Barriers of the Development of Web-Based Training in Agricultural Higher Education System in Iran: A Case Study of Hamadan Bu Ali Sina University, Iran

ERIC Educational Resources Information Center

Saadi, Heshmatollah; Mirzayi, Khalil; Movahedi, Reza

2016-01-01

Recently, higher education systems seek to use network-based and Internet-based information technologies in education, teaching and learning. E-learning in Iran higher education system has been started since 2003, however, its development has been very slow. The present study is a survey research. The participants of the study are faculty members,…

Assessment of Web-Based Authentication Methods in the U.S.: Comparing E-Learning Systems to Internet Healthcare Information Systems

ERIC Educational Resources Information Center

Mattord, Herbert J.

2012-01-01

Organizations continue to rely on password-based authentication methods to control access to many Web-based systems. This research study developed a benchmarking instrument intended to assess authentication methods used in Web-based information systems (IS). It developed an Authentication Method System Index (AMSI) to analyze collected data from…

A Vision-Based Driver Nighttime Assistance and Surveillance System Based on Intelligent Image Sensing Techniques and a Heterogamous Dual-Core Embedded System Architecture

PubMed Central

Chen, Yen-Lin; Chiang, Hsin-Han; Chiang, Chuan-Yen; Liu, Chuan-Ming; Yuan, Shyan-Ming; Wang, Jenq-Haur

2012-01-01

This study proposes a vision-based intelligent nighttime driver assistance and surveillance system (VIDASS system) implemented by a set of embedded software components and modules, and integrates these modules to accomplish a component-based system framework on an embedded heterogamous dual-core platform. Therefore, this study develops and implements computer vision and sensing techniques of nighttime vehicle detection, collision warning determination, and traffic event recording. The proposed system processes the road-scene frames in front of the host car captured from CCD sensors mounted on the host vehicle. These vision-based sensing and processing technologies are integrated and implemented on an ARM-DSP heterogamous dual-core embedded platform. Peripheral devices, including image grabbing devices, communication modules, and other in-vehicle control devices, are also integrated to form an in-vehicle-embedded vision-based nighttime driver assistance and surveillance system. PMID:22736956

A vision-based driver nighttime assistance and surveillance system based on intelligent image sensing techniques and a heterogamous dual-core embedded system architecture.

PubMed

Chen, Yen-Lin; Chiang, Hsin-Han; Chiang, Chuan-Yen; Liu, Chuan-Ming; Yuan, Shyan-Ming; Wang, Jenq-Haur

2012-01-01

This study proposes a vision-based intelligent nighttime driver assistance and surveillance system (VIDASS system) implemented by a set of embedded software components and modules, and integrates these modules to accomplish a component-based system framework on an embedded heterogamous dual-core platform. Therefore, this study develops and implements computer vision and sensing techniques of nighttime vehicle detection, collision warning determination, and traffic event recording. The proposed system processes the road-scene frames in front of the host car captured from CCD sensors mounted on the host vehicle. These vision-based sensing and processing technologies are integrated and implemented on an ARM-DSP heterogamous dual-core embedded platform. Peripheral devices, including image grabbing devices, communication modules, and other in-vehicle control devices, are also integrated to form an in-vehicle-embedded vision-based nighttime driver assistance and surveillance system.

An Empirical Study of Instructor Adoption of Web-Based Learning Systems

ERIC Educational Resources Information Center

Wang, Wei-Tsong; Wang, Chun-Chieh

2009-01-01

For years, web-based learning systems have been widely employed in both educational and non-educational institutions. Although web-based learning systems are emerging as a useful tool for facilitating teaching and learning activities, the number of users is not increasing as fast as expected. This study develops an integrated model of instructor…

Spendency: Students' Propensity to Use System Currency

ERIC Educational Resources Information Center

Snow, Erica L.; Allen, Laura K.; Jackson, G. Tanner; McNamara, Danielle S.

2015-01-01

Using students' process data from the game-based Intelligent Tutoring System (ITS) iSTART-ME, the current study examines students' propensity to use system currency to unlock game-based features, (i.e., referred to here as "spendency"). This study examines how spendency relates to students' interaction preferences, in-system performance,…

Educational Application of Dialogue System To Support e-Learning.

ERIC Educational Resources Information Center

Kim, Youn-Gi; Lee, Chul-Hwan; Han, Sun-Gwan

This study is on the design and implementation of an educational dialogue system to support e-learning. The learning domain to apply the dialogue system used the subject of geometry. The knowledge in the dialogue-based system for learning geometry was created and represented by XML-based AIML. The implemented system in this study can understand…

Study of systems and techniques for data base management

NASA Technical Reports Server (NTRS)

1976-01-01

Data management areas were studied to identify pertinent problems and issues that will affect future NASA data users in terms of performance and cost. Specific topics discussed include the identifications of potential NASA data users other than those normally discussed, consideration affecting the clustering of minicomputers, low cost computer system for information retrieval and analysis, the testing of minicomputer based data base management systems, ongoing work related to the use of dedicated systems for data base management, and the problems of data interchange among a community of NASA data users.

Development of Spreadsheet-Based Integrated Transaction Processing Systems and Financial Reporting Systems

NASA Astrophysics Data System (ADS)

Ariana, I. M.; Bagiada, I. M.

2018-01-01

Development of spreadsheet-based integrated transaction processing systems and financial reporting systems is intended to optimize the capabilities of spreadsheet in accounting data processing. The purpose of this study are: 1) to describe the spreadsheet-based integrated transaction processing systems and financial reporting systems; 2) to test its technical and operational feasibility. This study type is research and development. The main steps of study are: 1) needs analysis (need assessment); 2) developing spreadsheet-based integrated transaction processing systems and financial reporting systems; and 3) testing the feasibility of spreadsheet-based integrated transaction processing systems and financial reporting systems. The technical feasibility include the ability of hardware and operating systems to respond the application of accounting, simplicity and ease of use. Operational feasibility include the ability of users using accounting applications, the ability of accounting applications to produce information, and control applications of the accounting applications. The instrument used to assess the technical and operational feasibility of the systems is the expert perception questionnaire. The instrument uses 4 Likert scale, from 1 (strongly disagree) to 4 (strongly agree). Data were analyzed using percentage analysis by comparing the number of answers within one (1) item by the number of ideal answer within one (1) item. Spreadsheet-based integrated transaction processing systems and financial reporting systems integrate sales, purchases, and cash transaction processing systems to produce financial reports (statement of profit or loss and other comprehensive income, statement of changes in equity, statement of financial position, and statement of cash flows) and other reports. Spreadsheet-based integrated transaction processing systems and financial reporting systems is feasible from the technical aspects (87.50%) and operational aspects (84.17%).

The evaluation of a web-based incident reporting system.

PubMed

Kuo, Ya-Hui; Lee, Ting-Ting; Mills, Mary Etta; Lin, Kuan-Chia

2012-07-01

A Web-based reporting system is essential to report incident events anonymously and confidentially. The purpose of this study was to evaluate a Web-based reporting system in Taiwan. User satisfaction and impact of system use were evaluated through a survey answered by 249 nurses. Incident events reported in paper and electronic systems were collected for comparison purposes. Study variables included system user satisfaction, willingness to report, number of reports, severity of the events, and efficiency of the reporting process. Results revealed that senior nurses were less willing to report events, nurses on internal medicine units had higher satisfaction than others, and lowest satisfaction was related to the time it took to file a report. In addition, the Web-based reporting system was used more often than the paper system. The percentages of events reported were significantly higher in the Web-based system in laboratory, environment/device, and incidents occurring in other units, whereas the proportions of reports involving bedsores and dislocation of endotracheal tubes were decreased. Finally, moderate injury event reporting decreased, whereas minor or minimal injury event reporting increased. The study recommends that the data entry process be simplified and the network system be improved to increase user satisfaction and reporting rates.

Concept for a Satellite-Based Advanced Air Traffic Management System : Volume 1. Summary.

DOT National Transportation Integrated Search

1974-02-01

The report contains the results of studies and analyses directed toward the definition of a Satellite-Based Advanced Air Traffic Management System (SAATMS). This system is an advanced, integrated air traffic control system which is based on the use o...

Intelligent Operation and Maintenance of Micro-grid Technology and System Development

NASA Astrophysics Data System (ADS)

Fu, Ming; Song, Jinyan; Zhao, Jingtao; Du, Jian

2018-01-01

In order to achieve the micro-grid operation and management, Studying the micro-grid operation and maintenance knowledge base. Based on the advanced Petri net theory, the fault diagnosis model of micro-grid is established, and the intelligent diagnosis and analysis method of micro-grid fault is put forward. Based on the technology, the functional system and architecture of the intelligent operation and maintenance system of micro-grid are studied, and the microcomputer fault diagnosis function is introduced in detail. Finally, the system is deployed based on the micro-grid of a park, and the micro-grid fault diagnosis and analysis is carried out based on the micro-grid operation. The system operation and maintenance function interface is displayed, which verifies the correctness and reliability of the system.

New Thermal Infrared Hyperspectral Imagers

DTIC Science & Technology

2009-10-01

involve imaging systems based on both MCT and microbolometer detector . All the systems base on push-broom imaging spectrograph with transmission grating...application requirements. The studies involve imaging systems based on both MCT and microbolometer detector . All the systems base on push-broom...remote sensing imager utilizes MCT detector combined with BMC-technique (background monitoring on-chip), background suppression and temperature

Development and implementation of a web-based system to study children with malnutrition.

PubMed

Syed-Mohamad, Sharifah-Mastura

2009-01-01

To develop and implement a collective web-based system to monitor child growth in order to study children with malnutrition. The system was developed using prototyping system development methodology. The implementation was carried out using open-source technologies that include Apache Web Server, PHP scripting, and MySQL database management system. There were four datasets collected by the system: demographic data, measurement data, parent data, and food program data. The system was designed to be used by two groups of users, the clinics and the researchers. The Growth Monitor System was successfully developed and used for the study, "Geoinformation System (GIS) and Remote Sensing in Mapping of Children with Malnutrition." Data collection was implemented in public clinics from two districts in the state of Kelantan, Malaysia. The development of an integrated web-based system, Growth Monitor, for the study of children with malnutrition has been achieved. This system can be expanded to new partners who are involved in the study of children with malnutrition in other parts of Malaysia as well as other countries.

Self-Evaluated Effects of Web-Based Portfolio Assessment System for Various Student Motivation Levels

ERIC Educational Resources Information Center

Chang, Chi-Cheng

2009-01-01

The purpose of this study was to explore the self-evaluated effects of a web-based portfolio assessment system on various categories of students of motivation. The subjects for this study were the students of two computer classes in a Junior High School. The experimental group used the web-based portfolio assessment system whereas the control…

Challenge Study: A Project-Based Learning on a Wireless Communication System at Technical High School

ERIC Educational Resources Information Center

Terasawa, Ikuo

2016-01-01

The challenge study is a project based learning curriculum at Technical High School aimed at the construction of a wireless communication system. The first period was engineering issues in the construction of an artificial satellite and the second period was a positional locating system based on the general purpose wire-less device--ZigBee device.…

The View of Principals on Standards Based Evaluation Systems and Their Role as Instructional Leaders

ERIC Educational Resources Information Center

Zoll, James Allen

2014-01-01

This study examined the implementation of standards based evaluation systems, specifically Georgia's Teacher Keys Effectiveness System, affects the principals' role of instructional leader. Using a modified Delphi study, principals from a large urban/suburban school system, gave feedback on three questions: how has their role changed; are they…

A systematic review of Human Factors and Ergonomics (HFE)-based healthcare system redesign for quality of care and patient safety

PubMed Central

Xie, Anping; Carayon, Pascale

2014-01-01

Healthcare systems need to be redesigned to provide care that is safe, effective and efficient, and meets the multiple needs of patients. This systematic review examines how Human Factors and Ergonomics (HFE) is applied to redesign healthcare work systems and processes and improve quality and safety of care. We identified twelve projects representing 23 studies and addressing different physical, cognitive and organizational HFE issues in a variety of healthcare systems and care settings. Some evidence exists for the effectiveness of HFE-based healthcare system redesign in improving process and outcome measures of quality and safety of care. We assessed risk of bias in 16 studies reporting the impact of HFE-based healthcare system redesign and found varying quality across studies. Future research should further assess the impact of HFE on quality and safety of care, and clearly define the mechanisms by which HFE-based system redesign can improve quality and safety of care. Practitioner Summary Existing evidence shows that HFE-based healthcare system redesign has the potential to improve quality of care and patient safety. Healthcare organizations need to recognize the importance of HFE-based healthcare system redesign to quality of care and patient safety, and invest resources to integrate HFE in healthcare improvement activities. PMID:25323570

Review of NJ point system.

DOT National Transportation Integrated Search

2013-03-01

The purpose of this study is to investigate the comparative effectiveness of point-based versus incident-based : negligent driver monitoring systems and to explore how certain changes to the existing point-based system used in : New Jersey might impr...

Mobile Phone Based System Opportunities to Home-based Managing of Chemotherapy Side Effects.

PubMed

Davoodi, Somayeh; Mohammadzadeh, Zeinab; Safdari, Reza

2016-06-01

Applying mobile base systems in cancer care especially in chemotherapy management have remarkable growing in recent decades. Because chemotherapy side effects have significant influences on patient's lives, therefore it is necessary to take ways to control them. This research has studied some experiences of using mobile phone based systems to home-based monitor of chemotherapy side effects in cancer. In this literature review study, search was conducted with keywords like cancer, chemotherapy, mobile phone, information technology, side effects and self managing, in Science Direct, Google Scholar and Pub Med databases since 2005. Today, because of the growing trend of the cancer, we need methods and innovations such as information technology to manage and control it. Mobile phone based systems are the solutions that help to provide quick access to monitor chemotherapy side effects for cancer patients at home. Investigated studies demonstrate that using of mobile phones in chemotherapy management have positive results and led to patients and clinicians satisfactions. This study shows that the mobile phone system for home-based monitoring chemotherapy side effects works well. In result, knowledge of cancer self-management and the rate of patient's effective participation in care process improved.

Scientific Evidence-Based Effects of Hydrotherapy on Various Systems of the Body

PubMed Central

Mooventhan, A; Nivethitha, L

2014-01-01

The use of water for various treatments (hydrotherapy) is probably as old as mankind. Hydrotherapy is one of the basic methods of treatment widely used in the system of natural medicine, which is also called as water therapy, aquatic therapy, pool therapy, and balneotherapy. Use of water in various forms and in various temperatures can produce different effects on different system of the body. Many studies/reviews reported the effects of hydrotherapy only on very few systems and there is lack of studies/reviews in reporting the evidence-based effects of hydrotherapy on various systems. We performed PubMed and PubMed central search to review relevant articles in English literature based on “effects of hydrotherapy/balneotherapy” on various systems of the body. Based on the available literature this review suggests that the hydrotherapy has a scientific evidence-based effect on various systems of the body. PMID:24926444

Scientific evidence-based effects of hydrotherapy on various systems of the body.

PubMed

Mooventhan, A; Nivethitha, L

2014-05-01

The use of water for various treatments (hydrotherapy) is probably as old as mankind. Hydrotherapy is one of the basic methods of treatment widely used in the system of natural medicine, which is also called as water therapy, aquatic therapy, pool therapy, and balneotherapy. Use of water in various forms and in various temperatures can produce different effects on different system of the body. Many studies/reviews reported the effects of hydrotherapy only on very few systems and there is lack of studies/reviews in reporting the evidence-based effects of hydrotherapy on various systems. We performed PubMed and PubMed central search to review relevant articles in English literature based on "effects of hydrotherapy/balneotherapy" on various systems of the body. Based on the available literature this review suggests that the hydrotherapy has a scientific evidence-based effect on various systems of the body.

Wavelet-based compression of pathological images for telemedicine applications

NASA Astrophysics Data System (ADS)

Chen, Chang W.; Jiang, Jianfei; Zheng, Zhiyong; Wu, Xue G.; Yu, Lun

2000-05-01

In this paper, we present the performance evaluation of wavelet-based coding techniques as applied to the compression of pathological images for application in an Internet-based telemedicine system. We first study how well suited the wavelet-based coding is as it applies to the compression of pathological images, since these images often contain fine textures that are often critical to the diagnosis of potential diseases. We compare the wavelet-based compression with the DCT-based JPEG compression in the DICOM standard for medical imaging applications. Both objective and subjective measures have been studied in the evaluation of compression performance. These studies are performed in close collaboration with expert pathologists who have conducted the evaluation of the compressed pathological images and communication engineers and information scientists who designed the proposed telemedicine system. These performance evaluations have shown that the wavelet-based coding is suitable for the compression of various pathological images and can be integrated well with the Internet-based telemedicine systems. A prototype of the proposed telemedicine system has been developed in which the wavelet-based coding is adopted for the compression to achieve bandwidth efficient transmission and therefore speed up the communications between the remote terminal and the central server of the telemedicine system.

Nurses' experiences of the use of an Internet-based support system for adolescents with depressive disorders.

PubMed

Kurki, Marjo; Anttila, Minna; Koivunen, Marita; Marttunen, Mauri; Välimäki, Maritta

2018-09-01

Internet-based applications are potentially useful and effective interventions to reach and support adolescents with mental health problems. Adolescents' commitment to the use of a new Internet-based intervention is closely related to the support they receive from healthcare professionals. This study describes nurses' experiences of the use of an Internet-based support system for adolescents with depressive disorders. Qualitative descriptive study design including individual interviews with nine nurses at two psychiatric outpatient clinics. The Technology Acceptance Model (TAM) was used as the theoretical background of the study. Nurses described several benefits of using the Internet-based support system in the care of adolescents with depressive disorders if the nurses integrate it into daily nursing practices. As perceived disadvantages the nurses thought that an adolescent's mental status might be a barrier to working with the support system. Perceived enablers could be organizational support, nurses' attitudes, and technology-related factors. Nurses' attitudes were identified as a barrier to supporting adolescents' use of the Internet-based support system. The findings suggest that the implementation plan and support from the organization, including that from nurse managers, are crucial in the process of implementing a technology-based support system.

Effects of gross motor function and manual function levels on performance-based ADL motor skills of children with spastic cerebral palsy.

PubMed

Park, Myoung-Ok

2017-02-01

[Purpose] The purpose of this study was to determine effects of Gross Motor Function Classification System and Manual Ability Classification System levels on performance-based motor skills of children with spastic cerebral palsy. [Subjects and Methods] Twenty-three children with cerebral palsy were included. The Assessment of Motor and Process Skills was used to evaluate performance-based motor skills in daily life. Gross motor function was assessed using Gross Motor Function Classification Systems, and manual function was measured using the Manual Ability Classification System. [Results] Motor skills in daily activities were significantly different on Gross Motor Function Classification System level and Manual Ability Classification System level. According to the results of multiple regression analysis, children categorized as Gross Motor Function Classification System level III scored lower in terms of performance based motor skills than Gross Motor Function Classification System level I children. Also, when analyzed with respect to Manual Ability Classification System level, level II was lower than level I, and level III was lower than level II in terms of performance based motor skills. [Conclusion] The results of this study indicate that performance-based motor skills differ among children categorized based on Gross Motor Function Classification System and Manual Ability Classification System levels of cerebral palsy.

Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

ERIC Educational Resources Information Center

Acat, M. Bahaddin; Demiral, Hilmi; Kaya, Mehmet Fatih

2016-01-01

The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is "Web Based Listening Scale". In the process of the study,…

Development of a novel imaging informatics-based system with an intelligent workflow engine (IWEIS) to support imaging-based clinical trials

PubMed Central

Wang, Ximing; Liu, Brent J; Martinez, Clarisa; Zhang, Xuejun; Winstein, Carolee J

2015-01-01

Imaging based clinical trials can benefit from a solution to efficiently collect, analyze, and distribute multimedia data at various stages within the workflow. Currently, the data management needs of these trials are typically addressed with custom-built systems. However, software development of the custom- built systems for versatile workflows can be resource-consuming. To address these challenges, we present a system with a workflow engine for imaging based clinical trials. The system enables a project coordinator to build a data collection and management system specifically related to study protocol workflow without programming. Web Access to DICOM Objects (WADO) module with novel features is integrated to further facilitate imaging related study. The system was initially evaluated by an imaging based rehabilitation clinical trial. The evaluation shows that the cost of the development of system can be much reduced compared to the custom-built system. By providing a solution to customize a system and automate the workflow, the system will save on development time and reduce errors especially for imaging clinical trials. PMID:25870169

Effects of User and System Characteristics on Perceived Usefulness and Perceived Ease of Use of the Web-Based Classroom Response System

ERIC Educational Resources Information Center

Ke, Chih-Horng; Sun, Huey-Min; Yang, Yuan-Chi; Sun, Huey-Min

2012-01-01

This study explores the effect of user and system characteristics on our proposed web-based classroom response system (CRS) by a longitudinal design. The results of research are expected to understand the important factors of user and system characteristics in the web-based CRS. The proposed system can supply interactive teaching contents,…

A Data Management System for Multi-Phase Case-Control Studies

PubMed Central

Gibeau, Joanne M.; Steinfeldt, Lois C.; Stine, Mark J.; Tullis, Katherine V.; Lynch, H. Keith

1983-01-01

The design of a computerized system for the management of data in multi-phase epidemiologic case-control studies is described. Typical study phases include case-control selection, abstracting of data from medical records, and interview of study subjects or next of kin. In consultation with project personnel, requirements for the system were established: integration of data from all study phases into one data base, accurate follow-up of subjects through the study, sophisticated data editing capabilities, ready accessibility of specified programs to project personnel, and generation of current status and exception reports for project managment. SIR (Scientific Information Retrieval), a commercially available data base management system, was selected as the foundation of this system. The system forms a comprehensive data management system applicable to many types of public health research studies.

A systematic review of human factors and ergonomics (HFE)-based healthcare system redesign for quality of care and patient safety.

PubMed

Xie, Anping; Carayon, Pascale

2015-01-01

Healthcare systems need to be redesigned to provide care that is safe, effective and efficient, and meets the multiple needs of patients. This systematic review examines how human factors and ergonomics (HFE) is applied to redesign healthcare work systems and processes and improve quality and safety of care. We identified 12 projects representing 23 studies and addressing different physical, cognitive and organisational HFE issues in a variety of healthcare systems and care settings. Some evidence exists for the effectiveness of HFE-based healthcare system redesign in improving process and outcome measures of quality and safety of care. We assessed risk of bias in 16 studies reporting the impact of HFE-based healthcare system redesign and found varying quality across studies. Future research should further assess the impact of HFE on quality and safety of care, and clearly define the mechanisms by which HFE-based system redesign can improve quality and safety of care.

Rule groupings: An approach towards verification of expert systems

NASA Technical Reports Server (NTRS)

Mehrotra, Mala

1991-01-01

Knowledge-based expert systems are playing an increasingly important role in NASA space and aircraft systems. However, many of NASA's software applications are life- or mission-critical and knowledge-based systems do not lend themselves to the traditional verification and validation techniques for highly reliable software. Rule-based systems lack the control abstractions found in procedural languages. Hence, it is difficult to verify or maintain such systems. Our goal is to automatically structure a rule-based system into a set of rule-groups having a well-defined interface to other rule-groups. Once a rule base is decomposed into such 'firewalled' units, studying the interactions between rules would become more tractable. Verification-aid tools can then be developed to test the behavior of each such rule-group. Furthermore, the interactions between rule-groups can be studied in a manner similar to integration testing. Such efforts will go a long way towards increasing our confidence in the expert-system software. Our research efforts address the feasibility of automating the identification of rule groups, in order to decompose the rule base into a number of meaningful units.

A New Approach to Integrate Internet-of-Things and Software-as-a-Service Model for Logistic Systems: A Case Study

PubMed Central

Chen, Shang-Liang; Chen, Yun-Yao; Hsu, Chiang

2014-01-01

Cloud computing is changing the ways software is developed and managed in enterprises, which is changing the way of doing business in that dynamically scalable and virtualized resources are regarded as services over the Internet. Traditional manufacturing systems such as supply chain management (SCM), customer relationship management (CRM), and enterprise resource planning (ERP) are often developed case by case. However, effective collaboration between different systems, platforms, programming languages, and interfaces has been suggested by researchers. In cloud-computing-based systems, distributed resources are encapsulated into cloud services and centrally managed, which allows high automation, flexibility, fast provision, and ease of integration at low cost. The integration between physical resources and cloud services can be improved by combining Internet of things (IoT) technology and Software-as-a-Service (SaaS) technology. This study proposes a new approach for developing cloud-based manufacturing systems based on a four-layer SaaS model. There are three main contributions of this paper: (1) enterprises can develop their own cloud-based logistic management information systems based on the approach proposed in this paper; (2) a case study based on literature reviews with experimental results is proposed to verify that the system performance is remarkable; (3) challenges encountered and feedback collected from T Company in the case study are discussed in this paper for the purpose of enterprise deployment. PMID:24686728

A new approach to integrate Internet-of-things and software-as-a-service model for logistic systems: a case study.

PubMed

Chen, Shang-Liang; Chen, Yun-Yao; Hsu, Chiang

2014-03-28

Cloud computing is changing the ways software is developed and managed in enterprises, which is changing the way of doing business in that dynamically scalable and virtualized resources are regarded as services over the Internet. Traditional manufacturing systems such as supply chain management (SCM), customer relationship management (CRM), and enterprise resource planning (ERP) are often developed case by case. However, effective collaboration between different systems, platforms, programming languages, and interfaces has been suggested by researchers. In cloud-computing-based systems, distributed resources are encapsulated into cloud services and centrally managed, which allows high automation, flexibility, fast provision, and ease of integration at low cost. The integration between physical resources and cloud services can be improved by combining Internet of things (IoT) technology and Software-as-a-Service (SaaS) technology. This study proposes a new approach for developing cloud-based manufacturing systems based on a four-layer SaaS model. There are three main contributions of this paper: (1) enterprises can develop their own cloud-based logistic management information systems based on the approach proposed in this paper; (2) a case study based on literature reviews with experimental results is proposed to verify that the system performance is remarkable; (3) challenges encountered and feedback collected from T Company in the case study are discussed in this paper for the purpose of enterprise deployment.

Space station/base food system study. Volume 1: Systems design handbook

NASA Technical Reports Server (NTRS)

1970-01-01

A description is given of the approach used in a study to identify and define engineering data for a spectrum of possible items and equipment comprising potential food systems. In addition, the material presented includes: (1) the study results containing the candidate concepts considered and technical data, performance characteristics, and sketches for each of the concepts by functional area; (2) human factors considerations for crew tasks; (3) shuttle supply interface requirements; (4) special food system study areas; and (5) recommendations and conclusions based on the study results.

Evaluation of Student Models on Current Socio-Scientific Topics Based on System Dynamics

ERIC Educational Resources Information Center

Nuhoglu, Hasret

2014-01-01

This study aims to 1) enable primary school students to develop models that will help them understand and analyze a system, through a learning process based on system dynamics approach, 2) examine and evaluate students' models related to socio-scientific issues using certain criteria. The research method used is a case study. The study sample…

Using Hi-FAME (High Feedback-Assessment-Multimedia-Environment) Instructional Model in WBI: A Case Study for Biology Teacher Education.

ERIC Educational Resources Information Center

Wang, Tzu-Hua; Wang, Wei-Lung; Wang, Kuo-Hua; Huang, Shih-Chieh

The study attempted to adapt two web tools, FFS system (Frontpage Feedback System) and WATA system (Web-based Assessment and Test Analysis System), to construct a Hi-FAME (High Feedback-Assessment-Multimedia-Environment) Model in WBI (Web-based Instruction) to facilitate pre-service teacher training. Participants were 30 junior pre-service…

Improved Academic Performance and Student Perceptions of Learning through Use of a Cell Phone-Based Personal Response System

ERIC Educational Resources Information Center

Ma, Sihui; Steger, Daniel G.; Doolittle, Peter E.; Stewart, Amanda C.

2018-01-01

Personal response systems, such as clickers, have been widely used to improve the effectiveness of teaching in various classroom settings. Although hand-held clicker response systems have been the subject of multiple prior studies, few studies have focused on the use of cell phone-based personal response system (CPPRS) specifically. This study…

Figure of merit studies of beam power concepts for advanced space exploration

NASA Technical Reports Server (NTRS)

Miller, Gabriel; Kadiramangalam, Murali N.

1990-01-01

Surface to surface, millimeter wavelength beam power systems for power transmission on the lunar base were investigated. Qualitative/quantitative analyses and technology assessment of 35, 110 and 140 GHz beam power systems were conducted. System characteristics including mass, stowage volume, cost and efficiency as a function of range and power level were calculated. A simple figure of merit analysis indicates that the 35 GHz system would be the preferred choice for lunar base applications, followed closely by the 110 GHz system. System parameters of a 35 GHz beam power system appropriate for power transmission on a recent lunar base concept studied by NASA-Johnson and the necessary deployment sequence are suggested.

The efficacy and stability of an information and communication technology-based centralized monitoring system of adherence to immunosuppressive medication in kidney transplant recipients: study protocol for a randomized controlled trial.

PubMed

Jung, Hee-Yeon; Seong, Sook Jin; Choi, Ji-Young; Cho, Jang-Hee; Park, Sun-Hee; Kim, Chan-Duck; Yoon, Young-Ran; Kim, Hyung-Kee; Huh, Seung; Yoon, Se-Hee; Lee, Jong Soo; Kim, Yong-Lim

2017-10-16

Immunosuppression non-adherence in kidney transplant recipients (KTRs) not only increases the risk of medical intervention due to acute rejection and graft loss but burdens the socioeconomic system in the form of increased healthcare costs. An aggressive preemptive effort by healthcare professionals, geared to ensure adherence to immunosuppressants in KTRs, is significant and imperative. This study was designed as a prospective, open-label, multicenter, randomized controlled study aimed at evaluating the efficacy and stability of an information and communication technology (ICT)-based centralized monitoring system in boosting medication adherence in KTRs. One hundred fourteen KTRs registered throughout the year 2017 to 2018 are randomized into either the ICT-based centralized home monitoring system or to ambulatory follow-up. The planned follow-up duration is 6 months. The ICT-based centralized home monitoring system described consists of a smart pill box equipped with personal identification system, a home monitoring system, an electronic Case Report Form (eCRF) system, and a comprehensive clinical trial management system (CTMS). It alerts both patients and medical staff with texts and pill box alarms if there is a dosage/dosing time error or a missed dose. Medication adherence and transplant outcomes for the follow-up period are compared between the two groups, while patient satisfaction as well as the stability and cost-effectiveness of the ICT-based monitoring system are to be evaluated. This on-going study is expected to determine if consistent use of the ICT-based centralized monitoring system described could maximize mediation adherence and subsequently enhance transplant outcomes in KTRs. Further, it would lay the foundation for successful implementation of this ICT-based monitoring system for effective management of medication adherence in KTRs. ClinicalTrials.gov, Identifier: NCT03136588 . Registered on 20 April 2017.

Speech-based interaction with in-vehicle computers: the effect of speech-based e-mail on drivers' attention to the roadway.

PubMed

Lee, J D; Caven, B; Haake, S; Brown, T L

2001-01-01

As computer applications for cars emerge, a speech-based interface offers an appealing alternative to the visually demanding direct manipulation interface. However, speech-based systems may pose cognitive demands that could undermine driving safety. This study used a car-following task to evaluate how a speech-based e-mail system affects drivers' response to the periodic braking of a lead vehicle. The study included 24 drivers between the ages of 18 and 24 years. A baseline condition with no e-mail system was compared with a simple and a complex e-mail system in both simple and complex driving environments. The results show a 30% (310 ms) increase in reaction time when the speech-based system is used. Subjective workload ratings and probe questions also indicate that speech-based interaction introduces a significant cognitive load, which was highest for the complex e-mail system. These data show that a speech-based interface is not a panacea that eliminates the potential distraction of in-vehicle computers. Actual or potential applications of this research include design of in-vehicle information systems and evaluation of their contributions to driver distraction.

State estimation of stochastic non-linear hybrid dynamic system using an interacting multiple model algorithm.

PubMed

Elenchezhiyan, M; Prakash, J

2015-09-01

In this work, state estimation schemes for non-linear hybrid dynamic systems subjected to stochastic state disturbances and random errors in measurements using interacting multiple-model (IMM) algorithms are formulated. In order to compute both discrete modes and continuous state estimates of a hybrid dynamic system either an IMM extended Kalman filter (IMM-EKF) or an IMM based derivative-free Kalman filters is proposed in this study. The efficacy of the proposed IMM based state estimation schemes is demonstrated by conducting Monte-Carlo simulation studies on the two-tank hybrid system and switched non-isothermal continuous stirred tank reactor system. Extensive simulation studies reveal that the proposed IMM based state estimation schemes are able to generate fairly accurate continuous state estimates and discrete modes. In the presence and absence of sensor bias, the simulation studies reveal that the proposed IMM unscented Kalman filter (IMM-UKF) based simultaneous state and parameter estimation scheme outperforms multiple-model UKF (MM-UKF) based simultaneous state and parameter estimation scheme. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

A Novel Augmented Reality Navigation System for Endoscopic Sinus and Skull Base Surgery: A Feasibility Study

PubMed Central

Li, Liang; Yang, Jian; Chu, Yakui; Wu, Wenbo; Xue, Jin; Liang, Ping; Chen, Lei

2016-01-01

Objective To verify the reliability and clinical feasibility of a self-developed navigation system based on an augmented reality technique for endoscopic sinus and skull base surgery. Materials and Methods In this study we performed a head phantom and cadaver experiment to determine the display effect and accuracy of our navigational system. We compared cadaver head-based simulated operations, the target registration error, operation time, and National Aeronautics and Space Administration Task Load Index scores of our navigation system to conventional navigation systems. Results The navigation system developed in this study has a novel display mode capable of fusing endoscopic images to three-dimensional (3-D) virtual images. In the cadaver head experiment, the target registration error was 1.28 ± 0.45 mm, which met the accepted standards of a navigation system used for nasal endoscopic surgery. Compared with conventional navigation systems, the new system was more effective in terms of operation time and the mental workload of surgeons, which is especially important for less experienced surgeons. Conclusion The self-developed augmented reality navigation system for endoscopic sinus and skull base surgery appears to have advantages that outweigh those of conventional navigation systems. We conclude that this navigational system will provide rhinologists with more intuitive and more detailed imaging information, thus reducing the judgment time and mental workload of surgeons when performing complex sinus and skull base surgeries. Ultimately, this new navigational system has potential to increase the quality of surgeries. In addition, the augmented reality navigational system could be of interest to junior doctors being trained in endoscopic techniques because it could speed up their learning. However, it should be noted that the navigation system serves as an adjunct to a surgeon’s skills and knowledge, not as a substitute. PMID:26757365

A Novel Augmented Reality Navigation System for Endoscopic Sinus and Skull Base Surgery: A Feasibility Study.

PubMed

Li, Liang; Yang, Jian; Chu, Yakui; Wu, Wenbo; Xue, Jin; Liang, Ping; Chen, Lei

2016-01-01

To verify the reliability and clinical feasibility of a self-developed navigation system based on an augmented reality technique for endoscopic sinus and skull base surgery. In this study we performed a head phantom and cadaver experiment to determine the display effect and accuracy of our navigational system. We compared cadaver head-based simulated operations, the target registration error, operation time, and National Aeronautics and Space Administration Task Load Index scores of our navigation system to conventional navigation systems. The navigation system developed in this study has a novel display mode capable of fusing endoscopic images to three-dimensional (3-D) virtual images. In the cadaver head experiment, the target registration error was 1.28 ± 0.45 mm, which met the accepted standards of a navigation system used for nasal endoscopic surgery. Compared with conventional navigation systems, the new system was more effective in terms of operation time and the mental workload of surgeons, which is especially important for less experienced surgeons. The self-developed augmented reality navigation system for endoscopic sinus and skull base surgery appears to have advantages that outweigh those of conventional navigation systems. We conclude that this navigational system will provide rhinologists with more intuitive and more detailed imaging information, thus reducing the judgment time and mental workload of surgeons when performing complex sinus and skull base surgeries. Ultimately, this new navigational system has potential to increase the quality of surgeries. In addition, the augmented reality navigational system could be of interest to junior doctors being trained in endoscopic techniques because it could speed up their learning. However, it should be noted that the navigation system serves as an adjunct to a surgeon's skills and knowledge, not as a substitute.

Assessment of Teachers' Reactions to a Knowledge- and Skills-Based Pay Structure at an International School

ERIC Educational Resources Information Center

Lowe, Joel Courtney

2013-01-01

This study explores teachers' reactions to a knowledge- and skills-based pay (KSBP) system implemented in a large international school. Such systems are designed to set teacher compensation based on demonstrated professional knowledge and skills as opposed to the traditional scale based on years of experience and degrees attained. This study fills…

Electronic properties of a molecular system with Platinum

NASA Astrophysics Data System (ADS)

Ojeda, J. H.; Medina, F. G.; Becerra-Alonso, David

2017-10-01

The electronic properties are studied using a finite homogeneous molecule called Trans-platinum-linked oligo(tetraethenylethenes). This system is composed of individual molecules such as benzene rings, platinum, Phosphore and Sulfur. The mechanism for the study of the electron transport through this system is based on placing the molecule between metal contacts to control the current through the molecular system. We study this molecule based on the tight-binding approach for the calculation of the transport properties using the Landauer-Büttiker formalism and the Fischer-Lee relationship, based on a semi-analytic Green's function method within a real-space renormalization approach. Our results show a significant agreement with experimental measurements.

Toward Creating Synergy Among Policy, Procedures, and Implementation of Evidence-Based Models in Child Welfare Systems: Two Case Examples.

PubMed

Chamberlain, Patricia

2017-03-01

Over the past four to five decades, multiple randomized controlled trials have verified that preventive interventions targeting key parenting skills can have far-reaching effects on improving a diverse array of child outcomes. Further, these studies have shown that parenting skills can be taught, and they are malleable. Given these advances, prevention scientists are in a position to make solid empirically based recommendations to public child service systems on using parent-mediated interventions to optimize positive outcomes for the children and families that they serve. Child welfare systems serve some of this country's most vulnerable children and families, yet they have been slow (compared to juvenile justice and mental health systems) to adopt empirically based interventions. This paper describes two child-welfare-initiated, policy-based case studies that have sought to scale-up research-based parenting skills into the routine services that caseworkers deliver to the families that they serve. In both case studies, the child welfare system leaders worked with evaluators and model developers to tailor policy, administrative, and fiscal system practices to institutionalize and sustain evidence-based practices into usual foster care services. Descriptions of the implementations, intervention models, and preliminary results are described.

Health Information System in a Cloud Computing Context.

PubMed

Sadoughi, Farahnaz; Erfannia, Leila

2017-01-01

Healthcare as a worldwide industry is experiencing a period of growth based on health information technology. The capabilities of cloud systems make it as an option to develop eHealth goals. The main objectives of the present study was to evaluate the advantages and limitations of health information systems implementation in a cloud-computing context that was conducted as a systematic review in 2016. Science direct, Scopus, Web of science, IEEE, PubMed and Google scholar were searched according study criteria. Among 308 articles initially found, 21 articles were entered in the final analysis. All the studies had considered cloud computing as a positive tool to help advance health technology, but none had insisted too much on its limitations and threats. Electronic health record systems have been mostly studied in the fields of implementation, designing, and presentation of models and prototypes. According to this research, the main advantages of cloud-based health information systems could be categorized into the following groups: economic benefits and advantages of information management. The main limitations of the implementation of cloud-based health information systems could be categorized into the 4 groups of security, legal, technical, and human restrictions. Compared to earlier studies, the present research had the advantage of dealing with the issue of health information systems in a cloud platform. The high frequency of studies conducted on the implementation of cloud-based health information systems revealed health industry interest in the application of this technology. Security was a subject discussed in most studies due to health information sensitivity. In this investigation, some mechanisms and solutions were discussed concerning the mentioned systems, which would provide a suitable area for future scientific research on this issue. The limitations and solutions discussed in this systematic study would help healthcare managers and decision-makers take better and more efficient advantages of this technology and make better planning to adopt cloud-based health information systems.

Evaluation of a Web-based Error Reporting Surveillance System in a Large Iranian Hospital.

PubMed

Askarian, Mehrdad; Ghoreishi, Mahboobeh; Akbari Haghighinejad, Hourvash; Palenik, Charles John; Ghodsi, Maryam

2017-08-01

Proper reporting of medical errors helps healthcare providers learn from adverse incidents and improve patient safety. A well-designed and functioning confidential reporting system is an essential component to this process. There are many error reporting methods; however, web-based systems are often preferred because they can provide; comprehensive and more easily analyzed information. This study addresses the use of a web-based error reporting system. This interventional study involved the application of an in-house designed "voluntary web-based medical error reporting system." The system has been used since July 2014 in Nemazee Hospital, Shiraz University of Medical Sciences. The rate and severity of errors reported during the year prior and a year after system launch were compared. The slope of the error report trend line was steep during the first 12 months (B = 105.727, P = 0.00). However, it slowed following launch of the web-based reporting system and was no longer statistically significant (B = 15.27, P = 0.81) by the end of the second year. Most recorded errors were no-harm laboratory types and were due to inattention. Usually, they were reported by nurses and other permanent employees. Most reported errors occurred during morning shifts. Using a standardized web-based error reporting system can be beneficial. This study reports on the performance of an in-house designed reporting system, which appeared to properly detect and analyze medical errors. The system also generated follow-up reports in a timely and accurate manner. Detection of near-miss errors could play a significant role in identifying areas of system defects.

Nonlinear dynamic modeling of a simple flexible rotor system subjected to time-variable base motions

NASA Astrophysics Data System (ADS)

Chen, Liqiang; Wang, Jianjun; Han, Qinkai; Chu, Fulei

2017-09-01

Rotor systems carried in transportation system or under seismic excitations are considered to have a moving base. To study the dynamic behavior of flexible rotor systems subjected to time-variable base motions, a general model is developed based on finite element method and Lagrange's equation. Two groups of Euler angles are defined to describe the rotation of the rotor with respect to the base and that of the base with respect to the ground. It is found that the base rotations would cause nonlinearities in the model. To verify the proposed model, a novel test rig which could simulate the base angular-movement is designed. Dynamic experiments on a flexible rotor-bearing system with base angular motions are carried out. Based upon these, numerical simulations are conducted to further study the dynamic response of the flexible rotor under harmonic angular base motions. The effects of base angular amplitude, rotating speed and base frequency on response behaviors are discussed by means of FFT, waterfall, frequency response curve and orbits of the rotor. The FFT and waterfall plots of the disk horizontal and vertical vibrations are marked with multiplications of the base frequency and sum and difference tones of the rotating frequency and the base frequency. Their amplitudes will increase remarkably when they meet the whirling frequencies of the rotor system.

Cognitive Process as a Basis for Intelligent Retrieval Systems Design.

ERIC Educational Resources Information Center

Chen, Hsinchun; Dhar, Vasant

1991-01-01

Two studies of the cognitive processes involved in online document-based information retrieval were conducted. These studies led to the development of five computational models of online document retrieval which were incorporated into the design of an "intelligent" document-based retrieval system. Both the system and the broader implications of…

Towards a knowledge-based system to assist the Brazilian data-collecting system operation

NASA Technical Reports Server (NTRS)

Rodrigues, Valter; Simoni, P. O.; Oliveira, P. P. B.; Oliveira, C. A.; Nogueira, C. A. M.

1988-01-01

A study is reported which was carried out to show how a knowledge-based approach would lead to a flexible tool to assist the operation task in a satellite-based environmental data collection system. Some characteristics of a hypothesized system comprised of a satellite and a network of Interrogable Data Collecting Platforms (IDCPs) are pointed out. The Knowledge-Based Planning Assistant System (KBPAS) and some aspects about how knowledge is organized in the IDCP's domain are briefly described.

A cell-phone-based brain-computer interface for communication in daily life

NASA Astrophysics Data System (ADS)

Wang, Yu-Te; Wang, Yijun; Jung, Tzyy-Ping

2011-04-01

Moving a brain-computer interface (BCI) system from a laboratory demonstration to real-life applications still poses severe challenges to the BCI community. This study aims to integrate a mobile and wireless electroencephalogram (EEG) system and a signal-processing platform based on a cell phone into a truly wearable and wireless online BCI. Its practicality and implications in a routine BCI are demonstrated through the realization and testing of a steady-state visual evoked potential (SSVEP)-based BCI. This study implemented and tested online signal processing methods in both time and frequency domains for detecting SSVEPs. The results of this study showed that the performance of the proposed cell-phone-based platform was comparable, in terms of the information transfer rate, with other BCI systems using bulky commercial EEG systems and personal computers. To the best of our knowledge, this study is the first to demonstrate a truly portable, cost-effective and miniature cell-phone-based platform for online BCIs.

A cell-phone-based brain-computer interface for communication in daily life.

PubMed

Wang, Yu-Te; Wang, Yijun; Jung, Tzyy-Ping

2011-04-01

Moving a brain-computer interface (BCI) system from a laboratory demonstration to real-life applications still poses severe challenges to the BCI community. This study aims to integrate a mobile and wireless electroencephalogram (EEG) system and a signal-processing platform based on a cell phone into a truly wearable and wireless online BCI. Its practicality and implications in a routine BCI are demonstrated through the realization and testing of a steady-state visual evoked potential (SSVEP)-based BCI. This study implemented and tested online signal processing methods in both time and frequency domains for detecting SSVEPs. The results of this study showed that the performance of the proposed cell-phone-based platform was comparable, in terms of the information transfer rate, with other BCI systems using bulky commercial EEG systems and personal computers. To the best of our knowledge, this study is the first to demonstrate a truly portable, cost-effective and miniature cell-phone-based platform for online BCIs.

System Study at SUNY College Bookstore/Oswego

ERIC Educational Resources Information Center

DeVita, Richard; And Others

1975-01-01

A system study of the textbook ordering department is presented including systems flow chart, chart of activities, and description of operations and procedures for utilizing the computer system. Changes based on the study are noted. (JT)

Data base management system analysis and performance testing with respect to NASA requirements

NASA Technical Reports Server (NTRS)

Martin, E. A.; Sylto, R. V.; Gough, T. L.; Huston, H. A.; Morone, J. J.

1981-01-01

Several candidate Data Base Management Systems (DBM's) that could support the NASA End-to-End Data System's Integrated Data Base Management System (IDBMS) Project, later rescoped and renamed the Packet Management System (PMS) were evaluated. The candidate DBMS systems which had to run on the Digital Equipment Corporation VAX 11/780 computer system were ORACLE, SEED and RIM. Oracle and RIM are both based on the relational data base model while SEED employs a CODASYL network approach. A single data base application which managed stratospheric temperature profiles was studied. The primary reasons for using this application were an insufficient volume of available PMS-like data, a mandate to use actual rather than simulated data, and the abundance of available temperature profile data.

A Model to Assess the Behavioral Impacts of Consultative Knowledge Based Systems.

ERIC Educational Resources Information Center

Mak, Brenda; Lyytinen, Kalle

1997-01-01

This research model studies the behavioral impacts of consultative knowledge based systems (KBS). A study of graduate students explored to what extent their decisions were affected by user participation in updating the knowledge base; ambiguity of decision setting; routinization of usage; and source credibility of the expertise embedded in the…

Real-time simulation of a Doubly-Fed Induction Generator based wind power system on eMEGASimRTM Real-Time Digital Simulator

NASA Astrophysics Data System (ADS)

Boakye-Boateng, Nasir Abdulai

The growing demand for wind power integration into the generation mix prompts the need to subject these systems to stringent performance requirements. This study sought to identify the required tools and procedures needed to perform real-time simulation studies of Doubly-Fed Induction Generator (DFIG) based wind generation systems as basis for performing more practical tests of reliability and performance for both grid-connected and islanded wind generation systems. The author focused on developing a platform for wind generation studies and in addition, the author tested the performance of two DFIG models on the platform real-time simulation model; an average SimpowerSystemsRTM DFIG wind turbine, and a detailed DFIG based wind turbine using ARTEMiSRTM components. The platform model implemented here consists of a high voltage transmission system with four integrated wind farm models consisting in total of 65 DFIG based wind turbines and it was developed and tested on OPAL-RT's eMEGASimRTM Real-Time Digital Simulator.

[Medication error management climate and perception for system use according to construction of medication error prevention system].

PubMed

Kim, Myoung Soo

2012-08-01

The purpose of this cross-sectional study was to examine current status of IT-based medication error prevention system construction and the relationships among system construction, medication error management climate and perception for system use. The participants were 124 patient safety chief managers working for 124 hospitals with over 300 beds in Korea. The characteristics of the participants, construction status and perception of systems (electric pharmacopoeia, electric drug dosage calculation system, computer-based patient safety reporting and bar-code system) and medication error management climate were measured in this study. The data were collected between June and August 2011. Descriptive statistics, partial Pearson correlation and MANCOVA were used for data analysis. Electric pharmacopoeia were constructed in 67.7% of participating hospitals, computer-based patient safety reporting systems were constructed in 50.8%, electric drug dosage calculation systems were in use in 32.3%. Bar-code systems showed up the lowest construction rate at 16.1% of Korean hospitals. Higher rates of construction of IT-based medication error prevention systems resulted in greater safety and a more positive error management climate prevailed. The supportive strategies for improving perception for use of IT-based systems would add to system construction, and positive error management climate would be more easily promoted.

Transportation Air Pollution Studies (TAPS) System

DOT National Transportation Integrated Search

1974-03-01

This report describes the Transportation Air Pollution Studies (TAPS) Data Base and the Software System which has been developed in association with it. : The TAPS Data Base will be used to store the transportation air pollution data (including emiss...

Using the Cognitive Apprenticeship Web-based Argumentation System to Improve Argumentation Instruction

NASA Astrophysics Data System (ADS)

Tsai, Chun-Yen; Jack, Brady Michael; Huang, Tai-Chu; Yang, Jin-Tan

2012-08-01

This study investigated how the instruction of argumentation skills could be promoted by using an online argumentation system. This system entitled `Cognitive Apprenticeship Web-based Argumentation' (CAWA) system was based on cognitive apprenticeship model. One hundred eighty-nine fifth grade students took part in this study. A quasi-experimental design was adopted and qualitative and quantitative analyses were used to evaluate the effectiveness of this online system in measuring students' progress in learning argumentation. The results of this study showed that different teaching strategies had effects on students' use of argumentation in the topics of daily life and the concept of `vision.' When the CAWA system was employed during the instruction and practice of argumentation on these two topics, the students' argumentation performance improved. Suggestions on how the CAWA system could be used to enhance the instruction of argumentation skills in science education were also discussed.

Knowledge-based support for the participatory design and implementation of shift systems.

PubMed

Gissel, A; Knauth, P

1998-01-01

This study developed a knowledge-based software system to support the participatory design and implementation of shift systems as a joint planning process including shift workers, the workers' committee, and management. The system was developed using a model-based approach. During the 1st phase, group discussions were repeatedly conducted with 2 experts. Thereafter a structure model of the process was generated and subsequently refined by the experts in additional semistructured interviews. Next, a factual knowledge base of 1713 relevant studies was collected on the effects of shift work. Finally, a prototype of the knowledge-based system was tested on 12 case studies. During the first 2 phases of the system, important basic information about the tasks to be carried out is provided for the user. During the 3rd phase this approach uses the problem-solving method of case-based reasoning to determine a shift rota which has already proved successful in other applications. It can then be modified in the 4th phase according to the shift workers' preferences. The last 2 phases support the final testing and evaluation of the system. The application of this system has shown that it is possible to obtain shift rotas suitable to actual problems and representative of good ergonomic solutions. A knowledge-based approach seems to provide valuable support for the complex task of designing and implementing a new shift system. The separation of the task into several phases, the provision of information at all stages, and the integration of all parties concerned seem to be essential factors for the success of the application.

Satellite power systems (SPS) concept definition study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

System definition studies resulted in a further definition of the reference system using gallium arsenide solar arrays, analysis of alternative subsystem options for the reference concept, preliminary solid state microwave concept studies, and an environmental analysis of laser transmission systems. The special emphasis studies concentrated on satellite construction, satellite construction base definition, satellite construction base construction, and rectenna construction. Major emphasis in the transportation studies was put on definition of a two stage parallel burn, vertical takeoff/horizontal landing concept. The electric orbit transfer vehicle was defined in greater detail. Program definition included cost analyses and schedule definition.

Data management system for USGS/USEPA urban hydrology studies program

USGS Publications Warehouse

Doyle, W.H.; Lorens, J.A.

1982-01-01

A data management system was developed to store, update, and retrieve data collected in urban stormwater studies jointly conducted by the U.S. Geological Survey and U.S. Environmental Protection Agency in 11 cities in the United States. The data management system is used to retrieve and combine data from USGS data files for use in rainfall, runoff, and water-quality models and for data computations such as storm loads. The system is based on the data management aspect of the Statistical Analysis System (SAS) and was used to create all the data files in the data base. SAS is used for storage and retrieval of basin physiography, land-use, and environmental practices inventory data. Also, storm-event water-quality characteristics are stored in the data base. The advantages of using SAS to create and manage a data base are many with a few being that it is simple, easy to use, contains a comprehensive statistical package, and can be used to modify files very easily. Data base system development has progressed rapidly during the last two decades and the data managment system concepts used in this study reflect the advancement made in computer technology during this era. Urban stormwater data is, however, just one application for which the system can be used. (USGS)

A new costing model in hospital management: time-driven activity-based costing system.

PubMed

Öker, Figen; Özyapıcı, Hasan

2013-01-01

Traditional cost systems cause cost distortions because they cannot meet the requirements of today's businesses. Therefore, a new and more effective cost system is needed. Consequently, time-driven activity-based costing system has emerged. The unit cost of supplying capacity and the time needed to perform an activity are the only 2 factors considered by the system. Furthermore, this system determines unused capacity by considering practical capacity. The purpose of this article is to emphasize the efficiency of the time-driven activity-based costing system and to display how it can be applied in a health care institution. A case study was conducted in a private hospital in Cyprus. Interviews and direct observations were used to collect the data. The case study revealed that the cost of unused capacity is allocated to both open and laparoscopic (closed) surgeries. Thus, by using the time-driven activity-based costing system, managers should eliminate the cost of unused capacity so as to obtain better results. Based on the results of the study, hospital management is better able to understand the costs of different surgeries. In addition, managers can easily notice the cost of unused capacity and decide how many employees to be dismissed or directed to other productive areas.

Smartphone-Based Endoscope System for Advanced Point-of-Care Diagnostics: Feasibility Study

PubMed Central

Bae, Jung Kweon; Vavilin, Andrey; You, Joon S; Kim, Hyeongeun; Ryu, Seon Young; Jang, Jeong Hun

2017-01-01

Background Endoscopic technique is often applied for the diagnosis of diseases affecting internal organs and image-guidance of surgical procedures. Although the endoscope has become an indispensable tool in the clinic, its utility has been limited to medical offices or operating rooms because of the large size of its ancillary devices. In addition, the basic design and imaging capability of the system have remained relatively unchanged for decades. Objective The objective of this study was to develop a smartphone-based endoscope system capable of advanced endoscopic functionalities in a compact size and at an affordable cost and to demonstrate its feasibility of point-of-care through human subject imaging. Methods We developed and designed to set up a smartphone-based endoscope system, incorporating a portable light source, relay-lens, custom adapter, and homebuilt Android app. We attached three different types of existing rigid or flexible endoscopic probes to our system and captured the endoscopic images using the homebuilt app. Both smartphone-based endoscope system and commercialized clinical endoscope system were utilized to compare the imaging quality and performance. Connecting the head-mounted display (HMD) wirelessly, the smartphone-based endoscope system could superimpose an endoscopic image to real-world view. Results A total of 15 volunteers who were accepted into our study were captured using our smartphone-based endoscope system, as well as the commercialized clinical endoscope system. It was found that the imaging performance of our device had acceptable quality compared with that of the conventional endoscope system in the clinical setting. In addition, images captured from the HMD used in the smartphone-based endoscope system improved eye-hand coordination between the manipulating site and the smartphone screen, which in turn reduced spatial disorientation. Conclusions The performance of our endoscope system was evaluated against a commercial system in routine otolaryngology examinations. We also demonstrated and evaluated the feasibility of conducting endoscopic procedures through a custom HMD. PMID:28751302

A Distance Instructional System with Learning Performance Evaluation Mechanism: Moodle-Based Educational System Design

ERIC Educational Resources Information Center

Lee, Ying-Chen; Terashima, Nobuyoshi

2012-01-01

In this paper, a Moodle-based educational system has been constructed by providing friendly interface to fit most students in e-learning. For the website implementation, the authors take the course "Multimedia Implementation Using JAVA" as a case study. From the modified Moodle-based educational system, the browsing time of each web page for…

Virtual reality-based medical training and assessment: The multidisciplinary relationship between clinicians, educators and developers.

PubMed

Lövquist, Erik; Shorten, George; Aboulafia, Annette

2012-01-01

The current focus on patient safety and evidence-based medical education has led to an increased interest in utilising virtual reality (VR) for medical training. The development of VR-based systems require experts from different disciplines to collaborate with shared and agreed objectives throughout a system's development process. Both the development of technology as well as the incorporation and evaluation of relevant training have to be given the appropriate attention. The aim of this article is to illustrate how constructive relationships can be established between stakeholders to develop useful and usable VR-based medical training systems. This article reports a case study of two research projects that developed and evaluated a VR-based training system for spinal anaesthesia. The case study illustrates how close relationships can be established by champion clinicians leading research in this area and by closely engaging clinicians and educators in iterative prototype design throughout a system's development process. Clinicians and educators have to strive to get more involved (ideally as champions of innovation) and actively guide the development of VR-based training and assessment systems. System developers have to strive to ensure that clinicians and educators are participating constructively in the developments of such systems.

Space-based solar power conversion and delivery systems (study), engineering analysis

NASA Technical Reports Server (NTRS)

Nathan, C. A.

1975-01-01

A systems analysis of synchronous, orbit-based power generation and relay systems that could be operational in the 1990's is described along with a comparison with earth-based systems to be operational in the same time frame. Operational and economic requirements for the orbiting systems and near term research activities which will be required to assure feasibility, development, launch and operational capabilities of such systems in the post- 1990 time frame are examined.

"If we're going to change things, it has to be systemic:" systems change in children's mental health.

PubMed

Hodges, Sharon; Ferreira, Kathleen; Israel, Nathaniel

2012-06-01

Communities that undertake systems change in accordance with the system of care philosophy commit to creating new systems entities for children and adolescents with serious emotional disturbance. These new entities are values-based, voluntary, and cross-agency alliances that include formal child-serving entities, youth, and families. Describing the scope and intent of one such implementation of systems of care, a mental health administrator commented, "If we're going to change things, it has to be systemic" (B. Baxter, personal communication, December 2, 2005). This paper explores the concept of "systemic" in the context of systems of care. Systems theory is used to understand strategies of purposeful systems change undertaken by stakeholders in established system of care communities. The paper presents a conceptual model of systems change for systems of care that is grounded in data from a national study of system of care implementation (Research and Training Center for Children's Mental Health in Case Studies of system implementation: Holistic approaches to studying community-based systems of care: Study 2, University of South Florida, Louis de la Parte Florida Mental Health Institute, Research and Training Center for Children's Mental Health, Tampa, FL, 2004). The model is based on Soft Systems Methodology, an application of systems theory developed to facilitate practical action around systems change in human systems (Checkland in Systems thinking, systems practice, Wiley, Chichester, 1999). The implications of these findings to real world actions associated with systems change in systems of care are discussed.

The acid-base resistant zone in three dentin bonding systems.

PubMed

Inoue, Go; Nikaido, Toru; Foxton, Richard M; Tagami, Junji

2009-11-01

An acid-base resistant zone has been found to exist after acid-base challenge adjacent to the hybrid layer using SEM. The aim of this study was to examine the acid-base resistant zone using three different bonding systems. Dentin disks were applied with three different bonding systems, and then a resin composite was light-cured to make dentin disk sandwiches. After acid-base challenge, the polished surfaces were observed using SEM. For both one- and two-step self-etching primer systems, an acid-base resistant zone was clearly observed adjacent to the hybrid layer - but with differing appearances. For the wet bonding system, the presence of an acid-base resistant zone was unclear. This was because the self-etching primer systems etched the dentin surface mildly, such that the remaining mineral phase of dentin and the bonding agent yielded clear acid-base resistant zones. In conclusion, the acid-base resistant zone was clearly observed when self-etching primer systems were used, but not so for the wet bonding system.

Reliability analysis in interdependent smart grid systems

NASA Astrophysics Data System (ADS)

Peng, Hao; Kan, Zhe; Zhao, Dandan; Han, Jianmin; Lu, Jianfeng; Hu, Zhaolong

2018-06-01

Complex network theory is a useful way to study many real complex systems. In this paper, a reliability analysis model based on complex network theory is introduced in interdependent smart grid systems. In this paper, we focus on understanding the structure of smart grid systems and studying the underlying network model, their interactions, and relationships and how cascading failures occur in the interdependent smart grid systems. We propose a practical model for interdependent smart grid systems using complex theory. Besides, based on percolation theory, we also study the effect of cascading failures effect and reveal detailed mathematical analysis of failure propagation in such systems. We analyze the reliability of our proposed model caused by random attacks or failures by calculating the size of giant functioning components in interdependent smart grid systems. Our simulation results also show that there exists a threshold for the proportion of faulty nodes, beyond which the smart grid systems collapse. Also we determine the critical values for different system parameters. In this way, the reliability analysis model based on complex network theory can be effectively utilized for anti-attack and protection purposes in interdependent smart grid systems.

The Effects of Longitudinal Control-System Dynamics on Pilot Opinion and Response Characteristics as Determined from Flight Tests and from Ground Simulator Studies

NASA Technical Reports Server (NTRS)

Sadoff, Melvin

1958-01-01

The results of a fixed-base simulator study of the effects of variable longitudinal control-system dynamics on pilot opinion are presented and compared with flight-test data. The control-system variables considered in this investigation included stick force per g, time constant, and dead-band, or stabilizer breakout force. In general, the fairly good correlation between flight and simulator results for two pilots demonstrates the validity of fixed-base simulator studies which are designed to complement and supplement flight studies and serve as a guide in control-system preliminary design. However, in the investigation of certain problem areas (e.g., sensitive control-system configurations associated with pilot- induced oscillations in flight), fixed-base simulator results did not predict the occurrence of an instability, although the pilots noted the system was extremely sensitive and unsatisfactory. If it is desired to predict pilot-induced-oscillation tendencies, tests in moving-base simulators may be required. It was found possible to represent the human pilot by a linear pilot analog for the tracking task assumed in the present study. The criterion used to adjust the pilot analog was the root-mean-square tracking error of one of the human pilots on the fixed-base simulator. Matching the tracking error of the pilot analog to that of the human pilot gave an approximation to the variation of human-pilot behavior over a range of control-system dynamics. Results of the pilot-analog study indicated that both for optimized control-system dynamics (for poor airplane dynamics) and for a region of good airplane dynamics, the pilot response characteristics are approximately the same.

Can Learning Motivation Predict Learning Achievement? A Case Study of a Mobile Game-Based English Learning Approach

ERIC Educational Resources Information Center

Tsai, Chia-Hui; Cheng, Ching-Hsue; Yeh, Duen-Yian; Lin, Shih-Yun

2017-01-01

This study applied a quasi-experimental design to investigate the influence and predictive power of learner motivation for achievement, employing a mobile game-based English learning approach. A system called the Happy English Learning System, integrating learning material into a game-based context, was constructed and installed on mobile devices…

Systematic Review of Medical Informatics-Supported Medication Decision Making.

PubMed

Melton, Brittany L

2017-01-01

This systematic review sought to assess the applications and implications of current medical informatics-based decision support systems related to medication prescribing and use. Studies published between January 2006 and July 2016 which were indexed in PubMed and written in English were reviewed, and 39 studies were ultimately included. Most of the studies looked at computerized provider order entry or clinical decision support systems. Most studies examined decision support systems as a means of reducing errors or risk, particularly associated with medication prescribing, whereas a few studies evaluated the impact medical informatics-based decision support systems have on workflow or operations efficiency. Most studies identified benefits associated with decision support systems, but some indicate there is room for improvement.

Web-based infectious disease surveillance systems and public health perspectives: a systematic review.

PubMed

Choi, Jihye; Cho, Youngtae; Shim, Eunyoung; Woo, Hyekyung

2016-12-08

Emerging and re-emerging infectious diseases are a significant public health concern, and early detection and immediate response is crucial for disease control. These challenges have led to the need for new approaches and technologies to reinforce the capacity of traditional surveillance systems for detecting emerging infectious diseases. In the last few years, the availability of novel web-based data sources has contributed substantially to infectious disease surveillance. This study explores the burgeoning field of web-based infectious disease surveillance systems by examining their current status, importance, and potential challenges. A systematic review framework was applied to the search, screening, and analysis of web-based infectious disease surveillance systems. We searched PubMed, Web of Science, and Embase databases to extensively review the English literature published between 2000 and 2015. Eleven surveillance systems were chosen for evaluation according to their high frequency of application. Relevant terms, including newly coined terms, development and classification of the surveillance systems, and various characteristics associated with the systems were studied. Based on a detailed and informative review of the 11 web-based infectious disease surveillance systems, it was evident that these systems exhibited clear strengths, as compared to traditional surveillance systems, but with some limitations yet to be overcome. The major strengths of the newly emerging surveillance systems are that they are intuitive, adaptable, low-cost, and operated in real-time, all of which are necessary features of an effective public health tool. The most apparent potential challenges of the web-based systems are those of inaccurate interpretation and prediction of health status, and privacy issues, based on an individual's internet activity. Despite being in a nascent stage with further modification needed, web-based surveillance systems have evolved to complement traditional national surveillance systems. This review highlights ways in which the strengths of existing systems can be maintained and weaknesses alleviated to implement optimal web surveillance systems.

User requirements for NASA data base management systems. Part 1: Oceanographic discipline

NASA Technical Reports Server (NTRS)

Fujimoto, B.

1981-01-01

Generic oceanographic user requirements were collected and analyzed for use in developing a general multipurpose data base management system for future missions of the Office of Space and Terrestrial Applications (OSTA) of NASA. The collection of user requirements involved; studying the state-of-the-art technology in data base management systems; analyzing the results of related studies; formulating a viable and diverse list of scientists to be interviewed; developing a presentation format and materials; and interviewing oceanographic data users. More effective data management systems are needed to handle the increasing influx of data.

A Study on Components of Internal Control-Based Administrative System in Secondary Schools

ERIC Educational Resources Information Center

Montri, Paitoon; Sirisuth, Chaiyuth; Lammana, Preeda

2015-01-01

The aim of this study was to study the components of the internal control-based administrative system in secondary schools, and make a Confirmatory Factor Analysis (CFA) to confirm the goodness of fit of empirical data and component model that resulted from the CFA. The study consisted of three steps: 1) studying of principles, ideas, and theories…

Implementation study of wearable sensors for activity recognition systems.

PubMed

Rezaie, Hamed; Ghassemian, Mona

2015-08-01

This Letter investigates and reports on a number of activity recognition methods for a wearable sensor system. The authors apply three methods for data transmission, namely 'stream-based', 'feature-based' and 'threshold-based' scenarios to study the accuracy against energy efficiency of transmission and processing power that affects the mote's battery lifetime. They also report on the impact of variation of sampling frequency and data transmission rate on energy consumption of motes for each method. This study leads us to propose a cross-layer optimisation of an activity recognition system for provisioning acceptable levels of accuracy and energy efficiency.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yuche; Young, Stanley; Gonder, Jeff

This study estimates the range of fuel and emissions impact of an automated-vehicle (AV) based transit system that services campus-based developments, termed an automated mobility district (AMD). The study develops a framework to quantify the fuel consumption and greenhouse gas (GHG) emission impacts of a transit system comprised of AVs, taking into consideration average vehicle fleet composition, fuel consumption/GHG emission of vehicles within specific speed bins, and the average occupancy of passenger vehicles and transit vehicles. The framework is exercised using a previous mobility analysis of a personal rapid transit (PRT) system, a system which shares many attributes with envisionedmore » AV-based transit systems. Total fuel consumption and GHG emissions with and without an AMD are estimated, providing a range of potential system impacts on sustainability. The results of a previous case study based of a proposed implementation of PRT on the Kansas State University (KSU) campus in Manhattan, Kansas, serves as the basis to estimate personal miles traveled supplanted by an AMD at varying levels of service. The results show that an AMD has the potential to reduce total system fuel consumption and GHG emissions, but the amount is largely dependent on operating and ridership assumptions. The study points to the need to better understand ride-sharing scenarios and calls for future research on sustainability benefits of an AMD system at both vehicle and system levels.« less

Factors affecting and affected by user acceptance of computer-based nursing documentation: results of a two-year study.

PubMed

Ammenwerth, Elske; Mansmann, Ulrich; Iller, Carola; Eichstädter, Ronald

2003-01-01

The documentation of the nursing process is an important but often neglected part of clinical documentation. Paper-based systems have been introduced to support nursing process documentation. Frequently, however, problems such as low quality of documentation are reported. It is unclear whether computer-based documentation systems can reduce these problems and which factors influence their acceptance by users. We introduced a computer-based nursing documentation system on four wards of the University Hospitals of Heidelberg and systematically evaluated its preconditions and its effects in a pretest-posttest intervention study. For the analysis of user acceptance, we concentrated on subjective data drawn from questionnaires and interviews. A questionnaire was developed using items from published questionnaires and items that had to be developed for the special purpose of this study. The quantitative results point to two factors influencing the acceptance of a new computer-based documentation system: the previous acceptance of the nursing process and the previous amount of self-confidence when using computers. On one ward, the diverse acceptance scores heavily declined after the introduction of the nursing documentation system. Explorative qualitative analysis on this ward points to further success factors of computer-based nursing documentation systems. Our results can be used to assist the planning and introduction of computer-based nursing documentation systems. They demonstrate the importance of computer experience and acceptance of the nursing process on a ward but also point to other factors such as the fit between nursing workflow and the functionality of a nursing documentation system.

Expert operator's associate: A knowledge based system for spacecraft control

NASA Technical Reports Server (NTRS)

Nielsen, Mogens; Grue, Klaus; Lecouat, Francois

1991-01-01

The Expert Operator's Associate (EOA) project is presented which studies the applicability of expert systems for day-to-day space operations. A prototype expert system is developed, which operates on-line with an existing spacecraft control system at the European Space Operations Centre, and functions as an 'operator's assistant' in controlling satellites. The prototype is demonstrated using an existing real-time simulation model of the MARECS-B2 telecommunication satellite. By developing a prototype system, the extent to which reliability and effectivens of operations can be enhanced by AI based support is examined. In addition the study examines the questions of acquisition and representation of the 'knowledge' for such systems, and the feasibility of 'migration' of some (currently) ground-based functions into future spaceborne autonomous systems.

Web-Based Evaluation System for Learning Management Systems

ERIC Educational Resources Information Center

Momani, Alaa

2010-01-01

E-learning systems have become an issue in recent years. A learning management system (LMS) is an electronic environment helps the educational society to communicate, exchange information, manage, and schedule the learning process. This study has provided a web-based evaluation system that may help the users to choose the convenient system…

Proof of Concept in Disrupted Tactical Networking

DTIC Science & Technology

2017-09-01

because of the risk of detection. In this study , we design projectile-based mesh networking prototypes as one potential type of short-living network...to communicate because of the risk of detection. In this study , we design projectile-based mesh networking prototypes as one potential type of short...reader with a background in systems-theory. This study is designed using systems theory and uses systems theory as a lens through which to observe

Distributed Deliberative Recommender Systems

NASA Astrophysics Data System (ADS)

Recio-García, Juan A.; Díaz-Agudo, Belén; González-Sanz, Sergio; Sanchez, Lara Quijano

Case-Based Reasoning (CBR) is one of most successful applied AI technologies of recent years. Although many CBR systems reason locally on a previous experience base to solve new problems, in this paper we focus on distributed retrieval processes working on a network of collaborating CBR systems. In such systems, each node in a network of CBR agents collaborates, arguments and counterarguments its local results with other nodes to improve the performance of the system's global response. We describe D2ISCO: a framework to design and implement deliberative and collaborative CBR systems that is integrated as a part of jcolibritwo an established framework in the CBR community. We apply D2ISCO to one particular simplified type of CBR systems: recommender systems. We perform a first case study for a collaborative music recommender system and present the results of an experiment of the accuracy of the system results using a fuzzy version of the argumentation system AMAL and a network topology based on a social network. Besides individual recommendation we also discuss how D2ISCO can be used to improve recommendations to groups and we present a second case of study based on the movie recommendation domain with heterogeneous groups according to the group personality composition and a group topology based on a social network.

Document Indexing for Image-Based Optical Information Systems.

ERIC Educational Resources Information Center

Thiel, Thomas J.; And Others

1991-01-01

Discussion of image-based information retrieval systems focuses on indexing. Highlights include computerized information retrieval; multimedia optical systems; optical mass storage and personal computers; and a case study that describes an optical disk system which was developed to preserve, access, and disseminate military documents. (19…

Development of Adaptive Kanji Learning System for Mobile Phone

ERIC Educational Resources Information Center

Li, Mengmeng; Ogata, Hiroaki; Hou, Bin; Hashimoto, Satoshi; Liu, Yuqin; Uosaki, Noriko; Yano, Yoneo

2010-01-01

This paper describes an adaptive learning system based on mobile phone email to support the study of Japanese Kanji. In this study, the main emphasis is on using the adaptive learning to resolve one common problem of the mobile-based email or SMS language learning systems. To achieve this goal, the authors main efforts focus on three aspects:…

Shared Values as Anchors of a Learning Community: A Case Study in Information Systems Design

ERIC Educational Resources Information Center

Giordano, Daniela

2004-01-01

This paper examines the role in both individual and organizational learning of the system of values sustained by a community undertaking a design task. The discussion is based on the results of a longitudinal study of a community of novice information system designers supported by a Web-based shared design memory which allows reuse of design…

Four Case Studies, Six Years Later: Developing System Thinking Skills in Junior High School and Sustaining Them over Time

ERIC Educational Resources Information Center

Ben-Zvi-Assaraf, Orit; Orion, Nir

2010-01-01

This study examines the process by which system thinking perceptions develop within the context of a water cycle curriculum. Four junior high school students undergoing an especially designed inquiry-based intervention were closely observed before, during, immediately after, and 6 years after completing a year long systems-based learning program.…

Study on key technologies of vehicle networking system platform for electric automobiles based on micro-service

NASA Astrophysics Data System (ADS)

Ye, Fei

2018-04-01

With the rapid increase of electric automobiles and charging piles, the elastic expansion and online rapid upgrade were required for the vehicle networking system platform (system platform for short). At present, it is difficult to meet the operation needs due to the traditional huge rock architecture used by the system platform. This paper studied the system platform technology architecture based on "cloud platform +micro-service" to obtain a new generation of vehicle networking system platform with the combination of elastic expansion and application, thus significantly improving the service operation ability of system.

Accelerator-based conversion (ABC) of weapons plutonium: Plant layout study and related design issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cowell, B.S.; Fontana, M.H.; Krakowski, R.A.

1995-04-01

In preparation for and in support of a detailed R and D Plan for the Accelerator-Based Conversion (ABC) of weapons plutonium, an ABC Plant Layout Study was conducted at the level of a pre-conceptual engineering design. The plant layout is based on an adaptation of the Molten-Salt Breeder Reactor (MSBR) detailed conceptual design that was completed in the early 1070s. Although the ABC Plant Layout Study included the Accelerator Equipment as an essential element, the engineering assessment focused primarily on the Target; Primary System (blanket and all systems containing plutonium-bearing fuel salt); the Heat-Removal System (secondary-coolant-salt and supercritical-steam systems); Chemicalmore » Processing; Operation and Maintenance; Containment and Safety; and Instrumentation and Control systems. Although constrained primarily to a reflection of an accelerator-driven (subcritical) variant of MSBR system, unique features and added flexibilities of the ABC suggest improved or alternative approaches to each of the above-listed subsystems; these, along with the key technical issues in need of resolution through a detailed R&D plan for ABC are described on the bases of the ``strawman`` or ``point-of-departure`` plant layout that resulted from this study.« less

Food System Trade Study for a Near-Term Mars Mission

NASA Technical Reports Server (NTRS)

Levri, Julie; Luna, Bernadette (Technical Monitor)

2000-01-01

This paper evaluates several food system options for a near-term Mars mission, based on plans for the 120-day BIO-Plex test. Food systems considered in the study are based on the International Space Station (ISS) Assembly Phase and Assembly Complete food systems. The four systems considered are: 1) ISS assembly phase food system (US portion) with individual packaging without salad production; 2) ISS assembly phase food system (US portion) with individual packaging, with salad production; 3) ISS assembly phase food system (US portion) with bulk packaging, with salad production; 4) ISS assembly complete food system (US portion) with bulk packaging with salad and refrigeration/freezing. The food system options are assessed using equivalent system mass (ESM), which evaluates each option based upon the mass, volume, power, cooling and crewtime requirements that are associated with each food system option. However, since ESM is unable to elucidate the differences in psychological benefits between the food systems, a qualitative evaluation of each option is also presented.

Study of fault tolerant software technology for dynamic systems

NASA Technical Reports Server (NTRS)

Caglayan, A. K.; Zacharias, G. L.

1985-01-01

The major aim of this study is to investigate the feasibility of using systems-based failure detection isolation and compensation (FDIC) techniques in building fault-tolerant software and extending them, whenever possible, to the domain of software fault tolerance. First, it is shown that systems-based FDIC methods can be extended to develop software error detection techniques by using system models for software modules. In particular, it is demonstrated that systems-based FDIC techniques can yield consistency checks that are easier to implement than acceptance tests based on software specifications. Next, it is shown that systems-based failure compensation techniques can be generalized to the domain of software fault tolerance in developing software error recovery procedures. Finally, the feasibility of using fault-tolerant software in flight software is investigated. In particular, possible system and version instabilities, and functional performance degradation that may occur in N-Version programming applications to flight software are illustrated. Finally, a comparative analysis of N-Version and recovery block techniques in the context of generic blocks in flight software is presented.

Automated knowledge generation

NASA Technical Reports Server (NTRS)

Myler, Harley R.; Gonzalez, Avelino J.

1988-01-01

The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

Prototype of smart office system using based security system

NASA Astrophysics Data System (ADS)

Prasetyo, T. F.; Zaliluddin, D.; Iqbal, M.

2018-05-01

Creating a new technology in the modern era gives a positive impact on business and industry. Internet of Things (IoT) as a new communication technology is very useful in realizing smart systems such as: smart home, smart office, smart parking and smart city. This study presents a prototype of the smart office system which was designed as a security system based on IoT. Smart office system development method used waterfall model. IoT-based smart office system used platform (project builder) cayenne so that. The data can be accessed and controlled through internet network from long distance. Smart office system used arduino mega 2560 microcontroller as a controller component. In this study, Smart office system is able to detect threats of dangerous objects made from metals, earthquakes, fires, intruders or theft and perform security monitoring outside the building by using raspberry pi cameras on autonomous robots in real time to the security guard.

A Systems Study to Determine the Attractiveness of Solar System Bodies and Sites for Eventual Human Exploration

NASA Technical Reports Server (NTRS)

Andringa, Jason M.; Gray, Andrew A.

2005-01-01

A pre-phase A idea-generation team at the Jet Propulsion Laboratory (JPL), has conducted a study to rank all locations in the solar system based on attractiveness for human exploration. The process used to perform the study was composed of the following primary steps: determination of criteria (including value, cost, and risk criteria) upon which to rate sites in the solar system; weighting of the criteria based upon importance to eventual human exploration; selection of sites to consider and assignment of team members to the task of advocating the benefits of particular sites; rating the sites in both the short- and longterm based on team member presentations and team discussions; compilation of a score based on criteria weights and individual ratings. Finally a comparison of the total scores of different sites was completed to determine a ranking of all the bodies and sites in the solar system. Sensitivity analysis was also performed to determine how weightings affect the rankings.

9: ADAPTATION OF PREGNANCY RISK ASSESSMENT MONITORING SYSTEM (PRAMS) AND PROVIDE A MODEL ON IT

PubMed Central

Kharaghani, Roghieh; Shariati, Mohammad; Keramat, Afsaneh; Yunesian, Masud; Moghisi, Alireza

2017-01-01

Background and aims A surveillance system helps to detect epidemics and the pattern of the problems incidence in the community and it is essential part of evidence based decision making process. This study aimed to adapt of PRAMS and provide a model on it. Methods This study was performed in 7 steps as follows: Surveillance systems in pregnancy were reviewed and appropriate system was selected for Iran by nominal group technique. Two comparative studies were conducted to determine the similarities and differences between Iran and the selected community. PRAMS method and system were adapted based on the results of the comparative studies and experts opinions. The study tool was adapted. A field trial was conducted to assess adapted PRAMS feasibility based on TELOS (technical, economic, legal, operational, and schedule) model in the city of Shahriar, located in the west of Tehran, and to compare data collection methods. Then, based on the results and consultation with related executive managers, the final model of PRAMS was suggested for Iranian health system. Results Review of the surveillance systems in pregnancy, identified six models. The results of the nominal group technique showed that, the appropriate model for Iran is PRAMS. Based on the comparative studies and expert opinions, the appropriate system and method for program was as follows: the sampling frame was composed of data in thyroid screening forms and hospital records, the sampling method was systematic, data collection methods were home and phone based surveys, and participants were women within 2 to 6 months postpartum who had a live or still birth. The study tool was adapted. Thirty-seven health volunteers collected the data in this study (technical feasibility). Any home based completed questionnaire cost 2.45 and a phone cost 1.89 USD. Many indices were achieved from the study, which were worth much more than the expenses (economic feasibility). The project was consistent with legal requirements (legal feasibility). There was no statistically significant differences in mother's participation rate between phone (90.9%) and home visit (92.8%) groups and about 90.8% of different sections of the questionnaire were completed (operational feasibility). All data collection processes took 35 days (schedule feasibility). Based on the study results, the appropriate model of surveillance system was suggested with the goals of reducing infant morbidity and mortality and promoting maternal health by influencing maternal and child health programs, and maternal behaviors during pregnancy and early infancy. Conclusion The adapted PRAMS could be considered feasible in Iran and may offer a potential solution to some data deficits in maternal and child health indicators. Moreover, by monitoring pregnancy risks and outcomes, we can assess, analyses, and modify the current prenatal care program through PRAMS widespread and periodic implementation.

Model-Based Prognostics of Hybrid Systems

NASA Technical Reports Server (NTRS)

Daigle, Matthew; Roychoudhury, Indranil; Bregon, Anibal

2015-01-01

Model-based prognostics has become a popular approach to solving the prognostics problem. However, almost all work has focused on prognostics of systems with continuous dynamics. In this paper, we extend the model-based prognostics framework to hybrid systems models that combine both continuous and discrete dynamics. In general, most systems are hybrid in nature, including those that combine physical processes with software. We generalize the model-based prognostics formulation to hybrid systems, and describe the challenges involved. We present a general approach for modeling hybrid systems, and overview methods for solving estimation and prediction in hybrid systems. As a case study, we consider the problem of conflict (i.e., loss of separation) prediction in the National Airspace System, in which the aircraft models are hybrid dynamical systems.

The 1980 Large space systems technology. Volume 2: Base technology

NASA Technical Reports Server (NTRS)

Kopriver, F., III (Compiler)

1981-01-01

Technology pertinent to large antenna systems, technology related to large space platform systems, and base technology applicable to both antenna and platform systems are discussed. Design studies, structural testing results, and theoretical applications are presented with accompanying validation data. A total systems approach including controls, platforms, and antennas is presented as a cohesive, programmatic plan for large space systems.

A web-based clinical trial management system for a sham-controlled multicenter clinical trial in depression.

PubMed

Durkalski, Valerie; Wenle Zhao; Dillon, Catherine; Kim, Jaemyung

2010-04-01

Clinical trial investigators and sponsors invest vast amounts of resources and energy into conducting trials and often face daily challenges with data management, project management, and data quality control. Rather than waiting months for study progress reports, investigators need the ability to use real-time data for the coordination and management of study activities across all study team members including site investigators, oversight committees, data and safety monitoring boards, and medical safety monitors. Web-based data management systems are beginning to meet this need but what distinguishes one system from the other are user needs/requirements and cost. To illustrate the development and implementation of a web-based data and project management system for a multicenter clinical trial designed to test the superiority of repeated transcranial magnetic stimulation versus sham for the treatment of patients with major depression. The authors discuss the reasons for not using a commercially available system for this study and describe the approach to developing their own web-based system for the OPT-TMS study. Timelines, effort, system architecture, and lessons learned are shared with the hope that this information will direct clinical trial researchers and software developers towards more efficient, user-friendly systems. The developers use a combination of generic and custom application code to allow for the flexibility to adapt the system to the needs of the study. Features of the system include: central participant registration and randomization; secure data entry at the site; participant progress/study calendar; safety data reporting; device accounting; monitor verification; and user-configurable generic reports and built-in customized reports. Hard coding was more time-efficient to address project-specific issues compared with the effort of creating a generic code application. As a consequence of this strategy, the required maintenance of the system is increased and the value of using this system for other trials is reduced. Web-based central computerized systems offer time-saving, secure options for managing clinical trial data. The choice of a commercially available system or an internally developed system is determined by the requirements of the study and users. Pros and cons to both approaches were discussed. If the intention is to use the system for various trials (single and multi-center, phases I-III) across various therapeutic areas, then the overall design should be a generic structure that simplifies the general application with minimal loss of functionality.

Identifying and individuating cognitive systems: a task-based distributed cognition alternative to agent-based extended cognition.

PubMed

Davies, Jim; Michaelian, Kourken

2016-08-01

This article argues for a task-based approach to identifying and individuating cognitive systems. The agent-based extended cognition approach faces a problem of cognitive bloat and has difficulty accommodating both sub-individual cognitive systems ("scaling down") and some supra-individual cognitive systems ("scaling up"). The standard distributed cognition approach can accommodate a wider variety of supra-individual systems but likewise has difficulties with sub-individual systems and faces the problem of cognitive bloat. We develop a task-based variant of distributed cognition designed to scale up and down smoothly while providing a principled means of avoiding cognitive bloat. The advantages of the task-based approach are illustrated by means of two parallel case studies: re-representation in the human visual system and in a biomedical engineering laboratory.

Clinician search behaviors may be influenced by search engine design.

PubMed

Lau, Annie Y S; Coiera, Enrico; Zrimec, Tatjana; Compton, Paul

2010-06-30

Searching the Web for documents using information retrieval systems plays an important part in clinicians' practice of evidence-based medicine. While much research focuses on the design of methods to retrieve documents, there has been little examination of the way different search engine capabilities influence clinician search behaviors. Previous studies have shown that use of task-based search engines allows for faster searches with no loss of decision accuracy compared with resource-based engines. We hypothesized that changes in search behaviors may explain these differences. In all, 75 clinicians (44 doctors and 31 clinical nurse consultants) were randomized to use either a resource-based or a task-based version of a clinical information retrieval system to answer questions about 8 clinical scenarios in a controlled setting in a university computer laboratory. Clinicians using the resource-based system could select 1 of 6 resources, such as PubMed; clinicians using the task-based system could select 1 of 6 clinical tasks, such as diagnosis. Clinicians in both systems could reformulate search queries. System logs unobtrusively capturing clinicians' interactions with the systems were coded and analyzed for clinicians' search actions and query reformulation strategies. The most frequent search action of clinicians using the resource-based system was to explore a new resource with the same query, that is, these clinicians exhibited a "breadth-first" search behaviour. Of 1398 search actions, clinicians using the resource-based system conducted 401 (28.7%, 95% confidence interval [CI] 26.37-31.11) in this way. In contrast, the majority of clinicians using the task-based system exhibited a "depth-first" search behavior in which they reformulated query keywords while keeping to the same task profiles. Of 585 search actions conducted by clinicians using the task-based system, 379 (64.8%, 95% CI 60.83-68.55) were conducted in this way. This study provides evidence that different search engine designs are associated with different user search behaviors.

DISTRIBUTED GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEM EMISSION OFFSET ASSESSMENT: STATISTICAL TEST OF SIMULATED- AND MEASURED-BASED DATA

EPA Science Inventory

This study assessed the pollutant emission offset potential of distributed grid-connected photovoltaic (PV) power systems. Computer-simulated performance results were utilized for 211 PV systems located across the U.S. The PV systems' monthly electrical energy outputs were based ...

The Effect of Online Systems Analysis Training on Aerospace Industry Business Performance: A Qualitative Study

ERIC Educational Resources Information Center

Burk, Erlan

2012-01-01

Aerospace companies needed additional research on technology-based training to verify expectations when enhancing human capital through online systems analysis training. The research for online systems analysis training provided aerospace companies a means to verify expectations for systems analysis technology-based training on business…

UMCS feasibility study for Fort George G. Meade volume 1. Feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-12-01

Fort George G. Meade selected 83 buildings, from the approximately 1,500 buildings on the base to be included in the UMCS Feasibility Study. The purpose of the study is to evaluate the feasibility of replacing the existing analog based Energy Monitoring and Control System (EMCS) with a new distributed process Monitoring and Control System (UMCS).

Designing an Adaptive Web-Based Learning System Based on Students' Cognitive Styles Identified Online

ERIC Educational Resources Information Center

Lo, Jia-Jiunn; Chan, Ya-Chen; Yeh, Shiou-Wen

2012-01-01

This study developed an adaptive web-based learning system focusing on students' cognitive styles. The system is composed of a student model and an adaptation model. It collected students' browsing behaviors to update the student model for unobtrusively identifying student cognitive styles through a multi-layer feed-forward neural network (MLFF).…

Adaptation Provisioning with Respect to Learning Styles in a Web-Based Educational System: An Experimental Study

ERIC Educational Resources Information Center

Popescu, E.

2010-01-01

Personalized instruction is seen as a desideratum of today's e-learning systems. The focus of this paper is on those platforms that use learning styles as personalization criterion called learning style-based adaptive educational systems. The paper presents an innovative approach based on an integrative set of learning preferences that alleviates…

The Effectiveness of Using Cloud-Based Cross-Device IRS to Support Classical Chinese Learning

ERIC Educational Resources Information Center

Wang, Yi-Hsuan

2017-01-01

The purpose of the present study was to examine the effects of integrating a cloud-based cross-device interactive response system (CCIRS) on enhancing students' classical Chinese learning. The system is a cloud-based IRS system which provides instructors and learners with an environment in which to achieve immediate interactive learning and…

Formal Verification at System Level

NASA Astrophysics Data System (ADS)

Mazzini, S.; Puri, S.; Mari, F.; Melatti, I.; Tronci, E.

2009-05-01

System Level Analysis calls for a language comprehensible to experts with different background and yet precise enough to support meaningful analyses. SysML is emerging as an effective balance between such conflicting goals. In this paper we outline some the results obtained as for SysML based system level functional formal verification by an ESA/ESTEC study, with a collaboration among INTECS and La Sapienza University of Roma. The study focuses on SysML based system level functional requirements techniques.

Determining Barriers and Facilitators Associated With Willingness to Use a Personal Health Information Management System to Support Worksite Wellness Programs.

PubMed

Neyens, David M; Childers, Ashley Kay

2017-07-01

To determine the barriers and facilitators associated with willingness to use personal health information management (PHIM) systems to support an existing worksite wellness program (WWP). The study design involved a Web-based survey. The study setting was a regional hospital. Hospital employees comprised the study subjects. Willingness, barriers, and facilitators associated with PHIM were measured. Bivariate logit models were used to model two binary dependent variables. One model predicted the likelihood of believing PHIM systems would positively affect overall health and willingness to use. Another predicted the likelihood of worrying about online security and not believing PHIM systems would benefit health goals. Based on 333 responses, believing PHIM systems would positively affect health was highly associated with willingness to use PHIM systems (p < .01). Those comfortable online were 7.22 times more willing to use PHIM systems. Participants in exercise-based components of WWPs were 3.03 times more likely to be willing to use PHIM systems. Those who worried about online security were 5.03 times more likely to believe PHIM systems would not help obtain health goals. Comfort with personal health information online and exercise-based WWP experience was associated with willingness to use PHIM systems. However, nutrition-based WWPs did not have similar effects. Implementation barriers relate to technology anxiety and trust in security, as well as experience with specific WWP activities. Identifying differences between WWP components and addressing technology concerns before implementation of PHIM systems into WWPs may facilitate improved adoption and usage.

Integration of Evidence into a Detailed Clinical Model-based Electronic Nursing Record System

PubMed Central

Park, Hyeoun-Ae; Jeon, Eunjoo; Chung, Eunja

2012-01-01

Objectives The purpose of this study was to test the feasibility of an electronic nursing record system for perinatal care that is based on detailed clinical models and clinical practice guidelines in perinatal care. Methods This study was carried out in five phases: 1) generating nursing statements using detailed clinical models; 2) identifying the relevant evidence; 3) linking nursing statements with the evidence; 4) developing a prototype electronic nursing record system based on detailed clinical models and clinical practice guidelines; and 5) evaluating the prototype system. Results We first generated 799 nursing statements describing nursing assessments, diagnoses, interventions, and outcomes using entities, attributes, and value sets of detailed clinical models for perinatal care which we developed in a previous study. We then extracted 506 recommendations from nine clinical practice guidelines and created sets of nursing statements to be used for nursing documentation by grouping nursing statements according to these recommendations. Finally, we developed and evaluated a prototype electronic nursing record system that can provide nurses with recommendations for nursing practice and sets of nursing statements based on the recommendations for guiding nursing documentation. Conclusions The prototype system was found to be sufficiently complete, relevant, useful, and applicable in terms of content, and easy to use and useful in terms of system user interface. This study has revealed the feasibility of developing such an ENR system. PMID:22844649

Calcium silicate-based drug delivery systems.

PubMed

Zhu, Ying-Jie; Guo, Xiao-Xuan; Sham, Tsun-Kong

2017-02-01

Compared with other inorganic materials such as silica, metal oxides, noble metals and carbon, calcium silicate-based materials, especially nanostructured calcium silicate materials, have high biocompatibility, bioactivity and biodegradability, high specific surface area, nanoporous/hollow structure, high drug-loading capacity, pH-responsive drug release behavior and desirable drug release properties, and thus they are promising for the application in drug delivery. Calcium silicate-based drug delivery systems have a long drug-release time, which can significantly prolong the therapeutic effect of drugs. Another advantage of calcium silicate-based drug delivery systems is their pH-responsive drug release property, which can act as an ideal platform for targeted drug delivery. Areas covered: In recent years, studies have been carried out on calcium silicate-based drug delivery systems, and important results and insights have been documented. This article is not intended to offer a comprehensive review on the research on calcium silicate-based drug delivery systems, but presents some examples reported in the literature, and includes new insights obtained by tracking the interactions between drug molecules and calcium silicate carriers on the molecular level using the synchrotron-based X-ray spectroscopy. Expert opinion: Finally, our opinions on calcium silicate-based drug delivery systems are provided, and several research directions for the future studies are proposed.

Study of fuel cell on-site, integrated energy systems in residential/commercial applications

NASA Technical Reports Server (NTRS)

Wakefield, R. A.; Karamchetty, S.; Rand, R. H.; Ku, W. S.; Tekumalla, V.

1980-01-01

Three building applications were selected for a detailed study: a low rise apartment building; a retail store, and a hospital. Building design data were then specified for each application, based on the design and construction of typical, actual buildings. Finally, a computerized building loads analysis program was used to estimate hourly end use load profiles for each building. Conventional and fuel cell based energy systems were designed and simulated for each building in each location. Based on the results of a computer simulation of each energy system, levelized annual costs and annual energy consumptions were calculated for all systems.

A Study of the Design and Implementation of the ASR-Based iCASL System with Corrective Feedback to Facilitate English Learning

ERIC Educational Resources Information Center

Wang, Yi-Hsuan; Young, Shelley Shwu-Ching

2014-01-01

The purpose of the study is to explore and describe how to implement a pedagogical ASR-based intelligent computer-assisted speaking learning (iCASL) system to support adult learners with a private, flexible and individual learning environment to practice English pronunciation. The iCASL system integrates multiple levels of corrective feedback and…

The Process, Dialogues, and Attitudes of Vocational Engineering High School Students in a Web Problem-Based Learning (WPBL) System

ERIC Educational Resources Information Center

Tseng, Kuo-Hung; Chang, Chi-Cheng; Lou, Shi-Jer

2012-01-01

This study aims to explore how high school students collaboratively solve problems in a web problem-based learning (WPBL) system in an 8-week digital logic course using discourse analysis. Employing in-depth interviews, this study also investigated the students' attitudes toward the WPBL system. The number of teaching assistants' responses had a…

Base stock system for patient vs impatient customers with varying demand distribution

NASA Astrophysics Data System (ADS)

Fathima, Dowlath; Uduman, P. Sheik

2013-09-01

An optimal Base-Stock inventory policy for Patient and Impatient Customers using finite-horizon models is examined. The Base stock system for Patient and Impatient customers is a different type of inventory policy. In case of the model I, Base stock for Patient customer case is evaluated using the Truncated Exponential Distribution. The model II involves the study of Base-stock inventory policies for Impatient customer. A study on these systems reveals that the Customers wait until the arrival of the next order or the customers leaves the system which leads to lost sale. In both the models demand during the period [0, t] is taken to be a random variable. In this paper, Truncated Exponential Distribution satisfies the Base stock policy for the patient customer as a continuous model. So far the Base stock for Impatient Customers leaded to a discrete case but, in this paper we have modeled this condition into a continuous case. We justify this approach mathematically and also numerically.

Heterogeneous distributed databases: A case study

NASA Technical Reports Server (NTRS)

Stewart, Tracy R.; Mukkamala, Ravi

1991-01-01

Alternatives are reviewed for accessing distributed heterogeneous databases and a recommended solution is proposed. The current study is limited to the Automated Information Systems Center at the Naval Sea Combat Systems Engineering Station at Norfolk, VA. This center maintains two databases located on Digital Equipment Corporation's VAX computers running under the VMS operating system. The first data base, ICMS, resides on a VAX11/780 and has been implemented using VAX DBMS, a CODASYL based system. The second database, CSA, resides on a VAX 6460 and has been implemented using the ORACLE relational database management system (RDBMS). Both databases are used for configuration management within the U.S. Navy. Different customer bases are supported by each database. ICMS tracks U.S. Navy ships and major systems (anti-sub, sonar, etc.). Even though the major systems on ships and submarines have totally different functions, some of the equipment within the major systems are common to both ships and submarines.

The MORPG-Based Learning System for Multiple Courses: A Case Study on Computer Science Curriculum

ERIC Educational Resources Information Center

Liu, Kuo-Yu

2015-01-01

This study aimed at developing a Multiplayer Online Role Playing Game-based (MORPG) Learning system which enabled instructors to construct a game scenario and manage sharable and reusable learning content for multiple courses. It used the curriculum of "Introduction to Computer Science" as a study case to assess students' learning…

A Reliability and Validity of an Instrument to Evaluate the School-Based Assessment System: A Pilot Study

ERIC Educational Resources Information Center

Ghazali, Nor Hasnida Md

2016-01-01

A valid, reliable and practical instrument is needed to evaluate the implementation of the school-based assessment (SBA) system. The aim of this study is to develop and assess the validity and reliability of an instrument to measure the perception of teachers towards the SBA implementation in schools. The instrument is developed based on a…

Developing a Web-Based Nursing Practice and Research Information Management System: A Pilot Study.

PubMed

Choi, Jeeyae; Lapp, Cathi; Hagle, Mary E

2015-09-01

Many hospital information systems have been developed and implemented to collect clinical data from the bedside and have used the information to improve patient care. Because of a growing awareness that the use of clinical information improves quality of care and patient outcomes, measuring tools (electronic and paper based) have been developed, but most of them require multiple steps of data collection and analysis. This necessitated the development of a Web-based Nursing Practice and Research Information Management System that processes clinical nursing data to measure nurses' delivery of care and its impact on patient outcomes and provides useful information to clinicians, administrators, researchers, and policy makers at the point of care. This pilot study developed a computer algorithm based on a falls prevention protocol and programmed the prototype Web-based Nursing Practice and Research Information Management System. It successfully measured performance of nursing care delivered and its impact on patient outcomes successfully using clinical nursing data from the study site. Although Nursing Practice and Research Information Management System was tested with small data sets, results of study revealed that it has the potential to measure nurses' delivery of care and its impact on patient outcomes, while pinpointing components of nursing process in need of improvement.

System efficiency of a tap transformer based grid connection topology applied on a direct driven generator for wind power.

PubMed

Apelfröjd, Senad; Eriksson, Sandra

2014-01-01

Results from experiments on a tap transformer based grid connection system for a variable speed vertical axis wind turbine are presented. The tap transformer based system topology consists of a passive diode rectifier, DC-link, IGBT inverter, LCL-filter, and tap transformer. Full range variable speed operation is enabled by using the different step-up ratios of a tap transformer. Simulations using MATLAB/Simulink have been performed in order to study the behavior of the system. A full experimental set up of the system has been used in the laboratory study, where a clone of the on-site generator was driven by an induction motor and the system was connected to a resistive load to better evaluate the performance. Furthermore, the system is run and evaluated for realistic wind speeds and variable speed operation. For a more complete picture of the system performance, a case study using real site Weibull parameters is done, comparing different tap selection options. The results show high system efficiency at nominal power and an increase in overall power output for full tap operation in comparison with the base case, a standard transformer. In addition, the loss distribution at different wind speeds is shown, which highlights the dominant losses at low and high wind speeds. Finally, means for further increasing the overall system efficiency are proposed.

System Efficiency of a Tap Transformer Based Grid Connection Topology Applied on a Direct Driven Generator for Wind Power

PubMed Central

2014-01-01

Results from experiments on a tap transformer based grid connection system for a variable speed vertical axis wind turbine are presented. The tap transformer based system topology consists of a passive diode rectifier, DC-link, IGBT inverter, LCL-filter, and tap transformer. Full range variable speed operation is enabled by using the different step-up ratios of a tap transformer. Simulations using MATLAB/Simulink have been performed in order to study the behavior of the system. A full experimental set up of the system has been used in the laboratory study, where a clone of the on-site generator was driven by an induction motor and the system was connected to a resistive load to better evaluate the performance. Furthermore, the system is run and evaluated for realistic wind speeds and variable speed operation. For a more complete picture of the system performance, a case study using real site Weibull parameters is done, comparing different tap selection options. The results show high system efficiency at nominal power and an increase in overall power output for full tap operation in comparison with the base case, a standard transformer. In addition, the loss distribution at different wind speeds is shown, which highlights the dominant losses at low and high wind speeds. Finally, means for further increasing the overall system efficiency are proposed. PMID:25258733

Estimate of Fuel Consumption and GHG Emission Impact from an Automated Mobility District

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yuche; Young, Stanley; Qi, Xuewei

2015-10-19

This study estimates the range of fuel and emissions impact of an automated-vehicle (AV) based transit system that services campus-based developments, termed an automated mobility district (AMD). The study develops a framework to quantify the fuel consumption and greenhouse gas (GHG) emission impacts of a transit system comprised of AVs, taking into consideration average vehicle fleet composition, fuel consumption/GHG emission of vehicles within specific speed bins, and the average occupancy of passenger vehicles and transit vehicles. The framework is exercised using a previous mobility analysis of a personal rapid transit (PRT) system, a system which shares many attributes with envisionedmore » AV-based transit systems. Total fuel consumption and GHG emissions with and without an AMD are estimated, providing a range of potential system impacts on sustainability. The results of a previous case study based of a proposed implementation of PRT on the Kansas State University (KSU) campus in Manhattan, Kansas, serves as the basis to estimate personal miles traveled supplanted by an AMD at varying levels of service. The results show that an AMD has the potential to reduce total system fuel consumption and GHG emissions, but the amount is largely dependent on operating and ridership assumptions. The study points to the need to better understand ride-sharing scenarios and calls for future research on sustainability benefits of an AMD system at both vehicle and system levels.« less

Radiology Reporting System Data Exchange With the Electronic Health Record System: A Case Study in Iran.

PubMed

Ahmadi, Maryam; Ghazisaeidi, Marjan; Bashiri, Azadeh

2015-03-18

In order to better designing of electronic health record system in Iran, integration of health information systems based on a common language must be done to interpret and exchange this information with this system is required. This study provides a conceptual model of radiology reporting system using unified modeling language. The proposed model can solve the problem of integration this information system with the electronic health record system. By using this model and design its service based, easily connect to electronic health record in Iran and facilitate transfer radiology report data. This is a cross-sectional study that was conducted in 2013. The study population was 22 experts that working at the Imaging Center in Imam Khomeini Hospital in Tehran and the sample was accorded with the community. Research tool was a questionnaire that prepared by the researcher to determine the information requirements. Content validity and test-retest method was used to measure validity and reliability of questioner respectively. Data analyzed with average index, using SPSS. Also Visual Paradigm software was used to design a conceptual model. Based on the requirements assessment of experts and related texts, administrative, demographic and clinical data and radiological examination results and if the anesthesia procedure performed, anesthesia data suggested as minimum data set for radiology report and based it class diagram designed. Also by identifying radiology reporting system process, use case was drawn. According to the application of radiology reports in electronic health record system for diagnosing and managing of clinical problem of the patient, with providing the conceptual Model for radiology reporting system; in order to systematically design it, the problem of data sharing between these systems and electronic health records system would eliminate.

First experience with THE AUTOLAP™ SYSTEM: an image-based robotic camera steering device.

PubMed

Wijsman, Paul J M; Broeders, Ivo A M J; Brenkman, Hylke J; Szold, Amir; Forgione, Antonello; Schreuder, Henk W R; Consten, Esther C J; Draaisma, Werner A; Verheijen, Paul M; Ruurda, Jelle P; Kaufman, Yuval

2018-05-01

Robotic camera holders for endoscopic surgery have been available for 20 years but market penetration is low. The current camera holders are controlled by voice, joystick, eyeball tracking, or head movements, and this type of steering has proven to be successful but excessive disturbance of surgical workflow has blocked widespread introduction. The Autolap™ system (MST, Israel) uses a radically different steering concept based on image analysis. This may improve acceptance by smooth, interactive, and fast steering. These two studies were conducted to prove safe and efficient performance of the core technology. A total of 66 various laparoscopic procedures were performed with the AutoLap™ by nine experienced surgeons, in two multi-center studies; 41 cholecystectomies, 13 fundoplications including hiatal hernia repair, 4 endometriosis surgeries, 2 inguinal hernia repairs, and 6 (bilateral) salpingo-oophorectomies. The use of the AutoLap™ system was evaluated in terms of safety, image stability, setup and procedural time, accuracy of imaged-based movements, and user satisfaction. Surgical procedures were completed with the AutoLap™ system in 64 cases (97%). The mean overall setup time of the AutoLap™ system was 4 min (04:08 ± 0.10). Procedure times were not prolonged due to the use of the system when compared to literature average. The reported user satisfaction was 3.85 and 3.96 on a scale of 1 to 5 in two studies. More than 90% of the image-based movements were accurate. No system-related adverse events were recorded while using the system. Safe and efficient use of the core technology of the AutoLap™ system was demonstrated with high image stability and good surgeon satisfaction. The results support further clinical studies that will focus on usability, improved ergonomics and additional image-based features.

The feasibility of paper-based Tracking Codes and electronic medical record systems to monitor tobacco-use assessment and intervention in an Individual Practice Association (IPA) Model health maintenance organization (HMO).

PubMed

Bentz, Charles J; Davis, Nancy; Bayley, Bruce

2002-01-01

Despite evidence of its effectiveness, tobacco cessation is not systematically addressed in routine healthcare settings. Its measurement is part of the problem. A pilot study was designed to develop and implement two different tobacco tracking systems in two independent primary care offices that participated in an IPA Model health maintenance organization in Portland, Oregon. The first clinic, which utilized a paper-based charting system, implemented CPT-like tracking codes to measure and report tobacco-cessation activities, which were eventually included in the managed-care organization's (MCO) claims database. The second clinic implemented an electronic tracking system based on its computerized electronic medical record (EMR) charting system. This paper describes the pilot study, including the processes involved in building provider acceptance for the new tracking systems in these two clinics, the barriers and successes encountered during implementation, and the resources expended by the clinics and by the MCO during the pilot. The findings from the 3-month implementation period were that documentation of tobacco-use status remained stable at 42-45% in the paper-based clinic and increased from 79% to 88% in the EMR clinic. This pilot study demonstrated that Tracking Codes are a feasible preventive-care tracking system in paper-based medical offices. However, high levels of effort and support are needed, and a critical mass of insurers and health plans would need to adopt Tracking Codes before widespread use could be expected. Results of the EMR-based tracking system are also reviewed and discussed.

DEVELOP A CONCENTRATED SOLAR POWER-BASED THERMAL COOLING SYSTEM VIA SIMULATION AND EXPERIMENTAL STUDIES

EPA Science Inventory

A small scale CSP-based cooling system prototype (300W cooling capacity) and the system performance simulation tool will be developed as a proof of concept. Practical issues will be identified to improve our design.

Communications Based Train Control (CBTC) Before and After Cost Study

DOT National Transportation Integrated Search

2011-03-01

San Francisco Municipal Railway (Muni) undertook a retrofit of a fixed-block signaling system with a communications-based train control (CBTC) system in the subway portion of their light rail system (Muni Metro subway) in 1998. This report presents t...

75 FR 20850 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... in the efforts to make system changes. Grantees will complete systems web-based data entry on goals... grantee and key staff-partner interview 249 2 1.60 797 guide EBHV grantee systems web-based data entry... prevent child maltreatment. An evaluation study will address four domains: (1) Systems change to develop...

Aviation system modeling study and alternatives

NASA Technical Reports Server (NTRS)

1975-01-01

The Aviation System Modeling Study was directed toward two primary goals: an improved understanding of the U.S. aviation system, and technology. There are three major categories into which the individual study efforts may be subdivided. These three categories are: special issue studies, task studies, and data base development.

A Data Base Management System for Clinical and Epidemiologic Studies In Systemic Lupus Erythematosus: Design and Maintenance

PubMed Central

Kosmides, Victoria S.; Hochberg, Marc C.

1984-01-01

This report describes the development, design specifications, features and implementation of a data base management system (DBMS) for clinical and epidemiologic studies in SLE. The DBMS is multidimensional with arrays formulated across patients, studies and variables. The major impact of this DBMS has been to increase the efficiency of managing and analyzing vast amounts of clinical and laboratory data and, as a result, to allow for continued growth in research productivity in areas related to SLE.

Space-Based Solar Power Conversion and Delivery Systems Study. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1977-01-01

The research concerning space-based solar power conversion and delivery systems is summarized. The potential concepts for a photovoltaic satellite solar power system was studied with emphasis on ground output power levels of 5,000 MW and 10,000 MW. A power relay satellite, and certain aspects of the economics of these systems were also studied. A second study phase examined in greater depth the technical and economic aspects of satellite solar power systems. Throughout this study, the focus was on the economics of satellite solar power. The results indicate technical feasibility of the concept, and provide a preliminary economic justification for the first phase of a substantial development program. A development program containing test satellites is recommended. Also, development of alternative solar cell materials (other than silicon) is recommended.

Advanced space program studies: Overall executive summary

NASA Technical Reports Server (NTRS)

Sitney, L. R.

1974-01-01

Studies were conducted to provide NASA with advanced planning analyses which relate integrated space program goals and options to credible technical capabilities, applications potential, and funding resources. The studies concentrated on the following subjects: (1) upper stage options for the space transportation system based on payload considerations, (2) space servicing and standardization of payloads, (3) payload operations, and (4) space transportation system economic analyses related to user charges and new space applications. A systems cost/performance model was developed to synthesize automated, unmanned spacecraft configurations based on the system requirements and a list of equipments at the assembly level.

Intelligent agents for adaptive security market surveillance

NASA Astrophysics Data System (ADS)

Chen, Kun; Li, Xin; Xu, Baoxun; Yan, Jiaqi; Wang, Huaiqing

2017-05-01

Market surveillance systems have increasingly gained in usage for monitoring trading activities in stock markets to maintain market integrity. Existing systems primarily focus on the numerical analysis of market activity data and generally ignore textual information. To fulfil the requirements of information-based surveillance, a multi-agent-based architecture that uses agent intercommunication and incremental learning mechanisms is proposed to provide a flexible and adaptive inspection process. A prototype system is implemented using the techniques of text mining and rule-based reasoning, among others. Based on experiments in the scalping surveillance scenario, the system can identify target information evidence up to 87.50% of the time and automatically identify 70.59% of cases depending on the constraints on the available information sources. The results of this study indicate that the proposed information surveillance system is effective. This study thus contributes to the market surveillance literature and has significant practical implications.

Proceedings of the DOE chemical energy storage and hydrogen energy systems contracts review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Sessions were held on electrolysis-based hydrogen storage systems, hydrogen production, hydrogen storage systems, hydrogen storage materials, end-use applications and system studies, chemical heat pump/chemical energy storage systems, systems studies and assessment, thermochemical hydrogen production cycles, advanced production concepts, and containment materials. (LHK)

Are Integrated Portfolio Systems the Answer? An Evaluation of a Web-Based Portfolio System to Improve Preservice Teachers' Reflective Thinking Skills

ERIC Educational Resources Information Center

Oner, Diler; Adadan, Emine

2016-01-01

This study investigated the effectiveness of an integrated web-based portfolio system, namely the BOUNCE System, which primarily focuses on improving preservice teachers' reflective thinking skills. BOUNCE©, the software component of the system, was designed and developed to support a teaching practice model including a cycle of activities to be…

The financial viability of an SOFC cogeneration system in single-family dwellings

NASA Astrophysics Data System (ADS)

Alanne, Kari; Saari, Arto; Ugursal, V. Ismet; Good, Joel

In the near future, fuel cell-based residential micro-CHP systems will compete with traditional methods of energy supply. A micro-CHP system may be considered viable if its incremental capital cost compared to its competitors equals to cumulated savings during a given period of time. A simplified model is developed in this study to estimate the operation of a residential solid oxide fuel cell (SOFC) system. A comparative assessment of the SOFC system vis-à-vis heating systems based on gas, oil and electricity is conducted using the simplified model for a single-family house located in Ottawa and Vancouver. The energy consumption of the house is estimated using the HOT2000 building simulation program. A financial analysis is carried out to evaluate the sensitivity of the maximum allowable capital cost with respect to system sizing, acceptable payback period, energy price and the electricity buyback strategy of an energy utility. Based on the financial analysis, small (1-2 kW e) SOFC systems seem to be feasible in the considered case. The present study shows also that an SOFC system is especially an alternative to heating systems based on oil and electrical furnaces.

a Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

NASA Astrophysics Data System (ADS)

Park, Young-Tack; Kim, Jae-Hoon; Park, Hyun-Soo

1997-06-01

Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

Piloting a Web-Based Homework System in Developmental Mathematics Classrooms

ERIC Educational Resources Information Center

Dass, Wendi E.

2012-01-01

This Capstone project studied a pilot of the web-based homework system "Hawkes" in developmental mathematics classes at a mid-sized community college. The purpose of the study was to investigate how three instructors of developmental mathematics courses incorporated "Hawkes" in their classes, what obstacles they encountered,…

Model-based approach to study the impact of biofuels on the sustainability of an ecological system

EPA Science Inventory

The importance and complexity of sustainability have been well recognized and a formal study of sustainability based on system theory approaches is imperative as many of the relationships between various components of the ecosystem could be nonlinear, intertwined and non-intuitiv...

Model based approach to Study the Impact of Biofuels on the Sustainability of an Ecological System

EPA Science Inventory

The importance and complexity of sustainability has been well recognized and a formal study of sustainability based on system theory approaches is imperative as many of the relationships between various components of the ecosystem could be nonlinear, intertwined and non intuitive...

Psychophysical experiments on the PicHunter image retrieval system

NASA Astrophysics Data System (ADS)

Papathomas, Thomas V.; Cox, Ingemar J.; Yianilos, Peter N.; Miller, Matt L.; Minka, Thomas P.; Conway, Tiffany E.; Ghosn, Joumana

2001-01-01

Psychophysical experiments were conducted on PicHunter, a content-based image retrieval (CBIR) experimental prototype with the following properties: (1) Based on a model of how users respond, it uses Bayes's rule to predict what target users want, given their actions. (2) It possesses an extremely simple user interface. (3) It employs an entropy- based scheme to improve convergence. (4) It introduces a paradigm for assessing the performance of CBIR systems. Experiments 1-3 studied human judgment of image similarity to obtain data for the model. Experiment 4 studied the importance of using: (a) semantic information, (b) memory of earlier input, and (c) relative and absolute judgments of similarity. Experiment 5 tested an approach that we propose for comparing performances of CBIR systems objectively. Finally, experiment 6 evaluated the most informative display-updating scheme that is based on entropy minimization, and confirmed earlier simulation results. These experiments represent one of the first attempts to quantify CBIR performance based on psychophysical studies, and they provide valuable data for improving CBIR algorithms. Even though they were designed with PicHunter in mind, their results can be applied to any CBIR system and, more generally, to any system that involves judgment of image similarity by humans.

[Discussion on theory and indes system of Chinese material medical regionalization].

PubMed

Zhang, Xiaobo; Guo, Lanping; Zhou, Tao; Huang, Luqi

2010-09-01

The paper discusses the theory regarding to the Chinese material medical (CMM) regionalization. It is based on the studying of papers and practical experience in the field of CMM regionalization. The basic theories of CMM regionalization are laws of territorial differentiation and location theory. The basic principles are excellent quality of CMM, difference, similarity and practicability. The study objects are CMM resources, natural environment and social environment. The definition of CMM regionalization is that study on the laws of spatial pattern of resources and regional system in the field of CMM,then regionalize it based on this kind of spatial pattern and law. The index system is built based on the study of the theory,principle,object and index of CMM regionalization.

Development of an interactive data base management system for capturing large volumes of data.

PubMed

Moritz, T E; Ellis, N K; VillaNueva, C B; Steeger, J E; Ludwig, S T; Deegan, N I; Shroyer, A L; Henderson, W G; Sethi, G K; Grover, F L

1995-10-01

Accurate collection and successful management of data are problems common to all scientific studies. For studies in which large quantities of data are collected by means of questionnaires and/or forms, data base management becomes quite laborious and time consuming. Data base management comprises data collection, data entry, data editing, and data base maintenance. In this article, the authors describe the development of an interactive data base management (IDM) system for the collection of more than 1,400 variables from a targeted population of 6,000 patients undergoing heart surgery requiring cardiopulmonary bypass. The goals of the IDM system are to increase the accuracy and efficiency with which this large amount of data is collected and processed, to reduce research nurse work load through automation of certain administrative and clerical activities, and to improve the process for implementing a uniform study protocol, standardized forms, and definitions across sites.

Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

NASA Technical Reports Server (NTRS)

Lee, S. C.; Lollar, Louis F.

1988-01-01

The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

Cloud GIS Based Watershed Management

NASA Astrophysics Data System (ADS)

Bediroğlu, G.; Colak, H. E.

2017-11-01

In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

Evaluation of Geometric Design Needs of Freeway Systems Based on Traffic and Geometric Data

DOT National Transportation Integrated Search

2013-10-20

In Las Vegas, Nevada, the increased traffic competes for the limited spaces available in the freeway system and thus reduces safety performance. This study identified geometric design issues on freeway systems in Las Vegas, Nevada, based on available...

Extraction of Trivalent Actinides and Lanthanides from Californium Campaign Rework Solution Using TODGA-based Solvent Extraction System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benker, Dennis; Delmau, Laetitia Helene; Dryman, Joshua Cory

This report presents the studies carried out to demonstrate the possibility of quantitatively extracting trivalent actinides and lanthanides from highly acidic solutions using a neutral ligand-based solvent extraction system. These studies stemmed from the perceived advantage of such systems over cationexchange- based solvent extraction systems that require an extensive feed adjustment to make a low-acid feed. The targeted feed solutions are highly acidic aqueous phases obtained after the dissolution of curium targets during a californium (Cf) campaign. Results obtained with actual Cf campaign solutions, but highly diluted to be manageable in a glove box, are presented, followed by results ofmore » tests run in the hot cells with Cf campaign rework solutions. It was demonstrated that a solvent extraction system based on the tetraoctyl diglycolamide molecule is capable of quantitatively extracting trivalent actinides from highly acidic solutions. This system was validated using actual feeds from a Cf campaign.« less

Hierarchy of evidence: a simple system for orthopaedic research?

PubMed

Pemberton, Julia; Kraeva, Juliana; Bhandari, Mohit

2007-01-01

To be able to make a sound recommendation for a treatment based on the best available evidence, it is necessary to follow specific steps in acquiring literature, appraising the study design and quality, and assessing the results. Evidence-based medicine is founded on the concepts of using best evidence, levels of evidence, and grades of recommendation, and aims to provide clinicians with standardized rules to help them appraise the validity of published research. A number of systems have been developed to categorize research studies into consistent levels of evidence. These systems are based primarily on consensus expert opinion, and have not been validated to any extent. The use of different systems does not allow for effective communication between users; there is a lack of accord even between users of the same system. The GRADE working group has devised a new rating system that attempts to address deficiencies seen within other systems.

Healthcare system and the wealth-health gradient: a comparative study of older populations in six countries.

PubMed

Maskileyson, Dina

2014-10-01

The present study provides a comparative analysis of the association between wealth and health in six healthcare systems (Sweden, the United Kingdom, Germany, the Czech Republic, Israel, the United States). National samples of individuals fifty years and over reveal considerable cross-country variations in health outcomes. In all six countries wealth and health are positively associated. The findings also show that state-based healthcare systems produce better population health outcomes than private-based healthcare systems. The results indicate that in five out of the six countries studied, the wealth-health gradients were remarkably similar, despite significant variations in healthcare system type. Only in the United States was the association between wealth and health substantially different from, and much greater than that in the other five countries. The findings suggest that private-based healthcare system in the U.S. is likely to promote stronger positive associations between wealth and health. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Study on the Data Compression Technology-Based Intelligent Data Acquisition (IDAQ) System for Structural Health Monitoring of Civil Structures

PubMed Central

Jeon, Joonryong

2017-01-01

In this paper, a data compression technology-based intelligent data acquisition (IDAQ) system was developed for structural health monitoring of civil structures, and its validity was tested using random signals (El-Centro seismic waveform). The IDAQ system was structured to include a high-performance CPU with large dynamic memory for multi-input and output in a radio frequency (RF) manner. In addition, the embedded software technology (EST) has been applied to it to implement diverse logics needed in the process of acquiring, processing and transmitting data. In order to utilize IDAQ system for the structural health monitoring of civil structures, this study developed an artificial filter bank by which structural dynamic responses (acceleration) were efficiently acquired, and also optimized it on the random El-Centro seismic waveform. All techniques developed in this study have been embedded to our system. The data compression technology-based IDAQ system was proven valid in acquiring valid signals in a compressed size. PMID:28704945

A Study on the Data Compression Technology-Based Intelligent Data Acquisition (IDAQ) System for Structural Health Monitoring of Civil Structures.

PubMed

Heo, Gwanghee; Jeon, Joonryong

2017-07-12

In this paper, a data compression technology-based intelligent data acquisition (IDAQ) system was developed for structural health monitoring of civil structures, and its validity was tested using random signals (El-Centro seismic waveform). The IDAQ system was structured to include a high-performance CPU with large dynamic memory for multi-input and output in a radio frequency (RF) manner. In addition, the embedded software technology (EST) has been applied to it to implement diverse logics needed in the process of acquiring, processing and transmitting data. In order to utilize IDAQ system for the structural health monitoring of civil structures, this study developed an artificial filter bank by which structural dynamic responses (acceleration) were efficiently acquired, and also optimized it on the random El-Centro seismic waveform. All techniques developed in this study have been embedded to our system. The data compression technology-based IDAQ system was proven valid in acquiring valid signals in a compressed size.

Dual-energy in mammography: feasibility study

NASA Astrophysics Data System (ADS)

Jafroudi, Hamid; Lo, Shih-Chung B.; Li, Huai; Steller Artz, Dorothy E.; Freedman, Matthew T.; Mun, Seong K.

1996-04-01

The purpose of this work is to examine the feasibility of dual-energy techniques to enhance the detection of microcalcifications in digital mammography. The digital mammography system used in this study consists of two different mammography systems; one is the conventional mammography system with molybdenum target and Mo filtration and the other is the clinical version of a low dose x-ray system with tungsten target and aluminum filtration. The low dose system is optimized for screen-film mammography with a highly efficient scatter rejection device built by Fischer Imaging Systems for evaluation at NIH. The system was designed by the University of Southern California based on multiparameter optimization techniques. Prototypes of this system have been constructed and evaluated at the Center for Devices and Radiological Health. The digital radiography system is based on the Fuji 9000 computed radiography (CR) system which uses a storage phosphor imaging plate as the receptor. High resolution plates (HR-V) are used in this study. Dual-energy is one technique to reduce the structured noise associated with the complexity of the background of normal anatomy surrounding a lesion. This can be done by taking the advantage of the x-ray attenuation characteristics of two different structures such as soft tissue and bone in chest radiography. We have applied this technique to the detection of microcalcifications in mammography. The overall system performance based on this technique is evaluated. Results presented are based on the evaluation of phantom images.

UMCS feasibility study for Fort George G. Meade. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-12-01

Fort George G. Meade selected eighty-three (83) buildings, from the approximately 1,500 buildings on the base to be included in the UMCS Feasibility Study. The purpose of the study is to evaluate the feasibility of replacing the existing analog based Energy Monitoring and Control System (EMCS) with a new distributed process Monitoring and Control System (UMCS).

Digital Badges for Teacher Mastery: An Exploratory Study of a Competency-Based Professional Development Badge System. CCT Reports

ERIC Educational Resources Information Center

Diamond, James; Gonzalez, Pilar Carmina

2014-01-01

This study contributes knowledge about how a digital badge system integrated into an online, subject-matter-specific, and competency-based professional development (PD) program affected teachers' experiences with and perceptions of the program activities. The report presents findings from a one-year exploratory study of an online PD program, and…

Non-invasive, home-based electroencephalography hypoglycaemia warning system for personal monitoring using skin surface electrodes: a single-case feasibility study.

PubMed

Clewett, Christopher J; Langley, Phillip; Bateson, Anthony D; Asghar, Aziz; Wilkinson, Antony J

2016-03-01

Hypoglycaemia unawareness is a common condition associated with increased risk of severe hypoglycaemia. The purpose of the authors' study was to develop a simple to use, home-based and non-invasive hypoglycaemia warning system based on electroencephalography (EEG), and to demonstrate its use in a single-case feasibility study. A participant with type 1 diabetes forms a single-person case study where blood sugar levels and EEG were recorded. EEG was recorded using skin surface electrodes placed behind the ear located within the T3 region by the participant in the home. EEG was analysed retrospectively to develop an algorithm which would trigger a warning if EEG changes associated with hypoglycaemia onset were detected. All hypoglycaemia events were detected by the EEG hypoglycaemia warning algorithm. Warnings were triggered with blood glucose concentration levels at or below 4.2 mmol/l in this participant and no warnings were issued when in euglycaemia. The feasibility of a non-invasive EEG-based hypoglycaemia warning system for personal monitoring in the home has been demonstrated in a single case study. The results suggest that further studies are warranted to evaluate the system prospectively in a larger group of participants.

Identifying Challenges to the Integration of Computer-Based Surveillance Information Systems in a Large City Health Department: A Case Study.

PubMed

Jennings, Jacky M; Stover, Jeffrey A; Bair-Merritt, Megan H; Fichtenberg, Caroline; Munoz, Mary Grace; Maziad, Rafiq; Ketemepi, Sherry Johnson; Zenilman, Jonathan

2009-01-01

Integrated infectious disease surveillance information systems have the potential to provide important new surveillance capacities and business efficiencies for local health departments. We conducted a case study at a large city health department of the primary computer-based infectious disease surveillance information systems during a 10-year period to identify the major challenges for information integration across the systems. The assessment included key informant interviews and evaluations of the computer-based surveillance information systems used for acute communicable diseases, human immunodeficiency virus/acquired immunodeficiency syndrome, sexually transmitted diseases, and tuberculosis. Assessments were conducted in 1998 with a follow-up in 2008. Assessments specifically identified and described the primary computer-based surveillance information system, any duplicative information systems, and selected variables collected. Persistent challenges to information integration across the information systems included the existence of duplicative data systems, differences in the variables used to collect similar information, and differences in basic architecture. The assessments identified a number of challenges for information integration across the infectious disease surveillance information systems at this city health department. The results suggest that local disease control programs use computer-based surveillance information systems that were not designed for data integration. To the extent that integration provides important new surveillance capacities and business efficiencies, we recommend that patient-centric information systems be designed that provide all the epidemiologic, clinical, and research needs in one system. In addition, the systems should include a standard system of elements and fields across similar surveillance systems.

Patientsmate©: the implementation and evaluation of an online prospective audit system.

PubMed

McHugh, Seamus Mark; Loh, Kah Poh; Corrigan, Mark Anthony; Sheikh, Athar; Lehane, Elaine; Hill, Arnold David Konrad

2012-04-01

Inaccuracy in Hospital Inpatient Enquiry (HIPE)/Casemix-based data has been reported as high as 26%. This results in financial waste and makes effective audit impossible. We aimed to develop a novel web-based outcome audit system. A web-based online audit system, Patientsmate©, was developed using an integrated database system written in the programme language PHP. Data were inputted by the surgical team responsible for the patients care. A prospective comparison study of the new Patientsmate© and the standard HIPE systems, was performed over a 1-month period and involving two general surgical teams in April 2010. In addition, a Likert-scale based questionnaire was designed and hosted within the Patientsmate© system. A focus group of those clinicians directly involved in data accessing and input were then invited to complete the questionnaire in order to assess usability of the system. During the study period there were a total of 108 patients and 88 procedures. Our study confirms the accuracy of clinician derived data, with the Patientsmate© system more accurately recording number of patients (83% vs. 80.6%), number of procedures (85.2% vs. 68.1%) and hospital day case rate (52% vs. 47.1%). Inputting data using Patientsmate© for a single patient took 6-7 minutes. Of those using the system, 75% reported feeling comfortable after using it once only and 100% were satisfied with the layout of the online interface. The Patientsmate© system allows for increased accuracy in outcome-based data as compared with the HIPE system, facilitating audit, financial savings and the appropriate allocation of services. © 2010 Blackwell Publishing Ltd.

North-South America Network of Magnetically Conjugate All-Sky Imagers

DTIC Science & Technology

2015-01-02

based (radio and optical) systems and via in‐situ instruments onboard rockets and satellites. The ionosphere can be observed by a variety...to study the full system in a comprehensive way. The two locations at the base of a given terrestrial B‐line (one in the northern hemisphere and one...imagers to be established. This was based on the need to study ionospheric disturbances ordered by their geomagnetic

TEXSYS. [a knowledge based system for the Space Station Freedom thermal control system test-bed

NASA Technical Reports Server (NTRS)

Bull, John

1990-01-01

The Systems Autonomy Demonstration Project has recently completed a major test and evaluation of TEXSYS, a knowledge-based system (KBS) which demonstrates real-time control and FDIR for the Space Station Freedom thermal control system test-bed. TEXSYS is the largest KBS ever developed by NASA and offers a unique opportunity for the study of technical issues associated with the use of advanced KBS concepts including: model-based reasoning and diagnosis, quantitative and qualitative reasoning, integrated use of model-based and rule-based representations, temporal reasoning, and scale-up performance issues. TEXSYS represents a major achievement in advanced automation that has the potential to significantly influence Space Station Freedom's design for the thermal control system. An overview of the Systems Autonomy Demonstration Project, the thermal control system test-bed, the TEXSYS architecture, preliminary test results, and thermal domain expert feedback are presented.

Space transportation nodes assumptions and requirements: Lunar base systems study task 2.1

NASA Technical Reports Server (NTRS)

Kahn, Taher Ali; Simonds, Charles H.; Stump, William R.

1988-01-01

The Space Transportation Nodes Assumptions and Requirements task was performed as part of the Advanced Space Transportation Support Contract, a NASA Johnson Space Center (JSC) study intended to provide planning for a Lunar Base near the year 2000. The original task statement has been revised to satisfy the following queries: (1) What vehicles are to be processed at the transportation node; (2) What is the flow of activities involved in a vehicle passing through the node; and (3) What node support resources are necessary to support a lunar scenario traffic model composed of a mix of vehicles in an active flight schedule. The Lunar Base Systems Study is concentrating on the initial years of the Phase 2 Lunar Base Scenario. The study will develop the first five years of that phase in order to define the transportation and surface systems (including mass, volumes, power requirements, and designs).

Development of a health care systems curriculum.

PubMed

Pruitt, Zachary; Mhaskar, Rahul; Kane, Bryan G; Barraco, Robert D; DeWaay, Deborah J; Rosenau, Alex M; Bresnan, Kristin A; Greenberg, Marna Rayl

2017-01-01

There is currently no gold standard for delivery of systems-based practice in medical education, and it is challenging to incorporate into medical education. Health systems competence requires physicians to understand patient care within the broader health care system and is vital to improving the quality of care clinicians provide. We describe a health systems curriculum that utilizes problem-based learning across 4 years of systems-based practice medical education at a single institution. This case study describes the application of a problem-based learning approach to system-based practice medical education. A series of behavioral statements, called entrustable professional activities, was created to assess student health system competence. Student evaluation of course curriculum design, delivery, and assessment was provided through web-based surveys. To meet competency standards for system-based practice, a health systems curriculum was developed and delivered across 4 years of medical school training. Each of the health system lectures and problem-based learning activities are described herein. The majority of first and second year medical students stated they gained working knowledge of health systems by engaging in these sessions. The majority of the 2016 graduating students (88.24%) felt that the course content, overall, prepared them for their career. A health systems curriculum in undergraduate medical education using a problem-based learning approach is feasible. The majority of students learning health systems curriculum through this format reported being prepared to improve individual patient care and optimize the health system's value (better care and health for lower cost).

Rural land mobile radio market assessment and satellite and terrestrial system concepts

NASA Technical Reports Server (NTRS)

Stevenson, S.; Provencher, C.

1984-01-01

The market for satellite-based mobile radio in the rural U.S. is evaluated, summarizing the results of two NASA-funded studies reported by Anderson et al. and Hornstein. The study aims are listed, and the results are presented in tables, graphs, and maps and discussed. Space systems are found to be competitive with land-based systems, providing superior service at lower subscriber charges, but having limited compatibility with urban cellular mobile-radio systems. Of the three system concepts evaluated from a technological standpoint (direct-to-mobile, mobile-translator, and hybrid), the mobile-translator concept is considered most cost effective, at least within the constraints assumed in the study.

A data-management system for detailed areal interpretive data

USGS Publications Warehouse

Ferrigno, C.F.

1986-01-01

A data storage and retrieval system has been developed to organize and preserve areal interpretive data. This system can be used by any study where there is a need to store areal interpretive data that generally is presented in map form. This system provides the capability to grid areal interpretive data for input to groundwater flow models at any spacing and orientation. The data storage and retrieval system is designed to be used for studies that cover small areas such as counties. The system is built around a hierarchically structured data base consisting of related latitude-longitude blocks. The information in the data base can be stored at different levels of detail, with the finest detail being a block of 6 sec of latitude by 6 sec of longitude (approximately 0.01 sq mi). This system was implemented on a mainframe computer using a hierarchical data base management system. The computer programs are written in Fortran IV and PL/1. The design and capabilities of the data storage and retrieval system, and the computer programs that are used to implement the system are described. Supplemental sections contain the data dictionary, user documentation of the data-system software, changes that would need to be made to use this system for other studies, and information on the computer software tape. (Lantz-PTT)

Interfacial micromorphological differences in hybrid layer formation between water- and solvent-based dentin bonding systems.

PubMed

Gregoire, Geneviève L; Akon, Bernadette A; Millas, Arlette

2002-06-01

Many dentin bonding systems of different compositions, and in particular containing different solvents, have been introduced to the market. Their effect on the quality of the interface requires clarification by means of comparative trials. This study investigated micromorphological differences in hybrid layer formation with a variety of commercially available water- or solvent-based dentin bonding products and their recommended compomers. Five bonding systems were used on groups of 10 teeth each as follows: group I, acetone-based system used with 36% phosphoric acid; group II, a different acetone-based system containing nano-sized particles for filler loading and used with a non-rinsing conditioner containing maleic acid; group III, the acetone-based system of group II used with 36% phosphoric acid (the only difference in the treatment for groups II and III was the acid etching system); group IV, a mixed-solvent-based system (water/ethanol) used with 37% phosphoric acid; and group V, a water-based system used with 37% phosphoric acid. Each bonding system was covered with the recommended compomer. Class I occlusal preparations were made in extracted teeth and restored with one of the above systems. Five specimens of each group were studied with optical microscopy after staining. Scanning electron microscopy was used to examine the interface of the bonding system/dentin of the other 5 teeth in each group. The optical microscopy measurements were made with a 10 x 10 reticle. A micron mark with scale was used for the scanning electron microscope. All measurements were made in microm. The following criteria were used to define a good interface: absence of voids between the different parts of the interface, uniformity of the hybrid layer, good opening of the tubuli orifices, and tag adherence to the tubuli walls. Morphological differences were found at the interface depending on dentin treatment and adhesive composition. The acetone-containing systems were associated with a continuous, gap-free hybrid layer that was linked intimately with the dentin. The tags adhered well to the tubuli walls and were often joined by side branches. In the water-based solvent systems, a lack of contact was visible between the resin tags and the tubuli walls, with some incompletely filled tubuli and some gaps in the hybrid layer. The 2 observational methods used, optical and scanning electron microscopy, proved to be complementary. Within the limitations of this study, use of the acetone-based systems after phosphoric acid etching resulted in a continuous, thick hybrid layer with reverse-cone-shaped tags in close contact with the tubuli walls. Use of the water-based systems resulted in a thinner hybrid layer with some incompletely sealed dentinal tubules.

Stability analysis of spacecraft power systems

NASA Technical Reports Server (NTRS)

Halpin, S. M.; Grigsby, L. L.; Sheble, G. B.; Nelms, R. M.

1990-01-01

The problems in applying standard electric utility models, analyses, and algorithms to the study of the stability of spacecraft power conditioning and distribution systems are discussed. Both single-phase and three-phase systems are considered. Of particular concern are the load and generator models that are used in terrestrial power system studies, as well as the standard assumptions of load and topological balance that lead to the use of the positive sequence network. The standard assumptions regarding relative speeds of subsystem dynamic responses that are made in the classical transient stability algorithm, which forms the backbone of utility-based studies, are examined. The applicability of these assumptions to a spacecraft power system stability study is discussed in detail. In addition to the classical indirect method, the applicability of Liapunov's direct methods to the stability determination of spacecraft power systems is discussed. It is pointed out that while the proposed method uses a solution process similar to the classical algorithm, the models used for the sources, loads, and networks are, in general, more accurate. Some preliminary results are given for a linear-graph, state-variable-based modeling approach to the study of the stability of space-based power distribution networks.

Data Mining for Web-Based Support Systems: A Case Study in e-Custom Systems

NASA Astrophysics Data System (ADS)

Razmerita, Liana; Kirchner, Kathrin

This chapter provides an example of a Web-based support system (WSS) used to streamline trade procedures, prevent potential security threats, and reduce tax-related fraud in cross-border trade. The architecture is based on a service-oriented architecture that includes smart seals and Web services. We discuss the implications and suggest further enhancements to demonstrate how such systems can move toward a Web-based decision support system with the support of data mining methods. We provide a concrete example of how data mining can help to analyze the vast amount of data collected while monitoring the container movements along its supply chain.

Study on virtual instrument developing system based on intelligent virtual control

NASA Astrophysics Data System (ADS)

Tang, Baoping; Cheng, Fabin; Qin, Shuren

2005-01-01

The paper introduces a non-programming developing system of a virtual instument (VI), i.e., a virtual measurement instrument developing system (VMIDS) based on intelligent virtual control (IVC). The background of the IVC-based VMIDS is described briefly, and the hierarchical message bus (HMB)-based software architecture of VMIDS is discussed in detail. The three parts and functions of VMIDS are introduced, and the process of non-programming developing VI is further described.

SP-100 power system conceptual design for lunar base applications

NASA Technical Reports Server (NTRS)

Mason, Lee S.; Bloomfield, Harvey S.; Hainley, Donald C.

1989-01-01

A conceptual design is presented for a nuclear power system utilizing an SP-100 reactor and multiple Stirling cycle engines for operation on the lunar surface. Based on the results of this study, it was concluded that this power plant could be a viable option for an evolutionary lunar base. The design concept consists of a 2500 kWt (kilowatt thermal) SP-100 reactor coupled to eight free-piston Stirling engines. Two of the engines are held in reserve to provide conversion system redundancy. The remaining engines operate at 91.7 percent of their rated capacity of 150 kWe. The design power level for this system is 825 kWe. Each engine has a pumped heat-rejection loop connected to a heat pipe radiator. Power system performance, sizing, layout configurations, shielding options, and transmission line characteristics are described. System components and integration options are compared for safety, high performance, low mass, and ease of assembly. The power plant was integrated with a proposed human lunar base concept to ensure mission compatibility. This study should be considered a preliminary investigation; further studies are planned to investigate the effect of different technologies on this baseline design.

Investigation into interactive graphics data base exchange via Gerber data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, R.E.

1980-03-01

Data representing the same interactive grahic design vary greatly from one graphics system manufacturer to another. Therefore, translating the data into a common form to effect data base exchange is a difficult problem. This study examines the use of the Gerber language as a common data form through which design data could be exchanged between unlike systems. For this study Applicon Graphic System was used cyclically to check retention or degeneration of the data integrity when the original design was extracted/defined in the Gerber language and reentered into the AGS utilizing various Gerber Interface Programs. The various parts of thismore » study include the transferring of data not only in the 2D environment, but 2D to 3D and 3D to 2D. Even though plots of the files appear very similar, the individual data bases are very dissimilar. Programs, both present and future, that might supply needed information or design aids and characteristics would find it virtually impossible to do so from a data base lacking the sophistication and completeness of the original AGS data base. Man-machine hours required to bring the data base back to original quality would be extensive. The loss of data base integrity shown by this study was restricted to an AGS to AGS transfer. The loss could very easily be magnified if the transfer were between unlike systems. 8 figures. (RWR)« less

HIS-Based Support of Follow-Up Documentation – Concept and Implementation for Clinical Studies

PubMed Central

Herzberg, S.; Fritz, F.; Rahbar, K.; Stegger, L.; Schäfers, M.; Dugas, M.

2011-01-01

Objective Follow-up data must be collected according to the protocol of each clinical study, i.e. at certain time points. Missing follow-up information is a critical problem and may impede or bias the analysis of study data and result in delays. Moreover, additional patient recruitment may be necessary due to incomplete follow-up data. Current electronic data capture (EDC) systems in clinical studies are usually separated from hospital information systems (HIS) and therefore can provide limited functionality to support clinical workflow. In two case studies, we assessed the feasibility of HIS-based support of follow-up documentation. Methods We have developed a data model and a HIS-based workflow to provide follow-up forms according to clinical study protocols. If a follow-up form was due, a database procedure created a follow-up event which was translated by a communication server into an HL7 message and transferred to the import interface of the clinical information system (CIS). This procedure generated the required follow-up form and enqueued a link to it in a work list of the relating study nurses and study physicians, respectively. Results A HIS-based follow-up system automatically generated follow-up forms as defined by a clinical study protocol. These forms were scheduled into work lists of study nurses and study physicians. This system was integrated into the clinical workflow of two clinical studies. In a study from nuclear medicine, each scenario from the test concept according to the protocol of the single photon emission computer tomography/computer tomography (SPECT/CT) study was simulated and each scenario passed the test. For a study in psychiatry, 128 follow-up forms were automatically generated within 27 weeks, on average five forms per week (maximum 12, minimum 1 form per week). Conclusion HIS-based support of follow-up documentation in clinical studies is technically feasible and can support compliance with study protocols. PMID:23616857

Detecting resting-state functional connectivity in the language system using functional near-infrared spectroscopy

NASA Astrophysics Data System (ADS)

Zhang, Yu-Jin; Lu, Chun-Ming; Biswal, Bharat B.; Zang, Yu-Feng; Peng, Dan-Lin; Zhu, Chao-Zhe

2010-07-01

Functional connectivity has become one of the important approaches to understanding the functional organization of the human brain. Recently, functional near-infrared spectroscopy (fNIRS) was demonstrated as a feasible method to study resting-state functional connectivity (RSFC) in the sensory and motor systems. However, whether such fNIRS-based RSFC can be revealed in high-level and complex functional systems remains unknown. In the present study, the feasibility of such an approach is tested on the language system, of which the neural substrates have been well documented in the literature. After determination of a seed channel by a language localizer task, the correlation strength between the low frequency fluctuations of the fNIRS signal at the seed channel and those at all other channels is used to evaluate the language system RSFC. Our results show a significant RSFC between the left inferior frontal cortex and superior temporal cortex, components both associated with dominant language regions. Moreover, the RSFC map demonstrates left lateralization of the language system. In conclusion, the present study successfully utilized fNIRS-based RSFC to study a complex and high-level neural system, and provides further evidence for the validity of the fNIRS-based RSFC approach.

An emergency call system for patients in locked-in state using an SSVEP-based brain switch.

PubMed

Lim, Jeong-Hwan; Kim, Yong-Wook; Lee, Jun-Hak; An, Kwang-Ok; Hwang, Han-Jeong; Cha, Ho-Seung; Han, Chang-Hee; Im, Chang-Hwan

2017-11-01

Patients in a locked-in state (LIS) due to severe neurological disorders such as amyotrophic lateral sclerosis (ALS) require seamless emergency care by their caregivers or guardians. However, it is a difficult job for the guardians to continuously monitor the patients' state, especially when direct communication is not possible. In the present study, we developed an emergency call system for such patients using a steady-state visual evoked potential (SSVEP)-based brain switch. Although there have been previous studies to implement SSVEP-based brain switch system, they have not been applied to patients in LIS, and thus their clinical value has not been validated. In this study, we verified whether the SSVEP-based brain switch system can be practically used as an emergency call system for patients in LIS. The brain switch used for our system adopted a chromatic visual stimulus, which proved to be visually less stimulating than conventional checkerboard-type stimuli but could generate SSVEP responses strong enough to be used for brain-computer interface (BCI) applications. To verify the feasibility of our emergency call system, 14 healthy participants and 3 patients with severe ALS took part in online experiments. All three ALS patients successfully called their guardians to their bedsides in about 6.56 seconds. Furthermore, additional experiments with one of these patients demonstrated that our emergency call system maintains fairly good performance even up to 4 weeks after the first experiment without renewing initial calibration data. Our results suggest that our SSVEP-based emergency call system might be successfully used in practical scenarios. © 2017 Society for Psychophysiological Research.

A plastic scintillator-based 2D thermal neutron mapping system for use in BNCT studies.

PubMed

Ghal-Eh, N; Green, S

2016-06-01

In this study, a scintillator-based measurement instrument is proposed which is capable of measuring a two-dimensional map of thermal neutrons within a phantom based on the detection of 2.22MeV gamma rays generated via nth+H→D+γ reaction. The proposed instrument locates around a small rectangular water phantom (14cm×15cm×20cm) used in Birmingham BNCT facility. The whole system has been simulated using MCNPX 2.6. The results confirm that the thermal flux peaks somewhere between 2cm and 4cm distance from the system entrance which is in agreement with previous studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development and Testing of a M-Learning System for the Professional Development of Academics through Design-Based Action Research

ERIC Educational Resources Information Center

Keskin, Nilgun Ozdamar; Kuzu, Abdullah

2015-01-01

In the present study, a mobile learning system for the professional development of academics was developed by design based action research, and the perceptions and experiences of the academics using this system were examined. In the first phase of this design-based action research, the research question was defined. In the second phase, a…

GIS-based intersection inventory system (GIS-IIS) : integrating GIS, traffic signal data and intersection images

DOT National Transportation Integrated Search

2005-02-25

This study developed a GIS-based Intersection Inventory System (GIS-IIS) for the signalized : intersections on the state-maintained highway system of IDOT District 6. GIS-IIS is a tool to have an : easy access to intersection inventory data, photogra...

Simulated lumped-parameter system reduced-order adaptive control studies

NASA Technical Reports Server (NTRS)

Johnson, C. R., Jr.; Lawrence, D. A.; Taylor, T.; Malakooti, M. V.

1981-01-01

Two methods of interpreting the misbehavior of reduced order adaptive controllers are discussed. The first method is based on system input-output description and the second is based on state variable description. The implementation of the single input, single output, autoregressive, moving average system is considered.

Optimizing Input/Output Using Adaptive File System Policies

NASA Technical Reports Server (NTRS)

Madhyastha, Tara M.; Elford, Christopher L.; Reed, Daniel A.

1996-01-01

Parallel input/output characterization studies and experiments with flexible resource management algorithms indicate that adaptivity is crucial to file system performance. In this paper we propose an automatic technique for selecting and refining file system policies based on application access patterns and execution environment. An automatic classification framework allows the file system to select appropriate caching and pre-fetching policies, while performance sensors provide feedback used to tune policy parameters for specific system environments. To illustrate the potential performance improvements possible using adaptive file system policies, we present results from experiments involving classification-based and performance-based steering.

Computer-assisted audiovisual health history self-interviewing. Results of the pilot study of the Hoxworth Quality Donor System.

PubMed

Zuck, T F; Cumming, P D; Wallace, E L

2001-12-01

The safety of blood for transfusion depends, in part, on the reliability of the health history given by volunteer blood donors. To improve reliability, a pilot study evaluated the use of an interactive computer-based audiovisual donor interviewing system at a typical midwestern blood center in the United States. An interactive video screening system was tested in a community donor center environment on 395 volunteer blood donors. Of the donors using the system, 277 completed surveys regarding their acceptance of and opinions about the system. The study showed that an interactive computer-based audiovisual donor screening system was an effective means of conducting the donor health history. The majority of donors found the system understandable and favored the system over a face-to-face interview. Further, most donors indicated that they would be more likely to return if they were to be screened by such a system. Interactive computer-based audiovisual blood donor screening is useful and well accepted by donors; it may prevent a majority of errors and accidents that are reportable to the FDA; and it may contribute to increased safety and availability of the blood supply.

Study of a risk-based piping inspection guideline system.

PubMed

Tien, Shiaw-Wen; Hwang, Wen-Tsung; Tsai, Chih-Hung

2007-02-01

A risk-based inspection system and a piping inspection guideline model were developed in this study. The research procedure consists of two parts--the building of a risk-based inspection model for piping and the construction of a risk-based piping inspection guideline model. Field visits at the plant were conducted to develop the risk-based inspection and strategic analysis system. A knowledge-based model had been built in accordance with international standards and local government regulations, and the rational unified process was applied for reducing the discrepancy in the development of the models. The models had been designed to analyze damage factors, damage models, and potential damage positions of piping in the petrochemical plants. The purpose of this study was to provide inspection-related personnel with the optimal planning tools for piping inspections, hence, to enable effective predictions of potential piping risks and to enhance the better degree of safety in plant operations that the petrochemical industries can be expected to achieve. A risk analysis was conducted on the piping system of a petrochemical plant. The outcome indicated that most of the risks resulted from a small number of pipelines.

A web-based appointment system to reduce waiting for outpatients: a retrospective study.

PubMed

Cao, Wenjun; Wan, Yi; Tu, Haibo; Shang, Fujun; Liu, Danhong; Tan, Zhijun; Sun, Caihong; Ye, Qing; Xu, Yongyong

2011-11-22

Long waiting times for registration to see a doctor is problematic in China, especially in tertiary hospitals. To address this issue, a web-based appointment system was developed for the Xijing hospital. The aim of this study was to investigate the efficacy of the web-based appointment system in the registration service for outpatients. Data from the web-based appointment system in Xijing hospital from January to December 2010 were collected using a stratified random sampling method, from which participants were randomly selected for a telephone interview asking for detailed information on using the system. Patients who registered through registration windows were randomly selected as a comparison group, and completed a questionnaire on-site. A total of 5641 patients using the online booking service were available for data analysis. Of them, 500 were randomly selected, and 369 (73.8%) completed a telephone interview. Of the 500 patients using the usual queuing method who were randomly selected for inclusion in the study, responses were obtained from 463, a response rate of 92.6%. Between the two registration methods, there were significant differences in age, degree of satisfaction, and total waiting time (P<0.001). However, gender, urban residence, and valid waiting time showed no significant differences (P>0.05). Being ignorant of online registration, not trusting the internet, and a lack of ability to use a computer were three main reasons given for not using the web-based appointment system. The overall proportion of non-attendance was 14.4% for those using the web-based appointment system, and the non-attendance rate was significantly different among different hospital departments, day of the week, and time of the day (P<0.001). Compared to the usual queuing method, the web-based appointment system could significantly increase patient's satisfaction with registration and reduce total waiting time effectively. However, further improvements are needed for broad use of the system.

A center for commercial development of space: Real-time satellite mapping. Remote sensing-based agricultural information expert system

NASA Technical Reports Server (NTRS)

Hadipriono, Fabian C.; Diaz, Carlos F.; Merritt, Earl S.

1989-01-01

The research project results in a powerful yet user friendly CROPCAST expert system for use by a client to determine the crop yield production of a certain crop field. The study is based on the facts that heuristic assessment and decision making in agriculture are significant and dominate much of agribusiness. Transfer of the expert knowledge concerning remote sensing based crop yield production into a specific expert system is the key program in this study. A knowledge base consisting of a root frame, CROP-YIELD-FORECAST, and four subframes, namely, SATELLITE, PLANT-PHYSIOLOGY, GROUND, and MODEL were developed to accommodate the production rules obtained from the domain expert. The expert system shell Personal Consultant Plus version 4.0. was used for this purpose. An external geographic program was integrated to the system. This project is the first part of a completely built expert system. The study reveals that much effort was given to the development of the rules. Such effort is inevitable if workable, efficient, and accurate rules are desired. Furthermore, abundant help statements and graphics were included. Internal and external display routines add to the visual capability of the system. The work results in a useful tool for the client for making decisions on crop yield production.

Comparative acid-base properties of the surface of components of the CdTe-ZnS system in series of substitutional solid solutions and their analogs

NASA Astrophysics Data System (ADS)

Kirovskaya, I. A.; Kasatova, I. Yu.

2011-07-01

The acid-base properties of the surface of solid solutions and binary components of the CdTe-ZnS system are studied by hydrolytic adsorption, nonaqueous conductometric titration, mechanochemistry, IR spectroscopy, and Raman scattering spectroscopy. The strength, nature, and concentration of acid centers on the original surface and that exposed to CO are determined. The changes in acid-base properties in dependence on the composition of the system under investigation in the series of CdB6, ZnB6 analogs are studied.

Study on the weighing system based on optical fiber Bragg grating

NASA Astrophysics Data System (ADS)

Wang, Xiaona; Yu, Qingxu; Li, Yefang

2010-10-01

The optical fiber sensor based on wavelength demodulation such as fiber Bragg grating(FBG), with merits of immunity to electromagnetic interference, low drift and high precision, has been widely used in many areas, such as structural health monitoring and smart materials, and the wavelength demodulation system was also studied widely. In the paper, a weighing system based on FBG was studied. The optical source is broadband Erbium-doped fiber ring laser with a spectral range of 1500~1600nm and optical power of 2mW; A Fabry-Perot Etalon with orientation precision of 1pm was adopted as real-time wavelength calibration for the swept laser; and multichannel high resolution simultaneous sampling card was used in the system to acquire sensing signals simultaneously, thus high-resolution and real-time calibration of sweep-wavelength can be achieved. The FBG was adhered to a cantilever beam and the Bragg wavelength was demodulated with the system. The weighing system was done after calibrated with standard weight. Experimental results show that the resolution of the weighing system is 0.5 g with a full scale of 2Kg.

Adopting exergy analysis for use in aerospace

NASA Astrophysics Data System (ADS)

Hayes, David; Lone, Mudassir; Whidborne, James F.; Camberos, José; Coetzee, Etienne

2017-08-01

Thermodynamic analysis methods, based on an exergy metric, have been developed to improve system efficiency of traditional heat driven systems such as ground based power plants and aircraft propulsion systems. However, in more recent years interest in the topic has broadened to include applying these second law methods to the field of aerodynamics and complete aerospace vehicles. Work to date is based on highly simplified structures, but such a method could be shown to have benefit to the highly conservative and risk averse commercial aerospace sector. This review justifies how thermodynamic exergy analysis has the potential to facilitate a breakthrough in the optimization of aerospace vehicles based on a system of energy systems, through studying the exergy-based multidisciplinary design of future flight vehicles.

Research Collaboration across Higher Education Systems: Maturity, Language Use, and Regional Differences

ERIC Educational Resources Information Center

Shin, Jung Cheol; Lee, Soo Jeung; Kim, Yangson

2013-01-01

This study analyzed whether research collaboration patterns differ across higher education systems based on maturity of the systems, their language, and their geographical region. This study found that collaboration patterns differ across higher education systems: academics in developed systems are more collaborative than their colleagues in…

Science Assessments for All: Integrating Science Simulations into Balanced State Science Assessment Systems

ERIC Educational Resources Information Center

Quellmalz, Edys S.; Timms, Michael J.; Silberglitt, Matt D.; Buckley, Barbara C.

2012-01-01

This article reports on the collaboration of six states to study how simulation-based science assessments can become transformative components of multi-level, balanced state science assessment systems. The project studied the psychometric quality, feasibility, and utility of simulation-based science assessments designed to serve formative purposes…

Case Studies of Auditing in a Computer-Based Systems Environment.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

In response to a growing need for effective and efficient means for auditing computer-based systems, a number of studies dealing primarily with batch-processing type computer operations have been conducted to explore the impact of computers on auditing activities in the Federal Government. This report first presents some statistical data on…

Relationship between Principal Leadership and the Implementation of a Proficiency Based Graduation System

ERIC Educational Resources Information Center

Whaley, Michael

2011-01-01

This research study investigated the relationship between high school principals. perceptions of their leadership and the implementation of the Rhode Island diploma system. The study also explored the changing nature of the role of principal in relation to the Proficiency Based Graduation Requirements (PBGR) and leadership skills used by…

Ethiopian New Public Universities: Achievements, Challenges and Illustrative Case Studies

ERIC Educational Resources Information Center

van Deuren, Rita; Kahsu, Tsegazeab; Mohammed, Seid; Woldie, Wondimu

2016-01-01

Purpose: This paper aims to analyze and illustrate achievements and challenges of Ethiopian higher education, both at the system level and at the level of new public universities. Design/methodology/approach: Achievements and challenges at the system level are based on literature review and secondary data. Illustrative case studies are based on…

Practicum-Based Approach to Bridge between Information-Systems Industry Expectations and Graduates Qualifications

ERIC Educational Resources Information Center

Lavy, Ilana

2017-01-01

In this study, a practicum-based approach to bridge the gap between industry expectations and Information Systems graduates skills is presented and discussed. Students participate in the practicum project during their last study year, and take part in various professional activities in the industry in accordance with their professional aspirations…

Case for Deploying Complex Systems Utilizing Commodity Components

NASA Technical Reports Server (NTRS)

Bryant, Barry S.; Pitts, R. Lee; Ritter, George

2003-01-01

This viewgraph representation presents a study of the transition of computer networks and software engineering at the Huntsville Operations Support Center (HOSC) from a client/server UNIX based system to a client/server system based on commodity priced and open system components. Topics covered include: an overview of HOSC ground support systems, an analysis for changes to the existing ground support system, an analysis of options considered for the transition to a new system, and a consideration of goals for a new system.

Evaluation of a hydrogen peroxide-based system for high-level disinfection of vaginal ultrasound probes.

PubMed

Johnson, Stephen; Proctor, Matthew; Bluth, Edward; Smetherman, Dana; Baumgarten, Katherine; Troxclair, Laurie; Bienvenu, Michele

2013-10-01

Because of the complex process and the risk of errors associated with the glutaraldehyde-based solutions previously used at our institution for disinfection, our department has implemented a new method for high-level disinfection of vaginal ultrasound probes: the hydrogen peroxide-based Trophon system (Nanosonics, Alexandria, New South Wales, Australia). The aim of this study was to compare the time difference, safety, and sonographers' satisfaction between the glutaraldehyde-based Cidex (CIVCO Medical Solutions, Kalona, IA) and the hydrogen peroxide-based Trophon disinfection systems. The Institutional Review Board approved a 14-question survey administered to the 13 sonographers in our department. Survey questions addressed a variety of aspects of the disinfection processes with graded responses over a standardized 5-point scale. A process diagram was developed for each disinfection method with segmental timing analysis, and a cost analysis was performed. Nonvariegated analysis of the survey data with the Wilcoxon signed rank test showed a statistical difference in survey responses in favor of the hydrogen peroxide-based system over the glutaraldehyde-based system regarding efficiency (P = .0013), ease of use (P = .0013), ability to maintain work flow (P = .026), safety (P = .0026), fixing problems (P = .0158), time (P = .0011), and overall satisfaction (P = .0018). The glutaraldehyde-based system took 32 minutes versus 14 minutes for the hydrogen peroxide-based system; the hydrogen peroxide-based system saved on average 7.5 hours per week. The cost of the hydrogen peroxide-based system and weekly maintenance pays for itself if 1.5 more ultrasound examinations are performed each week. The hydrogen peroxide-based disinfection system was proven to be more efficient and viewed to be easier and safer to use than the glutaraldehyde-based system. The adoption of the hydrogen peroxide-based system led to higher satisfaction among sonographers.

Prognostic scoring systems for myelodysplastic syndromes (MDS) in a population-based setting: a report from the Swedish MDS register.

PubMed

Moreno Berggren, Daniel; Folkvaljon, Yasin; Engvall, Marie; Sundberg, Johan; Lambe, Mats; Antunovic, Petar; Garelius, Hege; Lorenz, Fryderyk; Nilsson, Lars; Rasmussen, Bengt; Lehmann, Sören; Hellström-Lindberg, Eva; Jädersten, Martin; Ejerblad, Elisabeth

2018-06-01

The myelodysplastic syndromes (MDS) have highly variable outcomes and prognostic scoring systems are important tools for risk assessment and to guide therapeutic decisions. However, few population-based studies have compared the value of the different scoring systems. With data from the nationwide Swedish population-based MDS register we validated the International Prognostic Scoring System (IPSS), revised IPSS (IPSS-R) and the World Health Organization (WHO) Classification-based Prognostic Scoring System (WPSS). We also present population-based data on incidence, clinical characteristics including detailed cytogenetics and outcome from the register. The study encompassed 1329 patients reported to the register between 2009 and 2013, 14% of these had therapy-related MDS (t-MDS). Based on the MDS register, the yearly crude incidence of MDS in Sweden was 2·9 per 100 000 inhabitants. IPSS-R had a significantly better prognostic power than IPSS (P < 0·001). There was a trend for better prognostic power of IPSS-R compared to WPSS (P = 0·05) and for WPSS compared to IPSS (P = 0·07). IPSS-R was superior to both IPSS and WPSS for patients aged ≤70 years. Patients with t-MDS had a worse outcome compared to de novo MDS (d-MDS), however, the validity of the prognostic scoring systems was comparable for d-MDS and t-MDS. In conclusion, population-based studies are important to validate prognostic scores in a 'real-world' setting. In our nationwide cohort, the IPSS-R showed the best predictive power. © 2018 John Wiley & Sons Ltd.

The Impact of Computer-Based Information Systems Upon School and School District Administration.

ERIC Educational Resources Information Center

Hansen, Thomas; And Others

1978-01-01

This study investigates the ways in which computer-based information systems interact with the strategic planning, management control, and operational control in 11 Minnesota school districts. (Author/IRT)

Impact of a computerized physician order entry system on nurse-physician collaboration in the medication process.

PubMed

Pirnejad, Habibollah; Niazkhani, Zahra; van der Sijs, Heleen; Berg, Marc; Bal, Roland

2008-11-01

Due to their efficiency and safety potential, computerized physician order entry (CPOE) systems are gaining considerable attention in in-patient settings. However, recent studies have shown that these systems may undermine the efficiency and safety of the medication process by impeding nurse-physician collaboration. To evaluate the effects of a CPOE system on the mechanisms whereby nurses and physicians maintain their collaboration in the medication process. SETTING AND METHODOLOGY: Six internal medicine wards at the Erasmus Medical Centre were included in this study. A questionnaire was used to record nurses' attitudes towards the effectiveness of the former paper-based system. A similar questionnaire was used to evaluate nurses' attitudes with respect to a CPOE system that replaced the paper-based system. The data were complemented and triangulated through interviews with physicians and nurses. Response rates for the analyzed questions in the pre- and post-implementation questionnaires were 54.3% (76/140) and 52.14% (73/140). The CPOE system had a mixed impact on medication work: while it improved the main non-supportive features of the paper-based system, it lacked its main supportive features. The interviews revealed more detailed supportive and non-supportive features of the two systems. A comparison of supportive features of the paper-based system with non-supportive features of the CPOE system showed that synchronisation and feedback mechanisms in nurse-physician collaborations have been impaired after the CPOE system was introduced. This study contributes to an understanding of the affected mechanisms in nurse-physician collaboration using a CPOE system. It provides recommendations for repairing the impaired mechanisms and for redesigning the CPOE system and thus for better supporting these structures.

Molecular engineering of phosphole-based conjugated materials

NASA Astrophysics Data System (ADS)

Ren, Yi

The work in this thesis focuses on the molecular engineering of phosphorus-based conjugated materials. In the first part (Chapters Two and Three), new phosphorus-based conjugated systems were designed and synthesized to study the effect of the heteroelement on the electronic properties of the π-conjugated systems. The second part (Chapters Four and Five) deals with the self-assembly features of specifically designed phosphorus-based conjugated systems. In Chapter Two, electron-poor and electron-rich aromatic substituents were introduced to the dithienophosphole core in order to balance the electron-accepting and electron-donating character of the systems. Furthermore, an intriguing intramolecular charge transfer process could be observed between two dithienophosphole cores in a bridged bisphosphole-system. In Chapter Three, a secondary heteroelement (Si, P, S) was incorporated in the phosphorus-based conjugated systems. Extensive structure-property studies revealed that the secondary heteroelement can effectively manipulate the communication in phosphinine-based systems. The study of a heterotetracene system allowed for selectively applying distinct heteroatom (S/P) chemistries, which offers a powerful tool for the modification of the electronic structure of the system. More importantly, the heteroatom-specific electronic nature (S/P) can be utilized to selectively control different photophysical aspects (energy gap and fluorescence quantum yield). Furthermore, additional molecular engineering of the heterotetracene provided access to well-defined 1D microstructures, which opened the door for designing multi-functional self-assembled phosphorus-based materials. In Chapter Four, the self-organizing phosphole-lipid system is introduced, which combines the features of phospholipids with the electronics of phospholes. Its amphiphilic nature induces intriguing self-assembly features - liquid crystal and soft crystal architectures, both exhibiting well-organized lamellar structure at a wide range of temperatures. Importantly, its dynamic structure endows the phosphole-lipid system with intriguing external stimuli-responsive features allowing for the modification of the emission of the system without further chemical modification. Chapter Five describes how further molecular engineering allowed for access to a series of new highly fluorescent phosphole-lipid organogels. Remarkably, the external-stimuli responsive features of the system can be amplified in a donor-acceptor system accessible through changes in long distance fluorescence resonance energy transfer processes. In addition, the first fluorescent liquid phospholes could also be accessed in the context of the work on the new phosphole-lipid system.

Structure and functioning of the acid-base system in the Baltic Sea

NASA Astrophysics Data System (ADS)

Kuliński, Karol; Schneider, Bernd; Szymczycha, Beata; Stokowski, Marcin

2017-12-01

The marine acid-base system is relatively well understood for oceanic waters. Its structure and functioning is less obvious for the coastal and shelf seas due to a number of regionally specific anomalies. In this review article we collect and integrate existing knowledge of the acid-base system in the Baltic Sea. Hydrographical and biogeochemical characteristics of the Baltic Sea, as manifested in horizontal and vertical salinity gradients, permanent stratification of the water column, eutrophication, high organic-matter concentrations and high anthropogenic pressure, make the acid-base system complex. In this study, we summarize the general knowledge of the marine acid-base system as well as describe the peculiarities identified and reported for the Baltic Sea specifically. In this context we discuss issues such as dissociation constants in brackish water, different chemical alkalinity models including contributions by organic acid-base systems, long-term changes in total alkalinity, anomalies of borate alkalinity, and the acid-base effects of biomass production and mineralization. Finally, we identify research gaps and specify limitations concerning the Baltic Sea acid-base system.

Filmless versus film-based systems in radiographic examination costs: an activity-based costing method.

PubMed

Muto, Hiroshi; Tani, Yuji; Suzuki, Shigemasa; Yokooka, Yuki; Abe, Tamotsu; Sase, Yuji; Terashita, Takayoshi; Ogasawara, Katsuhiko

2011-09-30

Since the shift from a radiographic film-based system to that of a filmless system, the change in radiographic examination costs and costs structure have been undetermined. The activity-based costing (ABC) method measures the cost and performance of activities, resources, and cost objects. The purpose of this study is to identify the cost structure of a radiographic examination comparing a filmless system to that of a film-based system using the ABC method. We calculated the costs of radiographic examinations for both a filmless and a film-based system, and assessed the costs or cost components by simulating radiographic examinations in a health clinic. The cost objects of the radiographic examinations included lumbar (six views), knee (three views), wrist (two views), and other. Indirect costs were allocated to cost objects using the ABC method. The costs of a radiographic examination using a filmless system are as follows: lumbar 2,085 yen; knee 1,599 yen; wrist 1,165 yen; and other 1,641 yen. The costs for a film-based system are: lumbar 3,407 yen; knee 2,257 yen; wrist 1,602 yen; and other 2,521 yen. The primary activities were "calling patient," "explanation of scan," "take photographs," and "aftercare" for both filmless and film-based systems. The cost of these activities cost represented 36.0% of the total cost for a filmless system and 23.6% of a film-based system. The costs of radiographic examinations using a filmless system and a film-based system were calculated using the ABC method. Our results provide clear evidence that the filmless system is more effective than the film-based system in providing greater value services directly to patients.

Filmless versus film-based systems in radiographic examination costs: an activity-based costing method

PubMed Central

2011-01-01

Background Since the shift from a radiographic film-based system to that of a filmless system, the change in radiographic examination costs and costs structure have been undetermined. The activity-based costing (ABC) method measures the cost and performance of activities, resources, and cost objects. The purpose of this study is to identify the cost structure of a radiographic examination comparing a filmless system to that of a film-based system using the ABC method. Methods We calculated the costs of radiographic examinations for both a filmless and a film-based system, and assessed the costs or cost components by simulating radiographic examinations in a health clinic. The cost objects of the radiographic examinations included lumbar (six views), knee (three views), wrist (two views), and other. Indirect costs were allocated to cost objects using the ABC method. Results The costs of a radiographic examination using a filmless system are as follows: lumbar 2,085 yen; knee 1,599 yen; wrist 1,165 yen; and other 1,641 yen. The costs for a film-based system are: lumbar 3,407 yen; knee 2,257 yen; wrist 1,602 yen; and other 2,521 yen. The primary activities were "calling patient," "explanation of scan," "take photographs," and "aftercare" for both filmless and film-based systems. The cost of these activities cost represented 36.0% of the total cost for a filmless system and 23.6% of a film-based system. Conclusions The costs of radiographic examinations using a filmless system and a film-based system were calculated using the ABC method. Our results provide clear evidence that the filmless system is more effective than the film-based system in providing greater value services directly to patients. PMID:21961846

An experimental maintenance management system.

DOT National Transportation Integrated Search

1979-01-01

The purpose of this study was to evaluate Virginia's maintenance management system and to recommend modifications directed at improving it. The study revealed that (1) the current system of allocating maintenance monies is based upon centerline milea...

Design and Validation of a Radio-Frequency Identification-Based Device for Routinely Assessing Gait Speed in a Geriatrics Clinic.

PubMed

Barry, Lisa C; Hatchman, Laura; Fan, Zhaoyan; Guralnik, Jack M; Gao, Robert X; Kuchel, George A

2018-05-01

To evaluate the feasibility, acceptability, and validity of a radio-frequency identification (RFID)-based system to measure gait speed in a clinical setting as a first step to using unobtrusive gait speed assessment in routine clinical care. Feasibility study comparing gait speed assessed using an RFID-based system with gait speed assessed using handheld stopwatch, the criterion standard. Outpatient geriatrics clinic at a Connecticut-based academic medical center. Clinic attendees who could walk independently with or without an assistive device (N=50) and healthcare providers (N=9). Gait speed was measured in twice using 2 methods each time before participants entered an examination room. Participants walked at their usual pace while gait speed was recorded simultaneously using the RFID-based system and a handheld stopwatch operated by a trained study investigator. After 2 trials, participants completed a brief survey regarding their experience. At the end of the study period, clinic healthcare providers completed a separate survey. Test-retest reliability of the RFID-based system was high (intraclass correlation coefficient = 0.953). The mean difference ± standard deviation in gait speed between the RFID-based system and the stopwatch was -0.003±0.035 m/s (p=.53) and did not differ significantly according to age, sex, or use of an assistive walking aid. Acceptability of the device was high, and 8 of 9 providers indicated that measuring gait speed using the RFID-based system should be a part of routine clinical care. RFID technology may offer a practical means of overcoming barriers to routine measurement of gait speed in real-world outpatient clinical settings. © 2018, Copyright the Authors Journal compilation © 2018, The American Geriatrics Society.

Workflow and Electronic Health Records in Small Medical Practices

PubMed Central

Ramaiah, Mala; Subrahmanian, Eswaran; Sriram, Ram D; Lide, Bettijoyce B

2012-01-01

This paper analyzes the workflow and implementation of electronic health record (EHR) systems across different functions in small physician offices. We characterize the differences in the offices based on the levels of computerization in terms of workflow, sources of time delay, and barriers to using EHR systems to support the entire workflow. The study was based on a combination of questionnaires, interviews, in situ observations, and data collection efforts. This study was not intended to be a full-scale time-and-motion study with precise measurements but was intended to provide an overview of the potential sources of delays while performing office tasks. The study follows an interpretive model of case studies rather than a large-sample statistical survey of practices. To identify time-consuming tasks, workflow maps were created based on the aggregated data from the offices. The results from the study show that specialty physicians are more favorable toward adopting EHR systems than primary care physicians are. The barriers to adoption of EHR systems by primary care physicians can be attributed to the complex workflows that exist in primary care physician offices, leading to nonstandardized workflow structures and practices. Also, primary care physicians would benefit more from EHR systems if the systems could interact with external entities. PMID:22737096

Surf-zone Underwater Robotic Demonstration Platform

DTIC Science & Technology

2014-01-01

dynamically advantageous shape for a robotic system. To address locomotive factors ARA completed a research and technical study based on an Archimedes ...effective hull shape. To study mobility and traction a propulsion system based on an Archimedes screw drive was used. A drive design based on an... Archimedes screw was chosen because of its ability to operate in various mediums with varying flow rates. A test bed was designed and assembled in order to

Analysis of curricular reform practices at Chinese medical schools.

PubMed

Huang, Lei; Cai, Qiaoling; Cheng, Liming; Kosik, Russell; Mandell, Greg; Wang, Shuu-Jiun; Xu, Guo-Tong; Fan, Angela P

2014-01-01

A comprehensive search of the literature published between 2001 and 2010 was performed to gain a greater understanding of curricular reform practices at Chinese medical schools. There were 10,948 studies published between 2001 and 2010 that were retrieved from the database. Following preliminary screening, 76 publications from 49 different medical schools were selected. Thirty-one publications regarding clinical medicine curricular reforms were analyzed further. Of the 76 studies, 53 described curricular reforms that were instituted in theoretical courses, 22 described curricular reforms that were instituted in experimental courses, and 1 described curricular reforms that were instituted in a clinical skills training course. Of the 31 clinical medicine publications, 2 described reforms that were implemented for 3-year program medical students, 12 described reforms that were implemented for 5-year program medical students, 6 described reforms that were implemented for 7-year program medical students, and 2 described reforms that were implemented for 8-year program medical students. Currently, the majority of medical schools in China use the discipline-based curriculum model. Thirteen studies described transition to an organ-system-based curriculum model, 1 study described transition to a problem-based curriculum model, and 3 studies described transition to a clinical presentation-based curriculum model. In 7 studies educators decided to retain the discipline-based curriculum model while integrating 1 or several new courses to remedy the weaker aspects of the traditional curriculum, in 7 studies educators decided to integrate the preclinical courses with the clinical courses by using the systemic-integrating curricular system that dilutes classical disciplines and integrates material based on organ systems, and in 2 studies educators limited reforms to clinical courses only. Eight studies discussed the implementation of a formative evaluation system, 4 studies discussed faculty training, and 15 studies discussed the application of various instructional methods. Other issues that were also addressed include enhancing research, improving patient-doctor communication, developing interpersonal and teamwork skills, cultivating independent lifelong learning habits, and improving problem-solving capabilities. The medical schools in our study have adopted various comprehensive curricular changes, moving from a knowledge-based to a competency-based model, and from traditional standards to international standards. Many institutions face challenges when implementing curricular reforms, such as what to integrate and how to do so, the unintended omission of important material, ensuring coordination between different organizations and departments, and the training of faculty.

High School Students' Written Argumentation Qualities with Problem-Based Computer-Aided Material (PBCAM) Designed about Human Endocrine System

ERIC Educational Resources Information Center

Vekli, Gülsah Sezen; Çimer, Atilla

2017-01-01

This study investigated development of students' scientific argumentation levels in the applications made with Problem-Based Computer-Aided Material (PBCAM) designed about Human Endocrine System. The case study method was used: The study group was formed of 43 students in the 11th grade of the science high school in Rize. Human Endocrine System…

Leadership Strategies in Implementation of High-School Standards-Based Grading Systems

ERIC Educational Resources Information Center

Pritzl, Jerome

2016-01-01

This multi-site case study examined leadership strategies used during successful implementation of standards-based grading systems in three Wisconsin high schools. It found that leaders' reported commitment, patience, and persistence showed evidence of sustainable, high-functioning systems. It drew two main conclusions: first, school leaders need…

Image-Based Medical Expert Teleconsultation in Acute Care of Injuries. A Systematic Review of Effects on Information Accuracy, Diagnostic Validity, Clinical Outcome, and User Satisfaction

PubMed Central

Hasselberg, Marie; Beer, Netta; Blom, Lisa; Wallis, Lee A.; Laflamme, Lucie

2014-01-01

Objective To systematically review the literature on image-based telemedicine for medical expert consultation in acute care of injuries, considering system, user, and clinical aspects. Design Systematic review of peer-reviewed journal articles. Data sources Searches of five databases and in eligible articles, relevant reviews, and specialized peer-reviewed journals. Eligibility criteria Studies were included that covered teleconsultation systems based on image capture and transfer with the objective of seeking medical expertise for the diagnostic and treatment of acute injury care and that presented the evaluation of one or several aspects of the system based on empirical data. Studies of systems not under routine practice or including real-time interactive video conferencing were excluded. Method The procedures used in this review followed the PRISMA Statement. Predefined criteria were used for the assessment of the risk of bias. The DeLone and McLean Information System Success Model was used as a framework to synthesise the results according to system quality, user satisfaction, information quality and net benefits. All data extractions were done by at least two reviewers independently. Results Out of 331 articles, 24 were found eligible. Diagnostic validity and management outcomes were often studied; fewer studies focused on system quality and user satisfaction. Most systems were evaluated at a feasibility stage or during small-scale pilot testing. Although the results of the evaluations were generally positive, biases in the methodology of evaluation were concerning selection, performance and exclusion. Gold standards and statistical tests were not always used when assessing diagnostic validity and patient management. Conclusions Image-based telemedicine systems for injury emergency care tend to support valid diagnosis and influence patient management. The evidence relates to a few clinical fields, and has substantial methodological shortcomings. As in the case of telemedicine in general, user and system quality aspects are poorly documented, both of which affect scale up of such programs. PMID:24887257

Designing Home-Based Telemedicine Systems for the Geriatric Population: An Empirical Study.

PubMed

Narasimha, Shraddhaa; Agnisarman, Sruthy; Chalil Madathil, Kapil; Gramopadhye, Anand; McElligott, James T

2018-02-01

Background and Introduction: Telemedicine, the process of providing healthcare remotely using communication devices, has the potential to be useful for the geriatric population when specifically designed for this age group. This study explored the design of four video telemedicine systems currently available and outlined issues with these systems that impact usability among the geriatric population. Based on the results, design suggestions were developed to improve telemedicine systems for this population. Using a between-subjects experimental design, the study considered four telemedicine systems used in Medical University of South Carolina. The study was conducted at a local retirement home. The participant pool consisted of 40 adults, 60 years or older. The dependent measures used were the mean times for telemedicine session initiation and video session, mean number of errors, post-test satisfaction ratings, the NASA-Task Load Index (NASA-TLX) workload measures, and the IBM-Computer Systems Usability Questionnaire measures. Statistical significance was found among the telemedicine systems' initiation times. The analysis of the qualitative data revealed several issues, including lengthy e-mail content, icon placement, and chat box design, which affect the usability of these systems for the geriatric population. Human factor-based design modifications, including short, precise e-mail content, appropriately placed icons, and the inclusion of instructions, are recommended to address the issues found in the qualitative study.

Nanoscale hybrid systems based on carbon nanotubes for biological sensing and control

PubMed Central

Cho, Youngtak; Shin, Narae; Kim, Daesan; Park, Jae Yeol

2017-01-01

This paper provides a concise review on the recent development of nanoscale hybrid systems based on carbon nanotubes (CNTs) for biological sensing and control. CNT-based hybrid systems have been intensively studied for versatile applications of biological interfaces such as sensing, cell therapy and tissue regeneration. Recent advances in nanobiotechnology not only enable the fabrication of highly sensitive biosensors at nanoscale but also allow the applications in the controls of cell growth and differentiation. This review describes the fabrication methods of such CNT-based hybrid systems and their applications in biosensing and cell controls. PMID:28188158

Matrix Failure Modes and Effects Analysis as a Knowledge Base for a Real Time Automated Diagnosis Expert System

NASA Technical Reports Server (NTRS)

Herrin, Stephanie; Iverson, David; Spukovska, Lilly; Souza, Kenneth A. (Technical Monitor)

1994-01-01

Failure Modes and Effects Analysis contain a wealth of information that can be used to create the knowledge base required for building automated diagnostic Expert systems. A real time monitoring and diagnosis expert system based on an actual NASA project's matrix failure modes and effects analysis was developed. This Expert system Was developed at NASA Ames Research Center. This system was first used as a case study to monitor the Research Animal Holding Facility (RAHF), a Space Shuttle payload that is used to house and monitor animals in orbit so the effects of space flight and microgravity can be studied. The techniques developed for the RAHF monitoring and diagnosis Expert system are general enough to be used for monitoring and diagnosis of a variety of other systems that undergo a Matrix FMEA. This automated diagnosis system was successfully used on-line and validated on the Space Shuttle flight STS-58, mission SLS-2 in October 1993.

Using a data base management system for modelling SSME test history data

NASA Technical Reports Server (NTRS)

Abernethy, K.

1985-01-01

The usefulness of a data base management system (DBMS) for modelling historical test data for the complete series of static test firings for the Space Shuttle Main Engine (SSME) was assessed. From an analysis of user data base query requirements, it became clear that a relational DMBS which included a relationally complete query language would permit a model satisfying the query requirements. Representative models and sample queries are discussed. A list of environment-particular evaluation criteria for the desired DBMS was constructed; these criteria include requirements in the areas of user-interface complexity, program independence, flexibility, modifiability, and output capability. The evaluation process included the construction of several prototype data bases for user assessement. The systems studied, representing the three major DBMS conceptual models, were: MIRADS, a hierarchical system; DMS-1100, a CODASYL-based network system; ORACLE, a relational system; and DATATRIEVE, a relational-type system.

Unobtrusive measurement of indoor energy expenditure using an infrared sensor-based activity monitoring system.

PubMed

Hwang, Bosun; Han, Jonghee; Choi, Jong Min; Park, Kwang Suk

2008-11-01

The purpose of this study was to develop an unobtrusive energy expenditure (EE) measurement system using an infrared (IR) sensor-based activity monitoring system to measure indoor activities and to estimate individual quantitative EE. IR-sensor activation counts were measured with a Bluetooth-based monitoring system and the standard EE was calculated using an established regression equation. Ten male subjects participated in the experiment and three different EE measurement systems (gas analyzer, accelerometer, IR sensor) were used simultaneously in order to determine the regression equation and evaluate the performance. As a standard measurement, oxygen consumption was simultaneously measured by a portable metabolic system (Metamax 3X, Cortex, Germany). A single room experiment was performed to develop a regression model of the standard EE measurement from the proposed IR sensor-based measurement system. In addition, correlation and regression analyses were done to compare the performance of the IR system with that of the Actigraph system. We determined that our proposed IR-based EE measurement system shows a similar correlation to the Actigraph system with the standard measurement system.

Making a Case for a Blended Approach: The Need for The Design-Based Case Study

ERIC Educational Resources Information Center

Deaton, Cynthia C. M.; Malloy, Jacquelynn A.

2017-01-01

Design-based case studies address research questions that involve instructional innovations within a bounded system. This blend of case study and design-based research provides a systematic approach to examining instructional innovations that are bounded by perspective, context, and time. Design-based case studies provide a framework for engaging…

Lunar surface base propulsion system study, volume 1

NASA Technical Reports Server (NTRS)

1987-01-01

The efficiency, capability, and evolution of a lunar base will be largely dependent on the transportation system that supports it. Beyond Space Station in low Earth orbit (LEO), a Lunar-derived propellant supply could provide the most important resource for the transportation infrastructure. The key to an efficient Lunar base propulsion system is the degree of Lunar self-sufficiency (from Earth supply) and reasonable propulsion system performance. Lunar surface propellant production requirements must be accounted in the measurement of efficiency of the entire space transportation system. Of all chemical propellant/propulsion systems considered, hydrogen/oxygen (H/O) OTVs appear most desirable, while both H/O and aluminum/oxygen propulsion systems may be considered for the lander. Aluminized-hydrogen/oxygen and Silane/oxygen propulsion systems are also promising candidates. Lunar propellant availability and processing techniques, chemical propulsion/vehicle design characteristics, and the associated performance of the total transportation infrastructure are reviewed, conceptual propulsion system designs and vehicle/basing concepts, and technology requirements are assessed in context of a Lunar Base mission scenario.

An investigation of the efficacy of electronic consenting interfaces of research permissions management system in a hospital setting

PubMed Central

Madathil, Kapil Chalil; Koikkara, Reshmi; Obeid, Jihad; Greenstein, Joel S.; Sanderson, Iain C.; Fryar, Katrina; Moskowitz, Jay; Gramopadhye, Anand K.

2013-01-01

Purpose Ethical and legal requirements for healthcare providers in the United States, stipulate that patients sign a consent form prior to undergoing medical treatment or participating in a research study. Currently, the majority of the hospitals obtain these consents using paper-based forms, which makes patient preference data cumbersome to store, search and retrieve. To address these issues, Health Sciences of South Carolina (HSSC), a collaborative of academic medical institutions and research universities in South Carolina, is developing an electronic consenting system, the Research Permissions Management System (RPMS). This article reports the findings of a study conducted to investigate the efficacy of the two proposed interfaces for this system – an iPad-based and touchscreen-based by comparing them to the paper-based and Topaz-based systems currently in use. Methods This study involved 50 participants: 10 hospital admission staff and 40 patients. The four systems were compared with respect to the time taken to complete the consenting process, the number of errors made by the patients, the workload experienced by the hospital staff and the subjective ratings of both patients and staff on post-test questionnaires. Results The results from the empirical study indicated no significant differences in the time taken to complete the tasks. More importantly, the participants found the new systems more usable than the conventional methods with the registration staff experiencing the least workload in the iPad and touchscreen-based conditions and the patients experiencing more privacy and control during the consenting process with the proposed electronic systems. In addition, they indicated better comprehension and awareness of what they were signing using the new interfaces. Discussion The results indicate the two methods proposed for capturing patient consents are at least as effective as the conventional methods, and superior in several important respects. While more research is needed, these findings suggest the viability of cautious adoption of electronic consenting systems, especially because these new systems appear to address the challenge of identifying the participants required for the complex research being conducted as the result of advances in the biomedical sciences. PMID:23757370

SULFATE RADICAL-BASED FERROUS-PEROXYMONOSULFATE OXIDATIVE SYSTEM FOR PCBs DEGRADATION IN AQUEOUS AND SEDIMENT SYSTEMS

EPA Science Inventory

Polychlorinated biphenyls (PCBs) in the environment pose long-term risk to public health because of their persistent and toxic nature. This study investigates the degradation of PCBs using sulfate radical-based advanced oxidation processes (SR-AOPs). These processes are based o...

Simulating Retail Banking for Banking Students

ERIC Educational Resources Information Center

Supramaniam, Mahadevan; Shanmugam, Bala

2009-01-01

The purpose of this study was to examine the implementation flow and development of retail bank management simulation based training system which could provide a comprehensive knowledge about the operations and management of banks for the banking students. The prototype of a Retail banking simulation based training system was developed based on…

System reliability of randomly vibrating structures: Computational modeling and laboratory testing

NASA Astrophysics Data System (ADS)

Sundar, V. S.; Ammanagi, S.; Manohar, C. S.

2015-09-01

The problem of determination of system reliability of randomly vibrating structures arises in many application areas of engineering. We discuss in this paper approaches based on Monte Carlo simulations and laboratory testing to tackle problems of time variant system reliability estimation. The strategy we adopt is based on the application of Girsanov's transformation to the governing stochastic differential equations which enables estimation of probability of failure with significantly reduced number of samples than what is needed in a direct simulation study. Notably, we show that the ideas from Girsanov's transformation based Monte Carlo simulations can be extended to conduct laboratory testing to assess system reliability of engineering structures with reduced number of samples and hence with reduced testing times. Illustrative examples include computational studies on a 10-degree of freedom nonlinear system model and laboratory/computational investigations on road load response of an automotive system tested on a four-post test rig.

Small space station electrical power system design concepts

NASA Technical Reports Server (NTRS)

Jones, G. M.; Mercer, L. N.

1976-01-01

A small manned facility, i.e., a small space station, placed in earth orbit by the Shuttle transportation system would be a viable, cost effective addition to the basic Shuttle system to provide many opportunities for R&D programs, particularly in the area of earth applications. The small space station would have many similarities with Skylab. This paper presents design concepts for an electrical power system (EPS) for the small space station based on Skylab experience, in-house work at Marshall Space Flight Center, SEPS (Solar Electric Propulsion Stage) solar array development studies, and other studies sponsored by MSFC. The proposed EPS would be a solar array/secondary battery system. Design concepts expressed are based on maximizing system efficiency and five year operational reliability. Cost, weight, volume, and complexity considerations are inherent in the concepts presented. A small space station EPS based on these concepts would be highly efficient, reliable, and relatively inexpensive.

Approach to building knowledge bases in information-measuring systems diagnostics of acute leukemias

NASA Astrophysics Data System (ADS)

Nikitaev, V. G.; Pronichev, A. N.; Polyakov, E. V.; Dmitrieva, V. V.

2018-01-01

The paper describes an approach for the formation of the reference base of peripheral blood cells and bone marrow in information-measuring systems of acute leukemia diagnostics. The proposed approach has allowed to create a system, that is enable peer evaluation of blood cells needed for the training of recognition systems when carrying out microscopic studies.

Study of Personalized Network Tutoring System Based on Emotional-cognitive Interaction

NASA Astrophysics Data System (ADS)

Qi, Manfei; Ma, Ding; Wang, Wansen

Aiming at emotion deficiency in present Network tutoring system, a lot of negative effects is analyzed and corresponding countermeasures are proposed. The model of Personalized Network tutoring system based on Emotional-cognitive interaction is constructed in the paper. The key techniques of realizing the system such as constructing emotional model and adjusting teaching strategies are also introduced.

The Use of a Web-Based Course Management System: Causes and Performance Effects

ERIC Educational Resources Information Center

Ring, J. Kirk; Kellermanns, Franz W.; Barnett, Tim; Pearson, Allison W.; Pearson, Rodney A.

2013-01-01

This article reports the results of two studies that examined (a) students' intentions to use a web-based course management system, (b) their actual use of a course management system, and (c) the effect of their use of a course management system on classroom performance. We found that students' attitudes toward the course management…

Addressing mental health epidemic among university students via web-based, self-screening, and referral system: a preliminary study.

PubMed

Kim, Eung-Hun; Coumar, Anil; Lober, William B; Kim, Yongmin

2011-03-01

The prevalence and severity of mental health problems in college and university communities are alarming. However, the majority of students with mental disorders do not seek help from professionals. To help students assess their mental conditions and encourage them to take an active role in seeking care, we developed a web-based self-screening, referral, and secure communication system and evaluated it at the University of Washington for 17 months. The system handled more than 1000 screenings during the study period. Of the subjects who used the system, 75% noted that the system helped them to make a decision to receive help from professionals. The system was able to provide outreach to students with mental health concerns effectively, allow them to self-screen their conditions, and encourage them to receive professional assistance. The system provided students with 24/7 web-based access to the clinic, and more than 50% of the system use was made during off-hours. The system was well received by patients, referral managers, and care providers, and it was transferred to the clinic for daily clinical use. We believe that a web-based system like ours could be used as one way to tackle the growing epidemic of mental health problems among college and university students.

Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

NASA Astrophysics Data System (ADS)

Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

2018-02-01

Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

Discovering the Power of Individual-Based Modelling in Teaching and Learning: The Study of a Predator-Prey System

NASA Astrophysics Data System (ADS)

Ginovart, Marta

2014-08-01

The general aim is to promote the use of individual-based models (biological agent-based models) in teaching and learning contexts in life sciences and to make their progressive incorporation into academic curricula easier, complementing other existing modelling strategies more frequently used in the classroom. Modelling activities for the study of a predator-prey system for a mathematics classroom in the first year of an undergraduate program in biosystems engineering have been designed and implemented. These activities were designed to put two modelling approaches side by side, an individual-based model and a set of ordinary differential equations. In order to organize and display this, a system with wolves and sheep in a confined domain was considered and studied. With the teaching material elaborated and a computer to perform the numerical resolutions involved and the corresponding individual-based simulations, the students answered questions and completed exercises to achieve the learning goals set. Students' responses regarding the modelling of biological systems and these two distinct methodologies applied to the study of a predator-prey system were collected via questionnaires, open-ended queries and face-to-face dialogues. Taking into account the positive responses of the students when they were doing these activities, it was clear that using a discrete individual-based model to deal with a predator-prey system jointly with a set of ordinary differential equations enriches the understanding of the modelling process, adds new insights and opens novel perspectives of what can be done with computational models versus other models. The complementary views given by the two modelling approaches were very well assessed by students.

Building Assessment Survey and Evaluation (BASE) Study: Summarized Data - Test Space HVAC Characteristics

EPA Pesticide Factsheets

Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues

Improving Vision-Based Motor Rehabilitation Interactive Systems for Users with Disabilities Using Mirror Feedback

PubMed Central

Martínez-Bueso, Pau; Moyà-Alcover, Biel

2014-01-01

Observation is recommended in motor rehabilitation. For this reason, the aim of this study was to experimentally test the feasibility and benefit of including mirror feedback in vision-based rehabilitation systems: we projected the user on the screen. We conducted a user study by using a previously evaluated system that improved the balance and postural control of adults with cerebral palsy. We used a within-subjects design with the two defined feedback conditions (mirror and no-mirror) with two different groups of users (8 with disabilities and 32 without disabilities) using usability measures (time-to-start (T s) and time-to-complete (T c)). A two-tailed paired samples t-test confirmed that in case of disabilities the mirror feedback facilitated the interaction in vision-based systems for rehabilitation. The measured times were significantly worse in the absence of the user's own visual feedback (T s = 7.09 (P < 0.001) and T c = 4.48 (P < 0.005)). In vision-based interaction systems, the input device is the user's own body; therefore, it makes sense that feedback should be related to the body of the user. In case of disabilities the mirror feedback mechanisms facilitated the interaction in vision-based systems for rehabilitation. Results recommends developers and researchers use this improvement in vision-based motor rehabilitation interactive systems. PMID:25295310

Development of a millimetrically scaled biodiesel transesterification device that relies on droplet-based co-axial fluidics

NASA Astrophysics Data System (ADS)

Yeh, S. I.; Huang, Y. C.; Cheng, C. H.; Cheng, C. M.; Yang, J. T.

2016-07-01

In this study, we investigated a fluidic system that adheres to new concepts of energy production. To improve efficiency, cost, and ease of manufacture, a millimetrically scaled device that employs a droplet-based co-axial fluidic system was devised to complete alkali-catalyzed transesterification for biodiesel production. The large surface-to-volume ratio of the droplet-based system, and the internal circulation induced inside the moving droplets, significantly enhanced the reaction rate of immiscible liquids used here - soybean oil and methanol. This device also decreased the molar ratio between methanol and oil to near the stoichiometric coefficients of a balanced chemical equation, which enhanced the total biodiesel volume produced, and decreased the costs of purification and recovery of excess methanol. In this work, the droplet-based co-axial fluidic system performed better than other methods of continuous-flow production. We achieved an efficiency that is much greater than that of reported systems. This study demonstrated the high potential of droplet-based fluidic chips for energy production. The small energy consumption and low cost of the highly purified biodiesel transesterification system described conforms to the requirements of distributed energy (inexpensive production on a moderate scale) in the world.

Neural network-based systems for handprint OCR applications.

PubMed

Ganis, M D; Wilson, C L; Blue, J L

1998-01-01

Over the last five years or so, neural network (NN)-based approaches have been steadily gaining performance and popularity for a wide range of optical character recognition (OCR) problems, from isolated digit recognition to handprint recognition. We present an NN classification scheme based on an enhanced multilayer perceptron (MLP) and describe an end-to-end system for form-based handprint OCR applications designed by the National Institute of Standards and Technology (NIST) Visual Image Processing Group. The enhancements to the MLP are based on (i) neuron activations functions that reduce the occurrences of singular Jacobians; (ii) successive regularization to constrain the volume of the weight space; and (iii) Boltzmann pruning to constrain the dimension of the weight space. Performance characterization studies of NN systems evaluated at the first OCR systems conference and the NIST form-based handprint recognition system are also summarized.

Study of Fluid Experiment System (FES)/CAST/Holographic Ground System (HGS)

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Cummings, Rick; Jones, Brian

1992-01-01

The use of holographic and schlieren optical techniques for studying the concentration gradients in solidification processes has been used by several investigators over the years. The HGS facility at MSFC has been primary resource in researching this capability. Consequently, scientific personnel have been able to utilize these techniques in both ground based research and in space experiments. An important event in the scientific utilization of the HGS facilities was the TGS Crystal Growth and the casting and solidification technology (CAST) experiments that were flown on the International Microgravity Laboratory (IML) mission in March of this year. The preparation and processing of these space observations are the primary experiments reported in this work. This project provides some ground-based studies to optimize on the holographic techniques used to acquire information about the crystal growth processes flown on IML. Since the ground-based studies will be compared with the space-based experimental results, it is necessary to conduct sufficient ground based studies to best determine how the experiment worked in space. The current capabilities in computer based systems for image processing and numerical computation have certainly assisted in those efforts. As anticipated, this study has certainly shown that these advanced computing capabilities are helpful in the data analysis of such experiments.

Identifying and Validating Requirements of a Mobile-Based Self-Management System for People Living with HIV.

PubMed

Mehraeen, Esmaeil; Safdari, Reza; Seyedalinaghi, Seyed Ahmad; Mohammadzadeh, Niloofar; Arji, Goli

2018-01-01

Due to the widespread use of mobile technology and the low cost of this technology, implementing a mobile-based self-management system can lead to adherence to the medication regimens and promotion of the health of people living with HIV (PLWH). We aimed to identify requirements of a mobile-based self-management system, and validate them from the perspective of infectious diseases specialists. This is a mixed-methods study that carried out in two main phases. In the first phase, we identified requirements of a mobile-based self-management system for PLWH. In the second phase, identified requirements were validated using a researcher made questionnaire. The statistical population was infectious diseases specialists affiliated to Tehran University of Medical Sciences. The collected data were analyzed using SPSS statistical software (version 19), and descriptive statistics. By full-text review of selected studies, we determined requirements of a mobile-based self-management system in four categories: demographic, clinical, strategically and technical capabilities. According to the findings, 6 data elements for demographic category, 11 data elements for clinical category, 10 items for self-management strategies, and 11 features for technical capabilities were selected. Using the identified preferences, it is possible to design and implement a mobile-based self-management system for HIV-positive people. Developing a mobile-based self-management system is expected to progress the skills of self-management PLWH, improve of medication regimen adherence, and facilitate communication with healthcare providers.

Radar-based alert system to operate a sewerage network: relevance and operational effectiveness after several years of use.

PubMed

Faure, D; Payrastre, O; Auchet, P

2005-01-01

Since January 2000, the sewerage network of a very urbanised catchment area in the Greater Nancy Urban Community has been operated according to the alarms generated in real time by a storm alert system using weather radar data. This alert system is based on an automatic identification of intense rain cells in the radar images. This paper presents the characteristics of this alert system and synthesises the main results of two complementary studies realised in 2002 in order to estimate the relevance and the operational effectiveness of the alert system. The first study consisted in an off-line analysis of almost 50,000 intense rain cells detected in four years of historical radar data. The second study was an analysis of the experience feedback after two years of operational use of this alert system. The results of these studies are discussed in function of the initial operational objectives.

Applicability of STEM-RTG and High-Power SRG Power Systems to the Discovery and Scout Mission Capabilities Expansion (DSMCE) Study of ASRG-Based Missions

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Cataldo, Robert L.

2015-01-01

This study looks at the applicability of utilizing the Segmented Thermoelectric Modular Radioisotope Thermoelectric Generator (STEM-RTG) or a high-power radioisotope generator to replace the Advanced Stirling Radioisotope Generator (ASRG), which had been identified as the baseline power system for a number of planetary exploration mission studies. Nine different Discovery-Class missions were examined to determine the applicability of either the STEM-RTG or the high-power SRG power systems in replacing the ASRG. The nine missions covered exploration across the solar system and included orbiting spacecraft, landers and rovers. Based on the evaluation a ranking of the applicability of each alternate power system to the proposed missions was made.

Comparison of conventional rule based flow control with control processes based on fuzzy logic in a combined sewer system.

PubMed

Klepiszewski, K; Schmitt, T G

2002-01-01

While conventional rule based, real time flow control of sewer systems is in common use, control systems based on fuzzy logic have been used only rarely, but successfully. The intention of this study is to compare a conventional rule based control of a combined sewer system with a fuzzy logic control by using hydrodynamic simulation. The objective of both control strategies is to reduce the combined sewer overflow volume by an optimization of the utilized storage capacities of four combined sewer overflow tanks. The control systems affect the outflow of four combined sewer overflow tanks depending on the water levels inside the structures. Both systems use an identical rule base. The developed control systems are tested and optimized for a single storm event which affects heterogeneously hydraulic load conditions and local discharge. Finally the efficiencies of the two different control systems are compared for two more storm events. The results indicate that the conventional rule based control and the fuzzy control similarly reach the objective of the control strategy. In spite of the higher expense to design the fuzzy control system its use provides no advantages in this case.

Evidence-based human resource management: a study of nurse leaders' resource allocation.

PubMed

Fagerström, Lisbeth

2009-05-01

The aims were to illustrate how the RAFAELA system can be used to facilitate evidence-based human resource management. The theoretical framework of the RAFAELA system is based on a holistic view of humankind and a view of leadership founded on human resource management. Nine wards from three central hospitals in Finland participated in the study. The data, stemming from 2006-2007, were taken from the critical indicators (ward-related and nursing intensity information) for national benchmarking used in the RAFAELA system. The data were analysed descriptively. The daily nursing resources per classified patient ratio is a more specific method of measurement than the nurse-to-patient ratio. For four wards, the nursing intensity per nurse surpassed the optimal level 34% to 62.2% of days. Resource allocation was clearly improved in that a better balance between patients' care needs and available nursing resources was maintained. The RAFAELA system provides a rational, systematic and objective foundation for evidence-based human resource management. Data from a systematic use of the RAFAELA system offer objective facts and motives for evidence-based decision making in human resource management, and will therefore enhance the nurse leaders' evidence and scientific based way of working.

[Designing and implementation of a web-based quality monitoring system for plasma glucose measurement in multicenter population study].

PubMed

Liu, Yong; Wang, Limin; Pang, Richard; Mo, Nanxun; Hu, Yan; Deng, Qian; Hu, Zhaohui

2015-05-01

The aim of this paper is to describe the designing and implementation of a web-based plasma glucose measurement quality monitoring system to assess the analytical quality of plasma glucose measurements in multicenter population study and provide evidence for the future studies. In the chronic non-communicable disease and related factor surveillance in China, a web based quality monitoring system for plasma glucose measurement was established to conduct evaluation on plasma glucose monitoring quality and effectiveness in 302 surveillance centers, including quality control data entry, transmission and feedback. The majority of the surveillance centers met the quality requirements and passed the evaluation of reproducibility and precision of plasma glucose measurement, only a few centers required intensive training and re-assessment. In order to ensure the completeness and reliability of plasma glucose measurement in the surveillance centers, the establishment of web-based plasma glucose measurement quality control system can facilitate the identification of the qualified surveillance centers and evaluation of plasma glucose measurement quality in different regions. Communication and training are important in ensuring plasma glucose measurement quality. It is necessary to further improve this web-based plasma glucose measurement quality monitoring system in the future to reduce the method specific plasma glucose measurement bias.

Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walsh, D.B.; Grace, J.D.

1996-12-31

Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, maturemore » source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in {open_quotes}snapshots{close_quotes} by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.« less

Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walsh, D.B.; Grace, J.D.

1996-01-01

Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, maturemore » source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in [open quotes]snapshots[close quotes] by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.« less

Review of the systems biology of the immune system using agent-based models.

PubMed

Shinde, Snehal B; Kurhekar, Manish P

2018-06-01

The immune system is an inherent protection system in vertebrate animals including human beings that exhibit properties such as self-organisation, self-adaptation, learning, and recognition. It interacts with the other allied systems such as the gut and lymph nodes. There is a need for immune system modelling to know about its complex internal mechanism, to understand how it maintains the homoeostasis, and how it interacts with the other systems. There are two types of modelling techniques used for the simulation of features of the immune system: equation-based modelling (EBM) and agent-based modelling. Owing to certain shortcomings of the EBM, agent-based modelling techniques are being widely used. This technique provides various predictions for disease causes and treatments; it also helps in hypothesis verification. This study presents a review of agent-based modelling of the immune system and its interactions with the gut and lymph nodes. The authors also review the modelling of immune system interactions during tuberculosis and cancer. In addition, they also outline the future research directions for the immune system simulation through agent-based techniques such as the effects of stress on the immune system, evolution of the immune system, and identification of the parameters for a healthy immune system.

Multi-faceted informatics system for digitising and streamlining the reablement care model.

PubMed

Bond, Raymond R; Mulvenna, Maurice D; Finlay, Dewar D; Martin, Suzanne

2015-08-01

Reablement is new paradigm to increase independence in the home amongst the ageing population. And it remains a challenge to design an optimal electronic system to streamline and integrate reablement into current healthcare infrastructure. Furthermore, given reablement requires collaboration with a range of organisations (including national healthcare institutions and community/voluntary service providers), such a system needs to be co-created with all stakeholders involved. Thus, the purpose of this study is, (1) to bring together stakeholder groups to elicit a comprehensive set of requirements for a digital reablement system, (2) to utilise emerging technologies to implement a system and a data model based on the requirements gathered and (3) to involve user groups in a usability assessment of the system. In this study we employed a mixed qualitative approach that included a series of stakeholder-involved activities. Collectively, 73 subjects were recruited to participate in an ideation event, a quasi-hackathon and a usability study. The study unveiled stakeholder-led requirements, which resulted in a novel cloud-based system that was created using emerging web technologies. The system is driven by a unique data model and includes interactive features that are necessary for streamlining the reablement care model. In summary, this system allows community based interventions (or services) to be prescribed to occupants whilst also monitoring the occupant's progress of independent living. Copyright © 2015 Elsevier Inc. All rights reserved.

Geospatial data sharing, online spatial analysis and processing of Indian Biodiversity data in Internet GIS domain - A case study for raster based online geo-processing

NASA Astrophysics Data System (ADS)

Karnatak, H.; Pandey, K.; Oberai, K.; Roy, A.; Joshi, D.; Singh, H.; Raju, P. L. N.; Krishna Murthy, Y. V. N.

2014-11-01

National Biodiversity Characterization at Landscape Level, a project jointly sponsored by Department of Biotechnology and Department of Space, was implemented to identify and map the potential biodiversity rich areas in India. This project has generated spatial information at three levels viz. Satellite based primary information (Vegetation Type map, spatial locations of road & village, Fire occurrence); geospatially derived or modelled information (Disturbance Index, Fragmentation, Biological Richness) and geospatially referenced field samples plots. The study provides information of high disturbance and high biological richness areas suggesting future management strategies and formulating action plans. The study has generated for the first time baseline database in India which will be a valuable input towards climate change study in the Indian Subcontinent. The spatial data generated during the study is organized as central data repository in Geo-RDBMS environment using PostgreSQL and POSTGIS. The raster and vector data is published as OGC WMS and WFS standard for development of web base geoinformation system using Service Oriented Architecture (SOA). The WMS and WFS based system allows geo-visualization, online query and map outputs generation based on user request and response. This is a typical mashup architecture based geo-information system which allows access to remote web services like ISRO Bhuvan, Openstreet map, Google map etc., with overlay on Biodiversity data for effective study on Bio-resources. The spatial queries and analysis with vector data is achieved through SQL queries on POSTGIS and WFS-T operations. But the most important challenge is to develop a system for online raster based geo-spatial analysis and processing based on user defined Area of Interest (AOI) for large raster data sets. The map data of this study contains approximately 20 GB of size for each data layer which are five in number. An attempt has been to develop system using python, PostGIS and PHP for raster data analysis over the web for Biodiversity conservation and prioritization. The developed system takes inputs from users as WKT, Openlayer based Polygon geometry and Shape file upload as AOI to perform raster based operation using Python and GDAL/OGR. The intermediate products are stored in temporary files and tables which generate XML outputs for web representation. The raster operations like clip-zip-ship, class wise area statistics, single to multi-layer operations, diagrammatic representation and other geo-statistical analysis are performed. This is indigenous geospatial data processing engine developed using Open system architecture for spatial analysis of Biodiversity data sets in Internet GIS environment. The performance of this applications in multi-user environment like Internet domain is another challenging task which is addressed by fine tuning the source code, server hardening, spatial indexing and running the process in load balance mode. The developed system is hosted in Internet domain (http://bis.iirs.gov.in) for user access.

Continued use of an interactive computer game-based visual perception learning system in children with developmental delay.

PubMed

Lin, Hsien-Cheng; Chiu, Yu-Hsien; Chen, Yenming J; Wuang, Yee-Pay; Chen, Chiu-Ping; Wang, Chih-Chung; Huang, Chien-Ling; Wu, Tang-Meng; Ho, Wen-Hsien

2017-11-01

This study developed an interactive computer game-based visual perception learning system for special education children with developmental delay. To investigate whether perceived interactivity affects continued use of the system, this study developed a theoretical model of the process in which learners decide whether to continue using an interactive computer game-based visual perception learning system. The technology acceptance model, which considers perceived ease of use, perceived usefulness, and perceived playfulness, was extended by integrating perceived interaction (i.e., learner-instructor interaction and learner-system interaction) and then analyzing the effects of these perceptions on satisfaction and continued use. Data were collected from 150 participants (rehabilitation therapists, medical paraprofessionals, and parents of children with developmental delay) recruited from a single medical center in Taiwan. Structural equation modeling and partial-least-squares techniques were used to evaluate relationships within the model. The modeling results indicated that both perceived ease of use and perceived usefulness were positively associated with both learner-instructor interaction and learner-system interaction. However, perceived playfulness only had a positive association with learner-system interaction and not with learner-instructor interaction. Moreover, satisfaction was positively affected by perceived ease of use, perceived usefulness, and perceived playfulness. Thus, satisfaction positively affects continued use of the system. The data obtained by this study can be applied by researchers, designers of computer game-based learning systems, special education workers, and medical professionals. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of System Thinking Skills in the Context of Earth System Education

ERIC Educational Resources Information Center

Assaraf, Orit Ben-Zvi; Orion, Nir

2005-01-01

The current study deals with the development of system thinking skills at the junior high school level. The sample population included about 50 eighth-grade students from two different classes of an urban Israeli junior high school who studied an earth systems-based curriculum that focused on the hydro cycle. The study addressed the following…

Implementation Issues of a Standards-Based Teacher Evaluation System: Perceptions of Campus Administrators

ERIC Educational Resources Information Center

Nixon, Lisa

2013-01-01

The purpose of this mixed methods study was to determine the key implementation issues of a standards-based teacher evaluation system as perceived by campus administrators. The 80 campus administrators that participated in this study were from six public school districts located in southeastern Texas that serve students in grades Kindergarten…

A Location-Based Prompting System to Transition Autonomously through Vocational Tasks for Individuals with Cognitive Impairments

ERIC Educational Resources Information Center

Chang, Yao-Jen; Wang, Tsen-Yung; Chen, Yan-Ru

2011-01-01

This study assessed the possibility of training two individuals with cognitive impairments using location-based task prompting system in a supported employment program. This study was carried out according to an ABAB sequence in which A represented the baseline and B represented intervention phases. Data showed that the two participants…

A Community-Based Research Approach to Develop an Educational Web Portal

ERIC Educational Resources Information Center

Preiser-Houy, Lara; Navarrete, Carlos J.

2011-01-01

Service-learning projects are becoming more prevalent in Information Systems education. This study explores the use of community-based research, a special kind of a service-learning strategy, in an Information Systems web development course. The paper presents a case study of a service-learning project to develop an educational web portal for a…

A Comparison of Exposure Control Procedures in CAT Systems Based on Different Measurement Models for Testlets

ERIC Educational Resources Information Center

Boyd, Aimee M.; Dodd, Barbara; Fitzpatrick, Steven

2013-01-01

This study compared several exposure control procedures for CAT systems based on the three-parameter logistic testlet response theory model (Wang, Bradlow, & Wainer, 2002) and Masters' (1982) partial credit model when applied to a pool consisting entirely of testlets. The exposure control procedures studied were the modified within 0.10 logits…

IDENTIFICATION OF ACTIVE BACTERIAL COMMUNITIES IN A MODEL DRINKING WATER BIOFILM SYSTEM USING 16S RRNA-BASED CLONE LIBRARIES

EPA Science Inventory

Recent phylogenetic studies have used DNA as the target molecule for the development of environmental 16S rDNA clone libraries. As DNA may persist in the environment, DNA-based libraries cannot be used to identify metabolically active bacteria in water systems. In this study, a...

A Mandatory, High-Stakes National Teacher Evaluation System: Perceptions and Attributions of Teachers Who Actively Refuse to Participate

ERIC Educational Resources Information Center

Tornero, Bernardita; Taut, Sandy

2010-01-01

This study examines why some public elementary school teachers openly refuse participation in a mandatory national, standards-based teacher evaluation program. We describe the perceptions these "rebel" teachers have of the evaluation system, studying their open resistance based on the meanings they construct, and elaborated an…

Examining Teacher Evaluation Validity and Leadership Decision Making within a Standards-Based Evaluation System

ERIC Educational Resources Information Center

Kimball, Steven M.; Milanowski, Anthony

2009-01-01

Purpose: The article reports on a study of school leader decision making that examined variation in the validity of teacher evaluation ratings in a school district that has implemented a standards-based teacher evaluation system. Research Methods: Applying mixed methods, the study used teacher evaluation ratings and value-added student achievement…

Web-Based Geographic Information Systems: Experience and Perspectives of Planners and the Implications for Extension

ERIC Educational Resources Information Center

Göçmen, Z. Asligül

2016-01-01

Web-based geographic information system (GIS) technology, or web-based GIS, offers many opportunities for public planners and Extension educators who have limited GIS backgrounds or resources. However, investigation of its use in planning has been limited. The study described here examined the use of web-based GIS by public planning agencies. A…

The Development of a Robot-Based Learning Companion: A User-Centered Design Approach

ERIC Educational Resources Information Center

Hsieh, Yi-Zeng; Su, Mu-Chun; Chen, Sherry Y.; Chen, Gow-Dong

2015-01-01

A computer-vision-based method is widely employed to support the development of a variety of applications. In this vein, this study uses a computer-vision-based method to develop a playful learning system, which is a robot-based learning companion named RobotTell. Unlike existing playful learning systems, a user-centered design (UCD) approach is…

Rocket Based Combined Cycle (RBCC) Propulsion Workshop, volume 2

NASA Technical Reports Server (NTRS)

Chojnacki, Kent T.

1992-01-01

The goal of the Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop, was to impart technology information to the propulsion community with respect to hypersonic combined cycle propulsion capabilities. The major recommendation resulting from this technology workshop was as follows: conduct a systems-level applications study to define the desired propulsion system and vehicle technology requirements for LEO launch vehicles. All SSTO and TSTO options using the various propulsion systems (airbreathing combined cycle, rocket-based combined cycle, and all rocket) must be considered. Such a study should be accomplished as soon as possible. It must be conducted with a consistent set of ground rules and assumptions. Additionally, the study should be conducted before any major expenditures on a RBCC technology development program occur.

Implementing a low-cost web-based clinical trial management system for community studies: a case study.

PubMed

Geyer, John; Myers, Kathleen; Vander Stoep, Ann; McCarty, Carolyn; Palmer, Nancy; DeSalvo, Amy

2011-10-01

Clinical trials with multiple intervention locations and a single research coordinating center can be logistically difficult to implement. Increasingly, web-based systems are used to provide clinical trial support with many commercial, open source, and proprietary systems in use. New web-based tools are available which can be customized without programming expertise to deliver web-based clinical trial management and data collection functions. To demonstrate the feasibility of utilizing low-cost configurable applications to create a customized web-based data collection and study management system for a five intervention site randomized clinical trial establishing the efficacy of providing evidence-based treatment via teleconferencing to children with attention-deficit hyperactivity disorder. The sites are small communities that would not usually be included in traditional randomized trials. A major goal was to develop database that participants could access from computers in their home communities for direct data entry. Discussed is the selection process leading to the identification and utilization of a cost-effective and user-friendly set of tools capable of customization for data collection and study management tasks. An online assessment collection application, template-based web portal creation application, and web-accessible Access 2007 database were selected and customized to provide the following features: schedule appointments, administer and monitor online secure assessments, issue subject incentives, and securely transmit electronic documents between sites. Each tool was configured by users with limited programming expertise. As of June 2011, the system has successfully been used with 125 participants in 5 communities, who have completed 536 sets of assessment questionnaires, 8 community therapists, and 11 research staff at the research coordinating center. Total automation of processes is not possible with the current set of tools as each is loosely affiliated, creating some inefficiency. This system is best suited to investigations with a single data source e.g., psychosocial questionnaires. New web-based applications can be used by investigators with limited programming experience to implement user-friendly, efficient, and cost-effective tools for multi-site clinical trials with small distant communities. Such systems allow the inclusion in research of populations that are not usually involved in clinical trials.

Computer-aided system of evaluation for population-based all-in-one service screening (CASE-PASS): from study design to outcome analysis with bias adjustment.

PubMed

Chen, Li-Sheng; Yen, Amy Ming-Fang; Duffy, Stephen W; Tabar, Laszlo; Lin, Wen-Chou; Chen, Hsiu-Hsi

2010-10-01

Population-based routine service screening has gained popularity following an era of randomized controlled trials. The evaluation of these service screening programs is subject to study design, data availability, and the precise data analysis for adjusting bias. We developed a computer-aided system that allows the evaluation of population-based service screening to unify these aspects and facilitate and guide the program assessor to efficiently perform an evaluation. This system underpins two experimental designs: the posttest-only non-equivalent design and the one-group pretest-posttest design and demonstrates the type of data required at both the population and individual levels. Three major analyses were developed that included a cumulative mortality analysis, survival analysis with lead-time adjustment, and self-selection bias adjustment. We used SAS AF software to develop a graphic interface system with a pull-down menu style. We demonstrate the application of this system with data obtained from a Swedish population-based service screen and a population-based randomized controlled trial for the screening of breast, colorectal, and prostate cancer, and one service screening program for cervical cancer with Pap smears. The system provided automated descriptive results based on the various sources of available data and cumulative mortality curves corresponding to the study designs. The comparison of cumulative survival between clinically and screen-detected cases without a lead-time adjustment are also demonstrated. The intention-to-treat and noncompliance analysis with self-selection bias adjustments are also shown to assess the effectiveness of the population-based service screening program. Model validation was composed of a comparison between our adjusted self-selection bias estimates and the empirical results on effectiveness reported in the literature. We demonstrate a computer-aided system allowing the evaluation of population-based service screening programs with an adjustment for self-selection and lead-time bias. This is achieved by providing a tutorial guide from the study design to the data analysis, with bias adjustment. Copyright © 2010 Elsevier Inc. All rights reserved.

Development of a health care systems curriculum

PubMed Central

Pruitt, Zachary; Mhaskar, Rahul; Kane, Bryan G; Barraco, Robert D; DeWaay, Deborah J; Rosenau, Alex M; Bresnan, Kristin A; Greenberg, Marna Rayl

2017-01-01

Background There is currently no gold standard for delivery of systems-based practice in medical education, and it is challenging to incorporate into medical education. Health systems competence requires physicians to understand patient care within the broader health care system and is vital to improving the quality of care clinicians provide. We describe a health systems curriculum that utilizes problem-based learning across 4 years of systems-based practice medical education at a single institution. Methods This case study describes the application of a problem-based learning approach to system-based practice medical education. A series of behavioral statements, called entrustable professional activities, was created to assess student health system competence. Student evaluation of course curriculum design, delivery, and assessment was provided through web-based surveys. Results To meet competency standards for system-based practice, a health systems curriculum was developed and delivered across 4 years of medical school training. Each of the health system lectures and problem-based learning activities are described herein. The majority of first and second year medical students stated they gained working knowledge of health systems by engaging in these sessions. The majority of the 2016 graduating students (88.24%) felt that the course content, overall, prepared them for their career. Conclusion A health systems curriculum in undergraduate medical education using a problem-based learning approach is feasible. The majority of students learning health systems curriculum through this format reported being prepared to improve individual patient care and optimize the health system’s value (better care and health for lower cost). PMID:29138614

Autonomous aerial observations to extend and complement the Earth Observing System: a science-driven systems-oriented approach

NASA Astrophysics Data System (ADS)

Sandford, Stephen P.; Harrison, F. W.; Langford, John; Johnson, James W.; Qualls, Garry; Emmitt, David; Jones, W. Linwood; Shugart, Herman H., Jr.

2004-12-01

The current Earth observing capability depends primarily on spacecraft missions and ground-based networks to provide the critical on-going observations necessary for improved understanding of the Earth system. Aircraft missions play an important role in process studies but are limited to relatively short-duration flights. Suborbital observations have contributed to global environmental knowledge by providing in-depth, high-resolution observations that space-based and in-situ systems are challenged to provide; however, the limitations of aerial platforms - e.g., limited observing envelope, restrictions associated with crew safety and high cost of operations have restricted the suborbital program to a supporting role. For over a decade, it has been recognized that autonomous aerial observations could potentially be important. Advances in several technologies now enable autonomous aerial observation systems (AAOS) that can provide fundamentally new observational capability for Earth science and applications and thus lead scientists and engineers to rethink how suborbital assets can best contribute to Earth system science. Properly developed and integrated, these technologies will enable new Earth science and operational mission scenarios with long term persistence, higher-spatial and higher-temporal resolution at lower cost than space or ground based approaches. This paper presents the results of a science driven, systems oriented study of broad Earth science measurement needs. These needs identify aerial mission scenarios that complement and extend the current Earth Observing System. These aerial missions are analogous to space missions in their complexity and potential for providing significant data sets for Earth scientists. Mission classes are identified and presented based on science driven measurement needs in atmospheric, ocean and land studies. Also presented is a nominal concept of operations for an AAOS: an innovative set of suborbital assets that complements and augments current and planned space-based observing systems.

Relationship between radiation dose reduction and image quality change in photostimulable phosphor luminescence X-ray imaging systems.

PubMed

Sakurai, T; Kawamata, R; Kozai, Y; Kaku, Y; Nakamura, K; Saito, M; Wakao, H; Kashima, I

2010-05-01

The aim of the study was to clarify the change in image quality upon X-ray dose reduction and to re-analyse the possibility of X-ray dose reduction in photostimulable phosphor luminescence (PSPL) X-ray imaging systems. In addition, the study attempted to verify the usefulness of multiobjective frequency processing (MFP) and flexible noise control (FNC) for X-ray dose reduction. Three PSPL X-ray imaging systems were used in this study. Modulation transfer function (MTF), noise equivalent number of quanta (NEQ) and detective quantum efficiency (DQE) were evaluated to compare the basic physical performance of each system. Subjective visual evaluation of diagnostic ability for normal anatomical structures was performed. The NEQ, DQE and diagnostic ability were evaluated at base X-ray dose, and 1/3, 1/10 and 1/20 of the base X-ray dose. The MTF of the systems did not differ significantly. The NEQ and DQE did not necessarily depend on the pixel size of the system. The images from all three systems had a higher diagnostic utility compared with conventional film images at the base and 1/3 X-ray doses. The subjective image quality was better at the base X-ray dose than at 1/3 of the base dose in all systems. The MFP and FNC-processed images had a higher diagnostic utility than the images without MFP and FNC. The use of PSPL imaging systems may allow a reduction in the X-ray dose to one-third of that required for conventional film. It is suggested that MFP and FNC are useful for radiation dose reduction.

An RFID-Based Manufacturing Control Framework for Loosely Coupled Distributed Manufacturing System Supporting Mass Customization

NASA Astrophysics Data System (ADS)

Chen, Ruey-Shun; Tsai, Yung-Shun; Tu, Arthur

In this study we propose a manufacturing control framework based on radio-frequency identification (RFID) technology and a distributed information system to construct a mass-customization production process in a loosely coupled shop-floor control environment. On the basis of this framework, we developed RFID middleware and an integrated information system for tracking and controlling the manufacturing process flow. A bicycle manufacturer was used to demonstrate the prototype system. The findings of this study were that the proposed framework can improve the visibility and traceability of the manufacturing process as well as enhance process quality control and real-time production pedigree access. Using this framework, an enterprise can easily integrate an RFID-based system into its manufacturing environment to facilitate mass customization and a just-in-time production model.

Program on State Agency Remote Sensing Data Management (SARSDM). [missouri

NASA Technical Reports Server (NTRS)

Eastwood, L. F., Jr.; Gotway, E. O.

1978-01-01

A planning study for developing a Missouri natural resources information system (NRIS) that combines satellite-derived data and other information to assist in carrying out key state tasks was conducted. Four focal applications -- dam safety, ground water supply monitoring, municipal water supply monitoring, and Missouri River basin modeling were identified. Major contributions of the study are: (1) a systematic choice and analysis of a high priority application (water resources) for a Missouri, LANDSAT-based information system; (2) a system design and implementation plan, based on Missouri, but useful for many other states; (3) an analysis of system costs, component and personnel requirements, and scheduling; and (4) an assessment of deterrents to successful technological innovation of this type in state government, and a system management plan, based on this assessment, for overcoming these obstacles in Missouri.

Cost Savings Associated with the Adoption of a Cloud Computing Data Transfer System for Trauma Patients.

PubMed

Feeney, James M; Montgomery, Stephanie C; Wolf, Laura; Jayaraman, Vijay; Twohig, Michael

2016-09-01

Among transferred trauma patients, challenges with the transfer of radiographic studies include problems loading or viewing the studies at the receiving hospitals, and problems manipulating, reconstructing, or evalu- ating the transferred images. Cloud-based image transfer systems may address some ofthese problems. We reviewed the charts of patients trans- ferred during one year surrounding the adoption of a cloud computing data transfer system. We compared the rates of repeat imaging before (precloud) and af- ter (postcloud) the adoption of the cloud-based data transfer system. During the precloud period, 28 out of 100 patients required 90 repeat studies. With the cloud computing transfer system in place, three out of 134 patients required seven repeat films. There was a statistically significant decrease in the proportion of patients requiring repeat films (28% to 2.2%, P < .0001). Based on an annualized volume of 200 trauma patient transfers, the cost savings estimated using three methods of cost analysis, is between $30,272 and $192,453.

Interacting with mobile devices by fusion eye and hand gestures recognition systems based on decision tree approach

NASA Astrophysics Data System (ADS)

Elleuch, Hanene; Wali, Ali; Samet, Anis; Alimi, Adel M.

2017-03-01

Two systems of eyes and hand gestures recognition are used to control mobile devices. Based on a real-time video streaming captured from the device's camera, the first system recognizes the motion of user's eyes and the second one detects the static hand gestures. To avoid any confusion between natural and intentional movements we developed a system to fuse the decision coming from eyes and hands gesture recognition systems. The phase of fusion was based on decision tree approach. We conducted a study on 5 volunteers and the results that our system is robust and competitive.

Causes of mortality in laying hens in different housing systems in 2001 to 2004

PubMed Central

Fossum, Oddvar; Jansson, Désirée S; Etterlin, Pernille Engelsen; Vågsholm, Ivar

2009-01-01

Background The husbandry systems for laying hens were changed in Sweden during the years 2001 – 2004, and an increase in the number of submissions for necropsy from laying hen farms was noted. Hence, this study was initiated to compare causes of mortality in different housing systems for commercial laying hens during this change. Methods Based on results from routine necropsies of 914 laying hens performed at the National Veterinary Institute (SVA) in Uppsala, Sweden between 2001 and 2004, a retrospective study on the occurrence of diseases and cannibalism, i.e., pecking leading to mortality, in different housing systems was carried out. Using the number of disease outbreaks in caged flocks as the baseline, the expected number of flocks with a certain category of disease in the other housing systems was estimated having regard to the total number of birds in the population. Whether the actual number of flocks significantly exceeded the expected number was determined using a Poisson distribution for the variance of the baseline number, a continuity correction and the exact value for the Poisson distribution function in Excel 2000. Results Common causes of mortality in necropsied laying hens included colibacillosis, erysipelas, coccidiosis, red mite infestation, lymphoid leukosis and cannibalism. Less common diagnoses were Newcastle Disease, pasteurellosis and botulism. Considering the size of the populations in the different housing systems, a larger proportion of laying hens than expected was submitted for necropsy from litter-based systems and free range production compared to hens in cages (P < 0.001). The study showed a significantly higher occurrence of bacterial and parasitic diseases and cannibalism in laying hens kept in litter-based housing systems and free-range systems than in hens kept in cages (P < 0.001). The occurrence of viral diseases was significantly higher in indoor litter-based housing systems than in cages (P < 0.001). Conclusion The results of the present study indicated that during 2001–2004 laying hens housed in litter-based housing systems, with or without access to outdoor areas, were at higher risk of infectious diseases and cannibalistic behaviour compared to laying hens in cages. Future research should focus on finding suitable prophylactic measures, including efficient biosecurity routines, to reduce the risk of infectious diseases and cannibalism in litter-based housing systems for laying hens. PMID:19146656

Integrating evidence-based practices for increasing cancer screenings in safety net health systems: a multiple case study using the Consolidated Framework for Implementation Research.

PubMed

Liang, Shuting; Kegler, Michelle C; Cotter, Megan; Emily, Phillips; Beasley, Derrick; Hermstad, April; Morton, Rentonia; Martinez, Jeremy; Riehman, Kara

2016-08-02

Implementing evidence-based practices (EBPs) to increase cancer screenings in safety net primary care systems has great potential for reducing cancer disparities. Yet there is a gap in understanding the factors and mechanisms that influence EBP implementation within these high-priority systems. Guided by the Consolidated Framework for Implementation Research (CFIR), our study aims to fill this gap with a multiple case study of health care safety net systems that were funded by an American Cancer Society (ACS) grants program to increase breast and colorectal cancer screening rates. The initiative funded 68 safety net systems to increase cancer screening through implementation of evidence-based provider and client-oriented strategies. Data are from a mixed-methods evaluation with nine purposively selected safety net systems. Fifty-two interviews were conducted with project leaders, implementers, and ACS staff. Funded safety net systems were categorized into high-, medium-, and low-performing cases based on the level of EBP implementation. Within- and cross-case analyses were performed to identify CFIR constructs that influenced level of EBP implementation. Of 39 CFIR constructs examined, six distinguished levels of implementation. Two constructs were from the intervention characteristics domain: adaptability and trialability. Three were from the inner setting domain: leadership engagement, tension for change, and access to information and knowledge. Engaging formally appointed internal implementation leaders, from the process domain, also distinguished level of implementation. No constructs from the outer setting or individual characteristics domain differentiated systems by level of implementation. Our study identified a number of influential CFIR constructs and illustrated how they impacted EBP implementation across a variety of safety net systems. Findings may inform future dissemination efforts of EBPs for increasing cancer screening in similar settings. Moreover, our analytic approach is similar to previous case studies using CFIR and hence could facilitate comparisons across studies.

Initial solubility & density evaluation of Non-Aqueous system of amino acid salts for CO2 capture: potassium prolinate blended with ethanol and ethylene glycol

NASA Astrophysics Data System (ADS)

Murshid, Ghulam; Garg, Sahil

2018-05-01

Amine scrubbing is the state of the art technology for CO2 capture, and solvent selection can significantly reduce the capital and energy cost of the process. Higher energy requirement for aqueous amine based CO2 removal process is still a most important downside preventive its industrial deployment. Therefore, in this study, novel non-aqueous based amino acid salt system consisting of potassium prolinate, ethanol and ethylene glycol has been studied. This work presents initial CO2 solubility study and important physical properties i.e. density of the studied solvent system. Previous work showed that non-aqueous system of potassium prolinate and ethanol has good absorption rates and requires lower energy for solvent regeneration. However, during regeneration, solvent loss issues were found due to lower boiling point of the ethanol. Therefore, ethylene glycol was added into current studied system for enhancing the overall boiling point of the system. The good initial CO2 solubility and low density of studied solvent system offers several advantages as compared to conventional amine solutions.

Classifications of Acute Scaphoid Fractures: A Systematic Literature Review.

PubMed

Ten Berg, Paul W; Drijkoningen, Tessa; Strackee, Simon D; Buijze, Geert A

2016-05-01

Background In the lack of consensus, surgeon-based preference determines how acute scaphoid fractures are classified. There is a great variety of classification systems with considerable controversies. Purposes The purpose of this study was to provide an overview of the different classification systems, clarifying their subgroups and analyzing their popularity by comparing citation indexes. The intention was to improve data comparison between studies using heterogeneous fracture descriptions. Methods We performed a systematic review of the literature based on a search of medical literature from 1950 to 2015, and a manual search using the reference lists in relevant book chapters. Only original descriptions of classifications of acute scaphoid fractures in adults were included. Popularity was based on citation index as reported in the databases of Web of Science (WoS) and Google Scholar. Articles that were cited <10 times in WoS were excluded. Results Our literature search resulted in 308 potentially eligible descriptive reports of which 12 reports met the inclusion criteria. We distinguished 13 different (sub) classification systems based on (1) fracture location, (2) fracture plane orientation, and (3) fracture stability/displacement. Based on citations numbers, the Herbert classification was most popular, followed by the Russe and Mayo classifications. All classification systems were based on plain radiography. Conclusions Most classification systems were based on fracture location, displacement, or stability. Based on the controversy and limited reliability of current classification systems, suggested research areas for an updated classification include three-dimensional fracture pattern etiology and fracture fragment mobility assessed by dynamic imaging.

A general U-block model-based design procedure for nonlinear polynomial control systems

NASA Astrophysics Data System (ADS)

Zhu, Q. M.; Zhao, D. Y.; Zhang, Jianhua

2016-10-01

The proposition of U-model concept (in terms of 'providing concise and applicable solutions for complex problems') and a corresponding basic U-control design algorithm was originated in the first author's PhD thesis. The term of U-model appeared (not rigorously defined) for the first time in the first author's other journal paper, which established a framework for using linear polynomial control system design approaches to design nonlinear polynomial control systems (in brief, linear polynomial approaches → nonlinear polynomial plants). This paper represents the next milestone work - using linear state-space approaches to design nonlinear polynomial control systems (in brief, linear state-space approaches → nonlinear polynomial plants). The overall aim of the study is to establish a framework, defined as the U-block model, which provides a generic prototype for using linear state-space-based approaches to design the control systems with smooth nonlinear plants/processes described by polynomial models. For analysing the feasibility and effectiveness, sliding mode control design approach is selected as an exemplary case study. Numerical simulation studies provide a user-friendly step-by-step procedure for the readers/users with interest in their ad hoc applications. In formality, this is the first paper to present the U-model-oriented control system design in a formal way and to study the associated properties and theorems. The previous publications, in the main, have been algorithm-based studies and simulation demonstrations. In some sense, this paper can be treated as a landmark for the U-model-based research from intuitive/heuristic stage to rigour/formal/comprehensive studies.

A new computer-based counselling system for the promotion of physical activity in patients with chronic diseases--results from a pilot study.

PubMed

Becker, Annette; Herzberg, Dominikus; Marsden, Nicola; Thomanek, Sabine; Jung, Hartmut; Leonhardt, Corinna

2011-05-01

To develop a computer-based counselling system (CBCS) for the improvement of attitudes towards physical activity in chronically ill patients and to pilot its efficacy and acceptance in primary care. The system is tailored to patients' disease and motivational stage. During a pilot study in five German general practices, patients answered questions before, directly and 6 weeks after using the CBCS. Outcome criteria were attitudes and self-efficacy. Qualitative interviews were performed to identify acceptance indicators. Seventy-nine patients participated (mean age: 64.5 years, 53% males; 38% without previous computer experience). Patients' affective and cognitive attitudes changed significantly, self-efficacy showed only minor changes. Patients mentioned no difficulties in interacting with the CBCS. However, perception of the system's usefulness was inconsistent. Computer-based counselling for physical activity related attitudes in patients with chronic diseases is feasible, but the circumstances of use with respect to the target group and its integration into the management process have to be clarified in future studies. This study adds to the understanding of computer-based counselling in primary health care. Acceptance indicators identified in this study will be validated as part of a questionnaire on technology acceptability in a subsequent study. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Energy harvesting from a DE-based dynamic vibro-impact system

NASA Astrophysics Data System (ADS)

Yurchenko, D.; Val, D. V.; Lai, Z. H.; Gu, G.; Thomson, G.

2017-10-01

Dielectric elastomer (DE) generators may be used in harvesting energy from ambient vibrations. Based on existing research on the mechanical properties of a circular DE membrane, a DE-based dynamic vibro-impact system is proposed in this paper to convert vibrational energy into electrical one. The dimensional, electrical and dynamic parameters of the DE membrane are analysed and then used to numerically estimate the output voltage of the proposed system. The system output performances under harmonic excitation are further discussed. At last, the comparison study has been conducted with an electromagnetic energy harvesting system, served as a ‘shaking’ flashlight.

Magnetorheological fluid based automotive steer-by-wire systems

NASA Astrophysics Data System (ADS)

Ahmadkhanlou, Farzad; Washington, Gregory N.; Bechtel, Stephen E.; Wang, Yingru

2006-03-01

The idea of this paper is to design a Magnetorheological (MR) fluid based damper for steer-by-wire systems to provide sensory feedback to the driver. The advantages of using MR fluids in haptic devices stem from the increase in transparency gained from the lightweight semiactive system and controller implementation. The performance of MR fluid based steer-by wire system depends on MR fluid model and specifications, MR damper geometry, and the control algorithm. All of these factors are addressed in this study. The experimental results show the improvements in steer-by-wire by adding force feedback to the system.

Nuclear reactor power as applied to a space-based radar mission

NASA Technical Reports Server (NTRS)

Jaffe, L.; Fujita, T.; Beatty, R.; Bhandari, P.; Chow, E.; Deininger, W.; Ewell, R.; Grossman, M.; Kia, T.; Nesmith, B.

1988-01-01

The SP-100 Project was established to develop and demonstrate feasibility of a space reactor power system (SRPS) at power levels of 10's of kilowatts to a megawatt. To help determine systems requirements for the SRPS, a mission and spacecraft were examined which utilize this power system for a space-based radar to observe moving objects. Aspects of the mission and spacecraft bearing on the power system were the primary objectives of this study; performance of the radar itself was not within the scope. The study was carried out by the Systems Design Audit Team of the SP-100 Project.

A HO-IRT Based Diagnostic Assessment System with Constructed Response Items

ERIC Educational Resources Information Center

Yang, Chih-Wei; Kuo, Bor-Chen; Liao, Chen-Huei

2011-01-01

The aim of the present study was to develop an on-line assessment system with constructed response items in the context of elementary mathematics curriculum. The system recorded the problem solving process of constructed response items and transfered the process to response codes for further analyses. An inference mechanism based on artificial…

Computer-Based National Information Systems. Technology and Public Policy Issues.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

A general introduction to computer based national information systems, and the context and basis for future studies are provided in this report. Chapter One, the introduction, summarizes computers and information systems and their relation to society, the structure of information policy issues, and public policy issues. Chapter Two describes the…

A Situated Cultural Festival Learning System Based on Motion Sensing

ERIC Educational Resources Information Center

Chang, Yi-Hsing; Lin, Yu-Kai; Fang, Rong-Jyue; Lu, You-Te

2017-01-01

A situated Chinese cultural festival learning system based on motion sensing is developed in this study. The primary design principle is to create a highly interactive learning environment, allowing learners to interact with Kinect through natural gestures in the designed learning situation to achieve efficient learning. The system has the…

Applicability evaluation of Deep Eutectic Solvents-Cellulase system for lignocellulose hydrolysis.

PubMed

Gunny, Ahmad Anas Nagoor; Arbain, Dachyar; Nashef, Enas Muen; Jamal, Parveen

2015-04-01

Deep Eutectic Solvents (DESs) have recently emerged as a new generation of ionic liquids for lignocellulose pretreatment. However, DESs contain salt components which tend to inactivate cellulase in the subsequent saccharification process. To alleviate this problem, it is necessary to evaluate the applicability of the DESs-Cellulase system. This was accomplished in the present study by first studying the stability of cellulase in the presence of selected DESs followed by applicability evaluation based on glucose production, energy consumption and kinetic performance. Results showed that the cellulase was able to retain more than 90% of its original activity in the presence of 10% (v/v) for glycerol based DES (GLY) and ethylene glycol based DES (EG). Furthermore, both DESs system exhibited higher glucose percentage enhancement and lower energy consumption as compared to diluted alkali system. Among the two DESs studied, EG showed comparatively better kinetic performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Arduino-based automation of a DNA extraction system.

PubMed

Kim, Kyung-Won; Lee, Mi-So; Ryu, Mun-Ho; Kim, Jong-Won

2015-01-01

There have been many studies to detect infectious diseases with the molecular genetic method. This study presents an automation process for a DNA extraction system based on microfluidics and magnetic bead, which is part of a portable molecular genetic test system. This DNA extraction system consists of a cartridge with chambers, syringes, four linear stepper actuators, and a rotary stepper actuator. The actuators provide a sequence of steps in the DNA extraction process, such as transporting, mixing, and washing for the gene specimen, magnetic bead, and reagent solutions. The proposed automation system consists of a PC-based host application and an Arduino-based controller. The host application compiles a G code sequence file and interfaces with the controller to execute the compiled sequence. The controller executes stepper motor axis motion, time delay, and input-output manipulation. It drives the stepper motor with an open library, which provides a smooth linear acceleration profile. The controller also provides a homing sequence to establish the motor's reference position, and hard limit checking to prevent any over-travelling. The proposed system was implemented and its functionality was investigated, especially regarding positioning accuracy and velocity profile.

A Strategic Study about Quality Characteristics in e-Health Systems Based on a Systematic Literature Review.

PubMed

Domínguez-Mayo, F J; Escalona, M J; Mejías, M; Aragón, G; García-García, J A; Torres, J; Enríquez, J G

2015-01-01

e-Health Systems quality management is an expensive and hard process that entails performing several tasks such as analysis, evaluation, and quality control. Furthermore, the development of an e-Health System involves great responsibility since people's health and quality of life depend on the system and services offered. The focus of the following study is to identify the gap in Quality Characteristics for e-Health Systems, by detecting not only which are the most studied, but also which are the most used Quality Characteristics these Systems include. A strategic study is driven in this paper by a Systematic Literature Review so as to identify Quality Characteristics in e-Health. Such study makes information and communication technology organizations reflect and act strategically to manage quality in e-Health Systems efficiently and effectively. As a result, this paper proposes the bases of a Quality Model and focuses on a set of Quality Characteristics to enable e-Health Systems quality management. Thus, we can conclude that this paper contributes to implementing knowledge with regard to the mission and view of e-Health (Systems) quality management and helps understand how current researches evaluate quality in e-Health Systems.

A Strategic Study about Quality Characteristics in e-Health Systems Based on a Systematic Literature Review

PubMed Central

Escalona, M. J.; Mejías, M.; Aragón, G.; García-García, J. A.; Torres, J.; Enríquez, J. G.

2015-01-01

e-Health Systems quality management is an expensive and hard process that entails performing several tasks such as analysis, evaluation, and quality control. Furthermore, the development of an e-Health System involves great responsibility since people's health and quality of life depend on the system and services offered. The focus of the following study is to identify the gap in Quality Characteristics for e-Health Systems, by detecting not only which are the most studied, but also which are the most used Quality Characteristics these Systems include. A strategic study is driven in this paper by a Systematic Literature Review so as to identify Quality Characteristics in e-Health. Such study makes information and communication technology organizations reflect and act strategically to manage quality in e-Health Systems efficiently and effectively. As a result, this paper proposes the bases of a Quality Model and focuses on a set of Quality Characteristics to enable e-Health Systems quality management. Thus, we can conclude that this paper contributes to implementing knowledge with regard to the mission and view of e-Health (Systems) quality management and helps understand how current researches evaluate quality in e-Health Systems. PMID:26146656

A Simulation Study Comparing Incineration and Composting in a Mars-Based Advanced Life Support System

NASA Technical Reports Server (NTRS)

Hogan, John; Kang, Sukwon; Cavazzoni, Jim; Levri, Julie; Finn, Cory; Luna, Bernadette (Technical Monitor)

2000-01-01

The objective of this study is to compare incineration and composting in a Mars-based advanced life support (ALS) system. The variables explored include waste pre-processing requirements, reactor sizing and buffer capacities. The study incorporates detailed mathematical models of biomass production and waste processing into an existing dynamic ALS system model. The ALS system and incineration models (written in MATLAB/SIMULINK(c)) were developed at the NASA Ames Research Center. The composting process is modeled using first order kinetics, with different degradation rates for individual waste components (carbohydrates, proteins, fats, cellulose and lignin). The biomass waste streams are generated using modified "Eneray Cascade" crop models, which use light- and dark-cycle temperatures, irradiance, photoperiod, [CO2], planting density, and relative humidity as model inputs. The study also includes an evaluation of equivalent system mass (ESM).

Neuman systems model-based research: an integrative review project.

PubMed

Fawcett, J; Giangrande, S K

2001-07-01

The project integrated Neuman systems model-based research literature. Two hundred published studies were located. This article is limited to the 59 full journal articles and 3 book chapters identified. A total of 37% focused on prevention interventions; 21% on perception of stressors; and 10% on stressor reactions. Only 50% of the reports explicitly linked the model with the study variables, and 61% did not include conclusions regarding model utility or credibility. No programs of research were identified. Academic courses and continuing education workshops are needed to help researchers design programs of Neuman systems model-based research and better explicate linkages between the model and the research.

Churn-Resilient Replication Strategy for Peer-to-Peer Distributed Hash-Tables

NASA Astrophysics Data System (ADS)

Legtchenko, Sergey; Monnet, Sébastien; Sens, Pierre; Muller, Gilles

DHT-based P2P systems provide a fault-tolerant and scalable mean to store data blocks in a fully distributed way. Unfortunately, recent studies have shown that if connection/disconnection frequency is too high, data blocks may be lost. This is true for most current DHT-based system's implementations. To avoid this problem, it is necessary to build really efficient replication and maintenance mechanisms. In this paper, we study the effect of churn on an existing DHT-based P2P system such as DHash or PAST. We then propose solutions to enhance churn tolerance and evaluate them through discrete event simulations.

Closed cycle electric discharge laser design investigation

NASA Technical Reports Server (NTRS)

Baily, P. K.; Smith, R. C.

1978-01-01

Closed cycle CO2 and CO electric discharge lasers were studied. An analytical investigation assessed scale-up parameters and design features for CO2, closed cycle, continuous wave, unstable resonator, electric discharge lasing systems operating in space and airborne environments. A space based CO system was also examined. The program objectives were the conceptual designs of six CO2 systems and one CO system. Three airborne CO2 designs, with one, five, and ten megawatt outputs, were produced. These designs were based upon five minute run times. Three space based CO2 designs, with the same output levels, were also produced, but based upon one year run times. In addition, a conceptual design for a one megawatt space based CO laser system was also produced. These designs include the flow loop, compressor, and heat exchanger, as well as the laser cavity itself. The designs resulted in a laser loop weight for the space based five megawatt system that is within the space shuttle capacity. For the one megawatt systems, the estimated weight of the entire system including laser loop, solar power generator, and heat radiator is less than the shuttle capacity.

Model-based verification and validation of the SMAP uplink processes

NASA Astrophysics Data System (ADS)

Khan, M. O.; Dubos, G. F.; Tirona, J.; Standley, S.

Model-Based Systems Engineering (MBSE) is being used increasingly within the spacecraft design community because of its benefits when compared to document-based approaches. As the complexity of projects expands dramatically with continually increasing computational power and technology infusion, the time and effort needed for verification and validation (V& V) increases geometrically. Using simulation to perform design validation with system-level models earlier in the life cycle stands to bridge the gap between design of the system (based on system-level requirements) and verifying those requirements/validating the system as a whole. This case study stands as an example of how a project can validate a system-level design earlier in the project life cycle than traditional V& V processes by using simulation on a system model. Specifically, this paper describes how simulation was added to a system model of the Soil Moisture Active-Passive (SMAP) mission's uplink process. Also discussed are the advantages and disadvantages of the methods employed and the lessons learned; which are intended to benefit future model-based and simulation-based development efforts.

Issues in assessing multi-institutional performance of BI-RADS-based CAD systems

NASA Astrophysics Data System (ADS)

Markey, Mia K.; Lo, Joseph Y.

2005-04-01

The purpose of this study was to investigate factors that impact the generalization of breast cancer computer-aided diagnosis (CAD) systems that utilize the Breast Imaging Reporting and Data System (BI-RADS). Data sets from four institutions were analyzed: Duke University Medical Center, University of Pennsylvania Medical Center, Massachusetts General Hospital, and Wake Forest University. The latter two data sets are subsets of the Digital Database for Screening Mammography. Each data set consisted of descriptions of mammographic lesions according to the BI-RADS lexicon, patient age, and pathology status (benign/malignant). Models were developed to predict pathology status from the BI-RADS descriptors and the patient age. Comparisons between the models built on data from the different institutions were made in terms of empirical (non-parametric) receiver operating characteristic (ROC) curves. Results suggest that BI-RADS-based CAD systems focused on specific classes of lesions may be more generally applicable than models that cover several lesion types. However, better generalization was seen in terms of the area under the ROC curve than in the partial area index (>90% sensitivity). Previous studies have illustrated the challenges in translating a BI-RADS-based CAD system from one institution to another. This study provides new insights into possible approaches to improve the generalization of BI-RADS-based CAD systems.

Application of SAE ARP4754A to Flight Critical Systems

NASA Technical Reports Server (NTRS)

Peterson, Eric M.

2015-01-01

This report documents applications of ARP4754A to the development of modern computer-based (i.e., digital electronics, software and network-based) aircraft systems. This study is to offer insight and provide educational value relative to the guidelines in ARP4754A and provide an assessment of the current state-of-the- practice within industry and regulatory bodies relative to development assurance for complex and safety-critical computer-based aircraft systems.

A ground based phase control system for the solar power satellite, volume 4

NASA Technical Reports Server (NTRS)

Chie, C. M.

1980-01-01

A ground phase control system is studied as an alternative approach to the current reference retrodirective phase control system in order to simplify the spaceborne hardware requirement. Based on waveform selections, functional subsystems to implement the ground-based phase control concept are identified and functionally represented. It was concluded that the feasibility of the concept becomes unclear if the conditions of the ionosphere and satellite motion are not met.

Research and design of logistical information system based on SOA

NASA Astrophysics Data System (ADS)

Zhang, Bo

2013-03-01

Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

Single-camera visual odometry to track a surgical X-ray C-arm base.

PubMed

Esfandiari, Hooman; Lichti, Derek; Anglin, Carolyn

2017-12-01

This study provides a framework for a single-camera odometry system for localizing a surgical C-arm base. An application-specific monocular visual odometry system (a downward-looking consumer-grade camera rigidly attached to the C-arm base) is proposed in this research. The cumulative dead-reckoning estimation of the base is extracted based on frame-to-frame homography estimation. Optical-flow results are utilized to feed the odometry. Online positional and orientation parameters are then reported. Positional accuracy of better than 2% (of the total traveled distance) for most of the cases and 4% for all the cases studied and angular accuracy of better than 2% (of absolute cumulative changes in orientation) were achieved with this method. This study provides a robust and accurate tracking framework that not only can be integrated with the current C-arm joint-tracking system (i.e. TC-arm) but also is capable of being employed for similar applications in other fields (e.g. robotics).

Integration of supercapacitive storage in renewable energy system to compare the response of two level and five level inverter with RL type load

NASA Astrophysics Data System (ADS)

Jana, Suman; Biswas, Pabitra Kumar; Das, Upama

2018-04-01

The analytical and simulation-based study in this presented paper shows a comparative report between two level inverter and five-level inverter with the integration of Supercapacitive storage in Renewable Energy system. Sometime dependent numerical models are used to measure the voltage and current response of two level and five level inverter in MATLAB Simulink based environment. In this study supercapacitive sources, which are fed by solar cells are used as input sources to experiment the response of multilevel inverter with integration of su-percapacitor as a storage device of Renewable Energy System. The RL load is used to compute the time response in MATLABSimulink based environment. With the simulation results a comparative study has been made of two different level types of inverters. Two basic types of inverter are discussed in the study with reference to their electrical behavior. It is also simulated that multilevel inverter can convert stored energy within supercapacitor which is extracted from Renewable Energy System.

Management Information Systems for Faculty Allocations in Institutions of Higher Education: A Case Study for the Universidad de Santiago de Chile.

ERIC Educational Resources Information Center

Karadima, Oscar

The transformation of the present manual system of data manipulation at the Universidad de Santiago de Chile into a computer-based information system capable of supporting decision making is proposed. The information system would be used to determine the number of faculty required by each academic department, based on the number of weekly hours…

Development and Evaluation of Mechatronics Learning System in a Web-Based Environment

ERIC Educational Resources Information Center

Shyr, Wen-Jye

2011-01-01

The development of remote laboratory suitable for the reinforcement of undergraduate level teaching of mechatronics is important. For the reason, a Web-based mechatronics learning system, called the RECOLAB (REmote COntrol LABoratory), for remote learning in engineering education has been developed in this study. The web-based environment is an…

Effectiveness of Feedback for Enhancing English Pronunciation in an ASR-Based CALL System

ERIC Educational Resources Information Center

Wang, Y.-H.; Young, S. S.-C.

2015-01-01

This paper presents a study on implementing the ASR-based CALL (computer-assisted language learning based upon automatic speech recognition) system embedded with both formative and summative feedback approaches and using implicit and explicit strategies to enhance adult and young learners' English pronunciation. Two groups of learners including 18…

Health Education and Symptom Flare Management Using a Video-Based m-Health System for Caring Women with IC/BPS.

PubMed

Lee, Ming-Huei; Wu, Huei-Ching; Tseng, Chien-Ming; Ko, Tsung-Liang; Weng, Tang-Jun; Chen, Yung-Fu

2018-06-10

To assess effectiveness of the video-based m-health system providing videos dictated by physicians for health education and symptom self-management for patients with IC/BPS. An m-health system was designed to provide videos for weekly health education and symptom flare self-management. O'Leary-Sant index and VAS scale as well as SF-36 health survey were administrated to evaluate the disease severity and quality of life (QoL), respectively. A total of 60 IC/BPS patients were recruited and randomly assigned to either control group (30 patients) or study group (30 patients) in sequence depending on their orders to visit our urological clinic. Patients in both control and study groups received regular treatments, while those in the study group received additional video-based intervention. Statistical analyses were conducted to compare the outcomes between baseline and post-intervention for both groups. The outcomes of video-based intervention were also compared with the text-based intervention conducted in our previous study. After video-based intervention, patients in the study group exhibited significant effect manifested in all disease severity and QoL assessments except the VAS pain scale, while no significance was found in the control group. Moreover, the study group exhibited more significant net improvements than the control group in 7 SF-36 constructs, except the mental health. The limitations include short intervention duration (8 weeks) and different study periods between text-based and video-based interventions. Video-based intervention is effective in improving the QoL of IC/BPS patients and outperforms the text-based intervention even in a short period of intervention. Copyright © 2018. Published by Elsevier Inc.

Conceptual analysis of a lunar base transportation system

NASA Technical Reports Server (NTRS)

Hoy, Trevor D.; Johnson, Lloyd B., III; Persons, Mark B.; Wright, Robert L.

1992-01-01

Important to the planning for a lunar base is the development of transportation requirements for the establishment and maintenance of that base. This was accomplished as part of a lunar base systems assessment study conducted by the NASA Langley Research Center in conjunction with the NASA Johnson Space Center. Lunar base parameters are presented using a baseline lunar facility concept and timeline of developmental phases. Masses for habitation and scientific modules, power systems, life support systems, and thermal control systems were generated, assuming space station technology as a starting point. The masses were manifested by grouping various systems into cargo missions and interspersing manned flights consistent with construction and base maintenance timelines. A computer program that sizes the orbital transfer vehicles (OTV's), lunar landers, lunar ascenders, and the manned capsules was developed. This program consists of an interative technique to solve the rocket equation successively for each velocity correction (delta V) in a mission. The delta V values reflect integrated trajectory values and include gravity losses. As the program computed fuel masses, it matched structural masses from General Dynamics' modular space-based OTV design. Variables in the study included the operation mode (i.e., expendable vs. reusable and single-stage vs. two-stage OTV's), cryogenic specific impulse, reflecting different levels of engine technology, and aerobraking vs. all-propulsive return to Earth orbit. The use of lunar-derived oxygen was also examined for its general impact. For each combination of factors, the low-Earth orbit (LEO) stack masses and Earth-to-orbit (ETO) lift requirements are summarized by individual mission and totaled for the developmental phase. In addition to these discrete data, trends in the variation of study parameters are presented.

Network Capacity Assessment of CHP-based Distributed Generation on Urban Energy Distribution Networks

NASA Astrophysics Data System (ADS)

Zhang, Xianjun

The combined heat and power (CHP)-based distributed generation (DG) or dis-tributed energy resources (DERs) are mature options available in the present energy market, considered to be an effective solution to promote energy efficiency. In the urban environment, the electricity, water and natural gas distribution networks are becoming increasingly interconnected with the growing penetration of the CHP-based DG. Subsequently, this emerging interdependence leads to new topics meriting serious consideration: how much of the CHP-based DG can be accommodated and where to locate these DERs, and given preexisting constraints, how to quantify the mutual impacts on operation performances between these urban energy distribution networks and the CHP-based DG. The early research work was conducted to investigate the feasibility and design methods for one residential microgrid system based on existing electricity, water and gas infrastructures of a residential community, mainly focusing on the economic planning. However, this proposed design method cannot determine the optimal DG sizing and siting for a larger test bed with the given information of energy infrastructures. In this context, a more systematic as well as generalized approach should be developed to solve these problems. In the later study, the model architecture that integrates urban electricity, water and gas distribution networks, and the CHP-based DG system was developed. The proposed approach addressed the challenge of identifying the optimal sizing and siting of the CHP-based DG on these urban energy networks and the mutual impacts on operation performances were also quantified. For this study, the overall objective is to maximize the electrical output and recovered thermal output of the CHP-based DG units. The electricity, gas, and water system models were developed individually and coupled by the developed CHP-based DG system model. The resultant integrated system model is used to constrain the DG's electrical output and recovered thermal output, which are affected by multiple factors and thus analyzed in different case studies. The results indicate that the designed typical gas system is capable of supplying sufficient natural gas for the DG normal operation, while the present water system cannot support the complete recovery of the exhaust heat from the DG units.

A Measurement and Power Line Communication System Design for Renewable Smart Grids

NASA Astrophysics Data System (ADS)

Kabalci, E.; Kabalci, Y.

2013-10-01

The data communication over the electric power lines can be managed easily and economically since the grid connections are already spread around all over the world. This paper investigates the applicability of Power Line Communication (PLC) in an energy generation system that is based on photovoltaic (PV) panels with the modeling study in Matlab/Simulink. The Simulink model covers the designed PV panels, boost converter with Perturb and Observe (P&O) control algorithm, full bridge inverter, and the binary phase shift keying (BPSK) modem that is utilized to transfer the measured data over the power lines. This study proposes a novel method to use the electrical power lines not only for carrying the line voltage but also to transmit the measurements of the renewable energy generation plants. Hence, it is aimed at minimizing the additional monitoring costs such as SCADA, Ethernet-based or GSM based systems by using the proposed technique. Although this study is performed with solar power plants, the proposed model can be applied to other renewable generation systems. Consequently, the usage of the proposed technique instead of SCADA or Ethernet-based systems eliminates additional monitoring costs.

Comparison of methods of alert acknowledgement by critical care clinicians in the ICU setting

PubMed Central

Harrison, Andrew M.; Thongprayoon, Charat; Aakre, Christopher A.; Jeng, Jack Y.; Dziadzko, Mikhail A.; Gajic, Ognjen; Pickering, Brian W.

2017-01-01

Background Electronic Health Record (EHR)-based sepsis alert systems have failed to demonstrate improvements in clinically meaningful endpoints. However, the effect of implementation barriers on the success of new sepsis alert systems is rarely explored. Objective To test the hypothesis time to severe sepsis alert acknowledgement by critical care clinicians in the ICU setting would be reduced using an EHR-based alert acknowledgement system compared to a text paging-based system. Study Design In one arm of this simulation study, real alerts for patients in the medical ICU were delivered to critical care clinicians through the EHR. In the other arm, simulated alerts were delivered through text paging. The primary outcome was time to alert acknowledgement. The secondary outcomes were a structured, mixed quantitative/qualitative survey and informal group interview. Results The alert acknowledgement rate from the severe sepsis alert system was 3% (N = 148) and 51% (N = 156) from simulated severe sepsis alerts through traditional text paging. Time to alert acknowledgement from the severe sepsis alert system was median 274 min (N = 5) and median 2 min (N = 80) from text paging. The response rate from the EHR-based alert system was insufficient to compare primary measures. However, secondary measures revealed important barriers. Conclusion Alert fatigue, interruption, human error, and information overload are barriers to alert and simulation studies in the ICU setting. PMID:28316887

A simulation-based study on different control strategies for variable speed pump in distributed ground source heat pump systems

DOE PAGES

Liu, Xiaobing; Zheng, O'Neill; Niu, Fuxin

2016-01-01

Most commercial ground source heat pump systems (GSHP) in the United States are in a distributed configuration. These systems circulate water or an anti-freeze solution through multiple heat pump units via a central pumping system, which usually uses variable speed pump(s). Variable speed pumps have potential to significantly reduce pumping energy use; however, the energy savings in reality could be far away from its potential due to improper pumping system design and controls. In this paper, a simplified hydronic pumping system was simulated with the dynamic Modelica models to evaluate three different pumping control strategies. This includes two conventional controlmore » strategies, which are to maintain a constant differential pressure across either the supply and return mains, or at the most hydraulically remote heat pump; and an innovative control strategy, which adjusts system flow rate based on the demand of each heat pump. The simulation results indicate that a significant overflow occurs at part load conditions when the variable speed pump is controlled to main a constant differential pressure across the supply and return mains of the piping system. On the other hand, an underflow occurs at part load conditions when the variable speed pump is controlled to maintain a constant differential pressure across the furthest heat pump. The flow-demand-based control can provide needed flow rate to each heat pump at any given time, and with less pumping energy use than the two conventional controls. Finally, a typical distributed GSHP system was studied to evaluate the energy saving potential of applying the flow-demand-based pumping control strategy. This case study shows that the annual pumping energy consumption can be reduced by 62% using the flow-demand-based control compared with that using the conventional pressure-based control to maintain a constant differential pressure a cross the supply and return mains.« less

Urban photogrammetric data base for multi-purpose cadastral-based information systems: the Riyadh city case

NASA Astrophysics Data System (ADS)

Al-garni, Abdullah M.

Urban information systems are economic resources that can benefit decision makers in the planning, development, and management of urban projects and resources. In this research, a conceptual model-based prototype Urban Geographic Information System (UGIS) is developed. The base maps used in developing the system and acquiring visual attributes are obtained from aerial photographs. The system is a multi-purpose parcel-based one that can serve many urban applications such as public utilities, health centres, schools, population estimation, road engineering and maintenance, and many others. A modern region in the capital city of Saudi Arabia is used for the study. The developed model is operational for one urban application (population estimation) and is tested for that particular application. The results showed that the system has a satisfactory accuracy and that it may well be promising for other similar urban applications in countries with similar demographic and social characteristics.

Data base management study

NASA Technical Reports Server (NTRS)

1976-01-01

Data base management techniques and applicable equipment are described. Recommendations which will assist potential NASA data users in selecting and using appropriate data base management tools and techniques are presented. Classes of currently available data processing equipment ranging from basic terminals to large minicomputer systems were surveyed as they apply to the needs of potential SEASAT data users. Cost and capabilities projections for this equipment through 1985 were presented. A test of a typical data base management system was described, as well as the results of this test and recommendations to assist potential users in determining when such a system is appropriate for their needs. The representative system tested was UNIVAC's DMS 1100.

Feasibility testing of a web-based symptom self-management system for persons living with HIV.

PubMed

Schnall, Rebecca; Wantland, Dean; Velez, Olivia; Cato, Kenrick; Jia, Haomiao

2014-01-01

The purpose of this study was to explore the feasibility of using a Web-based tool to provide tailored symptom management strategies for persons living with HIV (PLWH) and to estimate the effect size of the tool for future studies. Testing the components of the Web-based system was done by incorporating a repeated-measures design measuring the outcomes of symptom frequency and intensity, use of symptom management strategies, and engagement with health care providers. We recruited 42 PLWH; participants were enrolled in the study for 12 weeks and were asked to use the system and complete the questionnaires every 2 weeks. Our results showed that participants who used the strategies were more likely to have a decrease in symptom frequency and intensity. Findings from this feasibility study provide preliminary evidence for the use of a Web-based HIV symptom management tool with self-management strategies for individuals living with HIV infection. Copyright © 2014 Association of Nurses in AIDS Care. Published by Elsevier Inc. All rights reserved.

A Discussion of Knowledge Based Design

NASA Technical Reports Server (NTRS)

Wood, Richard M.; Bauer, Steven X. S.

1999-01-01

A discussion of knowledge and Knowledge- Based design as related to the design of aircraft is presented. The paper discusses the perceived problem with existing design studies and introduces the concepts of design and knowledge for a Knowledge- Based design system. A review of several Knowledge-Based design activities is provided. A Virtual Reality, Knowledge-Based system is proposed and reviewed. The feasibility of Virtual Reality to improve the efficiency and effectiveness of aerodynamic and multidisciplinary design, evaluation, and analysis of aircraft through the coupling of virtual reality technology and a Knowledge-Based design system is also reviewed. The final section of the paper discusses future directions for design and the role of Knowledge-Based design.

Manned space flight nuclear system safety. Volume 5: Nuclear System safety guidelines. Part 1: Space base nuclear safety

NASA Technical Reports Server (NTRS)

1972-01-01

The design and operations guidelines and requirements developed in the study of space base nuclear system safety are presented. Guidelines and requirements are presented for the space base subsystems, nuclear hardware (reactor, isotope sources, dynamic generator equipment), experiments, interfacing vehicles, ground support systems, range safety and facilities. Cross indices and references are provided which relate guidelines to each other, and to substantiating data in other volumes. The guidelines are intended for the implementation of nuclear safety related design and operational considerations in future space programs.

Research on SaaS and Web Service Based Order Tracking

NASA Astrophysics Data System (ADS)

Jiang, Jianhua; Sheng, Buyun; Gong, Lixiong; Yang, Mingzhong

To solve the order tracking of across enterprises in Dynamic Virtual Enterprise (DVE), a SaaS and web service based order tracking solution was designed by analyzing the order management process in DVE. To achieve the system, the SaaS based architecture of data management on order tasks manufacturing states was constructed, and the encapsulation method of transforming application system into web service was researched. Then the process of order tracking in the system was given out. Finally, the feasibility of this study was verified by the development of a prototype system.

Joint Radioisotope Electric Propulsion Studies - Neptune System Explorer

NASA Technical Reports Server (NTRS)

Khan, M. Omair; Amini, Rashied; Ervin, Joan; Lang, Jared; Landau, Damon; Oleson, Steven; Spilker, Thomas; Strange, Nathan

2011-01-01

The Neptune System Explorer (NSE) mission concept study assessed opportunities to conduct Cassini-like science at Neptune with a radioisotope electric propulsion (REP) based spacecraft. REP is based on powering an electric propulsion (EP) engine with a radioisotope power source (RPS). The NSE study was commissioned under the Joint Radioisotope Electric Propulsion Studies (JREPS) project, which sought to determine the technical feasibility of flagship class REP applications. Within JREPS, special emphasis was given toward identifying tall technology tent poles, as well as recommending any new RPS technology developments that would be required for complicated REP missions. Based on the goals of JREPS, multiple RPS (e.g. thermoelectric and Stirling based RPS) and EP (e.g. Hall and ion engines) technology combinations were traded during the NSE study to determine the most favorable REP design architecture. Among the findings from the study was the need for >400We RPS systems, which was driven by EP operating powers and the requirement for a long-lived mission in the deep solar system. Additionally multiple development and implementation risks were identified for the NSE concept, as well as REP missions in general. Among the strengths of the NSE mission would be the benefits associated with RPS and EP use, such as long-term power (approx. 2-3kW) at Neptune and flexible trajectory options for achieving orbit or tours of the Neptune system. Although there are still multiple issues to mitigate, the NSE concept demonstrated distinct advantages associated with using REP for deep space flagship-class missions.

Highway Air Pollution Dispersion Modeling : Preliminary Evaluation of Thirteen Models

DOT National Transportation Integrated Search

1978-06-01

Thirteen highway air pollution dispersion models have been tested, using a portion of the Airedale air quality data base. The Transportation Air Pollution Studies (TAPS) System, a data base management system specifically designed for evaluating dispe...

Highway Air Pollution Dispersion Modeling : Preliminary Evaluation of Thirteen Models

DOT National Transportation Integrated Search

1977-01-01

Thirteen highway air pollution dispersion models have been tested, using a portion of the Airedale air quality data base. The Transportation Air Pollution Studies (TAPS) System, a data base management system specifically designed for evaluating dispe...

Peristaltic pump-based low range pressure sensor calibration system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vinayakumar, K. B.; Department of Electronic Systems Engineering, Indian Institute of Science, Bangalore 5600012; Naveen Kumar, G.

2015-11-15

Peristaltic pumps were normally used to pump liquids in several chemical and biological applications. In the present study, a peristaltic pump was used to pressurize the chamber (positive as well negative pressures) using atmospheric air. In the present paper, we discuss the development and performance study of an automatic pressurization system to calibrate low range (millibar) pressure sensors. The system includes a peristaltic pump, calibrated pressure sensor (master sensor), pressure chamber, and the control electronics. An in-house developed peristaltic pump was used to pressurize the chamber. A closed loop control system has been developed to detect and adjust the pressuremore » leaks in the chamber. The complete system has been integrated into a portable product. The system performance has been studied for a step response and steady state errors. The system is portable, free from oil contaminants, and consumes less power compared to existing pressure calibration systems. The veracity of the system was verified by calibrating an unknown diaphragm based pressure sensor and the results obtained were satisfactory.« less

Peristaltic pump-based low range pressure sensor calibration system

NASA Astrophysics Data System (ADS)

Vinayakumar, K. B.; Naveen Kumar, G.; Nayak, M. M.; Dinesh, N. S.; Rajanna, K.

2015-11-01

Peristaltic pumps were normally used to pump liquids in several chemical and biological applications. In the present study, a peristaltic pump was used to pressurize the chamber (positive as well negative pressures) using atmospheric air. In the present paper, we discuss the development and performance study of an automatic pressurization system to calibrate low range (millibar) pressure sensors. The system includes a peristaltic pump, calibrated pressure sensor (master sensor), pressure chamber, and the control electronics. An in-house developed peristaltic pump was used to pressurize the chamber. A closed loop control system has been developed to detect and adjust the pressure leaks in the chamber. The complete system has been integrated into a portable product. The system performance has been studied for a step response and steady state errors. The system is portable, free from oil contaminants, and consumes less power compared to existing pressure calibration systems. The veracity of the system was verified by calibrating an unknown diaphragm based pressure sensor and the results obtained were satisfactory.

Application of a minicomputer-based system in measuring intraocular fluid dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bronzino, J.D.; D'Amato, D.P.; O'Rourke, J.

A complete, computerized system has been developed to automate and display radionuclide clearance studies in an ophthalmology clinical laboratory. The system is based on a PDP-8E computer with a 16-k core memory and includes a dual-drive Decassette system and an interactive display terminal. The software controls the acquisition of data from an NIM scaler, times the procedures, and analyzes and simultaneously displays logarithmically converted data on a fully annotated graph. Animal studies and clinical experiments are presented to illustrate the nature of these displays and the results obtained using this automated eye physiometer.

Space shuttle food system study. Volume 1: System design report

NASA Technical Reports Server (NTRS)

1974-01-01

Data were assembled which define the optimum food system to support the space shuttle program, and which provide sufficient engineering data to support necessary requests for proposals towards final development and installment of the system. The study approach used is outlined, along with technical data and sketches for each functional area. Logistic support analysis, system assurance, and recommendations and conclusions based on the study results are also presented.

IS Success Model in E-Learning Context Based on Students' Perceptions

ERIC Educational Resources Information Center

Freeze, Ronald D.; Alshare, Khaled A.; Lane, Peggy L.; Wen, H. Joseph

2010-01-01

This study utilized the Information Systems Success (ISS) model in examining e-learning systems success. The study was built on the premise that system quality (SQ) and information quality (IQ) influence system use and user satisfaction, which in turn impact system success. A structural equation model (SEM), using LISREL, was used to test the…

Orbital transfer vehicle concept definition and system analysis study. Volume 1A: Executive summary. Phase 2

NASA Technical Reports Server (NTRS)

Ketchum, W. J.

1986-01-01

The objectives of the Phase 2 study were to improve the orbit transfer vehicle (OTV) concept definition by focusing on the following issues: the impact of mission requirements on OTV system design; OTV basing concepts on the Space Shuttle, separate platforms, and/or remote locations; cost reduction of an OTV program to improve its economic benefits and support its acquisition. The OTV mission scenario includes a wide range of missions the main drivers of which are manned GEO servicing, mid-inclination/polar DOD, and lunar/planetary projects. A mission model is presented which includes the type and number of missions per year and the estimated propellant requirements. To accomplish the missions, many OTV concepts were defined including ground-based OTVs launched either in the STS orbiter, the aft cargo carrier, or a heavy lift launch vehicle, and a space-based OTV. System and program trade studies were conducted using performance, cost, safety/risk, and operations/growth criteria. The study shows that mission requirements and substantial economic benefits justify a reusable, cryogenic (H2/O2) space-based OTV. Such a system would not be subjected to Earth-to-orbit launch loads and would not be constained in size or weight. Safety is enhanced by the fact that the system components are launched unfueled. Its inherent reusability and ability to be refueled in space make the space-based OTV very economical to operate.

Novel microemulsion-based gels for topical delivery of indomethacin: Formulation, physicochemical properties and in vitro drug release studies.

PubMed

Froelich, Anna; Osmałek, Tomasz; Snela, Agnieszka; Kunstman, Paweł; Jadach, Barbara; Olejniczak, Marta; Roszak, Grzegorz; Białas, Wojciech

2017-12-01

Microemulsion-based semisolid systems may be considered as an interesting alternative to the traditional dosage forms applied in topical drug delivery. Mechanical properties of topical products are important both in terms of application and dosage form effectiveness. In this study we designed and evaluated novel microemulsion-based gels with indomethacin and analyzed the factors affecting their mechanical characteristics and drug release. The impact of the microemulsion composition on the extent of isotropic region was investigated with the use of pseudoternary phase diagrams. Selected microemulsions were analyzed in terms of electrical conductivity and surface tension in order to determine the microemulsion type. Microemulsions were transformed into polymer-based gels and subjected to rheological and textural studies. Finally, the indomethacin release from the analyzed gels was studied and compared to commercially available product. The extent of isotropic domain in pseudoternary phase diagrams seems to be dependent on the polarity of the oil phase. The surface tension and conductivity monitored as a function of water content in microemulsion systems revealed possible structural transformations from w/o through bicontinuous systems into o/w. The mechanical properties of semisolid microemulsion-based systems depended on the composition of surface active agents and the drug presence. The drug release profiles observed in the case of the investigated gels differed from those recorded for the commercially available product which was most probably caused by the different structure of both systems. Copyright © 2017 Elsevier Inc. All rights reserved.

A Web-Based Learning Support System for Inquiry-Based Learning

NASA Astrophysics Data System (ADS)

Kim, Dong Won; Yao, Jingtao

The emergence of the Internet and Web technology makes it possible to implement the ideals of inquiry-based learning, in which students seek truth, information, or knowledge by questioning. Web-based learning support systems can provide a good framework for inquiry-based learning. This article presents a study on a Web-based learning support system called Online Treasure Hunt. The Web-based learning support system mainly consists of a teaching support subsystem, a learning support subsystem, and a treasure hunt game. The teaching support subsystem allows instructors to design their own inquiry-based learning environments. The learning support subsystem supports students' inquiry activities. The treasure hunt game enables students to investigate new knowledge, develop ideas, and review their findings. Online Treasure Hunt complies with a treasure hunt model. The treasure hunt model formalizes a general treasure hunt game to contain the learning strategies of inquiry-based learning. This Web-based learning support system empowered with the online-learning game and founded on the sound learning strategies furnishes students with the interactive and collaborative student-centered learning environment.

Comparison of cost determination of both resource consumption accounting and time-driven activity-based costing systems in a healthcare setting.

PubMed

Özyapıcı, Hasan; Tanış, Veyis Naci

2017-05-01

Objective The aim of the present study was to explore the differences between resource consumption accounting (RCA) and time-driven activity-based costing (TDABC) systems in determining the costs of services of a healthcare setting. Methods A case study was conducted to calculate the unit costs of open and laparoscopic gall bladder surgeries using TDABC and RCA. Results The RCA system assigns a higher cost both to open and laparoscopic gall bladder surgeries than TDABC. The total cost of unused capacity under the TDABC system is also double that in RCA. Conclusion Unlike TDABC, RCA calculates lower costs for unused capacities but higher costs for products or services in a healthcare setting in which fixed costs make up a high proportion of total costs. What is known about the topic? TDABC is a revision of the activity-based costing (ABC) system. RCA is also a new costing system that includes both the theoretical advantages of ABC and the practical advantages of German costing. However, little is known about the differences arising from application of TDABC and RCA. What does this paper add? There is no study comparing both TDABC and RCA in a single case study based on a real-world healthcare setting. Thus, the present study fills this gap in the literature and it is unique in the sense that it is the first case study comparing TDABC and RCA for open and laparoscopic gall bladder surgeries in a healthcare setting. What are the implications for practitioners? This study provides several interesting results for managers and cost accounting researchers. Thus, it will contribute to the spread of RCA studies in healthcare settings. It will also help the implementers of TDABC to revise data concerning the cost of unused capacity. In addition, by separating costs into fixed and variable, the paper will help managers to create a blended (combined) system that can improve both short- and long-term decisions.

TBIdoc: 3D content-based CT image retrieval system for traumatic brain injury

NASA Astrophysics Data System (ADS)

Li, Shimiao; Gong, Tianxia; Wang, Jie; Liu, Ruizhe; Tan, Chew Lim; Leong, Tze Yun; Pang, Boon Chuan; Lim, C. C. Tchoyoson; Lee, Cheng Kiang; Tian, Qi; Zhang, Zhuo

2010-03-01

Traumatic brain injury (TBI) is a major cause of death and disability. Computed Tomography (CT) scan is widely used in the diagnosis of TBI. Nowadays, large amount of TBI CT data is stacked in the hospital radiology department. Such data and the associated patient information contain valuable information for clinical diagnosis and outcome prediction. However, current hospital database system does not provide an efficient and intuitive tool for doctors to search out cases relevant to the current study case. In this paper, we present the TBIdoc system: a content-based image retrieval (CBIR) system which works on the TBI CT images. In this web-based system, user can query by uploading CT image slices from one study, retrieval result is a list of TBI cases ranked according to their 3D visual similarity to the query case. Specifically, cases of TBI CT images often present diffuse or focal lesions. In TBIdoc system, these pathological image features are represented as bin-based binary feature vectors. We use the Jaccard-Needham measure as the similarity measurement. Based on these, we propose a 3D similarity measure for computing the similarity score between two series of CT slices. nDCG is used to evaluate the system performance, which shows the system produces satisfactory retrieval results. The system is expected to improve the current hospital data management in TBI and to give better support for the clinical decision-making process. It may also contribute to the computer-aided education in TBI.

An Investigation of the Potential for a Computer-based Tutorial Program Covering the Cardiovascular System to Replace Traditional Lectures.

ERIC Educational Resources Information Center

Dewhurst, D. G.; Williams, A. D.

1998-01-01

Presents the results of a comparative study to evaluate the effectiveness of two interactive computer-based learning (CBL) programs, covering the cardiovascular system, as an alternative to lectures for first year undergraduate students at a United Kingdom University. Discusses results in relation to the design of evaluative studies and the future…

The Impact of Classroom Performance System-Based Instruction with Peer Instruction upon Student Achievement and Motivation in Eighth Grade Math Students

ERIC Educational Resources Information Center

Allison, Tracy Michelle Hunter

2012-01-01

The researcher employed two designs to address the research question for this particular study. This quasi-experimental non-equivalent control group study compared the math achievement of 92 eighth grade students who received Classroom Performance System (CPS)-based instruction using Peer Instruction (PI) to 76 eighth grade students who received…

Effects of an Incentive Based Budgeting System on Institutional Performance Indicators: An Exploratory Longitudinal Case Study of a Public University

ERIC Educational Resources Information Center

Willett, Michael S.

2013-01-01

The purpose of this exploratory longitudinal case study was to examine how the implementation of an Incentive Based Budgeting (IBB) system (i.e., Responsibility-Centered Management [RCM]) affected selected institutional performance indicators at the campus level and two comparable schools at a large Mid-Western public University. The value of…

An on-line image data base system: Managing image collections

Treesearch

Malchus B. Baker; Daniel P. Huebner; Peter F. Ffolliott

2000-01-01

Many researchers and land management personnel want photographic records of the phases of their studies or projects. Depending on the personnel and the type of project, a study can result in a few or hundreds of photographic images. A data base system allows users to query using various parameters, such as key words, dates, and project locations, and to view images...

Exploring Multi-Level System Factors Facilitating Educator Training and Implementation of Evidence-Based Practices (EBP): A Study Protocol

ERIC Educational Resources Information Center

Stahmer, Aubyn C.; Suhrheinrich, Jessica; Schetter, Patricia L.; Hassrick, Elizabeth McGee

2018-01-01

This study examines how system-wide (i.e., region, district, and school) mechanisms such as leadership support, training requirements, structure, collaboration, and education affect the use of evidence-based practices (EBPs) in schools and how this affects the outcomes for students with autism spectrum disorder (ASD). Despite growing evidence for…

Contextual Influences in Developing a School-Based Comprehensive Information System.

ERIC Educational Resources Information Center

Dorr-Bremme, Donald W.

This is one of a series of reports based on an ongoing reality test of systemic evaluation for instructional decision making. This feasibility study is being carried out by the Center for the Study of Evaluation with the Laboratory in School and Community Relations at a suburban Los Angeles high school (called Site A). Viewing a school as a…

Comprehensive Challenges for the Well Being of Young Children: A Population-Based Study of Publicly Monitored Risks in a Large Urban Center

ERIC Educational Resources Information Center

Rouse, Heather L.; Fantuzzo, John W.; LeBoeuf, Whitney

2011-01-01

This population-based study investigated the unique and cumulative relations between risks that are monitored by public surveillance systems and academic and behavioral outcomes for an entire cohort of third graders in a large, urban public school system. Using integrated, administrative records from child welfare, public health, housing, and…

Implementation of a Proficiency-Based Diploma System in Maine: Phase II--District Level Analysis

ERIC Educational Resources Information Center

Silvernail, David L.; Stump, Erika K.; McCafferty, Anita Stewart; Hawes, Kathryn M.

2014-01-01

This report describes the findings from Phase II of a study of Maine's implementation of a proficiency-based diploma system. At the request of the Joint Standing Committee on Education and Cultural Affairs of the Maine Legislature, the Maine Policy Research Institute (MEPRI) has conducted a two-phased study of the implementation of Maine law…

Case Studies in Systems Chemistry. Final Report. [Includes Complete Case Study, Carboxylic Acid Equilibria

ERIC Educational Resources Information Center

Fleck, George

This publication was produced as a teaching tool for college chemistry. The book is a text for a computer-based unit on the chemistry of acid-base titrations, and is designed for use with FORTRAN or BASIC computer systems, and with a programmable electronic calculator, in a variety of educational settings. The text attempts to present computer…

Building Assessment Survey and Evaluation Study Summarized Data - HVAC Characteristics

EPA Pesticide Factsheets

In the Building Assessment Survey and Evaluation (BASE) Study Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues was acquired by examining the building plans, conducting a building walk-through, and speaking with the building owner, manager, and/or operator.

The Design and Application of a Web-Based Self- And Peer-Assessment System

ERIC Educational Resources Information Center

Sung, Yao-Ting; Chang, Kuo-En; Chiou, Shen-Kuan; Hou, Huei-Tse

2005-01-01

This study describes the web-based self- and peer-assessments system, or the Web-SPA, which has been shown to provide teachers with a flexible interface with which to arrange various self- and peer-assessment procedures. Secondly, this study examines the effects of the application of the progressively focused self- and peer-assessment (PFSPA)…

The Effectiveness of the Gesture-Based Learning System (GBLS) and Its Impact on Learning Experience

ERIC Educational Resources Information Center

Shakroum, Moamer; Wong, Kok Wai; Fung, Lance Chun Che

2016-01-01

Several studies and experiments have been conducted in recent years to examine the value and the advantage of using the Gesture-Based Learning System (GBLS).The investigation of the influence of the GBLS mode on the learning outcomes is still scarce. Most previous studies did not address more than one category of learning outcomes (cognitive,…

A Java-based enterprise system architecture for implementing a continuously supported and entirely Web-based exercise solution.

PubMed

Wang, Zhihui; Kiryu, Tohru

2006-04-01

Since machine-based exercise still uses local facilities, it is affected by time and place. We designed a web-based system architecture based on the Java 2 Enterprise Edition that can accomplish continuously supported machine-based exercise. In this system, exercise programs and machines are loosely coupled and dynamically integrated on the site of exercise via the Internet. We then extended the conventional health promotion model, which contains three types of players (users, exercise trainers, and manufacturers), by adding a new player: exercise program creators. Moreover, we developed a self-describing strategy to accommodate a variety of exercise programs and provide ease of use to users on the web. We illustrate our novel design with examples taken from our feasibility study on a web-based cycle ergometer exercise system. A biosignal-based workload control approach was introduced to ensure that users performed appropriate exercise alone.

Design method of ARM based embedded iris recognition system

NASA Astrophysics Data System (ADS)

Wang, Yuanbo; He, Yuqing; Hou, Yushi; Liu, Ting

2008-03-01

With the advantages of non-invasiveness, uniqueness, stability and low false recognition rate, iris recognition has been successfully applied in many fields. Up to now, most of the iris recognition systems are based on PC. However, a PC is not portable and it needs more power. In this paper, we proposed an embedded iris recognition system based on ARM. Considering the requirements of iris image acquisition and recognition algorithm, we analyzed the design method of the iris image acquisition module, designed the ARM processing module and its peripherals, studied the Linux platform and the recognition algorithm based on this platform, finally actualized the design method of ARM-based iris imaging and recognition system. Experimental results show that the ARM platform we used is fast enough to run the iris recognition algorithm, and the data stream can flow smoothly between the camera and the ARM chip based on the embedded Linux system. It's an effective method of using ARM to actualize portable embedded iris recognition system.

A study of renal function influence by integrating cloud-based manometers and physician order entry systems.

PubMed

Lin, Yuh-Feng; Sheng, Li-Huei; Wu, Mei-Yi; Zheng, Cai-Mei; Chang, Tian-Jong; Li, Yu-Chuan; Huang, Yu-Hui; Lu, Hsi-Peng

2014-12-01

No evidence exists from randomized trials to support using cloud-based manometers integrated with available physician order entry systems for tracking patient blood pressure (BP) to assist in the control of renal function deterioration. We investigated how integrating cloud-based manometers with physician order entry systems benefits our outpatient chronic kidney disease patients compared with typical BP tracking systems. We randomly assigned 36 chronic kidney disease patients to use cloud-based manometers integrated with physician order entry systems or typical BP recording sheets, and followed the patients for 6 months. The composite outcome was that the patients saw improvement both in BP and renal function. We compared the systolic and diastolic BP (SBP and DBP), and renal function of our patients at 0 months, 3 months, and 6 months after using the integrated manometers and typical BP monitoring sheets. Nighttime SBP and DBP were significantly lower in the study group compared with the control group. Serum creatinine level in the study group improved significantly compared with the control group after the end of Month 6 (2.83 ± 2.0 vs. 4.38 ± 3.0, p = 0.018). Proteinuria improved nonsignificantly in Month 6 in the study group compared with the control group (1.05 ± 0.9 vs. 1.90 ± 1.3, p = 0.09). Both SBP and DBP during the nighttime hours improved significantly in the study group compared with the baseline. In pre-end-stage renal disease patients, regularly monitoring BP by integrating cloud-based manometers appears to result in a significant decrease in creatinine and improvement in nighttime BP control. Estimated glomerular filtration rate and proteinuria were found to be improved nonsignificantly, and thus, larger population and longer follow-up studies may be needed.

Development and characterization of silica and titania based nano structured materials for the removal of indoor and outdoor air pollutants

NASA Astrophysics Data System (ADS)

Peiris, Thelge Manindu Nirasha

Solar energy driven catalytic systems have gained popularity in environmental remediation recently. Various photocatalytic systems have been reported in this regard and most of the photocatalysts are based on well-known semiconducting material, Titanium Dioxide, while some are based on other materials such as Silicon Dioxide and various Zeolites. However, in titania based photocatalysts, titania is actively involved in the catalytic mechanism by absorbing light and generating exitons. Because of this vast popularity of titania in the field of photocatalysis it is believed that photocatalysis mainly occurs via non-localized mechanisms and semiconductors are extremely important. Even though it is still rare, photocatalysis could be localized and possible without use of a semiconductor as well. Thus, to support localized photocatalytic systems, and to compare the activity to titania based systems, degradation of organic air pollutants by nanostructured silica, titania and mixed silica titania systems were studied. New materials were prepared using two different approaches, precipitation technique (xerogel) and aerogel preparation technique. The prepared xerogel samples were doped with both metal (silver) and non-metals (carbon and sulfur) and aerogel samples were loaded with Chromium, Cobalt and Vanadium separately, in order to achieve visible light photocatalytic activity. Characterization studies of the materials were carried out using Nova BET analysis, DR UV-vis spectrometry, powder X-ray diffraction, X-ray photoelectron Spectroscopy, FT-IR spectroscopy, Transmission Electron Microscopy, etc. Kinetics of the catalytic activities was studied using a Shimadzu GCMS-QP 5000 instrument using a closed glass reactor. All the experiments were carried out in gaseous phase using acetaldehyde as the model pollutant. Kinetic results suggest that chromium doped silica systems are good UV and visible light active photocatalysts. This is a good example for a localized photocatalytic activity. In contrast, our xerogel system shows comparatively high visible light photocatalytic activity for the titania based system, showing the importance of non-localized nature of photocatalysis. The Cobalt doped silica system shows interesting dark catalytic activity towards acetaldehyde and several other pollutants. Thus, in summary, based on the different activities we observed during our studies these materials could be successfully used to improve the quality of both indoor and outdoor air.

Using the web for recruitment, screen, tracking, data management, and quality control in a dietary assessment clinical validation trial.

PubMed

Arab, Lenore; Hahn, Harry; Henry, Judith; Chacko, Sara; Winter, Ashley; Cambou, Mary C

2010-03-01

Screening and tracking subjects and data management in clinical trials require significant investments in manpower that can be reduced through the use of web-based systems. To support a validation trial of various dietary assessment tools that required multiple clinic visits and eight repeats of online assessments, we developed an interactive web-based system to automate all levels of management of a biomarker-based clinical trial. The "Energetics System" was developed to support 1) the work of the study coordinator in recruiting, screening and tracking subject flow, 2) the need of the principal investigator to review study progress, and 3) continuous data analysis. The system was designed to automate web-based self-screening into the trial. It supported scheduling tasks and triggered tailored messaging for late and non-responders. For the investigators, it provided real-time status overviews on all subjects, created electronic case reports, supported data queries and prepared analytic data files. Encryption and multi-level password protection were used to insure data privacy. The system was programmed iteratively and required six months of a web programmer's time along with active team engagement. In this study the enhancement in speed and efficiency of recruitment and quality of data collection as a result of this system outweighed the initial investment. Web-based systems have the potential to streamline the process of recruitment and day-to-day management of clinical trials in addition to improving efficiency and quality. Because of their added value they should be considered for trials of moderate size or complexity. Copyright 2009 Elsevier Inc. All rights reserved.

What Do Stroke Patients Look for in Game-Based Rehabilitation: A Survey Study.

PubMed

Hung, Ya-Xuan; Huang, Pei-Chen; Chen, Kuan-Ta; Chu, Woei-Chyn

2016-03-01

Stroke is one of the most common causes of physical disability, and early, intensive, and repetitive rehabilitation exercises are crucial to the recovery of stroke survivors. Unfortunately, research shows that only one third of stroke patients actually perform recommended exercises at home, because of the repetitive and mundane nature of conventional rehabilitation exercises. Thus, to motivate stroke survivors to engage in monotonous rehabilitation is a significant issue in the therapy process. Game-based rehabilitation systems have the potential to encourage patients continuing rehabilitation exercises at home. However, these systems are still rarely adopted at patients' places. Discovering and eliminating the obstacles in promoting game-based rehabilitation at home is therefore essential. For this purpose, we conducted a study to collect and analyze the opinions and expectations of stroke patients and clinical therapists. The study is composed of 2 parts: Rehab-preference survey - interviews to both patients and therapists to understand the current practices, challenges, and expectations on game-based rehabilitation systems; and Rehab-compatibility survey - a gaming experiment with therapists to elaborate what commercial games are compatible with rehabilitation. The study is conducted with 30 outpatients with stroke and 19 occupational therapists from 2 rehabilitation centers in Taiwan. Our surveys show that game-based rehabilitation systems can turn the rehabilitation exercises more appealing and provide personalized motivation for various stroke patients. Patients prefer to perform rehabilitation exercises with more diverse and fun games, and need cost-effective rehabilitation systems, which are often built on commodity hardware. Our study also sheds light on incorporating the existing design-for-fun games into rehabilitation system. We envision the results are helpful in developing a platform which enables rehab-compatible (i.e., existing, appropriately selected) games to be operated on commodity hardware and brings cost-effective rehabilitation systems to more and more patients' home for long-term recovery.

Real time control of a combined sewer system using radar-measured precipitation--results of the pilot study.

PubMed

Petruck, A; Holtmeier, E; Redder, A; Teichgräber, B

2003-01-01

Emschergenossenschaft and Lippeverband have developed a method to use radar-measured precipitation as an input for a real-time control of a combined sewer system containing several overflow structures. Two real-time control strategies have been developed and tested, one is solely volume-based, the other is volume and pollution-based. The system has been implemented in a pilot study in Gelsenkirchen, Germany. During the project the system was optimised and is now in constant operation. It was found, that the volume of combined sewage overflow could be reduced by 5 per cent per year. This was also found in simulations carried out in similar catchment areas. Most of the potential of improvement can already be achieved by local pollution-based control strategies.

High-precision measurements of cementless acetabular components using model-based RSA: an experimental study.

PubMed

Baad-Hansen, Thomas; Kold, Søren; Kaptein, Bart L; Søballe, Kjeld

2007-08-01

In RSA, tantalum markers attached to metal-backed acetabular cups are often difficult to detect on stereo radiographs due to the high density of the metal shell. This results in occlusion of the prosthesis markers and may lead to inconclusive migration results. Within the last few years, new software systems have been developed to solve this problem. We compared the precision of 3 RSA systems in migration analysis of the acetabular component. A hemispherical and a non-hemispherical acetabular component were mounted in a phantom. Both acetabular components underwent migration analyses with 3 different RSA systems: conventional RSA using tantalum markers, an RSA system using a hemispherical cup algorithm, and a novel model-based RSA system. We found narrow confidence intervals, indicating high precision of the conventional marker system and model-based RSA with regard to migration and rotation. The confidence intervals of conventional RSA and model-based RSA were narrower than those of the hemispherical cup algorithm-based system regarding cup migration and rotation. The model-based RSA software combines the precision of the conventional RSA software with the convenience of the hemispherical cup algorithm-based system. Based on our findings, we believe that these new tools offer an improvement in the measurement of acetabular component migration.

X-33 Base Region Thermal Protection System Design Study

NASA Technical Reports Server (NTRS)

Lycans, Randal W.

1998-01-01

The X-33 is an advanced technology demonstrator for validating critical technologies and systems required for an operational Single-Stage-to-Orbit (SSTO) Reusuable Launch Vehicle (RLV). Currently under development by a unique contractor/government team led by Lockheed- Martin Skunk Works (LMSW), and managed by Marshall Space Flight Center (MSFC), the X-33 will be the prototype of the first new launch system developed by the United States since the advent of the space shuttle. This paper documents a design trade study of the X-33 base region thermal protection system (TPS). Two candidate designs were evaluated for thermal performance and weight. The first candidate was a fully reusable metallic TPS using Inconel honeycomb panels insulated with high temperature fibrous insulation, while the second was an ablator/insulator sprayed on the metallic skin of the vehicle. The TPS configurations and insulation thickness requirements were determined for the predicted main engine plume heating environments and base region entry aerothermal environments. In addition to thermal analysis of the design concepts, sensitivity studies were performed to investigate the effect of variations in key parameters of the base TPS analysis.

Analytical stability and simulation response study for a coupled two-body system

NASA Technical Reports Server (NTRS)

Tao, K. M.; Roberts, J. R.

1975-01-01

An analytical stability study and a digital simulation response study of two connected rigid bodies are documented. Relative rotation of the bodies at the connection is allowed, thereby providing a model suitable for studying system stability and response during a soft-dock regime. Provisions are made of a docking port axes alignment torque and a despin torque capability for encountering spinning payloads. Although the stability analysis is based on linearized equations, the digital simulation is based on nonlinear models.

Salmonella Typhimurium and Staphylococcus aureus dynamics in/on variable (micro)structures of fish-based model systems at suboptimal temperatures.

PubMed

Baka, Maria; Verheyen, Davy; Cornette, Nicolas; Vercruyssen, Stijn; Van Impe, Jan F

2017-01-02

The limited knowledge concerning the influence of food (micro)structure on microbial dynamics decreases the accuracy of the developed predictive models, as most studies have mainly been based on experimental data obtained in liquid microbiological media or in/on real foods. The use of model systems has a great potential when studying this complex factor. Apart from the variability in (micro)structural properties, model systems vary in compositional aspects, as a consequence of their (micro)structural variation. In this study, different experimental food model systems, with compositional and physicochemical properties similar to fish patés, are developed to study the influence of food (micro)structure on microbial dynamics. The microbiological safety of fish products is of major importance given the numerous cases of salmonellosis and infections attributed to staphylococcus toxins. The model systems understudy represent food (micro)structures of liquids, aqueous gels, emulsions and gelled emulsions. The growth/inactivation dynamics and a modelling approach of combined growth and inactivation of Salmonella Typhimurium and Staphylococcus aureus, related to fish products, are investigated in/on these model systems at temperatures relevant to fish products' common storage (4°C) and to abuse storage temperatures (8 and 12°C). ComBase (http://www.combase.cc/) predictions compared with the maximum specific growth rate (μ max ) values estimated by the Baranyi and Roberts model in the current study indicated that the (micro)structure influences the microbial dynamics. Overall, ComBase overestimated microbial growth at the same pH, a w and storage temperature. Finally, the storage temperature had also an influence on how much each model system affected the microbial dynamics. Copyright © 2016. Published by Elsevier B.V.

Outcomes from Building System Courseware for Teaching and Testing in a Discipline-Based Human Structure Curriculum

ERIC Educational Resources Information Center

Reilly, Frank D.

2011-01-01

This study investigated the educational benefits of system-based lecture notes and interactive learning objects in a peripheral nervous system component of a traditional first-year medical school human anatomy course. The impetus for the investigation was anecdotal evidence suggesting enhanced learner satisfaction with the learning resources.…

Examining Factors Affecting College Students' Intention to Use Web-Based Instruction Systems: Towards an Integrated Model

ERIC Educational Resources Information Center

Chen, Yi-Cheng; Lin, Yi-Chien; Yeh, Ron Chuen; Lou, Shi-Jer

2013-01-01

With accelerated progress of information and communication technologies (ICT), web-based instruction (WBI) is becoming a popular method for education resources distributing and delivering. This study was conducted to explore what factors influence college students' behavioral intentions to utilize WBI systems. To achieve this aim, a WBI system was…

Use of Point-of-Service Systems in School Nutrition Programs: Types, Challenges, and Employee Training

ERIC Educational Resources Information Center

Lee, Yee Ming; Kwon, Junehee; Park, Eunhye; Wang, Yujia; Rushing, Keith

2017-01-01

Purpose/Objectives: This study investigated the use of electronic and paper-based point-of-service (POS) systems in school nutrition programs (SNPs), including associated challenges and the desired skills and existing training practices for personnel handling such systems. Methods: A questionnaire was developed based on interviews with 25 SNP…

Development and Effectiveness Analysis of a Personalized Ubiquitous Multi-Device Certification Tutoring System Based on Bloom's Taxonomy of Educational Objectives

ERIC Educational Resources Information Center

Hwang, Gwo-Haur; Chen, Beyin; Huang, Cin-Wei

2016-01-01

In recent years, with the gradual increase in the importance of professional certificates, improvement in certification tutoring systems has become more important. In this study, we have developed a personalized ubiquitous multi-device certification tutoring system (PUMDCTS) based on "Bloom's Taxonomy of Educational Objectives," and…

Yet Another Adaptive Learning Management System Based on Felder and Silverman's Learning Styles and Mashup

ERIC Educational Resources Information Center

Chang, Yi-Hsing; Chen, Yen-Yi; Chen, Nian-Shing; Lu, You-Te; Fang, Rong-Jyue

2016-01-01

This study designs and implements an adaptive learning management system based on Felder and Silverman's Learning Style Model and the Mashup technology. In this system, Felder and Silverman's Learning Style model is used to assess students' learning styles, in order to provide adaptive learning to leverage learners' learning preferences.…

The research of binocular vision ranging system based on LabVIEW

NASA Astrophysics Data System (ADS)

Li, Shikuan; Yang, Xu

2017-10-01

Based on the study of the principle of binocular parallax ranging, a binocular vision ranging system is designed and built. The stereo matching algorithm is realized by LabVIEW software. The camera calibration and distance measurement are completed. The error analysis shows that the system fast, effective, can be used in the corresponding industrial occasions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bower, G.

We summarize the current status and future developments of the North American Group's Java-based system for studying physics and detector design issues at a linear collider. The system is built around Java Analysis Studio (JAS) an experiment-independent Java-based utility for data analysis. Although the system is an integrated package running in JAS, many parts of it are also standalone Java utilities.

Development of an Adaptive Learning System with Multiple Perspectives based on Students' Learning Styles and Cognitive Styles

ERIC Educational Resources Information Center

Yang, Tzu-Chi; Hwang, Gwo-Jen; Yang, Stephen Jen-Hwa

2013-01-01

In this study, an adaptive learning system is developed by taking multiple dimensions of personalized features into account. A personalized presentation module is proposed for developing adaptive learning systems based on the field dependent/independent cognitive style model and the eight dimensions of Felder-Silverman's learning style. An…

Satellite power system: Concept development and evaluation program, reference system report

NASA Technical Reports Server (NTRS)

1979-01-01

The Satellite Power System (SPS) Reference System is discussed and the technical and operational information required in support of environmental, socioeconomic, and comparative assessment studies are emphasized. The reference System concept features a gallium-aluminum-arsenide, and silicon solar cell options. Other aspects of an SPS are the construction of bases in space, launch and mission control bases on earth, and fleets of various transportation vehicles to support the construction and maintenance operations of the satellites.

The use of a mobile assistant learning system for health education based on project-based learning.

PubMed

Wu, Ting-Ting

2014-10-01

With the development of mobile devices and wireless technology, mobile technology has gradually infiltrated nursing practice courses to facilitate instruction. Mobile devices save manpower and reduce errors while enhancing nursing students' professional knowledge and skills. To achieve teaching objectives and address the drawbacks of traditional education, this study presents a mobile assistant learning system to help nursing students prepare health education materials. The proposed system is based on a project-based learning strategy to assist nursing students with internalizing professional knowledge and developing critical thinking skills. Experimental results show that the proposed mobile system and project-based learning strategy can promote learning effectiveness and efficiency. Most nursing students and nursing educators showed positive attitudes toward this mobile learning system and looked forward to using it again in related courses in the future.

Criteria for the evaluation of a cloud-based hospital information system outsourcing provider.

PubMed

Low, Chinyao; Hsueh Chen, Ya

2012-12-01

As cloud computing technology has proliferated rapidly worldwide, there has been a trend toward adopting cloud-based hospital information systems (CHISs). This study examines the critical criteria for selecting the CHISs outsourcing provider. The fuzzy Delphi method (FDM) is used to evaluate the primary indicator collected from 188 useable responses at a working hospital in Taiwan. Moreover, the fuzzy analytic hierarchy process (FAHP) is employed to calculate the weights of these criteria and establish a fuzzy multi-criteria model of CHISs outsourcing provider selection from 42 experts. The results indicate that the five most critical criteria related to CHISs outsourcing provider selection are (1) system function, (2) service quality, (3) integration, (4) professionalism, and (5) economics. This study may contribute to understanding how cloud-based hospital systems can reinforce content design and offer a way to compete in the field by developing more appropriate systems.

Laser rocket system analysis

NASA Technical Reports Server (NTRS)

Jones, W. S.; Forsyth, J. B.; Skratt, J. P.

1979-01-01

The laser rocket systems investigated in this study were for orbital transportation using space-based, ground-based and airborne laser transmitters. The propulsion unit of these systems utilizes a continuous wave (CW) laser beam focused into a thrust chamber which initiates a plasma in the hydrogen propellant, thus heating the propellant and providing thrust through a suitably designed nozzle and expansion skirt. The specific impulse is limited only by the ability to adequately cool the thruster and the amount of laser energy entering the engine. The results of the study showed that, with advanced technology, laser rocket systems with either a space- or ground-based laser transmitter could reduce the national budget allocated to space transportation by 10 to 345 billion dollars over a 10-year life cycle when compared to advanced chemical propulsion systems (LO2-LH2) of equal capability. The variation in savings depends upon the projected mission model.

StarBase: A Firm Real-Time Database Manager for Time-Critical Applications

DTIC Science & Technology

1995-01-01

Mellon University [IO]. StarBase differs from previous RT-DBMS work [l, 2, 31 in that a) it relies on a real - time operating system which provides...simulation studies, StarBase uses a real - time operating system to provide basic real-time functionality and deals with issues beyond transaction...re- source scheduling provided by the underlying real - time operating system . Issues of data contention are dealt with by use of a priority

A Preliminary Investigation into the Effect of Standards-Based Grading on the Academic Performance of African-American Students

NASA Astrophysics Data System (ADS)

Bradbury-Bailey, Mary

With the implementation of No Child Left Behind came a wave of educational reform intended for those working with student populations whose academic performance seemed to indicate an alienation from the educational process. Central to these reforms was the implementation of standards-based instruction and their accompanying standardized assessments; however, in one area reform seemed nonexistent---the teacher's gradebook. (Erickson, 2010, Marzano, 2006; Scriffiny, 2008). Given the link between the grading process and achievement motivation, Ames (1992) suggested the use of practices that promote mastery goal orientation. The purpose of this study was to examine the impact of standards-based grading system as a factor contributing to mastery goal orientation on the academic performance of urban African American students. To determine the degree of impact, this study first compared the course content averages and End-of-Course-Test (EOCT) scores for science classes using a traditional grading system to those using a standards-based grading system by employing an Analysis of Covariance (ANCOVA). While there was an increase in all grading areas, two showed a significant difference---the Physical Science course content average (p = 0.024) and ix the Biology EOCT scores (p = 0.0876). These gains suggest that standards-based grading can have a positive impact on the academic performance of African American students. Secondly, this study examined the correlation between the course content averages and the EOCT scores for both the traditional and standards-based grading system; for both Physical Science and Biology, there was a stronger correlation between these two scores for the standards-based grading system.

Web-Based and Mobile Delivery of an Episodic Future Thinking Intervention for Overweight and Obese Families: A Feasibility Study.

PubMed

Sze, Yan Yan; Daniel, Tinuke Oluyomi; Kilanowski, Colleen K; Collins, R Lorraine; Epstein, Leonard H

2015-12-16

The bias toward immediate gratification is associated with maladaptive eating behaviors and has been cross-sectionally and prospectively related to obesity. Engaging in episodic future thinking, which involves mental self-projection to pre-experience future events, reduces this bias and energy intake in overweight/obese adults and children. To examine how episodic future thinking can be incorporated into clinical interventions, a Web-based system was created to provide training for adults and children in their everyday lives. Our study examined the technical feasibility, usability, and acceptability of a Web-based system that is accessible by mobile devices and adapts episodic future thinking for delivery in family-based obesity interventions. We recruited 20 parent-child dyads (N=40) from the surrounding community and randomized to episodic future thinking versus a nutritional information thinking control to test the feasibility of a 4-week Web-based intervention. Parents were 44.1 (SD 7.8) years of age with BMI of 34.2 (SD 6.8) kg/m(2). Children were 11.0 (SD 1.3) years of age with BMI percentile of 96.0 (SD 1.8). Families met weekly with a case manager for 4 weeks and used the system daily. Adherence was collected through the Web-based system, and perceived acceptance of the Web-based system was assessed postintervention. Measurements of body composition and dietary intake were collected at baseline and after the 4 weeks of intervention. All 20 families completed the intervention and attended all sessions. Results showed parents and children had high adherence to the Web-based system and perceived it to be easy to use, useful, and helpful. No differences between conditions were found in adherence for parents (P=.65) or children (P=.27). In addition, results suggest that basic nutrition information along with episodic future thinking delivered through our Web-based system may reduce energy intake and weight. We showed that our Web-based system is an accepted technology and a feasible utility. Furthermore, results provide initial evidence that our system can be incorporated into family-based treatments targeting behaviors related to weight control. These results show promising utility in using our Web-based system in interventions.

Web-Based and Mobile Delivery of an Episodic Future Thinking Intervention for Overweight and Obese Families: A Feasibility Study

PubMed Central

Daniel, Tinuke Oluyomi; Kilanowski, Colleen K; Collins, R Lorraine

2015-01-01

Background The bias toward immediate gratification is associated with maladaptive eating behaviors and has been cross-sectionally and prospectively related to obesity. Engaging in episodic future thinking, which involves mental self-projection to pre-experience future events, reduces this bias and energy intake in overweight/obese adults and children. To examine how episodic future thinking can be incorporated into clinical interventions, a Web-based system was created to provide training for adults and children in their everyday lives. Objective Our study examined the technical feasibility, usability, and acceptability of a Web-based system that is accessible by mobile devices and adapts episodic future thinking for delivery in family-based obesity interventions. Methods We recruited 20 parent-child dyads (N=40) from the surrounding community and randomized to episodic future thinking versus a nutritional information thinking control to test the feasibility of a 4-week Web-based intervention. Parents were 44.1 (SD 7.8) years of age with BMI of 34.2 (SD 6.8) kg/m2. Children were 11.0 (SD 1.3) years of age with BMI percentile of 96.0 (SD 1.8). Families met weekly with a case manager for 4 weeks and used the system daily. Adherence was collected through the Web-based system, and perceived acceptance of the Web-based system was assessed postintervention. Measurements of body composition and dietary intake were collected at baseline and after the 4 weeks of intervention. Results All 20 families completed the intervention and attended all sessions. Results showed parents and children had high adherence to the Web-based system and perceived it to be easy to use, useful, and helpful. No differences between conditions were found in adherence for parents (P=.65) or children (P=.27). In addition, results suggest that basic nutrition information along with episodic future thinking delivered through our Web-based system may reduce energy intake and weight. Conclusions We showed that our Web-based system is an accepted technology and a feasible utility. Furthermore, results provide initial evidence that our system can be incorporated into family-based treatments targeting behaviors related to weight control. These results show promising utility in using our Web-based system in interventions. PMID:26678959

Metal-based nanoparticle interactions with the nervous system: the challenge of brain entry and the risk of retention in the organism.

PubMed

Yokel, Robert; Grulke, Eric; MacPhail, Robert

2013-01-01

This review of metal-based nanoparticles focuses on factors influencing their distribution into the nervous system, evidence they enter brain parenchyma, and nervous system responses. Gold is emphasized as a model metal-based nanoparticle and for risk assessment in the companion review. The anatomy and physiology of the nervous system, basics of colloid chemistry, and environmental factors that influence what cells see are reviewed to provide background on the biological, physical-chemical, and internal milieu factors that influence nervous system nanoparticle uptake. The results of literature searches reveal little nanoparticle research included the nervous system, which about equally involved in vitro and in vivo methods, and very few human studies. The routes of uptake into the nervous system and mechanisms of nanoparticle uptake by cells are presented with examples. Brain nanoparticle uptake inversely correlates with size. The influence of shape has not been reported. Surface charge has not been clearly shown to affect flux across the blood-brain barrier. There is very little evidence for metal-based nanoparticle distribution into brain parenchyma. Metal-based nanoparticle disruption of the blood-brain barrier and adverse brain changes have been shown, and are more pronounced for spheres than rods. Study concentrations need to be put in exposure contexts. Work with dorsal root ganglion cells and brain cells in vitro show the potential for metal-based nanoparticles to produce toxicity. Interpretation of these results must consider the ability of nanoparticles to distribute across the barriers protecting the nervous system. Effects of the persistence of poorly soluble metal-based nanoparticles are of particular concern. Copyright © 2013 Wiley Periodicals, Inc.

[Study of post marketing safety reevaluation of shenqi fuzheng injection].

PubMed

Ai, Qing-Hua; Li, Yuan-Yuan; Xie, Yan-Ming

2014-09-01

In order to promote the Shenqifuzheng injection (SQFZ) clinical medication safety, this study reevaluate on SQFZ post marketing safety study systematically. Including multi center large sample registration type safety monitoring research, the analysis based on national spontaneous reporting system data, the analysis based on the 20 national hospital information system data and literature research. Above the analysis, it suggests that SQFZ has good security. The more adverse drug reaction (ADR) as allergic reactions, mainly involved in the damage of skin, appendages and its systemic damage, serious person can appear allergic shock. ADR/E is more common in the elderly, may be related to medication (tumor) populations. Early warning analysis based on SRS data and literature research are of the view that "phlebitis" has a strong association with SQFZ used.

Cloud-based preoperative planning for total hip arthroplasty: a study of accuracy, efficiency, and compliance.

PubMed

Maratt, Joseph D; Srinivasan, Ramesh C; Dahl, William J; Schilling, Peter L; Urquhart, Andrew G

2012-08-01

As digital radiography becomes more prevalent, several systems for digital preoperative planning have become available. The purpose of this study was to evaluate the accuracy and efficiency of an inexpensive, cloud-based digital templating system, which is comparable with acetate templating. However, cloud-based templating is substantially faster and more convenient than acetate templating or locally installed software. Although this is a practical solution for this particular medical application, regulatory changes are necessary before the tremendous advantages of cloud-based storage and computing can be realized in medical research and clinical practice. Copyright 2012, SLACK Incorporated.

The Proposal of the Model for Developing Dispatch System for Nationwide One-Day Integrative Planning

NASA Astrophysics Data System (ADS)

Kim, Hyun Soo; Choi, Hyung Rim; Park, Byung Kwon; Jung, Jae Un; Lee, Jin Wook

The problems of dispatch planning for container truck are classified as the pickup and delivery problems, which are highly complex issues that consider various constraints in the real world. However, in case of the current situation, it is developed by the control system so that it requires the automated planning system under the view of nationwide integrative planning. Therefore, the purpose of this study is to suggest model to develop the automated dispatch system through the constraint satisfaction problem and meta-heuristic technique-based algorithm. In the further study, the practical system is developed and evaluation is performed in aspect of various results. This study suggests model to undergo the study which promoted the complexity of the problems by considering the various constraints which were not considered in the early study. However, it is suggested that it is necessary to add the study which includes the real-time monitoring function for vehicles and cargos based on the information technology.

Thermodynamic description of multicomponent nickel-base superalloys containing aluminum, chromium, ruthenium and platinum: A computational thermodynamic approach coupled with experiments

NASA Astrophysics Data System (ADS)

Zhu, Jun

Ru and Pt are candidate additional component for improving the high temperature properties of Ni-base superalloys. A thermodynamic description of the Ni-Al-Cr-Ru-Pt system, serving as an essential knowledge base for better alloy design and processing control, was developed in the present study by means of thermodynamic modeling coupled with experimental investigations of phase equilibria. To deal with the order/disorder transition occurring in the Ni-base superalloys, a physical sound model, Cluster/Site Approximation (CSA) was used to describe the fcc phases. The CSA offers computational advantages, without loss of accuracy, over the Cluster Variation Method (CVM) in the calculation of multicomponent phase diagrams. It has been successfully applied to fcc phases in calculating technologically important Ni-Al-Cr phase diagrams. Our effort in this study focused on the two key ternary systems: Ni-Al-Ru and Ni-Al-Pt. The CSA calculated Ni-Al-Ru ternary phase diagrams are in good agreement with the experimental results in the literature and from the current study. A thermodynamic description of quaternary Ni-Al-Cr-Ru was obtained based on the descriptions of the lower order systems and the calculated results agree with experimental data available in literature and in the current study. The Ni-Al-Pt system was thermodynamically modeled based on the limited experimental data available in the literature and obtained from the current study. With the help of the preliminary description, a number of alloy compositions were selected for further investigation. The information obtained was used to improve the current modeling. A thermodynamic description of the Ni-Al-Cr-Pt quaternary was then obtained via extrapolation from its constituent lower order systems. The thermodynamic description for Ni-base superalloy containing Al, Cr, Ru and Pt was obtained via extrapolation. It is believed to be reliable and useful to guide the alloy design and further experimental investigation.

Coal gasification systems engineering and analysis. Appendix C: Alternate product facility designs

NASA Technical Reports Server (NTRS)

1980-01-01

The study of the production of methane, methanol, gasoline, and hydrogen by an add-on facility to a Koppers-Totzek based MBG plant is presented. Applications to a Texaco facility are inferred by evaluation of delta effects from the K-T cases. The production of methane from an add-on facility to a Lurgi based MBG plant and the co-production of methane and methanol from a Lurgi based system is studied. Studies are included of the production of methane from up to 50 percent of the MBG produced in an integrated K-T based plant and the production of methane from up to 50 percent of the MBG produced from an integrated plant in which module 1 is based on K-T technology and modules 2, 3, and 4 are based on Texaco technology.

Comparative analysis of zonal systems for macro-level crash modeling.

PubMed

Cai, Qing; Abdel-Aty, Mohamed; Lee, Jaeyoung; Eluru, Naveen

2017-06-01

Macro-level traffic safety analysis has been undertaken at different spatial configurations. However, clear guidelines for the appropriate zonal system selection for safety analysis are unavailable. In this study, a comparative analysis was conducted to determine the optimal zonal system for macroscopic crash modeling considering census tracts (CTs), state-wide traffic analysis zones (STAZs), and a newly developed traffic-related zone system labeled traffic analysis districts (TADs). Poisson lognormal models for three crash types (i.e., total, severe, and non-motorized mode crashes) are developed based on the three zonal systems without and with consideration of spatial autocorrelation. The study proposes a method to compare the modeling performance of the three types of geographic units at different spatial configurations through a grid based framework. Specifically, the study region is partitioned to grids of various sizes and the model prediction accuracy of the various macro models is considered within these grids of various sizes. These model comparison results for all crash types indicated that the models based on TADs consistently offer a better performance compared to the others. Besides, the models considering spatial autocorrelation outperform the ones that do not consider it. Based on the modeling results and motivation for developing the different zonal systems, it is recommended using CTs for socio-demographic data collection, employing TAZs for transportation demand forecasting, and adopting TADs for transportation safety planning. The findings from this study can help practitioners select appropriate zonal systems for traffic crash modeling, which leads to develop more efficient policies to enhance transportation safety. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

From pattern to process: The strategy of the Earth Observing System: Volume 2: EOS Science Steering Committee report

NASA Technical Reports Server (NTRS)

1987-01-01

The Earth Observing System (EOS) represents a new approach to the study of the Earth. It consists of remotely sensed and correlative in situ observations designed to address important, interrelated global-scale processes. There is an urgent need to study the Earth as a complete, integrated system in order to understand and predict changes caused by human activities and natural processes. The EOS approach is based on an information system concept and designed to provide a long-term study of the Earth using a variety of measurement methods from both operational and research satellite payloads and continuing ground-based Earth science studies. The EOS concept builds on the foundation of the earlier, single-discipline space missions designed for relatively short observation periods. Continued progress in our understanding of the Earth as a system will come from EOS observations spanning several decades using a variety of contemporaneous measurements.

Conceptual design study of Fusion Experimental Reactor (FY86 FER): Safety

NASA Astrophysics Data System (ADS)

Seki, Yasushi; Iida, Hiromasa; Honda, Tsutomu

1987-08-01

This report describes the study on safety for FER (Fusion Experimental Reactor) which has been designed as a next step machine to the JT-60. Though the final purpose of this study is to have an image of design base accident, maximum credible accident and to assess their risk or probability, etc., as FER plant system, the emphasis of this years study is placed on fuel-gas circulation system where the tritium inventory is maximum. The report consists of two chapters. The first chapter summarizes the FER system and describes FMEA (Failure Mode and Effect Analysis) and related accident progression sequence for FER plant system as a whole. The second chapter of this report is focused on fuel-gas circulation system including purification, isotope separation and storage. Probability of risk is assessed by the probabilistic risk analysis (PRA) procedure based on FMEA, ETA and FTA.

Semi-automated extraction of landslides in Taiwan based on SPOT imagery and DEMs

NASA Astrophysics Data System (ADS)

Eisank, Clemens; Hölbling, Daniel; Friedl, Barbara; Chen, Yi-Chin; Chang, Kang-Tsung

2014-05-01

The vast availability and improved quality of optical satellite data and digital elevation models (DEMs), as well as the need for complete and up-to-date landslide inventories at various spatial scales have fostered the development of semi-automated landslide recognition systems. Among the tested approaches for designing such systems, object-based image analysis (OBIA) stepped out to be a highly promising methodology. OBIA offers a flexible, spatially enabled framework for effective landslide mapping. Most object-based landslide mapping systems, however, have been tailored to specific, mainly small-scale study areas or even to single landslides only. Even though reported mapping accuracies tend to be higher than for pixel-based approaches, accuracy values are still relatively low and depend on the particular study. There is still room to improve the applicability and objectivity of object-based landslide mapping systems. The presented study aims at developing a knowledge-based landslide mapping system implemented in an OBIA environment, i.e. Trimble eCognition. In comparison to previous knowledge-based approaches, the classification of segmentation-derived multi-scale image objects relies on digital landslide signatures. These signatures hold the common operational knowledge on digital landslide mapping, as reported by 25 Taiwanese landslide experts during personal semi-structured interviews. Specifically, the signatures include information on commonly used data layers, spectral and spatial features, and feature thresholds. The signatures guide the selection and implementation of mapping rules that were finally encoded in Cognition Network Language (CNL). Multi-scale image segmentation is optimized by using the improved Estimation of Scale Parameter (ESP) tool. The approach described above is developed and tested for mapping landslides in a sub-region of the Baichi catchment in Northern Taiwan based on SPOT imagery and a high-resolution DEM. An object-based accuracy assessment is conducted by quantitatively comparing extracted landslide objects with landslide polygons that were visually interpreted by local experts. The applicability and transferability of the mapping system are evaluated by comparing initial accuracies with those achieved for the following two tests: first, usage of a SPOT image from the same year, but for a different area within the Baichi catchment; second, usage of SPOT images from multiple years for the same region. The integration of the common knowledge via digital landslide signatures is new in object-based landslide studies. In combination with strategies to optimize image segmentation this may lead to a more objective, transferable and stable knowledge-based system for the mapping of landslides from optical satellite data and DEMs.

A Web-based searchable system to confirm magnetic resonance compatibility of implantable medical devices in Japan: a preliminary study.

PubMed

Fujiwara, Yasuhiro; Fujioka, Hitoshi; Watanabe, Tomoko; Sekiguchi, Maiko; Murakami, Ryuji

2017-09-01

Confirmation of the magnetic resonance (MR) compatibility of implanted medical devices (IMDs) is mandatory before conducting magnetic resonance imaging (MRI) examinations. In Japan, few such confirmation methods are in use, and they are time-consuming. This study aimed to develop a Web-based searchable MR safety information system to confirm IMD compatibility and to evaluate the usefulness of the system. First, MR safety information for intravascular stents and stent grafts sold in Japan was gathered by interviewing 20 manufacturers. These IMDs were categorized based on the descriptions available on medical package inserts as: "MR Safe," "MR Conditional," "MR Unsafe," "Unknown," and "No Medical Package Insert Available". An MR safety information database for implants was created based on previously proposed item lists. Finally, a Web-based searchable system was developed using this database. A questionnaire was given to health-care personnel in Japan to evaluate the usefulness of this system. Seventy-nine datasets were collected using information provided by 12 manufacturers and by investigating the medical packaging of the IMDs. Although the datasets must be updated by collecting data from other manufacturers, this system facilitates the easy and rapid acquisition of MR safety information for IMDs, thereby improving the safety of MRI examinations.

Development of a millimetrically scaled biodiesel transesterification device that relies on droplet-based co-axial fluidics

PubMed Central

Yeh, S. I.; Huang, Y. C.; Cheng, C. H.; Cheng, C. M.; Yang, J. T.

2016-01-01

In this study, we investigated a fluidic system that adheres to new concepts of energy production. To improve efficiency, cost, and ease of manufacture, a millimetrically scaled device that employs a droplet-based co-axial fluidic system was devised to complete alkali-catalyzed transesterification for biodiesel production. The large surface-to-volume ratio of the droplet-based system, and the internal circulation induced inside the moving droplets, significantly enhanced the reaction rate of immiscible liquids used here – soybean oil and methanol. This device also decreased the molar ratio between methanol and oil to near the stoichiometric coefficients of a balanced chemical equation, which enhanced the total biodiesel volume produced, and decreased the costs of purification and recovery of excess methanol. In this work, the droplet-based co-axial fluidic system performed better than other methods of continuous-flow production. We achieved an efficiency that is much greater than that of reported systems. This study demonstrated the high potential of droplet-based fluidic chips for energy production. The small energy consumption and low cost of the highly purified biodiesel transesterification system described conforms to the requirements of distributed energy (inexpensive production on a moderate scale) in the world. PMID:27426677

3D Game-Based Learning System for Improving Learning Achievement in Software Engineering Curriculum

ERIC Educational Resources Information Center

Su,Chung-Ho; Cheng, Ching-Hsue

2013-01-01

The advancement of game-based learning has encouraged many related studies, such that students could better learn curriculum by 3-dimension virtual reality. To enhance software engineering learning, this paper develops a 3D game-based learning system to assist teaching and assess the students' motivation, satisfaction and learning achievement. A…

Effects of a Peer Assessment System Based on a Grid-Based Knowledge Classification Approach on Computer Skills Training

ERIC Educational Resources Information Center

Hsu, Ting-Chia

2016-01-01

In this study, a peer assessment system using the grid-based knowledge classification approach was developed to improve students' performance during computer skills training. To evaluate the effectiveness of the proposed approach, an experiment was conducted in a computer skills certification course. The participants were divided into three…

Immunity-Based Optimal Estimation Approach for a New Real Time Group Elevator Dynamic Control Application for Energy and Time Saving

PubMed Central

Baygin, Mehmet; Karakose, Mehmet

2013-01-01

Nowadays, the increasing use of group elevator control systems owing to increasing building heights makes the development of high-performance algorithms necessary in terms of time and energy saving. Although there are many studies in the literature about this topic, they are still not effective enough because they are not able to evaluate all features of system. In this paper, a new approach of immune system-based optimal estimate is studied for dynamic control of group elevator systems. The method is mainly based on estimation of optimal way by optimizing all calls with genetic, immune system and DNA computing algorithms, and it is evaluated with a fuzzy system. The system has a dynamic feature in terms of the situation of calls and the option of the most appropriate algorithm, and it also adaptively works in terms of parameters such as the number of floors and cabins. This new approach which provides both time and energy saving was carried out in real time. The experimental results comparatively demonstrate the effects of method. With dynamic and adaptive control approach in this study carried out, a significant progress on group elevator control systems has been achieved in terms of time and energy efficiency according to traditional methods. PMID:23935433

Energy conversion alternatives study

NASA Technical Reports Server (NTRS)

Shure, L. T.

1979-01-01

Comparison of coal based energy systems is given. Study identifies and compares various advanced energy conversion systems using coal or coal derived fuels for baselaoad electric power generation. Energy Conversion Alternatives Study (ECAS) reports provede government, industry, and general public with technically consistent basis for comparison of system's options of interest for fossilfired electric-utility application.

Competence-Based System Self-Study System for Suggesting Study Materials Links

ERIC Educational Resources Information Center

Nitchot, Athitaya; Gilbert, Lester; Wills, Gary B.

2014-01-01

The article proposes a self-study system which suggests web links to learners. The suggestions depend upon the learner's chosen competences selected from a competence structure for a particular knowledge domain. Three experiments were conducted, where the first compared the perceived usefulness and value of the links generated by different…

Lunar electric power systems utilizing the SP-100 reactor coupled to dynamic conversion systems

NASA Technical Reports Server (NTRS)

Harty, Richard B.; Durand, Richard E.

1993-01-01

An integration study was performed by Rocketdyne under contract to NASA-LeRC. The study was concerned with coupling an SP-0100 reactor to either a Brayton or Stirling power conversion system. The application was for a surface power system to supply power requirements to a lunar base. A power level of 550 kWe was selected based on the NASA Space Exploration Initiative 90-day study. Reliability studies were initially performed to determine optimum power conversion redundancy. This study resulted in selecting three operating engines and one stand-by unit. Integration design studies indicated that either the Brayton or Stirling power conversion systems could be integrated with the PS-100 reactor. The Stirling system had an integration advantage because of smaller piping size and fewer components. The Stirling engine, however, is more complex and heavier than the Brayton rotating unit, which tends to off-set the Stirling integration advantage. From a performance consideration, the Brayton had a 9 percent mass advantage, and the Stirling had a 50 percent radiator advantage.

Performance related issues in distributed database systems

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

1991-01-01

The key elements of research performed during the year long effort of this project are: Investigate the effects of heterogeneity in distributed real time systems; Study the requirements to TRAC towards building a heterogeneous database system; Study the effects of performance modeling on distributed database performance; and Experiment with an ORACLE based heterogeneous system.

The Effectiveness of Full Day School System for Students’ Character Building

NASA Astrophysics Data System (ADS)

Benawa, A.; Peter, R.; Makmun, S.

2018-01-01

The study aims to put forward that full day school which was delivered in Marsudirini Elementary School in Bogor is effective for students’ character building. The study focused on the implementation of full day school system. The qualitative-based research method applied in the study is characteristic evaluation involving non-participant observation, interview, and documentation analysis. The result of this study concludes that the full day school system is significantly effective in education system for elementary students’ character building. The full day school system embraced the entire relevant processes based on the character building standard. The synergy of comprehensive components in instructional process at full day school has influenced the building of the students’ character effectively and efficiently. The relationship emerged between instructional development process in full day school system and the character building of the students. By developing instructional process through systemic and systematic process in full day school system, the support of stakeholders (leaders, human resources, students, parents’ role) and other components (learning resources, facilities, budget) provides a potent and expeditious contribution for character building among the students eventually.

Rule Based Expert System for Monitoring Real Time Drug Supply in Hospital Using Radio Frequency Identification Technology

NASA Astrophysics Data System (ADS)

Driandanu, Galih; Surarso, Bayu; Suryono

2018-02-01

A radio frequency identification (RFID) has obtained increasing attention with the emergence of various applications. This study aims to examine the implementation of rule based expert system supported by RFID technology into a monitoring information system of drug supply in a hospital. This research facilitates in monitoring the real time drug supply by using data sample from the hospital pharmacy. This system able to identify and count the number of drug and provide warning and report in real time. the conclusion is the rule based expert system and RFID technology can facilitate the performance in monitoring the drug supply quickly and precisely.

Healthcare information systems: data mining methods in the creation of a clinical recommender system

NASA Astrophysics Data System (ADS)

Duan, L.; Street, W. N.; Xu, E.

2011-05-01

Recommender systems have been extensively studied to present items, such as movies, music and books that are likely of interest to the user. Researchers have indicated that integrated medical information systems are becoming an essential part of the modern healthcare systems. Such systems have evolved to an integrated enterprise-wide system. In particular, such systems are considered as a type of enterprise information systems or ERP system addressing healthcare industry sector needs. As part of efforts, nursing care plan recommender systems can provide clinical decision support, nursing education, clinical quality control, and serve as a complement to existing practice guidelines. We propose to use correlations among nursing diagnoses, outcomes and interventions to create a recommender system for constructing nursing care plans. In the current study, we used nursing diagnosis data to develop the methodology. Our system utilises a prefix-tree structure common in itemset mining to construct a ranked list of suggested care plan items based on previously-entered items. Unlike common commercial systems, our system makes sequential recommendations based on user interaction, modifying a ranked list of suggested items at each step in care plan construction. We rank items based on traditional association-rule measures such as support and confidence, as well as a novel measure that anticipates which selections might improve the quality of future rankings. Since the multi-step nature of our recommendations presents problems for traditional evaluation measures, we also present a new evaluation method based on average ranking position and use it to test the effectiveness of different recommendation strategies.

Modelling hourly dissolved oxygen concentration (DO) using dynamic evolving neural-fuzzy inference system (DENFIS)-based approach: case study of Klamath River at Miller Island Boat Ramp, OR, USA.

PubMed

Heddam, Salim

2014-01-01

In this study, we present application of an artificial intelligence (AI) technique model called dynamic evolving neural-fuzzy inference system (DENFIS) based on an evolving clustering method (ECM), for modelling dissolved oxygen concentration in a river. To demonstrate the forecasting capability of DENFIS, a one year period from 1 January 2009 to 30 December 2009, of hourly experimental water quality data collected by the United States Geological Survey (USGS Station No: 420853121505500) station at Klamath River at Miller Island Boat Ramp, OR, USA, were used for model development. Two DENFIS-based models are presented and compared. The two DENFIS systems are: (1) offline-based system named DENFIS-OF, and (2) online-based system, named DENFIS-ON. The input variables used for the two models are water pH, temperature, specific conductance, and sensor depth. The performances of the models are evaluated using root mean square errors (RMSE), mean absolute error (MAE), Willmott index of agreement (d) and correlation coefficient (CC) statistics. The lowest root mean square error and highest correlation coefficient values were obtained with the DENFIS-ON method. The results obtained with DENFIS models are compared with linear (multiple linear regression, MLR) and nonlinear (multi-layer perceptron neural networks, MLPNN) methods. This study demonstrates that DENFIS-ON investigated herein outperforms all the proposed techniques for DO modelling.

Use of Model-Based Design Methods for Enhancing Resiliency Analysis of Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Knox, Lenora A.

The most common traditional non-functional requirement analysis is reliability. With systems becoming more complex, networked, and adaptive to environmental uncertainties, system resiliency has recently become the non-functional requirement analysis of choice. Analysis of system resiliency has challenges; which include, defining resilience for domain areas, identifying resilience metrics, determining resilience modeling strategies, and understanding how to best integrate the concepts of risk and reliability into resiliency. Formal methods that integrate all of these concepts do not currently exist in specific domain areas. Leveraging RAMSoS, a model-based reliability analysis methodology for Systems of Systems (SoS), we propose an extension that accounts for resiliency analysis through evaluation of mission performance, risk, and cost using multi-criteria decision-making (MCDM) modeling and design trade study variability modeling evaluation techniques. This proposed methodology, coined RAMSoS-RESIL, is applied to a case study in the multi-agent unmanned aerial vehicle (UAV) domain to investigate the potential benefits of a mission architecture where functionality to complete a mission is disseminated across multiple UAVs (distributed) opposed to being contained in a single UAV (monolithic). The case study based research demonstrates proof of concept for the proposed model-based technique and provides sufficient preliminary evidence to conclude which architectural design (distributed vs. monolithic) is most resilient based on insight into mission resilience performance, risk, and cost in addition to the traditional analysis of reliability.

[A study of culture-based easy identification system for Malassezia].

PubMed

Kaneko, Takamasa

2011-01-01

Most species of this genus are lipid-dependent yeasts, which colonize the seborrheic part of the skin, and they have been reported to be associated with pityriasis versicolor, Malassezia folliculitis, seborrheic dermatitis, and atopic dermatitis. Malassezia have been re-classified into 7 species based on molecular biological analysis of nuclear ribosomal DNA/RNA and new Malassezia species were reported. As members of the genus Malassezia share similar morphological and biochemical characteristics, it was thought to be difficult to differentiate between them based on phenotypic features. While molecular biological techniques are the most reliable methods for identification of Malassezia, they are not available in most clinical laboratories. We studied ( i ) development of an efficient isolation media and culture based easy identification system, ( ii ) the incidence of atypical biochemical features in Malassezia species and propose a culture-based easy identification system for clinically important Malassezia species, M. globosa, M. restricta, and M. furfur.

The status of states' policies to support evidence-based practices in children's mental health.

PubMed

Cooper, Janice L; Aratani, Yumiko

2009-12-01

This study examined the efforts of states' mental health authorities to promote the use of evidence-based practices through policy. Data were drawn from three components of a national study, including a survey of state children's mental health directors (N=53), which was developed using a three-step process that involved stakeholders. Data from the directors' survey revealed that over 90% of states are implementing strategies to support the use of evidence-based practices. The scope of these efforts varies, with 36% reporting statewide reach. Further, states' strategies for implementing evidence-based practices are often not accompanied by comparable efforts to enhance information systems, even though enhancing such systems can bolster opportunities for successful implementation. Variability in the adoption of evidence-based practices, poor attention to information systems, and inconsistent fiscal policies threaten states' efforts to improve the quality of children's mental health services.

Study of a Secondary Power System Based on an Intermediate Bus Converter and POLs

NASA Astrophysics Data System (ADS)

Santoja, Almudena; Fernandez, Arturo; Tonicello, Ferdinando

2014-08-01

Secondary power systems in satellites are everything but standard nowadays. All sorts of options can be found and, in the end, a new custom design is used in most of the cases. Even though this might be interesting in some specific cases, for most of them it would be more convenient to have a straightforward system based on standard components. One of the options to achieve this is to design the secondary power system with an Intermediate Bus Converter (IBC) and Point of Load converters (POLs). This paper presents a study of this architecture and some experimental verifications to establish some basic rules devoted to achieve an optimum design of this system.

Comet/Asteroid Protection System (CAPS): Preliminary Space-Based Concept and Study Results

NASA Technical Reports Server (NTRS)

Mazanek, Daniel D.; Roithmayr, Carlos M.; Antol, Jeffrey; Park, Sang-Young; Koons, Robert H.; Bremer, James C.; Murphy, Douglas G.; Hoffman, James A.; Kumar, Renjith R.; Seywald, Hans

2005-01-01

There exists an infrequent, but significant hazard to life and property due to impacting asteroids and comets. There is currently no specific search for long-period comets, smaller near-Earth asteroids, or smaller short-period comets. These objects represent a threat with potentially little or no warning time using conventional ground-based telescopes. These planetary bodies also represent a significant resource for commercial exploitation, long-term sustained space exploration, and scientific research. The Comet/Asteroid Protection System (CAPS) is a future space-based system concept that provides permanent, continuous asteroid and comet monitoring, and rapid, controlled modification of the orbital trajectories of selected bodies. CAPS would expand the current detection effort to include long-period comets, as well as small asteroids and short-period comets capable of regional destruction. A space-based detection system, despite being more costly and complex than Earth-based initiatives, is the most promising way of expanding the range of detectable objects, and surveying the entire celestial sky on a regular basis. CAPS would provide an orbit modification system capable of diverting kilometer class objects, and modifying the orbits of smaller asteroids for impact defense and resource utilization. This Technical Memorandum provides a compilation of key related topics and analyses performed during the CAPS study, which was performed under the Revolutionary Aerospace Systems Concepts (RASC) program, and discusses technologies that could enable the implementation of this future system.

Failure Diagnosis for the Holdup Tank System via ISFA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Huijuan; Bragg-Sitton, Shannon; Smidts, Carol

This paper discusses the use of the integrated system failure analysis (ISFA) technique for fault diagnosis for the holdup tank system. ISFA is a simulation-based, qualitative and integrated approach used to study fault propagation in systems containing both hardware and software subsystems. The holdup tank system consists of a tank containing a fluid whose level is controlled by an inlet valve and an outlet valve. We introduce the component and functional models of the system, quantify the main parameters and simulate possible failure-propagation paths based on the fault propagation approach, ISFA. The results show that most component failures in themore » holdup tank system can be identified clearly and that ISFA is viable as a technique for fault diagnosis. Since ISFA is a qualitative technique that can be used in the very early stages of system design, this case study provides indications that it can be used early to study design aspects that relate to robustness and fault tolerance.« less

Investigating potential transferability of place-based research in land system science

NASA Astrophysics Data System (ADS)

Václavík, Tomáš; Langerwisch, Fanny; Cotter, Marc; Fick, Johanna; Häuser, Inga; Hotes, Stefan; Kamp, Johannes; Settele, Josef; Spangenberg, Joachim H.; Seppelt, Ralf

2016-09-01

Much of our knowledge about land use and ecosystem services in interrelated social-ecological systems is derived from place-based research. While local and regional case studies provide valuable insights, it is often unclear how relevant this research is beyond the study areas. Drawing generalized conclusions about practical solutions to land management from local observations and formulating hypotheses applicable to other places in the world requires that we identify patterns of land systems that are similar to those represented by the case study. Here, we utilize the previously developed concept of land system archetypes to investigate potential transferability of research from twelve regional projects implemented in a large joint research framework that focus on issues of sustainable land management across four continents. For each project, we characterize its project archetype, i.e. the unique land system based on a synthesis of more than 30 datasets of land-use intensity, environmental conditions and socioeconomic indicators. We estimate the transferability potential of project research by calculating the statistical similarity of locations across the world to the project archetype, assuming higher transferability potentials in locations with similar land system characteristics. Results show that areas with high transferability potentials are typically clustered around project sites but for some case studies can be found in regions that are geographically distant, especially when values of considered variables are close to the global mean or where the project archetype is driven by large-scale environmental or socioeconomic conditions. Using specific examples from the local case studies, we highlight the merit of our approach and discuss the differences between local realities and information captured in global datasets. The proposed method provides a blueprint for large research programs to assess potential transferability of place-based studies to other geographical areas and to indicate possible gaps in research efforts.

The effects of semantic congruency: a research of audiovisual P300-speller.

PubMed

Cao, Yong; An, Xingwei; Ke, Yufeng; Jiang, Jin; Yang, Hanjun; Chen, Yuqian; Jiao, Xuejun; Qi, Hongzhi; Ming, Dong

2017-07-25

Over the past few decades, there have been many studies of aspects of brain-computer interface (BCI). Of particular interests are event-related potential (ERP)-based BCI spellers that aim at helping mental typewriting. Nowadays, audiovisual unimodal stimuli based BCI systems have attracted much attention from researchers, and most of the existing studies of audiovisual BCIs were based on semantic incongruent stimuli paradigm. However, no related studies had reported that whether there is difference of system performance or participant comfort between BCI based on semantic congruent paradigm and that based on semantic incongruent paradigm. The goal of this study was to investigate the effects of semantic congruency in system performance and participant comfort in audiovisual BCI. Two audiovisual paradigms (semantic congruent and incongruent) were adopted, and 11 healthy subjects participated in the experiment. High-density electrical mapping of ERPs and behavioral data were measured for the two stimuli paradigms. The behavioral data indicated no significant difference between congruent and incongruent paradigms for offline classification accuracy. Nevertheless, eight of the 11 participants reported their priority to semantic congruent experiment, two reported no difference between the two conditions, and only one preferred the semantic incongruent paradigm. Besides, the result indicted that higher amplitude of ERP was found in incongruent stimuli based paradigm. In a word, semantic congruent paradigm had a better participant comfort, and maintained the same recognition rate as incongruent paradigm. Furthermore, our study suggested that the paradigm design of spellers must take both system performance and user experience into consideration rather than merely pursuing a larger ERP response.

Technology and Policy Challenges in the Adoption and Operation of Health Information Exchange Systems.

PubMed

Ji, Hyerim; Yoo, Sooyoung; Heo, Eun-Young; Hwang, Hee; Kim, Jeong-Whun

2017-10-01

This study aimed to identify problems and issues that arise with the implementation of online health information exchange (HIE) systems in a medical environment and to identify solutions to facilitate the successful operation of future HIE systems in primary care clinics and hospitals. In this study, the issues that arose during the establishment and operation of an HIE system in a hospital were identified so that they could be addressed to enable the successful establishment and operation of a standard-based HIE system. After the issues were identified, they were reviewed and categorized by a group of experts that included medical information system experts, doctors, medical information standard experts, and HIE researchers. Then, solutions for the identified problems were derived based on the system development, operation, and improvement carried out during this work. Twenty-one issues were identified during the implementation and operation of an online HIE system. These issues were then divided into four categories: system architecture and standards, documents and data items, consent of HIE, and usability. We offer technical and policy recommendations for various stakeholders based on the experiences of operating and improving the online HIE system in the medical field. The issues and solutions identified in this study regarding the implementation and operate of an online HIE system can provide valuable insight for planners to enable them to successfully design and operate such systems at a national level in the future. In addition, policy support from governments is needed.

Vehicle Counting and Moving Direction Identification Based on Small-Aperture Microphone Array.

PubMed

Zu, Xingshui; Zhang, Shaojie; Guo, Feng; Zhao, Qin; Zhang, Xin; You, Xing; Liu, Huawei; Li, Baoqing; Yuan, Xiaobing

2017-05-10

The varying trend of a moving vehicle's angles provides much important intelligence for an unattended ground sensor (UGS) monitoring system. The present study investigates the capabilities of a small-aperture microphone array (SAMA) based system to identify the number and moving direction of vehicles travelling on a previously established route. In this paper, a SAMA-based acoustic monitoring system, including the system hardware architecture and algorithm mechanism, is designed as a single node sensor for the application of UGS. The algorithm is built on the varying trend of a vehicle's bearing angles around the closest point of approach (CPA). We demonstrate the effectiveness of our proposed method with our designed SAMA-based monitoring system in various experimental sites. The experimental results in harsh conditions validate the usefulness of our proposed UGS monitoring system.

The Research and Test of Fast Radio Burst Real-time Search Algorithm Based on GPU Acceleration

NASA Astrophysics Data System (ADS)

Wang, J.; Chen, M. Z.; Pei, X.; Wang, Z. Q.

2017-03-01

In order to satisfy the research needs of Nanshan 25 m radio telescope of Xinjiang Astronomical Observatory (XAO) and study the key technology of the planned QiTai radio Telescope (QTT), the receiver group of XAO studied the GPU (Graphics Processing Unit) based real-time FRB searching algorithm which developed from the original FRB searching algorithm based on CPU (Central Processing Unit), and built the FRB real-time searching system. The comparison of the GPU system and the CPU system shows that: on the basis of ensuring the accuracy of the search, the speed of the GPU accelerated algorithm is improved by 35-45 times compared with the CPU algorithm.

Virosome, a hybrid vehicle for efficient and safe drug delivery and its emerging application in cancer treatment.

PubMed

Liu, Hanqing; Tu, Zhigang; Feng, Fan; Shi, Haifeng; Chen, Keping; Xu, Ximing

2015-06-01

A virosome is an innovative hybrid drug delivery system with advantages of both viral and non-viral vectors. Studies have shown that a virosome can carry various biologically active molecules, such as nucleic acids, peptides, proteins and small organic molecules. Targeted drug delivery using virosome-based systems can be achieved through surface modifications of virosomes. A number of virosome-based prophylactic and therapeutic products with high safety profiles are currently available in the market. Cancer treatment is a big battlefield for virosome-based drug delivery systems. This review provides an overview of the general concept, preparation procedures, working mechanisms, preclinical studies and clinical applications of virosomes in cancer treatment.

Analysis and performance assessment of a new solar-based multigeneration system integrated with ammonia fuel cell and solid oxide fuel cell-gas turbine combined cycle

NASA Astrophysics Data System (ADS)

Siddiqui, Osamah; Dincer, Ibrahim

2017-12-01

In the present study, a new solar-based multigeneration system integrated with an ammonia fuel cell and solid oxide fuel cell-gas turbine combined cycle to produce electricity, hydrogen, cooling and hot water is developed for analysis and performance assessment. In this regard, thermodynamic analyses and modeling through both energy and exergy approaches are employed to assess and evaluate the overall system performance. Various parametric studies are conducted to study the effects of varying system parameters and operating conditions on the energy and exergy efficiencies. The results of this study show that the overall multigeneration system energy efficiency is obtained as 39.1% while the overall system exergy efficiency is calculated as 38.7%, respectively. The performance of this multigeneration system results in an increase of 19.3% in energy efficiency as compared to single generation system. Furthermore, the exergy efficiency of the multigeneration system is 17.8% higher than the single generation system. Moreover, both energy and exergy efficiencies of the solid oxide fuel cell-gas turbine combined cycle are determined as 68.5% and 55.9% respectively.

A knowledge-based system for patient image pre-fetching in heterogeneous database environments--modeling, design, and evaluation.

PubMed

Wei, C P; Hu, P J; Sheng, O R

2001-03-01

When performing primary reading on a newly taken radiological examination, a radiologist often needs to reference relevant prior images of the same patient for confirmation or comparison purposes. Support of such image references is of clinical importance and may have significant effects on radiologists' examination reading efficiency, service quality, and work satisfaction. To effectively support such image reference needs, we proposed and developed a knowledge-based patient image pre-fetching system, addressing several challenging requirements of the application that include representation and learning of image reference heuristics and management of data-intensive knowledge inferencing. Moreover, the system demands an extensible and maintainable architecture design capable of effectively adapting to a dynamic environment characterized by heterogeneous and autonomous data source systems. In this paper, we developed a synthesized object-oriented entity- relationship model, a conceptual model appropriate for representing radiologists' prior image reference heuristics that are heuristic oriented and data intensive. We detailed the system architecture and design of the knowledge-based patient image pre-fetching system. Our architecture design is based on a client-mediator-server framework, capable of coping with a dynamic environment characterized by distributed, heterogeneous, and highly autonomous data source systems. To adapt to changes in radiologists' patient prior image reference heuristics, ID3-based multidecision-tree induction and CN2-based multidecision induction learning techniques were developed and evaluated. Experimentally, we examined effects of the pre-fetching system we created on radiologists' examination readings. Preliminary results show that the knowledge-based patient image pre-fetching system more accurately supports radiologists' patient prior image reference needs than the current practice adopted at the study site and that radiologists may become more efficient, consultatively effective, and better satisfied when supported by the pre-fetching system than when relying on the study site's pre-fetching practice.

75 FR 27112 - Solicitation of Applications and Notice of Funding Availability for the FRA Railroad System...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... (2) to conduct a Study of the Use of Bio- based Technologies (Lubricants) that can be used in... of the Use of Bio-based Technologies.'' The study will focus on the feasibility of using readily... two grants, ``Locomotive Biofuel Study'' and the ``Study of the Use of Bio-based Technologies...

A Question-Answer System for Mobile Devices in Lecture-Based Instruction: A Qualitative Analysis of Student Engagement and Learning

ERIC Educational Resources Information Center

Hatun Atas, Amine; Delialioglu, Ömer

2018-01-01

The aim of this study was to explore the opinions, perceptions and evaluations of students about their experiences with a question-answer system used on mobile devices in a lecture-based course. Basic qualitative research method was employed in this study to understand how students made sense of their experiences during the instruction. The…

A New Method for Studying the Periodic System Based on a Kohonen Neural Network

ERIC Educational Resources Information Center

Chen, David Zhekai

2010-01-01

A new method for studying the periodic system is described based on the combination of a Kohonen neural network and a set of chemical and physical properties. The classification results are directly shown in a two-dimensional map and easy to interpret. This is one of the major advantages of this approach over other methods reported in the…

Problem-based learning in teaching chemistry: enthalpy changes in systems

NASA Astrophysics Data System (ADS)

Ayyildiz, Yildizay; Tarhan, Leman

2018-01-01

Problem-based learning (PBL) as a teaching strategy has recently become quite widespread in especially chemistry classes. Research has found that students, from elementary through college, have many alternative conceptions regarding enthalpy changes in systems. Although there are several studies focused on identifying student alternative conceptions and misunderstandings of this subject, studies on preventing the formation of these alternative conceptions are limited.

Characterizing complexity in socio-technical systems: a case study of a SAMU Medical Regulation Center.

PubMed

Righi, Angela Weber; Wachs, Priscila; Saurin, Tarcísio Abreu

2012-01-01

Complexity theory has been adopted by a number of studies as a benchmark to investigate the performance of socio-technical systems, especially those that are characterized by relevant cognitive work. However, there is little guidance on how to assess, systematically, the extent to which a system is complex. The main objective of this study is to carry out a systematic analysis of a SAMU (Mobile Emergency Medical Service) Medical Regulation Center in Brazil, based on the core characteristics of complex systems presented by previous studies. The assessment was based on direct observations and nine interviews: three of them with regulator of emergencies medical doctor, three with radio operators and three with telephone attendants. The results indicated that, to a great extent, the core characteristics of complexity are magnified) due to basic shortcomings in the design of the work system. Thus, some recommendations are put forward with a view to reducing unnecessary complexity that hinders the performance of the socio-technical system.

pH-dependent Differential Scanning Calorimetry and Dynamic Light Scattering Studies of 21:0 PC and 18:0 PS Lipid Binary System

NASA Astrophysics Data System (ADS)

Ali, Rejwan

2010-03-01

Large unilamallar vesicle has been a model system to study many membrane functions. High Tg lipid systems offer many potential biomedical applications in lipid-based delivery applications. While the optimized vesicle functionalities are achieved by Polyethylene Glycol (PEG) polymer, modified PEG and other functional molecule incorporation, however, the host binary lipid system plays the pivotal role in pH-dependent phase transition based lipid vehicular methods. We have investigated a lipid binary system composed of 21:0 PC (1,2-dihenarachidoyl-sn-glycero-3-phosphocholine) and 18:0 PS(1,2-distearoyl-sn-glycero-3-phospho-L-serine). Preliminary studies implementing differential scanning calorimetry shows pH plays key role in temperature shift and thermotropic phase behavior of the binary system. While dynamic light scattering study shows lipid vesicle size is almost independent of pH changes. We will also present pH-dependent thermodynamic parameters to correlate underlying molecular mechanism in relevant pH-range.

The conceptual design of a hybrid life support system based on the evaluation and comparison of terrestrial testbeds

NASA Astrophysics Data System (ADS)

Czupalla, M.; Horneck, G.; Blome, H. J.

This report summarizes a trade study of different options of a bioregenerative Life Support System (LSS) and a subsequent conceptual design of a hybrid LSS. The evaluation was based mainly on the terrestrial testbed projects MELISSA (ESA) and BIOS (Russia). In addition, some methods suggested by the Advanced Life Support Project (NASA) were considered. Computer models, including mass flows were established for each of the systems with the goal of closing system loops to the extent possible. In order to cope with the differences in the supported crew size and provided nutrition, all systems were scaled for supporting a crew of six for a 780 day Mars mission (180 days transport to Mars; 600 days surface period) as given in the NASA Design Reference Mission Scenario [Hoffman, S.J., Kaplan, D.L. Human exploration of Mars: the Reference Mission of the NASA Mars Exploratory Study, 1997]. All models were scaled to provide the same daily allowances, as of calories, to the crew. Equivalent System Mass (ESM) analysis was used to compare the investigated system models against each other. Following the comparison of the terrestrial systems, the system specific subsystem options for Food Supply, Solid Waste Processing, Water Management and Atmosphere Revitalization were evaluated in a separate trade study. The best subsystem technologies from the trade study were integrated into an overall design solution based on mass flow relationships. The optimized LSS is mainly a bioregenerative system, complemented by a few physico-chemical elements, with a total ESM of 18,088 kg, which is about 4 times higher than that of a pure physico-chemical LSS, as designed in an earlier study.

The conceptual design of a hybrid life support system based on the evaluation and comparison of terrestrial testbeds.

PubMed

Czupalla, M; Horneck, G; Blome, H J

2005-01-01

This report summarizes a trade study of different options of a bioregenerative Life Support System (LSS) and a subsequent conceptual design of a hybrid LSS. The evaluation was based mainly on the terrestrial testbed projects MELISSA (ESA) and BIOS (Russia). In addition, some methods suggested by the Advanced Life Support Project (NASA) were considered. Computer models, including mass flows were established for each of the systems with the goal of closing system loops to the extent possible. In order to cope with the differences in the supported crew size and provided nutrition, all systems were scaled for supporting a crew of six for a 780 day Mars mission (180 days transport to Mars; 600 days surface period) as given in the NASA Design Reference Mission Scenario [Hoffman, S.J., Kaplan, D.L. Human exploration of Mars: the Reference Mission of the NASA Mars Exploratory Study, 1997]. All models were scaled to provide the same daily allowances, as of calories, to the crew. Equivalent System Mass (ESM) analysis was used to compare the investigated system models against each other. Following the comparison of the terrestrial systems, the system specific subsystem options for Food Supply, Solid Waste Processing, Water Management and Atmosphere Revitalization were evaluated in a separate trade study. The best subsystem technologies from the trade study were integrated into an overall design solution based on mass flow relationships. The optimized LSS is mainly a bioregenerative system, complemented by a few physico-chemical elements, with a total ESM of 18,088 kg, which is about 4 times higher than that of a pure physico-chemical LSS, as designed in an earlier study. c2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

A novel framework of tissue membrane systems for image fusion.

PubMed

Zhang, Zulin; Yi, Xinzhong; Peng, Hong

2014-01-01

This paper proposes a tissue membrane system-based framework to deal with the optimal image fusion problem. A spatial domain fusion algorithm is given, and a tissue membrane system of multiple cells is used as its computing framework. Based on the multicellular structure and inherent communication mechanism of the tissue membrane system, an improved velocity-position model is developed. The performance of the fusion framework is studied with comparison of several traditional fusion methods as well as genetic algorithm (GA)-based and differential evolution (DE)-based spatial domain fusion methods. Experimental results show that the proposed fusion framework is superior or comparable to the other methods and can be efficiently used for image fusion.

Social patterns of pay systems and their associations with psychosocial job characteristics and burnout among paid employees in Taiwan.

PubMed

Yeh, Wan-Yu; Cheng, Yawen; Chen, Chiou-Jung

2009-04-01

Today, performance-based pay systems, also known as variable pay systems, are commonly implemented in workplaces as a business strategy to improve workers' performance and reduce labor costs. However, their impact on workers' job stress and stress-related health outcomes has rarely been investigated. By utilizing data from a nationally representative sample of paid employees in Taiwan, we examined the distribution of variable pay systems across socio-demographic categories and employment sectors. We also examined the associations of pay systems with psychosocial job characteristics (assessed by Karasek's Demand-Control model) and self-reported burnout status (measured by the Chinese version of the Copenhagen Burnout Inventory). A total of 8906 men and 6382 women aged 25-65 years were studied, and pay systems were classified into three categories, i.e., fixed salary, performance-based pay (with a basic salary), and piece-rated or time-based pay (without a basic salary). Results indicated that in men, 57% of employees were given a fixed salary, 24% were given a performance-based pay, and 19% were remunerated through a piece-rated or time-based pay. In women, the distributions of the 3 pay systems were 64%, 20% and 15%, respectively. Among the three pay systems, employees earning through a performance-based pay were found to have the longest working hours, highest level of job control, and highest percentage of workers who perceived high stress at work. Those remunerated through a piece-rated/time-based pay were found to have the lowest job control, shortest working hours, highest job insecurity, lowest potential for career growth, and lowest job satisfaction. The results of multivariate regression analyses showed that employees earning through performance-based and piece-rated pay systems showed higher scores for personal burnout and work-related burnout, as compared to those who were given fixed salaries, after adjusting for age, education, marital status, employment grade, job characteristics, and family care workloads. As variable pay systems have gained in popularity, findings from this study call for more attention on the tradeoff between the widely discussed management advantages of such pay systems and the health burden they place on employees.

Simultaneous detection and classification of breast masses in digital mammograms via a deep learning YOLO-based CAD system.

PubMed

Al-Masni, Mohammed A; Al-Antari, Mugahed A; Park, Jeong-Min; Gi, Geon; Kim, Tae-Yeon; Rivera, Patricio; Valarezo, Edwin; Choi, Mun-Taek; Han, Seung-Moo; Kim, Tae-Seong

2018-04-01

Automatic detection and classification of the masses in mammograms are still a big challenge and play a crucial role to assist radiologists for accurate diagnosis. In this paper, we propose a novel Computer-Aided Diagnosis (CAD) system based on one of the regional deep learning techniques, a ROI-based Convolutional Neural Network (CNN) which is called You Only Look Once (YOLO). Although most previous studies only deal with classification of masses, our proposed YOLO-based CAD system can handle detection and classification simultaneously in one framework. The proposed CAD system contains four main stages: preprocessing of mammograms, feature extraction utilizing deep convolutional networks, mass detection with confidence, and finally mass classification using Fully Connected Neural Networks (FC-NNs). In this study, we utilized original 600 mammograms from Digital Database for Screening Mammography (DDSM) and their augmented mammograms of 2,400 with the information of the masses and their types in training and testing our CAD. The trained YOLO-based CAD system detects the masses and then classifies their types into benign or malignant. Our results with five-fold cross validation tests show that the proposed CAD system detects the mass location with an overall accuracy of 99.7%. The system also distinguishes between benign and malignant lesions with an overall accuracy of 97%. Our proposed system even works on some challenging breast cancer cases where the masses exist over the pectoral muscles or dense regions. Copyright © 2018 Elsevier B.V. All rights reserved.

Distributed sensor architecture for intelligent control that supports quality of control and quality of service.

PubMed

Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

2015-02-25

This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems.

Distributed Sensor Architecture for Intelligent Control that Supports Quality of Control and Quality of Service

PubMed Central

Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

2015-01-01

This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems. PMID:25723145

Critical incidents reveal how patients with head and neck cancer construct their "secure base" as a "helping system".

PubMed

Isaksson, Joakim; Salander, Pär; Granström, Brith; Laurell, Göran

2014-01-01

Most studies of the psychosocial needs of patients with head and neck cancers (HNC) use predefined categories and explicitly ask for specified needs. These studies are important but should be complemented with inductive studies based on patients' own descriptions of experiences. This qualitative study is such a contribution. In repeated interviews positive and negative incidents were collected from 137 patients with HNC, and these experiences were categorized in dimensions expressing needs. A core category--"being included--neglected by a helping system"--emerged from the narrated incidents and was based on the dimensions engagement, competence, and information. The findings are easily related to attachment theory by stressing the significance of establishing trustful relationships with the health care staff, as attachment figures, who respond flexibly and sensitively to the patient's needs. In the constitution of health care as a helping system, all encounters between the patient and health care staff matters. Further research should preferably focus on the creation of guidelines for the constitution of health care as a helping system, that is, how the found factors of a helping system can be operationalized in clinical practice.

A Review of Propulsion Industrial Base Studies and an Introduction to the National Institute of Rocket Propulsion Systems

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv; Fry, Emma K.

2012-01-01

Over the past decade there have been over 40 studies that have examined the state of the industrial base and infrastructure that supports propulsion systems development in the United States. This paper offers a comprehensive, systematic review of these studies and develops conclusions and recommendations in the areas of budget, policy, sustainment, infrastructure, workforce retention and development and mission/vision and policy. The National Institute for Rocket Propulsion System (NIRPS) is a coordinated, national organization that is responding to the key issues highlighted in these studies. The paper outlines the case for NIRPS and the specific actions that the Institute is taking to address these issues.

High-priority and low-priority drug-drug interactions in different international electronic health record systems: A comparative study.

PubMed

Cornu, Pieter; Phansalkar, Shobha; Seger, Diane L; Cho, Insook; Pontefract, Sarah; Robertson, Alexandra; Bates, David W; Slight, Sarah P

2018-03-01

To investigate whether alert warnings for high-priority and low-priority drug-drug interactions (DDIs) were present in five international electronic health record (EHR) systems, to compare and contrast the severity level assigned to them, and to establish the proportion of alerts that were overridden. We conducted a comparative, retrospective, multinational study using a convenience sample of 5 EHRs from the U.S., U.K., Republic of Korea and Belgium. Of the 15 previously defined, high-priority, class-based DDIs, alert warnings were found to exist for 11 in both the Korean and UK systems, 9 in the Belgian system, and all 15 in the two US systems. The specific combinations that were included in these class-based DDIs varied considerably in number, type and level of severity amongst systems. Alerts were only active for 8.4% (52/619) and 52.4% (111/212) of the specific drug-drug combinations contained in the Belgian and UK systems, respectively. Hard stops (not possible to override) existed in the US and UK systems only. The override rates for high-priority alerts requiring provider action ranged from 56.7% to 83.3%. Of the 33 previously defined low-priority DDIs, active alerts existed only in the US systems, for three class-based DDIs. The majority were non-interruptive. Alert warnings existed for most of the high-priority DDIs in the different EHRs but overriding them was easy in most of the systems. In addition to validating the high- and low-priority DDIs, this study reported a lack of standardization in DDI levels across different international knowledge bases. Copyright © 2017. Published by Elsevier B.V.

Evaluation of installed solar systems at Navy, Army, and Air Force Bases. Final report, October 1984-September 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durlak, E.R.

1986-05-01

This report presents a summary of the results of site-evaluation inspection conducted at Navy, Army, and Air Force base. The solar systems evaluated included space heating, space cooling, and domestic hot water system. The systems range in size from small two-collector systems to large arrays installed on barracks, mess halls, office buildings, etc. These operational results are presented so that future designs will benefit from the lesson learned in this study.

Acquisition of a Scanning Laser Vibrometer System for Experimental Studies on Nonparametric Nonlinear System Identification and Aeroelastic Instability Suppression

DTIC Science & Technology

2011-03-06

based LCO suppression system housed in a winglet , specifically designed for the GTW. Upon completion of rehabilitation and modifications to the wing to...accommodate the winglet /NES, the full system will be ready for additional testing in the TDT. 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF...University, will result in the design of an NES-based LCO suppression system housed in a winglet , specifically designed for the GTW. Upon completion of

The NMCSSC Quick-Reacting General War Gaming System (QUICK). Analytical Manual. Volume I - Data Base Preparation. Change

DTIC Science & Technology

1972-02-21

is a two-sided strategic nuclear exchange war gaming system. It is designed co assist the military planner in examining various facets of strategic...substantial, the data base preparation process is designed to provide an efficient means of assembling, maintaining, and organizing an input data base to... designed to assist in the study of &’trategic conflicts involving a large-scale Pexchange of nuclear weapons. The system is structured into five

Sustainability of health information systems: a three-country qualitative study in southern Africa.

PubMed

Moucheraud, Corrina; Schwitters, Amee; Boudreaux, Chantelle; Giles, Denise; Kilmarx, Peter H; Ntolo, Ntolo; Bangani, Zwashe; St Louis, Michael E; Bossert, Thomas J

2017-01-10

Health information systems are central to strong health systems. They assist with patient and program management, quality improvement, disease surveillance, and strategic use of information. Many donors have worked to improve health information systems, particularly by supporting the introduction of electronic health information systems (EHIS), which are considered more responsive and more efficient than older, paper-based systems. As many donor-driven programs are increasing their focus on country ownership, sustainability of these investments is a key concern. This analysis explores the potential sustainability of EHIS investments in Malawi, Zambia and Zimbabwe, originally supported by the United States President's Emergency Plan for AIDS Relief (PEPFAR). Using a framework based on sustainability theories from the health systems literature, this analysis employs a qualitative case study methodology to highlight factors that may increase the likelihood that donor-supported initiatives will continue after the original support is modified or ends. Findings highlight commonalities around possible determinants of sustainability. The study found that there is great optimism about the potential for EHIS, but the perceived risks may result in hesitancy to transition completely and parallel use of paper-based systems. Full stakeholder engagement is likely to be crucial for sustainability, as well as integration with other activities within the health system and those funded by development partners. The literature suggests that a sustainable system has clearly-defined goals around which stakeholders can rally, but this has not been achieved in the systems studied. The study also found that technical resource constraints - affecting system usage, maintenance, upgrades and repairs - may limit EHIS sustainability even if these other pillars were addressed. The sustainability of EHIS faces many challenges, which could be addressed through systems' technical design, stakeholder coordination, and the building of organizational capacity to maintain and enhance such systems. All of this requires time and attention, but is likely to enhance long-term outcomes.

Switching sliding mode force tracking control of piezoelectric-hydraulic pump-based friction element actuation systems for automotive transmissions

NASA Astrophysics Data System (ADS)

Kim, Gi-Woo; Wang, K. W.

2009-08-01

In this study, a nonlinear sliding-mode controller is designed for force tracking of a piezoelectric-hydraulic pump (PHP)-based actuation system, which is developed to replace the current electro-hydraulic actuation systems for automatic transmission (AT) friction elements, such as band brakes or clutches. By utilizing the PHP, one can eliminate the various hydraulic components (oil pump, regulating valve and control valve) in current ATs and achieve a simpler configuration with more efficient operation. With the derived governing equation of motion of the PHP-based actuation system integrated with the friction element (band brake), a switching control law is synthesized based on the sliding-mode theory. To evaluate the effectiveness of the proposed control law, its force tracking performance for the engagement of a friction element during an AT 1\\to 2 up-shift is examined experimentally. It is shown that one can successfully track the desired force trajectory for AT shift control with small tracking error. This study demonstrates the potential of the PHP as a new controllable actuation system for AT friction elements.

Outcomes from building system courseware for teaching and testing in a discipline-based human structure curriculum.

PubMed

Reilly, Frank D

2011-01-01

This study investigated the educational benefits of system-based lecture notes and interactive learning objects in a peripheral nervous system component of a traditional first-year medical school human anatomy course. The impetus for the investigation was anecdotal evidence suggesting enhanced learner satisfaction with the learning resources. Retrospective review of existing data from 2006 to 2009 was undertaken to quantify (1) the effects of Web-based system courseware on examination item performance, and (2) differences among learner opinions regarding the benefit level of the five different types of interactive learning objects as evaluated by instructional design questionnaires. Interactive patient-based case studies (IPCS) and review games (Games), simulated interactive patients (SIP), flashcards, and unit quizzes (Quizzes) developed in-house have been peer-reviewed and published in MedEdPORTAL. Statistics included one-way analysis of variance, Tukey's post hoc test, and power meta-analysis (d). Examination item analysis scores remained significantly higher (P ≤ 0.05; d = 0.3938) for learners receiving the instructional treatment incorporating system-based lecture notes and interactive learning objects than for those not receiving this treatment. Using questionnaires with a five-point Likert scale, students reported favorably on the benefit level of all learning objects. They rated the SIP and IPCS significantly higher (P ≤0.05) and games significantly lower (P ≤ 0.05) than in previous years, indicating a change in learner preferences. This study reaffirms that online system-based instructional techniques improve student examination performance and overall student satisfaction. Learners indicated stronger preferences for SIP and IPCS over exercises encouraging passive memorization of anatomical content. Copyright © 2011 American Association of Anatomists.

Studies in knowledge-based diagnosis of failures in robotic assembly

NASA Technical Reports Server (NTRS)

Lam, Raymond K.; Pollard, Nancy S.; Desai, Rajiv S.

1990-01-01

The telerobot diagnostic system (TDS) is a knowledge-based system that is being developed for identification and diagnosis of failures in the space robotic domain. The system is able to isolate the symptoms of the failure, generate failure hypotheses based on these symptoms, and test their validity at various levels by interpreting or simulating the effects of the hypotheses on results of plan execution. The implementation of the TDS is outlined. The classification of failures and the types of system models used by the TDS are discussed. A detailed example of the TDS approach to failure diagnosis is provided.

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned.

PubMed

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, Aids

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting.

Insight into destabilization mechanism of Mg-based hydrides interstitially co-doped with nonmetals: a DFT study

NASA Astrophysics Data System (ADS)

Wu, Zhen; Zhu, Luying; Yang, Fusheng; Zhang, Zaoxiao; Nyamsi, Serge N.

2018-04-01

Mg-based metal hydride is one of the most promising materials for hydrogen energy storage. However, the high thermal stability due to strong bonding effects between the atoms limits its practical application. In order to reduce the thermal stability, a method of doping double nonmetals into Mg-based system was proposed in this study. The density functional theory (DFT) calculation results showed that the thermal stabilities of both the B-N co-doped Mg-based alloy and its hydride are reduced compared with pure Mg-based system. The relative formation enthalpies of the alloy and its hydride are 0.323 and 0.595 eV atom-1, respectively. The values are much higher than those for either singly B- or N-doped Mg-based system. The more significant destabilization by doping double nonmetal elements than single element is mainly attributed to a dual effect in weakening Mg-Ni/NiH4 bonds, caused by criss-cross interactions between B-Ni and N-Mg bonds.

Pilot study of the domestic information display system in state and local government

NASA Technical Reports Server (NTRS)

1982-01-01

An interactive computer based system that can retrieve a wide range of data (demographic, environmental, socio-economic, etc.,) from a large data base and display these data for different geographic units in the form of choropleth maps was developed. The system was designed to display statistical information in a geographic format for national policy makers.

Accuracy and Precision of a Custom Camera-Based System for 2-D and 3-D Motion Tracking during Speech and Nonspeech Motor Tasks

ERIC Educational Resources Information Center

Feng, Yongqiang; Max, Ludo

2014-01-01

Purpose: Studying normal or disordered motor control requires accurate motion tracking of the effectors (e.g., orofacial structures). The cost of electromagnetic, optoelectronic, and ultrasound systems is prohibitive for many laboratories and limits clinical applications. For external movements (lips, jaw), video-based systems may be a viable…

The Effect of Incorporating Good Learners' Ratings in e-Learning Content-Based Recommender System

ERIC Educational Resources Information Center

Ghauth, Khairil Imran; Abdullah, Nor Aniza

2011-01-01

One of the anticipated challenges of today's e-learning is to solve the problem of recommending from a large number of learning materials. In this study, we introduce a novel architecture for an e-learning recommender system. More specifically, this paper comprises the following phases i) to propose an e-learning recommender system based on…

Space-based solar power conversion and delivery systems study. Volume 2: Engineering analysis of orbital systems

NASA Technical Reports Server (NTRS)

1976-01-01

Program plans, schedules, and costs are determined for a synchronous orbit-based power generation and relay system. Requirements for the satellite solar power station (SSPS) and the power relay satellite (PRS) are explored. Engineering analysis of large solar arrays, flight mechanics and control, transportation, assembly and maintenance, and microwave transmission are included.

Celss nutrition system utilizing snails

NASA Astrophysics Data System (ADS)

Midorikawa, Y.; Fujii, T.; Ohira, A.; Nitta, K.

At the 40th IAF Congress in Malaga, a nutrition system for a lunar base CELSS was presented. A lunar base with a total of eight crew members was envisaged. In this paper, four species of plants—rice, soybean, lettuce and strawberry—were introduced to the system. These plants were sufficient to satisfy fundamental nutritional needs of the crew members. The supply of nutrition from plants and the human nutritional requirements could almost be balanced. Our study revealed that the necessary plant cultivation area per crew member would be nearly 40 m 3 in the lunar base. The sources of nutrition considered in the study were energy, sugar, fat, amino acids, inorganic salt and vitamins; however, calcium, vitamin B 2, vitamin A and sodium were found to be lacking. Therefore, a subsystem to supply these elements is of considerable value. In this paper, we report on a study for breeding snails and utilizing meat as food. Nutrients supplied from snails are shown to compensate for the abovementioned lacking elements. We evaluate the snail breeder and the associated food supply system as a subsystem of closed ecological life support system.

Collective-Intelligence Recommender Systems: Advancing Computer Tailoring for Health Behavior Change Into the 21st Century.

PubMed

Sadasivam, Rajani Shankar; Cutrona, Sarah L; Kinney, Rebecca L; Marlin, Benjamin M; Mazor, Kathleen M; Lemon, Stephenie C; Houston, Thomas K

2016-03-07

What is the next frontier for computer-tailored health communication (CTHC) research? In current CTHC systems, study designers who have expertise in behavioral theory and mapping theory into CTHC systems select the variables and develop the rules that specify how the content should be tailored, based on their knowledge of the targeted population, the literature, and health behavior theories. In collective-intelligence recommender systems (hereafter recommender systems) used by Web 2.0 companies (eg, Netflix and Amazon), machine learning algorithms combine user profiles and continuous feedback ratings of content (from themselves and other users) to empirically tailor content. Augmenting current theory-based CTHC with empirical recommender systems could be evaluated as the next frontier for CTHC. The objective of our study was to uncover barriers and challenges to using recommender systems in health promotion. We conducted a focused literature review, interviewed subject experts (n=8), and synthesized the results. We describe (1) limitations of current CTHC systems, (2) advantages of incorporating recommender systems to move CTHC forward, and (3) challenges to incorporating recommender systems into CTHC. Based on the evidence presented, we propose a future research agenda for CTHC systems. We promote discussion of ways to move CTHC into the 21st century by incorporation of recommender systems.

Collective-Intelligence Recommender Systems: Advancing Computer Tailoring for Health Behavior Change Into the 21st Century

PubMed Central

Cutrona, Sarah L; Kinney, Rebecca L; Marlin, Benjamin M; Mazor, Kathleen M; Lemon, Stephenie C; Houston, Thomas K

2016-01-01

Background What is the next frontier for computer-tailored health communication (CTHC) research? In current CTHC systems, study designers who have expertise in behavioral theory and mapping theory into CTHC systems select the variables and develop the rules that specify how the content should be tailored, based on their knowledge of the targeted population, the literature, and health behavior theories. In collective-intelligence recommender systems (hereafter recommender systems) used by Web 2.0 companies (eg, Netflix and Amazon), machine learning algorithms combine user profiles and continuous feedback ratings of content (from themselves and other users) to empirically tailor content. Augmenting current theory-based CTHC with empirical recommender systems could be evaluated as the next frontier for CTHC. Objective The objective of our study was to uncover barriers and challenges to using recommender systems in health promotion. Methods We conducted a focused literature review, interviewed subject experts (n=8), and synthesized the results. Results We describe (1) limitations of current CTHC systems, (2) advantages of incorporating recommender systems to move CTHC forward, and (3) challenges to incorporating recommender systems into CTHC. Based on the evidence presented, we propose a future research agenda for CTHC systems. Conclusions We promote discussion of ways to move CTHC into the 21st century by incorporation of recommender systems. PMID:26952574

Systems theory as a framework for examining a college campus-based support program for the former foster youth.

PubMed

Schelbe, Lisa; Randolph, Karen A; Yelick, Anna; Cheatham, Leah P; Groton, Danielle B

2018-01-01

Increased attention to former foster youth pursuing post-secondary education has resulted in the creation of college campus based support programs to address their need. However, limited empirical evidence and theoretical knowledge exist about these programs. This study seeks to describe the application of systems theory as a framework for examining a college campus based support program for former foster youth. In-depth semi-structured interviews were conducted with 32 program stakeholders including students, mentors, collaborative members, and independent living program staff. Using qualitative data analysis software, holistic coding techniques were employed to analyze interview transcripts. Then applying principles of extended case method using systems theory, data were analyzed. Findings suggest systems theory serves as a framework for understanding the functioning of a college campus based support program. The theory's concepts help delineate program components and roles of stakeholders; outline boundaries between and interactions among stakeholders; and identify program strengths and weakness. Systems theory plays an important role in identifying intervention components and providing a structure through which to identify and understand program elements as a part of the planning process. This study highlights the utility of systems theory as a framework for program planning and evaluation.

Glucose Synthesis in a Protein-Based Artificial Photosynthesis System.

PubMed

Lu, Hao; Yuan, Wenqiao; Zhou, Jack; Chong, Parkson Lee-Gau

2015-09-01

The objective of this study was to understand glucose synthesis of a protein-based artificial photosynthesis system affected by operating conditions, including the concentrations of reactants, reaction temperature, and illumination. Results from non-vesicle-based glyceraldehyde-3-phosphate (GAP) and glucose synthesis showed that the initial concentrations of ribulose-1,5-bisphosphate (RuBP) and adenosine triphosphate (ATP), lighting source, and temperature significantly affected glucose synthesis. Higher initial concentrations of RuBP and ATP significantly enhanced GAP synthesis, which was linearly correlated to glucose synthesis, confirming the proper functions of all catalyzing enzymes in the system. White fluorescent light inhibited artificial photosynthesis and reduced glucose synthesis by 79.2 % compared to in the dark. The reaction temperature of 40 °C was optimum, whereas lower or higher temperature reduced glucose synthesis. Glucose synthesis in the vesicle-based artificial photosynthesis system reconstituted with bacteriorhodopsin, F 0 F 1 ATP synthase, and polydimethylsiloxane-methyloxazoline-polydimethylsiloxane triblock copolymer was successfully demonstrated. This system efficiently utilized light-induced ATP to drive glucose synthesis, and 5.2 μg ml(-1) glucose was synthesized in 0.78-ml reaction buffer in 7 h. Light-dependent reactions were found to be the bottleneck of the studied artificial photosynthesis system.

Feasibility study of direct spectra measurements for Thomson scattered signals for KSTAR fusion-grade plasmas

NASA Astrophysics Data System (ADS)

Park, K.-R.; Kim, K.-h.; Kwak, S.; Svensson, J.; Lee, J.; Ghim, Y.-c.

2017-11-01

Feasibility study of direct spectra measurements of Thomson scattered photons for fusion-grade plasmas is performed based on a forward model of the KSTAR Thomson scattering system. Expected spectra in the forward model are calculated based on Selden function including the relativistic polarization correction. Noise in the signal is modeled with photon noise and Gaussian electrical noise. Electron temperature and density are inferred using Bayesian probability theory. Based on bias error, full width at half maximum and entropy of posterior distributions, spectral measurements are found to be feasible. Comparisons between spectrometer-based and polychromator-based Thomson scattering systems are performed with varying quantum efficiency and electrical noise levels.

Data model for the collaboration between land administration systems and agricultural land parcel identification systems.

PubMed

Inan, Halil Ibrahim; Sagris, Valentina; Devos, Wim; Milenov, Pavel; van Oosterom, Peter; Zevenbergen, Jaap

2010-12-01

The Common Agricultural Policy (CAP) of the European Union (EU) has dramatically changed after 1992, and from then on the CAP focused on the management of direct income subsidies instead of production-based subsidies. For this focus, Member States (MS) are expected to establish Integrated Administration and Control System (IACS), including a Land Parcel Identification System (LPIS) as the spatial part of IACS. Different MS have chosen different solutions for their LPIS. Currently, some MS based their IACS/LPIS on data from their Land Administration Systems (LAS), and many others use purpose built special systems for their IACS/LPIS. The issue with these different IACS/LPIS is that they do not have standardized structures; rather, each represents a unique design in each MS, both in the case of LAS based or special systems. In this study, we aim at designing a core data model for those IACS/LPIS based on LAS. For this purpose, we make use of the ongoing standardization initiatives for LAS (Land Administration Domain Model: LADM) and IACS/LPIS (LPIS Core Model: LCM). The data model we propose in this study implies the collaboration between LADM and LCM and includes some extensions. Some basic issues with the collaboration model are discussed within this study: registration of farmers, land use rights and farming limitations, geometry/topology, temporal data management etc. For further explanation of the model structure, sample instance level diagrams illustrating some typical situations are also included. Copyright © 2010 Elsevier Ltd. All rights reserved.

The analysis on nonlinear control of the aircraft arresting system

NASA Astrophysics Data System (ADS)

Song, Jinchun; Du, Tianrong

2005-12-01

The aircraft arresting system is a complicated nonlinear system. This paper analyzes the mechanical-hydraulic structure of aircraft arresting system composed of electro hydraulic valve and establishes the dynamic equation of the aircraft arresting system. Based on the state-feedback linearization of nonlinear system, a PD-based controller is synthesized. Simulation studies indicate, while arresting the different type aircraft, the proposed controller has fast response, good tracking performance and strong robustness. By tuning the parameters of the PD controller, a satisfactory control performance can be guaranteed.

Characteristics of Behavior of Robots with Emotion Model

NASA Astrophysics Data System (ADS)

Sato, Shigehiko; Nozawa, Akio; Ide, Hideto

Cooperated multi robots system has much dominance in comparison with single robot system. It is able to adapt to various circumstances and has a flexibility for variation of tasks. However it has still problems to control each robot, though methods for control multi robots system have been studied. Recently, the robots have been coming into real scene. And emotion and sensitivity of the robots have been widely studied. In this study, human emotion model based on psychological interaction was adapt to multi robots system to achieve methods for organization of multi robots. The characteristics of behavior of multi robots system achieved through computer simulation were analyzed. As a result, very complexed and interesting behavior was emerged even though it has rather simple configuration. And it has flexiblity in various circumstances. Additional experiment with actual robots will be conducted based on the emotion model.

Small-Signal Dynamic Analysis of LCC-HVDC with STATCOM at the Inverter Busbar

NASA Astrophysics Data System (ADS)

Liu, Dong; Jiang, Wen; Guo, Chunyi; Rehman, Atiq Ur; Zhao, Chengyong

2018-01-01

This paper develops a linearized small-signal dynamic model of a Line-Commutated-Converter based HVDC (LCC-HVDC) system with STATCOM at the inverter busbar, and validates its accuracy by comparing time-domain responses from small-signal model and PSCAD-based simulation results. Considering the potential impact of Phase-Locked-Loop (PLL) parameters on the study system and the close connection of STATCOM and LCC inverter station at AC busbar, this paper investigates the impact of PLL gains and AC voltage control parameters of STATCOM on the system small-signal stability. The studies show that (i) the PLL gain has highly impact on the study system and smaller PLL gains are preferable; (ii) larger values of both the proportional gain and the integral gain of AC voltage controller of STATCOM could result in oscillation/instability of the system.

A cloud-based production system for information and service integration: an internet of things case study on waste electronics

NASA Astrophysics Data System (ADS)

Wang, Xi Vincent; Wang, Lihui

2017-08-01

Cloud computing is the new enabling technology that offers centralised computing, flexible data storage and scalable services. In the manufacturing context, it is possible to utilise the Cloud technology to integrate and provide industrial resources and capabilities in terms of Cloud services. In this paper, a function block-based integration mechanism is developed to connect various types of production resources. A Cloud-based architecture is also deployed to offer a service pool which maintains these resources as production services. The proposed system provides a flexible and integrated information environment for the Cloud-based production system. As a specific type of manufacturing, Waste Electrical and Electronic Equipment (WEEE) remanufacturing experiences difficulties in system integration, information exchange and resource management. In this research, WEEE is selected as the example of Internet of Things to demonstrate how the obstacles and bottlenecks are overcome with the help of Cloud-based informatics approach. In the case studies, the WEEE recycle/recovery capabilities are also integrated and deployed as flexible Cloud services. Supporting mechanisms and technologies are presented and evaluated towards the end of the paper.

A corrosion monitoring system for existing reinforced concrete structures.

DOT National Transportation Integrated Search

2015-05-01

This study evaluated a multi-parameter corrosion monitoring system for existing reinforced concrete structures in chloride-laden service environments. The system was fabricated based on a prototype concrete corrosion measurement system that : had bee...

Feasibility study of a microprocessor based oculometer system

NASA Technical Reports Server (NTRS)

Varanasi, M. R.

1981-01-01

The elimination of redundancy in data to maximize processing speed and minimize storage requirements were objectives in a feasibility study of a microprocessor based oculometer system that would be portable in size and flexible in use. The appropriate architectural design of the signal processor, improved optics, and the reduction of size, weight, and power to the system were investigated. A flow chart is presented showing the strategy of the design. The simulation for developing microroutines for the high speed algorithmic processor subsystem is discussed as well as the Karhunen-Loeve transform technique for data compression.

Bearing-based localization for leader-follower formation control

PubMed Central

Han, Qing; Ren, Shan; Lang, Hao; Zhang, Changliang

2017-01-01

The observability of the leader robot system and the leader-follower formation control are studied. First, the nonlinear observability is studied for when the leader robot observes landmarks. Second, the system is shown to be completely observable when the leader robot observes two different landmarks. When the leader robot system is observable, multi-robots can rapidly form and maintain a formation based on the bearing-only information that the follower robots observe from the leader robot. Finally, simulations confirm the effectiveness of the proposed formation control. PMID:28426706

Electronic structure and microscopic model of V(2)GeO(4)F(2)-a quantum spin system with S = 1.

PubMed

Rahaman, Badiur; Saha-Dasgupta, T

2007-07-25

We present first-principles density functional calculations and downfolding studies of the electronic and magnetic properties of the oxide-fluoride quantum spin system V(2)GeO(4)F(2). We discuss explicitly the nature of the exchange paths and provide quantitative estimates of magnetic exchange couplings. A microscopic modelling based on analysis of the electronic structure of this systems puts it in the interesting class of weakly coupled alternating chain S = 1 systems. Based on the microscopic model, we make inferrences about its spin excitation spectra, which needs to be tested by rigorous experimental study.

Presentation Attack Detection for Iris Recognition System Using NIR Camera Sensor

PubMed Central

Nguyen, Dat Tien; Baek, Na Rae; Pham, Tuyen Danh; Park, Kang Ryoung

2018-01-01

Among biometric recognition systems such as fingerprint, finger-vein, or face, the iris recognition system has proven to be effective for achieving a high recognition accuracy and security level. However, several recent studies have indicated that an iris recognition system can be fooled by using presentation attack images that are recaptured using high-quality printed images or by contact lenses with printed iris patterns. As a result, this potential threat can reduce the security level of an iris recognition system. In this study, we propose a new presentation attack detection (PAD) method for an iris recognition system (iPAD) using a near infrared light (NIR) camera image. To detect presentation attack images, we first localized the iris region of the input iris image using circular edge detection (CED). Based on the result of iris localization, we extracted the image features using deep learning-based and handcrafted-based methods. The input iris images were then classified into real and presentation attack categories using support vector machines (SVM). Through extensive experiments with two public datasets, we show that our proposed method effectively solves the iris recognition presentation attack detection problem and produces detection accuracy superior to previous studies. PMID:29695113

Presentation Attack Detection for Iris Recognition System Using NIR Camera Sensor.

PubMed

Nguyen, Dat Tien; Baek, Na Rae; Pham, Tuyen Danh; Park, Kang Ryoung

2018-04-24

Among biometric recognition systems such as fingerprint, finger-vein, or face, the iris recognition system has proven to be effective for achieving a high recognition accuracy and security level. However, several recent studies have indicated that an iris recognition system can be fooled by using presentation attack images that are recaptured using high-quality printed images or by contact lenses with printed iris patterns. As a result, this potential threat can reduce the security level of an iris recognition system. In this study, we propose a new presentation attack detection (PAD) method for an iris recognition system (iPAD) using a near infrared light (NIR) camera image. To detect presentation attack images, we first localized the iris region of the input iris image using circular edge detection (CED). Based on the result of iris localization, we extracted the image features using deep learning-based and handcrafted-based methods. The input iris images were then classified into real and presentation attack categories using support vector machines (SVM). Through extensive experiments with two public datasets, we show that our proposed method effectively solves the iris recognition presentation attack detection problem and produces detection accuracy superior to previous studies.

Project Based Learning in Multi-Grade Class

ERIC Educational Resources Information Center

Ciftci, Sabahattin; Baykan, Ayse Aysun

2013-01-01

The purpose of this study is to evaluate project based learning in multi-grade classes. This study, based on a student-centered learning approach, aims to analyze students' and parents' interpretations. The study was done in a primary village school belonging to the Centre of Batman, already adapting multi-grade classes in their education system,…

Advanced NSTS propulsion system verification study

NASA Technical Reports Server (NTRS)

Wood, Charles

1989-01-01

The merits of propulsion system development testing are discussed. The existing data base of technical reports and specialists is utilized in this investigation. The study encompassed a review of all available test reports of propulsion system development testing for the Saturn stages, the Titan stages, and the Space Shuttle main propulsion system. The knowledge on propulsion system development and system testing available from specialists and managers was also 'tapped' for inclusion.

Self-Assembled Cubic Liquid Crystalline Nanoparticles for Transdermal Delivery of Paeonol

PubMed Central

Li, Jian-Chun; Zhu, Na; Zhu, Jin-Xiu; Zhang, Wen-Jing; Zhang, Hong-Min; Wang, Qing-Qing; Wu, Xiao-Xiang; Wang, Xiu; Zhang, Jin; Hao, Ji-Fu

2015-01-01

Background The aim of this study was to optimize the preparation method for self-assembled glyceryl monoolein-based cubosomes containing paeonol and to characterize the properties of this transdermal delivery system to improve the drug penetration ability in the skin. Material/Methods In this study, the cubic liquid crystalline nanoparticles loaded with paeonol were prepared by fragmentation of glyceryl monoolein (GMO)/poloxamer 407 bulk cubic gel by high-pressure homogenization. We evaluated the Zeta potential of these promising skin-targeting drug-delivery systems using the Malvern Zeta sizer examination, and various microscopies and differential scanning calorimetry were also used for property investigation. Stimulating studies were evaluated based on the skin irritation reaction score standard and the skin stimulus intensity evaluation standard for paeonol cubosomes when compared with commercial paeonol ointment. In vitro tests were performed on excised rat skins in an improved Franz diffusion apparatus. The amount of paeonol over time in the in vitro penetration and retention experiments both was determined quantitatively by HPLC. Results Stimulating studies were compared with the commercial ointment which indicated that the paeonol cubic liquid crystalline nanoparticles could reduce the irritation in the skin stimulating test. Thus, based on the attractive characteristics of the cubic crystal system of paeonol, we will further exploit the cosmetic features in the future studies. Conclusions The transdermal delivery system of paeonol with low-irritation based on the self-assembled cubic liquid crystalline nanoparticles prepared in this study might be a promising system of good tropical preparation for skin application. PMID:26517086

The Challenge of Cardiovascular Diseases and Diabetes to Public Health: A Study Based on Qualitative Systemic Approach

PubMed Central

Carvalho, Marilia Sá; Coeli, Claudia Medina; Chor, Dóra; Pinheiro, Rejane Sobrino; da Fonseca, Maria de Jesus Mendes; de Sá Carvalho, Luiz Carlos

2015-01-01

The most common modeling approaches to understanding incidence, prevalence and control of chronic diseases in populations, such as statistical regression models, are limited when it comes to dealing with the complexity of those problems. Those complex adaptive systems have characteristics such as emerging properties, self-organization and feedbacks, which structure the system stability and resistance to changes. Recently, system science approaches have been proposed to deal with the range, complexity, and multifactor nature of those public health problems. In this paper we applied a multilevel systemic approach to create an integrated, coherent, and increasingly precise conceptual framework, capable of aggregating different partial or specialized studies, based on the challenges of the Longitudinal Study of Adult Health – ELSA-Brasil. The failure to control blood pressure found in several of the study's subjects was discussed, based on the proposed model, analyzing different loops, time lags, and feedback that influence this outcome in a population with high educational level, with reasonably good health services access. We were able to identify the internal circularities and cycles that generate the system’s resistance to change. We believe that this study can contribute to propose some new possibilities of the research agenda and to the discussion of integrated actions in the field of public health. PMID:26171854

Impact of fiber ring laser configuration on detection capabilities in FBG based sensor systems

NASA Astrophysics Data System (ADS)

Osuch, Tomasz; Kossek, Tomasz; Markowski, Konrad

2014-11-01

In this paper fiber ring lasers (FRL) as interrogation units for distributed fiber Bragg grating (FBG) based sensor networks are studied. In particular, two configurations of the fiber laser with erbium-doped fiber amplifier (EDFA) and semiconductor optical amplifier (SOA) as gain medium were analyzed. In the case of EDFA-based fiber interrogation systems, CW as well as active-mode locking operation were taken into account. The influence of spectral overlapping of FBGs spectra on detection capabilities of examined FRLs are presented. Experimental results show that the SOA-based fiber laser interrogation unit can operate as a multi-parametric sensing system. In turn, using an actively mode-locked fiber ring laser with an EDFA, an electronically switchable FBG based sensing system can be realized.

Identification of sandstone core damage using scanning electron microscopy

NASA Astrophysics Data System (ADS)

Ismail, Abdul Razak; Jaafar, Mohd Zaidi; Sulaiman, Wan Rosli Wan; Ismail, Issham; Shiunn, Ng Yinn

2017-12-01

Particles and fluids invasion into the pore spaces causes serious damage to the formation, resulting reduction in petroleum production. In order to prevent permeability damage for a well effectively, the damage mechanisms should be identified. In this study, water-based drilling fluid was compared to oil-based drilling fluids based on microscopic observation. The cores were damaged by several drilling fluid systems. Scanning electron microscope (SEM) was used to observe the damage mechanism caused by the drilling fluids. Results showed that the ester based drilling fluid system caused the most serious damage followed by synthetic oil based system and KCI-polymer system. Fine solids and filtrate migration and emulsion blockage are believed to be the major mechanisms controlling the changes in flow properties for the sandstone samples.

The Acid-Base Properties and Chemical Composition of the Surface of the InSb-ZnTe System

NASA Astrophysics Data System (ADS)

Kirovskaya, I. A.; Shubenkova, E. G.; Timoshenko, O. T.; Filatova, T. N.

2008-04-01

The acid-base properties and chemical composition of the surface of solid solutions and binary components of the InSb-ZnTe system were studied by the hydrolytic adsorption, nonaqueous conductometric titration, mechanochemistry, IR spectroscopy, and mass spectrometry methods. The strength, nature, and concentration of acid centers were determined. Changes in the concentration of acid centers caused by surface exposure to CO and changes in the composition of the system were also studied. The mechanism of acid-base interactions was established. The chemical composition of the surface of system components exposed to air included adsorbed H2O molecules, OH- groups, hydrocarbon and oxocarbon compounds, and the products of surface atom oxidation. After thermal treatment in a vacuum, the composition of the surface approached the stoichiometric composition.

? observer-based decentralised fuzzy control design for nonlinear interconnected systems: an application to vehicle dynamics

NASA Astrophysics Data System (ADS)

Latrach, Chedia; Kchaou, Mourad; Guéguen, Hervé

2017-05-01

In this study, a decentralised output learning control strategy for a class of nonlinear interconnected systems is studied. Based on Takagi-Sugeno fuzzy (TS) model to approximate the considered interconnected nonlinear systems, a decentralised observer-based control scheme is designed to override the external disturbances such that the ? performance is achieved. The appealing attributes of this approach include: (1) the closed-loop system exhibits a robustness against nonlinear interconnections and external disturbance, (2) by one-step procedure, the gain matrices of observer and controller are obtained on a single step. In simulation results, the controller design is evaluated on the steering stability of a car where the nonlinear model describes the side slip, roll and yaw motions of the automotive vehicle equipped with four-wheel-steering and active suspension.

Characterization and biocompatibility studies of lead free X-ray shielding polymer composite for healthcare application

NASA Astrophysics Data System (ADS)

Singh, Anil Kumar; Singh, Rakesh Kumar; Sharma, Bhupesh; Tyagi, Ajay Kumar

2017-09-01

Lead based X-ray shielding systems are widely being used in healthcare and radiation processing centers to protect technicians, operators and patients from unwanted exposure to ionizing radiation. However, the use of lead is avoided mainly due to its toxic effects on human health and environment, and also discomfort due to heavier in weight. Hence, production of non-toxic, environment friendly, lead-free X-ray shielding system with less weight and good radiation shielding efficiency compared to conventional lead-based shielding systems is a challenging issue and need of the day. The objectives of present study are to develop, characterize and establish synergy of the materials making radiation shielding composition and their biocompatibility without compromising on radiation shielding efficiency and physico-mechanical attributes vis-à-vis lead based systems.

Hierarchical structural health monitoring system combining a fiber optic spinal cord network and distributed nerve cell devices

NASA Astrophysics Data System (ADS)

Minakuchi, Shu; Tsukamoto, Haruka; Takeda, Nobuo

2009-03-01

This study proposes novel hierarchical sensing concept for detecting damages in composite structures. In the hierarchical system, numerous three-dimensionally structured sensor devices are distributed throughout the whole structural area and connected with the optical fiber network through transducing mechanisms. The distributed "sensory nerve cell" devices detect the damage, and the fiber optic "spinal cord" network gathers damage signals and transmits the information to a measuring instrument. This study began by discussing the basic concept of the hierarchical sensing system thorough comparison with existing fiber optic based systems and nerve systems in the animal kingdom. Then, in order to validate the proposed sensing concept, impact damage detection system for the composite structure was proposed. The sensor devices were developed based on Comparative Vacuum Monitoring (CVM) system and the Brillouin based distributed strain sensing was utilized to gather the damage signals from the distributed devices. Finally a verification test was conducted using prototype devices. Occurrence of barely visible impact damage was successfully detected and it was clearly indicated that the hierarchical system has better repairability, higher robustness, and wider monitorable area compared to existing systems utilizing embedded optical fiber sensors.

Simulation of shoreline development in a groyne system, with a case study Sanur Bali beach

NASA Astrophysics Data System (ADS)

Gunawan, P. H.; Pudjaprasetya, S. R.

2018-03-01

The process of shoreline changes due to transport of sediment by littoral drift is studied in this paper. Pelnard-Considère is the commonly adopted model. This model is based on the principle of sediment conservation, without diffraction. In this research, we adopt the Pelnard-Considère equation with diffraction, and a numerical scheme based on the finite volume method is implemented. Shoreline development in a groyne system is then simulated. For a case study, the Sanur Bali Beach, Indonesia is considered, in which from Google Earth photos, the beach experiences changes of coastline caused by sediment trapped in a groyne system.

Translating Addictions Research into Evidence-based Practice: the Polaris CD Outcomes Management System

PubMed Central

Toche-Manley, L.; Grissom, G.; Dietzen, L.; Sangsland, S.

2011-01-01

Converting the findings from addictions studies into information actionable by (non-research) treatment programs is important to improving program outcomes. This paper describes the translation of the findings of studies on Patient-Services matching, prediction of patient response to treatment (Expected Treatment Response) and prediction of dropout to provide evidence-based decision support in routine treatment. The findings of the studies and their application to the development of an outcomes management system are described. Implementation issues in a network of addictions treatment programs are discussed. The work illustrates how outcomes management systems can play an important role in translating research into practice. PMID:21324606

Systems Analysis, Machineable Circulation Data and Library Users and Non-Users.

ERIC Educational Resources Information Center

Lubans, John, Jr.

A study to be made with computer-based circulation data of the non-use and use of a large academic library is discussed. A search of the literature reveals that computer-based circulation systems can be, but have not been, utilized to provide data bases for systematic analyses of library users and resources. The data gathered in the circulation…

A Classification Model and an Open E-Learning System Based on Intuitionistic Fuzzy Sets for Instructional Design Concepts

ERIC Educational Resources Information Center

Güyer, Tolga; Aydogdu, Seyhmus

2016-01-01

This study suggests a classification model and an e-learning system based on this model for all instructional theories, approaches, models, strategies, methods, and technics being used in the process of instructional design that constitutes a direct or indirect resource for educational technology based on the theory of intuitionistic fuzzy sets…

Stress Inoculation through Cognitive and Biofeedback Training

DTIC Science & Technology

2010-12-01

based on Heart Rate Variability ( HRV ) with innovative simulation game-based training tools. The training system described here will be implemented on a...Variability ( HRV ) with innovative simulation game-based training tools. The training system described here will be implemented on a mobile device...and studies (e.g. Fletcher & Tobias, 2006; Thayer, 2009). HRV Coherence Training for Stress Resilience Satisfactory performance in stressful

Assessing Online Textual Feedback to Support Student Intrinsic Motivation Using a Collaborative Text-Based Dialogue System: A Qualitative Study

ERIC Educational Resources Information Center

Shroff, Ronnie H.; Deneen, Christopher

2011-01-01

This paper assesses textual feedback to support student intrinsic motivation using a collaborative text-based dialogue system. A research model is presented based on research into intrinsic motivation, and the specific construct of feedback provides a framework for the model. A qualitative research methodology is used to validate the model.…

Testing Differential Effects of Computer-Based, Web-Based and Paper-Based Administration of Questionnaire Research Instruments

ERIC Educational Resources Information Center

Hardre, Patricia L.; Crowson, H. Michael; Xie, Kui; Ly, Cong

2007-01-01

Translation of questionnaire instruments to digital administration systems, both self-contained and web-based, is widespread and increasing daily. However, the literature is lean on controlled empirical studies investigating the potential for differential effects of administrative methods. In this study, two university student samples were…

Enhancing Information Systems Auditing Knowledge with Role-Playing Game: An Experimental Investigation

ERIC Educational Resources Information Center

Wongpinunwatana, Nitaya

2013-01-01

This study examined the use and effect of a role-playing game on learners' ability in information systems audit. The study is based on experimental research. Information systems control and audit case study and video had been developed. A total of 75 graduate students undertaking a Master's degree in accounting participated in the experiment. The…

REMOVAL AND CONTAINMENT OF LEAD-BASED PAINT VIA NEEDLE SCALERS

EPA Science Inventory

This report describes a comparative technical and economic evaluation of using a dustless needlegun system versus a conventional abrasive grit blasting system in the removal of lead-based paint from steel structures. The objective of the study was to comparatively analyze the ope...

CONCEPTUAL FRAMEWORK FOR THE CHEMICAL EFFECTS IN BIOLOGICAL SYSTEMS (CEBS) TOXICOGENOMICS KNOWLEDGE BASE

EPA Science Inventory

Conceptual Framework for the Chemical Effects in Biological Systems (CEBS) T oxicogenomics Knowledge Base

Abstract
Toxicogenomics studies how the genome is involved in responses to environmental stressors or toxicants. It combines genetics, genome-scale mRNA expressio...

System Thinking Skills at the Elementary School Level

ERIC Educational Resources Information Center

Assaraf, Orit Ben-Zvi; Orion, Nir

2010-01-01

This study deals with the development of system thinking skills at the elementary school level. It addresses the question of whether elementary school students can deal with complex systems. The sample included 40 4th grade students from one school in a small town in Israel. The students studied an inquiry-based earth systems curriculum that…

Study on Safety Monitoring System for Submarine Power Cable on the Basis of AIS and Radar Technology

NASA Astrophysics Data System (ADS)

Jie, Wang; Yao-Tian, Fan

Through analyzing the risks of submarine power cable, the highest risk to damage the cable identified is from ship. Based on concept of Vessel Traffic Management Information Systems, the three core sub-systems of safety monitoring system for submarine power cable were studied and described, also some suggestions were given.

Real-time DNA Amplification and Detection System Based on a CMOS Image Sensor.

PubMed

Wang, Tiantian; Devadhasan, Jasmine Pramila; Lee, Do Young; Kim, Sanghyo

2016-01-01

In the present study, we developed a polypropylene well-integrated complementary metal oxide semiconductor (CMOS) platform to perform the loop mediated isothermal amplification (LAMP) technique for real-time DNA amplification and detection simultaneously. An amplification-coupled detection system directly measures the photon number changes based on the generation of magnesium pyrophosphate and color changes. The photon number decreases during the amplification process. The CMOS image sensor observes the photons and converts into digital units with the aid of an analog-to-digital converter (ADC). In addition, UV-spectral studies, optical color intensity detection, pH analysis, and electrophoresis detection were carried out to prove the efficiency of the CMOS sensor based the LAMP system. Moreover, Clostridium perfringens was utilized as proof-of-concept detection for the new system. We anticipate that this CMOS image sensor-based LAMP method will enable the creation of cost-effective, label-free, optical, real-time and portable molecular diagnostic devices.

Towards collaborative filtering recommender systems for tailored health communications.

PubMed

Marlin, Benjamin M; Adams, Roy J; Sadasivam, Rajani; Houston, Thomas K

2013-01-01

The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient "profiles" and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user's past ratings contributes the most to predictive accuracy.

Towards Collaborative Filtering Recommender Systems for Tailored Health Communications

PubMed Central

Marlin, Benjamin M.; Adams, Roy J.; Sadasivam, Rajani; Houston, Thomas K.

2013-01-01

The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient “profiles” and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user’s past ratings contributes the most to predictive accuracy. PMID:24551430

Development of a web-based epidemiological surveillance system with health system response for improving maternal and newborn health: Field-testing in Thailand.

PubMed

Liabsuetrakul, Tippawan; Prappre, Tagoon; Pairot, Pakamas; Oumudee, Nurlisa; Islam, Monir

2017-06-01

Surveillance systems are yet to be integrated with health information systems for improving the health of pregnant mothers and their newborns, particularly in developing countries. This study aimed to develop a web-based epidemiological surveillance system for maternal and newborn health with integration of action-oriented responses and automatic data analysis with results presentations and to assess the system acceptance by nurses and doctors involved in various hospitals in southern Thailand. Freeware software and scripting languages were used. The system can be run on different platforms, and it is accessible via various electronic devices. Automatic data analysis with results presentations in the forms of graphs, tables and maps was part of the system. A multi-level security system was incorporated into the program. Most doctors and nurses involved in the study felt the system was easy to use and useful. This system can be integrated into country routine reporting system for monitoring maternal and newborn health and survival.

Human life support for advanced space exploration

NASA Technical Reports Server (NTRS)

Schwartzkopf, S. H.

1997-01-01

The requirements for a human life support system for long-duration space missions are reviewed. The system design of a controlled ecological life support system is briefly described, followed by a more detailed account of the study of the conceptual design of a Lunar Based CELSS. The latter is to provide a safe, reliable, recycling lunar base life support system based on a hybrid physicochemical/biological representative technology. The most important conclusion reached by this study is that implementation of a completely recycling CELSS approach for a lunar base is not only feasible, but eminently practical. On a cumulative launch mass basis, a 4-person Lunar Base CELSS would pay for itself in approximately 2.6 years relative to a physicochemical air/water recycling system with resupply of food from the Earth. For crew sizes of 30 and 100, the breakeven point would come even sooner, after 2.1 and 1.7 years, respectively, due to the increased mass savings that can be realized with the larger plant growth units. Two other conclusions are particularly important with regard to the orientation of future research and technology development. First, the mass estimates of the Lunar Base CELSS indicate that a primary design objective in implementing this kind of system must be to minimized the mass and power requirement of the food production plant growth units, which greatly surpass those of the other air and water recycling systems. Consequently, substantial research must be directed at identifying ways to produce food more efficiently. On the other hand, detailed studies to identify the best technology options for the other subsystems should not be expected to produce dramatic reductions in either mass or power requirement of a Lunar Base CELSS. The most crucial evaluation criterion must, therefore, be the capability for functional integration of these technologies into the ultimate design of the system. Secondly, this study illustrates that existing or near-term technologies are adequate to implement a Lunar Base CELSS. There are no apparent "show-stoppers" which require the development of new technologies. However, there are several areas in which new materials and technologies could be used for a more efficient implementation of the system, e.g., by decreasing mass or power requirement and increasing recycling efficiency. These areas must be further addressed through research and development. Finally, although this study focused on the development of a Lunar Base CELSS, the same technologies and a nearly identical design would be appropriate for a Mars base. Actually, except for the distance of transportation, the implementation of a CELSS on Mars would even be easier than it would be on the Moon. The presence of atmospheric CO2 on Mars, although in low concentration, coupled with the fact that the day/night cycle on Mars is very similar to that on Earth, makes the use of light-weight, greenhouse-like structures for growing food plants even more feasible than on the Moon. There are some environmental problems, which would have to be dealt with, like dust storms and the large amount of the ultraviolet radiation incident on the planet's surface. However, the materials and methods are largely available today to develop such a life support system for a Mars base.

Human life support for advanced space exploration.

PubMed

Schwartzkopf, S H

1997-01-01

The requirements for a human life support system for long-duration space missions are reviewed. The system design of a controlled ecological life support system is briefly described, followed by a more detailed account of the study of the conceptual design of a Lunar Based CELSS. The latter is to provide a safe, reliable, recycling lunar base life support system based on a hybrid physicochemical/biological representative technology. The most important conclusion reached by this study is that implementation of a completely recycling CELSS approach for a lunar base is not only feasible, but eminently practical. On a cumulative launch mass basis, a 4-person Lunar Base CELSS would pay for itself in approximately 2.6 years relative to a physicochemical air/water recycling system with resupply of food from the Earth. For crew sizes of 30 and 100, the breakeven point would come even sooner, after 2.1 and 1.7 years, respectively, due to the increased mass savings that can be realized with the larger plant growth units. Two other conclusions are particularly important with regard to the orientation of future research and technology development. First, the mass estimates of the Lunar Base CELSS indicate that a primary design objective in implementing this kind of system must be to minimized the mass and power requirement of the food production plant growth units, which greatly surpass those of the other air and water recycling systems. Consequently, substantial research must be directed at identifying ways to produce food more efficiently. On the other hand, detailed studies to identify the best technology options for the other subsystems should not be expected to produce dramatic reductions in either mass or power requirement of a Lunar Base CELSS. The most crucial evaluation criterion must, therefore, be the capability for functional integration of these technologies into the ultimate design of the system. Secondly, this study illustrates that existing or near-term technologies are adequate to implement a Lunar Base CELSS. There are no apparent "show-stoppers" which require the development of new technologies. However, there are several areas in which new materials and technologies could be used for a more efficient implementation of the system, e.g., by decreasing mass or power requirement and increasing recycling efficiency. These areas must be further addressed through research and development. Finally, although this study focused on the development of a Lunar Base CELSS, the same technologies and a nearly identical design would be appropriate for a Mars base. Actually, except for the distance of transportation, the implementation of a CELSS on Mars would even be easier than it would be on the Moon. The presence of atmospheric CO2 on Mars, although in low concentration, coupled with the fact that the day/night cycle on Mars is very similar to that on Earth, makes the use of light-weight, greenhouse-like structures for growing food plants even more feasible than on the Moon. There are some environmental problems, which would have to be dealt with, like dust storms and the large amount of the ultraviolet radiation incident on the planet's surface. However, the materials and methods are largely available today to develop such a life support system for a Mars base.

Intelligent Robotic Systems Study (IRSS), phase 4

NASA Technical Reports Server (NTRS)

1991-01-01

Under the Intelligent Robotics Systems Study (IRSS), a generalized robotic control architecture was developed for use with the ProtoFlight Manipulator Arm (PFMA). Based upon the NASREM system design concept, the controller built for the PFMA provides localized position based force control, teleoperation, and advanced path recording and playback capabilities. The PFMA has six computer controllable degrees of freedom (DOF) plus a 7th manually indexable DOF, making the manipulator a pseudo 7 DOF mechanism. Joints on the PFMA are driven via 7 pulse width modulated amplifiers. Digital control of the PFMA is implemented using a variety of single board computers. There were two major activities under the IRSS phase 4 study: (1) enhancement of the PFMA control system software functionality; and (2) evaluation of operating modes via a teleoperation performance study. These activities are described and results are given.

A Novel Approach for Enhancement of Automobile Clutch Engagement Quality Using Mechatronics Based Automated Clutch System

NASA Astrophysics Data System (ADS)

Tripathi, K.

2013-01-01

In automated manual clutch (AMC) a mechatronic system controls clutch force trajectory through an actuator governed by a control system. The present study identifies relevant characteristics of this trajectory and their effects on driveline dynamics and engagement quality. A new type of force trajectory is identified which gives the good engagement quality. However this trajectory is not achievable through conventional clutch control mechanism. But in AMC a mechatronic system based on electro-hydraulic or electro-mechanical elements can make it feasible. A mechatronic system is presented in which a mechatronic add-on system can be used to implement the novel force trajectory, without the requirement of replacing the traditional diaphragm spring based clutch in a vehicle with manual transmission.

TF4SM: A Framework for Developing Traceability Solutions in Small Manufacturing Companies

PubMed Central

Bordel Sánchez, Borja; Alcarria, Ramón; Martín, Diego; Robles, Tomás

2015-01-01

Nowadays, manufacturing processes have become highly complex. Besides, more and more, governmental institutions require companies to implement systems to trace a product’s life (especially for foods, clinical materials or similar items). In this paper, we propose a new framework, based on cyber-physical systems, for developing traceability systems in small manufacturing companies (which because of their size cannot implement other commercial products). We propose a general theoretical framework, study the requirements of these companies in relation to traceability systems, propose a reference architecture based on both previous elements and build the first minimum functional prototype, to compare our solution to a traditional tag-based traceability system. Results show that our system reduces the number of inefficiencies and reaction time. PMID:26610509

TF4SM: A Framework for Developing Traceability Solutions in Small Manufacturing Companies.

PubMed

Bordel Sánchez, Borja; Alcarria, Ramón; Martín, Diego; Robles, Tomás

2015-11-20

Nowadays, manufacturing processes have become highly complex. Besides, more and more, governmental institutions require companies to implement systems to trace a product's life (especially for foods, clinical materials or similar items). In this paper, we propose a new framework, based on cyber-physical systems, for developing traceability systems in small manufacturing companies (which because of their size cannot implement other commercial products). We propose a general theoretical framework, study the requirements of these companies in relation to traceability systems, propose a reference architecture based on both previous elements and build the first minimum functional prototype, to compare our solution to a traditional tag-based traceability system. Results show that our system reduces the number of inefficiencies and reaction time.

A Generalized Precharging Strategy for Soft Startup Process of the Modular Multilevel Converter-Based HVDC Systems

DOE PAGES

Zhang, Lei; Qin, Jiangchao; Wu, Xiajie; ...

2017-01-01

The modular multilevel converter (MMC) has become one of the most promising converter technologies for medium/high-power applications, specifically for highvoltage direct current (HVDC) transmission systems. One of the technical challenges associated with the operation and control of the MMC-based system is to precharge the submodule (SM) capacitors to their nominal voltage during the startup process. In this paper, considering various SM circuits, a generalized precharging strategy is proposed for the MMC-based systems, which can implement soft stratup from dc or ac side. Furthermore, the proposed precharging strategy can be applicabe for various SM circuits and MMC configurations. The proposed startupmore » strategy does not require extra measurements and/or auxiliary power supplies. The charging current is controlled by adjusting the changing rate of the number of blocked and bypassed SM capacitors. Based on the proposed startup strategy, the startup processes of MMC/MMC-HVDC systems based on various SM circuits are analyzed and a generalized startup procedure for various MMC-HVDC systems is proposed. In addition, the uncontrollable steady-state SM capacitor voltages of various MMC-based systems are analyzed and determined, potentially useful in SM design. Our performance of the proposed strategy for various MMC-HVDC systems is evaluated based on time-domain simulation studies in the PSCAD/EMTDC software environment and experimental results based on a scaled-down prototype.« less

A Generalized Precharging Strategy for Soft Startup Process of the Modular Multilevel Converter-Based HVDC Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Lei; Qin, Jiangchao; Wu, Xiajie

The modular multilevel converter (MMC) has become one of the most promising converter technologies for medium/high-power applications, specifically for highvoltage direct current (HVDC) transmission systems. One of the technical challenges associated with the operation and control of the MMC-based system is to precharge the submodule (SM) capacitors to their nominal voltage during the startup process. In this paper, considering various SM circuits, a generalized precharging strategy is proposed for the MMC-based systems, which can implement soft stratup from dc or ac side. Furthermore, the proposed precharging strategy can be applicabe for various SM circuits and MMC configurations. The proposed startupmore » strategy does not require extra measurements and/or auxiliary power supplies. The charging current is controlled by adjusting the changing rate of the number of blocked and bypassed SM capacitors. Based on the proposed startup strategy, the startup processes of MMC/MMC-HVDC systems based on various SM circuits are analyzed and a generalized startup procedure for various MMC-HVDC systems is proposed. In addition, the uncontrollable steady-state SM capacitor voltages of various MMC-based systems are analyzed and determined, potentially useful in SM design. Our performance of the proposed strategy for various MMC-HVDC systems is evaluated based on time-domain simulation studies in the PSCAD/EMTDC software environment and experimental results based on a scaled-down prototype.« less

Case Study on the Maintenance of a Construction Monitoring Using USN-Based Data Acquisition

PubMed Central

Kim, Sangyong; Shin, Yoonseok; Kim, Gwang-Hee

2014-01-01

In recent years, there has been an increasing interest in the adoption of emerging ubiquitous sensor network (USN) technologies for instrumentation within a variety of sustainability systems. USN is emerging as a sensing paradigm that is being newly considered by the sustainability management field as an alternative to traditional tethered monitoring systems. Researchers have been discovering that USN is an exciting technology that should not be viewed simply as a substitute for traditional tethered monitoring systems. In this study, we investigate how a movement monitoring measurement system of a complex building is developed as a research environment for USN and related decision-supportive technologies. To address the apparent danger of building movement, agent-mediated communication concepts have been designed to autonomously manage large volumes of exchanged information. In this study, we additionally detail the design of the proposed system, including its principles, data processing algorithms, system architecture, and user interface specifics. Results of the test and case study demonstrate the effectiveness of the USN-based data acquisition system for real-time monitoring of movement operations. PMID:25097890

Case study on the maintenance of a construction monitoring using USN-based data acquisition.

PubMed

Kim, Sangyong; Shin, Yoonseok; Kim, Gwang-Hee

2014-01-01

In recent years, there has been an increasing interest in the adoption of emerging ubiquitous sensor network (USN) technologies for instrumentation within a variety of sustainability systems. USN is emerging as a sensing paradigm that is being newly considered by the sustainability management field as an alternative to traditional tethered monitoring systems. Researchers have been discovering that USN is an exciting technology that should not be viewed simply as a substitute for traditional tethered monitoring systems. In this study, we investigate how a movement monitoring measurement system of a complex building is developed as a research environment for USN and related decision-supportive technologies. To address the apparent danger of building movement, agent-mediated communication concepts have been designed to autonomously manage large volumes of exchanged information. In this study, we additionally detail the design of the proposed system, including its principles, data processing algorithms, system architecture, and user interface specifics. Results of the test and case study demonstrate the effectiveness of the USN-based data acquisition system for real-time monitoring of movement operations.

A methodology based on openEHR archetypes and software agents for developing e-health applications reusing legacy systems.

PubMed

Cardoso de Moraes, João Luís; de Souza, Wanderley Lopes; Pires, Luís Ferreira; do Prado, Antonio Francisco

2016-10-01

In Pervasive Healthcare, novel information and communication technologies are applied to support the provision of health services anywhere, at anytime and to anyone. Since health systems may offer their health records in different electronic formats, the openEHR Foundation prescribes the use of archetypes for describing clinical knowledge in order to achieve semantic interoperability between these systems. Software agents have been applied to simulate human skills in some healthcare procedures. This paper presents a methodology, based on the use of openEHR archetypes and agent technology, which aims to overcome the weaknesses typically found in legacy healthcare systems, thereby adding value to the systems. This methodology was applied in the design of an agent-based system, which was used in a realistic healthcare scenario in which a medical staff meeting to prepare a cardiac surgery has been supported. We conducted experiments with this system in a distributed environment composed by three cardiology clinics and a center of cardiac surgery, all located in the city of Marília (São Paulo, Brazil). We evaluated this system according to the Technology Acceptance Model. The case study confirmed the acceptance of our agent-based system by healthcare professionals and patients, who reacted positively with respect to the usefulness of this system in particular, and with respect to task delegation to software agents in general. The case study also showed that a software agent-based interface and a tools-based alternative must be provided to the end users, which should allow them to perform the tasks themselves or to delegate these tasks to other people. A Pervasive Healthcare model requires efficient and secure information exchange between healthcare providers. The proposed methodology allows designers to build communication systems for the message exchange among heterogeneous healthcare systems, and to shift from systems that rely on informal communication of actors to a more automated and less error-prone agent-based system. Our methodology preserves significant investment of many years in the legacy systems and allows developers to extend them adding new features to these systems, by providing proactive assistance to the end-users and increasing the user mobility with an appropriate support. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Spaceborne computer executive routine functional design specification. Volume 2: Computer executive design for space station/base

NASA Technical Reports Server (NTRS)

Kennedy, J. R.; Fitzpatrick, W. S.

1971-01-01

The computer executive functional system design concepts derived from study of the Space Station/Base are presented. Information Management System hardware configuration as directly influencing the executive design is reviewed. The hardware configuration and generic executive design requirements are considered in detail in a previous report (System Configuration and Executive Requirements Specifications for Reusable Shuttle and Space Station/Base, 9/25/70). This report defines basic system primitives and delineates processes and process control. Supervisor states are considered for describing basic multiprogramming and multiprocessing systems. A high-level computer executive including control of scheduling, allocation of resources, system interactions, and real-time supervisory functions is defined. The description is oriented to provide a baseline for a functional simulation of the computer executive system.

[CRISPR/Cas system for genome editing in pluripotent stem cells].

PubMed

Vasil'eva, E A; Melino, D; Barlev, N A

2015-01-01

Genome editing systems based on site-specific nucleases became very popular for genome editing in modern bioengineering. Human pluripotent stem cells provide a unique platform for genes function study, disease modeling, and drugs testing. Consequently, technology for fast, accurate and well controlled genome manipulation is required. CRISPR/Cas (clustered regularly interspaced short palindromic repeat/CRISPR-associated) system could be employed for these purposes. This system is based on site-specific programmable nuclease Cas9. Numerous advantages of the CRISPR/Cas system and its successful application to human stem cells provide wide opportunities for genome therapy and regeneration medicine. In this publication, we describe and compare the main genome editing systems based on site-specific programmable nucleases and discuss opportunities and perspectives of the CRISPR/Cas system for application to pluripotent stem cells.

Model-Based Testability Assessment and Directed Troubleshooting of Shuttle Wiring Systems

NASA Technical Reports Server (NTRS)

Deb, Somnath; Domagala, Chuck; Shrestha, Roshan; Malepati, Venkatesh; Cavanaugh, Kevin; Patterson-Hine, Ann; Sanderfer, Dwight; Cockrell, Jim; Norvig, Peter (Technical Monitor)

2000-01-01

We have recently completed a pilot study on the Space shuttle wiring system commissioned by the Wiring Integrity Research (WIRe) team at NASA Ames Research Center, As the space shuttle ages, it is experiencing wiring degradation problems including arcing, chaffing insulation breakdown and broken conductors. A systematic and comprehensive test process is required to thoroughly test and quality assure (QA) the wiring systems. The NASA WIRe team recognized the value of a formal model based analysis for risk-assessment and fault coverage analysis. However. wiring systems are complex and involve over 50,000 wire segments. Therefore, NASA commissioned this pilot study with Qualtech Systems. Inc. (QSI) to explore means of automatically extracting high fidelity multi-signal models from wiring information database for use with QSI's Testability Engineering and Maintenance System (TEAMS) tool.

Self-Organization, Resilience and Robustness of Complex Systems Through an Application to Financial Market from an Agent-Based Approach

NASA Astrophysics Data System (ADS)

Lucas, Iris; Cotsaftis, Michel; Bertelle, Cyrille

This paper introduces the implementation of a computational agent-based financial market model in which the system is described on both microscopic and macroscopic levels. This artificial financial market model is used to study the system response when a shock occurs. Indeed, when a market experiences perturbations, financial systems behavior can exhibit two different properties: resilience and robustness. Through simulations and different scenarios of market shocks, these system properties are studied. The results notably show that the emergence of collective herding behavior when market shock occurs leads to a temporary disruption of the system self-organization. Numerical simulations highlight that the market can absorb strong mono-shocks but can also be led to rupture by low but repeated perturbations.