Sample records for based cohesive zone

  1. Linear Elastic and Cohesive Fracture Analysis to Model Hydraulic Fracture in Brittle and Ductile Rocks

    NASA Astrophysics Data System (ADS)

    Yao, Yao

    2012-05-01

    Hydraulic fracturing technology is being widely used within the oil and gas industry for both waste injection and unconventional gas production wells. It is essential to predict the behavior of hydraulic fractures accurately based on understanding the fundamental mechanism(s). The prevailing approach for hydraulic fracture modeling continues to rely on computational methods based on Linear Elastic Fracture Mechanics (LEFM). Generally, these methods give reasonable predictions for hard rock hydraulic fracture processes, but still have inherent limitations, especially when fluid injection is performed in soft rock/sand or other non-conventional formations. These methods typically give very conservative predictions on fracture geometry and inaccurate estimation of required fracture pressure. One of the reasons the LEFM-based methods fail to give accurate predictions for these materials is that the fracture process zone ahead of the crack tip and softening effect should not be neglected in ductile rock fracture analysis. A 3D pore pressure cohesive zone model has been developed and applied to predict hydraulic fracturing under fluid injection. The cohesive zone method is a numerical tool developed to model crack initiation and growth in quasi-brittle materials considering the material softening effect. The pore pressure cohesive zone model has been applied to investigate the hydraulic fracture with different rock properties. The hydraulic fracture predictions of a three-layer water injection case have been compared using the pore pressure cohesive zone model with revised parameters, LEFM-based pseudo 3D model, a Perkins-Kern-Nordgren (PKN) model, and an analytical solution. Based on the size of the fracture process zone and its effect on crack extension in ductile rock, the fundamental mechanical difference of LEFM and cohesive fracture mechanics-based methods is discussed. An effective fracture toughness method has been proposed to consider the fracture process zone effect on the ductile rock fracture.

  2. Investigating Some Technical Issues on Cohesive Zone Modeling of Fracture

    NASA Technical Reports Server (NTRS)

    Wang, John T.

    2011-01-01

    This study investigates some technical issues related to the use of cohesive zone models (CZMs) in modeling fracture processes. These issues include: why cohesive laws of different shapes can produce similar fracture predictions; under what conditions CZM predictions have a high degree of agreement with linear elastic fracture mechanics (LEFM) analysis results; when the shape of cohesive laws becomes important in the fracture predictions; and why the opening profile along the cohesive zone length needs to be accurately predicted. Two cohesive models were used in this study to address these technical issues. They are the linear softening cohesive model and the Dugdale perfectly plastic cohesive model. Each cohesive model constitutes five cohesive laws of different maximum tractions. All cohesive laws have the same cohesive work rate (CWR) which is defined by the area under the traction-separation curve. The effects of the maximum traction on the cohesive zone length and the critical remote applied stress are investigated for both models. For a CZM to predict a fracture load similar to that obtained by an LEFM analysis, the cohesive zone length needs to be much smaller than the crack length, which reflects the small scale yielding condition requirement for LEFM analysis to be valid. For large-scale cohesive zone cases, the predicted critical remote applied stresses depend on the shape of cohesive models used and can significantly deviate from LEFM results. Furthermore, this study also reveals the importance of accurately predicting the cohesive zone profile in determining the critical remote applied load.

  3. A two-field modified Lagrangian formulation for robust simulations of extrinsic cohesive zone models

    NASA Astrophysics Data System (ADS)

    Cazes, F.; Coret, M.; Combescure, A.

    2013-06-01

    This paper presents the robust implementation of a cohesive zone model based on extrinsic cohesive laws (i.e. laws involving an infinite initial stiffness). To this end, a two-field Lagrangian weak formulation in which cohesive tractions are chosen as the field variables along the crack's path is presented. Unfortunately, this formulation cannot model the infinite compliance of the broken elements accurately, and no simple criterion can be defined to determine the loading-unloading change of state at the integration points of the cohesive elements. Therefore, a modified Lagrangian formulation using a fictitious cohesive traction instead of the classical cohesive traction as the field variable is proposed. Thanks to this change of variable, the cohesive law becomes an increasing function of the equivalent displacement jump, which eliminates the problems mentioned previously. The ability of the proposed formulations to simulate fracture accurately and without field oscillations is investigated through three numerical test examples.

  4. Relating Cohesive Zone Model to Linear Elastic Fracture Mechanics

    NASA Technical Reports Server (NTRS)

    Wang, John T.

    2010-01-01

    The conditions required for a cohesive zone model (CZM) to predict a failure load of a cracked structure similar to that obtained by a linear elastic fracture mechanics (LEFM) analysis are investigated in this paper. This study clarifies why many different phenomenological cohesive laws can produce similar fracture predictions. Analytical results for five cohesive zone models are obtained, using five different cohesive laws that have the same cohesive work rate (CWR-area under the traction-separation curve) but different maximum tractions. The effect of the maximum traction on the predicted cohesive zone length and the remote applied load at fracture is presented. Similar to the small scale yielding condition for an LEFM analysis to be valid. the cohesive zone length also needs to be much smaller than the crack length. This is a necessary condition for a CZM to obtain a fracture prediction equivalent to an LEFM result.

  5. Molecular-dynamics Simulation-based Cohesive Zone Representation of Intergranular Fracture Processes in Aluminum

    NASA Technical Reports Server (NTRS)

    Yamakov, Vesselin I.; Saether, Erik; Phillips, Dawn R.; Glaessgen, Edward H.

    2006-01-01

    A traction-displacement relationship that may be embedded into a cohesive zone model for microscale problems of intergranular fracture is extracted from atomistic molecular-dynamics simulations. A molecular-dynamics model for crack propagation under steady-state conditions is developed to analyze intergranular fracture along a flat 99 [1 1 0] symmetric tilt grain boundary in aluminum. Under hydrostatic tensile load, the simulation reveals asymmetric crack propagation in the two opposite directions along the grain boundary. In one direction, the crack propagates in a brittle manner by cleavage with very little or no dislocation emission, and in the other direction, the propagation is ductile through the mechanism of deformation twinning. This behavior is consistent with the Rice criterion for cleavage vs. dislocation blunting transition at the crack tip. The preference for twinning to dislocation slip is in agreement with the predictions of the Tadmor and Hai criterion. A comparison with finite element calculations shows that while the stress field around the brittle crack tip follows the expected elastic solution for the given boundary conditions of the model, the stress field around the twinning crack tip has a strong plastic contribution. Through the definition of a Cohesive-Zone-Volume-Element an atomistic analog to a continuum cohesive zone model element - the results from the molecular-dynamics simulation are recast to obtain an average continuum traction-displacement relationship to represent cohesive zone interaction along a characteristic length of the grain boundary interface for the cases of ductile and brittle decohesion. Keywords: Crack-tip plasticity; Cohesive zone model; Grain boundary decohesion; Intergranular fracture; Molecular-dynamics simulation

  6. Atomistic Cohesive Zone Models for Interface Decohesion in Metals

    NASA Technical Reports Server (NTRS)

    Yamakov, Vesselin I.; Saether, Erik; Glaessgen, Edward H.

    2009-01-01

    Using a statistical mechanics approach, a cohesive-zone law in the form of a traction-displacement constitutive relationship characterizing the load transfer across the plane of a growing edge crack is extracted from atomistic simulations for use within a continuum finite element model. The methodology for the atomistic derivation of a cohesive-zone law is presented. This procedure can be implemented to build cohesive-zone finite element models for simulating fracture in nanocrystalline or ultrafine grained materials.

  7. Modeling and simulation of the debonding process of composite solid propellants

    NASA Astrophysics Data System (ADS)

    Feng, Tao; Xu, Jin-sheng; Han, Long; Chen, Xiong

    2017-07-01

    In order to study the damage evolution law of composite solid propellants, the molecular dynamics particle filled algorithm was used to establish the mesoscopic structure model of HTPB(Hydroxyl-terminated polybutadiene) propellants. The cohesive element method was employed for the adhesion interface between AP(Ammonium perchlorate) particle and HTPB matrix and the bilinear cohesive zone model was used to describe the mechanical response of the interface elements. The inversion analysis method based on Hooke-Jeeves optimization algorithm was employed to identify the parameters of cohesive zone model(CZM) of the particle/binder interface. Then, the optimized parameters were applied to the commercial finite element software ABAQUS to simulate the damage evolution process for AP particle and HTPB matrix, including the initiation, development, gathering and macroscopic crack. Finally, the stress-strain simulation curve was compared with the experiment curves. The result shows that the bilinear cohesive zone model can accurately describe the debonding and fracture process between the AP particles and HTPB matrix under the uniaxial tension loading.

  8. Two-scale modeling of joining of the aluminum alloys by a cohesive zone element technique

    NASA Astrophysics Data System (ADS)

    Zuo, Yinan; Wulfinghoff, Stephan; Reese, Stefanie

    2016-10-01

    The roll bonding of aluminum sheets is numerically investigated. In the first part of the paper, a cohesive zone element formulation in the framework of zero-thickness interface elements is developed. Based on a traction-separation law, this enables the modeling of bonding and debonding on both macroscale and microscale. Simulations on microscale are done to show the mechanism of bonding and the influence of different factors on the bonding strength.

  9. Transient Interaction Between Reduction and Slagging Reactions of Wustite in Simulated Cohesive Zone of Blast Furnace

    NASA Astrophysics Data System (ADS)

    Ma, Kaihui; Xu, Jian; Deng, Junyi; Wang, Dongdong; Xu, Yang; Liao, Zhehan; Sun, Chengfeng; Zhang, Shengfu; Wen, Liangying

    2018-06-01

    The blast furnace cohesive zone plays an important role in the gas flow distribution and heat-transfer efficiency. Previous work mainly employed temperature-based indices to evaluate and predict the shape and thickness of the cohesive zone, whereas the internal reactions and related effects on the softening and melting properties of a complex burden are ignored. In this study, an innovative index, namely, shrinkage rate (SR), is first proposed to directly estimate the shrinkage behavior of wustite (FeO)-packed bed inside a simulated cohesive zone. The index is applied as the temperature increases to elucidate the transient interaction between reduction and slagging reactions. Results show that the thermally induced slagging reaction causes the packed bed to shrink at lower temperature, and the SR doubles when compounds with low melting temperature are generated by adding a reasonable concentration of CaO or SiO2. The reduction reaction becomes the driving force during the shrinkage of the packed bed between 1173 K and 1273 K when CO is introduced in the mixture gas. Then, the dominating factors for further shrinkage include slagging, reduction, or both factors. These factors vary with respect to the added compounds or temperature.

  10. A Method for Combining Experimentation and Molecular Dynamics Simulation to Improve Cohesive Zone Models for Metallic Microstructures

    NASA Technical Reports Server (NTRS)

    Hochhalter, J. D.; Glaessgen, E. H.; Ingraffea, A. R.; Aquino, W. A.

    2009-01-01

    Fracture processes within a material begin at the nanometer length scale at which the formation, propagation, and interaction of fundamental damage mechanisms occur. Physics-based modeling of these atomic processes quickly becomes computationally intractable as the system size increases. Thus, a multiscale modeling method, based on the aggregation of fundamental damage processes occurring at the nanoscale within a cohesive zone model, is under development and will enable computationally feasible and physically meaningful microscale fracture simulation in polycrystalline metals. This method employs atomistic simulation to provide an optimization loop with an initial prediction of a cohesive zone model (CZM). This initial CZM is then applied at the crack front region within a finite element model. The optimization procedure iterates upon the CZM until the finite element model acceptably reproduces the near-crack-front displacement fields obtained from experimental observation. With this approach, a comparison can be made between the original CZM predicted by atomistic simulation and the converged CZM that is based on experimental observation. Comparison of the two CZMs gives insight into how atomistic simulation scales.

  11. Simulation of anisotropic fracture behaviour of polycrystalline round blank tungsten using cohesive zone model

    NASA Astrophysics Data System (ADS)

    Mahler, Michael; Gaganidze, Ermile; Aktaa, Jarir

    2018-04-01

    The experimental observation of anisotropic fracture behaviour of round blank polycrystalline tungsten was simulated using finite element (FE) method in combination with cohesive zone model. Experiments in the past had shown that due to the anisotropic microstructure the fracture toughness varies by factor of about two for different orientations. The reason is the crack propagation direction, which is - in some orientations - not the typical crack propagation direction for mode I fracture. In some directions the crack is not growing perpendicular to the crack opening tensile load. Nevertheless, in the present paper, the microstructure is modelled by FE mesh including cohesive zone elements which mimic grain boundaries (GB). This is based on the assumption that GB's are the weakest links in the structure. The use of the correct parameters to describe the fracture process allows the description of the observed experimental orientation dependent fracture toughness.

  12. Fracture of a composite reinforced by unidirectional fibers

    NASA Astrophysics Data System (ADS)

    Hasanov, F. F.

    2014-11-01

    An elastic medium weakened by a periodic system of circular holes filled with homogeneous elastic fibers whose surface is coated with a homogeneous film is considered. A fracture model for a medium with a periodic structure is proposed, which is based on an analysis of the fracture zone near the crack tip. It is assumed that the fracture zone is a layer of finite length containing a material with partially broken bonds between separate structural elements (end zone). The fracture zone is considered as part of the crack. The bonds between crack faces in the end zone are modeled by applying the cohesive forces caused by the presence of bonds to the crack surface. An analysis of the limit equilibrium of shear cracks in the end zone of the model is performed on the basis of a nonlocal fracture criterion together with a force condition for the motion of crack tip and a deformation condition for determining the motion of faces of end-zone cracks. In the analysis, relationships between the cohesive forces and the shear of crack faces are established, the stress state near the crack is assessed with account of external loading, cohesive forces, and fiber arrangement, and the critical external loads as functions of geometric parameters of the composite are determined.

  13. New Developments in the Embedded Statistical Coupling Method: Atomistic/Continuum Crack Propagation

    NASA Technical Reports Server (NTRS)

    Saether, E.; Yamakov, V.; Glaessgen, E.

    2008-01-01

    A concurrent multiscale modeling methodology that embeds a molecular dynamics (MD) region within a finite element (FEM) domain has been enhanced. The concurrent MD-FEM coupling methodology uses statistical averaging of the deformation of the atomistic MD domain to provide interface displacement boundary conditions to the surrounding continuum FEM region, which, in turn, generates interface reaction forces that are applied as piecewise constant traction boundary conditions to the MD domain. The enhancement is based on the addition of molecular dynamics-based cohesive zone model (CZM) elements near the MD-FEM interface. The CZM elements are a continuum interpretation of the traction-displacement relationships taken from MD simulations using Cohesive Zone Volume Elements (CZVE). The addition of CZM elements to the concurrent MD-FEM analysis provides a consistent set of atomistically-based cohesive properties within the finite element region near the growing crack. Another set of CZVEs are then used to extract revised CZM relationships from the enhanced embedded statistical coupling method (ESCM) simulation of an edge crack under uniaxial loading.

  14. Investigation of translaminar fracture in fibrereinforced composite laminates---applicability of linear elastic fracture mechanics and cohesive-zone model

    NASA Astrophysics Data System (ADS)

    Hou, Fang

    With the extensive application of fiber-reinforced composite laminates in industry, research on the fracture mechanisms of this type of materials have drawn more and more attentions. A variety of fracture theories and models have been developed. Among them, the linear elastic fracture mechanics (LEFM) and cohesive-zone model (CZM) are two widely-accepted fracture models, which have already shown applicability in the fracture analysis of fiber-reinforced composite laminates. However, there remain challenges which prevent further applications of the two fracture models, such as the experimental measurement of fracture resistance. This dissertation primarily focused on the study of the applicability of LEFM and CZM for the fracture analysis of translaminar fracture in fibre-reinforced composite laminates. The research for each fracture model consisted of two sections: the analytical characterization of crack-tip fields and the experimental measurement of fracture resistance parameters. In the study of LEFM, an experimental investigation based on full-field crack-tip displacement measurements was carried out as a way to characterize the subcritical and steady-state crack advances in translaminar fracture of fiber-reinforced composite laminates. Here, the fiber-reinforced composite laminates were approximated as anisotropic solids. The experimental investigation relied on the LEFM theory with a modification with respect to the material anisotropy. Firstly, the full-field crack-tip displacement fields were measured by Digital Image Correlation (DIC). Then two methods, separately based on the stress intensity approach and the energy approach, were developed to measure the crack-tip field parameters from crack-tip displacement fields. The studied crack-tip field parameters included the stress intensity factor, energy release rate and effective crack length. Moreover, the crack-growth resistance curves (R-curves) were constructed with the measured crack-tip field parameters. In addition, an error analysis was carried out with an emphasis on the influence of out-of-plane rotation of specimen. In the study of CZM, two analytical inverse methods, namely the field projection method (FPM) and the separable nonlinear least-squares method, were developed for the extraction of cohesive fracture properties from crack-tip full-field displacements. Firstly, analytical characterizations of the elastic fields around a crack-tip cohesive zone and the cohesive variables within the cohesive zone were derived in terms of an eigenfunction expansion. Then both of the inverse methods were developed based on the analytical characterization. With the analytical inverse methods, the cohesive-zone law (CZL), cohesive-zone size and position can be inversely computed from the cohesive-crack-tip displacement fields. In the study, comprehensive numerical tests were carried out to investigate the applicability and robustness of two inverse methods. From the numerical tests, it was found that the field projection method was very sensitive to noise and thus had limited applicability in practice. On the other hand, the separable nonlinear least-squares method was found to be more noise-resistant and less ill-conditioned. Subsequently, the applicability of separable nonlinear least-squares method was validated with the same translaminar fracture experiment for the study of LEFM. Eventually, it was found that the experimental measurements of R-curves and CZL showed a great agreement, in both of the fracture energy and the predicted load carrying capability. It thus demonstrated the validity of present research for the translaminar fracture of fiber-reinforced composite laminates.

  15. Sub-10-micrometer toughening and crack tip toughness of dental enamel.

    PubMed

    Ang, Siang Fung; Schulz, Anja; Pacher Fernandes, Rodrigo; Schneider, Gerold A

    2011-04-01

    In previous studies, enamel showed indications to occlude small cracks in-vivo and exhibited R-curve behaviors for bigger cracks ex-vivo. This study quantifies the crack tip's toughness (K(I0),K(III0)), the crack's closure stress and the cohesive zone size at the crack tip of enamel and investigates the toughening mechanisms near the crack tip down to the length scale of a single enamel crystallite. The crack-opening-displacement (COD) profile of cracks induced by Vickers indents on mature bovine enamel was studied using atomic force microscopy (AFM). The mode I crack tip toughness K(I0) of cracks along enamel rod boundaries and across enamel rods exhibit a similar range of values: K(I0,Ir)=0.5-1.6MPa m(0.5) (based on Irwin's 'near-field' solution) and K(I0,cz)=0.8-1.5MPa m(0.5) (based on the cohesive zone solution of the Dugdale-Muskhelishvili (DM) crack model). The mode III crack tip toughness K(III0,Ir) was computed as 0.02-0.15MPa m(0.5). The crack-closure stress at the crack tip was computed as 163-770 MPa with a cohesive zone length and width 1.6-10.1μm and 24-44 nm utilizing the cohesive zone solution. Toughening elements were observed under AFM and SEM: crack bridging due to protein ligament and hydroxyapatite fibres (micro- and nanometer scale) as well as microcracks were identified. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

  16. A thermodynamic analysis of propagating subcritical cracks with cohesive zones

    NASA Technical Reports Server (NTRS)

    Allen, David H.

    1993-01-01

    The results of the so-called energetic approach to fracture with particular attention to the issue of energy dissipation due to crack propagation are applied to the case of a crack with cohesive zone. The thermodynamic admissibility of subcritical crack growth (SCG) is discussed together with some hypotheses that lead to the derivation of SCG laws. A two-phase cohesive zone model for discontinuous crack growth is presented and its thermodynamics analyzed, followed by an example of its possible application.

  17. Bedform development and morphodynamics in mixed cohesive sediment substrates: the importance of winnowing and flocculation

    NASA Astrophysics Data System (ADS)

    Ye, Leiping; Parsons, Daniel; Manning, Andrew

    2016-04-01

    There remains a lack of process-based knowledge of sediment dynamics within flows over bedforms generated in complex mixtures of cohesionless sand and biologically-active cohesive muds in natural estuarine flow systems. The work to be presented forms a part of the UK NERC "COHesive BEDforms (COHBED)" project which aims to fill this gap in knowledge. Herein results from a field survey in sub-tidal zone of Dee estuary (NW, England) and a set of large-scale laboratory experiments, conducted using mixtures of non-cohesive sands, cohesive muds and Xanthan gum (as a proxy for the biological stickiness of Extracellular Polymeric Substances (EPS)) will be presented. The results indicate the significance of biological-active cohesive sediments in controlling winnowing rates and flocculation dynamics, which contributes significantly to rates of bedform evolution.

  18. On the identification of cohesive parameters for printed metal-polymer interfaces

    NASA Astrophysics Data System (ADS)

    Heinrich, Felix; Langner, Hauke H.; Lammering, Rolf

    2017-05-01

    The mechanical behavior of printed electronics on fiber reinforced composites is investigated. A methodology based on cohesive zone models is employed, considering interfacial strengths, stiffnesses and critical strain energy release rates. A double cantilever beam test and an end notched flexure test are carried out to experimentally determine critical strain energy release rates under fracture modes I and II. Numerical simulations are performed in Abaqus 6.13 to model both tests. Applying the simulations, an inverse parameter identification is run to determine the full set of cohesive parameters.

  19. Slow Growth of a Crack with Contacting Faces in a Viscoelastic Body

    NASA Astrophysics Data System (ADS)

    Selivanov, M. F.

    2017-11-01

    An algorithm for solving the problem of slow growth of a mode I crack with a zone of partial contact of the faces is proposed. The algorithm is based on a crack model with a cohesive zone, an iterative method of finding a solution for the elastic opening displacement, and elasto-viscoelastic analogy, which makes it possible to describe the time-dependent opening displacement in Boltzmann-Volterra form. A deformation criterion with a constant critical opening displacement and cohesive strength during quasistatic crack growth is used. The algorithm was numerically illustrated for tensile loading at infinity and two concentrated forces symmetric about the crack line that cause the crack faces to contact. When the crack propagates, the contact zone disappears and its dynamic growth begins.

  20. A Cohesive Zone Approach for Fatigue-Driven Delamination Analysis in Composite Materials

    NASA Astrophysics Data System (ADS)

    Amiri-Rad, Ahmad; Mashayekhi, Mohammad

    2017-08-01

    A new model for prediction of fatigue-driven delamination in laminated composites is proposed using cohesive interface elements. The presented model provides a link between cohesive elements damage evolution rate and crack growth rate of Paris law. This is beneficial since no additional material parameters are required and the well-known Paris law constants are used. The link between the cohesive zone method and fracture mechanics is achieved without use of effective length which has led to more accurate results. The problem of unknown failure path in calculation of the energy release rate is solved by imposing a condition on the damage model which leads to completely vertical failure path. A global measure of energy release rate is used for the whole cohesive zone which is computationally more efficient compared to previous similar models. The performance of the proposed model is investigated by simulation of well-known delamination tests and comparison against experimental data of the literature.

  1. Cohesive detachment of an elastic pillar from a dissimilar substrate

    NASA Astrophysics Data System (ADS)

    Fleck, N. A.; Khaderi, S. N.; McMeeking, R. M.; Arzt, E.

    The adhesion of micron-scale surfaces due to intermolecular interactions is a subject of intense interest spanning electronics, biomechanics and the application of soft materials to engineering devices. The degree of adhesion is sensitive to the diameter of micro-pillars in addition to the degree of elastic mismatch between pillar and substrate. Adhesion-strength-controlled detachment of an elastic circular cylinder from a dissimilar substrate is predicted using a Dugdale-type of analysis, with a cohesive zone of uniform tensile strength emanating from the interface corner. Detachment initiates when the opening of the cohesive zone attains a critical value, giving way to crack formation. When the cohesive zone size at crack initiation is small compared to the pillar diameter, the initiation of detachment can be expressed in terms of a critical value Hc of the corner stress intensity. The estimated pull-off force is somewhat sensitive to the choice of stick/slip boundary condition used on the cohesive zone, especially when the substrate material is much stiffer than the pillar material. The analysis can be used to predict the sensitivity of detachment force to the size of pillar and to the degree of elastic mismatch between pillar and substrate.

  2. Simulating Matrix Crack and Delamination Interaction in a Clamped Tapered Beam

    NASA Technical Reports Server (NTRS)

    De Carvalho, N. V.; Seshadri, B. R.; Ratcliffe, J. G.; Mabson, G. E.; Deobald, L. R.

    2017-01-01

    Blind predictions were conducted to validate a discrete crack methodology based on the Floating Node Method to simulate matrix-crack/delamination interaction. The main novel aspects of the approach are: (1) the implementation of the floating node method via an 'extended interface element' to represent delaminations, matrix-cracks and their interaction, (2) application of directional cohesive elements to infer overall delamination direction, and (3) use of delamination direction and stress state at the delamination front to determine migration onset. Overall, good agreement was obtained between simulations and experiments. However, the validation exercise revealed the strong dependence of the simulation of matrix-crack/delamination interaction on the strength data (in this case transverse interlaminar strength, YT) used within the cohesive zone approach applied in this work. This strength value, YT, is itself dependent on the test geometry from which the strength measurement is taken. Thus, choosing an appropriate strength value becomes an ad-hoc step. As a consequence, further work is needed to adequately characterize and assess the accuracy and adequacy of cohesive zone approaches to model small crack growth and crack onset. Additionally, often when simulating damage progression with cohesive zone elements, the strength is lowered while keeping the fracture toughness constant to enable the use of coarser meshes. Results from the present study suggest that this approach is not recommended for any problem involving crack initiation, small crack growth or multiple crack interaction.

  3. Multiscale Modeling of Grain-Boundary Fracture: Cohesive Zone Models Parameterized From Atomistic Simulations

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Saether, Erik; Phillips, Dawn R.; Yamakov, Vesselin

    2006-01-01

    A multiscale modeling strategy is developed to study grain boundary fracture in polycrystalline aluminum. Atomistic simulation is used to model fundamental nanoscale deformation and fracture mechanisms and to develop a constitutive relationship for separation along a grain boundary interface. The nanoscale constitutive relationship is then parameterized within a cohesive zone model to represent variations in grain boundary properties. These variations arise from the presence of vacancies, intersticies, and other defects in addition to deviations in grain boundary angle from the baseline configuration considered in the molecular dynamics simulation. The parameterized cohesive zone models are then used to model grain boundaries within finite element analyses of aluminum polycrystals.

  4. Structural characteristics of cohesive flow deposits, and a sedimentological approach on their flow mechanisms.

    NASA Astrophysics Data System (ADS)

    Tripsanas, E. K.; Bryant, W. R.; Prior, D. B.

    2003-04-01

    A large number of Jumbo Piston cores (up to 20 m long), acquired from the continental slope and rise of the Northwest Gulf of Mexico (Bryant Canyon area and eastern Sigsbee Escarpment), have recovered various mass-transport deposits. The main cause of slope instabilities over these areas is oversteepening of the slopes due to the seaward mobilization of the underlying allochthonous salt masses. Cohesive flow deposits were the most common recoveries in the sediment cores. Four types of cohesive flow deposits have been recognized: a) fluid debris flow, b) mud flow, c) mud-matrix dominated debris flow, and d) clast-dominated debris flow deposits. The first type is characterized by its relatively small thickness (less than 1 m), a mud matrix with small (less than 0.5 cm) and soft mud-clasts, and a faint layering. The mud-clasts reveal a normal grading and become more abundant towards the base of each layer. That reveals that their deposition resulted by several successive surges/pulses, developed in the main flow, than the sudden “freezing” of the whole flow. The main difference between mud flow and mud-matrix dominated debris flow deposits is the presence of small to large mud-clasts in the later. Both deposits consist of a chaotic mud-matrix, and a basal shear laminated zone, where the strongest shearing of the flow was exhibited. Convolute laminations, fault-like surfaces, thrust faults, and microfaults are interpreted as occurring during the “freezing” of the flows and/or by adjustments of the rested deposits. Clast-dominated debris flow deposits consist of three zones: a) an upper plug-zone, characterized by large interlocked clasts, b) a mid-zone, of higher reworked, inversely graded clasts, floating in a mud-matrix, and c) a lower shear laminated zone. The structure of the last three cohesive flow deposits indicate that they represent deposition of typical Bingham flows, consisting of an upper plug-zone in which the yield stress is not exceeded and an underlain shearing zone, where the shear stress exceeded the yield strength of the sediments. Mud-matrix, and clast-dominated debris flow deposits are the pervasive ones. Intensely sheared thin layers (5- to 20 cm) with sharp bases, displayed as successive layers at the base of mud/debris flow deposits, or as isolated depositional units interbedded in hemipelagic sediments, are as interesting, as enigmatic. They are interpreted as basal self-lubricating layers, of having high shear stress and pore pressures, over which the mud/debris flows were able to travel for very long distances.

  5. Penny-shaped crack propagation in spallation of Zr-BMGs

    NASA Astrophysics Data System (ADS)

    Ling, Z.; Huang, X.; Dai, L. H.

    2015-09-01

    Typical penny-shaped microcracks at their propagating in spallation of Zr-based bulk metallic glass (Zr-BMG) samples were captured by a specially designed plate impact technique. Based on the morphology and stress environment of the microcrack, a damaged zone or propagation zone around the crack tips, similar to the cohesive zone in classical fracture theories, is applied. Especially the scale of such a damaged zone represents a scale of the crack propagation. Its fast propagation would quickly bring a longer crack or cause cracks coalesce to form another longer one. The estimated propagation scales of microcracks are reasonable compared with what occurred in the Zr-BMG samples.

  6. Multiscale Modeling of Intergranular Fracture in Aluminum: Constitutive Relation For Interface Debonding

    NASA Technical Reports Server (NTRS)

    Yamakov, V.; Saether, E.; Glaessgen, E. H.

    2008-01-01

    Intergranular fracture is a dominant mode of failure in ultrafine grained materials. In the present study, the atomistic mechanisms of grain-boundary debonding during intergranular fracture in aluminum are modeled using a coupled molecular dynamics finite element simulation. Using a statistical mechanics approach, a cohesive-zone law in the form of a traction-displacement constitutive relationship, characterizing the load transfer across the plane of a growing edge crack, is extracted from atomistic simulations and then recast in a form suitable for inclusion within a continuum finite element model. The cohesive-zone law derived by the presented technique is free of finite size effects and is statistically representative for describing the interfacial debonding of a grain boundary (GB) interface examined at atomic length scales. By incorporating the cohesive-zone law in cohesive-zone finite elements, the debonding of a GB interface can be simulated in a coupled continuum-atomistic model, in which a crack starts in the continuum environment, smoothly penetrates the continuum-atomistic interface, and continues its propagation in the atomistic environment. This study is a step towards relating atomistically derived decohesion laws to macroscopic predictions of fracture and constructing multiscale models for nanocrystalline and ultrafine grained materials.

  7. Cohesive fracture of elastically heterogeneous materials: An integrative modeling and experimental study

    NASA Astrophysics Data System (ADS)

    Wang, Neng; Xia, Shuman

    2017-01-01

    A combined modeling and experimental effort is made in this work to examine the cohesive fracture mechanisms of heterogeneous elastic solids. A two-phase laminated composite, which mimics the key microstructural features of many tough engineering and biological materials, is selected as a model material system. Theoretical and finite element analyses with cohesive zone modeling are performed to study the effective fracture resistance of the heterogeneous material associated with unstable crack propagation and arrest. A crack-tip-position controlled algorithm is implemented in the finite element analysis to overcome the inherent instability issues resulting from crack pinning and depinning at local heterogeneities. Systematic parametric studies are carried out to investigate the effects of various material and geometrical parameters, including the modulus mismatch ratio, phase volume fraction, cohesive zone size, and cohesive law shape. Concurrently, a novel stereolithography-based three-dimensional (3D) printing system is developed and used for fabricating heterogeneous test specimens with well-controlled structural and material properties. Fracture testing of the specimens is performed using the tapered double-cantilever beam (TDCB) test method. With optimal material and geometrical parameters, heterogeneous TDCB specimens are shown to exhibit enhanced effective fracture energy and effective fracture toughness than their homogeneous counterparts, which is in good agreement with the modeling predictions. The integrative computational and experimental study presented here provides a fundamental mechanistic understanding of the fracture mechanisms in brittle heterogeneous materials and sheds light on the rational design of tough materials through patterned heterogeneities.

  8. The role of bio-physical cohesive substrates on sediment winnowing and bedform development

    NASA Astrophysics Data System (ADS)

    Ye, Leiping; Parsons, Daniel; Manning, Andrew

    2017-04-01

    Existing sediment transport and bedform size predictions for natural open-channel flows in many environments are seriously impeded by a lack of process-based knowledge concerning the dynamics of complex bed sediment mixtures comprising cohesionless sand and biologically-active cohesive muds. A series of flume experiments (14 experimental runs) with different substrate mixtures of sand-clay-EPS (Extracellular Polymeric Substance) are combined with a detailed estuarine field survey (Dee estuary, NW England) to investigate the development of bedform morphologies and characteristics of suspended sediment over bio-physical cohesive substrates. The experimental results indicate that winnowing and sediment sorting can occur pervasively in bio-physical cohesive sediment - flow systems. Importantly however, the evolution of the bed and bedform dynamics, and hence turbulence production, is significantly reduced as bed substrate cohesivity increases. The estuarine subtidal zone survey also revealed that the bio-physical cohesion provided by both the clay and microorganism fractions in the bed plays a significant role in controlling the interactions between bed substrate and sediment suspension, deposition and bedform generation. The work will be presented here concludes by outlining the need to extend and revisit the effects of cohesivity in morphodynamic systems and the sets of parameters presently used in numerical modelling, particularly in the context of the impact of climate change on estuarine and coastal systems.

  9. Free flowing and cohesive powders agitation in a cylindrical convective blender- kinetics experiments and Markov chain modelling

    NASA Astrophysics Data System (ADS)

    Legoix, Léonard; Milhé, Mathieu; Gatumel, Cendrine; Berthiaux, Henri

    2017-06-01

    An original methodology for studying powder flow in a cylindrical convective blender has been developed. A free-flowing and a cohesive powder were studied, at a fixed stirring speed, in rolling regime. For both powders, three apparent flow mechanisms were evidenced: convection in the volume swept by the blades, diffusion/shearing between the agitated zone and the stagnant one, as well as in the stagnant zone itself, and avalanches at the powder bed surface between agitated and stagnant zones. After defining six zones in the blender, tracing experiments were carried out by placing appropriate tracers in different starting zones and sampling the whole bed at different stirring times, which lead to mixing kinetics of the powders into themselves. A Markov chains model of the blender allowed the quantification of the three mechanisms respective magnitude by fitting the experimental data. This simple model has a good agreement with the free-flowing powder data, but is not able to represent well the observations for the cohesive powder. Bed consolidation should probably be taken into account for this kind of powders and thus a linear Markov model is not sufficient.

  10. Challenges in Modelling of Lightning-Induced Delamination; Effect of Temperature-Dependent Interfacial Properties

    NASA Technical Reports Server (NTRS)

    Naghipour, P.; Pineda, E. J.; Arnold, S.

    2014-01-01

    Lightning is a major cause of damage in laminated composite aerospace structures during flight. Due to the dielectric nature of Carbon fiber reinforced polymers (CFRPs), the high energy induced by lightning strike transforms into extreme, localized surface temperature accompanied with a high-pressure shockwave resulting in extensive damage. It is crucial to develop a numerical tool capable of predicting the damage induced from a lightning strike to supplement extremely expensive lightning experiments. Delamination is one of the most significant failure modes resulting from a lightning strike. It can be extended well beyond the visible damage zone, and requires sophisticated techniques and equipment to detect. A popular technique used to model delamination is the cohesive zone approach. Since the loading induced from a lightning strike event is assumed to consist of extreme localized heating, the cohesive zone formulation should additionally account for temperature effects. However, the sensitivity to this dependency remains unknown. Therefore, the major focus point of this work is to investigate the importance of this dependency via defining various temperature dependency profiles for the cohesive zone properties, and analyzing the corresponding delamination area. Thus, a detailed numerical model consisting of multidirectional composite plies with temperature-dependent cohesive elements in between is subjected to lightning (excessive amount of heat and pressure) and delamination/damage expansion is studied under specified conditions.

  11. An Engineering Solution for Solving Mesh Size Effects in the Simulation of Delamination with Cohesive Zone Models

    NASA Technical Reports Server (NTRS)

    Turon, A.; Davila, C. G.; Camanho, P. P.; Costa, J.

    2007-01-01

    This paper presents a methodology to determine the parameters to be used in the constitutive equations of Cohesive Zone Models employed in the simulation of delamination in composite materials by means of decohesion finite elements. A closed-form expression is developed to define the stiffness of the cohesive layer. A novel procedure that allows the use of coarser meshes of decohesion elements in large-scale computations is also proposed. The procedure ensures that the energy dissipated by the fracture process is computed correctly. It is shown that coarse-meshed models defined using the approach proposed here yield the same results as the models with finer meshes normally used for the simulation of fracture processes.

  12. Modeling of sheet metal fracture via cohesive zone model and application to spot welds

    NASA Astrophysics Data System (ADS)

    Wu, Joseph Z.

    Even though the cohesive zone model (CZM) has been widely used to analyze ductile fracture, it is not yet clearly understood how to calibrate the cohesive parameters including the specific work of separation (the work of separation per unit crack area) and the peak stress. A systematic approach is presented to first determine the cohesive values for sheet metal and then apply the calibrated model to various structure problems including the failure of spot welds. Al5754-0 was chosen for this study since it is not sensitive to heat treatment so the effect of heat-affected-zone (HAZ) can be ignored. The CZM has been applied to successfully model both mode-I and mode-III fracture for various geometries including Kahn specimens, single-notch specimens, and deep double-notch specimens for mode-I and trouser specimens for mode-III. The mode-I fracture of coach-peel spot-weld nugget and the mixed-mode fracture of nugget pull-out have also been well simulated by the CZM. Using the mode-I average specific work of separation of 13 kJ/m2 identified in a previous work and the mode-III specific work of separation of 38 kJ/m 2 found in this thesis, the cohesive peak stress has been determined to range from 285 MPa to 600 MPa for mode-I and from 165 MPa to 280 MPa for mode-III, depending on the degree of plastic deformation. The uncertainty of these cohesive values has also been examined. It is concluded that, if the specific work of separation is a material constant, the peak stress changes with the degree of plastic deformation and is therefore geometry-dependent.

  13. Evolution of fault zones in carbonates with mechanical stratigraphy - Insights from scale models using layered cohesive powder

    NASA Astrophysics Data System (ADS)

    van Gent, Heijn W.; Holland, Marc; Urai, Janos L.; Loosveld, Ramon

    2010-09-01

    We present analogue models of the formation of dilatant normal faults and fractures in carbonate fault zones, using cohesive hemihydrate powder (CaSO 4·½H 2O). The evolution of these dilatant fault zones involves a range of processes such as fragmentation, gravity-driven breccia transport and the formation of dilatant jogs. To allow scaling to natural prototypes, extensive material characterisation was done. This showed that tensile strength and cohesion depend on the state of compaction, whereas the friction angle remains approximately constant. In our models, tensile strength of the hemihydrate increases with depth from 9 to 50 Pa, while cohesion increases from 40 to 250 Pa. We studied homogeneous and layered material sequences, using sand as a relatively weak layer and hemihydrate/graphite mixtures as a slightly stronger layer. Deformation was analyzed by time-lapse photography and Particle Image Velocimetry (PIV) to calculate the evolution of the displacement field. With PIV the initial, predominantly elastic deformation and progressive localization of deformation are observed in detail. We observed near-vertical opening-mode fractures near the surface. With increasing depth, dilational shear faults were dominant, with releasing jogs forming at fault-dip variations. A transition to non-dilatant shear faults was observed near the bottom of the model. In models with mechanical stratigraphy, fault zones are more complex. The inferred stress states and strengths in different parts of the model agree with the observed transitions in the mode of deformation.

  14. Cohesive zone model for direct silicon wafer bonding

    NASA Astrophysics Data System (ADS)

    Kubair, D. V.; Spearing, S. M.

    2007-05-01

    Direct silicon wafer bonding and decohesion are simulated using a spectral scheme in conjunction with a rate-dependent cohesive model. The cohesive model is derived assuming the presence of a thin continuum liquid layer at the interface. Cohesive tractions due to the presence of a liquid meniscus always tend to reduce the separation distance between the wafers, thereby opposing debonding, while assisting the bonding process. In the absence of the rate-dependence effects the energy needed to bond a pair of wafers is equal to that needed to separate them. When rate-dependence is considered in the cohesive law, the experimentally observed asymmetry in the energetics can be explained. The derived cohesive model has the potential to form a bridge between experiments and a multiscale-modelling approach to understand the mechanics of wafer bonding.

  15. Time dependent fracture and cohesive zones

    NASA Technical Reports Server (NTRS)

    Knauss, W. G.

    1993-01-01

    This presentation is concerned with the fracture response of materials which develop cohesive or bridging zones at crack tips. Of special interest are concerns regarding crack stability as a function of the law which governs the interrelation between the displacement(s) or strain across these zones and the corresponding holding tractions. It is found that for some materials unstable crack growth can occur, even before the crack tip has experienced a critical COD or strain across the crack, while for others a critical COD will guarantee the onset of fracture. Also shown are results for a rate dependent nonlinear material model for the region inside of a craze for exploring time dependent crack propagation of rate sensitive materials.

  16. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Park, Kyoungsoo, E-mail: kpark16@illinois.ed; Paulino, Glaucio H.; Roesler, Jeffery

    A simple, effective, and practical constitutive model for cohesive fracture of fiber reinforced concrete is proposed by differentiating the aggregate bridging zone and the fiber bridging zone. The aggregate bridging zone is related to the total fracture energy of plain concrete, while the fiber bridging zone is associated with the difference between the total fracture energy of fiber reinforced concrete and the total fracture energy of plain concrete. The cohesive fracture model is defined by experimental fracture parameters, which are obtained through three-point bending and split tensile tests. As expected, the model describes fracture behavior of plain concrete beams. Inmore » addition, it predicts the fracture behavior of either fiber reinforced concrete beams or a combination of plain and fiber reinforced concrete functionally layered in a single beam specimen. The validated model is also applied to investigate continuously, functionally graded fiber reinforced concrete composites.« less

  17. Cohesive zone length of metagabbro at supershear rupture velocity

    NASA Astrophysics Data System (ADS)

    Fukuyama, Eiichi; Xu, Shiqing; Yamashita, Futoshi; Mizoguchi, Kazuo

    2016-10-01

    We investigated the shear strain field ahead of a supershear rupture. The strain array data along the sliding fault surfaces were obtained during the large-scale biaxial friction experiments at the National Research Institute for Earth Science and Disaster Resilience. These friction experiments were done using a pair of meter-scale metagabbro rock specimens whose simulated fault area was 1.5 m × 0.1 m. A 2.6-MPa normal stress was applied with loading velocity of 0.1 mm/s. Near-fault strain was measured by 32 two-component semiconductor strain gauges installed at an interval of 50 mm and 10 mm off the fault and recorded at an interval of 1 MHz. Many stick-slip events were observed in the experiments. We chose ten unilateral rupture events that propagated with supershear rupture velocity without preceding foreshocks. Focusing on the rupture front, stress concentration was observed and sharp stress drop occurred immediately inside the ruptured area. The temporal variation of strain array data is converted to the spatial variation of strain assuming a constant rupture velocity. We picked up the peak strain and zero-crossing strain locations to measure the cohesive zone length. By compiling the stick-slip event data, the cohesive zone length is about 50 mm although it scattered among the events. We could not see any systematic variation at the location but some dependence on the rupture velocity. The cohesive zone length decreases as the rupture velocity increases, especially larger than √{2} times the shear wave velocity. This feature is consistent with the theoretical prediction.

  18. Crustal strength anisotropy influences landscape form and longevity

    NASA Astrophysics Data System (ADS)

    Roy, S. G.; Koons, P. O.; Upton, P.; Tucker, G. E.

    2013-12-01

    Lithospheric deformation is increasingly recognized as integral to landscape evolution. Here we employ a coupled orogenic and landscape model to test the hypothesis that strain-induced crustal failure exerts the dominant control on rates and patterns of orogenic landscape evolution. We assume that erodibility is inversely proportional to cohesion for bedrock rivers host to bedload abrasion. Crustal failure can potentially reduce cohesion by several orders of magnitude along meter scale planar fault zones. The strain-induced cohesion field is generated by use of a strain softening upper crustal rheology in our orogenic model. Based on the results of our coupled model, we predict that topographic anisotropy found in natural orogens is largely a consequence of strain-induced anisotropy in the near surface strength field. The lifespan and geometry of mountain ranges are strongly sensitive to 1) the acute division in erodibility values between the damaged fault zones and the surrounding intact rock and 2) the fault zone orientations for a given tectonic regime. The large division in erodibility between damaged and intact rock combined with the dependence on fault zone orientation provides a spectrum of rates at which a landscape will respond to tectonic or climatic perturbations. Knickpoint migration is about an order of magnitude faster along the exposed cores of fault zones when compared to rates in intact rock, and migration rate increases with fault dip. The contrast in relative erosion rate confines much of the early stage fluvial erosion and establishes a major drainage network that reflects the orientations of exposed fault zones. Slower erosion into the surrounding intact rock typically creates small tributaries that link orthogonally to the structurally confined channels. The large divide in fluvial erosion rate permits the long term persistence of the tectonic signal in the landscape and partly contributes to orogen longevity. Landscape morphology and channel tortuosity together provide critical information on the orientation and spatial distribution of fault damage and the relevant tectonic regime. Our landscape evolution models express similar mechanisms and produce drainage network patterns analogous to those seen in the Southern Alps of New Zealand and the Himalayan Eastern Syntaxis, both centers of active lithospheric deformation.

  19. A simple cohesive zone model that generates a mode-mixity dependent toughness

    DOE PAGES

    Reedy, Jr., E. D.; Emery, J. M.

    2014-07-24

    A simple, mode-mixity dependent toughness cohesive zone model (MDG c CZM) is described. This phenomenological cohesive zone model has two elements. Mode I energy dissipation is defined by a traction–separation relationship that depends only on normal separation. Mode II (III) dissipation is generated by shear yielding and slip in the cohesive surface elements that lie in front of the region where mode I separation (softening) occurs. The nature of predictions made by analyses that use the MDG c CZM is illustrated by considering the classic problem of an elastic layer loaded by rigid grips. This geometry, which models a thinmore » adhesive bond with a long interfacial edge crack, is similar to that which has been used to measure the dependence of interfacial toughness on crack-tip mode-mixity. The calculated effective toughness vs. applied mode-mixity relationships all display a strong dependence on applied mode-mixity with the effective toughness increasing rapidly with the magnitude of the mode-mixity. The calculated relationships also show a pronounced asymmetry with respect to the applied mode-mixity. As a result, this dependence is similar to that observed experimentally, and calculated results for a glass/epoxy interface are in good agreement with published data that was generated using a test specimen of the same type as analyzed here.« less

  20. A Predictive Model for Chemically-Induced Fracture

    NASA Astrophysics Data System (ADS)

    Carter, Emily

    2004-03-01

    Mechanical properties of bulk solids are affected not only by macroscopic external loads, but also by chemical reactions, typically at surfaces and interfaces. For example, impurities in metals often coalesce at grain boundaries, leading to weakening of the sample under stress. Atmospheric corrosion is another example that, when combined with external loads, leads to stress-corrosion cracking. These are inherently multiscale phenomena, where the chemistry occurring at the atomic scale profoundly affects the mechanical properties at the micron to millimeter scale. Here we discuss a multiscale model of environmentally-assisted fracture. This involves coupling periodic density functional theory (DFT) at the atomic scale to a finite element continuum mechanics description of the coarser scale. A key component is the cohesive law, which we have shown takes on a universal form distinct from the generally used UBER model. Further, we propose a scheme to calculate physically realistic cohesive laws in the presence of mobile impurities. This cohesive law is then used to in a continuum model that couples stress-assisted diffusion with cohesive zone models of fracture to describe hydrogen embrittlement in metals. We show that this model, with a first principles-based cohesive law, provides insight into the observed intermittent cracking in steel, as well as good quantitative agreement with experiment.

  1. Geometrical and Structural Asperities on Fault Surfaces

    NASA Astrophysics Data System (ADS)

    Sagy, A.; Brodsky, E. E.; van der Elst, N.; Agosta, F.; di Toro, G.; Collettini, C.

    2007-12-01

    Earthquake dynamics are strongly affected by fault zone structure and geometry. Fault surface irregularities and the nearby structure control the rupture nucleation and propagation, the fault strength, the near-field stress orientations and the hydraulic properties. New field observations demonstrate the existence of asperities in faults as displayed by topographical bumps on the fault surface and hardening of the internal structure near them. Ground-based LIDAR measurements on more than 30 normal and strike slip faults in different lithologies demonstrate that faults are not planar surfaces and roughness is strongly dependent on fault displacement. In addition to the well-understood roughness exemplified by abrasive striations and fracture segmentation, we found semi-elliptical topographical bumps with wavelengths of a few meters. In many faults the bumps are not spread equally on the surface and zones can be bumpier than others. The bumps are most easily identified on faults with total displacement of dozens to hundreds of meters. Smaller scale roughness on these faults is smoothed by abrasive processes. A key site in southern Oregon shows that the topographic bumps are closely tied to the internal structure of the fault zone. At this location, we combine LiDAR data with detailed structural analysis of the fault zone embedded in volcanic rocks. Here the bumps correlate with an abrupt change in the width of the cohesive cataclasite layer that is exposed under a thin ultracataclasite zone. In most of the exposures the cohesive layer thickness is 10-20 cm. However, under protruding bumps the layer is always thickened and the width can locally exceed one meter. Field and microscopic analyses show that the layer contains grains with dimensions ranging from less than 10 μ up to a few centimeters. There is clear evidence of internal flow, rotation and fracturing of the grains in the layer. X-Ray diffraction measurements of samples from the layer show that the bulk mineralogy is identical to that of the host rock, although thin section analysis suggests that some alteration and secondary mineralization of the grains also occurs. We infer that the cohesiveness of the layer is a consequence of repacking and cementation similar to deformation bands in granular material. By comparing the thickness of the cohesive layer on several secondary faults in this fault area we found that the average thickness of the layer increases with total slip. The correlation is nonlinear and the thickening rate decreases with increasing slip. We conclude that granular flow decreasing with increasing slip and thus the deformation is continually localized.

  2. Decohesion models informed by first-principles calculations: The ab initio tensile test

    NASA Astrophysics Data System (ADS)

    Enrique, Raúl A.; Van der Ven, Anton

    2017-10-01

    Extreme deformation and homogeneous fracture can be readily studied via ab initio methods by subjecting crystals to numerical "tensile tests", where the energy of locally stable crystal configurations corresponding to elongated and fractured states are evaluated by means of density functional method calculations. The information obtained can then be used to construct traction curves of cohesive zone models in order to address fracture at the macroscopic scale. In this work, we perform an in depth analysis of traction curves and how ab initio calculations must be interpreted to rigorously parameterize an atomic scale cohesive zone model, using crystalline Ag as an example. Our analysis of traction curves reveal the existence of two qualitatively distinct decohesion criteria: (i) an energy criterion whereby the released elastic energy equals the energy cost of creating two new surfaces and (ii) an instability criterion that occurs at a higher and size independent stress than that of the energy criterion. We find that increasing the size of the simulation cell renders parts of the traction curve inaccessible to ab initio calculations involving the uniform decohesion of the crystal. We also find that the separation distance below which a crack heals is not a material parameter as has been proposed in the past. Finally, we show that a large energy barrier separates the uniformly stressed crystal from the decohered crystal, resolving a paradox predicted by a scaling law based on the energy criterion that implies that large crystals will decohere under vanishingly small stresses. This work clarifies confusion in the literature as to how a cohesive zone model is to be parameterized with ab initio "tensile tests" in the presence of internal relaxations.

  3. Investigation of Possible Wellbore Cement Failures During Hydraulic Fracturing Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Jihoon; Moridis, George

    2014-11-01

    We model and assess the possibility of shear failure, using the Mohr-Coulomb model ? along the vertical well by employing a rigorous coupled flow-geomechanic analysis. To this end, we vary the values of cohesion between the well casing and the surrounding cement to representing different quality levels of the cementing operation (low cohesion corresponds to low-quality cement and/or incomplete cementing). The simulation results show that there is very little fracturing when the cement is of high quality.. Conversely, incomplete cementing and/or weak cement can causes significant shear failure and the evolution of long fractures/cracks along the vertical well. Specifically, lowmore » cohesion between the well and cemented areas can cause significant shear failure along the well, but the same cohesion as the cemented zone does not cause shear failure. When the hydraulic fracturing pressure is high, low cohesion of the cement can causes fast propagation of shear failure and of the resulting fracture/crack, but a high-quality cement with no weak zones exhibits limited shear failure that is concentrated near the bottom of the vertical part of the well. Thus, high-quality cement and complete cementing along the vertical well appears to be the strongest protection against shear failure of the wellbore cement and, consequently, against contamination hazards to drinking water aquifers during hydraulic fracturing operations.« less

  4. The role of microstructure on deformation and damage mechanisms in a Nickel-based superalloy at elevated temperatures

    NASA Astrophysics Data System (ADS)

    Maciejewski, Kimberly E.

    The overall objective of this research work is the development and implementation of a mechanistic based time-dependent crack growth model which considers the role of creep, fatigue and environment interactions on both the bulk and the grain boundary phase in ME3 disk material. The model is established by considering a moving crack tip along a grain boundary path in which damage events are described in terms of the grain boundary deformation and related accommodation processes. Modeling of these events was achieved by adapting a cohesive zone approach (an interface with internal singular surfaces) in which the grain boundary dislocation network is smeared into a Newtonian fluid element. The deformation behavior of this element is controlled by the continuum in both far field (internal state variable model) and near field (crystal plasticity model) and the intrinsic grain boundary viscosity which is characterized by microstructural parameters, including grain boundary precipitates and morphology, and is able to define the mobility of the element by scaling the motion of dislocations into a mesoscopic scale. Within the cohesive zone element, the motion of gliding dislocations in the tangential direction relates to the observed grain boundary sliding displacement, the rate of which is limited by the climb of dislocations over grain boundary obstacles. Effects of microstructural variation and orientation of the surrounding continuum are embedded in the tangential stress developing in the grain boundary. The mobility of the element in the tangential direction (i.e. by grain boundary sliding) characterizes the accumulation of irreversible displacement while the vertical movement (migration), although present, is assumed to alter stress by relaxation and, thus, is not considered a contributing factor in the damage process. This process is controlled by the rate at which the time-dependent sliding reaches a critical displacement and as such, a damage criterion is introduced by considering the mobility limit in the tangential direction leading to strain incompatibility and failure. This limit is diminished by environmental effects which are introduced as a dynamic embrittlement process that hinders grain boundary mobility due to oxygen diffusion. The concepts described herein indicate that implementation of the cohesive zone model requires the knowledge of the grain boundary external and internal deformation fields. The external field is generated by developing and coupling two continuum constitutive models including (i) a microstructure-explicit coarse scale crystal plasticity model with strength provided by tertiary and secondary gamma' precipitates. This scale is appropriate for the representation of the continuum region at the immediate crack tip, and (ii) a macroscopic internal state variable model for the purpose of modeling the response of the far field region located several grains away from the crack path. The hardening contributions of the gamma' precipitates consider dislocation/precipitate interactions in terms of gamma' particles shearing and/or Orowan by-passing mechanisms. The material parameters for these models are obtained from results of low cycle fatigue tests which were performed at three temperatures; 650, 704 and 760°C. Furthermore, a series of microstructure controlled experiments were carried out in order to develop and validate the microstructure dependency feature of the continuum constitutive models. The second requirement in the implementation of the cohesive zone model is a grain boundary deformation model which has been developed, as described above, on the basis of viscous flow rules of the boundary material. This model is supported by dwell crack growth experiments carried out at the three temperatures mentioned above, in both air and vacuum environments. Results of these tests have identified the frequency range in which the grain boundary cohesive zone model is applicable and also provided data to calculate the grain boundary activation energy as well as identifying the relative contributions of creep and environment in the critical sliding displacement leading to failure. Validation of the cohesive zone model has been carried out by comparing the simulated crack growth data with that obtained experimentally. This comparison is used to optimize the different model components and to provide a route to assess the relative significance of each of these components in relation to the intergranular damage associated with dwell fatigue crack growth in the ME3 alloy. For this purpose, a set of case studies were performed in order to illustrate the sensitivity of the cohesive zone model to variations in microstructure parameters (gamma ' statistics and grain boundary morphology) examined within the range of temperatures utilized in this study.

  5. Application of the cohesive zone model for the evaluation of stiffness losses in a rotor with a transverse breathing crack

    NASA Astrophysics Data System (ADS)

    Toni Liong, Rugerri; Proppe, Carsten

    2013-04-01

    The breathing mechanism of a transversely cracked rotor and its influence on a rotor system that appears due to shaft weight and inertia forces is studied. A method is proposed for the evaluation of the stiffness losses in the cross-section that contains the crack. This method is based on a cohesive zone model (CZM) instead of linear elastic fracture mechanics (LEFM). The CZM is developed for mode-I plane strain conditions and accounts explicitly for triaxiality of the stress state by using constitutive relations. The breathing crack is modelled by a parabolic shape. As long as the relative crack depth is small, a crack closure straight line model may be used, while the crack closure parabolic line should be used in the case of a deep crack. The CZM is also implemented in a one-dimensional continuum rotor model by means of finite element (FE) discretisation in order to predict and to analyse the dynamic behavior of a cracked rotor. The proposed method provides a useful tool for the analysis of rotor systems containing cracks.

  6. A numerical insight into elastomer normally closed micro valve actuation with cohesive interfacial cracking modelling

    NASA Astrophysics Data System (ADS)

    Wang, Dongyang; Ba, Dechun; Hao, Ming; Duan, Qihui; Liu, Kun; Mei, Qi

    2018-05-01

    Pneumatic NC (normally closed) valves are widely used in high density microfluidics systems. To improve actuation reliability, the actuation pressure needs to be reduced. In this work, we utilize 3D FEM (finite element method) modelling to get an insight into the valve actuation process numerically. Specifically, the progressive debonding process at the elastomer interface is simulated with CZM (cohesive zone model) method. To minimize the actuation pressure, the V-shape design has been investigated and compared with a normal straight design. The geometrical effects of valve shape has been elaborated, in terms of valve actuation pressure. Based on our simulated results, we formulate the main concerns for micro valve design and fabrication, which is significant for minimizing actuation pressures and ensuring reliable operation.

  7. Cohesive zone modelling of wafer bonding and fracture: effect of patterning and toughness variations

    NASA Astrophysics Data System (ADS)

    Kubair, D. V.; Spearing, S. M.

    2006-03-01

    Direct wafer bonding has increasingly become popular in the manufacture of microelectromechanical systems and semiconductor microelectronics components. The success of the bonding process is controlled by variables such as wafer flatness and surface preparation. In order to understand the effects of these variables, spontaneous planar crack propagation simulations were performed using the spectral scheme in conjunction with a cohesive zone model. The fracture-toughness on the bond interface is varied to simulate the effect of surface roughness (nanotopography) and patterning. Our analysis indicated that the energetics of crack propagation is sensitive to the local surface property variations. The patterned wafers are tougher (well bonded) than the unpatterned ones of the same average fracture-toughness.

  8. The effect of coarse gravel on cohesive sediment entrapment in an annular flume

    NASA Astrophysics Data System (ADS)

    Glasbergen, K.; Stone, M.; Krishnappan, B.; Dixon, J.; Silins, U.

    2015-03-01

    While cohesive sediment generally represents a small fraction (<0.5%) of the total sediment mass stored in gravel-bed rivers, it can strongly influence physical and biogeochemical processes in the hyporheic zone and alter aquatic habitat. This research was conducted to examine mechanisms governing the interaction of cohesive sediments with gravel beds in the Elbow River, Alberta, Canada. A series of erosion and deposition experiments with and without a gravel bed were conducted in a 5-m diameter annular flume. The critical shear stress for deposition and erosion of cohesive sediment without gravel was 0.115 Pa and 0.212 Pa, respectively. In experiments with a gravel bed, cohesive sediment moved from the water column into the gravel bed via the coupling of surface and pore water flow. Once in the gravel bed, cohesive sediments were not mobilized under the maximum applied shear stresses (1.11 Pa) used in the experiment. The gravel bed had an entrapment coefficient (ratio between the entrapment flux and the settling flux) of 0.2. Accordingly, when flow conditions are sufficient to produce a shear stress that will mobilize the armour layer of the gravel bed (>16 Pa), cohesive materials trapped within the gravel bed will be entrained and transported into the Glenmore Reservoir, where sediment-associated nutrients may pose treatment challenges to the drinking water supply.

  9. Inelastic off-fault response and three-dimensional dynamics of earthquake rupture on a strike-slip fault

    USGS Publications Warehouse

    Andrews, D.J.; Ma, Shuo

    2010-01-01

    Large dynamic stress off the fault incurs an inelastic response and energy loss, which contributes to the fracture energy, limiting the rupture and slip velocity. Using an explicit finite element method, we model three-dimensional dynamic ruptures on a vertical strike-slip fault in a homogeneous half-space. The material is subjected to a pressure-dependent Drucker-Prager yield criterion. Initial stresses in the medium increase linearly with depth. Our simulations show that the inelastic response is confined narrowly to the fault at depth. There the inelastic strain is induced by large dynamic stresses associated with the rupture front that overcome the effect of the high confining pressure. The inelastic zone increases in size as it nears the surface. For material with low cohesion (~5 MPa) the inelastic zone broadens dramatically near the surface, forming a "flowerlike" structure. The near-surface inelastic strain occurs in both the extensional and the compressional regimes of the fault, induced by seismic waves ahead of the rupture front under a low confining pressure. When cohesion is large (~10 MPa), the inelastic strain is significantly reduced near the surface and confined mostly to depth. Cohesion, however, affects the inelastic zone at depth less significantly. The induced shear microcracks show diverse orientations near the surface, owing to the low confining pressure, but exhibit mostly horizontal slip at depth. The inferred rupture-induced anisotropy at depth has the fast wave direction along the direction of the maximum compressive stress.

  10. Factors Influencing Job Satisfaction and Anticipated Turnover among Nurses in Sidama Zone Public Health Facilities, South Ethiopia

    PubMed Central

    Belachew, Tefera; Yimam, Ebrahim

    2014-01-01

    Background. Workplace turnover is destructive to nursing and patient outcomes as it leads to losing competent and qualified nurses. However, developments of coping strategies demand a clear understanding of workplace variables that either motivate nurses to remain employed or lead them to leave their current jobs. Objective. This study was designed toassess factors influencing job satisfaction and intention to turnover among nurses in Sidama zone public health facilities, in Southern Ethiopia. Method. Cross-sectional study design was carried out on 278 nurses using both qualitative and quantitative data collection methods from May 12 to June 05, 2010. Result. A total of 242 nurses were interviewed giving a response rate of 87%. Nearly two-third (68.6%) of the participants were female, and the mean age was 28 (±6.27) years for both sexes. All job satisfaction subscale except benefit and salary subscale were significant predictors of overall job satisfaction. Satisfactions with work environment and group cohesion (AOR: 0.25 [95% CI: 0.12, 0.51]), single cohesion (AOR: 2.56 [95% CI: 1.27, 5.13]), and working in hospital (AOR: 2.19 [95% CI: 1.12, 4.30]) were the final significant predictors of anticipated turnover of Sidama zone nurses. Conclusions. More than any factors managers should consider the modification of working environment and group cohesions rather than trying to modify nurses to retain and maintain more experienced nurses for the organizations. PMID:24707397

  11. Cohesive stress heterogeneities and the transition from intrinsic ductility to brittleness

    NASA Astrophysics Data System (ADS)

    Tanguy, D.

    2017-11-01

    The influence of nanoscale cavities on the fracture of the Σ 33 {554 }[110 ] symmetrical tilt grain boundary is studied by atomistic simulations. The crack crystallography is chosen such that dislocation emission is easy. A transition from a ductile behavior of the tip to a brittle one is obtained for a dense (coverage beyond 15% and intercavity spacing smaller than 4 nm) distribution of small cavities (sizes in-between 1 and 2 nm). The results are in good agreement with recent experiments from the literature. Even at the highest coverage, the character of the crack is highly sensitive to the initial position of the tip and a mixture of ductile and brittle responses is found. This complexity is beyond the usual criterion based on the drop of the work of separation with the amount of damage in the structure. It is shown that a heterogeneous cohesive zone model, with parameters extracted from the simulations and enriched with a criterion for plasticity, can explain the simulations and reproduce the transition. Additional simulations show that outside this range of small sizes and dense packing, which gives essentially a two-dimensional response (either crack opening or infinite straight dislocation emission), dislocation half-loops appear for intercavity spacing starting at about 4 nm. They constitute, together with regions of low coverage/small cavities, efficient obstacles to brittle cracking. These results could be guidelines to designing interfaces more resistant to solute embrittlement, in general. The cohesive zone model is generic. Furthermore, the {554} single crystal was used to determine to which extent the results depend on the details of the core structure versus the cavity distribution. These elements show that the conclusions reached have a generic character.

  12. Arias intensity assessment of liquefaction test sites on the east side of San Francisco Bay affected by the Loma Prieta, California, earthquake of 17 October 1989

    USGS Publications Warehouse

    Kayen, R.E.

    1997-01-01

    Abstract. Uncompacted artificial-fill deposits on the east side of San Francisco Bay suffered severe levels of soil liquefaction during the Loma Prieta earthquake of 17 October 1989. Damaged areas included maritime-port facilities, office buildings, and shoreline transportation arteries, ranging from 65 to 85 km from the north end of the Loma Prieta rupture zone. Typical of all these sites, which represent occurrences of liquefaction-induced damage farthest from the rupture zone, are low cone penetration test and Standard Penetration Test resistances in zones of cohesionless silty and sandy hydraulic fill, and underlying soft cohesive Holocene and Pleistocene sediment that strongly amplified ground motions. Postearthquake investigations at five study sites using standard penetration tests and cone penetration tests provide a basis for evaluation of the Arias intensity-based methodology for assessment of liquefaction susceptibility. ?? 1997 Kluwer Academic Publishers.

  13. Reliability-based optimization of maintenance scheduling of mechanical components under fatigue

    PubMed Central

    Beaurepaire, P.; Valdebenito, M.A.; Schuëller, G.I.; Jensen, H.A.

    2012-01-01

    This study presents the optimization of the maintenance scheduling of mechanical components under fatigue loading. The cracks of damaged structures may be detected during non-destructive inspection and subsequently repaired. Fatigue crack initiation and growth show inherent variability, and as well the outcome of inspection activities. The problem is addressed under the framework of reliability based optimization. The initiation and propagation of fatigue cracks are efficiently modeled using cohesive zone elements. The applicability of the method is demonstrated by a numerical example, which involves a plate with two holes subject to alternating stress. PMID:23564979

  14. Cohesive zone model for intergranular slow crack growth in ceramics: influence of the process and the microstructure

    NASA Astrophysics Data System (ADS)

    Romero de la Osa, M.; Estevez, R.; Olagnon, C.; Chevalier, J.; Tallaron, C.

    2011-10-01

    Ceramic polycrystals are prone to slow crack growth (SCG) which is stress and environmentally assisted, similarly to observations reported for silica glasses. The kinetics of fracture are known to be dependent on the load level, the temperature and the relative humidity. In addition, evidence is available on the influence of the microstructure on the SCG rate with an increase in the crack velocity with decreasing the grain size. Crack propagation takes place beyond a load threshold, which is grain size dependent. We present a cohesive zone model for the intergranular failure process. The methodology accounts for an intrinsic opening that governs the length of the cohesive zone and allows the investigation of grain size effects. A rate and temperature-dependent cohesive model is proposed (Romero de la Osa M, Estevez R et al 2009 J. Mech. Adv. Mater. Struct. 16 623-31) to mimic the reaction-rupture mechanism. The formulation is inspired by Michalske and Freiman's picture (Michalske and Freiman 1983 J. Am. Ceram. Soc. 66 284-8) together with a recent study by Zhu et al (2005 J. Mech. Phys. Solids 53 1597-623) of the reaction-rupture mechanism. The present investigation extends a previous work (Romero de la Osa et al 2009 Int. J. Fracture 158 157-67) in which the problem is formulated. Here, we explore the influence of the microstructure in terms of grain size, their elastic properties and residual thermal stresses originating from the cooling from the sintering temperature down to ambient conditions. Their influence on SCG for static loadings is reported and the predictions compared with experimental trends. We show that the initial stress state is responsible for the grain size dependence reported experimentally for SCG. Furthermore, the account for the initial stresses enables the prediction of a load threshold below which no crack growth is observed: a crack arrest takes place when the crack path meets a region in compression.

  15. Universal binding energy relation for cleaved and structurally relaxed surfaces.

    PubMed

    Srirangarajan, Aarti; Datta, Aditi; Gandi, Appala Naidu; Ramamurty, U; Waghmare, U V

    2014-02-05

    The universal binding energy relation (UBER), derived earlier to describe the cohesion between two rigid atomic planes, does not accurately capture the cohesive properties when the cleaved surfaces are allowed to relax. We suggest a modified functional form of UBER that is analytical and at the same time accurately models the properties of surfaces relaxed during cleavage. We demonstrate the generality as well as the validity of this modified UBER through first-principles density functional theory calculations of cleavage in a number of crystal systems. Our results show that the total energies of all the relaxed surfaces lie on a single (universal) energy surface, that is given by the proposed functional form which contains an additional length-scale associated with structural relaxation. This functional form could be used in modelling the cohesive zones in crack growth simulation studies. We find that the cohesive law (stress-displacement relation) differs significantly in the case where cracked surfaces are allowed to relax, with lower peak stresses occurring at higher displacements.

  16. Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach.

    PubMed

    Safari, Ashkan; Tukovic, Zeljko; Cardiff, Philip; Walter, Maik; Casey, Eoin; Ivankovic, Alojz

    2016-02-01

    A good understanding of the mechanical stability of biofilms is essential for biofouling management, particularly when mechanical forces are used. Previous biofilm studies lack a damage-based theoretical model to describe the biofilm separation from a surface. The purpose of the current study was to investigate the interfacial separation of a mature biofilm from a rigid glass substrate using a combined experimental and numerical modelling approach. In the current work, the biofilm-glass interfacial separation process was investigated under tensile and shear stresses at the macroscale level, known as modes I and II failure mechanisms respectively. The numerical simulations were performed using a Finite Volume (FV)-based simulation package (OpenFOAM®) to predict the separation initiation using the cohesive zone model (CZM). Atomic force microscopy (AFM)-based retraction curve was used to obtain the separation properties between the biofilm and glass colloid at microscale level, where the CZM parameters were estimated using the Johnson-Kendall-Roberts (JKR) model. In this study CZM is introduced as a reliable method for the investigation of interfacial separation between a biofilm and rigid substrate, in which a high local stress at the interface edge acts as an ultimate stress at the crack tip.This study demonstrated that the total interfacial failure energy measured at the macroscale, was significantly higher than the pure interfacial separation energy obtained by AFM at the microscale, indicating a highly ductile deformation behaviour within the bulk biofilm matrix. The results of this study can significantly contribute to the understanding of biofilm detachments. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Numerical modelling of collapsing volcanic edifices

    NASA Astrophysics Data System (ADS)

    Costa, Ana; Marques, Fernando; Kaus, Boris

    2017-04-01

    The flanks of Oceanic Volcanic Edifice's (OVEs) can occasionally become unstable. If that occurs, they can deform in two different modes: either slowly along localization failure zones (slumps) or catastrophically as debris avalanches. Yet the physics of this process is incompletely understood, and the role of factors such as the OVE's strength (viscosity, cohesion, friction angle), dimensions, geometry, and existence of weak layers remain to be addressed. Here we perform numerical simulations to study the interplay between viscous and plastic deformation on the gravitational collapse of an OVE (diffuse deformation vs. localization of failure along discrete structures). We focus on the contribution of the edifice's strength parameters for the mode of deformation, as well as on the type of basement. Tests were performed for a large OVE (7.5 km high, 200 km long) and either purely viscous (overall volcano edifice viscosities between 1019-1023 Pa.s), or viscoplastic rheology (within a range of cohesion and friction angle values). Results show that (a) for a strong basement (no slip basal boundary condition), the deformation pattern suggests wide/diffuse "listric" deformation within the volcanic edifice, without the development of discrete plastic failure zones; (b) for a weak basement (free slip basal boundary condition), rapid collapse of the edifice through the propagation of plastic failure structures within the edifice occurs. Tests for a smaller OVE (4.5 km by 30 km) show that failure localization along large-scale listric structures occurs more readily for different combinations of cohesion and friction angles. In these tests, high cohesion values combined with small friction angles lead to focusing of deformation along a narrower band. Tests with a weak layer underlying part of the volcanic edifice base show deformation focused along discrete structures mainly dipping towards the distal sector of the volcano. These tests for a small OVE constitute a promising basis for the study of a currently active slump in the SE flank of Pico Island (Azores, Portugal). We will also address the effect of lithospheric flexure, and discuss initial 3D modelling results.

  18. Gradient boride layers formed by diffusion carburizing and laser boriding

    NASA Astrophysics Data System (ADS)

    Kulka, M.; Makuch, N.; Dziarski, P.; Mikołajczak, D.; Przestacki, D.

    2015-04-01

    Laser boriding, instead of diffusion boriding, was proposed to formation of gradient borocarburized layers. The microstructure and properties of these layers were compared to those-obtained after typical diffusion borocarburizing. First method of treatment consists in diffusion carburizing and laser boriding only. In microstructure three zones are present: laser borided zone, hardened carburized zone and carburized layer without heat treatment. However, the violent decrease in the microhardness was observed below the laser borided zone. Additionally, these layers were characterized by a changeable value of mass wear intensity factor thus by a changeable abrasive wear resistance. Although at the beginning of friction the very low values of mass wear intensity factor Imw were obtained, these values increased during the next stages of friction. It can be caused by the fluctuations in the microhardness of the hardened carburized zone (HAZ). The use of through hardening after carburizing and laser boriding eliminated these fluctuations. Two zones characterized the microstructure of this layer: laser borided zone and hardened carburized zone. Mass wear intensity factor obtained a constant value for this layer and was comparable to that-obtained in case of diffusion borocarburizing and through hardening. Therefore, the diffusion boriding could be replaced by the laser boriding, when the high abrasive wear resistance is required. However, the possibilities of application of laser boriding instead of diffusion process were limited. In case of elements, which needed high fatigue strength, the substitution of diffusion boriding by laser boriding was not advisable. The surface cracks formed during laser re-melting were the reason for relatively quickly first fatigue crack. The preheating of the laser treated surface before laser beam action would prevent the surface cracks and cause the improved fatigue strength. Although the cohesion of laser borided carburized layer was sufficient, the diffusion borocarburized layer showed a better cohesion.

  19. Constitutive Modeling of the Facesheet to Core Interface in Honeycomb Sandwich Panels Subject to Mode I Delamination

    NASA Technical Reports Server (NTRS)

    Hoewer, Daniel; Lerch, Bradley A.; Bednarcyk, Brett A.; Pineda, Evan Jorge; Reese, Stefanie; Simon, Jaan-Willem

    2017-01-01

    A new cohesive zone traction-separation law, which includes the effects of fiber bridging, has been developed, implemented with a finite element (FE) model, and applied to simulate the delamination between the facesheet and core of a composite honeycomb sandwich panel. The proposed traction-separation law includes a standard initial cohesive component, which accounts for the initial interfacial stiffness and energy release rate, along with a new component to account for the fiber bridging contribution to the delamination process. Single cantilever beam tests on aluminum honeycomb sandwich panels with carbon fiber reinforced polymer facesheets were used to characterize and evaluate the new formulation and its finite element implementation. These tests, designed to evaluate the mode I toughness of the facesheet to core interface, exhibited significant fiber bridging and large crack process zones, giving rise to a concave downward concave upward pre-peak shape in the load-displacement curve. Unlike standard cohesive formulations, the proposed formulation captures this observed shape, and its results have been shown to be in excellent quantitative agreement with experimental load-displacement and apparent critical energy release rate results, representative of a payload fairing structure, as well as local strain fields measured with digital image correlation.

  20. Soldiers Have to Eat Soup Together for a Long Time

    DTIC Science & Technology

    2007-03-10

    negatively impacted unit cohesion. The definition of cohesion used for this project is that of “ social cohesion ” or trust based on shared successes...fight.” 9 Napoleon was referring to social cohesion or trust based on shared successes during training and operations. The DoD’s mobilization

  1. Geometry of the Nojima fault at Nojima-Hirabayashi, Japan - II. Microstructures and their implications for permeability and strength

    USGS Publications Warehouse

    Moore, Diane E.; Lockner, D.A.; Ito, H.; Ikeda, R.; Tanaka, H.; Omura, K.

    2009-01-01

    Samples of damage-zone granodiorite and fault core from two drillholes into the active, strike-slip Nojima fault zone display microstructures and alteration features that explain their measured present-day strengths and permeabilities and provide insight on the evolution of these properties in the fault zone. The least deformed damage-zone rocks contain two sets of nearly perpendicular (60-90?? angles), roughly vertical fractures that are concentrated in quartz-rich areas, with one set typically dominating over the other. With increasing intensity of deformation, which corresponds generally to increasing proximity to the core, zones of heavily fragmented rock, termed microbreccia zones, develop between prominent fractures of both sets. Granodiorite adjoining intersecting microbreccia zones in the active fault strands has been repeatedly fractured and locally brecciated, accompanied by the generation of millimeter-scale voids that are partly filled with secondary minerals. Minor shear bands overprint some of the heavily deformed areas, and small-scale shear zones form from the pairing of closely spaced shear bands. Strength and permeability measurements were made on core collected from the fault within a year after a major (Kobe) earthquake. Measured strengths of the samples decrease regularly with increasing fracturing and fragmentation, such that the gouge of the fault core and completely brecciated samples from the damage zone are the weakest. Permeability increases with increasing disruption, generally reaching a peak in heavily fractured but still more or less cohesive rock at the scale of the laboratory samples. Complete loss of cohesion, as in the gouge or the interiors of large microbreccia zones, is accompanied by a reduction of permeability by 1-2 orders of magnitude below the peak values. The core samples show abundant evidence of hydrothermal alteration and mineral precipitation. Permeability is thus expected to decrease and strength to increase somewhat in active fault strands between earthquakes, as mineral deposits progressively seal fractures and fill pore spaces. ?? Birkh??user Verlag, Basel 2009.

  2. Impact of Truck Loading on Design and Analysis of Asphaltic Pavement Structures : Phase III

    DOT National Transportation Integrated Search

    2012-03-01

    This study investigated the impact of the realistic constitutive material behavior of asphalt layer (both nonlinear inelastic : and fracture) for the prediction of pavement performance. To this end, this study utilized a cohesive zone model to consid...

  3. Thermo-mechanical pressurization of experimental faults in cohesive rocks during seismic slip

    NASA Astrophysics Data System (ADS)

    Violay, M.; Di Toro, G.; Nielsen, S.; Spagnuolo, E.; Burg, J. P.

    2015-11-01

    Earthquakes occur because fault friction weakens with increasing slip and slip rates. Since the slipping zones of faults are often fluid-saturated, thermo-mechanical pressurization of pore fluids has been invoked as a mechanism responsible for frictional dynamic weakening, but experimental evidence is lacking. We performed friction experiments (normal stress 25 MPa, maximal slip-rate ∼3 ms-1) on cohesive basalt and marble under (1) room-humidity and (2) immersed in liquid water (drained and undrained) conditions. In both rock types and independently of the presence of fluids, up to 80% of frictional weakening was measured in the first 5 cm of slip. Modest pressurization-related weakening appears only at later stages of slip. Thermo-mechanical pressurization weakening of cohesive rocks can be negligible during earthquakes due to the triggering of more efficient fault lubrication mechanisms (flash heating, frictional melting, etc.).

  4. Delamination Behavior of L-Shaped Laminated Composites

    NASA Astrophysics Data System (ADS)

    Geleta, Tsinuel N.; Woo, Kyeongsik; Lee, Bongho

    2018-05-01

    We studied the delamination behavior of L-shaped laminated composites numerically and experimentally. In finite-element modeling, cohesive zone modeling was used to simulate the delamination of plies. Cohesive elements were inserted between bulk elements at each interlayer to represent the occurrence of multiple delaminations. The laminated composite models were subjected to several types of loading inducing opening and shearing types of delamination. Numerical results were compared to those in the literature and of experiments conducted in this study. The results were carefully examined to investigate diverse delamination initiation and propagation behaviors. The effect of varying presence and location of pre-crack was also studied.

  5. Adhesion beyond the interface: Molecular adaptations of the mussel byssus to the intertidal zone

    NASA Astrophysics Data System (ADS)

    MIller, Dusty Rose

    The California mussel, Mytilus californianus, adheres robustly in the high-energy and oxidizing intertidal zone with a fibrous holdfast called the byssus using 3,4-dihydroxyphenyl-L-alanine (Dopa)-containing adhesive mussel foot proteins (mfps). There are many supporting roles to mussel adhesion that are intimately linked and ultimately responsible for mussel byssus's durable and dynamic adhesion. This dissertation explores these supporting mechanisms, including delivery of materials underwater, iron binding, friction, and antioxidant activity. As the outermost covering of the byssus, the cuticle deserves particular attention for its supporting roles to adhesion including the high stiffness and extensibility of the M. californianus byssal cuticle, which make it one of the most energy tolerant materials known. The cuticle's matrix-granule composite structure contributes to its toughness by microcracking between its harder granules and softer matrix. We investigated delivery of cuticular material underwater, cohesion of cuticle proteins, and surface damage mitigation by cuticle protein-based coacervates. To investigate underwater material delivery, we made cuticle matrix mimics by coacervating a key cuticular protein, Mytilus californianus foot protein 1, mfp-1, with hyaluronic acid. These matrix mimics coacervated over a wide range of solution conditions, delivered concentrated material, settled on and coated surfaces underwater. Because the granules are composed of mfp-1 condensed with iron, we used the surface forces apparatus to investigate the effects of iron on the cohesion of mfp-1 from two different species of mussels and found that subtle sequence variations modulate cohesion. Using the coacervate matrix mimics and, modeling the granules as a hard surface (mica), we investigated the wear protection of coacervated mfp-1/HA to mica under frictional shear and found that preventing wear depends critically on the presence of Dopa groups. In addition to cuticle-derived mechanisms for adhesion protection, we also tested for direct chemical mechanisms by tracking redox in the mussel adhesive plaques and found a persistent reservoir of antioxidant activity that can protect Dopa from oxidation. Overall, the mussel byssus represents an excellent model system for understanding adaptive mechanisms of both underwater adhesives and tough materials and I propose in this dissertation that these supporting mechanisms are intimately linked and ultimately responsible for the durable and dynamic underwater adhesion of mussels in the intertidal zone.

  6. Effect of induced cohesion on stick-slip dynamics in weakly saturated, sheared granular fault gouge

    DOE PAGES

    Dorostkar, Omid; Guyer, Robert A.; Johnson, Paul Allan; ...

    2018-02-28

    We use three-dimensional discrete element calculations to study stick-slip dynamics in a weakly wet granular layer designed to simulate fault gouge. The granular gouge is constituted by 8000 spherical particles with a poly-disperse size distribution. At very low liquid content, liquids impose cohesive and viscous forces on particles. Our simulations show that by increasing the liquid content, friction increases and granular layer shows higher recurrence time between slip events. We also observe that slip events exhibit larger friction drop and layer compaction in wet system compared to dry. We demonstrate that a small volume of liquid induces cohesive forces betweenmore » wet particles that are responsible for an increase in coordination number leading to a more stable arrangement of particles. This stabilization is evidenced with two orders of magnitude lower particle kinetic energy in wet system during stick phase. Similar to previous experimental studies, we observe enhanced frictional strength for wet granular layers. In experiments, the physicochemical processes are believed to be the main reason for such behavior, we show however, that at low confining stresses the hydromechanical effects of induced cohesion are sufficient for observed behavior. Our simulations illuminate the role of particle interactions and demonstrate the conditions under which induced cohesion plays a significant role in fault zone processes, including slip initiation, weakening, and failure.« less

  7. Effect of induced cohesion on stick-slip dynamics in weakly saturated, sheared granular fault gouge

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dorostkar, Omid; Guyer, Robert A.; Johnson, Paul Allan

    We use three-dimensional discrete element calculations to study stick-slip dynamics in a weakly wet granular layer designed to simulate fault gouge. The granular gouge is constituted by 8000 spherical particles with a poly-disperse size distribution. At very low liquid content, liquids impose cohesive and viscous forces on particles. Our simulations show that by increasing the liquid content, friction increases and granular layer shows higher recurrence time between slip events. We also observe that slip events exhibit larger friction drop and layer compaction in wet system compared to dry. We demonstrate that a small volume of liquid induces cohesive forces betweenmore » wet particles that are responsible for an increase in coordination number leading to a more stable arrangement of particles. This stabilization is evidenced with two orders of magnitude lower particle kinetic energy in wet system during stick phase. Similar to previous experimental studies, we observe enhanced frictional strength for wet granular layers. In experiments, the physicochemical processes are believed to be the main reason for such behavior, we show however, that at low confining stresses the hydromechanical effects of induced cohesion are sufficient for observed behavior. Our simulations illuminate the role of particle interactions and demonstrate the conditions under which induced cohesion plays a significant role in fault zone processes, including slip initiation, weakening, and failure.« less

  8. Cohesion-Induced Stabilization in Stick-Slip Dynamics of Weakly Wet, Sheared Granular Fault Gouge

    NASA Astrophysics Data System (ADS)

    Dorostkar, Omid; Guyer, Robert A.; Johnson, Paul A.; Marone, Chris; Carmeliet, Jan

    2018-03-01

    We use three-dimensional discrete element calculations to study stick-slip dynamics in a weakly wet granular layer designed to simulate fault gouge. The granular gouge is constituted by 8,000 spherical particles with a polydisperse size distribution. At very low liquid content, liquids impose cohesive and viscous forces on particles. Our simulations show that by increasing the liquid content, friction increases and granular layer shows higher recurrence time between slip events. We also observe that slip events exhibit larger friction drop and layer compaction in wet system compared to dry. We demonstrate that a small volume of liquid induces cohesive forces between wet particles that are responsible for an increase in coordination number leading to a more stable arrangement of particles. This stabilization is evidenced with 2 orders of magnitude lower particle kinetic energy in wet system during stick phase. Similar to previous experimental studies, we observe enhanced frictional strength for wet granular layers. In experiments, the physicochemical processes are believed to be the main reason for such behavior; we show, however, that at low confining stresses, the hydromechanical effects of induced cohesion are sufficient for observed behavior. Our simulations illuminate the role of particle interactions and demonstrate the conditions under which induced cohesion plays a significant role in fault zone processes, including slip initiation, weakening, and failure.

  9. Laboratory Evidence of Strength Recovery of Healed Faults

    NASA Astrophysics Data System (ADS)

    Masuda, K.

    2015-12-01

    Fault zones consist of a fault core and a surrounding damage zone. Fault zones are typically characterized by the presence of many healed surfaces, the strength of which is unknown. If a healed fault recovers its strength such that its cohesion is equal to or greater than that of the host rock, repeated cycles of fracture and healing may be one mechanism producing wide fault zones. I present laboratory evidence supporting the strength recovery of healed fault surface, obtained by AE monitoring, strain measurements and X-ray CT techniques. The loading experiment was performed with a specimen collected from an exhumed fault zone. Healed surfaces of the rock sample were interpreted to be parallel to slip surfaces. The specimen was a cylinder with 50 mm diameter and 100 mm long. The long axis of the specimen was inclined with respect to the orientation of the healed surfaces. The compression test used a constant loading rate under 50 MPa of confining pressure. Macroscopic failure occurred when the applied differential stress reached 439 MPa. The macro-fracture surface created during the experiment was very close to the preexisting plane. The AE hypocenters closely match the locations of the preexisting healed surface and the new fault plane. The experiment also revealed details of the initial stage of fault development. The new fault zone developed near, but not precisely on the preexisting healed fault plane. An area of heterogeneous structure where stress appears to have concentrated, was where the AEs began, and it was also where the fracture started. This means that the healed surface was not a weak surface and that healing strengthened the fault such that its cohesion was equal to or greater than that of the intact host rock. These results suggest that repeated cycles of fracture and healing may be the main mechanism creating wide fault zones with multiple fault cores and damage zones.

  10. Fracture propagation in Indiana Limestone interpreted via linear softening cohesive fracture model

    NASA Astrophysics Data System (ADS)

    Rinehart, Alex J.; Bishop, Joseph E.; Dewers, Thomas

    2015-04-01

    We examine the use of a linear softening cohesive fracture model (LCFM) to predict single-trace fracture growth in short-rod (SR) and notched 3-point-bend (N3PB) test configurations in Indiana Limestone. The broad goal of this work is to (a) understand the underlying assumptions of LCFM and (b) use experimental similarities and deviations from the LCFM to understand the role of loading paths of tensile fracture propagation. Cohesive fracture models are being applied in prediction of structural and subsurface fracture propagation in geomaterials. They lump the inelastic processes occurring during fracture propagation into a thin zone between elastic subdomains. LCFM assumes that the cohesive zone initially deforms elastically to a maximum tensile stress (σmax) and then softens linearly from the crack opening width at σmax to zero stress at a critical crack opening width w1. Using commercial finite element software, we developed LCFMs for the SR and N3PB configurations. After fixing σmax with results from cylinder splitting tests and finding an initial Young's modulus (E) with unconfined compressive strength tests, we manually calibrate E and w1 in the SR model against an envelope of experimental data. We apply the calibrated LCFM parameters in the N3PB geometry and compare the model against an envelope of N3PB experiments. For accurate simulation of fracture propagation, simulated off-crack stresses are high enough to require inclusion of damage. Different elastic moduli are needed in tension and compression. We hypothesize that the timing and location of shear versus extensional micromechanical failures control the qualitative macroscopic force-versus-displacement response in different tests. For accurate prediction, the LCFM requires a constant style of failure, which the SR configuration maintains until very late in deformation. The N3PB configuration does not maintain this constancy. To be broadly applicable between geometries and failure styles, the LCFM would require additional physics, possibly including elastoplastic damage in the bulk material and more complicated cohesive softening models.

  11. Supporting students' learning in the domain of computer science

    NASA Astrophysics Data System (ADS)

    Gasparinatou, Alexandra; Grigoriadou, Maria

    2011-03-01

    Previous studies have shown that students with low knowledge understand and learn better from more cohesive texts, whereas high-knowledge students have been shown to learn better from texts of lower cohesion. This study examines whether high-knowledge readers in computer science benefit from a text of low cohesion. Undergraduate students (n = 65) read one of four versions of a text concerning Local Network Topologies, orthogonally varying local and global cohesion. Participants' comprehension was examined through free-recall measure, text-based, bridging-inference, elaborative-inference, problem-solving questions and a sorting task. The results indicated that high-knowledge readers benefited from the low-cohesion text. The interaction of text cohesion and knowledge was reliable for the sorting activity, for elaborative-inference and for problem-solving questions. Although high-knowledge readers performed better in text-based and in bridging-inference questions with the low-cohesion text, the interaction of text cohesion and knowledge was not reliable. The results suggest a more complex view of when and for whom textual cohesion affects comprehension and consequently learning in computer science.

  12. Respect the technique: Status-based respect increases minority group social cohesion with majority groups, while also increasing minority collective action tendencies.

    PubMed

    Glasford, Demis E; Johnston, Brian

    2018-01-01

    The present work explores the implications of respect for social change. Social change can be achieved via improved attitudes between minority and majority groups (i.e., social cohesion) or via action taken by minority groups (i.e., collective action). Recent work suggests that the social cohesion route to social change, in particular an emphasis on commonality, may be incompatible with the collective action route to social change. We suggest that social-cohesion strategies rooted in status-based respect may allow for social cohesion and collective action. We experimentally investigated the relative effects of a majority group communicating status-based respect and commonality, as compared to a control, on minority group members' social cohesion with the majority group and willingness to engage in collective action. Status-based respect increased positive attitudes toward a majority group, relative to commonality and control, but was also associated with increased collective action tendencies. Implications for social change are discussed.

  13. Hurricane Sandy Evacuation Among World Trade Center Health Registry Enrollees in New York City.

    PubMed

    Brown, Shakara; Gargano, Lisa M; Parton, Hilary; Caramanica, Kimberly; Farfel, Mark R; Stellman, Steven D; Brackbill, Robert M

    2016-06-01

    Timely evacuation is vital for reducing adverse outcomes during disasters. This study examined factors associated with evacuation and evacuation timing during Hurricane Sandy among World Trade Center Health Registry (Registry) enrollees. The study sample included 1162 adults who resided in New York City's evacuation zone A during Hurricane Sandy who completed the Registry's Hurricane Sandy substudy in 2013. Factors assessed included zone awareness, prior evacuation experience, community cohesion, emergency preparedness, and poor physical health. Prevalence estimates and multiple logistic regression models of evacuation at any time and evacuation before Hurricane Sandy were created. Among respondents who evacuated for Hurricane Sandy (51%), 24% had evacuated before the storm. In adjusted analyses, those more likely to evacuate knew they resided in an evacuation zone, had evacuated during Hurricane Irene, or reported pre-Sandy community cohesion. Evacuation was less likely among those who reported being prepared for an emergency. For evacuation timing, evacuation before Hurricane Sandy was less likely among those with pets and those who reported 14 or more poor physical health days. Higher evacuation rates were observed for respondents seemingly more informed and who lived in neighborhoods with greater social capital. Improved disaster messaging that amplifies these factors may increase adherence with evacuation warnings. (Disaster Med Public Health Preparedness. 2016;10:411-419).

  14. Fracture characterization of human cortical bone under mode II loading using the end-notched flexure test.

    PubMed

    Silva, F G A; de Moura, M F S F; Dourado, N; Xavier, J; Pereira, F A M; Morais, J J L; Dias, M I R; Lourenço, P J; Judas, F M

    2017-08-01

    Fracture characterization of human cortical bone under mode II loading was analyzed using a miniaturized version of the end-notched flexure test. A data reduction scheme based on crack equivalent concept was employed to overcome uncertainties on crack length monitoring during the test. The crack tip shear displacement was experimentally measured using digital image correlation technique to determine the cohesive law that mimics bone fracture behavior under mode II loading. The developed procedure was validated by finite element analysis using cohesive zone modeling considering a trapezoidal with bilinear softening relationship. Experimental load-displacement curves, resistance curves and crack tip shear displacement versus applied displacement were used to validate the numerical procedure. The excellent agreement observed between the numerical and experimental results reveals the appropriateness of the proposed test and procedure to characterize human cortical bone fracture under mode II loading. The proposed methodology can be viewed as a novel valuable tool to be used in parametric and methodical clinical studies regarding features (e.g., age, diseases, drugs) influencing bone shear fracture under mode II loading.

  15. Simulation of Delamination Propagation in Composites Under High-Cycle Fatigue by Means of Cohesive-Zone Models

    NASA Technical Reports Server (NTRS)

    Turon, Albert; Costa, Josep; Camanho, Pedro P.; Davila, Carlos G.

    2006-01-01

    A damage model for the simulation of delamination propagation under high-cycle fatigue loading is proposed. The basis for the formulation is a cohesive law that links fracture and damage mechanics to establish the evolution of the damage variable in terms of the crack growth rate dA/dN. The damage state is obtained as a function of the loading conditions as well as the experimentally-determined coefficients of the Paris Law crack propagation rates for the material. It is shown that by using the constitutive fatigue damage model in a structural analysis, experimental results can be reproduced without the need of additional model-specific curve-fitting parameters.

  16. Numerical Simulation for Predicting Fatigue Damage Progress in Notched CFRP Laminates by Using Cohesive Elements

    NASA Astrophysics Data System (ADS)

    Okabe, Tomonaga; Yashiro, Shigeki

    This study proposes the cohesive zone model (CZM) for predicting fatigue damage growth in notched carbon-fiber-reinforced composite plastic (CFRP) cross-ply laminates. In this model, damage growth in the fracture process of cohesive elements due to cyclic loading is represented by the conventional damage mechanics model. We preliminarily investigated whether this model can appropriately express fatigue damage growth for a circular crack embedded in isotropic solid material. This investigation demonstrated that this model could reproduce the results with the well-established fracture mechanics model plus the Paris' law by tuning adjustable parameters. We then numerically investigated the damage process in notched CFRP cross-ply laminates under tensile cyclic loading and compared the predicted damage patterns with those in experiments reported by Spearing et al. (Compos. Sci. Technol. 1992). The predicted damage patterns agreed with the experiment results, which exhibited the extension of multiple types of damage (e.g., splits, transverse cracks and delaminations) near the notches.

  17. Investigating the settling dynamics of cohesive silt particles with particle-resolving simulations

    NASA Astrophysics Data System (ADS)

    Sun, Rui; Xiao, Heng; Sun, Honglei

    2018-01-01

    The settling of cohesive sediment is ubiquitous in aquatic environments, and the study of the settling process is important for both engineering and environmental reasons. In the settling process, the silt particles show behaviors that are different from non-cohesive particles due to the influence of inter-particle cohesive force. For instance, the flocs formed in the settling process of cohesive silt can loosen the packing, and thus the structural densities of cohesive silt beds are much smaller than that of non-cohesive sand beds. While there is a consensus that cohesive behaviors depend on the characteristics of sediment particles (e.g., Bond number, particle size distribution), little is known about the exact influence of these characteristics on the cohesive behaviors. In addition, since the cohesive behaviors of the silt are caused by the inter-particle cohesive forces, the motions of and the contacts among silt particles should be resolved to study these cohesive behaviors in the settling process. However, studies of the cohesive behaviors of silt particles in the settling process based on particle-resolving approach are still lacking. In the present work, three-dimensional settling process is investigated numerically by using CFD-DEM (Computational Fluid Dynamics-Discrete Element Method). The inter-particle collision force, the van der Waals force, and the fluid-particle interaction forces are considered. The numerical model is used to simulate the hindered settling process of silt based on the experimental setup in the literature. The results obtained in the simulations, including the structural densities of the beds, the characteristic lines, and the particle terminal velocity, are in good agreement with the experimental observations in the literature. To the authors' knowledge, this is the first time that the influences of non-dimensional Bond number and particle polydispersity on the structural densities of silt beds have been investigated separately. The results demonstrate that the cohesive behavior of silt in the settling process is attributed to both the cohesion among silt particles themselves and the particle polydispersity. To guide to the macro-scale modeling of cohesive silt sedimentation, the collision frequency functions obtained in the numerical simulations are also presented based on the micromechanics of particles. The results obtained by using CFD-DEM indicate that the binary collision theory over-estimated the particle collision frequency in the flocculation process at high solid volume fraction.

  18. Deformation fields near a steady fatigue crack with anisotropic plasticity

    DOE PAGES

    Gao, Yanfei

    2015-11-30

    In this work, from finite element simulations based on an irreversible, hysteretic cohesive interface model, a steady fatigue crack can be realized if the crack extension exceeds about twice the plastic zone size, and both the crack increment per loading cycle and the crack bridging zone size are smaller than the plastic zone size. The corresponding deformation fields develop a plastic wake behind the crack tip and a compressive residual stress field ahead of the crack tip. In addition, the Hill’s plasticity model is used to study the role of plastic anisotropy on the retardation of fatigue crack growth andmore » the elastic strain fields. It is found that for Mode-I cyclic loading, an enhanced yield stress in directions that are inclined from the crack plane will lead to slower crack growth rate, but this retardation is insignificant for typical degrees of plastic anisotropy. Furthermore, these results provide key inputs for future comparisons to neutron and synchrotron diffraction measurements that provide full-field lattice strain mapping near fracture and fatigue crack tips, especially in textured materials such as wrought or rolled Mg alloys.« less

  19. Deformation fields near a steady fatigue crack with anisotropic plasticity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gao, Yanfei

    In this work, from finite element simulations based on an irreversible, hysteretic cohesive interface model, a steady fatigue crack can be realized if the crack extension exceeds about twice the plastic zone size, and both the crack increment per loading cycle and the crack bridging zone size are smaller than the plastic zone size. The corresponding deformation fields develop a plastic wake behind the crack tip and a compressive residual stress field ahead of the crack tip. In addition, the Hill’s plasticity model is used to study the role of plastic anisotropy on the retardation of fatigue crack growth andmore » the elastic strain fields. It is found that for Mode-I cyclic loading, an enhanced yield stress in directions that are inclined from the crack plane will lead to slower crack growth rate, but this retardation is insignificant for typical degrees of plastic anisotropy. Furthermore, these results provide key inputs for future comparisons to neutron and synchrotron diffraction measurements that provide full-field lattice strain mapping near fracture and fatigue crack tips, especially in textured materials such as wrought or rolled Mg alloys.« less

  20. Modeling Zone-3 Protection with Generic Relay Models for Dynamic Contingency Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huang, Qiuhua; Vyakaranam, Bharat GNVSR; Diao, Ruisheng

    This paper presents a cohesive approach for calculating and coordinating the settings of multiple zone-3 protections for dynamic contingency analysis. The zone-3 protections are represented by generic distance relay models. A two-step approach for determining zone-3 relay settings is proposed. The first step is to calculate settings, particularly, the reach, of each zone-3 relay individually by iteratively running line open-end fault short circuit analysis; the blinder is also employed and properly set to meet the industry standard under extreme loading conditions. The second step is to systematically coordinate the protection settings of the zone-3 relays. The main objective of thismore » coordination step is to address the over-reaching issues. We have developed a tool to automate the proposed approach and generate the settings of all distance relays in a PSS/E dyr format file. The calculated zone-3 settings have been tested on a modified IEEE 300 system using a dynamic contingency analysis tool (DCAT).« less

  1. Occurrence of cohesion of metals during combined plastic deformation

    NASA Technical Reports Server (NTRS)

    Aynbinder, S. G.; Klokova, E. F.

    1980-01-01

    Experiments were conducted to study the cohesion of metals with surface films of varying thickness and hardness. It was established that the deformation necessary for the occurrence of cohesion is determined by the correlation of mechanical properties of the films and the base metal. The greater the relative hardness of the film the lower the deformation necessary for the occurrence of cohesion. The films are as plastic as the base metal prevent cohesion, since in this case it is impossible for sections of metal to appear that are free of contaminants. The physical perculiarities of metals that determine their capability for coalescence under conditions of dry friction are the relative hardness and plasticity of the oxide films formed on their surface under atmospheric conditions.

  2. Loading Analysis of Composite Wind Turbine Blade for Fatigue Life Prediction of Adhesively Bonded Root Joint

    NASA Astrophysics Data System (ADS)

    Salimi-Majd, Davood; Azimzadeh, Vahid; Mohammadi, Bijan

    2015-06-01

    Nowadays wind energy is widely used as a non-polluting cost-effective renewable energy resource. During the lifetime of a composite wind turbine which is about 20 years, the rotor blades are subjected to different cyclic loads such as aerodynamics, centrifugal and gravitational forces. These loading conditions, cause to fatigue failure of the blade at the adhesively bonded root joint, where the highest bending moments will occur and consequently, is the most critical zone of the blade. So it is important to estimate the fatigue life of the root joint. The cohesive zone model is one of the best methods for prediction of initiation and propagation of debonding at the root joint. The advantage of this method is the possibility of modeling the debonding without any requirement to the remeshing. However in order to use this approach, it is necessary to analyze the cyclic loading condition at the root joint. For this purpose after implementing a cohesive interface element in the Ansys finite element software, one blade of a horizontal axis wind turbine with 46 m rotor diameter was modelled in full scale. Then after applying loads on the blade under different condition of the blade in a full rotation, the critical condition of the blade is obtained based on the delamination index and also the load ratio on the root joint in fatigue cycles is calculated. These data are the inputs for fatigue damage growth analysis of the root joint by using CZM approach that will be investigated in future work.

  3. Cohesive model applied to fracture propagation in Indiana Limestone

    NASA Astrophysics Data System (ADS)

    Dewers, T. A.; Rinehart, A. J.; Bishop, J. E.

    2014-12-01

    We apply a cohesive fracture (CF) model to results of short-rod (SR), notched 3-point-bend (N3PB) tests, and Brazil tests in Indiana Limestone. Calibration and validation of the model are performed within a commercial finite element modeling platform. By using a linear traction-displacement softening response for a defined fracture-opening displacement (w1) following peak tensile stress (σcrit), the CF model numerically lumps different spatially distributed inelastic processes occurring at and around fracture tips into a thin zone within an elastic domain. Both the SR and the N3PB test specimen geometries use a notch partway through the sample to control the location of fracture propagation. We develop a mesh for both the SR and N3PB geometries with a narrow cohesive zone in the center of notches. From the Brazil tests, we find a tensile splitting stress (σsplit) of 5.9 MPa. We use a σsplit as the peak tensile stress (σcrit) for all simulations. The Young's modulus (E) and the critical crack opening distance (w1) of the CF model are calibrated against the SR data. The model successfully captures the elastic, yield, peak, and initial and late failure behavior and compares favorably against the N3PB tests. Differences in force-displacement and crack propagation are primarily caused by: more mixed-mode (shear and opening) crack propagation in N3PB than in SR tests, causing a higher peak; and transition from compression (high E) to tension (low E) in a larger volume of the N3PB sample than in the SR geometry. This material is based upon work supported as part of the Center for Frontiers of Subsurface Energy Security, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0001114. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  4. Exploring the Effect of Background Knowledge and Text Cohesion on Learning from Texts in Computer Science

    ERIC Educational Resources Information Center

    Gasparinatou, Alexandra; Grigoriadou, Maria

    2013-01-01

    In this study, we examine the effect of background knowledge and local cohesion on learning from texts. The study is based on construction-integration model. Participants were 176 undergraduate students who read a Computer Science text. Half of the participants read a text of maximum local cohesion and the other a text of minimum local cohesion.…

  5. Influence of group cohesion on maternal well-being among participants in a support/education group program for single mothers.

    PubMed

    Lipman, Ellen L; Waymouth, Marjorie; Gammon, Tara; Carter, Patricia; Secord, Margaret; Leung, Olivia; Mills, Brenda; Hicks, Frances

    2007-10-01

    Single mothers are at increased risk of psychosocial disadvantage, social isolation and physical and mental health difficulties. The authors present (1) the results of group cohesion assessments completed by mothers participating in a trial of community-based support/education groups, and (2) assessments of the association between group cohesion ratings and intervention outcomes of maternal self-evaluations of well-being (mood, self-esteem, and social support) and parenting. Mothers participating in groups completed the Group Atmosphere Scale, a measure of group cohesion, post-group. Overall, most participants provided strong ratings of group cohesion. Significant associations were found between group cohesion and specific positive outcomes. This suggests a positive association between group cohesion and mood, self-esteem, social support, and parenting, in this trial.

  6. The importance of cohesion and enjoyment for the fitness improvement of 8-10-year-old children participating in a team and individual sport school-based physical activity intervention.

    PubMed

    Elbe, Anne-Marie; Wikman, Johan Michael; Zheng, Miky; Larsen, Malte Nejst; Nielsen, Glen; Krustrup, Peter

    2017-04-01

    This study investigates the enjoyment and cohesion of school children participating in a school-based high-intensity physical activity (PA) intervention. Both enjoyment and cohesion have been found to be important factors for adherence to regular physical and sport activity, an important outcome of PA interventions. The sample consisted of 300 pupils (mean age: 9.3 years; 52.7% female) assigned to a team sport intervention, an individual sport intervention, or a control group for 10 months. The Physical Activity Enjoyment Scale and Youth Sport Environment Questionnaire were used to measure enjoyment and cohesion. The Yo-Yo IR1C test determined fitness improvements. Results showed that enjoyment and cohesion (social) measured at the beginning of the intervention significantly predict fitness improvements achieved after 10 months. No differing developmental effects over time could be found in the intervention groups with regard to cohesion and enjoyment when comparing them to the control group. However, enjoyment and cohesion (social) significantly decreased in the groups that performed individual sports. Team sports seem to be more advantageous for the development of enjoyment and cohesion, which are both factors that positively impact the health outcomes of the intervention.

  7. Nonlinear fracture of concrete and ceramics

    NASA Technical Reports Server (NTRS)

    Kobayashi, Albert S.; Du, Jia-Ji; Hawkins, Niel M.; Bradt, Richard C.

    1989-01-01

    The nonlinear fracture process zones in an impacted unnotched concrete bend specimen, a prenotched ceramic bend specimen, and an unnotched ceramic/ceramic composite bend specimen were estimated through hybrid experimental numerical analysis. Aggregate bridging in concrete, particulate bridging in ceramics, and fiber bridging in ceramic/ceramic composite are modeled by Barenblatt-type cohesive zones which are incorporated into the finite-element models of the bend specimens. Both generation and propagation analyses are used to estimate the distribution of crack closure stresses in the nonlinear fracture process zones. The finite-element models are then used to simulate fracture tests consisting of rapid crack propagation in an impacted concrete bend specimen, and stable crack growth and strain softening in a ceramic and ceramic/ceramic composite bend specimens.

  8. The influence of crystal habit on the prediction of dry powder inhalation formulation performance using the cohesive-adhesive force balance approach.

    PubMed

    Hooton, Jennifer C; Jones, Matthew D; Harris, Haggis; Shur, Jagdeep; Price, Robert

    2008-09-01

    The aim of this investigation was to study the influence of crystalline habit of active pharmaceutical ingredients on the cohesive-adhesive force balance within model dry powder inhaler (DPI) formulations and the corresponding affect on DPI formulation performance. The cohesive-adhesive balance (CAB) approach to colloid probe atomic force microscopy (AFM) was employed to determine the cohesive and adhesive interactions of micronized budesonide particles against the {102} and {002} faces of budesonide single crystals and crystalline substrates of different sugars (cyclodextrin, lactose, trehalose, raffinose, and xylitol), respectively. These data were used to measure the relative level of cohesion and adhesion via CAB and the possible influence on in vitro performance of a carrier-based DPI formulation. Varying the crystal habit of the drug had a significant effect on the cohesive measurement of micronized budesonide probes, with the cohesive values on the {102} faces being approximately twice that on the {002} crystal faces. However, although different CAB values were measured with the sugars with respect to the crystal faces chosen for the cohesive-based measurement, the overall influence on the rank order of the CAB values was not directly influenced. For these data sets, the CAB gradient indicated that a decrease in the dominance of the adhesive forces led to a concomitant increase in fine particle delivery, reaching a plateau as the cohesive forces became dominant. The study suggested that crystal habit of the primary drug crystals influences the cohesive interactions and the resulting force balance measurements of colloid probe CAB analysis.

  9. Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars

    PubMed Central

    Colangelo, Francesco; Roviello, Giuseppina; Ricciotti, Laura; Ferone, Claudio; Cioffi, Raffaele

    2013-01-01

    The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a different content of normalized sand (up to 66% in weight) and by a homogeneous dispersion of the organic resin have been obtained. Once hardened, these new materials show improved compressive strength and toughness in respect to both the neat geopolymer and the hybrid pastes since the organic polymer provides a more cohesive microstructure, with a reduced amount of microcracks. The microstructural characterization allows to point out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars and concretes. A correlation between microstructural features and mechanical properties has been studied too. PMID:28811418

  10. Fracture-Based Mesh Size Requirements for Matrix Cracks in Continuum Damage Mechanics Models

    NASA Technical Reports Server (NTRS)

    Leone, Frank A.; Davila, Carlos G.; Mabson, Gerald E.; Ramnath, Madhavadas; Hyder, Imran

    2017-01-01

    This paper evaluates the ability of progressive damage analysis (PDA) finite element (FE) models to predict transverse matrix cracks in unidirectional composites. The results of the analyses are compared to closed-form linear elastic fracture mechanics (LEFM) solutions. Matrix cracks in fiber-reinforced composite materials subjected to mode I and mode II loading are studied using continuum damage mechanics and zero-thickness cohesive zone modeling approaches. The FE models used in this study are built parametrically so as to investigate several model input variables and the limits associated with matching the upper-bound LEFM solutions. Specifically, the sensitivity of the PDA FE model results to changes in strength and element size are investigated.

  11. Cohesive zone finite element analysis of crack initiation from a butt joint’s interface corner

    DOE PAGES

    Reedy, E. D.

    2014-09-06

    The Cohesive zone (CZ) fracture analysis techniques are used to predict the initiation of crack growth from the interface corner of an adhesively bonded butt joint. In this plane strain analysis, a thin linear elastic adhesive layer is sandwiched between rigid adherends. There is no preexisting crack in the problem analyzed, and the focus is on how the shape of the traction–separation (T–U) relationship affects the predicted joint strength. Unlike the case of a preexisting interfacial crack, the calculated results clearly indicate that the predicted joint strength depends on the shape of the T–U relationship. Most of the calculations usedmore » a rectangular T–U relationship whose shape (aspect ratio) is defined by two parameters: the interfacial strength σ* and the work of separation/unit area Γ. The principal finding of this study is that for a specified adhesive layer thickness, there is any number of σ*, Γ combinations that generate the same predicted joint strength. For each combination there is a corresponding CZ length. We developed an approximate CZ-like elasticity solution to show how such combinations arise and their connection with the CZ length.« less

  12. Modeling of Blast Furnace with Layered Cohesive Zone

    NASA Astrophysics Data System (ADS)

    Dong, X. F.; Yu, A. B.; Chew, S. J.; Zulli, P.

    2010-04-01

    An ironmaking blast furnace (BF) is a moving bed reactor involving counter-, co-, and cross-current flows of gas, powder, liquids, and solids, coupled with heat exchange and chemical reactions. The behavior of multiple phases directly affects the stability and productivity of the furnace. In the present study, a mathematical model is proposed to describe the behavior of fluid flow, heat and mass transfer, as well as chemical reactions in a BF, in which gas, solid, and liquid phases affect each other through interaction forces, and their flows are competing for the space available. Process variables that characterize the internal furnace state, such as reduction degree, reducing gas and burden concentrations, as well as gas and condensed phase temperatures, have been described quantitatively. In particular, different treatments of the cohesive zone (CZ), i.e., layered, isotropic, and anisotropic nonlayered, are discussed, and their influence on simulation results is compared. The results show that predicted fluid flow and thermochemical phenomena within and around the CZ and in the lower part of the BF are different for different treatments. The layered CZ treatment corresponds to the layered charging of burden and naturally can predict the CZ as a gas distributor and liquid generator.

  13. Seasonal variations in composite riverbank stability in the Lower Jingjiang Reach, China

    NASA Astrophysics Data System (ADS)

    Xia, Junqiang; Zong, Quanli; Deng, Shanshan; Xu, Quanxi; Lu, Jinyou

    2014-11-01

    Bank erosion is a key process in a fluvial system in the context of river dynamics and geomorphology. Since the operation of the Three Gorges Project (TGP), the Lower Jingjiang Reach (LJR) below the dam has experienced continuous channel degradation, with the phenomenon of bank erosion occurring frequently in local reaches. Therefore it is necessary to quantitatively investigate seasonal variations in the stability of composite riverbanks along the reach in order to better understand the fluvial processes in the reach. Laboratory tests were conducted for the sampled soils at six riverbanks during a field survey, with various bank soil properties being presented for the first time. These test results show that: the cohesive bank soils are relatively loose due to the high water contents of 28.5-40.0% and the low dry densities of 1.31-1.47 tonnes/m3; and the cohesion or angle of internal friction generally decreases with an increase in water content of the cohesive soil. Based on the measured cross-sectional profiles and interpolated hydrological data, the near-bank hydrodynamic conditions and soil parameters of two typical composite riverbanks were then determined during the 2007 hydrological year. An improved method was proposed for calculating the stability at the mode of cantilever failure for the overhanging block of a composite riverbank, and the stability degrees of these two riverbanks were calculated at different stages. These results reveal that: (i) the incipient velocity of the non-cohesive lower bank had a magnitude of 0.4 m/s, less than the mean near-bank velocity of about 1.0 m/s, which led to intensive basal erosion especially during the flood season; (ii) the cohesive upper bank before failure had sufficient strength to resist direct fluvial erosion, but the failed soil mass deposited in the near-bank zone was disintegrated easily with the submerged immersion and was then transported downstream by fluvial entrainment; (iii) the degree of bank stability was relatively lower during the flood season, caused by the integrated effects of a process of severe basal erosion and a lower unit weight of 8.6 kN/m3 for the submerged soil; and (iv) the degree of bank stability was lowest at the recession stage, which was caused by the vanishing of the hydrostatic confining pressure and the larger unit weight of 18.0 kN/m3 for the saturated cohesive soil, because of a rapid drawdown in the in-channel water levels with the TGP operation.

  14. Cohesion in Online Student Teams versus Traditional Teams

    ERIC Educational Resources Information Center

    Hansen, David E.

    2016-01-01

    Researchers have found that the electronic methods in use for online team communication today increase communication quality in project-based work situations. Because communication quality is known to influence group cohesion, the present research examined whether online student project teams are more cohesive than traditional teams. We tested…

  15. Companionship in the neighborhood context: Older adults’ living arrangements and perceptions of social cohesion

    PubMed Central

    Bromell, Lea; Cagney, Kathleen A.

    2014-01-01

    This study investigated the impact of neighborhood social cohesion on the perceived companionship of nearly 1,500 community-dwelling older adults from the Neighborhood, Organization, Aging and Health project (NOAH), a Chicago-based study of older adult well-being in the neighborhood context. We hypothesized that the relationship between neighborhood-level social cohesion and individual residents’ reports of companionship would be more pronounced among those who lived alone than those who resided with others. Controlling for age, gender, education, race, marital status, length of neighborhood residence, and self-rated health, neighborhood social cohesion predicted companionship among those who lived alone; for a one-unit increase in neighborhood social cohesion, the odds of reporting companionship increased by half. In contrast, social cohesion did not predict the companionship of those who resided with others. The results suggest that older adults who live alone particularly profit from the benefits of socially cohesive neighborhood environments. PMID:24860203

  16. Numerical Study of Frictional Properties and the Role of Cohesive End-Zones in Large Strike- Slip Earthquakes

    NASA Astrophysics Data System (ADS)

    Lovely, P. J.; Mutlu, O.; Pollard, D. D.

    2007-12-01

    Cohesive end-zones (CEZs) are regions of increased frictional strength and/or cohesion near the peripheries of faults that cause slip distributions to taper toward the fault-tip. Laboratory results, field observations, and theoretical models suggest an important role for CEZs in small-scale fractures and faults; however, their role in crustal-scale faulting and associated large earthquakes is less thoroughly understood. We present a numerical study of the potential role of CEZs on slip distributions in large, multi-segmented, strike-slip earthquake ruptures including the 1992 Landers Earthquake (Mw 7.2) and 1999 Hector Mine Earthquake (Mw 7.1). Displacement discontinuity is calculated using a quasi-static, 2D plane-strain boundary element (BEM) code for a homogeneous, isotropic, linear-elastic material. Friction is implemented by enforcing principles of complementarity. Model results with and without CEZs are compared with slip distributions measured by combined inversion of geodetic, strong ground motion, and teleseismic data. Stepwise and linear distributions of increasing frictional strength within CEZs are considered. The incorporation of CEZs in our model enables an improved match to slip distributions measured by inversion, suggesting that CEZs play a role in governing slip in large, strike-slip earthquakes. Additionally, we present a parametric study highlighting the very great sensitivity of modeled slip magnitude to small variations of the coefficient of friction. This result suggests that, provided a sufficiently well-constrained stress tensor and elastic moduli for the surrounding rock, relatively simple models could provide precise estimates of the magnitude of frictional strength. These results are verified by comparison with geometrically comparable finite element (FEM) models using the commercial code ABAQUS. In FEM models, friction is implemented by use of both Lagrange multipliers and penalty methods.

  17. Cohesion and Trauma: An Examination of a Collegiate Women's Volleyball Team

    ERIC Educational Resources Information Center

    Fletcher, Teresa B.; Meyer, Barbara B.

    2009-01-01

    This study examined the effects of Adventure Based Counseling (i.e., a low-element challenge program) on the cohesion of a collegiate women's volleyball team. Results suggest postintervention improvements in team cohesion. The support created in the challenge experience also transferred to the players helping one another to grieve the untimely…

  18. Pds5 regulators segregate cohesion and condensation pathways in Saccharomyces cerevisiae

    PubMed Central

    Tong, Kevin; Skibbens, Robert V.

    2015-01-01

    Cohesins are required both for the tethering together of sister chromatids (termed cohesion) and subsequent condensation into discrete structures—processes fundamental for faithful chromosome segregation into daughter cells. Differentiating between cohesin roles in cohesion and condensation would provide an important advance in studying chromatin metabolism. Pds5 is a cohesin-associated factor that is essential for both cohesion maintenance and condensation. Recent studies revealed that ELG1 deletion suppresses the temperature sensitivity of pds5 mutant cells. However, the mechanisms through which Elg1 may regulate cohesion and condensation remain unknown. Here, we report that ELG1 deletion from pds5-1 mutant cells results in a significant rescue of cohesion, but not condensation, defects. Based on evidence that Elg1 unloads the DNA replication clamp PCNA from DNA, we tested whether PCNA overexpression would similarly rescue pds5-1 mutant cell cohesion defects. The results indeed reveal that elevated levels of PCNA rescue pds5-1 temperature sensitivity and cohesion defects, but do not rescue pds5-1 mutant cell condensation defects. In contrast, RAD61 deletion rescues the condensation defect, but importantly, neither the temperature sensitivity nor cohesion defects exhibited by pds5-1 mutant cells. In combination, these findings reveal that cohesion and condensation are separable pathways and regulated in nonredundant mechanisms. These results are discussed in terms of a new model through which cohesion and condensation are spatially regulated. PMID:25986377

  19. Pds5 regulators segregate cohesion and condensation pathways in Saccharomyces cerevisiae.

    PubMed

    Tong, Kevin; Skibbens, Robert V

    2015-06-02

    Cohesins are required both for the tethering together of sister chromatids (termed cohesion) and subsequent condensation into discrete structures-processes fundamental for faithful chromosome segregation into daughter cells. Differentiating between cohesin roles in cohesion and condensation would provide an important advance in studying chromatin metabolism. Pds5 is a cohesin-associated factor that is essential for both cohesion maintenance and condensation. Recent studies revealed that ELG1 deletion suppresses the temperature sensitivity of pds5 mutant cells. However, the mechanisms through which Elg1 may regulate cohesion and condensation remain unknown. Here, we report that ELG1 deletion from pds5-1 mutant cells results in a significant rescue of cohesion, but not condensation, defects. Based on evidence that Elg1 unloads the DNA replication clamp PCNA from DNA, we tested whether PCNA overexpression would similarly rescue pds5-1 mutant cell cohesion defects. The results indeed reveal that elevated levels of PCNA rescue pds5-1 temperature sensitivity and cohesion defects, but do not rescue pds5-1 mutant cell condensation defects. In contrast, RAD61 deletion rescues the condensation defect, but importantly, neither the temperature sensitivity nor cohesion defects exhibited by pds5-1 mutant cells. In combination, these findings reveal that cohesion and condensation are separable pathways and regulated in nonredundant mechanisms. These results are discussed in terms of a new model through which cohesion and condensation are spatially regulated.

  20. Inclined indentation of smooth wedge in rock mass

    NASA Astrophysics Data System (ADS)

    Chanyshev, AI; Podyminogin, GM; Lukyashko, OA

    2018-03-01

    The article focuses on the inclined rigid wedge indentation into a rigid-plastic half-plane of rocks with the Mohr–Coulomb-Mohr plasticity. The limiting loads on different sides of the wedge are determined versus the internal friction angle, cohesion and wedge angle. It is shown that when the force is applied along the symmetry axis of the wedge, the zone of plasticity is formed only on one wedge side. In order to form the plasticity zone on both sides of the wedge, it is necessary to apply the force asymmetrically relative to the wedge symmetry axis. An engineering solution for the asymmetrical case implementation is suggested.

  1. Towards a universal description of cohesive-particle flows

    NASA Astrophysics Data System (ADS)

    Lamarche, Casey; Liu, Peiyuan; Kellogg, Kevin; Lattanzi, Aaron; Hrenya, Christine

    2017-11-01

    A universal framework for describing cohesive granular flows seems unattainable based on prior works, making a fundamental continuum theory to predict such flows appear unachievable. For the first time, universal behavior of cohesive-grain flows is demonstrated by linking the macroscopic (many-grain) behavior to grain-grain interactions via two dimensionless groups: a generalized Bond number BoG - ratio of maximum cohesive force to the force driving flow - and a new Agglomerate number Ag - ratio of critical cohesive energy to the granular energy. Cohesive-grain flow is investigated in several systems, and universal behavior is determined via collapse of a cohesion-dependent output variable from each system with the appropriate dimensionless group. Universal behavior is observed using BoG for dense (enduring-contact-dominated) flows and Ag for dilute (collision-dominated) flows, as BoG accounts for the cohesive contact force and Ag for increased collisional dissipation due to cohesion. Hence, a new physical picture is presented, namely, BoG dominates in dense flows, where force chains drive momentum transfer, and Ag dominates in dilute systems, where the dissipative collisions dominate momentum transfer. Apparent discrepancies with past treatments are resolved. Dow Corning Corporation.

  2. The Impact of African American Parents’ Racial Discrimination Experiences and Perceived Neighborhood Cohesion on their Racial Socialization Practices

    PubMed Central

    English, Devin; Busby, Danielle R.; Lambert, Sharon F.; Harrison, Aubrey; Stock, Michelle L.; Gibbons, Frederick X.

    2016-01-01

    Parental racial socialization is a parenting tool used to prepare African American adolescents for managing racial stressors. While it is known that parents’ racial discrimination experiences affect the racial socialization messages they provide, little is known about the influence of factors that promote supportive and communal parenting, such as perceived neighborhood cohesion. In cohesive neighborhoods, neighbors may help parents address racial discrimination by monitoring youth and conveying racial socialization messages; additionally, the effect of neighborhood cohesion on parents’ racial socialization may differ for boys and girls because parents socialize adolescents about race differently based on expected encounters with racial discrimination. Therefore, the current study examines how parents’ perception of neighborhood cohesion and adolescents’ gender moderate associations between parents’ racial discrimination experiences and the racial socialization messages they deliver to their adolescents. Participants were a community sample of 608 African American adolescents (54 % girls; mean age = 15.5) and their primary caregivers (86 % biological mothers; mean age = 42.0). Structural equation modeling indicated that parental racial discrimination was associated with more promotion of mistrust messages for boys and girls in communities with low neighborhood cohesion. In addition, parental racial discrimination was associated with more cultural socialization messages about racial pride and history for boys in neighborhoods with low neighborhood cohesion. The findings suggest that parents’ racial socialization messages are influenced by their own racial discrimination experiences and the cohesiveness of the neighborhood; furthermore, the content of parental messages delivered varies based on adolescents’ gender. PMID:27189721

  3. Superposition of Cohesive Elements to Account for R-Curve Toughening in the Fracture of Composites

    NASA Technical Reports Server (NTRS)

    Davila, Carlos G.; Rose, Cheryl A.; Song, Kyongchan

    2008-01-01

    The relationships between a resistance curve (R-curve), the corresponding fracture process zone length, the shape of the traction/displacement softening law, and the propagation of fracture are examined in the context of the through-the-thickness fracture of composite laminates. A procedure that accounts for R-curve toughening mechanisms by superposing bilinear cohesive elements is proposed. Simple equations are developed for determining the separation of the critical energy release rates and the strengths that define the independent contributions of each bilinear softening law in the superposition. It is shown that the R-curve measured with a Compact Tension specimen test can be reproduced by superposing two bilinear softening laws. It is also shown that an accurate representation of the R-curve is essential for predicting the initiation and propagation of fracture in composite laminates.

  4. Authentic leadership, group cohesion and group identification in security and emergency teams.

    PubMed

    García-Guiu López, Carlos; Molero Alonso, Fernando; Moya Morales, Miguel; Moriano León, Juan Antonio

    2015-01-01

    Authentic leadership (AL) is a kind of leadership that inspires and promotes positive psychological capacities, underlining the moral and ethical component of behavior. The proposed investigation studies the relations among AL, cohesion, and group identification in security and emergency teams. A cross-sectional research design was conducted in which participated 221 members from 26 fire departments and operative teams from the local police of three Spanish provinces. The following questionnaires were administered: Authentic Leadership (ALQ), Group Cohesion (GEQ), and Mael and Ashford's Group Identification Questionnaire. A direct and positive relation was found between AL, cohesion, and group identification. An indirect relation was also found between AL and group cohesion through group identification, indicating the existence of partial mediation. The utility of the proposed model based on AL is considered; this model can be employed by those in charge of the fire departments and operative groups in organizations to improve workteams' cohesion. Both AL and group identification help to explain group cohesion in organizations committed to security and emergencies.

  5. Companionship in the neighborhood context: older adults' living arrangements and perceptions of social cohesion.

    PubMed

    Bromell, Lea; Cagney, Kathleen A

    2014-03-01

    This study investigated the impact of neighborhood social cohesion on the perceived companionship of nearly 1,500 community-dwelling older adults from the Neighborhood, Organization, Aging and Health project (NOAH), a Chicago-based study of older adult well-being in the neighborhood context. We hypothesized that the relationship between neighborhood-level social cohesion and individual residents' reports of companionship would be more pronounced among those who lived alone than those who resided with others. Controlling for age, gender, education, race, marital status, length of neighborhood residence, and self-rated health, neighborhood social cohesion predicted companionship among those who lived alone; for a one-unit increase in neighborhood social cohesion, the odds of reporting companionship increased by half. In contrast, social cohesion did not predict the companionship of those who resided with others. The results suggest that older adults who live alone particularly profit from the benefits of socially cohesive neighborhood environments. © The Author(s) 2013.

  6. Slope stability analysis of landslide in Wayang Windu Geothermal Field, Pangalengan, West Java Province, Indonesia

    NASA Astrophysics Data System (ADS)

    Yuhendar, A. H.; Wusqa, U.; Kartiko, R. D.; Raya, N. R.; Misbahudin

    2016-05-01

    Large-scale landslide occurred in Margamukti village, Pangalengan, Bandung Regency, West Java Province, Indonesia. The landslide damaged geothermal gas pipeline along 300 m in Wayang Windu Geothermal Field. Based on field observation, landslide occured in rotational sliding movement. Laboratory analysis were conducted to obtain the characteristics of the soil. Based on the condition of the landslide in this area, the Factor of Safety can be simulated by the soil mechanics approach. Factor of safety analysis based on soil cohesion and internal friction angle was conducted using manual sensitivity analysis for back analysis. The analysis resulted soil cohesion in critical condition (FS<1) is 6.01 kPa. This value is smaller than cohesion of undisturbed slope soil sample. Water from rainfall is the most important instability factors in research area. Because it decreases cohesion in soils and increases weight and pore water pressure in granular media.

  7. Scaling laws for the mechanics of loose and cohesive granular materials based on Baxter's sticky hard spheres

    NASA Astrophysics Data System (ADS)

    Gaume, Johan; Löwe, Henning; Tan, Shurun; Tsang, Leung

    2017-09-01

    We have conducted discrete element simulations (pfc3d) of very loose, cohesive, granular assemblies with initial configurations which are drawn from Baxter's sticky hard sphere (SHS) ensemble. The SHS model is employed as a promising auxiliary means to independently control the coordination number zc of cohesive contacts and particle volume fraction ϕ of the initial states. We focus on discerning the role of zc and ϕ for the elastic modulus, failure strength, and the plastic consolidation line under quasistatic, uniaxial compression. We find scaling behavior of the modulus and the strength, which both scale with the cohesive contact density νc=zcϕ of the initial state according to a power law. In contrast, the behavior of the plastic consolidation curve is shown to be independent of the initial conditions. Our results show the primary control of the initial contact density on the mechanics of cohesive granular materials for small deformations, which can be conveniently, but not exclusively explored within the SHS-based assembling procedure.

  8. Family Cohesion and Moderate-to-Vigorous Physical Activity Among Mexican Origin Adolescents: A Longitudinal Perspective.

    PubMed

    Bigman, Galya; Rajesh, Vandita; Koehly, Laura M; Strong, Larkin L; Oluyomi, Abiodun O; Strom, Sara S; Wilkinson, Anna V

    2015-07-01

    Existing racial/ethnic disparities in physical activity during childhood increase Hispanics' risk of developing chronic diseases, which serves to increase health disparities. This study examined associations of family cohesion and conflict with self-reported moderate-to-vigorous physical activity (MVPA), controlling for psychosocial covariates such as subjective social status, anxiety, and sensation-seeking. 1000 Mexican origin adolescents reported their MVPA levels approximately 2 years apart. Psychosocial covariates, family cohesion and conflict were measured at the first assessment. Generalized Linear Models were used to prospectively examine the relationship between family cohesion and conflict and subsequent MVPA based on 711 participants who had low levels of baseline MVPA. 35% of boys and 24% of girls reported adequate MVPA levels at follow-up; girls were less likely to report adequate MVPA (RR = 0.76; 95% CI: 0.61-0.93) than boys. Overall, family cohesion was associated with MVPA (P = .01), but family cohesion was not (P = .41). Gender-based analyses revealed that adequate MVPA was associated with family cohesion (RR = 1.40; 95% CI: 1.03-1.88), sensation seeking (RR = 1.05; 95% CI: 1.00-1.10), and age (RR = 0.85; 95% CI: 0.74-0.98) among girls and with subjective social status (RR = 1.20; 95% CI: 1.08-1.33) among boys. The family social environment and gender differences should be addressed in health promotion programs targeting MVPA.

  9. The Impact of African American Parents' Racial Discrimination Experiences and Perceived Neighborhood Cohesion on their Racial Socialization Practices.

    PubMed

    Saleem, Farzana T; English, Devin; Busby, Danielle R; Lambert, Sharon F; Harrison, Aubrey; Stock, Michelle L; Gibbons, Frederick X

    2016-07-01

    Parental racial socialization is a parenting tool used to prepare African American adolescents for managing racial stressors. While it is known that parents' racial discrimination experiences affect the racial socialization messages they provide, little is known about the influence of factors that promote supportive and communal parenting, such as perceived neighborhood cohesion. In cohesive neighborhoods, neighbors may help parents address racial discrimination by monitoring youth and conveying racial socialization messages; additionally, the effect of neighborhood cohesion on parents' racial socialization may differ for boys and girls because parents socialize adolescents about race differently based on expected encounters with racial discrimination. Therefore, the current study examines how parents' perception of neighborhood cohesion and adolescents' gender moderate associations between parents' racial discrimination experiences and the racial socialization messages they deliver to their adolescents. Participants were a community sample of 608 African American adolescents (54 % girls; mean age = 15.5) and their primary caregivers (86 % biological mothers; mean age = 42.0). Structural equation modeling indicated that parental racial discrimination was associated with more promotion of mistrust messages for boys and girls in communities with low neighborhood cohesion. In addition, parental racial discrimination was associated with more cultural socialization messages about racial pride and history for boys in neighborhoods with low neighborhood cohesion. The findings suggest that parents' racial socialization messages are influenced by their own racial discrimination experiences and the cohesiveness of the neighborhood; furthermore, the content of parental messages delivered varies based on adolescents' gender.

  10. Mode I Cohesive Law Characterization of Through-Crack Propagation in a Multidirectional Laminate

    NASA Technical Reports Server (NTRS)

    Bergan, Andrew C.; Davila, Carlos G.; Leone, Frank A.; Awerbuch, Jonathan; Tan, Tein-Min

    2014-01-01

    A method is proposed and assessed for the experimental characterization of through-the-thickness crack propagation in multidirectional composite laminates with a cohesive law. The fracture toughness and crack opening displacement are measured and used to determine a cohesive law. Two methods of computing fracture toughness are assessed and compared. While previously proposed cohesive characterizations based on the R-curve exhibit size effects, the proposed approach results in a cohesive law that is a material property. The compact tension specimen configuration is used to propagate damage while load and full-field displacements are recorded. These measurements are used to compute the fracture toughness and crack opening displacement from which the cohesive law is characterized. The experimental results show that a steady-state fracture toughness is not reached. However, the proposed method extrapolates to steady-state and is demonstrated capable of predicting the structural behavior of geometrically-scaled specimens.

  11. Fault architecture and deformation processes within poorly lithified rift sediments, Central Greece

    NASA Astrophysics Data System (ADS)

    Loveless, Sian; Bense, Victor; Turner, Jenni

    2011-11-01

    Deformation mechanisms and resultant fault architecture are primary controls on the permeability of faults in poorly lithified sediments. We characterise fault architecture using outcrop studies, hand samples, thin sections and grain-size data from a minor (1-10 m displacement) normal-fault array exposed within Gulf of Corinth rift sediments, Central Greece. These faults are dominated by mixed zones with poorly developed fault cores and damage zones. In poorly lithified sediment deformation is distributed across the mixed zone as beds are entrained and smeared. We find particulate flow aided by limited distributed cataclasis to be the primary deformation mechanism. Deformation may be localised in more competent sediments. Stratigraphic variations in sediment competency, and the subsequent alternating distributed and localised strain causes complexities within the mixed zone such as undeformed blocks or lenses of cohesive sediment, or asperities at the mixed zone/protolith boundary. Fault tip bifurcation and asperity removal are important processes in the evolution of these fault zones. Our results indicate that fault zone architecture and thus permeability is controlled by a range of factors including lithology, stratigraphy, cementation history and fault evolution, and that minor faults in poorly lithified sediment may significantly impact subsurface fluid flow.

  12. Diffusion-coupled cohesive interface simulations of stress corrosion intergranular cracking in polycrystalline materials

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pu, Chao; Gao, Yanfei; Wang, Yanli

    To study the stress corrosion intergranular cracking mechanism, a diffusion-coupled cohesive zone model (CZM) is proposed for the simulation of the stress-assisted diffusional process along grain boundaries and the mechanical response of grain boundary sliding and separation. This simulation methodology considers the synergistic effects of impurity diffusion driven by pressure gradient and degradation of grain boundary strength by impurity concentration. The diffusion-coupled CZM is combined with crystal plasticity finite element model (CPFEM) to simulate intergranular fracture of polycrystalline material under corrosive environment. Significant heterogeneity of the stress field and extensive impurity accumulation is observed at grain boundaries and junction points.more » Deformation mechanism maps are constructed with respect to the grain boundary degradation factor and applied strain rate, which dictate the transition from internal to near-surface intergranular fracture modes under various strain amplitudes and grain sizes.« less

  13. Magnetic-saturation zone model for two semipermeable cracks in magneto-electro-elastic medium

    NASA Astrophysics Data System (ADS)

    Jangid, Kamlesh

    2018-03-01

    Extension of the PS model (Gao et al. [1]) in piezoelectric materials and the SEMPS model (Fan and Zhao [2]) in MEE materials, is proposed for two semi-permeable cracks in a MEE medium. It is assumed that the magnetic yielding occurs at the continuation of the cracks due to the prescribed loads. We have model these crack continuations as the zones with cohesive saturation limit magnetic induction. Stroh's formalism and complex variable techniques are used to formulate the problem. Closed form analytical expressions are derived for various fracture parameters. A numerical case study is presented for BaTiO3 - CoFe2O4 ceramic cracked plate.

  14. Context matters: Community social cohesion and health behaviors in two South African areas.

    PubMed

    Lippman, Sheri A; Leslie, Hannah H; Neilands, Torsten B; Twine, Rhian; Grignon, Jessica S; MacPhail, Catherine; Morris, Jessica; Rebombo, Dumisani; Sesane, Malebo; El Ayadi, Alison M; Pettifor, Audrey; Kahn, Kathleen

    2018-03-01

    Understanding how social contexts shape HIV risk will facilitate development of effective prevention responses. Social cohesion, the trust and connectedness experienced in communities, has been associated with improved sexual health and HIV-related outcomes, but little research has been conducted in high prevalence settings. We conducted population-based surveys with adults 18-49 in high HIV prevalence districts in Mpumalanga (n = 2057) and North West Province (n = 1044), South Africa. Community social cohesion scores were calculated among the 70 clusters. We used multilevel logistic regression stratified by gender to assess individual- and group-level associations between social cohesion and HIV-related behaviors: recent HIV testing, heavy alcohol use, and concurrent sexual partnerships. Group-level cohesion was protective in Mpumalanga, where perceived social cohesion was higher. For each unit increase in group cohesion, the odds of heavy drinking among men were reduced by 40% (95%CI 0.25, 0.65); the odds of women reporting concurrent sexual partnerships were reduced by 45% (95%CI 0.19, 1.04; p = 0.06); and the odds of reporting recent HIV testing were 1.6 and 1.9 times higher in men and women, respectively. We identified potential health benefits of cohesion across three HIV-related health behaviors in one region with higher overall evidence of group cohesion. There may be a minimum level of cohesion required to yield positive health effects. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Numerical insight into the micromechanics of jet erosion of a cohesive granular material

    NASA Astrophysics Data System (ADS)

    Cuéllar, Pablo; Benseghier, Zeyd; Luu, Li-Hua; Bonelli, Stéphane; Delenne, Jean-Yves; Radjaï, Farhang; Philippe, Pierre

    2017-06-01

    Here we investigate the physical mechanisms behind the surface erosion of a cohesive granular soil induced by an impinging jet by means of numerical simulations coupling fluid and grains at the microscale. The 2D numerical model combines the Discrete Element and Lattice Boltzmann methods (DEM-LBM) and accounts for the granular cohesion with a contact model featuring a paraboloidal yield surface. Here we review first the hydrodynamical conditions imposed by the fluid jet on a solid granular packing, turning then the attention to the impact of cohesion on the erosion kinetics. Finally, the use of an additional subcritical debonding damage model based on the work of Silvani and co-workers provides a novel insight into the internal solicitation of the cohesive granular sample by the impinging jet.

  16. Increases in New Social Network Ties are Associated with Increased Cohesion among Intervention Participants

    PubMed Central

    Gesell, Sabina B.; Barkin, Shari L.; Sommer, Evan C.; Thompson, Jessica R.; Valente, Thomas W.

    2016-01-01

    Objective Many behavior change programs are delivered in group settings to manage implementation costs and to foster support and interactions among group members to facilitate behavior change. Understanding the group dynamics that evolve in group settings (e.g., weight management, Alcoholics Anonymous) is important, yet rarely measured. This paper examined the relationship between social network ties and group cohesion in a group-based intervention to prevent obesity in children. Method The data reported are process measures from an ongoing community-based randomized controlled trial. 305 parents with a child (3-6 years) at risk of developing obesity were assigned to an intervention that taught parents healthy lifestyles. Parents met weekly for 12 weeks in small consistent groups. Two measures were collected at weeks 3 and 6: a social network survey (people in the group with whom one discusses healthy lifestyles); and the validated Perceived Cohesion Scale (Bollen & Hoyle, 1990). We used lagged random and fixed effects regression models to analyze the data. Results Cohesion increased from 6.51 to 6.71 (t=4.4, p<0.01). Network nominations tended to increase over the 3-week period in each network. In the combined discussion and advice network, the number of nominations increased from 1.76 to 1.95 (z=2.59, p<0.01). Cohesion at week 3 was the strongest predictor of cohesion at week 6 (b=0.55, p<0.01). Number of new network nominations at week 6 was positively related to cohesion at week 6 (b=0.06, p<.01). In sum, being able to name new network contacts was associated with feelings of cohesion. Conclusion This is the first study to demonstrate how network changes affect perceived group cohesion within a behavioral intervention. Given that many behavioral interventions occur in group settings, intentionally building new social networks could be promising to augment desired outcomes. PMID:26286298

  17. Increases in Network Ties Are Associated With Increased Cohesion Among Intervention Participants.

    PubMed

    Gesell, Sabina B; Barkin, Shari L; Sommer, Evan C; Thompson, Jessica R; Valente, Thomas W

    2016-04-01

    Many behavior change programs are delivered in group settings to manage implementation costs and to foster support and interactions among group members in order to facilitate behavior change. Understanding the group dynamics that evolve in group settings (e.g., weight management, Alcoholics Anonymous) is important, yet rarely measured. This article examined the relationship between social network ties and group cohesion in a group-based intervention to prevent obesity in children. The data reported are process measures from an ongoing community-based randomized controlled trial. A total of 305 parents with a child (3-6 years) at risk of developing obesity were assigned to an intervention that taught parents healthy lifestyles. Parents met weekly for 12 weeks in small consistent groups. Two measures were collected at Weeks 3 and 6: a social network survey (people in the group with whom one discusses healthy lifestyles) and the validated Perceived Cohesion Scale. We used lagged random and fixed effects regression models to analyze the data. Cohesion increased from 6.51 to 6.71 (t= 4.4,p< .01). Network nominations tended to increase over the 3-week period in each network. In the combined discussion and advice network, the number of nominations increased from 1.76 to 1.95 (z= 2.59,p< .01). Cohesion at Week 3 was the strongest predictor of cohesion at Week 6 (b= 0.55,p< .01). Number of new network nominations at Week 6 was positively related to cohesion at Week 6 (b= 0.06,p< .01). In sum, being able to name new network contacts was associated with feelings of cohesion. This is the first study to demonstrate how network changes affect perceived group cohesion within a behavioral intervention. Given that many behavioral interventions occur in group settings, intentionally building new social networks could be promising to augment desired outcomes. © 2015 Society for Public Health Education.

  18. Barossa Night: cohesion in the British Army officer corps.

    PubMed

    Bury, Patrick

    2017-06-01

    Contrasting the classical explanation of military group cohesion as sustained by interpersonal bonds, recent scholars have highlighted the importance of ritualized communication, training and drills in explaining effective military performance in professional armies. While this has offered a welcome addition to the cohesion literature and a novel micro-sociological method of examining cohesion, its primary evidential base has been combat groups. Indeed, despite their prominent role in directing operations over the past decade, the British Army's officer corps has received relatively little attention from sociologists during this period. No attempt has been made to explain cohesion in the officer corps. Using a similar method to recent cohesion scholars, this paper seeks to address this imbalance by undertaking a micro-sociology of one ritual in particular: 'Barossa Night' in the Royal Irish Regiment. Firstly, it draws on the work of Durkheim to examine how cohesion amongst the officer corps is created and sustained through a dense array of practises during formal social rituals. It provides evidence that the use of rituals highlights that social solidarity is central to understanding officer cohesion. Secondly, following Hockey's work on how private soldiers negotiate order, the paper shows how this solidarity in the officer corps is based on a degree of negotiated order and the need to release organizational tensions inherent in a strictly hierarchical rank structure. It highlights how the awarding of gallantry medals can threaten this negotiated order and fuel deviancy. In examining this behaviour, the paper shows that even amongst an officer class traditionally viewed as the elite upholders of organizational discipline, the negotiation of rank and hierarchy can be fluid. How deviant behaviour is later accepted and normalized by senior officers indicates that negotiated order is as important to understanding cohesion in the British Army's officer corps as it is amongst private soldiers. © London School of Economics and Political Science 2016.

  19. Integrated Communication in Multinational Coalition Operations Within a Comprehensive Approach. Framework Concept

    DTIC Science & Technology

    2010-10-22

    international crisis management operations. Based on the acknowledgment that coalitions are challenged with achieving both cohesive and coherent...conceptual framework for integrating communication in international crisis management operations. Based on the acknowledgment that coalitions are...CHALLENGE: COHESION AND COHERENCE..................................................... 31 3.3 A MANAGEMENT AND CLIENT-CENTRED APPROACH TO

  20. Developing Results-Based Leadership Attributes and Team Cohesiveness through Action Learning

    ERIC Educational Resources Information Center

    Troupe, David

    2010-01-01

    Those who develop leaders in manufacturing settings have little data that describe the usefulness of action learning as a method of developing leaders' abilities to improve results-based leadership attributes or perceptions about their team's cohesiveness. The two purposes of this study were to evaluate an action learning program with regards to…

  1. Reinforcing effect of graphene on the mechanical properties of Al2O3/TiC ceramics

    NASA Astrophysics Data System (ADS)

    Li, Zuo-li; Zhao, Jun; Sun, Jia-lin; Gong, Feng; Ni, Xiu-ying

    2017-12-01

    Multilayer graphene (MLG)-reinforced Al2O3/TiC ceramics were fabricated through hot pressing sintering, and the reinforcing effect of MLG on the microstructure and mechanical properties of the composites was investigated by experiment and simulation. The simulation of dynamic crack initiation and propagation was investigated based on the cohesive zone method. The results show that the composite added with 0.2wt% MLG has excellent flexural strength and high fracture toughness. The major reinforcing mechanisms are the synergistic effect by strong and weak bonding interfaces, MLG pull-out, and grain refinement resulting from the addition of MLG. In addition, the aggravating of crack deflection, branching, blunting, and bridging have indispensable contribution to the improvement of the as-designed materials.

  2. Water: A Sticky Subject?

    ERIC Educational Resources Information Center

    McCarty, Robbie V.

    2000-01-01

    Introduces an activity for fifth grade elementary students on water, cohesion, and adhesion. Provides a list of necessary materials and includes a checklist for performance based assessment. Recommends follow up experiments for testing cohesive property with different liquids. (YDS)

  3. Mind the gap! Automated concept map feedback supports students in writing cohesive explanations.

    PubMed

    Lachner, Andreas; Burkhart, Christian; Nückles, Matthias

    2017-03-01

    Many students are challenged with the demand of writing cohesive explanations. To support students in writing cohesive explanations, we developed a computer-based feedback tool that visualizes cohesion deficits of students' explanations in a concept map. We conducted three studies to investigate the effectiveness of such feedback as well as the underlying cognitive processes. In Study 1, we found that the concept map helped students identify potential cohesion gaps in their drafts and plan remedial revisions. In Study 2, students with concept map feedback conducted revisions that resulted in more locally and globally cohesive, and also more comprehensible, explanations than the explanations of students who revised without concept map feedback. In Study 3, we replicated the findings of Study 2 by and large. More importantly, students who had received concept map feedback on a training explanation 1 week later wrote a transfer explanation without feedback that was more cohesive than the explanation of students who had received no feedback on their training explanation. The automated concept map feedback appears to particularly support the evaluation phase of the revision process. Furthermore, the feedback enabled novice writers to acquire sustainable skills in writing cohesive explanations. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  4. Microstructure, phase composition and corrosion resistance of Ni2O3 coatings produced using laser alloying method

    NASA Astrophysics Data System (ADS)

    Bartkowska, Aneta; Przestacki, Damian; Chwalczuk, Tadeusz

    2016-12-01

    The paper presents the studies' results of microstructure, microhardness, cohesion, phase composition and the corrosion resistance analysis of C45 steel after laser alloying with nickel oxide (Ni2O3). The aim of the laser alloying was to obtain the surface layer with new properties through covering C45 steel by precoat containing modifying compound, and then remelting this precoat using laser beam. As a result of this process the surface layer consisting of remelted zone and heat affected zone was obtained. In the remelted zone an increased amount of modifying elements was observed. It was also found that the surface layer formed during the laser alloying with Ni2O3 was characterized by good corrosion resistance. This property has changed depending on the thickness of the applied precoat. It was observed that the thickness increase of nickel oxides precoat improves corrosion resistance of produced coatings.

  5. Group Cohesion in Experiential Growth Groups

    ERIC Educational Resources Information Center

    Steen, Sam; Vasserman-Stokes, Elaina; Vannatta, Rachel

    2014-01-01

    This article explores the effect of web-based journaling on changes in group cohesion within experiential growth groups. Master's students were divided into 2 groups. Both used a web-based platform to journal after each session; however, only 1 of the groups was able to read each other's journals. Quantitative data collected before and…

  6. The Dyadic Effects of Family Cohesion and Communication on Health-Related Quality of Life: The Moderating Role of Sex.

    PubMed

    Lim, Jung-Won; Shon, En-Jung

    Spouses' ability to care for survivors can be particularly challenging because patients and spouses are interdependent and mutually influence one another. Family functioning such as family cohesion and communication may play a primary role in improving the health-related quality of life (HRQOL) of couples, given that cancer can influence family dynamics. The aims of this study were to investigate the mediating effect of family communication on the relationship between family cohesion and HRQOL and examine the moderating effect of sex on this relationship among cancer survivor-spouse dyads. A total of 91 cancer survivors with a diagnosis of breast, colorectal, or prostate cancer and their spouses were recruited from the University Hospital Registry in Cleveland, Ohio. The dyadic data were analyzed using structural equation modeling with the actor-partner interdependence mediation model. Findings demonstrated that the spouses' own perceived family communication mediated the associations between their own family cohesion and physical HRQOL and between the survivors' family cohesion and physical HRQOL. The spouse actor effects between family communication and HRQOL significantly differed by sex. Enhancing family cohesion and communication within the family can improve the spouses' HRQOL. Findings regarding sex differences serve as a rationale for gender-based approaches to improving HRQOL in survivorship care in the family context. Couple- and/or family-based interventions should be designed to enhance family cohesion and improve family communication skills for effective adjustments within couples and families. Supportive care within the family context can be promoted to address the diverse challenges of survivorship care.

  7. Multiscale Modeling for the Analysis for Grain-Scale Fracture Within Aluminum Microstructures

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Phillips, Dawn R.; Yamakov, Vesselin; Saether, Erik

    2005-01-01

    Multiscale modeling methods for the analysis of metallic microstructures are discussed. Both molecular dynamics and the finite element method are used to analyze crack propagation and stress distribution in a nanoscale aluminum bicrystal model subjected to hydrostatic loading. Quantitative similarity is observed between the results from the two very different analysis methods. A bilinear traction-displacement relationship that may be embedded into cohesive zone finite elements is extracted from the nanoscale molecular dynamics results.

  8. Flow Function of Pharmaceutical Powders Is Predominantly Governed by Cohesion, Not by Friction Coefficients.

    PubMed

    Leung, Lap Yin; Mao, Chen; Srivastava, Ishan; Du, Ping; Yang, Chia-Yi

    2017-07-01

    The purpose of this study was to demonstrate that the flow function (FFc) of pharmaceutical powders, as measured by rotational shear cell, is predominantly governed by cohesion but not friction coefficients. Driven by an earlier report showing an inverse correlation between FFc and the cohesion divided by the corresponding pre-consolidation stress (Wang et al. 2016. Powder Tech. 294:105-112), we performed analysis on a large data set containing 1130 measurements from a ring shear tester and identified a near-perfect inverse correlation between the FFc and cohesion. Conversely, no correlation was found between FFc and friction angles. We also conducted theoretical analysis and estimated such correlations based on Mohr-Coulomb failure model. We discovered that the correlation between FFc and cohesion can sustain as long as the angle of internal friction at incipient flow is not significantly larger than the angle of internal friction at steady-state flow, a condition covering almost all pharmaceutical powders. The outcome of this study bears significance in pharmaceutical development. Because the cohesion value is strongly influenced by the interparticle cohesive forces, this study effectively shows that it is more efficient to improve the pharmaceutical powder flow by lowering the interparticle cohesive forces than by lowering the interparticle frictions. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  9. Leader behaviors, group cohesion, and participation in a walking group program

    PubMed Central

    Izumi, Betty T.; Schulz, Amy J.; Mentz, Graciela; Israel, Barbara A.; Sand, Sharon L.; Reyes, Angela G.; Hoston, Bernadine; Richardson, Dawn; Gamboa, Cindy; Rowe, Zachary; Diaz, Goya

    2015-01-01

    Background Fewer than half of all U.S. adults meet the 2008 Physical Activity Guidelines. Leader behaviors and group cohesion have been associated with increased participation or adherence in sports team and exercise class settings. Physical activity interventions in community settings that encompass these factors may enhance intervention adherence. Purpose To examine the impact of Community Health Promoter leader behaviors and group cohesion on participation in a walking group intervention among racially/ethnically diverse adults in low-to-moderate income communities in Detroit, Mich. Design Data for the current study were drawn from the Walk Your Heart to Health (WYHH) data set. WYHH was a multi-site cluster randomized controlled study with a lagged intervention and outcome measurements at baseline, four, eight, and 32 weeks. Pooled survey data from both intervention arms is used for the current study. Data were analyzed between August 2013 and October 2014. Setting/participants A total of 603 non-Hispanic Black, non-Hispanic White, and Hispanic adults across five cohorts that began the 32-week WYHH intervention between March 2009 and October 2011. Intervention A 32-week long walking group program hosted by community- and faith-based organizations and facilitated by Community Health Promoters. Walking groups met three times per week for 90-minutes per session. To promote participation in or adherence to WYHH, Community Health Promoters used evidence-based strategies to facilitate group cohesion. Group members assumed increasing leadership responsibility for facilitating sessions over time. Main outcome measures Participation in WYHH as measured by consistency of attendance. Results Community Health Promoter leader behaviors were positively associated with participation in WYHH. Social but not task cohesion was significantly associated with consistent participation. Social cohesion may mediate the relationship between leader behaviors and walking group participation. Conclusions Providing leaders with training to build socially cohesive groups may help motivate individuals to continue participation in community-based physical activity programs. PMID:26094226

  10. Tracking cohesive subgroups over time in inferred social networks

    NASA Astrophysics Data System (ADS)

    Chin, Alvin; Chignell, Mark; Wang, Hao

    2010-04-01

    As a first step in the development of community trackers for large-scale online interaction, this paper shows how cohesive subgroup analysis using the Social Cohesion Analysis of Networks (SCAN; Chin and Chignell 2008) and Data-Intensive Socially Similar Evolving Community Tracker (DISSECT; Chin and Chignell 2010) methods can be applied to the problem of identifying cohesive subgroups and tracking them over time. Three case studies are reported, and the findings are used to evaluate how well the SCAN and DISSECT methods work for different types of data. In the largest of the case studies, variations in temporal cohesiveness are identified across a set of subgroups extracted from the inferred social network. Further modifications to the DISSECT methodology are suggested based on the results obtained. The paper concludes with recommendations concerning further research that would be beneficial in addressing the community tracking problem for online data.

  11. Quantifying the in-channel retention of cohesive sediments during artificial flood events using FTIR-DRIFT spectrometry

    NASA Astrophysics Data System (ADS)

    Kurtenbach, A.; Gallé, T.; Buis, K.; de Sutter, R.; Troch, P.; Eisold, B.; Bierl, R.; Symader, W.

    2010-05-01

    Cohesive sediments control river ecosystem quality both as a transport medium for contaminants and as clogging material of stream bottom habitats. However, experimental field studies with fine-grained sediments in fluvial systems are rather scarce owing to the lack of adequate tracers and detection methods. As a result, current modelling approaches only insufficiently describe hydrodynamic transport and depositional behaviour of fine-grained sediments in rivers. We adopted two strategies to specifically study cohesive sediment dynamics in natural systems under defined boundary conditions. First, artificial floods were generated in the Olewiger Bach basin (24 km²), a mid-mountain gravel bed river, in order to characterise the in-channel fine sediment dynamics on their own. The advantage of these artificial flood waves lies in the selective control on some governing processes by experimental design. Second, fine sediment transport and deposition during these controlled reservoir releases were analysed by introducing the clay mineral kaolinite as a fine particle tracer, whose concentration was measured by Fourier transform infrared spectroscopy (FTIR) in diffuse reflectance mode (DRIFT). The DRIFT technique offers some important advantages such as the ability to assess both mineral and organic structures in aquatic particles, good sensitivity and high throughput (Gallé et al. 2004). Our laboratory tests confirm that FTIR-DRIFT spectrometry is capable of detecting the kaolinite tracer even in low percentage solid concentrations. The mass balance of the injected kaolinite for near bank-full artificial floods showed that, in spite of the very fine material and the non-stationary boundary conditions, over 50 percent of the tracer could be retained over a flow length of only 500 m. By combining fine particulate and natural dissolved tracers (e.g. dissolved organic carbon, DOC) we were able to identify the hyporheic zone as a potential short-term retention and storage zone for the introduced kaolinite. Thus, hyporheic exchange and/or deposition losses in riverine dead and channel periphery zones are significant determinants for the mass balance of cohesive particles during floods. Within a multidisciplinary research group, accentuating the relevance and interaction of hydraulic, groundwater, biogeochemical and ecological processes, we will model the kaolinite retention dynamics. This will be performed with the STRIVE-package (STReam-RIVer Ecosystem) developed in the modelling platform "FEMME" (http://www.nioo.knaw.nl/projects/femme). FEMME (a Flexible Environment for Mathematically Modelling the Environment) takes care of the basic necessities for dynamic ecological modelling along with other facilities (calibration, validation, sensitivity analysis, output formulation etc.). It supports a modular structure, facilitating an easy implementation or exchange of submodels to build ecosystem models of different complexity. STRIVE is such a package devoted to model stream or river ecosystems by linking different submodels (e.g. hydraulic and solute/particle transport modules, hyporheic zone module, groundwater module etc.) to integrate and study process interactions and the role of lateral exchanges with adjacent subsystems. A brief overview concerning this modelling environment and its adaptation on the Olewiger Bach system will be outlined. References Gallé, T., Van Lagen, B., Kurtenbach, A., Bierl, R. (2004): An FTIR-DRIFT Study on River Sediment Particle Structure: Implications for Biofilm Dynamics and Pollutant Binding. - Environmental Science and Technology, 38, 4496-4502.

  12. Social Network Influences on Adolescent Substance Use: Disentangling Structural Equivalence from Cohesion

    PubMed Central

    Fujimoto, Kayo; Valente, Thomas W.

    2012-01-01

    This study investigates two contagion mechanisms of peer influence based on direct communication (cohesion) versus comparison through peers who occupy similar network positions (structural equivalence) in the context of adolescents' drinking alcohol and smoking. To date, the two contagion mechanisms have been considered observationally inseparable, but this study attempts to disentangle structural equivalence from cohesion as a contagion mechanism by examining the extent to which the transmission of drinking and smoking behaviors attenuates as a function of social distance (i.e., from immediate friends to indirectly connected peers). Using the U.S. Add Health data consisting of a nationally representative sample of American adolescents (Grades 7-12), this study measured peer risk-taking up to four steps away from the adolescent (friends of friends of friends of friends) using a network exposure model. Peer influence was tested using a logistic regression model of alcohol drinking and cigarette smoking. Results indicate that influence based on structural equivalence tended to be stronger than influence based on cohesion in general, and that the magnitude of the effect decreased up to three steps away from the adolescent (friends of friends of friends). Further analysis indicated that structural equivalence acted as a mechanism of contagion for drinking and cohesion acted as one for smoking. These results indicate that the two transmission mechanisms with differing network proximities can differentially affect drinking and smoking behaviors in American adolescents. PMID:22475405

  13. A mechanics approach to the study of pressure sensitive adhesives and human skin for transdermal drug delivery applications

    NASA Astrophysics Data System (ADS)

    Taub, Marc Barry

    Transdermal drug delivery is an alternative approach to the systemic delivery of pharmaceuticals where drugs are administered through the skin and absorbed percutaneously. This method of delivery offers several advantages over more traditional routes; most notably, the avoidance of the fast-pass metabolism of the liver and gut, the ability to offer controlled release rates, and the possibility for novel devices. Pressure sensitive adhesives (PSAs) are used to bond transdermal drug delivery devices to the skin because of their good initial and long-term adhesion, clean removability, and skin and drug compatibility. However, an understanding of the mechanics of adhesion to the dermal layer, together with quantitative and reproducible test methods for measuring adhesion, have been lacking. This study utilizes a mechanics-based approach to quantify the interfacial adhesion of PSAs bonded to selected substrates, including human dermal tissue. The delamination of PSA layers is associated with cavitation in the PSA followed by the formation of an extensive cohesive zone behind the debond tip. A quantitative metrology was developed to assess the adhesion and delamination of PSAs, such that it could be possible to easily distinguish between the adhesive characteristics of different PSA compositions and to provide a quantitative basis from which the reliability of adhesive layers bonded to substrates could be studied. A mechanics-based model was also developed to predict debonding in terms of the relevant energy dissipation mechanisms active during this process. As failure of transdermal devices may occur cohesively within the PSA layer, adhesively at the interface between the PSA and the skin, or cohesively between the corneocytes that comprise the outermost layer of the skin, it was also necessary to explore the mechanical and fracture properties of human skin. The out-of-plane delamination of corneocytes was studied by determining the strain energy release rate during debonding of cantilever-beam specimens containing thin layers of human dermal tissue at their midline. Finally, the interfacial adhesion of PSAs bonded to human skin was studied and the mechanics model that was developed for PSA failure was extended to provide the capability for in vivo reliability predictions for transdermal systems bonded to human skin.

  14. The Associations and Correlations Between Self-reported Health and Neighborhood Cohesion and Disorder in a Community-dwelling U.S. Chinese Population.

    PubMed

    Dong, XinQi; Bergren, Stephanie M

    2017-08-01

    Characteristics of neighborhood have been found to be associated with physical and psychological health status of older adults, especially in relationship to social dynamics like cohesion and disorder. This study aims to examine correlations and associations between sociodemographic characteristics, self-reported health status, cohesion, and disorder among Chinese older adults in the greater Chicago area. The Population Study of Chinese Elderly in Chicago is a cross-sectional, population-based study with community-dwelling Chinese older adults aged 60 and older, recruited through a community-based participatory research approach. Cohesion was measured through six questions; disorder was measured through eight questions. Correlation and regression analyses were conducted using SAS. Among 3,158 participants enrolled in the study, 92.3% reported any neighborhood cohesion; 69.8% reported any neighborhood disorder. After controlling for age, sex, education, income, marital status, living arrangement, number of children, years in the community, years in the United States, country of origin, language preference, and location, a higher level of cohesion is associated with higher quality of life (odds ratio [OR]: 1.25, 95% confidence interval [CI]: 1.13, 1.39) and a higher level of disorder is associated with lower overall health status (OR: 0.97, 95% CI: 0.95, 0.99) and lower quality of life (OR: 0.96, 95% CI: 0.95, 0.98). Our findings suggest that neighborhood cohesion and neighborhood disorder are correlated to the health of U.S. Chinese older adults. Future longitudinal research should examine the relationship between community characteristics, both structural and social, and health-related outcomes. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  15. A community based intervention program to enhance neighborhood cohesion: The Learning Families Project in Hong Kong.

    PubMed

    Shen, Chen; Wan, Alice; Kwok, Lit Tung; Pang, Sally; Wang, Xin; Stewart, Sunita M; Lam, Tai Hing; Chan, Sophia S

    2017-01-01

    Neighborhood cohesion, which refers to the extent of the connectedness and solidarity among residents in a community or neighborhood, is an important determinant of human health. To enhance neighborhood cohesion, the "Learning Families Project" was developed with a series of intervention programs in Kwun Tong in Hong Kong, a district with low neighborhood cohesion. This project, based on the social ecological model, provided a platform for neighbors to learn, communicate and interact with each other. This quasi-experimental study included two nearby government subsidized low rent housing estates separated by busy main roads. One served as the intervention (Tsui Ping (South) Estate) and one as the control (Shun Tin Estate) estate. The intervention included promotion, resident training and learning programs, embodied by a series of community activities such as talks, day camp, thematic activities and horticulture class. Baseline (before the programs) and follow-up (one year after the programs) surveys were conducted both in the intervention and control estate to assess the impact of the programs on neighborhood cohesion. The number of residents who completed both the baseline and follow-up surveys was 502 in the intervention estate and 476 in the control estate. Neighborhood cohesion significantly improved in the intervention group after the programs (Cohen effect size d: 0.15). Compared with the control group, the improvements in closeness of the neighborhood and trust in neighbors were significantly greater in the intervention group (Cohen effect size d: 0.13 and 0.14, respectively). This brief intervention program using a quasi-experimental study design increased neighborhood cohesion in a low rent housing estate. ClinicalTrials.gov NCT02851667.

  16. A community based intervention program to enhance neighborhood cohesion: The Learning Families Project in Hong Kong

    PubMed Central

    Wan, Alice; Kwok, Lit Tung; Pang, Sally; Wang, Xin; Stewart, Sunita M.; Lam, Tai Hing; Chan, Sophia S.

    2017-01-01

    Background Neighborhood cohesion, which refers to the extent of the connectedness and solidarity among residents in a community or neighborhood, is an important determinant of human health. To enhance neighborhood cohesion, the “Learning Families Project” was developed with a series of intervention programs in Kwun Tong in Hong Kong, a district with low neighborhood cohesion. This project, based on the social ecological model, provided a platform for neighbors to learn, communicate and interact with each other. Methods This quasi-experimental study included two nearby government subsidized low rent housing estates separated by busy main roads. One served as the intervention (Tsui Ping (South) Estate) and one as the control (Shun Tin Estate) estate. The intervention included promotion, resident training and learning programs, embodied by a series of community activities such as talks, day camp, thematic activities and horticulture class. Baseline (before the programs) and follow-up (one year after the programs) surveys were conducted both in the intervention and control estate to assess the impact of the programs on neighborhood cohesion. Results The number of residents who completed both the baseline and follow-up surveys was 502 in the intervention estate and 476 in the control estate. Neighborhood cohesion significantly improved in the intervention group after the programs (Cohen effect size d: 0.15). Compared with the control group, the improvements in closeness of the neighborhood and trust in neighbors were significantly greater in the intervention group (Cohen effect size d: 0.13 and 0.14, respectively). Conclusion This brief intervention program using a quasi-experimental study design increased neighborhood cohesion in a low rent housing estate. Trial registration ClinicalTrials.gov NCT02851667 PMID:28827798

  17. The influence of text cohesion and picture detail on young readers' knowledge of science topics.

    PubMed

    Désiron, Juliette C; de Vries, Erica; Bartel, Anna N; Varahamurti, Nalini

    2017-10-16

    The effects of text cohesion and added pictures on acquired knowledge have been heavily studied each in isolation. Furthermore, studies on the effects of specific characteristics of pictures, whether facilitating or hindering, are scarce. Schnotz's ITCP Model (2014) allows to formulate hypotheses regarding the combined effect of text cohesion and presence and level of detail of a picture. This study investigates these hypotheses in the case of children reading scientific texts. One hundred and one-second-, third-, and fourth-grade pupils with a mean age of 9 years, in the western United States. Data were collected over three sessions to encompass an understanding of each pupil's knowledge based on prior sessions. Results showed a significant increase in pupils' knowledge between pre-test and immediate post-test, but as hypothesized, no significant difference between levels of cohesion. No significant difference between types of pictures was detected. After 1 week, knowledge built with a high cohesive text significantly dropped with low-detail picture, whereas, with high detail, or no picture, there was no significant difference. Results suggested that when participants were given a low-detail picture with a low cohesive text, the integration process of the material was more restricted than with a high cohesive text. © 2017 The British Psychological Society.

  18. Balancing act: the influence of adaptability and cohesion on satisfaction and communication in families facing TBI in Mexico.

    PubMed

    Lehan, Tara J; Stevens, Lillian Flores; Arango-Lasprilla, Juan Carlos; Díaz Sosa, Dulce María; Espinosa Jove, Irma Guadalupe

    2012-01-01

    Much of what is known about family functioning in the face of traumatic brain injury (TBI) is based on research conducted in the United States. The purpose of this study was to (1) describe the levels of family adaptability, cohesion, communication, and satisfaction as reported by Mexican TBI survivors and their family caregivers, (2) test the hypothesis of the Circumplex Model that balanced families would exhibit better communication and greater satisfaction, and (3) explore how TBI survivors' and their family caregivers' perceptions of family adaptability and cohesion influenced their own and the other's perceptions of family communication and satisfaction. In the majority of dyads, both the TBI survivor and the family caregiver endorsed balanced family adaptability and cohesion. Both TBI survivors and their family caregivers reported a relatively high level of family communication and satisfaction. TBI survivors and family caregivers who reported greater levels of family adaptability and cohesion also endorsed better family communication and greater family satisfaction. In addition, individuals with TBI whose family caregiver endorsed balanced family adaptability and cohesion reported better family communication. Further, family caregivers of TBI survivors who reported balanced family adaptability and cohesion reported better family communication. Implications for research and practice are discussed.

  19. Symposium KK: Structure-Property Relationships in Biomineralized and Bio-mimetic Composites

    DTIC Science & Technology

    2010-04-06

    Preventive and Restorative Dental Sciences, UCSF, San Francisco, California. 4:45 PM KK2.8 Damage and Crack Evolution in Mammalian Enamel James Jin...Technology, Graz, Austria. 9:45AMKK6.S AFM and PFM measurements of Enamel in order to Determine the Crack Tip Toughness and Cohesive Zone of Enamel Gerold...11:00 AM KK9.7 Enamel Matrix Guided Growth of Apatite Vuk Uskokovic1. Li Zhu2, Wu Li2 and Stefan Habelitz1; ’Department of Preventive and

  20. Study on Fatigue Performance of Composite Bolted Joints with Bolt-Hole Delamination

    NASA Astrophysics Data System (ADS)

    Liu, M. J.; Yu, S.; Zhao, Q. Y.

    2018-03-01

    Fatigue performance of composite structure with imperfections is a challenging subject at present. Based on cohesive zone method and multi-continuum theory, delamination evolution response and fatigue life prediction of a 3D composite single-lap joint with a bolt-hole have been investigated through computer codes Abaqus and Fe-safe. Results from the comparison of a perfect composite bolted joint with another defect one indicates that a relatively small delamination damage around the bolt hole brings about significant degradation of local material performance. More notably, fatigue life of stress concentration region of composite bolted joints is highly sensitive to external loads, as an increase of 67% cyclic load amplitude leads to an decrease of 99.5% local fatigue life in this study. However, the numerical strategy for solving composite fatigue problems is meaningful to engineering works.

  1. Validating Experimental Bedform Dynamics on Cohesive Sand-Mud Beds in the Dee Estuary

    NASA Astrophysics Data System (ADS)

    Baas, Jaco H.; Baker, Megan; Hope, Julie; Malarkey, Jonathan; Rocha, Renata

    2014-05-01

    Recent laboratory experiments and field measurements have shown that small quantities of cohesive clay, and in particular 'sticky' biological polymers, within a sandy substrate dramatically reduce the development rate of sedimentary bedforms, with major implications for sediment transport rate calculations and process interpretations from the sedimentary record. FURTHER INFORMATION Flow and sediment transport predictions from sedimentary structures found in modern estuaries and within estuarine geological systems are impeded by an almost complete lack of process-based knowledge of the behaviour of natural sediments that consist of mixtures of cohesionless sand and biologically-active cohesive mud. Indeed, existing predictive models are largely based on non-organic cohesionless sands, despite the fact that mud, in pure form or mixed with sand, is the most common sediment on Earth and also the most biologically active interface across a range of Earth-surface environments, including rivers and shallow seas. The multidisciplinary COHBED project uses state-of-the-art laboratory and field technologies to measure the erosional properties of mixed cohesive sediment beds and the formation and stability of sedimentary bedforms on these beds, integrating the key physical and biological processes that govern bed evolution. The development of current ripples on cohesive mixed sediment beds was investigated as a function of physical control on bed cohesion versus biological control on bed cohesion. These investigations included laboratory flume experiments in the Hydrodynamics Laboratory (Bangor University) and field experiments in the Dee estuary (at West Kirby near Liverpool). The flume experiments showed that winnowing of fine-grained cohesive sediment, including biological stabilisers, is an important process affecting the development rate, size and shape of the cohesive bedforms. The ripples developed progressively slower as the kaolin clay fraction in the sandy substrate bed was increased. The same result was obtained for xanthan gum, which is a proxy for biological polymers produced by microphytobenthos. Yet, the xanthan gum was several orders more effective in slowing down ripple development than kaolin clay, suggesting that the cohesive forces for biological polymers are much higher than for clay minerals, and that sedimentological process models should refocus on biostabilisation processes. The first results of the field experiments show that the winnowing of fines from developing ripples and the slowing down of current ripple development in mixed cohesive sediment is mimicked on intertidal flats in the Dee estuary. In particular, these field data revealed that current ripples in cohesive sediment are smaller with more two-dimensional crestlines than in non-cohesive sand. The wider implications of these findings will be discussed. COHBED Project Team (NERC): Alan Davies (Bangor University); Daniel Parsons, Leiping Ye (University of Hull); Jeffrey Peakall (University of Leeds); Dougal Lichtman, Louise O'Boyle, Peter Thorne (NOC Liverpool); Sarah Bass, Andrew Manning, Robert Schindler (University of Plymouth); Rebecca Aspden, Emma Defew, Julie Hope, David Paterson (University of St Andrews)

  2. Crack blunting and the strength of soft elastic solids

    NASA Astrophysics Data System (ADS)

    Hui, C.-Y.; Jagota, A.; Bennison, S. J.; Londono, J. D.

    2003-06-01

    When a material is so soft that the cohesive strength (or adhesive strength, in the case of interfacial fracture) exceeds the elastic modulus of the material, we show that a crack will blunt instead of propagating. Large-deformation finite-element model (FEM) simulations of crack initiation, in which the debonding processes are quantified using a cohesive zone model, are used to support this hypothesis. An approximate analytic solution, which agrees well with the FEM simulation, gives additional insight into the blunting process. The consequence of this result on the strength of soft, rubbery materials is the main topic of this paper. We propose two mechanisms by which crack growth can occur in such blunted regions. We have also performed experiments on two different elastomers to demonstrate elastic blunting. In one system, we present some details on a void growth mechanism for ultimate failure, post-blunting. Finally, we demonstrate how crack blunting can shed light on some long-standing problems in the area of adhesion and fracture of elastomers.

  3. Effect of Cohesion Uncertainty of Granular Materials on the Kinematics of Scaled Models of Fold-and-Thrust Belts

    NASA Astrophysics Data System (ADS)

    Nilfouroushan, F.; Pysklywec, R.; Cruden, S.

    2009-05-01

    Cohesionless or very low cohesion granular materials are widely used in analogue/physical models to simulate brittle rocks in the upper crust. Selection of materials with appropriate cohesion values in such models is important for the simulation of the dynamics of brittle rock deformation in nature. Uncertainties in the magnitude of cohesion (due to measurement errors, extrapolations at low normal stresses, or model setup) in laboratory experiments can possibly result in misinterpretation of the styles and mechanisms of deformation in natural fold-and thrust belts. We ran a series of 2-D numerical models to investigate systematically the effect of cohesion uncertainties on the evolution of models of fold-and-thrust belts. The analyses employ SOPALE, a geodynamic code based on the arbitrary Lagrangian-Eulerian (ALE) finite element method. Similar to analogue models, the material properties of sand and transparent silicone (PDMS) are used to simulate brittle and viscous behaviors of upper crustal rocks. The suite of scaled brittle and brittle-viscous numerical experiments have the same initial geometry but the cohesion value of the brittle layers is increased systematically from 0 to 100 Pa. The stress and strain distribution in different sets of models with different cohesion values are compared and analyzed. The kinematics and geometry of thrust wedges including the location and number of foreland- and hinterland- verging thrust faults, pop-up structures, tapers and topography are also explored and their sensitivity to cohesion value is discussed.

  4. Cohesive phase-field fracture and a PDE constrained optimization approach to fracture inverse problems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tupek, Michael R.

    2016-06-30

    In recent years there has been a proliferation of modeling techniques for forward predictions of crack propagation in brittle materials, including: phase-field/gradient damage models, peridynamics, cohesive-zone models, and G/XFEM enrichment techniques. However, progress on the corresponding inverse problems has been relatively lacking. Taking advantage of key features of existing modeling approaches, we propose a parabolic regularization of Barenblatt cohesive models which borrows extensively from previous phase-field and gradient damage formulations. An efficient explicit time integration strategy for this type of nonlocal fracture model is then proposed and justified. In addition, we present a C++ computational framework for computing in- putmore » parameter sensitivities efficiently for explicit dynamic problems using the adjoint method. This capability allows for solving inverse problems involving crack propagation to answer interesting engineering questions such as: 1) what is the optimal design topology and material placement for a heterogeneous structure to maximize fracture resistance, 2) what loads must have been applied to a structure for it to have failed in an observed way, 3) what are the existing cracks in a structure given various experimental observations, etc. In this work, we focus on the first of these engineering questions and demonstrate a capability to automatically and efficiently compute optimal designs intended to minimize crack propagation in structures.« less

  5. Peer-based control in self-managing teams: linking rational and normative influence with individual and group performance.

    PubMed

    Stewart, Greg L; Courtright, Stephen H; Barrick, Murray R

    2012-03-01

    The authors use a multilevel framework to introduce peer-based control as a motivational state that emerges in self-managing teams. The authors specifically describe how peer-based rational control, which is defined as team members perceiving the distribution of economic rewards as dependent on input from teammates, extends and interacts with the more commonly studied normative control force of group cohesion to explain both individual and collective performance in teams. On the basis of data from 587 factory workers in 45 self-managing teams at 3 organizations, peer-based rational control corresponded with higher performance for both individuals and collective teams. Results further demonstrated that the rational and normative mechanism of peer-based control interacted to explain performance at both the individual and team levels. Increased peer-based rational control corresponded with higher individual and collective performance in teams with low cohesion, but the positive effects on performance were attenuated in cohesive teams.

  6. What are the control mechanisms of evenly-spaced parallel strike-slip faults? Insights from DEM modeling

    NASA Astrophysics Data System (ADS)

    Bonilla Sierra, V.; Donze, F. V.; Duriez, J.; Klinger, Y.; Scholtes, L.

    2016-12-01

    At the very early stages of a pure strike-slip fault zone formation, shear displacement along a deep buried parent fault produces a characteristic set of "evenly-spaced" strike-slip faults at the surface, e.g. Southern San Andreas, North Anatolian, Central Asian, and Northern Tibetan fault systems. This mode III fracture propagation is initiated by the rotation of the local principal stress at the tip of the parent discontinuity, generating twisted fractures with a helicoidal shape. In sandbox or clay-cake experiments used to reproduce these structures, it has been observed that the spacing and possibly the characteristic length of the fractures appearing at the surface are proportional to the overburden thickness of the deformed layer. Based on a Discrete Element Method (YADE DEM-Open Source), we have investigated the conditions controlling the linear relationships between the spacing of the surface "evenly-spaced" strike-slip discontinuities and the thickness of the deformed layer. Increasing the basement displacement of the model, a diffused shear zone appears first at the tip of the basal parent discontinuity. From this mist zone, localized and strongly interacting shear fractures start to propagate. This interaction process can generate complex internal structures: some fractures will propagate faster than their neighbors, modifying their close surrounding stress environment. Some propagating fractures can stop growing and asymmetrical fracture sets can be observed. This resulting hierarchical bifurcation process leads to a set of "en echelon" discontinuities appearing at the surface (Figure 1). In a pure strike-slip mode, fracture spacing is proportional to the thickness, with a ratio and a bifurcation mode controlled by the cohesion value at the first order. Depending on the Poisson's ratio value, which mainly controls the orientation of the discontinuities, this ratio can be affected at a lower degree. In presence of mixed-mode (transpression or transtension), these linear relationships disappear. Figure 1: Effects of the cohesion C and the thickness T of the deformed layer on the surface discontinuity pattern (a) T = Tref and C = Cref (b) T = Tref and C= 10×Cref (c) T = 2×Tref and C = Cref (d) T = 2×Tref and 10×Cref. The color code corresponds to the instantaneous velocity in the Y direction.

  7. A Heuristic FORTRAN Model of the Identification and Allocation of CONUS (Continental United States) Prime BEEF (Base Engineer Emergency Forces) Forces in Support of Theater OPlan (Operation Plan) Requirements.

    DTIC Science & Technology

    1983-09-01

    and status systems (Albanese, 1981; Griffin, 1982; Lott & Lott, 1971). Group cohesiveness and norms, according to Wallace and Szilagyi (1982), were the... Wallace & Szilagyi , 1982): 1. The major difference between high and low cohesive groups would be how closely members conform to group norms ; and 2. Group...performance would be influenced not only by cohesiveness, but also by the level or strength of group norms. Research by Wallace and Szilagyi (1982

  8. Explaining Couple Cohesion in Different Types of Gay Families

    ERIC Educational Resources Information Center

    van Eeden-Moorefield, Brad; Pasley, Kay; Crosbie-Burnett, Margaret; King, Erin

    2012-01-01

    This Internet-based study used data from a convenience sample of 176 gay men in current partnerships to examine differences in outness, cohesion, and relationship quality between three types of gay male couples: first cohabiting partnerships, repartnerships, and gay stepfamilies. Also, we tested whether relationship quality mediated the link…

  9. Teacher Governance Factors and Social Cohesion: Insights from Pakistan

    ERIC Educational Resources Information Center

    Halai, Anjum; Durrani, Naureen

    2016-01-01

    This paper explores teacher governance factors, particularly recruitment and deployment of teachers, in relation to inequalities and social cohesion. Pakistan introduced major reforms in education in the post 9/11 context of escalating conflict. These include a merit and needs-based policy on teacher recruitment to eliminate corruption in…

  10. Cohesion and Coalition Formation in the European Parliament: Roll-Call Votes and Twitter Activities

    PubMed Central

    Cherepnalkoski, Darko; Karpf, Andreas; Mozetič, Igor; Grčar, Miha

    2016-01-01

    We study the cohesion within and the coalitions between political groups in the Eighth European Parliament (2014–2019) by analyzing two entirely different aspects of the behavior of the Members of the European Parliament (MEPs) in the policy-making processes. On one hand, we analyze their co-voting patterns and, on the other, their retweeting behavior. We make use of two diverse datasets in the analysis. The first one is the roll-call vote dataset, where cohesion is regarded as the tendency to co-vote within a group, and a coalition is formed when the members of several groups exhibit a high degree of co-voting agreement on a subject. The second dataset comes from Twitter; it captures the retweeting (i.e., endorsing) behavior of the MEPs and implies cohesion (retweets within the same group) and coalitions (retweets between groups) from a completely different perspective. We employ two different methodologies to analyze the cohesion and coalitions. The first one is based on Krippendorff’s Alpha reliability, used to measure the agreement between raters in data-analysis scenarios, and the second one is based on Exponential Random Graph Models, often used in social-network analysis. We give general insights into the cohesion of political groups in the European Parliament, explore whether coalitions are formed in the same way for different policy areas, and examine to what degree the retweeting behavior of MEPs corresponds to their co-voting patterns. A novel and interesting aspect of our work is the relationship between the co-voting and retweeting patterns. PMID:27835683

  11. Cohesion and Coalition Formation in the European Parliament: Roll-Call Votes and Twitter Activities.

    PubMed

    Cherepnalkoski, Darko; Karpf, Andreas; Mozetič, Igor; Grčar, Miha

    2016-01-01

    We study the cohesion within and the coalitions between political groups in the Eighth European Parliament (2014-2019) by analyzing two entirely different aspects of the behavior of the Members of the European Parliament (MEPs) in the policy-making processes. On one hand, we analyze their co-voting patterns and, on the other, their retweeting behavior. We make use of two diverse datasets in the analysis. The first one is the roll-call vote dataset, where cohesion is regarded as the tendency to co-vote within a group, and a coalition is formed when the members of several groups exhibit a high degree of co-voting agreement on a subject. The second dataset comes from Twitter; it captures the retweeting (i.e., endorsing) behavior of the MEPs and implies cohesion (retweets within the same group) and coalitions (retweets between groups) from a completely different perspective. We employ two different methodologies to analyze the cohesion and coalitions. The first one is based on Krippendorff's Alpha reliability, used to measure the agreement between raters in data-analysis scenarios, and the second one is based on Exponential Random Graph Models, often used in social-network analysis. We give general insights into the cohesion of political groups in the European Parliament, explore whether coalitions are formed in the same way for different policy areas, and examine to what degree the retweeting behavior of MEPs corresponds to their co-voting patterns. A novel and interesting aspect of our work is the relationship between the co-voting and retweeting patterns.

  12. Slip-localization within confined gouge powder sheared at moderate to high slip-velocity

    NASA Astrophysics Data System (ADS)

    Reches, Zeev; Chen, Xiaofeng; Morgan, Chance; Madden, Andrew

    2015-04-01

    Slip along faults in the upper crust is always associated with comminution and formation of non-cohesive gouge powder that can be lithified to cataclasite. Typically, the fine-grained powders (grain-size < 1 micron) build a 1-10 cm thick inner-core of a fault-zone. The ubiquitous occurrence of gouge powder implies that gouge properties may control the dynamic weakening of faults. Testing these properties is the present objective. We built a Confined ROtary Cell, CROC, with a ring-shape, ~3 mm thick gouge chamber, with 62.5 and 81.2 mm of inner and outer diameters. The sheared powder is sealed by two sets of seals pressurized by nitrogen. In CROC, we can control the pore-pressure and to inject fluids, and to monitor CO2 and H2O concentration; in addition, we monitor the standard mechanical parameters (slip velocity, stresses, dilation, and temperature). We tested six types of granular materials (starting grain-size in microns): Talc (<250), Kasota dolomite (125-250), ooides grains (125-250), San Andreas fault zone powder (< 840), montmorillonite powder (1-2), kaolinite powder and gypsum. The experimental slip-velocity ranged 0.001-1 m/s, slip distances from a few tens of cm to tens of m, effective normal stress up to 6.1 MPa. The central ultra-microscopic (SEM) observation is that almost invariably the slip was localized along principal-slip-zone (PSZ) within the granular layer. Even though the starting material was loose, coarse granular material, the developed PSZ was cohesive, hard, smooth and shining. The PSZ is about 1 micron thick, and built of agglomerated, ultra-fine grains (20-50 nm) that were pulverized from the original granular material. We noted that PSZs of the different tested compositions display similar characteristics in terms of structure, grain size, and roughness. Further, we found striking similarities between PSZ in the granular samples and the PZS that developed along experimental faults made of solid rock that were sheared at similar conditions. The ultra-fine grains and extreme slip localization in these experiments are generally similar to ultra-cataclasites found in exhumed faults-zones, and the intensely pulverized gouge found in drilling across active faults.

  13. Feasibility of Virtual Tablet-Based Group Exercise Among Older Adults in Siberia: Findings From Two Pilot Trials

    PubMed Central

    2018-01-01

    Background Regular physical activity has a positive effect on physical health, well-being, and life satisfaction of older adults. However, engaging in regular physical activity can be challenging for the elderly population because of reduced mobility, low motivation, or lack of the proper infrastructures in their communities. Objective The objective of this paper was to study the feasibility of home-based online group training—under different group cohesion settings—and its effects on adherence and well-being among Russian older adults. We focused particularly on the technology usability and usage and on the adherence to the training (in light of premeasures of social support, enjoyment of physical activity, and leg muscle strength). As a secondary objective, we also explored the effects of the technology-supported intervention on subjective well-being and loneliness. Methods Two pilot trials were carried out exploring two different group cohesion settings (weak cohesion and strong cohesion) in the period from 2015 to 2016 in Tomsk, Russian Federation. A total of 44 older adults (59-83 years) participated in the two pilots and followed a strength and balance training program (Otago) for 8 weeks with the help of a tablet-based virtual gym app. Participants in each pilot were assigned to an interaction condition, representing the online group exercising, and an individual condition, representing a home-based individual training. Both conditions featured persuasion strategies but differed in the ability to socialize and train together. Results Both interaction and individual groups reported a high usability of the technology. Trainees showed a high level of technology acceptance and, particularly, a high score in intention to future use (4.2-5.0 on a 5-point Likert scale). Private texting (short service message [SMS]) was used more than public texting, and the strong cohesion condition resulted in more messages per user. Joint participations to training sessions (copresence) were higher for the social group with higher cohesion. The overall adherence to the training was 74% (SD 27%). Higher levels of social support at baseline were associated with higher adherence in the low cohesion condition (F1,18=5.23, P=.03), whereas in the high cohesion, such association was not found. Overall improvement in the satisfaction with life score was observed between pre and post measures (F1,31=5.85, P=.02), but no decrease in loneliness. Conclusions Online group exercising was proven feasible among healthy independently living older adults in Russia. The pilots suggest that a physical training performed in a virtual environment positively affect the life satisfaction of the trainees, but it does not provide support for a decrease in loneliness. High cohesion groups are preferable for group exercising, especially to mitigate effects of low social support on adherence. Further research in motivating group interactions in training settings is needed. PMID:29487045

  14. Developing Team Cohesion: A Quasi-Field Experiment

    DTIC Science & Technology

    2004-03-01

    social cohesion and task cohesion which may be very different and often produced opposite effects. Carless and Depaola (2000) defined task cohesion as... Social cohesion was defined as the motivation to develop and retain social interaction within the group. Whether cohesion is studied as one construct...that task cohesion and social cohesion have differing effects on performance. Mullen and Cooper (1994) showed that task cohesion had a positive

  15. Simulation of fatigue damage in ferroelectric polycrystals under mechanical/electrical loading

    NASA Astrophysics Data System (ADS)

    Kozinov, S.; Kuna, M.

    2018-07-01

    The reliability of smart-structures made of ferroelectric ceramics is essentially reduced by the formation of cracks under the action of external electrical and/or mechanical loading. In the current research a numerical model for low-cycle fatigue in ferroelectric mesostructures is proposed. In the finite element simulations a combination of two user element routines is utilized. The first one is used to model a micromechanical ferroelectric domain switching behavior inside the grains. The second one is used to simulate fatigue damage of grain boundaries by a cohesive zone model (EMCCZM) based on an electromechanical cyclic traction-separation law (TSL). For numerical simulations a scanning electron microscope image of the ceramic's grain structure was digitalized and meshed. The response of this mesostructure to cyclic electrical or mechanical loading is systematically analyzed. As a result of the simulations, the distribution of electric potential, field, displacement and polarization as well as mechanical stresses and deformations inside the grains are obtained. At the grain boundaries, the formation and evolution of damage are analyzed until final failure and induced degradation of electric permittivity. It is found that the proposed model correctly mimics polycrystalline behavior during poling processes and progressive damage under cyclic electromechanical loading. To the authors' knowledge, it is the first model and numerical analysis of ferroelectric polycrystals taking into account both domain reorientation and cohesive modeling of intergranular fracture. It can help to understand failure mechanisms taking place in ferroelectrics during fatigue processes.

  16. Evaluating Text Complexity and Flesch-Kincaid Grade Level

    ERIC Educational Resources Information Center

    Solnyshkina, Marina I.; Zamaletdinov, Radif R.; Gorodetskaya, Ludmila A.; Gabitov, Azat I.

    2017-01-01

    The article presents the results of an exploratory study of the use of T.E.R.A., an automated tool measuring text complexity and readability based on the assessment of five text complexity parameters: narrativity, syntactic simplicity, word concreteness, referential cohesion and deep cohesion. Aimed at finding ways to utilize T.E.R.A. for…

  17. Sense of Cohesion among Community Activists Engaging in Volunteer Activity

    ERIC Educational Resources Information Center

    Levy, Drorit; Itzhaky, Haya; Zanbar, Lea; Schwartz, Chaya

    2012-01-01

    The present article attempts to shed light on the direct and indirect contribution of personal resources and community indices to Sense of Cohesion among activists engaging in community volunteer work. The sample comprised 481 activists. Based on social systems theory, three levels of variables were examined: (1) inputs, which included personal…

  18. First-principles study of the effect of phosphorus on nickel grain boundary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Wenguan; Ren, Cuilan; Han, Han, E-mail: hanhan@sinap.ac.cn, E-mail: xuhongjie@sinap.ac.cn

    2014-01-28

    Based on first-principles quantum-mechanical calculations, the impurity-dopant effects of phosphorus on Σ5(012) symmetrical tilt grain boundary in nickel have been studied. The calculated binding energy suggests that phosphorus has a strong tendency to segregate to the grain boundary. Phosphorus forms strong and covalent-like bonding with nickel, which is beneficial to the grain boundary cohesion. However, a too high phosphorus content can result in a thin and fragile zone in the grain boundary, due to the repulsion between phosphorus atoms. As the concentration of phosphorus increases, the strength of the grain boundary increases first and then decreases. Obviously, there exists anmore » optimum concentration for phosphorus segregation, which is consistent with observed segregation behaviors of phosphorus in the grain boundary of nickel. This work is very helpful to understand the comprehensive effects of phosphorus.« less

  19. Finite element analysis when orthogonal cutting of hybrid composite CFRP/Ti

    NASA Astrophysics Data System (ADS)

    Xu, Jinyang; El Mansori, Mohamed

    2015-07-01

    Hybrid composite, especially CFRP/Ti stack, is usually considered as an innovative structural configuration for manufacturing the key load-bearing components in modern aerospace industry. This paper originally proposed an FE model to simulate the total chip formation process dominated the hybrid cutting operation. The hybrid composite model was established based on three physical constituents, i.e., Ti constituent, interface and CFRP constituent. Different constitutive models and damage criteria were introduced to replicate the interrelated cutting behaviour of the stack material. The CFRP/Ti interface was modelled as a third phase through the concept of cohesive zone (CZ). Particular attention was made on the comparative studies of the influence of different cutting-sequence strategies on the machining responses induced in hybrid stack cutting. The numerical results emphasized the pivotal role of cutting-sequence strategy on the various machining induced responses including cutting-force generation, machined surface quality and induced interface damage.

  20. Cohesiveness in Financial News and its Relation to Market Volatility

    PubMed Central

    Piškorec, Matija; Antulov-Fantulin, Nino; Novak, Petra Kralj; Mozetič, Igor; Grčar, Miha; Vodenska, Irena; Šmuc, Tomislav

    2014-01-01

    Motivated by recent financial crises, significant research efforts have been put into studying contagion effects and herding behaviour in financial markets. Much less has been said regarding the influence of financial news on financial markets. We propose a novel measure of collective behaviour based on financial news on the Web, the News Cohesiveness Index (NCI), and we demonstrate that the index can be used as a financial market volatility indicator. We evaluate the NCI using financial documents from large Web news sources on a daily basis from October 2011 to July 2013 and analyse the interplay between financial markets and finance-related news. We hypothesise that strong cohesion in financial news reflects movements in the financial markets. Our results indicate that cohesiveness in financial news is highly correlated with and driven by volatility in financial markets. PMID:24849598

  1. Particle Engineering Via Mechanical Dry Coating in the Design of Pharmaceutical Solid Dosage Forms.

    PubMed

    Qu, Li; Morton, David A V; Zhou, Qi Tony

    2015-01-01

    Cohesive powders are problematic in the manufacturing of pharmaceutical solid dosage forms because they exhibit poor flowability, fluidization and aerosolization. These undesirable bulk properties of cohesive powders represent a fundamental challenge in the design of efficient pharmaceutical manufacturing processes. Recently, mechanical dry coating has attracted increasing attention as it can improve the bulk properties of cohesive powders in a cheaper, simpler, safer and more environment-friendly way than the existing solvent-based counterparts. In this review, mechanical dry coating techniques are outlined and their potential applications in formulation and manufacturing of pharmaceutical solid dosage forms are discussed. Reported data from the literature have shown that mechanical dry coating holds promise for the design of superior pharmaceutical solid formulations or manufacturing processes by engineering the interfaces of cohesive powders in an efficient and economical way.

  2. Examining Neighborhood Social Cohesion in the Context of Community-based Participatory Research: Descriptive Findings from an Academic-Community Partnership.

    PubMed

    Bateman, Lori Brand; Fouad, Mona N; Hawk, Bianca; Osborne, Tiffany; Bae, Sejong; Eady, Sequoya; Thompson, Joanice; Brantley, Wendy; Crawford, Lovie; Heider, Laura; Schoenberger, Yu-Mei M

    2017-01-01

    The purpose of this article is to describe the process of conducting an assessment of neighborhood perceptions and cohesion by a community coalition-academic team created in the context of community-based participatory research (CBPR), to guide the design of locally relevant health initiatives. Guided by CBPR principles, a collaborative partnership was established between an academic center and a local, urban, underserved neighborhood in Birmingham, Alabama to identify and address community concerns and priorities. A cross-sectional survey was conducted in September 2016 among community residents (N=90) to examine perceptions of neighborhood characteristics, including social cohesion and neighborhood problems. The major concerns voiced by the coalition were violence and lack of neighborhood cohesion and safety. The community survey verified the concerns of the coalition, with the majority of participants mentioning increasing safety and stopping the violence as the things to change about the community and the greatest hope for the community. Furthermore, results indicated residents had a moderate level of perceived social cohesion (mean = 2.87 [.67]). The Mid-South TCC Academic and Community Engagement (ACE) Core successfully partnered with community members and stakeholders to establish a coalition whose concerns and vision for the community matched the concerns of residents of the community. Collecting data from different groups strengthened the interpretation of the findings and allowed for a rich understanding of neighborhood concerns.

  3. Displacement, county social cohesion, and depression after a large-scale traumatic event.

    PubMed

    Lê, Félice; Tracy, Melissa; Norris, Fran H; Galea, Sandro

    2013-11-01

    Depression is a common and potentially debilitating consequence of traumatic events. Mass traumatic events cause wide-ranging disruptions to community characteristics, influencing the population risk of depression. In the aftermath of such events, population displacement is common. Stressors associated with displacement may increase risk of depression directly. Indirectly, persons who are displaced may experience erosion in social cohesion, further exacerbating their risk for depression. Using data from a population-based cross-sectional survey of adults living in the 23 southernmost counties of Mississippi (N = 708), we modeled the independent and joint relations of displacement and county-level social cohesion with depression 18-24 months after Hurricane Katrina. After adjustment for individual- and county-level socio-demographic characteristics and county-level hurricane exposure, joint exposure to both displacement and low social cohesion was associated with substantially higher log-odds of depression (b = 1.34 [0.86-1.83]). Associations were much weaker for exposure only to low social cohesion (b = 0.28 [-0.35-0.90]) or only to displacement (b = 0.04 [-0.80-0.88]). The associations were robust to additional adjustment for individually perceived social cohesion and social support. Addressing the multiple, simultaneous disruptions that are a hallmark of mass traumatic events is important to identify vulnerable populations and understand the psychological ramifications of these events.

  4. Group cohesion in foraging meerkats: follow the moving 'vocal hot spot'.

    PubMed

    Gall, Gabriella E C; Manser, Marta B

    2017-04-01

    Group coordination, when 'on the move' or when visibility is low, is a challenge faced by many social living animals. While some animals manage to maintain cohesion solely through visual contact, the mechanism of group cohesion through other modes of communication, a necessity when visual contact is reduced, is not yet understood. Meerkats ( Suricata suricatta ), a small, social carnivore, forage as a cohesive group while moving continuously. While foraging, they frequently emit 'close calls', soft close-range contact calls. Variations in their call rates based on their local environment, coupled with individual movement, produce a dynamic acoustic landscape with a moving 'vocal hotspot' of the highest calling activity. We investigated whether meerkats follow such a vocal hotspot by playing back close calls of multiple individuals to foraging meerkats from the front and back edge of the group simultaneously. These two artificially induced vocal hotspots caused the group to spatially elongate and split into two subgroups. We conclude that meerkats use the emergent dynamic call pattern of the group to adjust their movement direction and maintain cohesion. Our study describes a highly flexible mechanism for the maintenance of group cohesion through vocal communication, for mobile species in habitats with low visibility and where movement decisions need to be adjusted continuously to changing environmental conditions.

  5. Does decentralisation enhance a school's role of promoting social cohesion? Bosnian school leaders' perceptions of school governance

    NASA Astrophysics Data System (ADS)

    Komatsu, Taro

    2014-05-01

    This study seeks to understand whether and how decentralised school governance in Bosnia and Herzegovina (BiH) enhances the schools' role of promoting social cohesion. This includes increasing "horizontal" trust among different ethnic groups and "vertical" trust between civilians and public institutes. The study examined secondary school leaders' perceptions regarding school board influence on social cohesion policies and practices, their interactions with school board members, and their accountability to the school-based governing body. The results show that school leaders and school boards, supposedly representing the interests of local stakeholders, did not appear to be actively engaged in the deliberate process of promoting social cohesion. While school directors tended to view themselves as being independent from the school boards, ethnically diverse school boards provided important support to proactive school leaders for their inter-group activities. Given that the central level is not providing initiatives to promote social cohesion and that BiH citizens appear to generally support social cohesion, decentralised school governance has the potential to improve social trust from the bottom up. To promote participatory school governance, the study recommends that BiH school leaders should be provided with opportunities to re-examine and redefine their professional accountability and to assist local stakeholders to improve their involvement in school governance.

  6. Modeling the Evolution of Localized Strain in Orogenic Wedges: From Short-term Deformation to Long-term Tectonic States

    NASA Astrophysics Data System (ADS)

    Weiss, J. R.; Ito, G.; Brooks, B. A.; Olive, J. A. L.; Foster, J. H.; Howell, S. M.

    2015-12-01

    Some of the most destructive earthquakes on Earth are associated with active orogenic wedges. Despite a sound understanding of the basic mechanics that govern whole wedge structure over geologic time scales and a growing body of studies that have characterized the deformation associated with historic to recent earthquakes, first order questions remain about the linkage of the two sets of processes at the intermediate seismotectonic timescales. Numerical models have the power to test the effects of specific mechanical conditions on the evolution of observables at active orogenic wedges. Here we use a two-dimensional, continuum mechanics-based, finite difference method with a visco-elasto-plastic rheology coupled with surface processes to investigate the spatiotemporal distribution of deformation during wedge growth. The model simulates the contraction of a crustal layer overlying a weak base (décollement) against a rigid backstop and the spontaneous nucleation and evolution of fault zones due to cohesive, Mohr-Coulomb failure with strain weakening. Consistent with critical wedge theory, the average slope across the wedge is controlled by the relative frictional strengths of the wedge and décollement. Initial calculations predict changes in wedge deformation on short geologic timescales (103-105yrs) that involve episodes of widening as new, foreland-verging thrusts nucleate near the surface beyond the wedge toe and propagate down-dip to intersect the décollement. All the while, the wedge thickens via slip on older, internal fault zones. The aim of this study is to identify the parameters controlling the timescales of 1) episodic widening versus thickening and 2) nucleation and life-span of individual fault zones. These are initial steps needed to link earthquake observations to the long-term tectonic states inferred at various orogenic belts around the world.

  7. Mechanical behaviour of staggered array of mineralised collagen fibrils in protein matrix: Effects of fibril dimensions and failure energy in protein matrix.

    PubMed

    Lai, Zheng Bo; Yan, Cheng

    2017-01-01

    Many biological composite materials such as bone have demonstrated unique mechanical performance, i.e., a combination of superior stiffness and toughness. It has become increasingly clear that the constituents at the nano- and micro-length scales play a critical role in determining the mechanical performance of these biological composites. In this study, the underlying mechanisms governing the mechanical behaviour of the staggered array of mineralised collagen fibrils (MCF) embedded in extra-fibrillar protein matrix were numerically investigated. The evolution of damage zone in protein was estimated using cohesive zone models (CZM). The results indicate that the mechanisms and mechanical behaviour of MCF array are largely dependent on the MCF dimensions and the intrinsic failure energy in extra-fibrillar protein matrix. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Group cohesion and nurse satisfaction: examination of a team-building approach.

    PubMed

    DiMeglio, Karen; Padula, Cynthia; Piatek, Carolyn; Korber, Susan; Barrett, Ann; Ducharme, Maria; Lucas, Sandra; Piermont, Nicole; Joyal, Elaine; DeNicola, Virginia; Corry, Karen

    2005-03-01

    The purpose of this study was to determine the impact of a team-building intervention on group cohesion, nurse satisfaction, and turnover rates. Creating an environment that supports and retains nurses represents a formidable challenge for nursing leaders. Research related to strategies that positively impact the culture in which nurses practice, thus potentially improving nurse satisfaction and reducing turnover, is critically needed. Registered nurses (RNs) employed on inpatient units in a 247-bed, private acute care Magnet teaching hospital participated in this quasi experimental preintervention and postintervention design. The RN-RN interaction subscale from the National Database of Nursing Quality Indicators Adapted Index of Work Satisfaction, the National Database of Nursing Quality Indicators Adapted Index of Job Enjoyment, the Group Cohesion Scale, and a facilitator-developed measure were completed preimplementation and postimplementation of unit-tailored intervention strategies, which took place over a 12-month period. Turnover rates were collected 6 month preintervention and postintervention. Improvement in group cohesion, RN-RN interaction, job enjoyment, and turnover was demonstrated. Targeted, unit-based strategies can be an effective means of reducing turnover rates and improving group cohesion and nurse satisfaction.

  9. Interpersonal learning is associated with improved self-esteem in group psychotherapy for women with binge eating disorder.

    PubMed

    Gallagher, Meagan E; Tasca, Giorgio A; Ritchie, Kerri; Balfour, Louise; Maxwell, Hilary; Bissada, Hany

    2014-03-01

    Yalom and Leszcz (2005) indicated that interpersonal learning is a key therapeutic factor in group psychotherapy. In this study, we conceptualized interpersonal learning as the convergence over time between an individual's and the group's perception of the individual's cohesion to the group. First, we developed parallel measures of: (a) an individual's self-rated cohesion to the group (Cohesion Questionnaire-Individual Version [CQ-I]), and (b) the group's rating of the individual's cohesion to the group (CQ-G) based on the original Cohesion Questionnaire (CQ; Piper, Marache, Lacroix, Richardsen, & Jones, 1983). Second, we used these parallel scales to assess differences between an individual's self-rating and the mean of the group's ratings of the individual's cohesion to the group. Women with binge eating disorder (N = 102) received Group Psychodynamic Interpersonal Psychotherapy. Participants were assigned to homogeneously composed groups of either high or low attachment anxiety. Outcomes were measured pre- and post-treatment, and the CQ-I and CQ-G were administered every fourth group session. We found significant convergence over time between the CQ-I and mean CQ-G scale scores in both attachment anxiety conditions. Participants with higher attachment anxiety had lower individual self-ratings of cohesion and had greater discrepancies between the CQ-I and CG-G compared with those with lower attachment anxiety. There was a significant relationship between greater convergence in cohesion ratings and improved self-esteem at post-treatment. More accurate self-perceptions through feedback from group members may be a key factor in facilitating increased self-esteem in group therapy. Group therapists may facilitate such interpersonal learning, especially for those higher in attachment anxiety, by noting discrepancies and then encouraging convergence between an individual and the group in their perceptions of cohesion to the group. (c) 2014 APA, all rights reserved.

  10. The Potential of Automated Corrective Feedback to Remediate Cohesion Problems in Advanced Students' Writing

    ERIC Educational Resources Information Center

    Strobl, Carola

    2017-01-01

    This study explores the potential of a feedback environment using simple string-based pattern matching technology for the provision of automated corrective feedback on cohesion problems. Thirty-eight high-frequent problems, including non-target like use of connectives and co-references were addressed providing both direct and indirect feedback.…

  11. The Use of Cohesive Markers in Narratives by Children with Williams Syndrome

    ERIC Educational Resources Information Center

    Jones, Nancy Elizabeth

    2013-01-01

    This study examined how children and adolescents with Williams syndrome (WS; ages 8 years, 0 months [8;0]-14;5) used referential devices (determiners and pronouns), tense, and connectives to create cohesion in oral narratives based on a storybook compared to typically developing mentally and chronologically age-matched children. WS children used…

  12. DEM study on the interaction between wet cohesive granular materials and tools

    NASA Astrophysics Data System (ADS)

    Tsuji, Takuya; Matsui, Yu; Nakagawa, Yuta; Kadono, Yuuichi; Tanaka, Toshitsugu

    2013-06-01

    A model based on discrete element method has been developed for the interaction between wet cohesive granular materials and mechanical tools with complex geometry. To obtain realistic results, the motion of 52.5 million particles has been simulated and the formation of multiple shear bands during an excavation process by a bulldozer blade was observed.

  13. Cross-Cultural Adjustment Process of Expatriate Families in a Multinational Organization: A Family System Theory Perspective

    ERIC Educational Resources Information Center

    Rosenbusch, Katherine

    2010-01-01

    The purpose of this survey based study was to examine whether the characteristics (i.e., flexibility and cohesion) of expatriate families in a multinational corporation as measured by the Family Adaptability and Cohesion Evaluation Scale can predict cross-cultural adjustment of the expatriate (individual level of analysis) and his/her family…

  14. Loss Estimation Modeling Of Scenario Lahars From Mount Rainier, Washington State, Using HAZUS-MH

    NASA Astrophysics Data System (ADS)

    Walsh, T. J.; Cakir, R.

    2011-12-01

    We have adapted lahar hazard zones developed by Hoblitt and others (1998) and converted to digital data by Schilling and others (2008) into the appropriate format for HAZUS-MH, which is FEMA's loss estimation model. We assume that structures engulfed by cohesive lahars will suffer complete loss, and structures affected by post-lahar flooding will be appropriately modeled by the HAZUS-MH flood model. Another approach investigated is to estimate the momentum of lahars, calculate a lateral force, and apply the earthquake model, substituting the lahar lateral force for PGA. Our initial model used the HAZUS default data, which include estimates of building type and value from census data. This model estimated a loss of about 12 billion for a repeat lahar similar to the Electron Mudflow down the Puyallup River. Because HAZUS data are based on census tracts, this estimated damage includes everything in the census tract, even buildings outside of the lahar hazard zone. To correct this, we acquired assessors data from all of the affected counties and converted them into HAZUS format. We then clipped it to the boundaries of the lahar hazard zone to more precisely delineate those properties actually at risk in each scenario. This refined our initial loss estimate to about 6 billion with exclusion of building content values. We are also investigating rebuilding the lahar hazard zones applying Lahar-Z to a more accurate topographic grid derived from recent Lidar data acquired from the Puget Sound Lidar Consortium and Mount Rainier National Park. Final results of these models for the major drainages of Mount Rainier will be posted to the Washington Interactive Geologic Map (http://www.dnr.wa.gov/ResearchScience/Topics/GeosciencesData/Pages/geology_portal.aspx).

  15. Subcutaneous Fascial Bands—A Qualitative and Morphometric Analysis

    PubMed Central

    Li, Weihui; Ahn, Andrew C.

    2011-01-01

    Background Although fascial bands within the subcutaneous (SQ) layer are commonly seen in ultrasound images, little is known about their functional role, much less their structural characteristics. This study's objective is to describe the morphological features of SQ fascial bands and to systematically evaluate the bands using image analyses tools and morphometric measures. Methods In 28 healthy volunteers, ultrasound images were obtained at three body locations: the lateral aspect of the upper arm, medial aspect of the thigh and posterior aspect of lower leg. Using image analytical techniques, the total SQ band area, fascial band number, fascial band thickness, and SQ zone (layer) thickness were determined. In addition, the SQ spatial coherence was calculated based on the eigenvalues associated with the largest and smallest eigenvectors of the images. Results Fascial bands at these sites were contiguous with the dermis and the epimysium forming an interconnected network within the subcutaneous tissue. Subcutaneous blood vessels were also frequently encased by these fascial bands. The total SQ fascial band area was greater at the thigh and calf compared to the arm and was unrelated to SQ layer (zone) thickness. The thigh was associated with highest average number of fascial bands while calf was associated with the greatest average fascial band thickness. Across body regions, greater SQ zone thickness was associated with thinner fascial bands. SQ coherence was significantly associated with SQ zone thickness and body location (calf with statistically greater coherence compared to arm). Conclusion Fascial bands are structural bridges that mechanically link the skin, subcutaneous layer, and deeper muscle layers. This cohesive network also encases subcutaneous vessels and may indirectly mediate blood flow. The quantity and morphological characteristics of the SQ fascial band may reflect the composite mechanical forces experienced by the body part. PMID:21931632

  16. Microscale characterization of metallic coatings for a high strength high conductivity copper alloy

    NASA Astrophysics Data System (ADS)

    Jain, Piyush

    NiCrAlY overlay coatings are being considered by NASA's Glenn Research Center to prevent blanching and reduce thermo-mechanical fatigue of rocket engine combustion chamber liners made of GRCop-84 (Cu-8%Cr-4%Nb) for reusable launch vehicles (RLVs). However, their successful application depends upon their integrity to the GRCop-84 during multiple firings of rocket engines. This study focuses on determining the adhesion of NiCrAlY coatings and their microstructural stability on GRCop-84 as a function of thermal cycling. Specimens were prepared by depositing NiCrAlY top coat on GRCop-84 by vacuum plasma spaying with a thin layer of Cu-26Cr as a bond coat. A thermal cycling rig was built to thermally cycle the NiCrAlY/Cu-26Cr/GRCop-84 specimens from RT to 600°C in an argon environment, with 10 minutes hold at 600°C, and 4 minutes hold at RT. Samples were cut from the coupons in as-received condition (AR), after 100 thermal cycles (TC-100), and after 300 thermal cycles (TC-300) for characterization. A newly developed interfacial microsample testing technique was employed to determine the adhesion of the coatings on GRCop-84, where bowtie shaped microsamples having interfaces normal to the tensile axis were tested. Interfacial microsamples of NiCrAlY/Cu-26Cr/GRCop-84 in all the conditions (AR, TC-100, and TC-300) failed cohesively in the substrate at a UTS of 380+/-5 MPa and their interfaces remained intact. The microstructural characterization revealed that microstructure of the NiCrAlY/Cu-26Cr/GRCop-84 specimens does not degrade as a function of thermal cycling. Constitutive properties of NiCrAlY, Cu-26Cr, and GRCop-84 were measured by testing monolithic samples and were used to build the finite element model (FEM) of the interfacial microsamples. The FE model analyzed the local stress-strain in the interfacial microsamples during the testing and confirmed the strength of the interfaces to be higher than 380+/-5 MPa. Depleted zones, devoid of Cr2Nb particles, were observed in the substrate near the interface, which has been attributed to uncontrolled processing parameters during the coating deposition. The interfacial microsamples containing depleted zones, failed at 335+/-25 MPa in AR condition exhibiting cohesive-adhesive failure, and at 360+/-15 MPa in TC-300 condition exhibiting adhesive failure. All these results suggested that the presence of depleted zone decreases the adhesion of the coating and should be avoided in future coatings deposition. Adhesion of two top coats, NiCrAlY (with the Cu-26Cr bond coat) and the Cu-26Cr (without any bond coat), were found to be lower on the grit blasted GRCop-84 than on the polished GRCop-84. The adhesion of both the top coats on polished GRCop-84 was measured to be 380+/-5 MPa with cohesive failure in the substrate, while the adhesion of NiCrAlY top coat on the grit blasted GRCop-84 was measured to be 142+/-35 MPa with cohesive failure in the Cu-26Cr bond coat, and the adhesion of Cu-26Cr top coat on the grit blasted GRCop-84 was measured to be 360+/-25 MPa with cohesive failure in the Cu-26Cr top coat. The microstructural characterization revealed that the reason of lower strength of top coats on the grit blasted GRCop-84 was the porosity present in the coatings on the grit blasted GRCop-84, while the coatings on the polished GRCop-84 did not have any measurable porosity.

  17. Emotional ties that bind: the roles of valence and consistency of group emotion in inferences of cohesiveness and common fate.

    PubMed

    Magee, Joe C; Tiedens, Larissa Z

    2006-12-01

    In three studies, observers based inferences about the cohesiveness and common fate of groups on the emotions expressed by group members. The valence of expressions affected cohesiveness inferences, whereas the consistency of expressions affected inferences of whether members have common fate. These emotion composition effects were stronger than those due to the race or sex composition of the group. Furthermore, the authors show that emotion valence and consistency are differentially involved in judgments about the degree to which the group as a whole was responsible for group performance. Finally, it is demonstrated that valence-cohesiveness effects are mediated by inferences of interpersonal liking and that consistency-common fate effects are mediated by inferences of psychological similarity. These findings have implications for the literature on entitativity and regarding the function of emotions in social contexts.

  18. The Role of Adolescent Friendship Group Integration and Cohesion in Weapon-Related Violent Crime as a Young Adult.

    PubMed

    Mundt, Marlon P; Antonaccio, Olena P; French, Michael T; Zakletskaia, Larissa I

    2017-08-01

    Weapon-related violent crime is a serious, complex, and multifaceted public health problem. The present study uses data from Waves I and III of Add Health (n = 10,482, 54% female) to examine how friendship group integration and cohesion in adolescence (ages 12-19) is associated with weapon-related criminal activity as a young adult (ages 18-26). Results indicate that greater cohesion in friendship groups is associated with significantly lower weapon-related criminal activity in young adulthood. In addition, for adolescent girls, a greater number of close friendship ties-an indicator of friendship group integration-is associated with less weapon-related criminal activity in young adulthood. These findings suggest that school-based initiatives to facilitate inclusive and cohesive adolescent peer communities may be an effective strategy to curb weapon-related criminal activity in young adulthood.

  19. Spatializing Open Data for the Assessment and the Improvement of Territorial and Social Cohesion

    NASA Astrophysics Data System (ADS)

    Scorza, F.; Las Casas, G. B.; Murgante, B.

    2016-09-01

    An integrated place-based approach for the improvement of territorial and social cohesion is the new instance for planning disciplines, coming from EU New Cohesion Policies. This paper considers the territorial impact assessment of regional development policies as a precondition in order to develop balanced and effective operative programs at national and regional levels. The contribution of `open data' appears to be mature in order to support this application and in this paper we present a spatial analysis technique for the evaluation of EU funds effects at territorial level, starting from open data by Open Cohesion. The application is focused on internal areas of Basilicata Region: Agri river Valley. A complex contest, where environmental and agricultural traditional vocations conflict with a recent development of oil extraction industries. Conclusions concern further applications and perspectives to improve and support regional development planning considering the exploitation of open data sources and spatial analysis.

  20. It is Time to Rescind Don’t Ask, Don’t Tell

    DTIC Science & Technology

    2009-04-02

    cohesion and that in turn would affect accomplishing the mission. A study done at UC, Davis, makes a distinction between social cohesion and task...cohesion.22 Social cohesion is the nature and quality of emotional bonds of friendship, closeness, etc. and task cohesion is a shared commitment among...studies of cohesion and performance it is task cohesion, not social cohesion or group pride that drives group performance. Professor MacCoun also

  1. Atomistically derived cohesive zone model of intergranular fracture in polycrystalline graphene

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guin, Laurent; Department of Mechanical Engineering, Columbia University, New York, New York 10027; Raphanel, Jean L.

    2016-06-28

    Pristine single crystal graphene is the strongest known two-dimensional material, and its nonlinear anisotropic mechanical properties are well understood from the atomic length scale up to a continuum description. However, experiments indicate that grain boundaries in the polycrystalline form reduce the mechanical behavior of polycrystalline graphene. Herein, we perform atomistic-scale molecular dynamics simulations of the deformation and fracture of graphene grain boundaries and express the results as continuum cohesive zone models (CZMs) that embed notions of the grain boundary ultimate strength and fracture toughness. To facilitate energy balance, we employ a new methodology that simulates a quasi-static controlled crack propagationmore » which renders the kinetic energy contribution to the total energy negligible. We verify good agreement between Griffith's critical energy release rate and the work of separation of the CZM, and we note that the energy of crack edges and fracture toughness differs by about 35%, which is attributed to the phenomenon of bond trapping. This justifies the implementation of the CZM within the context of the finite element method (FEM). To enhance computational efficiency in the FEM implementation, we discuss the use of scaled traction-separation laws (TSLs) for larger element sizes. As a final result, we have established that the failure characteristics of pristine graphene and high tilt angle bicrystals differ by less than 10%. This result suggests that one could use a unique or a few typical TSLs as a good approximation for the CZMs associated with the mechanical simulations of the polycrystalline graphene.« less

  2. Simulation of primary-slag melting behavior in the cohesive zone of a blast furnace, considering the effect of Al{sub 2}O{sub 3}, Fe{sub t}O, and basicity in the sinter ore

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hino, Mitsutaka; Nagasaka, Tetsuya; Katsumata, Akitoshi

    1999-08-01

    The alumina content in the iron ore imported to Japan is increasing year by year, and some problems in blast furnace operation, due to the use of the high-alumina-containing sinter, have already been reported. In order to clarify the mechanism of the harmful effect of alumina on the blast furnace operation, the behavior of the primary melt, which is formed in the sinter at the cohesive zone of the blast furnace, has been simulated by dripping slag through an iron or oxide funnel. The effects of basicity, Al{sub 2}O{sub 3}, and Fe{sub t}O contents in the five slag systems onmore » the dripping temperature and weight of slag remaining on the funnel have been discussed. It was found that the eutectic melt formed in the sinter would play an important role in the dripping behavior of the slag in the blast furnace through the fine porosity of the reduced iron and ore particles. Al{sub 2}O{sub 3} increased the weight of the slag remaining on the funnel, and its effect became very significant in the acidic and low-Fe{sub t}O-containing slag. It was estimated that the increase of the weight of the slag remaining on the funnel by Al{sub 2}O{sub 3} in the ore could result in a harmful effect on the permeability resistance and an indirect reduction rate of the sinter in the blast furnace.« less

  3. BinTree Seeking: A Novel Approach to Mine Both Bi-Sparse and Cohesive Modules in Protein Interaction Networks

    PubMed Central

    Shen, Hong-Bin

    2011-01-01

    Modern science of networks has brought significant advances to our understanding of complex systems biology. As a representative model of systems biology, Protein Interaction Networks (PINs) are characterized by a remarkable modular structures, reflecting functional associations between their components. Many methods were proposed to capture cohesive modules so that there is a higher density of edges within modules than those across them. Recent studies reveal that cohesively interacting modules of proteins is not a universal organizing principle in PINs, which has opened up new avenues for revisiting functional modules in PINs. In this paper, functional clusters in PINs are found to be able to form unorthodox structures defined as bi-sparse module. In contrast to the traditional cohesive module, the nodes in the bi-sparse module are sparsely connected internally and densely connected with other bi-sparse or cohesive modules. We present a novel protocol called the BinTree Seeking (BTS) for mining both bi-sparse and cohesive modules in PINs based on Edge Density of Module (EDM) and matrix theory. BTS detects modules by depicting links and nodes rather than nodes alone and its derivation procedure is totally performed on adjacency matrix of networks. The number of modules in a PIN can be automatically determined in the proposed BTS approach. BTS is tested on three real PINs and the results demonstrate that functional modules in PINs are not dominantly cohesive but can be sparse. BTS software and the supporting information are available at: www.csbio.sjtu.edu.cn/bioinf/BTS/. PMID:22140454

  4. Levels of Community Cohesion: Theorizing the UK Agenda and the Implications for Policy and Practice in Schools

    ERIC Educational Resources Information Center

    Parker-Jenkins, Marie; Glenn, Meli

    2011-01-01

    This paper explores the concept of "community engagement," a central theme within a British research project examining the issues of cultural sustainability among faith-based schools. Discussion is informed by the views of Muslim and Jewish school community stakeholders at the time when the policy of social cohesion was being legally…

  5. Does Emotional Intelligence Change during Medical School Gross Anatomy Course? Correlations with Students' Performance and Team Cohesion

    ERIC Educational Resources Information Center

    Holman, Michelle A.; Porter, Samuel G.; Pawlina, Wojciech; Juskewitch, Justin E.; Lachman, Nirusha

    2016-01-01

    Emotional intelligence (EI) has been associated with increased academic achievement, but its impact on medical education is relatively unexplored. This study sought to evaluate change in EI, performance outcomes, and team cohesion within a team-based medical school anatomy course. Forty-two medical students completed a pre-course and post-course…

  6. Survey of Quantification and Distance Functions Used for Internet-based Weak-link Sociological Phenomena

    DTIC Science & Technology

    2013-01-16

    linkages, as well as the social strong and weak ties, social cohesion , position and distance. See Appendix II. 8) The co-PI was willing to write it out...Dawn Robinson, A Summary of Sociological Concepts Related to Social Network and Its Techniques for Quantifying Social Cohesion , Social Position, Social Distance, a manuscript, 2013. 3

  7. Displacement, county social cohesion and depression after a large-scale traumatic event

    PubMed Central

    Lê, Félice; Tracy, Melissa; Norris, Fran H.; Galea, Sandro

    2013-01-01

    Background Depression is a common and potentially debilitating consequence of traumatic events. Mass traumatic events cause wide-ranging disruptions to community characteristics, influencing the population risk of depression. In the aftermath of such events, population displacement is common. Stressors associated with displacement may increase risk of depression directly. Indirectly, persons who are displaced may experience erosion in social cohesion, further exacerbating their risk for depression. Methods Using data from a population-based cross-sectional survey of adults living in the 23 southernmost counties of Mississippi (N = 708), we modeled the independent and joint relations of displacement and county-level social cohesion with depression 18–24 months after Hurricane Katrina. Results After adjustment for individual- and county-level sociodemographic characteristics and county-level hurricane exposure, joint exposure to both displacement and low social cohesion was associated with substantially higher log-odds of depression (b = 1.34 [0.86–1.83]). Associations were much weaker for exposure only to low social cohesion (b = 0.28 [−0.35–0.90]) or only to displacement (b = 0.04 [−0.80– 0.88]). The associations were robust to additional adjustment for individually perceived social cohesion and social support. Conclusion Addressing the multiple, simultaneous disruptions that are a hallmark of mass traumatic events is important to identify vulnerable populations and understand the psychological ramifications of these events. PMID:23644724

  8. Cohesion as a Command Emphasis Item

    DTIC Science & Technology

    2010-03-01

    of the notion of cohesion— social cohesion . Social cohesion is the affective bonding between members; or to expound further, the interpersonal...team to achieve that goal. 3 Members with high task cohesion do not necessarily share high social cohesion . The reason this distinction is...important is due to the fact that when thinking in terms of cohesion, most leaders think of it in terms of social cohesion . Unfortunately, studies of the

  9. Implications of Integrating Women into the Marine Corps Infantry

    DTIC Science & Technology

    2015-12-01

    findings and implications from our study. Research on Cohesion In general, prior research demonstrates that more cohesive groups perform better than less...woman in the group ,1 but the optimal proportion of women for group cohesion is not clear from the existing research . Finally, there are cohesion...that integration might have on group cohesion. This is for good reason: research on group cohesion has demonstrated that cohesion has a direct rela

  10. Key Skills for Science Learning: The Importance of Text Cohesion and Reading Ability

    ERIC Educational Resources Information Center

    Hall, Sophie Susannah; Maltby, John; Filik, Ruth; Paterson, Kevin B.

    2016-01-01

    To explore the importance of text cohesion, we conducted two experiments. We measured online (reading times) and offline (comprehension accuracy) processes for texts that were high and low cohesion. In study one (n?=?60), we manipulated referential cohesion using noun repetition (high cohesion) and synonymy (low cohesion). Students showed enhanced…

  11. Social Cohesion as the Goal: Can Social Cohesion Be Directly Pursued?

    ERIC Educational Resources Information Center

    Koonce, Kelly A.

    2011-01-01

    This article establishes an understanding of social cohesion in general and discusses organizations and activities that are known to promote social cohesion before introducing organizations that claim to work toward social cohesion as one of their main priorities. The Council of Europe's Directorate General of Social Cohesion represents a…

  12. The Direct Impact of Team Cohesiveness and Athletes' Perception of Coaching Leadership Functions on Team Success in NCAA Division I Women's Basketball

    ERIC Educational Resources Information Center

    Palmer, Mary E.

    2013-01-01

    This study investigated the direct impact of team cohesiveness and student-athletes' perceptions of coaching behavior/leadership functions on the success of NCAA Division I Women's basketball, based on the teams' win/loss records. The research collection was quantitative in nature. Statistical design and analysis provided justification for the use…

  13. Reconstructionist Analysis on the Relevance of Secondary School Learning Opportunities in Promoting National Cohesion among Students in Machakos Town Sub-County, Kenya

    ERIC Educational Resources Information Center

    Mwanzia, Ruth Mutunge; Mwangi, Simon Nyagah

    2016-01-01

    The study investigated the relevance of secondary school learning opportunities in promoting national cohesion. The study was based on the ideals and principles of a school curriculum as advocated by Brameld Theodore on reconstructionism philosophy. Descriptive survey research design was adopted for the study. A sample size of four hundred and…

  14. Preserving the Social Cohesiveness and Lifelong Learning Mission of Scotland's Public Libraries: Evaluating the Scottish National Library Strategy through the Capabilities Approach

    ERIC Educational Resources Information Center

    Badwal, Kiran

    2016-01-01

    The following paper is based on my master's degree thesis written as a graduate student at the University of Glasgow from 2014-2015 titled, "Preserving the Social Cohesiveness and Lifelong Educational Mission of Public Libraries in Times of Austerity: Assessing the Potential of the Scottish National Library Strategy through the Capabilities…

  15. Active cell-matrix coupling regulates cellular force landscapes of cohesive epithelial monolayers

    NASA Astrophysics Data System (ADS)

    Zhao, Tiankai; Zhang, Yao; Wei, Qiong; Shi, Xuechen; Zhao, Peng; Chen, Long-Qing; Zhang, Sulin

    2018-03-01

    Epithelial cells can assemble into cohesive monolayers with rich morphologies on substrates due to competition between elastic, edge, and interfacial effects. Here we present a molecularly based thermodynamic model, integrating monolayer and substrate elasticity, and force-mediated focal adhesion formation, to elucidate the active biochemical regulation over the cellular force landscapes in cohesive epithelial monolayers, corroborated by microscopy and immunofluorescence studies. The predicted extracellular traction and intercellular tension are both monolayer size and substrate stiffness dependent, suggestive of cross-talks between intercellular and extracellular activities. Our model sets a firm ground toward a versatile computational framework to uncover the molecular origins of morphogenesis and disease in multicellular epithelia.

  16. Transverse Tensile Properties of 3 Dimension-4 Directional Braided Cf/SiC Composite Based on Double-Scale Model

    NASA Astrophysics Data System (ADS)

    Niu, Xuming; Sun, Zhigang; Song, Yingdong

    2017-11-01

    In this thesis, a double-scale model for 3 Dimension-4 directional(3D-4d) braided C/SiC composites(CMCs) has been proposed to investigate mechanical properties of it. The double-scale model involves micro-scale which takes fiber/matrix/porosity in fibers tows into consideration and the unit cell scale which considers the 3D-4d braiding structure. Basing on the Micro-optical photographs of composite, we can build a parameterized finite element model that reflects structure of 3D-4d braided composites. The mechanical properties of fiber tows in transverse direction are studied by combining the crack band theory for matrix cracking and cohesive zone model for interface debonding. Transverse tensile process of 3D-4d CMCs can be simulated by introducing mechanical properties of fiber tows into finite element of 3D-4d braided CMCs. Quasi-static tensile tests of 3D-4d braided CMCs have been performed with PWS-100 test system. The predicted tensile stress-strain curve by the double scale model finds good agreement with the experimental results.

  17. Modelling increased soil cohesion by plant roots with EUROSEM

    NASA Astrophysics Data System (ADS)

    de Baets, S.; Poesen, J.; Torri, D.; Salvador, M. P.

    2009-04-01

    Soil cohesion is an important variable to model soil detachment by runoff (Morgan et al., 1998a). As soil particles are not loose, soil detachment by runoff will be limited by the cohesion of the soil material. It is generally recognized that plant roots contribute to the overall cohesion of the soil. Determination of this increased cohesion and soil roughness however is complicated and measurements of shear strength and soil reinforcement by plant roots are very time- and labour consuming. A model approach offers an alternative for the assessment of soil cohesion provided by plant roots However, few erosion models account for the effects of the below-ground biomass in their calculation of erosion rates. Therefore, the main objectives of this study is to develop an approach to improve an existing soil erosion model (EUROSEM) accounting for the erosion-reducing effects of roots. The approach for incorporating the root effects into this model is based on a comparison of measured soil detachment rates for bare and for root-permeated topsoil samples with predicted erosion rates under the same flow conditions using the erosion equation of EUROSEM. Through backwards calculation, transport capacity efficiencies and corresponding soil cohesion values can be assessed for bare and root-permeated topsoils respectively. The results are promising and show that grass roots provide a larger increase in soil cohesion as compared with tap-rooted species and that the increase in soil cohesion is not significantly different under wet and dry soil conditions, either for fibrous root systems or for tap root systems. Relationships are established between measured root density values and the corresponding calculated soil cohesion values, reflecting the effects of roots on the resistance of the topsoil to concentrated flow incision. These relationships enable one to incorporate the root effect into the soil erosion model EUROSEM, through adapting the soil cohesion input value. A scenario analysis performed with EUROSEM for different vegetation treatments, indicates that runoff and soil loss on root-permeated topsoils are slightly higher as compared to fully covered grass fields or harvested grass fields with some plant residue left, but much smaller as compared to bare topsoils. Moreover, when re-vegetating bare soils, roots are responsible for a large part of the reduction in soil loss and runoff by concentrated flow. Hence, this analysis shows that the contribution of roots to soil cohesion is very important for preventing soil loss and reducing runoff volume. The increase in soil shear strength due to the binding effect of roots on soil particles is two orders of magnitude lower as compared with soil reinforcement achieved when roots mobilize their tensile strength during soil shearing and root breakage.

  18. Composition, Alteration, and Texture of Fault-Related Rocks from Safod Core and Surface Outcrop Analogs: Evidence for Deformation Processes and Fluid-Rock Interactions

    NASA Astrophysics Data System (ADS)

    Bradbury, Kelly K.; Davis, Colter R.; Shervais, John W.; Janecke, Susanne U.; Evans, James P.

    2015-05-01

    We examine the fine-scale variations in mineralogical composition, geochemical alteration, and texture of the fault-related rocks from the Phase 3 whole-rock core sampled between 3,187.4 and 3,301.4 m measured depth within the San Andreas Fault Observatory at Depth (SAFOD) borehole near Parkfield, California. This work provides insight into the physical and chemical properties, structural architecture, and fluid-rock interactions associated with the actively deforming traces of the San Andreas Fault zone at depth. Exhumed outcrops within the SAF system comprised of serpentinite-bearing protolith are examined for comparison at San Simeon, Goat Rock State Park, and Nelson Creek, California. In the Phase 3 SAFOD drillcore samples, the fault-related rocks consist of multiple juxtaposed lenses of sheared, foliated siltstone and shale with block-in-matrix fabric, black cataclasite to ultracataclasite, and sheared serpentinite-bearing, finely foliated fault gouge. Meters-wide zones of sheared rock and fault gouge correlate to the sites of active borehole casing deformation and are characterized by scaly clay fabric with multiple discrete slip surfaces or anastomosing shear zones that surround conglobulated or rounded clasts of compacted clay and/or serpentinite. The fine gouge matrix is composed of Mg-rich clays and serpentine minerals (saponite ± palygorskite, and lizardite ± chrysotile). Whole-rock geochemistry data show increases in Fe-, Mg-, Ni-, and Cr-oxides and hydroxides, Fe-sulfides, and C-rich material, with a total organic content of >1 % locally in the fault-related rocks. The faults sampled in the field are composed of meters-thick zones of cohesive to non-cohesive, serpentinite-bearing foliated clay gouge and black fine-grained fault rock derived from sheared Franciscan Formation or serpentinized Coast Range Ophiolite. X-ray diffraction of outcrop samples shows that the foliated clay gouge is composed primarily of saponite and serpentinite, with localized increases in Ni- and Cr-oxides and C-rich material over several meters. Mesoscopic and microscopic textures and deformation mechanisms interpreted from the outcrop sites are remarkably similar to those observed in the SAFOD core. Micro-scale to meso-scale fabrics observed in the SAFOD core exhibit textural characteristics that are common in deformed serpentinites and are often attributed to aseismic deformation with episodic seismic slip. The mineralogy and whole-rock geochemistry results indicate that the fault zone experienced transient fluid-rock interactions with fluids of varying chemical composition, including evidence for highly reducing, hydrocarbon-bearing fluids.

  19. Testing the Efficacy of OurSpace, a Brief, Group Dynamics-Based Physical Activity Intervention: A Randomized Controlled Trial.

    PubMed

    Irwin, Brandon; Kurz, Daniel; Chalin, Patrice; Thompson, Nicholas

    2016-05-06

    Emerging technologies (ie, mobile phones, Internet) may be effective tools for promoting physical activity (PA). However, few interventions have provided effective means to enhance social support through these platforms. Face-to-face programs that use group dynamics-based principles of behavior change have been shown to be highly effective in enhancing social support through promoting group cohesion and PA, but to date, no studies have examined their effects in Web-based programs. The aim was to explore proof of concept and test the efficacy of a brief, online group dynamics-based intervention on PA in a controlled experiment. We expected that the impact of the intervention on PA would be moderated by perceptions of cohesion and the partner's degree of presence in the online media. Participants (n=135) were randomized into same-sex dyads and randomly assigned to one of four experimental conditions: standard social support (standard), group dynamics-based-high presence, group dynamics-based-low presence, or individual control. Participants performed two sets of planking exercises (pre-post). Between sets, participants in partnered conditions interacted with a virtual partner using either a standard social support app or a group dynamics-based app (group dynamics-based-low presence and group dynamics-based-high presence), the latter of which they participated in a series of online team-building exercises. Individual participants were given an equivalent rest period between sets. To increase presence during the second set, participants in the group dynamics-based-high presence group saw a live video stream of their partner exercising. Perceptions of cohesion were measured using a modified PA Group Environment Questionnaire. Physical activity was calculated as the time persisted during set 2 after controlling for persistence in set 1. Perceptions of cohesion were higher in the group dynamics-based-low presence (overall mean 5.81, SD 1.04) condition compared to the standard (overall mean 5.04, SD 0.81) conditions ( P=.006), but did not differ between group dynamics-based-low presence and group dynamics-based-high presence (overall mean 5.42, SD 1.07) conditions ( P=.25). Physical activity was higher in the high presence condition (mean 64.48, SD 20.19, P=.01) than all other conditions (mean 53.3, SD 17.35). A brief, online group dynamics-based intervention may be an effective method of improving group cohesion in virtual PA groups. However, it may be insufficient on its own to improve PA.

  20. Effect of neighbourhood deprivation and social cohesion on mental health inequality: a multilevel population-based longitudinal study.

    PubMed

    Fone, D; White, J; Farewell, D; Kelly, M; John, G; Lloyd, K; Williams, G; Dunstan, F

    2014-08-01

    The common mental disorders (CMDs) of anxiety and depression are the most common form of poor mental health in the general population. Evidence from the small number of previous cohort studies on the role of neighbourhood factors in mental health is inconclusive. We tested the hypothesis that high levels of neighbourhood social cohesion modify an adverse association between change in individual mental health and neighbourhood deprivation. We carried out a longitudinal multilevel analysis using data from the Caerphilly Health and Social Needs Cohort Study with a 7-year follow-up (n = 4426; age range 18-74 years at baseline). Neighbourhood deprivation and neighbourhood social cohesion were assessed at baseline and change in mental health between follow-up and baseline was assessed using the five-item Mental Health Inventory (MHI-5). Residence in the most deprived neighbourhoods was negatively associated with change in mental health, after adjusting for baseline individual socio-economic risk factors and transitions in life events. This negative effect was significantly reduced in high social cohesion neighbourhoods. The predicted change in mental health score was calculated for the 10th and 90th centiles of the household low-income distribution. The difference between them was -2.8 in the low social cohesion group and 1.1 in the high cohesion group. The difference between the groups was 3.9 [95% confidence interval (CI) 0.2-7.6]. The public health burden of poor mental health and mental health inequality could potentially be reduced by strengthening social cohesion in deprived neighbourhoods. This offers a mechanism to address the adverse effect of neighbourhood deprivation on population mental health.

  1. Depth-dependent erodibility: representing burnt soils as a two-layered cohesive/non-cohesive system

    NASA Astrophysics Data System (ADS)

    Nyman, P.; Sheridan, G. J.; Moody, J. A.; Smith, H. G.; Lane, P. N.

    2011-12-01

    Immediately after wildfire there is an abundant supply of non-cohesive ash, soil and gravel which is easily entrained by overland flow. Under these conditions the sediment flux on hillslopes can be assumed to be equal to the transport capacity of the flow. However, the supply of material is finite and at some point the hillslope could shift towards a system where entrainment is restricted by armouring and soil cohesion. In this study we test the notion that burnt hillslopes can be represented as a two-layered system of non-cohesive and cohesive soils. Using a combination of i) shear vane measurements, ii) confined hillslope flow experiments and iii) a laboratory flume, we demonstrate how erosion on burnt hillslopes primarily takes place in a distinct layer of non-cohesive soil with erosion properties that are very different to the underlying soil matrix. Shear vane measurements were taken at 5 soil depths at more than 50 points along transects in order to quantify the depth and spatial distribution of non-cohesive soil in two small (0.5 ha) and steep (30 deg) convergent basins (SE Australia) that were burnt at high severity. The measurements showed that the recently burnt hillslopes were mantled with non-cohesive soil to an average depth of 18mm and 20mm at the two sites which were situated in different geologic terrain but in similar eucalyptus dominated forests. In the hillslope flow experiments, the rapid entrainment of non-cohesive material resulted in very high sediment concentration (50-60% by volume) in the initial surge from the test area. During the flow experiments the sediment concentration decreased exponentially with time until the erosion rate reached a steady state reflecting the erodibility of the underlying cohesive soil. The formation of shallow rills and the presence of large clasts (>16cm) within the test area resulted in incomplete removal of the non-cohesive material at shear stress < 50 Ncm-2. At shear stress > 50 Ncm-2 all material was removed, and the erosion depth at the end of the experiments was equal to the depth of non-cohesive material measured using the shear vane. In a separate set of experiments, a laboratory flume was used to measure the erodibility at different soil depths using soil cores that were burnt at moderate to high severity. Unlike the field based flow experiments, the erodibility measurements of non-cohesive soils in the flume were not restricted by the transport capacity of the flow. Results from the flume experiments showed a two order of magnitude decrease in erodibility within the top 2cm of the soil profile for soil cores from both chaparral and coniferous forests (western US). In summary, these results indicate that a majority of hillslope sediment may be generated from a relatively shallow layer of non-cohesive and highly erodible material. The depth of this material may be an important property that can help determine the post-fire erosion and debris flow potential, particularly in systems where other sources of sediment are limited. The study confirms that erodibility of burnt soil shows strong variation with depth and that the assumption of a constant erodibility factor may lead to misrepresentation of important processes.

  2. Cortical bone fracture analysis using XFEM - case study.

    PubMed

    Idkaidek, Ashraf; Jasiuk, Iwona

    2017-04-01

    We aim to achieve an accurate simulation of human cortical bone fracture using the extended finite element method within a commercial finite element software abaqus. A two-dimensional unit cell model of cortical bone is built based on a microscopy image of the mid-diaphysis of tibia of a 70-year-old human male donor. Each phase of this model, an interstitial bone, a cement line, and an osteon, are considered linear elastic and isotropic with material properties obtained by nanoindentation, taken from literature. The effect of using fracture analysis methods (cohesive segment approach versus linear elastic fracture mechanics approach), finite element type, and boundary conditions (traction, displacement, and mixed) on cortical bone crack initiation and propagation are studied. In this study cohesive segment damage evolution for a traction separation law based on energy and displacement is used. In addition, effects of the increment size and mesh density on analysis results are investigated. We find that both cohesive segment and linear elastic fracture mechanics approaches within the extended finite element method can effectively simulate cortical bone fracture. Mesh density and simulation increment size can influence analysis results when employing either approach, and using finer mesh and/or smaller increment size does not always provide more accurate results. Both approaches provide close but not identical results, and crack propagation speed is found to be slower when using the cohesive segment approach. Also, using reduced integration elements along with the cohesive segment approach decreases crack propagation speed compared with using full integration elements. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  3. Does emotional intelligence change during medical school gross anatomy course? Correlations with students' performance and team cohesion.

    PubMed

    Holman, Michelle A; Porter, Samuel G; Pawlina, Wojciech; Juskewitch, Justin E; Lachman, Nirusha

    2016-01-01

    Emotional intelligence (EI) has been associated with increased academic achievement, but its impact on medical education is relatively unexplored. This study sought to evaluate change in EI, performance outcomes, and team cohesion within a team-based medical school anatomy course. Forty-two medical students completed a pre-course and post-course Schutte Self-Report Emotional Intelligence Test (SSEIT). Individual EI scores were then compared with composite course performance grade and team cohesion survey results. Mean pre-course EI score was 140.3 out of a possible 160. During the course, mean individual EI scores did not change significantly (P = 0.17) and no correlation between EI scores and academic performance was noted (P = 0.31). In addition, EI did not correlate with team cohesion (P = 0.16). While business has found significant utility for EI in increasing performance and productivity, its role in medical education is still uncertain. © 2015 American Association of Anatomists.

  4. Cohesiveness tunes assembly and morphology of FG nucleoporin domain meshworks – Implications for nuclear pore permeability

    PubMed Central

    Eisele, Nico B.; Labokha, Aksana A.; Frey, Steffen; Görlich, Dirk; Richter, Ralf P.

    2013-01-01

    Nuclear pore complexes control the exchange of macromolecules between the cytoplasm and the nucleus. A selective permeability barrier that arises from a supramolecular assembly of intrinsically unfolded nucleoporin domains rich in phenylalanine-glycine dipeptides (FG domains) fills the nuclear pore. There is increasing evidence that selective transport requires cohesive FG domain interactions. To understand the functional roles of cohesive interactions, we studied monolayers of end-grafted FG domains as a bottom-up nanoscale model system of the permeability barrier. Based on detailed physicochemical analysis of the model films and comparison of the data with polymer theory, we propose that cohesiveness is tuned to promote rapid assembly of the permeability barrier and to generate a stable and compact pore-filling meshwork with a small mesh size. Our results highlight the functional importance of weak interactions, typically a few kBT per chain, and contribute important information to understand the mechanism of size-selective transport. PMID:24138862

  5. Topographic Signatures of Meandering Rivers with Differences in Outer Bank Cohesion

    NASA Astrophysics Data System (ADS)

    Kelly, S. A.; Belmont, P.

    2014-12-01

    Within a given valley setting, interactions between river hydraulics, sediment, topography, and vegetation determine attributes of channel morphology, including planform, width and depth, slope, and bed and bank properties. These feedbacks also govern river behavior, including migration and avulsion. Bank cohesion, from the addition of fine sediment and/or vegetation has been recognized in flume experiments as a necessary component to create and maintain a meandering channel planform. Greater bank cohesion slows bank erosion, limiting the rate at which a river can adjust laterally and preventing so-called "runaway widening" to a braided state. Feedbacks of bank cohesion on channel hydraulics and sediment transport may thus produce distinct topographic signatures, or patterns in channel width, depth, and point bar transverse slope. We expect that in bends of greater outer bank cohesion the channel will be narrower, deeper, and bars will have greater transverse slopes. Only recently have we recognized that biotic processes may imprint distinct topographic signatures on the landscape. This study explores topographic signatures of three US rivers: the lower Minnesota River, near Mankato, MN, the Le Sueur River, south central MN, and the Fall River, Rocky Mountain National Park, CO. Each of these rivers has variability in outer bank cohesion, quantified based on geotechnical and vegetation properties, and in-channel topography, which was derived from rtkGPS and acoustic bathymetry surveys. We present methods for incorporating biophysical feedbacks into geomorphic transport laws so that models can better simulate the spatial patterns and variability of topographic signatures.

  6. Effects of 6 Weeks Psychological Skill Training on Team Cohesion, Self-Confidence & Anxiety: A Case of Youth Basketball Players

    ERIC Educational Resources Information Center

    Miçoogullari, Bülent Okan; Kirazci, Sadettin

    2016-01-01

    The purpose of this study was to examine the impact of a six-week psychological skill training (PST) program that is based on a cognitive-behavioral conceptual framework on team cohesion, confidence, and anxiety of an intact team. Thirty-six male basketball players, 19 athletes for the experimental group and 17 athletes for the control group, aged…

  7. A comparative risk assessment framework for wildland fire management: the 2010 cohesive strategy science report

    Treesearch

    David E. Calkin; Alan A. Ager; Matthew P. Thompson; Mark A. Finney; Danny C. Lee; Thomas M. Quigley; Charles W. McHugh; Karin L. Riley; Julie M. Gilbertson-Day

    2011-01-01

    The FLAME Act of 2009 requires the U.S. Department of Agriculture Forest Service and the U.S. Department of Interior to submit to Congress a Cohesive Wildfire Management Strategy. In this report, we explore the general science available for a risk-based approach to fire and fuels management and suggest analyses that may be applied at multiple scales to inform...

  8. Framework for non-coherent interface models at finite displacement jumps and finite strains

    NASA Astrophysics Data System (ADS)

    Ottosen, Niels Saabye; Ristinmaa, Matti; Mosler, Jörn

    2016-05-01

    This paper deals with a novel constitutive framework suitable for non-coherent interfaces, such as cracks, undergoing large deformations in a geometrically exact setting. For this type of interface, the displacement field shows a jump across the interface. Within the engineering community, so-called cohesive zone models are frequently applied in order to describe non-coherent interfaces. However, for existing models to comply with the restrictions imposed by (a) thermodynamical consistency (e.g., the second law of thermodynamics), (b) balance equations (in particular, balance of angular momentum) and (c) material frame indifference, these models are essentially fiber models, i.e. models where the traction vector is collinear with the displacement jump. This constraints the ability to model shear and, in addition, anisotropic effects are excluded. A novel, extended constitutive framework which is consistent with the above mentioned fundamental physical principles is elaborated in this paper. In addition to the classical tractions associated with a cohesive zone model, the main idea is to consider additional tractions related to membrane-like forces and out-of-plane shear forces acting within the interface. For zero displacement jump, i.e. coherent interfaces, this framework degenerates to existing formulations presented in the literature. For hyperelasticity, the Helmholtz energy of the proposed novel framework depends on the displacement jump as well as on the tangent vectors of the interface with respect to the current configuration - or equivalently - the Helmholtz energy depends on the displacement jump and the surface deformation gradient. It turns out that by defining the Helmholtz energy in terms of the invariants of these variables, all above-mentioned fundamental physical principles are automatically fulfilled. Extensions of the novel framework necessary for material degradation (damage) and plasticity are also covered.

  9. Lessons learned from a lateral violence and team-building intervention.

    PubMed

    Barrett, Ann; Piatek, Carolyn; Korber, Susan; Padula, Cynthia

    2009-01-01

    Lateral violence is likely to exist in settings characterized by poor leadership and lack of clearly articulated roles, expectations, and processes that guide behavior. The purposes of this process improvement project were to (1) identify and improve baseline levels of nurse satisfaction and group cohesion through planned unit-based interventions, (2) determine the effect of a team-building intervention on factors that impact cohesive team functioning, and (3) determine the effect of lateral violence training and communication style differences in improving team cohesion. The sample consisted of registered nurses (RNs) from 4 diverse patient care areas, chosen on the basis of low scores on the National Database of Nursing Quality Indicators (NDNQI) RN-RN interaction subscale. A quasi-experimental pre-post intervention design without a control group was employed. The intervention focused on lateral violence and team building. A qualitative component focused on the impact of the intervention on overall group dynamics and processes. RN scores on the Group Cohesion Scale (P = .037) and the RN-RN interaction scores improved postintervention. Group sessions focused on building trust, identifying and clarifying roles, engaging staff in decision making, role-modeling positive interactions, and holding each other accountable. Key to a cohesive environment is an effective nurse manager able to drive and sustain change.

  10. A Model for Predicting Grain Boundary Cracking in Polycrystalline Viscoplastic Materials Including Scale Effects

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Allen, D.H.; Helms, K.L.E.; Hurtado, L.D.

    1999-04-06

    A model is developed herein for predicting the mechanical response of inelastic crystalline solids. Particular emphasis is given to the development of microstructural damage along grain boundaries, and the interaction of this damage with intragranular inelasticity caused by dislocation dissipation mechanisms. The model is developed within the concepts of continuum mechanics, with special emphasis on the development of internal boundaries in the continuum by utilizing a cohesive zone model based on fracture mechanics. In addition, the crystalline grains are assumed to be characterized by nonlinear viscoplastic mechanical material behavior in order to account for dislocation generation and migration. Due tomore » the nonlinearities introduced by the crack growth and viscoplastic constitution, a numerical algorithm is utilized to solve representative problems. Implementation of the model to a finite element computational algorithm is therefore briefly described. Finally, sample calculations are presented for a polycrystalline titanium alloy with particular focus on effects of scale on the predicted response.« less

  11. Finite Element Model for Failure Study of Two-Dimensional Triaxially Braided Composite

    NASA Technical Reports Server (NTRS)

    Li, Xuetao; Binienda, Wieslaw K.; Goldberg, Robert K.

    2010-01-01

    A new three-dimensional finite element model of two-dimensional triaxially braided composites is presented in this paper. This meso-scale modeling technique is used to examine and predict the deformation and damage observed in tests of straight sided specimens. A unit cell based approach is used to take into account the braiding architecture as well as the mechanical properties of the fiber tows, the matrix and the fiber tow-matrix interface. A 0 deg / plus or minus 60 deg. braiding configuration has been investigated by conducting static finite element analyses. Failure initiation and progressive degradation has been simulated in the fiber tows by use of the Hashin failure criteria and a damage evolution law. The fiber tow-matrix interface was modeled by using a cohesive zone approach to capture any fiber-matrix debonding. By comparing the analytical results to those obtained experimentally, the applicability of the developed model was assessed and the failure process was investigated.

  12. The Development of Directional Decohesion Finite Elements for Multiscale Failure Analysis of Metallic Polycrystals

    NASA Technical Reports Server (NTRS)

    Saether, Erik; Glaessgen, Edward H.

    2009-01-01

    Atomistic simulations of intergranular fracture have indicated that grain-scale crack growth in polycrystalline metals can be direction dependent. At these material length scales, the atomic environment greatly influences the nature of intergranular crack propagation, through either brittle or ductile mechanisms, that are a function of adjacent grain orientation and direction of crack propagation. Methods have been developed to obtain cohesive zone models (CZM) directly from molecular dynamics simulations. These CZMs may be incorporated into decohesion finite element formulations to simulate fracture at larger length scales. A new directional decohesion element is presented that calculates the direction of Mode I opening and incorporates a material criterion for dislocation emission based on the local crystallographic environment to automatically select the CZM that best represents crack growth. The simulation of fracture in 2-D and 3-D aluminum polycrystals is used to illustrate the effect of parameterized CZMs and the effectiveness of directional decohesion finite elements.

  13. A Numerical Method for Simulating the Microscopic Damage Evolution in Composites Under Uniaxial Transverse Tension

    NASA Astrophysics Data System (ADS)

    Zhi, Jie; Zhao, Libin; Zhang, Jianyu; Liu, Zhanli

    2016-06-01

    In this paper, a new numerical method that combines a surface-based cohesive model and extended finite element method (XFEM) without predefining the crack paths is presented to simulate the microscopic damage evolution in composites under uniaxial transverse tension. The proposed method is verified to accurately capture the crack kinking into the matrix after fiber/matrix debonding. A statistical representative volume element (SRVE) under periodic boundary conditions is used to approximate the microstructure of the composites. The interface parameters of the cohesive models are investigated, in which the initial interface stiffness has a great effect on the predictions of the fiber/matrix debonding. The detailed debonding states of SRVE with strong and weak interfaces are compared based on the surface-based and element-based cohesive models. The mechanism of damage in composites under transverse tension is described as the appearance of the interface cracks and their induced matrix micro-cracking, both of which coalesce into transversal macro-cracks. Good agreement is found between the predictions of the model and the in situ experimental observations, demonstrating the efficiency of the presented model for simulating the microscopic damage evolution in composites.

  14. Applying automatic item generation to create cohesive physics testlets

    NASA Astrophysics Data System (ADS)

    Mindyarto, B. N.; Nugroho, S. E.; Linuwih, S.

    2018-03-01

    Computer-based testing has created the demand for large numbers of items. This paper discusses the production of cohesive physics testlets using an automatic item generation concepts and procedures. The testlets were composed by restructuring physics problems to reveal deeper understanding of the underlying physical concepts by inserting a qualitative question and its scientific reasoning question. A template-based testlet generator was used to generate the testlet variants. Using this methodology, 1248 testlet variants were effectively generated from 25 testlet templates. Some issues related to the effective application of the generated physics testlets in practical assessments were discussed.

  15. 3D model of radionuclide dispersion in coastal areas with multifraction cohesive and non-cohesive sediments

    NASA Astrophysics Data System (ADS)

    Brovchenko, Igor; Maderich, Vladimir; Jung, Kyung Tae

    2015-04-01

    We developed new radionuclide dispersion model that may be used in coastal areas, rivers and estuaries with non-uniform distribution of suspended and bed sediments both cohesive and non-cohesive types. Model describes radionuclides concentration in dissolved phase in water column, particulated phase on suspended sediments on each sediment class types, bed sediments and pore water. The transfer of activity between the water column and the pore water in the upper layer of the bottom sediment is governed by diffusion processes. The phase exchange between dissolved and particulate radionuclides is written in terms of desorption rate a12 (s-1) and distribution coefficient Kd,iw and Kd,ib (m3/kg) for water column and for bottom deposit, respectively. Following (Periáñez et al., 1996) the dependence of distribution coefficients is inversely proportional to the sediment particle size. For simulation of 3D circulation, turbulent diffusion and wave fields a hydrostatic model SELFE (Roland et. al. 2010) that solves Reynolds-stress averaged Navier-Stokes (RANS) equations and Wave Action transport equation on the unstructured grids was used. Simulation of suspended sediment concentration and bed sediments composition is based on (L. Pinto et. al., 2012) approach that originally was developed for non-cohesive sediments. In present study we modified this approach to include possibility of simulating mixture of cohesive and non-cohesive sediments by implementing parameterizations for erosion and deposition fluxes for cohesive sediments and by implementing flocculation model for determining settling velocity of cohesive flocs. Model of sediment transport was calibrated on measurements in the Yellow Sea which is shallow tidal basin with strongly non-uniform distribution of suspended and bed sediments. Model of radionuclide dispersion was verified on measurements of 137Cs concentration in surface water and bed sediments after Fukushima Daiichi nuclear accident. References Periáñez, R. Abril, J.M., Garcia-Leon, M. (1996). Modelling the dispersion of non-conservative radionuclides in tidal waters'Part 1: conceptual and mathematical model. Journal of Environmental Radioactivity 31 (2), 127-141 Roland, A., Y. J. Zhang, H. V. Wang, Y. Meng, Y.-C. Teng, V. Maderich, I. Brovchenko, M. Dutour-Sikiric, and U. Zanke (2012), A fully coupled 3D wave-current interaction model on unstructured grids, J. Geophys. Res., 117, C00J33 Pinto L., Fortunato A.B., Zhang Y., Oliveira A., Sancho F.E.P. (2012) Development and validation of a three-dimensional morphodynamic modelling system for non-cohesive sediments, Ocean Modell., (57-58), 1-14

  16. A square-force cohesion model and its extraction from bulk measurements

    NASA Astrophysics Data System (ADS)

    Liu, Peiyuan; Lamarche, Casey; Kellogg, Kevin; Hrenya, Christine

    2017-11-01

    Cohesive particles remain poorly understood, with order of magnitude differences exhibited for prior, physical predictions of agglomerate size. A major obstacle lies in the absence of robust models of particle-particle cohesion, thereby precluding accurate prediction of the behavior of cohesive particles. Rigorous cohesion models commonly contain parameters related to surface roughness, to which cohesion shows extreme sensitivity. However, both roughness measurement and its distillation into these model parameters are challenging. Accordingly, we propose a ``square-force'' model, where cohesive force remains constant until a cut-off separation. Via DEM simulations, we demonstrate validity of the square-force model as surrogate of more rigorous models, when its two parameters are selected to match the two key quantities governing dense and dilute granular flows, namely maximum cohesive force and critical cohesive energy, respectively. Perhaps more importantly, we establish a method to extract the parameters in the square-force model via defluidization, due to its ability to isolate the effects of the two parameters. Thus, instead of relying on complicated scans of individual grains, determination of particle-particle cohesion from simple bulk measurements becomes feasible. Dow Corning Corporation.

  17. Description of new dry granular materials of variable cohesion and friction coefficient: Implications for laboratory modeling of the brittle crust

    NASA Astrophysics Data System (ADS)

    Abdelmalak, M. M.; Bulois, C.; Mourgues, R.; Galland, O.; Legland, J.-B.; Gruber, C.

    2016-08-01

    Cohesion and friction coefficient are fundamental parameters for scaling brittle deformation in laboratory models of geological processes. However, they are commonly not experimental variable, whereas (1) rocks range from cohesion-less to strongly cohesive and from low friction to high friction and (2) strata exhibit substantial cohesion and friction contrasts. This brittle paradox implies that the effects of brittle properties on processes involving brittle deformation cannot be tested in laboratory models. Solving this paradox requires the use of dry granular materials of tunable and controllable brittle properties. In this paper, we describe dry mixtures of fine-grained cohesive, high friction silica powder (SP) and low-cohesion, low friction glass microspheres (GM) that fulfill this requirement. We systematically estimated the cohesions and friction coefficients of mixtures of variable proportions using two independent methods: (1) a classic Hubbert-type shear box to determine the extrapolated cohesion (C) and friction coefficient (μ), and (2) direct measurements of the tensile strength (T0) and the height (H) of open fractures to calculate the true cohesion (C0). The measured values of cohesion increase from 100 Pa for pure GM to 600 Pa for pure SP, with a sub-linear trend of the cohesion with the mixture GM content. The two independent cohesion measurement methods, from shear tests and tension/extensional tests, yield very similar results of extrapolated cohesion (C) and show that both are robust and can be used independently. The measured values of friction coefficients increase from 0.5 for pure GM to 1.05 for pure SP. The use of these granular material mixtures now allows testing (1) the effects of cohesion and friction coefficient in homogeneous laboratory models and (2) testing the effect of brittle layering on brittle deformation, as demonstrated by preliminary experiments. Therefore, the brittle properties become, at last, experimental variables.

  18. Measuring team cohesion: observations from the science.

    PubMed

    Salas, Eduardo; Grossman, Rebecca; Hughes, Ashley M; Coultas, Chris W

    2015-05-01

    The aim of this study was to review literature relevant to cohesion measurement, explore developing measurement approaches, and provide theoretical and practical recommendations for optimizing cohesion measurement. Cohesion is essential for team effectiveness and performance, leading researchers to focus attention on understanding how to enhance it. However, cohesion is inconsistently defined and measured, making it difficult to compare findings across studies and limiting the ability to advance science and practice. We reviewed empirical research through which we uncovered specific information about cohesion's conceptualization, measurement, and relationships with performance, culminating in a set of current trends from which we provide suggestions and possible solutions to guide future efforts and help the field converge toward greater consistency. Cohesion demonstrates more significant relationships with performance when conceptualized using social and task (but not other) dimensions and when analyses are performed at the team level. Cohesion is inherently temporal, yet researchers rarely measure cohesion at multiple points during the life of a team. Finally, cohesion matters in large, dynamic collectives, complicating measurement. However, innovative and unobtrusive methodologies are being used, which we highlight. Practitioners and researchers are encouraged to define cohesion with task and social subdimensions and to measure with behavioral and attitudinal operationalizations. Individual and team-oriented items are recommended, though team-level analyses are most effective. Innovative/unobtrusive methods should be further researched to enable cohesion measurement longitudinally and in large, dynamic collectives. By applying our findings and conclusions, researchers and practitioners will be more likely to find consistent, reliable, and significant cohesion-to-performance relationships. This work is not subject to U.S. copyright restrictions.

  19. Rock strength measurements on Archaean basement granitoids recovered from scientific drilling in the active Koyna seismogenic zone, western India

    NASA Astrophysics Data System (ADS)

    Goswami, Deepjyoti; Akkiraju, Vyasulu V.; Misra, Surajit; Roy, Sukanta; Singh, Santosh K.; Sinha, Amalendu; Gupta, Harsh; Bansal, B. K.; Nayak, Shailesh

    2017-08-01

    Reservoir triggered earthquakes have been occurring in the Koyna area, western India for the past five decades. Triaxial tests carried out on 181 core samples of Archaean granitoids underlying the Deccan Traps provide valuable constraints on rock strength properties in the Koyna seismogenic zone for the first time. The data include measurements on granite gneiss, granite, migmatitic gneiss and mylonitised granite gneiss obtained from boreholes KBH-3, KBH-4A, KBH-5 and KBH-7 located in the western and eastern margins of the seismic zone. Salient results are as follows. (i) Increase of rock strength with increasing confining pressure allow determination of the linearized failure envelopes from which the cohesive strength and angle of internal friction are calculated. (ii) Variable differential stresses at different depths are the manifestations of deformation partitioning in close association of fault zone(s) or localized fracture zones. (iii) Fractures controlled by naturally developed weak planes such as cleavage and fabric directly affect the rock strength properties, but the majority of failure planes developed during triaxial tests is not consistent with the orientations of pre-existing weak planes. The failure planes may, therefore, represent other planes of weakness induced by ongoing seismic activity. (iv) Stress-strain curves confirm that axial deformation is controlled by the varying intensity of pre-existing shear in the granitoids, viz., mylonite, granite gneiss and migmatitic gneiss. (v) Frequent occurrences of low magnitude earthquakes may be attributed to low and variable rock strength of the granitoids, which, in turn, is modified by successive seismic events.

  20. An examination of the relationship between athlete leadership and cohesion using social network analysis.

    PubMed

    Loughead, Todd M; Fransen, Katrien; Van Puyenbroeck, Stef; Hoffmann, Matt D; De Cuyper, Bert; Vanbeselaere, Norbert; Boen, Filip

    2016-11-01

    Two studies investigated the structure of different athlete leadership networks and its relationship to cohesion using social network analysis. In Study 1, we examined the relationship between a general leadership quality network and task and social cohesion as measured by the Group Environment Questionnaire (GEQ). In Study 2, we investigated the leadership networks for four different athlete leadership roles (task, motivational, social and external) and their association with task and social cohesion networks. In Study 1, the results demonstrated that the general leadership quality network was positively related to task and social cohesion. The results from Study 2 indicated positive correlations between the four leadership networks and task and social cohesion networks. Further, the motivational leadership network emerged as the strongest predictor of the task cohesion network, while the social leadership network was the strongest predictor of the social cohesion network. The results complement a growing body of research indicating that athlete leadership has a positive association with cohesion.

  1. Traction curves for the decohesion of covalent crystals

    NASA Astrophysics Data System (ADS)

    Enrique, Raúl A.; Van der Ven, Anton

    2017-01-01

    We study, by first principles, the energy versus separation curves for the cleavage of a family of covalent crystals with the diamond and zincblende structure. We find that there is universality in the curves for different materials which is chemistry independent but specific to the geometry of the particular cleavage plane. Since these curves do not strictly follow the universal binding energy relationship (UBER), we present a derivation of an extension to this relationship that includes non-linear force terms. This extended form of UBER allows for a flexible and practical mathematical description of decohesion curves that can be applied to the quantification of cohesive zone models.

  2. A comparative study of roll compaction of free-flowing and cohesive pharmaceutical powders.

    PubMed

    Yu, Shen; Gururajan, Bindhu; Reynolds, Gavin; Roberts, Ron; Adams, Michael J; Wu, Chuan-Yu

    2012-05-30

    Roll compaction is widely adopted as a dry granulation method in the pharmaceutical industry. The roll compaction behaviour of feed powders is primarily governed by two parameters: the maximum pressure and the nip angle. Although the maximum pressure can be measured directly using pressure sensors fitted in the rolls, it is not a trivial task to determine the nip angle, which is a measure of the size of the compaction zone and hence the degree of compression. Thus a robust approach based upon the calculation of the pressure gradient, which can be obtained directly from experiments using an instrumented roll compactor, was developed. It has been shown that the resulting nip angles are comparable to those obtained using the methods reported in literature. Nevertheless, the proposed approach has distinctive advantages including (1) it is based on the intrinsic features of slip and no-slip interactions between the powder and roll surface and (2) it is not necessary to carry out wall friction measurements that involve plates that may not be representative of the roll compactor in terms of the surface topography and surface energy. The method was evaluated by investigating the effect of roll speed for two pharmaceutical excipients with distinctive material properties: microcrystalline cellulose (MCC) and di-calcium phosphate dihydrate (DCPD). It was found that the maximum pressure and nip angle for DCPD, which is a cohesive powder, decrease sharply with increasing roll speed whereas they are essentially independent of roll speed for MCC, which is an easy flowing powder. The roll compaction behaviour of MCC-DCPD mixtures with various compositions was also investigated in order to evaluate the effect of flowability. It was found that the nip angle and maximum pressure generally increased with improved flowability of the feed powders. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Bothered by abstractness or engaged by cohesion? Experts' explanations enhance novices' deep-learning.

    PubMed

    Lachner, Andreas; Nückles, Matthias

    2015-03-01

    Experts' explanations have been shown to better enhance novices' transfer as compared with advanced students' explanations. Based on research on expertise and text comprehension, we investigated whether the abstractness or the cohesion of experts' and intermediates' explanations accounted for novices' learning. In Study 1, we showed that the superior cohesion of experts' explanations accounted for most of novices' transfer, whereas the degree of abstractness did not impact novices' transfer performance. In Study 2, we investigated novices' processing while learning with experts' and intermediates' explanations. We found that novices studying experts' explanations actively self-regulated their processing of the explanations, as they showed mainly deep-processing activities, whereas novices learning with intermediates' explanations were mainly engaged in shallow-processing activities by paraphrasing the explanations. Thus, we concluded that subject-matter expertise is a crucial prerequisite for instructors. Despite the abstract character of experts' explanations, their subject-matter expertise enables them to generate highly cohesive explanations that serve as a valuable scaffold for students' construction of flexible knowledge by engaging them in deep-level processing. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  4. Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure-Part II: Finite element applications

    NASA Astrophysics Data System (ADS)

    Máirtín, Éamonn Ó.; Parry, Guillaume; Beltz, Glenn E.; McGarry, J. Patrick

    2014-02-01

    This paper, the second of two parts, presents three novel finite element case studies to demonstrate the importance of normal-tangential coupling in cohesive zone models (CZMs) for the prediction of mixed-mode interface debonding. Specifically, four new CZMs proposed in Part I of this study are implemented, namely the potential-based MP model and the non-potential-based NP1, NP2 and SMC models. For comparison, simulations are also performed for the well established potential-based Xu-Needleman (XN) model and the non-potential-based model of van den Bosch, Schreurs and Geers (BSG model). Case study 1: Debonding and rebonding of a biological cell from a cyclically deforming silicone substrate is simulated when the mode II work of separation is higher than the mode I work of separation at the cell-substrate interface. An active formulation for the contractility and remodelling of the cell cytoskeleton is implemented. It is demonstrated that when the XN potential function is used at the cell-substrate interface repulsive normal tractions are computed, preventing rebonding of significant regions of the cell to the substrate. In contrast, the proposed MP potential function at the cell-substrate interface results in negligible repulsive normal tractions, allowing for the prediction of experimentally observed patterns of cell cytoskeletal remodelling. Case study 2: Buckling of a coating from the compressive surface of a stent is simulated. It is demonstrated that during expansion of the stent the coating is initially compressed into the stent surface, while simultaneously undergoing tangential (shear) tractions at the coating-stent interface. It is demonstrated that when either the proposed NP1 or NP2 model is implemented at the stent-coating interface mixed-mode over-closure is correctly penalised. Further expansion of the stent results in the prediction of significant buckling of the coating from the stent surface, as observed experimentally. In contrast, the BSG model does not correctly penalise mixed-mode over-closure at the stent-coating interface, significantly altering the stress state in the coating and preventing the prediction of buckling. Case study 3: Application of a displacement to the base of a bi-layered composite arch results in a symmetric sinusoidal distribution of normal and tangential traction at the arch interface. The traction defined mode mixity at the interface ranges from pure mode II at the base of the arch to pure mode I at the top of the arch. It is demonstrated that predicted debonding patterns are highly sensitive to normal-tangential coupling terms in a CZM. The NP2, XN, and BSG models exhibit a strong bias towards mode I separation at the top of the arch, while the NP1 model exhibits a bias towards mode II debonding at the base of the arch. Only the SMC model provides mode-independent behaviour in the early stages of debonding. This case study provides a practical example of the importance of the behaviour of CZMs under conditions of traction controlled mode mixity, following from the theoretical analysis presented in Part I of this study.

  5. Effects of text cohesion on comprehension and retention of colorectal cancer screening information: a preliminary study.

    PubMed

    Liu, Chiung-Ju; Rawl, Susan M

    2012-01-01

    Increasing readability of written cancer prevention information is a fundamental step to increasing awareness and knowledge of cancer screening. Instead of readability formulas, the present study focused on text cohesion, which is the degree to which the text content ties together. The purpose of this study was to examine the effect of text cohesion on reading times, comprehension, and retention of colorectal cancer prevention information. English-speaking adults (50 years of age or older) were recruited from local communities. Participants were randomly assigned to read colorectal cancer prevention subtopics presented at 2 levels of text cohesion: from higher cohesion to lower cohesion, or vice versa. Reading times, word recognition, text comprehension, and recall were assessed after reading. Two weeks later, text comprehension and recall were reassessed. Forty-two adults completed the study, but five were lost to follow up. Higher text cohesion showed a significant effect on reading times and text comprehension but not on word recognition and recall. The effect of text cohesion was not found on text comprehension and recall after 2 weeks. Increasing text cohesion facilitates reading speed and comprehension of colorectal cancer prevention information. Further research on the effect of text cohesion is warranted.

  6. Social cohesion matters in health.

    PubMed

    Chuang, Ying-Chih; Chuang, Kun-Yang; Yang, Tzu-Hsuan

    2013-10-28

    The concept of social cohesion has invoked debate due to the vagueness of its definition and the limitations of current measurements. This paper attempts to examine the concept of social cohesion, develop measurements, and investigate the relationship between social cohesion and individual health. This study used a multilevel study design. The individual-level samples from 29 high-income countries were obtained from the 2000 World Value Survey (WVS) and the 2002 European Value Survey. National-level social cohesion statistics were obtained from Organization of Economic Cooperation and Development datasets, World Development Indicators, and Asian Development Bank key indicators for the year 2000, and from aggregating responses from the WVS. In total 47,923 individuals were included in this study. The factor analysis was applied to identify dimensions of social cohesion, which were used as entities in the cluster analysis to generate a regime typology of social cohesion. Then, multilevel regression models were applied to assess the influences of social cohesion on an individual's self-rated health. Factor analysis identified five dimensions of social cohesion: social equality, social inclusion, social development, social capital, and social diversity. Then, the cluster analysis revealed five regimes of social cohesion. A multi-level analysis showed that respondents in countries with higher social inclusion, social capital, and social diversity were more likely to report good health above and beyond individual-level characteristics. This study is an innovative effort to incorporate different aspects of social cohesion. This study suggests that social cohesion was associated with individual self-rated after controlling individual characteristics. To achieve further advancement in population health, developed countries should consider policies that would foster a society with a high level of social inclusion, social capital, and social diversity. Future research could focus on identifying possible pathways by which social cohesion influences various health outcomes.

  7. Multiscale crystal defect dynamics: A coarse-grained lattice defect model based on crystal microstructure

    NASA Astrophysics Data System (ADS)

    Lyu, Dandan; Li, Shaofan

    2017-10-01

    Crystal defects have microstructure, and this microstructure should be related to the microstructure of the original crystal. Hence each type of crystals may have similar defects due to the same failure mechanism originated from the same microstructure, if they are under the same loading conditions. In this work, we propose a multiscale crystal defect dynamics (MCDD) model that models defects by considering its intrinsic microstructure derived from the microstructure or material genome of the original perfect crystal. The main novelties of present work are: (1) the discrete exterior calculus and algebraic topology theory are used to construct a scale-up (coarse-grained) dual lattice model for crystal defects, which may represent all possible defect modes inside a crystal; (2) a higher order Cauchy-Born rule (up to the fourth order) is adopted to construct atomistic-informed constitutive relations for various defect process zones, and (3) an hierarchical strain gradient theory based finite element formulation is developed to support an hierarchical multiscale cohesive (process) zone model for various defects in a unified formulation. The efficiency of MCDD computational algorithm allows us to simulate dynamic defect evolution at large scale while taking into account atomistic interaction. The MCDD model has been validated by comparing of the results of MCDD simulations with that of molecular dynamics (MD) in the cases of nanoindentation and uniaxial tension. Numerical simulations have shown that MCDD model can predict dislocation nucleation induced instability and inelastic deformation, and thus it may provide an alternative solution to study crystal plasticity.

  8. A simple and effective approach to prepare injectable macroporous calcium phosphate cement for bone repair: Syringe-foaming using a viscous hydrophilic polymeric solution.

    PubMed

    Zhang, Jingtao; Liu, Weizhen; Gauthier, Olivier; Sourice, Sophie; Pilet, Paul; Rethore, Gildas; Khairoun, Khalid; Bouler, Jean-Michel; Tancret, Franck; Weiss, Pierre

    2016-02-01

    In this study, we propose a simple and effective strategy to prepare injectable macroporous calcium phosphate cements (CPCs) by syringe-foaming via hydrophilic viscous polymeric solution, such as using silanized-hydroxypropyl methylcellulose (Si-HPMC) as a foaming agent. The Si-HPMC foamed CPCs demonstrate excellent handling properties such as injectability and cohesion. After hardening the foamed CPCs possess hierarchical macropores and their mechanical properties (Young's modulus and compressive strength) are comparable to those of cancellous bone. Moreover, a preliminary in vivo study in the distal femoral sites of rabbits was conducted to evaluate the biofunctionality of this injectable macroporous CPC. The evidence of newly formed bone in the central zone of implantation site indicates the feasibility and effectiveness of this foaming strategy that will have to be optimized by further extensive animal experiments. A major challenge in the design of biomaterial-based injectable bone substitutes is the development of cohesive, macroporous and self-setting calcium phosphate cement (CPC) that enables rapid cell invasion with adequate initial mechanical properties without the use of complex processing and additives. Thus, we propose a simple and effective strategy to prepare injectable macroporous CPCs through syringe-foaming using a hydrophilic viscous polymeric solution (silanized-hydroxypropyl methylcellulose, Si-HPMC) as a foaming agent, that simultaneously meets all the aforementioned aims. Evidence from our in vivo studies shows the existence of newly formed bone within the implantation site, indicating the feasibility and effectiveness of this foaming strategy, which could be used in various CPC systems using other hydrophilic viscous polymeric solutions. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  9. Social cohesion and self-rated health: The moderating effect of neighborhood physical disorder.

    PubMed

    Bjornstrom, Eileen E S; Ralston, Margaret L; Kuhl, Danielle C

    2013-12-01

    Using data from the Los Angeles Family and Neighborhood Survey and its companion datasets, we examined how neighborhood disorder, perceived danger and both individually perceived and contextually measured neighborhood social cohesion are associated with self-rated health. Results indicate that neighborhood disorder is negatively associated with health and the relationship is explained by perceived cohesion and danger, which are both also significant predictors of health. Further, individually perceived cohesion emerges as a more important explanation of self-rated health than neighborhood-level social cohesion. Finally, neighborhood disorder and perceived cohesion interact to influence health, such that cohesion is especially beneficial when residents live in neighborhoods characterized by low to moderate disorder; once disorder is at high levels, cohesion no longer offers protection against poor health. We interpret our findings as they relate to prior research on neighborhoods, psychosocial processes, and health, and discuss their implications for intervention efforts that address disorder in urban communities.

  10. Representing Matrix Cracks Through Decomposition of the Deformation Gradient Tensor in Continuum Damage Mechanics Methods

    NASA Technical Reports Server (NTRS)

    Leone, Frank A., Jr.

    2015-01-01

    A method is presented to represent the large-deformation kinematics of intraply matrix cracks and delaminations in continuum damage mechanics (CDM) constitutive material models. The method involves the additive decomposition of the deformation gradient tensor into 'crack' and 'bulk material' components. The response of the intact bulk material is represented by a reduced deformation gradient tensor, and the opening of an embedded cohesive interface is represented by a normalized cohesive displacement-jump vector. The rotation of the embedded interface is tracked as the material deforms and as the crack opens. The distribution of the total local deformation between the bulk material and the cohesive interface components is determined by minimizing the difference between the cohesive stress and the bulk material stress projected onto the cohesive interface. The improvements to the accuracy of CDM models that incorporate the presented method over existing approaches are demonstrated for a single element subjected to simple shear deformation and for a finite element model of a unidirectional open-hole tension specimen. The material model is implemented as a VUMAT user subroutine for the Abaqus/Explicit finite element software. The presented deformation gradient decomposition method reduces the artificial load transfer across matrix cracks subjected to large shearing deformations, and avoids the spurious secondary failure modes that often occur in analyses based on conventional progressive damage models.

  11. Strong adhesion and cohesion of chitosan in aqueous solutions

    PubMed Central

    Lee, Dong Woog; Lim, Chanoong; Israelachvili, Jacob N.; Hwang, Dong Soo

    2014-01-01

    Chitosan, a load-bearing biomacromolecule found in the exoskeletons of crustaceans and insects, is a promising biopolymer for the replacement of synthetic plastic compounds. Here, surface interactions mediated by chitosan in aqueous solutions, including the effects of pH and contact time, were investigated using a surface forces apparatus (SFA). Chitosan films showed an adhesion to mica for all tested pH ranges (3.0–8.5), achieving a maximum value at pH 3.0 after a contact time of 1 hr (Wad ~6.4 mJ/m2). We also found weak or no cohesion between two opposing chitosan layers on mica in aqueous buffer until the critical contact time for maximum adhesion (chitosan-mica) was reached. Strong cohesion (Wco ~8.5 mJ/m2) between the films was measured with increasing contact times up to 1 hr at pH 3.0, which is equivalent to ~60% of the strongest, previously reported, mussel underwater adhesion. Such time-dependent adhesion properties are most likely related to molecular or molecular group reorientations and interdigitations. At high pH (8.5), the solubility of chitosan changes drastically, causing the chitosan-chitosan (cohesion) interaction to be repulsive at all separation distances and contact times. The strong contact time and pH-dependent chitosan-chitosan cohesion and adhesion properties provide new insight into the development of chitosan based load-bearing materials. PMID:24138057

  12. Fluctuations of the experience of togetherness within the team over time: task-cohesion and shared understanding throughout a sporting regular season.

    PubMed

    Bourbousson, Jérôme; Fortes-Bourbousson, Marina

    2017-06-01

    Based on a diagnosis action research design, the present study assessed the fluctuations of the team experience of togetherness. Reported experiences of 12 basketball team members playing in the under-18 years old national championship were studied during a four-month training and competitive period. Time series analysis (Auto-Regressive Integrated Moving Average procedures) served to describe temporal properties of the way in which the fluctuations of task-cohesion and shared understanding were step-by-step experienced over time, respectively. Correlations, running-correlations and cross-lagged correlations were used to describe the temporal links that governed the relationships between both phenomena. The results indicated that the task-cohesion dimensions differed mainly for shared understanding dynamics in that their time fluctuations were not embedded in external events, and that the variations in shared understanding tend to precede 'individual attractions to the task' variations with seven team practical sessions. This study argues for further investigation of how 'togetherness' is experienced alternatively as a feeling of cohesion or shared understanding. Practitioner Summary: The present action research study investigated the experience that the team members have to share information during practice, and the subsequent benefices on team cohesion. Results call for specific interventions that make team members accept the fluctuating nature of team phenomena, to help them maintaining their daily efforts.

  13. U-PLANT GEOGRAPHIC ZONE CLEANUP PROTOTYPE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    ROMINE, L.D.

    2006-02-01

    The U Plant geographic zone (UPZ) occupies 0.83 square kilometers on the Hanford Site Central Plateau (200 Area). It encompasses the U Plant canyon (221-U Facility), ancillary facilities that supported the canyon, soil waste sites, and underground pipelines. The UPZ cleanup initiative coordinates the cleanup of the major facilities, ancillary facilities, waste sites, and contaminated pipelines (collectively identified as ''cleanup items'') within the geographic zone. The UPZ was selected as a geographic cleanup zone prototype for resolving regulatory, technical, and stakeholder issues and demonstrating cleanup methods for several reasons: most of the area is inactive, sufficient characterization information is availablemore » to support decisions, cleanup of the high-risk waste sites will help protect the groundwater, and the zone contains a representative cross-section of the types of cleanup actions that will be required in other geographic zones. The UPZ cleanup demonstrates the first of 22 integrated zone cleanup actions on the Hanford Site Central Plateau to address threats to groundwater, the environment, and human health. The UPZ contains more than 100 individual cleanup items. Cleanup actions in the zone will be undertaken using multiple regulatory processes and decision documents. Cleanup actions will include building demolition, waste site and pipeline excavation, and the construction of multiple, large engineered barriers. In some cases, different cleanup actions may be taken at item locations that are immediately adjacent to each other. The cleanup planning and field activities for each cleanup item must be undertaken in a coordinated and cohesive manner to ensure effective execution of the UPZ cleanup initiative. The UPZ zone cleanup implementation plan (ZCIP) was developed to address the need for a fundamental integration tool for UPZ cleanup. As UPZ cleanup planning and implementation moves forward, the ZCIP is intended to be a living document that will provide a focal point for integrating UPZ actions, including field cleanup activities, waste staging and handling, and post-cleanup monitoring and institutional controls.« less

  14. Tsunamigenic earthquake simulations using experimentally derived friction laws

    NASA Astrophysics Data System (ADS)

    Murphy, S.; Di Toro, G.; Romano, F.; Scala, A.; Lorito, S.; Spagnuolo, E.; Aretusini, S.; Festa, G.; Piatanesi, A.; Nielsen, S.

    2018-03-01

    Seismological, tsunami and geodetic observations have shown that subduction zones are complex systems where the properties of earthquake rupture vary with depth as a result of different pre-stress and frictional conditions. A wealth of earthquakes of different sizes and different source features (e.g. rupture duration) can be generated in subduction zones, including tsunami earthquakes, some of which can produce extreme tsunamigenic events. Here, we offer a geological perspective principally accounting for depth-dependent frictional conditions, while adopting a simplified distribution of on-fault tectonic pre-stress. We combine a lithology-controlled, depth-dependent experimental friction law with 2D elastodynamic rupture simulations for a Tohoku-like subduction zone cross-section. Subduction zone fault rocks are dominantly incohesive and clay-rich near the surface, transitioning to cohesive and more crystalline at depth. By randomly shifting along fault dip the location of the high shear stress regions ("asperities"), moderate to great thrust earthquakes and tsunami earthquakes are produced that are quite consistent with seismological, geodetic, and tsunami observations. As an effect of depth-dependent friction in our model, slip is confined to the high stress asperity at depth; near the surface rupture is impeded by the rock-clay transition constraining slip to the clay-rich layer. However, when the high stress asperity is located in the clay-to-crystalline rock transition, great thrust earthquakes can be generated similar to the Mw 9 Tohoku (2011) earthquake.

  15. The Development and Use of Cohesive Devices in L2 Writing and Their Relations to Judgments of Essay Quality

    ERIC Educational Resources Information Center

    Crossley, Scott A.; Kyle, Kristopher; McNamara, Danielle S.

    2016-01-01

    An important topic in writing research has been the use of cohesive features. Much of this research has focused on local and text cohesion. The few studies that have studied global cohesion have been restricted to first language writing. This study investigates the development of local, global, and text cohesion in the writing of 57 language (L2)…

  16. The Efficacy of ’Don’t Ask, Don’t Tell’

    DTIC Science & Technology

    2009-01-01

    psychologists explored the concepts, experimental and cor- relation evidence supported dividing cohesion into two distinct types: social cohesion and task...cohesion. Social cohesion is the nature and quality of the emotional bonds within a group—the degree to which members spend time together, like...along (that is, has high social cohesion ) would perform better. Almost counterintuitively, it has been shown that in some situations, high social

  17. The Impact of Drug Abuse on Tank Crew Cohesion.

    DTIC Science & Technology

    1982-08-01

    social cohesion ). Examination ef modal scores on the Cohesion Questions indicated that similarity or difference in drug use pattern influenced the...demography, drug use and social cohesion . The AFFIL scores were divided into two groups: Hi AFFEL and Lo AFFIL. The Hi AFFIL group was comprised of...difference in usage pattern, the social cohesion questions were slightly more sensitive to simple similarity in drug use pattern than the job-related

  18. Outdoor activities and depressive symptoms in displaced older adults following natural disaster: community cohesion as mediator and moderator.

    PubMed

    Chao, Shiau-Fang

    2016-09-01

    This investigation examined whether community cohesion mediates or moderates the relationship between outdoor activities and depressive symptoms in older adults displaced by Typhoon Morakot in Taiwan. This cross-sectional study included 292 adults aged 65 years or older who were relocated to permanent houses after Typhoon Morakot damaged their homes on 8th August 2009. Multiple regression analysis was applied to test the role of community cohesion on the association between outdoor activities and depressive symptoms. The sample of displaced older adults displayed higher prevalence of depressive symptoms than the average for community dwelling older people in Taiwan. Community cohesion fully mediated the relationship between outdoor activities and depressive symptoms. Community cohesion also moderated the relationship between outdoor activities and depressive symptoms. Community cohesion occupies a key role on the link between outdoor activities and depressive symptoms. Participation in outdoor activities was associated positively with community cohesion, while high community cohesion was related negatively to depressive symptoms. Additionally, the benefit of outdoor activities to fewer depressive symptoms only manifested in older adults with high community cohesion. Programs and services should be designed to enhance community cohesion in order to maximize the benefit of outdoor activities to the mental health of displaced older adults after natural disasters.

  19. Spilling over: Partner parenting stress as a predictor of family cohesion in parents of adolescents with developmental disabilities.

    PubMed

    Mitchell, Darcy B; Szczerepa, Alexandra; Hauser-Cram, Penny

    2016-01-01

    Family cohesion relates to positive outcomes for both parents and children. Maintaining cohesion may be especially challenging for families of adolescents with developmental disabilities, yet this has been studied infrequently in this group. We investigated cohesion in these families, particularly with respect to partner stress, using the notion of the 'spillover effect' as a model. Adolescents with disabilities and their parents participated. Parents reported on teen adaptive and problem behaviours and on marital satisfaction, parenting stress, and family cohesion. The stress of one partner was tested as a predictor of the quality of family cohesion reported by the other. Adolescent behaviour problems were negative predictors of family cohesion in mothers, and marital satisfaction positively predicted cohesion for both parents. Above other factors, greater partner stress predicted poorer family cohesion for both fathers and mothers. Marital satisfaction acted as a suppressor of this relation. To improve the overall climate of families, care providers should take into consideration individual relationships, including the marital relationship. In addition, the possibility of spillover from one individual to another should be recognized as a factor in family functioning. Family-centred practices are likely to lead to greater feelings of cohesion and overall better individual and family well-being. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. The Effects Of Physical And Biological Cohesion On Bedforms

    NASA Astrophysics Data System (ADS)

    Parsons, D. R.; Schindler, R.; Baas, J.; Hope, J. A.; Malarkey, J.; Paterson, D. M.; Peakall, J.; Manning, A. J.; Ye, L.; Aspden, R.; Alan, D.; Bass, S. J.

    2014-12-01

    Most coastal sediments consist of complex mixtures of cohesionless sands, physically-cohesive clays and extra cellular polymeric substances (EPS) that impart biological cohesion. Yet, our ability to predict bedform dimensions in these substrates is reliant on predictions based exclusively on cohesionless sand. We present findings from the COHBED project - which explicitly examines how bedform dynamics are modified by natural cohesion. Our experimental results show that for ripples, height and length are inversely proportional to initial clay content and bedforms take longer to appear, with no ripples when clay content exceeds 18%. When clay is replaced by EPS the development time and time of first appearance of ripples both increase by two orders of magnitude, with no bedforms above 0.125% EPS. For dunes, height and length are also inversely proportional to initial substrate clay content, resulting in a transition from dunes to ripples normally associated with velocity decreases. Addition of low EPS concentrations into the substrate results in yet smaller bedforms at the same clay contents and at high EPS concentrations, biological cohesion supersedes all electrostatic bonding, and bedform size is no longer related to mud content. The contrast in physical and biological cohesion effects on bedform development result from the disparity between inter-particle electrostatic bonding of clay particles and EPS grain coating and strands that physically link sediments together, which effects winnowing rates as bedforms evolve. These findings have wide ranging implications for bedform predictions in both modern and ancient environments. Coupling of biological and morphological processes not only requires an understanding of how bedform dimensions influence biota and habitat, but also how benthic species can modify bedform dimensions. Consideration of both aspects provides a means in which fluid dynamics, sediment transport and ecosystem energetics can be linked to yield improved predictions of morphological and habitat adjustment.

  1. The relationship between hardiness, supervisor support, group cohesion, and job stress as predictors of job satisfaction.

    PubMed

    Steinhardt, Mary A; Dolbier, Christyn L; Gottlieb, Nell H; McCalister, Katherine T

    2003-01-01

    This study tested a conceptual model based on research supporting the relationship between the predictors of hardiness, supervisor support, and group cohesion and the criterions of job stress and job satisfaction and between the predictor of job stress and the criterion of job satisfaction. The study employed a cross-sectional research design. Survey data were collected as part of the baseline measures assessed prior to an organizational hardiness intervention. Worksite of Dell Computer Corporation in Austin, Texas. The subjects included 160 full-time Dell employees recruited from a convenience sample representing nine work groups (response rate = 90%). Hardiness was measured using the Dispositional Resilience Scale (DRS), job stress was measured using the Perceived Work Stress Scale (PWSS), and supervisor support, group cohesion, and job satisfaction were measured using a proprietary employee attitude survey. In the proposed model, high hardiness, supervisor support, and group cohesion were related to lower levels of job stress, which in turn was related to higher levels of job satisfaction. The model also proposed direct paths from hardiness, supervisor support, and group cohesion to job satisfaction. Path analysis was used to examine the goodness of fit of the model. The proposed model was a good fit for the data (chi 2[1, N = 160] = 1.85, p = .174) with the exception of the direct path between group cohesion and job satisfaction. Substantial portions of the variances in job stress (R2 = .19) and job satisfaction (R2 = .44) were accounted for by the predictors. Implications for targeted worksite health promotion efforts to lower job stress and enhance job satisfaction are discussed.

  2. The cohesive law of particle/binder interfaces in solid propellants

    NASA Astrophysics Data System (ADS)

    Tan, H.

    2011-10-01

    Solid propellants are treated as composites with high volume fraction of particles embedded in the polymeric binder. A micromechanics model is developed to establish the link between the microscopic behavior of particle/binder interfaces and the macroscopic constitutive information. This model is then used to determine the tension/shearing coupled interface cohesive law of a redesigned solid rocket motor propellant, based on the experimental data of the stress-strain and dilatation-strain curves for the material under slow rate uniaxial tension.

  3. Written cohesion in children with and without language learning disabilities.

    PubMed

    Koutsoftas, Anthony D; Petersen, Victoria

    2017-09-01

    Cohesion refers to the linguistic elements of discourse that contribute to its continuity and is an important element to consider as part of written language intervention, especially in children with language learning disabilities (LLD). There is substantial evidence that children with LLD perform more poorly than typically developing (TD) peers on measures of cohesion in spoken language and on written transcription measures; however, there is far less research comparing groups on cohesion as a measure of written language across genres. The current study addresses this gap through the following two aims. First, to describe and compare cohesion in narrative and expository writing samples of children with and without language learning disabilities. Second, to relate measures of cohesion to written transcription and translation measures, oral language, and writing quality. Fifty intermediate-grade children produced one narrative and one expository writing sample from which measures of written cohesion were obtained. These included the frequency, adequacy and complexity of referential and conjunctive ties. Expository samples resulted in more complex cohesive ties and children with TD used more complex ties than peers with LLD. Different relationships among cohesion measures and writing were observed for narrative verse expository samples. Findings from this study demonstrate cohesion as a discourse-level measure of written transcription and how the use of cohesion can vary by genre and group (LLD, TD). Clinical implications for assessment, intervention, and future research are provided. © 2016 Royal College of Speech and Language Therapists.

  4. Ultimate pier and contraction scour prediction in cohesive soils at selected bridges in Illinois

    USGS Publications Warehouse

    Straub, Timothy D.; Over, Thomas M.; Domanski, Marian M.

    2013-01-01

    The Scour Rate In COhesive Soils-Erosion Function Apparatus (SRICOS-EFA) method includes an ultimate scour prediction that is the equilibrium maximum pier and contraction scour of cohesive soils over time. The purpose of this report is to present the results of testing the ultimate pier and contraction scour methods for cohesive soils on 30 bridge sites in Illinois. Comparison of the ultimate cohesive and noncohesive methods, along with the Illinois Department of Transportation (IDOT) cohesive soil reduction-factor method and measured scour are presented. Also, results of the comparison of historic IDOT laboratory and field values of unconfined compressive strength of soils (Qu) are presented. The unconfined compressive strength is used in both ultimate cohesive and reduction-factor methods, and knowing how the values from field methods compare to the laboratory methods is critical to the informed application of the methods. On average, the non-cohesive method results predict the highest amount of scour, followed by the reduction-factor method results; and the ultimate cohesive method results predict the lowest amount of scour. The 100-year scour predicted for the ultimate cohesive, noncohesive, and reduction-factor methods for each bridge site and soil are always larger than observed scour in this study, except 12% of predicted values that are all within 0.4 ft of the observed scour. The ultimate cohesive scour prediction is smaller than the non-cohesive scour prediction method for 78% of bridge sites and soils. Seventy-six percent of the ultimate cohesive predictions show a 45% or greater reduction from the non-cohesive predictions that are over 10 ft. Comparing the ultimate cohesive and reduction-factor 100-year scour predictions methods for each bridge site and soil, the scour predicted by the ultimate cohesive scour prediction method is less than the reduction-factor 100-year scour prediction method for 51% of bridge sites and soils. Critical shear stress remains a needed parameter in the ultimate scour prediction for cohesive soils. The unconfined soil compressive strength measured by IDOT in the laboratory was found to provide a good prediction of critical shear stress, as measured by using the erosion function apparatus in a previous study. Because laboratory Qu analyses are time-consuming and expensive, the ability of field-measured Rimac data to estimate unconfined soil strength in the critical shear–soil strength relation was tested. A regression analysis was completed using a historic IDOT dataset containing 366 data pairs of laboratory Qu and field Rimac measurements from common sites with cohesive soils. The resulting equations provide a point prediction of Qu, given any Rimac value with the 90% confidence interval. The prediction equations are not significantly different from the identity Qu = Rimac. The alternative predictions of ultimate cohesive scour presented in this study assume Qu will be estimated using Rimac measurements that include computed uncertainty. In particular, the ultimate cohesive predicted scour is greater than observed scour for the entire 90% confidence interval range for predicting Qu at the bridges and soils used in this study, with the exception of the six predicted values that are all within 0.6 ft of the observed scour.

  5. Influence of cross-linkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets.

    PubMed

    Lafont, U; van Zeijl, H; van der Zwaag, S

    2012-11-01

    Synthetic systems with intrinsic self-repairing or self-healing abilities have emerged during the past decade. In this work, the influence of the cross-linker and chain rigidity on the healing ability of thermoset rubbers containing disulfide bonds have been investigated. The produced materials exhibit adhesive and cohesive self-healing properties. The recovery of these two functionalities upon the thermally triggered healing events has shown to be highly dependent on the network cross-link density and chain rigidity. As a result, depending on the rubber thermoset intrinsic physical properties, the thermal mending leading to full cohesive recovery can be achieved in 20-300 min at a modest healing temperature of 65 °C. The adhesive strength ranges from 0.2 to 0.5 MPa and is fully recovered even after multiple failure events.

  6. Does the Drug Facts Label for nonprescription drugs meet its design objectives? A new procedure for assessing label effectiveness

    PubMed Central

    Ryan, Michael P; Costello-White, Reagan N

    2017-01-01

    We demonstrate an expanded procedure for assessing drug-label comprehension. Innovations include a pretest of drug preconceptions, verbal ability and label attentiveness measures, a label-scanning task, a free-recall test, category-clustering measures, and preconception-change scores. In total, 55 female and 39 male undergraduates read a facsimile Drug Facts Label for aspirin, a Cohesive-Prose Label, or a Scrambled-Prose Label. The Drug Facts Label outperformed the Scrambled-Prose Label, but not the Cohesive-Prose Label, in scanning effectiveness. The Drug Facts Label was no better than the Cohesive-Prose Label or the Scrambled-Prose Label in promoting attentiveness, recall and organization of drug facts, or misconception refutation. Discussion focuses on the need for refutational labels based on a sequence-of-events text schema. PMID:29379613

  7. Adaptive Shape Functions and Internal Mesh Adaptation for Modelling Progressive Failure in Adhesively Bonded Joints

    NASA Technical Reports Server (NTRS)

    Stapleton, Scott; Gries, Thomas; Waas, Anthony M.; Pineda, Evan J.

    2014-01-01

    Enhanced finite elements are elements with an embedded analytical solution that can capture detailed local fields, enabling more efficient, mesh independent finite element analysis. The shape functions are determined based on the analytical model rather than prescribed. This method was applied to adhesively bonded joints to model joint behavior with one element through the thickness. This study demonstrates two methods of maintaining the fidelity of such elements during adhesive non-linearity and cracking without increasing the mesh needed for an accurate solution. The first method uses adaptive shape functions, where the shape functions are recalculated at each load step based on the softening of the adhesive. The second method is internal mesh adaption, where cracking of the adhesive within an element is captured by further discretizing the element internally to represent the partially cracked geometry. By keeping mesh adaptations within an element, a finer mesh can be used during the analysis without affecting the global finite element model mesh. Examples are shown which highlight when each method is most effective in reducing the number of elements needed to capture adhesive nonlinearity and cracking. These methods are validated against analogous finite element models utilizing cohesive zone elements.

  8. Social cohesion matters in health

    PubMed Central

    2013-01-01

    Introduction The concept of social cohesion has invoked debate due to the vagueness of its definition and the limitations of current measurements. This paper attempts to examine the concept of social cohesion, develop measurements, and investigate the relationship between social cohesion and individual health. Methods This study used a multilevel study design. The individual-level samples from 29 high-income countries were obtained from the 2000 World Value Survey (WVS) and the 2002 European Value Survey. National-level social cohesion statistics were obtained from Organization of Economic Cooperation and Development datasets, World Development Indicators, and Asian Development Bank key indicators for the year 2000, and from aggregating responses from the WVS. In total 47,923 individuals were included in this study. The factor analysis was applied to identify dimensions of social cohesion, which were used as entities in the cluster analysis to generate a regime typology of social cohesion. Then, multilevel regression models were applied to assess the influences of social cohesion on an individual’s self-rated health. Results and discussion Factor analysis identified five dimensions of social cohesion: social equality, social inclusion, social development, social capital, and social diversity. Then, the cluster analysis revealed five regimes of social cohesion. A multi-level analysis showed that respondents in countries with higher social inclusion, social capital, and social diversity were more likely to report good health above and beyond individual-level characteristics. Conclusions This study is an innovative effort to incorporate different aspects of social cohesion. This study suggests that social cohesion was associated with individual self-rated after controlling individual characteristics. To achieve further advancement in population health, developed countries should consider policies that would foster a society with a high level of social inclusion, social capital, and social diversity. Future research could focus on identifying possible pathways by which social cohesion influences various health outcomes. PMID:24165541

  9. Factors Related to Group Cohesiveness.

    ERIC Educational Resources Information Center

    Roark, Albert E.; Sharah, Hussein S.

    1989-01-01

    Investigated the relationship of group cohesiveness to empathy, self-disclosure, acceptance, and trust, and compared three different groups (personal growth, driving under the influence, psychotherapy), with a total of 65 subjects, on measures of cohesiveness. Found all factors correlated significantly with cohesiveness and with one another.…

  10. Alcohol Use Severity Among Adult Hispanic Immigrants: Examining the Roles of Family Cohesion, Social Support, and Gender.

    PubMed

    Cano, Miguel Ángel; Sánchez, Mariana; Rojas, Patria; Ramírez-Ortiz, Daisy; Polo, Katherine L; Romano, Eduardo; De La Rosa, Mario

    2018-03-21

    This study examined (a) the direct association of family cohesion on alcohol use severity among adult Hispanic immigrants; (b) the indirect association of family cohesion on alcohol use severity via social support; and (c) if gender moderates the direct and indirect associations between family cohesion and alcohol use severity. Mediation and moderation analyses were conducted on a cross-sectional sample of 411 (men = 222, women = 189) participants from Miami-Dade, Florida. Findings indicate that higher family cohesion was directly associated with higher social support and lower alcohol use severity. Higher social support was also directly associated with lower alcohol use severity. Additionally, family cohesion had an indirect association with alcohol use severity via social support. Moderation analyses indicated that gender moderated the direct association between family cohesion and alcohol use severity, but did not moderate the indirect association. Some potential clinical implications may be that strengthening family cohesion may enhance levels of social support, and in turn, lower alcohol use severity among adult Hispanic immigrants. Furthermore, strengthening family cohesion may be especially beneficial to men in efforts to lower levels of alcohol use severity.

  11. A sign of the times: To have or to be? Social capital or social cohesion?

    PubMed

    Carrasco, Maria A; Bilal, Usama

    2016-06-01

    Among various social factors associated with health behavior and disease, social cohesion has not captured the imagination of public health researchers as much as social capital as evidenced by the subsuming of social cohesion into social capital and the numerous studies analyzing social capital and the comparatively fewer articles analyzing social cohesion and health. In this paper we provide a brief overview of the evolution of the conceptualization of social capital and social cohesion and we use philosopher Erich Fromm's distinction between "having" and "being" to understand the current research focus on capital over cohesion. We argue that social capital is related to having while social cohesion is related to being and that an emphasis on social capital leads to individualizing tendencies that are antithetical to cohesion. We provide examples drawn from the literature where this conflation of social capital and cohesion results in non-concordant definitions and subsequent operationalization of these constructs. Beyond semantics, the practical implication of focusing on "having" vs. "being" include an emphasis on understanding how to normalize groups and populations rather than providing those groups space for empowerment and agency leading to health. Published by Elsevier Ltd.

  12. Familial Influences on Dating Violence Victimization Among Latino Youth.

    PubMed

    Reyes, H Luz McNaughton; Foshee, Vangie A; Klevens, Joanne; Tharp, Andra Teten; Chapman, Mimi V; Chen, May S; Ennett, Susan T

    2016-01-01

    Despite theoretical and empirical evidence suggesting that the family environment plays a central role in Latino youth development, relatively little is known about how family processes influence dating violence victimization among Latino adolescents. To address this gap in the literature, we used data from 210 Latino parents and their 13- to 15-year-old adolescents to examine associations between several different family processes, including both parenting practices (parent monitoring, parent-adolescent communication) and aspects of the family relational climate (family cohesion, family conflict, acculturation conflict) and psychological, physical, and sexual dating violence victimization. Consistent with expectations, lower levels of family cohesion and higher levels of family and acculturation conflict were associated with risk for dating violence victimization, although associations varied depending on victimization type. In contrast, neither parental monitoring nor parent-adolescent communication was significantly associated with any type of dating violence victimization. In addition, we found that parent, but not teen, Anglo-American acculturation was associated with higher dating violence victimization risk. Findings suggest that family-based dating abuse prevention programs for Latino youth should seek to increase family cohesion and decrease family conflict, including acculturation-based conflict.

  13. Portraying the Contribution of Individual Behaviors to Team Cohesion and Performance

    NASA Technical Reports Server (NTRS)

    Parke, Bonny; Orasanu, Judith

    2012-01-01

    Behaviors of individuals in teams both contribute to and are molded by team dynamics. How they do so has been the subject of much research. A method of portraying individuals' behaviors in teams, the Team Diagramming Method (TDM) is presented. Behaviors are rated by other team members on three important dimensions: positivity/negativity, dominant/submissive, and task-orientedness/expressiveness. A study of 5-person teams engaging in a 3-day moon simulation task demonstrated that measures of these perceived behaviors as well as the variances of these behaviors correlated with cohesion measures and performance. The method shows strengths and weaknesses of particular teams and, by comparison with high-performing teams, suggests interventions based on individual as well as team behaviors. The primary goal of this study was to determine the extent to which these team level variables, derived from all team members' rated behaviors, were associated with previous methods of measuring cohesion and with performance. A secondary goal was to determine the stability of TDM measures over time by comparing team level variables based on ratings early and later in the team s work together.

  14. Don’t Ask, Don’t Tell: Failing in Strategic Leadership

    DTIC Science & Technology

    2007-03-30

    another example of where the results might be useful. Even if 7 one accepts the fact that task cohesion overrides social cohesion as a major...it can be inferred that social cohesion is still an important factor in combat. At this point the important question becomes whether openly gay...Gateway, 1993), 57. 17 39 Social cohesion refers to emotional bonds and friendship, and is distinguished from task cohesion which refers to a group’s

  15. Geotechnical properties of municipal solid waste at different phases of biodegradation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reddy, Krishna R., E-mail: kreddy@uic.edu; Hettiarachchi, Hiroshan, E-mail: hiroshan@ltu.edu; Gangathulasi, Janardhanan, E-mail: jganga2@uic.edu

    Highlights: > Degraded synthetic municipal solid waste (MSW) anaerobically in controlled bench-scale reactors. > Performed laboratory tests to determine geotechnical properties of MSW at different phases of degradation. > Hydraulic conductivity decreased by two orders of magnitude due to degradation. > Compression ratio reduced from 0.34 for initial fresh waste to 0.15 for the mostly degraded waste. > Friction angle reduced, but cohesion increased with degradation. - Abstract: This paper presents the results of laboratory investigation conducted to determine the variation of geotechnical properties of synthetic municipal solid waste (MSW) at different phases of degradation. Synthetic MSW samples were preparedmore » based on the composition of MSW generated in the United States and were degraded in bioreactors with leachate recirculation. Degradation of the synthetic MSW was quantified based on the gas composition and organic content, and the samples exhumed from the bioreactor cells at different phases of degradation were tested for the geotechnical properties. Hydraulic conductivity, compressibility and shear strength of initial and degraded synthetic MSW were all determined at constant initial moisture content of 50% on wet weight basis. Hydraulic conductivity of synthetic MSW was reduced by two orders of magnitude due to degradation. Compression ratio was reduced from 0.34 for initial fresh waste to 0.15 for the mostly degraded waste. Direct shear tests showed that the fresh and degraded synthetic MSW exhibited continuous strength gain with increase in horizontal deformation, with the cohesion increased from 1 kPa for fresh MSW to 16-40 kPa for degraded MSW and the friction angle decreased from 35{sup o} for fresh MSW to 28{sup o} for degraded MSW. During the triaxial tests under CU condition, the total strength parameters, cohesion and friction angle, were found to vary from 21 to 57 kPa and 1{sup o} to 9{sup o}, respectively, while the effective strength parameters, cohesion and friction angle varied from 18 to 56 kPa and from 1{sup o} to 11{sup o}, respectively. Similar to direct shear test results, as the waste degrades an increase in cohesion and slight decrease in friction angle was observed. Decreased friction angle and increased cohesion with increased degradation is believed to be due to the highly cohesive nature of the synthetic MSW. Variation of synthetic MSW properties from this study also suggests that significant changes in geotechnical properties of MSW can occur due to enhanced degradation induced by leachate recirculation.« less

  16. Interactive effects of team cohesion on perceived efficacy in semi-professional sport.

    PubMed

    Marcos, Francisco Miguel Leo; Miguel, Pedro Antonio Sánchez; Oliva, David Sánchez; Calvo, Tomás García

    2010-01-01

    The present study examined the relationships among cohesion, self-efficacy, coaches' perceptions of their players' efficacy at the individual level and athletes' perceptions of their teammates' efficacy. Participants (n = 76) recruited from four semi- professional soccer and basketball teams completed cohesiveness and efficacy questionnaires who. Data were analyzed through a correlational methodology. Results indicated significant correlations between self-efficacy and task cohesion and social cohesion. Regression analysis results suggest task cohesion positively related to coaches and teammate's perception of efficacy. These results have implications for practitioners in terms of the importance of team building to enhance team cohesion and feelings of efficacy. Key pointsThis paper increases the knowledge about soccer and basketball match analysis.Give normative values to establish practice and match objectives.Give applications ideas to connect research with coaches' practice.

  17. Rotational Failure of Rubble-pile Bodies: Influences of Shear and Cohesive Strengths

    NASA Astrophysics Data System (ADS)

    Zhang, Yun; Richardson, Derek C.; Barnouin, Olivier S.; Michel, Patrick; Schwartz, Stephen R.; Ballouz, Ronald-Louis

    2018-04-01

    The shear and cohesive strengths of a rubble-pile asteroid could influence the critical spin at which the body fails and its subsequent evolution. We present results using a soft-sphere discrete element method to explore the mechanical properties and dynamical behaviors of self-gravitating rubble piles experiencing increasing rotational centrifugal forces. A comprehensive contact model incorporating translational and rotational friction and van der Waals cohesive interactions is developed to simulate rubble-pile asteroids. It is observed that the critical spin depends strongly on both the frictional and cohesive forces between particles in contact; however, the failure behaviors only show dependence on the cohesive force. As cohesion increases, the deformation of the simulated body prior to disruption is diminished, the disruption process is more abrupt, and the component size of the fissioned material is increased. When the cohesive strength is high enough, the body can disaggregate into similar-size fragments, which could be a plausible mechanism to form asteroid pairs or active asteroids. The size distribution and velocity dispersion of the fragments in high-cohesion simulations show similarities to the disintegrating asteroid P/2013 R3, indicating that this asteroid may possess comparable cohesion in its structure and experience rotational fission in a similar manner. Additionally, we propose a method for estimating a rubble pile’s friction angle and bulk cohesion from spin-up numerical experiments, which provides the opportunity for making quantitative comparisons with continuum theory. The results show that the present technique has great potential for predicting the behaviors and estimating the material strengths of cohesive rubble-pile asteroids.

  18. Modeling reciprocal team cohesion-performance relationships, as impacted by shared leadership and members' competence.

    PubMed

    Mathieu, John E; Kukenberger, Michael R; D'Innocenzo, Lauren; Reilly, Greg

    2015-05-01

    Despite the lengthy history of team cohesion-performance research, little is known about their reciprocal relationships over time. Using meta-analysis, we synthesize findings from 17 CLP design studies, and analyze their results using SEM. Results support that team cohesion and performance are related reciprocally with each other over time. We then used longitudinal data from 205 members of 57 student teams who competed in a complex business simulation over 10 weeks, to test: (a) whether team cohesion and performance were related reciprocally over multiple time periods, (b) the relative magnitude of those relationships, and (c) whether they were stable over time. We also considered the influence of team members' academic competence and degree of shared leadership on these dynamics. As anticipated, cohesion and performance were related positively, and reciprocally, over time. However, the cohesion → performance relationship was significantly higher than the performance → cohesion relationship. Moreover, the cohesion → performance relationship grew stronger over time whereas the performance → cohesion relationship remained fairly consistent over time. As expected, shared leadership related positively to team cohesion but not directly to their performance; whereas average team member academic competence related positively to team performance but was unrelated to team cohesion. Finally, we conducted and report a replication using a second sample of students competing in a business simulation. Our earlier substantive relationships were mostly replicated, and we illustrated the dynamic temporal properties of shared leadership. We discuss these findings in terms of theoretical importance, applied implications, and directions for future research. (c) 2015 APA, all rights reserved.

  19. Intact Discourse Cohesion and Coherence Following Bilateral Ventromedial Prefrontal Cortex

    ERIC Educational Resources Information Center

    Kurczek, Jake; Duff, Melissa C.

    2012-01-01

    Discourse cohesion and coherence give communication its continuity providing the grammatical and lexical links that hold an utterance or text together and give it meaning. Researchers often link cohesion and coherence deficits to the frontal lobes by drawing attention to frontal lobe dysfunction in populations where discourse cohesion and…

  20. Nonequivalent Associations between Forms of Cohesiveness and Group-Related Outcomes: Evidence for Multidimensionality.

    ERIC Educational Resources Information Center

    Zaccaro, Stephen J.

    1991-01-01

    Presents results of a study contrasting different forms of group cohesiveness in a student military organization. Reports that task cohesiveness was more strongly associated with lower role uncertainty, higher individual performance, and lower absenteeism than was interpersonal cohesiveness. Concludes that data provide evidence for a…

  1. Building a Board that Sticks Together

    ERIC Educational Resources Information Center

    Wilson, E. B.

    2006-01-01

    High-performing boards operating at a distinguishable level of excellence, all exhibit a culture of cohesiveness. And a compelling codicil is that these boards did not deliberately set out to become cohesive and perhaps do not even know they are cohesive. This article examines the value of cohesion to university governing boards, explicitly…

  2. Maximum sinking velocities of suspended particulate matter in a coastal transition zone

    NASA Astrophysics Data System (ADS)

    Maerz, Joeran; Hofmeister, Richard; van der Lee, Eefke M.; Gräwe, Ulf; Riethmüller, Rolf; Wirtz, Kai W.

    2016-09-01

    Marine coastal ecosystem functioning is crucially linked to the transport and fate of suspended particulate matter (SPM). Transport of SPM is controlled by, amongst other factors, sinking velocity ws. Since the ws of cohesive SPM aggregates varies significantly with size and composition of the mineral and organic origin, ws exhibits large spatial variability along gradients of turbulence, SPM concentration (SPMC) and SPM composition. In this study, we retrieved ws for the German Bight, North Sea, by combining measured vertical turbidity profiles with simulation results for turbulent eddy diffusivity. We analyzed ws with respect to modeled prevailing dissipation rates ɛ and found that mean ws were significantly enhanced around log10(ɛ (m2 s-3)) ≈ -5.5. This ɛ region is typically found at water depths of approximately 15 to 20 m along cross-shore transects. Across this zone, SPMC declines towards the offshore waters and a change in particle composition occurs. This characterizes a transition zone with potentially enhanced vertical fluxes. Our findings contribute to the conceptual understanding of nutrient cycling in the coastal region which is as follows. Previous studies identified an estuarine circulation. Its residual landward-oriented bottom currents are loaded with SPM, particularly within the transition zone. This retains and traps fine sediments and particulate-bound nutrients in coastal waters where organic components of SPM become remineralized. Residual surface currents transport dissolved nutrients offshore, where they are again consumed by phytoplankton. Algae excrete extracellular polymeric substances which are known to mediate mineral aggregation and thus sedimentation. This probably takes place particularly in the transition zone and completes the coastal nutrient cycle. The efficiency of the transition zone for retention is thus suggested as an important mechanism that underlies the often observed nutrient gradients towards the coast.

  3. Predicting the behavior of novel sugar carriers for dry powder inhaler formulations via the use of a cohesive-adhesive force balance approach.

    PubMed

    Hooton, Jennifer C; Jones, Matthew D; Price, Robert

    2006-06-01

    The aim of this work was to utilize the recently developed cohesive-adhesive balance (CAB) technique for analyzing quantitative AFM measurements to compare the relative forces of interaction of micronized salbutamol sulfate particles and a selection of specifically grown sugar substrates (beta cyclodextrin, lactose, raffinose, trehalose and xylitol). The interfacial behavior was subsequently related to the in-vitro delivery performance of these sugars as carrier particles in dry powder inhalation (DPI) formulations. The CAB analysis indicated that the rank order of adhesion between salbutamol sulfate and the sugars was beta cyclodextrin < lactose < trehalose < raffinose < xylitol. The beta cyclodextrin was the only substrate with which salbutamol sulfate demonstrated a greater cohesive behavior. All other sugars exhibited an adhesive dominance. In-vitro deposition performance of the salbutamol sulfate based carrier DPI formulations showed that the rank order of the fine particle fraction (FPF) was beta cyclodextrin > lactose > raffinose > trehalose > xylitol. A linear correlation (R(2) = 0.9572) was observed between the FPF and cohesive-adhesive ratios of the AFM force measurements. The observed link between CAB analysis of the interactive forces and in-vitro performance of carrier based formulations suggested a fundamental understanding of the relative balance of the various forces of interaction within a dry powder formulation may provide a critical insight into the behavior of these formulations. (c) 2006 Wiley-Liss, Inc. and the American Pharmacists Association

  4. CrossTalk, The Journal of Defense Software Engineering. Volume 28 Number 1. Jan/Feb 2015

    DTIC Science & Technology

    2015-02-01

    5.63 1.03 Positive Gain 1.19 42% 1.10 27% 1.20 31% 0.44 12% Table 7. Group 1 & 2 Pretest and Posttest Means and Gain Scores. The one ...linked to team performance [6][7][8] and is considered one of the most important small group variables [9] with cohesion-performance being driven by...increased team cohesion. Measuring Cohesion In order to measure team cohesion, one must first understand the correlated cohesion constructs. The Group

  5. A thermodynamically consistent discontinuous Galerkin formulation for interface separation

    DOE PAGES

    Versino, Daniele; Mourad, Hashem M.; Dávila, Carlos G.; ...

    2015-07-31

    Our paper describes the formulation of an interface damage model, based on the discontinuous Galerkin (DG) method, for the simulation of failure and crack propagation in laminated structures. The DG formulation avoids common difficulties associated with cohesive elements. Specifically, it does not introduce any artificial interfacial compliance and, in explicit dynamic analysis, it leads to a stable time increment size which is unaffected by the presence of stiff massless interfaces. This proposed method is implemented in a finite element setting. Convergence and accuracy are demonstrated in Mode I and mixed-mode delamination in both static and dynamic analyses. Significantly, numerical resultsmore » obtained using the proposed interface model are found to be independent of the value of the penalty factor that characterizes the DG formulation. By contrast, numerical results obtained using a classical cohesive method are found to be dependent on the cohesive penalty stiffnesses. The proposed approach is shown to yield more accurate predictions pertaining to crack propagation under mixed-mode fracture because of the advantage. Furthermore, in explicit dynamic analysis, the stable time increment size calculated with the proposed method is found to be an order of magnitude larger than the maximum allowable value for classical cohesive elements.« less

  6. Guidelines and Parameter Selection for the Simulation of Progressive Delamination

    NASA Technical Reports Server (NTRS)

    Song, Kyongchan; Davila, Carlos G.; Rose, Cheryl A.

    2008-01-01

    Turon s methodology for determining optimal analysis parameters for the simulation of progressive delamination is reviewed. Recommended procedures for determining analysis parameters for efficient delamination growth predictions using the Abaqus/Standard cohesive element and relatively coarse meshes are provided for single and mixed-mode loading. The Abaqus cohesive element, COH3D8, and a user-defined cohesive element are used to develop finite element models of the double cantilever beam specimen, the end-notched flexure specimen, and the mixed-mode bending specimen to simulate progressive delamination growth in Mode I, Mode II, and mixed-mode fracture, respectively. The predicted responses are compared with their analytical solutions. The results show that for single-mode fracture, the predicted responses obtained with the Abaqus cohesive element correlate well with the analytical solutions. For mixed-mode fracture, it was found that the response predicted using COH3D8 elements depends on the damage evolution criterion that is used. The energy-based criterion overpredicts the peak loads and load-deflection response. The results predicted using a tabulated form of the BK criterion correlate well with the analytical solution and with the results predicted with the user-written element.

  7. Social Determinants of Depression: Social Cohesion, Negative Life Events, and Depression Among People Living with HIV/Aids in Nigeria, West Africa.

    PubMed

    Shittu, Rasaki O; Issa, Baba A; Olanrewaju, Ganiyu T; Mahmoud, Abdulraheem O; Odeigah, Louis O; Sule, Abdullateef G

    2014-01-01

    People Living with HIV/AIDS (PLWHA) continue to face persistent and deep rooted social barriers. Incidentally, studies in social determinants of depression are very limited, necessitating this study, which examined social determinants of depression and the impact of these determinants on depression. This was a hospital based, cross sectional descriptive study of three hundred adult HIV/AIDS patients, attending the HIV clinic of Kwara State Specialist Hospital, Sobi, Ilorin, Nigeria. Depressive symptoms were measured by the PHQ-9 rating scale. Three variables of social determinants of depression: socio-economic status (years of school and self-reported economic status of family), social cohesion, and negative life events were examined. The self-reported economic status of the family varied from good 35(11.7%), average 162(54%), and poor among 103(34.3%) of the respondents. Social cohesion was low in 199(66.3%), fair in 65(21.7%) and high among 36(12%) of the respondents. There was significant association between social cohesion, negative life events, and depression. Income was the most significant socio-economic determinant. Majority had very low social cohesion and more negative life events, while those with below average years of schooling were more depressed. These are statistically significant. Social determinants of depression should be given a lot of emphasis, when addressing the issue of depression, if we are to meaningfully tackle this increasing scourge in our society.

  8. Development of a Two-fluid Drag Law for Clustered Particles using Direct Numerical Simulation and Validation through Experiments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gokaltun, Seckin; Munroe, Norman; Subramaniam, Shankar

    2014-12-31

    This study presents a new drag model, based on the cohesive inter-particle forces, implemented in the MFIX code. This new drag model combines an existing standard model in MFIX with a particle-based drag model based on a switching principle. Switches between the models in the computational domain occur where strong particle-to-particle cohesion potential is detected. Three versions of the new model were obtained by using one standard drag model in each version. Later, performance of each version was compared against available experimental data for a fluidized bed, published in the literature and used extensively by other researchers for validation purposes.more » In our analysis of the results, we first observed that standard models used in this research were incapable of producing closely matching results. Then, we showed for a simple case that a threshold is needed to be set on the solid volume fraction. This modification was applied to avoid non-physical results for the clustering predictions, when governing equation of the solid granular temperate was solved. Later, we used our hybrid technique and observed the capability of our approach in improving the numerical results significantly; however, improvement of the results depended on the threshold of the cohesive index, which was used in the switching procedure. Our results showed that small values of the threshold for the cohesive index could result in significant reduction of the computational error for all the versions of the proposed drag model. In addition, we redesigned an existing circulating fluidized bed (CFB) test facility in order to create validation cases for clustering regime of Geldart A type particles.« less

  9. Effect of water on slip weakening of cohesive rocks during earthquakes (EMRP Division Outstanding ECS Award Lecture)

    NASA Astrophysics Data System (ADS)

    Violay, Marie; Alejandro Acosta, Mateo; Passelegue, François; Schubnel, Alexandre

    2017-04-01

    Fluids play an important role in fault zone and in earthquakes generation. Experimental studies of fault frictional properties in presence of fluid can provide unique insights into this phenomenon. Here we compare rotary shear experiments and tri-axial stick slip tests performed on cohesive silicate-bearing rocks (gabbro and granite) in the presence of fluids. Surprisingly, for both type of tests, the weakening mechanism (melting of the asperities) is hindered in the presence of water. Indeed, in rotary shear experiments, at a given effective normal stress (σn-pf), the decay in friction is more gradual and longer in the presence of pore water (32% of friction drop after 20 mm of slip) than under room humidity (41% after 20 mm of slip) and vacuum conditions (60% after 20 mm of slip). During stick slip tests, at a given effective confining pressure (Pc-pf), the dynamic shear stress drops are lower ( 30%) and slip distances were shorter ( 30 to 40%) in the presence of high pressure pore water (Pc=95 MPa; Pf=25 MPa) than under room humidity conditions (Pc=70 MPa; Pf=0 MPa). Thermal modeling of the asperity contacts under load shows that the presence of fluids cools the asperities and delays the formation of melt patches, increasing weakening duration.

  10. Does neighborhood social cohesion modify the relationship between neighborhood social norms and smoking behaviors in Mexico?

    PubMed

    Lozano, Paula; Fleischer, Nancy L; Moore, Spencer; Shigematsu, Luz Myriam Reynales; Santillán, Edna Arillo; Thrasher, James F

    2016-07-01

    The aim of this study was to examine the separate and combined relationships of neighborhood social norms and neighborhood social cohesion with smoking behavior in a cohort of adult Mexican smokers. Neighborhood anti-smoking norms were measured as the proportion of residents in each neighborhood who believed that society disapproves of smoking. Perceived social cohesion was measured using a 5-item cohesion scale and aggregated to the neighborhood level. Higher neighborhood anti-smoking norms were associated with less successful quitting. Neighborhood social cohesion modified the relationship between neighborhood social norms and two smoking behaviors: smoking intensity and quit attempts. Residents of neighborhoods with weaker anti-smoking norms and higher social cohesion had lower smoking intensity and more quit attempts than residents living in other areas. Social cohesion may help buffer smoking behavior in areas with weak social norms. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Microstructure and crystallographic preferred orientation of polycrystalline microgarnet aggregates developed during progressive creep, recovery, and grain boundary sliding

    USGS Publications Warehouse

    Massey, M.A.; Prior, D.J.; Moecher, D.P.

    2011-01-01

    Optical microscopy, electron probe microanalysis, and electron backscatter diffraction methods have been used to examine a broad range of garnet microstructures within a high strain zone that marks the western margin of a major transpression zone in the southern New England Appalachians. Garnet accommodated variable states of finite strain, expressed as low strain porphyroclasts (Type 1), high strain polycrystalline aggregates (Type 2), and transitional morphologies (Type 3) that range between these end members. Type 1 behaved as rigid porphyroclasts and is characterized by four concentric Ca growth zones. Type 2 help define foliation and lineation, are characterized by three Ca zones, and possess a consistent bulk crystallographic preferred orientation of (100) symmetrical to the tectonic fabric. Type 3 show variable degrees of porphyroclast associated with aggregate, where porphyroclasts display complex compositional zoning that corresponds to lattice distortion, low-angle boundaries, and subgrains, and aggregate CPO mimics porphyroclast orientation. All aggregates accommodated a significant proportion of greenschist facies deformation through grain boundary sliding, grain rotation and impingement, and pressure solution, which lead to a cohesive behavior and overall strain hardening of the aggregates. The characteristic CPO could not have been developed in this manner, and was the result of an older phase of partitioned amphibolite facies dislocation creep, recovery including chemical segregation, and recrystallization of porphyroclasts. This study demonstrates the significance of strain accommodation within garnet and its affect on composition under a range of PT conditions, and emphasizes the importance of utilizing EBSD methods with studies that rely upon a sound understanding of garnet. ?? 2010 Elsevier Ltd.

  12. Lexical Cohesion and Specialized Knowledge in Science and Popular Science Texts.

    ERIC Educational Resources Information Center

    Myers, Greg

    1991-01-01

    Examines cohesion in the introductions to some scientific articles and compares the patterns to those from popularizations. Discusses a computational model of cohesion. Argues that readers of scientific articles must have a knowledge of lexical relations to see the implicit cohesion, whereas readers of popularizations must see the cohesive…

  13. Cohesion energetics of carbon allotropes: Quantum Monte Carlo study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shin, Hyeondeok; Kang, Sinabro; Koo, Jahyun

    2014-03-21

    We have performed quantum Monte Carlo calculations to study the cohesion energetics of carbon allotropes, including sp{sup 3}-bonded diamond, sp{sup 2}-bonded graphene, sp–sp{sup 2} hybridized graphynes, and sp-bonded carbyne. The computed cohesive energies of diamond and graphene are found to be in excellent agreement with the corresponding values determined experimentally for diamond and graphite, respectively, when the zero-point energies, along with the interlayer binding in the case of graphite, are included. We have also found that the cohesive energy of graphyne decreases systematically as the ratio of sp-bonded carbon atoms increases. The cohesive energy of γ-graphyne, the most energetically stablemore » graphyne, turns out to be 6.766(6) eV/atom, which is smaller than that of graphene by 0.698(12) eV/atom. Experimental difficulty in synthesizing graphynes could be explained by their significantly smaller cohesive energies. Finally, we conclude that the cohesive energy of a newly proposed graphyne can be accurately estimated with the carbon–carbon bond energies determined from the cohesive energies of graphene and three different graphynes considered here.« less

  14. [Effects of Korean proficiency and parent-child cohesion on self-esteem and acculturation among children from multicultural families].

    PubMed

    Kim, Mi Ye; Lim, Ji Young; Chung, Grace H

    2012-12-01

    There is evidence that parent-child cohesion is a potentially influential factor in children's self-esteem and acculturation. However, no research to date has examined cohesion with parents as a potential pathway between Korean proficiency and self-esteem or acculturation among children from multicultural families. This study was done to address these limitations by examining whether and to what extent cohesion with parents mediated the effect of Korean proficiency on self-esteem and acculturation among children from multicultural families. Data were collected from a sample of 138 mothers and their children living in Seoul, Daegu, Kyungi province, and Kyungpook province. Multiple regression analysis was used to examine the relationships between the variables of interest. Mediation effects of cohesion with parents were tested by following the procedure recommended by Baron and Kenny (1986). Cohesion with parents partially mediated the relationship between Korean proficiency and self-esteem. For children's acculturation, the effect of Korean proficiency was partially mediated through father-child cohesion. Mother-child cohesion completely mediated the relationship between Korean proficiency and acculturation. These findings suggest that to help children from multicultural families experiencing difficulties with self-esteem or acculturation, it might be useful to develop programs that are aimed at strengthen cohesion with parents.

  15. Happier together. Social cohesion and subjective well-being in Europe.

    PubMed

    Delhey, Jan; Dragolov, Georgi

    2016-06-01

    Despite mushrooming research on "social" determinants of subjective well-being (SWB), little is known as to whether social cohesion as a collective property is among the key societal conditions for human happiness. This article fills this gap in investigating the importance of living in a cohesive society for citizens' SWB. For 27 European Union countries, it combines the newly developed Bertelsmann Foundation's Cohesion Index with individual well-being data on life evaluation and psychological functioning as surveyed in the recent European Quality of Life Survey. The main results from multi-level analyses are as follows. First, Europeans are indeed happier and psychologically healthier in more cohesive societies. Second, all three core domains of cohesion increase individuals' SWB. Third, citizens in the more affluent part of Europe feel the positivity of social cohesion more consistently than those in the less affluent part. Finally, within countries, cohesion is good for the SWB of resource-rich and resource-poor groups alike. Our findings also shed new light on the ongoing debate on economic progress and quality of life: what makes citizenries of affluent societies happier is, in the first place, their capacity to create togetherness and solidarity among their members-in other words, cohesion. © 2015 International Union of Psychological Science.

  16. Neighborhood cohesion and daily well-being: Results from a diary study

    PubMed Central

    Robinette, Jennifer W.; Charles, Susan T.; Mogle, Jacqueline A.; Almeida, David M.

    2013-01-01

    Neighborly cohesiveness has documented benefits for health. Furthermore, high perceived neighborhood cohesion offsets the adverse health effects of neighborhood socioeconomic adversity. One potential way neighborhood cohesion influences health is through daily stress processes. The current study uses participants (n = 2022, age 30–84 years) from The Midlife in the United States II and the National Study of Daily Experiences II, collected between 2004–2006, to examine this hypothesis using a within-person, daily diary design. We predicted that people who perceive high neighborhood cohesion are exposed to fewer daily stressors, such as interpersonal arguments, lower daily physical symptoms and negative affect, and higher daily positive affect. We also hypothesized that perceptions of neighborhood cohesion buffer declines in affective and physical well-being on days when daily stressors do occur. Results indicate that higher perceived neighborhood cohesion predicts fewer self-reported daily stressors, higher positive affect, lower negative affect, and fewer physical health symptoms. High perceived neighborhood cohesion also buffers the effects of daily stressors on negative affect, even after adjusting for other sources of social support. Results from the present study suggest interventions focusing on neighborhood cohesion may result in improved well-being and may minimize the adverse effect of daily stressors. PMID:24034965

  17. Adhesion properties in systems of laminated pigmented polymers, carbon-graphite fiber composite framework and titanium surfaces in implant suprastructures.

    PubMed

    Segerström, Susanna; Ruyter, I Eystein

    2009-09-01

    For long-term stability the adhering interfaces of an implant-retained supraconstruction of titanium/carbon-graphite fiber-reinforced (CGFR) polymer/opaquer layer/denture base polymer/denture teeth must function as a unity. The aim was to evaluate adhesion of CGFR polymer to a titanium surface or CGFR polymer to two different opaquer layers/with two denture base polymers. Titanium plates were surface-treated and silanized and combined with a bolt of CGFR polymer or denture base polymer (Probase Hot). Heat-polymerized plates of CGFR polymer (47 wt% fiber) based on poly(methyl methacrylate) and a copolymer matrix were treated with an opaquer (Sinfony or Ropak) before a denture base polymer bolt was attached (Probase Hot or Lucitone 199). All specimens were heat-polymerized, water saturated (200 days) and thermally cycled (5000 cycles, 5/55 degrees C) before shear bond testing. Silicatized titanium surfaces gave higher bond strength to CGFR polymer (16.2+/-2.34 and 18.6+/-1.32) MPa and cohesive fracture than a sandblasted surface (5.9+/-2.11) MPa where the fracture was adhesive. The opaquer Sinfony gave higher adhesion values and mainly cohesive fractures than the opaquer Ropak. Different surface treatments (roughened or polished) of the CGFR polymer had no effect on bond strength. The fracture surfaces of silicatized titanium/CGFR polymer/opaquer layer (Sinfony)/denture base polymers were mainly cohesive. A combination of these materials in an implant-retained supraconstruction is promising for in vivo evaluation.

  18. Coach-initiated motivational climate and cohesion in youth sport.

    PubMed

    Eys, Mark A; Jewitt, Eryn; Evans, M Blair; Wolf, Svenja; Bruner, Mark W; Loughead, Todd M

    2013-09-01

    The general purpose of the present study was to examine the link between cohesion and motivational climate in youth sport. The first specific objective was to determine if relationships demonstrated in previous research with adult basketball and handball participants would be replicated in a younger sample and with a more heterogeneous set of sports. The second specific objective was to examine whether sources of athlete enjoyment moderate the relationships between motivational climate and cohesion. Athletes (N = 997; 532 girls and 465 boys; Mage = 15.26 +/- 1.20 years) completed measures pertaining to coach-initiated motivational climate, cohesion, and sources of enjoyment. Bivariate and canonical correlations revealed positive correlations between perceptions of a task-involving motivational climate and both task and social cohesion, while ego-involving motivational climate was negatively related. Cluster analyses suggested that individuals perceiving a low task-involving climate and high ego-involving climate perceived their teams as less cohesive. Finally, the degree to which participants derived enjoyment through other-referenced competency served as a moderator in the motivational climate-task cohesion relationship. Specifically, the relationship between task cohesion and motivational climate was more pronounced for those individuals who were less likely to derive enjoyment through other-referenced competency. Youth athletes' perceptions of coach-initiated motivational climate are related to cohesion. This relationship is, however, moderated by the degree to which athletes derive enjoyment through other-referenced competency. Motivational climate is an important variable to consider within team-building protocols intent on developing cohesion.

  19. Relationship between the cohesion of guest particles on the flow behaviour of interactive mixtures.

    PubMed

    Mangal, Sharad; Gengenbach, Thomas; Millington-Smith, Doug; Armstrong, Brian; Morton, David A V; Larson, Ian

    2016-05-01

    In this study, we aimed to investigate the effects cohesion of small surface-engineered guest binder particles on the flow behaviour of interactive mixtures. Polyvinylpyrrolidone (PVP) - a model pharmaceutical binder - was spray-dried with varying l-leucine feed concentrations to create small surface-engineered binder particles with varying cohesion. These spray-dried formulations were characterised by their particle size distribution, morphology and cohesion. Interactive mixtures were produced by blending these spray-dried formulations with paracetamol. The resultant blends were visualised under scanning electron microscope to confirm formation of interactive mixtures. Surface coverage of paracetamol by guest particles as well as the flow behaviour of these mixtures were examined. The flow performance of interactive mixtures was evaluated using measurements of conditioned bulk density, basic flowability energy, aeration energy and compressibility. With higher feed l-leucine concentrations, the surface roughness of small binder particles increased, while their cohesion decreased. Visual inspection of the SEM images of the blends indicated that the guest particles adhered to the surface of paracetamol resulting in effective formation of interactive mixtures. These images also showed that the low-cohesion guest particles were better de-agglomerated that consequently formed a more homogeneous interactive mixture with paracetamol compared with high-cohesion formulations. The flow performance of interactive mixtures changed as a function of the cohesion of the guest particles. Interactive mixtures with low-cohesion guest binder particles showed notably improved bulk flow performance compared with those containing high-cohesion guest binder particles. Thus, our study suggests that the cohesion of guest particles dictates the flow performance of interactive mixtures. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

  20. THE RELATIONSHIP BETWEEN SOCIAL, POLICY AND PHYSICAL VENUE FEATURES AND SOCIAL COHESION ON CONDOM USE FOR PREGNANCY PREVENTION AMONG SEX WORKERS: A SAFER INDOOR WORK ENVIRONMENT SCALE

    PubMed Central

    Duff, Putu; Shoveller, Jean; Dobrer, Sabina; Ogilvie, Gina; Montaner, Julio; Chettiar, Jill; Shannon, Kate

    2015-01-01

    Background This study aims to: report on a newly developed ‘Safer Indoor Work Environmental Scale’ that characterizes the social, policy and physical features of indoor venues and social cohesion; and using this scale, longitudinally evaluate the association between these features on sex workers’ (SWs’) condom use for pregnancy prevention. Methods Drawing on a prospective open cohort of female SWs working in indoor venues, a newly-developed ‘Safer Indoor Work Environment Scale’ was used to build six multivariable models with generalized estimating equations (GEE), to determine the independent effects of social, policy and venue-based features and social cohesion on condom use. Results Of 588 indoor SWs, 63.6% used condoms for pregnancy prevention in the last month. In multivariable GEE analysis, the following venue-based features were significantly correlated with barrier contraceptive use for pregnancy prevention: managerial practices and venue safety policies (Adjusted Odds Ratio (AOR)=1.09; 95% Confidence Interval (95%CI) 1.01–1.17) access to sexual and reproductive health services/supplies (AOR=1.10; 95%CI 1.00–1.20) access to drug harm reduction (AOR=1.13; 95%CI 1.01–1.28), and social cohesion among workers (AOR=1.05; 95%CI 1.03–1.07). Access to security features was marginally associated with condom use (AOR=1.13; 95%CI 0.99–1.29). Conclusion The findings of the current study highlight how work environment and social cohesion among SWs are related to improved condom use. Given global calls for the decriminalization of sex work, and potential legislative reforms in Canada, this study points to the critical need for new institutional arrangements (e.g., legal and regulatory frameworks; labour standards) to support safer sex workplaces. PMID:25678713

  1. The socio-matrix reloaded: from hierarchy to dominance profile in wild lemurs.

    PubMed

    Norscia, Ivan; Palagi, Elisabetta

    2015-01-01

    Dominance hierarchy influences the life quality of social animals, and its definition should in principle be based on the outcome of agonistic interactions. However, defining and comparing the dominance profile of social groups is difficult due to the different dominance measures used and because no one measure explains it all. We applied different analytical methods to winner-loser sociomatrices to determine the dominance profile of five groups of wild lemurs (species: Lemur catta, Propithecus verreauxi, and Eulemur rufus x collaris) from the Berenty forest (Madagascar). They are an excellent study model because they share the same habitat and an apparently similar dominance profile: linear hierarchy and female dominance. Data were collected over more than 1200 h of observation. Our approach included four steps: (1) by applying the binary dyadic dominance relationship method (I&SI) on either aggressions or supplant sociomatrices we verified whether hierarchy was aggression or submission based; (2) by calculating normalized David's scores and measuring steepness from aggression sociomatrices we evaluated whether hierarchy was shallow or steep; (3) by comparing the ranking orders obtained with methods 1 and 2 we assessed whether hierarchy was consistent or not; and (4) by assessing triangle transitivity and comparing it with the linearity index and the level of group cohesion we determined if hierarchy was more or less cohesive. Our results show that L. catta groups have got a steep, consistent, highly transitive and cohesive hierarchy. P. verreauxi groups are characterized by a moderately steep and consistent hierarchy, with variable levels of triangle transitivity and cohesion. E. rufus x collaris group possesses a shallow and inconsistent hierarchy, with lower (but not lowest) levels of transitivity and cohesion. A multiple analytical approach on winner-loser sociomatrices other than leading to an in-depth description of the dominance profile, allows intergroup and cross-species comparisons.

  2. The socio-matrix reloaded: from hierarchy to dominance profile in wild lemurs

    PubMed Central

    Norscia, Ivan

    2015-01-01

    Dominance hierarchy influences the life quality of social animals, and its definition should in principle be based on the outcome of agonistic interactions. However, defining and comparing the dominance profile of social groups is difficult due to the different dominance measures used and because no one measure explains it all. We applied different analytical methods to winner-loser sociomatrices to determine the dominance profile of five groups of wild lemurs (species: Lemur catta, Propithecus verreauxi, and Eulemur rufus x collaris) from the Berenty forest (Madagascar). They are an excellent study model because they share the same habitat and an apparently similar dominance profile: linear hierarchy and female dominance. Data were collected over more than 1200 h of observation. Our approach included four steps: (1) by applying the binary dyadic dominance relationship method (I&SI) on either aggressions or supplant sociomatrices we verified whether hierarchy was aggression or submission based; (2) by calculating normalized David’s scores and measuring steepness from aggression sociomatrices we evaluated whether hierarchy was shallow or steep; (3) by comparing the ranking orders obtained with methods 1 and 2 we assessed whether hierarchy was consistent or not; and (4) by assessing triangle transitivity and comparing it with the linearity index and the level of group cohesion we determined if hierarchy was more or less cohesive. Our results show that L. catta groups have got a steep, consistent, highly transitive and cohesive hierarchy. P. verreauxi groups are characterized by a moderately steep and consistent hierarchy, with variable levels of triangle transitivity and cohesion. E. rufus x collaris group possesses a shallow and inconsistent hierarchy, with lower (but not lowest) levels of transitivity and cohesion. A multiple analytical approach on winner-loser sociomatrices other than leading to an in-depth description of the dominance profile, allows intergroup and cross-species comparisons. PMID:25653908

  3. What Determines CO₂ Solubility in Ionic Liquids? A Molecular Simulation Study.

    PubMed

    Klähn, Marco; Seduraman, Abirami

    2015-08-06

    Molecular dynamics (MD) simulations of 10 different pure and CO2-saturated ionic liquids are performed to identify the factors that determine CO2 solubility. Imidazolium-based cations with varying alkyl chain length and functionalization are paired with anions of different hydrophobicity and size. Simulations are carried out with an empirical force field based on liquid-phase charges. The partial molar volume of CO2 in ionic liquids (ILs) varies from 30 to 40 cm(3)/mol. This indicates that slight ion displacements are necessary to enable CO2 insertions. However, the absorption of CO2 does not affect the overall organization of ions in the ILs as demonstrated by almost equal cation-anion radial distribution functions of pure ILs and ILs saturated with CO2. The solubility of CO2 in ILs is not influenced by direct CO2-ion interactions. Instead, a strong correlation between the ratio of unoccupied space in pure ILs and their ability to absorb CO2 is found. This preformed unoccupied space is regularly dispersed throughout the ILs and needs to be expanded by slight ion displacements to accommodate CO2. The amount of preformed unoccupied space is a good indicator for ion cohesion in ILs. Weak electrostatic cation-anion interaction densities in ILs, i.e., weak ion cohesion, leads to larger average distances between ions and hence to more unoccupied space. Weak ion cohesion facilitates ion displacement to enable an expansion of empty space to accommodate CO2. Moreover, it is demonstrated that the strength of ion cohesion is primarily determined by the ion density, which in turn is given by the ion sizes. Ion cohesion is influenced additionally to a smaller extent by local electrostatic interactions among ion moieties between which CO2 is inserted and which do not depend on the ion density. Overall, the factors that determine the solubility of CO2 in ILs are identified consistently across a large variety of constituting ions through MD simulations.

  4. The relationship between social, policy and physical venue features and social cohesion on condom use for pregnancy prevention among sex workers: a safer indoor work environment scale.

    PubMed

    Duff, Putu; Shoveller, Jean; Dobrer, Sabina; Ogilvie, Gina; Montaner, Julio; Chettiar, Jill; Shannon, Kate

    2015-07-01

    This study aims to report on a newly developed Safer Indoor Work Environmental Scale that characterises the social, policy and physical features of indoor venues and social cohesion; and using this scale, longitudinally evaluate the association between these features on sex workers' (SWs') condom use for pregnancy prevention. Drawing on a prospective open cohort of female SWs working in indoor venues, a newly developed Safer Indoor Work Environment Scale was used to build six multivariable models with generalised estimating equations (GEE), to determine the independent effects of social, policy and physical venue-based features and social cohesion on condom use. Of 588 indoor SWs, 63.6% used condoms for pregnancy prevention in the last month. In multivariable GEE analysis, the following venue-based features were significantly correlated with barrier contraceptive use for pregnancy prevention: managerial practices and venue safety policies (adjusted OR (AOR)=1.09; 95% CI 1.01 to 1.17), access to sexual and reproductive health services/supplies (AOR=1.10; 95% CI 1.00 to 1.20), access to drug harm reduction (AOR=1.13; 95% CI 1.01 to 1.28) and social cohesion among workers (AOR=1.05; 95% CI 1.03 to 1.07). Access to security features was marginally associated with condom use (AOR=1.13; 95% CI 0.99 to 1.29). The findings of the current study highlight how work environment and social cohesion among SWs are related to improved condom use. Given global calls for the decriminalisation of sex work, and potential legislative reforms in Canada, this study points to the critical need for new institutional arrangements (eg, legal and regulatory frameworks; labour standards) to support safer sex workplaces. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  5. Cohesive Laws and Progressive Damage Analysis of Composite Bonded Joints, a Combined Numerical/Experimental Approach

    NASA Technical Reports Server (NTRS)

    Girolamo, Donato; Davila, Carlos G.; Leone, Frank A.; Lin, Shih-Yung

    2015-01-01

    The results of an experimental/numerical campaign aimed to develop progressive damage analysis (PDA) tools for predicting the strength of a composite bonded joint under tensile loads are presented. The PDA is based on continuum damage mechanics (CDM) to account for intralaminar damage, and cohesive laws to account for interlaminar and adhesive damage. The adhesive response is characterized using standard fracture specimens and digital image correlation (DIC). The displacement fields measured by DIC are used to calculate the J-integrals, from which the associated cohesive laws of the structural adhesive can be derived. A finite element model of a sandwich conventional splice joint (CSJ) under tensile loads was developed. The simulations, in agreement with experimental tests, indicate that the model is capable of predicting the interactions of damage modes that lead to the failure of the joint.

  6. Prediction the concentration of graphite direct exfoliation by liquid solution with solubility parameters map

    NASA Astrophysics Data System (ADS)

    Liang, Ko-Yuan; Yang, Wein-Duo

    2018-01-01

    This study is to discuss solvent selection with graphene dispersion concentration of directly exfoliation graphite. That limiting boundaries of fractional cohesion parameters will be draw on the triangular diagram to prediction and estimate. It is based on the literature of data and check with experimental or other literature results, include organic solution, aqueous solution and ionic liquid. In this work, we found that estimated the graphene dispersion concentration by distance (Ra) of Hansen solubility parameters (HSP) between graphene and solvent, the lower Ra; the higher concentration, some case the lower Ra; the lower dispersion concentration (such as acetone). It is compatible with the graphene dispersion concentration on the Hansen space or Triangular fractional cohesion parameters dispersion diagram. From Triangular fractional cohesion parameters dispersion diagram, 2D maps are more convenient for researchers than 3D maps of Hansen space and quickly to find the appropriate combination of solvents for different application.

  7. Contrasting faith-based and traditional substance abuse treatment programs.

    PubMed

    Neff, James Alan; Shorkey, Clayton T; Windsor, Liliane Cambraia

    2006-01-01

    This article (a) discusses the definition of faith-based substance abuse treatment programs, (b) juxtaposes Durkheim's theory regarding religion with treatment process model to highlight key dimensions of faith-based and traditional programs, and (c) presents results from a study of seven programs to identify key program dimensions and to identify differences/similarities between program types. Focus group/Concept Mapping techniques yielded a clear "spiritual activities, beliefs, and rituals" dimension, rated as significantly more important to faith-based programs. Faith-based program staff also rated "structure and discipline" as more important and "work readiness" as less important. No differences were found for "group activities/cohesion" and "role modeling/mentoring," "safe, supportive environment," and "traditional treatment modalities." Programs showed substantial similarities with regard to core social processes of treatment such as mentoring, role modeling, and social cohesion. Implications are considered for further research on treatment engagement, retention, and other outcomes.

  8. Bedform development in mixed sand-mud: The contrasting role of cohesive forces in flow and bed

    NASA Astrophysics Data System (ADS)

    Baas, Jaco H.; Davies, Alan G.; Malarkey, Jonathan

    2013-01-01

    The majority of subaqueous sediment on Earth consists of mixtures of cohesive clay and cohesionless sand and silt, but the role of cohesion on the development and stability of sedimentary bedforms is poorly understood. The results of new laboratory flume experiments on bedform development in cohesive, mixed sand-mud beds are compared with the results of previous experiments in which cohesive forces in high concentration clay flows dominated bedform development. Even though both series of mixed sand-mud experiments were conducted at similar flow velocities, the textural and structural properties of the bedforms were sufficiently different to permit the designation of key criteria for identifying bedform generation under cohesive flows against bedform generation on cohesive substrates. These criteria are essential for improving bedform size predictions in sediment transport modelling in modern sedimentary environments and for the reconstruction of depositional processes in the geological record. The current ripples developing on the cohesive, mixed sand-mud beds, with bed mud fractions of up to 18%, were significantly smaller than equivalent bedforms in noncohesive sand. Moreover, the bedform height showed a stronger inversely proportional relationship with initial bed mud fraction than the bedform wavelength. This is in contrast with the bedforms developing under the cohesive clay flows, which tend to increase in size with increasing suspended clay concentration until the flow turbulence is fully suppressed. Selective removal of clay from the mixed beds, i.e., clay winnowing, was found to be an important process, with 82-100% clay entrained into suspension after 2 h of bedform development. This winnowing process led to the development of a sand-rich armouring layer. This armouring layer is inferred to have protected the underlying mixed sand-mud from prolonged erosion, and in conjunction with strong cohesive forces in the bed may have caused the smaller size of the bedforms. Winnowing was less efficient for the bedforms developing under the cohesive clay flows, where bedforms consisting of muddy sand were more characteristic. The winnowed sand was also found to heal irregularly scoured topography, thus reestablishing classic quasitriangular bedform shapes. In cohesive flows, the bedforms had more variable shapes, and the healing process was confined to lower transitional plug flows in which strong turbulence is only present close to the sediment bed. Furthermore, the bedforms on the cohesive beds tended to form angle-of-repose cross lamination, whereas low angle cross lamination was more common in bedforms under cohesive flows. In general terms, erosional bedforms prevail when cohesive forces in the bed dominate bedform dynamics, whereas depositional bedforms prevail when cohesive forces in the flow dominate bedform dynamics. Empirical relationships between the proportion of cohesive mud in the mixed sand-mud bed and the development rate and size of the bedforms are defined for future use in field and laboratory studies.

  9. Social Cohesion as a Real-Life Phenomenon: Assessing the Explanatory Power of the Universalist and Particularist Perspectives

    ERIC Educational Resources Information Center

    Janmaat, Jan Germen

    2011-01-01

    Unlike most studies on social cohesion, this study explores the concept as a real-life macro-level phenomenon. It assesses to what extent the conceptions of social cohesion suggested by several macro-level approaches represent coherent empirically observable forms of social cohesion. Additionally it discusses two perspectives on social…

  10. A Numerical/Experimental Study on the Impact and CAI Behaviour of Glass Reinforced Compsite Plates

    NASA Astrophysics Data System (ADS)

    Perillo, Giovanni; Jørgensen, Jens K.; Cristiano, Roberta; Riccio, Aniello

    2018-04-01

    This paper focuses on the development of an advance numerical model specifically for simulating low velocity impact events and related stiffness reduction on composite structures. The model is suitable for low cost thick composite structures like wind turbine blade and maritime vessels. The model consist of a combination of inter and intra laminar models. The intra-laminar model present a combination of Puck and Hashin failure theories for the evaluation of the fibre and matrix failure. The inter-laminar damage is instead simulated by Cohesive Zone Method based on energy approach. Basic material properties, easily measurable according to standardized tests, are required. The model has been used to simulate impact and compression after impact tests. Experimental tests have been carried out on thick E-Glass/Epoxy composite commonly used in the wind turbine industry. The clustering effect as well as the consequence of the impact energy have been experimentally tested. The accuracy of numerical model has been verified against experimental data showing a very good accuracy of the model.

  11. Dripping and evolution behavior of primary slag bearing TiO2 through the coke packed bed in a blast-furnace hearth

    NASA Astrophysics Data System (ADS)

    Liu, Yan-xiang; Zhang, Jian-liang; Wang, Zhi-yu; Jiao, Ke-xin; Zhang, Guo-hua; Chou, Kuo-chih

    2017-02-01

    To investigate the flow of primary slag bearing TiO2 in the cohesive zone of blast furnaces, experiments were carried out based on the laboratory-scale packed bed systems. It is concluded that the initial temperature of slag dripping increases with decreasing FeO content and increasing TiO2 content. The slag holdup decreases when the FeO content is in the range of 5wt%-10wt%, whereas it increases when the FeO content exceeds 10wt%. Meanwhile, the slag holdup decreases when the TiO2 content increases from 5wt% to 10wt% but increases when the TiO2 content exceeds 10wt%. Moreover, slag/coke interface analysis shows that the reaction between FeO and TiO2 occurs between the slag and the coke. The slag/coke interface is divided into three layers: slag layer, iron-rich layer, and coke layer. TiO2 in the slag is reduced by carbon, and the generated Ti diffuses into iron.

  12. Family cohesion and pride, drinking and alcohol use disorder in Puerto Rico.

    PubMed

    Caetano, Raul; Vaeth, Patrice A C; Canino, Glorisa

    2017-01-01

    The extended multigenerational family is a core value of Hispanic culture. Family cohesion/pride can have protective effects on drinking- and drug-use-related behavior among Hispanics. To examine the association between family cohesion/pride, drinking, binge drinking, and DSM-5 alcohol use disorder (AUD) in Puerto Rico. Data are from a household random sample of 1510 individuals 18-64 years of age in San Juan, Puerto Rico. Bivariate analyses showed that family cohesion/pride was not associated with the average number of drinks consumed per week but was associated with binge drinking among men. Family cohesion/pride was also associated with DSM-5 AUD. Results of the multivariate analyses were consistent with these bivariate results for DSM-5 AUD. Respondents with low (OR = 2.2, 95CL = 1.21-3.98; p < .01) and medium (OR = 1.88; 95CL = 1.12-3.14; p < .01) family cohesion/pride were more likely than those with high family cohesion/pride to have a positive diagnosis of DSM-5 AUD. More liberal drinking norms and positive attitudes toward drinking were also strong predictors of the average number of drinks consumed per week. More liberal drinking norms also predicted binge drinking, and DSM-5 AUD. Higher family cohesion/pride may have a protective effect against DSM-5 AUD. This may have practical implications for clinical and prevention programs. As long as high cohesion is not enabling drinking, these programs can enhance and support family cohesion/pride to help clients in treatment and recovery and prevent drinking problems.

  13. Family Cohesion and Pride: Drinking and Alcohol Use Disorders in Puerto Rico

    PubMed Central

    Caetano, Raul; Vaeth, Patrice A. C.; Canino, Glorisa

    2017-01-01

    Background The extended multigenerational family is a core value of Hispanic culture. Family cohesion/pride can have protective effects on drinking and drug use related behavior among Hispanics. Objectives To examine the association between family cohesion/pride, drinking, binge drinking, and DSM-5 alcohol use disorder in Puerto Rico. Methods Data are from a household random sample of 1510 individuals 18-64 years of age of San Juan, Puerto Rico. Results Bivariate analyses showed that family cohesion/pride was not associated with the average number of drinks consumed per week, but was associated with binge drinking among men. Family cohesion/pride was also associated with DSM-5 alcohol use disorder. Results of the multivariate analyses were consistent with these bivariate results for DSM-5 AUD. Respondents with low (OR=2.2, 95CL=1.21-3.98; p<.01) and medium (OR=1.88; 95CL=1.12-3.14; p<.01) family cohesion/pride were more likely than those with high family cohesion/pride to have a positive diagnosis of DSM-5 alcohol use disorder. More liberal drinking norms and positive attitudes towards drinking were also strong predictors of the average number of drinks consumed per week. More liberal drinking norms also predicted binge drinking, and DSM-5 AUD. Conclusions Higher family cohesion/pride may have a protective effect against DSM-5 alcohol use disorder. This may have practical implications for clinical and prevention programs. As long as high cohesion is not enabling drinking, these programs can enhance and support family cohesion/pride to help clients in treatment and recovery and prevent drinking problems. PMID:27808561

  14. Neighborhood Social Cohesion as a Mediator of Neighborhood Conditions on Mothers' Engagement in Physical Activity: Results From the Geographic Research on Wellbeing Study.

    PubMed

    Yuma-Guerrero, Paula J; Cubbin, Catherine; von Sternberg, Kirk

    2017-12-01

    The purpose of this study was to determine if social cohesion mediates the effects of neighborhood and household-level socioeconomic status (SES), perceptions of neighborhood safety, and access to parks on mothers' engagement in physical activity (PA). Secondary analyses were conducted on cross-sectional data from The Geographic Research on Wellbeing (GROW) study. GROW includes survey data from a diverse sample of 2,750 California mothers. Structural equation modeling was used to test a conceptual multilevel mediation model, proposing social cohesion as a mediator of known predictors of PA. Social cohesion fully mediated the pathway from perceived neighborhood safety to mothers' PA. Social cohesion also mediated the significant relationship between neighborhood SES and PA; however, this mediation finding was not practically significant when considered in the context of the full model. Household SES was significantly positively related to both social cohesion and PA. Park access contributed significantly to social cohesion but not directly to PA Social cohesion did not significantly mediate relationships between park access or household SES and PA. There is a need for public health interventions to improve engagement in PA among individuals and neighborhoods with lower levels of socioeconomic resources. Interventions that create social cohesion within neighborhoods may have positive effects on mothers' PA, particularly in neighborhoods perceived as unsafe.

  15. Contributions of Self-Explanation to Comprehension of High- and Low-Cohesion Texts

    ERIC Educational Resources Information Center

    Ozuru, Yasuhiro; Briner, Stephen; Best, Rachel; McNamara, Danielle S.

    2010-01-01

    This study examined how the contribution of self-explanation to science text comprehension is affected by the cohesion of a text at a local level. Psychology undergraduates read and self-explained a science text with either low or high local cohesion. Local cohesion was manipulated by the presence or absence of connectives and referential words or…

  16. Revealing the Hidden Relationship by Sparse Modules in Complex Networks with a Large-Scale Analysis

    PubMed Central

    Jiao, Qing-Ju; Huang, Yan; Liu, Wei; Wang, Xiao-Fan; Chen, Xiao-Shuang; Shen, Hong-Bin

    2013-01-01

    One of the remarkable features of networks is module that can provide useful insights into not only network organizations but also functional behaviors between their components. Comprehensive efforts have been devoted to investigating cohesive modules in the past decade. However, it is still not clear whether there are important structural characteristics of the nodes that do not belong to any cohesive module. In order to answer this question, we performed a large-scale analysis on 25 complex networks with different types and scales using our recently developed BTS (bintree seeking) algorithm, which is able to detect both cohesive and sparse modules in the network. Our results reveal that the sparse modules composed by the cohesively isolated nodes widely co-exist with the cohesive modules. Detailed analysis shows that both types of modules provide better characterization for the division of a network into functional units than merely cohesive modules, because the sparse modules possibly re-organize the nodes in the so-called cohesive modules, which lack obvious modular significance, into meaningful groups. Compared with cohesive modules, the sizes of sparse ones are generally smaller. Sparse modules are also found to have preferences in social and biological networks than others. PMID:23762457

  17. [Effects of family cohesion and adaptability on behavioral problems in preschool children].

    PubMed

    Wang, Yan-Ni; Xue, Hong-Li; Chen, Qian

    2016-05-01

    To investigate the effects of family cohesion and adaptability on behavioral problems in preschool children. The stratified cluster multistage sampling method was used to perform a questionnaire survey in the parents of 1 284 children aged 3-6 years in the urban area of Lanzhou, China. The general status questionnaire, Conners Child Behavior Checklist (Parent Symptom Question), and Family Adaptability and Cohesion Scale, Second edition, Chinese version (FACESII-CV) were used to investigate behavioral problems and family cohesion and adaptability. The overall detection rate of behavioral problems in preschool children was 17.13%. The children with different types of family cohesion had different detection rates of behavioral problems, and those with free-type family cohesion showed the highest detection rate of behavioral problems (40.2%). The children with different types of family adaptability also had different detection rates of behavioral problems, and those with stiffness type showed the highest detection rate of behavioral problems (25.1%). The behavioral problems in preschool children were negatively correlated with family cohesion and adaptability. During the growth of preschool children, family cohesion and adaptability have certain effects on the mental development of preschool children.

  18. Negative emotional reactivity moderates the relations between family cohesion and internalizing and externalizing symptoms in adolescence✩

    PubMed Central

    Rabinowitz, Jill A.; Osigwe, Ijeoma; Drabick, Deborah A.G.; Reynolds, Maureen D.

    2016-01-01

    Lower family cohesion is associated with adolescent internalizing and externalizing problems. However, there are likely individual differences in youth's responses to family processes. For example, adolescents higher in negative emotional reactivity, who often exhibit elevated physiological responsivity to context, may be differentially affected by family cohesion. We explored whether youth's negative emotional reactivity moderated the relation between family cohesion and youth's symptoms and tested whether findings were consistent with the diathesis-stress model or differential susceptibility hypothesis. Participants were 651 adolescents (M = 12.99 ± .95 years old; 72% male) assessed at two time points (Time 1, ages 12–14; Time 2, age 16) in Pittsburgh, PA. At Time 1, mothers reported on family cohesion and youth reported on their negative emotional reactivity. At Time 2, youth reported on their symptoms. Among youth higher in negative emotional reactivity, lower family cohesion predicted higher symptoms than higher family cohesion, consistent with the diathesis-stress model. PMID:27718379

  19. The relation between social cohesion and smoking cessation among Black smokers, and the potential role of psychosocial mediators.

    PubMed

    Reitzel, Lorraine R; Kendzor, Darla E; Castro, Yessenia; Cao, Yumei; Businelle, Micheal S; Mazas, Carlos A; Cofta-Woerpel, Ludmila; Li, Yisheng; Cinciripini, Paul M; Ahluwalia, Jasjit S; Wetter, David W

    2013-04-01

    Social cohesion, the self-reported trust and connectedness between neighbors, may affect health behaviors via psychosocial mechanisms. Relations between individual perceptions of social cohesion and smoking cessation were examined among 397 Black treatment-seeking smokers. Continuation ratio logit models examined the relation of social cohesion and biochemically verified continuous smoking abstinence through 6 months post-quit. Indirect effects were examined in single mediator models using a nonparametric bootstrapping procedure. All analyses controlled for sociodemographics, tobacco dependence, and treatment. The total effect of social cohesion on continuous abstinence was non-significant (β = 0.05, p = 0.10). However, social cohesion was associated with social support, positive affect, negative affect, and stress, which, in turn, were each associated with abstinence in adjusted models (ps < 0.05). Results suggest that social cohesion may facilitate smoking cessation among Black smokers through desirable effects on psychosocial mechanisms that can result from living in a community with strong interpersonal connections.

  20. The Relation between Social Cohesion and Smoking Cessation among Black Smokers, and the Potential Role of Psychosocial Mediators

    PubMed Central

    Reitzel, Lorraine R.; Kendzor, Darla E.; Castro, Yessenia; Cao, Yumei; Businelle, Micheal S.; Mazas, Carlos A.; Cofta-Woerpel, Ludmila; Li, Yisheng; Cinciripini, Paul M.; Ahluwalia, Jasjit S.; Wetter, David W.

    2012-01-01

    Background Social cohesion, the self-reported trust and connectedness between neighbors, may affect health behaviors via psychosocial mechanisms. Purpose Relations between individual perceptions of social cohesion and smoking cessation were examined among 397 Black treatment-seeking smokers. Methods Continuation ratio logit models examined the relation of social cohesion and biochemically-verified continuous smoking abstinence through 6 months post-quit. Indirect effects were examined in single mediator models using a nonparametric bootstrapping procedure. All analyses controlled for sociodemographics, tobacco dependence, and treatment. Results The total effect of social cohesion on continuous abstinence was non-significant (β=.05, p=.10). However, social cohesion was associated with social support, positive affect negative affect, and stress, which, in turn, were each associated with abstinence in adjusted models (ps<.05). Conclusions Results suggest that social cohesion may facilitate smoking cessation among Black smokers through desirable effects on psychosocial mechanisms that can result from living in a community with strong interpersonal connections. PMID:23135831

  1. Sex differences in the development of perceived family cohesion and depressive symptoms in Taiwanese adolescents.

    PubMed

    Sze, Tat-Ming; Hsieh, Pei-Jung; Lin, Sieh-Hwa; Chen, I-Jung

    2013-08-01

    This study investigates the progression of family cohesion perceptions and depressive symptoms during the character development stage in adolescents. Data were used from the Taiwan Youth Project. The final sample comprised 2,690 adolescents with 1,312 girls (48.8%; M age = 13.0 yr., SD = 0.5). Latent curve growth analysis was employed to explore these developments. Seventh-grade girls reported greater family cohesion and more depressive symptoms than boys, and boys reported greater growth in family cohesion than girls. However, progression of depressive symptoms was not associated with the child's sex. Higher perceived family cohesion in Grade 7 correlated with less increase of depressive symptoms from Grades 9 to 11. The long-term positive influence of family cohesion on depressive symptoms is discussed.

  2. Social Capital as a Determinant of Self-Rated Health in Women of Reproductive Age: A Population-Based Study.

    PubMed

    Baheiraei, Azam; Bakouei, Fatemeh; Bakouei, Sareh; Eskandari, Narges; Ahmari Tehran, Hoda

    2015-07-19

    Recognition of the factors related to women's health is necessary. Evidence is available that the social structure including social capital plays an important role in the shaping people's health. The aim of the current study was to investigate the association between self-rated health and social capital in women of reproductive age. This study is a population-based cross-sectional survey on 770 women of reproductive age, residing in any one of the 22 municipality areas across Tehran (capital of Iran) with the multi stage sampling technique. Self-rated health (Dependent variable), social capital (Independent variable) and covariates were studied. Analysis of data was done by one-way ANOVA test and multiple linear regressions. Depending on logistic regression analyses, the significant associations were found between self-rated health and age, educational level, crowding index, sufficiency of income for expenses and social cohesion. Data show that women with higher score in social cohesion as an outcome dimension of social capital have better self-rated health (PV = 0.001). Given the findings of this study, the dimensions of social capital manifestations (groups and networks, trust and solidarity, collective action and cooperation) can potentially lead to the dimensions of social capital outcomes (social cohesion and inclusion, and empowerment and political action). Following that, social cohesion as a dimension of social capital outcomes has positively relationship with self- rated health after controlling covariates. Therefore, it is required to focus on the social capital role on health promotion and health policies.

  3. Residential road traffic noise and general mental health in youth: The role of noise annoyance, neighborhood restorative quality, physical activity, and social cohesion as potential mediators.

    PubMed

    Dzhambov, Angel; Tilov, Boris; Markevych, Iana; Dimitrova, Donka

    2017-12-01

    Given the ubiquitous nature of both noise pollution and mental disorders, their alleged association has not escaped the spotlight of public health research. The effect of traffic noise on mental health is probably mediated by other factors, which have not been elucidated sufficiently. Herein, we aimed to disentangle the pathways linking road traffic noise to general mental health in Bulgarian youth, with a focus on several candidate mediators - noise annoyance, perceived restorative quality of the living environment, physical activity, and neighborhood social cohesion. A cross-sectional sample was collected in October - December 2016 in the city of Plovdiv, Bulgaria. It consisted of 399 students aged 15-25years, recruited from two high schools and three universities. Road traffic noise exposure (L den ) was derived from the strategic noise map of Plovdiv. Mental health was measured with the 12-item form of the General Health Questionnaire (GHQ-12). Noise annoyance, perceived restorative quality of the living environment, commuting and leisure time physical activity, and neighborhood social cohesion were assessed using validated questionnaires. Analyses were based on linear regression mediation models and a structural equation modeling (SEM) to account for the hypothesized interdependencies between candidate mediators. Results showed that higher noise exposure was associated with worse mental health only indirectly. More specifically, tests of the single and parallel mediation models indicated independent indirect paths through noise annoyance, social cohesion, and physical activity. In addition, the SEM revealed that more noise annoyance was associated with less social cohesion, and in turn with worse mental health; noise annoyance was also associated with lower neighborhood restorative quality, thereby with less social cohesion and physical activity, and in turn with worse mental health. However, causality could not be established. Further research is warranted to expand our still limited understanding of these person-environment interactions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Impact of a Generalizable Reminder System on Colorectal Cancer Screening in Diverse Primary Care Practices

    PubMed Central

    Nease, Donald E.; Ruffin, Mack T.; Klinkman, Michael S.; Jimbo, Masahito; Braun, Thomas M.; Underwood, Jennifer M.

    2015-01-01

    Background Computerized reminder systems (CRS) show promise for increasing preventive services such as colorectal cancer (CRC) screening. However, prior research has not evaluated a generalizable CRS across diverse, community primary care practices. We evaluated whether a generalizable CRS, ClinfoTracker, could improve screening rates for CRC in diverse primary care practices. Methods The study was a prospective trial to evaluate ClinfoTracker using historical control data in 12 Great Lakes Research In Practice Network community-based, primary care practices distributed from Southeast to Upper Peninsula Michigan. Our outcome measures were pre- and post-study practice-level CRC screening rates among patients seen during the 9-month study period. Ability to maintain the CRS was measured by days of reminder printing. Field notes were used to examine each practice’s cohesion and technology capabilities. Results All but one practice increased their CRC screening rates, ranging from 3.3% to 16.8% improvement. t tests adjusted for within practice correlation showed improvement in screening rates across all 12 practices, from 41.7% to 50.9%, P = 0.002. Technology capabilities impacted printing days (74% for high technology vs. 45% for low technology practices, P = 0.01), and cohesion demonstrated an impact trend for screening (15.3% rate change for high cohesion vs. 7.9% for low cohesion practices). Conclusions Implementing a generalizable CRS in diverse primary care practices yielded significant improvements in CRC screening rates. Technology capabilities are important in maintaining the system, but practice cohesion may have a greater influence on screening rates. This work has important implications for practices implementing reminder systems. PMID:18725836

  5. Tissue cohesion and the mechanics of cell rearrangement.

    PubMed

    David, Robert; Luu, Olivia; Damm, Erich W; Wen, Jason W H; Nagel, Martina; Winklbauer, Rudolf

    2014-10-01

    Morphogenetic processes often involve the rapid rearrangement of cells held together by mutual adhesion. The dynamic nature of this adhesion endows tissues with liquid-like properties, such that large-scale shape changes appear as tissue flows. Generally, the resistance to flow (tissue viscosity) is expected to depend on the cohesion of a tissue (how strongly its cells adhere to each other), but the exact relationship between these parameters is not known. Here, we analyse the link between cohesion and viscosity to uncover basic mechanical principles of cell rearrangement. We show that for vertebrate and invertebrate tissues, viscosity varies in proportion to cohesion over a 200-fold range of values. We demonstrate that this proportionality is predicted by a cell-based model of tissue viscosity. To do so, we analyse cell adhesion in Xenopus embryonic tissues and determine a number of parameters, including tissue surface tension (as a measure of cohesion), cell contact fluctuation and cortical tension. In the tissues studied, the ratio of surface tension to viscosity, which has the dimension of a velocity, is 1.8 µm/min. This characteristic velocity reflects the rate of cell-cell boundary contraction during rearrangement, and sets a limit to rearrangement rates. Moreover, we propose that, in these tissues, cell movement is maximally efficient. Our approach to cell rearrangement mechanics links adhesion to the resistance of a tissue to plastic deformation, identifies the characteristic velocity of the process, and provides a basis for the comparison of tissues with mechanical properties that may vary by orders of magnitude. © 2014. Published by The Company of Biologists Ltd.

  6. Cohesion: The Vital Ingredient for Successful Army Units

    DTIC Science & Technology

    1982-04-19

    responding in military life as well.𔄀 A special problem of social cohesion directly related to social background was the integration of minority troops...forces has been a powerful verification of sociological theory concerning social cohesion and organizational effectiveness. Sociological theory does not...prevent the development of groups with social cohesion committed to the military hierarchy. 2 5 Personality of Wnit Mmbers Among the characteristics

  7. Slip events propagating along a ductile mid-crustal strike-slip shear zone (Malpica-Lamego line, Variscan Orogen, NW Iberia)

    NASA Astrophysics Data System (ADS)

    Llana-Fúnez, Sergio; de Paola, Nicola; Pozzi, Giacomo; Lopez-Sanchez, Marco Antonio

    2017-04-01

    The current level of erosion in NW Iberian peninsula exposes Variscan mid-crustal depths, where widespread deformation during orogenesis produced dominantly ductile structures. It constitutes an adequate window for the observation of structures close to the brittle-plastic transition in the continental crust. The shear zone object of this work is the Malpica-Lamego line (MLL), a major Variscan structure formed in the late stages of the Variscan collision. The MLL is a mostly strike-slip major structure that offsets laterally by several kilometres the assembly of allochthonous complexes, that contain a sub-horizontal suture zone, which are the remnants of the plate duplication during the Variscan convergence. The shear zone is exposed along the northern coast of Galicia (NW Spain). It is characterized by phyllonites and quartz-mylonites in a zone which is tens of meters in thickness. Within the phyllonites, a few seams of cataclastic rocks have been found in bands along the main fabric. Their cohesive character, the parallelism between the different bands, the fact that host rocks maintain mineral assemblage and that no cross-cutting relations in the field were identified, are considered indicative of these brittle structures forming coetaneously with the ductile shearing producing the phyllonites. Samples from the phyllonites, also from quartz-mylonites, were prepared and powdered to characterize friction properties in a rotary shear apparatus at high, seismic velocities (m/s). Preliminary experiments run at room temperature and effective normal stresses between 10 to 25 MPa, show that friction coefficients µ are relatively high and a limited drop in friction coefficient occurs after 10-20 cm of slip, with µ decreasing from 0.7 to 0.5. Fracturing seems coetaneous with dominant ductile shearing within the shear zone, however, given the frictional properties of the phyllonites, it is unlikely that brittle deformation nucleates within these fault rocks. Instead, it seems that faulting originated in other sectors of the fault zone, and then propagated through the studied section.

  8. Trajectories of childhood neighbourhood cohesion and adolescent mental health: evidence from a national Canadian cohort.

    PubMed

    Kingsbury, M; Kirkbride, J B; McMartin, S E; Wickham, M E; Weeks, M; Colman, I

    2015-11-01

    The objective of this study was to examine associations between trajectories of childhood neighbourhood social cohesion and adolescent mental health and behaviour. This study used data from the National Longitudinal Survey of Children and Youth, a nationally representative sample of Canadian children. The sample included 5577 children aged 0-3 years in 1994-1995, prospectively followed until age 12-15 years. Parental perceived neighbourhood cohesion was assessed every 2 years. Latent growth class modelling was used to identify trajectories of neighbourhood cohesion. Mental health and behavioural outcomes were self-reported at age 12-15 years. Logistic regression was used to examine associations between neighbourhood cohesion trajectories and outcomes, adjusting for potential confounders. Five distinct trajectories were identified: 'stable low' (4.2%); 'moderate increasing' (9.1%); 'stable moderate' (68.5%); 'high falling' (8.9%); and 'stable high' (9.3%). Relative to those living in stable moderately cohesive neighbourhoods, those in stable low cohesive neighbourhoods were more likely to experience symptoms of anxiety/depression [odds ratio (OR) = 1.73, 95% confidence interval (CI) 1.04-2.90] and engage in indirect aggression (OR = 1.62, 95% CI 1.07-2.45). Those with improvements in neighbourhood cohesion had significantly lower odds of hyperactivity (OR = 0.67, 95% CI 0.46-0.98) and indirect aggression (OR = 0.69, 95% CI 0.49-0.96). In contrast, those with a decline in neighbourhood cohesion had increased odds of hyperactivity (OR = 1.67, 95% CI 1.21-2.29). Those in highly cohesive neighbourhoods in early childhood were more likely to engage in prosocial behaviour ('high falling': OR = 1.93, 95% CI 1.38-2.69; 'stable high': OR = 1.89, 95% CI 1.35-2.63). These results suggest that neighbourhood cohesion in childhood may have time-sensitive effects on several domains of adolescent mental health and behaviour.

  9. Trajectories of Childhood Neighbourhood Cohesion and Adolescent Mental Health: Evidence from a National Canadian Cohort

    PubMed Central

    Kingsbury, Mila; Kirkbride, James B; McMartin, Seanna E; Wickham, Maeve E; Weeks, Murray; Colman, Ian

    2017-01-01

    Background The objective of this study was to examine associations between trajectories of childhood neighbourhood social cohesion and adolescent mental health and behaviour. Methods This study used data from the National Longitudinal Survey of Children and Youth, a nationally representative sample of Canadian children. The sample included 5577 children aged 0-3 in 1994/95, prospectively followed until age 12-15. Parental perceived neighbourhood cohesion was assessed every two years. Latent growth class modeling was used to identify trajectories of neighbourhood cohesion. Mental health and behavioural outcomes were self-reported at age 12-15 years. Logistic regression was used to examine associations between neighbourhood cohesion trajectories and outcomes, adjusting for potential confounders. Results Five distinct trajectories were identified: ‘stable low’ (4.2%); ‘moderate increasing’ (9.1%); ‘stable moderate’ (68.5%); ‘high falling’ (8.9%); and, ‘stable high’ (9.3%). Relative to those living in stable moderately cohesive neighbourhoods, those in stable low cohesive neighbourhoods were more likely to experience symptoms of anxiety/depression (OR=1.75; 95%CI: 1.05,2.92) and engage in indirect aggression (OR=1.59; 95%CI: 1.05,2.40). Those with improvements in neighbourhood cohesion had significantly lower odds of hyperactivity (OR=0.68; 95%CI: 0.46,0.99) and indirect aggression (OR=0.68; 95%CI: 0.49,0.95). In contrast, those with a decline in neighbourhood cohesion had increased odds of hyperactivity (OR=1.65; 95%CI: 1.20,2.27). Those in highly cohesive neighbourhoods in early childhood were more likely to engage in prosocial behaviour (‘high falling’: OR=1.95; 95%CI: 1.40,2.72; ‘stable high’: OR=1.91; 95%CI: 1.37,2.66). Conclusions These results suggest that neighbourhood cohesion in childhood may have time-sensitive effects on several domains of adolescent mental health and behaviour. PMID:26169730

  10. Differences by Sexual Orientation in Perceptions of Neighborhood Cohesion: Implications for Health.

    PubMed

    Henning-Smith, Carrie; Gonzales, Gilbert

    2018-06-01

    A large body of research documents the relationship between health and place, including the positive association between neighborhood cohesion and health. However, very little research has examined neighborhood cohesion by sexual orientation. This paper addresses that gap by examining differences in perceived neighborhood cohesion by sexual orientation. We use data from the 2016 National Health Interview Survey (n = 28,164 respondents aged 18 years and older) to examine bivariate differences by sexual orientation in four measures of neighborhood cohesion. We then use ordered logistic regression models to assess the relationship between sexual orientation and a scaled measure of neighborhood cohesion, adjusting for socio-demographic characteristics, living arrangements, health status, region, and neighborhood tenure. We find that lesbian, gay, and bisexual (LGB) adults are less likely to say that they live in a close-knit neighborhood (54.6 vs. 65.6%, p < 0.001), they can count on their neighbors (74.7 vs. 83.1%, p < 0.001), they trust their neighbors (75.5 vs. 83.7%, p < 0.001), or people in their neighborhood help each other out (72.9 vs. 83.1%, p < 0.001), compared to heterosexual adults. Even after controlling for socio-demographic factors, neighborhood cohesion scores are lower for LGB adults compared to heterosexual adults (odds ratio of better perceived neighborhood cohesion for sexual minorities: 0.70, p < 0.001). Overall, LGB adults report worse neighborhood cohesion across multiple measures, even after adjusting for individual characteristics and neighborhood tenure. Because living in a cohesive neighborhood is associated with better health outcomes, future research, community-level initiatives, and public policy efforts should focus on creating welcoming neighborhood environments for sexual minorities.

  11. The Impact of Electronic Health Records and Teamwork on Diabetes Care Quality

    PubMed Central

    Graetz, Ilana; Huang, Jie; Brand, Richard; Shortell, Stephen M.; Rundall, Thomas G.; Bellows, Jim; Hsu, John; Jaffe, Marc; Reed, Mary E.

    2016-01-01

    Objective Evidence of the impact Electronic Health Records (EHR) on clinical outcomes remains mixed. The impact EHRs likely depends on the organizational context in which they are used. We focus on one aspect of the organizational context: cohesion of primary care teams. We examined whether team cohesion among primary care team members changed the association of EHR use and changes in clinical outcomes for patients with diabetes. Study Design We combined provider-reported primary care team cohesion with lab values for patients with diabetes collected during the staggered EHR implementation (2005–2009). We used multivariate regression models with patient-level fixed effects to assess whether team cohesion levels changed the association between outpatient EHR use and clinical outcomes for patients with diabetes. Subjects 80,611 patients with diabetes mellitus. Measures Changes in hemoglobin A1c (HbA1c) and low-density lipoprotein cholesterol (LDL-C) Results For HbA1c, EHR use was associated with an average decrease of 0.11% for patients with higher cohesion primary care teams compared with a decrease of 0.08% for patients with lower cohesion teams (difference 0.02% in HbA1c, 95%CI: 0.01–0.03). For LDL-C, EHR use was associated with a decrease of 2.15 mg/dL for patients with higher cohesion primary teams compared with a decrease of 1.42 mg/dL for patients with lower cohesion teams (difference 0.73 mg/dL, 95%CI: 0.41–1.11 mg/dL). Conclusions Patients cared for by higher cohesion primary care teams experienced modest but statistically significantly greater EHR-related health outcome improvements, compared with patients cared for by providers practicing in lower cohesion teams. PMID:26671699

  12. Unit cohesion, traumatic exposure and mental health of military personnel.

    PubMed

    Kanesarajah, J; Waller, M; Zheng, W Y; Dobson, A J

    2016-06-01

    The benefit of military unit cohesion to morale and psychological resilience is well established. But it remains unclear whether unit cohesion modifies the association between deployment-related traumatic exposure and mental health problems. To examine the association between unit cohesion, traumatic exposure and poor mental health [symptoms of post-traumatic stress disorder (PTSD), psychological distress and alcohol dependency] and assess whether the relationship between traumatic exposure and poor mental health differs by level of unit cohesion. A self-reported cross-sectional survey of Australian military personnel deployed to Iraq or Afghanistan between 2001 and 2009. Among 11411 participants, those with low levels of unit cohesion had higher odds of PTSD symptoms [aOR (95% CI): 2.54 (1.88, 3.42)], very high psychological distress [aOR (95% CI): 4.28 (3.04, 6.02)] and a high level of alcohol problems [aOR (95% CI): 1.71 (1.32, 2.22)] compared with those reporting high unit cohesion on deployment. Higher exposure to traumatic events on deployment was associated with greater risk of PTSD symptoms, very high levels of psychological distress and high levels of alcohol problems in this cohort. However, there was no evidence of a statistically significant interaction between unit cohesion and traumatic exposures in influencing poor mental health. Our findings suggest that both unit cohesion and traumatic exposure are independently associated with poor mental health. Efforts to improve military unit cohesion may help to improve the mental health resilience of military personnel, regardless of their level of traumatic exposure. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  13. Interfacial Properties and Mechanisms Dominating Gas Hydrate Cohesion and Adhesion in Liquid and Vapor Hydrocarbon Phases.

    PubMed

    Hu, Sijia; Koh, Carolyn A

    2017-10-24

    The interfacial properties and mechanisms of gas hydrate systems play a major role in controlling their interparticle and surface interactions, which is desirable for nearly all energy applications of clathrate hydrates. In particular, preventing gas hydrate interparticle agglomeration and/or particle-surface deposition is critical to the prevention of gas hydrate blockages during the exploration and transportation of oil and gas subsea flow lines. These agglomeration and deposition processes are dominated by particle-particle cohesive forces and particle-surface adhesive force. In this study, we present the first direct measurements on the cohesive and adhesive forces studies of the CH 4 /C 2 H 6 gas hydrate in a liquid hydrocarbon-dominated system utilizing a high-pressure micromechanical force (HP-MMF) apparatus. A CH 4 /C 2 H 6 gas mixture was used as the gas hydrate former in the model liquid hydrocarbon phase. For the cohesive force baseline test, it was found that the addition of liquid hydrocarbon changed the interfacial tension and contact angle of water in the liquid hydrocarbon compared to water in the gas phase, resulting in a force of 23.5 ± 2.5 mN m -1 at 3.45 MPa and 274 K for a 2 h annealing time period in which hydrate shell growth occurs. It was observed that the cohesive force was inversely proportional to the annealing time, whereas the force increased with increasing contact time. For a longer contact time (>12 h), the force could not be measured because the two hydrate particles adhered permanently to form one large particle. The particle-surface adhesive force in the model liquid hydrocarbon was measured to be 5.3 ± 1.1 mN m -1 under the same experimental condition. Finally, with a 1 h contact time, the hydrate particle and the carbon steel (CS) surface were sintered together and the force was higher than what could be measured by the current apparatus. A possible mechanism is presented in this article to describe the effect of contact time on the particle-particle cohesive force based on the capillary liquid bridge model. A model adapted from the capillary liquid bridge equation has been used to predict the particle-particle cohesive force as a function of contact time, showing close agreement with the experimental data. By comparing the cohesive forces results from gas hydrates for both gas and liquid bulk phases, the surface free energy of a hydrate particle was calculated and found to dominate the changes in the interaction forces with different continuous bulk phases.

  14. HIV Stigma Mediates the Association Between Social Cohesion and Consistent Condom Use Among Female Sex Workers Living with HIV in the Dominican Republic.

    PubMed

    Carrasco, Maria Augusta; Nguyen, Trang Q; Barrington, Clare; Perez, Martha; Donastorg, Yeycy; Kerrigan, Deanna

    2018-07-01

    Evidence indicates that social cohesion is a successful strategy to improve consistent condom use (CCU) among female sex workers. However, the individual and layered or combined effect that various types of overlapping stigmas may have on CCU between female sex workers living with HIV and their clients and steady partners has not been analyzed. Drawing on the Abriendo Puertas cohort of female sex workers living with HIV in the Dominican Republic, we used structural equation modeling to test the hypothesis that both HIV stigma and sex work stigma mediate the association between social cohesion and CCU and that they have a layered effect. The results indicated that HIV stigma mediated the association between social cohesion and CCU with clients and partners, while sex work-related stigma did not. There was no evidence of a layered HIV stigma and sex work stigma effect, which may be due to methodological limitations to handle highly correlated latent variables. Findings highlight the need to address internalized HIV stigma within the context of community-based approaches to enhance their HIV prevention impact. This will help to reduce the risk of HIV re-infection with a new distinct HIV viral strain, STI infection, and onward HIV transmission among female sex workers living with HIV.

  15. The effect of the averaged structural and energetic features on the cohesive energy of nanocrystals

    NASA Astrophysics Data System (ADS)

    Ali Safaei

    2010-03-01

    The size dependency of the cohesive energy of nanocrystals is obtained in terms of their averaged structural and energetic properties, which are in direct proportion with their cohesive energies. The significance of the effect of the geometrical shape of nanoparticles on their thermal stability has been discussed. The model has been found to have good prediction for the case of Cu and Al nanoparticles, with sizes in the ranges of 1-22 nm and 2-22 nm, respectively. Defining a new parameter, named as the surface-to-volume energy-contribution ratio, the relative thermal stabilities of different nanoclusters and their different surface-crystalline faces are discussed and compared to the molecular dynamic (MD) simulation results of copper nanoclusters. Finally, based on the size dependency of the cohesive energy, a formula for the size-dependent diffusion coefficient has been presented which includes the structural and energetic effects. Using this formula, the faster-than-expected interdiffusion/alloying of Au(core)-Ag(shell) nanoparticles with the core-shell structure, the Au-core diameter of 20 nm and the Ag-shell thickness of 2.91 nm, has been discussed and the calculated diffusion coefficient has been found to be consistent with its corresponding experimental value.

  16. Investigation into process-induced de-aggregation of cohesive micronised API particles.

    PubMed

    Hoffmann, Magnus; Wray, Patrick S; Gamble, John F; Tobyn, Mike

    2015-09-30

    The aim of this study was to assess the impact of unit processes on the de-aggregation of a cohesive micronised API within a pharmaceutical formulation using near-infrared chemical imaging. The impact on the primary API particles was also investigated using an image-based particle characterization system with integrated Raman analysis. The blended material was shown to contain large, API rich domains which were distributed in-homogeneously across the sample, suggesting that the blending process was not aggressive enough to disperse aggregates of micronised drug particles. Cone milling, routinely used to improve the homogeneity of such cohesive formulations, was observed to substantially reduce the number and size of API rich domains; however, several smaller API domains survived the milling process. Conveyance of the cone milled formulation through the Alexanderwerk WP120 powder feed system completely dispersed all remaining aggregates. Importantly, powder feed transmission of the un-milled formulation was observed to produce an equally homogeneous API distribution. The size of the micronised primary drug particles remained unchanged during powder feed transmission. These findings provide further evidence that this powder feed system does induce shear, and is in fact better able to disperse aggregates of a cohesive micronised API within a blend than the blend-mill-blend step. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  17. On Critical States, Rupture States and Interlocking Strength of Granular Materials.

    PubMed

    Szalwinski, Chris M

    2017-07-27

    The Mohr-Coulomb theory of strength identifies cohesion and internal friction as the two principal contributions to the shear strength of a granular material. The contribution of cohesion in over-compacted granular materials has been challenged and replacing cohesion with interlocking has been proposed. A theory of rupture strength that includes interlocking is derived herein. The physics-chemistry concept of critical state is elaborated to accommodate granular materials, based on empirical definitions established in the fields of soil mechanics and bulk solids' flow. A surface in state space, called the critical compaction surface, separates over-compacted states from lightly compacted states. The intersection of this surface with the Mohr-Coulomb envelope forms the critical state surface for a granular material. The rupture strength of an over-compacted granular material is expressed as the sum of cohesion, internal friction and interlocking strength. Interlocking strength is the shear strength contribution due to over-compaction and vanishes at critical state. The theory allows migrations from one critical state to another. Changes in specific volume during such migrations are related to changes in mean-normal effective stress and uncoupled from changes in shearing strain. The theory is reviewed with respect to two established research programs and underlying assumptions are identified.

  18. Neighborhood Social Cohesion and Sleep Outcomes in the Native Hawaiian and Pacific Islander National Health Interview Survey.

    PubMed

    Young, Marielle C; Gerber, Monica W; Ash, Tayla; Horan, Christine M; Taveras, Elsie M

    2018-05-16

    Native Hawaiians and Pacific Islanders (NHPIs) have the lowest attainment of healthy sleep duration among all racial and ethnic groups in the United States. We examined associations of neighborhood social cohesion with sleep duration and quality. Cross-sectional analysis of 2,464 adults in the NHPI National Health Interview Survey (2014). Neighborhood social cohesion was categorized as a continuous and categorical variable into low (<12), medium (12-14) and high (>15) according to tertiles of the distribution of responses. We used multinomial logistic regression to examine the adjusted odds ratio of short and long sleep duration relative to intermediate sleep duration. We used binary logistic regression for dichotomous sleep quality outcomes. Sleep outcomes were modeled as categorical variables. 40% of the cohort reported short (<7 hours) sleep duration and only 4% reported long (>9 hours) duration. Mean (SE, range) social cohesion score was 12.4 units (0.11, 4-16) and 23% reported low social cohesion. In multivariable models, each 1 SD decrease in neighborhood social cohesion score was associated with higher odds of short sleep duration (OR: 1.14, 95% CI: 1.02, 1.29). Additionally, low social cohesion was associated with increased odds of short sleep duration (OR: 1.53, 95% CI: 1.10, 2.13). No associations between neighborhood social cohesion and having trouble falling or staying asleep and feeling well rested were found. Low neighborhood social cohesion is associated with short sleep duration in NHPIs.

  19. The Relationship of Individual Difference and Group Process Variables with Self-Managed Team Performance: A Field Investigation

    DTIC Science & Technology

    2001-12-15

    emotional stability, openness to experience, agreeableness, learning and performance goal orientation) and process variables ( social cohesion and group...both subjective performance measures and 6 of the 7 objective performance measures over that of social cohesion . Social cohesion predicted unique...variance in team member satisfaction over that of group potency. Additionally, social cohesion mediated the relationship between agreeableness and team

  20. Formal and Informal Work Group Relationships With Performance: A Moderation Model Using Social

    DTIC Science & Technology

    2006-03-01

    networks can be divided into two main categories: formal and informal (Scott, 2000). Similar distinctions have been made between task and social cohesion (Mullen...Cooper, 1994; Carron, Widmeyer, & Brawley, 1985; Zaccaro & Lowe, 1986; Zaccaro & McCoy, 1988). Social cohesion has been defined as...performance and social cohesion and performance (Beal et al., 2003). This move toward a multidimensional view of cohesion is consistent with the

  1. Neighborhood Social Cohesion and Depressive Symptoms Among Latinos: Does Use of Community Resources for Physical Activity Matter?

    PubMed

    Perez, Lilian G; Arredondo, Elva M; McKenzie, Thomas L; Holguin, Margarita; Elder, John P; Ayala, Guadalupe X

    2015-10-01

    Greater neighborhood social cohesion is linked to fewer depressive symptoms and greater physical activity, but the role of physical activity on the relationship between neighborhood social cohesion and depression is poorly understood. The purpose of the study was to examine the effects of physical activity on the association between neighborhood social cohesion and depressive symptoms. Multivariate logistic regression tested the moderation of self-reported leisure-time moderate-to-vigorous physical activity (LTMVPA) and active use of parks or recreational facilities on the association between neighborhood social cohesion and depressive symptoms among 295 randomly selected Latino adults who completed a face-to-face interview. After adjusting for age, gender, and income, neighborhood social cohesion and depressive symptoms were inversely related (OR = 0.8; 95% CI: 0.5-1.2). Active use of parks or recreational facilities moderated the association between neighborhood social cohesion and depressive symptoms but meeting the recommendations for LTMVPA did not. Latinos who reported active use of parks or recreational facilities and higher levels of neighborhood social cohesion had fewer depressive symptoms than peers who did not use these spaces. Future studies are needed to test strategies for promoting active use of parks or recreational facilities to address depression in Latinos.

  2. Group cohesion and social support of the nurses in a special unit and a general unit in Korea.

    PubMed

    Ko, Yu Kyung

    2011-07-01

    To identify the degree of group cohesion and social support of nurses in special and general units in hospitals in Korea, and to compare group cohesion and social support between the two groups. The level of commitment nurses have to their organizations has been shown to correlate with work group cohesion and social support. The participants were 1751 nurses who were working in Korean hospitals. Data were collected using a structured questionnaire and were analysed using SAS. The statistical methods included: descriptive statistics, t-test, anova and Pearson's correlation coefficients. Group cohesion of nurses on special wards was significantly higher than for nurses on general wards. No significant difference was found between types of units in terms of social support. The degree of group cohesion was significantly different in terms of the respondents' clinical experience, position, religion, job satisfaction, number of supportive superiors and number of supportive peers. A statistically significant correlation was found between group cohesion scores and degree of social support. Hospital management can accomplish their goals more effectively through knowledge of the level of group cohesion, superior support and peer support for nursing staff in accordance with unit specialty. © 2011 The Author. Journal compilation © 2011 Blackwell Publishing Ltd.

  3. The association between EHRs and care coordination varies by team cohesion.

    PubMed

    Graetz, Ilana; Reed, Mary; Shortell, Stephen M; Rundall, Thomas G; Bellows, Jim; Hsu, John

    2014-02-01

    To examine whether primary care team cohesion changes the association between using an integrated outpatient-inpatient electronic health record (EHR) and clinician-rated care coordination across delivery sites. Self-administered surveys of primary care clinicians in a large integrated delivery system, collected in 2005 (N=565), 2006 (N=678), and 2008 (N=626) during the staggered implementation of an integrated EHR (2005-2010), including validated questions on team cohesion. Using multivariable regression, we examined the combined effect of EHR use and team cohesion on three dimensions of care coordination across delivery sites: access to timely and complete information, treatment agreement, and responsibility agreement. Among clinicians working in teams with higher cohesion, EHR use was associated with significant improvements in reported access to timely and complete information (53.5 percent with EHR vs. 37.6 percent without integrated-EHR), agreement on treatment goals (64.3 percent vs. 50.6 percent), and agreement on responsibilities (63.9 percent vs. 55.2 percent, all p<.05). We found no statistically significant association between use of the integrated-EHR and reported care coordination in less cohesive teams. The association between EHR use and reported care coordination varied by level of team cohesion. EHRs may not improve care coordination in less cohesive teams. © Health Research and Educational Trust.

  4. Cohesion, leadership, mental health stigmatisation and perceived barriers to care in UK military personnel.

    PubMed

    Jones, Norman; Campion, Ben; Keeling, Mary; Greenberg, Neil

    2018-02-01

    Military research suggests a significant association between leadership, cohesion, mental health stigmatisation and perceived barriers to care (stigma/BTC). Most studies are cross sectional, therefore longitudinal data were used to examine the association of leadership and cohesion with stigma/BTC. Military personnel provided measures of leadership, cohesion, stigma/BTC, mental health awareness and willingness to discuss mental health following deployment (n = 2510) and 4-6 months later (n = 1636). At follow-up, baseline leadership and cohesion were significantly associated with stigma/BTC; baseline cohesion alone was significantly associated with awareness of and willingness to discuss mental health at follow-up. Over time, changes in perceived leadership and cohesion were significantly associated with corresponding changes in stigma/BTC levels. Stigma/BTC content was similar in both surveys; fear of being viewed as weak and being treated differently by leaders was most frequently endorsed while thinking less of a help-seeking team member and unawareness of potential help sources were least common. Effective leadership and cohesion building may help to reduce stigma/BTC in military personnel. Mental health awareness and promoting the discussion of mental health matters may represent core elements of supportive leader behaviour. Perceptions of weakness and fears of being treated differently represent a focus for stigma/BTC reduction.

  5. Neighborhood social cohesion and depressive symptoms among Latinos: Does use of community resources for physical activity matter?

    PubMed Central

    Perez, Lilian G.; Arredondo, Elva M.; McKenzie, Thomas L.; Holguin, Margarita; Elder, John P.; Ayala, Guadalupe X.

    2017-01-01

    Background Greater neighborhood social cohesion is linked to fewer depressive symptoms and greater physical activity, but the role of physical activity on the relationship between neighborhood social cohesion and depression is poorly understood. The purpose of the study was to examine the effects of physical activity on the association between neighborhood social cohesion and depressive symptoms. Methods Multivariate logistic regression tested the moderation of self-reported leisure time moderate-to vigorous-physical activity (LTMVPA) and active use of parks or recreational facilities on the association between neighborhood social cohesion and depressive symptoms among 295 randomly selected Latino adults who completed a face-to-face interview. Results After adjusting for age, gender, and income, neighborhood social cohesion and depressive symptoms were inversely related (OR=0.8; 95% CI: 0.5–1.2). Active use of parks or recreational facilities moderated the association between neighborhood social cohesion and depressive symptoms but meeting the recommendations for LTMVPA did not. Latinos who reported active use of parks or recreational facilities and higher levels of neighborhood social cohesion had fewer depressive symptoms than peers who did not use these spaces. Conclusions Future studies are needed to test strategies for promoting active use of parks or recreational facilities to address depression in Latinos. PMID:25599244

  6. Ethnic-related stressors in the war zone: case studies of Asian American Vietnam veterans.

    PubMed

    Loo, Chalsa M; Lim, Brian R; Koff, Gabriel; Morton, Robert K; Kiang, Peter N C

    2007-09-01

    Empirical research has shown that exposure to race-related stressors in the military by Asian American Pacific Islander Vietnam veterans, now reliably measurable, contributes uniquely and significantly to post-traumatic stress disorder (PTSD) symptoms and generalized psychiatric distress; moreover, studies reveal that adverse race-related events can meet Diagnostic and Statistical Manual of Mental Disorders-IV criteria for a PTSD diagnosis. Competence in treating PTSD or general psychiatric distress requires understanding the types of, and effects of, adverse race-related events experienced by ethnic minority veterans. Case studies highlight two types of race-related stressors-"bicultural identification and conflict" and "racial stigmatization"-which placed the veteran at greater risk of death and reduced cohesion with fellow service members. The studies demonstrate the presence of race-related stressors in one or more of the four major types of war zone stressors: traditional combat, atrocities-abusive violence, perceived threat, and malevolent environment. These case studies supplement the empirical findings on race-related stressors and PTSD, enlarging the clinician's understanding of this unique type of mental health risk factor.

  7. Are diverse societies less cohesive? Testing contact and mediated contact theories.

    PubMed

    McKenna, Sarah; Lee, Eunro; Klik, Kathleen A; Markus, Andrew; Hewstone, Miles; Reynolds, Katherine J

    2018-01-01

    Previous research has demonstrated that there is a negative relationship between ethnic diversity in a local community and social cohesion. Often the way social cohesion is assessed, though, varies across studies and only some aspects of the construct are included (e.g., trust). The current research explores the relationship between diversity and social cohesion across a number of indicators of social cohesion including neighbourhood social capital, safety, belonging, generalized trust, and volunteering. Furthermore, social psychological theories concerning the role of positive contact and its impact on feelings of threat are investigated. Using a sample of 1070 third generation 'majority' Australians and structural equation modelling (SEM), findings suggest ethnic diversity is related to positive intergroup contact, and that contact showed beneficial impacts for some indicators of social cohesion both directly and indirectly through reducing perceived threat. When interethnic contact and perceived threat are included in the model there is no direct negative effect between diversity and social cohesion. The theoretical implications of these findings are outlined including the importance of facilitating opportunities for positive contact in diverse communities.

  8. Perceived Social Cohesion, Frequency of Going Out, and Depressive Symptoms in Older Adults

    PubMed Central

    Choi, Namkee G.; Kim, Jinseok; DiNitto, Diana M.; Marti, C. Nathan

    2015-01-01

    Objective: To examine both cross-sectional and longitudinal relationships between older adults’ perceptions of social cohesion in their community and depressive symptoms and the potential mediating effect of the frequency of going outside one’s home/building. Method: Using two waves (T1 and T2) of the National Health and Aging Trend Study (n = 5,326), gender-stratified structural equation models were estimated to determine direct and indirect effects of perceived social cohesion on depressive symptoms. Results: At T1, both perceived cohesion and frequency of going out were directly associated with depressive symptoms; however, perceived cohesion predicted frequency of going out only for women. At T2, only frequency of going out was directly associated with depressive symptoms, although perceived cohesion predicted frequency of going out for both genders. T1 perceived cohesion did not predict T2 depressive symptoms. T1 depressive symptoms were the strongest predictor of T2 depressive symptoms. Conclusion: The findings underscore the importance of enhancing the social environment in promoting mental health in late life through active aging. PMID:28138478

  9. Perceived Social Cohesion, Frequency of Going Out, and Depressive Symptoms in Older Adults: Examination of Longitudinal Relationships.

    PubMed

    Choi, Namkee G; Kim, Jinseok; DiNitto, Diana M; Marti, C Nathan

    2015-01-01

    Objective: To examine both cross-sectional and longitudinal relationships between older adults' perceptions of social cohesion in their community and depressive symptoms and the potential mediating effect of the frequency of going outside one's home/building. Method: Using two waves (T1 and T2) of the National Health and Aging Trend Study ( n = 5,326), gender-stratified structural equation models were estimated to determine direct and indirect effects of perceived social cohesion on depressive symptoms. Results: At T1, both perceived cohesion and frequency of going out were directly associated with depressive symptoms; however, perceived cohesion predicted frequency of going out only for women. At T2, only frequency of going out was directly associated with depressive symptoms, although perceived cohesion predicted frequency of going out for both genders. T1 perceived cohesion did not predict T2 depressive symptoms. T1 depressive symptoms were the strongest predictor of T2 depressive symptoms. Conclusion: The findings underscore the importance of enhancing the social environment in promoting mental health in late life through active aging.

  10. Are diverse societies less cohesive? Testing contact and mediated contact theories

    PubMed Central

    Lee, Eunro; Klik, Kathleen A.; Markus, Andrew; Hewstone, Miles; Reynolds, Katherine J.

    2018-01-01

    Previous research has demonstrated that there is a negative relationship between ethnic diversity in a local community and social cohesion. Often the way social cohesion is assessed, though, varies across studies and only some aspects of the construct are included (e.g., trust). The current research explores the relationship between diversity and social cohesion across a number of indicators of social cohesion including neighbourhood social capital, safety, belonging, generalized trust, and volunteering. Furthermore, social psychological theories concerning the role of positive contact and its impact on feelings of threat are investigated. Using a sample of 1070 third generation ‘majority’ Australians and structural equation modelling (SEM), findings suggest ethnic diversity is related to positive intergroup contact, and that contact showed beneficial impacts for some indicators of social cohesion both directly and indirectly through reducing perceived threat. When interethnic contact and perceived threat are included in the model there is no direct negative effect between diversity and social cohesion. The theoretical implications of these findings are outlined including the importance of facilitating opportunities for positive contact in diverse communities. PMID:29596501

  11. The association between social cohesion and physical activity in canada: A multilevel analysis.

    PubMed

    Yip, Calvin; Sarma, Sisira; Wilk, Piotr

    2016-12-01

    Although previous research has shown that social cohesion may promote physical activity, social cohesion at the individual level was not always differentiated from social cohesion at the community level, and studies were often limited to specific population subgroups or geographical areas. We addressed the above limitations through the use of a multilevel modelling approach and nationally-representative data from the 2009-2014 Canadian Community Health Survey. Physical activity level was operationalized as average daily energy expenditure; social cohesion was assessed by self-rated sense of belonging to the local community; and communities were represented by Canada's Forward Sortation Areas. The sample included 245,150 respondents from 1570 communities. Geographical location was found to explain a significant proportion (4.1%) of the overall variance in physical activity level. After adjusting for age, sex, household income, education and urban-rural status, both individual- and community-level social cohesion were found to be positively associated with physical activity (p<0.001 for both). Thus, efforts to promote social cohesion and integration within communities may also promote physical activity and overall health.

  12. Aurora A-dependent CENP-A phosphorylation at inner centromeres protects bioriented chromosomes against cohesion fatigue.

    PubMed

    Eot-Houllier, Grégory; Magnaghi-Jaulin, Laura; Fulcrand, Géraldine; Moyroud, François-Xavier; Monier, Solange; Jaulin, Christian

    2018-05-14

    Sustained spindle tension applied to sister centromeres during mitosis eventually leads to uncoordinated loss of sister chromatid cohesion, a phenomenon known as "cohesion fatigue." We report that Aurora A-dependent phosphorylation of serine 7 of the centromere histone variant CENP-A (p-CENP-AS7) protects bioriented chromosomes against cohesion fatigue. Expression of a non-phosphorylatable version of CENP-A (CENP-AS7A) weakens sister chromatid cohesion only when sister centromeres are under tension, providing the first evidence of a regulated mechanism involved in protection against passive cohesion loss. Consistent with this observation, p-CENP-AS7 is detected at the inner centromere where it forms a discrete domain. The depletion or inhibition of Aurora A phenocopies the expression of CENP-AS7A and we show that Aurora A is recruited to centromeres in a Bub1-dependent manner. We propose that Aurora A-dependent phosphorylation of CENP-A at the inner centromere protects chromosomes against tension-induced cohesion fatigue until the last kinetochore is attached to spindle microtubules.

  13. A POSS based hydrogel with mechanical robustness, cohesiveness and a rapid self-healing ability by electrostatic interaction.

    PubMed

    Pu, Wanfen; Jiang, Feng; Chen, Pei; Wei, Bing

    2017-08-30

    A molecularly dispersed nano-material called POSS-NH 2 -AA was synthesized to construct a hybrid hydrogel with a rapid self-healing ability (stress 8 kPa) and excellent mechanical performance (a strain of 4683% and a stress of 37.8 kPa). The hydrogel also exhibits good cohesiveness to materials, such as plastics, glass and iron. The backbone of the POSS makes the hydrogel much stronger than the hydrogel without POSS, which accounts for the improvement in its properties. This process is facile and useful to construct mechanically strong and self-healable materials.

  14. Quantitative Characterisation of Fracturing Around the Damage Zone Surrounding New Zealand's Alpine Fault Using X-ray CT Scans of DFDP-1 Core

    NASA Astrophysics Data System (ADS)

    Williams, J. N.; Toy, V.; Massiot, C.; Mcnamara, D. D.; Wang, T.

    2015-12-01

    X-ray computer tomography (CT) scans of core recovered from the first phase of the Deep Fault Drilling Project (DFDP-1) through the Alpine Fault provide an excellent opportunity to analyse brittle deformation around the fault. In particular, assessment can be made of the heavily fractured protolith constituting the damage zone. Damage zone structures are divided into two types that result from two distinct processes: (1) "off fault damage" formed by stress changes induced by the passage of a seismic rupture and (2) "off fault deformation" that represent structures, which accommodate strain around the fault that was not localised on the principal slip zone (PSZ). The distribution of these damage zones structures within CT scans of the recovered core was measured along a scanline parallel to the core axis and assessed using a weighted moving average technique to account for orientation bias. The results of this analysis reveal that within the part of the fault rocks sampled by DFDP-1 there is no increase in density of these structures towards the PSZ. This is in agreement with independent analysis using Borehole Televiewer Data of the DFDP-1B borehole. Instead, we consider the density of these structures to be controlled to the first order by lithology, which modulates the mechanical properties of the fault rocks such as its frictional strength and cohesion. Comparisons of fracture density to p-wave velocities obtained from wireline logs indicate they are independent of each other, therefore, for the cores sampled in this study fractures impart no influence on the elastic properties of the rock. This is consistent with the observation from core that the majority of fractures are cemented. We consider how this might influence future rupture dynamics.

  15. Effect of clay type on the velocity and run-out distance of cohesive sediment gravity flows

    NASA Astrophysics Data System (ADS)

    Baker, Megan; Baas, Jaco H.; Malarkey, Jonathan; Kane, Ian

    2016-04-01

    Novel laboratory experiments in a lock-exchange flume filled with natural seawater revealed that sediment gravity flows (SGFs) laden with kaolinite clay (weakly cohesive), bentonite clay (strongly cohesive) and silica flour (non-cohesive) have strongly contrasting flow properties. Knowledge of cohesive clay-laden sediment gravity flows is limited, despite clay being one of the most abundant sediment types on earth and subaqueous SGFs transporting the greatest volumes of sediment on our planet. Cohesive SGFs are particularly complex owing to the dynamic interplay between turbulent and cohesive forces. Cohesive forces allow the formation of clay flocs and gels, which increase the viscosity and shear strength of the flow, and attenuate shear-induced turbulence. The experimental SGFs ranged from dilute turbidity currents to dense debris flows. For each experiment, the run-out distance, head velocity and thickness distribution of the deposit were measured, and the flow properties were recorded using high-resolution video. Increasing the volume concentration of kaolinite and bentonite above 22% and 17%, respectively, reduced both the maximum head velocity and the run-out distances of the SGFs. We infer that increasing the concentration of clay particles enhances the opportunity for the particles to collide and flocculate, thus increasing the viscosity and shear strength of the flows at the expense of turbulence, and reducing their forward momentum. Increasing the volume concentration in the silica-flour laden flows from 1% to 46% increased the maximum head velocity, owing to the gradual increase in excess density. Thereafter, however, intergranular friction is inferred to have attenuated the turbulence, causing a rapid reduction in the maximum head velocity and run-out distance as suspended sediment concentration was increased. Moving from flows carrying bentonite via kaolinite to silica flour, a progressively larger volumetric suspended sediment concentration was needed to produce similar run-out distances and maximum head velocities. Strongly cohesive bentonite flows were able to create a stronger network of particle bonds than weakly cohesive kaolinite flows of a similar concentration, thus producing the lower maximum head velocities and run-out distances observed. The lack of cohesion in the silica-flour laden flows meant that extremely high suspended sediment concentrations, i.e. close to the cubic packing density, were required to produce a high enough frictional strength to reduce the forward momentum of these flows. These experimental results can be used to improve our understanding of the deposit geometry and run-out distance of fine-grained SGFs in the natural environment. We suggest that natural SGFs that carry weakly cohesive clays (e.g. kaolinite) reach a greater distance from their origin than flows that contain strongly cohesive clays (e.g. bentonite) at similar suspended sediment concentrations, whilst equivalent fine-grained, non-cohesive SGFs travel the furthest. In addition, weakly cohesive SGFs may cover a larger surface area and have thinner deposits, with important ramifications for the architecture of stacked event beds.

  16. Assessing the psychometric and ecometric properties of neighborhood scales using adolescent survey data from urban and rural Scotland.

    PubMed

    Martin, Gina; Inchley, Joanna; Humphris, Gerry; Currie, Candace

    2017-03-28

    Despite the well-established need for specific measurement instruments to examine the relationship between neighborhood conditions and adolescent well-being outcomes, few studies have developed scales to measure features of the neighborhoods in which adolescents reside. Moreover, measures of neighborhood features may be operationalised differently by adolescents living in different levels of urban/rurality. This has not been addressed in previous studies. The objectives of this study were to: 1) establish instruments to measure adolescent neighborhood features at both the individual and neighborhood level, 2) assess their psychometric and ecometric properties, 3) test for invariance by urban/rurality, and 4) generate neighborhood level scores for use in further analysis. Data were from the Scottish 2010 Health Behaviour in School-aged Children Survey, which included an over-sample of rural adolescents. The survey responses of interest came from questions designed to capture different facets of the local area in which each respondent resided. Intermediate data zones were used as proxies for neighborhoods. Internal consistency was evaluated by Cronbach's alpha. Invariance was examined using confirmatory factor analysis. Multilevel models were used to estimate ecometric properties and generate neighborhood scores. Two constructs labeled neighborhood social cohesion and neighborhood disorder were identified. Adjustment was made to the originally specified model to improve model fit and measures of invariance. At the individual level, reliability was .760 for social cohesion and .765 for disorder, and between .524 and .571 for both constructs at the neighborhood level. Individuals in rural areas experienced greater neighborhood social cohesion and lower levels of neighborhood disorder compared with those in urban areas. The scales are appropriate for measuring neighborhood characteristics experienced by adolescents across urban and rural Scotland, and can be used in future studies of neighborhoods and health. However, trade-offs between neighborhood sample size and reliability must be considered.

  17. Effect of hydro mechanical coupling on natural fracture network formation in sedimentary basins

    NASA Astrophysics Data System (ADS)

    Ouraga, Zady; Guy, Nicolas; Pouya, Amade

    2018-05-01

    In sedimentary basin context, numerous phenomena, depending on the geological time span, can result in natural fracture network formation. In this paper, fracture network and dynamic fracture spacing triggered by significant sedimentation rate are studied considering mode I fracture propagation using a coupled hydro-mechanical numerical methods. The focus is put on synthetic geological structure under a constant sedimentation rate on its top. This model contains vertical fracture network initially closed and homogeneously distributed. The fractures are modelled with cohesive zone model undergoing damage and the flow is described by Poiseuille's law. The effect of the behaviour of the rock is studied and the analysis leads to a pattern of fracture network and fracture spacing in the geological layer.

  18. Validation of French and German versions of a Perceived Neighborhood Social Cohesion Questionnaire among young Swiss males, and its relationship with substance use.

    PubMed

    Dupuis, Marc; Studer, Joseph; Henchoz, Yves; Deline, Stéphane; Baggio, Stéphanie; N'Goran, Alexandra; Mohler-Kuo, Meichun; Gmel, Gerhard

    2016-02-01

    This study main purpose was the validation of both French and German versions of a Perceived Neighborhood Social Cohesion Questionnaire. The sample group comprised 5065 Swiss men from the "Cohort Study on Substance Use Risk Factors." Multigroup Confirmatory factor analysis showed that a three-factor model fits the data well, which substantiates the generalizability of Perceived Neighborhood Social Cohesion Questionnaire factor structure, regardless of the language. The Perceived Neighborhood Social Cohesion Questionnaire demonstrated excellent homogeneity (α = 95) and split-half reliability (r = .96). The Perceived Neighborhood Social Cohesion Questionnaire was sensitive to community size and participants' financial situation, confirming that it also measures real social conditions. Finally, weak but frequent correlations between Perceived Neighborhood Social Cohesion Questionnaire and alcohol, cigarette, and cannabis dependence were measured. © The Author(s) 2014.

  19. Influence of dry cohesion on the micro- and macro-mechanical properties of dense polydisperse powders & grains

    NASA Astrophysics Data System (ADS)

    Kievitsbosch, Robert; Smit, Hendrik; Magnanimo, Vanessa; Luding, Stefan; Taghizadeh, Kianoosh

    2017-06-01

    Understanding how cohesive granular materials behave is of interest for many industrial applications, such as pharmaceutical or food and civil engineering. Models of the behaviour of granular materials on the microscopic scale can be used to obtain macroscopic continuum relations by a micro-macro transition approach. The Discrete Element Method (DEM) is used to inspect the influence of cohesion on the micro and macro behaviour of granular assemblies by using an elasto-plastic cohesive contact model. Interestingly, we observe that frictional samples prepared with different cohesion values show a significant difference in pressure and coordination number in the jammed regime; the differences become more pronounced when packings are closer to the jamming density, i.e. the lowest density where the system is mechanically stable. Furthermore, we observe that cohesion has an influence on the jamming density for frictional samples, but there is no influence on the jamming density for frictionless samples.

  20. Relation between social cohesion and team performance in soccer teams.

    PubMed

    Tziner, Aharon; Nicola, Nicola; Rizac, Anis

    2003-02-01

    Investigations of the influence on team performance of team composition, in terms of task-related attributes, e.g., personality traits, cognitive abilities, often assumes this relation to be mediated by the strength (intensity) of the interpersonal relations (social cohesion) among team members. However, there has been little empirical examination of how much social cohesion actually affects team outcomes. This preliminary study sought to examine this issue using soccer teams, which have been held to resemble workplace teams. Perceptions of team cohesion were collected from 198 Israeli soccer players (comprising 36 national league teams) during the week preceding their weekly games. A significant correlation was found between the perceptions of social cohesion and the results of the soccer matches, indicating a link between team social cohesion and team performance. Implications of the results, as well as the study's limitations, are discussed, and avenues for research are suggested.

  1. Composition, concentration and deprivation: exploring their association with social cohesion among different ethnic groups in the UK.

    PubMed

    Bécares, Laia; Stafford, Mai; Laurence, James; Nazroo, James

    2011-01-01

    Although studies in the US have shown an association between the ethnic residential composition of an area and reports of decreased social cohesion among its residents, this association is not clear in the UK, and particularly for ethnic minority groups. The current study analyses a merged dataset from the 2005 and 2007 Citizenship Survey to assess the evidence for an association between social cohesion and ethnic residential concentration, composition and area deprivation across different ethnic groups in the UK. Results of the multilevel regression models show that, after adjusting for area deprivation, increased levels of social cohesion are found in areas of greater ethnic residential heterogeneity. Although different patterns emerge across ethnic groups and the measure of social cohesion used, findings consistently show that it is area deprivation, and not ethnic residential heterogeneity, which erodes social cohesion in the UK.

  2. Cohesive and mixed sediment in the Regional Ocean Modeling System (ROMS v3.6) implemented in the Coupled Ocean-Atmosphere-Wave-Sediment Transport Modeling System (COAWST r1234)

    NASA Astrophysics Data System (ADS)

    Sherwood, Christopher R.; Aretxabaleta, Alfredo L.; Harris, Courtney K.; Rinehimer, J. Paul; Verney, Romaric; Ferré, Bénédicte

    2018-05-01

    We describe and demonstrate algorithms for treating cohesive and mixed sediment that have been added to the Regional Ocean Modeling System (ROMS version 3.6), as implemented in the Coupled Ocean-Atmosphere-Wave-Sediment Transport Modeling System (COAWST Subversion repository revision 1234). These include the following: floc dynamics (aggregation and disaggregation in the water column); changes in floc characteristics in the seabed; erosion and deposition of cohesive and mixed (combination of cohesive and non-cohesive) sediment; and biodiffusive mixing of bed sediment. These routines supplement existing non-cohesive sediment modules, thereby increasing our ability to model fine-grained and mixed-sediment environments. Additionally, we describe changes to the sediment bed layering scheme that improve the fidelity of the modeled stratigraphic record. Finally, we provide examples of these modules implemented in idealized test cases and a realistic application.

  3. A multilevel analysis of social ties and social cohesion among Latinos and their neighborhoods: results from Chicago.

    PubMed

    Almeida, Joanna; Kawachi, Ichiro; Molnar, Beth E; Subramanian, S V

    2009-09-01

    Research suggests that, among Latinos, there are health benefits associated with living in a neighborhood populated with coethnics. While social networks and social cohesion are the proposed explanation for the salubrious effect and are assumed to be characteristics of Latino immigrant enclaves, evidence for this is limited. We used multilevel regression to test the relative contribution of individual race/ethnicity and neighborhood concentration of Mexican Americans as predictors of social networks and social cohesion. After accounting for personal characteristics, we found a negative association between neighborhood concentration of Mexican Americans and social cohesion. Among Latinos, living in a neighborhood with increased coethnics was associated with increased social ties. Compared to non-Latino whites, Mexican Americans reported more social ties but lower social cohesion. Contrary to the assumption that Mexican immigrant enclaves beget social cohesion, we did not find this to be true in Chicago neighborhoods.

  4. Perceptions of communication, family adaptability and cohesion: a comparison of adolescents newly diagnosed with cancer and their parents.

    PubMed

    Phillips-Salimi, Celeste R; Robb, Sheri L; Monahan, Patrick O; Dossey, Amy; Haase, Joan E

    2014-01-01

    To describe and compare adolescent and parent perspectives on communication, family adaptability and cohesion, as well as relationships among these variables, during the first month of an adolescent's cancer diagnosis. Seventy adolescent-parent dyads were enrolled as part of a larger multi-site study. The adolescents ranged in age from 11 to 19, and 61% were males. Parents were predominately mothers (83%). Dyads were predominately non-Hispanic Caucasian (63%). Measures included the Parent-Adolescent Communication Scale and the Family Adaptability and Cohesion Evaluation Scale (FACES II). Paired t-tests, Pearson correlations, intra-class correlation coefficients and multiple linear regression analyses were completed. Adolescent scores on communication, family adaptability and cohesion were significantly lower than parent scores. The inter-dyadic agreement between adolescents and parents was low. Communication, family adaptability and cohesion were examined separately for adolescents and for parents, and significant relationships were found. Both adolescent- and parent-perceived communication was significantly associated with family adaptability and cohesion outcomes. Differences were found in adolescent and parent perceptions of communication, family adaptability and cohesion. When both adolescents and parents had better perceived communication, this was associated with better perceived family adaptability and cohesion. Results suggest that the development of interventions to enhance adolescent-parent communication could help foster better family adaptability and cohesion, which may ultimately impact their psychological adjustment. In addition, understanding the degree to which adolescents and parents disagree on their perceptions, including the results that parents generally have more favorable perceptions, may be a useful starting point when developing interventions.

  5. Perceptions of Communication, Family Adaptability, and Cohesion: A Comparison of Adolescents Newly Diagnosed with Cancer and their Parents

    PubMed Central

    Phillips-Salimi, Celeste R.; Robb, Sheri L.; Monahan, Patrick O.; Dossey, Amy; Haase, Joan E.

    2017-01-01

    Purpose Describe and compare adolescent and parent perspectives on communication, family adaptability and cohesion, as well as relationships among these variables, during the first month of the adolescent’s cancer diagnosis. Methods Seventy 70 adolescent-parent dyads were enrolled as part of a larger multi-site study. Adolescents ranged in age from 11–19 and 61% were males. Parents were predominately mothers (83%). Dyads were predominately non-Hispanic Caucasian (63%). Measures included the Parent-Adolescent Communication Scale and the Family Adaptability and Cohesion Evaluation Scale (FACES II). Paired t tests, Pearson correlations, intra-class correlation coefficients, and multiple linear regression analyses were completed. Results Adolescent scores on communication, family adaptability, and cohesion were significantly lower than parent scores. The inter-dyadic agreement between adolescents and parents was low. Communication, family adaptability, and cohesion were examined separately for adolescents and for parents, significant relationships were found. Both adolescent- and parent-perceived communication was significantly associated with family adaptability and cohesion outcomes. Conclusions Differences were found in adolescent and parent perceptions of communication, family adaptability, and cohesion. When both adolescents and parents had better perceived communication, it was associated with better perceived family adaptability and cohesion. Results suggest the development of interventions to enhance adolescent-parent communication could help foster better family adaptability and cohesion which may ultimately impact their psychological adjustment. In addition, understanding the degree to which adolescents and parents disagree on their perceptions, including the results that parents generally have more favorable perceptions, may be a useful starting point when developing interventions. PMID:24501152

  6. Crack Extension and Possibility of Debonding in Encapsulation-Based Self-Healing Materials.

    PubMed

    Li, Wenting; Jiang, Zhengwu; Yang, Zhenghong

    2017-05-27

    The breakage of capsules upon crack propagation is crucial for achieving crack healing in encapsulation-based self-healing materials. A mesomechanical model was developed in this study to simulate the process of crack propagation in a matrix and the potential of debonding. The model used the extended finite element method (XFEM) combined with a cohesive zone model (CZM) in a two-dimensional (2D) configuration. The configuration consisted of an infinite matrix with an embedded crack and a capsule nearby, all subjected to a uniaxial remote tensile load. A parametric study was performed to investigate the effect of geometry, elastic parameters and fracture properties on the fracture response of the system. The results indicated that the effect of the capsule wall on the fracture behavior of the matrix is insignificant for t c / R c ≤ 0.05. The matrix strength influenced the ultimate crack length, while the Young's modulus ratio E c / E m only affected the rate of crack propagation. The potential for capsule breakage or debonding was dependent on the comparative strength between capsule and interface (S c /S int ), provided the crack could reach the capsule. The critical value of S c ,cr /S int,cr was obtained using this model for materials design.

  7. Mechanical integrity of a carbon nanotube/copper-based through-silicon via for 3D integrated circuits: a multi-scale modeling approach.

    PubMed

    Awad, Ibrahim; Ladani, Leila

    2015-12-04

    Carbon nanotube (CNT)/copper (Cu) composite material is proposed to replace Cu-based through-silicon vias (TSVs) in micro-electronic packages. The proposed material is believed to offer extraordinary mechanical and electrical properties and the presence of CNTs in Cu is believed to overcome issues associated with miniaturization of Cu interconnects, such as electromigration. This study introduces a multi-scale modeling of the proposed TSV in order to evaluate its mechanical integrity under mechanical and thermo-mechanical loading conditions. Molecular dynamics (MD) simulation was used to determine CNT/Cu interface adhesion properties. A cohesive zone model (CZM) was found to be most appropriate to model the interface adhesion, and CZM parameters at the nanoscale were determined using MD simulation. CZM parameters were then used in the finite element analysis in order to understand the mechanical and thermo-mechanical behavior of composite TSV at micro-scale. From the results, CNT/Cu separation does not take place prior to plastic deformation of Cu in bending, and separation does not take place when standard thermal cycling is applied. Further investigation is recommended in order to alleviate the increased plastic deformation in Cu at the CNT/Cu interface in both loading conditions.

  8. Sociometric network structure and its association with methamphetamine use norms among homeless youth

    PubMed Central

    Barman-Adhikari, Anamika; Begun, Stephanie; Rice, Eric; Yoshioka-Maxwell, Amanda; Perez-Portillo, Andrea

    2016-01-01

    Homeless youths' social networks are consistently linked with their substance use. Social networks influence behavior through several mechanisms, especially social norms. This study used sociometric analyses to understand whether social norms of drug use behaviors are clustered in network structures and whether these perceived norms (descriptive and injunctive) influence youths' drug use behaviors. An event-based approach was used to delineate boundaries of the two sociometric networks of homeless youth, one in Los Angeles, CA (n = 160) and the other in Santa Monica, CA (n = 130). Network characteristics included centrality (i.e., popularity) and cohesiveness (location in dense subnetworks). The primary outcome was recent methamphetamine use. Results revealed that both descriptive and injunctive norms influenced methamphetamine use. Network cohesion was found to be associated with perception of both descriptive and injunctive norms in both networks, however in opposite directions. Network interventions therefore might be effective if designed to capitalize on social influence that naturally occurs in cohesive parts of networks. PMID:27194667

  9. Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

    NASA Astrophysics Data System (ADS)

    Ren, Yiru; Jiang, Hongyong; Ji, Wenyuan; Zhang, Hanyu; Xiang, Jinwu; Yuan, Fuh-Gwo

    2018-02-01

    To predict the crashworthy composite corrugated plate, different single and stacked shell models are evaluated and compared, and a stacked shell progressive damage model combined with continuum damage mechanics is proposed and investigated. To simulate and predict the failure behavior, both of the intra- and inter- laminar failure behavior are considered. The tiebreak contact method, 1D spot weld element and cohesive element are adopted in stacked shell model, and a surface-based cohesive behavior is used to capture delamination in the proposed model. The impact load and failure behavior of purposed and conventional progressive damage models are demonstrated. Results show that the single shell could simulate the impact load curve without the delamination simulation ability. The general stacked shell model could simulate the interlaminar failure behavior. The improved stacked shell model with continuum damage mechanics and cohesive element not only agree well with the impact load, but also capture the fiber, matrix debonding, and interlaminar failure of composite structure.

  10. Is it Ethnic Fractionalization or Social Exclusion, Which Affects Social Cohesion?

    PubMed

    van Staveren, Irene; Pervaiz, Zahid

    2017-01-01

    The theory about missing links of economic growth often lags behind the empirical estimations of such links. A consensus has emerged that ethnic fractionalization has a negative impact on growth, also when controlled for income inequality. Often, although implicitly, the assumed channel is social cohesion. We analyse the effect of fractionalization on social cohesion with a different inequality measure, namely a social measure of inequality: the Inclusion of Minorities Index. Our results indicate that it is social exclusion , which reduces social cohesion, rather than diversity as such . We conclude that future studies of social cohesion and its relation to growth may benefit from using measures of social exclusion next to ethnic diversity.

  11. Modeling interfacial fracture in Sierra.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brown, Arthur A.; Ohashi, Yuki; Lu, Wei-Yang

    2013-09-01

    This report summarizes computational efforts to model interfacial fracture using cohesive zone models in the SIERRA/SolidMechanics (SIERRA/SM) finite element code. Cohesive surface elements were used to model crack initiation and propagation along predefined paths. Mesh convergence was observed with SIERRA/SM for numerous geometries. As the funding for this project came from the Advanced Simulation and Computing Verification and Validation (ASC V&V) focus area, considerable effort was spent performing verification and validation. Code verification was performed to compare code predictions to analytical solutions for simple three-element simulations as well as a higher-fidelity simulation of a double-cantilever beam. Parameter identification was conductedmore » with Dakota using experimental results on asymmetric double-cantilever beam (ADCB) and end-notched-flexure (ENF) experiments conducted under Campaign-6 funding. Discretization convergence studies were also performed with respect to mesh size and time step and an optimization study was completed for mode II delamination using the ENF geometry. Throughout this verification process, numerous SIERRA/SM bugs were found and reported, all of which have been fixed, leading to over a 10-fold increase in convergence rates. Finally, mixed-mode flexure experiments were performed for validation. One of the unexplained issues encountered was material property variability for ostensibly the same composite material. Since the variability is not fully understood, it is difficult to accurately assess uncertainty when performing predictions.« less

  12. Fault lubrication during earthquakes.

    PubMed

    Di Toro, G; Han, R; Hirose, T; De Paola, N; Nielsen, S; Mizoguchi, K; Ferri, F; Cocco, M; Shimamoto, T

    2011-03-24

    The determination of rock friction at seismic slip rates (about 1 m s(-1)) is of paramount importance in earthquake mechanics, as fault friction controls the stress drop, the mechanical work and the frictional heat generated during slip. Given the difficulty in determining friction by seismological methods, elucidating constraints are derived from experimental studies. Here we review a large set of published and unpublished experiments (∼300) performed in rotary shear apparatus at slip rates of 0.1-2.6 m s(-1). The experiments indicate a significant decrease in friction (of up to one order of magnitude), which we term fault lubrication, both for cohesive (silicate-built, quartz-built and carbonate-built) rocks and non-cohesive rocks (clay-rich, anhydrite, gypsum and dolomite gouges) typical of crustal seismogenic sources. The available mechanical work and the associated temperature rise in the slipping zone trigger a number of physicochemical processes (gelification, decarbonation and dehydration reactions, melting and so on) whose products are responsible for fault lubrication. The similarity between (1) experimental and natural fault products and (2) mechanical work measures resulting from these laboratory experiments and seismological estimates suggests that it is reasonable to extrapolate experimental data to conditions typical of earthquake nucleation depths (7-15 km). It seems that faults are lubricated during earthquakes, irrespective of the fault rock composition and of the specific weakening mechanism involved.

  13. Social embeddedness as a mechanism for linking social cohesion to well-being among older adults: moderating effect of gender

    PubMed Central

    Momtaz, Yadollah Abolfathi; Haron, Sharifah Azizah; Ibrahim, Rahimah; Hamid, Tengku Aizan

    2014-01-01

    Background The positive effect of social cohesion on well-being in older adults has been well documented. However, relatively few studies have attempted to understand the mechanisms by which social cohesion influences well-being. The main aim of the current study is to identify social pathways in which social cohesion may contribute to well-being. Methods The data for this study (taken from 1,880 older adults, aged 60 years and older) were drawn from a national survey conducted during 2008–2009. The survey employed a two-stage stratified sampling process for data collection. Structural equation modeling was used to test mediating and moderating analyses. Results The proposed model documented a good fit to the data (GFI =98; CFI =0.99; RMSEA =0.04). The findings from bootstrap analysis and the Sobel test revealed that the impact of social cohesion on well-being is significantly mediated by social embeddedness (Z=5.62; P<0.001). Finally, the results of a multigroup analysis test showed that social cohesion influences well-being through the social embeddedness mechanism somewhat differently for older men than women. Conclusion The findings of this study, in addition to supporting the importance of neighborhood social cohesion for the well-being of older adults, also provide evidence that the impact of social cohesion towards well-being is mediated through the mechanism of social embeddedness. PMID:24904206

  14. Social embeddedness as a mechanism for linking social cohesion to well-being among older adults: moderating effect of gender.

    PubMed

    Momtaz, Yadollah Abolfathi; Haron, Sharifah Azizah; Ibrahim, Rahimah; Hamid, Tengku Aizan

    2014-01-01

    The positive effect of social cohesion on well-being in older adults has been well documented. However, relatively few studies have attempted to understand the mechanisms by which social cohesion influences well-being. The main aim of the current study is to identify social pathways in which social cohesion may contribute to well-being. The data for this study (taken from 1,880 older adults, aged 60 years and older) were drawn from a national survey conducted during 2008-2009. The survey employed a two-stage stratified sampling process for data collection. Structural equation modeling was used to test mediating and moderating analyses. The proposed model documented a good fit to the data (GFI =98; CFI =0.99; RMSEA =0.04). The findings from bootstrap analysis and the Sobel test revealed that the impact of social cohesion on well-being is significantly mediated by social embeddedness (Z=5.62; P<0.001). Finally, the results of a multigroup analysis test showed that social cohesion influences well-being through the social embeddedness mechanism somewhat differently for older men than women. The findings of this study, in addition to supporting the importance of neighborhood social cohesion for the well-being of older adults, also provide evidence that the impact of social cohesion towards well-being is mediated through the mechanism of social embeddedness.

  15. Winnowing and Flocculation in Bio-physical Cohesive Substrate: A Flume Experimental and Estuarine Study

    NASA Astrophysics Data System (ADS)

    Ye, L.; Parsons, D. R.; Manning, A. J.

    2016-12-01

    Cohesive sediment, or mud, is ubiquitously found in most aqueous environments, such as coasts and estuaries. The study of cohesive sediment behaviors requires the synchronous description of mutual interactions of grains (e.g., winnowing and flocculation), their physical properties (e.g., grain size) and also the ambient water. Herein, a series of flume experiments (14 runs) with different substrate mixtures of sand-clay-EPS (Extracellular Polymeric Substrates: secreted by aquatic microorganisms) are combined with an estuarine field survey (Dee estuary, NW England) to investigate the behavior of suspensions over bio-physical cohesive substrates. The experimental results indicate that winnowing and flocculation occur pervasively in bio-physical cohesive flow systems. Importantly however, the evolution of the bed and bedform dynamics and hence turbulence production can be lower when cohesivity is high. The estuarine survey also revealed that the bio-physical cohesion provided by both the clay and microorganism fractions in the bed, that pervasively exists in many natural estuarine systems, plays a significant role in controlling the interactions between bed substrate and sediment suspension and deposition, including controlling processes such as sediment winnowing, flocculation and re-deposition. Full understanding of these processes are essential in advancing sediment transport modelling and prediction studies across natural estuarine systems and the work will report on an improved conceptual model for sediment sorting deposition in bio-physical cohesive substrates.

  16. Family cohesion and posttraumatic intrusion and avoidance among war veterans: a 20-year longitudinal study.

    PubMed

    Zerach, Gadi; Solomon, Zahava; Horesh, Danny; Ein-Dor, Tsachi

    2013-02-01

    The bi-directional relationships between combat-induced posttraumatic symptoms and family relations are yet to be understood. The present study assesses the longitudinal interrelationship of posttraumatic intrusion and avoidance and family cohesion among 208 Israeli combat veterans from the 1982 Lebanon War. Two groups of veterans were assessed with self-report questionnaires 1, 3 and 20 years after the war: a combat stress reaction (CSR) group and a matched non-CSR control group. Latent Trajectories Modeling showed that veterans of the CSR group reported higher intrusion and avoidance than non-CSR veterans at all three points of time. With time, there was a decline in these symptoms in both groups, but the decline was more salient among the CSR group. The latter also reported lower levels of family cohesion. Furthermore, an incline in family cohesion levels was found in both groups over the years. Most importantly, Autoregressive Cross-Lagged Modeling among CSR and non-CSR veterans revealed that CSR veterans' posttraumatic symptoms in 1983 predicted lower family cohesion in 1985, and lower family cohesion, in turn, predicted posttraumatic symptoms in 2002. The findings suggest that psychological breakdown on the battlefield is a marker for future family cohesion difficulties. Our results lend further support for the bi-directional mutual effects of posttraumatic symptoms and family cohesion over time.

  17. Symptom fluctuations, self-esteem, and cohesion during group cognitive behaviour therapy for early psychosis.

    PubMed

    Lecomte, Tania; Leclerc, Claude; Wykes, Til

    2018-03-01

    Group cohesion has been linked to positive changes in self-esteem and in symptoms during group psychotherapy in people with psychosis. These changes may be linked to changes in symptoms as fluctuations in self-esteem have been linked to symptom fluctuations. We aimed to determine the relationship between these three factors - group cohesion, self-esteem, and symptoms - during group cognitive behaviour therapy for psychosis (GCBTp). We hypothesized that group cohesion would precede changes in symptoms and self-esteem and that improvements in self-esteem would precede improvements in symptoms. This is an uncontrolled longitudinal study recruiting from a convenience sample within two early psychosis clinics. Sixty-six individuals from first episode of psychosis treatment programmes participated in this study and received 24 sessions of a validated GCBTp protocol. Participants answered a brief questionnaire at the end of each session, measuring their group cohesion, self-esteem, and perception of their symptoms as worse, same, or better than usual. Orthogonal polynomial contrasts for time effects were estimated with a mixed model for repeated measures with a random cluster effect and revealed a quartic trend regarding changes in symptoms over the 24 sessions. Self-esteem, symptoms, and group cohesion were strongly linked during a given session. Also, self-esteem changes predicted changes in symptoms up to two sessions later, and symptoms changes predicted self-esteem changes at the next session. Group cohesion preceded improvements in both self-esteem and symptoms; self-esteem also predicted improvements in group cohesion. These results suggest that self-esteem and symptoms influence each other during therapy, with improvements in one leading to improvements in the other. Group cohesion also appears to be an essential prerequisite to positive changes in self-esteem and symptoms during GCBTp. This study emphasizes the interrelation between self-esteem improvements and symptom improvements, with improvements in one leading to improvements in the other, during group CBT for psychosis. Group cohesion, in this study, is a predictor of self-esteem and symptom improvements, suggesting that a special attention should be given to developing a strong alliance and group cohesion early on during CBT for psychosis. © 2017 The British Psychological Society.

  18. The association of individual and neighborhood social cohesion, stressors, and crime on smoking status among African-American women in southeastern US subsidized housing neighborhoods.

    PubMed

    Andrews, Jeannette O; Mueller, Martina; Newman, Susan D; Magwood, Gayenell; Ahluwalia, Jasjit S; White, Kellee; Tingen, Martha S

    2014-12-01

    The purpose of this study was to examine the associations between individual and neighborhood social contextual factors and smoking prevalence among African-American women in subsidized neighborhoods. We randomly sampled 663 adult women in 17 subsidized neighborhoods in two Southeastern US states. The smoking prevalence among participants was 37.6%, with an estimated neighborhood household prevalence ranging from 30 to 68%. Smokers were more likely to be older, have lower incomes, have lower BMI, and live with other smokers. Women with high social cohesion were less likely to smoke, although living in neighborhoods with higher social cohesion was not associated with smoking prevalence. Women with higher social cohesion were more likely to be older and had lived in the neighborhood longer. Women with high stress (related to violence and disorder) and who lived in neighborhoods with higher stress were more likely to smoke. Younger women were more likely to have higher stress than older women. There were no statistically significant associations with objective neighborhood crime data in any model. This is the first study to examine both individual and neighborhood social contextual correlates among African-American women in subsidized neighborhoods. This study extends findings about smoking behaviors and neighborhood social contexts in this high-risk, urban population. Future research is needed to explore age and residential stability differences and perceptions of social cohesion, neighborhood disorder, and perceived violence in subsidized housing. Further research is also warranted on African-American women, subsidized housing, smoking, social context, health disparities' effective strategies to address these individual and contextual factors to better inform future ecological-based multilevel prevention, and cessation intervention strategies.

  19. Scour in cohesive soils

    DOT National Transportation Integrated Search

    2015-05-01

    This study of scour in cohesive soils had two objectives. The first was to introduce and demonstrate a new ex situ erosion testing device (ESTD) that can mimic the near-bed flow of open channels to erode cohesive soils within a specified range of she...

  20. Treatment Techniques and Outcomes in Multidimensional Family Therapy for Adolescent Behavior Problems

    PubMed Central

    Hogue, Aaron; Dauber, Sarah; Samuolis, Jessica; Liddle, Howard A.

    2010-01-01

    The link between treatment techniques and long-term treatment outcome was examined in an empirically supported family-based treatment for adolescent drug abuse. Observational ratings of therapist interventions were used to predict outcomes at 6 and 12 months posttreatment for 63 families receiving multidimensional family therapy. Greater use of in-session family-focused techniques predicted reduction in internalizing symptoms and improvement in family cohesion. Greater use of family-focused techniques also predicted reduced externalizing symptoms and family conflict, but only when adolescent focus was also high. In addition, greater use of adolescent-focused techniques predicted improvement in family cohesion and family conflict. Results suggest that both individual and multiperson interventions can exert an influential role in family-based therapy for clinically referred adolescents. PMID:17176187

  1. Factors associated with low unit cohesion in Australian Defence Force members who deployed to the Middle East (2001–2009)

    PubMed Central

    Kanesarajah, Jeeva; Waller, M; Zheng, W Y; Dobson, A J

    2016-01-01

    Introduction Unit cohesion has been shown to bolster the mental health of military personnel; hence, it is important to identify the characteristics that are associated with low unit cohesion, so that interventions to improve unit cohesion can be targeted and implemented. Little is known about the factors associated with low unit cohesion. This research aims to identify demographic, military service and deployment factors associated with low unit cohesion. Methods Data from a self-reported cross-sectional study of 11 411 current or ex-serving Australian military personnel deployed to Iraq or Afghanistan between 2001 and 2009 were used. Multivariable logistic regression was used to investigate the research aims. Results Being female (adjusted OR (aOR) (95% CI) 1.35 (1.21 to 1.51)), non-commissioned officer (aOR (95% CI) 1.50 (1.39 to 1.62)), lower ranked (aOR (95% CI) 1.74 (1.51 to 2.01)) or having left military service (aOR (95% CI) 1.71 (1.46 to 2.02)) was associated with reporting low unit cohesion. Potentially modifiable factors such as performing logistic roles on deployment (aOR (95% CI) 1.13 (1.01 to 1.27)), dissatisfaction with work experience on deployment such as working with colleagues who did not do what was expected of them (aOR (95% CI) 4.09 (3.61 to 4.64)), and major problems at home while deployed (aOR (95% CI) 1.50 (1.38 to 1.63)) were also associated with reporting low unit cohesion. Conclusions This is the first study to identify demographic, military service and deployment factors associated with low unit cohesion. The modifiable nature of unit cohesion means that military leaders could use this information to identify subgroups for targeted resilience interventions that may reduce vulnerabilities to mental health problems and improve the job satisfaction, preparedness and deployment experiences of serving members. PMID:26567321

  2. 75 FR 2523 - Office of Innovation and Improvement; Overview Information; Arts in Education Model Development...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-15

    ... that is based on rigorous scientifically based research methods to assess the effectiveness of a...) Relies on measurements or observational methods that provide reliable and valid data across evaluators... of innovative, cohesive models that are based on research and have demonstrated that they effectively...

  3. Individual and family strengths: an examination of the relation to disease management and metabolic control in youth with type 1 diabetes.

    PubMed

    Mackey, Eleanor Race; Hilliard, Marisa E; Berger, Sarah Shafer; Streisand, Randi; Chen, Rusan; Holmes, Clarissa

    2011-12-01

    We examined the association of youths' positive qualities, family cohesion, disease management, and metabolic control in Type 1 diabetes. Two-hundred fifty-seven youth-parent dyads completed the Family Cohesion subscale of the Family Environment Scale, the Diabetes Behavior Rating Scale, 24-hour diabetes interview, and youth completed the Positive Qualities subscale of the Youth Self Report (YSR-PQ). Structural equation modeling demonstrated that YSR-PQ scores were associated with metabolic control mediated by associations with more family cohesion and better disease management. That is, youth with higher YSR-PQ scores had more cohesive families, better disease management, and, indirectly, better metabolic control. Family cohesion was indirectly associated with better metabolic control mediated by its association with better disease management, but not mediated by its association with YSR-PQ scores. Youth who reported more positive qualities, as measured by the YSR-PQ subscale, had better disease management and metabolic control through the association with more family cohesion. However, the current results did not support an alternative hypothesis that cohesive families display better diabetes management mediated by higher YSR-PQ scores.

  4. Analysis of Cohesion and Collective Efficacy Profiles for the Performance of Soccer Players

    PubMed Central

    Leo, Francisco M.; Sánchez-Miguel, Pedro A.; Sánchez-Oliva, David; Amado, Diana; García-Calvo, Tomás

    2013-01-01

    The principal aims of the study were to define different profiles of cohesion and perceived efficacy in soccer players and to measure their differences in performance. The subjects were 235 soccer players in the under-18 category who played in the National League in Spain and 15 coaches whose ages ranged from 29 to 45 years. Diverse instruments to assess cohesion, perceived efficacy, and expectations of success were used in the study. Moreover, we measured playing time and performance. The results of the study proved the existence of four cohesion and efficacy profiles that presented significant differences in expectations of success, playing time, and performance. Furthermore, significant differences were found in the distribution of players in the teams as a function of performance. The main conclusion of this study is that soccer players with higher cohesion and collective efficacy levels belonged to teams that completed the season at the top-level classification. In contrast, athletes with low cohesion and collective efficacy usually played in unsuccessful teams. Coaches and sports psychologists are encouraged to promote both social and task cohesion and collective efficacy to enhance team performance. PMID:24511358

  5. Assessing the impact of vulnerability on perceptions of social cohesion in the context of community resilience to disaster in the Blue Mountains.

    PubMed

    Redshaw, Sarah; Ingham, Valerie; McCutcheon, Marion; Hicks, John; Burmeister, Oliver

    2018-02-01

    To assess the impact of network communications, community participation and elements of vulnerability on the perception of social cohesiveness in the Blue Mountains local government area (Blue Mountains LGA). A questionnaire was administered to residents of the Blue Mountains LGA. Econometric analysis of the resulting data was undertaken. Blue Mountains LGA, Australia. One thousand one hundred and three residents of the Blue Mountains LGA responded to the questionnaire. The responses enabled the construction of variables measuring individual perceptions of community cohesiveness, their network communications and community participation. Demographic data and data on the vulnerabilities of individuals were also collected. The data were used in an econometric model which identified that network communications and community participation impacted positively on perceptions of social cohesiveness while vulnerability factors had a negative impact. Remedial action to build community cohesiveness and network communications can be expected to have a positive impact on social cohesiveness. In developing strategies to build community cohesiveness and network communication, particular care needs to be taken to ensure the inclusion of those members of society who are regarded as the most vulnerable. © 2017 National Rural Health Alliance Inc.

  6. Team Cohesion, Player Attitude, and Performance Expectations in Simulation.

    ERIC Educational Resources Information Center

    Wellington, William J.; Faria, A. J.

    1996-01-01

    Examines the relationship of team cohesion, participant attitude, and performance expectations to actual performance results in a simulation competition. Findings indicate a strong relationship between beginning team cohesion and performance expectations and final game performance, but little relationship between beginning participant attitudes…

  7. Of Blue Badges and Purple Cloth, the Impact of Battle Death in a Cohesive Unit

    DTIC Science & Technology

    1988-12-18

    the small-unit level. History shows that the key to understanding the problem of death in a cohesive unit is that the danger of being killed or...cohesion and motivation are rooted in intensely personal attachments at the small-unit level. History shows that the key to understanding the problem of...without fear of mortal peril." (8) In this one sentence he shows his awareness of the necessity for leadership and cohesiveness in the face of death

  8. Incorporation of experimentally derived friction laws in numerical simulations of earthquake generated tsunamis

    NASA Astrophysics Data System (ADS)

    Murphy, Shane; Spagnuolo, Elena; Lorito, Stefano; Di Toro, Giulio; Scala, Antonio; Festa, Gaetano; Nielsen, Stefan; Piatanesi, Alessio; Romano, Fabrizio; Aretusini, Stefano

    2016-04-01

    Seismological, tsunami and geodetic observations have shown that subduction zones are complex systems where the properties of earthquake rupture vary with depth. For example nucleation and high frequency radiation generally occur at depth but low frequency radiation and large tsunami-genic slip appear to occur in the shallow crustal depth. Numerical simulations used to describe these features predominantly use standardised theoretical equations or experimental observations often assuming that their validity extends to all slip-rates, lithologies and tectonic environments. However recent rotary-shear experiments performed on a range of diverse materials and experimental conditions highlighted the large variability of the evolution of friction during slipping pointing to a more complex relationship between material type, slip rate and normal stress. Simulating dynamic rupture using a 2D spectral element methodology on a Tohoku like fault, we apply experimentally derived friction laws (i.e. thermal slip distance friction law, Di Toro et al. 2011) Choice of parameters for the friction law are based on expected material type (e.g. cohesive and non-cohesive clay rich material representative of an accretionary wedge), the normal stress which is controlled by the interaction between the regional stress field and the fault geometry. The shear stress distribution on the fault plane is fractal with the yield stress dependent on the static coefficient of friction and the normal stress, parameters that are dependent on the material type and geometry. We use metrics such as the slip distribution, ground motion and fracture energy to explore the effect of frictional behaviour, fault geometry and stress perturbations and its potential role in tsunami generation. Preliminary results will be presented. This research is funded by the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 603839 (Project ASTARTE - Assessment, Strategy and Risk Reduction for Tsunamis in Europe) and by the ERC CoG NOFEAR project 614705

  9. Modeling the biomechanical and injury response of human liver parenchyma under tensile loading.

    PubMed

    Untaroiu, Costin D; Lu, Yuan-Chiao; Siripurapu, Sundeep K; Kemper, Andrew R

    2015-01-01

    The rapid advancement in computational power has made human finite element (FE) models one of the most efficient tools for assessing the risk of abdominal injuries in a crash event. In this study, specimen-specific FE models were employed to quantify material and failure properties of human liver parenchyma using a FE optimization approach. Uniaxial tensile tests were performed on 34 parenchyma coupon specimens prepared from two fresh human livers. Each specimen was tested to failure at one of four loading rates (0.01s(-1), 0.1s(-1), 1s(-1), and 10s(-1)) to investigate the effects of rate dependency on the biomechanical and failure response of liver parenchyma. Each test was simulated by prescribing the end displacements of specimen-specific FE models based on the corresponding test data. The parameters of a first-order Ogden material model were identified for each specimen by a FE optimization approach while simulating the pre-tear loading region. The mean material model parameters were then determined for each loading rate from the characteristic averages of the stress-strain curves, and a stochastic optimization approach was utilized to determine the standard deviations of the material model parameters. A hyperelastic material model using a tabulated formulation for rate effects showed good predictions in terms of tensile material properties of human liver parenchyma. Furthermore, the tissue tearing was numerically simulated using a cohesive zone modeling (CZM) approach. A layer of cohesive elements was added at the failure location, and the CZM parameters were identified by fitting the post-tear force-time history recorded in each test. The results show that the proposed approach is able to capture both the biomechanical and failure response, and accurately model the overall force-deflection response of liver parenchyma over a large range of tensile loadings rates. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. The impact of neighborhood violence and social cohesion on smoking behaviors among a cohort of smokers in Mexico

    PubMed Central

    Fleischer, Nancy L.; Lozano, Paula; Santillán, Edna Arillo; Shigematsu, Luz Myriam Reynales; Thrasher, James F.

    2016-01-01

    Background Recent increases in violent crime may impact a variety of health outcomes in Mexico. We examined relationships between neighborhood-level violence and smoking behaviors in a cohort of Mexican smokers from 2011–2012, and whether neighborhood-level social cohesion modified these relationships. Methods Data were analyzed from adult smokers and recent ex-smokers who participated in Waves 5–6 of the International Tobacco Control Mexico Survey. Self-reported neighborhood violence and social cohesion were asked of Wave 6 survey participants (n=2129 current and former smokers, n=150 neighborhoods). Neighborhood-level averages for violence and social cohesion (range 4–14 and 10–25, respectively) were assigned to individuals. We used generalized estimating equations to determine associations between neighborhood indicators and individual-level smoking intensity, quit behaviors, and relapse. Results Higher neighborhood violence was associated with higher smoking intensity (Risk Ratio (RR)=1.17, 95% Confidence Interval (CI) 1.02–1.33), and fewer quit attempts (RR=0.72, 95% CI 0.61–0.85). Neighborhood violence was not associated with successful quitting or relapse. Higher neighborhood social cohesion was associated with more quit attempts and more successful quitting. Neighborhood social cohesion modified the association between neighborhood violence and smoking intensity: in neighborhoods with higher social cohesion, as violence increased, smoking intensity decreased and in neighborhoods with lower social cohesion, as violence increased, so did smoking intensity. Conclusion In the context of recent increased violence in Mexico, smokers living in neighborhoods with more violence may smoke more cigarettes per day and make fewer quit attempts than their counterparts in less violent neighborhoods. Neighborhood social cohesion may buffer the impact of violence on smoking intensity. PMID:26043898

  11. Facing Sorrow as a Group Unites. Facing Sorrow in a Group Divides

    PubMed Central

    Rennung, Miriam; Göritz, Anja S.

    2015-01-01

    Collective gatherings foster group cohesion through providing occasion for emotional sharing among participants. However, prior studies have failed to disentangle two processes that are involved in emotional sharing: 1) focusing shared attention on the same emotion-eliciting event and 2) actively sharing one’s experiences and disclosing one’s feelings to others. To date, it has remained untested if shared attention influences group cohesion independent of active emotional sharing. Our experiment investigated the effect of shared versus individual attention on cohesion in groups of strangers. We predicted that differences in group cohesion as called forth by shared vs. individual attention are most pronounced when experiencing highly arousing negative affect, in that the act of experiencing intensely negative affect with others buffers negative affect’s otherwise detrimental effect on group cohesion. Two-hundred sixteen participants were assembled in groups of 3 to 4 people to either watch an emotion-eliciting film simultaneously on a common screen or to watch the same emotion-eliciting film clip on a laptop in front of each group member using earphones. The film clips were chosen to elicit either highly arousing negative affect or one of three other affective states representing the other poles in Russel’s Circumplex model of affect. We examined self-reported affective and cognitive group cohesion and a behavioral measure of group cohesion. Results support our buffer-hypothesis, in that experiencing intense negative affect in unison leads to higher levels of group cohesion than experiencing this affect individually despite the group setting. The present study demonstrates that shared attention to intense negative emotional stimuli affects group cohesion independently of active emotional sharing. PMID:26335924

  12. Differences in neighborhood social cohesion and aerobic physical activity by Latino subgroup.

    PubMed

    Murillo, Rosenda; Echeverria, Sandra; Vasquez, Elizabeth

    2016-12-01

    Previous research has examined the role of neighborhood social cohesion in physical activity outcomes; however, less is known about this relationship across Latino subgroups. The purpose of our study was to examine the association between neighborhood social cohesion and aerobic leisure-time physical activity (LTPA) among Latino adults and to determine whether these associations differ by Latino subgroup. We used cross-sectional 2013-2014 National Health Interview Survey (NHIS) data on Latinos originating from 5 countries/regions (i.e., Latinos of Puerto Rican, Mexican/Mexican-American, Cuban/Cuban-American, Dominican and Central or South American origin) aged ≥18 years (n=11,126). Multivariable logistic regression models were used to estimate associations between self-reported neighborhood social cohesion and meeting aerobic LTPA guidelines. Models were adjusted for age, sex, education, and acculturation. We also investigated whether associations varied by Latino subgroup. In adjusted models for all Latino adults, compared with those reporting low social cohesion, individuals who reported high social cohesion (Odds Ratio [OR]: 1.33; 95% Confidence Interval [CI]: 1.17-1.52) were significantly more likely to meet the aerobic physical activity guideline. When stratified by Latino subgroups, among Mexican/Mexicans-Americans (OR: 1.39; 95% CI: 1.16, 1.66) and Cuban/Cuban Americans (OR: 1.73; 95% CI: 1.00, 2.97) high social cohesion was associated with meeting the aerobic activity guideline. Among Dominicans, those who reported medium social cohesion (OR: 0.52, 95% CI: 0.29, 0.93) were less likely to meet the aerobic activity guideline. When examining aerobic physical activity outcomes in the Latino population, the role of neighborhood social cohesion and the variability among Latino subgroups should be considered.

  13. Factors associated with low neighborhood cohesion among women living with HIV impacted by social-structural inequities in British Columbia.

    PubMed

    Closson, Kalysha; Palmer, Alexis K; Collins, Alexandra B; Salters, Kate; Zhang, Wendy; Montaner, Julio S G; Hogg, Robert S; Parashar, Surita

    2018-03-01

    Built and social environments, including one's perception of their environment, are important determinants of health. The intersection of gender and HIV status may complicate the role of neighborhood cohesion in safety, personal well-being, and health outcomes for populations impacted by social and structural inequities. Among women in particular, social cohesion within the neighborhood they reside in may have a greater influence on health outcomes compared to their male counterparts. We sought to examine perception of neighborhood cohesion (validated scale with a range 0-100, with higher scores indicating higher perceived neighborhood cohesion) among women living with HIV, impacted by social-structural inequities, receiving combination antiretroviral therapy, and enrolled in the Longitudinal Investigations into Supportive Ancillary health services (LISA) study in British Columbia, Canada. Cross-sectional data on neighborhood cohesion and socio-demographic data were collected in an interviewer-administered survey. Of the 1,000 LISA participants interviewed, 908 (including 249 women and 659 men) had complete data for the variables of interest. At the bivariate level, women had worse perceived neighborhood cohesion scores compared to men (median: 56 [95% CI: 44-66] vs. 60 [95% CI: 47-71]). Multivariable model results indicated that for women living with HIV in our sample, greater neighborhood cohesion scores were positively associated with stable housing (β coefficient = 7.85; 95% CI: 3.61, 12.10, p < 0.001), and negatively associated with greater perceived HIV stigma (β coefficient = -1.19; 95% CI: -2.24 to-0.15; p = 0.025). The results illustrate the gendered nature of experiencing built and social environments, and highlight the need for women-centred interventions to address the social determinants of HIV burden associated with negative perceptions of neighborhood cohesion.

  14. Validation of a brief form of the Perceived Neighborhood Social Cohesion questionnaire.

    PubMed

    Dupuis, Marc; Baggio, Stéphanie; Gmel, Gerhard

    2017-02-01

    The aim of this study was the validation of a brief form of the Perceived Neighborhood Social Cohesion questionnaire using data from 5065 men from the "Cohort Study on Substance-Use Risk Factors." A 9-item scale covering three factors was proposed. Excellent indices of internal consistency were measured (α = .93). The confirmatory factor analyses resulted in acceptable fit indices supporting measurement invariance across French and German forms. Significant correlations were found between the brief form of the Perceived Neighborhood Social Cohesion questionnaire, and satisfaction and self-reported health, providing evidence of the concurrent validity of the scale. Perceived neighborhood social cohesion, and depression and suicide attempts were negatively associated, sustaining the protective effect of perceived social cohesion.

  15. Pore fluid pressure and the seismic cycle

    NASA Astrophysics Data System (ADS)

    French, M. E.; Zhu, W.; Hirth, G.; Belzer, B.

    2017-12-01

    In the brittle crust, the critical shear stress required for fault slip decreases with increasing pore fluid pressures according to the effective stress criterion. As a result, higher pore fluid pressures are thought to promote fault slip and seismogenesis, consistent with observations that increasing fluid pressure as a result of wastewater injection is correlated with increased seismicity. On the other hand, elevated pore fluid pressure is also proposed to promote slow stable failure rather than seismicity along some fault zones, including during slow slip in subduction zones. Here we review recent experimental evidence for the roles that pore fluid pressure and the effective stress play in controlling fault slip behavior. Using two sets of experiments on serpentine fault gouge, we show that increasing fluid pressure does decrease the shear stress for reactivation under brittle conditions. However, under semi-brittle conditions as expected near the base of the seismogenic zone, high pore fluid pressures are much less effective at reducing the shear stress of reactivation even though deformation is localized and frictional. We use an additional study on serpentinite to show that cohesive fault rocks, potentially the product of healing and cementation, experience an increase in fracture energy during faulting as fluid pressures approach lithostatic, which can lead to more stable failure. Structural observations show that the increased fracture energy is associated with a greater intensity of transgranular fracturing and delocalization of deformation. Experiments on several lithologies indicate that the stabilizing effect of fluid pressure occurs independent of rock composition and hydraulic properties. Thus, high pore fluid pressures have the potential to either enhance seismicity or promote stable faulting depending on pressure, temperature, and fluid pressure conditions. Together, the results of these studies indicate that pore fluid pressure promotes seismogenesis in the brittle shallow crust where fluid pressures are elevated but sub-lithostatic and promote slow, stable failure near seismic to aseismic transitions and under near-lithostatic fluid pressures.

  16. Ensemble characterization of an intrinsically disordered FG-Nup peptide and its F>A mutant in DMSO-d6.

    PubMed

    Reid, Korey M; Sunanda, Punnepalli; Raghothama, S; Krishnan, V V

    2017-11-01

    Intrinsically disordered proteins (IDP) lack a well-defined 3D-structure under physiological conditions, yet, the inherent disorder represented by an ensemble of conformation plays a critical role in many cellular and regulatory processes. Nucleoporins, or Nups, are the proteins found in the nuclear pore complex (NPC). The central pore of the NPC is occupied by Nups, which have phenylalanine-glycine domain repeats and are intrinsically disordered, and therefore are termed FG-Nups. These FG-domain repeats exhibit differing cohesiveness character and differ from least (FG) to most (GLFG) cohesive. The designed FG-Nup is a 25 AA model peptide containing a noncohesive FG-motif flanked by two cohesive GLFG-motifs (WT peptide). Complete NMR-based ensemble characterization of this peptide along with a control peptide with an F>A substitution (MU peptide) are discussed. Ensemble characterization of the NMR-determined models suggests that both the peptides do not have consistent secondary structures and continue to be disordered. Nonetheless, the role of cohesive elements mediated by the GLFG motifs is evident in the WT ensemble of structures that are more compact than the MU peptide. The approach presented here allows an alternate way to investigate the specific roles of distinct amino acid motifs that translate into the long-range organization of the ensemble of structures and in general on the nature of IDPs. © 2017 Wiley Periodicals, Inc.

  17. Evaluation of a team-building retreat to promote nursing faculty cohesion and job satisfaction.

    PubMed

    Birx, Ellen; Lasala, Kathleen B; Wagstaff, Mark

    2011-01-01

    With the growing global shortage of nursing faculty, there is increased need to develop and evaluate strategies to promote nursing faculty job satisfaction. Using quantitative and qualitative research methods, a team-building faculty retreat including challenge course activities was evaluated to determine its effects on group cohesion and job satisfaction. Mean Job in General scores for the sample (n = 29) at the start of the study were comparable with national norms for employees with graduate degrees. There were statistically significant increases in Job in General scores and group cohesion scores from pretest to posttest on the day of the retreat. However, the positive changes were not maintained at the end of the semester when follow-up data were gathered. Content analysis of the retreat day reflections revealed the following themes: getting to know each other better, seeing commonalities and differences, spending time together, developing trust, and working as a group. Several themes were identified in the end of the semester reflections: getting to know each other, feeling closer as a group, setting a friendlier tone for the semester, and that the retreat was a positive experience. Based on these findings, we recommend the use of a faculty retreat with challenge course activities to promote nursing faculty cohesion and job satisfaction. However, follow-up activities are recommended to maintain positive results over time. 2011 Elsevier Inc. All rights reserved.

  18. Emergence of social cohesion in a model society of greedy, mobile individuals.

    PubMed

    Roca, Carlos P; Helbing, Dirk

    2011-07-12

    Human wellbeing in modern societies relies on social cohesion, which can be characterized by high levels of cooperation and a large number of social ties. Both features, however, are frequently challenged by individual self-interest. In fact, the stability of social and economic systems can suddenly break down as the recent financial crisis and outbreaks of civil wars illustrate. To understand the conditions for the emergence and robustness of social cohesion, we simulate the creation of public goods among mobile agents, assuming that behavioral changes are determined by individual satisfaction. Specifically, we study a generalized win-stay-lose-shift learning model, which is only based on previous experience and rules out greenbeard effects that would allow individuals to guess future gains. The most noteworthy aspect of this model is that it promotes cooperation in social dilemma situations despite very low information requirements and without assuming imitation, a shadow of the future, reputation effects, signaling, or punishment. We find that moderate greediness favors social cohesion by a coevolution between cooperation and spatial organization, additionally showing that those cooperation-enforcing levels of greediness can be evolutionarily selected. However, a maladaptive trend of increasing greediness, although enhancing individuals' returns in the beginning, eventually causes cooperation and social relationships to fall apart. Our model is, therefore, expected to shed light on the long-standing problem of the emergence and stability of cooperative behavior.

  19. The Role of Preceptorship and Group Cohesion on Newly Licensed Registered Nurses' Satisfaction and Intent to Stay.

    PubMed

    Bontrager, Sarah; Hart, Patricia L; Mareno, Nicole

    2016-03-01

    Thirteen percent of newly licensed registered nurses (NLRNs) vacate their first job after 1 year, and 37% report that they feel ready to change jobs. Turnover can lead to consistent and detrimental nursing shortages in nursing units, as well as increased costs for health care systems. A descriptive, prospective, cross-sectional design was used to understand how preceptor role effectiveness and group cohesion affect NLRNs' satisfaction and intent to stay. NLRNs reported high levels of perceived preceptor role effectiveness, group cohesion, and job satisfaction, with only moderate levels of intent to stay. Statistically significant relationships were found among preceptor role effectiveness, job satisfaction, and intent to stay, as well as among group cohesion, job satisfaction, and intent to stay. Preceptor role effectiveness and group cohesion are predictors of NLRNs' level of job satisfaction. Job satisfaction is a predictor of NLRNs' intent to stay. Effective preceptors and positive group cohesion are factors that are important to NLRNs' job satisfaction and intent to stay. Copyright 2016, SLACK Incorporated.

  20. Erosion properties of cohesive sediments in the Colorado River in Grand Canyon

    USGS Publications Warehouse

    Akahori, R.; Schmeeckle, M.W.; Topping, D.J.; Melis, T.S.

    2008-01-01

    Cohesive sediment deposits characterized by a high fraction of mud (silt plus clay) significantly affect the morphology and ecosystem of rivers. Potentially cohesive sediment samples were collected from deposits in the Colorado River in Marble and Grand Canyons. The erosion velocities of these samples were measured in a laboratory flume under varying boundary shear stresses. The non-dimensional boundary shear stress at which erosion commenced showed a systematic deviation from that of non-cohesive sediments at mud fractions greater than 0.2. An empirical relation for the boundary shear stress threshold of erosion as a function of mud fraction was proposed. The mass erosion rate was modelled using the Ariathurai-Partheniades equation. The erosion rate parameter of this equation was found to be a strong function of mud fraction. Under similar boundary shear stress and sediment supply conditions in the Colorado River, cohesive lateral eddy deposits formed of mud fractions in excess of 0.2 will erode less rapidly than non-cohesive deposits. Copyright ?? 2008 John Wiley & Sons, Ltd.

  1. A season-long team-building intervention: examining the effect of team goal setting on cohesion.

    PubMed

    Senécal, Julie; Loughead, Todd M; Bloom, Gordon A

    2008-04-01

    The purpose of the current study was to determine whether the implementation of a season-long team-building intervention program using team goal setting increased perceptions of cohesion. The participants were 86 female high school basketball players from 8 teams. The teams were randomly assigned to either an experimental team goal-setting or control condition. Each participant completed the Group Environment Questionnaire (GEQ; Carron, Brawley, & Widmeyer, 2002; Carron, Widmeyer, & Brawley, 1985), which assessed cohesion at both the beginning and end of the season. Overall, the results revealed a significant multivariate effect, Pillai's trace F(12, 438) = 2.68, p = .002. Post hoc analyses showed that at the beginning of the season, athletes from both conditions did not differ in their perceptions of cohesion. However, at the end of the season, athletes in the team goal-setting condition held higher perceptions of cohesion than athletes in the control condition. Overall, the results indicated that team goal setting was an effective team-building tool for influencing cohesiveness in sport teams.

  2. ROCC, a conserved region in cohesin's Mcd1 subunit, is essential for the proper regulation of the maintenance of cohesion and establishment of condensation

    PubMed Central

    Eng, Thomas; Guacci, Vincent; Koshland, Doug

    2014-01-01

    Cohesin helps orchestrate higher-order chromosome structure, thereby promoting sister chromatid cohesion, chromosome condensation, DNA repair, and transcriptional regulation. To elucidate how cohesin facilitates these diverse processes, we mutagenized Mcd1p, the kleisin regulatory subunit of budding yeast cohesin. In the linker region of Mcd1p, we identified a novel evolutionarily conserved 10–amino acid cluster, termed the regulation of cohesion and condensation (ROCC) box. We show that ROCC promotes cohesion maintenance by protecting a second activity of cohesin that is distinct from its stable binding to chromosomes. The existence of this second activity is incompatible with the simple embrace mechanism of cohesion. In addition, we show that the ROCC box is required for the establishment of condensation. We provide evidence that ROCC controls cohesion maintenance and condensation establishment through differential functional interactions with Pds5p and Wpl1p. PMID:24966169

  3. School social cohesion, student-school connectedness, and bullying in Colombian adolescents.

    PubMed

    Springer, Andrew E; Cuevas Jaramillo, Maria Clara; Ortiz Gómez, Yamileth; Case, Katie; Wilkinson, Anna

    2016-12-01

    Student-school connectedness is inversely associated with multiple health risk behaviors, yet research is limited on the relative contributions of a student's connectedness with school and an overall context of school social cohesion to peer victimization/bullying. We examined associations of perceived school cohesion and student-school connectedness with physical victimization, verbal victimization, and social exclusion in the past six months in adolescents in grades 6-11 (N = 774) attending 11 public and private urban schools in Colombia. Cross-sectional data were collected via a self-administered questionnaire and analyzed using mixed-effects linear regression models. Higher perceived school cohesion was inversely related with exposure to three bullying types examined (p < 0.05); student-school connectedness was negatively related to verbal victimization among girls only (p < 0.01). In full models, school cohesion maintained inverse associations with three bullying types after controlling for student-school connectedness (p ≤ 0.05). Enhancing school cohesion may hold benefits for bullying prevention beyond a student's individual school connectedness. © The Author(s) 2015.

  4. Acculturative Stress and Diminishing Family Cohesion Among Recent Latino Immigrants

    PubMed Central

    De La Rosa, Mario; Ibañez, Gladys E.

    2012-01-01

    This study investigates a theorized link between Latino immigrants’ experience of acculturative stress during their two initial years in the United States (US) and declines in family cohesion from pre- to post-immigration contexts. This retrospective cohort study included 405 adult participants. Baseline assessment occurred during participants’ first 12 months in the US. Follow-up assessment occurred during participants’ second year in the US. General linear mixed models were used to estimate change in family cohesion and sociocultural correlates of this change. Inverse associations were determined between acculturative stress during initial years in the US and declines in family cohesion from pre-immigration to post-immigration contexts. Participants with undocumented immigration status, those with lower education levels, and those without family in the US generally indicated lower family cohesion. Participants who experienced more acculturative stress and those without family in the US evidenced a greater decline in family cohesion. Results are promising in terms of implications for health services for recent Latino immigrants. PMID:22790880

  5. Estimation of Enthalpy of Formation of Liquid Transition Metal Alloys: A Modified Prescription Based on Macroscopic Atom Model of Cohesion

    NASA Astrophysics Data System (ADS)

    Raju, Subramanian; Saibaba, Saroja

    2016-09-01

    The enthalpy of formation Δo H f is an important thermodynamic quantity, which sheds significant light on fundamental cohesive and structural characteristics of an alloy. However, being a difficult one to determine accurately through experiments, simple estimation procedures are often desirable. In the present study, a modified prescription for estimating Δo H f L of liquid transition metal alloys is outlined, based on the Macroscopic Atom Model of cohesion. This prescription relies on self-consistent estimation of liquid-specific model parameters, namely electronegativity ( ϕ L) and bonding electron density ( n b L ). Such unique identification is made through the use of well-established relationships connecting surface tension, compressibility, and molar volume of a metallic liquid with bonding charge density. The electronegativity is obtained through a consistent linear scaling procedure. The preliminary set of values for ϕ L and n b L , together with other auxiliary model parameters, is subsequently optimized to obtain a good numerical agreement between calculated and experimental values of Δo H f L for sixty liquid transition metal alloys. It is found that, with few exceptions, the use of liquid-specific model parameters in Macroscopic Atom Model yields a physically consistent methodology for reliable estimation of mixing enthalpies of liquid alloys.

  6. The variability of root cohesion as an influence on shallow landslide susceptibility in the Oregon Coast Range

    USGS Publications Warehouse

    Schmidt, K.M.; Roering, J.J.; Stock, J.D.; Dietrich, W.E.; Montgomery, D.R.; Schaub, T.

    2001-01-01

    Decades of quantitative measurement indicate that roots can mechanically reinforce shallow soils in forested landscapes. Forests, however, have variations in vegetation species and age which can dominate the local stability of landslide-initiation sites. To assess the influence of this variability on root cohesion we examined scarps of landslides triggered during large storms in February and November of 1996 in the Oregon Coast Range and hand-dug soil pits on stable ground. At 41 sites we estimated the cohesive reinforcement to soil due to roots by determining the tensile strength, species, depth, orientation, relative health, and the density of roots ???1 mm in diameter within a measured soil area. We found that median lateral root cohesion ranges from 6.8-23.2 kPa in industrial forests with significant understory and deciduous vegetation to 25.6-94.3 kPa in natural forests dominated by coniferous vegetation. Lateral root cohesion in clearcuts is uniformly ???10 kPa. Some 100-year-old industrial forests have species compositions, lateral root cohesion, and root diameters that more closely resemble 10-year-old clearcuts than natural forests. As such, the influence of root cohesion variability on landslide susceptibility cannot be determined solely from broad age classifications or extrapolated from the presence of one species of vegetation. Furthermore, the anthropogenic disturbance legacy modifies root cohesion for at least a century and should be considered when comparing contemporary landslide rates from industrial forests with geologic background rates.

  7. Sisters Unbound Is Required for Meiotic Centromeric Cohesion in Drosophila melanogaster

    PubMed Central

    Krishnan, Badri; Thomas, Sharon E.; Yan, Rihui; Yamada, Hirotsugu; Zhulin, Igor B.; McKee, Bruce D.

    2014-01-01

    Regular meiotic chromosome segregation requires sister centromeres to mono-orient (orient to the same pole) during the first meiotic division (meiosis I) when homologous chromosomes segregate, and to bi-orient (orient to opposite poles) during the second meiotic division (meiosis II) when sister chromatids segregate. Both orientation patterns require cohesion between sister centromeres, which is established during meiotic DNA replication and persists until anaphase of meiosis II. Meiotic cohesion is mediated by a conserved four-protein complex called cohesin that includes two structural maintenance of chromosomes (SMC) subunits (SMC1 and SMC3) and two non-SMC subunits. In Drosophila melanogaster, however, the meiotic cohesion apparatus has not been fully characterized and the non-SMC subunits have not been identified. We have identified a novel Drosophila gene called sisters unbound (sunn), which is required for stable sister chromatid cohesion throughout meiosis. sunn mutations disrupt centromere cohesion during prophase I and cause high frequencies of non-disjunction (NDJ) at both meiotic divisions in both sexes. SUNN co-localizes at centromeres with the cohesion proteins SMC1 and SOLO in both sexes and is necessary for the recruitment of both proteins to centromeres. Although SUNN lacks sequence homology to cohesins, bioinformatic analysis indicates that SUNN may be a structural homolog of the non-SMC cohesin subunit stromalin (SA), suggesting that SUNN may serve as a meiosis-specific cohesin subunit. In conclusion, our data show that SUNN is an essential meiosis-specific Drosophila cohesion protein. PMID:25194162

  8. Micromechanical cohesion force between gas hydrate particles measured under high pressure and low temperature conditions.

    PubMed

    Lee, Bo Ram; Sum, Amadeu K

    2015-04-07

    To prevent hydrate plugging conditions in the transportation of oil/gas in multiphase flowlines, one of the key processes to control is the agglomeration/deposition of hydrate particles, which are determined by the cohesive/adhesive forces. Previous studies reporting measurements of the cohesive/adhesive force between hydrate particles used cyclopentane hydrate particles in a low-pressure micromechanical force apparatus. In this study, we report the cohesive forces of particles measured in a new high-pressure micromechanical force (MMF) apparatus for ice particles, mixed (methane/ethane, 74.7:25.3) hydrate particles (Structure II), and carbon dioxide hydrate particles (Structure I). The cohesive forces are measured as a function of the contact time, contact force, temperature, and pressure, and determined from pull-off measurements. For the measurements performed of the gas hydrate particles in the gas phase, the determined cohesive force is about 30-35 mN/m, about 8 times higher than the cohesive force of CyC5 hydrates in the liquid CyC5, which is about 4.3 mN/m. We show from our results that the hydrate structure (sI with CO2 hydrates and sII with CH4/C2H6 hydrates) has no influence on the cohesive force. These results are important in the deposition of a gas-dominated system, where the hydrate particles formed in the liquid phase can then stick to the hydrate deposited in the wall exposed to the gas phase.

  9. Guide to cement-based integrated pavement solutions.

    DOT National Transportation Integrated Search

    2011-08-01

    This guide provides a clear, concise, and cohesive presentation of cement-bound materials options for 10 : specific engineering pavement applications: new concrete pavements, concrete overlays, pervious concrete, : precast pavements, roller-compacted...

  10. Ultimate pier and contraction scour prediction in cohesive soils at selected bridges in Illinois.

    DOT National Transportation Integrated Search

    2013-09-01

    The Scour Rate In COhesive Soils-Erosion Function Apparatus (SRICOS-EFA) method includes an ultimate scour prediction that is : the equilibrium maximum pier and contraction scour of cohesive soils over time. The purpose of this report is to present t...

  11. Community Cohesion: A Report of the Independent Review Team.

    ERIC Educational Resources Information Center

    Home Office, London (England).

    This study examined the views of English citizens and community leaders regarding problems related to disaffected, disadvantaged, culturally diverse groups. The Community Cohesion Review Team (CCRT) investigated issues needing to be addressed to bring about social cohesion. Communities were deeply polarized, with separate educational systems,…

  12. Social Cohesion and Voluntary Associations

    ERIC Educational Resources Information Center

    Heuser, Brian L.

    2005-01-01

    Voluntary organizations exert great influence over how social norms and ethical codes are guided into action. As such, they have a significant impact on societal levels of social cohesion. Although social capital involves generalized trust becoming manifest as spontaneous sociability, social cohesion is determined by how that sociability is…

  13. Women in Combat: What Next?

    DTIC Science & Technology

    1992-06-16

    other things, they must consider deployment issues, coalition partners, pregnancy, unit cohesion, strength issues, sexual harassment and fraternization...Among other things, they must consider deployment issues, coalition partners, pregnancy, unit cohesion, strength issues. sexual harassment and...11 Deployment Issues - Pregnancy/Absenteeism ... ...... 12 Unit Cohesion and Bonding .... .............. ... 14 Sexual Harassment

  14. Influence of Sport Education on Group Cohesion in University Physical Education

    ERIC Educational Resources Information Center

    Jenkins, Jayne M.; Alderman, Brandon L.

    2011-01-01

    The Sport Education ("SE") curricular model incorporated within university physical education Basic Instruction Program (BIP) may increase group cohesion. This study's purpose was to identify student perceptions of a BIP course taught within "SE," and investigate group cohesion in differing activity content. Participants…

  15. Failure processes in soft and quasi-brittle materials with nonhomogeneous microstructures

    NASA Astrophysics Data System (ADS)

    Spring, Daniel W.

    Material failure pervades the fields of materials science and engineering; it occurs at various scales and in various contexts. Understanding the mechanisms by which a material fails can lead to advancements in the way we design and build the world around us. For example, in structural engineering, understanding the fracture of concrete and steel can lead to improved structural systems and safer designs; in geological engineering, understanding the fracture of rock can lead to increased efficiency in oil and gas extraction; and in biological engineering, understanding the fracture of bone can lead to improvements in the design of bio-composites and medical implants. In this thesis, we numerically investigate a wide spectrum of failure behavior; in soft and quasi-brittle materials with nonhomogeneous microstructures considering a statistical distribution of material properties. The first topic we investigate considers the influence of interfacial interactions on the macroscopic constitutive response of particle reinforced elastomers. When a particle is embedded into an elastomer, the polymer chains in the elastomer tend to adsorb (or anchor) onto the surface of the particle; creating a region in the vicinity of each particle (often referred to as an interphase) with distinct properties from those in the bulk elastomer. This interphasial region has been known to exist for many decades, but is primarily omitted in computational investigations of such composites. In this thesis, we present an investigation into the influence of interphases on the macroscopic constitutive response of particle filled elastomers undergoing large deformations. In addition, at large deformations, a localized region of failure tends to accumulate around inclusions. To capture this localized region of failure (often referred to as interfacial debonding), we use cohesive zone elements which follow the Park-Paulino-Roesler traction-separation relation. To account for friction, we present a new, coupled cohesive-friction relation and detail its formulation and implementation. In the process of this investigation, we developed a small library of cohesive elements for use with a commercially available finite element analysis software package. Additionally, in this thesis, we present a series of methods for reducing mesh dependency in two-dimensional dynamic cohesive fracture simulations of quasi-brittle materials. In this setting, cracks are only permitted to propagate along element facets, thus a poorly designed discretization of the problem domain can introduce artifacts into the fracture behavior. To reduce mesh induced artifacts, we consider unstructured polygonal finite elements. A randomly-seeded polygonal mesh leads to an isotropic discretization of the problem domain, which does not bias the direction of crack propagation. However, polygonal meshes tend to limit the possible directions a crack may travel at each node, making this discretization a poor candidate for dynamic cohesive fracture simulations. To alleviate this problem, we propose two new topological operators. The first operator we propose is adaptive element-splitting, and the second is adaptive mesh refinement. Both operators are designed to improve the ability of unstructured polygonal meshes to capture crack patterns in dynamic cohesive fracture simulations. However, we demonstrate that element-splitting is more suited to pervasive fracture problems, whereas, adaptive refinement is more suited to problems exhibiting a dominant crack. Finally, we investigate the use of geometric and constitutive design features to regularize pervasive fragmentation behavior in three-dimensions. Throughout pervasive fracture simulations, many cracks initiate, propagate, branch and coalesce simultaneously. Because of the cohesive element method's unique framework, this behavior can be captured in a regularized manner. In this investigation, unstructuring techniques are used to introduce randomness into a numerical model. The behavior of quasi-brittle materials undergoing pervasive fracture and fragmentation is then examined using three examples. The examples are selected to investigate some of the significant factors influencing pervasive fracture and fragmentation behavior; including, geometric features, loading conditions, and material gradation.

  16. Group Cohesiveness in the Industrial Work Group.

    ERIC Educational Resources Information Center

    Seashore, Stanley E.

    Originally published in 1954, this investigation was designed to explore the formation of cohesiveness within work groups in an industrial setting, and the relationship of cohesiveness to productivity and to group members' mental health and adjustment. A company wide questionnaire survey, involving 228 groups totaling 5,871 workers, was made of…

  17. A Reappraisal of Lexical Cohesion in Conversational Discourse

    ERIC Educational Resources Information Center

    Gomez Gonzalez, Maria De Los Angeles

    2013-01-01

    Cohesion, or the connectedness of discourse, has been recognized as playing a crucial role in both language production and comprehension processes. Researchers have debated about the "right" number and classification of cohesive devices, as well as about their interaction with coherence and/or genre. The present study proposes an integrative model…

  18. Cohesion and Coherence in Theory and Reading Research.

    ERIC Educational Resources Information Center

    Fulcher, Glenn

    1989-01-01

    Examines the conflict between applied linguistics and schema theoreticians over the relationship between the concepts of cohesion and coherence. Suggests that the positions taken are the result of theoretically different starting points. Reports the results of two studies that support the theory accounting for cohesion and coherence. (RS)

  19. Cohesion Features in ESL Reading: Comparing Beginning, Intermediate and Advanced Textbooks

    ERIC Educational Resources Information Center

    Plakans, Lia; Bilki, Zeynep

    2016-01-01

    This study of English as a second language (ESL) reading textbooks investigates cohesion in reading passages from 27 textbooks. The guiding research questions were whether and how cohesion differs across textbooks written for beginning, intermediate, and advanced second language readers. Using a computational tool called Coh-Metrix, textual…

  20. Academic Social Cohesion within Higher Education

    ERIC Educational Resources Information Center

    Heuser, Brian L.

    2007-01-01

    This article explores the theoretical foundations of "social cohesion" as it relates to higher education institutions. In so doing it seeks (a) to understand the core elements of social cohesion--social capital, human capital and ethical behavioral norms that serve a common good--and (b) to establish a flexible framework for understanding the…

  1. Religious Communities, Immigration, and Social Cohesion in Rural Areas: Evidence from England

    ERIC Educational Resources Information Center

    Andrews, Rhys

    2011-01-01

    Religious communities are important sources of bridging and bonding social capital that have varying implications for perceptions of social cohesion in rural areas. In particular, as well as cultivating cohesiveness more broadly, the bridging social capital associated within mainline religious communities may represent an especially important…

  2. Family Cohesion in the Lives of Mexican American and European American Parents

    ERIC Educational Resources Information Center

    Behnke, Andrew O.; MacDermid, Shelley M.; Coltrane, Scott L.; Parke, Ross D.; Duffy, Sharon; Widaman, Keith F.

    2008-01-01

    This study investigated similarities and differences in relations between stress and parenting behaviors for 509 Mexican American and European American fathers and mothers in Southern California. Our model posited that family cohesion mediates the relation between stressors and parenting behavior, and we found that family cohesion strongly…

  3. Effective particle sizes of cohesive sediment in north Mississippi streams

    USDA-ARS?s Scientific Manuscript database

    Knowledge of the size of cohesive sediment particles transported in streams is important information for predicting how the sediment and contaminants the sediment may be carrying will be transported by the flow. Cohesive sediments (less than 0.062 mm in diameter) generally are not transported in th...

  4. Natural disasters and indicators of social cohesion.

    PubMed

    Calo-Blanco, Aitor; Kovářík, Jaromír; Mengel, Friederike; Romero, José Gabriel

    2017-01-01

    Do adversarial environmental conditions create social cohesion? We provide new answers to this question by exploiting spatial and temporal variation in exposure to earthquakes across Chile. Using a variety of methods and controlling for a number of socio-economic variables, we find that exposure to earthquakes has a positive effect on several indicators of social cohesion. Social cohesion increases after a big earthquake and slowly erodes in periods where environmental conditions are less adverse. Our results contribute to the current debate on whether and how environmental conditions shape formal and informal institutions.

  5. Natural disasters and indicators of social cohesion

    PubMed Central

    Calo-Blanco, Aitor; Kovářík, Jaromír; Mengel, Friederike; Romero, José Gabriel

    2017-01-01

    Do adversarial environmental conditions create social cohesion? We provide new answers to this question by exploiting spatial and temporal variation in exposure to earthquakes across Chile. Using a variety of methods and controlling for a number of socio-economic variables, we find that exposure to earthquakes has a positive effect on several indicators of social cohesion. Social cohesion increases after a big earthquake and slowly erodes in periods where environmental conditions are less adverse. Our results contribute to the current debate on whether and how environmental conditions shape formal and informal institutions. PMID:28591148

  6. Self-construal, mental distress, and family relations: a mediated moderation analysis with Asian American adolescents.

    PubMed

    Liu, Freda F; Goto, Sharon G

    2007-04-01

    The interactive effects between interdependent and independent self-construal on family cohesion and mental distress were examined. Survey responses from 153 Asian American high school students supported the hypothesized moderation of interdependence by independence on family cohesion, which was found to further mediate the relationship between self-construal and mental distress. Specifically, interdependence was positively associated with family cohesion when independence was high and negatively associated with family cohesion when independence was low. Accounting for the mediator effects of family cohesion, mental distress was positively associated with interdependence and more so for those low on independence than those high on independence. The benefits of biculturalism and research implications for the bidimensional conceptualization of self-construal for ethnic minority populations are discussed. (c) 2007 APA, all rights reserved.

  7. Transformational leadership and task cohesion in sport: the mediating role of inside sacrifice.

    PubMed

    Cronin, Lorcan Donal; Arthur, Calum Alexander; Hardy, James; Callow, Nichola

    2015-02-01

    In this cross-sectional study, we examined a mediational model whereby transformational leadership is related to task cohesion via sacrifice. Participants were 381 American (Mage = 19.87 years, SD = 1.41) Division I university athletes (188 males, 193 females) who competed in a variety of sports. Participants completed measures of coach transformational leadership, personal and teammate inside sacrifice, and task cohesion. After conducting multilevel mediation analysis, we found that both personal and teammate inside sacrifice significantly mediated the relationships between transformational leadership behaviors and task cohesion. However, there were differential patterns of these relationships for male and female athletes. Interpretation of the results highlights that coaches should endeavor to display transformational leadership behaviors as they are related to personal and teammate inside sacrifices and task cohesion.

  8. Family Cohesion and its Relationship to Psychological Distress among Latino Groups

    PubMed Central

    Rivera, Fernando I.; Guarnaccia, Peter J.; Mulvaney-Day, Norah; Lin, Julia Y.; Torres, Maria; Alegria, Margarita

    2009-01-01

    This paper presents analyses of a representative sample of US Latinos (N=2540) to investigate whether family cohesion moderates the effects of cultural conflict on psychological distress. The results for the aggregated Latino group suggests a significant association between family cohesion and lower psychological distress and the combination of strong family cohesion with presence of family cultural conflict was associated with higher psychological distress. However, this association differed by Latino groups. We found no association for Puerto Ricans, Cuban results were similar to the aggregate group, family cultural conflict in Mexicans was associated with higher psychological distress, while family cohesion in Other Latinos was associated with higher psychological distress. Implications of these findings are discussed to unravel the differences in family dynamics across Latino subethnic groups. PMID:19444326

  9. Examining the relationship between family meal frequency and individual dietary intake: does family cohesion play a role?

    PubMed

    Welsh, Ericka M; French, Simone A; Wall, Melanie

    2011-01-01

    To confirm previously reported associations between family meal frequency and dietary intake, and to examine family cohesion as a potential mediator of this relationship. Cross-sectional observational study. Data collected at baseline via questionnaire. Randomized, controlled household weight gain prevention trial. Participants were 152 adults and 75 adolescents from 90 community households. Family meal frequency assessed with a single question. Perceived family cohesion measured by the Family Adaptability and Cohesion Evaluation Scale-III. Usual intake of targeted food items assessed with modified food frequency questionnaire. Hierarchical linear regression with mediation analysis. Statistical significance set at α-level .05. Family meal frequency was associated with intake of fruits and vegetables in adults, and sweets and sugar-sweetened beverages in adolescents. Family meal frequency was positively correlated with perceived family cohesion (r = 0.41, P < .01). Partial mediation by family cohesion was observed for family meal frequency and sweets intake in adolescents. Results suggest that family cohesion is not a consistent mediator of relationship between family meal frequency and individual dietary intake. Future studies should assess additional plausible mediators of this relationship in order to better understand the effect of family meals on dietary intake. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

  10. Role of Securin, Separase and Cohesins in female meiosis and polar body formation in Drosophila.

    PubMed

    Guo, Zhihao; Batiha, Osamah; Bourouh, Mohammed; Fifield, Eric; Swan, Andrew

    2016-02-01

    Chromosome segregation in meiosis is controlled by a conserved pathway that culminates in Separase-mediated cleavage of the α-kleisin Rec8, leading to dissolution of cohesin rings. Drosophila has no gene encoding Rec8, and the absence of a known Separase target raises the question of whether Separase and its regulator Securin (Pim in Drosophila) are important in Drosophila meiosis. Here, we investigate the role of Securin, Separase and the cohesin complex in female meiosis using fluorescence in situ hybridization against centromeric and arm-specific sequences to monitor cohesion. We show that Securin destruction and Separase activity are required for timely release of arm cohesion in anaphase I and centromere-proximal cohesion in anaphase II. They are also required for release of arm cohesion on polar body chromosomes. Cohesion on polar body chromosomes depends on the cohesin components SMC3 and the mitotic α-kleisin Rad21 (also called Vtd in Drosophila). We provide cytological evidence that SMC3 is required for arm cohesion in female meiosis, whereas Rad21, in agreement with recent findings, is not. We conclude that in Drosophila meiosis, cohesion is regulated by a conserved Securin-Separase pathway that targets a diverged Separase target, possibly within the cohesin complex. © 2016. Published by The Company of Biologists Ltd.

  11. Diverse Developmental Disorders from The One Ring: Distinct Molecular Pathways Underlie the Cohesinopathies

    PubMed Central

    Horsfield, Julia A.; Print, Cristin G.; Mönnich, Maren

    2012-01-01

    The multi-subunit protein complex, cohesin, is responsible for sister chromatid cohesion during cell division. The interaction of cohesin with DNA is controlled by a number of additional regulatory proteins. Mutations in cohesin, or its regulators, cause a spectrum of human developmental syndromes known as the “cohesinopathies.” Cohesinopathy disorders include Cornelia de Lange Syndrome and Roberts Syndrome. The discovery of novel roles for chromatid cohesion proteins in regulating gene expression led to the idea that cohesinopathies are caused by dysregulation of multiple genes downstream of mutations in cohesion proteins. Consistent with this idea, Drosophila, mouse, and zebrafish cohesinopathy models all show altered expression of developmental genes. However, there appears to be incomplete overlap among dysregulated genes downstream of mutations in different components of the cohesion apparatus. This is surprising because mutations in all cohesion proteins would be predicted to affect cohesin’s roles in cell division and gene expression in similar ways. Here we review the differences and similarities between genetic pathways downstream of components of the cohesion apparatus, and discuss how such differences might arise, and contribute to the spectrum of cohesinopathy disorders. We propose that mutations in different elements of the cohesion apparatus have distinct developmental outcomes that can be explained by sometimes subtly different molecular effects. PMID:22988450

  12. The effect of biological cohesion on current ripple development

    NASA Astrophysics Data System (ADS)

    Malarkey, Jonathan; Baas, Jaco H.; Hope, Julie

    2014-05-01

    Results are presented from laboratory experiments examining the role of biological cohesion, associated with Extra Polymeric Substances, on the development of current ripples. The results demonstrate the importance of biological cohesion compared to the effect of physical cohesion associated with clays in an otherwise sandy bed. FURTHER INFORMATION In fluvial and marine environments sediment transport is mainly dependent on the nature of the bed surface (rippled or flat) and the nature of cohesion in the bed. Cohesion can be either physical, as a result of the presence of clays, or biological as a result of the presence of organisms. In the case of the latter, biological cohesion occurs as a result of the presence of Extra Polymeric Substances (EPS) secreted by microorganisms. While it is known that EPS can dramatically increase the threshold of motion (Grant and Gust, 1987), comparatively little is known about the effect of EPS on ripple formation and development. The experiments described here seek to fill this gap. They also allow the effect of biological cohesion to be compared with that of physical cohesion from previous experiments (Baas et al., 2013). The experiments, which were conducted in a 10m flume at Bangor University, involved a current over a bed made of fine sand, with a median diameter of 0.148mm, and various amounts of xanthan gum, a proxy for naturally occurring EPS (Vardy et al., 2007). The hydrodynamic experimental conditions were matched very closely to those of Baas et al. (2013). The ripple dimensions were recorded through the glass side wall of the tank using time lapse photography. In the physical cohesion experiments of Baas et al. (2013) for clay contents up to 12%, the clay was very quickly winnowed out of the bed, leaving essentially clay-free ripples that developed at more or less the same rate as clean sand ripples. The resulting equilibrium ripples were essentially the same length as the clean sand ripples but reduced in height. By contrast, the biological cohesion experiments resulted in a drastic slowing down in ripple development, for much smaller amounts of xanthan (< 1/8%), but resulted in equilibrium ripples with the same dimensions as abiotic sand. This difference in effect for biological and physical cohesion is thought to be related to differences in the nature of the binding. In particular, sand grains with biological cohesion are inhibited from moving independently, which is crucial to ripple development. This work has profound implications for sediment transport studies and emphasises the importance of considering biology as well as clays in sediments. ACKNOWLEDGEMENTS This work was funded by the UK Natural Environment Research Council (NERC) under the 'COHBED' project (NE/1027223/1). REFERENCES Baas, J.H., Davies, A.G. and Malarkey, A.G. (2013) Bedform development in mixed sand-mud: the contrasting role of cohesive forces in flow and bed. Geomorphology, 182, 19-32. Grant, J. and Gust, G. (1987) Prediction of coastal sediment stability from photopigment content of mats of purple sulfur bacteria. Nature, 330, 244-246. Vardy, S., Saunders, J.E., Tolhurst, T.J., Davies, P.A., and Paterson, D.M. (2007) Calibration of the high-pressure cohesive strength meter (CSM). Continental Shelf Research, 27, 1190-1199.

  13. DYNAMIC PLANE-STRAIN SHEAR RUPTURE WITH A SLIP-WEAKENING FRICTION LAW CALCULATED BY A BOUNDARY INTEGRAL METHOD.

    USGS Publications Warehouse

    Andrews, D.J.

    1985-01-01

    A numerical boundary integral method, relating slip and traction on a plane in an elastic medium by convolution with a discretized Green function, can be linked to a slip-dependent friction law on the fault plane. Such a method is developed here in two-dimensional plane-strain geometry. Spontaneous plane-strain shear ruptures can make a transition from sub-Rayleigh to near-P propagation velocity. Results from the boundary integral method agree with earlier results from a finite difference method on the location of this transition in parameter space. The methods differ in their prediction of rupture velocity following the transition. The trailing edge of the cohesive zone propagates at the P-wave velocity after the transition in the boundary integral calculations. Refs.

  14. Application of the Refined Zigzag Theory to the Modeling of Delaminations in Laminated Composites

    NASA Technical Reports Server (NTRS)

    Groh, Rainer M. J.; Weaver, Paul M.; Tessler, Alexander

    2015-01-01

    The Refined Zigzag Theory is applied to the modeling of delaminations in laminated composites. The commonly used cohesive zone approach is adapted for use within a continuum mechanics model, and then used to predict the onset and propagation of delamination in five cross-ply composite beams. The resin-rich area between individual composite plies is modeled explicitly using thin, discrete layers with isotropic material properties. A damage model is applied to these resin-rich layers to enable tracking of delamination propagation. The displacement jump across the damaged interfacial resin layer is captured using the zigzag function of the Refined Zigzag Theory. The overall model predicts the initiation of delamination to within 8% compared to experimental results and the load drop after propagation is represented accurately.

  15. Factors associated with low unit cohesion in Australian Defence Force members who deployed to the Middle East (2001-2009).

    PubMed

    Kanesarajah, Jeeva; Waller, M; Zheng, W Y; Dobson, A J

    2016-10-01

    Unit cohesion has been shown to bolster the mental health of military personnel; hence, it is important to identify the characteristics that are associated with low unit cohesion, so that interventions to improve unit cohesion can be targeted and implemented. Little is known about the factors associated with low unit cohesion. This research aims to identify demographic, military service and deployment factors associated with low unit cohesion. Data from a self-reported cross-sectional study of 11 411 current or ex-serving Australian military personnel deployed to Iraq or Afghanistan between 2001 and 2009 were used. Multivariable logistic regression was used to investigate the research aims. Being female (adjusted OR (aOR) (95% CI) 1.35 (1.21 to 1.51)), non-commissioned officer (aOR (95% CI) 1.50 (1.39 to 1.62)), lower ranked (aOR (95% CI) 1.74 (1.51 to 2.01)) or having left military service (aOR (95% CI) 1.71 (1.46 to 2.02)) was associated with reporting low unit cohesion. Potentially modifiable factors such as performing logistic roles on deployment (aOR (95% CI) 1.13 (1.01 to 1.27)), dissatisfaction with work experience on deployment such as working with colleagues who did not do what was expected of them (aOR (95% CI) 4.09 (3.61 to 4.64)), and major problems at home while deployed (aOR (95% CI) 1.50 (1.38 to 1.63)) were also associated with reporting low unit cohesion. This is the first study to identify demographic, military service and deployment factors associated with low unit cohesion. The modifiable nature of unit cohesion means that military leaders could use this information to identify subgroups for targeted resilience interventions that may reduce vulnerabilities to mental health problems and improve the job satisfaction, preparedness and deployment experiences of serving members. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  16. Force Transmission Modes of Non-Cohesive and Cohesive Materials at the Critical State.

    PubMed

    Wang, Ji-Peng

    2017-08-31

    This paper investigates the force transmission modes, mainly described by probability density distributions, in non-cohesive dry and cohesive wet granular materials by discrete element modeling. The critical state force transmission patterns are focused on with the contact model effect being analyzed. By shearing relatively dense and loose dry specimens to the critical state in the conventional triaxial loading path, it is observed that there is a unique critical state force transmission mode. There is a universe critical state force distribution pattern for both the normal contact forces and tangential contact forces. Furthermore, it is found that using either the linear Hooke or the non-linear Hertz model does not affect the universe force transmission mode, and it is only related to the grain size distribution. Wet granular materials are also simulated by incorporating a water bridge model. Dense and loose wet granular materials are tested, and the critical state behavior for the wet material is also observed. The critical state strength and void ratio of wet granular materials are higher than those of a non-cohesive material. The critical state inter-particle distribution is altered from that of a non-cohesive material with higher probability in relatively weak forces. Grains in non-cohesive materials are under compressive stresses, and their principal directions are mainly in the axial loading direction. However, for cohesive wet granular materials, some particles are in tension, and the tensile stresses are in the horizontal direction on which the confinement is applied. The additional confinement by the tensile stress explains the macro strength and dilatancy increase in wet samples.

  17. Social Cohesion and Food Insecurity: Insights from the Geographic Research on Wellbeing (GROW) Study.

    PubMed

    Denney, Justin T; Kimbro, Rachel Tolbert; Heck, Katherine; Cubbin, Catherine

    2017-02-01

    Objectives Food insecurity in the United States is a stubborn public health issue, affecting more than one in five households with children and disproportionately impacting racial and ethnic minority women and their children. Past research and policy has focused on household predictors of food insecurity, but neglected broader factors, such as perceived neighborhood social cohesion, that might protect those most vulnerable to food insecurity. Methods We use a racially and ethnically diverse data set from the Geographic Research on Wellbeing study (N = 2847) of women and their young children in California to investigate whether social cohesion influences food insecurity and whether it moderates the relationship between race/ethnicity and food insecurity. Results We find that lower levels of perceived residential neighborhood social cohesion associate with higher odds of food insecurity even after considering important household socioeconomic factors. In addition, our results suggest that social cohesion is most relevant for reducing the risk of food insecurity among racial and ethnic minority mothers. For example, the probability of food insecurity for immigrant Latina mothers is nearly 0.40 in neighborhoods where mothers perceive little to no cohesion and less than 0.10 in neighborhoods where mothers perceive high cohesion. Conclusions for Practice Higher levels of neighborhood perceived social cohesion are protective against food insecurity in households with children and especially so for racial and ethnic minority households who are at a heightened risk of food insecurity. Supporting programs that focus on building closer knit communities may be a key to reducing food insecurity overall and for reducing disparities in food insecurity by race and ethnicity.

  18. Force Transmission Modes of Non-Cohesive and Cohesive Materials at the Critical State

    PubMed Central

    2017-01-01

    This paper investigates the force transmission modes, mainly described by probability density distributions, in non-cohesive dry and cohesive wet granular materials by discrete element modeling. The critical state force transmission patterns are focused on with the contact model effect being analyzed. By shearing relatively dense and loose dry specimens to the critical state in the conventional triaxial loading path, it is observed that there is a unique critical state force transmission mode. There is a universe critical state force distribution pattern for both the normal contact forces and tangential contact forces. Furthermore, it is found that using either the linear Hooke or the non-linear Hertz model does not affect the universe force transmission mode, and it is only related to the grain size distribution. Wet granular materials are also simulated by incorporating a water bridge model. Dense and loose wet granular materials are tested, and the critical state behavior for the wet material is also observed. The critical state strength and void ratio of wet granular materials are higher than those of a non-cohesive material. The critical state inter-particle distribution is altered from that of a non-cohesive material with higher probability in relatively weak forces. Grains in non-cohesive materials are under compressive stresses, and their principal directions are mainly in the axial loading direction. However, for cohesive wet granular materials, some particles are in tension, and the tensile stresses are in the horizontal direction on which the confinement is applied. The additional confinement by the tensile stress explains the macro strength and dilatancy increase in wet samples. PMID:28858238

  19. Analysis of factors influencing the bond strength in roll bonding processes

    NASA Astrophysics Data System (ADS)

    Khaledi, Kavan; Wulfinghoff, Stephan; Reese, Stefanie

    2018-05-01

    Cold Roll Bonding (CRB) is recognized as an industrial technique in which the metal sheets are joined together in order to produce laminate metal composites. In this technique, a metallurgical bond resulting from severe plastic deformation is formed between the rolled metallic layers. The main objective of this paper is to analyse different factors which may affect the bond formation in rolling processes. To achieve this goal, first, an interface model is employed which describes both the bonding and debonding. In this model, the bond strength evolution between the metallic layers is calculated based on the film theory of bonding. On the other hand, the debonding process is modelled by means of a bilinear cohesive zone model. In the numerical section, different scenarios are taken into account to model the roll bonding process of metal sheets. The numerical simulation includes the modelling of joining during the roll bonding process followed by debonding in a Double Cantilever Beam (DCB) peeling test. In all simulations, the metallic layers are regarded as elastoplastic materials subjected to large plastic deformations. Finally, the effects of some important factors on the bond formation are numerically investigated.

  20. Continuum Damage Mechanics Models for the Analysis of Progressive Failure in Open-Hole Tension Laminates

    NASA Technical Reports Server (NTRS)

    Song, Kyonchan; Li, Yingyong; Rose, Cheryl A.

    2011-01-01

    The performance of a state-of-the-art continuum damage mechanics model for interlaminar damage, coupled with a cohesive zone model for delamination is examined for failure prediction of quasi-isotropic open-hole tension laminates. Limitations of continuum representations of intra-ply damage and the effect of mesh orientation on the analysis predictions are discussed. It is shown that accurate prediction of matrix crack paths and stress redistribution after cracking requires a mesh aligned with the fiber orientation. Based on these results, an aligned mesh is proposed for analysis of the open-hole tension specimens consisting of different meshes within the individual plies, such that the element edges are aligned with the ply fiber direction. The modeling approach is assessed by comparison of analysis predictions to experimental data for specimen configurations in which failure is dominated by complex interactions between matrix cracks and delaminations. It is shown that the different failure mechanisms observed in the tests are well predicted. In addition, the modeling approach is demonstrated to predict proper trends in the effect of scaling on strength and failure mechanisms of quasi-isotropic open-hole tension laminates.

  1. Vocal fold tissue failure: preliminary data and constitutive modeling.

    PubMed

    Chan, Roger W; Siegmund, Thomas

    2004-08-01

    In human voice production (phonation), linear small-amplitude vocal fold oscillation occurs only under restricted conditions. Physiologically, phonation more often involves large-amplitude oscillation associated with tissue stresses and strains beyond their linear viscoelastic limits, particularly in the lamina propria extracellular matrix (ECM). This study reports some preliminary measurements of tissue deformation and failure response of the vocal fold ECM under large-strain shear The primary goal was to formulate and test a novel constitutive model for vocal fold tissue failure, based on a standard-linear cohesive-zone (SL-CZ) approach. Tissue specimens of the sheep vocal fold mucosa were subjected to torsional deformation in vitro, at constant strain rates corresponding to twist rates of 0.01, 0.1, and 1.0 rad/s. The vocal fold ECM demonstrated nonlinear stress-strain and rate-dependent failure response with a failure strain as low as 0.40 rad. A finite-element implementation of the SL-CZ model was capable of capturing the rate dependence in these preliminary data, demonstrating the model's potential for describing tissue failure. Further studies with additional tissue specimens and model improvements are needed to better understand vocal fold tissue failure.

  2. Diversity and Social Cohesion

    ERIC Educational Resources Information Center

    Pagani, Camilla

    2014-01-01

    The issue of diversity, in its broadest sense, is discussed here in its relation to social cohesion, cross-cultural relations, ingroup-outgroup relations and educational interventions. The main thesis of the paper is that real social cohesion in an ingroup rests on the acknowledgment of and the dialog with the diversities of the members of the…

  3. Group Cohesion DEOCS 4.1 Construct Validity Summary

    DTIC Science & Technology

    2017-08-01

    Group Cohesion DEOCS 4.1 Construct Validity Summary DEFENSE EQUAL OPPORTUNITY MANAGEMENT INSTITUTE DIRECTORATE...See Table 4 for more information regarding item reliabilities. The relationship between the original four-point scale (Organizational Cohesion) and...future analyses, including those using the seven-point scale. Tables 4 and 5 provide additional information regarding the reliability and descriptive

  4. Supporting Students' Learning in the Domain of Computer Science

    ERIC Educational Resources Information Center

    Gasparinatou, Alexandra; Grigoriadou, Maria

    2011-01-01

    Previous studies have shown that students with low knowledge understand and learn better from more cohesive texts, whereas high-knowledge students have been shown to learn better from texts of lower cohesion. This study examines whether high-knowledge readers in computer science benefit from a text of low cohesion. Undergraduate students (n = 65)…

  5. Fine-Tuning Cross-Battery Assessment Procedures: After Follow-Up Testing, Use All Valid Scores, Cohesive or Not

    ERIC Educational Resources Information Center

    Schneider, W. Joel; Roman, Zachary

    2018-01-01

    We used data simulations to test whether composites consisting of cohesive subtest scores are more accurate than composites consisting of divergent subtest scores. We demonstrate that when multivariate normality holds, divergent and cohesive scores are equally accurate. Furthermore, excluding divergent scores results in biased estimates of…

  6. Self-Esteem among Vietnamese American Adolescents: The Role of Self-Construal, Family Cohesion, and Social Support

    ERIC Educational Resources Information Center

    Lam, Brian Trung

    2005-01-01

    This prospective study examined whether interdependent self-construal (collectivism), independent self-construal (individualism), family cohesion, and social support would predict levels of self-esteem among Vietnamese American adolescents. Standardized self-report measures of family cohesion, social support, and self-esteem, as well as a measure…

  7. Using fluidized bed and flume experiments to quantify cohesion development from aging and drainage

    USDA-ARS?s Scientific Manuscript database

    Temporal variations in soil erosion resistance are often the result of a decrease in soil cohesion due to physical disruption followed by a regain of soil cohesion through a process analogous to a thixotropic sol-gel reaction also called aging, stabilization or consolidation. The goal of this study ...

  8. Effects of Lexical Cohesion and Macrorules on EFL Students' Main Idea Comprehension

    ERIC Educational Resources Information Center

    Wilawan, Sujunya

    2011-01-01

    This study investigated the effects of an instructional procedure which incorporated lexical cohesion and macrorules to promote main idea comprehension of Thai EFL students. One hundred and six undergraduate students taking a reading module were randomly assigned to one of three teaching conditions: the combined use of lexical cohesion and…

  9. Effects of Gradation and Cohesion on Bridge Scour : Volume 4 : Experimental Study of Scour Around Circular Piers in Cohesive Soils

    DOT National Transportation Integrated Search

    1999-12-01

    The effects of cohesion on pier scour was investigated experimentally using four-foot-wide, eight-foot-wide, and twenty-foot-wide test flumes at the Engineering Research Center, Colorado State University. In the first part of the experiments, clay-sa...

  10. Social Cohesion Among Sex Workers and Client Condom Refusal in a Canadian Setting: Implications for Structural and Community-Led Interventions.

    PubMed

    Argento, Elena; Duff, Putu; Bingham, Brittany; Chapman, Jules; Nguyen, Paul; Strathdee, Steffanie A; Shannon, Kate

    2016-06-01

    Community empowerment can be a powerful determinant of HIV risk among sex workers (SWs). This study modeled the impact of social cohesion on client condom refusal among SWs in Vancouver. Longitudinal data were drawn from a prospective cohort of SWs (2010-2013). Lippman and colleagues' Social Cohesion Scale measured SWs' connectedness (i.e., perception of mutual aid, trust, support). Multivariable logistic regression examined the independent effect of social cohesion on client condom refusal. Of 654 SWs, 22 % reported baseline client condom refusal and 34 % over 3 years. The baseline median social cohesion score was 24 (IQR 20-29, range 4-45). In the final confounding model, for every one-point increase in the social cohesion score, average odds of condom refusal decreased by 3 % (AOR 0.97; 95 % CI 0.95-0.99). Community empowerment can have a direct protective effect on HIV risk. These findings highlight the need for a legal framework that enables collectivization and SW-led efforts in the HIV response.

  11. The impact of trait emotional intelligence on nursing team performance and cohesiveness.

    PubMed

    Quoidbach, Jordi; Hansenne, Michel

    2009-01-01

    Claims about the positive influence of emotional intelligence (EI) on work team performance are very numerous, both in commercial and scientific literature. However, despite the huge interest that media and business consultants put in EI and its fast-growing use in organizations, there is very little empirical evidence to support these claims. In this study, we investigated the relationships between EI, performance, and cohesiveness in 23 nursing teams. EI was assessed using the modified version of the Schutte Emotional Intelligence Scale and cohesiveness with the Group Cohesiveness Scale. Finally, nursing team performance was measured at four different levels: job satisfaction, chief nursing executives' rating, turnover rate, and health care quality. Results showed that health care quality was positively correlated with emotion regulation. Emotion regulation was also positively correlated with group cohesiveness. Surprisingly, it also appears that emotion appraisal was negatively correlated with the health care quality provided by teams. These results suggest that EI and, more specifically, Emotional Regulation may provide an interesting new way of enhancing nursing teams' cohesion and patient/client outcomes.

  12. Family Rituals and Quality of Life in Children With Cancer and Their Parents: The Role of Family Cohesion and Hope

    PubMed Central

    Crespo, Carla; Canavarro, M. Cristina; Kazak, Anne E.

    2015-01-01

    Objective Family rituals are associated with adaptive functioning in pediatric illness, including quality of life (QoL). This article explores the role of family cohesion and hope as mediators of this association in children with cancer and their parents. Methods Portuguese children with cancer (N = 389), on- and off-treatment, and one of their parents completed self-report measures. Structural equation modeling was used to examine direct and indirect links between family rituals and QoL. Results When children and parents reported higher levels of family rituals, they also reported more family cohesion and hope, which were linked to better QoL. At the dyadic level, children’s QoL was related to parents’ family rituals through the child’s family cohesion. This model was valid across child’s age-group, treatment status, and socioeconomic status. Conclusions Family rituals are important in promoting QoL in pediatric cancer via family cohesion and hope individually and via family cohesion in terms of parent–child interactions. PMID:25775914

  13. A test of the social cohesion hypothesis: interactive female marmots remain at home.

    PubMed

    Blumstein, Daniel T; Wey, Tina W; Tang, Karisa

    2009-08-22

    Individuals frequently leave home before reaching reproductive age, but the proximate causes of natal dispersal remain relatively unknown. The social cohesion hypothesis predicts that individuals who engage in more (affiliative) interactions are less likely to disperse. Despite the intuitive nature of this hypothesis, support is both limited and equivocal. We used formal social network analyses to quantify precisely both direct and indirect measures of social cohesion in yellow-bellied marmots. Because approximately 50 per cent of female yearlings disperse, we expected that social relationships and network measures of cohesion would predict dispersal. By contrast, because most male yearlings disperse, we expected that social relationships and cohesion would play a less important role. We found that female yearlings that interacted with more individuals, and those that were more socially embedded in their groups, were less likely to disperse. For males, social interactions were relatively unimportant determinants of dispersal. This is the first strong support for the social cohesion hypothesis and suggests that the specific nature of social relationships, not simply the number of affiliative relationships, may influence the propensity to disperse.

  14. A test of the social cohesion hypothesis: interactive female marmots remain at home

    PubMed Central

    Blumstein, Daniel T.; Wey, Tina W.; Tang, Karisa

    2009-01-01

    Individuals frequently leave home before reaching reproductive age, but the proximate causes of natal dispersal remain relatively unknown. The social cohesion hypothesis predicts that individuals who engage in more (affiliative) interactions are less likely to disperse. Despite the intuitive nature of this hypothesis, support is both limited and equivocal. We used formal social network analyses to quantify precisely both direct and indirect measures of social cohesion in yellow-bellied marmots. Because approximately 50 per cent of female yearlings disperse, we expected that social relationships and network measures of cohesion would predict dispersal. By contrast, because most male yearlings disperse, we expected that social relationships and cohesion would play a less important role. We found that female yearlings that interacted with more individuals, and those that were more socially embedded in their groups, were less likely to disperse. For males, social interactions were relatively unimportant determinants of dispersal. This is the first strong support for the social cohesion hypothesis and suggests that the specific nature of social relationships, not simply the number of affiliative relationships, may influence the propensity to disperse. PMID:19493901

  15. Social Cohesion Among Sex Workers and Client Condom Refusal in a Canadian Setting: Implications for Structural and Community-Led Interventions

    PubMed Central

    Argento, Elena; Duff, Putu; Bingham, Brittany; Chapman, Jules; Nguyen, Paul; Strathdee, Steffanie A.

    2015-01-01

    Community empowerment can be a powerful determinant of HIV risk among sex workers (SWs). This study modeled the impact of social cohesion on client condom refusal among SWs in Vancouver. Longitudinal data were drawn from a prospective cohort of SWs (2010–2013). Lippman and colleagues’ Social Cohesion Scale measured SWs’ connectedness (i.e., perception of mutual aid, trust, support). Multivariable logistic regression examined the independent effect of social cohesion on client condom refusal. Of 654 SWs, 22 % reported baseline client condom refusal and 34 % over 3 years. The baseline median social cohesion score was 24 (IQR 20–29, range 4–45). In the final confounding model, for every one-point increase in the social cohesion score, average odds of condom refusal decreased by 3 % (AOR 0.97; 95 % CI 0.95–0.99). Community empowerment can have a direct protective effect on HIV risk. These findings highlight the need for a legal framework that enables collectivization and SW-led efforts in the HIV response. PMID:26499335

  16. Relationship between Family Adaptability, Cohesion and Adolescent Problem Behaviors: Curvilinearity of Circumplex Model.

    PubMed

    Joh, Ju Youn; Kim, Sun; Park, Jun Li; Kim, Yeon Pyo

    2013-05-01

    The Family Adaptability and Cohesion Evaluation Scale (FACES) III using the circumplex model has been widely used in investigating family function. However, the criticism of the curvilinear hypothesis of the circumplex model has always been from an empirical point of view. This study examined the relationship between adolescent adaptability, cohesion, and adolescent problem behaviors, and especially testing the consistency of the curvilinear hypotheses with FACES III. We used the data from 398 adolescent participants who were in middle school. A self-reported questionnaire was used to evaluate the FACES III and Youth Self Report. According to the level of family adaptability, significant differences were evident in internalizing problems (P = 0.014). But, in externalizing problems, the results were not significant (P = 0.305). Also, according to the level of family cohesion, significant differences were in internalizing problems (P = 0.002) and externalizing problems (P = 0.004). The relationship between the dimensions of adaptability, cohesion and adolescent problem behaviors was not curvilinear. In other words, adolescents with high adaptability and high cohesion showed low problem behaviors.

  17. Relationship between Family Adaptability, Cohesion and Adolescent Problem Behaviors: Curvilinearity of Circumplex Model

    PubMed Central

    Joh, Ju Youn; Kim, Sun; Park, Jun Li

    2013-01-01

    Background The Family Adaptability and Cohesion Evaluation Scale (FACES) III using the circumplex model has been widely used in investigating family function. However, the criticism of the curvilinear hypothesis of the circumplex model has always been from an empirical point of view. This study examined the relationship between adolescent adaptability, cohesion, and adolescent problem behaviors, and especially testing the consistency of the curvilinear hypotheses with FACES III. Methods We used the data from 398 adolescent participants who were in middle school. A self-reported questionnaire was used to evaluate the FACES III and Youth Self Report. Results According to the level of family adaptability, significant differences were evident in internalizing problems (P = 0.014). But, in externalizing problems, the results were not significant (P = 0.305). Also, according to the level of family cohesion, significant differences were in internalizing problems (P = 0.002) and externalizing problems (P = 0.004). Conclusion The relationship between the dimensions of adaptability, cohesion and adolescent problem behaviors was not curvilinear. In other words, adolescents with high adaptability and high cohesion showed low problem behaviors. PMID:23730484

  18. SA1 and TRF1 synergistically bind to telomeric DNA and promote DNA-DNA pairing

    NASA Astrophysics Data System (ADS)

    Wang, Hong; Lin, Jiangguo; Countryman, Preston; Pan, Hai; Parminder Kaur Team; Robert Riehn Team; Patricia Opresko Team; Jane Tao Team; Susan Smith Team

    Impaired telomere cohesion leads to increased aneuploidy and early onset of tumorigenesis. Cohesion is thought to occur through the entrapment of two DNA strands within tripartite cohesin ring(s), along with a fourth subunit (SA1/SA2). Surprisingly, cohesion rings are not essential for telomere cohesion, which instead requires SA1 and shelterin proteins including TRF1. However, neither this unique cohesion mechanism at telomeres or DNA-binding properties of SA1 is understood. Here, using single-molecule fluorescence imaging of quantum dot-labeled proteins on DNA we discover that while SA1 diffuses across multiple telomeric and non-telomeric regions, the diffusion mediated through its N-terminal domain is slower at telomeric regions. However, addition of TRF1 traps SA1 within telomeric regions, which form longer DNA-DNA pairing tracts than with TRF1 alone, as revealed by atomic force microscopy. Together, these experimental results and coarse-grained molecular dynamics simulations suggest that TRF1 and SA1 synergistically interact with DNA to support telomere cohesion without cohesin rings.

  19. The interplay between neighbourhood characteristics: The health impact of changes in social cohesion, disorder and unsafety feelings.

    PubMed

    Ruijsbroek, Annemarie; Droomers, Mariël; Hardyns, Wim; Groenewegen, Peter P; Stronks, Karien

    2016-05-01

    This study examined how the health of Dutch residents in 2012 was influenced by changes in neighbourhood social cohesion, disorder, and unsafety feelings between 2009 and 2011. Multilevel regression analyses on repeated cross-sectional survey data included 43,635 respondents living in 2100 areas. Deteriorating social cohesion and unsafety feelings were negatively associated with general health, while improvement in social cohesion was associated with better general health of the population. When the interplay of neighbourhood features was considered, deteriorating neighbourhood safety appeared decisive for health, i.e. improving social cohesion did not mitigate the health effect of deteriorating neighbourhood safety. Our results show it is important to take concurrent interactions between neighbourhood features into account when examining their health impact. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Roles of the sister chromatid cohesion apparatus in gene expression, development, and human syndromes

    PubMed Central

    Dorsett, Dale

    2006-01-01

    The sister chromatid cohesion apparatus mediates physical pairing of duplicated chromosomes. This pairing is essential for appropriate distribution of chromosomes into the daughter cells upon cell division. Recent evidence shows that the cohesion apparatus, which is a significant structural component of chromosomes during interphase, also affects gene expression and development. The Cornelia de Lange (CdLS) and Roberts/SC phocomelia (RBS/SC) genetic syndromes in humans are caused by mutations affecting components of the cohesion apparatus. Studies in Drosophila suggest that effects on gene expression are most likely responsible for developmental alterations in CdLS. Effects on chromatid cohesion are apparent in RBS/SC syndrome, but data from yeast and Drosophila point to the likelihood that changes in expression of genes located in heterochromatin could contribute to the developmental deficits. PMID:16819604

  1. Fast determination of structurally cohesive subgroups in large networks

    PubMed Central

    Sinkovits, Robert S.; Moody, James; Oztan, B. Tolga; White, Douglas R.

    2016-01-01

    Structurally cohesive subgroups are a powerful and mathematically rigorous way to characterize network robustness. Their strength lies in the ability to detect strong connections among vertices that not only have no neighbors in common, but that may be distantly separated in the graph. Unfortunately, identifying cohesive subgroups is a computationally intensive problem, which has limited empirical assessments of cohesion to relatively small graphs of at most a few thousand vertices. We describe here an approach that exploits the properties of cliques, k-cores and vertex separators to iteratively reduce the complexity of the graph to the point where standard algorithms can be used to complete the analysis. As a proof of principle, we apply our method to the cohesion analysis of a 29,462-vertex biconnected component extracted from a 128,151-vertex co-authorship data set. PMID:28503215

  2. The impact of neighbourhood violence and social cohesion on smoking behaviours among a cohort of smokers in Mexico.

    PubMed

    Fleischer, Nancy L; Lozano, Paula; Arillo Santillán, Edna; Reynales Shigematsu, Luz Myriam; Thrasher, James F

    2015-11-01

    Recent increases in violent crime may impact a variety of health outcomes in Mexico. We examined relationships between neighbourhood-level violence and smoking behaviours in a cohort of Mexican smokers from 2011 to 2012, and whether neighbourhood-level social cohesion modified these relationships. Data were analysed from adult smokers and recent ex-smokers who participated in waves 5 and 6 of the International Tobacco Control Mexico survey. Self-reported neighbourhood violence and social cohesion were asked of wave 6 survey participants (n=2129 current and former smokers, n=150 neighbourhoods). Neighbourhood-level averages for violence and social cohesion (ranges 4-14 and 10-25, respectively) were assigned to individuals. We used generalised estimating equations to determine associations between neighbourhood indicators and individual-level smoking intensity, quit behaviours and relapse. Higher neighbourhood violence was associated with higher smoking intensity (risk ratio (RR)=1.17, 95% CI 1.02 to 1.33), and fewer quit attempts (RR=0.72, 95% CI 0.61 to 0.85). Neighbourhood violence was not associated with successful quitting or relapse. Higher neighbourhood social cohesion was associated with more quit attempts and more successful quitting. Neighbourhood social cohesion modified the association between neighbourhood violence and smoking intensity: in neighbourhoods with higher social cohesion, as violence increased, smoking intensity decreased and in neighbourhoods with lower social cohesion, as violence increased, so did smoking intensity. In the context of recent increased violence in Mexico, smokers living in neighbourhoods with more violence may smoke more cigarettes per day and make fewer quit attempts than their counterparts in less violent neighbourhoods. Neighbourhood social cohesion may buffer the impact of violence on smoking intensity. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  3. Linking Anger Trait with Somatization in Low-Grade College Students: Moderating Roles of Family Cohesion and Adaptability.

    PubMed

    Liu, Liang; Liu, Cuilian; Zhao, Xudong

    2017-02-25

    Between 22% and 58% of patients in primary care settings complain of somatic symptoms. Previous research has found that somatization was associated with anger traits and family functions. However, studies that specifically assess the moderating effect of family function in how anger traits become somatic complaints are lacking. This study was designed to examine whether the variances in family cohesion and family adaptability moderated the strength of the relationship between anger traits and somatization. A cross-section design was conducted and 2008 college students were recruited from a comprehensive university in Shanghai. All participants finished questionnaires including Symptom Check List- 90 (SCL-90), State-Trait Anger Expression Inventory 2 (STAXI-2, Chinese version) and Family Adaptability and Cohesion Scale, second edition (FACES II, Chinese Version) to assess their degree of current somatization, anger trait and family function. Hierarchical linear regression analysis (Enter) was conducted respectively for men and women to examine the moderation effect of family cohesion and family adaptability in the association between anger and somatization. Somatic symptoms were significantly linked in the expected directions with depression and anger trait for both genders. Family cohesion and family adaptability were negatively associated with somatic symptoms. For female college students family cohesion was found to moderate the link between anger trait and somatization, but for male college students the moderation effect of family cohesion was marginally significant. The moderating role of family adaptability was significant for neither male nor female after current depressive symptoms were accounted for. Proneness to anger is an independent predictor of somatization. For women, a high level of family cohesion was a protective factor which could reduce the influence of anger trait on somatic symptoms. Without comorbidity of current depression, family adaptability to some degree exempted individuals with anger proneness from developing somatic complaints. Interventions that integrate family cohesion cultivation, family flexibility fostering and depression treatment might be more effective for somatic patients high in anger trait.

  4. Double-jeopardy: The joint impact of neighborhood disadvantage and low social cohesion on cumulative risk of disease among African American men and women in the Jackson Heart Study.

    PubMed

    Barber, Sharrelle; Hickson, DeMarc A; Kawachi, Ichiro; Subramanian, S V; Earls, Felton

    2016-03-01

    Few studies have examined the joint impact of neighborhood disadvantage and low social cohesion on health. Moreover, no study has considered the joint impact of these factors on a cumulative disease risk profile among a large sample of African American adults. Using data from the Jackson Heart Study, we examined the extent to which social cohesion modifies the relationship between neighborhood disadvantage and cumulative biological risk (CBR)-a measure of accumulated risk across multiple physiological systems. Our analysis included 4408 African American women and men ages 21-85 residing in the Jackson, MS Metropolitan Area. We measured neighborhood disadvantage using a composite score of socioeconomic indicators from the 2000 US Census and social cohesion was assessed using a 5-item validated scale. Standardized z-scores of biomarkers representing cardiovascular, metabolic, inflammatory, and neuroendocrine systems were combined to create a CBR score. We used two-level linear regression models with random intercepts adjusting for socio-demographic and behavioral covariates in the analysis. A three-way interaction term was included to examine whether the relationship between neighborhood disadvantage and CBR differed by levels of social cohesion and gender. The interaction between neighborhood disadvantage, social cohesion and gender was statistically significant (p = 0.05) such that the association between living in a disadvantaged neighborhood and CBR was strongest for men living in neighborhoods with low levels of social cohesion (B = 0.63, SE: 0.32). In gender-specific models, we found a statistically significant interaction between neighborhood disadvantage and social cohesion for men (p = 0.05) but not for women (p = 0.50). Neighborhoods characterized by high levels of economic disadvantage and low levels of social cohesion contribute to higher cumulative risk of disease among African American men. This suggests that they may face a unique set of challenges that put them at greater risk in these settings. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Double-Jeopardy: The Joint Impact of Neighborhood Disadvantage and Low Social Cohesion on Cumulative Risk of Disease Among African American Men and Women in the Jackson Heart Study

    PubMed Central

    Barber, Sharrelle; Hickson, DeMarc A.; Kawachi, Ichiro; Subramanian, S.V.; Earls, Felton

    2016-01-01

    Objectives Few studies have examined the joint impact of neighborhood disadvantage and low social cohesion on health. Moreover, no study has considered the joint impact of these factors on a cumulative disease risk profile among a large sample of African American adults. Using data from the Jackson Heart Study, we examined the extent to which social cohesion modifies the relationship between neighborhood disadvantage and cumulative biological risk (CBR)—a measure of accumulated risk across multiple physiological systems. Methods Our analysis included 4,408 African American women and men ages 21–85 residing in the Jackson, MS Metropolitan Area. We measured neighborhood disadvantage using a composite score of socioeconomic indicators from the 2000 US Census and social cohesion was assessed using a 5-item validated scale. Standardized z-scores of biomarkers representing cardiovascular, metabolic, inflammatory, and neuroendocrine systems were combined to create a CBR score. We used two-level linear regression models with random intercepts adjusting for socio-demographic and behavioral covariates in the analysis. A three-way interaction term was included to examine whether the relationship between neighborhood disadvantage and CBR differed by levels of social cohesion and gender. Results The interaction between neighborhood disadvantage, social cohesion and gender was statistically significant (p=0.05) such that the association between living in a disadvantaged neighborhood and CBR was strongest for men living in neighborhoods with low levels of social cohesion (B=0.63, SE: 0.32). In gender-specific models, we found a statistically significant interaction between neighborhood disadvantage and social cohesion for men (p=0.05) but not for women (p=0.50). Conclusion Neighborhoods characterized by high levels of economic disadvantage and low levels of social cohesion contribute to higher cumulative risk of disease among African American men. This suggests that they may face a unique set of challenges that put them at greater risk in these settings. PMID:26894941

  6. Sociometric network structure and its association with methamphetamine use norms among homeless youth.

    PubMed

    Barman-Adhikari, Anamika; Begun, Stephanie; Rice, Eric; Yoshioka-Maxwell, Amanda; Perez-Portillo, Andrea

    2016-07-01

    Homeless youths' social networks are consistently linked with their substance use. Social networks influence behavior through several mechanisms, especially social norms. This study used sociometric analyses to understand whether social norms of drug use behaviors are clustered in network structures and whether these perceived norms (descriptive and injunctive) influence youths' drug use behaviors. An event-based approach was used to delineate boundaries of the two sociometric networks of homeless youth, one in Los Angeles, CA (n = 160) and the other in Santa Monica, CA (n = 130). Network characteristics included centrality (i.e., popularity) and cohesiveness (location in dense subnetworks). The primary outcome was recent methamphetamine use. Results revealed that both descriptive and injunctive norms influenced methamphetamine use. Network cohesion was found to be associated with perception of both descriptive and injunctive norms in both networks, however in opposite directions. Network interventions therefore might be effective if designed to capitalize on social influence that naturally occurs in cohesive parts of networks. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. On the emergence of an ‘intention field’ for socially cohesive agents

    NASA Astrophysics Data System (ADS)

    Bouchaud, Jean-Philippe; Borghesi, Christian; Jensen, Pablo

    2014-03-01

    We argue that when a social convergence mechanism exists and is strong enough, one should expect the emergence of a well-defined ‘field’, i.e. a slowly evolving, local quantity around which individual attributes fluctuate in a finite range. This condensation phenomenon is well illustrated by the Deffuant-Weisbuch opinion model for which we provide a natural extension to allow for spatial heterogeneities. We show analytically and numerically that the resulting dynamics of the emergent field is a noisy diffusion equation that has a slow dynamics. This random diffusion equation reproduces the long-ranged, logarithmic decrease of the correlation of spatial voting patterns empirically found in Borghesi and Bouchaud (2010 Eur. Phys. J. B 75 395) and Borghesi et al (2012 PLoS One 7 e36289). Interestingly enough, we find that when the social cohesion mechanism becomes too weak, cultural cohesion breaks down completely, in the sense that the distribution of intentions/opinions becomes infinitely broad. No emerging field exists in this case. All these analytical findings are confirmed by numerical simulations of an agent-based model.

  8. Cohesive Neighborhoods Where Social Expectations Are Shared May Have Positive Impact On Adolescent Mental Health.

    PubMed

    Donnelly, Louis; McLanahan, Sara; Brooks-Gunn, Jeanne; Garfinkel, Irwin; Wagner, Brandon G; Jacobsen, Wade C; Gold, Sarah; Gaydosh, Lauren

    2016-11-01

    Adolescent mental health problems are associated with poor health and well-being in adulthood. We used data from a cohort of 2,264 children born in large US cities in 1998-2000 to examine whether neighborhood collective efficacy (a combination of social cohesion and control) is associated with improvements in adolescent mental health. We found that children who grew up in neighborhoods with high collective efficacy experienced fewer depressive and anxiety symptoms during adolescence than similar children from neighborhoods with low collective efficacy. The magnitude of this neighborhood effect is comparable to the protective effects of depression prevention programs aimed at general or at-risk adolescent populations. Our findings did not vary by family or neighborhood income, which indicates that neighborhood collective efficacy supports adolescent mental health across diverse populations and urban settings. We recommend a greater emphasis on neighborhood environments in individual mental health risk assessments and greater investment in community-based initiatives that strengthen neighborhood social cohesion and control. Project HOPE—The People-to-People Health Foundation, Inc.

  9. Educational Brief: Using Space for a Better Foundation on Earth Mechanics of Granular Materials

    NASA Technical Reports Server (NTRS)

    Dooling, Dave (Editor)

    2002-01-01

    Soils are three-phase composite materials that consist of soil, solid particles, and voids filled with water and/or air. Based on the particle-size distribution, they are generally classified as fine-grained (clays and plastic silts) and coarse-grained soils (nonplastic silts, sand, and gravel). Soil's resistance to external loadings is mainly derived from friction between particles and cohesion. Friction resistance is due to particles' surface-to-surface friction, interlocking, crushing, rearrangement, and dilation (or expansion) during shearing. Cohesion can be due to chemical cementation between particles, electrostatic and electromagnetic forces, and soil-water reaction and equilibrium. The basic factor responsible for the strength of coarse-grained soils is friction. Cohesion can be ignored. This educational brief focuses on measuring shear strength of sands (typical example of coarse-grained soils) where, for the same material, packing density is a main factor to be considered when one asks about the shear strength value. As the external load is applied, the soil's resistance is attained through shearing resistance, which causes the soil volume to increase (expand) or decrease (compress) depending on the initial packing density.

  10. Discrete Element Method Simulation of a Boulder Extraction From an Asteroid

    NASA Technical Reports Server (NTRS)

    Kulchitsky, Anton K.; Johnson, Jerome B.; Reeves, David M.; Wilkinson, Allen

    2014-01-01

    The force required to pull 7t and 40t polyhedral boulders from the surface of an asteroid is simulated using the discrete element method considering the effects of microgravity, regolith cohesion and boulder acceleration. The connection between particle surface energy and regolith cohesion is estimated by simulating a cohesion sample tearing test. An optimal constant acceleration is found where the peak net force from inertia and cohesion is a minimum. Peak pulling forces can be further reduced by using linear and quadratic acceleration functions with up to a 40% reduction in force for quadratic acceleration.

  11. Comprehension of Health-related Written Materials by Older Adults

    PubMed Central

    Liu, Chiung-ju; Kemper, Susan; Bovaird, James A.

    2008-01-01

    This study examined how Flesch Reading Ease and text cohesion affect older adults' comprehension of common health texts. All older adults benefited when high Flesh Reading Ease was combined with high cohesion. Older adults with small working memories had more difficulty understanding texts high in Flesch Reading Ease. Additionally, older adults with low verbal ability or older than 77 years of age had difficulty understanding texts high in text cohesion but low in Flesch Reading Ease. These results imply that writers must increase Flesch Reading Ease without disrupting text cohesion to ensure comprehension of health-related texts. PMID:19543546

  12. Family functioning in the context of parental bipolar disorder: associations with offspring age, sex, and psychopathology.

    PubMed

    Freed, Rachel D; Tompson, Martha C; Wang, Christine H; Otto, Michael W; Hirshfeld-Becker, Dina R; Nierenberg, Andrew A; Henin, Aude

    2015-02-01

    Previous research has shown that families with a parent who has bipolar disorder (BD) may experience family functioning difficulties. However, the association between family functioning and psychopathology among offspring of parents with BD, and offspring characteristics that may moderate this association, remains poorly understood. This study examined the cross-sectional associations between family functioning (cohesion, expressiveness, and conflict) and psychopathology in 117 offspring (ages 5-18) of 75 parents with BD. We also examined whether age and sex differences moderated these associations. We measured offspring psychopathology by examining current dimensional symptoms and DSM-IV emotional and behavioral disorders. Correlational analyses indicated that higher family conflict and lower cohesion were associated with higher internalizing and externalizing symptoms in offspring. Lower family cohesion was also associated with current offspring mood disorders. Moderation analyses indicated, first, that the link between lower family cohesion and internalizing symptoms was stronger for younger offspring compared to older offspring. Second, higher family conflict and current mood disorder were associated in younger males but not in older males or in females. Results remained the same after controlling for parental anxiety or substance use disorder comorbidity. Our study highlights the importance of accounting for family functioning when working with offspring at risk for BD, while also recognizing that the connections between family functioning and offspring outcomes are complex and differ based on offspring sex and developmental stage. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  13. Social Capital or Social Cohesion: What Matters for Subjective Well-Being?

    ERIC Educational Resources Information Center

    Klein, Carlo

    2013-01-01

    The theoretical analysis of the concepts of social capital and of social cohesion shows that social capital should be considered as a micro concept whereas social cohesion, being a broader concept than social capital, is a more appropriate concept for macro analysis. Therefore, we suggest that data on the individual level should only be used to…

  14. Comparison of Group Cohesion, Class Participation, and Exam Performance in Live and Online Classes

    ERIC Educational Resources Information Center

    Galyon, Charles E.; Heaton, Eleanore C. T.; Best, Tiffany L.; Williams, Robert L.

    2016-01-01

    Though class participation and group cohesion have shown some potential to promote student performance in conventional classrooms, their efficacy has not yet been demonstrated in an online-class setting. Group cohesion, defined as member attraction to and self-identification with a group, is thought to promote positive interdependence and the…

  15. Developing Cohesive Leadership Means Addressing All Parts of the System

    ERIC Educational Resources Information Center

    Fisher, Troyce

    2010-01-01

    In her role with the School Administrators of Iowa leading Iowa's leadership grant from The Wallace Foundation, the author works with a coalition of individuals and groups striving to implement a cohesive leadership system for school leaders. Efforts to create a cohesive leadership system in Iowa for the past nine years have resulted in many…

  16. Effects of a Low-Element Challenge Course on Abstinence Self-Efficacy and Group Cohesion

    ERIC Educational Resources Information Center

    Clem, Jamie M.; Smith, Thomas E.; Richards, Kristin V.

    2012-01-01

    Substance abuse researchers identify self-efficacy and group cohesion as important components in alcohol and other drug-dependency treatment. Objectives: The purpose of this single-group, pretest-posttest study is to explore the therapeutic value of a challenge course intervention on the self-efficacy and group cohesion of nine chemically…

  17. The Development of Cohesion in a Learner Corpus

    ERIC Educational Resources Information Center

    Neary-Sundquist, Colleen A.

    2013-01-01

    This study examines the use of cohesive devices (pragmatic markers and conjunctions) in a 24,000-word corpus of transcribed oral data from 47 learners and native speakers of English. Both of these cohesive devices increase with proficiency level, but not in the same way. Conjunction use seems to increase steadily, and only the differences between…

  18. 2D and 3D Multiscale/Multicomponent Modeling of Impact Response of Heterogeneous Energetic Composites

    DTIC Science & Technology

    2016-06-01

    7 Development of Cohesive Finite Element Method (CFEM) Capability ................................7 3D...Cohesive Finite Element Method (CFEM) framework A new scientific framework and technical capability is developed for the computational analyses of...this section should shift from reporting activities to reporting accomplishments. Development of Cohesive Finite Element Method (CFEM) Capability

  19. "Sticking Together": The Adolescent Experience of the Cohesion Process in Rural School Counseling Groups

    ERIC Educational Resources Information Center

    Gray, Tara M.; Rubel, Deborah

    2018-01-01

    The purpose of this study was to develop a grounded theory of how adolescents experience the cohesion process in rural school counseling groups. A total of 20 individual interviews with 7 participants were conducted. Data analysis generated the central category of the cohesion process as "sticking together," which describes a "tight…

  20. Exploring Group Cohesion in a Higher Education Field Experience

    ERIC Educational Resources Information Center

    Malcarne, Brian Keith

    2012-01-01

    The purpose of this study was to gain understanding into the experience of group cohesion for university students participating in an academic field experience. A mixed methods approach was used following a two-phase, sequential research design to help provide a more complete explanation of how group cohesion was impacted by the field experience.…

  1. Anxiety Disorders and Latinos: The Role of Family Cohesion and Family Discord

    ERIC Educational Resources Information Center

    Priest, Jacob B.; Denton, Wayne

    2012-01-01

    Family cohesion has shown to be associated with lower psychological distress and other risk behaviors for Latinos, but little is known about the relationship of family cohesion, family discord, and anxiety disorders. Using data from the National Latino and Asian American Study (n = 2,554), this study examines the relationship between family…

  2. Family Cohesion and Romantic and Sexual Initiation: A Three Wave Longitudinal Study

    ERIC Educational Resources Information Center

    de Graaf, Hanneke; van de Schoot, Rens; Woertman, Liesbeth; Hawk, Skyler T.; Meeus, Wim

    2012-01-01

    Although the relation between family relationships and the timing of sexual debut has been the focus of many studies, research on mediating factors is scarce. This study examines whether low levels of family cohesion result in an earlier onset of romantic and sexual experiences, and whether the link between family cohesion and an early sexual…

  3. The Measurement of the Perception of Cohesion: A Second Language Example.

    ERIC Educational Resources Information Center

    Anderson, Jonathan

    Within the framework of a general model of communication, a model of language communication has been developed and applied to the perception of cohesion. To measure students' perception of textual cohesion, a pilot study in the United Kingdom built "noise" into texts by deleting parts of each texts. Subjects, 59 nonremedial students whose first…

  4. Referential Cohesion and Logical Coherence of Narration after Closed Head Injury

    ERIC Educational Resources Information Center

    Davis, G. Albyn; Coelho, Carl A.

    2004-01-01

    A group with closed head injury was compared to neurologically intact controls regarding the referential cohesion and logical coherence of narrative production. A sample of six stories was obtained with tasks of cartoon-elicited story-telling and auditory-oral retelling. We found deficits in the clinical group with respect to referential cohesion,…

  5. Development of Improved Printed Wiring Board Inner Layer Adhesion.

    DTIC Science & Technology

    1982-06-01

    24722-49 A Oak-Atlantic 2048 Cohesive Failure in "C" Stage B Oak-Atlantic 1990 Cohesive Failure in "C" Stage C Mica 2018 Cohesive Failure In "C" Stage D...allowable resistance between test points for all IR measurements was 500 megohms. The results showed no blistering, measling , crazing or delaminatin due

  6. Socioeconomic Inequalities in Psychological Distress among Urban Adults: The Moderating Role of Neighborhood Social Cohesion.

    PubMed

    Erdem, Özcan; Van Lenthe, Frank J; Prins, Rick G; Voorham, Toon A J J; Burdorf, Alex

    2016-01-01

    Various studies have reported socioeconomic inequalities in mental health among urban residents. This study aimed at investigating whether neighborhood social cohesion influences the associations between socio-economic factors and psychological distress. Cross-sectional questionnaire study on a random sample of 18,173 residents aged 16 years and older from 211 neighborhoods in the four largest cities in the Netherlands. Psychological distress was the dependent variable (scale range 10-50). Neighborhood social cohesion was measured by five statements and aggregated to the neighborhood level using ecometrics methodology. Multilevel linear regression analyses were used to investigate cross-level interactions, adjusted for neighborhood deprivation, between individual characteristics and social cohesion with psychological distress. The mean level of psychological distress among urban residents was 17.2. Recipients of disability, social assistance or unemployment benefits reported higher psychological distress (β = 5.6, 95%CI 5.2 to 5.9) than those in paid employment. Persons with some or great financial difficulties reported higher psychological distress (β = 3.4, 95%CI 3.2 to 3.6) than those with little or no financial problems. Socio-demographic factors were also associated with psychological distress, albeit with much lower influence. Living in a neighborhood with high social cohesion instead of low social cohesion was associated with a lower psychological distress of 22% among recipients of disability, social assistance or unemployment benefits and of 13% among citizens with financial difficulties. Residing in socially cohesive neighborhoods may reduce the influence of lack of paid employment and financial difficulties on psychological distress among urban adults. Urban policies aimed at improving neighborhood social cohesion may contribute to decreasing socio-economic inequalities in mental health.

  7. Socioeconomic Inequalities in Psychological Distress among Urban Adults: The Moderating Role of Neighborhood Social Cohesion

    PubMed Central

    Erdem, Özcan; Van Lenthe, Frank J.; Prins, Rick G.; Voorham, Toon A. J. J.; Burdorf, Alex

    2016-01-01

    Background Various studies have reported socioeconomic inequalities in mental health among urban residents. This study aimed at investigating whether neighborhood social cohesion influences the associations between socio-economic factors and psychological distress. Methods Cross-sectional questionnaire study on a random sample of 18,173 residents aged 16 years and older from 211 neighborhoods in the four largest cities in the Netherlands. Psychological distress was the dependent variable (scale range 10–50). Neighborhood social cohesion was measured by five statements and aggregated to the neighborhood level using ecometrics methodology. Multilevel linear regression analyses were used to investigate cross-level interactions, adjusted for neighborhood deprivation, between individual characteristics and social cohesion with psychological distress. Results The mean level of psychological distress among urban residents was 17.2. Recipients of disability, social assistance or unemployment benefits reported higher psychological distress (β = 5.6, 95%CI 5.2 to 5.9) than those in paid employment. Persons with some or great financial difficulties reported higher psychological distress (β = 3.4, 95%CI 3.2 to 3.6) than those with little or no financial problems. Socio-demographic factors were also associated with psychological distress, albeit with much lower influence. Living in a neighborhood with high social cohesion instead of low social cohesion was associated with a lower psychological distress of 22% among recipients of disability, social assistance or unemployment benefits and of 13% among citizens with financial difficulties. Conclusions Residing in socially cohesive neighborhoods may reduce the influence of lack of paid employment and financial difficulties on psychological distress among urban adults. Urban policies aimed at improving neighborhood social cohesion may contribute to decreasing socio-economic inequalities in mental health. PMID:27280601

  8. Racial/Ethnic Differences in Associations Between Neighborhood Social Cohesion and Meeting Physical Activity Guidelines, United States, 2013–2014

    PubMed Central

    Trinh-Shevrin, Chau; Yen, Irene H.; Kwon, Simona C.

    2016-01-01

    Introduction Neighborhood factors are increasingly recognized as determinants of health. Neighborhood social cohesion may be associated with physical activity, but previous studies examined data aggregated across racial/ethnic groups. We assessed whether neighborhood social cohesion was associated with physical activity in a nationally representative data set and explored the role of race/ethnicity. Methods We combined National Health Interview Survey data from 2013 and 2014 (n = 64,754) and constructed a neighborhood social cohesion score by summing responses to 4 questions. The outcome of meeting aerobic physical activity guidelines was defined as 150 or more minutes per week of moderate activity or 75 or more minutes of vigorous activity. Multivariable models regressing physical activity on neighborhood social cohesion were adjusted for demographic factors; interaction analyses assessed effect modification by race/ethnicity. Results In adjusted analyses, a 1-unit increase in the neighborhood social cohesion score was associated with higher odds of meeting physical activity guidelines (odds ratio [OR], 1.04; 95% confidence interval [CI], 1.03–1.05). Neighborhood social cohesion and physical activity were associated among non-Hispanic white adults (OR, 1.30; 95% CI, 1.20–1.42) and Hispanic adults (OR, 1.18; 95% CI, 1.03–1.34]) but not among non-Hispanic black or Asian American adults (Chinese, Filipino, and Asian Indians). Conclusion Neighborhood social cohesion was associated with meeting physical activity guidelines in a nationally representative sample; this association may be most meaningful for non-Hispanic white and Hispanic populations. Additional studies are needed to identify neighborhood factors that help non-Hispanic black and Asian Americans to meet physical activity guidelines. PMID:27930284

  9. Racial/Ethnic Differences in Associations Between Neighborhood Social Cohesion and Meeting Physical Activity Guidelines, United States, 2013-2014.

    PubMed

    Yi, Stella S; Trinh-Shevrin, Chau; Yen, Irene H; Kwon, Simona C

    2016-12-08

    Neighborhood factors are increasingly recognized as determinants of health. Neighborhood social cohesion may be associated with physical activity, but previous studies examined data aggregated across racial/ethnic groups. We assessed whether neighborhood social cohesion was associated with physical activity in a nationally representative data set and explored the role of race/ethnicity. We combined National Health Interview Survey data from 2013 and 2014 (n = 64,754) and constructed a neighborhood social cohesion score by summing responses to 4 questions. The outcome of meeting aerobic physical activity guidelines was defined as 150 or more minutes per week of moderate activity or 75 or more minutes of vigorous activity. Multivariable models regressing physical activity on neighborhood social cohesion were adjusted for demographic factors; interaction analyses assessed effect modification by race/ethnicity. In adjusted analyses, a 1-unit increase in the neighborhood social cohesion score was associated with higher odds of meeting physical activity guidelines (odds ratio [OR], 1.04; 95% confidence interval [CI], 1.03-1.05). Neighborhood social cohesion and physical activity were associated among non-Hispanic white adults (OR, 1.30; 95% CI, 1.20-1.42) and Hispanic adults (OR, 1.18; 95% CI, 1.03-1.34]) but not among non-Hispanic black or Asian American adults (Chinese, Filipino, and Asian Indians). Neighborhood social cohesion was associated with meeting physical activity guidelines in a nationally representative sample; this association may be most meaningful for non-Hispanic white and Hispanic populations. Additional studies are needed to identify neighborhood factors that help non-Hispanic black and Asian Americans to meet physical activity guidelines.

  10. Submarine landslides triggered by destabilization of high-saturation hydrate anomalies

    NASA Astrophysics Data System (ADS)

    Handwerger, Alexander L.; Rempel, Alan W.; Skarbek, Rob M.

    2017-07-01

    Submarine landslides occur along continental margins at depths that often intersect the gas hydrate stability zone, prompting suggestions that slope stability may be affected by perturbations that arise from changes in hydrate stability. Here we develop a numerical model to identify the conditions under which the destabilization of hydrates results in slope failure. Specifically, we focus on high-saturation hydrate anomalies at fine-grained to coarse-grained stratigraphic boundaries that can transmit bridging stresses that decrease the effective stress at sediment contacts and disrupt normal sediment consolidation. We evaluate slope stability before and after hydrate destabilization. Hydrate anomalies act to significantly increase the overall slope stability due to large increases in effective cohesion. However, when hydrate anomalies destabilize there is a loss of cohesion and increase in effective stress that causes the sediment grains to rapidly consolidate and generate pore pressures that can either trigger immediate slope failure or weaken the surrounding sediment until the pore pressure diffuses away. In cases where failure does not occur, the sediment can remain weakened for months. In cases where failure does occur, we quantify landslide dynamics using a rate and state frictional model and find that landslides can display either slow or dynamic (i.e., catastrophic) motion depending on the rate-dependent properties, size of the stress perturbation, and the size of the slip patch relative to a critical nucleation length scale. Our results illustrate the fundamental mechanisms through which the destabilization of gas hydrates can pose a significant geohazard.

  11. Effects of vegetation and fecal pellets on the erodibility of cohesive sediments: Ganghwa tidal flat, west coast of Korea.

    PubMed

    Ha, Ho Kyung; Ha, Hun Jun; Seo, Jun Young; Choi, Sun Min

    2018-06-04

    Although the Korean tidal flats in the Yellow Sea have been highlighted as a typical macrotidal system, so far, there have been no measurements of the sediment erodibility and critical shear stress for erosion (τ ce ). Using the Gust erosion microcosm system, a series of field experiments has been conducted in the Ganghwa tidal flat to investigate quantitatively the effects of biogenic materials on the erodibility of intertidal cohesive sediments. Four representative sediment cores with different surficial conditions were analyzed to estimate the τ ce and eroded mass. Results show that τ ce of the "free" sediment bed not covered by any biogenic material on the Ganghwa tidal flat was in the range of 0.1-0.2 Pa, whereas the sediment bed partially covered by vegetation (Phragmites communis) or fecal pellets had enhanced τ ce up to 0.45-0.6 Pa. The physical presence of vegetation or fecal pellets contributed to protection of the sediment bed by blocking the turbulent energy. An inverse relationship between the organic matter included in the eroded mass and the applied shear stress was observed. This suggests that the organic matter enriched in a near-bed fluff layer is highly erodible, and the organic matter within the underlying sediment layer becomes depleted and less erodible with depth. Our study underlines the role of biogenic material in stabilizing the benthic sediment bed in the intertidal zone. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Atherosclerotic plaque delamination: Experiments and 2D finite element model to simulate plaque peeling in two strains of transgenic mice.

    PubMed

    Merei, Bilal; Badel, Pierre; Davis, Lindsey; Sutton, Michael A; Avril, Stéphane; Lessner, Susan M

    2017-03-01

    Finite element analyses using cohesive zone models (CZM) can be used to predict the fracture of atherosclerotic plaques but this requires setting appropriate values of the model parameters. In this study, material parameters of a CZM were identified for the first time on two groups of mice (ApoE -/- and ApoE -/- Col8 -/- ) using the measured force-displacement curves acquired during delamination tests. To this end, a 2D finite-element model of each plaque was solved using an explicit integration scheme. Each constituent of the plaque was modeled with a neo-Hookean strain energy density function and a CZM was used for the interface. The model parameters were calibrated by minimizing the quadratic deviation between the experimental force displacement curves and the model predictions. The elastic parameter of the plaque and the CZM interfacial parameter were successfully identified for a cohort of 11 mice. The results revealed that only the elastic parameter was significantly different between the two groups, ApoE -/- Col8 -/- plaques being less stiff than ApoE -/- plaques. Finally, this study demonstrated that a simple 2D finite element model with cohesive elements can reproduce fairly well the plaque peeling global response. Future work will focus on understanding the main biological determinants of regional and inter-individual variations of the material parameters used in the model. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. A multiscale model of distributed fracture and permeability in solids in all-round compression

    NASA Astrophysics Data System (ADS)

    De Bellis, Maria Laura; Della Vecchia, Gabriele; Ortiz, Michael; Pandolfi, Anna

    2017-07-01

    We present a microstructural model of permeability in fractured solids, where the fractures are described in terms of recursive families of parallel, equidistant cohesive faults. Faults originate upon the attainment of tensile or shear strength in the undamaged material. Secondary faults may form in a hierarchical organization, creating a complex network of connected fractures that modify the permeability of the solid. The undamaged solid may possess initial porosity and permeability. The particular geometry of the superposed micro-faults lends itself to an explicit analytical quantification of the porosity and permeability of the damaged material. The model is the finite kinematics version of a recently proposed porous material model, applied with success to the simulation of laboratory tests and excavation problems [De Bellis, M. L., Della Vecchia, G., Ortiz, M., Pandolfi, A., 2016. A linearized porous brittle damage material model with distributed frictional-cohesive faults. Engineering Geology 215, 10-24. Cited By 0. 10.1016/j.enggeo.2016.10.010]. The extension adds over and above the linearized kinematics version for problems characterized by large deformations localized in narrow zones, while the remainder of the solid undergoes small deformations, as typically observed in soil and rock mechanics problems. The approach is particularly appealing as a means of modeling a wide scope of engineering problems, ranging from the prevention of water or gas outburst into underground mines, to the prediction of the integrity of reservoirs for CO2 sequestration or hazardous waste storage, to hydraulic fracturing processes.

  14. [Effect of family cohesion, subjective happiness and other factors on death anxiety in Korean elders].

    PubMed

    Jo, Kae Hwa; Song, Byung Sook

    2012-10-01

    The purposes of this study were to explore the effects of family cohesion and subjective happiness on death anxiety of Korean elders and to identify other factors contributing to death anxiety. The participants were 280 elders who lived in P metropolitan city. Data were collected between November 5, 2011 and January 12, 2012 using the Short Portable Mental Status Questionnaire (SPMSQ), Family Cohesion Evaluation Scale, Subjective Happiness Scale, and Fear of Death Scale (FODS). Data were analyzed using the SPSS/WIN 19.0 program. Family cohesion, marital status, religious activity, perceived health status, and subjective happiness were included in the factors affecting death anxiety of Korean elders. These variables explained 50.1% of death anxiety. The results of the study indicate that these variables should be considered in developing nursing intervention programs to decrease death anxiety and increase family cohesion and subjective happiness for life integration in Korean elders.

  15. Great Expectations: How Role Expectations and Role Experiences Relate to Perceptions of Group Cohesion.

    PubMed

    Benson, Alex J; Eys, Mark A; Irving, P Gregory

    2016-04-01

    Many athletes experience a discrepancy between the roles they expect to fulfill and the roles they eventually occupy. Drawing from met expectations theory, we applied response surface methodology to examine how role expectations, in relation to role experiences, influence perceptions of group cohesion among Canadian Interuniversity Sport athletes (N = 153). On the basis of data from two time points, as athletes approached and exceeded their role contribution expectations, they reported higher perceptions of task cohesion. Furthermore, as athletes approached and exceeded their social involvement expectations, they reported higher perceptions of social cohesion. These response surface patterns-pertaining to task and social cohesion-were driven by the positive influence of role experiences. On the basis of the interplay between athletes' role experiences and their perception of the group environment, efforts to improve team dynamics may benefit from focusing on improving the quality of role experiences, in conjunction with developing realistic role expectations.

  16. Parents' Romantic Attachment Predicts Family Ritual Meaning and Family Cohesion Among Parents and Their Children With Cancer.

    PubMed

    Santos, Susana; Crespo, Carla; Canavarro, M Cristina; Kazak, Anne E

    2017-01-01

    Family functioning is associated with adaptation in pediatric illness. This study examines the role of parents’ relationships (specifically romantic attachment) as a predictor of family ritual meaning and family cohesion for parents and their children with cancer. The dyads, 58 partnered Portuguese parents and their children in treatment, reported on family ritual meaning and family cohesion at Time 1 (T1) and after 6 months (T2). Parents also completed the questionnaire assessing romantic attachment at T1. Parents’ avoidant attachment, but not anxious attachment, predicted lower family ritual meaning and family cohesion after 6 months. T2 family ritual meaning mediated the relationship between T1 avoidant attachment and T2 family cohesion. Parents’ avoidant attachment may have a negative effect on family functioning in parents and children. Clinical intervention to address avoidant attachment or/and to promote family ritual meaning may help strengthen family ties.

  17. Social cohesion and self-rated health among adults in South Africa: The moderating role of race.

    PubMed

    Olamijuwon, Emmanuel O; Odimegwu, Clifford O; De Wet, Nicole

    2018-05-01

    In African countries including South Africa, the nexus between social cohesion and health remains under-researched. Using data from the 2012 South African social attitudes survey with a sample of 1988 adults in South Africa aged 18 years or older, we used the collective efficacy theory by Sampson and colleagues to examine the relationship between social cohesion and self-rated health in an African sample. We also examined how this relationship differed by race. Results from the multivariate analysis after adjusting for covariates suggested that adults in the highest tertile of social cohesion were more likely to report moderate or good health compared to those in the lowest tertile. Sub-group analysis provided no evidence that the relationship was moderated by race. These findings corroborate prior evidence that social cohesion is important for improving the health of adults. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Neighborhood Social Cohesion and Prevalence of Hypertension and Diabetes in a South Asian Population.

    PubMed

    Lagisetty, Pooja A; Wen, Ming; Choi, Hwajung; Heisler, Michele; Kanaya, Alka M; Kandula, Namratha R

    2016-12-01

    South Asians have a high burden of cardiovascular disease compared to other racial/ethnic groups in the United States. Little has been done to evaluate how neighborhood environments may influence cardiovascular risk factors including hypertension and type 2 diabetes in this immigrant population. We evaluated the association of perceived neighborhood social cohesion with hypertension and type 2 diabetes among 906 South Asian adults who participated in the Mediators of Atherosclerosis in South Asians Living in America Study. Multivariable logistic regression adjusted for demographic, socioeconomic, psychosocial, and physiologic covariates. Subgroup analyses examined whether associations differed by gender. South Asian women living in neighborhoods with high social cohesion had 46 % reduced odds of having hypertension than those living in neighborhoods with low social cohesion (OR 0.54, 95 % CI 0.30-0.99). Future research should determine if leveraging neighborhood social cohesion prevents hypertension in South Asian women.

  19. Neighborhood Social Cohesion and Prevalence of Hypertension and Diabetes in a South Asian Population

    PubMed Central

    Lagisetty, Pooja A.; Wen, Ming; Choi, Hwajung; Heisler, Michele; Kanaya, Alka M.; Kandula, Namratha R.

    2016-01-01

    South Asians have a high burden of cardiovascular disease compared to other racial/ethnic groups in the United States. Little has been done to evaluate how neighborhood environments may influence cardiovascular risk factors including hypertension and type 2 diabetes in this immigrant population. We evaluated the association of perceived neighborhood social cohesion with hypertension and type 2 diabetes among 906 South Asian adults who participated in the Mediators of Atherosclerosis in South Asians Living in America (MASALA) Study. Multivariable logistic regression adjusted for demographic, socioeconomic, psychosocial, and physiologic covariates. Subgroup analyses examined whether associations differed by gender. South Asian women living in neighborhoods with high social cohesion had 46% reduced odds of having hypertension than those living in neighborhoods with low social cohesion (OR=0.54, 95% CI 0.30–0.99). Future research should determine if leveraging neighborhood social cohesion prevents hypertension in South Asian women. PMID:26527589

  20. Interface structure and mechanics between graphene and metal substrates: a first-principles study

    NASA Astrophysics Data System (ADS)

    Xu, Zhiping; Buehler, Markus J.

    2010-12-01

    Graphene is a fascinating material not only for technological applications, but also as a test bed for fundamental insights into condensed matter physics due to its unique two-dimensional structure. One of the most intriguing issues is the understanding of the properties of graphene and various substrate materials. In particular, the interfaces between graphene and metal substrates are of critical importance in applications of graphene in integrated electronics, as thermal materials, and in electromechanical devices. Here we investigate the structure and mechanical interactions at a graphene-metal interface through density functional theory (DFT)-based calculations. We focus on copper (111) and nickel (111) surfaces adhered to a monolayer of graphene, and find that their cohesive energy, strength and electronic structure correlate directly with their atomic geometry. Due to the strong coupling between open d-orbitals, the nickel-graphene interface has a much stronger cohesive energy with graphene than copper. We also find that the interface cohesive energy profile features a well-and-shoulder shape that cannot be captured by simple pair-wise models such as the Lennard-Jones potential. Our results provide a detailed understanding of the interfacial properties of graphene-metal systems, and help to predict the performance of graphene-based nanoelectronics and nanocomposites. The availability of structural and energetic data of graphene-metal interfaces could also be useful for the development of empirical force fields for molecular dynamics simulations.

  1. Effect of transition metal impurities on the strength of grain boundaries in vanadium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wu, Xuebang; Kong, Xiang-Shan; You, Yu-Wei

    2016-09-07

    Effects of 3d (Ti-Ni), 4d (Zr-Pd), and 5d (Hf-Pt) transition metal impurities on strength of two representative vanadium grain boundaries (GBs), symmetric Σ3(111) and asymmetric Σ5(210), were studied by first-principles calculations within the framework of the Rice-Wang thermodynamic model and within the computational tensile test. The desirable elements to increase the GB cohesion were predicted based on their segregation and strengthening behaviors across the different GB sites. It reveals that the elements Ti, Zr, Hf, Nb, and Ta are good choices for the GB cohesion enhancers. In addition, the GB strengthening by solutes is sensitive to the GB structures. Themore » elements Cr, Mn, Fe, Co, and Ni decrease the GB strength of the Σ3(111) GB but they can increase the cohesion of the Σ5(210) GB. Furthermore, the origin of Ti-induced change of the GB strength was uncovered by analyzing the atomic bonds and electronic structures as well as the tensile strength. This work provides a theoretical guidance to screen promising alloying elements in V-based materials with improved resistance to GB decohesion and also helps us to understand the formation mechanism of Ti-rich precipitates in the V-Cr-Ti alloys under neutron or ion irradiation environments.« less

  2. Modelling of Fluidised Geomaterials: The Case of the Aberfan and the Gypsum Tailings Impoundment Flowslides

    PubMed Central

    Dutto, Paola; Stickle, Miguel Martin; Pastor, Manuel; Manzanal, Diego; Yague, Angel; Moussavi Tayyebi, Saeid; Lin, Chuan; Elizalde, Maria Dolores

    2017-01-01

    The choice of a pure cohesive or a pure frictional viscoplastic model to represent the rheological behaviour of a flowslide is of paramount importance in order to obtain accurate results for real cases. The principal goal of the present work is to clarify the influence of the type of viscous model—pure cohesive versus pure frictional—with the numerical reproduction of two different real flowslides that occurred in 1966: the Aberfan flowslide and the Gypsum tailings impoundment flowslide. In the present work, a depth-integrated model based on the v-pw Biot–Zienkiewicz formulation, enhanced with a diffusion-like equation to account for the pore pressure evolution within the soil mass, is applied to both 1966 cases. For the Aberfan flowslide, a frictional viscous model based on Perzyna viscoplasticity is considered, while a pure cohesive viscous model (Bingham model) is considered for the case of the Gypsum flowslide. The numerical approach followed is the SPH method, which has been enriched by adding a 1D finite difference grid to each SPH node in order to improve the description of the pore water evolution in the propagating mixture. The results obtained by the performed simulations are in agreement with the documentation obtained through the UK National Archive (Aberfan flowslide) and the International Commission of large Dams (Gypsum flowslide). PMID:28772924

  3. Multi Resolution In-Situ Testing and Multiscale Simulation for Creep Fatigue Damage Analysis of Alloy 617

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Yongming; Oskay, Caglar

    This report outlines the research activities that were carried out for the integrated experimental and simulation investigation of creep-fatigue damage mechanism and life prediction of Nickel-based alloy, Inconel 617 at high temperatures (950° and 850°). First, a novel experimental design using a hybrid control technique is proposed. The newly developed experimental technique can generate different combinations of creep and fatigue damage by changing the experimental design parameters. Next, detailed imaging analysis and statistical data analysis are performed to quantify the failure mechanisms of the creep fatigue of alloy 617 at high temperatures. It is observed that the creep damage ismore » directly associated with the internal voids at the grain boundaries and the fatigue damage is directly related to the surface cracking. It is also observed that the classical time fraction approach does not has a good correlation with the experimental observed damage features. An effective time fraction parameter is seen to have an excellent correlation with the material microstructural damage. Thus, a new empirical damage interaction diagram is proposed based on the experimental observations. Following this, a macro level viscoplastic model coupled with damage is developed to simulate the stress/strain response under creep fatigue loadings. A damage rate function based on the hysteresis energy and creep energy is proposed to capture the softening behavior of the material and a good correlation with life prediction and material hysteresis behavior is observed. The simulation work is extended to include the microstructural heterogeneity. A crystal plasticity finite element model considering isothermal and large deformation conditions at the microstructural scale has been developed for fatigue, creep-fatigue as well as creep deformation and rupture at high temperature. The model considers collective dislocation glide and climb of the grains and progressive damage accumulation of the grain boundaries. The glide model incorporates a slip resistance evolution model that characterizes the solute-drag creep effects and can capture well the stress-strain and stress time response of fatigue and creep-fatigue tests at various strain ranges and hold times. In order to accurately capture the creep strains that accumulate particularly at relatively low stress levels, a dislocation climb model has been incorporated into the crystal plasticity modeling framework. The dislocation climb model parameters are calibrated and verified through experimental creep tests performed at 950°. In addition, a cohesive zone model has been fully implemented in the context of the crystal plasticity finite element model to capture the intergranular creep damage. The parameters of the cohesive zone model have been calibrated using available experimental data. The numerical simulations illustrate the capability of the proposed model in capturing damage initiation and growth under creep loads as compared to the experimental observations. The microscale analysis sheds light on the crack initiation sites and propagation patterns within the microstructure. The model is also utilized to investigate the hybrid-controlled creep-fatigue tests and has been found to capture reasonably well the stress-strain response with different hold times and hold stress magnitudes.« less

  4. Pier and contraction scour prediction in cohesive soils at selected bridges in Illinois

    USGS Publications Warehouse

    Straub, Timothy D.; Over, Thomas M.

    2010-01-01

    This report presents the results of testing the Scour Rate In Cohesive Soils-Erosion Function Apparatus (SRICOS-EFA) method for estimating scour depth of cohesive soils at 15 bridges in Illinois. The SRICOS-EFA method for complex pier and contraction scour in cohesive soils has two primary components. The first component includes the calculation of the maximum contraction and pier scour (Zmax). The second component is an integrated approach that considers a time factor, soil properties, and continued interaction between the contraction and pier scour (SRICOS runs). The SRICOS-EFA results were compared to scour prediction results for non-cohesive soils based on Hydraulic Engineering Circular No. 18 (HEC-18). On average, the HEC-18 method predicted higher scour depths than the SRICOS-EFA method. A reduction factor was determined for each HEC-18 result to make it match the maximum of three types of SRICOS run results. The unconfined compressive strength (Qu) for the soil was then matched with the reduction factor and the results were ranked in order of increasing Qu. Reduction factors were then grouped by Qu and applied to each bridge site and soil. These results, and comparison with the SRICOS Zmax calculation, show that less than half of the reduction-factor method values were the lowest estimate of scour; whereas, the Zmax method values were the lowest estimate for over half. A tiered approach to predicting pier and contraction scour was developed. There are four levels to this approach numbered in order of complexity, with the fourth level being a full SRICOS-EFA analysis. Levels 1 and 2 involve the reduction factors and Zmax calculation, and can be completed without EFA data. Level 3 requires some surrogate EFA data. Levels 3 and 4 require streamflow for input into SRICOS. Estimation techniques for both EFA surrogate data and streamflow data were developed.

  5. Cohesive finite element modeling of the delamination of HTPB binder and HMX crystals under tensile loading

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Walters, David J.; Luscher, Darby J.; Yeager, John D.

    Accurately modeling the mechanical behavior of the polymer binders and the degradation of interfaces between binder and crystal is important to science-based understanding of the macro-scale response of polymer bonded explosives. The paper presents a description of relatively a simple bi-crystal HMX-HTPB specimen and associated tensile loading experiment including computed tomography imaging, the pertinent constitutive theory, and details of numerical simulations used to infer the behavior of the material during the delamination process. Within this work, mechanical testing and direct numerical simulation of this relatively simple bi-crystal system enabled reasonable isolation of binder-crystal interface delamination, in which the effects ofmore » the complicated thermomechanical response of explosive crystals were minimized. Cohesive finite element modeling of the degradation and delamination of the interface between a modified HTPB binder and HMX crystals was used to reproduce observed results from tensile loading experiments on bi-crystal specimens. Several comparisons are made with experimental measurements in order to identify appropriate constitutive behavior of the binder and appropriate parameters for the cohesive traction-separation behavior of the crystal-binder interface. This research demonstrates the utility of directly modeling the delamination between binder and crystal within crystal-binder-crystal tensile specimen towards characterizing the behavior of these interfaces in a manner amenable to larger scale simulation of polycrystalline PBX materials. One critical aspect of this approach is micro computed tomography imaging conducted during the experiments, which enabled comparison of delamination patterns between the direct numerical simulation and actual specimen. In addition to optimizing the cohesive interface parameters, one important finding from this investigation is that understanding and representing the strain-hardening plasticity of HTPB binder is important within the context of using a cohesive traction-separation model for the delamination of a crystal-binder system.« less

  6. Cohesive finite element modeling of the delamination of HTPB binder and HMX crystals under tensile loading

    DOE PAGES

    Walters, David J.; Luscher, Darby J.; Yeager, John D.; ...

    2018-02-27

    Accurately modeling the mechanical behavior of the polymer binders and the degradation of interfaces between binder and crystal is important to science-based understanding of the macro-scale response of polymer bonded explosives. The paper presents a description of relatively a simple bi-crystal HMX-HTPB specimen and associated tensile loading experiment including computed tomography imaging, the pertinent constitutive theory, and details of numerical simulations used to infer the behavior of the material during the delamination process. Within this work, mechanical testing and direct numerical simulation of this relatively simple bi-crystal system enabled reasonable isolation of binder-crystal interface delamination, in which the effects ofmore » the complicated thermomechanical response of explosive crystals were minimized. Cohesive finite element modeling of the degradation and delamination of the interface between a modified HTPB binder and HMX crystals was used to reproduce observed results from tensile loading experiments on bi-crystal specimens. Several comparisons are made with experimental measurements in order to identify appropriate constitutive behavior of the binder and appropriate parameters for the cohesive traction-separation behavior of the crystal-binder interface. This research demonstrates the utility of directly modeling the delamination between binder and crystal within crystal-binder-crystal tensile specimen towards characterizing the behavior of these interfaces in a manner amenable to larger scale simulation of polycrystalline PBX materials. One critical aspect of this approach is micro computed tomography imaging conducted during the experiments, which enabled comparison of delamination patterns between the direct numerical simulation and actual specimen. In addition to optimizing the cohesive interface parameters, one important finding from this investigation is that understanding and representing the strain-hardening plasticity of HTPB binder is important within the context of using a cohesive traction-separation model for the delamination of a crystal-binder system.« less

  7. The Analysis of Soil Resistance During Screw Displacement Pile Installation

    NASA Astrophysics Data System (ADS)

    Krasinski, Adam

    2015-02-01

    The application of screw displacement piles (SDP) is still increasing due to their high efficiency and many advantages. However, one technological problem is a serious disadvantage of those piles. It relates to the generation of very high soil resistance during screw auger penetration, especially when piles are installed in non-cohesive soils. In many situations this problem causes difficulties in creating piles of designed length and diameter. It is necessary to find a proper method for prediction of soil resistance during screw pile installation. The analysis of screw resistances based on model and field tests is presented in the paper. The investigations were carried out as part of research project, financed by the Polish Ministry of Science and Higher Education. As a result of tests and analyses the empirical method for prediction of rotation resistance (torque) during screw auger penetration in non-cohesive subsoil based on CPT is proposed.

  8. A social network analysis of the goal scoring passing networks of the 2016 European Football Championships.

    PubMed

    Mclean, Scott; Salmon, Paul M; Gorman, Adam D; Stevens, Nicholas J; Solomon, Colin

    2018-02-01

    In the current study, social network analysis (SNA) and notational analysis (NA) methods were applied to examine the goal scoring passing networks (GSPN) for all goals scored at the 2016 European Football Championships. The aim of the study was to determine the GSPN characteristics for the overall tournament, between the group and knock out stages, and for the successful and unsuccessful teams. The study also used degree centrality (DC) metrics as a novel method to determine the relative contributions of the pitch locations involved in the GSPN. To determine changes in GSPN characteristics as a function of changing score line, the analysis considered the match status of the game when goals were scored. There were significant differences for SNA metrics as a function of match status, and for the DC metrics in the comparison of the different pitch locations. There were no differences in the SNA metrics for the GSPN between teams in the group and knock out stages, or between the successful and unsuccessful teams. The results indicate that the GSPN had low values for network density, cohesion, connections, and duration. The networks were direct in terms of pitch zones utilised, where 85% of the GSPN included passes that were played within zones or progressed through the zones towards the goal. SNA and NA metrics were significantly different as a function of changing match status. The current study adds to the previous research on goal scoring in football, and demonstrates a novel method to determine the prominent pitch zones involved in the GSPN. These results have implications for match analysis and the coaching process. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Improving Cohesion in L2 Writing: A Three-Strand Approach to Building Lexical Cohesion

    ERIC Educational Resources Information Center

    Johnson, Mark

    2017-01-01

    This article presents a three-strand approach to help L2 writers in English as a foreign language (EFL) and English as a second language (ESL) instructional contexts achieve greater cohesion in their written work. The approach focuses on (1) the analysis of authentic texts, (2) the development of productive vocabulary, and (3) information…

  10. Say More and Be More Coherent: How Text Elaboration and Cohesion Can Increase Writing Quality

    ERIC Educational Resources Information Center

    Crossley, Scott A.; McNamara, Danielle S.

    2016-01-01

    This study examines links between essay quality and text elaboration and text cohesion. For this study, 35 students wrote two essays (on two different prompts) and for each, were given 15 minutes to elaborate on their original text. An expert in discourse comprehension then modified the original and elaborated essays to increase cohesion,…

  11. Stability for Development, Development for Stability: The Relationship between Regional Organizations and Social Cohesion through the Lens of the EU and MERCOSUR

    ERIC Educational Resources Information Center

    Parton, Brent T.

    2011-01-01

    Strategies aiming to foster social cohesion seek to enhance predictability and trust among heterogeneous actors. Although undoubtedly nation-states remain the dominant context for examining social cohesion, in Europe and in South America, nation-states have formed regional organizations to support political stability and economic cooperation in a…

  12. Social Cohesion and the Labour Market: Societal Regimes of Civic Attitudes and Labour Market Regimes

    ERIC Educational Resources Information Center

    Dimeglio, Isabelle; Janmaat, Jan Germen; Mehaut, Philippe

    2013-01-01

    The aim of this paper is to test the connections between the indicators used in the literature on social cohesion, which usually reflect "general" values or behaviours, and indicators specific to a particular space, namely the labour market. A key question is the stability of the social cohesion's indicators when moving from a societal…

  13. Texture, Textuality and Political Discourse: A Study of Lexical Cohesion in Nigeria's President Goodluck Jonathan's Inaugural Address, May, 2011

    ERIC Educational Resources Information Center

    Enyi, Amaechi Uneke; Chitulu, Mark Ononiwu

    2015-01-01

    This study, entitled, "Texture and textuality in Political Discourse: A Study of Cohesive Devices in President Goodluck Jonathan's Inaugural Address-May, 2011" was an analysis of the lexical cohesive devices employed by Nigeria's President Goodluck Jonathan in crafting his May, 2011's Presidential Inaugural Address (PIA). Guided by the…

  14. Power Structure in the Peer Group: The Role of Classroom Cohesion and Hierarchy in Peer Acceptance and Rejection of Victimized and Aggressive Students

    ERIC Educational Resources Information Center

    Martín Babarro, Javier; Díaz-Aguado, María José; Martínez Arias, Rosario; Steglich, Christian

    2017-01-01

    This study addresses the interacting effects of classroom cohesion and hierarchy on the relationships between victimization and aggression with peer acceptance and rejection. Classroom cohesion and hierarchy were constructed from friendship nominations. Multilevel analysis conducted in a sample of seventh- and eighth-grade students from the…

  15. Reconsidering Social Cohesion: Developing a Definition and Analytical Framework for Empirical Research

    ERIC Educational Resources Information Center

    Chan, Joseph; To, Ho-Pong; Chan, Elaine

    2006-01-01

    Despite its growing currency in academic and policy circles, social cohesion is a term in need of a clearer and more rigorous definition. This article provides a critical review of the ways social cohesion has been conceptualized in the literature in many cases, definitions are too loosely made, with a common confusion between the content and the…

  16. Measuring Social Cohesion: An Experiment Using the Canadian National Survey of Giving, Volunteering, and Participating

    ERIC Educational Resources Information Center

    Rajulton, Fernando; Ravanera, Zenaida R.; Beaujot, Roderic

    2007-01-01

    Social cohesion is a concept difficult to define and to measure. As there can be many definitions, so there can be many measurements. The main problem, either in defining or measuring the concept, is its multilevel and multidimensional nature. At one extreme, "country" is the most commonly used level to view social cohesion but…

  17. Construct Validation and Application of a Common Measure of Social Cohesion in 33 European Countries

    ERIC Educational Resources Information Center

    Dickes, Paul; Valentova, Marie; Borsenberger, Monique

    2010-01-01

    The aim of the paper is to assess the construct validation of a multidimensional measure of social cohesion which is well theoretically grounded and has an equivalent/comparable interpretation across all European countries. Up-to-now published research on social cohesion is deficient in either one or both of these important aspects. This paper…

  18. [Experiences of street harassment and associations with perceptions of social cohesion among women in Mexico City].

    PubMed

    Campos, Paola A; Falb, Kathryn L; Hernández, Sara; Díaz-Olavarrieta, Claudia; Gupta, Jhumka

    2017-01-01

    To document the frequency and forms of street harassment and examine the association between street harassment experiences and perceptions of social cohesion. Baseline survey data collected among women seeking care in public health clinics in Mexico City were used for analysis. Nearly two-thirds (62.8%) of women reported experiencing some form of street harassment in the prior month; women with street harassment experiences reported significantly lower perceived social cohesion (b=-0.46; 95%CI: -0.69,-0.22). Findings indicate reducing street harassment may have important implications for improving women's perceived social cohesion and their safety in Mexico City.

  19. Neighborhood cohesion, neighborhood disorder, and cardiometabolic risk.

    PubMed

    Robinette, Jennifer W; Charles, Susan T; Gruenewald, Tara L

    2018-02-01

    Perceptions of neighborhood disorder (trash, vandalism) and cohesion (neighbors trust one another) are related to residents' health. Affective and behavioral factors have been identified, but often in studies using geographically select samples. We use a nationally representative sample (n = 9032) of United States older adults from the Health and Retirement Study to examine cardiometabolic risk in relation to perceptions of neighborhood cohesion and disorder. Lower cohesion is significantly related to greater cardiometabolic risk in 2006/2008 and predicts greater risk four years later (2010/2012). The longitudinal relation is partially accounted for by anxiety and physical activity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Productive aging via volunteering: Does social cohesion influence level of engagement?

    PubMed

    Johnson, Kimberly J; Latham-Mintus, Kenzie; Poey, Judith L

    2018-04-26

    This study investigated whether neighborhood social cohesion influenced volunteer intensity over two years. The sample was drawn from Health and Retirement Study respondents who completed the 2010 or 2012 Psychosocial and Lifestyle Questionnaire (n = 12,929). Results showed that compared to nonvolunteers, a one-unit increase in neighborhood social cohesion increased the odds of moderate (OR: 1.07, p < .05) and high volunteering (OR: 1.10, p < .001). However, other productive roles, social contact, and education were significant in distinguishing high intensity from moderate volunteering while neighborhood social cohesion was not. Social workers should consider the neighborhood environment when recruiting volunteers.

Top