Listeria monocytogenes CadC Regulates Cadmium Efflux and Fine-tunes Lipoprotein Localization to Escape the Host Immune Response and Promote Infection.

PubMed

Pombinho, Rita; Camejo, Ana; Vieira, Ana; Reis, Olga; Carvalho, Filipe; Almeida, Maria Teresa; Pinheiro, Jorge Campos; Sousa, Sandra; Cabanes, Didier

2017-05-01

Listeria monocytogenes is a major intracellular human foodborne bacterial pathogen. We previously revealed L. monocytogenes cadC as highly expressed during mouse infection. Here we show that L. monocytogenes CadC is a sequence-specific, DNA-binding and cadmium-dependent regulator of CadA, an efflux pump conferring cadmium resistance. CadC but not CadA is required for L. monocytogenes infection in vivo. Interestingly, CadC also directly represses lspB, a gene encoding a lipoprotein signal peptidase whose expression appears detrimental for infection. lspB overexpression promotes the release of the LpeA lipoprotein to the extracellular medium, inducing tumor necrosis factor α and interleukin 6 expression, thus impairing L. monocytogenes survival in macrophages. We propose that L. monocytogenes uses CadC to repress lspB expression during infection to avoid LpeA exposure to the host immune system, diminishing inflammatory cytokine expression and promoting intramacrophagic survival and virulence. CadC appears as the first metal efflux pump regulator repurposed during infection to fine-tune lipoprotein processing and host responses. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Computer-Aided Design in Further Education.

ERIC Educational Resources Information Center

Ingham, Peter, Ed.

This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

CT Colonography with Computer-aided Detection: Recognizing the Causes of False-Positive Reader Results

PubMed Central

Dachman, Abraham H.; Wroblewski, Kristen; Vannier, Michael W.; Horne, John M.

2014-01-01

Computed tomography (CT) colonography is a screening modality used to detect colonic polyps before they progress to colorectal cancer. Computer-aided detection (CAD) is designed to decrease errors of detection by finding and displaying polyp candidates for evaluation by the reader. CT colonography CAD false-positive results are common and have numerous causes. The relative frequency of CAD false-positive results and their effect on reader performance on the basis of a 19-reader, 100-case trial shows that the vast majority of CAD false-positive results were dismissed by readers. Many CAD false-positive results are easily disregarded, including those that result from coarse mucosa, reconstruction, peristalsis, motion, streak artifacts, diverticulum, rectal tubes, and lipomas. CAD false-positive results caused by haustral folds, extracolonic candidates, diminutive lesions (<6 mm), anal papillae, internal hemorrhoids, varices, extrinsic compression, and flexural pseudotumors are almost always recognized and disregarded. The ileocecal valve and tagged stool are common sources of CAD false-positive results associated with reader false-positive results. Nondismissable CAD soft-tissue polyp candidates larger than 6 mm are another common cause of reader false-positive results that may lead to further evaluation with follow-up CT colonography or optical colonoscopy. Strategies for correctly evaluating CAD polyp candidates are important to avoid pitfalls from common sources of CAD false-positive results. ©RSNA, 2014 PMID:25384290

Socioeconomic Factors and Severity of Coronary Artery Disease in Patients Undergoing Coronary Angiography: A Multicentre Study of Arabian Gulf States.

PubMed

Daoulah, Amin; Elkhateeb, Osama E; Nasseri, S Ali; Al-Murayeh, Mushabab; Al-Kaabi, Salem; Lotfi, Amir; Alama, Mohamed N; Al-Faifi, Salem M; Haddara, Mamdouh; Dixon, Ciaran M; Alzahrani, Ibrahim S; Alghamdi, Abdullah A; Ahmed, Waleed; Fathey, Adnan; Haq, Ejazul; Alsheikh-Ali, Alawi A

2017-01-01

Coronary artery disease (CAD) is a leading cause of death worldwide. The association of socioeconomic status with CAD is supported by numerous epidemiological studies. Whether such factors also impact the number of diseased coronary vessels and its severity is not well established. We conducted a prospective multicentre, multi-ethnic, cross sectional observational study of consecutive patients undergoing coronary angiography (CAG) at 5 hospitals in the Kingdom of Saudi Arabia and the United Arab Emirates. Baseline demographics, socioeconomic, and clinical variables were collected for all patients. Significant CAD was defined as ≥70% luminal stenosis in a major epicardial vessel. Left main disease (LMD) was defined as ≥50% stenosis in the left main coronary artery. Multi-vessel disease (MVD) was defined as having >1 significant CAD. Of 1,068 patients (age 59 ± 13, female 28%, diabetes 56%, hypertension 60%, history of CAD 43%), 792 (74%) were from urban and remainder (26%) from rural communities. Patients from rural centres were older (61 ± 12 vs 58 ± 13), and more likely to have a history of diabetes (63 vs 54%), hypertension (74 vs 55%), dyslipidaemia (78 vs 59%), CAD (50 vs 41%) and percutaneous coronary intervention (PCI) (27 vs 21%). The two groups differed significantly in terms of income level, employment status and indication for angiography. After adjusting for baseline differences, patients living in a rural area were more likely to have significant CAD (adjusted OR 2.40 [1.47, 3.97]), MVD (adjusted OR 1.76 [1.18, 2.63]) and LMD (adjusted OR 1.71 [1.04, 2.82]). Higher income was also associated with a higher risk for significant CAD (adjusted OR 6.97 [2.30, 21.09]) and MVD (adjusted OR 2.49 [1.11, 5.56]), while unemployment was associated with a higher risk of significant CAD (adjusted OR 2.21, [1.27, 3.85]). Communal and socioeconomic factors are associated with higher odds of significant CAD and MVD in the group of patients referred for CAG. The underpinnings of these associations ( e.g. pathophysiologic factors, access to care, and system-wide determinants of quality) require further study.

Prevalence of Sleep-Disordered Breathing and Patient Characteristics in a Coronary Artery Disease Cohort Undergoing Cardiovascular Rehabilitation.

PubMed

Fox, Henrik; Purucker, Hans-Christian; Holzhacker, Isabelle; Tebtmann, Ulrich; Bitter, Thomas; Horstkotte, Dieter; Graml, Andrea; Woehrle, Holger; Oldenburg, Olaf

Coronary artery disease (CAD) is a leading cause of death and identification of risk factors for CAD is crucial. One such potential risk factor is sleep-disordered breathing (SDB). This prospective cohort study investigated the prevalence of SDB and determined risk factors for the presence of SDB in a large CAD cohort undergoing cardiac rehabilitation. A total of 1425 patients with confirmed CAD starting rehabilitation were screened for SDB using cardiorespiratory polygraphy (n = 921) or polygraphy plus pulse oximetry (n = 484). A total of 1408 patients were included; 69.5% were male, 78% had acute coronary syndrome, and 22% had stable CAD. The prevalence of SDB (apnea-hypopnea index [AHI] ≥5/h) was 83%. Moderate to severe SDB (AHI ≥15/h) was present in 53%. Up to 70% of coronary artery bypass graft (CABG) recipients had an AHI ≥15/h versus 33% of those who had not undergone CABG. SDB severity did not vary significantly in patients with stable CAD or on the basis of left ventricular ejection fraction. SDB was more severe and the frequency of oxygen desaturation was higher in men than in women. Multivariate logistic regression identified age, sex, body mass index, and CABG as independent risk factors for severe SDB. SDB is a highly prevalent comorbidity in patients with CAD, particularly those who have undergone CABG. These results strengthen existing associations and emphasize the importance of diagnosing and monitoring SDB in patients with CAD entering a cardiac rehabilitation program. Early diagnosis and intervention has the potential to have a beneficial effect on CAD prognosis.

An application protocol for CAD to CAD transfer of electronic information

NASA Technical Reports Server (NTRS)

Azu, Charles C., Jr.

1993-01-01

The exchange of Computer Aided Design (CAD) information between dissimilar CAD systems is a problem. This is especially true for transferring electronics CAD information such as multi-chip module (MCM), hybrid microcircuit assembly (HMA), and printed circuit board (PCB) designs. Currently, there exists several neutral data formats for transferring electronics CAD information. These include IGES, EDIF, and DXF formats. All these formats have limitations for use in exchanging electronic data. In an attempt to overcome these limitations, the Navy's MicroCIM program implemented a project to transfer hybrid microcircuit design information between dissimilar CAD systems. The IGES (Initial Graphics Exchange Specification) format is used since it is well established within the CAD industry. The goal of the project is to have a complete transfer of microelectronic CAD information, using IGES, without any data loss. An Application Protocol (AP) is being developed to specify how hybrid microcircuit CAD information will be represented by IGES entity constructs. The AP defines which IGES data items are appropriate for describing HMA geometry, connectivity, and processing as well as HMA material characteristics.

Electron spin resonance characterization of vascular xanthine and NAD(P)H oxidase activity in patients with coronary artery disease: relation to endothelium-dependent vasodilation.

PubMed

Spiekermann, Stephan; Landmesser, Ulf; Dikalov, Sergey; Bredt, Martin; Gamez, Graciela; Tatge, Helma; Reepschläger, Nina; Hornig, Burkhard; Drexler, Helmut; Harrison, David G

2003-03-18

Increased inactivation of nitric oxide by superoxide (O2*-) contributes to endothelial dysfunction in patients with coronary disease (CAD). We therefore characterized the vascular activities of xanthine oxidase and NAD(P)H oxidase, 2 major O2*--producing enzyme systems, and their relationship with flow-dependent, endothelium-mediated vasodilation (FDD) in patients with CAD. Xanthine- and NAD(P)H-mediated O*.- formation was determined in coronary arteries from 10 patients with CAD and 10 controls by using electron spin resonance spectroscopy. Furthermore, activity of endothelium-bound xanthine oxidase in vivo and FDD of the radial artery were determined in 21 patients with CAD and 10 controls. FDD was measured before and after infusion of the antioxidant vitamin C (25 mg/min i.a.) to determine the portion of FDD inhibited by radicals. In coronary arteries from patients with CAD, xanthine- and NAD(P)H-mediated O2*- formation was increased compared with controls (xanthine: 12+/-2 versus 7+/-1 nmol O2*-/ microg protein; NADH: 11+/-1 versus 7+/-1 nmol O2*-/ microg protein; and NADPH: 12+/-2 versus 9+/-1 nmol O2*-/ microg protein; each P<0.05). Endothelium-bound xanthine oxidase activity was increased by >200% in patients with CAD (25+/-4 versus 9+/-1 nmol O2*-/ microL plasma per min; P<0.05) and correlated inversely with FDD (r=-0.55; P<0.05) and positively with the effect of vitamin C on FDD (r=0.54; P<0.05). The present study represents the first electron spin resonance measurements of xanthine and NAD(P)H oxidase activity in human coronary arteries and supports the concept that increased activities of both enzymes contribute to increased vascular oxidant stress in patients with CAD. Furthermore, the present study suggests that increased xanthine oxidase activity contributes to endothelial dysfunction in patients with CAD and may thereby promote the atherosclerotic process.

Preparation of chitosan/amine modified diatomite composites and adsorption properties of Hg(II) ions.

PubMed

Fu, Yong; Huang, Yue; Hu, Jianshe; Zhang, Zhengjie

2018-03-01

A green functional adsorbent (CAD) was prepared by Schiff base reaction of chitosan and amino-modified diatomite. The morphology, structure and adsorption properties of the CAD were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and Brunauer Emmett Teller measurements. The effect of pH value, contact time and temperature on the adsorption of Hg(II) ions for the CAD is discussed in detail. The experimental results showed that the CAD had a large specific surface area and multifunctional groups such as amino, hydroxyl and Schiff base. The optimum adsorption effect was obtained when the pH value, temperature and contact time were 4, 25 °C and 120 min, respectively, and the corresponding maximum adsorption capacity of Hg(II) ions reached 102 mg/g. Moreover, the adsorption behavior of Hg(II) ions for the CAD followed the pseudo-second-order kinetic model and Langmuir model. The negative ΔG 0 and ΔH 0 suggested that the adsorption was a spontaneous exothermic process.

Impact of cardiac hybrid imaging-guided patient management on clinical long-term outcome.

PubMed

Benz, Dominik C; Gaemperli, Lara; Gräni, Christoph; von Felten, Elia; Giannopoulos, Andreas A; Messerli, Michael; Buechel, Ronny R; Gaemperli, Oliver; Pazhenkottil, Aju P; Kaufmann, Philipp A

2018-06-15

Although randomized trials have provided evidence for invasive fractional flow reserve to guide revascularization, evidence for non-invasive imaging is less well established. The present study investigated whether hybrid coronary computed tomography (CCTA)/single photon emission computed tomography (SPECT) myocardial perfusion imaging (MPI) can identify patients who benefit from early revascularization compared to medical therapy. This retrospective study consists of 414 patients referred for evaluation of known or suspected coronary artery disease (CAD) with CCTA/SPECT hybrid imaging. CCTA categorized patients into no CAD, non-high-risk CAD and high-risk CAD. In patients with CAD (n = 329), a matched finding (n = 75) was defined as a reversible perfusion defect in a territory subtended by a coronary artery with CAD. All other combinations of pathologic findings were classified as unmatched (n = 254). Death, myocardial infarction, unstable angina requiring hospitalization, and late coronary revascularization were defined as major adverse cardiac events (MACE). Cox hazards models included covariates age, male gender, more than two risk factors, previous CABG, high-risk CAD and early revascularization. During median follow-up of 6.0 years, 112 patients experienced a MACE (27%). Early revascularization (n = 50) was independently associated with improved outcome among patients with a matched finding (p < 0.001). There was no benefit among patients with an unmatched finding (p = 0.787), irrespective of presence (p = 0.505) or absence of high-risk CAD (p = 0.631). Early revascularization is associated with an outcome benefit in CAD patients with a matched finding documented by cardiac hybrid imaging while no benefit of revascularization was observed in patients with an unmatched finding. Copyright © 2018 Elsevier B.V. All rights reserved.

Stress-induced ST-segment deviation in relation to the presence and severity of coronary artery disease in patients with normal myocardial perfusion imaging.

PubMed

Weinsaft, Jonathan W; Manoushagian, Shant J; Patel, Taral; Shakoor, Aqsa; Kim, Robert J; Mirchandani, Sunil; Lin, Fay; Wong, Franklin J; Szulc, Massimiliano; Okin, Peter M; Kligfield, Paul D; Min, James K

2009-01-01

To assess the utility of stress electrocardiography (ECG) for identifying the presence and severity of obstructive coronary artery disease (CAD) defined by coronary computed tomographic angiography (CCTA) among patients with normal nuclear myocardial perfusion imaging (MPI). The study population comprised 119 consecutive patients with normal MPI who also underwent CCTA (interval 3.5+/-3.8 months). Stress ECG was performed at the time of MPI. CCTA and MPI were interpreted using established scoring systems, and CCTA was used to define the presence and extent of CAD, which was quantified by a coronary artery jeopardy score. Within this population, 28 patients (24%) had obstructive CAD identified by CCTA. The most common CAD pattern was single-vessel CAD (61%), although proximal vessel involvement was present in 46% of patients. Patients with CAD were nearly three times more likely to have positive standard test responses (1 mm ST-segment deviation) than patients with patent coronary arteries (36 vs. 13%, P=0.007). In multivariate analysis, a positive ST-segment test response was an independent marker for CAD (odds ratio: 2.02, confidence interval: 1.09-3.78, P=0.03) even after adjustment for a composite of clinical cardiac risk factors (odds ratio: 1.85, confidence interval: 1.05-3.23, P=0.03). Despite uniformly normal MPI, mean coronary jeopardy score was three-fold higher among patients with positive compared to those with negative ST-segment response to exercise or dobutamine stress (1.9+/-2.7 vs. 0.5+/-1.4, P=0.03). Stress-induced ST-segment deviation is an independent marker for obstructive CAD among patients with normal MPI. A positive stress ECG identifies patients with a greater anatomic extent of CAD as quantified by coronary jeopardy score.

Socioeconomic Factors and Severity of Coronary Artery Disease in Patients Undergoing Coronary Angiography: A Multicentre Study of Arabian Gulf States

PubMed Central

Daoulah, Amin; Elkhateeb, Osama E.; Nasseri, S. Ali; Al-Murayeh, Mushabab; Al-kaabi, Salem; Lotfi, Amir; Alama, Mohamed N.; Al-Faifi, Salem M.; Haddara, Mamdouh; Dixon, Ciaran M.; Alzahrani, Ibrahim S.; Alghamdi, Abdullah A.; Ahmed, Waleed; Fathey, Adnan; Haq, Ejazul; Alsheikh-Ali, Alawi A

2017-01-01

Introduction: Coronary artery disease (CAD) is a leading cause of death worldwide. The association of socioeconomic status with CAD is supported by numerous epidemiological studies. Whether such factors also impact the number of diseased coronary vessels and its severity is not well established. Materials and Methods: We conducted a prospective multicentre, multi-ethnic, cross sectional observational study of consecutive patients undergoing coronary angiography (CAG) at 5 hospitals in the Kingdom of Saudi Arabia and the United Arab Emirates. Baseline demographics, socioeconomic, and clinical variables were collected for all patients. Significant CAD was defined as ≥70% luminal stenosis in a major epicardial vessel. Left main disease (LMD) was defined as ≥50% stenosis in the left main coronary artery. Multi-vessel disease (MVD) was defined as having >1 significant CAD. Results: Of 1,068 patients (age 59 ± 13, female 28%, diabetes 56%, hypertension 60%, history of CAD 43%), 792 (74%) were from urban and remainder (26%) from rural communities. Patients from rural centres were older (61 ± 12 vs 58 ± 13), and more likely to have a history of diabetes (63 vs 54%), hypertension (74 vs 55%), dyslipidaemia (78 vs 59%), CAD (50 vs 41%) and percutaneous coronary intervention (PCI) (27 vs 21%). The two groups differed significantly in terms of income level, employment status and indication for angiography. After adjusting for baseline differences, patients living in a rural area were more likely to have significant CAD (adjusted OR 2.40 [1.47, 3.97]), MVD (adjusted OR 1.76 [1.18, 2.63]) and LMD (adjusted OR 1.71 [1.04, 2.82]). Higher income was also associated with a higher risk for significant CAD (adjusted OR 6.97 [2.30, 21.09]) and MVD (adjusted OR 2.49 [1.11, 5.56]), while unemployment was associated with a higher risk of significant CAD (adjusted OR 2.21, [1.27, 3.85]). Conclusion: Communal and socioeconomic factors are associated with higher odds of significant CAD and MVD in the group of patients referred for CAG. The underpinnings of these associations (e.g. pathophysiologic factors, access to care, and system-wide determinants of quality) require further study. PMID:28553410

TARDEC FIXED HEEL POINT (FHP): DRIVER CAD ACCOMMODATION MODEL VERIFICATION REPORT

DTIC Science & Technology

2017-11-09

SUPPLEMENTARY NOTES N/A 14. ABSTRACT Easy-to-use Computer-Aided Design (CAD) tools, known as accommodation models, are needed by the ground vehicle... designers when developing the interior workspace for the occupant. The TARDEC Fixed Heel Point (FHP): Driver CAD Accommodation Model described in this...is intended to provide the composite boundaries representing the body of the defined target design population, including posture prediction

The relationship of insulin resistance estimated by triglyceride glucose index and coronary plaque characteristics.

PubMed

Won, Ki-Bum; Kim, Yun Seok; Lee, Byoung Kwon; Heo, Ran; Han, Donghee; Lee, Ji Hyun; Lee, Sang-Eun; Sung, Ji Min; Cho, Iksung; Park, Hyung-Bok; Cho, In-Jeong; Chang, Hyuk-Jae

2018-05-01

The triglyceride glucose (TyG) index is a useful surrogate marker for insulin resistance, which is an important risk factor for coronary artery disease (CAD). However, data on the relationship of the TyG index and coronary plaque characteristics are limited.This study included 2840 participants with near-normal renal function who underwent coronary computed tomography angiography. CAD was defined as the presence of any plaques, and obstructive CAD was defined as the presence of plaques with ≥50% stenosis. The relationship between the TyG index and noncalcified plaque (NCP), calcified or mixed plaque (CMP), and coronary artery calcium score (CACS) was evaluated.All participants were stratified into 4 groups based on the quartiles of the TyG index. The prevalence of CAD and obstructive CAD significantly increased with increasing quartiles. The risk for NCP and obstructive NCP was not different among all groups. However, compared with group I (lowest quartile), the risk for CMP was higher in groups III (odds ratio [OR]: 1.438) and IV (highest quartile) (OR: 1.895) (P < .05), and that for obstructive CMP was higher in groups II (OR: 1.469), III (OR: 1.595), and IV (OR: 2.168) (P < .05). Multivariate regression analysis showed that the TyG index was associated with an increased risk for CAD (OR: 1.700), obstructive CAD (OR: 1.692), and CACS >400 (OR: 1.448) (P < .05).The TyG index was independently associated with the presence and severity of CAD due to an increased risk for CMP.

Analog Computer-Aided Detection (CAD) information can be more effective than binary marks.

PubMed

Cunningham, Corbin A; Drew, Trafton; Wolfe, Jeremy M

2017-02-01

In socially important visual search tasks, such as baggage screening and diagnostic radiology, experts miss more targets than is desirable. Computer-aided detection (CAD) programs have been developed specifically to improve performance in these professional search tasks. For example, in breast cancer screening, many CAD systems are capable of detecting approximately 90% of breast cancer, with approximately 0.5 false-positive detections per image. Nevertheless, benefits of CAD in clinical settings tend to be small (Birdwell, 2009) or even absent (Meziane et al., 2011; Philpotts, 2009). The marks made by a CAD system can be "binary," giving the same signal to any location where the signal is above some threshold. Alternatively, a CAD system presents an analog signal that reflects strength of the signal at a location. In the experiments reported, we compare analog and binary CAD presentations using nonexpert observers and artificial stimuli defined by two noisy signals: a visible color signal and an "invisible" signal that informed our simulated CAD system. We found that analog CAD generally yielded better overall performance than binary CAD. The analog benefit is similar at high and low target prevalence. Our data suggest that the form of the CAD signal can directly influence performance. Analog CAD may allow the computer to be more helpful to the searcher.

Cervical artificial disc extrusion after a paragliding accident

PubMed Central

Niu, Tianyi; Hoffman, Haydn; Lu, Daniel C.

2017-01-01

Background: Cervical total disc replacement (TDR) is an established alternative to anterior cervical discectomy and fusion (ACDF) with excellent long-term outcomes and low failure rates. Cases of implant failure and migration are scarce and primarily limited to several years postoperatively. The authors report a case of anterior extrusion of a C4-C5 ProDisc-C (DePuy Synthes, West Chester, PA, USA) cervical artificial disc (CAD) 14 months after placement due to minor trauma. Case Description: A 33-year-old female who had undergone C4-C5 CAD implantation presented with neck pain and spasm after experiencing a paragliding accident. A 4 mm anterior protrusion of the CAD was seen on x-ray. She underwent removal of the CAD followed by anterior fusion. Other cases of CAD extrusion in the literature are discussed and the device's durability and testing are considered. Conclusion: Overall, CAD extrusion is a rare event. This case is likely the result of insufficient osseous integration. Patients undergoing cervical TDR should avoid high-risk activities to prevent trauma that could compromise the disc's placement, and future design/research should focus on how to enhance osseous integration at the interface while minimizing excessive heterotopic ossification. PMID:28781915

Cervical artificial disc extrusion after a paragliding accident.

PubMed

Niu, Tianyi; Hoffman, Haydn; Lu, Daniel C

2017-01-01

Cervical total disc replacement (TDR) is an established alternative to anterior cervical discectomy and fusion (ACDF) with excellent long-term outcomes and low failure rates. Cases of implant failure and migration are scarce and primarily limited to several years postoperatively. The authors report a case of anterior extrusion of a C4-C5 ProDisc-C (DePuy Synthes, West Chester, PA, USA) cervical artificial disc (CAD) 14 months after placement due to minor trauma. A 33-year-old female who had undergone C4-C5 CAD implantation presented with neck pain and spasm after experiencing a paragliding accident. A 4 mm anterior protrusion of the CAD was seen on x-ray. She underwent removal of the CAD followed by anterior fusion. Other cases of CAD extrusion in the literature are discussed and the device's durability and testing are considered. Overall, CAD extrusion is a rare event. This case is likely the result of insufficient osseous integration. Patients undergoing cervical TDR should avoid high-risk activities to prevent trauma that could compromise the disc's placement, and future design/research should focus on how to enhance osseous integration at the interface while minimizing excessive heterotopic ossification.

Speech summer camp for treating articulation disorders in cleft palate patients.

PubMed

Pamplona, Carmen; Ysunza, Antonio; Patiño, Carmeluza; Ramírez, Elena; Drucker, Mónica; Mazón, Juán J

2005-03-01

Compensatory articulation disorder (CAD) severely affects speech intelligibility of cleft palate children. CAD must be treated with speech therapy. Children can manage articulation better when they use language in event contexts such as every day routines. The purpose of this paper is to study and compare two modalities of speech intervention in cleft palate children with associated CAD. The first modality is a conventional approach providing speech therapy in 1-h sessions, twice a week. The second modality is a speech summer camp in which children received therapy 4h per day, 5 days a week for a period of 3 weeks. We were aimed to determine if a speech summer camp could significantly enhance articulation in CP children with CAD. Forty-five children with repaired cleft palates who exhibited CAD were studied. A matched control group of 45 children with repaired cleft palate who also exhibited CAD were identified. The patients included in the first group attended a speech summer camp for 3 weeks. The matched control subjects included in the second group received speech therapy aimed to correct CAD twice per-week in 1-h sessions. At the onset of either the summer camp or the speech therapy period, the severity of CAD was evenly distributed with non-significant differences across both groups of patients (p > 0.05). After the summer camp (3 weeks) or 12 months of speech therapy sessions at a frequency of twice per-week, both groups of patients showed a significant decrease in the severity of their CAD (p < 0.05). However, when the distribution of the severity of CAD was compared at the end of the summer camp or the speech therapy period, non-significant differences were found between both groups of patients (p > 0.05). A speech summer camp is a valid and efficient method for providing speech therapy in cleft palate children with compensatory articulation disorder.

New insights into the interplay between the lysine transporter LysP and the pH sensor CadC in Escherichia coli.

PubMed

Rauschmeier, Martina; Schüppel, Valentina; Tetsch, Larissa; Jung, Kirsten

2014-01-09

The coordination of signal transduction and substrate transport represents a sophisticated way to integrate information on metabolite fluxes into transcriptional regulation. This widely distributed process involves protein-protein interactions between two integral membrane proteins. Here we report new insights into the molecular mechanism of the regulatory interplay between the lysine-specific permease LysP and the membrane-integrated pH sensor CadC, which together induce lysine-dependent adaptation of E. coli under acidic stress. In vivo analyses revealed that, in the absence of either stimulus, the two proteins form a stable association, which is modulated by lysine and low pH. In addition to its transmembrane helix, the periplasmic domain of CadC also participated in the interaction. Site-directed mutagenesis pinpointed Arg265 and Arg268 in CadC as well as Asp275 and Asp278 in LysP as potential periplasmic interaction sites. Moreover, a systematic analysis of 100 LysP variants with single-site replacements indicated that the lysine signal is transduced from co-sensor to sensor via lysine-dependent conformational changes (upon substrate binding and/or transport) of LysP. Our results suggest a scenario in which CadC is inhibited by LysP via intramembrane and periplasmic contacts under non-inducing conditions. Upon induction, lysine-dependent conformational changes in LysP transduce the lysine signal via a direct conformational coupling to CadC without resolving the interaction completely. Moreover, concomitant pH-dependent protonation of periplasmic amino acids in both proteins dissolves their electrostatic connections resulting in further destabilization of the CadC/LysP interaction. © 2013.

Enhanced Biological Functions of Human Mesenchymal Stem-Cell Aggregates Incorporating E-Cadherin-Modified PLGA Microparticles.

PubMed

Zhang, Yan; Mao, Hongli; Gao, Chao; Li, Suhua; Shuai, Qizhi; Xu, Jianbin; Xu, Ke; Cao, Lei; Lang, Ren; Gu, Zhongwei; Akaike, Toshihiro; Yang, Jun

2016-08-01

Mesenchymal stem cells (MSCs) have emerged as a promising source of multipotent cells for various cell-based therapies due to their unique properties, and formation of 3D MSC aggregates has been explored as a potential strategy to enhance therapeutic efficacy. In this study, poly(lactic-co-glycolic acid) (PLGA) microparticles modified with human E-cadherin fusion protein (hE-cad-PLGA microparticles) have been fabricated and integrated with human MSCs to form 3D cell aggregates. The results show that, compared with the plain PLGA, the hE-cad-PLGA microparticles distribute within the aggregates more evenly and further result in a more significant improvement of cellular proliferation and secretion of a series of bioactive factors due to the synergistic effects from the bioactive E-cadherin fragments and the PLGA microparticles. Meanwhile, the hE-cad-PLGA microparticles incorporated in the aggregates upregulate the phosphorylation of epidermal growth factor receptors and activate the AKT and ERK1/2 signaling pathways in the MSCs. Additionally, the E-cadherin/β-catenin cellular membrane complex in the MSCs is markedly stimulated by the hE-cad-PLGA microparticles. Therefore, engineering 3D cell aggregates with hE-cad-PLGA microparticles can be a promising method for ex vivo multipotent stem-cell expansion with enhanced biological functions and may offer a novel route to expand multipotent stem-cell-based clinical applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Economic evaluation of Helicobacter pylori eradication in the CADET-Hp randomized controlled trial of H. pylori-positive primary care patients with uninvestigated dyspepsia.

PubMed

Chiba, N; Veldhuyzen Van Zanten, S J O; Escobedo, S; Grace, E; Lee, J; Sinclair, P; Barkun, A; Armstrong, D; Thomson, A B R

2004-02-01

Adult Helicobacter pylori-positive patients by 13C-urea breath test with uninvestigated dyspepsia symptoms were randomized to 1-week eradication treatment with omeprazole, metronidazole and clarithromycin (OMC) vs. omeprazole and placebo antimicrobials (OPP) in the Canadian Adult Dyspepsia Empiric Treatment-H. pylori-positive (CADET-Hp) study. To perform an economic evaluation of this 1-year study. Following blind eradication treatment, family practitioners managed patients according to their usual practices. Health resource utilization information was collected prospectively. From the mean costs of the health resources consumed and the treatment outcomes, the incremental cost-effectiveness ratios and incremental net benefits of eradication treatment vs. OPP were determined. Eradication therapy significantly improved dyspepsia symptoms (treatment success: OMC, 50%; OPP, 36%; P = 0.02). The incremental cost-effectiveness ratio of OMC vs. OPP was - 387 Canadian dollars (CAD$) per treatment success (90% CI, - CAD$1707, CAD$607), indicating a lower cost with treatment success. The incremental net benefit analysis showed that H. pylori eradication was cost-effective if the willingness-to-pay value exceeded a nominal figure of CAD$100 from a health service perspective or CAD$607 from the societal perspective. In uninvestigated patients presenting with dyspepsia at the primary care level, eradication of H. pylori in those who are H. pylori positive leads to a cost-effective improvement in dyspepsia symptoms compared with a strategy of not eradicating H. pylori in these patients.

Analog Computer-Aided Detection (CAD) information can be more effective than binary marks

PubMed Central

Cunningham, Corbin A.; Drew, Trafton; Wolfe, Jeremy M.

2017-01-01

In socially important visual search tasks such as baggage screening and diagnostic radiology, experts miss more targets than is desirable. Computer Aided Detection (CAD) programs have been developed specifically to help improve performance in these professional search tasks. For example, in breast cancer screening, many CAD systems are capable of detecting approximately 90% of breast cancer, with approximately 0.5 false positive detections per image. Nevertheless, benefits of CAD in clinical settings tend to be small (Birdwell, 2009) or even absent (Meziane et al., 2011; Philpotts, 2009). The marks made by a CAD system can be “Binary”, giving the same signal to any location where the signal is above some threshold. Alternatively, a CAD system present an Analog signal that reflected strength of the signal at a location. In the experiments reported here, we compare analog and binary CAD presentations using non-expert observers and artificial stimuli defined by two noisy signals: a visible color signal and an "invisible" signal that informed our simulated CAD system. We found that analog CAD generally yielded better overall performance than binary CAD. The analog benefit is similar at high and low target prevalence. Our data suggest that the form of the CAD signal can directly influence performance. Analog CAD may allow the computer to be more helpful to the searcher. PMID:27928658

Allopurinol, benzbromarone and risk of coronary heart disease in gout patients: A population-based study.

PubMed

Lin, Hsiu-Chen; Daimon, Masao; Wang, Ching-Hung; Ho, Yi; Uang, Yow-Shieng; Chiang, Shuo-Ju; Wang, Li-Hsuan

2017-04-15

The effect of gout on the risk of developing coronary artery disease (CAD) is uncertain. Some studies have found that gout is a risk factor for acute myocardial infarction. This study examined the changes in risk of CAD in gout patients taking allopurinol and/or benzbromarone, and analyzed the dose-response relationship of both drugs with CAD incidence. The medical records of one million subjects from 2000 to 2011 were provided by the Taiwan National Health Insurance Research Database. Cox proportional hazard ratio was used to compare the risk of CAD in gout patients taking allopurinol or/and benzbromarone with those taking neither drug. Hazard ratios (HR) were adjusted for possible confounding factors, including age, gender, hypertension, hyperlipidemia, diabetes mellitus, chronic kidney disease, and relevant medications. Of 8047 gout patients, 1422 were treated with allopurinol (Group A), 4141 with benzbromarone (Group B), and 2484 with both drugs (Group A/B) during the follow-up period. Our results showed the incidence of CAD after adjusting for covariates for Group A, Group B, and Group A/B did not significantly differ from the comparison group. However, after adjustment for covariates in dose-response analyses, treatment with over 270 defined daily doses (DDDs) of allopurinol, and over 360 DDDs of benzbromarone, was associated with a significantly reduced risk of CAD. We found that the use of allopurinol and benzbromarone, whether alone or in combination, had a linear dose-response relationship between the numbers of defined daily doses and the risk of CAD, especially in higher DDDs. Copyright © 2017 Elsevier B.V. All rights reserved.

Computer-aided diagnosis in radiological imaging: current status and future challenges

NASA Astrophysics Data System (ADS)

Doi, Kunio

2009-10-01

Computer-aided diagnosis (CAD) has become one of the major research subjects in medical imaging and diagnostic radiology. Many different types of CAD schemes are being developed for detection and/or characterization of various lesions in medical imaging, including conventional projection radiography, CT, MRI, and ultrasound imaging. Commercial systems for detection of breast lesions on mammograms have been developed and have received FDA approval for clinical use. CAD may be defined as a diagnosis made by a physician who takes into account the computer output as a "second opinion". The purpose of CAD is to improve the quality and productivity of physicians in their interpretation of radiologic images. The quality of their work can be improved in terms of the accuracy and consistency of their radiologic diagnoses. In addition, the productivity of radiologists is expected to be improved by a reduction in the time required for their image readings. The computer output is derived from quantitative analysis of radiologic images by use of various methods and techniques in computer vision, artificial intelligence, and artificial neural networks (ANNs). The computer output may indicate a number of important parameters, for example, the locations of potential lesions such as lung cancer and breast cancer, the likelihood of malignancy of detected lesions, and the likelihood of various diseases based on differential diagnosis in a given image and clinical parameters. In this review article, the basic concept of CAD is first defined, and the current status of CAD research is then described. In addition, the potential of CAD in the future is discussed and predicted.

Schools (Students) Exchanging CAD/CAM Files over the Internet.

ERIC Educational Resources Information Center

Mahoney, Gary S.; Smallwood, James E.

This document discusses how students and schools can benefit from exchanging computer-aided design/computer-aided manufacturing (CAD/CAM) files over the Internet, explains how files are exchanged, and examines the problem of selected hardware/software incompatibility. Key terms associated with information search services are defined, and several…

Einstein A coefficients for rovibronic lines of the A2Π → X2Σ+ and B2Σ+ → X2Σ+ transitions of CaH and CaD

NASA Astrophysics Data System (ADS)

Alavi, S. Fatemeh; Shayesteh, Alireza

2018-02-01

Calcium monohydride is an important diatomic molecule appearing in the spectra of sunspots and M dwarfs. We report complete line lists with Einstein A coefficients for the A2Π-X2Σ+ and B2Σ+-X2Σ+ electronic transitions of CaH and CaD radicals. The most recent ab initio transition dipole moments and potential energy curves were used for the calculation of vibronic band intensities, taking the Herman-Wallis effect into account, and the rotational line strengths were calculated using the PGOPHER program of Western. For the A2Π and B2Σ+ excited states of CaH and CaD, new off-diagonal electronic matrix elements were included in the Hamiltonian matrix, and new sets of spectroscopic constants were determined in order to accurately reproduce the line positions and relative intensities of the observed branches in laboratory spectra. For both CaH and CaD isotopologues, Einstein A coefficients were calculated for all possible rovibronic transitions from the v΄ = 0-3 vibrational levels of the A2Π state and the v΄ = 0-2 vibrational levels of the B2Σ+ state to the v″ = 0-4 vibrational levels of the X2Σ+ ground state. The line lists and intensities reported here can be used to accurately determine the amounts of CaH and CaD in stellar environments.

The association of sleep disordered breathing with left ventricular remodeling in CAD patients: a cross-sectional study.

PubMed

Alonderis, Audrius; Raskauskiene, Nijole; Gelziniene, Vaidute; Mickuviene, Narseta; Brozaitiene, Julija

2017-09-18

There is still insufficient knowledge on the potential effect of mild to moderate sleep-disordered breathing (SDB) that is widely prevalent, often asymptomatic, and largely undiagnosed in patients with stable coronary artery disease (CAD). SDB affects 34% of men and 17% of women aged between 30 and 70. The objective of this study was to evaluate the association between SDB and left ventricular (LV) hypertrophy as well as structural remodeling in stable CAD patients. The study was based on a cross-sectional design. Echocardiography and polysomnography was performed in 772 patients with CAD and with untreated sleep apnea. All study participants underwent testing by Epworth Sleepiness Scale questionnaire. Their mean age, NYHA and left ventricular ejection fraction were, respectively: 57 ± 9 years, 2.1 ± 0.5 and 51 ± 8%, and 76% were men. Sleep apnea (SA) was defined as an apnea-hypopnea-index (AHI) ≥5 events/h, and, non-SA, as an AHI <5. Sleep apnea was present in 39% of patients, and a large fraction of those patients had no complaints on excessive daytime sleepiness. The patients with SA were older, with higher body mass and higher prevalence of hypertension. LV hypertrophy (LVH), defined by allometrically corrected (LV mass/height 2.7 ) gender-independent criteria, was more common among the patients with SA than those without (86% vs. 74%, p < 0.001). The frequency of LVH by wall thickness criteria (interventricular septal thickness or posterior wall thickness ≥ 12 mm: 49% vs. 33%, p < 0.001) and concentric LVH (61% vs. 47%, p = 0.001) was higher in CAD patients with SA. The patients with SA had significantly higher values of both interventricular septal thickness and posterior wall thickness. Multiple logistic regression analysis showed that even mild sleep apnea was an independent predictor for LVH by wall thickness criteria and concentric LVH (OR = 1.5; 95% CI 1.04-2.2 and OR = 1.9; 1.3-2.9 respectively). We concluded that unrecognized sleep apnea was highly prevalent among patients with stable CAD, and the majority of those patients did not report daytime sleepiness. Mild to moderate sleep apnea was associated with increased LV wall thickness, LV mass, and with higher prevalence of concentric LV hypertrophy independently of coexisting obesity, hypertension, diabetes mellitus or advancing age.

[Advantages and disadvantages of endocrown restorations of endodontically treated teeth with large coronal destruction].

PubMed

Bao, X D

2018-04-09

The strength of endodontically treated teeth were reduced apparently because of structural damage, therefore further reduction of healthy tissue should be avoided as much as possible in restoration. Endocrown made by chair-side CAD/CAM is some kind of minimal invasive restoration, and the retention of restoration is achieved by reliable bonding and macromechanial retention forces. Without post preparation, the root structure could be resevered. Following the indications and use of biomechanical dentin-like CAD/CAM materials could reduce the adverse effect of tensile stress on cervical part.

Improved forage digestibility of tall fescue (Festuca arundinacea) by transgenic down-regulation of cinnamyl alcohol dehydrogenase.

PubMed

Chen, Lei; Auh, Chung-Kyoon; Dowling, Paul; Bell, Jeremey; Chen, Fang; Hopkins, Andrew; Dixon, Richard A; Wang, Zeng-Yu

2003-11-01

Lignification of cell walls during plant development has been identified as the major factor limiting forage digestibility and concomitantly animal productivity. cDNA sequences encoding a key lignin biosynthetic enzyme, cinnamyl alcohol dehydrogenase (CAD), were cloned from the widely grown monocotyledonous forage species tall fescue (Festuca arundinacea Schreb.). Recombinant tall fescue CAD expressed in E. coli exhibited the highest V(max)/K(m) values when coniferaldehyde and sinapaldehyde were used as substrates. Transgenic tall fescue plants carrying either sense or antisense CAD gene constructs were obtained by microprojectile bombardment of single genotype-derived embryogenic suspension cells. Severely reduced levels of mRNA transcripts and significantly reduced CAD enzymatic activities were found in two transgenic plants carrying sense and antisense CAD transgenes, respectively. These CAD down-regulated transgenic lines had significantly decreased lignin content and altered ratios of syringyl (S) to guaiacyl (G), G to p-hydroxyphenyl (H) and S to H units. No significant changes in cellulose, hemicellulose, neutral sugar composition, p-coumaric acid and ferulic acid levels were observed in the transgenic plants. Increases of in vitro dry matter digestibility of 7.2-9.5% were achieved in the CAD down-regulated lines, thus providing a novel germplasm to be used for the development of grass cultivars with improved forage quality.

Aortic stiffness improves the prediction of both diagnosis and severity of coronary artery disease.

PubMed

Yannoutsos, Alexandra; Ahouah, Mathieu; Dreyfuss Tubiana, Céline; Topouchian, Jirar; Safar, Michel E; Blacher, Jacques

2018-02-01

Elective coronography has low diagnostic yield for obstructive coronary artery disease (CAD). We aim to determine whether non-invasive aortic stiffness assessment improves diagnostic accuracy of CAD screening by reducing the number of false-positive results from the cardiac stress test. A cross-sectional study was conducted from January 2013 to September 2014 in our medical center. Electrocardiogram (ECG) stress test coupled with nuclear imaging was performed in 367 consecutive patients routinely followed for myocardial ischemia screening. Aortic pulse wave velocity (PWV) was assessed by applanation tonometry in the overall population. Forty-two patients underwent elective coronography because of ischemia. Theoretical PWV was calculated according to age, blood pressure and gender. The results were expressed as an index ((measured PWV-theoretical PWV)/theoretical PWV) for each patient. Ten patients presented with obstructive CAD, 16 patients had non-obstructive CAD and 16 patients had normal coronary angiography. PWV index and severity of CAD were positively correlated (P=0.001). All patients with obstructive CAD had a positive PWV index. When considering the PWV index retrospectively, the false positive results of cardiac stress test were significantly reduced (P<0.001). Twenty-three procedures may have been avoided in the present study cohort. The salient finding of this study was that in patients with known or suspected CAD, routinely followed aortic PWV index may be considered clinically useful for reducing the rate of unnecessary invasive angiographies. The clinical relevance of this individualized decision approach should be confirmed in a large-scale study. Prospective studies have the potential to evaluate the PWV index as a marker of CAD.

Aortic valve sclerosis as a marker of coronary artery atherosclerosis; a multicenter study of a large population with a low prevalence of coronary artery disease.

PubMed

Rossi, Andrea; Gaibazzi, Nicola; Dandale, Raje; Agricola, Eustachio; Moreo, Antonella; Berlinghieri, Nicola; Sartorio, Daniele; Loffi, Marco; De Chiara, Benedetta; Rigo, Fausto; Vassanelli, Corrado; Faggiano, Pompilio

2014-03-15

There are no studies analyzing the association between aortic valve sclerosis (AVS) and coronary artery disease (CAD) in a large and multicenter patient population with an overall low prevalence of CAD. We hypothesized that AVS could predict the presence and degree of CAD in patients with severe organic mitral regurgitation. We retrospectively analyzed consecutive patients with flail mitral leaflet who had coronary angiography for pre-surgical screening and not because suspect of CAD. End-points were considered: 1) any degree of CAD (stenosis>20%) and 2) obstructive CAD (stenosis>75% of at least one coronary artery). AVS was defined as focal areas of increased echogenicity and thickening of the leaflets. Traditional clinical risk factors were considered: age, male gender, hypertension (>140/90 mmHg or medical therapy), hypercholesterolemia (total cholesterol>200 mg/dl or statin), diabetes, family history of CAD and smoking habit. 675 patients (mean age: 64±12; 27% female) formed the study population. Among patients with AVS, 60% and 39% had any-CAD and ob-CAD respectively, on the opposite among patients without AVS 12% and 7% had any-CAD and ob-cad. After adjustment for clinical risk factors, AVS was associated with a 22.7 fold increased risk of any degree of CAD (95% CI 8.1 63.6 p<0.0001) and with a 21.8 fold increased risk of obstructive-CAD (95% CI 6.6 71.9; p<0.0001). In a large and multicenter sample of patient with flail mitral leaflet, AVS was strongly associated with the presence and degree of CAD independently of clinical risk factors. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Sex Differences in Cardiac Medication Use Post-Catheterization in Patients Undergoing Coronary Angiography for Stable Angina with Nonobstructive Coronary Artery Disease.

PubMed

Galway, Shannon; Adatia, Falisha; Grubisic, Maja; Lee, May; Daniele, Patrick; Humphries, Karin H; Sedlak, Tara L

2017-09-01

Treatment of patients with stable angina and nonobstructive coronary artery disease (CAD) has not been well characterized. We comparatively evaluated medication use in males and females with stable angina with no CAD, nonobstructive CAD, and obstructive CAD. We studied all patients ≥20 years old with stable angina undergoing coronary angiography in British Columbia (BC), Canada, from January 2008 to March 2010 (n = 7,535). No CAD, nonobstructive CAD, and obstructive CAD were defined as 0%, 1%-49%, and ≥50% luminal narrowing in any epicardial coronary artery, respectively. Medication use, 3 months before and 3 months following angiography, was obtained through BC PharmaNet for angiotensin-converting enzyme inhibitors (ACE-I), angiotensin receptor blockers (ARBs), calcium channel blockers (CCBs), beta-blockers, statins, antiplatelet agents, and prescriptions for all three ACE-I/ARBs, beta-blockers, and statins (combination therapy). Following angiography, patients with no and nonobstructive CAD had significantly lower rates of prescription use of all medications, including combination therapy, than patients with obstructive CAD (p < 0.001). Use of ACE-I/ARBs, beta-blockers, statins, and combination therapy did not differ by sex, but females had higher use of CCB in all CAD groups, and clopidogrel in nonobstructive and obstructive CAD groups, compared to males. In patients with stable angina, medication use following angiography is low in nonobstructive CAD with only 58.9% prescribed a statin and 19.4% on combination therapy at 3 months. There are no important sex differences in medication use in any CAD category post-angiography. Future studies should explore methods of improving quality of care in patients with nonobstructive CAD.

Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

ERIC Educational Resources Information Center

Nee, John G.; Kare, Audhut P.

1987-01-01

Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

Clinical Evaluation of Indirect Particle-Filled Composite Resin CAD/CAM Partial Crowns after 24 Months.

PubMed

Zimmermann, Moritz; Koller, Christina; Reymus, Marcel; Mehl, Albert; Hickel, Reinhard

2017-04-19

Resin-based CAD/CAM compound materials might be promising for single-tooth restorations. Insufficient clinical data are available for this new material class. The purpose of this study was to describe initial clinical in vivo results for indirect particle-filled composite resin CAD/CAM restorations after 24 months. Indirect particle-filled composite resin restorations were fabricated with a CAD/CAM method (CEREC Bluecam intraoral scanner, CEREC MCXL milling unit) by calibrated dental students. Forty-two partial crown restorations were seated adhesively in 30 patients with caries lesions or insufficient restorations (baseline). Strict inclusion criteria were defined for the patient collective. Follow-up evaluation comprised 40 restorations after 12 months and 33 restorations after 24 months. Evaluation criteria were modified FDI criteria with grades (1) to (5). Rating with FDI criteria (5) was defined as clinical failure. Statistical analysis was performed with Wilcoxon-Test (p < 0.05). The success rate of indirect particle-filled composite resin CAD/CAM restorations after 12 months was 95.0% with two debondings observed. The cumulative success rate for indirect particle-filled composite resin CAD/CAM restorations after 24 months was 85.7% with two tooth fractures and one debonding. Statistically significant differences were found for baseline and 24-month follow-up evaluation for anatomic form and marginal adaptation criterion examined in respect to FDI criteria guidelines (Wilcoxon-Test, p < 0.05). This study demonstrates particle-filled composite resin CAD/CAM restorations having a clinical success rate of 85.7% after 24 months. Adhesive bonding procedures need to be ensured carefully. A longer clinical evaluation period is necessary to draw further conclusions. © 2017 by the American College of Prosthodontists.

An isogeometric boundary element method for electromagnetic scattering with compatible B-spline discretizations

NASA Astrophysics Data System (ADS)

Simpson, R. N.; Liu, Z.; Vázquez, R.; Evans, J. A.

2018-06-01

We outline the construction of compatible B-splines on 3D surfaces that satisfy the continuity requirements for electromagnetic scattering analysis with the boundary element method (method of moments). Our approach makes use of Non-Uniform Rational B-splines to represent model geometry and compatible B-splines to approximate the surface current, and adopts the isogeometric concept in which the basis for analysis is taken directly from CAD (geometry) data. The approach allows for high-order approximations and crucially provides a direct link with CAD data structures that allows for efficient design workflows. After outlining the construction of div- and curl-conforming B-splines defined over 3D surfaces we describe their use with the electric and magnetic field integral equations using a Galerkin formulation. We use Bézier extraction to accelerate the computation of NURBS and B-spline terms and employ H-matrices to provide accelerated computations and memory reduction for the dense matrices that result from the boundary integral discretization. The method is verified using the well known Mie scattering problem posed over a perfectly electrically conducting sphere and the classic NASA almond problem. Finally, we demonstrate the ability of the approach to handle models with complex geometry directly from CAD without mesh generation.

A step-by-step introduction to rule-based design of synthetic genetic constructs using GenoCAD.

PubMed

Wilson, Mandy L; Hertzberg, Russell; Adam, Laura; Peccoud, Jean

2011-01-01

GenoCAD is an open source web-based system that provides a streamlined, rule-driven process for designing genetic sequences. GenoCAD provides a graphical interface that allows users to design sequences consistent with formalized design strategies specific to a domain, organization, or project. Design strategies include limited sets of user-defined parts and rules indicating how these parts are to be combined in genetic constructs. In addition to reducing design time to minutes, GenoCAD improves the quality and reliability of the finished sequence by ensuring that the designs follow established rules of sequence construction. GenoCAD.org is a publicly available instance of GenoCAD that can be found at www.genocad.org. The source code and latest build are available from SourceForge to allow advanced users to install and customize GenoCAD for their unique needs. This chapter focuses primarily on how the GenoCAD tools can be used to organize genetic parts into customized personal libraries, then how these libraries can be used to design sequences. In addition, GenoCAD's parts management system and search capabilities are described in detail. Instructions are provided for installing a local instance of GenoCAD on a server. Some of the future enhancements of this rapidly evolving suite of applications are briefly described. Copyright © 2011 Elsevier Inc. All rights reserved.

GPU-accelerated depth map generation for X-ray simulations of complex CAD geometries

NASA Astrophysics Data System (ADS)

Grandin, Robert J.; Young, Gavin; Holland, Stephen D.; Krishnamurthy, Adarsh

2018-04-01

Interactive x-ray simulations of complex computer-aided design (CAD) models can provide valuable insights for better interpretation of the defect signatures such as porosity from x-ray CT images. Generating the depth map along a particular direction for the given CAD geometry is the most compute-intensive step in x-ray simulations. We have developed a GPU-accelerated method for real-time generation of depth maps of complex CAD geometries. We preprocess complex components designed using commercial CAD systems using a custom CAD module and convert them into a fine user-defined surface tessellation. Our CAD module can be used by different simulators as well as handle complex geometries, including those that arise from complex castings and composite structures. We then make use of a parallel algorithm that runs on a graphics processing unit (GPU) to convert the finely-tessellated CAD model to a voxelized representation. The voxelized representation can enable heterogeneous modeling of the volume enclosed by the CAD model by assigning heterogeneous material properties in specific regions. The depth maps are generated from this voxelized representation with the help of a GPU-accelerated ray-casting algorithm. The GPU-accelerated ray-casting method enables interactive (> 60 frames-per-second) generation of the depth maps of complex CAD geometries. This enables arbitrarily rotation and slicing of the CAD model, leading to better interpretation of the x-ray images by the user. In addition, the depth maps can be used to aid directly in CT reconstruction algorithms.

Impact of body mass index and metabolic phenotypes on coronary artery disease according to glucose tolerance status.

PubMed

Fujihara, K; Matsubayashi, Y; Yamamoto, M; Osawa, T; Ishizawa, M; Kaneko, M; Matsunaga, S; Kato, K; Seida, H; Yamanaka, N; Kodama, S; Sone, H

2017-12-01

This study aimed to examine the impact of obesity, as defined by body mass index (BMI), and a metabolically unhealthy phenotype on the development of coronary artery disease (CAD) according to glucose tolerance status. This population-based retrospective cohort study included 123,746 Japanese men aged 18-72years (normal glucose tolerance: 72,047; prediabetes: 39,633; diabetes: 12,066). Obesity was defined as a BMI≥25kg/m 2 . Metabolically unhealthy individuals were defined as those with one or more of the following conditions: hypertension, hypertriglyceridaemia and/or low HDL cholesterol. A Cox proportional hazards regression model identified variables related to CAD incidence. The prevalences of obese subjects with normal glucose tolerance, prediabetes and diabetes were 21%, 34% and 53%, whereas those for metabolically unhealthy people were 43%, 60% and 79%, respectively. Multivariate analysis showed that a metabolically unhealthy phenotype increases hazard ratios (HRs) for CAD compared with a metabolically healthy phenotype, regardless of glucose tolerance status (normal glucose tolerance: 1.98, 95% CI: 1.32-2.95; prediabetes: 2.91, 95% CI: 1.85-4.55; diabetes: 1.90, 95% CI: 1.18-3.06). HRs for CAD among metabolically unhealthy non-obese diabetes patients and obese diabetes patients with a metabolically unhealthy status were 6.14 (95% CI: 3.94-9.56) and 7.86 (95% CI: 5.21-11.9), respectively, compared with non-obese subjects with normal glucose tolerance and without a metabolically unhealthy status. A metabolically unhealthy state can associate with CAD independently of obesity across all glucose tolerance stages. Clinicians may need to consider those with at least one or more conditions indicating a metabolically unhealthy state as being at high risk for CAD regardless of glucose tolerance status. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

GridTool: A surface modeling and grid generation tool

NASA Technical Reports Server (NTRS)

Samareh-Abolhassani, Jamshid

1995-01-01

GridTool is designed around the concept that the surface grids are generated on a set of bi-linear patches. This type of grid generation is quite easy to implement, and it avoids the problems associated with complex CAD surface representations and associated surface parameterizations. However, the resulting surface grids are close to but not on the original CAD surfaces. This problem can be alleviated by projecting the resulting surface grids onto the original CAD surfaces. GridTool is designed primary for unstructured grid generation systems. Currently, GridTool supports VGRID and FELISA systems, and it can be easily extended to support other unstructured grid generation systems. The data in GridTool is stored parametrically so that once the problem is set up, one can modify the surfaces and the entire set of points, curves and patches will be updated automatically. This is very useful in a multidisciplinary design and optimization process. GridTool is written entirely in ANSI 'C', the interface is based on the FORMS library, and the graphics is based on the GL library. The code has been tested successfully on IRIS workstations running IRIX4.0 and above. The memory is allocated dynamically, therefore, memory size will depend on the complexity of geometry/grid. GridTool data structure is based on a link-list structure which allows the required memory to expand and contract dynamically according to the user's data size and action. Data structure contains several types of objects such as points, curves, patches, sources and surfaces. At any given time, there is always an active object which is drawn in magenta, or in their highlighted colors as defined by the resource file which will be discussed later.

Elevated Glucose Oxidation, Reduced Insulin Secretion, and a Fatty Heart May Be Protective Adaptions in Ischemic CAD.

PubMed

Hannukainen, J C; Lautamäki, R; Mari, A; Pärkkä, J P; Bucci, M; Guzzardi, M A; Kajander, S; Tuokkola, T; Knuuti, J; Iozzo, P

2016-07-01

Insulin resistance, β-cell dysfunction, and ectopic fat deposition have been implicated in the pathogenesis of coronary artery disease (CAD) and type 2 diabetes, which is common in CAD patients. We investigated whether CAD is an independent predictor of these metabolic abnormalities and whether this interaction is influenced by superimposed myocardial ischemia. We studied CAD patients with (n = 8) and without (n = 14) myocardial ischemia and eight non-CAD controls. Insulin sensitivity and secretion and substrate oxidation were measured during fasting and oral glucose tolerance testing. We used magnetic resonance imaging/spectroscopy, positron emission and computerized tomography to characterize CAD, cardiac function, pericardial and abdominal adipose tissue, and myocardial, liver, and pancreatic triglyceride contents. Ischemic CAD was characterized by elevated oxidative glucose metabolism and a proportional decline in β-cell insulin secretion and reduction in lipid oxidation. Cardiac function was preserved in CAD groups, whereas cardiac fat depots were elevated in ischemic CAD compared to non-CAD subjects. Liver and pancreatic fat contents were similar in all groups and related with surrounding adipose masses or systemic insulin sensitivity. In ischemic CAD patients, glucose oxidation is enhanced and correlates inversely with insulin secretion. This can be seen as a mechanism to prevent glucose lowering because glucose is required in oxygen-deprived tissues. On the other hand, the accumulation of cardiac triglycerides may be a physiological adaptation to the limited fatty acid oxidative capacity. Our results underscore the urgent need of clinical trials that define the optimal/safest glycemic range in situations of myocardial ischemia.

Elevated Glucose Oxidation, Reduced Insulin Secretion, and a Fatty Heart May Be Protective Adaptions in Ischemic CAD

PubMed Central

Hannukainen, J. C.; Lautamäki, R.; Mari, A.; Pärkkä, J. P.; Bucci, M.; Guzzardi, M. A.; Kajander, S.; Tuokkola, T.; Knuuti, J.

2016-01-01

Background: Insulin resistance, β-cell dysfunction, and ectopic fat deposition have been implicated in the pathogenesis of coronary artery disease (CAD) and type 2 diabetes, which is common in CAD patients. We investigated whether CAD is an independent predictor of these metabolic abnormalities and whether this interaction is influenced by superimposed myocardial ischemia. Methods and Results: We studied CAD patients with (n = 8) and without (n = 14) myocardial ischemia and eight non-CAD controls. Insulin sensitivity and secretion and substrate oxidation were measured during fasting and oral glucose tolerance testing. We used magnetic resonance imaging/spectroscopy, positron emission and computerized tomography to characterize CAD, cardiac function, pericardial and abdominal adipose tissue, and myocardial, liver, and pancreatic triglyceride contents. Ischemic CAD was characterized by elevated oxidative glucose metabolism and a proportional decline in β-cell insulin secretion and reduction in lipid oxidation. Cardiac function was preserved in CAD groups, whereas cardiac fat depots were elevated in ischemic CAD compared to non-CAD subjects. Liver and pancreatic fat contents were similar in all groups and related with surrounding adipose masses or systemic insulin sensitivity. Conclusions: In ischemic CAD patients, glucose oxidation is enhanced and correlates inversely with insulin secretion. This can be seen as a mechanism to prevent glucose lowering because glucose is required in oxygen-deprived tissues. On the other hand, the accumulation of cardiac triglycerides may be a physiological adaptation to the limited fatty acid oxidative capacity. Our results underscore the urgent need of clinical trials that define the optimal/safest glycemic range in situations of myocardial ischemia. PMID:27045985

Comparison between evaporative light scattering detection and charged aerosol detection for the analysis of saikosaponins.

PubMed

Eom, Han Young; Park, So-Young; Kim, Min Kyung; Suh, Joon Hyuk; Yeom, Hyesun; Min, Jung Won; Kim, Unyong; Lee, Jeongmi; Youm, Jeong-Rok; Han, Sang Beom

2010-06-25

Saikosaponins are triterpene saponins derived from the roots of Bupleurum falcatum L. (Umbelliferae), which has been traditionally used to treat fever, inflammation, liver diseases, and nephritis. It is difficult to analyze saikosaponins using HPLC-UV due to the lack of chromophores. Therefore, evaporative light scattering detection (ELSD) is used as a valuable alternative to UV detection. More recently, a charged aerosol detection (CAD) method has been developed to improve the sensitivity and reproducibility of ELSD. In this study, we compared CAD and ELSD methods in the simultaneous analysis of 10 saikosaponins, including saikosaponins-A, -B(1), -B(2), -B(3), -B(4), -C, -D, -G, -H and -I. A mixture of the 10 saikosaponins was injected into the Ascentis Express C18 column (100 mm x 4.6 mm, 2.7 microm) with gradient elution and detection with CAD and ELSD by splitting. We examined various factors that could affect the sensitivity of the detectors including various concentrations of additives, pH and flow rate of the mobile phase, purity of nitrogen gas and the CAD range. The sensitivity was determined based on the signal-to-noise ratio. The best sensitivity for CAD was achieved with 0.1 mM ammonium acetate at pH 4.0 in the mobile phase with a flow rate of 1.0 mL/min, and the CAD range at 100 pA, whereas that for ELSD was achieved with 0.01% acetic acid in the mobile phase with a flow rate at 0.8 mL/min. The purity of the nitrogen gas had only minor effects on the sensitivities of both detectors. Finally, the sensitivity for CAD was two to six times better than that of ELSD. Taken together, these results suggest that CAD provides a more sensitive analysis of the 10 saikosaponins than does ELSD. Copyright 2010 Elsevier B.V. All rights reserved.

Leucaena sp. recombinant cinnamyl alcohol dehydrogenase: purification and physicochemical characterization.

PubMed

Patel, Parth; Gupta, Neha; Gaikwad, Sushama; Agrawal, Dinesh C; Khan, Bashir M

2014-02-01

Cinnamyl alcohol dehydrogenase is a broad substrate specificity enzyme catalyzing the final step in monolignol biosynthesis, leading to lignin formation in plants. Here, we report characterization of a recombinant CAD homologue (LlCAD2) isolated from Leucaena leucocephala. LlCAD2 is 80 kDa homo-dimer associated with non-covalent interactions, having substrate preference toward sinapaldehyde with Kcat/Km of 11.6×10(6) (M(-1) s(-1)), and a possible involvement of histidine at the active site. The enzyme remains stable up to 40 °C, with the deactivation rate constant (Kd(*)) and half-life (t1/2) of 0.002 and 5h, respectively. LlCAD2 showed optimal activity at pH 6.5 and 9 for reduction and oxidation reactions, respectively, and was stable between pH 7 and 9, with the deactivation rate constant (Kd(*)) and half-life (t1/2) of 7.5×10(-4) and 15 h, respectively. It is a Zn-metalloenzyme with 4 Zn(2+) per dimer, however, was inhibited in presence of externally supplemented Zn(2+) ions. The enzyme was resistant to osmolytes, reducing agents and non-ionic detergents. Copyright © 2013 Elsevier B.V. All rights reserved.

Control of Randomly Sampled Robotic Systems

DTIC Science & Technology

1989-05-01

task is so cumbersome and complicated that we would not be able to do without lots of mistakes. To avoid this formidable business , a Lisp program is...Artificial Inteligence Laboratory, 1972. PumA26O.c Ned Mar 8 17:51:04 1989 1 #include <rnath.h> #define real float #define mm 6 #define G 9.83. #define M6

Usefulness of layer-specific strain for identifying complex CAD and predicting the severity of coronary lesions in patients with non-ST-segment elevation acute coronary syndrome: Compared with Syntax score.

PubMed

Zhang, Li; Wu, Wei-Chun; Ma, Hong; Wang, Hao

2016-11-15

Layer-specific strain allows the assessment of the function of every layer of myocardium. To evaluate the changes of non-ST-segment elevation acute coronary syndrome(NSTE-ACS) patients with and without complex coronary artery disease(CAD) by layer-specific strain and determine if myocardial strain can identify complex CAD and assess the severity of coronary lesions as defined by Syntax score (SS). A total of 139 patients undergoing coronary angiography due to suspected NSTE-ACS were prospectively enrolled. Echocardiography was performed 1h before angiography. Global longitudinal strain (GLS), territorial longitudinal strain (TLS), global circumferential strain (GCS) and territorial circumferential strain (TCS) of the three layers of LV wall were assessed by two-dimensional (2D) speckle tracking echocardiography (STE) with layer-specific myocardial deformation quantitative analysis based on the perfusion territories of the three major coronary arteries in an 18-segment model of LV. SS was used for predicting the severity of coronary lesions in patients with complex CAD. 78 had complex CAD, 32 had 1- or 2-vessel disease and 29 had no significant coronary stenosis confirmed by coronary angiography. According to SS value, 78 complex CAD subjects were subdivided into three groups, 24 in group SS 1 (SS≤22), 26 in group SS 2 (SS 23-32) and 28 in group SS 3 (SS≥33). Compared to the other two groups without complex CAD, patients with NSTE-ACS due to complex CAD had worse function in all 3 myocardial layers assessed by GLS, TLS, GCS and TCS. Endocardial GLS and TLS (all, P<0.01) were most affected. The absolute differences between endocardial and epicardial GLS and TLS were lower in magnitude in patients with complex CAD than in those without (all, P<0.001), and the more complex of coronary lesion, the lower magnitude of the parameters(all, P<0.001). Endocardial GLS and TLS were closely correlated with SS value(r=-0.751 and r=-0.753, respectively; P<0.001). By receiver-operating characteristic curve analysis, endocardial GLS and TLS demonstrated the highest area under curve, showing better diagnostic accuracy (endocardial GLS: value<-21.35% had 72% sensitivity, 84% specificity and area under the curve ¼0.846; endocardial TLS: value<-20.15% had 72% sensitivity, 88% specificity and area under the curve ¼0.852) than GCS, TCS, mid-myocardial and epicardial GLS, and TLS(all, P<0.05). Strains, particularly endocardial GLS and TLS measurement by 2DSTE might enable a non-invasive method to identify complex CAD and predict the severity of coronary lesions in patients with NSTE-ACS. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Plasma vaspin concentrations are decreased in acute coronary syndrome, but unchanged in patients without coronary lesions.

PubMed

Zhang, Baowei; Peng, Wenhui; Li, Hailing; Lu, Yuyan; Zhuang, Jianhui; Wang, Ke; Su, Yang; Xu, Yawei

2013-10-01

Previous studies suggested that decreased serum vaspin levels were associated with coronary artery disease (CAD). The present study aimed to investigate the association between plasma vaspin levels and different states of CAD. A total of 162 patients with coronary angiography (CAG) proved that CAD was enrolled. Additional 103 patients complained with "chest discomfort" with negative CAG, and 60 normal subjects were enrolled in this study. The levels of plasma vaspin, adiponectin, clinical parameters, lipid profile and C reactive protein (CRP) were measured. The levels of plasma vaspin were significantly lower in the CAD group (0.47±0.63 μg/L) than those in the healthy group and CAG (-) group (all p<0.001). In CAD group, the pos hoc analysis showed that serum vaspin concentration in acute myocardial infarction group (0.21±0.19 μg/L) was significantly lower than that in the unstable angina pectoris group (0.40±0.37 μg/L) (p=0.012), and serum vaspin concentration in unstable angina pectoris was significantly lower than that in stable angina pectoris group (0.92±0.94 μg/L) (p=0.013). The plasma vaspin concentration was also negatively correlated with the severity of CAD (1-vessel: 0.86±0.90 μg/L; 2-vessel: 0.36±0.39 μg/L; 3-vessel: 0.21±0.16 μg/L). The plasma vaspin concentration in CAG (-) group with "chest discomfort" (1.93±2.57 μg/L) was similar to the healthy control group (2.18±3.49μg/L). The plasma vaspin concentration correlated to the severity of CAD. Furthermore, plasma vaspin has a value of avoiding patients without CAD from unnecessary CAG. © 2013.

CAD Services: an Industry Standard Interface for Mechanical CAD Interoperability

NASA Technical Reports Server (NTRS)

Claus, Russell; Weitzer, Ilan

2002-01-01

Most organizations seek to design and develop new products in increasingly shorter time periods. At the same time, increased performance demands require a team-based multidisciplinary design process that may span several organizations. One approach to meet these demands is to use 'Geometry Centric' design. In this approach, design engineers team their efforts through one united representation of the design that is usually captured in a CAD system. Standards-based interfaces are critical to provide uniform, simple, distributed services that enable the 'Geometry Centric' design approach. This paper describes an industry-wide effort, under the Object Management Group's (OMG) Manufacturing Domain Task Force, to define interfaces that enable the interoperability of CAD, Computer Aided Manufacturing (CAM), and Computer Aided Engineering (CAE) tools. This critical link to enable 'Geometry Centric' design is called: Cad Services V1.0. This paper discusses the features of this standard and proposed application.

Clinical Courses of Graft Failure Caused by Chronic Allograft Dysfunction in Kidney Transplantation.

PubMed

Fujiwara, T; Teruta, S; Tsudaka, S; Ota, K; Matsuda, H

Chronic allograft dysfunction (CAD) is a main cause of graft failure in kidney transplantation. We retrospectively analyzed 279 kidney transplant recipients who survived with a functioning graft for at least 2 years. CAD was defined as chronic graft deterioration, excluding other specific causes. We defined the pattern of decline in estimated glomerular filtration rate (eGFR), as follows: (1) "plateau" was defined as decline in eGFR ≤2 mL/min/1.73 m 2 /year; "long plateaus" were those lasting more than 5 years; (2) "rapid decline" was a decrease in eGFR ≥20 mL/min/1.73 m 2 /year. Patients diagnosed with CAD were categorized according to the occurrence of rapid decline and/or long plateau as follows: group 1, neither rapid decline nor long plateau; group 2, rapid decline only; group 3, long plateau only; and group 4, both rapid decline and long plateau. From a total of 81 graft losses, 51 (63%) failed because of CAD, with a median of 9.4 years. Sixteen patients belonged to group 1, 14 to group 2, 12 to group 3, and nine to group 4. Mean graft survival times in the four groups were 7.7 ± 1.1, 6.1 ± 3.1, 16.2 ± 2.5, and 10.8 ± 3.6 years, respectively (P < .001). There were significant differences among groups in donor age, year of transplantation, mean eGFR at baseline, and acute rejection rate after transplantation. The results indicate that this cohort of kidney transplant recipients who had CAD comprised subgroups with different clinical courses. Copyright © 2016 Elsevier Inc. All rights reserved.

[Coloration of mica glass ceramic for use in dental CAD/CAM system].

PubMed

Sun, Ying; Wang, Zhong-yi; Tian, Jie-mo; Cao, Xiao-gang

2003-03-01

An intrinsically colored machinable glass-ceramic containing tetrasilicic fluormica as the predominant crystal phase was studied, which was used in molar crown in dental CAD/CAM system. Orthogonal design analysis was used to select appropriate base formula, coloration and heat treatment process. Factors influencing the color appearance of mica glass ceramic were nucleation agent and the ratio of Mg(2+) to K(+) in base formula; Cerium oxide (CeO(2)) was used as the main coloration; The preferred heat treatment was 650 degrees C for 1 h and 1,000 degrees C or 1,050 degrees C for 3 h - 4 h. This mica glass-ceramic could provide 4 to 5 color appearance for dental use, it showed excellent machinability which was eminently suitable for use in dental CAD/CAM system.

Standardized Outcome Measurement for Patients With Coronary Artery Disease: Consensus From the International Consortium for Health Outcomes Measurement (ICHOM).

PubMed

McNamara, Robert L; Spatz, Erica S; Kelley, Thomas A; Stowell, Caleb J; Beltrame, John; Heidenreich, Paul; Tresserras, Ricard; Jernberg, Tomas; Chua, Terrance; Morgan, Louise; Panigrahi, Bishnu; Rosas Ruiz, Alba; Rumsfeld, John S; Sadwin, Lawrence; Schoeberl, Mark; Shahian, David; Weston, Clive; Yeh, Robert; Lewin, Jack

2015-05-19

Coronary artery disease (CAD) outcomes consistently improve when they are routinely measured and provided back to physicians and hospitals. However, few centers around the world systematically track outcomes, and no global standards exist. Furthermore, patient-centered outcomes and longitudinal outcomes are under-represented in current assessments. The nonprofit International Consortium for Health Outcomes Measurement (ICHOM) convened an international Working Group to define a consensus standard set of outcome measures and risk factors for tracking, comparing, and improving the outcomes of CAD care. Members were drawn from 4 continents and 6 countries. Using a modified Delphi method, the ICHOM Working Group defined who should be tracked, what should be measured, and when such measurements should be performed. The ICHOM CAD consensus measures were designed to be relevant for all patients diagnosed with CAD, including those with acute myocardial infarction, angina, and asymptomatic CAD. Thirteen specific outcomes were chosen, including acute complications occurring within 30 days of acute myocardial infarction, coronary artery bypass grafting surgery, or percutaneous coronary intervention; and longitudinal outcomes for up to 5 years for patient-reported health status (Seattle Angina Questionnaire [SAQ-7], elements of Rose Dyspnea Score, and Patient Health Questionnaire [PHQ-2]), cardiovascular hospital admissions, cardiovascular procedures, renal failure, and mortality. Baseline demographic, cardiovascular disease, and comorbidity information is included to improve the interpretability of comparisons. ICHOM recommends that this set of outcomes and other patient information be measured for all patients with CAD. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Memotain: A CAD/CAM nickel-titanium lingual retainer.

PubMed

Kravitz, Neal D; Grauer, Dan; Schumacher, Pascal; Jo, Yong-Min

2017-04-01

Approximately 1/2 of maxillary and 1/5 of mandibular multi-stranded lingual retainers fail during retention in some form, either bond failure or wire breakage. Memotain is a new CAD/CAM fabricated lingual retainer wire made of custom-cut nickel-titanium, as an alternative to multi-stranded lingual retainers. It offers numerous perceived advantages to the traditional multi-stranded stainless steel wire, including precision fit, avoidance of interferences, corrosion resistance and even the potential for minor tooth movement as an active lingual retainer. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Validation of the association between a branched chain amino acid metabolite profile and extremes of coronary artery disease in patients referred for cardiac catheterization.

PubMed

Bhattacharya, Sayanti; Granger, Christopher B; Craig, Damian; Haynes, Carol; Bain, James; Stevens, Robert D; Hauser, Elizabeth R; Newgard, Christopher B; Kraus, William E; Newby, L Kristin; Shah, Svati H

2014-01-01

To validate independent associations between branched-chain amino acids (BCAA) and other metabolites with coronary artery disease (CAD). We conducted mass-spectrometry-based profiling of 63 metabolites in fasting plasma from 1983 sequential patients undergoing cardiac catheterization. Significant CAD was defined as CADindex ≥ 32 (at least one vessel with ≥ 95% stenosis; N = 995) and no CAD as CADindex ≤ 23 and no previous cardiac events (N = 610). Individuals (N = 378) with CAD severity between these extremes were excluded. Principal components analysis (PCA) reduced large numbers of correlated metabolites into uncorrelated factors. Association between metabolite factors and significant CAD vs. no CAD was tested using logistic regression; and between metabolite factors and severity of CAD was tested using linear regression. Of twelve PCA-derived metabolite factors, two were associated with CAD in multivariable models: factor 10, composed of BCAA (adjusted odds ratio, OR, 1.20; 95% CI 1.05-1.35, p = 0.005) and factor 7, composed of short-chain acylcarnitines, which include byproducts of BCAA metabolism (adjusted OR 1.30; 95% CI 1.14-1.48, p = 0.001). After adjustment for glycated albumin (marker of insulin resistance [IR]) both factors 7 (p = 0.0001) and 10 (p = 0.004) remained associated with CAD. Severity of CAD as a continuous variable (including patients with non-obstructive disease) was associated with metabolite factors 2, 3, 6, 7, 8 and 9; only factors 7 and 10 were associated in multivariable models. We validated the independent association of metabolites involved in BCAA metabolism with CAD extremes. These metabolites may be reporting on novel mechanisms of CAD pathogenesis that are independent of IR and diabetes. Copyright © 2013. Published by Elsevier Ireland Ltd.

Diagnostic yield and accuracy of coronary CT angiography after abnormal nuclear myocardial perfusion imaging.

PubMed

Meinel, Felix G; Schoepf, U Joseph; Townsend, Jacob C; Flowers, Brian A; Geyer, Lucas L; Ebersberger, Ullrich; Krazinski, Aleksander W; Kunz, Wolfgang G; Thierfelder, Kolja M; Baker, Deborah W; Khan, Ashan M; Fernandes, Valerian L; O'Brien, Terrence X

2018-06-15

We aimed to determine the diagnostic yield and accuracy of coronary CT angiography (CCTA) in patients referred for invasive coronary angiography (ICA) based on clinical concern for coronary artery disease (CAD) and an abnormal nuclear stress myocardial perfusion imaging (MPI) study. We enrolled 100 patients (84 male, mean age 59.6 ± 8.9 years) with an abnormal MPI study and subsequent referral for ICA. Each patient underwent CCTA prior to ICA. We analyzed the prevalence of potentially obstructive CAD (≥50% stenosis) on CCTA and calculated the diagnostic accuracy of ≥50% stenosis on CCTA for the detection of clinically significant CAD on ICA (defined as any ≥70% stenosis or ≥50% left main stenosis). On CCTA, 54 patients had at least one ≥50% stenosis. With ICA, 45 patients demonstrated clinically significant CAD. A positive CCTA had 100% sensitivity and 84% specificity with a 100% negative predictive value and 83% positive predictive value for clinically significant CAD on a per patient basis in MPI positive symptomatic patients. In conclusion, almost half (48%) of patients with suspected CAD and an abnormal MPI study demonstrate no obstructive CAD on CCTA.

Buying CAM.

ERIC Educational Resources Information Center

Meloy, Jim; And Others

1990-01-01

The relationship between computer-aided design (CAD), computer-aided manufacturing (CAM), and computer numerical control (CNC) computer applications is described. Tips for helping educate the CAM buyer on what to look for and what to avoid when searching for the most appropriate instructional CAM package are provided. (KR)

Atherosclerosis as a disease of failed endogenous repair

PubMed Central

Zenovich, Andrey G.; Taylor, Doris A.

2009-01-01

As coronary artery disease (CAD) continues to be the primary cause of mortality, a more in-depth understanding of pathophysiology and novel treatments are being sought. The past two decades have established inflammation as a driving force behind CAD – from endothelial dysfunction to heart failure. Recent advances in stem/progenitor cell biology have led to initial applications of progenitor cells in CAD continuum and have revealed that atherosclerosis is, at least in part, a disease of failed endogenous vascular repair. Several key progenitor cell populations including endothelial progenitor cells (AC133+/CD34+ population), vascular progenitors (CD31+/CD45low population), KDR+ cells and other bone marrow subtypes are mobilized for vascular repair. However, age and risk factors negatively impact these cells even prior to clinical CAD. Sex-based differences in progenitor cell capacity for repair have emerged as a new research focus that may offer mechanistic insights into clinical CAD discrepancies between men and women. Quantifying injury and cell-based repair and better defining their interactions should enable us to halt or even prevent CAD by enhancing the repair side of the repair/injury equation. PMID:18508460

Alternative diagnostic strategies for coronary artery disease in women: demonstration of the usefulness and efficiency of probability analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melin, J.A.; Wijns, W.; Vanbutsele, R.J.

Alternative strategies using conditional probability analysis for the diagnosis of coronary artery disease (CAD) were examined in 93 infarct-free women presenting with chest pain. Another group of 42 consecutive female patients was prospectively analyzed. For this latter group, the physician had access to the pretest and posttest probability of CAD before coronary angiography. These 135 women all underwent stress electrocardiographic, thallium scintigraphic, and coronary angiographic examination. The pretest and posttest probabilities of coronary disease were derived from a computerized Bayesian algorithm. Probability estimates were calculated by the four following hypothetical strategies: SO, in which history, including risk factors, was considered;more » S1, in which history and stress electrocardiographic results were considered; S2, in which history and stress electrocardiographic and stress thallium scintigraphic results were considered; and S3, in which history and stress electrocardiographic results were used, but in which stress scintigraphic results were considered only if the poststress probability of CAD was between 10% and 90%, i.e., if a sufficient level of diagnostic certainty could not be obtained with the electrocardiographic results alone. The strategies were compared with respect to accuracy with the coronary angiogram as the standard. For both groups of women, S2 and S3 were found to be the most accurate in predicting the presence or absence of coronary disease (p less than .05). However, it was found with use of S3 that more than one-third of the thallium scintigrams could have been avoided without loss of accuracy. It was also found that diagnostic catheterization performed to exclude CAD as a diagnosis could have been avoided in half of the patients without loss of accuracy.(ABSTRACT TRUNCATED AT 250 WORDS)« less

Adaptive match filter based method for time vs. amplitude characterization of microvolt ECG T-wave alternans.

PubMed

Burattini, Laura; Zareba, Wojciech; Burattini, Roberto

2008-09-01

To develop a new method for non-invasive identification of patients prone to ventricular tachyarrhythmia and sudden cardiac death, an adaptive match-filter (AMF) was applied to detect and characterize T-wave alternans (TWA) in 200 coronary artery diseased (CAD) patients compared with 176 healthy (H) subjects. TWA was characterized in terms of duration (TWAD), amplitude (TWAA), and magnitude (TWAM, defined as the product of TWAD times TWAA). A criterion derived from these parameters, estimated over the H-population, allowed discrimination between a risk (TWA+) and a normality (NO TWA) zone in the TWAD-TWAA plane. To gain further ability to discriminate among different risk levels, the TWA+ zone was divided into four sub-zones respectively characterized by low duration and low amplitude (LDLA), low duration and high amplitude (LDHA), high duration and low amplitude (HDLA), and high duration and high amplitude (HDHA). With our methodology, 21 CAD-patients (10.5%) were identified as TWA+, 9 falling in the LDLA zone, 4 in the HDLA, 7 in the LDHA, and 1 in the HDHA. These results are in agreement with clinical expectations and pave the way to further clinical follow-up studies finalized to analyze pathophysiological implications and risk factors associated to each TWA+ zone.

Association of circulating levels of nicotinamide phosphoribosyltransferase (NAMPT/Visfatin) and of a frequent polymorphism in the promoter of the NAMPT gene with coronary artery disease in diabetic and non-diabetic subjects

PubMed Central

2013-01-01

Background Nicotinamide phosphoribosyltransferase (NAMPT) is the limiting enzyme in one of pathways of synthesis of Nicotinamide Adenine Dinucleotide, a redox coenzyme. NAMPT is considered as an insulin-mimetic factor and a potential regulatory factor in inflammatory and immune processes. Associations of circulating NAMPT levels with cardiovascular disease (CVD) and insulin resistance have been reported. We investigated association of circulating NAMPT levels and the rs9770242 NAMPT gene polymorphism with coronary artery disease (CAD). Methods We studied 594 Brazilian subjects undergoing a coronary angiography (49% of whom had type 2 diabetes). CAD, defined as stenosis greater than 50% in one major coronary vessel or branch, was observed in 68% of subjects. Genetic studies were also performed in 858 North-American Non-Hispanic White subjects with type 2 diabetes (49% with CAD). Results We observed an interaction between glycemic and CAD status on the comparison of NAMPT levels by CAD status. NAMPT levels were higher in type 2 diabetic patients with CAD as compared to those without CAD: 5.27 ± 2.93 ng/ml vs. 4.43 ± 2.94 ng/ml, p = 0.006 (mean ± SD). NAMPT levels were not significantly different in non-diabetic subjects with or without CAD. The T-allele of rs9770242 was associated with CAD in the Brazilian cohort (OR 1.46, 95% CI 1.06 - 2.01, p = 0.02) while no association was observed in the North-American cohort. Conclusions Our data suggest that circulating NAMPT levels are associated with CAD in type 2 diabetic patients. NAMPT rs9770242 polymorphism may be associated with CAD in some populations. PMID:23968400

ProperCAD: A portable object-oriented parallel environment for VLSI CAD

NASA Technical Reports Server (NTRS)

Ramkumar, Balkrishna; Banerjee, Prithviraj

1993-01-01

Most parallel algorithms for VLSI CAD proposed to date have one important drawback: they work efficiently only on machines that they were designed for. As a result, algorithms designed to date are dependent on the architecture for which they are developed and do not port easily to other parallel architectures. A new project under way to address this problem is described. A Portable object-oriented parallel environment for CAD algorithms (ProperCAD) is being developed. The objectives of this research are (1) to develop new parallel algorithms that run in a portable object-oriented environment (CAD algorithms using a general purpose platform for portable parallel programming called CARM is being developed and a C++ environment that is truly object-oriented and specialized for CAD applications is also being developed); and (2) to design the parallel algorithms around a good sequential algorithm with a well-defined parallel-sequential interface (permitting the parallel algorithm to benefit from future developments in sequential algorithms). One CAD application that has been implemented as part of the ProperCAD project, flat VLSI circuit extraction, is described. The algorithm, its implementation, and its performance on a range of parallel machines are discussed in detail. It currently runs on an Encore Multimax, a Sequent Symmetry, Intel iPSC/2 and i860 hypercubes, a NCUBE 2 hypercube, and a network of Sun Sparc workstations. Performance data for other applications that were developed are provided: namely test pattern generation for sequential circuits, parallel logic synthesis, and standard cell placement.

Comparison of cellular location and expression of Plakophilin-2 in epidermal cells from nonlesional atopic skin and healthy skin in German shepherd dogs.

PubMed

Ardesjö-Lundgren, Brita; Tengvall, Katarina; Bergvall, Kerstin; Farias, Fabiana H G; Wang, Liya; Hedhammar, Åke; Lindblad-Toh, Kerstin; Andersson, Göran

2017-08-01

Canine atopic dermatitis (CAD) is an inflammatory and pruritic allergic skin disease caused by interactions between genetic and environmental factors. Previously, a genome-wide significant risk locus on canine chromosome 27 for CAD was identified in German shepherd dogs (GSDs) and Plakophilin-2 (PKP2) was defined as the top candidate gene. PKP2 constitutes a crucial component of desmosomes and also is important in signalling, metabolic and transcriptional activities. The main objective was to evaluate the role of PKP2 in CAD by investigating PKP2 expression and desmosome structure in nonlesional skin from CAD-affected (carrying the top GWAS SNP risk allele) and healthy GSDs. We also aimed at defining the cell types in the skin that express PKP2 and its intracellular location. Skin biopsies were collected from nine CAD-affected and five control GSDs. The biopsies were frozen for immunofluorescence and fixed for electron microscopy immunolabelling and morphology. We observed the novel finding of PKP2 expression in dendritic cells and T cells in dog skin. Moreover, we detected that PKP2 was more evenly expressed within keratinocytes compared to its desmosomal binding-partner plakoglobin. PKP2 protein was located in the nucleus and on keratin filaments attached to desmosomes. No difference in PKP2 abundance between CAD cases and controls was observed. Plakophilin-2 protein in dog skin is expressed in both epithelial and immune cells; based on its subcellular location its functional role is implicated in both nuclear and structural processes. © 2017 The Authors. Veterinary Dermatology published by John Wiley & Sons Ltd on behalf of the ESVD and ACVD.

Multicenter validation of the diagnostic accuracy of a blood-based gene expression test for assessing obstructive coronary artery disease in nondiabetic patients.

PubMed

Rosenberg, Steven; Elashoff, Michael R; Beineke, Philip; Daniels, Susan E; Wingrove, James A; Tingley, Whittemore G; Sager, Philip T; Sehnert, Amy J; Yau, May; Kraus, William E; Newby, L Kristin; Schwartz, Robert S; Voros, Szilard; Ellis, Stephen G; Tahirkheli, Naeem; Waksman, Ron; McPherson, John; Lansky, Alexandra; Winn, Mary E; Schork, Nicholas J; Topol, Eric J

2010-10-05

Diagnosing obstructive coronary artery disease (CAD) in at-risk patients can be challenging and typically requires both noninvasive imaging methods and coronary angiography, the gold standard. Previous studies have suggested that peripheral blood gene expression can indicate the presence of CAD. To validate a previously developed 23-gene, expression-based classification test for diagnosis of obstructive CAD in nondiabetic patients. Multicenter prospective trial with blood samples obtained before coronary angiography. (ClinicalTrials.gov registration number: NCT00500617) SETTING: 39 centers in the United States. An independent validation cohort of 526 nondiabetic patients with a clinical indication for coronary angiography. Receiver-operating characteristic (ROC) analysis of classifier score measured by real-time polymerase chain reaction, additivity to clinical factors, and reclassification of patient disease likelihood versus disease status defined by quantitative coronary angiography. Obstructive CAD was defined as 50% or greater stenosis in 1 or more major coronary arteries by quantitative coronary angiography. The area under the ROC curve (AUC) was 0.70 ± 0.02 (P < 0.001); the test added to clinical variables (Diamond-Forrester method) (AUC, 0.72 with the test vs. 0.66 without; P = 0.003) and added somewhat to an expanded clinical model (AUC, 0.745 with the test vs. 0.732 without; P = 0.089). The test improved net reclassification over both the Diamond-Forrester method and the expanded clinical model (P < 0.001). At a score threshold that corresponded to a 20% likelihood of obstructive CAD (14.75), the sensitivity and specificity were 85% and 43% (yielding a negative predictive value of 83% and a positive predictive value of 46%), with 33% of patient scores below this threshold. Patients with chronic inflammatory disorders, elevated levels of leukocytes or cardiac protein markers, or diabetes were excluded. A noninvasive whole-blood test based on gene expression and demographic characteristics may be useful for assessing obstructive CAD in nondiabetic patients without known CAD. CardioDx.

WE-E-217A-02: Methodologies for Evaluation of Standalone CAD System Performance.

PubMed

Sahiner, B

2012-06-01

Standalone performance evaluation of a CAD system provides information about the abnormality detection or classification performance of the computerized system alone. Although the performance of the reader with CAD is the final step in CAD system assessment, standalone performance evaluation is an important component for several reasons: First, standalone evaluation informs the reader about the performance level of the CAD system and may have an impact on how the reader uses the system. Second, it provides essential information to the system designer for algorithm optimization during system development. Third, standalone evaluation can provide a detailed description of algorithm performance (e.g., on subgroups of the population) because a larger data set with more samples from different subgroups can be included in standalone studies compared to reader studies. Proper standalone evaluation of a CAD system involves a number of key components, some of which are shared with the assessment of reader performance with CAD. These include (1) selection of a test data set that allows performance assessment with little or no bias and acceptable uncertainty; (2) a reference standard that indicates disease status as well as the location and extent of disease; (3) a clearly defined method for labeling each CAD mark as a true-positive or false-positive; and (4) a properly selected set of metrics to summarize the accuracy of the computer marks and their corresponding scores. In this lecture, we will discuss various approaches for the key components of standalone CAD performance evaluation listed above, and present some of the recommendations and opinions from the AAPM CAD subcommittee on these issues. Learning Objectives 1. Identify basic components and metrics in the assessment of standalone CAD systems 2. Understand how each component may affect the assessed performance 3. Learn about AAPM CAD subcommittee's opinions and recommendations on factors and metrics related to the evaluation of standalone CAD system performance. © 2012 American Association of Physicists in Medicine.

Coronary artery disease and the contours of pharmaceuticalization.

PubMed

Pollock, Anne; Jones, David S

2015-04-01

Coronary artery disease (CAD) has dominated mortality for most of the past century, not just in Europe and North America but worldwide. Treatments for CAD, both pharmaceutical and surgical, have become leading sectors of the healthcare economy. This paper focuses on the therapeutic landscape for CAD in the United States. We hope to add texture to the broader conversation of pharmaceuticalization explored in this issue by situating pharmaceutical therapies as just one element in the broader therapeutic terrain, alongside cardiac surgery and interventional cardiology. Patients with CAD must navigate a therapeutic landscape with three intersecting paths: lifestyle change, pharmaceuticals, and surgery. While pharmaceuticals are often seen as a quick fix, a way of avoiding more difficult lifestyle changes, it is surgery and angioplasty that promise patients the quickest fix of all. There also is another option, often overlooked by analysts but popular among physicians and patients: inaction. The U.S. context is often critiqued as a site of excessive treatment with respect to both drugs and procedures, and yet there is deep stratification within it--over-treatment in many populations and under-treatment in others. People who experience the serious risks of CAD do so in a racialized terrain of durable preoccupations with difference and unequal access to care. While the pharmaceuticalization literature disproportionately attends to lifestyle drugs, which some observers consider to be medically inappropriate or unnecessary, CAD does remain the leading cause of death. Thus, the stakes are high. Examination of the pharmaceuticalization of CAD in light of surgical treatments and racial disparities offers a window into the pervasiveness and persuasiveness of pharmaceuticals in an increasingly consumer-driven medicine, as well as the limits of their appeal and their reach. Copyright © 2014 Elsevier Ltd. All rights reserved.

Controllable Edge Feature Sharpening for Dental Applications

PubMed Central

2014-01-01

This paper presents a new approach to sharpen blurred edge features in scanned tooth preparation surfaces generated by structured-light scanners. It aims to efficiently enhance the edge features so that the embedded feature lines can be easily identified in dental CAD systems, and to avoid unnatural oversharpening geometry. We first separate the feature regions using graph-cut segmentation, which does not require a user-defined threshold. Then, we filter the face normal vectors to propagate the geometry from the smooth region to the feature region. In order to control the degree of the sharpness, we propose a feature distance measure which is based on normal tensor voting. Finally, the vertex positions are updated according to the modified face normal vectors. We have applied the approach to scanned tooth preparation models. The results show that the blurred edge features are enhanced without unnatural oversharpening geometry. PMID:24741376

Controllable edge feature sharpening for dental applications.

PubMed

Fan, Ran; Jin, Xiaogang

2014-01-01

This paper presents a new approach to sharpen blurred edge features in scanned tooth preparation surfaces generated by structured-light scanners. It aims to efficiently enhance the edge features so that the embedded feature lines can be easily identified in dental CAD systems, and to avoid unnatural oversharpening geometry. We first separate the feature regions using graph-cut segmentation, which does not require a user-defined threshold. Then, we filter the face normal vectors to propagate the geometry from the smooth region to the feature region. In order to control the degree of the sharpness, we propose a feature distance measure which is based on normal tensor voting. Finally, the vertex positions are updated according to the modified face normal vectors. We have applied the approach to scanned tooth preparation models. The results show that the blurred edge features are enhanced without unnatural oversharpening geometry.

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins.

PubMed

Kim, Hoon; Ralph, John; Lu, Fachuang; Ralph, Sally A; Boudet, Alain M; MacKay, John J; Sederoff, Ronald R; Ito, Takashi; Kawai, Shingo; Ohashi, Hideo; Higuchi, Takayoshi

2003-01-21

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.

Nonobstructive coronary artery disease and risk of myocardial infarction.

PubMed

Maddox, Thomas M; Stanislawski, Maggie A; Grunwald, Gary K; Bradley, Steven M; Ho, P Michael; Tsai, Thomas T; Patel, Manesh R; Sandhu, Amneet; Valle, Javier; Magid, David J; Leon, Benjamin; Bhatt, Deepak L; Fihn, Stephan D; Rumsfeld, John S

2014-11-05

Little is known about cardiac adverse events among patients with nonobstructive coronary artery disease (CAD). To compare myocardial infarction (MI) and mortality rates between patients with nonobstructive CAD, obstructive CAD, and no apparent CAD in a national cohort. Retrospective cohort study of all US veterans undergoing elective coronary angiography for CAD between October 2007 and September 2012 in the Veterans Affairs health care system. Patients with prior CAD events were excluded. Angiographic CAD extent, defined by degree (no apparent CAD: no stenosis >20%; nonobstructive CAD: ≥1 stenosis ≥20% but no stenosis ≥70%; obstructive CAD: any stenosis ≥70% or left main [LM] stenosis ≥50%) and distribution (1, 2, or 3 vessel). The primary outcome was 1-year hospitalization for nonfatal MI after the index angiography. Secondary outcomes included 1-year all-cause mortality and combined 1-year MI and mortality. Among 37,674 patients, 8384 patients (22.3%) had nonobstructive CAD and 20,899 patients (55.4%) had obstructive CAD. Within 1 year, 845 patients died and 385 were rehospitalized for MI. Among patients with no apparent CAD, the 1-year MI rate was 0.11% (n = 8, 95% CI, 0.10%-0.20%) and increased progressively by 1-vessel nonobstructive CAD, 0.24% (n = 10, 95% CI, 0.10%-0.40%); 2-vessel nonobstructive CAD, 0.56% (n = 13, 95% CI, 0.30%-1.00%); 3-vessel nonobstructive CAD, 0.59% (n = 6, 95% CI, 0.30%-1.30%); 1-vessel obstructive CAD, 1.18% (n = 101, 95% CI, 1.00%-1.40%); 2-vessel obstructive CAD, 2.18% (n = 110, 95% CI, 1.80%-2.60%); and 3-vessel or LM obstructive CAD, 2.47% (n = 137, 95% CI, 2.10%-2.90%). After adjustment, 1-year MI rates increased with increasing CAD extent. Relative to patients with no apparent CAD, patients with 1-vessel nonobstructive CAD had a hazard ratio (HR) for 1-year MI of 2.0 (95% CI, 0.8-5.1); 2-vessel nonobstructive HR, 4.6 (95% CI, 2.0-10.5); 3-vessel nonobstructive HR, 4.5 (95% CI, 1.6-12.5); 1-vessel obstructive HR, 9.0 (95% CI, 4.2-19.0); 2-vessel obstructive HR, 16.5 (95% CI, 8.1-33.7); and 3-vessel or LM obstructive HR, 19.5 (95% CI, 9.9-38.2). One-year mortality rates were associated with increasing CAD extent, ranging from 1.38% among patients without apparent CAD to 4.30% with 3-vessel or LM obstructive CAD. After risk adjustment, there was no significant association between 1- or 2-vessel nonobstructive CAD and mortality, but there were significant associations with mortality for 3-vessel nonobstructive CAD (HR, 1.6; 95% CI, 1.1-2.5), 1-vessel obstructive CAD (HR, 1.9; 95% CI, 1.4-2.6), 2-vessel obstructive CAD (HR, 2.8; 95% CI, 2.1-3.7), and 3-vessel or LM obstructive CAD (HR, 3.4; 95% CI, 2.6-4.4). Similar associations were noted with the combined outcome. In this cohort of patients undergoing elective coronary angiography, nonobstructive CAD, compared with no apparent CAD, was associated with a significantly greater 1-year risk of MI and all-cause mortality. These findings suggest clinical importance of nonobstructive CAD and warrant further investigation of interventions to improve outcomes among these patients.

Mitochondrial reactive oxygen species enhance AMP-activated protein kinase activation in the endothelium of patients with coronary artery disease and diabetes.

PubMed

Mackenzie, Ruth M; Salt, Ian P; Miller, William H; Logan, Angela; Ibrahim, Hagar A; Degasperi, Andrea; Dymott, Jane A; Hamilton, Carlene A; Murphy, Michael P; Delles, Christian; Dominiczak, Anna F

2013-03-01

The aim of the present study was to determine whether the endothelial dysfunction associated with CAD (coronary artery disease) and T2D (Type 2 diabetes mellitus) is concomitant with elevated mtROS (mitochondrial reactive oxygen species) production in the endothelium and establish if this, in turn, regulates the activity of endothelial AMPK (AMP-activated protein kinase). We investigated endothelial function, mtROS production and AMPK activation in saphenous veins from patients with advanced CAD. Endothelium-dependent vasodilation was impaired in patients with CAD and T2D relative to those with CAD alone. Levels of mitochondrial H(2)O(2) and activity of AMPK were significantly elevated in primary HSVECs (human saphenous vein endothelial cells) from patients with CAD and T2D compared with those from patients with CAD alone. Incubation with the mitochondria-targeted antioxidant, MitoQ(10) significantly reduced AMPK activity in HSVECs from patients with CAD and T2D but not in cells from patients with CAD alone. Elevated mtROS production in the endothelium of patients with CAD and T2D increases AMPK activation, supporting a role for the kinase in defence against oxidative stress. Further investigation is required to determine whether pharmacological activators of AMPK will prove beneficial in the attenuation of endothelial dysfunction in patients with CAD and T2D.

Computer-Aided Diagnosis Based on Convolutional Neural Network System for Colorectal Polyp Classification: Preliminary Experience.

PubMed

Komeda, Yoriaki; Handa, Hisashi; Watanabe, Tomohiro; Nomura, Takanobu; Kitahashi, Misaki; Sakurai, Toshiharu; Okamoto, Ayana; Minami, Tomohiro; Kono, Masashi; Arizumi, Tadaaki; Takenaka, Mamoru; Hagiwara, Satoru; Matsui, Shigenaga; Nishida, Naoshi; Kashida, Hiroshi; Kudo, Masatoshi

2017-01-01

Computer-aided diagnosis (CAD) is becoming a next-generation tool for the diagnosis of human disease. CAD for colon polyps has been suggested as a particularly useful tool for trainee colonoscopists, as the use of a CAD system avoids the complications associated with endoscopic resections. In addition to conventional CAD, a convolutional neural network (CNN) system utilizing artificial intelligence (AI) has been developing rapidly over the past 5 years. We attempted to generate a unique CNN-CAD system with an AI function that studied endoscopic images extracted from movies obtained with colonoscopes used in routine examinations. Here, we report our preliminary results of this novel CNN-CAD system for the diagnosis of colon polyps. A total of 1,200 images from cases of colonoscopy performed between January 2010 and December 2016 at Kindai University Hospital were used. These images were extracted from the video of actual endoscopic examinations. Additional video images from 10 cases of unlearned processes were retrospectively assessed in a pilot study. They were simply diagnosed as either an adenomatous or nonadenomatous polyp. The number of images used by AI to learn to distinguish adenomatous from nonadenomatous was 1,200:600. These images were extracted from the videos of actual endoscopic examinations. The size of each image was adjusted to 256 × 256 pixels. A 10-hold cross-validation was carried out. The accuracy of the 10-hold cross-validation is 0.751, where the accuracy is the ratio of the number of correct answers over the number of all the answers produced by the CNN. The decisions by the CNN were correct in 7 of 10 cases. A CNN-CAD system using routine colonoscopy might be useful for the rapid diagnosis of colorectal polyp classification. Further prospective studies in an in vivo setting are required to confirm the effectiveness of a CNN-CAD system in routine colonoscopy. © 2017 S. Karger AG, Basel.

Diagnostic Accuracy of CT Coronary Angiography According to Pretest Probability of Coronary Artery Disease and Severity of Coronary Arterial Calcification: The CorE-64 International, Multicenter Study

PubMed Central

Arbab-Zadeh, Armin; Miller, Julie M; Rochitte, Carlos E; Dewey, Marc; Niinuma, Hiroyuki; Gottlieb, Ilan; Paul, Narinder; Clouse, Melvin E.; Shapiro, Edward P.; Hoe, John; Lardo, Albert C.; Bush, David E.; de Roos, Albert; Cox, Christopher; Brinker, Jeffrey; Lima, Joăo A. C.

2012-01-01

Objectives Assess the impact of patient population characteristics on accuracy by CT angiography (CTA) to detect obstructive coronary artery disease (CAD). Background The ability of CTA to exclude obstructive CAD in patients of different pretest probabilities and in presence of coronary calcification remains uncertain. Methods For the CorE-64 study 371 patients underwent CTA and cardiac catheterization for the detection of obstructive CAD defined as 50% or greater luminal stenosis by quantitative coronary angiography (QCA). This analysis includes 80 initially excluded patients with a calcium score ≥ 600. Area under the receiver-operating-characteristics curve (AUC) was used to evaluate CTA diagnostic accuracy compared to QCA in patients according to calcium score and pretest probability of CAD. Results Analysis of patient-based quantitative CTA accuracy revealed an AUC of 0.93 (95% confidence interval [CI] 0.90-0.95). AUC remained 0.93 (0.90-0.96) after excluding patients with known CAD but decreased to 0.81 (0.71-0.89) in patients with calcium score ≥ 600 (p=0.077). While AUC were similar (0.93, 0.92, and 0.93, respectively) for patients with intermediate, high pretest probability for CAD, and known CAD, negative predictive values were different: 0.90, 0.83, and 0.50, respectively. Negative predictive values decreased from 0.93 to 0.75 for patients with calcium score < or ≥ 100, respectively (p= 0.053). Conclusions Both pretest probability for CAD and coronary calcium scoring should be considered before using CTA for excluding obstructive CAD. CTA is less effective for this purpose in patients with calcium score ≥ 600 and in patients with a high pretest probability for obstructive CAD. PMID:22261160

Coronary artery atherosclerosis and risk stratification in young adults with an intermediate pretest likelihood detected by multidetector computed tomography.

PubMed

Hou, Zhi-hui; Lu, Bin; Gao, Yang; Yu, Fang-fang; Cao, Hui-li; Jiang, Shi-liang; Roy, Sion K; Budoff, Matthew J

2012-11-01

To document the prevalence of coronary artery disease (CAD) and major adverse cardiac events (MACE) in patients younger than 45 years of age with intermediate pretest likelihood of CAD, and to determine whether coronary computed tomography angiography (cCTA) is useful for risk stratification of this cohort. We followed 452 intermediate pretest likelihood (according to Diamond and Forrester) outpatients who were suspected of CAD and underwent cCTA. They were all younger than 45 years old. The endpoint was MACE, defined as composite cardiac death, nonfatal myocardial infarction, or coronary revascularization. Follow-up was completed in 427 patients (94.5%) with a median follow-up period of 1081 days. No plaque was noted in 357 (83.6%) patients. Nonsignificant CAD was noted in 33 (7.7%) individuals and 37 (8.7%) patients with significant CAD. At the end of the follow-up period, 12 (2.8%) patients experienced MACE. The annualized event rate was 0.2% in patients with no plaque, 2.0% in patients with nonsignificant CAD, and 7.3% in patients with significant CAD. Hypertension, smoking, and significant CAD in cCTA were significant predictors of MACE in univariate analysis. Moreover, cCTA remained a predictor (P < .001) of events after multivariate correction (hazard ratio: 8.345, 95% CI: 3.438-17.823, P < .001). The prevalence of CAD and MACE in young adults with an intermediate pretest likelihood of CAD was considerable. cCTA is effective in restratifying patients into either a low or high posttest risk group. These results further emphasize the usefulness of cCTA in this cohort. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

Pre-test probability of obstructive coronary stenosis in patients undergoing coronary CT angiography: Comparative performance of the modified diamond-Forrester algorithm versus methods incorporating cardiovascular risk factors.

PubMed

Ferreira, António Miguel; Marques, Hugo; Tralhão, António; Santos, Miguel Borges; Santos, Ana Rita; Cardoso, Gonçalo; Dores, Hélder; Carvalho, Maria Salomé; Madeira, Sérgio; Machado, Francisco Pereira; Cardim, Nuno; de Araújo Gonçalves, Pedro

2016-11-01

Current guidelines recommend the use of the Modified Diamond-Forrester (MDF) method to assess the pre-test likelihood of obstructive coronary artery disease (CAD). We aimed to compare the performance of the MDF method with two contemporary algorithms derived from multicenter trials that additionally incorporate cardiovascular risk factors: the calculator-based 'CAD Consortium 2' method, and the integer-based CONFIRM score. We assessed 1069 consecutive patients without known CAD undergoing coronary CT angiography (CCTA) for stable chest pain. Obstructive CAD was defined as the presence of coronary stenosis ≥50% on 64-slice dual-source CT. The three methods were assessed for calibration, discrimination, net reclassification, and changes in proposed downstream testing based upon calculated pre-test likelihoods. The observed prevalence of obstructive CAD was 13.8% (n=147). Overestimations of the likelihood of obstructive CAD were 140.1%, 9.8%, and 18.8%, respectively, for the MDF, CAD Consortium 2 and CONFIRM methods. The CAD Consortium 2 showed greater discriminative power than the MDF method, with a C-statistic of 0.73 vs. 0.70 (p<0.001), while the CONFIRM score did not (C-statistic 0.71, p=0.492). Reclassification of pre-test likelihood using the 'CAD Consortium 2' or CONFIRM scores resulted in a net reclassification improvement of 0.19 and 0.18, respectively, which would change the diagnostic strategy in approximately half of the patients. Newer risk factor-encompassing models allow for a more precise estimation of pre-test probabilities of obstructive CAD than the guideline-recommended MDF method. Adoption of these scores may improve disease prediction and change the diagnostic pathway in a significant proportion of patients. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Prevalence of colorectal neoplasm among patients with newly diagnosed coronary artery disease.

PubMed

Chan, Annie On On; Jim, Man Hong; Lam, Kwok Fai; Morris, Jeffrey S; Siu, David Chun Wah; Tong, Teresa; Ng, Fook Hong; Wong, Siu Yin; Hui, Wai Mo; Chan, Chi Kuen; Lai, Kam Chuen; Cheung, Ting Kin; Chan, Pierre; Wong, Grace; Yuen, Man Fung; Lau, Yuk Kong; Lee, Stephen; Szeto, Ming Leung; Wong, Benjamin C Y; Lam, Shiu Kum

2007-09-26

Colorectal neoplasm and coronary artery disease (CAD) share similar risk factors, and their co-occurrence may be associated. To investigate the prevalence of colorectal neoplasm in patients with CAD in a cross-sectional study and to identify the predisposing factors for the association of the 2 diseases. Patients in Hong Kong, China, were recruited for screening colonoscopy after undergoing coronary angiography for suspected CAD during November 2004 to June 2006. Presence of CAD (n = 206) was defined as at least 50% diameter stenosis in any 1 of the major coronary arteries; otherwise, patients were considered CAD-negative (n = 208). An age- and sex-matched control group was recruited from the general population (n = 207). Patients were excluded for use of aspirin or statins, personal history of colonic disease, or colonoscopy in the past 10 years. The prevalence of colorectal neoplasm in CAD-positive, CAD-negative, and general population participants was determined. Bivariate logistic regression was performed to study the association between colorectal neoplasm and CAD and to identify risk factors for the association of the 2 diseases after adjusting for age and sex. The prevalence of colorectal neoplasm in the CAD-positive, CAD-negative, and general population groups was 34.0%, 18.8%, and 20.8% (P < .001 by chi2 test), prevalence of advanced lesions was 18.4%, 8.7%, and 5.8% (P < .001), and prevalence of cancer was 4.4%, 0.5%, and 1.4% (P = .02), respectively. Fifty percent of the cancers in CAD-positive participants were early stage. After adjusting for age and sex, an association still existed between colorectal neoplasm and presence of CAD (odds ratio [OR], 1.88; 95% confidence interval [CI], 1.25-2.70; P = .002) and between advanced lesions and presence of CAD (OR, 2.51; 95% CI, 1.43-4.35; P = .001). The metabolic syndrome (OR, 5.99; 95% CI, 1.43-27.94; P = .02) and history of smoking (OR, 4.74; 95% CI, 1.38-18.92; P = .02) were independent factors for the association of advanced colonic lesions and CAD. In this study population undergoing coronary angiography, the prevalence of colorectal neoplasm was greater in patients with CAD. The association between the presence of advanced colonic lesions and CAD was stronger in persons with the metabolic syndrome and a history of smoking.

SEM evaluation of human gingival fibroblasts growth onto CAD/CAM zirconia and veneering ceramic for zirconia

PubMed Central

Zizzari, Vincenzo; Borelli, Bruna; De Colli, Marianna; Tumedei, Margherita; Di Iorio, Donato; Zara, Susi; Sorrentino, Roberto; Cataldi, Amelia; Gherlone, Enrico Felice; Zarone, Fernando; Tetè, Stefano

2013-01-01

Summary Aim To evaluate the growth of Human Gingival Fibroblasts (HGFs) cultured onto sample discs of CAD/CAM zirconia and veneering ceramic for zirconia by means of Scanning Electron Microscope (SEM) analysis at different experimental times. Methods A total of 26 experimental discs, divided into 2 groups, were used: Group A) CAD/CAM zirconia (3Y-TZP) discs (n=13); Group B) veneering ceramic for zirconia discs (n=13). HGFs were obtained from human gingival biopsies, isolated and placed in culture plates. Subsequently, cells were seeded on experimental discs at 7,5×103/cm2 concentration and cultured for a total of 7 days. Discs were processed for SEM observation at 3h, 24h, 72h and 7 days. Results In Group A, after 3h, HGFs were adherent to the surface and showed a flattened profile. The disc surface covered by HGFs resulted to be wider in Group A than in Group B samples. At SEM observation, after 24h and 72h, differences in cell attachment were slightly noticeable between the groups, with an evident flattening of HGFs on both surfaces. All differences between Group A and group B became less significant after 7 days of culture in vitro. Conclusions SEM analysis of HGFs showed differences in terms of cell adhesion and proliferation, especially in the early hours of culture. Results showed a better adhesion and cell growth in Group A than in Group B, especially up to 72h in vitro. Differences decreased after 7 days, probably because of the rougher surface of CAD/CAM zirconia, promoting better cell adhesion, compared to the smoother surface of veneering ceramic. PMID:24611089

Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites.

PubMed

Stawarczyk, Bogna; Liebermann, Anja; Eichberger, Marlis; Güth, Jan-Frederik

2015-03-01

To determine the mechanical and optical properties of CAD/CAM composites (LAVA Ultimate, Cerasmart, Shofu Block and two exp. CAD/CAM composites), a hybrid material (VITA Enamic), a leucite (IPS Empress CAD) and a lithium disilicate glass-ceramic (IPS e.max CAD). Three-point flexural strength (FS) was investigated according ISO 6872:2008 (N=240/n=30). Two-body wear (TBW) was analyzed in a chewing simulator (1,200,000 cycles, 50N, 5°/55°C) using human teeth as antagonists (N=120/n=15). Quantitative analysis of wear was carried out with a 3D-scanner and associated matching software. Discoloration rate (DR) after 14 days of storage in cress, curry, red wine, and distilled water (N=384/n=12), and translucency (T) (N=384/n=48) of CAD/CAM materials were measured in a spectrophotometer (400-700nm wavelength). Data were analyzed using two-/one-way ANOVA with Scheffé post-hoc test, Kruskal-Wallis-H test, and linear mixed models (α=0.05). IPS e.max CAD showed the highest FS (p<0.001), followed by LAVA Ultimate; however, not different from the remaining CAD/CAM composites (exception: Shofu Block). The lowest FS showed VITA Enamic and IPS Empress CAD (p<0.001). IPS Empress CAD, VITA Enamic, exp. CAD/CAM composite 2, followed by IPS e.max presented lower material TBW than the remaining CAD/CAM materials (p<0.001). The highest antagonist wear was observed for the tested glass-ceramics and the hybrid material (p<0.001). Storage medium (red wine>curry>cress>distilled water) exerted the highest influence on DR (p<0.001), closely followed by CAD/CAM material. Glass-ceramics showed lower DR than CAD/CAM composites (p<0.001). CAD/CAM composites presented moderate FS, high T and antagonist friendly behavior. Glass-ceramic demonstrated the most favorable DR and lowest TBW on the material side. Copyright © 2015 Elsevier Ltd. All rights reserved.

Purification and characterization of cinnamyl alcohol-NADPH-dehydrogenase from the leaf tissues of a basin mangrove Lumnitzera racemosa Willd.

PubMed

Murugan, K; Arunkumar, N S; Mohankumar, C

2004-01-01

Cinnamyl alcohol-NADPH-dehydrogenase (CAD), the marker enzyme of lignin biosynthesis was purified from the leaf tissues of a basin mangrove Lumnitzera racemosa by ammonium sulphate precipitation, followed by anion-exchange, gel filtration and affinity chromatography. The molecular mass of the CAD enzyme was determined as 89 kDa, by size elution chromatography. SDS-PAGE of CAD revealed two closely associated bands of 45 kDa and 42 kDa as heterogenous subunits. The optimum pH of CAD was found to be 4.0. Km for the substrates cinnamaldehyde, coniferaldehyde and sinapaldehyde was determined. Cinnamaldehyde showed higher Km value than sinapaldehyde and coniferaldehyde. The correlation of activity of CAD with the amount of lignin was found less significant in L. racemosa, compared to plant species of other habitats viz., mesophytes, xerophytes and hydrophytes, suggesting that CAD possibly exhibits physiological suppression due to the saline habitat of the plant.

Reassigning the CaH+ 11Σ → 21Σ vibronic transition with CaD+

NASA Astrophysics Data System (ADS)

Condoluci, J.; Janardan, S.; Calvin, A. T.; Rugango, R.; Shu, G.; Sherrill, C. D.; Brown, K. R.

2017-12-01

We observe vibronic transitions in CaD+ between the 11Σ and 21Σ electronic states by resonance enhanced multiphoton photodissociation spectroscopy in a Coulomb crystal. The vibronic transitions are compared with previous measurements on CaH+. The result is a revised assignment of the CaH+ vibronic levels and a disagreement with multi-state-complete-active-space second-order perturbation theory theoretical calculations by approximately 700 cm-1. Updated high-level coupled-cluster calculations that include core-valence correlations reduce the disagreement between theory and experiment to 300 cm-1.

Dental biomaterials for chairside CAD/CAM: State of the art

PubMed Central

2017-01-01

The wide use of chairside CAD/CAM restorations has increased the diversity of the restorative material. For the practitioner, the selection of the appropriate material is difficult amongst the variety offered by the market. Information on the characteristics of the products can be difficult to assess due to the lack of up-to-date classification and the lack of reliability of manufacturer's advertising. The purpose of this article is to structure the data on restorative materials provided by various sources in order for the practitioner to choose the product most suited to the clinical situation. The objective is to classify chairside CAD/CAM materials and to define their characteristics and indications. PMID:29279770

Usefulness of coronary calcium scoring to myocardial perfusion SPECT in the diagnosis of coronary artery disease in a predominantly high risk population.

PubMed

Schaap, Jeroen; Kauling, Robert M; Boekholdt, S Matthijs; Post, Martijn C; Van der Heyden, Jan A; de Kroon, Thom L; van Es, H Wouter; Rensing, Benno J W M; Verzijlbergen, J Fred

2013-03-01

Coronary calcium scoring (CCS) adds to the diagnostic performance of myocardial perfusion single-photon emission computed tomography (SPECT) to assess the presence of significant coronary artery disease (CAD). Patients with a high pre-test likelihood are expected to have a high CCS which potentially could enhance the diagnostic performance of myocardial perfusion SPECT in this specific patient group. We evaluated the added value of CCS to SPECT in the diagnosis of significant CAD in patients with an intermediate to high pre-test likelihood. In total, 129 patients (mean age 62.7 ± 9.7 years, 65 % male) with stable anginal complaints and intermediate to high pre-test likelihood of CAD (median 87 %, range 22-95) were prospectively included in this study. All patients received SPECT and CCS imaging preceding invasive coronary angiography (CA). Fractional flow reserve (FFR) measurements were acquired from patients with angiographically estimated 50-95 % obstructive CAD. For SPECT a SSS > 3 was defined significant CAD. For CCS the optimal cut-off value for significant CAD was determined by ROC curve analysis. The reference standard for significant CAD was a FFR of <0.80 acquired by CA. Significant CAD was demonstrated in 64 patients (49.6 %). Optimal CCS cut-off value for significant CAD was >182.5. ROC curve analysis for prediction of the presence of significant CAD for SPECT, CCS and the combination of CCS and SPECT resulted in an area under the curve (AUC) of 0.88 (95 % CI 81-94), 0.75 (95 % CI 66-83 %) and 0.92 (95 % CI 87-97 %) respectively. The difference of the AUC between SPECT and the combination of CCS and SPECT was 0.05 (P = 0.12). The addition of CCS did not significantly improve the diagnostic performance of SPECT in the evaluation of patients with a predominantly high pre-test likelihood of CAD.

Apixaban in patients with atrial fibrillation and prior coronary artery disease: insights from the ARISTOTLE trial.

PubMed

Bahit, Maria Cecilia; Lopes, Renato D; Wojdyla, Daniel M; Hohnloser, Stefan H; Alexander, John H; Lewis, Basil S; Aylward, Philip E; Verheugt, Freek W A; Keltai, Matyas; Diaz, Rafael; Hanna, Michael; Granger, Christopher B; Wallentin, Lars

2013-12-10

A substantial portion of patients with atrial fibrillation (AF) also have coronary artery disease (CAD) and are at risk for coronary events. Warfarin is known to reduce these events, but increase the risk of bleeding. We assessed the effects of apixaban compared with warfarin in AF patients with and without prior CAD. In ARISTOTLE, 18,201 patients with AF were randomized to apixaban or warfarin. History of CAD was defined as documented CAD, prior myocardial infarction, and/or history of coronary revascularization. We analyzed baseline characteristics and clinical outcomes of patients with and without prior CAD and compared outcomes by randomized treatment using Cox models. A total of 6639 (36.5%) patients had prior CAD. These patients were more often male, more likely to have prior stroke, diabetes, and hypertension, and more often received aspirin at baseline (42.2% vs. 24.5%). The effects of apixaban were similar among patients with and without prior CAD on reducing stroke or systemic embolism and death from any cause (hazard ratio [HR] 0.95, 95% confidence interval [CI] 0.71-1.27, P for interaction=0.12; HR 0.96, 95% CI 0.81-1.13, P for interaction=0.28). Rates of myocardial infarction were numerically lower with apixaban than warfarin among patients with and without prior CAD. The effect of apixaban on reducing major bleeding and intracranial hemorrhage was consistent in patients with and without CAD. In patients with AF, apixaban more often prevented stroke or systemic embolism and death and caused less bleeding than warfarin, regardless of the presence of prior CAD. Given the common occurrence of AF and CAD and the higher rates of cardiovascular events and death, our results indicate that apixaban may be a better treatment option than warfarin for these high-risk patients. © 2013.

Treatment of Severely Resorbed Maxilla Due to Peri-Implantitis by Guided Bone Regeneration Using a Customized Allogenic Bone Block: A Case Report

PubMed Central

Blume, Oliver; Hoffmann, Lisa; Donkiewicz, Phil; Wenisch, Sabine; Back, Michael; Franke, Jörg; Schnettler, Reinhard

2017-01-01

The objective of this case report is to introduce a customized CAD/CAM freeze-dried bone allograft (FDBA) block for its use in Guided Bone Regeneration (GBR) procedures for severely deficient maxillary bones. Additionally, a special newly developed remote incision technique is presented to avoid wound dehiscence. The results show optimal integration behavior of the FDBA block after six months and the formation of new vital bone. Thus, the results of the present case report confirm the use of the customized CAD/CAM bone block for augmentation of complex defects in the maxillary aesthetic zone as a successful treatment concept. PMID:29065477

Treatment of Severely Resorbed Maxilla Due to Peri-Implantitis by Guided Bone Regeneration Using a Customized Allogenic Bone Block: A Case Report.

PubMed

Blume, Oliver; Hoffmann, Lisa; Donkiewicz, Phil; Wenisch, Sabine; Back, Michael; Franke, Jörg; Schnettler, Reinhard; Barbeck, Mike

2017-10-21

The objective of this case report is to introduce a customized CAD/CAM freeze-dried bone allograft (FDBA) block for its use in Guided Bone Regeneration (GBR) procedures for severely deficient maxillary bones. Additionally, a special newly developed remote incision technique is presented to avoid wound dehiscence. The results show optimal integration behavior of the FDBA block after six months and the formation of new vital bone. Thus, the results of the present case report confirm the use of the customized CAD/CAM bone block for augmentation of complex defects in the maxillary aesthetic zone as a successful treatment concept.

Exome-Wide Association Analysis of Coronary Artery Disease in the Kingdom of Saudi Arabia Population

PubMed Central

de Kovel, Carolien G.; Mulder, Flip; van Setten, Jessica; van ‘t Slot, Ruben; Al-Rubaish, Abdullah; Alshehri, Abdullah M.; Al Faraidy, Khalid; Al-Ali, Abdullah; Al-Madan, Mohammed; Al Aqaili, Issa; Larbi, Emmanuel; Al-Ali, Rudaynah; Alzahrani, Alhusain; Asselbergs, Folkert W.; Koeleman, Bobby P. C.; Al-Ali, Amein

2016-01-01

Coronary Artery Disease (CAD) remains the leading cause of mortality worldwide. Mortality rates associated with CAD have shown an exceptional increase particularly in fast developing economies like the Kingdom of Saudi Arabia (KSA). Over the past twenty years, CAD has become the leading cause of death in KSA and has reached epidemic proportions. This rise is undoubtedly caused by fast urbanization that is associated with a life-style that promotes CAD. However, the question remains whether genetics play a significant role and whether genetic susceptibility is increased in KSA compared to the well-studied Western European populations. Therefore, we performed an Exome-wide association study (EWAS) in 832 patients and 1,076 controls of Saudi Arabian origin to test whether population specific, strong genetic risk factors for CAD exist, or whether the polygenic risk score for known genetic risk factors for CAD, lipids, and Type 2 Diabetes show evidence for an enriched genetic burden. Our results do not show significant associations for a single genetic locus. However, the heritability estimate for CAD for this population was high (h2 = 0.53, S.E. = 0.1, p = 4e-12) and we observed a significant association of the polygenic risk score for CAD that demonstrates that the population of KSA, at least in part, shares the genetic risk associated to CAD in Western populations. PMID:26849363

Perfectionism dimensions and dependency in relation to personality vulnerability and psychosocial adjustment in patients with coronary artery disease.

PubMed

Dunkley, David M; Schwartzman, Deborah; Looper, Karl J; Sigal, John J; Pierre, Andrena; Kotowycz, Mark A

2012-06-01

The present study sought to illuminate self-criticism and personal standards dimensions of perfectionism and dependency as specific cognitive-personality vulnerability factors that might contribute to a better understanding of numerous psychosocial problem areas that are relevant to coronary artery disease (CAD). One hundred and twenty-three patients diagnosed with clinically significant CAD completed self-report questionnaires. Zero-order correlations and factor analysis results revealed that self-criticism was primarily related to personality vulnerability (aggression/anger/hostility, Type D negative affectivity) and psychosocial maladjustment (depressive symptoms, worry, avoidant coping, support dissatisfaction), whereas personal standards was primarily related to adaptive coping (problem-focused coping, positive reinterpretation) and dependency was primarily related to worry. Hierarchical regression results demonstrated the incremental utility of self-criticism, personal standards, and dependency in relation to (mal)adjustment over and above aggression/anger/hostility, negative affectivity, and social inhibition. Continued efforts to understand the role of perfectionism dimensions and dependency in CAD appear warranted.

Ruling out coronary artery disease in women with atypical chest pain: results of calcium score combined with coronary computed tomography angiography and associated radiation exposure.

PubMed

van der Zant, Friso M; Wondergem, Maurits; Lazarenko, Sergiy V; Geenen, Remy W F; Umans, Victor A; Cornel, Jan-Hein; Knol, Remco J J

2015-07-01

To assess the presence of coronary artery disease (CAD) in women with atypical chest pain with low or intermediate risk for significant CAD by means of calcium scoring (CaSc) combined with coronary computed tomography angiography (CCTA) and to estimate the equivalent radiation dose in women. From December 2011 until July 2013, all consecutively performed cardiac CTs in women with atypical chest pain were included prospectively in the present study. Both CaSc and CCTA were obtained by a dual source flying focal spot 2×64 slice Somatom Definition Flash. Absence of CAD was defined as CaSc 0 and absence of noncalcified plaques. Presence of CAD was determined as CaSc>0 and/or presence of noncalcified plaques. The impact on patient management was also scored within our patient cohort. A total of 1033 procedures in 1014 women (mean age 59±10 years; mean BMI 26±8) were analyzed. In 520 (51%) women, CAD was absent. In 494 (49%) women, CAD was diagnosed, and in this subgroup the mean CaSc was 137±229. Thirty-seven (7%) of 494 women with CAD showed only noncalcified plaques. The mean equivalent radiation dose for the cardiac CTs of 1014 women was 2.2±1.6 mSv. Combined CaSc and CCTA excludes CAD in approximately 50% of women with atypical chest pain, and delivers a modest radiation dose of 2.2±1.6 mSv. CCTA has a substantial impact on patient management and can thus be advocated as first diagnostic tool in excluding CAD in women with atypical chest pain in terms of latest generation equipment with emphasize on radiation reduction techniques.

Fully quantitative pixel-wise analysis of cardiovascular magnetic resonance perfusion improves discrimination of dark rim artifact from perfusion defects associated with epicardial coronary stenosis.

PubMed

Ta, Allison D; Hsu, Li-Yueh; Conn, Hannah M; Winkler, Susanne; Greve, Anders M; Shanbhag, Sujata M; Chen, Marcus Y; Patricia Bandettini, W; Arai, Andrew E

2018-03-08

Dark rim artifacts in first-pass cardiovascular magnetic resonance (CMR) perfusion images can mimic perfusion defects and affect diagnostic accuracy for coronary artery disease (CAD). We evaluated whether quantitative myocardial blood flow (MBF) can differentiate dark rim artifacts from true perfusion defects in CMR perfusion. Regadenoson perfusion CMR was performed at 1.5 T in 76 patients. Significant CAD was defined by quantitative invasive coronary angiography (QCA) ≥ 50% diameter stenosis. Non-significant CAD (NonCAD) was defined as stenosis by QCA < 50% diameter stenosis or computed tomographic coronary angiography (CTA) < 30% in all major epicardial arteries. Dark rim artifacts had study specific and guideline-based definitions for comparison purposes. MBF was quantified at the pixel-level and sector-level. In a NonCAD subgroup with dark rim artifacts, stress MBF was lower in the subendocardial than midmyocardial and epicardial layers (2.17 ± 0.61 vs. 3.06 ± 0.75 vs. 3.24 ± 0.80 mL/min/g, both p < 0.001) and was also 30% lower than in remote regions (2.17 ± 0.61 vs. 2.83 ± 0.67 mL/min/g, p < 0.001). However, subendocardial stress MBF in dark rim artifacts was 37-56% higher than in true perfusion defects (2.17 ± 0.61 vs. 0.95 ± 0.43 mL/min/g, p < 0.001). Absolute stress MBF differentiated CAD from NonCAD with an accuracy ranging from 86 to 89% (all p < 0.001) using pixel-level analyses. Similar results were seen at a sector level. Quantitative stress MBF is lower in dark rim artifacts than remote myocardium but significantly higher than in true perfusion defects. If confirmed in larger series, this approach may aid the interpretation of clinical stress perfusion exams. ClinicalTrials.gov Identifier: NCT00027170 ; first posted 11/28/2001; updated 11/27/2017.

75 FR 26349 - Medicare Program; Payment Policies Under the Physician Fee Schedule and Other Revisions to Part B...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... (AOE): AMA-PCPI Systemic Antimicrobial Therapy-- Avoidance of Inappropriate Use. 100 Colorectal Cancer... Angiotensin Receptor Blocker (ARB) Therapy for Patients with CAD and Diabetes and/or Left Ventricular Systolic... Diabetes Mellitus. 113 Preventive Care and Screening: NCQA Colorectal Cancer Screening. TBD Hypertension...

A computer-aided detection (CAD) system with a 3D algorithm for small acute intracranial hemorrhage

NASA Astrophysics Data System (ADS)

Wang, Ximing; Fernandez, James; Deshpande, Ruchi; Lee, Joon K.; Chan, Tao; Liu, Brent

2012-02-01

Acute Intracranial hemorrhage (AIH) requires urgent diagnosis in the emergency setting to mitigate eventual sequelae. However, experienced radiologists may not always be available to make a timely diagnosis. This is especially true for small AIH, defined as lesion smaller than 10 mm in size. A computer-aided detection (CAD) system for the detection of small AIH would facilitate timely diagnosis. A previously developed 2D algorithm shows high false positive rates in the evaluation based on LAC/USC cases, due to the limitation of setting up correct coordinate system for the knowledge-based classification system. To achieve a higher sensitivity and specificity, a new 3D algorithm is developed. The algorithm utilizes a top-hat transformation and dynamic threshold map to detect small AIH lesions. Several key structures of brain are detected and are used to set up a 3D anatomical coordinate system. A rule-based classification of the lesion detected is applied based on the anatomical coordinate system. For convenient evaluation in clinical environment, the CAD module is integrated with a stand-alone system. The CAD is evaluated by small AIH cases and matched normal collected in LAC/USC. The result of 3D CAD and the previous 2D CAD has been compared.

Incidence of undetected cement on CAD/CAM monolithic zirconia crowns and customized CAD/CAM implant abutments. A prospective case series.

PubMed

Wasiluk, Grzegorz; Chomik, Ewa; Gehrke, Peter; Pietruska, Małgorzata; Skurska, Anna; Pietruski, Jan

2017-07-01

The aim of this study was to assess the frequency of cement residues after cementation of CAD/CAM monolithic zirconia crowns on customized CAD/CAM titanium abutments. Sixty premolars and molars were restored on Astra Tech Osseospeed TX ™ implants using single monolithic zirconia crowns fixed on two types of custom-made abutments: Atlantis ™ titanium or Atlantis ™ Gold Hue. Occlusal openings providing access to the abutment screws were designed for retrievability of the crown/abutment connection. After fixation with glass ionomer cement, the crown/abutment units were unscrewed to evaluate the presence of residual cement. Dichotomous assessment of the presence or absence of cement at the crown/abutment unit and peri-implant tissues was performed. Clinically undetected cement excess was visible on 44 of 60 restorations (73.3%). There was no interdependency between residual cement presence and implant location or diameter. However, a dependency between the presence of residual cement and the aspect of the abutment/crown connection could be noted. The majority of the residues were observed on the distal (17.9%) and mesial (15%) aspects. While on the palatal/lingual aspect, the cement was visible in 8.8%; only 3.4% of all surfaces displayed cement residues. Within the limitations of the study, it can be concluded that the use of customized CAD/CAM abutments do not guarantee avoidance of subgingival cement residues after crown cementation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Geometric Model for a Parametric Study of the Blended-Wing-Body Airplane

NASA Technical Reports Server (NTRS)

Mastin, C. Wayne; Smith, Robert E.; Sadrehaghighi, Ideen; Wiese, Micharl R.

1996-01-01

A parametric model is presented for the blended-wing-body airplane, one concept being proposed for the next generation of large subsonic transports. The model is defined in terms of a small set of parameters which facilitates analysis and optimization during the conceptual design process. The model is generated from a preliminary CAD geometry. From this geometry, airfoil cross sections are cut at selected locations and fitted with analytic curves. The airfoils are then used as boundaries for surfaces defined as the solution of partial differential equations. Both the airfoil curves and the surfaces are generated with free parameters selected to give a good representation of the original geometry. The original surface is compared with the parametric model, and solutions of the Euler equations for compressible flow are computed for both geometries. The parametric model is a good approximation of the CAD model and the computed solutions are qualitatively similar. An optimal NURBS approximation is constructed and can be used by a CAD model for further refinement or modification of the original geometry.

Microleakage of composite crowns luted on CAD/CAM-milled human molars: a new method for standardized in vitro tests.

PubMed

Schlenz, Maximiliane Amelie; Schmidt, Alexander; Rehmann, Peter; Niem, Thomas; Wöstmann, Bernd

2018-04-24

To investigate debonding of full crowns made of CAD/CAM composites, CAD/CAM technology was applied to manufacture standardized test abutments to increase the reproducibility of human teeth used in in vitro studies. A virtual test abutment and the corresponding virtual crown were designed and two STL data sets were generated. Sixty-four human third molars and CAD/CAM blocks were milled using a CNC machine. Crowns of four different composite blocks (Lava Ultimate (LU), Brilliant Crios (BC), Cerasmart (CS), Experimental (EX)) were adhesively bonded with their corresponding luting system (LU: Scotchbond Universal/RelyX Ultimate; BC: One Coat 7 Universal/DuoCem; CS: G-PremioBond/G-Cem LinkForce; EX: Experimental-Bond/Experimental-Luting-Cement). Half of the specimens were chemical-cured (CC) and the others were light-cured (LC). Afterwards, specimens were artificially aged in a chewing simulator (WL-tec, 1 million cycles, 50-500 N, 2 Hz, 37 °C). Finally, a dye penetration test was used to detect debonding. For inspection, the specimens were sliced, and penetration depth was measured with a digital microscope. Data were analyzed with the Mann-Whitney U test. No cases of total debonding were observed after cyclic loading. However, the LC specimens showed a significantly lower amount of leakage than the CC ones (p < 0.05). Furthermore, the CC specimens exhibited broad scattering. Only the LC-EX blocks showed no debonding. The CC-CS blocks showed the highest leakage and scattering of all tested specimens. Natural human teeth can be manufactured by CAD/CAM technology in highly standardized test abutments for in vitro testing. For CAD/CAM composites, light curing should be performed. The success of a restoration depends on the long-term sealing ability of the luting materials, which avoids debonding along with microleakage. For CAD/CAM composites, separate light curing of the adhesive and luting composite is highly recommended.

SNP-SNP Interaction between TLR4 and MyD88 in Susceptibility to Coronary Artery Disease in the Chinese Han Population.

PubMed

Sun, Dandan; Sun, Liping; Xu, Qian; Gong, Yuehua; Wang, Honghu; Yang, Jun; Yuan, Yuan

2016-03-04

The toll-like receptor 4 (TLR4)-myeloid differentiation factor 88 (MyD88)-dependent signaling pathway plays a role in the initiation and progression of coronary artery disease (CAD). We investigated SNP-SNP interactions between the TLR4 and MyD88 genes in CAD susceptibility and assessed whether the effects of such interactions were modified by confounding risk factors (hyperglycemia, hyperlipidemia and Helicobacter pylori (H. pylori) infection). Participants with CAD (n = 424) and controls (n = 424) without CAD were enrolled. Polymerase chain restriction-restriction fragment length polymorphism was performed on genomic DNA to detect polymorphisms in TLR4 (rs10116253, rs10983755, and rs11536889) and MyD88 (rs7744). H. pylori infections were evaluated by enzyme-linked immunosorbent assays, and the cardiovascular risk factors for each subject were evaluated clinically. The significant interaction between TLR4 rs11536889 and MyD88 rs7744 was associated with an increased CAD risk (p value for interaction = 0.024). In conditions of hyperglycemia, the interaction effect was strengthened between TLR4 rs11536889 and MyD88 rs7744 (p value for interaction = 0.004). In hyperlipidemic participants, the interaction strength was also enhanced for TLR4 rs11536889 and MyD88 rs7744 (p value for interaction = 0.006). Thus, the novel interaction between TLR4 rs11536889 and MyD88 rs7744 was related with an increased risk of CAD, that could be strengthened by the presence of hyperglycemia or hyperlipidemia.

Advanced Atherogenic Index for the Assessment of Consolidated Lipid Risk in Premature Coronary Artery Disease Patients in India.

PubMed

Bansal, Sanjiv Kumar; Agarwal, Sarita; Daga, Mridul Kumar

2016-01-01

The high prevalence, severity, and prematurity of coronary artery disease (CAD) in the Indian population cannot be completely explained by the conventional lipid parameters and the existing lipid indices. To calculate newly defined advanced atherogenic index (AAI) in premature CAD patients and compare it between cases and controls and Correlate its values with the existing indices. One hundred and twenty premature CAD patients and an equal number of age and sex matched healthy individuals were included in this study. Lipid profile and nonconventional lipid parameters like oxidized Low density lipoprotein (OX LDL), small dense LDL (SD LDL), lipoprotein (a) apolipoprotein B (Apo B), and apolipoprotein A1 (Apo A1) were estimated and their values were used to define AAI and existing lipid indices like AI, lipid tetrad index (LTI) and lipid pentad index (LPI). The mean age of cases and controls was 37.29 + 4.50 and 36.13 + 3.53 years, respectively. The value of AAI was highly significant in cases (3461.22 ± 45.20) as compared to controls (305.84 ± 21.80). AAI has shown better statistical significance and correlation (P < 0.0001, r = 0.737) as compared to the earlier indices such as AI (P < 0.01, r = 0.52), LTI (P < 0.001, r = 0.677) and LPI (P < 0.001, r = 0.622) in premature CAD. Kolmogorov D statistic and cumulative distribution function plot has shown that AAI can discriminate cases and controls more accurately as compared to the earlier indices. Statistically AAI appears to be a better marker of consolidated lipid risk in premature CAD patients as compared to the earlier indices.

Central Core Laboratory versus Site Interpretation of Coronary CT Angiography: Agreement and Association with Cardiovascular Events in the PROMISE Trial.

PubMed

Lu, Michael T; Meyersohn, Nandini M; Mayrhofer, Thomas; Bittner, Daniel O; Emami, Hamed; Puchner, Stefan B; Foldyna, Borek; Mueller, Martin E; Hearne, Steven; Yang, Clifford; Achenbach, Stephan; Truong, Quynh A; Ghoshhajra, Brian B; Patel, Manesh R; Ferencik, Maros; Douglas, Pamela S; Hoffmann, Udo

2018-04-01

Purpose To assess concordance and relative prognostic utility between central core laboratory and local site interpretation for significant coronary artery disease (CAD) and cardiovascular events. Materials and Methods In the Prospective Multicenter Imaging Study for Evaluation of Chest Pain (PROMISE) trial, readers at 193 North American sites interpreted coronary computed tomographic (CT) angiography as part of the clinical evaluation of stable chest pain. Readers at a central core laboratory also interpreted CT angiography blinded to clinical data, site interpretation, and outcomes. Significant CAD was defined as stenosis greater than or equal to 50%; cardiovascular events were defined as a composite of cardiovascular death or myocardial infarction. Results In 4347 patients (51.8% women; mean age ± standard deviation, 60.4 years ± 8.2), core laboratory and site interpretations were discordant in 16% (683 of 4347), most commonly because of a finding of significant CAD by site but not by core laboratory interpretation (80%, 544 of 683). Overall, core laboratory interpretation resulted in 41% fewer patients being reported as having significant CAD (14%, 595 of 4347 vs 23%, 1000 of 4347; P < .001). Over a median follow-up period of 25 months, 1.3% (57 of 4347) sustained myocardial infarction or cardiovascular death. The C statistic for future myocardial infarction or cardiovascular death was 0.61 (95% confidence interval [CI]: 0.54, 0.68) for the core laboratory and 0.63 (95% CI: 0.56, 0.70) for the sites. Conclusion Compared with interpretation by readers at 193 North American sites, standardized core laboratory interpretation classified 41% fewer patients as having significant CAD. © RSNA, 2017 Online supplemental material is available for this article. Clinical trial registration no. NCT01174550.

Dietary intake of patients with angiographically defined coronary artery disease and that of healthy controls in Iran.

PubMed

Nazeminezhad, R; Tajfard, M; Latiff, L A; Mouhebati, M; Esmaeily, H; Ferns, G A A; Ghayour-Mobarhan, M; Rahimi, H R

2014-01-01

The aim of this study was to investigate the relationship between dietary intake and biomarkers of cardiovascular risk in individuals with and without angiographically defined coronary artery disease. Coronary angiography was undertaken in 445 individuals who were divided into those with significant disease (>50% occlusion) (Angio+ (n=273)) and those with <50% coronary artery occlusion (Angio- (n=172)). Apparently healthy, non-symptomatic individuals (n=443) were considered as the control group. Dietary intake was assessed using a 24-h dietary recall method and dietary analysis was performed using Diet Plan 6 software. Concentrations of starch, saturated fatty acids, polyunsaturated fatty acids, magnesium, iron and copper in the control group were less than those in the other groups (P<0.05), but after adjusting for total energy intake these differences were no longer apparent. The mean intake of protein, cholesterol, phosphorus, zinc, zinc/copper ratio, selenium, iodine, carotene, vitamin E, niacin, pantothene and pyridoxine was less in the control group compared with the other two groups (P<0.05), and the mean of sugar, fiber, transfatty acids, manganese, folate and vitamin C was higher in the control group than in other groups (P<0.05). Lipid profile values between the three groups did not differ significantly. These results indicate that the amount of intake of various nutrients can be considered as an independent risk factor for CAD. Further research on the relationship between CAD and nutrient intake, especially intake of essential micronutrients, is needed.

Hands-on work fine-tunes X-band PIN-diode duplexer

NASA Astrophysics Data System (ADS)

Schneider, P.

1985-06-01

Computer-aided design (CAD) programs for fabricating PIN-diode duplexers are useful in avoiding time-consuming cut-and-try techniques. Nevertheless, to attain minimum insertion loss, only experimentation yields the optimum microstrip circuitry. A PIN-diode duplexer, consisting of two SPST PIN-diode switches and a pair of 3-dB Lange microstrip couplers, designed for an X-band transmit/receive module exemplifies what is possible when computer-derived designs and experimentation are used together. Differences between the measured and computer-generated figures for insertion loss can be attributed to several factors not included in the CAD program - for example, radiation and connector losses. Mechanical tolerances of the microstrip PC board and variations in the SMA connector-to-microstrip transition contribute to the discrepancy.

The copeptin response after physical activity is not associated with cardiac biomarkers or asymptomatic coronary artery disease: The North Sea Race Endurance Exercise Study (NEEDED) 2013.

PubMed

Aakre, Kristin M; Kleiven, Øyunn; Skadberg, Øyvind; Bjørkavoll-Bergseth, Magnus F; Melberg, Tor; Strand, Heidi; Hagve, Tor-Arne; Ørn, Stein

2018-02-01

Copeptin concentrations increase both during acute coronary syndrome and following physical exercise. The relationship between copeptin increase following physical exercise and coronary artery disease (CAD) is uncertain. The aim of this study was to 1) describe the copeptin response following strenuous physical exercise, and 2) investigate the determinants of exercise induced copeptin concentrations, particularly in relation to cardiac biomarkers and CAD. Serum samples were collected from 97 recreational cyclists 24h before, and immediately, 3 and 24h after a 91-km bike race. Three subjects were subsequently diagnosed with significant asymptomatic CAD. Delta copeptin concentrations were correlated to patient characteristics and to biomarker concentrations. Participants were 42.8±9.6years, and 76.3% were male. Copeptin concentrations increased to maximal levels immediately after the race and were normalized in >90% after 3h. A total of 53% and 39% exceeded the 95th and 99th percentile of the assay (10 and 19pmol/L) respectively. In multivariate models, race time, serum sodium, creatinine and cortisol were significant predictors of copeptin levels. There was no correlation between changes in copeptin and changes in cardiac biomarkers (hs-cTnI, hs-cTnT and BNP). Copeptin concentrations were normal in the subjects with asymptomatic CAD. The moderate, short-term, exercise induced copeptin increase observed in the present study was not related to hs-cTn or BNP levels. Copeptin was normal in three asymptomatic recreational athletes with significant CAD. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Analysis on the workspace of palletizing robot based on AutoCAD

NASA Astrophysics Data System (ADS)

Li, Jin-quan; Zhang, Rui; Guan, Qi; Cui, Fang; Chen, Kuan

2017-10-01

In this paper, a four-degree-of-freedom articulated palletizing robot is used as the object of research. Based on the analysis of the overall configuration of the robot, the kinematic mathematical model is established by D-H method to figure out the workspace of the robot. In order to meet the needs of design and analysis, using AutoCAD secondary development technology and AutoLisp language to develop AutoCAD-based 2D and 3D workspace simulation interface program of palletizing robot. At last, using AutoCAD plugin, the influence of structural parameters on the shape and position of the working space is analyzed when the structure parameters of the robot are changed separately. This study laid the foundation for the design, control and planning of palletizing robots.

Teaching CAD at the University: Specifically Written or Commercial Software?

ERIC Educational Resources Information Center

Garcia, Ramon Rubio; Quiros, Javier Suarez; Santos, Ramon Gallego; Penin, Pedro I. Alvarez

2007-01-01

At most universities throughout the world Computer Aided Design is taught using commercial programs more suitable for business and industry than for teaching. This led us to write our own design program (GIcad) starting from the best-known standards on the market, but always avoiding unnecessary commands in the first steps of the learning process.…

Molecular and functional characterization of polymorphisms in the secreted phospholipase A2 group X gene: relevance to coronary artery disease.

PubMed

Gora, Sarah; Perret, Claire; Jemel, Ikram; Nicaud, Viviane; Lambeau, Gérard; Cambien, François; Ninio, Ewa; Blankenberg, Stefan; Tiret, Laurence; Karabina, Sonia-Athina

2009-07-01

Among secreted phospholipases A2 (sPLA2s), human group X sPLA2 (hGX sPLA2) is emerging as a novel attractive therapeutic target due to its implication in inflammatory diseases. To elucidate whether hGX sPLA2 plays a causative role in coronary artery disease (CAD), we screened the human PLA2G10 gene to identify polymorphisms and possible associations with CAD end-points in a prospective study, AtheroGene. We identified eight polymorphisms, among which, one non-synonymous polymorphism R38C in the propeptide region of the sPLA2. The T-512C polymorphism located in the 5' untranslated region was associated with a decreased risk of recurrent cardiovascular events during follow-up. The functional analysis of the R38C polymorphism showed that it leads to a profound change in expression and activity of hGX sPLA2, although there was no detectable impact on CAD risk. Due to the potential role of hGX sPLA2 in inflammatory processes, these polymorphisms should be investigated in other inflammatory diseases.

Diagnostic power of longitudinal strain at rest for the detection of obstructive coronary artery disease in patients with type 2 diabetes mellitus.

PubMed

Zuo, Houjuan; Yan, Jiangtao; Zeng, Hesong; Li, Wenyu; Li, Pengcheng; Liu, Zhengxiang; Cui, Guanglin; Lv, Jiagao; Wang, Daowen; Wang, Hong

2015-01-01

Global longitudinal strain (GLS) measured by 2-D speckle-tracking echocardiography (2-D STE) at rest has been recognized as a sensitive parameter in the detection of significant coronary artery disease (CAD). However, the diagnostic power of 2-D STE in the detection of significant CAD in patients with diabetes mellitus is unknown. Two-dimensional STE features were studied in total of 143 consecutive patients who underwent echocardiography and coronary angiography. Left ventricular global and segmental peak systolic longitudinal strains (PSLSs) were quantified by speckle-tracking imaging. In the presence of obstructive CAD (defined as stenosis ≥75%), global PSLS was significantly lower in patients with diabetes mellitus than in patients without (16.65 ± 2.29% vs. 17.32 ± 2.27%, p < 0.05). Receiver operating characteristic analysis revealed that global PSLS could effectively detect obstructive CAD in patients without diabetes mellitus (cutoff value: -18.35%, sensitivity: 78.8%, specificity: 77.5%). However, global PSLS could detect obstructive CAD in diabetic patients at a lower cutoff value with inadequate sensitivity and specificity (cutoff value: -17.15%; sensitivity: 61.1%, specificity: 52.9%). In addition, the results for segmental PSLS were similar to those for global PSLS. In conclusion, global and segmental PSLSs at rest were significantly lower in patients with both obstructive CAD and diabetes mellitus than in patients with obstructive CAD only; thus, PSLSs at rest might not be a useful parameter in the detection of obstructive CAD in patients with diabetes mellitus. Copyright © 2015 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Usefulness of Circulating Decoy Receptor 3 in Predicting Coronary Artery Disease Severity and Future Major Adverse Cardiovascular Events in Patients With Multivessel Coronary Artery Disease.

PubMed

Chang, Ting-Yung; Hsu, Chien-Yi; Huang, Po-Hsun; Chiang, Chia-Hung; Leu, Hsin-Bang; Huang, Chin-Chou; Chen, Jaw-Wen; Lin, Shing-Jong

2015-10-01

Decoy receptor 3 (DcR3), a member of the tumor necrosis factor receptor superfamily, is an antiapoptotic soluble receptor considered to play an important role in immune modulation and has pro-inflammatory functions. This study was designed to test whether circulating DcR3 levels are associated with coronary artery disease (CAD) severity and predict future major adverse cardiovascular events (MACEs) in patients with CAD. Circulating DcR3 levels and the Syntax score (SXscore) were determined in patients with multivessel CAD. The primary end point was the MACE within 12 months. In total, 152 consecutive patients with angiographically confirmed multivessel CAD who had received percutaneous coronary intervention were enrolled and were divided into 3 groups according to CAD lesion severity. Group 1 was defined as low SXscore (≤13), group 2 as intermediate SXscore (>13 and ≤22), and group 3 as high SXscore (>22). DcR3 levels were significantly higher in the high SXscore group than the other 2 groups (13,602 ± 7,256 vs 8,025 ± 7,789 vs 4,637 ± 4,403 pg/ml, p <0.001). By multivariate analysis, circulating DcR3 levels were identified as an independent predictor for high SXscore (adjusted odds ratio 1.15, 95% confidence interval 1.09 to 1.21; p <0.001). The Kaplan-Meier analysis showed that increased circulating DcR3 levels are associated with enhanced 1-year MACE in patients with multivessel CAD (log-rank p <0.001). In conclusion, increased circulating DcR3 levels are associated with CAD severity and predict future MACE in patients with multivessel CAD. Copyright © 2015 Elsevier Inc. All rights reserved.

N-terminal B-type natriuretic peptide concentrations are similarly increased by 30 minutes of moderate and brisk walking in patients with coronary artery disease.

PubMed

Scharhag, Jürgen; Herrmann, Markus; Weissinger, Melanie; Herrmann, Wolfgang; Kindermann, Wilfried

2007-04-01

Elevated concentrations of B-type natriuretic peptide (BNP) and N-terminal pro- BNP (NT-proBNP) reflect elevated myocardial wall stress due to volume or pressure overload in cardiac disease. Recently, exercise-induced elevations of (NT-pro)BNP in coronary artery disease (CAD) patients have been reported to result from exercise-induced ischemia associated regional wall abnormalities. Therefore, the study aimed to examine NT-proBNP concentrations in patients with CAD after moderate and brisk walking (MW, BW). We hypothesized that BW induces higher increases than MW. In randomized order 14 patients with stable CAD (12 male symbol/2 female symbol; 63 +/- 9 years; LV ejection fraction: 59+/-9%) of a out-patient rehabilitation group performed MW with 4.5 +/- 0.6 km/h (mean heart rate: 80 +/- 11/min) or BWat their allowed upper exercise heart rate of 102+/-9/min with a speed of 6.2 +/- 0.6 km/h for 30 min on a tartan track on two separate days. Blood samples were taken before, immediately, 1 h, 3 h and 1 day after exercise to determine NT-proBNP and cardiac troponin T (cTnT). Echocardiographic LV function was determined before and 1 h after exercise. Median concentrations of NT-proBNP significantly increased from 222 to 295 ng/l (MW) and from 222 to 296 ng/l (BW) without a difference between both modalities. cTnT remained below the detection limit of 0.01 microg/l. LV functions remained unchanged. A cutoff level of 250 ng/l distinguished CAD patients with elevated exercise-induced increases in NT-proBNP and a diminished LV ejection fraction at rest. BW and MW induce similar increases in NT-proBNP in CAD patients without myocardial damage, which have to be considered when NT-proBNP is determined. Derived from the exercise- induced increase in NTproBNP, the myocardial strain in BW is not elevated in comparison to MW.

The Effect of a Vegan versus AHA DiEt in Coronary Artery Disease (EVADE CAD) trial: study design and rationale.

PubMed

Shah, Binita; Ganguzza, Lisa; Slater, James; Newman, Jonathan D; Allen, Nicole; Fisher, Edward; Larigakis, John; Ujueta, Francisco; Gianos, Eugenia; Guo, Yu; Woolf, Kathleen

2017-12-01

Multiple studies demonstrate the benefit of a vegan diet on cardiovascular risk factors when compared to no intervention or usual dietary patterns. The aim of this study is to evaluate the effect of a vegan diet versus the American Heart Association (AHA)-recommended diet on inflammatory and glucometabolic profiles in patients with angiographically defined coronary artery disease (CAD). This study is a randomized, open label, blinded end-point trial of 100 patients with CAD as defined by ≥50% diameter stenosis in a coronary artery ≥2 mm in diameter on invasive angiography. Participants are randomized to 8 weeks of either a vegan or AHA-recommended diet (March 2014 and February 2017). Participants are provided weekly groceries that adhere to the guidelines of their diet. The primary endpoint is high sensitivity C-reactive concentrations. Secondary endpoints include anthropometric data, other markers of inflammation, lipid parameters, glycemic markers, endothelial function, quality of life data, and assessment of physical activity. Endpoints are measured at each visit (baseline, 4 weeks, and 8 weeks). Dietary adherence is measured by two weekly 24-hour dietary recalls, a 4-day food record during the week prior to each visit, and both plasma and urine levels of trimethylamine- N -oxide at each visit. This study is the first to comprehensively assess multiple indices of inflammation and glucometabolic profile in a rigorously conducted randomized trial of patients with CAD on a vegan versus AHA-recommended diet.

3D model assisted fully automated scanning laser Doppler vibrometer measurements

NASA Astrophysics Data System (ADS)

Sels, Seppe; Ribbens, Bart; Bogaerts, Boris; Peeters, Jeroen; Vanlanduit, Steve

2017-12-01

In this paper, a new fully automated scanning laser Doppler vibrometer (LDV) measurement technique is presented. In contrast to existing scanning LDV techniques which use a 2D camera for the manual selection of sample points, we use a 3D Time-of-Flight camera in combination with a CAD file of the test object to automatically obtain measurements at pre-defined locations. The proposed procedure allows users to test prototypes in a shorter time because physical measurement locations are determined without user interaction. Another benefit from this methodology is that it incorporates automatic mapping between a CAD model and the vibration measurements. This mapping can be used to visualize measurements directly on a 3D CAD model. The proposed method is illustrated with vibration measurements of an unmanned aerial vehicle

Additional diagnostic value of systolic dysfunction induced by dipyridamole stress cardiac magnetic resonance used in detecting coronary artery disease.

PubMed

Husser, Oliver; Bodí, Vicente; Sanchís, Juan; Mainar, Luis; Núñez, Julio; López-Lereu, María P; Monmeneu, José V; Ruiz, Vicente; Rumiz, Eva; Moratal, David; Chorro, Francisco J; Llácer, Angel

2009-04-01

Dipyridamole stress perfusion cardiovascular magnetic resonance (CMR) is used to detect coronary artery disease (CAD). However, few data are available on the diagnostic value of the systolic dysfunction induced by dipyridamole. This study investigated whether the induction of systolic dysfunction supplements the diagnostic information provided by perfusion imaging in the detection of CAD. Overall, 166 patients underwent dipyridamole CMR and quantitative coronary angiography, with CAD being defined as a stenosis > or =70%. Systolic dysfunction at rest, systolic dysfunction with dipyridamole, induced systolic dysfunction, and stress first-pass perfussion deficit (PD) and delayed enhancement were quantified. In the multivariate analysis, PD (hazard ratio [HR]=1.6; 95% confidence interval [CI], 1.33-1.91;P< .0001) and induced systolic dysfunction (OR=1.8; 95% CI, 1.18-2.28; P< .007) were independently associated with CAD and had a sensitivity and specificity of 92% and 62% and 43% and 96%, respectively. Patients were categorized as having no ischemia (Group 1), PD but no induced systolic dysfunction (Group 2), or induced systolic dysfunction irrespective of PD (Group 3). In Group 3, the prevalence of CAD was higher than in Group 1 or 2 (96% vs. 22% and 79%, respectively; P=.001) and the risk of CAD was two-fold higher than in Group 2 (OR=2.34; 95% CI, 1.07-5.13; P=.034). Compared with Group 2, more hypoperfused segments were observed in Group 3 (6.2+/-2.6 vs. 7.4+/-3.4; P=.044), and more diseased vessels (1.4+/-1.0 vs. 1.8+/-0.9; P=.036). Adding induced systolic dysfunction to perfusion and clinical data improved the multivariate model's C-statistic for predicting CAD (0.81 vs. 0.87; P=.02). Combining induced systolic dysfunction with perfusion imaging increases the diagnostic accuracy of detecting CAD and enables patients with severe ischemia and a high probability of CAD to be identified.

Long-Term Prognostic Value of Coronary CT Angiography in Asymptomatic Type 2 Diabetes Mellitus.

PubMed

Kang, Se Hun; Park, Gyung-Min; Lee, Seung-Whan; Yun, Sung-Cheol; Kim, Young-Hak; Cho, Young-Rak; Park, Hyun Woo; Suh, Jon; Yang, Dong Hyun; Kang, Joon-Won; Lim, Tae-Hwan; Jung, Chang Hee; Koh, Eun Hee; Lee, Woo Je; Kim, Min-Seon; Lee, Ki-Up; Park, Joong-Yeol

2016-11-01

This study sought to evaluate the long-term prognostic value of coronary computed tomography angiography (CTA) in asymptomatic patients with type 2 diabetes mellitus. There are limited data on the long-term prognostic impact of coronary CTA in asymptomatic patients with type 2 diabetes mellitus. This study analyzed clinical outcomes of 591 consecutive asymptomatic patients with type 2 diabetes mellitus who underwent coronary CTA (mean age 62.2 ± 8.3 years and 352 men [59.6%]). A cardiac event was defined as a composite of cardiac death, nonfatal myocardial infarction, unstable angina requiring hospitalization, or late coronary revascularization. Patients were categorized into 3 groups according to severity of coronary artery disease (CAD) on coronary CTA: normal coronary arteries, nonobstructive CAD (<50%), and obstructive CAD (≥50%). One hundred sixty-eight patients (28.4%) had normal coronary arteries, whereas 236 (39.9%) patients had nonobstructive CAD and 187 (31.6%) had obstructive CAD. During the follow-up period (median 5.3 years [interquartile range: 4.7 to 5.8 years]), 37 cardiac events occurred in 29 patents: 10 cardiac deaths, 2 nonfatal myocardial infarctions, 8 cases of unstable angina, and 17 late coronary revascularizations. The 6-year event-free survival rates were 99.3 ± 0.7% in patients with normal coronary arteries, 96.7 ± 1.2% in patients with nonobstructive CAD, and 86.2 ± 3.0% in patients with obstructive CAD (log-rank p < 0.001). Asymptomatic patients with type 2 diabetes mellitus with normal coronary arteries or nonobstructive CAD on coronary CTA show excellent clinical outcomes over a follow-up period of more than 5 years, whereas prognosis is worse in patients with obstructive CAD. These findings suggest long-term prognostic value of coronary CTA for asymptomatic type 2 diabetes mellitus. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Coronary revascularization vs. medical therapy following coronary-computed tomographic angiography in patients with low-, intermediate- and high-risk coronary artery disease: results from the CONFIRM long-term registry

PubMed Central

Schulman-Marcus, Joshua; Lin, Fay Y.; Gransar, Heidi; Berman, Daniel; Callister, Tracy; DeLago, Augustin; Hadamitzky, Martin; Hausleiter, Joerg; Al-Mallah, Mouaz; Budoff, Matthew; Kaufmann, Philipp; Achenbach, Stephan; Raff, Gilbert; Chinnaiyan, Kavitha; Cademartiri, Filippo; Maffei, Erica; Villines, Todd; Kim, Yong-Jin; Leipsic, Jonathon; Feuchtner, Gudrun; Rubinshtein, Ronen; Pontone, Gianluca; Andreini, Daniele; Marques, Hugo; Chang, Hyuk-Jae; Chow, Benjamin J.W.; Cury, Ricardo C.; Dunning, Allison; Shaw, Leslee; Min, James K.

2017-01-01

Abstract Aims To identify the effect of early revascularization on 5-year survival in patients with CAD diagnosed by coronary-computed tomographic angiography (CCTA). Methods and results We examined 5544 stable patients with suspected CAD undergoing CCTA who were followed a median of 5.5 years in a large international registry. Patients were categorized as having low-, intermediate-, or high-risk CAD based on CCTA findings. Two treatment groups were defined: early revascularization within 90 days of CCTA (n = 1171) and medical therapy (n = 4373). To account for the non-randomized referral to revascularization, we developed a propensity score by logistic regression. This score was incorporated into Cox proportional hazard models to calculate the effect of revascularization on all-cause mortality. Death occurred in 363 (6.6%) patients and was more frequent in medical therapy. In multivariable models, when compared with medical therapy, the mortality benefit of revascularization varied significantly over time and by CAD risk (P for interaction 0.04). In high-risk CAD, revascularization was significantly associated with lower mortality at 1 year (hazard ratio [HR] 0.22, 95% confidence interval [CI] 0.11–0.47) and 5 years (HR 0.31, 95% CI 0.18–0.54). For intermediate-risk CAD, revascularization was associated with reduced mortality at 1 year (HR 0.45, 95% CI 0.22–0.93) but not 5 years (HR 0.63, 95% CI 0.33–1.20). For low-risk CAD, there was no survival benefit at either time point. Conclusions Early revascularization was associated with reduced 1-year mortality in intermediate- and high-risk CAD detected by CCTA, but this association only persisted for 5-year mortality in high-risk CAD. PMID:28329294

Comparison of exercise electrocardiography and stress perfusion CMR for the detection of coronary artery disease in women

PubMed Central

2012-01-01

Background Exercise electrocardiography (ECG) is frequently used in the work-up of patients with suspected coronary artery disease (CAD), however the accuracy is reduced in women. Cardiovascular magnetic resonance (CMR) stress testing can accurately diagnose CAD in women. To date, a direct comparison of CMR to ECG has not been performed. Methods and results We prospectively enrolled 88 consecutive women with chest pain or other symptoms suggestive of CAD. Patients underwent a comprehensive clinical evaluation, exercise ECG, a CMR stress test including perfusion and infarct imaging, and x-ray coronary angiography (CA) within 24 hours. CAD was defined as stenosis ≥70% on quantitative analysis of CA. Exercise ECG, CMR and CA was completed in 68 females (age 66.4 ± 8.8 years, number of CAD risk factors 3.5 ± 1.4). The prevalence of CAD on CA was 29%. The Duke treadmill score (DTS) in the entire group was −3.0 ± 5.4 and was similar in those with and without CAD (−4.5 ± 5.8 and −2.4 ± 5.1; P = 0.12). Sensitivity, specificity and accuracy for CAD diagnosis was higher for CMR compared with exercise ECG (sensitivities 85% and 50%, P = 0.02, specificities 94% and 73%, P = 0.01, and accuracies 91% and 66%, P = 0.0007, respectively). Even after applying the DTS the accuracy of CMR was higher compared to exercise ECG (area under ROC curve 0.94 ± 0.03 vs 0.56 ± 0.07; P = 0.0001). Conclusions In women with intermediate-to-high risk for CAD who are able to exercise and have interpretable resting ECG, CMR stress perfusion imaging has higher accuracy for the detection of relevant obstruction of the epicardial coronaries when directly compared to exercise ECG. PMID:22697372

Celecoxib and sulfasalazine had negative association with coronary artery diseases in patients with ankylosing spondylitis

PubMed Central

Wu, Li-Chih; Leong, Pui-Ying; Yeo, Kai-Jieh; Li, Ting-Yu; Wang, Yu-Hsun; Chiou, Jeng-Yuan; Wei, James Cheng-Chung

2016-01-01

Abstract The aim of the study is to assess the effects of celecoxib and sulfasalazine on the risk of coronary artery disease (CAD) in patients with ankylosing spondylitis (AS). Using the claims data of Taiwan National Health Insurance (NHI) database, a nationally representative data that contain the medical records of 23 million Taiwan residents, we randomly selected 1 million cohort from the database, and then we enrolled only patients who were newly diagnosed with AS (n = 4829) between year 2001 and 2010, excluding patients who had CAD (ICD-9- CM codes: 410–414) before the diagnosis of AS (n = 4112). According to propensity score matched 1:2 on age, gender, AS duration, Charlson comorbidity index, hypertension, and hyperlipidemia, 236 and 472 patients were included in the case (AS with CAD) and control (AS without CAD) groups, respectively. We used the WHO defined daily dose (DDD) as a tool to assess the dosage of sulfasalazine and celecoxib exposure. Conditional logistic regression was used to estimate the crude and adjusted odds ratios (ORs) and 95% confidence interval (CI) for the risk of CAD associated with use of sulfasalazine and celecoxib. Among 4112 AS patients, 8.4% (346/4112) developed CAD. CAD in AS patients were positively associated with age of 35 to 65, Charlson comorbidities index (CCI), hypertension, and hyperlipidemia. There was no gender difference between case and control groups. After adjustment for age, gender, CCI, hypertension, and hyperlipidemia, sulfasalazine users with an average daily dose ≥ 0.5 DDD (0.5 gm/day) had negative association with CAD events as compared to sulfasalazine nonusers (OR 0.63; 95% CI, 0.40–0.99, P < 0.05). NSAIDs, including celecoxib, etoricoxib, but no naproxen and diclofenac were negatively associated with CAD. Celecoxib users, with an average daily dose > 1.5 DDD, were negatively associated with CAD events, compared to celecoxib nonusers (OR 0.34; 95% CI, 0.13–0.89; P < 0.05). In this 10-year population-based case-control study, 8.4% of AS patients developed CAD. Sulfasalazine usage at an average dose of ≥ 0.5 gm/day demonstrated negative association with CAD events in patients with AS. PMID:27603385

SPECT myocardial perfusion imaging as an adjunct to coronary calcium score for the detection of hemodynamically significant coronary artery stenosis

PubMed Central

2012-01-01

Background Coronary artery calcifications (CAC) are markers of coronary atherosclerosis, but do not correlate well with stenosis severity. This study intended to evaluate clinical situations where a combined approach of coronary calcium scoring (CS) and nuclear stress test (SPECT-MPI) is useful for the detection of relevant CAD. Methods Patients with clinical indication for invasive coronary angiography (ICA) were included into our study during 08/2005-09/2008. At first all patients underwent CS procedure as part of the study protocol performed by either using a multidetector computed tomography (CT) scanner or a dual-source CT imager. CAC were automatically defined by dedicated software and the Agatston score was semi-automatically calculated. A stress-rest SPECT-MPI study was performed afterwards and scintigraphic images were evaluated quantitatively. Then all patients underwent ICA. Thereby significant CAD was defined as luminal stenosis ≥75% in quantitative coronary analysis (QCA) in ≥1 epicardial vessel. To compare data lacking Gaussian distribution an unpaired Wilcoxon-Test (Mann–Whitney) was used. Otherwise a Students t-test for unpaired samples was applied. Calculations were considered to be significant at a p-value of <0.05. Results We consecutively included 351 symptomatic patients (mean age: 61.2±12.3 years; range: 18–94 years; male: n=240) with a mean Agatston score of 258.5±512.2 (range: 0–4214). ICA verified exclusion of significant CAD in 66/67 (98.5%) patients without CAC. CAC was detected in remaining 284 patients. In 132/284 patients (46.5%) with CS>0 significant CAD was confirmed by ICA, and excluded in 152/284 (53.5%) patients. Sensitivity for CAD detection by CS alone was calculated as 99.2%, specificity was 30.3%, and negative predictive value was 98.5%. An additional SPECT in patients with CS>0 increased specificity to 80.9% while reducing sensitivity to 87.9%. Diagnostic accuracy was 84.2%. Conclusions In patients without CS=0 significant CAD can be excluded with a high negative predictive value by CS alone. An additional SPECT-MPI in those patients with CS>0 leads to a high diagnostic accuracy for the detection of CAD while reducing the number of patients needing invasive diagnostic procedure. PMID:23206557

Obstructive airway diseases in women exposed to biomass smoke.

PubMed

Ekici, Aydanur; Ekici, Mehmet; Kurtipek, Ercan; Akin, Ahmet; Arslan, Mesut; Kara, Türkan; Apaydin, Zeliha; Demir, Selma

2005-09-01

The majority of women living in rural areas in Turkey use biomass fuels for domestic energy and are exposed to high levels of indoor air pollution every day. The objective of this study was to compare the presence of chronic airway diseases (CAD) in two groups of nonsmoking women older than 40 years with (exposed group, n=397) and without a history of exposure to biomass cooking (liquid petroleum gas (LPG); control group, n=199), in 2002 in Kirikkale, Turkey. Detailed respiratory symptoms were collected with a standard questionnaire adapted from that of the British Medical Research Council. Exposure was calculated as the average hours spent daily for cooking multiplied by the number of years. CAD were defined as either chronic airway obstruction (CAO; (forced expiratory volume in 1s/forced vital capacity)<0.70), chronic bronchitis, or chronic bronchitis with CAO. The prevalence of CAD in the exposed group was found to be higher than that in the LPG group (28.5% vs. 13.6%, crude odds ratios (ORs) 2.5 (1.5--4.0), P=0.0001). The fraction of CAD attributed to exposure to biomass smoke after adjusting for possible confounding factors was 23.1% (95% confidence interval (CI) 13.4--33.2). Acute symptoms during exposure to biomass smoke were important predictors for the presence of CAD. Biomass smoke pollution is an important contributing factor in the development of CAD in nonsmoking women living in a rural area. The presence of acute symptoms during cooking in women in rural areas should signal to general practitioners the possibility of CAD.

High mortality in diabetic recipients of high KDPI deceased donor kidneys.

PubMed

Pelletier, Ronald P; Pesavento, Todd E; Rajab, Amer; Henry, Mitchell L

2016-08-01

Deceased donor (DD) kidney quality is determined by calculating the Kidney Donor Profile Index (KDPI). Optimizing high KDPI (≥85%) DD transplant outcome is challenging. This retrospective study was performed to review our high KDPI DD transplant results to identify clinical practices that can improve future outcomes. We retrospectively calculated the KDPI for 895 DD kidney recipients transplanted between 1/2002 and 11/2013. Age, race, body mass index (BMI), retransplantation, gender, diabetes (DM), dialysis time, and preexisting coronary artery disease (CAD) (previous myocardial infarction (MI), coronary artery bypass (CABG), or stenting) were determined for all recipients. About 29.7% (266/895) of transplants were from donors with a KDPI ≥85%. By Cox regression older age, diabetes, female gender, and dialysis time >4 years correlated with shorter patient survival time. Diabetics with CAD who received a high KDPI donor kidney had a significantly increased risk of death (HR 4.33 (CI 1.82-10.30), P=.001) compared to low KDPI kidney recipients. The Kaplan-Meier survival curve for diabetic recipients of high KDPI kidneys was significantly worse if they had preexisting CAD (P<.001 by log-rank test). Patient survival using high KDPI donor kidneys may be improved by avoiding diabetic candidates with preexisting CAD. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Ultrasound based computer-aided-diagnosis of kidneys for pediatric hydronephrosis

NASA Astrophysics Data System (ADS)

Cerrolaza, Juan J.; Peters, Craig A.; Martin, Aaron D.; Myers, Emmarie; Safdar, Nabile; Linguraru, Marius G.

2014-03-01

Ultrasound is the mainstay of imaging for pediatric hydronephrosis, though its potential as diagnostic tool is limited by its subjective assessment, and lack of correlation with renal function. Therefore, all cases showing signs of hydronephrosis undergo further invasive studies, like diuretic renogram, in order to assess the actual renal function. Under the hypothesis that renal morphology is correlated with renal function, a new ultrasound based computer-aided diagnosis (CAD) tool for pediatric hydronephrosis is presented. From 2D ultrasound, a novel set of morphological features of the renal collecting systems and the parenchyma, is automatically extracted using image analysis techniques. From the original set of features, including size, geometric and curvature descriptors, a subset of ten features are selected as predictive variables, combining a feature selection technique and area under the curve filtering. Using the washout half time (T1/2) as indicative of renal obstruction, two groups are defined. Those cases whose T1/2 is above 30 minutes are considered to be severe, while the rest would be in the safety zone, where diuretic renography could be avoided. Two different classification techniques are evaluated (logistic regression, and support vector machines). Adjusting the probability decision thresholds to operate at the point of maximum sensitivity, i.e., preventing any severe case be misclassified, specificities of 53%, and 75% are achieved, for the logistic regression and the support vector machine classifier, respectively. The proposed CAD system allows to establish a link between non-invasive non-ionizing imaging techniques and renal function, limiting the need for invasive and ionizing diuretic renography.

Impact of inflammation, gene variants, and cigarette smoking on coronary artery disease risk.

PubMed

Merhi, Mahmoud; Demirdjian, Sally; Hariri, Essa; Sabbah, Nada; Youhanna, Sonia; Ghassibe-Sabbagh, Michella; Naoum, Joseph; Haber, Marc; Othman, Raed; Kibbani, Samer; Chammas, Elie; Kanbar, Roy; Bayeh, Hamid El; Chami, Youssef; Abchee, Antoine; Platt, Daniel E; Zalloua, Pierre; Khazen, Georges

2015-06-01

The role of inflammation in coronary artery disease (CAD) pathogenesis is well recognized. Moreover, smoking inhalation increases the activity of inflammatory mediators through an increase in leukotriene synthesis essential in atherosclerosis pathogenesis. The aim of this study is to investigate the effect of "selected" genetic variants within the leukotriene (LT) pathway and other variants on the development of CAD. CAD was detected by cardiac catheterization. Logistic regression was performed to investigate the association of smoking and selected susceptibility variants in the LT pathway including ALOX5AP, LTA4H, LTC4S, PON1, and LTA as well as CYP1A1 on CAD risk while controlling for age, gender, BMI, family history, diabetes, hyperlipidemia, and hypertension. rs4769874 (ALOX5AP), rs854560 (PON1), and rs4646903 (CYP1A1 MspI polymorphism) are significantly associated with an increased risk of CAD with respective odds ratios of 1.53703, 1.67710, and 1.35520; the genetic variant rs9579646 (ALOX5AP) is significantly associated with a decreased risk of CAD (OR 0.76163). Moreover, a significant smoking-gene interaction is determined with CYP1A1 MspI polymorphism rs4646903 and is associated with a decreased risk of CAD in current smokers (OR 0.52137). This study provides further evidence that genetic variation of the LT pathway, PON1, and CYP1A1 can modulate the atherogenic processes and eventually increase the risk of CAD in our study population. Moreover, it also shows the effect of smoking-gene interaction on CAD risk, where the CYP1A1 MspI polymorphism revealed a decreased risk in current smokers.

Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: the effect of surface treatments.

PubMed

Elsaka, Shaymaa E

2014-12-01

To evaluate the effect of different surface treatments on the microtensile bond strength (μTBS) of novel CAD/CAM restorative materials to self-adhesive resin cement. Two types of CAD/CAM restorative materials (Vita Enamic [VE] and Lava Ultimate [LU]) were used. The specimens were divided into five groups in each test according to the surface treatment performed; Gr 1 (control; no treatment), Gr 2 (sandblasted [SB]), Gr 3 (SB+silane [S]), Gr 4 (hydrofluoric acid [HF]), and Gr 5 (HF+S). A dual-curing self-adhesive resin cement (Bifix SE [BF]) was applied to each group for testing the adhesion after 24 h of storage in distilled water or after 30 days using the μTBS test. Following fracture testing, specimens were examined with a stereomicroscope and SEM. Surface roughness and morphology of the CAD/CAM restorative materials were characterized after treatment. Data were analyzed using ANOVA and Tukey's test. The surface treatment, type of CAD/CAM restorative material, and water storage periods showed a significant effect on the μTBS (p<0.001). For the LU/BF system, there was no significant difference in the bond strength values between different surface treatments (p>0.05). On the other hand, for the VE/BF system, surface treatment with HF+S showed higher bond strength values compared with SB and HF surface treatments (p<0.05). Surface roughness and SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. The effect of surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement is material dependent. The VE/BF CAD/CAM material provided higher bond strength values compared with the LU/BF CAD/CAM material.

2,4-Dichlorophenoxyacetic acid (2,4-D)- and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)-degrading gene cluster in the soybean root-nodulating bacterium Bradyrhizobium elkanii USDA94.

PubMed

Hayashi, Shohei; Sano, Tomoki; Suyama, Kousuke; Itoh, Kazuhito

2016-01-01

Herbicides 2,4-dichlorophenoxyacetic acid (2,4-D)- and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)-degrading Bradyrhizobium strains possess tfdAα and/or cadABC as degrading genes. It has been reported that root-nodulating bacteria belonging to Bradyrhizobium elkanii also have tfdAα and cadA like genes but lack the ability to degrade these herbicides and that the cadA genes in 2,4-D-degrading and non-degrading Bradyrhizobium are phylogenetically different. In this study, we identified cadRABCK in the genome of a type strain of soybean root-nodulating B. elkanii USDA94 and demonstrated that the strain could degrade the herbicides when cadABCK was forcibly expressed. cadABCK-cloned Escherichia coli also showed the degrading ability. Because co-spiked phenoxyacetic acid (PAA) could induce the degradation of 2,4-D in B. elkanii USDA94, the lack of degrading ability in this strain was supposed to be due to the low inducing potential of the herbicides for the degrading gene cluster. On the other hand, tfdAα from B. elkanii USDA94 showed little potential to degrade the herbicides, but it did for 4-chlorophenoxyacetic acid and PAA. The 2,4-D-degrading ability of the cad cluster and the inducing ability of PAA were confirmed by preparing cadA deletion mutant. This is the first study to demonstrate that the cad cluster in the typical root-nodulating bacterium indeed have the potential to degrade the herbicides, suggesting that degrading genes for anthropogenic compounds could be found in ordinary non-degrading bacteria. Copyright © 2016 Elsevier GmbH. All rights reserved.

Clinical significance of noninvasive coronary flow reserve assessment in patients with ischemic heart disease.

PubMed

Taqueti, Viviany R; Di Carli, Marcelo F

2016-11-01

The importance of physiologic assessments in ischemic heart disease is well recognized. Coronary flow reserve (CFR) is a novel physiologic imaging biomarker that complements both anatomic and semiquantitative perfusion assessments of coronary artery disease (CAD) severity. Beyond this, assessment of CFR may provide clinical insights useful for refining diagnosis, prognosis, and eventually, management of patients along the full range of ischemic heart disease phenotypes, from multivessel obstructive CAD to diffuse coronary microvascular dysfunction. We begin by defining the concept of noninvasive CFR, specifically focusing on quantification of blood flow using PET, for which robust observational data exist. Next, we describe the continuum of cardiovascular risk by CFR values in patients across the anatomic spectrum of CAD, including those with diabetes, chronic kidney disease, and nonobstructive CAD and coronary microvascular dysfunction. Finally, we summarize the impact of CFR on prognosis, with a focus on future directions for management strategies and potential novel therapies, particularly in patients with very low CFR and less obstructive CAD. This latter phenotype may provide a critical link to understanding hidden biological risk of ischemic heart disease in vulnerable populations, including women and patients with heart failure with preserved ejection fraction, metabolic syndrome, cardio-oncologic complications, and inflammatory-related disease.

Distortion of CAD-CAM-fabricated implant-fixed titanium and zirconia complete dental prosthesis frameworks.

PubMed

Al-Meraikhi, Hadi; Yilmaz, Burak; McGlumphy, Edwin; Brantley, William A; Johnston, William M

2018-01-01

Computer-aided design and computer-aided manufacturing (CAD-CAM)-fabricated titanium and zirconia implant-supported fixed dental prostheses have become increasingly popular for restoring patients with complete edentulism. However, the distortion level of these frameworks is not well known. The purpose of this in vitro study was to compare the 3-dimensional (3D) distortion of CAD-CAM zirconia and titanium implant-fixed screw-retained complete dental prostheses. A master edentulous model with 4 implants at the positions of the maxillary first molars and canines was used. Multiunit abutments (Nobel Biocare) secured to the model were digitally scanned using scan bodies and a laboratory scanner (S600 ARTI; Zirkonzahn). Titanium (n=5) and zirconia (n=5) frameworks were milled using a CAD-CAM system (Zirkonzahn M1; Zirkonzahn). All frameworks were scanned using an industrial computed tomography (CT) scanner (Nikon/X-Tek XT H 225kV MCT Micro-Focus). The direct CT scans were reconstructed to generate standard tessellation language (STL) files. To calculate the 3D distortion of the frameworks, STL files of the CT scans were aligned to the CAD model using a sum of the least squares best-fit algorithm. Surface comparison points were placed on the CAD model on the midfacial aspect of all teeth. The 3D distortion of each direct scan to the CAD model was calculated. In addition, color maps of the scan-to-CAD comparison were constructed using a ±0.500 mm color scale range. Both materials exhibited distortion; however, no significant difference was found in the amount of distortion from the CAD model between the materials (P=.747). Absolute values of deviations from the CAD model were evident in the x and y plane and less so in the z direction. Zirconia and titanium frameworks showed similar 3D distortion compared with the CAD model for the tested CAD-CAM and implant systems. The distortion was more pronounced in the horizontal and sagittal plane than in the vertical plane. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Multi-scale analysis of the effect of nano-filler particle diameter on the physical properties of CAD/CAM composite resin blocks.

PubMed

Yamaguchi, Satoshi; Inoue, Sayuri; Sakai, Takahiko; Abe, Tomohiro; Kitagawa, Haruaki; Imazato, Satoshi

2017-05-01

The objective of this study was to assess the effect of silica nano-filler particle diameters in a computer-aided design/manufacturing (CAD/CAM) composite resin (CR) block on physical properties at the multi-scale in silico. CAD/CAM CR blocks were modeled, consisting of silica nano-filler particles (20, 40, 60, 80, and 100 nm) and matrix (Bis-GMA/TEGDMA), with filler volume contents of 55.161%. Calculation of Young's moduli and Poisson's ratios for the block at macro-scale were analyzed by homogenization. Macro-scale CAD/CAM CR blocks (3 × 3 × 3 mm) were modeled and compressive strengths were defined when the fracture loads exceeded 6075 N. MPS values of the nano-scale models were compared by localization analysis. As the filler size decreased, Young's moduli and compressive strength increased, while Poisson's ratios and MPS decreased. All parameters were significantly correlated with the diameters of the filler particles (Pearson's correlation test, r = -0.949, 0.943, -0.951, 0.976, p < 0.05). The in silico multi-scale model established in this study demonstrates that the Young's moduli, Poisson's ratios, and compressive strengths of CAD/CAM CR blocks can be enhanced by loading silica nanofiller particles of smaller diameter. CAD/CAM CR blocks by using smaller silica nano-filler particles have a potential to increase fracture resistance.

Simplified microstrip discontinuity modeling using the transmission line matrix method interfaced to microwave CAD

NASA Astrophysics Data System (ADS)

Thompson, James H.; Apel, Thomas R.

1990-07-01

A technique for modeling microstrip discontinuities is presented which is derived from the transmission line matrix method of solving three-dimensional electromagnetic problems. In this technique the microstrip patch under investigation is divided into an integer number of square and half-square (triangle) subsections. An equivalent lumped-element model is calculated for each subsection. These individual models are then interconnected as dictated by the geometry of the patch. The matrix of lumped elements is then solved using either of two microwave CAD software interfaces with each port properly defined. Closed-form expressions for the lumped-element representation of the individual subsections is presented and experimentally verified through the X-band frequency range. A model demonstrating the use of symmetry and block construction of a circuit element is discussed, along with computer program development and CAD software interface.

Effect of serotonin on the expression of antigens and DNA levels in Yersinia pestis cells with different plasmid content

NASA Astrophysics Data System (ADS)

Klueva, Svetlana N.; Korsukov, Vladimir N.; Schukovskaya, Tatyana N.; Kravtsov, Alexander L.

2004-08-01

Using flow cytometry (FCM) the influence of exogenous serotonin on culture growth, DNA content and fluorescence intensity of cells binding FITC-labelled plague polyclonal immunoglobulins was studied in Yersinia pestis EV (pFra+, pCad+, pPst+), Yersinia pestis KM218 (pFra-, pCad-, pPst-), Yersinia pestis KM 216 (pFra-, pCad-, pPst+). The results have been obtained by FCM showed serotonin accelerated Yersinia pestis EV (pFra+, pCad+, pPst+), Yersinia pestis KM218 (pFra-, pCad-, pPst-) culture growth during cultivation in Hottinger broth pH 7.2 at 28°C at concentration of 10-5 M. The presence of 10-5 M serotonin in nutrient broth could modulate DNA content in 37°C growing population of plague microbe independently of their plasmid content. Serotonin have been an impact on the distribution pattern of the cells according to their phenotypical characteristics, which was reflected in the levels of population heterogeneity in the intensity of specific immunofluorescence determined by FMC.

Direct costs and cost-effectiveness of dual-source computed tomography and invasive coronary angiography in patients with an intermediate pretest likelihood for coronary artery disease.

PubMed

Dorenkamp, Marc; Bonaventura, Klaus; Sohns, Christian; Becker, Christoph R; Leber, Alexander W

2012-03-01

The study aims to determine the direct costs and comparative cost-effectiveness of latest-generation dual-source computed tomography (DSCT) and invasive coronary angiography for diagnosing coronary artery disease (CAD) in patients suspected of having this disease. The study was based on a previously elaborated cohort with an intermediate pretest likelihood for CAD and on complementary clinical data. Cost calculations were based on a detailed analysis of direct costs, and generally accepted accounting principles were applied. Based on Bayes' theorem, a mathematical model was used to compare the cost-effectiveness of both diagnostic approaches. Total costs included direct costs, induced costs and costs of complications. Effectiveness was defined as the ability of a diagnostic test to accurately identify a patient with CAD. Direct costs amounted to €98.60 for DSCT and to €317.75 for invasive coronary angiography. Analysis of model calculations indicated that cost-effectiveness grew hyperbolically with increasing prevalence of CAD. Given the prevalence of CAD in the study cohort (24%), DSCT was found to be more cost-effective than invasive coronary angiography (€970 vs €1354 for one patient correctly diagnosed as having CAD). At a disease prevalence of 49%, DSCT and invasive angiography were equally effective with costs of €633. Above a threshold value of disease prevalence of 55%, proceeding directly to invasive coronary angiography was more cost-effective than DSCT. With proper patient selection and consideration of disease prevalence, DSCT coronary angiography is cost-effective for diagnosing CAD in patients with an intermediate pretest likelihood for it. However, the range of eligible patients may be smaller than previously reported.

The effect of anti-rheumatic medications for coronary artery diseases risk in patients with rheumatoid arthritis might be changed over time: A nationwide population-based cohort study

PubMed Central

Lin, Lichi; Chen, Chyong-Mei; Chiou, Jeng-Yuan; Wang, Yu-Hsun; Wang, Paul Yung-Pou; Wei, James Cheng-Chung

2017-01-01

Objectives To determine whether anti-rheumatic drug usage is associated with risk of coronary artery diseases (CAD) in incident Rheumatoid Arthritis (RA) patients. Methods Data were obtained from the Taiwan National Health Insurance Research Database. The study cohort comprised 6260 patients who were newly diagnosed with RA between 2001–2010. The study endpoint was occurrence of CAD according to the ICD-9-CM codes. We used the WHO Defined Daily Dose (DDD) as a tool to assess the drugs exposure. The Cox proportional hazards regression model was used to estimate the hazard ratio (HR) of disease after controlling for demographic and other co-morbidities. When the proportionality assumption is violated, a spline curve of the Scaled Schoenfeld residuals is fitted to demonstrate the estimated effect on CAD over time for drug usage. Results Among RA patients, use of celecoxib, and etoricoxib was associated with significantly decreased incidence of CAD. The adjusted HR(95% CI) of CAD for low-dose celecoxib (DDD≦1) and high-dose user were 0.47(0.34, 0.65) and 0.37(0.24, 0.58) during the 4 year follow-up time; however, it became 0.98(0.70, 1.37) and1.29(0.85, 1.95). Adjusted HR(95% CI) of CAD for etoricoxib users remained 0.47(0.26, 0.84). Conclusions This study revealed association of decreased CAD risk in RA patients taking 2 different kinds of COX-2i in comparison with nonusers. The effect might be changed over time, after about 4 years. PMID:28658301

Feasibility and Safety of Evaluating Patients with Prior Coronary Artery Disease Using an Accelerated Diagnostic Algorithm in a Chest Pain Unit

PubMed Central

Goldkorn, Ronen; Goitein, Orly; Ben-Zekery, Sagit; Shlomo, Nir; Narodetsky, Michael; Livne, Moran; Sabbag, Avi; Asher, Elad; Matetzky, Shlomi

2016-01-01

An accelerated diagnostic protocol for evaluating low-risk patients with acute chest pain in a cardiologist-based chest pain unit (CPU) is widely employed today. However, limited data exist regarding the feasibility of such an algorithm for patients with a history of prior coronary artery disease (CAD). The aim of the current study was to assess the feasibility and safety of evaluating patients with a history of prior CAD using an accelerated diagnostic protocol. We evaluated 1,220 consecutive patients presenting with acute chest pain and hospitalized in our CPU. Patients were stratified according to whether they had a history of prior CAD or not. The primary composite outcome was defined as a composite of readmission due to chest pain, acute coronary syndrome, coronary revascularization, or death during a 60-day follow-up period. Overall, 268 (22%) patients had a history of prior CAD. Non-invasive evaluation was performed in 1,112 (91%) patients. While patients with a history of prior CAD had more comorbidities, the two study groups were similar regarding hospitalization rates (9% vs. 13%, p = 0.08), coronary angiography (13% vs. 11%, p = 0.41), and revascularization (6.5% vs. 5.7%, p = 0.8) performed during CPU evaluation. At 60-days the primary endpoint was observed in 12 (1.6%) and 6 (3.2%) patients without and with a history of prior CAD, respectively (p = 0.836). No mortalities were recorded. To conclude, Patients with a history of prior CAD can be expeditiously and safely evaluated using an accelerated diagnostic protocol in a CPU with outcomes not differing from patients without such a history. PMID:27669521

An interactive system for computer-aided diagnosis of breast masses.

PubMed

Wang, Xingwei; Li, Lihua; Liu, Wei; Xu, Weidong; Lederman, Dror; Zheng, Bin

2012-10-01

Although mammography is the only clinically accepted imaging modality for screening the general population to detect breast cancer, interpreting mammograms is difficult with lower sensitivity and specificity. To provide radiologists "a visual aid" in interpreting mammograms, we developed and tested an interactive system for computer-aided detection and diagnosis (CAD) of mass-like cancers. Using this system, an observer can view CAD-cued mass regions depicted on one image and then query any suspicious regions (either cued or not cued by CAD). CAD scheme automatically segments the suspicious region or accepts manually defined region and computes a set of image features. Using content-based image retrieval (CBIR) algorithm, CAD searches for a set of reference images depicting "abnormalities" similar to the queried region. Based on image retrieval results and a decision algorithm, a classification score is assigned to the queried region. In this study, a reference database with 1,800 malignant mass regions and 1,800 benign and CAD-generated false-positive regions was used. A modified CBIR algorithm with a new function of stretching the attributes in the multi-dimensional space and decision scheme was optimized using a genetic algorithm. Using a leave-one-out testing method to classify suspicious mass regions, we compared the classification performance using two CBIR algorithms with either equally weighted or optimally stretched attributes. Using the modified CBIR algorithm, the area under receiver operating characteristic curve was significantly increased from 0.865 ± 0.006 to 0.897 ± 0.005 (p < 0.001). This study demonstrated the feasibility of developing an interactive CAD system with a large reference database and achieving improved performance.

The impact of artificially caries-affected dentin on bond strength of multi-mode adhesives

PubMed Central

Follak, Andressa Cargnelutti; Miotti, Leonardo Lamberti; Lenzi, Tathiane Larissa; Rocha, Rachel de Oliveira; Maxnuck Soares, Fabio Zovico

2018-01-01

Aim: The aim of this study is to evaluate the impact of dentin condition on bond strength of multi-mode adhesive systems (MMAS) to sound and artificially induced caries-affected dentin (CAD). Methods: Flat dentin surfaces of 112 bovine incisors were assigned to 16 subgroups (n = 7) according to the substrate condition (sound and CAD– pH-cycling for 14 days); adhesive systems (Scotchbond Universal, All-Bond Universal, Prime and Bond Elect, Adper Single Bond Plus and Clearfil SE Bond) and etching strategy (etch-and-rinse and self-etch). All systems were applied according to the manufacturer's instructions, and resin composite restorations were built. After 24 h of water storage, specimens were sectioned (0.8 mm2) and submitted to the microtensile test. Statistical Analysis: Data (MPa) were analyzed using three-way analysis of variance and Tukey's test (α = 0.05). Results: MMAS presented similar bond strength values, regardless etching strategy in each substrate condition. Bond strength values were lower when MMAS were applied to CAD in the etch-and-rinse strategy. Conclusion: The etching strategy did not influence the bond strength of MMAS to sound or CAD, considering each substrate separately. However, CAD impact negatively on bond strength of MMAS in etch-and rinse mode. PMID:29674813

Longitudinal evaluation of the skin microbiome and association with microenvironment and treatment in canine atopic dermatitis

PubMed Central

Bradley, Charles W.; Morris, Daniel O.; Rankin, Shelley C.; Cain, Christine L.; Misic, Ana M.; Houser, Timothy; Mauldin, Elizabeth A.; Grice, Elizabeth A.

2016-01-01

Host-microbe interactions may play a fundamental role in the pathogenesis of atopic dermatitis (AD), a chronic relapsing inflammatory skin disorder characterized by universal colonization with Staphylococcus. To examine the relationship between epidermal barrier function and the cutaneous microbiota in AD, this study employed a spontaneous model of canine AD (cAD). In a cohort of 14 dogs with cAD, the skin microbiota was longitudinally evaluated with parallel assessment of skin barrier function at disease flare, during antimicrobial therapy and posttherapy. Sequencing of the bacterial 16S ribosomal RNA gene revealed decreased bacterial diversity and increased proportions of Staphylococcus (S. pseudintermedius in particular) and Corynebacterium in comparison to a cohort of healthy control dogs (n=16). Treatment restored bacterial diversity with decreased Staphylococcus proportions, concurrent with decreased cAD severity. Skin barrier function, as measured by corneometry, pH, and transepidermal water loss (TEWL) also normalized with treatment. Bacterial diversity correlated with TEWL and pH, but not corneometry. These findings provide insights into the relationship between the cutaneous microbiome and skin barrier function in AD, the impact of antimicrobial therapy on the skin microbiome, and highlight the utility of cAD as a spontaneous non-rodent model of AD. PMID:26854488

Airplane Mesh Development with Grid Density Studies

NASA Technical Reports Server (NTRS)

Cliff, Susan E.; Baker, Timothy J.; Thomas, Scott D.; Lawrence, Scott L.; Rimlinger, Mark J.

1999-01-01

Automatic Grid Generation Wish List Geometry handling, including CAD clean up and mesh generation, remains a major bottleneck in the application of CFD methods. There is a pressing need for greater automation in several aspects of the geometry preparation in order to reduce set up time and eliminate user intervention as much as possible. Starting from the CAD representation of a configuration, there may be holes or overlapping surfaces which require an intensive effort to establish cleanly abutting surface patches, and collections of many patches may need to be combined for more efficient use of the geometrical representation. Obtaining an accurate and suitable body conforming grid with an adequate distribution of points throughout the flow-field, for the flow conditions of interest, is often the most time consuming task for complex CFD applications. There is a need for a clean unambiguous definition of the CAD geometry. Ideally this would be carried out automatically by smart CAD clean up software. One could also define a standard piece-wise smooth surface representation suitable for use by computational methods and then create software to translate between the various CAD descriptions and the standard representation. Surface meshing remains a time consuming, user intensive procedure. There is a need for automated surface meshing, requiring only minimal user intervention to define the overall density of mesh points. The surface mesher should produce well shaped elements (triangles or quadrilaterals) whose size is determined initially according to the surface curvature with a minimum size for flat pieces, and later refined by the user in other regions if necessary. Present techniques for volume meshing all require some degree of user intervention. There is a need for fully automated and reliable volume mesh generation. In addition, it should be possible to create both surface and volume meshes that meet guaranteed measures of mesh quality (e.g. minimum and maximum angle, stretching ratios, etc.).

Elastic properties and apparent density of human edentulous maxilla and mandible

PubMed Central

Seong, Wook-Jin; Kim, Uk-Kyu; Swift, James Q.; Heo, Young-Cheul; Hodges, James S.; Ko, Ching-Chang

2009-01-01

The aim of this study aim was to determine whether elastic properties and apparent density of bone differ in different anatomical regions of the maxilla and mandible. Additional analyses assessed how elastic properties and apparent density were related. Four pairs of edentulous maxilla and mandibles were retrieved from fresh human cadavers. Bone samples from four anatomical regions (maxillary anterior, maxillary posterior, mandibular anterior, mandibular posterior) were obtained. Elastic modulus (EM) and hardness (H) were measured using the nano-indentation technique. Bone samples containing cortical and trabecular bone were used to measure composite apparent density (cAD) using Archimedes’ principle. Statistical analyses used repeated measures ANOVA and Pearson correlations. Bone physical properties differed between regions of the maxilla and mandible. Generally, mandible had higher physical property measurements than maxilla. EM and H were higher in posterior than in anterior regions; the reverse was true for cAD. Posterior maxillary cAD was significantly lower than that in the three other regions. PMID:19647417

Elastic properties and apparent density of human edentulous maxilla and mandible.

PubMed

Seong, W-J; Kim, U-K; Swift, J Q; Heo, Y-C; Hodges, J S; Ko, C-C

2009-10-01

The aim of this study was to determine whether elastic properties and apparent density of bone differ in different anatomical regions of the maxilla and mandible. Additional analyses assessed how elastic properties and apparent density were related. Four pairs of edentulous maxilla and mandibles were retrieved from fresh human cadavers. Bone samples from four anatomical regions (maxillary anterior, maxillary posterior, mandibular anterior, mandibular posterior) were obtained. Elastic modulus (EM) and hardness (H) were measured using the nano-indentation technique. Bone samples containing cortical and trabecular bone were used to measure composite apparent density (cAD) using Archimedes' principle. Statistical analyses used repeated measures ANOVA and Pearson correlations. Bone physical properties differed between regions of the maxilla and mandible. Generally, mandible had higher physical property measurements than maxilla. EM and H were higher in posterior than in anterior regions; the reverse was true for cAD. Posterior maxillary cAD was significantly lower than that in the three other regions.

Kinematic optimization of upgrade to the Hobby-Eberly Telescope through novel use of commercially available three-dimensional CAD package

NASA Astrophysics Data System (ADS)

Wedeking, Gregory A.; Zierer, Joseph J.; Jackson, John R.

2010-07-01

The University of Texas, Center for Electromechanics (UT-CEM) is making a major upgrade to the robotic tracking system on the Hobby Eberly Telescope (HET) as part of theWide Field Upgrade (WFU). The upgrade focuses on a seven-fold increase in payload and necessitated a complete redesign of all tracker supporting structure and motion control systems, including the tracker bridge, ten drive systems, carriage frames, a hexapod, and many other subsystems. The cost and sensitivity of the scientific payload, coupled with the tracker system mass increase, necessitated major upgrades to personnel and hardware safety systems. To optimize kinematic design of the entire tracker, UT-CEM developed novel uses of constraints and drivers to interface with a commercially available CAD package (SolidWorks). For example, to optimize volume usage and minimize obscuration, the CAD software was exercised to accurately determine tracker/hexapod operational space needed to meet science requirements. To verify hexapod controller models, actuator travel requirements were graphically measured and compared to well defined equations of motion for Stewart platforms. To ensure critical hardware safety during various failure modes, UT-CEM engineers developed Visual Basic drivers to interface with the CAD software and quickly tabulate distance measurements between critical pieces of optical hardware and adjacent components for thousands of possible hexapod configurations. These advances and techniques, applicable to any challenging robotic system design, are documented and describe new ways to use commercially available software tools to more clearly define hardware requirements and help insure safe operation.

Circulating irisin levels are lower in patients with either stable coronary artery disease (CAD) or myocardial infarction (MI) versus healthy controls, whereas follistatin and activin A levels are higher and can discriminate MI from CAD with similar to CK-MB accuracy.

PubMed

Anastasilakis, Athanasios D; Koulaxis, Dimitrios; Kefala, Nikoleta; Polyzos, Stergios A; Upadhyay, Jagriti; Pagkalidou, Eirini; Economou, Fotios; Anastasilakis, Chrysostomos D; Mantzoros, Christos S

2017-08-01

Several myokines are produced by cardiac muscle. We investigated changes in myokine levels at the time of acute myocardial infarction (MI) and following reperfusion in relation to controls. Patients with MI (MI Group, n=31) treated with percutaneous coronary intervention (PCI) were compared to patients with stable coronary artery disease (CAD) subjected to scheduled PCI (CAD Group, n=40) and controls with symptoms mimicking CAD without stenosis in angiography (Control Group, n=43). The number and degree of stenosis were recorded. Irisin, follistatin, follistatin-like 3, activin A and B, ALT, AST, CK and CK-MB were measured at baseline and 6 or 24h after the intervention. MI and CAD patients had lower irisin than controls (p<0.001). MI patients had higher follistatin, activin A, CK, CK-MB and AST than CAD patients and controls (all p≤0.001). None of the myokines changed following reperfusion. Circulating irisin was associated with the degree of stenosis in all patients (p=0.05). Irisin was not inferior to CK-MB in predicting MI while folistatin and activin A could discriminate MI from CAD patients with similar to CK-MB accuracy. None of these myokines was altered following PCI in contrast to CK-MB. Irisin levels are lower in MI and CAD implying that their production may depend on myocadial blood supply. Follistatin and activin A are higher in MI than in CAD suggesting increased release due to myocardial necrosis. They can predict MI with accuracy similar to CK-MB and their role in the diagnosis of MI remains to be confirmed by prospective large clinical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Light irradiance through novel CAD-CAM block materials and degree of conversion of composite cements.

PubMed

Lise, Diogo Pedrollo; Van Ende, Annelies; De Munck, Jan; Yoshihara, Kumiko; Nagaoka, Noriyuki; Cardoso Vieira, Luiz Clovis; Van Meerbeek, Bart

2018-02-01

To assess light irradiance (LI) delivered by two light-curing units (LCU's) and to measure the degree of conversion (DC) of three composite cements, when cured through different thicknesses of two novel CAD-CAM block materials. 100-μm-thick films of a dual-curable composite cement (G-CEM LinkAce, GC), a light-curable flowable resin-based composite (RBC) (G-ænial Universal Flo, GC) and a micro-hybrid RBC (G-ænial Posterior, GC) were investigated as luting agents. Two 'polymer-ceramic' CAD-CAM blocks (Cerasmart, GC; Enamic, Vita Zahnfabrik) were sectioned in slabs with different thicknesses (1, 3 and 5mm). LI at the bottom of the specimens was measured using a calibrated spectrometer, while being light-cured through the CAD-CAM block slabs for 40s with a low- (±500mW/cm 2 ) or high- (±1,600mW/cm 2 ) irradiance LCU (n=5). After light-curing, micro-Raman spectra of the composite films were acquired to determine DC at 5min, 10min, 1h and 24h. LI data were statistically analyzed by Kruskal-Wallis followed by post-hoc comparisons, while a linear mixed-effect model was applied for the DC analysis. In addition, the CAD-CAM blocks ultrastructure was characterized upon argon-ion slicing using scanning transmission electron microscopy (STEM). Finally, light transmission (LT) through each CAD-CAM block material was assessed using a spectrophotometer. Curing-light attenuation and DC were significantly influenced by thickness and type of the overlying material. LCU only had a significant effect on DC of the micro-hybrid RBC. DC significantly increased over time for all composite cements. CAD-CAM block structural analysis revealed a relatively small and homogenous filler configuration (mean filler size of 0.2-0.5μm) for Cerasmart, while Enamic contained ceramic grains varying in shape and size (1-10μm), which were interconnected by the polymer-based network. LT was much higher at a wavelength range of 300-800nm for Cerasmart than for Enamic. Light-curable composite cements can be cured through a restoration up to 2.7-mm thickness, depending on the kind of CAD-CAM material. A high-irradiance LCU only has a limited effect on the maximum thickness of the polymer-ceramic CAD-CAM material that can be cured through. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Mutant DD genotype of NFKB1 gene is associated with the susceptibility and severity of coronary artery disease.

PubMed

Luo, Jun-Yi; Li, Xiao-Mei; Zhou, Yun; Zhao, Qiang; Chen, Bang-Dang; Liu, Fen; Chen, Xiao-Cui; Zheng, Hong; Ma, Yi-Tong; Gao, Xiao-Ming; Yang, Yi-Ning

2017-02-01

Nuclear factor κappa B (NF-κB) is an important transcription factor in the development and progression of coronary artery disease (CAD). Recent evidence suggests that -94 ATTG ins/del mutant in the promoter of NFKB1 gene is an essential functional mutant. The present study demonstrated the frequencies of the del/del (DD) genotype and del (D) allele were significantly higher in CAD patients than in controls. CAD patients carrying mutant DD genotype had worse stenosis of diseased coronary arteries compared to those carrying ins/ins (II) or ins/del (ID) genotype. Plasma levels of endothelial nitric oxide synthase (eNOS) were lower, while inflammatory cytokine incnterlukin-6 (IL-6) was higher in CAD patients with DD genotype than those with II or ID genotype (both P<0.05). In vitro study showed that mutant human umbilical vein endothelial cells (DD genotype HUVECs) were more susceptible to H 2 O 2 -induced apoptosis, which was accompanied with a decreased Bcl-2 expression. Further, mutant HUVECs had lower eNOS but higher IL-6 mRNA levels and decreased phosphorylation of eNOS under H 2 O 2 -stimulation (both P<0.05). Compared to wild type cells (II genotype), significantly downregulated protein expression of total NF-κB p50 subunit were observed in mutant HUVECs with or without oxidative stress, and a lower expression of unclear p50 was associated with a decreased p50 nuclear translocation in mutant HUVECs versus wild type cells under H 2 O 2 -stimulation (both P<0.05). In conclusion, mutant DD genotype of NFKB1 gene is associated with the risk and severity of CAD. Dwonregulation of NF-κB p50 subunit leads to exacerbated endothelial dysfunction and apoptosis and enhanced inflammatory response that is the potential underlying mechanism. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic.

PubMed

Leung, Brian T W; Tsoi, James K H; Matinlinna, Jukka P; Pow, Edmond H N

2015-09-01

Fluorophlogopite glass ceramic (FGC) is a biocompatible, etchable, and millable ceramic with fluoride releasing property. However, its mechanical properties and reliability compared with other machinable ceramics remain undetermined. The purpose of this in vitro study was to compare the mechanical properties of 3 commercially available millable ceramic materials, IPS e.max CAD, Vitablocs Mark II, and Vita Enamic, with an experimental FGC. Each type of ceramic block was sectioned into beams (n=15) of standard dimensions of 2×2×15 mm. Before mechanical testing, specimens of the IPS e.max CAD group were further fired for final crystallization. Flexural strength was determined by the 3-point bend test with a universal loading machine at a cross head speed of 1 mm/min. Hardness was determined with a hardness tester with 5 Vickers hardness indentations (n=5) using a 1.96 N load and a dwell time of 15 seconds. Selected surfaces were examined by scanning electron microscopy and energy-dispersive x-ray spectroscopy. Data were analyzed by the 1-way ANOVA test and Weibull analysis (α=.05). Weibull parameters, including the Weibull modulus (m) as well as the characteristic strength at 63.2% (η) and 10.0% (B10), were obtained. A significant difference in flexural strength (P<.001) was found among groups, with IPS e.max CAD (341.88 ±40.25 MPa)>Vita Enamic (145.95 ±12.65 MPa)>Vitablocs Mark II (106.67 ±18.50 MPa), and FGC (117.61 ±7.62 MPa). The Weibull modulus ranged from 6.93 to 18.34, with FGC showing the highest Weibull modulus among the 4 materials. The Weibull plot revealed that IPS e.max CAD>Vita Enamic>FGC>Vitablocs Mark II for the characteristic strength at both 63.2% (η) and 10.0% (B10). Significant difference in Vickers hardness among groups (P<.001) was found with IPS e.max CAD (731.63 ±30.64 H(V))>Vitablocs Mark II (594.74 ±25.22 H(V))>Vita Enamic (372.29 ±51.23 H(V))>FGC (153.74 ±23.62 H(V)). The flexural strength and Vickers hardness of IPS e.max CAD were significantly higher than those of the 3 materials tested. The FGC's flexural strength was comparable with Vitablocs Mark II. The FGC's Weibull modulus was the highest, while its Vickers hardness was the lowest among the materials tested. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Retention Strength of PMMA/UDMA-Based Crowns Bonded to Dentin: Impact of Different Coupling Agents for Pretreatment

PubMed Central

Stawarczyk, Bogna; Teuss, Simona; Eichberger, Marlis; Roos, Malgorzata; Keul, Christine

2015-01-01

Computer aided design/computer aided manufacturing (CAD/CAM) polymers for long-term dental restorations benefit from enhanced mechanical properties. However, the quantification of their bonding properties on teeth is lacking. Therefore, the aim of this study was to determine the retention strength (RS) of differently pretreated new developed polymethylmethacrylate/urethanedimethacrylate-based CAD/CAM polymer bonded on dentin. In summary, 120 human caries-free molars were prepared, and polymeric crowns were milled and pretreated (n = 20): visio.link (VL), Scotchbond Universal (SU), Monobond Plus/Heliobond (MH), Margin Bond (MB), Margin Bond mixed with acetone (1:1) (MBA) or not pretreated (CG). Half of the specimens were cemented using Variolink II and the other half with RelyX Ultimate. Specimens were stored for 24 h in distilled water and thermal cycled (5000 ×, 5 °C/55 °C). The retention load was measured and failure types were defined. RS was calculated and analyzed using both two- and one-way ANOVA with a post-hoc Scheffé-test, unpaired t-test, Kaplan–Meier with Breslow–Gehan test and chi-squared test (p < 0.05). Crowns bonded using RelyX Ultimate showed higher RS than those bonded using Variolink II. The pretreatment showed no impact on the RS. However, survival analysis within Variolink II found an impact of pretreatment. The median RS for MH was the lowest and statistically different from MB, MBA and CG. For Variolink II MH had the poorest survival as the estimated cumulative failure function of the debonded crown increased very quickly with increasing TBS. Within the RelyX Ultimate groups, no significant differences were determined. The newly developed CAD/CAM polymer showed the highest bonding properties after cementation using RelyX Ultimate. PMID:28793651

Computer Aided Detection (CAD) Systems for Mammography and the Use of GRID in Medicine

NASA Astrophysics Data System (ADS)

Lauria, Adele

It is well known that the most effective way to defeat breast cancer is early detection, as surgery and medical therapies are more efficient when the disease is diagnosed at an early stage. The principal diagnostic technique for breast cancer detection is X-ray mammography. Screening programs have been introduced in many European countries to invite women to have periodic radiological breast examinations. In such screenings, radiologists are often required to examine large numbers of mammograms with a double reading, that is, two radiologists examine the images independently and then compare their results. In this way an increment in sensitivity (the rate of correctly identified images with a lesion) of up to 15% is obtained.1,2 In most radiological centres, it is a rarity to find two radiologists to examine each report. In recent years different Computer Aided Detection (CAD) systems have been developed as a support to radiologists working in mammography: one may hope that the "second opinion" provided by CAD might represent a lower cost alternative to improve the diagnosis. At present, four CAD systems have obtained the FDA approval in the USA. † Studies3,4 show an increment in sensitivity when CAD systems are used. Freer and Ulissey in 2001 5 demonstrated that the use of a commercial CAD system (ImageChecker M1000, R2 Technology) increases the number of cancers detected up to 19.5% with little increment in recall rate. Ciatto et al.,5 in a study simulating a double reading with a commercial CAD system (SecondLook‡), showed a moderate increment in sensitivity while reducing specificity (the rate of correctly identified images without a lesion). Notwithstanding these optimistic results, there is an ongoing debate to define the advantages of the use of CAD as second reader: the main limits underlined, e.g., by Nishikawa6 are that retrospective studies are considered much too optimistic and that clinical studies must be performed to demonstrate a statistically significant benefit from the use of CAD.

Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques.

PubMed

Vojdani, M; Torabi, K; Farjood, E; Khaledi, Aar

2013-09-01

Metal-ceramic crowns are most commonly used as the complete coverage restorations in clinical daily use. Disadvantages of conventional hand-made wax-patterns introduce some alternative ways by means of CAD/CAM technologies. This study compares the marginal and internal fit of copings cast from CAD/CAM and conventional fabricated wax-patterns. Twenty-four standardized brass dies were prepared and randomly divided into 2 groups according to the wax-patterns fabrication method (CAD/CAM technique and conventional method) (n=12). All the wax-patterns were fabricated in a standard fashion by means of contour, thickness and internal relief (M1-M12: representative of CAD/CAM group, C1-C12: representative of conventional group). CAD/CAM milling machine (Cori TEC 340i; imes-icore GmbH, Eiterfeld, Germany) was used to fabricate the CAD/CAM group wax-patterns. The copings cast from 24 wax-patterns were cemented to the corresponding dies. For all the coping-die assemblies cross-sectional technique was used to evaluate the marginal and internal fit at 15 points. The Student's t- test was used for statistical analysis (α=0.05). The overall mean (SD) for absolute marginal discrepancy (AMD) was 254.46 (25.10) um for CAD/CAM group and 88.08(10.67) um for conventional group (control). The overall mean of internal gap total (IGT) was 110.77(5.92) um for CAD/CAM group and 76.90 (10.17) um for conventional group. The Student's t-test revealed significant differences between 2 groups. Marginal and internal gaps were found to be significantly higher at all measured areas in CAD/CAM group than conventional group (p< 0.001). Within limitations of this study, conventional method of wax-pattern fabrication produced copings with significantly better marginal and internal fit than CAD/CAM (machine-milled) technique. All the factors for 2 groups were standardized except wax pattern fabrication technique, therefore, only the conventional group results in copings with clinically acceptable margins of less than 120um.

Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques

PubMed Central

Vojdani, M; Torabi, K; Farjood, E; Khaledi, AAR

2013-01-01

Statement of Problem: Metal-ceramic crowns are most commonly used as the complete coverage restorations in clinical daily use. Disadvantages of conventional hand-made wax-patterns introduce some alternative ways by means of CAD/CAM technologies. Purpose: This study compares the marginal and internal fit of copings cast from CAD/CAM and conventional fabricated wax-patterns. Materials and Method: Twenty-four standardized brass dies were prepared and randomly divided into 2 groups according to the wax-patterns fabrication method (CAD/CAM technique and conventional method) (n=12). All the wax-patterns were fabricated in a standard fashion by means of contour, thickness and internal relief (M1-M12: representative of CAD/CAM group, C1-C12: representative of conventional group). CAD/CAM milling machine (Cori TEC 340i; imes-icore GmbH, Eiterfeld, Germany) was used to fabricate the CAD/CAM group wax-patterns. The copings cast from 24 wax-patterns were cemented to the corresponding dies. For all the coping-die assemblies cross-sectional technique was used to evaluate the marginal and internal fit at 15 points. The Student’s t- test was used for statistical analysis (α=0.05). Results: The overall mean (SD) for absolute marginal discrepancy (AMD) was 254.46 (25.10) um for CAD/CAM group and 88.08(10.67) um for conventional group (control). The overall mean of internal gap total (IGT) was 110.77(5.92) um for CAD/CAM group and 76.90 (10.17) um for conventional group. The Student’s t-test revealed significant differences between 2 groups. Marginal and internal gaps were found to be significantly higher at all measured areas in CAD/CAM group than conventional group (p< 0.001). Conclusion: Within limitations of this study, conventional method of wax-pattern fabrication produced copings with significantly better marginal and internal fit than CAD/CAM (machine-milled) technique. All the factors for 2 groups were standardized except wax pattern fabrication technique, therefore, only the conventional group results in copings with clinically acceptable margins of less than 120um. PMID:24724133

Structural and Kinetic Basis for Substrate Selectivity in Populus tremuloides Sinapyl Alcohol Dehydrogenase

PubMed Central

Bomati, Erin K.; Noel, Joseph P.

2005-01-01

We describe the three-dimensional structure of sinapyl alcohol dehydrogenase (SAD) from Populus tremuloides (aspen), a member of the NADP(H)-dependent dehydrogenase family that catalyzes the last reductive step in the formation of monolignols. The active site topology revealed by the crystal structure substantiates kinetic results indicating that SAD maintains highest specificity for the substrate sinapaldehyde. We also report substantial substrate inhibition kinetics for the SAD-catalyzed reduction of hydroxycinnamaldehydes. Although SAD and classical cinnamyl alcohol dehydrogenases (CADs) catalyze the same reaction and share some sequence identity, the active site topology of SAD is strikingly different from that predicted for classical CADs. Kinetic analyses of wild-type SAD and several active site mutants demonstrate the complexity of defining determinants of substrate specificity in these enzymes. These results, along with a phylogenetic analysis, support the inclusion of SAD in a plant alcohol dehydrogenase subfamily that includes cinnamaldehyde and benzaldehyde dehydrogenases. We used the SAD three-dimensional structure to model several of these SAD-like enzymes, and although their active site topologies largely mirror that of SAD, we describe a correlation between substrate specificity and amino acid substitution patterns in their active sites. The SAD structure thus provides a framework for understanding substrate specificity in this family of enzymes and for engineering new enzyme specificities. PMID:15829607

Structural and kinetic basis for substrate selectivity in Populus tremuloides sinapyl alcohol dehydrogenase.

PubMed

Bomati, Erin K; Noel, Joseph P

2005-05-01

We describe the three-dimensional structure of sinapyl alcohol dehydrogenase (SAD) from Populus tremuloides (aspen), a member of the NADP(H)-dependent dehydrogenase family that catalyzes the last reductive step in the formation of monolignols. The active site topology revealed by the crystal structure substantiates kinetic results indicating that SAD maintains highest specificity for the substrate sinapaldehyde. We also report substantial substrate inhibition kinetics for the SAD-catalyzed reduction of hydroxycinnamaldehydes. Although SAD and classical cinnamyl alcohol dehydrogenases (CADs) catalyze the same reaction and share some sequence identity, the active site topology of SAD is strikingly different from that predicted for classical CADs. Kinetic analyses of wild-type SAD and several active site mutants demonstrate the complexity of defining determinants of substrate specificity in these enzymes. These results, along with a phylogenetic analysis, support the inclusion of SAD in a plant alcohol dehydrogenase subfamily that includes cinnamaldehyde and benzaldehyde dehydrogenases. We used the SAD three-dimensional structure to model several of these SAD-like enzymes, and although their active site topologies largely mirror that of SAD, we describe a correlation between substrate specificity and amino acid substitution patterns in their active sites. The SAD structure thus provides a framework for understanding substrate specificity in this family of enzymes and for engineering new enzyme specificities.

Computer-aided diagnosis of lung cancer: definition and detection of ground-glass opacity type of nodules by high-resolution computed tomography.

PubMed

Okada, Tohru; Iwano, Shingo; Ishigaki, Takeo; Kitasaka, Takayuki; Hirano, Yasushi; Mori, Kensaku; Suenaga, Yasuhito; Naganawa, Shinji

2009-02-01

The ground-glass opacity (GGO) of lung cancer is identified only subjectively on computed tomography (CT) images as no quantitative characteristic has been defined for GGOs. We sought to define GGOs quantitatively and to differentiate between GGOs and solid-type lung cancers semiautomatically with a computer-aided diagnosis (CAD). High-resolution CT images of 100 pulmonary nodules (all peripheral lung cancers) were collected from our clinical records. Two radiologists traced the contours of nodules and distinguished GGOs from solid areas. The CT attenuation value of each area was measured. Differentiation between cancer types was assessed by a receiver-operating characteristic (ROC) analysis. The mean CT attenuation of the GGO areas was -618.4 +/- 212.2 HU, whereas that of solid areas was -68.1 +/- 230.3 HU. CAD differentiated between solidand GGO-type lung cancers with a sensitivity of 86.0% and specificity of 96.5% when the threshold value was -370 HU. Four nodules of mixed GGOs were incorrectly classified as the solid type. CAD detected 96.3% of GGO areas when the threshold between GGO and solid areas was 194 HU. Objective definition of GGO area by CT attenuation is feasible. This method is useful for semiautomatic differentiation between GGOs and solid types of lung cancer.

CAPRI (Computational Analysis PRogramming Interface): A Solid Modeling Based Infra-Structure for Engineering Analysis and Design Simulations

NASA Technical Reports Server (NTRS)

Haimes, Robert; Follen, Gregory J.

1998-01-01

CAPRI is a CAD-vendor neutral application programming interface designed for the construction of analysis and design systems. By allowing access to the geometry from within all modules (grid generators, solvers and post-processors) such tasks as meshing on the actual surfaces, node enrichment by solvers and defining which mesh faces are boundaries (for the solver and visualization system) become simpler. The overall reliance on file 'standards' is minimized. This 'Geometry Centric' approach makes multi-physics (multi-disciplinary) analysis codes much easier to build. By using the shared (coupled) surface as the foundation, CAPRI provides a single call to interpolate grid-node based data from the surface discretization in one volume to another. Finally, design systems are possible where the results can be brought back into the CAD system (and therefore manufactured) because all geometry construction and modification are performed using the CAD system's geometry kernel.

Metabolic Syndrome and Coronary Artery Disease in Ossabaw Compared with Yucatan Swine

PubMed Central

Neeb, Zachary P; Edwards, Jason M; Alloosh, Mouhamad; Long, Xin; Mokelke, Eric A; Sturek, Michael

2010-01-01

Metabolic syndrome (MetS), a compilation of associated risk factors, increases the risk of type 2 diabetes and coronary artery disease (CAD, atherosclerosis), which can progress to the point of artery occlusion. Stents are the primary interventional treatment for occlusive CAD, and patients with MetS and hyperinsulinemia have increased restenosis. Because of its thrifty genotype, the Ossabaw pig is a model of MetS. We tested the hypothesis that, when fed high-fat diet, Ossabaw swine develop more features of MetS, greater native CAD, and greater stent-induced CAD than do Yucatan swine. Animals of each breed were divided randomly into 2 groups and fed 2 different calorie-matched diets for 40 wk: control diet (C) and high-fat, high-cholesterol atherogenic diet (H). A bare metal stent was placed in the circumflex artery, and pigs were allowed to recover for 3 wk. Characteristics of MetS, macrovascular and microvascular CAD, in-stent stenosis, and Ca2+ signaling in coronary smooth muscle cells were evaluated. MetS characteristics including, obesity, glucose intolerance, hyperinsulinemia, and elevated arterial pressure were elevated in Ossabaw swine compared to Yucatan swine. Ossabaw swine with MetS had more extensive and diffuse native CAD and in-stent stenosis and impaired coronary blood flow regulation compared with Yucatan. In-stent atherosclerotic lesions in Ossabaw coronary arteries were less fibrous and more cellular. Coronary smooth muscle cells from Ossabaw had impaired Ca2+ efflux and intracellular sequestration versus cells from Yucatan swine. Therefore, Ossabaw swine are a superior model of MetS, subsequent CAD, and cellular Ca2+ signaling defects, whereas Yucatan swine are leaner and relatively resistant to MetS and CAD. PMID:20819380

Applying a 2D based CAD scheme for detecting micro-calcification clusters using digital breast tomosynthesis images: an assessment

NASA Astrophysics Data System (ADS)

Park, Sang Cheol; Zheng, Bin; Wang, Xiao-Hui; Gur, David

2008-03-01

Digital breast tomosynthesis (DBT) has emerged as a promising imaging modality for screening mammography. However, visually detecting micro-calcification clusters depicted on DBT images is a difficult task. Computer-aided detection (CAD) schemes for detecting micro-calcification clusters depicted on mammograms can achieve high performance and the use of CAD results can assist radiologists in detecting subtle micro-calcification clusters. In this study, we compared the performance of an available 2D based CAD scheme with one that includes a new grouping and scoring method when applied to both projection and reconstructed DBT images. We selected a dataset involving 96 DBT examinations acquired on 45 women. Each DBT image set included 11 low dose projection images and a varying number of reconstructed image slices ranging from 18 to 87. In this dataset 20 true-positive micro-calcification clusters were visually detected on the projection images and 40 were visually detected on the reconstructed images, respectively. We first applied the CAD scheme that was previously developed in our laboratory to the DBT dataset. We then tested a new grouping method that defines an independent cluster by grouping the same cluster detected on different projection or reconstructed images. We then compared four scoring methods to assess the CAD performance. The maximum sensitivity level observed for the different grouping and scoring methods were 70% and 88% for the projection and reconstructed images with a maximum false-positive rate of 4.0 and 15.9 per examination, respectively. This preliminary study demonstrates that (1) among the maximum, the minimum or the average CAD generated scores, using the maximum score of the grouped cluster regions achieved the highest performance level, (2) the histogram based scoring method is reasonably effective in reducing false-positive detections on the projection images but the overall CAD sensitivity is lower due to lower signal-to-noise ratio, and (3) CAD achieved higher sensitivity and higher false-positive rate (per examination) on the reconstructed images. We concluded that without changing the detection threshold or performing pre-filtering to possibly increase detection sensitivity, current CAD schemes developed and optimized for 2D mammograms perform relatively poorly and need to be re-optimized using DBT datasets and new grouping and scoring methods need to be incorporated into the schemes if these are to be used on the DBT examinations.

Quantitative assessment of myocardial blood flow in coronary artery disease by cardiovascular magnetic resonance: comparison of Fermi and distributed parameter modeling against invasive methods.

PubMed

Papanastasiou, Giorgos; Williams, Michelle C; Dweck, Marc R; Alam, Shirjel; Cooper, Annette; Mirsadraee, Saeed; Newby, David E; Semple, Scott I

2016-09-13

Mathematical modeling of perfusion cardiovascular magnetic resonance (CMR) data allows absolute quantification of myocardial blood flow and can potentially improve the diagnosis and prognostication of obstructive coronary artery disease (CAD), against the current clinical standard of visual assessments. This study compares the diagnostic performance of distributed parameter modeling (DP) against the standard Fermi model, for the detection of obstructive CAD, in per vessel against per patient analysis. A pilot cohort of 28 subjects (24 included in the final analysis) with known or suspected CAD underwent adenosine stress-rest perfusion CMR at 3T. Data were analysed using Fermi and DP modeling against invasive coronary angiography and fractional flow reserve, acquired in all subjects. Obstructive CAD was defined as luminal stenosis of ≥70 % alone, or luminal stenosis ≥50 % and fractional flow reserve ≤0.80. On ROC analysis, DP modeling outperformed the standard Fermi model, in per vessel and per patient analysis. In per patient analysis, DP modeling-derived myocardial blood flow at stress demonstrated the highest sensitivity and specificity (0.96, 0.92) in detecting obstructive CAD, against Fermi modeling (0.78, 0.88) and visual assessments (0.79, 0.88), respectively. DP modeling demonstrated consistently increased diagnostic performance against Fermi modeling and showed that it may have merit for stratifying patients with at least one vessel with obstructive CAD. Clinicaltrials.gov NCT01368237 Registered 6 of June 2011. URL: https://clinicaltrials.gov/ct2/show/NCT01368237.

Prevalence of severe subclinical coronary artery disease on cardiac CT and MRI in patients with extra-cardiac arterial disease.

PubMed

den Dekker, M A M; van den Dungen, J J A M; Tielliu, I F J; Tio, R A; Jaspers, M M J J R; Oudkerk, M; Vliegenthart, R

2013-12-01

Patients with extra-cardiac arterial disease (ECAD) are at high risk of coronary artery disease (CAD). Prevalence of silent, significant CAD in patients with stenotic or aneurysmal ECAD was examined. Early detection and treatment may reduce CAD mortality in this high-risk group. ECAD patients without cardiac complaints underwent computed tomography (CT) for calcium scoring, coronary CT angiography (cCTA) if calcium score was 1,000 or under, and adenosine perfusion magnetic resonance imaging (APMR) if there was no left main stenosis. Significant CAD was defined as calcium score over 1,000, cCTA-detected coronary stenosis of at least 50% lumen diameter, and/or APMR-detected inducible myocardial ischemia. In cases of left main stenosis (or equivalent) or myocardial ischemia, patients were referred to a cardiologist. The prevalence of significant CAD was 56.8% (95% CI 47.5 to 66.0). One-hundred and eleven patients were included. Eighty-four patients (76%) had stenotic ECAD, and 27 (24%) had aneurysmal disease. In patients with stenotic ECAD, significant coronary stenosis was present in 32 (38%) and inducible ischemia in eight (12%). Corresponding results in aneurysmal ECAD were eight (30%) and two (11%), respectively (p for difference >.05). Sixteen (19%) patients with stenotic and six (22%) with aneurysmal ECAD were referred to a cardiologist, with subsequent cardiac intervention in seven (44%) and three (50%), respectively (both p >.05). Patients with stenotic or aneurysmal ECAD have a high prevalence of silent, significant CAD. Copyright © 2013 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Quality of medical management in coronary artery disease.

PubMed

Al Shammeri, Owayed; Stafford, Randall S; Alzenaidi, Ahlam; Al-Hutaly, Bushra; Abdulmonem, Alaa

2014-01-01

Patients with coronary artery disease (CAD) are at high risk of recurrent adverse cardiac events. Such risk can be diminished through a guideline-recommend optimal medical therapy (OMT), defined as adherence to appropriate antiplatelet therapy, lipid-lowering agents, beta-blockers and angio.tensin-converting enzyme inhibitors, blood pressure < 140/90 mm Hg ( < 130/80 mm Hg in diabetics and renal disease patients), low-density lipoprotein (LDL) < 2 mmol/L, smoking cessation and aerobic physical activity, and hemoglobin (Hb) A1c < 7%. Unfortunately, preliminary data suggest a wide gap between recommended and actual practices. The study aims to estimate the rate of achieving of OMT in CAD patients in Qassim Province. This observational study enrolled 207 consecutive CAD patients seen in cardiology clinic in Prince Sultan Cardiac Center in Qassim between January 2012 and May 2012. Eligible participants were over the age of 18, with CAD documented by either noninvasive testing or by coronary angiogram. We collected the demographic, medications, laboratory, and clinical data through in-person interviews, medical records, and an electronic patient database. OMT was achieved in only 10.4% of CAD patients. The rate of achievement of target systolic blood pressure was 76.5%, target diastolic blood pressure 88%, target LDL 68%, adherence to medications 91%. Diabetes was common (64% of all patients), and only 24% of these patients achieved the target HbA1c. The poor achievement of optimal medical therapy in CAD patients contributes to prevent.able mortality, morbidity, and health care costs. The observed shortcomings warrant investment in strategies to achieve OMT in these high-risk patients.

Increased interarm blood pressure difference is associated with autonomic dysfunction and atherosclerosis in patients with chest pain and no history of coronary artery disease.

PubMed

Hwang, Hui-Jeong; Sohn, Il Suk; Kim, Dong-Hee; Park, Chang-Bum; Cho, Jin-Man; Kim, Chong-Jin

2017-08-15

Interarm blood pressure (BP) difference has been reported to be associated with atherosclerosis and increased cardiovascular death. We were to investigate associations of interarm systolic blood pressure (SBP) difference with heart rate recovery (HRR) after exercise, an index of autonomic function, and carotid atherosclerotic markers, and to evaluate the association of interarm SBP difference with concurrent coronary artery disease (CAD). A total of 995 consecutive patients who underwent treadmill stress echocardiography with chest pain but no history of CAD were enrolled. Interarm SBP difference, carotid intima-media thickness (IMT) and plaque were measured before exercise, and HRR 2min following exercise was assessed. Suspected CAD was defined as newly developed wall motion abnormalities after treadmill exercise. Patients with an interarm SBP difference≥10mmHg had higher prevalence of hypertension, increased right and left SBP, right diastolic BP, mean arterial pressure, body mass index and carotid IMT, existent carotid plaque, lower metabolic equivalents and slower HRR. Interarm SBP difference≥10mmHg was independently associated with slower HRR and existent carotid plaque. Suspected CAD was associated with existent carotid plaque or slower HRR, but not with an interarm SBP difference≥10mmHg. Increased interarm SBP difference was associated with lower autonomic modulation and carotid atherosclerosis in patients with chest pain and no history of CAD, but not with suspected CAD. Observed adverse prognosis in patients with increased interarm BP difference might result from long-term persistent autonomic dysfunction and atherosclerosis. Copyright © 2017 Elsevier B.V. All rights reserved.

Urinary Bisphenol A Concentration and Angiography-Defined Coronary Artery Stenosis

PubMed Central

Melzer, David; Gates, Phil; Osborn, Nicholas J.; Henley, William E.; Cipelli, Ricardo; Young, Anita; Money, Cathryn; McCormack, Paul; Schofield, Peter; Mosedale, David; Grainger, David; Galloway, Tamara S.

2012-01-01

Background Bisphenol A is widely used in food and drinks packaging. There is evidence of associations between raised urinary bisphenol A (uBPA) and increased incidence of reported cardiovascular diagnoses. Methodology/Principal Findings To estimate associations between BPA exposure and angiographically graded coronary atherosclerosis. 591 patients participating in The Metabonomics and Genomics in Coronary Artery Disease (MaGiCAD) study in Cambridgeshire UK, comparing urinary BPA (uBPA) with grades of severity of coronary artery disease (CAD) on angiography. Linear models were adjusted for BMI, occupational social class and diabetes status. Severe (one to three vessel) CAD was present in 385 patients, 86 had intermediate disease (n = 86) and 120 had normal coronary arteries. The (unadjusted) median uBPA concentration was 1.28 ng/mL with normal coronary arteries, and 1.53 ng/mL with severe CAD. Compared to those with normal coronary arteries, uBPA concentration was significantly higher in those with severe CAD (OR per uBPA SD = 5.96 ng/ml OR = 1.43, CI 1.03 to 1.98, p = 0.033), and near significant for intermediate disease (OR = 1.69, CI 0.98 to 2.94, p = 0.061). There was no significant uBPA difference between patients with severe CAD (needing surgery) and the remaining groups combined. Conclusions/Significance BPA exposure was higher in those with severe coronary artery stenoses compared to those with no vessel disease. Larger studies are needed to estimate true dose response relationships. The mechanisms underlying the association remain to be established. PMID:22916252

Pre-procedural bioimpedance vectorial analysis of fluid status and prediction of contrast-induced acute kidney injury.

PubMed

Maioli, Mauro; Toso, Anna; Leoncini, Mario; Musilli, Nicola; Bellandi, Francesco; Rosner, Mitchell H; McCullough, Peter A; Ronco, Claudio

2014-04-15

The aim of this study was to evaluate the relationship between pre-procedural fluid status assessed by bioimpedance vector analysis (BIVA) and development of contrast-induced acute kidney injury (CI-AKI). Accurate fluid management in patients undergoing angiographic procedures is of critical importance in limiting the risk of CI-AKI. Therefore, establishing peri-procedural fluid volume related to increased risk of CI-AKI development is essential. We evaluated the fluid status by BIVA of 900 consecutive patients with stable coronary artery disease (CAD) immediately before coronary angiography, measuring the resistance/height (R/H) ratio and impedance/height (Z/H) vector. CI-AKI was defined as an increase in serum creatinine ≥0.5 mg/dl above baseline within 3 days after contrast administration (iodixanol). CI-AKI occurred in 54 patients (6.0%). Pre-procedural R/H ratios were significantly higher in patients with CI-AKI than without CI-AKI (395 ± 71 Ohm/m vs. 352 ± 58 Ohm/m, p = 0.001 for women; 303 ± 59 Ohm/m vs. 279 ± 45 Ohm/m, p = 0.009 for men), indicating lower fluid volume in the patients with CI-AKI. When patients were stratified according to R/H ratio, there was an almost 3-fold higher risk in patients with higher values (odds ratio [OR]: 2.9; 95% confidence interval [CI]: 1.5 to 5.5; p = 0.002). The optimal receiver-operating characteristic curve analysis threshold values of R/H ratio for predicting CI-AKI were 380 Ohm/m for women and 315 Ohm/m for men. R/H ratio above these thresholds was found to be a significant and independent predictor of CI-AKI (OR: 3.1; 95% CI: 1.8 to 5.5; p = 0.001). Lower fluid status evaluated by BIVA immediately before contrast medium administration resulted in a significant and independent predictor of CI-AKI in patients with stable CAD. This simple noninvasive analysis should be tested in guiding tailored volume repletion. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Application of the LDM algorithm to identify small lung nodules on low-dose MSCT scans

NASA Astrophysics Data System (ADS)

Zhao, Binsheng; Ginsberg, Michelle S.; Lefkowitz, Robert A.; Jiang, Li; Cooper, Cathleen; Schwartz, Lawrence H.

2004-05-01

In this work, we present a computer-aided detection (CAD) algorithm for small lung nodules on low-dose MSCT images. With this technique, identification of potential lung nodules is carried out with a local density maximum (LDM) algorithm, followed by reduction of false positives from the nodule candidates using task-specific 2-D/3-D features along with a knowledge-based nodule inclusion/exclusion strategy. Twenty-eight MSCT scans (40/80mAs, 120kVp, 5mm collimation/2.5mm reconstruction) from our lung cancer screening program that included at least one lung nodule were selected for this study. Two radiologists independently interpreted these cases. Subsequently, a consensus reading by both radiologists and CAD was generated to define a "gold standard". In total, 165 nodules were considered as the "gold standard" (average: 5.9 nodules/case; range: 1-22 nodules/case). The two radiologists detected 146 nodules (88.5%) and CAD detected 100 nodules (60.6%) with 8.7 false-positives/case. CAD detected an additional 19 nodules (6 nodules > 3mm and 13 nodules < 3mm) that had been missed by both radiologists. Preliminary results show that the CAD is capable of detecting small lung nodules with acceptable number of false-positives on low-dose MSCT scans and it can detect nodules that are otherwise missed by radiologists, though a majority are small nodules (< 3mm).

Workflow of CAD / CAM Scoliosis Brace Adjustment in Preparation Using 3D Printing.

PubMed

Weiss, Hans-Rudolf; Tournavitis, Nicos; Nan, Xiaofeng; Borysov, Maksym; Paul, Lothar

2017-01-01

High correction bracing is the most effective conservative treatment for patients with scoliosis during growth. Still today braces for the treatment of scoliosis are made by casting patients while computer aided design (CAD) and computer aided manufacturing (CAM) is available with all possibilities to standardize pattern specific brace treatment and improve wearing comfort. CAD / CAM brace production mainly relies on carving a polyurethane foam model which is the basis for vacuuming a polyethylene (PE) or polypropylene (PP) brace. Purpose of this short communication is to describe the workflow currently used and to outline future requirements with respect to 3D printing technology. Description of the steps of virtual brace adjustment as available today are content of this paper as well as an outline of the great potential there is for the future 3D printing technology. For 3D printing of scoliosis braces it is necessary to establish easy to use software plug-ins in order to allow adding 3D printing technology to the current workflow of virtual CAD / CAM brace adjustment. Textures and structures can be added to the brace models at certain well defined locations offering the potential of more wearing comfort without losing in-brace correction. Advances have to be made in the field of CAD / CAM software tools with respect to design and generation of individually structured brace models based on currently well established and standardized scoliosis brace libraries.

CAD mutations and uridine-responsive epileptic encephalopathy.

PubMed

Koch, Johannes; Mayr, Johannes A; Alhaddad, Bader; Rauscher, Christian; Bierau, Jörgen; Kovacs-Nagy, Reka; Coene, Karlien L M; Bader, Ingrid; Holzhacker, Monika; Prokisch, Holger; Venselaar, Hanka; Wevers, Ron A; Distelmaier, Felix; Polster, Tilman; Leiz, Steffen; Betzler, Cornelia; Strom, Tim M; Sperl, Wolfgang; Meitinger, Thomas; Wortmann, Saskia B; Haack, Tobias B

2017-02-01

Unexplained global developmental delay and epilepsy in childhood pose a major socioeconomic burden. Progress in defining the molecular bases does not often translate into effective treatment. Notable exceptions include certain inborn errors of metabolism amenable to dietary intervention. CAD encodes a multifunctional enzyme involved in de novo pyrimidine biosynthesis. Alternatively, pyrimidines can be recycled from uridine. Exome sequencing in three families identified biallelic CAD mutations in four children with global developmental delay, epileptic encephalopathy, and anaemia with anisopoikilocytosis. Two died aged 4 and 5 years after a neurodegenerative disease course. Supplementation of the two surviving children with oral uridine led to immediate cessation of seizures in both. A 4-year-old female, previously in a minimally conscious state, began to communicate and walk with assistance after 9 weeks of treatment. A 3-year-old female likewise showed developmental progress. Blood smears normalized and anaemia resolved. We establish CAD as a gene confidently implicated in this neurometabolic disorder, characterized by co-occurrence of global developmental delay, dyserythropoietic anaemia and seizures. While the natural disease course can be lethal in early childhood, our findings support the efficacy of uridine supplementation, rendering CAD deficiency a treatable neurometabolic disorder and therefore a potential condition for future (genetic) newborn screening. © The Author (2016). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Prototypes for Content-Based Image Retrieval in Clinical Practice

PubMed Central

Depeursinge, Adrien; Fischer, Benedikt; Müller, Henning; Deserno, Thomas M

2011-01-01

Content-based image retrieval (CBIR) has been proposed as key technology for computer-aided diagnostics (CAD). This paper reviews the state of the art and future challenges in CBIR for CAD applied to clinical practice. We define applicability to clinical practice by having recently demonstrated the CBIR system on one of the CAD demonstration workshops held at international conferences, such as SPIE Medical Imaging, CARS, SIIM, RSNA, and IEEE ISBI. From 2009 to 2011, the programs of CADdemo@CARS and the CAD Demonstration Workshop at SPIE Medical Imaging were sought for the key word “retrieval” in the title. The systems identified were analyzed and compared according to the hierarchy of gaps for CBIR systems. In total, 70 software demonstrations were analyzed. 5 systems were identified meeting the criterions. The fields of application are (i) bone age assessment, (ii) bone fractures, (iii) interstitial lung diseases, and (iv) mammography. Bridging the particular gaps of semantics, feature extraction, feature structure, and evaluation have been addressed most frequently. In specific application domains, CBIR technology is available for clinical practice. While system development has mainly focused on bridging content and feature gaps, performance and usability have become increasingly important. The evaluation must be based on a larger set of reference data, and workflow integration must be achieved before CBIR-CAD is really established in clinical practice. PMID:21892374

Prevalence and extent of obstructive coronary artery disease among patients undergoing elective coronary catheterization in New York State and Ontario.

PubMed

Ko, Dennis T; Tu, Jack V; Austin, Peter C; Wijeysundera, Harindra C; Samadashvili, Zaza; Guo, Helen; Cantor, Warren J; Hannan, Edward L

2013-07-10

Prior studies have shown that physicians in New York State (New York) perform twice as many cardiac catheterizations per capita as those in Ontario for stable patients. However, the role of patient selection in these findings and their implications for detection of obstructive coronary artery disease (CAD) are largely unknown. To evaluate the extent of obstructive CAD and to compare the probability of detecting obstructive CAD for patients undergoing cardiac catheterization. An observational study was conducted involving patients without a history of cardiac disease who underwent elective cardiac catheterization between October 1, 2008, and September 30, 2011. Obstructive CAD was defined as diameter stenosis of 50% or more in the left main coronary artery or stenosis of 70% or more in a major epicardial vessel. Observed rates and predicted probabilities of obstructive CAD. Predicted probabilities were estimated using logistic regression models. A total of 18,114 patients from New York and 54,933 from Ontario were included. The observed rate of obstructive CAD was significantly lower in New York at 30.4% (95% CI, 29.7%-31.0%) than in Ontario at 44.8% (95% CI, 44.4%-45.3%; P < .001). The percentage of patients with left main or 3-vessel CAD was also significantly lower in New York than in Ontario (7.0% [95% CI, 6.6%-7.3%] vs 13.0% [95% CI, 12.8%-13.3%]; P < .001). In New York, a substantially higher percentage of patients with low predicted probability of obstructive CAD underwent cardiac catheterization; for example, only 19.3% (95% CI, 18.7%-19.9%) of patients undergoing cardiac catheterization in New York had a greater than 50% predicted probability of having obstructive CAD than those in Ontario at 41% (95% CI, 40.6%-41.4%; P < .001). At 30 days, crude mortality for patients undergoing cardiac catheterization was slightly higher in New York at 0.65% (90 of 13,824; 95% CI, 0.51%-0.78%) than in Ontario at 0.38% (153 of 40,794; 95% CI, 0.32%-0.43%; P < .001). In Ontario compared with New York State, patients undergoing elective cardiac catheterization were significantly more likely to have obstructive CAD. This appears to be related to a higher percentage of patients in New York with low predicted probability of CAD undergoing cardiac catheterization.

The Difference Quantity of Urinary Peptides between Two Groups of Type 2 Diabetic Patients with or without Coronary Artery Disease

PubMed Central

Fu, Guangzhen; Hu, Mei; Chu, Lina; Zhang, Man

2015-01-01

Objectives. We aim to explore urinary biomarkers that could monitor CAD in type 2 diabetic patients. Materials and Methods. Urine samples from two groups, twenty-eight type 2 diabetic patients with coexisting CAD and thirty type 2 diabetic patients without CAD, were purified by MB-WCX and then analyzed by MALDI-TOF-MS. Subsequently, we compared the urinary peptide signatures of the two groups by use of ClinProTools2.1 and evaluated the potential ability of the differently expressed peptides to distinguish type 2 diabetic patients with coexisting CAD from type 2 diabetic patients without CAD by ROC analysis. Finally, the differently expressed peptides were identified by nanoliquid chromatography-tandem mass spectrometry. Results. There were six differently expressed peptides (m/z 1305.2, 1743.9, 2184.9, 2756.1, 3223.2, and 6196.1) between the two groups of subjects, and they were identified as fragments of isoform 1 of fibrinogen alpha chain precursor, prothrombin precursor, and interalpha-trypsin inhibitor heavy chain H4. The diagnostic efficacy of m/z 2756.1 and m/z 3223.2 was better than the other peptides. Area under ROC of the m/z 2756.1, and m/z 3223.2 was 0.98 and 0.93, respectively. Conclusions. These urinary peptides are potential urinary biomarkers for monitoring of type 2 diabetic patients with CAD. PMID:26089891

Material Distribution Optimization for the Shell Aircraft Composite Structure

NASA Astrophysics Data System (ADS)

Shevtsov, S.; Zhilyaev, I.; Oganesyan, P.; Axenov, V.

2016-09-01

One of the main goal in aircraft structures designing isweight decreasing and stiffness increasing. Composite structures recently became popular in aircraft because of their mechanical properties and wide range of optimization possibilities.Weight distribution and lay-up are keys to creating lightweight stiff strictures. In this paperwe discuss optimization of specific structure that undergoes the non-uniform air pressure at the different flight conditions and reduce a level of noise caused by the airflowinduced vibrations at the constrained weight of the part. Initial model was created with CAD tool Siemens NX, finite element analysis and post processing were performed with COMSOL Multiphysicsr and MATLABr. Numerical solutions of the Reynolds averaged Navier-Stokes (RANS) equations supplemented by k-w turbulence model provide the spatial distributions of air pressure applied to the shell surface. At the formulation of optimization problem the global strain energy calculated within the optimized shell was assumed as the objective. Wall thickness has been changed using parametric approach by an initiation of auxiliary sphere with varied radius and coordinates of the center, which were the design variables. To avoid a local stress concentration, wall thickness increment was defined as smooth function on the shell surface dependent of auxiliary sphere position and size. Our study consists of multiple steps: CAD/CAE transformation of the model, determining wind pressure for different flow angles, optimizing wall thickness distribution for specific flow angles, designing a lay-up for optimal material distribution. The studied structure was improved in terms of maximum and average strain energy at the constrained expense ofweight growth. Developed methods and tools can be applied to wide range of shell-like structures made of multilayered quasi-isotropic laminates.

A prospective longitudinal study of postnatal dentoalveolar and palatal growth: The anatomical basis for CAD/CAM-assisted production of cleft-lip-palate feeding plates.

PubMed

Bauer, Franz X; Güll, Florian D; Roth, Maximilian; Ritschl, Lucas M; Rau, Andrea; Gau, Dominik; Gruber, Maximilian; Eblenkamp, Markus; Hilmer, Bettina; Wolff, Klaus-Dietrich; Loeffelbein, Denys J

2017-10-01

This study describes the dentoalveolar and palatal growth during the first months of life. Knowledge concerning this development is essential to avoid unwanted events such as mucosal ulcerations or restriction of growth when cleft-lip and palate (CLP) patients are treated. The results involve the generation of CAD/CAM CLP-feeding plates. Intraoral impressions from 32 healthy newborns were taken monthly for 5 months, supplemented by measurements of body weight, length, and occipital-frontal head circumference. The casts were digitalized, and two observers manually selected defined anatomical landmarks on virtual 3-D models. The distances between these landmarks were evaluted. Statistical analysis included an inter-rater agreement analysis and the determination of growth. In total, 213 casts were analyzed, with 65 models excluded because of inaccuracies in impression-taking or cast production. Overall longitudinal growth was 20.3%, whereas transversal growth reached a maximum of 21.1%. Vertical growth was 32.4% at the tuberal level. On the basis of these results, a semiautomated series of feeding plates allowing for monthly expansion could be generated. The acquired data serve as a useful reference for other pediatric and orthofacial investigations and treatments. One such application is the automated, fully virtual manufacture of CLP-feeding plates based on only one impression-taking. Our data reveal when caution is needed to prevent ulceration. The series of plates generated can minimize the time-consuming impression-taking and the production of further plaster models. The method of measurement is suitable for documentary purposes. Clin. Anat. 30:846-854, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Functional evaluation of a CAD/CAM prosthesis for immediate defect repair after total maxillectomy: a case series of 18 patients with maxillary sinus cancer.

PubMed

Jiang, Fei-Fei; Hou, Yan; Lu, Li; Ding, Xiao-Xu; Li, Wei; Yan, Ai-Hui

2015-01-01

To evaluate the facial profiles and functional recovery of 18 patients treated by a computer-aided designed/manufactured hollow obturator prosthesis (CAD/CAM prosthesis) after total maxillectomy for malignant maxillary sinus tumor. A retrospective observational study was performed to evaluate the facial profiles and functional recovery of 18 patients with T3-4a N0 M0 maxillary sinus cancer, who were treated by total maxillectomy and simultaneous implantation of a computer-aided designed/manufactured hollow obturator prosthesis (CAD/CAM prosthesis). Follow-ups were performed 1, 3, 6, and 12 months after surgery. Facial measurements, speech intelligibility, and chewing and swallowing functions were examined. Thirteen patients converted to a permanent prosthesis 6 months after surgery. Comparisons were made between patients with and without the CAD/CAM or permanent prosthesis at various times using SPSS13.0 statistical software (SPSS Inc., Chicago, IL, USA). Speech intelligibility, facial depression, and eyeball prolapse results showed improvements with prosthesis use at 1, 3, and 6 months after surgery (p < 0.05). Swallowing function improved from level V to level II-IV with prosthesis use at 1, 3, and 6 months, and reached level I or II with permanent prosthesis use at 12 months after surgery. Simultaneous CAD/CAM prosthesis implantation recovered the facial profile, enhanced the speaking, swallowing, and chewing functions, and improved the quality of life of patients. Tumor recurrence can be detected by direct observation of the postoperative maxillary cavity. Therefore, this operation is recommended for simultaneous excision repair and functional reconstruction after total maxillectomy. This surgical treatment of maxillary sinus cancer is applied rarely in China, but it has a good effect based on our observation. Simultaneous CAD/CAM prosthesis implantation after total maxillectomy can recover the facial profile, enhance the speaking, swallowing, and chewing functions, and improve the quality of life of patients. Tumor recurrence can be detected by direct observation of the postoperative maxillary cavity. This technique avoids the need for dental implants because the bottom part of the prosthesis contains a palatal plate with dentures. © 2014 Wiley Periodicals, Inc.

Endothelial microparticles and vascular parameters in subjects with and without arterial hypertension and coronary artery disease.

PubMed

Sansone, Roberto; Baaken, Maximilian; Horn, Patrick; Schuler, Dominik; Westenfeld, Ralf; Amabile, Nicolas; Kelm, Malte; Heiss, Christian

2018-08-01

Endothelial microparticles (EMPs) are markers of endothelial injury and activation. The role of EMPs in arterial hypertension is not well understood and EMPs are increased both in arterial hypertension and coronary artery disease (CAD). The data presented here show EMPs as defined by CD31 + /41 - , CD62e + , and CD144 + surface markers and vascular hemodynamic parameters including office and central blood pressure, heart rate, aortic augmentation index, pulse wave velocity, flow-mediated dilation, nitroglycerin-mediated dilation, brachial artery diameter, hyperemic wall shear stress, and laser Doppler perfusion of the cutaneous microcirculation of normotensives and hypertensives with and without CAD.

[Prevention of atherosclerosis by enforcing non-smoking behavior].

PubMed

Gohlke, H

1991-01-01

Cigarette smoking is the single most important cause for avoidable diseases. Malignancies, pulmonary diseases, and the different manifestations of coronary artery disease (CAD) are either caused or developed significantly earlier with cigarette smoking. Even in the young-adult-age, smokers have more raised lesions in the abdominal aorta or in the coronary arteries. The analysis of more than 800 patients with myocardial infarction at young age showed that cigarette smoking is the dominant risk factor up until myocardial infarction. In male patients with CAD myocardial infarction is the first clinical manifestation. Therefore, the potential for primary prevention is small in traditional medical practice. Based on these experiences, we tried to support nonsmoking behavior in the 7th grade in school. Knowledge about the cardiovascular system and the acute effects of cigarette smoking were taught. In addition, role plays were performed by the children to practice rejecting an offered cigarette. With this intervention, new onset of smoking could be reduced by 50% over 2 years with a limited (8h) educational intervention. Reasons for the onset of cigarette smoking are different for boys and girls. The percentage of pupils smoking decreases with the increasing social status of the parents. The tobacco industry has recognized that children are an important target group as future consumers, and it uses that fact in its public relations and advertising strategy. However, the government undertakes virtually no efforts to control illegal sales of cigarettes to minors. Tax incomes from illegal sales of cigarettes to minors by far exceed the expenses for preventive efforts of state agencies. A change of this permissive attitude appears warranted.

Computed tomography versus invasive coronary angiography: design and methods of the pragmatic randomised multicentre DISCHARGE trial.

PubMed

Napp, Adriane E; Haase, Robert; Laule, Michael; Schuetz, Georg M; Rief, Matthias; Dreger, Henryk; Feuchtner, Gudrun; Friedrich, Guy; Špaček, Miloslav; Suchánek, Vojtěch; Fuglsang Kofoed, Klaus; Engstroem, Thomas; Schroeder, Stephen; Drosch, Tanja; Gutberlet, Matthias; Woinke, Michael; Maurovich-Horvat, Pál; Merkely, Béla; Donnelly, Patrick; Ball, Peter; Dodd, Jonathan D; Quinn, Martin; Saba, Luca; Porcu, Maurizio; Francone, Marco; Mancone, Massimo; Erglis, Andrejs; Zvaigzne, Ligita; Jankauskas, Antanas; Sakalyte, Gintare; Harań, Tomasz; Ilnicka-Suckiel, Malgorzata; Bettencourt, Nuno; Gama-Ribeiro, Vasco; Condrea, Sebastian; Benedek, Imre; Čemerlić Adjić, Nada; Adjić, Oto; Rodriguez-Palomares, José; Garcia Del Blanco, Bruno; Roditi, Giles; Berry, Colin; Davis, Gershan; Thwaite, Erica; Knuuti, Juhani; Pietilä, Mikko; Kępka, Cezary; Kruk, Mariusz; Vidakovic, Radosav; Neskovic, Aleksandar N; Díez, Ignacio; Lecumberri, Iñigo; Geleijns, Jacob; Kubiak, Christine; Strenge-Hesse, Anke; Do, The-Hoang; Frömel, Felix; Gutiérrez-Ibarluzea, Iñaki; Benguria-Arrate, Gaizka; Keiding, Hans; Katzer, Christoph; Müller-Nordhorn, Jacqueline; Rieckmann, Nina; Walther, Mario; Schlattmann, Peter; Dewey, Marc

2017-07-01

More than 3.5 million invasive coronary angiographies (ICA) are performed in Europe annually. Approximately 2 million of these invasive procedures might be reduced by noninvasive tests because no coronary intervention is performed. Computed tomography (CT) is the most accurate noninvasive test for detection and exclusion of coronary artery disease (CAD). To investigate the comparative effectiveness of CT and ICA, we designed the European pragmatic multicentre DISCHARGE trial funded by the 7th Framework Programme of the European Union (EC-GA 603266). In this trial, patients with a low-to-intermediate pretest probability (10-60 %) of suspected CAD and a clinical indication for ICA because of stable chest pain will be randomised in a 1-to-1 ratio to CT or ICA. CT and ICA findings guide subsequent management decisions by the local heart teams according to current evidence and European guidelines. Major adverse cardiovascular events (MACE) defined as cardiovascular death, myocardial infarction and stroke as a composite endpoint will be the primary outcome measure. Secondary and other outcomes include cost-effectiveness, radiation exposure, health-related quality of life (HRQoL), socioeconomic status, lifestyle, adverse events related to CT/ICA, and gender differences. The DISCHARGE trial will assess the comparative effectiveness of CT and ICA. • Coronary artery disease (CAD) is a major cause of morbidity and mortality. • Invasive coronary angiography (ICA) is the reference standard for detection of CAD. • Noninvasive computed tomography angiography excludes CAD with high sensitivity. • CT may effectively reduce the approximately 2 million negative ICAs in Europe. • DISCHARGE addresses this hypothesis in patients with low-to-intermediate pretest probability for CAD.

Nonobstructive Coronary Artery Disease by Coronary CT Angiography Improves Risk Stratification and Allocation of Statin Therapy.

PubMed

Emami, Hamed; Takx, Richard A P; Mayrhofer, Thomas; Janjua, Sumbal; Park, Jakob; Pursnani, Amit; Tawakol, Ahmed; Lu, Michael T; Ferencik, Maros; Hoffmann, Udo

2017-09-01

This study sought to determine prognostic value of nonobstructive coronary artery disease (CAD) for atherosclerotic cardiovascular disease (ASCVD) events and to determine whether incorporation of this information into the pooled cohort equation reclassifies recommendations for statin therapy as defined by the 2013 guidelines for cholesterol management of the American College of Cardiology and American Heart Association (ACC/AHA). Detection of nonobstructive CAD by coronary computed tomography angiography may improve risk stratification and permit individualized and more appropriate allocation of statin therapy. This study determined the pooled hazard ratio of nonobstructive CAD for ASCVD events from published studies and incorporated this information into the ACC/AHA pooled cohort equation. The study calculated revised sex- and ethnicity-based 10-year ASCVD risk and determined boundaries corresponding to the original 7.5% risk for ASCVD events. It also assessed reclassification for statin eligibility by incorporating the results from meta-analysis to individual patients from a separate cohort. This study included 2 studies (2,295 subjects; 66% male; prevalence of nonobstructive CAD, 47%; median follow-up, 49 months; 67 ASCVD events). The hazard ratio of nonobstructive CAD for ASCVD events was 3.2 (95% confidence interval: 1.5 to 6.7). Incorporation of this information into the pooled cohort equation resulted in reclassification toward statin eligibility in individuals with nonobstructive CAD, with an original ASCVD score of 3.0% and 5.9% or higher in African-American women and men and a score of 4.4% and 4.6% or higher in Caucasian women and men, respectively. The absence of nonobstructive CAD resulted in reclassification toward statin ineligibility if the original ASCVD score was as 10.0% and 17.9% or lower in African-American women and men and 13.7% and 14.3% or lower in Caucasian women and men, respectively. Reclassification is observed in 14% of patients. Detection of nonobstructive CAD by coronary computed tomography angiography improves risk stratification and permits individualized and more appropriate allocation of statin therapy across sex and ethnicity groups. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

A revised definition of the metabolic syndrome predicts coronary artery disease and ischemic stroke after adjusting for low density lipoprotein cholesterol in a 13-year cohort study of Japanese: the Suita study.

PubMed

Okamura, Tomonori; Kokubo, Yoshihiro; Watanabe, Makoto; Higashiyama, Aya; Ono, Yuu; Nishimura, Kunihiro; Okayama, Akira; Miyamoto, Yoshihiro

2011-07-01

Recently, several major organizations have proposed a unified definition for the metabolic syndrome (MetS), which should be evaluated in multiethnic groups. The effect of Mets on the incidence of cardiovascular disease needs to be assessed after adjusting for serum low density lipoprotein cholesterol (LDLC), a major risk factor for atherosclerotic diseases. This is especially needed to be evaluated in Asian populations with low incidence of coronary artery disease (CAD). We conducted a 13-year prospective study of 4939 Japanese living in an urban area. The MetS was defined using a unified classification that included cut-off points for waist circumference in Asians. The multivariable adjusted hazard ratios (HRs) of MetS for CAD and stroke were calculated using a Cox proportional model adjusted for other potential confounding factors with LDLC. During the follow-up period, there were 155 cases of CAD and 204 of stroke including 118 cerebral infarctions. In participants under 65 years old, the multivariable HRs of MetS for CAD were 1.21 (95% C.I., 0.64-2.28) in men and 4.44 (95% C.I., 1.73-11.4) in women; the HRs for ischemic stroke were 3.24 (95% C.I., 1.55-6.77) in men and 3.99 (95% C.I., 1.34-11.8) in women. In participants aged 65 years old and over, MetS only showed a significant association with CAD in men (HR 1.89, 95% C.I., 1.11-3.21). Serum LDLC was associated with increased risk of CAD in men irrespective of age group; however, it was not associated with CAD in women. There was no association between serum LDLC and ischemic stroke in any group stratified by sex and the age of 65. These results indicate that the new uniform MetS definition is useful for detecting high risk individuals, especially for middle-aged population. However, continuous screening for hypercholesterolemia is necessary to prevent CAD, especially in men, even in Asian countries such as Japan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Association of heat shock protein70-2 (HSP70-2) gene polymorphism with coronary artery disease in an Iranian population.

PubMed

Mardan-Nik, Maryam; Pasdar, Alireza; Jamialahmadi, Khadijeh; Biabangard-Zak, Atefeh; Mirhafez, Seyed Reza; Ghalandari, Marzieh; Tajfard, Mohammad; Mohebati, Mohsen; Esmaily, Habibollah; Ferns, Gordon A; Ghayour-Mobarhan, Majid

2014-10-25

Coronary artery disease (CAD) is an inflammatory process and a major cause of mortality and morbidity. The (heat shock protein70-2) HSP70-2 gene is reported to be associated with coronary artery disease possibly by affecting the regulation of pro-inflammatory cytokines such as TNF-α. The association between CAD and the HSP70-2 gene +1267A>G polymorphism has been studied in some populations but there are no data about this association in the Iranian population. We have investigated the association between the HSP70-2 gene +1267A>G polymorphism and angiographically defined CAD within an Iranian population. We determined the presence of the HSP70-2 gene +1267A>G polymorphism in 628 patients with CAD and 307 healthy individuals using PCR-RFLP. Of the patients, 433 (68%) had >50% stenosis (CAD+) and the remaining 195 patients had <50% stenosis (CAD-), based on coronary angiography. Angiogram positive patients were subdivided into three groups: those with single (n=113), double (n=134), and triple vessels (n=186) disease. A significant higher frequency of AG+GG genotypes (G allele carriers) was observed in angiogram positive and angiogram negative groups compared to controls in a dominant analysis model of the HSP70-2 gene +1267A>G position (51.2 vs. 43.2, P=0.002, OR=1.37) (51.0 vs. 43.2, P=0.01, OR=1.37). The allele frequency of the HSP70-2 G was also significantly higher in angiogram positive and angiogram negative groups compared to the control group (51.2 vs. 43.2, P=0.002, OR=1.37) (51.0 vs. 43.2, P=0.01, OR=1.37). These results suggest that HSP70-2 +1267 polymorphism may influence the risk of CAD in Iranian population, however further studies are needed to clarify the role of other HSP70-2 gene polymorphisms in the pathogenesis of the CAD. Copyright © 2014 Elsevier B.V. All rights reserved.

Danish study of Non-Invasive testing in Coronary Artery Disease (Dan-NICAD): study protocol for a randomised controlled trial.

PubMed

Nissen, Louise; Winther, Simon; Isaksen, Christin; Ejlersen, June Anita; Brix, Lau; Urbonaviciene, Grazina; Frost, Lars; Madsen, Lene Helleskov; Knudsen, Lars Lyhne; Schmidt, Samuel Emil; Holm, Niels Ramsing; Maeng, Michael; Nyegaard, Mette; Bøtker, Hans Erik; Bøttcher, Morten

2016-05-26

Coronary computed tomography angiography (CCTA) is an established method for ruling out coronary artery disease (CAD). Most patients referred for CCTA do not have CAD and only approximately 20-30 % of patients are subsequently referred to further testing by invasive coronary angiography (ICA) or non-invasive perfusion evaluation due to suspected obstructive CAD. In cases with severe calcifications, a discrepancy between CCTA and ICA often occurs, leading to the well-described, low-diagnostic specificity of CCTA. As ICA is cost consuming and involves a risk of complications, an optimized algorithm would be valuable and could decrease the number of ICAs that do not lead to revascularization. The primary objective of the Dan-NICAD study is to determine the diagnostic accuracy of cardiac magnetic resonance imaging (CMRI) and myocardial perfusion scintigraphy (MPS) as secondary tests after a primary CCTA where CAD could not be ruled out. The secondary objective includes an evaluation of the diagnostic precision of an acoustic technology that analyses the sound of coronary blood flow. It may potentially provide better stratification prior to CCTA than clinical risk stratification scores alone. Dan-NICAD is a multi-centre, randomised, cross-sectional trial, which will include approximately 2,000 patients without known CAD, who were referred to CCTA due to a history of symptoms suggestive of CAD and a low-risk to intermediate-risk profile, as evaluated by a cardiologist. Patient interview, sound recordings, and blood samples are obtained in connection with the CCTA. All patients with suspected obstructive CAD by CCTA are randomised to either stress CMRI or stress MPS, followed by ICA with fractional flow reserve (FFR) measurements. Obstructive CAD is defined as an FFR below 0.80 or as high-grade stenosis (>90 % diameter stenosis) by visual assessment. Diagnostic performance is evaluated as sensitivity, specificity, predictive values, likelihood ratios, and C statistics. Enrolment commenced in September 2014 and is expected to be complete in May 2016. Dan-NICAD is designed to assess whether a secondary perfusion examination after CCTA could safely reduce the number of ICAs where revascularization is not required. The results are expected to add knowledge about the optimal algorithm for diagnosing CAD. Clinicaltrials.gov identifier, NCT02264717 . Registered on 26 September 2014.

Secondary Maxillary and Orbital Floor Reconstruction With a Free Scapular Flap Using Cutting and Fixation Guides Created by Computer-Aided Design/Computer-Aided Manufacturing.

PubMed

Morita, Daiki; Numajiri, Toshiaki; Tsujiko, Shoko; Nakamura, Hiroko; Yamochi, Ryo; Sowa, Yoshihiro; Yasuda, Makoto; Hirano, Shigeru

2017-11-01

Computer-aided design/computer-aided manufacturing (CAD/CAM) guides are now widely used in maxillofacial reconstruction. However, there are few reports of CAD/CAM guides being used for scapular flaps. The authors performed the secondary maxillary and orbital floor reconstruction using a free latissimus dorsi muscle, cutaneous tissue, and scapular flap designed using CAD/CAM techniques in a 72-year-old man who had undergone partial maxillectomy four years previously. The patient had diplopia, the vertical dystopia of eye position, and a large oral-nasal-cutaneous fistula. After the operation, the authors confirmed that the deviation between the postoperative and preoperative planning three-dimensional images was less than 2 mm. Because scapular guides require 3 cutting surfaces, the shape of the scapular guide is more complex than that of a conventional fibular guide. In orbital floor reconstruction, the use of a CAM technique such as that used to manufacture the authors' fixation guide is as necessary for accurate, safe, and easy reconstruction as is preoperative CAD planning. The production of a fixation guide as well as a cutting guide is particularly useful because it is difficult to determine the angle for reconstructing the orbital floor by freehand techniques. In this case, the orbital floor was reconstructed based on a mirror image of the healthy side to avoid overcompression of the orbital tissue. Although the patient's vertical dystopia of eye position was improved, diplopia was not improved because, for greater safety, the authors did not plan overcorrection of the orbital volume.

Functional Analysis of Arabidopsis Mutants Points to Novel Roles for Glutathione in Coupling H2O2 to Activation of Salicylic Acid Accumulation and Signaling

PubMed Central

Han, Yi; Chaouch, Sejir; Mhamdi, Amna; Queval, Guillaume; Zechmann, Bernd

2013-01-01

Abstract Aims: Through its interaction with H2O2, glutathione is a candidate for transmission of signals in plant responses to pathogens, but identification of signaling roles is complicated by its antioxidant function. Using a genetic approach based on a conditional catalase-deficient Arabidopsis mutant, cat2, this study aimed at establishing whether GSH plays an important functional role in the transmission of signals downstream of H2O2. Results: Introducing the cad2 or allelic mutations in the glutathione synthesis pathway into cat2 blocked H2O2-triggered GSH oxidation and accumulation. While no effects on NADP(H) or ascorbate were observed, and H2O2-induced decreases in growth were maintained, blocking GSH modulation antagonized salicylic acid (SA) accumulation and SA-dependent responses. Other novel double and triple mutants were produced and compared with cat2 cad2 at the levels of phenotype, expression of marker genes, nontargeted metabolite profiling, accumulation of SA, and bacterial resistance. Most of the effects of the cad2 mutation on H2O2-triggered responses were distinct from those produced by mutations for GLUTATHIONE REDUCTASE1 (GR1) or NONEXPRESSOR OF PATHOGENESIS-RELATED GENES 1 (NPR1), and were linked to compromised induction of ISOCHORISMATE SYNTHASE1 (ICS1) and ICS1-dependent SA accumulation. Innovation: A novel genetic approach was used in which GSH content or antioxidative capacity was independently modified in an H2O2 signaling background. Analysis of new double and triple mutants allowed us to infer previously undescribed regulatory roles for GSH. Conclusion: In parallel to its antioxidant role, GSH acts independently of NPR1 to allow increased intracellular H2O2 to activate SA signaling, a key defense response in plants. Antioxid. Redox Signal. 18, 2106–2121. PMID:23148658

Custom implant design for large cranial defects.

PubMed

Marreiros, Filipe M M; Heuzé, Y; Verius, M; Unterhofer, C; Freysinger, W; Recheis, W

2016-12-01

The aim of this work was to introduce a computer-aided design (CAD) tool that enables the design of large skull defect (>100 [Formula: see text]) implants. Functional and aesthetically correct custom implants are extremely important for patients with large cranial defects. For these cases, preoperative fabrication of implants is recommended to avoid problems of donor site morbidity, sufficiency of donor material and quality. Finally, crafting the correct shape is a non-trivial task increasingly complicated by defect size. We present a CAD tool to design such implants for the neurocranium. A combination of geometric morphometrics and radial basis functions, namely thin-plate splines, allows semiautomatic implant generation. The method uses symmetry and the best fitting shape to estimate missing data directly within the radiologic volume data. In addition, this approach delivers correct implant fitting via a boundary fitting approach. This method generates a smooth implant surface, free of sharp edges that follows the main contours of the boundary, enabling accurate implant placement in the defect site intraoperatively. The present approach is evaluated and compared to existing methods. A mean error of 89.29 % (72.64-100 %) missing landmarks with an error less or equal to 1 mm was obtained. In conclusion, the results show that our CAD tool can generate patient-specific implants with high accuracy.

Differential Function of N-Cadherin and Cadherin-7 in the Control of Embryonic Cell Motility

PubMed Central

Dufour, Sylvie; Beauvais-Jouneau, Alice; Delouvée, Annie; Thiery, Jean Paul

1999-01-01

Similar amounts of N-cadherin and cadherin-7, the prototypes of type I and type II cadherin, induced cell-cell adhesion in murine sarcoma 180 transfectants, Ncad-1 and cad7-29, respectively. However, in the initial phase of aggregation, Ncad-1 cells aggregated more rapidly than cad7-29 cells. Isolated Ncad-1 and cad7-29 cells adhered and spread in a similar manner on fibronectin (FN), whereas aggregated cad7-29 cells were more motile and dispersed than aggregated Ncad-1 cells. cad7-29 cells established transient contacts with their neighbors which were stabilized if FN-cell interactions were perturbed. In contrast, Ncad-1 cells remained in close contact when they migrated on FN. Both β-catenin and cadherin were more rapidly downregulated in cad7-29 than in Ncad-1 cells treated with cycloheximide, suggesting a higher turnover rate for cadherin-7–mediated cell-cell contacts than for those mediated by N-cadherin. The extent of FN-dependent focal adhesion kinase phosphorylation was much lower if the cells had initiated N-cadherin–mediated rather than cadherin-7–mediated cell adhesion before plating. On grafting into the embryo, Ncad-1 cells did not migrate and remained at or close to the graft site, even after 48 h, whereas grafted cad7-29 cells dispersed efficiently into embryonic structures. Thus, the adhesive phenotype of cadherin-7–expressing cells is regulated by the nature of the extracellular matrix environment which also controls the migratory behavior of the cells. In addition, adhesions mediated by different cadherins differentially regulate FN-dependent signaling. The transient contacts specifically observed in cadherin- 7–expressing cells may also be important in the control of cell motility. PMID:10427101

Normal-Weight Central Obesity and Mortality Risk in Older Adults With Coronary Artery Disease.

PubMed

Sharma, Saurabh; Batsis, John A; Coutinho, Thais; Somers, Virend K; Hodge, David O; Carter, Rickey E; Sochor, Ondrej; Kragelund, Charlotte; Kanaya, Alka M; Zeller, Marianne; Park, Jong-Seon; Køber, Lars; Torp-Pedersen, Christian; Lopez-Jimenez, Francisco

2016-03-01

To study the relationship between body mass index (BMI) and central obesity and mortality in elderly patients with coronary artery disease (CAD). We identified 7057 patients 65 years or older from 5 cohort studies assessing mortality risk using either waist circumference (WC) or waist-hip ratio (WHR) in patients with CAD from January 1, 1980, to December 31, 2008. Normal weight, overweight, and obesity were defined using standard BMI cutoffs. High WHR was defined as 0.85 or more for women and 0.90 or more for men. High WC was defined as 88 cm or more for women and 102 cm or more for men. Separate models examined WC or WHR in combination with BMI (6 categories each) as the primary predictor (referent = normal BMI and normal WC or WHR). Cox proportional hazards models investigated the relationship between these obesity categories and mortality. Patients' mean age was 73.0±6.0 years (3741 [53%] women). The median censor time was 7.1 years. A normal BMI with central obesity (high WHR or high WC) demonstrated highest mortality risk (hazard ratio [HR], 1.29; 95% CI, 1.14-1.46; HR, 1.29; 95% CI, 1.12-1.50, respectively). High WHR was also predictive of mortality in the overall (HR, 2.14; 95% CI, 1.93-2.38) as well as in the sex-specific cohort. In the overall cohort, high WC was not predictive of mortality (HR, 1.04; 95% CI, 0.97-1.12); however, it predicted higher risk in men (HR, 1.12; 95% CI, 1.01-1.24). In older adults with CAD, normal-weight central obesity defined using either WHR or WC is associated with high mortality risk, highlighting a need to combine measures in adiposity-related risk assessment. Copyright © 2016. Published by Elsevier Inc.

Sandia Advanced MEMS Design Tools, Version 2.2.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor; Allen, James; Lantz, Jeffery

2010-01-19

The Sandia National Laboratories Advanced MEMS Design Tools, Version 2.2.5, is a collection of menus, prototype drawings, and executables that provide significant productivity enhancements when using AutoCAD to design MEMS components. This release is designed for AutoCAD 2000i, 2002, or 2004 and is supported under Windows NT 4.0, Windows 2000, or XP. SUMMiT V (Sandia Ultra planar Multi level MEMS Technology) is a 5 level surface micromachine fabrication technology, which customers internal and external to Sandia can access to fabricate prototype MEMS devices. This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication processmore » b) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) New features in this version: AutoCAD 2004 support has been added. SafeExplode ? a new feature that explodes blocks without affecting polylines (avoids exploding polylines into objects that are ignored by the DRC and Visualization tools). Layer control menu ? a pull-down menu for selecting layers to isolate, freeze, or thaw. Updated tools: A check has been added to catch invalid block names. DRC features: Added username/password validation, added a method to update the user?s password. SNL_DRC_WIDTH ? a value to control the width of the DRC error lines. SNL_BIAS_VALUE ? a value use to offset selected geometry SNL_PROCESS_NAME ? a value to specify the process name Documentation changes: The documentation has been updated to include the new features. While there exist some files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

Computer-aided mass detection in mammography: False positive reduction via gray-scale invariant ranklet texture features

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masotti, Matteo; Lanconelli, Nico; Campanini, Renato

In this work, gray-scale invariant ranklet texture features are proposed for false positive reduction (FPR) in computer-aided detection (CAD) of breast masses. Two main considerations are at the basis of this proposal. First, false positive (FP) marks surviving our previous CAD system seem to be characterized by specific texture properties that can be used to discriminate them from masses. Second, our previous CAD system achieves invariance to linear/nonlinear monotonic gray-scale transformations by encoding regions of interest into ranklet images through the ranklet transform, an image transformation similar to the wavelet transform, yet dealing with pixels' ranks rather than with theirmore » gray-scale values. Therefore, the new FPR approach proposed herein defines a set of texture features which are calculated directly from the ranklet images corresponding to the regions of interest surviving our previous CAD system, hence, ranklet texture features; then, a support vector machine (SVM) classifier is used for discrimination. As a result of this approach, texture-based information is used to discriminate FP marks surviving our previous CAD system; at the same time, invariance to linear/nonlinear monotonic gray-scale transformations of the new CAD system is guaranteed, as ranklet texture features are calculated from ranklet images that have this property themselves by construction. To emphasize the gray-scale invariance of both the previous and new CAD systems, training and testing are carried out without any in-between parameters' adjustment on mammograms having different gray-scale dynamics; in particular, training is carried out on analog digitized mammograms taken from a publicly available digital database, whereas testing is performed on full-field digital mammograms taken from an in-house database. Free-response receiver operating characteristic (FROC) curve analysis of the two CAD systems demonstrates that the new approach achieves a higher reduction of FP marks when compared to the previous one. Specifically, at 60%, 65%, and 70% per-mammogram sensitivity, the new CAD system achieves 0.50, 0.68, and 0.92 FP marks per mammogram, whereas at 70%, 75%, and 80% per-case sensitivity it achieves 0.37, 0.48, and 0.71 FP marks per mammogram, respectively. Conversely, at the same sensitivities, the previous CAD system reached 0.71, 0.87, and 1.15 FP marks per mammogram, and 0.57, 0.73, and 0.92 FPs per mammogram. Also, statistical significance of the difference between the two per-mammogram and per-case FROC curves is demonstrated by the p-value<0.001 returned by jackknife FROC analysis performed on the two CAD systems.« less

Analysis of the Hexapod Work Space using integration of a CAD/CAE system and the LabVIEW software

NASA Astrophysics Data System (ADS)

Herbuś, K.; Ociepka, P.

2015-11-01

The paper presents the problems related to the integration of a CAD/CAE system with the LabVIEW software. The purpose of the integration is to determine the workspace of a hexapod model basing on a mathematical model describing it motion. In the first stage of the work concerning the integration task the 3D model to simulate movements of a hexapod was elaborated. This phase of the work was done in the “Motion Simulation” module of the CAD/CAE/CAM Siemens NX system. The first step was to define the components of the 3D model in the form of “links”. Individual links were defined according to the nature of the hexapod elements action. In the model prepared for movement simulation were created links corresponding to such elements as: electric actuator, top plate, bottom plate, ball-and-socket joint, toggle joint Phillips. Then were defined the constraints of the “joint” type (e.g.: revolute joint, slider joint, spherical joint) between the created component of the “link” type, so that the computer simulation corresponds to the operation of a real hexapod. The next stage of work included implementing the mathematical model describing the functioning of a hexapod in the LabVIEW software. At this stage, particular attention was paid to determining procedures for integrating the virtual 3D hexapod model with the results of calculations performed in the LabVIEW. The results relate to specific values of the jump of electric actuators depending on the position of the car on the hexapod. The use of integration made it possible to determine the safe operating space of a stationary hexapod taking into consideration the security of a person in the driving simulator designed for the disabled.

Analysis of machining accuracy during free form surface milling simulation for different milling strategies

NASA Astrophysics Data System (ADS)

Matras, A.; Kowalczyk, R.

2014-11-01

The analysis results of machining accuracy after the free form surface milling simulations (based on machining EN AW- 7075 alloys) for different machining strategies (Level Z, Radial, Square, Circular) are presented in the work. Particular milling simulations were performed using CAD/CAM Esprit software. The accuracy of obtained allowance is defined as a difference between the theoretical surface of work piece element (the surface designed in CAD software) and the machined surface after a milling simulation. The difference between two surfaces describes a value of roughness, which is as the result of tool shape mapping on the machined surface. Accuracy of the left allowance notifies in direct way a surface quality after the finish machining. Described methodology of usage CAD/CAM software can to let improve a time design of machining process for a free form surface milling by a 5-axis CNC milling machine with omitting to perform the item on a milling machine in order to measure the machining accuracy for the selected strategies and cutting data.

Computer aided detection system for lung cancer using computer tomography scans

NASA Astrophysics Data System (ADS)

Mahesh, Shanthi; Rakesh, Spoorthi; Patil, Vidya C.

2018-04-01

Lung Cancer is a disease can be defined as uncontrolled cell growth in tissues of the lung. If we detect the Lung Cancer in its early stage, then that could be the key of its cure. In this work the non-invasive methods are studied for assisting in nodule detection. It supplies a Computer Aided Diagnosis System (CAD) for early detection of lung cancer nodules from the Computer Tomography (CT) images. CAD system is the one which helps to improve the diagnostic performance of radiologists in their image interpretations. The main aim of this technique is to develop a CAD system for finding the lung cancer using the lung CT images and classify the nodule as Benign or Malignant. For classifying cancer cells, SVM classifier is used. Here, image processing techniques have been used to de-noise, to enhance, for segmentation and edge detection of an image is used to extract the area, perimeter and shape of nodule. The core factors of this research are Image quality and accuracy.

Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements.

PubMed

Keul, Christine; Müller-Hahl, Manuel; Eichberger, Marlis; Liebermann, Anja; Roos, Malgorzata; Edelhoff, Daniel; Stawarczyk, Bogna

2014-09-01

To determine the impact of pre-treatment of adhesive systems on the work of adhesion (WA) between CAD/CAM polymers and resin composite cements and compare with conventional tests of previous studies. Surface parameters were measured by contact angle measurement (2700 measurements) and WA was calculated. Five CAD/CAM polymers were used for fabrication of specimens (n=75/subgroup): artBloc Temp (A), Telio CAD (B), Nano Composite CFI-C (C), exp. CAD/CAM nanohybrid composite (D), and LAVA Ultimate (E). Then, air-abraded specimens were pre-treated (n=15 per group): Ambarino P60 (I), Monobond Plus/Heliobond (II), visio.link (III), VP connect (IV), and no pre-treatment (V). Resin composite cement specimens (n=75) were smoothed out homogeneously on a glass plate (n=15/group): RelyX ARC (RXA), Variolink II (VAR), Panavia F2.0 (PAN), RelyX Unicem (RXU), and Clearfil SA Cement (CSA). Contact angles were determined with 3 drops of distilled water and diiodomethane each. Data were analyzed using Kruskal-Wallis-H test and Spearman-Rho correlation (p<0.05). CAD/CAM materials (B), (A), and (C) showed higher WA compared to (D) and (E). (II) and (IV) resulted in higher WA than (I), (III) and (V). VAR had the significantly lowest WA, followed by RXU, RXA, CSA and PAN. No correlation occurred between WA and TBS/SBS whereas polar component of surface free energy of CAD/CAM resin and spreading coefficient showed significant positive correlation with TBS/SBS. Determination of WA is not a proper method to draw conclusions about the bond between resin materials. Destructive test methods are not dispensable. The successful outcome of fixed dental restorations depends, among others, on the quality of bonding between the tooth and the restoration. Additional pre-treatment of the dental CAD/CAM resin restoration by bonding systems can be recommended for clinical use. Pre-treatment showed a significant impact on the surface properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

Calcium dobesilate may alleviate diabetes-induced endothelial dysfunction and inflammation

PubMed Central

Zhou, Yijun; Yuan, Jiangzi; Qi, Chaojun; Shao, Xinghua; Mou, Shan; Ni, Zhaohui

2017-01-01

Diabetic kidney disease (DKD) is a leading cause of end-stage renal disease. However, the pathogenesis of DKD remains unclear, and no effective treatments for the disease are available. Thus, there is an urgent need to elucidate the pathogenic mechanisms of DKD and to develop more effective therapies for this disease. Human umbilical vein endothelial cells (HUVECs) were cultured using different D-glucose concentrations to determine the effect of high glucose (HG) on the cells. Alternatively, HUVECs were incubated with 100 µmol/l calcium dobesilate (CaD) to detect its effects. The authors subsequently measured HUVEC proliferation via cell counting kit-8 assays. In addition, HUVEC angiogenesis was investigated via migration assays and fluorescein isothiocyanate (FITC)-labelled bovine serum albumin (BSA) permeability assays. The content or distribution of markers of endothelial dysfunction [vascular endothelial growth factor (VEGF), VEGF receptor (R) and endocan) or inflammation [intercellular adhesion molecule (ICAM)-1, monocyte chemotactic protein (MCP)-1 and pentraxin-related protein (PTX3)] was evaluated via reverse transcription-quantitative polymerase chain reaction and western blotting. HG treatment induced increased in VEGF, VEGFR, endocan, ICAM-1, MCP-1 and PTX3 mRNA and protein expression in HUVECs. HG treatment for 24 to 48 h increased cell proliferation in a time-dependent manner, but the cell proliferation rate was decreased at 72 h of HG treatment. Conversely, CaD inhibited abnormal cell proliferation. HG treatment also significantly enhanced HVUEC migration compared to the control treatment. In contrast, CaD treatment partially inhibited HUVEC migration compared to HG exposure. HG-treated HUVECs exhibited increased FITC-BSA permeability compared to control cells cultured in medium alone; however, CaD application prevented the HG-induced increase in FITC-BSA permeability and suppressed HG-induced overexpression of endothelial markers (VEGF, VEGFR-2, endocan) and inflammation markers (ICAM-1, MCP-1, PTX3) in HUVECs. CaD has angioprotective properties and protects endothelial cells partly by ameliorating HG-induced inflammation. The current results demonstrated the potential applicability of CaD to the treatment of diabetic nephropathy, particularly during the early stages of this disease. PMID:29039485

Cardiovascular comorbidities in obstructive sleep apnoea according to age: a sleep clinic population study.

PubMed

Hua-Huy, Thông; Rouhani, Saïd; Nguyen, Xuan-Yen; Luchon, Laurent; Meurice, Jean-Claude; Dinh-Xuan, Anh Tuan

2015-10-01

To describe the features of obstructive sleep apnoea (OSA) and its association with arterial hypertension (HT), coronary artery disease (CAD), and arrhythmias in elderly (≥65 years) versus younger patients. All adult patients referred to our Sleep Research Unit for suspected OSA were included and underwent a thorough medical examination and an in-laboratory polysomnography. The severity of OSA was defined by the apnoea-hypopnoea index (AHI) as mild [5-15/h), moderate [15-30/h), and severe (≥30/h). Elderly patients (n = 136) and really old patients (>75 years) had higher prevalence of OSA (89 %) and severe OSA (36.8 %) as compared to younger patients (n = 439; 79.5 and 27.6 %, respectively, p < 0.05). In patients with OSA, the elderly group had a poorer sleep quality and more severe nocturnal oxygen desaturation than the younger group. Elderly patients presented higher percentages of HT (47.8 %), CAD (19.8 %), and arrhythmias (16.2 %) as compared to younger patients (p < 0.01). The odds ratio (OR) for HT increased with OSA severity from 1.0 to 1.65 (95 % confidence interval 0.83-3.27), 1.0 to 2.5 (95 % CI 1.25-5.00), and 1.0 to 3.77 (1.95-7.29) in younger patients, but not in elderly ones where the OR increased from 1.0 to 0.6 (0.17-2.04), 1.0 to 1.14 (0.34-3.82), and 1.0 to 1.46 (0.46-4.63), respectively. Stronger relation of HT and OSA severity in younger patients should encourage us to screen OSA in these patients at very young age. Increased OSA severity without obesity in very old patients needs to be confirmed and further studied.

Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design.

PubMed

Ribeiro, Isabella Lima Arrais; Campos, Fernanda; Sousa, Rafael Santiago; Alves, Maria Luiza Lima; Rodrigues, Dalton Matos; Souza, Rodrigo Othavio Assuncão; Bottino, Marco Antonio

2015-01-01

Discrepancies at the abutment/crown interface can affect the longevity of zirconia restorations. The aim was to evaluate the marginal and internal discrepancies (MD and ID) of zirconia copings manufactured by two milling systems with different finish lines. Three aluminum-master-dies (h = 5.5 mm; Ψ =7.5 mm; 6΀), with different finish lines (large chamfer [LC]; tilted chamfer [TC]; rounded shoulder [RS]) were fabricated. Twenty impressions were made from each master die and poured. Sixty zirconia copings were manufactured and divided according to the factors "finish line" and "milling system" (n = 10): CAD LC = Computer-aided design/computer-aided manufacturing (CAD/CAM) + LC; CAD TC = CAD/CAM + TC; CAD RS = CAD/CAM + RS; MAD LC = manually aided design/manually aided manufacturing (MAD/MAM) + LC; MAD TC = MAD/MAM + TC; and MAD RS = MAD/MAM + RS. For MD analysis, each coping was fixed, and the distance between the external edges of the coping and the edge of the cervical preparation was measured (50 points). Using the same copings, the ID of each coping was evaluated, by the replica technique, at 12 points equally distributed among the regions (n = 10): Ray (R), axial (A), and occlusal (Occl). The measurements were performed by optical microscopy (Χ250). The data (μm) were subjected to parametric and non-parametric statistical analyses. For the MAD/MAM system, the "finish line" (P = 0.0001) affected significantly the MD median values (μm): LC = 251.80 a , RS = 68.40 a and TC = 8.10 b (Dunn's test). For the CAD/CAM system, the median MD values (μm) were not affected by the factor "finish line" (P = 0.4037): LC = 0.82 a , RS = 0.52 a , and TC = 0.89 a . For the ID, it was observed interaction between the finish line types and the region (P = 0.0001) and between region and milling system (P = 0.0031) (RM-ANOVA). The CAD/CAM system presented lower MD values, regardless the finish line. However, the MAD/MAM system showed ID values smaller than those of CAD/CAM.

Polygamy and Risk of Coronary Artery Disease in Men Undergoing Angiography: An Observational Study.

PubMed

Daoulah, Amin; Lotfi, Amir; Al-Murayeh, Mushabab; Al-Kaabi, Salem; Al-Faifi, Salem M; Elkhateeb, Osama E; Alama, Mohamed N; Hersi, Ahmad S; Dixon, Ciaran M; Ahmed, Waleed; Al-Shehri, Mohamed; Youssef, Ali; Elimam, Ahmed Moustafa; Abougalambou, Ayman S; Murad, Waheed; Alsheikh-Ali, Alawi A

2017-01-01

Epidemiologic evidence suggests a link between psychosocial risk factors such as marital status and coronary artery disease (CAD). Polygamy (multiple concurrent wives) is a distinct marital status practiced in many countries in Asia and the Middle East, but its association with CAD is not well defined. We conducted a multicenter, observational study of consecutive patients undergoing coronary angiography during the period from April 1, 2013, to March 30, 2014. Of 1,068 enrolled patients, 687 were married men. Polygamy was reported in 32% of married men (1 wife: 68%, 2 wives: 19%, 3 wives: 10%, and 4 wives: 3%). When stratified by number of wives, significant baseline differences were observed in age, type of community (rural versus urban), prior coronary artery bypass grafting (CABG), and household income. After adjusting for baseline differences, there was a significant association between polygamy and CAD (adjusted OR 4.6 [95% CI 2.5, 8.3]), multivessel disease (MVD) (adjusted OR 2.6 [95% CI 1.8, 3.7]), and left main disease (LMD) (adjusted OR 3.5 [95% CI 2.1, 5.9]). Findings were consistent when the number of wives was analyzed as a continuous variable. In conclusion, among married men undergoing coronary angiography for clinical indications, polygamy is associated with the presence of significant CAD, MVD, and LMD.

High-resolution myocardial stress perfusion at 3 T in patients with suspected coronary artery disease.

PubMed

Meyer, Carsten; Strach, Katharina; Thomas, Daniel; Litt, Harold; Nähle, Claas P; Tiemann, Klaus; Schwenger, Ulrich; Schild, Hans H; Sommer, Torsten

2008-02-01

To implement a high-resolution first-pass myocardial perfusion imaging protocol (HRPI) at 3 T, and to evaluate the feasibility, image quality and accuracy of this approach prospectively in patients with suspected CAD. We hypothesized that utilizing the gain in SNR at 3 T to increase spatial resolution would reduce partial volume effects and subendocardial dark rim artifacts in comparison to 1.5 T. HRPI studies were performed on 60 patients using a segmented k-space gradient echo sequence (in plane resolution 1.97 x 1.94 mm(2)). Semiquantitative assessment of dark rim artifacts was performed for the stress studies on a slice-by-slice basis. Qualitative visual analysis was compared to quantitative coronary angiography (QCA) results; hemodynamically significant CAD was defined as stenosis >or=70% at QCA. Dark rim artifacts appeared in 108 of 180 slices (average extent 1.3 +/- 1.2 mm representing 11.8 +/- 10.8% of the transmural myocardial thickness). Sensitivity, specifity, and test accuracy for the detection of significant CAD were 89%,79%, and 85%. HRPI studies at 3 T are feasible in a clinical setting, providing good image quality and high accuracy for detection of significant CAD. The presence of dark rim artifacts does not appear to represent a diagnostic problem when using a HRPI approach.

The CAD-score web server: contact area-based comparison of structures and interfaces of proteins, nucleic acids and their complexes.

PubMed

Olechnovič, Kliment; Venclovas, Ceslovas

2014-07-01

The Contact Area Difference score (CAD-score) web server provides a universal framework to compute and analyze discrepancies between different 3D structures of the same biological macromolecule or complex. The server accepts both single-subunit and multi-subunit structures and can handle all the major types of macromolecules (proteins, RNA, DNA and their complexes). It can perform numerical comparison of both structures and interfaces. In addition to entire structures and interfaces, the server can assess user-defined subsets. The CAD-score server performs both global and local numerical evaluations of structural differences between structures or interfaces. The results can be explored interactively using sortable tables of global scores, profiles of local errors, superimposed contact maps and 3D structure visualization. The web server could be used for tasks such as comparison of models with the native (reference) structure, comparison of X-ray structures of the same macromolecule obtained in different states (e.g. with and without a bound ligand), analysis of nuclear magnetic resonance (NMR) structural ensemble or structures obtained in the course of molecular dynamics simulation. The web server is freely accessible at: http://www.ibt.lt/bioinformatics/cad-score. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

A sensitive assay for ABCA1-mediated cholesterol efflux using BODIPY -cholesterol

USDA-ARS?s Scientific Manuscript database

Studies have shown a negative association between cellular cholesterol efflux and coronary artery disease (CAD). Standard protocol for quantifying cholesterol efflux involves labeling cells with [(3)H]cholesterol and measuring release of the labeled sterol. Using [(3)H]cholesterol is not ideal for...

Manipulation of Guaiacyl and Syringyl Monomer Biosynthesis in an Arabidopsis Cinnamyl Alcohol Dehydrogenase Mutant Results in Atypical Lignin Biosynthesis and Modified Cell Wall Structure

PubMed Central

Anderson, Nickolas A.; Tobimatsu, Yuki; Ciesielski, Peter N.; Ximenes, Eduardo; Ralph, John; Donohoe, Bryon S.; Ladisch, Michael; Chapple, Clint

2015-01-01

Modifying lignin composition and structure is a key strategy to increase plant cell wall digestibility for biofuel production. Disruption of the genes encoding both cinnamyl alcohol dehydrogenases (CADs), including CADC and CADD, in Arabidopsis thaliana results in the atypical incorporation of hydroxycinnamaldehydes into lignin. Another strategy to change lignin composition is downregulation or overexpression of ferulate 5-hydroxylase (F5H), which results in lignins enriched in guaiacyl or syringyl units, respectively. Here, we combined these approaches to generate plants enriched in coniferaldehyde-derived lignin units or lignins derived primarily from sinapaldehyde. The cadc cadd and ferulic acid hydroxylase1 (fah1) cadc cadd plants are similar in growth to wild-type plants even though their lignin compositions are drastically altered. In contrast, disruption of CAD in the F5H-overexpressing background results in dwarfism. The dwarfed phenotype observed in these plants does not appear to be related to collapsed xylem, a hallmark of many other lignin-deficient dwarf mutants. cadc cadd, fah1 cadc cadd, and cadd F5H-overexpressing plants have increased enzyme-catalyzed cell wall digestibility. Given that these CAD-deficient plants have similar total lignin contents and only differ in the amounts of hydroxycinnamaldehyde monomer incorporation, these results suggest that hydroxycinnamaldehyde content is a more important determinant of digestibility than lignin content. PMID:26265762

Stigma receptivity over the lifetime of the hermaphroditic flower of Elsholtzia rugulosa was negatively correlated with pollen viability.

PubMed

Zhang, Xin-Min; Wolfe, Lorne M

2016-12-01

Dichogamy is generally thought to be a mechanism that prevents self-fertilization in flowering plants. This study aims to investigate the relationships between floral age and stigma receptivity, style length and pollen viability, and define how floral characters avoid self-pollination in a gynodioecious Chinese plant, Elsholtzia rugulosa. We assessed the relationships between flower age and style length, stigma receptivity, and pollen viability in E. rugulosa. This species produces 2 forms with plants bearing either hermaphrodite flowers (H) or female flowers (F). Corolla length in F flowers was shorter than the corolla length of H flowers and produced no pollen. H flowers were protandrous, pollen release of H flowers occurred before stigma receptivity. Stigma receptivity was significantly positively correlated with style length in both F flowers and H flowers. Pollen viability in H flowers declined significantly with floral age. Our results suggest that self-pollination in H flowers is likely reduced by dichogamy because stigma receptivity and pollen viability were effectively separated in time. However, because H inflorescences typically have multiple flowers open at the same time means that geitonogamous selfing is not avoided.

Automated extraction of knowledge for model-based diagnostics

NASA Technical Reports Server (NTRS)

Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.

1990-01-01

The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.

HBOC-201 as an alternative to blood transfusion: efficacy and safety evaluation in a multicenter phase III trial in elective orthopedic surgery.

PubMed

Jahr, Jonathan S; Mackenzie, Colin; Pearce, L Bruce; Pitman, Arkadiy; Greenburg, A Gerson

2008-06-01

The ability of hemoglobin based oxygen carrier-201 (HBOC-201) to safely reduce and/or eliminate perioperative transfusion was studied in orthopedic surgery patients. A randomized, single-blind, packed red blood cell (PRBC)-controlled, parallel-group multicenter study was conducted. Six hundred eighty-eight patients were randomized to treatment with HBOC-201 (H, n = 350) or PRBC (R, n = 338) at the first transfusion decision. Primary endpoints were transfusion avoidance and blinded assessment [Mann-Whitney estimator (MW)] of safety noninferiority. Groups were compared directly and by paired/matching group analyses predicated on a prospectively defined dichotomy [treatment success (HH) vs. failure (HR)] in the H arm and an equivalently defined dichotomy [3 (R3+) units PRBC] in the R arm, based on need (moderate vs. high) for additional oxygen carrying capacity. A total of 59.4% of patients in the H arm avoided PRBC transfusion. Adverse events (8.47 vs. 5.88), and serious adverse events (SAEs) (0.35 vs. 0.25) per patient were higher in the H versus R arms (p < 0.001 and p < 0.01) with MW = 0.561 (95 CI 0.528-0.594). HH versus R3- had identical (0.14) serious adverse events/patient and a MW = 0.519 (95% confidence limit 0.481-0.558), whereas the incidence was higher (0.63 vs. 0.47) for HR versus R3+ with a MW = 0.605 (95% confidence limit 0.550-0.662). Age (>80 years), volume overload and undertreatment contributed to this imbalance. HBOC-201 eliminated transfusion in the majority of subjects. The between arms (H vs. R) safety analysis was unfavorable and likely related to patient age, volume overload, and undertreatment and was isolated to patients that could not be managed by HBOC-201 alone. However, patients <80 years old with moderate clinical need may safely avoid transfusion when treated with up to 10 units of HBOC-201.

[Myocardial uptake ratio of iodine-123 labeled beta-methyl iodophenylpentadecanoic acid (123I-BMIPP) in relation to the concentration of the substrates of energy].

PubMed

Tsuchimochi, S; Tamaki, N; Kawamoto, M; Tadamura, E; Fujita, T; Nohara, R; Matsumori, A; Sasayama, S; Yonekura, Y; Konishi, J

1995-06-01

Iodine-123 beta-methyl iodophenylpentadecanoic acid (BMIPP) has been used for evaluating myocardial fatty acid metabolism in vivo. The whole body BMIPP imaging was acquired in 26 patients (11 with HCM, 11 with CAD and 4 with DCM) to calculate % uptake in the myocardium and to correlate its uptake with biochemical data, including blood sugar (BS), nonesterified fatty acid (NEFA) and insulin in the blood. BMIPP was administered at rest with overnight fasting state, and the anterior and posterior whole body imaging was performed one hour later. The background corrected whole myocardial counts were calculated to obtain %BMIPP uptake. In addition, the heart to mediastinum count ratio (H/M ratio) was calculated from the mean counts in the heart and the upper mediastinum in the anterior view. The %BMIPP uptake was 3.70 +/- 1.22% and H/M ratio was 2.30 +/- 0.23. The patients with DCM showed higher %BMIPP uptake values (DCM = 5.58 +/- 0.67% vs. CAD = 3.09 +/- 0.97% and HCM = 3.63 +/- 0.86%, both p < 0.01), but similar values of H/M ratio with other patients (DCM = 2.43 +/- 0.20, CAD = 2.22 +/- 0.25 and HCM = 2.32 +/- 0.20). Although the biochemical data varied at the time of the tracer administration, they were not significantly correlated with the %BMIPP uptake or H/M ratio. However, there was a significant correlation between %BMIPP uptake and H/M ratio with the correlation coefficient of 0.80 (p < 0.001). We conclude that the myocardial uptake of BMIPP is not influenced by the plasma substrate level under the fasting state.

CAD Integration : new optical design possibilities

NASA Astrophysics Data System (ADS)

Haumonte, Jean-Baptiste; Venturino, Jean-Claude

2005-09-01

The development of optical design and analysis tools in a CAD software can help to optimise the design, size and performance of tomorrow's consumer products. While optics was still held back by software limitations, CAD programs were moving forward in leaps and bounds, improving manufacturing technologies and making it possible to design and produce highly innovative and sophisticated products. The problem was that in the past, 'traditional' optical design programs were only able to simulate spherical and aspherical lenses, meaning that the optical designers were limited to designing systems which were a series of imperfect lenses, each one correcting the last. That is why OPTIS has created the first optical design program to be fully integrated into a CAD program. The technology is available from OPTIS in an integrated SOLIDWORKS or CATIA V5 version. Users of this software can reduce the number of lenses needed in a system. Designers will now have access to complex surfaces such as NURBS meaning they will now be able to define free shape progressive lenses and even improve on optical performances using fewer lenses. This revolutionary technology will allow mechanical designers to work on optical systems and to share information with optical designers for the first time. Previously not possible in a CAD program you may now determine all the optical performances of any optical system, providing first order and third order performances, sequential and non-sequential ray-tracing, wavefront surfaces, point spread function, MTF, spot-diagram, using real optical surfaces and guaranteeing the mechanical precision necessary for an optical system.

Additive value of 3T cardiovascular magnetic resonance coronary angiography for detecting coronary artery disease.

PubMed

Zhang, Lijun; Song, Xiantao; Dong, Li; Li, Jianan; Dou, Ruiyu; Fan, Zhanming; An, Jing; Li, Debiao

2018-04-30

The purpose of the work was to evaluate the incremental diagnostic value of free-breathing, contrast-enhanced, whole-heart, 3 T cardiovascular magnetic resonance coronary angiography (CE-MRCA) to stress/rest myocardial perfusion imaging (MPI) and late gadolinium enhancement (LGE) imaging for detecting coronary artery disease (CAD). Fifty-one patients with suspected CAD underwent a comprehensive cardiovascular magnetic resonance (CMR) examination (CE-MRCA, MPI, and LGE). The additive diagnostic value of MRCA to MPI and LGE was evaluated using invasive x-ray coronary angiography (XA) as the standard for defining functionally significant CAD (≥ 50% stenosis in vessels > 2 mm in diameter). 90.2% (46/51) patients (54.0 ± 11.5 years; 71.7% men) completed CE-MRCA successfully. On per-patient basis, compared to MPI/LGE alone or MPI alone, the addition of MRCA resulted in higher sensitivity (100% vs. 76.5%, p < 0.01), no change in specificity (58.3% vs. 66.7%, p = 0.6), and higher accuracy (89.1% vs 73.9%, p < 0.01) for CAD detection (prevalence = 73.9%). Compared to LGE alone, the addition of CE-MRCA resulted in higher sensitivity (97.1% vs. 41.2%, p < 0.01), inferior specificity (83.3% vs. 91.7%, p = 0.02), and higher diagnostic accuracy (93.5% vs. 54.3%, p < 0.01). The inclusion of successful free-breathing, whole-heart, 3 T CE-MRCA significantly improved the sensitivity and diagnostic accuracy as compared to MPI and LGE alone for CAD detection.

Microscopical and chemical surface characterization of CAD/CAM zircona abutments after different cleaning procedures. A qualitative analysis

PubMed Central

2015-01-01

PURPOSE To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented. PMID:25932314

The effect of glazing and aging on the surface properties of CAD/CAM resin blocks

PubMed Central

Tuncer, Safa; Kara, Dilan; Demirci, Mustafa

2018-01-01

PURPOSE To investigate the effect of accelerated aging on surface properties of glazed CAD/CAM resin blocks using a 2D surface profilometer and a 3D non-contact optical profilometer. MATERIALS AND METHODS Three types of CAD/CAM resin restorative materials, LAVA Ultimate (3M ESPE, St Paul, MN, USA), VITA Enamic (Vita Zahnfabrik H. Rauter, Bad Säckingen, Germany), and Cerasmart (GC Corparation, Tokyo, Japan) were used for this study. CAD/CAM blocks were cut in 3-mm thickness slabs and divided into three groups; Group 1: control group (specimens polished with 600 grit SCI paper); Group 2: specimens sandblasted, silanized, and glazed with Optiglaze Color (GC); Group 3: glazed specimens subjected to 5000 thermocycles (n=15). The surface roughness (Ra and Rz) was evaluated using a profilometer and a 3D scanning instrument. Data were analyzed using two-way ANOVA and Tukey's post-hoc test (P<.05). RESULTS LAVA, VITA, and Cerasmart exhibited statistically similar Ra and Rz values for each group (P>.05). For VITA and Cerasmart, the specimens in Group 1 exhibited significantly higher Ra values than Group 2 (P<.05). Group 1 (0.502 Ra), Group 2 (0.384 Ra), and Group 3 (0.431 Ra) exhibited statistically similar Ra values for LAVA (P=.062). After 5000 thermocycles, surface roughness values did not change significantly for glazed LAVA, VITA, and Cerasmart (P>.05). CONCLUSION Glaze material Optiglaze Color makes CAD/CAM resin surfaces smooth and glazed CAD/CAM surfaces seem resistant to deterioration under 5000 thermocycles. PMID:29503714

The effect of glazing and aging on the surface properties of CAD/CAM resin blocks.

PubMed

Tekçe, Neslihan; Fidan, Sinan; Tuncer, Safa; Kara, Dilan; Demirci, Mustafa

2018-02-01

To investigate the effect of accelerated aging on surface properties of glazed CAD/CAM resin blocks using a 2D surface profilometer and a 3D non-contact optical profilometer. Three types of CAD/CAM resin restorative materials, LAVA Ultimate (3M ESPE, St Paul, MN, USA), VITA Enamic (Vita Zahnfabrik H. Rauter, Bad Säckingen, Germany), and Cerasmart (GC Corparation, Tokyo, Japan) were used for this study. CAD/CAM blocks were cut in 3-mm thickness slabs and divided into three groups; Group 1: control group (specimens polished with 600 grit SCI paper); Group 2: specimens sandblasted, silanized, and glazed with Optiglaze Color (GC); Group 3: glazed specimens subjected to 5000 thermocycles (n=15). The surface roughness (R a and R z ) was evaluated using a profilometer and a 3D scanning instrument. Data were analyzed using two-way ANOVA and Tukey's post-hoc test ( P <.05). LAVA, VITA, and Cerasmart exhibited statistically similar R a and R z values for each group ( P >.05). For VITA and Cerasmart, the specimens in Group 1 exhibited significantly higher R a values than Group 2 ( P <.05). Group 1 (0.502 R a ), Group 2 (0.384 R a ), and Group 3 (0.431 R a ) exhibited statistically similar R a values for LAVA ( P =.062). After 5000 thermocycles, surface roughness values did not change significantly for glazed LAVA, VITA, and Cerasmart ( P >.05). Glaze material Optiglaze Color makes CAD/CAM resin surfaces smooth and glazed CAD/CAM surfaces seem resistant to deterioration under 5000 thermocycles.

The relation between intensity and complexity of coronary artery lesion and oxidative stress in patients with acute coronary syndrome.

PubMed

Turan, Turhan; Menteşe, Ümit; Ağaç, Mustafa Tarık; Akyüz, Ali Rıza; Kul, Selim; Aykan, Ahmet Çağrı; Bektaş, Hüseyin; Korkmaz, Levent; Öztaş Menteşe, Seda; Dursun, İhsan; Çelik, Şükrü

2015-10-01

Oxidative stress plays a major role in the development of atherosclerosis. However, the relationship between oxidative stress and complexity and intensity of coronary artery disease is less clear. The aim of this study is to assess the relationship between oxidative stress markers and the complexity and intensity of coronary artery disease in patients with acute coronary syndrome (ACS). Sixty-seven consecutive patients with an early phase of ACS (<3 h) were included in this single-centre, cross-sectional, prospective study. Syntax and Gensini scores were calculated based on angiographic findings. Patients were divided into two CAD complexity groups according to their Syntax scores: low SYNTAX score (<22) and moderate to high SYNTAX score (>=22). Likewise patients were divided into two CAD severity groups according to the median Gensini score of 64: less intensive CAD with Gensini score (<64) and intensive CAD with Gensini score >=64. Blood samples were taken in 1 hour within administration in order to measure total oxidative status (TOS) and total antioxidant capacity (TAC) levels determined by Erel method. Oxidative stress index (OSI) was calculated by TOS /TAC. There was no significant difference between the two SYNTAX groups for oxidative stress markers. Median TOS and OSI values were significantly high in the intensive CAD group (p=0.005, p=0.04, respectively). The Gensini score was positively correlated with TOS and OSI (p=0.003, p=0.02, respectively). Oxidative stress markers may be considered supportive laboratory parameters related to CAD intensity but not complexity in ACS patients.

Noninvasive differential diagnosis of dental periapical lesions in cone-beam CT scans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okada, Kazunori, E-mail: kazokada@sfsu.edu; Rysavy, Steven; Flores, Arturo

Purpose: This paper proposes a novel application of computer-aided diagnosis (CAD) to an everyday clinical dental challenge: the noninvasive differential diagnosis of periapical lesions between periapical cysts and granulomas. A histological biopsy is the most reliable method currently available for this differential diagnosis; however, this invasive procedure prevents the lesions from healing noninvasively despite a report that they may heal without surgical treatment. A CAD using cone-beam computed tomography (CBCT) offers an alternative noninvasive diagnostic tool which helps to avoid potentially unnecessary surgery and to investigate the unknown healing process and rate for the lesions. Methods: The proposed semiautomatic solutionmore » combines graph-based random walks segmentation with machine learning-based boosted classifiers and offers a robust clinical tool with minimal user interaction. As part of this CAD framework, the authors provide two novel technical contributions: (1) probabilistic extension of the random walks segmentation with likelihood ratio test and (2) LDA-AdaBoost: a new integration of weighted linear discriminant analysis to AdaBoost. Results: A dataset of 28 CBCT scans is used to validate the approach and compare it with other popular segmentation and classification methods. The results show the effectiveness of the proposed method with 94.1% correct classification rate and an improvement of the performance by comparison with the Simon’s state-of-the-art method by 17.6%. The authors also compare classification performances with two independent ground-truth sets from the histopathology and CBCT diagnoses provided by endodontic experts. Conclusions: Experimental results of the authors show that the proposed CAD system behaves in clearer agreement with the CBCT ground-truth than with histopathology, supporting the Simon’s conjecture that CBCT diagnosis can be as accurate as histopathology for differentiating the periapical lesions.« less

Noninvasive differential diagnosis of dental periapical lesions in cone-beam CT scans.

PubMed

Okada, Kazunori; Rysavy, Steven; Flores, Arturo; Linguraru, Marius George

2015-04-01

This paper proposes a novel application of computer-aided diagnosis (CAD) to an everyday clinical dental challenge: the noninvasive differential diagnosis of periapical lesions between periapical cysts and granulomas. A histological biopsy is the most reliable method currently available for this differential diagnosis; however, this invasive procedure prevents the lesions from healing noninvasively despite a report that they may heal without surgical treatment. A CAD using cone-beam computed tomography (CBCT) offers an alternative noninvasive diagnostic tool which helps to avoid potentially unnecessary surgery and to investigate the unknown healing process and rate for the lesions. The proposed semiautomatic solution combines graph-based random walks segmentation with machine learning-based boosted classifiers and offers a robust clinical tool with minimal user interaction. As part of this CAD framework, the authors provide two novel technical contributions: (1) probabilistic extension of the random walks segmentation with likelihood ratio test and (2) LDA-AdaBoost: a new integration of weighted linear discriminant analysis to AdaBoost. A dataset of 28 CBCT scans is used to validate the approach and compare it with other popular segmentation and classification methods. The results show the effectiveness of the proposed method with 94.1% correct classification rate and an improvement of the performance by comparison with the Simon's state-of-the-art method by 17.6%. The authors also compare classification performances with two independent ground-truth sets from the histopathology and CBCT diagnoses provided by endodontic experts. Experimental results of the authors show that the proposed CAD system behaves in clearer agreement with the CBCT ground-truth than with histopathology, supporting the Simon's conjecture that CBCT diagnosis can be as accurate as histopathology for differentiating the periapical lesions.

Avoiding full corrections in dynamic SPECT images impacts the performance of SPECT myocardial blood flow quantitation.

PubMed

Wang, Lei; Wu, Dayong; Yang, Yong; Chen, Ing-Jou; Lin, Chih-Yuan; Hsu, Bailing; Fang, Wei; Tang, Yi-Da

2017-08-01

This study investigated the performance of SPECT myocardial blood flow (MBF) quantitation lacking full physical corrections (All Corr) in dynamic SPECT (DySPECT) images. Eleven healthy normal volunteers (HVT) and twenty-four patients with angiography-documented CAD were assessed. All Corr in 99m Tc-sestamibi DySPECT encompassed noise reduction (NR), resolution recovery (RR), and corrections for scatter (SC) and attenuation (AC), otherwise no correction (NC) or only partial corrections. The performance was evaluated by quality index (R 2 ) and blood-pool spillover index (FBV) in kinetic modeling, and by rest flow (RMBF) and stress flow (SMBF) compared with those of All Corr. In HVT group, NC diminished 2-fold flow uniformity with the most degraded quality (15%-18% reduced R 2 ) and elevated spillover effect (45%-50% increased FBV). Consistently higher RMBF and SMBF were discovered in both groups (HVT 1.54/2.31 higher; CAD 1.60/1.72; all P < .0001). Bland-Altman analysis revealed positive flow bias (HVT 0.9-2.6 mL/min/g; CAD 0.7-1.3) with wide ranges of 95% CI of agreement (HVT NC -1.9-7.1; NR -0.4-4.4; NR + SC -1.1-4.3; NR + SC + RR -0.7-2.5) (CAD NC -1.2-3.8; NR -1.0-2.8; NR + SC -1.0-2.5; NR + SC + RR -1.1-2.6). Uncorrected physical interference in DySPECT images can extensively impact the performance of MBF quantitation. Full physical corrections should be considered to warrant this tool for clinical utilization.

Genetic engineering with endothelial nitric oxide synthase improves functional properties of endothelial progenitor cells from patients with coronary artery disease: an in vitro study.

PubMed

Kaur, Savneet; Kumar, T R Santhosh; Uruno, Akira; Sugawara, Akira; Jayakumar, Karunakaran; Kartha, Chandrasekharan Cheranellore

2009-11-01

Recent studies have reported a marked impairment in the number and functions of endothelial progenitor cells (EPCs) in patients with coronary artery disease (CAD). In view of an important role of eNOS in angiogenesis, in the present study, we evaluated the effects of eNOS gene transfer in ex vivo expanded EPCs isolated from patients with CAD. The expanded EPCs were transfected with mammalian expression vector pcDNA3.1-eNOS containing the full-length human eNOS gene using lipofectamine. About 35-40% of the eNOS-EPCs had higher expression of eNOS as compared to untransfected EPCs. EPCs transfected with pcDNA3.0-EGFP, the plasmid vector expressing green fluorescent protein (GFP) were used as control. The untransfected, GFP-transfected and eNOS-transfected EPCs were compared in terms of important functional attributes of angiogenesis such as proliferation, migration, differentiation and adhesion/integration into tube-like structures in vitro. Functional studies revealed that in the presence of defined growth conditions, compared to the untransfected and GFP-transfected cells, eNOS-EPCs from patients with CAD have a significant increase in [3H] thymidine-labeled DNA (P < 0.01), migration (14.6 +/- 1.8 and 16.5 +/- 1.9 vs. 23.5 +/- 3.4 cells/field, P < 0.01), ability to differentiate into endothelial-like spindle-shaped cells (46 +/- 4.5 and 56.5 +/- 2.1 vs. 93.2 +/- 6.6 cells/field, P < 0.001) and also incorporation into tube-like structures on the matrigel (GFP-EPCs: 21.25 +/- 2.9 vs. GFP-eNOS-EPCs: 34.5 +/- 5.5 cells/field, P < 0.05). We conclude that eNOS gene transfection is a valuable approach to augment angiogenic properties of ex vivo expanded EPCs and eNOS-modified EPCs may offer significant advantages than EPCs alone in terms of their clinical use in patients with myocardial ischemia.

Predicting Long-term Ischemic Events Using Routine Clinical Parameters in Patients with Coronary Artery Disease: The OPT-CAD Risk Score.

PubMed

Han, Yaling; Chen, Jiyan; Qiu, Miaohan; Li, Yi; Li, Jing; Feng, Yingqing; Qiu, Jian; Meng, Liang; Sun, Yihong; Tao, Guizhou; Wu, Zhaohui; Yang, Chunyu; Guo, Jincheng; Pu, Kui; Chen, Shaoliang; Wang, Xiaozeng

2018-06-05

The prognosis of patients with coronary artery disease (CAD) at hospital discharge was constantly varying, and post-discharge risk of ischemic events remain a concern. However, risk prediction tools to identify risk of ischemia for these patients has not yet been reported. We sought to develop a scoring system for predicting long-term ischemic events in CAD patients receiving antiplatelet therapy that would be beneficial in appropriate personalized decision-making for these patients. In this prospective Optimal antiPlatelet Therapy for Chinese patients with Coronary Artery Disease (OPT-CAD, NCT01735305) registry, a total of 14,032 patients with CAD receiving at least one kind of antiplatelet agent were enrolled from 107 centers across China, from January 2012 to March 2014. The risk scoring system was developed in a derivation cohort (enrolled initially 10,000 patients in the database) using a logistic regression model and was subsequently tested in a validation cohort (the last 4,032 patients). Points in risk score was assigned based on the multivariable odds ratio of each factor. Ischemic events were defined as the composite of cardiac death, myocardial infarction or stroke. Ischemic events occurred in 342 (3.4%) patients in the derivation cohort and 160 (4.0%) patients in the validation cohort during 1-year follow-up. The OPT-CAD score, ranging from 0-257 points, consist of 10 independent risk factors, including age (0-71 points), heart rates (0-36 points), hypertension (0-20 points), prior myocardial infarction (16 points), prior stroke (16 points), renal insufficient (21 points), anemia (19 points), low ejection fraction (22 points), positive cardiac troponin (23 points) and ST-segment deviation (13 points). In predicting 1-year ischemic events, the area under receiver operating characteristics curve were 0.73 and 0.72 in derivation and validation cohort, respectively. The incidences of ischemic events in low- (0-90 points), medium- (91-150 points) and high-risk (≥151 points) patients were 1.6%, 5.5%, and 15.0%, respectively. Compared to GRACE score, OPT-CAD score had a better discrimination in predicting ischemic events and all-cause mortality (ischemic events: 0.72 vs 0.65, all-cause mortality: 0.79 vs 0.72, both P<0.001). Among CAD patients, a risk score based on 10 baseline clinical variables performed better than the GRACE risk score in predicting long-term ischemic events. However, further research is needed to assess the value of the OPT-CAD score in guiding the management of antiplatelet therapy for patients with CAD. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Relationship between homocysteine and coronary artery disease. Results from a large prospective cohort study.

PubMed

Schaffer, Alon; Verdoia, Monica; Cassetti, Ettore; Marino, Paolo; Suryapranata, Harry; De Luca, Giuseppe

2014-08-01

Coronary artery disease (CAD) still represents the major cause of mortality in developed countries. Large research programs have been focused on the identification of new risk factors to prevent CAD, with special attention to homocysteine (Hcy), due to the known associated increased thrombogenicity, oxidative stress status and endothelial dysfunction. However, controversy still exists on the association between Hcy and CAD. Therefore, aim of the current study was to investigate the association of Hcy with the prevalence and extent of CAD in a large consecutive cohort of patients undergoing coronary angiography. Our population is represented by a total of 3056 consecutive patients undergoing coronary angiography between at the Azienda Ospedaliera "Maggiore della Carità", Novara, Italy. Fasting samples were collected for homocysteine levels assessment. Coronary disease was defined for at least 1 vessel stenosis>50% as evaluated by QCA. Study population was divided according to Hcy tertiles (<13,3, 13,3-18.2, >18.2nmol/ml). High plasmatic level of homocysteine was related with age (p<0.001), male gender (p<0.001), hypertension (p<0.001) renal failure (p<0.001), family history of CAD (p<0.001), previous cerebrovascular accident (p<0.001), previous MI (p=0.002), previous CABG (p=0.003), ejection fraction (p<0.001), higher baseline creatinine (p<0.001), in treatment with nitrates (p<0.001), calcium antagonists (p<0.001), diuretics (p<0.001), Ace inhibitors (ACE-I) (p=0.006), Clopidogrel (p=0.05), haemoglobin (p=0.001), white blood cells (WBC) count (p=0.008), total cholesterol (p=0.04), Low-Density Lipoproteins (LDL) (p=0.01). A significant relationship was found between Hcy levels and the extent of coronary artery disease (71.8% vs 77.8% vs 77.4%, OR[95%CI]=1.18[1.11-1.252.], p<0.001 and severe CAD (23.6% vs 29.5% vs 32.1%, OR [95%CI]=1.275 [1.209-1.344], p<0.001). Elevated Hcy was significantly associated with increased risk of CAD (adjusted OR[95%CI]=1.087[1.009-1.171], p=0.02 and severe CAD (adjusted OR [95%CI]=1.07 [1.01-1.16, P=0.04]). The results were confirmed in the majority of high risk subsets of patients. This study showed that high levels of plasmatic Hcy are independently associated with CAD. Further large studies are certainly needed to explore the adjunctive benefits from vitamin administration in patients with elevated Hcy to prevent the occurrence and progression of CAD. Copyright © 2014 Elsevier Ltd. All rights reserved.

Learning Reverse Engineering and Simulation with Design Visualization

NASA Technical Reports Server (NTRS)

Hemsworth, Paul J.

2018-01-01

The Design Visualization (DV) group supports work at the Kennedy Space Center by utilizing metrology data with Computer-Aided Design (CAD) models and simulations to provide accurate visual representations that aid in decision-making. The capability to measure and simulate objects in real time helps to predict and avoid potential problems before they become expensive in addition to facilitating the planning of operations. I had the opportunity to work on existing and new models and simulations in support of DV and NASA’s Exploration Ground Systems (EGS).

Widowhood and severity of coronary artery disease: a multicenter study.

PubMed

Daoulah, Amin; Alama, Mohamed N; Elkhateeb, Osama E; Al-Murayeh, Mushabab; Al-Kaabi, Salem; Al-Faifi, Salem M; Alosaimi, Hind M; Lotfi, Amir; Asiri, Khalid S; Elimam, Ahmed M; Abougalambo, Ayman S; Murad, Waheed; Haddara, Mamdouh M; Dixon, Ciaran M; Alsheikh-Ali, Alawi A

2017-03-01

The aim of this study was to assess the association of widowhood with the severity and extent of coronary artery disease (CAD), and whether it is modified by sex or socioeconomic status. A total of 1068 patients undergoing coronary angiography at five centers in Saudi Arabia and the United Arab Emirates were included in the study. CAD was defined as more than 70% lumen stenosis in a major epicardial vessel or more than 50% in the left main coronary artery. Multivessel disease was defined as more than one diseased vessel. Of 1068 patients, 65 (6%) were widowed. Widowed patients were older (65±15 vs. 59±12), more likely to be female (75 vs. 25%), less likely to be smokers (18 vs. 47%), of lower economic and education status, and more likely to have undergone coronary angiography for urgent/emergent indications (75 vs. 61%) (P<0.05 for all). There was a significant association between widowhood and the number of coronary arteries with more than 70% lumen stenosis. Consequently, such a high degree of lumen stenosis in those who were widowed was more likely to require coronary artery bypass graft surgery (38 vs. 16%; P<0.01). After adjusting for baseline differences, widowhood was associated with a significantly higher odds of CAD [adjusted odds ratio (OR) 3.6; 95% confidence interval (CI) 1.2-10.5] and multivessel disease (adjusted OR 4.6; 95% CI 2.2-9.6), but not left main disease (adjusted OR 1.3; 95% CI 0.5-3.1). All associations were consistent in men and women and not modified by age, community setting (urban vs. rural), employment, income, or educational levels (Pinteraction>0.1 for all). Widowhood is associated with the severity and extent of CAD. The association is not modified by sex or socioeconomic status.

Postmenopausal Women with a History of Irregular Menses and Elevated Androgen Measurements at High Risk for Worsening Cardiovascular Event-Free Survival: Results from the National Institutes of Health—National Heart, Lung, and Blood Institute Sponsored Women’s Ischemia Syndrome Evaluation

PubMed Central

Shaw, Leslee J.; Bairey Merz, C. Noel; Azziz, Ricardo; Stanczyk, Frank Z.; Sopko, George; Braunstein, Glenn D.; Kelsey, Sheryl F.; Kip, Kevin E.; Cooper-DeHoff, Rhonda M.; Johnson, B. Delia; Vaccarino, Viola; Reis, Steven E.; Bittner, Vera; Hodgson, T. Keta; Rogers, William; Pepine, Carl J.

2008-01-01

Background: Women with polycystic ovary syndrome (PCOS) have a greater clustering of cardiac risk factors. However, the link between PCOS and cardiovascular (CV) disease is incompletely described. Objective: The aim of this analysis was to evaluate the risk of CV events in 390 postmenopausal women enrolled in the National Institutes of Health–National Heart, Lung, and Blood Institute (NIH-NHLBI) sponsored Women’s Ischemia Syndrome Evaluation (WISE) study according to clinical features of PCOS. Methods: A total of 104 women had clinical features of PCOS defined by a premenopausal history of irregular menses and current biochemical evidence of hyperandrogenemia. Hyperandrogenemia was defined as the top quartile of androstenedione (≥701 pg/ml), testosterone (≥30.9 ng/dl), or free testosterone (≥4.5 pg/ml). Cox proportional hazard model was fit to estimate CV death or myocardial infarction (n = 55). Results: Women with clinical features of PCOS were more often diabetic (P < 0.0001), obese (P = 0.005), had the metabolic syndrome (P < 0.0001), and had more angiographic coronary artery disease (CAD) (P = 0.04) compared to women without clinical features of PCOS. Cumulative 5-yr CV event-free survival was 78.9% for women with clinical features of PCOS (n = 104) vs. 88.7% for women without clinical features of PCOS (n = 286) (P = 0.006). PCOS remained a significant predictor (P < 0.01) in prognostic models including diabetes, waist circumference, hypertension, and angiographic CAD as covariates. Conclusion: Among postmenopausal women evaluated for suspected ischemia, clinical features of PCOS are associated with more angiographic CAD and worsening CV event-free survival. Identification of postmenopausal women with clinical features of PCOS may provide an opportunity for risk factor intervention for the prevention of CAD and CV events. PMID:18182456

Postmenopausal women with a history of irregular menses and elevated androgen measurements at high risk for worsening cardiovascular event-free survival: results from the National Institutes of Health--National Heart, Lung, and Blood Institute sponsored Women's Ischemia Syndrome Evaluation.

PubMed

Shaw, Leslee J; Bairey Merz, C Noel; Azziz, Ricardo; Stanczyk, Frank Z; Sopko, George; Braunstein, Glenn D; Kelsey, Sheryl F; Kip, Kevin E; Cooper-Dehoff, Rhonda M; Johnson, B Delia; Vaccarino, Viola; Reis, Steven E; Bittner, Vera; Hodgson, T Keta; Rogers, William; Pepine, Carl J

2008-04-01

Women with polycystic ovary syndrome (PCOS) have a greater clustering of cardiac risk factors. However, the link between PCOS and cardiovascular (CV) disease is incompletely described. The aim of this analysis was to evaluate the risk of CV events in 390 postmenopausal women enrolled in the National Institutes of Health-National Heart, Lung, and Blood Institute (NIH-NHLBI) sponsored Women's Ischemia Syndrome Evaluation (WISE) study according to clinical features of PCOS. A total of 104 women had clinical features of PCOS defined by a premenopausal history of irregular menses and current biochemical evidence of hyperandrogenemia. Hyperandrogenemia was defined as the top quartile of androstenedione (> or = 701 pg/ml), testosterone (> or = 30.9 ng/dl), or free testosterone (> or = 4.5 pg/ml). Cox proportional hazard model was fit to estimate CV death or myocardial infarction (n = 55). Women with clinical features of PCOS were more often diabetic (P < 0.0001), obese (P = 0.005), had the metabolic syndrome (P < 0.0001), and had more angiographic coronary artery disease (CAD) (P = 0.04) compared to women without clinical features of PCOS. Cumulative 5-yr CV event-free survival was 78.9% for women with clinical features of PCOS (n = 104) vs. 88.7% for women without clinical features of PCOS (n = 286) (P = 0.006). PCOS remained a significant predictor (P < 0.01) in prognostic models including diabetes, waist circumference, hypertension, and angiographic CAD as covariates. Among postmenopausal women evaluated for suspected ischemia, clinical features of PCOS are associated with more angiographic CAD and worsening CV event-free survival. Identification of postmenopausal women with clinical features of PCOS may provide an opportunity for risk factor intervention for the prevention of CAD and CV events.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sels, Seppe, E-mail: Seppe.Sels@uantwerpen.be; Ribbens, Bart; Mertens, Luc

Scanning laser Doppler vibrometers (LDV) are used to measure full-field vibration shapes of products and structures. In most commercially available scanning laser Doppler vibrometer systems the user manually draws a grid of measurement locations on a 2D camera image of the product. The determination of the correct physical measurement locations can be a time consuming and diffcult task. In this paper we present a new methodology for product testing and quality control that integrates 3D imaging techniques with vibration measurements. This procedure allows to test prototypes in a shorter period because physical measurements locations will be located automatically. The proposedmore » methodology uses a 3D time-of-flight camera to measure the location and orientation of the test-object. The 3D image of the time-of-flight camera is then matched with the 3D-CAD model of the object in which measurement locations are pre-defined. A time of flight camera operates strictly in the near infrared spectrum. To improve the signal to noise ratio in the time-of-flight measurement, a time-of-flight camera uses a band filter. As a result of this filter, the laser spot of most laser vibrometers is invisible in the time-of-flight image. Therefore a 2D RGB-camera is used to find the laser-spot of the vibrometer. The laser spot is matched to the 3D image obtained by the time-of-flight camera. Next an automatic calibration procedure is used to aim the laser at the (pre)defined locations. Another benefit from this methodology is that it incorporates automatic mapping between a CAD model and the vibration measurements. This mapping can be used to visualize measurements directly on a 3D CAD model. Secondly the orientation of the CAD model is known with respect to the laser beam. This information can be used to find the direction of the measured vibration relatively to the surface of the object. With this direction, the vibration measurements can be compared more precisely with numerical experiments.« less

Effect of CPAP on diastolic function in coronary artery disease patients with nonsleepy obstructive sleep apnea: A randomized controlled trial.

PubMed

Glantz, Helena; Johansson, Magnus C; Thunström, Erik; Guron, Cecilia Wallentin; Uzel, Harun; Saygin, Mustafa; Herlitz, Johan; Peker, Yüksel

2017-08-15

Obstructive sleep apnea (OSA) has been associated with worse diastolic function in patients with coronary artery disease (CAD). This analysis determined whether continuous positive airway pressure (CPAP) treatment would improve diastolic function in CAD patients with nonsleepy OSA. Between December 2005 and November 2010, 244 revascularized CAD patients with nonsleepy OSA (apnea-hypopnea index (AHI) ≥15/h, Epworth Sleepiness Scale [ESS] score<10) were randomly assigned to CPAP or no-CPAP. Echocardiographic measurements were obtained at baseline, and after 3 and 12months. A total of 171 patients with preserved left ventricular ejection fraction (≥50%), no atrial fibrillation or severe valve abnormalities, and technically adequate echocardiograms at baseline and follow-up visits were included (CPAP, n=87; no-CPAP, n=84). In the intention-to-treat analysis, CPAP had no significant effect on echocardiographic parameters of mild (enlarged left atrium or decreased diastolic relaxation velocity) or worse (increased E/é filling index [presumed elevated left ventricular filling pressure]) diastolic function. Post-hoc analysis revealed a significant association between CPAP usage for ≥4h/night and an increase in diastolic relaxation velocity at 12months' follow-up (odds ratio 2.3, 95% confidence interval 1.0-4.9; p=0.039) after adjustment for age, sex, body mass index, and left atrium diameter at baseline. CPAP did not improve diastolic dysfunction in CAD patients with nonsleepy OSA. However, good CPAP adherence was significantly associated with an increase in diastolic relaxation velocity after one year. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Association of Endodontic Lesions with Coronary Artery Disease.

PubMed

Liljestrand, J M; Mäntylä, P; Paju, S; Buhlin, K; Kopra, K A E; Persson, G R; Hernandez, M; Nieminen, M S; Sinisalo, J; Tjäderhane, L; Pussinen, P J

2016-11-01

An endodontic lesion (EL) is a common manifestation of endodontic infection where Porphyromonas endodontalis is frequently encountered. EL may associate with increased risk for coronary artery disease (CAD) via similar pathways as marginal periodontitis. The aim of this cross-sectional study was to delineate the associations between EL and CAD. Subgingival P. endodontalis, its immune response, and serum lipopolysaccharide were examined as potential mediators between these 2 diseases. The Finnish Parogene study consists of 508 patients (mean age, 62 y) who underwent coronary angiography and extensive clinical and radiographic oral examination. The cardiovascular outcomes included no significant CAD ( n = 123), stable CAD ( n = 184), and acute coronary syndrome (ACS; n = 169). EL was determined from a panoramic tomography. We combined data of widened periapical spaces (WPSs) and apical rarefactions to a score of EL: 1, no EL ( n = 210); 2, ≥1 WPS per 1 apical rarefaction ( n = 222); 3, ≥2 apical rarefactions ( n = 76). Subgingival P. endodontalis was defined by checkerboard DNA-DNA hybridization analysis, and corresponding serum antibodies were determined by ELISA. In our population, 50.4% had WPSs, and 22.8% apical rarefactions. A total of 51.2% of all teeth with apical rarefactions had received endodontic procedures. Subgingival P. endodontalis levels and serum immunoglobulin G were associated with a higher EL score. In the multiadjusted model (age, sex, smoking, diabetes, body mass index, alveolar bone loss, and number of teeth), having WPSs associated with stable CAD (odds ratio [OR] = 1.94, 95% confidence interval [95% CI] = 1.13 to 3.32, P = 0.016) and highest EL score were associated with ACS (OR = 2.46, 95% CI = 1.09 to 5.54, P = 0.030). This association was especially notable in subjects with untreated teeth with apical rarefactions ( n = 59, OR = 2.72, 95% CI = 1.16 to 6.40, P = 0.022). Our findings support the hypothesis that ELs are independently associated with CAD and in particular with ACS. This is of high interest from a public health perspective, considering the high prevalence of ELs and CAD.

TU-G-204-09: The Effects of Reduced- Dose Lung Cancer Screening CT On Lung Nodule Detection Using a CAD Algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, S; Lo, P; Kim, G

2015-06-15

Purpose: While Lung Cancer Screening CT is being performed at low doses, the purpose of this study was to investigate the effects of further reducing dose on the performance of a CAD nodule-detection algorithm. Methods: We selected 50 cases from our local database of National Lung Screening Trial (NLST) patients for which we had both the image series and the raw CT data from the original scans. All scans were acquired with fixed mAs (25 for standard-sized patients, 40 for large patients) on a 64-slice scanner (Sensation 64, Siemens Healthcare). All images were reconstructed with 1-mm slice thickness, B50 kernel.more » 10 of the cases had at least one nodule reported on the NLST reader forms. Based on a previously-published technique, we added noise to the raw data to simulate reduced-dose versions of each case at 50% and 25% of the original NLST dose (i.e. approximately 1.0 and 0.5 mGy CTDIvol). For each case at each dose level, the CAD detection algorithm was run and nodules greater than 4 mm in diameter were reported. These CAD results were compared to “truth”, defined as the approximate nodule centroids from the NLST reports. Subject-level mean sensitivities and false-positive rates were calculated for each dose level. Results: The mean sensitivities of the CAD algorithm were 35% at the original dose, 20% at 50% dose, and 42.5% at 25% dose. The false-positive rates, in decreasing-dose order, were 3.7, 2.9, and 10 per case. In certain cases, particularly in larger patients, there were severe photon-starvation artifacts, especially in the apical region due to the high-attenuating shoulders. Conclusion: The detection task was challenging for the CAD algorithm at all dose levels, including the original NLST dose. However, the false-positive rate at 25% dose approximately tripled, suggesting a loss of CAD robustness somewhere between 0.5 and 1.0 mGy. NCI grant U01 CA181156 (Quantitative Imaging Network); Tobacco Related Disease Research Project grant 22RT-0131.« less

Automatic classification of tissue malignancy for breast carcinoma diagnosis.

PubMed

Fondón, Irene; Sarmiento, Auxiliadora; García, Ana Isabel; Silvestre, María; Eloy, Catarina; Polónia, António; Aguiar, Paulo

2018-05-01

Breast cancer is the second leading cause of cancer death among women. Its early diagnosis is extremely important to prevent avoidable deaths. However, malignancy assessment of tissue biopsies is complex and dependent on observer subjectivity. Moreover, hematoxylin and eosin (H&E)-stained histological images exhibit a highly variable appearance, even within the same malignancy level. In this paper, we propose a computer-aided diagnosis (CAD) tool for automated malignancy assessment of breast tissue samples based on the processing of histological images. We provide four malignancy levels as the output of the system: normal, benign, in situ and invasive. The method is based on the calculation of three sets of features related to nuclei, colour regions and textures considering local characteristics and global image properties. By taking advantage of well-established image processing techniques, we build a feature vector for each image that serves as an input to an SVM (Support Vector Machine) classifier with a quadratic kernel. The method has been rigorously evaluated, first with a 5-fold cross-validation within an initial set of 120 images, second with an external set of 30 different images and third with images with artefacts included. Accuracy levels range from 75.8% when the 5-fold cross-validation was performed to 75% with the external set of new images and 61.11% when the extremely difficult images were added to the classification experiment. The experimental results indicate that the proposed method is capable of distinguishing between four malignancy levels with high accuracy. Our results are close to those obtained with recent deep learning-based methods. Moreover, it performs better than other state-of-the-art methods based on feature extraction, and it can help improve the CAD of breast cancer. Copyright © 2018 Elsevier Ltd. All rights reserved.

A study of the role of GATA4 polymorphism in cardiovascular metabolic disorders

PubMed Central

2013-01-01

Background The study was designed to evaluate the association of GATA4 gene polymorphism with coronary artery disease (CAD) and its metabolic risk factors, including dyslipidaemic disorders, obesity, type 2 diabetes and hypertension, following a preliminary study linking early onset of CAD in heterozygous familial hypercholesterolaemia to chromosome 8, which harbours the GATA4 gene. Results We first sequenced the whole GATA4 gene in 250 individuals to identify variants of interest and then investigated the association of 12 single-nucleotide polymorphisms (SNPs) with the disease traits using Taqman chemistry in 4,278 angiographed Saudi individuals. Of the studied SNPs, rs804280 (1.14 (1.03 to 1.27); p = 0.009) was associated with CAD (2,274 cases vs 2,004 controls), hypercholesterolaemia (1,590 vs 2,487) (1.61 (1.03–2.52); p = 0.037) and elevated low-density lipoprotein-cholesterol (hLDLC) (575 vs 3,404) (1.87 (1.10–3.15); p = 0.020). Additionally, rs3729855_T (1.52 (1.09–2.11; p = 0.013)) and rs17153743 (AG + GG) (2.30 (1.30–4.26); p = 0.005) were implicated in hypertension (3,312 vs 966), following adjustments for confounders. Furthermore, haplotypes CCCGTGCC (χ2 = 4.71; p = 0.041) and GACCCGTG (χ2 = 3.84; p = 0.050) constructed from the SNPs were associated with CAD and ACCCACGC (χ2 = 6.58; p = 0.010) with myocardial infarction, while hypercholesterolaemia (χ2 = 3.86; p = 0.050) and hLDLC (χ2 = 4.94; p = 0.026) shared the AACCCATGT, and AACCCATGTC was associated with hLDLC (χ2 = 4.83; p = 0.028). A 10-mer GACCCGCGCC (χ2 = 7.59; p = 0.006) was associated with obesity (1,631 vs 2,362), and the GACACACCC (χ2 = 4.05; p = 0.044) was implicated in type 2 diabetes mellitus 2,378 vs 1,900). Conclusion Our study implicates GATA4 in CAD and its metabolic risk traits. The finding also points to the possible involvement of yet undefined entities related to GATA4 transcription activity or gene regulatory pathways in events leading to these cardiovascular disorders. PMID:24330461

Cost evaluation of cardiovascular magnetic resonance versus coronary angiography for the diagnostic work-up of coronary artery disease: application of the European Cardiovascular Magnetic Resonance registry data to the German, United Kingdom, Swiss, and United States health care systems.

PubMed

Moschetti, Karine; Muzzarelli, Stefano; Pinget, Christophe; Wagner, Anja; Pilz, Günther; Wasserfallen, Jean-Blaise; Schulz-Menger, Jeanette; Nothnagel, Detle; Dill, Torsten; Frank, Herbert; Lombardi, Massimo; Bruder, Oliver; Mahrholdt, Heiko; Schwitter, Jürg

2012-06-14

Cardiovascular magnetic resonance (CMR) has favorable characteristics for diagnostic evaluation and risk stratification of patients with known or suspected CAD. CMR utilization in CAD detection is growing fast. However, data on its cost-effectiveness are scarce. The goal of this study is to compare the costs of two strategies for detection of significant coronary artery stenoses in patients with suspected coronary artery disease (CAD): 1) Performing CMR first to assess myocardial ischemia and/or infarct scar before referring positive patients (defined as presence of ischemia and/or infarct scar to coronary angiography (CXA) versus 2) a hypothetical CXA performed in all patients as a single test to detect CAD. A subgroup of the European CMR pilot registry was used including 2,717 consecutive patients who underwent stress-CMR. From these patients, 21% were positive for CAD (ischemia and/or infarct scar), 73% negative, and 6% uncertain and underwent additional testing. The diagnostic costs were evaluated using invoicing costs of each test performed. Costs analysis was performed from a health care payer perspective in German, United Kingdom, Swiss, and United States health care settings. In the public sectors of the German, United Kingdom, and Swiss health care systems, cost savings from the CMR-driven strategy were 50%, 25% and 23%, respectively, versus outpatient CXA. If CXA was carried out as an inpatient procedure, cost savings were 46%, 50% and 48%, respectively. In the United States context, cost savings were 51% when compared with inpatient CXA, but higher for CMR by 8% versus outpatient CXA. This analysis suggests that from an economic perspective, the use of CMR should be encouraged as a management option for patients with suspected CAD.

Prognosis of complete versus incomplete revascularisation of patients with STEMI with multivessel coronary artery disease: an observational study

PubMed Central

Dimitriu-Leen, Aukelien C; Hermans, Maaike P J; Veltman, Caroline E; van der Hoeven, Bas L; van Rosendael, Alexander R; van Zwet, Erik W; Schalij, Martin J; Delgado, Victoria; Bax, Jeroen J; Scholte, Arthur J H A

2017-01-01

Objective The best strategy in patients with acute ST-segment elevation myocardial infarction (STEMI) with multivessel coronary artery disease (CAD) regarding completeness of revascularisation of the non-culprit lesion(s) is still unclear. To establish which strategy should be followed, survival rates over a longer period should be evaluated. The aim of this study was to investigate whether complete revascularisation, compared with incomplete revascularisation, is associated with reduced short-term and long-term all-cause mortality in patients with first STEMI and multivessel CAD. Methods This retrospective study consisted of 518 patients with first STEMI with multivessel CAD. Complete revascularisation (45%) was defined as the treatment of any significant coronary artery stenosis (≥70% luminal narrowing) during primary or staged percutaneous coronary intervention prior to discharge. The primary end point was all-cause mortality. Results Incomplete revascularisation was not independently associated with 30-day all-cause mortality in patients with acute first STEMI and multivessel CAD (OR 1.98; 95% CI 0.62to6.37; p=0.25). During a median long-term follow-up of 6.7 years, patients with STEMI with multivessel CAD and incomplete revascularisation showed higher mortality rates compared with patients who received complete revascularisation (24% vs 12%, p<0.001), and these differences remained after excluding the first 30 days. However, in multivariate analysis, incomplete revascularisation was not independently associated with increased all-cause mortality during long-term follow-up in the group of patients with STEMI who survived the first 30 days post-STEMI (HR 1.53 95% CI 0.89-2.61, p=0.12). Conclusion In patients with acute first STEMI and multivessel CAD, incomplete revascularisation compared with complete revascularisation was not independently associated with increased short-term and long-term all-cause mortality. PMID:28409009

Polygamy and Risk of Coronary Artery Disease in Men Undergoing Angiography: An Observational Study

PubMed Central

Lotfi, Amir; Al-Murayeh, Mushabab; Al-kaabi, Salem; Al-Faifi, Salem M.; Alama, Mohamed N.; Hersi, Ahmad S.; Dixon, Ciaran M.; Ahmed, Waleed; Al-Shehri, Mohamed; Youssef, Ali; Elimam, Ahmed Moustafa; Abougalambou, Ayman S.; Murad, Waheed; Alsheikh-Ali, Alawi A.

2017-01-01

Epidemiologic evidence suggests a link between psychosocial risk factors such as marital status and coronary artery disease (CAD). Polygamy (multiple concurrent wives) is a distinct marital status practiced in many countries in Asia and the Middle East, but its association with CAD is not well defined. We conducted a multicenter, observational study of consecutive patients undergoing coronary angiography during the period from April 1, 2013, to March 30, 2014. Of 1,068 enrolled patients, 687 were married men. Polygamy was reported in 32% of married men (1 wife: 68%, 2 wives: 19%, 3 wives: 10%, and 4 wives: 3%). When stratified by number of wives, significant baseline differences were observed in age, type of community (rural versus urban), prior coronary artery bypass grafting (CABG), and household income. After adjusting for baseline differences, there was a significant association between polygamy and CAD (adjusted OR 4.6 [95% CI 2.5, 8.3]), multivessel disease (MVD) (adjusted OR 2.6 [95% CI 1.8, 3.7]), and left main disease (LMD) (adjusted OR 3.5 [95% CI 2.1, 5.9]). Findings were consistent when the number of wives was analyzed as a continuous variable. In conclusion, among married men undergoing coronary angiography for clinical indications, polygamy is associated with the presence of significant CAD, MVD, and LMD. PMID:28250991

Rationale and design of the dual-energy computed tomography for ischemia determination compared to "gold standard" non-invasive and invasive techniques (DECIDE-Gold): A multicenter international efficacy diagnostic study of rest-stress dual-energy computed tomography angiography with perfusion.

PubMed

Truong, Quynh A; Knaapen, Paul; Pontone, Gianluca; Andreini, Daniele; Leipsic, Jonathon; Carrascosa, Patricia; Lu, Bin; Branch, Kelley; Raman, Subha; Bloom, Stephen; Min, James K

2015-10-01

Dual-energy CT (DECT) has potential to improve myocardial perfusion for physiologic assessment of coronary artery disease (CAD). Diagnostic performance of rest-stress DECT perfusion (DECTP) is unknown. DECIDE-Gold is a prospective multicenter study to evaluate the accuracy of DECT to detect hemodynamic (HD) significant CAD, as compared to fractional flow reserve (FFR) as a reference standard. Eligible participants are subjects with symptoms of CAD referred for invasive coronary angiography (ICA). Participants will undergo DECTP, which will be performed by pharmacological stress, and participants will subsequently proceed to ICA and FFR. HD-significant CAD will be defined as FFR ≤ 0.80. In those undergoing myocardial stress imaging (MPI) by positron emission tomography (PET), single photon emission computed tomography (SPECT) or cardiac magnetic resonance (CMR) imaging, ischemia will be graded by % ischemic myocardium. Blinded core laboratory interpretation will be performed for CCTA, DECTP, MPI, ICA, and FFR. Primary endpoint is accuracy of DECTP to detect ≥1 HD-significant stenosis at the subject level when compared to FFR. Secondary and tertiary endpoints are accuracies of combinations of DECTP at the subject and vessel levels compared to FFR and MPI. DECIDE-Gold will determine the performance of DECTP for diagnosing ischemia.

Rechargeable infection-responsive antifungal denture materials.

PubMed

Cao, Z; Sun, X; Yeh, C-K; Sun, Y

2010-12-01

Candida-associated denture stomatitis (CADS) is a significant clinical concern. We developed rechargeable infection-responsive antifungal denture materials for potentially managing the disease. Polymethacrylic acid (PMAA) was covalently bound onto diurethane dimethacrylate denture resins in the curing step. The PMAA resins bound cationic antifungal drugs such as miconazole and chlorhexidine digluconate (CG) through ionic interactions. The anticandidal activities of the drug-containing PMAA-resin discs were sustained for a prolonged period of time (weeks and months). Drug release was much faster at acidic conditions (pH 5) than at pH 7. Drugs bound to the denture materials could be "washed out" by treatment with EDTA, and the drug-depleted resins could be recharged with the same or a different class of anticandidal drugs. These results suggest clinical potential of the newly developed antifungal denture materials in the management of CADS and other infectious conditions.

A Spodoptera exigua Cadherin Serves as a Putative Receptor for Bacillus thuringiensis Cry1Ca Toxin and Shows Differential Enhancement of Cry1Ca and Cry1Ac Toxicity

PubMed Central

Ren, Xiang-Liang; Chen, Rui-Rui; Zhang, Ying; Ma, Yan; Cui, Jin-Jie; Han, Zhao-Jun; Mu, Li-Li

2013-01-01

Crystal toxin Cry1Ca from Bacillus thuringiensis has an insecticidal spectrum encompassing lepidopteran insects that are tolerant to current commercially used B. thuringiensis crops (Bt crops) expressing Cry1A toxins and may be useful as a potential bioinsecticide. The mode of action of Cry1A is fairly well understood. However, whether Cry1Ca interacts with the same receptor proteins as Cry1A remains unproven. In the present paper, we first cloned a cadherin-like gene, SeCad1b, from Spodoptera exigua (relatively susceptible to Cry1Ca). SeCad1b was highly expressed in the larval gut but scarcely detected in fat body, Malpighian tubules, and remaining carcass. Second, we bacterially expressed truncated cadherin rSeCad1bp and its interspecific homologue rHaBtRp from Helicoverpa armigera (more sensitive to Cry1Ac) containing the putative toxin-binding regions. Competitive binding assays showed that both Cry1Ca and Cry1Ac could bind to rSeCad1bp and rHaBtRp, and they did not compete with each other. Third, Cry1Ca ingestion killed larvae and decreased the weight of surviving larvae. Dietary introduction of SeCad1b double-stranded RNA (dsRNA) reduced approximately 80% of the target mRNA and partially alleviated the negative effect of Cry1Ca on larval survival and growth. Lastly, rSeCad1bp and rHaBtRp differentially enhanced the negative effects of Cry1Ca and Cry1Ac on the larval mortalities and growth of S. exigua and H. armigera. Thus, we provide the first lines of evidence to suggest that SeCad1b from S. exigua is a functional receptor of Cry1Ca. PMID:23835184

Manipulation of Guaiacyl and Syringyl Monomer Biosynthesis in an Arabidopsis Cinnamyl Alcohol Dehydrogenase Mutant Results in Atypical Lignin Biosynthesis and Modified Cell Wall Structure.

PubMed

Anderson, Nickolas A; Tobimatsu, Yuki; Ciesielski, Peter N; Ximenes, Eduardo; Ralph, John; Donohoe, Bryon S; Ladisch, Michael; Chapple, Clint

2015-08-01

Modifying lignin composition and structure is a key strategy to increase plant cell wall digestibility for biofuel production. Disruption of the genes encoding both cinnamyl alcohol dehydrogenases (CADs), including CADC and CADD, in Arabidopsis thaliana results in the atypical incorporation of hydroxycinnamaldehydes into lignin. Another strategy to change lignin composition is downregulation or overexpression of ferulate 5-hydroxylase (F5H), which results in lignins enriched in guaiacyl or syringyl units, respectively. Here, we combined these approaches to generate plants enriched in coniferaldehyde-derived lignin units or lignins derived primarily from sinapaldehyde. The cadc cadd and ferulic acid hydroxylase1 (fah1) cadc cadd plants are similar in growth to wild-type plants even though their lignin compositions are drastically altered. In contrast, disruption of CAD in the F5H-overexpressing background results in dwarfism. The dwarfed phenotype observed in these plants does not appear to be related to collapsed xylem, a hallmark of many other lignin-deficient dwarf mutants. cadc cadd, fah1 cadc cadd, and cadd F5H-overexpressing plants have increased enzyme-catalyzed cell wall digestibility. Given that these CAD-deficient plants have similar total lignin contents and only differ in the amounts of hydroxycinnamaldehyde monomer incorporation, these results suggest that hydroxycinnamaldehyde content is a more important determinant of digestibility than lignin content. © 2015 American Society of Plant Biologists. All rights reserved.

Development of a large scale Chimera grid system for the Space Shuttle Launch Vehicle

NASA Technical Reports Server (NTRS)

Pearce, Daniel G.; Stanley, Scott A.; Martin, Fred W., Jr.; Gomez, Ray J.; Le Beau, Gerald J.; Buning, Pieter G.; Chan, William M.; Chiu, Ing-Tsau; Wulf, Armin; Akdag, Vedat

1993-01-01

The application of CFD techniques to large problems has dictated the need for large team efforts. This paper offers an opportunity to examine the motivations, goals, needs, problems, as well as the methods, tools, and constraints that defined NASA's development of a 111 grid/16 million point grid system model for the Space Shuttle Launch Vehicle. The Chimera approach used for domain decomposition encouraged separation of the complex geometry into several major components each of which was modeled by an autonomous team. ICEM-CFD, a CAD based grid generation package, simplified the geometry and grid topology definition by provoding mature CAD tools and patch independent meshing. The resulting grid system has, on average, a four inch resolution along the surface.

Differential expression of SofDIR16 and SofCAD genes in smut resistant and susceptible sugarcane cultivars in response to Sporisorium scitamineum.

PubMed

Sánchez-Elordi, Elena; Contreras, Roberto; de Armas, Roberto; Benito, Mario C; Alarcón, Borja; de Oliveira, Eliandre; Del Mazo, Carlos; Díaz-Peña, Eva M; Santiago, Rocío; Vicente, Carlos; Legaz, María E

2018-05-04

Proteomic profiling of the stalk of a smut resistant and a susceptible sugarcane cultivars revealed the presence of dirigent and dirigent-like proteins in abundance in the pool of high molecular mass (HMMG) and mid-molecular mass (MMMG) glycoproteins, produced as part of the defensive response to the fungal smut pathogen. Quantitative RT-PCR analysis showed that expression levels of SofDIR16 (sugarcane dirigent16) and SofCAD (sugarcane cinnamyl alcohol dehydrogenase) were higher in the smut resistant My 55-14 cultivar than in the sensitive B 42231 cultivar prior to infection. Inoculation with fungal sporidia or water decreased the level of SofCAD transcripts in My 55-14, indicating that regulation of SofCAD expression does not take part of the specific response to smut infection. In contrast, SofDIR16 expression was almost nullified in My 55-14 after inoculation with fungal sporidia, but not after water injection. It is proposed that the decreased expression of dirigent proteins induces the formation of lignans, which are involved in the defense response of the smut resistant My 55-14 cultivar. Published by Elsevier GmbH.

Effect of surface treatments on the bond strength of CAD/CAM fiberglass posts.

PubMed

Garcia, Paula-Pontes; da Costa, Rogério-Goulart; Garcia, André-Vivan; Gonzaga, Carla-Castiglia; da Cunha, Leonardo-Fernandes; Rezende, Carlos-Eduardo-Edwards; Correr, Gisele-Maria

2018-06-01

There is no ideal protocol for the surface treatment of fiber posts, especially when using a computer-aided design/computer-aided manufacturing (CAD/CAM) experimental fiberglass block. The purpose of this study was to evaluate the bond strength of a CAD/CAM customized glass fiber post and core after applying different surface treatment techniques. Forty premolars were prepared to receive a customized CAD/CAM glass-fiber post and core obtained from an experimental block of glass fiber and epoxy resin. The specimens were randomly distributed in 4 groups (n=10) according to the post and core surface treatment: ETH - 70% ethanol; HP - 24% hydrogen peroxide for 1 minute; ETH/S - 70% ethanol + silane; HP/S - 24% hydrogen peroxide + silane. The universal adhesive containing silane was applied on the posts and prepared post spaces in all groups. The posts were cemented using dual cure resin cement. The specimens were stored in distilled water at 37°C for 24 h, cut (two slices of 1 mm for each root third - coronal, middle, and apical) and subjected to push-out test (0.5 mm/min). Data was subjected to two-way ANOVA (surface treatment and root third) and Tukey's test (α=0,05). There was no significant difference of bond strength values among groups, regardless the surface treatment ( p >0.05). There was significant difference on bond strength values for the different root thirds ( p <0.05) (coronal>middle=apical). The different surface treatment and application of additional silane in the CAD/CAM customized glass-fiber post and core does not interfere on bond strength values. The root dentin third interfered on the bond strength, with higher values for the coronal third. Key words: Post and core technique, cad/cam, shear strength, hydrogen peroxide.

Optimizing treatment of hypothyroidism.

PubMed

Clarke, Nick; Kabadi, Udaya M

2004-01-01

Several thyroid hormone preparations are currently available, including levothyroxine sodium (thyroxine), liothyronine (triiodothyronine), and desiccated thyroid extract, as well as a combination of levothyroxine sodium and liothyronine. Levothyroxine sodium monotherapy at an appropriate daily dose provides uniform levels of both thyroxine and triiodothyronine in the circulation without diurnal variation. Therefore, it is the preparation of choice in most patients with hypothyroidism of both the primary and central types. A normal thyrotropin (TSH) level of 1-2 mU/L is considered the determinant of optimal daily levothyroxine sodium dose in patients with primary hypothyroidism, whereas normal thyroxine and triiodothyronine levels in the mid or upper normal range may denote optimal replacement in patients with central hypothyroidism. Optimal daily levothyroxine sodium dose may be determined according to serum TSH level at the time of diagnosis of primary hypothyroidism. Initial administration of close to the full calculated dose of levothyroxine sodium is appropriate for younger patients, reducing the need for follow-up visits and repeated laboratory testing for dose titration. In the elderly and in patients with a history of coronary artery disease (CAD), the well established approach of starting with a low dose and gradually titrating to the full calculated dose is always the best option. Levothyroxine sodium can and should be continued in patients receiving treatment for CAD. Even minor over-replacement during initial titration of levothyroxine sodium should be avoided, because of the risk of cardiac events. Chronic over-replacement may induce osteoporosis, particularly in postmenopausal women, and should also be avoided.

Heart rate and use of beta-blockers in stable outpatients with coronary artery disease.

PubMed

Steg, Ph Gabriel; Ferrari, Roberto; Ford, Ian; Greenlaw, Nicola; Tardif, Jean-Claude; Tendera, Michal; Abergel, Hélène; Fox, Kim M

2012-01-01

Heart rate (HR) is an emerging risk factor in coronary artery disease (CAD). However, there is little contemporary data regarding HR and the use of HR-lowering medications, particularly beta-blockers, among patients with stable CAD in routine clinical practice. The goal of the present analysis was to describe HR in such patients, overall and in relation to beta-blocker use, and to describe the determinants of HR. CLARIFY is an international, prospective, observational, longitudinal registry of outpatients with stable CAD, defined as prior myocardial infarction or revascularization procedure, evidence of coronary stenosis of >50%, or chest pain associated with proven myocardial ischemia. A total of 33,438 patients from 45 countries in Europe, the Americas, Africa, Middle East, and Asia/Pacific were enrolled between November 2009 and July 2010. Most of the 33,177 patients included in this analysis were men (77.5%). Mean (SD) age was 64.2 (10.5) years, HR by pulse was 68.3 (10.6) bpm, and by electrocardiogram was 67.2 (11.4) bpm. Overall, 44.0% had HR ≥ 70 bpm. Beta-blockers were used in 75.1% of patients and another 14.4% had intolerance or contraindications to beta-blocker therapy. Among 24,910 patients on beta-blockers, 41.1% had HR ≥ 70 bpm. HR ≥ 70 bpm was independently associated with higher prevalence and severity of angina, more frequent evidence of myocardial ischemia, and lack of use of HR-lowering agents. Despite a high rate of use of beta-blockers, stable CAD patients often have resting HR ≥ 70 bpm, which was associated with an overall worse health status, more frequent angina and ischemia. Further HR lowering is possible in many patients with CAD. Whether it will improve symptoms and outcomes is being tested.

Age determination of vessel wall hematoma in spontaneous cervical artery dissection: A multi-sequence 3T Cardiovascular Magnetic resonance study

PubMed Central

2011-01-01

Background Previously proposed classifications for carotid plaque and cerebral parenchymal hemorrhages are used to estimate the age of hematoma according to its signal intensities on T1w and T2w MR images. Using these classifications, we systematically investigated the value of cardiovascular magnetic resonance (CMR) in determining the age of vessel wall hematoma (VWH) in patients with spontaneous cervical artery dissection (sCAD). Methods 35 consecutive patients (mean age 43.6 ± 9.8 years) with sCAD received a cervical multi-sequence 3T CMR with fat-saturated black-blood T1w-, T2w- and TOF images. Age of sCAD was defined as time between onset of symptoms (stroke, TIA or Horner's syndrome) and the CMR scan. VWH were categorized into hyperacute, acute, early subacute, late subacute and chronic based on their signal intensities on T1w- and T2w images. Results The mean age of sCAD was 2.0, 5.8, 15.7 and 58.7 days in patients with acute, early subacute, late subacute and chronic VWH as classified by CMR (p < 0.001 for trend). Agreement was moderate between VWH types in our study and the previously proposed time scheme of signal evolution for cerebral hemorrhage, Cohen's kappa 0.43 (p < 0.001). There was a strong agreement of CMR VWH classification compared to the time scheme which was proposed for carotid intraplaque hematomas with Cohen's kappa of 0.74 (p < 0.001). Conclusions Signal intensities of VWH in sCAD vary over time and multi-sequence CMR can help to determine the age of an arterial dissection. Furthermore, findings of this study suggest that the time course of carotid hematomas differs from that of cerebral hematomas. PMID:22122756

Diminished Global Arginine Bioavailability and Increased Arginine Catabolism as Metabolic Profile of Increased Cardiovascular Risk

PubMed Central

Tang, W. H. Wilson; Wang, Zeneng; Cho, Leslie; Brennan, Danielle M.; Hazen, Stanley L.

2009-01-01

Objective We hypothesized that an integrated assessment of arginine with its catabolic products may better predict cardiovascular risks than arginine levels alone. Background Arginine is the sole nitrogen source for nitric oxide (NO) synthesis. The major catabolic products of arginine are ornithine and citrulline. Methods Plasma levels of free arginine, ornithine, citrulline and the endogenous NO synthase inhibitor asymmetric dimethylarginine (ADMA) were measured using LC/MS/MS. We examined the relationship of global arginine bioavailability ratio (GABR, defined as arginine/[ornithine+citrulline]) vs. arginine and its catabolic metabolites to prevalence of coronary artery disease (CAD) and incidence of major adverse cardiovascular events (MACE = death, myocardial infarction, stroke) over a 3-year follow-up in 1,010 subjects undergoing elective cardiac catheterization. Results Patients with CAD had significantly lower GABR [median(IQR); 1.06(0.75, 1.31) versus 1.27(0.96, 1.73), p<0.001] and arginine levels [mean: 68 ±20 μM versus 74 ±24 μM, p<0.001) than those without CAD. After adjusting for Framingham risk score, C-reactive protein, and renal function, lower GABR (but not arginine levels) and higher citrulline levels remained significantly associated with both prevalence of CAD [adjusted odds-ratio (OR) 3.93, p<0.001 and 5.98, p<0.001, respectively] and 3-year risk for incidence of MACE [adjusted Hazard ratio (HR) 1.98, p=0.025 and 2.40, p=0.01, respectively], and remained significant after adjusting for ADMA. Conclusions GABR may serve as a more comprehensive concept of reduced NO synthetic capacity compared to systemic arginine levels. Diminished GABR and high citrulline levels are associated with both development of atherosclerotic CAD and heightened long-term risk for major adverse cardiac events. PMID:19477356

No psychological distress in sportsmen aged 45 years and older after cardiovascular screening, including cardiac CT: The Measuring Athlete's Risk of Cardiovascular events (MARC) study.

PubMed

Schurink, M M; Braber, T L; Prakken, N H J; Doevendans, P A F M; Backx, F J G; Grobbee, D E; Rienks, R; Nathoe, H M; Bots, M L; Velthuis, B K; Mosterd, A

2017-04-01

Psychological distress caused by cardiovascular pre-participation screening (PPS) may be a reason not to implement a PPS program. We assessed the psychological impact of PPS, including cardiac computed tomography (CT), in 318 asymptomatic sportsmen aged ≥45 years. Coronary artery disease (CAD) was defined as a coronary artery calcium score ≥100 Agatson units and/or ≥50% luminal stenosis on contrast-enhanced cardiac CT. Psychological impact was measured with the Impact of Event Scale (IES) (seven items) on a six-point scale (grade 0-5). A sum score ≥19 indicates clinically relevant psychological distress. A Likert scale was used to assess overall experiences and impact on sports and lifestyle. A total of 275 participants (86.5% response rate, 95% CI 83-90%) with a mean age of 54.5 ± 6.4 years completed the questionnaires, 48 (17.5%, 95% CI 13-22%) of whom had CAD. The median IES score was 1 (IQR 0-2, [0-23]). IES was slightly higher in those with CAD (mean rank 175 vs. 130, p < 0.001). One participant (with CAD) experienced clinically relevant psychological distress (IES = 23). Participants reported numerous benefits, including feeling safer exercising (58.6%, 95% CI 53-65%) and positive lifestyle changes, especially in those with CAD (17.2 vs. 52.1%, p < 0.001). The majority were satisfied with their participation (93.8%, 95% CI 91-97%). Cardiovascular PPS, including cardiac CT, causes no relevant psychological distress in older sportsmen. Psychological distress should not be a reason to forego screening in sportsmen.

High-Risk Carotid Plaques Identified by CT-Angiogram can Predict Acute Myocardial Infarction

PubMed Central

Mosleh, Wassim; Adib, Keenan; Natdanai, Punnanithinont; Carmona-Rubio, Andres; Karki, Roshan; Paily, Jacienta; Ahmed, Mohamed Abdel-Aal; Vakkalanka, Sujit; Madam, Narasa; Gudleski, Gregory D; Chung, Charles; Sharma, Umesh C

2016-01-01

Purpose Prior studies identified the incremental value of non-invasive imaging by CT-angiogram (CTA) to detect high-risk coronary atherosclerotic plaques. Due to their superficial locations, larger calibers and motion-free imaging, the carotid arteries provide the best anatomic access for the non-invasive characterization of atherosclerotic plaques. We aim to assess the ability of predicting obstructive coronary artery disease (CAD) or acute myocardial infarction (MI) based on high-risk carotid plaque features identified by CTA. Methods We retrospectively examined carotid CTAs of 492 patients that presented with acute stroke to characterize the atherosclerotic plaques of the carotid arteries and examined development of acute MI and obstructive CAD within 12-months. Carotid lesions were defined in terms of calcifications (large or speckled), presence of low-attenuation plaques, positive remodeling, and presence of napkin ring sign (NRS). Adjusted relative risks were calculated for each plaque features. Results Patients with speckled (<3mm) calcifications and/or larger calcifications on CTA had a higher risk of developing an MI and/or obstructive CAD within one year compared to patients without [adjusted RR of 7.51, 95%CI 1.26 to 73.42, P= 0.001]. Patients with low-attenuation plaques on CTA had a higher risk of developing an MI and/or obstructive CAD within one year than patients without [adjusted RR of 2.73, 95%CI 1.19 to 8.50, P= 0.021]. Presence of carotid calcifications and low-attenuation plaques also portended higher sensitivity (100% and 79.17%, respectively) for the development of acute MI. Conclusions Presence of carotid calcifications and low-attenuation plaques can predict the risk of developing acute MI and/or obstructive CAD within 12-months. Given their high sensitivity, their absence can reliably exclude 12-month events. PMID:27866279

High-risk carotid plaques identified by CT-angiogram can predict acute myocardial infarction.

PubMed

Mosleh, Wassim; Adib, Keenan; Natdanai, Punnanithinont; Carmona-Rubio, Andres; Karki, Roshan; Paily, Jacienta; Ahmed, Mohamed Abdel-Aal; Vakkalanka, Sujit; Madam, Narasa; Gudleski, Gregory D; Chung, Charles; Sharma, Umesh C

2017-04-01

Prior studies identified the incremental value of non-invasive imaging by CT-angiogram (CTA) to detect high-risk coronary atherosclerotic plaques. Due to their superficial locations, larger calibers and motion-free imaging, the carotid arteries provide the best anatomic access for the non-invasive characterization of atherosclerotic plaques. We aim to assess the ability of predicting obstructive coronary artery disease (CAD) or acute myocardial infarction (MI) based on high-risk carotid plaque features identified by CTA. We retrospectively examined carotid CTAs of 492 patients that presented with acute stroke to characterize the atherosclerotic plaques of the carotid arteries and examined development of acute MI and obstructive CAD within 12-months. Carotid lesions were defined in terms of calcifications (large or speckled), presence of low-attenuation plaques, positive remodeling, and presence of napkin ring sign. Adjusted relative risks were calculated for each plaque features. Patients with speckled (<3 mm) calcifications and/or larger calcifications on CTA had a higher risk of developing an MI and/or obstructive CAD within 1 year compared to patients without (adjusted RR of 7.51, 95%CI 1.26-73.42, P = 0.001). Patients with low-attenuation plaques on CTA had a higher risk of developing an MI and/or obstructive CAD within 1 year than patients without (adjusted RR of 2.73, 95%CI 1.19-8.50, P = 0.021). Presence of carotid calcifications and low-attenuation plaques also portended higher sensitivity (100 and 79.17%, respectively) for the development of acute MI. Presence of carotid calcifications and low-attenuation plaques can predict the risk of developing acute MI and/or obstructive CAD within 12-months. Given their high sensitivity, their absence can reliably exclude 12-month events.

Effect of Clinically Relevant CAD/CAM Zirconia Polishing on Gingival Fibroblast Proliferation and Focal Adhesions

PubMed Central

Fischer, Nicholas G.; Wong, Jeffrey; Cerutis, D. Roselyn

2017-01-01

Mucosal seal formation around dental abutments is critical to the successful integration of dental implants into the human oral cavity. No information exists for how clinically relevant polishing procedures for computer-aided design and computer-aided manufactured (CAD/CAM) zirconia abutments affects cellular responses important to mucosal seal formation. CAD/CAM zirconia was divided into four groups for clinically relevant polishing utilizing commercial polishing heads: control, coarse, coarse plus medium, and coarse plus medium plus fine. Surfaces were analyzed with scanning electron microscopy (SEM), atomic force microscopy (AFM), and optical profilometry (OP). Subsequently, human gingival fibroblasts (HGFs) were seeded onto the zirconia surfaces. Proliferation was measured via a quantitative SEM technique and focal adhesion kinase (FAK) phosphorylation status was measured by an enzyme-linked immunosorbent assay (ELISA). Results showed an increase in proliferation on all polished surfaces as compared to the control. Phosphorylation of FAK at tyrosine 397 (Y397) was up-modulated on the control surfaces. The associated cell adaptation is discussed. In all cases, FAK phosphorylation was greater at 24 h than 48 h. These results suggest that clinicians should be mindful of the effects of abutment polishing methodology, as this may have an impact on early mucosal seal formation. PMID:29186907

Comparison of cardiorespiratory responses during aquatic and land treadmill exercise in patients with coronary artery disease.

PubMed

Choi, Jun Hwan; Kim, Bo Ryun; Joo, Seung Jae; Han, Eun Young; Kim, Song Yi; Kim, Sun Mi; Lee, So Young; Yoon, Ho Min

2015-01-01

To investigate cardiorespiratory responses during exercise stress tests using an aquatic treadmill and a land-based treadmill in patients with coronary artery disease (CAD). Twenty-one stable CAD patients were enrolled. All patients participated in 2 symptom-limited incremental exercise tests, using both an aquatic and a land treadmill. For the aquatic treadmill protocol, patients were submerged to the upper waist in 28°C water. The treadmill speed started at 2.0 km/h and increased 0.5 km/h every minute thereafter. For the land treadmill protocol, the speed and gradient were started at 2.4 km/h and 1.5%, respectively. The speed was increased by 0.3 km/h and grade by 1% every minute thereafter. Oxygen consumption ((Equation is included in full-text article.)O2), heart rate (HR), and respiratory exchange ratio were measured continuously and peak values recorded. Rating of perceived exertion, percentage of age-predicted maximal HR, and total exercise duration were also recorded. Peak cardiorespiratory responses during both protocols were compared. The peak (Equation is included in full-text article.)O2 and peak HR did not show any significant differences. The peak respiratory exchange ratio was significantly greater using the land treadmill than the aquatic treadmill protocol. Rating of perceived exertion, age-predicted maximal HR percentage, and total exercise duration were similar for both protocols. There was a significant linear relationship between HR and (Equation is included in full-text article.)O2 with both protocols. This study demonstrated that aquatic treadmill exercise elicits similar peak cardiorespiratory responses compared with land treadmill exercise, suggesting that aquatic treadmill exercise may be effective for CAD patients in cardiac rehabilitation.

Does artificial aging affect mechanical properties of CAD/CAM composite materials.

PubMed

Egilmez, Ferhan; Ergun, Gulfem; Cekic-Nagas, Isil; Vallittu, Pekka K; Lassila, Lippo V J

2018-01-01

The purpose of this study was to determine the flexural strength and Weibull characteristics of different CAD/CAM materials after different in vitro aging conditions. The specimens were randomly assigned to one of the six in vitro aging conditions: (1) water storage (37°C, 3 weeks), (2) boiling water (24h), (3) hydrochloric acid exposure (pH: 1.2, 24h), (4) autoclave treatment (134°C, 200kPa, 12h), (5) thermal cycling (5000 times, 5-55°C), (6) cyclic loading (100N, 50,000 cycles). No treatment was applied to the specimens in control group. Three-point bending test was used for the calculation of flexural strength. The reliability of the strength was assessed by Weibull distribution. Surface roughness and topography was examined by coherence scanning interferometry. Evaluated parameters were compared using the Kruskall-Wallis or Mann-Whitney U test. Water storage, autoclave treatment and thermal cycling significantly decreased the flexural strength of all materials (p<0.05), whereas HCl exposure or cyclic loading did not affect the properties (p>0.05). Weibull moduli of Cerasmart™ and Lava™ Ultimate were similar with control. Vita Enamic ® exhibited similar Weibull moduli in all aging groups except the HCl treated group (p>0.05). R a values of Cerasmart™ and Lava™ Ultimate were in the range of 0.053-0.088μm in the aged groups. However R a results of Vita Enamic ® were larger than 0.2μm. Flexural strength of newly developed restorative CAD/CAM materials was significantly decreased by artificial aging. Cyclic loading or HCl exposure does not affect to the flexural strength and structural reliability of Cerasmart™ and Lava™ Ultimate. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

The Competitive Influence of Li+, Na+, K+, Ag+, and H+ on the Fragmentation of a PEGylated Polymeric Excipient

NASA Astrophysics Data System (ADS)

Wei, Juan; Bristow, Anthony W. T.; O'Connor, Peter B.

2015-01-01

The collisionally activated dissociation (CAD) and electron capture dissociation (ECD) of doubly charged tocopheryl polyethylene glycol succinate (TPGS) have been examined. Li+, Na+, K+, Ag+, and H+ were selected in the study, and the competitive influence of each ion was investigated by fragmenting TPGS attached with two different cations, [M + X1 + X2]2+ (X1 and X2 refer to Li+, Na+, K+, Ag+, H+). For metallic adducts, CAD results show that the dissociation of ionic adducts from the precursor is most likely depending on the binding strength, where the affinity of each ion to the TPGS is in the order of Ag+ ≈ Li+ ˃ Na+ ˃ K+. Introducing more strongly bound adducts increases fragmentation. During ECD, however, the silver cation is lost most easily compared with the other alkali metal ions, but silver also shows a dominant role in producing fragmentations. Moreover, the charge carriers are lost in an order (Ag+ ˃ Na+ ˃ K+ ≥ Li+ where the loss of Ag is most easily) that appears to correlate with the standard reduction potential of the metallic ions (Ag+ ˃ Na+ ˃ K+ ˃ Li+). The ECD results suggest that the reduction potential of the charge carrier could be an important factor influencing the fragmentation, where the ion with a high reduction potential is more effective in capturing electrons, but may also be lost easily before leading to any fragmentation. Finally, a proton has the weakest binding with the TPGS according to the CAD results, and its dissociation in ECD follows the order of the reduction potential (Ag+ ˃ H+ ˃ Na+ ˃ K+ > Li+).

Web-Based System for Adaptable Rubrics: Case Study on CAD Assessment

ERIC Educational Resources Information Center

Company, Pedro; Contero, Manuel; Otey, Jeffrey; Camba, Jorge D.; Agost, María-Jesús; Pérez-López, David

2017-01-01

This paper describes the implementation and testing of our concept of adaptable rubrics, defined as analytical rubrics that arrange assessment criteria at multiple levels that can be expanded on demand. Because of its adaptable nature, these rubrics cannot be implemented in paper formats, neither are they supported by current Learning Management…

Marital Discord and Coronary Artery Disease: A Comparison of Behaviorally Defined Discrete Groups

ERIC Educational Resources Information Center

Smith, Timothy W.; Uchino, Bert N.; Berg, Cynthia A.; Florsheim, Paul

2012-01-01

Objective: Marital difficulties can confer risk of coronary heart disease, as in a study of outwardly healthy couples (T. W. Smith et al., 2011) where behavioral ratings of low affiliation and high control during marital disagreements were associated with asymptomatic coronary artery disease (CAD). However, taxometric studies suggest that marital…

Molecular cloning and functional analysis of nine cinnamyl alcohol dehydrogenase family members in Populus tomentosa.

PubMed

Chao, Nan; Liu, Shu-Xin; Liu, Bing-Mei; Li, Ning; Jiang, Xiang-Ning; Gai, Ying

2014-11-01

Nine CAD/CAD-like genes in P. tomentosa were classified into four classes based on expression patterns, phylogenetic analysis and biochemical properties with modification for the previous claim of SAD. Cinnamyl alcohol dehydrogenase (CAD) functions in monolignol biosynthesis and plays a critical role in wood development and defense. In this study, we isolated and cloned nine CAD/CAD-like genes in the Populus tomentosa genome. We investigated differential expression using microarray chips and found that PtoCAD1 was highly expressed in bud, root and vascular tissues (xylem and phloem) with the greatest expression in the root. Differential expression in tissues was demonstrated for PtoCAD3, PtoCAD6 and PtoCAD9. Biochemical analysis of purified PtoCADs in vitro indicated PtoCAD1, PtoCAD2 and PtoCAD8 had detectable activity against both coniferaldehyde and sinapaldehyde. PtoCAD1 used both substrates with high efficiency. PtoCAD2 showed no specific requirement for sinapaldehyde in spite of its high identity with so-called PtrSAD (sinapyl alcohol dehydrogenase). In addition, the enzymatic activity of PtoCAD1 and PtoCAD2 was affected by temperature. We classified these nine CAD/CAD-like genes into four classes: class I included PtoCAD1, which was a bone fide CAD with the highest activity; class II included PtoCAD2, -5, -7, -8, which might function in monolignol biosynthesis and defense; class III genes included PtoCAD3, -6, -9, which have a distinct expression pattern; class IV included PtoCAD12, which has a distinct structure. These data suggest divergence of the PtoCADs and its homologs, related to their functions. We propose genes in class II are a subset of CAD genes that evolved before angiosperms appeared. These results suggest CAD/CAD-like genes in classes I and II play a role in monolignol biosynthesis and contribute to our knowledge of lignin biosynthesis in P. tomentosa.

Grammar-based Automatic 3D Model Reconstruction from Terrestrial Laser Scanning Data

NASA Astrophysics Data System (ADS)

Yu, Q.; Helmholz, P.; Belton, D.; West, G.

2014-04-01

The automatic reconstruction of 3D buildings has been an important research topic during the last years. In this paper, a novel method is proposed to automatically reconstruct the 3D building models from segmented data based on pre-defined formal grammar and rules. Such segmented data can be extracted e.g. from terrestrial or mobile laser scanning devices. Two steps are considered in detail. The first step is to transform the segmented data into 3D shapes, for instance using the DXF (Drawing Exchange Format) format which is a CAD data file format used for data interchange between AutoCAD and other program. Second, we develop a formal grammar to describe the building model structure and integrate the pre-defined grammars into the reconstruction process. Depending on the different segmented data, the selected grammar and rules are applied to drive the reconstruction process in an automatic manner. Compared with other existing approaches, our proposed method allows the model reconstruction directly from 3D shapes and takes the whole building into account.

Thrombolysis in myocardial infarction frame count in coronary arteries without visible atherosclerosis in coronary angiography of patients with stable coronary artery disease.

PubMed

Tacoy, Gulten A; Yazici, Guliz E; Kocaman, Sinan A; Ozdemir, Murat H

2009-06-01

To investigate the thrombolysis in myocardial infarction (TIMI) frame count (TFC) in the coronary arteries without visible atherosclerosis in coronary angiography of patients with stable coronary artery disease (CAD). Eighty-three patients (mean age 58+/-10, 31 [37%] males), who underwent coronary angiographic evaluation for stable angina in Gazi University, Ankara, Turkey, Cardiology clinic between 2006-2007 were enrolled. Forty patients with normal coronary arteries were defined as group I. Group II consisted of 43 patients, who have one normal coronary artery in the setting of stable CAD defined as stenoses 50% or greater in at least one major coronary artery. Coronary blood flow and microvascular perfusion was evaluated by TFC. In group II, the TFC of left anterior descending artery (LAD) in 15 patients, TFC of circumflex artery (CX) in 18 patient, and TFC of right coronary artery (RCA) in 10 patients were evaluated. In group II, the TFC of LAD (37+/-12 versus 29+/-12, p=0.015) and CX (22+/-8 versus 18+/-9, p=0.035) were significantly higher than those in group I. The TFC of RCA was similar between groups (17+/-9 versus 17+/-8, p=0.990). After the adjustment of the risk factors by multivariate regression analyses, the association between TFC and clinical characteristic was statistically non-significant. The TFC decreased in angiographically normal LAD and CX arteries in the setting of stable angina pectoris. The important predictor was CAD alone, irrespective of the clinical parameters.

Rechargeable Infection-responsive Antifungal Denture Materials

PubMed Central

Cao, Z.; Sun, X.; Yeh, C.-K.; Sun, Y.

2010-01-01

Candida-associated denture stomatitis (CADS) is a significant clinical concern. We developed rechargeable infection-responsive antifungal denture materials for potentially managing the disease. Polymethacrylic acid (PMAA) was covalently bound onto diurethane dimethacrylate denture resins in the curing step. The PMAA resins bound cationic antifungal drugs such as miconazole and chlorhexidine digluconate (CG) through ionic interactions. The anticandidal activities of the drug-containing PMAA-resin discs were sustained for a prolonged period of time (weeks and months). Drug release was much faster at acidic conditions (pH 5) than at pH 7. Drugs bound to the denture materials could be “washed out” by treatment with EDTA, and the drug-depleted resins could be recharged with the same or a different class of anticandidal drugs. These results suggest clinical potential of the newly developed antifungal denture materials in the management of CADS and other infectious conditions. PMID:20940361

RAGE gene polymorphisms are associated with circulating levels of endogenous secretory RAGE but not with coronary artery disease in Chinese patients with type 2 diabetes mellitus.

PubMed

Peng, Wen Hui; Lu, Lin; Wang, Ling Jie; Yan, Xiao Xiang; Chen, Qiu Jing; Zhang, Qi; Zhang, Rui Yan; Shen, Wei Feng

2009-07-01

Engagement of the receptor for advanced glycation end products (RAGE) with advanced glycation end products and subsequent signaling play an important role in the development of diabetic complications. This pathophysiological effect was mitigated partially by endogenous secretory RAGE (esRAGE). The present study aimed to explore the possible association of RAGE polymorphism with serum esRAGE level and coronary artery disease (CAD) in Chinese patients with type 2 diabetes mellitus (T2DM). A total of 740 consecutive patients with T2DM undergoing coronary angiography were enrolled. The severity of coronary atherosclerosis was defined as the number of diseased vessels; 69 bp insertion/deletion was determined by polymerase chain reactions, and -429 T/C, -374A/T and G82S variants were assessed by polymerase chain reaction-restriction fragment length polymorphism. Patients with genotypes carrying C allele of -429 T/C and G allele of G82S had significantly higher esRAGE levels. 82S allele was also associated with increased tumor necrosis factor-alpha and interleukin-6 levels in diabetic patients with CAD (all p <0.05), but none of the polymorphisms or haplotypes was related to the presence and severity of CAD. G82S and -429 T/C polymorphisms of RAGE were associated with the circulating levels of esRAGE but not with CAD in Chinese patients with T2DM.

Heart failure hospitalization in women with signs and symptoms of ischemia: A report from the women's ischemia syndrome evaluation study.

PubMed

Bakir, May; Nelson, Michael D; Jones, Erika; Li, Quanlin; Wei, Janet; Sharif, Behzad; Minissian, Margo; Shufelt, Chrisandra; Sopko, George; Pepine, Carl J; Merz, C Noel Bairey

2016-11-15

Women with signs and symptoms of ischemia, no obstructive coronary artery disease, and preserved left ventricular ejection fraction enrolled in the National Heart Lung and Blood Institute (NHLBI) sponsored Women's Ischemia Syndrome Evaluation (WISE) study have an unexpectedly high rate of subsequent heart failure (HF) hospitalization. We sought to verify and characterize the HF hospitalizations. A retrospective chart review was performed on 223 women with signs and symptoms of ischemia, undergoing coronary angiography for suspected coronary artery disease followed for 6±2.6years. Data were collected from a single site in the WISE study. At the time of study enrollment, the women were 57±11years of age, all had preserved left ventricular ejection fraction, and 81 (36%) had obstructive CAD (defined as >50% stenosis in at least one epicardial artery). Among the 223 patients, 25 (11%) reported HF hospitalizations, of which 14/25 (56%) had recurrent HF hospitalizations (>2 hospitalizations). Medical records were available in 13/25 (52%) women. Left ventricular ejection fraction was measured in all verified cases and was found to be preserved in 12/13 (92%). HF hospitalization was not related to obstructive CAD. Among women with signs and symptoms of ischemia undergoing coronary angiography for suspected obstructive CAD, HF hospitalization at 6-year follow-up was predominantly characterized by a preserved ejection fraction and not associated with obstructive CAD. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Precursor ion scan driven fast untargeted screening and semi-determination of caffeoylquinic acid derivatives in Cynara scolymus L.

PubMed

Shen, Qing; Lu, Yanbin; Dai, Zhiyuan; Cheung, Hon-Yeung

2015-01-01

A precursor ion scan (PIS) technique based strategy was developed for rapid screening and semi-determination of caffeoylquinic acid derivatives (CADs) in artichoke (Cynara scolymus L.) using ultra-performance liquid chromatography (UPLC) coupled with tandem mass spectrometry. 1,5-Dicaffeoylquinic acid and 5-caffeoylquinic acid were used for studying the fragmentation behaviour of two classes of CADs, setting m/z 191 as a diagnostic moiety. When it was applied to artichoke sample, ten CADs were detected and elucidated in a single PIS run. Furthermore, method validation was implemented including: specificity (no interference), linearity (≥0.9993), limit of detection (LOD<0.12 ng mL(-1)) and limit of quantification (LOQ<0.25 ng mL(-1)), precision (RSD≤3.6), recovery (91.4-95.9%) and stability (at least 12 h). This approach was proven to be a powerful, selective and sensitive tool for rapid screening and semi-determination of untargeted components in natural products. Copyright © 2014 Elsevier Ltd. All rights reserved.

Transcription of thymic stromal lymphopoietin via Toll-like receptor 2 in canine keratinocytes: a possible association of Staphylococcus spp. in the deterioration of allergic inflammation in canine atopic dermatitis.

PubMed

Sakamoto, Mayu; Asahina, Ryota; Kamishina, Hiroaki; Maeda, Sadatoshi

2016-06-01

Colonization, overgrowth and subsequent infection by Staphylococcus spp. is frequently observed in canine atopic dermatitis (CAD), where it contributes to the intensity of cutaneous inflammation. The mechanisms by which staphylococci contribute to the pathogenesis of CAD are unclear. Studies suggest that thymic stromal lymphopoietin (TSLP), a cytokine induced by a cell wall component of Staphylococcus spp., may play a critical role in Th2 responses including the pathogenesis of CAD. To determine if synthetic triacylated lipopeptide (TLR1/2 ligand), a cell wall component of Staphylococcus spp., induces the transcription of TSLP via TLR2 in canine keratinocytes. Transcription of TSLP was quantified in a canine keratinocyte cell line after stimulation with synthetic triacylated lipopeptide, and again after inhibition of TLR2 by a targeted small interfering RNA. The transcription of TSLP was enhanced 6 h after stimulation with the synthetic triacylated lipopeptide; it was completely suppressed by knockdown of TLR2. The results demonstrated that a synthetic cell wall component of Staphylococcus spp. induced transcription of TSLP via TLR2 in canine keratinocytes. Additional studies will be required to investigate whether Staphylococcus spp. contributes to Th2 responses in CAD through TLR2-mediated TSLP production. © 2016 ESVD and ACVD.

Financial Impact of PEVAR Compared With Standard Endovascular Repair in Canadian Hospitals.

PubMed

Roche-Nagle, Graham; Hazel, Maureen; Rajan, Dheeraj K

2018-05-01

The percutaneous endovascular abdominal aortic repair (PEVAR) approach is a minimally invasive technique that has demonstrated clinical benefit over traditional surgical cut down associated with standard endovascular abdominal aortic aneurysm (AAA) repair (EVAR). The objective of our study was to evaluate the budget impact to a Canadian hospital of changing the technique for AAA repair from the EVAR approach to the PEVAR approach. We examined the budget impact of replacing the EVAR approach with the PEVAR approach in a Canadian hospital that performs 100 endovascular AAA repairs annually. The model incorporates the costs associated with surgery, length of stay, and postoperative complications occurring within 30 days. The use of PEVAR in AAA repair is associated with increased access device costs when compared with the EVAR approach (CAD$1000 vs CAD$400). However, AAA repair completed with the PEVAR approach demonstrates reduced operating time (101 minutes vs 133 minutes), length of stay (2.2 days vs 3.5 days), time in the recovery room (174 minutes vs 193 minutes), and postoperative complications (6% vs 30%), which offset the increased device costs. The model establishes that switching to the PEVAR approach in a Canadian hospital performing 100 AAA repairs annually would result in a potential cost avoidance of CAD$245,120. A change in AAA repair technique from EVAR to PEVAR can be a cost-effective solution for Canadian hospitals. Copyright © 2017 Canadian Association of Radiologists. Published by Elsevier Inc. All rights reserved.

Comparative Definitions for Moderate-Severe Ischemia in Stress Nuclear, Echocardiography, and Magnetic Resonance Imaging

PubMed Central

Shaw, Leslee J.; Berman, Daniel S.; Picard, Michael H.; Friedrich, Matthias G.; Kwong, Raymond Y.; Stone, Gregg W.; Senior, Roxy; Min, James K.; Hachamovitch, Rory; Scherrer-Crosbie, Marielle; Mieres, Jennifer H.; Marwick, Thomas H.; Phillips, Lawrence M.; Chaudhry, Farooq A.; Pellikka, Patricia A.; Slomka, Piotr; Arai, Andrew E.; Iskandrian, Ami E.; Bateman, Timothy M.; Heller, Gary V.; Miller, Todd D.; Nagel, Eike; Goyal, Abhinav; Borges-Neto, Salvador; Boden, William E.; Reynolds, Harmony R.; Hochman, Judith S.; Maron, David J.; Douglas, Pamela S.

2014-01-01

The lack of standardized reporting of the magnitude of ischemia on noninvasive imaging contributes to variability in translating the severity of ischemia across stress imaging modalities. We identified the risk of coronary artery disease (CAD) death or myocardial infarction (MI) associated with ≥10% ischemic myocardium on stress nuclear imaging as the risk threshold for stress echocardiography and cardiac magnetic resonance. A narrative review revealed that ≥10% ischemic myocardium on stress nuclear imaging was associated with a median rate of CAD death or MI of 4.9%/year (interquartile range: 3.75% to 5.3%). For stress echocardiography, ≥3 newly dysfunctional segments portend a median rate of CAD death or MI of 4.5%/year (interquartile range: 3.8% to 5.9%). Although imprecisely delineated, moderate-severe ischemia on cardiac magnetic resonance may be indicated by ≥4 of 32 stress perfusion defects or ≥3 dobutamine-induced dysfunctional segments. Risk-based thresholds can define equivalent amounts of ischemia across the stress imaging modalities, which will help to translate a common understanding of patient risk on which to guide subsequent management decisions. PMID:24925328

Machine learning techniques for breast cancer computer aided diagnosis using different image modalities: A systematic review.

PubMed

Yassin, Nisreen I R; Omran, Shaimaa; El Houby, Enas M F; Allam, Hemat

2018-03-01

The high incidence of breast cancer in women has increased significantly in the recent years. Physician experience of diagnosing and detecting breast cancer can be assisted by using some computerized features extraction and classification algorithms. This paper presents the conduction and results of a systematic review (SR) that aims to investigate the state of the art regarding the computer aided diagnosis/detection (CAD) systems for breast cancer. The SR was conducted using a comprehensive selection of scientific databases as reference sources, allowing access to diverse publications in the field. The scientific databases used are Springer Link (SL), Science Direct (SD), IEEE Xplore Digital Library, and PubMed. Inclusion and exclusion criteria were defined and applied to each retrieved work to select those of interest. From 320 studies retrieved, 154 studies were included. However, the scope of this research is limited to scientific and academic works and excludes commercial interests. This survey provides a general analysis of the current status of CAD systems according to the used image modalities and the machine learning based classifiers. Potential research studies have been discussed to create a more objective and efficient CAD systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Designers workbench: toward real-time immersive modeling

NASA Astrophysics Data System (ADS)

Kuester, Falko; Duchaineau, Mark A.; Hamann, Bernd; Joy, Kenneth I.; Ma, Kwan-Liu

2000-05-01

This paper introduces the Designers Workbench, a semi- immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing, and computer-aided engineering systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates form a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The Designers Workbench aims at closing this technology or 'digital gap' experienced by design and CAD engineers by transforming the classical design paradigm into its fully integrate digital and virtual analog allowing collaborative development in a semi- immersive virtual environment. This project emphasizes two key components form the classical product design cycle: freeform modeling and analysis. In the freedom modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.

Experiments to evolve toward a tangible user interface for computer-aided design parts assembly

NASA Astrophysics Data System (ADS)

Legardeur, Jeremy; Garreau, Ludovic; Couture, Nadine

2004-05-01

In this paper, we present the concepts of the ESKUA (Experimentation of a Kinesics System Usable for Assembly) platform that allows designers to carry out the assembly of mechanical CAD (Computer Aided Design) parts. This platform, based on tangible user interface lead taking into account assembly constraints from the beginning of the design phase and especially during the phase of CAD models manipulation. Our goal is to propose a working environment where the designer is confronted with real assembly constraints which are currently masked by existing CAD software functionalities. Thus, the platform is based on the handling of physical objects, called tangible interactors, which enable having a physical perception of the assembly constraints. In this goal, we have defined a typology of interactors based on concepts proposed in Design For Assembly methods. We present here the results of studies that led to the evolution of this first interactors set. One is concerning an experiment to evaluate the cognitive aspects of the use of interactors. The other is about an analysis of existing mechanical product and fasteners. We will show how these studies lead to the evolution of the interactors based on the functional surfaces use.

CONSOLE: A CAD tandem for optimization-based design interacting with user-supplied simulators

NASA Technical Reports Server (NTRS)

Fan, Michael K. H.; Wang, Li-Sheng; Koninckx, Jan; Tits, Andre L.

1989-01-01

CONSOLE employs a recently developed design methodology (International Journal of Control 43:1693-1721) which provides the designer with a congenial environment to express his problem as a multiple ojective constrained optimization problem and allows him to refine his characterization of optimality when a suboptimal design is approached. To this end, in CONSOLE, the designed formulates the design problem using a high-level language and performs design task and explores tradeoff through a few short and clearly defined commands. The range of problems that can be solved efficiently using a CAD tools depends very much on the ability of this tool to be interfaced with user-supplied simulators. For instance, when designing a control system one makes use of the characteristics of the plant, and therefore, a model of the plant under study has to be made available to the CAD tool. CONSOLE allows for an easy interfacing of almost any simulator the user has available. To date CONSOLE has already been used successfully in many applications, including the design of controllers for a flexible arm and for a robotic manipulator and the solution of a parameter selection problem for a neural network.

Image analysis software versus direct anthropometry for breast measurements.

PubMed

Quieregatto, Paulo Rogério; Hochman, Bernardo; Furtado, Fabianne; Machado, Aline Fernanda Perez; Sabino Neto, Miguel; Ferreira, Lydia Masako

2014-10-01

To compare breast measurements performed using the software packages ImageTool(r), AutoCAD(r) and Adobe Photoshop(r) with direct anthropometric measurements. Points were marked on the breasts and arms of 40 volunteer women aged between 18 and 60 years. When connecting the points, seven linear segments and one angular measurement on each half of the body, and one medial segment common to both body halves were defined. The volunteers were photographed in a standardized manner. Photogrammetric measurements were performed by three independent observers using the three software packages and compared to direct anthropometric measurements made with calipers and a protractor. Measurements obtained with AutoCAD(r) were the most reproducible and those made with ImageTool(r) were the most similar to direct anthropometry, while measurements with Adobe Photoshop(r) showed the largest differences. Except for angular measurements, significant differences were found between measurements of line segments made using the three software packages and those obtained by direct anthropometry. AutoCAD(r) provided the highest precision and intermediate accuracy; ImageTool(r) had the highest accuracy and lowest precision; and Adobe Photoshop(r) showed intermediate precision and the worst accuracy among the three software packages.

Rationale and design of the LURIC study--a resource for functional genomics, pharmacogenomics and long-term prognosis of cardiovascular disease.

PubMed

Winkelmann, B R; März, W; Boehm, B O; Zotz, R; Hager, J; Hellstern, P; Senges, J

2001-02-01

Coronary artery disease (CAD), arterial hypertension and Type 2 diabetes mellitus are common polygenetic disorders which have a major impact on public health. Disease prevalence and progression to cardiovascular complications, such as myocardial infarction (MI), stroke or heart failure, are the product of environment and gene interaction. The LUdwigshafen RIsk and Cardiovascular Health (LURIC) study aims to provide a well-defined resource for the study of environmental and genetic risk factors, and their interactions, and the study of functional relationships between gene variation and biochemical phenotype (functional genomics) or response to medication (pharmacogenomics). Long-term follow-up on clinical events will allow us to study the prognostic importance of common genetic variants (polymorphisms) and plasma biomarkers. Cardiology unit in tertiary care medical centre in south-west Germany. Prospective cohort study of individuals with and without cardiovascular disease at baseline. LURIC is an ongoing prospective study of currently > 3300 individuals in whom the cardiovascular and metabolic phenotypes CAD, MI, dyslipidaemia, hypertension, metabolic syndrome and diabetes mellitus have been defined or ruled out using standardised methodologies in all study participants. Inclusion criteria for LURIC were: German ancestry (limitation of genetic heterogeneity) clinical stability (except for acute coronary syndromes [ACSs]) availability of a coronary angiogram (this inclusion criterium was waived for family members provided that they met all other inclusion and exclusion criteria) Exclusion criteria were: any acute illness other than ACSs any chronic disease where non-cardiac disease predominated a history of malignancy within the past five years. Exclusion criteria were pre-specified in order to minimise the impact of concomitant non-cardiovascular disease on intermediate biochemical phenotypes or on clinical prognosis (limitation of clinical heterogeneity). A standardised personal and family history questionnaire and an extensive laboratory work-up (including glucose tolerance testing in non-diabetics and objective assessment of smoking exposure by determination of cotinine plasma levels) was obtained from all individuals after informed consent. A total of 115 ml of fasting venous blood was sampled for the determination of a pre-specified wide range of intermediate biochemical phenotypes in serum, plasma or whole blood, for leukocyte DNA extraction and immortalisation of B-lymphocytes. Biochemical phenotypes measured included markers of endothelial dysfunction, inflammation, oxidative status, coagulation, lipid metabolism and flow cytometric surface receptor expression of lympho-, mono- and thrombocytes. In addition, multiple aliquots of blood samples were stored for future analyses. A total of 3500 LURIC baseline measurements were performed in 3316 individuals between July 1997 and January 2000. The baseline examination was repeated within a median of 35 days in 5% of study participants (n = 166, including a third examination in 18 after a median of 69 days) for pharmacogenomic assessment of lipid-lowering therapy and for quality control purposes. A five-year follow-up on major clinical events (death, any cardiovascular event including MI, stroke and revascularisation, malignancy and any hospitalisation) is ongoing. The clinical phenotypes prevalent at baseline in the cohort of 2309 men (70%) with a mean age of 62 +/- 11 years and 1007 women (30%), mean age 65 +/- 10 years, were angiographically-documented CAD in 2567 (79%), MI in 1368 (41%), dyslipidaemia in 2050 (62%) with hypercholesterolaemia > or = 240 mg/dl (27%), hypertriglyceridaemia > or = 150 mg/dl (44%) and HDL-cholesterol < or = 35 mg/dl (38%) in individuals not treated with lipid-lowering agents, systemic hypertension in 1921 (58%), metabolic syndrome in 1591 (48%), Type 2 diabetes in 1063 (32%) and obesity defined by body mass index > or = 30 kg/m2 in 770 (23%). Control patients in whom CAD had been ruled out angiographically were five years younger than those with CAD (59 +/- 12 and 64 +/- 10 years, respectively; p < 0.001), twice as often females (48% compared to 25% females in the CAD group, p < 0.001) and had significantly less cardiovascular risk factors than individuals with CAD. The prevalence of specific cardiovascular risk subsets in LURIC, such as the elderly (> or = 75 years), was 375 (11%), while 213 (6%) were young adults (< 45 years) and 904 (27%) were postmenopausal women (90% of all females). A low risk status (< or = 1 out of the four traditional risk factors: dyslipidaemia, smoking, hypertension and diabetes mellitus) was identified in 314 (9%) individuals of the entire cohort (5% in CAD and 26% in controls, p < 0.001) and 97 (3%) carried none of the four risk factors (1% in CAD and 9% in controls, p < 0.001). (ABSTRACT TRUNCATED)

Differential diagnosis of CT focal liver lesions using texture features, feature selection and ensemble driven classifiers.

PubMed

Mougiakakou, Stavroula G; Valavanis, Ioannis K; Nikita, Alexandra; Nikita, Konstantina S

2007-09-01

The aim of the present study is to define an optimally performing computer-aided diagnosis (CAD) architecture for the classification of liver tissue from non-enhanced computed tomography (CT) images into normal liver (C1), hepatic cyst (C2), hemangioma (C3), and hepatocellular carcinoma (C4). To this end, various CAD architectures, based on texture features and ensembles of classifiers (ECs), are comparatively assessed. Number of regions of interests (ROIs) corresponding to C1-C4 have been defined by experienced radiologists in non-enhanced liver CT images. For each ROI, five distinct sets of texture features were extracted using first order statistics, spatial gray level dependence matrix, gray level difference method, Laws' texture energy measures, and fractal dimension measurements. Two different ECs were constructed and compared. The first one consists of five multilayer perceptron neural networks (NNs), each using as input one of the computed texture feature sets or its reduced version after genetic algorithm-based feature selection. The second EC comprised five different primary classifiers, namely one multilayer perceptron NN, one probabilistic NN, and three k-nearest neighbor classifiers, each fed with the combination of the five texture feature sets or their reduced versions. The final decision of each EC was extracted by using appropriate voting schemes, while bootstrap re-sampling was utilized in order to estimate the generalization ability of the CAD architectures based on the available relatively small-sized data set. The best mean classification accuracy (84.96%) is achieved by the second EC using a fused feature set, and the weighted voting scheme. The fused feature set was obtained after appropriate feature selection applied to specific subsets of the original feature set. The comparative assessment of the various CAD architectures shows that combining three types of classifiers with a voting scheme, fed with identical feature sets obtained after appropriate feature selection and fusion, may result in an accurate system able to assist differential diagnosis of focal liver lesions from non-enhanced CT images.

Cardiovascular disease in Chinese Canadians: a case-mix study from an urban tertiary care cardiology clinic.

PubMed

Tso, David K; Moe, Gordon

2002-08-01

Cardiovascular diseases (CVD) are the leading cause of death in Canada. Non-European ethnic groups such as the Chinese constitute an increasingly significant sector of the Canadian population. To compare the frequency and risk factors of CVD in Chinese and white Canadians in a cardiology referral clinic that saw a high number of ethnic Chinese patients and provided equal access to advanced diagnostic facilities. Clinic charts of patients referred between 1994 and 1999 were reviewed. Patients of Chinese descent were identified by their names. Primary cardiovascular and secondary cardiovascular diagnoses, as well as risk factors for coronary artery disease (CAD), were established. The frequency of disease and risk factors were age-standardized. The sample of patients with CVD consisted of 404 Chinese and 1129 white subjects. Chinese patients were older (median age 65 versus 62 years, P=0.006). CAD, heart failure and peripheral vascular disease were less frequent in Chinese than in white patients. On the other hand, valvular heart disease was more frequent in Chinese patients. Diabetes, smoking and family history of heart disease were less frequent in Chinese subjects, whereas the frequencies of hypertension and hypercholerolemia were similar to those of white patients. In patients who had undergone coronary angiography, the frequency of multivessel CAD was less in Chinese patients (40% versus 56%, P=0.0016). Angina pectoris was a more common manifestation of CAD in Chinese patients, whereas myocardial infarction was more common in people who were white. In patients with heart failure, the median left ventricular ejection fraction was higher in Chinese than in white patients (34% versus 28%, P=0.031). In patients referred to a cardiology clinic, the diagnosis of CAD and the majority of other CVDs was less frequent in Chinese Canadians than in white Canadians. However, selected modifiable risk factors for CAD, such as hypertension and hypercholesterolemia, were equally frequent. Further research at the population level is warranted to define the characteristics of CVD in Chinese Canadians, and may be useful to the future design of disease management and prevention programs tailored to the needs of this growing ethnic population.

A risk score for predicting coronary artery disease in women with angina pectoris and abnormal stress test finding.

PubMed

Lo, Monica Y; Bonthala, Nirupama; Holper, Elizabeth M; Banks, Kamakki; Murphy, Sabina A; McGuire, Darren K; de Lemos, James A; Khera, Amit

2013-03-15

Women with angina pectoris and abnormal stress test findings commonly have no epicardial coronary artery disease (CAD) at catheterization. The aim of the present study was to develop a risk score to predict obstructive CAD in such patients. Data were analyzed from 337 consecutive women with angina pectoris and abnormal stress test findings who underwent cardiac catheterization at our center from 2003 to 2007. Forward selection multivariate logistic regression analysis was used to identify the independent predictors of CAD, defined by ≥50% diameter stenosis in ≥1 epicardial coronary artery. The independent predictors included age ≥55 years (odds ratio 2.3, 95% confidence interval 1.3 to 4.0), body mass index <30 kg/m(2) (odds ratio 1.9, 95% confidence interval 1.1 to 3.1), smoking (odds ratio 2.6, 95% confidence interval 1.4 to 4.8), low high-density lipoprotein cholesterol (odds ratio 2.9, 95% confidence interval 1.5 to 5.5), family history of premature CAD (odds ratio 2.4, 95% confidence interval 1.0 to 5.7), lateral abnormality on stress imaging (odds ratio 2.8, 95% confidence interval 1.5 to 5.5), and exercise capacity <5 metabolic equivalents (odds ratio 2.4, 95% confidence interval 1.1 to 5.6). Assigning each variable 1 point summed to constitute a risk score, a graded association between the score and prevalent CAD (ptrend <0.001). The risk score demonstrated good discrimination with a cross-validated c-statistic of 0.745 (95% confidence interval 0.70 to 0.79), and an optimized cutpoint of a score of ≤2 included 62% of the subjects and had a negative predictive value of 80%. In conclusion, a simple clinical risk score of 7 characteristics can help differentiate those more or less likely to have CAD among women with angina pectoris and abnormal stress test findings. This tool, if validated, could help to guide testing strategies in women with angina pectoris. Copyright © 2013 Elsevier Inc. All rights reserved.

Systems Genetics Analysis of Genome-Wide Association Study Reveals Novel Associations Between Key Biological Processes and Coronary Artery Disease.

PubMed

Ghosh, Sujoy; Vivar, Juan; Nelson, Christopher P; Willenborg, Christina; Segrè, Ayellet V; Mäkinen, Ville-Petteri; Nikpay, Majid; Erdmann, Jeannette; Blankenberg, Stefan; O'Donnell, Christopher; März, Winfried; Laaksonen, Reijo; Stewart, Alexandre F R; Epstein, Stephen E; Shah, Svati H; Granger, Christopher B; Hazen, Stanley L; Kathiresan, Sekar; Reilly, Muredach P; Yang, Xia; Quertermous, Thomas; Samani, Nilesh J; Schunkert, Heribert; Assimes, Themistocles L; McPherson, Ruth

2015-07-01

Genome-wide association studies have identified multiple genetic variants affecting the risk of coronary artery disease (CAD). However, individually these explain only a small fraction of the heritability of CAD and for most, the causal biological mechanisms remain unclear. We sought to obtain further insights into potential causal processes of CAD by integrating large-scale GWA data with expertly curated databases of core human pathways and functional networks. Using pathways (gene sets) from Reactome, we carried out a 2-stage gene set enrichment analysis strategy. From a meta-analyzed discovery cohort of 7 CAD genome-wide association study data sets (9889 cases/11 089 controls), nominally significant gene sets were tested for replication in a meta-analysis of 9 additional studies (15 502 cases/55 730 controls) from the Coronary ARtery DIsease Genome wide Replication and Meta-analysis (CARDIoGRAM) Consortium. A total of 32 of 639 Reactome pathways tested showed convincing association with CAD (replication P<0.05). These pathways resided in 9 of 21 core biological processes represented in Reactome, and included pathways relevant to extracellular matrix (ECM) integrity, innate immunity, axon guidance, and signaling by PDRF (platelet-derived growth factor), NOTCH, and the transforming growth factor-β/SMAD receptor complex. Many of these pathways had strengths of association comparable to those observed in lipid transport pathways. Network analysis of unique genes within the replicated pathways further revealed several interconnected functional and topologically interacting modules representing novel associations (eg, semaphoring-regulated axonal guidance pathway) besides confirming known processes (lipid metabolism). The connectivity in the observed networks was statistically significant compared with random networks (P<0.001). Network centrality analysis (degree and betweenness) further identified genes (eg, NCAM1, FYN, FURIN, etc) likely to play critical roles in the maintenance and functioning of several of the replicated pathways. These findings provide novel insights into how genetic variation, interpreted in the context of biological processes and functional interactions among genes, may help define the genetic architecture of CAD. © 2015 American Heart Association, Inc.

Myocardial perfusion imaging in patients with a recent, normal exercise test.

PubMed

Bovin, Ann; Klausen, Ib C; Petersen, Lars J

2013-03-26

To investigate the added value of myocardial perfusion scintigraphy imaging (MPI) in consecutive patients with suspected coronary artery disease (CAD) and a recent, normal exercise electrocardiography (ECG). This study was a retrospective analysis of consecutive patients referred for MPI during a 2-year period from 2006-2007 at one clinic. All eligible patients were suspected of suffering from CAD, and had performed a satisfactory bicycle exercise test (i.e., peak heart rate > 85% of the expected, age-predicted maximum) within 6 mo of referral, their exercise ECG was had no signs of ischemia, there was no exercise-limiting angina, and no cardiac events occurred between the exercise test and referral. The patients subsequently underwent a standard 2-d, stress-rest exercise MPI. Ischemia was defined based on visual scoring supported by quantitative segmental analysis (i.e., sum of stress score > 3). The results of cardiac catheterization were analyzed, and clinical follow up was performed by review of electronic medical files. A total of 56 patients fulfilled the eligibility criteria. Most patients had a low or intermediate ATPIII pre-test risk of CAD (6 patients had a high pre-test risk). The referral exercise test showed a mean Duke score of 5 (range: 2 to 11), which translated to a low post-exercise risk in 66% and intermediate risk in 34%. A total of seven patients were reported with ischemia by MPI. Three of these patients had high ATPIII pre-test risk scores. Six of these seven patients underwent cardiac catheterization, which showed significant stenosis in one patient with a high pre-test risk of CAD, and indeterminate lesions in three patients (two of whom had high pre-test risk scores). With MPI as a gate keeper for catheterization, no significant, epicardial stenosis was observed in any of the 50 patients (0%, 95% confidence interval 0.0 to 7.1) with low to intermediate pre-test risk of CAD and a negative exercise test. No cardiac events occurred in any patients within a median follow up period of > 1200 d. The added diagnostic value of MPI in patients with low or intermediate risk of CAD and a recent, normal exercise test is marginal.

Influence of Surface Conditioning Protocols on Reparability of CAD/CAM Zirconia-reinforced Lithium Silicate Ceramic.

PubMed

Al-Thagafi, Rana; Al-Zordk, Walid; Saker, Samah

2016-01-01

To test the effect of surface conditioning protocols on the reparability of CAD/CAM zirconia-reinforced lithium silicate ceramic compared to lithium-disilicate glass ceramic. Zirconia-reinforced lithium silicate ceramic (Vita Suprinity) and lithium disilicate glass-ceramic blocks (IPS e.max CAD) were categorized into four groups based on the surface conditioning protocol used. Group C: no treatment (control); group HF: 5% hydrofluoric acid etching for 60 s, silane (Monobond-S) application for 60 s, air drying; group HF-H: 5% HF acid etching for 60 s, application of silane for 60 s, air drying, application of Heliobond, light curing for 20 s; group CO: sandblasting with CoJet sand followed by silanization. Composite resin (Tetric EvoCeram) was built up into 4 x 6 x 3 mm blocks using teflon molds. All specimens were subjected to thermocycling (5000x, 5°C to 55°C). The microtensile bond strength test was employed at a crosshead speed of 1 mm/min. SEM was employed for evaluation of all the debonded microbars, the failure type was categorized as either adhesive (failure at adhesive layer), cohesive (failure at ceramic or composite resin), or mixed (failure between adhesive layer and substrate). Two-way ANOVA and the Tukey's HSD post-hoc test were applied to test for significant differences in bond strength values in relation to different materials and surface pretreatment (p < 0.05). The highest microtensile repair bond strength for Vita Suprinity was reported in group CO (33.1 ± 2.4 MPa) and the lowest in group HF (27.4 ± 4.4 MPa). Regarding IPS e.max CAD, group CO showed the highest (30.5 ± 4.9 MPa) and HF the lowest microtensile bond strength (22.4 ± 5.7 MPa). Groups HF, HF-H, and CO showed statistically significant differences in terms of all ceramic types used (p < 0.05). The control group showed exclusively adhesive failures, while in HF, HF-H, and CO groups, mixed failures were predominant. Repair bond strength to zirconia-reinforced lithium silicate ceramics and lithium-disilicate glass ceramic could be improved when ceramic surfaces are sandblasted with CoJet sand followed by silanization.

Resistance to bond degradation between dual-cure resin cements and pre-treated sintered CAD-CAM dental ceramics

PubMed Central

Osorio, Raquel; Monticelli, Francesca; Osorio, Estrella; Toledano, Manuel

2012-01-01

Objective: To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. Study design: Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al2O3-particles); and Group 3: Silica-coating (50 µm silica-modified Al2O3-particles). Composite samples were randomly bonded to the pre-treated ceramic surfaces using different resin cements: Subgroup 1: Clearfil Esthetic Cement (CEC); Subgroup 2: RelyX Unicem (RXU); and Subgroup 3: Calibra (CAL). After 24 h, bonded specimens were cut into 1 ± 0.1 mm2 sticks. One-half of the beams were tested for microtensile bond strength (MTBS). The remaining one-half was immersed in 10 % NaOCl aqueous solution (NaOClaq) for 5 h before testing. The fracture pattern and morphology of the debonded surfaces were assessed with a field emission gun scanning electron microscope (FEG-SEM). A multiple ANOVA was conducted to analyze the contributions of ceramic composition, surface treatment, resin cement type, and chemical challenging to MTBS. The Tukey test was run for multiple comparisons (p < 0.05). Results: After 24 h, CEC luted to pre-treated zirconia achieved the highest MTBS. Using RXU, alumina and zirconia registered comparable MTBS. CAL failed prematurely, except when luted to sandblasted zirconia. After NaOClaq storage, CEC significantly lowered MTBS when luted to zirconia or alumina. RXU decreased MTBS only when bonded to silica-coated alumina. CAL recorded 100 % of pre-testing failures. Micromorphological alterations were evident after NaOClaq immersion. Conclusions: Resin-ceramic interfacial longevity depended on cement selection rather than on surface pre-treatments. The MDP-containing and the self-adhesive resin cements were both suitable for luting CAD/CAM ceramics. Despite both cements being prone to degradation, RXU luted to zirconia or untreated or sandblasted alumina showed the most stable interfaces. CAL experimented spontaneous debonding in all tested groups. Key words:CAD/CAM ceramic, alumina, zirconia, resin cement, surface pre-treatment, sandblasting, silica-coating, chemical aging, bond degradation, microtensile bond strength. PMID:22322517

Association of the I148M/PNPLA3 (rs738409) polymorphism with premature coronary artery disease, fatty liver, and insulin resistance in type 2 diabetic patients and healthy controls. The GEA study.

PubMed

Posadas-Sánchez, Rosalinda; López-Uribe, Ángel René; Posadas-Romero, Carlos; Pérez-Hernández, Nonanzit; Rodríguez-Pérez, José Manuel; Ocampo-Arcos, Wendy Angélica; Fragoso, José Manuel; Cardoso-Saldaña, Guillermo; Vargas-Alarcón, Gilberto

2017-10-01

The aim of this study was to evaluate the potential use of the I148M/PNPLA3 (rs738409) gene polymorphism as a susceptibility marker for premature coronary artery disease (pCAD) and/or cardiovascular risk factors in Mexican type 2 diabetes mellitus patients (T2DM). The polymorphism was genotyped by 5' exonuclease TaqMan assays in a group of 2572 subjects (1103 with pCAD and 1469 healthy controls) belonging to the Genetics of Atherosclerotic Disease (GEA) Mexican Study. Anthropometric and biochemical measurements were performed in all individuals. The association between the I148M/PNPLA3 (rs738409) gene polymorphism with pCAD and other metabolic and cardiovascular risk factors was evaluated using logistic regression analysis under different statistical approaches including dominant, recessive, heterozygous, additive, and co-dominant models. The polymorphism was not associated with pCAD in the whole group of participants, however, when patients and controls were divided into those with and without T2DM, under additive model, the polymorphism was associated with the presence of pCAD only in patients with T2DM (OR=1.20, 95% CI: 1.01-1.42, P add =0.042). On the other hand, under several models adjusted for age, gender, body mass index and T2DM, the polymorphism was associated with increased risk of fatty liver and elevated levels of alanine transaminase (ALT) in the whole group of pCAD patients and controls. In the control group, the polymorphism was associated with insulin resistance and coronary artery calcification (CAC) score≥10 under several models. The results suggest that the I148M/PNPLA3 (rs738409) polymorphism is associated with the presence of pCAD in T2DM patients and with some cardiometabolic parameters. The association detected with CAC in the control group indicates that this polymorphism could be a marker for subclinical atherosclerosis. Copyright © 2016 Elsevier GmbH. All rights reserved.

A walk through the planned CS building. M.S. Thesis

NASA Technical Reports Server (NTRS)

Khorramabadi, Delnaz

1991-01-01

Using the architectural plan views of our future computer science building as test objects, we have completed the first stage of a Building walkthrough system. The inputs to our system are AutoCAD files. An AutoCAD converter translates the geometrical information in these files into a format suitable for 3D rendering. Major model errors, such as incorrect polygon intersections and random face orientations, are detected and fixed automatically. Interactive viewing and editing tools are provided to view the results, to modify and clean the model and to change surface attributes. Our display system provides a simple-to-use user interface for interactive exploration of buildings. Using only the mouse buttons, the user can move inside and outside the building and change floors. Several viewing and rendering options are provided, such as restricting the viewing frustum, avoiding wall collisions, and selecting different rendering algorithms. A plan view of the current floor, with the position of the eye point and viewing direction on it, is displayed at all times. The scene illumination can be manipulated, by interactively controlling intensity values for 5 light sources.

Rewiring a secondary metabolite pathway towards itaconic acid production in Aspergillus niger.

PubMed

Hossain, Abeer H; Li, An; Brickwedde, Anja; Wilms, Lars; Caspers, Martien; Overkamp, Karin; Punt, Peter J

2016-07-28

The industrially relevant filamentous fungus Aspergillus niger is widely used in industry for its secretion capabilities of enzymes and organic acids. Biotechnologically produced organic acids promise to be an attractive alternative for the chemical industry to replace petrochemicals. Itaconic acid (IA) has been identified as one of the top twelve building block chemicals which have high potential to be produced by biotechnological means. The IA biosynthesis cluster (cadA, mttA and mfsA) has been elucidated in its natural producer Aspergillus terreus and transferred to A. niger to enable IA production. Here we report the rewiring of a secondary metabolite pathway towards further improved IA production through the overexpression of a putative cytosolic citrate synthase citB in a A. niger strain carrying the IA biosynthesis cluster. We have previously shown that expression of cadA from A. terreus results in itaconic acid production in A. niger AB1.13, albeit at low levels. This low-level production is boosted fivefold by the overexpression of mttA and mfsA in itaconic acid producing AB1.13 CAD background strains. Controlled batch cultivations with AB1.13 CAD + MFS + MTT strains showed increased production of itaconic acid compared with AB1.13 CAD strain. Moreover, preliminary RNA-Seq analysis of an itaconic acid producing AB1.13 CAD strain has led to the identification of the putative cytosolic citrate synthase citB which was induced in an IA producing strain. We have overexpressed citB in a AB1.13 CAD + MFS + MTT strain and by doing so hypothesize to have targeted itaconic acid production to the cytosolic compartment. By overexpressing citB in AB1.13 CAD + MFS + MTT strains in controlled batch cultivations we have achieved highly increased titers of up to 26.2 g/L IA with a productivity of 0.35 g/L/h while no CA was produced. Expression of the IA biosynthesis cluster in Aspergillus niger AB1.13 strain enables IA production. Moreover, in the AB1.13 CAD strain IA production resulted in overexpression of a putative cytosolic citrate synthase citB. Upon overexpression of citB we have achieved titers of up to 26.2 g/L IA with a productivity of 0.35 g/L/h in controlled batch cultivations. By overexpressing citB we have also diminished side product formation and optimized the production pathway towards IA.

Sense-and-Avoid Equivalent Level of Safety Definition for Unmanned Aircraft Systems. Revision 9

NASA Technical Reports Server (NTRS)

2005-01-01

Since unmanned aircraft do not have a pilot on-board the aircraft, they cannot literally comply with the "see and avoid" requirement beyond a short distance from the location of the unmanned pilot. No performance standards are presently defined for unmanned Sense and Avoid systems, and the FAA has no published approval criteria for a collision avoidance system. Before the FAA can develop the necessary guidance (rules / regulations / policy) regarding the see-and-avoid requirements for Unmanned Aircraft Systems (UAS), a concise understanding of the term "equivalent level of safety" must be attained. Since this term is open to interpretation, the UAS industry and FAA need to come to an agreement on how this term can be defined and applied for a safe and acceptable collision avoidance capability for unmanned aircraft. Defining an equivalent level of safety (ELOS) for sense and avoid is one of the first steps in understanding the requirement and developing a collision avoidance capability. This document provides a functional level definition of see-and-avoid as it applies to unmanned aircraft. The sense and avoid ELOS definition is intended as a bridge between the see and avoid requirement and the system level requirements for unmanned aircraft sense and avoid systems. Sense and avoid ELOS is defined in a rather abstract way, meaning that it is not technology or system specific, and the definition provides key parameters (and a context for those parameters) to focus the development of cooperative and non-cooperative sense and avoid system requirements.

Joint modelling of potentially avoidable hospitalisation for five diseases accounting for spatiotemporal effects: A case study in New South Wales, Australia.

PubMed

Baker, Jannah; White, Nicole; Mengersen, Kerrie; Rolfe, Margaret; Morgan, Geoffrey G

2017-01-01

Three variant formulations of a spatiotemporal shared component model are proposed that allow examination of changes in shared underlying factors over time. Models are evaluated within the context of a case study examining hospitalisation rates for five chronic diseases for residents of a regional area in New South Wales: type II diabetes mellitus (DMII), chronic obstructive pulmonary disease (COPD), coronary arterial disease (CAD), hypertension (HT) and congestive heart failure (CHF) between 2001-2006. These represent ambulatory care sensitive (ACS) conditions, often used as a proxy for avoidable hospitalisations. Using a selected model, the effects of socio-economic status (SES) as a shared component are estimated and temporal patterns in the influence of the residual shared spatial component are examined. Choice of model depends upon the application. In the featured application, a model allowing for changing influence of the shared spatial component over time was found to have the best fit and was selected for further analyses. Hospitalisation rates were found to be increasing for COPD and DMII, decreasing for CHF and stable for CAD and HT. SES was substantively associated with hospitalisation rates, with differing degrees of influence for each disease. In general, most of the spatial variation in hospitalisation rates was explained by disease-specific spatial components, followed by the residual shared spatial component. Appropriate selection of a joint disease model allows for the examination of temporal patterns of disease outcomes and shared underlying spatial factors, and distinction between different shared spatial factors.

Phylogeny and expression profiling of CAD and CAD-like genes in hybrid Populus (P. deltoides × P. nigra): evidence from herbivore damage for subfunctionalization and functional divergence

PubMed Central

2010-01-01

Background Cinnamyl Alcohol Dehydrogenase (CAD) proteins function in lignin biosynthesis and play a critical role in wood development and plant defense against stresses. Previous phylogenetic studies did not include genes from seedless plants and did not reflect the deep evolutionary history of this gene family. We reanalyzed the phylogeny of CAD and CAD-like genes using a representative dataset including lycophyte and bryophyte sequences. Many CAD/CAD-like genes do not seem to be associated with wood development under normal growth conditions. To gain insight into the functional evolution of CAD/CAD-like genes, we analyzed their expression in Populus plant tissues in response to feeding damage by gypsy moth larvae (Lymantria dispar L.). Expression of CAD/CAD-like genes in Populus tissues (xylem, leaves, and barks) was analyzed in herbivore-treated and non-treated plants by real time quantitative RT-PCR. Results CAD family genes were distributed in three classes based on sequence conservation. All the three classes are represented by seedless as well as seed plants, including the class of bona fide lignin pathway genes. The expression of some CAD/CAD-like genes that are not associated with xylem development were induced following herbivore damage in leaves, while other genes were induced in only bark or xylem tissues. Five of the CAD/CAD-like genes, however, showed a shift in expression from one tissue to another between non-treated and herbivore-treated plants. Systemic expression of the CAD/CAD-like genes was generally suppressed. Conclusions Our results indicated a correlation between the evolution of the CAD gene family and lignin and that the three classes of genes may have evolved in the ancestor of land plants. Our results also suggest that the CAD/CAD-like genes have evolved a diversity of expression profiles and potentially different functions, but that they are nonetheless co-regulated under stress conditions. PMID:20509918

The degree of premature hair graying as an independent risk marker for coronary artery disease: a predictor of biological age rather than chronological age.

PubMed

Kocaman, Sinan Altan; Çetin, Mustafa; Durakoğlugil, Murtaza Emre; Erdoğan, Turan; Çanga, Aytun; Çiçek, Yüksel; Doğan, Sıtkı; Şahin, Ismail; Şatıroğlu, Omer; Bostan, Mehmet

2012-09-01

Age is the most important and uncorrectable coronary risk factor at the moment. The concept of measuring aging biologically rather than only chronologically may be of importance in clinical practice. Hair graying is the most apparent sign of biological aging in humans, yet its mechanism is largely unknown. Today, it is known that cardiovascular risk factors (CVRFs), especially in combination, cause premature atherosclerosis. In our opinion, premature hair graying or whitening may represent early atherosclerotic changes as a surrogate of host response to the CVRFs. In this study, we planned to investigate the relationship of hair graying with CVRFs and coronary atherosclerotic burden in order to determine whether it is an independent marker for coronary artery disease (CAD). The current study has a cross-sectional observational design. Two hundred and thirteen men who underwent coronary angiography with a suspicion of CAD were enrolled in the study. The patients were evaluated in terms of age, demographical properties and the CVRFs. Hair whitening score (HWS) was defined according to extent of gray/white hairs (1: pure black; 2: black>white; 3: black=white; 4: white>black; 5: pure white). Coronary atherosclerotic burden was assessed by the Gensini score. Analyses were performed in age-matched normal coronary arteries (NCA) and CAD groups. Linear and logistic regression analyses were used for the multivariate analyses of independent variables associated with hair greying. The CVRFs were higher in CAD group. Hair whitening score (2.7 ± 1.3 vs. 3.3 ± 1.2, p=0.002), hair losing score (1.2 ± 0.9 vs. 1.5 ± 1.0, p=0.038) and xanthelasma rate (24% vs. 45%, p=0.013) were also significantly different between NCA and CAD groups. Age (p<0001), Gensini score (p<0.001) and coronary severity score (p=0.001) were higher in the categories of increased HWS. In multiple logistic regression analysis, only diabetes mellitus (OR: 3.240, 95% CI: [1.017-10.319], p=0.047), low-density lipoprotein cholesterol, (OR: 1.014, 95%CI: [1.001-1.027], p=0.029) and HWS (OR: 1.513, 95% CI: [1.054-2.173], p=0.025) were independently related to presence of CAD. Age (p<0.001), family history of CAD (p=0.004), hyperlipidemia (p=0.02) and serum creatinine levels (p=0.019) were found as independent predictors of hair graying. In our study, we found that the degree of gray/white hairs is related to extent of CAD. Our findings also suggested that hair graying is a risk marker for CAD independent of age and other traditional risk factors. Biological age may be important in determining total risk of patients. During assessment of cumulative CVRF effects on human body, presence of biological aging signs may be useful in identifying individuals with increased risk of cardiovascular disease.

Effect of surface treatments on the bond strength of CAD/CAM fiberglass posts

PubMed Central

Garcia, Paula-Pontes; da Costa, Rogério-Goulart; Garcia, André-Vivan; Gonzaga, Carla-Castiglia; da Cunha, Leonardo-Fernandes; Rezende, Carlos-Eduardo-Edwards

2018-01-01

Background There is no ideal protocol for the surface treatment of fiber posts, especially when using a computer-aided design/computer-aided manufacturing (CAD/CAM) experimental fiberglass block. The purpose of this study was to evaluate the bond strength of a CAD/CAM customized glass fiber post and core after applying different surface treatment techniques. Material and Methods Forty premolars were prepared to receive a customized CAD/CAM glass-fiber post and core obtained from an experimental block of glass fiber and epoxy resin. The specimens were randomly distributed in 4 groups (n=10) according to the post and core surface treatment: ETH - 70% ethanol; HP - 24% hydrogen peroxide for 1 minute; ETH/S - 70% ethanol + silane; HP/S - 24% hydrogen peroxide + silane. The universal adhesive containing silane was applied on the posts and prepared post spaces in all groups. The posts were cemented using dual cure resin cement. The specimens were stored in distilled water at 37°C for 24 h, cut (two slices of 1 mm for each root third - coronal, middle, and apical) and subjected to push-out test (0.5 mm/min). Data was subjected to two-way ANOVA (surface treatment and root third) and Tukey’s test (α=0,05). Results There was no significant difference of bond strength values among groups, regardless the surface treatment (p >0.05). There was significant difference on bond strength values for the different root thirds (p<0.05) (coronal>middle=apical). Conclusions The different surface treatment and application of additional silane in the CAD/CAM customized glass-fiber post and core does not interfere on bond strength values. The root dentin third interfered on the bond strength, with higher values for the coronal third. Key words:Post and core technique, cad/cam, shear strength, hydrogen peroxide. PMID:29930778

Cardiovascular Disease and 10-Year Mortality in Postmenopausal Women with Clinical Features of Polycystic Ovary Syndrome.

PubMed

Merz, C Noel Bairey; Shaw, Leslee J; Azziz, Ricardo; Stanczyk, Frank Z; Sopko, George; Braunstein, Glenn D; Kelsey, Sheryl F; Kip, Kevin E; Cooper-DeHoff, Rhonda M; Johnson, B Delia; Vaccarino, Viola; Reis, Steven E; Bittner, Vera; Hodgson, T Keta; Rogers, William; Pepine, Carl J

2016-09-01

Women with polycystic ovary syndrome (PCOS) have greater cardiac risk factor clustering but the link with mortality is incompletely described. To evaluate outcomes in 295 postmenopausal women enrolled in the National Institutes of Health-National Heart, Lung, and Blood Institute (NIH-NHLBI) sponsored Women's Ischemia Syndrome Evaluation (WISE) study according to clinical features of PCOS. A total of 25/295 (8%) women had clinical features of PCOS defined by a premenopausal history of irregular menses and current biochemical evidence of hyperandrogenemia, defined as the top quartile of androstenedione (≥701 pg/mL), testosterone (≥30.9 ng/dL), or free testosterone (≥4.5 pg/mL). Cox proportional hazard model estimated death (n = 80). Women with clinical features of PCOS had an earlier menopause (p = 0.01), were more often smokers (p < 0.04), and trended toward more angiographic coronary artery disease (CAD) (p = 0.07) than women without these features. Cumulative 10-year mortality was 28% for women with (n = 25) versus 27% without clinical features of PCOS (n = 270) (p = 0.85). PCOS was not a significant predictor (p = NS) in prognostic models including diabetes, waist circumference, hypertension, and angiographic CAD. From this longer-term follow up of a relatively small cohort of postmenopausal women with suspected ischemia, the prevalence of PCOS is similar to the general population, and clinical features of PCOS are not associated with CAD or mortality. These findings question whether identification of clinical features of PCOS in postmenopausal women who already have known cardiovascular disease provides any additional opportunity for risk factor intervention.

Cardiovascular Disease and 10-Year Mortality in Postmenopausal Women with Clinical Features of Polycystic Ovary Syndrome

PubMed Central

Shaw, Leslee J.; Azziz, Ricardo; Stanczyk, Frank Z.; Sopko, George; Braunstein, Glenn D.; Kelsey, Sheryl F.; Kip, Kevin E.; Cooper-DeHoff, Rhonda M.; Johnson, B. Delia; Vaccarino, Viola; Reis, Steven E.; Bittner, Vera; Hodgson, T. Keta; Rogers, William; Pepine, Carl J.

2016-01-01

Abstract Background: Women with polycystic ovary syndrome (PCOS) have greater cardiac risk factor clustering but the link with mortality is incompletely described. Objective: To evaluate outcomes in 295 postmenopausal women enrolled in the National Institutes of Health–National Heart, Lung, and Blood Institute (NIH-NHLBI) sponsored Women's Ischemia Syndrome Evaluation (WISE) study according to clinical features of PCOS. Materials and Methods: A total of 25/295 (8%) women had clinical features of PCOS defined by a premenopausal history of irregular menses and current biochemical evidence of hyperandrogenemia, defined as the top quartile of androstenedione (≥701 pg/mL), testosterone (≥30.9 ng/dL), or free testosterone (≥4.5 pg/mL). Cox proportional hazard model estimated death (n = 80). Results: Women with clinical features of PCOS had an earlier menopause (p = 0.01), were more often smokers (p < 0.04), and trended toward more angiographic coronary artery disease (CAD) (p = 0.07) than women without these features. Cumulative 10-year mortality was 28% for women with (n = 25) versus 27% without clinical features of PCOS (n = 270) (p = 0.85). PCOS was not a significant predictor (p = NS) in prognostic models including diabetes, waist circumference, hypertension, and angiographic CAD. Conclusion: From this longer-term follow up of a relatively small cohort of postmenopausal women with suspected ischemia, the prevalence of PCOS is similar to the general population, and clinical features of PCOS are not associated with CAD or mortality. These findings question whether identification of clinical features of PCOS in postmenopausal women who already have known cardiovascular disease provides any additional opportunity for risk factor intervention. PMID:27267867

Relation of Coronary Flow Reserve to Other Findings on Positron Emission Tomography Myocardial Perfusion Imaging and Left Heart Catheterization in Patients With End-stage Renal Disease Being Evaluated for Kidney Transplant.

PubMed

Paz, Yehuda; Morgenstern, Rachelle; Weinberg, Richard; Chiles, Mariana; Bhatti, Navdeep; Ali, Ziad; Mohan, Sumit; Bokhari, Sabahat

2017-12-01

Cardiovascular disease is the leading cause of death in patients with end-stage renal disease (ESRD) and often goes undetected. Abnormal coronary flow reserve (CFR), which predicts increased risk of cardiac death, may be present in patients with ESRD without other evidence of coronary artery disease (CAD). We prospectively studied 131 patients who had rest and dipyridamole pharmacologic stress N 13 -ammonia positron emission tomography myocardial perfusion imaging (PET MPI) for kidney transplant evaluation. Thirty-four patients also had left heart catheterization. Abnormal PET MPI was defined as qualitative ischemia or infarct, stress electrocardiogram ischemia, or transient ischemic dilation. CFR was calculated as the ratio of stress to rest coronary blood flow. Global CFR < 2 was defined as abnormal. Of 131 patients who had PET MPI (66% male, 55.6 ± 12.1 years), 30% (39 of 131) had abnormal PET MPI and 59% (77 of 131) had abnormal CFR. In a subset of 34 patients who had left heart catheterization (66% male, 61.0 ± 12.1 years), 68% (23 of 34) had abnormal CFR on PET MPI, and 68% (23 of 34) had ≥70% obstruction on left heart catheterization. Abnormal CFR was not significantly associated with abnormal PET MPI (p = 0.13) or obstructive CAD on left heart catheterization (p = 0.26). In conclusion, in the first prospective study of PET MPI in patients with ESRD, abnormal CFR is highly prevalent and is independent of abnormal findings on PET MPI or obstructive CAD on left heart catheterization. Copyright © 2017 Elsevier Inc. All rights reserved.

The National Shipbuilding Research Program. Evaluation of Shipbuilding CAD/CAM Systems (Phase I)

DTIC Science & Technology

1996-10-14

Industries Norddeutsche Itiormations Systems GmbH Odense Steel Shipyard Sener Ingenieria y Sistemas SMK Ingenieurburo Verolrne Scheepswerf Heusden b.v...Systems Logimatic Marine Consultants A/S Mitsubishi Heavy Industries Norddeutsche Informations Systems GmbH Odense Steel Shipyard Sener Ingenieria y...market share and business backlog . continue profitable operation in spite of relentless price and schedule competition 11.0 SENERMAR Sener Ingenieria

ANMCO/GICR-IACPR/SICI-GISE Consensus Document: the clinical management of chronic ischaemic cardiomyopathy

PubMed Central

Gulizia, Michele Massimo; Colivicchi, Furio; Di Lenarda, Andrea; Musumeci, Giuseppe; Faggiano, Pompilio Massimo; Abrignani, Maurizio Giuseppe; Rossini, Roberta; Fattirolli, Francesco; Valente, Serafina; Mureddu, Gian Francesco; Temporelli, Pier Luigi; Olivari, Zoran; Amico, Antonio Francesco; Casolo, Giancarlo; Fresco, Claudio; Menozzi, Alberto; Nardi, Federico

2017-01-01

Stable coronary artery disease (CAD) is a clinical entity of great epidemiological importance. It is becoming increasingly common due to the longer life expectancy, being strictly related to age and to advances in diagnostic techniques and pharmacological and non-pharmacological interventions. Stable CAD encompasses a variety of clinical and anatomic presentations, making the identification of its clinical and anatomical features challenging. Therapeutic interventions should be defined on an individual basis according to the patient’s risk profile. To this aim, management flow charts have been reviewed based on sustainability and appropriateness derived from recent evidence. Special emphasis has been placed on non-pharmacological interventions, stressing the importance of lifestyle changes, including smoking cessation, regular physical activity, and diet. Adherence to therapy as an emerging risk factor is also discussed. PMID:28533729

Transcriptome-wide identification and characterization of CAD isoforms specific for podophyllotoxin biosynthesis from Podophyllum hexandrum.

PubMed

Bhattacharyya, Dipto; Hazra, Saptarshi; Banerjee, Anindyajit; Datta, Riddhi; Kumar, Deepak; Chakrabarti, Saikat; Chattopadhyay, Sharmila

2016-09-01

Podophyllotoxin (ptox) is a therapeutically important lignan derived from Podophyllum hexandrum and is used as a precursor for the synthesis of anticancer drugs etoposide, teniposide and etopophose. In spite of its enormous economic significance, genomic information on this endangered medicinal herb is scarce. We have performed de novo transcriptome analysis of methyl jasmonate (MeJA)-treated P. hexandrum cell cultures exhibiting enhanced ptox accumulation. The results revealed the maximum up-regulation of several isoforms of cinnamyl alcohol dehydrogenase (CAD). CAD catalyzes the synthesis of coniferyl alcohol and sinapyl alcohol from coniferaldehyde (CAld) and sinapaldehyde respectively. Coniferyl alcohol can produce both lignin and lignan while sinapyl alcohol produces only lignin. To isolate the CAD isoforms favoring ptox, we deduced full length cDNA sequences of four CAD isoforms: PhCAD1, PhCAD2, PhCAD3 and PhCAD4 from the contigs of the transcriptome data. In vitro enzyme assays indicated a higher affinity for CAld over sinapaldehyde for each isoform. In silico molecular docking analyses also suggested that PhCAD3 has a higher binding preference with CAld over sinapaldehyde, followed by PhCAD4, PhCAD2, and PhCAD1, respectively. The transgenic cell cultures overexpressing these isoforms independently revealed that PhCAD3 favored the maximum accumulation of ptox as compared to lignin followed by PhCAD4 and PhCAD2, whereas, PhCAD1 favored both equally. Together, our study reveals transcriptome-wide identification and characterization of ptox specific CAD isoforms from P. hexandrum. It provides a useful resource for future research not only on the ptox biosynthetic pathway but on overall P. hexandrum, an endangered medicinal herb with immense therapeutic importance.

NEGATIVE-ION MASS SPECTROMETRY OF SULFONYLUREA HERBICIDES

EPA Science Inventory

Sulfonylurea herbicides have been studied using neg-ion desorption chem.-ionization (DCI) mass spectrometry (MS) and DCI-MS/MS techniques. Both {M-H]- and M.- ions were obsd. in the DCI mass spectra. The collisonally activated dissocn. (CAD) spectra were characteristic of the str...

The Enzyme Activity and Substrate Specificity of Two Major Cinnamyl Alcohol Dehydrogenases in Sorghum (Sorghum bicolor), SbCAD2 and SbCAD4.

PubMed

Jun, Se-Young; Walker, Alexander M; Kim, Hoon; Ralph, John; Vermerris, Wilfred; Sattler, Scott E; Kang, ChulHee

2017-08-01

Cinnamyl alcohol dehydrogenase (CAD) catalyzes the final step in monolignol biosynthesis, reducing sinapaldehyde, coniferaldehyde, and p -coumaraldehyde to their corresponding alcohols in an NADPH-dependent manner. Because of its terminal location in monolignol biosynthesis, the variation in substrate specificity and activity of CAD can result in significant changes in overall composition and amount of lignin. Our in-depth characterization of two major CAD isoforms, SbCAD2 (Brown midrib 6 [bmr6]) and SbCAD4, in lignifying tissues of sorghum ( Sorghum bicolor ), a strategic plant for generating renewable chemicals and fuels, indicates their similarity in both structure and activity to Arabidopsis ( Arabidopsis thaliana ) CAD5 and Populus tremuloides sinapyl alcohol dehydrogenase, respectively. This first crystal structure of a monocot CAD combined with enzyme kinetic data and a catalytic model supported by site-directed mutagenesis allows full comparison with dicot CADs and elucidates the potential signature sequence for their substrate specificity and activity. The L119W/G301F-SbCAD4 double mutant displayed its substrate preference in the order coniferaldehyde > p -coumaraldehyde > sinapaldehyde, with higher catalytic efficiency than that of both wild-type SbCAD4 and SbCAD2. As SbCAD4 is the only major CAD isoform in bmr6 mutants, replacing SbCAD4 with L119W/G301F-SbCAD4 in bmr6 plants could produce a phenotype that is more amenable to biomass processing. © 2017 American Society of Plant Biologists. All Rights Reserved.

Is metabolic syndrome related with coronary artery disease severity and complexity: An observational study about IDF and AHA/NHLBI metabolic syndrome definitions.

PubMed

Aykan, Ahmet Çağrı; Gül, İlker; Kalaycıoğlu, Ezgi; Gökdeniz, Tayyar; Hatem, Engin; Menteşe, Ümit; Yıldız, Banu Şahin; Yıldız, Mustafa

2014-01-01

The aim of the present study was to assess the relation between metabolic syndrome (MS) and coronary artery disease (CAD) complexity, assessed by Syntax score (SS), and severity in non-diabetic patients with stable CAD who underwent coronary angiography, and to evaluate whether the MS defined by different definitions, including International Diabetes Federation (IDF) and American Heart Association/National Heart Lung Blood Institute (AHA/NHLBI) guidelines, similarly correlated with SS. The present study is cross sectional and observational with prospective inclusion of 248 consecutive patients (157 male) who underwent coronary angiography due to stable CAD. The prevalence of MS was 54.4% according to IDF definition and 50.4% according to AHA/NHLBI definition. MS score according to IDF definitions (r = 0.446, p < 0.001), MS score according to AHA/NHLBI definitions (r = 0.341, p < 0.001) were moderately correlated with SS. In Fisher r to z transformation test the correlations of the presence of MS according to IDF and AHA/NHLBI definitions with SS were not statistically significant (p = 0.168, z = -1.38). The systolic blood pressure (p < 0.001, B = 0.354, 95% CI = -0.308 to 0.228), diastolic blood pressure (p = 0.006, B = -0.194, 95% CI = -0.333 to -0.056), age (p = 0.014, B = 0.147, 95% CI = 0.029 to 0.264), left ventricular ejection fraction (p = 0.031, B = -0.150, 95% CI= -0.286 to -0.014), waist/hip circumference (p < 0.001, B = 45.713, 95% CI = 23.235 to 68.1919) and log10 high density lipoprotein (p < 0.001, B = -22.209, 95% CI = -33.298 to-11.119) were the independent predictors of SS in linear regression analysis. MS is associated with the presence and complexity of CAD. Besides the presence of discrepancy in the limits of waist circumference, both IDF and AHA/NHLBI criteria were similarly correlated with CAD complexity.

TinkerCell: modular CAD tool for synthetic biology.

PubMed

Chandran, Deepak; Bergmann, Frank T; Sauro, Herbert M

2009-10-29

Synthetic biology brings together concepts and techniques from engineering and biology. In this field, computer-aided design (CAD) is necessary in order to bridge the gap between computational modeling and biological data. Using a CAD application, it would be possible to construct models using available biological "parts" and directly generate the DNA sequence that represents the model, thus increasing the efficiency of design and construction of synthetic networks. An application named TinkerCell has been developed in order to serve as a CAD tool for synthetic biology. TinkerCell is a visual modeling tool that supports a hierarchy of biological parts. Each part in this hierarchy consists of a set of attributes that define the part, such as sequence or rate constants. Models that are constructed using these parts can be analyzed using various third-party C and Python programs that are hosted by TinkerCell via an extensive C and Python application programming interface (API). TinkerCell supports the notion of a module, which are networks with interfaces. Such modules can be connected to each other, forming larger modular networks. TinkerCell is a free and open-source project under the Berkeley Software Distribution license. Downloads, documentation, and tutorials are available at http://www.tinkercell.com. An ideal CAD application for engineering biological systems would provide features such as: building and simulating networks, analyzing robustness of networks, and searching databases for components that meet the design criteria. At the current state of synthetic biology, there are no established methods for measuring robustness or identifying components that fit a design. The same is true for databases of biological parts. TinkerCell's flexible modeling framework allows it to cope with changes in the field. Such changes may involve the way parts are characterized or the way synthetic networks are modeled and analyzed computationally. TinkerCell can readily accept third-party algorithms, allowing it to serve as a platform for testing different methods relevant to synthetic biology.

TinkerCell: modular CAD tool for synthetic biology

PubMed Central

Chandran, Deepak; Bergmann, Frank T; Sauro, Herbert M

2009-01-01

Background Synthetic biology brings together concepts and techniques from engineering and biology. In this field, computer-aided design (CAD) is necessary in order to bridge the gap between computational modeling and biological data. Using a CAD application, it would be possible to construct models using available biological "parts" and directly generate the DNA sequence that represents the model, thus increasing the efficiency of design and construction of synthetic networks. Results An application named TinkerCell has been developed in order to serve as a CAD tool for synthetic biology. TinkerCell is a visual modeling tool that supports a hierarchy of biological parts. Each part in this hierarchy consists of a set of attributes that define the part, such as sequence or rate constants. Models that are constructed using these parts can be analyzed using various third-party C and Python programs that are hosted by TinkerCell via an extensive C and Python application programming interface (API). TinkerCell supports the notion of a module, which are networks with interfaces. Such modules can be connected to each other, forming larger modular networks. TinkerCell is a free and open-source project under the Berkeley Software Distribution license. Downloads, documentation, and tutorials are available at . Conclusion An ideal CAD application for engineering biological systems would provide features such as: building and simulating networks, analyzing robustness of networks, and searching databases for components that meet the design criteria. At the current state of synthetic biology, there are no established methods for measuring robustness or identifying components that fit a design. The same is true for databases of biological parts. TinkerCell's flexible modeling framework allows it to cope with changes in the field. Such changes may involve the way parts are characterized or the way synthetic networks are modeled and analyzed computationally. TinkerCell can readily accept third-party algorithms, allowing it to serve as a platform for testing different methods relevant to synthetic biology. PMID:19874625

The influence of aortic valve calcification on the risk of periprocedural myocardial injury after elective coronary intervention.

PubMed

Chen, Zhang-Wei; Yang, Hong-Bo; Chen, Ying-Hua; Qian, Ju-Ying; Shu, Xian-Hong; Ge, Jun-Bo

2015-10-01

Aortic valve calcification (AVC) is a common progressive condition that involves several inflammatory and atherosclerotic mediators. However, it is unclear whether the occurrence of periprocedural myocardial injury (PMI) after elective coronary intervention is associated with AVC in stable coronary artery disease (CAD) patients. A total of 530 stable CAD patients who underwent elective coronary intervention were enrolled in this clinical study. High sensitive cardiac troponin T (hs-cTnT) was detected before and after the procedure. PMI was defined as hs-cTnT after coronary intervention higher than 99th percentile upper reference limit (URL). All patients underwent echocardiography to detect the occurrence of AVC. Univariate and multivariate analyses were applied to analyze risk factors of PMI. A total of 210 patients (39.6 %) were diagnosed with PMI after elective coronary intervention. Compared with non-AVC patients (n = 386), AVC patients (n = 144) had higher rate of PMI (64.6 vs. 30.3 %, P < 0.01). CAD patients with AVC had higher Gensini score (39.9 ± 26.6 vs. 34.2 ± 22.1, P < 0.05) and more number of implanted stents (1.7 ± 0.8 vs. 1.5 ± 0.7, P < 0.05). After stratification by classic risk factors of CAD (such as age, male gender and diabetes) in subgroup analyses, we found that AVC patients had increased risk of PMI compared with non-AVC patients. Importantly, even after being adjusted by multivariate analysis, AVC still independently increased the risk of PMI (OR = 3.329, 95 % CI = 2.087-5.308, P < 0.01). AVC significantly increased the risk of PMI after elective coronary intervention. It could be one of the independent predictors for PMI in stable CAD patients.

Systems Genetics Analysis of GWAS reveals Novel Associations between Key Biological Processes and Coronary Artery Disease

PubMed Central

Ghosh, Sujoy; Vivar, Juan; Nelson, Christopher P; Willenborg, Christina; Segrè, Ayellet V; Mäkinen, Ville-Petteri; Nikpay, Majid; Erdmann, Jeannette; Blankenberg, Stefan; O'Donnell, Christopher; März, Winfried; Laaksonen, Reijo; Stewart, Alexandre FR; Epstein, Stephen E; Shah, Svati H; Granger, Christopher B; Hazen, Stanley L; Kathiresan, Sekar; Reilly, Muredach P; Yang, Xia; Quertermous, Thomas; Samani, Nilesh J; Schunkert, Heribert; Assimes, Themistocles L; McPherson, Ruth

2016-01-01

Objective Genome-wide association (GWA) studies have identified multiple genetic variants affecting the risk of coronary artery disease (CAD). However, individually these explain only a small fraction of the heritability of CAD and for most, the causal biological mechanisms remain unclear. We sought to obtain further insights into potential causal processes of CAD by integrating large-scale GWA data with expertly curated databases of core human pathways and functional networks. Approaches and Results Employing pathways (gene sets) from Reactome, we carried out a two-stage gene set enrichment analysis strategy. From a meta-analyzed discovery cohort of 7 CADGWAS data sets (9,889 cases/11,089 controls), nominally significant gene-sets were tested for replication in a meta-analysis of 9 additional studies (15,502 cases/55,730 controls) from the CARDIoGRAM Consortium. A total of 32 of 639 Reactome pathways tested showed convincing association with CAD (replication p<0.05). These pathways resided in 9 of 21 core biological processes represented in Reactome, and included pathways relevant to extracellular matrix integrity, innate immunity, axon guidance, and signaling by PDRF, NOTCH, and the TGF-β/SMAD receptor complex. Many of these pathways had strengths of association comparable to those observed in lipid transport pathways. Network analysis of unique genes within the replicated pathways further revealed several interconnected functional and topologically interacting modules representing novel associations (e.g. semaphorin regulated axonal guidance pathway) besides confirming known processes (lipid metabolism). The connectivity in the observed networks was statistically significant compared to random networks (p<0.001). Network centrality analysis (‘degree’ and ‘betweenness’) further identified genes (e.g. NCAM1, FYN, FURIN etc.) likely to play critical roles in the maintenance and functioning of several of the replicated pathways. Conclusions These findings provide novel insights into how genetic variation, interpreted in the context of biological processes and functional interactions among genes, may help define the genetic architecture of CAD. PMID:25977570

Quantifying alcohol-related emergency admissions in a UK tertiary referral hospital: a cross-sectional study of chronic alcohol dependency and acute alcohol intoxication

PubMed Central

Vardy, J; Keliher, T; Fisher, J; Ritchie, F; Bell, C; Chekroud, M; Clarey, F; Blackwood, L; Barry, L; Paton, E; Clark, A; Connelly, R

2016-01-01

Objectives Alcohol is responsible for a proportion of emergency admissions to hospital, with acute alcohol intoxication and chronic alcohol dependency (CAD) implicated. This study aims to quantify the proportion of hospital admissions through our emergency department (ED) which were thought by the admitting doctor to be (largely or partially) a result of alcohol consumption. Setting ED of a UK tertiary referral hospital. Participants All ED admissions occurring over 14 weeks from 1 September to 8 December 2012. Data obtained for 5497 of 5746 admissions (95.67%). Primary outcome measures Proportion of emergency admissions related to alcohol as defined by the admitting ED clinician. Secondary outcome measures Proportion of emergency admissions due to alcohol diagnosed with acute alcohol intoxication or CAD according to ICD-10 criteria. Results 1152 (21.0%, 95% CI 19.9% to 22.0%) of emergency admissions were thought to be due to alcohol. 74.6% of patients admitted due to alcohol had CAD, and significantly greater than the 26.4% with ‘Severe’ or ‘Very Severe’ acute alcohol intoxication (p<0.001). Admissions due to alcohol differed to admissions not due to alcohol being on average younger (45 vs 56 years, p<0.001) more often male (73.4% vs 45.1% males, p<0.001) and more likely to have a diagnosis synonymous with alcohol or related to recreational drug use, pancreatitis, deliberate self-harm, head injury, gastritis, suicidal ideation, upper gastrointestinal bleeds or seizures (p<0.001). An increase in admissions due to alcohol on Saturdays reflects a surge in admissions with acute alcohol intoxication above the weekly average (p=0.003). Conclusions Alcohol was thought to be implicated in 21% of emergency admissions in this cohort. CAD is responsible for a significantly greater proportion of admissions due to alcohol than acute intoxication. Interventions designed to reduce alcohol-related admissions must incorporate measures to tackle CAD. PMID:27324707

Simultaneous Genotyping of the rs4762 and rs699 Polymorphisms in Angiotensinogen Gene and Correlation with Iranian CAD Patients with Novel Hexa-primer ARMS-PCR

PubMed Central

KHATAMI, Mehri; HEIDARI, Mohammad Mehdi; HADADZADEH, Mehdi; SCHEIBER-MOJDEHKAR, Barbara; BITARAF SANI, Morteza; HOUSHMAND, Massoud

2017-01-01

Background: A significant role of Renin-angiotensin system (RAS) genetic variants in the pathogenesis of essential hypertension and cardiovascular diseases has been proved. This study aimed to develop a new, fast and cheap method for the simultaneous detection of two missense single nucleotide polymorphisms (T207M or rs4762 and M268T orrs699) of angiotensinogen (AGT) in single-step Multiplex Hexa-Primer Amplification Refractory Mutation System - polymerase chain reaction (H-ARMS-PCR). Methods: In this case-control study, 148 patients with coronary artery disease (CAD) and 135 controls were included. The patients were referred to cardiac centers in Afshar Hospital (Yazd, Iran) from 2012 to 2015. Two sets of inner primer (for each SNP) and one set outer primer pairs were designed for genotyping of rs4762 and rs699 in single tube H-ARMS-PCR. Direct sequencing of all samples was also performed to assess the accuracy of this method. DNA sequencing method validated the results of single tube H-ARMS-PCR. Results: We found full accordance for genotype adscription by sequencing method. The frequency of the AGT T521 and C702 alleles was significantly higher in CAD patients than in the control group (OR: 0.551, 95% CI: 0.359–0.846, P=0.008 and OR: 0.629, 95% CI: 0.422–0.936, P=0.028, respectively). Conclusion: This is the first work describing a rapid, low-cost, high-throughput simultaneous detection of rs4762 and rs699 polymorphisms in AGT gene, used in large clinical studies. PMID:28828324

The Risk of Stroke in Physicians: A Population-based Cohort Study in Taiwan.

PubMed

Tam, Hon-Pheng; Lin, Hung-Jung; Weng, Shih-Feng; Hsu, Chien-Chin; Wang, Jhi-Joung; Su, Shih-Bin; Huang, Chien-Cheng; Guo, How-Ran

2017-10-01

Physicians in Taiwan work in stressful workplaces and have heavy workloads, both of which may contribute to the occurrence of a stroke. However, it is not clear whether they have a higher risk of stroke. Therefore, we conducted a population-based cohort study to compare the risks of stroke between physicians and the general population and among subgroups of physicians in Taiwan. In the National Health Insurance Research Database of Taiwan, we identified 28,062 physicians and selected 84,186 age- and sex-matched nonmedical staff beneficiaries as the references. Using conditional logistic regression, we compared the prevalence of stroke between physicians and references. In addition, we made comparisons among subgroup of physicians defined by age, sex, comorbidity, specialty, and the level of hospital. During the study period, physicians had higher prevalence rates of hypertension (23.6% vs. 19.1%), hyperlipidemia (21.4% vs. 12.9%), and coronary artery disease (CAD) (6.4% vs. 5.7%) than the referent group, but they had a lower risk of stroke with an odds ratio of 0.61 (95% confidence interval = 0.55, 0.66) after adjusting for hypertension, diabetes, hyperlipidemia, CAD, and active worker. Among physicians, the risks were higher in those who were older or had hypertension, diabetes, hyperlipidemia, or CAD. Despite having higher prevalence rates of hypertension, hyperlipidemia, and CAD and working in stressful workplaces with heavy workloads, our study suggests that physicians in Taiwan have a lower risk of stroke compared with the general population. These results may indicate the benefits of higher awareness and more knowledge of diseases.

Prognostic Value of Negative Coronary CT Angiography in Severely Obese Patients Prior to Bariatric Surgery: a Follow-Up After 6 Years.

PubMed

Messerli, Michael; Maywald, Céline; Wälti, Stephan; Warschkow, René; Wildermuth, Simon; Alkadhi, Hatem; Leschka, Sebastian; Schiesser, Marc

2017-08-01

This study aims to determine the long-term prognostic value of coronary CT angiography (CCTA) prior to bariatric surgery in severely obese patients with a body mass index (BMI) ≥35 kg/m 2 . Seventy consecutive patients undergoing cardiac CT for coronary assessment prior to bariatric surgery were prospectively included. Images were analysed for the presence of coronary calcification and for non-obstructive (<50%) or obstructive (>50% stenosis) coronary artery disease (CAD). A median clinical follow-up of 6.1 years in 54 patients was obtained for major adverse cardiovascular events (MACEs), defined as death, non-fatal myocardial infarction or coronary revascularisation. Weight loss and BMI decrease following bariatric surgery were recorded. The median BMI prior to surgery was 46.9 kg/m 2 . The median percentage of excess BMI loss after surgery was 75%. CT showed coronary calcification in 26 (48%) patients, whereas 28 (52%) patients had no calcification. CCTA revealed normal coronaries in 47 (87%) and non-obstructive CAD in 7 (13%) patients. No obstructive CAD was found. All patients successfully underwent bariatric surgery, and no MACE occurred neither perioperatively nor in the follow-up period. The negative predictive value of CCTA was 100% (95% confidence interval of 90.1-100.0%). In severely obese patients, the absence of obstructive CAD in cardiac CT prior to bariatric surgery with subsequently marked weight reduction has strong long-term prognostic implications for ruling out major adverse cardiac events in the postoperative period.

When and why might a Computer Aided Detection (CAD) system interfere with visual search? An eye-tracking study

PubMed Central

Drew, Trafton; Cunningham, Corbin; Wolfe, Jeremy

2012-01-01

Rational and Objectives Computer Aided Detection (CAD) systems are intended to improve performance. This study investigates how CAD might actually interfere with a visual search task. This is a laboratory study with implications for clinical use of CAD. Methods 47 naïve observers in two studies were asked to search for a target, embedded in 1/f2.4 noise while we monitored their eye-movements. For some observers, a CAD system marked 75% of targets and 10% of distractors while other observers completed the study without CAD. In Experiment 1, the CAD system’s primary function was to tell observers where the target might be. In Experiment 2, CAD provided information about target identity. Results In Experiment 1, there was a significant enhancement of observer sensitivity in the presence of CAD (t(22)=4.74, p<.001), but there was also a substantial cost. Targets that were not marked by the CAD system were missed more frequently than equivalent targets in No CAD blocks of the experiment (t(22)=7.02, p<.001). Experiment 2 showed no behavioral benefit from CAD, but also no significant cost on sensitivity to unmarked targets (t(22)=0.6, p=n.s.). Finally, in both experiments, CAD produced reliable changes in eye-movements: CAD observers examined a lower total percentage of the search area than the No CAD observers (Ex 1: t(48)=3.05, p<.005; Ex 2: t(50)=7.31, p<.001). Conclusions CAD signals do not combine with observers’ unaided performance in a straight-forward manner. CAD can engender a sense of certainty that can lead to incomplete search and elevated chances of missing unmarked stimuli. PMID:22958720

Coronary artery endothelial dysfunction is present in HIV positive individuals without significant coronary artery disease

PubMed Central

IANTORNO, Micaela; SCHÄR, Michael; SOLEIMANIFARD, Sahar; BROWN, Todd T.; MOORE, Richard; BARDITCH-CROVO, Patricia; STUBER, Matthias; LAI, Shenghan; GERSTENBLITH, Gary; WEISS, Robert G.; HAYS, Allison G.

2017-01-01

Objective HIV+ individuals experience an increased burden of coronary artery disease (CAD) not adequately accounted for by traditional CAD risk factors. Coronary endothelial function (CEF), a barometer of vascular health, is depressed early in atherosclerosis and predicts future events but has not been studied in HIV+ individuals. We tested whether CEF is impaired in HIV+ subjects without CAD as compared to an HIV- population matched for cardiac risk factors. Design/Methods In this observational study, CEF was measured noninvasively by quantifying isometric handgrip exercise (IHE)-induced changes in coronary vasoreactivity with MRI in 18 participants with HIV but no CAD (HIV+CAD-, based on prior imaging), 36 age- and cardiac risk factor-matched healthy participants with neither HIV nor CAD (HIV-CAD-), 41 subjects with no HIV but with known CAD (HIV-CAD+) and 17 subjects with both HIV and CAD (HIV+CAD+). Results CEF was significantly depressed in HIV+CAD- subjects as compared to that of risk-factor-matched HIV-CAD- subjects (p<0.0001), and was depressed to the level of that in HIV- participants with established CAD. Mean IL-6 levels were higher in HIV+ participants (p<0.0001), and inversely related to CEF in the HIV+ subjects (p=0.007). Conclusions Marked coronary endothelial dysfunction is present in HIV+ subjects without significant CAD and is as severe as that in clinical CAD patients. Furthermore, endothelial dysfunction appears inversely related to the degree of inflammation in HIV+ subjects, as measured by IL-6. CEF testing in HIV+ patients may be useful for assessing cardiovascular risk and testing new CAD treatment strategies, including those targeting inflammation. PMID:28353539

Association of apolipoprotein E polymorphism with myocardial infarction in Greek patients with coronary artery disease.

PubMed

Kolovou, Genovefa; Yiannakouris, Nikos; Hatzivassiliou, Marilena; Malakos, John; Daskalova, Deliana; Hatzigeorgiou, George; Cariolou, Marios A; Cokkinos, Dennis V

2002-01-01

Studies in several populations have indicated that genetic variation at the apolipoprotein E (apoE) structural locus influences the risk of coronary artery disease (CAD) and myocardial infarction (MI). This study aimed at investigating whether apoE polymorphism has an allelic and/or genotypic impact on the risk of MI in Greek patients with CAD. We compared apoE gene polymorphism in a group of patients with angiographically confirmed CAD but not MI [CAD/MI (-)-group, n = 143] and a group of age and sex-matched CAD patients who had experienced a non-fatal Ml [CAD/MI (+)-group, n = 124]. The patients were also compared with a group of healthy younger individuals (n = 240) with no family history of CAD. The apoE genotype distribution differed significantly between the two groups of CAD patients (p = 0.02). The epsilon2 allele was 5.3-fold less frequent in the CAD/ MI (+)-group compared with the CAD/MI (-)-group (1.2% vs. 6.3%, p = 0.01). The frequency of the epsilon2 allele in healthy subjects was 8.1%, which is 6.8-fold higher than in CAD/MI (+)-patients (p = 0.001) and twice as high compared with all CAD patients (p = 0.02). No differences in epsilon4 allele frequencies were observed between CAD/MI (+)- and CAD/MI (-)-patients (10.9% vs. 9.8%), or between patients with CAD and healthy subjects (10.3% vs. 10.2%). In summary, the epsilon4 allele was not found to be associated with an increased risk for CAD or MI. In contrast, a negative association of the epsilon2 allele with Ml was observed among Greek patients with CAD.

CAD-RADS - a new clinical decision support tool for coronary computed tomography angiography.

PubMed

Foldyna, Borek; Szilveszter, Bálint; Scholtz, Jan-Erik; Banerji, Dahlia; Maurovich-Horvat, Pál; Hoffmann, Udo

2018-04-01

Coronary computed tomography angiography (CTA) has been established as an accurate method to non-invasively assess coronary artery disease (CAD). The proposed 'Coronary Artery Disease Reporting and Data System' (CAD-RADS) may enable standardised reporting of the broad spectrum of coronary CTA findings related to the presence, extent and composition of coronary atherosclerosis. The CAD-RADS classification is a comprehensive tool for summarising findings on a per-patient-basis dependent on the highest-grade coronary artery lesion, ranging from CAD-RADS 0 (absence of CAD) to CAD-RADS 5 (total occlusion of a coronary artery). In addition, it provides suggestions for clinical management for each classification, including further testing and therapeutic options. Despite some limitations, CAD-RADS may facilitate improved communication between imagers and patient caregivers. As such, CAD-RADS may enable a more efficient use of coronary CTA leading to more accurate utilisation of invasive coronary angiograms. Furthermore, widespread use of CAD-RADS may facilitate registry-based research of diagnostic and prognostic aspects of CTA. • CAD-RADS is a tool for standardising coronary CTA reports. • CAD-RADS includes clinical treatment recommendations based on CTA findings. • CAD-RADS has the potential to reduce variability of CTA reports.

Degradation of Multimode Adhesive System Bond Strength to Artificial Caries-Affected Dentin Due to Water Storage.

PubMed

Follak, A C; Miotti, L L; Lenzi, T L; Rocha, R O; Soares, F Z

The purpose of this study was to evaluate the influence of water storage on bond strength of multimode adhesive systems to artificially induced caries-affected dentin. One hundred twelve sound bovine incisors were randomly assigned to 16 groups (n=7) according to the dentin condition (sound; SND, artificially induced caries-affected dentin; CAD, cariogenic challenge by pH cycling for 14 days); the adhesive system (SU, Scotchbond Universal Adhesive; AB, All-Bond Universal; PB, Prime & Bond Elect; SB, Adper Single Bond 2; and CS, Clearfil SE Bond), and the etching strategy (etch-and-rinse and self-etch). All adhesive systems were applied under manufacturer's instructions to flat dentin surfaces, and a composite block was built up on each dentin surface. After 24 hours of water storage, the specimens were sectioned into stick-shaped specimens (0.8 mm 2 ) and submitted to a microtensile test immediately (24 hours) or after six months of water storage. Bond strength data (MPa) were analyzed using three-way repeated-measures analysis of variance and post hoc Tukey test (α=5%), considering each substrate separately (SND and CAD). The etching strategy did not influence the bond strength of multimode adhesives, irrespective of the dentin condition. Water storage only reduced significantly the bond strength to CAD. The degradation of bond strength due to water storage was more pronounced in CAD, regardless of the etching strategy.

Analytical Stability-Indicating Methods for Alogliptin in Tablets by LC-CAD and LC-UV.

PubMed

Bertol, Charise Dallazem; Friedrich, Maria Tereza; Carlos, Graciela; Froehlich, Pedro Eduardo

2017-03-01

Stability-indicating LC methods using a UV detector and a charged aerosol detector (CAD) simultaneously were validated for the assessment of alogliptin (ALG) in tablets. The analysis was performed on a C8 column (250 × 4.6 mm, 5 μm) at a flow of 0.8 mL/min, using acetonitrile-10 mM ammonium acetate buffer (pH 3.5; 90 + 10, v/v) as mobile phase and UV detection at 275 nm. Validation followed the International Conference on Harmonization guidelines. The method was linear over the range of 25-200 μg/mL. Normality of the residuals showed a normal distribution, no autocorrelation, and homoscedasticity. LODs were 6.25 and 2.65 µg/mL and LOQs were 20.85 and 8.84 µg/mL for the CAD and the UV detector, respectively. The methods were precise and accurate. Excipients and degradation products did not interfere in the methods in studies of specificity. None of the factors studied in the analysis of robustness had a significant effect on the quantification of the ALG by the Pareto chart. The results of the assay obtained with LC-CAD and LC-UV were similar. The methods could be considered interchangeable and stability-indicating, and can be applied as an appropriate QC tool for analysis of ALG in tablets.

The Prognostic Effects of Coronary Disease Severity and Completeness of Revascularization on Mortality in Patients Undergoing Transcatheter Aortic Valve Replacement.

PubMed

Witberg, Guy; Regev, Ehud; Chen, Shmuel; Assali, Abbid; Barbash, Israel M; Planer, David; Vaknin-Assa, Hana; Guetta, Victor; Vukasinovic, Vojislav; Orvin, Katia; Danenberg, Haim D; Segev, Amit; Kornowski, Ran

2017-07-24

The study sought to examine the effect of coronary artery disease (CAD) on mortality in patients undergoing transcatheter aortic valve replacement (TAVR). CAD is common in the TAVR population. However, there are conflicting data on the prognostic significance of CAD and its treatment in this population. The authors analyzed 1,270 consecutive patients with severe aortic stenosis (AS) undergoing TAVR at 3 Israeli centers. They investigated the association of CAD severity (no CAD, nonsevere CAD [i.e., SYNTAX score (SS) <22], severe CAD [SS >22]) and revascularization completeness ("reasonable" incomplete revascularization [ICR] [i.e., residual SS <8]; ICR [residual SS >8]) with all-cause mortality following TAVR using a Cox proportional hazards ratio model adjusted for multiple prognostic variables. Of the 1,270 patients, 817 (64%) had no CAD, 331 (26%) had nonsevere CAD, and 122 (10%) had severe CAD. Over a median follow-up of 1.9 years, 311 (24.5%) patients died. Mortality was higher in the severe CAD and the ICR groups, but not in the nonsevere CAD or "reasonable" ICR groups, versus no CAD. After multivariate adjustment, both severe CAD (hazard ratio: 2.091; p = 0.017) and ICR (hazard ratio: 1.720; p = 0.031) were associated with increased mortality. Only severe CAD was associated with increased mortality post-TAVR. More complete revascularization pre-TAVR may attenuate the association of severe CAD and mortality. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Calibration between the Estimated Probability of the Risk Assessment Chart of Japan Atherosclerosis Society and Actual Mortality Using External Population: Evidence for Cardiovascular Prevention from Observational Cohorts in Japan (EPOCH-JAPAN).

PubMed

Nakai, Michikazu; Miyamoto, Yoshihiro; Higashiyama, Aya; Murakami, Yoshitaka; Nishimura, Kunihiro; Yatsuya, Hiroshi; Saitoh, Shigeyuki; Sakata, Kiyomi; Iso, Hiroyasu; Miura, Katsuyuki; Ueshima, Hirotsugu; Okamura, Tomonori

2016-01-01

In Japan Atherosclerosis Society guidelines for the prevention of atherosclerotic cardiovascular diseases 2012 (JAS2012), NIPPON DATA80 risk assessment chart (ND80RAC) was adopted to estimate the 10-year probability of coronary artery disease (CAD) mortality. However, there was no comparison between the estimated mortality calculated by ND80RAC and actual mortality in external populations. Accordingly, we used the large pooled database of cohorts in Japan, EPOCH-JAPAN, as an external population. The participants of EPOCH-JAPAN without a history of cardiovascular disease (15,091 men and 18,589 women aged 40-74 years) were analyzed based on sex. The probability of a 10-year risk of CAD/stroke mortality was estimated by ND80RAC. The participants were divided into both decile of their estimated mortality and three categories according to JAS2012. The calibration between the mean estimated mortality and the actual mortality was performed by the Hosmer and Lemeshow (H-L) test. In both sexes, the estimated CAD mortality was higher than the actual mortality, particularly in higher deciles of estimated mortality, and the estimated stroke mortality was almost concordant with the actual mortality in low/moderate deciles of estimated mortality. As for the categories according to JAS2012, the estimated CAD mortality was higher than the actual mortality in both sexes; actual mortality in Category III was lower than that in Category II in women. However, it increased in the ascending order of category when we excluded the presence of diabetes from Category III. The estimated CAD mortality by ND80RAC tended to be higher than the actual mortality in the population in which the baseline survey was more recently performed.

Association between platelet P2Y12 haplotype and risk of cardiovascular events in chronic coronary disease.

PubMed

Schettert, Isolmar T; Pereira, Alexandre C; Lopes, Neuza H; Hueb, Whady A; Krieger, Jose E

2006-01-01

A positive association was recently described between P2Y12 platelet receptor H1 and H2 haplotypes and peripheral artery disease. We tested the described P2Y12 receptor haplotypes in a group of patients with coronary artery disease. The P2Y12 platelet receptor H1 and H2 haplotypes was tested in a group of 540 patients enrolled in the Medical, Angioplasty, or Surgery Study II (MASS II), a randomized trial comparing treatments for patients with coronary artery disease (CAD) and preserved left ventricular function. After a 3-year follow-up period, the incidence of the composite end point of cardiac death, myocardial infarction, and refractory angina requiring revascularization was determined in the H1/H1, H1/H2 and H2/H2 haplotype groups. We used Student's t-test and the chi-square test to analyze the differences among groups and Kaplan-Meier method to calculate survival curves. Risk was assessed with the use of a Cox proportional-hazards model. The frequency of haplotypes among studied patients were 410 (75.9%) H1/H1, 119 (22.0%) H1/H2 and 11 (2.1%) H2/H2. The baseline clinical characteristics, mean clinical follow-up time and received treatment of each genotype group were similar. We did not disclose any association between haplotype groups regarding the incidence of any of the studied cardiovascular end-points. This is the first report studying the association of P2Y12 platelet receptor H1 and H2 haplotype and cardiovascular events. Our findings do not provide evidence for a strong association between H1/H1 and H1/H2 haplotypes and a increased risk of cardiovascular events in a population with CAD. Future works should address the role of the H2/H2 haplotype as a genetic marker for cardiovascular events.

Opportunities and limitations for intersection collision intervention-A study of real world 'left turn across path' accidents.

PubMed

Sander, Ulrich

2017-02-01

Turning across the path of oncoming vehicle accidents are frequent and dangerous. To date not many car manufacturers have introduced Automated Emergency Braking (AEB) systems addressing this type of conflict situation, but it is foreseeable that these scenarios will be part of the Euro NCAP 2020 rating. Nine out of ten collisions are caused by the driver of the turning vehicle. An AEB system evaluating the ego and conflict vehicle driver's possibilities to avoid a pending crash by either braking or steering was specified for application in various constellations of vehicle collisions. In virtual simulation, AEB system parameters were varied, covering parameters that are relevant for driver comfort such as longitudinal and lateral acceleration (to define avoidance possibilities), expected steering maneuvers to avoid conflict, and intervention response characteristics (brake delay and ramp up) to assess the safety benefit. The reference simulation showed a potential of the AEB system in the turning vehicle to avoid approximately half of the collisions. An AEB system of the straight going vehicle was less effective. The effectiveness of the turning vehicle's AEB system increases if spatial limitations for the collision-avoidance steering maneuver are known. Such information could be provided by sensors detecting free space in or around the road environment or geographical information shared via vehicle to cloud communication. AEB interventions rarely result in collision avoidance for turning vehicles with speeds above 40km/h or for straight going vehicles with speeds above 60km/h. State of the art field-of-views of forward looking sensing systems designed for AEB rear-end interventions are capable of addressing turning across path situations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hepatic cells derived from human skin progenitors show a typical phospholipidotic response upon exposure to amiodarone.

PubMed

Natale, Alessandra; Boeckmans, Joost; Desmae, Terry; De Boe, Veerle; De Kock, Joery; Vanhaecke, Tamara; Rogiers, Vera; Rodrigues, Robim M

2018-03-01

Phospholipidosis is a metabolic disorder characterized by intracellular accumulation of phospholipids. It can be caused by short-term or chronic exposure to cationic amphiphilic drugs (CADs). These compounds bind to phospholipids, leading to inhibition of their degradation and consequently to their accumulation in lysosomes. Drug-induced phospholipidosis (DIPL) is frequently at the basis of discontinuation of drug development and post-market drug withdrawal. Therefore, reliable human-relevant in vitro models must be developed to speed up the identification of compounds that are potential inducers of phospholipidosis. Here, hepatic cells derived from human skin (hSKP-HPC) were evaluated as an in vitro model for DIPL. These cells were exposed over time to amiodarone, a CAD known to induce phospholipidosis in humans. Transmission electron microscopy revealed the formation of the typical lamellar inclusions in the cell cytoplasm. Increase of phospholipids was already detected after 24 h exposure to amiodarone, whereas a significant increase of neutral lipid vesicles could be observed after 72 h. At the transcriptional level, the modulation of genes involved in DIPL was detected. These results provide a valuable indication of the applicability of hSKP-HPC for the quick assessment of drug-induced phospholipidosis in vitro, early in the drug development process. Copyright © 2017 Elsevier B.V. All rights reserved.

What we can say: disease illiteracy.

PubMed

Beniwal, Sunil; Sharma, Bharat Bhushan; Singh, Virendra

2011-06-01

To study the awareness, attitude and behavior of patients with chronic disease in those who come for follow-up, about nature of their disease, compliance to drugs and precautions. Patients attending medical outdoor with a prescription documents (discharge cards, pensioner diary, prescription letter etc.) bearing diagnosis of the chronic disease in question based on standard criteria were studied for a period of six month. Patient with chronic disease completed a questionnaire containing questions about nature of disease, important precautions and compliance to the treatment. Of the 63 coronary artery disease (CAD) patients 27 (42.8%) were not aware of having heart disease ever in the life. Twenty nine (44%) CAD patients noncompliant for medicines during last one month. Among 84 hypertensive patients only 58 (69%) knew they had hypertension and 54 (64.2%) compliant with medicine. Only 40 (47.6 %) out of 84 avoided salt in food. Though, out of 36 diabetic patients 34 (94.4%) percent knew they had diabetes, still 19 (52.7%) stopped medicine during last month. Among 29 chronic obstructive pulmonary disease (COPD) patients only 6 (20.6%) knew they had COPD and another 17(58.6%) knew they had respiratory problem. Only 5 (17.2%) COPD patients remembered the no-smoking advice. Out of 23 CVA patients 17 (74%) knew that they have paralysis and 8 (34.7%) stopped medication during last month. It is concluded that majority of patients were ignorant about their disease, importance of compliance to medicines and about precautions of the disease. CAD patients were most ignorant people among chronic patients. It emphasizes the need of proper patient education

A new computer aided diagnosis system for evaluation of chronic liver disease with ultrasound shear wave elastography imaging.

PubMed

Gatos, Ilias; Tsantis, Stavros; Spiliopoulos, Stavros; Karnabatidis, Dimitris; Theotokas, Ioannis; Zoumpoulis, Pavlos; Loupas, Thanasis; Hazle, John D; Kagadis, George C

2016-03-01

Classify chronic liver disease (CLD) from ultrasound shear-wave elastography (SWE) imaging by means of a computer aided diagnosis (CAD) system. The proposed algorithm employs an inverse mapping technique (red-green-blue to stiffness) to quantify 85 SWE images (54 healthy and 31 with CLD). Texture analysis is then applied involving the automatic calculation of 330 first and second order textural features from every transformed stiffness value map to determine functional features that characterize liver elasticity and describe liver condition for all available stages. Consequently, a stepwise regression analysis feature selection procedure is utilized toward a reduced feature subset that is fed into the support vector machines (SVMs) classification algorithm in the design of the CAD system. With regard to the mapping procedure accuracy, the stiffness map values had an average difference of 0.01 ± 0.001 kPa compared to the quantification results derived from the color-box provided by the built-in software of the ultrasound system. Highest classification accuracy from the SVM model was 87.0% with sensitivity and specificity values of 83.3% and 89.1%, respectively. Receiver operating characteristic curves analysis gave an area under the curve value of 0.85 with [0.77-0.89] confidence interval. The proposed CAD system employing color to stiffness mapping and classification algorithms offered superior results, comparing the already published clinical studies. It could prove to be of value to physicians improving the diagnostic accuracy of CLD and can be employed as a second opinion tool for avoiding unnecessary invasive procedures.

RESEARCH AND DESIGN ABOUT VERSATILE 3D-CAD ENGINE FOR CONSTRUCTION

NASA Astrophysics Data System (ADS)

Tanaka, Shigenori; Kubota, Satoshi; Kitagawa, Etsuji; Monobe, Kantaro; Nakamura, Kenji

In the construction field of Japan, it is an important subject to build the environment where 3D-CAD data is used for CALS/EC, information construction, and an improvement in productivity. However, in the construction field, 3D-CAD software does not exist under the present circumstances. Then, in order to support development of domestic 3D-CAD software, it is required to develop a 3D-CAD engine. In this research, in order to familiarize the 3D-CAD software at low cost and quickly and build the environment where the 3D-CAD software is utilizable, investigation for designing a 3D-CAD engine is proposed. The target for investigation are the use scene of 3D-CAD, the seeds which accompany 3D-CAD, a standardization trend, existing products, IT component engineering. Based on results of the investigation, the functional requirements for the 3D-CAD engine for the construction field were concluded.

Excretion of anti-angiogenic proteins in patients with chronic allograft dysfunction.

PubMed

Moskowitz-Kassai, Eliza; Mackelaite, Lina; Chen, Jun; Patel, Kaushal; Dadhania, Darshana M; Gross, Steven S; Chander, Praveen; Delaney, Vera; Deng, Luqin; Chen, Ligong; Cui, Xiangqin; Suthanthiran, Manikkam; Goligorsky, Michael S

2012-02-01

We have recently documented the appearance of an anti-angiogenic peptide, endorepellin, in the urine of patients with chronic allograft dysfunction (CAD). Here, we analyzed using enzyme-linked immunosorbent assay the excretion of anti-angiogenic peptides endostatin, pigment epithelium-derived factor (PEDF) and Kruppel-like factor-2 (KLF-2), in healthy individuals, patients with stable graft function and patients with various degrees of CAD. In healthy subjects and patients with CAD-0, endostatin, PEDF and KLF-2 excretions were at the level of detection. In contrast, there were significant differences between the patients with CAD-3 and CAD-0, CAD-1 and healthy controls for endostatin and CAD-0 versus CAD-3 for PEDF, but no differences in KLF-2 excretion. Receiver operating characteristic (ROC) curve analyses demonstrated a highly discriminative profile for all three biomarkers: the combination of these parameters offered 83% sensitivity and 90% specificity in distinguishing CAD-0 from CAD-1-3. The quality of these potential biomarkers of CAD was, however, highest in discriminating CAD status in biopsy-proven cases and dropped when CAD-0 was diagnosed based on clinical criteria. In conclusion, these findings indicate the diagnostic potential of urinary detection of endostatin, PEDF and to lesser degree KLF-2 and suggest a mechanistic role played by anti-angiogenic substances in the developing vasculopathy and vascular rarefaction in patients with CAD.

Navigational choice between reversal and curve during acidic pH avoidance behavior in Caenorhabditis elegans.

PubMed

Wakabayashi, Tokumitsu; Sakata, Kazumi; Togashi, Takuya; Itoi, Hiroaki; Shinohe, Sayaka; Watanabe, Miwa; Shingai, Ryuzo

2015-11-19

Under experimental conditions, virtually all behaviors of Caenorhabditis elegans are achieved by combinations of simple locomotion, including forward, reversal movement, turning by deep body bending, and gradual shallow turning. To study how worms regulate these locomotion in response to sensory information, acidic pH avoidance behavior was analyzed by using worm tracking system. In the acidic pH avoidance, we characterized two types of behavioral maneuvers that have similar behavioral sequences in chemotaxis and thermotaxis. A stereotypic reversal-turn-forward sequence of reversal avoidance caused an abrupt random reorientation, and a shallow gradual turn in curve avoidance caused non-random reorientation in a less acidic direction to avoid the acidic pH. Our results suggest that these two maneuvers were each triggered by a distinct threshold pH. A simulation study using the two-distinct-threshold model reproduced the avoidance behavior of the real worm, supporting the presence of the threshold. Threshold pH for both reversal and curve avoidance was altered in mutants with reduced or enhanced glutamatergic signaling from acid-sensing neurons. C. elegans employ two behavioral maneuvers, reversal (klinokinesis) and curve (klinotaxis) to avoid acidic pH. Unlike the chemotaxis in C. elegans, reversal and curve avoidances were triggered by absolute pH rather than temporal derivative of stimulus concentration in this behavior. The pH threshold is different between reversal and curve avoidance. Mutant studies suggested that the difference results from a differential amount of glutamate released from ASH and ASK chemosensory neurons.

BladeCAD: An Interactive Geometric Design Tool for Turbomachinery Blades

NASA Technical Reports Server (NTRS)

Miller, Perry L., IV; Oliver, James H.; Miller, David P.; Tweedt, Daniel L.

1996-01-01

A new metthodology for interactive design of turbomachinery blades is presented. Software implementation of the meth- ods provides a user interface that is intuitive to aero-designers while operating with standardized geometric forms. The primary contribution is that blade sections may be defined with respect to general surfaces of revolution which may be defined to represent the path of fluid flow through the turbomachine. The completed blade design is represented as a non-uniform rational B-spline (NURBS) surface and is written to a standard IGES file which is portable to most design, analysis, and manufacturing applications.

Cigarette smoke disrupts the integrity of airway adherens junctions through the aberrant interaction of p120-catenin with the cytoplasmic tail of MUC1

PubMed Central

Zhang, Lili; Gallup, Marianne; Zlock, Lorna; Basbaum, Carol; Finkbeiner, Walter E.; McNamara, Nancy A.

2014-01-01

Adherens junctions (AJs) containing epithelial cadherin (E-cad) bound to p120-catenin (p120ctn) and β-catenin (β-ctn) play a crucial role in regulating cell–cell adhesion. Cigarette smoke abrogates cell–cell adhesion between epithelial cells by disrupting E-cad, a hallmark of epithelial–mesenchymal transition (EMT), yet the underlying mechanism remains unknown. We used an organotypic culture of primary human bronchial epithelial (HBE) cells treated with smoke-concentrated medium (Smk) to establish an essential role for the interaction between p120ctn and the cytoplasmic tail of MUC1 (MUC1-CT) in regulating E-cad disruption. Within the first 4 h of smoke exposure, apical MUC1-CT repositioned to the basolateral membrane of pseudo-stratified HBE cells, where it interacted with p120ctn. A time-dependent increase in MUC1-CT/p120ctn complexes occurred in conjunction with a time-dependent dissociation of p120ctn/E-cad/β-ctn complexes, as well as the coordinated degradation of p120ctn and E-cad. Interestingly, Smk induced a similar interaction between MUC1-CT and β-ctn, but this occurred 44 h after MUC1-CT’s initial interaction with p120ctn, and well after the AJs were destroyed. Blocking MUC1-CT’s interaction with p120ctn using a MUC1-CT dominant-negative peptide, PMIP, successfully abolished Smk’s disruptive effects on AJs and recovered apical-basolateral polarity of HBE cells. The MUC1-CT/p120ctn interaction was highly dependent on EGFR/Src/Jnk-mediated tyrosine phosphorylation (TyrP) of MUC1-CT. Accordingly, EGFR, Src or Jnk inhibitors (AG1478, PP2, SP600125, respectively) abrogated Smk-induced MUC1-CT-TyrP, MUC1-CT/p120ctn interaction, AJ disruption, and loss of cellular polarity. Our work identified MUC1-CT and p120ctn as important regulators of epithelial polarity and cell-cell adhesion during a smoke-induced EMT-like process. Novel therapeutics designed to inhibit MUC1-CT/p120ctn complex formation may prevent EMT in the smoker’s airway. PMID:22833523

Evaluation of serum Asymmetric Dimethyl Arginine concentrations in coronary artery disease patients without traditional cardiovascular risk factors.

PubMed

Ghayour-Mobarhan, Majid; Ayati, Nayyereh; Sahebkar, Amirhossein; Moohebati, Mohsen; Ayati, Narjes; Elyasi, Sepideh; Mohammadpour, Amir Houshang

2018-06-07

Previous studies have shown that Asymmetric Dimethyl Arginine (ADMA) is increased significantly during coronary artery diseases (CAD). However it is not clear either this increase is due to cardiovascular disease (CVD) risk factors or ADMA is increased independently in CAD. The aim of this study is to evaluate ADMA's plasma level as an independent biomarker in CADs. In current study a total of 165 subjects with no traditional CVD's RFs, who fulfilled the inclusion and exclusion criteria, were recruited; 55 CAD+ patients which had more than 50% stenosis (CAD+); 55 CAD- patients which had less than 50% stenosis in their coronary arteries (CAD-), based on their angiography record and 55 healthy individuals as controls. CAD+ patients were divided into three groups: single (SVD), double (2VD), and triple vessel (3VD) disease. Plasma level of soluble ADMA was measured with an enzyme-linked immono sorbent assay (ELISA) kit. No significant difference between ADMA's plasma levels was found between CAD+, CAD- and healthy groups. In addition ADMA's plasma levels was not significantly different between CAD+'s subgroups. The result of this study indicates no significant relation between ADMA's plasma levels and either presence or severity of coronary artery stenosis. Therefore, it is presumed that ADMA may not be an independent biomarker for CADs.

Biological and analytical stability of a peripheral blood gene expression score for obstructive coronary artery disease in the PREDICT and COMPASS studies.

PubMed

Daniels, Susan E; Beineke, Philip; Rhees, Brian; McPherson, John A; Kraus, William E; Thomas, Gregory S; Rosenberg, Steven

2014-10-01

A gene expression score (GES) for obstructive coronary artery disease (CAD) has been validated in two multicenter studies. Receiver-operating characteristics (ROC) analysis of the GES on an expanded Personalized Risk Evaluation and Diagnosis in the Coronary Tree (PREDICT) cohort (NCT no. 00500617) with CAD defined by quantitative coronary angiography (QCA) or clinical reads yielded similar performance (area under the curve (AUC)=0.70, N=1,502) to the original validation cohort (AUC=0.70, N=526). Analysis of 138 non-Caucasian and 1,364 Caucasian patients showed very similar performance (AUCs=0.72 vs. 0.70). To assess analytic stability, stored samples of the original validation cohort (N=526) was re-tested after 5 years, and the mean score changed from 20.3 to 19.8 after 5 years (N=501, 95 %). To assess patient scores over time, GES was determined on samples from 173 Coronary Obstruction Detection by Molecular Personalized Gene Expression (COMPASS) study (NCT no. 01117506) patients at approximately 1 year post-enrollment. Mean scores increased slightly from 15.9 to 17.3, corresponding to a 2.5 % increase in obstructive CAD likelihood. Changes in cardiovascular medications did not show a significant change in GES.

Incremental value of the CT coronary calcium score for the prediction of coronary artery disease

PubMed Central

Genders, Tessa S. S.; Pugliese, Francesca; Mollet, Nico R.; Meijboom, W. Bob; Weustink, Annick C.; van Mieghem, Carlos A. G.; de Feyter, Pim J.

2010-01-01

Objectives: To validate published prediction models for the presence of obstructive coronary artery disease (CAD) in patients with new onset stable typical or atypical angina pectoris and to assess the incremental value of the CT coronary calcium score (CTCS). Methods: We searched the literature for clinical prediction rules for the diagnosis of obstructive CAD, defined as ≥50% stenosis in at least one vessel on conventional coronary angiography. Significant variables were re-analysed in our dataset of 254 patients with logistic regression. CTCS was subsequently included in the models. The area under the receiver operating characteristic curve (AUC) was calculated to assess diagnostic performance. Results: Re-analysing the variables used by Diamond & Forrester yielded an AUC of 0.798, which increased to 0.890 by adding CTCS. For Pryor, Morise 1994, Morise 1997 and Shaw the AUC increased from 0.838 to 0.901, 0.831 to 0.899, 0.840 to 0.898 and 0.833 to 0.899. CTCS significantly improved model performance in each model. Conclusions: Validation demonstrated good diagnostic performance across all models. CTCS improves the prediction of the presence of obstructive CAD, independent of clinical predictors, and should be considered in its diagnostic work-up. PMID:20559838

Coronary artery disease concomitant with chronic obstructive pulmonary disease.

PubMed

Roversi, Sara; Roversi, Pietro; Spadafora, Giuseppe; Rossi, Rosario; Fabbri, Leonardo M

2014-01-01

Numerous epidemiologic studies have linked the presence of chronic obstructive pulmonary disease (COPD) to coronary artery disease (CAD). However, prevalence, pathological processes, clinical manifestations and therapy are still debated, as progress towards uncovering the link between these two disorders has been hindered by the complex nature of multimorbidity. Articles targeting CAD in patients with COPD were identified from the searches of MEDLINE and EMBASE databases in July 2013. Three authors reviewed available evidence, focusing on the latest development on disease prevalence, pathogenesis, clinical manifestations and therapeutic strategies. Both clinical trial and previous reviews have been included in this work. The most accredited hypothesis asserts that the main common risk factors, that is, cigarette smoke and ageing, elicit a chronic low-grade systemic inflammatory response, which affects both cardiovascular endothelial cells and airways/lung parenchyma. The development of CAD in patients with COPD potentiates the morbidity of COPD, leading to increased hospitalizations, mortality and health costs. Moreover, correct diagnosis is challenging and therapies are not clearly defined. Evidence from recently published articles highlights the importance of multimorbidity in patient management and future research. Moreover, many authors emphasize the importance of low-grade systemic inflammation as a common pathological mechanism and a possible future therapeutic target. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by John Wiley & Sons Ltd.

How effective are strategies for non-communicable disease prevention and control in a high risk population in a developing country? Isfahan Healthy Heart Programme

PubMed Central

Baghaei, Abdolmehdi; Rabiei, Katayoun; Gharipour, Mojgan; Tavasoli, Ali Akbar; Shirani, Shahin; Bahonar, Ahamad; Davarpanah, Amir Hossein; Ramezani, Mohammad Arash; Kelishadi, Roya

2010-01-01

Introduction The Isfahan Healthy Heart Programme (IHHP) is a community-based programme for non-communicable diseases prevention and control using both a population and high risk approach in Iran. This study demonstrated the efficacy of IHHP interventional strategies to improve lifestyle behaviours in a population at risk for developing cardiovascular diseases. Material and methods Healthy Lifestyle for NCDs High Risk Population is one of ten projects of IHHP. High risk individuals were defined as those who have at least one risk factor for developing coronary artery disease (CAD). Changes of behavioural indicators have been compared between two areas with a survey after 5 years of intervention. Results Among high risk individuals in the intervention and reference areas, 77.8% and 82.5% had at least one major risk factor for CAD. The prevalence of major risk factors for CAD (except cigarette smoking) was decreased in both intervention and reference areas during 5 years of intervention and the pattern of diet and physical activity was improved. Conclusions Interventional activities in IHHP targeting the high risk population seem to be effective in improving lifestyle behaviour, increasing awareness and control of risk factors of the high risk population. PMID:22371716

Designers Workbench: Towards Real-Time Immersive Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuester, F; Duchaineau, M A; Hamann, B

2001-10-03

This paper introduces the DesignersWorkbench, a semi-immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates from a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The DesignersWorkbench aims at closing this technologymore » or ''digital gap'' experienced by design and CAD engineers by transforming the classical design paradigm into its filly integrated digital and virtual analog allowing collaborative development in a semi-immersive virtual environment. This project emphasizes two key components from the classical product design cycle: freeform modeling and analysis. In the freeform modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.« less

Assessing mixed anxiety-depressive disorder. A national primary care survey.

PubMed

Balestrieri, Matteo; Isola, Miriam; Quartaroli, Mauro; Roncolato, Maurizio; Bellantuono, Cesario

2010-04-30

Prevalence and risk factors associated with mixed anxiety-depressive disorder (MAD) have yet to be established. Using MINI 5.0.1 and HADS, a two-week survey involving 21,644 primary care patients was carried out. We found 1.8% of subjects with MAD and 20% of subjects with a co-morbid anxiety and depression (CAD) disorder. MAD patients without a past history of anxiety/affective episodes were defined as "pure MAD" (pMAD: 0.9% of the sample). While MAD patients showed a number of differences vs. the other groups of patients in the socio-demographic statistics, pMAD patients were not different, apart from a higher proportion of males vs. CAD patients. Nearly in all the comparisons, MAD and pMAD patients showed lower association with life events and with a familial predisposition than the other patients. On HADS assessment, MAD showed a higher risk of anxiety and depressive symptoms than anxiety diagnoses, a lower risk of depressive symptoms than depressive diagnoses and a lower risk of both anxiety and depressive symptoms than CAD. Since more than a half of MAD patients were classified as pMAD, the hypothesis that MAD should be viewed as a partial remission of a major depression is not entirely confirmed in our study. Copyright (c) 2008 Elsevier Ltd. All rights reserved.

A four parameter optimization and troubleshooting of a RPLC - charged aerosol detection stability indicating method for determination of S-lysophosphatidylcholines in a phospholipid formulation.

PubMed

Tam, James; Ahmad, Imad A Haidar; Blasko, Andrei

2018-06-05

A four parameter optimization of a stability indicating method for non-chromophoric degradation products of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), 1-stearoyl-sn-glycero-3-phosphocholine and 2-stearoyl-sn-glycero-3-phosphocholine was achieved using a reverse phase liquid chromatography-charged aerosol detection (RPLC-CAD) technique. Using the hydrophobic subtraction model of selectivity, a core-shell, polar embedded RPLC column was selected followed by gradient-temperature optimization, resulting in ideal relative peak placements for a robust, stability indicating separation. The CAD instrument parameters, power function value (PFV) and evaporator temperature were optimized for lysophosphatidylcholines to give UV absorbance detector-like linearity performance within a defined concentration range. The two lysophosphatidylcholines gave the same response factor in the selected conditions. System specific power function values needed to be set for the two RPLC-CAD instruments used. A custom flow-divert profile, sending only a portion of the column effluent to the detector, was necessary to mitigate detector response drifting effects. The importance of the PFV optimization for each instrument of identical build and how to overcome recovery issues brought on by the matrix effects from the lipid-RP stationary phase interaction is reported. Copyright © 2018 Elsevier B.V. All rights reserved.

Mass spectrometry and tandem mass spectrometry of citrus limonoids.

PubMed

Tian, Qingguo; Schwartz, Steven J

2003-10-15

Methods for atmospheric pressure chemical ionization tandem mass spectrometry (APCI-MS/MS) of citrus limonoid aglycones and electrospray ionization tandem mass spectrometry (ESI-MS/MS) of limonoid glucosides are reported. The fragmentation patterns of four citrus limonoid aglycones (limonin, nomilin, obacunone, and deacetylnomilin) and six limonoid glucosides, that is, limonin 17-beta-D-glucopyranoside (LG), nomilin 17-beta-D-glucopyranoside (NG), nomilinic acid 17-beta-D-glucopyranoside (NAG), deacetyl nomilinic acid 17-beta-D-glucopyranoside (DNAG), obacunone 17-beta-D-glucopyranoside (OG), and obacunoic acid 17-beta-D-glucopyranoside (OAG) were investigated using a quadruple mass spectrometer in low-energy collisionally activated dissociation (CAD). The four limonoid aglycones and four limonoid glucosides (LG, OG, NAG, and DNAG) were purified from citrus seeds; the other two limonoid glucosides (NG and OAG) were tentatively identified in the crude extract of grapefruit seeds by ESI mass spectrometry in both positive and negative ion analysis. Ammonium hydroxide or acetic acid was added to the mobile phase to facilitate ionization. During positive ion APCI analysis of limonoid aglycones, protonated molecular ion, [M + H]+, or adduct ion, [M + NH3 + H]-, was formed as base peaks when ammonium hydroxide was added to the mobile phase. Molecular anions or adduct ions with acetic acid ([M + HOAc - H] and [M + HOAc]-) or a deprotonated molecular ion were produced during negative ion APCI analysis of limonoid aglycones, depending on the mobile-phase modifier used. Positive ion ESI-MS of limonoid glucosides produced adduct ions of [M + H + NH3]+, [M + Na]+, and [M + K]+ when ammonium hydroxide was added to the mobile phase. After collisionally activated dissociation (CAD) of the limonoid aglycone molecular ions in negative ion APCI analysis, fragment ions indicated structural information of the precursor ions, showing the presence of methyl, carboxyl, and oxygenated ring structure. CAD of the adduct ion [M + H + NH3]+ of limonoid glucosides produced the aglycone moiety corresponding to each glucoside. The combination of mass spectrometry and tandem mass spectrometry provides a powerful technique for identification and characterization of citrus limonoids.

Bonding to new CAD/CAM resin composites: influence of air abrasion and conditioning agents as pretreatment strategy.

PubMed

Reymus, Marcel; Roos, Malgorzata; Eichberger, Marlis; Edelhoff, Daniel; Hickel, Reinhard; Stawarczyk, Bogna

2018-04-27

Because of their industrially standardized process of manufacturing, CAD/CAM resin composites show a high degree of conversion, making a reliable bond difficult to achieve. The purpose of this experiment was to investigate the tensile bond strength (TBS) of luting composite to CAD/CAM resin composite materials as influenced by air abrasion and pretreatment strategies. The treatment factors of the present study were (1) brand of the CAD/CAM resin composite (Brilliant Crios [Coltene/Whaledent], Cerasmart [GC Europe], Shofu Block HC [Shofu], and Lava Ultimate [3M]); (2) air abrasion vs. no air abrasion; and (3) pretreatment using a silane primer (Clearfil Ceramic Primer, Kuraray) vs. a resin primer (One Coat 7 Universal, Coltene/Whaledent). Subsequently, luting composite (DuoCem, Coltene/Whaledent) was polymerized onto the substrate surface using a mold. For each combination of the levels of the three treatment factors (4 (materials) × 2 (air abrasion vs. no air abrasion; resin) × 2 (primer vs. silane primer)), n = 15, specimens were prepared. After 24 h of water storage at 37 °C and 5000 thermo-cycles (5/55 °C), TBS was measured and failure types were examined. The resulting data was analyzed using Kaplan-Meier estimates of the cumulative failure distribution function with Breslow-Gehan tests and non-parametric ANOVA (Kruskal-Wallis test) followed by the multiple pairwise Mann-Whitney U test with α-error adjustment using the Benjamini-Hochberg procedure and chi-square test (p < 0.05). The additional air abrasion step increased TBS values and lowered failure rates. Specimens pretreated using a resin primer showed significantly higher TBS and lower failure rates than those pretreated using a silane primer. The highest failure rates were observed for groups pretreated with a silane primer. Within the Shofu Block HC group, all specimens without air abrasion and pretreatment with a silane primer debonded during the aging procedure. Before fixation of CAD/CAM resin composites, the restorations should be air abraded and pretreated using a resin primer containing methyl-methacrylate to successfully bond to the luting composite. The pretreatment of the CAD/CAM resin composite using merely a silane primer results in deficient adhesion. For a reliable bond of CAD/CAM resin composites to the luting composite, air abrasion and a special pretreatment strategy are necessary in order to achieve promising long-term results.

Use of CAD systems in design of Space Station and space robots

NASA Technical Reports Server (NTRS)

Dwivedi, Suren N.; Yadav, P.; Jones, Gary; Travis, Elmer W.

1988-01-01

The evolution of CAD systems is traced. State-of-the-art CAD systems are reviewed and various advanced CAD facilities and supplementing systems being used at NASA-Goddard are described. CAD hardware, computer software, and protocols are detailed.

Identification of new biosignatures for clinical outcomes in stable coronary artery disease - The study protocol and initial observations of a prospective follow-up study in Taiwan.

PubMed

Leu, Hsin-Bang; Yin, Wei-Hsian; Tseng, Wei-Kung; Wu, Yen-Wen; Lin, Tsung-Hsien; Yeh, Hung-I; Chang, Kuan-Cheng; Wang, Ji-Hung; Wu, Chau-Chung; Chen, Jaw-Wen

2017-01-28

Either classic or novel biomarkers have not been well investigated for clinical outcomes of coronary artery disease (CAD) in Asian people especially ethnic Chinese. We reported here a prospective national-based follow-up study that aims to elucidate the clinical profiles and to identify the new biosignatures (especially the non-lipid profile and inflammatory biomakers) for future clinical outcomes in a sizable cohort of stable CAD patients in Taiwan. A total of 2500 CAD patients under stable condition after successful percutaneous coronary intervention will be enrolled for clinical data collection and blood/urine sampling in northern, southern, western, or eastern part of Taiwan between 2012 and 2017. They will be regularly followed up at least annually for 5 years to assess all cause deaths, hard clinical events (including cardiovascular death, nonfatal myocardial infarction, nonfatal stroke), and total cardiovascular events (including hard events, unplanned revascularization procedures, unplanned hospitalization for refractory or unstable angina, and for other causes such as stroke, transient ischemic attack, heart failure, or peripheral arterial occlusive disease). The classic and newly defined biosignatures will be compared in patients with and without clinical events during follow-up. The novel biomarkers will be identified via metabolomics analyses. Additionally, psychological personality and lifestyle data will be incorporated to explore the new dimensional views of the complex mechanisms of the disease. Till December 2014, the initial 1663 patients have been successfully enrolled. Among them, 85.93% are male; 36.22% have type 2 diabetes; 64.82% have hypertension; 56.04% are smokers and 20.44% have a family history of CAD. Their lipid profiles are under contemporary medical control with a mean plasma total cholesterol level of 163.51 ± 36.99 mg/dL and a mean low-density lipoprotein cholesterol level of 95.21 ± 29.98 mg/dL. This nationwide study has successfully started to update the contemporary information and to investigate the potential predictors for clinical outcomes of stable CAD patients in Taiwan. The identification of new biomarkers, lifestyle and psychological personality may help to elucidate the complex mechanisms and provide the novel rational to the individual treatment strategies in Asian especially ethnic Chinese patients with CAD.

Heart Rate Fragmentation: A Symbolic Dynamical Approach.

PubMed

Costa, Madalena D; Davis, Roger B; Goldberger, Ary L

2017-01-01

Background: We recently introduced the concept of heart rate fragmentation along with a set of metrics for its quantification. The term was coined to refer to an increase in the percentage of changes in heart rate acceleration sign, a dynamical marker of a type of anomalous variability. The effort was motivated by the observation that fragmentation, which is consistent with the breakdown of the neuroautonomic-electrophysiologic control system of the sino-atrial node, could confound traditional short-term analysis of heart rate variability. Objective: The objectives of this study were to: (1) introduce a symbolic dynamical approach to the problem of quantifying heart rate fragmentation; (2) evaluate how the distribution of the different dynamical patterns ("words") varied with the participants' age in a group of healthy subjects and patients with coronary artery disease (CAD); and (3) quantify the differences in the fragmentation patterns between the two sample populations. Methods: The symbolic dynamical method employed here was based on a ternary map of the increment NN interval time series and on the analysis of the relative frequency of symbolic sequences (words) with a pre-defined set of features. We analyzed annotated, open-access Holter databases of healthy subjects and patients with CAD, provided by the University of Rochester Telemetric and Holter ECG Warehouse (THEW). Results: The degree of fragmentation was significantly higher in older individuals than in their younger counterparts. However, the fragmentation patterns were different in the two sample populations. In healthy subjects, older age was significantly associated with a higher percentage of transitions from acceleration/deceleration to zero acceleration and vice versa (termed "soft" inflection points). In patients with CAD, older age was also significantly associated with higher percentages of frank reversals in heart rate acceleration (transitions from acceleration to deceleration and vice versa , termed "hard" inflection points). Compared to healthy subjects, patients with CAD had significantly higher percentages of soft and hard inflection points, an increased percentage of words with a high degree of fragmentation and a decreased percentage of words with a lower degree of fragmentation. Conclusion: The symbolic dynamical method employed here was useful to probe the newly recognized property of heart rate fragmentation. The findings from these cross-sectional studies confirm that CAD and older age are associated with higher levels of heart rate fragmentation. Furthermore, fragmentation with healthy aging appears to be phenotypically different from fragmentation in the context of CAD.

Evaluation of Five Microcomputer CAD Packages.

ERIC Educational Resources Information Center

Leach, James A.

1987-01-01

Discusses the similarities, differences, advanced features, applications and number of users of five microcomputer computer-aided design (CAD) packages. Included are: "AutoCAD (V.2.17)"; "CADKEY (V.2.0)"; "CADVANCE (V.1.0)"; "Super MicroCAD"; and "VersaCAD Advanced (V.4.00)." Describes the…

Bile acids at neutral and acidic pH induce apoptosis and gene cleavages in nasopharyngeal epithelial cells: implications in chromosome rearrangement.

PubMed

Tan, Sang-Nee; Sim, Sai-Peng

2018-04-12

Chronic rhinosinusitis (CRS) increases the risk of developing nasopharyngeal carcinoma (NPC) while nasopharyngeal reflux is known to be one of the major aetiological factors of CRS. Bile acid (BA), the component of gastric duodenal contents, has been recognised as a carcinogen. BA-induced apoptosis was suggested to be involved in human malignancies. Cells have the potential and tendency to survive apoptosis. However, cells that evade apoptosis upon erroneous DNA repair may carry chromosome rearrangements. Apoptotic nuclease, caspase-activated deoxyribonuclease (CAD) has been implicated in mediating translocation in leukaemia. We hypothesised that BA-induced apoptosis may cause chromosome breaks mediated by CAD leading to chromosome rearrangement in NPC. This study targeted the AF9 gene located at 9p22 because 9p22 is one of the most common deletion sites in NPC. We tested the ability of BA at neutral and acidic pH in inducing phosphatidylserine (PS) externalisation, reactive oxygen species (ROS) production, mitochondrial membrane potential (MMP) disruption, and caspase 3/7 activity in normal nasopharyngeal epithelial (NP69) and NPC (TWO4) cells. Inverse-PCR (IPCR) was employed to detect AF9 gene cleavages. To investigate the role of CAD in mediating these cleavages, caspase inhibition was performed. IPCR bands representing AF9 cleaved fragments were sequenced. BA-treated cells showed higher levels of PS externalisation, ROS production, MMP loss and caspase 3/7 activity than untreated control cells. The effect of BA in the induction of these intracellular events was enhanced by acid. BA at neutral and acidic pH also induced significant cleavage of the AF9 gene. These BA-induced gene cleavages were inhibited by Z-DEVD-FMK, a caspase-3 inhibitor. Intriguingly, a few chromosome breaks were identified within the AF9 region that was previously reported to participate in reciprocal translocation between the mixed lineage leukaemia (MLL) and AF9 genes in an acute lymphoblastic leukaemia (ALL) patient. These findings suggest a role for BA-induced apoptosis in mediating chromosome rearrangements in NPC. In addition, CAD may be a key player in chromosome cleavages mediated by BA-induced apoptosis. Persistent exposure of sinonasal tract to gastric duodenal refluxate may increase genomic instability in surviving cells.

The effect of periodontal therapy on C-reactive protein, endothelial function, lipids and proinflammatory biomarkers in patients with stable coronary artery disease: study protocol for a randomized controlled trial.

PubMed

Saffi, Marco Aurélio Lumertz; Furtado, Mariana Vargas; Montenegro, Márlon Munhoz; Ribeiro, Ingrid Webb Josephson; Kampits, Cassio; Rabelo-Silva, Eneida Rejane; Polanczyk, Carisi Anne; Rösing, Cassiano Kuchenbecker; Haas, Alex Nogueira

2013-09-06

Scarce information exists regarding the preventive effect of periodontal treatment in the recurrence of cardiovascular events. Prevention may be achieved by targeting risk factors for recurrent coronary artery disease (CAD) in patients with previous history of cardiovascular events. The aim of this trial is to compare the effect of two periodontal treatment approaches on levels of C-reactive protein, lipids, flow-mediated dilation and serum concentrations of proinflammatory and endothelial markers in stable CAD patients with periodontitis over a period of 12 months. This is a randomized, parallel design, examiner blinded, controlled clinical trial. Individuals from both genders, 35 years of age and older, with concomitant diagnosis of CAD and periodontitis will be included. CAD will be defined as the occurrence of at least one of the following events 6 months prior to entering the trial: documented history of myocardial infarction; surgical or percutaneous myocardial revascularization and lesion >50% in at least one coronary artery assessed by angiography; presence of angina and positive noninvasive testing of ischemia. Diagnosis of periodontitis will be defined using the CDC-AAP case definition (≥2 interproximal sites with clinical attachment loss ≥6 mm and ≥1 interproximal site with probing depth ≥5 mm). Individuals will have to present at least ten teeth present to be included. One hundred individuals will be allocated to test (intensive periodontal treatment comprised by scaling and root planing) or control (community periodontal treatment consisting of one session of supragingival plaque removal only) treatment groups. Full-mouth six sites per tooth periodontal examinations and subgingival biofilm samples will be conducted at baseline, 3, 6 and 12 months after treatment. The primary outcome of this study will be C-reactive protein changes over time. Secondary outcomes include levels of total cholesterol, LDL-C, HDL-C, triglycerides, IL-1β, IL-6, TNFα, fibrinogen, ICAM-1, VCAM-1 and E-selectin. These outcomes will be assessed at all time points over 12 months. Flow-mediated dilation will be assessed at baseline, 1, 3 and 6 months after periodontal therapy. This trial will provide new evidence regarding the effect of periodontal treatment on risk markers for recurrence of cardiovascular events in stable coronary artery disease patients. ClinicalTrials.gov Identifier, NCT01609725.

Usefulness of Myocardial Annular Velocity Change During Mental Stress to Predict Cardiovascular Outcome in Patients With Coronary Artery Disease (From the Responses of Mental Stress-Induced Myocardial Ischemia to Escitalopram Treatment Trial).

PubMed

Alenezi, Fawaz; Brummett, Beverly H; Boyle, Stephen H; Samad, Zainab; Babyak, Michael A; Alzaeim, Nabil; Wilson, Jennifer; Romano, Minna M D; Sun, Julia L; Ersboll, Mads; O'Connor, Christopher M; Velazquez, Eric J; Jiang, Wei

2017-11-01

Mental stress-induced myocardial ischemia is common and a prognostic factor of adverse cardiovascular outcomes in patients with coronary artery disease (CAD). The present study aimed at examining associations between mental stress-induced myocardial annular velocity (MAV) and cardiovascular outcome in patients with CAD. MAV, specifically, diastolic early (e'), diastolic late (a'), and systolic (s') velocities were obtained at rest and during mental stress testing in 224 patients with clinically stable CAD. Using Cox regression models, age, sex, and baseline-adjusted mental stress-induced MAV measures were examined as predictors of a priori defined composite event term that comprised all-cause mortality and/or nonfatal cardiovascular events, resulting in an unplanned hospitalization (major adverse cardiovascular events [MACE]). Median follow-up was 4 years. The sample was predominantly male, Caucasian with New York Heart Association functional class I and a mean age of 63 ± 10.2 years. MS-induced changes in e' (hazard ratio [HR] = .73) and s' (HR = .73) were significant (p <0.05) predictors of MACE, and the change in a' (HR = .74) was marginal (p = 0.05). The pattern of the relation for each MAV measure was such that patients with a greater decrease in e' and/or s' velocity had a higher probability of experiencing an MACE, and the association of the change in a' and MACE was marginal (p = 0.05), but the same tendency. The associations between MS-induced values of e' and a' for MACE were independent of resting levels. Mental stress-induced MAV changes independently predict an adverse cardiovascular outcome in patients with stable CAD. Copyright © 2017 Elsevier Inc. All rights reserved.

Incremental prognostic value of the SYNTAX score to late gadolinium-enhanced magnetic resonance images for patients with stable coronary artery disease.

PubMed

Kato, Shingo; Saito, Naka; Kirigaya, Hidekuni; Gyotoku, Daiki; Iinuma, Naoki; Kusakawa, Yuka; Iguchi, Kohei; Nakachi, Tatsuya; Fukui, Kazuki; Futaki, Masaaki; Iwasawa, Tae; Taguri, Masataka; Kimura, Kazuo; Umemura, Satoshi

2016-06-01

The prognostic significance of the SYNTAX (Synergy between PCI with Taxus and cardiac surgery) score has recently been demonstrated in patients with stable multivessel or left main coronary artery disease (CAD). The present study determines whether adding the SYNTAX score to Framingham risk score (FRS), left ventricular ejection fraction (LVEF) and presence of myocardial infarction (MI) by late gadolinium enhancement (LGE) magnetic resonance imaging can improve the risk stratification in patients with stable CAD. We calculated the SYNTAX score in 161 patients with stable CAD (mean age: 66 ± 10 years old). During a mean follow-up of 2.3 years, 56 (35 %) of 161 patients developed cardiovascular events defined as cardiovascular death, non-fatal MI, cerebral infarction, unstable angina pectoris, hospitalization due to heart failure and revascularization. Multivariate Cox regression analysis selected triglycerides [hazard ratio (HR): 1.005 (95 % confidence interval (CI): 1.001-1.008), p < 0.008], presence of LGE [HR: 6.329 (95 % CI: 2.662-15.05), p < 0.001] and the SYNTAX score [HR: 1.085 (95 % CI: 1.044-1.127), p < 0.001] as risk factors for future cardiovascular events. Adding the SYNTAX score to FRS, EF and LGE significantly improved the net reclassification index (NRI) [40.4 % (95 % CI: 18.1-54.8 %), p < 0.05] with an increase in C-statistics of 0.089 (from 0.707 to 0.796). An increase in C-statistics and significant improvement of NRI showed that adding the SYNTAX score to the FRS, LVEF and LGE incrementally improved risk stratification in patient with stable CAD.

World Health Organization quality of life instrument-brief and Short Form-36 in patients with coronary artery disease: do they measure similar quality of life concepts?

PubMed

Cruz, Luciane Nascimento; Camey, Suzi Alves; Fleck, Marcelo Pio; Polanczyk, Carisi Anne

2009-10-01

This study aimed to assess the validity and reliability of World Health Organization Quality of Life Instrument (WHOQOL)-brief and SF-36 in patients with coronary artery disease (CAD). Considering that depression is known to be associated with bad outcomes in CAD and it is highly associated with poor Quality of Life (QOL), we tested the correlation between WHOQOL and SF-36 and an instrument to screen depressive symptoms. It is a cross-sectional survey conducted in 103 patients with documented CAD. QOL was measured through WHOQOL-brief and SF-36 and depressive symptoms were assessed by the Beck Depression Inventory (BDI). To evaluate convergent validity, the correlations between both QOL assessment instruments were examined; discriminant validity was assessed through BDI and QOL instruments correlations. Coefficient Cronbach's alpha was used to test reliability. Percentages of floor and ceiling effects were higher in SF-36 scores than the WHOQOL-brief ones. Although WHOQOL-brief showed a maximum of 1% of floor effect and 9% of ceiling effect, SF-36 presented 40 and 32%, respectively. Internal consistency reliability ranged from 0.65 to 0.85 for the WHOQOL-brief and 0.57 to 0.89 for the SF-36. Correlations between subscales of WHOQOL-brief and BDI ranged from -0.74 to -0.61 and correlations between subscales of SF-36 and BDI ranged from -0.68 to -0.26. SF-36 and WHOQOL-brief seem to be valid and consistent QOL measures in patients with CAD. Researchers should define the aims of their studies before choosing which instrument to use, because they appear to measure different constructs of QOL.

Computer-aided diagnosis of breast microcalcifications based on dual-tree complex wavelet transform.

PubMed

Jian, Wushuai; Sun, Xueyan; Luo, Shuqian

2012-12-19

Digital mammography is the most reliable imaging modality for breast carcinoma diagnosis and breast micro-calcifications is regarded as one of the most important signs on imaging diagnosis. In this paper, a computer-aided diagnosis (CAD) system is presented for breast micro-calcifications based on dual-tree complex wavelet transform (DT-CWT) to facilitate radiologists like double reading. Firstly, 25 abnormal ROIs were extracted according to the center and diameter of the lesions manually and 25 normal ROIs were selected randomly. Then micro-calcifications were segmented by combining space and frequency domain techniques. We extracted three texture features based on wavelet (Haar, DB4, DT-CWT) transform. Totally 14 descriptors were introduced to define the characteristics of the suspicious micro-calcifications. Principal Component Analysis (PCA) was used to transform these descriptors to a compact and efficient vector expression. Support Vector Machine (SVM) classifier was used to classify potential micro-calcifications. Finally, we used the receiver operating characteristic (ROC) curve and free-response operating characteristic (FROC) curve to evaluate the performance of the CAD system. The results of SVM classifications based on different wavelets shows DT-CWT has a better performance. Compared with other results, DT-CWT method achieved an accuracy of 96% and 100% for the classification of normal and abnormal ROIs, and the classification of benign and malignant micro-calcifications respectively. In FROC analysis, our CAD system for clinical dataset detection achieved a sensitivity of 83.5% at a false positive per image of 1.85. Compared with general wavelets, DT-CWT could describe the features more effectively, and our CAD system had a competitive performance.

Computer-aided diagnosis of breast microcalcifications based on dual-tree complex wavelet transform

PubMed Central

2012-01-01

Background Digital mammography is the most reliable imaging modality for breast carcinoma diagnosis and breast micro-calcifications is regarded as one of the most important signs on imaging diagnosis. In this paper, a computer-aided diagnosis (CAD) system is presented for breast micro-calcifications based on dual-tree complex wavelet transform (DT-CWT) to facilitate radiologists like double reading. Methods Firstly, 25 abnormal ROIs were extracted according to the center and diameter of the lesions manually and 25 normal ROIs were selected randomly. Then micro-calcifications were segmented by combining space and frequency domain techniques. We extracted three texture features based on wavelet (Haar, DB4, DT-CWT) transform. Totally 14 descriptors were introduced to define the characteristics of the suspicious micro-calcifications. Principal Component Analysis (PCA) was used to transform these descriptors to a compact and efficient vector expression. Support Vector Machine (SVM) classifier was used to classify potential micro-calcifications. Finally, we used the receiver operating characteristic (ROC) curve and free-response operating characteristic (FROC) curve to evaluate the performance of the CAD system. Results The results of SVM classifications based on different wavelets shows DT-CWT has a better performance. Compared with other results, DT-CWT method achieved an accuracy of 96% and 100% for the classification of normal and abnormal ROIs, and the classification of benign and malignant micro-calcifications respectively. In FROC analysis, our CAD system for clinical dataset detection achieved a sensitivity of 83.5% at a false positive per image of 1.85. Conclusions Compared with general wavelets, DT-CWT could describe the features more effectively, and our CAD system had a competitive performance. PMID:23253202

Regulation of endothelial barrier function by p120-catenin∙VE-cadherin interaction

PubMed Central

Garrett, Joshua P.; Lowery, Anthony M.; Adam, Alejandro P.; Kowalczyk, Andrew P.; Vincent, Peter A.

2017-01-01

Endothelial p120-catenin (p120) maintains the level of vascular endothelial cadherin (VE-Cad) by inhibiting VE-Cad endocytosis. Loss of p120 results in a decrease in VE-Cad levels, leading to the formation of monolayers with decreased barrier function (as assessed by transendothelial electrical resistance [TEER]), whereas overexpression of p120 increases VE-Cad levels and promotes a more restrictive monolayer. To test whether reduced endocytosis mediated by p120 is required for VE-Cad formation of a restrictive barrier, we restored VE-Cad levels using an endocytic-defective VE-Cad mutant. This endocytic-defective mutant was unable to rescue the loss of TEER associated with p120 or VE-Cad depletion. In contrast, the endocytic-defective mutant was able to prevent sprout formation in a fibrin bead assay, suggesting that p120•VE-Cad interaction regulates barrier function and angiogenic sprouting through different mechanisms. Further investigation found that depletion of p120 increases Src activity and that loss of p120 binding results in increased VE-Cad phosphorylation. In addition, expression of a Y658F–VE-Cad mutant or an endocytic-defective Y658F–VE-Cad double mutant were both able to rescue TEER independently of p120 binding. Our results show that in addition to regulating endocytosis, p120 also allows the phosphorylated form of VE-Cad to participate in the formation of a restrictive monolayer. PMID:27852896

Benefit of computer-aided detection analysis for the detection of subsolid and solid lung nodules on thin- and thick-section CT.

PubMed

Godoy, Myrna C B; Kim, Tae Jung; White, Charles S; Bogoni, Luca; de Groot, Patricia; Florin, Charles; Obuchowski, Nancy; Babb, James S; Salganicoff, Marcos; Naidich, David P; Anand, Vikram; Park, Sangmin; Vlahos, Ioannis; Ko, Jane P

2013-01-01

The objective of our study was to evaluate the impact of computer-aided detection (CAD) on the identification of subsolid and solid lung nodules on thin- and thick-section CT. For 46 chest CT examinations with ground-glass opacity (GGO) nodules, CAD marks computed using thin data were evaluated in two phases. First, four chest radiologists reviewed thin sections (reader(thin)) for nodules and subsequently CAD marks (reader(thin) + CAD(thin)). After 4 months, the same cases were reviewed on thick sections (reader(thick)) and subsequently with CAD marks (reader(thick) + CAD(thick)). Sensitivities were evaluated. Additionally, reader(thick) sensitivity with assessment of CAD marks on thin sections was estimated (reader(thick) + CAD(thin)). For 155 nodules (mean, 5.5 mm; range, 4.0-27.5 mm)-74 solid nodules, 22 part-solid (part-solid nodules), and 59 GGO nodules-CAD stand-alone sensitivity was 80%, 95%, and 71%, respectively, with three false-positives on average (0-12) per CT study. Reader(thin) + CAD(thin) sensitivities were higher than reader(thin) for solid nodules (82% vs 57%, p < 0.001), part-solid nodules (97% vs 81%, p = 0.0027), and GGO nodules (82% vs 69%, p < 0.001) for all readers (p < 0.001). Respective sensitivities for reader(thick), reader(thick) + CAD(thick), reader(thick) + CAD(thin) were 40%, 58% (p < 0.001), and 77% (p < 0.001) for solid nodules; 72%, 73% (p = 0.322), and 94% (p < 0.001) for part-solid nodules; and 53%, 58% (p = 0.008), and 79% (p < 0.001) for GGO nodules. For reader(thin), false-positives increased from 0.64 per case to 0.90 with CAD(thin) (p < 0.001) but not for reader(thick); false-positive rates were 1.17, 1.19, and 1.26 per case for reader(thick), reader(thick) + CAD(thick), and reader(thick) + CAD(thin), respectively. Detection of GGO nodules and solid nodules is significantly improved with CAD. When interpretation is performed on thick sections, the benefit is greater when CAD marks are reviewed on thin rather than thick sections.

Minimization of Thruster Plume Effects on Spacecraft Surfaces

DTIC Science & Technology

2007-05-01

REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 ...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1 . REPORT DATE (DD-MM-YYYY) 26-03-2007 2. REPORT TYPE...Approved for public release; distribution is unlimited 1 The surfaces from user-defined CAD models of the spacecraft are loaded into COLISEUM

Children who avoid drinking cow milk have low dietary calcium intakes and poor bone health.

PubMed

Black, Ruth E; Williams, Sheila M; Jones, Ianthe E; Goulding, Ailsa

2002-09-01

Information concerning the adequacy of bone mineralization in children who customarily avoid drinking cow milk is sparse. The objective was to evaluate dietary calcium intakes, anthropometric measures, and bone health in prepubertal children with a history of long-term milk avoidance. We recruited 50 milk avoiders (30 girls, 20 boys) aged 3-10 y by advertisement. We measured current dietary calcium intakes with a food-frequency questionnaire and body composition and bone mineral density with dual-energy X-ray absorptiometry and compared the results with those of 200 milk-drinking control children. The reasons for milk avoidance were intolerance (40%), bad taste (42%), and lifestyle choice (18%). Dietary calcium intakes were low (443 +/- 230 mg Ca/d), and few children consumed substitute calcium-rich drinks or mineral supplements. Although 9 children (18%) were obese, the milk avoiders were shorter (P < 0.01), had smaller skeletons (P < 0.01), had a lower total-body bone mineral content (P < 0.01), and had lower z scores (P < 0.05) for areal bone mineral density at the femoral neck, hip trochanter, lumbar spine, ultradistal radius, and 33% radius than did control children of the same age and sex from the same community. The z scores for volumetric (size-adjusted) bone mineral density (g/cm(3)) were -0.72 +/- 1.17 for the lumbar spine and -0.72 +/- 1.35 for the 33% radius (P < 0.001). Twelve children (24%) had previously broken bones. In growing children, long-term avoidance of cow milk is associated with small stature and poor bone health. This is a major concern that warrants further study.

pH preference and avoidance responses of adult brook trout Salvelinus fontinalis and brown trout Salmo trutta.

PubMed

Fost, B A; Ferreri, C P

2015-03-01

The pH preferred and avoided by wild, adult brook trout Salvelinus fontinalis and brown trout Salmo trutta was examined in a series a laboratory tests using gradual and steep-gradient flow-through aquaria. The results were compared with those published for the observed segregation patterns of juvenile S. fontinalis and S. trutta in Pennsylvania streams. The adult S. trutta tested showed a preference for pH 4·0 while adult S. fontinalis did not prefer any pH within the range tested. Salmo trutta are not found in Pennsylvania streams with a base-flow pH < 5·8 which suggests that S. trutta prefer pH well above 4·0. Adult S. trutta displayed a lack of avoidance at pH below 5·0, as also reported earlier for juveniles. The avoidance pH of wild, adult S. fontinalis (between pH 5·5 and 6·0) and S. trutta (between pH 6·5 and 7·0) did not differ appreciably from earlier study results for the avoidance pH of juvenile S. fontinalis and S. trutta. A comparison of c.i. around these avoidance estimates indicates that avoidance pH is similar among adult S. fontinalis and S. trutta in this study. The limited overlap of c.i. for avoidance pH values for the two species, however, suggests that some S. trutta will display avoidance at a higher pH when S. fontinalis will not. The results of this study indicate that segregation patterns of adult S. fontinalis and S. trutta in Pennsylvania streams could be related to pH and that competition with S. trutta could be mediating the occurrence of S. fontinalis at some pH levels. © 2015 The Fisheries Society of the British Isles.

Comparison of sensitivity and reading time for the use of computer aided detection (CAD) of pulmonary nodules at MDCT as concurrent or second reader

NASA Astrophysics Data System (ADS)

Beyer, F.; Zierott, L.; Fallenberg, E. M.; Juergens, K.; Stoeckel, J.; Heindel, W.; Wormanns, D.

2006-03-01

Purpose: To compare sensitivity and reading time when using CAD as second reader resp. concurrent reader. Materials and Methods: Fifty chest MDCT scans due to clinical indication were analysed independently by four radiologists two times: First with CAD as concurrent reader (display of CAD results simultaneously to the primary reading by the radiologist); then after a median of 14 weeks with CAD as second reader (CAD results were shown after completion of a reading session without CAD). A prototype version of Siemens LungCAD (Siemens,Malvern,USA) was used. Sensitivities and reading times for detecting nodules >=4mm of concurrent reading, reading without CAD and second reading were recorded. In a consensus conference false positive findings were eliminated. Student's T-Test was used to compare sensitivities and reading times. Results: 108 true positive nodules were found. Mean sensitivity was .68 for reading without CAD, .68 for concurrent reading and .75 for second reading. Differences of sensitivities were significant between concurrent and second reading (p<.001) resp. reading without CAD and second reading (p=.001). Mean reading time for concurrent reading was significant shorter (274s) compared to reading without CAD (294s;p=.04) and second reading (337sp<.001). New work to be presented: To our knowledge this is the first study that compares sensitivities and reading times between use of CAD as concurrent resp. second reader. Conclusion: CAD can either be used to speed up reading of chest CT cases for pulmonary nodules without loss of sensitivity as concurrent reader -OR (and not AND) to increase sensitivity and reading time as second reader.

Effect of Casein Phosphopeptide-amorphous Calcium Phosphate Treatment on Microtensile Bond Strength to Carious Affected Dentin Using Two Adhesive Strategies

PubMed Central

Bahari, Mahmoud; Savadi Oskoee, Siavash; Kimyai, Soodabeh; Pouralibaba, Firoz; Farhadi, Farrokh; Norouzi, Marouf

2014-01-01

Background and aims. The aim was to evaluate the effect of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on microtensile bond strength (μTBS) to carious affected dentin (CAD) using etch-and-rinse and self-etch adhesive systems. Materials and methods. The occlusal surface of 32 human molars with moderate occlusal caries was removed. Infected dentin was removed until reaching CAD and the teeth were randomly divided into two groups based on the Single Bond (SB) and Clearfil SE Bond (CSE) adhesive systems. Before composite resin bonding, each group was subdivided into three subgroups of ND, CAD and CPP-ACP-treated CAD (CAD-CPP) based on the dentin substrate. After dissecting samples to l-mm-thick cross-sections (each subgroup: n = 13), μTBS was measured at a strain rate of 0.5 mm/min. Data was analyzed using two-way ANOVA, independent samples t-test and post-hoc Tukey tests (α=0.05). Results. Bond strength of both adhesive systems to ND was significantly higher than that to CAD (P <0.001) and CAD/CPP (P < 0.001). There were no significant differences between the μTBS of SB to CAD and CAD-CPP (P > 0.05).μTBS of CSE to CAD-CPP was higher than that to CAD; however, the difference was not significant (P > 0.05). Significant differences were found between SB and CSE systems only with CAD substrate (P < 0.001). Conclusion. Regardless of the adhesive system used, surface treatment of CAD with CPP-ACP did not have a significant effect on bond strength. However, bond strength to CAD was higher with SB rather than with CSE. PMID:25346832

Coronary artery disease in patients with body mass index ≥30 kg/m(2): a retrospective chart analysis.

PubMed

Alkhawam, Hassan; Nguyen, James; Sayanlar, Jason; Sogomonian, Robert; Desai, Ronak; Jolly, JoshPaul; Vyas, Neil; Syed, Umer; Homsi, Maher; Rubinstein, David

2016-01-01

In this study, we evaluated obesity as a single risk factor for coronary artery disease (CAD), along with the synergistic effect of obesity and other risk factors. A retrospective study of 7,567 patients admitted to hospital for chest pain from 2005 to 2014 and underwent cardiac catheterization. Patients were divided into two groups: obese and normal with body mass index (BMI) calculated as ≥30 kg/m(2) and <25, respectively. We assessed the modifiable and non-modifiable risk factors in obese patients and the degree of CAD. Of the 7,567 patients who underwent cardiac catheterization, 414 (5.5%) had a BMI ≥30. Of 414 obese patients, 332 (80%) had evidence of CAD. Obese patients displayed evidence of CAD at the age of 57 versus 63.3 in non-obese patients (p<0.001). Of the 332 patients with CAD and obesity, 55.4% had obstructive CAD versus 44.6% with non-obstructive CAD. In obese patients with CAD, male gender and history of smoking were major risk factors for development of obstructive CAD (p=0.001 and 0.01, respectively) while dyslipidemia was a major risk factor for non-obstructive CAD (p=0.01). Additionally, obese patients with more than one risk factor developed obstructive CAD compared to non-obstructive CAD (p=0.003). Having a BMI ≥30 appears to be a risk factor for early development of CAD. Severity of CAD in obese patients is depicted on non-modifiable and modifiable risk factors such as the male gender and smoking or greater than one risk factor, respectively.

Association of N-terminal pro-brain natriuretic peptide with the severity of coronary artery disease in patients with normal left ventricular ejection fraction.

PubMed

Wu, Naqiong; Ma, Fenglian; Guo, Yuanlin; Li, Xiaoling; Liu, Jun; Qing, Ping; Xu, Ruixia; Zhu, Chenggang; Jia, Yanjun; Liu, Geng; Dong, Qian; Jiang, Lixin; Li, Jianjun

2014-01-01

Backround N-terminal pro-brain natriuretic peptide (NT-proBNP) is a reliable predictor in acute coronary artery disease (CAD). Little is known about patients with stable CAD, especially Chinese patients with CAD. The aim of the present study was to investigate the association of NT-proBNP levels with the severity of CAD in patients with normal left ventricular ejection fraction. A total of 658 consecutive patients were divided into two groups based on angiograms: CAD group (n = 484) and angiographic normal control group (n = 174). The severity of CAD was evaluated by modified Gensini score, and its relationship with NT-proBNP was analyzed. The prevalence of risk factors such as age, male gender, diabetes mellitus (DM), dyslipidemia, smoking, and family history of CAD in the CAD group were higher than that in the control group. In multivariate regression model analysis, age, gender, and DM were determinants of the presence of CAD. NT-pro BNP was found to be an independent predictor for CAD (OR:1.66 (95% CI: 1.06-2.61), P < 0.05). In a receiver operating characteristic (ROC) curve analysis, an NT-proBNP value of 641.15 pmol/L was identified as a cut-off value in the diagnosis or exclusion of CAD (area under curve (AUC) = 0.56, 95% CI: 0.51-0.61). Furthermore, NT-proBNP was positively correlated with Gensini score (r = 0.14, P < 0.001) in patients with CAD. NT-proBNP was an independent predictor for Chinese patients with CAD, suggesting that the NT-proBNP level might be associated with the presence and the severity of CAD.

Overexpression of caldesmon is associated with tumor progression in patients with primary non-muscle-invasive bladder cancer

PubMed Central

Lee, Myung-Shin; Lee, Jisu; Kim, Joo Heon; Kim, Won Tae; Kim, Wun-Jae; Ahn, Hanjong; Park, Jinsung

2015-01-01

The expression and function of caldesmon (CAD) in urothelial bladder carcinoma (BC) have not been reported. Here, we investigated the expression, prognostic value, and potential functional mechanism of CAD in primary non-muscle-invasive bladder cancer (NMIBC). Protein profiling of tissue samples using antibody microarrays showed significantly higher CAD expression in muscle-invasive BC tissues compared with NMIBC tissues. We then validated the CAD expression in BC cells by immunohistochemistry analysis using paraffin-embedded tissue blocks and western blots using BC cell lines. In addition, we examined the expression of CAD variants by reverse transcription-polymerase chain reaction, and confirmed the expression of low-molecular-weight isoforms (L-CAD), specifically encoded by WI-38 L-CAD II (transcript variant 2), in BC cells. Survival analysis in an independent primary NMIBC cohort comprising 132 patients showed that positive CAD expression was significantly associated with poorer prognosis than no CAD expression with regard to recurrence- and progression-free survival (p = 0.001 and 0.014, respectively). Multivariate analyses further indicated that positive CAD expression was an independent predictor of progression-free survival (p = 0.032; HR = 5.983). Data obtained from in vitro silencing and overexpression studies indicated that L-CAD promotes migration and invasiveness of BC cells. Immunofluorescence assays showed dramatic structural changes in the actin cytoskeleton of BC cells after L-CAD overexpression. Our findings collectively suggest that L-CAD overexpression in primary NMIBC is significantly associated with tumor progression and that a possible mechanism for L-CAD's activity is implicated in increased cell motility and invasive characteristics through morphological changes in BC cells. PMID:26430961

A novel aromatic alcohol dehydrogenase in higher plants: molecular cloning and expression.

PubMed

Goffner, D; Van Doorsselaere, J; Yahiaoui, N; Samaj, J; Grima-Pettenati, J; Boudet, A M

1998-03-01

Cinnamyl alcohol dehydrogenase (CAD; EC 1.1.195) catalyses the conversion of p-hydroxy-cinnamaldehydes to the corresponding alcohols and is considered a key enzyme in lignin biosynthesis. In a previous study, an atypical form of CAD (CAD 1) was identified in Eucalyptus gunnii [12]. We report here the molecular cloning and characterization of the corresponding cDNA, CAD 1-5, which encodes this novel aromatic alcohol dehydrogenase. The identity of CAD 1-5 was unambiguously confirmed by sequence comparison of the cDNA with peptide sequences derived from purified CAD 1 protein and by functional expression of CAD 1 recombinant protein in Escherichia coli. Both native and recombinant CAD 1 exhibit high affinity towards lignin precursors including 4-coumaraldehyde and coniferaldehyde, but they do not accept sinapaldehyde. Moreover, recombinant CAD 1 can also utilize a wide range of aromatic substrates including unsubstituted and substituted benzaldehydes. The open reading frame of CAD 1-5 encodes a protein with a calculated molecular mass of 35,790 Da and an isoelectric point of 8.1. Although sequence comparisons with proteins in databases revealed significant similarities with dihydroflavonol-4-reductases (DFR; EC 1.1.1.219) from a wide range of plant species, the most striking similarity was found with cinnamoyl-CoA reductase (CCR; EC 1.2.1.44), the enzyme which directly precedes CAD in the lignin biosynthetic pathway. RNA blot analysis and immunolocalization experiments indicated that CAD 1 is expressed in both lignified and unlignified tissues/cells. Based on the catalytic activity of CAD 1 in vitro and its localization in planta, CAD 1 may function as an 'alternative' enzyme in the lignin biosynthetic pathway. However, additional roles in phenolic metabolism are not excluded.

Novel Cadmium Resistance Determinant in Listeria monocytogenes.

PubMed

Parsons, Cameron; Lee, Sangmi; Jayeola, Victor; Kathariou, Sophia

2017-03-01

Listeria monocytogenes is a foodborne pathogen that can cause severe disease (listeriosis) in susceptible individuals. It is ubiquitous in the environment and often exhibits resistance to heavy metals. One of the determinants that enables Listeria to tolerate exposure to cadmium is the cadAC efflux system, with CadA being a P-type ATPase. Three different cadA genes (designated cadA1 to cadA3 ) were previously characterized in L. monocytogenes A novel putative cadmium resistance gene ( cadA4 ) was recently identified through whole-genome sequencing, but experimental confirmation for its involvement in cadmium resistance is lacking. In this study, we characterized cadA4 in L. monocytogenes strain F8027, a cadmium-resistant strain of serotype 4b. By screening a mariner-based transposon library of this strain, we identified a mutant with reduced tolerance to cadmium and that harbored a single transposon insertion in cadA4 The tolerance to cadmium was restored by genetic complementation with the cadmium resistance cassette ( cadA4C ), and enhanced cadmium tolerance was conferred to two unrelated cadmium-sensitive strains via heterologous complementation with cadA4C Cadmium exposure induced cadA4 expression, even at noninhibitory levels. Virulence assessments in the Galleria mellonella model suggested that a functional cadA4 suppressed virulence, potentially promoting commensal colonization of the insect larvae. Biofilm assays suggested that cadA4 inactivation reduced biofilm formation. These data not only confirm cadA4 as a novel cadmium resistance determinant in L. monocytogenes but also provide evidence for roles in virulence and biofilm formation. IMPORTANCE Listeria monocytogenes is an intracellular foodborne pathogen causing the disease listeriosis, which is responsible for numerous hospitalizations and deaths every year. Among the adaptations that enable the survival of Listeria in the environment are the abilities to persist in biofilms, grow in the cold, and tolerate toxic compounds, such as heavy metals. Here, we characterized a novel determinant that was recently identified on a larger mobile genetic island through whole-genome sequencing. This gene ( cadA4 ) was found to be responsible for cadmium detoxification and to be a divergent member of the Cad family of cadmium efflux pumps. Virulence assessments in a Galleria mellonella model suggested that cadA4 may suppress virulence. Additionally, cadA4 may be involved in the ability of Listeria to form biofilms. Beyond the role in cadmium detoxification, the involvement of cadA4 in other cellular functions potentially explains its retention and wide distribution in L. monocytogenes . Copyright © 2017 American Society for Microbiology.

Improving digital breast tomosynthesis reading time: A pilot multi-reader, multi-case study using concurrent Computer-Aided Detection (CAD).

PubMed

Balleyguier, Corinne; Arfi-Rouche, Julia; Levy, Laurent; Toubiana, Patrick R; Cohen-Scali, Franck; Toledano, Alicia Y; Boyer, Bruno

2017-12-01

Evaluate concurrent Computer-Aided Detection (CAD) with Digital Breast Tomosynthesis (DBT) to determine impact on radiologist performance and reading time. The CAD system detects and extracts suspicious masses, architectural distortions and asymmetries from DBT planes that are blended into corresponding synthetic images to form CAD-enhanced synthetic images. Review of CAD-enhanced images and navigation to corresponding planes to confirm or dismiss potential lesions allows radiologists to more quickly review DBT planes. A retrospective, crossover study with and without CAD was conducted with six radiologists who read an enriched sample of 80 DBT cases including 23 malignant lesions in 21 women. Area Under the Receiver Operating Characteristic (ROC) Curve (AUC) compared the readings with and without CAD to determine the effect of CAD on overall interpretation performance. Sensitivity, specificity, recall rate and reading time were also assessed. Multi-reader, multi-case (MRMC) methods accounting for correlation and requiring correct lesion localization were used to analyze all endpoints. AUCs were based on a 0-100% probability of malignancy (POM) score. Sensitivity and specificity were based on BI-RADS scores, where 3 or higher was positive. Average AUC across readers without CAD was 0.854 (range: 0.785-0.891, 95% confidence interval (CI): 0.769,0.939) and 0.850 (range: 0.746-0.905, 95% CI: 0.751,0.949) with CAD (95% CI for difference: -0.046,0.039), demonstrating non-inferiority of AUC. Average reduction in reading time with CAD was 23.5% (95% CI: 7.0-37.0% improvement), from an average 48.2 (95% CI: 39.1,59.6) seconds without CAD to 39.1 (95% CI: 26.2,54.5) seconds with CAD. Per-patient sensitivity was the same with and without CAD (0.865; 95% CI for difference: -0.070,0.070), and there was a small 0.022 improvement (95% CI for difference: -0.046,0.089) in per-lesion sensitivity from 0.790 without CAD to 0.812 with CAD. A slight reduction in specificity with a -0.014 difference (95% CI for difference: -0.079,0.050) and a small 0.025 increase (95% CI for difference: -0.036,0.087) in recall rate in non-cancer cases were observed with CAD. Concurrent CAD resulted in faster reading time with non-inferiority of radiologist interpretation performance. Radiologist sensitivity, specificity and recall rate were similar with and without CAD. Copyright © 2017 Elsevier B.V. All rights reserved.

Identification of Cadherin 11 as a Mediator of Dermal Fibrosis and Possible Role in Systemic Sclerosis

PubMed Central

Wu, Minghua; Pedroza, Mesias; Lafyatis, Robert; George, Anuh-Teresa; Mayes, Maureen D.; Assassi, Shervin; Tan, Filemon K.; Brenner, Michael B.; Agarwal, Sandeep K.

2014-01-01

Objective Systemic sclerosis (SSc) is a chronic autoimmune disease clinically manifesting as progressive fibrosis of the skin and internal organs. Recent microarray studies demonstrated that cadherin 11 (Cad-11) expression is increased in the affected skin of patients with SSc. The purpose of this study was to examine our hypothesis that Cad-11 is a mediator of dermal fibrosis. Methods Biopsy samples of skin from SSc patients and healthy control subjects were used for real-time quantitative polymerase chain reaction analysis to assess Cad-11 expression and for immunohistochemistry to determine the expression pattern of Cad-11. To determine whether Cad-11 is a mediator of dermal fibrosis, Cad-11–deficient mice and anti–Cad-11 monoclonal antibodies (mAb) were used in the bleomycin-induced dermal fibrosis model. In vitro studies with dermal fibroblasts and bone marrow–derived macrophages were used to determine the mechanisms by which Cad-11 contributes to the development of tissue fibrosis. Results Levels of messenger RNA for Cad-11 were increased in skin biopsy samples from patients with SSc and correlated with the modified Rodnan skin thickness scores. Cad-11 expression was localized to dermal fibroblasts and macrophages in SSc skin. Cad-11–knockout mice injected with bleomycin had markedly attenuated dermal fibrosis, as quantified by measurements of skin thickness, collagen levels, myofibroblast accumulation, and profibrotic gene expression, in lesional skin as compared to the skin of wild-type mice. In addition, anti–Cad-11 mAb decreased fibrosis at various time points in the bleomycin-induced dermal fibrosis model. In vitro studies demonstrated that Cad-11 regulated the production of transforming growth factor β (TGFβ) by macrophages and the migration of fibroblasts. Conclusion These data demonstrate that Cad-11 is a mediator of dermal fibrosis and TGFβ production and suggest that Cad-11 may be a therapeutic target in SSc. PMID:24757152

Role of Computer Aided Diagnosis (CAD) in the detection of pulmonary nodules on 64 row multi detector computed tomography.

PubMed

Prakashini, K; Babu, Satish; Rajgopal, K V; Kokila, K Raja

2016-01-01

To determine the overall performance of an existing CAD algorithm with thin-section computed tomography (CT) in the detection of pulmonary nodules and to evaluate detection sensitivity at a varying range of nodule density, size, and location. A cross-sectional prospective study was conducted on 20 patients with 322 suspected nodules who underwent diagnostic chest imaging using 64-row multi-detector CT. The examinations were evaluated on reconstructed images of 1.4 mm thickness and 0.7 mm interval. Detection of pulmonary nodules, initially by a radiologist of 2 years experience (RAD) and later by CAD lung nodule software was assessed. Then, CAD nodule candidates were accepted or rejected accordingly. Detected nodules were classified based on their size, density, and location. The performance of the RAD and CAD system was compared with the gold standard that is true nodules confirmed by consensus of senior RAD and CAD together. The overall sensitivity and false-positive (FP) rate of CAD software was calculated. Of the 322 suspected nodules, 221 were classified as true nodules on the consensus of senior RAD and CAD together. Of the true nodules, the RAD detected 206 (93.2%) and 202 (91.4%) by the CAD. CAD and RAD together picked up more number of nodules than either CAD or RAD alone. Overall sensitivity for nodule detection with the CAD program was 91.4%, and FP detection per patient was 5.5%. The CAD showed comparatively higher sensitivity for nodules of size 4-10 mm (93.4%) and nodules in hilar (100%) and central (96.5%) location when compared to RAD's performance. CAD performance was high in detecting pulmonary nodules including the small size and low-density nodules. CAD even with relatively high FP rate, assists and improves RAD's performance as a second reader, especially for nodules located in the central and hilar region and for small nodules by saving RADs time.

N-cadherin{sup +} HSCs in fetal liver exhibit higher long-term bone marrow reconstitution activity than N-cadherin{sup -} HSCs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toyama, Hirofumi; Arai, Fumio; Hosokawa, Kentaro

Highlights: Black-Right-Pointing-Pointer High N-cad expression was detected in E12.5 mouse FL LT-HSCs (EPCR{sup +} LSK cells). Black-Right-Pointing-Pointer Immunohistochemically, N-cad{sup +} HSCs co-localized with sinusoidal ECs (Lyve-1{sup +} cells) in E12.5 FL, but these gradually detached in E15.5 and E18.5 FL. Black-Right-Pointing-Pointer N-cad{sup +} LSK cells in E12.5 FL exhibited higher LTR activity versus N-cad{sup -} LSK cells, which decreased in E15.5 and E18.5. Black-Right-Pointing-Pointer N-cad expression may confer high LTR activity to HSCs by facilitating interactions with the perisinusoidal niche in FL. -- Abstract: Adult hematopoietic stem cells (HSCs) are maintained in a microenvironment known as the stem cell niche.more » The regulation of HSCs in fetal liver (FL) and their niche, however, remains to be elucidated. In this study, we investigated the role of N-cadherin (N-cad) in the maintenance of HSCs during FL hematopoiesis. By using anti-N-cad antibodies (Abs) produced by our laboratory, we detected high N-cad expression in embryonic day 12.5 (E12.5) mouse FL HSCs, but not in E15.5 and E18.5 FL. Immunofluorescence staining revealed that N-cad{sup +}c-Kit{sup +} and N-cad{sup +} endothelial protein C receptor (EPCR){sup +} HSCs co-localized with Lyve-1{sup +} sinusoidal endothelial cells (ECs) in E12.5 FL and that some of these cells also expressed N-cad. However, N-cad{sup +} HSCs were also observed to detach from the perisinusoidal niche at E15.5 and E18.5, concomitant with a down-regulation of N-cad and an up-regulation of E-cadherin (E-cad) in hepatic cells. Moreover, EPCR{sup +} long-term (LT)-HSCs were enriched in the N-cad{sup +}Lin{sup -}Sca-1{sup +}c-Kit{sup +} (LSK) fraction in E12.5 FL, but not in E15.5 or E18.5 FL. In a long-term reconstitution (LTR) activity assay, higher engraftment associated with N-cad{sup +} LSK cells versus N-cad{sup -} LSK cells in E12.5 FL when transplanted into lethally irradiated recipient mice. However, the higher engraftment of N-cad{sup +} LSK cells decreased subsequently in E15.5 and E18.5 FL. It is possible that N-cad expression conferred higher LTR activity to HSCs by facilitating interactions with the perisinusoidal niche, especially at E12.5. The down-regulation of N-cad during FL hematopoiesis may help us better understand the regulation and mobility of HSCs before migration into BM.« less

The Coronary Artery Disease-Reporting and Data System (CAD-RADS): Prognostic and Clinical Implications Associated With Standardized Coronary Computed Tomography Angiography Reporting.

PubMed

Xie, Joe X; Cury, Ricardo C; Leipsic, Jonathon; Crim, Matthew T; Berman, Daniel S; Gransar, Heidi; Budoff, Matthew J; Achenbach, Stephan; Ó Hartaigh, Bríain; Callister, Tracy Q; Marques, Hugo; Rubinshtein, Ronen; Al-Mallah, Mouaz H; Andreini, Daniele; Pontone, Gianluca; Cademartiri, Filippo; Maffei, Erica; Chinnaiyan, Kavitha; Raff, Gilbert; Hadamitzky, Martin; Hausleiter, Joerg; Feuchtner, Gudrun; Dunning, Allison; DeLago, Augustin; Kim, Yong-Jin; Kaufmann, Philipp A; Villines, Todd C; Chow, Benjamin J W; Hindoyan, Niree; Gomez, Millie; Lin, Fay Y; Jones, Erica; Min, James K; Shaw, Leslee J

2018-01-01

This study sought to assess clinical outcomes associated with the novel Coronary Artery Disease-Reporting and Data System (CAD-RADS) scores used to standardize coronary computed tomography angiography (CTA) reporting and their potential utility in guiding post-coronary CTA care. Clinical decision support is a major focus of health care policies aimed at improving guideline-directed care. Recently, CAD-RADS was developed to standardize coronary CTA reporting and includes clinical recommendations to facilitate patient management after coronary CTA. In the multinational CONFIRM (COronary CT Angiography EvaluatioN For Clinical Outcomes: An InteRnational Multicenter) registry, 5,039 patients without known coronary artery disease (CAD) underwent coronary CTA and were stratified by CAD-RADS scores, which rank CAD stenosis severity as 0 (0%), 1 (1% to 24%), 2 (25% to 49%), 3 (50% to 69%), 4A (70% to 99% in 1 to 2 vessels), 4B (70% to 99% in 3 vessels or ≥50% left main), or 5 (100%). Kaplan-Meier and multivariable Cox models were used to estimate all-cause mortality or myocardial infarction (MI). Receiver-operating characteristic (ROC) curves were used to compare CAD-RADS to the Duke CAD Index and traditional CAD classification. Referrals to invasive coronary angiography (ICA) after coronary CTA were also assessed. Cumulative 5-year event-free survival ranged from 95.2% to 69.3% for CAD-RADS 0 to 5 (p < 0.0001). Higher scores were associated with elevations in event risk (hazard ratio: 2.46 to 6.09; p < 0.0001). The ROC curve for prediction of death or MI was 0.7052 for CAD-RADS, which was noninferior to the Duke Index (0.7073; p = 0.893) and traditional CAD classification (0.7095; p = 0.783). ICA rates were 13% for CAD-RADS 0 to 2, 66% for CAD-RADS 3, and 84% for CAD-RADS ≥4A. For CAD-RADS 3, 58% of all catheterizations occurred within the first 30 days of follow-up. In a patient subset with available medication data, 57% of CAD-RADS 3 patients who received 30-day ICA were either asymptomatic or not receiving antianginal therapy at baseline, whereas only 32% had angina and were receiving medical therapy. CAD-RADS effectively identified patients at risk for adverse events. Frequent ICA use was observed among patients without severe CAD, many of whom were asymptomatic or not taking antianginal drugs. Incorporating CAD-RADS into coronary CTA reports may provide a novel opportunity to promote evidence-based care post-coronary CTA. Copyright © 2018 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Observer training for computer-aided detection of pulmonary nodules in chest radiography.

PubMed

De Boo, Diederick W; van Hoorn, François; van Schuppen, Joost; Schijf, Laura; Scheerder, Maeke J; Freling, Nicole J; Mets, Onno; Weber, Michael; Schaefer-Prokop, Cornelia M

2012-08-01

To assess whether short-term feedback helps readers to increase their performance using computer-aided detection (CAD) for nodule detection in chest radiography. The 140 CXRs (56 with a solitary CT-proven nodules and 84 negative controls) were divided into four subsets of 35; each were read in a different order by six readers. Lesion presence, location and diagnostic confidence were scored without and with CAD (IQQA-Chest, EDDA Technology) as second reader. Readers received individual feedback after each subset. Sensitivity, specificity and area under the receiver-operating characteristics curve (AUC) were calculated for readings with and without CAD with respect to change over time and impact of CAD. CAD stand-alone sensitivity was 59 % with 1.9 false-positives per image. Mean AUC slightly increased over time with and without CAD (0.78 vs. 0.84 with and 0.76 vs. 0.82 without CAD) but differences did not reach significance. The sensitivity increased (65 % vs. 70 % and 66 % vs. 70 %) and specificity decreased over time (79 % vs. 74 % and 80 % vs. 77 %) but no significant impact of CAD was found. Short-term feedback does not increase the ability of readers to differentiate true- from false-positive candidate lesions and to use CAD more effectively. • Computer-aided detection (CAD) is increasingly used as an adjunct for many radiological techniques. • Short-term feedback does not improve reader performance with CAD in chest radiography. • Differentiation between true- and false-positive CAD for low conspicious possible lesions proves difficult. • CAD can potentially increase reader performance for nodule detection in chest radiography.

Genetics of coronary artery disease and myocardial infarction

PubMed Central

Dai, Xuming; Wiernek, Szymon; Evans, James P; Runge, Marschall S

2016-01-01

Atherosclerotic coronary artery disease (CAD) comprises a broad spectrum of clinical entities that include asymptomatic subclinical atherosclerosis and its clinical complications, such as angina pectoris, myocardial infarction (MI) and sudden cardiac death. CAD continues to be the leading cause of death in industrialized society. The long-recognized familial clustering of CAD suggests that genetics plays a central role in its development, with the heritability of CAD and MI estimated at approximately 50% to 60%. Understanding the genetic architecture of CAD and MI has proven to be difficult and costly due to the heterogeneity of clinical CAD and the underlying multi-decade complex pathophysiological processes that involve both genetic and environmental interactions. This review describes the clinical heterogeneity of CAD and MI to clarify the disease spectrum in genetic studies, provides a brief overview of the historical understanding and estimation of the heritability of CAD and MI, recounts major gene discoveries of potential causal mutations in familial CAD and MI, summarizes CAD and MI-associated genetic variants identified using candidate gene approaches and genome-wide association studies (GWAS), and summarizes the current status of the construction and validations of genetic risk scores for lifetime risk prediction and guidance for preventive strategies. Potential protective genetic factors against the development of CAD and MI are also discussed. Finally, GWAS have identified multiple genetic factors associated with an increased risk of in-stent restenosis following stent placement for obstructive CAD. This review will also address genetic factors associated with in-stent restenosis, which may ultimately guide clinical decision-making regarding revascularization strategies for patients with CAD and MI. PMID:26839654

Quantitative diagnostic performance of myocardial perfusion SPECT with attenuation correction in women.

PubMed

Wolak, Arik; Slomka, Piotr J; Fish, Mathews B; Lorenzo, Santiago; Berman, Daniel S; Germano, Guido

2008-06-01

Attenuation correction (AC) for myocardial perfusion SPECT (MPS) had not been evaluated separately in women despite specific considerations in this group because of breast photon attenuation. We aimed to evaluate the performance of AC in women by using automated quantitative analysis of MPS to avoid any bias. Consecutive female patients--134 with a low likelihood (LLk) of coronary artery disease (CAD) and 114 with coronary angiography performed within less than 3 mo of MPS--who were referred for rest-stress electrocardiography-gated 99mTc-sestamibi MPS with AC were considered. Imaging data were evaluated for contour quality control. An additional 50 LLk studies in women were used to create equivalent normal limits for studies with AC and with no correction (NC). An experienced technologist unaware of the angiography and other results performed the contour quality control. All other processing was performed in a fully automated manner. Quantitative analysis was performed with the Cedars-Sinai myocardial perfusion analysis package. All automated segmental analyses were performed with the 17-segment, 5-point American Heart Association model. Summed stress scores (SSS) of > or =3 were considered abnormal. CAD (> or =70% stenosis) was present in 69 of 114 patients (60%). The normalcy rates were 93% for both NC and AC studies. The SSS for patients with CAD and without CAD for NC versus AC were 10.0 +/- 9.0 (mean +/- SD) versus 10.2 +/- 8.5 and 1.6 +/- 2.3 versus 1.8 +/- 2.5, respectively; P was not significant (NS) for all comparisons of NC versus AC. The SSS for LLk patients for NC versus AC were 0.51 +/- 1.0 versus 0.6 +/- 1.1, respectively; P was NS. The specificity for both NC and AC was 73%. The sensitivities for NC and AC were 80% and 81%, respectively, and the accuracies for NC and AC were 77% and 78%, respectively; P was NS for both comparisons. There are no significant diagnostic differences between automated quantitative MPS analyses performed in studies processed with and without AC in women.

How to use and integrate bioinformatics tools to compare proteomic data from distinct conditions? A tutorial using the pathological similarities between Aortic Valve Stenosis and Coronary Artery Disease as a case-study.

PubMed

Trindade, Fábio; Ferreira, Rita; Magalhães, Beatriz; Leite-Moreira, Adelino; Falcão-Pires, Inês; Vitorino, Rui

2018-01-16

Nowadays we are surrounded by a plethora of bioinformatics tools, powerful enough to deal with the large amounts of data arising from proteomic studies, but whose application is sometimes hard to find. Therefore, we used a specific clinical problem - to discriminate pathophysiology and potential biomarkers between two similar cardiovascular diseases, aortic valve stenosis (AVS) and coronary artery disease (CAD) - to make a step-by-step guide through four bioinformatics tools: STRING, DisGeNET, Cytoscape and ClueGO. Proteome data was collected from articles available on PubMed centered on proteomic studies enrolling subjects with AVS or CAD. Through the analysis of gene ontology provided by STRING and ClueGO we could find specific biological phenomena associated with AVS, such as down-regulation of elastic fiber assembly, and with CAD, such as up-regulation of plasminogen activation. Moreover, through Cytoscape and DisGeNET we could pinpoint surrogate markers either for AVS (e.g. popeye domain containing protein 2 and 28S ribosomal protein S36, mitochondrial) or for CAD (e.g. ankyrin repeat and SOCS box protein 7) which deserve future validation. Data recycling and integration as well as research orientation are among the main advantages of resorting to bioinformatics analysis, hence these tutorials can be of great convenience for proteomics investigators. As we saw for aortic valve stenosis and coronary artery disease, it can be of great relevance to perform preliminary bioinformatics analysis with already published proteomics data. It not only saves us time in the lab (avoiding work duplication) as it points out new hypothesis to explain the phenotypical presentation of the diseases as well as new surrogate markers with clinical relevance, deserving future scrutiny. These essential steps can be easily overcome if one follows the steps proposed in our tutorial for STRING, DisGeNET, Cytoscape and ClueGO utilization. Copyright © 2017 Elsevier B.V. All rights reserved.

Undertreatment of hyperlipidemia in patients with coronary artery disease and heart failure.

PubMed

Sueta, Carla A; Massing, Mark W; Chowdhury, Mridul; Biggs, David P; Simpson, Ross J

2003-02-01

Coronary artery disease patients with heart failure (CAD+HF) are at high risk for cardiovascular events. We examined the frequency of lipid assessment and prescription of lipid-lowering agents in outpatients with combined CAD+HF compared with patients with CAD alone. We analyzed an administrative data set from the Quality Assurance Program II, a Merck & Co., Inc., sponsored national retrospective chart audit of 41,487 CAD patients seen at 296 ambulatory medical practices. About 34% of these patients had CAD+HF. Documentation of low-density lipoprotein (LDL) cholesterol was significantly lower in patients with CAD+HF (53%) compared with those with CAD alone (69%). Lipid-lowering drugs were prescribed in only 36% of patients with CAD+HF, compared with 52% of patients with CAD alone. Lipid levels alone did not justify this disparity. Patients with documented LDL cholesterol values were 4 times more likely to receive a prescription for a lipid-lowering medication than those without recorded values. Other predictors of lipid-lowering prescription included: younger age, history of myocardial infarction, revascularization, care by a cardiologist, and geographic region. Patients with CAD, HF, and advanced age simultaneously experience among the highest risk and the lowest lipid-lowering treatment rates. Strategies to increase LDL testing and aggressively treat patients with heart failure and CAD are warranted.

Quality assurance and training procedures for computer-aided detection and diagnosis systems in clinical usea)

PubMed Central

Huo, Zhimin; Summers, Ronald M.; Paquerault, Sophie; Lo, Joseph; Hoffmeister, Jeffrey; Armato, Samuel G.; Freedman, Matthew T.; Lin, Jesse; Ben Lo, Shih-Chung; Petrick, Nicholas; Sahiner, Berkman; Fryd, David; Yoshida, Hiroyuki; Chan, Heang-Ping

2013-01-01

Computer-aided detection/diagnosis (CAD) is increasingly used for decision support by clinicians for detection and interpretation of diseases. However, there are no quality assurance (QA) requirements for CAD in clinical use at present. QA of CAD is important so that end users can be made aware of changes in CAD performance both due to intentional or unintentional causes. In addition, end-user training is critical to prevent improper use of CAD, which could potentially result in lower overall clinical performance. Research on QA of CAD and user training are limited to date. The purpose of this paper is to bring attention to these issues, inform the readers of the opinions of the members of the American Association of Physicists in Medicine (AAPM) CAD subcommittee, and thus stimulate further discussion in the CAD community on these topics. The recommendations in this paper are intended to be work items for AAPM task groups that will be formed to address QA and user training issues on CAD in the future. The work items may serve as a framework for the discussion and eventual design of detailed QA and training procedures for physicists and users of CAD. Some of the recommendations are considered by the subcommittee to be reasonably easy and practical and can be implemented immediately by the end users; others are considered to be “best practice” approaches, which may require significant effort, additional tools, and proper training to implement. The eventual standardization of the requirements of QA procedures for CAD will have to be determined through consensus from members of the CAD community, and user training may require support of professional societies. It is expected that high-quality CAD and proper use of CAD could allow these systems to achieve their true potential, thus benefiting both the patients and the clinicians, and may bring about more widespread clinical use of CAD for many other diseases and applications. It is hoped that the awareness of the need for appropriate CAD QA and user training will stimulate new ideas and approaches for implementing such procedures efficiently and effectively as well as funding opportunities to fulfill such critical efforts. PMID:23822459

European Society of Cardiology-Recommended Coronary Artery Disease Consortium Pretest Probability Scores More Accurately Predict Obstructive Coronary Disease and Cardiovascular Events Than the Diamond and Forrester Score: The Partners Registry.

PubMed

Bittencourt, Marcio Sommer; Hulten, Edward; Polonsky, Tamar S; Hoffman, Udo; Nasir, Khurram; Abbara, Suhny; Di Carli, Marcelo; Blankstein, Ron

2016-07-19

The most appropriate score for evaluating the pretest probability of obstructive coronary artery disease (CAD) is unknown. We sought to compare the Diamond-Forrester (DF) score with the 2 CAD consortium scores recently recommended by the European Society of Cardiology. We included 2274 consecutive patients (age, 56±13 years; 57% male) without prior CAD referred for coronary computed tomographic angiography. Computed tomographic angiography findings were used to determine the presence or absence of obstructive CAD (≥50% stenosis). We compared the DF score with the 2 CAD consortium scores with respect to their ability to predict obstructive CAD and the potential implications of these scores on the downstream use of testing for CAD, as recommended by current guidelines. The DF score did not satisfactorily fit the data and resulted in a significant overestimation of the prevalence of obstructive CAD (P<0.001); the CAD consortium basic score had no significant lack of fitness; and the CAD consortium clinical provided adequate goodness of fit (P=0.39). The DF score had a lower discrimination for obstructive CAD, with an area under the receiver-operating characteristics curve of 0.713 versus 0.752 and 0.791 for the CAD consortium models (P<0.001 for both). Consequently, the use of the DF score was associated with fewer individuals being categorized as requiring no additional testing (8.3%) compared with the CAD consortium models (24.6% and 30.0%; P<0.001). The proportion of individuals with a high pretest probability was 18% with the DF and only 1.1% with the CAD consortium scores (P<0.001) CONCLUSIONS: Among contemporary patients referred for noninvasive testing, the DF risk score overestimates the risk of obstructive CAD. On the other hand, the CAD consortium scores offered improved goodness of fit and discrimination; thus, their use could decrease the need for noninvasive or invasive testing while increasing the yield of such tests. © 2016 American Heart Association, Inc.

Effect of Preparation Depth on the Marginal and Internal Adaptation of Computer-aided Design/Computer-assisted Manufacture Endocrowns.

PubMed

Gaintantzopoulou, M D; El-Damanhoury, H M

The aim of the study was to evaluate the effect of preparation depth and intraradicular extension on the marginal and internal adaptation of computer-aided design/computer-assisted manufacture (CAD/CAM) endocrown restorations. Standardized preparations were made in resin endodontic tooth models (Nissin Dental), with an intracoronal preparation depth of 2 mm (group H2), with extra 1- (group H3) or 2-mm (group H4) intraradicular extensions in the root canals (n=12). Vita Enamic polymer-infiltrated ceramic-network material endocrowns were fabricated using the CEREC AC CAD/CAM system and were seated on the prepared teeth. Specimens were evaluated by microtomography. Horizontal and vertical tomographic sections were recorded and reconstructed by using the CTSkan software (TView v1.1, Skyscan).The surface/void volume (S/V) in the region of interest was calculated. Marginal gap (MG), absolute marginal discrepancy (MD), and internal marginal gap were measured at various measuring locations and calculated in microscale (μm). Marginal and internal discrepancy data (μm) were analyzed with nonparametric Kruskal-Wallis analysis of variance by ranks with Dunn's post hoc, whereas S/V data were analyzed by one-way analysis of variance and Bonferroni multiple comparisons (α=0.05). Significant differences were found in MG, MD, and internal gap width values between the groups, with H2 showing the lowest values from all groups. S/V calculations presented significant differences between H2 and the other two groups (H3 and H4) tested, with H2 again showing the lowest values. Increasing the intraradicular extension of endocrown restorations increased the marginal and internal gap of endocrown restorations.

Scaffold Library for Tissue Engineering: A Geometric Evaluation

PubMed Central

Chantarapanich, Nattapon; Puttawibul, Puttisak; Sucharitpwatskul, Sedthawatt; Jeamwatthanachai, Pongnarin; Inglam, Samroeng; Sitthiseripratip, Kriskrai

2012-01-01

Tissue engineering scaffold is a biological substitute that aims to restore, to maintain, or to improve tissue functions. Currently available manufacturing technology, that is, additive manufacturing is essentially applied to fabricate the scaffold according to the predefined computer aided design (CAD) model. To develop scaffold CAD libraries, the polyhedrons could be used in the scaffold libraries development. In this present study, one hundred and nineteen polyhedron models were evaluated according to the established criteria. The proposed criteria included considerations on geometry, manufacturing feasibility, and mechanical strength of these polyhedrons. CAD and finite element (FE) method were employed as tools in evaluation. The result of evaluation revealed that the close-cellular scaffold included truncated octahedron, rhombicuboctahedron, and rhombitruncated cuboctahedron. In addition, the suitable polyhedrons for using as open-cellular scaffold libraries included hexahedron, truncated octahedron, truncated hexahedron, cuboctahedron, rhombicuboctahedron, and rhombitruncated cuboctahedron. However, not all pore size to beam thickness ratios (PO : BT) were good for making the open-cellular scaffold. The PO : BT ratio of each library, generating the enclosed pore inside the scaffold, was excluded to avoid the impossibility of material removal after the fabrication. The close-cellular libraries presented the constant porosity which is irrespective to the different pore sizes. The relationship between PO : BT ratio and porosity of open-cellular scaffold libraries was displayed in the form of Logistic Power function. The possibility of merging two different types of libraries to produce the composite structure was geometrically evaluated in terms of the intersection index and was mechanically evaluated by means of FE analysis to observe the stress level. The couples of polyhedrons presenting low intersection index and high stress level were excluded. Good couples for producing the reinforced scaffold were hexahedron-truncated hexahedron and cuboctahedron-rhombitruncated cuboctahedron. PMID:23056147

Benefits & risks of statin therapy for primary prevention of cardiovascular disease in Asian Indians – A population with the highest risk of premature coronary artery disease & diabetes

PubMed Central

Enas, Enas A.; Kuruvila, Arun; Khanna, Pravien; Pitchumoni, C.S.; Mohan, Viswanathan

2013-01-01

Several reviews and meta-analyses have demonstrated the incontrovertible benefits of statin therapy in patients with cardiovascular disease (CVD). But the role for statins in primary prevention remained unclear. The updated 2013 Cochrane review has put to rest all lingering doubts about the overwhelming benefits of long-term statin therapy in primary prevention by conclusively demonstrating highly significant reductions in all-cause mortality, major adverse cardiovascular events (MACE) and the need for coronary artery revascularization procedures (CARPs). More importantly, these benefits of statin therapy are similar at all levels of CVD risk, including subjects at low (<1% per year) risk of a MACE. In addition to preventing myocardial infarction (MI), stroke, and death, primary prevention with statins is also highly effective in delaying and avoiding expensive CARPs such as angioplasties, stents, and bypass surgeries. There is no evidence of any serious harm or threat to life caused by statin therapy, though several adverse effects that affect the quality of life, especially diabetes mellitus (DM) have been reported. Asian Indians have the highest risk of premature coronary artery disease (CAD) and diabetes. When compared with Whites, Asian Indians have double the risk of CAD and triple the risk of DM, when adjusted for traditional risk factors for these diseases. Available evidence supports the use of statin therapy for primary prevention in Asian Indians at a younger age and with lower targets for low-density lipoprotein cholesterol (LDL-C) and non-high density lipoprotein (non-HDL-C), than those currently recommended for Americans and Europeans. Early and aggressive statin therapy offers the greatest potential for reducing the continuing epidemic of CAD among Indians. PMID:24434254

Socioeconomic status and stress-induced increases in interleukin-6.

PubMed

Brydon, L; Edwards, S; Mohamed-Ali, V; Steptoe, A

2004-05-01

Coronary artery disease (CAD) is more prevalent in people from a low socioeconomic background, and low socioeconomic status (SES) is associated with an increased exposure to psychological stress. The pro-inflammatory cytokine interleukin-6 (IL-6) plays a central role in CAD development. IL-6 is responsive to psychological stress and could potentially mediate the effect of psychosocial factors on CAD risk. Accordingly, we predicted that people of low SES would have greater and/or more sustained IL-6 responses to acute psychological stress. Based on previous findings, we also predicted that these people would have delayed post-stress cardiovascular recovery. Thirty-eight male civil servants were tested, with participants divided into high and low SES groups according to employment grade. There were no differences between the groups at baseline. However there were significant differences in IL-6 and heart rate responses to stress. Stress induced increases in plasma IL-6 in all participants. However, in the low SES group, IL-6 continued to increase between 75 min and 2h post-stress, whereas IL-6 levels stabilised at 75 min in the high SES group. Heart rate increased to the same extent following stress in both groups, however by 2h post-stress, it had returned to baseline in 75% of the high SES group compared with only 38.1% of the low SES group. These results suggest that low SES people are less able to adapt to stress than their high SES counterparts. Prolonged stress-induced increases in IL-6 in low SES groups represents a novel mechanism potentially linking socioeconomic position and heart disease.

Fluorescent bioassays for toxic metals in milk and yoghurt

PubMed Central

2012-01-01

Background From a human health viewpoint, contaminated milk and its products could be a source of long-term exposure to toxic metals. Simple, inexpensive, and on-site assays would enable constant monitoring of their contents. Bioassays that can measure toxic metals in milk or yoghurt might reduce the risk. For this purpose, the green fluorescent protein (GFP)-tagged trans factors, ArsR-GFP and CadC-GFP, together with their cis elements were used to develop such bioassays. Results ArsR-GFP or CadC-GFP, which binds either toxic metal or DNA fragment including cis element, was directly mixed with cow’s milk or yoghurt within a neutral pH range. The fluorescence of GFP, which is reflected by the association/dissociation ratio between cis element and trans factor, significantly changed with increasing externally added As (III) or Cd (II) whereas smaller responses to externally added Pb (II) and Zn (II) were found. Preparation and dilution of whey fraction at low pH were essential to intrinsic zinc quantification using CadC-GFP. Using the extraction procedure and bioassay, intrinsic Zn (II) concentrations ranging from 1.4 to 4.8 mg/l for milk brands and from 1.2 to 2.9 mg/kg for yoghurt brands were determined, which correlated to those determined using inductively coupled plasma atomic emission spectroscopy. Conclusions GFP-tagged bacterial trans factors and cis elements can work in the neutralized whole composition and diluted whey fraction of milk and yoghurt. The feature of regulatory elements is advantageous for establishment of simple and rapid assays of toxic metals in dairy products. PMID:23098077

Fluorescent bioassays for toxic metals in milk and yoghurt.

PubMed

Siddiki, Mohammad Shohel Rana; Ueda, Shunsaku; Maeda, Isamu

2012-10-25

From a human health viewpoint, contaminated milk and its products could be a source of long-term exposure to toxic metals. Simple, inexpensive, and on-site assays would enable constant monitoring of their contents. Bioassays that can measure toxic metals in milk or yoghurt might reduce the risk. For this purpose, the green fluorescent protein (GFP)-tagged trans factors, ArsR-GFP and CadC-GFP, together with their cis elements were used to develop such bioassays. ArsR-GFP or CadC-GFP, which binds either toxic metal or DNA fragment including cis element, was directly mixed with cow's milk or yoghurt within a neutral pH range. The fluorescence of GFP, which is reflected by the association/dissociation ratio between cis element and trans factor, significantly changed with increasing externally added As (III) or Cd (II) whereas smaller responses to externally added Pb (II) and Zn (II) were found. Preparation and dilution of whey fraction at low pH were essential to intrinsic zinc quantification using CadC-GFP. Using the extraction procedure and bioassay, intrinsic Zn (II) concentrations ranging from 1.4 to 4.8 mg/l for milk brands and from 1.2 to 2.9 mg/kg for yoghurt brands were determined, which correlated to those determined using inductively coupled plasma atomic emission spectroscopy. GFP-tagged bacterial trans factors and cis elements can work in the neutralized whole composition and diluted whey fraction of milk and yoghurt. The feature of regulatory elements is advantageous for establishment of simple and rapid assays of toxic metals in dairy products.

Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material.

PubMed

Elsaka, Shaymaa E

2016-01-01

This study evaluated the effect of four different surface treatments methods on the shear bond strength (SBS) of ceramic and metal brackets to Vita Enamic (VE) CAD/CAM hybrid ceramic. A total of 240 plates (10 mm × 10 mm × 3 mm) were cut from VE ceramic blocks and divided into two groups. In each group, four subgroups were prepared by hydrofluoric acid (HF); phosphoric acid (H3PO4); diamond ceramic grinding bur; and silica coating using CoJet system (CJ). Maxillary central incisor metal (Victory Series) and ceramic (Clarity) brackets were bonded with light-cure composite and then stored in artificial saliva for 1 week and thermocycled. The SBS test was performed, and the failure types were classified with adhesive remnant index scores. Surface morphology of the ceramic was characterized after treatment using a scanning electron microscope. Data were analyzed using two-way ANOVA, Tukey HSD test, and Weibull analysis. SBS was significantly affected by the type of bracket and by type of treatment (P < 0.001). Specimens treated with CJ presented with significantly higher SBS compared to other groups (P < 0.05). Improvements in SBS values (MPa) were found in the following order: CJ > HF > Bur > H3PO4. Ceramic bracket showed higher SBS compared to metal bracket. Adhesive failures between the ceramic and composite resin were the predominant mode of failure in all groups. Surface treatment of VE CAD/CAM hybrid ceramic with silica coating enhanced the adhesion with ceramic and metal brackets.

Role of CadC and CadD in the 2,4-dichlorophenoxyacetic acid oxygenase system of Sphingomonas agrestis 58-1.

PubMed

Kijima, Kumiko; Mita, Hajime; Kawakami, Mitsuyasu; Amada, Kei

2018-02-02

In the present study, we confirm that 2,4-dichlorophenoxyacetic acid (2,4-D) oxygenase from Sphingomonas agrestis 58-1 belongs to the family of Rieske non-heme iron aromatic ring-hydroxylating oxygenases, which comprise a core enzyme (oxygenase), ferredoxin, and oxidoreductase. It has previously been shown that cadAB genes are necessary for the conversion of 2,4-D to 2,4-dichlorophenol; however, the respective roles of ferredoxin and oxidoreductase in the 2,4-D oxygenase system from S. agrestis 58-1 remain unknown. Using nucleotide sequence analysis of the plasmid pCADAB1 from Sphingomonas sp. ERG5, which degrades 4-chloro-2-methylphenoxyacetic acid and 2,4-D, Nielsen et al. identified orf95, upstream of cadA, and orf98, downstream of cadB, which were predicted and designated as cadD (oxidoreductase) and cadC (ferredoxin), respectively (Nielsen et al., PLoS One, 8, 1-9, 2013). These designations were the result of sequence analysis; therefore, we constructed an expression system of CadABC and CadABCD in Escherichia coli and assayed their enzyme activities. Our findings indicate that CadC is essential for the activity of 2,4-D oxygenase and CadD promotes CadABC activity in recombinant E. coli cells. Copyright © 2018 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Clinical presentation and management of stable coronary artery disease: insights from the international prospective CLARIFY registry - results from the Greek national cohort.

PubMed

Sbarouni, Eftihia; Voudris, Vassilis; Georgiadou, Panagiota; Hamilos, Michalis; Steg, P Gabriel; Fox, Kim M; Greenlaw, Nicola; Ferrari, Roberto; Vardas, Panos E

2014-01-01

Coronary artery disease (CAD) is highly prevalent worldwide, yet there is a paucity of data regarding the clinical characteristics and management of outpatients with stable CAD. In this paper, we report the baseline data of the Greek cohort and we compare our national data with the global results of the entire registry, as well as the results from the western European countries. CLARIFY is an international, prospective, observational, longitudinal registry of outpatients with stable CAD, defined as prior myocardial infarction or revascularization procedure, evidence of coronary stenosis >50%, or chest pain associated with proven myocardial ischemia. A total of 33,283 patients from 45 countries in 4 continents were enrolled between November 2009 and July 2010; of these, 14,726 were from western European countries (Austria, Belgium, Denmark, France, Germany, Greece, Ireland, Italy, Netherlands, Portugal, Spain, Switzerland and the United Kingdom) and 559 patients were enrolled in Greece. Compared to their counterparts in western Europe and the entire cohort, Greeks were younger (p<0.0001, p<0.0001, respectively), more predominantly male (p<0.0039, p<0.0001), with a higher body mass index (p<0.0002, p<0.0001) and a larger waist circumference (p<0.0001, p<0.0001), as well as a higher prevalence of family history of CAD (p<0.0008, 0.0005), hyperlipidemia (p<0.0001, p<0.0001) and smoking (p<0.0001, p<0.0001). Noninvasive testing (p<0.0001, p<0.0001, respectively) and coronary angiography (p<0.0001, 0.0013) along with surgical revascularization (CABG) (p<0.0001, 0.0088) were performed more often in Greece. Antiplatelets, b-blockers and lipid lowering medications were used to an equal extent in Greece as in the other two cohorts. There are substantial differences in demographics, clinical profiles and treatment in patients with stable CAD within the data set, which are also observed for Greek data. Interestingly, these differences are consistent in relation to the global as well as the western European data.

Current but not past smoking increases the risk of cardiac events: insights from coronary computed tomographic angiography

PubMed Central

Nakanishi, Rine; Berman, Daniel S.; Budoff, Matthew J.; Gransar, Heidi; Achenbach, Stephan; Al-Mallah, Mouaz; Andreini, Daniele; Cademartiri, Filippo; Callister, Tracy Q.; Chang, Hyuk-Jae; Cheng, Victor Y.; Chinnaiyan, Kavitha; Chow, Benjamin J.W.; Cury, Ricardo; Delago, Augustin; Hadamitzky, Martin; Hausleiter, Jörg; Feuchtner, Gudrun; Kim, Yong-Jin; Kaufmann, Philipp A.; Leipsic, Jonathon; Lin, Fay Y.; Maffei, Erica; Pontone, Gianluca; Raff, Gilbert; Shaw, Leslee J.; Villines, Todd C.; Dunning, Allison; Min, James K.

2015-01-01

Aims We evaluated coronary artery disease (CAD) extent, severity, and major adverse cardiac events (MACEs) in never, past, and current smokers undergoing coronary CT angiography (CCTA). Methods and results We evaluated 9456 patients (57.1 ± 12.3 years, 55.5% male) without known CAD (1588 current smokers; 2183 past smokers who quit ≥3 months before CCTA; and 5685 never smokers). By risk-adjusted Cox proportional-hazards models, we related smoking status to MACE (all-cause death or non-fatal myocardial infarction). We further performed 1:1:1 propensity matching for 1000 in each group evaluate event risk among individuals with similar age, gender, CAD risk factors, and symptom presentation. During a mean follow-up of 2.8 ± 1.9 years, 297 MACE occurred. Compared with never smokers, current and past smokers had greater atherosclerotic burden including extent of plaque defined as segments with any plaque (2.1 ± 2.8 vs. 2.6 ± 3.2 vs. 3.1 ± 3.3, P < 0.0001) and prevalence of obstructive CAD [1-vessel disease (VD): 10.6% vs. 14.9% vs. 15.2%, P < 0.001; 2-VD: 4.4% vs. 6.1% vs. 6.2%, P = 0.001; 3-VD: 3.1% vs. 5.2% vs. 4.3%, P < 0.001]. Compared with never smokers, current smokers experienced higher MACE risk [hazard ratio (HR) 1.9, 95% confidence interval (CI) 1.4–2.6, P < 0.001], while past smokers did not (HR 1.2, 95% CI 0.8–1.6, P = 0.35). Among matched individuals, current smokers had higher MACE risk (HR 2.6, 95% CI 1.6–4.2, P < 0.001), while past smokers did not (HR 1.3, 95% CI 0.7–2.4, P = 0.39). Similar findings were observed for risk of all-cause death. Conclusion Among patients without known CAD undergoing CCTA, current and past smokers had increased burden of atherosclerosis compared with never smokers; however, risk of MACE was heightened only in current smokers. PMID:25666322

Gender-specific research for emergency diagnosis and management of ischemic heart disease: proceedings from the 2014 Academic Emergency Medicine Consensus Conference Cardiovascular Research Workgroup.

PubMed

Safdar, Basmah; Nagurney, John T; Anise, Ayodola; DeVon, Holli A; D'Onofrio, Gail; Hess, Erik P; Hollander, Judd E; Legato, Mariane J; McGregor, Alyson J; Scott, Jane; Tewelde, Semhar; Diercks, Deborah B

2014-12-01

Coronary artery disease (CAD) is the most common cause of death for both men and women. However, over the years, emergency physicians, cardiologists, and other health care practitioners have observed varying outcomes in men and women with symptomatic CAD. Women in general are 10 to 15 years older than men when they develop CAD, but suffer worse postinfarction outcomes compared to age-matched men. This article was developed by the cardiovascular workgroup at the 2014 Academic Emergency Medicine (AEM) consensus conference to identify sex- and gender-specific gaps in the key themes and research questions related to emergency cardiac ischemia care. The workgroup had diverse stakeholder representation from emergency medicine, cardiology, critical care, nursing, emergency medical services, patients, and major policy-makers in government, academia, and patient care. We implemented the nominal group technique to identify and prioritize themes and research questions using electronic mail, monthly conference calls, in-person meetings, and Web-based surveys between June 2013 and May 2014. Through three rounds of nomination and refinement, followed by an in-person meeting on May 13, 2014, we achieved consensus on five priority themes and 30 research questions. The overarching themes were as follows: 1) the full spectrum of sex-specific risk as well as presentation of cardiac ischemia may not be captured by our standard definition of CAD and needs to incorporate other forms of ischemic heart disease (IHD); 2) diagnosis is further challenged by sex/gender differences in presentation and variable sensitivity of cardiac biomarkers, imaging, and risk scores; 3) sex-specific pathophysiology of cardiac ischemia extends beyond conventional obstructive CAD to include other causes such as microvascular dysfunction, takotsubo, and coronary artery dissection, better recognized as IHD; 4) treatment and prognosis are influenced by sex-specific variations in biology, as well as patient-provider communication; and 5) the changing definitions of pathophysiology call for looking beyond conventionally defined cardiovascular outcomes to patient-centered outcomes. These emergency care priorities should guide future clinical and basic science research and extramural funding in an area that greatly influences patient outcomes. © 2014 by the Society for Academic Emergency Medicine.

Edge strength of CAD/CAM materials.

PubMed

Pfeilschifter, Maria; Preis, Verena; Behr, Michael; Rosentritt, Martin

2018-05-16

To investigate the edge force of CAD/CAM materials as a function of (a) material, (b) thickness, and (c) distance from the margin. Materials intended for processing with CAD/CAM were investigated: eight resin composites, one resin-infiltrated ceramic, and a clinically proven lithiumdisilicate ceramic (reference). To measure edge force (that is, load to failure/crack), plates (d = 1 mm) were fixed and loaded with a Vickers diamond indenter (1 mm/min, Zwick 1446) at a distance of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm from the edge. Edge force was defined as a loading force at a distance of 0.5 mm. The type of failure was determined. To investigate the influence of the thickness, all data were determined on 1-mm and 2-mm plates. To test the influence of bonding and an underlying dentin, individual 1-mm plates were bonded to a 1-mm-thick dentin-like (concerning modulus of elasticity) resin composite. For the 1-mm plates, edge force varied between 64.4 ± 24.2 N (Shofu Block HC) and 183.2 ± 63.3 N (ceramic reference), with significant (p ≤ 0.001) differences between the materials. For the 2-mm plates, values between 129.2 ± 32.5 N (Lava Ultimate) and 230.3 ± 67.5 N (Cerasmart) were found. Statistical comparison revealed no significant differences (p > 0.109) between the materials. Brilliant Crios (p = 0.023), Enamic (p = 0.000), Shofu Blocks HC (p = 0.009), and Grandio Bloc (p = 0.002) showed significantly different edge force between the 1-mm- and 2-mm-thick plates. The failure pattern was either cracking, (severe) chipping, or fracture. Material, material thickness, and distance from the edge impact the edge force of CAD/CAM materials. CAD/CAM materials should be carefully selected on the basis of their individual edge force and performance during milling. Copyright © 2018 Elsevier Ltd. All rights reserved.

Quantifying alcohol-related emergency admissions in a UK tertiary referral hospital: a cross-sectional study of chronic alcohol dependency and acute alcohol intoxication.

PubMed

Vardy, J; Keliher, T; Fisher, J; Ritchie, F; Bell, C; Chekroud, M; Clarey, F; Blackwood, L; Barry, L; Paton, E; Clark, A; Connelly, R

2016-06-20

Alcohol is responsible for a proportion of emergency admissions to hospital, with acute alcohol intoxication and chronic alcohol dependency (CAD) implicated. This study aims to quantify the proportion of hospital admissions through our emergency department (ED) which were thought by the admitting doctor to be (largely or partially) a result of alcohol consumption. ED of a UK tertiary referral hospital. All ED admissions occurring over 14 weeks from 1 September to 8 December 2012. Data obtained for 5497 of 5746 admissions (95.67%). Proportion of emergency admissions related to alcohol as defined by the admitting ED clinician. Proportion of emergency admissions due to alcohol diagnosed with acute alcohol intoxication or CAD according to ICD-10 criteria. 1152 (21.0%, 95% CI 19.9% to 22.0%) of emergency admissions were thought to be due to alcohol. 74.6% of patients admitted due to alcohol had CAD, and significantly greater than the 26.4% with 'Severe' or 'Very Severe' acute alcohol intoxication (p<0.001). Admissions due to alcohol differed to admissions not due to alcohol being on average younger (45 vs 56 years, p<0.001) more often male (73.4% vs 45.1% males, p<0.001) and more likely to have a diagnosis synonymous with alcohol or related to recreational drug use, pancreatitis, deliberate self-harm, head injury, gastritis, suicidal ideation, upper gastrointestinal bleeds or seizures (p<0.001). An increase in admissions due to alcohol on Saturdays reflects a surge in admissions with acute alcohol intoxication above the weekly average (p=0.003). Alcohol was thought to be implicated in 21% of emergency admissions in this cohort. CAD is responsible for a significantly greater proportion of admissions due to alcohol than acute intoxication. Interventions designed to reduce alcohol-related admissions must incorporate measures to tackle CAD. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Biogas recirculation for simultaneous calcium removal and biogas purification within an expanded granular sludge bed system treating leachate.

PubMed

Luo, Jinghuan; Lu, Xueqin; Liu, Jianyong; Qian, Guangren; Lu, Yongsheng

2014-12-01

Biogas, generated from an expanded granular sludge bed (EGSB) reactor treating municipal solid waste (MSW) leachate, was recirculated for calcium removal from the leachate via a carbonation process with simultaneous biogas purification. Batch trials were performed to optimize the solution pH and imported biogas (CO2) for CaCO3 precipitation. With applicable pH of 10-11 obtained, continuous trials achieved final calcium concentrations of 181-375 mg/L (removal efficiencies≈92.8-96.5%) in the leachate and methane contents of 87.1-91.4% (purification efficiencies≈65.4-82.2%) in the biogas. Calcium-balance study indicates that 23-986 mg Ca/d was released from the bio-system under the carbonized condition where CaCO3 precipitating was moved outside the bioreactor, whereas 7918-9517 mg Ca/d was trapped into the system for the controlled one. These findings demonstrate that carbonation removal of calcium by biogas recirculation could be a promising alternative to pretreat calcium-rich MSW leachate and synergistically to improve methane content. Copyright © 2014 Elsevier Ltd. All rights reserved.

Association of rs662799 in APOA5 with CAD in Chinese Han population.

PubMed

Chen, Hua; Ding, Shifang; Zhou, Mi; Wu, Xiayin; Liu, Xi; Wu, Yun; Liu, Dechao

2018-01-08

CAD (Coronary Artery Disease) is a complex disease that influenced by various environmental and genetic factors. Previous studies have found many single nucleotide polymorphisms (SNPs) associated with the risk of CAD occurrence. However, the results are inconsistent. In this study, we aim to investigate genetic etiology in Chinese Han population by analysis of 7 SNPs in lipid metabolism pathway that previously has been reported to be associated with CAD. A total of 631 samples were used in this study, including 435 CAD cases and 196 normal healthy controls. SNP genotyping were conducted via multiplex PCR amplifying followed by NGS (next-generation sequencing). Rs662799 in APOA5 (Apolipoprotein A5) gene was associated with CAD in Chinese Han population (Odds-ratio = 1.374, P-value = 0.03). No significant association was observed between the rest of SNPs and CAD. Stratified association analysis revealed rs5882 was associated with CAD in non-hypertension group (Odds-ratio = 1.593, P-value = 0.023). Rs1800588 was associated with CAD in smoking group (Odds-ratio = 1.603, P-value = 0.035). The minor allele of rs662799 was the risk factor of CAD occurrences in Chinese Han population.

Brain volume and cognitive function in patients with revascularized coronary artery disease.

PubMed

Ottens, Thomas H; Hendrikse, Jeroen; Nathoe, Hendrik M; Biessels, Geert Jan; van Dijk, Diederik

2017-03-01

The pathogenesis of cognitive dysfunction in patients with CAD remains unclear. CAD is associated with brain atrophy and specific lesions. Detailed knowledge about the association of brain volume measured with MRI, and cognitive function in patients with CAD is lacking. We therefore investigated brain volume and cognitive function in patients with revascularized coronary artery disease (CAD), and controls without CAD. Brain MRI scans and cognitive tests from patients with CAD were compared with data from control subjects without CAD. Cognitive performance was assessed with the Rey Auditory Verbal Learning (short term memory) and Trailmaking (divided attention) tests. Multivariable regression analysis was used to study associations between CAD, brain volume and cognitive function. A total of 102 patients with CAD and 48 control subjects were included. Level of education and age were comparable between the groups. Compared with controls, patients with CAD had smaller total brain volume (expressed as fraction of intracranial volume) [%ICV, mean (SD), 0.78 (0.03) vs 0.80 (0.02), P=0.001] and larger volume of non-ventricular cerebrospinal fluid [%ICV, median (IQR) 0.19 (0.18 to 0.21) vs 0.18 (0.17 to 0.20), P=0.001]. Patients in the CAD group had poorer cognitive function [mean (SD) Z-score -0.16 (0.72) vs 0.41 (0.69), P<0.01]. Multivariable regression showed that CAD, higher age, lower level of education and greater cerebrospinal fluid volume were independent predictors of poorer cognitive function. CAD patients had a smaller total brain volume and poorer cognitive function than controls. Greater volume of cerebrospinal fluid was an independent predictor of poorer cognitive function. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Association of obstructive sleep apnea with homocystein, nitric oxide and total antioxidant capacity levels in patients with or without coronary artery disease.

PubMed

Ortaç Ersoy, Ebru; Fırat, Hikmet; Akaydın, Sevgi; Özkan, Yeşim; Durusu, Mine; Darılmaz Yüce, Gülbahar; Ergün, Recai; Topeli, Arzu; Ardıç, Sadık

2014-01-01

Obstructive sleep apnea (OSA) is associated with cardiovascular morbidity and mortality. Deficiency of nitric oxide (NO) and plasma levels of homocystein have been implicated in the pathogenesis of cardiovascular disease. OSA results in oxygen desaturation and arousal from sleep. Free oxygen radicals can be produced by hypoxia-reoxygenation. To test for the hypothesis that OSA is associated with cardiovascular morbidity, we investigated levels of homocystein, NO and total antioxidant capacity in OSA patients with and without coronary artery disease (CAD) in comparison with normal subjects and patients with CAD without OSA. Polysomnography was performed in 27 patients who had a myocardial infarction and in 25 patients without evidence of CAD. Patients were grouped according their polysomnography results as OSA with CAD (group 1), OSA without CAD (group 2), CAD (group 3), and normal (group 4) . Levels of homocystein, NO and total antioxidant capacity were determined after an overnight fasting. Data were analysed with parametric and non parametric statistical tests. According to apnea-hypopnea index (AHI) 44.4% of CAD patients were OSA. After polysomnographic evaluation, the patients were re-distributed as follows: OSA with CAD (n= 12), OSA without CAD (n= 14), CAD (n= 15), and normal (n= 11). Homocystein levels were higher in 3 groups compared to controls. AHI, MDI and desaturation time was higher in three -vessel disease compared to one and two- vessel diseases (p< 0.05). NO levels were correlated with the period of oxygen desaturation (r: -0.45, p= 0.031). The antioxidant capacity did not differ between OSA and healthy groups. OSA is frequent in CAD. AHI, MDI and desaturation time are higher in patients with severe CAD. It is important to evaluate OSA patients for CAD.

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

PubMed Central

ABDULLAH, Adil Othman; TSITROU, Effrosyni A; POLLINGTON, Sarah

2016-01-01

ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (P<0.001). The average internal fit was: VITA CAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p<0.001). However, the mode of fracture showed no differences between the groups (p>0.05). Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns. PMID:27383707

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

PubMed

Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

2016-01-01

This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (P<0.001). The average internal fit was: VITA CAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p<0.001). However, the mode of fracture showed no differences between the groups (p>0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Environmental stresses of field growth allow cinnamyl alcohol dehydrogenase-deficient Nicotiana attenuata plants to compensate for their structural deficiencies.

PubMed

Kaur, Harleen; Shaker, Kamel; Heinzel, Nicolas; Ralph, John; Gális, Ivan; Baldwin, Ian T

2012-08-01

The organized lignocellulosic assemblies of cell walls provide the structural integrity required for the large statures of terrestrial plants. Silencing two CINNAMYL ALCOHOL DEHYDROGENASE (CAD) genes in Nicotiana attenuata produced plants (ir-CAD) with thin, red-pigmented stems, low CAD and sinapyl alcohol dehydrogenase activity, low lignin contents, and rubbery, structurally unstable stems when grown in the glasshouse (GH). However, when planted into their native desert habitat, ir-CAD plants produced robust stems that survived wind storms as well as the wild-type plants. Despite efficient silencing of NaCAD transcripts and enzymatic activity, field-grown ir-CAD plants had delayed and restricted spread of red stem pigmentation, a color change reflecting blocked lignification by CAD silencing, and attained wild-type-comparable total lignin contents. The rubbery GH phenotype was largely restored when field-grown ir-CAD plants were protected from wind, herbivore attack, and ultraviolet B exposure and grown in restricted rooting volumes; conversely, it was lost when ir-CAD plants were experimentally exposed to wind, ultraviolet B, and grown in large pots in growth chambers. Transcript and liquid chromatography-electrospray ionization-time-of-flight analysis revealed that these environmental stresses enhanced the accumulation of various phenylpropanoids in stems of field-grown plants; gas chromatography-mass spectrometry and nuclear magnetic resonance analysis revealed that the lignin of field-grown ir-CAD plants had GH-grown comparable levels of sinapaldehyde and syringaldehyde cross-linked into their lignins. Additionally, field-grown ir-CAD plants had short, thick stems with normal xylem element traits, which collectively enabled field-grown ir-CAD plants to compensate for the structural deficiencies associated with CAD silencing. Environmental stresses play an essential role in regulating lignin biosynthesis in lignin-deficient plants.

Environmental Stresses of Field Growth Allow Cinnamyl Alcohol Dehydrogenase-Deficient Nicotiana attenuata Plants to Compensate for their Structural Deficiencies1[C][W][OA

PubMed Central

Kaur, Harleen; Shaker, Kamel; Heinzel, Nicolas; Ralph, John; Gális, Ivan; Baldwin, Ian T.

2012-01-01

The organized lignocellulosic assemblies of cell walls provide the structural integrity required for the large statures of terrestrial plants. Silencing two CINNAMYL ALCOHOL DEHYDROGENASE (CAD) genes in Nicotiana attenuata produced plants (ir-CAD) with thin, red-pigmented stems, low CAD and sinapyl alcohol dehydrogenase activity, low lignin contents, and rubbery, structurally unstable stems when grown in the glasshouse (GH). However, when planted into their native desert habitat, ir-CAD plants produced robust stems that survived wind storms as well as the wild-type plants. Despite efficient silencing of NaCAD transcripts and enzymatic activity, field-grown ir-CAD plants had delayed and restricted spread of red stem pigmentation, a color change reflecting blocked lignification by CAD silencing, and attained wild-type-comparable total lignin contents. The rubbery GH phenotype was largely restored when field-grown ir-CAD plants were protected from wind, herbivore attack, and ultraviolet B exposure and grown in restricted rooting volumes; conversely, it was lost when ir-CAD plants were experimentally exposed to wind, ultraviolet B, and grown in large pots in growth chambers. Transcript and liquid chromatography-electrospray ionization-time-of-flight analysis revealed that these environmental stresses enhanced the accumulation of various phenylpropanoids in stems of field-grown plants; gas chromatography-mass spectrometry and nuclear magnetic resonance analysis revealed that the lignin of field-grown ir-CAD plants had GH-grown comparable levels of sinapaldehyde and syringaldehyde cross-linked into their lignins. Additionally, field-grown ir-CAD plants had short, thick stems with normal xylem element traits, which collectively enabled field-grown ir-CAD plants to compensate for the structural deficiencies associated with CAD silencing. Environmental stresses play an essential role in regulating lignin biosynthesis in lignin-deficient plants. PMID:22645069

Severity of erectile dysfunction is highly correlated with the syntax score in patients undergoing coronariography

PubMed Central

Andrade, Weslley Santiago; Oliveira, Paulo; Laydner, Humberto; Ferreira, Eduardo Jose Pereira; Barreto, Jose Augusto Soares

2016-01-01

ABSTRACT Objective To investigate the association between the severity of erectile dysfunction (ED) and coronary artery disease (CAD) in men undergoing coronary angiography for angina or acute myocardial infarct (AMI). Material and Methods We studied 132 males who underwent coronary angiography for first time between January and November 2010. ED severity was assessed by the international index of erectile function (IIEF-5) and CAD severity was assessed by the Syntax score. Patients with CAD (cases) and without CAD (controls) had their IIEF-5 compared. In the group with CAD, their IIEF-5 scores were compared to their Syntax score results. Results We identified 86 patients with and 46 without CAD. The IIEF-5 score of the group without CAD (22.6±0.8) was significantly higher than the group with CAD (12.5±0.5; p<0.0001). In patients without ED, the Syntax score average was 6.3±3.5, while those with moderate or severe ED had a mean Syntax score of 39.0±11.1. After adjustment, ED was independently associated to CAD, with an odds ratio of 40.6 (CI 95%, 14.3-115.3, p<0.0001). The accuracy of the logistic model to correctly identify presence or absence of CAD was 87%, with 92% sensitivity and 78% specificity. The average time that ED was present in patients with CAD was 38.8±2.3 months before coronary symptoms, about twice as high as patients without CAD (18.0±5.1 months). Conclusions ED severity is strongly and independently correlated with CAD complexity, as assessed by the Syntax score in patients undergoing coronariography for evaluation of new onset coronary symptoms. PMID:27136478

Monolithic and bi-layer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue.

PubMed

Schultheis, Stefan; Strub, Joerg R; Gerds, Thomas A; Guess, Petra C

2013-06-01

The authors analyzed the effect of fatigue on the survival rate and fracture load of monolithic and bi-layer CAD/CAM lithium-disilicate posterior three-unit fixed dental prostheses (FDPs) in comparison to the metal-ceramic gold standard. The authors divided 96 human premolars and molars into three equal groups. Lithium-disilicate ceramic (IPS-e.max-CAD) was milled with the CEREC-3-system in full-anatomic FDP dimensions (monolithic: M-LiCAD) or as framework (Bi-layer: BL-LiCAD) with subsequent hand-layer veneering. Metal-ceramic FDPs (MC) served as control. Single-load-to-failure tests were performed before and after mouth-motion fatigue. No fracture failures occurred during fatigue. Median fracture loads in [N], before and after fatigue were, respectively, as follows: M-LiCAD, 1,298/1,900; BL-LiCAD, 817/699; MC, 1,966/1,818. M-LiCAD and MC FPDs revealed comparable fracture loads and were both significantly higher than BL-LiCAD. M-LiCAD and BL-LiCAD both failed from core/veneer bulk fracture within the connector area. MC failures were limited to ceramic veneer fractures exposing the metal core. Fatigue had no significant effect on any group. Posterior monolithic CAD/CAM fabricated lithium-disilicate FPDs were shown to be fracture resistant with failure load results comparable to the metal-ceramic gold standard. Clinical investigations are needed to confirm these promising laboratory results. Monolithic CAD/CAM fabricated lithium-disilicate FDPs appeared to be a reliable treatment alternative for the posterior load-bearing area, whereas FDPs in bi-layer configuration were susceptible to low load fracture failure.

Pneumonia and influenza hospitalizations among children under 5 years of age in Suzhou, China, 2005-2011.

PubMed

Zhang, Xiyan; Zhang, Jun; Chen, Liling; Feng, Luzhao; Yu, Hongjie; Zhao, Genming; Zhang, Tao

2017-01-01

The disease burden of influenza among children in China has not been well described. To estimate the influenza-associated excess hospitalization rate and compare the hospitalization length and costs between pneumonia and influenza (P&I) and other community-acquired diseases (CAD) in Suzhou, China. We retrospectively collected hospital discharge data on pediatric patients' discharge diagnosis, hospital costs, and length of hospital stay in Suzhou. P&I hospitalization was defined as a primary discharge diagnosis of pneumonia and influenza disease (ICD-10 codes J09-J18). Other CAD were common community-acquired diseases among children. Negative binomial regression models were used to estimate the weekly P&I hospitalizations in Suzhou. Excess P&I hospitalizations due to influenza were calculated as the difference in P&I hospitalizations between the epidemic period and the baseline period. Baseline was defined as when the influenza-positive rates were <5% for two consecutive weeks. From October 2005 to September 2011, we identified a total of 180 091 all-cause hospitalizations among children <5 years of age in Suzhou City. The rates of P&I and influenza-associated excess hospitalizations were highest in the 2009-2010 pandemic and 2010-2011 post-pandemic seasons. Infants <6 months of age had the highest P&I hospitalization rates, the longest hospital stays (7.5-8.0 days), and the highest hospitalization costs for P&I. Compared with other CAD, children admitted for P&I had longer hospital stays and higher hospitalization costs. The influenza-associated P&I hospitalization rates and economic burden were high among children. Targeted influenza prevention and control strategies for young children in Suzhou may reduce the influenza-associated hospitalizations in this age group. © 2016 The Authors. Influenza and Other Respiratory Viruses Published by John Wiley & Sons Ltd.

Comparison of plasma adiponectin & certain inflammatory markers in angiographically proven coronary artery disease patients with & without diabetes – A study from India

PubMed Central

Kumpatla, Satyavani; Karuppiah, Kirubakaran; Immaneni, Sathyamurthy; Muthukumaran, Parthiban; Krishnan, Jayanthi; Narayanamoorthy, Srinivasan Kanthallu; Viswanathan, Vijay

2014-01-01

Background & objectives: The association between adiponectin and risk of cardiovascular disease is well known. The aim of the present study was to evaluate adiponectin and certain inflammatory markers and to determine the correlations between them in angiographically proven coronary artery disease (CAD) in subjects with and without diabetes. Methods: A total of 180 subjects who underwent coronary angiography for symptoms suggestive of CAD were categorised into groups based on their diabetes and/or CAD status: group1 (non-diabetic non-CAD); group2 (non-diabetic CAD); group3 (diabetic non-CAD) and group4 (diabetic CAD). Adiponectin, tumour necrosis factor α (TNF-α) and soluble form of E-selectin (sE-selectin) were estimated using quantitative sandwich enzyme immunoassay and high sensitive C-reactive protein (hsCRP) by particle enhanced immunoturbidimetric method. Results: Adiponectin levels were significantly lower in subjects with either diabetes or CAD and were much lower in subjects who had both. hsCRP was elevated in CAD and diabetes but did not differ significantly between groups. sE-selectin and TNF-α levels were elevated in CAD. Adiponectin negatively correlated with age, glucose, sE-selectin, total and LDL cholesterol. hsCRP correlated with BMI, sE-selectin and urea. sE-selectin correlated with BMI, triglycerides and VLDL cholesterol, whereas TNF-α correlated with fasting plasma glucose. In the logistic regression analysis, adiponectin had a significant inverse association with CAD. sE-selectin and TNF-α also showed significant independent association with CAD. Interpretation & conclusions: Adiponectin and other inflammatory markers such as sE-selectin and TNF-α showed a significant association with CAD. Hence, early assessment of such markers can help to identify high risk patients, and to reduce the inflammatory component of diabetes and CAD. PMID:25109718

Reactive Oxygen Metabolites are Closely Associated With the Diagnosis and Prognosis of Coronary Artery Disease

PubMed Central

Hirata, Yoshihiro; Yamamoto, Eiichiro; Tokitsu, Takanori; Kusaka, Hiroaki; Fujisue, Koichiro; Kurokawa, Hirofumi; Sugamura, Koichi; Maeda, Hirofumi; Tsujita, Kenichi; Kaikita, Koichi; Hokimoto, Seiji; Sugiyama, Seigo; Ogawa, Hisao

2015-01-01

Background Reactive oxygen species (ROS) are associated with development of coronary artery disease (CAD). However, there's no useful biomarker of ROS in CAD. Methods and Results We recruited 395 consecutive CAD patients who were performed coronary angiography (262 male and 133 female, age 70.2±10), and we measured serum derivatives of reactive oxidative metabolites (DROM) were measured. Two hundred twenty‐seven non‐CAD patients were also enrolled. We performed follow‐up study in these 395 CAD patients and case‐control study after risk factor and 1:1 pair matching (both, n=163). As subgroup analysis, DROM were also measured at the aortic root and the coronary sinus in 59 CAD patients. DROM were significantly higher in CAD patients (n=163, median [inter‐quartile range, IQR]=338 [302 to 386]) than in risk factor‐matched non‐CAD patients (n=163, 311 [282 to 352.5], effect size=0.33, P<0.001). During a mean follow‐up period of 20 months of 395 CAD patients, 83 cardiovascular events were recorded. Kaplan‐Meier analysis showed a higher probability of cardiovascular events in the high‐DROM group (>346 U.CARR) than in the low‐DROM group (≤346 U.CARR) (P=0.001 [log‐rank test]). Multivariate Cox hazard analysis identified ln‐DROM as an independent predictor for cardiovascular events (hazard ratio: 10.8, 95% confidence interval: 2.76 to 42.4, P=0.001). The transcardiac gradient of DROM was significantly higher in CAD patients than in non‐CAD patients (−2.0 [−9.0 to 9.0] versus 8 [−8.0 to 28.3], effect size=0.21, P=0.04), indicating that DROM production in coronary circulation is associated with development of CAD. Conclusion DROM are increased in CAD patients and associated with future cardiovascular events. DROM might provide clinical benefits for risk stratification of CAD. Clinical Trial Registration URL: http://www.umin.ac.jp/ctr/. Unique identifier: UMIN000012990. PMID:25630910

Simulation Assessment Validation Environment (SAVE). Software User’s Manual

DTIC Science & Technology

2000-09-01

requirements and decisions are made. The integration is leveraging work from other DoD organizations so that high -end results are attainable much faster than...planning through the modeling and simulation data capture and visualization process. The planners can complete the manufacturing process plan with a high ...technologies. This tool is also used to perform “ high level” factory process simulation prior to full CAD model development and help define feasible

A rule based computer aided design system

NASA Technical Reports Server (NTRS)

Premack, T.

1986-01-01

A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

A comparison of computer-assisted detection (CAD) programs for the identification of colorectal polyps: performance and sensitivity analysis, current limitations and practical tips for radiologists.

PubMed

Bell, L T O; Gandhi, S

2018-06-01

To directly compare the accuracy and speed of analysis of two commercially available computer-assisted detection (CAD) programs in detecting colorectal polyps. In this retrospective single-centre study, patients who had colorectal polyps identified on computed tomography colonography (CTC) and subsequent lower gastrointestinal endoscopy, were analysed using two commercially available CAD programs (CAD1 and CAD2). Results were compared against endoscopy to ascertain sensitivity and positive predictive value (PPV) for colorectal polyps. Time taken for CAD analysis was also calculated. CAD1 demonstrated a sensitivity of 89.8%, PPV of 17.6% and mean analysis time of 125.8 seconds. CAD2 demonstrated a sensitivity of 75.5%, PPV of 44.0% and mean analysis time of 84.6 seconds. The sensitivity and PPV for colorectal polyps and CAD analysis times can vary widely between current commercially available CAD programs. There is still room for improvement. Generally, there is a trade-off between sensitivity and PPV, and so further developments should aim to optimise both. Information on these factors should be made routinely available, so that an informed choice on their use can be made. This information could also potentially influence the radiologist's use of CAD results. Copyright © 2018 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Automated bone age assessment of older children using the radius

NASA Astrophysics Data System (ADS)

Tsao, Sinchai; Gertych, Arkadiusz; Zhang, Aifeng; Liu, Brent J.; Huang, Han K.

2008-03-01

The Digital Hand Atlas in Assessment of Skeletal Development is a large-scale Computer Aided Diagnosis (CAD) project for automating the process of grading Skeletal Development of children from 0-18 years of age. It includes a complete collection of 1,400 normal hand X-rays of children between the ages of 0-18 years of age. Bone Age Assessment is used as an index of skeletal development for detection of growth pathologies that can be related to endocrine, malnutrition and other disease types. Previous work at the Image Processing and Informatics Lab (IPILab) allowed the bone age CAD algorithm to accurately assess bone age of children from 1 to 16 (male) or 14 (female) years of age using the Phalanges as well as the Carpal Bones. At the older ages (16(male) or 14(female) -19 years of age) the Phalanges as well as the Carpal Bones are fully developed and do not provide well-defined features for accurate bone age assessment. Therefore integration of the Radius Bone as a region of interest (ROI) is greatly needed and will significantly improve the ability to accurately assess the bone age of older children. Preliminary studies show that an integrated Bone Age CAD that utilizes the Phalanges, Carpal Bones and Radius forms a robust method for automatic bone age assessment throughout the entire age range (1-19 years of age).

Method of development of the program of forming of parametrical drawings of details in the AutoCAD software product

NASA Astrophysics Data System (ADS)

Alshakova, E. L.

2017-01-01

The program in the AutoLISP language allows automatically to form parametrical drawings during the work in the AutoCAD software product. Students study development of programs on AutoLISP language with the use of the methodical complex containing methodical instructions in which real examples of creation of images and drawings are realized. Methodical instructions contain reference information necessary for the performance of the offered tasks. The method of step-by-step development of the program is the basis for training in programming on AutoLISP language: the program draws elements of the drawing of a detail by means of definitely created function which values of arguments register in that sequence in which AutoCAD gives out inquiries when performing the corresponding command in the editor. The process of the program design is reduced to the process of step-by-step formation of functions and sequence of their calls. The author considers the development of the AutoLISP program for the creation of parametrical drawings of details, the defined design, the user enters the dimensions of elements of details. These programs generate variants of tasks of the graphic works performed in educational process of "Engineering graphics", "Engineering and computer graphics" disciplines. Individual tasks allow to develop at students skills of independent work in reading and creation of drawings, as well as 3D modeling.

Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques.

PubMed

Papadiochou, Sofia; Pissiotis, Argirios L

2018-04-01

The comparative assessment of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and other fabrication techniques pertaining to marginal adaptation should be documented. Limited evidence exists on the effect of restorative material on the performance of a CAD-CAM system relative to marginal adaptation. The purpose of this systematic review was to investigate whether the marginal adaptation of CAD-CAM single crowns, fixed dental prostheses, and implant-retained fixed dental prostheses or their infrastructures differs from that obtained by other fabrication techniques using a similar restorative material and whether it depends on the type of restorative material. An electronic search of English-language literature published between January 1, 2000, and June 30, 2016, was conducted of the Medline/PubMed database. Of the 55 included comparative studies, 28 compared CAD-CAM technology with conventional fabrication techniques, 12 contrasted CAD-CAM technology and copy milling, 4 compared CAD-CAM milling with direct metal laser sintering (DMLS), and 22 investigated the performance of a CAD-CAM system regarding marginal adaptation in restorations/infrastructures produced with different restorative materials. Most of the CAD-CAM restorations/infrastructures were within the clinically acceptable marginal discrepancy (MD) range. The performance of a CAD-CAM system relative to marginal adaptation is influenced by the restorative material. Compared with CAD-CAM, most of the heat-pressed lithium disilicate crowns displayed equal or smaller MD values. Slip-casting crowns exhibited similar or better marginal accuracy than those fabricated with CAD-CAM. Cobalt-chromium and titanium implant infrastructures produced using a CAD-CAM system elicited smaller MD values than zirconia. The majority of cobalt-chromium restorations/infrastructures produced by DMLS displayed better marginal accuracy than those fabricated with the casting technique. Compared with copy milling, the majority of zirconia restorations/infrastructures produced by CAD-CAM milling exhibited better marginal adaptation. No clear conclusions can be drawn about the superiority of CAD-CAM milling over the casting technique and DMLS regarding marginal adaptation. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Role of Computer Aided Diagnosis (CAD) in the detection of pulmonary nodules on 64 row multi detector computed tomography

PubMed Central

Prakashini, K; Babu, Satish; Rajgopal, KV; Kokila, K Raja

2016-01-01

Aims and Objectives: To determine the overall performance of an existing CAD algorithm with thin-section computed tomography (CT) in the detection of pulmonary nodules and to evaluate detection sensitivity at a varying range of nodule density, size, and location. Materials and Methods: A cross-sectional prospective study was conducted on 20 patients with 322 suspected nodules who underwent diagnostic chest imaging using 64-row multi-detector CT. The examinations were evaluated on reconstructed images of 1.4 mm thickness and 0.7 mm interval. Detection of pulmonary nodules, initially by a radiologist of 2 years experience (RAD) and later by CAD lung nodule software was assessed. Then, CAD nodule candidates were accepted or rejected accordingly. Detected nodules were classified based on their size, density, and location. The performance of the RAD and CAD system was compared with the gold standard that is true nodules confirmed by consensus of senior RAD and CAD together. The overall sensitivity and false-positive (FP) rate of CAD software was calculated. Observations and Results: Of the 322 suspected nodules, 221 were classified as true nodules on the consensus of senior RAD and CAD together. Of the true nodules, the RAD detected 206 (93.2%) and 202 (91.4%) by the CAD. CAD and RAD together picked up more number of nodules than either CAD or RAD alone. Overall sensitivity for nodule detection with the CAD program was 91.4%, and FP detection per patient was 5.5%. The CAD showed comparatively higher sensitivity for nodules of size 4–10 mm (93.4%) and nodules in hilar (100%) and central (96.5%) location when compared to RAD's performance. Conclusion: CAD performance was high in detecting pulmonary nodules including the small size and low-density nodules. CAD even with relatively high FP rate, assists and improves RAD's performance as a second reader, especially for nodules located in the central and hilar region and for small nodules by saving RADs time. PMID:27578931

Automated image-based colon cleansing for laxative-free CT colonography computer-aided polyp detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linguraru, Marius George; Panjwani, Neil; Fletcher, Joel G.

2011-12-15

Purpose: To evaluate the performance of a computer-aided detection (CAD) system for detecting colonic polyps at noncathartic computed tomography colonography (CTC) in conjunction with an automated image-based colon cleansing algorithm. Methods: An automated colon cleansing algorithm was designed to detect and subtract tagged-stool, accounting for heterogeneity and poor tagging, to be used in conjunction with a colon CAD system. The method is locally adaptive and combines intensity, shape, and texture analysis with probabilistic optimization. CTC data from cathartic-free bowel preparation were acquired for testing and training the parameters. Patients underwent various colonic preparations with barium or Gastroview in divided dosesmore » over 48 h before scanning. No laxatives were administered and no dietary modifications were required. Cases were selected from a polyp-enriched cohort and included scans in which at least 90% of the solid stool was visually estimated to be tagged and each colonic segment was distended in either the prone or supine view. The CAD system was run comparatively with and without the stool subtraction algorithm. Results: The dataset comprised 38 CTC scans from prone and/or supine scans of 19 patients containing 44 polyps larger than 10 mm (22 unique polyps, if matched between prone and supine scans). The results are robust on fine details around folds, thin-stool linings on the colonic wall, near polyps and in large fluid/stool pools. The sensitivity of the CAD system is 70.5% per polyp at a rate of 5.75 false positives/scan without using the stool subtraction module. This detection improved significantly (p = 0.009) after automated colon cleansing on cathartic-free data to 86.4% true positive rate at 5.75 false positives/scan. Conclusions: An automated image-based colon cleansing algorithm designed to overcome the challenges of the noncathartic colon significantly improves the sensitivity of colon CAD by approximately 15%.« less

Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements

PubMed Central

Nobuaki, ARAO; Keiichi, YOSHIDA; Takashi, SAWASE

2015-01-01

ABSTRACT Objective The study aimed to evaluate effects of air abrasion with alumina or glass beads on bond strengths of resin cements to CAD/CAM composite materials. Material and Methods CAD/CAM composite block materials [Cerasmart (CS) and Block HC (BHC)] were pretreated as follows: (a) no treatment (None), (b) application of a ceramic primer (CP), (c) alumina-blasting at 0.2 MPa (AB), (d) AB followed by CP (AB+CP), and (e) glass-beads blasting at 0.4 MPa (GBB) followed by CP (GBB+CP). The composite specimens were bonded to resin composite disks using resin cements [G-CEM Cerasmart (GCCS) and ResiCem (RC)]. The bond strengths after 24 h (TC 0) and after thermal cycling (TC 10,000 at 4–60°C) were measured by shear tests. Three-way ANOVA and the Tukey compromise post hoc tests were used to analyze statistically significant differences between groups (α=0.05). Results For both CAD/CAM composite materials, the None group exhibited a significant decrease in bond strength after TC 10,000 (p<0.05). AB showed significantly higher bond strength after TC 10,000 than the None group, while CP did not (p<0.05). GBB exhibited smaller surface defects than did AB; however, their surface roughnesses were not significantly different (p>0.05). The AB+CP group showed a significantly higher bond strength after TC 10,000 than did the AB group for RC (p<0.05), but not for GCCS. The GBB+CP group showed the highest bond strength for both thermal cyclings (p<0.05). Conclusions Air abrasion with glass beads was more effective in increasing bond durability between the resin cements and CAD/CAM composite materials than was using an alumina powder and a CP. PMID:26814465

Marginal adaptation of full-coverage CAD/CAM restorations: in vitro study using a non-destructive method.

PubMed

Romeo, E; Iorio, M; Storelli, S; Camandona, M; Abati, S

2009-03-01

Marginal fit of full-coverage crowns is a major requirement for long term success of this kind of restorations. The purpose of the study was to verify the marginal adaptation of computer assisted design (CAD)/computer assisted manufacturing (CAM) crowns on prepared teeth and on plaster dies. Four couples of materials: zirconia-ceramic veneering (DC-Zircon, DCS Dental, Allschwill, CH/Cercon S, Degussa, DeguDent GmbH, Hanau, Germany), fiber-reinforced composite-composite veneering (DC-Tell, DCS Dental/Gradia, GC Europe, LEuven, Belgium), titanium-ceramic veneering (DC Titan, DCS Dental/Tikrom, Orotig, Verona, Italy) and titanium-composite veneering (DC Titan, DCS Dental/Gradia, GC Europe) were evaluated following the guidelines provided by ADA specific #8. Five crowns were fabricated for each material. Marginal gap values were measured at four points (0 degrees, 90 degrees, 180 degrees and 270 degrees starting from the centre of the vestibular surface) around the finishing line, on prepared teeth and on plaster dies at each step of the fabrication process. Digital photographs were taken at each reference point and a computer software was used to measure the amount of marginal discrepancy in microm. Statistical analysis was performed using t test at 95 percent confidence interval. All the tested materials, except for fiber-reinforced composite, show a marginal adaptation within the limits of ADA specification (25-40 microm). The application of veneering material causes decay in marginal adaptation, except for fiber-reinforced composite. Within the limitations of this study, it was concluded that marginal fit of CAD/CAM restoration is within the limits considered clinically acceptable by ADA specification #8. From the results of this in vitro study, it can be stated that CAD/CAM crowns produced with DCS system show a marginal adaptation within the limits of ADA specific #8, therefore milled CAD/CAM crowns can be considered a good alternative to more traditional waxing-investing-casting technique.

The Effect of ACE I/D Polymorphisms Alone and With Concomitant Risk Factors on Coronary Artery Disease.

PubMed

Amara, Ahmed; Mrad, Meriem; Sayeh, Aicha; Lahideb, Dhaker; Layouni, Samy; Haggui, Abdeddayem; Fekih-Mrissa, Najiba; Haouala, Habib; Nsiri, Brahim

2018-01-01

Coronary artery disease (CAD), also known as atherosclerotic heart disease, is a leading cause of mortality and morbidity throughout the world. The role of insertion/deletion (I/D) polymorphisms of the angiotensin-converting enzyme (ACE) gene in the etiology of CAD remains to be more completely clarified. The aim of this study was to determine the role of the ACE I/D polymorphism in patients with CAD and to study the association together with traditional risk factors in assessing the risk of CAD. Our study population included 145 Tunisian patients with symptomatic CAD and a control group of 300 people matched for age and sex. All participants in the study were genotyped for the ACE I/D polymorphisms obtained by polymerase chain reaction amplification on genomic DNA. Our analysis showed that the ACE D allele frequency ( P < 10 -3 ; odds ratio [OR] = 5.2; 95% confidence interval [CI] = 3.6-7.6) and DD genotype ( P < 10 -3 ; OR = 6.8; 95% CI = 4.4-10) are significantly more prevalent among patients with CAD than in controls and may be predisposing to CAD. We further found that the risk of CAD is greatly potentiated by several concomitant risk factors (smoking, diabetes, hypertension, dyslipidemia, and a family history of CAD). The ACE D allele may be predictive in individuals who may be at risk of developing CAD. Further investigations of these polymorphisms and their possible synergisms with traditional risk factors for CAD could help to ascertain better predictability for CAD susceptibility.

The efficacy of using computer-aided detection (CAD) for detection of breast cancer in mammography screening: a systematic review.

PubMed

Henriksen, Emilie L; Carlsen, Jonathan F; Vejborg, Ilse Mm; Nielsen, Michael B; Lauridsen, Carsten A

2018-01-01

Background Early detection of breast cancer (BC) is crucial in lowering the mortality. Purpose To present an overview of studies concerning computer-aided detection (CAD) in screening mammography for early detection of BC and compare diagnostic accuracy and recall rates (RR) of single reading (SR) with SR + CAD and double reading (DR) with SR + CAD. Material and Methods PRISMA guidelines were used as a review protocol. Articles on clinical trials concerning CAD for detection of BC in a screening population were included. The literature search resulted in 1522 records. A total of 1491 records were excluded by abstract and 18 were excluded by full text reading. A total of 13 articles were included. Results All but two studies from the SR vs. SR + CAD group showed an increased sensitivity and/or cancer detection rate (CDR) when adding CAD. The DR vs. SR + CAD group showed no significant differences in sensitivity and CDR. Adding CAD to SR increased the RR and decreased the specificity in all but one study. For the DR vs. SR + CAD group only one study reported a significant difference in RR. Conclusion All but two studies showed an increase in RR, sensitivity and CDR when adding CAD to SR. Compared to DR no statistically significant differences in sensitivity or CDR were reported. Additional studies based on organized population-based screening programs, with longer follow-up time, high-volume readers, and digital mammography are needed to evaluate the efficacy of CAD.

Metabolite profiling reveals a role for atypical cinnamyl alcohol dehydrogenase CAD1 in the synthesis of coniferyl alcohol in tobacco xylem.

PubMed

Damiani, Isabelle; Morreel, Kris; Danoun, Saïda; Goeminne, Geert; Yahiaoui, Nabila; Marque, Christiane; Kopka, Joachim; Messens, Eric; Goffner, Deborah; Boerjan, Wout; Boudet, Alain-Michel; Rochange, Soizic

2005-11-01

In angiosperms, lignin is built from two main monomers, coniferyl and sinapyl alcohol, which are incorporated respectively as G and S units in the polymer. The last step of their synthesis has so far been considered to be performed by a family of dimeric cinnamyl alcohol dehydrogenases (CAD2). However, previous studies on Eucalyptus gunnii xylem showed the presence of an additional, structurally unrelated, monomeric CAD form named CAD1. This form reduces coniferaldehyde to coniferyl alcohol, but is inactive on sinapaldehyde. In this paper, we report the functional characterization of CAD1 in tobacco (Nicotiana tabacum L.). Transgenic tobacco plants with reduced CAD1 expression were obtained through an RNAi strategy. These plants displayed normal growth and development, and detailed biochemical studies were needed to reveal a role for CAD1. Lignin analyses showed that CAD1 down-regulation does not affect Klason lignin content, and has a moderate impact on G unit content of the non-condensed lignin fraction. However, comparative metabolic profiling of the methanol-soluble phenolic fraction from basal xylem revealed significant differences between CAD1 down-regulated and wild-type plants. Eight compounds were less abundant in CAD1 down-regulated lines, five of which were identified as dimers or trimers of monolignols, each containing at least one moiety derived from coniferyl alcohol. In addition, 3-trans-caffeoyl quinic acid accumulated in the transgenic plants. Together, our results support a significant contribution of CAD1 to the synthesis of coniferyl alcohol in planta, along with the previously characterized CAD2 enzymes.

A Geometry Based Infra-Structure for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

1998-01-01

The computational steps traditionally taken for most engineering analysis suites (computational fluid dynamics (CFD), structural analysis, heat transfer and etc.) are: (1) Surface Generation -- usually by employing a Computer Assisted Design (CAD) system; (2) Grid Generation -- preparing the volume for the simulation; (3) Flow Solver -- producing the results at the specified operational point; (4) Post-processing Visualization -- interactively attempting to understand the results. For structural analysis, integrated systems can be obtained from a number of commercial vendors. These vendors couple directly to a number of CAD systems and are executed from within the CAD Graphical User Interface (GUI). It should be noted that the structural analysis problem is more tractable than CFD; there are fewer mesh topologies used and the grids are not as fine (this problem space does not have the length scaling issues of fluids). For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. In most cases, the output from a CAD system could go to Initial Graphics Exchange Specification (IGES) or Standard Exchange Program (STEP) files. The output from Grid Generators and Solvers do not really have standards though there are a couple of file formats that can be used for a subset of the gridding (i.e. PLOT3D data formats). The user would have to patch up the data or translate from one format to another to move to the next step. Sometimes this could take days. Specifically the problems with this procedure are:(1) File based -- Information flows from one step to the next via data files with formats specified for that procedure. File standards, when they exist, are wholly inadequate. For example, geometry from CAD systems (transmitted via IGES files) is defined as disjoint surfaces and curves (as well as masses of other information of no interest for the Grid Generator). This is particularly onerous for modern CAD systems based on solid modeling. The part was a proper solid and in the translation to IGES has lost this important characteristic. STEP is another standard for CAD data that exists and supports the concept of a solid. The problem with STEP is that a solid modeling geometry kernel is required to query and manipulate the data within this type of file. (2) 'Good' Geometry. A bottleneck in getting results from a solver is the construction of proper geometry to be fed to the grid generator. With 'good' geometry a grid can be constructed in tens of minutes (even with a complex configuration) using unstructured techniques. Adroit multi-block methods are not far behind. This means that a million node steady-state solution can be computed on the order of hours (using current high performance computers) starting from this 'good' geometry. Unfortunately, the geometry usually transmitted from the CAD system is not 'good' in the grid generator sense. The grid generator needs smooth closed solid geometry. It can take a week (or more) of interaction with the CAD output (sometimes by hand) before the process can begin. One way Communication. (3) One-way Communication -- All information travels on from one phase to the next. This makes procedures like node adaptation difficult when attempting to add or move nodes that sit on bounding surfaces (when the actual surface data has been lost after the grid generation phase). Until this process can be automated, more complex problems such as multi-disciplinary analysis or using the above procedure for design becomes prohibitive. There is also no way to easily deal with this system in a modular manner. One can only replace the grid generator, for example, if the software reads and writes the same files. Instead of the serial approach to analysis as described above, CAPRI takes a geometry centric approach. This makes the actual geometry (not a discretized version) accessible to all phases of the analysis. The connection to the geometry is made through an Application Programming Interface (API) and NOT a file system. This API isolates the top-level applications (grid generators, solvers and visualization components) from the geometry engine. Also this allows the replacement of one geometry kernel with another, without effecting these top-level applications. For example, if UniGraphics is used as the CAD package then Parasolid (UG's own geometry engine) can be used for all geometric queries so that no solid geometry information is lost in a translation. This is much better than STEP because when the data is queried, the same software is executed as used in the CAD system. Therefore, one analyzes the exact part that is in the CAD system. CAPRI uses the same idea as the commercial structural analysis codes but does not specify control. Software components of the CAD system are used, but the analysis suite, not the CAD operator, specifies the control of the software session. This also means that the license issues (may be) minimized and individuals need not have to know how to operate a CAD system in order to run the suite.

Machine Learning in Ultrasound Computer-Aided Diagnostic Systems: A Survey

PubMed Central

Zhang, Fan; Li, Xuelong

2018-01-01

The ultrasound imaging is one of the most common schemes to detect diseases in the clinical practice. There are many advantages of ultrasound imaging such as safety, convenience, and low cost. However, reading ultrasound imaging is not easy. To support the diagnosis of clinicians and reduce the load of doctors, many ultrasound computer-aided diagnosis (CAD) systems are proposed. In recent years, the success of deep learning in the image classification and segmentation led to more and more scholars realizing the potential of performance improvement brought by utilizing the deep learning in the ultrasound CAD system. This paper summarized the research which focuses on the ultrasound CAD system utilizing machine learning technology in recent years. This study divided the ultrasound CAD system into two categories. One is the traditional ultrasound CAD system which employed the manmade feature and the other is the deep learning ultrasound CAD system. The major feature and the classifier employed by the traditional ultrasound CAD system are introduced. As for the deep learning ultrasound CAD, newest applications are summarized. This paper will be useful for researchers who focus on the ultrasound CAD system. PMID:29687000

Computer-aided diagnosis: A survey with bibliometric analysis.

PubMed

Takahashi, Ryohei; Kajikawa, Yuya

2017-05-01

Computer-aided diagnosis (CAD) has been a promising area of research over the last two decades. However, CAD is a very complicated subject because it involves a number of medicine and engineering-related fields. To develop a research overview of CAD, we conducted a literature survey with bibliometric analysis, which we report here. Our study determined that CAD research has been classified and categorized according to disease type and imaging modality. This classification began with the CAD of mammograms and eventually progressed to that of brain disease. Furthermore, based on our results, we discuss future directions and opportunities for CAD research. First, in contrast to the typical hypothetical approach, the data-driven approach has shown promise. Second, the normalization of the test datasets and an evaluation method is necessary when adopting an algorithm and a system. Third, we discuss opportunities for the co-evolution of CAD research and imaging instruments-for example, the CAD of bones and pancreatic cancer. Fourth, the potential of synergy with CAD and clinical decision support systems is also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Machine Learning in Ultrasound Computer-Aided Diagnostic Systems: A Survey.

PubMed

Huang, Qinghua; Zhang, Fan; Li, Xuelong

2018-01-01

The ultrasound imaging is one of the most common schemes to detect diseases in the clinical practice. There are many advantages of ultrasound imaging such as safety, convenience, and low cost. However, reading ultrasound imaging is not easy. To support the diagnosis of clinicians and reduce the load of doctors, many ultrasound computer-aided diagnosis (CAD) systems are proposed. In recent years, the success of deep learning in the image classification and segmentation led to more and more scholars realizing the potential of performance improvement brought by utilizing the deep learning in the ultrasound CAD system. This paper summarized the research which focuses on the ultrasound CAD system utilizing machine learning technology in recent years. This study divided the ultrasound CAD system into two categories. One is the traditional ultrasound CAD system which employed the manmade feature and the other is the deep learning ultrasound CAD system. The major feature and the classifier employed by the traditional ultrasound CAD system are introduced. As for the deep learning ultrasound CAD, newest applications are summarized. This paper will be useful for researchers who focus on the ultrasound CAD system.

Polymeric Binders which Reversibly Dissociate at Elevated Temperatures

DTIC Science & Technology

1978-05-01

C0O(CH2)xOC-C- N . ~Nk \\ N . N + H0(CH2)x OH HC. , , tH \\\\ N - N -C. HC-N1-- H H H ~0 ~+ 0CNRNC0 Polymer 14 S. Kasina and J. Nematollahi . "A New and Simple...NUMIIA& i* GOVT ACC9Ir.Q~ N NO. I CIIIIINT’S CATZALOG NUMOIR NWC-TP-591951 OLYUC INDERS WHICH.REVERSIBLY ! Rasear pr.. Ř 7.: , CISS-CIATSEAT ELEV...342M7RA""" El7cadUgee /nary.i TC. Aiea N - 3 F5335431. P ERMFORMING ORGANIZATION NAM E A NlO A OR SS 1 . P O R M CLM l T T S , ~ ~~~Naval Weapons

NMR analysis of lignins in CAD-deficient plants. Part 1, Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Treesearch

Hoon Kim; John Ralph; Fachuang Lu; Sally A. Ralph; Alain-M. Boudett; John J. MacKay; Ronald R. Sederoff; Takashi Ito; Shingo Kawai; Hideo Ohashi; Takayoshi Higuchi

2003-01-01

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8–O–4-, 8–5-, and 8–8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8–5- dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and...

Preference and avoidance pH of brook trout Salvelinus fontinalis and brown trout Salmo trutta exposed to different holding pH.

PubMed

Fost, B A; Ferreri, C P

2015-08-01

The goal of this study was to determine if short-term exposure of brook trout Salvelinus fontinalis and brown trout Salmo trutta to a lower pH than found in their source stream results in a shift in preference or avoidance pH. The lack of a shift in preference or avoidance pH of adult S. fontinalis and S. trutta suggests that these species can be held at a pH different from the source waterbody for a short period of time without altering preference or avoidance pH behaviour. © 2015 The Fisheries Society of the British Isles.

Computer-aided design development transition for IPAD environment

NASA Technical Reports Server (NTRS)

Owens, H. G.; Mock, W. D.; Mitchell, J. C.

1980-01-01

The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

CAD/CAE Integration Enhanced by New CAD Services Standard

NASA Technical Reports Server (NTRS)

Claus, Russell W.

2002-01-01

A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

Management of coronary artery disease

NASA Astrophysics Data System (ADS)

Safri, Z.

2018-03-01

Coronary Artery Disease (CAD) is associated with significant morbidity and mortality, therefore it’s important to early and accurate detection and appropriate management. Diagnosis of CAD include clinical examination, noninvasive techniques such as biochemical testing, a resting ECG, possibly ambulatory ECG monitoring, resting echocardiography, chest X-ray in selected patients; and catheterization. Managements of CAD patients include lifestyle modification, control of CAD risk factors, pharmacologic therapy, and patient education. Revascularization consists of percutaneous coronary angioplasty and coronary artery bypass grafting. Cardiac rehabilitation should be considered in all patients with CAD. This comprehensive review highlights strategies of management in patients with CAD.

A carbon dioxide avoidance behavior is integrated with responses to ambient oxygen and food in Caenorhabditis elegans

PubMed Central

Bretscher, Andrew Jonathan; Busch, Karl Emanuel; de Bono, Mario

2008-01-01

Homeostasis of internal carbon dioxide (CO2) and oxygen (O2) levels is fundamental to all animals. Here we examine the CO2 response of the nematode Caenorhabditis elegans. This species inhabits rotting material, which typically has a broad CO2 concentration range. We show that well fed C. elegans avoid CO2 levels above 0.5%. Animals can respond to both absolute CO2 concentrations and changes in CO2 levels within seconds. Responses to CO2 do not reflect avoidance of acid pH but appear to define a new sensory response. Sensation of CO2 is promoted by the cGMP-gated ion channel subunits TAX-2 and TAX-4, but other pathways are also important. Robust CO2 avoidance in well fed animals requires inhibition of the DAF-16 forkhead transcription factor by the insulin-like receptor DAF-2. Starvation, which activates DAF-16, strongly suppresses CO2 avoidance. Exposure to hypoxia (<1% O2) also suppresses CO2 avoidance via activation of the hypoxia-inducible transcription factor HIF-1. The npr-1 215V allele of the naturally polymorphic neuropeptide receptor npr-1, besides inhibiting avoidance of high ambient O2 in feeding C. elegans, also promotes avoidance of high CO2. C. elegans integrates competing O2 and CO2 sensory inputs so that one response dominates. Food and allelic variation at NPR-1 regulate which response prevails. Our results suggest that multiple sensory inputs are coordinated by C. elegans to generate different coherent foraging strategies. PMID:18524954

A carbon dioxide avoidance behavior is integrated with responses to ambient oxygen and food in Caenorhabditis elegans.

PubMed

Bretscher, Andrew Jonathan; Busch, Karl Emanuel; de Bono, Mario

2008-06-10

Homeostasis of internal carbon dioxide (CO2) and oxygen (O2) levels is fundamental to all animals. Here we examine the CO2 response of the nematode Caenorhabditis elegans. This species inhabits rotting material, which typically has a broad CO2 concentration range. We show that well fed C. elegans avoid CO2 levels above 0.5%. Animals can respond to both absolute CO2 concentrations and changes in CO2 levels within seconds. Responses to CO2 do not reflect avoidance of acid pH but appear to define a new sensory response. Sensation of CO2 is promoted by the cGMP-gated ion channel subunits TAX-2 and TAX-4, but other pathways are also important. Robust CO2 avoidance in well fed animals requires inhibition of the DAF-16 forkhead transcription factor by the insulin-like receptor DAF-2. Starvation, which activates DAF-16, strongly suppresses CO2 avoidance. Exposure to hypoxia (<1% O2) also suppresses CO2 avoidance via activation of the hypoxia-inducible transcription factor HIF-1. The npr-1 215V allele of the naturally polymorphic neuropeptide receptor npr-1, besides inhibiting avoidance of high ambient O2 in feeding C. elegans, also promotes avoidance of high CO2. C. elegans integrates competing O2 and CO2 sensory inputs so that one response dominates. Food and allelic variation at NPR-1 regulate which response prevails. Our results suggest that multiple sensory inputs are coordinated by C. elegans to generate different coherent foraging strategies.

Stress-induced release of the S100A8/A9 alarmin is elevated in coronary artery disease patients with impaired cortisol response.

PubMed

Jonasson, L; Grauen Larsen, H; Lundberg, A K; Gullstrand, B; Bengtsson, A A; Schiopu, A

2017-12-13

Psychological stress is thought to be an important trigger of cardiovascular events, yet the involved pathways and mediators are largely unknown. Elevated systemic levels of the pro-inflammatory alarmin S100A8/A9 correlate with poor prognosis in coronary artery disease (CAD) patients. Here, we investigated the links between S100A8/A9 release and parameters of anti-inflammatory glucocorticoid secretion in two different cohorts subjected to a psychological stress test. In the first cohort of 60 CAD patients, psychological stress induced a rapid increase of circulating S100A8/A9. This rapid S100A8/A9 response strongly correlated with elevated evening saliva cortisol levels, suggesting an association with a dysregulated hypothalamic-pituitary-adrenal (HPA) axis. In the second cohort of 27 CAD patients and 28 controls, elevated S100A8/A9 levels were still detectable 24 h after stress in 40% of patients and 36% of controls, with a tendency for higher levels in patients. The sustained S100A8/A9 response was associated with a poor rapid cortisol release after stress in patients, but not in the control group. Our findings reveal for the first time that acute psychological stress induces elevated levels of S100A8/A9. We also provide hypothesis-generating evidence that dysregulated cortisol secretion in CAD patients might be associated with an exaggerated pro-inflammatory S100A8/A9 response.

Hormone replacement therapy in women with systemic lupus erythematosus and risk of cardiovascular disease.

PubMed

Hochman, J; Urowitz, M B; Ibañez, D; Gladman, D D

2009-04-01

We sought to determine the impact of hormone replacement therapy (HRT) on the occurrence of coronary artery disease (CAD) in women with systemic lupus erythematosus (SLE). Women in the University of Toronto lupus database who had taken HRT with no history of CAD were compared with all post-menopausal female patients with no history of HRT or CAD. Chi-squared and t-tests were used to compare the risk factors of CAD and Kaplan-Meier curve, log rank test and proportional hazard model with time-dependent covariates were used to compare the time from entry into the clinic to occurrence of CAD. A total of 114 HRT-user patients with no history of CAD were compared with 227 post-menopausal non-HRT user SLE controls. The groups were similar with respect to lupus anticoagulant, antiphospholipid antibody, cumulative steroid dose and classic cardiac risk factors. A similar percentage of patients developed CAD in the control (13.7%) and HRT (11.4%) groups. There was no difference in the time to development of CAD. In the multivariate analysis, HRT was not a risk factor for CAD. Only age (P = 0.0001, HR = 1.11, 95% CI = 1.05, 1.17) and SLEDAI-2K (P = 0.0001, HR = 1.10, 95% CI = 1.05, 1.16) were significantly associated with the risk of CAD. In this small group of patients with SLE, HRT alone did not appear to predispose to CAD.

Genetic loci associated with coronary artery disease harbor evidence of selection and antagonistic pleiotropy.

PubMed

Byars, Sean G; Huang, Qin Qin; Gray, Lesley-Ann; Bakshi, Andrew; Ripatti, Samuli; Abraham, Gad; Stearns, Stephen C; Inouye, Michael

2017-06-01

Traditional genome-wide scans for positive selection have mainly uncovered selective sweeps associated with monogenic traits. While selection on quantitative traits is much more common, very few signals have been detected because of their polygenic nature. We searched for positive selection signals underlying coronary artery disease (CAD) in worldwide populations, using novel approaches to quantify relationships between polygenic selection signals and CAD genetic risk. We identified new candidate adaptive loci that appear to have been directly modified by disease pressures given their significant associations with CAD genetic risk. These candidates were all uniquely and consistently associated with many different male and female reproductive traits suggesting selection may have also targeted these because of their direct effects on fitness. We found that CAD loci are significantly enriched for lifetime reproductive success relative to the rest of the human genome, with evidence that the relationship between CAD and lifetime reproductive success is antagonistic. This supports the presence of antagonistic-pleiotropic tradeoffs on CAD loci and provides a novel explanation for the maintenance and high prevalence of CAD in modern humans. Lastly, we found that positive selection more often targeted CAD gene regulatory variants using HapMap3 lymphoblastoid cell lines, which further highlights the unique biological significance of candidate adaptive loci underlying CAD. Our study provides a novel approach for detecting selection on polygenic traits and evidence that modern human genomes have evolved in response to CAD-induced selection pressures and other early-life traits sharing pleiotropic links with CAD.

Spermine modulates the expression of two probable polyamine transporter genes and determines growth responses to cadaverine in Arabidopsis.

PubMed

Sagor, G H M; Berberich, Thomas; Kojima, Seiji; Niitsu, Masaru; Kusano, Tomonobu

2016-06-01

Two genes, LAT1 and OCT1 , are likely to be involved in polyamine transport in Arabidopsis. Endogenous spermine levels modulate their expression and determine the sensitivity to cadaverine. Arabidopsis spermine (Spm) synthase (SPMS) gene-deficient mutant was previously shown to be rather resistant to the diamine cadaverine (Cad). Furthermore, a mutant deficient in polyamine oxidase 4 gene, accumulating about twofold more of Spm than wild type plants, showed increased sensitivity to Cad. It suggests that endogenous Spm content determines growth responses to Cad in Arabidopsis thaliana. Here, we showed that Arabidopsis seedlings pretreated with Spm absorbs more Cad and has shorter root growth, and that the transgenic Arabidopsis plants overexpressing the SPMS gene are hypersensitive to Cad, further supporting the above idea. The transgenic Arabidopsis overexpressing L-Amino acid Transporter 1 (LAT1) absorbed more Cad and showed increased Cad sensitivity, suggesting that LAT1 functions as a Cad importer. Recently, other research group reported that Organic Cation Transporter 1 (OCT1) is a causal gene which determines the Cad sensitivity of various Arabidopsis accessions. Furthermore, their results suggested that OCT1 is involved in Cad efflux. Thus we monitored the expression of OCT1 and LAT1 during the above experiments. Based on the results, we proposed a model in which the level of Spm content modulates the expression of OCT1 and LAT1, and determines Cad sensitivity of Arabidopsis.

Cadherin-6B is proteolytically processed during epithelial-to-mesenchymal transitions of the cranial neural crest

PubMed Central

Schiffmacher, Andrew T.; Padmanabhan, Rangarajan; Jhingory, Sharon; Taneyhill, Lisa A.

2014-01-01

The epithelial-to-mesenchymal transition (EMT) is a highly coordinated process underlying both development and disease. Premigratory neural crest cells undergo EMT, migrate away from the neural tube, and differentiate into diverse cell types during vertebrate embryogenesis. Adherens junction disassembly within premigratory neural crest cells is one component of EMT and, in chick cranial neural crest cells, involves cadherin-6B (Cad6B) down-regulation. Whereas Cad6B transcription is repressed by Snail2, the rapid loss of Cad6B protein during EMT is suggestive of posttranslational mechanisms that promote Cad6B turnover. For the first time in vivo, we demonstrate Cad6B proteolysis during neural crest cell EMT, which generates a Cad6B N-terminal fragment (NTF) and two C-terminal fragments (CTF1/2). Coexpression of relevant proteases with Cad6B in vitro shows that a disintegrin and metalloproteinases (ADAMs) ADAM10 and ADAM19, together with γ-secretase, cleave Cad6B to produce the NTF and CTFs previously observed in vivo. Of importance, both ADAMs and γ-secretase are expressed in the appropriate spatiotemporal pattern in vivo to proteolytically process Cad6B. Overexpression or depletion of either ADAM within premigratory neural crest cells prematurely reduces or maintains Cad6B, respectively. Collectively these results suggest a dual mechanism for Cad6B proteolysis involving two ADAMs, along with γ-secretase, during cranial neural crest cell EMT. PMID:24196837

Chemodetection and Destruction of Host Urea Allows Helicobacter pylori to Locate the Epithelium

PubMed Central

Huang, Julie Y.; Sweeney, Emily Goers; Sigal, Michael; Zhang, Hai C.; Remington, S. James; Cantrell, Michael A.; Kuo, Calvin J.; Guillemin, Karen; Amieva, Manuel R.

2015-01-01

SUMMARY The gastric pathogen Helicobacter pylori interacts intimately with the gastric mucosa to avoid the microbicidal acid in the stomach lumen. The cues H. pylori senses to locate and colonize the gastric epithelium have not been well defined. We show that metabolites emanating from human gastric organoids rapidly attract H. pylori. This response is largely controlled by the bacterial chemoreceptor TlpB, and the main attractant emanating from epithelia is urea. Our previous structural analyses show that TlpB binds urea with high affinity. Here we demonstrate that this tight binding controls highly sensitive responses, allowing detection of urea concentrations as low as 50 nanomolar. Attraction to urea requires that H. pylori urease simultaneously destroys the signal. We propose that H. pylori has evolved a sensitive urea chemodetection and destruction system that allows the bacterium to dynamically and locally modify the host environment to locate the epithelium. PMID:26269952

Xeno-Free Strategies for Safe Human Mesenchymal Stem/Stromal Cell Expansion: Supplements and Coatings

PubMed Central

Gonçalves, R. M.; Barrias, C. C.

2017-01-01

Human mesenchymal stem/stromal cells (hMSCs) have generated great interest in regenerative medicine mainly due to their multidifferentiation potential and immunomodulatory role. Although hMSC can be obtained from different tissues, the number of available cells is always low for clinical applications, thus requiring in vitro expansion. Most of the current protocols for hMSC expansion make use of fetal bovine serum (FBS) as a nutrient-rich supplement. However, regulatory guidelines encourage novel xeno-free alternatives to define safer and standardized protocols for hMSC expansion that preserve their intrinsic therapeutic potential. Since hMSCs are adherent cells, the attachment surface and cell-adhesive components also play a crucial role on their successful expansion. This review focuses on the advantages/disadvantages of FBS-free media and surfaces/coatings that avoid the use of animal serum, overcoming ethical issues and improving the expansion of hMSC for clinical applications in a safe and reproducible way. PMID:29158740

CAD for small hydro projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bishop, N.A. Jr.

1994-04-01

Over the past decade, computer-aided design (CAD) has become a practical and economical design tool. Today, specifying CAD hardware and software is relatively easy once you know what the design requirements are. But finding experienced CAD professionals is often more difficult. Most CAD users have only two or three years of design experience; more experienced design personnel are frequently not CAD literate. However, effective use of CAD can be the key to lowering design costs and improving design quality--a quest familiar to every manager and designer. By emphasizing computer-aided design literacy at all levels of the firm, a Canadian joint-venturemore » company that specializes in engineering small hydroelectric projects has cut costs, become more productive and improved design quality. This article describes how they did it.« less

Increased thrombin generation after acute versus chronic coronary disease as assessed by the thrombin generation test.

PubMed

Orbe, Josune; Zudaire, Maite; Serrano, Rosario; Coma-Canella, Isabel; Martínez de Sizarrondo, Sara; Rodríguez, Jose A; Páramo, Jose A

2008-02-01

Atherosclerosis is the most common pathophysiologic substrate of coronary artery disease (CAD). Whereas plaque progression and arterial remodeling are critical components in chronic CAD, intracoronary thrombosis over plaque disruption is causally related to acute CAD. It was the objective of this study to investigate the differences between prior acute CAD and chronic CAD by a simple global coagulation assay measuring thrombin generation. A cross-sectional study involving 15 healthy controls, 35 patients with chronic stable CAD, and 60 patients after an episode of acute myocardial infarction (AMI) was performed. Thrombin generation was measured between three and 11 months after the initial diagnosis (mean 6 months) by a commercially available fluorogenic assay (Technothrombin TGA). In each patient the lag phase, velocity index and peak thrombin were obtained from the thrombogram profile. Traditional cardiovascular risk factors were recorded, and the inflammatory markers, fibrinogen and hs-C-reactive protein were determined. Compared with stable CAD patients, showing normal thrombograms, those with previous AMI showed earlier lag phase (p < 0.05) and significant increase of both the velocity index (p < 0.001) and peak thrombin (p < 0.05), indicating faster and higher thrombin generation in the AMI group. Differences in thrombin generation between stable and acute CAD patients remained significant (p < 0.001) after adjusting for conventional CAD risk factors (age, gender, diabetes, hypertension, smoking, and hypercholesterolemia). In conclusion, patients with a previous history of acute CAD showed earlier, faster and higher thrombin generation than stable chronic CAD patients. The thrombin generation test may be of clinical value to monitor hypercoagulable/vulnerable blood and/or guide therapy in CAD.

Evaluation of computer-aided detection and diagnosis systems.

PubMed

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-08-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and "best practices" for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice.

Fracture strength testing of crowns made of CAD/CAM composite resins.

PubMed

Okada, Ryota; Asakura, Masaki; Ando, Akihiro; Kumano, Hirokazu; Ban, Seiji; Kawai, Tatsushi; Takebe, Jun

2018-03-28

The purpose of this study was to ascertain whether computer aided design/computer aided manufacturing (CAD/CAM) composite resin crowns have sufficient strength to withstand the bite force of the molar teeth. The null hypothesis was that the fracture strength of CAD/CAM composite resin crowns is lower than the average maximum bite force of the molar tooth. The crowns, which shape is the right maxillary first molar, were fabricated using four CAD/CAM blanks made of composite resins (Block HC: HC, KZR-CAD HR: HR, KZR-CAD HR2: HR2, Avencia Block: AVE) and one CAD/CAM blank made of lithium disilicate glass-ceramic (IPS e.max CAD: IPS), which was used as a control. Fracture strength of fabricated crowns bonded to metal abutment and biaxial flexural strength of the materials were evaluated. The results of fracture strength test and biaxial flexural strength test showed different tendencies. The fracture strength of CAD/CAM composite resin crowns except HC ranged from 3.3kN to 3.9kN, and was similar to that of IPS (3.3kN). In contrast, biaxial flexural strength of CAD/CAM composite resins ranged from 175MPa to 247MPa, and was significantly lower than that of IPS (360MPa). All CAD/CAM composite resin crowns studied presented about 3-4 times higher fracture strength than the average maximum bite force of the molar tooth (700-900N), which result leads to the conclusion that CAD/CAM composite resin crowns would have sufficient strength to withstand the bite force of the molar teeth. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Genetic variants associated with celiac disease and the risk for coronary artery disease.

PubMed

Jansen, Henning; Willenborg, Christina; Schlesinger, Sabrina; Ferrario, Paola G; König, Inke R; Erdmann, Jeanette; Samani, Nilesh J; Lieb, Wolfgang; Schunkert, Heribert

2015-10-01

Epidemiological evidence suggests that patients with celiac disease are at increased risk for coronary artery disease (CAD). Genetic-epidemiological analyses identified many single nucleotide polymorphisms (SNPs) associated with celiac disease. If there is a causal relation between celiac disease and CAD, one might expect that risk alleles primarily associated with celiac disease also increase the risk of CAD. In this study we identified from literature 41 SNPs that have been previously described to be genome-wide associated with celiac disease (p < 5 × 10(-08)). These SNPs were evaluated for their association with CAD in the Coronary ARtery DIsease Genome-wide Replication and Meta-analysis (CARDIoGRAM) dataset, a meta-analysis comprising genome-wide SNP association data from 22,233 CAD cases and 64,762 controls. 24 out of 41 (58.5 %) risk alleles for celiac disease displayed a positive association with CAD (CAD-OR range 1.001-1.081). The remaining risk alleles for celiac disease (n = 16) revealed CAD-ORs of ≤1.0 (range 0.951-1.0). The proportion of CAD associated alleles was greater but did not differ significantly from the proportion of 50 % expected by chance (p = 0.069). One SNP (rs653178 at the SH2B3/ATXN2 locus) displayed study-wise statistically significant association with CAD with directionality consistent effects on celiac disease and CAD. However, the effect of this locus is most likely driven by pleiotropic effects on multiple other diseases. In conclusion, this genetically based approach provided no convincing evidence that SNPs associated with celiac disease contribute to the risk of CAD. Hence, common non-genetic factors may play a more important role explaining the coincidence of these two complex disease conditions.

The Nucleotide Synthesis Enzyme CAD Inhibits NOD2 Antibacterial Function in Human Intestinal Epithelial Cells

PubMed Central

Richmond, Amy L.; Kabi, Amrita; Homer, Craig R.; García, Noemí Marina; Nickerson, Kourtney P.; NesvizhskiI, Alexey I.; Sreekumar, Arun; Chinnaiyan, Arul M.; Nuñez, Gabriel; McDonald, Christine

2013-01-01

BACKGROUND & AIMS Polymorphisms that reduce the function of nucleotide-binding oligomerization domain (NOD)2, a bacterial sensor, have been associated with Crohn’s disease (CD). No proteins that regulate NOD2 activity have been identified as selective pharmacologic targets. We sought to discover regulators of NOD2 that might be pharmacologic targets for CD therapies. METHODS Carbamoyl phosphate synthetase/ aspartate transcarbamylase/dihydroorotase (CAD) is an enzyme required for de novo pyrimidine nucleotide synthesis; it was identified as a NOD2-interacting protein by immunoprecipitation-coupled mass spectrometry. CAD expression was assessed in colon tissues from individuals with and without inflammatory bowel disease by immunohistochemistry. The interaction between CAD and NOD2 was assessed in human HCT116 intestinal epithelial cells by immunoprecipitation, immunoblot, reporter gene, and gentamicin protection assays. We also analyzed human cell lines that express variants of NOD2 and the effects of RNA interference, overexpression and CAD inhibitors. RESULTS CAD was identified as a NOD2-interacting protein expressed at increased levels in the intestinal epithelium of patients with CD compared with controls. Overexpression of CAD inhibited NOD2-dependent activation of nuclear factor κB and p38 mitogen-activated protein kinase, as well as intracellular killing of Salmonella. Reduction of CAD expression or administration of CAD inhibitors increased NOD2-dependent signaling and antibacterial functions of NOD2 variants that are and are not associated with CD. CONCLUSIONS The nucleotide synthesis enzyme CAD is a negative regulator of NOD2. The antibacterial function of NOD2 variants that have been associated with CD increased in response to pharmacologic inhibition of CAD. CAD is a potential therapeutic target for CD. PMID:22387394

Network-Based Identification and Prioritization of Key Regulators of Coronary Artery Disease Loci

PubMed Central

Zhao, Yuqi; Chen, Jing; Freudenberg, Johannes M.; Meng, Qingying; Rajpal, Deepak K.; Yang, Xia

2017-01-01

Objective Recent genome-wide association studies of coronary artery disease (CAD) have revealed 58 genome-wide significant and 148 suggestive genetic loci. However, the molecular mechanisms through which they contribute to CAD and the clinical implications of these findings remain largely unknown. We aim to retrieve gene subnetworks of the 206 CAD loci and identify and prioritize candidate regulators to better understand the biological mechanisms underlying the genetic associations. Approach and Results We devised a new integrative genomics approach that incorporated (1) candidate genes from the top CAD loci, (2) the complete genetic association results from the 1000 genomes-based CAD genome-wide association studies from the Coronary Artery Disease Genome Wide Replication and Meta-Analysis Plus the Coronary Artery Disease consortium, (3) tissue-specific gene regulatory networks that depict the potential relationship and interactions between genes, and (4) tissue-specific gene expression patterns between CAD patients and controls. The networks and top-ranked regulators according to these data-driven criteria were further queried against literature, experimental evidence, and drug information to evaluate their disease relevance and potential as drug targets. Our analysis uncovered several potential novel regulators of CAD such as LUM and STAT3, which possess properties suitable as drug targets. We also revealed molecular relations and potential mechanisms through which the top CAD loci operate. Furthermore, we found that multiple CAD-relevant biological processes such as extracellular matrix, inflammatory and immune pathways, complement and coagulation cascades, and lipid metabolism interact in the CAD networks. Conclusions Our data-driven integrative genomics framework unraveled tissue-specific relations among the candidate genes of the CAD genome-wide association studies loci and prioritized novel network regulatory genes orchestrating biological processes relevant to CAD. PMID:26966275

A Comparison of the Marginal and Internal Fit of Cobalt- Chromium Copings Fabricated by Two Different CAD/CAM Systems (CAD/ Milling, CAD/ Ceramill Sintron).

PubMed

Vojdani, Mahroo; Torabi, Kianoosh; Atashkar, Berivan; Heidari, Hossein; Torabi Ardakani, Mahshid

2016-12-01

Marginal fitness is the most important criteria for evaluation of the clinical acceptability of a cast restoration. Marginal gap which is due to cement solubility and plaque retention is potentially detrimental to both tooth and periodontal tissues. This in vitro study aimed to evaluate the marginal and internal fit of cobalt- chromium (Co-Cr) copings fabricated by two different CAD/CAM systems: (CAD/ milling and CAD/ Ceramill Sintron). We prepared one machined standard stainless steel master model with following dimensions: 7 mm height, 5mm diameter, 90˚ shoulder marginal finish line with 1 mm width, 10˚ convergence angle and anti-rotational surface on the buccal aspect of the die. There were 10 copings produced from hard presintered Co-Cr blocks according to CAD/ Milling technique and ten copings from soft non- presintered Co-Cr blocks according to CAD/ Ceramill Sintron technique. Marginal and internal accuracies of copings were documented by the replica technique. Replicas were examined at ten reference points under a digital microscope (230X). The Student's t-test was used for statistical analysis. p < 0.001 was considered significant. Statistically significant differences existed between the groups ( p < 0.001). The CAD/milling group (hard copings) had a mean marginal discrepancy (MD) of 104 µm, axial discrepancy (AD) of 23 µm and occlusal discrepancy of 130 µm. For CAD/ Ceramill Sintron group, these values were 195 µm (MD), 46 µm (AD), and 232 µm (OD). Internal total discrepancy (ITD) for the CAD/milling group was 77 µm, whereas for the CAD/Ceramill Sintron group was 143 µm. Hard presintered Co-Cr copings had significantly higher marginal and internal accuracies compared to the soft non-presintered copings.

Relation of Monocyte/High-Density Lipoprotein Cholesterol Ratio with Coronary Artery Disease in Type 2 Diabetes Mellitus.

PubMed

Ya, Gao; Qiu, Zhang; Tianrong, Pan

2018-06-01

Atherosclerotic cardiovascular disease is the leading cause of mortality of patients with type 2 diabetes mellitus, and both coronary artery disease (CAD) and diabetes mellitus are associated with inflammation. Emerging evidence suggests a relationship of the monocyte to high-density lipoprotein cholesterol ratio (MHR) with the incidence and severity of CAD. The aim of the present study was to examine the association of MHR with CAD in patients with type 2 diabetes mellitus. A total of 458 consecutive individuals were enrolled, comprising 178 type 2 diabetic patients, 124 type 2 diabetes with CAD, and 156 healthy volunteers as the controls. A multivariable logistic regression model was used to evaluate the relationship between the MHR and CAD in type 2 diabetes, and the receiver operating characteristic (ROC) curve of MHR was used for predicting the presence of CAD in type 2 diabetic patients. Values of MHR were significantly higher in type 2 diabetic patients with CAD compared with those without CAD and the control group. Moreover, multivariate logistic regression analysis showed that MHR was an independent predictor of the presence of CAD in type 2 diabetic patients (OR = 1.361, 95% CI 1.245 - 1.487, p < 0.0001). Based on the receiver operating characteristic (ROC) curve, the cutoff value of MHR (> 8.2) in predicting the presence of CAD in type 2 diabetic patients yields a sensitivity and specificity of 83.74% and 62.15%, respectively, with an area under the curve of 0.795 (95% CI: 0.745 - 0.840). The MHR is strongly associated with CAD in type 2 diabetes and might be a potential biomarker to predict the presence of CAD in type 2 diabetic patients.

Evaluation of computer-aided detection and diagnosis systemsa)

PubMed Central

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G.; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T.; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M.; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-01-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and “best practices” for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice. PMID:23927365

The simultaneous repression of CCR and CAD, two enzymes of the lignin biosynthetic pathway, results in sterility and dwarfism in Arabidopsis thaliana.

PubMed

Thévenin, Johanne; Pollet, Brigitte; Letarnec, Bruno; Saulnier, Luc; Gissot, Lionel; Maia-Grondard, Alessandra; Lapierre, Catherine; Jouanin, Lise

2011-01-01

Cinnamoyl CoA reductase (CCR) and cinnamyl alcohol dehydrogenase (CAD) catalyze the last steps of monolignol biosynthesis. In Arabidopsis, one CCR gene (CCR1, At1g15950) and two CAD genes (CAD C At3g19450 and CAD D At4g34230) are involved in this pathway. A triple cad c cad d ccr1 mutant, named ccc, was obtained. This mutant displays a severe dwarf phenotype and male sterility. The lignin content in ccc mature stems is reduced to 50% of the wild-type level. In addition, stem lignin structure is severely affected, as shown by the dramatic enrichment in resistant inter-unit bonds and incorporation into the polymer of monolignol precursors such as coniferaldehyde, sinapaldehyde, and ferulic acid. Male sterility is due to the lack of lignification in the anther endothecium, which causes the failure of anther dehiscence and of pollen release. The ccc hypolignified stems accumulate higher amounts of flavonol glycosides, sinapoyl malate and feruloyl malate, which suggests a redirection of the phenolic pathway. Therefore, the absence of CAD and CCR, key enzymes of the monolignol pathway, has more severe consequences on the phenotype than the individual absence of each of them. Induction of another CCR (CCR2, At1g80820) and another CAD (CAD1, At4g39330) does not compensate the absence of the main CCR and CAD activities. This lack of CCR and CAD activities not only impacts lignification, but also severely affects the development of the plants. These consequences must be carefully considered when trying to reduce the lignin content of plants in order to facilitate the lignocellulose-to-bioethanol conversion process.

Predictors of Adherence in the Women’s Health Initiative Calcium and Vitamin D Trial

PubMed Central

Brunner, R.; Dunbar-Jacob, J.; LeBoff, M. S.; Granek, I.; Bowen, D.; Snetselaar, L. G.; Shumaker, S. A.; Ockene, J.; Rosal, M.; Wactawski-Wende, J.; Cauley, J.; Cochrane, B.; Tinker, L.; Jackson, R.; Wang, C. Y.; Wu, L.

2010-01-01

The authors analyzed data from the Women’s Health Initiative (WHI) Calcium and Vitamin D Supplementation Trial (CaD) to learn more about factors affecting adherence to clinical trial study pills (both active and placebo). Most participants (36,282 postmenopausal women aged 50–79 years) enrolled in CaD 1 year after joining either a hormone trial or the dietary modification trial of WHI. The WHI researchers measured adherence to study pills by weighing the amount of remaining pills at an annual study visit; adherence was primarily defined as taking ≥ 80% of the pills. The authors in this study examined a number of behavioral, demographic, procedural, and treatment variables for association with study pill adherence. They found that relatively simple procedures (ie, phone contact early in the study [4 weeks post randomization] and direct social contact) later in the trial may improve adherence. Also, at baseline, past pill-use experiences, personal supplement use, and relevant symptoms may be predictive of adherence in a supplement trial. PMID:19064373

Differences in wood density and growth of fertilized and nonfertilized loblolly pine associated with a mutant gene, cad-n1

Treesearch

Q. Yu; S.E. McKeand; C.D. Nelson; B. Li; J.R. Sherrill; T.J. Mullin

2005-01-01

A rare mutant allele (cad-n1) of the cad gene in loblolly pine (Pinus taeda L.) causes a deficiency in the production of cinnamyl alcohol dehydroganase (CAD). Effects associated with this allele were examined by comparing wood density and growth traits of cad-n1 heterozygous trees with those of wild-type trees in a 10-year-old open-pollinated family...

Research on remote sensing image pixel attribute data acquisition method in AutoCAD

NASA Astrophysics Data System (ADS)

Liu, Xiaoyang; Sun, Guangtong; Liu, Jun; Liu, Hui

2013-07-01

The remote sensing image has been widely used in AutoCAD, but AutoCAD lack of the function of remote sensing image processing. In the paper, ObjectARX was used for the secondary development tool, combined with the Image Engine SDK to realize remote sensing image pixel attribute data acquisition in AutoCAD, which provides critical technical support for AutoCAD environment remote sensing image processing algorithms.

Software Tools for Shipbuilding Productivity

DTIC Science & Technology

1984-12-01

shipbuilding, is that design, manufacturing and robotic technology applications to shipbuilding have been proven. all aspects of shipbuilding is now a task...technical information about the process of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) effectively has been a problem of serious and...Design (CAD) 3.4.1 CAD System Components 3.4.2 CAD System Benefits 3.4.3 New and Future CAD Technologies Computer Aided Manufacturing (CAM) 3.5.1 CAM

High-Sensitivity Troponin I Levels and Coronary Artery Disease Severity, Progression, and Long-Term Outcomes.

PubMed

Samman Tahhan, Ayman; Sandesara, Pratik; Hayek, Salim S; Hammadah, Muhammad; Alkhoder, Ayman; Kelli, Heval M; Topel, Matthew; O'Neal, Wesley T; Ghasemzadeh, Nima; Ko, Yi-An; Gafeer, Mohamad Mazen; Abdelhadi, Naser; Choudhary, Fahad; Patel, Keyur; Beshiri, Agim; Murtagh, Gillian; Kim, Jonathan; Wilson, Peter; Shaw, Leslee; Vaccarino, Viola; Epstein, Stephen E; Sperling, Laurence; Quyyumi, Arshed A

2018-02-21

The associations between high-sensitivity troponin I (hsTnI) levels and coronary artery disease (CAD) severity and progression remain unclear. We investigated whether there is an association between hsTnI and angiographic severity and progression of CAD and whether the predictive value of hsTnI level for incident cardiovascular outcomes is independent of CAD severity. In 3087 patients (aged 63±12 years, 64% men) undergoing cardiac catheterization without evidence of acute myocardial infarction, the severity of CAD was calculated by the number of major coronary arteries with ≥50% stenosis and the Gensini score. CAD progression was assessed in a subset of 717 patients who had undergone ≥2 coronary angiograms >3 months before enrollment. Patients were followed up for incident all-cause mortality and incident cardiovascular events. Of the total population, 11% had normal angiograms, 23% had nonobstructive CAD, 20% had 1-vessel CAD, 20% had 2-vessel CAD, and 26% had 3-vessel CAD. After adjusting for age, sex, race, body mass index, smoking, hypertension, diabetes mellitus history, and renal function, hsTnI levels were independently associated with the severity of CAD measured by the Gensini score (log 2 ß=0.31; 95% confidence interval, 0.18-0.44; P <0.001) and with CAD progression (log 2 ß=0.36; 95% confidence interval, 0.14-0.58; P =0.001). hsTnI level was also a significant predictor of incident death, cardiovascular death, myocardial infarction, revascularization, and cardiac hospitalizations, independent of the aforementioned covariates and CAD severity. Higher hsTnI levels are associated with the underlying burden of coronary atherosclerosis, more rapid progression of CAD, and higher risk of all-cause mortality and incident cardiovascular events. Whether more aggressive treatment aimed at reducing hsTnI levels can modulate disease progression requires further investigation. © 2018 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Evaluation of association between common genetic variants on chromosome 9p21 and coronary artery disease in Turkish population.

PubMed

Çakmak, Hüseyin Altuğ; Bayoğlu, Burcu; Durmaz, Eser; Can, Günay; Karadağ, Bilgehan; Cengiz, Müjgan; Vural, Vural Ali; Yüksel, Hüsniye

2015-03-01

Coronary artery disease (CAD), which develops from complex interactions between genetic and enviromental factors, is a leading cause of death worldwide. Based on genome-wide association studies (GWAS), the chromosomal region 9p21 has been identified as the most relevant locus presenting a strong association with CAD in different populations. The aim of the present study was to investigate the association of two SNPs on chromosome 9p21 on susceptibility to CAD and the effect of these SNPs along with cardiovascular risk factors on the severity of CAD in the Turkish population. This study had an observational case-control design. We genotyped 460 subjects, aged 30-65 years, to investigate the association of 2 SNPs (rs1333049, rs2383207) on chromosome 9p21 and CAD risk in Turkish population. Real-time polymerase chain reaction (RT-PCR) was used to analyze the 2 SNPs in CAD patients and healthy controls. The genotype and allelic variations of these SNPs with the severity of CAD was also assessed using semi-quantitative methods such as the Gensini score. Student's t test and multiple regression analysis were used for statistical analysis. The SNPs rs1333049 and rs2383207 were found to be associated with CAD with an adjusted OR of 1.81 (95% Cl 1.05-3.12) and 2.12 (95% CI 1.19-4.10) respectively. After adjustment of CAD risk factors such as smoking, family history of CAD and diabetes, the homozygous AA genotype for rs2383207 increased the CAD risk with an OR 3.69. Also a very strong association was found between rs1333049 and rs2383207 and Gensini scores representing the severity of CAD (p<0.001). The rs2383207 and rs1333049 SNPs on 9p21 chromosome were significantly associated with the risk and severity of CAD in the Turkish population.

Effect of glycemic state on postprandial hyperlipidemia and hyperinsulinemia in patients with coronary artery disease.

PubMed

Nakamura, Akihiro; Monma, Yuto; Kajitani, Shoko; Noda, Kazuki; Nakajima, Sota; Endo, Hideaki; Takahashi, Tohru; Nozaki, Eiji

2016-09-01

Both postprandial hyperlipidemia and hyperinsulinemia have been thought to play an important role in the development of atherosclerosis, and to be a potent risk factor for cardiovascular event. To examine effects of glycemic state on postprandial hyperlipidemia and hyperinsulinemia in patients with coronary artery disease (CAD), a total of 112 consecutive male pati ents with angiographically confirmed CAD were loaded with a high-fat and high-glucose test meal. CAD patients were divided into three groups as "non-diabetic", "prediabetic", and "diabetic" CAD groups. The serum triglyceride (TG) and remnant-like particle cholesterol (RLP-C) levels at the 6th hour in diabetic CAD group showed significantly higher than non-diabetic CAD group, and the incremental area under the curves (iAUCs) of these levels in diabetic CAD group were significantly greater than non-diabetic CAD group (TG, P = 0.0194; RLP-C, P = 0.0219). There were no significant differences in the iAUCs of TG or RLP-C between prediabetic and non-diabetic CAD group. The AUCs of plasma insulin levels or insulin resistance index (IRI): (AUCs of insulin) × (AUCs of glucose) as the insulin resistance marker were greater in diabetic CAD group than non-diabetic CAD group (insulin, P = 0.0373; IRI, P = 0.0228). The AUCs of serum TG or RLP-C levels showed a correlation with the AUCs of plasma insulin (AUC-TG, r = 0.5437, P < 0.0001; AUC-RLP-C, r = 0.6847, P < 0.0001), and they correlated well with the insulin resistance index (AUC-TG, r = 0.7724, P < 0.0001; AUC-RLP-C, r = 0.7645, P < 0.0001). We found that the insulin resistance showed a close relationship with postprandial hyperlipidemia in CAD patients. Diabetic, but not prediabetic state, may be a risk for postprandial impaired lipid metabolism in CAD patients.

Long-term survival and causes of death in patients with ST-elevation acute coronary syndrome without obstructive coronary artery disease.

PubMed

Andersson, Hedvig Bille; Pedersen, Frants; Engstrøm, Thomas; Helqvist, Steffen; Jensen, Morten Kvistholm; Jørgensen, Erik; Kelbæk, Henning; Räder, Sune Bernd Emil Werner; Saunamäki, Kari; Bates, Eric; Grande, Peer; Holmvang, Lene; Clemmensen, Peter

2018-01-07

We aimed to study survival and causes of death in patients with ST-elevation acute coronary syndrome (STE-ACS) with and without obstructive coronary artery disease (CAD). We included 4793 consecutive patients with STE-ACS triaged for acute coronary angiography at a large cardiac invasive centre (2009-2014). Of these, 88% had obstructive CAD (stenosis ≥50%), 6% had non-obstructive CAD (stenosis 1-49%), and 5% had normal coronary arteries. Patients without obstructive CAD were younger and more often female with fewer cardiovascular risk factors. Median follow-up time was 2.6 years. Compared with patients with obstructive CAD, the short-term hazard of death (≤30 days) was lower in both patients with non-obstructive CAD [hazard ratio (HR) 0.49, 95% confidence interval (CI) 0.27-0.89, P = 0.018] and normal coronary arteries (HR 0.31, 95% CI 0.11-0.83, P = 0.021). In contrast, the long-term hazard of death (>30 days) was similar in patients with non-obstructive CAD (HR 1.15, 95% CI 0.77-1.72, P = 0.487) and higher in patients with normal coronary arteries (HR 2.44, 95% CI 1.58-3.76, P < 0.001), regardless of troponin levels. Causes of death were cardiovascular in 70% of patients with obstructive CAD, 38% with non-obstructive CAD, and 32% with normal coronary arteries. Finally, patients without obstructive CAD had lower survival compared with an age and sex matched general population. STE-ACS patients without obstructive CAD had a long-term risk of death similar to or higher than patients with obstructive CAD. Causes of death were less often cardiovascular. This suggests that STE-ACS patients without obstructive CAD warrant medical attention and close follow-up. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

Noise detection in heart sound recordings.

PubMed

Zia, Mohammad K; Griffel, Benjamin; Fridman, Vladimir; Saponieri, Cesare; Semmlow, John L

2011-01-01

Coronary artery disease (CAD) is the leading cause of death in the United States. Although progression of CAD can be controlled using drugs and diet, it is usually detected in advanced stages when invasive treatment is required. Current methods to detect CAD are invasive and/or costly, hence not suitable as a regular screening tool to detect CAD in early stages. Currently, we are developing a noninvasive and cost-effective system to detect CAD using the acoustic approach. This method identifies sounds generated by turbulent flow through partially narrowed coronary arteries to detect CAD. The limiting factor of this method is sensitivity to noises commonly encountered in the clinical setting. Because the CAD sounds are faint, these noises can easily obscure the CAD sounds and make detection impossible. In this paper, we propose a method to detect and eliminate noise encountered in the clinical setting using a reference channel. We show that our method is effective in detecting noise, which is essential to the success of the acoustic approach.

Microhardness evaluations of CAD/CAM ceramics irradiated with CO2 or Nd:YAP laser

PubMed Central

Rocca, Jean Paul; Fornaini, Carlo; Medioni, Etienne; Brulat-Bouchard, Nathalie

2017-01-01

Background and aims The aim of this study was to measure the microhardness values of irradiated computer-aided design/computer-aided manufacturing (CAD/CAM) ceramics surfaces before and after thermal treatment. Materials and Methods Sixty CAD/CAM ceramic discs were prepared and grouped by material, i.e. lithium disilicate ceramic (Emax CAD) and zirconia ceramic (Emax ZirCAD). Laser irradiation at the material surface was performed with a carbon dioxide laser at 5 Watt (W) or 10 W power in continuous mode (CW mode), or with a neodymium:yttrium aluminum perovskite (Nd:YAP) laser at 10 W on graphite and non-graphite surfaces. Vickers hardness was tested at 0.3 kgf for lithium disilicate and 1 kgf for zirconia. Results Emax CAD irradiated with CO2 at 5 W increased microhardness by 6.32 GPa whereas Emax ZirCAD irradiated with Nd:YAP decreased microhardness by 17.46 GPa. Conclusion CO2 laser effectively increases the microhardness of lithium disilicate ceramics (Emax CAD). PMID:28740324

Computer-aided detection in musculoskeletal projection radiography: A systematic review.

PubMed

Gundry, M; Knapp, K; Meertens, R; Meakin, J R

2018-05-01

To investigated the accuracy of computer-aided detection (CAD) software in musculoskeletal projection radiography via a systematic review. Following selection screening, eligible studies were assessed for bias, and had their study characteristics extracted resulting in 22 studies being included. Of these 22 three studies had tested their CAD software in a clinical setting; the first study investigated vertebral fractures, reporting a sensitivity score of 69.3% with CAD, compared to 59.8% sensitivity without CAD. The second study tested dental caries diagnosis producing a sensitivity score of 68.8% and specificity of 94.1% with CAD, compared to sensitivity of 39.3% and specificity of 96.7% without CAD. The third indicated osteoporotic cases based on CAD, resulting in 100% sensitivity and 81.3% specificity. The current evidence reported shows a lack of development into the clinical testing phase; however the research does show future promise in the variation of different CAD systems. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

Metastability in Molecules

DTIC Science & Technology

1993-03-05

SDO.MlJq󈧭 MIVT4I CaD Level of Theory Electron amnityorCN radical . (0) ROIIF: (e*) U10. Under this grant, our next methodological development pertains...and Theoretical Study of Ketenimine CH2 ffC=NH and N-Methyl Ketenimine CH2--C=NCH 3, J. Am. Chem. Soc.112, 3779 (1991). 5. H. Sekino and R.J

Polyarterial clustered recurrence of cervical artery dissection seems to be the rule.

PubMed

Dittrich, R; Nassenstein, I; Bachmann, R; Maintz, D; Nabavi, D G; Heindel, W; Kuhlenbäumer, G; Ringelstein, E B

2007-07-10

Spontaneous cervical artery dissection (sCAD) in multiple neck arteries (polyarterial sCAD) is traditionally thought to represent a monophasic disorder suggesting nearly simultaneous occurrence of the various intramural hematomas. Its incidence ranges from 10 to 28%. The recurrence rate of sCAD in general over up to 8.6 years has been recorded to be 0 to 8%. To analyze more precisely the temporal and spatial neuroangiologic course of sCAD with particular focus on polyarterial manifestation. We prospectively investigated 36 consecutive patients with sCAD unexceptionally proven by MR imaging at 1.5 T. We reinvestigated these patients by two follow-up MR examinations. The first follow-up MR examination was performed after a mean of 16 +/- 13 days, and the last MR study after a mean of 7 +/- 2 months after the initial diagnosis. Systematic data evaluation of the 36 patients revealed the following phenomena of sCAD: 1) seemingly simultaneous polyarterial sCAD on the initial MRI scan (n = 2; 6%); 2) recurrent sCAD in one or several initially uninvolved cervical arteries during follow-up (n = 9; 25%). These latter sCAD occurred as an early polyarterial recurrent event within 1 to 4 weeks in 7 patients (19%), and as a delayed polyarterial recurrent event within 5 to 7 months in 2 patients (6%). Under a spatial perspective, sCAD recurrence took place in one additional cervical artery in 5 patients (14%), or in more than one previously uninvolved cervical artery in 4 patients (11%). All patients except one with sCAD recurrence remained asymptomatic or had local symptoms only. One patient experienced a significant clinical deterioration due to ischemic stroke with acute impairment of cerebral hemodynamics. During follow-up, patients received transient oral anticoagulation for at least 6 months with subsequent acetylsalicylic acid (ASA). More often than previously thought, the recurrence of spontaneous cervical artery dissection (sCAD) involves multiple cervical arteries in sequence. sCAD recurrence frequently appears to cluster within the first 2 months after the index event, rather than occurring steadily over time. The prognosis of recurring sCAD appears benign, particularly in patients already receiving antithrombotic therapy.

A Comparison of the Updated Diamond-Forrester, CAD Consortium, and CONFIRM History-Based Risk Scores for Predicting Obstructive Coronary Artery Disease in Patients With Stable Chest Pain: The SCOT-HEART Coronary CTA Cohort.

PubMed

Baskaran, Lohendran; Danad, Ibrahim; Gransar, Heidi; Ó Hartaigh, Bríain; Schulman-Marcus, Joshua; Lin, Fay Y; Peña, Jessica M; Hunter, Amanda; Newby, David E; Adamson, Philip D; Min, James K

2018-04-13

This study sought to compare the performance of history-based risk scores in predicting obstructive coronary artery disease (CAD) among patients with stable chest pain from the SCOT-HEART study. Risk scores for estimating pre-test probability of CAD are derived from referral-based populations with a high prevalence of disease. The generalizability of these scores to lower prevalence populations in the initial patient encounter for chest pain is uncertain. We compared 3 scores among patients with suspected CAD in the coronary computed tomographic angiography (CTA) randomized arm of the SCOT-HEART study for the outcome of obstructive CAD by coronary CTA: the updated Diamond-Forrester score (UDF), CAD Consortium clinical score (CAD2), and CONFIRM risk score (CRS). We tested calibration with goodness-of-fit, discrimination with area under the receiver-operating curve (AUC), and reclassification with net reclassification improvement (NRI) to identify low-risk patients. In 1,738 patients (58 ± 10 years and 44.0% women), overall calibration was best for UDF, with underestimation by CRS and CAD2. Discrimination by AUC was highest for CAD2 at 0.79 (95% confidence interval [CI]: 0.77 to 0.81) than for UDF (0.77 [95% CI: 0.74 to 0.79]) or CRS (0.75 [95% CI: 0.73 to 0.77]) (p < 0.001 for both comparisons). Reclassification of low-risk patients at the 10% probability threshold was best for CAD2 (NRI 0.31, 95% CI: 0.27 to 0.35) followed by CRS (NRI 0.21, 95% CI: 0.17 to 0.25) compared with UDF (p < 0.001 for all comparisons), with a consistent trend at the 15% threshold. In this multicenter clinic-based cohort of patients with suspected CAD and uniform CAD evaluation by coronary CTA, CAD2 provided the best discrimination and classification, despite overestimation of obstructive CAD as evaluated by coronary CTA. CRS exhibited intermediate performance followed by UDF for discrimination and reclassification. Copyright © 2018. Published by Elsevier Inc.

Altered lignin biosynthesis improves cellulosic bioethanol production in transgenic maize plants down-regulated for cinnamyl alcohol dehydrogenase.

PubMed

Fornalé, Silvia; Capellades, Montserrat; Encina, Antonio; Wang, Kan; Irar, Sami; Lapierre, Catherine; Ruel, Katia; Joseleau, Jean-Paul; Berenguer, Jordi; Puigdomènech, Pere; Rigau, Joan; Caparrós-Ruiz, David

2012-07-01

Cinnamyl alcohol dehydrogenase (CAD) is a key enzyme involved in the last step of monolignol biosynthesis. The effect of CAD down-regulation on lignin production was investigated through a transgenic approach in maize. Transgenic CAD-RNAi plants show a different degree of enzymatic reduction depending on the analyzed tissue and show alterations in cell wall composition. Cell walls of CAD-RNAi stems contain a lignin polymer with a slight reduction in the S-to-G ratio without affecting the total lignin content. In addition, these cell walls accumulate higher levels of cellulose and arabinoxylans. In contrast, cell walls of CAD-RNAi midribs present a reduction in the total lignin content and of cell wall polysaccharides. In vitro degradability assays showed that, although to a different extent, the changes induced by the repression of CAD activity produced midribs and stems more degradable than wild-type plants. CAD-RNAi plants grown in the field presented a wild-type phenotype and produced higher amounts of dry biomass. Cellulosic bioethanol assays revealed that CAD-RNAi biomass produced higher levels of ethanol compared to wild-type, making CAD a good target to improve both the nutritional and energetic values of maize lignocellulosic biomass.

Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns.

PubMed

Kwon, Taek-Ka; Pak, Hyun-Soon; Yang, Jae-Ho; Han, Jung-Suk; Lee, Jai-Bong; Kim, Sung-Hun; Yeo, In-Sung

2013-05-01

All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident. Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns. THE MEAN FRACTURE STRENGTHS WERE AS FOLLOWS: 54.9 ± 15.6 N for the Lava CAD/CAM zirconia crowns and 87.0 ± 16.0 N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain. The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain.

Potential effect of CAD systems on the detection of actionable nodules in chest CT scans during routine reporting

NASA Astrophysics Data System (ADS)

Wormanns, Dag; Beyer, Florian; Butzbach, Arnauld; Zierott, Livia; Heindel, Walter

2006-03-01

The purpose of the presented study was to determine the impact of two different CAD systems used as concur-rent reader for detection of actionable nodules (>4 mm) on the interpretation of chest CT scans during routine reporting. Fifty consecutive MDCT scans (1 mm or 1.25 mm slice thickness, 0.8 mm reconstruction increment) were se-lected from clinical routine. All cases were read by a resident and a staff radiologist, and a written report was available in the radiology information system (RIS). The RIS report mentioned at least one actionable pulmonary nodule in 18 cases (50%) and did not report any pulmonary nodule in the remaining 32 cases. Two different recent CAD systems were independently applied to the 50 CT scans as concurrent reader with two radiologists: Siemens LungCare NEV and MEDIAN CAD-Lung. Two radiologists independently reviewed the CAD results and determined if a CAD result was a true positive or a false positive finding. Patients were classified into two groups: in group A if at least one actionable nodule was detected and in group B if no actionable nodules were found. The effect of CAD on routine reporting was simulated as set union of the findings of routine reporting and CAD thus applying CAD as concurrent reader. According to the RIS report group A (patients with at least one actionable nodule) contained 18 cases (36% of all 50 cases), and group B contained 32 cases. Application of a CAD system as concurrent reader resulted in detec-tion of additional CT scans with actionable nodules and reclassification into group A in 16 resp. 18 cases (radi-ologist 1 resp. radiologist 2) with Siemens NEV and in 19 resp. 18 cases with MEDIAN CAD-Lung. In seven cases MEDIAN CAD-Lung and in four cases Siemens NEV reclassified a case into group A while the other CAD system missed the relevant finding. Sensitivity on a nodule (>4 mm) base was .45 for Siemens NEV and .55 for MEDIAN CAD-Lung; the difference was not yet significant (p=.077). In our study use of CAD as second reader in routine reporting doubled the percentage of patients with actionable nodules larger than 4 mm.

Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials.

PubMed

Peumans, Marleen; Valjakova, Emilija Bajraktarova; De Munck, Jan; Mishevska, Cece Bajraktarova; Van Meerbeek, Bart

To evaluate the influence of different surface treatments of six novel CAD/CAM materials on the bonding effectiveness of two luting composites. Six different CAD/CAM materials were tested: four ceramics - Vita Mark II; IPS Empress CAD and IPS e.max CAD; Celtra Duo - one hybrid ceramic, Vita Enamic, and one composite CAD/CAM block, Lava Ultimate. A total of 60 blocks (10 per material) received various mechanical surface treatments: 1. 600-grit SiC paper; 2. sandblasting with 30-μm Al2O3; 3. tribochemical silica coating (CoJet). Subsequent chemical surface treatments involved either no further treatment (control), HF acid etching (HF), silanization (S, or HF acid etching followed by silanization (HF+S). Two specimens with the same surface treatment were bonded together using two dual-curing luting composites: Clearfil Esthetic Cement (self-etching) or Panavia SA Cement (self-adhesive). After 1 week of water storage, the microtensile bond strength of the sectioned microspecimens was measured and the failure mode was evaluated. The bonding performance of the six CAD/CAM materials was significantly influenced by surface treatment (linear mixed models, p < 0.05). The luting cement had a significant influence on bond strength for Celtra Duo and Lava Ultimate (linear mixed models, p < 0.05). Mechanical surface treatment significantly influenced the bond strength for Celtra Duo (p = 0.0117), IPS e.max CAD (p = 0.0115), and Lava Ultimate (p < 0.0001). Different chemical surface treatments resulted in the highest bond strengths for the six CAD/CAM materials: Vita Mark II and IPS Empress CAD: S, HF+S; Celtra Duo: HF, HF+S; IPS e.max CAD: HF+S; Vita Enamic: HF+S, S. For Lava Ultimate, the highest bond strengths were obtained with HF, S, HF+S. Failure analysis showed a relation between bond strength and failure type: more mixed failures were observed with higher bond strengths. Mainly adhesive failures were noticed if no further surface treatment was done. The percentage of adhesive failures was higher for CAD/CAM materials with higher flexural strength (Celtra Duo, IPS e.max CAD, and Lava Ultimate). The bond strength of luting composites to novel CAD/CAM materials is influenced by surface treatment. For each luting composite, an adhesive cementation protocol can be specified in order to obtain the highest bond to the individual CAD/CAM materials.

The Digital Space Shuttle, 3D Graphics, and Knowledge Management

NASA Technical Reports Server (NTRS)

Gomez, Julian E.; Keller, Paul J.

2003-01-01

The Digital Shuttle is a knowledge management project that seeks to define symbiotic relationships between 3D graphics and formal knowledge representations (ontologies). 3D graphics provides geometric and visual content, in 2D and 3D CAD forms, and the capability to display systems knowledge. Because the data is so heterogeneous, and the interrelated data structures are complex, 3D graphics combined with ontologies provides mechanisms for navigating the data and visualizing relationships.

Impact of Detergents on Membrane Protein Complex Isolation.

PubMed

Lee, Yu-Chen; Bååth, Jenny Arnling; Bastle, Ryan M; Bhattacharjee, Sonali; Cantoria, Mary Jo; Dornan, Mark; Gamero-Estevez, Enrique; Ford, Lenzie; Halova, Lenka; Kernan, Jennifer; Kürten, Charlotte; Li, Siran; Martinez, Jerahme; Sachan, Nalani; Sarr, Medoune; Shan, Xiwei; Subramanian, Nandhitha; Rivera, Keith; Pappin, Darryl; Lin, Sue-Hwa

2018-01-05

Detergents play an essential role during the isolation of membrane protein complexes. Inappropriate use of detergents may affect the native fold of the membrane proteins, their binding to antibodies, or their interaction with partner proteins. Here we used cadherin-11 (Cad11) as an example to examine the impact of detergents on membrane protein complex isolation. We found that mAb 1A5 could immunoprecipitate Cad11 when membranes were solubilized by dodecyl maltoside (DDM) but not by octylglucoside, suggesting that octylglucoside interferes with Cad11-mAb 1A5 interaction. Furthermore, we compared the effects of Brij-35, Triton X-100, cholate, CHAPSO, Zwittergent 3-12, Deoxy BIG CHAP, and digitonin on Cad11 solubilization and immunoprecipitation. We found that all detergents except Brij-35 could solubilize Cad11 from the membrane. Upon immunoprecipitation, we found that β-catenin, a known cadherin-interacting protein, was present in Cad11 immune complex among the detergents tested except Brij-35. However, the association of p120 catenin with Cad11 varied depending on the detergents used. Using isobaric tag for relative and absolute quantitation (iTRAQ) to determine the relative levels of proteins in Cad11 immune complexes, we found that DDM and Triton X-100 were more efficient than cholate in solubilization and immunoprecipitation of Cad11 and resulted in the identification of both canonical and new candidate Cad11-interacting proteins.

The clinical role of stress myocardial perfusion imaging in women with suspected coronary artery disease.

PubMed

Mieres, Jennifer H; Rosman, David R; Shaw, Leslee J

2004-01-01

Cardiovascular disease remains the number one cause of mortality for women in the United States, with coronary artery disease (CAD) accounting for 54% of all cardiovascular deaths. CAD claims the lives of more than 250,000 women each year and is therefore the single largest killer of American women. For several decades, the under-representation of women in clinical trials led to both a lack of available sex-specific evidence and a generalized misconception that CAD was a "man's disease." In actuality, not only are women vulnerable to CAD, they typically develop it 10 to 15 years later than men. Furthermore, sex differences exist in the mortality rates of women and men with CAD, such that once CAD is present in women, they have worse outcomes than their male counterparts. Consequently, early and accurate diagnosis of CAD is crucial for reducing mortality rates in women. Stress myocardial perfusion imaging (MPI) using contemporary techniques has been shown to have significant value in the diagnosis and prognosis of CAD in women. In the risk assessment of women with an intermediate clinical pretest likelihood of CAD, using MPI with exercise or pharmacologic stress has been shown to add incremental value to clinical variables or exercise electrocardiogram stress testing alone. This review discusses the clinical role of stress MPI in the management of women with suspected CAD.

A Single Point Mutation Resulting in Cadherin Mislocalization Underpins Resistance against Bacillus thuringiensis Toxin in Cotton Bollworm*

PubMed Central

Xiao, Yutao; Dai, Qing; Hu, Ruqin; Pacheco, Sabino; Yang, Yongbo; Liang, Gemei; Soberón, Mario

2017-01-01

Transgenic plants that produce Bacillus thuringiensis (Bt) crystalline (Cry) toxins are cultivated worldwide to control insect pests. Resistance to B. thuringiensis toxins threatens this technology, and although different resistance mechanisms have been identified, some have not been completely elucidated. To gain new insights into these mechanisms, we performed multiple back-crossing from a 3000-fold Cry1Ac-resistant BtR strain from cotton bollworm (Helicoverpa armigera), isolating a 516-fold Cry1Ac-resistant strain (96CAD). Cry1Ac resistance in 96CAD was tightly linked to a mutant cadherin allele (mHaCad) that contained 35 amino acid substitutions compared with HaCad from a susceptible strain (96S). We observed significantly reduced levels of the mHaCad protein on the surface of the midgut epithelium in 96CAD as compared with 96S. Expression of both cadherin alleles from 96CAD and 96S in insect cells and immunofluorescence localization in insect midgut tissue sections showed that the HaCAD protein from 96S localizes on the cell membrane, whereas the mutant 96CAD-mHaCad was retained in the endoplasmic reticulum (ER). Mapping of the mutations identified a D172G substitution mainly responsible for cadherin mislocalization. Our finding of a mutation affecting membrane receptor trafficking represents an unusual and previously unrecognized B. thuringiensis resistance mechanism. PMID:28082675

HDL subfractions and very early CAD: novel findings from untreated patients in a Chinese cohort.

PubMed

Zhang, Yan; Zhu, Cheng-Gang; Xu, Rui-Xia; Li, Sha; Li, Xiao-Lin; Guo, Yuan-Lin; Wu, Na-Qiong; Gao, Ying; Qing, Ping; Cui, Chuan-Jue; Sun, Jing; Li, Jian-Jun

2016-08-04

Coronary artery disease (CAD) in very young individuals is a rare disease associated with poor prognosis. However, the role of specific lipoprotein subfractions in very young CAD patients (≤45 years) is not established yet. A total of 734 consecutive CAD subjects were enrolled and were classified as very early (n = 81, ≤45), early (n = 304, male: 45-55; female: 45-65), and late (n = 349, male: >55; female: >65) groups. Meanwhile, a group of non-CAD subjects were also enrolled as controls (n = 56, ≤45). The lipoprotein separation was performed using Lipoprint System. As a result, the very early CAD patients have lower large high-density lipoprotein (HDL) subfraction and higher small low-density lipoprotein (LDL) subfraction (p < 0.05). Although body mass index was inversely related to large HDL subfraction, overweight did not influence its association with very early CAD. In the logistic regression analysis, large HDL was inversely [OR 95% CI: 0.872 (0.825-0.922)] while small LDL was positively [1.038 (1.008-1.069)] related to very early CAD. However, after adjusting potential confounders, the association was only significant for large HDL [0.899 (0.848-0.954)]. This study firstly demonstrated that large HDL subfraction was negatively related to very early CAD suggestive of its important role in very early CAD incidence.

Computer-aided detection (CAD) of breast cancer on full field digital and screening film mammograms

NASA Astrophysics Data System (ADS)

Sun, Xuejun; Qian, Wei; Song, Xiaoshan; Qian, Yuyan; Song, Dansheng; Clark, Robert A.

2003-05-01

Full-field digital mammography (FFDM) as a new breast imaging modality has potential to detect more breast cancers or to detect them at smaller sizes and earlier stages compared with screening film mammography (SFM). However, its performance needs verification, and it would pose new problems for the development of CAD methods for breast cancer detection and diagnosis. Performance evaluation of CAD systems on FFDM and SFM has been conducted in this study, respectively. First, an adaptive CAD system employing a series of advanced modules has been developed on FFDM. Second, a standardization approach has been developed to make the CAD system independent of characteristics of digitizer or imaging modalities for mammography. CAD systems developed previously for SFM and developed in this study for FFDM have been evaluated on FFDM and SFM images without and with standardization, respectively, to examine the performance improvement of the CAD system developed in this study. Computerized free-response receiver operating characteristic (FROC) analysis has been adopted as performance evaluation method. Compared with previous one, the CAD system developed in this study demonstrated significantly performance improvements. However, the comparison results have shown that the performances of final CAD system in this study are not significantly different on FFDM and on SFM after standardization. It needs further study on the assessment of CAD system performance on FFDM and SFM modalities.

Genetic loci associated with coronary artery disease harbor evidence of selection and antagonistic pleiotropy

PubMed Central

Byars, Sean G.; Gray, Lesley-Ann; Ripatti, Samuli; Stearns, Stephen C.; Inouye, Michael

2017-01-01

Traditional genome-wide scans for positive selection have mainly uncovered selective sweeps associated with monogenic traits. While selection on quantitative traits is much more common, very few signals have been detected because of their polygenic nature. We searched for positive selection signals underlying coronary artery disease (CAD) in worldwide populations, using novel approaches to quantify relationships between polygenic selection signals and CAD genetic risk. We identified new candidate adaptive loci that appear to have been directly modified by disease pressures given their significant associations with CAD genetic risk. These candidates were all uniquely and consistently associated with many different male and female reproductive traits suggesting selection may have also targeted these because of their direct effects on fitness. We found that CAD loci are significantly enriched for lifetime reproductive success relative to the rest of the human genome, with evidence that the relationship between CAD and lifetime reproductive success is antagonistic. This supports the presence of antagonistic-pleiotropic tradeoffs on CAD loci and provides a novel explanation for the maintenance and high prevalence of CAD in modern humans. Lastly, we found that positive selection more often targeted CAD gene regulatory variants using HapMap3 lymphoblastoid cell lines, which further highlights the unique biological significance of candidate adaptive loci underlying CAD. Our study provides a novel approach for detecting selection on polygenic traits and evidence that modern human genomes have evolved in response to CAD-induced selection pressures and other early-life traits sharing pleiotropic links with CAD. PMID:28640878

Verifying Three-Dimensional Skull Model Reconstruction Using Cranial Index of Symmetry

PubMed Central

Kung, Woon-Man; Chen, Shuo-Tsung; Lin, Chung-Hsiang; Lu, Yu-Mei; Chen, Tzu-Hsuan; Lin, Muh-Shi

2013-01-01

Background Difficulty exists in scalp adaptation for cranioplasty with customized computer-assisted design/manufacturing (CAD/CAM) implant in situations of excessive wound tension and sub-cranioplasty dead space. To solve this clinical problem, the CAD/CAM technique should include algorithms to reconstruct a depressed contour to cover the skull defect. Satisfactory CAM-derived alloplastic implants are based on highly accurate three-dimensional (3-D) CAD modeling. Thus, it is quite important to establish a symmetrically regular CAD/CAM reconstruction prior to depressing the contour. The purpose of this study is to verify the aesthetic outcomes of CAD models with regular contours using cranial index of symmetry (CIS). Materials and methods From January 2011 to June 2012, decompressive craniectomy (DC) was performed for 15 consecutive patients in our institute. 3-D CAD models of skull defects were reconstructed using commercial software. These models were checked in terms of symmetry by CIS scores. Results CIS scores of CAD reconstructions were 99.24±0.004% (range 98.47–99.84). CIS scores of these CAD models were statistically significantly greater than 95%, identical to 99.5%, but lower than 99.6% (p<0.001, p = 0.064, p = 0.021 respectively, Wilcoxon matched pairs signed rank test). These data evidenced the highly accurate symmetry of these CAD models with regular contours. Conclusions CIS calculation is beneficial to assess aesthetic outcomes of CAD-reconstructed skulls in terms of cranial symmetry. This enables further accurate CAD models and CAM cranial implants with depressed contours, which are essential in patients with difficult scalp adaptation. PMID:24204566

Computer Aided Drafting. Instructor's Guide.

ERIC Educational Resources Information Center

Henry, Michael A.

This guide is intended for use in introducing students to the operation and applications of computer-aided drafting (CAD) systems. The following topics are covered in the individual lessons: understanding CAD (CAD versus traditional manual drafting and care of software and hardware); using the components of a CAD system (primary and other input…

Teaching for CAD Expertise

ERIC Educational Resources Information Center

Chester, Ivan

2007-01-01

CAD (Computer Aided Design) has now become an integral part of Technology Education. The recent introduction of highly sophisticated, low-cost CAD software and CAM hardware capable of running on desktop computers has accelerated this trend. There is now quite widespread introduction of solid modeling CAD software into secondary schools but how…

A CAD (Classroom Assessment Design) of a Computer Programming Course

ERIC Educational Resources Information Center

Hawi, Nazir S.

2012-01-01

This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified…

Correlation between HFE gene polymorphisms and increased risk of coronary artery disease among patients with type 2 diabetes in Iran.

PubMed

Saremi, Leila; Saremi, Marzieh; Lotfipanah, Shirin; İmani, Saber; Fu, Junjiang; Zhang, Tianyu

2016-04-19

Diabetes mellitus is a risk factor for cardiovascular diseases (CVDs), which are among the major causes of deaths in type 2 diabetes (T2D). The purpose of the present study was to determine the association of C282Y and H63D mutations in the HFE gene with increased risk of coronary artery disease (CAD) in T2D patients. Two hundred and ninety individuals were divided into two groups: a case group and a control group. Genomic DNA of peripheral venous blood cells was extracted and the HFE gene mutations were analyzed using the PCR-RFLP technique. Data analysis revealed a significant difference between the allele frequencies of H63D and C282Y mutations between the case group and the controls (P < 0.05). The relationships between the GA and GG genotypes in C282Y and H63D mutations in terms of fasting blood sugar (FBS), lipid profile (total cholesterol, triglycerides, high-density lipoproteins (HDL), low-density lipoproteins), body mass index (BMI), HbA1c, micro albuminuria, and creatine levels did not show a significant differences between the two groups (P > 0.05). Using a logistic regression model, BMI, FBS, HDL, and total cholesterol levels were significantly different with independent predictors of CVD (P < 0.05). Our results revealed a significant correlation between C282Y and H63D mutations and the development of CAD in T2D patients.

Acid Evolution of Escherichia coli K-12 Eliminates Amino Acid Decarboxylases and Reregulates Catabolism.

PubMed

He, Amanda; Penix, Stephanie R; Basting, Preston J; Griffith, Jessie M; Creamer, Kaitlin E; Camperchioli, Dominic; Clark, Michelle W; Gonzales, Alexandra S; Chávez Erazo, Jorge Sebastian; George, Nadja S; Bhagwat, Arvind A; Slonczewski, Joan L

2017-06-15

Acid-adapted strains of Escherichia coli K-12 W3110 were obtained by serial culture in medium buffered at pH 4.6 (M. M. Harden, A. He, K. Creamer, M. W. Clark, I. Hamdallah, K. A. Martinez, R. L. Kresslein, S. P. Bush, and J. L. Slonczewski, Appl Environ Microbiol 81:1932-1941, 2015, https://doi.org/10.1128/AEM.03494-14). Revised genomic analysis of these strains revealed insertion sequence (IS)-driven insertions and deletions that knocked out regulators CadC (acid induction of lysine decarboxylase), GadX (acid induction of glutamate decarboxylase), and FNR (anaerobic regulator). Each acid-evolved strain showed loss of one or more amino acid decarboxylase systems, which normally help neutralize external acid (pH 5 to 6) and increase survival in extreme acid (pH 2). Strains from populations B11, H9, and F11 had an IS 5 insertion or IS-mediated deletion in cadC , while population B11 had a point mutation affecting the arginine activator adiY The cadC and adiY mutants failed to neutralize acid in the presence of exogenous lysine or arginine. In strain B11-1, reversion of an rpoC (RNA polymerase) mutation partly restored arginine-dependent neutralization. All eight strains showed deletion or downregulation of the Gad acid fitness island. Strains with the Gad deletion lost the ability to produce GABA (gamma-aminobutyric acid) and failed to survive extreme acid. Transcriptome sequencing (RNA-seq) of strain B11-1 showed upregulated genes for catabolism of diverse substrates but downregulated acid stress genes (the biofilm regulator ariR , yhiM , and Gad). Other strains showed downregulation of H 2 consumption mediated by hydrogenases ( hya and hyb ) which release acid. Strains F9-2 and F9-3 had a deletion of fnr and showed downregulation of FNR-dependent genes ( dmsABC , frdABCD , hybABO , nikABCDE , and nrfAC ). Overall, strains that had evolved in buffered acid showed loss or downregulation of systems that neutralize unbuffered acid and showed altered regulation of catabolism. IMPORTANCE Experimental evolution of an enteric bacterium under a narrow buffered range of acid pH leads to loss of genes that enhance fitness above or below the buffered pH range, including loss of enzymes that may raise external pH in the absence of buffer. Prominent modes of evolutionary change involve IS-mediated insertions and deletions that knock out key regulators. Over generations of acid stress, catabolism undergoes reregulation in ways that differ for each evolving strain. Copyright © 2017 American Society for Microbiology.

Incorporating CAD Instruction into the Drafting Curriculum.

ERIC Educational Resources Information Center

Yuen, Steve Chi-Yin

1990-01-01

If education is to meet the challenged posed by the U.S. productivity crisis and the large number of computer-assisted design (CAD) workstations forecast as necessary in the future, schools must integrate CAD into the drafting curriculum and become aggressive in providing CAD training. Teachers need to maintain close contact with local industries…

Education and Training Packages for CAD/CAM.

ERIC Educational Resources Information Center

Wright, I. C.

1986-01-01

Discusses educational efforts in the fields of Computer Assisted Design and Manufacturing (CAD/CAM). Describes two educational training initiatives underway in the United Kingdom, one of which is a resource materials package for teachers of CAD/CAM at the undergraduate level, and the other a training course for managers of CAD/CAM systems. (TW)

21 CFR 872.3661 - Optical Impression Systems for CAD/CAM.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Optical Impression Systems for CAD/CAM. 872.3661... (CAD/CAM) is a device used to record the topographical characteristics of teeth, dental impressions, or... Design and Manufacturing (CAD/CAM) of Dental Restorations; Guidance for Industry and FDA.” For the...

21 CFR 872.3661 - Optical Impression Systems for CAD/CAM.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Optical Impression Systems for CAD/CAM. 872.3661... (CAD/CAM) is a device used to record the topographical characteristics of teeth, dental impressions, or... Design and Manufacturing (CAD/CAM) of Dental Restorations; Guidance for Industry and FDA.” For the...

21 CFR 872.3661 - Optical Impression Systems for CAD/CAM.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Optical Impression Systems for CAD/CAM. 872.3661... (CAD/CAM) is a device used to record the topographical characteristics of teeth, dental impressions, or... Design and Manufacturing (CAD/CAM) of Dental Restorations; Guidance for Industry and FDA.” For the...

CAD/CAM. High-Technology Training Module.

ERIC Educational Resources Information Center

Zuleger, Robert

This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

Cool-and Unusual-CAD Applications

ERIC Educational Resources Information Center

Calhoun, Ken

2004-01-01

This article describes several very useful applications of AutoCAD that may lie outside the normal scope of application. AutoCAD commands used in this article are based on AutoCAD 2000I. The author and his students used a Hewlett Packard 750C DesignJet plotter for plotting. (Contains 5 figures and 5 photos.)

CAD Skills Increased through Multicultural Design Project

ERIC Educational Resources Information Center

Clemons, Stephanie

2006-01-01

This article discusses how students in a college-entry-level CAD course researched four generations of their family histories and documented cultural and symbolic influences within their family backgrounds. AutoCAD software was then used to manipulate those cultural and symbolic images to create the design for a multicultural area rug. AutoCAD was…

Stress-induced alteration of left ventricular eccentricity: An additional marker of multivessel CAD.

PubMed

Gimelli, Alessia; Liga, Riccardo; Giorgetti, Assuero; Casagranda, Mirta; Marzullo, Paolo

2017-03-28

Abnormal left ventricular (LV) eccentricity index (EI) is a marker of adverse cardiac remodeling. However, the interaction between stress-induced alterations of EI and major cardiac parameters has not been explored. We sought to evaluate the relationship between LV EI and coronary artery disease (CAD) burden in patients submitted to myocardial perfusion imaging (MPI). Three-hundred and forty-three patients underwent MPI and coronary angiography. LV ejection fraction (EF) and EI were computed from gated stress images as measures of stress-induced functional impairment. One-hundred and thirty-six (40%), 122 (35%), and 85 (25%) patients had normal coronary arteries, single-vessel CAD, and multivessel CAD, respectively. Post-stress EI was lower in patients with multivessel CAD than in those with normal coronary arteries and single-vessel CAD (P = 0.001). This relationship was confirmed only in patients undergoing exercise stress test, where a lower post-stress EI predicted the presence of multivessel CAD (P = 0.039). Post-stress alterations of LV EI on MPI may unmask the presence of multivessel CAD.

[The CAD-S, an instrument for the assessment of adaptation to divorce - separation].

PubMed

Yárnoz Yaben, Sagrario; Comino González, Priscila

2010-02-01

The CAD-S, an Instrument for the Assessment of Adaptation to Divorce - Separation. This paper presents an instrument for the evaluation of the adaptation to divorce-separation. The CAD-S is a questionnaire created in Spanish, made up of 20 items whose aim is the evaluation of the family's adaptation to divorce-separation, using one of the parents as informant. Data were collected in four different samples of divorced persons and their children from different autonomous comunities from the Spanish state. 223 parents and 160 children from divorced families took part in this study. Four factors emerged, accounting for 52.39 percent of the total variance: psychological and emotional difficulties, conflict with the ex-partner, disposition to co-parentality, and negative outcomes of separation for children. The results suggest that CAD-S appears to be a reliable and valid instrument, with high internal consistency (Cronbach's alpha) and adequate construct validity supported by its relations with measures of satisfaction with life (SWLS), in the case of parents, and conduct problems (CBCL) for children.

Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

PubMed Central

Kwon, Taek-Ka; Pak, Hyun-Soon; Han, Jung-Suk; Lee, Jai-Bong; Kim, Sung-Hun

2013-01-01

PURPOSE All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident. MATERIALS AND METHODS Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns. RESULTS The mean fracture strengths were as follows: 54.9 ± 15.6 N for the Lava CAD/CAM zirconia crowns and 87.0 ± 16.0 N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain. CONCLUSION The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain. PMID:23755332

Circulating sortilin level as a potential biomarker for coronary atherosclerosis and diabetes mellitus.

PubMed

Oh, Tae Jung; Ahn, Chang Ho; Kim, Bo-Rahm; Kim, Kyoung Min; Moon, Jae Hoon; Lim, Soo; Park, Kyong Soo; Lim, Cheong; Jang, HakChul; Choi, Sung Hee

2017-07-20

A previous genome-wide association study showed that a genetic variant of sortilin was associated with the risk of coronary artery disease (CAD). However, the role of circulating sortilin is still unknown. We investigated the potential role of plasma sortilin as a biomarker for CAD and diabetes mellitus. We enrolled statin-naïve subjects with CAD (n = 31) who underwent coronary artery bypass surgery and control subjects (n = 116) who were free from CAD as evaluated by coronary CT angiography. The presence of diabetes mellitus was evaluated and plasma sortilin levels were measured with a commercial ELISA kit. Plasma sortilin levels were higher in subjects with CAD and subjects with diabetes mellitus than in those without CAD or diabetes mellitus. Subjects in the highest sortilin tertile group were older and had higher glucose and HbA1c levels, but lipid profiles in the three tertile groups were comparable. Multivariable logistic regression analysis revealed that sortilin levels were independently associated with CAD. In addition, the receiver operating characteristic curve analysis showed that plasma sortilin levels could identify the presence of CAD or diabetes mellitus. Elevated circulating sortilin levels are associated with CAD and diabetes mellitus and can be used as a biomarker of both diseases in statin-naïve subjects.

[Computed tomography with computer-assisted detection of pulmonary nodules in dogs and cats].

PubMed

Niesterok, C; Piesnack, S; Köhler, C; Ludewig, E; Alef, M; Kiefer, I

2015-01-01

The aim of this study was to assess the potential benefit of computer-assisted detection (CAD) of pulmonary nodules in veterinary medicine. Therefore, the CAD rate was compared to the detection rates of two individual examiners in terms of its sensitivity and false-positive findings. We included 51 dogs and 16 cats with pulmonary nodules previously diagnosed by computed tomography. First, the number of nodules ≥ 3 mm was recorded for each patient by two independent examiners. Subsequently, each examiner used the CAD software for automated nodule detection. With the knowledge of the CAD results, a final consensus decision on the number of nodules was achieved. The software used was a commercially available CAD program. The sensitivity of examiner 1 was 89.2%, while that of examiner 2 reached 87.4%. CAD had a sensitivity of 69.4%. With CAD, the sensitivity of examiner 1 increased to 94.7% and that of examiner 2 to 90.8%. The CAD-system, which we used in our study, had a moderate sensitivity of 69.4%. Despite its severe limitations, with a high level of false-positive and false-negative results, CAD increased the examiners' sensitivity. Therefore, its supportive role in diagnostics appears to be evident.

Sensing and adaptation to low pH mediated by inducible amino acid decarboxylases in Salmonella.

PubMed

Viala, Julie P M; Méresse, Stéphane; Pocachard, Bérengère; Guilhon, Aude-Agnès; Aussel, Laurent; Barras, Frédéric

2011-01-01

During the course of infection, Salmonella enterica serovar Typhimurium must successively survive the harsh acid stress of the stomach and multiply into a mild acidic compartment within macrophages. Inducible amino acid decarboxylases are known to promote adaptation to acidic environments. Three low pH inducible amino acid decarboxylases were annotated in the genome of S. Typhimurium, AdiA, CadA and SpeF, which are specific for arginine, lysine and ornithine, respectively. In this study, we characterized and compared the contributions of those enzymes in response to acidic challenges. Individual mutants as well as a strain deleted for the three genes were tested for their ability (i) to survive an extreme acid shock, (ii) to grow at mild acidic pH and (iii) to infect the mouse animal model. We showed that the lysine decarboxylase CadA had the broadest range of activity since it both had the capacity to promote survival at pH 2.3 and growth at pH 4.5. The arginine decarboxylase AdiA was the most performant in protecting S. Typhimurium from a shock at pH 2.3 and the ornithine decarboxylase SpeF conferred the best growth advantage under anaerobiosis conditions at pH 4.5. We developed a GFP-based gene reporter to monitor the pH of the environment as perceived by S. Typhimurium. Results showed that activities of the lysine and ornithine decarboxylases at mild acidic pH did modify the local surrounding of S. Typhimurium both in culture medium and in macrophages. Finally, we tested the contribution of decarboxylases to virulence and found that these enzymes were dispensable for S. Typhimurium virulence during systemic infection. In the light of this result, we examined the genomes of Salmonella spp. normally responsible of systemic infection and observed that the genes encoding these enzymes were not well conserved, supporting the idea that these enzymes may be not required during systemic infection.

E-selectin S128R polymorphism and severe coronary artery disease in Arabs

PubMed Central

Abu-Amero, Khaled K; Al-Boudari, Olayan M; Mohamed, Gamal H; Dzimiri, Nduna

2006-01-01

Background The E-selectin p. S128R (g. A561C) polymorphism has been associated with the presence of angiographic coronary artery disease (CAD) in some populations, but no data is currently available on its association with CAD in Arabs. Methods In the present study, we determined the potential relevance of the E-selectin S128R polymorphism for severe CAD and its associated risk factors among Arabs. We genotyped Saudi Arabs for this polymorphism by PCR, followed by restriction enzyme digestion. Results The polymorphism was determined in 556 angiographically confirmed severe CAD patients and 237 control subjects with no CAD as established angiographically (CON). Frequencies of the S/S, S/R and R/R genotypes were found as 81.1%, 16.6% and 2.3% in CAD patients and 87.8%, 11.8%, and 0.4% in CON subjects, respectively. The frequency of the mutant 128R allele was higher among CAD patients compared to CON group (11% vs. 6%; odds ratio = 1.76; 95% CI 1.14 – 2.72; p = .007), thus indicating a significant association of the 128R allele with CAD among our population. However, the stepwise logistic regression for the 128R allele and different CAD risk factors showed no significant association. Conclusion Among the Saudi population, The E-selectin p. S128R (g. A561C) polymorphism was associated with angiographic CAD in Univariate analysis, but lost its association in multivariate analysis. PMID:16756647

Integrating CAD modules in a PACS environment using a wide computing infrastructure.

PubMed

Suárez-Cuenca, Jorge J; Tilve, Amara; López, Ricardo; Ferro, Gonzalo; Quiles, Javier; Souto, Miguel

2017-04-01

The aim of this paper is to describe a project designed to achieve a total integration of different CAD algorithms into the PACS environment by using a wide computing infrastructure. The aim is to build a system for the entire region of Galicia, Spain, to make CAD accessible to multiple hospitals by employing different PACSs and clinical workstations. The new CAD model seeks to connect different devices (CAD systems, acquisition modalities, workstations and PACS) by means of networking based on a platform that will offer different CAD services. This paper describes some aspects related to the health services of the region where the project was developed, CAD algorithms that were either employed or selected for inclusion in the project, and several technical aspects and results. We have built a standard-based platform with which users can request a CAD service and receive the results in their local PACS. The process runs through a web interface that allows sending data to the different CAD services. A DICOM SR object is received with the results of the algorithms stored inside the original study in the proper folder with the original images. As a result, a homogeneous service to the different hospitals of the region will be offered. End users will benefit from a homogeneous workflow and a standardised integration model to request and obtain results from CAD systems in any modality, not dependant on commercial integration models. This new solution will foster the deployment of these technologies in the entire region of Galicia.

Coronary Artery Disease and Reticular Macular Disease, a Subphenotype of Early Age-Related Macular Degeneration.

PubMed

Cymerman, Rachel M; Skolnick, Adam H; Cole, William J; Nabati, Camellia; Curcio, Christine A; Smith, R Theodore

2016-11-01

Reticular macular disease (RMD) is the highest risk form of early age-related macular degeneration and also specifically confers decreased longevity. However, because RMD requires advanced retinal imaging for adequate detection of its characteristic subretinal drusenoid deposits (SDD), it has not yet been completely studied with respect to coronary artery disease (CAD), the leading cause of death in the developed world. Because CAD appears in middle age, our purpose was to screen patients aged 45-80 years, documented either with or without CAD, to determine if CAD is associated with RMD. A prospective cohort study of patients with documented CAD status and no known retinal disease in a clinical practice setting at one institution. Subjects and Controls: A number of 76 eyes from 38 consecutive patients (23 with documented CAD, 15 controls documented without CAD; 47.4% female; mean age 66.7 years). Patients were imaged with near-infrared reflectance/spectral domain optical coherence tomography and assessed in masked fashion by two graders for the presence of SDD lesions of RMD and soft drusen. Presence or absence of RMD/SDD and soft drusen. RMD was more frequent in patients with CAD versus those without (Relative Risk [RR] = 2.1, CI = 1.08-3.95, P = 0.03). There was no association of CAD with soft drusen. A specific relationship between CAD and RMD suggests common systemic causes for both and warrants further study.

Accuracy of computer-aided diagnosis based on narrow-band imaging endocytoscopy for diagnosing colorectal lesions: comparison with experts.

PubMed

Misawa, Masashi; Kudo, Shin-Ei; Mori, Yuichi; Takeda, Kenichi; Maeda, Yasuharu; Kataoka, Shinichi; Nakamura, Hiroki; Kudo, Toyoki; Wakamura, Kunihiko; Hayashi, Takemasa; Katagiri, Atsushi; Baba, Toshiyuki; Ishida, Fumio; Inoue, Haruhiro; Nimura, Yukitaka; Oda, Msahiro; Mori, Kensaku

2017-05-01

Real-time characterization of colorectal lesions during colonoscopy is important for reducing medical costs, given that the need for a pathological diagnosis can be omitted if the accuracy of the diagnostic modality is sufficiently high. However, it is sometimes difficult for community-based gastroenterologists to achieve the required level of diagnostic accuracy. In this regard, we developed a computer-aided diagnosis (CAD) system based on endocytoscopy (EC) to evaluate cellular, glandular, and vessel structure atypia in vivo. The purpose of this study was to compare the diagnostic ability and efficacy of this CAD system with the performances of human expert and trainee endoscopists. We developed a CAD system based on EC with narrow-band imaging that allowed microvascular evaluation without dye (ECV-CAD). The CAD algorithm was programmed based on texture analysis and provided a two-class diagnosis of neoplastic or non-neoplastic, with probabilities. We validated the diagnostic ability of the ECV-CAD system using 173 randomly selected EC images (49 non-neoplasms, 124 neoplasms). The images were evaluated by the CAD and by four expert endoscopists and three trainees. The diagnostic accuracies for distinguishing between neoplasms and non-neoplasms were calculated. ECV-CAD had higher overall diagnostic accuracy than trainees (87.8 vs 63.4%; [Formula: see text]), but similar to experts (87.8 vs 84.2%; [Formula: see text]). With regard to high-confidence cases, the overall accuracy of ECV-CAD was also higher than trainees (93.5 vs 71.7%; [Formula: see text]) and comparable to experts (93.5 vs 90.8%; [Formula: see text]). ECV-CAD showed better diagnostic accuracy than trainee endoscopists and was comparable to that of experts. ECV-CAD could thus be a powerful decision-making tool for less-experienced endoscopists.

Costs and clinical outcomes in individuals without known coronary artery disease undergoing coronary computed tomographic angiography from an analysis of Medicare category III transaction codes.

PubMed

Min, James K; Shaw, Leslee J; Berman, Daniel S; Gilmore, Amanda; Kang, Ning

2008-09-15

Multidetector coronary computed tomographic angiography (CCTA) demonstrates high accuracy for the detection and exclusion of coronary artery disease (CAD) and predicts adverse prognosis. To date, opportunity costs relating the clinical and economic outcomes of CCTA compared with other methods of diagnosing CAD, such as myocardial perfusion single-photon emission computed tomography (SPECT), remain unknown. An observational, multicenter, patient-level analysis of patients without known CAD who underwent CCTA or SPECT was performed. Patients who underwent CCTA (n = 1,938) were matched to those who underwent SPECT (n = 7,752) on 8 demographic and clinical characteristics and 2 summary measures of cardiac medications and co-morbidities and were evaluated for 9-month expenditures and clinical outcomes. Adjusted total health care and CAD expenditures were 27% (p <0.001) and 33% (p <0.001) lower, respectively, for patients who underwent CCTA compared with those who underwent SPECT, by an average of $467 (95% confidence interval $99 to $984) for CAD expenditures per patient. Despite lower total health care expenditures for CCTA, no differences were observed for rates of adverse cardiovascular events, including CAD hospitalizations (4.2% vs 4.1%, p = NS), CAD outpatient visits (17.4% vs 13.3%, p = NS), myocardial infarction (0.4% vs 0.6%, p = NS), and new-onset angina (3.0% vs 3.5%, p = NS). Patients without known CAD who underwent CCTA, compared with matched patients who underwent SPECT, incurred lower overall health care and CAD expenditures while experiencing similarly low rates of CAD hospitalization, outpatient visits, myocardial infarction, and angina. In conclusion, these data suggest that CCTA may be a cost-efficient alternative to SPECT for the initial coronary evaluation of patients without known CAD.

The Effect of Previous Coronary Artery Revascularization on the Adverse Cardiac Events Ninety days After Total Joint Arthroplasty.

PubMed

Feng, Bin; Lin, Jin; Jin, Jin; Qian, Wenwei; Cao, Shiliang; Weng, Xisheng

2018-01-01

Although coronary artery revascularization therapies are effective for treating coronary artery disease (CAD), these patients may be more susceptible to adverse cardiac events during later non-cardiac surgeries. The purpose of this study is to evaluate post-operative 90-day complications of total joint arthroplasty (TJA) in CAD patients with a history of CAD and to study the risk factors for cardiac complications. We performed a retrospective analysis of TJA patients between 2005 and 2015 at our institute by summarizing the history of CAD, cardiac revascularization, and cardiac complications within 90 days after the operation. Multivariate logistic regression was performed to identify the factors that predicted cardiac complications within 90 days after the operation. A total of 4414 patients were included; of these, 64 underwent cardiac revascularization and 201 CAD patients underwent medical therapy other than revascularization. All the revascularization had history of myocardial infarction (MI). The rate of cardiac complications within 90 days for the CAD with revascularization was 18.7%, 18.4% for the CAD without revascularization, and 2.0% for the non-CAD group. A history of CAD and revascularization, bilateral TJA, general anesthesia, body mass index ≥30 kg/m 2 , and history of MI were associated with a higher risk of cardiac complications. Patients who underwent TJA within 2 years after cardiac revascularization had a significantly higher cardiac complication rate, and the risk decreased with time. There is an increased risk of cardiac complications within 90 days after the operation among TJA patients with a history of CAD. Revascularization cannot significantly reduce the risk of cardiac complications after TJA for CAD patients. However, the risk decreased as the interval between revascularization and TJA increased. Copyright © 2017 Elsevier Inc. All rights reserved.

Fracture and Fatigue Resistance of Cemented versus Fused CAD-on Veneers over Customized Zirconia Implant Abutments.

PubMed

Nossair, Shereen Ahmed; Aboushelib, Moustafa N; Morsi, Tarek Salah

2015-01-05

To evaluate the fracture mechanics of cemented versus fused CAD-on veneers on customized zirconia implant abutments. Forty-five identical customized CAD/CAM zirconia implant abutments (0.5 mm thick) were prepared and seated on short titanium implant abutments (Ti base). A second scan was made to fabricate 45 CAD-on veneers (IPS Empress CAD, A2). Fifteen CAD-on veneers were cemented on the zirconia abutments (Panavia F2.0). Another 15 were fused to the zirconia abutments using low-fusing glass, while manually layered veneers served as control (n = 15). The restorations were subjected to artificial aging (3.2 million cycles between 5 and 10 kg in a water bath at 37°C) before being axially loaded to failure. Fractured specimens were examined using scanning electron microscopy to detect fracture origin, location, and size of critical crack. Stress at failure was calculated using fractography principles (alpha = 0.05). Cemented CAD-on restorations demonstrated significantly higher (F = 72, p < 0.001) fracture load compared to fused CAD-on and manually layered restorations. Fractographic analysis of fractured specimens indicated that cemented CAD-on veneers failed due to radial cracks originating from the veneer/resin interface. Branching of the critical crack was observed in the bulk of the veneer. Fused CAD-on veneers demonstrated cohesive fracture originating at the thickest part of the veneer ceramic, while manually layered veneers failed due to interfacial fracture at the zirconia/veneer interface. Within the limitations of this study, cemented CAD-on veneers on customized zirconia implant abutments demonstrated higher fracture than fused and manually layered veneers. © 2014 by the American College of Prosthodontists.

Expression pattern of two paralogs encoding cinnamyl alcohol dehydrogenases in Arabidopsis. Isolation and characterization of the corresponding mutants.

PubMed

Sibout, Richard; Eudes, Aymerick; Pollet, Brigitte; Goujon, Thomas; Mila, Isabelle; Granier, Fabienne; Séguin, Armand; Lapierre, Catherine; Jouanin, Lise

2003-06-01

Studying Arabidopsis mutants of the phenylpropanoid pathway has unraveled several biosynthetic steps of monolignol synthesis. Most of the genes leading to monolignol synthesis have been characterized recently in this herbaceous plant, except those encoding cinnamyl alcohol dehydrogenase (CAD). We have used the complete sequencing of the Arabidopsis genome to highlight a new view of the complete CAD gene family. Among nine AtCAD genes, we have identified the two distinct paralogs AtCAD-C and AtCAD-D, which share 75% identity and are likely to be involved in lignin biosynthesis in other plants. Northern, semiquantitative restriction fragment-length polymorphism-reverse transcriptase-polymerase chain reaction and western analysis revealed that AtCAD-C and AtCAD-D mRNA and protein ratios were organ dependent. Promoter activities of both genes are high in fibers and in xylem bundles. However, AtCAD-C displayed a larger range of sites of expression than AtCAD-D. Arabidopsis null mutants (Atcad-D and Atcad-C) corresponding to both genes were isolated. CAD activities were drastically reduced in both mutants, with a higher impact on sinapyl alcohol dehydrogenase activity (6% and 38% of residual sinapyl alcohol dehydrogenase activities for Atcad-D and Atcad-C, respectively). Only Atcad-D showed a slight reduction in Klason lignin content and displayed modifications of lignin structure with a significant reduced proportion of conventional S lignin units in both stems and roots, together with the incorporation of sinapaldehyde structures ether linked at Cbeta. These results argue for a substantial role of AtCAD-D in lignification, and more specifically in the biosynthesis of sinapyl alcohol, the precursor of S lignin units.

Expression Pattern of Two Paralogs Encoding Cinnamyl Alcohol Dehydrogenases in Arabidopsis. Isolation and Characterization of the Corresponding Mutants1

PubMed Central

Sibout, Richard; Eudes, Aymerick; Pollet, Brigitte; Goujon, Thomas; Mila, Isabelle; Granier, Fabienne; Séguin, Armand; Lapierre, Catherine; Jouanin, Lise

2003-01-01

Studying Arabidopsis mutants of the phenylpropanoid pathway has unraveled several biosynthetic steps of monolignol synthesis. Most of the genes leading to monolignol synthesis have been characterized recently in this herbaceous plant, except those encoding cinnamyl alcohol dehydrogenase (CAD). We have used the complete sequencing of the Arabidopsis genome to highlight a new view of the complete CAD gene family. Among nine AtCAD genes, we have identified the two distinct paralogs AtCAD-C and AtCAD-D, which share 75% identity and are likely to be involved in lignin biosynthesis in other plants. Northern, semiquantitative restriction fragment-length polymorphism-reverse transcriptase-polymerase chain reaction and western analysis revealed that AtCAD-C and AtCAD-D mRNA and protein ratios were organ dependent. Promoter activities of both genes are high in fibers and in xylem bundles. However, AtCAD-C displayed a larger range of sites of expression than AtCAD-D. Arabidopsis null mutants (Atcad-D and Atcad-C) corresponding to both genes were isolated. CAD activities were drastically reduced in both mutants, with a higher impact on sinapyl alcohol dehydrogenase activity (6% and 38% of residual sinapyl alcohol dehydrogenase activities for Atcad-D and Atcad-C, respectively). Only Atcad-D showed a slight reduction in Klason lignin content and displayed modifications of lignin structure with a significant reduced proportion of conventional S lignin units in both stems and roots, together with the incorporation of sinapaldehyde structures ether linked at Cβ. These results argue for a substantial role of AtCAD-D in lignification, and more specifically in the biosynthesis of sinapyl alcohol, the precursor of S lignin units. PMID:12805615

Contribution of genetic background, traditional risk factors, and HIV-related factors to coronary artery disease events in HIV-positive persons.

PubMed

Rotger, Margalida; Glass, Tracy R; Junier, Thomas; Lundgren, Jens; Neaton, James D; Poloni, Estella S; van 't Wout, Angélique B; Lubomirov, Rubin; Colombo, Sara; Martinez, Raquel; Rauch, Andri; Günthard, Huldrych F; Neuhaus, Jacqueline; Wentworth, Deborah; van Manen, Danielle; Gras, Luuk A; Schuitemaker, Hanneke; Albini, Laura; Torti, Carlo; Jacobson, Lisa P; Li, Xiuhong; Kingsley, Lawrence A; Carli, Federica; Guaraldi, Giovanni; Ford, Emily S; Sereti, Irini; Hadigan, Colleen; Martinez, Esteban; Arnedo, Mireia; Egaña-Gorroño, Lander; Gatell, Jose M; Law, Matthew; Bendall, Courtney; Petoumenos, Kathy; Rockstroh, Jürgen; Wasmuth, Jan-Christian; Kabamba, Kabeya; Delforge, Marc; De Wit, Stephane; Berger, Florian; Mauss, Stefan; de Paz Sierra, Mariana; Losso, Marcelo; Belloso, Waldo H; Leyes, Maria; Campins, Antoni; Mondi, Annalisa; De Luca, Andrea; Bernardino, Ignacio; Barriuso-Iglesias, Mónica; Torrecilla-Rodriguez, Ana; Gonzalez-Garcia, Juan; Arribas, José R; Fanti, Iuri; Gel, Silvia; Puig, Jordi; Negredo, Eugenia; Gutierrez, Mar; Domingo, Pere; Fischer, Julia; Fätkenheuer, Gerd; Alonso-Villaverde, Carlos; Macken, Alan; Woo, James; McGinty, Tara; Mallon, Patrick; Mangili, Alexandra; Skinner, Sally; Wanke, Christine A; Reiss, Peter; Weber, Rainer; Bucher, Heiner C; Fellay, Jacques; Telenti, Amalio; Tarr, Philip E

2013-07-01

Persons infected with human immunodeficiency virus (HIV) have increased rates of coronary artery disease (CAD). The relative contribution of genetic background, HIV-related factors, antiretroviral medications, and traditional risk factors to CAD has not been fully evaluated in the setting of HIV infection. In the general population, 23 common single-nucleotide polymorphisms (SNPs) were shown to be associated with CAD through genome-wide association analysis. Using the Metabochip, we genotyped 1875 HIV-positive, white individuals enrolled in 24 HIV observational studies, including 571 participants with a first CAD event during the 9-year study period and 1304 controls matched on sex and cohort. A genetic risk score built from 23 CAD-associated SNPs contributed significantly to CAD (P = 2.9 × 10(-4)). In the final multivariable model, participants with an unfavorable genetic background (top genetic score quartile) had a CAD odds ratio (OR) of 1.47 (95% confidence interval [CI], 1.05-2.04). This effect was similar to hypertension (OR = 1.36; 95% CI, 1.06-1.73), hypercholesterolemia (OR = 1.51; 95% CI, 1.16-1.96), diabetes (OR = 1.66; 95% CI, 1.10-2.49), ≥ 1 year lopinavir exposure (OR = 1.36; 95% CI, 1.06-1.73), and current abacavir treatment (OR = 1.56; 95% CI, 1.17-2.07). The effect of the genetic risk score was additive to the effect of nongenetic CAD risk factors, and did not change after adjustment for family history of CAD. In the setting of HIV infection, the effect of an unfavorable genetic background was similar to traditional CAD risk factors and certain adverse antiretroviral exposures. Genetic testing may provide prognostic information complementary to family history of CAD.

Detection of breast cancer with full-field digital mammography and computer-aided detection.

PubMed

The, Juliette S; Schilling, Kathy J; Hoffmeister, Jeffrey W; Friedmann, Euvondia; McGinnis, Ryan; Holcomb, Richard G

2009-02-01

The purpose of this study was to evaluate computer-aided detection (CAD) performance with full-field digital mammography (FFDM). CAD (Second Look, version 7.2) was used to evaluate 123 cases of breast cancer detected with FFDM (Senographe DS). Retrospectively, CAD sensitivity was assessed using breast density, mammographic presentation, histopathology results, and lesion size. To determine the case-based false-positive rate, patients with four standard views per case were included in the study group. Eighteen unilateral mammography examinations with nonstandard views were excluded, resulting in a sample of 105 bilateral cases. CAD detected 115 (94%) of 123 cancer cases: six of six (100%) in fatty breasts, 63 of 66 (95%) in breasts containing scattered fibroglandular densities, 43 of 46 (93%) in heterogeneously dense breasts, and three of five (60%) in extremely dense breasts. CAD detected 93% (41/44) of cancers manifesting as calcifications, 92% (57/62) as masses, and 100% (17/17) as mixed masses and calcifications. CAD detected 94% of the invasive ductal carcinomas (n = 63), 100% of the invasive lobular carcinomas (n = 7), 91% of the other invasive carcinomas (n = 11), and 93% of the ductal carcinomas in situ (n = 42). CAD sensitivity for cancers 1-10 mm (n = 55) was 89%; 11-20 mm (n = 37), 97%; 21-30 mm (n = 16), 100%; and larger than 30 mm (n = 15), 93%. The CAD false-positive rate was 2.3 marks per four-image case. CAD with FFDM showed a high sensitivity in identifying cancers manifesting as calcifications and masses. Sensitivity was maintained in cancers with lower mammographic sensitivity, including invasive lobular carcinomas and small neoplasms (1-20 mm). CAD with FFDM should be effective in assisting radiologists with earlier detection of breast cancer. Future studies are needed to assess CAD accuracy in larger populations.

Methylenetetrahydrofolate reductase gene, homocysteine and coronary artery disease: the A1298C polymorphism does matter. Inferences from a case study (Madeira, Portugal).

PubMed

Freitas, Ana I; Mendonça, Isabel; Guerra, Graça; Brión, Maria; Reis, Roberto P; Carracedo, Angel; Brehm, António

2008-01-01

Elevated levels of plasma homocysteine, an independent risk factor and a strong predictor of mortality in patients with coronary artery disease (CAD), can result from nutritional deficiencies or genetic errors, including methylenetetrahydrofolate reductase (MTHFR) C677T and A1298C polymorphisms. The contribution of these polymorphisms in the development of CAD remains controversial. We analysed the impact of MTHFR C677T and A1298C on fasting homocysteine and CAD in 298 CAD patients proved by angiography and 510 control subjects from the Island of Madeira (Portugal). After adjustment for other risk factors, plasma homocysteine remained independently correlated with CAD. Serum homocysteine was significantly higher in individuals with 677TT and 1298AA genotypes. There was no difference in the distribution of MTHFR677 genotypes between cases and controls but a significant increase in 1298AA prevalence was found in CAD patients. In spite of the clear effect of C677T mutation on elevated homocysteine levels we only found an association between 1298AA genotype and CAD in this population. The simultaneous presence of 677CT and 1298AA genotypes provides a significant risk of developing the disease, while the 1298AC genotype, combined with 677CC, shows a significant trend towards a decrease in CAD occurrence. The data shows an independent association between elevated levels of homocysteine and CAD. Both MTHFR polymorphisms are associated with increased fasting homocysteine (677TT and 1298AA genotypes), but only the 1298AA variant shows an increased prevalence in CAD group. Odds ratio seem to indicate that individuals with the MTHFR 1298AA genotype and the 677CT/1298AA compound genotype had a 1.6-fold increased risk for developing CAD suggesting a possible association of MTHFR polymorphisms with the risk of CAD in Madeira population.

Coronary artery disease in Saudi Arabia.

PubMed

Al-Nozha, Mansour M; Arafah, Mohammed R; Al-Mazrou, Yaqoub Y; Al-Maatouq, Mohammed A; Khan, Nazeer B; Khalil, Mohamed Z; Al-Khadra, Akram H; Al-Marzouki, Khalid; Abdullah, Moheeb A; Al-Harthi, Saad S; Al-Shahid, Maie S; Nouh, Mohammed S; Al-Mobeireek, Abdulellah

2004-09-01

Coronary artery disease (CAD) is a major public health problem worldwide. To our knowledge, there is no national data available from community based studies on prevalence of CAD in the Kingdom of Saudi Arabia (KSA). Therefore, we designed this study with the objective to determine the prevalence of CAD among Saudis of both sexes, between the ages of 30-70-years in rural as well as urban communities. Further, to determine the prevalence and clinical pattern of the major modifiable risk factors for CAD among the same population. This work is part of a major national study on CAD in Saudis Study (CADISS). This is a community based study conducted by examining subjects in the age group of 30-70-years of selected households during 5-year period between 1995 and 2000 in KSA. Data were obtained from history using a validated questionnaire, and electrocardiography. The data were analyzed to provide prevalence of CAD and risk assessment model. Nine hundred and forty-four subjects, out of 17232 were diagnosed to have CAD. Thus, the overall prevalence of CAD obtained from this study is 5.5% in KSA. The prevalence in males and females were 6.6% and 4.4% (P<0.0001). Urban Saudis have a higher prevalence of 6.2% compared to rural Saudis of 4% (P<0.0001). The following variables are found to be statistically significant risk factors in KSA: age, male gender, body mass index (BMI), hypertension, current smoking, fasting blood glucose, fasting cholesterol and triglycerides. The overall prevalence of CAD in KSA is 5.5%. A national prevention program at community level as well as high risk groups should be implemented sooner to prevent the expected epidemic of CAD that we are seeing, beginning. Measures are needed to change lifestyle and to address the management of the metabolic syndrome, to reduce modifiable risk factors for CAD. A longitudinal study is needed to demonstrate the importance of reducing modifiable risk factors for CAD in KSA.

A Comparison of the Marginal and Internal Fit of Cobalt- Chromium Copings Fabricated by Two Different CAD/CAM Systems (CAD/ Milling, CAD/ Ceramill Sintron)

PubMed Central

Vojdani, Mahroo; Torabi, Kianoosh; Atashkar, Berivan; Heidari, Hossein; Torabi Ardakani, Mahshid

2016-01-01

Statement of the Problem: Marginal fitness is the most important criteria for evaluation of the clinical acceptability of a cast restoration. Marginal gap which is due to cement solubility and plaque retention is potentially detrimental to both tooth and periodontal tissues. Purpose: This in vitro study aimed to evaluate the marginal and internal fit of cobalt- chromium (Co-Cr) copings fabricated by two different CAD/CAM systems: (CAD/ milling and CAD/ Ceramill Sintron). Materials and Method: We prepared one machined standard stainless steel master model with following dimensions: 7 mm height, 5mm diameter, 90˚ shoulder marginal finish line with 1 mm width, 10˚ convergence angle and anti-rotational surface on the buccal aspect of the die. There were 10 copings produced from hard presintered Co-Cr blocks according to CAD/ Milling technique and ten copings from soft non- presintered Co-Cr blocks according to CAD/ Ceramill Sintron technique. Marginal and internal accuracies of copings were documented by the replica technique. Replicas were examined at ten reference points under a digital microscope (230X). The Student's t-test was used for statistical analysis. p< 0.001 was considered significant. Results: Statistically significant differences existed between the groups (p< 0.001). The CAD/milling group (hard copings) had a mean marginal discrepancy (MD) of 104 µm, axial discrepancy (AD) of 23 µm and occlusal discrepancy of 130 µm. For CAD/ Ceramill Sintron group, these values were 195 µm (MD), 46 µm (AD), and 232 µm (OD). Internal total discrepancy (ITD) for the CAD/milling group was 77 µm, whereas for the CAD/Ceramill Sintron group was 143 µm. Conclusion: Hard presintered Co-Cr copings had significantly higher marginal and internal accuracies compared to the soft non-presintered copings. PMID:27942545

Implications of ACE (I/D) Gene Variants to the Genetic Susceptibility of Coronary Artery Disease in Asian Indians.

PubMed

Bhatti, G K; Bhatti, J S; Vijayvergiya, R; Singh, B

2017-06-01

Angiotensin-1-converting enzyme (ACE) gene has established substantial attention in the recent years as a candidate gene for hypertension, cardiovascular diseases and type 2 diabetes. The aim of the present study was to investigate the association of ACE (I/D) polymorphism with coronary artery disease (CAD) in a north Indian population. A total of 662 subjects (330 CAD patients and 332 healthy controls) were examined for association of ACE gene (I/D) polymorphism and environmental risk factors. The mean age of the CAD patients and control subjects was 60.53 ± 8.6 years and 56.55 ± 7.7 years, respectively ( p  = 0.000). Anthropometric and demographic data showed BMI values significantly higher among CAD patients and control subjects (26.98 ± 4.9 vs 24.04 ± 4.7, p  = 0.000). We observed pronounced central obesity in both CAD patients and controls, even at the lowest BMI values (<23 kg/m 2 ). Dyslipidemia was highly prevalent in CAD patients compared to control subjects. Genotypic data showed significantly higher frequency of DD genotype in CAD patients than that of control subjects (40 vs 28.3 %). No significant difference was observed in the distribution of ID genotypes between CAD patients and control subjects. Logistic regression analysis of data demonstrate that DD genotype was associated with 1.8 fold increased risk of development of CAD in Asian Indians (OR 1.8; 95 % CI 1.22-2.66; p  = 0.003). The frequency of D allele was significantly higher in CAD patients ( p  = 0.001). No significant difference was observed in the clinical and biochemical characteristics of CAD patients and controls when the data was stratified according to the genotypes of ACE gene. In conclusion, DD genotype of ACE gene may be associated with increased risk of CAD in Asian Indian population.

Myeloperoxidase mediated HDL oxidation and HDL proteome changes do not contribute to dysfunctional HDL in Chinese subjects with coronary artery disease

PubMed Central

Yu, Haiyi; Li, Lei; He, Liyun; Gao, Wei; Liu, Xiaodan; Guo, Yanhong; Byun, Jaeman; Zhang, Jifeng; Chen, Y. Eugene

2018-01-01

High density lipoprotein (HDL) cholesterol levels and cholesterol efflux capacity (CEC) are inversely correlated with coronary artery disease (CAD) risk. Myeloperoxidase (MPO) derived oxidants and HDL proteome changes are implicated in HDL dysfunction in subjects with CAD in the United States; however, the effect of MPO on HDL function and HDL proteome in ethnic Chinese population is unknown. We recruited four matched ethnic Chinese groups (20 patients each): subjects with 1) low HDL levels (HDL levels in men <40mg/dL and women <50mg/dL) and non-CAD (identified by coronary angiography or cardiac CT angiography); 2) low HDL and CAD; 3) high HDL (men >50mg/dL; women >60mg/dL) with no CAD; and 4) high HDL with CAD. Serum cytokines, serum MPO levels, serum CEC, MPO-oxidized HDL tyrosine moieties, and HDL proteome were assessed by mass spectrometry individually in the four groups. The cytokines, MPO levels, and HDL proteome profiles were not significantly different between the four groups. As expected, CEC was depressed in the entire CAD group but more specifically in the CAD low-HDL group. HDL of CAD subjects had significantly higher 3-nitrotyrosine than non-CAD subjects, but the MPO-specific 3-chlorotyrosine was unchanged; CEC in the CAD low-HDL group did not correlate with either HDL 3-chlorotyrosine or 3-nitrotyrosine levels. Neither 3-chlorotyrosine, which is MPO-specific, nor 3-nitrotyrosine generated from MPO or other reactive nitrogen species was associated with CEC. MPO mediated oxidative stress and HDL proteome composition changes are not the primary cause HDL dysfunction in Chinese subjects with CAD. These studies highlight ethnic differences in HDL dysfunction between United States and Chinese cohorts raising possibility of unique pathways of HDL dysfunction in this cohort. PMID:29505607

Ethnicity Modifies Associations between Cardiovascular Risk Factors and Disease Severity in Parallel Dutch and Singapore Coronary Cohorts

PubMed Central

Gijsberts, Crystel M.; Seneviratna, Aruni; de Carvalho, Leonardo P.; den Ruijter, Hester M.; Vidanapthirana, Puwalani; Sorokin, Vitaly; Stella, Pieter; Agostoni, Pierfrancesco; Asselbergs, Folkert W.; Richards, A. Mark; Low, Adrian F.; Lee, Chi-Hang; Tan, Huay Cheem; Hoefer, Imo E.; Pasterkamp, Gerard; de Kleijn, Dominique P. V.; Chan, Mark Y.

2015-01-01

Background In 2020 the largest number of patients with coronary artery disease (CAD) will be found in Asia. Published epidemiological and clinical reports are overwhelmingly derived from western (White) cohorts and data from Asia are scant. We compared CAD severity and all-cause mortality among 4 of the world’s most populous ethnicities: Whites, Chinese, Indians and Malays. Methods The UNIted CORoNary cohort (UNICORN) simultaneously enrolled parallel populations of consecutive patients undergoing coronary angiography or intervention for suspected CAD in the Netherlands and Singapore. Using multivariable ordinal regression, we investigated the independent association of ethnicity with CAD severity and interactions between risk factors and ethnicity on CAD severity. Also, we compared all-cause mortality among the ethnic groups using multivariable Cox regression analysis. Results We included 1,759 White, 685 Chinese, 201 Indian and 224 Malay patients undergoing coronary angiography. We found distinct inter-ethnic differences in cardiovascular risk factors. Furthermore, the associations of gender and diabetes with severity of CAD were significantly stronger in Chinese than Whites. Chinese (OR 1.3 [1.1–1.7], p = 0.008) and Malay (OR 1.9 [1.4–2.6], p<0.001) ethnicity were independently associated with more severe CAD as compared to White ethnicity. Strikingly, when stratified for diabetes status, we found a significant association of all three Asian ethnic groups as compared to White ethnicity with more severe CAD among diabetics, but not in non-diabetics. Crude all-cause mortality did not differ, but when adjusted for covariates mortality was higher in Malays than the other ethnic groups. Conclusion In this population of individuals undergoing coronary angiography, ethnicity is independently associated with the severity of CAD and modifies the strength of association between certain risk factors and CAD severity. Furthermore, mortality differs among ethnic groups. Our data provide insight in inter-ethnic differences in CAD risk factors, CAD severity and mortality. PMID:26147693

High frame rate imaging systems developed in Northwest Institute of Nuclear Technology

NASA Astrophysics Data System (ADS)

Li, Binkang; Wang, Kuilu; Guo, Mingan; Ruan, Linbo; Zhang, Haibing; Yang, Shaohua; Feng, Bing; Sun, Fengrong; Chen, Yanli

2007-01-01

This paper presents high frame rate imaging systems developed in Northwest Institute of Nuclear Technology in recent years. Three types of imaging systems are included. The first type of system utilizes EG&G RETICON Photodiode Array (PDA) RA100A as the image sensor, which can work at up to 1000 frame per second (fps). Besides working continuously, the PDA system is also designed to switch to capture flash light event working mode. A specific time sequence is designed to satisfy this request. The camera image data can be transmitted to remote area by coaxial or optic fiber cable and then be stored. The second type of imaging system utilizes PHOTOBIT Complementary Metal Oxygen Semiconductor (CMOS) PB-MV13 as the image sensor, which has a high resolution of 1280 (H) ×1024 (V) pixels per frame. The CMOS system can operate at up to 500fps in full frame and 4000fps partially. The prototype scheme of the system is presented. The third type of imaging systems adopts charge coupled device (CCD) as the imagers. MINTRON MTV-1881EX, DALSA CA-D1 and CA-D6 camera head are used in the systems development. The features comparison of the RA100A, PB-MV13, and CA-D6 based systems are given in the end.

The influence of contrast media on kidney function in patients with stable coronary artery disease.

PubMed

Reuter, Simon Bertram; Harutyunyan, Marina; Mygind, Naja Dam; Jørgensen, Erik; Kastrup, Jens

2014-08-01

To investigate the incidence of contrast media-induced nephropathy (CIN) in patients with stable coronary artery disease (CAD) referred for elective coronary intervention following hydration routines. The reversibility of CIN was followed in a 6 month-period. A total of 447 patients referred for elective coronary intervention due to suspected CAD were included. Blood samples were collected before and 24 h after intervention and medical records were obtained. Patients had no drinking fluid restrictions and were routinely treated with a 1000 ml saline infusion. All patients were invited to a 6-month examination and collection of blood samples. A total of 19 patients (4.3%) developed CIN. CIN patients had a pre-investigation higher estimated glomerular filtration rate (eGRF), lower level of kidney failure and lower creatinine level than non-CIN patients. Kidney function was not normalized in CIN patients 6 months after the intervention. Two patients still met the definition of CIN. With no restriction in fluid intake and supplementary infusion of saline, only a few patients with stable CAD developed early indications of CIN during elective coronary interventions. Kidney function and the amount of contrast media used was not a predictor of CIN development. The induced CIN was not completely normalized in a 6-month follow-up period.

Prognostic and therapeutic implications of statin and aspirin therapy in individuals with nonobstructive coronary artery disease: results from the CONFIRM (COronary CT Angiography EvaluatioN For Clinical Outcomes: An InteRnational Multicenter registry) registry.

PubMed

Chow, Benjamin J W; Small, Gary; Yam, Yeung; Chen, Li; McPherson, Ruth; Achenbach, Stephan; Al-Mallah, Mouaz; Berman, Daniel S; Budoff, Matthew J; Cademartiri, Filippo; Callister, Tracy Q; Chang, Hyuk-Jae; Cheng, Victor Y; Chinnaiyan, Kavitha; Cury, Ricardo; Delago, Augustin; Dunning, Allison; Feuchtner, Gundrun; Hadamitzky, Martin; Hausleiter, Jörg; Karlsberg, Ronald P; Kaufmann, Philipp A; Kim, Yong-Jin; Leipsic, Jonathon; LaBounty, Troy; Lin, Fay; Maffei, Erica; Raff, Gilbert L; Shaw, Leslee J; Villines, Todd C; Min, James K

2015-04-01

We sought to examine the risk of mortality associated with nonobstructive coronary artery disease (CAD) and to determine the impact of baseline statin and aspirin use on mortality. Coronary computed tomographic angiography permits direct visualization of nonobstructive CAD. To date, the prognostic implications of nonobstructive CAD and the potential benefit of directing therapy based on nonobstructive CAD have not been carefully examined. A total of 27 125 consecutive patients who underwent computed tomographic angiography (12 enrolling centers and 6 countries) were prospectively entered into the COronary CT Angiography EvaluatioN For Clinical Outcomes: An InteRnational Multicenter (CONFIRM) registry. Patients, without history of previous CAD or obstructive CAD, for whom baseline statin and aspirin use was available were analyzed. Each coronary segment was classified as normal or nonobstructive CAD (1%-49% stenosis). Patients were followed up for a median of 27.2 months for all-cause mortality. The study comprised 10 418 patients (5712 normal and 4706 with nonobstructive CAD). In multivariable analyses, patients with nonobstructive CAD had a 6% (95% confidence interval, 1%-12%) higher risk of mortality for each additional segment with nonobstructive plaque (P=0.021). Baseline statin use was associated with a reduced risk of mortality (hazard ratio, 0.44; 95% confidence interval, 0.28-0.68; P=0.0003), a benefit that was present for individuals with nonobstructive CAD (hazard ratio, 0.32; 95% confidence interval, 0.19-0.55; P<0.001) but not for those without plaque (hazard ratio, 0.66; 95% confidence interval, 0.30-1.43; P=0.287). When stratified by National Cholesterol Education Program/Adult Treatment Program III, no mortality benefit was observed in individuals without plaque. Aspirin use was not associated with mortality benefit, irrespective of the status of plaque. The presence and extent of nonobstructive CAD predicted mortality. Baseline statin therapy was associated with a significant reduction in mortality for individuals with nonobstructive CAD but not for individuals without CAD. URL: http://clinicaltrials.gov/. Unique identifier NCT01443637. © 2015 American Heart Association, Inc.