Code of Federal Regulations, 2010 CFR
2010-04-01
... fuel alcohol for testing and analysis. Samples of spirits may not be removed from the premises of the alcohol fuel plant. Samples of fuel alcohol may be removed from the premises of the alcohol fuel plant to... that the spirits or fuel alcohol contained therein is a sample. The proprietor shall account for...
27 CFR 19.990 - Redistillation of spirits or fuel alcohol received on the plant premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... or fuel alcohol received on the plant premises. 19.990 Section 19.990 Alcohol, Tobacco Products and... PLANTS Distilled Spirits For Fuel Use Redistillation § 19.990 Redistillation of spirits or fuel alcohol received on the plant premises. (a) Receipts for redistillation. Proprietors of alcohol fuel plants may...
27 CFR 19.995 - Use on premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... Transfers § 19.995 Use on premises. Spirits may be used as a fuel on the premises of the alcohol fuel plant... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Use on premises. 19.995 Section 19.995 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT...
Fuel Cell Vehicle Basics | NREL
Fuel Cell Vehicle Basics Fuel Cell Vehicle Basics Researchers are developing fuel cells that can be silver four-door sedan being driven on a roadway and containing the words "hydrogen fuel cell electric" across the front and rear doors. This prototype hydrogen fuel cell electric vehicle was
Code of Federal Regulations, 2011 CFR
2011-04-01
... OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Distilled Spirits for Fuel Use General § 19.662 Definitions. As used in this subpart, the following terms have the meanings indicated. Alcohol fuel plant. A... exclusively for fuel use. Bonded premises. The premises of an alcohol fuel plant where distilled spirits are...
Code of Federal Regulations, 2013 CFR
2013-04-01
... OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Distilled Spirits for Fuel Use General § 19.662 Definitions. As used in this subpart, the following terms have the meanings indicated. Alcohol fuel plant. A... exclusively for fuel use. Bonded premises. The premises of an alcohol fuel plant where distilled spirits are...
Code of Federal Regulations, 2012 CFR
2012-04-01
... OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Distilled Spirits for Fuel Use General § 19.662 Definitions. As used in this subpart, the following terms have the meanings indicated. Alcohol fuel plant. A... exclusively for fuel use. Bonded premises. The premises of an alcohol fuel plant where distilled spirits are...
Code of Federal Regulations, 2014 CFR
2014-04-01
... OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Distilled Spirits for Fuel Use General § 19.662 Definitions. As used in this subpart, the following terms have the meanings indicated. Alcohol fuel plant. A... exclusively for fuel use. Bonded premises. The premises of an alcohol fuel plant where distilled spirits are...
27 CFR 19.728 - Withdrawal of spirits.
Code of Federal Regulations, 2011 CFR
2011-04-01
... premises of an alcohol fuel plant, the proprietor must render the spirits unfit for beverage use as... alcohol fuel plant premises if they will be used exclusively for fuel. (26 U.S.C. 5181, 5214) ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Withdrawal of spirits. 19...
27 CFR 19.998 - Transfer in bond of spirits.
Code of Federal Regulations, 2010 CFR
2010-04-01
..., Withdrawals and Transfers § 19.998 Transfer in bond of spirits. (a) Transfer between alcohol fuel plants. A proprietor may remove spirits from the bonded premises of an alcohol fuel plant (including the premises of a small plant) for transfer in bond to another alcohol fuel plant. Bulk conveyances in which spirits are...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fritsky, K.J.; Miller, D.L.; Cernansky, N.P.
1994-09-01
A methodology was introduced for modeling the devolatilization characteristics of refuse-derived fuel (RFD) in terms of temperature-dependent weight loss. The basic premise of the methodology is that RDF is modeled as a combination of select municipal solid waste (MSW) components. Kinetic parameters are derived for each component from thermogravimetric analyzer (TGA) data measured at a specific set of conditions. These experimentally derived parameters, along with user-derived parameters, are inputted to model equations for the purpose of calculating thermograms for the components. The component thermograms are summed to create a composite thermogram that is an estimate of the devolatilization for themore » as-modeled RFD. The methodology has several attractive features as a thermal analysis tool for waste fuels. 7 refs., 10 figs., 3 tabs.« less
Syllogistic reasoning in fuzzy logic and its application to usuality and reasoning with dispositions
NASA Technical Reports Server (NTRS)
Zadeh, L. A.
1985-01-01
A fuzzy syllogism in fuzzy logic is defined to be an inference schema in which the major premise, the minor premise and the conclusion are propositions containing fuzzy quantifiers. A basic fuzzy syllogism in fuzzy logic is the intersection/product syllogism. Several other basic syllogisms are developed that may be employed as rules of combination of evidence in expert systems. Among these is the consequent conjunction syllogism. Furthermore, it is shown that syllogistic reasoning in fuzzy logic provides a basis for reasoning with dispositions; that is, with propositions that are preponderantly but not necessarily always true. It is also shown that the concept of dispositionality is closely related to the notion of usuality and serves as a basis for what might be called a theory of usuality - a theory which may eventually provide a computational framework for commonsense reasoning.
27 CFR 19.510 - Consignee premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... at alcohol fuel plants shall be separately identified and accounted for as for fuel use, and may not... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Consignee premises. 19.510 Section 19.510 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT...
27 CFR 19.508 - Consignor premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... plant or bonded wine cellar; or (ii) the consignor proprietor of an alcohol fuel plant to cover the... alcohol fuel plants qualified under 26 U.S.C. 5181. (3) The consignor proprietor may cover on one transfer... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Consignor premises. 19.508...
Improved nuclear fuel assembly grid spacer
Marshall, John; Kaplan, Samuel
1977-01-01
An improved fuel assembly grid spacer and method of retaining the basic fuel rod support elements in position within the fuel assembly containment channel. The improvement involves attachment of the grids to the hexagonal channel and of forming the basic fuel rod support element into a grid structure, which provides a design which is insensitive to potential channel distortion (ballooning) at high fluence levels. In addition the improved method eliminates problems associated with component fabrication and assembly.
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
2015-01-30
Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.
27 CFR 19.727 - Use on premises.
Code of Federal Regulations, 2011 CFR
2011-04-01
... premises of the alcohol fuel plant where they were produced without having to make them unfit for beverage... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Use on premises. 19.727 Section 19.727 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT...
9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.
Code of Federal Regulations, 2010 CFR
2010-01-01
... premises having contained scabby cattle. 73.11 Section 73.11 Animals and Animal Products ANIMAL AND PLANT... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises having contained scabby cattle. Means of conveyance, yards, pens, sheds, chutes, or other premises or...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
2015-01-01
Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.
Alternative Fuels Data Center: CNG Fuel System and Tank Maintenance
in this section... Natural Gas Basics Benefits & Considerations Stations Vehicles Availability fuel containers best practices document for more information. CNG Tank Inspection Performing a regular
Management of Naturally Occurring Radioactive Materials (NORM) in Canada
DOE Office of Scientific and Technical Information (OSTI.GOV)
Baweja, Anar S.; Tracy, Bliss L.
2008-08-07
In Canada, nuclear and radiological regulatory responsibilities are shared between the provinces/territories and the federal government. The Canadian Nuclear Safety Commission (CNSC) regulates nuclear fuel cycle materials and man-made radionuclides under the Nuclear Safety and Control Act (2000). The provinces and territories regulate NORM arising from industrial activities, not involving the nuclear fuel cycle materials. Present guideline--Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM)--was published in 2000 in order to bring uniformity to the management of NORM-related procedures to provide adequate radiation protection for workers and the general public. The basic premise of these guidelines is thatmore » the NORM-related activities should not be posing any greater hazard than those activities regulated under the Nuclear Safety and Control Act; these concepts are described in this paper.« less
Code of Federal Regulations, 2014 CFR
2014-01-01
... Extension Services, or the land-grant institutions, or their employees. (d) The 4-H Club Name and Emblem... the Secretary of Agriculture 4-H CLUB NAME AND EMBLEM § 8.4 Basic premises. (a) The 4-H Club Name and.... (b) The 4-H Club Name and Emblem may be used by authorized representatives of the United States...
Code of Federal Regulations, 2010 CFR
2010-01-01
... Extension Services, or the land-grant institutions, or their employees. (d) The 4-H Club Name and Emblem... the Secretary of Agriculture 4-H CLUB NAME AND EMBLEM § 8.4 Basic premises. (a) The 4-H Club Name and.... (b) The 4-H Club Name and Emblem may be used by authorized representatives of the United States...
Code of Federal Regulations, 2013 CFR
2013-01-01
... Extension Services, or the land-grant institutions, or their employees. (d) The 4-H Club Name and Emblem... the Secretary of Agriculture 4-H CLUB NAME AND EMBLEM § 8.4 Basic premises. (a) The 4-H Club Name and.... (b) The 4-H Club Name and Emblem may be used by authorized representatives of the United States...
Code of Federal Regulations, 2011 CFR
2011-01-01
... Extension Services, or the land-grant institutions, or their employees. (d) The 4-H Club Name and Emblem... the Secretary of Agriculture 4-H CLUB NAME AND EMBLEM § 8.4 Basic premises. (a) The 4-H Club Name and.... (b) The 4-H Club Name and Emblem may be used by authorized representatives of the United States...
Code of Federal Regulations, 2012 CFR
2012-01-01
... Extension Services, or the land-grant institutions, or their employees. (d) The 4-H Club Name and Emblem... the Secretary of Agriculture 4-H CLUB NAME AND EMBLEM § 8.4 Basic premises. (a) The 4-H Club Name and.... (b) The 4-H Club Name and Emblem may be used by authorized representatives of the United States...
Sample diversity and premise typicality in inductive reasoning: evidence for developmental change.
Rhodes, Marjorie; Brickman, Daniel; Gelman, Susan A
2008-08-01
Evaluating whether a limited sample of evidence provides a good basis for induction is a critical cognitive task. We hypothesized that whereas adults evaluate the inductive strength of samples containing multiple pieces of evidence by attending to the relations among the exemplars (e.g., sample diversity), six-year-olds would attend to the degree to which each individual exemplar in a sample independently appears informative (e.g., premise typicality). To test these hypotheses, participants were asked to select between diverse and non-diverse samples to help them learn about basic-level animal categories. Across various between-subject conditions (N=133), we varied the typicality present in the diverse and non-diverse samples. We found that adults reliably selected to examine diverse over non-diverse samples, regardless of exemplar typicality, six-year-olds preferred to examine samples containing typical exemplars, regardless of sample diversity, and nine-year-olds were somewhat in the midst of this developmental transition.
27 CFR 1.29 - Individual plant or premises.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Individual plant or... Applications for Permits § 1.29 Individual plant or premises. An application for a basic permit must be filed, and permit issued, to cover each individual plant or premises where any of the businesses specified in...
27 CFR 1.29 - Individual plant or premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Individual plant or... Applications for Permits § 1.29 Individual plant or premises. An application for a basic permit must be filed, and permit issued, to cover each individual plant or premises where any of the businesses specified in...
27 CFR 1.29 - Individual plant or premises.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Individual plant or... Applications for Permits § 1.29 Individual plant or premises. An application for a basic permit must be filed, and permit issued, to cover each individual plant or premises where any of the businesses specified in...
27 CFR 19.1001 - Consignee premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Consignee premises. 19.1001 Section 19.1001 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Distilled Spirits For Fuel Use Uses, Withdrawals...
27 CFR 19.999 - Consignor premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Consignor premises. 19.999 Section 19.999 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Distilled Spirits For Fuel Use Uses, Withdrawals and...
Removal of basic nitrogen compounds from hydrocarbon liquids
Givens, Edwin N.; Hoover, David S.
1985-01-01
A method is provided for reducing the concentration of basic nitrogen compounds in hydrocarbonaceous feedstock fluids used in the refining industry by providing a solid particulate carbonaceous adsorbent/fuel material such as coal having active basic nitrogen complexing sites on the surface thereof and the coal with a hydrocarbonaceous feedstock containing basic nitrogen compounds to facilitate attraction of the basic nitrogen compounds to the complexing sites and the formation of complexes thereof on the surface of the coal. The adsorbent coal material and the complexes formed thereon are from the feedstock fluid to provide a hydrocarbonaceous fluid of reduced basic nitrogen compound concentration. The coal can then be used as fuel for boilers and the like.
The Best of Both Worlds: Developing a Hybrid Data System for the ASF DAAC
NASA Astrophysics Data System (ADS)
Arko, S. A.; Buechler, B.; Wolf, V. G.
2017-12-01
The Alaska Satellite Facility (ASF) at the University of Alaska Fairbanks hosts the NASA Distributed Active Archive Center (DAAC) specializing in synthetic aperture radar (SAR). Historically, the ASF DAAC has hosted hardware on-premises and developed DAAC-specific software to operate, manage, and maintain the DAAC data system. In the past year, ASF DAAC has been moving many of the standard DAAC operations into the Amazon Web Services (AWS) cloud. This includes data ingest, basic pre-processing, archiving, and distribution within the AWS environment. While the cloud offers nearly unbounded capacity for expansion and a great host of services, there also can be unexpected and unplanned costs for such. Additionally, these costs can be difficult to forecast even with historic data usage patterns and models for future usage. In an effort to maximize the effectiveness of the DAAC data system, while still managing and accurately forecasting costs, ASF DAAC has developed a hybrid, cloud and on-premises, data system. The goal of this project is to make extensive use of the AWS cloud, and when appropriate, utilize on-premises resources to help constrain costs. This hybrid system attempts to mimic, on premises, a cloud environment using Kubernetes container orchestration in order that software can be run in either location with little change. Combined with hybrid data storage architecture, the new data system makes use of the great capacity of the cloud while maintaining an on-premises options. This presentation will describe the development of the hybrid data system, including the micro-services architecture and design, the container orchestration, and hybrid storage. Additional we will highlight the lessons learned through the development process, cost forecasting for current and future SAR-mission operations, and provide a discussion of the pros and cons of hybrid architectures versus all-cloud deployments. This development effort has led to a system that is capable and flexible for the future while allowing ASF DAAC to continue supporting the SAR community with the highest level of services.
27 CFR 19.407 - Consignee premises.
Code of Federal Regulations, 2011 CFR
2011-04-01
...) Identify separately any spirits that were produced at an alcohol fuel plant. Those spirits may not be... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Consignee premises. 19.407 Section 19.407 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT...
A Data Definition Language for GLAD (Graphic Language for Databases).
1986-06-20
basic premises. These principles state that a DBMS interface must be descriptive, powerful, easy-to use and easy to learn . This thesis proposes a data...basic premises. These principles state that a DBMS interface must be descriptive, powerful, easy to use and easy to learn . This thesis proposes a data...criteria will be the most successful. 9 If a system is hard to learn , of those capable of mastering the system few may be willing to expend the time and
Career Education for Elementary Grades.
ERIC Educational Resources Information Center
Dianna, Michael A.
Information and activities are provided to help elementary school teachers develop a career education "environment" for children. Ten basic premises of career education are outlined, and the key ideas and terms that emerge from the premises are defined. The eight goals of career education are set forth to provide the teacher with a base from which…
V-TECS Guide for Tractor Mechanic.
ERIC Educational Resources Information Center
Benson, Robert T.
This guide contains a course outline for a tractor mechanic course. The outline is organized by 15 duties: performing general skills and maintaining and servicing storage battery, ignition circuit, the cooling system, the charging circuit, the starting circuit, gasoline fuel system, diesel fuel system, basic engine, lubrication system, clutches,…
Diesel Mechanics: Fuel Systems.
ERIC Educational Resources Information Center
Foutes, William
This publication is the third in a series of three texts for a diesel mechanics curriculum. Its purpose is to teach the concepts related to fuel injection systems in a diesel trade. The text contains eight units. Each instructional unit includes some or all of these basic components: unit and specific (performance) objectives, suggested activities…
Code of Federal Regulations, 2013 CFR
2013-01-01
... premises of tick-infested animals; destruction or treating required. 72.24 Section 72.24 Animals and Animal... manure from carriers and premises of tick-infested animals; destruction or treating required. The litter... premises or inclosures which have contained interstate shipments of tick-infested animals, shall be...
Code of Federal Regulations, 2010 CFR
2010-01-01
... premises of tick-infested animals; destruction or treating required. 72.24 Section 72.24 Animals and Animal... manure from carriers and premises of tick-infested animals; destruction or treating required. The litter... premises or inclosures which have contained interstate shipments of tick-infested animals, shall be...
Code of Federal Regulations, 2011 CFR
2011-01-01
... premises of tick-infested animals; destruction or treating required. 72.24 Section 72.24 Animals and Animal... manure from carriers and premises of tick-infested animals; destruction or treating required. The litter... premises or inclosures which have contained interstate shipments of tick-infested animals, shall be...
Code of Federal Regulations, 2012 CFR
2012-01-01
... premises of tick-infested animals; destruction or treating required. 72.24 Section 72.24 Animals and Animal... manure from carriers and premises of tick-infested animals; destruction or treating required. The litter... premises or inclosures which have contained interstate shipments of tick-infested animals, shall be...
Taking the social origins of human nature seriously: toward a more imperialist social psychology.
Brewer, Marilynn B
2004-01-01
To recognize that human beings are adapted for social living is fundamental to the science of human psychology. I argue that the development of broad social psychological theory would benefit from taking this basic premise more seriously. We need to pay more attention to the implications for personality and social psychology of recognizing that all of the building blocks of human psychology--cognition, emotion, motivation--have been shaped by the demands of social interdependence. In this article I illustrate the generative potential of this basic premise for development of more expansive social theory.
Microbiological investigation of halal butchery products and butchers' premises.
Little, C; Gillespie, I; de Louvois, J; Mitchell, R
1999-06-01
Halal butchers' premises were investigated as they had not been represented in a recent study of butchery products and butchers' premises conducted by the Local Authorities Coordinating Body on Food and Trading Standards and the PHLS. This study examined 183 raw prepared meats and 212 environmental samples from 105 halal butcher premises. Only raw meats were prepared on 97 of the premises visited; and the types of meat prepared on the remaining eight premises was not specified. Four halal butchers sold cooked meats prepared elsewhere. Salmonella spp. and Campylobacter spp. were detected in 12 (7%) and 52 (28%) of the 183 raw meat products, respectively. Five raw prepared meats (3%) contained both salmonella and campylobacter. Vero cytotoxin producing Escherichia coli O157 was isolated from a raw meat product that also contained campylobacter. No cooked meat products were available for collection. The physical separation of raw and unwrapped cooked meat products in premises that prepared raw and sold cooked meats was not recorded. Apron cloths were the most heavily contaminated environmental samples examined; hygiene indicator microorganisms indicated an increased risk of cross contamination. Managers in 85 premises had received no food hygiene training and 88 premises had no hazard analysis system in place. Improvements are needed to reduce the risk of cross contamination.
ERIC Educational Resources Information Center
Gustafson, Joey; Keller, Eric; LaVallee, Robert E.; Stewart, Nichole H.
2010-01-01
A basic premise of charter school reform in public education is offering more autonomy in the use of funds and the design of curriculum in exchange for greater accountability in academic and financial outcomes. This premise poses a significant policy challenge for state policymakers to establish an appropriate level of regulation; charter schools…
Making IBM's Computer, Watson, Human
ERIC Educational Resources Information Center
Rachlin, Howard
2012-01-01
This essay uses the recent victory of an IBM computer (Watson) in the TV game, "Jeopardy," to speculate on the abilities Watson would need, in addition to those it has, to be human. The essay's basic premise is that to be human is to behave as humans behave and to function in society as humans function. Alternatives to this premise are considered…
ERIC Educational Resources Information Center
AlBzoor, Baseel Ali
2011-01-01
Liyerature;Drawing upon intrinsic linguistic and cultural premises, the present study is an attempt to explore semantic and pragmatic failure, evidently and frequently arising while translating literary texts. This researcher has adopted a functional approach that hinges upon basic semantic and pragmatic premises that best fit the framework of an…
Universal Basic Education Policy: Impact on Enrolment and Retention
ERIC Educational Resources Information Center
Iddrisu, Issah
2016-01-01
The universal basic education policy enshrined in the constitution of Ghana is aimed at making education accessible and affordable for all Ghanaian citizens. This paper sought to assess whether the universal basic education policy really have an impact on access at the basic level. The study was carried out on the premise that the universal basic…
9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.
Code of Federal Regulations, 2013 CFR
2013-01-01
... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises... facilities which have contained cattle of a consignment in which scabies is found shall be treated within 72...
9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.
Code of Federal Regulations, 2011 CFR
2011-01-01
... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises... facilities which have contained cattle of a consignment in which scabies is found shall be treated within 72...
9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.
Code of Federal Regulations, 2014 CFR
2014-01-01
... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises... facilities which have contained cattle of a consignment in which scabies is found shall be treated within 72...
9 CFR 73.11 - Treatment of means of conveyance and premises having contained scabby cattle.
Code of Federal Regulations, 2012 CFR
2012-01-01
... POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.11 Treatment of means of conveyance and premises... facilities which have contained cattle of a consignment in which scabies is found shall be treated within 72...
Therapeutic plasma exchange: a technical and operational review.
Kaplan, Andre A
2013-02-01
Therapeutic plasma exchange (TPE) is an extracorporeal blood purification technique designed for the removal of large molecular weight substances. Examples of these substances include pathogenic autoantibodies, immune complexes, cryoglobulins, myeloma light chains, endotoxin and cholesterol containing lipoproteins. The basic premise of the treatment is that removal of these substances will allow for the reversal of the pathologic processes related to their presence. This review will cover the techniques for performing TPE, the kinetics of the removal of large molecules from the plasma and the benefits and risks of the different types of replacement fluids. Copyright © 2013 Wiley Periodicals, Inc.
27 CFR 19.996 - Withdrawal of spirits.
Code of Federal Regulations, 2010 CFR
2010-04-01
... alcohol fuel plant, they must be rendered unfit for beverage use as provided in this subpart. Spirits rendered unfit for beverage use (fuel alcohol) may be withdrawn free of tax from plant premises exclusively... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Withdrawal of spirits. 19...
Dry-vault storage of spent fuel at the CASCAD facility
DOE Office of Scientific and Technical Information (OSTI.GOV)
Baillif, L.; Guay, M.
A new modular dry storage vault concept using vertical metallic wells cooled by natural convection has been developed by the Commissariat a l'Energie Atomique and Societe Generale pour les Techniques Nouvelles to accommodate special fuels for high-level wastes. Basic specifications and design criteria have been followed to guarantee a double containment system and cooling to maintain the fuel below an acceptable temperature. The double containment is provided by two static barriers: At the reactor, fuels are placed in containers playing the role of the first barrier; the storage wells constitute the second barrier. Spent fuel placed in wells is cooledmore » by natural convection: a boundary layer is created along the outer side of the well. The heated air rises along the well leading to a thermosiphon flow that extracts the heat released. For heat transfer, studies, computations, and experimental tests have been carried out to calculate and determine the temperature of the containers and the fuel rod temperatures in various situations. The CASCAD vault storage can be applied to light water reactor (LWR) fuels without any difficulties if two requirements are satisfied: (1) Spend fuels have to be inserted in tight canisters. (2) Spent fuels have to be received only after a minimum decay time of 5 yr.« less
ERIC Educational Resources Information Center
Gay, John; And Others
The basic premise of this text is that, in addition to the presentation of basic cognitive and affective information, health education should go one step further by assisting student in developing decision-making skills. The text begins by offering the student a basic foundation of what is meant by health and how this meaning applies to the world,…
27 CFR 19.828 - Removals from the premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
... premises vinegar or other fluid or material containing more than 2% alcohol by volume. Records ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removals from the premises. 19.828 Section 19.828 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU...
Steam Reforming of Methyl Fuel - Phase I
1977-06-30
best catalyst . 2.0 TEST DESCRIPTION 2.1 Technical Background The basic reactions occurring in steam reforming of methanol are CH3OH + H20 CO2 + 3H 2...chamber contains the test catalyst . The fuel feed tank was filled with premixed methanol /gasoline mixture. Fuel flow as well as water flow were measured...carbon-oxygen bond formation and therefore follows a different mechanism than the methanol reaction . Different catalysts promote these types of
History of United States Energy. A Basic Teaching Unit on Energy. Revised.
ERIC Educational Resources Information Center
McDermott, Hugh, Ed.; Scharmann, Larry, Ed.
Intended as a supplement to the units "Oil: Fuel of the Past" and "Coal: Fuel of the Past, Hope of the Future," this 3-4 day unit contains three activities which briefly explain the chronological development of energy resources and the formation and development of the Organization of Petroleum Exporting Countries (OPEC). The…
The JRC-ITU approach to the safety of advanced nuclear fuel cycles
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fanghaenel, T.; Rondinella, V.V.; Somers, J.
2013-07-01
The JRC-ITU safety studies of advanced fuels and cycles adopt two main axes. First the full exploitation of still available and highly relevant knowledge and samples from past fuel preparation and irradiation campaigns (complementing the limited number of ongoing programmes). Secondly, the shift of focus from simple property measurement towards the understanding of basic mechanisms determining property evolution and behaviour of fuel compounds during normal, off-normal and accident conditions. The final objective of the second axis is the determination of predictive tools applicable to systems and conditions different from those from which they were derived. State of the art experimentalmore » facilities, extensive networks of partnerships and collaboration with other organizations worldwide, and a developing programme for training and education are essential in this approach. This strategy has been implemented through various programs and projects. The SUPERFACT programme constitutes the main body of existing knowledge on the behavior in-pile of MOX fuel containing minor actinides. It encompassed all steps of a closed fuel cycle. Another international project investigating the safety of a closed cycle is METAPHIX. In this case a U-Pu19-Zr10 metal alloy containing Np, Am and Cm constitutes the fuel. 9 test pins have been prepared and irradiated. In addition to the PIE (Post Irradiation Examination), pyrometallurgical separation of the irradiated fuel has been performed, to demonstrate all the steps of a multiple recycling closed cycle and characterize their safety relevant aspects. Basic studies like thermodynamic fuel properties, fuel-cladding-coolant interactions have also been carried out at JRC-ITU.« less
27 CFR 19.710 - Inventory of spirits.
Code of Federal Regulations, 2011 CFR
2011-04-01
... Spirits § 19.710 Inventory of spirits. A proprietor of an alcohol fuel plant must take a physical inventory of all spirits and fuel alcohol on the bonded premises at the end of each calendar year. The... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Inventory of spirits. 19...
1978-07-01
degrades thermal stability and forms undesirable sulfur dioxide emissions . Although the original premises for controlling total sulfur may not still...eliminate corrosive trace contamination, presence of surfactants which deactivate filter/ separators, carry-over of refinery processing materials, and...increase raw vapor emissions from ground fuel handling facilities and during refueling operations. Controlling raw vapor emissions is difficult at 3
Harkness, Kate L; Monroe, Scott M
2016-07-01
Life stress is a central factor in the onset and course of a wide range of medical and psychiatric conditions. Determining the precise etiological and pathological consequences of stress, though, has been hindered by weaknesses in prevailing definitional and measurement practices. The purpose of the current paper is to evaluate the primary strategies for defining and measuring major and minor acute life events, chronic stressors, and daily hassles as informed by 3 basic scientific premises. The first premise concerns the manner in which stress is conceptualized and operationally defined, and specifically we assert that stress measures must not conflate the stress exposure with the stress response. The second premise concerns how stress exposures are measured, and we provide guidelines for optimizing standardized and sensitive indicators of life stress. The third premise addresses the consequences of variations in the procedures for life event measurement with regard to the validity of the research designs employed. We show that life stress measures are susceptible to several sources of bias, and if these potential sources of bias are not controlled in the design of the research, spurious findings may result. Our goal is to provide a useful guide for researchers who consider life stress to be an important factor in their theoretical models of disease, wish to incorporate measures of life stress in their research, and seek to avoid the common pitfalls of past measurement practices. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Modelling of radiation field around spent fuel container.
Kryuchkov, E F; Opalovsky, V A; Tikhomirov, G V
2005-01-01
Operation of nuclear reactors leads to the production of spent nuclear fuel (SNF). There are two basic strategies of SNF management: ultimate disposal of SNF in geological formations and recycle or repeated utilisation of reprocessed SNF. In both options, there is an urgent necessity to study radiation properties of SNF. Information about SNF radiation properties is required at all stages of SNF management. In order to reach more effective utilisation of nuclear materials, new fuel cycles are under development based on uranium-plutonium, uranium-thorium and some other types of nuclear fuel. These promising types of nuclear fuel are characterised by quite different radiation properties at all the stages of nuclear fuel cycle (NFC) listed above. So, comparative analysis is required for radiation properties of different nuclear fuel types at different NFC stages. The results presented here were obtained from the numerical analysis of the radiation field around transport containers of different SNF types and in SNF storage. The calculations are carried out with the application of the computer code packages SCALE-4.3 and MCNP-4C. Comparison of the dose parameters obtained for different models of the transport container with experimental data allowed us to make certain conclusions about the errors of numerical results caused by the approximate geometrical description of the transport container.
Scientific bases of biomass processing into basic component of aviation fuel
NASA Astrophysics Data System (ADS)
Kachalov, V. V.; Lavrenov, V. A.; Lishchiner, I. I.; Malova, O. V.; Tarasov, A. L.; Zaichenko, V. M.
2016-11-01
A combination of feedstock pyrolysis and the cracking of the volatile pyrolysis products on the charcoal at 1000 °C allows to obtain a tarless synthesis gas which contains 90 vol% or more of carbon monoxide and hydrogen in approximately equal proportions. Basic component of aviation fuel was synthesized in a two-stage process from gas obtained by pyrolytic processing of biomass. Methanol and dimethyl ether can be efficiently produced in a two-layer loading of methanolic catalyst and γ-Al2O3. The total conversion of CO per pass was 38.2% using for the synthesis of oxygenates a synthesis gas with adverse ratio of H2/CO = 0.96. Conversion of CO to CH3OH was 15.3% and the conversion of CO to dimethyl ether was 20.9%. A high yield of basic component per oxygenates mass (44.6%) was obtained during conversion. The high selectivity of the synthesis process for liquid hydrocarbons was observed. An optimal recipe of aviation fuel B-92 based on a synthesized basic component was developed. The prototype of aviation fuel meets the requirements for B-92 when straight fractions of 50-100 °C (up to 35 wt%), isooctane (up to 10 wt%) and ethyl fluid (2.0 g/kg calculated as tetraethyl lead) is added to the basic component.
Code of Federal Regulations, 2014 CFR
2014-01-01
... premises of tick-infested animals; destruction or treating required. 72.24 Section 72.24 Animals and Animal... and premises of tick-infested animals; destruction or treating required. The litter and manure removed... which have contained interstate shipments of tick-infested animals, shall be destroyed or treated by the...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Cars, vehicles, and premises; cleaning and treatment after containing infested or exposed animals. 72.22 Section 72.22 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE TRANSPORTATION OF...
Auto Mechanics I. Learning Activity Packets (LAPs). Section C--Engine.
ERIC Educational Resources Information Center
Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.
This document contains five learning activity packets (LAPs) that outline the study activities for the "engine" instructional area for an Auto Mechanics I course. The five LAPs cover the following topics: basic engine principles, cooling system, engine lubrication system, exhaust system, and fuel system. Each LAP contains a cover sheet…
Kusumawathie, Pad; Palihawadana, Paba; Janaki, Sakoo; Wijemuni, Ruwan; Wilder-Smith, Annelies; Tissera, Hasitha A.
2016-01-01
Introduction Dengue has emerged as a major public health problem in Sri Lanka. Vector control at community level is a frequent and widespread strategy for dengue control. The aim of the study was to assess Aedes mosquito breeding sites and the prevention practices of community members in a heavily urbanized part of Colombo. Methods A cross-sectional entomological survey was conducted from April to June 2013 in 1469 premises located in a subdistrict of the City of Colombo. Types of breeding sites and, where found, their infestation with larvae or pupae were recorded. Furthermore, a questionnaire was administered to the occupants of these premises to record current practices of dengue vector control. Results The surveyed premises consisted of 1341 residential premises and 110 non-residential premises (11 schools, 99 work or public sites), 5 open lands, and 13 non-specified. In these 1469 premises, 15447 potential breeding sites suitable to host larvae of pupae were found; of these sites18.0% contained water. Among the 2775 potential breeding sites that contained water, 452 (16.3%) were positive for larvae and/or pupae. Schools were associated with the proportionally highest number of breeding sites; 85 out of 133 (63.9%) breeding sites were positive for larvae and/or pupae in schools compared with 338 out of 2288 (14.8%) in residential premises. The odds ratio (OR) for schools and work or public sites for being infested with larvae and/or pupae was 2.77 (95% CI 1.58, 4.86), when compared to residential premises. Occupants of 80.8% of the residential premises, 54.5% of the schools and 67.7% of the work or public sites reported using preventive measures. The main prevention practices were coverage of containers and elimination of mosquito breeding places. Occupants of residential premises were much more likely to practice preventive measures than were those of non-residential premises (OR 2.23; 1.49, 3.36). Conclusion Schools and working sites were associated with the highest numbers of breeding sites and lacked preventive measures for vector control. In addition to pursuing vector control measures at residential level, public health strategies should be expanded in schools and work places. PMID:27241954
BASIC ELECTRICITY. SCIENCE IN ACTION SERIES, NUMBER 14.
ERIC Educational Resources Information Center
CASSEL, RICHARD
THIS TEACHING GUIDE, INVOLVING ACTIVITIES FOR DEVELOPING AN UNDERSTANDING OF BASIC ELECTRICITY, EMPHASIZES STUDENT INVESTIGATIONS RATHER THAN FACTS, AND IS BASED ON THE PREMISE THAT THE MAJOR GOAL IN SCIENCE TEACHING IS THE DEVELOPMENT OF THE INVESTIGATIVE ATTITUDE IN THE STUDENT. ACTIVITIES SUGGESTED INVOLVE SIMPLE DEMONSTRATIONS AND EXPERIMENTS…
Methods in Teaching Basic Business Subjects.
ERIC Educational Resources Information Center
Musselman, Vernon A.
The textbook is intended for use in college methods classes in business education, is self-teachable, written informally, and includes two complete teaching units in detail. On the premise that classroom procedures utilized in teaching the basic business subjects differ considerably from those employed in teaching the skill subjects, the book…
27 CFR 19.133 - Use of distilled spirits plant premises.
Code of Federal Regulations, 2010 CFR
2010-04-01
..., or other portable containers on bonded premises shall be stored in a room or building. However, upon application by the proprietor, appropriate TTB officer may approve an alternative method of storage of such...
Hydrogen and Fuel Cell Basics | Hydrogen and Fuel Cells | NREL
Hydrogen and Fuel Cell Basics Hydrogen and Fuel Cell Basics NREL researchers are working to unlock the potential of hydrogen as a fuel and to advance fuel cell technologies for automobiles, equipment basics of NREL's hydrogen and fuel cell research and development. Fuel cell electric vehicles (FCEVs
NASA Astrophysics Data System (ADS)
Králik, Juraj
2017-07-01
The paper presents the probabilistic and sensitivity analysis of the efficiency of the damping devices cover of nuclear power plant under impact of the container of nuclear fuel of type TK C30 drop. The finite element idealization of nuclear power plant structure is used in space. The steel pipe damper system is proposed for dissipation of the kinetic energy of the container free fall. The experimental results of the shock-damper basic element behavior under impact loads are presented. The Newmark integration method is used for solution of the dynamic equations. The sensitivity and probabilistic analysis of damping devices was realized in the AntHILL and ANSYS software.
Energy and Economics. [Revised Edition.
ERIC Educational Resources Information Center
Walstad, William; Gleason, Joyce
This unit is designed to provide high school students with an introduction to topics of energy and economics. A basic premise of the unit is that energy issues and economics are interrelated. It is believed that the application of basic economic concepts to energy issues can provide students with the tools to improve their analysis of problems and…
Highway diesel progress review report 2.
DOT National Transportation Integrated Search
2004-03-01
The Environmental Protection Agency (EPA : or the Agency) established in 2000 new far : reaching emission standards beginning in 2007 for : heavy-duty diesel vehicl : es and the fuel used : in them. These standards were premised on : the introduction...
Diversity of containers and buildings infested with Aedes aegypti in Puerto Iguazú, Argentina.
Costa, Federico; Fattore, Gladys; Abril, Marcelo
2012-09-01
Aedes aegypti is the main domestic vector of the dengue virus. Control measures to prevent dengue transmission focus on the treatment and elimination of this vector's oviposition sites. There is limited biological information on Ae. aegypti in Argentina. The aim of this study was to characterize Ae. aegypti oviposition sites in the city of Puerto Iguazú, Argentina. We surveyed an area covering nine neighborhoods in 2005. We identified 191 premises as positive for Ae. aegypti, giving a general house index of 9.6%. Premises classified as residential and vacant lots presented the highest number of infested premises, with 9% and 22% respectively. The total number of surveyed containers was 29,600. The overall container index (CI) was 1.1. The most frequently infested containers were water tanks (CI = 37). These preliminary results suggest that vacant lots and water tanks provide suitable breeding areas and environmental conditions, improving the chances of Ae. aegypti survival in Puerto Iguazú.
Policies that Clarify Student Rights & Responsibilities. School Board Policy Development Kit.
ERIC Educational Resources Information Center
National School Boards Association, Waterford, CT. Educational Policies Service.
This kit discusses written policies basic to student rights and responsibilities, including those based on the constitution and those not. Specific policies should be based on three broad, basic premises: (1) recognition that freedom implies the right to make mistakes as long as these mistakes do not endanger life and property or are not seriously…
Dismantling of Loop-Type Channel Equipment of MR Reactor in NRC 'Kurchatov Institute' - 13040
DOE Office of Scientific and Technical Information (OSTI.GOV)
Volkov, Victor; Danilovich, Alexey; Zverkov, Yuri
2013-07-01
In 2009 the project of decommissioning of MR and RTF reactors was developed and approved by the Expert Authority of the Russian Federation (Gosexpertiza). The main objective of the decommissioning works identified in this project: - complete dismantling of reactor equipment and systems; - decontamination of reactor premises and site in accordance with the established sanitary and hygienic standards. At the preparatory stage (2008-2010) of the project the following works were executed: loop-type channels' dismantling in the storage pool; experimental fuel assemblies' removal from spent fuel repositories in the central hall; spent fuel assembly removal from the liquid-metal-cooled loop-type channelmore » of the reactor core and its placement into the SNF repository; and reconstruction of engineering support systems to the extent necessary for reactor decommissioning. The project assumes three main phases of dismantling and decontamination: - dismantling of equipment/pipelines of cooling circuits and loop-type channels, and auxiliary reactor equipment (2011-2012); - dismantling of equipment in underground reactor premises and of both MR and RTF in-vessel devices (2013-2014); - decontamination of reactor premises; rehabilitation of the reactor site; final radiation survey of reactor premises, loop-type channels and site; and issuance of the regulatory authorities' de-registration statement (2015). In 2011 the decommissioning license for the two reactors was received and direct MR decommissioning activities started. MR primary pipelines and loop-type facilities situated in the underground reactor hall were dismantled. Works were also launched to dismantle the loop-type channels' equipment in underground reactor premises; reactor buildings were reconstructed to allow removal of dismantled equipment; and the MR/RTF decommissioning sequence was identified. In autumn 2011 - spring 2012 results of dismantling activities performed are: - equipment from underground rooms (No. 66, 66A, 66B, 72, 64, 63) - as well as from water and gas loop corridors - was dismantled, with the total radwaste weight of 53 tons and the total removed activity of 5,0 x 10{sup 10} Bq; - loop-type channel equipment from underground reactor hall premises was dismantled; - 93 loop-type channels were characterized, chopped and removed, with radwaste of 2.6 x 10{sup 13} Bq ({sup 60}Co) and 1.5 x 10{sup 13} Bq ({sup 137}Cs) total activity removed from the reactor pool, fragmented and packaged. Some of this waste was placed into the high-level waste (HLW) repository of the Center. Dismantling works were executed with application of remotely operated mechanisms, which promoted decrease of radiation impact on the personnel. The average individual dose for the personnel was 1.9 mSv/year in 2011, and the collective dose is estimated as 0.0605 man x Sv/year. (authors)« less
History as a Moving Experience.
ERIC Educational Resources Information Center
English, Eleanor B.
1980-01-01
The basic premise of the Movement Research Project (MRP) is to have groups of undergraduate students investigate, report, demonstrate, and teach selected movement activities of peoples from various historical periods by combining movement with dramatic techniques. (JN)
USDA-ARS?s Scientific Manuscript database
Premise of study: Premise of study: The taxonomic classification of the subspecies of Daucus carota is unresolved. Intercrosses among traditionally recognized subspecies has been well-documented, as have intercrosses with other Daucus species containing 2n = 18 chromosomes (D. sahariensis and D. syr...
Reforming of natural gas—hydrogen generation for small scale stationary fuel cell systems
NASA Astrophysics Data System (ADS)
Heinzel, A.; Vogel, B.; Hübner, P.
The reforming of natural gas to produce hydrogen for fuel cells is described, including the basic concepts (steam reforming or autothermal reforming) and the mechanisms of the chemical reactions. Experimental work has been done with a compact steam reformer, and a prototype of an experimental reactor for autothermal reforming was tested, both containing a Pt-catalyst on metallic substrate. Experimental results on the steam reforming system and a comparison of the steam reforming process with the autothermal process are given.
Experimental Study on Relationship between NOx Emission and Fuel Consumption of a Diesel Engine
NASA Astrophysics Data System (ADS)
Ning, Ping; Liu, Chunjiang; Feng, Zhiqiang; Xia, Yijiang
2018-01-01
For YC6112 diesel engine assembled Delphl model single fuel pump electric controlled, in the premise of not changing its overall unit structure parameters of other systems, three different types of camshaft for single pumps, two kinds of fuel injectors, two types of superchargers and some phase shifting angle of different camshafts were chosen to match with the engine precisely, the experiments under thirteen kinds of working conditions for the engine with different matching were carried out, the change regulation between NOX emission and fuel consumption for the engine with different kinds of configurations was analyzed. The experiment results show the NOX emission and fuel consumption can be reduced greatly by configuring proper camshaft, fuel injectors and superchargers with YC6112 diesel engine.
What a Golden Opportunity If--
ERIC Educational Resources Information Center
Reussig, James M.
1975-01-01
The author, a superintendent of the Vallejo City Unified School District in California, considered the basic premise of the RISE Commission Report, i.e., that the learner is the primary client to be served by the school. (Author/RK)
Code of Federal Regulations, 2010 CFR
2010-10-01
... traveled portion of a public street or highway; (2) On private property (including premises of fueling or... bridge, tunnel, dwelling, or place where people work, congregate, or assemble, except for brief periods... public street or highway except for brief periods when the necessities of operation require the vehicle...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Blaser, Richard
1980-11-01
This compilation, a draft training manual containing technical background information on internal combustion engines and alcohol motor fuel technologies, is presented in 3 parts. The first is a compilation of facts from the state of the art on internal combustion engine fuels and their characteristics and requisites and provides an overview of fuel sources, fuels technology and future projections for availability and alternatives. Part two compiles facts about alcohol chemistry, alcohol identification, production, and use, examines ethanol as spirit and as fuel, and provides an overview of modern evaluation of alcohols as motor fuels and of the characteristics of alcoholmore » fuels. The final section compiles cross references on the handling and combustion of fuels for I.C. engines, presents basic evaluations of events leading to the use of alcohols as motor fuels, reviews current applications of alcohols as motor fuels, describes the formulation of alcohol fuels for engines and engine and fuel handling hardware modifications for using alcohol fuels, and introduces the multifuel engines concept. (LCL)« less
Promoting bicycle commuter safety.
DOT National Transportation Integrated Search
2012-02-01
A basic premise in this report is that cycling should be encouraged because as the number of cyclists increases, the attention of motorists and safety improves; however, an important caveat is that the number of cyclists has to be commensurate with t...
Soviet Strategy and the Objectives of Their Naval Presence in the Mediterranean.
1982-09-01
peacetime compare with this basic breakdown of functions? Several observations can be made straightaway. First, as far as the Soviets are concerned...completely divorced from reality; and following the Soviets’ basic argument from premises to conclusions provides potentially useful insight into some...213 Mangel, Marc. -Stochastic Machanics Of 140lecuiSIOn Molecule Mangol. Marc. -Fluctuations In Systems with Multipie Steady Rections," 23 pp., Jun
Massry, S G; Smogorzewski, M; Hazani, E; Shasha, S M
1997-01-01
Both the Old Testament and the Talmud contain a great deal of information on medicine, nephrology, health and disease. The basic premise of early Jewish medicine is based on the notion that disease is due to structural changes in internal organs. This is in contrast to the mythical dogma of humoralism as the basis of health and disease espoused by Hippocrates and Galen. The Old Testament and the Mosaic Codes provided the basis for modern public health and for the hygienic rules practised in our times. The Talmudists laid the foundations for the science of pathology as we know it today. These issues are discussed in detail and the contributions of three prominent medieval physicians (Asaph Judaeus, Isaac Judaeus and Maimonides) are presented.
NASA Technical Reports Server (NTRS)
1975-01-01
The use of information from space systems in the operation of extractive industries, particularly in exploration for mineral and fuel resources was reviewed. Conclusions and recommendations reported are based on the fundamental premise that survival of modern industrial society requires a continuing secure flow of resources for energy, construction and manufacturing, and for use as plant foods.
27 CFR 19.930 - Alternating proprietorship.
Code of Federal Regulations, 2010 CFR
2010-04-01
... the boundaries of the plant or any part thereof which is to be alternated. (d) Alternation Journal... journal the following information: (1) Name or trade name; (2) Alcohol fuel plant permit number; (3) Date... journal will remain in the possession of the incoming proprietor until the premises are again alternated...
Best practices in transit service planning : final report, March 2009.
DOT National Transportation Integrated Search
2009-03-01
The provision of cost efficient and effective bus transit service is the basic premise upon which transit service is developed and the goal that all public transportations agencies strive to achieve. To attain this goal, public transit agencies must ...
Promoting bicycle commuter safety : [research brief].
DOT National Transportation Integrated Search
2012-02-01
A basic premise in this report is that cycling should be encouraged because as the number of cyclists increases, the attention of motorists and safety improves. However, an important caveat is that the number of cyclists has to be commensurate with t...
An Efficient Composition for Bengal Lights
NASA Astrophysics Data System (ADS)
Comet, M.; Schreyeck, L.; Fuzellier, H.
2002-01-01
Fuel-oxidizer mixtures based on potassium chlorate or sodium chlorate are well known. These mixtures have interesting properties of deflagration and are often used in propellants. Drastic reactivity of alkaline chlorates with ammonium salts due to the formation of ammonium chlorate NH4ClO3, a very unstable salt, is famous. By analogy, we tested the reactivity of different molecules containing nitrogen atoms, and we found an efficient fuel-oxidizer composed of potassium chlorate and thiocarbamide. Impressive bengal lights of various colors can easily be achieved using this basic composition.
DOE Office of Scientific and Technical Information (OSTI.GOV)
McDeavitt, Sean
2016-08-02
This Integrated Research Project (IRP) was established to characterize key limiting phenomena related to the performance of used nuclear fuel (UNF) storage systems. This was an applied engineering project with a specific application in view (i.e., UNF dry storage). The completed tasks made use of a mixture of basic science and engineering methods. The overall objective was to create, or enable the creation of, predictive tools in the form of observation methods, phenomenological models, and databases that will enable the design, installation, and licensing of dry UNF storage systems that will be capable of containing UNF for extended period ofmore » time.« less
Studies of the mechanisms of turbine fuel instability
NASA Technical Reports Server (NTRS)
Daniel, S. R.
1983-01-01
The formation of insoluble deposits in a Jet A, a Diesel, and a model fuel (1/10 v/v tetralin/dodecane) was studied. Experiments were conducted using glass containers at 394 K with an air/fuel ratio of 14/1. The effects of addition of ppm levels of various compounds on deposit formation were evaluated. Nitrogen heterocycles were shown to produce a basicity dependent acceleration of deposition. Thiols and thiophene were shown to increase deposition while sulfides and disulfides act as inhibitors. Copper metal and its salts also promote deposition. Results of various instrumental analyses of deposits and development of a high performance liquid chromatographic method for monitoring deposit precursors are discussed.
DOT National Transportation Integrated Search
2013-06-01
This System Design document for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US Department of Transportation Integrated Corridor Management Initiative. The basic premise behind the ICM initiative is that in...
The Role of Metaphor in Darwin and the Implications for Teaching Evolution
ERIC Educational Resources Information Center
Pramling, Niklas
2009-01-01
This article is about the role of metaphor in scientific knowledge formation and reasoning. These issues are studied by means of an example of the theory of evolution through natural selection. The premise is that the theory of evolution contains a set of problems regarding metaphor. A second premise is that these problems have to be handled in…
27 CFR 24.183 - Use of distillates containing aldehydes.
Code of Federal Regulations, 2013 CFR
2013-04-01
... containing aldehydes. 24.183 Section 24.183 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... distillates containing aldehydes. Distillates containing aldehydes may be received on wine premises for use in... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received...
27 CFR 24.183 - Use of distillates containing aldehydes.
Code of Federal Regulations, 2012 CFR
2012-04-01
... containing aldehydes. 24.183 Section 24.183 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... distillates containing aldehydes. Distillates containing aldehydes may be received on wine premises for use in... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received...
27 CFR 24.183 - Use of distillates containing aldehydes.
Code of Federal Regulations, 2014 CFR
2014-04-01
... containing aldehydes. 24.183 Section 24.183 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... distillates containing aldehydes. Distillates containing aldehydes may be received on wine premises for use in... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received...
27 CFR 24.183 - Use of distillates containing aldehydes.
Code of Federal Regulations, 2011 CFR
2011-04-01
... containing aldehydes. 24.183 Section 24.183 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... distillates containing aldehydes. Distillates containing aldehydes may be received on wine premises for use in... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received...
Ginosar, Daniel M.; Fox, Robert V.
2005-05-03
A process for producing alkyl esters useful in biofuels and lubricants by transesterifying glyceride- or esterifying free fatty acid-containing substances in a single critical phase medium is disclosed. The critical phase medium provides increased reaction rates, decreases the loss of catalyst or catalyst activity and improves the overall yield of desired product. The process involves the steps of dissolving an input glyceride- or free fatty acid-containing substance with an alcohol or water into a critical fluid medium; reacting the glyceride- or free fatty acid-containing substance with the alcohol or water input over either a solid or liquid acidic or basic catalyst and sequentially separating the products from each other and from the critical fluid medium, which critical fluid medium can then be recycled back in the process. The process significantly reduces the cost of producing additives or alternatives to automotive fuels and lubricants utilizing inexpensive glyceride- or free fatty acid-containing substances, such as animal fats, vegetable oils, rendered fats, and restaurant grease.
DOT National Transportation Integrated Search
2015-05-01
This As-Built document for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US Department of Transportation Integrated Corridor Management Initiative. The basic premise behind the ICM initiative is that indepen...
Block by Block: Civic Action in the Battle of Baghdad
2007-11-01
powdered musk and ambergris. Arts and sciences flourished— literature, music, calligraphy, philosophy, mathematics, chemistry, history. All that was...of the insur- gency, (i.e., guerrilla, underground, and auxiliary). The basic premise of civic-action operations is that the lower ech- elon of
Alternative Fuels Data Center: Hydrogen Basics
; Incentives Hydrogen Basics Hydrogen (H2) is an alternative fuel that can be produced from diverse domestic for domestic production, its fast filling time, and the fuel cell's high efficiency. In fact, a fuel
ERIC Educational Resources Information Center
Blackburn, Robert T.; Baldwin, Roger G.
1983-01-01
The issue of maintaining institutional vitality through the development of faculty confronts higher education with a new set of problems. Higher education should reexamine its basic premises on employee expectations and look at career paths of other professionals in other kinds of organizations. What is needed is a healthy flow of people through…
Mastery Learning in Physical Education.
ERIC Educational Resources Information Center
Annarino, Anthony
This paper discusses the design of a physical education curriculum to be used in advanced secondary physical education programs and in university basic instructional programs; the design is based on the premise of mastery learning and employs programed instructional techniques. The effective implementation of a mastery learning model necessitates…
A Structure for Pedagogical Art Criticism.
ERIC Educational Resources Information Center
Anderson, Tom
1988-01-01
Develops method for incorporating the intuitive and affective with intellectual and analytic components for understanding works of art. States that the premises for such a systematization include both Arnheim's claim that two basic interdependent procedures of intelligent cognition are intuition and intellect (1986); and Harry Broudy's (1972)…
ERIC Educational Resources Information Center
O'Neill, John J.
The basic premise of this report is that cable television systems, although currently based on subscriber fees, will eventually obtain their capital structure from advertising revenues. Because of this, the report maintains that market saturation must be the prime consideration, even though several currently common practices go against this and…
Where Are We? Finding a Start Point on the Ethical Map
2013-12-13
selected was Ethics: Discovering Right and Wrong which baselined the discussion by explaining basic moral and ethical premises ( moral relativism ......implicit but inadequately developed in existing PMEE conceptions . iv ACKNOWLEDGMENTS I would like to thank my wife and children for allowing me the
Ito, A
2015-02-01
Differentiation and development of parasites, including longevity in host animals, are thought to be governed by host-parasite interactions. In this review, several topics on the developmental biology of cestode infections are discussed from immunobiological perspective with a focus on Hymenolepis, Taenia and Echinococcus infections. The basic premise of this review is that 'differentiation and development of cestodes' are somehow affected by host immune responses with an evolutionary history. © 2014 John Wiley & Sons Ltd.
Development for Women? The 1981-85 Moroccan Plan Considered.
ERIC Educational Resources Information Center
Howard-Merriam, Kathleen
The approach to improving the socioeconomic condition of women in rural Morocco is based on the premise that the family is the key social unit. Women, as the effective pillars of that unit, will automatically benefit from government sponsored family programs. The Moroccan woman's access to food, water, fuel, medical care, personal safety, and rest…
ERIC Educational Resources Information Center
CAMPBELL, PAUL N.
THE BASIC PREMISE OF THIS BOOK IS THAT LEARNING TO READ ORALLY IS OF FUNDAMENTAL IMPORTANCE TO THOSE WHO WOULD FULLY APPRECIATE OR RESPOND TO LITERATURE. BECAUSE READERS MUST INTERPRET LITERATURE ALWAYS FOR THEMSELVES AND OFTEN FOR AN AUDIENCE, THREE ASPECTS OF ORAL INTERPRETATION ARE EXPLORED--(1) THE CHOICE OF MATERIALS, WHICH REQUIRES AN…
ERIC Educational Resources Information Center
Aleman, Melissa Wood; Aleman, Carlos Galvan
2007-01-01
A basic premise of social approaches to studying communication is that theories of interpersonal communication and personal relationships are reflexively defined, socially constructed, and historically situated. In contrast to the tradition of psychological models of relational processes and message transmission, social approaches encourage…
First, Discover Their Strengths
ERIC Educational Resources Information Center
Armstrong, Thomas
2012-01-01
This article discusses how a neurodiversity perspective can help educators create learning environments in which all students flourish. The basic premise of neurodiversity is that there is no "typical" mental capacity--no "normal" brain to which all other brains are compared--and because this is the case, educators should look at students with…
Oak plantation establishment using mechanical, burning, and herbicide treatments
James H. Miller
1993-01-01
Abstract.Mechanical methods, prescribed burning, and herbicide treatments for establishing oak plantations are reviewed, with emphasis on herbicides. Integrated prescriptions for site preparation using these silvicultural tools are outlined for both clearcut forests and old field sites. The basic premise is that intensive cultural treatments will be...
ERIC Educational Resources Information Center
Cesarini, Paul
2008-01-01
What is network neutrality? The basic premise is that people should have the right to access online, in a free and unfettered manner, any type of content that is not illegal, based on the predetermined speed they are paying their Internet-service provider (ISP) for each month. That is, with network neutrality, the content becomes irrelevant. The…
Alternatives for Man and Environment, Revised Curriculum.
ERIC Educational Resources Information Center
Miami-Dade Junior Coll., FL.
A one-year general education course entitled "Man and Environment" has been developed at Miami-Dade Junior College, Florida. Basic framework for the course was built on the premise that an interdisciplinary, module-structured course represents one of the better approaches to planning environmental education curriculum. Material for the…
HOW TO LEARN AN UNWRITTEN LANGUAGE.
ERIC Educational Resources Information Center
GUDSCHINSKY, SARAH C.
A PRACTICAL GUIDE FOR THE ANTHROPOLOGY STUDENT CONFRONTED WITH LEARNING A LANGUAGE IN THE FIELD, THIS BOOK FOCUSES ON ACQUIRING EVERYDAY CONVERSATION RATHER THAN DIFFICULT LINGUISTIC PROBLEMS. THE FORM AND CONTENT ARE BASED ON THE FOLLOWING BASIC PREMISES--(1) LEARNING A LANGUAGE CONSISTS OF DISCOVERING AND CONTROLLING AS AUTOMATIC HABITS THE…
ERIC Educational Resources Information Center
Mofsky, James S.
1976-01-01
On the premise that corporate counsel must be an able diagnostician before he can focus on highly specialized and interrelated issues of business law, the author suggests an approach to corporate law curriculum in which the basic course balances the quality and quantity of material designed to create the needed sensitivity. (JT)
Study of Rapid-Regression Liquefying Hybrid Rocket Fuels
NASA Technical Reports Server (NTRS)
Zilliac, Greg; DeZilwa, Shane; Karabeyoglu, M. Arif; Cantwell, Brian J.; Castellucci, Paul
2004-01-01
A report describes experiments directed toward the development of paraffin-based hybrid rocket fuels that burn at regression rates greater than those of conventional hybrid rocket fuels like hydroxyl-terminated butadiene. The basic approach followed in this development is to use materials such that a hydrodynamically unstable liquid layer forms on the melting surface of a burning fuel body. Entrainment of droplets from the liquid/gas interface can substantially increase the rate of fuel mass transfer, leading to surface regression faster than can be achieved using conventional fuels. The higher regression rate eliminates the need for the complex multi-port grain structures of conventional solid rocket fuels, making it possible to obtain acceptable performance from single-port structures. The high-regression-rate fuels contain no toxic or otherwise hazardous components and can be shipped commercially as non-hazardous commodities. Among the experiments performed on these fuels were scale-up tests using gaseous oxygen. The data from these tests were found to agree with data from small-scale, low-pressure and low-mass-flux laboratory tests and to confirm the expectation that these fuels would burn at high regression rates, chamber pressures, and mass fluxes representative of full-scale rocket motors.
Developments and Tendencies in Fission Reactor Concepts
NASA Astrophysics Data System (ADS)
Adamov, E. O.; Fuji-Ie, Y.
This chapter describes, in two parts, new-generation nuclear energy systems that are required to be in harmony with nature and to make full use of nuclear resources. The issues of transmutation and containment of radioactive waste will also be addressed. After a short introduction to the first part, Sect. 58.1.2 will detail the requirements these systems must satisfy on the basic premise of peaceful use of nuclear energy. The expected designs themselves are described in Sect. 58.1.3. The subsequent sections discuss various types of advanced reactor systems. Section 58.1.4 deals with the light water reactor (LWR) whose performance is still expected to improve, which would extend its application in the future. The supercritical-water-cooled reactor (SCWR) will also be shortly discussed. Section 58.1.5 is mainly on the high temperature gas-cooled reactor (HTGR), which offers efficient and multipurpose use of nuclear energy. The gas-cooled fast reactor (GFR) is also included. Section 58.1.6 focuses on the sodium-cooled fast reactor (SFR) as a promising concept for advanced nuclear reactors, which may help both to achieve expansion of energy sources and environmental protection thus contributing to the sustainable development of mankind. The molten-salt reactor (MSR) is shortly described in Sect. 58.1.7. The second part of the chapter deals with reactor systems of a new generation, which are now found at the research and development (R&D) stage and in the medium term of 20-30 years can shape up as reliable, economically efficient, and environmentally friendly energy sources. They are viewed as technologies of cardinal importance, capable of resolving the problems of fuel resources, minimizing the quantities of generated radioactive waste and the environmental impacts, and strengthening the regime of nonproliferation of the materials suitable for nuclear weapons production. Particular attention has been given to naturally safe fast reactors with a closed fuel cycle (CFC) - as an advanced and promising reactor system that offers solutions to the above problems. The difference (not confrontation) between the approaches to nuclear power development based on the principles of “inherent safety” and “natural safety” is demonstrated.
Alternative Fuels Data Center: Electricity Fuel Basics
, coal, nuclear energy, hydropower, natural gas, wind energy, solar energy, and stored hydrogen. Plug-in Links Benefits & Considerations Stations Vehicles Laws & Incentives Electricity Fuel Basics
Baron, Julianne L.; Vikram, Amit; Duda, Scott; Stout, Janet E.; Bibby, Kyle
2014-01-01
Drinking water distribution systems, including premise plumbing, contain a diverse microbiological community that may include opportunistic pathogens. On-site supplemental disinfection systems have been proposed as a control method for opportunistic pathogens in premise plumbing. The majority of on-site disinfection systems to date have been installed in hospitals due to the high concentration of opportunistic pathogen susceptible occupants. The installation of on-site supplemental disinfection systems in hospitals allows for evaluation of the impact of on-site disinfection systems on drinking water system microbial ecology prior to widespread application. This study evaluated the impact of supplemental monochloramine on the microbial ecology of a hospital’s hot water system. Samples were taken three months and immediately prior to monochloramine treatment and monthly for the first six months of treatment, and all samples were subjected to high throughput Illumina 16S rRNA region sequencing. The microbial community composition of monochloramine treated samples was dramatically different than the baseline months. There was an immediate shift towards decreased relative abundance of Betaproteobacteria, and increased relative abundance of Firmicutes, Alphaproteobacteria, Gammaproteobacteria, Cyanobacteria and Actinobacteria. Following treatment, microbial populations grouped by sampling location rather than sampling time. Over the course of treatment the relative abundance of certain genera containing opportunistic pathogens and genera containing denitrifying bacteria increased. The results demonstrate the driving influence of supplemental disinfection on premise plumbing microbial ecology and suggest the value of further investigation into the overall effects of premise plumbing disinfection strategies on microbial ecology and not solely specific target microorganisms. PMID:25033448
Baron, Julianne L; Vikram, Amit; Duda, Scott; Stout, Janet E; Bibby, Kyle
2014-01-01
Drinking water distribution systems, including premise plumbing, contain a diverse microbiological community that may include opportunistic pathogens. On-site supplemental disinfection systems have been proposed as a control method for opportunistic pathogens in premise plumbing. The majority of on-site disinfection systems to date have been installed in hospitals due to the high concentration of opportunistic pathogen susceptible occupants. The installation of on-site supplemental disinfection systems in hospitals allows for evaluation of the impact of on-site disinfection systems on drinking water system microbial ecology prior to widespread application. This study evaluated the impact of supplemental monochloramine on the microbial ecology of a hospital's hot water system. Samples were taken three months and immediately prior to monochloramine treatment and monthly for the first six months of treatment, and all samples were subjected to high throughput Illumina 16S rRNA region sequencing. The microbial community composition of monochloramine treated samples was dramatically different than the baseline months. There was an immediate shift towards decreased relative abundance of Betaproteobacteria, and increased relative abundance of Firmicutes, Alphaproteobacteria, Gammaproteobacteria, Cyanobacteria and Actinobacteria. Following treatment, microbial populations grouped by sampling location rather than sampling time. Over the course of treatment the relative abundance of certain genera containing opportunistic pathogens and genera containing denitrifying bacteria increased. The results demonstrate the driving influence of supplemental disinfection on premise plumbing microbial ecology and suggest the value of further investigation into the overall effects of premise plumbing disinfection strategies on microbial ecology and not solely specific target microorganisms.
Estimated United States Residential Energy Use in 2005
DOE Office of Scientific and Technical Information (OSTI.GOV)
Smith, C A; Johnson, D M; Simon, A J
2011-12-12
A flow chart depicting energy flow in the residential sector of the United States economy in 2005 has been constructed from publicly available data and estimates of national energy use patterns. Approximately 11,000 trillion British Thermal Units (trBTUs) of electricity and fuels were used throughout the United States residential sector in lighting, electronics, air conditioning, space heating, water heating, washing appliances, cooking appliances, refrigerators, and other appliances. The residential sector is powered mainly by electricity and natural gas. Other fuels used include petroleum products (fuel oil, liquefied petroleum gas and kerosene), biomass (wood), and on-premises solar, wind, and geothermal energy.more » The flow patterns represent a comprehensive systems view of energy used within the residential sector.« less
Pritchard, G C; Smith, R; Ellis-Iversen, J; Cheasty, T; Willshaw, G A
2009-05-02
At the request of the public health authorities, 31 public amenity premises in England and Wales containing animals of various species were investigated for the presence of verocytotoxigenic Escherichia coli (VTEC) O157 between 1997 and 2007, because of putative associations with human cases. VTEC O157 was confirmed in one or more species on 19 (61.3 per cent) of the premises. There were significant associations between the presence of VTEC O157 and the number of species sampled, the size of the enterprise, the presence of young cattle and the presence of adult pigs. E coli O157 was isolated from 305 (17.8 per cent) of 1715 samples taken from all the premises, and verocytotoxin genes were detected by PCR in 184 (98.4 per cent) of 187 representative isolates. On positive premises, the highest mean proportion of positive samples (29.0 per cent) was in cattle, followed by sheep (24.4 per cent), donkeys (14.6 per cent), pigs (14.3 per cent), horses (12.3 per cent) and goats (9.9 per cent). A high proportion of positive samples was obtained from camelid species sampled on three of the premises. The main phage types (PT) were 2 and 21/28, which were those most commonly isolated from human cases during the same period. A single PT was detected on 14 of the 19 positive premises, with up to six different species having the same PT.
Distance Learning: A Strategy for Improving Incontinence Care in Nursing Homes
ERIC Educational Resources Information Center
Rahman, Anna N.; Schnelle, John F.; Yamashita, Takashi; Patry, Gail; Prasauskas, Ruta
2010-01-01
Purpose: This article describes a distance learning model designed to help nursing homes implement incontinence management best practices. A basic premise is that translating research into practice requires both a feasible intervention and a dissemination strategy responsive to the target audience's needs. Design and Methods: Over 8 months, nurse…
Integrative Problem-Centered Therapy: Toward the Synthesis of Family and Individual Psychotherapies.
ERIC Educational Resources Information Center
Pinsof, William M.
1983-01-01
Presents an overview of the Integrative Problem-Centered Therapy (IPCT) Model, and describes its core principles and premises, and basic methodological steps. The IPCT provides a technique for applying individual and family therapy and behavioral, communicational, and psychodynamic orientations to client problems. Its goal is to create efficient…
What Makes an "Effective" Leader: The Application of Leadership
ERIC Educational Resources Information Center
Notar, Charles E.; Uline, Carol S.; Eady, Charlotte King
2008-01-01
This article is based on the premise that leadership is leadership, whatever the profession. A number of "leaders" from various enterprises are discussed to determine the basic tenets of leadership. The nine tenets of leadership are: (1) Think and Act Strategically. (2) Understand and Demonstrate the Elements of Teams and Teamwork. (3)…
ERIC Educational Resources Information Center
Jenkins, Jacquelyn W.; Shaul, Nancy Pera
The program described in this paper was based upon the premise that the activity of cooking in the classroom is an excellent way of integrating all areas of learning and a very useful reading vehicle. Through cooking activities and related field trips, children can add to both their knowledge in basic subject areas and their motor skills as well…
ERIC Educational Resources Information Center
Snell, Joel C.; Marsh, Mitchell
2011-01-01
The authors have over the years tried to revise meta-analysis because it's basic premise is to add apples and oranges together and analyze. In other words, various data on the same subject are chosen using different samples, research strategies, and number properties. The findings are then homogenized and a statistical analysis is used (Snell, J.…
ERIC Educational Resources Information Center
McMurtry, John
1997-01-01
Criticizes some of the basic principles expounded in John Locke's "Second Treatise on Government." Argues that Locke's ideas on private property, capital investment, and social good are inherently contradictory. Asserts that the market theory of property inevitably leads to endemic economic exploitation and oppression. (MJP)
ERIC Educational Resources Information Center
Library of Congress, Washington, DC. Copyright Office.
The first meeting of the National Commission on New Technological Uses of Copyrighted Works (CONTU) established some basic premises and procedures. Commissioners representing various interests concerned with copyright legislation (librarians, publishers, consumers and lawyers) discussed the responsibility of the Commission to review copyright…
Opportunity Knocked Out: Reducing Cheating by Teachers on Student Tests.
ERIC Educational Resources Information Center
Ligon, Glynn
Careful management of a testing program can greatly limit a teacher's opportunity to cheat while administering standardized tests to students and can increase the likelihood that such cheating will be detected. The Austin Independent School District's systemwide testing staff's plan for controlling cheating has three basic premises: (1) plan and…
Implementing Structured English Immersion in Arizona: Benefits, Challenges, and Opportunities
ERIC Educational Resources Information Center
Rios-Aguilar, Cecilia; Gonzalez Canche, Manuel S.; Moll, Luis C.
2012-01-01
Background/Context: Arizona's most recent English Language Learner (ELL) legislation, starting in the school year 2008-2009, requires all such students be educated through a specific Structured English Immersion (SEI) model: the 4-hour English Language Development (ELD) block. The basic premise behind this particular model is that ELL students…
Key Characteristics of Successful Science Learning: The Promise of Learning by Modelling
ERIC Educational Resources Information Center
Mulder, Yvonne G.; Lazonder, Ard W.; de Jong, Ton
2015-01-01
The basic premise underlying this research is that scientific phenomena are best learned by creating an external representation that complies with the complex and dynamic nature of such phenomena. Effective representations are assumed to incorporate three key characteristics: they are graphical, dynamic, and provide a pre-specified outline of the…
Re-Articulating the Mission and Work of the Writing Program with Digital Video
ERIC Educational Resources Information Center
Kopp, Drew; Stevens, Sharon McKenzie
2010-01-01
In this webtext, we discuss one powerful way that writing program administrators (WPAs) can start to reshape their basic rhetorical situation, potentially shifting the underlying premises that external audiences bring to discussions about writing instruction. We argue that digital video, when used strategically, is a particularly valuable medium…
Musical Improvisation as Action: An Arendtian Perspective
ERIC Educational Resources Information Center
Kanellopoulos, Panagiotis
2007-01-01
A basic premise of this essay is that music education practice is a form of--a broadly conceived notion of--political practice insofar as it creates situations where specific meanings are produced, attitudes built, identities shaped, and hierarchies of musical and social values constructed. Every music education practice expresses, and at the same…
Does Sex of Dyad Members Really Matter? A Review of Leader-Member Exchange
ERIC Educational Resources Information Center
Goertzen, Brent J.; Fritz, Susan M.
2004-01-01
Leader-member exchange (LMX) generally refers to the leadership process centered on the interactions between leaders and direct reports. The basic premise of high quality leader-member exchange relationships holds that direct reports gain tremendous benefits through these partnerships. LMX is perhaps the most commonly researched theory of…
Neuro-Linguistic Programming: Developing Effective Communication in the Classroom.
ERIC Educational Resources Information Center
Torres, Cresencio; Katz, Judy H.
Neuro-Linguistic Programming (NLP) is a method that teachers can use to increase their communication effectiveness by matching their communication patterns with those of their students. The basic premise of NLP is that people operate and make sense of their experience through information received from the world around them. This information is…
Learning for the Common Good: Liberal Education, Civic Education, and Teaching about Philanthropy.
ERIC Educational Resources Information Center
Jeavons, Thomas
This monograph reports on a curriculum development program sponsored by the Association of American Colleges (AAC) which supported the creation and delivery of undergraduate liberal arts courses about philanthropy. The discussion begins with three basic premises: (1) that American institutions of higher education in recent years have not given…
Music, Music Education, and Institutional Ideology: A Praxial Philosophy of Musical Sociality
ERIC Educational Resources Information Center
Regelski, Thomas A.
2016-01-01
Music is a human action (praxis), guided by intentionality, that embodies sociality. The many significant "social" values of music, however, get lost in high-minded but faulty claims that music's essential value is to promote aesthetic experience. A survey of some basic aesthetic premises demonstrates that claims for "proper"…
Can Restorative Practices in Schools Make a Difference?
ERIC Educational Resources Information Center
McCluskey, Gillean; Lloyd, Gwynedd; Kane, Jean; Riddell, Sheila; Stead, Joan; Weedon, Elisabet
2008-01-01
Schools in the UK looking for solutions to concerns about indiscipline have been enthused by the basic premise of restorative practice; the need to restore good relationships when there has been conflict or harm; and develop a school ethos, policies and procedures that reduce the possibilities of such conflict and harm arising. In 2004 the…
Tailoring Consultation in Organization Development for Particular Schools. An Occasional Paper.
ERIC Educational Resources Information Center
Schmuck, Richard; And Others
This paper discusses characteristics of school organizations and strategies of organization development (OD) consultation as they relate to organizational change in schools. The basic premise of the paper is that any OD intervention in a school should be a somewhat unique series of events specifically tailored to the needs and characteristics of…
Positive Psychology and Character Strengths: Application to Strengths-Based School Counseling
ERIC Educational Resources Information Center
Park, Nansook; Peterson, Christopher
2008-01-01
The basic premise of positive psychology is that the happiness and fulfillment of children and youth entail more than the identification and treatment of their problems. This article provides an overview of positive psychology and the Values in Action (VIA) project that classifies and measures 24 widely recognized character strengths. Good…
Prosecution: An Effective Response to Child Abuse.
ERIC Educational Resources Information Center
Harshbarger, Scott
A district attorney of Middlesex County, Massachusetts, argues that prosecution is the most effective and appropriate response to child abuse cases. Two basic premises are advanced. First, anyone who physically abuses, sexually assaults, or rapes a child has committed a serious crime, regardless of the relationship of the victim to the offender.…
Idea Bank: Duct Tape Note Twister
ERIC Educational Resources Information Center
McHenry, Molly
2008-01-01
In this article, the author relates how she observed a middle school math teacher deliver a miserable class. She realized that she did the same thing to her music students. To engage her students, she developed "Note Twister," a music reading game using duct tape to form musical notes and the basic premise behind the game,…
The Relation between Balanced Need Satisfaction and Adolescents' Motivation in Physical Education
ERIC Educational Resources Information Center
Mouratidis, Athanasios; Barkoukis, Vassilis; Tsorbatzoudis, Charalambos
2015-01-01
Self-determination theory posits that satisfaction of the needs for autonomy, competence and relatedness represents the basic nutriments for humans' optimal functioning. It also postulates that with greater the degree to which these three needs are equally satisfied, the quality of motivation is further enhanced. Yet, this premise has remained…
Motor Education: Educational Development Programs.
ERIC Educational Resources Information Center
Tansley, A. E.
This booklet presents educational programs and activities focusing on motor skills for 5- to 9-year-old children and older children with learning problems. The premise of the activities is that the acquisition of motor skills is essential to basic learning. The role of language as a mediator and controller of motor development is emphasized. The…
Basics without Boredom? With Imagination, Yes!
ERIC Educational Resources Information Center
Hunter, Florence
On the premise that the aim of high school and college English teachers is to intensify students' powers of thinking and feeling and to keep themselves alive while doing so, this paper suggests numerous imaginative activities for use in the classroom. The activities include a Victorian panel discussion, a presentation of early English ballads,…
ERIC Educational Resources Information Center
Katz, Lynda J.
This report provides an overview of career counseling in vocational rehabilitation programming for individuals with severe psychiatric disabilities. It begins by reviewing the five basic premises for vocational counseling and programming and then discusses how adaptations to the traditional practice of career and vocational counseling might be…
A Is for Assessment: The Other Scarlet Letter
ERIC Educational Resources Information Center
Halpern, Diane F.
2013-01-01
This is a personalized review of programs designed to assess student learning outcomes (SLOs) in higher education. In the last 30+ years, there have been few changes in the basic principles and premises. We assess SLOs for the purpose of improving teaching and learning. Although content area knowledge is important, other goals such as enhancing…
IQ Scores Should Not Be Adjusted for the Flynn Effect in Capital Punishment Cases
ERIC Educational Resources Information Center
Hagan, Leigh D.; Drogin, Eric Y.; Guilmette, Thomas J.
2010-01-01
"Atkins v. Virginia" (2002) dramatically raised the stakes for mental retardation in capital punishment cases, but neither defined this condition nor imposed uniform standards for its assessment. The basic premise that mean IQ scores shift over time enjoys wide recognition, but its application--including the appropriateness of…
Cavity temperature and flow characteristics in a gas-core test reactor
NASA Technical Reports Server (NTRS)
Putre, H. A.
1973-01-01
A test reactor concept for conducting basic studies on a fissioning uranium plasma and for testing various gas-core reactor concepts is analyzed. The test reactor consists of a conventional fuel-element region surrounding a 61-cm-(2-ft-) diameter cavity region which contains the plasma experiment. The fuel elements provide the neutron flux for the cavity region. The design operating conditions include 60-MW reactor power, 2.7-MW cavity power, 200-atm cavity pressure, and an average uranium plasma temperature of 15,000 K. The analytical results are given for cavity radiant heat transfer, hydrogen transpiration cooling, and uranium wire or powder injection.
Alternative Fuels Characterization | Transportation Research | NREL
. Research at NREL focuses on the basic properties of these fuels and what levels of oxygen can be tolerated conventional cars and on understanding the performance of flex-fuel vehicles that can operate on ethanol levels basic properties of these fuels, as well as determining what levels of oxygen can be tolerated in drop
NASA Technical Reports Server (NTRS)
Kimble, Michael C.; Anderson, Everett B.; Jayne, Karen D.; Woodman, Alan S.
2004-01-01
Micro-tubular fuel cells that would operate at power levels on the order of hundreds of watts or less are under development as alternatives to batteries in numerous products - portable power tools, cellular telephones, laptop computers, portable television receivers, and small robotic vehicles, to name a few examples. Micro-tubular fuel cells exploit advances in the art of proton-exchange-membrane fuel cells. The main advantage of the micro-tubular fuel cells over the plate-and-frame fuel cells would be higher power densities: Whereas the mass and volume power densities of low-pressure hydrogen-and-oxygen-fuel plate-and-frame fuel cells designed to operate in the targeted power range are typically less than 0.1 W/g and 0.1 kW/L, micro-tubular fuel cells are expected to reach power densities much greater than 1 W/g and 1 kW/L. Because of their higher power densities, micro-tubular fuel cells would be better for powering portable equipment, and would be better suited to applications in which there are requirements for modularity to simplify maintenance or to facilitate scaling to higher power levels. The development of PEMFCs has conventionally focused on producing large stacks of cells that operate at typical power levels >5 kW. The usual approach taken to developing lower-power PEMFCs for applications like those listed above has been to simply shrink the basic plate-and-frame configuration to smaller dimensions. A conventional plate-and-frame fuel cell contains a membrane/electrode assembly in the form of a flat membrane with electrodes of the same active area bonded to both faces. In order to provide reactants to both electrodes, bipolar plates that contain flow passages are placed on both electrodes. The mass and volume overhead of the bipolar plates amounts to about 75 percent of the total mass and volume of a fuel-cell stack. Removing these bipolar plates in the micro-tubular fuel cell significantly increases the power density.
ERIC Educational Resources Information Center
Yoon, Susan A.; Klopfer, Eric
2006-01-01
This paper reports on the efficacy of a professional development framework premised on four complex systems design principles: Feedback, Adaptation, Network Growth and Self-organization (FANS). The framework is applied to the design and delivery of the first 2 years of a 3-year study aimed at improving teacher and student understanding of…
ERIC Educational Resources Information Center
Simien, Ki Eisha
2017-01-01
The purpose of this basic qualitative study was to uncover and understand secondary general school educators' experiences and perspectives in readiness in meeting the needs of high functioning autism spectrum disorder (HFASD) learners within the inclusive teaching environment. The research question served as the foundational premise of the…
Equality of Educational Opportunity: A Handbook for Research.
ERIC Educational Resources Information Center
Miller, LaMar P., Ed.; Gordon, Edmund W., Ed.
The content of this book is embedded in two historical frameworks. The first is the history of American education in which the basic underlying premise is that education is a means of achieving equality in our society. The other is the development of educational research in the United States which was founded on a deep conviction that one could…
Strategic Management of Electronic Commerce: An Adaptation of the Balanced Scorecard.
ERIC Educational Resources Information Center
Hasan, Helen; Tibbits, Hendrika
2000-01-01
The balanced scorecard is a formal management technique built on the premise that measurement is a prerequisite to strategic management. A case study of the implementation of the balanced scorecard in a public utility is analyzed to suggest how the basic concepts and philosophy of the balanced scorecard can be retained in its adaptation to the…
Adapting Technology for School Improvement: A Global Perspective
ERIC Educational Resources Information Center
Chapman, David W., Ed.; Mahlck, Lars O., Ed.
2004-01-01
This book presents a compilation of articles based on the premise that the move to advanced technology use in primary and secondary schools offers great hope for improving the access, quality, and efficiency of basic education. The aim of the book is to identify and examine how information technologies can be, and are being, used to strengthen the…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fedorov, M. V., E-mail: fedorov@gmail.com
2016-03-15
Basic premises, approximations, and results of L.V. Keldysh’s 1964 work on multiphoton ionization of atoms are discussed, as well as its influence on the modern science of the interaction of atomic–molecular systems with a strong laser field.
A Preliminary Outcome Study of an Outpatient Treatment Program for Gamblers.
ERIC Educational Resources Information Center
Blackman, Sheldon; And Others
The Gamblers Treatment Clinic (GTC) opened in 1982 as a New York State Office of Mental Health Demonstration Program. The basic premise of the GTC is that excessive gambling is a disorder of impulse control. Treatment, conducted in the community in a time-limited fashion, attempts to uncover the underlying dynamics that precipitate disorders of…
Improving Student Achievement through a Systematic Instructional Monitoring Plan.
ERIC Educational Resources Information Center
Mahan, David J.
Based on four very basic but important premises, the Instructional Monitoring Plan has resulted in significant learning gains by middle school students in the St. Louis (Missouri) public school system. First, the staff must define what is to be taught by the teacher and learned by the students. Second, all faculty members must be aware of the…
Context for Education in the Seventies.
ERIC Educational Resources Information Center
Harman, Willis W.
Three forces are pushing man toward a drastic shift in cultural values and basic premises. These are: 1) the existence of a world macroproblem which requires such a shift for its solution; 2) the "great refusal" of youth to go along with the values of the past; and 3) the questioning within science as to whether its classical "value-free" stance…
An Introduction to Annuity, Charitable Remainder Trust, and Bequest Programs. Second Edition.
ERIC Educational Resources Information Center
Dunseth, William B.
Information on annuity, charitable remainder trust, and bequest programs is presented. Attention is directed to the growth and basic premises of annuity and life income plans and the question of why an institution should include annuities and charitable trusts in a development program. The various types of plans and gifts and the tax advantages of…
Human Rights and Cosmopolitan Democratic Education
ERIC Educational Resources Information Center
Snauwaert, Dale T.
2009-01-01
The foundation upon which this discussion is based is the basic nature of democracy as both a political and moral ideal. Democracy can be understood as a system of rights premised upon the logic of equality. At its core is a fundamental belief in moral equality, a belief that all human beings possess an equal inherent dignity or worth. The ideal…
Implications of a Moral Science.
ERIC Educational Resources Information Center
Kantor, Robert E.
A research memorandum presents the results of an on-going study into the implications of a moral science. Adopting a moral stance in scientific investigation would entail the abandonment of analytic modes of inquiry for more holistic, open-ended ones. The basic premise of a moral science is that it is possible for men to reach agreement on what is…
The Relentless Search for Effects of Divorce: Forging New Trails or Tumbling down the Beaten Path?
ERIC Educational Resources Information Center
Demo, David H.
1993-01-01
Responds to previous article by Amato on children's adjustment to divorce. Cites number of serious limitations including problems in language and logic of hypothesis-testing, in derivation of hypotheses, and in interpretation and assessment of accumulated evidence. Finds Amato's basic premise--that children of divorce suffer lifelong adjustment…
Creativity through a Rhetorical Lens: Implications for Schooling, Literacy and Media Education
ERIC Educational Resources Information Center
Banaji, Shakuntala; Burn, Andrew
2007-01-01
This article, which is speculative in outlook and emerges from an extended literature review on this subject, takes as its basic premise the notion that the idea of "creativity"--whether in relation to literacy, schooling or the economy, is constructed as a series of rhetorical claims. These rhetorics of creativity emerge from the contexts of…
The Pitch: How To Analyze Ads. 2nd Edition.
ERIC Educational Resources Information Center
Rank, Hugh
This book probes the ways ads persuade people to purchase, and attempts to teach individuals to become more discerning consumers. Critical thinking, when applied to analyzing ads, benefits consumers by helping them recognize patterns of persuasion and sort incoming information in order to get to the hidden message. The book s basic premise is that…
ERIC Educational Resources Information Center
Mills Campbell, Dawn
2017-01-01
Resource dependence has been evidenced among private HBCUs that obtain as much as 90% of operating revenue from tuition and fees. Without alternative funding strategies in place, small declines in enrollment can lead to a major budget crisis. The basic premise of this exploratory inquiry was that fundraising represents an opportunity that has been…
Pay Equity Activity in the Public Sector: 1979-1989. Full Report.
ERIC Educational Resources Information Center
National Committee on Pay Equity, Washington, DC.
Pay equity, sometimes referred to as comparable worth, is a remedy for wage discrimination based on race or sex. It's basic premise is that pay should be based on job-related factors such as skill, effort, responsibility and working conditions, not on a worker's gender or race. Studies have consistently demonstrated that jobs predominantly held by…
DOE Office of Scientific and Technical Information (OSTI.GOV)
MacLachlan, J.A.
The basic premises of the conceptual design for the linac upgrade are pursued to establish lengths, gradients, power dissipation, etc., for the 400 MeV linac and matching section. The discussion is limited to accelerating and focusing components. Wherever values depend on the choice of the accelerating structure, the disk-and-washer structure is emphasized; the results are generally relevant to the side coupled cavity choice also.
ERIC Educational Resources Information Center
Aguilar Cortés, Carlos Eduardo; Alzate B., Nelson Eduardo
2015-01-01
This paper presents a set of ideas about the basics for developing interdisciplinary dialogues between content (science) and language (English) in bilingual educational processes, under the premise that a satisfactory relationship between those elements help guarantee successful content-based instruction (CBI) in its form known as "sheltered…
Evaluating the Validity of Systematic Reviews to Identify Empirically Supported Treatments
ERIC Educational Resources Information Center
Slocum, Timothy A.; Detrich, Ronnie; Spencer, Trina D.
2012-01-01
The "best available evidence" is one of the three basic inputs into evidence-based practice. This paper sets out a framework for evaluating the quality of systematic reviews that are intended to identify empirically supported interventions as a way of summarizing the best available evidence. The premise of this paper is that the process of…
ERIC Educational Resources Information Center
van Schalkwyk, Gertina J.
2010-01-01
A basic premise in narrative therapy and inquiry is that life story telling is a mechanism by which experiences are rendered meaningful within some form of structure. However, narrative inquiry has to take cognisance of difficulties ensuing from discursive practices for different populations when eliciting their life stories. In this article I…
The Effect of Selected "Desirable Difficulties" on the Ability to Recall Anatomy Information
ERIC Educational Resources Information Center
Dobson, John L.; Linderholm, Tracy
2015-01-01
"Desirable difficulties" is a theory from cognitive science used to promote learning in a variety of contexts. The basic premise is that creating a cognitively challenging environment at the learning acquisition phase, by actively engaging learners in the retrieval of to-be-learned materials, promotes long-term retention. In this study,…
Forward-Chaining Versus A Graph Approach As The Inference Engine In Expert Systems
NASA Astrophysics Data System (ADS)
Neapolitan, Richard E.
1986-03-01
Rule-based expert systems are those in which a certain number of IF-THEN rules are assumed to be true. Based on the verity of some assertions, the rules deduce as many new conclusions as possible. A standard technique used to make these deductions is forward-chaining. In forward-chaining, the program or 'inference engine' cycles through the rules. At each rule, the premises for the rule are checked against the current true assertions. If all the premises are found, the conclusion is added to the list of true assertions. At that point it is necessary to start over at the first rule, since the new conclusion may be a premise in a rule already checked. Therefore, each time a new conclusion is deduced it is necessary to start the rule checking procedure over. This process continues until no new conclusions are added and the end of the list of rules is reached. The above process, although quite costly in terms of CPU cycles due to the necessity of repeatedly starting the process over, is necessary if the rules contain 'pattern variables'. An example of such a rule is, 'IF X IS A BACTERIA, THEN X CAN BE TREATED WITH ANTIBIOTICS'. Since the rule can lead to conclusions for many values of X, it is necessary to check each premise in the rule against every true assertion producing an association list to be used in the checking of the next premise. However, if the rule does not contain variable data, as is the case in many current expert systems, then a rule can lead to only one conclusion. In this case, the rules can be stored in a graph, and the true assertions in an assertion list. The assertion list is traversed only once; at each assertion a premise is triggered in all the rules which have that assertion as a premise. When all premises for a rule trigger, the rule's conclusion is added to the END of the list of assertions. It must be added at the end so that it will eventually be used to make further deductions. In the current paper, the two methods are described in detail, the relative advantages of each is discussed, and a benchmark comparing the CPU cycles consumed by each is included. It is also shown that, in the case of reasoning under uncertainty, it is possible to properly combine the certainties derived from rules arguing for the same conclusion when the graph approach is used.
NASA Astrophysics Data System (ADS)
Kala, J.; Bajer, M.; Barnat, J.; Smutný, J.
2010-12-01
Pedestrian-induced vibrations are a criterion for serviceability. This loading is significant for light-weight footbridge structures, but was established as a basic loading for the ceilings of various ordinary buildings. Wide variations of this action exist. To verify the different conclusions of various authors, vertical pressure measurements invoked during walking were performed. In the article the approaches of different design codes are also shown.
Favier, Charly; Degallier, Nicolas; Vilarinhos, Paulo de Tarso Ribeiro; de Carvalho, Maria do Socorro Laurentino; Yoshizawa, Maria Amelia Cavalcanti; Knox, Monique Britto
2006-07-01
To determine the influence of climate and of environmental vector control with or without insecticide on Aedes aegypti larval indices and pupae density. An 18-month longitudinal survey of infestation of Ae. aegypti immature stages was conducted for the 1015 residences (premises) of Vila Planalto, an area of Brasilia where the Breteau Index was about 40 before the study. This area was divided into five zones: a control zone with environmental management alone and four zones with insecticide treatment (methoprene, Bti, temephos). We tested for significant differences between infestation levels in the control and insecticide-treated areas, for relationships between climatic variables and larval indices, and to determine risk factors of infestation for certain types of premises and containers. Environmental vector control strategies dramatically decreased infestation in the five areas. No significant differences could be detected between control strategies with insecticide and without. Some premises and container types were particularly suitable for breeding. The influence of climate on the emergence of Ae. aegypti adults for the area is described. In a moderately infested area such as Brasilia, insecticides do not improve environmental vector control. Rather, infestations could be further reduced by focusing on residences and containers particularly at risk. The nature of the link between climate and larval population should be investigated in larger-scale studies before being used in forecasting models.
Class and Home Problems: Carbon Dioxide Capture from Coal-Fired Power Plants Using Calcium Looping
ERIC Educational Resources Information Center
Deshpande, Niranjani; Phalak, Nihar; Fan, Liang-Shih; Sundaresan, Sankaran
2015-01-01
Calcium looping is based on the simple premise of the reversible reaction between CO[subscript 2] and CaO. This reaction can be used for separation of CO2 from a mixture of gases; most notably the technology finds applications in CO[subscript 2] removal from gas streams in fossil fuel-based energy systems. This article gives a brief overview of…
2007-12-01
Ventilation, and Air Conditioning IED Improvised Explosive Device IG DoD Inspector General, Department of Defense IGA Investment Grade Audit JLTV...that certain energy efficient improvements will be achieved (Hansen, 2003). Investment Grade Audit (IGA). Based on the premise that energy...low- grade propane; and a modified diesel engine that can burn gas, ethanol, and diesel fuel in variable proportions (Hamilton, 2007). The TGER
The basic features of a closed fuel cycle without fast reactors
NASA Astrophysics Data System (ADS)
Bobrov, E. A.; Alekseev, P. N.; Teplov, P. S.
2017-01-01
In this paper the basic features of a closed fuel cycle with thermal reactors are considered. The three variants of multiple Pu and U recycling in VVER reactors was investigated. The comparison of MOX and REMIX fuel approaches for closed fuel cycle with thermal reactors is presented. All variants make possible to recycle several times the total amount of Pu and U obtained from spent fuel. The reported study was funded by RFBR according to the research project № 16-38-00021
Basic and Applied Materials Science Research Efforts at MSFC Germane to NASA Goals
NASA Technical Reports Server (NTRS)
2003-01-01
Presently, a number of investigations are ongoing that blend basic research with engineering applications in support of NASA goals. These include (1) "Pore Formation and Mobility (PFMI) " An ISS Glovebox Investigation" NASA Selected Project - 400-34-3D; (2) "Interactions Between Rotating Bodies" Center Director's Discretionary Fund (CDDF) Project - 279-62-00-16; (3) "Molybdenum - Rhenium (Mo-Re) Alloys for Nuclear Fuel Containment" TD Collaboration - 800-11-02; (4) "Fabrication of Alumina - Metal Composites for Propulsion Components" ED Collaboration - 090-50-10; (5) "Radiation Shielding for Deep-Space Missions" SD Effort; (6) "Other Research". In brief, "Pore Formation and Mobility" is an experiment to be conducted in the ISS Microgravity Science Glovebox that will systematically investigate the development, movement, and interactions of bubbles (porosity) during the controlled directional solidification of a transparent material. In addition to promoting our general knowledge of porosity physics, this work will serve as a guide to future ISS experiments utilizing metal alloys. "Interactions Between Rotating Bodies" is a CDDF sponsored project that is critically examining, through theory and experiment, claims of "new" physics relating to gravity modification and electric field effects. "Molybdenum - Rhenium Alloys for Nuclear Fuel Containment" is a TD collaboration in support of nuclear propulsion. Mo-Re alloys are being evaluated and developed for nuclear fuel containment. "Fabrication of Alumina - Metal Composites for Propulsion Components" is an ED collaboration with the intent of increasing strength and decreasing weight of metal engine components through the incorporation of nanometer-sized alumina fibers. "Radiation Shielding for Deep-Space Missions" is an SD effort aimed at minimizing the health risk from radiation to human space voyagers; work to date has been primarily programmatic but experiments to develop hydrogen-rich materials for shielding are planned. "Other Research" includes: BUNDLE (Bridgman Unidirectional Dendrite in a Liquid Experiment) activities (primarily crucible development), vibrational float-zone processing (with Vanderbilt University), use of ultrasonics in materials processing (with UAH), rotational effects on microstructural development, and application of magnetic fields for mixing.
ERIC Educational Resources Information Center
Bunch, Gary
2006-01-01
This book is a resource for teachers who have the opportunity and the responsibility to work with students who have been labeled with intellectual challenges. The fundamental premise is that good teaching is good teaching--for all students. Secondly, this book believes that teachers are good professionals and have both the skills and the spirit to…
It's the Quality Not the Quantity of Ties That Matters: Social Networks and Self-Efficacy Beliefs
ERIC Educational Resources Information Center
Siciliano, Michael D.
2016-01-01
This study explores the role of knowledge access and peer influence as mechanisms by which networks may shape teacher self-efficacy. The basic premise is twofold: (a) that peer interaction provides opportunities to access teaching relevant knowledge and thus may reduce uncertainty and (b) that self-efficacy beliefs may be shaped by the efficacy…
ERIC Educational Resources Information Center
Brubaker, Dale L.; Nelson, Roland H., Jr.
A basic premise of this essay is that educational organizations perform certain functions for students in order to attain purposes, goals, and objectives, and in turn these functions influence what social studies educators can and cannot do in curriculum and instruction. It is argued that teachers of the social studies must learn about the…
An Opportunity to Learn US History: What NAEP Data Suggest Regarding the Opportunity Gap
ERIC Educational Resources Information Center
Heafner, Tina L.; Fitchett, Paul G.
2015-01-01
The purpose of this study is to determine the degree to which Opportunity to Learn (OTL), is associated with students' achievement in US History. Opportunity to Learn stems from the basic premise that there is an important relationship between the quality and frequency of classroom instruction and students' levels of academic success. The authors…
Reality Therapy in a Middle School Setting: Altering a Student's Perception
ERIC Educational Resources Information Center
Mabeus, Danielle; Rowland, Karen D.
2016-01-01
Reality Therapy is a form of brief therapy that is applicable in the school setting and is derived from William Glasser's Choice Theory (Banks, 2009). The basic premise of Choice Theory is that individuals are the masters of their own choices and they alone are responsible for their choices and behaviors. Choice theory states that each person is…
Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?
ERIC Educational Resources Information Center
Ghassib, Hisham B.
2010-01-01
The basic premise of this paper is the fact that science has become a major industry: the knowledge industry. The paper throws some light on the reasons for the transformation of science from a limited, constrained and marginal craft into a major industry. It, then, presents a productivist industrial model of knowledge production, which shows its…
Trainer Talk in Post-Observation Feedback Sessions: An Exploration of Scaffolding
ERIC Educational Resources Information Center
Engin, Marion
2015-01-01
Learning takes place in a particular social context and in interaction with others. One of the tools of mediation between the learner and the subject to be learned is talk. In a teacher training context, it is through the use of particular talk that trainers can guide and scaffold their trainees towards learning, and the basic premise is that…
Easy To Love, Difficult To Discipline: The Seven Basic Skills for Turning Conflict into Cooperation.
ERIC Educational Resources Information Center
Bailey, Becky A.
Based on the view that parents discipline their children in the same way they discipline themselves, this book helps parents become aware of how they treat themselves and presents a framework called loving guidance. Chapter 1 introduces the framework built on the premise that parents' perceptions dictate their actions such that to change behavior,…
ERIC Educational Resources Information Center
van der Lans, Rikkert M.; van de Grift, Wim J. C. M.; van Veen, K.
2018-01-01
This study connects descriptions of effective teaching with descriptions of teacher development to advance an initial understanding of how effective teaching may develop. The study's main premise is that descriptions of effective teaching develop cumulatively where more basic teaching strategies and behaviors are required before teachers may…
1998-10-01
The efficient design of a free play , 24 hour per day, operational test (OT) of an ASW search system remains a challenge to the OT community. It will...efficient, realistic, free play , 24 hour per day OT. The basic test control premise described here is to stop the test event if the time without a
ERIC Educational Resources Information Center
Benton, Morgan C.
2008-01-01
This dissertation sought to answer the question: Is it possible to build a software tool that will allow teachers to write better multiple-choice questions? The thesis proceeded from the finding that the quality of teaching is very influential in the amount that students learn. A basic premise of this research, then, is that improving teachers…
ERIC Educational Resources Information Center
Reay, Diane
2011-01-01
This short paper is a response to Nel Noddings's article on schooling for democracy. Whilst agreeing with the basic premises of Noddings's argument, it questions the possibility of parity between academic and vocational tracks given the inequitable social and educational contexts the two types of learning would have to coexist within. Drawing on…
Cassandra Moseley; Susan Charnley
2014-01-01
This paper examines micro-processes of institutionalization, using the case of stewardship contracting within the US Forest Service. Our basic premise is that, until a new policy becomes an everyday practice among local actors, it will not become institutionalized at the macro-scale. We find that micro-processes of institutionalization are driven by a mixture of large-...
An Attempt to Quantify the Economic Benefits of Scientific Research, Science Policy Studies No. 4.
ERIC Educational Resources Information Center
Byatt, I. C. R.; Cohen, A. V.
This paper presents a possible methodology for measuring and predicting the future course of the long-range economic benefits of "curiosity-oriented" research. The basic premise is that much pure research tends to give rise to major industries in about one generation. Each industry will have some total economic benefit which can be…
Managing Your Mathematics Program: A Total System. A Guide to the U-SAIL Basic Mathematics System.
ERIC Educational Resources Information Center
Hales, Carma M.; Jones, Maurine E.
The Utah System Approach to Individual Learning (U-SAIL) Mathematics System was developed to make it possible for teachers to provide excellence in arithmetic instruction. It is based on the premise that in order to teach arithmetic well, teachers must accurately assess, teach directly, provide students with focused practice, corrective feedback,…
ERIC Educational Resources Information Center
Ben-Zvi-Assaraf, Orit; Even-Israel, Chava
2011-01-01
The "Medical Systems" program was designed to introduce high school students to the world of advanced medicine. Its premise was to use an applied scientific discipline like medicine to encourage high-school students' interest in basic science. This study compares the teen-aged graduates of "Medical Systems" with fourth and…
ERIC Educational Resources Information Center
Kaplan, Rochelle Goldberg
The rationale of this study is based on the premise that the outcomes of children's learning are specifically shaped by the interaction of their individual cognitive structures with the presentations of curricular content in the classroom. Therefore, since the interpretive tools that children apply to instructional content may vary substantially,…
Basic Considerations in the Combustion of Hydrocarbon Fuels with Air
NASA Technical Reports Server (NTRS)
Barnett, Henry C; Hibbard, Robert R
1957-01-01
Basic combustion research is collected, collated, and interpreted as it applies to flight propulsion. The following fundamental processes are treated in separate chapters: atomization and evaporation of liquid fuels, flow and mixing processes in combustion chambers, ignition and flammability of hydrocarbon fuels, laminar flame propagation, turbulent flames, flame stabilization, diffusion flames, oscillations in combustors, and smoke and coke formation in the combustion of hydrocarbon-air mixtures. Theoretical background, basic experimental data, and practical significance to flight propulsion are presented.
The Environmental Assessment and Management (TEAM) Guide: South Dakota Supplement
2010-02-01
Nonpermanent Bulk Pesticide Storage Containers - mobile containers positioned on or part of movable equipment, such as trucks, trailers , and tank cars...Storage Containers - containers which are not positioned on or a part of movable equipment, such as trucks, trailers , and tank cars (SDAR 12:56:01:01...premises such as houses, trailer courts, commercial buildings, and institutions (SDAR 74:53:01:01) [Citation Revised April 1998]. • Domestic Water
NASA Technical Reports Server (NTRS)
Heneman, F. C.
1981-01-01
This study examined the effect of sulfur-containing compounds on the storage stability of Jet A turbine fuel. It was found that alkyl sulfides and disulfides increased the fuel's stability while all thiols and thiophene derivatives tested decreased fuel stability (increased deposit formation) at temperatures and sulfur concentrations selected. Linear Arrhenius plots of sulfur-spiked fuel samples demonstrated that deposit formation decreased with increased slope for all alkyl sulfides, alkyl disulfides, thiols, and thiophene derivatives. A plot of insoluble deposit vs. concentration of added alkyl sulfide produces a negative slope. It appears that the inhibiting mechanism for alkyl sulfides is a result of the compound's reactivity with intermediate soluble precursors to deposit in the fuel. A method of approximating the relative basicity of weak organosulfur bases was developed via measurement of their resonance chemical shifts in proton NMR. Linear plots of log gm. deposit vs. change in chemical shift (shift differences between sulfur bases neat and complexed with I2) were found for alkyl sulfides and alkyl thiols. This suggests the possibility that increased deposit formation is due to base catalysis with these compound classes.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goyen, S.; Baily, E.; Mawer, J.
1980-10-01
The objective of the work reported herein was to develop a preliminary conceptual design, capital requirements, and product cost for a lignite-to-methanol plant incorporating Winkler Gasification Technology and ICI Methanol synthesis. The lignite-to-methanol complex described herein is designed to produce 15,000 TPD of fuel grade methanol. The complex is designed to be self-sufficient with respect to all utility services, offsites, and other support facilities, including power generation. Following is a summary of the results of the study: (1) Tons per day (TPD) of Lignite Feedstock and Fuel (as received) was 47,770; (2) TPD of Fuel Grade Methanol Product was 15,000;more » (3) Thermal efficiency, % (HHV) was 47.4; (4) Plant investment expressed in terms of first quarter of 1980 was ($ Million) 1545; and (5) Applying the economic premises used by EPRI for fuel conversion plant utility type financing, the calculated levelized and first year product costs are included.« less
27 CFR 24.257 - Labeling wine containers.
Code of Federal Regulations, 2011 CFR
2011-04-01
... as provided in paragraph (c)(2)(ii) of this section, a name of geographic significance, which is also... required by this section is: 2 millimeters for containers of more than 187 milliliters and 1 millimeter for... and address of the wine premises where bottled or packed; (2) The brand name, if different from above...
Bio-mass utilization in high pressure cogeneration boiler
NASA Astrophysics Data System (ADS)
Koundinya, Sandeep; Maria Ambrose Raj, Y.; Sreeram, K.; Divakar Shetty A., S.
2017-07-01
Coal is widely used all over the world in almost all power plants. The dependence on coal has increased enormously as the demand for electricity has reached its peak. Coal being a non-renewable source is depleting fast. We being the engineers, it's our duty to conserve the natural resources and optimize the coal consumption. In this project, we have tried to optimize the bio-mass utilization in high pressure cogeneration boiler. The project was carried in Seshasayee Paper and Boards Limited, erode related to Boiler No:10 operating at steam pressure of 105 kscg and temperature of 510°C. Available bio-mass fuels in and around the mill premises are bagasse, bagasse pith, cane trash and chipper dust. In this project, we have found out the coal equivalent replacement by the above bio-mass fuel(s) to facilitate deciding on the optimized quantity of coal that can be replaced by biomass without modifying the existing design of the plant. The dominant fuel (coal) which could be displaced with the substitute biomass fuel had been individually (biomass) analyzed.
Transition to Glass: Pilot Training for High-Technology Transport Aircraft
1999-05-01
training programs D. Training considerations STUDY METHODOLOGY A. Basic questions and premises B. Questionnaires: attitude scales, demography , and flying...product of many tributaries, including the original Continental ("Old Continental" as it is called by pilots), Pioneer , Texas International, Frontier...to the southwest and later Hawaii. In 1953 Continental acquired Pioneer Airlines, with 16 destinations in the west. Six moved the company from El
Large drinks are no mistake: Glass size, but not shape, affects alcoholic beverage drink pours
Kerr, William C.; Patterson, Deidre; Koenen, Mary Albert; Greenfield, Thomas K.
2009-01-01
Introduction and Aims Drink alcohol content has been shown to be variable and is an important determinant of alcohol intake. This study evaluates claims regarding the effects of glass size and glass shape on the amount of alcohol in on-premise drinks. Design and Methods Wine and spirits drinks were purchased and measured in 80 on-premise establishments in 10 Northern California Counties. Drink alcohol content was measured as the liquid volume of the drink multiplied by the percentage alcohol by volume of given brands or from analysis of mixed drink and wine samples. Results Larger glass size was associated with larger on-premise pours of straight shots and mixed drinks served in the relatively large pint glass and variable “other” glass type were found to contain more alcohol than drinks served in a short wide glass. No significant differences were found for other drink types. Drinks poured in short wide glasses were not found to contain more alcohol than drinks poured in tall thin glasses. Bars with mostly black patrons were found to serve spirits drinks with more alcohol than bars with other patron types. Discussion and Conclusions Glass shape does not affect actual drink pours in the US but glass size does in some cases. Drinkers should measure wine and spirits pours at home to achieve standard drink amounts and consumer education programs should foster awareness of the relatively high drink alcohol content of on-premise wine and mixed spirits drinks. More research is needed to evaluate potential differences in drink pours by patron race and ethnicity. PMID:19594789
Basic elements of light water reactor fuel rod design. [FUELROD code
DOE Office of Scientific and Technical Information (OSTI.GOV)
Weisman, J.; Eckart, R.
1981-06-01
Basic design techniques and equations are presented to allow students to understand and perform preliminary fuel design for normal reactor conditions. Each of the important design considerations is presented and discussed in detail. These include the interaction between fuel pellets and cladding and the changes in fuel and cladding that occur during the operating lifetime of the fuel. A simple, student-oriented, fuel rod design computer program, called FUELROD, is described. The FUELROD program models the in-pile pellet cladding interaction and allows a realistic exploration of the effect of various design parameters. By use of FUELROD, the student can gain anmore » appreciation of the fuel rod design process. 34 refs.« less
A Traction Control Strategy with an Efficiency Model in a Distributed Driving Electric Vehicle
Lin, Cheng
2014-01-01
Both active safety and fuel economy are important issues for vehicles. This paper focuses on a traction control strategy with an efficiency model in a distributed driving electric vehicle. In emergency situation, a sliding mode control algorithm was employed to achieve antislip control through keeping the wheels' slip ratios below 20%. For general longitudinal driving cases, an efficiency model aiming at improving the fuel economy was built through an offline optimization stream within the two-dimensional design space composed of the acceleration pedal signal and the vehicle speed. The sliding mode control strategy for the joint roads and the efficiency model for the typical drive cycles were simulated. Simulation results show that the proposed driving control approach has the potential to apply to different road surfaces. It keeps the wheels' slip ratios within the stable zone and improves the fuel economy on the premise of tracking the driver's intention. PMID:25197697
A traction control strategy with an efficiency model in a distributed driving electric vehicle.
Lin, Cheng; Cheng, Xingqun
2014-01-01
Both active safety and fuel economy are important issues for vehicles. This paper focuses on a traction control strategy with an efficiency model in a distributed driving electric vehicle. In emergency situation, a sliding mode control algorithm was employed to achieve antislip control through keeping the wheels' slip ratios below 20%. For general longitudinal driving cases, an efficiency model aiming at improving the fuel economy was built through an offline optimization stream within the two-dimensional design space composed of the acceleration pedal signal and the vehicle speed. The sliding mode control strategy for the joint roads and the efficiency model for the typical drive cycles were simulated. Simulation results show that the proposed driving control approach has the potential to apply to different road surfaces. It keeps the wheels' slip ratios within the stable zone and improves the fuel economy on the premise of tracking the driver's intention.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ferrada, J.J.
This report compiles preliminary information that supports the premise that a repository is needed in Latin America and analyzes the nuclear situation (mainly in Argentina and Brazil) in terms of nuclear capabilities, inventories, and regional spent-fuel repositories. The report is based on several sources and summarizes (1) the nuclear capabilities in Latin America and establishes the framework for the need of a permanent repository, (2) the International Atomic Energy Agency (IAEA) approach for a regional spent-fuel repository and describes the support that international institutions are lending to this issue, (3) the current situation in Argentina in order to analyze themore » Argentinean willingness to find a location for a deep geological repository, and (4) the issues involved in selecting a location for the repository and identifies a potential location. This report then draws conclusions based on an analysis of this information. The focus of this report is mainly on spent fuel and does not elaborate on other radiological waste sources.« less
2014-05-27
TiN(100) surface (Pt/TiN) could be a promising catalyst for proton exchange membrane fuel cells ( PEM FCs). The adsorption properties of molecules on Pt...under both acidic and basic operation conditions in PEM FCs. 15. SUBJECT TERMS Catalysis, fuel cells , density functional theory, density functional...poisoning on functionalized Pt/TiN surfaces under both acidic and basic operation conditions in PEM FCs. 15. SUBJECT TERMS Catalysis, fuel cells
Basic repository source term and data sheet report: Lavender Canyon
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1988-01-01
This report is one of a series describing studies undertaken in support of the US Department of Energy Civilian Radioactive Waste Management (CRWM) Program. This study contains the derivation of values for environmental source terms and resources consumed for a CRWM repository. Estimates include heavy construction equipment; support equipment; shaft-sinking equipment; transportation equipment; and consumption of fuel, water, electricity, and natural gas. Data are presented for construction and operation at an assumed site in Lavender Canyon, Utah. 3 refs; 6 tabs.
Code of Federal Regulations, 2010 CFR
2010-04-01
... mill licenses to manufacture animal feed bearing or containing new animal drugs. 510.305 Section 510... copies of approved medicated feed mill licenses to manufacture animal feed bearing or containing new... medicated feed mill license (Form FDA 3448) on the premises of the manufacturing establishment; and (b...
Industrial Mobilization: The Relevant History. Revised
1983-01-01
purpose was much too narrow and, in fact, wrong in its basic premise. In- stead, I adopted a more useful goal, i.e., to describe and analyze the...production of defense Items or research and development for DOD and the Atomic Energy Commission. The hearings had resultod from competition between two...I II| rll ll ll I.I -. _- History of Korean War Ere such as atomic energy plants and facilities housing heavy presses
Laudan, Larry; Laudan, Rachel
2016-10-01
A basic premise of hyphenated history-and-philosophy-of-science is that theories of scientific change have to be based on empirical evidence derived from carefully constructed historical case studies. This paper analyses one such systematic attempt to test philosophical claims, describing its historical context, rationale, execution, and limited impact. Copyright © 2016 Elsevier Ltd. All rights reserved.
A Study of Transport Airplane Crash-Resistant Fuel Systems
NASA Technical Reports Server (NTRS)
Jones, Lisa (Technical Monitor); Robertson, S. H.; Johnson, N. B.; Hall, D. S.; Rimson, I. J.
2002-01-01
This report presents the results of a study, funded by the Federal Aviation Administration (FAA), of transport airplane crash-resistant fuel system (CRFS). The report covers the historical studies related to aircraft crash fires and fuel containment concepts undertaken by the FAA, NASA, and the U.S. Army, which ultimately led to the current state of the art in CRFS technology. It describes the basic research, testing, field investigations and production efforts which have led to the highly successful military CRFS, which has saved many lives and reduced costs of accidents. Current CRFS technology used in transport category airplanes is defined and compared to the available state-of-the-art technology. The report provides information to the FAA and other government organizations which can help them plan their efforts to improve the state of crash fire protection in the transport airplane fleet. The report provides guidance to designers looking for information about CRFS design problems, analysis tools to use for product improvement, and a summary of current and proposed regulations for transport category airplane fuel systems.
Summary of BISON Development and Validation Activities - NEAMS FY16 Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Williamson, R. L.; Pastore, G.; Gamble, K. A.
This summary report contains an overview of work performed under the work package en- titled “FY2016 NEAMS INL-Engineering Scale Fuel Performance (BISON)” A first chapter identifies the specific FY-16 milestones, providing a basic description of the associated work and references to related detailed documentation. Where applicable, a representative technical result is provided. A second chapter summarizes major additional accomplishments, which in- clude: 1) publication of a journal article on solution verification and validation of BISON for LWR fuel, 2) publication of a journal article on 3D Missing Pellet Surface (MPS) analysis of BWR fuel, 3) use of BISON to designmore » a unique 3D MPS validation experiment for future in- stallation in the Halden research reactor, 4) participation in an OECD benchmark on Pellet Clad Mechanical Interaction (PCMI), 5) participation in an OECD benchmark on Reactivity Insertion Accident (RIA) analysis, 6) participation in an OECD activity on uncertainity quantification and sensitivity analysis in nuclear fuel modeling and 7) major improvements to BISON’s fission gas behavior models. A final chapter outlines FY-17 future work.« less
FINAL SAFETY ANALYSIS REPORT--SNAP 1A RADIOISOTOPE FUELED THERMOELECTRIC GENERATOR
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dix, G.P.
1960-06-30
The safety aspects involved in utilizing the Task 2 radioisotope-powered thermoelectric generator in a terrestrial satellite are described. It is based upon a generalized satellite mission having a 600-day orbital lifetime. A description of the basic design of the generator is presented in order to establish the analytical model. This includes the generator design, radiocerium fuel properties, and the fuel core. The transport of the generator to the launch site is examined, including the shipping cask, shipping procedures, and shipping hazards. A description of ground handling and vehicle integration is presented including preparation for fuel transfer, transfer, mating of generatorsmore » to final stage, mating final stage to booster, and auxiliary support equipment. The flight vehicle is presented to complete the analytical model. Contained in this chapter are descriptions of the booster-sustainer, final stage, propellants, and built-in safety systems. The typical missile range is examined with respect to the launch complex and range safety characteristics. The shielding of the fuel is discussed and includes both dose rates and shield thicknesses required. The bare core, shielded generator, fuel transfer operation and dose rates for accidental conditions are treated. mechanism of re-entry from the successful mission is covered. Radiocerium inventories with respect to time and the chronology of re-entry are specifically treated. The multiplicity of conditions for aborted missions is set forth. The definition of aborted missions is treated first in order to present the initial conditions. Following this, a definition of the forces imposed upon the generator is presented. The aborted missions is presented. A large number of initial vehicle failure cases is narrowed down into categories of consequences. Since stratospheric injection of fuel results in cases where the fuel is not contained after re-entry, an extensive discussion of the fall-out mechanism is presented. (auth)« less
Relating off-premises alcohol outlet density to intentional and unintentional injuries.
Morrison, Christopher; Smith, Karen; Gruenewald, Paul J; Ponicki, William R; Lee, Juliet P; Cameron, Peter
2016-01-01
This study investigated the hypotheses that (i) intentional and unintentional injuries occur more frequently in areas with greater density of off-premises alcohol outlets; and (ii) larger and chain outlets selling cheaper alcohol contribute more substantially to injury risk than smaller and independent outlets. Ecological cross-sectional. From the 256 Statistical Area level 2 (SA2) census units in Melbourne, Australia, we selected a random sample of 62 units. There were 2119 Statistical Area level 1 (SA1) units nested within the selected SA2 units. The selected units contained 295 off-premises outlets. Two independent observers conducted premises assessments in all off-premises outlets, assessing the volume of alcohol available for sale (paces of shelf space), price (least wine price) and other operating characteristics (chain versus independent, drive-through). Outlet counts, assessed outlet characteristics and other area characteristics (population density, median age, median income, retail zoning) were aggregated within SA1 units. Dependent variables were counts of ambulance attended intentional injuries (assaults, stabbings, shootings) and unintentional injuries (falls, crush injuries and object strikes). In univariable analyses, chain outlets were larger (r = 0.383; P < 0.001) and sold cheaper alcohol (r = -0.484; P < 0.001) compared with independent outlets. In Bayesian spatial Poisson models, off-premises outlet density was positively related to both intentional [incidence rate ratio (IRR) = 1.38; 95% credible interval (CI) = 1.19, 1.60] and unintentional injuries (IRR = 1.18; 95% CI = 1.06, 1.30). After disaggregation by outlet characteristics, chain outlet density was also related to both intentional (IRR = 1.35; 95% CI = 1.11, 1.64) and unintentional injuries (IRR = 1.20; 95% CI = 1.08, 1.38). Greater off-premises outlet density is related to greater incidence of traumatic injury, and chain outlets appear to contribute most substantially to traumatic injury risk. © 2015 Society for the Study of Addiction.
Relating Off-Premises Alcohol Outlet Density to Intentional and Unintentional Injuries
Morrison, Christopher; Smith, Karen; Gruenewald, Paul J.; Ponicki, William R.; Lee, Juliet P.; Cameron, Peter
2015-01-01
Aims This study investigated the hypotheses that (i) intentional and unintentional injuries occur more frequently in areas with greater density of off-premises alcohol outlets; and (ii) larger and chain outlets selling cheaper alcohol contribute more substantially to injury risk than smaller and independent outlets. Design Ecological cross-sectional. Setting From the 256 Statistical Area level 2 (SA2) Census units in Melbourne, Australia, we selected a random sample of 62 units. There were 2,119 Statistical Area level 1 (SA1) units nested within the selected SA2 units. Participants The selected units contained 295 off-premises outlets. Measurements Two independent observers conducted premises assessments in all off-premises outlets, assessing the volume of alcohol available for sale (paces of shelf space), price (least wine price), and other operating characteristics (chain vs. independent, drive-through). Outlet counts, assessed outlet characteristics, and other area characteristics (population density, median age, median income, retail zoning) were aggregated within SA1 units. Dependent variables were counts of ambulance attended intentional injuries (assaults, stabbings, shootings) and unintentional injuries (falls, crush injuries, and object strikes). Findings In univariable analyses, chain outlets were larger (r = 0.383; p < 0.001) and sold cheaper alcohol (r = −0.484; p < 0.001) compared with independent outlets. In Bayesian spatial Poisson models, off-premises outlet density was positively related to both intentional (Incidence Rate Ratio = 1.38; 95% Credible Interval: 1.19, 1.60) and unintentional injuries (IRR = 1.18; 95% CI: 1.06, 1.30). After disaggregation by outlet characteristics, chain outlet density was also related to both intentional (IRR = 1.35; 95% CI: 1.11, 1.64) and unintentional injuries (IRR = 1.20; 95% CI: 1.08, 1.38). Conclusions Greater off-premises outlet density is related to greater incidence of traumatic injury, and chain outlets appear to contribute most substantially to traumatic injury risk. PMID:26283189
DOE Office of Scientific and Technical Information (OSTI.GOV)
Krawiec, F.; Thomas, T.; Jackson, F.
1980-11-01
An examination is made of the current and future energy demands, and uses, and cost to characterize typical applications and resulting services in the US and industrial sectors of 15 selected states. Volume III presents tables containing data on selected states' manufacturing subsector energy consumption, functional uses, and cost in 1974 and 1976. Alabama, California, Illinois, Indiana, Louisiana, Michigan, Missouri, New Jersey, New York, Ohio, Oregon, Pennsylvania, Texas, West Virginia, and Wisconsin were chosen as having the greatest potential for replacing conventional fuel with solar energy. Basic data on the quantities, cost, and types of fuel and electric energy purchasedmore » by industr for heat and power were obtained from the 1974 and 1976 Annual Survey of Manufacturers. The specific indutrial energy servic cracteristics developed for each selected state include. 1974 and 1976 manufacturing subsector fuels and electricity consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector fuel consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector average cost of purchsed fuels and electricity per million Btu by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); 1974 and 1976 manufacturing subsector fuels and electric energy intensity by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); manufacturing subsector average annual growth rates of (1) fuels and electricity consumption, (2) fuels and electric energy intensity, and (3) average cost of purchased fuels and electricity (1974 to 1976). Data are compiled on purchased fuels, distillate fuel oil, residual ful oil, coal, coal, and breeze, and natural gas. (MCW)« less
40 CFR 59.653 - How do I test portable fuel containers?
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 6 2012-07-01 2012-07-01 false How do I test portable fuel containers... Families § 59.653 How do I test portable fuel containers? You must test the portable fuel container as.... Perform a slosh test by filling the portable fuel container to 40 percent of its capacity with the fuel...
40 CFR 59.653 - How do I test portable fuel containers?
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 6 2013-07-01 2013-07-01 false How do I test portable fuel containers... Families § 59.653 How do I test portable fuel containers? You must test the portable fuel container as.... Perform a slosh test by filling the portable fuel container to 40 percent of its capacity with the fuel...
40 CFR 59.653 - How do I test portable fuel containers?
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 6 2014-07-01 2014-07-01 false How do I test portable fuel containers... Families § 59.653 How do I test portable fuel containers? You must test the portable fuel container as.... Perform a slosh test by filling the portable fuel container to 40 percent of its capacity with the fuel...
Ducommun, Raphaël; Favre, Marie-France; Carrard, Delphine; Fischer, Fabian
2010-03-01
A Janus head-like bi-cathodic microbial fuel cell was constructed to monitor the electron transfer from Saccharomyces cerevisiae to a woven carbon anode. The experiments were conducted during an ethanol cultivation of 170 g/l glucose in the presence and absence of yeast-peptone medium. First, using a basic fuel-cell type activity sensor, it was shown that yeast-peptone medium contains electroactive compounds. For this purpose, 1% solutions of soy peptone and yeast extract were subjected to oxidative conditions, using a microbial fuel cell set-up corresponding to a typical galvanic cell, consisting of culture medium in the anodic half-cell and 0.5 M K(3)Fe(CN)(6) in the cathodic half-cell. Second, using a bi-cathodic microbial fuel cell, it was shown that electrons were transferred from yeast cells to the carbon anode. The participation of electroactive compounds in the electron transport was separated as background current. This result was verified by applying medium-free conditions, where only glucose was fed, confirming that electrons are transferred from yeast cells to the woven carbon anode. Knowledge about the electron transfer through the cell membrane is of importance in amperometric online monitoring of yeast fermentations and for electricity production with microbial fuel cells. Copyright (c) 2009 John Wiley & Sons, Ltd.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miall, A.D.
The basic premise of the recent Exxon cycle chart, that there exists a globally correlatable suite of third-order eustatic cycles, remains unproven. Many of the tests of this premise are based on circular reasoning. The implied precision of the Exxon global cycle chart is not supportable, because it is greater than that of the best available chronostratigraphic techniques, such as those used to construct the global standard time scale. Correlations of new stratigraphic sections with the Exxon chart will almost always succeed, because there are so many Exxon sequence-boundary events from which to choose. This is demonstrated by the usemore » of four synthetic sections constructed from tables of random numbers. A minimum of 77% successful correlations of random events with the Exxon chart was achieved. The existing cycle chart represents an amalgam of regional and local tectonic events and probably also includes unrecognized miscorrelations. It is of questionable value as an independent standard of geologic time.« less
Zocher, Roy W.
1991-01-01
A nuclear fuel element and a method of manufacturing the element. The fuel element is comprised of a metal primary container and a fuel pellet which is located inside it and which is often fragmented. The primary container is subjected to elevated pressure and temperature to deform the container such that the container conforms to the fuel pellet, that is, such that the container is in substantial contact with the surface of the pellet. This conformance eliminates clearances which permit rubbing together of fuel pellet fragments and rubbing of fuel pellet fragments against the container, thus reducing the amount of dust inside the fuel container and the amount of dust which may escape in the event of container breach. Also, as a result of the inventive method, fuel pellet fragments tend to adhere to one another to form a coherent non-fragmented mass; this reduces the tendency of a fragment to pierce the container in the event of impact.
Sustainable development: A HUD perspective
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goldfarb, E.
1994-12-31
Sustainable development is the current term now being used to describe the environmental movement. The term`s popularity can be traced to publication of Our Common Future, the report of the World Commission on Environment and Development (Brundtland Commission). Sustainable development means exactly what is implied; development that meets the needs of the present without compromising the ability of future generations to meet their own needs (Brundtland Commission). It is another way of conveying the basic premise of {open_quotes}Spaceship Earth{close_quotes}; that our species has been given this planet to live on and we must carefully balance resource utilization if we wantmore » to endure more than a few generations, because this is all we`ve got. It is a natural evolution of the conservation and environmental movements into a format that recognizes that environmental issues cannot be viewed in isolation, but must be evaluated in a context of economic development (Powledge). Sustainable development is thus a broad term that encompasses many elements, depending upon the context. Such elements can include: 1 energy, 2 economic development, 3 pollution prevention, 4 biodiversity, 5 historic preservation, 6 social equity, and 7 recycling and solid waste disposal. One of the cornerstones of sustainable development is energy policy, since energy use is perhaps the most defining element of contemporary civilization. In the energy discipline, sustainability can best be paraphrased as living off one`s income as opposed to depleting ones capital. In other words, using solar, wind and other renewables rather than fossil fuels. Fossil fuels are limited and will eventually be depleted, therefore they cannot be considered sustainable. Another element embraced by sustainable development is biodiversity. The biodiversity movement is most sharply distinguished from traditional conservationism for its commitment to the principle of preserving and managing entire ecosystems.« less
Jacob, Anil G; Lal, Pranay G; Buragohain, Anita
2014-02-01
The United Nations Development Programme's (UNDP) position on non-communicable diseases (NCDs) is undermined by a key issue at the global institutional level. Fundamentally, the nature of the relationship between international development agencies and the tobacco industry is at odds with the professed public health priorities of the former. At its core, the business model of the tobacco industry is premised on the sale of addictive and disease-causing substances that fuel NCDs in the first place. The role of the United Nations system and, in particular, UNDP is to 'build nations that can withstand crisis', not to collaborate with entities that profit from crises. This simple and well-established fact cannot be overlooked. We outline an array of conflict of interests. If the effects of NCDs are ever to be reversed, then international agencies such as the UNDP ought to adhere to ethical standards in choosing partners and avoid conflict of interests. In the absence of this, the UNDP may well compromise its own agenda and proliferate NCDs rather than containing them. © 2014 John Wiley & Sons Ltd.
Effect of bleaching on microhardness of esthetic restorative materials.
Malkondu, Özlem; Yurdagüven, Haktan; Say, Esra Can; Kazazoğlu, Ender; Soyman, Mübin
2011-01-01
This study evaluated the effect of a high-concentration carbamide peroxide–containing home bleaching system (Opalescence PF) and a hydrogen peroxide–containing over-the-counter bleaching system (Treswhite Supreme) on the microhardness of two nanocomposites (Filtek Supreme XT and Premise) and leucite-reinforced glass ceramic (Empress Esthetic), glass ceramic (Empress 2 layering), and feldspathic porcelain (Matchmaker MC). A total of 100 specimens, 20 of each kind of the restorative materials, 2 mm in thickness and 10 mm in diameter, were fabricated. Then the specimens were polished with SiC paper and 1 μm alumina polishing paste. After polishing, porcelain specimens were glazed in accordance with the manufacturer's instructions. Each type of restorative material was then randomly divided into two groups (n=10), and the specimens were treated with either Opalescence PF or Treswhite Supreme. The microhardness of the specimens before bleaching (baseline) and after bleaching was determined using a digital microhardness tester. Data were analyzed using the Mann-Whitney U-test and the Wilcoxon test. Opalescence PF significantly influenced the hardness of all the restorative materials. Statistically significant decreases with respect to before bleaching were found for Premise (p=0.005), Empress Esthetic (p=0.003), Empress 2 layering (p=0.005), and Matchmaker-MC (p=0.003), whereas a statistically significant increase was observed in Filtek Supreme XT (p=0.028). The difference in the microhardness values between before and after bleaching using Treswhite Supreme was statistically significant only for Premise (p=0.022). High-concentration carbamide peroxide–containing home bleaching may affect the microhardness of restorative materials.
Conditionals, Context, and the Suppression Effect.
Cariani, Fabrizio; Rips, Lance J
2017-04-01
Modus ponens is the argument from premises of the form If A, then B and A to the conclusion B (e.g., from If it rained, Alicia got wet and It rained to Alicia got wet). Nearly all participants agree that the modus ponens conclusion logically follows when the argument appears in this Basic form. However, adding a further premise (e.g., If she forgot her umbrella, Alicia got wet) can lower participants' rate of agreement-an effect called suppression. We propose a theory of suppression that draws on contemporary ideas about conditional sentences in linguistics and philosophy. Semantically, the theory assumes that people interpret an indicative conditional as a context-sensitive strict conditional: true if and only if its consequent is true in each of a contextually determined set of situations in which its antecedent is true. Pragmatically, the theory claims that context changes in response to new assertions, including new conditional premises. Thus, the conclusion of a modus ponens argument may no longer be accepted in the changed context. Psychologically, the theory describes people as capable of reasoning about broad classes of possible situations, ordered by typicality, without having to reason about individual possible worlds. The theory accounts for the main suppression phenomena, and it generates some novel predictions that new experiments confirm. Copyright © 2016 Cognitive Science Society, Inc.
Tarescavage, Anthony M; Ben-Porath, Yossef S
2015-01-01
In a recently published article in this journal, Odland, Lammy, Perle, Martin, and Grote report Monte Carlo-simulated normative base rates of scale elevations on the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF). Their primary conclusion--reflected in the title of their article--is that MMPI-2-RF interpretation is associated with "high risk of pathologizing healthy adults" when the 40 substantive scales of the test are simultaneously interpreted. In this paper, we describe how their conclusion follows from several faulty premises, three of which were already debunked in an earlier article and remain false despite counterarguments proposed by Odland and colleagues. We also address these authors' misinterpretation of their analyses and, furthermore, their premise that MMPI-2-RF interpretive guidelines are flawed because they "currently do not account for a basic statistical principle: Type I (or alpha) error inflation" (p. 1). This premise is irrelevant to psychological test interpretation and misaligned with neuropsychological testing literature cited in support of it. Consistent with suggestions by some of the authors they cite, we reiterate MMPI-2-RF interpretive guidelines designed to mitigate the impact of measurement error (not alpha error) by way of a scientific assessment approach that relies on integration of information derived from multiple sources.
Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels
Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam
2018-04-03
Systems, processes, and catalysts are disclosed for obtaining fuel and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.
Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels
Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam
2017-05-30
Systems, processes, and catalysts are disclosed for obtaining fuel and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.
Systems and processes for conversion of ethylene feedstocks to hydrocarbon fuels
Lilga, Michael A.; Hallen, Richard T.; Albrecht, Karl O.; Cooper, Alan R.; Frye, John G.; Ramasamy, Karthikeyan Kallupalayam
2017-09-26
Systems, processes, and catalysts are disclosed for obtaining fuels and fuel blends containing selected ratios of open-chain and closed-chain fuel-range hydrocarbons suitable for production of alternate fuels including gasolines, jet fuels, and diesel fuels. Fuel-range hydrocarbons may be derived from ethylene-containing feedstocks and ethanol-containing feedstocks.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE TRANSPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS TEXAS (SPLENETIC) FEVER IN CATTLE § 72.22 Cars, vehicles...
De-radicalization: You Can Check Out Anytime You Like, But What Will Make You Leave
2010-12-01
comes to describing individual motivations, Abraham Maslow captures the essence of the issue in a 1943 paper entitled A Theory of Human Motivation...behavior until they are fulfilled to a basic degree. 3 Abraham Maslow , "A Theory of Human...Human: A Biography of Abraham Maslow , succinctly described the premise of self-actualization, “In the core of our being we each carry the seed of our
ERIC Educational Resources Information Center
Gartner, Alan
The result of a week long visit to the ARTTC program, this report identifies program strengths and weaknesses. The basic premise behind this 4 year college program is identified as "belief that persons native to a community and trained in that community are best prepared to teach in it", since these students learn while they teach in 10…
49 CFR 173.230 - Fuel cell cartridges containing hazardous material.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 2 2010-10-01 2010-10-01 false Fuel cell cartridges containing hazardous material... Than Class 1 and Class 7 § 173.230 Fuel cell cartridges containing hazardous material. (a) Requirements for Fuel Cell Cartridges. Fuel cell cartridges, including when contained in or packed with equipment...
Characteristics and synergistic effects of co-combustion of carbonaceous wastes with coal.
Onenc, Sermin; Retschitzegger, Stefan; Evic, Nikola; Kienzl, Norbert; Yanik, Jale
2018-01-01
This study presents combustion behavior and emission results obtained for different fuels: poultry litter (PL) and its char (PLC), scrap tires (ST) and its char (STC) and blends of char/lignite (PLC/LIG and STC/LIG). The combustion parameters and emissions were investigated via a non-isothermal thermogravimetric method and experiments in a lab-scale reactor. Fuel indexes were used for the prediction of high temperature corrosion risks and slagging potentials of the fuels used. The addition of chars to lignite caused a lowering of the combustion reactivity (anti-synergistic effect). There was a linear correlation between the NO x emissions and the N content of the fuel. The form of S and the concentrations of alkali metals in the fuel had a strong effect on the extent of SO 2 emissions. The use of PL and PLC in blends reduced SO 2 emissions and sulphur compounds in the fly ash. The 2S/Cl ratio in the fuel showed that only PLC and STC/PLC would show a risk of corrosion during combustion. The ratio of basic to acidic oxides in fuel indicated that ST, STC and STC/LIG have low slagging potential. The molar (Si+P+K)/(Ca+Mg) ratio, which was used for PL, PLC and PLC containing blends, showed that the ash melting temperatures of these fuels would be higher than 1000 °C. Copyright © 2017 Elsevier Ltd. All rights reserved.
Lightweight cryogenic-compatible pressure vessels for vehicular fuel storage
Aceves, Salvador; Berry, Gene; Weisberg, Andrew H.
2004-03-23
A lightweight, cryogenic-compatible pressure vessel for flexibly storing cryogenic liquid fuels or compressed gas fuels at cryogenic or ambient temperatures. The pressure vessel has an inner pressure container enclosing a fuel storage volume, an outer container surrounding the inner pressure container to form an evacuated space therebetween, and a thermal insulator surrounding the inner pressure container in the evacuated space to inhibit heat transfer. Additionally, vacuum loss from fuel permeation is substantially inhibited in the evacuated space by, for example, lining the container liner with a layer of fuel-impermeable material, capturing the permeated fuel in the evacuated space, or purging the permeated fuel from the evacuated space.
Stylistic Reformulation: Theoretical Premises and Practical Applications.
ERIC Educational Resources Information Center
Schultz, Jean Marie
1994-01-01
Various aspects of writing style are discussed to propose concrete methods for improving students' performance. Topics covered include the relationship between syntactic and cognitive complexity and classroom techniques and the reformulation technique as applied to student writing samples. (Contains 20 references.) (LB)
Nuclear energy: salvation or suicide. [Contains glossary
DOE Office of Scientific and Technical Information (OSTI.GOV)
Collins, C.C.
A collection of 700 editorials and feature articles collected from 125 US newspapers addresses the dominant areas of concern about nuclear power: plant safety, radioactive wastes, proliferation, and cost. The editorial debates present the pros and cons of Three Mile Island and other accidents, ocean dumping, evacuation plans, radioactive waste transport and storage, nuclear fuel processing, the Karen Silkwood case, and breeder reactors. The appendix raises the question of the future for fission and the possibility of nuclear fusion as an alternative. There is a subject index and a glossary of basic terms.
Cynthia L. Riccardi; Susan J. Prichard; David V. Sandberg; Roger D. Ottmar
2007-01-01
Wildland fuel characteristics are used in many applications of operational fire predictions and to understand fire effects and behaviour. Even so, there is a shortage of information on basic fuel properties and the physical characteristics of wildland fuels. The Fuel Characteristic Classification System (FCCS) builds and catalogues fuelbed descriptions based on...
Nuclear reactor fuel containment safety structure
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rosewell, M.P.
A nuclear reactor fuel containment safety structure is disclosed and is shown to include an atomic reactor fuel shield with a fuel containment chamber and exhaust passage means, and a deactivating containment base attached beneath the fuel reactor shield and having exhaust passages, manifold, and fluxing and control material and vessels. 1 claim, 8 figures.
Dennis, Matthew J
2010-05-01
It is the premise of this paper that the need for medical and basic science instruction in dentistry will increase over time. However, student and faculty appreciation of the relevance and significance of medicine and basic science to clinical dentistry has been elusive, largely due to difficulties linking biomedical science instruction and clinical dental instruction. The scope of traditional procedure based oral surgery instruction can be expanded in an attempt to bridge the medical science-clinical gap. Topics such as health status evaluation, medical risk assessment, and a variety of other biomedical issues can be presented to students in a way which imparts specific dental meaning to basic medical science in real-life clinical situations. Using didactic and chair side instruction in an oral surgery clinical environment, students are confronted with the need to understand these issues and how they relate to the patients they encounter who present for dental care.
Application for certification 1980 model year light-duty vehicles - Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification, 1990 model-year light-duty vehicles - Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification 1993 model year light-duty vehicles - Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification 1981 model year light-duty vehicles - Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification 1987 model year light-duty vehicles - Peugeot
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. The engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. They also provide information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification 1981 model year light-duty vehicles - Peugeot
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Automotive Fuel and Exhaust Systems.
ERIC Educational Resources Information Center
Irby, James F.; And Others
Materials are provided for a 14-hour course designed to introduce the automotive mechanic to the basic operations of automotive fuel and exhaust systems incorporated on military vehicles. The four study units cover characteristics of fuels, gasoline fuel system, diesel fuel systems, and exhaust system. Each study unit begins with a general…
An in-premise model for Legionella exposure during showering events.
Schoen, Mary E; Ashbolt, Nicholas J
2011-11-15
An exposure model was constructed to predict the critical Legionella densities in an engineered water system that result in infection from inhalation of aerosols containing the pathogen while showering. The model predicted the Legionella densities in the shower air, water and in-premise plumbing biofilm that might result in a deposited dose of Legionella in the alveolar region of the lungs associated with infection for a routine showering event. Processes modeled included the detachment of biofilm-associated Legionella from the in-premise plumbing biofilm during a showering event, the partitioning of the pathogen from the shower water to the air, and the inhalation and deposition of particles in the lungs. The range of predicted critical Legionella densities in the air and water was compared to the available literature. The predictions were generally within the limited set of observations for air and water, with the exception of Legionella density within in-premise plumbing biofilms, for which there remains a lack of observations for comparison. Sensitivity analysis of the predicted results to possible changes in the uncertain input parameters identified the target deposited dose associated with infections, the pathogen air-water partitioning coefficient, and the quantity of detached biofilm from in-premise pluming surfaces as important parameters for additional data collection. In addition, the critical density of free-living protozoan hosts in the biofilm required to propagate the infectious Legionella was estimated. Together, this evidence can help to identify critical conditions that might lead to infection derived from pathogens within the biofilms of any plumbing system from which humans may be exposed to aerosols. Published by Elsevier Ltd.
Meier, Brian P; D'Agostino, Paul R; Elliot, Andrew J; Maier, Markus A; Wilkowski, Benjamin M
2012-01-01
A basic premise of the recently proffered color-in-context model is that the influence of color on psychological functioning varies as a function of the psychological context in which color is perceived. Some research has examined the appetitive and aversive implications of viewing the color red in romance- and achievement-relevant contexts, respectively, but in all existing empirical work approach and avoidance behavior has been studied in separate tasks and separate experiments. Research is needed to directly test whether red influences the same behavior differently depending entirely on psychological context. The present experiment was designed to put this premise to direct test in romance- and achievement-relevant contexts within the same experimental paradigm involving walking behavior. Our results revealed that exposure to red (but not blue) indeed has differential implications for walking behavior as a function of the context in which the color is perceived. Red increased the speed with which participants walked to an ostensible interview about dating (a romance-relevant context), but decreased the speed with which they walked to an ostensible interview about intelligence (an achievement-relevant context). These results are the first direct evidence that the influence of red on psychological functioning in humans varies by psychological context. Our findings contribute to both the literature on color psychology and the broader, emerging literature on the influence of context on basic psychological processes.
Fluidic Spacetime and Representation of Fields in the Tri-Space Model of the Universe
NASA Astrophysics Data System (ADS)
Meholic, Gregory V.
2009-03-01
The Tri-Space Model of the universe (see Meholic, 1998 and 2004) is based upon the premise that the governing mathematics of special relativity describe a symmetrical continuum that supports not just one, but three, independent spacetimes each with a unique set of physical laws founded on the velocity v to light speed c ratio. These realms are subluminal space (where v/c<1), luminal spacetime (where v/c = 1), and superluminal space (where v/c>1) together comprising the `tri-space' universe. Although real, measurable mass can exist in both the sub- and superluminal spaces, the adjacent luminal spacetime shared by the two spaces is the realm in which all electromagnetic and gravitational fields exist. Determining the true nature of spacetime, and hence the true nature of the fundamental forces, has been the driving objective for ideas such as string theory and quantum mechanics. The Tri-Space approach, however, merges the basic premises of these ideas with the philosophy that the three spatial realms, especially luminal spacetime, can be represented as a quasi-fluidic continuum whose behavior can be approximated through modified classical fluid-dynamic analogies with flow field structure and fluid properties. If the fluid-like properties of spacetime can be sufficiently defined, then a graphical representation of the fundamental structure and characterization of the basic forces in nature can be developed.
NASA Astrophysics Data System (ADS)
Kwon, Young Joo; Choi, Jong Won
This paper presents the finite element stress analysis of a spent nuclear fuel disposal canister to provide basic information for dimensioning the canister and configuration of canister components and consequently to suggest the structural analysis methodology for the disposal canister in a deep geological repository which is nowadays very important in the environmental waste treatment technology. Because of big differences in the pressurized water reactor (PWR) and the Canadian deuterium and uranium reactor (CANDU) fuel properties, two types of canisters are conceived. For manufacturing, operational reasons and standardization, however, both canisters have the same outer diameter and length. The construction type of canisters introduced here is a solid structure with a cast insert and a corrosion resistant overpack. The structural stress analysis is carried out using a finite element analysis code, NISA, and focused on the structural strength of the canister against the expected external pressures due to the swelling of the bentonite buffer and the hydrostatic head. The canister must withstand these large pressure loads. Consequently, canisters presented here contain 4 PWR fuel assemblies and 33×9 CANDU fuel bundles. The outside diameter of the canister for both fuels is 122cm and the cast insert diameter is 112cm. The total length of the canister is 483cm with the lid/bottom and the outer shell of 5cm.
NASA Technical Reports Server (NTRS)
Davis, Dennis D. (Inventor)
1996-01-01
A pad for cleaning up liquid spills is described which contains a porous surface covering, and an absorbent interior containing chemically reactive reagents for neutralizing noxious chemicals within the spilled liquid. The porous surface and the absorbent component would normally consist of chemically resistant materials allowing tentative spill to pass. The absorbent interior which contains the neutralizing reagents can but is not required to be chemically resilient and conducts the liquid chemically reactive reagents where the dangerous and undesirable chemicals within the chemical spill are then neutralized as well as removed from the premises.
An in-premise model for Legionella exposure during showering events
An exposure model was constructed to predict the critical Legionella densities in an engineered water system that might result in infection from inhalation of aerosols containing the pathogen while showering. The model predicted the Legionella densities in the shower air, water ...
NASA Technical Reports Server (NTRS)
Bishop, J. L.; Murchie, S.; Pieters, C.; Zent, A.
1999-01-01
This model is one of many possible scenarios to explain the generation of the current surface material on Mars using chemical, magnetic and spectroscopic data from Mars and geologic analogs from terrestrial sites. One basic premise is that there are physical and chemical interactions of the atmospheric dust particles and that these two processes create distinctly different results. Physical processes distribute dust particles on rocks, forming physical rock coatings, and on the surface between rocks forming soil units; these are reversible processes. Chemical reactions of the dust/soil particles create alteration rinds on rock surfaces or duricrust surface units, both of which are relatively permanent materials. According to this model the mineral components of the dust/soil particles are derived from a combination of "typical" palagonitic weathering of volcanic ash and hydrothermally altered components, primarily from steam vents or fumeroles. Both of these altered materials are composed of tiny particles, about 1 micron or smaller, that are aggregates of silicates and iron oxide/oxyhydroxide/sulfate phases. Additional information is contained in the original extended abstract.
Liquefied natural gas fuel use : basic training manual
DOT National Transportation Integrated Search
1994-05-01
The Urban Mass Transportation Administration's Alternative Fuel Initiative and the Environmental Protection Agency's 1991 regulations on transit bus exhaust emissions has resulted in a number of alternative fueled transit bus research and demonstrati...
'Einselection' of pointer observables: The new H-theorem?
NASA Astrophysics Data System (ADS)
Kastner, Ruth E.
2014-11-01
In attempting to derive irreversible macroscopic thermodynamics from reversible microscopic dynamics, Boltzmann inadvertently smuggled in a premise that assumed the very irreversibility he was trying to prove: 'molecular chaos'. The program of 'einselection' (environmentally induced superselection) within Everettian approaches faces a similar 'Loschmidt's Paradox': the universe, according to the Everettian picture, is a closed system obeying only unitary dynamics, and it therefore contains no distinguishable environmental subsystems with the necessary 'phase randomness' to effect einselection of a pointer observable. The theoretically unjustified assumption of distinguishable environmental subsystems is the hidden premise that makes the derivation of einselection circular. In effect, it presupposes the 'emergent' structures from the beginning. Thus the problem of basis ambiguity remains unsolved in Everettian interpretations.
NASA Technical Reports Server (NTRS)
Davis, Dennis D. (Inventor)
1997-01-01
A pad for cleaning up liquid spills is described which contains a porous surface covering, and an absorbent interior containing chemically reactive reagents for neutralizing noxious chemicals within the spilled liquid. The porous surface and the absorbent component would normally consist of chemically resistant materials allowing tentative spill to pass. The absorbent interior which contains the neutralizing reagents can but is not required to be chemically resilient and conducts the liquid chemical spill towards the absorbent interior containing the chemically reactive reagents where the dangerous and undesirable chemicals within the chemical spill are then neutralized as well as removed from the premises.
Linking HRD Practice and Research.
ERIC Educational Resources Information Center
1999
This document contains four symposium papers on linking human resource development (HRD) theory and practice. "Partnership Research: Ensuring More Useful HRD Collaborations" (Ronald L. Jacobs), which proceeds from the premise that most HRD research has limited impact on practice because research problems are usually generated devoid of a…
Code of Federal Regulations, 2010 CFR
2010-04-01
... TREASURY LIQUORS EXPORTATION OF ALCOHOL Exportation of Wine With Benefit of Drawback § 28.211 General. Wines manufactured, produced, bottled in bottles packed in containers, or packaged in casks or other... which are filled on premises qualified under this chapter to package or bottle wines, may, subject to...
19 CFR 19.13 - Requirements for establishment of warehouse.
Code of Federal Regulations, 2010 CFR
2010-04-01
...; DEPARTMENT OF THE TREASURY CUSTOMS WAREHOUSES, CONTAINER STATIONS AND CONTROL OF MERCHANDISE THEREIN... secured area separated from the remainder of the premises to be used exclusively for the storage of imported merchandise, domestic spirits, and merchandise subject to internal-revenue tax transferred into...
NASA Technical Reports Server (NTRS)
Hicks, Yolanda R.; Tedder, Sarah A.; Anderson, Robert C.
2016-01-01
This paper presents results from tests in a flame tube facility, where a bio-derived alternate fuel was compared with JP-8 for emissions and general combustion performance. A research version of General Electric Aviation (GE) TAPS injector was used for the tests. Results include combustion efficiency from gaseous emission measurements, 2D planar laser-based imaging as well as basic flow visualization of the flame. Four inlet test conditions were selected that simulate various engine power conditions relevant to NASA Fundamental Aeronautics Supersonics Project and Environmentally Responsible Aviation Program. One inlet condition was a pilot-only test point. The other three inlet conditions incorporated fuel staging via a split between the pilot and main circuits of either 10%/90% or 20%/80%. For each engine power condition, three fuel mixes were used: 100% JP-8; 100% alternative; and a blend of the two, containing 75% alternative. Results for the inlet cases that have fuel split between pilot and main, indicate that fuel from the pilot appears to be evaporated by the time it reaches the dome exit. Main circuit liquid evaporates within a downstream distance equal to annulus height, no matter the fuel. Some fuel fluorescence images for a 10%/90% fuel staging case show a distinct difference between JP-8 and bio-derived fuel. OH PLIF results indicate that OH forms in a region more centrally-located for the JP-8 case downstream of the pilot, in its central recirculation region (CRZ). For the bio-derived Hydrotreated Renewable Jet (HRJ) fuel, however, we do not see much OH in the CRZ. The OH image structure near the dome exit is similar for the two fuels, but farther downstream the OH in the CRZ is much more apparent for the JP-8 than for the alternate fuel. For all conditions, there was no discernable difference between fuel types in combustion efficiency or emissions.
49 CFR 393.68 - Compressed natural gas fuel containers.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 5 2010-10-01 2010-10-01 false Compressed natural gas fuel containers. 393.68... AND ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.68 Compressed natural gas fuel containers. (a) Applicability. The rules in this section apply to compressed natural gas (CNG) fuel...
49 CFR 393.68 - Compressed natural gas fuel containers.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 5 2011-10-01 2011-10-01 false Compressed natural gas fuel containers. 393.68... AND ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.68 Compressed natural gas fuel containers. (a) Applicability. The rules in this section apply to compressed natural gas (CNG) fuel...
NASA Technical Reports Server (NTRS)
Yates, W. J.
1981-01-01
The geographic climatic, political, economic and demographic environment of 75 countries was analyzed with respect to helicopter procurement history and usage. Key environmental indicators which are variables were projected into strengths and weaknesses of U.S. technology are reviewed. The civil market sensitivity to new technology is forecast with selected premises as to vehicle life, noise standards, fuel costs, GNP expansion and traffic growth. The forecast is based on a scenario of helicopter technology improvements resulting in increased size and performance.
Storage and handling of aviation fuels at airports
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1988-01-01
This standard covers the basic principles for the design of fuel handling facilities and equipment at airports. It provides a reference for the planning and operation of aviation fuel handling facilities and associated equipment.
Romero-Vivas, C M E; Arango-Padilla, P; Falconar, A K I
2006-04-01
Surveys were conducted in three neighbourhoods of Barranquilla, the main seaport of Colombia, to identify, using counts of pupae in water containers during the wet and dry seasons, the most productive Aedes aegypti breeding sites. Overall, 3,433 premises were investigated in the wet season and 3,563 in the dry, representing, respectively, 82.3% and 84.6% of the total numbers of premises in the study areas. Despite a reasonably reliable supply of piped water, there were still some large storage containers for domestic water (cement ground tanks and plastic, metal and cement drums) in the area. Although such containers represented only 1.8%-16.3% of the total number of containers observed, they contributed 72.0%-78.2% and 65.0%-95.8% of the total Ae. aegypti pupal population in the three study neighbourhoods during the wet and dry seasons, respectively. In contrast, bottles represented 23.0%-88.9% of the total number of containers but produced no more than 0.1% of the total Ae aegypti pupal populations in these neighbourhoods. Other containers (tyres, vases, 'other discarded' and 'other used') generally produced only low numbers of pupae. In some settings, however, containers in the 'other discarded' category could contribute up to 19% of the total pupal population, and in one survey of one neighbourhood a single container in this category held 9.1% of all the pupae collected. These results, from a city where dengue fever is endemic, will help to focus local campaigns for Ae. aegypti source-reduction on the most productive categories of container.
Making IBM's Computer, Watson, Human
Rachlin, Howard
2012-01-01
This essay uses the recent victory of an IBM computer (Watson) in the TV game, Jeopardy, to speculate on the abilities Watson would need, in addition to those it has, to be human. The essay's basic premise is that to be human is to behave as humans behave and to function in society as humans function. Alternatives to this premise are considered and rejected. The viewpoint of the essay is that of teleological behaviorism. Mental states are defined as temporally extended patterns of overt behavior. From this viewpoint (although Watson does not currently have them), essential human attributes such as consciousness, the ability to love, to feel pain, to sense, to perceive, and to imagine may all be possessed by a computer. Most crucially, a computer may possess self-control and may act altruistically. However, the computer's appearance, its ability to make specific movements, its possession of particular internal structures (e.g., whether those structures are organic or inorganic), and the presence of any nonmaterial “self,” are all incidental to its humanity. PMID:22942530
Making IBM's Computer, Watson, Human.
Rachlin, Howard
2012-01-01
This essay uses the recent victory of an IBM computer (Watson) in the TV game, Jeopardy, to speculate on the abilities Watson would need, in addition to those it has, to be human. The essay's basic premise is that to be human is to behave as humans behave and to function in society as humans function. Alternatives to this premise are considered and rejected. The viewpoint of the essay is that of teleological behaviorism. Mental states are defined as temporally extended patterns of overt behavior. From this viewpoint (although Watson does not currently have them), essential human attributes such as consciousness, the ability to love, to feel pain, to sense, to perceive, and to imagine may all be possessed by a computer. Most crucially, a computer may possess self-control and may act altruistically. However, the computer's appearance, its ability to make specific movements, its possession of particular internal structures (e.g., whether those structures are organic or inorganic), and the presence of any nonmaterial "self," are all incidental to its humanity.
NASA Astrophysics Data System (ADS)
Morrison, Christopher
Nuclear fuels with similar aggregate material composition, but with different millimeter and micrometer spatial configurations of the component materials can have very different safety and performance characteristics. This research focuses on modeling and attempting to engineer heterogeneous combinations of nuclear fuels to improve negative prompt temperature feedback in response to reactivity insertion accidents. Improvements in negative prompt temperature feedback are proposed by developing a tailored thermal resistance in the nuclear fuel. In the event of a large reactivity insertion, the thermal resistance allows for a faster negative Doppler feedback by temporarily trapping heat in material zones with strong absorption resonances. A multi-physics simulation framework was created that could model large reactivity insertions. The framework was then used to model a comparison of a heterogeneous fuel with a tailored thermal resistance and a homogeneous fuel without the tailored thermal resistance. The results from the analysis confirmed the fundamental premise of prompt temperature feedback and provide insights into the neutron spectrum dynamics throughout the transient process. A trade study was conducted on infinite lattice fuels to help map a design space to study and improve prompt temperature feedback with many results. A multi-scale fuel pin analysis was also completed to study more realistic geometries. The results of this research could someday allow for novel nuclear fuels that would behave differently than current fuels. The idea of having a thermal barrier coating in the fuel is contrary to most current thinking. Inherent resistance to reactivity insertion accidents could enable certain reactor types once considered vulnerable to reactivity insertion accidents to be reevaluated in light of improved negative prompt temperature feedback.
Method for converting hydrocarbon fuel into hydrogen gas and carbon dioxide
Clawson, Lawrence G.; Mitchell, William L.; Bentley, Jeffrey M.; Thijssen, Johannes H. J.
2000-01-01
A method for converting hydrocarbon fuel into hydrogen gas and carbon dioxide within a reformer 10 is disclosed. According to the method, a stream including an oxygen-containing gas is directed adjacent to a first vessel 18 and the oxygen-containing gas is heated. A stream including unburned fuel is introduced into the oxygen-containing gas stream to form a mixture including oxygen-containing gas and fuel. The mixture of oxygen-containing gas and unburned fuel is directed tangentially into a partial oxidation reaction zone 24 within the first vessel 18. The mixture of oxygen-containing gas and fuel is further directed through the partial oxidation reaction zone 24 to produce a heated reformate stream including hydrogen gas and carbon monoxide. Steam may also be mixed with the oxygen-containing gas and fuel, and the reformate stream from the partial oxidation reaction zone 24 directed into a steam reforming zone 26. High- and low-temperature shift reaction zones 64,76 may be employed for further fuel processing.
A Stable Polymer Burnable Poison Material With Special Attributes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tulenko, James S.; Baney, Ronald H.; Pressley, Linda
2002-07-01
The University of Florida (UF) is carrying out basic research on a new class of thermally stable boron containing materials which appear to have special properties that will greatly enhance the performance of Burnable Poison Rod Assemblies (BPRA) and also Spent Fuel Containers (SFC). This new material ('Carborane') has the special properties of containing a tailored amount of boron, an extremely high hydrogen content, and being extremely stable to high temperatures. 'Carborane' reduces the water displacement penalty by 59% by the hydrogen present in the 'Carborane'. In addition to increasing safety margins, a cost benefit of approximately $500,000 per two-yearmore » cycle is projected from reduced enrichments, resulting from the use of this burnable poison material, making it no longer necessary to offset the water displacement reactivity penalty. This research program is supported by a Department of Energy NEER grant. (authors)« less
Radiolytic and Thermal Process Relevant to Dry Storage of Spent Nuclear Fuels
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marschman, Steven C.; Haustein, Peter E.; Madey, Theodore E.
1999-06-01
This project involves basic research in chemistry and physics aimed at providing information pertinent to the safe long-term dry storage of spent nuclear fuel (SNF), thousands of tons of which remain in water storage across the DOE complex. The Hanford Site K-Basins alone hold 2300 tons of spent fuel, much of it severely corroded, and similar situations exist at Savannah River and Idaho National Engineering and Environmental Laboratory. DOE plans to remove this fuel and seal it in overpack canisters for ''dry'' interim storage for up to 75 years while awaiting permanent disposition. Chemically bound water will remain in thismore » fuel even after the proposed drying steps, leading to possible long-term corrosion of the containers and/or fuel rods themselves, generation of H2 and O2 gas via radiolysis (which could lead to deflagration or detonation), and reactions of pyrophoric uranium hydrides. No thoroughly tested model is now available to predict fuel behavior during preprocessing, processing, or storage. In a collaborative effort among Rutgers University, Pacific Northwest National Laboratory, and Brookhaven National Laboratory, we are studying the radiolytic reaction, drying processes, and corrosion behavior of actual SNF materials and of pure and mixed-phase samples. We propose to determine what is omitted from current models: radiolysis of water adsorbed on or in hydrates or hydroxides, thermodynamics of interfacial phases, and kinetics of drying. A model will be developed and tested against actual fuel rod behavior to ensure validity and applicability to the problems associated with developing dry storage strategies for DOE-owned SNF.« less
40 CFR 59.615 - How must I label and identify the portable fuel containers I produce?
Code of Federal Regulations, 2010 CFR
2010-07-01
... portable fuel containers I produce? 59.615 Section 59.615 Protection of Environment ENVIRONMENTAL... FOR CONSUMER AND COMMERCIAL PRODUCTS Control of Evaporative Emissions From New and In-Use Portable... portable fuel containers I produce? This section describes how you must label your portable fuel containers...
46 CFR 182.470 - Ventilation of spaces containing diesel fuel tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Ventilation of spaces containing diesel fuel tanks. 182... Ventilation of spaces containing diesel fuel tanks. (a) Unless provided with ventilation that complies with § 182.465, a space containing a diesel fuel tank and no machinery must meet the requirements of this...
46 CFR 182.470 - Ventilation of spaces containing diesel fuel tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel fuel tanks. 182... Ventilation of spaces containing diesel fuel tanks. (a) Unless provided with ventilation that complies with § 182.465, a space containing a diesel fuel tank and no machinery must meet the requirements of this...
[Research and workshop on alternative fuels for aviation. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1999-09-01
The Renewable Aviation Fuels Development Center (RAFDC) at Baylor University was granted U. S. Department of Energy (US DOE) and Federal Aviation Administration (FAA) funds for research and development to improve the efficiency in ethanol powered aircraft, measure performance and compare emissions of ethanol, Ethyl Tertiary Butyl Ether (ETBE) and 100 LL aviation gasoline. The premise of the initial proposal was to use a test stand owned by Engine Components Inc. (ECI) based in San Antonio, Texas. After the grant was awarded, ECI decided to close down its test stand facility. Since there were no other test stands available atmore » that time, RAFDC was forced to find additional support to build its own test stand. Baylor University provided initial funds for the test stand building. Other obstacles had to be overcome in order to initiate the program. The price of the emission testing equipment had increased substantially beyond the initial quote. Rosemount Analytical Inc. gave RAFDC an estimate of $120,000.00 for a basic emission testing package. RAFDC had to find additional funding to purchase this equipment. The electronic ignition unit also presented a series of time consuming problems. Since at that time there were no off-the-shelf units of this type available, one had to be specially ordered and developed. FAA funds were used to purchase a Super Flow dynamometer. Due to the many unforeseen obstacles, much more time and effort than originally anticipated had to be dedicated to the project, with much of the work done on a volunteer basis. Many people contributed their time to the program. One person, mainly responsible for the initial design of the test stand, was a retired engineer from Allison with extensive aircraft engine test stand experience. Also, many Baylor students volunteered to assemble the. test stand and continue to be involved in the current test program. Although the program presented many challenges, which resulted in delays, the RAFDC's test stand is an asset which provides an ongoing research capability dedicated to the testing of alternative fuels for aircraft engines. The test stand is now entirely functional with the exception of the electronic ignition unit which still needs adjustments.« less
Algorithm Estimates Microwave Water-Vapor Delay
NASA Technical Reports Server (NTRS)
Robinson, Steven E.
1989-01-01
Accuracy equals or exceeds conventional linear algorithms. "Profile" algorithm improved algorithm using water-vapor-radiometer data to produce estimates of microwave delays caused by water vapor in troposphere. Does not require site-specific and weather-dependent empirical parameters other than standard meteorological data, latitude, and altitude for use in conjunction with published standard atmospheric data. Basic premise of profile algorithm, wet-path delay approximated closely by solution to simplified version of nonlinear delay problem and generated numerically from each radiometer observation and simultaneous meteorological data.
Methodology for testing and validating knowledge bases
NASA Technical Reports Server (NTRS)
Krishnamurthy, C.; Padalkar, S.; Sztipanovits, J.; Purves, B. R.
1987-01-01
A test and validation toolset developed for artificial intelligence programs is described. The basic premises of this method are: (1) knowledge bases have a strongly declarative character and represent mostly structural information about different domains, (2) the conditions for integrity, consistency, and correctness can be transformed into structural properties of knowledge bases, and (3) structural information and structural properties can be uniformly represented by graphs and checked by graph algorithms. The interactive test and validation environment have been implemented on a SUN workstation.
A Computer-Based Educational Approach to the Air Command and Staff College Associate Program
1985-04-01
control interactive vid e o, grade student responses and perform some analysis on the dat a . Its main advantages lie in the ability of the author to...basic goal of provid- ing the instructor with assitance in the development of good CBE. One way of viewing the different tools on the market is to...ractice , tutorials and simple games all have as their premise the computer replacing the teacher in a one-on-one en- counter. The other modes, simulation
NASA Astrophysics Data System (ADS)
Huzvar, Jozef; Kapjor, Andrej
2011-06-01
This article deals with combined production of heat and electricity for small premises, such as households, where energy consumption is around few kilowatts. This proposal of micro co-generation unit uses as a heat source an automatic burner for combustion of wood pellets. Construction of an equipment for the heat transport can be designed using different basic ways of heat transfer. Electricity is produced by the two-stroke steam engine and the generator.
Defense AT&L (Volume 35, Number 3, May-June 2006)
2006-06-01
challenges of the new era? How do we align our inherent qualities of success to our new role?” Photographs by Dirke Williams, OUSD(AT&L). Q What is your...this is the part where we would jump up, slap the table, and shout “Objection! We reject the premise of these questions! Opposing counsel is basically...Dollars ($M) 99 00 01 02 03 FY NASA Agriculture HHS Energy DoD Annual Income from Invention Licenses by Department Source: 2004 Summary Report on Federal
Cost and efficiency lead to increased value for the patient and bottom line for the practice.
Dahl, Owen J
2009-01-01
Understanding how much it costs to provide a service is a basic premise of any business. In addition, healthcare is in need of improved processes to provide and increase value to the patient. This can be accomplished by the application of principles called Six Sigma and Lean Management. Today's medical practice leader must be aware of the costs of doing business and be able to apply proven management principles to the processes involved in providing patient care.
26 CFR 48.4041-18 - Fuels containing alcohol.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Fuels containing alcohol. 48.4041-18 Section 48... EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Special Fuels § 48.4041-18 Fuels containing alcohol..., of any liquid fuel described in section 4041(a) (1) or (2) which consists of at least 10% alcohol by...
26 CFR 48.4041-18 - Fuels containing alcohol.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Fuels containing alcohol. 48.4041-18 Section 48... EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Special Fuels § 48.4041-18 Fuels containing alcohol..., of any liquid fuel described in section 4041(a) (1) or (2) which consists of at least 10% alcohol by...
49 CFR 172.336 - Identification numbers; special provisions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...
49 CFR 172.336 - Identification numbers; special provisions.
Code of Federal Regulations, 2012 CFR
2012-10-01
... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...
49 CFR 172.336 - Identification numbers; special provisions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...
The microbiological quality of ready-to-eat foods with added spices.
Little, C L; Omotoye, R; Mitchell, R T
2003-03-01
A microbiological study of ready-to-eat foods with added spices or spice ingredients was undertaken to identify any risk factors in the production, storage and display of this product and to establish their effect on microbiological quality. Examination of 1946 ready-to-eat foods from sandwich bars, cafés, public houses, restaurants, specialist sandwich producers, bakers, delicatessens, market stalls and mobile vendors found that 1291 (66%) were of satisfactory/acceptable microbiological quality, 609 (32%) were of unsatisfactory quality, and 46 (2%) were of unacceptable quality. Unacceptable results were due to high levels of B. cereus and/or other Bacillus spp. (>/=10(5) cfu g(-1)). Unsatisfactory results were mostly due to high Aerobic Colony Counts (up to >/=10(7) cfu g(-1)), Enterobacteriaceae (>/=10(4) cfu g(-1)), Escherichia coli (>/=10(2) cfu g(-1)), and Bacillus spp (>/=10(4) cfu g(-1)). Examination of 750 spices and spice ingredients revealed that B. cereus were present in 142 (19%) samples, other Bacillus spp. in 399 (53%) samples, and Salmonella spp. (S. enteritidis PT 11) in one (<1%) sample. Approximately a third (222) of spice and spice ingredients examined contained high counts (>/=10(4) cfu g(-1)) of B. cereus and/or other Bacillus spp., and appeared to be associated with the corresponding ready-to-eat foods containing similar high counts of these organisms (P<0.0001). Acceptable microbiological quality of ready-to-eat foods to which spices or spice ingredients have been added was associated with premises that had management food hygiene training and hazard analysis in place. Poor microbiological quality was associated with preparation on the premises, premises type, little or no confidence in the food business management of food hygiene, and small premises as indicated by local authority inspectors' confidence in management and consumer at risk scores.
Alternative Fuels Data Center: Vehicle Conversion Basics
engine is one modified to use a different fuel or power source than the one for which it was originally ; configurations, meaning they operate exclusively on one alternative fuel. They can also be converted to "bi -fuel" configurations that have two separate tanks-one for conventional fuel and another for an
Myths about Technology-Supported Professional Learning
ERIC Educational Resources Information Center
Killion, Joellen; Treacy, Barbara
2014-01-01
The future of professional learning is shaped by its present and past. As new technologies emerge to increase affordability, access, and appropriateness of professional learning, three beliefs are visible in current practices related to online learning. Each contains a premise that merits identification and examination. The authors call these…
Reply to ``Comment on `Suppression of chaos by resonant parametric perturbations' ''
NASA Astrophysics Data System (ADS)
Lima, Ricardo; Pettini, Marco
1993-06-01
The preceding Comment [Cuadros and Chacón, Phys. Rev. E 47, 4628 (1993)] on the paper by Lima and Pettini [Phys. Rev. A 41, 726 (1990)] contains a correct premise; however, erroneous consequences are drawn from it. In this Reply we explain why.
Inference and Children's Comprehension of Pronouns.
ERIC Educational Resources Information Center
Wykes, Til
1981-01-01
Investigated five-year-olds' abilities to determine the reference of anaphoric pronouns. Children had difficulty when a sentence contained more than one pronoun, especially when assigning the reference of a pronoun requiring an inference. The children's difficulties stemmed from forgetting premise information and from having problems in carrying…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-10
... conducted by ``a licensed professional engineer or foreign equivalent who works in the chemical engineering... chemical engineering field. EPA views renewable fuel production to fall generally within the chemical... basic organic chemical manufacturers. Industry 424690 5169 Chemical and allied products merchant...
Alternative Fuels Data Center: Electricity
efficiency. Using electricity to power vehicles can have significant energy security and emissions benefits . Icon of an information sign. Basics Find information about using electricity as a vehicle fuel Considerations Explore the benefits and considerations of using electricity as a vehicle fuel. Icon of a fueling
Application for certification for 1979 model year for light-duty vehicles - Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less
Application for certification, 1986 model year light-duty vehicles - Volkswagen/Audi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification, 1993 model-year light-duty trucks - Grumman Olson
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1992-01-01
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty trucks from Grumman Olson Company. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirementsmore » to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification, 1992 model-year light-duty vehicles - Grumman Olson
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1991-01-01
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines that he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of themore » application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Application for certification for 1979 model year for light-duty vehicles - Peugeot
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Qualitative Importance Measures of Systems Components - A New Approach and Its Applications
NASA Astrophysics Data System (ADS)
Chybowski, Leszek; Gawdzińska, Katarzyna; Wiśnicki, Bogusz
2016-12-01
The paper presents an improved methodology of analysing the qualitative importance of components in the functional and reliability structures of the system. We present basic importance measures, i.e. the Birnbaum's structural measure, the order of the smallest minimal cut-set, the repetition count of an i-th event in the Fault Tree and the streams measure. A subsystem of circulation pumps and fuel heaters in the main engine fuel supply system of a container vessel illustrates the qualitative importance analysis. We constructed a functional model and a Fault Tree which we analysed using qualitative measures. Additionally, we compared the calculated measures and introduced corrected measures as a tool for improving the analysis. We proposed scaled measures and a common measure taking into account the location of the component in the reliability and functional structures. Finally, we proposed an area where the measures could be applied.
Production of hydrocarbon fuels from pyrolysis of soybean oils using a basic catalyst.
Xu, Junming; Jiang, Jianchun; Sun, Yunjuan; Chen, Jie
2010-12-01
Triglycerides obtained from animals and plants have attracted great attention from researchers for developing an environmental friendly and high-quality fuel, free of nitrogen and sulfur. In the present work, the production of biofuel by catalytic cracking of soybean oil over a basic catalyst in a continuous pyrolysis reactor at atmospheric pressure has been studied. Experiments were designed to study the effect of different types of catalysts on the yield and acid value of the diesel and gasoline fractions from the pyrolytic oil. It was found that basic catalyst gave a product with relatively low acid number. These pyrolytic oils were also further reacted with alcohol in order to decrease their acid value. After esterification, the physico-chemical properties of these biofuels were characterized, and compared with Chinese specifications for conventional diesel fuels. The results showed that esterification of pyrolytic oil from triglycerides represents an alternative technique for producing biofuels from soybean oils with characteristics similar to those of petroleum fuels. Published by Elsevier Ltd.
Energy Security: From Deal Killers to Game Changers
NASA Astrophysics Data System (ADS)
Cooke, Charlie
2010-03-01
Five energy security ``deal killers" are identified: 1) Global warming and CO2 emissions from fossil fuel combustion; 2) Intermittent energy sources (wind, solar) and the presence and stability of the grid; 3) Penetration of plant defenses to produce transportation fuels from biomass; 4) Mimicking nature: artificial photosynthesis for solar energy to fuels; and 5) Spent fuel from nuclear power reactors. Transformational basic research is required to successfully change the ground rules, to transform these ``deal killers" into ``game changers." T hey are: 1) Offsetting carbon capture and storage costs through enhanced oil recovery and methane generation from high temperature geothermal saline aquifers; 2) Electrical energy storage, through batteries and super-capacitors; 3) Genetic modification of plant cell walls, and catalytic methods for transforming plant sugars into fuels; 4) Separation of solar-induced electrons from holes, and catalysis to produce fuels; and 5) Closing the nuclear fuel cycle. Basic research can revolutionize our approach to carbon-free energy by enhancing nature to achieve energy security.
TREAT Neutronics Analysis and Design Support, Part I: Multi-SERTTA
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bess, John D.; Woolstenhulme, Nicolas E.; Hill, Connie M.
2016-08-01
Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. Calculations were performed to support analysis ofmore » a near-final design of the Multi-SERTTA vehicle, the design process for future TREAT test vehicles, and establish analytical practices for upcoming transient test experiments. Models of the Multi-SERTTA vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Calculation of the PCF for reference conditions of a PWR fuel rodlet in clean water at operational temperature and pressure provided results between 1.10 and 1.74 W/g-MW depending on the location of the four Multi-SERTTA units with the stack. Basic changes to the Multi-SERTTA secondary vessel containment and support have minimal impact on PCF; using materials with less neutron absorption can improve expected PCF values, especially in the primary containment. An optimized balance is needed between structural integrity, experiment safety, and energy deposition in the experiment. Type of medium and environmental conditions within the primary vessel surrounding the fuel rodlet can also have a significant impact on resultant PCF values. The estimated reactivity insertion worth into the TREAT core is impacted more by the primary and secondary Multi-SERTTA vehicle structure with the experiment content and contained environment having a near negligible impact on overall system reactivity. Additional calculations were performed to evaluate the peak-to-average assembly powers throughout the TREAT core, as well as the nuclear heat generation for the various structural components of the Multi-SERTTA assembly. Future efforts include the evaluation of flux collars to shape the PCF for individual Multi-SERTTA units during an experiment such as to achieve uniformity in test unit environmental conditions impacted by the non-uniform axial flux/power profile of TREAT. Upon resumption of transient testing, experimental results from both the Multi-SERTTA and Multi-SERTTA-CAL will be compared against calculational results and methods for further optimization and design strategies.« less
76 FR 70535 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-14
...-0092. Type of Review: Extension without change of a currently approved collection. Title: Marks on Wine Containers, TTB REC 5120/3. Abstract: TTB requires that wine on wine premises be identified by statements of... approved collection. Title: Certification of Proper Cellar Treatment for Imported Natural Wine. Abstract...
The Apocalyptic Premise: Nuclear Arms Debated.
ERIC Educational Resources Information Center
Lefever, Ernest W., Ed.; Hunt, E. Stephen, Ed.
This document contains 31 position papers that reflect a wide range of views on nuclear arms policy held by political leaders, religious authorities, scholars, policy experts, journalists, and political activists. Since no judgments are made, the reader is left to decide which arguments are most compelling. Each position paper is arranged into one…
When Teachers Reflect: Journeys toward Effective, Inclusive Practice.
ERIC Educational Resources Information Center
Tertell, Elizabeth A., Ed.; Klein, Susan M., Ed.; Jewett, Janet L., Ed.
On the premise that hearing other preschool teachers talk about their challenges in creating inclusive settings is a powerful impetus to reflect about one's own teaching practice, this book contains personal narratives by 18 teachers about their journeys toward inclusive, developmentally appropriate practice in early childhood education. The…
9 CFR 93.312 - Manure from quarantined horses.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Manure from quarantined horses. 93.312... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Horses § 93.312 Manure from quarantined horses. No manure shall be removed from the quarantine premises until the release of the horses producing same. ...
27 CFR 70.414 - Preparation and filing of claims.
Code of Federal Regulations, 2011 CFR
2011-04-01
... spirits plants. Procedural instructions in respect of claims for remission, abatement, credit, or refund... spirits returned to, the premises of a distilled spirits plant are contained in Part 19 of Title 27 CFR... officers from distilled spirits plants, as the appropriate TTB officer will allow credit, without claim...
Diagnostic Teaching of the Language Arts.
ERIC Educational Resources Information Center
Burns, Paul C.
This book is based on the premise that learning can best be facilitated when the teacher takes a diagnostic view of the instructional process. To further this end, each chapter contains materials, models, and techniques designed to implement diagnostic teaching in the language arts program. The seven chapters are "Foundations for Diagnostic…
Wildflowers of the Savannah River Site
T. Segar
2015-01-01
This guidebook is a resource to help field personnel (nonbotanists) identify plants on the Savannah River Site (SRS) premises. Although not a complete flora guide, this publication contains information about 123 plant species found on the SRS. Plants are listed by their common names and arranged by the color of the flower.
9 CFR 93.514 - Manure from quarantined swine.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Manure from quarantined swine. 93.514... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Swine § 93.514 Manure from quarantined swine. No manure shall be removed from the quarantine premises until the release of the swine producing same. ...
9 CFR 93.514 - Manure from quarantined swine.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Manure from quarantined swine. 93.514... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Swine § 93.514 Manure from quarantined swine. No manure shall be removed from the quarantine premises until the release of the swine producing same. ...
9 CFR 93.514 - Manure from quarantined swine.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Manure from quarantined swine. 93.514... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Swine § 93.514 Manure from quarantined swine. No manure shall be removed from the quarantine premises until the release of the swine producing same. ...
9 CFR 93.514 - Manure from quarantined swine.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Manure from quarantined swine. 93.514... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Swine § 93.514 Manure from quarantined swine. No manure shall be removed from the quarantine premises until the release of the swine producing same. ...
9 CFR 93.514 - Manure from quarantined swine.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Manure from quarantined swine. 93.514... FOR MEANS OF CONVEYANCE AND SHIPPING CONTAINERS Swine § 93.514 Manure from quarantined swine. No manure shall be removed from the quarantine premises until the release of the swine producing same. ...
75 FR 22419 - Liquor Control Ordinance of the Prairie Band Potawatomi Nation
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-28
... the premises. (c) ``Beer'' means any alcoholic beverage obtained by the alcoholic fermentation of an... Potawatomi Tribal Court. (p) ``Wine'' means any alcoholic beverage obtained by fermentation of the natural... ingredients are added during or after fermentation, and containing not more than seventeen percent of alcohol...
14 CFR 31.85 - Required basic equipment.
Code of Federal Regulations, 2012 CFR
2012-01-01
... indicator. (b) For hot air balloons: (1) A fuel quantity gauge. If fuel cells are used, means must be incorporated to indicate to the crew the quantity of fuel in each cell during flight. The means must be calibrated in appropriate units or in percent of fuel cell capacity. (2) An envelope temperature indicator...
14 CFR 31.85 - Required basic equipment.
Code of Federal Regulations, 2014 CFR
2014-01-01
... indicator. (b) For hot air balloons: (1) A fuel quantity gauge. If fuel cells are used, means must be incorporated to indicate to the crew the quantity of fuel in each cell during flight. The means must be calibrated in appropriate units or in percent of fuel cell capacity. (2) An envelope temperature indicator...
14 CFR 31.85 - Required basic equipment.
Code of Federal Regulations, 2013 CFR
2013-01-01
... indicator. (b) For hot air balloons: (1) A fuel quantity gauge. If fuel cells are used, means must be incorporated to indicate to the crew the quantity of fuel in each cell during flight. The means must be calibrated in appropriate units or in percent of fuel cell capacity. (2) An envelope temperature indicator...
14 CFR 31.85 - Required basic equipment.
Code of Federal Regulations, 2011 CFR
2011-01-01
... indicator. (b) For hot air balloons: (1) A fuel quantity gauge. If fuel cells are used, means must be incorporated to indicate to the crew the quantity of fuel in each cell during flight. The means must be calibrated in appropriate units or in percent of fuel cell capacity. (2) An envelope temperature indicator...
Meier, Brian P.; D’Agostino, Paul R.; Elliot, Andrew J.; Maier, Markus A.; Wilkowski, Benjamin M.
2012-01-01
Background A basic premise of the recently proffered color-in-context model is that the influence of color on psychological functioning varies as a function of the psychological context in which color is perceived. Some research has examined the appetitive and aversive implications of viewing the color red in romance- and achievement-relevant contexts, respectively, but in all existing empirical work approach and avoidance behavior has been studied in separate tasks and separate experiments. Research is needed to directly test whether red influences the same behavior differently depending entirely on psychological context. Methodology/Principal Findings The present experiment was designed to put this premise to direct test in romance- and achievement-relevant contexts within the same experimental paradigm involving walking behavior. Our results revealed that exposure to red (but not blue) indeed has differential implications for walking behavior as a function of the context in which the color is perceived. Red increased the speed with which participants walked to an ostensible interview about dating (a romance-relevant context), but decreased the speed with which they walked to an ostensible interview about intelligence (an achievement-relevant context). Conclusions/Significance These results are the first direct evidence that the influence of red on psychological functioning in humans varies by psychological context. Our findings contribute to both the literature on color psychology and the broader, emerging literature on the influence of context on basic psychological processes. PMID:22808136
46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Compartments containing gasoline machinery or fuel tanks... gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have natural... Standard H-2.5, “Design and Construction; Ventilation of Boats Using Gasoline. ...
46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing gasoline machinery or fuel tanks... gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have natural... Standard H-2.5, “Design and Construction; Ventilation of Boats Using Gasoline. ...
46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Compartments containing gasoline machinery or fuel tanks... gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have natural... Standard H-2.5, “Design and Construction; Ventilation of Boats Using Gasoline. ...
46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Compartments containing gasoline machinery or fuel tanks... gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have natural... Standard H-2.5, “Design and Construction; Ventilation of Boats Using Gasoline. ...
46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Compartments containing gasoline machinery or fuel tanks... gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have natural... Standard H-2.5, “Design and Construction; Ventilation of Boats Using Gasoline. ...
Predicting and measuring premises-level harm in the night-time economy.
Moore, Simon C; Brennan, Iain; Murphy, Simon
2011-01-01
To assess associations between measures of premises-level alcohol-related harm and risk factors for harm. Thirty-two licensed premises with a history of on-premises violent assault were recruited. An environmental survey of the drinking context of each premises was undertaken. Levels of patron intoxication were assessed using a breathalyser and a visual assessment of customers at each premises. Premise-level violence was identified via routine police and hospital emergency department data. Analyses examined associations between hospital and police data, surveyor and objective ratings of intoxication and the relationship between intoxication, drinking context and violence at the premises level. Hospital and police data were associated. Aggregate levels of surveyor-rated intoxication were associated with aggregate alcometer breath alcohol levels. Analyses further suggest that premises with the highest levels of violence also had customers whose entry-exit change in intoxication was greatest, were open for longer hours, had alcohol promotions and had visible security staff present. Police and hospital data can be used to identify violent premises and to assess outcomes from premises-level interventions to reduce violence. Relatively low-cost observational survey methods can be used to identify high-risk premises, and can be used as outcomes for premises-level interventions. Features of premises that promote intoxication are associated with violence, suggesting that targeting resources at risky premises will likely address two public health concerns: excessive intoxication and assault-related injury.
Liu, Xiao-Mei; Bao; Zhaorigetu; Zhuang, Xin-Ying; Que, Ling; Tian, Chang-Jiang
2013-10-01
Clinical traditional Chinese pharmacology is the subject that study of basic theory of traditional Chinese medicine, property of Chinese materia medica and clinical application. The study on the standardization research of the terminology of clinical traditional Chinese pharmacology is an important premise and foundation to standardization, modernization and internationalization, informationization construction of clinical traditional Chinese pharmacology and is also the important content of the subject construction. To provide some exploring ideas for clinical traditional Chinese pharmacology noun terminology standardization, this article elaborates the concept of strengthening Yin with bitter-flavor herbs in several aspects, such as connotation and the historical origin, the clinical application in the traditional, modern clinic application, and the modern basic research and so on.
Hitchens, Peta L; Hultgren, Jan; Frössling, Jenny; Emanuelson, Ulf; Keeling, Linda J
2016-10-20
There are Swedish animal welfare regulations concerning the body condition of horses and general advice on keeping horses including that horses should be fed so that they do not become over- or underweight relative to their use. Compliance is assessed by official animal welfare inspectors. The objective of this study was to determine whether the national animal welfare control database could be used to estimate the prevalence and risk factors for overweight horses in Sweden. The official animal welfare control checklist for horses contains 45 checkpoints (CP) of which CP-8 pertains to the acceptability of the horses' body condition including whether they were under- or overweight. Prevalence of non-compliance with CP-8, with 95 % confidence intervals (CI), were calculated for the years 2010-2013. Associations between risk factors and non-compliance for overweight body condition were estimated using logistic regression and expressed as odds ratios (OR) with 95 % CIs. Of 7870 premises with registered horses that were inspected against CP-8, a total of 63 premises had non-compliant inspections due to overweight horses (0.80 %; CI 0.62, 1.02 %). In multivariable analyses, premises that were non-compliant with requirements for the care of sick or injured horses (OR 3.52; CI 1.51, 8.22) or with the requirements for feeding a balanced high-quality diet (OR 5.15; CI 2.49, 10.67) had greater odds of having overweight horses. Premises that also kept other species for meat production were more likely to have overweight horses (OR 2.12; CI 1.18, 3.81) whereas professional horse establishments were less likely (OR 0.09; 0.01, 0.64). Overweight horses were more likely in summer compared to winter (OR 2.18; CI 1.02, 4.70). Premises in regions of Sweden with more horses in relation to the human population were less likely to have overweight horses (OR 0.97; CI 0.95, 1.00). Official animal welfare control data may be used to monitor the premises prevalence of overweight horses in Sweden. Strategies to reduce the prevalence of overweight horses should focus on education about equine care and nutrition, especially summer grazing.
Hitchens, P L; Hultgren, J; Frössling, J; Emanuelson, U; Keeling, L J
2017-07-01
Determining welfare status in a population is the first step in efforts to improve welfare. The primary objective of this study was to explore a new epidemiological approach for analysis of data from official competent authorities that pertain to compliance with animal welfare legislation. We reviewed data already routinely collected as part of Swedish official animal welfare inspections for 2010-13, using a checklist containing 45 checkpoints (CPs). These covered animal-, resource- and management-based measures of equine welfare. The animal-based CPs were measures that directly related to the animal and included social contact, body condition, hoof condition and cleanliness. Non-compliance with one or more of the animal-based CPs was used as a binary outcome of poor equine welfare; 95% confidence intervals (CI) were estimated using the exact binomial distribution. Associations were determined using multivariable logistic regression, adjusting for clustering on premises. Resource- and management-based CPs (model inputs) were reduced by principal component analysis. Other input factors included premises characteristics (e.g. size, location) and inspection characteristics (e.g. type of inspection). There were 30 053 premises with horses from 21 counties registered by the Swedish Board of Agriculture. In total 13 321 inspections of premises were conducted at 28.4% (n=8532) of all registered premises. For random inspections, the premises-prevalence of poor equine welfare was 9.5% (95% CI 7.5, 11.9). Factors associated with poor equine welfare were non-compliance with requirements for supervision, care or feeding of horses, facility design, personnel, stable hygiene, pasture and exercise area maintenance, as well as the owner not being notified of the inspection, a previous complaint or deficiency, spring compared with autumn, and not operating as a professional equine business. Horses at premises compliant with stabling and shelter requirements had significantly better welfare if they also complied with documentation requirements. We present a novel approach for analysis of equine welfare data from regulatory inspections by the official competent authorities, and propose on-going analyses and benchmarking of trends in animal-based measures over time. We also suggest how such a database could be further improved to facilitate future epidemiological analyses of risk factors associated with poor equine welfare. The study has implications for other competent authorities and researchers collaborating in the area of animal welfare epidemiology.
Christie, Simon; Raper, David; Lee, David S; Williams, Paul I; Rye, Lucas; Blakey, Simon; Wilson, Chris W; Lobo, Prem; Hagen, Donald; Whitefield, Philip D
2012-06-05
We report on the particulate-bound polycyclic aromatic hydrocarbons (PAH) in the exhaust of a test-bed gas turbine engine when powered by Jet A-1 aviation fuel and a number of alternative fuels: Sasol fully synthetic jet fuel (FSJF), Shell gas-to-liquid (GTL) kerosene, and Jet A-1/GTL 50:50 blended kerosene. The concentration of PAH compounds in the exhaust emissions vary greatly between fuels. Combustion of FSJF produces the greatest total concentration of PAH compounds while combustion of GTL produces the least. However, when PAHs in the exhaust sample are measured in terms of the regulatory marker compound benzo[a]pyrene, then all of the alternative fuels emit a lower concentration of PAH in comparison to Jet A-1. Emissions from the combustion of Jet A-1/GTL blended kerosene were found to have a disproportionately low concentration of PAHs and appear to inherit a greater proportion of the GTL emission characteristics than would be expected from volume fraction alone. The data imply the presence of a nonlinear relation between fuel blend composition and the emission of PAH compounds. For each of the fuels, the speciation of PAH compounds present in the exhaust emissions were found to be remarkably similar (R(2) = 0.94-0.62), and the results do provide evidence to support the premise that PAH speciation is to some extent indicative of the emission source. In contrast, no correlation was found between the PAH species present in the fuel with those subsequently emitted in the exhaust. The results strongly suggests that local air quality measured in terms of the particulate-bound PAH burden could be significantly improved by the use of GTL kerosene either blended with or in place of Jet A-1 kerosene.
Economic and Non-proliferation Policy Considerations of Uranium Enrichment in Brazil and Argentina
DOE Office of Scientific and Technical Information (OSTI.GOV)
Short, Steven M.; Phillips, Jon R.; Weimar, Mark R.
2008-09-01
The nuclear development programs of both Argentina and Brazil have, since the 1970s, been premised on the desire for self-sufficiency and assurance of nuclear fuel supply. While military rivalry and mutual distrust led to nuclear weapons related development programs in the 1970s and 1980s, both countries have since terminated these programs. Furthermore, the governments of both countries have pledged their commitment to exclusively non-explosive use of nuclear energy and have signed the Non Proliferation Treaty (NPT). Utilizing rights provided for under the NPT, both Argentina and Brazil have nuclear fuel production facilities, with the notable exception of enrichment plants, thatmore » provide much of the current indigenous fuel requirements for their nuclear power plants. However, both countries are actively developing enrichment capability to fill this gap. The purpose of this report is to assess the economic basis and non-proliferation policy considerations for indigenous enrichment capability within the context of their desired self-sufficiency and to evaluate possible United States Government policy options.« less
NREL - Advanced Vehicles and Fuels Basics - Center for Transportation Technologies and Systems 2010
Dan; Arvizu; Barbara; Goodman; Robert; McCormick; Tony; Markel; Matt; Keyser; Sreekant; Narumanchi; Rob; Farrington
2017-12-09
We can improve the fuel economy of our cars, trucks, and buses by designing them to use the energy in fuels more efficiently. Researchers at the National Renewable Energy Laboratory (NREL) are helping the nation achieve these goals by developing transportation technologies like: advanced vehicle systems and components; alternative fuels; as well as fuel cells, hybrid electric, and plug-in hybrid vehicles.
Perspective on One Decade of Laser Propulsion Research at Air Force Research Laboratory
DOE Office of Scientific and Technical Information (OSTI.GOV)
Larson, C. William
The Air Force Laser Propulsion Program spanned nearly 10-years and included about 35-weeks of experimental research with the Pulsed Laser Vulnerability Test System of the High Energy Laser Systems Test Facility at White Sands Missile Range, New Mexico, WSMR/HELSTF/PLVTS. PLVTS is a pulsed CO2 laser that produces up to 10 kW of power in {approx}10 cm{sup 2} spot at wavelength of 10.6 microns. The laser is capable of a pulse repetition rate up to 25 Hz, with pulse durations of about 20 microseconds. During the program basic research was conducted on the production of propulsion thrust from laser energy throughmore » heating of air and ablation of various candidate rocket propellant fuels. Flight tests with an ablation fuel (Delrin) and air were accomplished with a model Laser Lightcraft vehicle that was optimized for propulsion by the PLVTS at its maximum power output, 10 kW at 25 Hz, 400 J/pulse. Altitudes exceeding 200-feet were achieved with ablation fuels. The most recent contributions to the technology included development of a mini-thruster standard for testing of chemically enhanced fuels and theoretical calculations on the performance of formulations containing ammonium nitrate and Delrin. Results of these calculations will also be reported here.« less
Perspective on One Decade of Laser Propulsion Research at Air Force Research Laboratory
NASA Astrophysics Data System (ADS)
Larson, C. William
2008-04-01
The Air Force Laser Propulsion Program spanned nearly 10-years and included about 35-weeks of experimental research with the Pulsed Laser Vulnerability Test System of the High Energy Laser Systems Test Facility at White Sands Missile Range, New Mexico, WSMR/HELSTF/PLVTS. PLVTS is a pulsed CO2 laser that produces up to 10 kW of power in ˜10 cm2 spot at wavelength of 10.6 microns. The laser is capable of a pulse repetition rate up to 25 Hz, with pulse durations of about 20 microseconds. During the program basic research was conducted on the production of propulsion thrust from laser energy through heating of air and ablation of various candidate rocket propellant fuels. Flight tests with an ablation fuel (Delrin) and air were accomplished with a model Laser Lightcraft vehicle that was optimized for propulsion by the PLVTS at its maximum power output, 10 kW at 25 Hz, 400 J/pulse. Altitudes exceeding 200-feet were achieved with ablation fuels. The most recent contributions to the technology included development of a mini-thruster standard for testing of chemically enhanced fuels and theoretical calculations on the performance of formulations containing ammonium nitrate and Delrin. Results of these calculations will also be reported here.
Fuel age and fire spread: Natural conditions versus opportunities for fire suppression
Halsey, Richard W.; Keeley, Jon E.; Wilson, Kit
2009-01-01
Wildfires are driven and restrained by an interplay of variables that can lead to many potential outcomes. As every wildland firefighter learns in basic training, the ability of a fire to spread is determined by three basic variables: fuel type and condition, weather, and topography. Fire suppression obviously plays a significant role in determining fire spread as well, so firefighter activity becomes an additional variable.
Multi-fuel reformers for fuel cells used in transportation. Phase 1: Multi-fuel reformers
NASA Astrophysics Data System (ADS)
1994-05-01
DOE has established the goal, through the Fuel Cells in Transportation Program, of fostering the rapid development and commercialization of fuel cells as economic competitors for the internal combustion engine. Central to this goal is a safe feasible means of supplying hydrogen of the required purity to the vehicular fuel cell system. Two basic strategies are being considered: (1) on-board fuel processing whereby alternative fuels such as methanol, ethanol or natural gas stored on the vehicle undergo reformation and subsequent processing to produce hydrogen, and (2) on-board storage of pure hydrogen provided by stationary fuel processing plants. This report analyzes fuel processor technologies, types of fuel and fuel cell options for on-board reformation. As the Phase 1 of a multi-phased program to develop a prototype multi-fuel reformer system for a fuel cell powered vehicle, the objective of this program was to evaluate the feasibility of a multi-fuel reformer concept and to select a reforming technology for further development in the Phase 2 program, with the ultimate goal of integration with a DOE-designated fuel cell and vehicle configuration. The basic reformer processes examined in this study included catalytic steam reforming (SR), non-catalytic partial oxidation (POX) and catalytic partial oxidation (also known as Autothermal Reforming, or ATR). Fuels under consideration in this study included methanol, ethanol, and natural gas. A systematic evaluation of reforming technologies, fuels, and transportation fuel cell applications was conducted for the purpose of selecting a suitable multi-fuel processor for further development and demonstration in a transportation application.
NASA Technical Reports Server (NTRS)
Corman, J. C.
1976-01-01
A data base for the comparison of advanced energy conversion systems for utility applications using coal or coal-derived fuels was developed. Estimates of power plant performance (efficiency), capital cost, cost of electricity, natural resource requirements, and environmental intrusion characteristics were made for ten advanced conversion systems. Emphasis was on the energy conversion system in the context of a base loaded utility power plant. All power plant concepts were premised on meeting emission standard requirements. A steam power plant (3500 psig, 1000 F) with a conventional coal-burning furnace-boiler was analyzed as a basis for comparison. Combined cycle gas/steam turbine system results indicated competitive efficiency and a lower cost of electricity compared to the reference steam plant. The Open-Cycle MHD system results indicated the potential for significantly higher efficiency than the reference steam plant but with a higher cost of electricity.
Tourism in Austria: biodiversity, environmental sustainability, and growth issues.
Malik, Muhammad Asad Saleem; Shah, Syed Asim; Zaman, Khalid
2016-12-01
This study examined the long-run and causal relationships between international tourism, biodiversity loss, environmental sustainability, and specific growth factors under the premises of sustainable tourism in Austria, by using a consistent time series data from 1975 to 2015. The results reveal that inbound tourism, per capita income, and population density affected the potential habitat area while population density largely affected the food production in a country. Inbound tourism and population density both deteriorate the environmental quality in a form of increasing carbon dioxide (CO 2 ) emissions and fossil fuel energy consumption while per capita income reduces the fossil fuel energy consumption. Food exports increase per capita income, while food imports and population density both decrease economic growth. Inbound tourism and economic growth advance population density while forest area and food exports decrease the population density. The study supports growth-led tourism and growth-led food production in a country.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marschman, S.C.; Cowin, J.P.; Orlando, T.M.
1998-06-01
'This project involves basic research in chemistry and physics aimed at providing information pertinent to the safe long-term dry storage of spent nuclear fuel (SNF), thousands of tons of which remain in water storage across the DOE complex. The Hanford Site K-Basins alone hold 2,300 tons of spent fuel, much of it severely corroded, and similar situations exist at Savannah River and Idaho National Engineering and Environmental Laboratory. The DOE plans to remove this fuel and seal it in overpack canisters for dry interim storage for up to 75 years while awaiting permanent disposition. Chemically-bound water will remain in thismore » fuel even following proposed drying steps, leading to possible long-term corrosion of the containers and/or fuel rods themselves, generation of H{sub 2} and O{sub 2} gas via radiolysis (which could lead to deflagration or detonation), and reactions of pyrophoric uranium hydrides. No thoroughly tested model is currently available to predict fuel behavior during pre-processing, processing, or storage. In a collaboration between Rutgers University, Pacific Northwest National Laboratory, and Brookhaven National Laboratory, the authors are studying the radiolytic reaction, drying processes, and corrosion behavior of actual SNF materials, and of pure and mixed-phase samples. The authors propose to determine what is omitted from current models: radiolysis of water adsorbed on or in hydrates or hydroxides, thermodynamics of interfacial phases, and kinetics of drying. A model will be developed and tested against actual fuel rod behavior to insure validity and applicability to the problems associated with developing dry storage strategies for DOE-owned SNF. This report summarizes work after eight months of a three-year project.'« less
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-14
... (VOC) from Consumer and Commercial Products, Section 3.0--Portable Fuel Containers. This amendment will... Organic Compounds from Consumer and Commercial Products, Section 3.0--Portable Fuel Containers). I... Products, Section 3.0--Portable Fuel Containers is concerned specifically with the use of portable fuel...
Muscle carnitine availability plays a central role in regulating fuel metabolism in the rodent.
Porter, Craig; Constantin-Teodosiu, Dumitru; Constantin, Despina; Leighton, Brendan; Poucher, Simon M; Greenhaff, Paul L
2017-09-01
Meldonium inhibits endogenous carnitine synthesis and tissue uptake, and accelerates urinary carnitine excretion, although the impact of meldonium-mediated muscle carnitine depletion on whole-body fuel selection, and muscle fuel metabolism and its molecular regulation is under-investigated. Ten days of oral meldonium administration did not impact on food or fluid intake, physical activity levels or body weight gain in the rat, whereas it depleted muscle carnitine content (all moieties), increased whole-body carbohydrate oxidation and muscle and liver glycogen utilization, and reduced whole-body fat oxidation. Meldonium reduced carnitine transporter protein expression across muscles of different contractile and metabolic phenotypes. A TaqMan PCR low-density array card approach revealed the abundance of 189 mRNAs regulating fuel selection was altered in soleus muscle by meldonium, highlighting the modulation of discrete cellular functions and metabolic pathways. These novel findings strongly support the premise that muscle carnitine availability is a primary regulator of fuel selection in vivo. The body carnitine pool is primarily confined to skeletal muscle, where it regulates carbohydrate (CHO) and fat usage. Meldonium (3-(2,2,2-trimethylhydrazinium)-propionate) inhibits carnitine synthesis and tissue uptake, although the impact of carnitine depletion on whole-body fuel selection, muscle fuel metabolism and its molecular regulation is under-investigated. Male lean Zucker rats received water (control, n = 8) or meldonium-supplemented water (meldonium, n = 8) for 10 days [1.6 g kg -1 body mass (BM) day -1 days 1-2, 0.8 g kg -1 BM day -1 thereafter]. From days 7-10, animals were housed in indirect calorimetry chambers after which soleus muscle and liver were harvested. Food and fluid intake, weight gain and physical activity levels were similar between groups from days 7 to 10. Compared to control, meldonium depleted muscle total carnitine (P < 0.001) and all carnitine esters. Furthermore, whole-body fat oxidation was less (P < 0.001) and CHO oxidation was greater (P < 0.05) compared to the control, whereas soleus and liver glycogen contents were less (P < 0.01 and P < 0.01, respectively). In a second study, male Wistar rats received water (n = 8) or meldonium-supplemented water (n = 8) as above, and kidney, heart and extensor digitorum longus muscle (EDL) and soleus muscles were collected. Compared to control, meldonium depleted total carnitine content (all P < 0.001), reduced carnitine transporter protein and glycogen content, and increased pyruvate dehydrogenase kinase 4 mRNA abundance in the heart, EDL and soleus. In total, 189 mRNAs regulating fuel selection were differentially expressed in soleus in meldonium vs. control, and a number of cellular functions and pathways strongly associated with carnitine depletion were identified. Collectively, these data firmly support the premise that muscle carnitine availability is a primary regulator of fuel selection in vivo. © 2017 The University of Nottingham. The Journal of Physiology © 2017 The Physiological Society.
Wildland fire emissions, carbon, and climate: Modeling fuel consumption
Roger D. Ottmar
2014-01-01
Fuel consumption specifies the amount of vegetative biomass consumed during wildland fire. It is a two-stage process of pyrolysis and combustion that occurs simultaneously and at different rates depending on the characteristics and condition of the fuel, weather, topography, and in the case of prescribed fire, ignition rate and pattern. Fuel consumption is the basic...
Nanoplasmonic Catalysis for Synthetic Fuel Production
2010-02-22
understanding of the basic mechanism underlying this enhancement with the ultimate goal of producing synthetic fuels, such as hydrogen , methane and...of producing synthetic fuels, such as hydrogen , methane and methanol using visible illumination. Objectives: - Fabricate arrays of metal...in our energy infrastructure. For photocatalysis , this area is especially exciting because it presents a possible route to direct solar-to-fuel
Alternative Fuels Data Center: Hydrogen
this section... Hydrogen Basics Benefits & Considerations Stations Vehicles Laws & Incentives distribution, research and development, and related links. Icon of a scale. Benefits and Considerations Explore the benefits and considerations of using hydrogen as a vehicle fuel. Icon of a fueling pump. Stations
NASA Astrophysics Data System (ADS)
Guan, Yifeng; Zhao, Jie; Shi, Tengfei; Zhu, Peipei
2016-09-01
In recent years, China's increased interest in environmental protection has led to a promotion of energy-efficient dual fuel (diesel/natural gas) ships in Chinese inland rivers. A natural gas as ship fuel may pose dangers of fire and explosion if a gas leak occurs. If explosions or fires occur in the engine rooms of a ship, heavy damage and losses will be incurred. In this paper, a fault tree model is presented that considers both fires and explosions in a dual fuel ship; in this model, dual fuel engine rooms are the top events. All the basic events along with the minimum cut sets are obtained through the analysis. The primary factors that affect accidents involving fires and explosions are determined by calculating the degree of structure importance of the basic events. According to these results, corresponding measures are proposed to ensure and improve the safety and reliability of Chinese inland dual fuel ships.
Nature as a Guide: Using Nature in Counseling, Therapy, and Education.
ERIC Educational Resources Information Center
Nebbe, Linda Lloyd
This book contains practical activities for teachers, counselors, and other helping professionals utilizing elements in nature. The premise for the utilization of nature therapy is that if people develop an awareness and reverence for life, they will also develop self-understanding and self-respect. The first four chapters provide a rationale for…
Varying termiticide application rate and volume affect initial soil penetration
Christopher Peterson
2010-01-01
The initial soil penetration of Premise 75 and Termidor SC, containing imidacloprid and fipronil, respectively, were tested in laboratory columns of five different soils. Three combinations of application concentration and volume were used: double the recommended active ingredient concentration at one half the recommended volume (DR), the full concentration and volume...
MISHAP Newsletter of the Minnesota Social History Project. August, 1978 through March, 1979.
ERIC Educational Resources Information Center
Crozier, William; And Others
This document contains eight newsletters prepared by the Minnesota Social History Project (MSHP), an experimental curriculum project in local social history. The newsletters offer classroom exercises, participant suggestions, and supportive essays designed for teachers working with the MSHP. The premise of the project is that "American history can…
What Will Happen If...Young Children and the Scientific Mind.
ERIC Educational Resources Information Center
Sprung, Barbara; And Others
Based on the premise that exposure to science and technology is important in early childhood curricula, this guide was developed to help teachers incorporate mathematics, sciences, and technology-related activities into existing programs. Activities contained in this guide focus on concepts in the physical sciences and in the development of…
Designing and Teaching Business & Society Courses from a Threshold Concept Approach
ERIC Educational Resources Information Center
Vidal, Natalia; Smith, Renae; Spetic, Wellington
2015-01-01
This article examines the redesign of an undergraduate course in Business & Society using a threshold concept approach. Business & Society courses may be troublesome for students because they depart from the premise that business is limited to creating value for shareholders. We argue that Business & Society courses contain a web of…
Method to improve lubricity of low-sulfur diesel and gasoline fuels
Erdemir, Ali
2004-08-31
A method for providing lubricity in fuels and lubricants includes adding a boron compound to a fuel or lubricant to provide a boron-containing fuel or lubricant. The fuel or lubricant may contain a boron compound at a concentration between about 30 ppm and about 3,000 ppm and a sulfur concentration of less than about 500 ppm. A method of powering an engine to minimize wear, by burning a fuel containing boron compounds. The boron compounds include compound that provide boric acid and/or BO.sub.3 ions or monomers to the fuel or lubricant.
49 CFR 571.304 - Standard No. 304; Compressed natural gas fuel container integrity.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 304; Compressed natural gas fuel... natural gas fuel container integrity. S1. Scope. This standard specifies requirements for the integrity of compressed natural gas (CNG), motor vehicle fuel containers. S2. Purpose. The purpose of this standard is to...
49 CFR 571.304 - Standard No. 304; Compressed natural gas fuel container integrity.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 6 2011-10-01 2011-10-01 false Standard No. 304; Compressed natural gas fuel... natural gas fuel container integrity. S1. Scope. This standard specifies requirements for the integrity of compressed natural gas (CNG), motor vehicle fuel containers. S2. Purpose. The purpose of this standard is to...
ALD coating of nuclear fuel actinides materials
Yacout, A. M.; Pellin, Michael J.; Yun, Di; Billone, Mike
2017-09-05
The invention provides a method of forming a nuclear fuel pellet of a uranium containing fuel alternative to UO.sub.2, with the steps of obtaining a fuel form in a powdered state; coating the fuel form in a powdered state with at least one layer of a material; and sintering the powdered fuel form into a fuel pellet. Also provided is a sintered nuclear fuel pellet of a uranium containing fuel alternative to UO.sub.2, wherein the pellet is made from particles of fuel, wherein the particles of fuel are particles of a uranium containing moiety, and wherein the fuel particles are coated with at least one layer between about 1 nm to about 4 nm thick of a material using atomic layer deposition, and wherein the at least one layer of the material substantially surrounds each interfacial grain barrier after the powdered fuel form has been sintered.
Vulnerability as a key to authenticity.
Daniel, L E
1998-01-01
Vulnerability is explored as a human trait that gives nurses an opportunity to engage in authentic nursing. Vulnerability in both nurse and patient is necessary for the practice of nursing with caring as its basic premise. Philosophic discourse. Vulnerability is explored in terms of its traditional connotation and existential meaning. To be authentic, nurses must be aware of their own vulnerability, recognize themselves in others, and be willing to enter into mutual vulnerability. If nurses deny the opportunity to be vulnerable, they deny the opportunity to participate in humanness and are more likely to dehumanize others.
Reforming of fuel inside fuel cell generator
Grimble, Ralph E.
1988-01-01
Disclosed is an improved method of reforming a gaseous reformable fuel within a solid oxide fuel cell generator, wherein the solid oxide fuel cell generator has a plurality of individual fuel cells in a refractory container, the fuel cells generating a partially spent fuel stream and a partially spent oxidant stream. The partially spent fuel stream is divided into two streams, spent fuel stream I and spent fuel stream II. Spent fuel stream I is burned with the partially spent oxidant stream inside the refractory container to produce an exhaust stream. The exhaust stream is divided into two streams, exhaust stream I and exhaust stream II, and exhaust stream I is vented. Exhaust stream II is mixed with spent fuel stream II to form a recycle stream. The recycle stream is mixed with the gaseous reformable fuel within the refractory container to form a fuel stream which is supplied to the fuel cells. Also disclosed is an improved apparatus which permits the reforming of a reformable gaseous fuel within such a solid oxide fuel cell generator. The apparatus comprises a mixing chamber within the refractory container, means for diverting a portion of the partially spent fuel stream to the mixing chamber, means for diverting a portion of exhaust gas to the mixing chamber where it is mixed with the portion of the partially spent fuel stream to form a recycle stream, means for injecting the reformable gaseous fuel into the recycle stream, and means for circulating the recycle stream back to the fuel cells.
Reforming of fuel inside fuel cell generator
Grimble, R.E.
1988-03-08
Disclosed is an improved method of reforming a gaseous reformable fuel within a solid oxide fuel cell generator, wherein the solid oxide fuel cell generator has a plurality of individual fuel cells in a refractory container, the fuel cells generating a partially spent fuel stream and a partially spent oxidant stream. The partially spent fuel stream is divided into two streams, spent fuel stream 1 and spent fuel stream 2. Spent fuel stream 1 is burned with the partially spent oxidant stream inside the refractory container to produce an exhaust stream. The exhaust stream is divided into two streams, exhaust stream 1 and exhaust stream 2, and exhaust stream 1 is vented. Exhaust stream 2 is mixed with spent fuel stream 2 to form a recycle stream. The recycle stream is mixed with the gaseous reformable fuel within the refractory container to form a fuel stream which is supplied to the fuel cells. Also disclosed is an improved apparatus which permits the reforming of a reformable gaseous fuel within such a solid oxide fuel cell generator. The apparatus comprises a mixing chamber within the refractory container, means for diverting a portion of the partially spent fuel stream to the mixing chamber, means for diverting a portion of exhaust gas to the mixing chamber where it is mixed with the portion of the partially spent fuel stream to form a recycle stream, means for injecting the reformable gaseous fuel into the recycle stream, and means for circulating the recycle stream back to the fuel cells. 1 fig.
40 CFR 86.155-98 - Records required; refueling test.
Code of Federal Regulations, 2012 CFR
2012-07-01
...-integrated systems, fuel system (including fuel tank(s) capacity and location), basic engine description... odometer reading. (g) All pertinent instrument information including nozzle and fuel delivery system description. As an alternative, a reference to a vehicle test cell number may be used, with advance approval...
40 CFR 86.155-98 - Records required; refueling test.
Code of Federal Regulations, 2014 CFR
2014-07-01
...-integrated systems, fuel system (including fuel tank(s) capacity and location), basic engine description... odometer reading. (g) All pertinent instrument information including nozzle and fuel delivery system description. As an alternative, a reference to a vehicle test cell number may be used, with advance approval...
40 CFR 86.155-98 - Records required; refueling test.
Code of Federal Regulations, 2013 CFR
2013-07-01
...-integrated systems, fuel system (including fuel tank(s) capacity and location), basic engine description... odometer reading. (g) All pertinent instrument information including nozzle and fuel delivery system description. As an alternative, a reference to a vehicle test cell number may be used, with advance approval...
40 CFR 86.155-98 - Records required; refueling test.
Code of Federal Regulations, 2010 CFR
2010-07-01
...-integrated systems, fuel system (including fuel tank(s) capacity and location), basic engine description... odometer reading. (g) All pertinent instrument information including nozzle and fuel delivery system description. As an alternative, a reference to a vehicle test cell number may be used, with advance approval...
40 CFR 86.155-98 - Records required; refueling test.
Code of Federal Regulations, 2011 CFR
2011-07-01
...-integrated systems, fuel system (including fuel tank(s) capacity and location), basic engine description... odometer reading. (g) All pertinent instrument information including nozzle and fuel delivery system description. As an alternative, a reference to a vehicle test cell number may be used, with advance approval...
Supply Ventilation and Prevention of Carbon Monoxide (II) Ingress into Building Premises
NASA Astrophysics Data System (ADS)
Litvinova, N. A.
2017-11-01
The article contains the relationships of carbon monoxide (II) concentration versus height-above-ground near buildings derived based on results of studies. The results of studies are crucial in preventing external pollutants ingress into a ventilation system. Being generated by external emission sources, such as motor vehicles and city heating plants, carbon monoxide (II) enters the premises during operation of a supply ventilation system. Fresh air nomographic charts were drawn to select the height of a fresh air intake into the ventilation system. Nomographic charts take into account external sources. The selected emission sources are located at various levels above ground relative to the building. The recommendations allow designing supply ventilation taking into account the quality of ambient air through the whole building height.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Storey, Robson, F.; Mauritz, Kenneth, A.; Patton, Derek, L.
The overall objective of this project was the development and evaluation of novel hydrocarbon fuel cell (FC) membranes that possess high temperature performance and long term chemical/mechanical durability in proton exchange membrane (PEM) fuel cells (FC). The major research theme was synthesis of aromatic hydrocarbon polymers of the poly(arylene ether sulfone) (PAES) type containing sulfonic acid groups tethered to the backbone via perfluorinated alkylene linkages and in some cases also directly attached to the phenylene groups along the backbone. Other research themes were the use of nitrogen-based heterocyclics instead of acid groups for proton conduction, which provides high temperature, lowmore » relative humidity membranes with high mechanical/thermal/chemical stability and pendant moieties that exhibit high proton conductivities in the absence of water, and synthesis of block copolymers consisting of a proton conducting block coupled to poly(perfluorinated propylene oxide) (PFPO) blocks. Accomplishments of the project were as follows: 1) establishment of a vertically integrated program of synthesis, characterization, and evaluation of FC membranes, 2) establishment of benchmark membrane performance data based on Nafion for comparison to experimental membrane performance, 3) development of a new perfluoroalkyl sulfonate monomer, N,N-diisopropylethylammonium 2,2-bis(p-hydroxyphenyl) pentafluoropropanesulfonate (HPPS), 4) synthesis of random and block copolymer membranes from HPPS, 5) synthesis of block copolymer membranes containing high-acid-concentration hydrophilic blocks consisting of HPPS and 3,3'-disulfonate-4,4'-dichlorodiphenylsulfone (sDCDPS), 6) development of synthetic routes to aromatic polymer backbones containing pendent 1H-1,2,3-triazole moieties, 7) development of coupling strategies to create phase-separated block copolymers between hydrophilic sulfonated prepolymers and commodity polymers such as PFPO, 8) establishment of basic performance properties of experimental membranes, 9) fabrication and FC performance testing of membrane electrode assemblies (MEA) from experimental membranes, and 10) measurement of ex situ and in situ membrane durability of experimental membranes. Although none of the experimental hydrocarbon membranes that issued from the project displayed proton conductivities that met DOE requirements, the project contributed to our basic understanding of membrane structure-property relationships in a number of key respects. An important finding of the benchmark studies is that physical degradation associated with humidity and temperature variations in the FC tend to open new fuel crossover pathways and act synergistically with chemical degradation to accelerate overall membrane degradation. Thus, for long term membrane survival and efficient fuel utilization, membranes must withstand internal stresses due to humidity and temperature changes. In this respect, rigid aromatic hydrocarbon fuel cell membranes, e.g. PAES, offer an advantage over un-modified Nafion membranes. The benchmark studies also showed that broadband dielectric spectroscopy is a potentially powerful tool in assessing shifts in the fundamental macromolecular dynamics caused by Nafion chemical degradation, and thus, this technique is of relevance in interrogating proton exchange membrane durability in fuel cells and macromolecular dynamics as coupled to proton migration, which is of fundamental relevance in proton exchange membranes in fuel cells. A key finding from the hydrocarbon membrane synthesis effort was that rigid aromatic polymers containing isolated ion exchange groups tethered tightly to the backbone (short tether), such as HPPS, provide excellent mechanical and durability properties but do not provide sufficient conductivity, in either random or block configuration, when used as the sole ion exchange monomer. However, we continue to hypothesize that longer tethers, and tethered groups spaced more closely within the hydrophilic chain elements of the polymer, will yield highly conductive materials with excellent mechanical properties. Another key finding is the superior performance of PAES membranes upon being subjected to open circuit voltage (OCV) testing. Throughout the course of the experiment, OCV for the PAES not only stayed higher but also decayed at a much lower rate, which is attributed to better dimensional stability and improved mechanical and gas barrier properties. The rigid backbone reinforcement of PAES adds gas diffusion tortuosity that restricts membrane degradation and OCV loss due to reduced fuel crossover. The overall results of creep, contractile stress and mechanical tensile tests confirm the conclusion that degraded MEAs of PAES membrane can handle stress and are more likely to be more durable in a fuel cell, even after subjected to 62h of OCV degradation.« less
46 CFR 119.470 - Ventilation of spaces containing diesel fuel tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Ventilation of spaces containing diesel fuel tanks. 119... MACHINERY INSTALLATION Specific Machinery Requirements § 119.470 Ventilation of spaces containing diesel... containing a diesel fuel tank and no machinery must meet one of the following requirements: (1) A space of 14...
46 CFR 119.470 - Ventilation of spaces containing diesel fuel tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel fuel tanks. 119... MACHINERY INSTALLATION Specific Machinery Requirements § 119.470 Ventilation of spaces containing diesel... containing a diesel fuel tank and no machinery must meet one of the following requirements: (1) A space of 14...
49 CFR 393.68 - Compressed natural gas fuel containers.
Code of Federal Regulations, 2013 CFR
2013-10-01
... containers. (a) Applicability. The rules in this section apply to compressed natural gas (CNG) fuel... auxiliary equipment installed on, or used in connection with commercial motor vehicles. (b) CNG containers... equipped with a CNG fuel tank must meet the CNG container requirements of FMVSS No. 304 (49 CFR 571.304) in...
49 CFR 393.68 - Compressed natural gas fuel containers.
Code of Federal Regulations, 2012 CFR
2012-10-01
... containers. (a) Applicability. The rules in this section apply to compressed natural gas (CNG) fuel... auxiliary equipment installed on, or used in connection with commercial motor vehicles. (b) CNG containers... equipped with a CNG fuel tank must meet the CNG container requirements of FMVSS No. 304 (49 CFR 571.304) in...
49 CFR 393.68 - Compressed natural gas fuel containers.
Code of Federal Regulations, 2014 CFR
2014-10-01
... containers. (a) Applicability. The rules in this section apply to compressed natural gas (CNG) fuel... auxiliary equipment installed on, or used in connection with commercial motor vehicles. (b) CNG containers... equipped with a CNG fuel tank must meet the CNG container requirements of FMVSS No. 304 (49 CFR 571.304) in...
NASA Astrophysics Data System (ADS)
Karyakin, Yu. E.; Nekhozhin, M. A.; Pletnev, A. A.
2013-07-01
A method for calculating the quantity of moisture in a metal-concrete container in the process of its charging with spent nuclear fuel is proposed. A computing method and results obtained by it for conservative estimation of the time of vacuum drying of a container charged with spent nuclear fuel by technologies with quantization and without quantization of the lower fuel element cluster are presented. It has been shown that the absence of quantization in loading spent fuel increases several times the time of vacuum drying of the metal-concrete container.
A 1993 Ford Taurus and a 1995 Chevrolet Achieva were tested using three different fuels: (1) a winter grade (E-10) fuel containing 10% (vol.) 200 proof ethanol, (2) a winter grade (WG) fuel without any oxygen containing compounds, and (3) a summer grade (SG) fuel without oxygen...
Environmental aspects of fossil fuels combustion in Poland
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sekula, R.
Combustion of fossil fuels is the main source of energy in Poland. Coal will probably remain the basic fuel for energy generation for many years. The principal problems connected with fuel utilization in Poland are presented in this study. The major pollutants and ways to reduce air pollution are also described. Data are based on the report of the Polish Academy of Sciences.
Vanderstraeten, Jacques; Burda, Hynek; Verschaeve, Luc; De Brouwer, Christophe
2015-07-01
It has been suggested that weak 50/60 Hz [extremely low frequency (ELF)] magnetic fields (MF) could affect circadian biorhythms by disrupting the clock function of cryptochromes (the "cryptochrome hypothesis," currently under study). That hypothesis is based on the premise that weak (Earth strength) static magnetic fields affect the redox balance of cryptochromes, thus possibly their signaling state as well. An appropriate method for testing this postulate could be real time or short-term study of the circadian clock function of retinal cryptochromes under exposure to the static field intensities that elicit the largest redox changes (maximal "low field" and "high field" effects, respectively) compared to zero field. Positive results might encourage further study of the cryptochrome hypothesis itself. However, they would indicate the need for performing a similar study, this time comparing the effects of only slight intensity changes (low field range) in order to explore the possible role of the proximity of metal structures and furniture as a confounder under the cryptochrome hypothesis.
40 CFR Appendix P to Part 51 - Minimum Emission Monitoring Requirements
Code of Federal Regulations, 2012 CFR
2012-07-01
... respective monitoring requirements are listed below. 1.1.1 Fossil fuel-fired steam generators, as specified... this appendix to meet the following basic requirements. 2.1 Fossil fuel-fired steam generators. Each fossil fuel-fired steam generator, except as provided in the following subparagraphs, with an annual...
40 CFR Appendix P to Part 51 - Minimum Emission Monitoring Requirements
Code of Federal Regulations, 2014 CFR
2014-07-01
... respective monitoring requirements are listed below. 1.1.1 Fossil fuel-fired steam generators, as specified... this appendix to meet the following basic requirements. 2.1 Fossil fuel-fired steam generators. Each fossil fuel-fired steam generator, except as provided in the following subparagraphs, with an annual...
40 CFR Appendix P to Part 51 - Minimum Emission Monitoring Requirements
Code of Federal Regulations, 2013 CFR
2013-07-01
... respective monitoring requirements are listed below. 1.1.1 Fossil fuel-fired steam generators, as specified... this appendix to meet the following basic requirements. 2.1 Fossil fuel-fired steam generators. Each fossil fuel-fired steam generator, except as provided in the following subparagraphs, with an annual...
40 CFR Appendix P to Part 51 - Minimum Emission Monitoring Requirements
Code of Federal Regulations, 2010 CFR
2010-07-01
... respective monitoring requirements are listed below. 1.1.1 Fossil fuel-fired steam generators, as specified... this appendix to meet the following basic requirements. 2.1 Fossil fuel-fired steam generators. Each fossil fuel-fired steam generator, except as provided in the following subparagraphs, with an annual...
40 CFR Appendix P to Part 51 - Minimum Emission Monitoring Requirements
Code of Federal Regulations, 2011 CFR
2011-07-01
... respective monitoring requirements are listed below. 1.1.1 Fossil fuel-fired steam generators, as specified... this appendix to meet the following basic requirements. 2.1 Fossil fuel-fired steam generators. Each fossil fuel-fired steam generator, except as provided in the following subparagraphs, with an annual...
greenhouse effect. Hydrogen has very high energy for its weight, but very low energy for its volume, so new make a hydrogen economy a reality include: Fuel Cells - Improving fuel cell technology and materials needed for fuel cells. Production - Developing technology to efficiently and cost-effectively make
40 CFR 86.157-98 - Refueling test procedures for liquefied petroleum gas-fueled vehicles.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., evaporative/refueling emission family, fuel tank(s) capacity, basic fuel system description and odometer.... As an alternative, a reference to a vehicle test cell number may be used, with advance approval of the Administrator, provided test cell calibration records show the pertinent instrument information...
Basic Information about Mercury
... Since mercury occurs naturally in coal and other fossil fuels, when people burn these fuels for energy, ... coal-fired boilers in many industries to generate forms of thermal heat like steam The burning of ...
Alternative Fuels Data Center: Ethanol
... Ethanol Basics Benefits & Considerations Stations Vehicles Laws & Incentives Ethanol Fuel Prices of a scale. Benefits and Considerations Explore the benefits and considerations of using ethanol as a
Investigation into the Implications of Fuel Cell Shipboard Integration into the T-AGOS 19 Class
2012-02-01
with each defined by its fundamental electrolyte: i. Alkali Fuel Cells (AFC) ii. Polymer Exchange Membrane ( PEM ) iii. Phosphoric Acid Fuel Cells ...of the PEM family (High Temperature – HTPEM and Direct Methanol Fuel Cells – DMFC) were assessed against a range of basic ship requirements...of Stationary PEM Fuel Cell Systems”, DOE hydrogen program 2010 annual report. [11] US Energy Information Administration, “EIA - Weekly Retail
NASA Astrophysics Data System (ADS)
Knížek, Antonín; Dryahina, Ksenyia; Španěl, Patrik; Kubelík, Petr; Kavan, Ladislav; Zukalová, Markéta; Ferus, Martin; Civiš, Svatopluk
2018-06-01
The era of fossil fuels is slowly nearing its inevitable end and the urgency of alternative energy sources basic research, exploration and testing becomes ever more important. Storage and alternative production of energy from fuels, such as methane, represents one of the many alternative approaches. Natural gas containing methane represents a powerful source of energy producing large volume of greenhouse gases. However, methane can be also produced in closed, CO2-neutral cycles. In our study, we compare detailed chemical composition of CH4 fuel produced in two different processes: Classical production of biogas in a rendering station, industrial wastewater treatment station and landfill gas station together with novel approach of artificial photosynthesis from CO2 over acidic anatase TiO2 in experimental apparatus developed in our laboratory. The analysis of CH4 fuel produced in these processes is important. Trace gaseous traces can be for example corrosive or toxic, low quality of the mixture suppresses effectivity of energy production, etc. In this analysis, we present a combination of two methods: High resolution Fourier transform infrared spectroscopy (HR-FTIR) suitable for the main component analysis; and the complementary extremely sensitive method of Selected Ion Flow Tube Mass Spectrometry (SIFT-MS) and gas chromatography (GC-MS), which are in turn best suited for trace analysis. The combination of these methods provides more information than any single of them would be able to and promises a new possible analytical approach to fuel and gaseous mixture analysis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1992-12-01
The bibliography contains citations of selected patents concerning fuel control devices and methods for use in internal combustion engines. Patents describe air-fuel ratio control, fuel injection systems, evaporative fuel control, and surge-corrected fuel control. Citations also discuss electronic and feedback control, methods for engine protection, and fuel conservation. (Contains a minimum of 232 citations and includes a subject term index and title list.)
Turbojet-engine Starting and Acceleration
NASA Technical Reports Server (NTRS)
Mc Cafferty, R. J.; Straight, D. M.
1956-01-01
From considerations of safety and reliability in performance of gas-turbine aircraft, it is clear that engine starting and acceleration are of utmost importance. For this reason extensive efforts have been devoted to the investigation of the factors involved in the starting and acceleration of engines. In chapter III it is shown that certain basic combustion requirements must be met before ignition can occur; consequently, the design and operation of an engine must be tailored to provide these basic requirements in the combustion zone of the engine, particularly in the vicinity of the ignition source. It is pointed out in chapter III that ignition by electrical discharges is aided by high pressure, high temperature, low gas velocity and turbulence, gaseous fuel-air mixture, proper mixture strength, and-an optimum spark. duration. The simultaneous achievement of all these requirements in an actual turbojet-engine combustor is obviously impossible, yet any attempt to satisfy as many requirements as possible will result in lower ignition energies, lower-weight ignition systems, and greater reliability. These factors together with size and cost considerations determine the acceptability of the final ignition system. It is further shown in chapter III that the problem of wall quenching affects engine starting. For example, the dimensions of the volume to be burned must be larger than the quenching distance at the lowest pressure and the most adverse fuel-air ratio encountered. This fact affects the design of cross-fire tubes between adjacent combustion chambers in a tubular-combustor turbojet engine. Only two chambers in these engines contain spark plugs; therefore, the flame must propagate through small connecting tubes between the chambers. The quenching studies indicate that if the cross-fire tubes are too narrow the flame will not propagate from one chamber to another. In order to better understand the role of the basic factors in actual engine operation, many investigations have been conducted in single combustors from gas-turbine engines and in full-scale engines in altitude tanks and in flight. The purpose of the present chapter is to discuss the results of such studies and, where possible, to interpret these results qualitatively in terms of the basic requirements reported in chapter III. The discussion parallels the three phases of turbojet engine starting: (1) Ignition of the fuel-air mixture (2) Propagation of flame throughout the combustion zone (3) Acceleration of the engine to operating speed.
Ether oxygenate additives in gasoline reduce toxicity of exhausts.
Westphal, G A; Krahl, J; Brüning, T; Hallier, E; Bünger, J
2010-02-09
Fuel additives can improve combustion and knock resistance of gasoline engines. Common additives in commercial fuels are "short-chain, oxygen containing hydrocarbons" such as methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE). Since these additives change the combustion characteristics, this may as well influence toxic effects of the resulting emissions. Therefore we compared toxicity and BTEX emissions of gasoline engine exhaust regarding addition of MTBE or ETBE. Non-reformulated gasoline served as basic fuel. This fuel was supplemented with 10%, 20%, 25% and 30% ETBE or 15% MTBE. The fuels were combusted in a gasoline engine at idling, part load and rated power. Condensates and particulate matter (PM) were collected and PM samples extracted with dichloromethane. Cytotoxic effects were investigated in murine fibroblasts (L929) using the neutral red uptake assay and mutagenicity using the bacterial reverse mutation assay. BTEX emissions were analyzed by gas chromatography. PM-extracts showed mutagenicity with and without metabolic activation. Mutagenicity was reduced by the addition of MTBE and ETBE, 10% ETBE being most effective. The condensates produced no significant mutagenic response. The cytotoxicity of the condensates from ETBE- and MTBE-reformulated fuels was reduced as well. The BTEX content in the exhaust was lowered by the addition of MTBE and ETBE. This effect was significantly related to the ETBE content at rated power and part load. Addition of MTBE and ETBE to fuels can improve combustion and leads to decreased toxicity and BTEX content of the exhaust. Reduction of mutagenicity in the PM-extracts is most probably caused by a lower content of polycyclic aromatic hydrocarbons. (c) 2009 Elsevier Ireland Ltd. All rights reserved.
36 CFR 702.2 - Conduct on Library premises.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Conduct on Library premises. 702.2 Section 702.2 Parks, Forests, and Public Property LIBRARY OF CONGRESS CONDUCT ON LIBRARY PREMISES § 702.2 Conduct on Library premises. (a) All persons using the premises shall conduct themselves...
36 CFR 702.2 - Conduct on Library premises.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Conduct on Library premises. 702.2 Section 702.2 Parks, Forests, and Public Property LIBRARY OF CONGRESS CONDUCT ON LIBRARY PREMISES § 702.2 Conduct on Library premises. (a) All persons using the premises shall conduct themselves...
36 CFR 702.2 - Conduct on Library premises.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Conduct on Library premises. 702.2 Section 702.2 Parks, Forests, and Public Property LIBRARY OF CONGRESS CONDUCT ON LIBRARY PREMISES § 702.2 Conduct on Library premises. (a) All persons using the premises shall conduct themselves...
Little, C L; Lock, D; Barnes, J; Mitchell, R T
2003-09-01
A meta-analysis of eight UK food studies was carried out to determine the microbiological quality of food and its relationship with the presence in food businesses of hazard analysis systems and food hygiene training. Of the 19,022 premises visited to collect food samples in these studies between 1997 and 2002, two thirds (66%) were catering premises and one third (34%) were retail premises. Comparison with PHLS Microbiological Guidelines revealed that significantly more ready-to-eat food samples from catering premises (20%; 2,511/12,703) were of unsatisfactory or unacceptable microbiological quality compared to samples from retail premises (12%; 1,039/8,462) (p < 0.00001). Three quarters (76%) of retail premises had hazard analysis systems in place compared with 59% of catering premises (p < 0.00001). In 87% of retail premises the manager had received some form of food hygiene training compared with 80% of catering premises (p < 0.00001). From premises where the manager had received no food hygiene training a greater proportion of samples were of unsatisfactory and unacceptable microbiological quality (20% retail, 27% catering) compared with premises where the manager had received food hygiene training (11% retail, 19% catering) (p < 0.00001). Where the manager of the premises had received food hygiene training, documented hazard analysis systems were more likely to be in place (p < 0.00001). Higher proportions of samples of unsatisfactory and unacceptable microbiological quality (17% retail, 22% catering) were from premises where there was no hazard analysis system in place compared to premises that had a documented hazard analysis system in place (10% retail, 18% catering) (p < 0.00001). Our meta-analysis suggests that the lower microbiological quality of ready-to-eat foods from catering premises compared with those collected from retail premises may reflect differences in management food hygiene training and the presence of a hazard analysis system. The importance of adequate training for food handlers and their managers as a pre-requisite for effective hazard analysis and critical control point (HACCP) based controls is therefore emphasised.
Heated transportable fuel cell cartridges
Lance, Joseph R.; Spurrier, Francis R.
1985-01-01
A fuel cell stack protective system is made where a plurality of fuel cells, each containing liquid electrolyte subject to crystallization, is enclosed by a containing vessel, and where at least one electric heater is placed in the containing vessel and is capable of preventing electrolyte crystallization.
Gentry, J.R.
1958-09-16
A device is described for handling fuel elements of a neutronic reactor. The device consists of two concentric telescoped contalners that may fit about the fuel element. A number of ratchet members, equally spaced about the entrance to the containers, are pivoted on the inner container and spring biased to the outer container so thnt they are forced to hear against and hold the fuel element, the weight of which tends to force the ratchets tighter against the fuel element. The ratchets are released from their hold by raising the inner container relative to the outer memeber. This device reduces the radiation hazard to the personnel handling the fuel elements.
49 CFR 172.336 - Identification numbers; special provisions.
Code of Federal Regulations, 2013 CFR
2013-10-01
... accordance with § 172.542(c). (3) On cargo tanks They contain only fuel oil The cargo tank is marked “Fuel... petroleum distillate fuel The identification number for the liquid petroleum distillate fuel having the lowest flash point is displayed. If the cargo tank also contains gasoline and alcohol fuel blends...
Fuel cell electrolyte membrane with basic polymer
Larson, James M.; Pham, Phat T.; Frey, Matthew H.; Hamrock, Steven J.; Haugen, Gregory M.; Lamanna, William M.
2012-12-04
The present invention is an electrolyte membrane comprising an acid and a basic polymer, where the acid is a low-volatile acid that is fluorinated and is either oligomeric or non-polymeric, and where the basic polymer is protonated by the acid and is stable to hydrolysis.
Fuel cell electrolyte membrane with basic polymer
Larson, James M.; Pham, Phat T.; Frey, Matthew H.; Hamrock, Steven J.; Haugen, Gregory M.; Lamanna, William M.
2010-11-23
The present invention is an electrolyte membrane comprising an acid and a basic polymer, where the acid is a low-volatile acid that is fluorinated and is either oligomeric or non-polymeric, and where the basic polymer is protonated by the acid and is stable to hydrolysis.
ERIC Educational Resources Information Center
Joseph, John E.
1996-01-01
Discusses Victor Henry's innovative presentation of some underlying contradictions in the premises on which linguistics is founded, cast in the Kantian form of antinomies. The review argues that no science remains more strongly contested than linguistics, a science whose origins are paradoxical and that contains outdated concepts. (30 references)…
Citizenship for the 21st Century. Our Democracy: How America Works Series.
ERIC Educational Resources Information Center
Callahan, William T., Jr., Ed.; Banaszak, Ronald A., Ed.
As part of the formulation of a new multidisciplinary civics curriculum for students in grades 8 and 9, a major national conference on the future of civic education was conceived, on the premise that early adolescence is an especially appropriate time to introduce the fundamental ideas of a democratic society. This volume contains the…
Sonnets, High Tech, Haiku: Teaching Poetry in the CAI Classroom.
ERIC Educational Resources Information Center
Krebs, Cynthia; Nichols, Chloe
This report emphasizes the techniques required today for effective slide construction and contains suggestions about the nuts and bolts of slide preparation. Two instructors developed a presentation at Utah Valley State College to enhance their teaching of the sonnet and the Japanese haiku. Their premise: since poetry is a highly visual art form,…
Stationary Liquid Fuel Fast Reactor
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yang, Won Sik; Grandy, Andrew; Boroski, Andrew
For effective burning of hazardous transuranic (TRU) elements of used nuclear fuel, a transformational advanced reactor concept named SLFFR (Stationary Liquid Fuel Fast Reactor) was proposed based on stationary molten metallic fuel. The fuel enters the reactor vessel in a solid form, and then it is heated to molten temperature in a small melting heater. The fuel is contained within a closed, thick container with penetrating coolant channels, and thus it is not mixed with coolant nor flow through the primary heat transfer circuit. The makeup fuel is semi- continuously added to the system, and thus a very small excessmore » reactivity is required. Gaseous fission products are also removed continuously, and a fraction of the fuel is periodically drawn off from the fuel container to a processing facility where non-gaseous mixed fission products and other impurities are removed and then the cleaned fuel is recycled into the fuel container. A reference core design and a preliminary plant system design of a 1000 MWt TRU- burning SLFFR concept were developed using TRU-Ce-Co fuel, Ta-10W fuel container, and sodium coolant. Conservative design approaches were adopted to stay within the current material performance database. Detailed neutronics and thermal-fluidic analyses were performed to develop a reference core design. Region-dependent 33-group cross sections were generated based on the ENDF/B-VII.0 data using the MC2-3 code. Core and fuel cycle analyses were performed in theta-r-z geometries using the DIF3D and REBUS-3 codes. Reactivity coefficients and kinetics parameters were calculated using the VARI3D perturbation theory code. Thermo-fluidic analyses were performed using the ANSYS FLUENT computational fluid dynamics (CFD) code. Figure 0.1 shows a schematic radial layout of the reference 1000 MWt SLFFR core, and Table 0.1 summarizes the main design parameters of SLFFR-1000 loop plant. The fuel container is a 2.5 cm thick cylinder with an inner radius of 87.5 cm. The fuel container is penetrated by twelve hexagonal control assembly (CA) guide tubes, each of which has 3.0 mm thickness and 69.4 mm flat-to-flat outer distance. The distance between two neighboring CA guide tube is selected to be 26 cm to provide an adequate space for CA driving systems. The fuel container has 18181 penetrating coolant tubes of 6.0 mm inner diameter and 2.0 mm thickness. The coolant tubes are arranged in a triangular lattice with a lattice pitch of 1.21 cm. The fuel, structure, and coolant volume fractions inside the fuel container are 0.386, 0.383, and 0.231, respectively. Separate steel reflectors and B4C shields are used outside of the fuel container. Six gas expansion modules (GEMs) of 5.0 cm thickness are introduced in the radial reflector region. Between the radial reflector and the fuel container is a 2.5 cm sodium gap. The TRU inventory at the beginning of equilibrium cycle (BOEC) is 5081 kg, whereas the TRU inventory at the beginning of life (BOL) was 3541 kg. This is because the equilibrium cycle fuel contains a significantly smaller fissile fraction than the LWR TRU feed. The fuel inventory at BOEC is composed of 34.0 a/o TRU, 41.4 a/o Ce, 23.6 a/o Co, and 1.03 a/o solid fission products. Since uranium-free fuel is used, a theoretical maximum TRU consumption rate of 1.011 kg/day is achieved. The semi-continuous fuel cycle based on the 300-batch, 1- day cycle approximation yields a burnup reactivity loss of 26 pcm/day, and requires a daily reprocessing of 32.5 kg of SLFFR fuel. This yields a daily TRU charge rate of 17.45 kg, including a makeup TRU feed of 1.011 kg recovered from the LWR used fuel. The charged TRU-Ce-Co fuel is composed of 34.4 a/o TRU, 40.6 a/o Ce, and 25.0 a/o Co.« less
Rocca, Elena; Andersen, Fredrik
2017-08-14
Scientific risk evaluations are constructed by specific evidence, value judgements and biological background assumptions. The latter are the framework-setting suppositions we apply in order to understand some new phenomenon. That background assumptions co-determine choice of methodology, data interpretation, and choice of relevant evidence is an uncontroversial claim in modern basic science. Furthermore, it is commonly accepted that, unless explicated, disagreements in background assumptions can lead to misunderstanding as well as miscommunication. Here, we extend the discussion on background assumptions from basic science to the debate over genetically modified (GM) plants risk assessment. In this realm, while the different political, social and economic values are often mentioned, the identity and role of background assumptions at play are rarely examined. We use an example from the debate over risk assessment of stacked genetically modified plants (GM stacks), obtained by applying conventional breeding techniques to GM plants. There are two main regulatory practices of GM stacks: (i) regulate as conventional hybrids and (ii) regulate as new GM plants. We analyzed eight papers representative of these positions and found that, in all cases, additional premises are needed to reach the stated conclusions. We suggest that these premises play the role of biological background assumptions and argue that the most effective way toward a unified framework for risk analysis and regulation of GM stacks is by explicating and examining the biological background assumptions of each position. Once explicated, it is possible to either evaluate which background assumptions best reflect contemporary biological knowledge, or to apply Douglas' 'inductive risk' argument.
Williams, C R; Johnson, P H; Ball, T S; Ritchie, S A
2013-09-01
New mosquito control strategies centred on the modifying of populations require knowledge of existing population densities at release sites and an understanding of breeding site ecology. Using a quantitative pupal survey method, we investigated production of the dengue vector Aedes aegypti (L.) (Stegomyia aegypti) (Diptera: Culicidae) in Cairns, Queensland, Australia, and found that garden accoutrements represented the most common container type. Deliberately placed 'sentinel' containers were set at seven houses and sampled for pupae over 10 weeks during the wet season. Pupal production was approximately constant; tyres and buckets represented the most productive container types. Sentinel tyres produced the largest female mosquitoes, but were relatively rare in the field survey. We then used field-collected data to make estimates of per premises population density using three different approaches. Estimates of female Ae. aegypti abundance per premises made using the container-inhabiting mosquito simulation (CIMSiM) model [95% confidence interval (CI) 18.5-29.1 females] concorded reasonably well with estimates obtained using a standing crop calculation based on pupal collections (95% CI 8.8-22.5) and using BG-Sentinel traps and a sampling rate correction factor (95% CI 6.2-35.2). By first describing local Ae. aegypti productivity, we were able to compare three separate population density estimates which provided similar results. We anticipate that this will provide researchers and health officials with several tools with which to make estimates of population densities. © 2012 The Royal Entomological Society.
46 CFR 169.627 - Compartments containing diesel fuel tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Compartments containing diesel fuel tanks. 169.627 Section 169.627 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.627 Compartments containing diesel fuel tanks...
46 CFR 169.627 - Compartments containing diesel fuel tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing diesel fuel tanks. 169.627 Section 169.627 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.627 Compartments containing diesel fuel tanks...
Investigation into the Implications of Fuel Cell Shipboard Integration into the T-AGOS 19 Class
2012-02-01
with each defined by its fundamental electrolyte: i. Alkali Fuel Cells (AFC) ii. Polymer Exchange Membrane ( PEM ) iii. Phosphoric Acid Fuel Cells ...of the PEM family (High Temperature – HTPEM and Direct Methanol Fuel Cells – DMFC) were assessed against a range of basic ship requirements...of fuel cell stacks in 100+kW power range for realistic marine applications, two technologies can be quickly discounted, namely – AFC, DMFC. PEM
Preliminary Feasibility Testing of the BRIC Brine Water Recovery Concept
NASA Technical Reports Server (NTRS)
Callahan, Michael R.; Pensinger, Stuart J.; Pickering, Karen D.
2012-01-01
The Brine Residual In-Containment (BRIC) concept is being developed as a new technology to recover water from spacecraft wastewater brines. Such capability is considered critical to closing the water loop and achieving a sustained human presence in space. The intention of the BRIC concept is to increase the robustness and efficiency of the dewatering process by performing drying inside the container used for the final disposal of the residual brine solid. Recent efforts in the development of BRIC have focused on preliminary feasibility testing using a laboratory- assembled pre-prototype unit. Observations of the drying behavior of actual brine solutions processed under BRIC-like conditions has been of particular interest. To date, experiments conducted with three types of analogue spacecraft wastewater brines have confirmed the basic premise behind the proposed application of in-place drying. Specifically, the dried residual mass from these solutions have tended to exhibit characteristics of adhesion and flow that are expected to continue to challenge process stream management designs typically used in spacecraft systems. Yet, these same characteristics may favor the development of capillary- and surface-tension-based approaches currently envisioned as part of an ultimate microgravity-compatible BRIC design. In addition, preliminary feasibility testing of the BRIC pre-prototype confirmed that high rates of water recovery, up to 98% of the available brine water, may be possible while still removing the majority of the brine contaminants from the influent brine stream. These and other early observations from testing are reported.
Preliminary Feasibility Testing of the BRIC Brine Water Recovery Concept
NASA Technical Reports Server (NTRS)
Callahan, Michael R.; Pensinger, Stuart; Pickering, Karen D.
2011-01-01
The Brine Residual In-Containment (BRIC) concept was developed as a new technology to recover water from spacecraft wastewater brines. Such capability is considered critical to closing the water loop and achieving a sustained human presence in space. The intention of the BRIC concept is to increase the robustness and efficiency of the dewatering process by performing drying inside the container used for the final disposal of the residual brine solid. Recent efforts in the development of BRIC have focused on preliminary feasibility testing using a laboratory- assembled pre-prototype unit. Observations of the drying behavior of actual brine solutions processed under BRIC-like conditions has been of particular interest. To date, experiments conducted with three types of analogue spacecraft wastewater brines have confirmed the basic premise behind the proposed application of in-place drying for these solutions. Specifically, the dried residual mass from these solutions have tended to exhibit characteristics of adhesion and flow that are expected to continue to challenge process stream management in spacecraft brine dewatering system designs. Yet, these same characteristics may favor the development of capillary- and surface-tension-based approaches envisioned as part of an ultimate microgravity-compatible BRIC design. In addition, preliminary feasibility testing of the BRIC pre-prototype confirmed that high rates of water recovery, up to 98% of the available brine water, may be possible while still removing the majority of the brine contaminants from the influent brine stream. These and other observations from testing are reported.
40 CFR 1042.840 - Application requirements for remanufactured engines.
Code of Federal Regulations, 2011 CFR
2011-07-01
... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...
40 CFR 1037.205 - What must I include in my application?
Code of Federal Regulations, 2012 CFR
2012-07-01
... the application (including the test procedures, test parameters, and test fuels) to show you meet the... basic parameters of the vehicle's design and emission controls. List the fuel type on which your vehicles are designed to operate (for example, ultra low-sulfur diesel fuel). (b) Explain how the emission...
40 CFR 1037.205 - What must I include in my application?
Code of Federal Regulations, 2014 CFR
2014-07-01
... the application (including the test procedures, test parameters, and test fuels) to show you meet the... basic parameters of the vehicle's design and emission controls. List the fuel type on which your vehicles are designed to operate (for example, ultra low-sulfur diesel fuel). (b) Explain how the emission...
Automotive Fuel and Carburetor; Automotive Mechanics 3: 9047.01.
ERIC Educational Resources Information Center
Dade County Public Schools, Miami, FL.
This document presents an outline for a 135-hour course designed to help students become employable with the skills, knowledge, attitudes, and values necessary for performing the required services of the automotive fuel and carburetor systems mechanic. The course is an introduction to the automobile fuel and carburetion systems. Basic manipulative…
40 CFR 1042.840 - Application requirements for remanufactured engines.
Code of Federal Regulations, 2010 CFR
2010-07-01
... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...
40 CFR 1042.840 - Application requirements for remanufactured engines.
Code of Federal Regulations, 2014 CFR
2014-07-01
... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the... as described in the application (including the test procedures, test parameters, and test fuels) to... other basic parameters of the engine's design and emission controls. List the fuel type on which your...
40 CFR 1037.205 - What must I include in my application?
Code of Federal Regulations, 2013 CFR
2013-07-01
... fuel-system components you will install on any production vehicle. Identify the part number of each... basic parameters of the vehicle's design and emission controls. List the fuel type on which your vehicles are designed to operate (for example, ultra low-sulfur diesel fuel). (b) Explain how the emission...
Alternative Fuels Data Center: Ethanol Fuel Basics
ethanol. Ethanol Energy Balance In the United States, 95% of ethanol is produced from the starch in corn demonstrates a positive energy balance, meaning that the process of producing ethanol fuel does not require energy balance of ethanol because the feedstocks are either waste, co-products of another industry (wood
2008-07-01
electric ship with all power generation supplied by a PEM Fuel Cell System. The basic unit of this fuel cell system is being developed by the...substantial problem. Further, as reforming techniques improve in the coming years, the weight of the fuell cells will likely decrease. In comparison to...19 Figure 12: 500 kW ONR Fuel Cell Concept
Fuels, Lubricants, and Coolants. FOS: Fundamentals of Service.
ERIC Educational Resources Information Center
John Deere Co., Moline, IL.
This manual on fuels, lubricants, and coolants is one of a series of power mechanics tests and visual aids on automotive and off-the-road agricultural and construction equipment. Materials present basic information with illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Focusing on fuels, the first of…
Lightning protection guidelines and test data for adhesively bonded aircraft structures
NASA Technical Reports Server (NTRS)
Pryzby, J. E.; Plumer, J. A.
1984-01-01
The highly competitive marketplace and increasing cost of energy has motivated manufacturers of general aviation aircraft to utilize composite materials and metal-to-metal bonding in place of conventional fasteners and rivets to reduce weight, obtain smoother outside surfaces and reduce drag. The purpose of this program is protection of these new structures from hazardous lightning effects. The program began with a survey of advance-technology materials and fabrication methods under consideration for future designs. Sub-element specimens were subjected to simulated lightning voltages and currents. Measurements of bond line voltages, electrical sparking, and mechanical strength degradation were made to comprise a data base of electrical properties for new technology materials and basic structural configurations. The second hase of the program involved tests on full scale wing structures which contained integral fuel tanks and which were representative of examples of new technology structures and fuel systems. The purpose of these tests was to provide a comparison between full scale structural measurements and those obtained from the sub-element specimens.
AGT-102 automotive gas turbine
NASA Technical Reports Server (NTRS)
1981-01-01
Development of a gas turbine powertrain with a 30% fuel economy improvement over a comparable S1 reciprocating engine, operation within 0.41 HC, 3.4 CO, and 0.40 NOx grams per mile emissions levels, and ability to use a variety of alternate fuels is summarized. The powertrain concept consists of a single-shaft engine with a ceramic inner shell for containment of hot gasses and support of twin regenerators. It uses a fixed-geometry, lean, premixed, prevaporized combustor, and a ceramic radial turbine rotor supported by an air-lubricated journal bearing. The engine is coupled to the vehicle through a widerange continuously variable transmission, which utilizes gearing and a variable-ratio metal compression belt. A response assist flywheel is used to achieve acceptable levels of engine response. The package offers a 100 lb weight advantage in a Chrysler K Car front-wheel-drive installation. Initial layout studies, preliminary transient thermal analysis, ceramic inner housing structural analysis, and detailed performance analysis were carried out for the basic engine.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1992-01-01
Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty vehicles from Sports Car America, PUMA Division Incorporated. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, andmore » proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less
Spent fuel container alignment device and method
Jones, Stewart D.; Chapek, George V.
1996-01-01
An alignment device is used with a spent fuel shipping container including a plurality of fuel pockets for spent fuel arranged in an annular array and having a rotatable cover including an access opening therein. The alignment device includes a lightweight plate which is installed over the access opening of the cover. A laser device is mounted on the plate so as to emit a laser beam through a laser admittance window in the cover into the container in the direction of a pre-established target associated with a particular fuel pocket. An indexing arrangement on the container provides an indication of the angular position of the rotatable cover when the laser beam produced by the laser is brought into alignment with the target of the associated fuel pocket.
Fuel cell system for transportation applications
Kumar, Romesh; Ahmed, Shabbir; Krumpelt, Michael; Myles, Kevin M.
1993-01-01
A propulsion system for a vehicle having pairs of front and rear wheels and a fuel tank. An electrically driven motor having an output shaft operatively connected to at least one of said pair of wheels is connected to a fuel cell having a positive electrode and a negative electrode separated by an electrolyte for producing dc power to operate the motor. A partial oxidation reformer is connected both to the fuel tank and to the fuel cell receives hydrogen-containing fuel from the fuel tank and water and air and for partially oxidizing and reforming the fuel with water and air in the presence of an oxidizing catalyst and a reforming catalyst to produce a hydrogen-containing gas. The hydrogen-containing gas is sent from the partial oxidation reformer to the fuel cell negative electrode while air is transported to the fuel cell positive electrode to produce dc power for operating the electric motor.
Fuel cell system for transportation applications
Kumar, R.; Ahmed, S.; Krumpelt, M.; Myles, K.M.
1993-09-28
A propulsion system is described for a vehicle having pairs of front and rear wheels and a fuel tank. An electrically driven motor having an output shaft operatively connected to at least one of said pair of wheels is connected to a fuel cell having a positive electrode and a negative electrode separated by an electrolyte for producing dc power to operate the motor. A partial oxidation reformer is connected both to the fuel tank and to the fuel cell and receives hydrogen-containing fuel from the fuel tank and uses water and air for partially oxidizing and reforming the fuel in the presence of an oxidizing catalyst and a reforming catalyst to produce a hydrogen-containing gas. The hydrogen-containing gas is sent from the partial oxidation reformer to the fuel cell negative electrode while air is transported to the fuel cell positive electrode to produce dc power for operating the electric motor. 3 figures.
Space-Plane Spreadsheet Program
NASA Technical Reports Server (NTRS)
Mackall, Dale
1993-01-01
Basic Hypersonic Data and Equations (HYPERDATA) spreadsheet computer program provides data gained from three analyses of performance of space plane. Equations used to perform analyses derived from Newton's second law of physics, derivation included. First analysis is parametric study of some basic factors affecting ability of space plane to reach orbit. Second includes calculation of thickness of spherical fuel tank. Third produces ratio between volume of fuel and total mass for each of various aircraft. HYPERDATA intended for use on Macintosh(R) series computers running Microsoft Excel 3.0.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) instead of or in addition to distillate diesel fuel (e.g., natural gas, methanol, or nondistillate diesel... Category 1 or Category 2 engines without exhaust aftertreatment obtained using a diesel fuel containing... Category 2 engines without exhaust aftertreatment obtained using diesel fuel containing less than 0.03...
Code of Federal Regulations, 2010 CFR
2010-07-01
...) instead of or in addition to distillate diesel fuel (e.g., natural gas, methanol, or nondistillate diesel... Category 1 or Category 2 engines without exhaust aftertreatment obtained using a diesel fuel containing... Category 2 engines without exhaust aftertreatment obtained using diesel fuel containing less than 0.03...
Nuclear fuel elements having a composite cladding
Gordon, Gerald M.; Cowan, II, Robert L.; Davies, John H.
1983-09-20
An improved nuclear fuel element is disclosed for use in the core of nuclear reactors. The improved nuclear fuel element has a composite cladding of an outer portion forming a substrate having on the inside surface a metal layer selected from the group consisting of copper, nickel, iron and alloys of the foregoing with a gap between the composite cladding and the core of nuclear fuel. The nuclear fuel element comprises a container of the elongated composite cladding, a central core of a body of nuclear fuel material disposed in and partially filling the container and forming an internal cavity in the container, an enclosure integrally secured and sealed at each end of said container and a nuclear fuel material retaining means positioned in the cavity. The metal layer of the composite cladding prevents perforations or failures in the cladding substrate from stress corrosion cracking or from fuel pellet-cladding interaction or both. The substrate of the composite cladding is selected from conventional cladding materials and preferably is a zirconium alloy.
Method for removing acid gases from a gaseous stream
Gorin, Everett; Zielke, Clyde W.
1981-01-01
In a process for hydrocracking a heavy aromatic polynuclear carbonaceous feedstock containing reactive alkaline constituents to produce liquid hydrocarbon fuels boiling below about 475.degree. C. at atmospheric pressure by contacting the feedstock with hydrogen in the presence of a molten metal halide catalyst, thereafter separating a gaseous stream containing hydrogen, at least a portion of the hydrocarbon fuels and acid gases from the molten metal halide and regenerating the molten metal halide, thereby producing a purified molten metal halide stream for recycle to the hydrocracking zone, an improvement comprising; contacting the gaseous acid gas, hydrogen and hydrocarbon fuels-containing stream with the feedstock containing reactive alkaline constituents to remove acid gases from the acid gas containing stream. Optionally at least a portion of the hydrocarbon fuels are separated from gaseous stream containing hydrogen, hydrocarbon fuels and acid gases prior to contacting the gaseous stream with the feedstock.
36 CFR § 702.2 - Conduct on Library premises.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Conduct on Library premises. § 702.2 Section § 702.2 Parks, Forests, and Public Property LIBRARY OF CONGRESS CONDUCT ON LIBRARY PREMISES § 702.2 Conduct on Library premises. (a) All persons using the premises shall conduct themselves...
NASA Technical Reports Server (NTRS)
Srinivasan, Supramaniam; Mukerjee, Sanjeev; Parthasarathy, A.; CesarFerreira, A.; Wakizoe, Masanobu; Rho, Yong Woo; Kim, Junbom; Mosdale, Renaut A.; Paetzold, Ronald F.; Lee, James
1994-01-01
The proton exchange membrane fuel cell (PEMFC) is one of the most promising electrochemical power sources for space and electric vehicle applications. The wide spectrum of R&D activities on PEMFC's, carried out in our Center from 1988 to date, is as follows (1) Electrode Kinetic and Electrocatalysis of Oxygen Reduction; (2) Optimization of Structures of Electrodes and of Membrane and Electrode Assemblies; (3) Selection and Evaluation of Advanced Proton Conducting Membranes and of Operating Conditions to Attain High Energy Efficiency; (4) Modeling Analysis of Fuel Cell Performance and of Thermal and Water Management; and (5) Engineering Design and Development of Multicell Stacks. The accomplishments on these tasks may be summarized as follows: (1) A microelectrode technique was developed to determine the electrode kinetic parameters for the fuel cell reactions and mass transport parameters for the H2 and O2 reactants in the proton conducting membrane. (2) High energy efficiencies and high power densities were demonstrated in PEMFCs with low platinum loading electrodes (0.4 mg/cm(exp 2) or less), advanced membranes and optimized structures of membrane and electrode assemblies, as well as operating conditions. (3) The modeling analyses revealed methods to minimize mass transport limitations, particularly with air as the cathodic reactant; and for efficient thermal and water management. (4) Work is in progress to develop multi-kilowatt stacks with the electrodes containing low platinum loadings.
NASA Astrophysics Data System (ADS)
Stroes-Gascoyne, Simcha; Hamon, Connie J.; Maak, Peter
Recent studies have suggested that microbial activity in highly compacted bentonite (⩾1600 kg/m 3) is severely suppressed. Therefore, it appears that the dry density of emplaced bentonite barriers in a geological repository for nuclear waste may be tailored such that a microbiologically unfavorable environment can be created adjacent to used fuel containers. This would ensure that microbiologically influenced corrosion is a negligible contributor to the overall corrosion process. However, this premise is valid only as long as the emplaced bentonite maintains a uniform high dry density (⩾1600 kg/m 3) because it has been shown that high dry density only suppresses microbial activity but not necessarily eliminates the viable microbial population in bentonite. In a repository, a reduction in the dry density of highly compacted bentonite may occur at a number of interface locations, such as placement gaps, contact regions with materials of different densities and contact points with water-carrying fractures in the rock. Experiments were carried out in our laboratory to examine the effects of a reduction in dry density (from 1600 kg/m 3 to about 1000 kg/m 3) on the recovery of microbial culturability in compacted bentonite. Results showed that upon expansion of compacted bentonite into a void, the resulting reduction in dry density stimulated or restored culturability of indigenous microbes. In a repository this would increase the possibility of in situ activity, which might be detrimental for the longevity of waste containers. Reductions in dry density, therefore, should be minimized or eliminated by adequate design and placement methods of compacted bentonite. Materials compliance models can be used to determine the required as-placed dry densities of bentonite buffer and gap fillings to achieve specific targets for long-term equilibrium dry densities for various container placement room designs. Locations where flowing fractures could be in contact with highly compacted bentonite should either be avoided or grouted adequately to limit contact between bentonite and flowing water. Even if localized enhanced microbial activity at interfaces remains of concern, despite adequate engineering and placement methods, the potential consequences can be assessed and quantified adequately by a combination of in situ activity measurements and modeling calculations.
Mitigating the effect of siloxanes on internal combustion engines using landfill gasses
Besmann, Theodore M
2015-01-06
A waste gas combustion method that includes providing a combustible fuel source, in which the combustible fuel source is composed of at least methane and siloxane gas. A sodium source or magnesium source is mixed with the combustible fuel source. Combustion of the siloxane gas of the combustible fuel source produces a silicon containing product. The sodium source or magnesium source reacts with the silicon containing product to provide a sodium containing glass or sodium containing silicate, or a magnesium containing silicate. By producing the sodium containing glass or sodium containing silicate, or the magnesium containing silicate, or magnesium source for precipitating particulate silica instead of hard coating, the method may reduce or eliminate the formation of silica deposits within the combustion chamber and the exhaust components of the internal combustion engine.
Mitigating the effect of siloxanes on internal combustion engines using landfill gasses
Besmann, Theodore M
2014-01-21
A waste gas combustion method that includes providing a combustible fuel source, in which the combustible fuel source is composed of at least methane and siloxane gas. A sodium source or magnesium source is mixed with the combustible fuel source. Combustion of the siloxane gas of the combustible fuel source produces a silicon containing product. The sodium source or magnesium source reacts with the silicon containing product to provide a sodium containing glass or sodium containing silicate, or a magnesium containing silicate. By producing the sodium containing glass or sodium containing silicate, or the magnesium containing silicate, or magnesium source for precipitating particulate silica instead of hard coating, the method may reduce or eliminate the formation of silica deposits within the combustion chamber and the exhaust components of the internal combustion engine.
Deposit formation in liquid fuels. III - The effect of selected nitrogen compounds on diesel fuel
NASA Technical Reports Server (NTRS)
Worstell, J. H.; Daniel, S. R.; Frauenhoff, G.
1981-01-01
The influence of substituted quinolines, pyrroles, indoles, and pyridines on deposit formation in a diesel fuel is evaluated. Significant increases in deposition rate are found which are dependent upon the basicity of the nitrogen compound within a given compound class. These effects correspond closely with those produced in a Jet A fuel. Removal of highly polar fuel components renders the nitrogen compound influence inoperative. These components are therefore participants in deposit-forming reactions.
FUEL-BREEDER FUEL ELEMENT FOR NUCLEAR REACTOR
Abbott, W.E.; Balent, R.
1958-09-16
A fuel element design to facilitate breeding reactor fuel is described. The fuel element is comprised of a coatainer, a central core of fertile material in the container, a first bonding material surrounding the core, a sheet of fissionable material immediately surrounding the first bonding material, and a second bonding material surrounding the fissionable material and being in coniact with said container.
46 CFR 153.1025 - Motor fuel antiknock compounds.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 5 2011-10-01 2011-10-01 false Motor fuel antiknock compounds. 153.1025 Section 153... Cargo Procedures § 153.1025 Motor fuel antiknock compounds. (a) No person may load or carry any other cargo in a containment system approved for motor fuel antiknock compounds containing lead alkyls except...
46 CFR 153.1025 - Motor fuel antiknock compounds.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 153.1025 Section 153... Cargo Procedures § 153.1025 Motor fuel antiknock compounds. (a) No person may load or carry any other cargo in a containment system approved for motor fuel antiknock compounds containing lead alkyls except...
46 CFR 153.1025 - Motor fuel antiknock compounds.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 5 2014-10-01 2014-10-01 false Motor fuel antiknock compounds. 153.1025 Section 153... Cargo Procedures § 153.1025 Motor fuel antiknock compounds. (a) No person may load or carry any other cargo in a containment system approved for motor fuel antiknock compounds containing lead alkyls except...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-11
... Refineries. Industry 325193 2869 Ethyl alcohol manufacturing. Industry 325199 2869 Other basic organic... as fertilizer).\\2\\ Therefore in the final rule EPA concluded that since biofuel made from the... showed an average yield of 15 dry tons per acre with no nitrogen fertilizer applied after the first year...
40 CFR 1051.205 - What must I include in my application?
Code of Federal Regulations, 2014 CFR
2014-07-01
... emission control devices (AECDs) and all fuel-system components you will install on any production or test... specifications and other basic parameters of the vehicle's design and emission controls. List the fuel type on... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the...
40 CFR 1051.205 - What must I include in my application?
Code of Federal Regulations, 2012 CFR
2012-07-01
... emission control devices (AECDs) and all fuel-system components you will install on any production or test... specifications and other basic parameters of the vehicle's design and emission controls. List the fuel type on... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the...
40 CFR 1051.205 - What must I include in my application?
Code of Federal Regulations, 2013 CFR
2013-07-01
... emission control devices (AECDs) and all fuel-system components you will install on any production or test... specifications and other basic parameters of the vehicle's design and emission controls. List the fuel type on... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the...
40 CFR 1051.205 - What must I include in my application?
Code of Federal Regulations, 2011 CFR
2011-07-01
... emission control devices (AECDs) and all fuel-system components you will install on any production or test... specifications and other basic parameters of the vehicle's design and emission controls. List the fuel type on... scheduled maintenance you did. (g) List the specifications of the test fuel to show that it falls within the...
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
This fact sheet provides a brief introduction to biodiesel, including a discussion of biodiesel blends and specifications. It also covers how biodiesel compares to diesel fuel in terms of performance (including in cold weather) and whether there are adverse effects on engines or other systems. Finally, it discusses biodiesel fuel quality and standards, and compares biodiesel emissions to those of diesel fuel.
Basic principles of forest fuel reduction treatments
James K. Agee; Carl N. Skinner
2005-01-01
Successful fire exclusion in the 20th century has created severe fire problems across the West. Not every forest is at risk of uncharacteristically severe wildfire, but drier forests are in need of active management to mitigate fire hazard. We summarize a set of simple principles important to address in fuel reduction treatments: reduction of surface fuels, increasing...
Fueling the Car of Tomorrow: An Alternative Fuels Curriculum for High School Science Classes
ERIC Educational Resources Information Center
Schumack, Mark; Baker, Stokes; Benvenuto, Mark; Graves, James; Haman, Arthur; Maggio, Daniel
2010-01-01
It is no secret that many high school students are fascinated with automobiles. The activities in "Fueling the Car of Tomorrow"--a free high school science curriculum, available online--(see "On the web")--capitalize on this heightened awareness and provide relevant learning opportunities designed to reinforce basic physics, chemistry, biology,…
NON-CORROSIVE PLUTONIUM FUEL SYSTEMS
Coffinberry, A.S.; Waber, J.T.
1962-10-23
An improved plutonium reactor liquid fuel is described for utilization in a nuclear reactor having a tantalum fuel containment vessel. The fuel consists of plutonium and a diluent such as iron, cobalt, nickel, cerium, cerium-- iron, cerium--cobalt, cerium--nickel, and cerium--copper, and an additive of carbon and silicon. The carbon and silicon react with the tantalum container surface to form a coating that is self-healing and prevents the corrosive action of liquid plutonium on the said tantalum container. (AEC)
The advantages of problem-based curricula.
Dolmans, D.; Schmidt, H.
1996-01-01
Problem-based curricula provide a learning environment in which competence is fostered not primarily by teaching to impart knowledge, but through encouraging an inquisitive style of learning. Preliminary discussion in small groups, contextual learning, integration of knowledge and an emphasis on patient problems, have several cognitive effects on student learning. These effects are increased retention of knowledge, enhancement of integration of basic science concepts into clinical problems, the development of self-directed learning skills, and the enhancement of students' intrinsic interest in the subject matter. In this paper a number of studies will be reviewed that provide empirical evidence for these premises. PMID:8949589
Accessing Earth science data from the EOS data and information system
NASA Technical Reports Server (NTRS)
Mcdonald, Kenneth R.; Calvo, Sherri
1993-01-01
An overview of the Earth Observing System Data and Information System (EOSDIS) is presented, concentrating on the users' interactions with the system and highlighting those features that are driven by the unique requirements of the Global Change Research Program and the supported science community. However, a basic premise of the EOSDIS is that the system must evolve to meet changes in user needs and to incorporate advances in data system technology. Therefore, the development process which is being used to accommodate these changes and some of the potential areas of change are also addressed.
Bansemir, G
1987-01-01
The conception and evaluation of standardized oral or written questioning as quantifying instruments of research orientate by the basic premises of Marxist-Leninist theory of recognition and general scientific logic. In the present contribution the socio-gerontological research process is outlined in extracts. By referring to the intrinsic connection between some of its essential components--problem, formation of hypotheses, obtaining indicators/measurement, preliminary examination, evaluation-as well as to typical errors and (fictitious) examples of practical research, this contribution contrasts the natural, apparently uncomplicated course of structured questioning with its qualitative methodological fundamentals and demands.
Is child abuse a human instinct?
Kuttner, R E
1983-01-01
The modern concept of instinct maintains that certain physical signs or events trigger the release of appropriate behavioural responses. According to Konrad Lorenz and other ethological theorists, the features and proportions of the infant body and face convey a sense of cuteness which releases a protective human instinct. Members of the Lorenz-Tinbergen school may also regard violent crime or war as manifestations of aggressive drives. A survey of medical and sociological literature shows that the rate of abuse and neglect of infants and children is higher than violent crimes against adults, which reveals a contradiction in basic premises.
1986-03-21
i t a t i v e frameworks (e.g., Doyle, Toulmin , P . Cohen), and e f f o r t s t o syn thes i ze l o g i c and p r o b a b i l i t y (Nilsson...logic allows for provisional acceptance of uncer- tain premises, which may later be retracted when they lead to contradictory conclusions. Toulmin (1958...A1 researchers] have accepted without hesitation as impeccable." * The basic framework of an argument, according to Toulmin , is as follows ( Toulmin
Challenge of N95 and P100 Filtering Facepiece Respirators with Particles Containing Viable H1N1
2009-12-02
control of ventilation in healthcare premises. J. Hospital Infection 64:110–114. 8. Tellier R. 2006. Review of Aerosol Transmission of Influenza A Virus...Center, U.S. Army Research Development and Engineering Command, Aberdeen Proving Ground, MD 21010-5423. 17. Heimbuch BK, Wu C-Y, Hodge J, Wander JD
Implementation of the NCSS Guidelines for Teaching Science-Related Social Issues: Exemplar Lessons.
ERIC Educational Resources Information Center
Otto, Robert A., Ed.
This document contains the Guidelines for Teaching Science-Related Social Issues adopted in 1982 by the National Council for the Social Studies and 10 examplar lessons each keyed to particular guidelines and drawing upon contemporary issues. The premise upon which the guidelines are based is that science is a social issue and that the examination…
27 CFR 70.31 - Entry of premises for examination of taxable objects.
Code of Federal Regulations, 2011 CFR
2011-04-01
... by day, enter any plant or any other premises where distilled spirits are produced or rectified, or... premises where spirits are produced or rectified, or any ground adjoining or near to such plant or premises...
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1975-09-30
Studies of reactions between core materials and coolant impurities, basic fission product transport mechanisms, core graphite development and testing, the development and testing of recyclable fuel systems, and physics and fuel management studies are described. Materials studies include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and, where appropriate, the data are presented in tables, graphs, and photographs. (auth)
Multi-Year On-Road Emission Factor Trends of Two Heavy-Duty California Fleets
NASA Astrophysics Data System (ADS)
Haugen, M.; Bishop, G.
2017-12-01
New heavy-duty vehicle emission regulations have resulted in the development of advanced exhaust after-treatment systems that specifically target particulate matter (PM) and nitrogen oxides (NOx = NO + NO2). This has resulted in significant decreases in the emissions of these species. The University of Denver has collected three data sets of on-road gaseous (CO, HC, NO and NOx) and PM (particle mass, black carbon and particle number) emission measurements from heavy-duty vehicles (HDVs) in the spring of 2013, 2015 and 2017 at two different locations in California. One site is located at the Port of Los Angeles, CA (1,150 HDVs measured in 2017) and the other site is located at a weigh station in Northern California near Cottonwood, CA (780 HDVs measured in 2017). The On-Road Heavy-Duty Measurement Setup measures individual HDV's fuel specific emissions (DOI: 10.1021/acs.est.6b06172). Vehicles drive under a tent-like structure that encapsulates vehicle exhaust and 15 seconds of data collection is integrated to give fuel specific information. The measurements obtained from these campaigns contain real-world emissions affected by different driving modes, after-treatment systems and location. The Port of Los Angeles contributes a fleet that is fully equipped with diesel particulate filters (DPFs) as a result of the San Pedro Ports Clean Air Action Plan enforced since 2010 that allows only vehicles model year 2007 or newer on the premises. This fleet, although comprised with relatively new HDVs with lower PM emissions, has increased PM emissions as it has aged. Cottonwood's fleet contains vehicles with and without after-treatment systems, a result of a gradual turnover rate, and fleet PM has decreased at a slower rate than at the Port of Los Angeles. The decrease in PM emissions is a result of more HDVs being newer model years as well as older model years being retrofit with DPFs. The complimentary fleets, studied over multiple years, have given the University of Denver an extensive data repository to quantify on-road vehicle emission trends on individual vehicles as well as categories of vehicles. Here, the 2017 campaign results will be discussed and compared to previous campaigns.
NASA Astrophysics Data System (ADS)
Hu, Shaoyan; Zhu, Rong; Dong, Kai; Liu, Runzao
2018-06-01
Coherent jet technology is widely used in the electric arc furnace (EAF) steelmaking process to deliver more energy and momentum into the molten steel bath. Meanwhile, the characteristics of a coherent jet using pure CH4 as the fuel gas have been well investigated in previous studies. To reduce the consumption of CH4, coherent jet technology using "CH4 + N2" mixed fuel gas instead of pure CH4 was proposed and studied in detail by numerical simulation in the present work. The Eddy Dissipation Concept model, which has detailed chemical kinetic mechanisms, was adopted to model the fuel gas combustion reactions. Experimental measurements were carried out to validate the accuracy of the computational model. The present study shows that the jet characteristics of the main oxygen improve along with the increase of the CH4 ratio in fuel gas and with the increase of the flow rate of fuel gas. When the CH4 ratio in the fuel gas is 25 pct, the fuel gas flow rate only has a limited influence on the jet characteristics, unlike the rest of the fuel gas compositions, because a high N2 proportion deteriorates the combustion performance and leads to severe incomplete combustion. Moreover, a false potential core phenomenon was observed and explained in the present study. Based on the average values, the jet length of a coherent jet with 75 pct CH4 can achieve 89.8 pct of that with 100 pct CH4. Finally, an industrial experiment was carried out on a commercial 100t EAF using coherent jet with 75 pct CH4, showing that the average CH4 consumption was reduced from 3.84 to 3.05 Nm3 t-1 under the premise of no obvious changes in the other production indexes.
Code of Federal Regulations, 2010 CFR
2010-07-01
... obtaining a certificate of conformity and producing portable fuel containers under it? 59.622 Section 59.622... Emissions From New and In-Use Portable Fuel Containers Certifying Emission Families § 59.622 What are the general requirements for obtaining a certificate of conformity and producing portable fuel containers...
46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a ventilation...
46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a ventilation...
46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a ventilation...
46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a ventilation...
46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a ventilation...
1990 fuel cell seminar: Program and abstracts
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1990-12-31
This volume contains author prepared short resumes of the presentations at the 1990 Fuel Cell Seminar held November 25-28, 1990 in Phoenix, Arizona. Contained herein are 134 short descriptions organized into topic areas entitled An Environmental Overview, Transportation Applications, Technology Advancements for Molten Carbonate Fuel Cells, Technology Advancements for Solid Fuel Cells, Component Technologies and Systems Analysis, Stationary Power Applications, Marine and Space Applications, Technology Advancements for Acid Type Fuel Cells, and Technology Advancement for Solid Oxide Fuel Cells.
ETHNOBOTANICAL ASPECTS OF SOME PLANTS OF ARAVALLI HILLS IN NORTH GUJARAT
Punjani, Bhasker L.
2002-01-01
The Aravalli ranges run along the Sabarkantha district is the ancient region of India, inhibited by tribals living in close vicinity of enriched forest. The present paper contains various ethnobotanical aspects of some plant species used by the tribals for their day-to day requirement. The paper includes the first hand information collected through tribal informants, medicinemen and tribal people of several villages during the field trips in the region for last three years in different seasons. The paper provides an account of the ethnobotanical uses for basic necessities and welfare of tribal life, medicine and hygiene, fuel fodder, fibres food, shelter, dye, oil and other miscellaneous purposes. PMID:22557066
Dual-fuel, dual-throat engine preliminary analysis
NASA Technical Reports Server (NTRS)
Obrien, C. J.
1979-01-01
A propulsion system analysis of the dual fuel, dual throat engine for launch vehicle applications was conducted. Basic dual throat engine characterization data were obtained to allow vehicle optimization studies to be conducted. A preliminary baseline engine system was defined.
High performance, high durability non-precious metal fuel cell catalysts
Wood, Thomas E.; Atanasoski, Radoslav; Schmoeckel, Alison K.
2016-03-15
This invention relates to non-precious metal fuel cell cathode catalysts, fuel cells that contain these catalysts, and methods of making the same. The fuel cell cathode catalysts are highly nitrogenated carbon materials that can contain a transition metal. The highly nitrogenated carbon materials can be supported on a nanoparticle substrate.
Fuel and Food Are Not Made of Energy-- A Constructive View of Respiration and Combustion
ERIC Educational Resources Information Center
Ross, Keith
2013-01-01
We often say that food and fuels "contain" energy, whereas energy is stored in the fuel-oxygen system generated during photosynthesis. This article suggests revised approaches to teaching that make a clear distinction between matter (food, fuel, oxygen) and energy. (Contains 1 table, 5 boxes, and 6 figures.)
Palliative effects of H2 on SOFCs operating with carbon containing fuels
NASA Astrophysics Data System (ADS)
Reeping, Kyle W.; Bohn, Jessie M.; Walker, Robert A.
2017-12-01
Chlorine can accelerate degradation of solid oxide fuel cell (SOFC) Ni-based anodes operating on carbon containing fuels through several different mechanisms. However, supplementing the fuel with a small percentage of excess molecular hydrogen effectively masks the degradation to the catalytic activity of the Ni and carbon fuel cracking reaction reactions. Experiments described in this work explore the chemistry behind the "palliative" effect of hydrogen on SOFCs operating with chlorine-contaminated, carbon-containing fuels using a suite of independent, complementary techniques. Operando Raman spectroscopy is used to monitor carbon accumulation and, by inference, Ni catalytic activity while electrochemical techniques including electrochemical impedance spectroscopy and voltammetry are used to monitor overall cell performance. Briefly, hydrogen not only completely hides degradation observed with chlorine-contaminated carbon-containing fuels, but also actively removes adsorbed chlorine from the surface of the Ni, allowing for the methane cracking reaction to continue, albeit at a slower rate. When hydrogen is removed from the fuel stream the cell fails immediately due to chlorine occupation of methane/biogas reaction sites.
Basso, César; Caffera, Ruben M; García da Rosa, Elsa; Lairihoy, Rosario; González, Cristina; Norbis, Walter; Roche, Ingrid
2012-12-01
A study was conducted in the city of Salto, Uruguay, to identify mosquito-producing containers, the spatial distribution of mosquitoes and the relationship between the different population indices of Aedes aegypti. On each of 312 premises visited, water-filled containers and immature Ae. aegypti mosquitoes were identified. The containers were counted and classified into six categories. Pupae per person and Stegomyia indices were calculated. Pupae per person were represented spatially. The number of each type of container and number of mosquitoes in each were analyzed and compared, and their spatial distribution was analyzed. No significant differences in the number of the different types of containers with mosquitoes or in the number of mosquitoes in each were found. The distribution of the containers with mosquito was random and the distribution of mosquitoes by type of container was aggregated or highly aggregated.
Basso, César; Caffera, Ruben M.; García da Rosa, Elsa; Lairihoy, Rosario; González, Cristina; Norbis, Walter; Roche, Ingrid
2012-01-01
A study was conducted in the city of Salto, Uruguay, to identify mosquito-producing containers, the spatial distribution of mosquitoes and the relationship between the different population indices of Aedes aegypti. On each of 312 premises visited, water-filled containers and immature Ae. aegypti mosquitoes were identified. The containers were counted and classified into six categories. Pupae per person and Stegomyia indices were calculated. Pupae per person were represented spatially. The number of each type of container and number of mosquitoes in each were analyzed and compared, and their spatial distribution was analyzed. No significant differences in the number of the different types of containers with mosquitoes or in the number of mosquitoes in each were found. The distribution of the containers with mosquito was random and the distribution of mosquitoes by type of container was aggregated or highly aggregated. PMID:23128295
Polynuclear aromatic hydrocarbons for fullerene synthesis in flames
Alford, J. Michael; Diener, Michael D.
2006-12-19
This invention provides improved methods for combustion synthesis of carbon nanomaterials, including fullerenes, employing multiple-ring aromatic hydrocarbon fuels selected for high carbon conversion to extractable fullerenes. The multiple-ring aromatic hydrocarbon fuels include those that contain polynuclear aromatic hydrocarbons. More specifically, multiple-ring aromatic hydrocarbon fuels contain a substantial amount of indene, methylnapthalenes or mixtures thereof. Coal tar and petroleum distillate fractions provide low cost hydrocarbon fuels containing polynuclear aromatic hydrocarbons, including without limitation, indene, methylnapthalenes or mixtures thereof.
Apparatus tube configuration and mounting for solid oxide fuel cells
Zymboly, G.E.
1993-09-14
A generator apparatus is made containing long, hollow, tubular, fuel cells containing an inner air electrode, an outer fuel electrode, and solid electrolyte there between, placed between a fuel distribution board and a board which separates the combustion chamber from the generating chamber, where each fuel cell has an insertable open end and in insertable, plugged, closed end, the plugged end being inserted into the fuel distribution board and the open end being inserted through the separator board where the plug is completely within the fuel distribution board. 3 figures.
Connections for solid oxide fuel cells
Collie, Jeffrey C.
1999-01-01
A connection for fuel cell assemblies is disclosed. The connection includes compliant members connected to individual fuel cells and a rigid member connected to the compliant members. Adjacent bundles or modules of fuel cells are connected together by mechanically joining their rigid members. The compliant/rigid connection permits construction of generator fuel cell stacks from basic modular groups of cells of any desired size. The connections can be made prior to installation of the fuel cells in a generator, thereby eliminating the need for in-situ completion of the connections. In addition to allowing pre-fabrication, the compliant/rigid connections also simplify removal and replacement of sections of a generator fuel cell stack.
Electrical start-up for diesel fuel processing in a fuel-cell-based auxiliary power unit
NASA Astrophysics Data System (ADS)
Samsun, Remzi Can; Krupp, Carsten; Tschauder, Andreas; Peters, Ralf; Stolten, Detlef
2016-01-01
As auxiliary power units in trucks and aircraft, fuel cell systems with a diesel and kerosene reforming capacity offer the dual benefit of reduced emissions and fuel consumption. In order to be commercially viable, these systems require a quick start-up time with low energy input. In pursuit of this end, this paper reports an electrical start-up strategy for diesel fuel processing. A transient computational fluid dynamics model is developed to optimize the start-up procedure of the fuel processor in the 28 kWth power class. The temperature trend observed in the experiments is reproducible to a high degree of accuracy using a dual-cell approach in ANSYS Fluent. Starting from a basic strategy, different options are considered for accelerating system start-up. The start-up time is reduced from 22 min in the basic case to 9.5 min, at an energy consumption of 0.4 kW h. Furthermore, an electrical wire is installed in the reformer to test the steam generation during start-up. The experimental results reveal that the generation of steam at 450 °C is possible within seconds after water addition to the reformer. As a result, the fuel processor can be started in autothermal reformer mode using the electrical concept developed in this work.
Conversion of vegetable oils and animal fats into paraffinic cetane enhancers for diesel fuels
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wong, A.; Feng, Y.; Hogan, E.
1995-11-01
The two principal methods of producing biodiesel fuels are (a) transesterification of vegetable oils and animal fats with a monohydric alcohol, and (b) direct hydrotreating of tree oils, vegetable oils and animal fats. The patented hydrotreating technology is based on the catalytic processing of biomass oils and fats with hydrogen, under elevated temperature and pressure conditions. The typical mix of hydrotreated products is as follows: 5-15% light distillate (naphta), 40-60% middle distillate (cetane), 5-15% heavy distillate and 5-10% burner gas. The naptha fraction may be used as a gasoline supplement. The middle distillate is designed for use as a cetanemore » booster for diesel fuels. Both heavy distillate and light hydrocarbon gases are usable as power boiler fuels. Typically, the cetane enhancer would be admixed with diesel fuel in the range of 5 to 30% by volume. This new diesel blend meets the essential quality characteristics of the basic diesel fuel, for direct use in diesel engines without any modifications. The basic hydrotreatment technology has been evaluated further in the laboratory on degummed soya oil, yellow grease and animal tallow. The preliminary findings suggest that the technology can provide efficient conversion of these materials into cetane enhancers for diesel fuels.« less
Nuclear fuel element with axially aligned fuel pellets and fuel microspheres therein
Sease, J.D.; Harrington, F.E.
1973-12-11
Elongated single- and multi-region fuel elements are prepared by replacing within a cladding container a coarse fraction of fuel material which includes plutonium and uranium in the appropriate regions of the fuel element and then infiltrating with vibration a fine-sized fraction of uranium-containing microspheres throughout all interstices in the coarse material in a single loading. The fine, rigid material defines a thin annular layer between the coarse fraction and the cladding to reduce adverse mechanical and chemical interactions. (Official Gazette)
Container for reprocessing and permanent storage of spent nuclear fuel assemblies
Forsberg, Charles W.
1992-01-01
A single canister process container for reprocessing and permanent storage of spent nuclear fuel assemblies comprising zirconium-based cladding and fuel, which process container comprises a collapsible container, having side walls that are made of a high temperature alloy and an array of collapsible support means wherein the container is capable of withstanding temperature necessary to oxidize the zirconium-based cladding and having sufficient ductility to maintain integrity when collapsed under pressure. The support means is also capable of maintaining their integrity at temperature necessary to oxide the zirconium-based cladding. The process container also has means to introduce and remove fluids to and from the container.
Daly, Justine B; Campbell, Elizabeth M; Wiggers, John H; Considine, Robyn J
2002-06-01
This study aimed to determine the prevalence of responsible hospitality policies in a group of licensed premises associated with alcohol-related harm. During March 1999, 108 licensed premises with one or more police-identified alcohol-related incidents in the previous 3 months received a visit from a police officer. A 30-item audit checklist was used to determine the responsible hospitality policies being undertaken by each premises within eight policy domains: display required signage (three items); responsible host practices to prevent intoxication and under-age drinking (five items); written policies and guidelines for responsible service (three items); discouraging inappropriate promotions (three items); safe transport (two items); responsible management issues (seven items); physical environment (three items) and entry conditions (four items). No premises were undertaking all 30 items. Eighty per cent of the premises were undertaking 20 of the 30 items. All premises were undertaking at least 17 of the items. The proportion of premises undertaking individual items ranged from 16% to 100%. Premises were less likely to report having and providing written responsible hospitality documentation to staff, using door charges and having entry/re-entry rules. Significant differences between rural and urban premises were evident for four policies. Clubs were significantly more likely than hotels to have a written responsible service of alcohol policy and to clearly display codes of dress and conditions of entry. This study provides an indication of the extent and nature of responsible hospitality policies in a sample of licensed premises that are associated with a broad range of alcohol related harms. The finding that a large majority of such premises appear to adopt responsible hospitality policies suggests a need to assess the validity and reliability of tools used in the routine assessment of such policies, and of the potential for harm from licensed premises.
Casswell, Sally; Huckle, Taisia; Wall, Martin; Parker, Karl
2016-02-01
Our goal was to investigate the role of behaviors amenable to policy change in mediating the relationship between alcohol consumption in off and on premises, age, and 2 measures of socioeconomic status (education and income). A cross-sectional general population survey was analyzed by using Bayesian path analysis to understand direct and mediating pathways. A total of 1,900 drinkers (past 6 months), aged 18 to 65 years, living in households with landline phones participated in the study. Measures were as follows: typical quantities of alcohol consumed per occasion, frequency of drinking, both off and on premise; gender, age groups; and years of education, personal income, prices paid, time of purchase, and liking for alcohol advertisements. Later times of purchase predicted larger quantities consumed (on and off premise) and more frequent drinking (on premise only). Younger people and males purchased later, and this mediated their heavier consumption. Lower prices paid predicted larger quantities consumed (on premise) and higher frequency of drinking (off premise). Younger and male respondents paid lower prices, and this mediated larger quantities consumed on premise and more frequent drinking off premise. Less well educated paid lower prices, and this mediated drinking more frequently off premise among this group. Liking for alcohol ads predicted drinking larger quantities and higher frequency both off and on premise. Younger and male respondents reported greater liking for ads, and this mediated their consumption of larger quantities and more frequent drinking both on and off premise. Those with higher income drank larger amounts on premise and more frequently on and off, but there were no mediating effects from the policy-relevant variables. Heavier drinking patterns by young people and those less well educated could be ameliorated by attention to alcohol policy. Copyright © 2016 by the Research Society on Alcoholism.
Firestone, Simon M; Schemann, Kathrin A; Toribio, Jenny-Ann L M L; Ward, Michael P; Dhand, Navneet K
2011-06-01
The 2007 epidemic of equine influenza in Australia provided an opportunity to investigate the effectiveness of on-farm biosecurity measures in preventing the spread of a novel pathogen in a largely naive population. We conducted a case-control study of 200 horse premises from highly affected regions of the state of New South Wales (NSW), to investigate risk factors for the spread of equine influenza onto horse premises, specifically, non-compliance with biosecurity measures recommended to horse owners by the relevant animal health authority, the NSW Department of Primary Industries. The study was restricted to cases occurring during the first seven weeks of the epidemic, a period prior to vaccination and the relaxation of some movement restrictions. Case and control premises were selected from a laboratory testing dataset and interviews were conducted with horse owners and managers on premises between July and November 2009. The proximity of premises to the nearest infected premises was the factor most strongly associated with case status. Case premises were more likely than control premises to be within 5 km and beyond 10 km of an infected premises. Having a footbath in place on the premises before any horses were infected was associated with a nearly four-fold reduction in odds of infection (odds ratio=0.27; 95% confidence interval: 0.09, 0.83). This protective association may have reflected overall premises biosecurity standards related to the fomite transmission of equine influenza. Compliance with certain on-farm biosecurity practices seemingly prevented horses on premises in high risk areas being infected with equine influenza during the 2007 outbreak in Australia. In future outbreaks, in addition to broader disease control measures, on-farm biosecurity practices should be adopted by horse owners and managers to prevent equine influenza spread. Copyright © 2011 Elsevier B.V. All rights reserved.
47 CFR 32.2321 - Customer premises wiring.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 2 2010-10-01 2010-10-01 false Customer premises wiring. 32.2321 Section 32... Customer premises wiring. (a) This account shall include all amounts transferred from the former Account 232, Station Connections, inside wiring subclass. (b) Embedded Customer Premises Wiring is that...
Combustion research activities at the Gas Turbine Research Institute
NASA Technical Reports Server (NTRS)
Shao, Zhongpu
1986-01-01
The Gas Turbine Research Institute (GTRI) is responsible mainly for basic research in aeronautical propulsion. An annular diffuser for the turbofan augmentor, combustor ignition performance, combustor airflow distribution, fuel injectors, a vaporizer fuel injector, and an airblast atomizer are discussed.