program-the Program in Liberal Medical Education (PLME)-which provides students with a broad and liberal education. Using the juxtaposition of these two admission routes, the authors aimed to determine whether there is an association between highly distinct premedical curricular and admission requirements and medical school performance and residency placement. The cohorts studied included all of the PLME (n = 295) and TPM (n = 215) students who graduated from the AMS between 2010 and 2015. Outcome variables consisted of multiple measures of medical school performance, including standardized multiple-choice examination scores and honors grades, and residency placement. The authors employed unadjusted tests of averages and proportions (independent t tests and chi-square tests) to compare variables. The TPM students attained marginally, but statistically significantly, higher average scores on standardized multiple-choice examinations than their PLME counterparts. The number of undergraduate premedical science courses completed by PLME students accounted for less than 4% of the variance in key metrics of medical school performance. The residency placement record of the PLME and TPM cohorts proved comparable. These findings suggest that the association between medical school performance and residency placement and undergraduate premedical curricular and admission requirements is weak. Further study is needed to determine the optimal premedical preparation of students.

Development of fire-resistant wood structural panels

NASA Technical Reports Server (NTRS)

Vaughan, T. W.; Etzold, R.

1977-01-01

Structural panels made with Xylok 210 resin as the binder had a burn-through resistance at least equal to the structural panels made with Kerimid 500. Therefore, because of its comparative ease of handling, Xylok 210 was selected as the resin binder to provide the baseline panel for the study of a means of improving the flame-spread resistance of the structural panels. The final resin-filler system consisted of Xylok 210 binder with the addition of ammonium oxalate and ammonium phosphate to the strands of the surface layers, using 24% of each salt based upon the air-dry weight of the strands. This system resulted in a panel with a flame-spread code of about 60, a Class 2 classification. A standard phenolic based structural panel had a flame-spread greater than 200 for laboratory prepared panels. The burn-through tests indicated an average burn-through time of 588 seconds for the specimens made with the final system. This compares to an average burn-through time of 287 seconds for the standard phenolic base structural specimen. One full-size panel was made with the final system.

ALT space shuttle barometric altimeter altitude analysis

NASA Technical Reports Server (NTRS)

Killen, R.

1978-01-01

The accuracy was analyzed of the barometric altimeters onboard the space shuttle orbiter. Altitude estimates from the air data systems including the operational instrumentation and the developmental flight instrumentation were obtained for each of the approach and landing test flights. By comparing the barometric altitude estimates to altitudes derived from radar tracking data filtered through a Kalman filter and fully corrected for atmospheric refraction, the errors in the barometric altitudes were shown to be 4 to 5 percent of the Kalman altitudes. By comparing the altitude determined from the true atmosphere derived from weather balloon data to the altitude determined from the U.S. Standard Atmosphere of 1962, it was determined that the assumption of the Standard Atmosphere equations contributes roughly 75 percent of the total error in the baro estimates. After correcting the barometric altitude estimates using an average summer model atmosphere computed for the average latitude of the space shuttle landing sites, the residual error in the altitude estimates was reduced to less than 373 feet. This corresponds to an error of less than 1.5 percent for altitudes above 4000 feet for all flights.

Differences between recalculated and original Dobson total ozone data from Hradec Kralove, Czechoslovakia, 1962-1990

NASA Technical Reports Server (NTRS)

Vanicek, Karel

1994-01-01

Backward reevaluation of long-term total ozone measurements from the Solar and Ozone Observatory of Czech Hydrometeorological Institute at Hradec Kralove, Czechoslovakia, was performed for the period 1962-1990. The homogenization was carried out with respect to the calibration level of the World Primary Standard Spectrophotometer No. 83 - WPSS by means of day-by-day recalculations of more than 25,000 individual measurements using the R-N tables reconstructed after international comparisons and regular standard lamp tests of the Dobson spectrophotometer No. 74. The results showed significant differences among the recalculated data and those original ones published in the bulletins Ozone Data for the World. In the period 1962-1979 they reached 10-19 D.U. (3.0-5.5%) for annual averages and even 26 D.U. (7.0%) for monthly averages of total ozone. Such differences exceed several times accuracy of measuring and can significantly influence character of trends of total ozone in Central Europe. Therefore the results from Hradec Kralove support the calls for reevaluation of all historical Dobson total ozone data sets at individual stations of Global Ozone Observing System.

Long-term results of pars plana vitrectomy as an anti-inflammatory therapy of pediatric intermediate uveitis resistant to standard medical treatment.

PubMed

Darsová, Denisa; Pochop, Pavel; Štěpánková, Jana; Dotřelová, Dagmar

2018-01-01

To evaluate the efficacy of pars plana vitrectomy (PPV) as an anti-inflammatory therapy in pediatric recurrent intermediate uveitis. A retrospective study evaluated the long-term results of PPV indicated for intermediate uveitis with a mean observation period of 10.3 years (range 7-15.6 years) in 6 children (mean age 8 years, range 6-12 years). Pars plana vitrectomy was performed on 10 eyes in the standard manner and was initiated by vitreous sampling for laboratory examination. Data recorded were perioperative or postoperative vitrectomy complications, anatomic and functional results of PPV, and preoperative and postoperative best-corrected Snellen visual acuity. No perioperative or postoperative complications were observed. Bacteriologic, virologic, mycotic, and cytologic analysis of the vitreous was negative in all tested children. Five eyes were subsequently operated on for posterior subcapsular cataracts. An average preoperative visual acuity of 0.32 improved to an average postoperative visual acuity of 0.8. In the case of systemic immunosuppressive treatment failure in pediatric uveitis, particularly in eyes with cystoid macular edema, we recommend PPV relatively early.

Experimental evaluation of atmospheric effects on radiometric measurements using the EREP of Skylab. [Salton Sea and Great Salt Lake

NASA Technical Reports Server (NTRS)

Chang, D. T. (Principal Investigator); Isaacs, R. G.

1975-01-01

The author has identified the following significant results. Test sites were located near the Great Salt Lake and the Salton Sea. Calculations were performed for a set of atmospheric models corresponding to the test sites, in addition to standard models for summer and winter midlatitude atmospheres with respective integrated water vapor amount of 2.4 g/sq cm and 0.9 g/sq cm. Each atmosphere was found to contain an average amount of continental aerosol. Computations were valid for high solar elevation angles. Atmospheric attenuation quantities were computed in addition to simulated EREP S192 radiances.

[Precision and accuracy of a dental spectrophotometer in gingival color measurement of maxillary anterior gingival].

PubMed

Du, Yang; Tan, Jian-guo; Chen, Li; Wang, Fang-ping; Tan, Yao; Zhou, Jian-feng

2012-08-18

To explore a gingival shade matching method and to evaluate the precision and accuracy of a dental spectrophotometer modified to be used in gingival color measurement. Crystaleye, a dental spectrophotometer (Olympus, Tokyo, Japan) with a custom shading cover was tested. For precision assessment, two experienced experimenters measured anterior maxillary incisors five times for each tooth. A total of 20 healthy gingival sites (attached gingiva, free gingiva and medial gingival papilla in anterior maxillary region) were measured,the Commission Internationale de I' Eclairage (CIE) color parameters (CIE L*a*b*) of which were analyzed using the supporting software. For accuracy assessment, a rectangular area of approximately 3 mm×3 mm was chosen in the attached gingival portion for spectral analysis. PR715 (SpectraScan;Photo Research Inc.,California, USA), a spectroradiometer, was utilized as standard control. Average color differences (ΔE) between the values from PR715 and Crystaleye were calculated. In precision assessment,ΔL* between the values in all the test sites and average values were from(0.28±0.16)to(0.78±0.57), with Δa*and Δb* from(0.28±0.15)to (0.87±0.65),from(0.19±0.09)to( 0.58±0.78), respectively. Average ΔE between values in all test sites and average values were from (0.62 ± 0.17) to (1.25 ± 0.98) CIELAB units, with a total average ΔE(0.90 ± 0.18). In accuracy assessment, ΔL* with control device were from(0.58±0.50)to(2.22±1.89),with Δa*and Δb* from(1.03±0.67)to(2.99±1.32),from(0.68±0.78)to(1.26±0.83), respectively. Average ΔE with the control device were from (2.44±0.82) to (3.51±1.03) CIELAB units, with a total average ΔE (2.96 ± 1.08). With appropriate modification, Crystaleye, the spectrophotometer, has demonstrated relative minor color variations that can be useful in gingival color measurement.

Characterization of commercial rigid polyurethane foams used as bone analogs for implant testing.

PubMed

Calvert, Kayla L; Trumble, Kevin P; Webster, Thomas J; Kirkpatrick, Lynn A

2010-05-01

Mechanical properties and microstructure characterization of a series of graded commercial rigid polyurethane foams commonly used to mimic trabecular bone in testing orthopaedic devices is reported. Compressive testing conducted according to ASTM standard F1839-08, which requires large specimens (50.8 mm x 50.8 mm x 25.4 mm blocks) gave elastic modulus and compressive strength values ranging from 115 to 794 MPa and 4.7 to 24.7 MPa, respectively, for foams having densities of 0.240-0.641 g/cm(3). All these results were within the requirements of the specification for the corresponding grades. Compression testing using smaller specimens (7.5 mm diameter x 15 mm) typical of testing bone, gave results in good agreement with those obtained in the standard tests. Microstructural measurements showed the average pore size ranged from 125 to 234 microm for densities ranging from 0.641 to 0.159 g/cm(3), respectively. The relative modulus as a function of relative density of the foams fit well to the model of Gibson and Ashby. Cyclic testing revealed hysteresis in the lower density foams with a loading modulus statistically equivalent to that measured in monotonic testing. Shore DO durometry (hardness) measurements show good correlations to elastic modulus and compressive strength. The results suggest additional parameters to consider for the evaluation of polyurethane foams for bone analog applications.

49 CFR 533.4 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... or use of fuel injection), and catalyst usage. Limited product line light truck means a light truck..., DEPARTMENT OF TRANSPORTATION LIGHT TRUCK FUEL ECONOMY STANDARDS § 533.4 Definitions. (a) Statutory terms. (1) The terms average fuel economy, average fuel economy standard, fuel economy, import, manufacture...

49 CFR 533.4 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... or use of fuel injection), and catalyst usage. Limited product line light truck means a light truck..., DEPARTMENT OF TRANSPORTATION LIGHT TRUCK FUEL ECONOMY STANDARDS § 533.4 Definitions. (a) Statutory terms. (1) The terms average fuel economy, average fuel economy standard, fuel economy, import, manufacture...

Test and analysis of Celion 3000/PMR-15, graphite/polyimide bonded composite joints: Data report

NASA Technical Reports Server (NTRS)

Cushman, J. B.; Mccleskey, S. F.; Ward, S. H.

1982-01-01

Standard single lap, double lap and symmetric step lap bonded joints of Celion 3000/PMR-15 graphite/polyimide composite were evaluated. Composite to composite and composite to titanium joints were tested at 116 K (-250 F), 294 K (70 F) and 561 K (550 F). Joint parameters evaluated are lap length, adherend thickness, adherend axial stiffness, lamina stacking sequence and adherend tapering. Advanced joint concepts were examined to establish the change in performance of preformed adherends, scalloped adherends and hybrid systems. The material properties of the high temperature adhesive, designated A7F, used for bonding were established. The bonded joint tests resulted in interlaminar shear or peel failures of the composite and there were very few adhesive failures. Average test results agree with expected performance trends for the various test parameters. Results of finite element analyses and of test/analysis correlations are also presented.

Predictors of medical school clerkship performance: a multispecialty longitudinal analysis of standardized examination scores and clinical assessments.

PubMed

Casey, Petra M; Palmer, Brian A; Thompson, Geoffrey B; Laack, Torrey A; Thomas, Matthew R; Hartz, Martha F; Jensen, Jani R; Sandefur, Benjamin J; Hammack, Julie E; Swanson, Jerry W; Sheeler, Robert D; Grande, Joseph P

2016-04-27

Evidence suggests that poor performance on standardized tests before and early in medical school is associated with poor performance on standardized tests later in medical school and beyond. This study aimed to explore relationships between standardized examination scores (before and during medical school) with test and clinical performance across all core clinical clerkships. We evaluated characteristics of 435 students at Mayo Medical School (MMS) who matriculated 2000-2009 and for whom undergraduate grade point average, medical college aptitude test (MCAT), medical school standardized tests (United States Medical Licensing Examination [USMLE] 1 and 2; National Board of Medical Examiners [NBME] subject examination), and faculty assessments were available. We assessed the correlation between scores and assessments and determined USMLE 1 cutoffs predictive of poor performance (≤10th percentile) on the NBME examinations. We also compared the mean faculty assessment scores of MMS students vs visiting students, and for the NBME, we determined the percentage of MMS students who scored at or below the tenth percentile of first-time national examinees. MCAT scores correlated robustly with USMLE 1 and 2, and USMLE 1 and 2 independently predicted NBME scores in all clerkships. USMLE 1 cutoffs corresponding to poor NBME performance ranged from 220 to 223. USMLE 1 scores were similar among MMS and visiting students. For most academic years and clerkships, NBME scores were similar for MMS students vs all first-time examinees. MCAT, USMLE 1 and 2, and subsequent clinical performance parameters were correlated with NBME scores across all core clerkships. Even more interestingly, faculty assessments correlated with NBME scores, affirming patient care as examination preparation. USMLE 1 scores identified students at risk of poor performance on NBME subject examinations, facilitating and supporting implementation of remediation before the clinical years. MMS students were representative of medical students across the nation.

Effectiveness of Multimedia for Transplant Preparation for Kidney Transplant Waiting List Patients.

PubMed

Charoenthanakit, C; Junchotikul, P; Sittiudomsuk, R; Saiyud, A; Pratumphai, P

2016-04-01

A multimedia program could effectively advise patients about preparing for transplantation while on the waiting list for a kidney transplant. This study aimed to compare knowledge about transplant preparation for patients on a kidney transplant waiting list before and after participating in a multimedia program, and to evaluate patient satisfaction with the multimedia program. Research design was quasiexperimental with the use of 1 group. Subjects were 186 patients on the kidney transplant waiting list after HLA matching in Ramathibodi Hospital. The questionnaires were developed by the researchers. The statistical tools used were basic statistics, percentage, average, standard deviation, and the difference of score between before and after participation in the multimedia program (t test). The evaluation knowledge for transplant preparation for kidney transplant waiting list patients after participating in the multimedia program averaged 85.40%, and there was an increased improvement of score by an average 3.27 out of a possible full score of 20 (P < .05). The result of patient satisfaction for the multimedia program had good average, 4.58. Copyright © 2016 Elsevier Inc. All rights reserved.

Calculation of Multistage Turbomachinery Using Steady Characteristic Boundary Conditions

NASA Technical Reports Server (NTRS)

Chima, Rodrick V.

1998-01-01

A multiblock Navier-Stokes analysis code for turbomachinery has been modified to allow analysis of multistage turbomachines. A steady averaging-plane approach was used to pass information between blade rows. Characteristic boundary conditions written in terms of perturbations about the mean flow from the neighboring blade row were used to allow close spacing between the blade rows without forcing the flow to be axisymmetric. In this report the multiblock code is described briefly and the characteristic boundary conditions and the averaging-plane implementation are described in detail. Two approaches for averaging the flow properties are also described. A two-dimensional turbine stator case was used to compare the characteristic boundary conditions with standard axisymmetric boundary conditions. Differences were apparent but small in this low-speed case. The two-stage fuel turbine used on the space shuttle main engines was then analyzed using a three-dimensional averaging-plane approach. Computed surface pressure distributions on the stator blades and endwalls and computed distributions of blade surface heat transfer coefficient on three blades showed very good agreement with experimental data from two tests.

Fine-grained information extraction from German transthoracic echocardiography reports.

PubMed

Toepfer, Martin; Corovic, Hamo; Fette, Georg; Klügl, Peter; Störk, Stefan; Puppe, Frank

2015-11-12

Information extraction techniques that get structured representations out of unstructured data make a large amount of clinically relevant information about patients accessible for semantic applications. These methods typically rely on standardized terminologies that guide this process. Many languages and clinical domains, however, lack appropriate resources and tools, as well as evaluations of their applications, especially if detailed conceptualizations of the domain are required. For instance, German transthoracic echocardiography reports have not been targeted sufficiently before, despite of their importance for clinical trials. This work therefore aimed at development and evaluation of an information extraction component with a fine-grained terminology that enables to recognize almost all relevant information stated in German transthoracic echocardiography reports at the University Hospital of Würzburg. A domain expert validated and iteratively refined an automatically inferred base terminology. The terminology was used by an ontology-driven information extraction system that outputs attribute value pairs. The final component has been mapped to the central elements of a standardized terminology, and it has been evaluated according to documents with different layouts. The final system achieved state-of-the-art precision (micro average.996) and recall (micro average.961) on 100 test documents that represent more than 90 % of all reports. In particular, principal aspects as defined in a standardized external terminology were recognized with f 1=.989 (micro average) and f 1=.963 (macro average). As a result of keyword matching and restraint concept extraction, the system obtained high precision also on unstructured or exceptionally short documents, and documents with uncommon layout. The developed terminology and the proposed information extraction system allow to extract fine-grained information from German semi-structured transthoracic echocardiography reports with very high precision and high recall on the majority of documents at the University Hospital of Würzburg. Extracted results populate a clinical data warehouse which supports clinical research.

Supporting diagnosis of attention-deficit hyperactive disorder with novelty detection.

PubMed

Lee, Hyoung-Joo; Cho, Sungzoon; Shin, Min-Sup

2008-03-01

Computerized continuous performance test (CPT) is a widely used diagnostic tool for attention-deficit hyperactivity disorder (ADHD). It measures the number of correctly detected stimuli as well as response times. Typically, when calculating a cut-off score for discriminating between normal and abnormal, only the normal children's data are collected. Then the average and standard deviation of each measure or variable is computed. If any of variables is larger than 2 sigma above the average, that child is diagnosed as abnormal. We will call this approach as "T-score 70" classifier. However, its performance has a lot to be desired due to a high false negative error. In order to improve the classification accuracy we propose to use novelty detection approaches for supporting ADHD diagnosis. Novelty detection is a model building framework where a classifier is constructed using only one class of training data and a new input pattern is classified according to its similarity to the training data. A total of eight novelty detectors are introduced and applied to our ADHD datasets collected from two modes of tests, visual and auditory. They are evaluated and compared with the T-score model on validation datasets in terms of false positive and negative error rates, and area under receiver operating characteristics curve (AuROC). Experimental results show that the cut-off score of 70 is suboptimal which leads to a low false positive error but a very high false negative error. A few novelty detectors such as Parzen density estimators yield much more balanced classification performances. Moreover, most novelty detectors outperform the T-score method for most age groups statistically with a significance level of 1% in terms of AuROC. In particular, we recommend the Parzen and Gaussian density estimators, kernel principal component analysis, one-class support vector machine, and K-means clustering novelty detector which can improve upon the T-score method on average by at least 30% for the visual test and 40% for the auditory test. In addition, their performances are relatively stable over various parameter values as long as they are within reasonable ranges. The proposed novelty detection approaches can replace the T-score method which has been considered the "gold standard" for supporting ADHD diagnosis. Furthermore, they can be applied to other psychological tests where only normal data are available.

Teaching science through literature

NASA Astrophysics Data System (ADS)

Barth, Daniel

2007-12-01

The hypothesis of this study was that a multidisciplinary, activity rich science curriculum based around science fiction literature, rather than a conventional text book would increase student engagement with the curriculum and improve student performance on standards-based test instruments. Science fiction literature was chosen upon the basis of previous educational research which indicated that science fiction literature was able to stimulate and maintain interest in science. The study was conducted on a middle school campus during the regular summer school session. Students were self-selected from the school's 6 th, 7th, and 8th grade populations. The students used the science fiction novel Maurice on the Moon as their only text. Lessons and activities closely followed the adventures of the characters in the book. The student's initial level of knowledge in Earth and space science was assessed by a pre test. After the four week program was concluded, the students took a post test made up of an identical set of questions. The test included 40 standards-based questions that were based upon concepts covered in the text of the novel and in the classroom lessons and activities. The test also included 10 general knowledge questions that were based upon Earth and space science standards that were not covered in the novel or the classroom lessons or activities. Student performance on the standards-based question set increased an average of 35% for all students in the study group. Every subgroup disaggregated by gender and ethnicity improved from 28-47%. There was no statistically significant change in the performance on the general knowledge question set for any subgroup. Student engagement with the material was assessed by three independent methods, including student self-reports, percentage of classroom work completed, and academic evaluation of student work by the instructor. These assessments of student engagement were correlated with changes in student performance on the standards-based assessment tests. A moderate correlation was found to exist between the level of student engagement with the material and improvement in performance from pre to post test.

Longitudinal analysis of receptive vocabulary growth in young Spanish English-speaking children from migrant families.

PubMed

Jackson, Carla Wood; Schatschneider, Christopher; Leacox, Lindsey

2014-01-01

The authors of this study described developmental trajectories and predicted kindergarten performance of Spanish and English receptive vocabulary acquisition of young Latino/a English language learners (ELLs) from socioeconomically disadvantaged migrant families. In addition, the authors examined the extent to which gender and individual initial performance in Spanish predict receptive vocabulary performance and growth rate. The authors used hierarchical linear modeling of 64 children's receptive vocabulary performance to generate growth trajectories, predict performance at school entry, and examine potential predictors of rate of growth. The timing of testing varied across children. The ELLs (prekindergarten to 2nd grade) participated in 2-5 testing sessions, each 6-12 months apart. The ELLs' average predicted standard score on an English receptive vocabulary at kindergarten was nearly 2 SDs below the mean for monolingual peers. Significant growth in the ELLs' receptive vocabulary was observed between preschool and 2nd grade, indicating that the ELLs were slowly closing the receptive vocabulary gap, although their average score remained below the standard score mean for age-matched monolingual peers. The ELLs demonstrated a significant decrease in Spanish receptive vocabulary standard scores over time. Initial Spanish receptive vocabulary was a significant predictor of growth in English receptive vocabulary. High initial Spanish receptive vocabulary was associated with greater growth in English receptive vocabulary and decelerated growth in Spanish receptive vocabulary. Gender was not a significant predictor of growth in either English or Spanish receptive vocabulary. ELLs from low socioeconomic backgrounds may be expected to perform lower in English compared with their monolingual English peers in kindergarten. Performance in Spanish at school entry may be useful in identifying children who require more intensive instructional support for English vocabulary growth. Findings substantiate the need for progress monitoring across the early school years.

Example of monitoring measurements in a virtual eye clinic using 'big data'.

PubMed

Jones, Lee; Bryan, Susan R; Miranda, Marco A; Crabb, David P; Kotecha, Aachal

2017-10-26

To assess the equivalence of measurement outcomes between patients attending a standard glaucoma care service, where patients see an ophthalmologist in a face-to-face setting, and a glaucoma monitoring service (GMS). The average mean deviation (MD) measurement on the visual field (VF) test for 250 patients attending a GMS were compared with a 'big data' repository of patients attending a standard glaucoma care service (reference database). In addition, the speed of VF progression between GMS patients and reference database patients was compared. Reference database patients were used to create expected outcomes that GMS patients could be compared with. For GMS patients falling outside of the expected limits, further analysis was carried out on the clinical management decisions for these patients. The average MD of patients in the GMS ranged from +1.6 dB to -18.9 dB between two consecutive appointments at the clinic. In the first analysis, 12 (4.8%; 95% CI 2.5% to 8.2%) GMS patients scored outside the 90% expected values based on the reference database. In the second analysis, 1.9% (95% CI 0.4% to 5.4%) GMS patients had VF changes outside of the expected 90% limits. Using 'big data' collected in the standard glaucoma care service, we found that patients attending a GMS have equivalent outcomes on the VF test. Our findings provide support for the implementation of virtual healthcare delivery in the hospital eye service. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A job-related fitness test for the Dutch police.

PubMed

Strating, M; Bakker, R H; Dijkstra, G J; Lemmink, K A P M; Groothoff, J W

2010-06-01

The variety of tasks that characterize police work highlights the importance of being in good physical condition. To take a first step at standardizing the administration of a job-related test to assess a person's ability to perform the physical demands of the core tasks of police work. The principal research questions were: are test scores related to gender, age and function and are test scores related to body mass index (BMI) and the number of hours of physical exercise? Data of 6999 police officers, geographically spread over all parts of The Netherlands, who completed a physical competence test over a 1 year period were analysed. Women performed the test significantly more slowly than men. The mean test score was also related to age; the older a person the longer it took to complete the test. A higher BMI was associated with less hours of body exercise a week and a slower test performance, both in women and men. The differences in individual test scores, based on gender and age, have implications for future strategy within the police force. From a viewpoint of 'same job, same standard' one has to accept that test-score differences may lead to the exclusion of certain staff. However, from a viewpoint of 'diversity as a business issue', one may have to accept that on average, both female and older police officers are physically less tailored to their jobs than their male and younger colleagues.

Development of improved electroforming technique. [for fabricating regeneratively cooled thrust chambers

NASA Technical Reports Server (NTRS)

Mccandles, L. C.; Davies, L. G.

1973-01-01

Techniques were studied to reinforce or strengthen electroformed nickel to allow a fuller utilization of electroforming as a reliable and low cost fabrication technique for regenerately cooled thrust chambers. Techniques for wire wrapping while electrodepositing were developed that can result in a structurally strong wall with less weight than a conventional electroformed wall. Also a technique of codepositing submicron sized THO2 particles with the nickel to form a dispersion strengthened structure was evaluated. The standard nickel cylinders exhibited an average hoop strength of 80,000 psi with a yield strength of 65,000 psi and a modulus of 25.6 x 10 to the 6th power psi. The as produced dispersion strengthened nickel showed a hoop strength of 97,000 psi with a yield strength of 67,000 psi. This is an increase of 17,000 psi or 21% over the standard nickel hoop strength. The wire wrapping cylinders showed an increased strength over the standard nickel test samples of 26,000 to 66,800 psi which is in the range of 26 to 104% increase in strength over the base standard nickel. These latter test results are indicative of a volume percent wire reinforcement from 15 to 31. The measured hoop strengths agree with calculated composite strengths based upon rule of mixtures.

Evaluating the reliability of an injury prevention screening tool: Test-retest study.

PubMed

Gittelman, Michael A; Kincaid, Madeline; Denny, Sarah; Wervey Arnold, Melissa; FitzGerald, Michael; Carle, Adam C; Mara, Constance A

2016-10-01

A standardized injury prevention (IP) screening tool can identify family risks and allow pediatricians to address behaviors. To assess behavior changes on later screens, the tool must be reliable for an individual and ideally between household members. Little research has examined the reliability of safety screening tool questions. This study utilized test-retest reliability of parent responses on an existing IP questionnaire and also compared responses between household parents. Investigators recruited parents of children 0 to 1 year of age during admission to a tertiary care children's hospital. When both parents were present, one was chosen as the "primary" respondent. Primary respondents completed the 30-question IP screening tool after consent, and they were re-screened approximately 4 hours later to test individual reliability. The "second" parent, when present, only completed the tool once. All participants received a 10-dollar gift card. Cohen's Kappa was used to estimate test-retest reliability and inter-rater agreement. Standard test-retest criteria consider Kappa values: 0.0 to 0.40 poor to fair, 0.41 to 0.60 moderate, 0.61 to 0.80 substantial, and 0.81 to 1.00 as almost perfect reliability. One hundred five families participated, with five lost to follow-up. Thirty-two (30.5%) parent dyads completed the tool. Primary respondents were generally mothers (88%) and Caucasian (72%). Test-retest of the primary respondents showed their responses to be almost perfect; average 0.82 (SD = 0.13, range 0.49-1.00). Seventeen questions had almost perfect test-retest reliability and 11 had substantial reliability. However, inter-rater agreement between household members for 12 objective questions showed little agreement between responses; inter-rater agreement averaged 0.35 (SD = 0.34, range -0.19-1.00). One question had almost perfect inter-rater agreement and two had substantial inter-rater agreement. The IP screening tool used by a single individual had excellent test-retest reliability for nearly all questions. However, when a reporter changes from pre- to postintervention, differences may reflect poor reliability or different subjective experiences rather than true change.

Chroma sampling and modulation techniques in high dynamic range video coding

NASA Astrophysics Data System (ADS)

Dai, Wei; Krishnan, Madhu; Topiwala, Pankaj

2015-09-01

High Dynamic Range and Wide Color Gamut (HDR/WCG) Video Coding is an area of intense research interest in the engineering community, for potential near-term deployment in the marketplace. HDR greatly enhances the dynamic range of video content (up to 10,000 nits), as well as broadens the chroma representation (BT.2020). The resulting content offers new challenges in its coding and transmission. The Moving Picture Experts Group (MPEG) of the International Standards Organization (ISO) is currently exploring coding efficiency and/or the functionality enhancements of the recently developed HEVC video standard for HDR and WCG content. FastVDO has developed an advanced approach to coding HDR video, based on splitting the HDR signal into a smoothed luminance (SL) signal, and an associated base signal (B). Both signals are then chroma downsampled to YFbFr 4:2:0 signals, using advanced resampling filters, and coded using the Main10 High Efficiency Video Coding (HEVC) standard, which has been developed jointly by ISO/IEC MPEG and ITU-T WP3/16 (VCEG). Our proposal offers both efficient coding, and backwards compatibility with the existing HEVC Main10 Profile. That is, an existing Main10 decoder can produce a viewable standard dynamic range video, suitable for existing screens. Subjective tests show visible improvement over the anchors. Objective tests show a sizable gain of over 25% in PSNR (RGB domain) on average, for a key set of test clips selected by the ISO/MPEG committee.

49 CFR 525.4 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.4 Definitions. (a... section 501 of the Act. (2) The terms average fuel economy, fuel economy, and model type are used as... economy standard are requested under this part; Production mix means the number of passenger automobiles...

49 CFR 525.6 - Requirements for petition.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.6 Requirements... arguments of the petitioner supporting the exemption and alternative average fuel economy standard requested... analyses used to develop that information and data. No documents may be incorporated by reference in a...

Draft environmental impact statement : corporate average fuel economy standards, passenger cars and light trucks, model years 2011-2015.

DOT National Transportation Integrated Search

2008-06-01

The National Highway Traffic Safety Administration (NHTSA) has prepared this Draft Environmental Impact Statement (DEIS) to disclose and analyze the potential environmental impacts of the proposed new Corporate Average Fuel Economy (CAFE) standards a...

N2/O2/H2 Dual-Pump Cars: Validation Experiments

NASA Technical Reports Server (NTRS)

OByrne, S.; Danehy, P. M.; Cutler, A. D.

2003-01-01

The dual-pump coherent anti-Stokes Raman spectroscopy (CARS) method is used to measure temperature and the relative species densities of N2, O2 and H2 in two experiments. Average values and root-mean-square (RMS) deviations are determined. Mean temperature measurements in a furnace containing air between 300 and 1800 K agreed with thermocouple measurements within 26 K on average, while mean mole fractions agree to within 1.6 % of the expected value. The temperature measurement standard deviation averaged 64 K while the standard deviation of the species mole fractions averaged 7.8% for O2 and 3.8% for N2, based on 200 single-shot measurements. Preliminary measurements have also been performed in a flat-flame burner for fuel-lean and fuel-rich flames. Temperature standard deviations of 77 K were measured, and the ratios of H2 to N2 and O2 to N2 respectively had standard deviations from the mean value of 12.3% and 10% of the measured ratio.

Comparison of the Vitek 2 Antifungal Susceptibility System with the Clinical and Laboratory Standards Institute (CLSI) and European Committee on Antimicrobial Susceptibility Testing (EUCAST) Broth Microdilution Reference Methods and with the Sensititre YeastOne and Etest Techniques for In Vitro Detection of Antifungal Resistance in Yeast Isolates ▿ ‖

PubMed Central

Cuenca-Estrella, Manuel; Gomez-Lopez, Alicia; Alastruey-Izquierdo, Ana; Bernal-Martinez, Leticia; Cuesta, Isabel; Buitrago, Maria J.; Rodriguez-Tudela, Juan L.

2010-01-01

The commercial technique Vitek 2 system for antifungal susceptibility testing of yeast species was evaluated. A collection of 154 clinical yeast isolates, including amphotericin B- and azole-resistant organisms, was tested. Results were compared with those obtained by the reference procedures of both the CLSI and the European Committee on Antimicrobial Susceptibility Testing (EUCAST). Two other commercial techniques approved for clinical use, the Etest and the Sensititre YeastOne, were included in the comparative exercise as well. The average essential agreement (EA) between the Vitek 2 system and the reference procedures was >95%, comparable with the average EAs observed between the reference procedures and the Sensititre YeastOne and Etest. The EA values were >97% for Candida spp. and stood at 92% for Cryptococcus neoformans. Intraclass correlation coefficients (ICC) between the commercial techniques and the reference procedures were statistically significant (P < 0.01). Percentages of very major errors were 2.6% between Vitek 2 and the EUCAST technique and 1.6% between Vitek 2 and the CLSI technique. The Vitek 2 MIC results were available after 14 to 18 h of incubation for all Candida spp. (average time to reading, 15.5 h). The Vitek 2 system was shown to be a reliable technique to determine antifungal susceptibility testing of yeast species and a more rapid and easier alternative for clinical laboratories than the procedures developed by either the CLSI or EUCAST. PMID:20220169

Internationally adopted children in the early school years: relative strengths and weaknesses in language abilities.

PubMed

Glennen, Sharon

2015-01-01

This study aimed to determine the relative strengths and weaknesses in language and verbal short-term memory abilities of school-age children who were adopted from Eastern Europe. Children adopted between 1;0 and 4;11 (years;months) of age were assessed with the Clinical Evaluation of Language Fundamentals-Preschool, Second Edition (CELF-P2) and the Clinical Evaluation of Language Fundamentals, Fourth Edition (CELF-4) at age 5 and ages 6-7. Language composites and subtests were compared across time. All CELF-P2 and CELF-4 mean scores fell in the average range. Receptive composites were 102.74 and 103.86, and expressive composites were 100.58 and 98.42, at age 5 and ages 6-7, respectively. Age of adoption did not correlate to test scores. At ages 6-7, receptive language, sentence formulation, and vocabulary were areas of strength, with subtest scores significantly better than test norms. Verbal short-term memory and expressive grammar subtest scores were within the average range but significantly worse than test norms. A high percentage of children scored 1 standard deviation below the mean on these 2 subtests (27.3%-34.1%). Eastern European adoptees had average scores on a variety of language tests. Vocabulary was a relative strength; enriching the environment substantially improved this language area. Verbal short-term memory and expressive grammar were relative weaknesses. Children learning a language later in life may have difficulty with verbal short-term memory, which leads to weaknesses in expressive syntax and grammar.

A randomized trial of the effect of automated ventricular capture on device longevity and threshold measurement in pacemaker patients.

PubMed

Koplan, Bruce A; Gilligan, David M; Nguyen, Luc S; Lau, Theodore K; Thackeray, Lisa M; Berg, Kellie Chase

2008-11-01

An automatic capture (AC) algorithm adjusts ventricular pacing output to capture the ventricle while optimizing output to 0.5 V above threshold. AC maintains this output and confirms capture on a beat-to-beat basis in bipolar and unipolar pacing and sensing. To assess the AC algorithm and its impact on device longevity. Patients implanted with a pacemaker were randomized 1:1 to have the AC feature on or off for 12 months. Two threshold tests were conducted at each visit- automatic threshold and manual threshold. Average ventricular voltage output and projected device longevity were compared between AC on and off using nonparametric tests. Nine hundred ten patients were enrolled and underwent device implantation. Average ventricular voltage output was 1.6 V for the AC on arm (n = 444) and 3.1 V for the AC off arm (n = 446) (P < 0.001). Projected device longevity was 10.3 years for AC on and 8.9 years for AC off (P < 0.0001), or a 16% increase in longevity for AC on. The proportion of patients in whom there was a difference between automatic threshold and manual threshold of

Pilot study of a novel tool for input-free automated identification of transition zone prostate tumors using T2- and diffusion-weighted signal and textural features.

PubMed

Stember, Joseph N; Deng, Fang-Ming; Taneja, Samir S; Rosenkrantz, Andrew B

2014-08-01

To present results of a pilot study to develop software that identifies regions suspicious for prostate transition zone (TZ) tumor, free of user input. Eight patients with TZ tumors were used to develop the model by training a Naïve Bayes classifier to detect tumors based on selection of most accurate predictors among various signal and textural features on T2-weighted imaging (T2WI) and apparent diffusion coefficient (ADC) maps. Features tested as inputs were: average signal, signal standard deviation, energy, contrast, correlation, homogeneity and entropy (all defined on T2WI); and average ADC. A forward selection scheme was used on the remaining 20% of training set supervoxels to identify important inputs. The trained model was tested on a different set of ten patients, half with TZ tumors. In training cases, the software tiled the TZ with 4 × 4-voxel "supervoxels," 80% of which were used to train the classifier. Each of 100 iterations selected T2WI energy and average ADC, which therefore were deemed the optimal model input. The two-feature model was applied blindly to the separate set of test patients, again without operator input of suspicious foci. The software correctly predicted presence or absence of TZ tumor in all test patients. Furthermore, locations of predicted tumors corresponded spatially with locations of biopsies that had confirmed their presence. Preliminary findings suggest that this tool has potential to accurately predict TZ tumor presence and location, without operator input. © 2013 Wiley Periodicals, Inc.

40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

Code of Federal Regulations, 2010 CFR

2010-07-01

... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

Code of Federal Regulations, 2011 CFR

2011-07-01

... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

Code of Federal Regulations, 2013 CFR

2013-07-01

... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

Code of Federal Regulations, 2014 CFR

2014-07-01

... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

Characterization of the NASA Langley Arc Heated Scramjet Test Facility Using NO PLIF

NASA Technical Reports Server (NTRS)

Kidd, F. Gray, III; Narayanaswamy, Venkateswaran; Danehy, Paul M.; Inman, Jennifer A.; Bathel, Brett F.; Cabell, Karen F.; Hass, Neal E.; Capriotti, Diego P.; Drozda, Tomasz G.; Johansen, Criag T.

2014-01-01

The nitric oxide planar laser-induced fluorescence (NO PLIF) imaging was used to characterize the air flow of the NASA Langley Arc Heated Scramjet Test Facility (AHSTF) configured with a Mach 6 nozzle. The arc raises the enthalpy of the test gas in AHSTF, producing nitric oxide. Nitric oxide persists as the temperature drops through the nozzle into the test section. NO PLIF was used to qualitatively visualize the flowfield at different experimental conditions, measure the temperature of the gas flow exiting the facility nozzle, and visualize the wave structure downstream of the nozzle at different operating conditions. Uniformity and repeatability of the nozzle flow were assessed. Expansion and compression waves on the free-jet shear layer as the nozzle flow expands into the test section were visualized. The main purpose of these experiments was to assess the uniformity of the NO in the freestream gas for planned experiments, in which NO PLIF will be used for qualitative fuel-mole-fraction sensitive imaging. The shot-to-shot fluctuations in the PLIF signal, caused by variations in the overall laser intensity as well as NO concentration and temperature variations in the flow was 20-25% of the mean signal, as determined by taking the standard deviation of a set of images obtained at constant conditions and dividing by the mean. The fluctuations within individual images, caused by laser sheet spatial variations as well as NO concentration and temperature variations in the flow, were about 28% of the mean in images, determined by taking standard deviation within individual images, dividing by the mean in the same image and averaged over the set of images. Applying an averaged laser sheet intensity correction reduced the within-image intensity fluctuations to about 10% suggesting that the NO concentration is uniform to within 10%. There was no significant difference in flow uniformity between the low and high enthalpy settings. While not strictly quantitative, the temperature maps show qualitative agreement with the computations of the flow.

The influence of outliers on results of wet deposition measurements as a function of measurement strategy

NASA Astrophysics Data System (ADS)

Slanina, J.; Möls, J. J.; Baard, J. H.

The results of a wet deposition monitoring experiment, carried out by eight identical wet-only precipitation samplers operating on the basis of 24 h samples, have been used to investigate the accuracy and uncertainties in wet deposition measurements. The experiment was conducted near Lelystad, The Netherlands over the period 1 March 1983-31 December 1985. By rearranging the data for one to eight samplers and sampling periods of 1 day to 1 month both systematic and random errors were investigated as a function of measuring strategy. A Gaussian distribution of the results was observed. Outliers, detected by a Dixon test ( a = 0.05) influenced strongly both the yearly averaged results and the standard deviation of this average as a function of the number of samplers and the length of the sampling period. The systematic bias in bulk elements, using one sampler, varies typically from 2 to 20% and for trace elements from 10 to 500%, respectively. Severe problems are encountered in the case of Zn, Cu, Cr, Ni and especially Cd. For the sensitive detection of trends generally more than one sampler per measuring station is necessary as the standard deviation in the yearly averaged wet deposition is typically 10-20% relative for one sampler. Using three identical samplers, trends of, e.g. 3% per year will be generally detected in 6 years.

Energy balance and mass conservation in reduced order models of fluid flows

NASA Astrophysics Data System (ADS)

Mohebujjaman, Muhammad; Rebholz, Leo G.; Xie, Xuping; Iliescu, Traian

2017-10-01

In this paper, we investigate theoretically and computationally the conservation properties of reduced order models (ROMs) for fluid flows. Specifically, we investigate whether the ROMs satisfy the same (or similar) energy balance and mass conservation as those satisfied by the Navier-Stokes equations. All of our theoretical findings are illustrated and tested in numerical simulations of a 2D flow past a circular cylinder at a Reynolds number Re = 100. First, we investigate the ROM energy balance. We show that using the snapshot average for the centering trajectory (which is a popular treatment of nonhomogeneous boundary conditions in ROMs) yields an incorrect energy balance. Then, we propose a new approach, in which we replace the snapshot average with the Stokes extension. Theoretically, the Stokes extension produces an accurate energy balance. Numerically, the Stokes extension yields more accurate results than the standard snapshot average, especially for longer time intervals. Our second contribution centers around ROM mass conservation. We consider ROMs created using two types of finite elements: the standard Taylor-Hood (TH) element, which satisfies the mass conservation weakly, and the Scott-Vogelius (SV) element, which satisfies the mass conservation pointwise. Theoretically, the error estimates for the SV-ROM are sharper than those for the TH-ROM. Numerically, the SV-ROM yields significantly more accurate results, especially for coarser meshes and longer time intervals.

Development and Testing of a Novel Standard Particle for Performance Verification of Biodefense/Bioterrorism Detection Systems

DTIC Science & Technology

2003-11-19

Higher boiling point (29.4o F) 39.5 1.36 1,1- difluoroethane HFA 152a – Not used for pharmaceutical inhalers , is used for personal products Boiling...technologies have been implemented. One aspect of this rapid development that has kept biodetection Page 1 Report Documentation Page Form...ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for

Thermal sensing of cryogenic wind tunnel model surfaces Evaluation of silicon diodes

NASA Technical Reports Server (NTRS)

Daryabeigi, K.; Ash, R. L.; Dillon-Townes, L. A.

1986-01-01

Different sensors and installation techniques for surface temperature measurement of cryogenic wind tunnel models were investigated. Silicon diodes were selected for further consideration because of their good inherent accuracy. Their average absolute temperature deviation in comparison tests with standard platinum resistance thermometers was found to be 0.2 K in the range from 125 to 273 K. Subsurface temperature measurement was selected as the installation technique in order to minimize aerodynamic interference. Temperature distortion caused by an embedded silicon diode was studied numerically.

Thermal sensing of cryogenic wind tunnel model surfaces - Evaluation of silicon diodes

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Ash, Robert L.; Dillon-Townes, Lawrence A.

1986-01-01

Different sensors and installation techniques for surface temperature measurement of cryogenic wind tunnel models were investigated. Silicon diodes were selected for further consideration because of their good inherent accuracy. Their average absolute temperature deviation in comparison tests with standard platinum resistance thermometers was found to be 0.2 K in the range from 125 to 273 K. Subsurface temperature measurement was selected as the installation technique in order to minimize aerodynamic interference. Temperature distortion caused by an embedded silicon diode was studied numerically.

Normobaric Hypoxia as a Cognitive Stress Test for Mild Traumatic Brain Injury: Oculometrics, Pulse Oximetry, and the Self Report of Symptom Severity

DTIC Science & Technology

2011-06-20

USAMRMC Reg 70-25 on Use of Volunteers in Research. Standard Form 298 (Rev. 8 /98) REPORT DOCUMENTATION PAGE Prescribed by ANSI Std. Z39.18 Form...ORGANIZATION NAME(S) AND ADDRESS(ES) 8 . PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR...group of control subjects ......................................28  8 . Saccadic velocity as a function of hypoxic condition averaged for the group of mild

Viability of Commercially Available Bleach for Water Treatment in Developing Countries

PubMed Central

2009-01-01

Treating household water with low-cost, widely available commercial bleach is recommended by some organizations to improve water quality and reduce disease in developing countries. I analyzed the chlorine concentration of 32 bleaches from 12 developing countries; the average error between advertised and measured concentration was 35% (range = –45%–100%; standard deviation = 40%). Because of disparities between advertised and actual concentration, the use of commercial bleach for water treatment in developing countries is not recommended without ongoing quality control testing. PMID:19762657

Viability of commercially available bleach for water treatment in developing countries.

PubMed

Lantagne, Daniele S

2009-11-01

Treating household water with low-cost, widely available commercial bleach is recommended by some organizations to improve water quality and reduce disease in developing countries. I analyzed the chlorine concentration of 32 bleaches from 12 developing countries; the average error between advertised and measured concentration was 35% (range = -45%-100%; standard deviation = 40%). Because of disparities between advertised and actual concentration, the use of commercial bleach for water treatment in developing countries is not recommended without ongoing quality control testing.

A standardized tritrophic small-scale system (TriCosm) for the assessment of stressor-induced effects on aquatic community dynamics.

PubMed

Riedl, Verena; Agatz, Annika; Benstead, Rachel; Ashauer, Roman

2018-04-01

Chemical impacts on the environment are routinely assessed in single-species tests. They are employed to measure direct effects on nontarget organisms, but indirect effects on ecological interactions can only be detected in multispecies tests. Micro- and mesocosms are more complex and environmentally realistic, yet they are less frequently used for environmental risk assessment because resource demand is high, whereas repeatability and statistical power are often low. Test systems fulfilling regulatory needs (i.e., standardization, repeatability, and replication) and the assessment of impacts on species interactions and indirect effects are lacking. In the present study we describe the development of the TriCosm, a repeatable aquatic multispecies test with 3 trophic levels and increased statistical power. High repeatability of community dynamics of 3 interacting aquatic populations (algae, Ceriodaphnia, and Hydra) was found with an average coefficient of variation of 19.5% and the ability to determine small effect sizes. The TriCosm combines benefits of both single-species tests (fulfillment of regulatory requirements) and complex multispecies tests (ecological relevance) and can be used, for instance, at an intermediate tier in environmental risk assessment. Furthermore, comparatively quickly generated population and community toxicity data can be useful for the development and testing of mechanistic effect models. Environ Toxicol Chem 2018;37:1051-1060. © 2017 SETAC. © 2017 SETAC.

Evaluation of autonomous recording units for detecting 3 species of secretive marsh birds

USGS Publications Warehouse

Sidie-Slettehahl, Anna M.; Jensen, Kent C.; Johnson, Rex R.; Arnold, Todd W.; Austin, Jane; Stafford, Joshua D.

2015-01-01

Population status and habitat use of yellow rails (Coturnicops noveboracensis), Nelson's sparrows (Ammodramus nelsoni), and Le Conte's sparrows (A. leconteii) are poorly known, so standardized surveys of these species are needed to inform conservation planning and management. A protocol for monitoring secretive marsh birds exists; however, these species regularly call at night and may be missed during early morning surveys. We tested the effectiveness of autonomous recording units (hereafter, recording units) to survey these species by analyzing recorded vocalizations using bioacoustics software. We deployed 22 recording units at 54 sites in northern Minnesota and eastern North Dakota, USA, and conducted traditional broadcast surveys during May–June, 2010 and 2011. We compared detection probabilities between recording units and standard monitoring protocols using robust-design occupancy models. On average, recording units detected 0.59 (SE = 0.11) fewer Le Conte's sparrows, 0.76 (SE = 0.15) fewer Nelson's sparrows, and 1.01 (SE = 0.14) fewer yellow rails per survey than were detected using the standard protocol. Detection probabilities using the standard protocol averaged 0.95 (yellow rail; 95% CI = 0.86–0.98), 0.93 (Le Conte's sparrow; 95% CI = 0.78–0.98), and 0.89 (Nelson's sparrow; 95% CI = 0.56–0.98), but averaged 0.71 (yellow rail; 95% CI = 0.56–0.83), 0.61 (Le Conte's sparrow; 95% CI = 0.42–0.78), and 0.51 (Nelson's sparrow; 95% CI = 0.19–0.82) using recording units. Reduced detection by recording units was likely due to the ability of human listeners to identify birds calling at greater distances. Recording units may be effective for surveying nocturnal secretive marsh birds if investigators correct for differential detectability. Reduced detectability may be outweighed by the increased spatial and temporal coverage feasible with recording units.

The correlation between relatives on the supposition of genomic imprinting.

PubMed Central

Spencer, Hamish G

2002-01-01

Standard genetic analyses assume that reciprocal heterozygotes are, on average, phenotypically identical. If a locus is subject to genomic imprinting, however, this assumption does not hold. We incorporate imprinting into the standard quantitative-genetic model for two alleles at a single locus, deriving expressions for the additive and dominance components of genetic variance, as well as measures of resemblance among relatives. We show that, in contrast to the case with Mendelian expression, the additive and dominance deviations are correlated. In principle, this correlation allows imprinting to be detected solely on the basis of different measures of familial resemblances, but in practice, the standard error of the estimate is likely to be too large for a test to have much statistical power. The effects of genomic imprinting will need to be incorporated into quantitative-genetic models of many traits, for example, those concerned with mammalian birthweight. PMID:12019254

The correlation between relatives on the supposition of genomic imprinting.

PubMed

Spencer, Hamish G

2002-05-01

Standard genetic analyses assume that reciprocal heterozygotes are, on average, phenotypically identical. If a locus is subject to genomic imprinting, however, this assumption does not hold. We incorporate imprinting into the standard quantitative-genetic model for two alleles at a single locus, deriving expressions for the additive and dominance components of genetic variance, as well as measures of resemblance among relatives. We show that, in contrast to the case with Mendelian expression, the additive and dominance deviations are correlated. In principle, this correlation allows imprinting to be detected solely on the basis of different measures of familial resemblances, but in practice, the standard error of the estimate is likely to be too large for a test to have much statistical power. The effects of genomic imprinting will need to be incorporated into quantitative-genetic models of many traits, for example, those concerned with mammalian birthweight.

Quantification of HIV-1 DNA using real-time recombinase polymerase amplification.

PubMed

Crannell, Zachary Austin; Rohrman, Brittany; Richards-Kortum, Rebecca

2014-06-17

Although recombinase polymerase amplification (RPA) has many advantages for the detection of pathogenic nucleic acids in point-of-care applications, RPA has not yet been implemented to quantify sample concentration using a standard curve. Here, we describe a real-time RPA assay with an internal positive control and an algorithm that analyzes real-time fluorescence data to quantify HIV-1 DNA. We show that DNA concentration and the onset of detectable amplification are correlated by an exponential standard curve. In a set of experiments in which the standard curve and algorithm were used to analyze and quantify additional DNA samples, the algorithm predicted an average concentration within 1 order of magnitude of the correct concentration for all HIV-1 DNA concentrations tested. These results suggest that quantitative RPA (qRPA) may serve as a powerful tool for quantifying nucleic acids and may be adapted for use in single-sample point-of-care diagnostic systems.

Noninvasive Fetal ECG: the PhysioNet/Computing in Cardiology Challenge 2013.

PubMed

Silva, Ikaro; Behar, Joachim; Sameni, Reza; Zhu, Tingting; Oster, Julien; Clifford, Gari D; Moody, George B

2013-03-01

The PhysioNet/CinC 2013 Challenge aimed to stimulate rapid development and improvement of software for estimating fetal heart rate (FHR), fetal interbeat intervals (FRR), and fetal QT intervals (FQT), from multichannel recordings made using electrodes placed on the mother's abdomen. For the challenge, five data collections from a variety of sources were used to compile a large standardized database, which was divided into training, open test, and hidden test subsets. Gold-standard fetal QRS and QT interval annotations were developed using a novel crowd-sourcing framework. The challenge organizers used the hidden test subset to evaluate 91 open-source software entries submitted by 53 international teams of participants in three challenge events, estimating FHR, FRR, and FQT using the hidden test subset, which was not available for study by participants. Two additional events required only user-submitted QRS annotations to evaluate FHR and FRR estimation accuracy using the open test subset available to participants. The challenge yielded a total of 91 open-source software entries. The best of these achieved average estimation errors of 187bpm 2 for FHR, 20.9 ms for FRR, and 152.7 ms for FQT. The open data sets, scoring software, and open-source entries are available at PhysioNet for researchers interested on working on these problems.

Process capability determination of new and existing equipment

NASA Technical Reports Server (NTRS)

Mcclelland, H. T.; Su, Penwen

1994-01-01

The objective of this paper is to illustrate a method of determining the process capability of new or existing equipment. The method may also be modified to apply to testing laboratories. Long term changes in the system may be determined by periodically making new test parts or submitting samples from the original set to the testing laboratory. The technique described has been developed through a series of projects in special topics manufacturing courses and graduate student projects. It will be implemented as a standard experiment in an advanced manufacturing course in a new Manufacturing Engineering program at the University of Wisconsin-Stout campus. Before starting a project of this nature, it is important to decide on the exact question to be answered. In this case, it is desired to know what variation can be reasonably expected in the next part, feature, or test result produced. Generally, this question is answered by providing the process capability or the average value of a measured characteristic of the part or process plus or minus three standard deviations. There are two general cases to be considered: the part or test is made in large quantities with little change, or the process is flexible and makes a large variety of parts. Both cases can be accommodated; however, the emphasis in this report is on short run situations.

Comparison of the effects of storytelling and creative drama methods on children's awareness about personal hygiene

PubMed Central

Soleymani, Mohammad Reza; Hemmati, Soheila; Ashrafi-Rizi, Hassan; Shahrzadi, Leila

2017-01-01

BACKGROUND AND OBJECTIVE: Maintaining and improving the health situation of children requires them to become more aware about personal hygiene through proper education. Based on several studies, teachings provided through informal methods are fully understandable for children. Therefore, the goal of this study is to compare the effects of creative drama and storytelling education methods on increasing the awareness of children regarding personal hygiene. METHODS: This is an applied study conducted using semiempirical method in two groups. The study population consisted of 85 children participating in 4th center for Institute for the Intellectual Development of Children and Young Adults in Isfahan, 40 of which were randomly selected and placed in storytelling and creative drama groups with 20 members each. The data gathering tool was a questionnaire created by the researchers whose content validity was confirmed by health education experts. The gathered information were analyzed using both descriptive (average and standard deviation) and analytical (independent t-test and paired t-test) statistical methods. RESULTS: The findings showed that there was a meaningful difference between the awareness score of both groups before and after intervention. The average awareness score of storytelling group was increased from 50.69 to 86.83 while the average score of creative drama group was increased from 57.37 to 85.09. Furthermore, according to paired t-test results, there was no significant difference between average scores of storytelling and creative drama groups. CONCLUSIONS: The results of the current study showed that although both storytelling and creative drama methods are effective in increasing the awareness of children regarding personal hygiene, there is no significant difference between the two methods. PMID:29114550

Comparison of the effects of storytelling and creative drama methods on children's awareness about personal hygiene.

PubMed

Soleymani, Mohammad Reza; Hemmati, Soheila; Ashrafi-Rizi, Hassan; Shahrzadi, Leila

2017-01-01

Maintaining and improving the health situation of children requires them to become more aware about personal hygiene through proper education. Based on several studies, teachings provided through informal methods are fully understandable for children. Therefore, the goal of this study is to compare the effects of creative drama and storytelling education methods on increasing the awareness of children regarding personal hygiene. This is an applied study conducted using semiempirical method in two groups. The study population consisted of 85 children participating in 4 th center for Institute for the Intellectual Development of Children and Young Adults in Isfahan, 40 of which were randomly selected and placed in storytelling and creative drama groups with 20 members each. The data gathering tool was a questionnaire created by the researchers whose content validity was confirmed by health education experts. The gathered information were analyzed using both descriptive (average and standard deviation) and analytical (independent t -test and paired t -test) statistical methods. The findings showed that there was a meaningful difference between the awareness score of both groups before and after intervention. The average awareness score of storytelling group was increased from 50.69 to 86.83 while the average score of creative drama group was increased from 57.37 to 85.09. Furthermore, according to paired t -test results, there was no significant difference between average scores of storytelling and creative drama groups. The results of the current study showed that although both storytelling and creative drama methods are effective in increasing the awareness of children regarding personal hygiene, there is no significant difference between the two methods.

Excellent amino acid racemization results from Holocene sand dollars

NASA Astrophysics Data System (ADS)

Kosnik, M.; Kaufman, D. S.; Kowalewski, M.; Whitacre, K.

2015-12-01

Amino acid racemization (AAR) is widely used as a cost-effective method to date molluscs in time-averaging and taphonomic studies, but it has not been attempted for echinoderms despite their paleobiological importance. Here we demonstrate the feasibility of AAR geochronology in Holocene aged Peronella peronii (Echinodermata: Echinoidea) collected from Sydney Harbour (Australia). Using standard HPLC methods we determined the extent of AAR in 74 Peronella tests and performed replicate analyses on 18 tests. We sampled multiple areas of two individuals and identified the outer edge as a good sampling location. Multiple replicate analyses from the outer edge of 18 tests spanning the observed range of D/Ls yielded median coefficients of variation < 4% for Asp, Phe, Ala, and Glu D/L values, which overlaps with the analytical precision. Correlations between D/L values across 155 HPLC injections sampled from 74 individuals are also very high (pearson r2 > 0.95) for these four amino acids. The ages of 11 individuals spanning the observed range of D/L values were determined using 14C analyses, and Bayesian model averaging was used to determine the best AAR age model. The averaged age model was mainly composed of time-dependent reaction kinetics models (TDK, 71%) based on phenylalanine (Phe, 94%). Modelled ages ranged from 14 to 5539 yrs, and the median 95% confidence interval for the 74 analysed individuals is ±28% of the modelled age. In comparison, the median 95% confidence interval for the 11 calibrated 14C ages was ±9% of the median age estimate. Overall Peronella yields exceptionally high-quality AAR D/L values and appears to be an excellent substrate for AAR geochronology. This work opens the way for time-averaging and taphonomic studies of echinoderms similar to those in molluscs.

Use of the azimuthal resistivity technique for determination of regional azimuth of transmissivity

USGS Publications Warehouse

Carlson, D.

2010-01-01

Many bedrock units contain joint sets that commonly act as preferred paths for the movement of water, electrical charge, and possible contaminants associated with production or transit of crude oil or refined products. To facilitate the development of remediation programs, a need exists to reliably determine regional-scale properties of these joint sets: azimuth of transmissivity ellipse, dominant set, and trend(s). The surface azimuthal electrical resistivity survey method used for local in situ studies can be a noninvasive, reliable, efficient, and relatively cost-effective method for regional studies. The azimuthal resistivity survey method combines the use of standard resistivity equipment with a Wenner array rotated about a fixed center point, at selected degree intervals, which yields an apparent resistivity ellipse from which joint-set orientation can be determined. Regional application of the azimuthal survey method was tested at 17 sites in an approximately 500 km2 (193 mi2) area around Milwaukee, Wisconsin, with less than 15m (50 ft) overburden above the dolomite. Results of 26 azimuthal surveys were compared and determined to be consistent with the results of two other methods: direct observation of joint-set orientation and transmissivity ellipses from multiple-well-aquifer tests. The average of joint-set trend determined by azimuthal surveys is within 2.5?? of the average of joint-set trend determined by direct observation of major joint sets at 24 sites. The average of maximum of transmissivity trend determined by azimuthal surveys is within 5.7?? of the average of maximum of transmissivity trend determined for 14 multiple-well-aquifer tests. Copyright ?? 2010 The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Reduction of animal suffering in rabies vaccine potency testing by introduction of humane endpoints.

PubMed

Takayama-Ito, Mutsuyo; Lim, Chang-Kweng; Nakamichi, Kazuo; Kakiuchi, Satsuki; Horiya, Madoka; Posadas-Herrera, Guillermo; Kurane, Ichiro; Saijo, Masayuki

2017-03-01

Potency controls of inactivated rabies vaccines for human use are confirmed by the National Institutes of Health challenge test in which lethal infection with severe neurological symptoms should be observed in approximately half of the mice inoculated with the rabies virus. Weight loss, decreased body temperature, and the presence of rabies-associated neurological signs have been proposed as humane endpoints. The potential for reduction of animal suffering by introducing humane endpoints in the potency test for inactivated rabies vaccine for human use was investigated. The clinical signs were scored and body weight was monitored. The average times to death following inoculation were 10.49 and 10.99 days post-inoculation (dpi) by the potency and challenge control tests, respectively, whereas the average times to showing Score-2 signs (paralysis, trembling, and coma) were 6.26 and 6.55 dpi, respectively. Body weight loss of more than 15% appeared at 5.82 and 6.42 dpi. The data provided here support the introduction of obvious neuronal signs combined with a body weight loss of ≥15% as a humane endpoint to reduce the time of animal suffering by approximately 4 days. Copyright © 2017 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

CPAP Adherence is Associated With Attentional Improvements in a Group of Primarily Male Patients With Moderate to Severe OSA.

PubMed

Deering, Sean; Liu, Lin; Zamora, Tania; Hamilton, Joanne; Stepnowsky, Carl

2017-12-15

Obstructive sleep apnea (OSA) is a widespread condition that adversely affects physical health and cognitive functioning. The prevailing treatment for OSA is continuous positive airway pressure (CPAP), but therapeutic benefits are dependent on consistent use. Our goal was to investigate the relationship between CPAP adherence and measures of sustained attention in patients with OSA. Our hypothesis was that the Psychomotor Vigilance Task (PVT) would be sensitive to attention-related improvements resulting from CPAP use. This study was a secondary analysis of a larger clinical trial. Treatment adherence was determined from CPAP use data. Validated sleep-related questionnaires and a sustained-attention and alertness test (PVT) were administered to participants at baseline and at the 6-month time point. Over a 6-month time period, the average CPAP adherence was 3.32 h/night (standard deviation [SD] = 2.53), average improvement in PVT minor lapses was -4.77 (SD = 13.2), and average improvement in PVT reaction time was -73.1 milliseconds (standard deviation = 211). Multiple linear regression analysis showed that higher CPAP adherence was significantly associated with a greater reduction in minor lapses in attention after 6 months of continuous treatment with CPAP therapy (β = -0.72, standard error = 0.34, P = .037). The results of this study showed that higher levels of CPAP adherence were associated with significant improvements in vigilance. Because the PVT is a performance-based measure that is not influenced by prior learning and is not subjective, it may be an important supplement to patient self-reported assessments. Name: Effect of Self-Management on Improving Sleep Apnea Outcomes, URL: https://clinicaltrials.gov/ct2/show/NCT00310310, Identifier: NCT00310310. © 2017 American Academy of Sleep Medicine

Microbial distribution in the Environmental Control and Life Support System water recovery test conducted at NASA, MSFC

NASA Technical Reports Server (NTRS)

Gauthier, J. J.; Roman, M. C.; Kilgore, B. A.; Huff, T. L.; Obenhuber, D. C.; Terrell, D. W.; Wilson, M. E.; Jackson, N. E.

1991-01-01

NASA/MSFC is developing a physical/chemical treatment system to reclaim wastewater for reuse on Space Station Freedom (SSF). Integrated testing of hygiene and potable water subsystems assessed the capability to reclaim water to SSF specifications. The test was conducted from May through July 1990 with a total of 47 days of system test operation. Water samples were analyzed using standard cultural methods employing membrane filtration and spread plate techniques and epifluorescence microscopy. Fatty acid methyl ester and biochemical profiles were used for microbial identification. Analysis of waste and product water produced by the subsystems demonstrated the effective reduction of viable microbial populations greater than 8.0E + 06 colony forming units (CFU) per 100 mL to an average of 5 CFU/100 mL prior to distribution into storage tanks.

Intraindividual neuropsychological test variability in healthy individuals with high average intelligence and educational attainment.

PubMed

Heyanka, Daniel J; Holster, Jessica L; Golden, Charles J

2013-08-01

Knowledge of patterns of neuropsychological performance among normal, healthy individuals is integral to the practice of clinical neuropsychology, because clinicians may not always account for intraindividual variability (IIV) before coming to diagnostic conclusions. The IIV was assessed among a sample of 46 healthy individuals with high average intelligence and educational attainment, utilizing a battery of neuropsychological tests, including the Wechsler Adult Intelligence Scale, Fourth Edition (WAIS-IV) and Wechsler Memory Scale, Fourth Edition (WMS-IV). The data indicated substantial variability in neurocognitive abilities. All participants were found to demonstrate scores considered impaired by at least 2 standard deviations (SDs). Despite adjusting for outliers, no participant produced a "normal" testing profile with an intraindividual maximum discrepancy (MD) of less than 1 SD in either direction. When WAIS-IV Full Scale IQ (FSIQ) was considered, participants generally demonstrated cognitive test scores ranging from 2 SDs less than to 1.5 SDs greater than their FSIQ. Furthermore, after demographic corrections, the majority (59%) of participants demonstrated at least 1 impaired cognitive test score, as defined by being 1 to 1.5 SDs below the mean. Overall, results substantiate the need for clinicians to consider FSIQ and educational attainment in interpretation of neuropsychological testing results, given the relevant commonality of "abnormal" test scores within this population. This may ultimately reduce the likelihood of making false-positive conclusions of impairment when educational attainment and intelligence are high, thus improving diagnostic accuracy.

40 CFR 86.1702-99 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to a point of first sale in the All States Trading Region. Axle ratio means the number of times the... is below the applicable fleet average NMOG standard, times the applicable production for a given... average NMOG standard, times the applicable production for a given model year. NMOG debits have units of g...

40 CFR 86.1702-99 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to a point of first sale in the All States Trading Region. Axle ratio means the number of times the... is below the applicable fleet average NMOG standard, times the applicable production for a given... average NMOG standard, times the applicable production for a given model year. NMOG debits have units of g...

49 CFR 525.7 - Basis for petition.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.7 Basis for... comply with that average fuel economy standard; and (4) Anticipated consumer demand in the United States... these lubricants, explain the reasons for not so doing. (f) For each affected model year, a fuel economy...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Exhaust emission and fuel economy tests (1975 Federal Test Procedure) were performed on a 1972 Plymouth Cricket equipped with a turbocharged four-cylinder stratified charge engine (Texaco Controlled Combustion System) and an exhaust catalyst. The tests were conducted for three different fuels; unleaded gasoline, number 2 diesel fuel, and a wide boiling range distillate fuel supplied by Texaco. Average hydrocarbon, carbon monoxide, and nitrogen oxide emissions (without throttling) obtained with diesel fuel were 0.89, 1.88, and 1.91 g/mi, respectively. Hydrocarbon, carbon monoxide and nitrogen oxide levels of 0.88, 0.97, and 1.61 g/mi, respectively, were obtained with the wide boiling range fuel;more » and emission levels of 1.37, 0.50, and 1.84 g/mi, respectively, were obtained with the unleaded gasoline. Average fuel economies for the diesel fuel, wide boiling range fuel, and unleaded gasoline were 30.8, 29.7, and 28.4 mi/gal., respectively. Thus, the turbocharged catalyst equipped stratified charge engine demonstrated the ability to meet 1975 interim levels on three different fuels with high fuel economy. Compliance with the 1977 hydrocarbon standard of 0.41 g/mi will require additional control devices or basic combustion improvement.« less

Comparison of Clinical Efficacy of Lateral and Lateral and Medial Double-plating Fixation of Distal Femoral Fractures.

PubMed

Bai, Zhibiao; Gao, Shichang; Hu, Zhenming; Liang, Anlin

2018-03-20

The present study was performed to compare the clinical efficacy of lateral plate and lateral and medial double-plating fixation of distal femoral fractures and explore the indication of lateral and medial double-plating fixation of the distal femoral fractures. From March 2006 to April 2014, 48 and 12 cases of distal femoral fractures were treated with lateral plate (single plate) and lateral and medial plates (double plates), respectively. During the surgery, after setting the lateral plate for the distal femoral fractures, if the varus stress test of the knee was positive and the lateral collateral ligament rupture was excluded, lateral and medial double-plating fixation was used for the stability of the fragments. All the patients were followed up at an average period of 15.9 months. The average operation time, the intraoperative hemorrhage and the fracture union time of the two groups were compared. One year after operation, knee function was evaluated by the Kolmert's standard. There was no significant difference in the average operation time, intraoperative hemorrhage, fracture healing time and excellent and good rates of postoperative knee function between two groups. Positive Varus stress test during operation can be an indication for lateral and medial double-plating fixation of distal femoral fractures.

Modelling personality, plasticity and predictability in shelter dogs

PubMed Central

2017-01-01

Behavioural assessments of shelter dogs (Canis lupus familiaris) typically comprise standardized test batteries conducted at one time point, but test batteries have shown inconsistent predictive validity. Longitudinal behavioural assessments offer an alternative. We modelled longitudinal observational data on shelter dog behaviour using the framework of behavioural reaction norms, partitioning variance into personality (i.e. inter-individual differences in behaviour), plasticity (i.e. inter-individual differences in average behaviour) and predictability (i.e. individual differences in residual intra-individual variation). We analysed data on interactions of 3263 dogs (n = 19 281) with unfamiliar people during their first month after arrival at the shelter. Accounting for personality, plasticity (linear and quadratic trends) and predictability improved the predictive accuracy of the analyses compared to models quantifying personality and/or plasticity only. While dogs were, on average, highly sociable with unfamiliar people and sociability increased over days since arrival, group averages were unrepresentative of all dogs and predictions made at the individual level entailed considerable uncertainty. Effects of demographic variables (e.g. age) on personality, plasticity and predictability were observed. Behavioural repeatability was higher one week after arrival compared to arrival day. Our results highlight the value of longitudinal assessments on shelter dogs and identify measures that could improve the predictive validity of behavioural assessments in shelters. PMID:28989764

Efficient determination of average valence of manganese in manganese oxides by reaction headspace gas chromatography.

PubMed

Xie, Wei-Qi; Gong, Yi-Xian; Yu, Kong-Xian

2017-08-18

This work investigates a new reaction headspace gas chromatographic (HS-GC) technique for efficient quantifying average valence of manganese (Mn) in manganese oxides. This method is on the basis of the oxidation reaction between manganese oxides and sodium oxalate under the acidic condition. The carbon dioxide (CO 2 ) formed from the oxidation reaction can be quantitatively analyzed by headspace gas chromatography. The data showed that the reaction in the closed headspace vial can be completed in 20min at 80°C. The relative standard deviation of this reaction HS-GC method in the precision testing was within 1.08%, the relative differences between the new method and the reference method (titration method) were no more than 5.71%. The new HS-GC method is automated, efficient, and can be a reliable tool for the quantitative analysis of average valence of manganese in the manganese oxide related research and applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Novel algorithm for a smartphone-based 6-minute walk test application: algorithm, application development, and evaluation.

PubMed

Capela, Nicole A; Lemaire, Edward D; Baddour, Natalie

2015-02-20

The 6-minute walk test (6MWT: the maximum distance walked in 6 minutes) is used by rehabilitation professionals as a measure of exercise capacity. Today's smartphones contain hardware that can be used for wearable sensor applications and mobile data analysis. A smartphone application can run the 6MWT and provide typically unavailable biomechanical information about how the person moves during the test. A new algorithm for a calibration-free 6MWT smartphone application was developed that uses the test's inherent conditions and smartphone accelerometer-gyroscope data to report the total distance walked, step timing, gait symmetry, and walking changes over time. This information is not available with a standard 6MWT and could help with clinical decision-making. The 6MWT application was evaluated with 15 able-bodied participants. A BlackBerry Z10 smartphone was worn on a belt at the mid lower back. Audio from the phone instructed the person to start and stop walking. Digital video was independently recorded during the trial as a gold-standard comparator. The average difference between smartphone and gold standard foot strike timing was 0.014 ± 0.015 s. The total distance calculated by the application was within 1 m of the measured distance for all but one participant, which was more accurate than other smartphone-based studies. These results demonstrated that clinically relevant 6MWT results can be achieved with typical smartphone hardware and a novel algorithm.

Safety and Feasibility of the 6-Minute Walk Test in Patients with Acute Stroke.

PubMed

Kubo, Hiroki; Nozoe, Masafumi; Yamamoto, Miho; Kamo, Arisa; Noguchi, Madoka; Kanai, Masashi; Mase, Kyoshi; Shimada, Shinichi

2018-06-01

Our objective was to investigate the safety and feasibility of the 6-minute walk test in patients with acute stroke. Consecutive patients with acute stroke, admitted to the Itami Kosei Neurosurgical Hospital from September 2016 to April 2017 were enrolled. Walking capacity was assessed by a physical therapist using the 6-minute walk test in 94 patients with acute stroke within 14 days of hospital admission. The primary outcomes were safety (i.e., the prevalence of new adverse events during and after the test) and feasibility (i.e., test completion rate) of the 6-minute walk test. The 6-minute walk test was performed for a mean duration of 5.1 days (standard deviation, 2.6 days) after hospital admission. Seventy patients (74.5%) could walk without standby assistance or a walking aid, and 24 patients (25.5%) could walk without standby assistance but with a walking aid. The average distance walked by patients during the 6-minute walk test was 331 m (standard deviation, 107.2 m). Adverse events following the 6-minute walk test occurred in 6 patients (6.4%) and included stroke progression, stroke recurrence, seizures, and neurological deterioration. Heart rate increase (>120 beats/min) occurred in 3 patients (3.2%) during the test. Lastly, 6 patients (6.4%) were unable to complete the 6-minute walk test. Although performance in the 6-minute walk test was decreased in patients with acute stroke, the test itself appears to be safe and feasible in this patient population. Copyright © 2018 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Accelerated magnetic resonance diffusion tensor imaging of the median nerve using simultaneous multi-slice echo planar imaging with blipped CAIPIRINHA.

PubMed

Filli, Lukas; Piccirelli, Marco; Kenkel, David; Boss, Andreas; Manoliu, Andrei; Andreisek, Gustav; Bhat, Himanshu; Runge, Val M; Guggenberger, Roman

2016-06-01

To investigate the feasibility of MR diffusion tensor imaging (DTI) of the median nerve using simultaneous multi-slice echo planar imaging (EPI) with blipped CAIPIRINHA. After federal ethics board approval, MR imaging of the median nerves of eight healthy volunteers (mean age, 29.4 years; range, 25-32) was performed at 3 T using a 16-channel hand/wrist coil. An EPI sequence (b-value, 1,000 s/mm(2); 20 gradient directions) was acquired without acceleration as well as with twofold and threefold slice acceleration. Fractional anisotropy (FA), mean diffusivity (MD) and quality of nerve tractography (number of tracks, average track length, track homogeneity, anatomical accuracy) were compared between the acquisitions using multivariate ANOVA and the Kruskal-Wallis test. Acquisition time was 6:08 min for standard DTI, 3:38 min for twofold and 2:31 min for threefold acceleration. No differences were found regarding FA (standard DTI: 0.620 ± 0.058; twofold acceleration: 0.642 ± 0.058; threefold acceleration: 0.644 ± 0.061; p ≥ 0.217) and MD (standard DTI: 1.076 ± 0.080 mm(2)/s; twofold acceleration: 1.016 ± 0.123 mm(2)/s; threefold acceleration: 0.979 ± 0.153 mm(2)/s; p ≥ 0.074). Twofold acceleration yielded similar tractography quality compared to standard DTI (p > 0.05). With threefold acceleration, however, average track length and track homogeneity decreased (p = 0.004-0.021). Accelerated DTI of the median nerve is feasible. Twofold acceleration yields similar results to standard DTI. • Standard DTI of the median nerve is limited by its long acquisition time. • Simultaneous multi-slice acquisition is a new technique for accelerated DTI. • Accelerated DTI of the median nerve yields similar results to standard DTI.

Repeatability of Cryogenic Multilayer Insulation

NASA Technical Reports Server (NTRS)

Johnson, W. L.; Vanderlaan, M.; Wood, J. J.; Rhys, N. O.; Guo, W.; Van Sciver, S.; Chato, D. J.

2017-01-01

Due to the variety of requirements across aerospace platforms, and one off projects, the repeatability of cryogenic multilayer insulation has never been fully established. The objective of this test program is to provide a more basic understanding of the thermal performance repeatability of MLI systems that are applicable to large scale tanks. There are several different types of repeatability that can be accounted for: these include repeatability between multiple identical blankets, repeatability of installation of the same blanket, and repeatability of a test apparatus. The focus of the work in this report is on the first two types of repeatability. Statistically, repeatability can mean many different things. In simplest form, it refers to the range of performance that a population exhibits and the average of the population. However, as more and more identical components are made (i.e. the population of concern grows), the simple range morphs into a standard deviation from an average performance. Initial repeatability testing on MLI blankets has been completed at Florida State University. Repeatability of five GRC provided coupons with 25 layers was shown to be +/- 8.4 whereas repeatability of repeatedly installing a single coupon was shown to be +/- 8.0. A second group of 10 coupons have been fabricated by Yetispace and tested by Florida State University, through the first 4 tests, the repeatability has been shown to be +/- 16. Based on detailed statistical analysis, the data has been shown to be statistically significant.

Repeatability of Cryogenic Multilayer Insulation

NASA Technical Reports Server (NTRS)

Johnson, W. L.; Vanderlaan, M.; Wood, J. J.; Rhys, N. O.; Guo, W.; Van Sciver, S.; Chato, D. J.

2017-01-01

Due to the variety of requirements across aerospace platforms, and one off projects, the repeatability of cryogenic multilayer insulation has never been fully established. The objective of this test program is to provide a more basic understanding of the thermal performance repeatability of MLI systems that are applicable to large scale tanks. There are several different types of repeatability that can be accounted for: these include repeatability between multiple identical blankets, repeatability of installation of the same blanket, and repeatability of a test apparatus. The focus of the work in this report is on the first two types of repeatability. Statistically, repeatability can mean many different things. In simplest form, it refers to the range of performance that a population exhibits and the average of the population. However, as more and more identical components are made (i.e. the population of concern grows), the simple range morphs into a standard deviation from an average performance. Initial repeatability testing on MLI blankets has been completed at Florida State University. Repeatability of five GRC provided coupons with 25 layers was shown to be +/- 8.4% whereas repeatability of repeatedly installing a single coupon was shown to be +/- 8.0%. A second group of 10 coupons have been fabricated by Yetispace and tested by Florida State University, through the first 4 tests, the repeatability has been shown to be +/- 15-25%. Based on detailed statistical analysis, the data has been shown to be statistically significant.

True random bit generators based on current time series of contact glow discharge electrolysis

NASA Astrophysics Data System (ADS)

Rojas, Andrea Espinel; Allagui, Anis; Elwakil, Ahmed S.; Alawadhi, Hussain

2018-05-01

Random bit generators (RBGs) in today's digital information and communication systems employ a high rate physical entropy sources such as electronic, photonic, or thermal time series signals. However, the proper functioning of such physical systems is bound by specific constrains that make them in some cases weak and susceptible to external attacks. In this study, we show that the electrical current time series of contact glow discharge electrolysis, which is a dc voltage-powered micro-plasma in liquids, can be used for generating random bit sequences in a wide range of high dc voltages. The current signal is quantized into a binary stream by first using a simple moving average function which makes the distribution centered around zero, and then applying logical operations which enables the binarized data to pass all tests in industry-standard randomness test suite by the National Institute of Standard Technology. Furthermore, the robustness of this RBG against power supply attacks has been examined and verified.

Development of SYBR Green and TaqMan quantitative real-time PCR assays for hepatopancreatic parvovirus (HPV) infecting Penaeus monodon in India.

PubMed

Yadav, Reena; Paria, Anutosh; Mankame, Smruti; Makesh, M; Chaudhari, Aparna; Rajendran, K V

2015-12-01

Hepatopancreatic parvovirus (HPV) infects Penaeus monodon and causes mortality in the larval stages. Further, it has been implicated in the growth retardation in cultured P. monodon. Though different geographical isolates of HPV show large sequence variations, a sensitive PCR assay specific to Indian isolate has not yet been reported. Here, we developed a sensitive SYBR Green-based and TaqMan real-time PCR for the detection and quantification of the virus. A 441-bp PCR amplicon was cloned in pTZ57 R/T vector and the plasmid copy number was estimated. A 10-fold serial dilution of the plasmid DNA from 1 × 10(9) copies to 1 copy was prepared and used as the standard. The primers were tested initially using the standard on a conventional PCR format to determine the linearity of detection. The standards were further tested on real-time PCR format using SYBR Green and TaqMan chemistry and standard curves were generated based on the Ct values from three well replicates for each dilution. The assays were found to be sensitive, specific and reproducible with a wide dynamic range (1 × 10(9) to 10 copies) with coefficient of regression (R(2)) > 0.99, calculated average slope -3.196 for SYBR Green assay whereas, for TaqMan assay it was >0.99 and -3.367, respectively. The intra- and inter-assay variance of the Ct values ranged from 0.26% to 0.94% and 0.12% to 0.81%, respectively, for SYBR Green assay, and the inter-assay variance of the Ct values for TaqMan assay ranged from 0.07% to 1.93%. The specificity of the assays was proved by testing other DNA viruses of shrimp such as WSSV, IHHNV and MBV. Standardized assays were further tested to detect and quantify HPV in the post-larvae of P. monodon. The result was further compared with conventional PCR to test the reproducibility of the test. The assay was also used to screen Litopeneaus vannamei, Macrobrachium rosenbergii and Scylla serrata for HPV. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Assessment of capacity for logisty, public education, and training in public health emergency management in China].

PubMed

Hu, Guo-qing; Rao, Ke-qin; Sun, Zhen-qiu; Yu, Ren-he

2008-10-01

To assess the capacity for logistics, public education, and training in managing public health emergency in China at present. Four provinces were selected using stratified sampling. All the municipalities of these 4 provinces were assessed using the 9th and 10th subscales (logistics, public education and training) of Preparedness and response capacity questionnaire for public health emergencies for provincial or municipal governments developed by the Center for Health Statistics and Information, Ministry of Health of China. Sixty of the 66 questionnaires (90.91%) were collected. Among the 60 investigated municipalities, 80% established a specific agency to take charge of emergency material storage, management and allocation, 65% developed standard for material storage, 35% developed standard of places for material storage, 25% built regulation for testing, maintaining, and updating the emergency materials regularly, 45% arranged budget for routine payment, 27% established standard of emergency fund, and 28% set up the procedure to initiate emergency fund. The average of standard score of subscale 9 was 43.33 (95% confidence interval, 35.65~51.01). 25% of the 60 municipalities conducted assessment for training in the past 2 years, 53% developed plan for emergency personnel training, 20% developed effectiveness assessment regulation of emergency personnel training, 80% assigned a specific agency to be responsible for public education, and 23% established regulation for public education. The average of standard score of subscale 10 was 47.43 (95% confidence interval, 40.69~54.17). Serious problems are found in logistics, public education, and training for public health emergency management in China. Measures should be taken immediately by the central and local government to improve these capacities.

Rocker shoe, minimalist shoe, and standard running shoe: a comparison of running economy.

PubMed

Sobhani, Sobhan; Bredeweg, Steef; Dekker, Rienk; Kluitenberg, Bas; van den Heuvel, Edwin; Hijmans, Juha; Postema, Klaas

2014-05-01

Running with rocker shoes is believed to prevent lower limb injuries. However, it is not clear how running in these shoes affects the energy expenditure. The purpose of this study was, therefore, to assess the effects of rocker shoes on running economy in comparison with standard and minimalist running shoes. Cross-over design. Eighteen endurance female runners (age=23.6 ± 3 years), who were inexperienced in running with rocker shoes and with minimalist/barefoot running, participated in this study. Oxygen consumption, carbon dioxide production, heart rate and rate of perceived exertion were measured while participants completed a 6-min sub-maximal treadmill running test for each footwear condition. The data of the last 2 min of each shoe condition were averaged for analysis. A linear mixed model was used to compare differences among three footwear conditions. Oxygen consumption during running with rocker shoes was on average 4.5% higher than with the standard shoes (p<0.001) and 5.6% higher than with the minimalist shoe (p<0.001). No significant differences were found in heart rate and rate of perceived exertion across three shoe conditions. Female runners, who are not experienced in running with the rocker shoes and minimalist shoes, show more energy expenditure during running with the rocker shoes compared with the standard and minimalist shoes. As the studied shoes were of different masses, part of the effect of increased energy expenditure with the rocker shoe is likely to be due to its larger mass as compared with standard running shoes and minimalist shoes. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Icing Analysis of a Swept NACA 0012 Wing Using LEWICE3D Version 3.48

NASA Technical Reports Server (NTRS)

Bidwell, Colin S.

2014-01-01

Icing calculations were performed for a NACA 0012 swept wing tip using LEWICE3D Version 3.48 coupled with the ANSYS CFX flow solver. The calculated ice shapes were compared to experimental data generated in the NASA Glenn Icing Research Tunnel (IRT). The IRT tests were designed to test the performance of the LEWICE3D ice void density model which was developed to improve the prediction of swept wing ice shapes. Icing tests were performed for a range of temperatures at two different droplet inertia parameters and two different sweep angles. The predicted mass agreed well with the experiment with an average difference of 12%. The LEWICE3D ice void density model under-predicted void density by an average of 30% for the large inertia parameter cases and by 63% for the small inertia parameter cases. This under-prediction in void density resulted in an over-prediction of ice area by an average of 115%. The LEWICE3D ice void density model produced a larger average area difference with experiment than the standard LEWICE density model, which doesn't account for the voids in the swept wing ice shape, (115% and 75% respectively) but it produced ice shapes which were deemed more appropriate because they were conservative (larger than experiment). Major contributors to the overly conservative ice shape predictions were deficiencies in the leading edge heat transfer and the sensitivity of the void ice density model to the particle inertia parameter. The scallop features present on the ice shapes were thought to generate interstitial flow and horse shoe vortices which enhance the leading edge heat transfer. A set of changes to improve the leading edge heat transfer and the void density model were tested. The changes improved the ice shape predictions considerably. More work needs to be done to evaluate the performance of these modifications for a wider range of geometries and icing conditions.

Icing Analysis of a Swept NACA 0012 Wing Using LEWICE3D Version 3.48

NASA Technical Reports Server (NTRS)

Bidwell, Colin S.

2014-01-01

Icing calculations were performed for a NACA 0012 swept wing tip using LEWICE3D Version 3.48 coupled with the ANSYS CFX flow solver. The calculated ice shapes were compared to experimental data generated in the NASA Glenn Icing Research Tunnel (IRT). The IRT tests were designed to test the performance of the LEWICE3D ice void density model which was developed to improve the prediction of swept wing ice shapes. Icing tests were performed for a range of temperatures at two different droplet inertia parameters and two different sweep angles. The predicted mass agreed well with the experiment with an average difference of 12%. The LEWICE3D ice void density model under-predicted void density by an average of 30% for the large inertia parameter cases and by 63% for the small inertia parameter cases. This under-prediction in void density resulted in an over-prediction of ice area by an average of 115%. The LEWICE3D ice void density model produced a larger average area difference with experiment than the standard LEWICE density model, which doesn't account for the voids in the swept wing ice shape, (115% and 75% respectively) but it produced ice shapes which were deemed more appropriate because they were conservative (larger than experiment). Major contributors to the overly conservative ice shape predictions were deficiencies in the leading edge heat transfer and the sensitivity of the void ice density model to the particle inertia parameter. The scallop features present on the ice shapes were thought to generate interstitial flow and horse shoe vortices which enhance the leading edge heat transfer. A set of changes to improve the leading edge heat transfer and the void density model were tested. The changes improved the ice shape predictions considerably. More work needs to be done to evaluate the performance of these modifications for a wider range of geometries and icing conditions

Fully automated motion correction in first-pass myocardial perfusion MR image sequences.

PubMed

Milles, Julien; van der Geest, Rob J; Jerosch-Herold, Michael; Reiber, Johan H C; Lelieveldt, Boudewijn P F

2008-11-01

This paper presents a novel method for registration of cardiac perfusion magnetic resonance imaging (MRI). The presented method is capable of automatically registering perfusion data, using independent component analysis (ICA) to extract physiologically relevant features together with their time-intensity behavior. A time-varying reference image mimicking intensity changes in the data of interest is computed based on the results of that ICA. This reference image is used in a two-pass registration framework. Qualitative and quantitative validation of the method is carried out using 46 clinical quality, short-axis, perfusion MR datasets comprising 100 images each. Despite varying image quality and motion patterns in the evaluation set, validation of the method showed a reduction of the average right ventricle (LV) motion from 1.26+/-0.87 to 0.64+/-0.46 pixels. Time-intensity curves are also improved after registration with an average error reduced from 2.65+/-7.89% to 0.87+/-3.88% between registered data and manual gold standard. Comparison of clinically relevant parameters computed using registered data and the manual gold standard show a good agreement. Additional tests with a simulated free-breathing protocol showed robustness against considerable deviations from a standard breathing protocol. We conclude that this fully automatic ICA-based method shows an accuracy, a robustness and a computation speed adequate for use in a clinical environment.

Australian and New Zealand Fish Oil Products in 2016 Meet Label Omega-3 Claims and Are Not Oxidized.

PubMed

Nichols, Peter D; Dogan, Lalen; Sinclair, Andrew

2016-11-05

We provide new fish oil product results to assist industry in Australia and New Zealand and, ultimately, consumers in understanding the high product quality assurance protocols in place, together with the high product quality that has been determined by both industry and independent laboratories. Fish oil capsule products common to Australia and New Zealand were purchased in May 2016 in Richmond, Victoria, Australia. Products were from two groups; five standard fish oil products and five fish oil concentrates. Noting Therapeutic Goods Administration (TGA) requirement for use of standard methods, for all analyses undertaken a laboratory was selected that met the TGA criteria, including with accreditation. Total n -3 content exceeded the label-claimed content for all 10 products, with supplements containing on average 124% of the claimed content (range 115%-136%); eicosapentaenoic acid and docosahexaenoic acid (EPA + DHA) content averaged 109% of the label claim (range 99%-119%). All 10 products (100%) similarly met the international recommended peroxide value (PV) level. Anisidine value (pAV) met the international recommended level for eight of the 10 products, with two products known to contain flavorings that interfere with the pAV test. When accredited laboratories and standard protocols are used, Australian and New Zealand fish oil products have been shown to clearly meet their label claims for EPA + DHA content, and are not oxidized.

Australian and New Zealand Fish Oil Products in 2016 Meet Label Omega-3 Claims and Are Not Oxidized

PubMed Central

Nichols, Peter D.; Dogan, Lalen; Sinclair, Andrew

2016-01-01

We provide new fish oil product results to assist industry in Australia and New Zealand and, ultimately, consumers in understanding the high product quality assurance protocols in place, together with the high product quality that has been determined by both industry and independent laboratories. Fish oil capsule products common to Australia and New Zealand were purchased in May 2016 in Richmond, Victoria, Australia. Products were from two groups; five standard fish oil products and five fish oil concentrates. Noting Therapeutic Goods Administration (TGA) requirement for use of standard methods, for all analyses undertaken a laboratory was selected that met the TGA criteria, including with accreditation. Total n-3 content exceeded the label-claimed content for all 10 products, with supplements containing on average 124% of the claimed content (range 115%–136%); eicosapentaenoic acid and docosahexaenoic acid (EPA + DHA) content averaged 109% of the label claim (range 99%–119%). All 10 products (100%) similarly met the international recommended peroxide value (PV) level. Anisidine value (pAV) met the international recommended level for eight of the 10 products, with two products known to contain flavorings that interfere with the pAV test. When accredited laboratories and standard protocols are used, Australian and New Zealand fish oil products have been shown to clearly meet their label claims for EPA + DHA content, and are not oxidized. PMID:27827947

3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial.

PubMed

Cobetto, Nikita; Aubin, Carl-Éric; Parent, Stefan; Barchi, Soraya; Turgeon, Isabelle; Labelle, Hubert

2017-01-01

Recent studies showed that finite element model (FEM) combined to CAD/CAM improves the design of braces for the conservative treatment of adolescent idiopathic scoliosis (AIS), using 2D measurements from in-brace radiographs. We aim to assess the immediate effectiveness on curve correction in all three planes of braces designed using CAD/CAM and numerical simulation compared to braces designed with CAD/CAM only. SRS standardized criteria for bracing were followed to recruit 48 AIS patients who were randomized into two groups. For both groups, 3D reconstructions of the spine and patient's torso, respectively built from bi-planar radiographs and surface topography, were obtained and braces were designed using the CAD/CAM approach. For the test group, 3D reconstructions of the spine and patient's torso were additionally used to generate a personalized FEM to simulate and iteratively improve the brace design with the objective of curve correction maximization in three planes and brace material minimization. For the control group (CtrlBraces), average Cobb angle prior to bracing was 29° (thoracic, T) and 25° (lumbar, L) with the planes of maximal curvature (PMC) respectively oriented at 63° and 57° on average with respect to the sagittal plane. Average apical axial rotation prior to bracing was 7° (T) and 9° (L). For the test group (FEMBraces), initial Cobb angles were 33° (T) and 28° (L) with the PMC at 68° (T) and 56° (L) and average apical axial rotation prior to bracing at 9° (T and L). On average, FEMBraces were 50% thinner and had 20% less covering surface than CtrlBraces while reducing T and L curves by 47 and 48%, respectively, compared to 25 and 26% for CtrlBraces. FEMBraces corrected apical axial rotation by 46% compared to 30% for CtrlBraces. The combination of numerical simulation and CAD/CAM approach allowed designing more efficient braces in all three planes, with the advantages of being lighter than standard CAD/CAM braces. Bracing in AIS may be improved in 3D by the use of this simulation platform. This study is ongoing to recruit more cases and to analyze the long-term effect of bracing. ClinicalTrials.gov, NCT02285621.