10 CFR Appendix B to Part 73 - General Criteria for Security Personnel

Code of Federal Regulations, 2014 CFR

2014-01-01

...-force exercises. (2) Licensee scenarios must be designed to test and challenge any components or... or pass an equivalent performance examination designed to measure basic job-related mathematical... administered by a licensed physician. The examination shall be designed to measure the individual's physical...

Wake County Public School System Design Guidelines.

ERIC Educational Resources Information Center

Wake County Public School System, Raleigh, NC.

The Wake County Public School System has published its guidelines for planning and design of functional, cost effective, and durable educational facilities that are attractive and enhance the students' educational experience. The guidelines present basic planning requirement and design criteria for the entire construction process, including: codes…

Design Criteria for Deflection Capacity of Conventionally reinforced Concrete Slabs. Phase III. Summary of Design Criteria and Design and Construction Details - Design Examples.

DTIC Science & Technology

1980-10-01

34 * M 0 0 rn a____ ______ I 𔃾 oa to 0 3 ji __1 .41 .. LL U9~ .1 4 0 -P_ 104 In 41 𔃾 C3 ) oY uo 0 1 P !Eo’a 020 Vi-4 1411313 3SdV-11O3 iN31dIONI -20...basic development length for Grade 60 hooked reinforcement, Rhb is given by: 960 db 2 hb 9 d (in.) (3-4) c Effects of yield stress of reinforcement

Study of metallic structural design concepts for an arrow wing supersonic cruise configuration

NASA Technical Reports Server (NTRS)

Turner, M. J.; Grande, D. L.

1977-01-01

A structural design study was made, to assess the relative merits of various metallic structural concepts and materials for an advanced supersonic aircraft cruising at Mach 2.7. Preliminary studies were made to ensure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, select structural concepts and materials, and define an efficient structural arrangement. An advanced computerized structural design system was used, in conjunction with a relatively large, complex finite element model, for detailed analysis and sizing of structural members to satisfy strength and flutter criteria. A baseline aircraft design was developed for assessment of current technology. Criteria, analysis methods, and results are presented. The effect on design methods of using the computerized structural design system was appraised, and recommendations are presented concerning further development of design tools, development of materials and structural concepts, and research on basic technology.

Design Guidelines for In-Plane Mechanical Properties of SiC Fiber-Reinforced Melt-Infiltrated SiC Composites

NASA Technical Reports Server (NTRS)

Morscher, Gregory N.; Pujar, Vijay V.

2008-01-01

In-plane tensile stress-strain, tensile creep, and after-creep retained tensile properties of melt-infiltrated SiC-SiC composites reinforced with different fiber types were evaluated with an emphasis on obtaining simple or first-order microstructural design guidelines for these in-plane mechanical properties. Using the mini-matrix approach to model stress-strain behavior and the results of this study, three basic general design criteria for stress and strain limits are formulated, namely a design stress limit, a design total strain limit, and an after-creep design retained strength limit. It is shown that these criteria can be useful for designing components for high temperature applications.

Evaluation on Living Public Spaces and Their Qualities - Case Study from Ankara Konur, Karanfil and Yüksel Streets

NASA Astrophysics Data System (ADS)

Gürer, Nilüfer; Imren Güzel, Burcu; Kavak, Ibrahim

2017-10-01

Public spaces constitute one of the main elements of the living cities. They stand out as places reflecting the social structure of the society and the past values. They appear as the places one can observe the changes and modernity of the society as well as socializing places. Following to private and semi-private spaces, public spaces such as streets, squares and parks provide people a chance to be together and contact with each other. In living and vibrant places with these random appointments they feel that they belong to social urban life. Therefore, well-designed living public spaces are important indicators of the quality of life and user satisfaction. In the scope of this paper the basic principles and design criteria that create living public spaces and their effects on user satisfaction are discussed. By analysing the spatial reflections of used design criteria it is aimed to relate the existing arrangements to user satisfaction. For these analysis, Yüksel Street located at Kızılay Square in Ankara centre and side streets of Karanfil and Konur (all car-free) were selected as case study area. This area is one of the most important and most densely used pedestrian zone of the capital with its green pattern, location and crossroads. At the beginning, basic design criteria and implementation methods are detailed with the literature survey. Then basic criteria and design principles are verified by using field studies including a survey with randomly asked 270 questionnaires. For defining the user satisfaction and bringing out the qualifications and failures in the case study area user surveys are analysed by field study observations and SPSS Statistics software. Finally, practical suggestions which are believed to be useful for this type of public places in developing and less developed countries are proposed

The Relationship of School Design to Academic Achievement of Elementary School Children.

ERIC Educational Resources Information Center

Yarbrough, Kathleen Ann

This study sought to determine if there are relationships between student achievement and educational facilities. It focused on the question: Does school design influence the academic achievement of elementary school students? Criteria used were scores on the Iowa Test of Basic Skills and 86 variables describing design patterns in various…

Process Design Manual for Land Treatment of Municipal Wastewater.

ERIC Educational Resources Information Center

Crites, R.; And Others

This manual presents a procedure for the design of land treatment systems. Slow rate, rapid infiltration, and overland flow processes for the treatment of municipal wastewaters are given emphasis. The basic unit operations and unit processes are discussed in detail, and the design concepts and criteria are presented. The manual includes design…

34 CFR 491.21 - What selection criteria does the Secretary use?

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Support services must be designed to bring members of the target group to a state of readiness for... application to determine the extent to which— (1) The program design is tailored to the literacy and basic skills needs of the specific homeless population being served (for example, designs to address the...

Giant Magnetoresistance: Basic Concepts, Microstructure, Magnetic Interactions and Applications

PubMed Central

Ennen, Inga; Kappe, Daniel; Rempel, Thomas; Glenske, Claudia; Hütten, Andreas

2016-01-01

The giant magnetoresistance (GMR) effect is a very basic phenomenon that occurs in magnetic materials ranging from nanoparticles over multilayered thin films to permanent magnets. In this contribution, we first focus on the links between effect characteristic and underlying microstructure. Thereafter, we discuss design criteria for GMR-sensor applications covering automotive, biosensors as well as nanoparticular sensors. PMID:27322277

Space tug point design study. Volume 2: Operations, performance and requirements

NASA Technical Reports Server (NTRS)

1973-01-01

A design study to determine the configuration and characteristics of a space tug was conducted. Among the subjects analyzed in the study are: (1) flight and ground operations, (2) vehicle flight performance and performance enhancement techniques, (3) flight requirements, (4) basic design criteria, and (5) functional and procedural interface requirements between the tug and other systems.

Good Practice Recommendations in the Field of Heating, Ventilation, and Air Conditioning for Health Related Research Laboratories.

ERIC Educational Resources Information Center

Laboratory Design Notes, 1966

1966-01-01

A collection of laboratory design notes to set forth minimum criteria required in the design of basic medical research laboratory buildings. Recommendations contained are primarily concerned with features of design which affect quality of performance and future flexibility of facility systems. Subjects of economy and safety are discussed where…

Applications of EVA guidelines and design criteria. Volume 3: EVA systems cost model formating

NASA Technical Reports Server (NTRS)

Brown, N. E.

1973-01-01

The development of a model for estimating the impact of manned EVA costs on future payloads is discussed. Basic information on the EV crewman requirements, equipment, physical and operational characteristics, and vehicle interfaces is provided. The cost model is being designed to allow system designers to quantify the impact of EVA on vehicle and payload systems.

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Cable television basic signal leakage... television basic signal leakage performance criteria. (a) No cable television system shall commence or... one of the following cable television basic signal leakage performance criteria: (1) prior to carriage...

Resource Guide: Selected Early Childhood/Early Intervention Training Materials. 9th Edition. Systems Change in Personnel Preparation.

ERIC Educational Resources Information Center

Catlett, Camille, Ed.; Winton, Pamela J., Ed.

This resource guide identifies and describes early childhood education teaching, training, and staff development materials that meet three basic criteria: good, readily available, and inexpensive. It is designed to provide educators, trainers, supervisors, and other personnel preparation decision makers with resources for designing quality…

A new conceptual design approach for habitative space modules

NASA Astrophysics Data System (ADS)

Burattini, C.; Bisegna, F.; Gugliermetti, F.; Marchetti, M.

2014-04-01

Existing Space modules were designed to meet the standards established by NASA, basically oriented to functionality. In future Space environments a high level of habitability in long duration missions will become a priority: besides comfort and ergonomics, these habitats will require the application of criteria to address human needs for living in confined environments.

Visual Design Principles Applied To World Wide Web Construction.

ERIC Educational Resources Information Center

Luck, Donald D.; Hunter, J. Mark

This paper describes basic types of World Wide Web pages and presents design criteria for page layout based on principles of visual literacy. Discussion focuses on pages that present information in the following styles: billboard; directory/index; textual; and graphics. Problems and solutions in Web page construction are explored according to…

Designing future landscapes from principles of form and function

Treesearch

Larry D. Harris; Patrick Kangas

1979-01-01

Future landscapes will consist of a gradient of types ranging from wilderness areas to totally "humanized" environments. The man-dominated landscapes will be required to fulfill multiple functions only one of which is aesthetic enjoyment. It is suggested that basic principles of form and function may contribute to design criteria. Applications to the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U. S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides all the information necessary tomore » access the DSPA programs, to input required data and to generate appropriate Design Synthesis or Performance Analysis Output.« less

Management of Atopic Dermatitis in Japan.

PubMed

Saeki, Hidehisa

2017-01-01

The guidelines for the treatment of atopic dermatitis (AD) issued by the Japanese Dermatological Association (JDA), which are basically designed for dermatologists, were first prepared in 2000 and revised in 2016. The guidelines for AD of the Japanese Society of Allergology (JSA), which are basically designed for allergologists, including internists, otorhinolaryngologists, ophthalmologists, and dermatologists, were first prepared in 2009 and revised in 2014. In this article, I review the definition, pathophysiology, etiology, epidemiology, diagnosis, severity classification, examination for diagnosis and severity assessment, and treatments for AD in Japan according to these two guidelines for AD (JDA and JSA). Based on the definition and diagnostic criteria for AD of the JDA, patients meeting three basic criteria, 1) pruritus, 2) typical morphology and distribution of the eczema, and 3) chronic or chronically relapsing course, are regarded as having AD. Treatment measures for AD basically consist of drug therapy, skin care, and elimination of exacerbating factors. Drugs that potently reduce AD-related inflammation in the skin are topical corticosteroids and tacrolimus. It is most important to promptly and accurately reduce inflammation related to AD by using these topical anti-inflammatory drugs. Proactive therapy refers to a treatment method in which, after inducing remission, a topical corticosteroid or tacrolimus ointment is intermittently applied to the skin in addition to skin care with moisturizers in order to maintain remission.

A CONTROLLED BIOASSAY SYSTEM FOR MEASURING TOXICITY OF HEAVY METALS

EPA Science Inventory

Biological availability of metal micronutrients and metal toxicity are believed to be dependent on metal oxidation state, complexation, and solubility as well as the physicochemical characteristics of the aqueous phase. Basic design criteria for fish bioassays which are capable o...

Study and design of cryogenic propellant acquisition systems. Volume 2: Supporting experimental program

NASA Technical Reports Server (NTRS)

Burge, G. W.; Blackmon, J. B.

1973-01-01

Areas of cryogenic fuel systems were identified where critical experimental information was needed either to define a design criteria or to establish the feasibility of a design concept or a critical aspect of a particular design. Such data requirements fell into three broad categories: (1) basic surface tension screen characteristics; (2) screen acquisition device fabrication problems; and (3) screen surface tension device operational failure modes. To explore these problems and to establish design criteria where possible, extensive laboratory or bench test scale experiments were conducted. In general, these proved to be quite successful and, in many instances, the test results were directly used in the system design analyses and development. In some cases, particularly those relating to operational-type problems, areas requiring future research were identified, especially screen heat transfer and vibrational effects.

Basic design considerations for free-electron lasers driven by electron beams from RF accelerators

NASA Astrophysics Data System (ADS)

Gover, A.; Freund, H.; Granatstein, V. L.; McAdoo, J. H.; Tang, C.-M.

A design procedure and design criteria are derived for free-electron lasers driven by electron beams from RF accelerators. The procedure and criteria permit an estimate of the oscillation-buildup time and the laser output power of various FEL schemes: with waveguide resonator or open resonator, with initial seed-radiation injection or with spontaneous-emission radiation source, with a linear wiggler or with a helical wiggler. Expressions are derived for computing the various FEL parameters, allowing for the design and optimization of the FEL operational characteristics under ideal conditions or with nonideal design parameters that may be limited by technological or practical constraints. The design procedure enables one to derive engineering curves and scaling laws for the FEL operating parameters. This can be done most conveniently with a computer program based on flowcharts given in the appendices.

Design study of a continuously variable roller cone traction CVT for electric vehicles

NASA Technical Reports Server (NTRS)

Mccoin, D. K.; Walker, R. D.

1980-01-01

Continuously variable ratio transmissions (CVT) featuring cone and roller traction elements and computerized controls are studied. The CVT meets or exceeds all requirements set forth in the design criteria. Further, a scalability analysis indicates the basic concept is applicable to lower and higher power units, with upward scaling for increased power being more readily accomplished.

Multi-Criteria Approach in Multifunctional Building Design Process

NASA Astrophysics Data System (ADS)

Gerigk, Mateusz

2017-10-01

The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

Advanced composite elevator for Boeing 727 aircraft. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

Chovil, D. V.; Harvey, S. T.; Mccarty, J. E.; Desper, O. E.; Jamison, E. S.; Syder, H.

1981-01-01

The design, development, analysis, and testing activities and results that were required to produce five and one-half shipsets of advanced composite elevators for Boeing 727 aircraft are summarized. During the preliminary design period, alternative concepts were developed. After selection of the best design, detail design and basic configuration improvements were evaluated. Five and one-half shipsets were manufactured. All program goals (except competitive cost demonstration) were accomplished when our design met or exceeded all requirements, criteria, and objectives.

Organizing for low cost space transportation

NASA Technical Reports Server (NTRS)

Lee, C. M.

1977-01-01

The paper describes the management concepts and organizational structure NASA is establishing to operate the Space Transportation System. Policies which would encourage public and commercial organizations and private individuals to use the new STS are discussed, and design criteria for experiments, spacecraft, and other systems elements are considered. The design criteria are intented to facilitate cost reductions for space operations. NASA plans for the transition from currently used expendable launch vehicles to Shuttle use and Shuttle pricing policies are explained in detail. Hardware development is basically complete, management functions have been defined, pricing policies have been published, and procedures for user contact and services have been places into operation.

Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

NASA Technical Reports Server (NTRS)

Goltz, G.; Kaiser, L. M.; Weiner, H.

1977-01-01

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

Electronic circuits for communications systems: A compilation

NASA Technical Reports Server (NTRS)

1972-01-01

The compilation of electronic circuits for communications systems is divided into thirteen basic categories, each representing an area of circuit design and application. The compilation items are moderately complex and, as such, would appeal to the applications engineer. However, the rationale for the selection criteria was tailored so that the circuits would reflect fundamental design principles and applications, with an additional requirement for simplicity whenever possible.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides a detailed description of the DSPAmore » Computer Program system and its subprograms. This manual will assist the programmer in revising or updating the several subprograms.« less

State of Alaska Fire Service Training. Instructor Certification Standards.

ERIC Educational Resources Information Center

Hagevig, William

Designed for local Alaskan fire departments, this pamphlet provides the criteria and qualifications for certificates of firefighter instructors (basic, advanced, master), a list of approved subject categories for each level of certification, sample certification applications, a list of resource publications, and a training course outline (basic…

An analytical study for the design of advanced rotor airfoils

NASA Technical Reports Server (NTRS)

Kemp, L. D.

1973-01-01

A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

Application of a framework to assess the usefulness of alternative sepsis criteria

PubMed Central

Seymour, Christopher W.; Coopersmith, Craig M.; Deutschman, Clifford S; Gesten, Foster; Klompas, Michael; Levy, Mitchell; Martin, Gregory S.; Osborn, Tiffany M.; Rhee, Chanu; Warren, David; Watson, R. Scott; Angus, Derek C.

2016-01-01

The current definition for sepsis is life-threatening, acute organ dysfunction secondary to a dysregulated host response to infection. Criteria to operationalize this definition can be judged by 6 domains of usefulness (reliability; content, construct and criterion validity, measurement burden, and timeliness). The relative importance of these 6 domains depends on the intended purpose for the criteria (clinical care, basic and clinical research, surveillance, or quality improvement (QI) and audit). For example, criteria for clinical care should have high content and construct validity, timeliness, and low measurement burden to facilitate prompt care. Criteria for surveillance or QI/audit place greater emphasis on reliability across individuals and sites and lower emphasis on timeliness. Criteria for clinical trials require timeliness to ensure prompt enrollment and reasonable reliability but can tolerate high measurement burden. Basic research also tolerates high measurement burden and may not need stability over time. In an illustrative case study, we compared examples of criteria designed for clinical care, surveillance and QI/audit among 396,241 patients admitted to 12 academic and community hospitals in an integrated health system. Case rates differed 4-fold and mortality 3-fold. Predictably, clinical care criteria, which emphasized timeliness and low burden and therefore used vital signs and routine laboratory tests, had the highest case identification with lowest mortality. QI /audit criteria, which emphasized reliability and criterion validity, used discharge information and had the lowest case identification with highest mortality. Using this framework to identify the purpose and apply domains of usefulness can help with the evaluation of existing sepsis diagnostic criteria and provide a roadmap for future work. PMID:26901560

Application of a Framework to Assess the Usefulness of Alternative Sepsis Criteria.

PubMed

Seymour, Christopher W; Coopersmith, Craig M; Deutschman, Clifford S; Gesten, Foster; Klompas, Michael; Levy, Mitchell; Martin, Gregory S; Osborn, Tiffany M; Rhee, Chanu; Warren, David K; Watson, R Scott; Angus, Derek C

2016-03-01

The current definition of sepsis is life-threatening, acute organ dysfunction secondary to a dysregulated host response to infection. Criteria to operationalize this definition can be judged by six domains of usefulness (reliability, content, construct and criterion validity, measurement burden, and timeliness). The relative importance of these six domains depends on the intended purpose for the criteria (clinical care, basic and clinical research, surveillance, or quality improvement [QI] and audit). For example, criteria for clinical care should have high content and construct validity, timeliness, and low measurement burden to facilitate prompt care. Criteria for surveillance or QI/audit place greater emphasis on reliability across individuals and sites and lower emphasis on timeliness. Criteria for clinical trials require timeliness to ensure prompt enrollment and reasonable reliability but can tolerate high measurement burden. Basic research also tolerates high measurement burden and may not need stability over time. In an illustrative case study, we compared examples of criteria designed for clinical care, surveillance and QI/audit among 396,241 patients admitted to 12 academic and community hospitals in an integrated health system. Case rates differed four-fold and mortality three-fold. Predictably, clinical care criteria, which emphasized timeliness and low burden and therefore used vital signs and routine laboratory tests, had the greater case identification with lowest mortality. QI/audit criteria, which emphasized reliability and criterion validity, used discharge information and had the lowest case identification with highest mortality. Using this framework to identify the purpose and apply domains of usefulness can help with the evaluation of existing sepsis diagnostic criteria and provide a roadmap for future work.

Strategies for Assessment of the Basic Undergraduate Interpersonal Communication Course.

ERIC Educational Resources Information Center

Ratliffe, Sharon A.

Golden West College's (GWC's) Interpersonal Communication course was designed to help students develop communication skills, understand the criteria used in selecting the most appropriate way to communicate, implement these choices effectively through verbal and nonverbal means, and evaluate the effectiveness of these choices. Students learn the…

25 CFR 36.70 - What terms do I need to know?

Code of Federal Regulations, 2010 CFR

2010-04-01

... BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs § 36.70 What... Program means a homeliving based service designed to decrease barriers to learning or increase positive...

Indexing and Metatag Schemes for Web-Based Information Retrieval.

ERIC Educational Resources Information Center

Torok, Andrew G.

This paper reviews indexing theory and suggests that information retrieval can be significantly improved by applying basic indexing criteria. Indexing practices are described, including the three main types of indexes: pre-coordinate, post-coordinate, and variants of both. Design features of indexes are summarized, including accuracy, consistency,…

Objective Criteria for the Selection of Software.

ERIC Educational Resources Information Center

Burk, Laurena

The seven stages in the system development process are discussed in the context of implementing basic arithmetic drill and practice exercises on a computer-based system: (1) feasibility study; (2) requirements definition; (3) alternative specifications; (4) evaluation and selection of an alternative; (5) system design; (6) development and testing;…

Presenting an evaluation model of the trauma registry software.

PubMed

Asadi, Farkhondeh; Paydar, Somayeh

2018-04-01

Trauma is a major cause of 10% death in the worldwide and is considered as a global concern. This problem has made healthcare policy makers and managers to adopt a basic strategy in this context. Trauma registry has an important and basic role in decreasing the mortality and the disabilities due to injuries resulted from trauma. Today, different software are designed for trauma registry. Evaluation of this software improves management, increases efficiency and effectiveness of these systems. Therefore, the aim of this study is to present an evaluation model for trauma registry software. The present study is an applied research. In this study, general and specific criteria of trauma registry software were identified by reviewing literature including books, articles, scientific documents, valid websites and related software in this domain. According to general and specific criteria and related software, a model for evaluating trauma registry software was proposed. Based on the proposed model, a checklist designed and its validity and reliability evaluated. Mentioned model by using of the Delphi technique presented to 12 experts and specialists. To analyze the results, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved by the experts and professionals, the final version of the evaluation model for the trauma registry software was presented. For evaluating of criteria of trauma registry software, two groups were presented: 1- General criteria, 2- Specific criteria. General criteria of trauma registry software were classified into four main categories including: 1- usability, 2- security, 3- maintainability, and 4-interoperability. Specific criteria were divided into four main categories including: 1- data submission and entry, 2- reporting, 3- quality control, 4- decision and research support. The presented model in this research has introduced important general and specific criteria of trauma registry software and sub criteria related to each main criteria separately. This model was validated by experts in this field. Therefore, this model can be used as a comprehensive model and a standard evaluation tool for measuring efficiency and effectiveness and performance improvement of trauma registry software. Copyright © 2018 Elsevier B.V. All rights reserved.

100-kW hingeless metal wind turbine blade design, analysis and fabrication

NASA Technical Reports Server (NTRS)

Donham, R. E.; Schmidt, J.; Linscott, B. S.

1975-01-01

The design, fabrication and analysis of aluminum wind turbine rotor blades is discussed. The blades are designed to meet criteria established for a 100-kilowatt wind turbine generator operating between 8 and 60-mile-per-hour speeds at 40 revolutions per minute. The design wind speed is 18 miles per hour. Two rotor blades are used on a new facility which includes a hingeless hub and its shaft, gearbox, generator and tower. Experience shows that, for stopped rotors, safe wind speeds are strongly dependent on blade torsional and bending rigidities which the basic D spar structural blade design provides. The 0.25-inch-thick nose skin is brake/bump formed to provide the basic 'D' spar structure for the tapered, twisted blades. Adequate margins for flutter and divergence are predicted from the use of existing, correlated stopped rotor and helicopter rotor analysis programs.

Basic materials and structures aspects for hypersonic transport vehicles (HTV)

NASA Astrophysics Data System (ADS)

Steinheil, E.; Uhse, W.

A Mach 5 transport design is used to illustrate structural concepts and criteria for materials selections and also key technologies that must be followed in the areas of computational methods, materials and construction methods. Aside from the primary criteria of low weight, low costs, and conceivable risks, a number of additional requirements must be met, including stiffness and strength, corrosion resistance, durability, and a construction adequate for inspection, maintenance and repair. Current aircraft construction requirements are significantly extended for hypersonic vehicles. Additional consideration is given to long-duration temperature resistance of the airframe structure, the integration of large-volume cryogenic fuel tanks, computational tools, structural design, polymer matrix composites, and advanced manufacturing technologies.

Design criteria for noncoherent Gaussian channels with MFSK signaling and coding

NASA Technical Reports Server (NTRS)

Butman, S. A.; Levitt, B. K.; Bar-David, I.; Lyon, R. F.; Klass, M. J.

1976-01-01

This paper presents data and criteria to assess and guide the design of modems for coded noncoherent communication systems subject to practical system constraints of power, bandwidth, noise spectral density, coherence time, and number of orthogonal signals M. Three basic receiver types are analyzed for the noncoherent multifrequency-shift keying (MFSK) additive white Gaussian noise channel: hard decision, unquantized (optimum), and quantized (soft decision). Channel capacity and computational cutoff rate are computed for each type and presented as functions of the predetection signal-to-noise ratio and the number of orthogonal signals. This relates the channel constraints of power, bandwidth, coherence time, and noise power to the optimum choice of signal duration and signal number.

Resource Guide: Selected Early Childhood/Early Intervention Training Materials. 10th Edition.

ERIC Educational Resources Information Center

Catlett, Camille, Comp.; Winton, Pamela J., Comp.

The purpose of this resource guide is to identify and describe teaching, training, and staff development materials that meet three basic criteria: they are good, they are readily available, and they are inexpensive. These resources may assist educators, trainers, supervisors, and other personnel preparation decisionmakers in designing quality…

Theoretical study of network design methodologies for the aerial relay system. [energy consumption and air traffic control

NASA Technical Reports Server (NTRS)

Rivera, J. M.; Simpson, R. W.

1980-01-01

The aerial relay system network design problem is discussed. A generalized branch and bound based algorithm is developed which can consider a variety of optimization criteria, such as minimum passenger travel time and minimum liner and feeder operating costs. The algorithm, although efficient, is basically useful for small size networks, due to its nature of exponentially increasing computation time with the number of variables.

Does Maltreatment Beget Maltreatment? A Systematic Review of the Intergenerational Literature

PubMed Central

Thornberry, Terence P.; Knight, Kelly E.; Lovegrove, Peter J.

2014-01-01

In this paper, we critically review the literature testing the cycle of maltreatment hypothesis which posits continuity in maltreatment across adjacent generations. That is, we examine whether a history of maltreatment victimization is a significant risk factor for the later perpetration of maltreatment. We begin by establishing 11 methodological criteria that studies testing this hypothesis should meet. They include such basic standards as using representative samples, valid and reliable measures, prospective designs, and different reporters for each generation. We identify 47 studies that investigated this issue and then evaluate them with regard to the 11 methodological criteria. Overall, most of these studies report findings consistent with the cycle of maltreatment hypothesis. Unfortunately, at the same time, few of them satisfy the basic methodological criteria that we established; indeed, even the stronger studies in this area only meet about half of them. Moreover, the methodologically stronger studies present mixed support for the hypothesis. As a result, the positive association often reported in the literature appears to be based largely on the methodologically weaker designs. Based on our systematic methodological review, we conclude that this small and methodologically weak body of literature does not provide a definitive test of the cycle of maltreatment hypothesis. We conclude that it is imperative to develop more robust and methodologically adequate assessments of this hypothesis to more accurately inform the development of prevention and treatment programs. PMID:22673145

Dosimetry of laser emission

NASA Astrophysics Data System (ADS)

Kirillov, A. I.; Morskov, V. F.; Ustinov, N. D.

The basic criteria for dosimetric standards on photon, microwave, and ultraviolet emissions are reviewed. Attention is given to the biophysical effects of laser radiation, approaches to the evaluation of optical radiation hazard, and the effect of laser beams on the human eye. The fundamentals of the optical design of dosimeters are discussed, and an eye model is developed for a laser radiation meter. The discussion also covers the design of the electronic circuit of dosimeters and an evaluation of measurement errors.

Answering the Call of the Web: UVA Crafts a Innovative Web Certification Program for Its Staff.

ERIC Educational Resources Information Center

Lee, Sandra T.

2000-01-01

Describes the development of a Web Certification Program at the University of Virginia. This program offers certificates at three levels: Web Basics, Web Designer, and Web Master. The paper focuses on: determination of criteria for awarding certificates; program status; program evaluation and program effectiveness; and future plans for the Web…

A Multidisciplinary Industrial Robot Approach for Teaching Mechatronics-Related Courses

ERIC Educational Resources Information Center

Garduño-Aparicio, Mariano; Rodríguez-Reséndiz, Juvenal; Macias-Bobadilla, Gonzalo; Thenozhi, Suresh

2018-01-01

This paper presents a robot prototype for an undergraduate laboratory program designed to fulfill the criteria laid out by ABET. The main objective of the program is for students to learn some basic concepts of embedded systems and robotics, and apply them in practice. For that purpose, various practical laboratory exercises were prepared to teach…

Design of a laboratory study of contaminant film darkening in space

NASA Astrophysics Data System (ADS)

Judeikis, H. S.; Arnold, G. S.; Hill, M.; Young Owl, R. C.; Hall, D. F.

This paper reports the philosophy, design, and initial results of a program aimed at improving control of the optical effects of contamination in the design of a spacecraft. The types of basic data needed to produce criteria for the selection of spacecraft material based on the effects of the contaminant films they produce are discussed. The results of a spacecraft nonmetallic materials list analysis and radiation sensitivity estimates are presented. A rationale is given for simulation analysis of the potential effects of the geosynchronous environment on organic contaminant films.

Framework and criteria for program evaluation in the Office of Conservation and Renewable Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study addresses the development of a framework and generic criteria for conducting program evaluation in the Office of Conservation and Renewable Energy. The evaluation process is intended to provide the Assistant Secretary with comprehensive and consistent evaluation data for management decisions regarding policy and strategy, crosscutting energy impacts and resource allocation and justification. The study defines evaluation objectives, identifies basic information requirements (criteria), and identifies a process for collecting evaluation results at the basic program level, integrating the results, and summarizing information upward through the CE organization to the Assistant Secretary. Methods are described by which initial criteria weremore » tested, analyzed, and refined for CE program applicability. General guidelines pertaining to evaluation and the Sunset Review requirements are examined and various types, designs, and models for evaluation are identified. Existing CE evaluation reports are reviewed and comments on their adequacy for meeting current needs are provided. An inventory and status survey of CE program evaluation activities is presented, as are issues, findings, and recommendations pertaining to CE evaluation and Sunset Review requirements. Also, sources of data for use in evaluation and the Sunset Review response are identified. An inventory of CE evaluation-related documents and reports is provided.« less

Habitability as a Tier One Criterion in Exploration Mission and Vehicle Design. Part 1; Habitability

NASA Technical Reports Server (NTRS)

Adams, Constance M.; McCurdy, Matthew Riegel

1999-01-01

Habitability and human factors are necessary criteria to include in the iterative process of Tier I mission design. Bringing these criteria in at the first, conceptual stage of design for exploration and other human-rated missions can greatly reduce mission development costs, raise the level of efficiency and viability, and improve the chances of success. In offering a rationale for this argument, the authors give an example of how the habitability expert can contribute to early mission and vehicle architecture by defining the formal implications of a habitable vehicle, assessing the viability of units already proposed for exploration missions on the basis of these criteria, and finally, by offering an optimal set of solutions for an example mission. In this, the first of three papers, we summarize the basic factors associated with habitability, delineate their formal implications for crew accommodations in a long-duration environment, and show examples of how these principles have been applied in two projects at NASA's Johnson Space Center: the BIO-Plex test facility, and TransHab.

MIL-H-8501B: Application to shipboard terminal operations

NASA Technical Reports Server (NTRS)

Cappetta, A. N.; Johns, J. B.

1993-01-01

The philosophy and structure of the proposed U.S. Military Specification for Handling Qualities Requirements for Military Rotorcraft, MIL-H-8501B, are presented with emphasis on shipboard terminal operations. The impact of current and future naval operational requirements on the selection of appropriate combinations of basic vehicle dynamics and usable cue environments are identified. An example 'walk through' of MIL-H-8501B is conducted from task identification to determination of stability and control requirements. For selected basic vehicle dynamics, criteria as a function of input/response magnitude are presented. Additionally, rotorcraft design development implications are discussed.

The basic characteristics of hybrid aircraft. [structural design criteria and weight analysis of airships for materials handling

NASA Technical Reports Server (NTRS)

Nichols, J. B.

1975-01-01

The transportation of very heavy or very bulky loads by airships, and the ability to carry out extended duration flights at low speeds and low costs was studied. Structural design and weight factors for airship construction are examined. The densities of various light gases to be used in airships are given, along with their lifting capacities. The aerodynamic characteristics of various airship configurations was studied. Propulsion system requirements for airships are briefly considered.

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Warning Signals: Basic Criteria for Tracking At-Risk Infants and Toddlers.

ERIC Educational Resources Information Center

Blackman, James

Developed by a multidisciplinary group (convened by Project Zero to Three) of 17 experts in the identification and evaluation of high risk infants and young children, this manual presents basic criteria for tracking at risk infants and toddlers. The first section answers such questions about the criteria as the following: What is a tracking system…

Reporting on post-menopausal hormone therapy: an analysis of gynaecologists' web pages.

PubMed

Bucksch, Jens; Kolip, Petra; Deitermann, Bernhilde

2004-01-01

The present study was designed to analyse Web pages of German gynaecologists with regard to postmenopausal hormone therapy (HT). There is a growing body of evidence, that the overall health risks of HT exceed the benefits. Making one's own informed choice has become a central concern for menopausal women. The Internet is an important source of health information, but the quality is often dubious. The study focused on the analysis of basic criteria such as last modification date and quality of the HT information content. The results of the Women's Health Initiative Study (WHI) were used as a benchmark. We searched for relevant Web pages by entering a combination of key words (9 x 13 = 117) into the search engine www.google.de. Each Web page was analysed using a standardized questionnaire. The basic criteria and the quality of content on each Web page were separately categorized by two evaluators. Disagreements were resolved by discussion. Of the 97 websites identified, basic criteria were not met by the majority. For example, the modification date was displayed by only 23 (23.7%) Web pages. The quality of content of most Web pages regarding HT was inaccurate and incomplete. Whilst only nine (9.3%) took up a balanced position, 66 (68%) recommended HT without any restrictions. In 22 cases the recommendation was indistinct and none of the sites refused HT. With regard to basic criteria, there was no difference between HT-recommending Web pages and sites with balanced position. Evidence-based information resulting from the WHI trial was insufficiently represented on gynaecologists' Web pages. Because of the growing number of consumers looking online for health information, the danger of obtaining harmful information has to be minimized. Web pages of gynaecologists do not appear to be recommendable for women because they do not provide recent evidence-based findings about HT.

Control and dynamics study for the satellite power system. Volume 1: MPTS/SPS collector dynamic analysis and surface deformation

NASA Technical Reports Server (NTRS)

Wang, S. J.

1980-01-01

The basic dynamic properties and performance characteristics of the microwave power transmission satellite antenna were analyzed in an effort to develop criteria, requirements, and constraints for the control and structure design. The vibrational properties, the surface deformation, and the corresponding scan loss under the influence of disturbances are considered.

Implementing a Multiple Criteria Model Base in Co-Op with a Graphical User Interface Generator

DTIC Science & Technology

1993-09-23

PROMETHEE ................................ 44 A. THE ALGORITHM S ................................... 44 1. Basic Algorithm of PROMETHEE I and... PROMETHEE II ..... 45 a. Use of the Algorithm in PROMETHEE I ............. 49 b. Use of the Algorithm in PROMETHEE II ............. 50 V 2. Algorithm of... PROMETHEE V ......................... 50 B. SCREEN DESIGNS OF PROMETHEE ...................... 51 1. PROMETHEE I and PROMETHEE II ................... 52 a

Functional design criteria for interim stabilization safety class 1 trip circuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, R.E., Westinghouse Hanford

1996-06-10

This Functional Design Criteria document outlines the basic requirements for the Safety Class 1 Trip Circuit. The objective of the Safety Class 1 Trip Circuit is to isolate the power circuitry to the Class 1 Division 2, Group B or lesser grade electrically fed loads located in the pump pit. The electrically fed load circuits need to have power isolated to them upon receipt of the following conditions, loss of flammable gases being released (above a predetermined threshold), and seismic(greater than 0.12g acceleration) activity. The two circuits requiring power isolation are the pump and heat trace power circuits. The Safetymore » Class 1 Trip Circuit will be used to support salt well pumping in SST`s containing potentially flammable gas-bearing / gas-producing radioactive waste.« less

Configuration evaluation and criteria plan. Volume 2: Evaluation critera plan (preliminary). Space Transportation Main Engine (STME) configuration study

NASA Technical Reports Server (NTRS)

Bair, E. K.

1986-01-01

The unbiased selection of the Space Transportation Main Engine (STME) configuration requires that the candidate engines be evaluated against a predetermined set of criteria which must be properly weighted to emphasize critical requirements defined prior to the actual evaluation. The evaluation and selection process involves the following functions: (1) determining if a configuration can satisfy basic STME requirements (yes/no); (2) defining the evaluation criteria; (3) selecting the criteria relative importance or weighting; (4) determining the weighting sensitivities; and (5) establishing a baseline for engine evaluation. The criteria weighting and sensitivities are cost related and are based on mission models and vehicle requirements. The evaluation process is used as a coarse screen to determine the candidate engines for the parametric studies and as a fine screen to determine concept(s) for conceptual design. The criteria used for the coarse and fine screen evaluation process is shown. The coarse screen process involves verifying that the candidate engines can meet the yes/no screening requirements and a semi-subjective quantitative evaluation. The fine screen engines have to meet all of the yes/no screening gates and are then subjected to a detailed evaluation or assessment using the quantitative cost evaluation processes. The option exists for re-cycling a concept through the quantitative portion of the screening and allows for some degree of optimization. The basic vehicle is a two stage LOX/HC, LOX/LH2 parallel burn vehicle capable of placing 150,000 lbs in low Earth orbit (LEO).

A Basic Experiment on the Aerodynamics of Sniffing

NASA Astrophysics Data System (ADS)

Settles, Gary S.; Kester, Douglas A.

1999-11-01

Our previous work (APS/DFD97:Ii1 and 98:FA10) used flow visualization to observe canine olfaction. The results raised some basic questions about the aerodynamics of sniffing, e.g. what flow rate is required, as a function of distance from a scent source, to acquire a detectable scent? Commercial sampler technology does not address such questions. A basic experiment was thus designed to investigate the aerodynamic phenomena and performance of sniffing. A stable thermal layer on a horizontal plane was used as a "scent" source per Reynolds Analogy. The detector was a thermocouple inside a sniffer tube. Flow patterns were observed by schlieren. Results show the importance of sniffer proximity to localize a scent source. A transient scent spike occurs at the sniff onset, followed by signal decline due to source depletion. Sniffing shows extreme sensitivity to disruptive air currents. Unstably-stratified scent sources (thermal plumes) are also considered. These results help us understand evolved sniffing behavior, and they suggest sampler design criteria for electronic-nose devices. (Research supported by DARPA.)

Basic list of veterinary medical serials, third edition: using a decision matrix to update the core list of veterinary journals.

PubMed

Ugaz, Ana G; Boyd, C Trenton; Croft, Vicki F; Carrigan, Esther E; Anderson, Katherine M

2010-10-01

This paper presents the methods and results of a study designed to produce the third edition of the "Basic List of Veterinary Medical Serials," which was established by the Veterinary Medical Libraries Section in 1976 and last updated in 1986. A set of 238 titles were evaluated using a decision matrix in order to systematically assign points for both objective and subjective criteria and determine an overall score for each journal. Criteria included: coverage in four major indexes, scholarly impact rank as tracked in two sources, identification as a recommended journal in preparing for specialty board examinations, and a veterinary librarian survey rating. Of the 238 titles considered, a minimum scoring threshold determined the 123 (52%) journals that constituted the final list. The 36 subject categories represented on the list include general and specialty disciplines in veterinary medicine. A ranked list of journals and a list by subject category were produced. Serials appearing on the third edition of the "Basic List of Veterinary Medical Serials" met expanded objective measures of quality and impact as well as subjective perceptions of value by both librarians and veterinary practitioners.

Basic list of veterinary medical serials, third edition: using a decision matrix to update the core list of veterinary journals

PubMed Central

Ugaz, Ana G; Boyd, C. Trenton; Croft, Vicki F; Carrigan, Esther E; Anderson, Katherine M

2010-01-01

Objective: This paper presents the methods and results of a study designed to produce the third edition of the “Basic List of Veterinary Medical Serials,” which was established by the Veterinary Medical Libraries Section in 1976 and last updated in 1986. Methods: A set of 238 titles were evaluated using a decision matrix in order to systematically assign points for both objective and subjective criteria and determine an overall score for each journal. Criteria included: coverage in four major indexes, scholarly impact rank as tracked in two sources, identification as a recommended journal in preparing for specialty board examinations, and a veterinary librarian survey rating. Results: Of the 238 titles considered, a minimum scoring threshold determined the 123 (52%) journals that constituted the final list. The 36 subject categories represented on the list include general and specialty disciplines in veterinary medicine. A ranked list of journals and a list by subject category were produced. Conclusion: Serials appearing on the third edition of the “Basic List of Veterinary Medical Serials” met expanded objective measures of quality and impact as well as subjective perceptions of value by both librarians and veterinary practitioners. PMID:20936066

Application of active controls technology to aircraft bide smoothing systems

NASA Technical Reports Server (NTRS)

Lapins, M.; Jacobson, I. D.

1975-01-01

A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade offs involving sensor types, choice of feedback loops, human comfort, and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL aircraft and an executive transport are considered. Theoretically predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.

Application of Active Controls Technology to Aircraft Ride Smoothing Systems

NASA Technical Reports Server (NTRS)

Lapins, Maris; Jacobson, Ira D.

1975-01-01

A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade-offs involving sensor types, choice of feedback loops, human comfort and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL-class aircraft and an executive transport are considered. Theoretically-predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.

Study of airborne science experiment management concepts for application to space shuttle, volume 2

NASA Technical Reports Server (NTRS)

Mulholland, D. R.; Reller, J. O., Jr.; Neel, C. B.; Haughney, L. C.

1973-01-01

Airborne research management and shuttle sortie planning at the Ames Research Center are reported. Topics discussed include: basic criteria and procedures for the formulation and approval of airborne missions; ASO management structure and procedures; experiment design, development, and testing aircraft characteristics and experiment interfaces; information handling for airborne science missions; mission documentation requirements; and airborne science methods and shuttle sortie planning.

Multi Criteria Decision Support Model for the Turkish Air Force Personnel Course/Education Planning System

DTIC Science & Technology

2011-03-01

Utility Theory . . . . . . . . . . . . . . . . . 21 2.2.4 ELECTRE Method . . . . . . . . . . . . . . . . . . . . . . . . 22 2.2.5 PROMETHEE Method...more complicated than the other ones because of its structure. 2.2.5 PROMETHEE Method. PROMETHEE (Preference Ranking Organization Method for...Enrichment Evaluations) method was proposed by Brans and Vincke (1985). Basically this method has two different types. PROMETHEE I has been designed for

Trauma system evaluation in developing countries: applicability of American College of Surgeons/Committee on Trauma (ACS/COT) basic criteria.

PubMed

Latifi, Rifat; Ziemba, Michelle; Leppäniemi, Ari; Dasho, Erion; Dogjani, Agron; Shatri, Zhaneta; Kociraj, Agim; Oldashi, Fatos; Shosha, Lida

2014-08-01

Trauma continues to be a major health problem worldwide, particularly in the developing world, with high mortality and morbidity. Yet most developing countries lack an organized trauma system. Furthermore, developing countries do not have in place any accreditation process for trauma centers; thus, no accepted standard assessment tools exist to evaluate their trauma services. The aims of this study were to evaluate the trauma system in Albania, using the basic trauma criteria of the American College of Surgeons/Committee on Trauma (ACS/COT) as assessment tools, and to provide the Government with a situational analysis relative to these criteria. We used the ACS/COT basic criteria as assessment tools to evaluate the trauma system in Albania. We conducted a series of semi-structured interviews, unstructured interviews, and focus groups with all stakeholders at the Ministry of Health, at the University Trauma Hospital (UTH) based in Tirana (the capital city), and at ten regional hospitals across the country. Albania has a dedicated national trauma center that serves as the only tertiary center, plus ten regional hospitals that provide some trauma care. However, overall, its trauma system is in need of major reforms involving all essential elements in order to meet the basic requirements of a structured trauma system. The ACS/COT basic criteria can be used as assessment tools to evaluate trauma care in developing countries. Further studies are needed in other developing countries to validate the applicability of these criteria.

Basic symptoms and the prediction of first-episode psychosis.

PubMed

Schultze-Lutter, Frauke; Ruhrmann, Stephan; Fusar-Poli, Paolo; Bechdolf, Andreas; Schimmelmann, Benno G; Klosterkötter, Joachim

2012-01-01

Recent focus on early detection and intervention in psychosis has renewed interest in subtle psychopathology beyond positive and negative symptoms. Such self-experienced sub-clinical disturbances are described in detail by the basic symptom concept. This review will give an introduction into the concept of basic symptoms and describe the development of the current instruments for their assessment, the Schizophrenia Proneness Instrument, Adult (SPI-A) and Child and Youth version (SPI-CY), as well as of the two at-risk criteria: the at-risk criterion Cognitive-Perceptive Basic Symptoms (COPER) and the high-risk criterion Cognitive Disturbances (COGDIS). Further, an overview of prospective studies using both or either basic symptom criteria and transition rates related to these will be given, and the potential benefit of combining ultra-high risk criteria, particularly attenuated psychotic symptoms, and basic symptom criteria will be discussed. Finally, their prevalence in psychosis patients, i.e. the sensitivity, as well as in general population samples will be described. It is concluded that both COPER and COGDIS are able to identify subjects at a high risk of developing psychosis. Further, they appear to be sufficiently frequent prior to onset of the first psychotic episode as well as sufficiently rare in persons of general population to be considered as valuable for an early detection of psychosis.

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Cable television basic signal leakage performance criteria. 76.611 Section 76.611 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Review of jet engine emissions

NASA Technical Reports Server (NTRS)

Grobman, J. S.

1972-01-01

A review of the emission characteristics of jet engines is presented. The sources and concentrations of the various constituents in the engine exhaust and the influence of engine operating conditions on emissions are discussed. Cruise emissions to be expected from supersonic engines are compared with emissions from subsonic engines. The basic operating principles of the gas turbine combustor are reviewed together with the effects of combustor operating conditions on emissions. The performance criteria that determine the design of gas turbine combustors are discussed. Combustor design techniques are considered that may be used to reduce emissions.

Optimal design criteria - prediction vs. parameter estimation

NASA Astrophysics Data System (ADS)

Waldl, Helmut

2014-05-01

G-optimality is a popular design criterion for optimal prediction, it tries to minimize the kriging variance over the whole design region. A G-optimal design minimizes the maximum variance of all predicted values. If we use kriging methods for prediction it is self-evident to use the kriging variance as a measure of uncertainty for the estimates. Though the computation of the kriging variance and even more the computation of the empirical kriging variance is computationally very costly and finding the maximum kriging variance in high-dimensional regions can be time demanding such that we cannot really find the G-optimal design with nowadays available computer equipment in practice. We cannot always avoid this problem by using space-filling designs because small designs that minimize the empirical kriging variance are often non-space-filling. D-optimality is the design criterion related to parameter estimation. A D-optimal design maximizes the determinant of the information matrix of the estimates. D-optimality in terms of trend parameter estimation and D-optimality in terms of covariance parameter estimation yield basically different designs. The Pareto frontier of these two competing determinant criteria corresponds with designs that perform well under both criteria. Under certain conditions searching the G-optimal design on the above Pareto frontier yields almost as good results as searching the G-optimal design in the whole design region. In doing so the maximum of the empirical kriging variance has to be computed only a few times though. The method is demonstrated by means of a computer simulation experiment based on data provided by the Belgian institute Management Unit of the North Sea Mathematical Models (MUMM) that describe the evolution of inorganic and organic carbon and nutrients, phytoplankton, bacteria and zooplankton in the Southern Bight of the North Sea.

Tunnel transit-time (TUNNETT) devices for terahertz sources

NASA Technical Reports Server (NTRS)

Haddad, G. I.; East, J. R.; Kidner, C.

1991-01-01

The potential and capabilities of tunnel transit-time (TUNNETT) devices for power generation in the 100-1000 GHz range are presented. The basic properties of these devices and the important material parameters which determine their properties are discussed and criteria for designing such devices are presented. It is shown from a first-order model that significant amounts of power can be obtained from these devices in the terahertz frequency range.

Basic criteria for formation of growth twins in high stacking fault energy metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, K. Y.; Zhang, X.; Department of Mechanical Engineering, Texas A and M University, College Station, Texas 77843

Nanotwinned metals received significant interest lately as twin boundaries may enable simultaneous enhancement of strength, ductility, thermal stability, and radiation tolerance. However, nanotwins have been the privilege of metals with low-to-intermediate stacking fault energy (SFE). Recent scattered studies show that nanotwins could be introduced into high SFE metals, such as Al. In this paper, we examine several sputter-deposited, (111) textured Ag/Al, Cu/Ni, and Cu/Fe multilayers, wherein growth twins were observed in Al, Ni, and face-centered cubic (fcc) Fe. The comparisons lead to two important design criteria that dictate the introduction of growth twins in high SFE metals. The validity ofmore » these criteria was then examined in Ag/Ni multilayers. Furthermore, another twin formation mechanism in high SFE metals was discovered in Ag/Ni system.« less

7 CFR 1940.552 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... basic State Factor (SF). The data sources used for each criteria is believed to be the most current and... given the criteria. The transition formula first checks whether the current year's basic formula... year's BFA). EC14NO91.000 If the current year's State BFA is not within this transition range, the...

Design enhancement tools in MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Wallerstein, D. V.

1984-01-01

Design sensitivity is the calculation of derivatives of constraint functions with respect to design variables. While a knowledge of these derivatives is useful in its own right, the derivatives are required in many efficient optimization methods. Constraint derivatives are also required in some reanalysis methods. It is shown where the sensitivity coefficients fit into the scheme of a basic organization of an optimization procedure. The analyzer is to be taken as MSC/NASTRAN. The terminator program monitors the termination criteria and ends the optimization procedure when the criteria are satisfied. This program can reside in several plances: in the optimizer itself, in a user written code, or as part of the MSC/EOS (Engineering Operating System) MSC/EOS currently under development. Since several excellent optimization codes exist and since they require such very specialized technical knowledge, the optimizer under the new MSC/EOS is considered to be selected and supplied by the user to meet his specific needs and preferences. The one exception to this is a fully stressed design (FSD) based on simple scaling. The gradients are currently supplied by various design sensitivity options now existing in MSC/NASTRAN's design sensitivity analysis (DSA).

How to design and write a clinical research protocol in Cosmetic Dermatology*

PubMed Central

Bagatin, Ediléia; Miot, Helio A.

2013-01-01

Cosmetic Dermatology is a growing subspecialty. High-quality basic science studies have been published; however, few double-blind, randomized controlled clinical trials, which are the major instrument for evidence-based medicine, have been conducted in this area. Clinical research is essential for the discovery of new knowledge, improvement of scientific basis, resolution of challenges, and good clinical practice. Some basic principles for a successful researcher include interest, availability, persistence, and honesty. It is essential to learn how to write a protocol research and to know the international and national regulatory rules. A complete clinical trial protocol should include question, background, objectives, methodology (design, variable description, sample size, randomization, inclusion and exclusion criteria, intervention, efficacy and safety measures, and statistical analysis), consent form, clinical research form, and references. Institutional ethical review board approval and financial support disclosure are necessary. Publication of positive or negative results should be an authors' commitment. PMID:23539006

[Basic requirements on post-marketing clinical re-evaluation of chinese medicine and phase IV clinical trials].

PubMed

Xie, Yanming; Wang, Yanping; Tian, Feng; Wang, Yongyan

2011-10-01

As information on safety and effectiveness is not comprehensive, gained from the researches for listing approval of Chinese medicine, it is very necessary to conduct post-marketing clinical re-evaluation of Chinese medicine. Effectiveness, safety and economic evaluation are three main aspects of post-marketing clinical re-evaluation. In this paper, the difference and relations between the post-marketing clinical re-evaluation and the phase IV clinical trials were discussed, and the basic requests and suggestions were proposed, according to the domestic and foreign relevant regulations and experts' suggestions, and discussed the requirements of the phase IV clinical trials on indications, design methods, inclusion and exclusion criteria, sample size, etc.

Health benefits and health claims of probiotics: bridging science and marketing.

PubMed

Rijkers, Ger T; de Vos, Willem M; Brummer, Robert-Jan; Morelli, Lorenzo; Corthier, Gerard; Marteau, Philippe

2011-11-01

Health claims for probiotics are evaluated by the Panel on Dietetic Products, Nutrition and Allergies of the European Food Safety Authority. Despite a substantial amount of basic and clinical research on the beneficial effects of probiotics, all of the evaluated claim applications thus far have received a negative opinion. With the restrictions on the use of clinical endpoints, validated biomarkers for gut health and immune health in relation to reduction in disease risk are needed. Clear-cut criteria for design as well as evaluation of future studies are needed. An open dialogue between basic and clinical scientists, regulatory authorities, food and nutrition industry, and consumers could bridge the gap between science and marketing of probiotics.

The use of quizStar application for online examination in basic physics course

NASA Astrophysics Data System (ADS)

Kustijono, R.; Budiningarti, H.

2018-03-01

The purpose of the study is to produce an online Basic Physics exam system using the QuizStar application. This is a research and development with ADDIE model. The steps are: 1) analysis; 2) design; 3) development; 4) implementation; 5) evaluation. System feasibility is reviewed for its validity, practicality, and effectiveness. The subjects of research are 60 Physics Department students of Universitas Negeri Surabaya. The data analysis used is a descriptive statistic. The validity, practicality, and effectiveness scores are measured using a Likert scale. Criteria feasible if the total score of all aspects obtained is ≥ 61%. The results obtained from the online test system by using QuizStar developed are 1) conceptually feasible to use; 2) the system can be implemented in the Basic Physics assessment process, and the existing constraints can be overcome; 3) student's response to system usage is in a good category. The results conclude that QuizStar application is eligible to be used for online Basic Physics exam system.

Acoustic Characteristics of Various Treatment Panel Designs for HSCT Ejector Liner Acoustic Technology Development Program

NASA Technical Reports Server (NTRS)

Salikuddin, M.; Kraft, R. E.; Syed, A. a.; Vu, D. D.; Mungur, P.; Langenbrunner, L. E.; Majjigi, R. K.

2006-01-01

The objectives of the initial effort (Phase I) of HSR Liner Technology Program, the selection of promising liner concepts, design and fabrication of these concepts for laboratory tests, testing these liners in the laboratory by using impedance tube and flow ducts, and developing empirical impedance/suppression correlation, are successfully completed. Acoustic and aerodynamic criteria for the liner design are established. Based on these criteria several liners are designed. The liner concepts designed and fabricated include Single-Degree-of-Freedom (SDOF), Two-Degree-of-Freedom (2DOF), and Bulk Absorber. Two types of SDOF treatment are fabricated, one with a perforated type face plate and the other with a wiremesh (woven) type faceplate. In addition, special configurations of these concepts are also included in the design. Several treatment panels are designed for parametric study. In these panels the facesheets of different porosity, hole diameter, and sheet thickness are utilized. Several deep panels (i.e., 1 in. deep) are designed and instrumented to measure DC flow resistance and insitu impedance in the presence of grazing flow. Basic components of these panels (i.e., facesheets, bulk materials, etc.) are also procured and tested. The results include DC flow resistance, normal impedance, and insertion loss.

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

Development of a magnetically suspended momentum wheel

NASA Technical Reports Server (NTRS)

Hamilton, S. B.

1973-01-01

An engineering model of a magnetically suspended momentum wheel was designed, fabricated, and tested under laboratory conditions. The basic unit consisted of two magnet bearings, a sculptured aluminum rotor, brushless dc spin motor, and electronics. The magnet bearings, utilizing rare-earth cobltrat-samarium magnets were active radially and passive axially. The results of the program showed that momentum wheels with magnetic bearings are feasible and operable, and that magnetic bearings of this type are capable of being used for applications where high capacity, high stiffness, and low power consumption are required. The tests performed developed criteria for improved performance for future designs.

Laboratory and Industrial Ventilation

NASA Technical Reports Server (NTRS)

1972-01-01

This handbook supplements the Facilities Engineering Handbook (NHB 7320.1) and provides additional policies and criteria for uniform application to ventilation systems. It expands basic requirements, provides additional design and construction guidance, and places emphasis on those design considerations which will provide for greater effectiveness in the use of these systems. The provisions of this handbook are applicable to all NASA field installations and the Jet Propulsion Laboratory. Since supply of this handbook is limited, abstracts of the portion or portions applicable to a given requirement will be made for the individual specific needs encountered rather than supplying copies of the handbook as has been past practice.

Application of frequency domain handling qualities criteria to the longitudinal landing task

NASA Technical Reports Server (NTRS)

Sarrafian, S. K.; Powers, B. G.

1985-01-01

Under NASA sponsorship, an in-flight simulation of the longitudinal handling qualities of several configurations for the approach and landing tasks was performed on the USAF/AFWAL Total In-Flight Simulator by the Calspan Corporation. The basic configuration was a generic transport airplane with static instability. The control laws included proportional plus integral gain loops to produce pitch-rate and angle-of-attack feedback loops. The evaluation task was a conventional visual approach to a flared touchdown at a designated spot on the runway with a lateral offset. The general conclusions were that the existing criteria are based on pitch-attitude response and that these characteristics do not adequately discriminate between the good and bad configurations of this study. This paper describes the work that has been done to further develop frequency-based criteria in an effort to provide better correlation with the observed data.

The number of mechanically ventilated ICU patients meeting communication criteria.

PubMed

Happ, Mary Beth; Seaman, Jennifer B; Nilsen, Marci L; Sciulli, Andrea; Tate, Judith A; Saul, Melissa; Barnato, Amber E

2015-01-01

(1) Estimate the proportion of mechanically ventilated (MV) intensive care unit (ICU) patients meeting basic communication criteria who could potentially be served by assistive communication tools and speech-language consultation. (2) Compare characteristics of patients who met communication criteria with those who did not. Observational cohort study in which computerized billing and medical records were screened over a 2-year period. Six specialty ICUs across two hospitals in an academic health system. Eligible patients were awake, alert, and responsive to verbal communication from clinicians for at least one 12-h nursing shift while receiving MV ≥ 2 consecutive days. Of the 2671 MV patients screened, 1440 (53.9%) met basic communication criteria. The Neurological ICU had the lowest proportion of MV patients meeting communication criteria (40.82%); Trauma ICU had the highest proportion (69.97%). MV patients who did not meet basic communication criteria (n = 1231) were younger, had shorter lengths of stay and lower costs, and were more likely to die during the hospitalization. We estimate that half of MV patients in the ICU could potentially be served by assistive communication tools and speech-language consultation. Copyright © 2015 Elsevier Inc. All rights reserved.

Recommendations on basic requirements for intensive care units: structural and organizational aspects.

PubMed

Valentin, Andreas; Ferdinande, Patrick

2011-10-01

To provide guidance and recommendations for the planning or renovation of intensive care units (ICUs) with respect to the specific characteristics relevant to organizational and structural aspects of intensive care medicine. The Working Group on Quality Improvement (WGQI) of the European Society of Intensive Care Medicine (ESICM) identified the basic requirements for ICUs by a comprehensive literature search and an iterative process with several rounds of consensus finding with the participation of 47 intensive care physicians from 23 countries. The starting point of this process was an ESICM recommendation published in 1997 with the need for an updated version. The document consists of operational guidelines and design recommendations for ICUs. In the first part it covers the definition and objectives of an ICU, functional criteria, activity criteria, and the management of equipment. The second part deals with recommendations with respect to the planning process, floorplan and connections, accommodation, fire safety, central services, and the necessary communication systems. This document provides a detailed framework for the planning or renovation of ICUs based on a multinational consensus within the ESICM.

Analog design optimization methodology for ultralow-power circuits using intuitive inversion-level and saturation-level parameters

NASA Astrophysics Data System (ADS)

Eimori, Takahisa; Anami, Kenji; Yoshimatsu, Norifumi; Hasebe, Tetsuya; Murakami, Kazuaki

2014-01-01

A comprehensive design optimization methodology using intuitive nondimensional parameters of inversion-level and saturation-level is proposed, especially for ultralow-power, low-voltage, and high-performance analog circuits with mixed strong, moderate, and weak inversion metal-oxide-semiconductor transistor (MOST) operations. This methodology is based on the synthesized charge-based MOST model composed of Enz-Krummenacher-Vittoz (EKV) basic concepts and advanced-compact-model (ACM) physics-based equations. The key concept of this methodology is that all circuit and system characteristics are described as some multivariate functions of inversion-level parameters, where the inversion level is used as an independent variable representative of each MOST. The analog circuit design starts from the first step of inversion-level design using universal characteristics expressed by circuit currents and inversion-level parameters without process-dependent parameters, followed by the second step of foundry-process-dependent design and the last step of verification using saturation-level criteria. This methodology also paves the way to an intuitive and comprehensive design approach for many kinds of analog circuit specifications by optimization using inversion-level log-scale diagrams and saturation-level criteria. In this paper, we introduce an example of our design methodology for a two-stage Miller amplifier.

Crew interface with a telerobotic control station

NASA Technical Reports Server (NTRS)

Mok, Eva

1987-01-01

A method for apportioning crew-telerobot tasks has been derived to facilitate the design of a crew-friendly telerobot control station. To identify the most appropriate state-of-the-art hardware for the control station, task apportionment must first be conducted to identify if an astronaut or a telerobot is best to execute the task and which displays and controls are required for monitoring and performance. Basic steps that comprise the task analysis process are: (1) identify space station tasks; (2) define tasks; (3) define task performance criteria and perform task apportionment; (4) verify task apportionment; (5) generate control station requirements; (6) develop design concepts to meet requirements; and (7) test and verify design concepts.

Tools for evaluating Veterinary Services: an external auditing model for the quality assurance process.

PubMed

Melo, E Correa

2003-08-01

The author describes the reasons why evaluation processes should be applied to the Veterinary Services of Member Countries, either for trade in animals and animal products and by-products between two countries, or for establishing essential measures to improve the Veterinary Service concerned. The author also describes the basic elements involved in conducting an evaluation process, including the instruments for doing so. These basic elements centre on the following:--designing a model, or desirable image, against which a comparison can be made--establishing a list of processes to be analysed and defining the qualitative and quantitative mechanisms for this analysis--establishing a multidisciplinary evaluation team and developing a process for standardising the evaluation criteria.

29 CFR 1904.11 - Recording criteria for work-related tuberculosis cases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Recording criteria for work-related tuberculosis cases... Forms and Recording Criteria § 1904.11 Recording criteria for work-related tuberculosis cases. (a) Basic... tuberculosis (TB), and that employee subsequently develops a tuberculosis infection, as evidenced by a positive...

29 CFR 1904.11 - Recording criteria for work-related tuberculosis cases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Recording criteria for work-related tuberculosis cases... Forms and Recording Criteria § 1904.11 Recording criteria for work-related tuberculosis cases. (a) Basic... tuberculosis (TB), and that employee subsequently develops a tuberculosis infection, as evidenced by a positive...

29 CFR 1904.11 - Recording criteria for work-related tuberculosis cases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Recording criteria for work-related tuberculosis cases... Forms and Recording Criteria § 1904.11 Recording criteria for work-related tuberculosis cases. (a) Basic... tuberculosis (TB), and that employee subsequently develops a tuberculosis infection, as evidenced by a positive...

29 CFR 1904.11 - Recording criteria for work-related tuberculosis cases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Recording criteria for work-related tuberculosis cases... Forms and Recording Criteria § 1904.11 Recording criteria for work-related tuberculosis cases. (a) Basic... tuberculosis (TB), and that employee subsequently develops a tuberculosis infection, as evidenced by a positive...

29 CFR 1904.11 - Recording criteria for work-related tuberculosis cases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Recording criteria for work-related tuberculosis cases... Forms and Recording Criteria § 1904.11 Recording criteria for work-related tuberculosis cases. (a) Basic... tuberculosis (TB), and that employee subsequently develops a tuberculosis infection, as evidenced by a positive...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

A Look at Handling Qualities of Canard Configurations

NASA Technical Reports Server (NTRS)

Anderson, Seth B.

1986-01-01

The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. Reviewed are the development of several canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

Teleoperator system man-machine interface requirements for satellite retrieval and satellite servicing. Volume 1: Requirements

NASA Technical Reports Server (NTRS)

Malone, T. B.

1972-01-01

Requirements were determined analytically for the man machine interface for a teleoperator system performing on-orbit satellite retrieval and servicing. Requirements are basically of two types; mission/system requirements, and design requirements or design criteria. Two types of teleoperator systems were considered: a free flying vehicle, and a shuttle attached manipulator. No attempt was made to evaluate the relative effectiveness or efficiency of the two system concepts. The methodology used entailed an application of the Essex Man-Systems analysis technique as well as a complete familiarization with relevant work being performed at government agencies and by private industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Yang; Liu, Zhiqiang, E-mail: lzq@semi.ac.cn, E-mail: spring@semi.ac.cn; Yi, Xiaoyan, E-mail: lzq@semi.ac.cn, E-mail: spring@semi.ac.cn

To evaluate electron leakage in InGaN/GaN multiple quantum well (MQW) light emitting diodes (LEDs), analytic models of ballistic and quasi-ballistic transport are developed. With this model, the impact of critical variables effecting electron leakage, including the electron blocking layer (EBL), structure of multiple quantum wells (MQWs), polarization field, and temperature are explored. The simulated results based on this model shed light on previously reported experimental observations and provide basic criteria for suppressing electron leakage, advancing the design of InGaN/GaN LEDs.

Mission requirements for a manned earth observatory. Task 2: Reference mission definition and analyiss, volume 2

NASA Technical Reports Server (NTRS)

1973-01-01

The mission requirements and conceptual design of manned earth observatory payloads for the 1980 time period are discussed. Projections of 1980 sensor technology and user data requirements were used to formulate typical basic criteria pertaining to experiments, sensor complements, and reference missions. The subjects discussed are: (1) mission selection and prioritization, (2) baseline mission analysis, (3) earth observation data handling and contingency plans, and (4) analysis of low cost mission definition and rationale.

Practical quality control tools for curves and surfaces

NASA Technical Reports Server (NTRS)

Small, Scott G.

1992-01-01

Curves (geometry) and surfaces created by Computer Aided Geometric Design systems in the engineering environment must satisfy two basic quality criteria: the geometric shape must have the desired engineering properties; and the objects must be parameterized in a way which does not cause computational difficulty for geometric processing and engineering analysis. Interactive techniques are described which are in use at Boeing to evaluate the quality of aircraft geometry prior to Computational Fluid Dynamic analysis, including newly developed methods for examining surface parameterization and its effects.

Development and fabrication of a graphite polyimide box beam

NASA Technical Reports Server (NTRS)

Nadler, M. A.; Darms, F. J.

1972-01-01

The state-of-the-art of graphite/polyimide structures was evaluated and key design and fabrication issues to be considered in future hardware programs are defined. The fabrication and testing at 500 F of a graphite/polyimide center wing box beam using OV-10A aircraft criteria was accomplished. The baseline design of this box was developed in a series of studies of other advanced composite materials: glass/epoxy, boron/epoxy, and boron/polyimide. The use of this basic design permits ready comparison of the performance of graphite/polyimide with these materials. Modifications to the baseline composite design were made only in those areas effected by the change of materials. Processing studies of graphite fiber polyimide resins systems resulted in the selection of a Modmor II/Gemon L material.

Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.

Design and development of a structural mode control system

NASA Technical Reports Server (NTRS)

1977-01-01

A program was conducted to compile and document some of the existing information about the conceptual design, development, and tests of the B-1 structural mode control system (SMCS) and its impact on ride quality. This report covers the following topics: (1) Rationale of selection of SMCS to meet ride quality criteria versus basic aircraft stiffening. (2) Key considerations in designing an SMCS, including vane geometry, rate and deflection requirements, power required, compensation network design, and fail-safe requirements. (3) Summary of key results of SMCS vane wind tunnel tests. (4) SMCS performance. (5) SMCS design details, including materials, bearings, and actuators. (6) Results of qualification testing of SMCS on the "Iron Bird" flight control simulator, and lab qualification testing of the actuators. (7) Impact of SMCS vanes on engine inlet characteristics from wind tunnel tests.

Laboratory Design for Microbiological Safety

PubMed Central

Phillips, G. Briggs; Runkle, Robert S.

1967-01-01

Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

Functions and requirements for tank farm restoration and safe operations, Project W-314. Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrison, R.C.

1995-02-01

This Functions and Requirements document (FRD) establishes the basic performance criteria for Project W-314, in accordance with the guidance outlined in the letter from R.W. Brown, RL, to President, WHC, ``Tank Waste Remediation System (TWRS) Project Documentation Methodology,`` 94-PRJ-018, dated 3/18/94. The FRD replaces the Functional Design Criteria (FDC) as the project technical baseline documentation. Project W-314 will improve the reliability of safety related systems, minimize onsite health and safety hazards, and support waste retrieval and disposal activities by restoring and/or upgrading existing Tank Farm facilities and systems. The scope of Project W-314 encompasses the necessary restoration upgrades of themore » Tank Farms` instrumentation, ventilation, electrical distribution, and waste transfer systems.« less

[Substantiation of a complex of radiation-hygienic approaches to the management of very low-level waste].

PubMed

Korenkov, I P; Lashchenova, T N; Shandala, N K

2015-01-01

In the article there are presented materials on radiation-hygienic approaches to the treatment of very low level radioactive waste (VLLW) and industrial waste containing radionuclides. There is done detailed information on radiation-hygienic principles and criteria for the assurance ofradiation safety in the collection, transportation, storage and processing of VLLW as a category of radioactive waste.. Particular attention is paid to the problem of designing VLLW landfill site choice, system of radiation monitoring in operation and decommissioning of the landfill. There are presented data about the criteria for the release of VLLW buried at the site, from regulatory control. Also there are considered in detail the radiation-hygienic requirements for radiation safety of industrial waste containing radionuclides for which there is assumed unlimited and limited use of solid materials in economic activity, based on the requirements ofthe revised Basic Sanitary Rules for Radiation Safety - 99/2010. There are considered basic requirements for the organization of industrial waste landfill. As an example, there-are presented the hygiene requirements for industrial waste management and results of waste categorization in Northern Federal Enterprise for Radioactive Waste Management.

Developing a quality assurance program for online services.

PubMed Central

Humphries, A W; Naisawald, G V

1991-01-01

A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas. PMID:1909197

Developing a quality assurance program for online services.

PubMed

Humphries, A W; Naisawald, G V

1991-07-01

A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas.

Performance criteria guideline for three explosion protection methods of electrical equipment rated up to 15,000 volts AC

NASA Technical Reports Server (NTRS)

Linley, L. J.; Luper, A. B.; Dunn, J. H.

1982-01-01

The Bureau of Mines, U.S. Department of the Interior, is reviewing explosion protection methods for use in gassy coal mines. This performance criteria guideline is an evaluation of three explosion protection methods of machines electrically powered with voltages up to 15,000 volts ac. A sufficient amount of basic research has been accomplished to verify that the explosion proof and pressurized enclosure methods can provide adequate explosion protection with the present state of the art up to 15,000 volts ac. This routine application of the potted enclosure as a stand alone protection method requires further investigation or development in order to clarify performance criteria and verification certification requirements. An extensive literature search, a series of high voltage tests, and a design evaluation of the three explosion protection methods indicate that the explosion proof, pressurized, and potted enclosures can all be used to enclose up to 15,000 volts ac.

Clinical Trial Basics

MedlinePlus

... participate, in a study. These guidelines are called Inclusion/Exclusion Criteria . Factors that allow you to take part in a clinical trial are called "inclusion criteria." Those that exclude or prevent participation are " ...

Dynamic issues in launch vehicle design

NASA Technical Reports Server (NTRS)

Ryan, Robert S.; Jewell, Ronald E.

1993-01-01

Launch vehicles, in general, have been defined using performance requirements and generic payload characteristics which dictated the propulsion system and the payload carrier. The vehicle concept is then selected using these requirements in conjunction with basic criteria and standards. During the design phase, the selected concept must be modified in order to cope with the numerous dynamic and other problems that occur during design and development. This is costly and is, to some extent, unnecessary. The purpose of this paper is to propose an approach for bringing the dynamic issues into focus during concept selection, where the greatest payoff exists. Delaying consideration of the issues to the design phases creates many problems, not the least of which are the impacts levied against the payload community. Volumes of information exist from prior programs on these dynamic issues and serve as the guidelines for this paper.

Electrical design of payload G-534: The Pool Boiling Experiment

NASA Technical Reports Server (NTRS)

Francisco, David R.

1992-01-01

Payload G-534, the Pool Boiling Experiment (PBE), is a Get Away Special that is scheduled to fly on the shuttle in 1992. This paper will give a brief overall description of the experiment with the main discussion being the electrical design with a detailed description of the power system and interface to the GAS electronics. The batteries used and their interface to the experiment Power Control Unit (PCU) and GAS electronics will be examined. The design philosophy for the PCU will be discussed in detail. The criteria for selection of fuses, relays, power semiconductors and other electrical components along with grounding and shielding policy for the entire experiment will be presented. The intent of this paper is to discuss the use of military tested parts and basic design guidelines to build a quality experiment for minimal additional cost.

7 CFR 1940.552 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS (CONTINUED) GENERAL Methodology and Formulas for Allocation of Loan and Grant Program Funds § 1940..., funds will be controlled by the National Office. (b) Basic formula criteria, data source and weight. Basic formulas are used to calculate a basic state factor as a part of the methodology for allocating...

7 CFR 1940.552 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATIONS (CONTINUED) GENERAL Methodology and Formulas for Allocation of Loan and Grant Program Funds § 1940..., funds will be controlled by the National Office. (b) Basic formula criteria, data source and weight. Basic formulas are used to calculate a basic state factor as a part of the methodology for allocating...

7 CFR 1940.552 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATIONS (CONTINUED) GENERAL Methodology and Formulas for Allocation of Loan and Grant Program Funds § 1940..., funds will be controlled by the National Office. (b) Basic formula criteria, data source and weight. Basic formulas are used to calculate a basic state factor as a part of the methodology for allocating...

7 CFR 1940.552 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATIONS (CONTINUED) GENERAL Methodology and Formulas for Allocation of Loan and Grant Program Funds § 1940..., funds will be controlled by the National Office. (b) Basic formula criteria, data source and weight. Basic formulas are used to calculate a basic state factor as a part of the methodology for allocating...

Microwave Tissue Ablation: Biophysics, Technology and Applications

PubMed Central

2010-01-01

Microwave ablation is an emerging treatment option for many cancers, cardiac arrhythmias and other medical conditions. During treatment, microwaves are applied directly to tissues to produce rapid temperature elevations sufficient to produce immediate coagulative necrosis. The engineering design criteria for each application differ, with individual consideration for factors such as desired ablation zone size, treatment duration, and procedural invasiveness. Recent technological developments in applicator cooling, power control and system optimization for specific applications promise to increase the utilization of microwave ablation in the future. This article will review the basic biophysics of microwave tissue heating, provide an overview of the design and operation of current equipment, and outline areas for future research for microwave ablation. PMID:21175404

Safety Analysis of FMS/CTAS Interactions During Aircraft Arrivals

NASA Technical Reports Server (NTRS)

Leveson, Nancy G.

1998-01-01

This grant funded research on human-computer interaction design and analysis techniques, using future ATC environments as a testbed. The basic approach was to model the nominal behavior of both the automated and human procedures and then to apply safety analysis techniques to these models. Our previous modeling language, RSML, had been used to specify the system requirements for TCAS II for the FAA. Using the lessons learned from this experience, we designed a new modeling language that (among other things) incorporates features to assist in designing less error-prone human-computer interactions and interfaces and in detecting potential HCI problems, such as mode confusion. The new language, SpecTRM-RL, uses "intent" abstractions, based on Rasmussen's abstraction hierarchy, and includes both informal (English and graphical) specifications and formal, executable models for specifying various aspects of the system. One of the goals for our language was to highlight the system modes and mode changes to assist in identifying the potential for mode confusion. Three published papers resulted from this research. The first builds on the work of Degani on mode confusion to identify aspects of the system design that could lead to potential hazards. We defined and modeled modes differently than Degani and also defined design criteria for SpecTRM-RL models. Our design criteria include the Degani criteria but extend them to include more potential problems. In a second paper, Leveson and Palmer showed how the criteria for indirect mode transitions could be applied to a mode confusion problem found in several ASRS reports for the MD-88. In addition, we defined a visual task modeling language that can be used by system designers to model human-computer interaction. The visual models can be translated into SpecTRM-RL models, and then the SpecTRM-RL suite of analysis tools can be used to perform formal and informal safety analyses on the task model in isolation or integrated with the rest of the modeled system. We had hoped to be able to apply these modeling languages and analysis tools to a TAP air/ground trajectory negotiation scenario, but the development of the tools took more time than we anticipated.

45 CFR 1308.14 - Eligibility criteria: Learning disabilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Eligibility criteria: Learning disabilities. 1308... DISABILITIES Health Services Performance Standards § 1308.14 Eligibility criteria: Learning disabilities. (a) A child is classified as having a learning disability who has a disorder in one or more of the basic...

Optical memory development. Volume 1: prototype memory system

NASA Technical Reports Server (NTRS)

Cosentino, L. S.; Mezrich, R. S.; Nagle, E. M.; Stewart, W. C.; Wendt, F. S.

1972-01-01

The design, development, and implementation of a prototype, partially populated, million bit read-write holographic memory system using state-of-the-art components are described. The system employs an argon ion laser, acoustooptic beam deflectors, a holographic beam splitter (hololens), a nematic liquid crystal page composer, a photoconductor-thermoplastic erasable storage medium, a silicon P-I-N photodiode array, with lenses and electronics of both conventional and custom design. Operation of the prototype memory system was successfully demonstrated. Careful attention is given to the analysis from which the design criteria were developed. Specifications for the major components are listed, along with the details of their construction and performance. The primary conclusion resulting from this program is that the basic principles of read-write holographic memory system are well understood and are reducible to practice.

Guidelines for the use of fiberglass reinforced plastic in utility FGD systems. [Flue gas desulfurization (FGD); contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapoza, R.J.; Vollmer, H.R.; Haberly, K.L.

1992-11-01

Fiberglass reinforced plastic (FRP) materials offer excellent corrosion-resistant properties and long-term cost advantages compared to exotic alloys or organic lining systems. This guideline document provides potential buyers of FRP FGD (flue gas desulfurization) equipment with enough knowledge of FRP materials and methods to make informed decisions when procuring FRP equipment or services. It is divided into the following chapters: application criteria, procurement strategies, FRP basics, guidelines for designing FRP equipment, quality management. A glossary and manufacturers information/recommendations are included.

Apollo experience report: Real-time display system

NASA Technical Reports Server (NTRS)

Sullivan, C. J.; Burbank, L. W.

1976-01-01

The real time display system used in the Apollo Program is described; the systematic organization of the system, which resulted from hardware/software trade-offs and the establishment of system criteria, is emphasized. Each basic requirement of the real time display system was met by a separate subsystem. The computer input multiplexer subsystem, the plotting display subsystem, the digital display subsystem, and the digital television subsystem are described. Also described are the automated display design and the generation of precision photographic reference slides required for the three display subsystems.

Cross-sectional survey of California childbirth hospitals: implications for defining maternal levels of risk-appropriate care.

PubMed

Korst, Lisa M; Feldman, Daniele S; Bollman, D Lisa; Fridman, Moshe; El Haj Ibrahim, Samia; Fink, Arlene; Gregory, Kimberly D

2015-10-01

Measures of maternal mortality and severe maternal morbidity have risen in the United States, sparking national interest regarding hospitals' ability to provide maternal risk-appropriate care. We examined the extent to which hospitals could be classified by increasingly sophisticated maternal levels of care. We performed a cross-sectional survey to identify hospital-specific resources and classify hospitals by criteria for basic, intermediate, and regional maternal levels of care in all nonmilitary childbirth hospitals in California. We measured hospital compliance with maternal level of care criteria that were produced via consensus based on professional standards at 2 regional summits funded by the March of Dimes through a cooperative agreement with the Community Perinatal Network in 2007 (California Perinatal Summit on Risk-Appropriate Care). The response rate was 96% (239 of 248 hospitals). Only 82 hospitals (34%) were classifiable under these criteria (35 basic, 42 intermediate, and 5 regional) because most (157 [66%]) did not meet the required set of basic criteria. The unmet criteria preventing assignment into the basic category included the ability to perform a cesarean delivery within 30 minutes 100% of the time (only 64% met), pediatrician availability day and night (only 56% met), and radiology department ultrasound capability within 12 hours (only 83% met). Only 29 of classified hospitals (35%) had a nursery or neonatal intensive care unit level that matched the maternal level of care, and for most remaining hospitals (52 of 53), the neonatal intensive care unit level was higher than the maternal care level. Childbirth services varied widely across California hospitals, and most hospitals did not fit easily into proposed levels. Cognizance of this existing variation is critical to determining the optimal configuration of services for basic, intermediate, and regional maternal levels of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Multi-criteria decision assessments using Subjective Logic: Methodology and the case of urban water strategies

NASA Astrophysics Data System (ADS)

Moglia, Magnus; Sharma, Ashok K.; Maheepala, Shiroma

2012-07-01

SummaryPlanning of regional and urban water resources, and in particular with Integrated Urban Water Management approaches, often considers inter-relationships between human uses of water, the health of the natural environment as well as the cost of various management strategies. Decision makers hence typically need to consider a combination of social, environmental and economic goals. The types of strategies employed can include water efficiency measures, water sensitive urban design, stormwater management, or catchment management. Therefore, decision makers need to choose between different scenarios and to evaluate them against a number of criteria. This type of problem has a discipline devoted to it, i.e. Multi-Criteria Decision Analysis, which has often been applied in water management contexts. This paper describes the application of Subjective Logic in a basic Bayesian Network to a Multi-Criteria Decision Analysis problem. By doing this, it outlines a novel methodology that explicitly incorporates uncertainty and information reliability. The application of the methodology to a known case study context allows for exploration. By making uncertainty and reliability of assessments explicit, it allows for assessing risks of various options, and this may help in alleviating cognitive biases and move towards a well formulated risk management policy.

The research infrastructure of Chinese foundations, a database for Chinese civil society studies

PubMed Central

Ma, Ji; Wang, Qun; Dong, Chao; Li, Huafang

2017-01-01

This paper provides technical details and user guidance on the Research Infrastructure of Chinese Foundations (RICF), a database of Chinese foundations, civil society, and social development in general. The structure of the RICF is deliberately designed and normalized according to the Three Normal Forms. The database schema consists of three major themes: foundations’ basic organizational profile (i.e., basic profile, board member, supervisor, staff, and related party tables), program information (i.e., program information, major program, program relationship, and major recipient tables), and financial information (i.e., financial position, financial activities, cash flow, activity overview, and large donation tables). The RICF’s data quality can be measured by four criteria: data source reputation and credibility, completeness, accuracy, and timeliness. Data records are properly versioned, allowing verification and replication for research purposes. PMID:28742065

Studying feasibility and effects of a two-stage nursing staff training in residential geriatric care using a 30 month mixed-methods design [ISRCTN24344776].

PubMed

Betschon, Elsbeth; Brach, Michael; Hantikainen, Virpi

2011-05-31

Transfer techniques and lifting weights often cause back pain and disorders for nurses in geriatric care. The Kinaesthetics care conception claims to be an alternative, yielding benefits for nurses as well as for clients.Starting a multi-step research program on the effects of Kinaesthetics, we assess the feasibility of a two-stage nursing staff training and a pre-post research design. Using quantitative and qualitative success criteria, we address mobilisation from the bed to a chair and backwards, walking with aid and positioning in bed on the staff level as well as on the resident level. In addition, effect estimates should help to decide on and to prepare a controlled trial. Standard basic and advanced Kinaesthetics courses (each comprising four subsequent days and an additional counselling day during the following four months) are offered to n = 36 out of 60 nurses in a residential geriatric care home, who are in charge of 76 residents. N = 22 residents needing movement support are participating to this study.On the staff level, measurements include focus group discussions, questionnaires, physical strain self-assessment (Borg scale), video recordings and external observation of patient assistance skills using a specialised instrument (SOPMAS). Questionnaires used on the resident level include safety, comfort, pain, and level of own participation during mobilisation. A functional mobility profile is assessed using a specialised test procedure (MOTPA).Measurements will take place at baseline (T0), after basic training (T1), and after the advanced course (T2). Follow-up focus groups will be offered at T1 and 10 months later (T3). Ten criteria for feasibility success are established before the trial, assigned to resources (missing data), processes (drop-out of nurses and residents) and science (minimum effects) criteria. This will help to make rational decision on entering the next stage of the research program. Current Controlled Trials ISRCTN24344776.

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

45 CFR 46.111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applying knowledge gained in the research (for example, the possible effects of the research on public... 45 Public Welfare 1 2010-10-01 2010-10-01 false Criteria for IRB approval of research. 46.111... HUMAN SUBJECTS Basic HHS Policy for Protection of Human Research Subjects § 46.111 Criteria for IRB...

Job Enrichment: Possible Criteria for Application in Air Force Organizations.

ERIC Educational Resources Information Center

Clarke, Richard L.; Pesenti, Peter T.

The basic problem addressed by this thesis was the identification of specific criteria for determining the applicability of a job enrichment program in a specific career area. Identifying criteria involved the intrinsic and extrinsic aspects of a job, which act as determiners of job satisfaction or dissatisfaction. Survey data were obtained using…

Materials for a Stirling engine heater head

NASA Technical Reports Server (NTRS)

Noble, J. E.; Lehmann, G. A.; Emigh, S. G.

1990-01-01

Work done on the 25-kW advanced Stirling conversion system (ASCS) terrestrial solar program in establishing criteria and selecting materials for the engine heater head and heater tubes is described. Various mechanisms contributing to incompatibility between materials are identified and discussed. Large thermal gradients, coupled with requirements for long life (60,000 h at temperature) and a large number of heatup and cooldown cycles (20,000) drive the design from a structural standpoint. The pressurized cylinder is checked for creep rupture, localized yielding, reverse plasticity, creep and fatigue damage, and creep ratcheting, in addition to the basic requirements for bust and proof pressure. In general, creep rupture and creep and fatigue interaction are the dominant factors in the design. A wide range of materials for the heater head and tubes was evaluated. Factors involved in the assessment were strength and effect on engine efficiency, reliability, and cost. A preliminary selection of Inconel 713LC for the heater head is based on acceptable structural properties but driven mainly by low cost. The criteria for failure, the structural analysis, and the material characteristics with basis for selection are discussed.

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

Eco-Design of River Fishways for Upstream Passage: Application for Hanfeng Dam, Pengxi River, China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Gary E.; Rainey, William S.

2012-05-20

This paper provides a scientific approach to eco-design of river fishways to allow upstream movement of fish past new and existing dams in China. This eco-design approach integrates principles of fish ecology/behavior and engineering, a scientific field also known as bio-engineering or eco-hydraulics. We define a fishway as a structure or mechanism to convey fish upstream past a dam. Man-made or natural stream beds can be part of the fishway mechanism. Fish include bony and non-bony fishes, and upstream passage is the concern here, not downstream passage. The problem is dams block access to upstream habitat used for spawning, rearing,more » and refuge, i.e., dams decrease habitat connectivity. A solution to alleviate this problem is to design fishways, preferably while the dam is being designed, but if necessary, as retrofits afterward to provide a route that fish can and will use to pass safely upstream without undue delay. Our eco-design approach for fishways involves eight steps: 1) identify the primary species of importance; 2) understand basic ecology and behavior of these fish; 3) characterize the environmental conditions where passage is or will be blocked; 4 identify fishway alternatives and select a preferred alternative; 5) establish eco-design criteria for the fishway, either from management agencies or, if necessary, developed specifically for the given site; 6) where needed, identify and perform research required to resolve critical uncertainties and finalize the eco-design criteria; 7) apply the eco-design criteria and site-specific considerations to design the fishway, involving peer-review by local stakeholders in the process; 8) build the fishway, monitor its effectiveness, and apply the lessons learned. Example fishways are described showing a range of eco-designs depending on the dam site and fish species of concern. We apply the eco-design principles to recommend an approach and next steps for a fishway to pass fish upstream at Hanfeng Dam, an existing regulating dam forming Hanfeng Lake on the Pengxi River near Kaixian, China.« less

Electrical design of Space Shuttle payload G-534: The pool boiling experiment

NASA Technical Reports Server (NTRS)

Francisco, David R.

1993-01-01

Payload G-534, the Pool Boiling Experiment (PBE), is a Get Away Special (GAS) payload that flew on the Space Shuttle Spacelab Mission J (STS 47) on September 19-21, 1992. This paper will give a brief overall description of the experiment with the main discussion being the electrical design with a detailed description of the power system and interface to the GAS electronics. The batteries used and their interface to the experiment Power Control Unit (PCU) and GAS electronics will be examined. The design philosophy for the PCU will be discussed in detail. The criteria for selection of fuses, relays, power semiconductors, and other electrical components along with grounding and shielding policy for the entire experiment are presented. The intent of this paper is to discuss the use of military tested parts and basic design guidelines to build a quality experiment for minimal additional cost.

Refractories for high alkali environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rau, A.W.; Cloer, F.

1996-12-31

Information on refractories for high alkali environments is outlined. Information is presented on: product gallery; alkali attack; chemical reactions; basic layout of alkali cup test; criteria for rating alkali cup test samples; and basic layout of physical properties test.

Mathematical model for HIV spreads control program with ART treatment

NASA Astrophysics Data System (ADS)

Maimunah; Aldila, Dipo

2018-03-01

In this article, using a deterministic approach in a seven-dimensional nonlinear ordinary differential equation, we establish a mathematical model for the spread of HIV with an ART treatment intervention. In a simplified model, when no ART treatment is implemented, disease-free and the endemic equilibrium points were established analytically along with the basic reproduction number. The local stability criteria of disease-free equilibrium and the existing criteria of endemic equilibrium were analyzed. We find that endemic equilibrium exists when the basic reproduction number is larger than one. From the sensitivity analysis of the basic reproduction number of the complete model (with ART treatment), we find that the increased number of infected humans who follow the ART treatment program will reduce the basic reproduction number. We simulate this result also in the numerical experiment of the autonomous system to show how treatment intervention impacts the reduction of the infected population during the intervention time period.

Great Lakes Steel -- PCI facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eichinger, F.T.; Dake, S.H.; Wagner, E.D.

1997-12-31

This paper discusses the planning, design, and start-up of the 90 tph PCI facility for National Steel`s Great Lakes Steel Division in River Rouge, MI. This project is owned and operated by Edison Energy Services, and was implemented on a fast-track basis by Raytheon Engineers and Constructors, Babcock Material Handling, and Babcock and Wilcox. This paper presents important process issues, basic design criteria, an the challenges of engineering and building a state-of-the-art PCI facility in two existing plants. Pulverized coal is prepared at the River Rouge Power Plant of Detroit Edison, is pneumatically conveyed 6,000 feet to a storage silomore » at Great Lakes Steel, and is injected into three blast furnaces.« less

Minerals and design of new waste forms for conditioning nuclear waste

NASA Astrophysics Data System (ADS)

Montel, Jean-Marc

2011-02-01

Safe storage of radioactive waste is a major challenge for the nuclear industry. Mineralogy is a good basis for designing ceramics, which could eventually replace nuclear glasses. This requires a new storage concept: separation-conditioning. Basic rules of crystal chemistry allow one to select the most suitable structures and natural occurrences allow assessing the long-term performance of ceramics in a geological environment. Three criteria are of special interest: compatibility with geological environment, resistance to natural fluids, and effects of self-irradiation. If mineralogical information is efficient for predicting the behaviour of common, well-known minerals, such as zircon, monazite or apatite, more research is needed to rationalize the long-term behaviour of uncommon waste form analogs.

Government/Industry Workshop on Payload Loads Technology

NASA Technical Reports Server (NTRS)

1978-01-01

A fully operational space shuttle is discussed which will offer science the opportunity to explore near earth orbit and finally interplanetary space on nearly a limitless basis. This multiplicity of payload/experiment combinations and frequency of launches places many burdens on dynamicists to predict launch and landing environments accurately and efficiently. Two major problems are apparent in the attempt to design for the diverse environments: (1) balancing the design criteria (loads, etc.) between launch and orbit operations, and (2) developing analytical techniques that are reliable, accurate, efficient, and low cost to meet the challenge of multiple launches and payloads. This paper deals with the key issues inherent in these problems, the key trades required, the basic approaches needed, and a summary of the state-of-the-art techniques.

Experimental design, power and sample size for animal reproduction experiments.

PubMed

Chapman, Phillip L; Seidel, George E

2008-01-01

The present paper concerns statistical issues in the design of animal reproduction experiments, with emphasis on the problems of sample size determination and power calculations. We include examples and non-technical discussions aimed at helping researchers avoid serious errors that may invalidate or seriously impair the validity of conclusions from experiments. Screen shots from interactive power calculation programs and basic SAS power calculation programs are presented to aid in understanding statistical power and computing power in some common experimental situations. Practical issues that are common to most statistical design problems are briefly discussed. These include one-sided hypothesis tests, power level criteria, equality of within-group variances, transformations of response variables to achieve variance equality, optimal specification of treatment group sizes, 'post hoc' power analysis and arguments for the increased use of confidence intervals in place of hypothesis tests.

Prediction of passenger ride quality in a multifactor environment

NASA Technical Reports Server (NTRS)

Dempsey, T. K.; Leatherwood, J. D.

1976-01-01

A model being developed, permits the understanding and prediction of passenger discomfort in a multifactor environment with particular emphasis upon combined noise and vibration. The model has general applicability to diverse transportation systems and provides a means of developing ride quality design criteria as well as a diagnostic tool for identifying the vibration and/or noise stimuli causing discomfort. Presented are: (1) a review of the basic theoretical and mathematical computations associated with the model, (2) a discussion of methodological and criteria investigations for both the vertical and roll axes of vibration, (3) a description of within-axis masking of discomfort responses for the vertical axis, thereby allowing prediction of the total discomfort due to any random vertical vibration, (4) a discussion of initial data on between-axis masking, and (5) discussion of a study directed towards extension of the vibration model to the more general case of predicting ride quality in the combined noise and vibration environments.

Quantum computing with defects.

PubMed

Weber, J R; Koehl, W F; Varley, J B; Janotti, A; Buckley, B B; Van de Walle, C G; Awschalom, D D

2010-05-11

Identifying and designing physical systems for use as qubits, the basic units of quantum information, are critical steps in the development of a quantum computer. Among the possibilities in the solid state, a defect in diamond known as the nitrogen-vacancy (NV(-1)) center stands out for its robustness--its quantum state can be initialized, manipulated, and measured with high fidelity at room temperature. Here we describe how to systematically identify other deep center defects with similar quantum-mechanical properties. We present a list of physical criteria that these centers and their hosts should meet and explain how these requirements can be used in conjunction with electronic structure theory to intelligently sort through candidate defect systems. To illustrate these points in detail, we compare electronic structure calculations of the NV(-1) center in diamond with those of several deep centers in 4H silicon carbide (SiC). We then discuss the proposed criteria for similar defects in other tetrahedrally coordinated semiconductors.

Idiopathic inflammatory myopathies in adults: A comparative study of Bohan and Peter and European Neuromuscular Center 2004 criteria.

PubMed

Challa, Sundaram; Jakati, Saumya; Uppin, Megha S; Kannan, Meena A; Liza, Rajasekhar; Murthy Jagarlapudi, M K

2018-01-01

Bohan and Peter criteria are widely used for the diagnosis of idiopathic inflammatory myopathies (IIMs). Recently, European Neuromuscular Center (ENMC) formulated criteria to identify subgroups of IIMs. To compare the two diagnostic criteria in adult IIMs. This was a retrospective review of case records of histologically confirmed IIMs in adults between January 2014 and May 2015. Both the Bohan and Peter, and ENMC 2004 criteria were applied in the same group of patients to subgroup the IIMs. Muscle biopsy was evaluated in all the four domains: muscle fiber, inflammatory, connective tissue, and vascular, with the basic panel of histological stains. Sporadic inclusion body myositis (s-IBM) was diagnosed using ENMC IBM diagnostic research criteria 2011. During the study period, 69 patients fulfilled the ENMC criteria for IIMs including 16 patients with s-IBM. The subgrouping as per the ENMC criteria (53) was: dermatomyositis (DM) in 30; polymyositis (PM) in 2; immune-mediated necrotizing myopathy (IMNM) in 9; and nonspecific myositis (NM) in 12 patients, whereas subgrouping by the Bohan and Peter criteria was DM in 9 and PM with and without connective tissue disease (CTD) in 26 patients only. There was underdiagnosis of DM, as perifascicular atrophy is not recognized as a diagnostic histological feature, and overdiagnosis of PM with and without CTD due to poor characterization of histological features in PM by the Bohan and Peter criteria. Systematic evaluation of muscle biopsy according to the ENMC criteria with basic panel of histochemical stains improved the diagnostic yield of IIM significantly when compared to the Bohan and Peter criteria.

Agreement for NASA/OAST - USAF/AFSC space interdependency on spacecraft environment interaction

NASA Technical Reports Server (NTRS)

Pike, C. P.; Stevens, N. J.

1980-01-01

A joint AF/NASA comprehensive program on spacecraft environment interactions consists of combined contractual and in house efforts aimed at understanding spacecraft environment ineraction phenomena and relating ground test results to space conditions. Activities include: (1) a concerted effort to identify project related environmental interactions; (2) a materials investigation to measure the basic properties of materials and develop or modify materials as needed; and (3) a ground simulation investigation to evaluate basic plasma interaction phenomena and provide inputs to the analytical modeling investigation. Systems performance is evaluated by both ground tests and analysis. There is an environmental impact investigation to determine the effect of future large spacecraft on the charged particle environment. Space flight investigations are planned to verify the results. The products of this program are test standards and design guidelines which summarize the technology, specify test criteria, and provide techniques to minimize or eliminate system interactions with the charged particle environment.

Periodontal Research: Basics and beyond – Part II (Ethical issues, sampling, outcome measures and bias)

PubMed Central

Avula, Haritha

2013-01-01

A good research beginning refers to formulating a well-defined research question, developing a hypothesis and choosing an appropriate study design. The first part of the review series has discussed these issues in depth and this paper intends to throw light on other issues pertaining to the implementation of research. These include the various ethical norms and standards in human experimentation, the eligibility criteria for the participants, sampling methods and sample size calculation, various outcome measures that need to be defined and the biases that can be introduced in research. PMID:24174747

A study of volatile contaminants in recovered water

NASA Technical Reports Server (NTRS)

Mckee, H. C.; Marek, R., Jr.

1972-01-01

The recovery and reuse of water during long term space flight is discussed. Particular attention was given to obtaining basic information on the volatile impurities in urine samples and in water recovered from urine by distillation. Data also cover laboratory distillation tests to determine the nature and extent of volatile constituents in the distillate and an evaluation of possible problems in distillation due to iodine used for control of microbial contamination. Efforts made to develop design criteria for distillation equipment to minimize the problems of volatile contaminants various methods which might be used for purification subsequent to recovery are included.

Laser beam machining of polycrystalline diamond for cutting tool manufacturing

NASA Astrophysics Data System (ADS)

Wyszyński, Dominik; Ostrowski, Robert; Zwolak, Marek; Bryk, Witold

2017-10-01

The paper concerns application of DPSS Nd: YAG 532nm pulse laser source for machining of polycrystalline WC based diamond inserts (PCD). The goal of the research was to determine optimal laser cutting parameters for cutting tool shaping. Basic criteria to reach the goal was cutting edge quality (minimalization of finishing operations), material removal rate (time and cost efficiency), choice of laser beam characteristics (polarization, power, focused beam diameter). The research was planned and realised and analysed according to design of experiment rules (DOE). The analysis of the cutting edge was prepared with use of Alicona Infinite Focus measurement system.

Background Information and User Guide for MIL-F-8785C, Military Specification - Flying Qualities of Piloted Airplanes

DTIC Science & Technology

1982-07-01

Design Military Specification 20. ABSTRACT (Co.itInue o., revorse.• de if ,lec0O.•,•dr’ 1 Id•ntnify’’ bY bI. rk ,CI•,ti lim r) ’This document is published...criteria to Insert into the basic requirements, verification proceduresand leason: learned from past experience. The Standkerd will thus be the framework ...equations with sketch: Each of the three paired quantities in the de - nominators of KS and KR should have a hir over them, as is done in the numerators

The applied technologies to access clean water for remote communities

NASA Astrophysics Data System (ADS)

Rabindra, I. B.

2018-01-01

A lot of research is done to overcome the remote communities to access clean water, yet very little is utilized and implemented by the community. Various reasons can probably be made for, which is the application of research results is assessed less practical. The aims of this paper is seeking a practical approach, how to establish criteria for the design can be easier applied, at the proper locations, the simple construction, effectively producing a volume and quality of clean water designation. The methods used in this paper is a technological model assessment of treatment/filtering clean water produced a variety of previous research, to establish a model of appropriate technology for remote communities. Various research results collected from the study of literature, while the identification of opportunities and threats to its application is done using a SWOT analysis. This article discussion is looking for alternative models of clean water filtration technology from the previous research results, to be selected as appropriate technology, easily applied and bring of many benefits to the remote communities. The conclusions resulting from the discussion in this paper, expected to be used as the basic criteria of design model of clean water filtration technologies that can be accepted and applied effectively by the remote communities.

An Evaluation of the Employee Training and Development Process for Nicolet Area Technical College's Basic Education Program.

ERIC Educational Resources Information Center

Karl, Luis C.

The adult basic education (ABE) program at Nicolet Area Technical College (NATC) evaluated its training and development (T&D) process for new basic education instructors. The study gathered monitoring and screening criteria that addressed valuable components for use in an instrument for validating effectiveness of the ABE program (T&D)…

Guidelines and Capabilities for Designing Human Missions

NASA Technical Reports Server (NTRS)

2002-01-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Guidelines and Capabilities for Designing Human Missions

NASA Astrophysics Data System (ADS)

2002-03-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Space Storable Propellant Performance Gas/Liquid Like-Doublet Injector Characterization

NASA Technical Reports Server (NTRS)

Falk, A. Y.

1972-01-01

A 30-month applied research program was conducted, encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space-storable propellants. The gas/liquid propellant combination selected for study was FLOX (82.6% F2)/ambient temperature gaseous methane. The injector pattern characterized was the like-(self)-impinging doublet. Program effort was apportioned into four basic technical tasks: injector and thrust chamber design, injector and thrust chamber fabrication, performance evaluation testing, and data evaluation and reporting. Analytical parametric combustion analyses and cold flow distribution and atomization experiments were conducted with injector segment models to support design of injector/thrust chamber combinations for hot fire evaluation. Hot fire tests were conducted to: (1) optimize performance of the injector core elements, and (2) provide design criteria for the outer zone elements so that injector/thrust chamber compatibility could be achieved with only minimal performance losses.

Identification and application of criteria for determining National Register eligibility of roads in Virginia.

DOT National Transportation Integrated Search

2003-01-01

At present, there are no clear standards for applying National Register criteria to roads and for objectively researching and determining the National Register eligibility of roadways in Virginia. Basic historic documentation of Virginia roads is oft...

What is the responsibility of national government with respect to vaccination?

PubMed

Verweij, Marcel F; Houweling, Hans

2014-12-12

Given the ethical aspects of vaccination policies and current threats to public trust in vaccination, it is important that governments follow clear criteria for including new vaccines in a national programme. The Health Council of the Netherlands developed such a framework of criteria in 2007, and has been using this as basis for advisory reports about several vaccinations. However, general criteria alone offer insufficient ground and direction for thinking about what the state ought to do. In this paper, we present and defend two basic ethical principles that explain why certain vaccinations are the state's moral-political responsibility, and that may further guide decision-making about the content and character of immunisation programmes. First and foremost, the state is responsible for protecting the basic conditions for public health and societal life. Secondly, states are responsible for promoting and securing equal access to basic health care, which may also include certain vaccinations. We argue how these principles can find reasonable support from a broad variety of ethical and political views, and discuss several implications for vaccination policies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Considerations in the Derivation of Water Quality Criteria for Endocrine-disrupting Chemicals

EPA Science Inventory

When the USEPA’s 1985 guidelines for deriving numerical water quality criteria (WQC) for the protection of aquatic life were developed there was little anticipation that endocrine-disrupting chemicals (EDCs) would be come a widespread environmental issue. While the basic guidelin...

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... standards and to establish national criteria for dormitory situations for schools operated by the Bureau of Indian Affairs and for Indian-controlled contract schools operating dormitories. (b) The information...

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... standards and to establish national criteria for dormitory situations for schools operated by the Bureau of Indian Affairs and for Indian-controlled contract schools operating dormitories. (b) The information...

Space station proximity operations windows: Human factors design guidelines

NASA Technical Reports Server (NTRS)

Haines, Richard F.

1987-01-01

Proximity operations refers to all activities outside the Space Station which take place within a 1-km radius. Since there will be a large number of different operations involving manned and unmanned vehicles, single- and multiperson crews, automated and manually controlled flight, a wide variety of cargo, and construction/repair activities, accurate and continuous human monitoring of these operations from a specially designed control station on Space Station will be required. Total situational awareness will be required. This paper presents numerous human factors design guidelines and related background information for control windows which will support proximity operations. Separate sections deal with natural and artificial illumination geometry; all basic rendezvous vector approaches; window field-of-view requirements; window size; shape and placement criteria; window optical characteristics as they relate to human perception; maintenance and protection issues; and a comprehensive review of windows installed on U.S. and U.S.S.R. manned vehicles.

Results of design studies and wind tunnel tests of high-aspect-ratio supercritical wings for an energy efficient transport

NASA Technical Reports Server (NTRS)

Steckel, D. K.; Dahlin, J. A.; Henne, P. A.

1980-01-01

These basic characteristics of critical wings included wing area, aspect ratio, average thickness, and sweep as well as practical constraints on the planform and thickness near the wing root to allow for the landing gear. Within these constraints, a large matrix of wing designs was studied with spanwise variations in the types of airfoils and distribution of lift as well as some small planform changes. The criteria by which the five candidate wings were chosen for testing were the cruise and buffet characteristics in the transonic regime and the compatibility of the design with low speed (high-lift) requirements. Five wing-wide-body configurations were tested in the NASA Ames 11-foot transonic wind tunnel. Nacelles and pylons, flap support fairings, tail surfaces, and an outboard aileron were also tested on selected configurations.

[Structure of pain management facilities in Germany : Classification of medical and psychological pain treatment services-Consensus of the Joint Commission of the Professional Societies and Organizations for Quality in Pain Medicine].

PubMed

Müller-Schwefe, G H H; Nadstawek, J; Tölle, T; Nilges, P; Überall, M A; Laubenthal, H J; Bock, F; Arnold, B; Casser, H R; Cegla, T H; Emrich, O M D; Graf-Baumann, T; Henning, J; Horlemann, J; Kayser, H; Kletzko, H; Koppert, W; Längler, K H; Locher, H; Ludwig, J; Maurer, S; Pfingsten, M; Schäfer, M; Schenk, M; Willweber-Strumpf, A

2016-06-01

On behalf of the Medical/Psychological Pain Associations, Pain Patients Alliance and the Professional Association of Pain Physicians and Psychologists, the Joint Commission of Professional Societies and Organizations for Quality in Pain Medicine, working in close collaboration with the respective presidents, has developed verifiable structural and process-related criteria for the classification of medical and psychological pain treatment facilities in Germany. Based on the established system of graded care in Germany and on existing qualifications, these criteria also argue for the introduction of a basic qualification in pain medicine. In addition to the first-ever comprehensive description of psychological pain facilities, the criteria presented can be used to classify five different levels of pain facilities, from basic pain management facilities, to specialized institutions, to the Centre for Interdisciplinary Pain Medicine. The recommendations offer binding and verifiable criteria for quality assurance in pain medicine and improved pain treatment.

Dual methods and approximation concepts in structural synthesis

NASA Technical Reports Server (NTRS)

Fleury, C.; Schmit, L. A., Jr.

1980-01-01

Approximation concepts and dual method algorithms are combined to create a method for minimum weight design of structural systems. Approximation concepts convert the basic mathematical programming statement of the structural synthesis problem into a sequence of explicit primal problems of separable form. These problems are solved by constructing explicit dual functions, which are maximized subject to nonnegativity constraints on the dual variables. It is shown that the joining together of approximation concepts and dual methods can be viewed as a generalized optimality criteria approach. The dual method is successfully extended to deal with pure discrete and mixed continuous-discrete design variable problems. The power of the method presented is illustrated with numerical results for example problems, including a metallic swept wing and a thin delta wing with fiber composite skins.

Polymeric film application for phase change heat transfer

NASA Astrophysics Data System (ADS)

Bart, Hans-Jörg; Dreiser, Christian

2018-06-01

The paper gives a concise review on polymer film heat exchangers (PFHX) with a focus on polyether ether ketone (PEEK) foil as heat transfer element, mechanically supported by a grid structure. In order to promote PFHX applications, heat transfer performance and wetting behavior are studied in detail. Surface modifications to improve wetting are discussed and correlations are presented for critical Reynolds numbers to sustain a stable liquid film. Scaling phenomena related to surface properties and easily adaptable cleaning-in-place (CIP) procedures are further content. The contribution of the foil thickness and material selection on thermal performance is quantified and a correlation for enhanced aqueous film heat transfer for the grid supported PFHX is given. The basic research results and the design criteria enable early stage material selection and conceptual apparatus design.

Polymeric film application for phase change heat transfer

NASA Astrophysics Data System (ADS)

Bart, Hans-Jörg; Dreiser, Christian

2018-01-01

The paper gives a concise review on polymer film heat exchangers (PFHX) with a focus on polyether ether ketone (PEEK) foil as heat transfer element, mechanically supported by a grid structure. In order to promote PFHX applications, heat transfer performance and wetting behavior are studied in detail. Surface modifications to improve wetting are discussed and correlations are presented for critical Reynolds numbers to sustain a stable liquid film. Scaling phenomena related to surface properties and easily adaptable cleaning-in-place (CIP) procedures are further content. The contribution of the foil thickness and material selection on thermal performance is quantified and a correlation for enhanced aqueous film heat transfer for the grid supported PFHX is given. The basic research results and the design criteria enable early stage material selection and conceptual apparatus design.

Review: Optimization methods for groundwater modeling and management

NASA Astrophysics Data System (ADS)

Yeh, William W.-G.

2015-09-01

Optimization methods have been used in groundwater modeling as well as for the planning and management of groundwater systems. This paper reviews and evaluates the various optimization methods that have been used for solving the inverse problem of parameter identification (estimation), experimental design, and groundwater planning and management. Various model selection criteria are discussed, as well as criteria used for model discrimination. The inverse problem of parameter identification concerns the optimal determination of model parameters using water-level observations. In general, the optimal experimental design seeks to find sampling strategies for the purpose of estimating the unknown model parameters. A typical objective of optimal conjunctive-use planning of surface water and groundwater is to minimize the operational costs of meeting water demand. The optimization methods include mathematical programming techniques such as linear programming, quadratic programming, dynamic programming, stochastic programming, nonlinear programming, and the global search algorithms such as genetic algorithms, simulated annealing, and tabu search. Emphasis is placed on groundwater flow problems as opposed to contaminant transport problems. A typical two-dimensional groundwater flow problem is used to explain the basic formulations and algorithms that have been used to solve the formulated optimization problems.

Why noise-induced hearing loss of industrial workers is dramatic while that of similarly assessed musicians has been described as trivial

NASA Astrophysics Data System (ADS)

Bies, David

2005-09-01

Criteria for noise exposure considered acceptable for hearing protection are based upon industrial experience, yet these same criteria do not describe the experience of musicians. Investigation of the physics of the human ear reveals a basic design compromise that explains this anomaly. Acoustic stimulation is encoded in the velocity response of the basilar membrane, which makes possible the use of damping control to achieve the dynamic range of the ear. The use of damping control for this purpose without unacceptable distortions is possible if damping is slowly varying. The ear is free running and guided by previous instruction, making it vulnerable to loud impulsive sounds. To protect the ear the aural reflex is provided, but this protection is limited to frequencies below about 1 to 2 kHz. In the natural environment this design compromise is satisfactory, but in the industrial environment loud impulsive sounds are common and the compromise fails. It is to be noted that impulsive sounds of high frequency and level for which the ear has no defense, and which are not characteristic of music, are averaged to zero using standard assessment procedures.

Computer-Aided Sensor Development Focused on Security Issues.

PubMed

Bialas, Andrzej

2016-05-26

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research.

Computer-Aided Sensor Development Focused on Security Issues

PubMed Central

Bialas, Andrzej

2016-01-01

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research. PMID:27240360

Basic symptoms in the general population and in psychotic and non-psychotic psychiatric adolescents.

PubMed

Meng, Heiner; Schimmelmann, Benno Graf; Koch, Eginhard; Bailey, Barbara; Parzer, Peter; Günter, Michael; Mohler, Beat; Kunz, Natalia; Schulte-Markwort, Michael; Felder, Wilhelm; Zollinger, Rudolf; Bürgin, Dieter; Resch, Franz

2009-06-01

Cognitive-perceptive 'basic symptoms' are used complementary to ultra-high-risk criteria in order to predict onset of psychosis in the pre-psychotic phase. The aim was to investigate the prevalence of a broad selection of 'basic symptoms' in a representative general adolescent population sample (GPS; N=96) and to compare it with adolescents first admitted for early onset psychosis (EOP; N=87) or non-psychotic psychiatric disorders (NP; N=137). Subjects were assessed with the Bonn Scale for the Assessment of Basic Symptoms (BSABS). Prevalence of at least one 'basic symptom' and mean numbers were compared across the three groups. Logistic regression was used to predict group membership by BSABS subscales; risk ratios were calculated to identify 'basic symptoms' which best discriminated between groups. The prevalence of at least any one 'basic symptom' was 30.2% in GPS compared to 81% in NP and 96.5% in EOP. Correct classification of EOP when compared to GPS was high (94.0%) and lower when compared to NP (78.6%). Cognitive symptoms discriminated best between EOP and NP. Alike other prodromal- and psychotic-like experiences, 'basic symptoms' are prevalent in the general adolescent population, yet at a lower rate compared to EOP and NP. The usage of 'at least one basic symptom' as a screening criterion for youth at risk of developing a psychotic disorder is not recommended in the general population or in unselected psychiatrically ill adolescents. However, particularly cognitive 'basic symptoms' may be a valuable criteria to be included in future 'at risk' studies in adolescents.

14 CFR 1245.303 - Criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RIGHTS NASA Foreign Patent Program § 1245.303 Criteria. The following categories of inventions will be considered for the filing of patent applications by NASA in countries other than the United States: (a... satellites. (d) Inventions considered to be basic discoveries or of major significance in an art. (e...

14 CFR 1245.303 - Criteria.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RIGHTS NASA Foreign Patent Program § 1245.303 Criteria. The following categories of inventions will be considered for the filing of patent applications by NASA in countries other than the United States: (a... satellites. (d) Inventions considered to be basic discoveries or of major significance in an art. (e...

14 CFR 1245.303 - Criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RIGHTS NASA Foreign Patent Program § 1245.303 Criteria. The following categories of inventions will be considered for the filing of patent applications by NASA in countries other than the United States: (a... satellites. (d) Inventions considered to be basic discoveries or of major significance in an art. (e...

14 CFR 1245.303 - Criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RIGHTS NASA Foreign Patent Program § 1245.303 Criteria. The following categories of inventions will be considered for the filing of patent applications by NASA in countries other than the United States: (a... satellites. (d) Inventions considered to be basic discoveries or of major significance in an art. (e...

40 CFR 26.1111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Criteria for IRB approval of research. 26.1111 Section 26.1111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROTECTION OF HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving...

40 CFR 26.1111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Criteria for IRB approval of research. 26.1111 Section 26.1111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROTECTION OF HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving...

40 CFR 26.1111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Criteria for IRB approval of research. 26.1111 Section 26.1111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROTECTION OF HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving...

40 CFR 26.1111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Criteria for IRB approval of research. 26.1111 Section 26.1111 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROTECTION OF HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving...

The standard 20 AH battery. [for the mutlimission modular spacecraft

NASA Technical Reports Server (NTRS)

Zollner, M. T.

1977-01-01

The modular power system, which is the first intended use for the NASA standard battery, is basically a four foot by four foot by eighteen inch box which can handle a complement of three 20 ampere hour batteries or later on the intended use is for three 50 ampere hour batteries to be the full complement. The system is designed to be used as a plug on component on a multi mission modular spacecraft. It has as a design point a basically 1250 watt orbital average load. The way it breaks up in a near earth orbit it would be somewhere around 1,000 watts for everything except 10 minutes, and during any 10 minute period it may go up to a peak of 3,000 watt load. Features of the battery reviewed include criteria to store electrical energy, the battery package, the covers and cases, and electrolytes. The capacities expected are 90 percent, the average cell capacity for 24 C, 90 percent of the actual battery capacity of 19 C, and 85 percent of the actual 25 degree battery capacity at zero discharge voltage for 50 percent DOD new battery is in the vicinity expected or predicted of 26.4 volts.

Are schoolteachers able to teach first aid to children younger than 6 years? A comparative study

PubMed Central

Ammirati, Christine; Gagnayre, Rémi; Amsallem, Carole; Némitz, Bernard; Gignon, Maxime

2014-01-01

Objectives This study was designed to assess the knowledge acquired by very young children (<6 years) trained by their own teachers at nursery school. This comparative study assessed the effect of training before the age of 6 years compared with a group of age-matched untrained children. Setting Some schoolteachers were trained by emergency medical teams to perform basic first aid. Participants Eighteen classes comprising 315 pupils were randomly selected: nine classes of trained pupils (cohort C1) and nine classes of untrained pupils (cohort C2). Primary and secondary outcome measures The test involved observing and describing three pictures and using the phone to call the medical emergency centre. Assessment of each child was based on nine criteria, and was performed by the teacher 2 months after completion of first aid training. Results This study concerned 285 pupils: 140 trained and 145 untrained. The majority of trained pupils gave the expected answers for all criteria and reacted appropriately by assessing the situation and alerting emergency services (55.7−89.3% according to the questions). Comparison of the two groups revealed a significantly greater ability of trained pupils to describe an emergency situation (p<0.005) and raise the alert (p<0.0001). Conclusions This study shows the ability of very young children to assimilate basic skills as taught by their own schoolteachers. PMID:25239292

A Study on the Relationship between Design Elements of Outdoor Leisure Spaces and Types of Leisure Activities in Sustainable Community Development - A Case Study on Tainan, Taiwan

NASA Astrophysics Data System (ADS)

Chang, J. H.; Zhang, H.

2018-01-01

Sustainable community development encompasses three aspects: “Lifestyle”, “Production” and “Ecology”. Among them, “Lifestyle” is closest to people and reflects basic human needs. Creating outdoor spaces that encourage residents to engage in leisure activities will not only provide them with spiritual sustenance but also fulfil one of the key criteria in sustainable community development. This study explores the relationship between design elements of outdoor leisure spaces and types of leisure activities from residents' perspective with the goal to inform future spatial planning. The study collected 365 valid questionnaires from Tainan residents. Factor analysis was used to extract factors from design elements of outdoor leisure spaces, and regression analysis was applied to understand the effect level. The result shows design elements have positive effect on the types of leisure activities. In addition, different elements exert different influences on the choice of activities.

Integration of ecological-biological thresholds in conservation decision making.

PubMed

Mavrommati, Georgia; Bithas, Kostas; Borsuk, Mark E; Howarth, Richard B

2016-12-01

In the Anthropocene, coupled human and natural systems dominate and only a few natural systems remain relatively unaffected by human influence. On the one hand, conservation criteria based on areas of minimal human impact are not relevant to much of the biosphere. On the other hand, conservation criteria based on economic factors are problematic with respect to their ability to arrive at operational indicators of well-being that can be applied in practice over multiple generations. Coupled human and natural systems are subject to economic development which, under current management structures, tends to affect natural systems and cross planetary boundaries. Hence, designing and applying conservation criteria applicable in real-world systems where human and natural systems need to interact and sustainably coexist is essential. By recognizing the criticality of satisfying basic needs as well as the great uncertainty over the needs and preferences of future generations, we sought to incorporate conservation criteria based on minimal human impact into economic evaluation. These criteria require the conservation of environmental conditions such that the opportunity for intergenerational welfare optimization is maintained. Toward this end, we propose the integration of ecological-biological thresholds into decision making and use as an example the planetary-boundaries approach. Both conservation scientists and economists must be involved in defining operational ecological-biological thresholds that can be incorporated into economic thinking and reflect the objectives of conservation, sustainability, and intergenerational welfare optimization. © 2016 Society for Conservation Biology.

14 CFR § 1245.303 - Criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RIGHTS NASA Foreign Patent Program § 1245.303 Criteria. The following categories of inventions will be considered for the filing of patent applications by NASA in countries other than the United States: (a... satellites. (d) Inventions considered to be basic discoveries or of major significance in an art. (e...

Analysis of Orthopedic Resident Ability to Apply Levels of Evidence Criteria to Scientific Articles.

PubMed

Grandizio, Louis C; Shim, Stephanie S; Graham, Jove; Costopoulos, Callista; Cush, Gerard; Klena, Joel C

2016-01-01

In the era of evidence-based medicine, understanding study design and levels of evidence (LoE) criteria is an important component of resident education and aids practicing surgeons in making informed clinical decisions. The purpose of this study is to analyze the ability of orthopedic residents to accurately determine LoE criteria for published articles compared with medical students. Basic science article. Geisinger Medical Center (Danville, PA), tertiary referral center. Overall, 25 U.S. orthopedic residents and 15 4th year medical students interviewing for a residency position in orthopedic surgery voluntarily participated and provided baseline demographic information. A total of 15 articles from the American Volume of Journal of Bone and Joint Surgery were identified. Study participants were provided with the article title, the abstract, and the complete methods section. The assigned LoE designation was withheld and access to the LoE criteria used by Journal of Bone and Joint Surgery was provided. Each participant was assigned a study type and LoE designation for each article. There were more correct responses regarding the article type (67%) than for LoE designation (39%). For LoE, the intraclass correlation coefficient was 0.30. The percentage of correct responses for article type and LoE increased with more years of training (p = 0.005 and p = 0.002). Although residents had a higher proportion of correct LoE responses overall than medical students, this difference did not reach statistical significance (42% vs. 35%, p = 0.07). Although improvements in accurately determining both article type and LoE were seen among residents with increasing years of training, residents were unable to demonstrate a statistically significant improvement for determining LoE or article type when compared with medical students. Strategies to improve resident understanding of LoE guidelines need to be incorporated into orthopedic residencies, especially when considering the increased emphasis on evidence-based medicine. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... 36.1 Section 36.1 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... of this rule is to establish minimum academic standards for the basic education of Indian children...

25 CFR 36.95 - What sanitary standards must homeliving programs meet?

Code of Federal Regulations, 2010 CFR

2010-04-01

....95 Section 36.95 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... cleaned weekly; (d) Linens are to be provided; (e) Basic Toiletries must be provided; and (f) Functional...

Basic Emergency Medical Technician Skills Manual.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This manual was developed to help students preparing to become emergency medical technicians (EMTs) learn standardized basic skills in the field. The manual itemizes the steps and performance criteria of each required skill and uses an accompanying videotape series (not included) to enhance the educational experience. The five units of the manual,…

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2014-10-01 2014-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2013-10-01 2013-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2012-10-01 2012-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Combining ascent loads

NASA Technical Reports Server (NTRS)

Houbolt, J. C.

1972-01-01

Criteria and guidelines are presented for combining loads that develop during the ascent phase of a space flight. The primary load-caring structure is discussed including the basic tank and interconnecting members, engine support mounts and connections to tank structure, transition structures between stages, payload shrouds, and the basic support points at separation planes.

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... of this rule is to establish minimum academic standards for the basic education of Indian children... ascertain the approval of academic waiver request. The obligation to respond is mandatory under 25 U.S.C...

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... of this rule is to establish minimum academic standards for the basic education of Indian children... ascertain the approval of academic waiver request. The obligation to respond is mandatory under 25 U.S.C...

Finite element analysis of high aspect ratio wind tunnel wing model: A parametric study

NASA Astrophysics Data System (ADS)

Rosly, N. A.; Harmin, M. Y.

2017-12-01

Procedure for designing the wind tunnel model of a high aspect ratio (HAR) wing containing geometric nonlinearities is described in this paper. The design process begins with identification of basic features of the HAR wing as well as its design constraints. This enables the design space to be narrowed down and consequently, brings ease of convergence towards the design solution. Parametric studies in terms of the spar thickness, the span length and the store diameter are performed using finite element analysis for both undeformed and deformed cases, which respectively demonstrate the linear and nonlinear conditions. Two main criteria are accounted for in the selection of the wing design: the static deflections due to gravitational loading should be within the allowable margin of the size of the wind tunnel test section and the flutter speed of the wing should be much below the maximum speed of the wind tunnel. The findings show that the wing experiences a stiffness hardening effect under the nonlinear static solution and the presence of the store enables significant reduction in linear flutter speed.

Spacelab energetic ion mass spectrometer

NASA Technical Reports Server (NTRS)

Whalen, B. A.; Mcdiarmid, I. B.; Burrows, J. R.; Sharp, R. D.; Johnson, R. G.; Shelley, E. G.

1980-01-01

Basic design criteria are given for an ion mass spectrometer for use in studying magnetospheric ion populations. The proposed instrument is composed of an electrostatic analyzer followed by a magnetic spectrometer and simultaneously measures the energy per unit and mass per unit charge of the ion species. An electromagnet is used for momentum analysis to extend the operational energy range over a much wider domain than is possible with the permanent magnets used in previous flights. The energetic ion source regions, ion energization mechanisms, field line tracing, coordinated investigations, and orbit considerations are discussed and operations of the momentum analyzer and of the electrostatic energy analyzer are examined.

Microbial Check Valve for Shuttle

NASA Technical Reports Server (NTRS)

Colombo, G. V.; Putnam, D. F.; Sauer, R. L.

1978-01-01

The Microbial Check Valve (MCV) is a device developed for the Space Shuttle that prevents the transfer of viable microorganisms within water systems. The device is essentially a bed of resin material, impregnated with iodine, that kills microorganisms on contact. It prevents the cross-contamination of microorganisms from a nonpotable system into the potable water system when these systems are interconnected. In this regard, the function of the device is similar to that of the 'air gap' found in conventional one-gravity systems. Basic design data are presented including pressure drop, scaling factors, sizing criteria, and the results of challenging the device with suspensions of seven microorganisms including aerobes, anaerobes and spore formers.

OMPS Limb Profiler Instrument Performance Assessment

NASA Technical Reports Server (NTRS)

Jaross, Glen R.; Bhartia, Pawan K.; Chen, Grace; Kowitt, Mark; Haken, Michael; Chen, Zhong; Xu, Philippe; Warner, Jeremy; Kelly, Thomas

2014-01-01

Following the successful launch of the Ozone Mapping and Profiler Suite (OMPS) aboard the Suomi National Polar-orbiting Partnership (SNPP) spacecraft, the NASA OMPS Limb team began an evaluation of instrument and data product performance. The focus of this paper is the instrument performance in relation to the original design criteria. Performance that is closer to expectations increases the likelihood that limb scatter measurements by SNPP OMPS and successor instruments can form the basis for accurate long-term monitoring of ozone vertical profiles. The team finds that the Limb instrument operates mostly as designed and basic performance meets or exceeds the original design criteria. Internally scattered stray light and sensor pointing knowledge are two design challenges with the potential to seriously degrade performance. A thorough prelaunch characterization of stray light supports software corrections that are accurate to within 1% in radiances up to 60 km for the wavelengths used in deriving ozone. Residual stray light errors at 1000nm, which is useful in retrievals of stratospheric aerosols, currently exceed 10%. Height registration errors in the range of 1 km to 2 km have been observed that cannot be fully explained by known error sources. An unexpected thermal sensitivity of the sensor also causes wavelengths and pointing to shift each orbit in the northern hemisphere. Spectral shifts of as much as 0.5nm in the ultraviolet and 5 nm in the visible, and up to 0.3 km shifts in registered height, must be corrected in ground processing.

Influence of unsteady aerodynamics on driving dynamics of passenger cars

NASA Astrophysics Data System (ADS)

Huemer, Jakob; Stickel, Thomas; Sagan, Erich; Schwarz, Martin; Wall, Wolfgang A.

2014-11-01

Recent approaches towards numerical investigations with computational fluid dynamics methods on unsteady aerodynamic loads of passenger cars identified major differences compared with steady-state aerodynamic excitations. Furthermore, innovative vehicle concepts such as electric-vehicles or hybrid drives further challenge the basic layout of passenger cars. Therefore, the relevance of unsteady aerodynamic loads on cross-wind stability of changing basic vehicle architectures should be analysed. In order to assure and improve handling and ride characteristics at high velocity of the actual range of vehicle layouts, the influence of unsteady excitations on the vehicle response was investigated. For this purpose, a simulation of the vehicle dynamics through multi-body simulation was used. The impact of certain unsteady aerodynamic load characteristics on the vehicle response was quantified and key factors were identified. Through a series of driving simulator tests, the identified differences in the vehicle response were evaluated regarding their significance on the subjective driver perception of cross-wind stability. Relevant criteria for the subjective driver assessment of the vehicle response were identified. As a consequence, a design method for the basic layout of passenger cars and chassis towards unsteady aerodynamic excitations was defined.

Construction of an evidence-based, graduated training curriculum for D-box, a webcam-based laparoscopic basic skills trainer box.

PubMed

Debes, Anders J; Aggarwal, Rajesh; Balasundaram, Indran; Jacobsen, Morten B J

2012-06-01

Surgical training programs are now including simulators as training tools for teaching laparoscopic surgery. The aim of this study was to develop a standardized, graduated, and evidence-based curriculum for the newly developed D-box (D-box Medical, Lier, Norway) for training basic laparoscopic skills. Eighteen interns with no laparoscopic experience completed a training program on the D-box consisting of 8 sessions of 5 tasks with assessment on a sixth task. Performance was measured by the use of 3-dimensional electromagnetic tracking of hand movements, path length, and time taken. Ten experienced surgeons (>100 laparoscopic surgeries, median 250) were recruited for establishing benchmark criteria. Significant learning curves were obtained for all construct valid parameters for tasks 4 (P < .005) and 5 (P < .005) and reached plateau levels between the fifth and sixth session. Within the 8 sessions of this study, between 50% and 89% of the interns reached benchmark criteria on tasks 4 and 5. Benchmark criteria and an evidence-based curriculum have been developed for the D-box. The curriculum is aimed at training and assessing surgical novices in basic laparoscopic skills. Copyright © 2012 Elsevier Inc. All rights reserved.

An alternative regionalization scheme for defining nutrient criteria for rivers and streams

USGS Publications Warehouse

Robertson, Dale M.; Saad, David A.; Wieben, Ann M.

2001-01-01

The environmental nutrient zone approach can be applied to specific states or nutrient ecoregions and used to develop criteria as a function of stream type. This approach can also be applied on the basis of environmental characteristics of the watershed alone rather than the general environmental characteristics from the region in which the site is located. The environmental nutrient zone approach will enable states to refine the basic nutrient criteria established by the USEPA by developing attainable criteria given the environmental characteristics where the streams are located.

Criteria for Evaluating the Performance of Compilers

DTIC Science & Technology

1974-10-01

cannot be made to fit, then an auxiliary mechanism outside the parser might be used . Finally, changing the choice of parsing tech - nique to a...was not useful in providing a basic for compiler evaluation. The study of the first question eztablished criteria and methodb for assigning four...program. The study of the second question estab- lished criteria for defining a "compiler Gibson mix", and established methods for using this "mix" to

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2010 CFR

2010-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources MINERALS MANAGEMENT SERVICE... drilling design criteria address? Your description of well drilling design criteria must address: (a) Pore... phases, including the anticipated surface pressure used for designing the production string; (g) A single...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2013 CFR

2013-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2012 CFR

2012-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2014 CFR

2014-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

[Basic questionnaire and methodological criteria for Surveys on Working Conditions, Employment, and Health in Latin America and the Caribbean].

PubMed

Benavides, Fernando G; Merino-Salazar, Pamela; Cornelio, Cecilia; Assunção, Ada Avila; Agudelo-Suárez, Andrés A; Amable, Marcelo; Artazcoz, Lucía; Astete, Jonh; Barraza, Douglas; Berhó, Fabián; Milián, Lino Carmenate; Delclòs, George; Funcasta, Lorena; Gerke, Johanna; Gimeno, David; Itatí-Iñiguez, María José; Lima, Eduardo de Paula; Martínez-Iñigo, David; Medeiros, Adriane Mesquita de; Orta, Lida; Pinilla, Javier; Rodrigo, Fernando; Rojas, Marianela; Sabastizagal, Iselle; Vallebuona, Clelia; Vermeylen, Greet; Villalobos, Gloria H; Vives, Alejandra

2016-10-10

This article aimed to present a basic questionnaire and minimum methodological criteria for consideration in future Surveys on Working Conditions, Employment, and Health in Latin America and the Caribbean. A virtual and face-to-face consensus process was conducted with participation by a group of international experts who used the surveys available up until 2013 as the point of departure for defining the proposal. The final questionnaire included 77 questions grouped in six dimensions: socio-demographic characteristics of workers and companies; employment conditions; working conditions; health status; resources and preventive activities; and family characteristics. The minimum methodological criteria feature the interviewee's home as the place for the interview and aspects related to the quality of the fieldwork. These results can help improve the comparability of future surveys in Latin America and the Caribbean, which would in turn help improve information on workers' heath in the region.

Spaced-based search coil magnetometers

NASA Astrophysics Data System (ADS)

Hospodarsky, George B.

2016-12-01

Search coil magnetometers are one of the primary tools used to study the magnetic component of low-frequency electromagnetic waves in space. Their relatively small size, mass, and power consumption, coupled with a good frequency range and sensitivity, make them ideal for spaceflight applications. The basic design of a search coil magnetometer consists of many thousands of turns of wire wound on a high permeability core. When a time-varying magnetic field passes through the coil, a time-varying voltage is induced due to Faraday's law of magnetic induction. The output of the coil is usually attached to a preamplifier, which amplifies the induced voltage and conditions the signal for transmission to the main electronics (usually a low-frequency radio receiver). Search coil magnetometers are usually used in conjunction with electric field antenna to measure electromagnetic plasma waves in the frequency range of a few hertz to a few tens of kilohertzs. Search coil magnetometers are used to determine the properties of waves, such as comparing the relative electric and magnetic field amplitudes of the waves, or to investigate wave propagation parameters, such as Poynting flux and wave normal vectors. On a spinning spacecraft, they are also sometimes used to determine the background magnetic field. This paper presents some of the basic design criteria of search coil magnetometers and discusses design characteristics of sensors flown on a number of spacecraft.

Basic priority rating model 2.0: current applications for priority setting in health promotion practice.

PubMed

Neiger, Brad L; Thackeray, Rosemary; Fagen, Michael C

2011-03-01

Priority setting is an important component of systematic planning in health promotion and also factors into the development of a comprehensive evaluation plan. The basic priority rating (BPR) model was introduced more than 50 years ago and includes criteria that should be considered in any priority setting approach (i.e., use of predetermined criteria, standardized comparisons, and a rubric that controls bias). Although the BPR model has provided basic direction in priority setting, it does not represent the broad array of data currently available to decision makers. Elements in the model also give more weight to the impact of communicable diseases compared with chronic diseases. For these reasons, several modifications are recommended to improve the BPR model and to better assist health promotion practitioners in the priority setting process. The authors also suggest a new name, BPR 2.0, to represent this revised model.

Investigation of a low NOx full-scale annular combustor

NASA Technical Reports Server (NTRS)

1982-01-01

An atmospheric test program was conducted to evaluate a low NOx annular combustor concept suitable for a supersonic, high-altitude aircraft application. The lean premixed combustor, known as the vortex air blast (VAB) concept, was tested as a 22.0-cm diameter model in the early development phases to arrive at basic design and performance criteria. Final demonstration testing was carried out on a full scale combustor of 0.66-m diameter. Variable geometry dilution ports were incorporated to allow operation of the combustor across the range of conditions between idle (T(in) = 422 K, T(out) = 917 K) and cruise (T(in) = 833 K, T(out) - 1778 K). Test results show that the design could meet the program NOx goal of 1.0 g NO2/kg fuel at a one-atmospheric simulated cruise condition.

7 CFR 1940.592 - Community facilities grants.

Code of Federal Regulations, 2010 CFR

2010-01-01

...). (b) Basic formula criteria, data source, and weight. See § 1940.552(b). (1) The criteria used in the... percentage of National rural population with income below the poverty level—50 percent. (2) Data source for each of these criterion is based on the latest census data available. Each criterion is assigned a...

Comparative Costs of Manpower Education: A Methodological Study.

ERIC Educational Resources Information Center

Lyman, Jay Rich

The objective of this study was to establish a criteria and model for comparative evaluation of manpower educational programs. The criteria developed deals with resource allocation in manpower education programs and how well those programs meet the needs of industry. In the proposed model, an occupation is reduced to its basic skills, which are…

34 CFR 97.111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2010 CFR

2010-07-01

... possible long-range effects of applying knowledge gained in the research (for example, the possible effects... 34 Education 1 2010-07-01 2010-07-01 false Criteria for IRB approval of research. 97.111 Section... Federal Policy for the Protection of Human Subjects (Basic ED Policy for Protection of Human Research...

40 CFR 26.111 - Criteria for IRB approval of research.

Code of Federal Regulations, 2010 CFR

2010-07-01

... possible long-range effects of applying knowledge gained in the research (for example, the possible effects... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Criteria for IRB approval of research... HUMAN SUBJECTS Basic EPA Policy for Protection of Subjects in Human Research Conducted or Supported by...

Basic principles of decision making in natural resources and the environment

Treesearch

Daniel L. Schmoldt; Jyrki Kangas; G.A. Mendoza

2001-01-01

As public land management merges biophysical, social, and economic objectives, management decision criteria become more extensive. Many of these criteria are value-laden, and yet are not easily expressed in monetary terms. Utility theory has traditionally been the decision model proffered by the management science and operations research communities. More recently,...

Affective Responses of Community College Students to Self-Selected Criteria of Success.

ERIC Educational Resources Information Center

Easton, John Q.

A study was conducted at the City Colleges of Chicago to investigate how individual expectations and self-selected criteria for success correlate with academic self-concept and course achievement. At the beginning and end of the fall semester, students enrolled in six basic mathematics classes completed questionnaires containing the Michigan State…

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2013 CFR

2013-04-01

... the BIE and the Indian Health Service or between a tribally-operated homeliving program and the Indian Health Service or tribal health program. (b) A homeliving program must have written procedures for... MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

The Use of Basic Writing Materials in ESL Writing Classes.

ERIC Educational Resources Information Center

England, Lizabeth

Similarities between the weaknesses found among English as a first language students and English as a second language (ESL) students suggest the need to use basic writing materials with English as a second language students. Prewriting materials should be chosen in an effort to teach students some criteria for analyzing, evaluating, and…

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2010 CFR

2010-04-01

... MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... necessary health services for all students residing in the homeliving program, subject to agreements between... dealing with emergency health care issues. (c) Parents or guardians may opt out of any non-emergency...

Design and Fabrication of the NASA Decoupler Pylon for the F-16 Aircraft

NASA Technical Reports Server (NTRS)

Clayton, J. D.; Haller, R. L.; Hassler, J. M., Jr.

1985-01-01

The NASA Decoupler Pylon is a passive means of suppressing wing-store flutter. The feasibility of demonstrating this concept on the F-16 aircraft was established through model wind tunnel tests and analyses. As a result of these tests and studies a ship set of Decoupler Pylons was designed and fabricated for a flight test demonstration on the F-16 aircraft. Basic design criteria were developed during the analysis study pertaining to pylon pitch stiffness, alignment system requirements, and damping requirements. A design was developed which utilized an electrical motor for the pylon alignment system. The design uses a four pin, two link pivot design which results in a remote pivot located at the center of gravity of the store when the store is in the aligned position. The pitch spring was fabricated from a tapered constant stress cantilevered beam. The pylon has the same external lines as the existing production pylon and is designed to use a MAU-12 ejection rack which is the same as the one used with the production pylon. The detailed design and fabrication was supported with a complete ground test of the pylon prior to shipment to NASA.

Convenient stability criteria for difference approximations of hyperbolic initial-boundary value problems

NASA Technical Reports Server (NTRS)

Goldberg, M.; Tadmor, E.

1985-01-01

New convenient stability criteria are provided in this paper for a large class of finite difference approximations to initial-boundary value problems associated with the hyperbolic system u sub t = au sub x + Bu + f in the quarter plane x or = 0, t or = 0. Using the new criteria, stability is easily established for numerous combinations of well known basic schemes and boundary conditins, thus generalizing many special cases studied in recent literature.

Convenient stability criteria for difference approximations of hyperbolic initial-boundary value problems

NASA Technical Reports Server (NTRS)

Goldberg, M.; Tadmor, E.

1983-01-01

New convenient stability criteria are provided in this paper for a large class of finite difference approximations to initial-boundary value problems associated with the hyperbolic system u sub t = au sub x + Bu + f in the quarter plane x or = 0, t or = 0. Using the new criteria, stability is easily established for numerous combinations of well known basic schemes and boundary conditions, thus generalizing many special cases studied in recent literature.

Resource Conservation and Recovery Act, Part B Permit Application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 5, Chapter D, Appendix D1 (conclusion), Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Neville G.W.; Heuze, Francois E.; Miller, Hamish D.S.

1993-03-01

The reference design for the underground facilities at the Waste Isolation Pilot Plant was developed using the best criteria available at initiation of the detailed design effort. These design criteria are contained in the US Department of Energy document titled Design Criteria, Waste Isolation Pilot Plant (WIPP). Revised Mission Concept-IIA (RMC-IIA), Rev. 4, dated February 1984. The validation process described in the Design Validation Final Report has resulted in validation of the reference design of the underground openings based on these criteria. Future changes may necessitate modification of the Design Criteria document and/or the reference design. Validation of the referencemore » design as presented in this report permits the consideration of future design or design criteria modifications necessitated by these changes or by experience gained at the WIPP. Any future modifications to the design criteria and/or the reference design will be governed by a DOE Standard Operation Procedure (SOP) covering underground design changes. This procedure will explain the process to be followed in describing, evaluating and approving the change.« less

Flying qualities design criteria applicable to supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Chalk, C. R.

1980-01-01

A comprehensive set of flying qualities design criteria was prepared for use in the supersonic cruise research program. The framework for stating the design criteria is established and design criteria are included which address specific failures, approach to dangerous flight conditions, flight at high angle of attack, longitudinal and lateral directional stability and control, the primary flight control system, and secondary flight controls. Examples are given of lateral directional design criteria limiting lateral accelerations at the cockpit, time to roll through 30 deg of bank, and time delay in the pilot's command path. Flight test data from the Concorde certification program are used to substantiate a number of the proposed design criteria.

Computer programs: Mechanical and structural design criteria: A compilation

NASA Technical Reports Server (NTRS)

1973-01-01

Computerized design criteria for turbomachinery and the constraints imposed by very high rotational fields are presented along with a variety of computerized design criteria of interest to structural designers.

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Link, H.; Keller, J.; Guo, Y.

2013-04-01

Gearboxes in wind turbines have not been achieving their expected design life even though they commonly meet or exceed the design criteria specified in current design standards. One of the basic premises of the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is that the low gearbox reliability results from the absence of critical elements in the design process or insufficient design tools. Key goals of the GRC are to improve design approaches and analysis tools and to recommend practices and test methods resulting in improved design standards for wind turbine gearboxes that lower the cost of energy (COE)more » through improved reliability. The GRC uses a combined gearbox testing, modeling and analysis approach, along with a database of information from gearbox failures collected from overhauls and investigation of gearbox condition monitoring techniques to improve wind turbine operations and maintenance practices. Testing of Gearbox 2 (GB2) using the two-speed turbine controller that has been used in prior testing. This test series will investigate non-torque loads, high-speed shaft misalignment, and reproduction of field conditions in the dynamometer. This test series will also include vibration testing using an eddy-current brake on the gearbox's high speed shaft.« less

34 CFR 461.22 - What criteria does the Secretary use in approving a State's description of efforts relating to...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT PROGRAM How Does... 34 Education 3 2013-07-01 2013-07-01 false What criteria does the Secretary use in approving a...

34 CFR 461.22 - What criteria does the Secretary use in approving a State's description of efforts relating to...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT PROGRAM How Does... 34 Education 3 2012-07-01 2012-07-01 false What criteria does the Secretary use in approving a...

34 CFR 461.22 - What criteria does the Secretary use in approving a State's description of efforts relating to...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT PROGRAM How Does... 34 Education 3 2010-07-01 2010-07-01 false What criteria does the Secretary use in approving a...

34 CFR 461.22 - What criteria does the Secretary use in approving a State's description of efforts relating to...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT PROGRAM How Does... 34 Education 3 2014-07-01 2014-07-01 false What criteria does the Secretary use in approving a...

34 CFR 426.22 - What selection criteria does the Secretary use for the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION... homemaking education programs and the integration of basic skills in consumer and homemaking education... 34 Education 3 2014-07-01 2014-07-01 false What selection criteria does the Secretary use for the...

34 CFR 461.22 - What criteria does the Secretary use in approving a State's description of efforts relating to...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT PROGRAM How Does... 34 Education 3 2011-07-01 2011-07-01 false What criteria does the Secretary use in approving a...

34 CFR 426.22 - What selection criteria does the Secretary use for the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION... homemaking education programs and the integration of basic skills in consumer and homemaking education... 34 Education 3 2012-07-01 2012-07-01 false What selection criteria does the Secretary use for the...

34 CFR 426.22 - What selection criteria does the Secretary use for the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2013 CFR

2013-07-01

... of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION... homemaking education programs and the integration of basic skills in consumer and homemaking education... 34 Education 3 2013-07-01 2013-07-01 false What selection criteria does the Secretary use for the...

34 CFR 426.22 - What selection criteria does the Secretary use for the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2011 CFR

2011-07-01

... of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION... homemaking education programs and the integration of basic skills in consumer and homemaking education... 34 Education 3 2011-07-01 2011-07-01 false What selection criteria does the Secretary use for the...

Are schoolteachers able to teach first aid to children younger than 6 years? A comparative study.

PubMed

Ammirati, Christine; Gagnayre, Rémi; Amsallem, Carole; Némitz, Bernard; Gignon, Maxime

2014-09-19

This study was designed to assess the knowledge acquired by very young children (<6 years) trained by their own teachers at nursery school. This comparative study assessed the effect of training before the age of 6 years compared with a group of age-matched untrained children. Some schoolteachers were trained by emergency medical teams to perform basic first aid. Eighteen classes comprising 315 pupils were randomly selected: nine classes of trained pupils (cohort C1) and nine classes of untrained pupils (cohort C2). The test involved observing and describing three pictures and using the phone to call the medical emergency centre. Assessment of each child was based on nine criteria, and was performed by the teacher 2 months after completion of first aid training. This study concerned 285 pupils: 140 trained and 145 untrained. The majority of trained pupils gave the expected answers for all criteria and reacted appropriately by assessing the situation and alerting emergency services (55.7-89.3% according to the questions). Comparison of the two groups revealed a significantly greater ability of trained pupils to describe an emergency situation (p<0.005) and raise the alert (p<0.0001). This study shows the ability of very young children to assimilate basic skills as taught by their own schoolteachers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Path analysis of the energy density of wood in eucalyptus clones.

PubMed

Couto, A M; Teodoro, P E; Trugilho, P F

2017-03-16

Path analysis has been used for establishing selection criteria in genetic breeding programs for several crops. However, it has not been used in eucalyptus breeding programs yet. In the present study, we aimed to identify the wood technology traits that could be used as the criteria for direct and indirect selection of eucalyptus genotypes with high energy density of wood. Twenty-four eucalyptus clones were evaluated in a completely randomized design with five replications. The following traits were assessed: basic wood density, total extractives, lignin content, ash content, nitrogen content, carbon content, hydrogen content, sulfur content, oxygen content, higher calorific power, holocellulose, and energy density. After verifying the variability of all evaluated traits among the clones, a two-dimensional correlation network was used to determine the phenotypic patterns among them. The obtained coefficient of determination (0.94) presented a higher magnitude in relation to the effect of the residual variable, and it served as an excellent model for explaining the genetic effects related to the variations observed in the energy density of wood in all eucalyptus clones. However, for future studies, we recommend evaluating other traits, especially the morphological traits, because of the greater ease in their measurement. Selecting clones with high basic density is the most promising strategy for eucalyptus breeding programs that aim to increase the energy density of wood because of its high heritability and magnitude of the cause-and-effect relationship with this trait.

Pressure losses and heat transfer in non-circular channels with hydraulically smooth walls

NASA Technical Reports Server (NTRS)

Malak, J.

1982-01-01

The influence of channel geometry on pressure losses and heat transfer in noncircular channels with hydraulically smooth walls was studied. As a basic assumption for the description of this influence, integral geometrical criteria, selected according to experimental experience, were introduced. Using these geometrical criteria, a large set of experimental data for pressure losses and heat transfer in circular and annular channels with longitudinal fins was evaluated. In this way it as empirically proved that the criteria described channel geometry fairly well.

Storage and retrieval of digital images in dermatology.

PubMed

Bittorf, A; Krejci-Papa, N C; Diepgen, T L

1995-11-01

Differential diagnosis in dermatology relies on the interpretation of visual information in the form of clinical and histopathological images. Up until now, reference images have had to be retrieved from textbooks and/or appropriate journals. To overcome inherent limitations of those storage media with respect to the number of images stored, display, and search parameters available, we designed a computer-based database of digitized dermatologic images. Images were taken from the photo archive of the Dermatological Clinic of the University of Erlangen. A database was designed using the Entity-Relationship approach. It was implemented on a PC-Windows platform using MS Access* and MS Visual Basic®. As WWW-server a Sparc 10 workstation was used with the CERN Hypertext-Transfer-Protocol-Daemon (httpd) 3.0 pre 6 software running. For compressed storage on a hard drive, a quality factor of 60 allowed on-screen differential diagnosis and corresponded to a compression factor of 1:35 for clinical images and 1:40 for histopathological images. Hierarchical keys of clinical or histopathological criteria permitted multi-criteria searches. A script using the Common Gateway Interface (CGI) enabled remote search and image retrieval via the World-Wide-Web (W3). A dermatologic image database, featurig clinical and histopathological images was constructed which allows for multi-parameter searches and world-wide remote access.

An application of business process method to the clinical efficiency of hospital.

PubMed

Leu, Jun-Der; Huang, Yu-Tsung

2011-06-01

The concept of Total Quality Management (TQM) has come to be applied in healthcare over the last few years. The process management category in the Baldrige Health Care Criteria for Performance Excellence model is designed to evaluate the quality of medical services. However, a systematic approach for implementation support is necessary to achieve excellence in the healthcare business process. The Architecture of Integrated Information Systems (ARIS) is a business process architecture developed by IDS Scheer AG and has been applied in a variety of industrial application. It starts with a business strategy to identify the core and support processes, and encompasses the whole life-cycle range, from business process design to information system deployment, which is compatible with the concept of healthcare performance excellence criteria. In this research, we apply the basic ARIS framework to optimize the clinical processes of an emergency department in a mid-size hospital with 300 clinical beds while considering the characteristics of the healthcare organization. Implementation of the case is described, and 16 months of clinical data are then collected, which are used to study the performance and feasibility of the method. The experience gleaned in this case study can be used a reference for mid-size hospitals with similar business models.

Criteria for Using Technology To Teach the Basic Course in Communication.

ERIC Educational Resources Information Center

Eadie, William F.; Andersen, Peter A.; Armas-Matsumoto, Catherine M.; Block, Evan; Martin, Patricia Geist; Goehring, Charles; Good, Jeffrey; Hellweg, Susan A.; Knight, Laura L.; Lubic, Bryan; Spitzberg, Brian H.

This paper describes the beginnings of a project to remake the oral communication general education course--part of the vision for the course is to use technology to help students learn course content. According to the paper, currently the basic course is taught mostly in traditional format (relatively small sections with set assignments), with…

Texas Assessment of Basic Skills (TABS). Austin Independent School District. Final Report, 1985.

ERIC Educational Resources Information Center

Defino, Maria E.

This report presents the Austin (Texas) Independent School District's 1985 test results on the Texas Assessment of Basic Skills (TABS). It was administered to all third, fifth, and ninth grade students and to high school students not meeting ninth grade state-set mastery criteria, the minimum competency requirement for graduation. Results are…

Wind/Tornado Guidelines Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, D.S.; Holman, G.S.

1991-10-01

This report documents the strategy employed to develop recommended wind/tornado hazard design guidelines for a New Production Reactor (NRP) currently planned for either the Idaho National Engineering Laboratory (INEL) or the Savannah River (SR) site. The Wind/Tornado Working Group (WTWG), comprising six nationally recognized experts in structural engineering, wind engineering, and meteorology, formulated an independent set of guidelines based on site-specific wind/tornado hazard curves and state-of-the-art tornado missile technology. The basic philosophy was to select realistic wind and missile load specifications, and to meet performance goals by applying conservative structural response evaluation and acceptance criteria. Simplified probabilistic risk analyses (PRAs)more » for wind speeds and missile impact were performed to estimate annual damage risk frequencies for both the INEL and SR sites. These PRAs indicate that the guidelines will lead to facilities that meet the US Department of Energy (DOE) design requirements and that the Nuclear Regulatory Commission guidelines adopted by the DOE for design are adequate to meet the NPR safety goals.« less

Design criteria for panic bars and auger miner safety. Panic bar study. Volume 1. Continuous miners. Open file report (final), 1973-74

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marrus, L.D.; Rogne, C.

1974-01-23

The panic bars (and associated linkages and electrical circuitry) that are defined in this document are a machine operator-actuated control for the emergency deenergization of the tram motors on self-propelled, electric and diesel face equipment, including haulage equipment such as shuttle cars. There are nine basic types of panic bars (and several variations) that are recommended in this document, but all of the panic bars are characteristically of the ''fire door'' type that is frequently encountered on outside exit doors of many public and some commercial buildings. It is also the intent of the following panic bar designs that, whenmore » emergency brakes are added to the face equipment machinery for which they are required, that they be designed and hooked up so that actuation of the panic bar will result in automatic application of the emergency brakes (immediately following the deenergization of the tram motors). (GRA)« less

Lubricant Selection Manual, Phase 3

NASA Technical Reports Server (NTRS)

Kannel, J. W.; Lowry, J. A.; Dufrane, K. F.

1991-01-01

Future spacecraft must be designated to operate for very long time periods in space. For example, a target goal for the Space Station is 30 years of operation. Although the actual life may be significantly less than this optimistic goal, the life will certainly be a critical issue in design. The bearings on primary components such as the alpha and beta joints must obviously be designed and lubricated with the objective of optimum performance life. In addition to these joints, there will be numerous other tribological (rubbing or rolling) interfaced that will be required to function for the life of the spacecraft. A major key to adequate performance of tribological interface is proper lubrication. Lubricants can be divided into two basic classes: solid films and liquids. Both types have been used extensively in space applications. Both have advantages and disadvantages that must be carefully considered in their selection. The purpose here is to summarize selection criteria for liquid and solid lubricants applied to long-life spacecraft.

[External quality assurance in inpatient medical rehabilitation and prevention centers for mothers, fathers and children: development of instruments for assessing structural quality].

PubMed

Saupe-Heide, M; Gerlich, C; Lukasczik, M; Musekamp, G; Neuderth, S; Vogel, H

2013-12-01

As required by German law, inpatient institutions offering prevention and rehabilitation measures for mothers, fathers and children are obliged to implement external quality assurance measures. In 2 pilot projects funded by the German federal association of health insurance funds, external quality assurance procedures for in-hospital prevention and rehabilitation of mothers and fathers were analyzed with the aim of developing a set of instruments for the description of structural characteristics in this area of health care and to evaluate its appropriateness. Concerning structure-related quality, the project included a) designing and evaluating a questionnaire, b) the definition of assessment criteria for subsequent comparative data analyses, and c) the description and documentation of the current state in the field of rehabilitation and prevention for mothers, fathers and children. To document structural quality comprehensively, a modular questionnaire was developed and tested in a survey of 115 inpatient prevention and rehabilitation institutions for mothers, fathers and children. Involving an expert panel, preliminary basic and selection criteria were defined in order to assure a conducive assessment with regard to structural attributes. The majority of institutions had provider agreements for both prevention and rehabilitation. Measures for mothers/fathers with children were predominant; only 7 institutions exclusively treated mothers and fathers. Institution sizes varied strongly. Major indications included psychosomatics, dermatology, and pneumology. Overall, structural conditions of the institutions showed a high standard. Potential for development was found with regard to some aspects of the conceptual framework of institutional practice and the implementation of the International Classification of Functioning, Disability and Health (ICF) in diagnostics. In this article, the degrees of fulfillment with relation to the structural dimensions are presented, referring to the analysis of the preliminary basic criteria. The developed modular questionnaire tapping structural features of inpatient mother/father-child institutions has proven to be a useful instrument to describe the structural quality in future routine practice of quality assurance. In addition, the data can be used for the definition of the final set of criteria. © Georg Thieme Verlag KG Stuttgart · New York.

Design e-learning with flipped learning model to improve layout understanding the concepts basic of the loop control structure

NASA Astrophysics Data System (ADS)

Handayani, D. P.; Sutarno, H.; Wihardi, Y.

2018-05-01

This study aimed in design and build e-learning with classroom flipped model to improve the concept of understanding of SMK students on the basic programming subject. Research and development obtained research data from survey questionnaire given to students of SMK class X RPL in SMK Negeri 2 Bandung and interviews to RPL productive teacher. Data also obtained from questionnaire of expert validation and students' assessment from e-learning with flipped classroom models. Data also obtained from multiple-choice test to measure improvements in conceptual understanding. The results of this research are: 1) Developed e- learning with flipped classroom model considered good and worthy of use by the average value of the percentage of 86,3% by media experts, and 85,5% by subjects matter experts, then students gave judgment is very good on e-learning either flipped classroom model with a percentage of 79,15% votes. 2) e-learning with classroom flipped models show an increase in the average value of pre-test before using e-learning 26.67 compared to the average value post-test after using e- learning at 63.37 and strengthened by the calculation of the index gains seen Increased understanding of students 'concepts by 50% with moderate criteria indicating that students' understanding is improving.

Integrated optical circuits for numerical computation

NASA Technical Reports Server (NTRS)

Verber, C. M.; Kenan, R. P.

1983-01-01

The development of integrated optical circuits (IOC) for numerical-computation applications is reviewed, with a focus on the use of systolic architectures. The basic architecture criteria for optical processors are shown to be the same as those proposed by Kung (1982) for VLSI design, and the advantages of IOCs over bulk techniques are indicated. The operation and fabrication of electrooptic grating structures are outlined, and the application of IOCs of this type to an existing 32-bit, 32-Mbit/sec digital correlator, a proposed matrix multiplier, and a proposed pipeline processor for polynomial evaluation is discussed. The problems arising from the inherent nonlinearity of electrooptic gratings are considered. Diagrams and drawings of the application concepts are provided.

The Vanderbilt Professional Nursing Practice Program: part 1: Growing and supporting professional nursing practice.

PubMed

Robinson, Karen; Eck, Carol; Keck, Becky; Wells, Nancy

2003-09-01

Professional practice programs are designed to attract, retain, and reward nurses. This three-part series will describe Vanderbilt's performance-based career advancement system, the Vanderbilt Professional Nursing Practice Program (VPNPP). Part 1 outlines the overall program's foundation, philosophical background, and basic structure. The VPNPP is built upon Benner's work, distinguishing among four levels of practice: novice, competent, proficient, and expert. Work by many in the organization identified the expected behaviors for nurses at each level, which were then used to develop clear process evaluation criteria. Part 2 will examine the performance measurement and evaluation system created to support the program. The process of advancing within the program will be described in part 3.

40 CFR 64.3 - Monitoring design criteria.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 16 2014-07-01 2014-07-01 false Monitoring design criteria. 64.3 Section 64.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) COMPLIANCE ASSURANCE MONITORING § 64.3 Monitoring design criteria. (a) General criteria. To provide a...

40 CFR 64.3 - Monitoring design criteria.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 16 2012-07-01 2012-07-01 false Monitoring design criteria. 64.3 Section 64.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) COMPLIANCE ASSURANCE MONITORING § 64.3 Monitoring design criteria. (a) General criteria. To provide a...

A telescopic jib for continuous adjustment

NASA Technical Reports Server (NTRS)

Etzler, C. C.

1979-01-01

For special space applications, e.g. for experiments distant from any orbital platforms or manipulators a new kind of jibs with extreme extension capacity has to be designed. Considering the requirements, the telescopic principle is found to be the most promising. For the choice of the stiff structure, design criteria are evaluated. Special effort deals with the drive system. An electromechanical system can satisfy the requirements. First results of the development of such a drive are presented. The most significant features are: A telescopic assembly of tubes which can be mutually moved by a short spindle in the center of the package. An elastically suspended screw is located at the bottom of each tube. For the jib extension, these screws will be linked with the spindle. The control of their sequence and the adjustment of tubes in mutual end positions are performed by latches. A functional model proved the basic idea.

We can't explore space without it - Common human space needs for exploration spaceflight

NASA Technical Reports Server (NTRS)

Daues, K. R.; Erwin, H. O.

1992-01-01

An overview is conducted of physiological, psychological, and human-interface requirements for manned spaceflight programs to establish common criteria. Attention is given to the comfort levels relevant to human support in exploration mission spacecraft and planetary habitats, and three comfort levels (CLs) are established. The levels include: (1) CL-1 for basic crew life support; (2) CL-2 for enabling the nominal completion of mission science; and (3) CL-3 which provides for enhanced life support and user-friendly interface systems. CL-2 support systems can include systems for EVA, workstations, and activity centers for repairs and enhanced utilization of payload and human/machine integration. CL-3 supports can be useful for maintaining crew psychological and physiological health as well as the design of comfortable and earthlike surroundings. While all missions require CL-1 commonality, CL-2 commonality is required only for EVA systems, display nomenclature, and restraint designs.

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Additional design criteria for the underground facility. 60.133 Section 60.133 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

Incorporating Alternative Care Site Characteristics Into Estimates of Substitutable ED Visits.

PubMed

Trueger, Nathan Seth; Chua, Kao-Ping; Hussain, Aamir; Liferidge, Aisha T; Pitts, Stephen R; Pines, Jesse M

2017-07-01

Several recent efforts to improve health care value have focused on reducing emergency department (ED) visits that potentially could be treated in alternative care sites (ie, primary care offices, retail clinics, and urgent care centers). Estimates of the number of these visits may depend on assumptions regarding the operating hours and functional capabilities of alternative care sites. However, methods to account for the variability in these characteristics have not been developed. To develop methods to incorporate the variability in alternative care site characteristics into estimates of ED visit "substitutability." Our approach uses the range of hours and capabilities among alternative care sites to estimate lower and upper bounds of ED visit substitutability. We constructed "basic" and "extended" criteria that captured the plausible degree of variation in each site's hours and capabilities. To illustrate our approach, we analyzed data from 22,697 ED visits by adults in the 2011 National Hospital Ambulatory Medical Care Survey, defining a visit as substitutable if it was treat-and-release and met both the operating hours and functional capabilities criteria. Use of the combined basic hours/basic capabilities criteria and extended hours/extended capabilities generated lower and upper bounds of estimates. Our criteria classified 5.5%-27.1%, 7.6%-20.4%, and 10.6%-46.0% of visits as substitutable in primary care offices, retail clinics, and urgent care centers, respectively. Alternative care sites vary widely in operating hours and functional capabilities. Methods such as ours may help incorporate this variability into estimates of ED visit substitutability.

Can basic life support personnel safely determine that advanced life support is not needed?

PubMed

Cone, D C; Wydro, G C

2001-01-01

To determine whether firefighter/emergency medical technicians-basic (FF/EMT-Bs) staffing basic life support (BLS) ambulances in a two-tiered emergency medical services (EMS) system can safely determine when advanced life support (ALS) is not needed. This was a prospective, observational study conducted in two academic emergency departments (EDs) receiving patients from a large urban fire-based EMS system. Runs were studied to which ALS and BLS ambulances were simultaneously dispatched, with the patient transported by the BLS unit. Prospectively established criteria for potential need for ALS were used to determine whether the FF/EMT-B's decision to cancel the ALS unit was safe, and simple outcomes (admission rate, length of stay, mortality) were examined. In the system studied, BLS crews may cancel responding ALS units at their discretion; there are no protocols or medical criteria for cancellation. A convenience sample of 69 cases was collected. In 52 cases (75%), the BLS providers indicated that they cancelled the responding ALS unit because they did not feel ALS was needed. Of these, 40 (77%) met study criteria for ALS: 39 had potentially serious chief complaints, nine had abnormal vital signs, and ten had physical exam findings that warranted ALS. Forty-five (87%) received an intervention immediately upon ED arrival that could have been provided in the field by an ALS unit, and 16 (31%) were admitted, with a median length of stay of 3.3 days (range 1.1-73.4 days). One patient died. Firefighter/EMT-Bs, working without protocols or medical criteria, cannot always safely determine which patients may require ALS intervention.

Lessons in Effective Practical Chemistry at Tertiary Level: Case Studies from a Chemistry Outreach Program

ERIC Educational Resources Information Center

Shallcross, D. E.; Harrison, T. G.; Shaw, A. J.; Shallcross, K. L.; Croker, S. J.; Norman, N. C.

2013-01-01

Two summer schools focused on practical chemistry, one involving secondary school students and one involving visually impaired adults (i.e., not involving undergraduates) have produced students that appeared to be on the way to achieving the basic criteria set out by Buckley and Kempa (1971) in terms of practical skills. These criteria being that…

The Error Prone Model and the Basic Grants Validation Selection System. Draft Final Report.

ERIC Educational Resources Information Center

System Development Corp., Falls Church, VA.

An evaluation of existing and proposed mechanisms to ensure data accuracy for the Pell Grant program is reported, and recommendations for efficient detection of fraud and error in the program are offered. One study objective was to examine the existing system of pre-established criteria (PEC), which are validation criteria that select students on…

Soft x-ray streak camera for laser fusion applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stradling, G.L.

This thesis reviews the development and significance of the soft x-ray streak camera (SXRSC) in the context of inertial confinement fusion energy development. A brief introduction of laser fusion and laser fusion diagnostics is presented. The need for a soft x-ray streak camera as a laser fusion diagnostic is shown. Basic x-ray streak camera characteristics, design, and operation are reviewed. The SXRSC design criteria, the requirement for a subkilovolt x-ray transmitting window, and the resulting camera design are explained. Theory and design of reflector-filter pair combinations for three subkilovolt channels centered at 220 eV, 460 eV, and 620 eV aremore » also presented. Calibration experiments are explained and data showing a dynamic range of 1000 and a sweep speed of 134 psec/mm are presented. Sensitivity modifications to the soft x-ray streak camera for a high-power target shot are described. A preliminary investigation, using a stepped cathode, of the thickness dependence of the gold photocathode response is discussed. Data from a typical Argus laser gold-disk target experiment are shown.« less

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2010 CFR

2010-01-01

... geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository Operations Area § 60.132 Additional design criteria for surface facilities in...

40 CFR 64.3 - Monitoring design criteria.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Monitoring design criteria. 64.3 Section 64.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) COMPLIANCE ASSURANCE MONITORING § 64.3 Monitoring design criteria. (a) General criteria. To provide a reasonable assurance of compliance with...

Recommended Standards for Teacher Education. The Accreditation of Basic and Advanced Preparation Programs for Professional School Personnel.

ERIC Educational Resources Information Center

American Association of Colleges for Teacher Education, Washington, DC.

These recommended standards for teacher education are the result of a 3-year study conducted by the Evaluative Criteria Study Committee of AACTE in response to its mandate from the National Council on Accreditation of Teacher Education (NCATE). The recommendations are presented in two major sections, one concerned with standards for basic teacher…

Recommended Standards for Teacher Education. The Accreditation of Basic and Advanced Preparation Programs for Professional School Personnel.

ERIC Educational Resources Information Center

American Association of Colleges for Teacher Education, Washington, DC.

The recommended standards for teacher education presented in this booklet are the result of a 3-year study conducted by the Evaluative Criteria Study Committee of AACTE. The recommendations are presented in two major sections, one concerned with standards for basic teacher education programs (programs for the initial preparation of teachers…

IMPLEMENTATION OF THE SEISMIC DESIGN CRITERIA OF DOE-STD-1189-2008 APPENDIX A [FULL PAPER

DOE Office of Scientific and Technical Information (OSTI.GOV)

OMBERG SK

2008-05-14

This paper describes the approach taken by two Fluor Hanford projects for implementing of the seismic design criteria from DOE-STD-1189-2008, Appendix A. The existing seismic design criteria and the new seismic design criteria is described, and an assessment of the primary differences provided. The gaps within the new system of seismic design criteria, which necessitate conduct of portions of work to the existing technical standards pending availability of applicable industry standards, is discussed. Two Hanford Site projects currently in the Control Decision (CD)-1 phase of design have developed an approach to implementation of the new criteria. Calculations have been performedmore » to determine the seismic design category for one project, based on information available in early CD-1. The potential effects of DOE-STD-1189-2008, Appendix A seismic design criteria on the process of project alternatives analysis is discussed. Present of this work is expected to benefit others in the DOE Complex that may be implementing DOE-STD-1189-2008.« less

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2011 CFR

2011-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... must my description of well drilling design criteria address? Your description of well drilling design... drilling and the completion phases, including the anticipated surface pressure used for designing the...

46 CFR 154.471 - Design criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design criteria. 154.471 Section 154.471 Shipping COAST... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Support System § 154.471 Design criteria. (a) The cargo tank support system must be designed: (1) For the loads in...

Basic nursing care to prevent nonventilator hospital-acquired pneumonia.

PubMed

Quinn, Barbara; Baker, Dian L; Cohen, Shannon; Stewart, Jennifer L; Lima, Christine A; Parise, Carol

2014-01-01

Nonventilator hospital-acquired pneumonia (NV-HAP) is an underreported and unstudied disease, with potential for measurable outcomes, fiscal savings, and improvement in quality of life. The purpose of our study was to (a) identify the incidence of NV-HAP in a convenience sample of U.S. hospitals and (b) determine the effectiveness of reliably delivered basic oral nursing care in reducing NV-HAP. A descriptive, quasi-experimental study using retrospective comparative outcomes to determine (a) the incidence of NV-HAP and (b) the effectiveness of enhanced basic oral nursing care versus usual care to prevent NV-HAP after introduction of a basic oral nursing care initiative. We used the International Statistical Classification of Diseases and Related Problems (ICD-9) codes for pneumonia not present on admission and verified NV-HAP diagnosis using the U.S. Centers for Disease Control and Prevention diagnostic criteria. We completed an evidence-based gap analysis and designed a site-specific oral care initiative designed to reduce NV-HAP. The intervention process was guided by the Influencer Model (see Figure) and participatory action research. We found a substantial amount of unreported NV-HAP. After we initiated our oral care protocols, the rate of NV-HAP per 100 patient days decreased from 0.49 to 0.3 (38.8%). The overall number of cases of NV-HAP was reduced by 37% during the 12-month intervention period. The avoidance of NV-HAP cases resulted in an estimated 8 lives saved, $1.72 million cost avoided, and 500 extra hospital days averted. The extra cost for therapeutic oral care equipment was $117,600 during the 12-month intervention period. Cost savings resulting from avoided NV-HAP was $1.72 million. Return on investment for the organization was $1.6 million in avoided costs. NV-HAP should be elevated to the same level of concern, attention, and effort as prevention of ventilator-associated pneumonia in hospitals. Nursing needs to lead the way in the design and implementation of policies that allow for adequate time, proper oral care supplies, ease of access to supplies, clear procedures, and outcome monitoring ensuring that patients are protected from NV-HAP. © 2013 Sigma Theta Tau International.

NASA balloon design and flight - Philosophy and criteria

NASA Technical Reports Server (NTRS)

Smith, I. S., Jr.

1993-01-01

The NASA philosophy and criteria for the design and flight of scientific balloons are set forth and discussed. The thickness of balloon films is standardized at 20.3 microns to isolate potential film problems, and design equations are given for specific balloon parameters. Expressions are given for: flight-stress index, total required thickness, cap length, load-tape rating, and venting-duct area. The balloon design criteria were used in the design of scientific balloons under NASA auspices since 1986, and the resulting designs are shown to be 95 percent effective. These results represent a significant increase in the effectiveness of the balloons and therefore indicate that the design criteria are valuable. The criteria are applicable to four balloon volume classes in combination with seven payload ranges.

Design criteria monograph on turbopump inducers

NASA Technical Reports Server (NTRS)

1972-01-01

State of the art and design criteria for liquid rocket engine turbopump inducers are summarized for optimal fabrication. Design criteria optimize hydrodynamic parameters to obtain highest suction specific speed without violating structural and mechanical constraints.

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2011 CFR

2011-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2013 CFR

2013-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2014 CFR

2014-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

10 CFR 60.135 - Criteria for the waste package and its components.

Code of Federal Regulations, 2012 CFR

2012-01-01

... IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Waste Package § 60.135 Criteria for the waste package and its components. (a) High-level-waste package design in general. (1) Packages for HLW shall be designed so that the in situ chemical, physical, and nuclear properties of the waste...

78 FR 33863 - Relationship Between General Design Criteria and Technical Specification Operability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0179] Relationship Between General Design Criteria and...) 2013-05, ``NRC Position on the Relationship Between General Design Criteria and Technical Specification Operability.'' This RIS clarifies the NRC staff's position on the relationship between the general design...

38 CFR 3.352 - Criteria for determining need for aid and attendance and “permanently bedridden.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... connection with his or her condition as a whole. It is only necessary that the evidence establish that the.... Determinations that the veteran is so helpless, as to be in need of regular aid and attendance will not be based.... They must be based on the actual requirement of personal assistance from others. (b) Basic criteria for...

38 CFR 3.352 - Criteria for determining need for aid and attendance and “permanently bedridden.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... connection with his or her condition as a whole. It is only necessary that the evidence establish that the.... Determinations that the veteran is so helpless, as to be in need of regular aid and attendance will not be based.... They must be based on the actual requirement of personal assistance from others. (b) Basic criteria for...

38 CFR 3.352 - Criteria for determining need for aid and attendance and “permanently bedridden.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... connection with his or her condition as a whole. It is only necessary that the evidence establish that the.... Determinations that the veteran is so helpless, as to be in need of regular aid and attendance will not be based.... They must be based on the actual requirement of personal assistance from others. (b) Basic criteria for...

High Voltage Testing. Volume 2. Specifications and Test Procedures

DTIC Science & Technology

1982-08-01

the greatest impact on the initial assumption and criteria developed in the published criteria documents include: dielectric withstanding voltage...3382-75 Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques. ASTM-D 3426 - Dielectric... Energy (NEMA Publication No. WC 7-1971). NEMA Publication No. 109 - AIEE-EEI-NEMA Standard Basic Insulation Level. 092-57 - Method of Test for Flash and

Updating of Safety Criteria for Basic Diagnostic Indicators of Dam at the Sayano-Shushenskaya HPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, L. A.; Skvortsova, A. E.

2013-09-15

Values of diagnostic indicators [K]-limitations placed on radial displacements and turn angles of horizontal sections of the dam - which are permitted for each upper-pool level within the range from 520 to 539 m are determined and proposed for inclusion in the Declaration of Safety. Empirical relationships used to develop safety criteria K1 and K2 are modified.

46 CFR 154.466 - Design criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Design criteria. 154.466 Section 154.466 Shipping COAST... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Insulation § 154.466 Design criteria. (a) The insulation for a cargo tank without a secondary barrier must be...

46 CFR 154.466 - Design criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design criteria. 154.466 Section 154.466 Shipping COAST... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Insulation § 154.466 Design criteria. (a) The insulation for a cargo tank without a secondary barrier must be...

Comparative economic and environmental assessment of four beech wood based biorefinery concepts.

PubMed

Budzinski, Maik; Nitzsche, Roy

2016-09-01

The aim of this study was to analyze four conceptual beech wood based biorefineries generated during process design in terms of environmental and economic criteria. Biorefinery 1 annually converts 400,000 dry metric tons of beech wood into the primary products 41,600t/yr polymer-grade ethylene and 58,520tDM/yr organosolv lignin and the fuels 90,800tDM/yr hydrolysis lignin and 38,400t/yr biomethane. Biorefinery 2 is extended by the product of 58,400t/yr liquid "food-grade" carbon dioxide. Biorefinery 3 produces 69,600t/yr anhydrous ethanol instead of ethylene. Compared to biorefinery 3, biorefinery 4 additionally provides carbon dioxide as product. Biorefinery 3 and 4 seem most promising, since under basic assumptions both criteria, (i) economic effectiveness and (ii) reduction of potential environmental impacts, can be fulfilled. All four alternatives may reduce potential environmental impacts compared to reference systems using the ReCiPe methodology. Economic feasibilities of the analyzed biorefineries are highly sensitive. Copyright © 2016 Elsevier Ltd. All rights reserved.

77 FR 20550 - Uniform Criteria for State Observational Surveys of Seat Belt Use

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... in calendar year 2012 to use a survey design that was approved under the old uniform criteria or, at their election, use a survey design approved under the revised uniform criteria. In calendar year 2013, all States must use a survey design approved under the revised uniform criteria. DATES: This final...

Basic-Education Mexican Teachers' Knowledge of Biotechnology and Attitudes about the Consumption of Genetically Modified Foods

ERIC Educational Resources Information Center

Jiménez-Salas, Zacarías; Campos-Góngora, Eduardo; González-Martínez, Blanca E.; Tijerina-Sáenz, Alexandra; Escamilla-Méndez, Angélica D.; Ramírez-López, Erik

2017-01-01

Over the past few years, a new research field has emerged, focusing on the social-scientific criteria for the study of opinions toward genetically modified foods (GMFs), since these may be limiting factors for the success or failure of these products. Basic education is the first step in the Mexican education system, and teachers may wield an…

Optimizing Experimental Design for Comparing Models of Brain Function

PubMed Central

Daunizeau, Jean; Preuschoff, Kerstin; Friston, Karl; Stephan, Klaas

2011-01-01

This article presents the first attempt to formalize the optimization of experimental design with the aim of comparing models of brain function based on neuroimaging data. We demonstrate our approach in the context of Dynamic Causal Modelling (DCM), which relates experimental manipulations to observed network dynamics (via hidden neuronal states) and provides an inference framework for selecting among candidate models. Here, we show how to optimize the sensitivity of model selection by choosing among experimental designs according to their respective model selection accuracy. Using Bayesian decision theory, we (i) derive the Laplace-Chernoff risk for model selection, (ii) disclose its relationship with classical design optimality criteria and (iii) assess its sensitivity to basic modelling assumptions. We then evaluate the approach when identifying brain networks using DCM. Monte-Carlo simulations and empirical analyses of fMRI data from a simple bimanual motor task in humans serve to demonstrate the relationship between network identification and the optimal experimental design. For example, we show that deciding whether there is a feedback connection requires shorter epoch durations, relative to asking whether there is experimentally induced change in a connection that is known to be present. Finally, we discuss limitations and potential extensions of this work. PMID:22125485

46 CFR 154.460 - Design criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Design criteria. 154.460 Section 154.460 Shipping COAST... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Secondary Barrier § 154.460 Design criteria. At static angles of heel up through 30°, a secondary barrier must (a...

76 FR 82323 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0296] Design, Inspection, and Testing Criteria for Air... for public comment draft regulatory guide (DG), DG-1274, ``Design, Inspection, and Testing Criteria... Systems in Light-Water-Cooled Nuclear Power Plants.'' This guide applies to the design, inspection, and...

46 CFR 154.471 - Design criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Design criteria. 154.471 Section 154.471 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Support System § 154.471 Design criteria. (a) The cargo...

46 CFR 154.466 - Design criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Design criteria. 154.466 Section 154.466 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Insulation § 154.466 Design criteria. (a) The insulation...

46 CFR 154.471 - Design criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Design criteria. 154.471 Section 154.471 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Support System § 154.471 Design criteria. (a) The cargo...

46 CFR 154.460 - Design criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Design criteria. 154.460 Section 154.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Secondary Barrier § 154.460 Design criteria. At static...

46 CFR 154.466 - Design criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design criteria. 154.466 Section 154.466 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Insulation § 154.466 Design criteria. (a) The insulation...

46 CFR 154.471 - Design criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design criteria. 154.471 Section 154.471 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Support System § 154.471 Design criteria. (a) The cargo...

46 CFR 154.466 - Design criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Design criteria. 154.466 Section 154.466 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Insulation § 154.466 Design criteria. (a) The insulation...

46 CFR 154.460 - Design criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Design criteria. 154.460 Section 154.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Secondary Barrier § 154.460 Design criteria. At static...

46 CFR 154.460 - Design criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Design criteria. 154.460 Section 154.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Secondary Barrier § 154.460 Design criteria. At static...

Fundamentals in Biostatistics for Investigation in Pediatric Dentistry: Part II -Biostatistical Methods.

PubMed

Pozos-Guillén, Amaury; Ruiz-Rodríguez, Socorro; Garrocho-Rangel, Arturo

The main purpose of the second part of this series was to provide the reader with some basic aspects of the most common biostatistical methods employed in health sciences, in order to better understand the validity, significance and reliability of the results from any article on Pediatric Dentistry. Currently, as mentioned in the first paper, Pediatric Dentists need basic biostatistical knowledge to be able to apply it when critically appraise a dental article during the Evidence-based Dentistry (EBD) process, or when participating in the development of a clinical study with dental pediatric patients. The EBD process provides a systematic approach of collecting, review and analyze current and relevant published evidence about oral health care in order to answer a particular clinical question; then this evidence should be applied in everyday practice. This second report describes the most commonly used statistical methods for analyzing and interpret collected data, and the methodological criteria to be considered when choosing the most appropriate tests for a specific study. These are available to Pediatric Dentistry practicants interested in reading or designing original clinical or epidemiological studies.

System engineering study of electrodynamic tether as a spaceborne generator and radiator of electromagnetic waves in the ULF/ELF frequency band

NASA Technical Reports Server (NTRS)

Estes, Robert D.

1987-01-01

An electrodynamic tether deployed from a satellite in low-Earth orbit can perform, if properly instrumented, as a partially self-powered generator of electromagnetic waves in the ULF/ELF band, potentially at power levels high enough to be of practical use. Two basic problems are examined. The first is that of the level of wave power that the system can be expected to generate in the ULF/ELF radiation band. The second major question is whether an electrodynamic tethered satellite system for transmitting waves can be made partially self-powering so that power requirements for drag compensation can be met within economical constraints of mass, cost, and complexity. The theoretical developments and the system applications study are presented. The basic design criteria, the drag-compensation method, the effects on the propagation paths from orbit to Earth surface of high-altitude nuclear debris patches, and the estimate of masses and sizes are covered. An outline of recommended analytical work, to be performed as a follow-on to the present study, is contained.

Life and Utilization Criteria Identification in Design (LUCID). Volume II

DTIC Science & Technology

1981-10-01

AFWAL-.TR.412101 VOLUME Iff LIFE AND UTILIZATION CRITERIA IDENTIFICATION oIN DESIGN , VOLUME I[ SMcDonnell Aircraft Company SMcDonnell Douglas... design , a complexinteractive air- craft/engine design effort is conducted. The primary objective of the Life and Utilization Criteria Identification in... Design (LUCID) Program was to develop and demonstrate techniques which will aid in identifying, during conceptual design , balanced and consistent

POROUS PAVEMENT. PHASE I. DESIGN AND OPERATIONAL CRITERIA

EPA Science Inventory

Design and operational criteria, utilization concepts, benefits and disadvantages, as well as other characteristics of porous pavements are presented in this report. Particular emphasis is placed on porous asphalt pavements, but the criteria and design approach are applicable to ...

Molecular Contrast Optical Coherence Tomography: A Review¶

PubMed Central

Yang, Changhuei

2005-01-01

This article reviews the current state of research on the use of molecular contrast agents in optical coherence tomography (OCT) imaging techniques. After a brief discussion of the basic principle of OCT and the importance of incorporating molecular contrast agent usage into this imaging modality, we shall present an overview of the different molecular contrast OCT (MCOCT) methods that have been developed thus far. We will then discuss several important practical issues that define the possible range of contrast agent choice, the design criteria for engineered molecular contrast agent and the implementability of a given MCOCT method for clinical or biological applications. We will conclude by outlining a few areas of pursuit that deserve a greater degree of research and development. PMID:15588122

Securing quality of camera-based biomedical optics

NASA Astrophysics Data System (ADS)

Guse, Frank; Kasper, Axel; Zinter, Bob

2009-02-01

As sophisticated optical imaging technologies move into clinical applications, manufacturers need to guarantee their products meet required performance criteria over long lifetimes and in very different environmental conditions. A consistent quality management marks critical components features derived from end-users requirements in a top-down approach. Careful risk analysis in the design phase defines the sample sizes for production tests, whereas first article inspection assures the reliability of the production processes. We demonstrate the application of these basic quality principles to camera-based biomedical optics for a variety of examples including molecular diagnostics, dental imaging, ophthalmology and digital radiography, covering a wide range of CCD/CMOS chip sizes and resolutions. Novel concepts in fluorescence detection and structured illumination are also highlighted.

Power system interface and umbilical system study

NASA Technical Reports Server (NTRS)

1980-01-01

System requirements and basic design criteria were defined for berthing or docking a payload to the 25 kW power module which will provide electrical power and attitude control, cooling, data transfer, and communication services to free-flying and Orbiter sortie payloads. The selected umbilical system concept consists of four assemblies and command and display equipment to be installed at the Orbiter payload specialist station: (1) a movable platen assembly which is attached to the power system with EVA operable devices; (2) a slave platen assembly which is attached to the payload with EVA operable devices; (3) a fixed secondary platen permanently installed in the power system; and (4) a fixed secondary platen permanently installed on the payload. Operating modes and sequences are described.

The chronic mental patient: the position of th Canadian Psychiatric Association.

PubMed

Watt, J A; el-Guebaly, N

1981-11-01

The Canadian Psychiatric Association recommends: 1. In this International Year of Disabled Persons, that the needs of the chronic neural patient be publicized with emphasis on the potential for improvement if these needs are adequately met. A working definition of the chronic mental patient refers to those members of society who suffer from a chronic mental illness and who demonstrate significant impairment of task performance and/or social performance. 2. A comprehensive network of services should be developed including provision for basic need with a range of housing options, inpatient and outpatient psychiatric evaluations and treatment, personal clinical support, living-skills training and vocational assessment and training. Aside from patient needs, the professional status of the caregivers involved is to be enhanced. Laudable efforts by self-help groups should be further encouraged. 3. Community resources should be enlisted following principles and practices identified as basic to successful programs already existing, for example: -- provision of economic stability -- presence of administrative leadership -- striving for continuity of care -- allowance for adequate manpower -- establishment of vocational supports -- respect for patients' rights -- provision of community education -- design of ongoing evaluation and research 4. A greater emphasis should be placed in undergraduate and postgraduate medical and psychiatric training programs on the treatment of the chronically ill. 5. The Canadian Council on Hospital Accreditation should continue to elaborate and publish criteria by which services to the chronically mentally ill would be evaluated both at the inpatient and outpatient levels. These criteria when available should be promoted in all relevant institutions.

A Pilot Study on Modeling of Diagnostic Criteria Using OWL and SWRL.

PubMed

Hong, Na; Jiang, Guoqian; Pathak, Jyotishiman; Chute, Christopher G

2015-01-01

The objective of this study is to describe our efforts in a pilot study on modeling diagnostic criteria using a Semantic Web-based approach. We reused the basic framework of the ICD-11 content model and refined it into an operational model in the Web Ontology Language (OWL). The refinement is based on a bottom-up analysis method, in which we analyzed data elements (including value sets) in a collection (n=20) of randomly selected diagnostic criteria. We also performed a case study to formalize rule logic in the diagnostic criteria of metabolic syndrome using the Semantic Web Rule Language (SWRL). The results demonstrated that it is feasible to use OWL and SWRL to formalize the diagnostic criteria knowledge, and to execute the rules through reasoning.

Design Criteria for Microbiological Facilities at Fort Detrick. Volume II: Design Criteria

ERIC Educational Resources Information Center

Army Biological Labs., Fort Detrick, MD. Industrial Health and Safety Div.

Volume II of a two-volume manual of design criteria, based primarily on biological safety considerations. It is prepared for the use of architect-engineers in designing new or modified microbiological facilities for Fort Detrick, Maryland. Volume II is divided into the following sections: (1) architectural, (2) heating, ventilating, and air…

36 CFR 212.55 - Criteria for designation of roads, trails, and areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... roads, trails, and areas. 212.55 Section 212.55 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE TRAVEL MANAGEMENT Designation of Roads, Trails, and Areas for Motor Vehicle Use § 212.55 Criteria for designation of roads, trails, and areas. (a) General criteria for designation of...

An analysis of hydrogen production via closed-cycle schemes. [thermochemical processings from water

NASA Technical Reports Server (NTRS)

Chao, R. E.; Cox, K. E.

1975-01-01

A thermodynamic analysis and state-of-the-art review of three basic schemes for production of hydrogen from water: electrolysis, thermal water-splitting, and multi-step thermochemical closed cycles is presented. Criteria for work-saving thermochemical closed-cycle processes are established, and several schemes are reviewed in light of such criteria. An economic analysis is also presented in the context of energy costs.

25 CFR 36.94 - What must a homeliving handbook contain?

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Discipline Policy; (c) Parent/Student Rights and Responsibilities; (d) Confidentiality; (e) Sexual Harassment... FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving...

25 CFR 36.94 - What must a homeliving handbook contain?

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Discipline Policy; (c) Parent/Student Rights and Responsibilities; (d) Confidentiality; (e) Sexual Harassment... FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving...

25 CFR 36.94 - What must a homeliving handbook contain?

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Discipline Policy; (c) Parent/Student Rights and Responsibilities; (d) Confidentiality; (e) Sexual Harassment... FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving...

25 CFR 36.94 - What must a homeliving handbook contain?

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Discipline Policy; (c) Parent/Student Rights and Responsibilities; (d) Confidentiality; (e) Sexual Harassment... FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving...

48 CFR 6.102 - Use of competitive procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... procedure (see subpart 36.6 for procedures). (2) Competitive selection of basic and applied research and... nature identifying areas of research interest, including criteria for selecting proposals, and soliciting...

25 CFR 36.75 - What qualifications must homeliving staff possess?

Code of Federal Regulations, 2013 CFR

2013-04-01

..., including fields related to working with children, such as, child development, education, behavioral... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS...

25 CFR 36.75 - What qualifications must homeliving staff possess?

Code of Federal Regulations, 2012 CFR

2012-04-01

..., including fields related to working with children, such as, child development, education, behavioral... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS...

Validation of Student and Parent Reported Data on the Basic Grant Application Form: Pre-Award Validation Analysis Study. Revised Final Report.

ERIC Educational Resources Information Center

Applied Management Sciences, Inc., Silver Spring, MD.

The 1978-1979 pre-award institution validation process for the Basic Educational Opportunity Grant (BEOG) program was studied, based on applicant and grant recipient files as of the end of February 1979. The objective was to assess the impact of the validation process on the proper award of BEOGs, and to determine whether the criteria for…

Validation of Student and Parent Report Data on the Basic Grant Application Form. Final Report. Volume I, Individual Validation Studies: Institution Referral Study, Pre-established Criteria Study.

ERIC Educational Resources Information Center

Vogel, Ronald J.

Errors made on applications to the Basic Educational Opportunity Grant (BEOG) program were studied to determine the scope and nature of misreporting and misuse of the BEOG program. Characteristics of applicants who misreport personal and/or family financial circumstances were identified, and procedures were established to regularly screen and…

Space Tethers Design Criteria

NASA Technical Reports Server (NTRS)

Tomlin, Donald D.; Faile, Gwyn C.; Hayashida, Kazuo B.; Frost, Cynthia L.; Wagner, Carole Y.; Mitchell, Michael L.; Vaughn, Jason A.; Galuska, Michael J.

1998-01-01

The small expendable deployable system and tether satellite system programs did not have a uniform written criteria for tethers. The JSC safety panel asked what criteria was used to design the tethers. Since none existed, a criteria was written based on past experience for future tether programs.

Research on Basic Design Education: An International Survey

ERIC Educational Resources Information Center

Boucharenc, C. G.

2006-01-01

This paper reports on the results of a survey and qualitative analysis on the teaching of "Basic Design" in schools of design and architecture located in 22 countries. In the context of this research work, Basic Design means the teaching and learning of design fundamentals that may also be commonly referred to as the Principles of Two- and…

Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

NASA Astrophysics Data System (ADS)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2010-04-01 2010-04-01 false Basic design requirements. 1340.3 Section 1340.3...

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2011-04-01 2011-04-01 false Basic design requirements. 1340.3 Section 1340.3...

Automation of Tooling Backup and Cutter Selection for Engineering Production

NASA Astrophysics Data System (ADS)

Terekhov, M. V.; Averchenkov, V. I.; Reutov, A. A.; Handozhko, A. V.

2017-01-01

This paper reports the analysis of a tool support procedure for mechanical engineering and basic trends in the automation of this field are revealed. The system of technical-organizational measures directed at the formation, management and development of the tool stock and a high degree of technological readiness of manufacturing are described. The problems of an automated optimum cutter selection are considered. A mathematical support for a choice of cutters with through-away tips is described. A simulator for the description of combined cutters is presented. Basic criteria defining cutter choice are established. The problem of a multi-criterion fuzzy estimation of alternatives at different significance of choice criteria is solved. The criterion significance ranking at the parameter choice of cutter plates and tool supports is carried out. A set of estimations of cutter plate forms and other cutter parameters taking into account a relative significance of criteria is defined. The application of a decisive rule in the choice of an alternative required is described, which consists in the definition of the intersection of sets of alternative estimations.

10 CFR Appendix A to Part 50 - General Design Criteria for Nuclear Power Plants

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false General Design Criteria for Nuclear Power Plants A... FACILITIES Pt. 50, App. A Appendix A to Part 50—General Design Criteria for Nuclear Power Plants Table of... Design Bases for Protection Against Natural Phenomena 2 Fire Protection 3 Environmental and Dynamic...

10 CFR Appendix A to Part 50 - General Design Criteria for Nuclear Power Plants

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false General Design Criteria for Nuclear Power Plants A... FACILITIES Pt. 50, App. A Appendix A to Part 50—General Design Criteria for Nuclear Power Plants Table of... Design Bases for Protection Against Natural Phenomena 2 Fire Protection 3 Environmental and Dynamic...

10 CFR Appendix A to Part 50 - General Design Criteria for Nuclear Power Plants

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false General Design Criteria for Nuclear Power Plants A... FACILITIES Pt. 50, App. A Appendix A to Part 50—General Design Criteria for Nuclear Power Plants Table of... Design Bases for Protection Against Natural Phenomena 2 Fire Protection 3 Environmental and Dynamic...

Design criteria for portable timber bridge systems : static versus dynamic loads

Treesearch

John M. Franklin; S. E. Taylor; Paul A. Morgan; M. A. Ritter

1999-01-01

Design criteria are needed specifically for portable bridges to insure that they are safe and cost effective. This paper discusses different portable bridge categories and their general design criteria. Specific emphasis is given to quantifying the effects of dynamic live loads on portable bridge design. Results from static and dynamic load tests of two portable timber...

POROUS PAVEMENT PHASE I DESIGN AND OPERATIONAL CRITERIA (EPA/600/2-80/135)

EPA Science Inventory

Design and operational criteria, utilization concepts, benefits and disadvantages, as well as other characteristics of porous pavements are presented in this report. Particular emphasis is placed on porous asphalt pavements, but the criteria and design approach are applicable to ...

Universally Designed Text on the Web: Towards Readability Criteria Based on Anti-Patterns.

PubMed

Eika, Evelyn

2016-01-01

The readability of web texts affects accessibility. The Web Content Accessibility guidelines (WCAG) state that the recommended reading level should match that of someone who has completed basic schooling. However, WCAG does not give advice on what constitutes an appropriate reading level. Web authors need tools to help composing WCAG compliant texts, and specific criteria are needed. Classic readability metrics are generally based on lengths of words and sentences and have been criticized for being over-simplistic. Automatic measures and classifications of texts' reading levels employing more advanced constructs remain an unresolved problem. If such measures were feasible, what should these be? This work examines three language constructs not captured by current readability indices but believed to significantly affect actual readability, namely, relative clauses, garden path sentences, and left-branching structures. The goal is to see whether quantifications of these stylistic features reflect readability and how they correspond to common readability measures. Manual assessments of a set of authentic web texts for such uses were conducted. The results reveal that texts related to narratives such as children's stories, which are given the highest readability value, do not contain these constructs. The structures in question occur more frequently in expository texts that aim at educating or disseminating information such as strategy and journal articles. The results suggest that language anti-patterns hold potential for establishing a set of deeper readability criteria.

Technical features and criteria in designing fiber-reinforced composite materials: from the aerospace and aeronautical field to biomedical applications.

PubMed

Gloria, Antonio; Ronca, Dante; Russo, Teresa; D'Amora, Ugo; Chierchia, Marianna; De Santis, Roberto; Nicolais, Luigi; Ambrosio, Luigi

2011-01-01

Polymer-based composite materials are ideal for applications where high stiffness-to-weight and strength-to-weight ratios are required. From aerospace and aeronautical field to biomedical applications, fiber-reinforced polymers have replaced metals, thus emerging as an interesting alternative. As widely reported, the mechanical behavior of the composite materials involves investigation on micro- and macro-scale, taking into consideration micromechanics, macromechanics and lamination theory. Clinical situations often require repairing connective tissues and the use of composite materials may be suitable for these applications because of the possibility to design tissue substitutes or implants with the required mechanical properties. Accordingly, this review aims at stressing the importance of fiber-reinforced composite materials to make advanced and biomimetic prostheses with tailored mechanical properties, starting from the basic principle design, technologies, and a brief overview of composites applications in several fields. Fiber-reinforced composite materials for artificial tendons, ligaments, and intervertebral discs, as well as for hip stems and mandible models will be reviewed, highlighting the possibility to mimic the mechanical properties of the soft and hard tissues that they replace.

Affect school and script analysis versus basic body awareness therapy in the treatment of psychological symptoms in patients with diabetes and high HbA1c concentrations: two study protocols for two randomized controlled trials.

PubMed

Melin, Eva O; Svensson, Ralph; Gustavsson, Sven-Åke; Winberg, Agneta; Denward-Olah, Ewa; Landin-Olsson, Mona; Thulesius, Hans O

2016-04-27

Depression is linked with alexithymia, anxiety, high HbA1c concentrations, disturbances of cortisol secretion, increased prevalence of diabetes complications and all-cause mortality. The psycho-educational method 'affect school with script analysis' and the mind-body therapy 'basic body awareness treatment' will be trialled in patients with diabetes, high HbA1c concentrations and psychological symptoms. The primary outcome measure is change in symptoms of depression. Secondary outcome measures are changes in HbA1c concentrations, midnight salivary cortisol concentration, symptoms of alexithymia, anxiety, self-image measures, use of antidepressants, incidence of diabetes complications and mortality. Two studies will be performed. Study I is an open-labeled parallel-group study with a two-arm randomized controlled trial design. Patients are randomized to either affect school with script analysis or to basic body awareness treatment. According to power calculations, 64 persons are required in each intervention arm at the last follow-up session. Patients with type 1 or type 2 diabetes were recruited from one hospital diabetes outpatient clinic in 2009. The trial will be completed in 2016. Study II is a multicentre open-labeled parallel-group three-arm randomized controlled trial. Patients will be randomized to affect school with script analysis, to basic body awareness treatment, or to treatment as usual. Power calculations show that 70 persons are required in each arm at the last follow-up session. Patients with type 2 diabetes will be recruited from primary care. This study will start in 2016 and finish in 2023. For both studies, the inclusion criteria are: HbA1c concentration ≥62.5 mmol/mol; depression, alexithymia, anxiety or a negative self-image; age 18-59 years; and diabetes duration ≥1 year. The exclusion criteria are pregnancy, severe comorbidities, cognitive deficiencies or inadequate Swedish. Depression, anxiety, alexithymia and self-image are assessed using self-report instruments. HbA1c concentration, midnight salivary cortisol concentration, blood pressure, serum lipid concentrations and anthropometrics are measured. Data are collected from computerized medical records and the Swedish national diabetes and causes of death registers. Whether the "affect school with script analysis" will reduce psychological symptoms, increase emotional awareness and improve diabetes related factors will be tried, and compared to "basic body awareness treatment" and treatment as usual. ClinicalTrials.gov: NCT01714986.

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2011 CFR

2011-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

10 CFR 60.133 - Additional design criteria for the underground facility.

Code of Federal Regulations, 2014 CFR

2014-01-01

... specific site conditions identified through in situ monitoring, testing, or excavation. (c) Retrieval of waste. The underground facility shall be designed to permit retrieval of waste in accordance with the... RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository...

14 CFR 1259.402 - Basic criteria and application procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Space Grant college if the Administrator or designee finds that it has a balanced program of research... not limited to, proposed linkages with other colleges and universities (particularly institutions with...

14 CFR 1259.402 - Basic criteria and application procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Space Grant college if the Administrator or designee finds that it has a balanced program of research... not limited to, proposed linkages with other colleges and universities (particularly institutions with...

25 CFR 36.24 - Standard IX-Secondary instructional program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum... technology, industry and business, as well as required special skills and the training requisites. Programs...

25 CFR 36.24 - Standard IX-Secondary instructional program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum... technology, industry and business, as well as required special skills and the training requisites. Programs...

25 CFR 36.24 - Standard IX-Secondary instructional program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum... technology, industry and business, as well as required special skills and the training requisites. Programs...

25 CFR 36.24 - Standard IX-Secondary instructional program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum... technology, industry and business, as well as required special skills and the training requisites. Programs...

25 CFR 36.24 - Standard IX-Secondary instructional program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum... technology, industry and business, as well as required special skills and the training requisites. Programs...

Evaluation Criteria for the Educational Web-Information System

ERIC Educational Resources Information Center

Seok, Soonhwa; Meyen, Edward; Poggio, John C.; Semon, Sarah; Tillberg-Webb, Heather

2008-01-01

This article addresses how evaluation criteria improve educational Web-information system design, and the tangible and intangible benefits of using evaluation criteria, when implemented in an educational Web-information system design. The evaluation criteria were developed by the authors through a content validation study applicable to…

Study of Army Design Hover Criteria

DTIC Science & Technology

2017-09-01

SPECIAL REPORT RDMR-AE-17-02 STUDY OF ARMY DESIGN HOVER CRITERIA Douglas V. Horacek Command Analysis Directorate Aviation...OF THE ARMY POSITION UNLESS SO DESIGNATED BY OTHER AUTHORIZED DOCUMENTS. TRADE NAMES USE OF TRADE NAMES OR MANUFACTURERS IN THIS REPORT...Study of Army Design Hover Criteria 5. FUNDING NUMBERS 6. AUTHOR(S) Douglas V. Horacek and Mark E. Calvert 7. PERFORMING ORGANIZATION

Dissociation between facial and bodily expressions in emotion recognition: A case study.

PubMed

Leiva, Samanta; Margulis, Laura; Micciulli, Andrea; Ferreres, Aldo

2017-12-21

Existing single-case studies have reported deficit in recognizing basic emotions through facial expression and unaffected performance with body expressions, but not the opposite pattern. The aim of this paper is to present a case study with impaired emotion recognition through body expressions and intact performance with facial expressions. In this single-case study we assessed a 30-year-old patient with autism spectrum disorder, without intellectual disability, and a healthy control group (n = 30) with four tasks of basic and complex emotion recognition through face and body movements, and two non-emotional control tasks. To analyze the dissociation between facial and body expressions, we used Crawford and Garthwaite's operational criteria, and we compared the patient and the control group performance with a modified one-tailed t-test designed specifically for single-case studies. There were no statistically significant differences between the patient's and the control group's performances on the non-emotional body movement task or the facial perception task. For both kinds of emotions (basic and complex) when the patient's performance was compared to the control group's, statistically significant differences were only observed for the recognition of body expressions. There were no significant differences between the patient's and the control group's correct answers for emotional facial stimuli. Our results showed a profile of impaired emotion recognition through body expressions and intact performance with facial expressions. This is the first case study that describes the existence of this kind of dissociation pattern between facial and body expressions of basic and complex emotions.

Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-01-01

The Department of Energy (DOE) has issued an Order 420.1 which establishes policy for its facilities in the event of natural phenomena hazards (NPH) along with associated NPH mitigation requirements. This DOE Standard gives design and evaluation criteria for NPH effects as guidance for implementing the NPH mitigation requirements of DOE Order 420.1 and the associated implementation Guides. These are intended to be consistent design and evaluation criteria for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of these criteria is to assure that DOE facilities can withstand the effects of natural phenomena suchmore » as earthquakes, extreme winds, tornadoes, and flooding. These criteria apply to the design of new facilities and the evaluation of existing facilities. They may also be used for modification and upgrading of existing facilities as appropriate. The design and evaluation criteria presented herein control the level of conservatism introduced in the design/evaluation process such that earthquake, wind, and flood hazards are treated on a consistent basis. These criteria also employ a graded approach to ensure that the level of conservatism and rigor in design/evaluation is appropriate for facility characteristics such as importance, hazards to people on and off site, and threat to the environment. For each natural phenomena hazard covered, these criteria consist of the following: Performance Categories and target performance goals as specified in the DOE Order 420.1 NPH Implementation Guide, and DOE-STD-1 021; specified probability levels from which natural phenomena hazard loading on structures, equipment, and systems is developed; and design and evaluation procedures to evaluate response to NPH loads and criteria to assess whether or not computed response is permissible.« less

23 CFR 652.13 - Design and construction criteria.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Design and construction criteria. 652.13 Section 652.13 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PEDESTRIAN AND BICYCLE ACCOMMODATIONS AND PROJECTS § 652.13 Design and construction criteria. (a) The American Association of State Highway and...

Analysis of a Preloaded Bolted Joint in a Ceramic Composite Combustor

NASA Technical Reports Server (NTRS)

Hissam, D. Andy; Bower, Mark V.

2003-01-01

This paper presents the detailed analysis of a preloaded bolted joint incorporating ceramic materials. The objective of this analysis is to determine the suitability of a joint design for a ceramic combustor. The analysis addresses critical factors in bolted joint design including preload, preload uncertainty, and load factor. The relationship between key joint variables is also investigated. The analysis is based on four key design criteria, each addressing an anticipated failure mode. The criteria are defined in terms of margin of safety, which must be greater than zero for the design criteria to be satisfied. Since the proposed joint has positive margins of safety, the design criteria are satisfied. Therefore, the joint design is acceptable.

Safety approach to the selection of design criteria for the CRBRP reactor refueling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meisl, C J; Berg, G E; Sharkey, N F

1979-01-01

The selection of safety design criteria for Liquid Metal Fast Breeder Reactor (LMFBR) refueling systems required the extrapolation of regulations and guidelines intended for Light Water Reactor refueling systems and was encumbered by the lack of benefit from a commercially licensed predecessor other than Fermi. The overall approach and underlying logic are described for developing safety design criteria for the reactor refueling system (RRS) of the Clinch River Breeder Reactor Plant (CRBRP). The complete selection process used to establish the criteria is presented, from the definition of safety functions to the finalization of safety design criteria in the appropriate documents.more » The process steps are illustrated by examples.« less

Conceptual design of a Moving Belt Radiator (MBR) shuttle-attached experiment

NASA Technical Reports Server (NTRS)

Aguilar, Jerry L.

1990-01-01

The conceptual design of a shuttle-attached Moving Belt Radiator (MBR) experiment is presented. The MBR is an advanced radiator concept in which a rotating belt is used to radiate thermal energy to space. The experiment is developed with the primary focus being the verification of the dynamic characteristics of a rotating belt with a secondary objective of proving the thermal and sealing aspects in a reduced gravity, vacuum environment. The mechanical design, selection of the belt material and working fluid, a preliminary test plan, and program plan are presented. The strategy used for selecting the basic sizes and materials of the components are discussed. Shuttle and crew member requirements are presented with some options for increasing or decreasing the demands on the STS. An STS carrier and the criteria used in the selection process are presented. The proposed carrier for the Moving Belt Radiator experiment is the Hitchhiker-M. Safety issues are also listed with possible results. This experiment is designed so that a belt can be deployed, run at steady state conditions, run with dynamic perturbations imposed, verify the operation of the interface heat exchanger and seals, and finally be retracted into a stowed position for transport back to earth.

Carbon dioxide mineralization process design and evaluation: concepts, case studies, and considerations.

PubMed

Yuen, Yeo Tze; Sharratt, Paul N; Jie, Bu

2016-11-01

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.

Evolution of an interfacial crack on the concrete-embankment boundary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glascoe, Lee; Antoun, Tarabay; Kanarska, Yuliya

2013-07-10

Failure of a dam can have subtle beginnings. A small crack or dislocation at the interface of the concrete dam and the surrounding embankment soil initiated by, for example, a seismic or an explosive event can lead to a catastrophic failure of the dam. The dam may ‘self-rehabilitate’ if a properly designed granular filter is engineered around the embankment. Currently, the design criteria for such filters have only been based on experimental studies. We demonstrate the numerical prediction of filter effectiveness at the soil grain scale. This joint LLNL-ERDC basic research project, funded by the Department of Homeland Security’s Sciencemore » and Technology Directorate (DHS S&T), consists of validating advanced high performance computer simulations of soil erosion and transport of grain- and dam-scale models to detailed centrifuge and soil erosion tests. Validated computer predictions highlight that a resilient filter is consistent with the current design specifications for dam filters. These predictive simulations, unlike the design specifications, can be used to assess filter success or failure under different soil or loading conditions and can lead to meaningful estimates of the timing and nature of full-scale dam failure.« less

The APGAR rubric for scoring online discussion boards.

PubMed

Phillippi, Julia C; Schorn, Mavis N; Moore-Davis, Tonia

2015-05-01

The World Health Organization has called for a dramatic increase in the number of midwives and supports the use of innovative programs to assist students in achieving midwifery competencies. Online discussion boards are excellent educational tools for stimulating in-depth student engagement. However, complex discussions can be difficult to grade without a well-constructed rubric. The 'discussion-board APGAR' provides clear scoring criteria for discussions of midwifery care. The discussion-board APGAR has 5 components: Application, Professionalism, Group work, Analysis, and Rationale and provides scoring criteria for unacceptable, marginal, and proficient performance. The discussion-board APGAR is based on the Core Competencies for Basic Midwifery Practice in the United States (US), consistent with the International Confederation of Midwives Essential Competencies for Basic Midwifery Practice, and can be adjusted to be congruent with other midwifery standards. Copyright © 2014 Elsevier Ltd. All rights reserved.

[The forensic medical assessment of the results of a study of laryngeal injuries in blunt trauma to the neck].

PubMed

Svetlakov, A V; Korenev, S A; Akishin, A N

1997-01-01

Presents the methodological principles and succession of examination of the basic formations of the larynx in cases with blunt injuries of the neck. Describes variants of anatomic structure of the sublingual bone and laryngeal cartilages influencing the morphology of injuries thereof. Offers differential diagnostic criteria of various mechanisms of fractures of the basic formations and recommendations on medical criminological assessment of laryngeal injuries.

Validation of Student and Parent Reported Data on the Basic Grant Application Form: Institution/OE Referral Study, Pre-Established and ACT Criteria Study, Overpayment Recovery. Final Report, Volume 2.

ERIC Educational Resources Information Center

Walters, Pamela Barnhouse; And Others

The validity of information provided in applications to the Basic Educational Opportunity Grant (BEOG) program was studied, along with procedures used in recovering overpayments. The objective was to investigate misreporting and misuse of the BEOG program. A 1977-1978 study reviewed cases referred to the U.S. Office of Education by educational…

Validation of Student and Parent Report Data on the Basic Grant Application Form: Institution Referral Study, Pre-established Criteria Study, Overpayment Recovery. Final Report, Volume 2.

ERIC Educational Resources Information Center

Vogel, Ronald J.; And Others

The types and ranges of errors made on applications to the Basic Educational Opportunity Grant (BEOG) program were studied, along with procedures used in recovering overpayments. The objective was to assess the scope and nature of misreporting and misuse of the BEOG program. A 1975-1976 study reviewed cases referred to the U.S. Office of Education…

A two-dimensional biased coin design for dual-agent dose-finding trials.

PubMed

Sun, Zhichao; Braun, Thomas M

2015-12-01

Given the limited efficacy observed with single agents, there is growing interest in Phase I clinical trial designs that allow for identification of the maximum tolerated combination of two agents. Existing parametric designs may suffer from over- or under-parameterization. Thus, we have designed a nonparametric approach that can be easily understood and implemented for combination trials. We propose a two-stage adaptive biased coin design that extends existing methods for single-agent trials to dual-agent dose-finding trials. The basic idea of our design is to divide the entire trial into two stages and apply the biased coin design, with modification, in each stage. We compare the operating characteristics of our design to four competing parametric approaches via simulation in several numerical examples. Under all simulation scenarios we have examined, our method performs well in terms of identification of the maximum tolerated combination and allocation of patients relative to the performance of its competitors. In our design, stopping rule criteria and the distribution of the total sample size among the two stages are context-dependent, and both need careful consideration before adopting our design in practice. Efficacy is not a part of the dose-assignment algorithm, nor used to define the maximum tolerated combination. Our design inherits the favorable statistical properties of the biased coin design, is competitive with existing designs, and promotes patient safety by limiting patient exposure to toxic combinations whenever possible. © The Author(s) 2015.

Marshall mix design criteria.

DOT National Transportation Integrated Search

1980-01-01

This report discusses the basis of the original Marshall design criteria established by the Waterways Experiment Station and criteria used by the Asphalt Institute and Virginia Department of Highways and Transportation. Marshall test properties are d...

Pre-internship Nigerian medical graduates lack basic musculoskeletal competency.

PubMed

Nottidge, Timothy Eyo; Ekrikpo, Udeme; Ifesanya, Adeleke Olusegun; Nnabuko, Richard E; Dim, Edwin Maduakonam; Udoinyang, Clement Inyang

2012-04-01

Our aim was to assess the basic musculoskeletal competency of pre-internship graduates from Nigerian medical schools. We administered the Freedman and Bernstein basic musculoskeletal competency examination to 113 pre-internship graduates from seven Nigerian medical schools over a three year period from 2008 to 2010 at the University of Uyo Teaching Hospital. Five specialist residents took the examination to test criteria relevance. All graduates failed this test, obtaining scores ranging from 7% to 67%. The duration of the orthopaedic posting, and observation of operative fracture fixation, were not significant determinants of the score. The two final-year specialist residents each had a marginal pass in the examination. Basic musculoskeletal competency among pre-internship Nigerian medical-school graduates is inadequate.

Theory for plasticity of face-centered cubic metals.

PubMed

Jo, Minho; Koo, Yang Mo; Lee, Byeong-Joo; Johansson, Börje; Vitos, Levente; Kwon, Se Kyun

2014-05-06

The activation of plastic deformation mechanisms determines the mechanical behavior of crystalline materials. However, the complexity of plastic deformation and the lack of a unified theory of plasticity have seriously limited the exploration of the full capacity of metals. Current efforts to design high-strength structural materials in terms of stacking fault energy have not significantly reduced the laborious trial and error works on basic deformation properties. To remedy this situation, here we put forward a comprehensive and transparent theory for plastic deformation of face-centered cubic metals. This is based on a microscopic analysis that, without ambiguity, reveals the various deformation phenomena and elucidates the physical fundaments of the currently used phenomenological correlations. We identify an easily accessible single parameter derived from the intrinsic energy barriers, which fully specifies the potential diversity of metals. Based entirely on this parameter, a simple deformation mode diagram is shown to delineate a series of convenient design criteria, which clarifies a wide area of material functionality by texture control.

Theory for plasticity of face-centered cubic metals

PubMed Central

Jo, Minho; Koo, Yang Mo; Lee, Byeong-Joo; Johansson, Börje; Vitos, Levente; Kwon, Se Kyun

2014-01-01

The activation of plastic deformation mechanisms determines the mechanical behavior of crystalline materials. However, the complexity of plastic deformation and the lack of a unified theory of plasticity have seriously limited the exploration of the full capacity of metals. Current efforts to design high-strength structural materials in terms of stacking fault energy have not significantly reduced the laborious trial and error works on basic deformation properties. To remedy this situation, here we put forward a comprehensive and transparent theory for plastic deformation of face-centered cubic metals. This is based on a microscopic analysis that, without ambiguity, reveals the various deformation phenomena and elucidates the physical fundaments of the currently used phenomenological correlations. We identify an easily accessible single parameter derived from the intrinsic energy barriers, which fully specifies the potential diversity of metals. Based entirely on this parameter, a simple deformation mode diagram is shown to delineate a series of convenient design criteria, which clarifies a wide area of material functionality by texture control. PMID:24753563

Cairo consensus on the IVF laboratory environment and air quality: report of an expert meeting.

PubMed

Mortimer, D; Cohen, J; Mortimer, S T; Fawzy, M; McCulloh, D H; Morbeck, D E; Pollet-Villard, X; Mansour, R T; Brison, D R; Doshi, A; Harper, J C; Swain, J E; Gilligan, A V

2018-03-02

This proceedings report presents the outcomes from an international Expert Meeting to establish a consensus on the recommended technical and operational requirements for air quality within modern assisted reproduction technology (ART) laboratories. Topics considered included design and construction of the facility, as well as its heating, ventilation and air conditioning system; control of particulates, micro-organisms (bacteria, fungi and viruses) and volatile organic compounds (VOCs) within critical areas; safe cleaning practices; operational practices to optimize air quality while minimizing physicochemical risks to gametes and embryos (temperature control versus air flow); and appropriate infection-control practices that minimize exposure to VOC. More than 50 consensus points were established under the general headings of assessing site suitability, basic design criteria for new construction, and laboratory commissioning and ongoing VOC management. These consensus points should be considered as aspirational benchmarks for existing ART laboratories, and as guidelines for the construction of new ART laboratories. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

A geospatial evaluation of timely access to surgical care in seven countries

PubMed Central

Banguti, Paulin; Chackungal, Smita; Chanthasiri, Traychit; Chao, Tiffany E; Dahn, Bernice; Derbew, Milliard; Dhar, Debashish; Esquivel, Micaela M; Evans, Faye; Hendel, Simon; LeBrun, Drake G; Notrica, Michelle; Saavedra-Pozo, Iracema; Shockley, Ross; Uribe-Leitz, Tarsicio; Vannavong, Boualy; McQueen, Kelly A; Spain, David A; Weiser, Thomas G

2017-01-01

Abstract: Objective To assess the consistent availability of basic surgical resources at selected facilities in seven countries. Methods In 2010–2014, we used a situational analysis tool to collect data at district and regional hospitals in Bangladesh (n = 14), the Plurinational State of Bolivia (n = 18), Ethiopia (n = 19), Guatemala (n = 20), the Lao People's Democratic Republic (n = 12), Liberia (n = 12) and Rwanda (n = 25). Hospital sites were selected by pragmatic sampling. Data were geocoded and then analysed using an online data visualization platform. Each hospital’s catchment population was defined as the people who could reach the hospital via a vehicle trip of no more than two hours. A hospital was only considered to show consistent availability of basic surgical resources if clean water, electricity, essential medications including intravenous fluids and at least one anaesthetic, analgesic and antibiotic, a functional pulse oximeter, a functional sterilizer, oxygen and providers accredited to perform surgery and anaesthesia were always available. Findings Only 41 (34.2%) of the 120 study hospitals met the criteria for the provision of consistent basic surgical services. The combined catchments of the study hospitals in each study country varied between 3.3 million people in Liberia and 151.3 million people in Bangladesh. However, the combined catchments of the study hospitals in each study country that met the criteria for the provision of consistent basic surgical services were substantially smaller and varied between 1.3 million in Liberia and 79.2 million in Bangladesh. Conclusion Many study facilities were deficient in the basic infrastructure necessary for providing basic surgical care on a consistent basis. PMID:28603310

Enlight: A Comprehensive Quality and Therapeutic Potential Evaluation Tool for Mobile and Web-Based eHealth Interventions

PubMed Central

Faber, Keren; Mathur, Nandita; Kane, John M; Muench, Fred

2017-01-01

Background Studies of criteria-based assessment tools have demonstrated the feasibility of objectively evaluating eHealth interventions independent of empirical testing. However, current tools have not included some quality constructs associated with intervention outcome, such as persuasive design, behavior change, or therapeutic alliance. In addition, the generalizability of such tools has not been explicitly examined. Objective The aim is to introduce the development and further analysis of the Enlight suite of measures, developed to incorporate the aforementioned concepts and address generalizability aspects. Methods As a first step, a comprehensive systematic review was performed to identify relevant quality rating criteria in line with the PRISMA statement. These criteria were then categorized to create Enlight. The second step involved testing Enlight on 42 mobile apps and 42 Web-based programs (delivery mediums) targeting modifiable behaviors related to medical illness or mental health (clinical aims). Results A total of 476 criteria from 99 identified sources were used to build Enlight. The rating measures were divided into two sections: quality assessments and checklists. Quality assessments included usability, visual design, user engagement, content, therapeutic persuasiveness, therapeutic alliance, and general subjective evaluation. The checklists included credibility, privacy explanation, basic security, and evidence-based program ranking. The quality constructs exhibited excellent interrater reliability (intraclass correlations=.77-.98, median .91) and internal consistency (Cronbach alphas=.83-.90, median .88), with similar results when separated into delivery mediums or clinical aims. Conditional probability analysis revealed that 100% of the programs that received a score of fair or above (≥3.0) in therapeutic persuasiveness or therapeutic alliance received the same range of scores in user engagement and content—a pattern that did not appear in the opposite direction. Preliminary concurrent validity analysis pointed to positive correlations of combined quality scores with selected variables. The combined score that did not include therapeutic persuasiveness and therapeutic alliance descriptively underperformed the other combined scores. Conclusions This paper provides empirical evidence supporting the importance of persuasive design and therapeutic alliance within the context of a program’s evaluation. Reliability metrics and preliminary concurrent validity analysis indicate the potential of Enlight in examining eHealth programs regardless of delivery mediums and clinical aims. PMID:28325712

Enlight: A Comprehensive Quality and Therapeutic Potential Evaluation Tool for Mobile and Web-Based eHealth Interventions.

PubMed

Baumel, Amit; Faber, Keren; Mathur, Nandita; Kane, John M; Muench, Fred

2017-03-21

Studies of criteria-based assessment tools have demonstrated the feasibility of objectively evaluating eHealth interventions independent of empirical testing. However, current tools have not included some quality constructs associated with intervention outcome, such as persuasive design, behavior change, or therapeutic alliance. In addition, the generalizability of such tools has not been explicitly examined. The aim is to introduce the development and further analysis of the Enlight suite of measures, developed to incorporate the aforementioned concepts and address generalizability aspects. As a first step, a comprehensive systematic review was performed to identify relevant quality rating criteria in line with the PRISMA statement. These criteria were then categorized to create Enlight. The second step involved testing Enlight on 42 mobile apps and 42 Web-based programs (delivery mediums) targeting modifiable behaviors related to medical illness or mental health (clinical aims). A total of 476 criteria from 99 identified sources were used to build Enlight. The rating measures were divided into two sections: quality assessments and checklists. Quality assessments included usability, visual design, user engagement, content, therapeutic persuasiveness, therapeutic alliance, and general subjective evaluation. The checklists included credibility, privacy explanation, basic security, and evidence-based program ranking. The quality constructs exhibited excellent interrater reliability (intraclass correlations=.77-.98, median .91) and internal consistency (Cronbach alphas=.83-.90, median .88), with similar results when separated into delivery mediums or clinical aims. Conditional probability analysis revealed that 100% of the programs that received a score of fair or above (≥3.0) in therapeutic persuasiveness or therapeutic alliance received the same range of scores in user engagement and content-a pattern that did not appear in the opposite direction. Preliminary concurrent validity analysis pointed to positive correlations of combined quality scores with selected variables. The combined score that did not include therapeutic persuasiveness and therapeutic alliance descriptively underperformed the other combined scores. This paper provides empirical evidence supporting the importance of persuasive design and therapeutic alliance within the context of a program's evaluation. Reliability metrics and preliminary concurrent validity analysis indicate the potential of Enlight in examining eHealth programs regardless of delivery mediums and clinical aims. ©Amit Baumel, Keren Faber, Nandita Mathur, John M Kane, Fred Muench. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 21.03.2017.

Advanced composite structures. [metal matrix composites - structural design criteria for spacecraft construction materials

NASA Technical Reports Server (NTRS)

1974-01-01

A monograph is presented which establishes structural design criteria and recommends practices to ensure the design of sound composite structures, including composite-reinforced metal structures. (It does not discuss design criteria for fiber-glass composites and such advanced composite materials as beryllium wire or sapphire whiskers in a matrix material.) Although the criteria were developed for aircraft applications, they are general enough to be applicable to space vehicles and missiles as well. The monograph covers four broad areas: (1) materials, (2) design, (3) fracture control, and (4) design verification. The materials portion deals with such subjects as material system design, material design levels, and material characterization. The design portion includes panel, shell, and joint design, applied loads, internal loads, design factors, reliability, and maintainability. Fracture control includes such items as stress concentrations, service-life philosophy, and the management plan for control of fracture-related aspects of structural design using composite materials. Design verification discusses ways to prove flightworthiness.

Theory and experiment in gravitational physics

NASA Technical Reports Server (NTRS)

Will, C. M.

1981-01-01

New technological advances have made it feasible to conduct measurements with precision levels which are suitable for experimental tests of the theory of general relativity. This book has been designed to fill a new need for a complete treatment of techniques for analyzing gravitation theory and experience. The Einstein equivalence principle and the foundations of gravitation theory are considered, taking into account the Dicke framework, basic criteria for the viability of a gravitation theory, experimental tests of the Einstein equivalence principle, Schiff's conjecture, and a model theory devised by Lightman and Lee (1973). Gravitation as a geometric phenomenon is considered along with the parametrized post-Newtonian formalism, the classical tests, tests of the strong equivalence principle, gravitational radiation as a tool for testing relativistic gravity, the binary pulsar, and cosmological tests.

Investigation of storage system designs and techniques for optimizing energy conservation in integrated utility systems. Volume 2: (Application of energy storage to IUS)

NASA Technical Reports Server (NTRS)

1976-01-01

The applicability of energy storage devices to any energy system depends on the performance and cost characteristics of the larger basic system. A comparative assessment of energy storage alternatives for application to IUS which addresses the systems aspects of the overall installation is described. Factors considered include: (1) descriptions of the two no-storage IUS baselines utilized as yardsticks for comparison throughout the study; (2) discussions of the assessment criteria and the selection framework employed; (3) a summary of the rationale utilized in selecting water storage as the primary energy storage candidate for near term application to IUS; (4) discussion of the integration aspects of water storage systems; and (5) an assessment of IUS with water storage in alternative climates.

Phobos-Grunt ; Russian Sample Return Mission

NASA Astrophysics Data System (ADS)

Marov, M.

As an important milestone in the Mars exploration, space vehicle of new generation "Phobos-Grunt" is planned to be launched by the Russian Aviation and Space Agency. The project is optimized around Phobos sample return mission and follow up missions targeted to study some Main asteroid belt bodies, NEO , and short period comets. The principal constrain is "Soyuz-Fregat" rather than "Proton" launcher utilization to accomplish these challenging goals. The vehicle design incorporates innovative SEP technology involving electrojet engines that allowed us to increase significantly the missions energetic capabilities, as well as high autonomous on- board systems . Basic criteria underlining the "Phobos-Grunt" mission scenario, scientific objections and rationale, involving Mars observations during the vehicle insertion into Mars orbit and Phobos approach manoeuvres, are discussed and an opportunity for international cooperation is suggested.

Results and conclusions: perception sensor study for high speed autonomous operations

NASA Astrophysics Data System (ADS)

Schneider, Anne; LaCelle, Zachary; Lacaze, Alberto; Murphy, Karl; Close, Ryan

2016-05-01

Previous research has presented work on sensor requirements, specifications, and testing, to evaluate the feasibility of increasing autonomous vehicle system speeds. Discussions included the theoretical background for determining sensor requirements, and the basic test setup and evaluation criteria for comparing existing and prototype sensor designs. This paper will present and discuss the continuation of this work. In particular, this paper will focus on analyzing the problem via a real-world comparison of various sensor technology testing results, as opposed to previous work that utilized more of a theoretical approach. LADAR/LIDAR, radar, visual, and infrared sensors are considered in this research. Results are evaluated against the theoretical, desired perception specifications. Conclusions for utilizing a suite of perception sensors, to achieve the goal of doubling ground vehicle speeds, is also discussed.

Theory and experiment in gravitational physics

NASA Astrophysics Data System (ADS)

Will, C. M.

New technological advances have made it feasible to conduct measurements with precision levels which are suitable for experimental tests of the theory of general relativity. This book has been designed to fill a new need for a complete treatment of techniques for analyzing gravitation theory and experience. The Einstein equivalence principle and the foundations of gravitation theory are considered, taking into account the Dicke framework, basic criteria for the viability of a gravitation theory, experimental tests of the Einstein equivalence principle, Schiff's conjecture, and a model theory devised by Lightman and Lee (1973). Gravitation as a geometric phenomenon is considered along with the parametrized post-Newtonian formalism, the classical tests, tests of the strong equivalence principle, gravitational radiation as a tool for testing relativistic gravity, the binary pulsar, and cosmological tests.

Professional Preparation Guidelines: An AMEG Imperative.

ERIC Educational Resources Information Center

Loesch, Larry

1983-01-01

Discusses the credentialing efforts of the American Association for Counseling and Development. Proposes basic criteria for professional preparation in measurement and evaluation in persons, which elaborate on the general standards currently contained in the AACD standards. (JAC)

Solid propellant grain design and internal ballistics

NASA Technical Reports Server (NTRS)

1972-01-01

The ballistic aspects of grain design were studied to outline the steps necessary to achieve a successful grain design. The relationships of the grain design to steady-state mass balance and erosive burning are considered. Grain design criteria is reviewed, and recommended design criteria are included.

Can high fields save the tokamak? The challenge of steady-state operation for low cost compact reactors

NASA Astrophysics Data System (ADS)

Freidberg, Jeffrey; Dogra, Akshunna; Redman, William; Cerfon, Antoine

2016-10-01

The development of high field, high temperature superconductors is thought to be a game changer for the development of fusion power based on the tokamak concept. We test the validity of this assertion for pilot plant scale reactors (Q 10) for two different but related missions: pulsed operation and steady-state operation. Specifically, we derive a set of analytic criteria that determines the basic design parameters of a given fusion reactor mission. As expected there are far more constraints than degrees of freedom in any given design application. However, by defining the mission of the reactor under consideration, we have been able to determine the subset of constraints that drive the design, and calculate the values for the key parameters characterizing the tokamak. Our conclusions are as follows: 1) for pulsed reactors, high field leads to more compact designs and thus cheaper reactors - high B is the way to go; 2) steady-state reactors with H-mode like transport are large, even with high fields. The steady-state constraint is hard to satisfy in compact designs - high B helps but is not enough; 3) I-mode like transport, when combined with high fields, yields relatively compact steady-state reactors - why is there not more research on this favorable transport regime?

Online Lectures in Undergraduate Medical Education: Scoping Review

PubMed Central

Tang, Brandon; Coret, Alon; Qureshi, Aatif; Barron, Henry; Ayala, Ana Patricia

2018-01-01

Background The adoption of the flipped classroom in undergraduate medical education calls on students to learn from various self-paced tools—including online lectures—before attending in-class sessions. Hence, the design of online lectures merits special attention, given that applying multimedia design principles has been shown to enhance learning outcomes. Objective The aim of this study was to understand how online lectures have been integrated into medical school curricula, and whether published literature employs well-accepted principles of multimedia design. Methods This scoping review followed the methodology outlined by Arksey and O'Malley (2005). Databases, including MEDLINE, PsycINFO, Education Source, FRANCIS, ERIC, and ProQuest, were searched to find articles from 2006 to 2016 related to online lecture use in undergraduate medical education. Results In total, 45 articles met our inclusion criteria. Online lectures were used in preclinical and clinical years, covering basic sciences, clinical medicine, and clinical skills. The use of multimedia design principles was seldom reported. Almost all studies described high student satisfaction and improvement on knowledge tests following online lecture use. Conclusions Integration of online lectures into undergraduate medical education is well-received by students and appears to improve learning outcomes. Future studies should apply established multimedia design principles to the development of online lectures to maximize their educational potential. PMID:29636322

Adolescents and adults at clinical high-risk for psychosis: age-related differences in attenuated positive symptoms syndrome prevalence and entanglement with basic symptoms.

PubMed

Gerstenberg, M; Theodoridou, A; Traber-Walker, N; Franscini, M; Wotruba, D; Metzler, S; Müller, M; Dvorsky, D; Correll, C U; Walitza, S; Rössler, W; Heekeren, K

2016-04-01

The attenuated positive symptoms syndrome (APSS) is considered an at-risk indicator for psychosis. However, the characteristics and developmental aspects of the combined or enriched risk criteria of APSS and basic symptom (BS) criteria, including self-experienced cognitive disturbances (COGDIS) remain under-researched. Based on the Structured Interview of Prodromal Syndromes (SIPS), the prevalence of APSS in 13- to 35-year-old individuals seeking help in an early recognition program for schizophrenia and bipolar-spectrum disorders was examined. BS criteria and COGDIS were rated using the Schizophrenia Proneness Instrument for Adults/Children and Youth. Participants meeting APSS criteria were compared with participants meeting only BS criteria across multiple characteristics. Co-occurrence (APSS+/BS+, APSS+/COGDIS+) was compared across 13-17, 18-22 and 23-35 years age groups. Of 175 individuals (age = 20.6 ± 5.8, female = 38.3%), 94 (53.7%) met APSS criteria. Compared to BS, APSS status was associated with suicidality, higher illness severity, lower functioning, higher SIPS positive, negative, disorganized and general symptoms scores, depression scores and younger age (18.3 ± 5.0 v. 23.2 ± 5.6 years, p < 0.0001) with age-related differences in the prevalence of APSS (ranging from 80.3% in 13- to 17-year-olds to 33.3% in 23- to 35-year-olds (odds ratio 0.21, 95% confidence interval 0.11-0.37). Within APSS+ individuals, fewer adolescents fulfilled combined risk criteria of APSS+/BS+ or APSS+/COGDIS+ compared to the older age groups. APSS status was associated with greater suicidality and illness/psychophathology severity in this help-seeking cohort, emphasizing the need for clinical care. The age-related differences in the prevalence of APSS and the increasing proportion of APSS+/COGDIS+ may point to a higher proportion of non-specific/transient, rather than risk-specific attenuated positive symptoms in adolescents.

Basic Research in Digital Stochastic Model Algorithmic Control.

DTIC Science & Technology

1980-11-01

IDCOM Description 115 8.2 Basic Control Computation 117 8.3 Gradient Algorithm 119 8.4 Simulation Model 119 8.5 Model Modifications 123 8.6 Summary 124...constraints, and 3) control traJectorv comouta- tion. 2.1.1 Internal Model of the System The multivariable system to be controlled is represented by a...more flexible and adaptive, since the model , criteria, and sampling rates can be adjusted on-line. This flexibility comes from the use of the impulse

Global design of satellite constellations: a multi-criteria performance comparison of classical walker patterns and new design patterns

NASA Astrophysics Data System (ADS)

Lansard, Erick; Frayssinhes, Eric; Palmade, Jean-Luc

Basically, the problem of designing a multisatellite constellation exhibits a lot of parameters with many possible combinations: total number of satellites, orbital parameters of each individual satellite, number of orbital planes, number of satellites in each plane, spacings between satellites of each plane, spacings between orbital planes, relative phasings between consecutive orbital planes. Hopefully, some authors have theoretically solved this complex problem under simplified assumptions: the permanent (or continuous) coverage by a single and multiple satellites of the whole Earth and zonal areas has been entirely solved from a pure geometrical point of view. These solutions exhibit strong symmetry properties (e.g. Walker, Ballard, Rider, Draim constellations): altitude and inclination are identical, orbital planes and satellites are regularly spaced, etc. The problem with such constellations is their oversimplified and restricted geometrical assumption. In fact, the evaluation function which is used implicitly only takes into account the point-to-point visibility between users and satellites and does not deal with very important constraints and considerations that become mandatory when designing a real satellite system (e.g. robustness to satellite failures, total system cost, common view between satellites and ground stations, service availability and satellite reliability, launch and early operations phase, production constraints, etc.). An original and global methodology relying on a powerful optimization tool based on genetic algorithms has been developed at ALCATEL ESPACE. In this approach, symmetrical constellations can be used as initial conditions of the optimization process together with specific evaluation functions. A multi-criteria performance analysis is conducted and presented here in a parametric way in order to identify and evaluate the main sensitive parameters. Quantitative results are given for three examples in the fields of navigation, telecommunication and multimedia satellite systems. In particular, a new design pattern with very efficient properties in terms of robustness to satellite failures is presented and compared with classical Walker patterns.

Analysis of improved criteria for mold growth in ASHRAE standard 160 by comparison with field observations

Treesearch

Samuel V. Glass; Stanley D. Gatland II; Kohta Ueno; Christopher J. Schumacher

2017-01-01

ASHRAE Standard 160, Criteria for Moisture-Control Design Analysis in Buildings, was published in 2009. The standard sets criteria for moisture design loads, hygrothermal analysis methods, and satisfactory moisture performance of the building envelope. One of the evaluation criteria specifies conditions necessary to avoid mold growth. The current standard requires that...

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Development of a QFD-based expert system for CNC turning centre selection

NASA Astrophysics Data System (ADS)

Prasad, Kanika; Chakraborty, Shankar

2015-12-01

Computer numerical control (CNC) machine tools are automated devices capable of generating complicated and intricate product shapes in shorter time. Selection of the best CNC machine tool is a critical, complex and time-consuming task due to availability of a wide range of alternatives and conflicting nature of several evaluation criteria. Although, the past researchers had attempted to select the appropriate machining centres using different knowledge-based systems, mathematical models and multi-criteria decision-making methods, none of those approaches has given due importance to the voice of customers. The aforesaid limitation can be overcome using quality function deployment (QFD) technique, which is a systematic approach for integrating customers' needs and designing the product to meet those needs first time and every time. In this paper, the adopted QFD-based methodology helps in selecting CNC turning centres for a manufacturing organization, providing due importance to the voice of customers to meet their requirements. An expert system based on QFD technique is developed in Visual BASIC 6.0 to automate the CNC turning centre selection procedure for different production plans. Three illustrative examples are demonstrated to explain the real-time applicability of the developed expert system.

Automation of orbit determination functions for National Aeronautics and Space Administration (NASA)-supported satellite missions

NASA Technical Reports Server (NTRS)

Mardirossian, H.; Beri, A. C.; Doll, C. E.

1990-01-01

The Flight Dynamics Facility (FDF) at Goddard Space Flight Center (GSFC) provides spacecraft trajectory determination for a wide variety of National Aeronautics and Space Administration (NASA)-supported satellite missions, using the Tracking Data Relay Satellite System (TDRSS) and Ground Spaceflight and Tracking Data Network (GSTDN). To take advantage of computerized decision making processes that can be used in spacecraft navigation, the Orbit Determination Automation System (ODAS) was designed, developed, and implemented as a prototype system to automate orbit determination (OD) and orbit quality assurance (QA) functions performed by orbit operations. Based on a machine-resident generic schedule and predetermined mission-dependent QA criteria, ODAS autonomously activates an interface with the existing trajectory determination system using a batch least-squares differential correction algorithm to perform the basic OD functions. The computational parameters determined during the OD are processed to make computerized decisions regarding QA, and a controlled recovery process is activated when the criteria are not satisfied. The complete cycle is autonomous and continuous. ODAS was extensively tested for performance under conditions resembling actual operational conditions and found to be effective and reliable for extended autonomous OD. Details of the system structure and function are discussed, and test results are presented.

Automation of orbit determination functions for National Aeronautics and Space Administration (NASA)-supported satellite missions

NASA Technical Reports Server (NTRS)

Mardirossian, H.; Heuerman, K.; Beri, A.; Samii, M. V.; Doll, C. E.

1989-01-01

The Flight Dynamics Facility (FDF) at Goddard Space Flight Center (GSFC) provides spacecraft trajectory determination for a wide variety of National Aeronautics and Space Administration (NASA)-supported satellite missions, using the Tracking Data Relay Satellite System (TDRSS) and Ground Spaceflight and Tracking Data Network (GSTDN). To take advantage of computerized decision making processes that can be used in spacecraft navigation, the Orbit Determination Automation System (ODAS) was designed, developed, and implemented as a prototype system to automate orbit determination (OD) and orbit quality assurance (QA) functions performed by orbit operations. Based on a machine-resident generic schedule and predetermined mission-dependent QA criteria, ODAS autonomously activates an interface with the existing trajectory determination system using a batch least-squares differential correction algorithm to perform the basic OD functions. The computational parameters determined during the OD are processed to make computerized decisions regarding QA, and a controlled recovery process isactivated when the criteria are not satisfied. The complete cycle is autonomous and continuous. ODAS was extensively tested for performance under conditions resembling actual operational conditions and found to be effective and reliable for extended autonomous OD. Details of the system structure and function are discussed, and test results are presented.

[Medical education in a bachelors and masters system].

PubMed

Harendza, S; Guse, A H

2009-09-01

Gain of basic and applied medical knowledge and the changing demands of society with regard to medical professions are the main factors for continuous reforms in medical curricula. The Bologna Declaration of 1999 initiated the development of a unified European higher education area. A key tool for unification is the introduction of the Bachelors/Masters system. Although some European countries have adapted their medical curricula to the Bachelors/Masters system there is still debate on this issue in Germany. Some societies, e.g., the Society for Medical Education, demonstrated how the Bachelors/Masters system might be transferred to Germany. Moreover, the German Association of Medical Students already published a core curriculum compatible with the Bologna criteria. Some central elements of the Bologna Declaration have already been or could easily be integrated into the current structure of medical studies, e.g., quality assurance or a credit point transfer system. Furthermore, in the framework of the German medical licensure law, it is possible to introduce a curriculum fully compatible with the Bologna Declaration. A meaningful prerequisite would be a unified national (or European) qualification frame and catalog of learning objectives, designed according to the Bologna criteria. This should guarantee good mobility for medical students within Europe.

Translating government policy into recipes for success! Nutrition criteria promoting fruits and vegetables.

PubMed

Pollard, Christina M; Nicolson, Clemency; Pulker, Claire E; Binns, Colin W

2009-01-01

To develop nutrition criteria consistent with Australian dietary guidelines encouraging fruit and vegetable consumption for branding recipes with the Go for 2&5 campaign message. Dietary policies, guidelines, food selection guides, nutrient targets, existing consumer education programs' nutrition criteria, food habits, and eating styles were reviewed to develop nutrition criteria, which were then used to assess 128 recipes. Perth, Australia. Recipes were analyzed then assessed against criteria for fat, sodium, fiber, energy, added sugar, fruit, vegetables, cereal, and dairy content/per serving. Recipe nutrition criteria were devised, and 128 contemporary industry recipes were evaluated according to developed nutrition criteria. Recipe categories included main meals; light meals (includes breakfast); soups; salads; side dishes; snacks (includes drinks); desserts; bakery; and basic ingredients (eg, stocks, dips, and sauces). Nearly three quarters failed. Excess fat (45%) and sodium (30%) and inadequate cereal (24%) were the main reasons. Only minor modifications were required to meet criteria. "Healthful" recipes promoting fruits and vegetables were often high in fat and sodium and low in cereal content. Nutrition criteria developed for this study provided a practical way of assessing specific meals and snacks according to the dietary guidelines, making them suitable for nutrition promotions.

The preliminary design and feasibility study of the spent fuel and high level waste repository in the Czech Republic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valvoda, Z.; Holub, J.; Kucerka, M.

1996-12-31

In the year 1993, began the Program of Development of the Spent Fuel and High Level Waste Repository in the Conditions of the Czech Republic. During the first phase, the basic concept and structure of the Program has been developed, and the basic design criteria and requirements were prepared. In the conditions of the Czech Republic, only an underground repository in deep geological formation is acceptable. Expected depth is between 500 to 1000 meters and as host rock will be granites. A preliminary variant design study was realized in 1994, that analyzed the radioactive waste and spent fuel flow frommore » NPPs to the repository, various possibilities of transportation in accordance to the various concepts of spent fuel conditioning and transportation to the underground structures. Conditioning and encapsulation of spent fuel and/or radioactive waste is proposed on the repository site. Underground disposal structures are proposed at one underground floor. The repository will have reserve capacity for radioactive waste from NPPs decommissioning and for waste non acceptable to other repositories. Vertical disposal of unshielded canisters in boreholes and/or horizontal disposal of shielded canisters is studied. As the base term of the start up of the repository operation, the year 2035 has been established. From this date, a preliminary time schedule of the Project has been developed. A method of calculating leveled and discounted costs within the repository lifetime, for each of selected 5 variants, was used for economic calculations. Preliminary expected parametric costs of the repository are about 0,1 Kc ($0.004) per MWh, produced in the Czech NPPs. In 1995, the design and feasibility study has gone in more details to the technical concept of repository construction and proposed technologies, as well as to the operational phase of the repository. Paper will describe results of the 1995 design work and will present the program of the repository development in next period.« less

The design of low cost structures for extensive ground arrays

NASA Technical Reports Server (NTRS)

Franklin, H. A.; Leonard, R. S.

1980-01-01

The development of conceptual designs of solar array support structures and their foundations including considerations of the use of concrete, steel, aluminum, or timber are reported. Some cost trends were examined by varying selected parameters to determine optimum configurations. Detailed civil/structural design criteria were developed. Using these criteria, eight detailed designs for support structures and foundations were developed and cost estimates were made. As a result of the study wind was identified as the major loading experienced by these low height structures, whose arrays are likely to extend over large tracts of land. Proper wind load estimating is considered essential to developing realistic structural designs and achieving minimum cost support structures. Wind tunnel testing of a conceptual array field was undertaken and some of the resulting wind design criteria are presented. The SPS rectenna system designs may be less sensitive to wind load estimates, but consistent design criteria remain important.

Explosive safety criteria at a Department of Energy contractor facility

NASA Astrophysics Data System (ADS)

Krach, F.

1984-08-01

Monsanto Research Corporation (MRC) operates the Mound facility in Miamisburg, Ohio, for the Department of Energy. Small explosive components are manufactured at MRC, and stringent explosive safety criteria have been developed for their manufacturing. The goals of these standards are to reduce employee injuries and eliminate fenceline impacts resulting from accidental detonations. The manner in which these criteria were developed and what DOD standards were incorporated into MRC's own design criteria are described. These design requirements are applicable to all new construction at MRC. An example of the development of the design of a Component Test Facility is presented to illustrate the application of the criteria.

Multi-criteria evaluation methods in the production scheduling

NASA Astrophysics Data System (ADS)

Kalinowski, K.; Krenczyk, D.; Paprocka, I.; Kempa, W.; Grabowik, C.

2016-08-01

The paper presents a discussion on the practical application of different methods of multi-criteria evaluation in the process of scheduling in manufacturing systems. Among the methods two main groups are specified: methods based on the distance function (using metacriterion) and methods that create a Pareto set of possible solutions. The basic criteria used for scheduling were also described. The overall procedure of evaluation process in production scheduling was presented. It takes into account the actions in the whole scheduling process and human decision maker (HDM) participation. The specified HDM decisions are related to creating and editing a set of evaluation criteria, selection of multi-criteria evaluation method, interaction in the searching process, using informal criteria and making final changes in the schedule for implementation. According to need, process scheduling may be completely or partially automated. Full automatization is possible in case of metacriterion based objective function and if Pareto set is selected - the final decision has to be done by HDM.

25 CFR 36.112 - Can a homeliving program be closed, transferred, consolidated, or substantially curtailed for...

Code of Federal Regulations, 2010 CFR

2010-04-01

... BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs Waivers and...

Characteristic of Adaptability - one of basic categories of the social aspect of sustainable housing construction

NASA Astrophysics Data System (ADS)

Orłowski, Z.; Radziejowska, A.; Orłowski, M.

2017-10-01

In the article the authors consider one of the basic aspects of sustainable construction regarding the social utility of a building. According to standard PN-EN 16309+A1:2014-12 during evaluating the social aspect should be assessed six categories: accessibility, adaptability, comfort and health, neighborhood, maintenance, safety and security. The authors present the evaluation criteria witch should be taken into account in the assessment of the second of them. Adaptability has been divided into three categories: The buidling’s ability to accomodate the change of user requirements, The buidling’s ability to accomodate technical changes, The buidling’s ability to accomodate the change of use. Each subcategory has been further elaborated by the criteria for which authors present proposal for the scale of assessments. The authors present a part of a work to construct a method for assessing the social characteristics of the residential buildings.

Scalability enhancement of AODV using local link repairing

NASA Astrophysics Data System (ADS)

Jain, Jyoti; Gupta, Roopam; Bandhopadhyay, T. K.

2014-09-01

Dynamic change in the topology of an ad hoc network makes it difficult to design an efficient routing protocol. Scalability of an ad hoc network is also one of the important criteria of research in this field. Most of the research works in ad hoc network focus on routing and medium access protocols and produce simulation results for limited-size networks. Ad hoc on-demand distance vector (AODV) is one of the best reactive routing protocols. In this article, modified routing protocols based on local link repairing of AODV are proposed. Method of finding alternate routes for next-to-next node is proposed in case of link failure. These protocols are beacon-less, means periodic hello message is removed from the basic AODV to improve scalability. Few control packet formats have been changed to accommodate suggested modification. Proposed protocols are simulated to investigate scalability performance and compared with basic AODV protocol. This also proves that local link repairing of proposed protocol improves scalability of the network. From simulation results, it is clear that scalability performance of routing protocol is improved because of link repairing method. We have tested protocols for different terrain area with approximate constant node densities and different traffic load.

Do European hospitals have quality and safety governance systems and structures in place?

PubMed

Shaw, C; Kutryba, B; Crisp, H; Vallejo, P; Suñol, R

2009-02-01

Internal systems for quality and safety were assessed in 89 hospitals in six European states, by external teams using standardised criteria and procedures, as part of the Methods of Assessing Response to Quality Improvement Strategies (MARQuIS) project. The assessments were made primarily to identify the current use of quality management systems in the sample hospitals, and also to demonstrate a potential tool for comparable assessment of hospitals in general. The large majority of the hospitals had a formal, documented infrastructure to manage quality and safety, but a significant minority had no designated mission, programme or coordination. In two-thirds of hospitals, the governing body was active in defining policy and programmes for improvement, and received reports on quality, safety and patient satisfaction at least once a year. The brief on-site assessments identified systematic variations, within and between countries, in structures and processes of governance and to document the uptake of best practice. Unacceptable variations in practice could be reduced, to the benefit of consumers and providers, by developing and publishing basic organisational standards relevant to all European states. The simple assessment criteria designed for this project could be developed into a practical tool for self-assessment, peer review or benchmarking of hospitals across national borders. This assessment, combined with explicit, relevant and achievable standards, could provide a vehicle to promote the voluntary uptake of best practice and consistency in quality and safety among hospitals in Europe.

42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

Code of Federal Regulations, 2013 CFR

2013-10-01

... of Dental Professional(s) B Appendix B to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. B Appendix B to Part 5—Criteria for Designation of Areas Having Shortages of Dental Professional... designated as having a shortage of dental professional(s) if both the following criteria are met: (a) The...

42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

Code of Federal Regulations, 2012 CFR

2012-10-01

... of Dental Professional(s) B Appendix B to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. B Appendix B to Part 5—Criteria for Designation of Areas Having Shortages of Dental Professional... designated as having a shortage of dental professional(s) if both the following criteria are met: (a) The...

42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Dental Professional(s) B Appendix B to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. B Appendix B to Part 5—Criteria for Designation of Areas Having Shortages of Dental Professional... designated as having a shortage of dental professional(s) if both the following criteria are met: (a) The...

42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

Code of Federal Regulations, 2014 CFR

2014-10-01

... of Dental Professional(s) B Appendix B to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. B Appendix B to Part 5—Criteria for Designation of Areas Having Shortages of Dental Professional... designated as having a shortage of dental professional(s) if both the following criteria are met: (a) The...

42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

Code of Federal Regulations, 2011 CFR

2011-10-01

... of Dental Professional(s) B Appendix B to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. B Appendix B to Part 5—Criteria for Designation of Areas Having Shortages of Dental Professional... designated as having a shortage of dental professional(s) if both the following criteria are met: (a) The...

Current knowledge of scoliosis in physiotherapy students trained in the United Kingdom.

PubMed

Black, D A Jason; Pilcher, Christine; Drake, Shawn; Maude, Erika; Glynn, David

2017-01-01

It has been highlighted in both Poland and the United States of America (USA) that knowledge of idiopathic scoliosis (IS) among physiotherapy students is limited with respect to the 2011 International Society on Scoliosis Orthopaedic and Rehabilitation Treatment (SOSORT) guidelines. Early detection of scoliosis and correct initial management is essential in effective care, and thus physiotherapists should be aware of the basic criteria for diagnosis and indications for treatment. The aim of this study was to evaluate the basic knowledge of IS in physiotherapy students trained in the United Kingdom (UK). A previously designed and tested 10-question survey, including knowledge of the 2011 SOSORT guidelines, was transcribed onto an online-survey platform. Questions were designed to analyse knowledge of definition, cause, development, prevalence, diagnosis, treatment and bracing of scoliosis. All UK universities offering physiotherapy degrees were invited to participate, with the programme lead of each institution asked to distribute the questionnaire to all penultimate and final year physiotherapy students (bachelor's and master's degrees). The final number of students who received the study invitation is unknown. The survey link closed after 8 weeks of data collection. Two hundred and six students, split over 12 institutions, successfully completed the questionnaire. Analysis showed that 79% of students recognised when IS is likely to develop, yet only 52% recognised that IS's aetiology is unknown. Eighty-eight percent of students incorrectly defined IS as a 2-dimensional deformity, with only 24% successfully recognising the prevalence of IS within the scoliosis population. Just 12% knew the criteria for diagnosis; however, 93% were unable to recognise the appropriate treatment approach through therapeutic exercise. Finally, 54% of students managed to identify correctly when bracing is recommended for IS. In comparison to previous studies within the USA, students in the UK performed worse in relation to all questions except treatment (7% answered correctly vs 3% in the American study). With only 7% of students able to answer > 50% of the survey questions correctly, there is a clear lack of knowledge of appropriate IS diagnosis and care which could directly impact the information these patients are given within the first contact primary care in the UK.

Wind/tornado design criteria, development to achieve required probabilistic performance goals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, D.S.

1991-06-01

This paper describes the strategy for developing new design criteria for a critical facility to withstand loading induced by the wind/tornado hazard. The proposed design requirements for resisting wind/tornado loads are based on probabilistic performance goals. The proposed design criteria were prepared by a Working Group consisting of six experts in wind/tornado engineering and meteorology. Utilizing their best technical knowledge and judgment in the wind/tornado field, they met and discussed the methodologies and reviewed available data. A review of the available wind/tornado hazard model for the site, structural response evaluation methods, and conservative acceptance criteria lead to proposed design criteriamore » that has a high probability of achieving the required performance goals.« less

Suppression criteria of parasitic mode oscillations in a gyrotron beam tunnel

NASA Astrophysics Data System (ADS)

Kumar, Nitin; Singh, Udaybir; Singh, T. P.; Sinha, A. K.

2011-02-01

This paper presents the design criteria of the parasitic mode oscillations suppression for a periodic, ceramic, and copper loaded gyrotron beam tunnel. In such a type of beam tunnel, the suppression of parasitic mode oscillations is an important design problem. A method of beam-wave coupling coefficient and its mathematical formulation are presented. The developed design criteria are used in the beam tunnel design of a 42 GHz gyrotron to be developed for the Indian TOKAMAK system. The role of the thickness and the radius of the beam tunnel copper rings to obtain the developed design criteria are also discussed. The commercially available electromagnetic code CST and the electron trajectory code EGUN are used for the simulations.

Wind/tornado design criteria, development to achieve required probabilistic performance goals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, D.S.

This paper describes the strategy for developing new design criteria for a critical facility to withstand loading induced by the wind/tornado hazard. The proposed design requirements for resisting wind/tornado loads are based on probabilistic performance goals. The proposed design criteria were prepared by a Working Group consisting of six experts in wind/tornado engineering and meteorology. Utilizing their best technical knowledge and judgment in the wind/tornado field, they met and discussed the methodologies and reviewed available data. A review of the available wind/tornado hazard model for the site, structural response evaluation methods, and conservative acceptance criteria lead to proposed design criteriamore » that has a high probability of achieving the required performance goals.« less

10 CFR 60.130 - General considerations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository Operations Area § 60.130 General... for a high-level radioactive waste repository at a geologic repository operations area, and an... geologic repository operations area, must include the principal design criteria for a proposed facility...

Natural environment design criteria for the Space Station definition and preliminary design

NASA Astrophysics Data System (ADS)

Vaughan, W. W.; Green, C. E.

1985-03-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Technical Reports Server (NTRS)

Vaughan, W. W.; Green, C. E.

1985-01-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

A Data Definition Language for GLAD (Graphic Language for Databases).

DTIC Science & Technology

1986-06-20

basic premises. These principles state that a DBMS interface must be descriptive, powerful, easy-to use and easy to learn . This thesis proposes a data...basic premises. These principles state that a DBMS interface must be descriptive, powerful, easy to use and easy to learn . This thesis proposes a data...criteria will be the most successful. 9 If a system is hard to learn , of those capable of mastering the system few may be willing to expend the time and

A Methodology for Determining Land Value and Associated Benefits Created from Dredged Material Containment.

DTIC Science & Technology

1978-06-01

accessibility. 228. The diagram below represents the basic relationship among the physical criteria: n^^^o MLl»3 Geographic Location Setting ^ r-; 11 T>,r...value is the difference be- tween the raw site value and the development value. The diagram below illustrates the basic relationship among the...except for the effect of demand on market price and the length of time that a site would remain on the market. The diagram below illustrates the

DRY CUPPING IN CHILDREN WITH FUNCTIONAL CONSTIPATION: A RANDOMIZED OPEN LABEL CLINICAL TRIAL.

PubMed

Shahamat, Mahmoud; Daneshfard, Babak; Najib, Khadijeh-Sadat; Dehghani, Seyed Mohsen; Tafazoli, Vahid; Kasalaei, Afshineh

2016-01-01

As a common disease in pediatrics, constipation poses a high burden to the community. In this study, we aimed to investigate the efficacy of dry cupping therapy (an Eastern traditional manipulative therapy) in children with functional constipation. One hundred and twenty children (4-18 years old) diagnosed as functional constipation according to ROME III criteria were assigned to receive a traditional dry cupping protocol on the abdominal wall for 8 minutes every other day or standard laxative therapy (Polyethylene glycol (PEG) 40% solution without electrolyte), 0.4 g/kg once daily) for 4 weeks, in an open label randomized controlled clinical trial using a parallel design with a 1:1 allocation ratio. Patients were evaluated prior to and following 2, 4, 8 and 12 weeks of the intervention commencement in terms of the ROME III criteria for functional constipation. There were no significant differences between the two arms regarding demographic and clinical basic characteristics. After two weeks of the intervention, there was a significant better result in most of the items of ROME III criteria of patients in PEG group. In contrast, after four weeks of the intervention, the result was significantly better in the cupping group. There was no significant difference in the number of patients with constipation after 4 and 8 weeks of the follow-up period. This study showed that dry cupping of the abdominal wall, as a traditional manipulative therapy, can be as effective as standard laxative therapy in children with functional constipation.

Evaluation and selection of decision-making methods to assess landfill mining projects.

PubMed

Hermann, Robert; Baumgartner, Rupert J; Vorbach, Stefan; Ragossnig, Arne; Pomberger, Roland

2015-09-01

For the first time in Austria, fundamental technological and economic studies on recovering secondary raw materials from large landfills have been carried out, based on the 'LAMIS - Landfill Mining Austria' pilot project. A main focus of the research - and the subject of this article - was to develop an assessment or decision-making procedure that allows landfill owners to thoroughly examine the feasibility of a landfill mining project in advance. Currently there are no standard procedures that would sufficiently cover all the multiple-criteria requirements. The basic structure of the multiple attribute decision making process was used to narrow down on selection, conceptual design and assessment of suitable procedures. Along with a breakdown into preliminary and main assessment, the entire foundation required was created, such as definitions of requirements to an assessment method, selection and accurate description of the various assessment criteria and classification of the target system for the present 'landfill mining' vs. 'retaining the landfill in after-care' decision-making problem. Based on these studies, cost-utility analysis and the analytical-hierarchy process were selected from the range of multiple attribute decision-making procedures and examined in detail. Overall, both methods have their pros and cons with regard to their use for assessing landfill mining projects. Merging these methods or connecting them with single-criteria decision-making methods (like the net present value method) may turn out to be reasonable and constitute an appropriate assessment method. © The Author(s) 2015.

A Report of the Nuclear Engineering Division Sessions at the 1971 ASEE Annual Conference

ERIC Educational Resources Information Center

Eckley, Wayne; Nelson, George W.

1972-01-01

Summarizes the discussions at the conference under the topics, Objective Criteria for the Future" and Teaching Concepts Basic to Nuclear Engineering." Includes comments from personnel representing universities, industries, and government laboratories. (TS)

The Spatial Vision Tree: A Generic Pattern Recognition Engine- Scientific Foundations, Design Principles, and Preliminary Tree Design

NASA Technical Reports Server (NTRS)

Rahman, Zia-ur; Jobson, Daniel J.; Woodell, Glenn A.

2010-01-01

New foundational ideas are used to define a novel approach to generic visual pattern recognition. These ideas proceed from the starting point of the intrinsic equivalence of noise reduction and pattern recognition when noise reduction is taken to its theoretical limit of explicit matched filtering. This led us to think of the logical extension of sparse coding using basis function transforms for both de-noising and pattern recognition to the full pattern specificity of a lexicon of matched filter pattern templates. A key hypothesis is that such a lexicon can be constructed and is, in fact, a generic visual alphabet of spatial vision. Hence it provides a tractable solution for the design of a generic pattern recognition engine. Here we present the key scientific ideas, the basic design principles which emerge from these ideas, and a preliminary design of the Spatial Vision Tree (SVT). The latter is based upon a cryptographic approach whereby we measure a large aggregate estimate of the frequency of occurrence (FOO) for each pattern. These distributions are employed together with Hamming distance criteria to design a two-tier tree. Then using information theory, these same FOO distributions are used to define a precise method for pattern representation. Finally the experimental performance of the preliminary SVT on computer generated test images and complex natural images is assessed.

Design of a dee vacuum vessel for Doublet III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, L.G.

1983-04-01

The Doublet III tokamak is to be modified wherein the original 'doublet' plasma containment vacuum vessel will be exchanged with one of a large dee-shaped cross section. The basic dimensions of the dee vessel will allow plasmas of 1.7-m major radius, 0.7-m minor radius, and a vertical elongation of 1.8. Installation of a large dee vessel in Doublet III is made possible by the demountable toroidal field coils and the large, low-ripple volume they include. Ripple at the plasma edge will be less than one percent. The plasma parameters affecting the design of the vessel will be reviewed including plasmamore » current, power, disruption time, allowable error field, impurity control techniques, pulse length, and limiter schemes. A driving requirement for the design of the vessel is to maximize the access to the plasma for auxiliary heating (both neutral beam injection and radio frequency heating), diagnostics, developmental component and material testing, and pumping. The dee vessel is structurally designed along the same lines as the present vessel: an Inconel 625, all-welded, continuous chamber in a corrugated sandwich construction. An overview of the vessel design and its solutions to the design criteria will be presented. An overview will also be presented of the entire modification project which includes replacement of some coils, and addition of support structure, limiters and vessel armor, and power system components.« less

Design criteria for a self-actuated shutdown system to ensure limitation of core damage. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deane, N.A.; Atcheson, D.B.

1981-09-01

Safety-based functional requirements and design criteria for a self-actuated shutdown system (SASS) are derived in accordance with LOA-2 success criteria and reliability goals. The design basis transients have been defined and evaluated for the CDS Phase II design, which is a 2550 MWt mixed oxide heterogeneous core reactor. A partial set of reactor responses for selected transients is provided as a function of SASS characteristics such as reactivity worth, trip points, and insertion times.

A Method to Develop Neck Injury Criteria to Aid Design and Test of Escape Systems Incorporating Helmet Mounted Displays

DTIC Science & Technology

2014-09-01

The military aviation community began designing and building ejection seats for high speed aircraft after World War II. As pilot safety became...AFIT-ENV-DS-14-S-22 A METHOD TO DEVELOP NECK INJURY CRITERIA TO AID DESIGN AND TEST OF ESCAPE SYSTEMS...protection in the United States. AFIT-ENV-DS-14-S-22 A METHOD TO DEVELOP NECK INJURY CRITERIA TO AID DESIGN AND TEST OF ESCAPE SYSTEMS

Carrier rockets

NASA Astrophysics Data System (ADS)

Aleksandrov, V. A.; Vladimirov, V. V.; Dmitriev, R. D.; Osipov, S. O.

This book takes into consideration domestic and foreign developments related to launch vehicles. General information concerning launch vehicle systems is presented, taking into account details of rocket structure, basic design considerations, and a number of specific Soviet and American launch vehicles. The basic theory of reaction propulsion is discussed, giving attention to physical foundations, the various types of forces acting on a rocket in flight, basic parameters characterizing rocket motion, the effectiveness of various approaches to obtain the desired velocity, and rocket propellants. Basic questions concerning the classification of launch vehicles are considered along with construction and design considerations, aspects of vehicle control, reliability, construction technology, and details of structural design. Attention is also given to details of rocket motor design, the basic systems of the carrier rocket, and questions of carrier rocket development.

Liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. [design techniques and practices

NASA Technical Reports Server (NTRS)

1973-01-01

The development of and operational programs for effective use in design are presented for liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. A review of the total design problem is presented, and design elements are identified which are involved in successful design. Current technology pertaining to these elements is also described. Design criteria are presented which state what rule or standard must be imposed on each essential design element to assure successful design. These criteria serve as a checklist of rules for a project manager to use in guiding a design or in assessing its adequacy. Recommended practices are included which state how to satisfy each of the criteria.

Optimizing Parameters of Axial Pressure-Compounded Ultra-Low Power Impulse Turbines at Preliminary Design

NASA Astrophysics Data System (ADS)

Kalabukhov, D. S.; Radko, V. M.; Grigoriev, V. A.

2018-01-01

Ultra-low power turbine drives are used as energy sources in auxiliary power systems, energy units, terrestrial, marine, air and space transport within the confines of shaft power N td = 0.01…10 kW. In this paper we propose a new approach to the development of surrogate models for evaluating the integrated efficiency of multistage ultra-low power impulse turbine with pressure stages. This method is based on the use of existing mathematical models of ultra-low power turbine stage efficiency and mass. It has been used in a method for selecting the rational parameters of two-stage axial ultra-low power turbine. The article describes the basic features of an algorithm for two-stage turbine parameters optimization and for efficiency criteria evaluating. Pledged mathematical models are intended for use at the preliminary design of turbine drive. The optimization method was tested at preliminary design of an air starter turbine. Validation was carried out by comparing the results of optimization calculations and numerical gas-dynamic simulation in the Ansys CFX package. The results indicate a sufficient accuracy of used surrogate models for axial two-stage turbine parameters selection

Related Addictive Disorders.

ERIC Educational Resources Information Center

Buck, Tina; Sales, Amos

This paper provides an overview of addiction related to substance abuse. It provides basic information, prevalence, diagnostic criteria, assessment tools, and treatment issues for eating disorders, compulsive gambling, sex addictions, and work addictions. Eating disorders such as anorexia nervosa and bulimia nervosa, especially affect adolescents.…

34 CFR 668.146 - Criteria for approving tests.

Code of Federal Regulations, 2010 CFR

2010-07-01

... approved under this subpart, a test shall— (1) Assess secondary school level basic verbal and quantitative... verbal and quantitative skills with sufficient numbers of questions to— (i) Adequately represent each... the American Educational Research Association, the American Psychological Association, and the...

WATER QUALITY IN SOURCE WATER, TREATMENT, AND DISTRIBUTION SYSTEMS

EPA Science Inventory

Most drinking water utilities practice the multiple-barrier concept as the guiding principle for providing safe water. This chapter discusses multiple barriers as they relate to the basic criteria for selecting and protecting source waters, including known and potential sources ...

Corps of Engineers Hydraulic Design Criteria. Volume I

DTIC Science & Technology

1977-01-01

DESIGN CRITERIA CLASSIFICATION INDEX S000-GENERAL 000 Physical Constants 001 Fluid Properties 010 Open Channel Flow 020 Free Overflow 030 Pressure Flow...Dissipation 113 Erosion below Spillways 120 Chute Spillways 121 Approach Channel 122 Ogee Crests 123 Spillay Chutes S ii124 Spillway Stilling Basins 125...Spillvay Exit Channel Revised 5-59 .. . j1.I.i edCORPS OF ENGINEERS HYDRAULIC DESIGN CRITERIA CLASSIFICATION INDEX (Continued) %. IO0-SPILLWAYS

Galactic and Solar Cosmic Ray Shielding in Deep Space

NASA Technical Reports Server (NTRS)

Wilson, John W.; Cucinotta, Francis A.; Tai, H.; Simonsen, Lisa C.; Shinn, Judy L.; Thibeault, Shelia; Kim, M. Y.

1997-01-01

An analysis of the radiation hazards in support of NASA deep space exploration activities is presented. The emphasis is on materials required for radiation protection shielding. Aluminum has been found to be a poor shield material when dose equivalent is used with exposure limits for low Earth orbit (LEO) as a guide for shield requirements. Because the radiation issues are cost related-the parasitic shield mass has high launch costs, the use of aluminum as a basic construction material is clearly not cost-effective and alternate materials need to be developed. In this context, polyethylene is examined as a potentially useful material and demonstrates important advantages as an alternative to aluminum construction. Although polyethylene is useful as a shield material, it may not meet other design criteria (strength, stability, thermal); other polymer materials must be examined.

Radar studies of arctic ice and development of a real-time Arctic ice type identification system

NASA Technical Reports Server (NTRS)

Rouse, J. W., Jr.; Schell, J. A.; Permenter, J. A.

1973-01-01

Studies were conducted to develop a real-time Arctic ice type identification system. Data obtained by NASA Mission 126, conducted at Pt. Barrow, Alaska (Site 93) in April 1970 was analyzed in detail to more clearly define the major mechanisms at work affecting the radar energy illuminating a terrain cell of sea ice. General techniques for reduction of the scatterometer data to a form suitable for application of ice type decision criteria were investigated, and the electronic circuit requirements for implementation of these techniques were determined. Also, consideration of circuit requirements are extended to include the electronics necessary for analog programming of ice type decision algorithms. After completing the basic circuit designs a laboratory model was constructed and a preliminary evaluation performed. Several system modifications for improved performance are suggested. (Modified author abstract)

Certification of lightning protection for a full-authority digital engine control

NASA Technical Reports Server (NTRS)

Dargi, M.; Rupke, E.; Wiles, K.

1991-01-01

FADEC systems present many challenges to the lightning protection engineer. Verification of the protection-design adequacy for certification purposes presents additional challenges. The basic requirements of the certification plan of a FADEC is to demonstrate compliance with Federal Airworthiness Regulations (FAR) 25.1309 and 25.581. These FARs are intended for transport aircraft, but there are equivalent sections for general aviation aircraft, normal and transport rotorcraft. Military aircraft may have additional requirements. The criteria for demonstration of adequate lightning protection for a FADEC systems include the procedures outlined in FAA Advisory Circular (AC) 20-136, Protection of aircraft electrical/electronic systems against the indirect effects of lightning. As FADEC systems, including the interconnecting wiring, are generally not susceptible to direct attachment of lightning currents, the verification of protection against indirect effects is primarily described.

Phobos-Grunt: Russian sample return mission

NASA Astrophysics Data System (ADS)

Marov, M. Ya.; Avduevsky, V. S.; Akim, E. L.; Eneev, T. M.; Kremnev, R. S.; Kulikov, S. D.; Pichkhadze, K. M.; Popov, G. A.; Rogovsky, G. N.

2004-01-01

As an important milestone in the exploration of Mars and small bodies, a new generation space vehicle ``Phobos-Grunt'' is planned to be launched by the Russian Aviation and Space Agency. The project is optimized around a Phobos sample return mission and follow up missions targeted to study some main asteroid belt bodies, NEOs and short period comets. The principal constraint is use of the ``Soyuz-Fregat'' rather than the ``Proton'' launcher to accomplish these challenging goals. The vehicle design incorporates innovative SEP technology involving electrojet engines that allowed us to increase significantly the mission's energetic capabilities, as well as highly autonomous on-board systems. Basic criteria underlining the ``Phobos-Grunt'' mission scenario, scientific objectives and rationale including Mars observations during the vehicle's insertion into Mars orbit and Phobos approach maneuvers, are discussed and an opportunity for international cooperation is suggested.

Meta-Design and the Triple Learning Organization in Architectural Design Process

NASA Astrophysics Data System (ADS)

Barelkowski, Robert

2017-10-01

The paper delves into the improvement of Meta-Design methodology being the result of implementation of triple learning organization. Grown from the concept of reflective practice, it offers an opportunity to segregate and hierarchize both criteria and knowledge management and at least twofold application. It induces constant feedback loops recharging the basic level of “design” with second level of “learning from design” and third level of “learning from learning”. While learning from design reflects the absorption of knowledge, structuralization of skills, management of information, learning from learning gives deeper understanding and provides axiological perspective which is necessary when combining cultural, social, and abstract conceptual problems. The second level involves multidisciplinary applications imported from many engineering disciplines, technical sciences, but also psychological background, or social environment. The third level confronts these applications with their respective sciences (wide extra-architectural knowledge) and axiological issues. This distinction may be represented in difference between e.g. purposeful, systemic use of participatory design which again generates experience-by-doing versus use of disciplinary knowledge starting from its theoretical framework, then narrowed down to be relevant to particular design task. The paper discusses the application in two cases: awarded competition proposal of Digital Arts Museum in Madrid and BAIRI university building. Both cases summarize the effects of implementation and expose the impact of triple-loop knowledge circles onto design, teaching the architect or helping them to learn how to manage information flows and how to accommodate paradigm shifts in the architectural design process.

Radiographic Measurement of Displacement in Acetabular Fractures: A Systematic Review of the Literature.

PubMed

Dodd, Andrew; Osterhoff, Georg; Guy, Pierre; Lefaivre, Kelly A

2016-06-01

To report methods of measurement of radiographic displacement and radiographic outcomes in acetabular fractures described in the literature. A systematic review of the English literature was performed using EMBASE and Medline in August 2014. Inclusion criteria were studies of operatively treated acetabular fractures in adults with acute (<6 weeks) open reduction and internal fixation that reported radiographic outcomes. Exclusion criteria included case series with <10 patients, fractures managed >6 weeks from injury, acute total hip arthroplasty, periprosthetic fractures, time frame of radiographic outcomes not stated, missing radiographic outcome data, and non-English language articles. Basic information collected included journal, author, year published, number of fractures, and fracture types. Specific data collected included radiographic outcome data, method of measuring radiographic displacement, and methods of interpreting or categorizing radiographic outcomes. The number of reproducible radiographic measurement techniques (2/64) and previously described radiographic interpretation methods (4) were recorded. One radiographic reduction grading criterion (Matta) was used nearly universally in articles that used previously described criteria. Overall, 70% of articles using this criteria documented anatomic reductions. The current standard of measuring radiographic displacement in publications dealing with acetabulum fractures almost universally lacks basic description, making further scientific rigor, such as testing reproducibility, impossible. Further work is necessary to standardize radiographic measurement techniques, test their reproducibility, and qualify their validity or determine which measurements are important to clinical outcomes. Diagnostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Designing Excellence and Quality Model for Training Centers of Primary Health Care: A Delphi Method Study.

PubMed

Tabrizi, Jafar-Sadegh; Farahbakhsh, Mostafa; Shahgoli, Javad; Rahbar, Mohammad Reza; Naghavi-Behzad, Mohammad; Ahadi, Hamid-Reza; Azami-Aghdash, Saber

2015-10-01

Excellence and quality models are comprehensive methods for improving the quality of healthcare. The aim of this study was to design excellence and quality model for training centers of primary health care using Delphi method. In this study, Delphi method was used. First, comprehensive information were collected using literature review. In extracted references, 39 models were identified from 34 countries and related sub-criteria and standards were extracted from 34 models (from primary 39 models). Then primary pattern including 8 criteria, 55 sub-criteria, and 236 standards was developed as a Delphi questionnaire and evaluated in four stages by 9 specialists of health care system in Tabriz and 50 specialists from all around the country. Designed primary model (8 criteria, 55 sub-criteria, and 236 standards) were concluded with 8 criteria, 45 sub-criteria, and 192 standards after 4 stages of evaluations by specialists. Major criteria of the model are leadership, strategic and operational planning, resource management, information analysis, human resources management, process management, costumer results, and functional results, where the top score was assigned as 1000 by specialists. Functional results had the maximum score of 195 whereas planning had the minimum score of 60. Furthermore the most and the least sub-criteria was for leadership with 10 sub-criteria and strategic planning with 3 sub-criteria, respectively. The model that introduced in this research has been designed following 34 reference models of the world. This model could provide a proper frame for managers of health system in improving quality.

Interior moisture design loads for residences

Treesearch

Anton TenWolde; Iain S. Walker

2001-01-01

This paper outlines a methodology to obtain design values for indoor boundary conditions for moisture design calculations for residences. This is part of a larger effort by ASHRAE Standard Project Committee 160P, Design Criteria for Moisture Control in Buildings, to formulate criteria for moisture design loads, analysis techniques, and material and building performance...

Technical Criteria and Procedures for Evaluating the Crashworthiness and Occupant Protection Performance of Alternatively Designed Passenger Rail Equipment for Use in Tier I Service

DOT National Transportation Integrated Search

2011-10-01

Criteria and procedures have been developed for assessing crashworthiness and occupant protection performance of alternatively designed trainsets to be used in Tier I (not exceeding 125 mph) passenger service. These criteria and procedures take advan...

77 FR 38857 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Normal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

... Treatment, Heating Ventilation and Air Conditioning Systems.'' This new standard provides comprehensive test... Criteria for Air Filtration and Adsorption Units of Normal Atmosphere Cleanup Systems in Light-Water-Cooled... NUCLEAR REGULATORY COMMISSION [NRC-2012-0152] Design, Inspection, and Testing Criteria for Air...

Using KIE To Help Students Develop Shared Criteria for House Designs.

ERIC Educational Resources Information Center

Cuthbert, Alex; Hoadley, Christopher M.

How can students develop shared criteria for problems that have no "right" answer? Ill-structured problems of this sort are called design problems. Like portfolio projects, these problems are difficult to evaluate for both teachers and students. This investigation contrasts two methods for developing shared criteria for project…

Advances in Residential Design Related to the Influence of Geomagnetism.

PubMed

Glaria, Francisco; Arnedo, Israel; Sánchez-Ostiz, Ana

2018-02-23

Since the origin of the Modern Movement, there has been a basic commitment to improving housing conditions and the well-being of occupants, especially given the prediction that 2/3 of humanity will reside in cities by 2050. Moreover, a compact model of the city with tall buildings and urban densification at this scale will be generated. Continuous constructive and technological advances have developed solid foundations on safety, energy efficiency, habitability, and sustainability in housing design. However, studies on improving the quality of life in these areas continue to be a challenge for architects and engineers. This paper seeks to contribute health-related information to the study of residential design, specifically the influence of the geomagnetic field on its occupants. After compiling information on the effects of geomagnetic fields from different medical studies over 23 years, a case study of a 16-story high-rise building is presented, with the goal of proposing architectural design recommendations for long-term occupation in the same place. The purpose of the present work is three-fold: first, to characterize the geomagnetic field variability of buildings; second, to identify the causes and possible related mechanisms; and third, to define architectural criteria on the arrangement of uses and constructive elements for housing.

Advances in Residential Design Related to the Influence of Geomagnetism

PubMed Central

Arnedo, Israel; Sánchez-Ostiz, Ana

2018-01-01

Since the origin of the Modern Movement, there has been a basic commitment to improving housing conditions and the well-being of occupants, especially given the prediction that 2/3 of humanity will reside in cities by 2050. Moreover, a compact model of the city with tall buildings and urban densification at this scale will be generated. Continuous constructive and technological advances have developed solid foundations on safety, energy efficiency, habitability, and sustainability in housing design. However, studies on improving the quality of life in these areas continue to be a challenge for architects and engineers. This paper seeks to contribute health-related information to the study of residential design, specifically the influence of the geomagnetic field on its occupants. After compiling information on the effects of geomagnetic fields from different medical studies over 23 years, a case study of a 16-story high-rise building is presented, with the goal of proposing architectural design recommendations for long-term occupation in the same place. The purpose of the present work is three-fold: first, to characterize the geomagnetic field variability of buildings; second, to identify the causes and possible related mechanisms; and third, to define architectural criteria on the arrangement of uses and constructive elements for housing. PMID:29473902

41 CFR 102-76.10 - What basic design and construction policy governs Federal agencies?

Code of Federal Regulations, 2012 CFR

2012-01-01

... basic design and construction policies: (a) Provide the highest quality services for designing and... requirements. (See 40 U.S.C. 3310 and 3312.) (d) Design Federal buildings to have a long life expectancy and...

41 CFR 102-76.10 - What basic design and construction policy governs Federal agencies?

Code of Federal Regulations, 2013 CFR

2013-07-01

... basic design and construction policies: (a) Provide the highest quality services for designing and... requirements. (See 40 U.S.C. 3310 and 3312.) (d) Design Federal buildings to have a long life expectancy and...

7 CFR 1709.123 - Evaluation criteria and weights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design and technical merit criteria shall not be less than 65 percent of the total available points, and... announcement. (b) Project design and technical merit. In reviewing the grant proposal's project design and... the proposed design, construction, equipment and materials for the proposed energy facilities to...

Malnutrition in postacute geriatric care: Basic ESPEN diagnosis and etiology based diagnoses analyzed by length of stay, in-hospital mortality, and functional rehabilitation indexes.

PubMed

Sánchez-Rodríguez, Dolores; Marco, Ester; Annweiler, Cédric; Ronquillo-Moreno, Natalia; Tortosa, Andrea; Vázquez-Ibar, Olga; Escalada, Ferran; Duran, Xavier; Muniesa, Josep M

2017-11-01

To determine the relationships between malnutrition and nutrition-related conditions according to the European Society of Clinical Nutrition and Metabolism (ESPEN) consensus and guidelines and clinical outcomes in postacute rehabilitation. Of 102 eligible inpatients, 95 (84.5 years old, 63.2% women) fulfilled inclusion criteria: aged ≥70 years, body mass index <30kg/m 2 , admission for rehabilitation. Mini-Nutritional Assessment-Short Form (MNA-SF≤11) identified patients "at risk" and ESPEN basic and etiology based definitions were applied. Nutrition-related conditions (sarcopenia, frailty, overweight/obesity, micronutrient abnormalities) were determined. We assessed the relationship between these conditions and the clinical and rehabilitation outcomes (relative functional gain, rehabilitation efficiency) during hospitalization. All patients were "at risk" by MNA-SF criteria and 31 reported unintentional weight loss >5% in the last year or 2-3kg in the last 6 months. Nineteen fulfilled the ESPEN basic definition, of which 10 had disease-related malnutrition with inflammation and 9 without inflammation, and 20 had cachexia. Sarcopenia (n=44), frailty (n=94), overweight/obesity (n=59), and micronutrient abnormalities (n=70) were frequent. Unintentional weight loss impaired all functional outcomes and increased length of stay [OR=6.04 (2.87-9.22); p<0.001]. In multivariate analysis, relationships between rehabilitation impact indices and the ESPEN basic and etiology-based definitions observed in univariate analysis persisted only (and marginally) for relative functional gain [OR=13.24 (0.96-181.95); p=0.005]. Infrequent in-hospital mortality prevented meaningful analysis of this outcome. ESPEN basic and etiology-based definitions and nutrition related disorders were determined in postacute care. Malnutrition was associated with poor rehabilitation outcomes, mainly due to unintentional weight loss. Copyright © 2017 Elsevier B.V. All rights reserved.

Design criteria monograph for pressurized metal cases

NASA Technical Reports Server (NTRS)

1972-01-01

Organiation and presentation of data pertaining to design of solid propellant rocket engine cases are discussed. Design criteria are presented in form of monograph based on accumulated experience and knowledge. Improvements in reliability, cost effectiveness, and engine efficiency are stressed.

77 FR 29317 - Fiscal Year 2012 Draft Work Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

..., the Commission determines its own basic operating principles and funding criteria on an annual federal fiscal year (October 1 to September 30) basis. The Commission outlines these priorities and funding... 2012 Appropriations Summary The Denali Commission has historically received several federal funding...

10 CFR 1045.15 - Classification and declassification presumptions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... criteria in § 1045.16 indicates otherwise: (1) Basic science: mathematics, chemistry, theoretical and experimental physics, engineering, materials science, biology and medicine; (2) Magnetic confinement fusion...); (5) Fact of use of safety features (e.g., insensitive high explosives, fire resistant pits) to lower...

10 CFR 1045.15 - Classification and declassification presumptions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... criteria in § 1045.16 indicates otherwise: (1) Basic science: mathematics, chemistry, theoretical and experimental physics, engineering, materials science, biology and medicine; (2) Magnetic confinement fusion...); (5) Fact of use of safety features (e.g., insensitive high explosives, fire resistant pits) to lower...

An epidemiological examination of the subluxation construct using Hill's criteria of causation.

PubMed

Mirtz, Timothy A; Morgan, Lon; Wyatt, Lawrence H; Greene, Leon

2009-12-02

Chiropractors claim to locate, analyze and diagnose a putative spinal lesion known as subluxation and apply the mode of spinal manipulation (adjustment) for the correction of this lesion. The purpose of this examination is to review the current evidence on the epidemiology of the subluxation construct and to evaluate the subluxation by applying epidemiologic criteria for it's significance as a causal factor. The databases of PubMed, Cinahl, and Mantis were searched for studies using the keywords subluxation, epidemiology, manipulation, dose-response, temporality, odds ratio, relative risk, biological plausibility, coherence, and analogy. The criteria for causation in epidemiology are strength (strength of association), consistency, specificity, temporality (temporal sequence), dose response, experimental evidence, biological plausibility, coherence, and analogy. Applied to the subluxation all of these criteria remain for the most part unfulfilled. There is a significant lack of evidence to fulfill the basic criteria of causation. This lack of crucial supportive epidemiologic evidence prohibits the accurate promulgation of the chiropractic subluxation.

An epidemiological examination of the subluxation construct using Hill's criteria of causation

PubMed Central

2009-01-01

Background Chiropractors claim to locate, analyze and diagnose a putative spinal lesion known as subluxation and apply the mode of spinal manipulation (adjustment) for the correction of this lesion. Aim The purpose of this examination is to review the current evidence on the epidemiology of the subluxation construct and to evaluate the subluxation by applying epidemiologic criteria for it's significance as a causal factor. Methods The databases of PubMed, Cinahl, and Mantis were searched for studies using the keywords subluxation, epidemiology, manipulation, dose-response, temporality, odds ratio, relative risk, biological plausibility, coherence, and analogy. Results The criteria for causation in epidemiology are strength (strength of association), consistency, specificity, temporality (temporal sequence), dose response, experimental evidence, biological plausibility, coherence, and analogy. Applied to the subluxation all of these criteria remain for the most part unfulfilled. Conclusion There is a significant lack of evidence to fulfill the basic criteria of causation. This lack of crucial supportive epidemiologic evidence prohibits the accurate promulgation of the chiropractic subluxation. PMID:19954544

Closed set of the uniqueness conditions and bifurcation criteria in generalized coupled thermoplasticity for small deformations

NASA Astrophysics Data System (ADS)

Śloderbach, Zdzisław

2016-05-01

This paper reports the results of a study into global and local conditions of uniqueness and the criteria excluding the possibility of bifurcation of the equilibrium state for small strains. The conditions and criteria are derived on the basis of an analysis of the problem of uniqueness of a solution involving the basic incremental boundary problem of coupled generalized thermo-elasto-plasticity. This work forms a follow-up of previous research (Śloderbach in Bifurcations criteria for equilibrium states in generalized thermoplasticity, IFTR Reports, 1980, Arch Mech 3(35):337-349, 351-367, 1983), but contains a new derivation of global and local criteria excluding a possibility of bifurcation of an equilibrium state regarding a comparison body dependent on the admissible fields of stress rate. The thermal elasto-plastic coupling effects, non-associated laws of plastic flow and influence of plastic strains on thermoplastic properties of a body were taken into account in this work. Thus, the mathematical problem considered here is not a self-conjugated problem.

Evaluation Criteria for Nursing Student Application of Evidence-Based Practice: A Delphi Study.

PubMed

Bostwick, Lina; Linden, Lois

2016-06-01

Core clinical evaluation criteria do not exist for measuring prelicensure baccalaureate nursing students' application of evidence-based practice (EBP) during direct care assignments. The study objective was to achieve consensus among EBP nursing experts to create clinical criteria for faculty to use in evaluating students' application of EBP principles. A three-round Delphi method was used. Experts were invited to participate in Web-based surveys. Data were analyzed using qualitative coding and categorizing. Quantitative analyses were descriptive calculations for rating and ranking. Expert consensus occurred in the Delphi rounds. The study provides a set of 10 core clinical evaluation criteria for faculty evaluating students' progression toward competency in their application of EBP. A baccalaureate program curriculum requiring the use of Bostwick's EBP Core Clinical Evaluation Criteria will provide a clear definition for understanding basic core EBP competence as expected for the assessment of student learning. [J Nurs Educ. 2016;55(5):336-341.]. Copyright 2016, SLACK Incorporated.

Good Design is Good Social Change: Envisioning an Age of Accountability in Communication Design Education

ERIC Educational Resources Information Center

Bennett, Audrey

2012-01-01

Using typography as its exemplar with its lack of clear performance criteria, this article questions what is good design and how to measure a designer's accountability. Evaluation criteria are teased out from various perspectives: credibility, ease of use, stakeholder inclusion in the design process, respect for cultural dimensions and whether it…

[Allocating resources for cancer control--resolving multicriteria decision-making using the analytic hierarchy process].

PubMed

Gróf, Agnes

2007-01-01

When competing programs ought to be financed simultaneously for the same purpose, an allocation problem occurs due to scarce resources, and different perspectives and preferences. Facing the problem needs determining criteria which the decision might be based on. Those criteria form the objectives (the scope) of the different participants, and are relevant for the achievement of the goal, providing a comprehensive resource allocation that bridges and integrates the different perspectives. In case of cancer control primary prevention, secondary prevention, therapy and tertiary prevention, education, basic sciences, and clinical trials form the alternatives. An analytic hierarchy process (AHP) is used for supporting decision-making in the resource allocation problem. AHP is a method for setting priorities, but can only work out the implications of what was declared through the pairwise-ranking process, namely the relative preferences, weighing the criteria and rating the alternatives two by two. In the first analysis the relative weights to criteria were 0.099 for 'distributive justice'; 0.120 for constitutional and human rights; 0.251 for lay opinion; 0.393 for EBM; 0.137 for cost-effectiveness. Ranking the alternatives using 'judgements' resulted in relative preference of 0.238 for therapy, 0.204 for primary prevention, 0.201 for secondary prevention, 0.135 for clinical trials, 0.111 for tertiary prevention, 0.066 for basic sciences and 0.045 for education. In the second analysis the relative importance of "cost-effectiveness" was doubled, thus resulting in 0.234 for therapy, 0.216 for secondary prevention, 0.183 for primary prevention, 0.145 for clinical trials, 0.113 for tertiary prevention, 0.063 for basic sciences and 0.046 for education. Sensitivity analysis has shown that increasing the relative weight of cost-effectiveness up to approximately 0.4 changes the rank of alternatives, and above 0.4 this criterion gives secondary prevention preferences. According to the relative rates computed in both of the models all criteria vote for therapy, but these preferences change at the high level of weights, in case of EBM, 'rights', and cost-effectiveness. Cost-effectiveness prefers secondary prevention to therapy; the criterion of constitutional and human rights and the criterion of evidence-based medicine vote for primary prevention.

The Brazilian Portuguese Lexicon: An Instrument for Psycholinguistic Research

PubMed Central

Estivalet, Gustavo L.; Meunier, Fanny

2015-01-01

In this article, we present the Brazilian Portuguese Lexicon, a new word-based corpus for psycholinguistic and computational linguistic research in Brazilian Portuguese. We describe the corpus development, the specific characteristics on the internet site and database for user access. We also perform distributional analyses of the corpus and comparisons to other current databases. Our main objective was to provide a large, reliable, and useful word-based corpus with a dynamic, easy-to-use, and intuitive interface with free internet access for word and word-criteria searches. We used the Núcleo Interinstitucional de Linguística Computacional’s corpus as the basic data source and developed the Brazilian Portuguese Lexicon by deriving and adding metalinguistic and psycholinguistic information about Brazilian Portuguese words. We obtained a final corpus with more than 30 million word tokens, 215 thousand word types and 25 categories of information about each word. This corpus was made available on the internet via a free-access site with two search engines: a simple search and a complex search. The simple engine basically searches for a list of words, while the complex engine accepts all types of criteria in the corpus categories. The output result presents all entries found in the corpus with the criteria specified in the input search and can be downloaded as a.csv file. We created a module in the results that delivers basic statistics about each search. The Brazilian Portuguese Lexicon also provides a pseudoword engine and specific tools for linguistic and statistical analysis. Therefore, the Brazilian Portuguese Lexicon is a convenient instrument for stimulus search, selection, control, and manipulation in psycholinguistic experiments, as also it is a powerful database for computational linguistics research and language modeling related to lexicon distribution, functioning, and behavior. PMID:26630138

The Brazilian Portuguese Lexicon: An Instrument for Psycholinguistic Research.

PubMed

Estivalet, Gustavo L; Meunier, Fanny

2015-01-01

In this article, we present the Brazilian Portuguese Lexicon, a new word-based corpus for psycholinguistic and computational linguistic research in Brazilian Portuguese. We describe the corpus development, the specific characteristics on the internet site and database for user access. We also perform distributional analyses of the corpus and comparisons to other current databases. Our main objective was to provide a large, reliable, and useful word-based corpus with a dynamic, easy-to-use, and intuitive interface with free internet access for word and word-criteria searches. We used the Núcleo Interinstitucional de Linguística Computacional's corpus as the basic data source and developed the Brazilian Portuguese Lexicon by deriving and adding metalinguistic and psycholinguistic information about Brazilian Portuguese words. We obtained a final corpus with more than 30 million word tokens, 215 thousand word types and 25 categories of information about each word. This corpus was made available on the internet via a free-access site with two search engines: a simple search and a complex search. The simple engine basically searches for a list of words, while the complex engine accepts all types of criteria in the corpus categories. The output result presents all entries found in the corpus with the criteria specified in the input search and can be downloaded as a.csv file. We created a module in the results that delivers basic statistics about each search. The Brazilian Portuguese Lexicon also provides a pseudoword engine and specific tools for linguistic and statistical analysis. Therefore, the Brazilian Portuguese Lexicon is a convenient instrument for stimulus search, selection, control, and manipulation in psycholinguistic experiments, as also it is a powerful database for computational linguistics research and language modeling related to lexicon distribution, functioning, and behavior.

Facial Emotion Recognition Performance Differentiates Between Behavioral Variant Frontotemporal Dementia and Major Depressive Disorder.

PubMed

Chiu, Isabelle; Piguet, Olivier; Diehl-Schmid, Janine; Riedl, Lina; Beck, Johannes; Leyhe, Thomas; Holsboer-Trachsler, Edith; Kressig, Reto W; Berres, Manfred; Monsch, Andreas U; Sollberger, Marc

Misdiagnosis of early behavioral variant frontotemporal dementia (bvFTD) with major depressive disorder (MDD) is not uncommon due to overlapping symptoms. The aim of this study was to improve the discrimination between these disorders using a novel facial emotion perception task. In this prospective cohort study (July 2013-March 2016), we compared 25 patients meeting Rascovsky diagnostic criteria for bvFTD, 20 patients meeting DSM-IV criteria for MDD, 21 patients meeting McKhann diagnostic criteria for Alzheimer's disease dementia, and 31 healthy participants on a novel emotion intensity rating task comprising morphed low-intensity facial stimuli. Participants were asked to rate the intensity of morphed faces on the congruent basic emotion (eg, rating on sadness when sad face is shown) and on the 5 incongruent basic emotions (eg, rating on each of the other basic emotions when sad face is shown). While bvFTD patients underrated congruent emotions (P < .01), they also overrated incongruent emotions (P < .001), resulting in confusion of facial emotions. In contrast, MDD patients overrated congruent negative facial emotions (P < .001), but not incongruent facial emotions. Accordingly, ratings of congruent and incongruent emotions highly discriminated between bvFTD and MDD patients, ranging from area under the curve (AUC) = 93% to AUC = 98%. Further, an almost complete discrimination (AUC = 99%) was achieved by contrasting the 2 rating types. In contrast, Alzheimer's disease dementia patients perceived emotions similarly to healthy participants, indicating no impact of cognitive impairment on rating scores. Our congruent and incongruent facial emotion intensity rating task allows a detailed assessment of facial emotion perception in patient populations. By using this simple task, we achieved an almost complete discrimination between bvFTD and MDD, potentially helping improve the diagnostic certainty in early bvFTD. © Copyright 2018 Physicians Postgraduate Press, Inc.

Bipolar Pathophysiology and Development of Improved Treatments

PubMed Central

Bowden, Charles L.

2013-01-01

The purpose of this review is to provide strategies and their rationale which can facilitate scientifically productive investigations into genetic, neuronal, brain functional and clinical aspects of bipolar disorder. The presentation addresses both factors that have impeded and those that have facilitated landmark advances on the pathophysiology and treatment of bipolar disorders. Application of the strategies can provide a scientific platform that may be useful to basic and clinical scientists for the purposes of achieving seminal advances in understanding pathophysiology, including inherited and experience based contributors to disease expression. Current diagnostic criteria omit certain key symptoms, do not include illness course or family history and lack specification of the importance of fundamental symptomatology. Consideration of such factors in inclusion and exclusion criteria, and in assessment instruments in basic and clinical studies, serves to strengthen the capability of a research plan to test key hypotheses regarding moderating and mediating factors of this complex illness. For example, most studies of brain structure and function and of new interventions have selected subjects on the basis of traditional full syndromal criteria. Evidence indicates that additional consideration of principal behavioral domains of bipolar symptomatology, e.g., anxiety, psychosis, impulsivity, elevated psychomotor and cognitive processing speed, rather than strictly depressive or manic syndromes can provide more homogeneous samples for study, and increase the focus of experimental hypotheses. PMID:18582440

Problems and criteria of quality improvement in end face mechanical seal rings through technological methods

NASA Astrophysics Data System (ADS)

Tarelnik, V.; Belous, A.; Antoszewski, B.; Zukov, A.

2017-08-01

In this paper are presented the recommendations for material’s selections of the mechanical seals rings and basic productive and operating requirements. The system of a directional selection of technology that ensures the required quality of working surfaces of the mechanical seals rings covers their entire life cycle. The mathematical frictional model is proposed as an instrument for calculating a linear and weighing abrasion of the mechanical seals rings and helps to improve selection’s criteria and the most rational method of strengthening.

Evaluation criteria for the district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W; Odero, Wilson W O

2005-03-01

The District Health Management Information Systems (DHMISs) were established by the Ministry of Health (MoH) in Kenya more than two decades ago. Since then, no comprehensive evaluation has been undertaken. This can partly be attributed to lack of defined criteria for evaluating them. To propose evaluation criteria for assessing the design, implementation and impact of DHMIS in the management of the District Health System (DHS) in Kenya. A descriptive cross-sectional study conducted in three DHSs in Kenya: Bungoma, Murang'a and Uasin Gishu districts. Data was collected through focus group discussions, key informant interviews, and documents' review. The respondents, purposely selected from the Ministry of Health headquarters and the three DHS districts, included designers, managers and end-users of the systems. A set of evaluation criteria for DHMISs was identified for each of the three phases of implementation: pre-implementation evaluation criteria (categorised as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; concurrent implementation evaluation criteria to be applied during implementation of the new system; and post-implementation evaluation criteria (classified as internal - quality of information; external - resources and managerial support; ultimate - systems impact) to be applied after implementation of the system for at least three years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to it; concurrent (operational) - implementation evaluation criteria should be used to monitor the process; and post-implementation evaluation criteria should be applied to assess the system's effectiveness.

Online Lectures in Undergraduate Medical Education: Scoping Review.

PubMed

Tang, Brandon; Coret, Alon; Qureshi, Aatif; Barron, Henry; Ayala, Ana Patricia; Law, Marcus

2018-04-10

The adoption of the flipped classroom in undergraduate medical education calls on students to learn from various self-paced tools-including online lectures-before attending in-class sessions. Hence, the design of online lectures merits special attention, given that applying multimedia design principles has been shown to enhance learning outcomes. The aim of this study was to understand how online lectures have been integrated into medical school curricula, and whether published literature employs well-accepted principles of multimedia design. This scoping review followed the methodology outlined by Arksey and O'Malley (2005). Databases, including MEDLINE, PsycINFO, Education Source, FRANCIS, ERIC, and ProQuest, were searched to find articles from 2006 to 2016 related to online lecture use in undergraduate medical education. In total, 45 articles met our inclusion criteria. Online lectures were used in preclinical and clinical years, covering basic sciences, clinical medicine, and clinical skills. The use of multimedia design principles was seldom reported. Almost all studies described high student satisfaction and improvement on knowledge tests following online lecture use. Integration of online lectures into undergraduate medical education is well-received by students and appears to improve learning outcomes. Future studies should apply established multimedia design principles to the development of online lectures to maximize their educational potential. ©Brandon Tang, Alon Coret, Aatif Qureshi, Henry Barron, Ana Patricia Ayala, Marcus Law. Originally published in JMIR Medical Education (http://mededu.jmir.org), 10.04.2018.

Assessment of shrimp farming impact on groundwater quality using analytical hierarchy process

NASA Astrophysics Data System (ADS)

Anggie, Bernadietta; Subiyanto, Arief, Ulfah Mediaty; Djuniadi

2018-03-01

Improved shrimp farming affects the groundwater quality conditions. Assessment of shrimp farming impact on groundwater quality conventionally has less accuracy. This paper presents the implementation of Analytical Hierarchy Process (AHP) method for assessing shrimp farming impact on groundwater quality. The data used is the impact data of shrimp farming in one of the regions in Indonesia from 2006-2016. Criteria used in this study were 8 criteria and divided into 49 sub-criteria. The weighting by AHP performed to determine the importance level of criteria and sub-criteria. Final priority class of shrimp farming impact were obtained from the calculation of criteria's and sub-criteria's weights. The validation was done by comparing priority class of shrimp farming impact and water quality conditions. The result show that 50% of the total area was moderate priority class, 37% was low priority class and 13% was high priority class. From the validation result impact assessment for shrimp farming has been high accuracy to the groundwater quality conditions. This study shows that assessment based on AHP has a higher accuracy to shrimp farming impact and can be used as the basic fisheries planning to deal with impacts that have been generated.

Implementation and Evaluation of Microcomputer Systems for the Republic of Turkey’s Naval Ships.

DTIC Science & Technology

1986-03-01

important database design tool for both logical and physical database design, such as flowcharts or pseudocodes are used for program design. Logical...string manipulation in FORTRAN is difficult but not impossible. BASIC ( Beginners All-Purpose Symbolic Instruction Code): Basic is currently the most...63 APPENDIX B GLOSSARY/ACRONYM LIST AC Alternating Current AP Application Program BASIC Beginners All-purpose Symbolic Instruction Code CCP

Summary of the Advanced Reactor Design Criteria (ARDC) Phase 2 Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holbrook, Mark Raymond

This report provides an end-of-year summary reflecting the progress and status of proposed regulatory design criteria for advanced non-LWR designs in accordance with the Level 3 milestone in M3AT-15IN2001017 in work package AT-15IN200101. These criteria have been designated as ARDC, and they provide guidance to future applicants for addressing the GDC that are currently applied specifically to LWR designs. The report provides a summary of Phase 2 activities related to the various tasks associated with ARDC development and the subsequent development of example adaptations of ARDC for Sodium Fast Reactor (SFR) and modular High Temperature Gas-cooled Reactor (HTGR) designs.

A Concept Transformation Learning Model for Architectural Design Learning Process

ERIC Educational Resources Information Center

Wu, Yun-Wu; Weng, Kuo-Hua; Young, Li-Ming

2016-01-01

Generally, in the foundation course of architectural design, much emphasis is placed on teaching of the basic design skills without focusing on teaching students to apply the basic design concepts in their architectural designs or promoting students' own creativity. Therefore, this study aims to propose a concept transformation learning model to…

Checking the predictive accuracy of basic symptoms against ultra high-risk criteria and testing of a multivariable prediction model: Evidence from a prospective three-year observational study of persons at clinical high-risk for psychosis.

PubMed

Hengartner, M P; Heekeren, K; Dvorsky, D; Walitza, S; Rössler, W; Theodoridou, A

2017-09-01

The aim of this study was to critically examine the prognostic validity of various clinical high-risk (CHR) criteria alone and in combination with additional clinical characteristics. A total of 188 CHR positive persons from the region of Zurich, Switzerland (mean age 20.5 years; 60.2% male), meeting ultra high-risk (UHR) and/or basic symptoms (BS) criteria, were followed over three years. The test battery included the Structured Interview for Prodromal Syndromes (SIPS), verbal IQ and many other screening tools. Conversion to psychosis was defined according to ICD-10 criteria for schizophrenia (F20) or brief psychotic disorder (F23). Altogether n=24 persons developed manifest psychosis within three years and according to Kaplan-Meier survival analysis, the projected conversion rate was 17.5%. The predictive accuracy of UHR was statistically significant but poor (area under the curve [AUC]=0.65, P<.05), whereas BS did not predict psychosis beyond mere chance (AUC=0.52, P=.730). Sensitivity and specificity were 0.83 and 0.47 for UHR, and 0.96 and 0.09 for BS. UHR plus BS achieved an AUC=0.66, with sensitivity and specificity of 0.75 and 0.56. In comparison, baseline antipsychotic medication yielded a predictive accuracy of AUC=0.62 (sensitivity=0.42; specificity=0.82). A multivariable prediction model comprising continuous measures of positive symptoms and verbal IQ achieved a substantially improved prognostic accuracy (AUC=0.85; sensitivity=0.86; specificity=0.85; positive predictive value=0.54; negative predictive value=0.97). We showed that BS have no predictive accuracy beyond chance, while UHR criteria poorly predict conversion to psychosis. Combining BS with UHR criteria did not improve the predictive accuracy of UHR alone. In contrast, dimensional measures of both positive symptoms and verbal IQ showed excellent prognostic validity. A critical re-thinking of binary at-risk criteria is necessary in order to improve the prognosis of psychotic disorders. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Photovoltaic system criteria documents. Volume 4: Review criteria for photovoltaic applications

NASA Technical Reports Server (NTRS)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

Guidelines are provided for the organization, preparation and conduct of program reviews for photovoltaic applications. These criteria apply to all photovoltaic applications. They include, but are not limited to, the following: (1) Conceptual design review; (2) Preliminary design review; (3) Critical design review; and (4) Operational readiness review. Contract goal's and objectives are met through program monitoring for cost, schedule, and performance for both managerial and technical elements for all PV applications activities.

Design criteria for payload workstation accommodations

NASA Technical Reports Server (NTRS)

Watters, H. H.; Stokes, J. W.

1975-01-01

Anticipated shuttle sortie payload man-system design criteria needs are investigated. Man-system interactions for the scientific disciplines are listed and the extent is assessed to which documented Skylab experience is expected to provide system design guidance for each of the identified interactions. Where the analysis revealed that the reduced Skylab data does not answer the anticipated needs candidate criteria, based on unreduced Skylab data, available prior research, original analysis, or related requirements derived from previous space programs, are provided.

Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This DOE standard gives design and evaluation criteria for natural phenomena hazards (NPH) effects as guidance for implementing the NPH mitigation requirements of DOE 5480.28. Goal of the criteria is to assure that DOE facilities can withstand the effects of earthquakes, extreme winds, tornadoes, flooding, etc. They apply to the design of new facilities and the evaluation of existing facilities; they may also be used for modification and upgrading of the latter.

[Patient-related color preference and color design in the hospital].

PubMed

Schuschke, G; Christiansen, H

1994-06-01

Colour-physiological studies involving volunteers and colour-psychological interviewing of patients with varied diagnoses revealed that, currently, no compelling scientific reasons can be given for coloration in the hospital. Interviewing 68 patients from a number of clinics on the coloration of sick-rooms yielded the following preferred colours, irrespective of the patients' classing into groups by various criteria: Light colours were consistently preferred for all objects such as ceiling, walls, floor, curtains, furniture, and bed linen. It should be emphasized that even white was a desirable colour for ceilings and bed linen. Beige was found to rank first for walls, floors, curtains, and furniture, whereas the colours of wood and grey shared the second rank for floors and furniture. Green and pink ranked second for bed linen. White and green ranked second for walls and curtains, respectively. In view of the heterogeneity, the findings may not be converted into an absolute just as the recommendations by other workers. Still, the patients' wish should be given priority over decreed recommendations by experts when basic considerations of illumination (reflectance!) are allowed for in the particular overall colour design project.

System configuration management plan for 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vargo, G.F. Jr.

1994-10-11

The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management. The C-M model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOE Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phasesmore » of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life-cycle of the 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System.« less

Paranoia.Ada: Sample output reports

NASA Technical Reports Server (NTRS)

1986-01-01

Paranoia.Ada is a program to diagnose floating point arithmetic in the context of the Ada programming language. The program evaluates the quality of a floating point arithmetic implementation with respect to the proposed IEEE Standards P754 and P854. Paranoia.Ada is derived from the original BASIC programming language version of Paranoia. The Paranoia.Ada replicates in Ada the test algorithms originally implemented in BASIC and adheres to the evaluation criteria established by W. M. Kahan. Paranoia.Ada incorporates a major structural redesign and employs applicable Ada architectural and stylistic features.

Through the looking glass: Basics and principles of reflectance confocal microscopy.

PubMed

Que, Syril Keena T; Fraga-Braghiroli, Naiara; Grant-Kels, Jane M; Rabinovitz, Harold S; Oliviero, Margaret; Scope, Alon

2015-08-01

Reflectance confocal microscopy (RCM) offers high-resolution, noninvasive skin imaging and can help avoid obtaining unnecessary biopsy specimens. It can also increase efficiency in the surgical setting by helping to delineate tumor margins. Diagnostic criteria and several RCM algorithms have been published for the differentiation of benign and malignant neoplasms. We provide an overview of the basic principles of RCM, characteristic RCM features of normal skin and cutaneous neoplasms, and the limitations and future directions of RCM. Copyright © 2015 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

E-Basics: Online Basic Training in Program Evaluation

ERIC Educational Resources Information Center

Silliman, Ben

2016-01-01

E-Basics is an online training in program evaluation concepts and skills designed for youth development professionals, especially those working in nonformal science education. Ten hours of online training in seven modules is designed to prepare participants for mentoring and applied practice, mastery, and/or team leadership in program evaluation.…

Earthquake design criteria for small hydro projects in the Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, P.P.; McCandless, D.H.; Asce, M.

1995-12-31

The definition of the seismic environment and seismic design criteria of more than twenty small hydro projects in the northern part of the island of Luzon in the Philippines took a special urgency on the wake of the Magnitude 7.7 earthquake that shook the island on July 17, 1990. The paper describes the approach followed to determine design shaking level criteria at each hydro site consistent with the seismic environment estimated at that same site. The approach consisted of three steps: (1) Seismicity: understanding the mechanisms and tectonic features susceptible to generate seismicity and estimating the associated seismicity levels, (2)more » Seismic Hazard: in the absence of an accurate historical record, using statistics to determine the expected level of ground shaking at a site during the operational 100-year design life of each Project, and (3) Criteria Selection: finally and most importantly, exercising judgment in estimating the final proposed level of shaking at each site. The resulting characteristics of estimated seismicity and seismic hazard and the proposed final earthquake design criteria are provided.« less

10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...

10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...

10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...

10 CFR 70.64 - Requirements for new facilities or new processes at existing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... behavior of items relied on for safety. (b) Facility and system design and facility layout must be based on... existing facilities. (a) Baseline design criteria. Each prospective applicant or licensee shall address the following baseline design criteria in the design of new facilities. Each existing licensee shall address the...

25 CFR 36.10 - Standard I-Philosophy and goals.

Code of Federal Regulations, 2010 CFR

2010-04-01

... philosophy and goals shall be developed with the involvement of students, parents, lay citizens, school staff... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Educational Management...

25 CFR 36.93 - Is a homeliving handbook required?

Code of Federal Regulations, 2011 CFR

2011-04-01

... parents or guardians with a current and updated copy of student rights and responsibilities; (c) Conduct an orientation for all students on the handbook and student rights and responsibilities; and (d... BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs...

25 CFR 36.93 - Is a homeliving handbook required?

Code of Federal Regulations, 2012 CFR

2012-04-01

... parents or guardians with a current and updated copy of student rights and responsibilities; (c) Conduct an orientation for all students on the handbook and student rights and responsibilities; and (d... BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs...

25 CFR 36.93 - Is a homeliving handbook required?

Code of Federal Regulations, 2013 CFR

2013-04-01

... parents or guardians with a current and updated copy of student rights and responsibilities; (c) Conduct an orientation for all students on the handbook and student rights and responsibilities; and (d... BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs...

25 CFR 36.93 - Is a homeliving handbook required?

Code of Federal Regulations, 2010 CFR

2010-04-01

... parents or guardians with a current and updated copy of student rights and responsibilities; (c) Conduct an orientation for all students on the handbook and student rights and responsibilities; and (d... BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Homeliving Programs...