Baltimore, MD

NASA Technical Reports Server (NTRS)

2001-01-01

Baltimore is the largest city in Maryland and one of the busiest ports in the United States. Its economy focuses on research and development, especially in the areas of aquaculture, pharmaceuticals, and medical supplies and services. Before European settlement, the site of Baltimore was inhabited by Native Americans of the Susquehannock tribe. The town was founded in 1729 and named for the barons Baltimore, the British founders of the Maryland Colony. This ASTER image of Baltimore was acquired on April 4, 2000, covers an area of 17 by 20 km, and is located at 39.3 degrees north latitude and 76.7 degrees west longitude.

The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

78 FR 24803 - Hilco SP Rail, LLC-Acquisition and Operation Exemption-RG Steel Railroad Holding, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... Point, Baltimore County, Md. (the Line). Hilco states that the operator of the Line will be MCM Rail Services LLC (MCM),\\1\\ and that MCM will interchange traffic with CSX Transportation, Inc. (CSXT), and... commitments in the agreement between MCM and Hilco, and that there will be no interchange agreements in the...

Railway Tunnel Clearance Inspection Method Based on 3D Point Cloud from Mobile Laser Scanning

PubMed Central

Zhou, Yuhui; Wang, Shaohua; Mei, Xi; Yin, Wangling; Lin, Chunfeng; Mao, Qingzhou

2017-01-01

Railway tunnel clearance is directly related to the safe operation of trains and upgrading of freight capacity. As more and more railway are put into operation and the operation is continuously becoming faster, the railway tunnel clearance inspection should be more precise and efficient. In view of the problems existing in traditional tunnel clearance inspection methods, such as low density, slow speed and a lot of manual operations, this paper proposes a tunnel clearance inspection approach based on 3D point clouds obtained by a mobile laser scanning system (MLS). First, a dynamic coordinate system for railway tunnel clearance inspection has been proposed. A rail line extraction algorithm based on 3D linear fitting is implemented from the segmented point cloud to establish a dynamic clearance coordinate system. Second, a method to seamlessly connect all rail segments based on the railway clearance restrictions, and a seamless rail alignment is formed sequentially from the middle tunnel section to both ends. Finally, based on the rail alignment and the track clearance coordinate system, different types of clearance frames are introduced for intrusion operation with the tunnel section to realize the tunnel clearance inspection. By taking the Shuanghekou Tunnel of the Chengdu–Kunming Railway as an example, when the clearance inspection is carried out by the method mentioned herein, its precision can reach 0.03 m, and difference types of clearances can be effectively calculated. This method has a wide application prospects. PMID:28880232

Static stall alleviation using a rail plasma actuator

NASA Astrophysics Data System (ADS)

Choi, Young-Joon; Gray, Miles; Sirohi, Jayant; Raja, Laxminarayan L.

2018-07-01

An experimental study was conducted to investigate the ability of a rail plasma actuator (RailPAc) to alleviate static stall on an airfoil. The RailPAc device consists of parallel rails flush mounted on the upper surface of a VR-12 airfoil, with a high-current (∼1.3 kA) arc bridging the gap between the rails. A Lorentz force (∼0.3 N lasting  ∼1 ms) generated on the arc propels it along the airfoil chord and transfers momentum to the surrounding flow. Experiments were conducted in a low speed wind tunnel at two different Reynolds numbers ( and ) and various static angles of attack (up to  ∼30°). Particle image velocimetry (PIV) was used to measure the flow over the passive and actuated airfoil, while the airfoil lift was measured using a force balance. The experiments showed that the RailPAc promotes flow reattachment and can suppress static stall over a wide range of angles of attack. Operation of a single RailPAc resulted in  ∼40 improvement in post-stall lift and  ∼4° increase in stall angle compared to a passive airfoil with an unpowered RailPAc. The results provide insight into the actuation mechanism and demonstrate, for the first time, the ability of the RailPAc to alleviate static stall on an airfoil.

Field Evaluation of Advanced Methods of Geotechnical Instrumentation for Transit Tunneling

DOT National Transportation Integrated Search

1983-09-01

The construction of new rail rapid transit systems and additions to existing systems, has greatly increased the amount of tunneling performed in the United States. Since these transit systems are generally located in urban areas, tunneling is used to...

Baltimore applications project

NASA Technical Reports Server (NTRS)

Golden, T. S.; Yaffee, P.

1978-01-01

The Baltimore Applications Project (BAP) was originally designed as an experimental effort to assist the government of the City of Baltimore in applying technology to the solution of municipal problems. Recent modifications in the structuring and operation of the program are discussed. A tabular update on the individual tasks undertaken and their treatment is provided. Details of energy and nonenergy related tasks are presented in appendices.

Fuel Savings and Aerodynamic Drag Reduction from Rail Car Covers

NASA Technical Reports Server (NTRS)

Storms, Bruce; Salari, Kambiz; Babb, Alex

2008-01-01

The potential for energy savings by reducing the aerodynamic drag of rail cars is significant. A previous study of aerodynamic drag of coal cars suggests that a 25% reduction in drag of empty cars would correspond to a 5% fuel savings for a round trip [1]. Rail statistics for the United States [2] report that approximately 5.7 billion liters of diesel fuel were consumed for coal transportation in 2002, so a 5% fuel savings would total 284 million liters. This corresponds to 2% of Class I railroad fuel consumption nationwide. As part of a DOE-sponsored study, the aerodynamic drag of scale rail cars was measured in a wind tunnel. The goal of the study was to measure the drag reduction of various rail-car cover designs. The cover designs tested yielded an average drag reduction of 43% relative to empty cars corresponding to an estimated round-trip fuel savings of 9%.

Alleviation of pressure pulse effects for trains entering tunnels. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Dayman, B., Jr.; Hammitt, A. G.; Holway, H. P.; Tucker, C. E., Jr.; Vardy, A. E.

1979-01-01

The degree to which it is possible to attenuate the effects of pressure pulses on the passengers in trains entering tunnels by modifying the normally abrupt portal of a constant-diameter single track tunnel was investigated. Although the suggested modifications to the tunnel entrance portal may not appreciably decrease the magnitude of the pressure rise, they are very effective in reducing the discomfort to the human ear by substantially decreasing the rate of pressure rise to that which the normal ear can accommodate. Qualitative comparison was made of this portal modification approach with other approaches: decreasing the train speed or sealing the cars. The optimum approach, which is dependent upon the conditions and requirements of each particular rail system, is likely to be the portal modification one for a rapid rail mass transit system.

Evacuation simulation using Hybrid Space Discretisation and Application to Large Underground Rail Tunnel Station

NASA Astrophysics Data System (ADS)

Chooramun, N.; Lawrence, P. J.; Galea, E. R.

2017-08-01

In all evacuation simulation tools, the space through which agents navigate and interact is represented by one the following methods, namely Coarse regions, Fine nodes and Continuous regions. Each of the spatial representation methods has its benefits and limitations. For instance, the Coarse approach allows simulations to be processed very rapidly, but is unable to represent the interactions of the agents from an individual perspective; the Continuous approach provides a detailed representation of agent movement and interaction but suffers from relatively poor computational performance. The Fine nodal approach presents a compromise between the Continuous and Coarse approaches such that it allows agent interaction to be modelled while providing good computational performance. Our approach for representing space in an evacuation simulation tool differs such that it allows evacuation simulations to be run using a combination of Coarse regions, Fine nodes and Continuous regions. This approach, which we call Hybrid Spatial Discretisation (HSD), is implemented within the buildingEXODUS evacuation simulation software. The HSD incorporates the benefits of each of the spatial representation methods whilst providing an optimal environment for representing agent movement and interaction. In this work, we demonstrate the effectiveness of the HSD through its application to a moderately large case comprising of an underground rail tunnel station with a population of 2,000 agents.

77 FR 17121 - RailAmerica, Inc., Palm Beach Rail Holding, Inc., RailAmerica Transportation Corp., RailTex, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... Group, LLC, and RR Acquisition Holding, LLC--Control Exemption--Wellsboro & Corning Railroad, LLC Rail.... (RTC), RailTex, Inc. (RailTex), Fortress Investment Group, LLC (Fortress), and RR Acquisition Holding... acquire indirect control of the Wellsboro & Corning Railroad, LLC (W&C), a Class III rail carrier, through...

Evaluation of rock classifications at B. C. Rail tumbler ridge tunnels

NASA Astrophysics Data System (ADS)

Kaiser, Peter K.; Mackay, C.; Gale, A. D.

1986-10-01

Construction of four single track railway tunnels through sedimentary rocks in central British Columbia, Canada, provided an excellent opportunity to compare various rock mass classification systems and to evaluate their applicability to the local geology. The tunnels were excavated by conventional drilling and blasting techniques and supported primarily with rock bolts and shotcrete, and with steel sets in some sections. After a brief project description including tunnel construction techniques, local geology and groundwater conditions, the data collection and filed mapping procedure is reviewed. Four rock mass classification systems ( RQD, RSR, RMR, Q) for empirical tunnel design are reviewed and relevant factors for the data interpretation are discussed. In comparing and evaluating the performance of these classification systems three aspects received special attention. The tunnel support predicted by the various systems was compared to the support installed, a unique correlation between the two most useful and most frequently applied classifications, the RMR and Q systems, was established and assessed, and finally, the non-support limit and size effect were evaluated. It is concluded that the Q-system best predicted the required tunnel support and that the RMR was only adequate after adjustment for the influence of opening size. Correction equations for opening size effects are presented for the RMR system. The RSR and RQD systems are not recommended for empirical tunnel design.

Resonant tunneling of 1-dimensional electrons across an array of 3-dimensionally confined potential wells

NASA Astrophysics Data System (ADS)

Allee, D. R.; Chou, S. Y.; Harris, J. S.; Pease, R. F. W.

A lateral resonant tunneling field effect transistor has been fabricated with a gate electrode in the form of a railway such that the two rails form a lateral double barrier potential at the GaAs/AlGaAs interface. The ties confine the electrons in the third dimension forming an array of potential boxes or three dimensionally confined potential wells. The width of the ties and rails is 50nm; the spacings between the ties and between the two rails are 230nm and 150nm respectively. The ties are 750nm long and extend beyond the the two rails forming one dimensional wires on either side. Conductance oscillations are observed in the drain current at 4.2K as the gate voltage is scanned. Comparison with devices with a solid gate, and with a monorail gate with ties fabricated on the same wafer suggest that these conductance oscillations are electron resonant tunneling from one dimensional wires through the quasi-bound states of the three dimensionally confined potential wells. Comparison with a device with a two rail gate without ties (previously published) indicates that additional confinement due to the ties enhances the strength of the conductance oscillations.

Baltimore City Faith-Based Prostate Cancer Prevention and Control Coalition

DTIC Science & Technology

2007-02-01

University of Maryland Baltimore School of Medicine Baltimore MD 21201- 1082 REPORT DATE: February 2007 TYPE OF REPORT...Maryland Baltimore School of Medicine Baltimore MD 21201- 1082 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR

Changing Lives: The Baltimore City Community College Life Sciences Partnership with the University of Maryland, Baltimore

ERIC Educational Resources Information Center

Carroll, Vanessa G.; Harris-Bondima, Michelle; Norris, Kathleen Kennedy; Williams, Carolane

2010-01-01

Baltimore City Community College (BCCC) leveraged heightened student interest and enrollment in the sciences and allied health with Maryland's world-leading biotechnology industry to build a community college life sciences learning and research center right on the University of Maryland, Baltimore's downtown BioPark campus. The BCCC Life Sciences…

Teaching Baltimore Together: Building Thematic Cooperation between Classes

ERIC Educational Resources Information Center

Collins, Samuel Gerald; Durington, Matthew; Fabricant, Nicole

2017-01-01

One year ago, Baltimore citizens took to the streets to protest not only the death of Freddie Grey, but the structural inequalities and structural violence that systematically limit the opportunities for working-class African Americans in Baltimore. The protests, though, were not just confined to Baltimore City. Borne on sophisticated…

A First Look at Community Schools in Baltimore

ERIC Educational Resources Information Center

Olson, Linda S.

2014-01-01

In partnership with the Mayor of Baltimore City and Baltimore City Public Schools (City Schools), Family League of Baltimore (Family League) launched the Community & School Engagement Strategy in school year 2012-13. As part of that process, it intentionally aligned its existing Out of School Time (OST) activities with community schools…

Baltimore City Faith-Based Prostate Cancer Prevention and Control Coalition

DTIC Science & Technology

2005-02-01

Plowden, Ph.D. CONTRACTING ORGANIZATION: University of Maryland, Baltimore Baltimore, Maryland 21201- 1082 REPORT DATE: February 2005 TYPE OF REPORT...NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION University of Maryland, Baltimore REPORT NUMBER Baltimore, Maryland 21201- 1082 E-Mail: Plowden@son

Baltimore City Schools College Fact Book

ERIC Educational Resources Information Center

Durham, Rachel E.; Ruiz, Rudy; Connolly, Faith

2017-01-01

This Fact Book follows a series of reports completed by the Baltimore Education Research Consortium (BERC) between 2011 and 2015, that examined Baltimore City graduates' enrollment in college and later degree completion (Durham, Stein, & Connolly, 2015; Durham & Olson, 2013; Durham & Westlund, 2011), as well as indicators of college…

The Black Student's Guide to Baltimore.

ERIC Educational Resources Information Center

Baltimore Community Coll., MD.

Designed for black students attending the Community College of Baltimore (CCB), this booklet provides a guide to services, organizations, and entertainment in the Baltimore area affiliated with blacks or of particular interest to the black community. The first section offers an introduction to CCB, including information on student associations,…

ETR, TRA642. NORTHSOUTH SECTION, LOOKING WEST. STEELFRAME ROOF, CRANE RAIL, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR, TRA-642. NORTH-SOUTH SECTION, LOOKING WEST. STEEL-FRAME ROOF, CRANE RAIL, AND CRANES. COOLANT PIPE TUNNEL LEADING TO REACTOR FROM EAST. (THIS WAS A PRELIMINARY CONCEPT DRAWING.) KAISER ETR-5528-MTR-642-A-4, 11/1955. INL INDEX NO. 532-0642-00-486-100912, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Baltimore School District on Upward Swing

ERIC Educational Resources Information Center

Maxwell, Lesli A.

2009-01-01

Two years ago, only 150 students attended Holabird Elementary, then a K-5 school in the southeastern corner of this city. Competition from charters and from regular public schools in nearby Baltimore County had drained families from Holabird, a chronic underperformer. So when Andres A. Alonso, the chief executive officer of the Baltimore city…

Baltimore-Washington Parkway, Maryland : traffic safety plan

DOT National Transportation Integrated Search

2015-06-01

Over the past decade, a number of studies have documented the traffic safety issues on the National Park Services (NPS) portion of the Baltimore-Washington (B-W) Parkway. The Baltimore-Washington Parkway Traffic Safety Plan provides an action plan...

General view looking SE at corridor and Pennsylvania Station. Baltimore, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view looking SE at corridor and Pennsylvania Station. Baltimore, Baltimore City, MD. Sec. 1201, MP 93.23. - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

77 FR 12107 - RailAmerica, Inc., Palm Beach Holding, Inc., RailAmerica Transportation Corp., RailTex, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

...., Palm Beach Holding, Inc., RailAmerica Transportation Corp., RailTex, Inc., Fortress Investment Group, LLC, and RR Acquisition Holding, LLC--Control Exemption--Marquette Rail, LLC AGENCY: Surface...), RailTex, Inc., Fortress Investment Group, LLC (Fortress), and RR Acquisition Holding, LLC (RR...

Achieving a Healthy Zoning Policy in Baltimore: Results of a Health Impact Assessment of the TransForm Baltimore Zoning Code Rewrite

PubMed Central

Greiner, Amelia; Fichtenberg, Caroline M.; Feingold, Beth J.; Ellen, Jonathan M.; Jennings, Jacky M.

2013-01-01

Objectives The social determinants of health (SDH) include factors apart from genes and biology that affect population health. Zoning is an urban planning tool that influences neighborhood built environments. We describe the methods and results of a health impact assessment (HIA) of a rezoning effort in Baltimore, Maryland, called TransForm Baltimore. We highlight findings specific to physical activity, violent crime, and obesity. Methods We conducted a multistage HIA of TransForm Baltimore using HIA practice guidelines. Key informant interviews identified focus areas for the quantitative assessment. A literature review and a zoning code analysis evaluated potential impacts on neighborhood factors including physical activity, violent crime, and obesity. We estimated potential impacts in high- and low-poverty neighborhoods. The findings resulted in recommendations to improve the health-promoting potential of TransForm Baltimore. Results Mixed-use and transit-oriented development were key goals of TransForm Baltimore. Health impacts identified by stakeholders included walkability and healthy communities. For Baltimore residents, we estimated that (1) the percentage of people living in districts allowing mixed-use and off-premise alcohol outlets would nearly triple, (2) 18% would live in transit-oriented development zones, and (3) all residents would live in districts with new lighting and landscaping guidelines. Limiting the concentration of off-premise alcohol outlets represented an opportunity to address health promotion. Conclusions Changes to Baltimore's zoning code could improve population health including decreasing violent crime. HIAs are an important platform for applying SDH to public health practice. This HIA specifically linked municipal zoning policy with promoting healthier neighborhoods. PMID:24179284

The Rail Alignment Environmental Impact Statement: An Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Sweeney

2005-01-20

On July 23,2002, the President of the United States signed into law a joint resolution of the United States Congress designating the Yucca Mountain site in Nye County, Nevada, for development as a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste. If the US. Nuclear Regulatory Commission authorizes construction of the repository and receipt and possession of spent nuclear fuel and high-level radioactive at Yucca Mountain, the U.S. Department of Energy (DOE) would be responsible for transporting these materials to the Yucca Mountain repository as part of its obligation under the Nuclear Waste Policy Act.more » Part of the site recommendation decision included the analysis of a nation-wide shipping campaign to the proposed repository site. The ''Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada'' (February 2002) (Repository EIS) evaluated the potential impacts of the transportation of 70,000 Metric Tons of Heavy Metal spent nuclear fuel and high-level radioactive waste from 77 locations around the nation to the potential repository in Nevada over a 24 year shipping campaign. In the Repository EIS, DOE identified mostly rail as its preferred mode of transportation, both nationally and in the State of Nevada. In December 2003, based on public comments and the environmental analyses in the Repository EIS, DOE identified a preference for the Caliente rail corridor in Nevada. On April 8, 2004, DOE issued a Record of Decision (ROD) on the Mode of Transportation and Nevada Rail Corridor for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada. In this ROD, the DOE announced that it had decided to select the mostly rail scenario analyzed in the Repository EIS as the transportation mode both on a national basis and in the State of Nevada. Under the mostly rail

A 2.5D finite element and boundary element model for the ground vibration from trains in tunnels and validation using measurement data

NASA Astrophysics Data System (ADS)

Jin, Qiyun; Thompson, David J.; Lurcock, Daniel E. J.; Toward, Martin G. R.; Ntotsios, Evangelos

2018-05-01

A numerical model is presented for the ground-borne vibration produced by trains running in tunnels. The model makes use of the assumption that the geometry and material properties are invariant in the axial direction. It is based on the so-called two-and-a-half dimensional (2.5D) coupled Finite Element and Boundary Element methodology, in which a two-dimensional cross-section is discretised into finite elements and boundary elements and the third dimension is represented by a Fourier transform over wavenumbers. The model is applied to a particular case of a metro line built with a cast-iron tunnel lining. An equivalent continuous model of the tunnel is developed to allow it to be readily implemented in the 2.5D framework. The tunnel structure and the track are modelled using solid and beam finite elements while the ground is modelled using boundary elements. The 2.5D track-tunnel-ground model is coupled with a train consisting of several vehicles, which are represented by multi-body models. The response caused by the passage of a train is calculated as the sum of the dynamic component, excited by the combined rail and wheel roughness, and the quasi-static component, induced by the constant moving axle loads. Field measurements have been carried out to provide experimental validation of the model. These include measurements of the vibration of the rail, the tunnel invert and the tunnel wall. In addition, simultaneous measurements were made on the ground surface above the tunnel. Rail roughness and track characterisation measurements were also made. The prediction results are compared with measured vibration obtained during train passages, with good agreement.

The Path to Baltimore's "Best Prospect" Jobs without a College Degree: Career Credentialing Programs at Baltimore's Community Colleges. The Abell Report. Volume 28, No. 2

ERIC Educational Resources Information Center

Hopkins, Barbara L.

2015-01-01

Only one in five graduates of Baltimore City Public Schools matriculates to a four-year college; the vast majority enroll in community college or look for a full-time job. Baltimore graduates and job-seekers need postsecondary training that works. "The Path to Baltimore's 'Best Prospect' Jobs without a College Degree: Career Credentialing…

Evaluation of the train signal and rail systems for the Anton Anderson Memorial Tunnel.

DOT National Transportation Integrated Search

2014-07-01

The Whittier Access Project was completed in 2000. One phase of the project was to convert the 2.5 mile long Anton Anderson : Memorial Tunnel (Whittier Tunnel) into the worlds only dual-use highway/railroad tunnel with one way reversible highway t...

Estimation of rail wear limits based on rail strength investigations

DOT National Transportation Integrated Search

1998-12-01

This report describes analyses performed to estimate limits on rail wear based on strength investigations. Two different failure modes are considered in this report: (1) permanent plastic bending, and (2) rail fracture. Rail bending stresses are calc...

Indiana rail plan

DOT National Transportation Integrated Search

2009-07-08

The 2009 Indiana Rail Plan was developed as part of the Indiana Multimodal Freight and Mobility Plan to direct the State of Indianas future freight and passenger rail policy, provide a framework to guide future decisions regarding rail system inve...

Impact of the rail-pad multi-discrete model upon the prediction of the rail response

NASA Astrophysics Data System (ADS)

Mazilu, T.; Leu, M.

2017-08-01

Wheel/rail vibration has many technical effects such as wear of the rolling surfaces, rolling noise, settlement of the ballast and subgrade etc. This vibration is depending on the rail pad characteristic and subsequently, it is important to have an accurate overview on the relation between the rail pad characteristic and the level of the wheel/rail vibration. To this end, much theoretical and experimental research has been developed in the past, and for the theoretical approach the track model, in general, and, particularly, the rail pad model is of crucial importance. Usually, the rail pad model is discrete model one, neglecting the length of the rail pad. This fact is questionable because the sleepers span is only 4 times the rail pad length. Using the rail pad discrete model, the rail response is overestimated when the frequency of the excitation equals the pinned-pinned resonance frequency. In this paper, a multi-discrete model for the rail pad, consisting in many Kelvin-Voigt parallel systems, is inserted into an analytical model of the track. The track model is reduced to a rail taken as infinite Timoshenko beam, discretely supported via rail pad, sleeper and ballast. The influence of the number of Kelvin-Voigt systems of the rail pad model on the rail response is analysed.

46 CFR 28.410 - Deck rails, lifelines, storm rails, and hand grabs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Deck rails, lifelines, storm rails, and hand grabs. 28..., lifelines, storm rails, and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section... with a bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab...

46 CFR 28.410 - Deck rails, lifelines, storm rails, and hand grabs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Deck rails, lifelines, storm rails, and hand grabs. 28..., lifelines, storm rails, and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section... with a bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab...

46 CFR 28.810 - Deck rails, lifelines, storm rails and hand grabs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Deck rails, lifelines, storm rails and hand grabs. 28..., storm rails and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section, deck... bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab must be...

46 CFR 28.810 - Deck rails, lifelines, storm rails and hand grabs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Deck rails, lifelines, storm rails and hand grabs. 28..., storm rails and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section, deck... bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab must be...

46 CFR 28.810 - Deck rails, lifelines, storm rails and hand grabs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Deck rails, lifelines, storm rails and hand grabs. 28..., storm rails and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section, deck... bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab must be...

46 CFR 28.410 - Deck rails, lifelines, storm rails, and hand grabs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Deck rails, lifelines, storm rails, and hand grabs. 28..., lifelines, storm rails, and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section... with a bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab...

46 CFR 28.410 - Deck rails, lifelines, storm rails, and hand grabs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Deck rails, lifelines, storm rails, and hand grabs. 28..., lifelines, storm rails, and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section... with a bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab...

46 CFR 28.410 - Deck rails, lifelines, storm rails, and hand grabs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Deck rails, lifelines, storm rails, and hand grabs. 28..., lifelines, storm rails, and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section... with a bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab...

46 CFR 28.810 - Deck rails, lifelines, storm rails and hand grabs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Deck rails, lifelines, storm rails and hand grabs. 28..., storm rails and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section, deck... bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab must be...

46 CFR 28.810 - Deck rails, lifelines, storm rails and hand grabs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Deck rails, lifelines, storm rails and hand grabs. 28..., storm rails and hand grabs. (a) Except as otherwise provided in paragraph (d) of this section, deck... bulwark, chain link fencing, wire mesh, or an equivalent. (f) A suitable storm rail or hand grab must be...

77 FR 28244 - Amendment of Class D and E Airspace; Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... Baltimore VORTAC are being adjusted to coincide with the FAA's aeronautical database, which show the correct... Baltimore VORTAC, Baltimore, MD, to be in concert with the FAAs aeronautical database, which shows the... with the FAA's Aeronautical Products database. The FAA has determined that this regulation only...

Aerodynamic Improvements to Cargo Carrying Rail Cars due to Roof Modifications

NASA Astrophysics Data System (ADS)

Condie, Robert; Maynes, Daniel

2012-11-01

The aerodynamic drag associated with the transport of commodities by rail is becoming increasingly important as the cost of diesel fuel increases. We provide an assessment of the influence of the roof structure on aerodynamic performance of two dissimilar rail cars, namely automobile carrying cars and coal carrying cars. Currently, the roof material for automobile carrying rail cars is corrugated steel, with the corrugation aligned perpendicular to the direction of travel. Coal cars are currently left uncovered for loading convenience and on the return leg from the power plant are empty. Aerodynamic drag data have been obtained through wind tunnel testing on 1/29 scale models to understand the savings that may be realized by judicious modification to the tops of both these car types. For the automobile-carrying cars, testing is performed for the corrugated and smooth roof configurations. This modification alone has the potential of reducing the car drag coefficient by nominally 25%. A broader study is performed for the coal cars, with data being acquired for coal filled models, empty models, and several cover prototype configurations. The results reveal that implementation of a cover may yield reductions in the aerodynamic drag for both coal filled (nominally 7%) and empty coal cars (nominally 30%).

Rocking the Baltimore Boat.

ERIC Educational Resources Information Center

Harrington-Lueker, Donna

1994-01-01

Intelligent, abrasive, and combative, Baltimore County School Superintendent Stuart Berger is committed to fighting hard for change. Charged with implementing the district's ambitious educational objectives, Berger has pushed for all-day kindergartens, school breakfast programs, an office of family services, improved middle school programs, and a…

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization.

PubMed

Park, Duckshin; Lee, Taejeong; Hwang, Doyeon; Jung, Wonseok; Lee, Yongil; Cho, KiChul; Kim, Dongsool; Lees, Kiyoung

2014-12-01

The level of particulate matter of less than 10 μm diameter (PM10) at subway platforms can be significantly reduced by installing a platform screen-door system. However, both workers and passengers might be exposed to higher PM10 levels while the cars are within the tunnel because it is a more confined environment. This study determined the PM10 levels in a subway tunnel, and identified the sources of PM10 using elemental analysis and receptor modeling. Forty-four PM10 samples were collected in the tunnel between the Gireum and Mia stations on Line 4 in metropolitan Seoul and analyzed using inductively coupled plasma-atomic emission spectrometry and ion chromatography. The major PM10 sources were identified using positive matrix factorization (PMF). The average PM10 concentration in the tunnels was 200.8 ± 22.0 μg/m3. Elemental analysis indicated that the PM10 consisted of 40.4% inorganic species, 9.1% anions, 4.9% cations, and 45.6% other materials. Iron was the most abundant element, with an average concentration of 72.5 ± 10.4 μg/m3. The PM10 sources characterized by PMF included rail, wheel, and brake wear (59.6%), soil combustion (17.0%), secondary aerosols (10.0%), electric cable wear (8.1%), and soil and road dust (5.4%). Internal sources comprising rail, wheel, brake, and electric cable wear made the greatest contribution to the PM10 (67.7%) in tunnel air. Implications: With installation of a platform screen door, PM10 levels in subway tunnels were higher than those on platforms. Tunnel PM10 levels exceeded 150 µg/m3 of the Korean standard for subway platform. Elemental analysis of PM10 in a tunnel showed that Fe was the most abundant element. Five PM10 sources in tunnel were identified by positive matrix factorization. Railroad-related sources contributed 68% of PM10 in the subway tunnel.

Rail damage in a solid-armature rail gun. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brassard, T.; Homan, C.G.

1987-12-01

Plasma-arc-drive rail guns operate by forming a high-temperature plasma behind the projectile using a thin metal fuze. These systems achieve the highest projectile velocities (about 12 km /sec), since the driving force includes a substantial plasma pressure as well as the electromagnetic or Lorentz force. Unfortunately, severe rail damage occurs primarily from the intense temperatures generated by the plasma arc and the wiping motion of the armature itself. The solid-armature gun replaces the plasma armature with a conducting metal armature. Since the plasma arcing is reduced or eliminated, the projectiles are accelerated mainly by the Lorentz force. Thus, solid armaturemore » rail guns operate at lower projectile velocities. The important tradeoff is that there is a substantial reduction in rail damage for metal armature projectiles. The elimination of the plasma force limits projectile velocities in the metal-armature rail guns. A more-subtle limit is the speed at which the commutation process can take place. Although the latter limit is still not well understood, experimental evidence indicates a commutation limit may occur near 6 to 7 km/sec. This velocity limit is still attractive for Army tactical missions for rail guns. The actual rail damage occurring with two types of metal armatures, wire brush contactors and monolithic metal contactors, and new developments in barrel technology, such as superconducting augmentation, are presented in this report.« less

Review of Rail Behavior Under Wheel/Rail Impact Loading

DOT National Transportation Integrated Search

1986-04-01

The report discusses several studies involving factors that significantly affect rail life, particularly wheel impact loads. Parameters that characterize the effect of wheel impact loads on rail behavior are examined in terms of system variables such...

Modern Methods of Rail Welding

NASA Astrophysics Data System (ADS)

Kozyrev, Nikolay A.; Kozyreva, Olga A.; Usoltsev, Aleksander A.; Kryukov, Roman E.; Shevchenko, Roman A.

2017-10-01

Existing methods of rail welding, which are enable to get continuous welded rail track, are observed in this article. Analysis of existing welding methods allows considering an issue of continuous rail track in detail. Metallurgical and welding technologies of rail welding and also process technologies reducing aftereffects of temperature exposure are important factors determining the quality and reliability of the continuous rail track. Analysis of the existing methods of rail welding enable to find the research line for solving this problem.

Rail-to-rail differential input amplification stage with main and surrogate differential pairs

DOEpatents

Britton, Jr., Charles Lanier; Smith, Stephen Fulton

2007-03-06

An operational amplifier input stage provides a symmetrical rail-to-rail input common-mode voltage without turning off either pair of complementary differential input transistors. Secondary, or surrogate, transistor pairs assume the function of the complementary differential transistors. The circuit also maintains essentially constant transconductance, constant slew rate, and constant signal-path supply current as it provides rail-to-rail operation.

Green Streets Help Baltimore, Others

EPA Pesticide Factsheets

Fifteen Green Streets, Green Towns, Green Jobs (G3) grants for will support projects in three states, including the conversion of hard surfaces to green space at Sarah’s Hope, a homeless shelter in a troubled Baltimore neighborhood.

Preliminary national rail plan.

DOT National Transportation Integrated Search

2009-10-15

The Passenger Rail Investment and Improvement Act of 2008 (PRIIA) directed the Administrator of the Federal Railroad Administration (FRA) to develop a Preliminary National Rail Plan (PNRP or Preliminary Plan) to address the rail needs of the Nation. ...

75 FR 76520 - Tennessee Southern Railroad Company, Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... family by converting two of its subsidiaries from corporations into limited liability companies: (1... Railroad Company, Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot Rail Corp.--Corporate Family... Railroad Company (TSRR), Patriot Rail, LLC (PRL) and its subsidiaries, Patriot Rail Holdings LLC (PRH) and...

Identification and prioritization of rail squat defects in the field using rail magnetisation technology

NASA Astrophysics Data System (ADS)

Kaewunruen, Sakdirat

2015-04-01

Inevitably, rail squats and studs are continuing to be a serious problem for railway organisations around the world in the 21st century. They are typically classified as the growth of any cracks that have grown longitudinally through the subsurface and some of the cracks propagating to the bottom of rails transversely, and have branched from initial longitudinal cracks with a depression of rail surface. The horizontal crack, which results in a depression of rail surface, induces increased maintenance level, more frequent monitoring, compromised rail testing (as the crack shields the signal echoes), and possible broken rails. This paper presents field investigations using a magnetised-rail testing device developed by MRX Technologies to identify and prioritise the rail squats. Most of the in situ squats were found on the high rail of the transition (variable-radius curved track), which is associated with rolling contact fatigue (RCF). This investigation highlights the field performance of the MRX's surface crack detection technology in comparison with the traditional ultrasonic method and detailed walking inspection. Visually, it was found in the field that the size of the RCF squats varies from very small to moderate. The predicted crack data were obtained by scanning the magnitised rails. The comparison of the actual crack depths (ultrasonic) and the predicted crack depths (MRX device) shows: • A possible correlation for small RCF/ squat cracks. • Poor interpretation of larger defects and welds. The field assessment also suggests some practical issues required for further development, including the detection of rail spalling, deep transverse crack, welding, and so on.

Possible Concepts for Waterproofing of Norwegian TBM Railway Tunnels

NASA Astrophysics Data System (ADS)

Dammyr, Øyvind; Nilsen, Bjørn; Thuro, Kurosch; Grøndal, Jørn

2014-05-01

The aim of this paper is to evaluate and compare the durability, life expectancy and maintenance needs of traditional Norwegian waterproofing concepts to the generally more rigid waterproofing concepts seen in other European countries. The focus will be on solutions for future Norwegian tunnel boring machine railway tunnels. Experiences from operation of newer and older tunnels with different waterproofing concepts have been gathered and analyzed. In the light of functional requirements for Norwegian rail tunnels, some preliminary conclusions about suitable concepts are drawn. Norwegian concepts such as polyethylene panels and lightweight concrete segments with membrane are ruled out. European concepts involving double shell draining systems (inner shell of cast concrete with membrane) and single shell undrained systems (waterproof concrete segments) are generally evaluated as favorable. Sprayable membranes and waterproof/insulating shotcrete are welcomed innovations, but more research is needed to verify their reliability and cost effectiveness compared to the typical European concepts. Increasing traffic and reliance on public transport systems in Norway result in high demand for durable and cost effective solutions.

The Private Management of Public Schools: The Baltimore, Maryland, Experience.

ERIC Educational Resources Information Center

Doughty, Sherri

In 1992 the Baltimore City Public School District (Maryland) entered into a 5-year contract with Education Alternatives, Incorporated (EAI), to manage 9 of its schools. Baltimore's private-management model differed significantly from that of Dade County, Florida, in that EAI was given overall management responsibility. Data were gathered through a…

Watersheds in Baltimore, Maryland: understanding and application of integrated ecological and social processes

Treesearch

Steward T.A. Pickett; Kenneth T. Belt; Michael F. Galvin; Peter M. Groffman; J. Morgan Grove; Donald C. Outen; Richard V. Pouyat; William P. Stack; Mary L. Cadenasso

2007-01-01

The Water and Watersheds program has made significant and lasting contributions to the basic understanding of the complex ecological system of Baltimore, MD. Funded at roughly the same time as the urban Long- Term Ecological Research (LTER) project in Baltimore, the Water and Watersheds grant and the LTER grant together established the Baltimore Ecosystem Study (BES)...

76 FR 22747 - RailAmerica, Inc., Palm Beach Holdings, Inc., RailAmerica Transportation Corp., RailTex, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

...., Palm Beach Holdings, Inc., RailAmerica Transportation Corp., RailTex, Inc., Fortress Investment Group, LLC, and RR Acquisition Holding, LLC--Continuance in Control Exemption-- Conecuh Valley Railway, LLC...), Fortress Investment Group, LLC (Fortress), and RR Acquisition Holding, LLC (RR Acquisition) (collectively...

Baltimore Urban Waters Partnership Conceptual Framework

EPA Pesticide Factsheets

Patapsco Watershed/Baltimore Region (Maryland) Area of the Urban Waters Federal Partnership (UWFP) reconnects urban communities with their waterways by improving coordination among federal agencies and collaborating with community-led efforts.

Rail transportation : Federal Railroad Administration's new approach to rail safety

DOT National Transportation Integrated Search

1997-07-01

In 1980, the Congress passed the Staggers Rail Act, which fostered substantial changes in the railroad industry. By 1995, fewer large freight railroads accounted for most of the industry's revenue and train miles. At the same time, these freight rail...

Radial arm strike rail

DOEpatents

McKeown, Mark H.; Beason, Steven C.

1991-01-01

The radial arm strike rail assembly is a system for measurement of bearings, directions, and stereophotography for geologic mapping, particularly where magnetic compasses are not appropriate. The radial arm, pivoting around a shaft axis, provides a reference direction determination for geologic mapping and bearing or direction determination. The centerable and levelable pedestal provide a base for the radial arm strike rail and the telescoping camera pedestal. The telescoping feature of the radial arm strike rail allows positioning the end of the rail for strike direction or bearing measurement with a goniometer.

40 CFR 81.28 - Metropolitan Baltimore Intrastate Air Quality Control Region.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.28 Metropolitan Baltimore Intrastate Air Quality Control Region. The Metropolitan Baltimore Intrastate Air Quality Control Region (Maryland) consists of the territorial area...

40 CFR 81.28 - Metropolitan Baltimore Intrastate Air Quality Control Region.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.28 Metropolitan Baltimore Intrastate Air Quality Control Region. The Metropolitan Baltimore Intrastate Air Quality Control Region (Maryland) consists of the territorial area...

40 CFR 81.28 - Metropolitan Baltimore Intrastate Air Quality Control Region.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.28 Metropolitan Baltimore Intrastate Air Quality Control Region. The Metropolitan Baltimore Intrastate Air Quality Control Region (Maryland) consists of the territorial area...

40 CFR 81.28 - Metropolitan Baltimore Intrastate Air Quality Control Region.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.28 Metropolitan Baltimore Intrastate Air Quality Control Region. The Metropolitan Baltimore Intrastate Air Quality Control Region (Maryland) consists of the territorial area...

40 CFR 81.28 - Metropolitan Baltimore Intrastate Air Quality Control Region.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.28 Metropolitan Baltimore Intrastate Air Quality Control Region. The Metropolitan Baltimore Intrastate Air Quality Control Region (Maryland) consists of the territorial area...

Background Pressure Profiles for Sonic Boom Vehicle Testing in the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

NASA Technical Reports Server (NTRS)

Castner, Raymond; Shaw, Stephen; Adamson, Eric; Simerly, Stephanie

2013-01-01

In an effort to identify test facilities that offer sonic boom measurement capabilities, an exploratory test program was initiated using wind tunnels at NASA research centers. The subject of this report is the sonic boom pressure rail data collected in the Glenn Research Center 8- by 6-Foot Supersonic Wind Tunnel. The purpose is to summarize the lessons learned based on the test activity, specifically relating to collecting sonic boom data which has a large amount of spatial pressure variation. The wind tunnel background pressure profiles are presented as well as data which demonstrated how both wind tunnel Mach number and model support-strut position affected the wind tunnel background pressure profile. Techniques were developed to mitigate these effects and are presented.

Optimization of wheel-rail interface friction using top-of-rail friction modifiers: State of the art

NASA Astrophysics Data System (ADS)

Khan, M. Roshan; Dasaka, Satyanarayana Murty

2018-05-01

High Speed Railways and Dedicated Freight Corridors are the need of the day for fast and efficient transportation of the ever growing population and freight across long distances of travel. With the increase in speeds and axle loads carried by these trains, wearing out of rails and train wheel sections are a common issue, which is due to the increase in friction at the wheel-rail interfaces. For the cases where the wheel-rail interface friction is less than optimum, as in case of high speed trains with very low axle loads, wheel-slips are imminent and loss of traction occurs when the trains accelerate rapidly or brake all of a sudden. These vast variety of traction problems around the wheel-rail interface friction need to be mitigated carefully, so that the contact interface friction neither ascents too high to cause material wear and need for added locomotive power, nor be on the lower side to cause wheel-slips and loss of traction at high speeds. Top-of-rail friction modifiers are engineered surface coatings applied on top of rails, to maintain an optimum frictional contact between the train wheels and the rails. Extensive research works in the area of wheel-rail tribology have revealed that the optimum frictional coefficients at wheel-rail interfaces lie at a value of around 0.35. Application of top-of-rail (TOR) friction modifiers on rail surfaces add an extra layer of material coating on top of the rails, with a surface frictional coefficient of the desired range. This study reviews the common types of rail friction modifiers, the methods for their application, issues related with the application of friction modifiers, and a guideline on selection of the right class of coating material based on site specific requirements of the railway networks.

75 FR 24774 - Fairmount Bank, Baltimore, MD; Approval of Conversion Application

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-36 OTS Nos. 08193 and H4677] Fairmount Bank, Baltimore, MD; Approval of Conversion Application Notice is hereby given that on April 15, 2010, the Office of Thrift Supervision approved the application of Fairmount Bank, Baltimore, Maryland, to...

A survey of wheel-rail contact models for rail vehicles

NASA Astrophysics Data System (ADS)

Meymand, Sajjad Z.; Keylin, Alexander; Ahmadian, Mehdi

2016-03-01

Accurate and efficient contact models for wheel-rail interaction are essential for the study of the dynamic behaviour of a railway vehicle. Assessment of the contact forces and moments, as well as contact geometry provide a fundamental foundation for such tasks as design of braking and traction control systems, prediction of wheel and rail wear, and evaluation of ride safety and comfort. This paper discusses the evolution and the current state of the theories for solving the wheel-rail contact problem for rolling stock. The well-known theories for modelling both normal contact (Hertzian and non-Hertzian) and tangential contact (Kalker's linear theory, FASTSIM, CONTACT, Polach's theory, etc.) are reviewed. The paper discusses the simplifying assumptions for developing these models and compares their functionality. The experimental studies for evaluation of contact models are also reviewed. This paper concludes with discussing open areas in contact mechanics that require further research for developing better models to represent the wheel-rail interaction.

2000 Montana state rail plan update

DOT National Transportation Integrated Search

2000-01-01

This 2000 Montana Rail Plan Update is a comprehensive update of the State Rail Plan. The purpose of this update is to review the State's role in rail planning, retain eligibility for Local Rail Freight Assistance (LRFA) funding, update the descriptio...

Baltimore and the Portfolio School District Strategy. Portfolio School Districts Project

ERIC Educational Resources Information Center

Yatsko, Sarah

2012-01-01

In November 2010, Baltimore's Fund for Education Excellence and the Annie E. Casey Foundation approached the Center on Reinventing Public Education (CRPE) and requested a case study of the implementation of Baltimore City Public Schools' (City Schools) portfolio strategy. These local foundations were interested in understanding how the district…

Securing America’s Passenger-Rail Systems

DTIC Science & Technology

2007-01-01

around the world highlight the vulnerability of rail travel and the importance of rail security for these passengers. The use of passenger rail and...take to U.S. railways. Recent attacks on passenger-rail systems around the world highlight the vulnerability of rail travel and the importance of rail...rails (Boardman, 2005), making more than 3.5 billion trips (APTA, 2006).1 And these estimates do not count the passengers traveling on the National

Natal plumage characters in rails

USGS Publications Warehouse

Wetherbee, D.K.; Meanley, B.

1965-01-01

The downy young of the Clapper Rail (Rallus longirostris), King Rail (Rallus elegans), and Virginia Rail (Rallus limicola) are described as totally black in all literature examined by us. Wetherbee (Bird-Banding, 32: 141-159, 1961) noted that some neonates of Virginia Rail from Storrs, Connecticut, had patches of white down below the wings. "Neonatal" pertains to the developmental condition or characters at hatching distinct from the much abused term "natal" which in ornithology pertains to the condition or characters from hatching to acquisition of teleoptile plumage. The presence of similar patches of white down was observed by us in the Clapper Rails at Chincoteague, Virginia (Figure 1). An examination of many hundreds of specimens from the ranges of most of the subspecies of Clapper Rails, including the strongly contrasting R. longirostris saturatus from Louisiana, revealed the almost invariable presence of at least 1 and sometimes as many as 30 white neossoptiles in the anterior abdominal regions of the ventral pterylae. Conversely, no King Rail neonate examined by us has shown a white neossoptile.

Initiating Population Education in Baltimore

ERIC Educational Resources Information Center

Cochran, Caroline S.; McCrea, Lester C.

1974-01-01

After identifying the need for population education in Baltimore City Schools, the school system had the problem of initiating such a course. Working with the Planned Parenthood Association of Maryland, the school system sponsored an in-service program for teachers that resulted in the production of materials for all grades. (MA)

Analysis of Lateral Rail Restraint.

DOT National Transportation Integrated Search

1983-09-01

This report deals with the analysis of lateral rail strength using the results of experimental investigations and a nonlinear rail response model. Part of the analysis involves the parametric study of the influence of track parameters on lateral rail...

Rail Modernization Study

DOT National Transportation Integrated Search

1987-04-01

This study summarizes the results of a multi-year assessment of the rail transit and commuter rail systems. The work was based on an earlier study design effort. The purposes of the study were to determine the costs of upgrading and modernizing urban...

Hazardous Materials Flow by Rail

DOT National Transportation Integrated Search

1990-03-01

The report presents a quantitative overview of the movement of hazardous materials by rail in the United States. The data used is a hazardous materials rail waybill sample developed at TSC from the 1983 Rail Waybill Sample. The report examines (1) th...

46 CFR 169.329 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 169.329 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 169.329 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 169.329 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 169.329 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

75 FR 16374 - Special Local Regulations for Marine Events; Patapsco River, Northwest Harbor, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... establish special local regulations during the ``Baltimore Dragon Boat Challenge,'' a marine event to be... later notice in the Federal Register. Background and Purpose On June 19, 2010, Baltimore Dragon Boat Club, Inc. will sponsor Dragon Boat Races in the Patapsco River, Northwest Harbor at Baltimore, MD. The...

76 FR 19926 - Special Local Regulations for Marine Events; Patapsco River, Northwest Harbor, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... establish special local regulations during the ``Baltimore Dragon Boat Challenge,'' a marine event to be... June 25, 2011, the Baltimore Dragon Boat Club will sponsor Dragon Boat Races in the Patapsco River, Northwest Harbor, at Baltimore, MD. The event will consist of approximately 15 teams rowing Chinese Dragon...

76 FR 30823 - Special Local Regulations for Marine Events; Patapsco River, Northwest Harbor, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... local regulations during the ``Baltimore Dragon Boat Challenge'', a marine event to be held on the... June 25, 2011, Baltimore Dragon Boat Club, Inc. will sponsor Dragon Boat Races in the Patapsco River, Northwest Harbor, at Baltimore, MD. The event will consist of approximately 15 teams rowing Chinese Dragon...

The Channel Tunnel

NASA Technical Reports Server (NTRS)

2006-01-01

The Channel Tunnel is a 50.5 km-long rail tunnel beneath the English Channel at the Straits of Dover. It connects Dover, Kent in England with Calais, northern France. The undersea section of the tunnel is unsurpassed in length in the world. A proposal for a Channel tunnel was first put forward by a French engineer in 1802. In 1881, a first attempt was made at boring a tunnel from the English side; the work was halted after 800 m. Again in 1922, English workers started boring a tunnel, and advanced 120 m before it too was halted for political reasons. The most recent attempt was begun in 1987, and the tunnel was officially opened in 1994. At completion it was estimated that the project cost around $18 billion. It has been operating at a significant loss since its opening, despite trips by over 7 million passengers per year on the Eurostar train, and over 3 million vehicles per year.

With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), ASTER images Earth to map and monitor the changing surface of our planet.

ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products.

The broad spectral coverage and high spectral resolution of ASTER provides scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring

Analyses of rail chill effect

DOT National Transportation Integrated Search

1998-06-01

The principles of heat transfer are applied to analyze the so-called "rail chill" effect, which refers to hear loss by conduction from a hot rail vehicle wheel through the contact area into a cold rail, the wheel having been heated by friction brakin...

46 CFR 169.327 - Deck rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.327 Deck rails. (a) All rails or lifelines must be at least 30 inches high... through bolted or welded to the deck. (b) Rails or lifelines must consist of evenly spaced courses. The...

46 CFR 169.327 - Deck rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.327 Deck rails. (a) All rails or lifelines must be at least 30 inches high... through bolted or welded to the deck. (b) Rails or lifelines must consist of evenly spaced courses. The...

46 CFR 177.920 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 177.920 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 177.920 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 127.320 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

46 CFR 127.320 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

46 CFR 177.920 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 127.320 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

46 CFR 127.320 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

46 CFR 177.920 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

46 CFR 127.320 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

75 FR 27430 - Special Local Regulations for Marine Events; Patapsco River, Northwest Harbor, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... local regulations during the ``Baltimore Dragon Boat Challenge'', a marine event to be held on the... public meeting was requested, and none was held. Basis and Purpose On June 19, 2010, Baltimore Dragon Boat Club, Inc. will sponsor Dragon Boat Races in the Patapsco River, Northwest Harbor at Baltimore, MD...

46 CFR 169.327 - Deck rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Deck rails. 169.327 Section 169.327 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.327 Deck rails. (a) All rails or lifelines must be at least 30 inches high...

46 CFR 169.327 - Deck rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Deck rails. 169.327 Section 169.327 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.327 Deck rails. (a) All rails or lifelines must be at least 30 inches high...

46 CFR 108.221 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

46 CFR 108.221 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

46 CFR 108.221 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

46 CFR 108.221 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

46 CFR 108.221 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

Baltimore Community Schools: Promise & Progress

ERIC Educational Resources Information Center

Durham, Rachel E.; Connolly, Faith

2016-01-01

This report documents the interim progress of the Baltimore Community School (CommSch) strategy by examining outcomes for the 2014-15 school year. Results show that CommSch parents more often reported being connected with community resources by school staff compared to parents at other schools. They also were more likely to report that school…

Chlamydia trachomatis infection among 15- to 35-year-olds in Baltimore, MD.

PubMed

Eggleston, Elizabeth; Rogers, Susan M; Turner, Charles F; Miller, William C; Roman, Anthony M; Hobbs, Marcia M; Erbelding, Emily; Tan, Sylvia; Villarroel, Maria A; Ganapathi, Laxminarayana

2011-08-01

Chlamydia trachomatis (Ct) is the most frequently reported infectious disease in the United States. This article reports population and subpopulation prevalence estimates of Ct and correlates of infection among 15- to 35-year-olds in Baltimore, MD. The Monitoring STIs Survey Program (MSSP) monitored sexually transmitted infection (STI) prevalence among probability samples of residents of Baltimore, a city with high STI rates. MSSP respondents completed telephone audio computer-assisted self-interviews and provided biospecimens for STI testing. Among 2120 Baltimore residents aged 15 to 35 years, the estimated prevalence of chlamydia was 3.9% (95% confidence interval [CI]: 2.8, 5.0). Prevalence was 5.8% (95% CI: 4.1, 7.6) among black MSSP respondents versus 0.7% (95% CI: 0.0, 1.4) among nonblack respondents; all but 4 infections detected were among black respondents. Sexual behaviors and other factors associated with infection were far more prevalent among black than nonblack Baltimore residents. Racial disparities persisted after adjustment for sociodemographic, behavioral, and health factors. The MSSP highlights a higher Ct prevalence among young people in Baltimore than in the United States overall, with notable racial disparities in infection and associated risk behaviors. Public health efforts are needed to improve the diagnosis and treatment of asymptomatic infections in this population.

Chlamydia trachomatis infection among 15-35 year-olds in Baltimore, MD, USA

PubMed Central

Eggleston, Elizabeth; Rogers, Susan M; Turner, Charles F; Miller, William C.; Roman, Anthony M; Hobbs, Marcia M.; Erbelding, Emily; Tan, Sylvia; Villarroel, Maria A.; Ganapathi, Laxminarayana

2011-01-01

Background Chlamydia trachomatis (Ct) is the most frequently reported infectious disease in the U.S. This article reports population and subpopulation prevalence estimates of Ct and correlates of infection among 15-35 year-olds in Baltimore, MD, USA. Methods The Monitoring STIs Survey Program (MSSP) monitored STI prevalence among probability samples of residents of Baltimore, a city with high STI rates. MSSP respondents completed telephone audio computer-assisted self-interviews and provided biospecimens for STI testing. Results Among 2120 Baltimore residents aged 15 to 35 years, the estimated prevalence of chlamydia was 3.9% (95% Cl: 2.8, 5.0). Prevalence was 5.8% (95% Cl: 4.1, 7.6) among black MSSP respondents versus 0.7% (95% Cl: 0.0, 1.4) among nonblack respondents; all but four infections detected were among black respondents. Sexual behaviors and other factors associated with infection were far more prevalent among black than nonblack Baltimore residents. Racial disparities persisted after adjustment for sociodemographic, behavioral and health factors. Conclusion The MSSP highlights a higher Ct prevalence among young people in Baltimore than in the U.S. overall, with notable racial disparities in infection and associated risk behaviors. Public health efforts are needed to improve the diagnosis and treatment of asymptomatic infections in this population. PMID:21844726

Visualizing and Understanding Socio-Environmental Dynamics in Baltimore

NASA Astrophysics Data System (ADS)

Zaitchik, B. F.; Omeara, K.; Guikema, S.; Scott, A.; Bessho, A.; Logan, T. M.

2015-12-01

The City of Baltimore, like any city, is the sum of its component neighborhoods, institutions, businesses, cultures, and, ultimately, its people. It is also an organism in its own right, with distinct geography, history, infrastructure, and environments that shape its residents even as it is shaped by them. Sometimes these interactions are obvious but often they are not; while basic economic patterns are widely documented, the distribution of socio-spatial and environmental connections often hides below the surface, as does the potential that those connections hold. Here we present results of a collaborative initiative on the geography, design, and policy of socio-environmental dynamics of Baltimore. Geospatial data derived from satellite imagery, demographic databases, social media feeds, infrastructure plans, and in situ environmental networks, among other sources, are applied to generate an interactive portrait of Baltimore City's social, health, and well-being dynamics. The layering of data serves as a platform for visualizing the interconnectedness of the City and as a database for modeling risk interactions, vulnerabilities, and strengths within and between communities. This presentation will provide an overview of project findings and highlight linkages to education and policy.

The history and nature of the Baltimore applications project

NASA Technical Reports Server (NTRS)

Peake, H. J.

1978-01-01

The Baltimore Applications Project (BAP), an experiment jointly conducted by the City of Baltimore and the National Aeronautics and Space Administration (NASA), was begun in May 1974 in response to a request by the City. The main purpose of the BAP is the identification of technology for beneficial application to the City operations. An independent evaluation, performed after three years of operation, indicates very good project results and confirms the choices of the experiment's basic features. The BAP demonstrates one way to achieve successful intergovernmental transfer of Federal technology.

76 FR 80230 - Amendment of Class D and E Airspace; Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... November 28, 2011, amending controlled airspace at Martin State Airport, Baltimore, MD. DATES: Effective... published a final rule in the Federal Register amending Class D and E airspace at Martin State Airport... the airspace designation for the Class D and Class E airspace areas at Martin State Airport, Baltimore...

Effect of Wheel/Rail Loads on Concrete Tie Stresses and Rail Rollover.

DOT National Transportation Integrated Search

2011-09-21

As a result of vertical and lateral wheel/rail forces, high contact stresses can develop at the interface between the rail base and tie. Under certain conditions, these stresses can exceed the strength of the concrete tie and result in deterioration ...

Crashworthiness evaluation of light rail vehicle interiors.

DOT National Transportation Integrated Search

2011-12-01

Statistically, light rail transit (LRT) systems have higher injury rates on a perpassengermile basis than heavy rail and commuter rail systems, because in most cities, light rail vehicles (LRVs) operate on city streets. Passenger safety is depe...

Fast rail corrugation detection based on texture filtering

NASA Astrophysics Data System (ADS)

Xiao, Jie; Lu, Kaixia

2018-02-01

The condition detection of rails in high-speed railway is one of the important means to ensure the safety of railway transportation. In order to replace the traditional manual inspection, save manpower and material resources, and improve the detection speed and accuracy, it is of great significance to develop a machine vision system for locating and identifying defects on rails automatically. Rail defects exhibit different properties and are divided into various categories related to the type and position of flaws on the rail. Several kinds of interrelated factors cause rail defects such as type of rail, construction conditions, and speed and/or frequency of trains using the rail. Rail corrugation is a particular kind of defects that produce an undulatory deformation on the rail heads. In high speed train, the corrugation induces harmful vibrations on wheels and its components and reduces the lifetime of rails. This type of defects should be detected to avoid rail fractures. In this paper, a novel method for fast rail corrugation detection based on texture filtering was proposed.

"A Library They Deserve": The Baltimore Elementary and Middle School Library Project

ERIC Educational Resources Information Center

Sheldon, Steven B.; Davis, Marcia H.; Connolly, Faith

2014-01-01

The Harry and Jeanette Weinberg Foundation has partnered with Baltimore Education Research Consortium (BERC) to complete a series of reports examining the implementation and impact of the Baltimore Elementary and Middle School Library Project (Library Project). This report on the first year of the project examines the experiences of the…

Pulmonary embolism after long duration rail travel: economy class syndrome or rail coach syndrome.

PubMed

Mittal, S K; Chopra, S; Calton, R

2011-07-01

Pulmonary embolism after long duration air travel is well described. However it can also occur following a long duration rail or road transport. We present a case of 43 year old male who developed deep venous thrombosis and acute pulmonary embolism after a long rail journey. We propose to call it as rail coach syndrome and stress the need for taking the same preventive measures as recommended for airline passengers.

49 CFR 37.83 - Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public...

Code of Federal Regulations, 2010 CFR

2010-10-01

... lease of remanufactured rail vehicles by public entities operating rapid or light rail systems. 37.83... operating rapid or light rail systems. (a) This section applies to any public entity operating a rapid or... operates a rapid or light rail system any segment of which is included on the National Register of Historic...

49 CFR 37.83 - Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public...

Code of Federal Regulations, 2014 CFR

2014-10-01

... lease of remanufactured rail vehicles by public entities operating rapid or light rail systems. 37.83... operating rapid or light rail systems. (a) This section applies to any public entity operating a rapid or... operates a rapid or light rail system any segment of which is included on the National Register of Historic...

49 CFR 37.83 - Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public...

Code of Federal Regulations, 2011 CFR

2011-10-01

... lease of remanufactured rail vehicles by public entities operating rapid or light rail systems. 37.83... operating rapid or light rail systems. (a) This section applies to any public entity operating a rapid or... operates a rapid or light rail system any segment of which is included on the National Register of Historic...

49 CFR 37.83 - Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public...

Code of Federal Regulations, 2013 CFR

2013-10-01

... lease of remanufactured rail vehicles by public entities operating rapid or light rail systems. 37.83... operating rapid or light rail systems. (a) This section applies to any public entity operating a rapid or... operates a rapid or light rail system any segment of which is included on the National Register of Historic...

49 CFR 37.83 - Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public...

Code of Federal Regulations, 2012 CFR

2012-10-01

... lease of remanufactured rail vehicles by public entities operating rapid or light rail systems. 37.83... operating rapid or light rail systems. (a) This section applies to any public entity operating a rapid or... operates a rapid or light rail system any segment of which is included on the National Register of Historic...

Students and NASA Study Aerosols over Baltimore

NASA Image and Video Library

2003-06-11

During Spring 2003, students, teachers, and scientists worked side-by-side, measuring the properties of aerosols fine particulate matter suspended in the air over Baltimore, Maryland using hand-held instruments shown here by NASA Terra spacecraft.

Rail base corrosion and cracking prevention

DOT National Transportation Integrated Search

2014-07-01

Rail base corrosion combined with fatigue or damage can significantly reduce rail life. Studies were done to examine the relative contribution of damage, corrosion, and fatigue on rail life. The combined effects can be separated into constituent fact...

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

Baltimore District Tackles High Suspension Rates

ERIC Educational Resources Information Center

Maxwell, Lesli A.

2007-01-01

This article reports on how the Baltimore District tackles its high suspension rates. Driven by an increasing belief that zero-tolerance disciplinary policies are ineffective, more educators are embracing strategies that do not exclude misbehaving students from school for offenses such as insubordination, disrespect, cutting class, tardiness, and…

Alabama rail directory 2001

DOT National Transportation Integrated Search

2002-01-01

The State of Alabama is crisscrossed by some 4,728 miles rail lines hauling 93.5 million tons of cargo annually. This directory, Alabama's first comprehensive rail directory, provides a range of information regarding railroads operating in the state,...

Bibliography on Rail Technology

DOT National Transportation Integrated Search

1977-03-01

This rail technology review provides assistance to a number of rail technology programs initiated by the Transportation Systems Center (TSC) for the Federal Railroad Administration (FRA). The results of a search and review in four specific areas in t...

78 FR 65244 - Rail Vehicles Access Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

...-0001] RIN 3014-AA42 Rail Vehicles Access Advisory Committee AGENCY: Architectural and Transportation Barriers Compliance Board. ACTION: Notice of advisory committee meeting. SUMMARY: The Rail Vehicles Access... vehicles that operate on fixed guideway systems (e.g., rapid rail, light rail, commuter rail, intercity...

Sediment accumulation and water volume in Loch Raven Reservoir, Baltimore County, Maryland

USGS Publications Warehouse

Banks, William S.L.; LaMotte, Andrew E.

1999-01-01

Baltimore City and its metropolitan area are supplied with water from three reservoirs, Liberty Reservoir, Prettyboy Reservoir, and Loch Raven Reservoir. Prettyboy and Loch Raven Reservoirs are located on the Gunpowder Falls (figure 1). The many uses of the reservoir system necessitate coordination and communication among resource managers. The 1996 Amendment to the Safe Drinking Water Act require States to complete source-water assessments for public drinking-water supplies. As part of an ongoing effort to provide safe drinking water and as a direct result of these laws, the City of Baltimore and the Maryland Department of the Environment (MDE), in cooperation with other State and local agencies, are studying the Gunpowder Falls Basin and its role as a source of water supply to the Baltimore area. As a part of this study, the U.S. Geological Survey (USGS), in cooperation with the Maryland Geological Survey (MGS), with funding provided by the City of Baltimore and MDE, is examining sediment accumulation in Loch Raven Reservoir. The Baltimore City Department of Public Works periodically determines the amount of water that can be stored in its reservoirs. To make this determination, field crews measure the water depth along predetermined transects or ranges. These transects provide consistent locations where water depth, or bathymetric, measurements can be made. Range surveys are repeated to provide a record of the change in storage capacity due to sediment accumulation over time. Previous bathymetric surveys of Loch Raven Reservoir were performed in 1943, 1961, 1972, and 1985. Errors in data-collection and analysis methods have been assessed and documented (Baltimore City Department of Public Works, 1989). Few comparisons can be made among survey results because of changing data-collection techniques and analysis methods.

RadNet Air Data From Baltimore, MD

EPA Pesticide Factsheets

This page presents radiation air monitoring and air filter analysis data for Baltimore, MD from EPA's RadNet system. RadNet is a nationwide network of monitoring stations that measure radiation in air, drinking water and precipitation.

The Patapsco Forest Reserve: Establishing a "City Park" for Baltimore, 1907-1941

Treesearch

Geoffrey L. Buckley; Robert F. Bailey; J. Morgan Grove

2006-01-01

In 1897, a contributor to the editorial pages of the Baltimore News informed readers that Baltimore had "but one great park." Rather than lavish praise on Druid Hill Park, however, the editorialist chose to draw attention to the "undeveloped condition" of the city's other parks. After taking the mayor to task for ignoring the...

Family League 2011-12 Out of School Time Programs in Baltimore City

ERIC Educational Resources Information Center

Olson, Linda S.; Connolly, Faith; Kommajesula, Alok H.

2013-01-01

Out of School Time (OST) programs have been shown to promote positive personal, academic and social development (Huang, Gribbons, Kim, Lee, & Baker, 2000; Welsh et al., 2002). The Family League of Baltimore City works with partners to sponsor a range of after-school programs in Baltimore City Public Schools (City Schools) to provide healthy…

Wheel/Rail Noise and Vibration Control

DOT National Transportation Integrated Search

1974-05-01

Reported here are the interim results of a program under the UMTA Urban Rail Supporting Technology Program to develop a basic understanding of urban transit wheel/rail noise generation for application to the evaluation and improvement of wheel/rail n...

Undergraduate Certificate in Rail Transportation/Engineering.

DOT National Transportation Integrated Search

2016-05-05

A shift in the U.S. transportation environment has led to a revival in rail transport, especially in : freight rail1. In the meantime, an aging rail employee demographic presents a severe threat to : sufficient level of individuals equipped to handle...

Mapping the Future Today: The Community College of Baltimore County Geospatial Applications Program

ERIC Educational Resources Information Center

Jeffrey, Scott; Alvarez, Jaime

2010-01-01

The Geospatial Applications Program at the Community College of Baltimore County (CCBC), located five miles west of downtown Baltimore, Maryland, provides comprehensive instruction in geographic information systems (GIS), remote sensing and global positioning systems (GPS). Geospatial techniques, which include computer-based mapping and remote…

Wheel/Rail Noise and Vibration : Volume 1. Mechanics of Wheel Rail Noise Generation.

DOT National Transportation Integrated Search

1975-05-01

The final reports are reported of a project to develop a basic understanding of urban transit wheel/rail noise control measures. Analytical models of impedance, response, radiation efficiency, and directivity of wheels and rails are presented and com...

A Current-Mode Common-Mode Feedback Circuit (CMFB) with Rail-to-Rail Operation

NASA Astrophysics Data System (ADS)

Suadet, Apirak; Kasemsuwan, Varakorn

2011-03-01

This paper presents a current-mode common-mode feedback (CMFB) circuit with rail-to-rail operation. The CMFB is a stand-alone circuit, which can be connected to any low voltage transconductor without changing or upsetting the existing circuit. The proposed CMFB employs current mirrors, operating as common-mode detector and current amplifier to enhance the loop gain of the CMFB. The circuit employs positive feedback to enhance the output impedance and gain. The circuit has been designed using a 0.18 μm CMOS technology under 1V supply and analyzed using HSPICE with BSIM3V3 device models. A pseudo-differential amplifier using two common sources and the proposed CMFB shows rail to rail output swing (± 0.7 V) with low common-mode gain (-36 dB) and power dissipation of 390 μW.

Effects of tunnel and station size on the costs and service of subway transit systems

NASA Technical Reports Server (NTRS)

Dayman, B., Jr.

1979-01-01

The feasibility of less spacious, less costly underground rail mass transit system designs is studied. The major cost saving expected from alternative tunnel designs results from using precast concrete segment liners in place of steel. The saying expected for a two-foot decrease in the diameter of twin, single track tunnels is about two million dollars per route mile from 13 million dollars for precast concrete segment liners (a saving of about 16%). The cost per route-mile of a double track tunnel appears to be 15 to 25% higher than for the twin, single track tunnels. The effective cost saving expected from stations with four-car train capability instead of the usual eight-car trains is nearly 25% or seven million dollars per route mile. The saving in station costs can be obtained while improving service to the user (lower transit time and less waiting for trains) up to a capacity of 36,000 riders per hour in each direction.

Structure and Properties of Thermite Welds in Premium Rails

DOT National Transportation Integrated Search

1985-12-01

Thermite welds were used to join combinations of premium rails and AREA Controlled Cooled Carbon rails (i.e., standard rails). The premium rails comprised head-hardened rails and CrMo, CrV and Cr alloy rails. A major objective was to determine the fe...

New Hampshire state rail plan 2001

DOT National Transportation Integrated Search

2001-04-01

This report is the 2001 update to the New Hampshire Statewide Rail Plan, which was last updated in 1991 and amended in 1993. The Rail Plan presents an overview of the current status of the New Hampshire Rail System, who operates it and how it is util...

The process for technology transfer in Baltimore

NASA Technical Reports Server (NTRS)

Golden, T. S.

1978-01-01

Ingredients essential for a successful decision process relative to proper technological choices for a large city were determined during four years of experience in the NASA/Baltimore Applications Project. The general approach, rationale, and process of technology transfer are discussed.

Public School, Inc.: Baltimore's Risky Enterprise.

ERIC Educational Resources Information Center

Walsh, Norman J.

1995-01-01

Analyzes the Baltimore Public School District's contract with a private for-profit company to manage the instructional programs of nine schools. It shows that the award of the contract was solely a political consideration; no financial experts were involved. Additionally, the program has not improved test scores and is being challenged by the…

77 FR 11434 - Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-27

... and Historic Shrine in Baltimore, Maryland, and its return. This action will restrict vessel traffic... Historic Shrine, Baltimore, Maryland. After being turned-around, the USS CONSTELLATION will be returned to... of the historic sloop-of-war USS CONSTELLATION on May 25, 2012. This action is necessary to provide...

49 CFR 213.352 - Torch cut rail.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over that...

49 CFR 213.352 - Torch cut rail.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over that...

46 CFR 190.25-10 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 92.25-10 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 72.40-10 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

46 CFR 190.25-10 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 72.40-10 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

46 CFR 72.40-10 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

46 CFR 190.25-10 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 72.40-10 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

46 CFR 92.25-10 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 92.25-10 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 92.25-10 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 190.25-10 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 72.40-10 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

46 CFR 190.25-10 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

46 CFR 92.25-10 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

Analysis of rail welding methods for mine rail access with the use of modern technologies

NASA Astrophysics Data System (ADS)

Usoltsev, A. A.; Shevchenko, R. A.; Kozyrev, N. A.; Kriukov, R. E.; Shishkin, P. E.

2017-09-01

Welded joint zones are weak sections of the railway track for all traffic cases (in the case of high-speed traffic and heavy traffic). In the paper advantages and disadvantages of the basic ways of rails welding, which are widely used today, are considered: electrocontact and aluminothermic. Carefully selected mode of differentially thermally strengthened rails string will allow the process of correction after heat treatment to be minimized and internal residual compressive stresses to be kept. Particular attention should be paid to the method of rails welding, in which after rails welding during their cooling it is offered to perform quasi-isothermal exposure in the temperature range of fine structure formation by passing pulses of alternating electric current through the welded joint maintaining this temperature until the end of the transformation. The use of quasi-isothermal exposure at a temperature of 600 - 650 °C makes it possible to obtain a finely dispersed structure of the welded seam of rails without additional heat treatment.

Computation of wheel-rail contact force for non-mapping wheel-rail profile of Translohr tram

NASA Astrophysics Data System (ADS)

Ji, Yuanjin; Ren, Lihui; Zhou, Jinsong

2017-09-01

Translohr tram has steel wheels, in V-like arrangements, as guide wheels. These operate over the guide rails in inverted-V arrangements. However, the horizontal and vertical coordinates of the guide wheels and guide rails are not always mapped one-to-one. In this study, a simplified elastic method is proposed in order to calculate the contact points between the wheels and the rails. By transforming the coordinates, the non-mapping geometric relationship between wheel and rail is converted into a mapping relationship. Considering the Translohr tram's multi-point contact between the guide wheel and the guide rail, the elastic-contact hypothesis take into account the existence of contact patches between the bodies, and the location of the contact points is calculated using a simplified elastic method. In order to speed up the calculation, a multi-dimensional contact table is generated, enabling the use of simulation for Translohr tram running on curvatures with different radii.

Program Contacts for Patapsco Watershed/Baltimore Region (Maryland)

EPA Pesticide Factsheets

Patapsco Watershed/Baltimore Region (Maryland) Area of the Urban Waters Federal Partnership (UWFP) reconnects urban communities with their waterways by improving coordination among federal agencies and collaborating with community-led efforts.

76 FR 55335 - Alternate Passenger Rail Service Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

... proceeding to develop a pilot program that permits a rail carrier or rail carriers that own infrastructure... develop a pilot program that permits a rail carrier or rail carriers that own infrastructure over which... that permits a rail carrier or rail carriers that own infrastructure over which Amtrak operates a...

Ft. McHenry tunnel study: Source profiles and mercury emissions from diesel and gasoline powered vehicles

NASA Astrophysics Data System (ADS)

Landis, Matthew S.; Lewis, Charles W.; Stevens, Robert K.; Keeler, Gerald J.; Dvonch, J. Timothy; Tremblay, Raphael T.

During the fall of 1998, the US Environmental Protection Agency and the Florida Department of Environmental Protection sponsored a 7-day study at the Ft. McHenry tunnel in Baltimore, MD with the objective of obtaining PM 2.5 vehicle source profiles for use in atmospheric mercury source apportionment studies. PM 2.5 emission profiles from gasoline and diesel powered vehicles were developed from analysis of trace elements, polycyclic aromatic hydrocarbons (PAH), and condensed aliphatic hydrocarbons. PM 2.5 samples were collected using commercially available sampling systems and were extracted and analyzed using conventional well-established methods. Both inorganic and organic profiles were sufficiently unique to mathematically discriminate the contributions from each source type using a chemical mass balance source apportionment approach. However, only the organic source profiles provided unique PAH tracers (e.g., fluoranthene, pyrene, and chrysene) for diesel combustion that could be used to identify source contributions generated using multivariate statistical receptor modeling approaches. In addition, the study found significant emission of gaseous elemental mercury (Hg 0), divalent reactive gaseous mercury (RGM), and particulate mercury (Hg(p)) from gasoline but not from diesel powered motor vehicles. Fuel analysis supported the tunnel measurement results showing that total mercury content in all grades of gasoline (284±108 ng L -1) was substantially higher than total mercury content in diesel fuel (62±37 ng L -1) collected contemporaneously at local Baltimore retailers.

46 CFR 116.920 - Storm rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

46 CFR 116.920 - Storm rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

46 CFR 116.920 - Storm rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

46 CFR 116.920 - Storm rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

46 CFR 116.920 - Storm rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

Intercity passenger rail : assessing the benefits of increased federal funding for Amtrak and high-speed passenger rail systems

DOT National Transportation Integrated Search

2001-03-21

The Rail Passenger Service Act of 1970 created Amtrak to provide intercity passenger rail service. Like other major national intercity passenger rail systems in the world, Amtrak has received substantial government support-nearly $24 billion for capi...

An Estimation of Mobile Emissions Reduction from Using Electronic Toll Collection in the Baltimore Metropolitan Area: A Case Study of the Fort McHenry Tunnel Toll Plaza

DOT National Transportation Integrated Search

2000-03-01

The Baltimore Metropolitan Area is classified as a severe nonattainment area under the Clean Air Act Amendments of 1990. Consequently, it operates on a stringent emissions budget and is mandated to embark on mitigation measures. The area has been agg...

46 CFR 177.900 - Deck rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... rails must be designed and constructed to withstand a point load of 91 kilograms (200 pounds) applied at... simultaneously. (c) Where space limitations make deck rails impractical for areas designed for crew use only...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than...

46 CFR 177.900 - Deck rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... rails must be designed and constructed to withstand a point load of 91 kilograms (200 pounds) applied at... simultaneously. (c) Where space limitations make deck rails impractical for areas designed for crew use only...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than...

46 CFR 177.900 - Deck rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... rails must be designed and constructed to withstand a point load of 91 kilograms (200 pounds) applied at... simultaneously. (c) Where space limitations make deck rails impractical for areas designed for crew use only...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than...

46 CFR 177.900 - Deck rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... rails must be designed and constructed to withstand a point load of 91 kilograms (200 pounds) applied at... simultaneously. (c) Where space limitations make deck rails impractical for areas designed for crew use only...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than...

46 CFR 177.900 - Deck rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... rails must be designed and constructed to withstand a point load of 91 kilograms (200 pounds) applied at... simultaneously. (c) Where space limitations make deck rails impractical for areas designed for crew use only...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than...

Measles, social media and surveillance in Baltimore City.

PubMed

Warren, Katherine E; Wen, Leana S

2017-09-01

Baltimore City was faced with two potential measles outbreaks in 2015. Both cases occurred in the wake of national media attention paid to the Disneyland outbreaks of the same year. A comparative case study approach was used applying qualitative data to elicit best practices in infectious disease protocols in the age of social media. The research also used search engine data from Google Trends to track constituent engagement over time. Across the two case studies, the Baltimore City Health Department identified a number of best practices to inform the public via social media and minimize levels of misinformation and panic. These practices included clarity in messaging across platforms and public health jurisdictions; pre-emptor alerts of potential measles cases to control and shape the media messaging; and targeted, in-person outreach to engage groups in a culturally competent manner. The Baltimore City Health Department's response drew out a critical need for re-examining infectious disease protocols in the age of social media (e.g. contact notification, quarantine, media sensitivity) and anti-vaccination movements that pose new obstacles to government intervention. The benefits and challenges of greater connectivity between providers, patients, and public health officers are discussed. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A compact rail-to-rail CMOS buffer amplifier with very low quiescent current

NASA Astrophysics Data System (ADS)

Arslan, Emre; Yıldız, Merih; Minaei, Shahram

2015-06-01

In this work, a very compact, rail-to-rail, high-speed buffer amplifier for liquid crystal display (LCD) applications is proposed. Compared to other buffer amplifiers, the proposed circuit has a very simple architecture, occupies a small number of transistors and also has a large driving capacity with very low quiescent current. It is composed of two complementary differential input stages to provide rail-to-rail driving capacity. The push-pull transistors are directly connected to the differential input stage, and the output is taken from an inverter. The proposed buffer circuit is laid out using Mentor Graphics IC Station layout editor using AMS 0.35 μm process parameters. It is shown by post-layout simulations that the proposed buffer can drive a 1 nF capacitive load within a small settling time under a full voltage swing, while drawing only 1.6 μA quiescent current from a 3.3 V power supply.

Wind Tunnel Model Design for Sonic Boom Studies of Nozzle Jet with Shock Interactions

NASA Technical Reports Server (NTRS)

Cliff, Susan E.; Denison, Marie; Sozer, Emre; Moini-Yekta, Shayan

2016-01-01

NASA and Industry are performing vehicle studies of configurations with low sonic boom pressure signatures. The computational analyses of modern configuration designs have matured to the point where there is confidence in the prediction of the pressure signature from the front of the vehicle, but uncertainty in the aft signatures with often greater boundary layer effects and nozzle jet pressures. Wind tunnel testing at significantly lower Reynolds numbers than in flight and without inlet and nozzle jet pressures make it difficult to accurately assess the computational solutions of flight vehicles. A wind tunnel test in the NASA Ames 9- by 7-Foot Supersonic Wind Tunnel from Mach 1.6 to 2.0 will be used to assess the effects of shocks from components passing through nozzle jet plumes on the sonic boom pressure signature and provide datasets for comparison with CFD codes. A large number of high-fidelity numerical simulations of wind tunnel test models with a variety of shock generators that simulate horizontal tails and aft decks have been studied to provide suitable models for sonic boom pressure measurements using a minimally intrusive pressure rail in the wind tunnel. The computational results are presented and the evolution of candidate wind tunnel models is summarized and discussed in this paper.

75 FR 18058 - Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... historic sloop-of-war USS CONSTELLATION on May 27, 2010. This action is necessary to provide for the safety... Baltimore, Maryland, to a point on the Patapsco River near the Fort McHenry National Monument and Historic Shrine in Baltimore, Maryland, and its return. This action will restrict vessel traffic in portions of...

77 FR 25592 - Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

... historic sloop-of-war USS CONSTELLATION on May 24, 2012. This action is necessary to provide for the safety... Baltimore, Maryland, to a point on the Patapsco River near the Fort McHenry National Monument and Historic Shrine in Baltimore, Maryland, and its return. This action will restrict vessel traffic in portions of...

Wheel/Rail Noise and Vibration : Volume 2. Applications to Control of Wheel/Rail Noise.

DOT National Transportation Integrated Search

1975-05-01

The final reports are reported of a project to develop a basic understanding of urban transit wheel/rail noise control measures. Analytical models of impedance, response, radiation efficiency, and directivity of wheels and rails are presented and com...

Testing of the fracture resistance of rails

NASA Astrophysics Data System (ADS)

Swiderski, Zdzislaw

Various grades of rail steel as well as whole rail sections were subjected to fracture resistance tests according to the unified method. It was found that heat treatment of rails increased fracture resistance by 50 percent. However, residual stresses also had a substantial effect. Apparent durability values N(sub c) from the Wilson formula have been derived. The influence of residual stresses on rail durability is stated.

Real-time water quality monitoring and providing water quality information to the Baltimore Community

EPA Science Inventory

EPA and the U.S. Geological Survey (USGS) have initiated the “Village Blue” research project to provide real-time water quality monitoring data to the Baltimore community and increase public awareness about local water quality in Baltimore Harbor and the Chesapeake Ba...

Rail accelerator research at Lewis Research Center

NASA Technical Reports Server (NTRS)

Kerslake, W. R.; Cybyk, B. Z.

1982-01-01

A rail accelerator was chosen for study as an electromagnetic space propulsion device because of its simplicity and existing technology base. The results of a mission feasibility study using a large rail accelerator for direct launch of ton-size payloads from the Earth's surface to space, and the results of initial tests with a small, laboratory rail accelerator are presented. The laboratory rail accelerator has a bore of 3 by 3 mm and has accelerated 60 mg projectiles to velocities of 300 to 1000 m/s. Rail materials of Cu, W, and Mo were tested for efficiency and erosion rate.

Pedestrian/bicyclist warning devices and signs at highway-rail and pathway-rail grade crossings.

DOT National Transportation Integrated Search

2013-04-01

Federal reporting shows a relatively constant number of pedestrian and bicycle fatalities at highway-rail and : pathway-rail grade crossings over the past 10 years. This is in contrast to a marked decrease in trainvehicle : collisions at highway-r...

Developing course lecture notes on high-speed rail.

DOT National Transportation Integrated Search

2017-07-15

1. Introduction a. World-wide Development of High-Speed Rail (Japan, Europe, China) b. High-speed Rail in the U.S. 2. High-Speed Rail Infrastructure a. Geometric Design of High Speed Rail i. Horizontal Curve ii. Vertical Curve iii. Grade and Turnout ...

Reduction of background noise induced by wind tunnel jet exit vanes

NASA Technical Reports Server (NTRS)

Martin, R. M.; Brooks, T. F.; Hoad, D. R.

1985-01-01

The NASA-Langley 4 x 7 m wind tunnel develops low frequency flow pulsations at certain velocity ranges during open throat mode operation, affecting the aerodynamics of the flow and degrading the resulting model test data. Triangular vanes attached to the trailing edge of flat steel rails, mounted 10 cm from the inside of the jet exit walls, have been used to reduce this effect; attention is presently given to methods used to reduce the inherent noise generation of the vanes while retaining their pulsation reduction features.

Rail vs truck transport of biomass.

PubMed

Mahmudi, Hamed; Flynn, Peter C

2006-01-01

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.

Fence Posts and Rails

ERIC Educational Resources Information Center

Turton, Roger

2016-01-01

"Mathematical Lens" uses photographs as a springboard for mathematical inquiry and appears in every issue of "Mathematics Teacher." Recently while dismantling an old wooden post-and-rail fence, Roger Turton noticed something very interesting when he piled up the posts and rails together in the shape of a prism. The total number…

FY 1998 Proposed Rail Improvement Program Supplement

DOT National Transportation Integrated Search

1997-01-01

This FY 1998 Proposed Rail Improvement Program Supplement contains those rail plan amendments which have been published subsequent to the FY 1997 Proposed Rail Improvement program supplement. This document also contains the benefit/cost methodology u...

Assessment of Rail Seat Abrasion Patterns and Environment

DOT National Transportation Integrated Search

2012-05-01

Rail seat abrasion (RSA) of concrete ties is manifested by the loss of material under the rail seat area and, in extreme cases, results in loss of rail clip holding power, reverse rail cant, and gauge widening. RSA was measured in several curves on t...

It's not easy going green: Obstacles to tree-planting programs in East Baltimore

Treesearch

Michael Battaglia; Geoffrey L. Buckley; Michael Galvin; Morgan Grove

2014-01-01

In 2006, government officials in Baltimore announced plans to double the city's tree canopy over the next thirty years. While the effort has already produced positive results, many parts of the city still lack trees. In this paper we consider whether two neighborhoods in East Baltimore — Berea and Madison-Eastend — are suitable locations for tree...

On-line high-speed rail defect detection.

DOT National Transportation Integrated Search

2004-10-01

This report presents the results of phase 2 of the project On-line high-speed rail defect detection aimed at improving the reliability and the speed of current defect detection in rails. Ultrasonic guided waves, traveling in the rail running di...

40 CFR 201.13 - Standard for rail car operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Standard for rail car operations. 201... Interstate Rail Carrier Operations Standards § 201.13 Standard for rail car operations. Effective December 31, 1976, no carrier subject to this regulation shall operate any rail car or combination of rail cars...

40 CFR 201.13 - Standard for rail car operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Standard for rail car operations. 201... Interstate Rail Carrier Operations Standards § 201.13 Standard for rail car operations. Effective December 31, 1976, no carrier subject to this regulation shall operate any rail car or combination of rail cars...

40 CFR 201.13 - Standard for rail car operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Standard for rail car operations. 201... Interstate Rail Carrier Operations Standards § 201.13 Standard for rail car operations. Effective December 31, 1976, no carrier subject to this regulation shall operate any rail car or combination of rail cars...

40 CFR 201.13 - Standard for rail car operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Standard for rail car operations. 201... Interstate Rail Carrier Operations Standards § 201.13 Standard for rail car operations. Effective December 31, 1976, no carrier subject to this regulation shall operate any rail car or combination of rail cars...

40 CFR 201.13 - Standard for rail car operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Standard for rail car operations. 201... Interstate Rail Carrier Operations Standards § 201.13 Standard for rail car operations. Effective December 31, 1976, no carrier subject to this regulation shall operate any rail car or combination of rail cars...

2000 Florida rail system plan

DOT National Transportation Integrated Search

2000-01-01

The purpose of the Florida Rail System Plan is two-fold. First, it represents the rail : component of the Florida Transportation Plan (Agency Functional Plan) which, through an : annual series of policies, programs and projects, implements the Transp...

North Carolina rail plan 2000

DOT National Transportation Integrated Search

2001-01-01

The 2000 North Carolina Rail Plan examines the need for assistance for shortline railroads and describes the railroad industry in North Carolina. It also provides a description of and information about current programs operated by the Rail Division, ...

Process Evaluation of Baltimore Healthy Stores: A Pilot Health Intervention Program With Supermarkets and Corner Stores in Baltimore City

PubMed Central

Gittelsohn, Joel; Suratkar, Sonali; Song, Hee-Jung; Sacher, Suzanne; Rajan, Radha; Rasooly, Irit R.; Bednarek, Erin; Sharma, Sangita; Anliker, Jean A.

2011-01-01

Reduced access to affordable healthy foods is linked to higher rates of chronic diseases in low-income urban settings. The authors conduct a feasibility study of an environmental intervention (Baltimore Healthy Stores) in seven corner stores owned by Korean Americans and two supermarkets in low-income East Baltimore. The goal is to increase the availability of healthy food options and to promote them at the point of purchase. The process evaluation is conducted largely by external evaluators. Participating stores stock promoted foods, and print materials are displayed with moderate to high fidelity. Interactive consumer taste tests are implemented with high reach and dose. Materials developed specifically for Korean American corner store owners are implemented with moderate to high fidelity and dose. Results indicate that small food store–based intervention programs are feasible to implement and are a viable means of increasing healthy food availability and a good location for point-of-purchase promotions in low-income urban settings. PMID:19144859

Baltimore: A Multifaceted Approach to Developing Relationships

ERIC Educational Resources Information Center

Durham, Rachel E.; Shiller, Jessica; Connolly, Faith

2018-01-01

As community schools spread across the country, community school staff need effective approaches to engaging families and community-based partners. Such principles must be broadly applicable, given community schools' mandate to adapt to different local contexts. Based on recent research on Baltimore City's community schools, the authors highlight…

49 CFR 236.711 - Bond, rail joint.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Bond, rail joint. 236.711 Section 236.711 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Bond, rail joint. A metallic connection attached to adjoining rails to insure electrical conductivity. ...

49 CFR 236.752 - Joint, rail, insulated.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Joint, rail, insulated. 236.752 Section 236.752 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Joint, rail, insulated. A joint in which electrical insulation is provided between adjoining rails. ...

46 CFR 190.25-5 - Where rails required.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Where rails required. 190.25-5 Section 190.25-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Rails and Guards § 190.25-5 Where rails required. (a) All vessels shall have efficient guard rails...

Wheel/Rail Noise Control : A Critical Evaluation

DOT National Transportation Integrated Search

1981-01-01

Noise and vibration are the major sources of environmental impact from urban rail transit operations, and is a concern for both new and existing systems. One of the primary sources of noise on rail transit systems is wheel/rail noise, or, the noise e...

77 FR 48591 - State Rail Plan Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Plan Guidance AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Request for Public Comment on Proposed State Rail Plan Guidance. SUMMARY: FRA is publishing this notice to... plans. State rail plans are documents that are required under Section 303 of the Passenger Rail...

78 FR 57450 - State Rail Plan Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-18

... development of State rail plans, as appropriate. A commenter recommended that the FRA Regional Manager be... integration of State rail plan development within the statewide/nonmetropolitan transportation planning... Guidance is to describe the processes for the development, submission, and acceptance of State rail plans...

Apportionment of NMHC tailpipe vs non-tailpipe emissions in the Fort McHenry and Tuscarora mountain tunnels

NASA Astrophysics Data System (ADS)

Gertler, Alan W.; Fujita, Eric M.; Pierson, William R.; Wittorff, David N.

Measurements of on-road emissions of non-methane hydrocarbons (NMHCs) were made in the Fort McHenry Tunnel (Baltimore) and Tuscarora Mountain Tunnel (Pennsylvania) during the summer of 1992. Measurements were made during 11 one-hour periods in the Fort McHenry Tunnel and during 11 one-hour periods in the Tuscarora Mountain Tunnel. The observed light-duty fleets were quite new, with a median model year of approximately 1989. Speciated NMHC values were obtained from analyses of canister and Tenax samples, and light-duty speciated emission factors were calculated for the two tunnels. Fuel samples were collected in the area around the tunnels for use in constructing headspace and liquid fuel profiles for the chemical mass balance (CMB) receptor model. Profiles of tailpipe emissions were obtained from the literature. The CMB was used to apportion tailpipe from non-tailpipe emissions. Non-tailpipe sources were found to constitute approximately 15% of the light-duty NMHC emissions. The Federal automotive emission-rate models, MOBILE4.1 and MOBILE5, underpredicted non-tailpipe emissions, assigning approximately 9% and 6.5%, respectively, to non-tailpipe sources. In terms of total absolute emissions, MOBILE5 predictions were approximately a factor of 2 greater than MOBILE4.1 predictions. Both MOBILE4.1 and MOBILE5 underestimated the NMHC emissions in the Fort McHenry Tunnel and overpredicted the NMHC emissions in the Tuscarora Mountain Tunnel. In all cases, the MOBILE models underestimated the absolute value of the non-tailpipe emissions. The ability of the MOBILE models to account for observed emissions when conditions are more variable than those studies in the Fort McHenry and Tuscarora Mountain tunnels is still an open question.

Data Analysis and Instrumentation Requirements for Evaluating Rail Joints and Rail Fasteners in Urban Track

DOT National Transportation Integrated Search

1975-02-01

Rail fasteners for concrete ties and direct fixation and bolted rail joints have been identified as key components for improving track performance. However, the lack of statistical load data limits the development of improved design criteria and eval...

Urban Waters and the Patapsco Watershed/Baltimore Region (Maryland)

EPA Pesticide Factsheets

Patapsco Watershed / Baltimore Area of the Urban Waters Federal Partnership (UWFP) reconnects urban communities with their waterways by improving coordination among federal agencies and collaborating with community-led efforts.

The Achievement Checkup: Tracking the Post-Elementary Outcomes of Baltimore Need-Based Scholarship Students

ERIC Educational Resources Information Center

Schuh, Alex

2015-01-01

This study examined the high school experiences, graduation rates and post-secondary attendance rates of students who received need-based scholarships to attend private elementary schools from the Children's Scholarship Fund Baltimore (CSFB). CSFB provides funds to students from low-income families in the Baltimore area to attend the private or…

Investigating the relationship between weather and violence in Baltimore, Maryland, USA.

PubMed

Michel, Samuel J; Wang, Han; Selvarajah, Shalini; Canner, Joseph K; Murrill, Matthew; Chi, Albert; Efron, David T; Schneider, Eric B

2016-01-01

It is a common refrain at major urban trauma centers that caseloads increase in the heat of the summer. Several previous studies supported this assertion, finding trauma admissions and crime to correlate positively with temperature. We examined links between weather and violence in Baltimore, MD, through trauma presentation to Johns Hopkins Hospital and crime reports filed with the Baltimore Police Department. Crime data were obtained from the Baltimore City Police Department from January 1, 2008 to March 31, 2013. Trauma data were obtained from a prospectively collected registry of all trauma patients presenting to Johns Hopkins Hospital from January 1, 2007 to March 31, 2013. Weather data were obtained from the National Climatic Data Center. Correlation coefficients were calculated and negative binomial regression was used to elucidate the independent associations of weather and temporal variables with the trauma and crime data. When adjusting for temporal and meteorological factors, maximum daily temperature was positively associated with total trauma, intentional injury, and gunshot wounds presenting to Johns Hopkins Hospital along with total crime, violent crime, and homicides in Baltimore City. Associations of average wind speed, daily precipitation, and daily snowfall with trauma and crime were far weaker and, when significant, nearly universally negative. Maximum daily temperature is the most important weather factor associated with violence and trauma in our study period and location. Our findings suggest potential implications for hospital staffing to be explored in future studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

76 FR 16538 - Solid Waste Rail Transfer Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... circumstances. Upon receiving a land-use-exemption permit issued by the Board, a solid waste rail transfer... new application for a land-use-exemption permit if the rail line associated with the solid waste rail... transportation of solid waste by rail. (2) The Board will not grant a land-use-exemption permit for a solid waste...

49 CFR 1580.101 - Rail security coordinator.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the corporate level. (d) Each freight railroad carrier, rail hazardous materials shipper, and rail hazardous materials receiver required to have an RSC must provide to TSA the names, title, phone number(s... any of this information changes. (e) Each freight railroad carrier, rail hazardous materials shipper...

49 CFR 1580.101 - Rail security coordinator.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the corporate level. (d) Each freight railroad carrier, rail hazardous materials shipper, and rail hazardous materials receiver required to have an RSC must provide to TSA the names, title, phone number(s... any of this information changes. (e) Each freight railroad carrier, rail hazardous materials shipper...

49 CFR 1580.101 - Rail security coordinator.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the corporate level. (d) Each freight railroad carrier, rail hazardous materials shipper, and rail hazardous materials receiver required to have an RSC must provide to TSA the names, title, phone number(s... any of this information changes. (e) Each freight railroad carrier, rail hazardous materials shipper...

Rail commuter vehicle curving performance

DOT National Transportation Integrated Search

2002-04-01

This report presents results of a program to design and install a wayside wheel-rail force measurement system. The test site is capable of developing a set of measurements of lateral and vertical forces exerted between the wheel and the rail at caref...

National University Rail Transportation Center : Tier 1 : final report.

DOT National Transportation Integrated Search

2016-10-17

This project was a collaborative effort between Michigan Techs Rail Transportation Program (RTP), a member of the National University Rail Center (NURail) and the Michigan Dept of Transportation (MDOT), Office of Rail to advance rail transportatio...

76 FR 54153 - Proposed Amendment of Class D and Class E Airspace; Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...: This action proposes to amend Class D and Class E Airspace at Baltimore, MD, as the Martin Non... developed at Martin State Airport. This action would also update the geographic coordinates of the Baltimore... Federal Regulations (14 CFR) part 71 to amend Class D airspace and Class E surface airspace at Martin...

Keeping rail on track: preliminary findings on safety culture in Australian rail.

PubMed

Blewett, Verna; Rainbird, Sophia; Dorrian, Jill; Paterson, Jessica; Cattani, Marcus

2012-01-01

'Safety culture' is identified in the literature as a critical element of healthy and safe workplaces. How can rail organizations ensure that consistently effective work health and safety cultures are maintained across the diversity of their operations? This paper reports on research that is currently underway in the Australian rail industry aimed at producing a Model of Best Practice in Safety Culture for the industry. Located in rail organizations dedicated to the mining industry as well as urban rail and national freight operations, the research examines the constructs of organizational culture that impact on the development and maintenance of healthy and safe workplaces. The research uses a multi-method approach incorporating quantitative (survey) and qualitative (focus groups, interviews and document analysis) methods along with a participative process to identify interventions to improve the organization and develop plans for their implementation. The research uses as its analytical framework the 10 Platinum Rules, from the findings of earlier research in the New South Wales (Australia) mining industry, Digging Deeper. Data collection is underway at the time of writing and preliminary findings are presented at this stage. The research method may be adapted for use as a form of organizational review of safety and health in organizational culture.

Investigation of rail irregularity effects on wheel/rail dynamic force in slab track: Comparison of two and three dimensional models

NASA Astrophysics Data System (ADS)

Sadeghi, Javad; Khajehdezfuly, Amin; Esmaeili, Morteza; Poorveis, Davood

2016-07-01

Rail irregularity is one of the most significant load amplification factors in railway track systems. In this paper, the capability and effectiveness of the two main railway slab tracks modeling techniques in prediction of the influences of rail irregularities on the Wheel/Rail Dynamic Force (WRDF) were investigated. For this purpose, two 2D and 3D numerical models of vehicle/discontinuous slab track interaction were developed. The validation of the numerical models was made by comparing the results of the models with those obtained from comprehensive field tests carried out in this research. The effects of the harmonic and non-harmonic rail irregularities on the WRDF obtained from 3D and 2D models were investigated. The results indicate that the difference between WRDF obtained from 2D and 3D models is negligible when the irregularities on the right and left rails are the same. However, as the difference between irregularities of the right and left rails increases, the results obtained from 2D and 3D models are considerably different. The results indicate that 2D models have limitations in prediction of WRDF; that is, a 3D modeling technique is required to predict WRDF when there is uneven or non-harmonic irregularity with large amplitudes. The size and extent of the influences of rail irregularities on the wheel/rail forces were discussed leading to provide a better understanding of the rail-wheel contact behavior and the required techniques for predicting WRDF.

The NASA/Baltimore Applications Project (BAP). Computer aided dispatch and communications system for the Baltimore Fire Department: A case study of urban technology application

NASA Technical Reports Server (NTRS)

Levine, A. L.

1981-01-01

An engineer and a computer expert from Goddard Space Flight Center were assigned to provide technical assistance in the design and installation of a computer assisted system for dispatching and communicating with fire department personnel and equipment in Baltimore City. Primary contributions were in decision making and management processes. The project is analyzed from four perspectives: (1) fire service; (2) technology transfer; (3) public administration; and (5) innovation. The city benefitted substantially from the approach and competence of the NASA personnel. Given the proper conditions, there are distinct advantages in having a nearby Federal laboratory provide assistance to a city on a continuing basis, as is done in the Baltimore Applications Project.

29 CFR 1918.36 - Weather deck rails.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Weather deck rails. 1918.36 Section 1918.36 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.36 Weather deck rails. Removable weather deck rails shall be kept in place except when cargo operations require them to be removed...

29 CFR 1918.36 - Weather deck rails.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Weather deck rails. 1918.36 Section 1918.36 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.36 Weather deck rails. Removable weather deck rails shall be kept in place except when cargo operations require them to be removed...

29 CFR 1918.36 - Weather deck rails.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Weather deck rails. 1918.36 Section 1918.36 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.36 Weather deck rails. Removable weather deck rails shall be kept in place except when cargo operations require them to be removed...

29 CFR 1918.36 - Weather deck rails.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Weather deck rails. 1918.36 Section 1918.36 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.36 Weather deck rails. Removable weather deck rails shall be kept in place except when cargo operations require them to be removed...

29 CFR 1918.36 - Weather deck rails.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Weather deck rails. 1918.36 Section 1918.36 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.36 Weather deck rails. Removable weather deck rails shall be kept in place except when cargo operations require them to be removed...

Arc-driven rail gun research

NASA Technical Reports Server (NTRS)

Ray, P. K.

1984-01-01

The equations describing the performance of an inductively-driven rail gun are analyzed numerically. Friction between the projectile and rails is included through an empirical formulation. The equations are applied to the experiment of Rashleigh and Marshall to obtain an estimate of energy distribution in rail guns as a function of time. The effect of frictional heat dissipation on the bore of the gun is calculated. The mechanism of plasma and projectile acceleration in a dc rail gun is described from a microscopic point of view through the establishment of the Hall field. The plasma conductivity is shown to be a tensor indicating that there is a small component of current parallel to the direction of acceleration. The plasma characteristics are evaluated as a function of plasma mass through a simple fluid mechanical analysis of the plasma. By equating the energy dissipated in the plasma with the radiation heat loss, the properties of the plasma are determined.

Excitation of Surface Electromagnetic Waves on Railroad Rail

DOT National Transportation Integrated Search

1978-03-31

UMTA's Office of Rail Technology research programs aim to improve urban rail transportation systems safety. This rail-transit research study attempts to develop an onboard, separate and independent obstacle-detection system--Surface Electromagnetic W...

A School Voucher Program for Baltimore City

ERIC Educational Resources Information Center

Lips, Dan

2005-01-01

Baltimore City's public school system is in crisis. Academically, the school system fails on any number of measures. The city's graduation rate is barely above 50 percent and students continually lag well behind state averages on standardized tests. Adding to these problems is the school system's current fiscal crisis, created by years of fiscal…

Trailblazing Teacher Contract Agreement Adopted in Baltimore

ERIC Educational Resources Information Center

Education Digest: Essential Readings Condensed for Quick Review, 2011

2011-01-01

The Baltimore City Public Schools made national headlines late last year when the district adopted a new contract designed to take student learning and teacher professionalism to the next level. The three-year deal replaced conventional approaches to compensation--regular pay increases based on years in the system--with a new approach that gives…

78 FR 59316 - Rail Vehicles Access Advisory Committee Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-26

...-0001] RIN 3014-AA42 Rail Vehicles Access Advisory Committee Meetings AGENCY: Architectural and... Vehicles Access Advisory Committee (Committee) will hold its first meeting. We, the Architectural and... transportation vehicles that operate on fixed guideway systems (e.g., rapid rail, light rail, commuter rail...

Sexing California Clapper Rails using morphological measurements

USGS Publications Warehouse

Overton, Cory T.; Casazza, Michael L.; Takekawa, John Y.; Rohmer, Tobias M.

2009-01-01

California Clapper Rails (Rallus longirostris obsoletus) have monomorphic plumage, a trait that makes identification of sex difficult without extensive behavioral observation or genetic testing. Using 31 Clapper Rails (22 females, 9 males), caught in south San Francisco Bay, CA, and using easily measurable morphological characteristics, we developed a discriminant function to distinguish sex. We then validated this function on 33 additional rails. Seven morphological measurements were considered, resulting in three which were selected in the discriminate function: culmen length, tarsometatarsus length, and flat wing length. We had no classification errors for the development or testing datasets either with resubstitution or cross-validation procedures. Male California Clapper Rails were 6-22% larger than females for individual morphological traits, and the largest difference was in body mass.  Variables in our discriminant function closely match variables developed for sexing Clapper Rails of Gulf Coast populations. However, a universal discriminant function to sex all Clapper Rail subspecies is not likely because of large and inconsistent differences in morphological traits among subspecies. 

Proceedings : Seminar on the use of Composite Third Rail in Electrified Transit and Commuter Rail Systems

DOT National Transportation Integrated Search

1978-11-01

The seminar was organized at the request of UMTA to disseminate accurate information on, and experience with, composite (aluminum and steel) third, or contact rail, in wayside power distribution systems of electrified urban rail properties. The semin...

Bridge rail and approach railing for low-volume roads in Iowa : tech transfer summary, March 2010.

DOT National Transportation Integrated Search

2010-03-01

The primary objective of the research summarized below was to describe the state of the practice regarding the nations bridge rails and approach guardrails and to perform a statewide crash analysis involving bridge rails and approach guardrails on...

49 CFR 213.122 - Torch cut rail.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through 5...

49 CFR 213.122 - Torch cut rail.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through 5...

49 CFR 213.139 - Spring rail frogs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Spring rail frogs. 213.139 Section 213.139..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.139 Spring rail frogs. (a) The outer edge of a wheel tread shall not contact the gage side of a spring wing rail. (b) The toe of each...

49 CFR 213.139 - Spring rail frogs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Spring rail frogs. 213.139 Section 213.139..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.139 Spring rail frogs. (a) The outer edge of a wheel tread shall not contact the gage side of a spring wing rail. (b) The toe of each...

49 CFR 213.139 - Spring rail frogs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Spring rail frogs. 213.139 Section 213.139..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.139 Spring rail frogs. (a) The outer edge of a wheel tread shall not contact the gage side of a spring wing rail. (b) The toe of each...

49 CFR 213.139 - Spring rail frogs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Spring rail frogs. 213.139 Section 213.139..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.139 Spring rail frogs. (a) The outer edge of a wheel tread shall not contact the gage side of a spring wing rail. (b) The toe of each...

49 CFR 213.139 - Spring rail frogs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Spring rail frogs. 213.139 Section 213.139..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.139 Spring rail frogs. (a) The outer edge of a wheel tread shall not contact the gage side of a spring wing rail. (b) The toe of each...

Rail Integrity Experience on the Washington Metro System

DOT National Transportation Integrated Search

2016-04-12

The Washington Metropolitan Area Transit Authority (WMATA) provides passenger rail service to the nations capital. Although the rail system carries only passenger trains, the rail integrity issues that WMATA must manage are similar to those that f...

76 FR 50717 - Foreign-Trade Zone 74, Baltimore, MD; Application for Reorganization/Expansion Under Alternative...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... 28 (2.5 acres)-- McCormick & Company, Inc., 11102 McCormick Road, Hunt Valley (Baltimore County); Proposed Site 29 (17.6 acres)--McCormick & Company, Inc., 10901 Gilroy Road, Hunt Valley (Baltimore County); and, Proposed Site 30 (8.48 acres)--McCormick & Company, Inc., 4607 Appliance Drive, Belcamp (Harford...

Analysis of Rail Transit Vehicle Dynamic Curving Performance

DOT National Transportation Integrated Search

1984-06-01

An analytical model is developed for determining the dynamic curving performance of rail transit vehicles. The dynamic wheel/rail interaction forces, vehicle suspension and body motions and track displacement are computed, as well as wheel and rail w...

76 FR 77716 - Alternate Passenger Rail Service Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... program that permits a rail carrier or rail carriers that own infrastructure over which Amtrak operates... develops a pilot program that permits a rail carrier or rail carriers that own infrastructure over which... the infrastructure as described in Sec. 269.7 of this final rule. In addition, such information...

The geographic epidemiology of Mycobacterium tuberculosis disease in Baltimore, 1971-1995

NASA Astrophysics Data System (ADS)

Obasanjo, Olugbenga Olufemi

Given the reemergence of Tuberculosis (TB) in the United States (U.S.) in the 1980s and 1990s, several strategies have emerged to combat the disease. A successful tool has been Directly Observed Therapy (DOT). Chaulk, et al. showed that DOT was responsible for the maintaining the decline in TB rates in Baltimore through the corresponding period of an upswing in rates nationally. In this study, we measure the impact of DOT on the geographic pattern of TB in Baltimore. We used Geographical Information System (GIS) methods to compare the geographic patterns of TB in Baltimore before and after the introduction of DOT in the city. We identified both predictors of TB, and differences in geographic units in Baltimore over time. We measured the impact of the introduction of DOT and Rifampin on various treatment outcomes for TB at about the same time. Despite the drop in numbers of TB cases, the spatial distribution of cases generally remained unchanged until 1995. This was confirmed by the fact that similar predictors were identified in all of the years that were analyzed. However, higher proportions of TB cases were found among blacks and females in more recent years. Death rates have increased significantly while corresponding relapse rates and the mean length of therapy have declined significantly. Rifampin was associated with a longer length of therapy before DOT, but with a shorter duration of therapy following the introduction of DOT. In all of the years analyzed, losses to follow-up (LTFU) do not differ from those completing therapy and are not spatially clustered relative to those completing therapy. DOT has been effective in reducing the numbers of TB cases in Baltimore city-wide without an emphasis on so-called "high-risk" patients for LTFU. Thus, any declines in TB case rates are not due to a decline in a particular group or geographic sector of the city. Universal DOT is effective and does not cause a geographic clustering of difficult-to-reach patients. This

10. EXTERIOR VIEW OF STONE RETAINING WALL, AIRWAY, BALTIMORE FAN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. EXTERIOR VIEW OF STONE RETAINING WALL, AIRWAY, BALTIMORE FAN HOUSE AND HILLMAN FAN HOUSE LOOKING EAST The stone retaining wall encloses a pit which may have been the original site of the Hillman Fan House steam engine. The concrete foundations in the left foreground are more recent (c. 1930) additions which may be supports for a porch or stairway. The sloping airshaft, in the middle ground, connected the Baltimore shaft to the New Fan House (not shown) and Hillman Fan House in the background. The Hillman engine house is on the left. - Dorrance Colliery Fan Complex, South side of Susquehanna River at Route 115 & Riechard Street, Wilkes-Barre, Luzerne County, PA

Commuter rail seat testing and analysis.

DOT National Transportation Integrated Search

2002-07-31

The need to determine the structural integrity and passenger safety provided by existing commuter rail seats was identified by the Construction/Structural Subgroup of the American Public Transportation Association's (APTA) Passenger Rail Equipment Sa...

Analyses of rail vehicle dynamics in support of development of the wheel rail dynamics research facility

DOT National Transportation Integrated Search

1973-06-30

The development of experimental facilities for rail vehicle testing at the DOT High Speed Ground Test Center is being complemented by analytical studies. The purpose of this effort has been to gain insight into the dynamics of rail vehicles to guide ...

76 FR 37875 - Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... the Construction and Operation of the Baltimore Grand Prix AGENCIES: Federal Highway Administration... construction and operation of the Baltimore Grand Prix (BGP), which will use the streets of downtown Baltimore.... John C. Nicholas, Truck Size and Weight Team, Office of Operations, (202) 366-2317, Mr. Bill Winne...

49 CFR 212.231 - Highway-rail grade crossing inspector.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Highway-rail grade crossing inspector. 212.231... § 212.231 Highway-rail grade crossing inspector. (a) The highway-rail grade crossing inspector is required, at a minimum, to be able to conduct independent inspections of all types of highway-rail grade...

49 CFR 212.231 - Highway-rail grade crossing inspector.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Highway-rail grade crossing inspector. 212.231... § 212.231 Highway-rail grade crossing inspector. (a) The highway-rail grade crossing inspector is required, at a minimum, to be able to conduct independent inspections of all types of highway-rail grade...

49 CFR 212.231 - Highway-rail grade crossing inspector.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Highway-rail grade crossing inspector. 212.231... § 212.231 Highway-rail grade crossing inspector. (a) The highway-rail grade crossing inspector is required, at a minimum, to be able to conduct independent inspections of all types of highway-rail grade...

Modeling and imaging land-cover influences on air-temperature in and near Baltimore, MD

Treesearch

Gordon Heisler; Alexis Ellis; David J. Nowak; Ian Yesilonis

2015-01-01

Over the course of 1681 hours between May 5 and September 30, 2006, air temperatures measured at the 1.5-m height at seven sites in and near the city of Baltimore, MD were used to empirically model Δ Tˆ R-p , the difference in air temperature between a site in downtown Baltimore and the six other sites. Variables in the...

ADA final rule : rail system accessibility

DOT National Transportation Integrated Search

2011-07-31

This document evaluates the benefits, costs, and other impacts of a DOT rulemaking related to : the accessibility of commuter rail transportation and intercity passenger rail service. In keeping with Executive Order 12866, Executive Order 13563, and ...

75 FR 17462 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

... decision may be purchased by contacting the office of Public Assistance, Governmental Affairs, and...-2)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2010 Rail Cost...

Broken rail track detection using smart materials

NASA Astrophysics Data System (ADS)

Bouteiller, Fanny; Grisso, Benjamin L.; Peairs, Daniel M.; Inman, Daniel J.

2006-03-01

Rail lines are subject to many types of damage that, in the worst cases, can cause train derailments. The damage can arise from either manufacturing defects or external factors, possibly even terrorist acts to disrupt the civil infrastructure. Current rail inspection techniques require train traffic to be interrupted while workers and equipment move along the track. Moreover, a technician with rail testing experience is required to analyze the results. This paper focuses on simple proof of concept experiments to determine if impedance based structural health monitoring may be used to detect anomalies in rail tracks, and in particular broken rails. The technique applies a very low voltage (one volt) high frequency wave to a structure, measures its response and determines the location and extent of a rail break. The monitoring device is envisioned to run off of ambient vibration and thermal gradients provided by passing trains and daily thermal cycles, store the energy and utilize the stored energy periodically to inspect the track (according to the track usage schedule). If damage occurs or starts to occur, a warning signal would be transmitted to substation then broadcast to the appropriate operator listing the location and extent of the damage.

49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

Environmental impact assessment of rail infrastructure.

DOT National Transportation Integrated Search

2016-01-29

This project resulted in three products: a comprehensive "Sustainable Rail Checklist," a rail planning GIS database, and a web GIS tool that integrates sustainability metrics and facilitates a rapid assessment before a formal NEPA process is implemen...

Determination of Residual Stresses in Rails

DOT National Transportation Integrated Search

1983-05-01

A destructive sectioning technique for measuring the complete three-dimensional residual stresses in a rail cross section was developed. The technique was applied to four tangent rail specimens: two 136-pound specimens were taken from FAST (Facility ...

76 FR 59483 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... the decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2011 Rail Cost Adjustment...

Strategic Mobility 21: Rail Network Capacity Analysis

DTIC Science & Technology

2006-09-30

of commercial freight and passenger train movements per peak day on the rail main lines in the study area for Year 2000 (actual...levels in Year 2010 and beyond with transit times comparable to Year 2000, at least four main tracks on the south slope of Cajon Pass are required... study . Rail Network Capacity Analysis 1 1.0 INTRODUCTION This document contains the analysis of rail capacity

49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

Accountable Talk: "Real" Conversations in Baltimore City Schools

ERIC Educational Resources Information Center

Ahmann, Chloe

2017-01-01

This article examines the fundamental disconnect between discourses of accountability in education policy and their interpretation on the ground by parents. Based on data from two sites in Baltimore--district-led teacher training and a community facing school restructuring--I argue that both parents and education professionals consider…

Fatigue Crack Propagation in Rail Steels

DOT National Transportation Integrated Search

1977-06-01

In order to establish safe inspection periods of railroad rails, information on fatigue crack growth rates is required. These data should come from a sufficiently large sample of rails presently in service. The reported research consisted of the gene...

77 FR 37958 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-25

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2012 rail cost adjustment...

75 FR 35877 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... available on our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting...-3)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2010 rail cost...

75 FR 58019 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2010 Rail Cost Adjustment...

75 FR 80895 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2011 Rail Cost Adjustment...

76 FR 16037 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2011 Rail Cost Adjustment...

78 FR 37660 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board approves the third quarter 2013 Rail Cost Adjustment Factor...

76 FR 37191 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2011 Rail Cost Adjustment...

78 FR 59093 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2013 rail cost adjustment factor (RCAF) and cost index filed by the Association of American Railroads. The fourth quarter 2013 RCAF...

78 FR 17764 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2013 Rail Cost Adjustment...

Real-time and accurate rail wear measurement method and experimental analysis.

PubMed

Liu, Zhen; Li, Fengjiao; Huang, Bangkui; Zhang, Guangjun

2014-08-01

When a train is running on uneven or curved rails, it generates violent vibrations on the rails. As a result, the light plane of the single-line structured light vision sensor is not vertical, causing errors in rail wear measurements (referred to as vibration errors in this paper). To avoid vibration errors, a novel rail wear measurement method is introduced in this paper, which involves three main steps. First, a multi-line structured light vision sensor (which has at least two linear laser projectors) projects a stripe-shaped light onto the inside of the rail. Second, the central points of the light stripes in the image are extracted quickly, and the three-dimensional profile of the rail is obtained based on the mathematical model of the structured light vision sensor. Then, the obtained rail profile is transformed from the measurement coordinate frame (MCF) to the standard rail coordinate frame (RCF) by taking the three-dimensional profile of the measured rail waist as the datum. Finally, rail wear constraint points are adopted to simplify the location of the rail wear points, and the profile composed of the rail wear points are compared with the standard rail profile in RCF to determine the rail wear. Both real data experiments and simulation experiments show that the vibration errors can be eliminated when the proposed method is used.

Light Rail Transit Car Specification Guide

DOT National Transportation Integrated Search

1981-12-01

This Light Rail Transit Car Specification Guide is not a procurement document in itself. It is intended to be used as a guide by light rail transit operators and purchasers of such equipment in the preparation of technical specifications. Because of ...

78 FR 71724 - Rail Depreciation Studies

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board Rail Depreciation Studies AGENCY: Surface Transportation Board, DOT. ACTION: Notice of OMB Approval of Information Collection. SUMMARY... collection, Rail Depreciation Studies. See 78 FR 18676 (Mar. 27, 2013). This collection, codified at 49 CFR...

Factors affecting commuter rail energy efficiency.

DOT National Transportation Integrated Search

2016-02-17

The objective of this study is to develop a planninglevel model of commuter rail energy efficiency. The : environmental benefits of commuter rail are often cited as one of the key benefits and motivators for its rapid development as a public trans...

FY 1998 Proposed Rail Improvement Program

DOT National Transportation Integrated Search

1997-01-01

The Illinois Department of Transportation has, in the past, published its Rail program yearly, and its Rail plan as needs dictate. The department has combined : both documents into one. This new document, as with those Programs and Plans : that have ...

Making truck-rail intermodal more competitive.

DOT National Transportation Integrated Search

2010-09-01

Truck-rail intermodal freight is a technique that can gain much of the benefit of truck service and rail efficiency. Despite the attraction of the mode : choice and its benefit in reducing emissions and highway congestion, the mode typically is used ...

76 FR 4284 - Grant of Authority for Subzone Status; Tulkoff Food Products, Inc. (Dehydrated Garlic), Baltimore...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Status; Tulkoff Food Products, Inc. (Dehydrated Garlic), Baltimore, MD Pursuant to its authority under..., has made application to the Board for authority to establish a special-purpose subzone at the garlic... garlic products at the Tulkoff Food Products, Inc., facility located in Baltimore, Maryland (Subzone 74C...

76 FR 80448 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2012 rail cost adjustment factor (RCAF... decision, which is available on our Web site, http://www.stb.dot.gov . Copies of the decision may be...

77 FR 58910 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2012 rail cost adjustment factor (RCAF...

77 FR 69769 - Solid Waste Rail Transfer Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

.... SUMMARY: These final rules govern land-use-exemption permits for solid waste rail transfer facilities. The... ``land-use-exemption permits'' in certain circumstances. Under the CRA, a solid waste rail transfer... grants a land-use-exemption permit for a solid waste rail transfer facility, such permit would only...

Analysis of minimum rail size in heavy axle load environment

DOT National Transportation Integrated Search

2013-04-15

The effects of increasing axle loads on rail integrity are examined in this paper. In the present context, rail integrity refers to the prevention and control of rail failures. Rail failures usually occur because cracks or defects develop and grow fr...

Bailout Deal Reached for Baltimore Schools: State, City, and Foundation Offer Loans to Ease Crisis

ERIC Educational Resources Information Center

Gehring, John

2004-01-01

Top state and local leaders in Maryland announced a plan last February to lend Baltimore $42 million to help the city's financially troubled school system. The money was used by Baltimore school leaders to address what they called a cash-flow emergency for that school year. Money helped pay employees' salaries for the rest of that year, and helped…

The Baltimore Youth Ammunition Initiative: a model application of local public health authority in preventing gun violence.

PubMed

Lewin, Nancy L; Vernick, Jon S; Beilenson, Peter L; Mair, Julie S; Lindamood, Melisa M; Teret, Stephen P; Webster, Daniel W

2005-05-01

In 2002, the Baltimore City Health Department, in collaboration with the Baltimore Police Department and the Johns Hopkins Center for Gun Policy and Research, launched the Youth Ammunition Initiative. The initiative addressed Baltimore's problem of youth gun violence by targeting illegal firearm ammunition sales to the city's young people. The initiative included undercover "sting" investigations of local businesses and issuance of health department violation and abatement notices. Intermediate results included the passage of 2 Baltimore city council ordinances regulating ammunition sales and reducing the number of outlets eligible to sell ammunition. Although it is too early to assess effects on violent crime, the intervention could theoretically reduce youth violence by interrupting one source of ammunition to youths. More important, the initiative can serve as a policy model for health commissioners seeking to become more active in gun violence prevention efforts.

Detection method based on Kalman filter for high speed rail defect AE signal on wheel-rail rolling rig

NASA Astrophysics Data System (ADS)

Hao, Qiushi; Shen, Yi; Wang, Yan; Zhang, Xin

2018-01-01

Nondestructive test (NDT) of rails has been carried out intermittently in traditional approaches, which highly restricts the detection efficiency under rapid development of high speed railway nowadays. It is necessary to put forward a dynamic rail defect detection method for rail health monitoring. Acoustic emission (AE) as a practical real-time detection technology takes advantage of dynamic AE signal emitted from plastic deformation of material. Detection capacities of AE on rail defects have been verified due to its sensitivity and dynamic merits. Whereas the application under normal train service circumstance has been impeded by synchronous background noises, which are directly linked to the wheel speed. In this paper, surveys on a wheel-rail rolling rig are performed to investigate defect AE signals with varying speed. A dynamic denoising method based on Kalman filter is proposed and its detection effectiveness and flexibility are demonstrated by theory and computational results. Moreover, after comparative analysis of modelling precision at different speeds, it is predicted that the method is also applicable for high speed condition beyond experiments.

Lead residues in sora rails from Maryland

USGS Publications Warehouse

Stendell, Rey C.; Artmann, Joseph W.; Martin, Elwood

1980-01-01

During September and October, mi- grating sora rails (Porzana carolina) use tidal marshes of the Patuxent River in Maryland, where they have been hunted for many years. Spent shot accumulates in the marsh during the rail hunting sea- son, and some shot is ingested by the birds. Twelve percent of gizzards from rails collected at the marsh during 1965- 73 contained lead shot (Artmann and Martin 1975). Effects of ingested lead on waterfowl are well documented (Bellrose 1959), although effects on other species of wild birds are not well known. In this note we report lead residues in liver and bone tissues of sora rails collected at the Patuxent River marshes in 1976.

Comprehensive social equity study for the Baltimore Urban League.

DOT National Transportation Integrated Search

2003-04-01

This report was commissioned by the Greater Baltimore Urban League (GBUL) to the : Graduate Program in City and Regional Planning and the National Transportation Center : at Morgan State University. The purpose of the report is to answer two broad re...

a Method for the Positioning and Orientation of Rail-Bound Vehicles in Gnss-Free Environments

NASA Astrophysics Data System (ADS)

Hung, R.; King, B. A.; Chen, W.

2016-06-01

Mobile Mapping System (MMS) are increasingly applied for spatial data collection to support different fields because of their efficiencies and the levels of detail they can provide. The Position and Orientation System (POS), which is conventionally employed for locating and orienting MMS, allows direct georeferencing of spatial data in real-time. Since the performance of a POS depends on both the Inertial Navigation System (INS) and the Global Navigation Satellite System (GNSS), poor GNSS conditions, such as in long tunnels and underground, introduce the necessity for post-processing. In above-ground railways, mobile mapping technology is employed with high performance sensors for finite usage, which has considerable potential for enhancing railway safety and management in real-time. In contrast, underground railways present a challenge for a conventional POS thus alternative configurations are necessary to maintain data accuracy and alleviate the need for post-processing. This paper introduces a method of rail-bound navigation to replace the role of GNSS for railway applications. The proposed method integrates INS and track alignment data for environment-independent navigation and reduces the demand of post-processing. The principle of rail-bound navigation is presented and its performance is verified by an experiment using a consumer-grade Inertial Measurement Unit (IMU) and a small-scale railway model. The method produced a substantial improvement in position and orientation for a poorly initialised system in centimetre positional accuracy. The potential improvements indicated by, and limitations of rail-bound navigation are also considered for further development in existing railway systems.

Rail and Motor Outloading Capability Study. Fort Devens, Massachusetts,

DTIC Science & Technology

1980-03-01

AD-AI 765 MILITARY TRAFFIC MANAGEMENT COMMAND TRANSPORTATION EN-ETC FIO 15/5 RAIL AND MOTOR OUTLOADING CAPABILITY STUDY. FORT DEVENS . MASSAC-ETC(U...REPORT TE 79-4-54 RAIL AND MOTOR OUTLOADING CAPABILITY STUDY FORT DEVENS , MASSACHUSETTS Accession Far DTIC TAB March 1980 _stribution/ Av_alability...INTRODUCTION 6.. . .. . . II. ANALYSIS OF FORT DEVENS ’ RAIL OUTLOADING FACILITIES ... . . .. . .9 A. General .9.. B. Rail Facility Description

Rail accelerator technology and applications

NASA Technical Reports Server (NTRS)

Zana, L. M.; Kerslake, W. R.

1985-01-01

Rail accelerators offer a viable means of launching ton-size payloads from the Earth's surface to space. The results of two mission studies which indicate that an Earth-to-Space Rail Launcher (ESRL) system is not only technically feasible but also economically beneficial, particularly when large amounts of bulk cago are to be delivered to space are given. An in-house experimental program at the Lewis Research Center (LeRC) was conducted in parallel with the mission studies with the objective of examining technical feasibility issues. A 1 m long - 12.5 by 12.5 mm bore rail accelerator as designed with clear polycarbonate sidewalls to visually observe the plasma armature acceleration. The general character of plasma/projectile dynamics is described for a typical test firing.

Ceramic Rail-Race Ball Bearings

NASA Technical Reports Server (NTRS)

Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

2010-01-01

Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

Neurology Falls. Patient Falls Risk Assessment, Neurology Clinic, Johns Hopkins Hospital, Baltimore, MD

DTIC Science & Technology

2009-07-06

currently valid ()MB control number. PLEASE DO NOT RETURN YOf IR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 21 JUL 2008 2. REPORT TYPE Final...Hospital, Baltimore, MD 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) LT John M Gardner, MSC, USN 5d. PROJECT...NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Johns Hopkins Hospital, Baltimore, MD Residency Site

Chicago-St. Louis high speed rail plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stead, M.E.

1994-12-31

The Illinois Department of Transportation (IDOT), in cooperation with Amtrak, undertook the Chicago-St. Louis High Speed Rail Financial and Implementation Plan study in order to develop a realistic and achievable blueprint for implementation of high speed rail in the Chicago-St. Louis corridor. This report presents a summary of the Price Waterhouse Project Team`s analysis and the Financial and Implementation Plan for implementing high speed rail service in the Chicago-St. Louis corridor.

Potential scenarios of concern for high speed rail operations

DOT National Transportation Integrated Search

2011-03-16

Currently, multiple operating authorities are proposing the : introduction of high-speed rail service in the United States. : While high-speed rail service shares a number of basic : principles with conventional-speed rail service, the operational : ...

Civic Engagement and Gentrification Issues in Metropolitan Baltimore

ERIC Educational Resources Information Center

Durington, Matthew; Maddox, Camee; Ruhf, Adrienne; Gass, Shana; Schwermer, Justin

2009-01-01

Since the fall of 2006 a number of Towson University students concentrating in the discipline of anthropology have been part of a civic engagement and service-learning project focusing on an historic African-American community in Baltimore. While the focus of the research project concentrates on the processes of gentrification, individual student…

Perspectives on obesity and its treatment: health care providers and the general public in rural West Virginia and urban Baltimore.

PubMed

Menez, Steven; Cheskin, Lawrence; Geller, Gail

2013-12-01

To determine and compare the perspectives of the general public and health care providers (HCPs) on obesity and its treatment in rural West Virginia (WV) and Baltimore, MD. Surveys were completed in both locations by the general public (WV: n = 200; Baltimore: n = 171) and HCPs (WV: n = 25; Baltimore: n = 15). BMI (body mass index) ≥ 30 (WV: n = 94; Baltimore: n = 58) was associated with a stronger belief in the heritability of obesity and with the ability to control obesity by controlling food cost, compared with those with normal BMI (WV: n = 42; Baltimore: n = 57). Those with a high school education (WV: n = 112; Baltimore: n = 113) were less likely to agree that obesity is a problem in the community and that proper diet and exercise are realistic expectations, compared with those with at least some higher education. Perspectives of HCPs differed significantly from the general public in both locations. Many differences in perspective on obesity exist between WV and Baltimore, within both populations, and between HCPs and the general public in both settings. A better understanding of patient views is important for effective obesity management. HCPs must consider each patient's level of understanding when discussing management and consequences of obesity. More time spent with patients who have less insight into their obesity may improve patient adherence with treatment and overall patient outcomes.

Questions of scientific responsibility: the Baltimore case.

PubMed

Lang, Serge

1993-01-01

A number of cases of questionable behavior in science have been extensively reported in the media during the last two or three years. What standards are upheld by the scientific community affect the community internally, and also affect its relations with society at large, including Congress. Here I wish to address questions of scientific responsibility, using the Baltimore case as a concrete instance where they came up. The first part containing historical background is necessary to provide readers with documentation so that they can have some factual bases on which to evaluate respective positions and my conclusions that follow -- based on further but more succinctly summarized documentation. I have reproduced many quotes because I firmly believe people are entitled to be represented by their own wording. Conversely, I hold people accountable for their official positions. Some of these are reproduced in footnotes, and some longer ones are reproduced in appendices. I also do not ask to be trusted. By providing numerous references, I hope that readers who find my documentation insufficient can follow up by looking up these references.... The article is in six parts: Part I. Historical Background. This part gives mostly a historical background of the early phases of the Baltimore case. Part II. The First Issue of Responsibility. This part presents a discussion of certain scientific responsibilities based on that background, specifically: the responsibility of answering questions about one's work, and the responsibility whether to submit to authority. Part III. The NIH Investigations. This part summarizes the two NIH investigations. Part IV. The Dingell Subcommittee. This part deals with the responsibilities of a Congressional Committee vis-à-vis science. Part V. Further Issues of Responsibility. This part goes into an open ended discussion of many issues of responsibility facing scientists, vis-à-vis themselves and vis-à-vis society at large, including Congress

Linear friction welding for constructing and repairing rail for high speed and intercity passenger service rail : final report.

DOT National Transportation Integrated Search

2016-08-01

This project developed a solid-state welding process based on linear friction welding (LFW) technology. While resistance flash welding or : thermite techniques are tried and true methods for joining rails and performing partial rail replacement repai...

Modelling of dynamic contact length in rail grinding process

NASA Astrophysics Data System (ADS)

Zhi, Shaodan; Li, Jianyong; Zarembski, A. M.

2014-09-01

Rails endure frequent dynamic loads from the passing trains for supporting trains and guiding wheels. The accumulated stress concentrations will cause the plastic deformation of rail towards generating corrugations, contact fatigue cracks and also other defects, resulting in more dangerous status even the derailment risks. So the rail grinding technology has been invented with rotating grinding stones pressed on the rail with defects removal. Such rail grinding works are directed by experiences rather than scientifically guidance, lacking of flexible and scientific operating methods. With grinding control unit holding the grinding stones, the rail grinding process has the characteristics not only the surface grinding but also the running railway vehicles. First of all, it's important to analyze the contact length between the grinding stone and the rail, because the contact length is a critical parameter to measure the grinding capabilities of stones. Moreover, it's needed to build up models of railway vehicle unit bonded with the grinding stone to represent the rail grinding car. Therefore the theoretical model for contact length is developed based on the geometrical analysis. And the calculating models are improved considering the grinding car's dynamic behaviors during the grinding process. Eventually, results are obtained based on the models by taking both the operation parameters and the structure parameters into the calculation, which are suitable for revealing the process of rail grinding by combining the grinding mechanism and the railway vehicle systems.

Assessment of rail long-pitch corrugation

NASA Astrophysics Data System (ADS)

Valehrach, Jan; Guziur, Petr; Riha, Tomas; Plasek, Otto

2017-09-01

The paper focuses on defects of the running surface of the rail, namely the rail corrugation defect and specifically long-pitch corrugation in curves of small radii. These defects cause a shorter life of the rails, greater maintenance costs and increase the noise and vibration pollution. Therefore, it is very important to understand the formation and development of the imperfection of the rails. In the paper, various sections of railway tracks in the Czech Republic are listed, each of them completed with comparison of defect development, the particular track superstructure, rolling stock, axle load, traffic load etc. Based on performed measurements, defect development has been proved as different on sections with similar (or even same) parameters. The paper assumes that a train velocity is the significant circumstance for defect development rates. Assessment of track section with under sleeper pads, which are expected to be the one of the possible ways to suppress the corrugation defect development, is included in evaluation.

75 FR 1705 - Drawbridge Operation Regulations; Curtis Creek, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-13

..., mile 0.9, at Baltimore, MD. The deviation is necessary to facilitate mechanical repairs to the bridge... facilitate mechanical repairs. The I695 Bridge, a double-leaf bascule drawbridge, has a vertical clearance in...

Educator's Guide to the National Aquarium in Baltimore.

ERIC Educational Resources Information Center

Chase, Valerie; And Others

This guide is designed for educators planning trips to the National Aquarium in Baltimore. The first part provides tips on organizing a school visit and information on the aquarium lobby and exhibits. These exhibits are: (1) Maryland: Mountains to the Sea; (2) Surviving through Adaptation; (3) North Atlantic to the Pacific; (4) South American Rain…

Building Teacher Quality in Baltimore City Public Schools

ERIC Educational Resources Information Center

National Council on Teacher Quality, 2010

2010-01-01

At the request of the Education Reform Project of the American Civil Liberties Union of Maryland, the National Council on Teacher Quality undertook an analysis of the teacher policies in the Baltimore City Public Schools. Its analysis looks at the teachers' contract, school board rules and state laws. It also collected personnel data from the…

Energy partitioning in an inductively driven rail gun

NASA Technical Reports Server (NTRS)

Sen, K. K.; Ray, P. K.

1984-01-01

The equations describing the performance of an inductively driven rail are analyzed numerically. Friction between the projectile and rails is included through an empirical formulation. The equations are applied to the experiment of Rashleigh and Marshall to obtain an estimate of energy distribution in rail guns as a function of time. It is found that only 15 percent of energy delivered by the inductor to the gun is transformed into the kinetic energy of the projectile. This study provides an insight into the nature of nonlinear coupling involved in the electromechanical interactions in a rail gun.

A comparative study of rail-pedestrian trespassing crash injury severity between highway-rail grade crossings and non-crossings.

PubMed

Zhang, Meng; Khattak, Asad J; Liu, Jun; Clarke, David

2018-08-01

Rail-trespassing crashes that involve various levels of injuries to pedestrians are under-researched. Rail trespassing could occur at crossings where pedestrians are present at the wrong time and at non-crossings where pedestrians are not legally allowed to be present. This paper presents a comparative study examining rail-trespassing crashes in two contexts: highway-rail grade crossings vs. non-crossings. How pre-crash trespassing behaviors and other factors (e.g., crash time, locations, and socio-demographics) differ between grade crossings and non-crossings are explored. The analysis relies on a ten-year (2006-2015) database of rail-pedestrian trespassing crash records extracted from a Federal Railroad Administration safety database. Of these 7157 rail-pedestrian trespassing crashes, 6236 (87%) occurred at non-crossings, while 921 (13%) occurred at grade crossings. About 60% of the crashes were fatal at both crossings and non-crossings. The most prevalent pre-crash trespassing behavior is running or walking, 63% at grade crossings and 44% at non-crossings. Lying or sleeping account for 29% of non-crossing crashes, whereas they are 3.6% at grade crossings. A unique aspect of the study is that a diverse set of variables based on geographic variations across counties along with crash or injury data are modeled. Considering the data structure and heterogeneity that may exist due to unobserved factors, the multilevel mixed-effect ordered logistic regressions models are estimated. The results show that the correlates of injury severity differ across highway-rail grade crossings and non-crossings. For example, lying or sleeping on or near tracks contributed to higher chances of fatal injury in both contexts, however, they were relatively more injurious at grade crossings. The analytical results can provide guidance on railway safety improvement plans. Copyright © 2018. Published by Elsevier Ltd.

The physics of wheel-rail stability

NASA Astrophysics Data System (ADS)

Tan, B. T. G.

2018-05-01

This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure.

49 CFR 213.351 - Rail joints.

Code of Federal Regulations, 2011 CFR

2011-10-01

... replaced. (d) Each rail shall be bolted with at least two bolts at each joint. (e) Each joint bar shall be... in this subpart. (f) No rail shall have a bolt hole which is torch cut or burned. (g) No joint bar shall be reconfigured by torch cutting. ...

The Physics of Wheel-Rail Stability

ERIC Educational Resources Information Center

Tan, B. T. G.

2018-01-01

This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure

49 CFR 174.59 - Marking and placarding of rail cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

49 CFR 174.59 - Marking and placarding of rail cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

49 CFR 174.59 - Marking and placarding of rail cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

49 CFR 174.59 - Marking and placarding of rail cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

49 CFR 174.59 - Marking and placarding of rail cars.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

14. Photocopy of photograph (Original in the collection of Baltimore ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Photocopy of photograph (Original in the collection of Baltimore and Ohio Railroad) Unknown, Photographer, November 1956 PERSPECTIVE VIEW OF EAST (FRONT) AND SOUTH SIDE - John Brown Fort, Shenandoah Street, Harpers Ferry, Jefferson County, WV

77 FR 63290 - Foreign-Trade Zone 74-Baltimore, MD, Authorization of Production Activity, J.D. Neuhaus LP...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-47-2012] Foreign-Trade Zone 74--Baltimore, MD, Authorization of Production Activity, J.D. Neuhaus LP, (Overhead Lifting Equipment Production), Sparks, MD On June 13, 2012, the Baltimore Development Corporation, grantee of FTZ 74, submitted a notification of...

Finding Opportunity: Darcy Cahill--Baltimore County Public Library

ERIC Educational Resources Information Center

Library Journal, 2004

2004-01-01

Three months after Darcy Cahill was promoted to head the Randallstown branch of the Baltimore County Public Library (BCPL), at 6 a.m. on a Saturday morning, the branch suffered a devastating fire. When firefighters finally contained the blaze, she was shocked to see the building drenched and in disarray. This article gives a detailed description…

A Big Data Analysis Approach for Rail Failure Risk Assessment.

PubMed

Jamshidi, Ali; Faghih-Roohi, Shahrzad; Hajizadeh, Siamak; Núñez, Alfredo; Babuska, Robert; Dollevoet, Rolf; Li, Zili; De Schutter, Bart

2017-08-01

Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats that are detected automatically among the huge number of records from video cameras. We propose an image processing approach for automatic detection of squats, especially severe types that are prone to rail breaks. We measure the visual length of the squats and use them to model the failure risk. For the assessment of the rail failure risk, we estimate the probability of rail failure based on the growth of squats. Moreover, we perform severity and crack growth analyses to consider the impact of rail traffic loads on defects in three different growth scenarios. The failure risk estimations are provided for several samples of squats with different crack growth lengths on a busy rail track of the Dutch railway network. The results illustrate the practicality and efficiency of the proposed approach. © 2017 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

Methods for Joining of Rails : Survey Report

DOT National Transportation Integrated Search

1977-07-01

The performance of track structures depends greatly on the integrity of the connections between rail sections. Because the majority of service and detected rail failures occur at joints, particularly conventional bolted joints, this survey was conduc...

Fatigue Crack Growth Properties of Rail Steels

DOT National Transportation Integrated Search

1981-10-01

Fatigue crack propagation properties of rail steels were determined experimentally. The investigation covered 66 rail steels. The effects of the following parameters were studied: stress ratio (ratio of minimum to maximum stress in a cycle), frequenc...

Electric rail gun projectile acceleration to high velocity

NASA Technical Reports Server (NTRS)

Bauer, D. P.; Mccormick, T. J.; Barber, J. P.

1982-01-01

Electric rail accelerators are being investigated for application in electric propulsion systems. Several electric propulsion applications require that the rail accelerator be capable of launching projectiles at velocities above 10 km/s. An experimental program was conducted to develop rail accelerator technology for high velocity projectile launch. Several 6 mm bore, 3 m long rail accelerators were fabricated. Projectiles with a mass of 0.2 g were accelerated by plasmas, carrying currents up to 150 kA. Experimental design and results are described. Results indicate that the accelerator performed as predicted for a fraction of the total projectile acceleration. The disparity between predicted and measured results are discussed.

Housing authority of Baltimore City-Public Housing Energy Workshop

NASA Technical Reports Server (NTRS)

Golden, T. S. (Editor)

1980-01-01

The NASA/Baltimore Applications Project operating at the Goddard Space Flight Center was called upon by the Housing Authority of Baltimore City to consider the problems of providing low cost public housing because of increased energy costs and suggest methods for correction and alleviation. The first step chosen was to elicit as many different options for solution as possible through means of a Public Housing Energy Workshop held in Easton, Md. in September 1980. A final role for the Workshop was a listing and qualifying of each alternative as to its suitability and cost. Specific areas were examined by three panels: (1) Systems, (2) Conservation and Motivation, and (3) Fuels. Each panel was made up of persons from differing but appropriate backgrounds; membership was not restricted to housing people alone. A summary of their deliberations is given - it will be used as a stepping stone to further selection and implementation of alternatives.

Flows of Selected Hazardous Materials by Rail

DOT National Transportation Integrated Search

1990-03-01

This report reviews the hazardous materials rail traffic of 33 selected hazardous materials commoditites or commodity groups in 1986, a relatively typical recent year. The flow of the selected commodities by rail are characterized and their geographi...

Improvement in Magnetic Techniques for Rail Inspection

DOT National Transportation Integrated Search

1981-06-01

Current inspection of rail for internal defects is carried out by ultrasonic and/or magnetic technique for inspecting rail for internal flaws. The major emphasis was placed on improving the speed and detectability of current techniques. Experimental ...

Improving fatigue performance of rail thermite welds

NASA Astrophysics Data System (ADS)

Jezzini-Aouad, M.; Flahaut, P.; Hariri, S.; Winiar, L.

2010-06-01

Rail transport development offers economic and ecological interests. Nevertheless, it requires heavy investments in rolling material and infrastructure. To be competitive, this transportation means must rely on safe and reliable infrastructure, which requires optimization of all implemented techniques and structure. Rail thermite (or aluminothermic) welding is widely used within the railway industry for in-track welding during re-rail and defect replacement. The process provides numerous advantages against other welding technology commonly used. Obviously, future demands on train traffic are heavier axle loads, higher train speeds and increased traffic density. Thus, a new enhanced weld should be developed to prevent accidents due to fracture of welds and to lower maintenance costs. In order to improve such assembly process, a detailed metallurgical study coupled to a thermomechanical modelling of the phenomena involved in the thermite welding process is carried out. Obtained data enables us to develop a new improved thermite weld (type A). This joint is made by modifying the routinely specified procedure (type B) used in a railway rail by a standard gap alumino-thermic weld. Joints of type A and B are tested and compared. Based on experimental temperature measurements, a finite element analysis is used to calculate the thermal residual stresses induced. In the vicinity of the weld, the residual stress patterns depend on the thermal conditions during welding as it also shown by litterature [1, 2]. In parallel, X-Ray diffraction has been used to map the residual stress field that is generated in welded rail of types A and B. Their effect on fatigue crack growth in rail welds is studied. An experimental study based on fatigue tests of rails welded by conventional and improved processes adjudicates on the new advances and results will be shown.

Segmented rail linear induction motor

DOEpatents

Cowan, M. Jr.; Marder, B.M.

1996-09-03

A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces. 6 figs.

Segmented rail linear induction motor

DOEpatents

Cowan, Jr., Maynard; Marder, Barry M.

1996-01-01

A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces.

Fatigue Crack Initiation Properties of Rail Steels

DOT National Transportation Integrated Search

1982-01-01

Fatigue crack initiation properties of rail-steels were determined experimentally. One new and four used rail steels were investigated. The effects of the following parameters were studied: stress ratio (ratio of minimum to maximum stress in a cycle)...

Controls to Eliminate Broken Rails in Service

DOT National Transportation Integrated Search

2016-04-12

Broken rails in freight and passenger revenue service occur : due to single, or combinations of, faults or failures of various : kinds. These may occur due to limitations inherent in the rail : defect inspection process, track maintenance and renewal...

The literature of the California black rail

USGS Publications Warehouse

Wilbur, Sanford R.

1974-01-01

Few birds have remained so little known as the California black rail (Laterallus jamaicensis coturniculus). Although first collected in 1859 or before and reported in 1874 (Ridgway 1874), its life history, distribution, and status have remained so obscure that even a sight record of the bird is deemed worthy of a report in some ornithological publications. Because degradation and loss of freshwater and saltwater marshlands in California may be detrimentally affecting the black rail, both the U.S. Bureau of Sport Fisheries and Wildlife (1973) and the California Department of Fish and Game (1972) have classified it as rare and worthy of further study. The 84 papers and notes both summarized in this report and included in its bibliography include essentially all that is currently known about the California black rail. Only 11 of these papers consider the life history of this rail in any detail. The rest are distribution notes and some of the more important papers on the closely related eastern black rail (L. j. jamaicensis). The latter are included for comparative purposes, or because they may lend clues to currently unknown facets of the life history of the western race.

Control Measurements of Crane Rails Performed by Terrestrial Laser Scanning

PubMed Central

Kregar, Klemen; Možina, Jan; Ambrožič, Tomaž; Kogoj, Dušan; Marjetič, Aleš; Štebe, Gašper; Savšek, Simona

2017-01-01

This article presents a method for measuring the geometry of crane rails with terrestrial laser scanning (TLS). Two sets of crane rails were divided into segments, their planes were adjusted, and the characteristic rail lines were defined. We used their profiles to define the positional and altitude deviations of the rails, the span and height difference between the two rails, and we also verified that they complied with the Eurocode 3 standard. We tested the method on crane rails at the hydroelectric power plant in Krško and the thermal power plant in Brestanica. We used two scanning techniques: “pure” TLS (Riegel VZ-400) and “hybrid” TLS (Leica MS50) scanning. This article’s original contribution lies in the detailed presentation of the computations used to define the characteristic lines of the rails without using the numeric procedures from existing software packages. We also analysed the influence of segment length and point density on the rail geometry results, and compared the two laser scanning techniques. We also compared the results obtained by terrestrial laser scanning with the results obtained from the classic polar method, which served as a reference point for its precision. PMID:28726755

Rail inspection system based on iGPS

NASA Astrophysics Data System (ADS)

Fu, Xiaoyan; Wang, Mulan; Wen, Xiuping

2018-05-01

Track parameters include gauge, super elevation, cross level and so on, which could be calculated through the three-dimensional coordinates of the track. The rail inspection system based on iGPS (indoor/infrared GPS) was composed of base station, receiver, rail inspection frame, wireless communication unit, display and control unit and data processing unit. With the continuous movement of the inspection frame, the system could accurately inspect the coordinates of rail; realize the intelligent detection and precision measurement. According to principle of angle intersection measurement, the inspection model was structured, and detection process was given.

Crashworthiness requirements for commuter rail passenger seats

DOT National Transportation Integrated Search

2005-11-05

Occupant experiments using instrumented crash test dummies seated in commuter rail seats have been conducted on board full-scale impact tests of rail cars. The tests have been conducted using both conventional cars and cars modified to incorporate cr...

49 CFR 1580.201 - Rail security coordinator.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Rail security coordinator. 1580.201 Section 1580.201 Transportation Other Regulations Relating to Transportation (Continued) TRANSPORTATION SECURITY ADMINISTRATION, DEPARTMENT OF HOMELAND SECURITY MARITIME AND LAND TRANSPORTATION SECURITY RAIL TRANSPORTATION...

49 CFR 1580.201 - Rail security coordinator.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Rail security coordinator. 1580.201 Section 1580.201 Transportation Other Regulations Relating to Transportation (Continued) TRANSPORTATION SECURITY ADMINISTRATION, DEPARTMENT OF HOMELAND SECURITY MARITIME AND LAND TRANSPORTATION SECURITY RAIL TRANSPORTATION...

Relationships between pediatric asthma and socioeconomic/urban variables in Baltimore, Maryland

NASA Technical Reports Server (NTRS)

Kimes, Daniel; Ullah, Asad; Levine, Elissa; Nelson, Ross; Timmins, Sidey; Weiss, Sheila; Bollinger, Mary E.; Blaisdell, Carol

2004-01-01

Spatial relationships between clinical data for pediatric asthmatics (hospital and emergency department utilization rates), and socioeconomic and urban characteristics in Baltimore City were analyzed with the aim of identifying factors that contribute to increased asthma rates. Socioeconomic variables and urban characteristics derived from satellite data explained 95% of the spatial variation in hospital rates. The proportion of families headed by a single female was the most important variable accounting for 89% of the spatial variation. Evidence suggests that the high rates of hospital admissions and emergency department (ED) visits may partially be due to the difficulty of single parents with limited resources managing their child's asthma condition properly. This knowledge can be used for education towards mitigating ED and hospital events in Baltimore City.

Simulation of rail yard emissions transport to the near-source environment

EPA Science Inventory

Rail yards are critical nodes in the freight transportation network and locations of clustered emission sources. When people reside in close proximity to an active rail yard, the near-field effect of rail yard emissions is of concern. Field characterization of near-rail yard ai...

The status of the light-footed clapper rail

USGS Publications Warehouse

Wilbur, S.R.

1974-01-01

Only 12 California marsh areas are presently believed to be inhabited by the Light-footed Clapper Rail, and eight of these appear to support only 5-15 birds apiece. Tentative estimates for the other four are: Anaheim Bay 200, Upper Newport 30-35, Los Penasquitos 30, and Tijuana Estuary 150. These estimates, admittedly very rough, indicate a total Light-footed Rail population on only about 500 birds. Recognizing that rails are secretive and hard to inventory, the actual count could be somewhat higher, but I feel it is most unlikely that the number could be more than 750 birds altogether. Reductions in Light-footed Clapper Rail populations can be attributed almost entirely to loss of habitat. An estimated 26,000 acres of saltmarsh once existed between Santa Barbara and the Mexican border. At present there are approximately 8500 acres, much of which has been degraded by pollution, water diversion, and restriction of tidal flow. Of those areas currently occupied by Clapper Rails, few can be considered to have a very secure future. Of the four major areas only Anaheim Bay appears to be relatively safe from future habitat destruction. Tijuana Estuary, Los Penasquitos Lagoon, and Upper Newport Bay are all threatened by commercial developments that could reduce or destroy local rail populations. I have not visited Baja California, but I believe there is still a substantial population of Clapper Rails in the marshes around San Quintin Bay. Taxonomists do not agree on the subspecific identity of these birds, but some feel they are representatives of the Light-footed race. If so, it is fortunate to have a relatively secure (for now) reservoir of these birds, but whether the Light-footed Clapper Rail survives within the United States may well be decided within the next few years.

49 CFR 392.12 - Highway-rail crossings; safe clearance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Highway-rail crossings; safe clearance. 392.12... DRIVING OF COMMERCIAL MOTOR VEHICLES Driving of Commercial Motor Vehicles § 392.12 Highway-rail crossings; safe clearance. No driver of a commercial motor vehicle shall drive onto a highway-rail grade crossing...

49 CFR 392.12 - Highway-rail crossings; safe clearance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Highway-rail crossings; safe clearance. 392.12... DRIVING OF COMMERCIAL MOTOR VEHICLES Driving of Commercial Motor Vehicles § 392.12 Highway-rail crossings; safe clearance. No driver of a commercial motor vehicle shall drive onto a highway-rail grade crossing...

76 FR 17615 - Highway-Rail Grade Crossing; Safe Clearance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-30

...-2006-25660] RIN 2137-AE69 & 2126-AB04 Highway-Rail Grade Crossing; Safe Clearance AGENCY: Pipeline and... PHMSA and FMCSA extend the comment period for the Highway-Rail Grade Crossing; Safe Clearance Notice of... Alliance (CVSA) requested that PHMSA and FMCSA extend the comment period for the Highway-Rail Grade...

Truck safety at highway-rail grade crossings.

DOT National Transportation Integrated Search

2012-06-01

Safety at highway-rail grade crossings (HRGC) is a major concern for different agencies because increasing highway and rail : traffic presents a greater risk of crashes at these locations. In 2008, there were 2,391 crashes and 523 fatalities reported...

Fire Safety Countermeasures for Urban Rail Vehicles

DOT National Transportation Integrated Search

1992-07-01

The Volpe National Transportation Systems Center (VNTSC) has analyzed transit system fire statistics to learn how often fire and smoke incidents occur on rail transit systems. While the threat of fire accounts for only a small percentage of all rail ...

A national survey of commuter rail policy.

DOT National Transportation Integrated Search

2015-09-22

The research project will provided a detailed survey of the history and effectiveness of commuter rail policy in the United States. It will examine the means by which commuter rail policy is locally modified and re-employed in subsequent commuter rai...

Safer bridge railings, volume 1 summary report.

DOT National Transportation Integrated Search

1984-06-01

This study consisted of strength analyses of five in-service bridge railing systems, thirty full-scale vehicle crash tests on those railing systems and on a load measuring wall, the development of recommended design guidelines and deve1opment of reco...

49 CFR 213.121 - Rail joints.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the rail on which it is applied. (b) If a joint bar on Classes 3 through 5 track is cracked, broken... at each joint in Classes 2 through 5 track, and with at least one bolt in Class 1 track. (e) In the... accommodate expansion and contraction due to temperature variations. When no-slip, joint-to-rail contact...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

Wear Enhancement of Wheel-Rail Interaction by Ultrasonic Nanocrystalline Surface Modification Technique.

PubMed

Chang, Seky; Pyun, Young-Sik; Amanov, Auezhan

2017-02-16

In this study, an ultrasonic nanocrystalline surface modification (UNSM) technique was applied to normal and heat-treated rails made of 60 kgK steel to enhance the wear resistance of the wheel-rail interaction. The hardness and compressive residual stress values of the untreated and UNSM-treated rails were measured by the Brinell hardness tester and X-ray diffraction technique, respectively. It was found, according to the measurement results, that the hardness was increased by about 20% and 8%, whereas the compressive residual stress was induced by about 52% and 62% for the UNSM-treated normal and heat-treated rails, respectively. The UNSM-treated normal rail showed a slightly higher hardness than the heat-treated rail. The wear resistance of rails with respect to rotating speed and rolling time was assessed using a rolling contact wear (RCW) tester under dry conditions. The RCW test results revealed that the wear of the UNSM-treated rails was enhanced in comparison with those of the untreated rails. Also, the wear amount of the rails was increased with increasing the rotation speed. The UNSM-treated normal rail exhibited the highest wear resistance with respect to the rotation speed. The wear mechanisms of the rails are also discussed based on microscopic images of the worn out surfaces.

Wear Enhancement of Wheel-Rail Interaction by Ultrasonic Nanocrystalline Surface Modification Technique

PubMed Central

Chang, Seky; Pyun, Young-Sik; Amanov, Auezhan

2017-01-01

In this study, an ultrasonic nanocrystalline surface modification (UNSM) technique was applied to normal and heat-treated rails made of 60 kgK steel to enhance the wear resistance of the wheel-rail interaction. The hardness and compressive residual stress values of the untreated and UNSM-treated rails were measured by the Brinell hardness tester and X-ray diffraction technique, respectively. It was found, according to the measurement results, that the hardness was increased by about 20% and 8%, whereas the compressive residual stress was induced by about 52% and 62% for the UNSM-treated normal and heat-treated rails, respectively. The UNSM-treated normal rail showed a slightly higher hardness than the heat-treated rail. The wear resistance of rails with respect to rotating speed and rolling time was assessed using a rolling contact wear (RCW) tester under dry conditions. The RCW test results revealed that the wear of the UNSM-treated rails was enhanced in comparison with those of the untreated rails. Also, the wear amount of the rails was increased with increasing the rotation speed. The UNSM-treated normal rail exhibited the highest wear resistance with respect to the rotation speed. The wear mechanisms of the rails are also discussed based on microscopic images of the worn out surfaces. PMID:28772549

Transportation, social and financial impacts of light and commuter rail.

DOT National Transportation Integrated Search

2009-09-01

While transportation impacts are often masked by heavy growth in corridor traffic and latent travel demand, : modeling enables measuring the real transportation impacts of rail projects. Rail transit is both safe and : environmentally friendly. Rail ...

77 FR 64249 - Track Safety Standards; Improving Rail Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-19

... specific problems. This is a result of high traffic volumes that load the rail and accelerate defect growth... influenced by tonnage. Rapid growth rates can also be associated with rail where high-tensile residual stresses are present in the railhead and in CWR in lower temperature ranges where the rail is in high...

PERSONAL EXPOSURE AND AMBIENT AIR SAMPLING RELATED TO AN ELDERLY POPULATION LIVING IN A BALTIMORE RETIREMENT CENTER: PRELIMINARY FINDINGS OF THE 1998 BALTIMORE STUDY

EPA Science Inventory

The 1998 Baltimore PM Epidemiology-Exposure Study was conducted during the summer of 1998 with a goal of performing exposure assessment of PM and related copollutants involving a potentially susceptible population living in a retirement facility.

A total of 305 PM2.5,...

49 CFR 1580.201 - Rail security coordinator.

Code of Federal Regulations, 2010 CFR

2010-10-01

... system that is not operating on track that is part of the general railroad system of transportation... SECURITY Passenger Rail Including Passenger Railroad Carriers, Rail Transit Systems, Tourist, Scenic.... This section applies to: (1) Each passenger railroad carrier, including each carrier operating light...

Method for Predicting Thermal Buckling in Rails

DOT National Transportation Integrated Search

2018-01-01

A method is proposed herein for predicting the onset of thermal buckling in rails in such a way as to provide a means of avoiding this type of potentially devastating failure. The method consists of the development of a thermomechanical model of rail...

49 CFR 213.119 - Continuous welded rail (CWR); plan contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... following items: (i) Loose, bent, or missing joint bolts; (ii) Rail end batter or mismatch that contributes... amount and length of rail end batter or ramp on each rail end; the amount of tread mismatch; the vertical...

49 CFR 213.119 - Continuous welded rail (CWR); plan contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... following items: (i) Loose, bent, or missing joint bolts; (ii) Rail end batter or mismatch that contributes... amount and length of rail end batter or ramp on each rail end; the amount of tread mismatch; the vertical...

Another look at the question of density and rail transit.

DOT National Transportation Integrated Search

2011-07-01

Long community discussions about rail often include whether a citys spatial distribution of : housing, employment and other trip generators is conducive to supporting rail transit. A citys : decision to construct rail transit is based on an arr...

Track dynamic behavior at rail welds at high speed

NASA Astrophysics Data System (ADS)

Xiao, Guangwen; Xiao, Xinbiao; Guo, Jun; Wen, Zefeng; Jin, Xuesong

2010-06-01

As a vehicle passing through a track with different weld irregularities, the dynamic performance of track components is investigated in detail by using a coupled vehicle-track model. In the model, the vehicle is modeled as a multi-body system with 35 degrees of freedom, and a Timoshenko beam is used to model the rails which are discretely supported by sleepers. In the track model, the sleepers are modeled as rigid bodies accounting for their vertical, lateral and rolling motions and assumed to move backward at a constant speed to simulate the vehicle running along the track at the same speed. In the study of the coupled vehicle and track dynamics, the Hertizian contact theory and the theory proposed by Shen-Hedrick-Elkins are, respectively, used to calculate normal and creep forces between the wheel and the rails. In the calculation of the normal forces, the coefficient of the normal contact stiffness is determined by transient contact condition of the wheel and rail surface. In the calculation of the creepages, the lateral, roll-over motions of the rail and the fact that the relative velocity between the wheel and rail in their common normal direction is equal to zero are simultaneously taken into account. The motion equations of the vehicle and track are solved by means of an explicit integration method, in which the rail weld irregularities are modeled as local track vertical deviations described by some ideal cosine functions. The effects of the train speed, the axle load, the wavelength and depth of the irregularities, and the weld center position in a sleeper span on the wheel-rail impact loading are analyzed. The numerical results obtained are greatly useful in the tolerance design of welded rail profile irregularity caused by hand-grinding after rail welding and track maintenances.

49 CFR 213.121 - Rail joints.

Code of Federal Regulations, 2011 CFR

2011-10-01

... at each joint in Classes 2 through 5 track, and with at least one bolt in Class 1 track. (e) In the... continuous welded rail track prescribed in this part. (g) No rail shall have a bolt hole which is torch cut... 21, 1999. (h) No joint bar shall be reconfigured by torch cutting in Classes 3 through 5 track. ...

Cleveland-Columbus-Cincinnati high-speed rail study

DOT National Transportation Integrated Search

2001-07-01

In the past five years, the evaluation of different high-speed rail (HSR) studies in the Midwest has resulted in a realization that high speed rail, with speeds greater than 110 miles per hour, is too expensive in the short term to be implemented in ...

Green's functions for analysis of dynamic response of wheel/rail to vertical excitation

NASA Astrophysics Data System (ADS)

Mazilu, Traian

2007-09-01

An analytical model to simulate wheel/rail interaction using the Green's functions method is proposed in this paper. The model consists of a moving wheel on a discretely supported rail. Particularly for this model of rail, the bending and the longitudinal displacement are coupled due to the rail pad and a complex model of the rail pad is adopted. An efficient method for solving a time-domain analysis for wheel/rail interaction is presented. The method is based on the properties of the rail's Green functions and starting to these functions, a track's Green matrix is assembled for the numerical simulations of wheel/rail response due to three kinds of vertical excitations: the steady-state interaction, the rail corrugation and the wheel flat. The study points to influence of the worn rail—rigid contact—on variation in the wheel/rail contact force. The concept of pinned-pinned inhibitive rail pad is also presented.

Evaluation Findings from High School Reform Efforts in Baltimore

ERIC Educational Resources Information Center

Smerdon, Becky; Cohen, Jennifer

2009-01-01

The Baltimore City Public School System (BCPSS) is one of the first urban districts in the country to undertake large-scale high school reform, phasing in small learning communities by opening new high schools and transforming large, comprehensive high schools into small high schools. With support from the Bill & Melinda Gates Foundation, a…

7. EXTERIOR VIEW OF BALTIMORE FAN HOUSE, AIRWAY, AND HILLMAN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. EXTERIOR VIEW OF BALTIMORE FAN HOUSE, AIRWAY, AND HILLMAN FAN HOUSE LOOKING SOUTHEAST The roof of the 1908 Baltimore Fan House is to the left; the doorway opens onto the rear of the metal fan housing. In the immediate foreground is a section of the blast doors installed in the airway directly over the shaft to protect the fans in case of a mine explosion. The sloping airway, to the right, connects with the New Fan House, whose metal updraft chimney is evident in the right background. The engine house of the Hillman Fan House is in the left background with the fan housing and updraft chimney connected. The boiler house stack is in the background. All of the engines in the fan complex were powered by the boiler house. - Dorrance Colliery Fan Complex, South side of Susquehanna River at Route 115 & Riechard Street, Wilkes-Barre, Luzerne County, PA

Field homogeneity improvement of maglev NdFeB magnetic rails from joints.

PubMed

Li, Y J; Dai, Q; Deng, C Y; Sun, R X; Zheng, J; Chen, Z; Sun, Y; Wang, H; Yuan, Z D; Fang, C; Deng, Z G

2016-01-01

An ideal magnetic rail should provide a homogeneous magnetic field along the longitudinal direction to guarantee the reliable friction-free operation of high temperature superconducting (HTS) maglev vehicles. But in reality, magnetic field inhomogeneity may occur due to lots of reasons; the joint gap is the most direct one. Joint gaps inevitably exist between adjacent segments and influence the longitudinal magnetic field homogeneity above the rail since any magnetic rails are consisting of many permanent magnet segments. To improve the running performance of maglev systems, two new rail joints are proposed based on the normal rail joint, which are named as mitered rail joint and overlapped rail joint. It is found that the overlapped rail joint has a better effect to provide a competitive homogeneous magnetic field. And the further structure optimization has been done to ensure maglev vehicle operation as stable as possible when passing through those joint gaps. The results show that the overlapped rail joint with optimal parameters can significantly reduce the magnetic field inhomogeneity comparing with the other two rail joints. In addition, an appropriate gap was suggested when balancing the thermal expansion of magnets and homogenous magnetic field, which is considered valuable references for the future design of the magnetic rails.

The electric rail gun for space propulsion

NASA Technical Reports Server (NTRS)

Bauer, D. P.; Barber, J. P.; Vahlberg, C. J.

1981-01-01

An analytic feasibility investigation of an electric propulsion concept for space application is described. In this concept, quasistatic thrust due to inertial reaction to repetitively accelerated pellets by an electric rail gun is used to propel a spacecraft. The study encompasses the major subsystems required in an electric rail gun propulsion system. The mass, performance, and configuration of each subsystem are described. Based on an analytic model of the system mass and performance, the electric rail gun mission performance as a reusable orbital transfer vehicle (OTV) is analyzed and compared to a 30 cm ion thruster system (BIMOD) and a chemical propulsion system (IUS) for payloads with masses of 1150 kg and 2300 kg. For system power levels in the range from 25 kW(e) to 100 kW(e) an electric rail gun OTV is more attractive than a BIMOD system for low Earth orbit to geosynchronous orbit transfer durations in the range from 20 to 120 days.

77 FR 68722 - National Highway-Rail Crossing Inventory Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

...-0007, Notice No. 2] RIN 2130-AC26 National Highway-Rail Crossing Inventory Reporting Requirements... Notice of Proposed Rulemaking (NPRM) on National Highway-Rail Crossing Inventory Reporting Requirements... National Highway-Rail Crossing Inventory (Crossing Inventory). This notice announces the scheduling of the...

Understanding Expanded School Mental Health Services in Baltimore City

ERIC Educational Resources Information Center

Walrath, Christine M.; Bruns, Eric J.; Anderson, Karyn L.; Glass-Siegal, Marcia; Weist, Mark D.

2004-01-01

This article explores the nature of expanded school mental health (ESMH) services in Baltimore City, which at the time of the study were incorporated into 40% of the citys public schools. A provider survey was distributed to ESMH clinicians to gather information on the characteristics of service providers and recipients, types of services being…

Wetting a rail tanker behind a noise shield.

PubMed

Rosmuller, Nils

2009-05-30

In the Netherlands, the Betuweline is a dedicated freight railway. It will, among other things, be used for transportation of all kinds of hazardous materials from the Port of Rotterdam to the German Hinterland and vice versa. The line is approximately 150 km long. Alongside the line, over more than 100 km noise shields are apparent. The question is to what extent this noise shield hinders the cooling of a rail tanker, carrying flammable liquid such as liquefied petroleum gas (LPG)? To answer this question, a full scale test was conducted on an already constructed part of the Betuweline [N. Rosmuller, D.W.G. Arentsen, (2005). Praktijkproeven Betuweroute: Instantane uitstroming en koeling 24 juni 2005, Nibra, Arnhem, The Netherlands]. Two railcars and a rail tanker were placed behind a 3m high noise shield. First, it was tested as to whether firemen or water canons should be used to deliver the water. Water canons were best next, four positions of the water canons to wet the rail tanker were tested. Three camera's and three observers recorded the locations and the extent of water that hit the rail tanker. The results indicate that the noise shield, to a large extent, prevents the water from hitting, and therefore cooling, the rail tanker. The upper parts of the rail tanker were minimally struck by the water canons and the small amount of water flowing down the rail tanker did not reach the lower parts of it because of the armatures at the rail tanker. Also, the amount of water in the ditches to be used for wetting was too small. The ditch nearby ran empty. These insights are both relevant to emergency responders for disaster abatement purposes and to water management organizations. The Ministry of Transport is examining the possible strategies to deal with these findings. The results are based upon one single full scale test near a 3m high noise shield. In addition, it would be valuable to determine what the influence would be of other heights of the noise shields.

Investigation into the vibration of metro bogies induced by rail corrugation

NASA Astrophysics Data System (ADS)

Ling, Liang; Li, Wei; Foo, Elbert; Wu, Lei; Wen, Zefeng; Jin, Xuesong

2017-01-01

The current research of rail corrugation mainly focuses on the mechanisms of its formation and development. Compared with the root causes and development mechanisms, the wheel-rail impacts, the fatigue failure of vehicle-track parts, and the loss of ride comfort due to rail corrugation should also be taken into account. However, the influences of rail corrugation on vehicle and track vibration, and failure of vehicle and track structural parts are barely discussed in the literature. This paper presents an experimental and numerical investigation of the structural vibration of metro bogies caused by rail corrugation. Extensive experiments are conducted to investigate the effects of short-pitch rail corrugation on the vibration accelerations of metro bogies. A dynamic model of a metro vehicle coupled with a concrete track is established to study the influence of rail corrugation on the structural vibration of metro bogies. The field test results indicate that the short-pitch rail corrugation generates strong vibrations on the axle-boxes and the bogie frames, therefore, accelerates the fatigue failure of the bogie components. The numerical results show that short-pitch rail corrugation may largely reduce the fatigue life of the coil spring, and improving the damping value of the primary vertical dampers is likely to reduce the strong vibration induced by short-pitch rail corrugation. This research systematically studies the effect of rail corrugation on the vibration of metro bogies and proposes some remedies for mitigating strong vibrations of metro bogies and reducing the incidence of failure in primary coil springs, which would be helpful in developing new metro bogies and track maintenance procedures.

77 FR 12182 - Safety Standard for Portable Bed Rails: Final Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-29

... of ASTM F2085- 10a, comply with the following: (i) 1.4.1 Foam and inflatable bed rails need meet only...--portable bed rail constructed primarily of nonrigid materials such as fabric or foam. 3.1.11 inflatable bed..., inflatable bed rail, are terms that are now incorporated as non-rigid bed rail under new section 3.1.12 in...

Simulations of roughness initiation and growth on railway rails

NASA Astrophysics Data System (ADS)

Sheng, X.; Thompson, D. J.; Jones, C. J. C.; Xie, G.; Iwnicki, S. D.; Allen, P.; Hsu, S. S.

2006-06-01

A model for the prediction of the initiation and growth of roughness on the rail is presented. The vertical interaction between a train and the track is calculated as a time history for single or multiple wheels moving on periodically supported rails, using a wavenumber-based approach. This vertical dynamic wheel/rail force arises from the varying stiffness due to discrete supports (i.e. parametric excitation) and the roughness excitation on the railhead. The tangential contact problem between the wheel and rail is modelled using an unsteady two-dimensional approach and also using the three-dimensional contact model, FASTSIM. This enables the slip and stick regions in the contact patch to be identified from the input geometry and creepage between the wheel and rail. The long-term wear growth is then predicted by applying repeated passages of the vehicle wheelsets, as part of an iterative solution.

Prototype Rail Crossing Violation Warning Application Project Report.

DOT National Transportation Integrated Search

2017-09-05

This report is the Project Report for the Rail Crossing Violation Warning (RCVW) safety application developed for the project on Rail Crossing Violation Warning Application and Infrastructure Connection, providing a means for equipped connected vehic...

77 FR 17121 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, Department of Transportation. ACTION: Approval of rail cost adjustment factor. [[Page 17122

49 CFR 212.233 - Apprentice highway-rail grade crossing inspector.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Apprentice highway-rail grade crossing inspector... Inspection Personnel § 212.233 Apprentice highway-rail grade crossing inspector. (a) An apprentice highway... Administrator for Safety leading to qualification as a highway-rail grade crossing inspector. The apprentice...

49 CFR 212.233 - Apprentice highway-rail grade crossing inspector.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Apprentice highway-rail grade crossing inspector... Inspection Personnel § 212.233 Apprentice highway-rail grade crossing inspector. (a) An apprentice highway... Administrator for Safety leading to qualification as a highway-rail grade crossing inspector. The apprentice...

49 CFR 212.233 - Apprentice highway-rail grade crossing inspector.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Apprentice highway-rail grade crossing inspector... Inspection Personnel § 212.233 Apprentice highway-rail grade crossing inspector. (a) An apprentice highway... Administrator for Safety leading to qualification as a highway-rail grade crossing inspector. The apprentice...

49 CFR 212.233 - Apprentice highway-rail grade crossing inspector.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Apprentice highway-rail grade crossing inspector... Inspection Personnel § 212.233 Apprentice highway-rail grade crossing inspector. (a) An apprentice highway... Administrator for Safety leading to qualification as a highway-rail grade crossing inspector. The apprentice...

49 CFR 212.233 - Apprentice highway-rail grade crossing inspector.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Apprentice highway-rail grade crossing inspector... Inspection Personnel § 212.233 Apprentice highway-rail grade crossing inspector. (a) An apprentice highway... Administrator for Safety leading to qualification as a highway-rail grade crossing inspector. The apprentice...

30 CFR 57.9102 - Movement of independently operating rail equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Movement of independently operating rail... NONMETAL MINES Loading, Hauling, and Dumping Traffic Safety § 57.9102 Movement of independently operating rail equipment. Movement of two or more pieces of rail equipment operating independently on the same...

75 FR 16564 - High-Speed Intercity Passenger Rail (HSIPR) Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... services to avoid shipping delays. Application forms are available at http://www.fra.dot.gov/Pages/2243..., and 501--Intercity Passenger Rail Service Corridor Capital Assistance (codified at 49 U.S.C. chapter... High Speed Rail Corridors and Intercity Passenger Rail Service.'' This document incorporates interim...

The Beginner's Guide to Wind Tunnels with TunnelSim and TunnelSys

NASA Technical Reports Server (NTRS)

Benson, Thomas J.; Galica, Carol A.; Vila, Anthony J.

2010-01-01

The Beginner's Guide to Wind Tunnels is a Web-based, on-line textbook that explains and demonstrates the history, physics, and mathematics involved with wind tunnels and wind tunnel testing. The Web site contains several interactive computer programs to demonstrate scientific principles. TunnelSim is an interactive, educational computer program that demonstrates basic wind tunnel design and operation. TunnelSim is a Java (Sun Microsystems Inc.) applet that solves the continuity and Bernoulli equations to determine the velocity and pressure throughout a tunnel design. TunnelSys is a group of Java applications that mimic wind tunnel testing techniques. Using TunnelSys, a team of students designs, tests, and post-processes the data for a virtual, low speed, and aircraft wing.

49 CFR 1580.201 - Rail security coordinator.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and alternate(s) must be appointed at the corporate level. (d) Each passenger railroad carrier and rail transit system required to have an RSC must provide to TSA the names, titles, phone number(s), and... any of this information changes. (e) Each passenger railroad carrier and rail transit system required...

49 CFR 1580.201 - Rail security coordinator.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and alternate(s) must be appointed at the corporate level. (d) Each passenger railroad carrier and rail transit system required to have an RSC must provide to TSA the names, titles, phone number(s), and... any of this information changes. (e) Each passenger railroad carrier and rail transit system required...

Propagation characteristics of ultrasonic guided waves in continuously welded rail

NASA Astrophysics Data System (ADS)

Yao, Wenqing; Sheng, Fuwei; Wei, Xiaoyuan; Zhang, Lei; Yang, Yuan

2017-07-01

Rail defects cause numerous railway accidents. Trains are derailed and serious consequences often occur. Compared to traditional bulk wave testing, ultrasonic guided waves (UGWs) can provide larger monitoring ranges and complete coverage of the waveguide cross-section. These advantages are of significant importance for the non-destructive testing (NDT) of the continuously welded rail, and the technique is therefore widely used in high-speed railways. UGWs in continuous welded rail (CWR) and their propagation characteristics have been discussed in this paper. Finite element methods (FEMs) were used to accomplish a vibration modal analysis, which is extended by a subsequent dispersion analysis. Wave structure features were illustrated by displacement profiles. It was concluded that guided waves have the ability to detect defects in the rail via choice of proper mode and frequency. Additionally, thermal conduction that is caused by temperature variation in the rail is added into modeling and simulation. The results indicated that unbalanced thermal distribution may lead to the attenuation of UGWs in the rail.

Community Resources for Career Education: Starring Baltimore's McCormick Plan

ERIC Educational Resources Information Center

Carey, E. Niel; Marshall, Howard E.

1973-01-01

The article develops from a general discussion of the utilization of community resources in career education to a discussion of a particular program--the McCormick Plan in Baltimore--and other Maryland programs. Suggestions drawn from those programs are offered for identifying and using such resources. (AG)

Iowa connections : get on board with passenger rail!

DOT National Transportation Integrated Search

2010-09-22

Iowas rail network offers a great opportunity for passenger rail service, connecting Iowas largest urban areas to Chicago and potential other Midwest metropolitan centers. The Iowa Department of Transportation (DOT), working with the state of I...

The structural response of a rail accelerator

NASA Technical Reports Server (NTRS)

Wang, S. Y.

1983-01-01

The transient response of a 0.4 by 0.6 cm rectangular bore rail accelerator was analyzed by a three dimensional finite element code. The copper rail deflected to a peak value of 0.08 mm in compression and then oscillated at an amplitude of 0.02 mm. Simultaneously the insulating side wall of glass fabric base, epoxy resin laminate (G-1o) was compressed to a peak value of 0.13 mm and rebounded to a steady state in extension. Projectile pinch or blowby due to the rail extension or compression, respectively, can be identified by examining the time history of the rail displacement. The effect of blowby was most significant at the side wall characterized by mm size displacement in compression. Dynamic stress calculations indicate that the G-10 supporting material behind the rail is subjected to over 21 MPa at which the G-10 could fail if the laminate was not carefully oriented. Results for a polycarbonate resin (Lexan) side wall show much larger displacements and stresses than for G-10. The tradeoff between the transparency of Lexan and the mechanical strength of G-10 for sidewall material is obvious. Displacement calculations from the modal method are smaller than the results from the direct integration method by almost an order of magnitude, because the high frequency effect is neglected.

30 CFR 56.9102 - Movement of independently operating rail equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Movement of independently operating rail... MINES Loading, Hauling, and Dumping Traffic Safety § 56.9102 Movement of independently operating rail equipment. Movement of two or more pieces of rail equipment operating independently on the same track shall...

A 3D Laser Profiling System for Rail Surface Defect Detection

PubMed Central

Li, Qingquan; Mao, Qingzhou; Zou, Qin

2017-01-01

Rail surface defects such as the abrasion, scratch and peeling often cause damages to the train wheels and rail bearings. An efficient and accurate detection of rail defects is of vital importance for the safety of railway transportation. In the past few decades, automatic rail defect detection has been studied; however, most developed methods use optic-imaging techniques to collect the rail surface data and are still suffering from a high false recognition rate. In this paper, a novel 3D laser profiling system (3D-LPS) is proposed, which integrates a laser scanner, odometer, inertial measurement unit (IMU) and global position system (GPS) to capture the rail surface profile data. For automatic defect detection, first, the deviation between the measured profile and a standard rail model profile is computed for each laser-imaging profile, and the points with large deviations are marked as candidate defect points. Specifically, an adaptive iterative closest point (AICP) algorithm is proposed to register the point sets of the measured profile with the standard rail model profile, and the registration precision is improved to the sub-millimeter level. Second, all of the measured profiles are combined together to form the rail surface through a high-precision positioning process with the IMU, odometer and GPS data. Third, the candidate defect points are merged into candidate defect regions using the K-means clustering. At last, the candidate defect regions are classified by a decision tree classifier. Experimental results demonstrate the effectiveness of the proposed laser-profiling system in rail surface defect detection and classification. PMID:28777323

An automated system for rail transit infrastructure inspection.

DOT National Transportation Integrated Search

2015-03-01

This project applied commercial remote sensing and spatial information (CRS&SI) : technologies such as Ground Penetrating Radar (GPR), laser, GIS, and GPS to passenger rail : inspections. An integrated rail inspection system that can be mounted on hi...

46 CFR 32.02-10 - Rails-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... guard rail supports shall be placed on the flat of the deck. On other decks and bridges the rails shall... feet or more in width. Tank vessels to which this paragraph applies constructed prior to June 15, 1987...

46 CFR 32.02-10 - Rails-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... guard rail supports shall be placed on the flat of the deck. On other decks and bridges the rails shall... feet or more in width. Tank vessels to which this paragraph applies constructed prior to June 15, 1987...

Wheel load cycle tag for rail : final report.

DOT National Transportation Integrated Search

2015-12-01

The Federal Railroad Administration (FRA) has determined that there is a research need to collect and analyze statistical usage : data to help ascertain the cumulative load-induced fatigue on rail track segments. The estimation of rail segment burden...

Optimal Placement Method of RFID Readers in Industrial Rail Transport for Uneven Rail Traflc Volume Management

NASA Astrophysics Data System (ADS)

Rakhmangulov, Aleksandr; Muravev, Dmitri; Mishkurov, Pavel

2016-11-01

The issue of operative data reception on location and movement of railcars is significant the constantly growing requirements of the provision of timely and safe transportation. The technical solution for efficiency improvement of data collection on rail rolling stock is the implementation of an identification system. Nowadays, there are several such systems, distinguished in working principle. In the authors' opinion, the most promising for rail transportation is the RFID technology, proposing the equipping of the railway tracks by the stationary points of data reading (RFID readers) from the onboard sensors on the railcars. However, regardless of a specific type and manufacturer of these systems, their implementation is affiliated with the significant financing costs for large, industrial, rail transport systems, owning the extensive network of special railway tracks with a large number of stations and loading areas. To reduce the investment costs for creation, the identification system of rolling stock on the special railway tracks of industrial enterprises has developed the method based on the idea of priority installation of the RFID readers on railway hauls, where rail traffic volumes are uneven in structure and power, parameters of which is difficult or impossible to predict on the basis of existing data in an information system. To select the optimal locations of RFID readers, the mathematical model of the staged installation of such readers has developed depending on the non-uniformity value of rail traffic volumes, passing through the specific railway hauls. As a result of that approach, installation of the numerous RFID readers at all station tracks and loading areas of industrial railway stations might be not necessary,which reduces the total cost of the rolling stock identification and the implementation of the method for optimal management of transportation process.

Youth Apprenticeship: A Hopeful Approach for Improving Outcomes for Baltimore Youth. The Abell Report. Volume 28, No. 2

ERIC Educational Resources Information Center

Lerman, Robert I.; Packer, Arnold

2015-01-01

Youth transitions to rewarding careers remain a critical problem for America's current and future workforce. In Baltimore, where only one in five graduates of Baltimore City Public Schools matriculates to a four-year college and the unemployment rate for 16 to 19 year-olds is over 40 percent, opportunities to gain meaningful training and work…

GMT azimuth bogie wheel-rail interface wear study

NASA Astrophysics Data System (ADS)

Teran, Jose; Lindh, Cory; Morgan, Chris; Manuel, Eric; Bigelow, Bruce C.; Burgett, William S.

2016-07-01

Performance of the GMT azimuth drive system is vital for the operation of the telescope and, as such, all components subject to wear at the drive interface merit a high level of scrutiny for achieving a proper balance between capital costs, maintenance costs, and the risk for downtime during planned and unplanned maintenance or replacement procedures. Of particular importance is the interface between the azimuth wheels and rail, as usage frequency is high, the full weight of the enclosure must be transferred through small patches of contact, and replacement of the rail would pose a greater logistical challenge than the replacement of smaller components such as bearings and gearmotors. This study investigates tradeoffs between various wheel-rail and roller-track interfaces, including performance, complexity, and anticipated wear considerations. First, a survey of railway and overhead crane industry literature is performed and general detailing recommendations are made to minimize wear and the risk of rolling contact fatigue. Second, Adams/VI-Rail is used to simulate lifetime wear of four specific configurations under consideration for the GMT azimuth wheel-rail interface; all studied configurations are shown to be viable, and their relative merits are discussed.

Control of rolling contact fatigue on premium rails in revenue service.

DOT National Transportation Integrated Search

2014-11-01

Effective rail maintenance strategies are : essential for controlling rolling contact fatigue : (RCF) and reducing wear of rails under heavy : axle load (HAL) operations. In an effort to : optimize rail maintenance strategies in revenue : service, Tr...

A desire named streetcar : fantasy and fact in rail transit planning

DOT National Transportation Integrated Search

1992-06-30

The forecasts that led local officials in eight U.S. cities to advocate rail transit projects over competing, less capital-intensive options grossly overestimated rail transit ridership and underestimated rail construction costs and operating expense...

THE 1974 OZONE EPISODE IN THE BALTIMORE-TO-RICHMOND CORRIDOR

EPA Science Inventory

An ozone alert in July of 1974 in the Washington, D.C., area is examined in detail. Ozone data for 16 stations in the Richmond-to-Baltimore corridor are examined in conjunction with meteorological data for the alert period. Emphases are given to trajectories of the air between th...

Concept of Integrated Information Systems of Rail Transport

NASA Astrophysics Data System (ADS)

Siergiejczyk, Mirosław; Gago, Stanisław

This paper will present a need to create integrated information systems of the rail transport and their links with other means of public transportation. IT standards will be discussed that are expected to create the integrated information systems of the rail transport. Also the main tasks will be presented of centralized information systems, the concept of their architecture, business processes and their implementation as well as the proposed measures to secure data. A method shall be proposed to implement a system to inform participants of rail transport in Polish conditions.

NASTRAN buckling study of a linear induction motor reaction rail

NASA Technical Reports Server (NTRS)

Williams, J. G.

1973-01-01

NASTRAN was used to study problems associated with the installation of a linear induction motor reaction rail test track. Specific problems studied include determination of the critical axial compressive buckling stress and establishment of the lateral stiffness of the reaction rail under combined loads. NASTRAN results were compared with experimentally obtained values and satisfactory agreement was obtained. The reaction rail was found to buckle at an axial compressive stress of 11,400 pounds per square inch. The results of this investigation were used to select procedures for installation of the reaction rail.

Rail Base Corrosion and Cracking Prevention: Phase 2

DOT National Transportation Integrated Search

2018-04-09

EWI was engaged by the Federal Railroad Administration to research rail treatments to prevent rail base corrosion in corrosive environments. A coating system was selected in Phase 1 and recommended for field trials. In Phase 2, four railroads sponsor...

Southeast Rail Operations (SEROps) : Phase I : Summary Report

DOT National Transportation Integrated Search

2008-05-01

This Summary Report documents the first phase of the SEROps study. Phase I investigated the regional rail transportation network in Florida, Georgia, North Carolina, and South Carolina as a system, and it engaged a diverse group of rail stakeholders ...

Prediction of Fatigue Crack Growth in Rail Steels.

DOT National Transportation Integrated Search

1981-10-01

Measures to prevent derailments due to fatigue failures of rails require adequate knowledge of the rate of propagation of fatigue cracks under service loading. The report presents a computational model for the prediction of crack growth in rails. The...

Plans for crash-tested wood bridge railings for concrete decks

Treesearch

Michael A. Ritter; Ronald K. Faller; Barry T. Rosson; Paula D. Hilbrich Lee; Sheila Rimal Duwadi

1998-01-01

As part of a continuing cooperative research between the Midwest Roadside Safety Facility (MwRSF); the USDA Forest Service, Forest Products Laboratory (FPL); and the Federal Highway Administration (FHWA), several crashworthy wood bridge railings and approach railing transitions have been adapted for use on concrete bridge decks. These railings meet testing and...

77 FR 54655 - Genesee & Wyoming Inc.-Control-RailAmerica, Inc., et al.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

... & Wyoming Inc.--Control--RailAmerica, Inc., et al. AGENCY: Surface Transportation Board. ACTION: Decision No... August 6, 2012, by Genesee and Wyoming Inc. (GWI) and RailAmerica, Inc. (RailAmerica). The application seeks Board approval under 49 U.S.C. 11323-11325 of the acquisition of control of RailAmerica, a...

Vermont rail capital investment policy plan : executive summary

DOT National Transportation Integrated Search

2001-10-01

The Vermont Agency of Transportation has prepared a Rail Capital Investment Policy Plan (RCIPP) for the purpose of providing guidance for the functioning of Vermont's rail System. The report represents the culmination of eight months of work by the s...

49 CFR 1039.13 - Rail intermodal transportation exemption.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Rail intermodal transportation exemption. 1039.13 Section 1039.13 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS EXEMPTIONS § 1039.13 Rail...

Light rail transit : state-of-the-art overview

DOT National Transportation Integrated Search

1977-05-01

This document presents an overview of light rail transit, an urban transit alternative which has the potential to help fill the need for flexibility in public transportation. Existing and proposed U.S. and Canadian light rail transit systems are desc...

49 CFR 1039.13 - Rail intermodal transportation exemption.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 8 2013-10-01 2013-10-01 false Rail intermodal transportation exemption. 1039.13 Section 1039.13 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS EXEMPTIONS § 1039.13 Rail...

49 CFR 1039.13 - Rail intermodal transportation exemption.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Rail intermodal transportation exemption. 1039.13 Section 1039.13 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS EXEMPTIONS § 1039.13 Rail...

49 CFR 1039.13 - Rail intermodal transportation exemption.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 8 2012-10-01 2012-10-01 false Rail intermodal transportation exemption. 1039.13 Section 1039.13 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS EXEMPTIONS § 1039.13 Rail...

49 CFR 1039.13 - Rail intermodal transportation exemption.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Rail intermodal transportation exemption. 1039.13 Section 1039.13 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS EXEMPTIONS § 1039.13 Rail...

Noise Prediction Models for Elevated Rail Transit Structures

DOT National Transportation Integrated Search

1975-08-01

The report presents the theoretical development of a model for the prediction of noise radiated by elevated structures on rail transit lines. In particular it deals with noise and vibration control for urban rail transit track and elevated noise and ...

Linear and/or curvilinear rail mount system

NASA Technical Reports Server (NTRS)

Thomas, Jackie D. (Inventor); Harris, Lawanna L. (Inventor)

2012-01-01

One or more linear and/or curvilinear mounting rails are coupled to a structure. Each mounting rail defines a channel and at least one cartridge assembly is engaged in the channel. Each cartridge assembly includes a housing that slides within the channel. The housing defines a curvilinearly-shaped recess longitudinally aligned with the channel when the housing is in engagement therewith. The cartridge assembly also includes a cleat fitted in the recess for sliding engagement therealong. The cleat can be coupled to a fastener that passes through the mounting rail and the housing when the housing is so-engaged in the channel. The cleat is positioned in the recess by a position of the fastener.

Investigation on CWR longitudinal restraint behavior in winter rail break and summer destressing operations.

DOT National Transportation Integrated Search

1997-08-01

This report presents the results of investigations on the rail anchor/fastener effects on rail movement and the resulting rail force distribution in continuous welded rail (CWR) track during rail breaks and destressing operations. Two types of tests ...

Home school student visit and introduction to rail transportation and engineering.

DOT National Transportation Integrated Search

2016-06-22

This project consisted of hosting local Champaign-Urbana, Illinois home school students for a visit to : the Rail Transportation and Engineering Center (RailTEC) at the University of Illinois at Urbana- : Champaign (UIUC). Beyond visiting RailTEC, st...

Dynamic testing of the T223 bridge rail.

DOT National Transportation Integrated Search

2009-09-01

The TxDOT T203 bridge rail is often used on bridges where asphalt overlays reduce the effective : height of the bridge rail. This reduction in height due to asphalt paving overlay is undesirable. For this : project, several geometric features were ch...

49 CFR 37.55 - Intercity rail station accessibility.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Intercity rail station accessibility. 37.55 Section 37.55 Transportation Office of the Secretary of Transportation TRANSPORTATION SERVICES FOR INDIVIDUALS WITH DISABILITIES (ADA) Transportation Facilities § 37.55 Intercity rail station accessibility...

49 CFR 172.510 - Special placarding provisions: Rail.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Special placarding provisions: Rail. 172.510 Section 172.510 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS..., TRAINING REQUIREMENTS, AND SECURITY PLANS Placarding § 172.510 Special placarding provisions: Rail. (a...

49 CFR 172.510 - Special placarding provisions: Rail.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Special placarding provisions: Rail. 172.510 Section 172.510 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS..., TRAINING REQUIREMENTS, AND SECURITY PLANS Placarding § 172.510 Special placarding provisions: Rail. (a...

78 FR 74056 - Rail Vehicles Access Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

...-0001] RIN 3014-AA42 Rail Vehicles Access Advisory Committee AGENCY: Architectural and Transportation... Architectural and Transportation Barriers Compliance Board (Access Board), established the Rail Vehicle Access... pursuant to the Americans with Disabilities Act for transportation vehicles that operate on fixed guideway...

Plans for crash-tested bridge railings for longitudinal wood decks

Treesearch

M. A. Ritter; R. K. Faller; P. D. Hilbrich Lee; B. T. Rosson; S. R. Duwadi

1995-01-01

In the past decade, bridge railing design criteria have moved away from static-load design and have focused on full-scale crash testing as a more appropriate and reliable means of evaluating bridge railings. The five bridge railing plans presented reflect the results of a cooperative research project between the Midwest Roadside Safety Facility, University of Nebraska...

Control of rail integrity by self-adaptive scheduling of rail tests

DOT National Transportation Integrated Search

1990-06-01

A guide for the scheduling of in-service tests of rail to detect defects is presented. The guide is designed for self-adaptation to changing track conditions, as reflected by the total rate of defect occurrence per test, the rate of 'service' defect ...

Numerical investigation on an array of Helmholtz resonators for the reduction of micro-pressure waves in modern and future high-speed rail tunnel systems

NASA Astrophysics Data System (ADS)

Tebbutt, J. A.; Vahdati, M.; Carolan, D.; Dear, J. P.

2017-07-01

Previous research has proposed that an array of Helmholtz resonators may be an effective method for suppressing the propagation of pressure and sound waves, generated by a high-speed train entering and moving in a tunnel. The array can be used to counteract environmental noise from tunnel portals and also the emergence of a shock wave in the tunnel. The implementation of an array of Helmholtz resonators in current and future high-speed train-tunnel systems is studied. Wave propagation in the tunnel is modelled using a quasi-one-dimensional formulation, accounting for non-linear effects, wall friction and the diffusivity of sound. A multi-objective genetic algorithm is then used to optimise the design of the array, subject to the geometric constraints of a demonstrative tunnel system and the incident wavefront in order to attenuate the propagation of pressure waves. It is shown that an array of Helmholtz resonators can be an effective countermeasure for various tunnel lengths. In addition, the array can be designed to function effectively over a wide operating envelope, ensuring it will still function effectively as train speeds increase into the future.

49 CFR 213.343 - Continuous welded rail (CWR).

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and...) Designation of a desired rail installation temperature range for the geographic area in which the CWR is... installation temperature range when adjusting CWR. (b) Rail anchoring or fastening requirements that will...

77 FR 76169 - Quarterly Rail Cost Adjustment Factor

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

....stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public Assistance...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the AAR's proposed rebasing calculations and...

Identification of hump highway/rail crossings in Kansas

DOT National Transportation Integrated Search

2003-07-01

Hump crossings or high-profile crossings are a highway/rail intersection (HRI) at which the road surface profile across the rail tracks may pose a risk of a low-clearance vehicle becoming stuck on the tracks. They may also pose a threat to heavy vehi...

75 FR 53734 - Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot Rail Corp.-Continuance in Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... noncarrier limited liability company that owns not less than 51% of the equity interests in PRH. PRH owns 100% of the stock of Patriot. Patriot is a noncarrier holding company that owns 100% of the stock of six...). Patriot currently controls the following six Class III rail carriers: Tennessee Southern Railroad Company...

76 FR 52380 - Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... the Construction and Operation of the Baltimore Grand Prix AGENCIES: Federal Highway Administration..., September 6, 2011. The closure is requested to accommodate the construction and operation of the Baltimore... most arriving by private vehicle. The construction and operation of the race course will create safety...

Offset-free rail-to-rail derandomizing peak detect-and-hold circuit

DOEpatents

DeGeronimo, Gianluigi; O'Connor, Paul; Kandasamy, Anand

2003-01-01

A peak detect-and-hold circuit eliminates errors introduced by conventional amplifiers, such as common-mode rejection and input voltage offset. The circuit includes an amplifier, three switches, a transistor, and a capacitor. During a detect-and-hold phase, a hold voltage at a non-inverting in put terminal of the amplifier tracks an input voltage signal and when a peak is reached, the transistor is switched off, thereby storing a peak voltage in the capacitor. During a readout phase, the circuit functions as a unity gain buffer, in which the voltage stored in the capacitor is provided as an output voltage. The circuit is able to sense signals rail-to-rail and can readily be modified to sense positive, negative, or peak-to-peak voltages. Derandomization may be achieved by using a plurality of peak detect-and-hold circuits electrically connected in parallel.

World Geography. The Port of Baltimore Workplace Skills Development Project.

ERIC Educational Resources Information Center

Walker, Sam

This set of learning modules was developed during a project to deliver workplace literacy instruction to individuals employed in the more than 50 businesses related to the activities of the Port of Baltimore. It is intended to accomplish the following objectives: familiarize students with basic concepts of geography; give students knowledge of…

76 FR 9225 - Drawbridge Operation Regulation; Curtis Creek, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

...; Department of Homeland Security Delegation No. 0170.1. 0 2. From February 17, 2011 to November 30, 2011... of the Pennington Avenue Bridge, across Curtis Creek, mile 0.9, at Baltimore, MD. This temporary... replacement of the grid deck, floor beams and stringers. DATES: This temporary final rule is effective from 6...

Review on Selection and Suitability of Rail Transit Station Design Pertaining to Public Safety

NASA Astrophysics Data System (ADS)

Akabal, Farah Mohd; Masirin, Mohd Idrus Haji Mohd; Abidin Akasah, Zainal; Rohani, Munzilah Md

2017-08-01

Railway has emerged as a fast, convenient, safe, clean, and low-cost alternative to air and road transportation. Many countries have invested in rail transportation. In America, Europe and Asia, large investments are planned for rail transportation. This is because congestion problems can be reduced with the introduction of rail transportation. Rail transportation involves several components which are important to ensure the smooth and safe delivery of services such as locomotives, rail stations and railway tracks. Rail transit stations are places where trains stop to pick-up and drop-off passengers. Stations are vital for many to enable them to engage in work and social commitments. This paper focuses only on the rail transit station as it is one of the important components in rail transportation. It is also considered as a key public meeting place and space for interactions in a community. The role of rail transit station and the requirements of a good rail transit station are also described in this paper. Steps in selecting the location of rail transit station include the function and facilities in rail transit station are discussed with reference to best practices and handbooks. Selection of the appropriate rail transit station locations may help users indirectly. In addition, this paper will also elucidate on the design considerations for an efficient and effective rail transit station. Design selections for the rail transit station must be balanced between aesthetic value and functional efficiency. The right design selection may help conserve energy, assure and facilitate consumers even thought a rail transit station plays a smaller role in attracting consumers compared to a shopping complex or a residential building. This will contribute towards better and greener building for a green transportation facility. Thus, with this paper it is expected to assist the relevant authority to identify important elements in the selection and determination of suitable

THE NATIONAL COASTAL ASSESSMENT SETAC ANNUAL MEETING, BALTIMORE, MD NOV 2001

EPA Science Inventory

To be presented at the 22nd Annual Meeting of the Society of Environmental Toxicology and Chemistry: Changing Environmental Awareness: Societal Concerns and Scientific Responses, 11-15 November 2001, Baltimore, MD. 1 p. (ERL,GB R859).

The primary purpose of the Environmen...

Rail-RNA: scalable analysis of RNA-seq splicing and coverage.

PubMed

Nellore, Abhinav; Collado-Torres, Leonardo; Jaffe, Andrew E; Alquicira-Hernández, José; Wilks, Christopher; Pritt, Jacob; Morton, James; Leek, Jeffrey T; Langmead, Ben

2017-12-15

RNA sequencing (RNA-seq) experiments now span hundreds to thousands of samples. Current spliced alignment software is designed to analyze each sample separately. Consequently, no information is gained from analyzing multiple samples together, and it requires extra work to obtain analysis products that incorporate data from across samples. We describe Rail-RNA, a cloud-enabled spliced aligner that analyzes many samples at once. Rail-RNA eliminates redundant work across samples, making it more efficient as samples are added. For many samples, Rail-RNA is more accurate than annotation-assisted aligners. We use Rail-RNA to align 667 RNA-seq samples from the GEUVADIS project on Amazon Web Services in under 16 h for US$0.91 per sample. Rail-RNA outputs alignments in SAM/BAM format; but it also outputs (i) base-level coverage bigWigs for each sample; (ii) coverage bigWigs encoding normalized mean and median coverages at each base across samples analyzed; and (iii) exon-exon splice junctions and indels (features) in columnar formats that juxtapose coverages in samples in which a given feature is found. Supplementary outputs are ready for use with downstream packages for reproducible statistical analysis. We use Rail-RNA to identify expressed regions in the GEUVADIS samples and show that both annotated and unannotated (novel) expressed regions exhibit consistent patterns of variation across populations and with respect to known confounding variables. Rail-RNA is open-source software available at http://rail.bio. anellore@gmail.com or langmea@cs.jhu.edu. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

33 CFR 117.541 - Baltimore Harbor-Patapsco River.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Patapsco River at Baltimore, shall open on signal from 5 a.m. to 6:30 a.m., 9:30 a.m. to 4 p.m., and 6 p.m... during this period. When a vessel desires to pass the draw from 9 p.m. to 5 a.m., notice shall be given... residence after 9 p.m. If the notice is given from 5 a.m. to 9 p.m. or if at least one half hour has elapsed...

33 CFR 117.541 - Baltimore Harbor-Patapsco River.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Patapsco River at Baltimore, shall open on signal from 5 a.m. to 6:30 a.m., 9:30 a.m. to 4 p.m., and 6 p.m... during this period. When a vessel desires to pass the draw from 9 p.m. to 5 a.m., notice shall be given... residence after 9 p.m. If the notice is given from 5 a.m. to 9 p.m. or if at least one half hour has elapsed...

Parks and people: An environmental justice inquiry in Baltimore, Maryland

Treesearch

Christopher G. Boone; Geoffrey L. Buckley; J. Morgan Grove; Chona Sister

2009-01-01

This article examines the distribution of parks in Baltimore, Maryland, as an environmental justice issue. In addition to established methods for measuring distribution of and access to parks, we employ a novel park service area approach that uses Thiessen polygons and dasymetric reapportioning of census data to measure potential park congestion as an equity outcome...

Effective Communication. The Port of Baltimore Workplace Skills Development Project.

ERIC Educational Resources Information Center

Blumner, Ellen

This set of learning modules was developed during a project to deliver workplace literacy instruction to individuals employed in the more than 50 businesses related to the activities of the Port of Baltimore. It is intended to help office staff of port businesses develop basic interpersonal communication and time and stress management skills. The…

77 FR 12476 - Drawbridge Operation Regulation; Curtis Creek, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... bridge need not open during the following specified closure periods: (i) From 7 a.m. on February 10, 2012... from the operating schedule that governs the I-695 Bridge, across Curtis Creek, mile 1.0, at Baltimore... closures to complete structural repairs. DATES: This deviation is effective from 6 a.m. on March 1, 2012...

75 FR 54069 - Drawbridge Operation Regulations; Curtis Creek, Baltimore, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-03

... Baltimore, MD. The requested change would have allowed the bridge to operate from a remote location at the...) 398-6629, e-mail [email protected] . If you have questions on viewing material in the... eliminating the need for a bridge tender by allowing the bridge to be operated from a remote location at the...

High Speed Rail (HSR) in the United States

DTIC Science & Technology

2009-12-08

Magnetic Levitation ( Maglev ) ...............................................................................................5 High Speed Rail In...commonly referred to as “ maglev .” 6 Passenger Rail Working Group of the National Surface... maglev train in 2003. Because of the greater costs, and relatively minor benefits,11 of operating at extremely high speeds, the top operating speed

Infrastructure monitoring from an in-service light rail vehicle.

DOT National Transportation Integrated Search

2016-01-01

Presently, rail inspection is performed either visually or with dedicated track geometry cars. The authors examine a more economical approach where rail inspection is performed by analyzing vibration data collected from an operational passenger train...

Material Evaluation of an Elastomer, Epoxy and Lightweight Concrete Rail Attachment System for Direct Fixation Light Rail Applications

NASA Astrophysics Data System (ADS)

Swarner, Benjamin R.

Sound Transit plans to extend its current light rail system, which runs along the I-5 corridor in Seattle, Washington, across the I-90 Homer Hadley floating bridge as part of a project to connect the major city centers in the region. But, no light rail has ever crossed a floating bridge due to several unique engineering challenges. One of these challenges is attaching the rails to the existing bridge deck without drilling into the bridge pontoons. This research program was developed to test and analyze a direct fixation method that uses lightweight concrete plinths and an elastomer-epoxy system to attach the rails to the bridge deck. The elastomer used was a two-part, pourable elastomer with cork particles intermixed to alter the mechanical properties of the material. A lightweight concrete mixture was analyzed for use in the plinths, and system tests investigated the system response under tensile, compressive and shear loading. The shear response of the system was examined further under varying loading conditions including different surface preparations, elastomer thicknesses, strain-rates and after freeze-thaw conditioning. Experimental data was examined for trends based on these parameters to best characterize the system, and the elastomer was evaluated in the context of modern elastomer research.

Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

USGS Publications Warehouse

Stiffler, Lydia L.; Anderson, James T.; Katzner, Todd

2018-01-01

There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king (Rallus elegans) and clapper rails (R. crepitans) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance (P ≤ 0.001), such that at <25 m, 90.3% of human‐recorded rails also were detected by the ARU, but at >75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different (P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU

NCHRP report 350 test 3-11 of the modified T8 bridge rail.

DOT National Transportation Integrated Search

2009-04-01

A new flexible bridge rail system, referred to as the T8 rail, was designed as a replacement for the T6 rail in high-speed applications on culverts and thin deck structures. The T8 rail failed a crash test when the breakaway posts failed the thin dec...

77 FR 52135 - Hamilton Bank, Baltimore, Maryland; Approval of Conversion Application

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... DEPARTMENT OF THE TREASURY Office of the Comptroller of the Currency [OCC Charter Number 701904] Hamilton Bank, Baltimore, Maryland; Approval of Conversion Application Notice is hereby given that on August 13, 2012, the Office of the Comptroller of the Currency (OCC) approved the application of Hamilton...

49 CFR 213.343 - Continuous welded rail (CWR).

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and Higher § 213.343 Continuous welded rail (CWR). Each track owner with track constructed of CWR shall have... 49 Transportation 4 2011-10-01 2011-10-01 false Continuous welded rail (CWR). 213.343 Section 213...

MASH Test 3-11 on the T131RC Bridge Rail

DOT National Transportation Integrated Search

2012-10-01

Texas Department of Transportation (TxDOT) currently uses the TxDOT Type T101RC Bridge Rail, : a steel post and beam bridge rail anchored to the top of concrete curbs. The T101RC Bridge Rail is : 27 inches in height and can be anchored to the top of ...

The light-footed clapper rail: An update

USGS Publications Warehouse

Wilburn, Cynthia A.; Jorgensen, Paul D.; Massey, Barbara W.; Basham, Venita A.

1979-01-01

A preliminary report on the Light-footed Clapper Rail, Rallus longirostris levipes, estimated a population of 500-750 birds in California (Wilbur, Am. Birds 28:868-870, 1974). Since then, additional work has been accomplished, most notably: (1) an intensive study of Carpinteria Marsh, Santa Barbara County, 1976-1977 (Basham); (2) a series of winter high tide counts at Anaheim Bay, Orange County, 1975-1977 (Massey, C. Collins, J. Lindell, M. Silbernagle); and (3) a detailed investigation of the rail population of Tijuana Slough, San Diego County, 1973-1974 (Jorgensen). These, plus short-term studies by the authors and K. Bender, D. Pinkler, P. Johns, and S. Lockhart, have shown that the original estimate was unrealistic. A more probable winter total is 300 rails, distributed as described below.

The commuter rail circulator network design problem : formulation, solution methods, and applications

DOT National Transportation Integrated Search

2007-08-01

Commuter rail is increasingly popular as a means to introduce rail transportation to metropolitan transportation systems. The long-term benefits of commuter rail include the addition of capacity to the transportation system, providing a quality commu...

Using Baltimore HIV behavioral surveillance data for local HIV prevention planning.

PubMed

German, Danielle; Linton, Sabriya; Cassidy-Stewart, Hope; Flynn, Colin

2014-04-01

In response to the National HIV/AIDS Strategy (NHAS) and as part of CDC's Enhanced Comprehensive HIV Prevention Plan (ECHPP) project, Maryland developed a comprehensive local HIV prevention plan for the Baltimore-Towson Metropolitan Statistical Area and identified a series of priority HIV prevention and service goals. The current project sought to: (1) determine how well National HIV Behavioral Surveillance (NHBS) indicators were aligned with NHAS/ECHPP-informed local HIV prevention goals (2) facilitate on-going NHBS data utilization to inform on-going local HIV prevention and service planning, and (3) build a foundation for future NHBS data utilization in local HIV decision-making. Project activities identified key HIV-related indicators in NHBS that are directly or indirectly related to local HIV priorities as informed by NHAS/ECHPP, which can be used for HIV prevention planning in the Baltimore area. Areas for enhancing NHBS and local data collection to further inform HIV prevention priorities are highlighted.

KIPP and Teachers' Union Go Toe to Toe in Baltimore

ERIC Educational Resources Information Center

Zehr, Mary Ann

2011-01-01

Leaders of the Knowledge Is Power Program (KIPP) charter schools are optimistic that they can reach a long-term agreement with the Baltimore (Maryland) Teachers Union in a nationally watched dispute over teacher pay for an extended school day, reducing the likelihood that the charter network will carry out its threat to close its two schools in…

Being a Clinical Psychologist at the Lab School of Baltimore

ERIC Educational Resources Information Center

Oliver, Edwin

2010-01-01

Each day, seeking to address the never ending challenge of helping students with learning disabilities, the author's Baltimore Lab School and Lab School of Washington (LSW) colleagues remember a similar situation in the past and they try to recall what Sally Smith taught them. Smith taught the author a lot in his seven years of working with…

Movements of radio-marked California Ridgway's rails during monitoring surveys: Implications for population monitoring

USGS Publications Warehouse

Bui, Thuy-Vy D.; Takekawa, John Y.; Overton, Cory T.; Schultz, Emily R.; Hull, Joshua M.; Casazza, Michael L.

2015-01-01

The California Ridgway's rail Rallus obsoletus obsoletus (hereafter California rail) is a secretive marsh bird endemic to tidal marshes in the San Francisco Bay (hereafter bay) of California. The California rail has undergone significant range contraction and population declines due to a variety of factors, including predation and the degradation and loss of habitat. Call-count surveys, which include call playbacks, based on the standardized North American marsh bird monitoring protocol have been conducted throughout the bay since 2005 to monitor population size and distribution of the California rail. However, call-count surveys are difficult to evaluate for efficacy or accuracy. To measure the accuracy of call-count surveys and investigate whether radio-marked California rails moved in response to call-count surveys, we compared locations of radio-marked California rails collected at frequent intervals (15 min) to California rail detections recorded during call-count surveys conducted over the same time periods. Overall, 60% of radio-marked California rails within 200 m of observers were not detected during call-count surveys. Movements of radio-marked California rails showed no directional bias (P = 0.92) irrespective of whether or not playbacks of five marsh bird species (including the California rail) were broadcast from listening stations. Our findings suggest that playbacks of rail vocalizations do not consistently influence California rail movements during surveys. However, call-count surveys may underestimate California rail presence; therefore, caution should be used when relating raw numbers of call-count detections to population abundance.