Usability testing for the rest of us: the application of discount usability principles in the development of an online communications assessment application.

PubMed

Brock, Douglas; Kim, Sara; Palmer, Odawni; Gallagher, Thomas; Holmboe, Eric

2013-01-01

Usability evaluation provides developers and educators with the means to understand user needs, improve overall product utility, and increase user satisfaction. The application of "discount usability" principles developed to make usability testing more practical and useful may improve user experience at minimal cost and require little existing expertise to conduct. We describe an application of discount usability to a high-fidelity online communications assessment application developed by the University of Washington for the American Board of Internal Medicine. Eight internal medicine physicians completed a discount usability test. Sessions were recorded and the videos analyzed for significant usability concerns. Concerns were identified, summarized, discussed, and prioritized by the authors in collaboration with the software developers before implementing any changes to the interface. Thirty-eight significant usability issues were detected and four technical problems were identified. Each issue was responded to through modification of the software, by providing additional instruction, or delayed for a later version to be developed. Discount usability can be easily implemented in academic developmental activities. Our study resulted in the discovery and remediation of significant user problems, in addition to giving important insight into the novel methods built into the application.

Development of Usability Criteria for E-Learning Content Development Software

ERIC Educational Resources Information Center

Celik, Serkan

2012-01-01

Revolutionary advancements have been observed in e-learning technologies though an amalgamated evaluation methodology for new generation e-learning content development tools is not available. The evaluation of educational software for online use must consider its usability and as well as its pedagogic effectiveness. This study is a first step…

Usability Considerations in Developing a Graphic Interface for Intra Office Communications

NASA Astrophysics Data System (ADS)

Yammiyavar, Pradeep; Jain, Piyush

This paper outlines the basis of incorporating functional features in a new GUI based software under development for addressing comprehensive communication and interaction needs within an office environment. Bench marking of features in existing communication software products such as Microsoft Outlook, IBM Lotusnotes, Office Communicator, Mozilla Thunderbird etc. was done by asking a set of questions related to the usage of these existing softwares. Usability issues were identified through a user survey involving 30 subjects of varied profiles (domain, designation, age etc.) in a corporate office. It is posited that existing software products that have been developed for a universal market may be highly underutilized or have redundant features especially for use as an intra office (within the same office) communication medium. Simultaneously they may not cater to some very contextual requirements of intra office communications. Based on the findings of the survey of feature preferences & usability of existing products, a simple 'person to person' communicating medium for intra office situations was visualized with a new interactive GUI. Usability issues that need to be considered for a new intra-office product have been brought out.

Usability Testing of a Multimedia e-Learning Resource for Electrolyte and Acid-Base Disorders

ERIC Educational Resources Information Center

Davids, Mogamat Razeen; Chikte, Usuf; Grimmer-Somers, Karen; Halperin, Mitchell L.

2014-01-01

The usability of computer interfaces may have a major influence on learning. Design approaches that optimize usability are commonplace in the software development industry but are seldom used in the development of e-learning resources, especially in medical education. We conducted a usability evaluation of a multimedia resource for teaching…

Usability study of the EduMod eLearning Program for contouring nodal stations of the head and neck.

PubMed

Deraniyagala, Rohan; Amdur, Robert J; Boyer, Arthur L; Kaylor, Scott

2015-01-01

A major strategy for improving radiation oncology education and competence evaluation is to develop eLearning programs that reproduce the real work environment. A valuable measure of the quality of an eLearning program is "usability," which is a multidimensional endpoint defined from the end user's perspective. The gold standard for measuring usability is the Software Usability Measurement Inventory (SUMI). The purpose of this study is to use the SUMI to measure usability of an eLearning course that uses innovative software to teach and test contouring of nodal stations of the head and neck. This is a prospective institutional review board-approved study in which all participants gave written informed consent. The study population was radiation oncology residents from 8 different programs across the United States. The subjects had to pass all sections of the same 2 eLearning modules and then complete the SUMI usability evaluation instrument. We reached the accrual goal of 25 participants. Usability results for the EduMod eLearning course, "Nodal Stations of the Head and Neck," were compared with a large database of scores of other major software programs. Results were evaluated in 5 domains: Affect, Helpfulness, Control, Learnability, and Global Usability. In all 5 domains, usability scores for the study modules were higher than the database mean and statistically superior in 4 domains. This is the first study to evaluate usability of an eLearning program related to radiation oncology. Usability of 2 representative modules related to contouring nodal stations of the head and neck was highly favorable, with scores that were superior to the industry standard in multiple domains. These results support the continued development of this type of eLearning program for teaching and testing radiation oncology technical skills. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

A usability evaluation of medical software at an expert conference setting.

PubMed

Bond, Raymond Robert; Finlay, Dewar D; Nugent, Chris D; Moore, George; Guldenring, Daniel

2014-01-01

A usability test was employed to evaluate two medical software applications at an expert conference setting. One software application is a medical diagnostic tool (electrocardiogram [ECG] viewer) and the other is a medical research tool (electrode misplacement simulator [EMS]). These novel applications have yet to be adopted by the healthcare domain, thus, (1) we wanted to determine the potential user acceptance of these applications and (2) we wanted to determine the feasibility of evaluating medical diagnostic and medical research software at a conference setting as opposed to the conventional laboratory setting. The medical diagnostic tool (ECG viewer) was evaluated using seven delegates and the medical research tool (EMS) was evaluated using 17 delegates that were recruited at the 2010 International Conference on Computing in Cardiology. Each delegate/participant was required to use the software and undertake a set of predefined tasks during the session breaks at the conference. User interactions with the software were recorded using screen-recording software. The 'think-aloud' protocol was also used to elicit verbal feedback from the participants whilst they attempted the pre-defined tasks. Before and after each session, participants completed a pre-test and a post-test questionnaire respectively. The average duration of a usability session at the conference was 34.69 min (SD=10.28). However, taking into account that 10 min was dedicated to the pre-test and post-test questionnaires, the average time dedication to user interaction of the medical software was 24.69 min (SD=10.28). Given we have shown that usability data can be collected at conferences, this paper details the advantages of conference-based usability studies over the laboratory-based approach. For example, given delegates gather at one geographical location, a conference-based usability evaluation facilitates recruitment of a convenient sample of international subject experts. This would otherwise be very expensive to arrange. A conference-based approach also allows for data to be collected over a few days as opposed to months by avoiding administration duties normally involved in laboratory based approach, e.g. mailing invitation letters as part of a recruitment campaign. Following analysis of the user video recordings, 41 (previously unknown) use errors were identified in the advanced ECG viewer and 29 were identified in the EMS application. All use errors were given a consensus severity rating from two independent usability experts. Out of a rating scale of 4 (where 1=cosmetic and 4=critical), the average severity rating for the ECG viewer was 2.24 (SD=1.09) and the average severity rating for the EMS application was 2.34 (SD=0.97). We were also able to extract task completion rates and times from the video recordings to determine the effectiveness of the software applications. For example, six out of seven tasks were completed by all participants when using both applications. This statistic alone suggests both applications already have a high degree of usability. As well as extracting data from the video recordings, we were also able to extract data from the questionnaires. Using a semantic differential scale (where 1=poor and 5=excellent), delegates highly rated the 'responsiveness', 'usefulness', 'learnability' and the 'look and feel' of both applications. This study has shown the potential user acceptance and user-friendliness of the novel EMS and the ECG viewer applications within the healthcare domain. It has also shown that both medical diagnostic software and medical research software can be evaluated for their usability at an expert conference setting. The primary advantage of a conference-based usability evaluation over a laboratory-based evaluation is the high concentration of experts at one location, which is convenient, less time consuming and less expensive. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Evaluating Usability of Radiology Information Systems in Hospitals of Tabriz University of Medical Sciences.

PubMed

Rezaei-Hachesu, Peyman; Pesianian, Esmaeil; Mohammadian, Mohsen

2016-02-01

Radiology information system (RIS) in order to reduce workload and improve the quality of services must be well-designed. Heuristic evaluation is one of the methods that understand usability problems with the least time, cost and resources. The aim of present study is to evaluate the usability of RISs in hospitals. This is a cross-sectional descriptive study (2015) that uses heuristic evaluation method to evaluate the usability of RIS used in 3 hospitals of Tabriz city. The data are collected using a standard checklist based on 13 principles of Nielsen Heuristic evaluation method. Usability of RISs was investigated based on the number of components observed from Nielsen principles and problems of usability based on the number of non-observed components as well as non-existent or unrecognizable components. by evaluation of RISs in each of the hospitals 1, 2 and 3, total numbers of observed components were obtained as 173, 202 and 196, respectively. It was concluded that the usability of RISs in the studied population, on average and with observing 190 components of the 291 components related to the 13 principles of Nielsen is 65.41 %. Furthermore, problems of usability were obtained as 26.35%. The established and visible nature of some components such as response time of application, visual feedbacks, colors, view and design and arrangement of software objects cause more attention to these components as principal components in designing UI software. Also, incorrect analysis before system design leads to a lack of attention to secondary needs like Help software and security issues.

Applying heuristic evaluation to improve the usability of a telemedicine system.

PubMed

Tang, Zhihua; Johnson, Todd R; Tindall, R Douglas; Zhang, Jiajie

2006-02-01

The development of a telemedicine system should not only take advantage of technological advances but also pay close attention to users and the human issues involved. In this paper we examine the utility of heuristic evaluation in improving the usability of a digital emergency medical services (EMS) system equipped on an ambulance. The digital EMS system used advanced communication technologies to help remotely located trauma specialists gain access to patient data in real-time and direct life-saving measures in a timely fashion. To improve its usability, three experts inspected prototypes of the system according to 14 software usability heuristics. The analyses revealed information on the prevalence, severity, and nature of heuristic violations in the user interface design. The results were subsequently utilized to guide the iterative software design process. A comparison between two consecutive prototypes showed that the second design had only half as many usability violations as the first prototype and had considerable improvement in a number of usability heuristic categories. The validity of heuristic evaluation was examined in an ethnographic study of paramedics using a prototype of the system in their work environment. Users' task performances partially verified heuristic evaluation results. However, they also revealed problems that were not identified in heuristic evaluation but only became prominent during field observation. In conclusion, we argue that usability should be given high priority in the development of a telemedicine system, and that heuristic evaluation can be an effective and efficient way to identify usability problems in the early stage of software development.

A usability study of a mobile health application for rural Ghanaian midwives.

PubMed

Vélez, Olivia; Okyere, Portia Boakye; Kanter, Andrew S; Bakken, Suzanne

2014-01-01

Midwives in rural Ghana work at the frontline of the health care system, where they have access to essential data about the patient population. However, current methods of data capture, primarily pen and paper, make the data neither accessible nor usable for monitoring patient care or program evaluation. Electronic health (eHealth) systems present a potential mechanism for enhancing the roles of midwives by providing tools for collecting, exchanging, and viewing patient data as well as offering midwives the possibility for receiving information and decision support. Introducing such technology in low-resource settings has been challenging because of low levels of user acceptance, software design that does not match the end-user environment, and/or unforeseen challenges such as irregular power availability. These challenges are often attributable to a lack of understanding by the software developers of the end users' needs and work environment. A mobile health (mHealth) application known as mClinic was designed to support midwife access to the Millennium Village-Global Network, an eHealth delivery platform that captures data for managing patient care as well as program evaluation and monitoring, decision making, and management. We conducted a descriptive usability study composed of 3 phases to evaluate an mClinic prototype: 1) hybrid lab-live software evaluation of mClinic to identify usability issues; 2) completion of a usability questionnaire; and 3) interviews that included low-fidelity prototyping of new functionality proposed by midwives. The heuristic evaluation identified usability problems related to 4 of 8 usability categories. Analysis of usability questionnaire data indicated that the midwives perceived mClinic as useful but were more neutral about the ease of use. Analysis of midwives' reactions to low-fidelity prototypes during the interview process supported the applicability of mClinic to midwives' work and identified the need for additional functionality. User acceptance is essential for the success of any mHealth implementation. Usability testing identified mClinic development flaws and needed software enhancements. © 2014 by the American College of Nurse-Midwives.

An evaluation method of computer usability based on human-to-computer information transmission model.

PubMed

Ogawa, K

1992-01-01

This paper proposes a new evaluation and prediction method for computer usability. This method is based on our two previously proposed information transmission measures created from a human-to-computer information transmission model. The model has three information transmission levels: the device, software, and task content levels. Two measures, called the device independent information measure (DI) and the computer independent information measure (CI), defined on the software and task content levels respectively, are given as the amount of information transmitted. Two information transmission rates are defined as DI/T and CI/T, where T is the task completion time: the device independent information transmission rate (RDI), and the computer independent information transmission rate (RCI). The method utilizes the RDI and RCI rates to evaluate relatively the usability of software and device operations on different computer systems. Experiments using three different systems, in this case a graphical information input task, confirm that the method offers an efficient way of determining computer usability.

Lessons learned from the usability assessment of home-based telemedicine systems.

PubMed

Agnisarman, Sruthy Orozhiyathumana; Chalil Madathil, Kapil; Smith, Kevin; Ashok, Aparna; Welch, Brandon; McElligott, James T

2017-01-01

At-home telemedicine visits are quickly becoming an acceptable alternative for in-person patient visits. However, little work has been done to understand the usability of these home-based telemedicine solutions. It is critical for user acceptance and real-world applicability to evaluate available telemedicine solutions within the context-specific needs of the users of this technology. To address this need, this study evaluated the usability of four home-based telemedicine software platforms: Doxy.me, Vidyo, VSee, and Polycom. Using a within-subjects experimental design, twenty participants were asked to complete a telemedicine session involving several tasks using the four platforms. Upon completion of these tasks for each platform, participants completed the IBM computer system usability questionnaire (CSUQ) and the NASA Task Load Index test. Upon completing the tasks on all four platforms, the participants completed a final post-test subjective questionnaire ranking the platforms based on their preference. Of the twenty participants, 19 completed the study. Statistically significant differences among the telemedicine software platforms were found for task completion time, total workload, mental demand, effort, frustration, preference ranking and computer system usability scores. Usability problems with installation and account creation led to high mental demand and task completion time, suggesting the participants preferred a system without such requirements. Majority of the usability issues were identified at the telemedicine initiation phase. The findings from this study can be used by software developers to develop user-friendly telemedicine systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Multimedia software to help caregivers cope.

PubMed

Chambers, Mary G; Connor, Samantha L; McGonigle, Mary; Diver, Mike G

2003-01-01

This report describes the design and evaluation of a software application to help carers cope when faced with caring problems and emergencies. The design process involved users at each stage to ensure the content of the software application was appropriate, and the research team carefully considered the requirements of disabled and elderly users. Focus group discussions and individual interviews were conducted in five European countries to ascertain the needs of caregivers in this area. The findings were used to design a three-part multimedia software application to help family caregivers prepare to cope with sudden, unexpected, and difficult situations that may arise during their time as a caregiver. This prototype then was evaluated via user trials and usability questionnaires to consider the usability and acceptance of the application and any changes that may be required. User acceptance of the software application was high, and the key features of usability such as content, appearance, and navigation were highly rated. In general, comments were positive and enthusiastic regarding the content of the software application and relevance to the caring situation. The software application has the potential to offer information and support to those who are caring for the elderly and disabled at home and to help them prepare for a crisis.

Mapping Usability: A Critical Research Analysis of Trends in Software Usability Research, Theory, and Practice

ERIC Educational Resources Information Center

Sousa, Morgan Margaret

2009-01-01

The impetus for this project stemmed from a curiosity about two particular areas in the history of usability research. For one, I began research for this project with a desire to learn about patterns in the theory, practice, attitude, and perception about usability work, both in academic contexts and in corporate contexts, with a focus on the…

Evaluating Usability in a Distance Digital Systems Laboratory Class

ERIC Educational Resources Information Center

Kostaras, N.; Xenos, M.; Skodras, A. N.

2011-01-01

This paper presents the usability evaluation of a digital systems laboratory class offered to distance-learning students. It details the way in which students can participate remotely in such a laboratory, the methodology employed in the usability assessment of the laboratory infrastructure (hardware and software), and also outlines the main…

Using a fuzzy comprehensive evaluation method to determine product usability: A test case

PubMed Central

Zhou, Ronggang; Chan, Alan H. S.

2016-01-01

BACKGROUND: In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. OBJECTIVE AND METHODS: In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. RESULTS AND CONCLUSIONS: This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method. PMID:28035942

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

PubMed

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Qualitative review of usability problems in health information systems for radiology.

PubMed

Dias, Camila Rodrigues; Pereira, Marluce Rodrigues; Freire, André Pimenta

2017-12-01

Radiology processes are commonly supported by Radiology Information System (RIS), Picture Archiving and Communication System (PACS) and other software for radiology. However, these information technologies can present usability problems that affect the performance of radiologists and physicians, especially considering the complexity of the tasks involved. The purpose of this study was to extract, classify and analyze qualitatively the usability problems in PACS, RIS and other software for radiology. A systematic review was performed to extract usability problems reported in empirical usability studies in the literature. The usability problems were categorized as violations of Nielsen and Molich's usability heuristics. The qualitative analysis indicated the causes and the effects of the identified usability problems. From the 431 papers initially identified, 10 met the study criteria. The analysis of the papers identified 90 instances of usability problems, classified into categories corresponding to established usability heuristics. The five heuristics with the highest number of instances of usability problems were "Flexibility and efficiency of use", "Consistency and standards", "Match between system and the real world", "Recognition rather than recall" and "Help and documentation", respectively. These problems can make the interaction time consuming, causing delays in tasks, dissatisfaction, frustration, preventing users from enjoying all the benefits and functionalities of the system, as well as leading to more errors and difficulties in carrying out clinical analyses. Furthermore, the present paper showed a lack of studies performed on systems for radiology, especially usability evaluations using formal methods of evaluation involving the final users. Copyright © 2017 Elsevier Inc. All rights reserved.

Digital casts in orthodontics: a comparison of 4 software systems.

PubMed

Westerlund, Anna; Tancredi, Weronika; Ransjö, Maria; Bresin, Andrea; Psonis, Spyros; Torgersson, Olof

2015-04-01

The introduction of digital cast models is inevitable in the otherwise digitized everyday life of orthodontics. The introduction of this new technology, however, is not straightforward, and selecting an appropriate system can be difficult. The aim of the study was to compare 4 orthodontic digital software systems regarding service, features, and usability. Information regarding service offered by the companies was obtained from questionnaires and Web sites. The features of each software system were collected by exploring the user manuals and the software programs. Replicas of pretreatment casts were sent to Cadent (OrthoCAD; Cadent, Carlstadt, NJ), OthoLab (O3DM; OrthoLab, Poznan, Poland), OrthoProof (DigiModel; OrthoProof, Nieuwegein, The Netherlands), and 3Shape (OrthoAnalyzer; 3Shape, Copenhagen, Denmark). The usability of the programs was assessed by experts in interaction design and usability using the "enhanced cognitive walkthrough" method: 4 tasks were defined and performed by a group of domain experts while they were observed by usability experts. The services provided by the companies were similar. Regarding the features, all 4 systems were able to perform basic measurements; however, not all provided the peer assessment rating index or the American Board of Orthodontics analysis, simulation of the treatment with braces, or digital articulation of the casts. All systems demonstrated weaknesses in usability. However, OrthoCAD and 03DM were considered to be easier to learn for first-time users. In general, the usability of these programs was poor and needs to be further developed. Hands-on training supervised by the program experts is recommended for beginners. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Push for Cheese: A Metaphor for Software Usability

NASA Astrophysics Data System (ADS)

Radziwill, Nicole; Shelton, Amy

2005-12-01

At the National Radio Astronomy Observatory's (NRAO) Science Center in Green Bank, W. Va., visitors curious about radio astronomy and the observatory's history and operations will discover an educational, entertaining experience. Employees also visit the science center, but their thoughts are more on afternoon snacks rather than distant galaxies. The employees of NRAO's Software Development Division in Green Bank have gained tremendous insight on the topic of software usability from many visits to the Science Center Café by pontificating upon the wisdom inherent in the design and use of the liquid cheese dispenser there.

Reusable Software Usability Specifications for mHealth Applications.

PubMed

Cruz Zapata, Belén; Fernández-Alemán, José Luis; Toval, Ambrosio; Idri, Ali

2018-01-25

One of the key factors for the adoption of mobile technologies, and in particular of mobile health applications, is usability. A usable application will be easier to use and understand by users, and will improve user's interaction with it. This paper proposes a software requirements catalog for usable mobile health applications, which can be used for the development of new applications, or the evaluation of existing ones. The catalog is based on the main identified sources in literature on usability and mobile health applications. Our catalog was organized according to the ISO/IEC/IEEE 29148:2011 standard and follows the SIREN methodology to create reusable catalogs. The applicability of the catalog was verified by the creation of an audit method, which was used to perform the evaluation of a real app, S Health, application created by Samsung Electronics Co. The usability requirements catalog, along with the audit method, identified several usability flaws on the evaluated app, which scored 83%. Some flaws were detected in the app related to the navigation pattern. Some more issues related to the startup experience, empty screens or writing style were also found. The way a user navigates through an application improves or deteriorates user's experience with the application. We proposed a reusable usability catalog and an audit method. This proposal was used to evaluate a mobile health application. An audit report was created with the usability issues identified on the evaluated application.

Usability evaluation of mobile applications using ISO 9241 and ISO 25062 standards.

PubMed

Moumane, Karima; Idri, Ali; Abran, Alain

2016-01-01

This paper presents an empirical study based on a set of measures to evaluate the usability of mobile applications running on different mobile operating systems, including Android, iOS and Symbian. The aim is to evaluate empirically a framework that we have developed on the use of the Software Quality Standard ISO 9126 in mobile environments, especially the usability characteristic. To do that, 32 users had participated in the experiment and we have used ISO 25062 and ISO 9241 standards for objective measures by working with two widely used mobile applications: Google Apps and Google Maps. The QUIS 7.0 questionnaire have been used to collect measures assessing the users' level of satisfaction when using these two mobile applications. By analyzing the results we highlighted a set of mobile usability issues that are related to the hardware as well as to the software and that need to be taken into account by designers and developers in order to improve the usability of mobile applications.

47 CFR 1.1409 - Commission consideration of the complaint.

Code of Federal Regulations, 2011 CFR

2011-10-01

... percentage of the total usable space, or the percentage of the total duct or conduit capacity, which is... section: Rate = Space Factor × Cost Where Cost in Urbanized Service Areas = 0.66 × (Net Cost of a Bare... telecommunications carriers: ER29JN01.014 simplified as: ER29JN01.015 If no inner-duct is installed the fraction, “1...

75 FR 14145 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... made in response to usability testing as well as internal review. Changes have also been made to... burden of reporting using the electronic software and improve usability. The affected questions can be...

Usability testing of a prototype multi-user telehealth kiosk.

PubMed

Courtney, Karen L; Matthews, Judith T; McMillan, Julie M; Person Mecca, Laurel; Smailagic, Asim; Siewiorek, Daniel

2015-01-01

The overall purpose of this study was to learn how community-dwelling older adults would interact with our prototype multi-user telehealth kiosk and their views about its usability. Seven subjects participated in laboratory-based usability sessions to evaluate the physical design, appearance, functionality and perceived ease of use of a multi-user telehealth kiosk prototype. During usability testing participants recommended 18 new features (29% of comments), identified 15 software errors (23% of comments) and 29 user interface errors (47% of comments).

Improving the accuracy and usability of Iowa falling weight deflectometer data.

DOT National Transportation Integrated Search

2013-05-01

This study aims to improve the accuracy and usability of Iowa Falling Weight Deflectometer (FWD) data by incorporating significant : enhancements into the fully-automated software system for rapid processing of the FWD data. These enhancements includ...

Usability Evaluation at the Point-of-Care: A Method to Identify User Information Needs in CPOE Applications

PubMed Central

Washburn, Jeff; Fiol, Guilherme Del; Rocha, Roberto A.

2006-01-01

Point of care usability evaluation may help identify information needs that occur during the process of providing care. We describe the process of using usability-specific recording software to record Computerized Physician Order Entry (CPOE) ordering sessions on admitted adult and pediatric patients at two urban tertiary hospitals in the Intermountain Healthcare system of hospitals. PMID:17238756

Usability in Mobile Electronic Data Collection Tools: Form Developers' Views.

PubMed

Mugisha, Alice; Babic, Ankica; Wakholi, Peter; Nankabirwa, Victoria; Tylleskar, Thorkild

2017-01-01

Mobile Electronic Data Collection Tools (MEDCTs) are created by form developers to collect data. Usability being one of the top quality attributes is of great concern to developers of any interactive applications. However, little is known about the form developers' understanding of usability, how they measure usability and their limitations in designing for usability. We conducted an empirical study where we aimed at getting the developers' views on usability by interviewing 8 form developers. These are creators of forms used for data collection. We found that developers knew about usability, but it was not their main focus during form development. Challenges included constraining deadlines, software limitations and the insufficient communication with the field users to establish the usability needs. Furthermore, the methods used to evaluate the usability of created forms varied amongst developers and these included in-house evaluations and feedback from piloting sessions with end users.

A Management Information System for Bare Base Civil Engineering Commanders

DTIC Science & Technology

1988-09-01

initial beddown stage. The purpose of this research was to determine the feasibility of developing a microcomputer based management information system (MIS...the software best suited to synthesize four of the categories into a prototype field MIS. Keyword: Management information system , Bare bases, Civil engineering, Data bases, Information retrieval.

Harnessing scientific literature reports for pharmacovigilance. Prototype software analytical tool development and usability testing.

PubMed

Sorbello, Alfred; Ripple, Anna; Tonning, Joseph; Munoz, Monica; Hasan, Rashedul; Ly, Thomas; Francis, Henry; Bodenreider, Olivier

2017-03-22

We seek to develop a prototype software analytical tool to augment FDA regulatory reviewers' capacity to harness scientific literature reports in PubMed/MEDLINE for pharmacovigilance and adverse drug event (ADE) safety signal detection. We also aim to gather feedback through usability testing to assess design, performance, and user satisfaction with the tool. A prototype, open source, web-based, software analytical tool generated statistical disproportionality data mining signal scores and dynamic visual analytics for ADE safety signal detection and management. We leveraged Medical Subject Heading (MeSH) indexing terms assigned to published citations in PubMed/MEDLINE to generate candidate drug-adverse event pairs for quantitative data mining. Six FDA regulatory reviewers participated in usability testing by employing the tool as part of their ongoing real-life pharmacovigilance activities to provide subjective feedback on its practical impact, added value, and fitness for use. All usability test participants cited the tool's ease of learning, ease of use, and generation of quantitative ADE safety signals, some of which corresponded to known established adverse drug reactions. Potential concerns included the comparability of the tool's automated literature search relative to a manual 'all fields' PubMed search, missing drugs and adverse event terms, interpretation of signal scores, and integration with existing computer-based analytical tools. Usability testing demonstrated that this novel tool can automate the detection of ADE safety signals from published literature reports. Various mitigation strategies are described to foster improvements in design, productivity, and end user satisfaction.

Ten recommendations for software engineering in research.

PubMed

Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

2014-01-01

Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

Virtually Usable: A Test of the Information Gardens

ERIC Educational Resources Information Center

Johnson, Megan; Ochoa, Louise; Purpur, Geraldine

2007-01-01

This paper presents the results of a usability study conducted to determine the functionality of a desktop, three-dimensional virtual library designed and supported by the Appalachian State University Distance Learning Library Services team. Formative evaluations were performed with representative students utilizing Morae software. Results…

Usability analysis of 2D graphics software for designing technical clothing.

PubMed

Teodoroski, Rita de Cassia Clark; Espíndola, Edilene Zilma; Silva, Enéias; Moro, Antônio Renato Pereira; Pereira, Vera Lucia D V

2012-01-01

With the advent of technology, the computer became a working tool increasingly present in companies. Its purpose is to increase production and reduce the inherent errors in manual production. The aim of this study was to analyze the usability of 2D graphics software in creating clothing designs by a professional during his work. The movements of the mouse, keyboard and graphical tools were monitored in real time by software Camtasia 7® installed on the user's computer. To register the use of mouse and keyboard we used auxiliary software called MouseMeter®, which quantifies the number of times they pressed the right, middle and left mouse's buttons, the keyboard and also the distance traveled in meters by the cursor on the screen. Data was collected in periods of 15 minutes, 1 hour and 8 hours, consecutively. The results showed that the job is considered repetitive and high demands physical efforts, which can lead to the appearance of repetitive strain injuries. Thus, the goal of minimizing operator efforts and thereby enhance the usability of the examined tool, becomes imperative to replace the mouse by a device called tablet, which also offers an electronic pen and a drawing platform for design development.

Effectiveness and usability of Scanning Wizard software: a tool for enhancing switch scanning.

PubMed

Koester, Heidi Horstmann; Simpson, Richard C

2017-11-24

Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study evaluated Scanning Wizard's effectiveness and usability. Ten people who use switch scanning and ten practitioners used Scanning Wizard in the initial session. Usability was high, based on survey responses averaging over 4.5 out of 5, and qualitative feedback was very positive. Five switch users were able to complete the multi-week protocol, using settings on their own scanning system that were recommended from the Scanning Wizard session. Using these revised settings, text entry rates improved by an average of 71%, ranging from 29% to 172% improvement. Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate. Implications for Rehabilitation Some individuals with severe physical impairments use switch scanning for spoken and written communication. Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study demonstrated high usability of Scanning Wizard (with 10 switch userpractitioner teams) and increased text entry rate by an average of 71% (for five switch users). Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate.

Advancing Usability Evaluation through Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring; David I. Gertman

2005-07-01

This paper introduces a novel augmentation to the current heuristic usability evaluation methodology. The SPAR-H human reliability analysis method was developed for categorizing human performance in nuclear power plants. Despite the specialized use of SPAR-H for safety critical scenarios, the method also holds promise for use in commercial off-the-shelf software usability evaluations. The SPAR-H method shares task analysis underpinnings with human-computer interaction, and it can be easily adapted to incorporate usability heuristics as performance shaping factors. By assigning probabilistic modifiers to heuristics, it is possible to arrive at the usability error probability (UEP). This UEP is not a literal probabilitymore » of error but nonetheless provides a quantitative basis to heuristic evaluation. When combined with a consequence matrix for usability errors, this method affords ready prioritization of usability issues.« less

Design Implications from a Usability Study of GramStain-Tutor.

ERIC Educational Resources Information Center

Kim, Sara; Brock, Douglas; Orkand, Adam; Astion, Michael

2001-01-01

Describes a usability study conducted with health sciences students at the University of Washington that explored interface issues in the GramStain Tutor, an educational software program on CD-ROM, particularly the navigation of the program and the use of embedded design features. (LRW)

Software Engineering Program: Software Process Improvement Guidebook

NASA Technical Reports Server (NTRS)

1996-01-01

The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

Distributed Collaborative Homework Activities in a Problem-Based Usability Engineering Course

ERIC Educational Resources Information Center

Carroll, John M.; Jiang, Hao; Borge, Marcela

2015-01-01

Teams of students in an upper-division undergraduate Usability Engineering course used a collaborative environment to carry out a series of three distributed collaborative homework assignments. Assignments were case-based analyses structured using a jigsaw design; students were provided a collaborative software environment and introduced to a…

Usability and Instructional Design Heuristics for E-Learning Evaluation.

ERIC Educational Resources Information Center

Reeves, Thomas C.; Benson, Lisa; Elliott, Dean; Grant, Michael; Holschuh, Doug; Kim, Beaumie; Kim, Hyeonjin; Lauber, Erick; Loh, Sebastian

Heuristic evaluation is a methodology for investigating the usability of software originally developed by Nielsen (1993, 2000). Nielsen's protocol was modified and refined for evaluating e-learning programs by participants in a doctoral seminar held at the University of Georgia in 2001. The modifications primarily involved expanding Nielsen's…

Post-Mission Assessment for Tactical Training-Trends Analysis (PMATT-TA): Usability Analysis Report

DTIC Science & Technology

2014-07-01

information, PMATT-TA also supports data calls to understand fleet readiness and proficiency. Additionally, PMATT-TA addresses a need for a digitally based...Software Quality Journal, 4(2), 115-130. Gray, W. D., & Salzman, M. C. (1998). Damaged merchandise ? A review of experiments that compare usability

Educational software usability: Artifact or Design?

PubMed

Van Nuland, Sonya E; Eagleson, Roy; Rogers, Kem A

2017-03-01

Online educational technologies and e-learning tools are providing new opportunities for students to learn worldwide, and they continue to play an important role in anatomical sciences education. Yet, as we shift to teaching online, particularly within the anatomical sciences, it has become apparent that e-learning tool success is based on more than just user satisfaction and preliminary learning outcomes-rather it is a multidimensional construct that should be addressed from an integrated perspective. The efficiency, effectiveness and satisfaction with which a user can navigate an e-learning tool is known as usability, and represents a construct which we propose can be used to quantitatively evaluate e-learning tool success. To assess the usability of an e-learning tool, usability testing should be employed during the design and development phases (i.e., prior to its release to users) as well as during its delivery (i.e., following its release to users). However, both the commercial educational software industry and individual academic developers in the anatomical sciences have overlooked the added value of additional usability testing. Reducing learner frustration and anxiety during e-learning tool use is essential in ensuring e-learning tool success, and will require a commitment on the part of the developers to engage in usability testing during all stages of an e-learning tool's life cycle. Anat Sci Educ 10: 190-199. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

A human reliability based usability evaluation method for safety-critical software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, R. L.; Tran, T. Q.; Gertman, D. I.

2006-07-01

Boring and Gertman (2005) introduced a novel method that augments heuristic usability evaluation methods with that of the human reliability analysis method of SPAR-H. By assigning probabilistic modifiers to individual heuristics, it is possible to arrive at the usability error probability (UEP). Although this UEP is not a literal probability of error, it nonetheless provides a quantitative basis to heuristic evaluation. This method allows one to seamlessly prioritize and identify usability issues (i.e., a higher UEP requires more immediate fixes). However, the original version of this method required the usability evaluator to assign priority weights to the final UEP, thusmore » allowing the priority of a usability issue to differ among usability evaluators. The purpose of this paper is to explore an alternative approach to standardize the priority weighting of the UEP in an effort to improve the method's reliability. (authors)« less

Users Do the Darndest Things: True Stories from the CyLab Usable Privacy and Security Laboratory

NASA Astrophysics Data System (ADS)

Cranor, Lorrie Faith

How can we make security and privacy software more usable? The first step is to study our users. Ideally, we would watch them interacting with security or privacy software in situations where they face actual risk. But everyday computer users don't sit around fiddling with security software, and subjecting users to actual security attacks raises ethical and legal concerns. Thus, it can be difficult to observe users interacting with security and privacy software in their natural habitat. At the CyLab Usable Privacy and Security Laboratory, we've conducted a wide variety of studies aimed at understanding how users think about security and privacy and how they interact with security and privacy software. In this talk I'll give a behind the scenes tour of some of the techniques we've used to study users both in the laboratory and in the wild. I'll discuss the trials and tribulations of designing and carrying out security and privacy user studies, and highlight some of our surprising observations. Find out what privacy-sensitive items you can actually get study participants to purchase, how you can observe users' responses to a man-in-the-middle attack without actually conducting such an attack, why it's hard to get people to use high tech cell phones even when you give them away, and what's actually in that box behind the couch in my office.

Earthdata User Interface Patterns: Building Usable Web Interfaces Through a Shared UI Pattern Library

NASA Astrophysics Data System (ADS)

Siarto, J.

2014-12-01

As more Earth science software tools and services move to the web--the design and usability of those tools become ever more important. A good user interface is becoming expected and users are becoming increasingly intolerant of websites and web applications that work against them. The Earthdata UI Pattern Library attempts to give these scientists and developers the design tools they need to make usable, compelling user interfaces without the associated overhead of using a full design team. Patterns are tested and functional user interface elements targeted specifically at the Earth science community and will include web layouts, buttons, tables, typography, iconography, mapping and visualization/graphing widgets. These UI elements have emerged as the result of extensive user testing, research and software development within the NASA Earthdata team over the past year.

Computer Center: Software Review.

ERIC Educational Resources Information Center

Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

1988-01-01

Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

Development of the Telehealth Usability Questionnaire (TUQ).

PubMed

Parmanto, Bambang; Lewis, Allen Nelson; Graham, Kristin M; Bertolet, Marnie H

2016-01-01

Current telehealth usability questionnaires are designed primarily for older technologies, where telehealth interaction is conducted over dedicated videoconferencing applications. However, telehealth services are increasingly conducted over computer-based systems that rely on commercial software and a user supplied computer interface. Therefore, a usability questionnaire that addresses the changes in telehealth service delivery and technology is needed. The Telehealth Usability Questionnaire (TUQ) was developed to evaluate the usability of telehealth implementation and services. This paper addresses: (1) the need for a new measure of telehealth usability, (2) the development of the TUQ, (3) intended uses for the TUQ, and (4) the reliability of the TUQ. Analyses indicate that the TUQ is a solid, robust, and versatile measure that can be used to measure the quality of the computer-based user interface and the quality of the telehealth interaction and services.

Effective Usability Engineering in Healthcare: A Vision of Usable and Safer Healthcare IT.

PubMed

Kushniruk, Andre; Senathirajah, Yalini; Borycki, Elizabeth

2017-01-01

Persistent problems with healthcare IT that is unusable and unsafe have been reported worldwide. In this paper we present our vision for deploying usability engineering in healthcare in a more substantive way in order to improve the current situation. The argument will be made that stronger and more substantial efforts need to be made to bring multiple usability engineering methods to bear on points in both system design and deployment (and not just as a one-time effort restricted to software product development). In addition, improved processes for ensuring the usability of commercial vendor-based systems being implemented in healthcare organizations need to be addressed. A discussion will also be provided on challenges and barriers that will need to be overcome to ensure that the heatlhcare IT that is released is both usable and safe.

Eliciting and Analyzing Quality Requirements: Management Influences on Software Quality Requirements

DTIC Science & Technology

2005-03-01

their portable devices [ Balfanz 04] can be applied to many of the quality requirements issues within the development life cycle: " Neither usability or...Systems. New York, NY: Wiley Computer Publishing, 2001. [ Balfanz 04] Balfanz , D.; Durfee, G; & Smetters, D. K. "Search of Usable Security: Five Lessons from

The Portable Usability Testing Lab: A Flexible Research Tool.

ERIC Educational Resources Information Center

Hale, Michael E.; And Others

A group of faculty at the University of Georgia obtained funding for a research and development facility called the Learning and Performance Support Laboratory (LPSL). One of the LPSL's primary needs was obtaining a portable usability lab for software testing, so the facility obtained the "Luggage Lab 2000." The lab is transportable to…

Pedagogical Usability of the Geometer's Sketchpad (GSP) Digital Module in the Mathematics Teaching

ERIC Educational Resources Information Center

Nordin, Norazah; Zakaria, Effandi; Mohamed, Nik Rahimah Nik; Embi, Mohamed Amin

2010-01-01

Teacher played an important role in ascertaining effective teaching of mathematics. The objective of this paper was to investigate the pedagogical usability of a digital module prototype that integrated a dynamic geometry software, Geometer's Sketchpad (GSP) in mathematics teaching. The prototype was developed based on Reiser's and Dick's…

Evaluating the Usability of Pinchigator, a system for Navigating Virtual Worlds using Pinch Gloves

NASA Technical Reports Server (NTRS)

Hamilton, George S.; Brookman, Stephen; Dumas, Joseph D. II; Tilghman, Neal

2003-01-01

Appropriate design of two dimensional user interfaces (2D U/I) utilizing the well known WIMP (Window, Icon, Menu, Pointing device) environment for computer software is well studied and guidance can be found in several standards. Three-dimensional U/I design is not nearly so mature as 2D U/I, and standards bodies have not reached consensus on what makes a usable interface. This is especially true when the tools for interacting with the virtual environment may include stereo viewing, real time trackers and pinch gloves instead of just a mouse & keyboard. Over the last several years the authors have created a 3D U/I system dubbed Pinchigator for navigating virtual worlds based on the dVise dV/Mockup visualization software, Fakespace Pinch Gloves and Pohlemus trackers. The current work is to test the usability of the system on several virtual worlds, suggest improvements to increase Pinchigator s usability, and then to generalize about what was learned and how those lessons might be applied to improve other 3D U/I systems.

Usability of Low-Cost Android Data Collection System for Community-Based Participatory Research.

PubMed

Salihu, Hamisu M; Salinas-Miranda, Abraham; Turner, DeAnne; King, Lindsey; Paothong, Arnut; Austin, Deborah; Berry, Estrellita Lo

2016-01-01

Android tablet computers can be valuable tools for data collection, but their usability has not been evaluated in community-based participatory research (CBPR). This article examines the usability of a low-cost bilingual touchscreen computerized survey system using Android tablets, piloted with a sample of 201 community residents in Tampa, Florida, from November 2013 to March 2014. Needs assessment questions were designed with the droidSURVEY software, and deployed using Android tablet computers. In addition, participants were asked questions about system usability. The mean system usability was 77.57 ± 17.66 (range, 0-100). The mean completion time for taking the 63 survey questions in the needs assessment was 23.11 ± 9.62 minutes. The survey completion rate was optimal (100%), with only 6.34% missingness per variable. We found no sociodemographic differences in usability scores. Our findings indicate that Android tablets could serve as useful tools in CBPR studies.

Usability engineering: domain analysis activities for augmented-reality systems

NASA Astrophysics Data System (ADS)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

Evaluate the Usability of the Mobile Instant Messaging Software in the Elderly.

PubMed

Wen, Tzu-Ning; Cheng, Po-Liang; Chang, Po-Lun

2017-01-01

Instant messaging (IM) is one kind of online chat that provides real-time text transmission over the Internet. It becomes one of the popular communication tools. Even it is currnetly an era of smartphones, it still a great challenge to teach and promote the elderly to use smart phone. Besides, the acceptance of the elderly to use IM remains unknown. This study describes the usability and evaluates the acceptance of the IM in the elderly, who use the smartphone for the first time. This study is a quasi-experimental design study. The study period started from October, 2012 to December, 2013. There were totally 41 elderly recruited in the study. All of them were the first time to use LINE app on the smartphones. The usability was evaluated by using the Technology Acceptance Model which consisted of four constructs: cognitive usability, cognitive ease of use, attitude and willingness to use. Overall, the elderly had the best "attitude" for LINE APP communication software, with the highest rating averaging 4.07 points on four constructs, followed by an average of 4 points on "cognitive usefulness". The socres of "cognitive ease of use" and "willingness to use" scores were equal which are an average score of 3.86. It can be interpreted that (1) the elders thought that the LINE APP as an excellent communication tool for them; (2) they found the software is useful (3) it was convenient for them to communicate. However, it was necessary to additionally assist and explain the certain functions such as the options. It would play a great role in the "willingness to use". The positive acceptance of LINE APP in elderly refer to the probable similar acceptance for them to use other communication software. Encouraging the willingness the elderly to explore more technology products and understanding their behavior will be the basic knowledge to develop further software.

Current State of Agile User-Centered Design: A Survey

NASA Astrophysics Data System (ADS)

Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

Usability Evaluation of a Private Social Network on Mental Health for Relatives.

PubMed

Toribio-Guzmán, José Miguel; García-Holgado, Alicia; Soto Pérez, Felipe; García-Peñalvo, Francisco J; Franco Martín, Manuel

2017-09-01

Usability is one of the most prominent criteria that must be fulfilled by a software product. This study aims to evaluate the usability of SocialNet, a private social network for monitoring the daily progress of patients by their relatives, using a mixed usability approach: heuristic evaluation conducted by experts and user testing. A double heuristic evaluation with one expert evaluator identified the issues related to consistency, design, and privacy. User testing was conducted on 20 users and one evaluator using observation techniques and questionnaires. The main usability problems were found to be related to the structure of SocialNet, and the users presented some difficulties in locating the buttons or links. The results show a high level of usability and satisfaction with the product. This evaluation provides data on the usability of SocialNet based on the difficulties experienced by the users and the expert. The results help in redesigning the tool to resolve the identified problems as part of an iterative process.

Outcomes with various drug eluting or bare metal stents in patients with diabetes mellitus: mixed treatment comparison analysis of 22 844 patient years of follow-up from randomised trials

PubMed Central

Kumar, Sunil; Fusaro, Mario; Amoroso, Nicholas; Kirtane, Ajay J; Byrne, Robert A; Williams, David O; Slater, James; Cutlip, Donald E; Feit, Frederick

2012-01-01

Objectives To evaluate the efficacy and safety of currently used drug eluting stents compared with each other and compared with bare metal stents in patients with diabetes. Design Mixed treatment comparison meta-analysis. Data sources and study selection PubMed, Embase, and CENTRAL were searched for randomised clinical trials, until April 2012, of four durable polymer drug eluting stents (sirolimus eluting stents, paclitaxel eluting stents, everolimus eluting stents, and zotarolimus eluting stents) compared with each other or with bare metal stents for the treatment of de novo coronary lesions and enrolling at least 50 patients with diabetes. Primary outcomes Efficacy (target vessel revascularisation) and safety (death, myocardial infarction, stent thrombosis). Results From 42 trials with 22 844 patient years of follow-up, when compared with bare metal stents (reference rate ratio 1) all of the currently used drug eluting stents were associated with a significant reduction in target vessel revascularisation (37% to 69%), though the efficacy varied with the type of stent (everolimus eluting stents∼sirolimus eluting stents>paclitaxel eluting stents∼zotarolimus eluting stent>bare metal stents). There was about an 87% probability that everolimus eluting stents were the most efficacious compared with all others, though there were limited usable data for the zotarolimus eluting Resolute stent in patients with diabetes. Moreover, there was no increased risk of any safety outcome (including very late stent thrombosis) with any drug eluting stents compared with bare metal stents. There was about a 62% probability that the everolimus eluting stent was the safest stent for the outcome of “any” stent thrombosis. Conclusions Among patients with diabetes treated with coronary stents all currently available drug eluting stents were efficacious without compromising safety compared with bare metal stents. There were relative differences among the drug eluting stents, such that the everolimus eluting stent was the most efficacious and safe. PMID:22885395

ERP Software Implementation Best Practices.

ERIC Educational Resources Information Center

Frantz, Pollyanne S.; Southerland, Arthur R.; Johnson, James T.

2002-01-01

Studied the perceptions of chief financial and information officers of enterprise resource planning (ERP) software implementation best practices. Usable responses from 159 respondents show consensus for the most part between the perceptions of the two groups and describe some best practices that represent common ground. (SLD)

Evaluation of expert system application based on usability aspects

NASA Astrophysics Data System (ADS)

Munaiseche, C. P. C.; Liando, O. E. S.

2016-04-01

Usability usually defined as a point of human acceptance to a product or a system based on understands and right reaction to an interface. The performance of web application has been influence by the quality of the interface of that web to supporting information transfer process. Preferably, before the applications of expert systems were installed in the operational environment, these applications must be evaluated first by usability testing. This research aimed to measure the usability of the expert system application using tasks as interaction media. This study uses an expert system application to diagnose skin disease in human using questionnaire method which utilize the tasks as interaction media in measuring the usability. Certain tasks were executed by the participants in observing usability value of the application. The usability aspects observed were learnability, efficiency, memorability, errors, and satisfaction. Each questionnaire question represent aspects of usability. The results present the usability value for each aspect and the total average merit for all the five-usability aspect was 4.28, this indicated that the tested expert system application is in the range excellent for the usability level, so the application can be implemented as the operated system by user. The main contribution of the study is the research became the first step in using task model in the usability evaluation for the expert system application software.

A workflow learning model to improve geovisual analytics utility

PubMed Central

Roth, Robert E; MacEachren, Alan M; McCabe, Craig A

2011-01-01

Introduction This paper describes the design and implementation of the G-EX Portal Learn Module, a web-based, geocollaborative application for organizing and distributing digital learning artifacts. G-EX falls into the broader context of geovisual analytics, a new research area with the goal of supporting visually-mediated reasoning about large, multivariate, spatiotemporal information. Because this information is unprecedented in amount and complexity, GIScientists are tasked with the development of new tools and techniques to make sense of it. Our research addresses the challenge of implementing these geovisual analytics tools and techniques in a useful manner. Objectives The objective of this paper is to develop and implement a method for improving the utility of geovisual analytics software. The success of software is measured by its usability (i.e., how easy the software is to use?) and utility (i.e., how useful the software is). The usability and utility of software can be improved by refining the software, increasing user knowledge about the software, or both. It is difficult to achieve transparent usability (i.e., software that is immediately usable without training) of geovisual analytics software because of the inherent complexity of the included tools and techniques. In these situations, improving user knowledge about the software through the provision of learning artifacts is as important, if not more so, than iterative refinement of the software itself. Therefore, our approach to improving utility is focused on educating the user. Methodology The research reported here was completed in two steps. First, we developed a model for learning about geovisual analytics software. Many existing digital learning models assist only with use of the software to complete a specific task and provide limited assistance with its actual application. To move beyond task-oriented learning about software use, we propose a process-oriented approach to learning based on the concept of scientific workflows. Second, we implemented an interface in the G-EX Portal Learn Module to demonstrate the workflow learning model. The workflow interface allows users to drag learning artifacts uploaded to the G-EX Portal onto a central whiteboard and then annotate the workflow using text and drawing tools. Once completed, users can visit the assembled workflow to get an idea of the kind, number, and scale of analysis steps, view individual learning artifacts associated with each node in the workflow, and ask questions about the overall workflow or individual learning artifacts through the associated forums. An example learning workflow in the domain of epidemiology is provided to demonstrate the effectiveness of the approach. Results/Conclusions In the context of geovisual analytics, GIScientists are not only responsible for developing software to facilitate visually-mediated reasoning about large and complex spatiotemporal information, but also for ensuring that this software works. The workflow learning model discussed in this paper and demonstrated in the G-EX Portal Learn Module is one approach to improving the utility of geovisual analytics software. While development of the G-EX Portal Learn Module is ongoing, we expect to release the G-EX Portal Learn Module by Summer 2009. PMID:21983545

A workflow learning model to improve geovisual analytics utility.

PubMed

Roth, Robert E; Maceachren, Alan M; McCabe, Craig A

2009-01-01

INTRODUCTION: This paper describes the design and implementation of the G-EX Portal Learn Module, a web-based, geocollaborative application for organizing and distributing digital learning artifacts. G-EX falls into the broader context of geovisual analytics, a new research area with the goal of supporting visually-mediated reasoning about large, multivariate, spatiotemporal information. Because this information is unprecedented in amount and complexity, GIScientists are tasked with the development of new tools and techniques to make sense of it. Our research addresses the challenge of implementing these geovisual analytics tools and techniques in a useful manner. OBJECTIVES: The objective of this paper is to develop and implement a method for improving the utility of geovisual analytics software. The success of software is measured by its usability (i.e., how easy the software is to use?) and utility (i.e., how useful the software is). The usability and utility of software can be improved by refining the software, increasing user knowledge about the software, or both. It is difficult to achieve transparent usability (i.e., software that is immediately usable without training) of geovisual analytics software because of the inherent complexity of the included tools and techniques. In these situations, improving user knowledge about the software through the provision of learning artifacts is as important, if not more so, than iterative refinement of the software itself. Therefore, our approach to improving utility is focused on educating the user. METHODOLOGY: The research reported here was completed in two steps. First, we developed a model for learning about geovisual analytics software. Many existing digital learning models assist only with use of the software to complete a specific task and provide limited assistance with its actual application. To move beyond task-oriented learning about software use, we propose a process-oriented approach to learning based on the concept of scientific workflows. Second, we implemented an interface in the G-EX Portal Learn Module to demonstrate the workflow learning model. The workflow interface allows users to drag learning artifacts uploaded to the G-EX Portal onto a central whiteboard and then annotate the workflow using text and drawing tools. Once completed, users can visit the assembled workflow to get an idea of the kind, number, and scale of analysis steps, view individual learning artifacts associated with each node in the workflow, and ask questions about the overall workflow or individual learning artifacts through the associated forums. An example learning workflow in the domain of epidemiology is provided to demonstrate the effectiveness of the approach. RESULTS/CONCLUSIONS: In the context of geovisual analytics, GIScientists are not only responsible for developing software to facilitate visually-mediated reasoning about large and complex spatiotemporal information, but also for ensuring that this software works. The workflow learning model discussed in this paper and demonstrated in the G-EX Portal Learn Module is one approach to improving the utility of geovisual analytics software. While development of the G-EX Portal Learn Module is ongoing, we expect to release the G-EX Portal Learn Module by Summer 2009.

Design and evaluation of a software prototype for participatory planning of environmental adaptations.

PubMed

Eriksson, J; Ek, A; Johansson, G

2000-03-01

A software prototype to support the planning process for adapting home and work environments for people with physical disabilities was designed and later evaluated. The prototype exploits low-cost three-dimensional (3-D) graphics products in the home computer market. The essential features of the prototype are: interactive rendering with optional hardware acceleration, interactive walk-throughs, direct manipulation tools for moving objects and measuring distances, and import of 3-D-objects from a library. A usability study was conducted, consisting of two test sessions (three weeks apart) and a final interview. The prototype was then tested and evaluated by representatives of future users: five occupational therapist students, and four persons with physical disability, with no previous experience of the prototype. Emphasis in the usability study was placed on the prototype's efficiency and learnability. We found that it is possible to realise a planning tool for environmental adaptations, both regarding usability and technical efficiency. The usability evaluation confirms our findings from previous case studies, regarding the relevance and positive attitude towards this kind of planning tool. Although the prototype was found to be satisfactorily efficient for the basic tasks, the paper presents several suggestions for improvement of future prototype versions.

Review of free software tools for image analysis of fluorescence cell micrographs.

PubMed

Wiesmann, V; Franz, D; Held, C; Münzenmayer, C; Palmisano, R; Wittenberg, T

2015-01-01

An increasing number of free software tools have been made available for the evaluation of fluorescence cell micrographs. The main users are biologists and related life scientists with no or little knowledge of image processing. In this review, we give an overview of available tools and guidelines about which tools the users should use to segment fluorescence micrographs. We selected 15 free tools and divided them into stand-alone, Matlab-based, ImageJ-based, free demo versions of commercial tools and data sharing tools. The review consists of two parts: First, we developed a criteria catalogue and rated the tools regarding structural requirements, functionality (flexibility, segmentation and image processing filters) and usability (documentation, data management, usability and visualization). Second, we performed an image processing case study with four representative fluorescence micrograph segmentation tasks with figure-ground and cell separation. The tools display a wide range of functionality and usability. In the image processing case study, we were able to perform figure-ground separation in all micrographs using mainly thresholding. Cell separation was not possible with most of the tools, because cell separation methods are provided only by a subset of the tools and are difficult to parametrize and to use. Most important is that the usability matches the functionality of a tool. To be usable, specialized tools with less functionality need to fulfill less usability criteria, whereas multipurpose tools need a well-structured menu and intuitive graphical user interface. © 2014 Fraunhofer-Institute for Integrated Circuits IIS Journal of Microscopy © 2014 Royal Microscopical Society.

Usability of a real-time tracked augmented reality display system in musculoskeletal injections

NASA Astrophysics Data System (ADS)

Baum, Zachary; Ungi, Tamas; Lasso, Andras; Fichtinger, Gabor

2017-03-01

PURPOSE: Image-guided needle interventions are seldom performed with augmented reality guidance in clinical practice due to many workspace and usability restrictions. We propose a real-time optically tracked image overlay system to make image-guided musculoskeletal injections more efficient and assess its usability in a bed-side clinical environment. METHODS: An image overlay system consisting of an optically tracked viewbox, tablet computer, and semitransparent mirror allows users to navigate scanned patient volumetric images in real-time using software built on the open-source 3D Slicer application platform. A series of experiments were conducted to evaluate the latency and screen refresh rate of the system using different image resolutions. To assess the usability of the system and software, five medical professionals were asked to navigate patient images while using the overlay and completed a questionnaire to assess the system. RESULTS: In assessing the latency of the system with scanned images of varying size, screen refresh rates were approximately 5 FPS. The study showed that participants found using the image overlay system easy, and found the table-mounted system was significantly more usable and effective than the handheld system. CONCLUSION: It was determined that the system performs comparably with scanned images of varying size when assessing the latency of the system. During our usability study, participants preferred the table-mounted system over the handheld. The participants also felt that the system itself was simple to use and understand. With these results, the image overlay system shows promise for use in a clinical environment.

Beyond Effectiveness: A Pragmatic Evaluation Framework for Learning and Continuous Quality Improvement of e-Learning Interventions in Healthcare.

PubMed

Dafalla, Tarig Dafalla Mohamed; Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

A pragmatic evaluation framework for evaluating the usability and usefulness of an e-learning intervention for a patient clinical information scheduling system is presented in this paper. The framework was conceptualized based on two different but related concepts (usability and usefulness) and selection of appropriate and valid methods of data collection and analysis that included: (1) Low-Cost Rapid Usability Engineering (LCRUE), (2) Cognitive Task Analysis (CTA), (3) Heuristic Evaluation (HE) criteria for web-based learning, and (4) Software Usability Measurement Inventory (SUMI). The results of the analysis showed some areas where usability that were related to General Interface Usability (GIU), instructional design and content was problematic; some of which might account for the poorly rated aspects of usability when subjectively measured. This paper shows that using a pragmatic framework can be a useful way, not only for measuring the usability and usefulness, but also for providing a practical objective evidences for learning and continuous quality improvement of e-learning systems. The findings should be of interest to educators, developers, designers, researchers, and usability practitioners involved in the development of e-learning systems in healthcare. This framework could be an appropriate method for assessing the usability, usefulness and safety of health information systems both in the laboratory and in the clinical context.

Usability and Culture as Two of the Value Criteria for Evaluating the Artifact

NASA Astrophysics Data System (ADS)

Kurosu, Masaaki

In this paper, the conceptual framework of the Artifact Development Analysis (ADA) and its relationship to the usability engineering are outlined. The ADA analyses the significance of all artifacts including hardware, software, humanware and system. Its viewpoint extends both in temporal and spatial dimensions. In short, it deals with the diversity of the artifact and casts the questions "why it is so" and "why it is not so". In this respect, the ADA is related to the usability engineering as one of the value attitudes. The usability engineering puts emphasis on effectiveness and efficiency. The usability is not always the value criterion of highest importance and some people sometimes put more emphasis on other criteria such as the aesthetic aspect, the cost, etc. Based on the findings of ADA, we should focus on the extent where the usability can provide the core satisfaction and we should also summarize the guideline on how the artifact should be designed.

Situated Usability Testing for Security Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greitzer, Frank L.

2011-03-02

While usability testing is well established, assessing the usability of security software, tools, or methods deserves more careful consideration. It has been argued that dealing with security has become too difficult for individuals or organizations to manage effectively or to use conveniently. As difficult as it is for system administrators and developers to deal with, security is even more challenging for casual users. Indeed, it is much too easy for casual/home users to configure the security of their systems in non-optimal ways that leave their systems inadvertently insecure. This is exacerbated by the fact that casual users are focused onmore » matters other than security, and likely would prefer not even to think about security. This brief report argues that when security and/or privacy are part of the equation, traditional methods for usability testing should be re-considered. The purpose of this brief report is to argue for and outline a method associated with a new approach to usability testing for examining usable security issues.« less

Sociotechnical Human Factors Involved in Remote Online Usability Testing of Two eHealth Interventions.

PubMed

Wozney, Lori M; Baxter, Pamela; Fast, Hilary; Cleghorn, Laura; Hundert, Amos S; Newton, Amanda S

2016-02-03

Research in the fields of human performance technology and human computer interaction are challenging the traditional macro focus of usability testing arguing for methods that help test moderators assess "use in context" (ie, cognitive skills, usability understood over time) and in authentic "real world" settings. Human factors in these complex test scenarios may impact on the quality of usability results being derived yet there is a lack of research detailing moderator experiences in these test environments. Most comparative research has focused on the impact of the physical environment on results, and rarely on how the sociotechnical elements of the test environment affect moderator and test user performance. Improving our understanding of moderator roles and experiences with conducting "real world" usability testing can lead to improved techniques and strategies To understand moderator experiences of using Web-conferencing software to conduct remote usability testing of 2 eHealth interventions. An exploratory case study approach was used to study 4 moderators' experiences using Blackboard Collaborate for remote testing sessions of 2 different eHealth interventions. Data collection involved audio-recording iterative cycles of test sessions, collecting summary notes taken by moderators, and conducting 2 90-minute focus groups via teleconference. A direct content analysis with an inductive coding approach was used to explore personal accounts, assess the credibility of data interpretation, and generate consensus on the thematic structure of the results. Following the convergence of data from the various sources, 3 major themes were identified: (1) moderators experienced and adapted to unpredictable changes in cognitive load during testing; (2) moderators experienced challenges in creating and sustaining social presence and untangling dialogue; and (3) moderators experienced diverse technical demands, but were able to collaboratively troubleshoot with test users. Results highlight important human-computer interactions and human factor qualities that impact usability testing processes. Moderators need an advanced skill and knowledge set to address the social interaction aspects of Web-based usability testing and technical aspects of conferencing software during test sessions. Findings from moderator-focused studies can inform the design of remote testing platforms and real-time usability evaluation processes that place less cognitive burden on moderators and test users.

Integrating Low-Cost Rapid Usability Testing into Agile System Development of Healthcare IT: A Methodological Perspective.

PubMed

Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

The development of more usable and effective healthcare information systems has become a critical issue. In the software industry methodologies such as agile and iterative development processes have emerged to lead to more effective and usable systems. These approaches highlight focusing on user needs and promoting iterative and flexible development practices. Evaluation and testing of iterative agile development cycles is considered an important part of the agile methodology and iterative processes for system design and re-design. However, the issue of how to effectively integrate usability testing methods into rapid and flexible agile design cycles has remained to be fully explored. In this paper we describe our application of an approach known as low-cost rapid usability testing as it has been applied within agile system development in healthcare. The advantages of the integrative approach are described, along with current methodological considerations.

Developing Software to “Track and Catch” Missed Follow-up of Abnormal Test Results in a Complex Sociotechnical Environment

PubMed Central

Smith, M.; Murphy, D.; Laxmisan, A.; Sittig, D.; Reis, B.; Esquivel, A.; Singh, H.

2013-01-01

Summary Background Abnormal test results do not always receive timely follow-up, even when providers are notified through electronic health record (EHR)-based alerts. High workload, alert fatigue, and other demands on attention disrupt a provider’s prospective memory for tasks required to initiate follow-up. Thus, EHR-based tracking and reminding functionalities are needed to improve follow-up. Objectives The purpose of this study was to develop a decision-support software prototype enabling individual and system-wide tracking of abnormal test result alerts lacking follow-up, and to conduct formative evaluations, including usability testing. Methods We developed a working prototype software system, the Alert Watch And Response Engine (AWARE), to detect abnormal test result alerts lacking documented follow-up, and to present context-specific reminders to providers. Development and testing took place within the VA’s EHR and focused on four cancer-related abnormal test results. Design concepts emphasized mitigating the effects of high workload and alert fatigue while being minimally intrusive. We conducted a multifaceted formative evaluation of the software, addressing fit within the larger socio-technical system. Evaluations included usability testing with the prototype and interview questions about organizational and workflow factors. Participants included 23 physicians, 9 clinical information technology specialists, and 8 quality/safety managers. Results Evaluation results indicated that our software prototype fit within the technical environment and clinical workflow, and physicians were able to use it successfully. Quality/safety managers reported that the tool would be useful in future quality assurance activities to detect patients who lack documented follow-up. Additionally, we successfully installed the software on the local facility’s “test” EHR system, thus demonstrating technical compatibility. Conclusion To address the factors involved in missed test results, we developed a software prototype to account for technical, usability, organizational, and workflow needs. Our evaluation has shown the feasibility of the prototype as a means of facilitating better follow-up for cancer-related abnormal test results. PMID:24155789

Developing software to "track and catch" missed follow-up of abnormal test results in a complex sociotechnical environment.

PubMed

Smith, M; Murphy, D; Laxmisan, A; Sittig, D; Reis, B; Esquivel, A; Singh, H

2013-01-01

Abnormal test results do not always receive timely follow-up, even when providers are notified through electronic health record (EHR)-based alerts. High workload, alert fatigue, and other demands on attention disrupt a provider's prospective memory for tasks required to initiate follow-up. Thus, EHR-based tracking and reminding functionalities are needed to improve follow-up. The purpose of this study was to develop a decision-support software prototype enabling individual and system-wide tracking of abnormal test result alerts lacking follow-up, and to conduct formative evaluations, including usability testing. We developed a working prototype software system, the Alert Watch And Response Engine (AWARE), to detect abnormal test result alerts lacking documented follow-up, and to present context-specific reminders to providers. Development and testing took place within the VA's EHR and focused on four cancer-related abnormal test results. Design concepts emphasized mitigating the effects of high workload and alert fatigue while being minimally intrusive. We conducted a multifaceted formative evaluation of the software, addressing fit within the larger socio-technical system. Evaluations included usability testing with the prototype and interview questions about organizational and workflow factors. Participants included 23 physicians, 9 clinical information technology specialists, and 8 quality/safety managers. Evaluation results indicated that our software prototype fit within the technical environment and clinical workflow, and physicians were able to use it successfully. Quality/safety managers reported that the tool would be useful in future quality assurance activities to detect patients who lack documented follow-up. Additionally, we successfully installed the software on the local facility's "test" EHR system, thus demonstrating technical compatibility. To address the factors involved in missed test results, we developed a software prototype to account for technical, usability, organizational, and workflow needs. Our evaluation has shown the feasibility of the prototype as a means of facilitating better follow-up for cancer-related abnormal test results.

Integration of MSFC Usability Lab with Usability Testing

NASA Technical Reports Server (NTRS)

Cheng, Yiwei; Richardson, Sally

2010-01-01

As part of the Stage Analysis Branch, human factors engineering plays an important role in relating humans to the systems of hardware and structure designs of the new launch vehicle. While many branches are involved in the technical aspects of creating a launch vehicle, human factors connects humans to the scientific systems with the goal of improving operational performance and safety while reducing operational error and damage to the hardware. Human factors engineers use physical and computerized models to visualize possible areas for improvements to ensure human accessibility to components requiring maintenance and that the necessary maintenance activities can be accomplished with minimal risks to human and hardware. Many methods of testing are used to fulfill this goal, such as physical mockups, computerized visualization, and usability testing. In this analysis, a usability test is conducted to test how usable a website is to users who are and are not familiar with it. The testing is performed using participants and Morae software to record and analyze the results. This analysis will be a preliminary test of the usability lab in preparation for use in new spacecraft programs, NASA Enterprise, or other NASA websites. The usability lab project is divided into two parts: integration of the usability lab and a preliminary test of the usability lab.

A usability evaluation of four commercial dental computer-based patient record systems

PubMed Central

Thyvalikakath, Thankam P.; Monaco, Valerie; Thambuganipalle, Hima Bindu; Schleyer, Titus

2008-01-01

Background The usability of dental computer-based patient record (CPR) systems has not been studied, despite early evidence that poor usability is a problem for dental CPR system users at multiple levels. Methods The authors conducted formal usability tests of four dental CPR systems by using a purposive sample of four groups of five novice users. The authors measured task outcomes (correctly completed, incorrectly completed and incomplete) in each CPR system while the participants performed nine clinical documentation tasks, as well as the number of usability problems identified in each CPR system and their potential relationship to task outcomes. The authors reviewed the software application design aspects responsible for these usability problems. Results The range for correctly completed tasks was 16 to 64 percent, for incorrectly completed tasks 18 to 38 percent and for incomplete tasks 9 to 47 percent. The authors identified 286 usability problems. The main types were three unsuccessful attempts, negative affect and task incorrectly completed. They also identified six problematic interface and interaction designs that led to usability problems. Conclusion The four dental CPR systems studied have significant usability problems for novice users, resulting in a steep learning curve and potentially reduced system adoption. Clinical Implications The significant number of data entry errors raises concerns about the quality of documentation in clinical practice. PMID:19047669

Software, Copyright, and Site-License Agreements: Publishers' Perspective of Library Practice.

ERIC Educational Resources Information Center

Happer, Stephanie K.

Thirty-one academic publishers of stand-alone software and book/disk packages were surveyed to determine whether publishers have addressed the copyright issues inherent in circulating these packages within the library environment. Twenty-two questionnaires were returned, providing a 71% return rate. There were 18 usable questionnaires. Publishers…

3D laser measurements of bare and shod feet during walking.

PubMed

Novak, Boštjan; Možina, Janez; Jezeršek, Matija

2014-01-01

This article presents a new system for 3D foot-shape measurements during walking. It is based on the laser-triangulation, multiple-line-illumination and color-modulation techniques. It consists of a walking stage and four measuring modules that simultaneously acquire the foot shape from the top, bottom and side views. The measuring speed is 30 fps. Custom-developed software makes it possible to analyze the foot's dimensions at an arbitrary cross-section by means of the width, height, girth and section orientation. Six subjects were measured during bare and shod walking, and the bare foot and the outside dimensions of the footwear during the entire stance phase are presented. The relative measurement repeatability of a single subject is 0.5% for bare foot and 1% for shod foot. This means that it is possible to study the differences between various influences on the foot-shape dynamics, such as a bare/shod foot, different loading conditions and the shoe's stiffness condition. Copyright © 2014 Elsevier B.V. All rights reserved.

Preliminary design of the HARMONI science software

NASA Astrophysics Data System (ADS)

Piqueras, Laure; Jarno, Aurelien; Pécontal-Rousset, Arlette; Loupias, Magali; Richard, Johan; Schwartz, Noah; Fusco, Thierry; Sauvage, Jean-François; Neichel, Benoît; Correia, Carlos M.

2016-08-01

This paper introduces the science software of HARMONI. The Instrument Numerical Model simulates the instrument from the optical point of view and provides synthetic exposures simulating detector readouts from data-cubes containing astrophysical scenes. The Data Reduction Software converts raw-data frames into a fully calibrated, scientifically usable data cube. We present the functionalities and the preliminary design of this software, describe some of the methods and algorithms used and highlight the challenges that we will have to face.

Reliability, Validity, and Usability of Data Extraction Programs for Single-Case Research Designs.

PubMed

Moeyaert, Mariola; Maggin, Daniel; Verkuilen, Jay

2016-11-01

Single-case experimental designs (SCEDs) have been increasingly used in recent years to inform the development and validation of effective interventions in the behavioral sciences. An important aspect of this work has been the extension of meta-analytic and other statistical innovations to SCED data. Standard practice within SCED methods is to display data graphically, which requires subsequent users to extract the data, either manually or using data extraction programs. Previous research has examined issues of reliability and validity of data extraction programs in the past, but typically at an aggregate level. Little is known, however, about the coding of individual data points. We focused on four different software programs that can be used for this purpose (i.e., Ungraph, DataThief, WebPlotDigitizer, and XYit), and examined the reliability of numeric coding, the validity compared with real data, and overall program usability. This study indicates that the reliability and validity of the retrieved data are independent of the specific software program, but are dependent on the individual single-case study graphs. Differences were found in program usability in terms of user friendliness, data retrieval time, and license costs. Ungraph and WebPlotDigitizer received the highest usability scores. DataThief was perceived as unacceptable and the time needed to retrieve the data was double that of the other three programs. WebPlotDigitizer was the only program free to use. As a consequence, WebPlotDigitizer turned out to be the best option in terms of usability, time to retrieve the data, and costs, although the usability scores of Ungraph were also strong. © The Author(s) 2016.

MySchoolDayOnline: Applying Universal Design Principles to the Development of a Fully Accessible Online Scheduling Tool for Students with Visual Impairments

ERIC Educational Resources Information Center

Sapp, Wendy

2007-01-01

This article presents the universal design features that were identified during the alpha development of a scheduler software program, known as MySchoolDayOnline, for use in schools, and provides preliminary research on the usability of these features. The study presented here investigated the accessibility and usability of MySchoolDayOnline for…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Svetlana Shasharina

The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

Usability evaluation of the digital anger thermometer app.

PubMed

Mattson, Donald C

2017-09-01

The digital anger thermometer is a prototype for a mobile application (app) for use with adults in anger management treatment. The digital anger thermometer incorporates standards of software development in addition to anger management resources from the Substance Abuse and Mental Health Services Administration. The digital anger thermometer underwent a usability study conducted by five expert reviewers. The results indicate that it is easy to learn, efficient, and ergonomically sound. However, it does not offer support features or user-error tolerance. The digital anger thermometer prototype requires additional usability studies and comparative research in order for it to become an actual mental health app.

A software quality model and metrics for risk assessment

NASA Technical Reports Server (NTRS)

Hyatt, L.; Rosenberg, L.

1996-01-01

A software quality model and its associated attributes are defined and used as the model for the basis for a discussion on risk. Specific quality goals and attributes are selected based on their importance to a software development project and their ability to be quantified. Risks that can be determined by the model's metrics are identified. A core set of metrics relating to the software development process and its products is defined. Measurements for each metric and their usability and applicability are discussed.

Using Web Metric Software to Drive: Mobile Website Development

ERIC Educational Resources Information Center

Tidal, Junior

2011-01-01

Many libraries have developed mobile versions of their websites. In order to understand their users, web developers have conducted both usability tests and focus groups, yet analytical software and web server logs can also be used to better understand users. Using data collected from these tools, the Ursula C. Schwerin Library has made informed…

Development and Use of a Computer Software for Learning by Observation and Appreciation: A New Way of Planetary Science Education

NASA Technical Reports Server (NTRS)

Mikouchi, A. K.; Mikouchi, T.

2000-01-01

We developed a computer software to make users learn about the Moon through their observation and appreciation. We performed a usability test at school, and knew that 7th grade students enjoyed it, making them more interested in the Moon than before.

Utility and Usability as Factors Influencing Teacher Decisions about Software Integration

ERIC Educational Resources Information Center

Okumus, Samet; Lewis, Lindsey; Wiebe, Eric; Hollebrands, Karen

2016-01-01

Given the importance of teacher in the implementation of computer technology in classrooms, the technology acceptance model and TPACK model were used to better understand the decision-making process teachers use in determining how, when, and where computer software is used in mathematics classrooms. Thirty-four (34) teachers implementing…

Continuation of research into software for space operations support, volume 1

NASA Technical Reports Server (NTRS)

Collier, Mark D.; Killough, Ronnie; Martin, Nancy L.

1990-01-01

A prototype workstation executive called the Hardware Independent Software Development Environment (HISDE) was developed. Software technologies relevant to workstation executives were researched and evaluated and HISDE was used as a test bed for prototyping efforts. New X Windows software concepts and technology were introduced into workstation executives and related applications. The four research efforts performed included: (1) Research into the usability and efficiency of Motif (an X Windows based graphic user interface) which consisted of converting the existing Athena widget based HISDE user interface to Motif demonstrating the usability of Motif and providing insight into the level of effort required to translate an application from widget to another; (2) Prototype a real time data display widget which consisted of research methods for and prototyping the selected method of displaying textual values in an efficient manner; (3) X Windows performance evaluation which consisted of a series of performance measurements which demonstrated the ability of low level X Windows to display textural information; (4) Convert the Display Manager to X Window/Motif which is the application used by NASA for data display during operational mode.

Web usability testing with a Hispanic medically underserved population.

PubMed

Moore, Mary; Bias, Randolph G; Prentice, Katherine; Fletcher, Robin; Vaughn, Terry

2009-04-01

Skilled website developers value usability testing to assure user needs are met. When the target audience differs substantially from the developers, it becomes essential to tailor both design and evaluation methods. In this study, researchers carried out a multifaceted usability evaluation of a website (Healthy Texas) designed for Hispanic audiences with lower computer literacy and lower health literacy. METHODS INCLUDED: (1) heuristic evaluation by a usability engineer, (2) remote end-user testing using WebEx software; and (3) face-to-face testing in a community center where use of the website was likely. Researchers found standard usability testing methods needed to be modified to provide interpreters, increased flexibility for time on task, presence of a trusted intermediary such as a librarian, and accommodation for family members who accompanied participants. Participants offered recommendations for website redesign, including simplified language, engaging and relevant graphics, culturally relevant examples, and clear navigation. User-centered design is especially important when website developers are not representative of the target audience. Failure to conduct appropriate usability testing with a representative audience can substantially reduce use and value of the website. This thorough course of usability testing identified improvements that benefit all users but become crucial when trying to reach an underserved audience.

From expert-derived user needs to user-perceived ease of use and usefulness: a two-phase mixed-methods evaluation framework.

PubMed

Boland, Mary Regina; Rusanov, Alexander; So, Yat; Lopez-Jimenez, Carlos; Busacca, Linda; Steinman, Richard C; Bakken, Suzanne; Bigger, J Thomas; Weng, Chunhua

2014-12-01

Underspecified user needs and frequent lack of a gold standard reference are typical barriers to technology evaluation. To address this problem, this paper presents a two-phase evaluation framework involving usability experts (phase 1) and end-users (phase 2). In phase 1, a cross-system functionality alignment between expert-derived user needs and system functions was performed to inform the choice of "the best available" comparison system to enable a cognitive walkthrough in phase 1 and a comparative effectiveness evaluation in phase 2. During phase 2, five quantitative and qualitative evaluation methods are mixed to assess usability: time-motion analysis, software log, questionnaires - System Usability Scale and the Unified Theory of Acceptance of Use of Technology, think-aloud protocols, and unstructured interviews. Each method contributes data for a unique measure (e.g., time motion analysis contributes task-completion-time; software log contributes action transition frequency). The measures are triangulated to yield complementary insights regarding user-perceived ease-of-use, functionality integration, anxiety during use, and workflow impact. To illustrate its use, we applied this framework in a formative evaluation of a software called Integrated Model for Patient Care and Clinical Trials (IMPACT). We conclude that this mixed-methods evaluation framework enables an integrated assessment of user needs satisfaction and user-perceived usefulness and usability of a novel design. This evaluation framework effectively bridges the gap between co-evolving user needs and technology designs during iterative prototyping and is particularly useful when it is difficult for users to articulate their needs for technology support due to the lack of a baseline. Copyright © 2013 Elsevier Inc. All rights reserved.

Sociotechnical Human Factors Involved in Remote Online Usability Testing of Two eHealth Interventions

PubMed Central

2016-01-01

Background Research in the fields of human performance technology and human computer interaction are challenging the traditional macro focus of usability testing arguing for methods that help test moderators assess “use in context” (ie, cognitive skills, usability understood over time) and in authentic “real world” settings. Human factors in these complex test scenarios may impact on the quality of usability results being derived yet there is a lack of research detailing moderator experiences in these test environments. Most comparative research has focused on the impact of the physical environment on results, and rarely on how the sociotechnical elements of the test environment affect moderator and test user performance. Improving our understanding of moderator roles and experiences with conducting “real world” usability testing can lead to improved techniques and strategies Objective To understand moderator experiences of using Web-conferencing software to conduct remote usability testing of 2 eHealth interventions. Methods An exploratory case study approach was used to study 4 moderators’ experiences using Blackboard Collaborate for remote testing sessions of 2 different eHealth interventions. Data collection involved audio-recording iterative cycles of test sessions, collecting summary notes taken by moderators, and conducting 2 90-minute focus groups via teleconference. A direct content analysis with an inductive coding approach was used to explore personal accounts, assess the credibility of data interpretation, and generate consensus on the thematic structure of the results. Results Following the convergence of data from the various sources, 3 major themes were identified: (1) moderators experienced and adapted to unpredictable changes in cognitive load during testing; (2) moderators experienced challenges in creating and sustaining social presence and untangling dialogue; and (3) moderators experienced diverse technical demands, but were able to collaboratively troubleshoot with test users. Conclusions Results highlight important human-computer interactions and human factor qualities that impact usability testing processes. Moderators need an advanced skill and knowledge set to address the social interaction aspects of Web-based usability testing and technical aspects of conferencing software during test sessions. Findings from moderator-focused studies can inform the design of remote testing platforms and real-time usability evaluation processes that place less cognitive burden on moderators and test users. PMID:27026291

Usability: a critical success factor for managing change in the clinical info-structure.

PubMed

Kay, S

2005-06-01

There can be no doubt that the clinical info-structure is being significantly enriched with the deployment of new systems throughout the health sector. From a technological perspective, the initial emphasis has been mainly on functionality and only latterly on the usability of these clinical information systems. However, the large scale and rapid pace of the changes being wrought in the health sector will have a major impact on clinicians and patients, not least in how they interact with the technology. Therefore, it is not only hardware and software but people-ware, too, that needs to be actively managed; not simply a one-off functional specification but an ongoing, complex relationship. Usability is the human factor that encompasses the ethical, educational, and evaluative aspects of design. There is also a strong case for regarding usability of clinical information systems as a key critical success factor for the management of change within the health-care domain. In particular, the relationship between usability, and education and training is examined.

Usability evaluation of user interface of thesis title review system

NASA Astrophysics Data System (ADS)

Tri, Y.; Erna, A.; Gellysa, U.

2018-03-01

Presentation of programs with user interface that can be accessed online through the website of course greatly provide user benefits. User can easily access the program they need. There are usability values that serve as a benchmark for the success of a user accessible program, ie efficiency, effectiveness, and convenience. These usability values also determine the development of the program for the better use. Therefore, on the review title thesis program that will be implemented in STT Dumai was measured usability evaluation. It aims to see which sides are not yet perfect and need to be improved to improve the performance and utilization of the program. Usability evaluation was measured by using smartPLS software. Database used was the result of respondent questionnaires that include questions about the experience when they used program. The result of a review of thesis title program implemented in STT Dumai has an efficiency value of 22.615, the effectiveness of 20.612, and satisfaction of 33.177.

Technology Transfer Challenges for High-Assurance Software Engineering Tools

NASA Technical Reports Server (NTRS)

Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.

2003-01-01

In this paper, we describe our experience with the challenges thar we are currently facing in our effort to develop advanced software verification and validation tools. We categorize these challenges into several areas: cost benefits modeling, tool usability, customer application domain, and organizational issues. We provide examples of challenges in each area and identrfj, open research issues in areas which limit our ability to transfer high-assurance software engineering tools into practice.

The need for separate operational and engineering user interfaces for command and control of airborne synthetic aperture radar systems

NASA Astrophysics Data System (ADS)

Klein, Laura M.; McNamara, Laura A.

2017-05-01

In this paper, we address the needed components to create usable engineering and operational user interfaces (UIs) for airborne Synthetic Aperture Radar (SAR) systems. As airborne SAR technology gains wider acceptance in the remote sensing and Intelligence, Surveillance, and Reconnaissance (ISR) communities, the need for effective and appropriate UIs to command and control these sensors has also increased. However, despite the growing demand for SAR in operational environments, the technology still faces an adoption roadblock, in large part due to the lack of effective UIs. It is common to find operational interfaces that have barely grown beyond the disparate tools engineers and technologists developed to demonstrate an initial concept or system. While sensor usability and utility are common requirements to engineers and operators, their objectives for interacting with the sensor are different. As such, the amount and type of information presented ought to be tailored to the specific application.

How Usability Testing Resulted in Improvements to Ground Collision Software for General Aviation: Improved Ground Collision Avoidance System (IGCAS)

NASA Technical Reports Server (NTRS)

Lamarr, Michael; Chinske, Chris; Williams, Ethan; Law, Cameron; Skoog, Mark; Sorokowski, Paul

2016-01-01

The NASA improved Ground Collision Avoidance System (iGCAS) team conducted an onsite usability study at Experimental Aircraft Association (EAA) Air Venture in Oshkosh, Wisconsin from July 19 through July 26, 2015. EAA Air Venture had approximately 550,000 attendees from which the sample pool of pilots were selected. The objectives of this study were to assess the overall appropriateness and acceptability of iGCAS as a warning system for General Aviation aircraft, usability of the iGCAS displays and audio cues, test terrain avoidance characteristics, performance, functionality, pilot response time, and correlate terrain avoidance performance and pilot response time data.

Design Optimization Toolkit: Users' Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilo Valentin, Miguel Alejandro

The Design Optimization Toolkit (DOTk) is a stand-alone C++ software package intended to solve complex design optimization problems. DOTk software package provides a range of solution methods that are suited for gradient/nongradient-based optimization, large scale constrained optimization, and topology optimization. DOTk was design to have a flexible user interface to allow easy access to DOTk solution methods from external engineering software packages. This inherent flexibility makes DOTk barely intrusive to other engineering software packages. As part of this inherent flexibility, DOTk software package provides an easy-to-use MATLAB interface that enables users to call DOTk solution methods directly from the MATLABmore » command window.« less

Usability Evaluation of Air Warfare Assessment & Review Toolset in Exercise Black Skies 2012

DTIC Science & Technology

2013-12-01

is, it allows the user to do what they want to do with it ( Pressman , 2005). This concept is sometimes called fitness for purpose (Nielsen, 1993...Other characteristics of good software defined by Pressman (2005) are: reliability – the proportion of time the software is available for its intended...Diego, CA: Academic Press,. Pressman , R. S. (2005). Software Engineering: A Practitioner’s Approach. New York: McGraw- Hill. Symons, S., France, M

CASL Dakota Capabilities Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, Brian M.; Simmons, Chris; Williams, Brian J.

2017-10-10

The Dakota software project serves the mission of Sandia National Laboratories and supports a worldwide user community by delivering state-of-the-art research and robust, usable software for optimization and uncertainty quantification. These capabilities enable advanced exploration and riskinformed prediction with a wide range of computational science and engineering models. Dakota is the verification and validation (V&V) / uncertainty quantification (UQ) software delivery vehicle for CASL, allowing analysts across focus areas to apply these capabilities to myriad nuclear engineering analyses.

PROOF OF CONCEPT FOR A HUMAN RELIABILITY ANALYSIS METHOD FOR HEURISTIC USABILITY EVALUATION OF SOFTWARE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring; David I. Gertman; Jeffrey C. Joe

2005-09-01

An ongoing issue within human-computer interaction (HCI) is the need for simplified or “discount” methods. The current economic slowdown has necessitated innovative methods that are results driven and cost effective. The myriad methods of design and usability are currently being cost-justified, and new techniques are actively being explored that meet current budgets and needs. Recent efforts in human reliability analysis (HRA) are highlighted by the ten-year development of the Standardized Plant Analysis Risk HRA (SPAR-H) method. The SPAR-H method has been used primarily for determining humancentered risk at nuclear power plants. The SPAR-H method, however, shares task analysis underpinnings withmore » HCI. Despite this methodological overlap, there is currently no HRA approach deployed in heuristic usability evaluation. This paper presents an extension of the existing SPAR-H method to be used as part of heuristic usability evaluation in HCI.« less

The Software Therapist: Usability Problem Diagnosis Through Latent Semantic Analysis

DTIC Science & Technology

2006-06-14

at a given level is equivalent to removing attributes that don’t apply to a given usability situation, thereby filtering or pruning off irrelevant sub...Each answer prunes the number of stages remaining. Through a process of elimination, the Wizard helps evaluators home in on the correct stage...the diagnosis for one problem report, the user may want to take a break to get a cup of coffee or take a short walk, but when ready to continue with

Coordinating the Complexity of Tools, Tasks, and Users: On Theory-Based Approaches to Authoring Tool Usability

ERIC Educational Resources Information Center

Murray, Tom

2016-01-01

Intelligent Tutoring Systems authoring tools are highly complex educational software applications used to produce highly complex software applications (i.e. ITSs). How should our assumptions about the target users (authors) impact the design of authoring tools? In this article I first reflect on the factors leading to my original 1999 article on…

Dem Generation from Close-Range Photogrammetry Using Extended Python Photogrammetry Toolbox

NASA Astrophysics Data System (ADS)

Belmonte, A. A.; Biong, M. M. P.; Macatulad, E. G.

2017-10-01

Digital elevation models (DEMs) are widely used raster data for different applications concerning terrain, such as for flood modelling, viewshed analysis, mining, land development, engineering design projects, to name a few. DEMs can be obtained through various methods, including topographic survey, LiDAR or photogrammetry, and internet sources. Terrestrial close-range photogrammetry is one of the alternative methods to produce DEMs through the processing of images using photogrammetry software. There are already powerful photogrammetry software that are commercially-available and can produce high-accuracy DEMs. However, this entails corresponding cost. Although, some of these software have free or demo trials, these trials have limits in their usable features and usage time. One alternative is the use of free and open-source software (FOSS), such as the Python Photogrammetry Toolbox (PPT), which provides an interface for performing photogrammetric processes implemented through python script. For relatively small areas such as in mining or construction excavation, a relatively inexpensive, fast and accurate method would be advantageous. In this study, PPT was used to generate 3D point cloud data from images of an open pit excavation. The PPT was extended to add an algorithm converting the generated point cloud data into a usable DEM.

Apex Reference Manual 3.0 Beta

NASA Technical Reports Server (NTRS)

Freed, Michael A.

2005-01-01

Apex is a toolkit for constructing software that behaves intelligently and responsively in demanding task environments. Reflecting its origin at NASA where Apex continues to be developed, current applications include: a) Providing autonomous mission management and tactical control capabilities for unmanned aerial vehicles including an autonomous surveillance helicopter and a simulation prototype of an unmanned fixed-wing aircraft to be used for wildfire mapping; b) Simulating human air traffic controllers, pilots and astronauts to help predict how people might respond to changes in equipment or procedures; and c) Predicting the precise duration and sequence of routine human behaviors based on a human-computer interaction engineering technique called CPM-GOMS. Among Apex s components are a set of implemented reasoning services, such as those for reactive planning and temporal pattern recognition; a software architecture that embeds and integrates these services and allows additional reasoning elements to be added as extensions; a formal language for specifying agent knowledge; a simulation environment to facilitate prototyping and analysis; and Sherpa, a set of tools for visualizing autonomy logic and runtime behavior. In combination, these are meant to provide a flexible and usable framework for creating, testing, and deploying intelligent agent software. Overall, our goal in developing Apex is to lower economic barriers to developing intelligent software agents. New ideas about how to extend or modify the system are evaluated in terms of their impact in reducing the time, expertise, and inventiveness required to build and maintain applications. For example, potential enhancements to the AI reasoning capabilities in the system are reviewed not only for usefulness and distinctiveness, but also for their impact on the readability and general usability of Apex s behavior representation language (PDL) and on the transparency of resulting behavior. A second central part of our approach is to iteratively refine Apex based on lessons learned from as diverse a set of applications as possible. Many applications have been developed by users outside the core development team including engineers, researchers, and students. Usability is thus a central concern for every aspect of Apex visible to a user, including PDL, Sherpa, the Apex installation process, APIs, and user documentation. Apex users vary in their areas of expertise and in their familiarity with autonomy technology. Focusing on usability, a development philosophy summarized by the project motto "Usable Autonomy," has been important part of enabling diverse users to employ Apex successfully and to provide feedback needed to guide iterative, user-centered refinement.

VoIP for Telerehabilitation: A Pilot Usability Study for HIPAA Compliance

PubMed Central

Watzlaf, Valerie R.; Ondich, Briana

2012-01-01

Consumer-based, free Voice and video over the Internet Protocol (VoIP) software systems such as Skype and others are used by health care providers to deliver telerehabilitation and other health-related services to clients. Privacy and security applications as well as HIPAA compliance within these protocols have been questioned by practitioners, health information managers, and other healthcare entities. This pilot usability study examined whether four respondents who used the top three, free consumer-based, VoIP software systems perceived these VoIP technologies to be private, secure, and HIPAA compliant; most did not. While the pilot study limitations include the number of respondents and systems assessed, the protocol can be applied to future research and replicated for instructional purposes. Recommendations are provided for VoIP companies, providers, and clients/consumers. PMID:25945194

Black box integration of computer-aided diagnosis into PACS deserves a second chance: results of a usability study concerning bone age assessment.

PubMed

Geldermann, Ina; Grouls, Christoph; Kuhl, Christiane; Deserno, Thomas M; Spreckelsen, Cord

2013-08-01

Usability aspects of different integration concepts for picture archiving and communication systems (PACS) and computer-aided diagnosis (CAD) were inquired on the example of BoneXpert, a program determining the skeletal age from a left hand's radiograph. CAD-PACS integration was assessed according to its levels: data, function, presentation, and context integration focusing on usability aspects. A user-based study design was selected. Statements of seven experienced radiologists using two alternative types of integration provided by BoneXpert were acquired and analyzed using a mixed-methods approach based on think-aloud records and a questionnaire. In both variants, the CAD module (BoneXpert) was easily integrated in the workflow, found comprehensible and fitting in the conceptual framework of the radiologists. Weak points of the software integration referred to data and context integration. Surprisingly, visualization of intermediate image processing states (presentation integration) was found less important as compared to efficient handling and fast computation. Seamlessly integrating CAD into the PACS without additional work steps or unnecessary interrupts and without visualizing intermediate images may considerably improve software performance and user acceptance with efforts in time.

Harnessing Scientific Literature Reports for Pharmacovigilance

PubMed Central

Ripple, Anna; Tonning, Joseph; Munoz, Monica; Hasan, Rashedul; Ly, Thomas; Francis, Henry; Bodenreider, Olivier

2017-01-01

Summary Objectives We seek to develop a prototype software analytical tool to augment FDA regulatory reviewers’ capacity to harness scientific literature reports in PubMed/MEDLINE for pharmacovigilance and adverse drug event (ADE) safety signal detection. We also aim to gather feedback through usability testing to assess design, performance, and user satisfaction with the tool. Methods A prototype, open source, web-based, software analytical tool generated statistical disproportionality data mining signal scores and dynamic visual analytics for ADE safety signal detection and management. We leveraged Medical Subject Heading (MeSH) indexing terms assigned to published citations in PubMed/MEDLINE to generate candidate drug-adverse event pairs for quantitative data mining. Six FDA regulatory reviewers participated in usability testing by employing the tool as part of their ongoing real-life pharmacovigilance activities to provide subjective feedback on its practical impact, added value, and fitness for use. Results All usability test participants cited the tool’s ease of learning, ease of use, and generation of quantitative ADE safety signals, some of which corresponded to known established adverse drug reactions. Potential concerns included the comparability of the tool’s automated literature search relative to a manual ‘all fields’ PubMed search, missing drugs and adverse event terms, interpretation of signal scores, and integration with existing computer-based analytical tools. Conclusions Usability testing demonstrated that this novel tool can automate the detection of ADE safety signals from published literature reports. Various mitigation strategies are described to foster improvements in design, productivity, and end user satisfaction. PMID:28326432

Usability of Computerized Lung Auscultation-Sound Software (CLASS) for learning pulmonary auscultation.

PubMed

Machado, Ana; Oliveira, Ana; Jácome, Cristina; Pereira, Marco; Moreira, José; Rodrigues, João; Aparício, José; Jesus, Luis M T; Marques, Alda

2018-04-01

The mastering of pulmonary auscultation requires complex acoustic skills. Computer-assisted learning tools (CALTs) have potential to enhance the learning of these skills; however, few have been developed for this purpose and do not integrate all the required features. Thus, this study aimed to assess the usability of a new CALT for learning pulmonary auscultation. Computerized Lung Auscultation-Sound Software (CLASS) usability was assessed by eight physiotherapy students using computer screen recordings, think-aloud reports, and facial expressions. Time spent in each task, frequency of messages and facial expressions, number of clicks and problems reported were counted. The timelines of the three methods used were matched/synchronized and analyzed. The tasks exercises and annotation of respiratory sounds were the ones requiring more clicks (median 132, interquartile range [23-157]; 93 [53-155]; 91 [65-104], respectively) and where most errors (19; 37; 15%, respectively) and problems (n = 7; 6; 3, respectively) were reported. Each participant reported a median of 6 problems, with a total of 14 different problems found, mainly related with CLASS functionalities (50%). Smile was the only facial expression presented in all tasks (n = 54). CLASS is the only CALT available that meets all the required features for learning pulmonary auscultation. The combination of the three usability methods identified advantages/disadvantages of CLASS and offered guidance for future developments, namely in annotations and exercises. This will allow the improvement of CLASS and enhance students' activities for learning pulmonary auscultation skills.

Development of a Unix/VME data acquisition system

NASA Astrophysics Data System (ADS)

Miller, M. C.; Ahern, S.; Clark, S. M.

1992-01-01

The current status of a Unix-based VME data acquisition development project is described. It is planned to use existing Fortran data collection software to drive the existing CAMAC electronics via a VME CAMAC branch driver card and associated Daresbury Unix driving software. The first usable Unix driver has been written and produces single-action CAMAC cycles from test software. The data acquisition code has been implemented in test mode under Unix with few problems and effort is now being directed toward finalizing calls to the CAMAC-driving software and ultimate evaluation of the complete system.

Qualitative Analysis for Maintenance Process Assessment

NASA Technical Reports Server (NTRS)

Brand, Lionel; Kim, Yong-Mi; Melo, Walcelio; Seaman, Carolyn; Basili, Victor

1996-01-01

In order to improve software maintenance processes, we first need to be able to characterize and assess them. These tasks must be performed in depth and with objectivity since the problems are complex. One approach is to set up a measurement-based software process improvement program specifically aimed at maintenance. However, establishing a measurement program requires that one understands the problems to be addressed by the measurement program and is able to characterize the maintenance environment and processes in order to collect suitable and cost-effective data. Also, enacting such a program and getting usable data sets takes time. A short term substitute is therefore needed. We propose in this paper a characterization process aimed specifically at maintenance and based on a general qualitative analysis methodology. This process is rigorously defined in order to be repeatable and usable by people who are not acquainted with such analysis procedures. A basic feature of our approach is that actual implemented software changes are analyzed in order to understand the flaws in the maintenance process. Guidelines are provided and a case study is shown that demonstrates the usefulness of the approach.

High End Computing Technologies for Earth Science Applications: Trends, Challenges, and Innovations

NASA Technical Reports Server (NTRS)

Parks, John (Technical Monitor); Biswas, Rupak; Yan, Jerry C.; Brooks, Walter F.; Sterling, Thomas L.

2003-01-01

Earth science applications of the future will stress the capabilities of even the highest performance supercomputers in the areas of raw compute power, mass storage management, and software environments. These NASA mission critical problems demand usable multi-petaflops and exabyte-scale systems to fully realize their science goals. With an exciting vision of the technologies needed, NASA has established a comprehensive program of advanced research in computer architecture, software tools, and device technology to ensure that, in partnership with US industry, it can meet these demanding requirements with reliable, cost effective, and usable ultra-scale systems. NASA will exploit, explore, and influence emerging high end computing architectures and technologies to accelerate the next generation of engineering, operations, and discovery processes for NASA Enterprises. This article captures this vision and describes the concepts, accomplishments, and the potential payoff of the key thrusts that will help meet the computational challenges in Earth science applications.

A personal health information toolkit for health intervention research.

PubMed

Kizakevich, Paul N; Eckhoff, Randall; Weger, Stacey; Weeks, Adam; Brown, Janice; Bryant, Stephanie; Bakalov, Vesselina; Zhang, Yuying; Lyden, Jennifer; Spira, James

2014-01-01

With the emergence of mobile health (mHealth) apps, there is a growing demand for better tools for developing and evaluating mobile health interventions. Recently we developed the Personal Health Intervention Toolkit (PHIT), a software framework which eases app implementation and facilitates scientific evaluation. PHIT integrates self-report and physiological sensor instruments, evidence-based advisor logic, and self-help interventions such as meditation, health education, and cognitive behavior change. PHIT can be used to facilitate research, interventions for chronic diseases, risky behaviors, sleep, medication adherence, environmental monitoring, momentary data collection health screening, and clinical decision support. In a series of usability evaluations, participants reported an overall usability score of 4.5 on a 1-5 Likert scale and an 85 score on the System Usability Scale, indicating a high percentile rank of 95%.

Psychological Usability of Layered Application Software Platforms

NASA Technical Reports Server (NTRS)

Uhiarik, John

1999-01-01

This grant provided Graduate Research Fellowship Program support to James Michael Herold to obtain a graduate degree from the Department of Psychology at Kansas State University and conduct usability testing of graphical user interfaces the Kennedy Space Center. The student independently took an additional internship at Boll Laboratories without informing his graduate advisor or the Department of Psychology. Because he was NOT making progress toward his degree, he elected not to pursue his graduate studies at Kansas State University and self-terminated from the program (spin without informing his advisor or the Department of Psychology]. What he accomplished for NASA in terms of usability testing at the Kennedy Space Center is unclear. NASA terminated support for the project: 07/30/99, including a $4,000 commitment to provide infrastructure support to the Department of Psychology.

Enhancing patient safety and quality of care by improving the usability of electronic health record systems: recommendations from AMIA.

PubMed

Middleton, Blackford; Bloomrosen, Meryl; Dente, Mark A; Hashmat, Bill; Koppel, Ross; Overhage, J Marc; Payne, Thomas H; Rosenbloom, S Trent; Weaver, Charlotte; Zhang, Jiajie

2013-06-01

In response to mounting evidence that use of electronic medical record systems may cause unintended consequences, and even patient harm, the AMIA Board of Directors convened a Task Force on Usability to examine evidence from the literature and make recommendations. This task force was composed of representatives from both academic settings and vendors of electronic health record (EHR) systems. After a careful review of the literature and of vendor experiences with EHR design and implementation, the task force developed 10 recommendations in four areas: (1) human factors health information technology (IT) research, (2) health IT policy, (3) industry recommendations, and (4) recommendations for the clinician end-user of EHR software. These AMIA recommendations are intended to stimulate informed debate, provide a plan to increase understanding of the impact of usability on the effective use of health IT, and lead to safer and higher quality care with the adoption of useful and usable EHR systems.

Enhancing patient safety and quality of care by improving the usability of electronic health record systems: recommendations from AMIA

PubMed Central

Middleton, Blackford; Bloomrosen, Meryl; Dente, Mark A; Hashmat, Bill; Koppel, Ross; Overhage, J Marc; Payne, Thomas H; Rosenbloom, S Trent; Weaver, Charlotte; Zhang, Jiajie

2013-01-01

In response to mounting evidence that use of electronic medical record systems may cause unintended consequences, and even patient harm, the AMIA Board of Directors convened a Task Force on Usability to examine evidence from the literature and make recommendations. This task force was composed of representatives from both academic settings and vendors of electronic health record (EHR) systems. After a careful review of the literature and of vendor experiences with EHR design and implementation, the task force developed 10 recommendations in four areas: (1) human factors health information technology (IT) research, (2) health IT policy, (3) industry recommendations, and (4) recommendations for the clinician end-user of EHR software. These AMIA recommendations are intended to stimulate informed debate, provide a plan to increase understanding of the impact of usability on the effective use of health IT, and lead to safer and higher quality care with the adoption of useful and usable EHR systems. PMID:23355463

Object-oriented design of medical imaging software.

PubMed

Ligier, Y; Ratib, O; Logean, M; Girard, C; Perrier, R; Scherrer, J R

1994-01-01

A special software package for interactive display and manipulation of medical images was developed at the University Hospital of Geneva, as part of a hospital wide Picture Archiving and Communication System (PACS). This software package, called Osiris, was especially designed to be easily usable and adaptable to the needs of noncomputer-oriented physicians. The Osiris software has been developed to allow the visualization of medical images obtained from any imaging modality. It provides generic manipulation tools, processing tools, and analysis tools more specific to clinical applications. This software, based on an object-oriented paradigm, is portable and extensible. Osiris is available on two different operating systems: the Unix X-11/OSF-Motif based workstations, and the Macintosh family.

A practical overview and comparison of certain commercial forensic software tools for processing large-scale digital investigations

NASA Astrophysics Data System (ADS)

Kröger, Knut; Creutzburg, Reiner

2013-05-01

The aim of this paper is to show the usefulness of modern forensic software tools for processing large-scale digital investigations. In particular, we focus on the new version of Nuix 4.2 and compare it with AccessData FTK 4.2, X-Ways Forensics 16.9 and Guidance Encase Forensic 7 regarding its performance, functionality, usability and capability. We will show how these software tools work with large forensic images and how capable they are in examining complex and big data scenarios.

"Usability of data integration and visualization software for multidisciplinary pediatric intensive care: a human factors approach to assessing technology".

PubMed

Lin, Ying Ling; Guerguerian, Anne-Marie; Tomasi, Jessica; Laussen, Peter; Trbovich, Patricia

2017-08-14

Intensive care clinicians use several sources of data in order to inform decision-making. We set out to evaluate a new interactive data integration platform called T3™ made available for pediatric intensive care. Three primary functions are supported: tracking of physiologic signals, displaying trajectory, and triggering decisions, by highlighting data or estimating risk of patient instability. We designed a human factors study to identify interface usability issues, to measure ease of use, and to describe interface features that may enable or hinder clinical tasks. Twenty-two participants, consisting of bedside intensive care physicians, nurses, and respiratory therapists, tested the T3™ interface in a simulation laboratory setting. Twenty tasks were performed with a true-to-setting, fully functional, prototype, populated with physiological and therapeutic intervention patient data. Primary data visualization was time series and secondary visualizations were: 1) shading out-of-target values, 2) mini-trends with exaggerated maxima and minima (sparklines), and 3) bar graph of a 16-parameter indicator. Task completion was video recorded and assessed using a use error rating scale. Usability issues were classified in the context of task and type of clinician. A severity rating scale was used to rate potential clinical impact of usability issues. Time series supported tracking a single parameter but partially supported determining patient trajectory using multiple parameters. Visual pattern overload was observed with multiple parameter data streams. Automated data processing using shading and sparklines was often ignored but the 16-parameter data reduction algorithm, displayed as a persistent bar graph, was visually intuitive. However, by selecting or automatically processing data, triggering aids distorted the raw data that clinicians use regularly. Consequently, clinicians could not rely on new data representations because they did not know how they were established or derived. Usability issues, observed through contextual use, provided directions for tangible design improvements of data integration software that may lessen use errors and promote safe use. Data-driven decision making can benefit from iterative interface redesign involving clinician-users in simulated environments. This study is a first step in understanding how software can support clinicians' decision making with integrated continuous monitoring data. Importantly, testing of similar platforms by all the different disciplines who may become clinician users is a fundamental step necessary to understand the impact on clinical outcomes of decision aids.

Heuristics to Evaluate Interactive Systems for Children with Autism Spectrum Disorder (ASD).

PubMed

Khowaja, Kamran; Salim, Siti Salwah; Asemi, Adeleh

2015-01-01

In this paper, we adapted and expanded a set of guidelines, also known as heuristics, to evaluate the usability of software to now be appropriate for software aimed at children with autism spectrum disorder (ASD). We started from the heuristics developed by Nielsen in 1990 and developed a modified set of 15 heuristics. The first 5 heuristics of this set are the same as those of the original Nielsen set, the next 5 heuristics are improved versions of Nielsen's, whereas the last 5 heuristics are new. We present two evaluation studies of our new heuristics. In the first, two groups compared Nielsen's set with the modified set of heuristics, with each group evaluating two interactive systems. The Nielsen's heuristics were assigned to the control group while the experimental group was given the modified set of heuristics, and a statistical analysis was conducted to determine the effectiveness of the modified set, the contribution of 5 new heuristics and the impact of 5 improved heuristics. The results show that the modified set is significantly more effective than the original, and we found a significant difference between the five improved heuristics and their corresponding heuristics in the original set. The five new heuristics are effective in problem identification using the modified set. The second study was conducted using a system which was developed to ascertain if the modified set was effective at identifying usability problems that could be fixed before the release of software. The post-study analysis revealed that the majority of the usability problems identified by the experts were fixed in the updated version of the system.

Heuristic Evaluation on Mobile Interfaces: A New Checklist

PubMed Central

Yáñez Gómez, Rosa; Cascado Caballero, Daniel; Sevillano, José-Luis

2014-01-01

The rapid evolution and adoption of mobile devices raise new usability challenges, given their limitations (in screen size, battery life, etc.) as well as the specific requirements of this new interaction. Traditional evaluation techniques need to be adapted in order for these requirements to be met. Heuristic evaluation (HE), an Inspection Method based on evaluation conducted by experts over a real system or prototype, is based on checklists which are desktop-centred and do not adequately detect mobile-specific usability issues. In this paper, we propose a compilation of heuristic evaluation checklists taken from the existing bibliography but readapted to new mobile interfaces. Selecting and rearranging these heuristic guidelines offer a tool which works well not just for evaluation but also as a best-practices checklist. The result is a comprehensive checklist which is experimentally evaluated as a design tool. This experimental evaluation involved two software engineers without any specific knowledge about usability, a group of ten users who compared the usability of a first prototype designed without our heuristics, and a second one after applying the proposed checklist. The results of this experiment show the usefulness of the proposed checklist for avoiding usability gaps even with nontrained developers. PMID:25295300

Evaluation of Nursing Information Systems: Application of Usability Aspects in the Development of Systems.

PubMed

Moghaddasi, Hamid; Rabiei, Reza; Asadi, Farkhondeh; Ostvan, Negin

2017-04-01

As the largest group providing healthcare services, nurses require well-designed information systems in their practice. This study aims to evaluate the usability of nursing information systems (NIS). This cross-sectional survey was conducted in 2015. The settings of the study consisted of four hospitals affiliated with three medical universities in Tehran (Iran). The subjects of the study included nurses who had access to and used a NIS developed by four major software companies. The data were collected using a modified version of a usability questionnaire known as IsoMetrics, based on the International Standard ISO 9241, Part 11. The questionnaire is composed of 35 questions divided into seven general criteria. The validity of the questionnaire was determined by experts in the field, and the reliability was checked using Cronbach's alpha (α = 0.91). The questionnaire was then distributed to 184 nurses. The response rate was 64.6%. Among the seven ISO usability criteria, suitability for the task (3.10 ± 1.24) and suitability for learning (3.10 ± 1.27) had the highest mean value. The lowest mean value (2.37 ± 1.29) was related to the suitability for individualization. Addressing issues related to individualization and self-descriptiveness could improve the usability of nursing systems. Considering usability requirements in the design of a NIS will lead to the efficient and effective use of these systems.

Evaluating the Usability of a Professional Modeling Tool Repurposed for Middle School Learning

NASA Astrophysics Data System (ADS)

Peters, Vanessa L.; Songer, Nancy Butler

2013-10-01

This paper reports the results of a three-stage usability test of a modeling tool designed to support learners' deep understanding of the impacts of climate change on ecosystems. The design process involved repurposing an existing modeling technology used by professional scientists into a learning tool specifically designed for middle school students. To evaluate usability, we analyzed students' task performance and task completion time as they worked on an activity with the repurposed modeling technology. In stage 1, we conducted remote testing of an early modeling prototype with urban middle school students (n = 84). In stages 2 and 3, we used screencasting software to record students' mouse and keyboard movements during collaborative think-alouds (n = 22) and conducted a qualitative analysis of their peer discussions. Taken together, the study findings revealed two kinds of usability issues that interfered with students' productive use of the tool: issues related to the use of data and information, and issues related to the use of the modeling technology. The study findings resulted in design improvements that led to stronger usability outcomes and higher task performance among students. In this paper, we describe our methods for usability testing, our research findings, and our design solutions for supporting students' use of the modeling technology and use of data. The paper concludes with implications for the design and study of modeling technologies for science learning.

Quality in End User Documentation.

ERIC Educational Resources Information Center

Morrison, Ronald

1994-01-01

Discusses quality in end-user documentation for computer applications and explains four approaches to improving quality in end-user documents. Highlights include online help, usability testing, technical writing elements, statistical approaches, and concepts relating to software quality that are also applicable to user manuals. (LRW)

Real-Time Processing Library for Open-Source Hardware Biomedical Sensors

PubMed Central

Castro-García, Juan A.; Lebrato-Vázquez, Clara

2018-01-01

Applications involving data acquisition from sensors need samples at a preset frequency rate, the filtering out of noise and/or analysis of certain frequency components. We propose a novel software architecture based on open-software hardware platforms which allows programmers to create data streams from input channels and easily implement filters and frequency analysis objects. The performances of the different classes given in the size of memory allocated and execution time (number of clock cycles) were analyzed in the low-cost platform Arduino Genuino. In addition, 11 people took part in an experiment in which they had to implement several exercises and complete a usability test. Sampling rates under 250 Hz (typical for many biomedical applications) makes it feasible to implement filters, sliding windows and Fourier analysis, operating in real time. Participants rated software usability at 70.2 out of 100 and the ease of use when implementing several signal processing applications was rated at just over 4.4 out of 5. Participants showed their intention of using this software because it was percieved as useful and very easy to use. The performances of the library showed that it may be appropriate for implementing small biomedical real-time applications or for human movement monitoring, even in a simple open-source hardware device like Arduino Genuino. The general perception about this library is that it is easy to use and intuitive. PMID:29596394

Real-Time Processing Library for Open-Source Hardware Biomedical Sensors.

PubMed

Molina-Cantero, Alberto J; Castro-García, Juan A; Lebrato-Vázquez, Clara; Gómez-González, Isabel M; Merino-Monge, Manuel

2018-03-29

Applications involving data acquisition from sensors need samples at a preset frequency rate, the filtering out of noise and/or analysis of certain frequency components. We propose a novel software architecture based on open-software hardware platforms which allows programmers to create data streams from input channels and easily implement filters and frequency analysis objects. The performances of the different classes given in the size of memory allocated and execution time (number of clock cycles) were analyzed in the low-cost platform Arduino Genuino. In addition, 11 people took part in an experiment in which they had to implement several exercises and complete a usability test. Sampling rates under 250 Hz (typical for many biomedical applications) makes it feasible to implement filters, sliding windows and Fourier analysis, operating in real time. Participants rated software usability at 70.2 out of 100 and the ease of use when implementing several signal processing applications was rated at just over 4.4 out of 5. Participants showed their intention of using this software because it was percieved as useful and very easy to use. The performances of the library showed that it may be appropriate for implementing small biomedical real-time applications or for human movement monitoring, even in a simple open-source hardware device like Arduino Genuino. The general perception about this library is that it is easy to use and intuitive.

Heuristics to Evaluate Interactive Systems for Children with Autism Spectrum Disorder (ASD)

PubMed Central

Khowaja, Kamran; Salim, Siti Salwah

2015-01-01

In this paper, we adapted and expanded a set of guidelines, also known as heuristics, to evaluate the usability of software to now be appropriate for software aimed at children with autism spectrum disorder (ASD). We started from the heuristics developed by Nielsen in 1990 and developed a modified set of 15 heuristics. The first 5 heuristics of this set are the same as those of the original Nielsen set, the next 5 heuristics are improved versions of Nielsen's, whereas the last 5 heuristics are new. We present two evaluation studies of our new heuristics. In the first, two groups compared Nielsen’s set with the modified set of heuristics, with each group evaluating two interactive systems. The Nielsen’s heuristics were assigned to the control group while the experimental group was given the modified set of heuristics, and a statistical analysis was conducted to determine the effectiveness of the modified set, the contribution of 5 new heuristics and the impact of 5 improved heuristics. The results show that the modified set is significantly more effective than the original, and we found a significant difference between the five improved heuristics and their corresponding heuristics in the original set. The five new heuristics are effective in problem identification using the modified set. The second study was conducted using a system which was developed to ascertain if the modified set was effective at identifying usability problems that could be fixed before the release of software. The post-study analysis revealed that the majority of the usability problems identified by the experts were fixed in the updated version of the system. PMID:26196385

Next Gen One Portal Usability Evaluation

NASA Technical Reports Server (NTRS)

Cross, E. V., III; Perera, J. S.; Hanson, A. M.; English, K.; Vu, L.; Amonette, W.

2018-01-01

Each exercise device on the International Space Station (ISS) has a unique, customized software system interface with unique layouts / hierarchy, and operational principles that require significant crew training. Furthermore, the software programs are not adaptable and provide no real-time feedback or motivation to enhance the exercise experience and/or prevent injuries. Additionally, the graphical user interfaces (GUI) of these systems present information through multiple layers resulting in difficulty navigating to the desired screens and functions. These limitations of current exercise device GUI's lead to increased crew time spent on initiating, loading, performing exercises, logging data and exiting the system. To address these limitations a Next Generation One Portal (NextGen One Portal) Crew Countermeasure System (CMS) was developed, which utilizes the latest industry guidelines in GUI designs to provide an intuitive ease of use approach (i.e., 80% of the functionality gained within 5-10 minutes of initial use without/limited formal training required). This is accomplished by providing a consistent interface using common software to reduce crew training, increase efficiency & user satisfaction while also reducing development & maintenance costs. Results from the usability evaluations showed the NextGen One Portal UI having greater efficiency, learnability, memorability, usability and overall user experience than the current Advanced Resistive Exercise Device (ARED) UI used by astronauts on ISS. Specifically, the design of the One-Portal UI as an app interface similar to those found on the Apple and Google's App Store, assisted many of the participants in grasping the concepts of the interface with minimum training. Although the NextGen One-Portal UI was shown to be an overall better interface, observations by the test facilitators noted specific exercise tasks appeared to have a significant impact on the NextGen One-Portal UI efficiency. Future updates to the NextGen One Portal UI will address these inefficiencies.

Assessment of the usability and impact of the Idaho Health Data Exchange (IHDE).

PubMed

Reis, Janet; MacKenzie, Lisa; Soelberg, Terri; Smith, Jennifer

2016-04-01

Eighty four health care professionals participated in an online survey assessing the usability, and clinical and administrative impact of the Idaho Health Data Exchange's (IHDE) Virtual Health Record (VHR). The IHDE VHR allows authorized users to use a secure web interface to view lab, radiology and transcribed reports from multiple facilities and view medical histories on patients in the data exchange. Results indicate the usability of the IHDE VHR was almost universally positively rated with the Software Usability Measurement Inventory (SUMI) utilized as the assessment method. Medical providers however had the lowest rating of the exchange, raising concerns about the need for additional training and support. The addition of other Idaho health care organizations to the health data exchange was most widely desired, with the most frequently cited benefit being more comprehensive access to patients' records. In contrast to other published evaluations of health data exchanges in the U.S., few of the concerns emerged about cost of implementation of the data exchange or trust in the quality of information contained therein.

APRN Usability Testing of a Tailored Computer-Mediated Health Communication Program

PubMed Central

Lin, Carolyn A.; Neafsey, Patricia J.; Anderson, Elizabeth

2010-01-01

This study tested the usability of a touch-screen enabled “Personal Education Program” (PEP) with Advanced Practice Registered Nurses (APRN). The PEP is designed to enhance medication adherence and reduce adverse self-medication behaviors in older adults with hypertension. An iterative research process was employed, which involved the use of: (1) pre-trial focus groups to guide the design of system information architecture, (2) two different cycles of think-aloud trials to test the software interface, and (3) post-trial focus groups to gather feedback on the think-aloud studies. Results from this iterative usability testing process were utilized to systematically modify and improve the three PEP prototype versions—the pilot, Prototype-1 and Prototype-2. Findings contrasting the two separate think-aloud trials showed that APRN users rated the PEP system usability, system information and system-use satisfaction at a moderately high level between trials. In addition, errors using the interface were reduced by 76 percent and the interface time was reduced by 18.5 percent between the two trials. The usability testing processes employed in this study ensured an interface design adapted to APRNs' needs and preferences to allow them to effectively utilize the computer-mediated health-communication technology in a clinical setting. PMID:19940619

Naive (commonsense) geography and geobrowser usability after ten years of Google Earth

NASA Astrophysics Data System (ADS)

Hamerlinck, J. D.

2016-04-01

In 1995, the concept of ‘naive geography’ was formally introduced as an area of cognitive geographic information science representing ‘the body of knowledge that people have about the surrounding geographic world’ and reflecting ‘the way people think and reason about geographic space and time, both consciously and subconsciously’. The need to incorporate such commonsense knowledge and reasoning into design of geospatial technologies was identified but faced challenges in formalizing these relationships and processes in software implementation. Ten years later, the Google Earth geobrowser was released, marking the beginning of a new era of open access to, and application of, geographic data and information in society. Fast-forward to today, and the opportunity presents itself to take stock of twenty years of naive geography and a decade of the ubiquitous virtual globe. This paper introduces an ongoing research effort to explore the integration of naive (or commonsense) geography concepts in the Google Earth geobrowser virtual globe and their possible impact on Google Earth's usability, utility, and usefulness. A multi-phase methodology is described, combining usability reviews and usability testing with use-case scenarios involving the U.S.-Canadian Yellowstone to Yukon Initiative. Initial progress on a usability review combining cognitive walkthroughs and heuristics evaluation is presented.

Proposing Electronic Health Record Usability Requirements Based on Enriched ISO 9241 Metric Usability Model

PubMed Central

Farzandipour, Mehrdad; Riazi, Hossein; Jabali, Monireh Sadeqi

2018-01-01

Introduction: System usability assessment is among the important aspects in assessing the quality of clinical information technology, especially when the end users of the system are concerned. This study aims at providing a comprehensive list of system usability. Methods: This research is a descriptive cross-sectional one conducted using Delphi technique in three phases in 2013. After experts’ ideas were concluded, the final version of the questionnaire including 163 items in three phases was presented to 40 users of information systems in hospitals. The grading ranged from 0-4. Data analysis was conducted using SPSS software. Those requirements with a mean point of three or higher were finally confirmed. Results: The list of system usability requirements for electronic health record was designed and confirmed in nine areas including suitability for the task (24 items), self-descriptiveness (22 items), controllability (19 questions), conformity with user expectations (25 items), error tolerance (21 items), suitability for individualization (7 items), suitability for learning (19 items), visual clarity (18 items) and auditory presentation (8 items). Conclusion: A relatively comprehensive model including useful requirements for using EHR was presented which can increase functionality, effectiveness and users’ satisfaction. Thus, it is suggested that the present model be adopted by system designers and healthcare system institutions to assess those systems. PMID:29719310

Usability study of youtube websites for Malaysian teenagers

NASA Astrophysics Data System (ADS)

Razak, Mohd Nur Faiz Abd; Hussain, Azham; Hamdi, Mohd Maizan Fishol

2017-10-01

Nowadays, YouTube is the 3rd most visited website in the world. It was created for users to search, watch and share video. Statistics show that YouTube run in more than 88 countries and support 76 different languages which covered almost 95% of Internet population globally. Therefore, a usability study is for specific type of users such as based on gender, range of age and country is considered a must for this kind of top website. In this study, we focus on YouTube website usability for Malaysian teenagers that are currently schooling in boarding school with limited access of Internet. It was done in a controlled lab environment with proper devices and software as MacBook, LCD Monitor, and WhatPulse heat map tracker. The evaluation was made based on usability metrics: ease of use, usefulness and satisfaction of users with combination of recording videos, mouse and keyboard heat map and questionnaires. Findings show that most of the respondents just use YouTube for video watching only while ignoring other features in the same time. There are difficulties in using it at the first moment but could catch up in short time. It shows how usable YouTube website especially in the learnability and memorability aspects.

"The Great Solar System Rescue": A Highly Usable Videodisc Program.

ERIC Educational Resources Information Center

Haas, Mary E.

1993-01-01

Describes an interactive problem-solving videodisc program designed for the middle schools. Explains the interdisciplinary nature of the program that includes information from astronomy, geology, history, and meteorology. Contends that the product is an excellent example of well-designed educational software. (CFR)

Towards usable and interdisciplinary e-infrastructure (Invited)

NASA Astrophysics Data System (ADS)

de Roure, D.

2010-12-01

e-Science and cyberinfrastucture at their outset tended to focus on ‘big science’ and cross-organisational infrastructures, demonstrating complex engineering with the promise of high returns. It soon became evident that the key to researchers harnessing new technology for everyday use is a user-centric approach which empowers the user - both from a developer and an end user viewpoint. For example, this philosophy is demonstrated in workflow systems for systematic data processing and in the Web 2.0 approach as exemplified by the myExperiment social web site for sharing workflows, methods and ‘research objects’. Hence the most disruptive aspect of Cloud and virtualisation is perhaps that they make new computational resources and applications usable, creating a flourishing ecosystem for routine processing and innovation alike - and in this we must consider software sustainability. This talk will discuss the changing nature of e-Science digital ecosystem, focus on the e-infrastructure for cross-disciplinary work, and highlight issues in sustainable software development in this context.

ZOOM Lite: next-generation sequencing data mapping and visualization software

PubMed Central

Zhang, Zefeng; Lin, Hao; Ma, Bin

2010-01-01

High-throughput next-generation sequencing technologies pose increasing demands on the efficiency, accuracy and usability of data analysis software. In this article, we present ZOOM Lite, a software for efficient reads mapping and result visualization. With a kernel capable of mapping tens of millions of Illumina or AB SOLiD sequencing reads efficiently and accurately, and an intuitive graphical user interface, ZOOM Lite integrates reads mapping and result visualization into a easy to use pipeline on desktop PC. The software handles both single-end and paired-end reads, and can output both the unique mapping result or the top N mapping results for each read. Additionally, the software takes a variety of input file formats and outputs to several commonly used result formats. The software is freely available at http://bioinfor.com/zoom/lite/. PMID:20530531

[The development and evaluation of software to verify diagnostic accuracy].

PubMed

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

Solving the Software Legacy Problem with RISA

NASA Astrophysics Data System (ADS)

Ibarra, A.; Gabriel, C.

2012-09-01

Nowadays hardware and system infrastructure evolve on time scales much shorter than the typical duration of space astronomy missions. Data processing software capabilities have to evolve to preserve the scientific return during the entire experiment life time. Software preservation is a key issue that has to be tackled before the end of the project to keep the data usable over many years. We present RISA (Remote Interface to Science Analysis) as a solution to decouple data processing software and infrastructure life-cycles, using JAVA applications and web-services wrappers to existing software. This architecture employs embedded SAS in virtual machines assuring a homogeneous job execution environment. We will also present the first studies to reactivate the data processing software of the EXOSAT mission, the first ESA X-ray astronomy mission launched in 1983, using the generic RISA approach.

Software architecture and engineering for patient records: current and future.

PubMed

Weng, Chunhua; Levine, Betty A; Mun, Seong K

2009-05-01

During the "The National Forum on the Future of the Defense Health Information System," a track focusing on "Systems Architecture and Software Engineering" included eight presenters. These presenters identified three key areas of interest in this field, which include the need for open enterprise architecture and a federated database design, net centrality based on service-oriented architecture, and the need for focus on software usability and reusability. The eight panelists provided recommendations related to the suitability of service-oriented architecture and the enabling technologies of grid computing and Web 2.0 for building health services research centers and federated data warehouses to facilitate large-scale collaborative health care and research. Finally, they discussed the need to leverage industry best practices for software engineering to facilitate rapid software development, testing, and deployment.

Development of an Ada package library

NASA Technical Reports Server (NTRS)

Burton, Bruce; Broido, Michael

1986-01-01

A usable prototype Ada package library was developed and is currently being evaluated for use in large software development efforts. The library system is comprised of an Ada-oriented design language used to facilitate the collection of reuse information, a relational data base to store reuse information, a set of reusable Ada components and tools, and a set of guidelines governing the system's use. The prototyping exercise is discussed and the lessons learned from it have led to the definition of a comprehensive tool set to facilitate software reuse.

Challenges in Managing Trustworthy Large-scale Digital Science

NASA Astrophysics Data System (ADS)

Evans, B. J. K.

2017-12-01

The increased use of large-scale international digital science has opened a number of challenges for managing, handling, using and preserving scientific information. The large volumes of information are driven by three main categories - model outputs including coupled models and ensembles, data products that have been processing to a level of usability, and increasingly heuristically driven data analysis. These data products are increasingly the ones that are usable by the broad communities, and far in excess of the raw instruments data outputs. The data, software and workflows are then shared and replicated to allow broad use at an international scale, which places further demands of infrastructure to support how the information is managed reliably across distributed resources. Users necessarily rely on these underlying "black boxes" so that they are productive to produce new scientific outcomes. The software for these systems depend on computational infrastructure, software interconnected systems, and information capture systems. This ranges from the fundamentals of the reliability of the compute hardware, system software stacks and libraries, and the model software. Due to these complexities and capacity of the infrastructure, there is an increased emphasis of transparency of the approach and robustness of the methods over the full reproducibility. Furthermore, with large volume data management, it is increasingly difficult to store the historical versions of all model and derived data. Instead, the emphasis is on the ability to access the updated products and the reliability by which both previous outcomes are still relevant and can be updated for the new information. We will discuss these challenges and some of the approaches underway that are being used to address these issues.

Crocodile Mathematics 1.1. [CD-ROM].

ERIC Educational Resources Information Center

2002

This CD-ROM consists of software that allows both teachers and students to create and experiment with mathematical models by linking shapes, graphs, numbers, and equations. It is usable for demonstrations, home learning, reinforcing concepts, illustrating concepts that are difficult to visualize, further pupil investigations, and project work.…

Student-Generated Multimedia Projects in the Classroom.

ERIC Educational Resources Information Center

Green, Tim; Brown, Abbie H.

2002-01-01

Explains how student-generated, computer-based multimedia projects can be meaningful learning activities to integrate into the K-12 curriculum. Describes three phases: design, including goals and objectives of the project and use of the finished product; production, including choosing multimedia software, prototyping, and usability testing; and…

Agile Learning: Sprinting through the Semester

ERIC Educational Resources Information Center

Lang, Guido

2017-01-01

This paper introduces agile learning, a novel pedagogical approach that applies the processes and principles of agile software development to the context of learning. Agile learning is characterized by short project cycles, called sprints, in which a usable deliverable is fully planned, designed, built, tested, reviewed, and launched. An…

Detecting barely visible impact damages of honeycomb and laminate CFRP using digital shearography

NASA Astrophysics Data System (ADS)

Burkov, Mikhail; Lyubutin, Pavel; Byakov, Anton; Panin, Sergey

2017-12-01

The paper deals with testing of the developed shearographic device and signal processing software applied for nondestructive testing/evaluation (NDT/E) of carbon fiber reinforced polymers (CFRP). There were 4 types of test specimens: laminate CFRP, honeycomb CFRP, laminate CFRP with the channel stiffener, and laminate CFRP bolted with the aluminum plate. All the specimens were subjected to impact loading using the drop weight technique according to the ASTM D7136 standard in order to produce barely visible impact damages (BVID). The obtained shearograms easily reveal BVIDs as nonuniformities in strain fields. The results are analyzed and discussed in view of the sensitivity of shearography to delamination and debonding.

Web-Based Mapping Puts the World at Your Fingertips

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's award-winning Earth Resources Laboratory Applications Software (ELAS) package was developed at Stennis Space Center. Since 1978, ELAS has been used worldwide for processing satellite and airborne sensor imagery data of the Earth's surface into readable and usable information. DATASTAR Inc., of Picayune, Mississippi, has used ELAS software in the DATASTAR Image Processing Exploitation (DIPEx) desktop and Internet image processing, analysis, and manipulation software. The new DIPEx Version III includes significant upgrades and improvements compared to its esteemed predecessor. A true World Wide Web application, this product evolved with worldwide geospatial dimensionality and numerous other improvements that seamlessly support the World Wide Web version.

Mission Management Computer Software for RLV-TD

NASA Astrophysics Data System (ADS)

Manju, C. R.; Joy, Josna Susan; Vidya, L.; Sheenarani, I.; Sruthy, C. N.; Viswanathan, P. C.; Dinesh, Sudin; Jayalekshmy, L.; Karuturi, Kesavabrahmaji; Sheema, E.; Syamala, S.; Unnikrishnan, S. Manju; Ali, S. Akbar; Paramasivam, R.; Sheela, D. S.; Shukkoor, A. Abdul; Lalithambika, V. R.; Mookiah, T.

2017-12-01

The Mission Management Computer (MMC) software is responsible for the autonomous navigation, sequencing, guidance and control of the Re-usable Launch Vehicle (RLV), through lift-off, ascent, coasting, re-entry, controlled descent and splashdown. A hard real-time system has been designed for handling the mission requirements in an integrated manner and for meeting the stringent timing constraints. Redundancy management and fault-tolerance techniques are also built into the system, in order to achieve a successful mission even in presence of component failures. This paper describes the functions and features of the components of the MMC software which has accomplished the successful RLV-Technology Demonstrator mission.

Requirements model for an e-Health awareness portal

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Nawi, Mohd Nasrun M.

2016-08-01

Requirements engineering is at the heart and foundation of software engineering process. Poor quality requirements inevitably lead to poor quality software solutions. Also, poor requirement modeling is tantamount to designing a poor quality product. So, quality assured requirements development collaborates fine with usable products in giving the software product the needed quality it demands. In the light of the foregoing, the requirements for an e-Ebola Awareness Portal were modeled with a good attention given to these software engineering concerns. The requirements for the e-Health Awareness Portal are modeled as a contribution to the fight against Ebola and helps in the fulfillment of the United Nation's Millennium Development Goal No. 6. In this study requirements were modeled using UML 2.0 modeling technique.

LiveDescribe: Can Amateur Describers Create High-Quality Audio Description?

ERIC Educational Resources Information Center

Branje, Carmen J.; Fels, Deborah I.

2012-01-01

Introduction: The study presented here evaluated the usability of the audio description software LiveDescribe and explored the acceptance rates of audio description created by amateur describers who used LiveDescribe to facilitate the creation of their descriptions. Methods: Twelve amateur describers with little or no previous experience with…

75 FR 14575 - Voting Equipment Evaluations Phase III

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-26

..., Human Performance-Based Standards and Usability Testing. NIST Phase III research is designed to: (1... vendor equipment will not be released. Comparative information may be released in a blind manner... electronic poll book systems as well as software used for ballot design and creation. Dated: March 23, 2010...

Simulating Data for Clinical Research: A Tutorial

ERIC Educational Resources Information Center

Beaujean, A. Alexander

2018-01-01

Simulation studies use computer-generated data to examine questions of interest that have traditionally been used to study properties of statistics and estimating algorithms. With the recent advent of powerful processing capabilities in affordable computers along with readily usable software, it is now feasible to use a simulation study to aid in…

A Template-Based Short Course Concept on Android Application Development

ERIC Educational Resources Information Center

Akopian, David; Melkonyan, Arsen; Golgani, Santosh C.; Yuen, Timothy T.; Saygin, Can

2013-01-01

Smartphones are a common accessory to provide rich user experience due to superior memory, advanced software-hardware support, fast processing, and multimedia capabilities. Responding to this trend, advanced engineering systems tend to integrate mobile devices with their solutions to facilitate usability. With many young students showing interest…

CONTENTdm Digital Collection Management Software and End-User Efficacy

ERIC Educational Resources Information Center

Dickson, Maggie

2008-01-01

Digital libraries and collections are a growing facet of today's traditional library. Digital library technologies have become increasingly more sophisticated in the effort to provide more and better access to the collections they contain. The evaluation of the usability of these technologies has not kept pace with technological developments,…

Micro sensor node for air pollutant monitoring: hardware and software issues.

PubMed

Choi, Sukwon; Kim, Nakyoung; Cha, Hojung; Ha, Rhan

2009-01-01

Wireless sensor networks equipped with various gas sensors have been actively used for air quality monitoring. Previous studies have typically explored system issues that include middleware or networking performance, but most research has barely considered the details of the hardware and software of the sensor node itself. In this paper, we focus on the design and implementation of a sensor board for air pollutant monitoring applications. Several hardware and software issues are discussed to explore the possibilities of a practical WSN-based air pollution monitoring system. Through extensive experiments and evaluation, we have determined the various characteristics of the gas sensors and their practical implications for air pollutant monitoring systems.

Software Process Assurance for Complex Electronics

NASA Technical Reports Server (NTRS)

Plastow, Richard A.

2007-01-01

Complex Electronics (CE) now perform tasks that were previously handled in software, such as communication protocols. Many methods used to develop software bare a close resemblance to CE development. Field Programmable Gate Arrays (FPGAs) can have over a million logic gates while system-on-chip (SOC) devices can combine a microprocessor, input and output channels, and sometimes an FPGA for programmability. With this increased intricacy, the possibility of software-like bugs such as incorrect design, logic, and unexpected interactions within the logic is great. With CE devices obscuring the hardware/software boundary, we propose that mature software methodologies may be utilized with slight modifications in the development of these devices. Software Process Assurance for Complex Electronics (SPACE) is a research project that used standardized S/W Assurance/Engineering practices to provide an assurance framework for development activities. Tools such as checklists, best practices and techniques were used to detect missing requirements and bugs earlier in the development cycle creating a development process for CE that was more easily maintained, consistent and configurable based on the device used.

Quantitative evaluation of software packages for single-molecule localization microscopy.

PubMed

Sage, Daniel; Kirshner, Hagai; Pengo, Thomas; Stuurman, Nico; Min, Junhong; Manley, Suliana; Unser, Michael

2015-08-01

The quality of super-resolution images obtained by single-molecule localization microscopy (SMLM) depends largely on the software used to detect and accurately localize point sources. In this work, we focus on the computational aspects of super-resolution microscopy and present a comprehensive evaluation of localization software packages. Our philosophy is to evaluate each package as a whole, thus maintaining the integrity of the software. We prepared synthetic data that represent three-dimensional structures modeled after biological components, taking excitation parameters, noise sources, point-spread functions and pixelation into account. We then asked developers to run their software on our data; most responded favorably, allowing us to present a broad picture of the methods available. We evaluated their results using quantitative and user-interpretable criteria: detection rate, accuracy, quality of image reconstruction, resolution, software usability and computational resources. These metrics reflect the various tradeoffs of SMLM software packages and help users to choose the software that fits their needs.

Usability evaluation of cloud-based mapping tools for the display of very large datasets

NASA Astrophysics Data System (ADS)

Stotz, Nicole Marie

The elasticity and on-demand nature of cloud services have made it easier to create web maps. Users only need access to a web browser and the Internet to utilize cloud based web maps, eliminating the need for specialized software. To encourage a wide variety of users, a map must be well designed; usability is a very important concept in designing a web map. Fusion Tables, a new product from Google, is one example of newer cloud-based distributed GIS services. It allows for easy spatial data manipulation and visualization, within the Google Maps framework. ESRI has also introduced a cloud based version of their software, called ArcGIS Online, built on Amazon's EC2 cloud. Utilizing a user-centered design framework, two prototype maps were created with data from the San Diego East County Economic Development Council. One map was built on Fusion Tables, and another on ESRI's ArcGIS Online. A usability analysis was conducted and used to compare both map prototypes in term so of design and functionality. Load tests were also ran, and performance metrics gathered on both map prototypes. The usability analysis was taken by 25 geography students, and consisted of time based tasks and questions on map design and functionality. Survey participants completed the time based tasks for the Fusion Tables map prototype quicker than those of the ArcGIS Online map prototype. While response was generally positive towards the design and functionality of both prototypes, overall the Fusion Tables map prototype was preferred. For the load tests, the data set was broken into 22 groups for a total of 44 tests. While the Fusion Tables map prototype performed more efficiently than the ArcGIS Online prototype, differences are almost unnoticeable. A SWOT analysis was conducted for each prototype. The results from this research point to the Fusion Tables map prototype. A redesign of this prototype would incorporate design suggestions from the usability survey, while some functionality would need to be dropped. This is a free product and would therefore be the best option if cost is an issue, but this map may not be supported in the future.

Development of the UTAUT2 model to measure the acceptance of medical laboratory portals by patients in Shiraz.

PubMed

Ravangard, Ramin; Kazemi, Zhila; Abbasali, Somaye Zaker; Sharifian, Roxana; Monem, Hossein

2017-02-01

One of the main stages for achieving the success is acceptance of technology by its users. Hence, identifying the effective factors in successful acceptance of information technology is necessary and vital. One such factor is usability. This study aimed to investigate the software usability in the "Unified Theory of Acceptance and Use of Technology 2 (UTAUT2)" model in patients' use of medical diagnosis laboratories' electronic portals in 2015. This cross-sectional study was carried out on 170 patients in 2015. A 27-item questionnaire adopted from previous research and the Usability Evaluation questionnaire were used for data collection. Data were analyzed using Structural Equation Modeling (SEM), with Partial Least Squares approach by SPSS 20.0 and Smart-PLS V3.0. The results showed that the construct of intention to use had significant associations with price value (t-value=2.77), hedonic motivation (t-value=4.46), habit (t-value=1.99) and usability (t-value=5.2), as well as the construct of usage behavior with usability (t-value=3.45) and intention to use (t-value=2.03). Considering the results of this study, the following recommendations can be made in order for the higher use of portals by the patients: informing patients about the advantages of using these portals, designing portals in a simple and understandable form, increasing the portals' attractiveness, etc.

Assurance of Complex Electronics. What Path Do We Take?

NASA Technical Reports Server (NTRS)

Plastow, Richard A.

2007-01-01

Many of the methods used to develop software bare a close resemblance to Complex Electronics (CE) development. CE are now programmed to perform tasks that were previously handled in software, such as communication protocols. For instance, Field Programmable Gate Arrays (FPGAs) can have over a million logic gates while system-on-chip (SOC) devices can combine a microprocessor, input and output channels, and sometimes an FPGA for programmability. With this increased intricacy, the possibility of "software-like" bugs such as incorrect design, logic, and unexpected interactions within the logic is great. Since CE devices are obscuring the hardware/software boundary, we propose that mature software methodologies may be utilized with slight modifications to develop these devices. By using standardized S/W Engineering methods such as checklists, missing requirements and "bugs" can be detected earlier in the development cycle, thus creating a development process for CE that will be easily maintained and configurable based on the device used.

Evaluation of Bare Ground on Rangelands using Unmanned Aerial Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert P. Breckenridge; Maxine Dakins

2011-01-01

Attention is currently being given to methods that assess the ecological condition of rangelands throughout the United States. There are a number of different indicators that assess ecological condition of rangelands. Bare Ground is being considered by a number of agencies and resource specialists as a lead indicator that can be evaluated over a broad area. Traditional methods of measuring bare ground rely on field technicians collecting data along a line transect or from a plot. Unmanned aerial vehicles (UAVs) provide an alternative to collecting field data, can monitor a large area in a relative short period of time, andmore » in many cases can enhance safety and time required to collect data. In this study, both fixed wing and helicopter UAVs were used to measure bare ground in a sagebrush steppe ecosystem. The data were collected with digital imagery and read using the image analysis software SamplePoint. The approach was tested over seven different plots and compared against traditional field methods to evaluate accuracy for assessing bare ground. The field plots were located on the Idaho National Laboratory (INL) site west of Idaho Falls, Idaho in locations where there is very little disturbance by humans and the area is grazed only by wildlife. The comparison of fixed-wing and helicopter UAV technology against field estimates shows good agreement for the measurement of bare ground. This study shows that if a high degree of detail and data accuracy is desired, then a helicopter UAV may be a good platform. If the data collection objective is to assess broad-scale landscape level changes, then the collection of imagery with a fixed-wing system is probably more appropriate.« less

Feasibility study of a clinical decision support system for the management of multimorbid seniors in primary care: study protocol.

PubMed

Weltermann, Birgitta; Kersting, Christine

2016-01-01

Care for seniors is complex because patients often have more than one disease, one medication, and one physician. It is a key challenge for primary care physicians to structure the various aspects of each patient's care, to integrate each patient's preferences, and to maintain a long-term overview. This article describes the design for the development and feasibility testing of the clinical decision support system (CDSS) eCare*Seniors© which is electronic health record (EHR)-based allowing for a long-term, comprehensive, evidence-based, and patient preference-oriented management of multimorbid seniors. This mixed-methods study is designed in three steps. First, focus groups and practice observations will be conducted to develop criteria for software design from a physicians' and practice assistants' perspective. Second, based on these criteria, a CDSS prototype will be developed. Third, the prototype's feasibility will be tested by five primary care practices in the care of 30 multimorbid seniors. Primary outcome is the usability of the software measured by the validated system usability scale (SUS) after 3 months. Secondary outcomes are the (a) willingness to routinely use the CDSS, (b) degree of utilization of the CDSS, (c) acceptance of the CDSS, (d) willingness of the physicians to purchase the CDSS, and (e) willingness of the practice assistants to use the CDSS in the long term. These outcomes will be measured using semi-structured interviews and software usage data. If the SUS score reaches ≥70 %, feasibility testing will be judged successful. Otherwise, the CDSS prototype will be refined according to the users' needs and retested by the physicians and practice assistants until it is fully adapted to their requirements and reaches a usability score ≥70 %. The study will support the development of a CDSS which is primary care-defined, user-friendly, easy-to-comprehend, workflow-oriented, and comprehensive. The software will assist physicians and practices in their long-term, individualized care for multimorbid seniors. German Clinical Trials Register, DRKS00008777.

Evaluation of the usability of a serious game aiming to teach facial expressions to schizophrenic patients.

PubMed

Isleyen, Filiz; Gulkesen, K Hakan; Cinemre, Buket; Samur, M Kemal; Zayim, Nese; Sen Kaya, Semiha

2014-01-01

In some psychological disorders such as autism and schizophrenia, loss of facial expression recognition skill may complicate patient's daily life. Information technology may help to develop facial expression recognition skill by educational software and games. We designed and developed an interactive web-based educational program with which we performed a usability study before investigating its effectiveness on the schizophrenia patients' ability of emotion perception. The purpose of this study is to describe the usability evaluation for a web-based game set that has been designed to teach facial expressions to schizophrenic patients. The usability study was done at two steps; first, we applied heuristic evaluation and the violations were rated in a scale from most to least severe and the major problems were solved. In the second step, think-aloud method was used and the web site was assessed by five schizophrenic patients. Eight experts participated in the heuristic evaluation, in which a total of 60 violations were identified with a mean severity of 2.77 (range: 0-4). All of the major problems (severity over 2.5) were listed and the usability problems were solved by the development team. After solving the problems, five users with a diagnosis of schizophrenia used the web site with the same scenario. They reported to have experienced minor, but different problems. In conclusion, we suggest that a combination of heuristic evaluation and think-aloud method may be an effective and efficient way for usability evaluations for the serious games that have been designed for special patient groups.

Automated Software Development Workstation (ASDW)

NASA Technical Reports Server (NTRS)

Fridge, Ernie

1990-01-01

Software development is a serious bottleneck in the construction of complex automated systems. An increase of the reuse of software designs and components has been viewed as a way to relieve this bottleneck. One approach to achieving software reusability is through the development and use of software parts composition systems. A software parts composition system is a software development environment comprised of a parts description language for modeling parts and their interfaces, a catalog of existing parts, a composition editor that aids a user in the specification of a new application from existing parts, and a code generator that takes a specification and generates an implementation of a new application in a target language. The Automated Software Development Workstation (ASDW) is an expert system shell that provides the capabilities required to develop and manipulate these software parts composition systems. The ASDW is now in Beta testing at the Johnson Space Center. Future work centers on responding to user feedback for capability and usability enhancement, expanding the scope of the software lifecycle that is covered, and in providing solutions to handling very large libraries of reusable components.

NASA PC software evaluation project

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kuan, Julie C.

1986-01-01

The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

Methods and Tools for Ethical Usability

NASA Astrophysics Data System (ADS)

Kavathatzopoulos, Iordanis; Kostrzewa, Agata; Laaksoharju, Mikael

The objectives of the tutorial are to provide knowledge of basic ethical, psychological and organizational theories that are relevant to consider ethical aspects during design and use of IT systems; knowledge and skills about handling and solving ethical problems in connection with design and use of IT-systems; and skills in using questionnaires, surveys, interviews and the like in connection with software development and IT-use. It contains lectures, workshop and exercises; use of special tools to identify and consider IT ethical issues during planning, construction, installation and use of IT systems; and group exercises where the participants train their ethical skills on IT ethical conflicts and problems. Intended participants are system developers, purchasers, usability experts, academics, HCI teachers.

Ada Compiler Validation Summary Report: Certificate Number: 940325S1. 11352 DDC-I DACS Sun SPARC/Solaries to Pentium PM Bare Ada Cross Compiler System, Version 4.6.4 Sun SPARCclassic = Intel Pentium (Operated as Bare Machine) Based in Xpress Desktop (Intel Product Number: XBASE6E4F-B)

DTIC Science & Technology

1994-03-25

Technology Building 225, Room A266 Gait•--eburg, Maryland 20899 U.S.A. Ada Von Ogan~ztionAda Jointt Program Office De & Software David R . Basel...Standards and Technology Building 225, Room A266 Gaithersburg, Maryland 20899 U.S.A. azi Ada Joint Program office Directoz’,’Coputer & Softvare David R ...characters, a bar (" r ) is written in the 16th position and the rest of the characters ame not prined. "* The place of the definition, i.e.. a line

Software Architecture of the NASA Shuttle Ground Operations Simulator - SGOS

NASA Technical Reports Server (NTRS)

Cook, Robert P.; Lostroscio, Charles T.

2005-01-01

The SGOS executive and its subsystems have been an integral component of the Shuttle Launch Safety Program for almost thirty years. It is usable (via the LAN) by over 2000 NASA employees at the Kennedy Space Center and 11,000 contractors. SGOS supports over 800 models comprised of several hundred thousand lines of code and over 1,000 MCP procedures. Yet neither language has a for loop!! The simulation software described in this paper is used to train ground controllers and to certify launch countdown readiness.

Software Architecture of the NASA Shuttle Ground Operations Simulator--SGOS

NASA Technical Reports Server (NTRS)

Cook Robert P.; Lostroscio, Charles T.

2005-01-01

The SGOS executive and its subsystems have been an integral component of the Shuttle Launch Safety Program for almost thirty years. it is usable (via the LAN) by over 2000 NASA employees at the Kennedy Space Center and 11,000 contractors. SGOS supports over 800 models comprised of several hundred thousand lines of code and over 1,00 MCP procedures. Yet neither language has a for loop!! The simulation software described in this paper is used to train ground controllers and to certify launch countdown readiness.

JCell--a Java-based framework for inferring regulatory networks from time series data.

PubMed

Spieth, C; Supper, J; Streichert, F; Speer, N; Zell, A

2006-08-15

JCell is a Java-based application for reconstructing gene regulatory networks from experimental data. The framework provides several algorithms to identify genetic and metabolic dependencies based on experimental data conjoint with mathematical models to describe and simulate regulatory systems. Owing to the modular structure, researchers can easily implement new methods. JCell is a pure Java application with additional scripting capabilities and thus widely usable, e.g. on parallel or cluster computers. The software is freely available for download at http://www-ra.informatik.uni-tuebingen.de/software/JCell.

Antiterrorist Software

NASA Technical Reports Server (NTRS)

Clark, David A.

1998-01-01

In light of the escalation of terrorism, the Department of Defense spearheaded the development of new antiterrorist software for all Government agencies by issuing a Broad Agency Announcement to solicit proposals. This Government-wide competition resulted in a team that includes NASA Lewis Research Center's Computer Services Division, who will develop the graphical user interface (GUI) and test it in their usability lab. The team launched a program entitled Joint Sphere of Security (JSOS), crafted a design architecture (see the following figure), and is testing the interface. This software system has a state-ofthe- art, object-oriented architecture, with a main kernel composed of the Dynamic Information Architecture System (DIAS) developed by Argonne National Laboratory. DIAS will be used as the software "breadboard" for assembling the components of explosions, such as blast and collapse simulations.

Ruby on Rails Issue Tracker

NASA Technical Reports Server (NTRS)

Rodriguez, Juan Jared

2014-01-01

The purpose of this report is to detail the tasks accomplished as a NASA NIFS intern for the summer 2014 session. This internship opportunity is to develop an issue tracker Ruby on Rails web application to improve the communication of developmental anomalies between the Support Software Computer Software Configuration Item (CSCI) teams, System Build and Information Architecture. As many may know software development is an arduous, time consuming, collaborative effort. It involves nearly as much work designing, planning, collaborating, discussing, and resolving issues as effort expended in actual development. This internship opportunity was put in place to help alleviate the amount of time spent discussing issues such as bugs, missing tests, new requirements, and usability concerns that arise during development and throughout the life cycle of software applications once in production.

Effects of Medical Device Regulations on the Development of Stand-Alone Medical Software: A Pilot Study.

PubMed

Blagec, Kathrin; Jungwirth, David; Haluza, Daniela; Samwald, Matthias

2018-01-01

Medical device regulations which aim to ensure safety standards do not only apply to hardware devices but also to standalone medical software, e.g. mobile apps. To explore the effects of these regulations on the development and distribution of medical standalone software. We invited a convenience sample of 130 domain experts to participate in an online survey about the impact of current regulations on the development and distribution of medical standalone software. 21 respondents completed the questionnaire. Participants reported slight positive effects on usability, reliability, and data security of their products, whereas the ability to modify already deployed software and customization by end users were negatively impacted. The additional time and costs needed to go through the regulatory process were perceived as the greatest obstacles in developing and distributing medical software. Further research is needed to compare positive effects on software quality with negative impacts on market access and innovation. Strategies for avoiding over-regulation while still ensuring safety standards need to be devised.

The impact of software quality characteristics on healthcare outcome: a literature review.

PubMed

Aghazadeh, Sakineh; Pirnejad, Habibollah; Moradkhani, Alireza; Aliev, Alvosat

2014-01-01

The aim of this study was to discover the effect of software quality characteristics on healthcare quality and efficiency indicators. Through a systematic literature review, we selected and analyzed 37 original research papers to investigate the impact of the software indicators (coming from the standard ISO 9126 quality characteristics and sub-characteristics) on some of healthcare important outcome indicators and finally ranked these software indicators. The results showed that the software characteristics usability, reliability and efficiency were mostly favored in the studies, indicating their importance. On the other hand, user satisfaction, quality of patient care, clinical workflow efficiency, providers' communication and information exchange, patient satisfaction and care costs were among the healthcare outcome indicators frequently evaluated in relation to the mentioned software characteristics. Regression Logistic Method was the most common assessment methodology, and Confirmatory Factor Analysis and Structural Equation Modeling were performed to test the structural model's fit. The software characteristics were considered to impact the healthcare outcome indicators through other intermediate factors (variables).

A software framework for developing measurement applications under variable requirements.

PubMed

Arpaia, Pasquale; Buzio, Marco; Fiscarelli, Lucio; Inglese, Vitaliano

2012-11-01

A framework for easily developing software for measurement and test applications under highly and fast-varying requirements is proposed. The framework allows the software quality, in terms of flexibility, usability, and maintainability, to be maximized. Furthermore, the development effort is reduced and finalized, by relieving the test engineer of development details. The framework can be configured for satisfying a large set of measurement applications in a generic field for an industrial test division, a test laboratory, or a research center. As an experimental case study, the design, the implementation, and the assessment inside the application to a measurement scenario of magnet testing at the European Organization for Nuclear Research is reported.

NSF Policies on Software and Data Sharing and their Implementation

NASA Astrophysics Data System (ADS)

Katz, Daniel

2014-01-01

Since January 2011, the National Science Foundation has required a Data Management plan to be submitted with all proposals. This plan should include a description of how the proposers will share the products of the research (http://www.nsf.gov/bfa/dias/policy/dmp.jsp). What constitutes such data will be determined by the community of interest through the process of peer review and program management. This may include, but is not limited to: data, publications, samples, physical collections, software and models. In particular, “investigators and grantees are encouraged to share software and inventions created under an award or otherwise make them or their products widely available and usable.”

Assessing the Effectiveness of Multimedia in Language Learning Software.

ERIC Educational Resources Information Center

Chun, Dorothy M.; Plass, Jan L.

In this paper, the effectiveness of a "CyberBuch," a multimedia program for reading authentic German texts, is assessed in three areas. First, based on user evaluation of the visual interface design, the usability of the program is assessed with particular regard to user reaction to the multimedia components of the program. Second,…

Microcomputer Usage in Secondary Marketing Education. A National Study.

ERIC Educational Resources Information Center

Searle, A. Gary

A study was conducted to determine microcomputer hardware, software, and inservice components of secondary marketing education programs. A questionnaire was developed and sent to 420 teacher-coordinators in 42 states. A total of 225 (54 percent) usable returns were tabulated at the University of Wisconsin-Stout Computer Center. Results of the…

Apps. Accessibility and Usability by People with Visual Disabilities

ERIC Educational Resources Information Center

Olmedo-Moreno, Eva María; López-Delgado, Adrian

2015-01-01

The increasing use of ICT devices, such as smartphones and tablets, needs development of properly software or apps to facilitate socio-educative life of citizens in smart cities: Adaptive educational resources, leisure and entertainment facilities or mobile payment services, among others. Undoubtedly, all that is opening a new age with more…

Usability Testing and Workflow Analysis of the TRADOC Data Visualization Tool

DTIC Science & Technology

2012-09-01

software such as blink data, saccades, and cognitive load based on pupil contraction. Eye-tracking was only a component of the data evaluated and as...line charts were a pain to read) Yes Yes Projecting the charts directly onto the regions increased clutter on the screen and is a bad stylistic

A support architecture for reliable distributed computing systems

NASA Technical Reports Server (NTRS)

Dasgupta, Partha; Leblanc, Richard J., Jr.

1988-01-01

The Clouds project is well underway to its goal of building a unified distributed operating system supporting the object model. The operating system design uses the object concept of structuring software at all levels of the system. The basic operating system was developed and work is under progress to build a usable system.

Integration of Computer Related Instruction in Texas Vocational Agriculture Programs. Final Report.

ERIC Educational Resources Information Center

Cepica, M. J.; And Others

A study examined current usage of microcomputers, projected software needs, and teacher inservice training needs in Texas vocational agriculture programs. Questionnaires were mailed to each of the 922 vocational agriculture departments in Texas. Data from the 446 usable instruments returned were tabulated by geographical area and school size.…

Open source EMR software: profiling, insights and hands-on analysis.

PubMed

Kiah, M L M; Haiqi, Ahmed; Zaidan, B B; Zaidan, A A

2014-11-01

The use of open source software in health informatics is increasingly advocated by authors in the literature. Although there is no clear evidence of the superiority of the current open source applications in the healthcare field, the number of available open source applications online is growing and they are gaining greater prominence. This repertoire of open source options is of a great value for any future-planner interested in adopting an electronic medical/health record system, whether selecting an existent application or building a new one. The following questions arise. How do the available open source options compare to each other with respect to functionality, usability and security? Can an implementer of an open source application find sufficient support both as a user and as a developer, and to what extent? Does the available literature provide adequate answers to such questions? This review attempts to shed some light on these aspects. The objective of this study is to provide more comprehensive guidance from an implementer perspective toward the available alternatives of open source healthcare software, particularly in the field of electronic medical/health records. The design of this study is twofold. In the first part, we profile the published literature on a sample of existent and active open source software in the healthcare area. The purpose of this part is to provide a summary of the available guides and studies relative to the sampled systems, and to identify any gaps in the published literature with respect to our research questions. In the second part, we investigate those alternative systems relative to a set of metrics, by actually installing the software and reporting a hands-on experience of the installation process, usability, as well as other factors. The literature covers many aspects of open source software implementation and utilization in healthcare practice. Roughly, those aspects could be distilled into a basic taxonomy, making the literature landscape more perceivable. Nevertheless, the surveyed articles fall short of fulfilling the targeted objective of providing clear reference to potential implementers. The hands-on study contributed a more detailed comparative guide relative to our set of assessment measures. Overall, no system seems to satisfy an industry-standard measure, particularly in security and interoperability. The systems, as software applications, feel similar from a usability perspective and share a common set of functionality, though they vary considerably in community support and activity. More detailed analysis of popular open source software can benefit the potential implementers of electronic health/medical records systems. The number of examined systems and the measures by which to compare them vary across studies, but still rewarding insights start to emerge. Our work is one step toward that goal. Our overall conclusion is that open source options in the medical field are still far behind the highly acknowledged open source products in other domains, e.g. operating systems market share. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Confirmatory Factor Analysis Alternative: Free, Accessible CBID Software.

PubMed

Bott, Marjorie; Karanevich, Alex G; Garrard, Lili; Price, Larry R; Mudaranthakam, Dinesh Pal; Gajewski, Byron

2018-02-01

New software that performs Classical and Bayesian Instrument Development (CBID) is reported that seamlessly integrates expert (content validity) and participant data (construct validity) to produce entire reliability estimates with smaller sample requirements. The free CBID software can be accessed through a website and used by clinical investigators in new instrument development. Demonstrations are presented of the three approaches using the CBID software: (a) traditional confirmatory factor analysis (CFA), (b) Bayesian CFA using flat uninformative prior, and (c) Bayesian CFA using content expert data (informative prior). Outcomes of usability testing demonstrate the need to make the user-friendly, free CBID software available to interdisciplinary researchers. CBID has the potential to be a new and expeditious method for instrument development, adding to our current measurement toolbox. This allows for the development of new instruments for measuring determinants of health in smaller diverse populations or populations of rare diseases.

A Validation Framework for the Long Term Preservation of High Energy Physics Data

NASA Astrophysics Data System (ADS)

Ozerov, Dmitri; South, David M.

2014-06-01

The study group on data preservation in high energy physics, DPHEP, is moving to a new collaboration structure, which will focus on the implementation of preservation projects, such as those described in the group's large scale report published in 2012. One such project is the development of a validation framework, which checks the compatibility of evolving computing environments and technologies with the experiments software for as long as possible, with the aim of substantially extending the lifetime of the analysis software, and hence of the usability of the data. The framework is designed to automatically test and validate the software and data of an experiment against changes and upgrades to the computing environment, as well as changes to the experiment software itself. Technically, this is realised using a framework capable of hosting a number of virtual machine images, built with different configurations of operating systems and the relevant software, including any necessary external dependencies.

Evaluation of the Next-Gen Exercise Software Interface in the NEEMO Analog

NASA Technical Reports Server (NTRS)

Hanson, Andrea; Kalogera, Kent; Sandor, Aniko; Hardy, Marc; Frank, Andrew; English, Kirk; Williams, Thomas; Perera, Jeevan; Amonette, William

2017-01-01

NSBRI (National Space Biomedical Research Institute) funded research grant to develop the 'NextGen' exercise software for the NEEMO (NASA Extreme Environment Mission Operations) analog. Develop a software architecture to integrate instructional, motivational and socialization techniques into a common portal to enhance exercise countermeasures in remote environments. Increase user efficiency and satisfaction, and institute commonality across multiple exercise systems. Utilized GUI (Graphical User Interface) design principals focused on intuitive ease of use to minimize training time and realize early user efficiency. Project requirement to test the software in an analog environment. Top Level Project Aims: 1) Improve the usability of crew interface software to exercise CMS (Crew Management System) through common app-like interfaces. 2) Introduce virtual instructional motion training. 3) Use virtual environment to provide remote socialization with family and friends, improve exercise technique, adherence, motivation and ultimately performance outcomes.

Usability evaluation with mental health professionals and young people to develop an Internet-based cognitive-behaviour therapy program for adolescents with anxiety disorders.

PubMed

Wozney, Lori; Baxter, Pamela; Newton, Amanda S

2015-12-16

Use of the Internet to deliver cognitive behavioural therapy, a frontline treatment for anxiety disorders, is emerging as an option to increase access to treatment among adolescents with anxiety disorders. This study examined the usability of the Internet-based component of Breathe, a CBT program designed for adolescents with mild to moderate anxiety and impairments. A mixed-method usability testing design with semi-structured interviews, task completion, and survey by trained usability moderators was undertaken with two interactive cycles to determine the usability (ease of use, efficiency, errors, and user satisfaction) of the user interface and content areas of the program. Purposeful sampling was used to recruit mental health clinicians with expertise in treating adolescent anxiety disorders and young people aged 15 to 24 years involved. Testing involved using Web-conferencing software that allowed remote participation through personal computers. Two testing cycles involved participants completing structured 'think aloud' and 'cognitive walkthrough' tasks within the program. At the end of each cycle participants completed a 15-item global usability evaluation survey and were asked a series of open-ended questions. Descriptive and simple content analyses were used to identify and score usability issues for frequency and severity. Five clinicians and four young people (all < 20 years of age) participated. Most participants described their computer skills as 'good' (60% clinicians, 50% young people), and attitudes toward Internet-based health care ranged from negative (75% young people) to positive (60% clinicians, 25% young people). Scores from the global usability evaluation after both testing cycles ranged from 3.5 to 5 out of 5 in strong agreement/support of the program in terms of user performance indicators (i.e., learnability, efficiency and number of errors) and user satisfaction. Participants were able to complete all critical tasks with minimal errors. Errors and issues identified during testing were predominantly around enhancements to the visual design and navigational support. Opinions across usability elements did not differ between young people and clinician participants. A multi-method remote usability approach provided the opportunity to improve the technical interface, therapeutic messaging and user experience of an Internet-based treatment program for adolescent anxiety disorders.

Software Prototyping

PubMed Central

Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

2016-01-01

Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

SU-F-J-72: A Clinical Usable Integrated Contouring Quality Evaluation Software for Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, S; Dolly, S; Cai, B

Purpose: To introduce the Auto Contour Evaluation (ACE) software, which is the clinical usable, user friendly, efficient and all-in-one toolbox for automatically identify common contouring errors in radiotherapy treatment planning using supervised machine learning techniques. Methods: ACE is developed with C# using Microsoft .Net framework and Windows Presentation Foundation (WPF) for elegant GUI design and smooth GUI transition animations through the integration of graphics engines and high dots per inch (DPI) settings on modern high resolution monitors. The industrial standard software design pattern, Model-View-ViewModel (MVVM) pattern, is chosen to be the major architecture of ACE for neat coding structure, deepmore » modularization, easy maintainability and seamless communication with other clinical software. ACE consists of 1) a patient data importing module integrated with clinical patient database server, 2) a 2D DICOM image and RT structure simultaneously displaying module, 3) a 3D RT structure visualization module using Visualization Toolkit or VTK library and 4) a contour evaluation module using supervised pattern recognition algorithms to detect contouring errors and display detection results. ACE relies on supervised learning algorithms to handle all image processing and data processing jobs. Implementations of related algorithms are powered by Accord.Net scientific computing library for better efficiency and effectiveness. Results: ACE can take patient’s CT images and RT structures from commercial treatment planning software via direct user input or from patients’ database. All functionalities including 2D and 3D image visualization and RT contours error detection have been demonstrated with real clinical patient cases. Conclusion: ACE implements supervised learning algorithms and combines image processing and graphical visualization modules for RT contours verification. ACE has great potential for automated radiotherapy contouring quality verification. Structured with MVVM pattern, it is highly maintainable and extensible, and support smooth connections with other clinical software tools.« less

Usability Assessment of the Missouri Cancer Registry's Published Interactive Mapping Reports: Round One.

PubMed

Ben Ramadan, Awatef Ahmed; Jackson-Thompson, Jeannette; Schmaltz, Chester Lee

2017-08-04

 Many users of spatial data have difficulty interpreting information in health-related spatial reports. The Missouri Cancer Registry and Research Center (MCR-ARC) has produced interactive reports for several years. These reports have never been tested for usability.  The aims of this study were to: (1) conduct a multi-approach usability testing study to understand ease of use (user friendliness) and user satisfaction; and (2) evaluate the usability of MCR-ARC's published InstantAtlas reports.   An institutional review board (IRB) approved mixed methodology usability testing study using a convenience sample of health professionals. A recruiting email was sent to faculty in the Master of Public Health program and to faculty and staff in the Department of Health Management and Informatics at the University of Missouri-Columbia. The study included 7 participants. The test included a pretest questionnaire, a multi-task usability test, and the System Usability Scale (SUS). Also, the researchers collected participants' comments about the tested maps immediately after every trial. Software was used to record the computer screen during the trial and the participants' spoken comments. Several performance and usability metrics were measured to evaluate the usability of MCR-ARC's published mapping reports. Of the 10 assigned tasks, 6 reached a 100% completion success rate, and this outcome was relative to the complexity of the tasks. The simple tasks were handled more efficiently than the complicated tasks. The SUS score ranged between 20-100 points, with an average of 62.7 points and a median of 50.5 points. The tested maps' effectiveness outcomes were better than the efficiency and satisfaction outcomes. There was a statistically significant relationship between the subjects' performance on the study test and the users' previous experience with geographic information system (GIS) tools (P=.03). There were no statistically significant relationships between users' performance and satisfaction and their education level, work type, or previous experience in health care (P>.05). There were strong positive correlations between the three measured usability elements. The tested maps should undergo an extensive refining and updating to overcome all the discovered usability issues and meet the perspectives and needs of the tested maps' potential users. The study results might convey the perspectives of academic health professionals toward GIS health data. We need to conduct a second-round usability study with public health practitioners and cancer professionals who use GIS tools on a routine basis. Usability testing should be conducted before and after releasing MCR-ARC's maps in the future. ©Awatef Ahmed Ben Ramadan, Jeannette Jackson-Thompson, Chester Lee Schmaltz. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 04.08.2017.

Usability Assessment of the Missouri Cancer Registry’s Published Interactive Mapping Reports: Round One

PubMed Central

Jackson-Thompson, Jeannette; Schmaltz, Chester Lee

2017-01-01

Background  Many users of spatial data have difficulty interpreting information in health-related spatial reports. The Missouri Cancer Registry and Research Center (MCR-ARC) has produced interactive reports for several years. These reports have never been tested for usability. Objective  The aims of this study were to: (1) conduct a multi-approach usability testing study to understand ease of use (user friendliness) and user satisfaction; and (2) evaluate the usability of MCR-ARC’s published InstantAtlas reports. Methods   An institutional review board (IRB) approved mixed methodology usability testing study using a convenience sample of health professionals. A recruiting email was sent to faculty in the Master of Public Health program and to faculty and staff in the Department of Health Management and Informatics at the University of Missouri-Columbia. The study included 7 participants. The test included a pretest questionnaire, a multi-task usability test, and the System Usability Scale (SUS). Also, the researchers collected participants’ comments about the tested maps immediately after every trial. Software was used to record the computer screen during the trial and the participants’ spoken comments. Several performance and usability metrics were measured to evaluate the usability of MCR-ARC’s published mapping reports. Results Of the 10 assigned tasks, 6 reached a 100% completion success rate, and this outcome was relative to the complexity of the tasks. The simple tasks were handled more efficiently than the complicated tasks. The SUS score ranged between 20-100 points, with an average of 62.7 points and a median of 50.5 points. The tested maps’ effectiveness outcomes were better than the efficiency and satisfaction outcomes. There was a statistically significant relationship between the subjects’ performance on the study test and the users’ previous experience with geographic information system (GIS) tools (P=.03). There were no statistically significant relationships between users’ performance and satisfaction and their education level, work type, or previous experience in health care (P>.05). There were strong positive correlations between the three measured usability elements. Conclusions The tested maps should undergo an extensive refining and updating to overcome all the discovered usability issues and meet the perspectives and needs of the tested maps’ potential users. The study results might convey the perspectives of academic health professionals toward GIS health data. We need to conduct a second-round usability study with public health practitioners and cancer professionals who use GIS tools on a routine basis. Usability testing should be conducted before and after releasing MCR-ARC’s maps in the future. PMID:28778842

Enabling Data Discovery and Reuse by Improving Software Usability:Data Science Experiences, Lessons, and Gaps

NASA Astrophysics Data System (ADS)

Rosati, A.; Yarmey, L.

2014-12-01

It is well understood that a good data scientist needs domain science, analysis, programming, and communication skills to create finished data products, visualizations, and reports. Articles and blogs tout the need for "expert" skill levels in domain knowledge, statistics, storytelling, graphic design, technology…and the list goes on. Since it seems impossible that one person would encompass all these skills, it is often suggested that data science be done by a team instead of an individual. This research into, and experience with, data product design offers an augmented definition - one that elevates relationships and engagement with the final user of a product. Essentially, no matter how fantastic or technically advanced a product appears, the intended audience of that product must be able to understand, use, and find value in the product in order for it to be considered a success. Usability is often misunderstood and seen as common sense or common knowledge, but it is actually an important and challenging piece of product development. This paper describes the National Snow and Ice Data Center's process to usability test the Arctic Data Explorer (ADE). The ADE is a federated data search tool for interdisciplinary Arctic science data that has been improved in features, appearance, functionality, and quality through a series of strategic and targeted usability testing and assessments. Based on the results, it is recommended that usability testing be incorporated into the skill set of each data science team.

Development of the UTAUT2 model to measure the acceptance of medical laboratory portals by patients in Shiraz

PubMed Central

Ravangard, Ramin; Kazemi, Zhila; Abbasali, Somaye Zaker; Sharifian, Roxana; Monem, Hossein

2017-01-01

Introduction One of the main stages for achieving the success is acceptance of technology by its users. Hence, identifying the effective factors in successful acceptance of information technology is necessary and vital. One such factor is usability. This study aimed to investigate the software usability in the “Unified Theory of Acceptance and Use of Technology 2 (UTAUT2)” model in patients’ use of medical diagnosis laboratories’ electronic portals in 2015. Methods This cross-sectional study was carried out on 170 patients in 2015. A 27-item questionnaire adopted from previous research and the Usability Evaluation questionnaire were used for data collection. Data were analyzed using Structural Equation Modeling (SEM), with Partial Least Squares approach by SPSS 20.0 and Smart-PLS V3.0. Results The results showed that the construct of intention to use had significant associations with price value (t-value=2.77), hedonic motivation (t-value=4.46), habit (t-value=1.99) and usability (t-value=5.2), as well as the construct of usage behavior with usability (t-value=3.45) and intention to use (t-value=2.03). Conclusion Considering the results of this study, the following recommendations can be made in order for the higher use of portals by the patients: informing patients about the advantages of using these portals, designing portals in a simple and understandable form, increasing the portals’ attractiveness, etc. PMID:28465819

Software Process Assurance for Complex Electronics (SPACE)

NASA Technical Reports Server (NTRS)

Plastow, Richard A.

2007-01-01

Complex Electronics (CE) are now programmed to perform tasks that were previously handled in software, such as communication protocols. Many of the methods used to develop software bare a close resemblance to CE development. For instance, Field Programmable Gate Arrays (FPGAs) can have over a million logic gates while system-on-chip (SOC) devices can combine a microprocessor, input and output channels, and sometimes an FPGA for programmability. With this increased intricacy, the possibility of software-like bugs such as incorrect design, logic, and unexpected interactions within the logic is great. Since CE devices are obscuring the hardware/software boundary, we propose that mature software methodologies may be utilized with slight modifications in the development of these devices. Software Process Assurance for Complex Electronics (SPACE) is a research project that looks at using standardized S/W Assurance/Engineering practices to provide an assurance framework for development activities. Tools such as checklists, best practices and techniques can be used to detect missing requirements and bugs earlier in the development cycle creating a development process for CE that will be more easily maintained, consistent and configurable based on the device used.

An Integrated Software Package to Enable Predictive Simulation Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yousu; Fitzhenry, Erin B.; Jin, Shuangshuang

The power grid is increasing in complexity due to the deployment of smart grid technologies. Such technologies vastly increase the size and complexity of power grid systems for simulation and modeling. This increasing complexity necessitates not only the use of high-performance-computing (HPC) techniques, but a smooth, well-integrated interplay between HPC applications. This paper presents a new integrated software package that integrates HPC applications and a web-based visualization tool based on a middleware framework. This framework can support the data communication between different applications. Case studies with a large power system demonstrate the predictive capability brought by the integrated software package,more » as well as the better situational awareness provided by the web-based visualization tool in a live mode. Test results validate the effectiveness and usability of the integrated software package.« less

Technology Review: Website Usability Testing Software-Improving User Experience and Satisfaction with Community College Websites

ERIC Educational Resources Information Center

Dishman, Marcie

2015-01-01

The Internet is a critical tool for higher education institutions as they rely upon their web presence for interaction with multiple stakeholders, including current and prospective students, parents, faculty and staff, and the community (Hong & Kiousis, 2007). As colleges count upon their websites to serve as the primary medium for presenting…

Safe Surgery Trainer

DTIC Science & Technology

2014-11-15

design, testing, and development. b) Prototype Development – Continue developing SST software, game -flow, and mechanics. Continue developing art...refined learning objectives into measurement outlines. Update IRB submissions, edit usability game play study, and update I/ITSEC IRB. Provide case...minimal or near zero. 9) Related Activities a) Presenting at the Design of Learning Games Community Workshop, at I/ITSEC, Wednesday, Dec 3 rd

Science of Security Lablet - Scalability and Usability

DTIC Science & Technology

2014-12-16

mobile computing [19]. However, the high-level infrastructure design and our own implementation (both described throughout this paper) can easily...critical and infrastructural systems demands high levels of sophistication in the technical aspects of cybersecurity, software and hardware design...Forget, S. Komanduri, Alessandro Acquisti, Nicolas Christin, Lorrie Cranor, Rahul Telang. "Security Behavior Observatory: Infrastructure for Long-term

Usability Testing of an Interactive Virtual Reality Distraction Intervention to Reduce Procedural Pain in Children and Adolescents With Cancer.

PubMed

Birnie, Kathryn A; Kulandaivelu, Yalinie; Jibb, Lindsay; Hroch, Petra; Positano, Karyn; Robertson, Simon; Campbell, Fiona; Abla, Oussama; Stinson, Jennifer

2018-06-01

Needle procedures are among the most distressing aspects of pediatric cancer-related treatment. Virtual reality (VR) distraction offers promise for needle-related pain and distress given its highly immersive and interactive virtual environment. This study assessed the usability (ease of use and understanding, acceptability) of a custom VR intervention for children with cancer undergoing implantable venous access device (IVAD) needle insertion. Three iterative cycles of mixed-method usability testing with semistructured interviews were undertaken to refine the VR. Participants included 17 children and adolescents (8-18 years old) with cancer who used the VR intervention prior to or during IVAD access. Most participants reported the VR as easy to use (82%) and understand (94%), and would like to use it during subsequent needle procedures (94%). Based on usability testing, refinements were made to VR hardware, software, and clinical implementation. Refinements focused on increasing responsiveness, interaction, and immersion of the VR program, reducing head movement for VR interaction, and enabling participant alerts to steps of the procedure by clinical staff. No adverse events of nausea or dizziness were reported. The VR intervention was deemed acceptable and safe. Next steps include assessing feasibility and effectiveness of the VR intervention for pain and distress.

Developing iCare v.1.0: an academic electronic health record.

PubMed

Wyatt, Tami H; Li, Xueping; Indranoi, Chayawat; Bell, Matthew

2012-06-01

An electronic health record application, iCare v.1.0, was developed and tested that allows data input and retrieval while tracking student performance over time. The development and usability testing of iCare v.1.0 followed a rapid prototyping software development and testing model. Once the functionality was tested by engineers, the usability and feasibility testing began with a convenience sample of focus group members including undergraduate and graduate students and faculty. Three focus groups were created, and four subjects participated in each focus group (n = 12). Nielsen's usability heuristics and methods of evaluation were used to evaluate data captured from each focus group. Overall, users wanted a full-featured electronic health record with features that coached or guided users. The earliest versions of iCare v.1.0 did not provide help features and prompts to guide students but were later added. Future versions will incorporate a full-featured help section. The interface and design of iCare v.1.0 are similar to professional electronic health record applications. As a result of this usability study, future versions of iCare will include more robust help features along with advanced reporting and elements specific to specialty populations such as pediatrics and mental health services.

Usability and utility evaluation of the web-based "Should I Start Insulin?" patient decision aid for patients with type 2 diabetes among older people.

PubMed

Lee, Yew Kong; Lee, Ping Yein; Ng, Chirk Jenn; Teo, Chin Hai; Abu Bakar, Ahmad Ihsan; Abdullah, Khatijah Lim; Khoo, Ee Ming; Hanafi, Nik Sherina; Low, Wah Yun; Chiew, Thiam Kian

2018-01-01

This study aimed to evaluate the usability (ease of use) and utility (impact on user's decision-making process) of a web-based patient decision aid (PDA) among older-age users. A pragmatic, qualitative research design was used. We recruited patients with type 2 diabetes who were at the point of making a decision about starting insulin from a tertiary teaching hospital in Malaysia in 2014. Computer screen recording software was used to record the website browsing session and in-depth interviews were conducted while playing back the website recording. The interviews were analyzed using the framework approach to identify usability and utility issues. Three cycles of iteration were conducted until no more major issues emerged. Thirteen patients participated: median age 65 years old, 10 men, and nine had secondary education/diploma, four were graduates/had postgraduate degree. Four usability issues were identified (navigation between pages and sections, a layout with open display, simple language, and equipment preferences). For utility, participants commented that the website influenced their decision about insulin in three ways: it had provided information about insulin, it helped them deliberate choices using the option-attribute matrix, and it allowed them to involve others in their decision making by sharing the PDA summary printout.

Usability testing of a monitoring and feedback tool to stimulate physical activity.

PubMed

van der Weegen, Sanne; Verwey, Renée; Tange, Huibert J; Spreeuwenberg, Marieke D; de Witte, Luc P

2014-01-01

A MONITORING AND FEEDBACK TOOL TO STIMULATE PHYSICAL ACTIVITY, CONSISTING OF AN ACTIVITY SENSOR, SMARTPHONE APPLICATION (APP), AND WEBSITE FOR PATIENTS AND THEIR PRACTICE NURSES, HAS BEEN DEVELOPED: the 'It's LiFe!' tool. In this study the usability of the tool was evaluated by technology experts and end users (people with chronic obstructive pulmonary disease or type 2 diabetes, with ages from 40-70 years), to improve the user interfaces and content of the tool. THE STUDY HAD FOUR PHASES: 1) a heuristic evaluation with six technology experts; 2) a usability test in a laboratory by five patients; 3) a pilot in real life wherein 20 patients used the tool for 3 months; and 4) a final lab test by five patients. In both lab tests (phases 2 and 4) qualitative data were collected through a thinking-aloud procedure and video recordings, and quantitative data through questions about task complexity, text comprehensiveness, and readability. In addition, the post-study system usability questionnaire (PSSUQ) was completed for the app and the website. In the pilot test (phase 3), all patients were interviewed three times and the Software Usability Measurement Inventory (SUMI) was completed. After each phase, improvements were made, mainly to the layout and text. The main improvement was a refresh button for active data synchronization between activity sensor, app, and server, implemented after connectivity problems in the pilot test. The mean score on the PSSUQ for the website improved from 5.6 (standard deviation [SD] 1.3) to 6.5 (SD 0.5), and for the app from 5.4 (SD 1.5) to 6.2 (SD 1.1). Satisfaction in the pilot was not very high according to the SUMI. The use of laboratory versus real-life tests and expert-based versus user-based tests revealed a wide range of usability issues. The usability of the It's LiFe! tool improved considerably during the study.

Experience-Sampling Methodology with a Mobile Device in Fibromyalgia

PubMed Central

Diana, Castilla; Cristina, Botella; Azucena, García-Palacios; Luis, Farfallini; Ignacio, Miralles

2012-01-01

This work describes the usability studies conducted in the development of an experience-sampling methodology (ESM) system running in a mobile device. The goal of the system is to improve the accuracy and ecology in gathering daily self-report data in individuals suffering a chronic pain condition, fibromyalgia. The usability studies showed that the developed software to conduct ESM with mobile devices (smartphones, cell phones) can be successfully used by individuals with fibromyalgia of different ages and with low level of expertise in the use of information and communication technologies. 100% of users completed the tasks successfully, although some have completely illiterate. Also there seems to be a clear difference in the way of interaction obtained in the two studies carried out. PMID:23304132

CMMAD Usability Case Study in Support of Countermine and Hazard Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Victor G. Walker; David I. Gertman

2010-04-01

During field trials, operator usability data were collected in support of lane clearing missions and hazard sensing for two robot platforms with Robot Intelligence Kernel (RIK) software and sensor scanning payloads onboard. The tests featured autonomous and shared robot autonomy levels where tasking of the robot used a graphical interface featuring mine location and sensor readings. The goal of this work was to provide insights that could be used to further technology development. The efficacy of countermine systems in terms of mobility, search, path planning, detection, and localization were assessed. Findings from objective and subjective operator interaction measures are reviewedmore » along with commentary from soldiers having taken part in the study who strongly endorse the system.« less

EASAMS' Ariane 5 on-board software experience

NASA Astrophysics Data System (ADS)

Birnie, Steven Andrew

The design and development of the prototype flight software for the Ariane 5 satellite launch vehicle is considered. This was specified as being representative of the eventual real flight program in terms of timing constraints and target computer loading. The usability of HOOD (Hierarchical Object Oriented Design) and Ada for development of such preemptive multitasking computer programs was verified. Features of the prototype development included: design methods supplementary to HOOD for representation of concurrency aspects; visibility of Ada enumerated type literals across HOOD parent-child interfaces; deterministic timings achieved by modification of Ada delays; and linking of interrupts to Ada task entries.

End effector monitoring system: An illustrated case of operational prototyping

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Land, Sherry A.; Thronesbery, Carroll

1994-01-01

Operational prototyping is introduced to help developers apply software innovations to real-world problems, to help users articulate requirements, and to help develop more usable software. Operational prototyping has been applied to an expert system development project. The expert system supports fault detection and management during grappling operations of the Space Shuttle payload bay arm. The dynamic exchanges among operational prototyping team members are illustrated in a specific prototyping session. We discuss the requirements for operational prototyping technology, types of projects for which operational prototyping is best suited and when it should be applied to those projects.

Using Cesium for 3D Thematic Visualisations on the Web

NASA Astrophysics Data System (ADS)

Gede, Mátyás

2018-05-01

Cesium (http://cesiumjs.org) is an open source, WebGL-based JavaScript library for virtual globes and 3D maps. It is an excellent tool for 3D thematic visualisations, but to use its full functionality it has to be feed with its own file format, CZML. Unfortunately, this format is not yet supported by any major GIS software. This paper intro- duces a plugin for QGIS, developed by the author, which facilitates the creation of CZML file for various types of visualisations. The usability of Cesium is also examined in various hardware/software environments.

Human-centered design of a personal health record system for metabolic syndrome management based on the ISO 9241-210:2010 standard.

PubMed

Farinango, Charic D; Benavides, Juan S; Cerón, Jesús D; López, Diego M; Álvarez, Rosa E

2018-01-01

Previous studies have demonstrated the effectiveness of information and communication technologies to support healthy lifestyle interventions. In particular, personal health record systems (PHR-Ss) empower self-care, essential to support lifestyle changes. Approaches such as the user-centered design (UCD), which is already a standard within the software industry (ISO 9241-210:2010), provide specifications and guidelines to guarantee user acceptance and quality of eHealth systems. However, no single PHR-S for metabolic syndrome (MS) developed following the recommendations of the ISO 9241-210:2010 specification has been found in the literature. The aim of this study was to describe the development of a PHR-S for the management of MS according to the principles and recommendations of the ISO 9241-210 standard. The proposed PHR-S was developed using a formal software development process which, in addition to the traditional activities of any software process, included the principles and recommendations of the ISO 9241-210 standard. To gather user information, a survey sample of 1,187 individuals, eight interviews, and a focus group with seven people were performed. Throughout five iterations, three prototypes were built. Potential users of each system evaluated each prototype. The quality attributes of efficiency, effectiveness, and user satisfaction were assessed using metrics defined in the ISO/IEC 25022 standard. The following results were obtained: 1) a technology profile from 1,187 individuals at risk for MS from the city of Popayan, Colombia, identifying that 75.2% of the people use the Internet and 51% had a smartphone; 2) a PHR-S to manage MS developed (the PHR-S has the following five main functionalities: record the five MS risk factors, share these measures with health care professionals, and three educational modules on nutrition, stress management, and a physical activity); and 3) usability tests on each prototype obtaining the following results: 100% effectiveness, 100% efficiency, and 84.2 points in the system usability scale. The software development methodology used was based on the ISO 9241-210 standard, which allowed the development team to maintain a focus on user's needs and requirements throughout the project, which resulted in an increased satisfaction and acceptance of the system. Additionally, the establishment of a multidisciplinary team allowed the application of considerations not only from the disciplines of software engineering and health sciences but also from other disciplines such as graphical design and media communication. Finally, usability testing allowed the observation of flaws in the designs, which helped to improve the solution.

Filling the Assurance Gap on Complex Electronics

NASA Technical Reports Server (NTRS)

Plastow, Richard A.

2007-01-01

Many of the methods used to develop software bare a close resemblance to Complex Electronics (CE) development. CE are now programmed to perform tasks that were previously handled by software, such as communication protocols. For example, the James Webb Space Telescope will use Field Programmable Gate Arrays (FPGAs), which can have over a million logic gates, to send telemetry. System-on-chip (SoC) devices, another type of complex electronics, can combine a microprocessor, input and output channels, and sometimes an FPGA for programmability. With this increased intricacy, the possibility of software-like bugs such as incorrect design, logic, and unexpected interactions within the logic is great. Since CE devices are obscuring the hardware/software boundary, mature software methodologies have been proposed, with slight modifications, to develop these devices. By using standardized S/W Engineering methods such as checklists, missing requirements and bugs can be detected earlier in the development cycle, thus creating a development process for CE that can be easily maintained and configurable based on the device used.

The 2006 NESCent Phyloinformatics Hackathon: A Field Report

PubMed Central

Lapp, Hilmar; Bala, Sendu; Balhoff, James P.; Bouck, Amy; Goto, Naohisa; Holder, Mark; Holland, Richard; Holloway, Alisha; Katayama, Toshiaki; Lewis, Paul O.; Mackey, Aaron J.; Osborne, Brian I.; Piel, William H.; Kosakovsky Pond, Sergei L.; Poon, Art F.Y.; Qiu, Wei-Gang; Stajich, Jason E.; Stoltzfus, Arlin; Thierer, Tobias; Vilella, Albert J.; Vos, Rutger A.; Zmasek, Christian M.; Zwickl, Derrick J.; Vision, Todd J.

2007-01-01

In December, 2006, a group of 26 software developers from some of the most widely used life science programming toolkits and phylogenetic software projects converged on Durham, North Carolina, for a Phyloinformatics Hackathon, an intense five-day collaborative software coding event sponsored by the National Evolutionary Synthesis Center (NESCent). The goal was to help researchers to integrate multiple phylogenetic software tools into automated workflows. Participants addressed deficiencies in interoperability between programs by implementing “glue code” and improving support for phylogenetic data exchange standards (particularly NEXUS) across the toolkits. The work was guided by use-cases compiled in advance by both developers and users, and the code was documented as it was developed. The resulting software is freely available for both users and developers through incorporation into the distributions of several widely-used open-source toolkits. We explain the motivation for the hackathon, how it was organized, and discuss some of the outcomes and lessons learned. We conclude that hackathons are an effective mode of solving problems in software interoperability and usability, and are underutilized in scientific software development.

Survey of Verification and Validation Techniques for Small Satellite Software Development

NASA Technical Reports Server (NTRS)

Jacklin, Stephen A.

2015-01-01

The purpose of this paper is to provide an overview of the current trends and practices in small-satellite software verification and validation. This document is not intended to promote a specific software assurance method. Rather, it seeks to present an unbiased survey of software assurance methods used to verify and validate small satellite software and to make mention of the benefits and value of each approach. These methods include simulation and testing, verification and validation with model-based design, formal methods, and fault-tolerant software design with run-time monitoring. Although the literature reveals that simulation and testing has by far the longest legacy, model-based design methods are proving to be useful for software verification and validation. Some work in formal methods, though not widely used for any satellites, may offer new ways to improve small satellite software verification and validation. These methods need to be further advanced to deal with the state explosion problem and to make them more usable by small-satellite software engineers to be regularly applied to software verification. Last, it is explained how run-time monitoring, combined with fault-tolerant software design methods, provides an important means to detect and correct software errors that escape the verification process or those errors that are produced after launch through the effects of ionizing radiation.

Overview of the TriBITS Lifecycle Model: Lean/Agile Software Lifecycle Model for Research-based Computational Science and Engineering Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Roscoe A; Heroux, Dr. Michael A; Willenbring, James

2012-01-01

Software lifecycles are becoming an increasingly important issue for computational science & engineering (CSE) software. The process by which a piece of CSE software begins life as a set of research requirements and then matures into a trusted high-quality capability is both commonplace and extremely challenging. Although an implicit lifecycle is obviously being used in any effort, the challenges of this process--respecting the competing needs of research vs. production--cannot be overstated. Here we describe a proposal for a well-defined software lifecycle process based on modern Lean/Agile software engineering principles. What we propose is appropriate for many CSE software projects thatmore » are initially heavily focused on research but also are expected to eventually produce usable high-quality capabilities. The model is related to TriBITS, a build, integration and testing system, which serves as a strong foundation for this lifecycle model, and aspects of this lifecycle model are ingrained in the TriBITS system. Indeed this lifecycle process, if followed, will enable large-scale sustainable integration of many complex CSE software efforts across several institutions.« less

Fourteen Years of R/qtl: Just Barely Sustainable

PubMed Central

Broman, Karl W.

2014-01-01

R/qtl is an R package for mapping quantitative trait loci (genetic loci that contribute to variation in quantitative traits) in experimental crosses. Its development began in 2000. There have been 38 software releases since 2001. The latest release contains 35k lines of R code and 24k lines of C code, plus 15k lines of code for the documentation. Challenges in the development and maintenance of the software are discussed. A key to the success of R/qtl is that it remains a central tool for the chief developer's own research work, and so its maintenance is of selfish importance. PMID:25364504

"Think aloud" and "Near live" usability testing of two complex clinical decision support tools.

PubMed

Richardson, Safiya; Mishuris, Rebecca; O'Connell, Alexander; Feldstein, David; Hess, Rachel; Smith, Paul; McCullagh, Lauren; McGinn, Thomas; Mann, Devin

2017-10-01

Low provider adoption continues to be a significant barrier to realizing the potential of clinical decision support. "Think Aloud" and "Near Live" usability testing were conducted on two clinical decision support tools. Each was composed of an alert, a clinical prediction rule which estimated risk of either group A Streptococcus pharyngitis or pneumonia and an automatic order set based on risk. The objective of this study was to further understanding of the facilitators of usability and to evaluate the types of additional information gained from proceeding to "Near Live" testing after completing "Think Aloud". This was a qualitative observational study conducted at a large academic health care system with 12 primary care providers. During "Think Aloud" testing, participants were provided with written clinical scenarios and asked to verbalize their thought process while interacting with the tool. During "Near Live" testing participants interacted with a mock patient. Morae usability software was used to record full screen capture and audio during every session. Participant comments were placed into coding categories and analyzed for generalizable themes. Themes were compared across usability methods. "Think Aloud" and "Near Live" usability testing generated similar themes under the coding categories visibility, workflow, content, understand-ability and navigation. However, they generated significantly different themes under the coding categories usability, practical usefulness and medical usefulness. During both types of testing participants found the tool easier to use when important text was distinct in its appearance, alerts were passive and appropriately timed, content was up to date, language was clear and simple, and each component of the tool included obvious indicators of next steps. Participant comments reflected higher expectations for usability and usefulness during "Near Live" testing. For example, visit aids, such as automatically generated order sets, were felt to be less useful during "Near-Live" testing because they would not be all inclusive for the visit. These complementary types of usability testing generated unique and generalizable insights. Feedback during "Think Aloud" testing primarily helped to improve the tools' ease of use. The additional feedback from "Near Live" testing, which mimics a real clinical encounter, was helpful for eliciting key barriers and facilitators to provider workflow and adoption. Copyright © 2017 Elsevier B.V. All rights reserved.

The Effectiveness and Usability of the Educational Software on Concept Education for Young Children with Impaired Hearing

ERIC Educational Resources Information Center

Goker, Hanife; Ozaydin, Latife; Tekedere, Hakan

2016-01-01

Early intervention and early education have a special place in educating the children with Impaired Hearing (IH). The advancements in information and communication technologies have led to adopting the view that such technologies could be applied in the educational process of the children with IH. Besides, the positive results acquired in the…

A Cross-Cultural Usability Study on the Internationalization of User Interfaces Based on an Empirical Five Factor Model

ERIC Educational Resources Information Center

Chakraborty, Joyram

2009-01-01

With the internationalization of e-commerce, it is no longer viable to design one user interface for all environments. Web-based applications and services can be accessed from all over the globe. To account for this globalization process, software developers need to understand that simply accounting for language translation of their websites for…

A Comparative Study on Java Technologies for Focus and Cursor Handling in Accessible Dynamic Interactions.

PubMed

Jitngernmadan, Prajaks; Miesenberger, Klaus

2015-01-01

For an interactive application, supporting and guiding the user in fulfilling tasks is most important. The behavior of the application that will guide users through the procedures until they finish the task has to be designed intuitively and well guiding, especially if the users has only restricted or no access to the visual and spatial arrangement on the screen. Therefore, the focus/cursor management plays an important role for orientation and navigating through the interaction. In the frame of ongoing research on a software tool supporting blind people in more efficiently doing mathematical calculations, we researched how Java technologies support implementing an accessible Graphical User Interface (GUI) with an additional focus on usable accessibility in terms of guiding blind users through the process of solving mathematical calculations. We used Java Swing [1] and Eclipse SWT [2] APIs for creating a series of prototypes. We tested a) accessibility and usability of the prototypes for blind people when using screen reader software and refreshable Braille display and b) the implementation support to developers provided by both technologies. It turned out that Eclipse SWT API delivered best results under Windows operating system.

A Model for Usability Evaluation for the Development and Implementation of Consumer eHealth Interventions.

PubMed

Parry, David; Carter, Philip; Koziol-McLain, Jane; Feather, Jacqueline

2015-01-01

Consumer eHealth products are often used by people in their own homes or other settings without dedicated clinical supervision, and often with minimal training and limited support--much as eCommerce and eGovernment applications are currently deployed. Internet based self-care systems have been advocated for over a decade as a way to reduce costs and allow more convenient care, and--because of the expectation that they will be used to reduced health cost--, by increasing self-care and avoiding hospitalization. However, the history of consumer eHealth interventions is mixed, with many unsuccessful implementations. Many consumer eHealth products will form part of a broader complex intervention, with many possible benefits and effects on both individuals and society. This poster describes a model of consumer eHealth assessment based on multiple methods of usability evaluation at different stages in the design and fielding of eHealth systems. We argue that different methods of usability evaluation are able to give valuable insights into the likely effects of an intervention in a way that is congruent with software development processes.

Participatory interaction design in user requirements specification in healthcare.

PubMed

Martikainen, Susanna; Ikävalko, Pauliina; Korpela, Mikko

2010-01-01

Healthcare information systems are accused of poor usability even in the popular media in Finland. Doctors especially have been very critical and actively expressed their opinions in public. User involvement and user-centered design methods are seen as the key solution to usability problems. In this paper we describe a research case where participatory methods were experimented within healthcare information systems development in medicinal care in a hospital. The study was part of a larger research project on Activity-driven Information Systems Development in healthcare. The study started by finding out about and modeling the present state of medicinal care in the hospital. After that it was important to define and model the goal state. The goal state, facilitated by the would-be software package, was modeled with the help of user interface drawings as one way of prototyping. Traditional usability methods were extended during the study. According to the health professionals' feedback, the use of participatory and user-centered interaction design methods, particularly user interface drawings enabled them to describe their requirements and create common understanding with the system developers.

Workload measurement in a communication application operated through a P300-based brain-computer interface

NASA Astrophysics Data System (ADS)

Riccio, A.; Leotta, F.; Bianchi, L.; Aloise, F.; Zickler, C.; Hoogerwerf, E.-J.; Kübler, A.; Mattia, D.; Cincotti, F.

2011-04-01

Advancing the brain-computer interface (BCI) towards practical applications in technology-based assistive solutions for people with disabilities requires coping with problems of accessibility and usability to increase user acceptance and satisfaction. The main objective of this study was to introduce a usability-oriented approach in the assessment of BCI technology development by focusing on evaluation of the user's subjective workload and satisfaction. The secondary aim was to compare two applications for a P300-based BCI. Eight healthy subjects were asked to use an assistive technology solution which integrates the P300-based BCI with commercially available software under two conditions—visual stimuli needed to evoke the P300 response were either overlaid onto the application's graphical user interface or presented on a separate screen. The two conditions were compared for effectiveness (level of performance), efficiency (subjective workload measured by means of NASA-TXL) and satisfaction of the user. Although no significant difference in usability could be detected between the two conditions, the methodology proved to be an effective tool to highlight weaknesses in the technical solution.

Software Prototyping: A Case Report of Refining User Requirements for a Health Information Exchange Dashboard.

PubMed

Nelson, Scott D; Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R

2016-01-01

Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system.

An optimized web-based approach for collaborative stereoscopic medical visualization

PubMed Central

Kaspar, Mathias; Parsad, Nigel M; Silverstein, Jonathan C

2013-01-01

Objective Medical visualization tools have traditionally been constrained to tethered imaging workstations or proprietary client viewers, typically part of hospital radiology systems. To improve accessibility to real-time, remote, interactive, stereoscopic visualization and to enable collaboration among multiple viewing locations, we developed an open source approach requiring only a standard web browser with no added client-side software. Materials and Methods Our collaborative, web-based, stereoscopic, visualization system, CoWebViz, has been used successfully for the past 2 years at the University of Chicago to teach immersive virtual anatomy classes. It is a server application that streams server-side visualization applications to client front-ends, comprised solely of a standard web browser with no added software. Results We describe optimization considerations, usability, and performance results, which make CoWebViz practical for broad clinical use. We clarify technical advances including: enhanced threaded architecture, optimized visualization distribution algorithms, a wide range of supported stereoscopic presentation technologies, and the salient theoretical and empirical network parameters that affect our web-based visualization approach. Discussion The implementations demonstrate usability and performance benefits of a simple web-based approach for complex clinical visualization scenarios. Using this approach overcomes technical challenges that require third-party web browser plug-ins, resulting in the most lightweight client. Conclusions Compared to special software and hardware deployments, unmodified web browsers enhance remote user accessibility to interactive medical visualization. Whereas local hardware and software deployments may provide better interactivity than remote applications, our implementation demonstrates that a simplified, stable, client approach using standard web browsers is sufficient for high quality three-dimensional, stereoscopic, collaborative and interactive visualization. PMID:23048008

DOVIS 2.0: an efficient and easy to use parallel virtual screening tool based on AutoDock 4.0.

PubMed

Jiang, Xiaohui; Kumar, Kamal; Hu, Xin; Wallqvist, Anders; Reifman, Jaques

2008-09-08

Small-molecule docking is an important tool in studying receptor-ligand interactions and in identifying potential drug candidates. Previously, we developed a software tool (DOVIS) to perform large-scale virtual screening of small molecules in parallel on Linux clusters, using AutoDock 3.05 as the docking engine. DOVIS enables the seamless screening of millions of compounds on high-performance computing platforms. In this paper, we report significant advances in the software implementation of DOVIS 2.0, including enhanced screening capability, improved file system efficiency, and extended usability. To keep DOVIS up-to-date, we upgraded the software's docking engine to the more accurate AutoDock 4.0 code. We developed a new parallelization scheme to improve runtime efficiency and modified the AutoDock code to reduce excessive file operations during large-scale virtual screening jobs. We also implemented an algorithm to output docked ligands in an industry standard format, sd-file format, which can be easily interfaced with other modeling programs. Finally, we constructed a wrapper-script interface to enable automatic rescoring of docked ligands by arbitrarily selected third-party scoring programs. The significance of the new DOVIS 2.0 software compared with the previous version lies in its improved performance and usability. The new version makes the computation highly efficient by automating load balancing, significantly reducing excessive file operations by more than 95%, providing outputs that conform to industry standard sd-file format, and providing a general wrapper-script interface for rescoring of docked ligands. The new DOVIS 2.0 package is freely available to the public under the GNU General Public License.

The component-based architecture of the HELIOS medical software engineering environment.

PubMed

Degoulet, P; Jean, F C; Engelmann, U; Meinzer, H P; Baud, R; Sandblad, B; Wigertz, O; Le Meur, R; Jagermann, C

1994-12-01

The constitution of highly integrated health information networks and the growth of multimedia technologies raise new challenges for the development of medical applications. We describe in this paper the general architecture of the HELIOS medical software engineering environment devoted to the development and maintenance of multimedia distributed medical applications. HELIOS is made of a set of software components, federated by a communication channel called the HELIOS Unification Bus. The HELIOS kernel includes three main components, the Analysis-Design and Environment, the Object Information System and the Interface Manager. HELIOS services consist in a collection of toolkits providing the necessary facilities to medical application developers. They include Image Related services, a Natural Language Processor, a Decision Support System and Connection services. The project gives special attention to both object-oriented approaches and software re-usability that are considered crucial steps towards the development of more reliable, coherent and integrated applications.

Identification of Patient Safety Risks Associated with Electronic Health Records: A Software Quality Perspective.

PubMed

Virginio, Luiz A; Ricarte, Ivan Luiz Marques

2015-01-01

Although Electronic Health Records (EHR) can offer benefits to the health care process, there is a growing body of evidence that these systems can also incur risks to patient safety when developed or used improperly. This work is a literature review to identify these risks from a software quality perspective. Therefore, the risks were classified based on the ISO/IEC 25010 software quality model. The risks identified were related mainly to the characteristics of "functional suitability" (i.e., software bugs) and "usability" (i.e., interface prone to user error). This work elucidates the fact that EHR quality problems can adversely affect patient safety, resulting in errors such as incorrect patient identification, incorrect calculation of medication dosages, and lack of access to patient data. Therefore, the risks presented here provide the basis for developers and EHR regulating bodies to pay attention to the quality aspects of these systems that can result in patient harm.

An Evaluation of the Design and Usability of a Novel Robotic Bilateral Arm Rehabilitation Device for Patients with Stroke.

PubMed

Pei, Yu-Cheng; Chen, Jean-Lon; Wong, Alice M K; Tseng, Kevin C

2017-01-01

Case series. IV (case series). Robot-assisted therapy for upper limb rehabilitation is an emerging research topic and its design process must integrate engineering, neurological pathophysiology, and clinical needs. This study developed/evaluated the usefulness of a novel rehabilitation device, the MirrorPath , designed for the upper limb rehabilitation of patients with hemiplegic stroke. The process follows Tseng's methodology for innovative product design and development, namely two stages, device development and usability assessment. During the development process, the design was guided by patients' rehabilitation needs as defined by patients and their therapists. The design applied synchronic movement of the bilateral upper limbs, an approach that is compatible with the bilateral movement therapy and proprioceptive neuromuscular facilitation theories. MirrorPath consists of a robotic device that guides upper limb movement linked to a control module containing software controlling the robotic movement. Five healthy subjects were recruited in the pretest, and 4 patients, 4 caregivers, and 4 therapists were recruited in the formal test for usability. All recruited subjects were allocated to the test group, completed the evaluation, and their data were all analyzed. The total system usability scale score obtained from the patients, caregivers, and therapists was 71.8 ± 11.9, indicating a high level of usability and product acceptance. Following a standard development process, we could yield a design that meets clinical needs. This low-cost device provides a feasible platform for carrying out robot-assisted bilateral movement therapy of patients with hemiplegic stroke. identifier NCT02698605.

Usability Testing of a Computerized Communication Tool in a Diverse Urban Pediatric Population

PubMed Central

Tsimicalis, Argerie; Stone, Patricia W.; Bakken, Suzanne; Yoon, Sunmoo; Sands, Stephen; Porter, Rechelle; Ruland, Cornelia

2015-01-01

Background Developed in Norway, Sisom is an interactive, rigorously tested, computerized, communication tool designed to help children with cancer express their perceived symptoms/problems. Children travel virtually from island to island rating their symptoms/problems. While Sisom has been found to significantly improve communication in patient consultations in Norway, usability testing is warranted with US children prior to further use in research studies. Objective To determine the usability of Sisom in a sample of English and Spanish speaking children in an urban US community. Methods A mixed methods usability study was conducted with a purposive sample of healthy children and children with cancer. Semi-structured interviews were used to assess healthy children’s symptom recognition. Children with cancer completed 8 usability tasks captured with Morae® 3.3 software. Data were downloaded, transcribed, and analyzed descriptively. Results Four healthy children and 8 children with cancer participated. Of the 44 symptoms assessed, healthy children recognized 15 (34%) pictorial symptoms immediately or indicated 13 (30%) pictures were good representations of the symptom. Six children with cancer completed all tasks. All children navigated successfully from one island to the next, ranking their symptom/problem severity, clicking the magnifying glass for help, or asking the researcher for assistance. All children were satisfied with the aesthetics and expressed an interest in using Sisom to communicate their symptoms. Conclusions A few minor suggestions for improvement and adjustment may optimize the use of Sisom for US children. Implications for Practice Sisom may help clinicians overcome challenges assessing children’s complex symptoms/problems in a child-friendly manner. PMID:24457227

Flight Software Development for the CHEOPS Instrument with the CORDET Framework

NASA Astrophysics Data System (ADS)

Cechticky, V.; Ottensamer, R.; Pasetti, A.

2015-09-01

CHEOPS is an ESA S-class mission dedicated to the precise measurement of radii of already known exoplanets using ultra-high precision photometry. The instrument flight software controlling the instrument and handling the science data is developed by the University of Vienna using the CORDET Framework offered by P&P Software GmbH. The CORDET Framework provides a generic software infrastructure for PUS-based applications. This paper describes how the framework is used for the CHEOPS application software to provide a consistent solution for to the communication and control services, event handling and FDIR procedures. This approach is innovative in four respects: (a) it is a true third-party reuse; (b) re-use is done at specification, validation and code level; (c) the re-usable assets and their qualification data package are entirely open-source; (d) re-use is based on call-back with the application developer providing functions which are called by the reusable architecture. File names missing from here on out (I tried to mimic the files names from before.)

Data to Pictures to Data: Outreach Imaging Software and Metadata

NASA Astrophysics Data System (ADS)

Levay, Z.

2011-07-01

A convergence between astronomy science and digital photography has enabled a steady stream of visually rich imagery from state-of-the-art data. The accessibility of hardware and software has facilitated an explosion of astronomical images for outreach, from space-based observatories, ground-based professional facilities and among the vibrant amateur astrophotography community. Producing imagery from science data involves a combination of custom software to understand FITS data (FITS Liberator), off-the-shelf, industry-standard software to composite multi-wavelength data and edit digital photographs (Adobe Photoshop), and application of photo/image-processing techniques. Some additional effort is needed to close the loop and enable this imagery to be conveniently available for various purposes beyond web and print publication. The metadata paradigms in digital photography are now complying with FITS and science software to carry information such as keyword tags and world coordinates, enabling these images to be usable in more sophisticated, imaginative ways exemplified by Sky in Google Earth and World Wide Telescope.

Playbook Data Analysis Tool: Collecting Interaction Data from Extremely Remote Users

NASA Technical Reports Server (NTRS)

Kanefsky, Bob; Zheng, Jimin; Deliz, Ivonne; Marquez, Jessica J.; Hillenius, Steven

2017-01-01

Typically, user tests for software tools are conducted in person. At NASA, the users may be located at the bottom of the ocean in a pressurized habitat, above the atmosphere in the International Space Station, or in an isolated capsule on a simulated asteroid mission. The Playbook Data Analysis Tool (P-DAT) is a human-computer interaction (HCI) evaluation tool that the NASA Ames HCI Group has developed to record user interactions with Playbook, the group's existing planning-and-execution software application. Once the remotely collected user interaction data makes its way back to Earth, researchers can use P-DAT for in-depth analysis. Since a critical component of the Playbook project is to understand how to develop more intuitive software tools for astronauts to plan in space, P-DAT helps guide us in the development of additional easy-to-use features for Playbook, informing the design of future crew autonomy tools.P-DAT has demonstrated the capability of discreetly capturing usability data in amanner that is transparent to Playbook’s end-users. In our experience, P-DAT data hasalready shown its utility, revealing potential usability patterns, helping diagnose softwarebugs, and identifying metrics and events that are pertinent to Playbook usage aswell as spaceflight operations. As we continue to develop this analysis tool, P-DATmay yet provide a method for long-duration, unobtrusive human performance collectionand evaluation for mission controllers back on Earth and researchers investigatingthe effects and mitigations related to future human spaceflight performance.

Algorithm-Based Motion Magnification for Video Processing in Urological Laparoscopy.

PubMed

Adams, Fabian; Schoelly, Reto; Schlager, Daniel; Schoenthaler, Martin; Schoeb, Dominik S; Wilhelm, Konrad; Hein, Simon; Wetterauer, Ulrich; Miernik, Arkadiusz

2017-06-01

Minimally invasive surgery is in constant further development and has replaced many conventional operative procedures. If vascular structure movement could be detected during these procedures, it could reduce the risk of vascular injury and conversion to open surgery. The recently proposed motion-amplifying algorithm, Eulerian Video Magnification (EVM), has been shown to substantially enhance minimal object changes in digitally recorded video that is barely perceptible to the human eye. We adapted and examined this technology for use in urological laparoscopy. Video sequences of routine urological laparoscopic interventions were recorded and further processed using spatial decomposition and filtering algorithms. The freely available EVM algorithm was investigated for its usability in real-time processing. In addition, a new image processing technology, the CRS iimotion Motion Magnification (CRSMM) algorithm, was specifically adjusted for endoscopic requirements, applied, and validated by our working group. Using EVM, no significant motion enhancement could be detected without severe impairment of the image resolution, motion, and color presentation. The CRSMM algorithm significantly improved image quality in terms of motion enhancement. In particular, the pulsation of vascular structures could be displayed more accurately than in EVM. Motion magnification image processing technology has the potential for clinical importance as a video optimizing modality in endoscopic and laparoscopic surgery. Barely detectable (micro)movements can be visualized using this noninvasive marker-free method. Despite these optimistic results, the technology requires considerable further technical development and clinical tests.

Computerized analysis of plantar pressure variation in flip-flops, athletic shoes, and bare feet.

PubMed

Carl, Tanya J; Barrett, Stephen L

2008-01-01

High peak plantar pressures predispose to foot problems and may exacerbate existing conditions. For podiatric physicians to make educated recommendations to their patients, it is important and necessary to begin to look at different shoes and how they affect peak plantar pressure. To determine how flip-flops change peak plantar pressure while walking, we compared peak plantar pressures in the same test subjects wearing flip-flops, wearing athletic shoes, and in bare feet. Ten women with size 7 feet and a body mass index less than 25 kg/m2 were tested with an in-shoe pressure-measurement system. These data were collected and analyzed by one-way analysis of variance and computer software. Statistically significant results were obtained for nine of the 18 comparisons. In each of these comparisons, flip-flops always demonstrated higher peak plantar pressures than athletic shoes but lower pressures than bare feet. Although these data demonstrate that flip-flops have a minor protective role as a shock absorber during the gait cycle compared with pressures measured while barefoot, compared with athletic shoes, they increase peak plantar pressures, placing the foot at greater risk for pathologic abnormalities.

Evaluation of the free, open source software WordPress as electronic portfolio system in undergraduate medical education.

PubMed

Avila, Javier; Sostmann, Kai; Breckwoldt, Jan; Peters, Harm

2016-06-03

Electronic portfolios (ePortfolios) are used to document and support learning activities. E-portfolios with mobile capabilities allow even more flexibility. However, the development or acquisition of ePortfolio software is often costly, and at the same time, commercially available systems may not sufficiently fit the institution's needs. The aim of this study was to design and evaluate an ePortfolio system with mobile capabilities using a commercially free and open source software solution. We created an online ePortfolio environment using the blogging software WordPress based on reported capability features of such software by a qualitative weight and sum method. Technical implementation and usability were evaluated by 25 medical students during their clinical training by quantitative and qualitative means using online questionnaires and focus groups. The WordPress ePortfolio environment allowed students a broad spectrum of activities - often documented via mobile devices - like collection of multimedia evidences, posting reflections, messaging, web publishing, ePortfolio searches, collaborative learning, knowledge management in a content management system including a wiki and RSS feeds, and the use of aid tools for studying. The students' experience with WordPress revealed a few technical problems, and this report provides workarounds. The WordPress ePortfolio was rated positively by the students as a content management system (67 % of the students), for exchange with other students (74 %), as a note pad for reflections (53 %) and for its potential as an information source for assessment (48 %) and exchange with a mentor (68 %). On the negative side, 74 % of the students in this pilot study did not find it easy to get started with the system, and 63 % rated the ePortfolio as not being user-friendly. Qualitative analysis indicated a need for more introductory information and training. It is possible to build an advanced ePortfolio system with mobile capabilities with the free and open source software WordPress. This allows institutions without proprietary software to build a sophisticated ePortfolio system adapted to their needs with relatively few resources. The implementation of WordPress should be accompanied by introductory courses in the use of the software and its apps in order to facilitate its usability.

Anatomy of an anesthesia information management system.

PubMed

Shah, Nirav J; Tremper, Kevin K; Kheterpal, Sachin

2011-09-01

Anesthesia information management systems (AIMS) have become more prevalent as more sophisticated hardware and software have increased usability and reliability. National mandates and incentives have driven adoption as well. AIMS can be developed in one of several software models (Web based, client/server, or incorporated into a medical device). Irrespective of the development model, the best AIMS have a feature set that allows for comprehensive management of workflow for an anesthesiologist. Key features include preoperative, intraoperative, and postoperative documentation; quality assurance; billing; compliance and operational reporting; patient and operating room tracking; and integration with hospital electronic medical records. Copyright © 2011 Elsevier Inc. All rights reserved.

Increased User Satisfaction Through an Improved Message System

NASA Technical Reports Server (NTRS)

Weissert, C. L.

1997-01-01

With all of the enhancements in software methodology and testing, there is no guarantee that software can be delivered such that no user errors occur, How to handle these errors when they occur has become a major research topic within human-computer interaction (HCI). Users of the Multimission Spacecraft Analysis Subsystem(MSAS) at the Jet Propulsion Laboratory (JPL), a system of X and motif graphical user interfaces for analyzing spacecraft data, complained about the lack of information about the error cause and have suggested that recovery actions be included in the system error messages...The system was evaluated through usability surveys and was shown to be successful.

Design, Implementation, and Wide Pilot Deployment of FitForAll: An Easy to use Exergaming Platform Improving Physical Fitness and Life Quality of Senior Citizens.

PubMed

Konstantinidis, Evdokimos I; Billis, Antonis S; Mouzakidis, Christos A; Zilidou, Vasiliki I; Antoniou, Panagiotis E; Bamidis, Panagiotis D

2016-01-01

Many platforms have emerged as response to the call for technology supporting active and healthy aging. Key requirements for any such e-health systems and any subsequent business exploitation are tailor-made design and proper evaluation. This paper presents the design, implementation, wide deployment, and evaluation of the low cost, physical exercise, and gaming (exergaming) FitForAll (FFA) platform system usability, user adherence to exercise, and efficacy are explored. The design of FFA is tailored to elderly populations, distilling literature guidelines and recommendations. The FFA architecture introduces standard physical exercise protocols in exergaming software engineering, as well as, standard physical assessment tests for augmented adaptability through adjustable exercise intensity. This opens up the way to next generation exergaming software, which may be more automatically/smartly adaptive. 116 elderly users piloted FFA five times/week, during an eight-week controlled intervention. Usability evaluation was formally conducted (SUS, SUMI questionnaires). Control group consisted of a size-matched elderly group following cognitive training. Efficacy was assessed objectively through the senior fitness (Fullerton) test, and subjectively, through WHOQoL-BREF comparisons of pre-postintervention between groups. Adherence to schedule was measured by attendance logs. The global SUMI score was 68.33±5.85%, while SUS was 77.7. Good usability perception is reflected in relatively high adherence of 82% for a daily two months pilot schedule. Compared to control group, elderly using FFA improved significantly strength, flexibility, endurance, and balance while presenting a significant trend in quality of life improvements. This is the first elderly focused exergaming platform intensively evaluated with more than 100 participants. The use of formal tools makes the findings comparable to other studies and forms an elderly exergaming corpus.

The Handover Toolbox: a knowledge exchange and training platform for improving patient care.

PubMed

Drachsler, Hendrik; Kicken, Wendy; van der Klink, Marcel; Stoyanov, Slavi; Boshuizen, Henny P A; Barach, Paul

2012-12-01

Safe and effective patient handovers remain a global organisational and training challenge. Limited evidence supports available handover training programmes. Customisable training is a promising approach to improve the quality and sustainability of handover training and outcomes. We present a Handover Toolbox designed in the context of the European HANDOVER Project. The Toolbox aims to support physicians, nurses, individuals in health professions training, medical educators and handover experts by providing customised handover training tools for different clinical needs and contexts. The Handover Toolbox uses the Technology Enhanced Learning Design Process (TEL-DP), which encompasses user requirements analysis; writing personas; group concept mapping; analysis of suitable software; plus, minus, interesting rating; and usability testing. TEL-DP is aligned with participatory design approaches and ensures development occurs in close collaboration with, and engagement of, key stakeholders. Application of TEL-DP confirmed that the ideal formats of handover training differs for practicing professionals versus individuals in health profession education programmes. Training experts from different countries differed in their views on the optimal content and delivery of training. Analysis of suitable software identified ready-to-use systems that provide required functionalities and can be further customised to users' needs. Interest rating and usability testing resulted in improved usability, navigation and uptake of the Handover Toolbox. The design of the Handover Toolbox was based on a carefully led stakeholder participatory design using the TEL-DP approach. The Toolbox supports a customisable learning approach that allows trainers to design training that addresses the specific information needs of the various target groups. We offer recommendations regarding the application of the Handover Toolbox to medical educators.

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design

PubMed Central

Lowry, Svetlana Z; Patterson, Emily S

2014-01-01

Background There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among “non-typical” HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from “stereotypical” users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. Objective The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Methods Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Results Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Conclusions Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities. PMID:27025349

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design.

PubMed

Gibbons, Michael C; Lowry, Svetlana Z; Patterson, Emily S

2014-12-18

There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among "non-typical" HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from "stereotypical" users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities.

Use of containerisation as an alternative to full virtualisation in grid environments.

NASA Astrophysics Data System (ADS)

Long, Robin

2015-12-01

Virtualisation is a key tool on the grid. It can be used to provide varying work environments or as part of a cloud infrastructure. Virtualisation itself carries certain overheads that decrease the performance of the system through requiring extra resources to virtualise the software and hardware stack, and CPU-cycles wasted instantiating or destroying virtual machines for each job. With the rise and improvements in containerisation, where only the software stack is kept separate and no hardware or kernel virtualisation is used, there is scope for speed improvements and efficiency increases over standard virtualisation. We compare containerisation and virtualisation, including a comparison against bare-metal machines as a benchmark.

Enhancing the Usability of an Optical Reader System to Support Point-of-Care Rapid Diagnostic Testing: An Iterative Design Approach.

PubMed

Hohenstein, Jess; O'Dell, Dakota; Murnane, Elizabeth L; Lu, Zhengda; Erickson, David; Gay, Geri

2017-11-21

In today's health care environment, increasing costs and inadequate medical resources have created a worldwide need for more affordable diagnostic tools that are also portable, fast, and easy to use. To address this issue, numerous research and commercial efforts have focused on developing rapid diagnostic technologies; however, the efficacy of existing systems has been hindered by usability problems or high production costs, making them infeasible for deployment in at-home, point-of-care (POC), or resource-limited settings. The aim of this study was to create a low-cost optical reader system that integrates with any smart device and accepts any type of rapid diagnostic test strip to provide fast and accurate data collection, sample analysis, and diagnostic result reporting. An iterative design methodology was employed by a multidisciplinary research team to engineer three versions of a portable diagnostic testing device that were evaluated for usability and overall user receptivity. Repeated design critiques and usability studies identified a number of system requirements and considerations (eg, software compatibility, biomatter contamination, and physical footprint) that we worked to incrementally incorporate into successive system variants. Our final design phase culminated in the development of Tidbit, a reader that is compatible with any Wi-Fi-enabled device and test strip format. The Tidbit includes various features that support intuitive operation, including a straightforward test strip insertion point, external indicator lights, concealed electronic components, and an asymmetric shape, which inherently signals correct device orientation. Usability testing of the Tidbit indicates high usability for potential user communities. This study presents the design process, specification, and user reception of the Tidbit, an inexpensive, easy-to-use, portable optical reader for fast, accurate quantification of rapid diagnostic test results. Usability testing suggests that the reader is usable among and can benefit a wide group of potential users, including in POC contexts. Generally, the methodology of this study demonstrates the importance of testing these types of systems with potential users and exemplifies how iterative design processes can be employed by multidisciplinary research teams to produce compelling technological solutions. ©Jess Hohenstein, Dakota O'Dell, Elizabeth L Murnane, Zhengda Lu, David Erickson, Geri Gay. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 21.11.2017.

Example of a Human Factors Engineering approach to a medication administration work system: potential impact on patient safety.

PubMed

Beuscart-Zéphir, Marie-Catherine; Pelayo, Sylvia; Bernonville, Stéphanie

2010-04-01

The objectives of this paper are: In this approach, the implementation of such a complex IT solution is considered a major redesign of the work system. The paper describes the Human Factor (HF) tasks embedded in the project lifecycle: (1) analysis and modelling of the current work system and usability assessment of the medication CPOE solution; (2) HF recommendations for work re-design and usability recommendations for IT system re-engineering both aiming at a safer and more efficient work situation. Standard ethnographic methods were used to support the analysis of the current work system and work situations, coupled with cognitive task analysis methods and documents review. Usability inspection (heuristic evaluation) and both in-lab (simulated tasks) and on-site (real tasks) usability tests were performed for the evaluation of the CPOE candidate. Adapted software engineering models were used in combination with usual textual descriptions, tasks models and mock-ups to support the recommendations for work and product re-design. The analysis of the work situations identified different work organisations and procedures across the hospital's departments. The most important differences concerned the doctor-nurse communications and cooperation modes and the procedures for preparing and administering the medications. The assessment of the medication CPOE functions uncovered a number of usability problems including severe ones leading to impossible to detect or to catch errors. Models of the actual and possible distribution of tasks and roles were used to support decision making in the work design process. The results of the usability assessment were translated into requirements to support the necessary re-engineering of the IT application. The HFE approach to medication CPOE efficiently identifies and distinguishes currently unsafe or uncomfortable work situations that could obviously benefit from an IT solution from other work situations incorporating efficient work procedures that might be impaired by the implementation of the CPOE. In this context, a careful redesign of the work situation and of the entire work system is necessary to actually benefit from the installation of the product in terms of patient safety and human performances. In parallel, a usability assessment of the product to be implemented is mandatory to identify potentially dangerous usability flaws and to fix them before the installation. (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Hybrid P300-based brain-computer interface to improve usability for people with severe motor disability: electromyographic signals for error correction during a spelling task.

PubMed

Riccio, Angela; Holz, Elisa Mira; Aricò, Pietro; Leotta, Francesco; Aloise, Fabio; Desideri, Lorenzo; Rimondini, Matteo; Kübler, Andrea; Mattia, Donatella; Cincotti, Febo

2015-03-01

To evaluate the impact of a hybrid control on usability of a P300-based brain-computer interface (BCI) system that was designed to control an assistive technology software and was integrated with an electromyographic channel for error correction. Proof-of-principle study with a convenience sample. Neurologic rehabilitation hospital. Participants (N=11) in this pilot study included healthy (n=8) and severely motor impaired (n=3) persons. The 3 people with severe motor disability were identified as potential candidates to benefit from the proposed hybrid BCI system for communication and environmental interaction. To eventually investigate the improvement in usability, we compared 2 modalities of BCI system control: a P300-based and a hybrid P300 electromyographic-based mode of control. System usability was evaluated according to the following outcome measures within 3 domains: (1) effectiveness (overall system accuracy and P300-based BCI accuracy); (2) efficiency (throughput time and users' workload); and (3) satisfaction (users' satisfaction). We also considered the information transfer rate and time for selection. Findings obtained in healthy participants were in favor of a higher usability of the hybrid control as compared with the nonhybrid. A similar trend was indicated by the observational results gathered from each of the 3 potential end-users. The proposed hybrid BCI control modality could provide end-users with severe motor disability with an option to exploit some residual muscular activity, which could not be fully reliable for properly controlling an assistive technology device. The findings reported in this pilot study encourage the implementation of a clinical trial involving a large cohort of end-users. Copyright © 2015 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Human-centered design of a personal health record system for metabolic syndrome management based on the ISO 9241-210:2010 standard

PubMed Central

Farinango, Charic D; Benavides, Juan S; Cerón, Jesús D; López, Diego M; Álvarez, Rosa E

2018-01-01

Background Previous studies have demonstrated the effectiveness of information and communication technologies to support healthy lifestyle interventions. In particular, personal health record systems (PHR-Ss) empower self-care, essential to support lifestyle changes. Approaches such as the user-centered design (UCD), which is already a standard within the software industry (ISO 9241-210:2010), provide specifications and guidelines to guarantee user acceptance and quality of eHealth systems. However, no single PHR-S for metabolic syndrome (MS) developed following the recommendations of the ISO 9241-210:2010 specification has been found in the literature. Objective The aim of this study was to describe the development of a PHR-S for the management of MS according to the principles and recommendations of the ISO 9241-210 standard. Methods The proposed PHR-S was developed using a formal software development process which, in addition to the traditional activities of any software process, included the principles and recommendations of the ISO 9241-210 standard. To gather user information, a survey sample of 1,187 individuals, eight interviews, and a focus group with seven people were performed. Throughout five iterations, three prototypes were built. Potential users of each system evaluated each prototype. The quality attributes of efficiency, effectiveness, and user satisfaction were assessed using metrics defined in the ISO/IEC 25022 standard. Results The following results were obtained: 1) a technology profile from 1,187 individuals at risk for MS from the city of Popayan, Colombia, identifying that 75.2% of the people use the Internet and 51% had a smartphone; 2) a PHR-S to manage MS developed (the PHR-S has the following five main functionalities: record the five MS risk factors, share these measures with health care professionals, and three educational modules on nutrition, stress management, and a physical activity); and 3) usability tests on each prototype obtaining the following results: 100% effectiveness, 100% efficiency, and 84.2 points in the system usability scale. Conclusion The software development methodology used was based on the ISO 9241-210 standard, which allowed the development team to maintain a focus on user’s needs and requirements throughout the project, which resulted in an increased satisfaction and acceptance of the system. Additionally, the establishment of a multidisciplinary team allowed the application of considerations not only from the disciplines of software engineering and health sciences but also from other disciplines such as graphical design and media communication. Finally, usability testing allowed the observation of flaws in the designs, which helped to improve the solution. PMID:29386903

[Evaluation of Web-based software applications for administrating and organising an ophthalmological clinical trial site].

PubMed

Kortüm, K; Reznicek, L; Leicht, S; Ulbig, M; Wolf, A

2013-07-01

The importance and complexity of clinical trials is continuously increasing, especially in innovative specialties like ophthalmology. Therefore an efficient clinical trial site organisational structure is essential. In modern internet times, this can be accomplished by web-based applications. In total, 3 software applications (Vibe on Prem, Sharepoint and open source software) were evaluated in a clinical trial site in ophthalmology. Assessment criteria were set; they were: reliability, easiness of administration, usability, scheduling, task list, knowledge management, operating costs and worldwide availability. Vibe on Prem customised by the local university met the assessment criteria best. Other applications were not as strong. By introducing a web-based application for administrating and organising an ophthalmological trial site, studies can be conducted in a more efficient and reliable manner. Georg Thieme Verlag KG Stuttgart · New York.

Evaluation of ERTS-1 imagery in mapping and managing soil and range resources in the Sand Hills Region of Nebraska

NASA Technical Reports Server (NTRS)

Seevers, P. M.; Drew, J. V. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Collection of ground truth data provided ground cover percent and the components of ground cover makeup. Percent bare soil appears to have greatest influence on imagery density of sites studied. Forage density estimates can be made on band 5 of MSS, provided site category identification is known. Additional data are provided concerning forage density and vegetation-soil relationship by color composites of MSS imagery. Reflectance differences shown on MSS bands 6 and 7 by Sand Hills lakes are related to water quality and possibly more specifically to total dissolved ions present in the water. Winter imagery with snow cover and low sun angle shows a marked enhancement of topography are associated with differences in forage density. High altitude color infrared photography appears to be a usable tool for recognition, measurement, and evaluation of go-back land.

Elementary software for the hand lens identification of some common iranian woods

Treesearch

Vahidreza Safdari; Margaret S. Devall

2009-01-01

A computer program, “Hyrcania”, has been developed for identifying some common woods (26 hardwoods and 6 softwoods) from the Hyrcanian forest type of Iran. The program has been written in JavaScript and is usable with computers as well as mobile phones. The databases use anatomical characteristics (visible with a hand lens) and wood colour, and can be searched in...

Data Preparation 101: How to Use Query-by-Example to Get Your Research Dataset Ready for Primetime

ERIC Educational Resources Information Center

Lazarony, Paul J.; Driscoll, Donna A.

2011-01-01

Researchers are often distressed to discover that the data they wanted to use in their landmark study is not configured in a way that is usable by a Statistical Analysis Software Package (SASP). For example, the data needed may come from two or more sources and it may not be clear to the researcher how to get them combined into one analyzable…

Netbook - A Toolset in Support of a Collaborative Learning.

DTIC Science & Technology

1997-01-30

As part of its collaborative efforts on the project Netbook - A Toolset in Support of a Collaborative and Cooperative Learning Environment, the...Interactive Multimedia Group (IMG) at Cornell University conducted a usability test of the latest version of Netbook , developed by Odyssey Research...Associates (ORA) in Ithaca, New York. Cornell’s goal was to test the concepts and current functionality of the Netbook software, which is designed to help

New trends in radiology workstation design

NASA Astrophysics Data System (ADS)

Moise, Adrian; Atkins, M. Stella

2002-05-01

In the radiology workstation design, the race for adding more features is now morphing into an iterative user centric design with the focus on ergonomics and usability. The extent of the list of features for the radiology workstation used to be one of the most significant factors for a Picture Archiving and Communication System (PACS) vendor's ability to sell the radiology workstation. Not anymore is now very much the same between the major players in the PACS market. How these features work together distinguishes different radiology workstations. Integration (with the PACS/Radiology Information System (RIS) systems, with the 3D tool, Reporting Tool etc.), usability (user specific preferences, advanced display protocols, smart activation of tools etc.) and efficiency (what is the output a radiologist can generate with the workstation) are now core factors for selecting a workstation. This paper discusses these new trends in radiology workstation design. We demonstrate the importance of the interaction between the PACS vendor (software engineers) and the customer (radiologists) during the radiology workstation design. We focus on iterative aspects of the workstation development, such as the presentation of early prototypes to as many representative users as possible during the software development cycle and present the results of a survey of 8 radiologists on designing a radiology workstation.

Software wizards to adjust keyboard and mouse settings for people with physical impairments

PubMed Central

Koester, Heidi; Simpson, Richard; Mankowski, Jennifer

2013-01-01

Context/objective This study describes research behind two software wizards that help users with physical impairments adjust their keyboard and mouse settings to meet their specific needs. The Keyboard Wizard and Pointing Wizard programs help ensure that keyboard and pointing devices are properly configured for an individual, and reconfigured as the user's needs change. We summarize four effectiveness studies and six usability studies. Methods Studies involved participants whose physical impairments affect their ability to use a keyboard and mouse. Effectiveness studies used an A-B-A design, with condition A using default Windows settings and condition B using wizard-recommended settings. Primary data were performance metrics for text entry and target acquisition. Usability studies asked participants to run through each wizard, with no outside guidance. Primary data were completion time, errors made, and user feedback. Results The wizards were effective at recommending new settings for users who needed them and not recommending them for users who did not. Sensitivity for StickyKeys, pointer speed, and object size algorithms was 100%. Specificity for StickyKeys and pointer speed was over 80%, and 50% for object size. For those who needed settings changes, the recommendations improved performance, with speed increases ranging from 9 to 59%. Accuracy improved significantly with the wizard recommendations, eliminating up to 100% of errors. Users ran through the current wizard software in less than 6 minutes. Ease-of-use rating averaged over 4.5 on a scale of 1 to 5. Conclusion The wizards are a simple yet effective way of adjusting Windows to accommodate physical impairments. PMID:23820146

A software program to measure the three-dimensional length of the spine from radiographic images: Validation and reliability assessment for adolescent idiopathic scoliosis.

PubMed

Berger, Steve; Hasler, Carol-Claudius; Grant, Caroline A; Zheng, Guoyan; Schumann, Steffen; Büchler, Philippe

2017-01-01

The aim of this study was to validate a new program which aims at measuring the three-dimensional length of the spine's midline based on two calibrated orthogonal radiographic images. The traditional uniplanar T1-S1 measurement method is not reflecting the actual three dimensional curvature of a scoliotic spine and is therefore not accurate. The Spinal Measurement Software (SMS) is an alternative to conveniently measure the true spine's length. The validity, inter- and intra-observer variability and usability of the program were evaluated. The usability was quantified based on a subjective questionnaire filled by eight participants using the program for the first time. The validity and variability were assessed by comparing the length of five phantom spines measured based on CT-scan data and on radiographic images with the SMS. The lengths were measured independently by each participant using both techniques. The SMS is easy and intuitive to use, even for non-clinicians. The SMS measured spinal length with an error below 2 millimeters compared to length obtained using CT scan datasets. The inter- and intra-observer variability of the SMS measurements was below 5 millimeters. The SMS provides accurate measurement of the spinal length based on orthogonal radiographic images. The software is easy to use and could easily integrate the clinical workflow and replace current approximations of the spinal length based on a single radiographic image such as the traditional T1-S1 measurement. Crown Copyright © 2016. Published by Elsevier Ireland Ltd. All rights reserved.

QuBiLS-MAS, open source multi-platform software for atom- and bond-based topological (2D) and chiral (2.5D) algebraic molecular descriptors computations.

PubMed

Valdés-Martiní, José R; Marrero-Ponce, Yovani; García-Jacas, César R; Martinez-Mayorga, Karina; Barigye, Stephen J; Vaz d'Almeida, Yasser Silveira; Pham-The, Hai; Pérez-Giménez, Facundo; Morell, Carlos A

2017-06-07

In previous reports, Marrero-Ponce et al. proposed algebraic formalisms for characterizing topological (2D) and chiral (2.5D) molecular features through atom- and bond-based ToMoCoMD-CARDD (acronym for Topological Molecular Computational Design-Computer Aided Rational Drug Design) molecular descriptors. These MDs codify molecular information based on the bilinear, quadratic and linear algebraic forms and the graph-theoretical electronic-density and edge-adjacency matrices in order to consider atom- and bond-based relations, respectively. These MDs have been successfully applied in the screening of chemical compounds of different therapeutic applications ranging from antimalarials, antibacterials, tyrosinase inhibitors and so on. To compute these MDs, a computational program with the same name was initially developed. However, this in house software barely offered the functionalities required in contemporary molecular modeling tasks, in addition to the inherent limitations that made its usability impractical. Therefore, the present manuscript introduces the QuBiLS-MAS (acronym for Quadratic, Bilinear and N-Linear mapS based on graph-theoretic electronic-density Matrices and Atomic weightingS) software designed to compute topological (0-2.5D) molecular descriptors based on bilinear, quadratic and linear algebraic forms for atom- and bond-based relations. The QuBiLS-MAS module was designed as standalone software, in which extensions and generalizations of the former ToMoCoMD-CARDD 2D-algebraic indices are implemented, considering the following aspects: (a) two new matrix normalization approaches based on double-stochastic and mutual probability formalisms; (b) topological constraints (cut-offs) to take into account particular inter-atomic relations; (c) six additional atomic properties to be used as weighting schemes in the calculation of the molecular vectors; (d) four new local-fragments to consider molecular regions of interest; (e) number of lone-pair electrons in chemical structure defined by diagonal coefficients in matrix representations; and (f) several aggregation operators (invariants) applied over atom/bond-level descriptors in order to compute global indices. This software permits the parallel computation of the indices, contains a batch processing module and data curation functionalities. This program was developed in Java v1.7 using the Chemistry Development Kit library (version 1.4.19). The QuBiLS-MAS software consists of two components: a desktop interface (GUI) and an API library allowing for the easy integration of the latter in chemoinformatics applications. The relevance of the novel extensions and generalizations implemented in this software is demonstrated through three studies. Firstly, a comparative Shannon's entropy based variability study for the proposed QuBiLS-MAS and the DRAGON indices demonstrates superior performance for the former. A principal component analysis reveals that the QuBiLS-MAS approach captures chemical information orthogonal to that codified by the DRAGON descriptors. Lastly, a QSAR study for the binding affinity to the corticosteroid-binding globulin using Cramer's steroid dataset is carried out. From these analyses, it is revealed that the QuBiLS-MAS approach for atom-pair relations yields similar-to-superior performance with regard to other QSAR methodologies reported in the literature. Therefore, the QuBiLS-MAS approach constitutes a useful tool for the diversity analysis of chemical compound datasets and high-throughput screening of structure-activity data.

Usability Testing of a Complex Clinical Decision Support Tool in the Emergency Department: Lessons Learned.

PubMed

Press, Anne; McCullagh, Lauren; Khan, Sundas; Schachter, Andy; Pardo, Salvatore; McGinn, Thomas

2015-09-10

As the electronic health record (EHR) becomes the preferred documentation tool across medical practices, health care organizations are pushing for clinical decision support systems (CDSS) to help bring clinical decision support (CDS) tools to the forefront of patient-physician interactions. A CDSS is integrated into the EHR and allows physicians to easily utilize CDS tools. However, often CDSS are integrated into the EHR without an initial phase of usability testing, resulting in poor adoption rates. Usability testing is important because it evaluates a CDSS by testing it on actual users. This paper outlines the usability phase of a study, which will test the impact of integration of the Wells CDSS for pulmonary embolism (PE) diagnosis into a large urban emergency department, where workflow is often chaotic and high stakes decisions are frequently made. We hypothesize that conducting usability testing prior to integration of the Wells score into an emergency room EHR will result in increased adoption rates by physicians. The objective of the study was to conduct usability testing for the integration of the Wells clinical prediction rule into a tertiary care center's emergency department EHR. We conducted usability testing of a CDS tool in the emergency department EHR. The CDS tool consisted of the Wells rule for PE in the form of a calculator and was triggered off computed tomography (CT) orders or patients' chief complaint. The study was conducted at a tertiary hospital in Queens, New York. There were seven residents that were recruited and participated in two phases of usability testing. The usability testing employed a "think aloud" method and "near-live" clinical simulation, where care providers interacted with standardized patients enacting a clinical scenario. Both phases were audiotaped, video-taped, and had screen-capture software activated for onscreen recordings. Phase I: Data from the "think-aloud" phase of the study showed an overall positive outlook on the Wells tool in assessing a patient for a PE diagnosis. Subjects described the tool as "well-organized" and "better than clinical judgment". Changes were made to improve tool placement into the EHR to make it optimal for decision-making, auto-populating boxes, and minimizing click fatigue. Phase II: After incorporating the changes noted in Phase 1, the participants noted tool improvements. There was less toggling between screens, they had all the clinical information required to complete the tool, and were able to complete the patient visit efficiently. However, an optimal location for triggering the tool remained controversial. This study successfully combined "think-aloud" protocol analysis with "near-live" clinical simulations in a usability evaluation of a CDS tool that will be implemented into the emergency room environment. Both methods proved useful in the assessment of the CDS tool and allowed us to refine tool usability and workflow.

Computational challenges and human factors influencing the design and use of clinical research participant eligibility pre-screening tools

PubMed Central

2012-01-01

Background Clinical trials are the primary mechanism for advancing clinical care and evidenced-based practice, yet challenges with the recruitment of participants for such trials are widely recognized as a major barrier to these types of studies. Data warehouses (DW) store large amounts of heterogenous clinical data that can be used to enhance recruitment practices, but multiple challenges exist when using a data warehouse for such activities, due to the manner of collection, management, integration, analysis, and dissemination of the data. A critical step in leveraging the DW for recruitment purposes is being able to match trial eligibility criteria to discrete and semi-structured data types in the data warehouse, though trial eligibility criteria tend to be written without concern for their computability. We present the multi-modal evaluation of a web-based tool that can be used for pre-screening patients for clinical trial eligibility and assess the ability of this tool to be practically used for clinical research pre-screening and recruitment. Methods The study used a validation study, usability testing, and a heuristic evaluation to evaluate and characterize the operational characteristics of the software as well as human factors affecting its use. Results Clinical trials from the Division of Cardiology and the Department of Family Medicine were used for this multi-modal evaluation, which included a validation study, usability study, and a heuristic evaluation. From the results of the validation study, the software demonstrated a positive predictive value (PPV) of 54.12% and 0.7%, respectively, and a negative predictive value (NPV) of 73.3% and 87.5%, respectively, for two types of clinical trials. Heuristic principles concerning error prevention and documentation were characterized as the major usability issues during the heuristic evaluation. Conclusions This software is intended to provide an initial list of eligible patients to a clinical study coordinators, which provides a starting point for further eligibility screening by the coordinator. Because this software has a high “rule in” ability, meaning that it is able to remove patients who are not eligible for the study, the use of an automated tool built to leverage an existing enterprise DW can be beneficial to determining eligibility and facilitating clinical trial recruitment through pre-screening. While the results of this study are promising, further refinement and study of this and related approaches to automated eligibility screening, including comparison to other approaches and stakeholder perceptions, are needed and future studies are planned to address these needs. PMID:22646313

Computational challenges and human factors influencing the design and use of clinical research participant eligibility pre-screening tools.

PubMed

Pressler, Taylor R; Yen, Po-Yin; Ding, Jing; Liu, Jianhua; Embi, Peter J; Payne, Philip R O

2012-05-30

Clinical trials are the primary mechanism for advancing clinical care and evidenced-based practice, yet challenges with the recruitment of participants for such trials are widely recognized as a major barrier to these types of studies. Data warehouses (DW) store large amounts of heterogenous clinical data that can be used to enhance recruitment practices, but multiple challenges exist when using a data warehouse for such activities, due to the manner of collection, management, integration, analysis, and dissemination of the data. A critical step in leveraging the DW for recruitment purposes is being able to match trial eligibility criteria to discrete and semi-structured data types in the data warehouse, though trial eligibility criteria tend to be written without concern for their computability. We present the multi-modal evaluation of a web-based tool that can be used for pre-screening patients for clinical trial eligibility and assess the ability of this tool to be practically used for clinical research pre-screening and recruitment. The study used a validation study, usability testing, and a heuristic evaluation to evaluate and characterize the operational characteristics of the software as well as human factors affecting its use. Clinical trials from the Division of Cardiology and the Department of Family Medicine were used for this multi-modal evaluation, which included a validation study, usability study, and a heuristic evaluation. From the results of the validation study, the software demonstrated a positive predictive value (PPV) of 54.12% and 0.7%, respectively, and a negative predictive value (NPV) of 73.3% and 87.5%, respectively, for two types of clinical trials. Heuristic principles concerning error prevention and documentation were characterized as the major usability issues during the heuristic evaluation. This software is intended to provide an initial list of eligible patients to a clinical study coordinators, which provides a starting point for further eligibility screening by the coordinator. Because this software has a high "rule in" ability, meaning that it is able to remove patients who are not eligible for the study, the use of an automated tool built to leverage an existing enterprise DW can be beneficial to determining eligibility and facilitating clinical trial recruitment through pre-screening. While the results of this study are promising, further refinement and study of this and related approaches to automated eligibility screening, including comparison to other approaches and stakeholder perceptions, are needed and future studies are planned to address these needs.

Three Software Tools for Viewing Sectional Planes, Volume Models, and Surface Models of a Cadaver Hand.

PubMed

Chung, Beom Sun; Chung, Min Suk; Shin, Byeong Seok; Kwon, Koojoo

2018-02-19

The hand anatomy, including the complicated hand muscles, can be grasped by using computer-assisted learning tools with high quality two-dimensional images and three-dimensional models. The purpose of this study was to present up-to-date software tools that promote learning of stereoscopic morphology of the hand. On the basis of horizontal sectioned images and outlined images of a male cadaver, vertical planes, volume models, and surface models were elaborated. Software to browse pairs of the sectioned and outlined images in orthogonal planes and software to peel and rotate the volume models, as well as a portable document format (PDF) file to select and rotate the surface models, were produced. All of the software tools were downloadable free of charge and usable off-line. The three types of tools for viewing multiple aspects of the hand could be adequately employed according to individual needs. These new tools involving the realistic images of a cadaver and the diverse functions are expected to improve comprehensive knowledge of the hand shape. © 2018 The Korean Academy of Medical Sciences.

Three Software Tools for Viewing Sectional Planes, Volume Models, and Surface Models of a Cadaver Hand

PubMed Central

2018-01-01

Background The hand anatomy, including the complicated hand muscles, can be grasped by using computer-assisted learning tools with high quality two-dimensional images and three-dimensional models. The purpose of this study was to present up-to-date software tools that promote learning of stereoscopic morphology of the hand. Methods On the basis of horizontal sectioned images and outlined images of a male cadaver, vertical planes, volume models, and surface models were elaborated. Software to browse pairs of the sectioned and outlined images in orthogonal planes and software to peel and rotate the volume models, as well as a portable document format (PDF) file to select and rotate the surface models, were produced. Results All of the software tools were downloadable free of charge and usable off-line. The three types of tools for viewing multiple aspects of the hand could be adequately employed according to individual needs. Conclusion These new tools involving the realistic images of a cadaver and the diverse functions are expected to improve comprehensive knowledge of the hand shape. PMID:29441756

Concurrent extensions to the FORTRAN language for parallel programming of computational fluid dynamics algorithms

NASA Technical Reports Server (NTRS)

Weeks, Cindy Lou

1986-01-01

Experiments were conducted at NASA Ames Research Center to define multi-tasking software requirements for multiple-instruction, multiple-data stream (MIMD) computer architectures. The focus was on specifying solutions for algorithms in the field of computational fluid dynamics (CFD). The program objectives were to allow researchers to produce usable parallel application software as soon as possible after acquiring MIMD computer equipment, to provide researchers with an easy-to-learn and easy-to-use parallel software language which could be implemented on several different MIMD machines, and to enable researchers to list preferred design specifications for future MIMD computer architectures. Analysis of CFD algorithms indicated that extensions of an existing programming language, adaptable to new computer architectures, provided the best solution to meeting program objectives. The CoFORTRAN Language was written in response to these objectives and to provide researchers a means to experiment with parallel software solutions to CFD algorithms on machines with parallel architectures.

Design and implementation of a software package to control a network of robotic observatories

NASA Astrophysics Data System (ADS)

Tuparev, G.; Nicolova, I.; Zlatanov, B.; Mihova, D.; Popova, I.; Hessman, F. V.

2006-09-01

We present a description of a reusable software package able to control a large, heterogeneous network of fully and semi-robotic observatories initially developed to run the MONET network of two 1.2 m telescopes. Special attention is given to the design of a robust, long-term observation scheduler which also allows the trading of observation time and facilities within various networks. The handling of the ``Phase I&II" project-development process, the time-accounting between complex organizational structures, and usability issues for making the package accessible not only to professional astronomers, but also to amateurs and high-school students is discussed. A simple RTML-based solution to link multiple networks is demonstrated.

Integration of an expert teaching assistant with distance learning software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fonseca, S.P.; Reed, N.E.

1996-12-31

The Remote Teaching Assistant (RTA) software currently under development at UC Davis allows students and Teaching Assistants (TA`s) to interact through multimedia communication via the Internet. To resolve the problem of TA unavailability and limited knowledge, an Expert Teaching Assistant (ETA) module is being developed. When TA`s are not on-line, students in need of help consult ETA. The focus of this research is the development and integration of ETA with RTA, the establishment of an architecture suitable for use with education (the domain) in any sub-domain (course), and the creation of a mechanism usable by non-technical personnel to maintain knowledgemore » bases.« less

Software Development Processes Applied to Computational Icing Simulation

NASA Technical Reports Server (NTRS)

Levinson, Laurie H.; Potapezuk, Mark G.; Mellor, Pamela A.

1999-01-01

The development of computational icing simulation methods is making the transition form the research to common place use in design and certification efforts. As such, standards of code management, design validation, and documentation must be adjusted to accommodate the increased expectations of the user community with respect to accuracy, reliability, capability, and usability. This paper discusses these concepts with regard to current and future icing simulation code development efforts as implemented by the Icing Branch of the NASA Lewis Research Center in collaboration with the NASA Lewis Engineering Design and Analysis Division. With the application of the techniques outlined in this paper, the LEWICE ice accretion code has become a more stable and reliable software product.

Desktop publishing and medical imaging: paper as hardcopy medium for digital images.

PubMed

Denslow, S

1994-08-01

Desktop-publishing software and hardware has progressed to the point that many widely used word-processing programs are capable of printing high-quality digital images with many shades of gray from black to white. Accordingly, it should be relatively easy to print digital medical images on paper for reports, instructional materials, and in research notes. Components were assembled that were necessary for extracting image data from medical imaging devices and converting the data to a form usable by word-processing software. A system incorporating these components was implemented in a medical setting and has been operating for 18 months. The use of this system by medical staff has been monitored.

Prima Platform: A Scheme for Managing Equipment-Dependent Onboard Functions and Impacts on the Avionics Software Production Process

NASA Astrophysics Data System (ADS)

Candia, Sante; Lisio, Giovanni; Campolo, Giovanni; Pascucci, Dario

2010-08-01

The Avionics Software (ASW), in charge of controlling the Low Earth Orbit (LEO) Spacecraft PRIMA Platform (Piattaforma Ri-configurabile Italiana Multi-Applicativa), is evolving towards a highly modular and re-usable architecture based on an architectural framework allowing the effective integration of the software building blocks (SWBBs) providing the on-board control functions. During the recent years, the PRIMA ASW design and production processes have been improved to reach the following objectives: (a) at PUS Services level, separation of the mission-independent software mechanisms from the mission-dependent configuration information; (b) at Application level, identification of mission-independent recurrent functions for promoting abstraction and obtaining a more efficient and safe ASW production, with positive implications also on the software validation activities. This paper is dedicated to the characterisation activity which has been performed at Application level for a software component abstracting a set of functions for the generic On-Board Assembly (OBA), a set of hardware units used to deliver an on-board service. Moreover, the ASW production process is specified to show how it results after the introduction of the new design features.

Application Reuse Library for Software, Requirements, and Guidelines

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Thronesbery, Carroll

1994-01-01

Better designs are needed for expert systems and other operations automation software, for more reliable, usable and effective human support. A prototype computer-aided Application Reuse Library shows feasibility of supporting concurrent development and improvement of advanced software by users, analysts, software developers, and human-computer interaction experts. Such a library expedites development of quality software, by providing working, documented examples, which support understanding, modification and reuse of requirements as well as code. It explicitly documents and implicitly embodies design guidelines, standards and conventions. The Application Reuse Library provides application modules with Demo-and-Tester elements. Developers and users can evaluate applicability of a library module and test modifications, by running it interactively. Sub-modules provide application code and displays and controls. The library supports software modification and reuse, by providing alternative versions of application and display functionality. Information about human support and display requirements is provided, so that modifications will conform to guidelines. The library supports entry of new application modules from developers throughout an organization. Example library modules include a timer, some buttons and special fonts, and a real-time data interface program. The library prototype is implemented in the object-oriented G2 environment for developing real-time expert systems.

Advanced Resistive Exercise Device (ARED) Flight Software (FSW): A Unique Approach to Exercise in Long Duration Habitats

NASA Technical Reports Server (NTRS)

Mangieri, Mark

2005-01-01

ARED flight instrumentation software is associated with an overall custom designed resistive exercise system that will be deployed on the International Space Station (ISS). This innovative software application fuses together many diverse and new technologies into a robust and usable package. The software takes advantage of touchscreen user interface technology by providing a graphical user interface on a Windows based tablet PC, meeting a design constraint of keyboard-less interaction with flight crewmembers. The software interacts with modified commercial data acquisition (DAQ) hardware to acquire multiple channels of sensor measurment from the ARED device. This information is recorded on the tablet PC and made available, via International Space Station (ISS) Wireless LAN (WLAN) and telemetry subsystems, to ground based mission medics and trainers for analysis. The software includes a feature to accept electronically encoded prescriptions of exercises that guide crewmembers through a customized regimen of resistive weight training, based on personal analysis. These electronically encoded prescriptions are provided to the crew via ISS WLAN and telemetry subsystems. All personal data is securely associated with an individual crew member, based on a PIN ID mechanism.

Software Quality Assurance Metrics

NASA Technical Reports Server (NTRS)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

The Production Data Approach for Full Lifecycle Management

NASA Astrophysics Data System (ADS)

Schopf, J.

2012-04-01

The amount of data generated by scientists is growing exponentially, and studies have shown [Koe04] that un-archived data sets have a resource half-life that is only a fraction of those resources that are electronically archived. Most groups still lack standard approaches and procedures for data management. Arguably, however, scientists know something about building software. A recent article in Nature [Mer10] stated that 45% of research scientists spend more time now developing software than they did 5 years ago, and 38% spent at least 1/5th of their time developing software. Fox argues [Fox10] that a simple release of data is not the correct approach to data curation. In addition, just as software is used in a wide variety of ways never initially envisioned by its developers, we're seeing this even to a greater extent with data sets. In order to address the need for better data preservation and access, we propose that data sets should be managed in a similar fashion to building production quality software. These production data sets are not simply published once, but go through a cyclical process, including phases such as design, development, verification, deployment, support, analysis, and then development again, thereby supporting the full lifecycle of a data set. The process involved in academically-produced software changes over time with respect to issues such as how much it is used outside the development group, but factors in aspects such as knowing who is using the code, enabling multiple developers to contribute to code development with common procedures, formal testing and release processes, developing documentation, and licensing. When we work with data, either as a collection source, as someone tagging data, or someone re-using it, many of the lessons learned in building production software are applicable. Table 1 shows a comparison of production software elements to production data elements. Table 1: Comparison of production software and production data. Production Software Production Data End-user considerations End-user considerations Multiple Coders: Repository with check-in procedures Coding standards Multiple producers/collectors Local archive with check-in procedure Metadata Standards Formal testing Formal testing Bug tracking and fixes Bug tracking and fixes, QA/QC Documentation Documentation Formal Release Process Formal release process to external archive License Citation/usage statement The full presentation of this abstract will include a detailed discussion of these issues so that researchers can produce usable and accessible data sets as a first step toward reproducible science. By creating production-quality data sets, we extend the potential of our data, both in terms of usability and usefulness to ourselves and other researchers. The more we treat data with formal processes and release cycles, the more relevant and useful it can be to the scientific community.

Evaluation of patient satisfaction with tailored online patient education information.

PubMed

Atack, Lynda; Luke, Robert; Chien, Elise

2008-01-01

Patients are using the Internet for access to standardized health information in ever-growing numbers. Although increased access to health information can be helpful, the quality of information varies widely. All too often, the information retrieved is incomplete, inaccurate, or inappropriate. An interdisciplinary team of clinicians, librarians, software engineers, and multimedia designers developed an online patient education system that enables clinicians to "prescribe" tailored, evidence-based health information. The system provides access to text and video that patients can adapt for language, vision, and hearing preferences. Usability testing was conducted with eight patients in a usability laboratory using the "think-aloud" method, surveys, and interviews. Results indicated that patients were highly satisfied and that the site has the potential to become a valuable resource in disease management. Patients made several recommendations regarding system appearance, function, and content that will have application for other groups developing online patient education systems.

Multimedia telehomecare system using standard TV set.

PubMed

Guillén, S; Arredondo, M T; Traver, V; García, J M; Fernández, C

2002-12-01

Nowadays, there are a very large number of patients that need specific health support at home. The deployment of broadband communication networks is making feasible the provision of home care services with a proper quality of service. This paper presents a telehomecare multimedia platform that runs over integrated services digital network and internet protocol using videoconferencing standards H.320 and H.323, and standard TV set for patient interaction. This platform allows online remote monitoring: ECG, heart sound, blood pressure. Usability, affordability, and interoperability were considered for the design and development of its hardware and software components. A first evaluation of technical and usability aspects were carried forward with 52 patients of a private clinic and 10 students in the University. Results show a high rate (mean = 4.33, standard deviation--SD = 1.63 in a five-points Likert scale) in the global perception of users on the quality of images, voice, and feeling of virtual presence.

Usable Interface Design for Everyone

NASA Astrophysics Data System (ADS)

de Castro Lozano, Carlos; Salcines, Enrique García; Sainz de Abajo, Beatriz; Burón Fernández, F. Javier; Ramírez, José Miguel; Recellado, José Gabriel Zato; Montoya, Rafael Sanchez; Bell, John; Marin, Francisco Alcantud

When designing "interfaces for everyone" for interactive systems, it is important to consider factors such as cost, the intended market, the state of the environment, etc. User interfaces are fundamental for the developmental process in any application, and its design must be contemplated from the start. Of the distinct parts of a system (hardware and software), it is the interface that permits the user access to computer resources. The seven principles of "Universal Design" or "Design for Everyone" focus on a universal usable design, but at the same time acknowledge the influences of internal and external factors. Structural changes in social and health services could provide an increase in the well-being of a country's citizens through the use of self-care programming and proactive management/prevention of disease. Automated home platforms can act as an accessibility instrument which permits users to avoid, compensate, mitigate, or neutralize the deficiencies and dependencies caused by living alone.

Human-Centered Development of an Online Social Network for Metabolic Syndrome Management.

PubMed

Núñez-Nava, Jefersson; Orozco-Sánchez, Paola A; López, Diego M; Ceron, Jesus D; Alvarez-Rosero, Rosa E

2016-01-01

According to the International Diabetes Federation (IDF), a quarter of the world's population has Metabolic Syndrome (MS). To develop (and assess the users' degree of satisfaction of) an online social network for patients who suffer from Metabolic Syndrome, based on the recommendations and requirements of the Human-Centered Design. Following the recommendations of the ISO 9241-210 for Human-Centered Design (HCD), an online social network was designed to promote physical activity and healthy nutrition. In order to guarantee the active participation of the users during the development of the social network, a survey, an in-depth interview, a focal group, and usability tests were carried out with people suffering from MS. The study demonstrated how the different activities, recommendations, and requirements of the ISO 9241-210 are integrated into a traditional software development process. Early usability tests demonstrated that the user's acceptance and the effectiveness and efficiency of the social network are satisfactory.

UniGene Tabulator: a full parser for the UniGene format.

PubMed

Lenzi, Luca; Frabetti, Flavia; Facchin, Federica; Casadei, Raffaella; Vitale, Lorenza; Canaider, Silvia; Carinci, Paolo; Zannotti, Maria; Strippoli, Pierluigi

2006-10-15

UniGene Tabulator 1.0 provides a solution for full parsing of UniGene flat file format; it implements a structured graphical representation of each data field present in UniGene following import into a common database managing system usable in a personal computer. This database includes related tables for sequence, protein similarity, sequence-tagged site (STS) and transcript map interval (TXMAP) data, plus a summary table where each record represents a UniGene cluster. UniGene Tabulator enables full local management of UniGene data, allowing parsing, querying, indexing, retrieving, exporting and analysis of UniGene data in a relational database form, usable on Macintosh (OS X 10.3.9 or later) and Windows (2000, with service pack 4, XP, with service pack 2 or later) operating systems-based computers. The current release, including both the FileMaker runtime applications, is freely available at http://apollo11.isto.unibo.it/software/

Practical Issues in Having a Usable Library of Software Specifications.

DTIC Science & Technology

1981-03-01

Specifications* DEC 1 5 1981 Ralph M. Weischedel H Department of Computer & Information Sciences University of Delaware Newark, DE 19711 *Research sponsored by...AREA 6 WORK UNIT NUMBERS University of Delaware I Newark, DE 19711 61102F 2304/A2 11. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Air Force...Irom Controlling Office) 15. SECURITY CLASS. (of this report) UNCLASSIFIED ISa. DECLASSIFICATION/DOWNGRADING SCHEDu LE 16. DISTRIBUTION STATEMENT (of

Development of a Mammographic Image Processing Environment Using MATLAB.

DTIC Science & Technology

1994-12-01

S. .° : i. .... ...... Correctness Reliability Efficiency Integrity Usability Figure 1.2 - McCall’s software quality factors [ Pressman , 1987] 1.4...quality factors [ Pressman , 1987] 3-13 Each quality factor itself is related to independent attributes called criteria [Cooper and Fisher, 1979], or...metrics by [ Pressman , 1987], that can be used to judge, define, and measure quality [Cooper and Fisher, 1979]. Figure 3.9 shows the criteria that are used

The anatomy of E-Learning tools: Does software usability influence learning outcomes?

PubMed

Van Nuland, Sonya E; Rogers, Kem A

2016-07-08

Reductions in laboratory hours have increased the popularity of commercial anatomy e-learning tools. It is critical to understand how the functionality of such tools can influence the mental effort required during the learning process, also known as cognitive load. Using dual-task methodology, two anatomical e-learning tools were examined to determine the effect of their design on cognitive load during two joint learning exercises. A.D.A.M. Interactive Anatomy is a simplistic, two-dimensional tool that presents like a textbook, whereas Netter's 3D Interactive Anatomy has a more complex three-dimensional usability that allows structures to be rotated. It was hypothesized that longer reaction times on an observation task would be associated with the more complex anatomical software (Netter's 3D Interactive Anatomy), indicating a higher cognitive load imposed by the anatomy software, which would result in lower post-test scores. Undergraduate anatomy students from Western University, Canada (n = 70) were assessed using a baseline knowledge test, Stroop observation task response times (a measure of cognitive load), mental rotation test scores, and an anatomy post-test. Results showed that reaction times and post-test outcomes were similar for both tools, whereas mental rotation test scores were positively correlated with post-test values when students used Netter's 3D Interactive Anatomy (P = 0.007), but not when they used A.D.A.M. Interactive Anatomy. This suggests that a simple e-learning tool, such as A.D.A.M. Interactive Anatomy, is as effective as more complicated tools, such as Netter's 3D Interactive Anatomy, and does not academically disadvantage those with poor spatial ability. Anat Sci Educ 9: 378-390. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Evaluation Results of an Ontology-based Design Model of Virtual Environments for Upper Limb Motor Rehabilitation of Stroke Patients.

PubMed

Ramírez-Fernández, Cristina; Morán, Alberto L; García-Canseco, Eloísa; Gómez-Montalvo, Jorge R

2017-03-23

1) To enhance the content of an ontology for designing virtual environments (VEs) for upper limb motor rehabilitation of stroke patients according to the suggestions and comments of rehabilitation specialists and software developers, 2) to characterize the perceived importance level of the ontology, 3) to determine the perceived usefulness of the ontology, and 4) to identify the safety characteristics of the ontology for VEs design according to the rehabilitation specialists. Using two semi-structured Web questionnaires, we asked six rehabilitation specialists and six software developers to provide us with their perception regarding the level of importance and the usability of the ontology. From their responses we have identified themes related to perceived and required safety characteristics of the ontology. Significant differences in the importance level were obtained for the Stroke Disability, VE Configuration, Outcome Measures, and Safety Calibration classes, which were perceived as highly important by rehabilitation specialists. Regarding usability, the ontology was perceived by both groups with high usefulness, ease of use, learnability and intention of use. Concerning the thematic analysis of recommendations, eight topics for safety characteristics of the ontology were identified: adjustment of therapy strategies; selection and delimitation of movements; selection and proper calibration of the interaction device; proper selection of measuring instruments; gradual modification of the difficulty of the exercise; adaptability and variability of therapy exercises; feedback according to the capabilities of the patient; and real-time support for exercise training. The rehabilitation specialists and software developers confirmed the importance of the information contained in the ontology regarding motor rehabilitation of the upper limb. Their recommendations highlight the safety features and the advantages of the ontology as a guide for the effective design of VEs.

Enhancements to the KATE model-based reasoning system

NASA Technical Reports Server (NTRS)

Thomas, Stan J.

1994-01-01

KATE (Knowledge-based Autonomous Test Engineer) is a model-based software system developed in the Artificial Intelligence Laboratory at the Kennedy Space Center for monitoring, fault detection, and control of launch vehicles and ground support systems. This report describes two software efforts which enhance the functionality and usability of KATE. The first addition, a flow solver, adds to KATE a tool for modeling the flow of liquid in a pipe system. The second addition adds support for editing KATE knowledge base files to the Emacs editor. The body of this report discusses design and implementation issues having to do with these two tools. It will be useful to anyone maintaining or extending either the flow solver or the editor enhancements.

Independent Verification and Validation of Complex User Interfaces: A Human Factors Approach

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Berman, Andrea; Chmielewski, Cynthia

1996-01-01

The Usability Testing and Analysis Facility (UTAF) at the NASA Johnson Space Center has identified and evaluated a potential automated software interface inspection tool capable of assessing the degree to which space-related critical and high-risk software system user interfaces meet objective human factors standards across each NASA program and project. Testing consisted of two distinct phases. Phase 1 compared analysis times and similarity of results for the automated tool and for human-computer interface (HCI) experts. In Phase 2, HCI experts critiqued the prototype tool's user interface. Based on this evaluation, it appears that a more fully developed version of the tool will be a promising complement to a human factors-oriented independent verification and validation (IV&V) process.

A State-of-the-Art Systematic Content Analysis of Games for Health.

PubMed

Lu, Amy Shirong; Kharrazi, Hadi

2018-02-01

As the field of games for health continues to gain momentum, it is crucial to document the field's scale of growth, identify design patterns, and to address potential design issues for future health game development. Few studies have explored the attributes and usability features of games for health as a whole over time. We offer the first comprehensive systematic content analysis of digital games for health by examining 1743 health games released between 1983 and 2016 in 23 countries extracted from nine international English health game databases and directories. The majority of these games were developed in the United States (67.18%) and France (18.59%). The most popular platforms included web browsers (72.38%) and Windows (14.41%). Approximately four out of five (79.12%) of the games were available at no cost. We coded 1553 accessible games for an in-depth analysis and further assessed 1303 for usability. Popular health topics represented included: cognitive training (37.41%), indirect health education (13.33%), and medical care provision (9.98%). Most games (75.66%) could be completed within 60 minutes. The main game usability problems identified included a lack of customization, nonskippable contents, and a lack of feedback and instruction to the players. While most of the usability problems have improved as did the software and hardware technology, the players' ability to skip nonplayable contents has become slightly more restricted overtime. Comparison with game efficacy publications suggested that a further understanding of the scope for games for health is needed on a global level.

RapidSplint: virtual splint generation for orthognathic surgery - results of a pilot series.

PubMed

Adolphs, Nicolai; Liu, Weichen; Keeve, Erwin; Hoffmeister, Bodo

2014-01-01

Within the domain of craniomaxillofacial surgery, orthognathic surgery is a special field dedicated to the correction of dentofacial anomalies resulting from skeletal malocclusion. Generally, in such cases, an interdisciplinary orthodontic and surgical treatment approach is required. After initial orthodontic alignment of the dental arches, skeletal discrepancies of the jaws can be corrected by distinct surgical strategies and procedures in order to achieve correct occlusal relations, as well as facial balance and harmony within individualized treatment concepts. To transfer the preoperative surgical planning and reposition the mobilized dental arches with optimal occlusal relations, surgical splints are typically used. For this purpose, different strategies have been described which use one or more splints. Traditionally, these splints are manufactured by a dental technician based on patient-specific dental casts; however, computer-assisted technologies have gained increasing importance with respect to preoperative planning and its subsequent surgical transfer. In a pilot study of 10 patients undergoing orthognathic corrections by a one-splint strategy, two final occlusal splints were produced for each patient and compared with respect to their clinical usability. One splint was manufactured in the traditional way by a dental technician according to the preoperative surgical planning. After performing a CBCT scan of the patient's dental casts, a second splint was designed virtually by an engineer and surgeon working together, according to the desired final occlusion. For this purpose, RapidSplint, a custom-made software platform, was used. After post-processing and conversion of the datasets into .stl files, the splints were fabricated by the PolyJet procedure using photo polymerization. During surgery, both splints were inserted after mobilization of the dental arches then compared with respect to their clinical usability according to the occlusal fitting. Using the workflow described above, virtual splints could be designed and manufactured for all patients in this pilot study. Eight of 10 virtual splints could be used clinically to achieve and maintain final occlusion after orthognathic surgery. In two cases virtual splints were not usable due to insufficient occlusal fitting, and even two of the traditional splints were not clinically usable. In five patients where both types of splints were available, their occlusal fitting was assessed as being equivalent, and in one case the virtual splint showed even better occlusal fitting than the traditional splint. In one case where no traditional splint was available, the virtual splint proved to be helpful in achieving the final occlusion. In this pilot study it was demonstrated that clinically usable splints for orthognathic surgery can be produced by computer-assisted technology. Virtual splint design was realized by RapidSplint®, an in-house software platform which might contribute in future to shorten preoperative workflows for the production of orthognathic surgical splints.

Usability evaluation of in-housed developed ERP system

NASA Astrophysics Data System (ADS)

Faisal, Chaudhry Muhammad Nadeem; Shakeel Faridi, Muhammad; Javed, Zahid

2011-10-01

Enterprise Resource Planning systems are the combination of different business IS (Information System) applications that are designed according to the organization requirements. Generally ERP systems are suffering from complex user interface issues. Recent research shows that there is a need for improvement concerning, the user interface from their perspectives. In order to design the software applications that are easy to use, memorize and apply to new problems, we must know the users philosophy and something about learning, reminiscence and problems solving. The Usability engineering is the only way to study the deeds of users while interacting with ERP (Enterprise Resource & Planning). This paper will focus on the users' experiences view of financial module in ERP system. The HCI research method, explicitly survey questionnaire method was adopted to gather users understanding in order to evaluate the selected modules for in-housed ERP system. The study involved group of users from two industries, the results can not be generalized as a whole. The study was first time successfully applied Usability evaluation on in-housed ERP in local industry (Masood Textile Mills, Interloop Ltd) in Pakistan. The results may hopefully opened-up an area of research and methodology that could provide considerable further benefits to Industry in developments of Industrial information systems.

Qualitative Assessment of the Feasibility, Usability, and Acceptability of a Mobile Client Data App for Community-Based Maternal, Neonatal, and Child Care in Rural Ghana.

PubMed

Rothstein, Jessica D; Jennings, Larissa; Moorthy, Anitha; Yang, Fan; Gee, Lisa; Romano, Karen; Hutchful, David; Labrique, Alain B; LeFevre, Amnesty E

2016-01-01

Mobile phone applications may enhance the delivery of critical health services and the accuracy of health service data. Yet, the opinions and experiences of frontline health workers on using mobile apps to track pregnant and recently delivered women are underreported. This evaluation qualitatively assessed the feasibility, usability, and acceptability of a mobile Client Data App for maternal, neonatal, and child client data management by community health nurses (CHNs) in rural Ghana. The mobile app enabled CHNs to enter, summarize, and query client data. It also sent visit reminders for clients and provided a mechanism to report level of care to district officers. Fourteen interviews and two focus groups with CHNs, midwives, and district health officers were conducted, coded, and thematically analyzed. Results indicated that the app was easily integrated into care, improved CHN productivity, and was acceptable due to its capacity to facilitate client follow-up, data reporting, and decision-making. However, the feasibility and usability of the app were hindered by high client volumes, staff shortages, and software and device challenges. Successful integration of mobile client data apps for frontline health workers in rural and resource-poor settings requires real-time monitoring, program investments, and targeted changes in human resources.

Mediating the Cognitive Walkthrough with Patient Groups to achieve Personalized Health in Chronic Disease Self-Management System Evaluation.

PubMed

Georgsson, Mattias; Kushniruk, Andre

2016-01-01

The cognitive walkthrough (CW) is a task-based, expert inspection usability evaluation method involving benefits such as cost effectiveness and efficiency. A drawback of the method is that it doesn't involve the user perspective from real users but instead is based on experts' predictions about the usability of the system and how users interact. In this paper, we propose a way of involving the user in an expert evaluation method by modifying the CW with patient groups as mediators. This along with other modifications include a dual domain session facilitator, specific patient groups and three different phases: 1) a preparation phase where suitable tasks are developed by a panel of experts and patients, validated through the content validity index 2) a patient user evaluation phase including an individual and collaborative process part 3) an analysis and coding phase where all data is digitalized and synthesized making use of Qualitative Data Analysis Software (QDAS) to determine usability deficiencies. We predict that this way of evaluating will utilize the benefits of the expert methods, also providing a way of including the patient user of these self-management systems. Results from this prospective study should provide evidence of the usefulness of this method modification.

Qualitative Assessment of the Feasibility, Usability, and Acceptability of a Mobile Client Data App for Community-Based Maternal, Neonatal, and Child Care in Rural Ghana

PubMed Central

Jennings, Larissa; Moorthy, Anitha; Yang, Fan; Gee, Lisa; Romano, Karen; Hutchful, David; Labrique, Alain B.; LeFevre, Amnesty E.

2016-01-01

Mobile phone applications may enhance the delivery of critical health services and the accuracy of health service data. Yet, the opinions and experiences of frontline health workers on using mobile apps to track pregnant and recently delivered women are underreported. This evaluation qualitatively assessed the feasibility, usability, and acceptability of a mobile Client Data App for maternal, neonatal, and child client data management by community health nurses (CHNs) in rural Ghana. The mobile app enabled CHNs to enter, summarize, and query client data. It also sent visit reminders for clients and provided a mechanism to report level of care to district officers. Fourteen interviews and two focus groups with CHNs, midwives, and district health officers were conducted, coded, and thematically analyzed. Results indicated that the app was easily integrated into care, improved CHN productivity, and was acceptable due to its capacity to facilitate client follow-up, data reporting, and decision-making. However, the feasibility and usability of the app were hindered by high client volumes, staff shortages, and software and device challenges. Successful integration of mobile client data apps for frontline health workers in rural and resource-poor settings requires real-time monitoring, program investments, and targeted changes in human resources. PMID:28070186

Supporting Caregivers of Children With Acute Lymphoblastic Leukemia via a Smartphone App: A Pilot Study of Usability and Effectiveness.

PubMed

Wang, Jingting; Yao, Nengliang; Shen, Min; Zhang, Xiaoyan; Wang, Yuanyuan; Liu, Yanyan; Geng, Zhaohui; Yuan, Changrong

2016-11-01

Smartphone applications are widely used for self-help interventions in adult cancer survivors. However, applications for parents of pediatric cancer patients are limited. We developed an applications to assist parents of children with acute lymphoblastic leukemia. The aim of this study is to evaluate the app's usability and effectiveness in a preliminary way. A stepwise approach and mixed methods were used. The application was initially tested by healthcare providers, and their comments and suggestions were used to develop an updated version. This version was tested by parents of children with acute lymphoblastic leukemia. Comments and nonverbal expressions of parents were recorded during a 2-week pilot test. The qualitative study was followed by a quantitative study using audit log data from the administration portal to understand how parents use the application. Six healthcare providers and 15 parents participated. Parents gained a greater knowledge of leukemia, confidence in caregiving, social support, and information on how to reduce stress. Over usability was rated as stable, useful, simple, and self-explanatory. No software failure occurred. Applications have the potential to support caregivers of pediatric cancer patients. We plan to address limitations and perform an empirical interventional study to examine its clinical effectiveness.

Exploring the learnability and usability of a near field communication-based application for semantic enrichment in children with language disorders.

PubMed

Lorusso, Maria Luisa; Biffi, Emilia; Molteni, Massimo; Reni, Gianluigi

2018-01-01

Recently, a few software applications (apps) have been developed to enhance vocabulary and conceptual networks to address the needs of children with language impairments (LI), but there is no evidence about their impact and their usability in therapy contexts. Here, we try to fill this gap presenting a system aimed at improving the semantic competence and the structural knowledge of children with LI. The goal of the study is to evaluate learnability, usability, user satisfaction and quality of the interaction between the system and the children. The system consists of a tablet, hosting an app with educational and training purposes, equipped with a Near Field Communication (NFC) reader, used to interact with the user by means of objects. Fourteen preschool children with LI played with the device during one 45-minute speech therapy session. Reactions and feedbacks were recorded and rated. The system proved to be easy to understand and learn, as well as engaging and rewarding. The success of the device probably rests on the integration of smart technology and real, tangible objects. The device can be seen as a valuable aid to support and enhance communication abilities in children with LI as well as typically developing individuals.

Tailored prevention of inpatient falls: development and usability testing of the fall TIPS toolkit.

PubMed

Zuyev, Lyubov; Benoit, Angela N; Chang, Frank Y; Dykes, Patricia C

2011-02-01

Patient falls and fall-related injuries are serious problems in hospitals. The Fall TIPS application aims to prevent patient falls by translating routine nursing fall risk assessment into a decision support intervention that communicates fall risk status and creates a tailored evidence-based plan of care that is accessible to the care team, patients, and family members. In our design and implementation of the Fall TIPS toolkit, we used the Spiral Software Development Life Cycle model. Three output tools available to be generated from the toolkit are bed poster, plan of care, and patient education handout. A preliminary design of the application was based on initial requirements defined by project leaders and informed by focus groups with end users. Preliminary design partially simulated the paper version of the Morse Fall Scale currently used in hospitals involved in the research study. Strengths and weaknesses of the first prototype were identified by heuristic evaluation. Usability testing was performed at sites where research study is implemented. Suggestions mentioned by end users participating in usability studies were either directly incorporated into the toolkit and output tools, were slightly modified, or will be addressed during training. The next step is implementation of the fall prevention toolkit on the pilot testing units.

Knowledge management impact of information technology Web 2.0/3.0. The case study of agent software technology usability in knowledge management system

NASA Astrophysics Data System (ADS)

Sołtysik-Piorunkiewicz, Anna

2015-02-01

How we can measure the impact of internet technology Web 2.0/3.0 for knowledge management? How we can use the Web 2.0/3.0 technologies for generating, evaluating, sharing, organizing knowledge in knowledge-based organization? How we can evaluate it from user-centered perspective? Article aims to provide a method for evaluate the usability of web technologies to support knowledge management in knowledge-based organizations of the various stages of the cycle knowledge management, taking into account: generating knowledge, evaluating knowledge, sharing knowledge, etc. for the modern Internet technologies based on the example of agent technologies. The method focuses on five areas of evaluation: GUI, functional structure, the way of content publication, organizational aspect, technological aspect. The method is based on the proposed indicators relating respectively to assess specific areas of evaluation, taking into account the individual characteristics of the scoring. Each of the features identified in the evaluation is judged first point wise, then this score is subject to verification and clarification by means of appropriate indicators of a given feature. The article proposes appropriate indicators to measure the impact of Web 2.0/3.0 technologies for knowledge management and verification them in an example of agent technology usability in knowledge management system.

Evaluation of the functional performance and technical quality of an Electronic Documentation System of the Nursing Process.

PubMed

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2015-01-01

To evaluate the functional performance and the technical quality of the Electronic Documentation System of the Nursing Process of the Teaching Hospital of the University of São Paulo. exploratory-descriptive study. The Quality Model of regulatory standard 25010 and the Evaluation Process defined under regulatory standard 25040, both of the International Organization for Standardization/International Electrotechnical Commission. The quality characteristics evaluated were: functional suitability, reliability, usability, performance efficiency, compatibility, security, maintainability and portability. The sample was made up of 37 evaluators. in the evaluation of the specialists in information technology, only the characteristic of usability obtained a rate of positive responses of less than 70%. For the nurse lecturers, all the quality characteristics obtained a rate of positive responses of over 70%. The staff nurses of the medical and surgical clinics with experience in using the system) and staff nurses from other units of the hospital and from other health institutions (without experience in using the system) obtained rates of positive responses of more than 70% referent to the functional suitability, usability, and security. However, performance efficiency, reliability and compatibility all obtained rates below the parameter established. the software achieved rates of positive responses of over 70% for the majority of the quality characteristics evaluated.

Scaling Task Management in Space and Time: Reducing User Overhead in Ubiquitous-Computing Environments

DTIC Science & Technology

2005-03-28

consequently users are torn between taking advantage of increasingly pervasive computing systems, and the price (in attention and skill) that they have to... advantage of the surrounding computing environments; and (c) that it is usable by non-experts. Second, from a software architect’s perspective, we...take full advantage of the computing systems accessible to them, much as they take advantage of the furniture in each physical space. In the example

Seven ways to make a hypertext project fail

NASA Technical Reports Server (NTRS)

Glushko, Robert J.

1990-01-01

Hypertext is an exciting concept, but designing and developing hypertext applications of practical scale is hard. To make a project feasible and successful 'hypertext engineers' must overcome the following problems: (1) developing realistic expectations in the face of hypertext hype; (2) assembling a multidisciplinary project team; (3) establishing and following design guidelines; (4) dealing with installed base constraints; (5) obtaining usable source files; (6) finding appropriate software technology and methods; and (7) overcoming legal uncertainties about intellectual property concerns.

Open source pipeline for ESPaDOnS reduction and analysis

NASA Astrophysics Data System (ADS)

Martioli, Eder; Teeple, Doug; Manset, Nadine; Devost, Daniel; Withington, Kanoa; Venne, Andre; Tannock, Megan

2012-09-01

OPERA is a Canada-France-Hawaii Telescope (CFHT) open source collaborative software project currently under development for an ESPaDOnS echelle spectro-polarimetric image reduction pipeline. OPERA is designed to be fully automated, performing calibrations and reduction, producing one-dimensional intensity and polarimetric spectra. The calibrations are performed on two-dimensional images. Spectra are extracted using an optimal extraction algorithm. While primarily designed for CFHT ESPaDOnS data, the pipeline is being written to be extensible to other echelle spectrographs. A primary design goal is to make use of fast, modern object-oriented technologies. Processing is controlled by a harness, which manages a set of processing modules, that make use of a collection of native OPERA software libraries and standard external software libraries. The harness and modules are completely parametrized by site configuration and instrument parameters. The software is open- ended, permitting users of OPERA to extend the pipeline capabilities. All these features have been designed to provide a portable infrastructure that facilitates collaborative development, code re-usability and extensibility. OPERA is free software with support for both GNU/Linux and MacOSX platforms. The pipeline is hosted on SourceForge under the name "opera-pipeline".

Development of Integrated Modular Avionics Application Based on Simulink and XtratuM

NASA Astrophysics Data System (ADS)

Fons-Albert, Borja; Usach-Molina, Hector; Vila-Carbo, Joan; Crespo-Lorente, Alfons

2013-08-01

This paper presents an integral approach for designing avionics applications that meets the requirements for software development and execution of this application domain. Software design follows the Model-Based design process and is performed in Simulink. This approach allows easy and quick testbench development and helps satisfying DO-178B requirements through the use of proper tools. The software execution platform is based on XtratuM, a minimal bare-metal hypervisor designed in our research group. XtratuM provides support for IMA-SP (Integrated Modular Avionics for Space) architectures. This approach allows the code generation of a Simulink model to be executed on top of Lithos as XtratuM partition. Lithos is a ARINC-653 compliant RTOS for XtratuM. The paper concentrates in how to smoothly port Simulink designs to XtratuM solving problems like application partitioning, automatic code generation, real-time tasking, interfacing, and others. This process is illustrated with an autopilot design test using a flight simulator.

A META-COMPOSITE SOFTWARE DEVELOPMENT APPROACH FOR TRANSLATIONAL RESEARCH

PubMed Central

Sadasivam, Rajani S.; Tanik, Murat M.

2013-01-01

Translational researchers conduct research in a highly data-intensive and continuously changing environment and need to use multiple, disparate tools to achieve their goals. These researchers would greatly benefit from meta-composite software development or the ability to continuously compose and recompose tools together in response to their ever-changing needs. However, the available tools are largely disconnected, and current software approaches are inefficient and ineffective in their support for meta-composite software development. Building on the composite services development approach, the de facto standard for developing integrated software systems, we propose a concept-map and agent-based meta-composite software development approach. A crucial step in composite services development is the modeling of users’ needs as processes, which can then be specified in an executable format for system composition. We have two key innovations. First, our approach allows researchers (who understand their needs best) instead of technicians to take a leadership role in the development of process models, reducing inefficiencies and errors. A second innovation is that our approach also allows for modeling of complex user interactions as part of the process, overcoming the technical limitations of current tools. We demonstrate the feasibility of our approach using a real-world translational research use case. We also present results of usability studies evaluating our approach for future refinements. PMID:23504436

A meta-composite software development approach for translational research.

PubMed

Sadasivam, Rajani S; Tanik, Murat M

2013-06-01

Translational researchers conduct research in a highly data-intensive and continuously changing environment and need to use multiple, disparate tools to achieve their goals. These researchers would greatly benefit from meta-composite software development or the ability to continuously compose and recompose tools together in response to their ever-changing needs. However, the available tools are largely disconnected, and current software approaches are inefficient and ineffective in their support for meta-composite software development. Building on the composite services development approach, the de facto standard for developing integrated software systems, we propose a concept-map and agent-based meta-composite software development approach. A crucial step in composite services development is the modeling of users' needs as processes, which can then be specified in an executable format for system composition. We have two key innovations. First, our approach allows researchers (who understand their needs best) instead of technicians to take a leadership role in the development of process models, reducing inefficiencies and errors. A second innovation is that our approach also allows for modeling of complex user interactions as part of the process, overcoming the technical limitations of current tools. We demonstrate the feasibility of our approach using a real-world translational research use case. We also present results of usability studies evaluating our approach for future refinements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Kris A.; Scholtz, Jean; Whiting, Mark A.

The VAST Challenge has been a popular venue for academic and industry participants for over ten years. Many participants comment that the majority of their time in preparing VAST Challenge entries is discovering elements in their software environments that need to be redesigned in order to solve the given task. Fortunately, there is no need to wait until the VAST Challenge is announced to test out software systems. The Visual Analytics Benchmark Repository contains all past VAST Challenge tasks, data, solutions and submissions. This paper details the various types of evaluations that may be conducted using the Repository information. Inmore » this paper we describe how developers can do informal evaluations of various aspects of their visual analytics environments using VAST Challenge information. Aspects that can be evaluated include the appropriateness of the software for various tasks, the various data types and formats that can be accommodated, the effectiveness and efficiency of the process supported by the software, and the intuitiveness of the visualizations and interactions. Researchers can compare their visualizations and interactions to those submitted to determine novelty. In addition, the paper provides pointers to various guidelines that software teams can use to evaluate the usability of their software. While these evaluations are not a replacement for formal evaluation methods, this information can be extremely useful during the development of visual analytics environments.« less

Structuring software anthropometric variables on CD Rom as a facilitator of the process of design of work situations.

PubMed

Zanuncio, Sharinna Venturim; Mafra, Simone Caldas Tavares; Antônio, Carlos Emílio Barbosa; Lisboa Filho, Jugurta; Guimarães, Elza Maria Vidigal; da Silva, Vania Eugênia; de Souza, Amaury Paulo; Minette, Luciano José

2012-01-01

The environment where everyday activities are developed, these should be appropriate and the individual who will execute them, for greater efficiency of their work and even if you feel safe, comfortable and satisfied when interacting with that space, expending less energy to this interaction. Given this context, this study aims to structure a software with the results obtained in the field, from anthropometric measure to subsidize the furniture industry in manufacturing of furniture, definition work situations, considering the different anthropometric measurements made between 2001 and 2010, using data from this sample of adults aged 18 to 65 years old and children between 6 and 11 years old. It was convenient to make the software with a site, only instead of staying on the Web has been recorded on CD Rom. Tests with the prototype allow navigation through the structure of the software. The data needed to implement the remaining modules were also raised. Issues related to system layout and usability of the interface also were not considered, because it is an initial prototype.

Feasibility of Close-Range Photogrammetric Models for Geographic Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Luke; /Rice U.

2011-06-22

The objective of this project was to determine the feasibility of using close-range architectural photogrammetry as an alternative three dimensional modeling technique in order to place the digital models in a geographic information system (GIS) at SLAC. With the available equipment and Australis photogrammetry software, the creation of full and accurate models of an example building, Building 281 on SLAC campus, was attempted. After conducting several equipment tests to determine the precision achievable, a complete photogrammetric survey was attempted. The dimensions of the resulting models were then compared against the true dimensions of the building. A complete building model wasmore » not evidenced to be obtainable using the current equipment and software. This failure was likely attributable to the limits of the software rather than the precision of the physical equipment. However, partial models of the building were shown to be accurate and determined to still be usable in a GIS. With further development of the photogrammetric software and survey procedure, the desired generation of a complete three dimensional model is likely still feasible.« less

A Software Developer’s Guide to Informal Evaluation of Visual Analytics Environments Using VAST Challenge Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Kristin A.; Scholtz, Jean; Whiting, Mark A.

The VAST Challenge has been a popular venue for academic and industry participants for over ten years. Many participants comment that the majority of their time in preparing VAST Challenge entries is discovering elements in their software environments that need to be redesigned in order to solve the given task. Fortunately, there is no need to wait until the VAST Challenge is announced to test out software systems. The Visual Analytics Benchmark Repository contains all past VAST Challenge tasks, data, solutions and submissions. This paper details the various types of evaluations that may be conducted using the Repository information. Inmore » this paper we describe how developers can do informal evaluations of various aspects of their visual analytics environments using VAST Challenge information. Aspects that can be evaluated include the appropriateness of the software for various tasks, the various data types and formats that can be accommodated, the effectiveness and efficiency of the process supported by the software, and the intuitiveness of the visualizations and interactions. Researchers can compare their visualizations and interactions to those submitted to determine novelty. In addition, the paper provides pointers to various guidelines that software teams can use to evaluate the usability of their software. While these evaluations are not a replacement for formal evaluation methods, this information can be extremely useful during the development of visual analytics environments.« less

Pilot climate data system

NASA Technical Reports Server (NTRS)

1985-01-01

A usable data base, the Pilot climate Data System (PCDS) is described. The PCDS is designed to be an interactive, easy-to-use, on-line generalized scientific information system. It efficiently provides uniform data catalogs; inventories, and access method, as well as manipulation and display tools for a large assortment of Earth, ocean and atmospheric data for the climate-related research community. Researchers can employ the PCDS to scan, manipulate, compare, display, and study climate parameters from diverse data sets. Software features, and applications of the PCDS are highlighted.

An Experimental Evaluation of Image Quality for Various Scenarios in a Chromotomographic System With a Spinning Prism

DTIC Science & Technology

2014-03-27

pixels. The proprietary Phantom software allowed the user to crop down the usable pixels for FOV and speed purposes. Each recording was made with only the...sampled at discrete wavelengths and not a continuous spectrum, Mooney and Deming represent Equation (2.10) as a summation rather than an integral: Gm ...project were arbitrarily chosen between 1 and 10, with 5 being the most common. The full importance of µ was not investigated in this project. Lastly

The integration of a LANDSAT analysis capability with a geographic information system

NASA Technical Reports Server (NTRS)

Nordstrand, E. A.

1981-01-01

The integration of LANDSAT data was achieved through the development of a flexible, compatible analysis tool and using an existing data base to select the usable data from a LANDSAT analysis. The software package allows manipulation of grid cell data plus the flexibility to allow the user to include FORTRAN statements for special functions. Using this combination of capabilities the user can classify a LANDSAT image and then selectivity merge the results with other data that may exist for the study area.

Reference management software for systematic reviews and meta-analyses: an exploration of usage and usability.

PubMed

Lorenzetti, Diane L; Ghali, William A

2013-11-15

Reference management software programs enable researchers to more easily organize and manage large volumes of references typically identified during the production of systematic reviews. The purpose of this study was to determine the extent to which authors are using reference management software to produce systematic reviews; identify which programs are used most frequently and rate their ease of use; and assess the degree to which software usage is documented in published studies. We reviewed the full text of systematic reviews published in core clinical journals indexed in ACP Journal Club from 2008 to November 2011 to determine the extent to which reference management software usage is reported in published reviews. We surveyed corresponding authors to verify and supplement information in published reports, and gather frequency and ease-of-use data on individual reference management programs. Of the 78 researchers who responded to our survey, 79.5% reported that they had used a reference management software package to prepare their review. Of these, 4.8% reported this usage in their published studies. EndNote, Reference Manager, and RefWorks were the programs of choice for more than 98% of authors who used this software. Comments with respect to ease-of-use issues focused on the integration of this software with other programs and computer interfaces, and the sharing of reference databases among researchers. Despite underreporting of use, reference management software is frequently adopted by authors of systematic reviews. The transparency, reproducibility and quality of systematic reviews may be enhanced through increased reporting of reference management software usage.

Investigation of radar backscattering from second-year sea ice

NASA Technical Reports Server (NTRS)

Lei, Guang-Tsai; Moore, Richard K.; Gogineni, S. P.

1988-01-01

The scattering properties of second-year ice were studied in an experiment at Mould Bay in April 1983. Radar backscattering measurements were made at frequencies of 5.2, 9.6, 13.6, and 16.6 GHz for vertical polarization, horizontal polarization and cross polarizations, with incidence angles ranging from 15 to 70 deg. The results indicate that the second-year ice scattering characteristics were different from first-year ice and also different from multiyear ice. The fading properties of radar signals were studied and compared with experimental data. The influence of snow cover on sea ice can be evaluated by accounting for the increase in the number of independent samples from snow volume with respect to that for bare ice surface. A technique for calculating the snow depth was established by this principle and a reasonable agreement has been observed. It appears that this is a usable way to measure depth in snow or other snow-like media using radar.

Space Missions: Long Term Preservation of IDL-based Software using GDL

NASA Astrophysics Data System (ADS)

Coulais, A.; Schellens, M.; Arabas, S.; Lenoir, M.; Noreskal, L.; Erard, S.

2012-09-01

GNU Data Language (GDL) is a free software clone of IDL, an interactive language widely used in Astronomy and space missions since decades. Proprietary status, license restrictions, price, sustainability and continuity of support for particular platforms are recurrent concerns in the Astronomy community, especially concerning space missions, which require long-term support. In this paper, we describe the key features of GDL and the main achievements from recent development work. We illustrate the maturity of GDL by presenting two examples of application: reading spectral cubes in PDS format and use of the HEALPix library. These examples support the main argument of the paper: that GDL has reached a level of maturity and usability ensuring long term preservation of analysis capabilities for numerous ground experiments and spaces missions based on IDL.

An Empirical Evaluation of Automated Theorem Provers in Software Certification

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd; Schumann, Johann

2004-01-01

We describe a system for the automated certification of safety properties of NASA software. The system uses Hoare-style program verification technology to generate proof obligations which are then processed by an automated first-order theorem prover (ATP). We discuss the unique requirements this application places on the ATPs, focusing on automation, proof checking, and usability. For full automation, however, the obligations must be aggressively preprocessed and simplified, and we demonstrate how the individual simplification stages, which are implemented by rewriting, influence the ability of the ATPs to solve the proof tasks. Our results are based on 13 certification experiments that lead to more than 25,000 proof tasks which have each been attempted by Vampire, Spass, e-setheo, and Otter. The proofs found by Otter have been proof-checked by IVY.

Requirement analysis for an electronic laboratory notebook for sustainable data management in biomedical research.

PubMed

Menzel, Julia; Weil, Philipp; Bittihn, Philip; Hornung, Daniel; Mathieu, Nadine; Demiroglu, Sara Y

2013-01-01

Sustainable data management in biomedical research requires documentation of metadata for all experiments and results. Scientists usually document research data and metadata in laboratory paper notebooks. An electronic laboratory notebook (ELN) can keep metadata linked to research data resulting in a better understanding of the research results, meaning a scientific benefit [1]. Besides other challenges [2], the biggest hurdles for introducing an ELN seem to be usability, file formats, and data entry mechanisms [3] and that many ELNs are assigned to specific research fields such as biology, chemistry, or physics [4]. We aimed to identify requirements for the introduction of ELN software in a biomedical collaborative research center [5] consisting of different scientific fields and to find software fulfilling most of these requirements.

[The experiment research on solution refractive index sensor based on tilted fiber Bragg grating].

PubMed

Jiang, Qi; Lü, Dan-Dan; Yu, Ming-Hao; Kang, Li-Min; Ouyang, Jun

2013-12-01

The present paper analyzes the sensor's basic principle of the bare tilted fiber Bragg grating (TFBG) and surface plasmon resonance sensor (SPR) that deposited nanoscale gold-coating on the surface of the cladding. We simulated the transmission spectrums and some order cladding mode of TFBG in different concentration solutions by Integration and optical fiber grating software OptiGrating. So by the graphic observation and data analysis, a preliminary conclusion was got that in a certain sensing scope, the cladding modes of TFBG shift slightly to right with the increasing the solution refractive index(SRI),and the relation between resonance peak caused by the coupling of core mode and a certain cladding mode and the SRI was linear. Then the 45 nm thick gold coating was deposited on the surface of the TFBG cladding in a small-scale sputtering chamber KYKY SBC-12, and thermal field scanning electron microscopy presents that the effect of gold-coating was satisfactory to a certain extent in terms of microscopic level. The refractive index(RI) sensing experiments of different concentration solutions of NaCI, MgCI2, CaCI2 were carried out using bare and gold deposited TFBG. The RI sensing characteristics of both bare and gold deposited TFBGs respectively were studied by experiments. Meanwhile, it proved the conclusion that the cladding modes of TFBG drifted to right gradually when the SRI was increasing and the relations between resonance peak caused by the coupling of core mode and a certain cladding mode and the SRI were linear. And by quantitative analysis, we know that SPR sensor with the deposited namoscale gold layer on the surface of cladding enhanced the RI sensitivity dramatically by 2 to 500 nm RIU-1 which is 200 to 300 times larger than that of the bare tilted fiber Bragg grating approximately. The degrees of linear fittings of resonance peak caused by the coupling of core mode and a certain cladding mode and SRI of bare and gold-coating deposited SPR sensor are very good and both of them reach up to more than 0. 99.

SacLab: A toolbox for saccade analysis to increase usability of eye tracking systems in clinical ophthalmology practice.

PubMed

Cercenelli, Laura; Tiberi, Guido; Corazza, Ivan; Giannaccare, Giuseppe; Fresina, Michela; Marcelli, Emanuela

2017-01-01

Many open source software packages have been recently developed to expand the usability of eye tracking systems to study oculomotor behavior, but none of these is specifically designed to encompass all the main functions required for creating eye tracking tests and for providing the automatic analysis of saccadic eye movements. The aim of this study is to introduce SacLab, an intuitive, freely-available MATLAB toolbox based on Graphical User Interfaces (GUIs) that we have developed to increase the usability of the ViewPoint EyeTracker (Arrington Research, Scottsdale, AZ, USA) in clinical ophthalmology practice. SacLab consists of four processing modules that enable the user to easily create visual stimuli tests (Test Designer), record saccadic eye movements (Data Recorder), analyze the recorded data to automatically extract saccadic parameters of clinical interest (Data Analyzer) and provide an aggregate analysis from multiple eye movements recordings (Saccade Analyzer), without requiring any programming effort by the user. A demo application of SacLab to carry out eye tracking tests for the analysis of horizontal saccades was reported. We tested the usability of SacLab toolbox with three ophthalmologists who had no programming experience; the ophthalmologists were briefly trained in the use of SacLab GUIs and were asked to perform the demo application. The toolbox gained an enthusiastic feedback from all the clinicians in terms of intuitiveness, ease of use and flexibility. Test creation and data processing were accomplished in 52±21s and 46±19s, respectively, using the SacLab GUIs. SacLab may represent a useful tool to ease the application of the ViewPoint EyeTracker system in clinical routine in ophthalmology. Copyright © 2016 Elsevier Ltd. All rights reserved.

A virtual reality test battery for assessment and screening of spatial neglect.

PubMed

Fordell, H; Bodin, K; Bucht, G; Malm, J

2011-03-01

There is a need for improved screening methods for spatial neglect. To construct a VR-test battery and evaluate its accuracy and usability in patients with acute stroke. VR-DiSTRO consists of a standard desktop computer, a CRT monitor and eye shutter stereoscopic glasses, a force feedback interface, and software, developed to create an interactive and immersive 3D experience. VR-tests were developed and validated to the conventional Star Cancellation test, Line bisection, Baking Tray Task (BTT), and Visual Extinction test. A construct validation to The Rivermead Behavioral Inattention Test, used as criterion of visuospatial neglect, was made. Usability was assessed according to ISO 9241-11. Thirty-one patients with stroke were included, 9/31 patients had neglect. The sensitivity was 100% and the specificity 82% for the VR-DiSTRO to correctly identify neglect. VR-BTT and VR-Extinction had the highest correlation (r² = 0.64 and 0.78), as well as high sensitivity and specificity. The kappa values describing the agreement between traditional neglect tests and the corresponding virtual reality test were between 0.47-0.85. Usability was assessed by a questionnaire; 77% reported that the VR-DiSTRO was 'easy' to use. Eighty-eight percent reported that they felt 'focused', 'pleased' or 'alert'. No patient had adverse symptoms. The test session took 15 min. The VR-DiSTRO quickly and with a high accuracy identified visuospatial neglect in patients with stroke in this construct validation. The usability among elderly patients with stroke was high. This VR-test battery has the potential to become an important screening instrument for neglect and a valuable adjunct to the neuropsychological assessment. © 2010 John Wiley & Sons A/S.

The Usability of Online Geographic Virtual Reality for Urban Planning

NASA Astrophysics Data System (ADS)

Zhang, S.; Moore, A. B.

2013-08-01

Virtual reality (VR) technology is starting to become widely and freely available (for example the online OpenSimulator tool), with potential for use in 3D urban planning and design tasks but still needing rigorous assessment to establish this. A previous study consulted with a small group of urban professionals, who concluded in a satisfaction usability test that online VR had potential value as a usable 3D communication and remote marketing tool but acknowledged that visual quality and geographic accuracy were obstacles to overcome. This research takes the investigation a significant step further to also examine the usability aspects of efficiency (how quickly tasks are completed) and effectiveness (how successfully tasks are completed), relating to OpenSimulator in an urban planning situation. The comparative study pits a three-dimensional VR model (with increased graphic fidelity and geographic content to address the feedback of the previous study) of a subdivision design (in a Dunedin suburb) against 3D models built with GIS (ArcGIS) and CAD (BricsCAD) tools, two types of software environment well established in urban professional practice. Urban professionals participated in the study by attempting to perform timed tasks correctly in each of the environments before being asked questions about the technologies involved and their perceived importance to their professional work. The results reinforce the positive feedback for VR of the previous study, with the graphical and geographic data issues being somewhat addressed (though participants stressed the need for accurate and precise object and terrain modification capabilities in VR). Ease-ofuse and associated fastest task completion speed were significant positive outcomes to emerge from the comparison with GIS and CAD, pointing to a strong future for VR in an urban planning context.

Pre-operative segmentation of neck CT datasets for the planning of neck dissections

NASA Astrophysics Data System (ADS)

Cordes, Jeanette; Dornheim, Jana; Preim, Bernhard; Hertel, Ilka; Strauss, Gero

2006-03-01

For the pre-operative segmentation of CT neck datasets, we developed the software assistant NeckVision. The relevant anatomical structures for neck dissection planning can be segmented and the resulting patient-specific 3D-models are visualized afterwards in another software system for intervention planning. As a first step, we examined the appropriateness of elementary segmentation techniques based on gray values and contour information to extract the structures in the neck region from CT data. Region growing, interactive watershed transformation and live-wire are employed for segmentation of different target structures. It is also examined, which of the segmentation tasks can be automated. Based on this analysis, the software assistant NeckVision was developed to optimally support the workflow of image analysis for clinicians. The usability of NeckVision was tested within a first evaluation with four otorhinolaryngologists from the university hospital of Leipzig, four computer scientists from the university of Magdeburg and two laymen in both fields.

MPA Portable: A Stand-Alone Software Package for Analyzing Metaproteome Samples on the Go.

PubMed

Muth, Thilo; Kohrs, Fabian; Heyer, Robert; Benndorf, Dirk; Rapp, Erdmann; Reichl, Udo; Martens, Lennart; Renard, Bernhard Y

2018-01-02

Metaproteomics, the mass spectrometry-based analysis of proteins from multispecies samples faces severe challenges concerning data analysis and results interpretation. To overcome these shortcomings, we here introduce the MetaProteomeAnalyzer (MPA) Portable software. In contrast to the original server-based MPA application, this newly developed tool no longer requires computational expertise for installation and is now independent of any relational database system. In addition, MPA Portable now supports state-of-the-art database search engines and a convenient command line interface for high-performance data processing tasks. While search engine results can easily be combined to increase the protein identification yield, an additional two-step workflow is implemented to provide sufficient analysis resolution for further postprocessing steps, such as protein grouping as well as taxonomic and functional annotation. Our new application has been developed with a focus on intuitive usability, adherence to data standards, and adaptation to Web-based workflow platforms. The open source software package can be found at https://github.com/compomics/meta-proteome-analyzer .

ISS Propulsion Module Crew Systems Interface Analysis in the Intelligent Synthesis Environment

NASA Technical Reports Server (NTRS)

Chen, Di-Wen

1999-01-01

ERGO, a human modeling software for ergonomic assessment and task analysis, was used for the crew systems interface analysis of the International Space Station (ISS) Propulsion Module (PM). The objective of analysis was to alleviate passageway size concerns. Three basic passageway configuration concepts: (1) 45" clear passageway without centerline offset (2) 50" clear passageway, 12" centerline offset, (3) 50" clear passageway, no centerline offset, and were reviewed. 95 percentile male and female models which were provided by the software performed crew system analysis from an anthropometric point of view. Four scenarios in which the crew floats in microgravity through a 50" no-offset passageway as they carry a 16" x 20" x 30" avionics box were simulated in the 10-weeks of intensive study. From the results of the analysis, concept (3) was the preferred option. A full scale, three-dimensional virtual model of the ISS Propulsion Module was created to experience the sense of the Intelligent Synthesis Environment and to evaluate the usability and applicability of the software.

A New Generation of Telecommunications for Mars: The Reconfigurable Software Radio

NASA Technical Reports Server (NTRS)

Adams, J.; Horne, W.

2000-01-01

Telecommunications is a critical component for any mission at Mars as it is an enabling function that provides connectivity back to Earth and provides a means for conducting science. New developments in telecommunications, specifically in software - configurable radios, expand the possible approaches for science missions at Mars. These radios provide a flexible and re-configurable platform that can evolve with the mission and that provide an integrated approach to communications and science data processing. Deep space telecommunication faces challenges not normally faced by terrestrial and near-earth communications. Radiation, thermal, highly constrained mass, volume, packaging and reliability all are significant issues. Additionally, once the spacecraft leaves earth, there is no way to go out and upgrade or replace radio components. The reconfigurable software radio is an effort to provide not only a product that is immediately usable in the harsh space environment but also to develop a radio that will stay current as the years pass and technologies evolve.

Towards a virtual health record for mobile home care of elderly citizens.

PubMed

Koch, Sabine; Hägglund, Maria; Scandurra, Isabella; Moström, Dennis

2004-01-01

Mobile work situations within home care of the elderly require immediate and ubiquitous access to patient-oriented data. The ongoing Swedish research project "Technical support for Mobile CloseCare" focuses on the development and evaluation of work-scenario oriented ICT support for enhanced home care of elderly citizens. The aim of the project is to provide a seamless and consistent information flow between different health care providers and to give intuitive access to information services for the elderly and their relatives. For that purpose, different independent software components are connected through a mobile communication platform. Flexible access to prioritized information for different users in different work situations will be given through a virtual health record. In order to obtain both usable and clinically relevant results, a user centered system development approach is followed. Evaluation of the project results will be based on usability tests and quasi-experimental studies on how system implementation influences quality of care and job- and life satisfaction for care providers, patients and relatives.

Technology for home dementia care: A prototype locating system put to the test.

PubMed

Megges, Herlind; Freiesleben, Silka Dawn; Jankowski, Natalie; Haas, Brigitte; Peters, Oliver

2017-09-01

The user experience of persons with dementia and their primary caregivers with locating systems is not firmly established. Eighteen dyads used a prototype locating system during 4 weeks. Primary outcome measures were ratings of usability, and product functions and features. Secondary outcome measures were caregiver burden, perceived self-efficacy, frequency of use, and willingness to purchase the prototype. Changes in scores between baseline (T 1 ) and end of testing period (T 2 ) were compared by performing independent and dependent samples correlations and descriptive statistics. Seventeen dyads made up the final sample. Ratings of usability and product functions and features were fair, but usability ratings were significantly reduced after 4 weeks. Although the prototype was used infrequently by majority of the participants, most caregivers would be willing to purchase the prototype, with men more willing than women. No significant change in technological willingness, caregiver burden, or perceived self-efficacy was found between T 1 and T 2 . Perceived self-efficacy significantly negatively correlated with willingness to purchase the prototype after 4 weeks. Results highlight the importance of including end users in the research and development phase of locating systems to improve the user experience in home dementia care. Necessary indications for further research are carrying out randomized controlled trials with larger, more representative samples and developing innovative software and hardware solutions.

Evidence-based development and first usability testing of a social serious game based multi-modal system for early screening for atypical socio-cognitive development.

PubMed

Gyori, Miklos; Borsos, Zsófia; Stefanik, Krisztina

2015-01-01

At current, screening for, and diagnosis of, autism spectrum disorders (ASD) are based on purely behavioral data; established screening tools rely on human observation and ratings of relevant behaviors. The research and development project in the focus of this paper is aimed at designing, creating and evaluating a social serious game based multi-modal, interactive software system for screening for high functioning cases of ASD at kindergarten age. The aims of this paper are (1) to summarize the evidence-based design process and (2) to present results from the first usability test of the system. Game topic, candidate responses, and candidate game contents were identified via an iterative literature review. On this basis, the 1^st partial prototype of the fully playable game has been created, with complete data recording functionality but without the decision making component. A first usability test was carried out on this prototype (n=13). Overall results were unambiguously promising. Although sporadic difficulties in, and slightly negative attitudes towards, using the game occasionally arose, these were confined to non-target-group children only. The next steps of development include (1) completing the game design; (2) carrying out first large-n field test; (3) creating the first prototype of the decision making component.

Glioblastoma Segmentation: Comparison of Three Different Software Packages.

PubMed

Fyllingen, Even Hovig; Stensjøen, Anne Line; Berntsen, Erik Magnus; Solheim, Ole; Reinertsen, Ingerid

2016-01-01

To facilitate a more widespread use of volumetric tumor segmentation in clinical studies, there is an urgent need for reliable, user-friendly segmentation software. The aim of this study was therefore to compare three different software packages for semi-automatic brain tumor segmentation of glioblastoma; namely BrainVoyagerTM QX, ITK-Snap and 3D Slicer, and to make data available for future reference. Pre-operative, contrast enhanced T1-weighted 1.5 or 3 Tesla Magnetic Resonance Imaging (MRI) scans were obtained in 20 consecutive patients who underwent surgery for glioblastoma. MRI scans were segmented twice in each software package by two investigators. Intra-rater, inter-rater and between-software agreement was compared by using differences of means with 95% limits of agreement (LoA), Dice's similarity coefficients (DSC) and Hausdorff distance (HD). Time expenditure of segmentations was measured using a stopwatch. Eighteen tumors were included in the analyses. Inter-rater agreement was highest for BrainVoyager with difference of means of 0.19 mL and 95% LoA from -2.42 mL to 2.81 mL. Between-software agreement and 95% LoA were very similar for the different software packages. Intra-rater, inter-rater and between-software DSC were ≥ 0.93 in all analyses. Time expenditure was approximately 41 min per segmentation in BrainVoyager, and 18 min per segmentation in both 3D Slicer and ITK-Snap. Our main findings were that there is a high agreement within and between the software packages in terms of small intra-rater, inter-rater and between-software differences of means and high Dice's similarity coefficients. Time expenditure was highest for BrainVoyager, but all software packages were relatively time-consuming, which may limit usability in an everyday clinical setting.

Comparing the Microsoft Kinect to a traditional mouse for adjusting the viewed tissue densities of three-dimensional anatomical structures

NASA Astrophysics Data System (ADS)

Juhnke, Bethany; Berron, Monica; Philip, Adriana; Williams, Jordan; Holub, Joseph; Winer, Eliot

2013-03-01

Advancements in medical image visualization in recent years have enabled three-dimensional (3D) medical images to be volume-rendered from magnetic resonance imaging (MRI) and computed tomography (CT) scans. Medical data is crucial for patient diagnosis and medical education, and analyzing these three-dimensional models rather than two-dimensional (2D) slices would enable more efficient analysis by surgeons and physicians, especially non-radiologists. An interaction device that is intuitive, robust, and easily learned is necessary to integrate 3D modeling software into the medical community. The keyboard and mouse configuration does not readily manipulate 3D models because these traditional interface devices function within two degrees of freedom, not the six degrees of freedom presented in three dimensions. Using a familiar, commercial-off-the-shelf (COTS) device for interaction would minimize training time and enable maximum usability with 3D medical images. Multiple techniques are available to manipulate 3D medical images and provide doctors more innovative ways of visualizing patient data. One such example is windowing. Windowing is used to adjust the viewed tissue density of digital medical data. A software platform available at the Virtual Reality Applications Center (VRAC), named Isis, was used to visualize and interact with the 3D representations of medical data. In this paper, we present the methodology and results of a user study that examined the usability of windowing 3D medical imaging using a Kinect™ device compared to a traditional mouse.

Evaluating the Usability and Usefulness of a Mobile App for Atrial Fibrillation Using Qualitative Methods: Exploratory Pilot Study

PubMed Central

Mansour, Moussa; Sperber, Jodi; Agboola, Stephen; Kvedar, Joseph; Jethwani, Kamal

2018-01-01

Background Atrial fibrillation (AFib) is the most common form of heart arrhythmia and a potent risk factor for stroke. Nonvitamin K antagonist oral anticoagulants (NOACs) are routinely prescribed to manage AFib stroke risk; however, nonadherence to treatment is a concern. Additional tools that support self-care and medication adherence may benefit patients with AFib. Objective The aim of this study was to evaluate the perceived usability and usefulness of a mobile app designed to support self-care and treatment adherence for AFib patients who are prescribed NOACs. Methods A mobile app to support AFib patients was previously developed based on early stage interview and usability test data from clinicians and patients. An exploratory pilot study consisting of naturalistic app use, surveys, and semistructured interviews was then conducted to examine patients’ perceptions and everyday use of the app. Results A total of 12 individuals with an existing diagnosis of nonvalvular AFib completed the 4-week study. The average age of participants was 59 years. All participants somewhat or strongly agreed that the app was easy to use, and 92% (11/12) reported being satisfied or very satisfied with the app. Participant feedback identified changes that may improve app usability and usefulness for patients with AFib. Areas of usability improvement were organized by three themes: app navigation, clarity of app instructions and design intent, and software bugs. Perceptions of app usefulness were grouped by three key variables: core needs of the patient segment, patient workflow while managing AFib, and the app’s ability to support the patient’s evolving needs. Conclusions The results of this study suggest that mobile tools that target self-care and treatment adherence may be helpful to AFib patients, particularly those who are newly diagnosed. Additionally, participant feedback provided insight into the varied needs and health experiences of AFib patients, which may improve the design and targeting of the intervention. Pilot studies that qualitatively examine patient perceptions of usability and usefulness are a valuable and often underutilized method for assessing the real-world acceptability of an intervention. Additional research evaluating the AFib Connect mobile app over a longer period, and including a larger, more diverse sample of AFib patients, will be helpful for understanding whether the app is perceived more broadly to be useful and effective in supporting patient self-care and medication adherence. PMID:29549073

Semantic Entity-Component State Management Techniques to Enhance Software Quality for Multimodal VR-Systems.

PubMed

Fischbach, Martin; Wiebusch, Dennis; Latoschik, Marc Erich

2017-04-01

Modularity, modifiability, reusability, and API usability are important software qualities that determine the maintainability of software architectures. Virtual, Augmented, and Mixed Reality (VR, AR, MR) systems, modern computer games, as well as interactive human-robot systems often include various dedicated input-, output-, and processing subsystems. These subsystems collectively maintain a real-time simulation of a coherent application state. The resulting interdependencies between individual state representations, mutual state access, overall synchronization, and flow of control implies a conceptual close coupling whereas software quality asks for a decoupling to develop maintainable solutions. This article presents five semantics-based software techniques that address this contradiction: Semantic grounding, code from semantics, grounded actions, semantic queries, and decoupling by semantics. These techniques are applied to extend the well-established entity-component-system (ECS) pattern to overcome some of this pattern's deficits with respect to the implied state access. A walk-through of central implementation aspects of a multimodal (speech and gesture) VR-interface is used to highlight the techniques' benefits. This use-case is chosen as a prototypical example of complex architectures with multiple interacting subsystems found in many VR, AR and MR architectures. Finally, implementation hints are given, lessons learned regarding maintainability pointed-out, and performance implications discussed.

Conceptualization and application of an approach for designing healthcare software interfaces.

PubMed

Kumar, Ajit; Maskara, Reena; Maskara, Sanjeev; Chiang, I-Jen

2014-06-01

The aim of this study is to conceptualize a novel approach, which facilitates us to design prototype interfaces for healthcare software. Concepts and techniques from various disciplines were used to conceptualize an interface design approach named MORTARS (Map Original Rhetorical To Adapted Rhetorical Situation). The concepts and techniques included in this approach are (1) rhetorical situation - a concept of philosophy provided by Bitzer (1968); (2) move analysis - an applied linguistic technique provided by Swales (1990) and Bhatia (1993); (3) interface design guidelines - a cognitive and computer science concept provided by Johnson (2010); (4) usability evaluation instrument - an interface evaluation questionnaire provided by Lund (2001); (5) user modeling via stereotyping - a cognitive and computer science concept provided by Rich (1979). A prototype interface for outpatient clinic software was designed to introduce the underlying concepts of MORTARS. The prototype interface was evaluated by thirty-two medical informaticians. The medical informaticians found the designed prototype interface to be useful (73.3%), easy to use (71.9%), easy to learn (93.1%), and satisfactory (53.2%). MORTARS approach was found to be effective in designing the prototype user interface for the outpatient clinic software. This approach might be further used to design interfaces for various software pertaining to healthcare and other domains. Copyright © 2014 Elsevier Inc. All rights reserved.

Buying in to bioinformatics: an introduction to commercial sequence analysis software

PubMed Central

2015-01-01

Advancements in high-throughput nucleotide sequencing techniques have brought with them state-of-the-art bioinformatics programs and software packages. Given the importance of molecular sequence data in contemporary life science research, these software suites are becoming an essential component of many labs and classrooms, and as such are frequently designed for non-computer specialists and marketed as one-stop bioinformatics toolkits. Although beautifully designed and powerful, user-friendly bioinformatics packages can be expensive and, as more arrive on the market each year, it can be difficult for researchers, teachers and students to choose the right software for their needs, especially if they do not have a bioinformatics background. This review highlights some of the currently available and most popular commercial bioinformatics packages, discussing their prices, usability, features and suitability for teaching. Although several commercial bioinformatics programs are arguably overpriced and overhyped, many are well designed, sophisticated and, in my opinion, worth the investment. If you are just beginning your foray into molecular sequence analysis or an experienced genomicist, I encourage you to explore proprietary software bundles. They have the potential to streamline your research, increase your productivity, energize your classroom and, if anything, add a bit of zest to the often dry detached world of bioinformatics. PMID:25183247

Buying in to bioinformatics: an introduction to commercial sequence analysis software.

PubMed

Smith, David Roy

2015-07-01

Advancements in high-throughput nucleotide sequencing techniques have brought with them state-of-the-art bioinformatics programs and software packages. Given the importance of molecular sequence data in contemporary life science research, these software suites are becoming an essential component of many labs and classrooms, and as such are frequently designed for non-computer specialists and marketed as one-stop bioinformatics toolkits. Although beautifully designed and powerful, user-friendly bioinformatics packages can be expensive and, as more arrive on the market each year, it can be difficult for researchers, teachers and students to choose the right software for their needs, especially if they do not have a bioinformatics background. This review highlights some of the currently available and most popular commercial bioinformatics packages, discussing their prices, usability, features and suitability for teaching. Although several commercial bioinformatics programs are arguably overpriced and overhyped, many are well designed, sophisticated and, in my opinion, worth the investment. If you are just beginning your foray into molecular sequence analysis or an experienced genomicist, I encourage you to explore proprietary software bundles. They have the potential to streamline your research, increase your productivity, energize your classroom and, if anything, add a bit of zest to the often dry detached world of bioinformatics. © The Author 2014. Published by Oxford University Press.

Hyperspectral analysis of seagrass in Redfish Bay, Texas

NASA Astrophysics Data System (ADS)

Wood, John S.

Remote sensing using multi- and hyperspectral imaging and analysis has been used in resource management for quite some time, and for a variety of purposes. In the studies to follow, hyperspectral imagery of Redfish Bay is used to discriminate between species of seagrasses found below the water surface. Water attenuates and reflects light and energy from the electromagnetic spectrum, and as a result, subsurface analysis can be more complex than that performed in the terrestrial world. In the following studies, an iterative process is developed, using ENVI image processing software and ArcGIS software. Band selection was based on recommendations developed empirically in conjunction with ongoing research into depth corrections, which were applied to the imagery bands (a default depth of 65 cm was used). Polygons generated, classified and aggregated within ENVI are reclassified in ArcGIS using field site data that was randomly selected for that purpose. After the first iteration, polygons that remain classified as 'Mixed' are subjected to another iteration of classification in ENVI, then brought into ArcGIS and reclassified. Finally, when that classification scheme is exhausted, a supervised classification is performed, using a 'Maximum Likelihood' classification technique, which assigned the remaining polygons to the classification that was most like the training polygons, by digital number value. Producer's Accuracy by classification ranged from 23.33 % for the 'MixedMono' class to 66.67% for the 'Bare' class; User's Accuracy by classification ranged from 22.58% for the 'MixedMono' class to 69.57% for the 'Bare' classification. An overall accuracy of 37.93% was achieved. Producers and Users Accuracies for Halodule were 29% and 39%, respectively; for Thalassia, they were 46% and 40%. Cohen's Kappa Coefficient was calculated at .2988. We then returned to the field and collected spectral signatures of monotypic stands of seagrass at varying depths and at three sensor levels: above the water surface, just below the air/water interface, and at the canopy position, when it differed from the subsurface position. Analysis of plots of these spectral curves, after applying depth corrections and Multiplicative Scatter Correction, indicates that there are detectable spectral differences between Halodule and Thalassia species at all three positions. Further analysis indicated that only above-surface spectral signals could reliably be used to discriminate between species, because there was an overlap of the standard deviations in the other two positions. A recommendation for wavelengths that would produce increased accuracy in hyperspectral image analysis was made, based on areas where there is a significant amount of difference between the mean spectral signatures, and no overlap of the standard deviations in our samples. The original hyperspectral imagery was reprocessed, using the bands recommended from the research above (approximately 535, 600, 620, 638, and 656 nm). A depth raster was developed from various available sources, which was resampled and reclassified to reflect values for water absorption and water scattering, which were then applied to each band using the depth correction algorithm. Processing followed the iterative classification methods described above. Accuracy for this round of processing improved; overall accuracy increased from 38% to 57%. Improvements were noted in Producer's Accuracy, with the 'Bare' vi classification increasing from 67% to 73%, Halodule increasing from 29% to 63%, Thalassia increasing slightly, from 46% to 50%, and 'MixedMono' improving from 23% to 42%. User's Accuracy also improved, with the 'Bare' class increasing from 69% to 70%, Halodule increasing from 39% to 67%, Thalassia increasing from 40% to 7%, and 'MixedMono' increasing from 22.5% to 35%. A very recent report shows the mean percent cover of seagrasses in Redfish Bay and Corpus Christi Bay combined for all species at 68.6%, and individually by species: Halodule 39.8%, Thalassia 23.7%, Syringodium 4%, Ruppia 1% and Halophila 0.1%. Our study classifies 15% as 'Bare', 23% Halodule, 18% Thalassia, and 2% Ruppia. In addition, we classify 5% as 'Mixed', 22% as 'MixedMono', 12% as 'Bare/Halodule Mix', and 3% 'Bare/Thalassia Mix'. Aggregating the 'Bare' and 'Bare/species' classes would equate to approximately 30%, very close to what this new study produces. Other classes are quite similar, when considering that their study includes no 'Mixed' classifications. This series of research studies illustrates the application and utility of hyperspectral imagery and associated processing to mapping shallow benthic habitats. It also demonstrates that the technology is rapidly changing and adapting, which will lead to even further increases in accuracy. Future studies with hyperspectral imaging should include extensive spectral field collection, and the application of a depth correction.

[Confirming the Utility of RAISUS Antifungal Susceptibility Testing by New-Software].

PubMed

Ono, Tomoko; Suematsu, Hiroyuki; Sawamura, Haruki; Yamagishi, Yuka; Mikamo, Hiroshige

2017-08-15

Clinical and Laboratory Standards Institute (CLSI) methods for susceptibility tests of yeast are used in Japan. On the other hand, the methods have some disadvantage; 1) reading at 24 and 48 h, 2) using unclear scale, approximately 50% inhibition, to determine MICs, 3) calculating trailing growth and paradoxical effects. These makes it difficult to test the susuceptibility for yeasts. Old software of RAISUS, Ver. 6.0 series, resolved problem 1) and 2) but did not resolve problem 3). Recently, new software of RAISUS, Ver. 7.0 series, resolved problem 3). We confirmed that using the new software made it clear whether all these issue were settled or not. Eighty-four Candida isolated from Aichi Medical University was used in this study. We compared the MICs obtained by using RAISUS antifungal susceptibility testing of yeasts RSMY1, RSMY1, with those obtained by using ASTY. The concordance rates (±four-fold of MICs) between the MICs obtained by using ASTY and RSMY1 with the new software were more than 90%, except for miconazole (MCZ). The rate of MCZ was low, but MICs obtained by using CLSI methods and Yeast-like Fungus DP 'EIKEN' methods, E-DP, showed equivalent MICs of RSMY1 using the new software. The frequency of skip effects on RSMY1 using the new software markedly decreased relative to RSMY1 using the old software. In case of showing trailing growth, the new software of RAISUS made it possible to choice the correct MICs and to put up the sign of trailing growth on the result screen. New software of RAISUS enhances its usability and the accuracy of MICs. Using automatic instrument to determine MICs is useful to obtain objective results easily.

Introducing the CUAHSI Hydrologic Information System Desktop Application (HydroDesktop) and Open Development Community

NASA Astrophysics Data System (ADS)

Ames, D.; Kadlec, J.; Horsburgh, J. S.; Maidment, D. R.

2009-12-01

The Consortium of Universities for the Advancement of Hydrologic Sciences (CUAHSI) Hydrologic Information System (HIS) project includes extensive development of data storage and delivery tools and standards including WaterML (a language for sharing hydrologic data sets via web services); and HIS Server (a software tool set for delivering WaterML from a server); These and other CUASHI HIS tools have been under development and deployment for several years and together, present a relatively complete software “stack” to support the consistent storage and delivery of hydrologic and other environmental observation data. This presentation describes the development of a new HIS software tool called “HydroDesktop” and the development of an online open source software development community to update and maintain the software. HydroDesktop is a local (i.e. not server-based) client side software tool that ultimately will run on multiple operating systems and will provide a highly usable level of access to HIS services. The software provides many key capabilities including data query, map-based visualization, data download, local data maintenance, editing, graphing, data export to selected model-specific data formats, linkage with integrated modeling systems such as OpenMI, and ultimately upload to HIS servers from the local desktop software. As the software is presently in the early stages of development, this presentation will focus on design approach and paradigm and is viewed as an opportunity to encourage participation in the open development community. Indeed, recognizing the value of community based code development as a means of ensuring end-user adoption, this project has adopted an “iterative” or “spiral” software development approach which will be described in this presentation.

CmapTools: A Software Environment for Knowledge Modeling and Sharing

NASA Technical Reports Server (NTRS)

Canas, Alberto J.

2004-01-01

In an ongoing collaborative effort between a group of NASA Ames scientists and researchers at the Institute for Human and Machine Cognition (IHMC) of the University of West Florida, a new version of CmapTools has been developed that enable scientists to construct knowledge models of their domain of expertise, share them with other scientists, make them available to anybody on the Internet with access to a Web browser, and peer-review other scientists models. These software tools have been successfully used at NASA to build a large-scale multimedia on Mars and in knowledge model on Habitability Assessment. The new version of the software places emphasis on greater usability for experts constructing their own knowledge models, and support for the creation of large knowledge models with large number of supporting resources in the forms of images, videos, web pages, and other media. Additionally, the software currently allows scientists to cooperate with each other in the construction, sharing and criticizing of knowledge models. Scientists collaborating from remote distances, for example researchers at the Astrobiology Institute, can concurrently manipulate the knowledge models they are viewing without having to do this at a special videoconferencing facility.

MoKey: A versatile exergame creator for everyday usage.

PubMed

Eckert, Martina; López, Marcos; Lázaro, Carlos; Meneses, Juan

2017-11-27

Currently, virtual applications for physical exercises are highly appreciated as rehabilitation instruments. This article presents a middleware called "MoKey" (Motion Keyboard), which converts standard off-the-shelf software into exergames (exercise games). A configurable set of gestures, captured by a motion capture camera, is translated into the key strokes required by the chosen software. The present study assesses the tool regarding usability and viability on a heterogeneous group of 11 participants, aged 5 to 51, with moderate to severe disabilities, and mostly bound to a wheelchair. In comparison with FAAST (The Flexible Action and Articulated Skeleton Toolkit), MoKey achieved better results in terms of ease of use and computational load. The viability as an exergame creator tool was proven with help of four applications (PowerPoint®, e-book reader, Skype®, and Tetris). Success rates of up to 91% have been achieved, subjective perception was rated with 4.5 points (from 0-5). The middleware provides increased motivation due to the use of favorite software and the advantage of exploiting it for exercise. Used together with communication software or online games, social inclusion can be stimulated. The therapists can employ the tool to monitor the correctness and progress of the exercises.

Enabling Disabled Persons to Gain Access to Digital Media

NASA Technical Reports Server (NTRS)

Beach, Glenn; OGrady, Ryan

2011-01-01

A report describes the first phase in an effort to enhance the NaviGaze software to enable profoundly disabled persons to operate computers. (Running on a Windows-based computer equipped with a video camera aimed at the user s head, the original NaviGaze software processes the user's head movements and eye blinks into cursor movements and mouse clicks to enable hands-free control of the computer.) To accommodate large variations in movement capabilities among disabled individuals, one of the enhancements was the addition of a graphical user interface for selection of parameters that affect the way the software interacts with the computer and tracks the user s movements. Tracking algorithms were improved to reduce sensitivity to rotations and reduce the likelihood of tracking the wrong features. Visual feedback to the user was improved to provide an indication of the state of the computer system. It was found that users can quickly learn to use the enhanced software, performing single clicks, double clicks, and drags within minutes of first use. Available programs that could increase the usability of NaviGaze were identified. One of these enables entry of text by using NaviGaze as a mouse to select keys on a virtual keyboard.

An Approach for On-Board Software Building Blocks Cooperation and Interfaces Definition

NASA Astrophysics Data System (ADS)

Pascucci, Dario; Campolo, Giovanni; Candia, Sante; Lisio, Giovanni

2010-08-01

This paper provides an insight on the Avionic SW architecture developed by Thales Alenia Space Italy (TAS-I) to achieve structuring of the OBSW as a set of self-standing and re-usable building blocks. It is initially described the underlying framework for building blocks cooperation, which is based on ECSSE-70 packets forwarding (for services request to a building block) and standard parameters exchange for data communication. Subsequently it is discussed the high level of flexibility and scalability of the resulting architecture, reporting as example an implementation of the Failure Detection, Isolation and Recovery (FDIR) function which exploits the proposed architecture. The presented approach evolves from avionic SW architecture developed in the scope of the project PRIMA (Mult-Purpose Italian Re-configurable Platform) and has been adopted for the Sentinel-1 Avionic Software (ASW).

Charliecloud: Unprivileged containers for user-defined software stacks in HPC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Priedhorsky, Reid; Randles, Timothy C.

Supercomputing centers are seeing increasing demand for user-defined software stacks (UDSS), instead of or in addition to the stack provided by the center. These UDSS support user needs such as complex dependencies or build requirements, externally required configurations, portability, and consistency. The challenge for centers is to provide these services in a usable manner while minimizing the risks: security, support burden, missing functionality, and performance. We present Charliecloud, which uses the Linux user and mount namespaces to run industry-standard Docker containers with no privileged operations or daemons on center resources. Our simple approach avoids most security risks while maintaining accessmore » to the performance and functionality already on offer, doing so in less than 500 lines of code. Charliecloud promises to bring an industry-standard UDSS user workflow to existing, minimally altered HPC resources.« less

Key Points to Facilitate the Adoption of Computer-Based Assessments.

PubMed

Burr, S A; Chatterjee, A; Gibson, S; Coombes, L; Wilkinson, S

2016-01-01

There are strong pedagogical arguments in favor of adopting computer-based assessment. The risks of technical failure can be managed and are offset by improvements in cost-effectiveness and quality assurance capability. Academic, administrative, and technical leads at an appropriately senior level within an institution need to be identified, so that they can act as effective advocates. All stakeholder groups need to be represented in undertaking a detailed appraisal of requirements and shortlisting software based on core functionality, summative assessment life cycle needs, external compatibility, security, and usability. Any software that is a candidate for adoption should be trialed under simulated summative conditions, with all stakeholders having a voice in agreeing the optimum solution. Transfer to a new system should be carefully planned and communicated, with a programme of training established to maximize the success of adoption.

Key Points to Facilitate the Adoption of Computer-Based Assessments

PubMed Central

Burr, S.A.; Chatterjee, A.; Gibson, S.; Coombes, L.; Wilkinson, S.

2016-01-01

There are strong pedagogical arguments in favor of adopting computer-based assessment. The risks of technical failure can be managed and are offset by improvements in cost-effectiveness and quality assurance capability. Academic, administrative, and technical leads at an appropriately senior level within an institution need to be identified, so that they can act as effective advocates. All stakeholder groups need to be represented in undertaking a detailed appraisal of requirements and shortlisting software based on core functionality, summative assessment life cycle needs, external compatibility, security, and usability. Any software that is a candidate for adoption should be trialed under simulated summative conditions, with all stakeholders having a voice in agreeing the optimum solution. Transfer to a new system should be carefully planned and communicated, with a programme of training established to maximize the success of adoption. PMID:29349322

Acquisition of Structure and Interpretation: Cases from Mandarin Bare and Non-Bare Noun Phrases

ERIC Educational Resources Information Center

Chang, Hsiang-Hua

2011-01-01

Children's production of bare nominals is universal. When acquiring languages disallowing bare nominals, children will develop from the bare to the non-bare stage. However, Mandarin nominals may appear bare or non-bare in various positions with all kinds of interpretations. This dissertation conducts two acquisition studies to examine the…

TriBITS lifecycle model. Version 1.0, a lean/agile software lifecycle model for research-based computational science and engineering and applied mathematical software.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willenbring, James M.; Bartlett, Roscoe Ainsworth; Heroux, Michael Allen

2012-01-01

Software lifecycles are becoming an increasingly important issue for computational science and engineering (CSE) software. The process by which a piece of CSE software begins life as a set of research requirements and then matures into a trusted high-quality capability is both commonplace and extremely challenging. Although an implicit lifecycle is obviously being used in any effort, the challenges of this process - respecting the competing needs of research vs. production - cannot be overstated. Here we describe a proposal for a well-defined software lifecycle process based on modern Lean/Agile software engineering principles. What we propose is appropriate for manymore » CSE software projects that are initially heavily focused on research but also are expected to eventually produce usable high-quality capabilities. The model is related to TriBITS, a build, integration and testing system, which serves as a strong foundation for this lifecycle model, and aspects of this lifecycle model are ingrained in the TriBITS system. Here, we advocate three to four phases or maturity levels that address the appropriate handling of many issues associated with the transition from research to production software. The goals of this lifecycle model are to better communicate maturity levels with customers and to help to identify and promote Software Engineering (SE) practices that will help to improve productivity and produce better software. An important collection of software in this domain is Trilinos, which is used as the motivation and the initial target for this lifecycle model. However, many other related and similar CSE (and non-CSE) software projects can also make good use of this lifecycle model, especially those that use the TriBITS system. Indeed this lifecycle process, if followed, will enable large-scale sustainable integration of many complex CSE software efforts across several institutions.« less

An evaluation of the feasibility and usability of a proof of concept mobile app for adverse event reporting post influenza vaccination

PubMed Central

Wilson, Kumanan; Atkinson, Katherine M.; Westeinde, Jacqueline; Bell, Cameron; Marty, Kim; Fergusson, Dean; Deeks, Shelley L.; Crowcroft, Natasha; Bettinger, Julie A.

2016-01-01

ABSTRACT The Canadian National Vaccine Safety network (CANVAS) gathers and analyzes safety data on individuals receiving the influenza vaccine during the early stages of annual influenza vaccination campaigns with data collected via participant surveys through the Internet. We sought to examine whether it was feasible to use a mobile application (app) to facilitate AEFI reporting for the CANVAS network. To explore this, we developed a novel smartphone app, recruited participants from a hospital influenza immunization clinic and by word of mouth and instructed them to download and utilize the app. The app reminded participants to complete the CANVAS AEFI surveillance surveys (“AEFI surveys”) on day 8 and 30, a survey capturing app usability metrics at day 30 (“usability survey”) and provided a mechanism to report AEFI events spontaneously throughout the whole study period. All survey results and spontaneous reports were recorded on a privacy compliant, cloud server. A software plug-in, Lookback, was used to record the on-screen experience of the app sessions. Of the 76 participants who consented to participate, 48(63%) successfully downloaded the app and created a profile. In total, 38 unique participants completed all of the required surveillance surveys; transmitting 1104 data points (survey question responses and spontaneous reports) from 83 completed surveys, including 21 usability surveys and one spontaneous report. In total, we received information on new or worsening health conditions after receiving the influenza vaccine from 11(28%) participants. Of the usability survey responses, 86% agreed or strongly agreed that they would prefer to use a mobile app based reporting system instead of a web-based system. The single spontaneous report received was from a participant who had also reported using the Day 8 survey. Of Lookback observable sessions, an accurate transmission proportion of 100% (n=290) was reported for data points. We demonstrated that a mobile app can be used for AEFI reporting, although download and survey completion proportions suggest potential barriers to adoption. Future studies should examine implementation of mobile reporting in a broader audience and impact on the quality of reporting of adverse events following immunization. PMID:26905396

An evaluation of the feasibility and usability of a proof of concept mobile app for adverse event reporting post influenza vaccination.

PubMed

Wilson, Kumanan; Atkinson, Katherine M; Westeinde, Jacqueline; Bell, Cameron; Marty, Kim; Fergusson, Dean; Deeks, Shelley L; Crowcroft, Natasha; Bettinger, Julie A

2016-07-02

The Canadian National Vaccine Safety network (CANVAS) gathers and analyzes safety data on individuals receiving the influenza vaccine during the early stages of annual influenza vaccination campaigns with data collected via participant surveys through the Internet. We sought to examine whether it was feasible to use a mobile application (app) to facilitate AEFI reporting for the CANVAS network. To explore this, we developed a novel smartphone app, recruited participants from a hospital influenza immunization clinic and by word of mouth and instructed them to download and utilize the app. The app reminded participants to complete the CANVAS AEFI surveillance surveys ("AEFI surveys") on day 8 and 30, a survey capturing app usability metrics at day 30 ("usability survey") and provided a mechanism to report AEFI events spontaneously throughout the whole study period. All survey results and spontaneous reports were recorded on a privacy compliant, cloud server. A software plug-in, Lookback, was used to record the on-screen experience of the app sessions. Of the 76 participants who consented to participate, 48(63%) successfully downloaded the app and created a profile. In total, 38 unique participants completed all of the required surveillance surveys; transmitting 1104 data points (survey question responses and spontaneous reports) from 83 completed surveys, including 21 usability surveys and one spontaneous report. In total, we received information on new or worsening health conditions after receiving the influenza vaccine from 11(28%) participants. Of the usability survey responses, 86% agreed or strongly agreed that they would prefer to use a mobile app based reporting system instead of a web-based system. The single spontaneous report received was from a participant who had also reported using the Day 8 survey. Of Lookback observable sessions, an accurate transmission proportion of 100% (n=290) was reported for data points. We demonstrated that a mobile app can be used for AEFI reporting, although download and survey completion proportions suggest potential barriers to adoption. Future studies should examine implementation of mobile reporting in a broader audience and impact on the quality of reporting of adverse events following immunization.

A Formative Evaluation of CU-SeeMe.

DTIC Science & Technology

1995-02-01

CU- SeeMe is a video conferencing software package that was designed and programmed at Cornell University. The program works with the TCP/IP network...protocol and allows two or more parties to conduct a real-time video conference with full audio support. In this paper we evaluate CU- SeeMe through...caused the problem and why This helps in the process of formulating solutions for observed usability problems. All the testing results are combined in the Appendix in an illustrated partial redesign of the CU- SeeMe Interface.

Chemistry in Bioinformatics

PubMed Central

Murray-Rust, Peter; Mitchell, John BO; Rzepa, Henry S

2005-01-01

Chemical information is now seen as critical for most areas of life sciences. But unlike Bioinformatics, where data is openly available and freely re-usable, most chemical information is closed and cannot be re-distributed without permission. This has led to a failure to adopt modern informatics and software techniques and therefore paucity of chemistry in bioinformatics. New technology, however, offers the hope of making chemical data (compounds and properties) free during the authoring process. We argue that the technology is already available; we require a collective agreement to enhance publication protocols. PMID:15941476

Montana geoenvironmental explorer

USGS Publications Warehouse

Lee, Greg K.

2001-01-01

This report is the result of a multidisciplinary effort to assess relative potential for acidic, metal-rich drainage in the State of Montana; evaluate alternative GIS-based modeling strategies; and provide the statewide digital spatial data produced and compiled for the project. The CD is usable on various computer systems (Windows 95, 98, NT, and 2000; MacOS 7.1 or later; many versions of UNIX and Linux; and OS/2). This report and maps are in PDF format, and the data have been provided in various GIS formats. Software for viewing the report and data is included.

Human-Computer Interaction in Tactical Operations: Designing for Effective Human-Computer Dialogue

DTIC Science & Technology

1990-09-01

developing re-usable interface software. Furthermore, steps can be taken toward standardization, and the specifier may be able to take on an increased...The semantic level deals with the meaning of the dialogue to the user. The user has a "point of view" or a " mental model" which provides a context for...information may not occur. As shown in Figure 3-4, the user’s mental model is termed the USER MODEL (Norman and Draper, 1986, p. 47). The programmer’s

Mobile medical visual information retrieval.

PubMed

Depeursinge, Adrien; Duc, Samuel; Eggel, Ivan; Müller, Henning

2012-01-01

In this paper, we propose mobile access to peer-reviewed medical information based on textual search and content-based visual image retrieval. Web-based interfaces designed for limited screen space were developed to query via web services a medical information retrieval engine optimizing the amount of data to be transferred in wireless form. Visual and textual retrieval engines with state-of-the-art performance were integrated. Results obtained show a good usability of the software. Future use in clinical environments has the potential of increasing quality of patient care through bedside access to the medical literature in context.

Advances in Human-Computer Interaction: Graphics and Animation Components for Interface Design

NASA Astrophysics Data System (ADS)

Cipolla Ficarra, Francisco V.; Nicol, Emma; Cipolla-Ficarra, Miguel; Richardson, Lucy

We present an analysis of communicability methodology in graphics and animation components for interface design, called CAN (Communicability, Acceptability and Novelty). This methodology has been under development between 2005 and 2010, obtaining excellent results in cultural heritage, education and microcomputing contexts. In studies where there is a bi-directional interrelation between ergonomics, usability, user-centered design, software quality and the human-computer interaction. We also present the heuristic results about iconography and layout design in blogs and websites of the following countries: Spain, Italy, Portugal and France.

CliniSpace: a multiperson 3D online immersive training environment accessible through a browser.

PubMed

Dev, Parvati; Heinrichs, W LeRoy; Youngblood, Patricia

2011-01-01

Immersive online medical environments, with dynamic virtual patients, have been shown to be effective for scenario-based learning (1). However, ease of use and ease of access have been barriers to their use. We used feedback from prior evaluation of these projects to design and develop CliniSpace. To improve usability, we retained the richness of prior virtual environments but modified the user interface. To improve access, we used a Software-as-a-Service (SaaS) approach to present a richly immersive 3D environment within a web browser.

A Clinical Reasoning Tool for Virtual Patients: Design-Based Research Study.

PubMed

Hege, Inga; Kononowicz, Andrzej A; Adler, Martin

2017-11-02

Clinical reasoning is a fundamental process medical students have to learn during and after medical school. Virtual patients (VP) are a technology-enhanced learning method to teach clinical reasoning. However, VP systems do not exploit their full potential concerning the clinical reasoning process; for example, most systems focus on the outcome and less on the process of clinical reasoning. Keeping our concept grounded in a former qualitative study, we aimed to design and implement a tool to enhance VPs with activities and feedback, which specifically foster the acquisition of clinical reasoning skills. We designed the tool by translating elements of a conceptual clinical reasoning learning framework into software requirements. The resulting clinical reasoning tool enables learners to build their patient's illness script as a concept map when they are working on a VP scenario. The student's map is compared with the experts' reasoning at each stage of the VP, which is technically enabled by using Medical Subject Headings, which is a comprehensive controlled vocabulary published by the US National Library of Medicine. The tool is implemented using Web technologies, has an open architecture that enables its integration into various systems through an open application program interface, and is available under a Massachusetts Institute of Technology license. We conducted usability tests following a think-aloud protocol and a pilot field study with maps created by 64 medical students. The results show that learners interact with the tool but create less nodes and connections in the concept map than an expert. Further research and usability tests are required to analyze the reasons. The presented tool is a versatile, systematically developed software component that specifically supports the clinical reasoning skills acquisition. It can be plugged into VP systems or used as stand-alone software in other teaching scenarios. The modular design allows an extension with new feedback mechanisms and learning analytics algorithms. ©Inga Hege, Andrzej A Kononowicz, Martin Adler. Originally published in JMIR Medical Education (http://mededu.jmir.org), 02.11.2017.

Software to Control and Monitor Gas Streams

NASA Technical Reports Server (NTRS)

Arkin, C.; Curley, Charles; Gore, Eric; Floyd, David; Lucas, Damion

2012-01-01

This software package interfaces with various gas stream devices such as pressure transducers, flow meters, flow controllers, valves, and analyzers such as a mass spectrometer. The software provides excellent user interfacing with various windows that provide time-domain graphs, valve state buttons, priority- colored messages, and warning icons. The user can configure the software to save as much or as little data as needed to a comma-delimited file. The software also includes an intuitive scripting language for automated processing. The configuration allows for the assignment of measured values or calibration so that raw signals can be viewed as usable pressures, flows, or concentrations in real time. The software is based on those used in two safety systems for shuttle processing and one volcanic gas analysis system. Mass analyzers typically have very unique applications and vary from job to job. As such, software available on the market is usually inadequate or targeted on a specific application (such as EPA methods). The goal was to develop powerful software that could be used with prototype systems. The key problem was to generalize the software to be easily and quickly reconfigurable. At Kennedy Space Center (KSC), the prior art consists of two primary methods. The first method was to utilize Lab- VIEW and a commercial data acquisition system. This method required rewriting code for each different application and only provided raw data. To obtain data in engineering units, manual calculations were required. The second method was to utilize one of the embedded computer systems developed for another system. This second method had the benefit of providing data in engineering units, but was limited in the number of control parameters.

The Computational Infrastructure for Geodynamics as a Community of Practice

NASA Astrophysics Data System (ADS)

Hwang, L.; Kellogg, L. H.

2016-12-01

Computational Infrastructure for Geodynamics (CIG), geodynamics.org, originated in 2005 out of community recognition that the efforts of individual or small groups of researchers to develop scientifically-sound software is impossible to sustain, duplicates effort, and makes it difficult for scientists to adopt state-of-the art computational methods that promote new discovery. As a community of practice, participants in CIG share an interest in computational modeling in geodynamics and work together on open source software to build the capacity to support complex, extensible, scalable, interoperable, reliable, and reusable software in an effort to increase the return on investment in scientific software development and increase the quality of the resulting software. The group interacts regularly to learn from each other and better their practices formally through webinar series, workshops, and tutorials and informally through listservs and hackathons. Over the past decade, we have learned that successful scientific software development requires at a minimum: collaboration between domain-expert researchers, software developers and computational scientists; clearly identified and committed lead developer(s); well-defined scientific and computational goals that are regularly evaluated and updated; well-defined benchmarks and testing throughout development; attention throughout development to usability and extensibility; understanding and evaluation of the complexity of dependent libraries; and managed user expectations through education, training, and support. CIG's code donation standards provide the basis for recently formalized best practices in software development (geodynamics.org/cig/dev/best-practices/). Best practices include use of version control; widely used, open source software libraries; extensive test suites; portable configuration and build systems; extensive documentation internal and external to the code; and structured, human readable input formats.

Fostering successful scientific software communities

NASA Astrophysics Data System (ADS)

Bangerth, W.; Heister, T.; Hwang, L.; Kellogg, L. H.

2016-12-01

Developing sustainable open source software packages for the sciences appears at first to be primarily a technical challenge: How can one create stable and robust algorithms, appropriate software designs, sufficient documentation, quality assurance strategies such as continuous integration and test suites, or backward compatibility approaches that yield high-quality software usable not only by the authors, but also the broader community of scientists? However, our experience from almost two decades of leading the development of the deal.II software library (http://www.dealii.org, a widely-used finite element package) and the ASPECT code (http://aspect.dealii.org, used to simulate convection in the Earth's mantle) has taught us that technical aspects are not the most difficult ones in scientific open source software. Rather, it is the social challenge of building and maintaining a community of users and developers interested in answering questions on user forums, contributing code, and jointly finding solutions to common technical and non-technical challenges. These problems are posed in an environment where project leaders typically have no resources to reward the majority of contributors, where very few people are specifically paid for the work they do on the project, and with frequent turnover of contributors as project members rotate into and out of jobs. In particular, much software work is done by graduate students who may become fluent enough in a software only a year or two before they leave academia. We will discuss strategies we have found do and do not work in maintaining and growing communities around the scientific software projects we lead. Specifically, we will discuss the management style necessary to keep contributors engaged, ways to give credit where credit is due, and structuring documentation to decrease reliance on forums and thereby allow user communities to grow without straining those who answer questions.

Simplified Virtualization in a HEP/NP Environment with Condor

NASA Astrophysics Data System (ADS)

Strecker-Kellogg, W.; Caramarcu, C.; Hollowell, C.; Wong, T.

2012-12-01

In this work we will address the development of a simple prototype virtualized worker node cluster, using Scientific Linux 6.x as a base OS, KVM and the libvirt API for virtualization, and the Condor batch software to manage virtual machines. The discussion in this paper provides details on our experience with building, configuring, and deploying the various components from bare metal, including the base OS, creation and distribution of the virtualized OS images and the integration of batch services with the virtual machines. Our focus was on simplicity and interoperability with our existing architecture.

A hardware/software environment to support R D in intelligent machines and mobile robotic systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, R.C.

1990-01-01

The Center for Engineering Systems Advanced Research (CESAR) serves as a focal point at the Oak Ridge National Laboratory (ORNL) for basic and applied research in intelligent machines. R D at CESAR addresses issues related to autonomous systems, unstructured (i.e. incompletely known) operational environments, and multiple performing agents. Two mobile robot prototypes (HERMIES-IIB and HERMIES-III) are being used to test new developments in several robot component technologies. This paper briefly introduces the computing environment at CESAR which includes three hypercube concurrent computers (two on-board the mobile robots), a graphics workstation, VAX, and multiple VME-based systems (several on-board the mobile robots).more » The current software environment at CESAR is intended to satisfy several goals, e.g.: code portability, re-usability in different experimental scenarios, modularity, concurrent computer hardware transparent to applications programmer, future support for multiple mobile robots, support human-machine interface modules, and support for integration of software from other, geographically disparate laboratories with different hardware set-ups. 6 refs., 1 fig.« less

Section 3: Quality and Value-Based Requirements

NASA Astrophysics Data System (ADS)

Mylopoulos, John

Traditionally, research and practice in software engineering has focused its attention on specific software qualities, such as functionality and performance. According to this perspective, a system is deemed to be of good quality if it delivers all required functionality (“fitness-for-purpose”) and its performance is above required thresholds. Increasingly, primarily in research but also in practice, other qualities are attracting attention. To facilitate evolution, maintainability and adaptability are gaining popularity. Usability, universal accessibility, innovativeness, and enjoyability are being studied as novel types of non-functional requirements that we do not know how to define, let alone accommodate, but which we realize are critical under some contingencies. The growing importance of the business context in the design of software-intensive systems has also thrust economic value, legal compliance, and potential social and ethical implications into the forefront of requirements topics. A focus on the broader user environment and experience, as well as the organizational and societal implications of system use, thus has become more central to the requirements discourse. This section includes three contributions to this broad and increasingly important topic.

YBYRÁ facilitates comparison of large phylogenetic trees.

PubMed

Machado, Denis Jacob

2015-07-01

The number and size of tree topologies that are being compared by phylogenetic systematists is increasing due to technological advancements in high-throughput DNA sequencing. However, we still lack tools to facilitate comparison among phylogenetic trees with a large number of terminals. The "YBYRÁ" project integrates software solutions for data analysis in phylogenetics. It comprises tools for (1) topological distance calculation based on the number of shared splits or clades, (2) sensitivity analysis and automatic generation of sensitivity plots and (3) clade diagnoses based on different categories of synapomorphies. YBYRÁ also provides (4) an original framework to facilitate the search for potential rogue taxa based on how much they affect average matching split distances (using MSdist). YBYRÁ facilitates comparison of large phylogenetic trees and outperforms competing software in terms of usability and time efficiency, specially for large data sets. The programs that comprises this toolkit are written in Python, hence they do not require installation and have minimum dependencies. The entire project is available under an open-source licence at http://www.ib.usp.br/grant/anfibios/researchSoftware.html .

Concierge: Personal Database Software for Managing Digital Research Resources

PubMed Central

Sakai, Hiroyuki; Aoyama, Toshihiro; Yamaji, Kazutsuna; Usui, Shiro

2007-01-01

This article introduces a desktop application, named Concierge, for managing personal digital research resources. Using simple operations, it enables storage of various types of files and indexes them based on content descriptions. A key feature of the software is a high level of extensibility. By installing optional plug-ins, users can customize and extend the usability of the software based on their needs. In this paper, we also introduce a few optional plug-ins: literature management, electronic laboratory notebook, and XooNlps client plug-ins. XooNIps is a content management system developed to share digital research resources among neuroscience communities. It has been adopted as the standard database system in Japanese neuroinformatics projects. Concierge, therefore, offers comprehensive support from management of personal digital research resources to their sharing in open-access neuroinformatics databases such as XooNIps. This interaction between personal and open-access neuroinformatics databases is expected to enhance the dissemination of digital research resources. Concierge is developed as an open source project; Mac OS X and Windows XP versions have been released at the official site (http://concierge.sourceforge.jp). PMID:18974800

Setup and use of a two-laser multiphoton microscope for multichannel intravital fluorescence imaging

PubMed Central

Entenberg, David; Wyckoff, Jeffrey; Gligorijevic, Bojana; Roussos, Evanthia T; Verkhusha, Vladislav V; Pollard, Jeffrey W; Condeelis, John

2014-01-01

Characterizing biological mechanisms dependent upon the interaction of many cell types in vivo requires both multiphoton microscope systems capable of expanding the number and types of fluorophores that can be imaged simultaneously while removing the wavelength and tunability restrictions of existing systems, and enhanced software for extracting critical cellular parameters from voluminous 4D data sets. We present a procedure for constructing a two-laser multiphoton microscope that extends the wavelength range of excitation light, expands the number of simultaneously usable fluorophores and markedly increases signal to noise via ‘over-clocking’ of detection. We also utilize a custom-written software plug-in that simplifies the quantitative tracking and analysis of 4D intravital image data. We begin by describing the optics, hardware, electronics and software required, and finally the use of the plug-in for analysis. We demonstrate the use of the setup and plug-in by presenting data collected via intravital imaging of a mouse model of breast cancer. The procedure may be completed in ~24 h. PMID:21959234

Usability-driven evolution of a space instrument

NASA Astrophysics Data System (ADS)

McCalden, Alec

2012-09-01

The use of resources in the cradle-to-grave timeline of a space instrument might be significantly improved by considering the concept of usability from the start of the mission. The methodology proposed here includes giving early priority in a programme to the iterative development of a simulator that models instrument operation, and allowing this to evolve ahead of the actual instrument specification and fabrication. The advantages include reduction of risk in software development by shifting much of it to earlier in a programme than is typical, plus a test programme that uses and thereby proves the same support systems that may be used for flight. A new development flow for an instrument is suggested, showing how the system engineering phases used by the space agencies could be reworked in line with these ideas. This methodology is also likely to contribute to a better understanding between the various disciplines involved in the creation of a new instrument. The result should better capture the science needs, implement them more accurately with less wasted effort, and more fully allow the best ideas from all team members to be considered.

NASA GTE TRACE-P Augmentation

NASA Technical Reports Server (NTRS)

Sandholm, Scott; Conners, Vickie (Technical Monitor)

2005-01-01

There were three major tasks and objectives that the Tropospheric Trace Gas and Airborne Measurement Group's (TTGAMG) worked on for different aspects of this grant: 1) Migrate the data acquisition system from HP-UX to Linux, thus reducing future costs as the result of software and operating system (OS) upgrades and improving upon usability as membership in the group changes; 2) Rework the Optical Parametric Oscillator (OPO) cavities. These are the OPOs that are integral to the Georgia Institute of Technology Airborne Laser Induced Fluorescent Experiment (GITALIFE) that the TTGAMG flew on TRACE-P. The objective was to improve upon optimizing the pump laser energy and narrowing the linewidth of the UV wavelength generated by the OPOs; 3) Improve and expand the interactive website on http://tmbk2.eas.gatech.edu by adding 3-D graphing, improve the response time for Joe Surfer Dude, improve performance, usability, and expand the database. If I were to assign a letter grade to each of the above tasks, I would give the TTGAMG two Bs and an A to the tasks listed above.

Visualizing and communicating uncertainty in the earth and environmental sciences: a review

NASA Astrophysics Data System (ADS)

Pebesma, Edzer

2014-05-01

I will review past attempts to visualising uncertainty in spatial or spatio-temporal predictions of groundwater quality, quality predictions, sea bed sediment, bird densities, air quality measurements, and exposure to air quality of individuals and populations. The attempts involved software development (aguila [1], greenland [2]), the development of standards for communicating uncertain spatial and spatio-temporal information (UncertML, [3]), and have been illustrated by applications in a number of EU projects (Apmosphere [4], INTAMAP [5], UncertWeb [6] and GeoViQua [7]). I will also report on usability studies that were carried out (e.g. [8]). [1] http://pcraster.geo.uu.nl/projects/developments/aguila/ [2] https://wiki.52north.org/bin/view/Geostatistics/Greenland [3] http://www.uncertml.org/ [4] http://www.apmosphere.org/ [5] http://www.intamap.org/ [6] http://www.uncertweb.org/ [7] http://www.geoviqua.org/ [8] Senaratne, H. L. Gerharz, E. Pebesma, A. Schwering, 2012. Usability of Spatio-Temporal Uncertainty Visualisation Methods. In: Bridging the Geographic Information Sciences, Lecture Notes in Geoinformation and Cartography, J. Gensel, D. Josselin and D. Vandenbroucke. Springer Berlin Heidelberg.

Development, deployment and usability of a point-of-care decision support system for chronic disease management using the recently-approved HL7 decision support service standard.

PubMed

Lobach, David F; Kawamoto, Kensaku; Anstrom, Kevin J; Russell, Michael L; Woods, Peter; Smith, Dwight

2007-01-01

Clinical decision support is recognized as one potential remedy for the growing crisis in healthcare quality in the United States and other industrialized nations. While decision support systems have been shown to improve care quality and reduce errors, these systems are not widely available. This lack of availability arises in part because most decision support systems are not portable or scalable. The Health Level 7 international standard development organization recently adopted a draft standard known as the Decision Support Service standard to facilitate the implementation of clinical decision support systems using software services. In this paper, we report the first implementation of a clinical decision support system using this new standard. This system provides point-of-care chronic disease management for diabetes and other conditions and is deployed throughout a large regional health system. We also report process measures and usability data concerning the system. Use of the Decision Support Service standard provides a portable and scalable approach to clinical decision support that could facilitate the more extensive use of decision support systems.

ImatraNMR: Novel software for batch integration and analysis of quantitative NMR spectra

NASA Astrophysics Data System (ADS)

Mäkelä, A. V.; Heikkilä, O.; Kilpeläinen, I.; Heikkinen, S.

2011-08-01

Quantitative NMR spectroscopy is a useful and important tool for analysis of various mixtures. Recently, in addition of traditional quantitative 1D 1H and 13C NMR methods, a variety of pulse sequences aimed for quantitative or semiquantitative analysis have been developed. To obtain actual usable results from quantitative spectra, they must be processed and analyzed with suitable software. Currently, there are many processing packages available from spectrometer manufacturers and third party developers, and most of them are capable of analyzing and integration of quantitative spectra. However, they are mainly aimed for processing single or few spectra, and are slow and difficult to use when large numbers of spectra and signals are being analyzed, even when using pre-saved integration areas or custom scripting features. In this article, we present a novel software, ImatraNMR, designed for batch analysis of quantitative spectra. In addition to capability of analyzing large number of spectra, it provides results in text and CSV formats, allowing further data-analysis using spreadsheet programs or general analysis programs, such as Matlab. The software is written with Java, and thus it should run in any platform capable of providing Java Runtime Environment version 1.6 or newer, however, currently it has only been tested with Windows and Linux (Ubuntu 10.04). The software is free for non-commercial use, and is provided with source code upon request.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bocci, Valerio; Chiodi, Giacomo; Iacoangeli, Francesco

The necessity to use Photo Multipliers (PM) as light detector limited in the past the use of crystals in radiation handled device preferring the Geiger approach. The Silicon Photomultipliers (SiPMs) are very small and cheap, solid photon detectors with good dynamic range and single photon detection capability, they are usable to supersede cumbersome and difficult to use Photo Multipliers (PM). A SiPM can be coupled with a scintillator crystal to build efficient, small and solid radiation detector. A cost effective and easily replicable Hardware software module for SiPM detector readout is made using the ArduSiPM solution. The ArduSiPM is anmore » easily battery operable handled device using an Arduino DUE (an open Software/Hardware board) as processor board and a piggy-back custom designed board (ArduSiPM Shield), the Shield contains all the blocks features to monitor, set and acquire the SiPM using internet network. (authors)« less

Computer Administered Safety Planning for Individuals at Risk for Suicide: Development and Usability Testing.

PubMed

Boudreaux, Edwin D; Brown, Gregory K; Stanley, Barbara; Sadasivam, Rajani S; Camargo, Carlos A; Miller, Ivan W

2017-05-15

Safety planning is a brief intervention that has become an accepted practice in many clinical settings to help prevent suicide. Even though it is quick compared to other approaches, it frequently requires 20 min or more to complete, which can impede adoption. A self-administered, Web-based safety planning application could potentially reduce clinician time, help promote standardization and quality, and provide enhanced ability to share the created plan. The aim of this study was to design, build, and test the usability of a Web-based, self-administered safety planning application. We employed a user-centered software design strategy led by a multidisciplinary team. The application was tested for usability with a target sample of suicidal patients. Detailed observations, structured usability ratings, and Think Aloud procedures were used. Suicidal ideation intensity and perceived ability to cope were assessed pre-post engagement with the Web application. A total of 30 participants were enrolled. Usability ratings were generally strong, and all patients successfully built a safety plan. However, the completeness of the safety plan varied. The mean number of steps completed was 5.5 (SD 0.9) out of 6, with 90% (27/30) of participants completing at least 5 steps and 67% (20/30) completing all 6 steps. Some safety planning steps were viewed as inapplicable to some individuals. Some confusion in instructions led to modifications to improve understandability of each step. Ratings of suicide intensity after completion of the application were significantly lower than preratings, pre: mean 5.11 (SD 2.9) versus post: mean 4.46 (SD 3.0), t 27 =2.49, P=.02. Ratings of ability to cope with suicidal thoughts after completion of the application were higher than preratings, with the difference approaching statistical significance, pre: mean 5.93 (SD 2.9), post: mean 6.64 (SD 2.4), t 27 =-2.03, P=.05. We have taken the first step toward identifying the components needed to maximize usability of a self-administered, Web-based safety planning application. Results support initial consideration of the application as an adjunct to clinical contact. This allows for the clinician or other personnel to provide clarification, when needed, to help the patient build the plan, and to help review and revise the draft. ©Edwin D Boudreaux, Gregory K Brown, Barbara Stanley, Rajani S Sadasivam, Carlos A Camargo Jr, Ivan W Miller. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 15.05.2017.

Evaluating the Usability and Usefulness of a Mobile App for Atrial Fibrillation Using Qualitative Methods: Exploratory Pilot Study.

PubMed

Hirschey, Jaclyn; Bane, Sunetra; Mansour, Moussa; Sperber, Jodi; Agboola, Stephen; Kvedar, Joseph; Jethwani, Kamal

2018-03-15

Atrial fibrillation (AFib) is the most common form of heart arrhythmia and a potent risk factor for stroke. Nonvitamin K antagonist oral anticoagulants (NOACs) are routinely prescribed to manage AFib stroke risk; however, nonadherence to treatment is a concern. Additional tools that support self-care and medication adherence may benefit patients with AFib. The aim of this study was to evaluate the perceived usability and usefulness of a mobile app designed to support self-care and treatment adherence for AFib patients who are prescribed NOACs. A mobile app to support AFib patients was previously developed based on early stage interview and usability test data from clinicians and patients. An exploratory pilot study consisting of naturalistic app use, surveys, and semistructured interviews was then conducted to examine patients' perceptions and everyday use of the app. A total of 12 individuals with an existing diagnosis of nonvalvular AFib completed the 4-week study. The average age of participants was 59 years. All participants somewhat or strongly agreed that the app was easy to use, and 92% (11/12) reported being satisfied or very satisfied with the app. Participant feedback identified changes that may improve app usability and usefulness for patients with AFib. Areas of usability improvement were organized by three themes: app navigation, clarity of app instructions and design intent, and software bugs. Perceptions of app usefulness were grouped by three key variables: core needs of the patient segment, patient workflow while managing AFib, and the app's ability to support the patient's evolving needs. The results of this study suggest that mobile tools that target self-care and treatment adherence may be helpful to AFib patients, particularly those who are newly diagnosed. Additionally, participant feedback provided insight into the varied needs and health experiences of AFib patients, which may improve the design and targeting of the intervention. Pilot studies that qualitatively examine patient perceptions of usability and usefulness are a valuable and often underutilized method for assessing the real-world acceptability of an intervention. Additional research evaluating the AFib Connect mobile app over a longer period, and including a larger, more diverse sample of AFib patients, will be helpful for understanding whether the app is perceived more broadly to be useful and effective in supporting patient self-care and medication adherence. ©Jaclyn Hirschey, Sunetra Bane, Moussa Mansour, Jodi Sperber, Stephen Agboola, Joseph Kvedar, Kamal Jethwani. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 15.03.2018.

Rate and Gain Limitations of MSGC's and MGC's Combined with GEM and other Preamplification Structures

NASA Technical Reports Server (NTRS)

Fonte, P.; Peskov, V.; Ramsey, B. D.

1998-01-01

We have studied the rate and gain limits of diamond-coated Microstrip Gas Counters (MSGC's) and Micro-Gap Counters (MGC's) when combined with various preamplification structures: Gas Electron Multiplier (GEM), Parallel-Plate Avalanche Chamber (PPAC) or a MICROMEGAS-type structure. Measurements were done both with X rays and alpha particles with various detector geometries and in different gas mixtures at pressures from 0.05 to 10 atm. The results obtained varied significantly with detector design, gas mixture and pressure, but some general features can be identified. We found that in all cases, bare MSGC'S, MGC'S, PPAC's and MICROMEGAS, the maximum achievable gain drops with rate. The addition of preamplification structures significantly increases the gain of MSGC's and MGC'S, but this gain is still rate dependent. There would seem to be a general rate-dependent effect governing the usable gain of all these detectors. We speculate on possible mechanisms for this effect, and identify a safe, spark-free, operation zone for each system (detector + preamplification structure) in the rate-gain coordinate plane.

ValWorkBench: an open source Java library for cluster validation, with applications to microarray data analysis.

PubMed

Giancarlo, R; Scaturro, D; Utro, F

2015-02-01

The prediction of the number of clusters in a dataset, in particular microarrays, is a fundamental task in biological data analysis, usually performed via validation measures. Unfortunately, it has received very little attention and in fact there is a growing need for software tools/libraries dedicated to it. Here we present ValWorkBench, a software library consisting of eleven well known validation measures, together with novel heuristic approximations for some of them. The main objective of this paper is to provide the interested researcher with the full software documentation of an open source cluster validation platform having the main features of being easily extendible in a homogeneous way and of offering software components that can be readily re-used. Consequently, the focus of the presentation is on the architecture of the library, since it provides an essential map that can be used to access the full software documentation, which is available at the supplementary material website [1]. The mentioned main features of ValWorkBench are also discussed and exemplified, with emphasis on software abstraction design and re-usability. A comparison with existing cluster validation software libraries, mainly in terms of the mentioned features, is also offered. It suggests that ValWorkBench is a much needed contribution to the microarray software development/algorithm engineering community. For completeness, it is important to mention that previous accurate algorithmic experimental analysis of the relative merits of each of the implemented measures [19,23,25], carried out specifically on microarray data, gives useful insights on the effectiveness of ValWorkBench for cluster validation to researchers in the microarray community interested in its use for the mentioned task. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Ease of adoption of clinical natural language processing software: An evaluation of five systems.

PubMed

Zheng, Kai; Vydiswaran, V G Vinod; Liu, Yang; Wang, Yue; Stubbs, Amber; Uzuner, Özlem; Gururaj, Anupama E; Bayer, Samuel; Aberdeen, John; Rumshisky, Anna; Pakhomov, Serguei; Liu, Hongfang; Xu, Hua

2015-12-01

In recognition of potential barriers that may inhibit the widespread adoption of biomedical software, the 2014 i2b2 Challenge introduced a special track, Track 3 - Software Usability Assessment, in order to develop a better understanding of the adoption issues that might be associated with the state-of-the-art clinical NLP systems. This paper reports the ease of adoption assessment methods we developed for this track, and the results of evaluating five clinical NLP system submissions. A team of human evaluators performed a series of scripted adoptability test tasks with each of the participating systems. The evaluation team consisted of four "expert evaluators" with training in computer science, and eight "end user evaluators" with mixed backgrounds in medicine, nursing, pharmacy, and health informatics. We assessed how easy it is to adopt the submitted systems along the following three dimensions: communication effectiveness (i.e., how effective a system is in communicating its designed objectives to intended audience), effort required to install, and effort required to use. We used a formal software usability testing tool, TURF, to record the evaluators' interactions with the systems and 'think-aloud' data revealing their thought processes when installing and using the systems and when resolving unexpected issues. Overall, the ease of adoption ratings that the five systems received are unsatisfactory. Installation of some of the systems proved to be rather difficult, and some systems failed to adequately communicate their designed objectives to intended adopters. Further, the average ratings provided by the end user evaluators on ease of use and ease of interpreting output are -0.35 and -0.53, respectively, indicating that this group of users generally deemed the systems extremely difficult to work with. While the ratings provided by the expert evaluators are higher, 0.6 and 0.45, respectively, these ratings are still low indicating that they also experienced considerable struggles. The results of the Track 3 evaluation show that the adoptability of the five participating clinical NLP systems has a great margin for improvement. Remedy strategies suggested by the evaluators included (1) more detailed and operation system specific use instructions; (2) provision of more pertinent onscreen feedback for easier diagnosis of problems; (3) including screen walk-throughs in use instructions so users know what to expect and what might have gone wrong; (4) avoiding jargon and acronyms in materials intended for end users; and (5) packaging prerequisites required within software distributions so that prospective adopters of the software do not have to obtain each of the third-party components on their own. Copyright © 2015 Elsevier Inc. All rights reserved.

Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

NASA Technical Reports Server (NTRS)

Greene, Kevin; Grenander, Sven; Kurien, James; z,s (fshir. z[orttr); z,scer; O'Reilly, Taifun

2006-01-01

Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to integrate existing mission applications for sequence development, sequence validation, and high level activity planning, and other functions into a component-based environment. For each of these, we used a somewhat different technique based upon the structure and usage of the existing application.

From users involvement to users' needs understanding: a case study.

PubMed

Niès, Julie; Pelayo, Sylvia

2010-04-01

Companies developing and commercializing Healthcare IT applications may decide to involve the users in the software development lifecycle in order to better understand the users' needs and to optimize their products. Unfortunately direct developers-users dialogues are not sufficient to ensure a proper understanding of the users' needs. It is also necessary to involve human factors specialists to analyze the users' expression of their needs and to properly formalize the requirements for design purposes. The objective of this paper is to present a case study reporting the collaborative work between HF experts and a company developing and commercializing a CPOE. This study shows how this collaboration helps resolve the limits of direct users involvement and usual problems pertaining to users' needs description and understanding. The company participating in the study has implemented a procedure to convene regular meetings allowing direct exchanges between the development team and users' representatives. Those meetings aim at getting users' feedbacks on the existing products and at validating further developments. In parallel with usual HF methods supporting the analysis of the work system (onsite observations followed by debriefing interviews) and the usability evaluation of the application (usability inspection and usability tests), HF experts took the opportunity of the meetings organized by the company to collect, re-interpret and re-formulate the needs expressed by the users. The developers perceive the physicians' requirements concerning the display of the patient's list of medication as contradictory. In a previous meeting round the users had required a detailed view of the medication list against the synthesized existing one. Once this requirement satisfied, the users participating in the current meeting round require a synthesized view against the existing detailed one. The development team is unable to understand what they perceive as a reverse claim. Relying on a cognitive analysis of the physicians' decision making concerning the patient's treatment, the HF experts help re-formulate the physicians' cognitive needs in terms of synthesized/detailed display of the medication list depending on the stage of the decision making process. This led to an astute re-engineering of the application allowing the physicians to easily navigate back and forth between the synthesized and detailed views depending on the progress of their decision making. This study demonstrates that the integration of users' representatives in the software lifecycle is a good point for the end users. But it remains insufficient to resolve the complex usability problems of the system. Such solutions require the integration of HF expertise. Moreover, such an involvement of HF experts may generate benefits in terms of reduction of (i) the number of iterative developments and (ii) the users' training costs. (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Designing Real-time Decision Support for Trauma Resuscitations

PubMed Central

Yadav, Kabir; Chamberlain, James M.; Lewis, Vicki R.; Abts, Natalie; Chawla, Shawn; Hernandez, Angie; Johnson, Justin; Tuveson, Genevieve; Burd, Randall S.

2016-01-01

Background Use of electronic clinical decision support (eCDS) has been recommended to improve implementation of clinical decision rules. Many eCDS tools, however, are designed and implemented without taking into account the context in which clinical work is performed. Implementation of the pediatric traumatic brain injury (TBI) clinical decision rule at one Level I pediatric emergency department includes an electronic questionnaire triggered when ordering a head computed tomography using computerized physician order entry (CPOE). Providers use this CPOE tool in less than 20% of trauma resuscitation cases. A human factors engineering approach could identify the implementation barriers that are limiting the use of this tool. Objectives The objective was to design a pediatric TBI eCDS tool for trauma resuscitation using a human factors approach. The hypothesis was that clinical experts will rate a usability-enhanced eCDS tool better than the existing CPOE tool for user interface design and suitability for clinical use. Methods This mixed-methods study followed usability evaluation principles. Pediatric emergency physicians were surveyed to identify barriers to using the existing eCDS tool. Using standard trauma resuscitation protocols, a hierarchical task analysis of pediatric TBI evaluation was developed. Five clinical experts, all board-certified pediatric emergency medicine faculty members, then iteratively modified the hierarchical task analysis until reaching consensus. The software team developed a prototype eCDS display using the hierarchical task analysis. Three human factors engineers provided feedback on the prototype through a heuristic evaluation, and the software team refined the eCDS tool using a rapid prototyping process. The eCDS tool then underwent iterative usability evaluations by the five clinical experts using video review of 50 trauma resuscitation cases. A final eCDS tool was created based on their feedback, with content analysis of the evaluations performed to ensure all concerns were identified and addressed. Results Among 26 EPs (76% response rate), the main barriers to using the existing tool were that the information displayed is redundant and does not fit clinical workflow. After the prototype eCDS tool was developed based on the trauma resuscitation hierarchical task analysis, the human factors engineers rated it to be better than the CPOE tool for nine of 10 standard user interface design heuristics on a three-point scale. The eCDS tool was also rated better for clinical use on the same scale, in 84% of 50 expert–video pairs, and was rated equivalent in the remainder. Clinical experts also rated barriers to use of the eCDS tool as being low. Conclusions An eCDS tool for diagnostic imaging designed using human factors engineering methods has improved perceived usability among pediatric emergency physicians. PMID:26300010

The control system of the multi-strip ionization chamber for the HIMM

NASA Astrophysics Data System (ADS)

Li, Min; Yuan, Y. J.; Mao, R. S.; Xu, Z. G.; Li, Peng; Zhao, T. C.; Zhao, Z. L.; Zhang, Nong

2015-03-01

Heavy Ion Medical Machine (HIMM) is a carbon ion cancer treatment facility which is being built by the Institute of Modern Physics (IMP) in China. In this facility, transverse profile and intensity of the beam at the treatment terminals will be measured by the multi-strip ionization chamber. In order to fulfill the requirement of the beam position feedback to accomplish the beam automatic commissioning, less than 1 ms reaction time of the Data Acquisition (DAQ) of this detector must be achieved. Therefore, the control system and software framework for DAQ have been redesigned and developed with National Instruments Compact Reconfigurable Input/Output (CompactRIO) instead of PXI 6133. The software is Labview-based and developed following the producer-consumer pattern with message mechanism and queue technology. The newly designed control system has been tested with carbon beam at the Heavy Ion Research Facility at Lanzhou-Cooler Storage Ring (HIRFL-CSR) and it has provided one single beam profile measurement in less than 1 ms with 1 mm beam position resolution. The fast reaction time and high precision data processing during the beam test have verified the usability and maintainability of the software framework. Furthermore, such software architecture is easy-fitting to applications with different detectors such as wire scanner detector.

Semi-Automatic Segmentation Software for Quantitative Clinical Brain Glioblastoma Evaluation

PubMed Central

Zhu, Y; Young, G; Xue, Z; Huang, R; You, H; Setayesh, K; Hatabu, H; Cao, F; Wong, S.T.

2012-01-01

Rationale and Objectives Quantitative measurement provides essential information about disease progression and treatment response in patients with Glioblastoma multiforme (GBM). The goal of this paper is to present and validate a software pipeline for semi-automatic GBM segmentation, called AFINITI (Assisted Follow-up in NeuroImaging of Therapeutic Intervention), using clinical data from GBM patients. Materials and Methods Our software adopts the current state-of-the-art tumor segmentation algorithms and combines them into one clinically usable pipeline. Both the advantages of the traditional voxel-based and the deformable shape-based segmentation are embedded into the software pipeline. The former provides an automatic tumor segmentation scheme based on T1- and T2-weighted MR brain data, and the latter refines the segmentation results with minimal manual input. Results Twenty six clinical MR brain images of GBM patients were processed and compared with manual results. The results can be visualized using the embedded graphic user interface (GUI). Conclusion Validation results using clinical GBM data showed high correlation between the AFINITI results and manual annotation. Compared to the voxel-wise segmentation, AFINITI yielded more accurate results in segmenting the enhanced GBM from multimodality MRI data. The proposed pipeline could be used as additional information to interpret MR brain images in neuroradiology. PMID:22591720

Informatics in radiology (infoRAD): free DICOM image viewing and processing software for the Macintosh computer: what's available and what it can do for you.

PubMed

Escott, Edward J; Rubinstein, David

2004-01-01

It is often necessary for radiologists to use digital images in presentations and conferences. Most imaging modalities produce images in the Digital Imaging and Communications in Medicine (DICOM) format. The image files tend to be large and thus cannot be directly imported into most presentation software, such as Microsoft PowerPoint; the large files also consume storage space. There are many free programs that allow viewing and processing of these files on a personal computer, including conversion to more common file formats such as the Joint Photographic Experts Group (JPEG) format. Free DICOM image viewing and processing software for computers running on the Microsoft Windows operating system has already been evaluated. However, many people use the Macintosh (Apple Computer) platform, and a number of programs are available for these users. The World Wide Web was searched for free DICOM image viewing or processing software that was designed for the Macintosh platform or is written in Java and is therefore platform independent. The features of these programs and their usability were evaluated. There are many free programs for the Macintosh platform that enable viewing and processing of DICOM images. (c) RSNA, 2004.

Combining Static Model Checking with Dynamic Enforcement Using the Statecall Policy Language

NASA Astrophysics Data System (ADS)

Madhavapeddy, Anil

Internet protocols encapsulate a significant amount of state, making implementing the host software complex. In this paper, we define the Statecall Policy Language (SPL) which provides a usable middle ground between ad-hoc coding and formal reasoning. It enables programmers to embed automata in their code which can be statically model-checked using SPIN and dynamically enforced. The performance overheads are minimal, and the automata also provide higher-level debugging capabilities. We also describe some practical uses of SPL by describing the automata used in an SSH server written entirely in OCaml/SPL.

Reference System of DNA and Protein Sequences on CD-ROM

NASA Astrophysics Data System (ADS)

Nasu, Hisanori; Ito, Toshiaki

DNASIS-DBREF31 is a database for DNA and Protein sequences in the form of optical Compact Disk (CD) ROM, developed and commercialized by Hitachi Software Engineering Co., Ltd. Both nucleic acid base sequences and protein amino acid sequences can be retrieved from a single CD-ROM. Existing database is offered in the form of on-line service, floppy disks, or magnetic tape, all of which have some problems or other, such as usability or storage capacity. DNASIS-DBREF31 newly adopt a CD-ROM as a database device to realize a mass storage and personal use of the database.

Can Robots and Humans Get Along?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean

2007-06-01

Now that robots have moved into the mainstream—as vacuum cleaners, lawn mowers, autonomous vehicles, tour guides, and even pets—it is important to consider how everyday people will interact with them. A robot is really just a computer, but many researchers are beginning to understand that human-robot interactions are much different than human-computer interactions. So while the metrics used to evaluate the human-computer interaction (usability of the software interface in terms of time, accuracy, and user satisfaction) may also be appropriate for human-robot interactions, we need to determine whether there are additional metrics that should be considered.

Debunking Health IT Usability Myths

PubMed Central

Staggers, N.; Xiao, Y.; Chapman, L.

2013-01-01

Poor usability is a threat to patient safety and linked to productivity loss, workflow disruption, user frustration, sub-optimal product use and system de-installations. Although usability is receiving more attention nationally and internationally, myths about usability persist. This editorial debunks five common myths about usability (1) usability only concerns the look and feel of a product and is, therefore, only a minor concern, (2) usability is not measurable, (3) usability stifles innovation, (4) vendors are solely responsible for product usability, and (5) usability methods are not practical for use in healthcare. PMID:23874361

How do open-ended problems promote mathematical creativity? A reflection of bare mathematics problem and contextual problem

NASA Astrophysics Data System (ADS)

Wijaya, A.

2018-03-01

Creativity is often seen as one of the fundamental aspects of character education. As one of the 21st century skills, creativity has also been considered as an important goal of education across the world. This paper reports a study on promoting mathematical creativity through the use of open-ended mathematics problems. A total of 53 undergraduate students participated in the study. These students worked on open-ended problems in two types, i.e. bare mathematics problem and contextual problem. The contextual problem was presented in the form of paper-based and Geogebra-based. The students’ works were analysed qualitatively in order to describe how students’ mathematical creativity developed. It was found that the open-ended problems successfully promote students’ creativity as indicated by various solutions or strategies that were used by students to solve the problems. The analysis of students’ works show that students’ creativity developed through three kinds of exploration, i. e. (1) exploration of contexts, (2) exploration of software features, and (3) exploration of mathematics concepts. The use of metacognitive questioning was found to be helpful to develop the first two explorations into mathematical exploration.

User-Centered Evaluation of Visual Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean C.

Visual analytics systems are becoming very popular. More domains now use interactive visualizations to analyze the ever-increasing amount and heterogeneity of data. More novel visualizations are being developed for more tasks and users. We need to ensure that these systems can be evaluated to determine that they are both useful and usable. A user-centered evaluation for visual analytics needs to be developed for these systems. While many of the typical human-computer interaction (HCI) evaluation methodologies can be applied as is, others will need modification. Additionally, new functionality in visual analytics systems needs new evaluation methodologies. There is a difference betweenmore » usability evaluations and user-centered evaluations. Usability looks at the efficiency, effectiveness, and user satisfaction of users carrying out tasks with software applications. User-centered evaluation looks more specifically at the utility provided to the users by the software. This is reflected in the evaluations done and in the metrics used. In the visual analytics domain this is very challenging as users are most likely experts in a particular domain, the tasks they do are often not well defined, the software they use needs to support large amounts of different kinds of data, and often the tasks last for months. These difficulties are discussed more in the section on User-centered Evaluation. Our goal is to provide a discussion of user-centered evaluation practices for visual analytics, including existing practices that can be carried out and new methodologies and metrics that need to be developed and agreed upon by the visual analytics community. The material provided here should be of use for both researchers and practitioners in the field of visual analytics. Researchers and practitioners in HCI and interested in visual analytics will find this information useful as well as a discussion on changes that need to be made to current HCI practices to make them more suitable to visual analytics. A history of analysis and analysis techniques and problems is provided as well as an introduction to user-centered evaluation and various evaluation techniques for readers from different disciplines. The understanding of these techniques is imperative if we wish to support analysis in the visual analytics software we develop. Currently the evaluations that are conducted and published for visual analytics software are very informal and consist mainly of comments from users or potential users. Our goal is to help researchers in visual analytics to conduct more formal user-centered evaluations. While these are time-consuming and expensive to carryout, the outcomes of these studies will have a defining impact on the field of visual analytics and help point the direction for future features and visualizations to incorporate. While many researchers view work in user-centered evaluation as a less-than-exciting area to work, the opposite is true. First of all, the goal is user-centered evaluation is to help visual analytics software developers, researchers, and designers improve their solutions and discover creative ways to better accommodate their users. Working with the users is extremely rewarding as well. While we use the term “users” in almost all situations there are a wide variety of users that all need to be accommodated. Moreover, the domains that use visual analytics are varied and expanding. Just understanding the complexities of a number of these domains is exciting. Researchers are trying out different visualizations and interactions as well. And of course, the size and variety of data are expanding rapidly. User-centered evaluation in this context is rapidly changing. There are no standard processes and metrics and thus those of us working on user-centered evaluation must be creative in our work with both the users and with the researchers and developers.« less

Free software for performing physical analysis of systems for digital radiography and mammography.

PubMed

Donini, Bruno; Rivetti, Stefano; Lanconelli, Nico; Bertolini, Marco

2014-05-01

In this paper, the authors present a free software for assisting users in achieving the physical characterization of x-ray digital systems and image quality checks. The program was developed as a plugin of a well-known public-domain suite ImageJ. The software can assist users in calculating various physical parameters such as the response curve (also termed signal transfer property), modulation transfer function (MTF), noise power spectra (NPS), and detective quantum efficiency (DQE). It also includes the computation of some image quality checks: defective pixel analysis, uniformity, dark analysis, and lag. The software was made available in 2009 and has been used during the last couple of years by many users who gave us valuable feedback for improving its usability. It was tested for achieving the physical characterization of several clinical systems for digital radiography and mammography. Various published papers made use of the outcomes of the plugin. This software is potentially beneficial to a variety of users: physicists working in hospitals, staff working in radiological departments, such as medical physicists, physicians, engineers. The plugin, together with a brief user manual, are freely available and can be found online (www.medphys.it/downloads.htm). With our plugin users can estimate all three most important parameters used for physical characterization (MTF, NPS, and also DQE). The plugin can run on any operating system equipped with ImageJ suite. The authors validated the software by comparing MTF and NPS curves on a common set of images with those obtained with other dedicated programs, achieving a very good agreement.

Presenting an evaluation model of the trauma registry software.

PubMed

Asadi, Farkhondeh; Paydar, Somayeh

2018-04-01

Trauma is a major cause of 10% death in the worldwide and is considered as a global concern. This problem has made healthcare policy makers and managers to adopt a basic strategy in this context. Trauma registry has an important and basic role in decreasing the mortality and the disabilities due to injuries resulted from trauma. Today, different software are designed for trauma registry. Evaluation of this software improves management, increases efficiency and effectiveness of these systems. Therefore, the aim of this study is to present an evaluation model for trauma registry software. The present study is an applied research. In this study, general and specific criteria of trauma registry software were identified by reviewing literature including books, articles, scientific documents, valid websites and related software in this domain. According to general and specific criteria and related software, a model for evaluating trauma registry software was proposed. Based on the proposed model, a checklist designed and its validity and reliability evaluated. Mentioned model by using of the Delphi technique presented to 12 experts and specialists. To analyze the results, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved by the experts and professionals, the final version of the evaluation model for the trauma registry software was presented. For evaluating of criteria of trauma registry software, two groups were presented: 1- General criteria, 2- Specific criteria. General criteria of trauma registry software were classified into four main categories including: 1- usability, 2- security, 3- maintainability, and 4-interoperability. Specific criteria were divided into four main categories including: 1- data submission and entry, 2- reporting, 3- quality control, 4- decision and research support. The presented model in this research has introduced important general and specific criteria of trauma registry software and sub criteria related to each main criteria separately. This model was validated by experts in this field. Therefore, this model can be used as a comprehensive model and a standard evaluation tool for measuring efficiency and effectiveness and performance improvement of trauma registry software. Copyright © 2018 Elsevier B.V. All rights reserved.

Achieving High Performance With TCP Over 40 GbE on NUMA Architectures for CMS Data Acquisition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bawej, Tomasz; et al.

2014-01-01

TCP and the socket abstraction have barely changed over the last two decades, but at the network layer there has been a giant leap from a few megabits to 100 gigabits in bandwidth. At the same time, CPU architectures have evolved into the multicore era and applications are expected to make full use of all available resources. Applications in the data acquisition domain based on the standard socket library running in a Non-Uniform Memory Access (NUMA) architecture are unable to reach full efficiency and scalability without the software being adequately aware about the IRQ (Interrupt Request), CPU and memory affinities.more » During the first long shutdown of LHC, the CMS DAQ system is going to be upgraded for operation from 2015 onwards and a new software component has been designed and developed in the CMS online framework for transferring data with sockets. This software attempts to wrap the low-level socket library to ease higher-level programming with an API based on an asynchronous event driven model similar to the DAT uDAPL API. It is an event-based application with NUMA optimizations, that allows for a high throughput of data across a large distributed system. This paper describes the architecture, the technologies involved and the performance measurements of the software in the context of the CMS distributed event building.« less

A cyber infrastructure for the SKA Telescope Manager

NASA Astrophysics Data System (ADS)

Barbosa, Domingos; Barraca, João. P.; Carvalho, Bruno; Maia, Dalmiro; Gupta, Yashwant; Natarajan, Swaminathan; Le Roux, Gerhard; Swart, Paul

2016-07-01

The Square Kilometre Array Telescope Manager (SKA TM) will be responsible for assisting the SKA Operations and Observation Management, carrying out System diagnosis and collecting Monitoring and Control data from the SKA subsystems and components. To provide adequate compute resources, scalability, operation continuity and high availability, as well as strict Quality of Service, the TM cyber-infrastructure (embodied in the Local Infrastructure - LINFRA) consists of COTS hardware and infrastructural software (for example: server monitoring software, host operating system, virtualization software, device firmware), providing a specially tailored Infrastructure as a Service (IaaS) and Platform as a Service (PaaS) solution. The TM infrastructure provides services in the form of computational power, software defined networking, power, storage abstractions, and high level, state of the art IaaS and PaaS management interfaces. This cyber platform will be tailored to each of the two SKA Phase 1 telescopes (SKA_MID in South Africa and SKA_LOW in Australia) instances, each presenting different computational and storage infrastructures and conditioned by location. This cyber platform will provide a compute model enabling TM to manage the deployment and execution of its multiple components (observation scheduler, proposal submission tools, MandC components, Forensic tools and several Databases, etc). In this sense, the TM LINFRA is primarily focused towards the provision of isolated instances, mostly resorting to virtualization technologies, while defaulting to bare hardware if specifically required due to performance, security, availability, or other requirement.

Design of admission medication reconciliation technology: a human factors approach to requirements and prototyping.

PubMed

Lesselroth, Blake J; Adams, Kathleen; Tallett, Stephanie; Wood, Scott D; Keeling, Amy; Cheng, Karen; Church, Victoria L; Felder, Robert; Tran, Hanna

2013-01-01

Our objectives were to (1) develop an in-depth understanding of the workflow and information flow in medication reconciliation, and (2) design medication reconciliation support technology using a combination of rapid-cycle prototyping and human-centered design. Although medication reconciliation is a national patient safety goal, limitations both of physical environment and in workflow can make it challenging to implement durable systems. We used several human factors techniques to gather requirements and develop a new process to collect a medication history at hospital admission. We completed an ethnography and time and motion analysis of pharmacists in order to illustrate the processes used to reconcile medications. We then used the requirements to design prototype multimedia software for collecting a bedside medication history. We observed how pharmacists incorporated the technology into their physical environment and documented usability issues. Admissions occurred in three phases: (1) list compilation, (2) order processing, and (3) team coordination. Current medication reconciliation processes at the hospital average 19 minutes to complete and do not include a bedside interview. Use of our technology during a bedside interview required an average of 29 minutes. The software represents a viable proof-of-concept to automate parts of history collection and enhance patient communication. However, we discovered several usability issues that require attention. We designed a patient-centered technology to enhance how clinicians collect a patient's medication history. By using multiple human factors methods, our research team identified system themes and design constraints that influence the quality of the medication reconciliation process and implementation effectiveness of new technology. Evidence-based design, human factors, patient-centered care, safety, technology.

Computer-Based Tools for Evaluating Graphical User Interfaces

NASA Technical Reports Server (NTRS)

Moore, Loretta A.

1997-01-01

The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

Engagement with the TeenDrivingPlan and diversity of teens' supervised practice driving: lessons for internet-based learner driver interventions.

PubMed

Winston, Flaura K; Mirman, Jessica H; Curry, Allison E; Pfeiffer, Melissa R; Elliott, Michael R; Durbin, Dennis R

2015-02-01

Inexperienced, less-skilled driving characterises many newly licensed drivers and contributes to high crash rates. A randomised trial of TeenDrivingPlan (TDP), a new learner driver phase internet-based intervention, demonstrated effectiveness in improving safety relevant, on-road driving behaviour, primarily through greater driving practice diversity. To inform future learner driver interventions, this analysis examined TDP use and its association with practice diversity. Posthoc analysis of data from teen/parent dyads (n=107), enrolled early in learner phase and assigned to treatment arm in randomised trial. Inserted software beacons captured TDP use data. Electronic surveys completed by parents and teens assessed diversity of practice driving and TDP usability ratings at 24 weeks (end of study period). Most families (84%) used TDP early in the learner period; however, the number of TDP sessions in the first week was three times higher among dyads who achieved greater practice diversity than those with less. By week five many families still engaged with TDP, but differences in TDP use could not be detected between families with high versus low practice diversity. Usability was not a major issue for this sample based on largely positive user ratings. An engaging internet-based intervention, such as TDP, can support families in achieving high practice diversity. Future learner driver interventions should provide important information early in the learner period when engagement is greatest, encourage continued learning as part of logging practice drives, and incorporate monitoring software for further personalisation to meet family needs. NCT01498575. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Implementation of k0-INAA standardisation at ITU TRIGA Mark II research reactor, Turkey based on k0-IAEA software

NASA Astrophysics Data System (ADS)

Esen, Ayse Nur; Haciyakupoglu, Sevilay

2016-02-01

The purpose of this study is to test the applicability of k0-INAA method at the Istanbul Technical University TRIGA Mark II research reactor. The neutron spectrum parameters such as epithermal neutron flux distribution parameter (α), thermal to epithermal neutron flux ratio (f) and thermal neutron flux (φth) were determined at the central irradiation channel of the ITU TRIGA Mark II research reactor using bare triple-monitor method. HPGe detector calibrations and calculations were carried out by k0-IAEA software. The α, f and φth values were calculated to be -0.009, 15.4 and 7.92·1012 cm-2 s-1, respectively. NIST SRM 1633b coal fly ash and intercomparison samples consisting of clay and sandy soil samples were used to evaluate the validity of the method. For selected elements, the statistical evaluation of the analysis results was carried out by z-score test. A good agreement between certified/reported and experimental values was obtained.

ImatraNMR: novel software for batch integration and analysis of quantitative NMR spectra.

PubMed

Mäkelä, A V; Heikkilä, O; Kilpeläinen, I; Heikkinen, S

2011-08-01

Quantitative NMR spectroscopy is a useful and important tool for analysis of various mixtures. Recently, in addition of traditional quantitative 1D (1)H and (13)C NMR methods, a variety of pulse sequences aimed for quantitative or semiquantitative analysis have been developed. To obtain actual usable results from quantitative spectra, they must be processed and analyzed with suitable software. Currently, there are many processing packages available from spectrometer manufacturers and third party developers, and most of them are capable of analyzing and integration of quantitative spectra. However, they are mainly aimed for processing single or few spectra, and are slow and difficult to use when large numbers of spectra and signals are being analyzed, even when using pre-saved integration areas or custom scripting features. In this article, we present a novel software, ImatraNMR, designed for batch analysis of quantitative spectra. In addition to capability of analyzing large number of spectra, it provides results in text and CSV formats, allowing further data-analysis using spreadsheet programs or general analysis programs, such as Matlab. The software is written with Java, and thus it should run in any platform capable of providing Java Runtime Environment version 1.6 or newer, however, currently it has only been tested with Windows and Linux (Ubuntu 10.04). The software is free for non-commercial use, and is provided with source code upon request. Copyright © 2011 Elsevier Inc. All rights reserved.

Enhancing Environmental HPC Applications: The EnCompAS approach

NASA Astrophysics Data System (ADS)

Frank, Anton; Donners, John; Pursula, Antti; Seinstra, Frank; Kranzlmüller, Dieter

2015-04-01

Many HPC applications in geoscience are of very high scientific quality and highly optimized for supercomputers. However, some of these codes lack the uptake by other adjacent scientific communities or industry due to deficiencies in usability, quality, and availability. Since enhancing software by, e.g., adding a graphical user interface, respecting data standards, setting up a support structure, or writing an extensive documentation is not of direct and immediate scientific relevance, most developers are not willing to invest any additional effort in these issues. Furthermore, if scientists, who are not directly involved in the development of some scientific software, could make benefit from additional features or interfaces, respective requests are often turned down due to the lack of time and resources. On the other hand, such enhancements are crucial for the sustainability of the scientific assets as well as the widespread or even worldwide distribution of European environmental software. Closely collaborating with environmental scientists the national supercomputing and eScience centres in Helsinki, Amsterdam, and Munich have identified that an enhancement of HPC and data analysis software must be provided as a service to the scientists developing such software. Therefore, first steps have been taken to establish respective services at these centres. In this talk we will present the already existing and envisioned service portfolio, some first success stories, and the approach to harmonize the current status aiming to turn this local effort into a pan-European service offering for environmental science.

MoniQA: a general approach to monitor quality assurance

NASA Astrophysics Data System (ADS)

Jacobs, J.; Deprez, T.; Marchal, G.; Bosmans, H.

2006-03-01

MoniQA ("Monitor Quality Assurance") is a new, non-commercial, independent quality assurance software application developed in our medical physics team. It is a complete Java TM - based modular environment for the evaluation of radiological viewing devices and it thus fits in the global quality assurance network of our (film less) radiology department. The purpose of the software tool is to guide the medical physicist through an acceptance protocol and the radiologist through a constancy check protocol by presentation of the necessary test patterns and by automated data collection. Data are then sent to a central management system for further analysis. At the moment more than 55 patterns have been implemented, which can be grouped in schemes to implement protocols (i.e. AAPMtg18, DIN and EUREF). Some test patterns are dynamically created and 'drawn' on the viewing device with random parameters as is the case in a recently proposed new pattern for constancy testing. The software is installed on 35 diagnostic stations (70 monitors) in a film less radiology department. Learning time was very limited. A constancy check -with the new pattern that assesses luminance decrease, resolution problems and geometric distortion- takes only 2 minutes and 28 seconds per monitor. The modular approach of the software allows the evaluation of new or emerging test patterns. We will report on the software and its usability: practicality of the constancy check tests in our hospital and on the results from acceptance tests of viewing stations for digital mammography.

SBSI: an extensible distributed software infrastructure for parameter estimation in systems biology.

PubMed

Adams, Richard; Clark, Allan; Yamaguchi, Azusa; Hanlon, Neil; Tsorman, Nikos; Ali, Shakir; Lebedeva, Galina; Goltsov, Alexey; Sorokin, Anatoly; Akman, Ozgur E; Troein, Carl; Millar, Andrew J; Goryanin, Igor; Gilmore, Stephen

2013-03-01

Complex computational experiments in Systems Biology, such as fitting model parameters to experimental data, can be challenging to perform. Not only do they frequently require a high level of computational power, but the software needed to run the experiment needs to be usable by scientists with varying levels of computational expertise, and modellers need to be able to obtain up-to-date experimental data resources easily. We have developed a software suite, the Systems Biology Software Infrastructure (SBSI), to facilitate the parameter-fitting process. SBSI is a modular software suite composed of three major components: SBSINumerics, a high-performance library containing parallelized algorithms for performing parameter fitting; SBSIDispatcher, a middleware application to track experiments and submit jobs to back-end servers; and SBSIVisual, an extensible client application used to configure optimization experiments and view results. Furthermore, we have created a plugin infrastructure to enable project-specific modules to be easily installed. Plugin developers can take advantage of the existing user-interface and application framework to customize SBSI for their own uses, facilitated by SBSI's use of standard data formats. All SBSI binaries and source-code are freely available from http://sourceforge.net/projects/sbsi under an Apache 2 open-source license. The server-side SBSINumerics runs on any Unix-based operating system; both SBSIVisual and SBSIDispatcher are written in Java and are platform independent, allowing use on Windows, Linux and Mac OS X. The SBSI project website at http://www.sbsi.ed.ac.uk provides documentation and tutorials.

A continuous usability evaluation of an electronic medication administration record application.

PubMed

Vicente Oliveros, Noelia; Gramage Caro, Teresa; Pérez Menéndez-Conde, Covadonga; Álvarez-Diaz, Ana María; Martín-Aragón Álvarez, Sagrario; Bermejo Vicedo, Teresa; Delgado Silveira, Eva

2017-12-01

The complexity of an electronic medication administration record (eMAR) has been underestimated by most designers in the past. Usability issues, such as poorly designed user application flow in eMAR, are therefore of vital importance, since they can have a negative impact on nursing activities and result in poor outcomes. The purpose of this study was to evaluate the usability of an eMAR application during its development. A usability evaluation was conducted during the development of the eMAR application. Two usability methods were used: a heuristic evaluation complemented by usability testing. Each eMAR application version provided by the vendor was evaluated by 2 hospital pharmacists, who applied the heuristic method. They reviewed the eMAR tasks, detected usability problems and their heuristic violations, and rated the severity of the usability problems. Usability testing was used to assess the final application version by observing how 3 nurses interacted with the application. Thirty-four versions were assessed before the eMAR application was considered usable. During the heuristic evaluation, the usability problems decreased from 46 unique usability problems in version 1 (V1) to 9 in version 34 (V34). In V1, usability problems were categorized into 154 heuristic violations, which decreased to 27 in V34. The average severity rating also decreased from major usability problem (2.96) to no problem (0.23). During usability testing, the 3 nurses did not encounter new usability problems. A thorough heuristic evaluation is a good method for obtaining a usable eMAR application. This evaluation points key areas for improvement and decreases usability problems and their severity. © 2017 John Wiley & Sons, Ltd.

Open access for ALICE analysis based on virtualization technology

NASA Astrophysics Data System (ADS)

Buncic, P.; Gheata, M.; Schutz, Y.

2015-12-01

Open access is one of the important leverages for long-term data preservation for a HEP experiment. To guarantee the usability of data analysis tools beyond the experiment lifetime it is crucial that third party users from the scientific community have access to the data and associated software. The ALICE Collaboration has developed a layer of lightweight components built on top of virtualization technology to hide the complexity and details of the experiment-specific software. Users can perform basic analysis tasks within CernVM, a lightweight generic virtual machine, paired with an ALICE specific contextualization. Once the virtual machine is launched, a graphical user interface is automatically started without any additional configuration. This interface allows downloading the base ALICE analysis software and running a set of ALICE analysis modules. Currently the available tools include fully documented tutorials for ALICE analysis, such as the measurement of strange particle production or the nuclear modification factor in Pb-Pb collisions. The interface can be easily extended to include an arbitrary number of additional analysis modules. We present the current status of the tools used by ALICE through the CERN open access portal, and the plans for future extensions of this system.

MARZ: Manual and automatic redshifting software

NASA Astrophysics Data System (ADS)

Hinton, S. R.; Davis, Tamara M.; Lidman, C.; Glazebrook, K.; Lewis, G. F.

2016-04-01

The Australian Dark Energy Survey (OzDES) is a 100-night spectroscopic survey underway on the Anglo-Australian Telescope using the fibre-fed 2-degree-field (2dF) spectrograph. We have developed a new redshifting application MARZ with greater usability, flexibility, and the capacity to analyse a wider range of object types than the RUNZ software package previously used for redshifting spectra from 2dF. MARZ is an open-source, client-based, Javascript web-application which provides an intuitive interface and powerful automatic matching capabilities on spectra generated from the AAOmega spectrograph to produce high quality spectroscopic redshift measurements. The software can be run interactively or via the command line, and is easily adaptable to other instruments and pipelines if conforming to the current FITS file standard is not possible. Behind the scenes, a modified version of the AUTOZ cross-correlation algorithm is used to match input spectra against a variety of stellar and galaxy templates, and automatic matching performance for OzDES spectra has increased from 54% (RUNZ) to 91% (MARZ). Spectra not matched correctly by the automatic algorithm can be easily redshifted manually by cycling automatic results, manual template comparison, or marking spectral features.

Electronic Nose: Evaluation of Kamina Prototype Unit

NASA Technical Reports Server (NTRS)

Schattke, Nathan

2001-01-01

The Kamina, Sam and Cyranose electronic nose systems were evaluated and partially trained. Much work was performed on the Kamina as it has the ability to respond to low (less than 10 ppb) concentrations of hydrazine compounds. We were able to tell the difference between Hydrazine (Hz) and Monomethylhydrazine (MMH) in standard clean humid air. We were able to detect MMH in reduced pressure (1/3 atm) at about 250 ppb, however the training set was to far from the real situation to be useful now. Various engineering and usability aspects of both the noses was noted, especially the software. One serious physical engineering flaw was remedied in the Kamina system. A gas flow manifold was created for the Sam system. Different chips were evaluated for the Kamina system. It is still unclear if they can be exchanged without retraining the software.The Sam Detect commercial unit was evaluated for solvent detection and evaluation. It was able to successfully identify some solvents. The Cyranose, was observed and evaluated for two days. It has the ability to detect gasses in the 100 parts per million level but not the 10 parts per billion level. It is very sensitive to humidity changes; there is software to partially handle this.

AlgoRun: a Docker-based packaging system for platform-agnostic implemented algorithms.

PubMed

Hosny, Abdelrahman; Vera-Licona, Paola; Laubenbacher, Reinhard; Favre, Thibauld

2016-08-01

There is a growing need in bioinformatics for easy-to-use software implementations of algorithms that are usable across platforms. At the same time, reproducibility of computational results is critical and often a challenge due to source code changes over time and dependencies. The approach introduced in this paper addresses both of these needs with AlgoRun, a dedicated packaging system for implemented algorithms, using Docker technology. Implemented algorithms, packaged with AlgoRun, can be executed through a user-friendly interface directly from a web browser or via a standardized RESTful web API to allow easy integration into more complex workflows. The packaged algorithm includes the entire software execution environment, thereby eliminating the common problem of software dependencies and the irreproducibility of computations over time. AlgoRun-packaged algorithms can be published on http://algorun.org, a centralized searchable directory to find existing AlgoRun-packaged algorithms. AlgoRun is available at http://algorun.org and the source code under GPL license is available at https://github.com/algorun laubenbacher@uchc.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Interactivity Centered Usability Evaluation (ICUE) for Course Management Systems

ERIC Educational Resources Information Center

Yoon, Sangil

2010-01-01

ICUE (Interactivity Centered Usability Evaluation) is an enhanced usability testing protocol created by the researcher. ICUE augments the facilitator's role for usability testing, and offers strategies in developing and presenting usability tasks during a testing session. ICUE was designed to address weaknesses found in the usability evaluation of…

Towards Portable Large-Scale Image Processing with High-Performance Computing.

PubMed

Huo, Yuankai; Blaber, Justin; Damon, Stephen M; Boyd, Brian D; Bao, Shunxing; Parvathaneni, Prasanna; Noguera, Camilo Bermudez; Chaganti, Shikha; Nath, Vishwesh; Greer, Jasmine M; Lyu, Ilwoo; French, William R; Newton, Allen T; Rogers, Baxter P; Landman, Bennett A

2018-05-03

High-throughput, large-scale medical image computing demands tight integration of high-performance computing (HPC) infrastructure for data storage, job distribution, and image processing. The Vanderbilt University Institute for Imaging Science (VUIIS) Center for Computational Imaging (CCI) has constructed a large-scale image storage and processing infrastructure that is composed of (1) a large-scale image database using the eXtensible Neuroimaging Archive Toolkit (XNAT), (2) a content-aware job scheduling platform using the Distributed Automation for XNAT pipeline automation tool (DAX), and (3) a wide variety of encapsulated image processing pipelines called "spiders." The VUIIS CCI medical image data storage and processing infrastructure have housed and processed nearly half-million medical image volumes with Vanderbilt Advanced Computing Center for Research and Education (ACCRE), which is the HPC facility at the Vanderbilt University. The initial deployment was natively deployed (i.e., direct installations on a bare-metal server) within the ACCRE hardware and software environments, which lead to issues of portability and sustainability. First, it could be laborious to deploy the entire VUIIS CCI medical image data storage and processing infrastructure to another HPC center with varying hardware infrastructure, library availability, and software permission policies. Second, the spiders were not developed in an isolated manner, which has led to software dependency issues during system upgrades or remote software installation. To address such issues, herein, we describe recent innovations using containerization techniques with XNAT/DAX which are used to isolate the VUIIS CCI medical image data storage and processing infrastructure from the underlying hardware and software environments. The newly presented XNAT/DAX solution has the following new features: (1) multi-level portability from system level to the application level, (2) flexible and dynamic software development and expansion, and (3) scalable spider deployment compatible with HPC clusters and local workstations.

Small cause - big effect: improvement in interface design results in improved data quality - a multicenter crossover study.

PubMed

Ahlbrandt, Janko; Henrich, Michael; Hartmann, Bernd A; Bundschuh, Bettina B; Schwarz, Julia; Klasen, Joachim; Röhrig, Rainer

2012-01-01

In Germany the core data set for anesthesia version 3.0 was recently introduced for external quality assurance, which includes five surgical tracer procedures. We found a low rate of correctly documented tracers when compared to procedure data (OPS-Codes) documented separately. Examination revealed that the graphical user interface (GUI) contravened the dialogue principles as defined in EN ISO 9241-110. We worked with the manufacturer to implement small improvements and roll out the software. A crossover study was conducted at a university hospital and a municipal hospital chain with five hospitals. All study sites and surgical tracer procedures combined, we found an improvement from 42% to 65% (p<0.001; N=34,610) correctly documented anesthesias. We also saw improvements for most of the observed surgical tracer procedures at all hospitals. Our results show the big effect small changes to the GUI can have on data quality. They also raise the question, if highly flexible and parameterized clinical documentation systems are suited to achieve high usability. Finding the right balance between GUIs designed by usability experts and the flexibility of parameterization by administrators will be a difficult task for the future and subject to further research.

Tailored Prevention of Inpatient Falls

PubMed Central

ZUYEV, LYUBOV; BENOIT, ANGELA N.; CHANG, FRANK Y.; DYKES, PATRICIA C.

2011-01-01

Patient falls and fall-related injuries are serious problems in hospitals. The Fall TIPS application aims to prevent patient falls by translating routine nursing fall risk assessment into a decision support intervention that communicates fall risk status and creates a tailored evidence-based plan of care that is accessible to the care team, patients, and family members. In our design and implementation of the Fall TIPS toolkit, we used the Spiral Software Development Life Cycle model. Three output tools available to be generated from the toolkit are bed poster, plan of care, and patient education handout. A preliminary design of the application was based on initial requirements defined by project leaders and informed by focus groups with end users. Preliminary design partially simulated the paper version of the Morse Fall Scale currently used in hospitals involved in the research study. Strengths and weaknesses of the first prototype were identified by heuristic evaluation. Usability testing was performed at sites where research study is implemented. Suggestions mentioned by end users participating in usability studies were either directly incorporated into the toolkit and output tools, were slightly modified, or will be addressed during training. The next step is implementation of the fall prevention toolkit on the pilot testing units. PMID:20975543

Is there a need for biomedical CBIR systems in clinical practice? Outcomes from a usability study

NASA Astrophysics Data System (ADS)

Antani, Sameer; Xue, Zhiyun; Long, L. Rodney; Bennett, Deborah; Ward, Sarah; Thoma, George R.

2011-03-01

Articles in the literature routinely describe advances in Content Based Image Retrieval (CBIR) and its potential for improving clinical practice, biomedical research and education. Several systems have been developed to address particular needs, however, surprisingly few are found to be in routine practical use. Our collaboration with the National Cancer Institute (NCI) has identified a need to develop tools to annotate and search a collection of over 100,000 cervigrams and related, anonymized patient data. One such tool developed for a projected need for retrieving similar patient images is the prototype CBIR system, called CervigramFinder, which retrieves images based on the visual similarity of particular regions on the cervix. In this article we report the outcomes from a usability study conducted at a primary meeting of practicing experts. We used the study to not only evaluate the system for software errors and ease of use, but also to explore its "user readiness", and to identify obstacles that hamper practical use of such systems, in general. Overall, the participants in the study found the technology interesting and bearing great potential; however, several challenges need to be addressed before the technology can be adopted.

Needs of ergonomic design at control units in production industries.

PubMed

Levchuk, I; Schäfer, A; Lang, K-H; Gebhardt, Hj; Klussmann, A

2012-01-01

During the last decades, an increasing use of innovative technologies in manufacturing areas was monitored. A huge amount of physical workload was replaced by the change from conventional machine tools to computer-controlled units. CNC systems spread in current production processes. Because of this, machine operators today mostly have an observational function. This caused increasing of static work (e.g., standing, sitting) and cognitive demands (e.g., process observation). Machine operators have a high responsibility, because mistakes may lead to human injuries as well as to product losses - and in consequence may lead to high monetary losses (for the company) as well. Being usable often means for a CNC machine being efficient. An intuitive usability and an ergonomic organization of CNC workplaces can be an essential basis to reduce the risk of failures in operation as well as physical complaints (e.g. pain or diseases because of bad body posture during work). In contrast to conventional machines, CNC machines are equipped both with hardware and software. An intuitive and clear-sighted operating of CNC systems is a requirement for quick learning of new systems. Within this study, a survey was carried out among trainees learning the operation of CNC machines.

Development of a Just-in-Time Adaptive mHealth Intervention for Insomnia: Usability Study.

PubMed

Pulantara, I Wayan; Parmanto, Bambang; Germain, Anne

2018-05-17

Healthy sleep is a fundamental component of physical and brain health. Insomnia, however, is a prevalent sleep disorder that compromises functioning, productivity, and health. Therefore, developing efficient treatment delivery methods for insomnia can have significant societal and personal health impacts. Cognitive behavioral therapy for insomnia (CBTI) is the recommended first-line treatment of insomnia but access is currently limited for patients, since treatment must occur in specialty sleep clinics, which suffer from an insufficient number of trained clinicians. Smartphone-based interventions offer a promising means for improving the delivery of CBTI. Furthermore, novel features such as real-time monitoring and assessment, personalization, dynamic adaptations of the intervention, and context awareness can enhance treatment personalization and effectiveness, and reduce associated costs. Ultimately, this "Just in Time Adaptive Intervention" for insomnia-an intervention approach that is acceptable to patients and clinicians, and is based on mobile health (mHealth) platform and tools-can significantly improve patient access and clinician delivery of evidence-based insomnia treatments. This study aims to develop and assess the usability of a Just in Time Adaptive Intervention application platform called iREST ("interactive Resilience Enhancing Sleep Tactics") for use in behavioral insomnia interventions. iREST can be used by both patients and clinicians. The development of iREST was based on the Iterative and Incremental Development software development model. Requirement analysis was based on the case study's description, workflow and needs, clinician inputs, and a previously conducted BBTI military study/implementation of the Just in Time Adaptive Intervention architecture. To evaluate the usability of the iREST mHealth tool, a pilot usability study was conducted. Additionally, this study explores the feasibility of using an off-the-shelf wearable device to supplement the subjective assessment of patient sleep patterns. The iREST app was developed from the mobile logical architecture of Just in Time Adaptive Intervention. It consists of a cross-platform smartphone app, a clinician portal, and secure 2-way communications platform between the app and the portal. The usability study comprised 19 Active Duty Service Members and Veterans between the ages of 18 and 60. Descriptive statistics based on in-app questionnaires indicate that on average, 12 (mean 12.23, SD 8.96) unique devices accessed the clinician portal per day for more than two years, while the app was rated as "highly usable", achieving a mean System Usability Score score of 85.74 (SD 12.37), which translates to an adjective rating of "Excellent". The participants also gave high scores on "ease of use and learnability" with an average score of 4.33 (SD 0.65) on a scale of 1 to 5. iREST provides a feasible platform for the implementation of Just in Time Adaptive Intervention in mHealth-based and remote intervention settings. The system was rated highly usable and its cross-platformness made it readily implemented within the heavily segregated smartphone market. The use of wearables to track sleep is promising; yet the accuracy of this technology needs further improvement. Ultimately, iREST demonstrates that mHealth-based Just in Time Adaptive Intervention is not only feasible, but also works effectively. ©I Wayan Pulantara, Bambang Parmanto, Anne Germain. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 17.05.2018.

Dynamic provisioning of a HEP computing infrastructure on a shared hybrid HPC system

NASA Astrophysics Data System (ADS)

Meier, Konrad; Fleig, Georg; Hauth, Thomas; Janczyk, Michael; Quast, Günter; von Suchodoletz, Dirk; Wiebelt, Bernd

2016-10-01

Experiments in high-energy physics (HEP) rely on elaborate hardware, software and computing systems to sustain the high data rates necessary to study rare physics processes. The Institut fr Experimentelle Kernphysik (EKP) at KIT is a member of the CMS and Belle II experiments, located at the LHC and the Super-KEKB accelerators, respectively. These detectors share the requirement, that enormous amounts of measurement data must be processed and analyzed and a comparable amount of simulated events is required to compare experimental results with theoretical predictions. Classical HEP computing centers are dedicated sites which support multiple experiments and have the required software pre-installed. Nowadays, funding agencies encourage research groups to participate in shared HPC cluster models, where scientist from different domains use the same hardware to increase synergies. This shared usage proves to be challenging for HEP groups, due to their specialized software setup which includes a custom OS (often Scientific Linux), libraries and applications. To overcome this hurdle, the EKP and data center team of the University of Freiburg have developed a system to enable the HEP use case on a shared HPC cluster. To achieve this, an OpenStack-based virtualization layer is installed on top of a bare-metal cluster. While other user groups can run their batch jobs via the Moab workload manager directly on bare-metal, HEP users can request virtual machines with a specialized machine image which contains a dedicated operating system and software stack. In contrast to similar installations, in this hybrid setup, no static partitioning of the cluster into a physical and virtualized segment is required. As a unique feature, the placement of the virtual machine on the cluster nodes is scheduled by Moab and the job lifetime is coupled to the lifetime of the virtual machine. This allows for a seamless integration with the jobs sent by other user groups and honors the fairshare policies of the cluster. The developed thin integration layer between OpenStack and Moab can be adapted to other batch servers and virtualization systems, making the concept also applicable for other cluster operators. This contribution will report on the concept and implementation of an OpenStack-virtualized cluster used for HEP workflows. While the full cluster will be installed in spring 2016, a test-bed setup with 800 cores has been used to study the overall system performance and dedicated HEP jobs were run in a virtualized environment over many weeks. Furthermore, the dynamic integration of the virtualized worker nodes, depending on the workload at the institute's computing system, will be described.

[Micro-community characteristics of vegetations in blowouts and depositional areas of Hulunbuir grassland, Inner Mongolia].

PubMed

Man, Liang; Hasi, Eerdun; Zhang, Ping; Yan, Xu; Xia, Xian-Dong

2008-10-01

By using traditional sampling methods, the micro-communities of vegetations in fixed, semi-bare, and bare blowouts of Hulunbuir grassland were investigated, and the investigation data were statistical analyzed. The results showed that the vegetation coverage decreased in the order of fixed blowout, semi-bare blowout, and bare blowout, and was lower than that of the primary vegetation Form. Stipa grandis. Potentilla acaulis and Kengia squarrosa were the dominant species in fixed blowout, with the coverage being 5%; while P. acaulis and Carex sp. were the dominant species in semi-bare blowout, with the coverage being 2%. The dominant species in depositional areas of semi-bare blowout were P. acaulis, K. squarrosa, Agropyron cristatum, and Thymus mongolicus, and the coverage was 4%. The dominant species on the southwest slope of bare blowout was Agriophyllum pungens. The middle depositional area of bare blowout was also occupied by A. pungens (coverage 4.7%), and the edge of it was dominated by A. cristatum (coverage 2.7%), Carex sp. (coverage 2.6%), and T. mongolicus (coverage 1.7%) from the edge of the depositional area to primary grassland. The mean species importance value in fixed, semi-bare, and bare blowouts was 12.64%, 13.38%, and 20.08%, while that in the depositional area of semi-bare blowout and in the middle and edge of bare blowout was 12.55%, 40.18%, and 11.15%, respectively.

Scientific bases of human-machine communication by voice.

PubMed Central

Schafer, R W

1995-01-01

The scientific bases for human-machine communication by voice are in the fields of psychology, linguistics, acoustics, signal processing, computer science, and integrated circuit technology. The purpose of this paper is to highlight the basic scientific and technological issues in human-machine communication by voice and to point out areas of future research opportunity. The discussion is organized around the following major issues in implementing human-machine voice communication systems: (i) hardware/software implementation of the system, (ii) speech synthesis for voice output, (iii) speech recognition and understanding for voice input, and (iv) usability factors related to how humans interact with machines. PMID:7479802

NGDS User Centered Design Meeting the Needs of the Geothermal Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Suzanne; Zheng, Sam; Patten, Kim

2013-10-15

In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineer- ing the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been research based, highly collabora- tive, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

Mobile Recommender Apps with Privacy Management for Accessible and Usable Technologies.

PubMed

Hersh, Marion; Leporini, Barbara

2017-01-01

The paper presents the preliminary results of an ongoing survey of the use of computers and mobile devices, interest in recommender apps and knowledge and concerns about privacy issues amongst English and Italian speaking disabled people. Participants were found to be regular users of computers and mobile devices for a range of applications. They were interested in recommender apps for household items, computer software and apps that met their accessibility and other requirements. They showed greater concerns about controlling access to personal data of different types than this data being retained by the computer or mobile device. They were also willing to make tradeoffs to improve device performance.

The development of the Final Approach Spacing Tool (FAST): A cooperative controller-engineer design approach

NASA Technical Reports Server (NTRS)

Lee, Katharine K.; Davis, Thomas J.

1995-01-01

Historically, the development of advanced automation for air traffic control in the United States has excluded the input of the air traffic controller until the need of the development process. In contrast, the development of the Final Approach Spacing Tool (FAST), for the terminal area controller, has incorporated the end-user in early, iterative testing. This paper describes a cooperative between the controller and the developer to create a tool which incorporates the complexity of the air traffic controller's job. This approach to software development has enhanced the usability of FAST and has helped smooth the introduction of FAST into the operational environment.

GLUE 2 deployment: Ensuring quality in the EGI/WLCG information system

NASA Astrophysics Data System (ADS)

Burke, Stephen; Alandes Pradillo, Maria; Field, Laurence; Keeble, Oliver

2014-06-01

The GLUE 2 information model is now fully supported in the production EGI/WLCG information system. However, to make it usable and allow clients to rely on the published information it is important that the meaning is clearly defined, and that information providers and site configurations are validated to ensure as far as possible that what they publish is correct. In this paper we describe the definition of a detailed schema usage profile, the implementation of a software tool to validate published information according to the profile and the use of the tool in the production Grid, and also summarise the overall state of GLUE 2 deployment.

Genetic Optimization and Simulation of a Piezoelectric Pipe-Crawling Inspection Robot

NASA Technical Reports Server (NTRS)

Hollinger, Geoffrey A.; Briscoe, Jeri M.

2004-01-01

Using the DarwinZk development software, a genetic algorithm (GA) was used to design and optimize a pipe-crawling robot for parameters such as mass, power consumption, and joint extension to further the research of the Miniature Inspection Systems Technology (MIST) team. In an attempt to improve on existing designs, a new robot was developed, the piezo robot. The final proposed design uses piezoelectric expansion actuators to move the robot with a 'chimneying' method employed by mountain climbers and greatly improves on previous designs in load bearing ability, pipe traversing specifications, and field usability. This research shows the advantages of GA assisted design in the field of robotics.

NGDS USER CENTERED DESIGN MEETING THE NEEDS OF THE GEOTHERMAL COMMUNITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Suzanne; Zheng, Sam Xianjun; Patten, Kim

In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineering the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been researched based, highly collaborative, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

Open source software in a practical approach for post processing of radiologic images.

PubMed

Valeri, Gianluca; Mazza, Francesco Antonino; Maggi, Stefania; Aramini, Daniele; La Riccia, Luigi; Mazzoni, Giovanni; Giovagnoni, Andrea

2015-03-01

The purpose of this paper is to evaluate the use of open source software (OSS) to process DICOM images. We selected 23 programs for Windows and 20 programs for Mac from 150 possible OSS programs including DICOM viewers and various tools (converters, DICOM header editors, etc.). The programs selected all meet the basic requirements such as free availability, stand-alone application, presence of graphical user interface, ease of installation and advanced features beyond simple display monitor. Capabilities of data import, data export, metadata, 2D viewer, 3D viewer, support platform and usability of each selected program were evaluated on a scale ranging from 1 to 10 points. Twelve programs received a score higher than or equal to eight. Among them, five obtained a score of 9: 3D Slicer, MedINRIA, MITK 3M3, VolView, VR Render; while OsiriX received 10. OsiriX appears to be the only program able to perform all the operations taken into consideration, similar to a workstation equipped with proprietary software, allowing the analysis and interpretation of images in a simple and intuitive way. OsiriX is a DICOM PACS workstation for medical imaging and software for image processing for medical research, functional imaging, 3D imaging, confocal microscopy and molecular imaging. This application is also a good tool for teaching activities because it facilitates the attainment of learning objectives among students and other specialists.

DigitSeis: A New Digitization Software and its Application to the Harvard-Adam Dziewoński Observatory Collection

NASA Astrophysics Data System (ADS)

Bogiatzis, P.; Altoé, I. L.; Karamitrou, A.; Ishii, M.; Ishii, H.

2015-12-01

DigitSeis is a new open-source, interactive digitization software written in MATLAB that converts digital, raster images of analog seismograms to readily usable, discretized time series using image processing algorithms. DigitSeis automatically identifies and corrects for various geometrical distortions of seismogram images that are acquired through the original recording, storage, and scanning procedures. With human supervision, the software further identifies and classifies important features such as time marks and notes, corrects time-mark offsets from the main trace, and digitizes the combined trace with an analysis to obtain as accurate timing as possible. Although a large effort has been made to minimize the human input, DigitSeis provides interactive tools for challenging situations such as trace crossings and stains in the paper. The effectiveness of the software is demonstrated with the digitization of seismograms that are over half a century old from the Harvard-Adam Dziewoński observatory that is still in operation as a part of the Global Seismographic Network (station code HRV and network code IU). The spectral analysis of the digitized time series shows no spurious features that may be related to the occurrence of minute and hour marks. They also display signals associated with significant earthquakes, and a comparison of the spectrograms with modern recordings reveals similarities in the background noise.

Public safety answering point readiness for wireless E-911 in New York State.

PubMed

Bailey, Bob W; Scott, Jay M; Brown, Lawrence H

2003-01-01

To determine the level of wireless enhanced 911 readiness among New York's primary public safety answering points. This descriptive study utilized a simple, single-page survey that was distributed in August 2001, with telephone follow-up concluding in January 2002. Surveys were distributed to directors of the primary public safety answering points in each of New York's 62 counties. Information was requested regarding current readiness for providing wireless enhanced 911 service, hardware and software needs for implementing the service, and the estimated costs for obtaining the necessary hardware and software. Two directors did not respond and could not be contacted by telephone; three declined participation; one did not operate an answering point; and seven provided incomplete responses, resulting in usable data from 49 (79%) of the state's public safety answering points. Only 27% of the responding public safety answering points were currently wireless enhanced 911 ready. Specific needs included obtaining or upgrading computer systems (16%), computer-aided dispatch systems (53%), mapping software (71%), telephone systems (27%), and local exchange carrier trunk lines (42%). The total estimated hardware and software costs for achieving wireless enhanced 911 readiness was between 16 million and 20 million dollars. New York's primary public safety answering points are not currently ready to provide wireless enhanced 911 service, and the cost for achieving readiness could be as high as 20 million dollars.

LFQProfiler and RNP(xl): Open-Source Tools for Label-Free Quantification and Protein-RNA Cross-Linking Integrated into Proteome Discoverer.

PubMed

Veit, Johannes; Sachsenberg, Timo; Chernev, Aleksandar; Aicheler, Fabian; Urlaub, Henning; Kohlbacher, Oliver

2016-09-02

Modern mass spectrometry setups used in today's proteomics studies generate vast amounts of raw data, calling for highly efficient data processing and analysis tools. Software for analyzing these data is either monolithic (easy to use, but sometimes too rigid) or workflow-driven (easy to customize, but sometimes complex). Thermo Proteome Discoverer (PD) is a powerful software for workflow-driven data analysis in proteomics which, in our eyes, achieves a good trade-off between flexibility and usability. Here, we present two open-source plugins for PD providing additional functionality: LFQProfiler for label-free quantification of peptides and proteins, and RNP(xl) for UV-induced peptide-RNA cross-linking data analysis. LFQProfiler interacts with existing PD nodes for peptide identification and validation and takes care of the entire quantitative part of the workflow. We show that it performs at least on par with other state-of-the-art software solutions for label-free quantification in a recently published benchmark ( Ramus, C.; J. Proteomics 2016 , 132 , 51 - 62 ). The second workflow, RNP(xl), represents the first software solution to date for identification of peptide-RNA cross-links including automatic localization of the cross-links at amino acid resolution and localization scoring. It comes with a customized integrated cross-link fragment spectrum viewer for convenient manual inspection and validation of the results.

Towards a Usability and Error "Safety Net": A Multi-Phased Multi-Method Approach to Ensuring System Usability and Safety.

PubMed

Kushniruk, Andre; Senathirajah, Yalini; Borycki, Elizabeth

2017-01-01

The usability and safety of health information systems have become major issues in the design and implementation of useful healthcare IT. In this paper we describe a multi-phased multi-method approach to integrating usability engineering methods into system testing to ensure both usability and safety of healthcare IT upon widespread deployment. The approach involves usability testing followed by clinical simulation (conducted in-situ) and "near-live" recording of user interactions with systems. At key stages in this process, usability problems are identified and rectified forming a usability and technology-induced error "safety net" that catches different types of usability and safety problems prior to releasing systems widely in healthcare settings.

The Perseus computational platform for comprehensive analysis of (prote)omics data.

PubMed

Tyanova, Stefka; Temu, Tikira; Sinitcyn, Pavel; Carlson, Arthur; Hein, Marco Y; Geiger, Tamar; Mann, Matthias; Cox, Jürgen

2016-09-01

A main bottleneck in proteomics is the downstream biological analysis of highly multivariate quantitative protein abundance data generated using mass-spectrometry-based analysis. We developed the Perseus software platform (http://www.perseus-framework.org) to support biological and biomedical researchers in interpreting protein quantification, interaction and post-translational modification data. Perseus contains a comprehensive portfolio of statistical tools for high-dimensional omics data analysis covering normalization, pattern recognition, time-series analysis, cross-omics comparisons and multiple-hypothesis testing. A machine learning module supports the classification and validation of patient groups for diagnosis and prognosis, and it also detects predictive protein signatures. Central to Perseus is a user-friendly, interactive workflow environment that provides complete documentation of computational methods used in a publication. All activities in Perseus are realized as plugins, and users can extend the software by programming their own, which can be shared through a plugin store. We anticipate that Perseus's arsenal of algorithms and its intuitive usability will empower interdisciplinary analysis of complex large data sets.

Localizer: fast, accurate, open-source, and modular software package for superresolution microscopy

PubMed Central

Duwé, Sam; Neely, Robert K.; Zhang, Jin

2012-01-01

Abstract. We present Localizer, a freely available and open source software package that implements the computational data processing inherent to several types of superresolution fluorescence imaging, such as localization (PALM/STORM/GSDIM) and fluctuation imaging (SOFI/pcSOFI). Localizer delivers high accuracy and performance and comes with a fully featured and easy-to-use graphical user interface but is also designed to be integrated in higher-level analysis environments. Due to its modular design, Localizer can be readily extended with new algorithms as they become available, while maintaining the same interface and performance. We provide front-ends for running Localizer from Igor Pro, Matlab, or as a stand-alone program. We show that Localizer performs favorably when compared with two existing superresolution packages, and to our knowledge is the only freely available implementation of SOFI/pcSOFI microscopy. By dramatically improving the analysis performance and ensuring the easy addition of current and future enhancements, Localizer strongly improves the usability of superresolution imaging in a variety of biomedical studies. PMID:23208219

Remote Sensing Application to Land Use Classification in a Rapidly Changing Agricultural/Urban Area: City of Virginia Beach, Virginia. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Odenyo, V. A. O.

1975-01-01

Remote sensing data on computer-compatible tapes of LANDSAT 1 multispectral scanner imager were analyzed to generate a land use map of the City of Virginia Beach. All four bands were used in both the supervised and unsupervised approaches with the LAYSYS software system. Color IR imagery of a U-2 flight of the same area was also digitized and two sample areas were analyzed via the unsupervised approach. The relationships between the mapped land use and the soils of the area were investigated. A land use land cover map at a scale of 1:24,000 was obtained from the supervised analysis of LANDSAT 1 data. It was concluded that machine analysis of remote sensing data to produce land use maps was feasible; that the LAYSYS software system was usable for this purpose; and that the machine analysis was capable of extracting detailed information from the relatively small scale LANDSAT data in a much shorter time without compromising accuracy.

User modeling techniques for enhanced usability of OPSMODEL operations simulation software

NASA Technical Reports Server (NTRS)

Davis, William T.

1991-01-01

The PC based OPSMODEL operations software for modeling and simulation of space station crew activities supports engineering and cost analyses and operations planning. Using top-down modeling, the level of detail required in the data base can be limited to being commensurate with the results required of any particular analysis. To perform a simulation, a resource environment consisting of locations, crew definition, equipment, and consumables is first defined. Activities to be simulated are then defined as operations and scheduled as desired. These operations are defined within a 1000 level priority structure. The simulation on OPSMODEL, then, consists of the following: user defined, user scheduled operations executing within an environment of user defined resource and priority constraints. Techniques for prioritizing operations to realistically model a representative daily scenario of on-orbit space station crew activities are discussed. The large number of priority levels allows priorities to be assigned commensurate with the detail necessary for a given simulation. Several techniques for realistic modeling of day-to-day work carryover are also addressed.

MetaPathways v2.5: quantitative functional, taxonomic and usability improvements.

PubMed

Konwar, Kishori M; Hanson, Niels W; Bhatia, Maya P; Kim, Dongjae; Wu, Shang-Ju; Hahn, Aria S; Morgan-Lang, Connor; Cheung, Hiu Kan; Hallam, Steven J

2015-10-15

Next-generation sequencing is producing vast amounts of sequence information from natural and engineered ecosystems. Although this data deluge has an enormous potential to transform our lives, knowledge creation and translation need software applications that scale with increasing data processing and analysis requirements. Here, we present improvements to MetaPathways, an annotation and analysis pipeline for environmental sequence information that expedites this transformation. We specifically address pathway prediction hazards through integration of a weighted taxonomic distance and enable quantitative comparison of assembled annotations through a normalized read-mapping measure. Additionally, we improve LAST homology searches through BLAST-equivalent E-values and output formats that are natively compatible with prevailing software applications. Finally, an updated graphical user interface allows for keyword annotation query and projection onto user-defined functional gene hierarchies, including the Carbohydrate-Active Enzyme database. MetaPathways v2.5 is available on GitHub: http://github.com/hallamlab/metapathways2. shallam@mail.ubc.ca Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

SimVascular: An Open Source Pipeline for Cardiovascular Simulation.

PubMed

Updegrove, Adam; Wilson, Nathan M; Merkow, Jameson; Lan, Hongzhi; Marsden, Alison L; Shadden, Shawn C

2017-03-01

Patient-specific cardiovascular simulation has become a paradigm in cardiovascular research and is emerging as a powerful tool in basic, translational and clinical research. In this paper we discuss the recent development of a fully open-source SimVascular software package, which provides a complete pipeline from medical image data segmentation to patient-specific blood flow simulation and analysis. This package serves as a research tool for cardiovascular modeling and simulation, and has contributed to numerous advances in personalized medicine, surgical planning and medical device design. The SimVascular software has recently been refactored and expanded to enhance functionality, usability, efficiency and accuracy of image-based patient-specific modeling tools. Moreover, SimVascular previously required several licensed components that hindered new user adoption and code management and our recent developments have replaced these commercial components to create a fully open source pipeline. These developments foster advances in cardiovascular modeling research, increased collaboration, standardization of methods, and a growing developer community.

Using 3-D Numerical Weather Data in Piloted Simulations

NASA Technical Reports Server (NTRS)

Daniels, Taumi S.

2016-01-01

This report describes the process of acquiring and using 3-D numerical model weather data sets in NASA Langley's Research Flight Deck (RFD). A set of software tools implement the process and can be used for other purposes as well. Given time and location information of a weather phenomenon of interest, the user can download associated numerical weather model data. These data are created by the National Oceanic and Atmospheric Administration (NOAA) High Resolution Rapid Refresh (HRRR) model, and are then processed using a set of Mathworks' Matlab(TradeMark) scripts to create the usable 3-D weather data sets. Each data set includes radar re ectivity, water vapor, component winds, temperature, supercooled liquid water, turbulence, pressure, altitude, land elevation, relative humidity, and water phases. An open-source data processing program, wgrib2, is available from NOAA online, and is used along with Matlab scripts. These scripts are described with sucient detail to make future modi cations. These software tools have been used to generate 3-D weather data for various RFD experiments.

User's guide to image processing applications of the NOAA satellite HRPT/AVHRR data. Part 1: Introduction to the satellite system and its applications. Part 2: Processing and analysis of AVHRR imagery

NASA Technical Reports Server (NTRS)

Huh, Oscar Karl; Leibowitz, Scott G.; Dirosa, Donald; Hill, John M.

1986-01-01

The use of NOAA Advanced Very High Resolution Radar/High Resolution Picture Transmission (AVHRR/HRPT) imagery for earth resource applications is provided for the applications scientist for use within the various Earth science, resource, and agricultural disciplines. A guide to processing NOAA AVHRR data using the hardware and software systems integrated for this NASA project is provided. The processing steps from raw data on computer compatible tapes (1B data format) through usable qualitative and quantitative products for applications are given. The manual is divided into two parts. The first section describes the NOAA satellite system, its sensors, and the theoretical basis for using these data for environmental applications. Part 2 is a hands-on description of how to use a specific image processing system, the International Imaging Systems, Inc. (I2S) Model 75 Array Processor and S575 software, to process these data.

Flexible, fast and accurate sequence alignment profiling on GPGPU with PaSWAS.

PubMed

Warris, Sven; Yalcin, Feyruz; Jackson, Katherine J L; Nap, Jan Peter

2015-01-01

To obtain large-scale sequence alignments in a fast and flexible way is an important step in the analyses of next generation sequencing data. Applications based on the Smith-Waterman (SW) algorithm are often either not fast enough, limited to dedicated tasks or not sufficiently accurate due to statistical issues. Current SW implementations that run on graphics hardware do not report the alignment details necessary for further analysis. With the Parallel SW Alignment Software (PaSWAS) it is possible (a) to have easy access to the computational power of NVIDIA-based general purpose graphics processing units (GPGPUs) to perform high-speed sequence alignments, and (b) retrieve relevant information such as score, number of gaps and mismatches. The software reports multiple hits per alignment. The added value of the new SW implementation is demonstrated with two test cases: (1) tag recovery in next generation sequence data and (2) isotype assignment within an immunoglobulin 454 sequence data set. Both cases show the usability and versatility of the new parallel Smith-Waterman implementation.

[Creating language model of the forensic medicine domain for developing a autopsy recording system by automatic speech recognition].

PubMed

Niijima, H; Ito, N; Ogino, S; Takatori, T; Iwase, H; Kobayashi, M

2000-11-01

For the purpose of practical use of speech recognition technology for recording of forensic autopsy, a language model of the speech recording system, specialized for the forensic autopsy, was developed. The language model for the forensic autopsy by applying 3-gram model was created, and an acoustic model for Japanese speech recognition by Hidden Markov Model in addition to the above were utilized to customize the speech recognition engine for forensic autopsy. A forensic vocabulary set of over 10,000 words was compiled and some 300,000 sentence patterns were made to create the forensic language model, then properly mixing with a general language model to attain high exactitude. When tried by dictating autopsy findings, this speech recognition system was proved to be about 95% of recognition rate that seems to have reached to the practical usability in view of speech recognition software, though there remains rooms for improving its hardware and application-layer software.

From Usability Engineering to Evidence-based Usability in Health IT.

PubMed

Marcilly, Romaric; Peute, Linda; Beuscart-Zephir, Marie-Catherine

2016-01-01

Usability is a critical factor in the acceptance, safe use, and success of health IT. The User-Centred Design process is widely promoted to improve usability. However, this traditional case by case approach that is rooted in the sound understanding of users' needs is not sufficient to improve technologies' usability and prevent usability-induced use-errors that may harm patients. It should be enriched with empirical evidence. This evidence is on design elements (what are the most valuable design principles, and the worst usability mistakes), and on the usability evaluation methods (which combination of methods is most suitable in which context). To achieve this evidence, several steps must be fulfilled and challenges must be overcome. Some attempts to search evidence for designing elements of health IT and for usability evaluation methods exist and are summarized. A concrete instance of evidence-based usability design principles for medication-related alerting systems is briefly described.

Measuring AT Usability with the Modified System Usability Scale (SUS).

PubMed

Friesen, Emma L

2017-01-01

The modified System Usability Scale (SUS) is a widely used generic measure of product usability. This study concerns the usability of mobile shower commodes using correlations between the SUS and AT device-specific measures. Results suggest the modified SUS, and corresponding adjective-anchored rating scale, are appropriate for measuring MSC usability, and have potential for use with other AT devices.

The New Cloud Absorption Radiometer (CAR) Software: One Model for NASA Remote Sensing Virtual Instruments

NASA Technical Reports Server (NTRS)

Roth, Don J.; Rapchun, David A.; Jones, Hollis H.

2001-01-01

The Cloud Absorption Radiometer (CAR) instrument has been the most frequently used airborne instrument built in-house at NASA Goddard Space Flight Center, having flown scientific research missions on-board various aircraft to many locations in the United States, Azores, Brazil, and Kuwait since 1983. The CAR instrument is capable of measuring scattered light by clouds in fourteen spectral bands in UV, visible and near-infrared region. This document describes the control, data acquisition, display, and file storage software for the new version of CAR. This software completely replaces the prior CAR Data System and Control Panel with a compact and robust virtual instrument computer interface. Additionally, the instrument is now usable for the first time for taking data in an off-aircraft mode. The new instrument is controlled via a LabVIEW v5. 1.1-developed software interface that utilizes, (1) serial port writes to write commands to the controller module of the instrument, and (2) serial port reads to acquire data from the controller module of the instrument. Step-by-step operational procedures are provided in this document. A suite of other software programs has been developed to complement the actual CAR virtual instrument. These programs include: (1) a simulator mode that allows pretesting of new features that might be added in the future, as well as demonstrations to CAR customers, and development at times when the instrument/hardware is off-location, and (2) a post-experiment data viewer that can be used to view all segments of individual data cycles and to locate positions where 'start' and stop' byte sequences were incorrectly formulated by the instrument controller. The CAR software described here is expected to be the basis for CAR operation for many missions and many years to come.

Barriers to comparing the usability of electronic health records.

PubMed

Ratwani, Raj M; Hettinger, A Zachary; Fairbanks, Rollin J

2017-04-01

Despite the widespread adoption of electronic health records (EHRs), usability of many EHRs continues to be suboptimal, with some vendors failing to meet usability standards, resulting in clinician frustration and patient safety hazards. In an effort to increase EHR vendor competition on usability, recommendations have been made and legislation drafted to develop comparison tools that would allow purchasers to better understand the usability of EHR products prior to purchase. Usability comparison can be based on EHR vendor design and development processes, vendor usability testing as part of the Office of the National Coordinator for Health Information Technology certification program, and usability of implemented products. Barriers exist within the current certified health technology program that prevent effective comparison of usability during each of these stages. We describe the importance of providing purchasers with improved information about EHR usability, barriers to making usability comparisons, and solutions to overcome these barriers. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Semiquantitative color profiling of soils over a land degradation gradient in Sakaerat, Thailand.

PubMed

Doi, Ryoichi; Wachrinrat, Chongrak; Teejuntuk, Sakhan; Sakurai, Katsutoshi; Sahunalu, Pongsak

2010-11-01

In this study, we attempted multivariate color profiling of soils over a land degradation gradient represented by dry evergreen forest (original vegetation), dry deciduous forest (moderately disturbed by fire), and bare ground (severely degraded) in Sakaerat, Thailand. The soils were sampled in a dry-to-wet seasonal transition. Values of the red-green-blue (RGB), cyan-magenta-yellow-key black (CMYK), L*a*b*, and hue-intensity-saturation (HIS) color models were determined using the digital software Adobe Photoshop. Land degradation produced significant variations (p<0.05) in R, C, Y, L*, a*, b*, S, and I values (p<0.05). The seasonal transition produced significant variations (p<0.05) in R, G, B, C, M, K, L*, b*, and I values. In discriminating the soils, the color models did not differ in discriminatory power, while discriminatory power was affected by seasonal changes. Most color variation patterns had nonlinear relationships with the intensity of the land degradation gradient, due to effects of fire that darkened the deciduous forest soil, masking the nature of the soil as the intermediate between the evergreen forest and the bare ground soils. Taking these findings into account, the utilization of color profiling of soils in land conservation and rehabilitation is discussed.

Usability of a novel digital medicine system in adults with schizophrenia treated with sensor-embedded tablets of aripiprazole.

PubMed

Peters-Strickland, Timothy; Pestreich, Linda; Hatch, Ainslie; Rohatagi, Shashank; Baker, Ross A; Docherty, John P; Markovtsova, Lada; Raja, Praveen; Weiden, Peter J; Walling, David P

2016-01-01

Digital medicine system (DMS) is a novel drug-device combination that objectively measures and reports medication ingestion. The DMS consists of medication embedded with an ingestible sensor (digital medicine), a wearable sensor, and software applications. This study evaluated usability of the DMS in adults with schizophrenia rated by both patients and their health care providers (HCPs) during 8-week treatment with prescribed doses of digital aripiprazole. Six US sites enrolled outpatients into this Phase IIa, open-label study (NCT02219009). The study comprised a screening phase, a training phase (three weekly site visits), and a 5-week independent phase. Patients and HCPs independently rated usability of and satisfaction with the DMS. Sixty-seven patients were enrolled, and 49 (73.1%) patients completed the study. The mean age (SD) of the patients was 46.6 years (9.7 years); the majority of them were male (74.6%), black (76.1%), and rated mildly ill on the Clinical Global Impression - Severity scale (70.1%). By the end of week 8 or early termination, 82.1% (55/67) of patients had replaced the wearable sensor independently or with minimal assistance, based on HCP rating. The patients used the wearable sensor for a mean (SD) of 70.7% (24.7%) and a median of 77.8% of their time in the trial. The patients contacted a call center most frequently at week 1. At the last visit, 78% (47/60) of patients were somewhat satisfied/satisfied/extremely satisfied with the DMS. A high proportion of patients with schizophrenia were able to use the DMS and reported satisfaction with the DMS. These data support the potential utility of the DMS in clinical practice.

Development and preliminary user testing of the DCIDA (Dynamic computer interactive decision application) for 'nudging' patients towards high quality decisions.

PubMed

Bansback, Nick; Li, Linda C; Lynd, Larry; Bryan, Stirling

2014-08-01

Patient decision aids (PtDA) are developed to facilitate informed, value-based decisions about health. Research suggests that even when informed with necessary evidence and information, cognitive errors can prevent patients from choosing the option that is most congruent with their own values. We sought to utilize principles of behavioural economics to develop a computer application that presents information from conventional decision aids in a way that reduces these errors, subsequently promoting higher quality decisions. The Dynamic Computer Interactive Decision Application (DCIDA) was developed to target four common errors that can impede quality decision making with PtDAs: unstable values, order effects, overweighting of rare events, and information overload. Healthy volunteers were recruited to an interview to use three PtDAs converted to the DCIDA on a computer equipped with an eye tracker. Participants were first used a conventional PtDA, and then subsequently used the DCIDA version. User testing was assessed based on whether respondents found the software both usable: evaluated using a) eye-tracking, b) the system usability scale, and c) user verbal responses from a 'think aloud' protocol; and useful: evaluated using a) eye-tracking, b) whether preferences for options were changed, and c) and the decisional conflict scale. Of the 20 participants recruited to the study, 11 were male (55%), the mean age was 35, 18 had at least a high school education (90%), and 8 (40%) had a college or university degree. Eye-tracking results, alongside a mean system usability scale score of 73 (range 68-85), indicated a reasonable degree of usability for the DCIDA. The think aloud study suggested areas for further improvement. The DCIDA also appeared to be useful to participants wherein subjects focused more on the features of the decision that were most important to them (21% increase in time spent focusing on the most important feature). Seven subjects (25%) changed their preferred option when using DCIDA. Preliminary results suggest that DCIDA has potential to improve the quality of patient decision-making. Next steps include larger studies to test individual components of DCIDA and feasibility testing with patients making real decisions.

Comparative efficacy of new interfaces for intra-procedural imaging review: the Microsoft Kinect, Hillcrest Labs Loop Pointer, and the Apple iPad.

PubMed

Chao, Cherng; Tan, Justin; Castillo, Edward M; Zawaideh, Mazen; Roberts, Anne C; Kinney, Thomas B

2014-08-01

We adapted and evaluated the Microsoft Kinect (touchless interface), Hillcrest Labs Loop Pointer (gyroscopic mouse), and the Apple iPad (multi-touch tablet) for intra-procedural imaging review efficacy in a simulation using MIM Software DICOM viewers. Using each device, 29 radiologists executed five basic interactions to complete the overall task of measuring an 8.1-cm hepatic lesion: scroll, window, zoom, pan, and measure. For each interaction, participants assessed the devices on a 3-point subjective scale (3 = highest usability score). The five individual scores were summed to calculate a subjective composite usability score (max 15 points). Overall task time to completion was recorded. Each user also assessed each device for its potential to jeopardize a sterile field. The composite usability scores were as follows: Kinect 9.9 (out of 15.0; SD = 2.8), Loop Pointer 12.9 (SD = 13.5), and iPad 13.5 (SD = 1.8). Mean task completion times were as follows: Kinect 156.7 s (SD = 86.5), Loop Pointer 51.5 s (SD = 30.6), and iPad 41.1 s (SD = 25.3). The mean hepatic lesion measurements were as follows: Kinect was 7.3 cm (SD = 0.9), Loop Pointer 7.8 cm (SD = 1.1), and iPad 8.2 cm (SD = 1.2). The mean deviations from true hepatic lesion measurement were as follows: Kinect 1.0 cm and for both the Loop Pointer and iPad, 0.9 cm (SD = 0.7). The Kinect had the least and iPad had the most subjective concern for compromising the sterile field. A new intra-operative imaging review interface may be near. Most surveyed foresee these devices as useful in procedures, and most do not anticipate problems with a sterile field. An ideal device would combine iPad's usability and accuracy with the Kinect's touchless aspect.

36 CFR 1193.39 - Prohibited reduction of accessibility, usability, and compatibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accessibility, usability, and compatibility. 1193.39 Section 1193.39 Parks, Forests, and Public Property... Requirements for Accessibility and Usability § 1193.39 Prohibited reduction of accessibility, usability, and... accessibility, usability, or compatibility of telecommunications equipment or customer premises equipment. (b...

36 CFR 1193.39 - Prohibited reduction of accessibility, usability, and compatibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... accessibility, usability, and compatibility. 1193.39 Section 1193.39 Parks, Forests, and Public Property... Requirements for Accessibility and Usability § 1193.39 Prohibited reduction of accessibility, usability, and... accessibility, usability, or compatibility of telecommunications equipment or customer premises equipment. (b...

36 CFR 1193.39 - Prohibited reduction of accessibility, usability, and compatibility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... accessibility, usability, and compatibility. 1193.39 Section 1193.39 Parks, Forests, and Public Property... Requirements for Accessibility and Usability § 1193.39 Prohibited reduction of accessibility, usability, and... accessibility, usability, or compatibility of telecommunications equipment or customer premises equipment. (b...

36 CFR 1193.39 - Prohibited reduction of accessibility, usability, and compatibility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... accessibility, usability, and compatibility. 1193.39 Section 1193.39 Parks, Forests, and Public Property... Requirements for Accessibility and Usability § 1193.39 Prohibited reduction of accessibility, usability, and... accessibility, usability, or compatibility of telecommunications equipment or customer premises equipment. (b...

Usability of patient-centered health IT: mixed-methods usability study of ePill.

PubMed

Schmidt-Kraepelin, Manuel; Dehling, Tobias; Sunyaev, Ali

2014-01-01

To facilitate use of patient-centered health IT applications in everyday life, a high degree of usability is required. Based on the example of a patient-centered web application, we propose a usability study design enabling developers and researchers to assess usability of patient-centered health IT applications and derive implications for their improvement. Our study design integrates tasks that subjects have to process, an associated questionnaire based on Perceived Ease of Use, Perceived Usefulness, Attitude Toward Using, and Behavioral Intention to Use, a System Usability Scale questionnaire, and focus groups. Application of the usability study design demonstrates its feasibility and provides insights for assessment of usability in related projects in research and practice.

Influence of standardization on the precision (reproducibility) of dental cast analysis with virtual 3-dimensional models.

PubMed

Hayashi, Kazuo; Chung, Onejune; Park, Seojung; Lee, Seung-Pyo; Sachdeva, Rohit C L; Mizoguchi, Itaru

2015-03-01

Virtual 3-dimensional (3D) models obtained by scanning of physical casts have become an alternative to conventional dental cast analysis in orthodontic treatment. If the precision (reproducibility) of virtual 3D model analysis can be further improved, digital orthodontics could be even more widely accepted. The purpose of this study was to clarify the influence of "standardization" of the target points for dental cast analysis using virtual 3D models. Physical plaster models were also measured to obtain additional information. Five sets of dental casts were used. The dental casts were scanned with R700 (3Shape, Copenhagen, Denmark) and REXCAN DS2 3D (Solutionix, Seoul, Korea) scanners. In this study, 3 system and software packages were used: SureSmile (OraMetrix, Richardson, Tex), Rapidform (Inus, Seoul, Korea), and I-DEAS (SDRC, Milford, Conn). Without standardization, the maximum differences were observed between the SureSmile software and the Rapidform software (0.39 mm ± 0.07). With standardization, the maximum differences were observed between the SureSmile software and measurements with a digital caliper (0.099 mm ± 0.01), and this difference was significantly greater (P <0.05) than the 2 other mean difference values. Furthermore, the results of this study showed that the mean differences "WITH" standardization were significantly lower than those "WITHOUT" standardization for all systems, software packages, or methods. The results showed that elimination of the influence of usability or habituation is important for improving the reproducibility of dental cast analysis. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Visual programming for next-generation sequencing data analytics.

PubMed

Milicchio, Franco; Rose, Rebecca; Bian, Jiang; Min, Jae; Prosperi, Mattia

2016-01-01

High-throughput or next-generation sequencing (NGS) technologies have become an established and affordable experimental framework in biological and medical sciences for all basic and translational research. Processing and analyzing NGS data is challenging. NGS data are big, heterogeneous, sparse, and error prone. Although a plethora of tools for NGS data analysis has emerged in the past decade, (i) software development is still lagging behind data generation capabilities, and (ii) there is a 'cultural' gap between the end user and the developer. Generic software template libraries specifically developed for NGS can help in dealing with the former problem, whilst coupling template libraries with visual programming may help with the latter. Here we scrutinize the state-of-the-art low-level software libraries implemented specifically for NGS and graphical tools for NGS analytics. An ideal developing environment for NGS should be modular (with a native library interface), scalable in computational methods (i.e. serial, multithread, distributed), transparent (platform-independent), interoperable (with external software interface), and usable (via an intuitive graphical user interface). These characteristics should facilitate both the run of standardized NGS pipelines and the development of new workflows based on technological advancements or users' needs. We discuss in detail the potential of a computational framework blending generic template programming and visual programming that addresses all of the current limitations. In the long term, a proper, well-developed (although not necessarily unique) software framework will bridge the current gap between data generation and hypothesis testing. This will eventually facilitate the development of novel diagnostic tools embedded in routine healthcare.

Personalized, Shareable Geoscience Dataspaces For Simplifying Data Management and Improving Reproducibility

NASA Astrophysics Data System (ADS)

Malik, T.; Foster, I.; Goodall, J. L.; Peckham, S. D.; Baker, J. B. H.; Gurnis, M.

2015-12-01

Research activities are iterative, collaborative, and now data- and compute-intensive. Such research activities mean that even the many researchers who work in small laboratories must often create, acquire, manage, and manipulate much diverse data and keep track of complex software. They face difficult data and software management challenges, and data sharing and reproducibility are neglected. There is signficant federal investment in powerful cyberinfrastructure, in part to lesson the burden associated with modern data- and compute-intensive research. Similarly, geoscience communities are establishing research repositories to facilitate data preservation. Yet we observe a large fraction of the geoscience community continues to struggle with data and software management. The reason, studies suggest, is not lack of awareness but rather that tools do not adequately support time-consuming data life cycle activities. Through NSF/EarthCube-funded GeoDataspace project, we are building personalized, shareable dataspaces that help scientists connect their individual or research group efforts with the community at large. The dataspaces provide a light-weight multiplatform research data management system with tools for recording research activities in what we call geounits, so that a geoscientist can at any time snapshot and preserve, both for their own use and to share with the community, all data and code required to understand and reproduce a study. A software-as-a-service (SaaS) deployment model enhances usability of core components, and integration with widely used software systems. In this talk we will present the open-source GeoDataspace project and demonstrate how it is enabling reproducibility across geoscience domains of hydrology, space science, and modeling toolkits.

Post-deployment usability evaluation of a radiology workstation.

PubMed

Jorritsma, Wiard; Cnossen, Fokie; Dierckx, Rudi A; Oudkerk, Matthijs; Van Ooijen, Peter M A

2016-01-01

To determine the number, nature and severity of usability issues radiologists encounter while using a commercially available radiology workstation in clinical practice, and to assess how well the results of a pre-deployment usability evaluation of this workstation generalize to clinical practice. The usability evaluation consisted of semi-structured interviews and observations of twelve users using the workstation during their daily work. Usability issues and positive usability findings were documented. Each issue was given a severity rating and its root cause was determined. Results were compared to the results of a pre-deployment usability evaluation of the same workstation. Ninety-two usability issues were identified, ranging from issues that cause minor frustration or delay, to issues that cause significant delays, prevent users from completing tasks, or even pose a potential threat to patient safety. The results of the pre-deployment usability evaluation had limited generalizability to clinical practice. This study showed that radiologists encountered a large number and a wide variety of usability issues when using a commercially available radiology workstation in clinical practice. This underlines the need for effective usability engineering in radiology. Given the limitations of pre-deployment usability evaluation in radiology, which were confirmed by our finding that the results of a pre-deployment usability evaluation of this workstation had limited generalizability to clinical practice, it is vital that radiology workstation vendors devote significant resources to usability engineering efforts before deployment of their workstation, and to continue these efforts after the workstation is deployed in a hospital. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Software for Generating Strip Maps from SAR Data

NASA Technical Reports Server (NTRS)

Hensley, Scott; Michel, Thierry; Madsen, Soren; Chapin, Elaine; Rodriguez, Ernesto

2004-01-01

Jurassicprok is a computer program that generates strip-map digital elevation models and other data products from raw data acquired by an airborne synthetic-aperture radar (SAR) system. This software can process data from a variety of airborne SAR systems but is designed especially for the GeoSAR system, which is a dual-frequency (P- and X-band), single-pass interferometric SAR system for measuring elevation both at the bare ground surface and top of the vegetation canopy. Jurassicprok is a modified version of software developed previously for airborne-interferometric- SAR applications. The modifications were made to accommodate P-band interferometric processing, remove approximations that are not generally valid, and reduce processor-induced mapping errors to the centimeter level. Major additions and other improvements over the prior software include the following: a) A new, highly efficient multi-stage-modified wave-domain processing algorithm for accurately motion compensating ultra-wideband data; b) Adaptive regridding algorithms based on estimated noise and actual measured topography to reduce noise while maintaining spatial resolution; c) Exact expressions for height determination from interferogram data; d) Fully calibrated volumetric correlation data based on rigorous removal of geometric and signal-to-noise decorrelation terms; e) Strip range-Doppler image output in user-specified Doppler coordinates; f) An improved phase-unwrapping and absolute-phase-determination algorithm; g) A more flexible user interface with many additional processing options; h) Increased interferogram filtering options; and i) Ability to use disk space instead of random- access memory for some processing steps.

How Do We Teach Usability? An Investigation of Usability Instruction in Technical Communication

ERIC Educational Resources Information Center

Chong, Felicia

2013-01-01

This dissertation investigates the curricular implementation of usability instruction in technical communication. Though there are a plethora of publications and studies on usability in technical communication, little discussion focuses on usability instruction in the classroom or its implementation in the curriculum. Thus, this exploratory…

36 CFR § 1193.39 - Prohibited reduction of accessibility, usability, and compatibility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... accessibility, usability, and compatibility. § 1193.39 Section § 1193.39 Parks, Forests, and Public Property... Requirements for Accessibility and Usability § 1193.39 Prohibited reduction of accessibility, usability, and... accessibility, usability, or compatibility of telecommunications equipment or customer premises equipment. (b...

Increasing EHR system usability through standards: Conformance criteria in the HL7 EHR-system functional model.

PubMed

Meehan, Rebecca A; Mon, Donald T; Kelly, Kandace M; Rocca, Mitra; Dickinson, Gary; Ritter, John; Johnson, Constance M

2016-10-01

Though substantial work has been done on the usability of health information technology, improvements in electronic health record system (EHR) usability have been slow, creating frustration, distrust of EHRs and the use of potentially unsafe work-arounds. Usability standards could be part of the solution for improving EHR usability. EHR system functional requirements and standards have been used successfully in the past to specify system behavior, the criteria of which have been gradually implemented in EHR systems through certification programs and other national health IT strategies. Similarly, functional requirements and standards for usability can help address the multitude of sequelae associated with poor usability. This paper describes the evidence-based functional requirements for usability contained in the Health Level Seven (HL7) EHR System Functional Model, and the benefits of open and voluntary EHR system usability standards. Copyright © 2016 Elsevier Inc. All rights reserved.

30 CFR 57.12012 - Bare signal wires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Bare signal wires. 57.12012 Section 57.12012 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... and Underground § 57.12012 Bare signal wires. The potential on bare signal wires accessible to contact...

30 CFR 57.12012 - Bare signal wires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bare signal wires. 57.12012 Section 57.12012 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... and Underground § 57.12012 Bare signal wires. The potential on bare signal wires accessible to contact...

30 CFR 57.12012 - Bare signal wires.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Bare signal wires. 57.12012 Section 57.12012 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... and Underground § 57.12012 Bare signal wires. The potential on bare signal wires accessible to contact...

30 CFR 57.12012 - Bare signal wires.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Bare signal wires. 57.12012 Section 57.12012 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... and Underground § 57.12012 Bare signal wires. The potential on bare signal wires accessible to contact...

Supersonic Bare Metal Cluster Beams. Technical Progress Report, March 16, 1984 - April 1, 1985

DOE R&D Accomplishments Database

Smalley, R. E.

1985-01-01

There have been four major areas of concentration for the study of bare metal cluster beams: neutral cluster, chemical reactivity, cold cluster ion source development (both positive and negative), bare cluster ion ICR (ion cyclotron resonance) development, and photofragmentation studies of bare metal cluster ions.

Usability Methods for Ensuring Health Information Technology Safety: Evidence-Based Approaches. Contribution of the IMIA Working Group Health Informatics for Patient Safety.

PubMed

Borycki, E; Kushniruk, A; Nohr, C; Takeda, H; Kuwata, S; Carvalho, C; Bainbridge, M; Kannry, J

2013-01-01

Issues related to lack of system usability and potential safety hazards continue to be reported in the health information technology (HIT) literature. Usability engineering methods are increasingly used to ensure improved system usability and they are also beginning to be applied more widely for ensuring the safety of HIT applications. These methods are being used in the design and implementation of many HIT systems. In this paper we describe evidence-based approaches to applying usability engineering methods. A multi-phased approach to ensuring system usability and safety in healthcare is described. Usability inspection methods are first described including the development of evidence-based safety heuristics for HIT. Laboratory-based usability testing is then conducted under artificial conditions to test if a system has any base level usability problems that need to be corrected. Usability problems that are detected are corrected and then a new phase is initiated where the system is tested under more realistic conditions using clinical simulations. This phase may involve testing the system with simulated patients. Finally, an additional phase may be conducted, involving a naturalistic study of system use under real-world clinical conditions. The methods described have been employed in the analysis of the usability and safety of a wide range of HIT applications, including electronic health record systems, decision support systems and consumer health applications. It has been found that at least usability inspection and usability testing should be applied prior to the widespread release of HIT. However, wherever possible, additional layers of testing involving clinical simulations and a naturalistic evaluation will likely detect usability and safety issues that may not otherwise be detected prior to widespread system release. The framework presented in the paper can be applied in order to develop more usable and safer HIT, based on multiple layers of evidence.

Exploring the Usability of Mobile Apps Supporting Radiologists' Training in Diagnostic Decision Making.

PubMed

Kim, Min Soon; Aro, Michael R; Lage, Kraig J; Ingalls, Kevin L; Sindhwani, Vivek; Markey, Mia K

2016-03-01

The objective of this study was to conduct a usability evaluation of mobile apps for supporting education and training in radiologic diagnostic decision-making processes. Of 381 mobile apps available at two major stores (Google Play and iTunes), eight iOS apps were selected for laboratory-based usability tests. Six staff radiologists completed eight app-specific task sets, using a think-aloud strategy. The triangular methods approach included quantitative performance measures, System Usability Scale (SUS), and qualitative thematic analysis using heuristic usability principles of usability issues. Overall, radiologists achieved higher than 70% success, with favorable SUS scores, in completing the tasks for seven of the eight apps. However, task success rate and SUS score had a weak relation (r = 0.23), indicating that the perceived usability may not reflect the holistic usability of the app. Task analysis and self-report revealed 108 usability issues, which were condensed to 55 unique issues and categorized by nine usability themes and mapped to ten usability heuristics. Nonintuitive functionality (eg, nonintuitive or misleading labels) was the most frequent theme observed, leading to inefficient navigation. These usability findings were consistent with the 13 improvements the radiologists suggested. This study demonstrates the feasibility of usability evaluation of radiology mobile apps and suggests potential improvements in the development of radiology mobile apps. This study also suggests that proficiency with mobile devices may not be equivalent to being an expert user, proficient in using the apps. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Ten factors to consider when developing usability scenarios and tasks for health information technology.

PubMed

Russ, Alissa L; Saleem, Jason J

2018-02-01

The quality of usability testing is highly dependent upon the associated usability scenarios. To promote usability testing as part of electronic health record (EHR) certification, the Office of the National Coordinator (ONC) for Health Information Technology requires that vendors test specific capabilities of EHRs with clinical end-users and report their usability testing process - including the test scenarios used - along with the results. The ONC outlines basic expectations for usability testing, but there is little guidance in usability texts or scientific literature on how to develop usability scenarios for healthcare applications. The objective of this article is to outline key factors to consider when developing usability scenarios and tasks to evaluate computer-interface based health information technologies. To achieve this goal, we draw upon a decade of our experience conducting usability tests with a variety of healthcare applications and a wide range of end-users, to include healthcare professionals as well as patients. We discuss 10 key factors that influence scenario development: objectives of usability testing; roles of end-user(s); target performance goals; evaluation time constraints; clinical focus; fidelity; scenario-related bias and confounders; embedded probes; minimize risks to end-users; and healthcare related outcome measures. For each factor, we present an illustrative example. This article is intended to aid usability researchers and practitioners in their efforts to advance health information technologies. The article provides broad guidance on usability scenario development and can be applied to a wide range of clinical information systems and applications. Published by Elsevier Inc.

Usability flaws of medication-related alerting functions: A systematic qualitative review.

PubMed

Marcilly, Romaric; Ammenwerth, Elske; Vasseur, Francis; Roehrer, Erin; Beuscart-Zéphir, Marie-Catherine

2015-06-01

Medication-related alerting functions may include usability flaws that limit their optimal use. A first step on the way to preventing usability flaws is to understand the characteristics of these usability flaws. This systematic qualitative review aims to analyze the type of usability flaws found in medication-related alerting functions. Papers were searched via PubMed, Scopus and Ergonomics Abstracts databases, along with references lists. Paper selection, data extraction and data analysis was performed by two to three Human Factors experts. Meaningful semantic units representing instances of usability flaws were the main data extracted. They were analyzed through qualitative methods: categorization following general usability heuristics and through an inductive process for the flaws specific to medication-related alerting functions. From the 6380 papers initially identified, 26 met all eligibility criteria. The analysis of the papers identified a total of 168 instances of usability flaws that could be classified into 13 categories of usability flaws representing either violations of general usability principles (i.e. they could be found in any system, e.g. guidance and workload issues) or infractions specific to medication-related alerting functions. The latter refer to issues of low signal-to-noise ratio, incomplete content of alerts, transparency, presentation mode and timing, missing alert features, tasks and control distribution. The list of 168 instances of usability flaws of medication-related alerting functions provides a source of knowledge for checking the usability of medication-related alerting functions during their design and evaluation process and ultimately constructs evidence-based usability design principles for these functions. Copyright © 2015 Elsevier Inc. All rights reserved.

RAY-UI: A powerful and extensible user interface for RAY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baumgärtel, P., E-mail: peter.baumgaertel@helmholtz-berlin.de; Erko, A.; Schäfers, F.

2016-07-27

The RAY-UI project started as a proof-of-concept for an interactive and graphical user interface (UI) for the well-known ray tracing software RAY [1]. In the meantime, it has evolved into a powerful enhanced version of RAY that will serve as the platform for future development and improvement of associated tools. The software as of today supports nearly all sophisticated simulation features of RAY. Furthermore, it delivers very significant usability and work efficiency improvements. Beamline elements can be quickly added or removed in the interactive sequence view. Parameters of any selected element can be accessed directly and in arbitrary order. Withmore » a single click, parameter changes can be tested and new simulation results can be obtained. All analysis results can be explored interactively right after ray tracing by means of powerful integrated image viewing and graphing tools. Unlimited image planes can be positioned anywhere in the beamline, and bundles of image planes can be created for moving the plane along the beam to identify the focus position with live updates of the simulated results. In addition to showing the features and workflow of RAY-UI, we will give an overview of the underlying software architecture as well as examples for use and an outlook for future developments.« less

SimPhospho: a software tool enabling confident phosphosite assignment.

PubMed

Suni, Veronika; Suomi, Tomi; Tsubosaka, Tomoya; Imanishi, Susumu Y; Elo, Laura L; Corthals, Garry L

2018-03-27

Mass spectrometry combined with enrichment strategies for phosphorylated peptides has been successfully employed for two decades to identify sites of phosphorylation. However, unambiguous phosphosite assignment is considered challenging. Given that site-specific phosphorylation events function as different molecular switches, validation of phosphorylation sites is of utmost importance. In our earlier study we developed a method based on simulated phosphopeptide spectral libraries, which enables highly sensitive and accurate phosphosite assignments. To promote more widespread use of this method, we here introduce a software implementation with improved usability and performance. We present SimPhospho, a fast and user-friendly tool for accurate simulation of phosphopeptide tandem mass spectra. Simulated phosphopeptide spectral libraries are used to validate and supplement database search results, with a goal to improve reliable phosphoproteome identification and reporting. The presented program can be easily used together with the Trans-Proteomic Pipeline and integrated in a phosphoproteomics data analysis workflow. SimPhospho is available for Windows, Linux and Mac operating systems at https://sourceforge.net/projects/simphospho/. It is open source and implemented in C ++. A user's manual with detailed description of data analysis using SimPhospho as well as test data can be found as supplementary material of this article. Supplementary data are available at https://www.btk.fi/research/ computational-biomedicine/software/.

Smart Interpretation - Application of Machine Learning in Geological Interpretation of AEM Data

NASA Astrophysics Data System (ADS)

Bach, T.; Gulbrandsen, M. L.; Jacobsen, R.; Pallesen, T. M.; Jørgensen, F.; Høyer, A. S.; Hansen, T. M.

2015-12-01

When using airborne geophysical measurements in e.g. groundwater mapping, an overwhelming amount of data is collected. Increasingly larger survey areas, denser data collection and limited resources, combines to an increasing problem of building geological models that use all the available data in a manner that is consistent with the geologists knowledge about the geology of the survey area. In the ERGO project, funded by The Danish National Advanced Technology Foundation, we address this problem, by developing new, usable tools, enabling the geologist utilize her geological knowledge directly in the interpretation of the AEM data, and thereby handle the large amount of data, In the project we have developed the mathematical basis for capturing geological expertise in a statistical model. Based on this, we have implemented new algorithms that have been operationalized and embedded in user friendly software. In this software, the machine learning algorithm, Smart Interpretation, enables the geologist to use the system as an assistant in the geological modelling process. As the software 'learns' the geology from the geologist, the system suggest new modelling features in the data. In this presentation we demonstrate the application of the results from the ERGO project, including the proposed modelling workflow utilized on a variety of data examples.

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service.

PubMed

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

2015-04-01

To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs.

Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System.

PubMed

Marcilly, R; Ammenwerth, E; Roehrer, E; Pelayo, S; Vasseur, F; Beuscart-Zéphir, M-C

2015-08-13

Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology.

Human Factors in the Large: Experiences from Denmark, Finland and Canada in Moving Towards Regional and National Evaluations of Health Information System Usability. Contribution of the IMIA Human Factors Working Group.

PubMed

Kushniruk, A; Kaipio, J; Nieminen, M; Hyppönen, H; Lääveri, T; Nohr, C; Kanstrup, A M; Berg Christiansen, M; Kuo, M-H; Borycki, E

2014-08-15

The objective of this paper is to explore approaches to understanding the usability of health information systems at regional and national levels. Several different methods are discussed in case studies from Denmark, Finland and Canada. They range from small scale qualitative studies involving usability testing of systems to larger scale national level questionnaire studies aimed at assessing the use and usability of health information systems by entire groups of health professionals. It was found that regional and national usability studies can complement smaller scale usability studies, and that they are needed in order to understand larger trends regarding system usability. Despite adoption of EHRs, many health professionals rate the usability of the systems as low. A range of usability issues have been noted when data is collected on a large scale through use of widely distributed questionnaires and websites designed to monitor user perceptions of usability. As health information systems are deployed on a widespread basis, studies that examine systems used regionally or nationally are required. In addition, collection of large scale data on the usability of specific IT products is needed in order to complement smaller scale studies of specific systems.

Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System

PubMed Central

Ammenwerth, E.; Roehrer, E.; Pelayo, S.; Vasseur, F.; Beuscart-Zéphir, M.-C.

2015-01-01

Summary Objectives Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. Methods A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Results Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Conclusion Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology. PMID:26123906

Human Factors in the Large: Experiences from Denmark, Finland and Canada in Moving Towards Regional and National Evaluations of Health Information System Usability

PubMed Central

Kaipio, J.; Nieminen, M.; Hyppönen, H.; Lääveri, T.; Nohr, C.; Kanstrup, A. M.; Berg Christiansen, M.; Kuo, M.-H.; Borycki, E.

2014-01-01

Summary Objectives The objective of this paper is to explore approaches to understanding the usability of health information systems at regional and national levels. Methods Several different methods are discussed in case studies from Denmark, Finland and Canada. They range from small scale qualitative studies involving usability testing of systems to larger scale national level questionnaire studies aimed at assessing the use and usability of health information systems by entire groups of health professionals. Results It was found that regional and national usability studies can complement smaller scale usability studies, and that they are needed in order to understand larger trends regarding system usability. Despite adoption of EHRs, many health professionals rate the usability of the systems as low. A range of usability issues have been noted when data is collected on a large scale through use of widely distributed questionnaires and websites designed to monitor user perceptions of usability. Conclusion As health information systems are deployed on a widespread basis, studies that examine systems used regionally or nationally are required. In addition, collection of large scale data on the usability of specific IT products is needed in order to complement smaller scale studies of specific systems. PMID:25123725

Assessment of diet and physical activity of brazilian schoolchildren: usability testing of a web-based questionnaire.

PubMed

da Costa, Filipe Ferreira; Schmoelz, Camilie Pacheco; Davies, Vanessa Fernandes; Di Pietro, Patrícia Faria; Kupek, Emil; de Assis, Maria Alice Altenburg

2013-08-19

Information and communication technology (ICT) has been used with increasing frequency for the assessment of diet and physical activity in health surveys. A number of Web-based questionnaires have been developed for children and adolescents. However, their usability characteristics have scarcely been reported, despite their potential importance for improving the feasibility and validity of ICT-based methods. The objective of this study was to describe the usability evaluation of the Consumo Alimentar e Atividade Física de Escolares (CAAFE) questionnaire (Food Consumption and Physical Activity Questionnaire for schoolchildren), a new Web-based survey tool for the self-assessment of diet and physical activity by schoolchildren. A total of 114 schoolchildren aged 6 to 12 years took part in questionnaire usability testing carried out in computer classrooms at five elementary schools in the city of Florianopolis, Brazil. Schoolchildren used a personal computer (PC) equipped with software for recording what is on the computer screen and the children's speech during usability testing. Quantitative and qualitative analyses took into account objective usability metrics such as error counts and time to complete a task. Data on the main difficulties in accomplishing the task and the level of satisfaction expressed by the children were assessed by the observers using a standardized form and interviews with the children. Descriptive statistics and content analysis were used to summarize both the quantitative and the qualitative aspects of the data obtained. The mean time for completing the questionnaire was 13.7 minutes (SD 3.68). Compared to the children in 2nd or 3rd grades, those in 4th or 5th grades spent less time completing the questionnaire (median 12.4 vs 13.3 minutes, P=.022), asked for help less frequently (median 0 vs 1.0 count, P=.005), had a lower error count (median 2.0 vs 8.0 count, P<.001), and obtained a higher overall performance score (median 73.0 vs 68.0, P=.005). Children with a PC at home spent less time completing the questionnaire (median 12.3 vs 14.9 minutes, P<.001), had a lower overall error count (median 2.0 vs 9.0 count, P=.03), and had a higher performance score (median 72.0 vs 64.0, P=.005) compared to the children without a PC at home. The most common difficulty in completing the questionnaire was in using the scroll bar. The majority of children reported a positive evaluation (liked a lot or liked) for the four design elements, which were evaluated. The results of the present study provided feedback to improve the final version of the CAAFE questionnaire. Quantitative data showed minor errors and system failures, while qualitative data indicated that, overall, the children enjoyed the CAAFE questionnaire. Grade levels and PC use must be taken into account in Web-based tools designed for children.

30 CFR 57.12080 - Bare conductor guards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bare conductor guards. 57.12080 Section 57... Underground Only § 57.12080 Bare conductor guards. Trolley wires and bare power conductors shall be guarded at... conductors are less than 7 feet above the rail, they shall be guarded at all points where persons work or...

30 CFR 57.12080 - Bare conductor guards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Bare conductor guards. 57.12080 Section 57... Underground Only § 57.12080 Bare conductor guards. Trolley wires and bare power conductors shall be guarded at... conductors are less than 7 feet above the rail, they shall be guarded at all points where persons work or...

30 CFR 77.515 - Bare signal or control wires; voltage.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bare signal or control wires; voltage. 77.515... COAL MINES Electrical Equipment-General § 77.515 Bare signal or control wires; voltage. The voltage on bare signal or control wires accessible to personal contact shall not exceed 40 volts. ...

30 CFR 56.12066 - Guarding trolley wires and bare powerlines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Guarding trolley wires and bare powerlines. 56... Electricity § 56.12066 Guarding trolley wires and bare powerlines. Where metallic tools or equipment can come in contact with trolley wires or bare powerlines, the lines shall be guarded or deenergized. ...

30 CFR 56.12066 - Guarding trolley wires and bare powerlines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Guarding trolley wires and bare powerlines. 56... Electricity § 56.12066 Guarding trolley wires and bare powerlines. Where metallic tools or equipment can come in contact with trolley wires or bare powerlines, the lines shall be guarded or deenergized. ...

30 CFR 77.515 - Bare signal or control wires; voltage.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Bare signal or control wires; voltage. 77.515... COAL MINES Electrical Equipment-General § 77.515 Bare signal or control wires; voltage. The voltage on bare signal or control wires accessible to personal contact shall not exceed 40 volts. ...

30 CFR 57.12066 - Guarding trolley wires and bare powerlines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Guarding trolley wires and bare powerlines. 57... MINES Electricity Surface Only § 57.12066 Guarding trolley wires and bare powerlines. Where metallic tools or equipment can come in contact with trolley wires or bare powerlines, the lines shall be guarded...

30 CFR 57.12066 - Guarding trolley wires and bare powerlines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Guarding trolley wires and bare powerlines. 57... MINES Electricity Surface Only § 57.12066 Guarding trolley wires and bare powerlines. Where metallic tools or equipment can come in contact with trolley wires or bare powerlines, the lines shall be guarded...

Three-dimensional computational aerodynamics in the 1980's

NASA Technical Reports Server (NTRS)

Lomax, H.

1978-01-01

The future requirements for constructing codes that can be used to compute three-dimensional flows about aerodynamic shapes should be assessed in light of the constraints imposed by future computer architectures and the reality of usable algorithms that can provide practical three-dimensional simulations. On the hardware side, vector processing is inevitable in order to meet the CPU speeds required. To cope with three-dimensional geometries, massive data bases with fetch/store conflicts and transposition problems are inevitable. On the software side, codes must be prepared that: (1) can be adapted to complex geometries, (2) can (at the very least) predict the location of laminar and turbulent boundary layer separation, and (3) will converge rapidly to sufficiently accurate solutions.

CosmoQuest: A Cyber-Infrastructure for Crowdsourcing Planetary Surface Mapping and More

NASA Astrophysics Data System (ADS)

Gay, P.; Lehan, C.; Moore, J.; Bracey, G.; Gugliucci, N.

2014-04-01

The design and implementation of programs to crowdsource science presents a unique set of challenges to system architects, programmers, and designers. The CosmoQuest Citizen Science Builder (CSB) is an open source platform designed to take advantage of crowd computing and open source platforms to solve crowdsourcing problems in Planetary Science. CSB combines a clean user interface with a powerful back end to allow the quick design and deployment of citizen science sites that meet the needs of both the random Joe Public, and the detail driven Albert Professional. In this talk, the software will be overviewed, and the results of usability testing and accuracy testing with both citizen and professional scientists will be discussed.

Image Processing Diagnostics: Emphysema

NASA Astrophysics Data System (ADS)

McKenzie, Alex

2009-10-01

Currently the computerized tomography (CT) scan can detect emphysema sooner than traditional x-rays, but other tests are required to measure more accurately the amount of affected lung. CT scan images show clearly if a patient has emphysema, but is unable by visual scan alone, to quantify the degree of the disease, as it appears merely as subtle, barely distinct, dark spots on the lung. Our goal is to create a software plug-in to interface with existing open source medical imaging software, to automate the process of accurately diagnosing and determining emphysema severity levels in patients. This will be accomplished by performing a number of statistical calculations using data taken from CT scan images of several patients representing a wide range of severity of the disease. These analyses include an examination of the deviation from a normal distribution curve to determine skewness, a commonly used statistical parameter. Our preliminary results show that this method of assessment appears to be more accurate and robust than currently utilized methods which involve looking at percentages of radiodensities in air passages of the lung.

Dynamic weakening of serpentinite gouges and bare surfaces at seismic slip rates

PubMed Central

Proctor, B P; Mitchell, T M; Hirth, G; Goldsby, D; Zorzi, F; Platt, J D; Di Toro, G

2014-01-01

To investigate differences in the frictional behavior between initially bare rock surfaces of serpentinite and powdered serpentinite (“gouge”) at subseismic to seismic slip rates, we conducted single-velocity step and multiple-velocity step friction experiments on an antigorite-rich and lizardite-rich serpentinite at slip rates (V) from 0.003 m/s to 6.5 m/s, sliding displacements up to 1.6 m, and normal stresses (σn) up to 22 MPa for gouge and 97 MPa for bare surfaces. Nominal steady state friction values (μnss) in gouge at V = 1 m/s are larger than in bare surfaces for all σn tested and demonstrate a strong σn dependence; μnss decreased from 0.51 at 4.0 MPa to 0.39 at 22.4 MPa. Conversely, μnss values for bare surfaces remained ∼0.1 with increasing σn and V. Additionally, the velocity at the onset of frictional weakening and the amount of slip prior to weakening were orders of magnitude larger in gouge than in bare surfaces. Extrapolation of the normal stress dependence for μnss suggests that the behavior of antigorite gouge approaches that of bare surfaces at σn ≥ 60 MPa. X-ray diffraction revealed dehydration reaction products in samples that frictionally weakened. Microstructural analysis revealed highly localized slip zones with melt-like textures in some cases gouge experiments and in all bare surfaces experiments for V ≥ 1 m/s. One-dimensional thermal modeling indicates that flash heating causes frictional weakening in both bare surfaces and gouge. Friction values for gouge decrease at higher velocities and after longer displacements than bare surfaces because strain is more distributed. Key Points Gouge friction approaches that of bare surfaces at high normal stress Dehydration reactions and bulk melting in serpentinite in < 1 m of slip Flash heating causes dynamic frictional weakening in gouge and bare surfaces PMID:26167425

Improving Public Relations Web Sites through Usability Research.

ERIC Educational Resources Information Center

Hallahan, Kirk

2001-01-01

Argues that usability research has particular relevance for enhancing the effectiveness of websites. Examines the nature and value of usability research, and the elements of an effective website based on usability principles. (SR)

Spatial and temporal analysis of land cover changes and water quality in the Lake Issaqueena watershed, South Carolina.

PubMed

Pilgrim, C M; Mikhailova, E A; Post, C J; Hains, J J

2014-11-01

Monitoring changes in land cover and the subsequent environmental responses are essential for water quality assessment, natural resource planning, management, and policies. Over the last 75 years, the Lake Issaqueena watershed has experienced a drastic shift in land use. This study was conducted to examine the changes in land cover and the implied changes in land use that have occurred and their environmental, water quality impacts. Aerial photography of the watershed (1951, 1956, 1968, 1977, 1989, 1999, 2005, 2006, and 2009) was analyzed and classified using the geographic information system (GIS) software. Seven land cover classes were defined: evergreen, deciduous, bare ground, pasture/grassland, cultivated, and residential/other development. Water quality data, including sampling depth, water temperature, dissolved oxygen content, fecal coliform levels, inorganic nitrogen concentrations, and turbidity, were obtained from the South Carolina (SC) Department of Health and Environmental Control (SCDHEC) for two stations and analyzed for trends as they relate to land cover change. From 1951 to 2009, the watershed experienced an increase of tree cover and bare ground (+17.4 % evergreen, +62.3 % deciduous, +9.8 % bare ground) and a decrease of pasture/grassland and cultivated land (-42.6 % pasture/grassland and -57.1 % cultivated). From 2005 to 2009, there was an increase of 21.5 % in residential/other development. Sampling depth ranged from 0.1 to 0.3 m. Water temperature fluctuated corresponding to changing air temperatures, and dissolved oxygen content fluctuated as a factor of water temperature. Inorganic nitrogen content was higher from December to April possibly due to application of fertilizers prior to the growing season. Turbidity and fecal coliform bacteria levels remained relatively the same from 1962 to 2005, but a slight decline in pH can be observed at both stations. Prior to 1938, the area consisted of single-crop cotton farms; after 1938, the farms were abandoned, leaving large bare areas with highly eroded soil. Starting in 1938, Clemson reforested almost 30 % of the watershed. Currently, three fourths of the watershed is forestland, with a limited coverage of small farms and residential developments. Monitoring water quality is essential in maintaining adequate freshwater supply. Water quality monitoring focuses mainly on the collection of field data, but current water quality conditions depend on the cumulative impacts of land cover change over time.

Usability Operations on Touch Mobile Devices for Users with Autism.

PubMed

Quezada, Angeles; Juárez-Ramírez, Reyes; Jiménez, Samantha; Noriega, Alan Ramírez; Inzunza, Sergio; Garza, Arnulfo Alanis

2017-10-14

The Autistic Spectrum Disorder is a cognitive disorder that affects the cognitive and motor skills; due that, users cannot perform digital and fine motor tasks. It is necessary to create software applications that adapt to the abilities of these users. In recent years has been an increase in the research of the use of technology to support autistic users to develop their communication skills and to improve learning. However, the applications' usability for disable users is not assessed objectively as the existing models do not consider interaction operators for disable users. This article focuses on identifying the operations that can easily be performed by autistic users following the metrics of KML-GOMS, TLM and FLM. In addition, users of typical development were included in order to do a comparison between both types of users. The experiment was carried out using four applications designed for autistic users. Participants were subjects divided in two groups: level 1 and level 2 autistic users, and a group of users of typical development. During the experimentation, users performed a use case for each application; the time needed to perform each task was measured. Results show that the easiest operations for autistic users are K (Keystroke), D (Drag), Initial Act (I) and Tapping (T).

Reconfigurable Wideband Circularly Polarized Stacked Square Patch Antenna for Cognitive Radios

NASA Technical Reports Server (NTRS)

Barbosa Kortright, Miguel A.; Waldstein, Seth W.; Simons, Rainee N.

2017-01-01

An almost square patch, a square patch and a stacked square patch with corner truncation for circular polarization (CP) are researched and developed at X-band for cognitive radios. Experimental results indicate, first, that the impedance bandwidth of a CP almost square patch fed from the edge by a 50 ohm line is 1.70% and second, that of a CP square patch fed from the ground plane side by a surface launch connector is 1.87%. Third, the impedance bandwidth of a CP stacked square patch fed by a surface launch connector is 2.22%. The measured center frequency for the CP square patch fed by a surface launch connector without and with an identical stacked patch is 8.45 and 8.1017 GHz, respectively. By stacking a patch, separated by a fixed air gap of 0.254 mm, the center frequency is observed to shift by as much as 348.3 MHz. The shift in center frequency, brought about by the reconfiguring of the physical layer antenna, can be exploited in a cognitive system since it expands the usable frequency spectrum for software reconfiguration in the presence of interference. In addition, varying the fixed air gap in the stacked antenna geometry by increments of 0.254 mm further expands the usable frequency spectrum.

Using Distributed Data over HBase in Big Data Analytics Platform for Clinical Services

PubMed Central

Zamani, Hamid

2017-01-01

Big data analytics (BDA) is important to reduce healthcare costs. However, there are many challenges of data aggregation, maintenance, integration, translation, analysis, and security/privacy. The study objective to establish an interactive BDA platform with simulated patient data using open-source software technologies was achieved by construction of a platform framework with Hadoop Distributed File System (HDFS) using HBase (key-value NoSQL database). Distributed data structures were generated from benchmarked hospital-specific metadata of nine billion patient records. At optimized iteration, HDFS ingestion of HFiles to HBase store files revealed sustained availability over hundreds of iterations; however, to complete MapReduce to HBase required a week (for 10 TB) and a month for three billion (30 TB) indexed patient records, respectively. Found inconsistencies of MapReduce limited the capacity to generate and replicate data efficiently. Apache Spark and Drill showed high performance with high usability for technical support but poor usability for clinical services. Hospital system based on patient-centric data was challenging in using HBase, whereby not all data profiles were fully integrated with the complex patient-to-hospital relationships. However, we recommend using HBase to achieve secured patient data while querying entire hospital volumes in a simplified clinical event model across clinical services. PMID:29375652

Using Distributed Data over HBase in Big Data Analytics Platform for Clinical Services.

PubMed

Chrimes, Dillon; Zamani, Hamid

2017-01-01

Big data analytics (BDA) is important to reduce healthcare costs. However, there are many challenges of data aggregation, maintenance, integration, translation, analysis, and security/privacy. The study objective to establish an interactive BDA platform with simulated patient data using open-source software technologies was achieved by construction of a platform framework with Hadoop Distributed File System (HDFS) using HBase (key-value NoSQL database). Distributed data structures were generated from benchmarked hospital-specific metadata of nine billion patient records. At optimized iteration, HDFS ingestion of HFiles to HBase store files revealed sustained availability over hundreds of iterations; however, to complete MapReduce to HBase required a week (for 10 TB) and a month for three billion (30 TB) indexed patient records, respectively. Found inconsistencies of MapReduce limited the capacity to generate and replicate data efficiently. Apache Spark and Drill showed high performance with high usability for technical support but poor usability for clinical services. Hospital system based on patient-centric data was challenging in using HBase, whereby not all data profiles were fully integrated with the complex patient-to-hospital relationships. However, we recommend using HBase to achieve secured patient data while querying entire hospital volumes in a simplified clinical event model across clinical services.

Applying usability methods to identify health literacy issues: an example using a Personal Health Record.

PubMed

Monkman, Helen; Kushniruk, Andre

2013-01-01

The prevalence of consumer health information systems is increasing. However, usability and health literacy impact both the value and adoption of these systems. Health literacy and usability are closely related in that systems may not be used accurately if users cannot understand the information therein. Thus, it is imperative to focus on mitigating the demands on health literacy in consumer health information systems. This study modified two usability evaluation methods (heuristic evaluation and usability testing) to incorporate the identification of potential health literacy issues in a Personal Health Record (PHR). Heuristic evaluation is an analysis of a system performed by a usability specialist who evaluates how well the system abides by usability principles. In contrast, a usability test involves a post hoc analysis of a representative user interacting with the system. These two methods revealed several health literacy issues and suggestions to ameliorate them were made. Thus, it was demonstrated that usability methods could be successfully augmented for the purpose of investigating health literacy issues. To improve users' health knowledge, the adoption of consumer health information systems, and the accuracy of the information contained therein, it is encouraged that usability methods be applied with an added focus on health literacy.